| /* |
| * da9211-regulator.c - Regulator device driver for DA9211/DA9213 |
| * Copyright (C) 2014 Dialog Semiconductor Ltd. |
| * |
| * This library is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU Library General Public |
| * License as published by the Free Software Foundation; either |
| * version 2 of the License, or (at your option) any later version. |
| * |
| * This library is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * Library General Public License for more details. |
| */ |
| |
| #include <linux/err.h> |
| #include <linux/gpio.h> |
| #include <linux/i2c.h> |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/slab.h> |
| #include <linux/regulator/driver.h> |
| #include <linux/regulator/machine.h> |
| #include <linux/regmap.h> |
| #include <linux/irq.h> |
| #include <linux/interrupt.h> |
| #include <linux/of_gpio.h> |
| #include <linux/regulator/of_regulator.h> |
| #include <linux/regulator/da9211.h> |
| #include "da9211-regulator.h" |
| |
| /* DEVICE IDs */ |
| #define DA9211_DEVICE_ID 0x22 |
| #define DA9213_DEVICE_ID 0x23 |
| |
| #define DA9211_BUCK_MODE_SLEEP 1 |
| #define DA9211_BUCK_MODE_SYNC 2 |
| #define DA9211_BUCK_MODE_AUTO 3 |
| |
| /* DA9211 REGULATOR IDs */ |
| #define DA9211_ID_BUCKA 0 |
| #define DA9211_ID_BUCKB 1 |
| |
| struct da9211 { |
| struct device *dev; |
| struct regmap *regmap; |
| struct da9211_pdata *pdata; |
| struct regulator_dev *rdev[DA9211_MAX_REGULATORS]; |
| int num_regulator; |
| int chip_irq; |
| int chip_id; |
| }; |
| |
| static const struct regmap_range_cfg da9211_regmap_range[] = { |
| { |
| .selector_reg = DA9211_REG_PAGE_CON, |
| .selector_mask = DA9211_REG_PAGE_MASK, |
| .selector_shift = DA9211_REG_PAGE_SHIFT, |
| .window_start = 0, |
| .window_len = 256, |
| .range_min = 0, |
| .range_max = 5*128, |
| }, |
| }; |
| |
| static const struct regmap_config da9211_regmap_config = { |
| .reg_bits = 8, |
| .val_bits = 8, |
| .max_register = 5 * 128, |
| .ranges = da9211_regmap_range, |
| .num_ranges = ARRAY_SIZE(da9211_regmap_range), |
| }; |
| |
| /* Default limits measured in millivolts and milliamps */ |
| #define DA9211_MIN_MV 300 |
| #define DA9211_MAX_MV 1570 |
| #define DA9211_STEP_MV 10 |
| |
| /* Current limits for DA9211 buck (uA) indices |
| * corresponds with register values |
| */ |
| static const int da9211_current_limits[] = { |
| 2000000, 2200000, 2400000, 2600000, 2800000, 3000000, 3200000, 3400000, |
| 3600000, 3800000, 4000000, 4200000, 4400000, 4600000, 4800000, 5000000 |
| }; |
| /* Current limits for DA9213 buck (uA) indices |
| * corresponds with register values |
| */ |
| static const int da9213_current_limits[] = { |
| 3000000, 3200000, 3400000, 3600000, 3800000, 4000000, 4200000, 4400000, |
| 4600000, 4800000, 5000000, 5200000, 5400000, 5600000, 5800000, 6000000 |
| }; |
| |
| static unsigned int da9211_buck_get_mode(struct regulator_dev *rdev) |
| { |
| int id = rdev_get_id(rdev); |
| struct da9211 *chip = rdev_get_drvdata(rdev); |
| unsigned int data; |
| int ret, mode = 0; |
| |
| ret = regmap_read(chip->regmap, DA9211_REG_BUCKA_CONF+id, &data); |
| if (ret < 0) |
| return ret; |
| |
| switch (data & 0x03) { |
| case DA9211_BUCK_MODE_SYNC: |
| mode = REGULATOR_MODE_FAST; |
| break; |
| case DA9211_BUCK_MODE_AUTO: |
| mode = REGULATOR_MODE_NORMAL; |
| break; |
| case DA9211_BUCK_MODE_SLEEP: |
| mode = REGULATOR_MODE_STANDBY; |
| break; |
| } |
| |
| return mode; |
| } |
