| /* |
| * Copyright (c) 2010 Broadcom Corporation |
| * |
| * Permission to use, copy, modify, and/or distribute this software for any |
| * purpose with or without fee is hereby granted, provided that the above |
| * copyright notice and this permission notice appear in all copies. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES |
| * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF |
| * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY |
| * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES |
| * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION |
| * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN |
| * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. |
| */ |
| |
| #include <wlc_cfg.h> |
| #include <typedefs.h> |
| #include <linux/kernel.h> |
| #include <linuxver.h> |
| #include <bcmdefs.h> |
| #include <osl.h> |
| #include <linux/ctype.h> |
| #include <bcmutils.h> |
| #include <bcmwifi.h> |
| #include <siutils.h> |
| #include <bcmendian.h> |
| #include <proto/wpa.h> |
| #include <pcicfg.h> |
| #include <bcmsrom.h> |
| #include <wlioctl.h> |
| #include <epivers.h> |
| #include <bcmwpa.h> |
| #include <sbhnddma.h> |
| #include <hnddma.h> |
| #include <hndpmu.h> |
| #include <d11.h> |
| #include <wlc_rate.h> |
| #include <wlc_pub.h> |
| #include <wlc_key.h> |
| #include <wlc_bsscfg.h> |
| #include <wlc_channel.h> |
| #include <wlc_mac80211.h> |
| #include <wlc_bmac.h> |
| #include <wlc_scb.h> |
| #include <wlc_phy_hal.h> |
| #include <wlc_phy_shim.h> |
| #include <wlc_antsel.h> |
| #include <wlc_stf.h> |
| #include <wlc_ampdu.h> |
| #include <wlc_event.h> |
| #include <wl_export.h> |
| #ifdef BCMSDIO |
| #include <bcmsdh.h> |
| #else |
| #include "d11ucode_ext.h" |
| #endif |
| #ifdef WLC_HIGH_ONLY |
| #include <bcm_rpc_tp.h> |
| #include <bcm_rpc.h> |
| #include <bcm_xdr.h> |
| #include <wlc_rpc.h> |
| #include <wlc_rpctx.h> |
| #endif /* WLC_HIGH_ONLY */ |
| #include <wlc_alloc.h> |
| #include <net/mac80211.h> |
| |
| #ifdef WLC_HIGH_ONLY |
| #undef R_REG |
| #undef W_REG |
| #define R_REG(osh, r) RPC_READ_REG(osh, r) |
| #define W_REG(osh, r, v) RPC_WRITE_REG(osh, r, v) |
| #endif |
| |
| /* |
| * buffer length needed for wlc_format_ssid |
| * 32 SSID chars, max of 4 chars for each SSID char "\xFF", plus NULL. |
| */ |
| #define SSID_FMT_BUF_LEN ((4 * DOT11_MAX_SSID_LEN) + 1) |
| |
| #define TIMER_INTERVAL_WATCHDOG 1000 /* watchdog timer, in unit of ms */ |
| #define TIMER_INTERVAL_RADIOCHK 800 /* radio monitor timer, in unit of ms */ |
| |
| #ifndef WLC_MPC_MAX_DELAYCNT |
| #define WLC_MPC_MAX_DELAYCNT 10 /* Max MPC timeout, in unit of watchdog */ |
| #endif |
| #define WLC_MPC_MIN_DELAYCNT 1 /* Min MPC timeout, in unit of watchdog */ |
| #define WLC_MPC_THRESHOLD 3 /* MPC count threshold level */ |
| |
| #define BEACON_INTERVAL_DEFAULT 100 /* beacon interval, in unit of 1024TU */ |
| #define DTIM_INTERVAL_DEFAULT 3 /* DTIM interval, in unit of beacon interval */ |
| |
| /* Scale down delays to accommodate QT slow speed */ |
| #define BEACON_INTERVAL_DEF_QT 20 /* beacon interval, in unit of 1024TU */ |
| #define DTIM_INTERVAL_DEF_QT 1 /* DTIM interval, in unit of beacon interval */ |
| |
| #define TBTT_ALIGN_LEEWAY_US 100 /* min leeway before first TBTT in us */ |
| |
| /* |
| * driver maintains internal 'tick'(wlc->pub->now) which increments in 1s OS timer(soft |
| * watchdog) it is not a wall clock and won't increment when driver is in "down" state |
| * this low resolution driver tick can be used for maintenance tasks such as phy |
| * calibration and scb update |
| */ |
| |
| /* watchdog trigger mode: OSL timer or TBTT */ |
| #define WLC_WATCHDOG_TBTT(wlc) \ |
| (wlc->stas_associated > 0 && wlc->PM != PM_OFF && wlc->pub->align_wd_tbtt) |
| |
| /* To inform the ucode of the last mcast frame posted so that it can clear moredata bit */ |
| #define BCMCFID(wlc, fid) wlc_bmac_write_shm((wlc)->hw, M_BCMC_FID, (fid)) |
| |
| #ifndef WLC_HIGH_ONLY |
| #define WLC_WAR16165(wlc) (BUSTYPE(wlc->pub->sih->bustype) == PCI_BUS && \ |
| (!AP_ENAB(wlc->pub)) && (wlc->war16165)) |
| #else |
| #define WLC_WAR16165(wlc) (FALSE) |
| #endif /* WLC_HIGH_ONLY */ |
| |
| /* debug/trace */ |
| uint wl_msg_level = |
| #if defined(BCMDBG) |
| WL_ERROR_VAL; |
| #else |
| 0; |
| #endif /* BCMDBG */ |
| |
| /* Find basic rate for a given rate */ |
| #define WLC_BASIC_RATE(wlc, rspec) (IS_MCS(rspec) ? \ |
| (wlc)->band->basic_rate[mcs_table[rspec & RSPEC_RATE_MASK].leg_ofdm] : \ |
| (wlc)->band->basic_rate[rspec & RSPEC_RATE_MASK]) |
| |
| #define FRAMETYPE(r, mimoframe) (IS_MCS(r) ? mimoframe : (IS_CCK(r) ? FT_CCK : FT_OFDM)) |
| |
| #define RFDISABLE_DEFAULT 10000000 /* rfdisable delay timer 500 ms, runs of ALP clock */ |
| |
| #define WLC_TEMPSENSE_PERIOD 10 /* 10 second timeout */ |
| |
| #define SCAN_IN_PROGRESS(x) 0 |
| |
| #ifdef BCMDBG |
| /* pointer to most recently allocated wl/wlc */ |
| static wlc_info_t *wlc_info_dbg = (wlc_info_t *) (NULL); |
| #endif |
| |
| #if defined(BCMDBG) |
| struct wlc_id_name_entry { |
| int id; |
| const char *name; |
| }; |
| typedef struct wlc_id_name_entry wlc_id_name_table_t[]; |
| #endif |
| |
| /* IOVar table */ |
| |
| /* Parameter IDs, for use only internally to wlc -- in the wlc_iovars |
| * table and by the wlc_doiovar() function. No ordering is imposed: |
| * the table is keyed by name, and the function uses a switch. |
| */ |
| enum { |
| IOV_MPC = 1, |
| IOV_QTXPOWER, |
| IOV_BCN_LI_BCN, /* Beacon listen interval in # of beacons */ |
| IOV_LAST /* In case of a need to check max ID number */ |
| }; |
| |
| const bcm_iovar_t wlc_iovars[] = { |
| {"mpc", IOV_MPC, (IOVF_OPEN_ALLOW), IOVT_BOOL, 0}, |
| {"qtxpower", IOV_QTXPOWER, (IOVF_WHL | IOVF_OPEN_ALLOW), IOVT_UINT32, |
| 0}, |
| {"bcn_li_bcn", IOV_BCN_LI_BCN, 0, IOVT_UINT8, 0}, |
| {NULL, 0, 0, 0, 0} |
| }; |
| |
| const u8 prio2fifo[NUMPRIO] = { |
| TX_AC_BE_FIFO, /* 0 BE AC_BE Best Effort */ |
| TX_AC_BK_FIFO, /* 1 BK AC_BK Background */ |
| TX_AC_BK_FIFO, /* 2 -- AC_BK Background */ |
| TX_AC_BE_FIFO, /* 3 EE AC_BE Best Effort */ |
| TX_AC_VI_FIFO, /* 4 CL AC_VI Video */ |
| TX_AC_VI_FIFO, /* 5 VI AC_VI Video */ |
| TX_AC_VO_FIFO, /* 6 VO AC_VO Voice */ |
| TX_AC_VO_FIFO /* 7 NC AC_VO Voice */ |
| }; |
| |
| /* precedences numbers for wlc queues. These are twice as may levels as |
| * 802.1D priorities. |
| * Odd numbers are used for HI priority traffic at same precedence levels |
| * These constants are used ONLY by wlc_prio2prec_map. Do not use them elsewhere. |
| */ |
| #define _WLC_PREC_NONE 0 /* None = - */ |
| #define _WLC_PREC_BK 2 /* BK - Background */ |
| #define _WLC_PREC_BE 4 /* BE - Best-effort */ |
| #define _WLC_PREC_EE 6 /* EE - Excellent-effort */ |
| #define _WLC_PREC_CL 8 /* CL - Controlled Load */ |
| #define _WLC_PREC_VI 10 /* Vi - Video */ |
| #define _WLC_PREC_VO 12 /* Vo - Voice */ |
| #define _WLC_PREC_NC 14 /* NC - Network Control */ |
| |
| /* 802.1D Priority to precedence queue mapping */ |
| const u8 wlc_prio2prec_map[] = { |
| _WLC_PREC_BE, /* 0 BE - Best-effort */ |
| _WLC_PREC_BK, /* 1 BK - Background */ |
| _WLC_PREC_NONE, /* 2 None = - */ |
| _WLC_PREC_EE, /* 3 EE - Excellent-effort */ |
| _WLC_PREC_CL, /* 4 CL - Controlled Load */ |
| _WLC_PREC_VI, /* 5 Vi - Video */ |
| _WLC_PREC_VO, /* 6 Vo - Voice */ |
| _WLC_PREC_NC, /* 7 NC - Network Control */ |
| }; |
| |
| /* Sanity check for tx_prec_map and fifo synchup |
| * Either there are some packets pending for the fifo, else if fifo is empty then |
| * all the corresponding precmap bits should be set |
| */ |
| #define WLC_TX_FIFO_CHECK(wlc, fifo) (TXPKTPENDGET((wlc), (fifo)) || \ |
| (TXPKTPENDGET((wlc), (fifo)) == 0 && \ |
| ((wlc)->tx_prec_map & (wlc)->fifo2prec_map[(fifo)]) == \ |
| (wlc)->fifo2prec_map[(fifo)])) |
| |
| /* TX FIFO number to WME/802.1E Access Category */ |
| const u8 wme_fifo2ac[] = { AC_BK, AC_BE, AC_VI, AC_VO, AC_BE, AC_BE }; |
| |
| /* WME/802.1E Access Category to TX FIFO number */ |
