diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index bf8890e..e8d69b0 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -366,8 +366,7 @@
 	  read the Ethernet-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>.  This module will
+	  To compile this driver as a module, choose M here. This module will
 	  be called mac89x0.
 
 config MACSONIC
@@ -380,8 +379,7 @@
 	  one of these say Y and read the Ethernet-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>.  This module will
+	  To compile this driver as a module, choose M here. This module will
 	  be called macsonic.
 
 config MACMACE
@@ -619,8 +617,7 @@
 	  have problems.  Some people suggest to ping ("man ping") a nearby
 	  machine every minute ("man cron") when using this card.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>. The module
+	  To compile this driver as a module, choose M here. The module
 	  will be called 3c501.
 
 config EL2
@@ -632,8 +629,7 @@
 	  the Ethernet-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>. The module
+	  To compile this driver as a module, choose M here. The module
 	  will be called 3c503.
 
 config ELPLUS
@@ -645,8 +641,7 @@
 	  this type, say Y and read the Ethernet-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>. The module
+	  To compile this driver as a module, choose M here. The module
 	  will be called 3c505.
 
 config EL16
@@ -657,8 +652,7 @@
 	  the Ethernet-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>. The module
+	  To compile this driver as a module, choose M here. The module
 	  will be called 3c507.
 
 config EL3
@@ -673,8 +667,7 @@
 	  setup disk to disable Plug & Play mode, and to select the default
 	  media type.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>. The module
+	  To compile this driver as a module, choose M here. The module
 	  will be called 3c509.
 
 config 3C515
@@ -685,8 +678,7 @@
 	  network card, say Y and read the Ethernet-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>. The module
+	  To compile this driver as a module, choose M here. The module
 	  will be called 3c515.
 
 config ELMC
@@ -697,8 +689,7 @@
 	  the Ethernet-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>. The module
+	  To compile this driver as a module, choose M here. The module
 	  will be called 3c523.
 
 config ELMC_II
@@ -709,8 +700,7 @@
 	  the Ethernet-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>. The module
+	  To compile this driver as a module, choose M here. The module
 	  will be called 3c527.
 
 config VORTEX
@@ -733,8 +723,7 @@
 	  <file:Documentation/networking/vortex.txt> and in the comments at
 	  the beginning of <file:drivers/net/3c59x.c>.
 
-	  To compile this support as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>.
+	  To compile this support as a module, choose M here.
 
 config TYPHOON
 	tristate "3cr990 series \"Typhoon\" support"
@@ -751,8 +740,7 @@
 	  the Ethernet-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>. The module
+	  To compile this driver as a module, choose M here. The module
 	  will be called typhoon.
 
 config LANCE
@@ -789,8 +777,7 @@
 	  the Ethernet-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>. The module
+	  To compile this driver as a module, choose M here. The module
 	  will be called wd.
 
 config ULTRAMCA
@@ -802,8 +789,7 @@
 	  an MCA based system (PS/2), say Y and read the Ethernet-HOWTO,
 	  available from <http://www.tldp.org/docs.html#howto>.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>. The module
+	  To compile this driver as a module, choose M here. The module
 	  will be called smc-mca.
 
 config ULTRA
@@ -822,8 +808,7 @@
 	  this but keep it in mind if you have such a SCSI card and have
 	  problems.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>. The module
+	  To compile this driver as a module, choose M here. The module
 	  will be called smc-ultra.
 
 config ULTRA32
@@ -835,8 +820,7 @@
 	  the Ethernet-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>. The module
+	  To compile this driver as a module, choose M here. The module
 	  will be called smc-ultra32.
 
 config BFIN_MAC
@@ -897,8 +881,7 @@
 	  <file:Documentation/networking/smc9.txt> and the Ethernet-HOWTO,
 	  available from <http://www.tldp.org/docs.html#howto>.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>. The module
+	  To compile this driver as a module, choose M here. The module
 	  will be called smc9194.
 