| |
| static int da9211_buck_set_mode(struct regulator_dev *rdev, |
| unsigned int mode) |
| { |
| int id = rdev_get_id(rdev); |
| struct da9211 *chip = rdev_get_drvdata(rdev); |
| int val = 0; |
| |
| switch (mode) { |
| case REGULATOR_MODE_FAST: |
| val = DA9211_BUCK_MODE_SYNC; |
| break; |
| case REGULATOR_MODE_NORMAL: |
| val = DA9211_BUCK_MODE_AUTO; |
| break; |
| case REGULATOR_MODE_STANDBY: |
| val = DA9211_BUCK_MODE_SLEEP; |
| break; |
| } |
| |
| return regmap_update_bits(chip->regmap, DA9211_REG_BUCKA_CONF+id, |
| 0x03, val); |
| } |
| |
| static int da9211_set_current_limit(struct regulator_dev *rdev, int min, |
| int max) |
| { |
| int id = rdev_get_id(rdev); |
| struct da9211 *chip = rdev_get_drvdata(rdev); |
| int i, max_size; |
| const int *current_limits; |
| |
| switch (chip->chip_id) { |
| case DA9211: |
| current_limits = da9211_current_limits; |
| max_size = ARRAY_SIZE(da9211_current_limits)-1; |
| break; |
| case DA9213: |
| current_limits = da9213_current_limits; |
| max_size = ARRAY_SIZE(da9213_current_limits)-1; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| /* search for closest to maximum */ |
| for (i = max_size; i >= 0; i--) { |
| if (min <= current_limits[i] && |
| max >= current_limits[i]) { |
| return regmap_update_bits(chip->regmap, |
| DA9211_REG_BUCK_ILIM, |
| (0x0F << id*4), (i << id*4)); |
| } |
| } |
| |
| return -EINVAL; |
| } |
| |
| static int da9211_get_current_limit(struct regulator_dev *rdev) |
| { |
| int id = rdev_get_id(rdev); |
| struct da9211 *chip = rdev_get_drvdata(rdev); |
| unsigned int data; |
| int ret; |
| const int *current_limits; |
| |
| switch (chip->chip_id) { |
| case DA9211: |
| current_limits = da9211_current_limits; |
| break; |
| case DA9213: |
| current_limits = da9213_current_limits; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| ret = regmap_read(chip->regmap, DA9211_REG_BUCK_ILIM, &data); |
| if (ret < 0) |
| return ret; |
| |
| /* select one of 16 values: 0000 (2000mA or 3000mA) |
| * to 1111 (5000mA or 6000mA). |
| */ |
| data = (data >> id*4) & 0x0F; |
| return current_limits[data]; |
| } |
| |
| static struct regulator_ops da9211_buck_ops = { |
| .get_mode = da9211_buck_get_mode, |
| .set_mode = da9211_buck_set_mode, |
| .enable = regulator_enable_regmap, |
| .disable = regulator_disable_regmap, |
| .is_enabled = regulator_is_enabled_regmap, |
| .set_voltage_sel = regulator_set_voltage_sel_regmap, |
| .get_voltage_sel = regulator_get_voltage_sel_regmap, |
| .list_voltage = regulator_list_voltage_linear, |
| .set_current_limit = da9211_set_current_limit, |
| .get_current_limit = da9211_get_current_limit, |
| }; |
| |
| #define DA9211_BUCK(_id) \ |
| {\ |
| .name = #_id,\ |
| .ops = &da9211_buck_ops,\ |
| .type = REGULATOR_VOLTAGE,\ |
| .id = DA9211_ID_##_id,\ |
| .n_voltages = (DA9211_MAX_MV - DA9211_MIN_MV) / DA9211_STEP_MV + 1,\ |
| .min_uV = (DA9211_MIN_MV * 1000),\ |
| .uV_step = (DA9211_STEP_MV * 1000),\ |
| .enable_reg = DA9211_REG_BUCKA_CONT + DA9211_ID_##_id,\ |
| .enable_mask = DA9211_BUCKA_EN,\ |
| .vsel_reg = DA9211_REG_VBUCKA_A + DA9211_ID_##_id * 2,\ |
| .vsel_mask = DA9211_VBUCK_MASK,\ |
| .owner = THIS_MODULE,\ |
| } |
| |
| static struct regulator_desc da9211_regulators[] = { |
| DA9211_BUCK(BUCKA), |
| DA9211_BUCK(BUCKB), |
| }; |
| |
| #ifdef CONFIG_OF |
| static struct of_regulator_match da9211_matches[] = { |
| [DA9211_ID_BUCKA] = { .name = "BUCKA" }, |
