ALSA: cs5535audio: OLPC analog input support
This is a 2nd cut at adding support for OLPC analog input.
Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com>
Signed-off-by: Andres Salomon <dilinger@debian.org>
diff --git a/sound/pci/cs5535audio/cs5535audio_olpc.c b/sound/pci/cs5535audio/cs5535audio_olpc.c
new file mode 100644
index 0000000..4b72d86
--- /dev/null
+++ b/sound/pci/cs5535audio/cs5535audio_olpc.c
@@ -0,0 +1,113 @@
+#include <linux/olpc.h>
+#include <sound/driver.h>
+#include <sound/core.h>
+#include <sound/info.h>
+#include <sound/control.h>
+#include <sound/ac97_codec.h>
+#include "cs5535audio.h"
+
+/* OLPC has an additional feature on top of regular AD1888 codec
+features. This is support for an analog input mode. This is a
+2 step process. First, to turn off the AD1888 codec bias voltage
+and high pass filter. Second, to tell the embedded controller to
+reroute from a capacitive trace to a direct trace using an analog
+switch. The *_ec()s are what talk to that controller */
+
+static int snd_cs5535audio_ctl_info(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
+ uinfo->count = 1;
+ uinfo->value.integer.min = 0;
+ uinfo->value.integer.max = 1;
+ return 0;
+}
+
+#define AD1888_VREFOUT_EN_BIT (1 << 2)
+#define AD1888_HPF_EN_BIT (1 << 12)
+static int snd_cs5535audio_ctl_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct cs5535audio *cs5535au = snd_kcontrol_chip(kcontrol);
+ u16 reg1, reg2;
+
+ /* if either AD1888 VRef Bias and High Pass Filter are enabled
+ or the EC is not in analog mode then flag as not in analog mode.
+ No EC command to read current analog state so we cache that. */
+ reg1 = snd_ac97_read(cs5535au->ac97, AC97_AD_MISC);
+ reg2 = snd_ac97_read(cs5535au->ac97, AC97_AD_TEST2);
+
+ if ((reg1 & AD1888_VREFOUT_EN_BIT) && (reg2 & AD1888_HPF_EN_BIT) &&
+ cs5535au->ec_analog_input_mode)
+ ucontrol->value.integer.value[0] = 1;
+ else
+ ucontrol->value.integer.value[0] = 0;
+
+ return 0;
+}
+
+static int snd_cs5535audio_ctl_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ int err;
+ struct cs5535audio *cs5535au = snd_kcontrol_chip(kcontrol);
+ u8 value;
+ struct snd_ac97 *ac97 = cs5535au->ac97;
+
+ /* value is 1 if analog input is desired */
+ value = ucontrol->value.integer.value[0];
+
+ /* use ec mode as flag to determine if any change needed */
+ if (cs5535au->ec_analog_input_mode == value)
+ return 0;
+
+ /* sets High Z on VREF Bias if 1 */
+ if (value)
+ err = snd_ac97_update_bits(ac97, AC97_AD_MISC,
+ AD1888_VREFOUT_EN_BIT, AD1888_VREFOUT_EN_BIT);
+ else
+ err = snd_ac97_update_bits(ac97, AC97_AD_MISC,
+ AD1888_VREFOUT_EN_BIT, 0);
+ if (err < 0)
+ snd_printk(KERN_ERR "Error updating AD_MISC %d\n", err);
+
+ /* turns off High Pass Filter if 1 */
+ if (value)
+ err = snd_ac97_update_bits(ac97, AC97_AD_TEST2,
+ AD1888_HPF_EN_BIT, AD1888_HPF_EN_BIT);
+ else
+ err = snd_ac97_update_bits(ac97, AC97_AD_TEST2,
+ AD1888_HPF_EN_BIT, 0);
+ if (err < 0)
+ snd_printk(KERN_ERR "Error updating AD_TEST2 %d\n", err);
+
+ if (value)
+ err = write_ec_command(0x01); /* activate MIC_AC_OFF */
+ else
+ err = write_ec_command(0x02); /* deactivates MIC_AC_OFF */
+
+ if (err < 0)
+ snd_printk(KERN_ERR "Error talking to EC %d\n", err);
+
+ cs5535au->ec_analog_input_mode = value;
+
+ return 1;
+}
+
+static struct snd_kcontrol_new snd_cs5535audio_controls __devinitdata =
+{
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Analog Input Switch",
+ .info = snd_cs5535audio_ctl_info,
+ .get = snd_cs5535audio_ctl_get,
+ .put = snd_cs5535audio_ctl_put,
+ .private_value = 0
+};
+
+int __devinit olpc_quirks(struct snd_card *card, struct snd_ac97 *ac97)
+{
+ /* setup callback for mixer control that does analog input mode */
+ return snd_ctl_add(card, snd_ctl_new1(&snd_cs5535audio_controls,
+ ac97->private_data));
+}
+