| static const u8 wme_ac2fifo[] = { 1, 0, 2, 3 }; |
| |
| static bool in_send_q = FALSE; |
| |
| /* Shared memory location index for various AC params */ |
| #define wme_shmemacindex(ac) wme_ac2fifo[ac] |
| |
| #ifdef BCMDBG |
| static const char *fifo_names[] = { |
| "AC_BK", "AC_BE", "AC_VI", "AC_VO", "BCMC", "ATIM" }; |
| const char *aci_names[] = { "AC_BE", "AC_BK", "AC_VI", "AC_VO" }; |
| #endif |
| |
| static const u8 acbitmap2maxprio[] = { |
| PRIO_8021D_BE, PRIO_8021D_BE, PRIO_8021D_BK, PRIO_8021D_BK, |
| PRIO_8021D_VI, PRIO_8021D_VI, PRIO_8021D_VI, PRIO_8021D_VI, |
| PRIO_8021D_VO, PRIO_8021D_VO, PRIO_8021D_VO, PRIO_8021D_VO, |
| PRIO_8021D_VO, PRIO_8021D_VO, PRIO_8021D_VO, PRIO_8021D_VO |
| }; |
| |
| /* currently the best mechanism for determining SIFS is the band in use */ |
| #define SIFS(band) ((band)->bandtype == WLC_BAND_5G ? APHY_SIFS_TIME : BPHY_SIFS_TIME); |
| |
| /* value for # replay counters currently supported */ |
| #define WLC_REPLAY_CNTRS_VALUE WPA_CAP_16_REPLAY_CNTRS |
| |
| /* local prototypes */ |
| extern void wlc_txq_enq(void *ctx, struct scb *scb, void *sdu, uint prec); |
| static uint16 BCMFASTPATH wlc_d11hdrs_mac80211(wlc_info_t *wlc, |
| struct ieee80211_hw *hw, void *p, |
| struct scb *scb, uint frag, |
| uint nfrags, uint queue, |
| uint next_frag_len, |
| wsec_key_t *key, |
| ratespec_t rspec_override); |
| bool wlc_sendpkt_mac80211(wlc_info_t *wlc, void *sdu, struct ieee80211_hw *hw); |
| void wlc_wme_setparams(wlc_info_t *wlc, u16 aci, void *arg, bool suspend); |
| static void wlc_bss_default_init(wlc_info_t *wlc); |
| static void wlc_ucode_mac_upd(wlc_info_t *wlc); |
| static ratespec_t mac80211_wlc_set_nrate(wlc_info_t *wlc, wlcband_t *cur_band, |
| uint32 int_val); |
| static void wlc_tx_prec_map_init(wlc_info_t *wlc); |
| static void wlc_watchdog(void *arg); |
| static void wlc_watchdog_by_timer(void *arg); |
| static int wlc_set_rateset(wlc_info_t *wlc, wlc_rateset_t *rs_arg); |
| static int wlc_iovar_rangecheck(wlc_info_t *wlc, uint32 val, |
| const bcm_iovar_t *vi); |
| static u8 wlc_local_constraint_qdbm(wlc_info_t *wlc); |
| |
| /* send and receive */ |
| static wlc_txq_info_t *wlc_txq_alloc(wlc_info_t *wlc, osl_t *osh); |
| static void wlc_txq_free(wlc_info_t *wlc, osl_t *osh, wlc_txq_info_t *qi); |
| static void wlc_txflowcontrol_signal(wlc_info_t *wlc, wlc_txq_info_t *qi, |
| bool on, int prio); |
| static void wlc_txflowcontrol_reset(wlc_info_t *wlc); |
| static uint16 wlc_compute_airtime(wlc_info_t *wlc, ratespec_t rspec, |
| uint length); |
| static void wlc_compute_cck_plcp(ratespec_t rate, uint length, u8 *plcp); |
| static void wlc_compute_ofdm_plcp(ratespec_t rate, uint length, u8 *plcp); |
| static void wlc_compute_mimo_plcp(ratespec_t rate, uint length, u8 *plcp); |
| static uint16 wlc_compute_frame_dur(wlc_info_t *wlc, ratespec_t rate, |
| u8 preamble_type, uint next_frag_len); |
| static void wlc_recvctl(wlc_info_t *wlc, osl_t *osh, d11rxhdr_t *rxh, |
| void *p); |
| static uint wlc_calc_frame_len(wlc_info_t *wlc, ratespec_t rate, |
| u8 preamble_type, uint dur); |
| static uint wlc_calc_ack_time(wlc_info_t *wlc, ratespec_t rate, |
| u8 preamble_type); |
| static uint wlc_calc_cts_time(wlc_info_t *wlc, ratespec_t rate, |
| u8 preamble_type); |
| /* interrupt, up/down, band */ |
| static void wlc_setband(wlc_info_t *wlc, uint bandunit); |
| static chanspec_t wlc_init_chanspec(wlc_info_t *wlc); |
| static void wlc_bandinit_ordered(wlc_info_t *wlc, chanspec_t chanspec); |
| static void wlc_bsinit(wlc_info_t *wlc); |
| static int wlc_duty_cycle_set(wlc_info_t *wlc, int duty_cycle, bool isOFDM, |
| bool writeToShm); |
| static void wlc_radio_hwdisable_upd(wlc_info_t *wlc); |
| static bool wlc_radio_monitor_start(wlc_info_t *wlc); |
| static void wlc_radio_timer(void *arg); |
| static void wlc_radio_enable(wlc_info_t *wlc); |
| static void wlc_radio_upd(wlc_info_t *wlc); |
| |
| /* scan, association, BSS */ |
| static uint wlc_calc_ba_time(wlc_info_t *wlc, ratespec_t rate, |
| u8 preamble_type); |
| static void wlc_update_mimo_band_bwcap(wlc_info_t *wlc, u8 bwcap); |
| static void wlc_ht_update_sgi_rx(wlc_info_t *wlc, int val); |
| void wlc_ht_mimops_cap_update(wlc_info_t *wlc, u8 mimops_mode); |
| static void wlc_ht_update_ldpc(wlc_info_t *wlc, s8 val); |
| static void wlc_war16165(wlc_info_t *wlc, bool tx); |
| |
| static void wlc_process_eventq(void *arg); |
| static void wlc_wme_retries_write(wlc_info_t *wlc); |
| static bool wlc_attach_stf_ant_init(wlc_info_t *wlc); |
| static uint wlc_attach_module(wlc_info_t *wlc); |
| static void wlc_detach_module(wlc_info_t *wlc); |
| static void wlc_timers_deinit(wlc_info_t *wlc); |
| static void wlc_down_led_upd(wlc_info_t *wlc); |
| static uint wlc_down_del_timer(wlc_info_t *wlc); |
| static void wlc_ofdm_rateset_war(wlc_info_t *wlc); |
| static int _wlc_ioctl(wlc_info_t *wlc, int cmd, void *arg, int len, |
| struct wlc_if *wlcif); |
| |
| #if defined(BCMDBG) |
| void wlc_get_rcmta(wlc_info_t *wlc, int idx, struct ether_addr *addr) |
| { |
| d11regs_t *regs = wlc->regs; |
| uint32 v32; |
| osl_t *osh; |
| |
| WL_TRACE(("wl%d: %s\n", WLCWLUNIT(wlc), __func__)); |
| |
| ASSERT(wlc->pub->corerev > 4); |
| |
| osh = wlc->osh; |
| |
| W_REG(osh, ®s->objaddr, (OBJADDR_RCMTA_SEL | (idx * 2))); |
| (void)R_REG(osh, ®s->objaddr); |
| v32 = R_REG(osh, ®s->objdata); |
| addr->octet[0] = (u8) v32; |
| addr->octet[1] = (u8) (v32 >> 8); |
| addr->octet[2] = (u8) (v32 >> 16); |
| addr->octet[3] = (u8) (v32 >> 24); |
| W_REG(osh, ®s->objaddr, (OBJADDR_RCMTA_SEL | ((idx * 2) + 1))); |
| (void)R_REG(osh, ®s->objaddr); |
| v32 = R_REG(osh, (volatile uint16 *)(uintptr) & regs->objdata); |
| addr->octet[4] = (u8) v32; |
| addr->octet[5] = (u8) (v32 >> 8); |
| } |
| #endif /* defined(BCMDBG) */ |
| |
| /* keep the chip awake if needed */ |
| bool wlc_stay_awake(wlc_info_t *wlc) |
| { |
| return TRUE; |
| } |
| |
| /* conditions under which the PM bit should be set in outgoing frames and STAY_AWAKE is meaningful |
| */ |
| bool wlc_ps_allowed(wlc_info_t *wlc) |
| { |
| int idx; |
| wlc_bsscfg_t *cfg; |
| |
| /* disallow PS when one of the following global conditions meets */ |
| if (!wlc->pub->associated || !wlc->PMenabled || wlc->PM_override) |
| return FALSE; |
| |
| /* disallow PS when one of these meets when not scanning */ |
| if (!wlc->PMblocked) { |
| if (AP_ACTIVE(wlc) || wlc->monitor) |
| return FALSE; |
| } |
| |
| FOREACH_AS_STA(wlc, idx, cfg) { |
| /* disallow PS when one of the following bsscfg specific conditions meets */ |
| if (!cfg->BSS || !WLC_PORTOPEN(cfg)) |
| return FALSE; |
| |
| if (!cfg->dtim_programmed) |
| return FALSE; |
| } |
| |
| return TRUE; |
| } |
| |
| void BCMINITFN(wlc_reset) (wlc_info_t *wlc) |
| { |
| WL_TRACE(("wl%d: wlc_reset\n", wlc->pub->unit)); |
| |
| wlc->check_for_unaligned_tbtt = FALSE; |
| |
| /* slurp up hw mac counters before core reset */ |
| if (WLC_UPDATE_STATS(wlc)) { |
| wlc_statsupd(wlc); |
| |
| /* reset our snapshot of macstat counters */ |
| bzero((char *)wlc->core->macstat_snapshot, sizeof(macstat_t)); |
| } |
| |
| wlc_bmac_reset(wlc->hw); |
| wlc_ampdu_reset(wlc->ampdu); |
| wlc->txretried = 0; |
| |
| #ifdef WLC_HIGH_ONLY |
| /* Need to set a flag(to be cleared asynchronously by BMAC driver with high call) |
| * in order to prevent wlc_rpctx_txreclaim() from screwing wlc_rpctx_getnexttxp(), |
| * which could be invoked by already QUEUED high call(s) from BMAC driver before |
| * wlc_bmac_reset() finishes. |
| * It's not needed before in monolithic driver model because d11core interrupts would |
| * have been cleared instantly in wlc_bmac_reset() and no txstatus interrupt |
| * will come to driver to fetch those flushed dma pkt pointers. |
| */ |
| wlc->reset_bmac_pending = TRUE; |
| |
| wlc_rpctx_txreclaim(wlc->rpctx); |
| |
| wlc_stf_phy_txant_upd(wlc); |
| wlc_phy_ant_rxdiv_set(wlc->band->pi, wlc->stf->ant_rx_ovr); |
| #endif |
| } |
| |
