[POWERPC] Revise PPC44x MMU code for arch/powerpc
This patch takes the definitions for the PPC44x MMU (a software loaded
TLB) from asm-ppc/mmu.h, cleans them up of things no longer necessary
in arch/powerpc and puts them in a new asm-powerpc/mmu_44x.h file. It
also substantially simplifies arch/powerpc/mm/44x_mmu.c and makes a
couple of small fixes necessary for the 44x MMU code to build and work
properly in arch/powerpc.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
diff --git a/arch/powerpc/mm/44x_mmu.c b/arch/powerpc/mm/44x_mmu.c
index 0a0a0487b..ca4dcb0 100644
--- a/arch/powerpc/mm/44x_mmu.c
+++ b/arch/powerpc/mm/44x_mmu.c
@@ -24,73 +24,38 @@
*
*/
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/types.h>
-#include <linux/ptrace.h>
-#include <linux/mman.h>
-#include <linux/mm.h>
-#include <linux/swap.h>
-#include <linux/stddef.h>
-#include <linux/vmalloc.h>
#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/highmem.h>
-
-#include <asm/pgalloc.h>
-#include <asm/prom.h>
-#include <asm/io.h>
-#include <asm/mmu_context.h>
-#include <asm/pgtable.h>
#include <asm/mmu.h>
-#include <asm/uaccess.h>
-#include <asm/smp.h>
-#include <asm/bootx.h>
-#include <asm/machdep.h>
-#include <asm/setup.h>
+#include <asm/system.h>
+#include <asm/page.h>
#include "mmu_decl.h"
-extern char etext[], _stext[];
-
/* Used by the 44x TLB replacement exception handler.
* Just needed it declared someplace.
*/
-unsigned int tlb_44x_index = 0;
-unsigned int tlb_44x_hwater = 62;
+unsigned int tlb_44x_index; /* = 0 */
+unsigned int tlb_44x_hwater = PPC44x_TLB_SIZE - 1 - PPC44x_EARLY_TLBS;
/*
* "Pins" a 256MB TLB entry in AS0 for kernel lowmem
*/
-static void __init
-ppc44x_pin_tlb(int slot, unsigned int virt, unsigned int phys)
+static void __init ppc44x_pin_tlb(unsigned int virt, unsigned int phys)
{
- unsigned long attrib = 0;
-
- __asm__ __volatile__("\
- clrrwi %2,%2,10\n\
- ori %2,%2,%4\n\
- clrrwi %1,%1,10\n\
- li %0,0\n\
- ori %0,%0,%5\n\
- tlbwe %2,%3,%6\n\
- tlbwe %1,%3,%7\n\
- tlbwe %0,%3,%8"
+ __asm__ __volatile__(
+ "tlbwe %2,%3,%4\n"
+ "tlbwe %1,%3,%5\n"
+ "tlbwe %0,%3,%6\n"
:
- : "r" (attrib), "r" (phys), "r" (virt), "r" (slot),
- "i" (PPC44x_TLB_VALID | PPC44x_TLB_256M),
- "i" (PPC44x_TLB_SW | PPC44x_TLB_SR | PPC44x_TLB_SX | PPC44x_TLB_G),
+ : "r" (PPC44x_TLB_SW | PPC44x_TLB_SR | PPC44x_TLB_SX | PPC44x_TLB_G),
+ "r" (phys),
+ "r" (virt | PPC44x_TLB_VALID | PPC44x_TLB_256M),
+ "r" (tlb_44x_hwater--), /* slot for this TLB entry */
"i" (PPC44x_TLB_PAGEID),
"i" (PPC44x_TLB_XLAT),
"i" (PPC44x_TLB_ATTRIB));
}
-/*
- * MMU_init_hw does the chip-specific initialization of the MMU hardware.
- */
void __init MMU_init_hw(void)
{
flush_instruction_cache();
@@ -98,22 +63,13 @@
unsigned long __init mmu_mapin_ram(void)
{
- unsigned int pinned_tlbs = 1;
- int i;
+ unsigned long addr;
- /* Determine number of entries necessary to cover lowmem */
- pinned_tlbs = (unsigned int)
- (_ALIGN(total_lowmem, PPC_PIN_SIZE) >> PPC44x_PIN_SHIFT);
-
- /* Write upper watermark to save location */
- tlb_44x_hwater = PPC44x_LOW_SLOT - pinned_tlbs;
-
- /* If necessary, set additional pinned TLBs */
- if (pinned_tlbs > 1)
- for (i = (PPC44x_LOW_SLOT-(pinned_tlbs-1)); i < PPC44x_LOW_SLOT; i++) {
- unsigned int phys_addr = (PPC44x_LOW_SLOT-i) * PPC_PIN_SIZE;
- ppc44x_pin_tlb(i, phys_addr+PAGE_OFFSET, phys_addr);
- }
+ /* Pin in enough TLBs to cover any lowmem not covered by the
+ * initial 256M mapping established in head_44x.S */
+ for (addr = PPC_PIN_SIZE; addr < total_lowmem;
+ addr += PPC_PIN_SIZE)
+ ppc44x_pin_tlb(addr + PAGE_OFFSET, addr);
return total_lowmem;
}