 config SMC91X
@@ -916,8 +899,7 @@
 	  This driver is also available as a module ( = code which can be
 	  inserted in and removed from the running kernel whenever you want).
 	  The module will be called smc91x.  If you want to compile it as a
-	  module, say M here and read <file:Documentation/kbuild/modules.txt>
-	  as well as <file:Documentation/networking/net-modules.txt>.
+	  module, say M here and read <file:Documentation/kbuild/modules.txt>.
 
 config NET_NETX
 	tristate "NetX Ethernet support"
@@ -926,8 +908,7 @@
 	help
 	  This is support for the Hilscher netX builtin Ethernet ports
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>. The module
+	  To compile this driver as a module, choose M here. The module
 	  will be called netx-eth.
 
 config DM9000
@@ -938,9 +919,8 @@
 	---help---
 	  Support for DM9000 chipset.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>.  The module will be
-	  called dm9000.
+	  To compile this driver as a module, choose M here.  The module
+	  will be called dm9000.
 
 config SMC911X
 	tristate "SMSC LAN911[5678] support"
@@ -980,8 +960,7 @@
 	  <http://www.tldp.org/docs.html#howto>. Note that this is still
 	  experimental code.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>. The module
+	  To compile this driver as a module, choose M here. The module
 	  will be called ni5010.
 
 config NI52
@@ -992,8 +971,7 @@
 	  the Ethernet-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>. The module
+	  To compile this driver as a module, choose M here. The module
 	  will be called ni52.
 
 config NI65
@@ -1004,8 +982,7 @@
 	  the Ethernet-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>. The module
+	  To compile this driver as a module, choose M here. The module
 	  will be called ni65.
 
 source "drivers/net/tulip/Kconfig"
@@ -1019,8 +996,7 @@
 	  the Ethernet-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>. The module
+	  To compile this driver as a module, choose M here. The module
 	  will be called at1700.
 
 config DEPCA
@@ -1033,8 +1009,7 @@
 	  <http://www.tldp.org/docs.html#howto> as well as
 	  <file:drivers/net/depca.c>.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>. The module
+	  To compile this driver as a module, choose M here. The module
 	  will be called depca.
 
 config HP100
@@ -1045,8 +1020,7 @@
 	  the Ethernet-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>. The module
+	  To compile this driver as a module, choose M here. The module
 	  will be called hp100.
 
 config NET_ISA
@@ -1075,8 +1049,7 @@
 	  the Ethernet-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>. The module
+	  To compile this driver as a module, choose M here. The module
 	  will be called e2100.
 
 config EWRK3
@@ -1090,8 +1063,7 @@
 	  well as the Ethernet-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>. The module
+	  To compile this driver as a module, choose M here. The module
 	  will be called ewrk3.
 
 config EEXPRESS
@@ -1105,8 +1077,7 @@
 	  because the driver was very unreliable. We now have a new driver
 	  that should do better.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>. The module
+	  To compile this driver as a module, choose M here. The module
 	  will be called eexpress.
 
 config EEXPRESS_PRO
@@ -1119,8 +1090,7 @@
 	  driver.  Please read the Ethernet-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>. The module
+	  To compile this driver as a module, choose M here. The module
 	  will be called eepro.
 
 config HPLAN_PLUS
@@ -1132,8 +1102,7 @@
 	  the Ethernet-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>. The module
+	  To compile this driver as a module, choose M here. The module
 	  will be called hp-plus.
 
 config HPLAN
@@ -1145,8 +1114,7 @@
 	  the Ethernet-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>. The module
+	  To compile this driver as a module, choose M here. The module
 	  will be called hp.
 
 config LP486E
@@ -1165,8 +1133,7 @@
 	  the Ethernet-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>. The module
+	  To compile this driver as a module, choose M here. The module
 	  will be called eth16i.
 
 config NE2000
@@ -1186,8 +1153,7 @@
 	  laptops), say N here and Y to "NE/2 (ne2000 MCA version) support",
 	  below.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>. The module
+	  To compile this driver as a module, choose M here. The module
 	  will be called ne.
 