| void wlc_fatal_error(wlc_info_t *wlc) |
| { |
| WL_ERROR(("wl%d: fatal error, reinitializing\n", wlc->pub->unit)); |
| wl_init(wlc->wl); |
| } |
| |
| /* Return the channel the driver should initialize during wlc_init. |
| * the channel may have to be changed from the currently configured channel |
| * if other configurations are in conflict (bandlocked, 11n mode disabled, |
| * invalid channel for current country, etc.) |
| */ |
| static chanspec_t BCMINITFN(wlc_init_chanspec) (wlc_info_t *wlc) |
| { |
| chanspec_t chanspec = |
| 1 | WL_CHANSPEC_BW_20 | WL_CHANSPEC_CTL_SB_NONE | |
| WL_CHANSPEC_BAND_2G; |
| |
| /* make sure the channel is on the supported band if we are band-restricted */ |
| if (wlc->bandlocked || NBANDS(wlc) == 1) { |
| ASSERT(CHSPEC_WLCBANDUNIT(chanspec) == wlc->band->bandunit); |
| } |
| ASSERT(wlc_valid_chanspec_db(wlc->cmi, chanspec)); |
| return chanspec; |
| } |
| |
| struct scb global_scb; |
| |
| static void wlc_init_scb(wlc_info_t *wlc, struct scb *scb) |
| { |
| int i; |
| scb->flags = SCB_WMECAP | SCB_HTCAP; |
| for (i = 0; i < NUMPRIO; i++) |
| scb->seqnum[i] = 0; |
| } |
| |
| void BCMINITFN(wlc_init) (wlc_info_t *wlc) |
| { |
| d11regs_t *regs; |
| chanspec_t chanspec; |
| int i; |
| wlc_bsscfg_t *bsscfg; |
| bool mute = FALSE; |
| |
| WL_TRACE(("wl%d: wlc_init\n", wlc->pub->unit)); |
| |
| regs = wlc->regs; |
| |
| /* This will happen if a big-hammer was executed. In that case, we want to go back |
| * to the channel that we were on and not new channel |
| */ |
| if (wlc->pub->associated) |
| chanspec = wlc->home_chanspec; |
| else |
| chanspec = wlc_init_chanspec(wlc); |
| |
| wlc_bmac_init(wlc->hw, chanspec, mute); |
| |
| wlc->seckeys = wlc_bmac_read_shm(wlc->hw, M_SECRXKEYS_PTR) * 2; |
| if (D11REV_GE(wlc->pub->corerev, 15) && (wlc->machwcap & MCAP_TKIPMIC)) |
| wlc->tkmickeys = |
| wlc_bmac_read_shm(wlc->hw, M_TKMICKEYS_PTR) * 2; |
| |
| /* update beacon listen interval */ |
| wlc_bcn_li_upd(wlc); |
| wlc->bcn_wait_prd = |
| (u8) (wlc_bmac_read_shm(wlc->hw, M_NOSLPZNATDTIM) >> 10); |
| ASSERT(wlc->bcn_wait_prd > 0); |
| |
| /* the world is new again, so is our reported rate */ |
| wlc_reprate_init(wlc); |
| |
| /* write ethernet address to core */ |
| FOREACH_BSS(wlc, i, bsscfg) { |
| wlc_set_mac(bsscfg); |
| wlc_set_bssid(bsscfg); |
| } |
| |
| /* Update tsf_cfprep if associated and up */ |
| if (wlc->pub->associated) { |
| FOREACH_BSS(wlc, i, bsscfg) { |
| if (bsscfg->up) { |
| uint32 bi; |
| |
| /* get beacon period from bsscfg and convert to uS */ |
| bi = bsscfg->current_bss->beacon_period << 10; |
| /* update the tsf_cfprep register */ |
| /* since init path would reset to default value */ |
| W_REG(wlc->osh, ®s->tsf_cfprep, |
| (bi << CFPREP_CBI_SHIFT)); |
| |
| /* Update maccontrol PM related bits */ |
| wlc_set_ps_ctrl(wlc); |
| |
| break; |
| } |
| } |
| } |
| |
| wlc_key_hw_init_all(wlc); |
| |
| wlc_bandinit_ordered(wlc, chanspec); |
| |
| wlc_init_scb(wlc, &global_scb); |
| |
| /* init probe response timeout */ |
| wlc_write_shm(wlc, M_PRS_MAXTIME, wlc->prb_resp_timeout); |
| |
| /* init max burst txop (framebursting) */ |
| wlc_write_shm(wlc, M_MBURST_TXOP, |
| (wlc-> |
| _rifs ? (EDCF_AC_VO_TXOP_AP << 5) : MAXFRAMEBURST_TXOP)); |
| |
| /* initialize maximum allowed duty cycle */ |
| wlc_duty_cycle_set(wlc, wlc->tx_duty_cycle_ofdm, TRUE, TRUE); |
| wlc_duty_cycle_set(wlc, wlc->tx_duty_cycle_cck, FALSE, TRUE); |
| |
| /* Update some shared memory locations related to max AMPDU size allowed to received */ |
| wlc_ampdu_shm_upd(wlc->ampdu); |
| |
| /* band-specific inits */ |
| wlc_bsinit(wlc); |
| |
| /* Enable EDCF mode (while the MAC is suspended) */ |
| if (EDCF_ENAB(wlc->pub)) { |
| OR_REG(wlc->osh, ®s->ifs_ctl, IFS_USEEDCF); |
| wlc_edcf_setparams(wlc->cfg, FALSE); |
| } |
| |
| /* Init precedence maps for empty FIFOs */ |
| wlc_tx_prec_map_init(wlc); |
| |
| /* read the ucode version if we have not yet done so */ |
| if (wlc->ucode_rev == 0) { |
| wlc->ucode_rev = |
| wlc_read_shm(wlc, M_BOM_REV_MAJOR) << NBITS(uint16); |
| wlc->ucode_rev |= wlc_read_shm(wlc, M_BOM_REV_MINOR); |
| } |
| |
| /* ..now really unleash hell (allow the MAC out of suspend) */ |
| wlc_enable_mac(wlc); |
| |
| /* clear tx flow control */ |
| wlc_txflowcontrol_reset(wlc); |
| |
| /* clear tx data fifo suspends */ |
| wlc->tx_suspended = FALSE; |
| |
| /* enable the RF Disable Delay timer */ |
| if (D11REV_GE(wlc->pub->corerev, 10)) |
| W_REG(wlc->osh, &wlc->regs->rfdisabledly, RFDISABLE_DEFAULT); |
| |
| /* initialize mpc delay */ |
| wlc->mpc_delay_off = wlc->mpc_dlycnt = WLC_MPC_MIN_DELAYCNT; |
| |
| /* |
| * Initialize WME parameters; if they haven't been set by some other |
| * mechanism (IOVar, etc) then read them from the hardware. |
| */ |
| if (WLC_WME_RETRY_SHORT_GET(wlc, 0) == 0) { /* Unintialized; read from HW */ |
| int ac; |
| |
| ASSERT(wlc->clk); |
| for (ac = 0; ac < AC_COUNT; ac++) { |
| wlc->wme_retries[ac] = |
| wlc_read_shm(wlc, M_AC_TXLMT_ADDR(ac)); |
| } |
| } |
| } |
| |
| void wlc_mac_bcn_promisc_change(wlc_info_t *wlc, bool promisc) |
| { |
| wlc->bcnmisc_monitor = promisc; |
| wlc_mac_bcn_promisc(wlc); |
| } |
| |
| void wlc_mac_bcn_promisc(wlc_info_t *wlc) |
| { |
| if ((AP_ENAB(wlc->pub) && (N_ENAB(wlc->pub) || wlc->band->gmode)) || |
| wlc->bcnmisc_ibss || wlc->bcnmisc_scan || wlc->bcnmisc_monitor) |
| wlc_mctrl(wlc, MCTL_BCNS_PROMISC, MCTL_BCNS_PROMISC); |
| else |
| wlc_mctrl(wlc, MCTL_BCNS_PROMISC, 0); |
| } |
| |
| /* set or clear maccontrol bits MCTL_PROMISC and MCTL_KEEPCONTROL */ |
| void wlc_mac_promisc(wlc_info_t *wlc) |
| { |
| uint32 promisc_bits = 0; |
| |
| /* promiscuous mode just sets MCTL_PROMISC |
| * Note: APs get all BSS traffic without the need to set the MCTL_PROMISC bit |
| * since all BSS data traffic is directed at the AP |
| */ |
| if (PROMISC_ENAB(wlc->pub) && !AP_ENAB(wlc->pub) && !wlc->wet) |
| promisc_bits |= MCTL_PROMISC; |
| |
| /* monitor mode needs both MCTL_PROMISC and MCTL_KEEPCONTROL |
| * Note: monitor mode also needs MCTL_BCNS_PROMISC, but that is |
| * handled in wlc_mac_bcn_promisc() |
| */ |
| if (MONITOR_ENAB(wlc)) |
| promisc_bits |= MCTL_PROMISC | MCTL_KEEPCONTROL; |
| |
| wlc_mctrl(wlc, MCTL_PROMISC | MCTL_KEEPCONTROL, promisc_bits); |
| } |
| |
| /* check if hps and wake states of sw and hw are in sync */ |
| bool wlc_ps_check(wlc_info_t *wlc) |
| { |
| bool res = TRUE; |
| bool hps, wake; |
| bool wake_ok; |
| |
| if (!AP_ACTIVE(wlc)) { |
| volatile uint32 tmp; |
| tmp = R_REG(wlc->osh, &wlc->regs->maccontrol); |
| |
| /* If deviceremoved is detected, then don't take any action as this can be called |
| * in any context. Assume that caller will take care of the condition. This is just |
| * to avoid assert |
| */ |
| if (tmp == 0xffffffff) { |
| WL_ERROR(("wl%d: %s: dead chip\n", wlc->pub->unit, |
| __func__)); |
| return DEVICEREMOVED(wlc); |
| } |
| |
| hps = PS_ALLOWED(wlc); |
| |
| if (hps != ((tmp & MCTL_HPS) != 0)) { |
| int idx; |
| wlc_bsscfg_t *cfg; |
| WL_ERROR(("wl%d: hps not sync, sw %d, maccontrol 0x%x\n", wlc->pub->unit, hps, tmp)); |
| FOREACH_BSS(wlc, idx, cfg) { |
| if (!BSSCFG_STA(cfg)) |
| continue; |
| } |
| |
| res = FALSE; |
| } |
| #ifdef WLC_LOW |
| /* For a monolithic build the wake check can be exact since it looks at wake |
| * override bits. The MCTL_WAKE bit should match the 'wake' value. |
| */ |
| wake = STAY_AWAKE(wlc) || wlc->hw->wake_override; |
| wake_ok = (wake == ((tmp & MCTL_WAKE) != 0)); |
| #else |
| /* For a split build we will not have access to any wake overrides from the low |
| * level. The check can only make sure the MCTL_WAKE bit is on if the high |
| * level 'wake' value is true. If the high level 'wake' is false, the MCTL_WAKE |
| * may be either true or false due to the low level override. |
| */ |
| wake = STAY_AWAKE(wlc); |
| wake_ok = (wake && ((tmp & MCTL_WAKE) != 0)) || !wake; |
| #endif |
| if (hps && !wake_ok) { |