| [DA9211_ID_BUCKB] = { .name = "BUCKB" }, |
| }; |
| |
| static struct da9211_pdata *da9211_parse_regulators_dt( |
| struct device *dev) |
| { |
| struct da9211_pdata *pdata; |
| struct device_node *node; |
| int i, num, n; |
| |
| node = of_get_child_by_name(dev->of_node, "regulators"); |
| if (!node) { |
| dev_err(dev, "regulators node not found\n"); |
| return ERR_PTR(-ENODEV); |
| } |
| |
| num = of_regulator_match(dev, node, da9211_matches, |
| ARRAY_SIZE(da9211_matches)); |
| of_node_put(node); |
| if (num < 0) { |
| dev_err(dev, "Failed to match regulators\n"); |
| return ERR_PTR(-EINVAL); |
| } |
| |
| pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); |
| if (!pdata) |
| return ERR_PTR(-ENOMEM); |
| |
| pdata->num_buck = num; |
| |
| n = 0; |
| for (i = 0; i < ARRAY_SIZE(da9211_matches); i++) { |
| if (!da9211_matches[i].init_data) |
| continue; |
| |
| pdata->init_data[n] = da9211_matches[i].init_data; |
| pdata->reg_node[n] = da9211_matches[i].of_node; |
| pdata->gpio_ren[n] = |
| of_get_named_gpio(da9211_matches[i].of_node, |
| "enable-gpios", 0); |
| n++; |
| } |
| |
| return pdata; |
| } |
| #else |
| static struct da9211_pdata *da9211_parse_regulators_dt( |
| struct device *dev) |
| { |
| return ERR_PTR(-ENODEV); |
| } |
| #endif |
| |
| static irqreturn_t da9211_irq_handler(int irq, void *data) |
| { |
| struct da9211 *chip = data; |
| int reg_val, err, ret = IRQ_NONE; |
| |
| err = regmap_read(chip->regmap, DA9211_REG_EVENT_B, ®_val); |
| if (err < 0) |
| goto error_i2c; |
| |
| if (reg_val & DA9211_E_OV_CURR_A) { |
| regulator_notifier_call_chain(chip->rdev[0], |
| REGULATOR_EVENT_OVER_CURRENT, NULL); |
| |
| err = regmap_write(chip->regmap, DA9211_REG_EVENT_B, |
| DA9211_E_OV_CURR_A); |
| if (err < 0) |
| goto error_i2c; |
| |
| ret = IRQ_HANDLED; |
| } |
| |
| if (reg_val & DA9211_E_OV_CURR_B) { |
| regulator_notifier_call_chain(chip->rdev[1], |
| REGULATOR_EVENT_OVER_CURRENT, NULL); |
| |
| err = regmap_write(chip->regmap, DA9211_REG_EVENT_B, |
| DA9211_E_OV_CURR_B); |
| if (err < 0) |
| goto error_i2c; |
| |
| ret = IRQ_HANDLED; |
| } |
| |
| return ret; |
| |
| error_i2c: |
| dev_err(chip->dev, "I2C error : %d\n", err); |
| return IRQ_NONE; |
| } |
| |
| static int da9211_regulator_init(struct da9211 *chip) |
| { |
| struct regulator_config config = { }; |
| int i, ret; |
| unsigned int data; |
| |
| ret = regmap_read(chip->regmap, DA9211_REG_CONFIG_E, &data); |
| if (ret < 0) { |
| dev_err(chip->dev, "Failed to read CONFIG_E reg: %d\n", ret); |
| return ret; |
| } |
| |
| data &= DA9211_SLAVE_SEL; |
| /* If configuration for 1/2 bucks is different between platform data |
| * and the register, driver should exit. |
| */ |
| if ((chip->pdata->num_buck == 2 && data == 0x40) |
| || (chip->pdata->num_buck == 1 && data == 0x00)) { |
| if (data == 0) |
| chip->num_regulator = 1; |
| else |
| chip->num_regulator = 2; |
| } else { |
| dev_err(chip->dev, "Configuration is mismatched\n"); |
| return -EINVAL; |
| } |
| |
| for (i = 0; i < chip->num_regulator; i++) { |
| config.init_data = chip->pdata->init_data[i]; |
| config.dev = chip->dev; |
| config.driver_data = chip; |
| config.regmap = chip->regmap; |
| config.of_node = chip->pdata->reg_node[i]; |
| |
| if (gpio_is_valid(chip->pdata->gpio_ren[i])) { |
| config.ena_gpio = chip->pdata->gpio_ren[i]; |
| config.ena_gpio_initialized = true; |
| } else { |
| config.ena_gpio = -EINVAL; |