 config ZNET
@@ -1208,8 +1174,7 @@
 	  is for you, read the Ethernet-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>. The module
+	  To compile this driver as a module, choose M here. The module
 	  will be called seeq8005.
 
 config NE2_MCA
@@ -1221,8 +1186,7 @@
 	  the Ethernet-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>. The module
+	  To compile this driver as a module, choose M here. The module
 	  will be called ne2.
 
 config IBMLANA
@@ -1233,8 +1197,7 @@
 	  CONFIG_MCA to use this driver.  It is both available as an in-kernel
 	  driver and as a module.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>. The only
+	  To compile this driver as a module, choose M here. The only
 	  currently supported card is the IBM LAN Adapter/A for Ethernet.  It
 	  will both support 16K and 32K memory windows, however a 32K window
 	  gives a better security against packet losses.  Usage of multiple
@@ -1248,8 +1211,7 @@
 	  This driver supports virtual ethernet adapters on newer IBM iSeries
 	  and pSeries systems.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>. The module will
+	  To compile this driver as a module, choose M here. The module will
 	  be called ibmveth.
 
 source "drivers/net/ibm_emac/Kconfig"
@@ -1279,8 +1241,7 @@
 	  answer Y here and read the Ethernet-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>. The module
+	  To compile this driver as a module, choose M here. The module
 	  will be called pcnet32.
 
 config PCNET32_NAPI
@@ -1307,8 +1268,7 @@
 	  answer Y here and read the Ethernet-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>. The module
+	  To compile this driver as a module, choose M here. The module
 	  will be called amd8111e.
 
 config AMD8111E_NAPI
@@ -1362,8 +1322,7 @@
 	  the Ethernet-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>. The module
+	  To compile this driver as a module, choose M here. The module
 	  will be called ac3200.
 
 config APRICOT
@@ -1374,9 +1333,8 @@
 	  read the Ethernet-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>.  The module will be
-	  called apricot.
+	  To compile this driver as a module, choose M here. The module
+	  will be called apricot.
 
 config B44
 	tristate "Broadcom 440x/47xx ethernet support"
@@ -1388,9 +1346,8 @@
 	  or M and read the Ethernet-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>.  The module will be
-	  called b44.
+	  To compile this driver as a module, choose M here. The module
+	  will be called b44.
 
 # Auto-select SSB PCI-HOST support, if possible
 config B44_PCI_AUTOSELECT
@@ -1419,9 +1376,8 @@
 	  read the Ethernet-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>.  The module will be
-	  called forcedeth.
+	  To compile this driver as a module, choose M here. The module
+	  will be called forcedeth.
 
 config FORCEDETH_NAPI
 	bool "Use Rx Polling (NAPI) (EXPERIMENTAL)"
@@ -1447,9 +1403,8 @@
 	  <http://www.tldp.org/docs.html#howto> as well as
 	  <file:Documentation/networking/cs89x0.txt>.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>.  The module will be
-	  called cs89x0.
+	  To compile this driver as a module, choose M here. The module
+	  will be called cs89x0.
 
 config TC35815
 	tristate "TOSHIBA TC35815 Ethernet support"
@@ -1465,8 +1420,7 @@
 	  card, say Y and read the Ethernet-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>.  The module
+	  To compile this driver as a module, choose M here. The module
 	  will be called eepro100.
 
 
@@ -1493,8 +1447,7 @@
 	  More specific information on configuring the driver is in 
 	  <file:Documentation/networking/e100.txt>.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>.  The module
+	  To compile this driver as a module, choose M here. The module
 	  will be called e100.
 
 config LNE390
@@ -1506,8 +1459,7 @@
 	  the Ethernet-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>.  The module
+	  To compile this driver as a module, choose M here. The module
 	  will be called lne390.
 
 config FEALNX
@@ -1547,8 +1499,7 @@
 	  NetVin NV5000SC   Via 86C926      SureCom NE34   Winbond
 	  Holtek HT80232    Holtek HT80229
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>.  The module
+	  To compile this driver as a module, choose M here. The module
 	  will be called ne2k-pci.
 