| WL_ERROR(("wl%d: wake not sync, sw %d maccontrol 0x%x\n", wlc->pub->unit, wake, tmp)); |
| res = FALSE; |
| } |
| } |
| ASSERT(res); |
| return res; |
| } |
| |
| /* push sw hps and wake state through hardware */ |
| void wlc_set_ps_ctrl(wlc_info_t *wlc) |
| { |
| uint32 v1, v2; |
| bool hps, wake; |
| bool awake_before; |
| |
| hps = PS_ALLOWED(wlc); |
| wake = hps ? (STAY_AWAKE(wlc)) : TRUE; |
| |
| WL_TRACE(("wl%d: wlc_set_ps_ctrl: hps %d wake %d\n", wlc->pub->unit, |
| hps, wake)); |
| |
| v1 = R_REG(wlc->osh, &wlc->regs->maccontrol); |
| v2 = 0; |
| if (hps) |
| v2 |= MCTL_HPS; |
| if (wake) |
| v2 |= MCTL_WAKE; |
| |
| wlc_mctrl(wlc, MCTL_WAKE | MCTL_HPS, v2); |
| |
| awake_before = ((v1 & MCTL_WAKE) || ((v1 & MCTL_HPS) == 0)); |
| |
| if (wake && !awake_before) |
| wlc_bmac_wait_for_wake(wlc->hw); |
| |
| } |
| |
| /* |
| * Write this BSS config's MAC address to core. |
| * Updates RXE match engine. |
| */ |
| int wlc_set_mac(wlc_bsscfg_t *cfg) |
| { |
| int err = 0; |
| wlc_info_t *wlc = cfg->wlc; |
| |
| if (cfg == wlc->cfg) { |
| /* enter the MAC addr into the RXE match registers */ |
| wlc_set_addrmatch(wlc, RCM_MAC_OFFSET, &cfg->cur_etheraddr); |
| } |
| |
| wlc_ampdu_macaddr_upd(wlc); |
| |
| return err; |
| } |
| |
| /* Write the BSS config's BSSID address to core (set_bssid in d11procs.tcl). |
| * Updates RXE match engine. |
| */ |
| void wlc_set_bssid(wlc_bsscfg_t *cfg) |
| { |
| wlc_info_t *wlc = cfg->wlc; |
| |
| /* if primary config, we need to update BSSID in RXE match registers */ |
| if (cfg == wlc->cfg) { |
| wlc_set_addrmatch(wlc, RCM_BSSID_OFFSET, &cfg->BSSID); |
| } |
| #ifdef SUPPORT_HWKEYS |
| else if (BSSCFG_STA(cfg) && cfg->BSS) { |
| wlc_rcmta_add_bssid(wlc, cfg); |
| } |
| #endif |
| } |
| |
| /* |
| * Suspend the the MAC and update the slot timing |
| * for standard 11b/g (20us slots) or shortslot 11g (9us slots). |
| */ |
| void wlc_switch_shortslot(wlc_info_t *wlc, bool shortslot) |
| { |
| int idx; |
| wlc_bsscfg_t *cfg; |
| |
| ASSERT(wlc->band->gmode); |
| |
| /* use the override if it is set */ |
| if (wlc->shortslot_override != WLC_SHORTSLOT_AUTO) |
| shortslot = (wlc->shortslot_override == WLC_SHORTSLOT_ON); |
| |
| if (wlc->shortslot == shortslot) |
| return; |
| |
| wlc->shortslot = shortslot; |
| |
| /* update the capability based on current shortslot mode */ |
| FOREACH_BSS(wlc, idx, cfg) { |
| if (!cfg->associated) |
| continue; |
| cfg->current_bss->capability &= ~DOT11_CAP_SHORTSLOT; |
| if (wlc->shortslot) |
| cfg->current_bss->capability |= DOT11_CAP_SHORTSLOT; |
| } |
| |
| wlc_bmac_set_shortslot(wlc->hw, shortslot); |
| } |
| |
| static u8 wlc_local_constraint_qdbm(wlc_info_t *wlc) |
| { |
| u8 local; |
| int16 local_max; |
| |
| local = WLC_TXPWR_MAX; |
| if (wlc->pub->associated && |
| (wf_chspec_ctlchan(wlc->chanspec) == |
| wf_chspec_ctlchan(wlc->home_chanspec))) { |
| |
| /* get the local power constraint if we are on the AP's |
| * channel [802.11h, 7.3.2.13] |
| */ |
| /* Clamp the value between 0 and WLC_TXPWR_MAX w/o overflowing the target */ |
| local_max = |
| (wlc->txpwr_local_max - |
| wlc->txpwr_local_constraint) * WLC_TXPWR_DB_FACTOR; |
| if (local_max > 0 && local_max < WLC_TXPWR_MAX) |
| return (u8) local_max; |
| if (local_max < 0) |
| return 0; |
| } |
| |
| return local; |
| } |
| |
| /* propagate home chanspec to all bsscfgs in case bsscfg->current_bss->chanspec is referenced */ |
| void wlc_set_home_chanspec(wlc_info_t *wlc, chanspec_t chanspec) |
| { |
| if (wlc->home_chanspec != chanspec) { |
| int idx; |
| wlc_bsscfg_t *cfg; |
| |
| wlc->home_chanspec = chanspec; |
| |
| FOREACH_BSS(wlc, idx, cfg) { |
| if (!cfg->associated) |
| continue; |
| cfg->target_bss->chanspec = chanspec; |
| cfg->current_bss->chanspec = chanspec; |
| } |
| |
| } |
| } |
| |
| static void wlc_set_phy_chanspec(wlc_info_t *wlc, chanspec_t chanspec) |
| { |
| /* Save our copy of the chanspec */ |
| wlc->chanspec = chanspec; |
| |
| /* Set the chanspec and power limits for this locale after computing |
| * any 11h local tx power constraints. |
| */ |
| wlc_channel_set_chanspec(wlc->cmi, chanspec, |
| wlc_local_constraint_qdbm(wlc)); |
| |
| if (wlc->stf->ss_algosel_auto) |
| wlc_stf_ss_algo_channel_get(wlc, &wlc->stf->ss_algo_channel, |
| chanspec); |
| |
| wlc_stf_ss_update(wlc, wlc->band); |
| |
| } |
| |
| void wlc_set_chanspec(wlc_info_t *wlc, chanspec_t chanspec) |
| { |
| uint bandunit; |
| bool switchband = FALSE; |
| chanspec_t old_chanspec = wlc->chanspec; |
| |
| if (!wlc_valid_chanspec_db(wlc->cmi, chanspec)) { |
| WL_ERROR(("wl%d: %s: Bad channel %d\n", |
| wlc->pub->unit, __func__, CHSPEC_CHANNEL(chanspec))); |
| ASSERT(wlc_valid_chanspec_db(wlc->cmi, chanspec)); |
| return; |
| } |
| |
| /* Switch bands if necessary */ |
| if (NBANDS(wlc) > 1) { |
| bandunit = CHSPEC_WLCBANDUNIT(chanspec); |
| if (wlc->band->bandunit != bandunit || wlc->bandinit_pending) { |
| switchband = TRUE; |
| if (wlc->bandlocked) { |
| WL_ERROR(("wl%d: %s: chspec %d band is locked!\n", wlc->pub->unit, __func__, CHSPEC_CHANNEL(chanspec))); |
| return; |
| } |
| /* BMAC_NOTE: should the setband call come after the wlc_bmac_chanspec() ? |
| * if the setband updates (wlc_bsinit) use low level calls to inspect and |
| * set state, the state inspected may be from the wrong band, or the |
| * following wlc_bmac_set_chanspec() may undo the work. |
| */ |
| wlc_setband(wlc, bandunit); |
| } |
| } |
| |
| ASSERT(N_ENAB(wlc->pub) || !CHSPEC_IS40(chanspec)); |
| |
| /* sync up phy/radio chanspec */ |
| wlc_set_phy_chanspec(wlc, chanspec); |
| |
| /* init antenna selection */ |
| if (CHSPEC_WLC_BW(old_chanspec) != CHSPEC_WLC_BW(chanspec)) { |
| if (WLANTSEL_ENAB(wlc)) |
| wlc_antsel_init(wlc->asi); |
| |
| /* Fix the hardware rateset based on bw. |
| * Mainly add MCS32 for 40Mhz, remove MCS 32 for 20Mhz |
| */ |
| wlc_rateset_bw_mcs_filter(&wlc->band->hw_rateset, |
| wlc->band-> |
| mimo_cap_40 ? CHSPEC_WLC_BW(chanspec) |
| : 0); |
| } |
| |
| /* update some mac configuration since chanspec changed */ |
| wlc_ucode_mac_upd(wlc); |
| } |
| |
| #if defined(BCMDBG) |
| static int wlc_get_current_txpwr(wlc_info_t *wlc, void *pwr, uint len) |
| { |
| txpwr_limits_t txpwr; |
| tx_power_t power; |
| tx_power_legacy_t *old_power = NULL; |
| int r, c; |
| uint qdbm; |
| bool override; |
| |
| if (len == sizeof(tx_power_legacy_t)) |
| old_power = (tx_power_legacy_t *) pwr; |
| else if (len < sizeof(tx_power_t)) |
| return BCME_BUFTOOSHORT; |
| |
| bzero(&power, sizeof(tx_power_t)); |
| |
| power.chanspec = WLC_BAND_PI_RADIO_CHANSPEC; |
| if (wlc->pub->associated) |
| power.local_chanspec = wlc->home_chanspec; |
| |
| /* Return the user target tx power limits for the various rates. Note wlc_phy.c's |
| * public interface only implements getting and setting a single value for all of |
| * rates, so we need to fill the array ourselves. |
| */ |
| wlc_phy_txpower_get(wlc->band->pi, &qdbm, &override); |
| for (r = 0; r < WL_TX_POWER_RATES; r++) { |
| power.user_limit[r] = (u8) qdbm; |
| } |
| |
| power.local_max = wlc->txpwr_local_max * WLC_TXPWR_DB_FACTOR; |
| power.local_constraint = |
| wlc->txpwr_local_constraint * WLC_TXPWR_DB_FACTOR; |
| |
| power.antgain[0] = wlc->bandstate[BAND_2G_INDEX]->antgain; |
| power.antgain[1] = wlc->bandstate[BAND_5G_INDEX]->antgain; |
| |
| wlc_channel_reg_limits(wlc->cmi, power.chanspec, &txpwr); |
| |
| #if WL_TX_POWER_CCK_NUM != WLC_NUM_RATES_CCK |
| #error "WL_TX_POWER_CCK_NUM != WLC_NUM_RATES_CCK" |
| #endif |
| |
| /* CCK tx power limits */ |
| for (c = 0, r = WL_TX_POWER_CCK_FIRST; c < WL_TX_POWER_CCK_NUM; |
| c++, r++) |
| power.reg_limit[r] = txpwr.cck[c]; |
| |
| #if WL_TX_POWER_OFDM_NUM != WLC_NUM_RATES_OFDM |
| #error "WL_TX_POWER_OFDM_NUM != WLC_NUM_RATES_OFDM" |
| #endif |
| |
| /* 20 MHz OFDM SISO tx power limits */ |
| for (c = 0, r = WL_TX_POWER_OFDM_FIRST; c < WL_TX_POWER_OFDM_NUM; |
| c++, r++) |
| power.reg_limit[r] = txpwr.ofdm[c]; |
| |
