[ARM] 4325/1: S3C24XX: remove s3c24xx_board
Remove the use of struct s3c24xx_board as
this is just as easily done by using the
platform device registration functions to
make the initialisation sequence easier.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c
index c987221..324f5a2 100644
--- a/arch/arm/mach-s3c2440/mach-osiris.c
+++ b/arch/arm/mach-s3c2440/mach-osiris.c
@@ -251,11 +251,6 @@
&s3c24xx_uclk,
};
-static struct s3c24xx_board osiris_board __initdata = {
- .devices = osiris_devices,
- .devices_count = ARRAY_SIZE(osiris_devices),
-};
-
static void __init osiris_map_io(void)
{
unsigned long flags;
@@ -280,7 +275,6 @@
s3c24xx_init_io(osiris_iodesc, ARRAY_SIZE(osiris_iodesc));
s3c24xx_init_clocks(0);
s3c24xx_init_uarts(osiris_uartcfgs, ARRAY_SIZE(osiris_uartcfgs));
- s3c24xx_set_board(&osiris_board);
/* fix bus configuration (nBE settings wrong on ABLE pre v2.20) */
@@ -292,12 +286,18 @@
s3c2410_gpio_setpin(S3C2410_GPA0, 1);
}
+static void __init osiris_init(void)
+{
+ platform_add_devices(osiris_devices, ARRAY_SIZE(osiris_devices));
+};
+
MACHINE_START(OSIRIS, "Simtec-OSIRIS")
/* Maintainer: Ben Dooks <ben@simtec.co.uk> */
.phys_io = S3C2410_PA_UART,
.io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
.boot_params = S3C2410_SDRAM_PA + 0x100,
.map_io = osiris_map_io,
+ .init_machine = osiris_init,
.init_irq = s3c24xx_init_irq,
.timer = &s3c24xx_timer,
MACHINE_END