 config NE3210
@@ -1561,8 +1512,7 @@
 	  <http://www.tldp.org/docs.html#howto>.  Note that this driver
 	  will NOT WORK for NE3200 cards as they are completely different.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>.  The module
+	  To compile this driver as a module, choose M here. The module
 	  will be called ne3210.
 
 config ES3210
@@ -1574,8 +1524,7 @@
 	  the Ethernet-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>.  The module
+	  To compile this driver as a module, choose M here. The module
 	  will be called es3210.
 
 config 8139CP
@@ -1705,8 +1654,7 @@
 	  Compaq NetFlex and Olicom cards.  Please read the file
 	  <file:Documentation/networking/tlan.txt> for more details.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>. The module
+	  To compile this driver as a module, choose M here. The module
 	  will be called tlan.
 
 	  Please email feedback to <torben.mathiasen@compaq.com>.
@@ -1996,8 +1944,7 @@
 	  More specific information on configuring the driver is in 
 	  <file:Documentation/networking/e1000.txt>.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>.  The module
+	  To compile this driver as a module, choose M here. The module
 	  will be called e1000.
 
 config E1000_NAPI
@@ -2042,8 +1989,7 @@
 	  More specific information on configuring the driver is in
 	  <file:Documentation/networking/e1000e.txt>.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>.  The module
+	  To compile this driver as a module, choose M here. The module
 	  will be called e1000e.
 
 source "drivers/net/ixp2000/Kconfig"
@@ -2076,8 +2022,7 @@
 	  the Ethernet-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>.  The module will be
+	  To compile this driver as a module, choose M here. The module will be
 	  called hamachi.
 
 config YELLOWFIN
@@ -2526,8 +2471,7 @@
 	  More specific information on configuring the driver is in
 	  <file:Documentation/networking/ixgbe.txt>.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>.  The module
+	  To compile this driver as a module, choose M here. The module
 	  will be called ixgbe.
 
 config IXGB
@@ -2549,8 +2493,7 @@
 	  More specific information on configuring the driver is in 
 	  <file:Documentation/networking/ixgb.txt>.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>.  The module
+	  To compile this driver as a module, choose M here. The module
 	  will be called ixgb.
 
 config IXGB_NAPI
@@ -2603,8 +2546,7 @@
 
 	  <http://www.myri.com/scs/download-Myri10GE.html>
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>.  The module
+	  To compile this driver as a module, choose M here. The module
 	  will be called myri10ge.
 
 config NETXEN_NIC
@@ -2828,10 +2770,9 @@
 	  with the PLIP support in Linux versions 1.0.x.  This option enlarges
 	  your kernel by about 8 KB.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>.  The module will be
-	  called plip.  If unsure, say Y or M, in case you buy a laptop
-	  later.
+	  To compile this driver as a module, choose M here. The module
+	  will be called plip. If unsure, say Y or M, in case you buy
+	  a laptop later.
 
 config PPP
 	tristate "PPP (point-to-point protocol) support"
@@ -2861,8 +2802,7 @@
 	  If you said Y to "Version information on all symbols" above, then
 	  you cannot compile the PPP driver into the kernel; you can then only
 	  compile it as a module. To compile this driver as a module, choose M
-	  here and read <file:Documentation/networking/net-modules.txt>.
-	  The module will be called ppp_generic.
+	  here. The module will be called ppp_generic.
 
 config PPP_MULTILINK
 	bool "PPP multilink support (EXPERIMENTAL)"
@@ -3023,9 +2963,8 @@
 	  <http://www.bart.nl/~patrickr/term-howto/Term-HOWTO.html>). SLIP
 	  support will enlarge your kernel by about 4 KB. If unsure, say N.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>. The module will be
-	  called slip.
+	  To compile this driver as a module, choose M here. The module
+	  will be called slip.
 
 config SLIP_COMPRESSED
 	bool "CSLIP compressed headers"