| if (WLC_PHY_11N_CAP(wlc->band)) { |
| |
| /* 20 MHz OFDM CDD tx power limits */ |
| for (c = 0, r = WL_TX_POWER_OFDM20_CDD_FIRST; |
| c < WL_TX_POWER_OFDM_NUM; c++, r++) |
| power.reg_limit[r] = txpwr.ofdm_cdd[c]; |
| |
| /* 40 MHz OFDM SISO tx power limits */ |
| for (c = 0, r = WL_TX_POWER_OFDM40_SISO_FIRST; |
| c < WL_TX_POWER_OFDM_NUM; c++, r++) |
| power.reg_limit[r] = txpwr.ofdm_40_siso[c]; |
| |
| /* 40 MHz OFDM CDD tx power limits */ |
| for (c = 0, r = WL_TX_POWER_OFDM40_CDD_FIRST; |
| c < WL_TX_POWER_OFDM_NUM; c++, r++) |
| power.reg_limit[r] = txpwr.ofdm_40_cdd[c]; |
| |
| #if WL_TX_POWER_MCS_1_STREAM_NUM != WLC_NUM_RATES_MCS_1_STREAM |
| #error "WL_TX_POWER_MCS_1_STREAM_NUM != WLC_NUM_RATES_MCS_1_STREAM" |
| #endif |
| |
| /* 20MHz MCS0-7 SISO tx power limits */ |
| for (c = 0, r = WL_TX_POWER_MCS20_SISO_FIRST; |
| c < WLC_NUM_RATES_MCS_1_STREAM; c++, r++) |
| power.reg_limit[r] = txpwr.mcs_20_siso[c]; |
| |
| /* 20MHz MCS0-7 CDD tx power limits */ |
| for (c = 0, r = WL_TX_POWER_MCS20_CDD_FIRST; |
| c < WLC_NUM_RATES_MCS_1_STREAM; c++, r++) |
| power.reg_limit[r] = txpwr.mcs_20_cdd[c]; |
| |
| /* 20MHz MCS0-7 STBC tx power limits */ |
| for (c = 0, r = WL_TX_POWER_MCS20_STBC_FIRST; |
| c < WLC_NUM_RATES_MCS_1_STREAM; c++, r++) |
| power.reg_limit[r] = txpwr.mcs_20_stbc[c]; |
| |
| /* 40MHz MCS0-7 SISO tx power limits */ |
| for (c = 0, r = WL_TX_POWER_MCS40_SISO_FIRST; |
| c < WLC_NUM_RATES_MCS_1_STREAM; c++, r++) |
| power.reg_limit[r] = txpwr.mcs_40_siso[c]; |
| |
| /* 40MHz MCS0-7 CDD tx power limits */ |
| for (c = 0, r = WL_TX_POWER_MCS40_CDD_FIRST; |
| c < WLC_NUM_RATES_MCS_1_STREAM; c++, r++) |
| power.reg_limit[r] = txpwr.mcs_40_cdd[c]; |
| |
| /* 40MHz MCS0-7 STBC tx power limits */ |
| for (c = 0, r = WL_TX_POWER_MCS40_STBC_FIRST; |
| c < WLC_NUM_RATES_MCS_1_STREAM; c++, r++) |
| power.reg_limit[r] = txpwr.mcs_40_stbc[c]; |
| |
| #if WL_TX_POWER_MCS_2_STREAM_NUM != WLC_NUM_RATES_MCS_2_STREAM |
| #error "WL_TX_POWER_MCS_2_STREAM_NUM != WLC_NUM_RATES_MCS_2_STREAM" |
| #endif |
| |
| /* 20MHz MCS8-15 SDM tx power limits */ |
| for (c = 0, r = WL_TX_POWER_MCS20_SDM_FIRST; |
| c < WLC_NUM_RATES_MCS_2_STREAM; c++, r++) |
| power.reg_limit[r] = txpwr.mcs_20_mimo[c]; |
| |
| /* 40MHz MCS8-15 SDM tx power limits */ |
| for (c = 0, r = WL_TX_POWER_MCS40_SDM_FIRST; |
| c < WLC_NUM_RATES_MCS_2_STREAM; c++, r++) |
| power.reg_limit[r] = txpwr.mcs_40_mimo[c]; |
| |
| /* MCS 32 */ |
| power.reg_limit[WL_TX_POWER_MCS_32] = txpwr.mcs32; |
| } |
| |
| wlc_phy_txpower_get_current(wlc->band->pi, &power, |
| CHSPEC_CHANNEL(power.chanspec)); |
| |
| /* copy the tx_power_t struct to the return buffer, |
| * or convert to a tx_power_legacy_t struct |
| */ |
| if (!old_power) { |
| bcopy(&power, pwr, sizeof(tx_power_t)); |
| } else { |
| int band_idx = CHSPEC_IS2G(power.chanspec) ? 0 : 1; |
| |
| bzero(old_power, sizeof(tx_power_legacy_t)); |
| |
| old_power->txpwr_local_max = power.local_max; |
| old_power->txpwr_local_constraint = power.local_constraint; |
| if (CHSPEC_IS2G(power.chanspec)) { |
| old_power->txpwr_chan_reg_max = txpwr.cck[0]; |
| old_power->txpwr_est_Pout[band_idx] = |
| power.est_Pout_cck; |
| old_power->txpwr_est_Pout_gofdm = power.est_Pout[0]; |
| } else { |
| old_power->txpwr_chan_reg_max = txpwr.ofdm[0]; |
| old_power->txpwr_est_Pout[band_idx] = power.est_Pout[0]; |
| } |
| old_power->txpwr_antgain[0] = power.antgain[0]; |
| old_power->txpwr_antgain[1] = power.antgain[1]; |
| |
| for (r = 0; r < NUM_PWRCTRL_RATES; r++) { |
| old_power->txpwr_band_max[r] = power.user_limit[r]; |
| old_power->txpwr_limit[r] = power.reg_limit[r]; |
| old_power->txpwr_target[band_idx][r] = power.target[r]; |
| if (CHSPEC_IS2G(power.chanspec)) |
| old_power->txpwr_bphy_cck_max[r] = |
| power.board_limit[r]; |
| else |
| old_power->txpwr_aphy_max[r] = |
| power.board_limit[r]; |
| } |
| } |
| |
| return 0; |
| } |
| #endif /* defined(BCMDBG) */ |
| |
| static uint32 wlc_watchdog_backup_bi(wlc_info_t *wlc) |
| { |
| uint32 bi; |
| bi = 2 * wlc->cfg->current_bss->dtim_period * |
| wlc->cfg->current_bss->beacon_period; |
| if (wlc->bcn_li_dtim) |
| bi *= wlc->bcn_li_dtim; |
| else if (wlc->bcn_li_bcn) |
| /* recalculate bi based on bcn_li_bcn */ |
| bi = 2 * wlc->bcn_li_bcn * wlc->cfg->current_bss->beacon_period; |
| |
| if (bi < 2 * TIMER_INTERVAL_WATCHDOG) |
| bi = 2 * TIMER_INTERVAL_WATCHDOG; |
| return bi; |
| } |
| |
| /* Change to run the watchdog either from a periodic timer or from tbtt handler. |
| * Call watchdog from tbtt handler if tbtt is TRUE, watchdog timer otherwise. |
| */ |
| void wlc_watchdog_upd(wlc_info_t *wlc, bool tbtt) |
| { |
| /* make sure changing watchdog driver is allowed */ |
| if (!wlc->pub->up || !wlc->pub->align_wd_tbtt) |
| return; |
| if (!tbtt && wlc->WDarmed) { |
| wl_del_timer(wlc->wl, wlc->wdtimer); |
| wlc->WDarmed = FALSE; |
| } |
| |
| /* stop watchdog timer and use tbtt interrupt to drive watchdog */ |
| if (tbtt && wlc->WDarmed) { |
| wl_del_timer(wlc->wl, wlc->wdtimer); |
| wlc->WDarmed = FALSE; |
| wlc->WDlast = OSL_SYSUPTIME(); |
| } |
| /* arm watchdog timer and drive the watchdog there */ |
| else if (!tbtt && !wlc->WDarmed) { |
| wl_add_timer(wlc->wl, wlc->wdtimer, TIMER_INTERVAL_WATCHDOG, |
| TRUE); |
| wlc->WDarmed = TRUE; |
| } |
| if (tbtt && !wlc->WDarmed) { |
| wl_add_timer(wlc->wl, wlc->wdtimer, wlc_watchdog_backup_bi(wlc), |
| TRUE); |
| wlc->WDarmed = TRUE; |
| } |
| } |
| |
| ratespec_t wlc_lowest_basic_rspec(wlc_info_t *wlc, wlc_rateset_t *rs) |
| { |
| ratespec_t lowest_basic_rspec; |
| uint i; |
| |
| /* Use the lowest basic rate */ |
| lowest_basic_rspec = rs->rates[0] & RATE_MASK; |
| for (i = 0; i < rs->count; i++) { |
| if (rs->rates[i] & WLC_RATE_FLAG) { |
| lowest_basic_rspec = rs->rates[i] & RATE_MASK; |
| break; |
| } |
| } |
| #if NCONF |
| /* pick siso/cdd as default for OFDM (note no basic rate MCSs are supported yet) */ |
| if (IS_OFDM(lowest_basic_rspec)) { |
| lowest_basic_rspec |= (wlc->stf->ss_opmode << RSPEC_STF_SHIFT); |
| } |
| #endif |
| |
| return lowest_basic_rspec; |
| } |
| |
| /* This function changes the phytxctl for beacon based on current beacon ratespec AND txant |
| * setting as per this table: |
| * ratespec CCK ant = wlc->stf->txant |
| * OFDM ant = 3 |
| */ |
| void wlc_beacon_phytxctl_txant_upd(wlc_info_t *wlc, ratespec_t bcn_rspec) |
| { |
| uint16 phyctl; |
| uint16 phytxant = wlc->stf->phytxant; |
| uint16 mask = PHY_TXC_ANT_MASK; |
| |
| /* for non-siso rates or default setting, use the available chains */ |
| if (WLC_PHY_11N_CAP(wlc->band)) { |
| phytxant = wlc_stf_phytxchain_sel(wlc, bcn_rspec); |
| } |
| |
| phyctl = wlc_read_shm(wlc, M_BCN_PCTLWD); |
| phyctl = (phyctl & ~mask) | phytxant; |
| wlc_write_shm(wlc, M_BCN_PCTLWD, phyctl); |
| } |
| |
| /* centralized protection config change function to simplify debugging, no consistency checking |
| * this should be called only on changes to avoid overhead in periodic function |
| */ |
| void wlc_protection_upd(wlc_info_t *wlc, uint idx, int val) |
| { |
| WL_TRACE(("wlc_protection_upd: idx %d, val %d\n", idx, val)); |
| |
| switch (idx) { |
| case WLC_PROT_G_SPEC: |
| wlc->protection->_g = (bool) val; |
| break; |
| case WLC_PROT_G_OVR: |
| wlc->protection->g_override = (s8) val; |
| break; |
| case WLC_PROT_G_USER: |
| wlc->protection->gmode_user = (u8) val; |
| break; |
| case WLC_PROT_OVERLAP: |
| wlc->protection->overlap = (s8) val; |
| break; |
| case WLC_PROT_N_USER: |
| wlc->protection->nmode_user = (s8) val; |
| break; |
| case WLC_PROT_N_CFG: |
| wlc->protection->n_cfg = (s8) val; |
| break; |
| case WLC_PROT_N_CFG_OVR: |
| wlc->protection->n_cfg_override = (s8) val; |
| break; |
| case WLC_PROT_N_NONGF: |
| wlc->protection->nongf = (bool) val; |
| break; |
| case WLC_PROT_N_NONGF_OVR: |
| wlc->protection->nongf_override = (s8) val; |
| break; |
| case WLC_PROT_N_PAM_OVR: |
| wlc->protection->n_pam_override = (s8) val; |
| break; |
| case WLC_PROT_N_OBSS: |