| config.ena_gpio_initialized = false; |
| } |
| |
| chip->rdev[i] = devm_regulator_register(chip->dev, |
| &da9211_regulators[i], &config); |
| if (IS_ERR(chip->rdev[i])) { |
| dev_err(chip->dev, |
| "Failed to register DA9211 regulator\n"); |
| return PTR_ERR(chip->rdev[i]); |
| } |
| |
| if (chip->chip_irq != 0) { |
| ret = regmap_update_bits(chip->regmap, |
| DA9211_REG_MASK_B, DA9211_M_OV_CURR_A << i, 0); |
| if (ret < 0) { |
| dev_err(chip->dev, |
| "Failed to update mask reg: %d\n", ret); |
| return ret; |
| } |
| } |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * I2C driver interface functions |
| */ |
| static int da9211_i2c_probe(struct i2c_client *i2c, |
| const struct i2c_device_id *id) |
| { |
| struct da9211 *chip; |
| int error, ret; |
| unsigned int data; |
| |
| chip = devm_kzalloc(&i2c->dev, sizeof(struct da9211), GFP_KERNEL); |
| if (!chip) |
| return -ENOMEM; |
| |
| chip->dev = &i2c->dev; |
| chip->regmap = devm_regmap_init_i2c(i2c, &da9211_regmap_config); |
| if (IS_ERR(chip->regmap)) { |
| error = PTR_ERR(chip->regmap); |
| dev_err(chip->dev, "Failed to allocate register map: %d\n", |
| error); |
| return error; |
| } |
| |
| i2c_set_clientdata(i2c, chip); |
| |
| chip->pdata = i2c->dev.platform_data; |
| |
| ret = regmap_read(chip->regmap, DA9211_REG_DEVICE_ID, &data); |
| if (ret < 0) { |
| dev_err(chip->dev, "Failed to read DEVICE_ID reg: %d\n", ret); |
| return ret; |
| } |
| |
| switch (data) { |
| case DA9211_DEVICE_ID: |
| chip->chip_id = DA9211; |
| break; |
| case DA9213_DEVICE_ID: |
| chip->chip_id = DA9213; |
| break; |
| default: |
| dev_err(chip->dev, "Unsupported device id = 0x%x.\n", data); |
| return -ENODEV; |
| } |
| |
| if (!chip->pdata) |
| chip->pdata = da9211_parse_regulators_dt(chip->dev); |
| |
| if (IS_ERR(chip->pdata)) { |
| dev_err(chip->dev, "No regulators defined for the platform\n"); |
| return PTR_ERR(chip->pdata); |
| } |
| |
| chip->chip_irq = i2c->irq; |
| |
| if (chip->chip_irq != 0) { |
| ret = devm_request_threaded_irq(chip->dev, chip->chip_irq, NULL, |
| da9211_irq_handler, |
| IRQF_TRIGGER_LOW|IRQF_ONESHOT, |
| "da9211", chip); |
| if (ret != 0) { |
| dev_err(chip->dev, "Failed to request IRQ: %d\n", |
| chip->chip_irq); |
| return ret; |
| } |
| } else { |
| dev_warn(chip->dev, "No IRQ configured\n"); |
| } |
| |
| ret = da9211_regulator_init(chip); |
| |
| if (ret < 0) |
| dev_err(chip->dev, "Failed to initialize regulator: %d\n", ret); |
| |
| return ret; |
| } |
| |
| static const struct i2c_device_id da9211_i2c_id[] = { |
| {"da9211", DA9211}, |
| {"da9213", DA9213}, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(i2c, da9211_i2c_id); |
| |
| #ifdef CONFIG_OF |
| static const struct of_device_id da9211_dt_ids[] = { |
| { .compatible = "dlg,da9211", .data = &da9211_i2c_id[0] }, |
| { .compatible = "dlg,da9213", .data = &da9211_i2c_id[1] }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, da9211_dt_ids); |
| #endif |
| |
| static struct i2c_driver da9211_regulator_driver = { |
| .driver = { |
| .name = "da9211", |
| .owner = THIS_MODULE, |
| .of_match_table = of_match_ptr(da9211_dt_ids), |
| }, |
| .probe = da9211_i2c_probe, |
| .id_table = da9211_i2c_id, |
| }; |
| |
| module_i2c_driver(da9211_regulator_driver); |
| |
| MODULE_AUTHOR("James Ban <James.Ban.opensource@diasemi.com>"); |
| MODULE_DESCRIPTION("Regulator device driver for Dialog DA9211/DA9213"); |
| MODULE_LICENSE("GPL v2"); |