| wlc->protection->n_obss = (bool) val; |
| break; |
| |
| default: |
| ASSERT(0); |
| break; |
| } |
| |
| } |
| |
| static void wlc_ht_update_sgi_rx(wlc_info_t *wlc, int val) |
| { |
| wlc->ht_cap.cap &= ~(HT_CAP_SHORT_GI_20 | HT_CAP_SHORT_GI_40); |
| wlc->ht_cap.cap |= (val & WLC_N_SGI_20) ? HT_CAP_SHORT_GI_20 : 0; |
| wlc->ht_cap.cap |= (val & WLC_N_SGI_40) ? HT_CAP_SHORT_GI_40 : 0; |
| |
| if (wlc->pub->up) { |
| wlc_update_beacon(wlc); |
| wlc_update_probe_resp(wlc, TRUE); |
| } |
| } |
| |
| static void wlc_ht_update_ldpc(wlc_info_t *wlc, s8 val) |
| { |
| wlc->stf->ldpc = val; |
| |
| wlc->ht_cap.cap &= ~HT_CAP_LDPC_CODING; |
| if (wlc->stf->ldpc != OFF) |
| wlc->ht_cap.cap |= HT_CAP_LDPC_CODING; |
| |
| if (wlc->pub->up) { |
| wlc_update_beacon(wlc); |
| wlc_update_probe_resp(wlc, TRUE); |
| wlc_phy_ldpc_override_set(wlc->band->pi, (val ? TRUE : FALSE)); |
| } |
| } |
| |
| /* |
| * ucode, hwmac update |
| * Channel dependent updates for ucode and hw |
| */ |
| static void wlc_ucode_mac_upd(wlc_info_t *wlc) |
| { |
| /* enable or disable any active IBSSs depending on whether or not |
| * we are on the home channel |
| */ |
| if (wlc->home_chanspec == WLC_BAND_PI_RADIO_CHANSPEC) { |
| if (wlc->pub->associated) { |
| /* BMAC_NOTE: This is something that should be fixed in ucode inits. |
| * I think that the ucode inits set up the bcn templates and shm values |
| * with a bogus beacon. This should not be done in the inits. If ucode needs |
| * to set up a beacon for testing, the test routines should write it down, |
| * not expect the inits to populate a bogus beacon. |
| */ |
| if (WLC_PHY_11N_CAP(wlc->band)) { |
| wlc_write_shm(wlc, M_BCN_TXTSF_OFFSET, |
| wlc->band->bcntsfoff); |
| } |
| } |
| } else { |
| /* disable an active IBSS if we are not on the home channel */ |
| } |
| |
| /* update the various promisc bits */ |
| wlc_mac_bcn_promisc(wlc); |
| wlc_mac_promisc(wlc); |
| } |
| |
| static void wlc_bandinit_ordered(wlc_info_t *wlc, chanspec_t chanspec) |
| { |
| wlc_rateset_t default_rateset; |
| uint parkband; |
| uint i, band_order[2]; |
| |
| WL_TRACE(("wl%d: wlc_bandinit_ordered\n", wlc->pub->unit)); |
| /* |
| * We might have been bandlocked during down and the chip power-cycled (hibernate). |
| * figure out the right band to park on |
| */ |
| if (wlc->bandlocked || NBANDS(wlc) == 1) { |
| ASSERT(CHSPEC_WLCBANDUNIT(chanspec) == wlc->band->bandunit); |
| |
| parkband = wlc->band->bandunit; /* updated in wlc_bandlock() */ |
| band_order[0] = band_order[1] = parkband; |
| } else { |
| /* park on the band of the specified chanspec */ |
| parkband = CHSPEC_WLCBANDUNIT(chanspec); |
| |
| /* order so that parkband initialize last */ |
| band_order[0] = parkband ^ 1; |
| band_order[1] = parkband; |
| } |
| |
| /* make each band operational, software state init */ |
| for (i = 0; i < NBANDS(wlc); i++) { |
| uint j = band_order[i]; |
| |
| wlc->band = wlc->bandstate[j]; |
| |
| wlc_default_rateset(wlc, &default_rateset); |
| |
| /* fill in hw_rate */ |
| wlc_rateset_filter(&default_rateset, &wlc->band->hw_rateset, |
| FALSE, WLC_RATES_CCK_OFDM, RATE_MASK, |
| (bool) N_ENAB(wlc->pub)); |
| |
| /* init basic rate lookup */ |
| wlc_rate_lookup_init(wlc, &default_rateset); |
| } |
| |
| /* sync up phy/radio chanspec */ |
| wlc_set_phy_chanspec(wlc, chanspec); |
| } |
| |
| /* band-specific init */ |
| static void WLBANDINITFN(wlc_bsinit) (wlc_info_t *wlc) |
| { |
| WL_TRACE(("wl%d: wlc_bsinit: bandunit %d\n", wlc->pub->unit, |
| wlc->band->bandunit)); |
| |
| /* write ucode ACK/CTS rate table */ |
| wlc_set_ratetable(wlc); |
| |
| /* update some band specific mac configuration */ |
| wlc_ucode_mac_upd(wlc); |
| |
| /* init antenna selection */ |
| if (WLANTSEL_ENAB(wlc)) |
| wlc_antsel_init(wlc->asi); |
| |
| } |
| |
| /* switch to and initialize new band */ |
| static void WLBANDINITFN(wlc_setband) (wlc_info_t *wlc, uint bandunit) |
| { |
| int idx; |
| wlc_bsscfg_t *cfg; |
| |
| ASSERT(NBANDS(wlc) > 1); |
| ASSERT(!wlc->bandlocked); |
| ASSERT(bandunit != wlc->band->bandunit || wlc->bandinit_pending); |
| |
| wlc->band = wlc->bandstate[bandunit]; |
| |
| if (!wlc->pub->up) |
| return; |
| |
| /* wait for at least one beacon before entering sleeping state */ |
| wlc->PMawakebcn = TRUE; |
| FOREACH_AS_STA(wlc, idx, cfg) |
| cfg->PMawakebcn = TRUE; |
| wlc_set_ps_ctrl(wlc); |
| |
| /* band-specific initializations */ |
| wlc_bsinit(wlc); |
| } |
| |
| /* Initialize a WME Parameter Info Element with default STA parameters from WMM Spec, Table 12 */ |
| void wlc_wme_initparams_sta(wlc_info_t *wlc, wme_param_ie_t *pe) |
| { |
| static const wme_param_ie_t stadef = { |
| WME_OUI, |
| WME_TYPE, |
| WME_SUBTYPE_PARAM_IE, |
| WME_VER, |
| 0, |
| 0, |
| { |
| {EDCF_AC_BE_ACI_STA, EDCF_AC_BE_ECW_STA, |
| HTOL16(EDCF_AC_BE_TXOP_STA)}, |
| {EDCF_AC_BK_ACI_STA, EDCF_AC_BK_ECW_STA, |
| HTOL16(EDCF_AC_BK_TXOP_STA)}, |
| {EDCF_AC_VI_ACI_STA, EDCF_AC_VI_ECW_STA, |
| HTOL16(EDCF_AC_VI_TXOP_STA)}, |
| {EDCF_AC_VO_ACI_STA, EDCF_AC_VO_ECW_STA, |
| HTOL16(EDCF_AC_VO_TXOP_STA)} |
| } |
| }; |
| |
| ASSERT(sizeof(*pe) == WME_PARAM_IE_LEN); |
| memcpy(pe, &stadef, sizeof(*pe)); |
| } |
| |
| void wlc_wme_setparams(wlc_info_t *wlc, u16 aci, void *arg, bool suspend) |
| { |
| int i; |
| shm_acparams_t acp_shm; |
| uint16 *shm_entry; |
| struct ieee80211_tx_queue_params *params = arg; |
| |
| ASSERT(wlc); |
| |
| /* Only apply params if the core is out of reset and has clocks */ |
| if (!wlc->clk) { |
| WL_ERROR(("wl%d: %s : no-clock\n", wlc->pub->unit, __func__)); |
| return; |
| } |
| |
| /* |
| * AP uses AC params from wme_param_ie_ap. |
| * AP advertises AC params from wme_param_ie. |
| * STA uses AC params from wme_param_ie. |
| */ |
| |
| wlc->wme_admctl = 0; |
| |
| do { |
| bzero((char *)&acp_shm, sizeof(shm_acparams_t)); |
| /* find out which ac this set of params applies to */ |
| ASSERT(aci < AC_COUNT); |
| /* set the admission control policy for this AC */ |
| /* wlc->wme_admctl |= 1 << aci; *//* should be set ?? seems like off by default */ |
| |
| /* fill in shm ac params struct */ |
| acp_shm.txop = ltoh16(params->txop); |
| /* convert from units of 32us to us for ucode */ |
| wlc->edcf_txop[aci & 0x3] = acp_shm.txop = |
| EDCF_TXOP2USEC(acp_shm.txop); |
| acp_shm.aifs = (params->aifs & EDCF_AIFSN_MASK); |
| |
| if (aci == AC_VI && acp_shm.txop == 0 |
| && acp_shm.aifs < EDCF_AIFSN_MAX) |
| acp_shm.aifs++; |
| |
| if (acp_shm.aifs < EDCF_AIFSN_MIN |
| || acp_shm.aifs > EDCF_AIFSN_MAX) { |
| WL_ERROR(("wl%d: wlc_edcf_setparams: bad aifs %d\n", |
| wlc->pub->unit, acp_shm.aifs)); |
| continue; |
| } |
| |
| acp_shm.cwmin = params->cw_min; |
| acp_shm.cwmax = params->cw_max; |
| acp_shm.cwcur = acp_shm.cwmin; |
| acp_shm.bslots = |
| R_REG(wlc->osh, &wlc->regs->tsf_random) & acp_shm.cwcur; |
| acp_shm.reggap = acp_shm.bslots + acp_shm.aifs; |
| /* Indicate the new params to the ucode */ |
| acp_shm.status = wlc_read_shm(wlc, (M_EDCF_QINFO + |
| wme_shmemacindex(aci) * |
| M_EDCF_QLEN + |
| M_EDCF_STATUS_OFF)); |
| acp_shm.status |= WME_STATUS_NEWAC; |
| |
| /* Fill in shm acparam table */ |
| shm_entry = (uint16 *) &acp_shm; |
| for (i = 0; i < (int)sizeof(shm_acparams_t); i += 2) |
| wlc_write_shm(wlc, |
| M_EDCF_QINFO + |
| wme_shmemacindex(aci) * M_EDCF_QLEN + i, |
| *shm_entry++); |
| |
| } while (0); |
| |
| if (suspend) |
| wlc_suspend_mac_and_wait(wlc); |
| |
| if (suspend) |
| wlc_enable_mac(wlc); |
| |
| } |
| |
| void wlc_edcf_setparams(wlc_bsscfg_t *cfg, bool suspend) |
| { |
| wlc_info_t *wlc = cfg->wlc; |
| uint aci, i, j; |
| edcf_acparam_t *edcf_acp; |
| shm_acparams_t acp_shm; |
| uint16 *shm_entry; |
| |
| ASSERT(cfg); |
| ASSERT(wlc); |
| |
| /* Only apply params if the core is out of reset and has clocks */ |
| if (!wlc->clk) |
| return; |
| |
| /* |
| * AP uses AC params from wme_param_ie_ap. |
| * AP advertises AC params from wme_param_ie. |
| * STA uses AC params from wme_param_ie. |
| */ |
| |
| edcf_acp = (edcf_acparam_t *) &wlc->wme_param_ie.acparam[0]; |
| |
| wlc->wme_admctl = 0; |
| |
| for (i = 0; i < AC_COUNT; i++, edcf_acp++) { |
| bzero((char *)&acp_shm, sizeof(shm_acparams_t)); |
| /* find out which ac this set of params applies to */ |
| aci = (edcf_acp->ACI & EDCF_ACI_MASK) >> EDCF_ACI_SHIFT; |
| ASSERT(aci < AC_COUNT); |
| /* set the admission control policy for this AC */ |
| if (edcf_acp->ACI & EDCF_ACM_MASK) { |
| wlc->wme_admctl |= 1 << aci; |
| } |
| |
| /* fill in shm ac params struct */ |
| acp_shm.txop = ltoh16(edcf_acp->TXOP); |
| /* convert from units of 32us to us for ucode */ |
| wlc->edcf_txop[aci] = acp_shm.txop = |
| EDCF_TXOP2USEC(acp_shm.txop); |
| acp_shm.aifs = (edcf_acp->ACI & EDCF_AIFSN_MASK); |
| |
| if (aci == AC_VI && acp_shm.txop == 0 |
| && acp_shm.aifs < EDCF_AIFSN_MAX) |
| acp_shm.aifs++; |
| |
| if (acp_shm.aifs < EDCF_AIFSN_MIN |
| || acp_shm.aifs > EDCF_AIFSN_MAX) { |
| WL_ERROR(("wl%d: wlc_edcf_setparams: bad aifs %d\n", |
| wlc->pub->unit, acp_shm.aifs)); |
| continue; |
| } |
| |
| /* CWmin = 2^(ECWmin) - 1 */ |
| acp_shm.cwmin = EDCF_ECW2CW(edcf_acp->ECW & EDCF_ECWMIN_MASK); |
| /* CWmax = 2^(ECWmax) - 1 */ |
| acp_shm.cwmax = EDCF_ECW2CW((edcf_acp->ECW & EDCF_ECWMAX_MASK) |
| >> EDCF_ECWMAX_SHIFT); |
| acp_shm.cwcur = acp_shm.cwmin; |
| acp_shm.bslots = |
| R_REG(wlc->osh, &wlc->regs->tsf_random) & acp_shm.cwcur; |
| acp_shm.reggap = acp_shm.bslots + acp_shm.aifs; |
| /* Indicate the new params to the ucode */ |
| acp_shm.status = wlc_read_shm(wlc, (M_EDCF_QINFO + |
| wme_shmemacindex(aci) * |
| M_EDCF_QLEN + |
| M_EDCF_STATUS_OFF)); |
| acp_shm.status |= WME_STATUS_NEWAC; |
| |
| /* Fill in shm acparam table */ |
| shm_entry = (uint16 *) &acp_shm; |
| for (j = 0; j < (int)sizeof(shm_acparams_t); j += 2) |
| wlc_write_shm(wlc, |
| M_EDCF_QINFO + |
| wme_shmemacindex(aci) * M_EDCF_QLEN + j, |
| *shm_entry++); |
| } |
| |
| if (suspend) |
| wlc_suspend_mac_and_wait(wlc); |
| |
| if (AP_ENAB(wlc->pub) && WME_ENAB(wlc->pub)) { |
| wlc_update_beacon(wlc); |
| wlc_update_probe_resp(wlc, FALSE); |
| } |
| |
| if (suspend) |
| wlc_enable_mac(wlc); |
| |
| } |
| |
| bool BCMATTACHFN(wlc_timers_init) (wlc_info_t *wlc, int unit) |
| { |
| wlc->wdtimer = wl_init_timer(wlc->wl, wlc_watchdog_by_timer, |
| wlc, "watchdog"); |
| if (!wlc->wdtimer) { |
| WL_ERROR(("wl%d: wl_init_timer for wdtimer failed\n", unit)); |
| goto fail; |
| } |
| |
| wlc->radio_timer = wl_init_timer(wlc->wl, wlc_radio_timer, |
| wlc, "radio"); |
| if (!wlc->radio_timer) { |
| WL_ERROR(("wl%d: wl_init_timer for radio_timer failed\n", |
| unit)); |
| goto fail; |
| } |
| |
| return TRUE; |
| |
| fail: |
| return FALSE; |
| } |
| |
| /* |
| * Initialize wlc_info default values ... |
| * may get overrides later in this function |
| */ |
| void BCMATTACHFN(wlc_info_init) (wlc_info_t *wlc, int unit) |
| { |
| int i; |
| /* Assume the device is there until proven otherwise */ |
| wlc->device_present = TRUE; |
| |
| /* set default power output percentage to 100 percent */ |
| wlc->txpwr_percent = 100; |
| |
| /* Save our copy of the chanspec */ |
| wlc->chanspec = CH20MHZ_CHSPEC(1); |
| |
| /* initialize CCK preamble mode to unassociated state */ |
| wlc->shortpreamble = FALSE; |
| |
| wlc->legacy_probe = TRUE; |
| |
| /* various 802.11g modes */ |
| wlc->shortslot = FALSE; |
| wlc->shortslot_override = WLC_SHORTSLOT_AUTO; |
| |
| wlc->barker_overlap_control = TRUE; |
| wlc->barker_preamble = WLC_BARKER_SHORT_ALLOWED; |
| wlc->txburst_limit_override = AUTO; |
| |
| wlc_protection_upd(wlc, WLC_PROT_G_OVR, WLC_PROTECTION_AUTO); |
| wlc_protection_upd(wlc, WLC_PROT_G_SPEC, FALSE); |
| |
| wlc_protection_upd(wlc, WLC_PROT_N_CFG_OVR, WLC_PROTECTION_AUTO); |
| wlc_protection_upd(wlc, WLC_PROT_N_CFG, WLC_N_PROTECTION_OFF); |
| wlc_protection_upd(wlc, WLC_PROT_N_NONGF_OVR, WLC_PROTECTION_AUTO); |
| wlc_protection_upd(wlc, WLC_PROT_N_NONGF, FALSE); |
| wlc_protection_upd(wlc, WLC_PROT_N_PAM_OVR, AUTO); |
| |
| wlc_protection_upd(wlc, WLC_PROT_OVERLAP, WLC_PROTECTION_CTL_OVERLAP); |
| |
| /* 802.11g draft 4.0 NonERP elt advertisement */ |
| wlc->include_legacy_erp = TRUE; |
| |
| wlc->stf->ant_rx_ovr = ANT_RX_DIV_DEF; |
| wlc->stf->txant = ANT_TX_DEF; |
| |
| wlc->prb_resp_timeout = WLC_PRB_RESP_TIMEOUT; |
| |
| wlc->usr_fragthresh = DOT11_DEFAULT_FRAG_LEN; |
| for (i = 0; i < NFIFO; i++) |
| wlc->fragthresh[i] = DOT11_DEFAULT_FRAG_LEN; |
| wlc->RTSThresh = DOT11_DEFAULT_RTS_LEN; |
| |
| /* default rate fallback retry limits */ |
| wlc->SFBL = RETRY_SHORT_FB; |
| wlc->LFBL = RETRY_LONG_FB; |
| |
| /* default mac retry limits */ |
| wlc->SRL = RETRY_SHORT_DEF; |
| wlc->LRL = RETRY_LONG_DEF; |
| |
| /* init PM state */ |
| wlc->PM = PM_OFF; /* User's setting of PM mode through IOCTL */ |
| wlc->PM_override = FALSE; /* Prevents from going to PM if our AP is 'ill' */ |
| wlc->PMenabled = FALSE; /* Current PM state */ |
| wlc->PMpending = FALSE; /* Tracks whether STA indicated PM in the last attempt */ |
| wlc->PMblocked = FALSE; /* To allow blocking going into PM during RM and scans */ |
| |
| /* In WMM Auto mode, PM is allowed if association is a UAPSD association */ |
| wlc->WME_PM_blocked = FALSE; |
| |
| /* Init wme queuing method */ |
| wlc->wme_prec_queuing = FALSE; |
| |
| /* Overrides for the core to stay awake under zillion conditions Look for STAY_AWAKE */ |
| wlc->wake = FALSE; |
| /* Are we waiting for a response to PS-Poll that we sent */ |
| wlc->PSpoll = FALSE; |
| |
| /* APSD defaults */ |
| wlc->wme_apsd = TRUE; |
| wlc->apsd_sta_usp = FALSE; |
| wlc->apsd_trigger_timeout = 0; /* disable the trigger timer */ |
| wlc->apsd_trigger_ac = AC_BITMAP_ALL; |
| |
| /* Set flag to indicate that hw keys should be used when available. */ |
| wlc->wsec_swkeys = FALSE; |
| |
| /* init the 4 static WEP default keys */ |
| for (i = 0; i < WSEC_MAX_DEFAULT_KEYS; i++) { |
| wlc->wsec_keys[i] = wlc->wsec_def_keys[i]; |
| wlc->wsec_keys[i]->idx = (u8) i; |
| } |
| |
| wlc->_regulatory_domain = FALSE; /* 802.11d */ |
| |
| /* WME QoS mode is Auto by default */ |
| wlc->pub->_wme = AUTO; |
| |
| #ifdef BCMSDIODEV_ENABLED |
| wlc->pub->_priofc = TRUE; /* enable priority flow control for sdio dongle */ |
| #endif |
| |
| wlc->pub->_ampdu = AMPDU_AGG_HOST; |
| wlc->pub->bcmerror = 0; |
| wlc->ibss_allowed = TRUE; |
| wlc->ibss_coalesce_allowed = TRUE; |
| wlc->pub->_coex = ON; |
| |
| /* intialize mpc delay */ |
| wlc->mpc_delay_off = wlc->mpc_dlycnt = WLC_MPC_MIN_DELAYCNT; |
| |
| wlc->pr80838_war = TRUE; |
| } |
| |
| static bool wlc_state_bmac_sync(wlc_info_t *wlc) |
| { |
| wlc_bmac_state_t state_bmac; |
| |
| if (wlc_bmac_state_get(wlc->hw, &state_bmac) != 0) |
| return FALSE; |
| |
| wlc->machwcap = state_bmac.machwcap; |
| wlc_protection_upd(wlc, WLC_PROT_N_PAM_OVR, |
| (s8) state_bmac.preamble_ovr); |
| |
| return TRUE; |
| } |
| |
| static uint BCMATTACHFN(wlc_attach_module) (wlc_info_t *wlc) |
| { |
| uint err = 0; |
| uint unit; |
| unit = wlc->pub->unit; |
| |
| wlc->asi = wlc_antsel_attach(wlc, wlc->osh, wlc->pub, wlc->hw); |
| if (wlc->asi == NULL) { |
| WL_ERROR(("wl%d: wlc_attach: wlc_antsel_attach failed\n", |
| unit)); |
| err = 44; |
| goto fail; |
| } |
| |
| wlc->ampdu = wlc_ampdu_attach(wlc); |
| if (wlc->ampdu == NULL) { |
| WL_ERROR(("wl%d: wlc_attach: wlc_ampdu_attach failed\n", unit)); |
| err = 50; |
| goto fail; |
| } |
| |
| /* Initialize event queue; needed before following calls */ |
| wlc->eventq = |
| wlc_eventq_attach(wlc->pub, wlc, wlc->wl, wlc_process_eventq); |
| if (wlc->eventq == NULL) { |
| WL_ERROR(("wl%d: wlc_attach: wlc_eventq_attachfailed\n", unit)); |
| err = 57; |
| goto fail; |
| } |
| |
| if ((wlc_stf_attach(wlc) != 0)) { |
| WL_ERROR(("wl%d: wlc_attach: wlc_stf_attach failed\n", unit)); |
| err = 68; |
| goto fail; |
| } |
| fail: |
| return err; |
| } |
| |
| wlc_pub_t *wlc_pub(void *wlc) |
| { |
| return ((wlc_info_t *) wlc)->pub; |
| } |
| |
| #define CHIP_SUPPORTS_11N(wlc) 1 |
| |
| /* |
| * The common driver entry routine. Error codes should be unique |
| */ |
| void *BCMATTACHFN(wlc_attach) (void *wl, uint16 vendor, uint16 device, |
| uint unit, bool piomode, osl_t *osh, |
| void *regsva, uint bustype, void *btparam, |
| uint *perr) { |
| wlc_info_t *wlc; |
| uint err = 0; |
| uint j; |
| wlc_pub_t *pub; |
| wlc_txq_info_t *qi; |
| uint n_disabled; |
| |
| WL_NONE(("wl%d: %s: vendor 0x%x device 0x%x\n", unit, __func__, vendor, |
| device)); |
| |
| ASSERT(WSEC_MAX_RCMTA_KEYS <= WSEC_MAX_KEYS); |
| ASSERT(WSEC_MAX_DEFAULT_KEYS == WLC_DEFAULT_KEYS); |
| |
| /* some code depends on packed structures */ |
| ASSERT(sizeof(struct ether_addr) == ETHER_ADDR_LEN); |
| ASSERT(sizeof(struct ether_header) == ETHER_HDR_LEN); |
| ASSERT(sizeof(d11regs_t) == SI_CORE_SIZE); |
| ASSERT(sizeof(ofdm_phy_hdr_t) == D11_PHY_HDR_LEN); |
| ASSERT(sizeof(cck_phy_hdr_t) == D11_PHY_HDR_LEN); |
| ASSERT(sizeof(d11txh_t) == D11_TXH_LEN); |
| ASSERT(sizeof(d11rxhdr_t) == RXHDR_LEN); |
| ASSERT(sizeof(struct dot11_header) == DOT11_A4_HDR_LEN); |
| ASSERT(sizeof(struct dot11_rts_frame) == DOT11_RTS_LEN); |
| ASSERT(sizeof(struct dot11_management_header) == DOT11_MGMT_HDR_LEN); |
| ASSERT(sizeof(struct dot11_bcn_prb) == DOT11_BCN_PRB_LEN); |
| ASSERT(sizeof(tx_status_t) == TXSTATUS_LEN); |
| ASSERT(sizeof(ht_cap_ie_t) == HT_CAP_IE_LEN); |
| ASSERT(OFFSETOF(wl_scan_params_t, channel_list) == |
| WL_SCAN_PARAMS_FIXED_SIZE); |
| ASSERT(ISALIGNED(OFFSETOF(wsec_key_t, data), sizeof(uint32))); |
| ASSERT(ISPOWEROF2(MA_WINDOW_SZ)); |
| |
| ASSERT(sizeof(wlc_d11rxhdr_t) <= WL_HWRXOFF); |
| |
| /* |
| * Number of replay counters value used in WPA IE must match # rxivs |
| * supported in wsec_key_t struct. See 802.11i/D3.0 sect. 7.3.2.17 |
| * 'RSN Information Element' figure 8 for this mapping. |
| */ |
| ASSERT((WPA_CAP_16_REPLAY_CNTRS == WLC_REPLAY_CNTRS_VALUE |
| && 16 == WLC_NUMRXIVS) |
| || (WPA_CAP_4_REPLAY_CNTRS == WLC_REPLAY_CNTRS_VALUE |
| && 4 == WLC_NUMRXIVS)); |
| |
| /* allocate wlc_info_t state and its substructures */ |
| wlc = (wlc_info_t *) wlc_attach_malloc(osh, unit, &err, device); |
| if (wlc == NULL) |
| goto fail; |
| wlc->osh = osh; |
| pub = wlc->pub; |
| |
| #if defined(BCMDBG) |
| wlc_info_dbg = wlc; |
| #endif |
| |
| wlc->band = wlc->bandstate[0]; |
| wlc->core = wlc->corestate; |
| wlc->wl = wl; |
| pub->unit = unit; |
| pub->osh = osh; |
| wlc->btparam = btparam; |
| pub->_piomode = piomode; |
| wlc->bandinit_pending = FALSE; |
| /* By default restrict TKIP associations from 11n STA's */ |
| wlc->ht_wsec_restriction = WLC_HT_TKIP_RESTRICT; |
| |
| /* populate wlc_info_t with default values */ |
| wlc_info_init(wlc, unit); |
| |
| /* update sta/ap related parameters */ |
| wlc_ap_upd(wlc); |
| |
| /* 11n_disable nvram */ |
| n_disabled = getintvar(pub->vars, "11n_disable"); |
| |
| /* register a module (to handle iovars) */ |
| wlc_module_register(wlc->pub, wlc_iovars, "wlc_iovars", wlc, |
| wlc_doiovar, NULL, NULL); |
| |
| /* low level attach steps(all hw accesses go inside, no more in rest of the attach) */ |
| err = wlc_bmac_attach(wlc, vendor, device, unit, piomode, osh, regsva, |
| bustype, btparam); |
| if (err) |
| goto fail; |
| |
| /* for some states, due to different info pointer(e,g, wlc, wlc_hw) or master/slave split, |
| * HIGH driver(both monolithic and HIGH_ONLY) needs to sync states FROM BMAC portion driver |
| */ |
| if (!wlc_state_bmac_sync(wlc)) { |
| err = 20; |
| goto fail; |
| } |
| |
| pub->phy_11ncapable = WLC_PHY_11N_CAP(wlc->band); |
| |
| /* propagate *vars* from BMAC driver to high driver */ |
| wlc_bmac_copyfrom_vars(wlc->hw, &pub->vars, &wlc->vars_size); |
| |
| #ifdef WLC_HIGH_ONLY |
| WL_TRACE(("nvram : vars %p , vars_size %d\n", pub->vars, |
| wlc->vars_size)); |
| #endif |
| |
| /* set maximum allowed duty cycle */ |
| wlc->tx_duty_cycle_ofdm = |
| (uint16) getintvar(pub->vars, "tx_duty_cycle_ofdm"); |
| wlc->tx_duty_cycle_cck = |
| (uint16) getintvar(pub->vars, "tx_duty_cycle_cck"); |
| |
| wlc_stf_phy_chain_calc(wlc); |
| |
| /* txchain 1: txant 0, txchain 2: txant 1 */ |
| if (WLCISNPHY(wlc->band) && (wlc->stf->txstreams == 1)) |
| wlc->stf->txant = wlc->stf->hw_txchain - 1; |
| |
| /* push to BMAC driver */ |
| wlc_phy_stf_chain_init(wlc->band->pi, wlc->stf->hw_txchain, |
| wlc->stf->hw_rxchain); |
| |
| #ifdef WLC_LOW |
| /* pull up some info resulting from the low attach */ |
| { |
| int i; |
| for (i = 0; i < NFIFO; i++) |
| wlc->core->txavail[i] = wlc->hw->txavail[i]; |
| } |
| #endif /* WLC_LOW */ |
| |
| wlc_bmac_hw_etheraddr(wlc->hw, &wlc->perm_etheraddr); |
| |
| bcopy((char *)&wlc->perm_etheraddr, (char *)&pub->cur_etheraddr, |
| ETHER_ADDR_LEN); |
| |
| for (j = 0; j < NBANDS(wlc); j++) { |
| /* Use band 1 for single band 11a */ |
| if (IS_SINGLEBAND_5G(wlc->deviceid)) |
| j = BAND_5G_INDEX; |
| |
| wlc->band = wlc->bandstate[j]; |
| |
| if (!wlc_attach_stf_ant_init(wlc)) { |
| err = 24; |
| goto fail; |
| } |
| |
| /* default contention windows size limits */ |
| wlc->band->CWmin = APHY_CWMIN; |
| wlc->band->CWmax = PHY_CWMAX; |
| |
| /* init gmode value */ |
| if (BAND_2G(wlc->band->bandtype)) { |
| wlc->band->gmode = GMODE_AUTO; |
| wlc_protection_upd(wlc, WLC_PROT_G_USER, |
| wlc->band->gmode); |
| } |
| |
| /* init _n_enab supported mode */ |
| if (WLC_PHY_11N_CAP(wlc->band) && CHIP_SUPPORTS_11N(wlc)) { |
| if (n_disabled & WLFEATURE_DISABLE_11N) { |
| pub->_n_enab = OFF; |
| wlc_protection_upd(wlc, WLC_PROT_N_USER, OFF); |
| } else { |
| pub->_n_enab = SUPPORT_11N; |
| wlc_protection_upd(wlc, WLC_PROT_N_USER, |
| ((pub->_n_enab == |
| SUPPORT_11N) ? WL_11N_2x2 : |
| WL_11N_3x3)); |
| } |
| } |
| |
| /* init per-band default rateset, depend on band->gmode */ |
| wlc_default_rateset(wlc, &wlc->band->defrateset); |
| |
| /* fill in hw_rateset (used early by WLC_SET_RATESET) */ |
| wlc_rateset_filter(&wlc->band->defrateset, |
| &wlc->band->hw_rateset, FALSE, |
| WLC_RATES_CCK_OFDM, RATE_MASK, |
| (bool) N_ENAB(wlc->pub)); |
| } |
| |
| /* update antenna config due to wlc->stf->txant/txchain/ant_rx_ovr change */ |
| wlc_stf_phy_txant_upd(wlc); |
| |
| /* attach each modules */ |
| err = wlc_attach_module(wlc); |
| if (err != 0) |
| goto fail; |
| |
| if (!wlc_timers_init(wlc, unit)) { |
| WL_ERROR(("wl%d: %s: wlc_init_timer failed\n", unit, __func__)); |
| err = 32; |
| goto fail; |
| } |
| |
| /* depend on rateset, gmode */ |
| wlc->cmi = wlc_channel_mgr_attach(wlc); |
| if (!wlc->cmi) { |
| WL_ERROR(("wl%d: %s: wlc_channel_mgr_attach failed\n", unit, |
| __func__)); |
| err = 33; |
| goto fail; |
| } |
| |
| /* init default when all parameters are ready, i.e. ->rateset */ |
| wlc_bss_default_init(wlc); |
| |
| /* |
| * Complete the wlc default state initializations.. |
| */ |
| |
| /* allocate our initial queue */ |
| qi = wlc_txq_alloc(wlc, osh); |
| if (qi == NULL) { |
| WL_ERROR(("wl%d: %s: failed to malloc tx queue\n", unit, |
| __func__)); |
| err = 100; |
| goto fail; |
| } |
| wlc->active_queue = qi; |
| |
| wlc->bsscfg[0] = wlc->cfg; |
| wlc->cfg->_idx = 0; |
| wlc->cfg->wlc = wlc; |
| pub->txmaxpkts = MAXTXPKTS; |
| |
| WLCNTSET(pub->_cnt->version, WL_CNT_T_VERSION); |
| WLCNTSET(pub->_cnt->length, sizeof(wl_cnt_t)); |
| |
| WLCNTSET(pub->_wme_cnt->version, WL_WME_CNT_VERSION); |
| WLCNTSET(pub->_wme_cnt->length, sizeof(wl_wme_cnt_t)); |
| |
| wlc_wme_initparams_sta(wlc, &wlc->wme_param_ie); |
| |
| wlc->mimoft = FT_HT; |
| wlc->ht_cap.cap = HT_CAP; |
| if (HT_ENAB(wlc->pub)) |
| wlc->stf->ldpc = AUTO; |
| |
| wlc->mimo_40txbw = AUTO; |
| wlc->ofdm_40txbw = AUTO; |
| wlc->cck_40txbw = AUTO; |
| wlc_update_mimo_band_bwcap(wlc, WLC_N_BW_20IN2G_40IN5G); |
| |
| /* Enable setting the RIFS Mode bit by default in HT Info IE */ |
| wlc->rifs_advert = AUTO; |
| |
| /* Set default values of SGI */ |
| if (WLC_SGI_CAP_PHY(wlc)) { |
| wlc_ht_update_sgi_rx(wlc, (WLC_N_SGI_20 | WLC_N_SGI_40)); |
| wlc->sgi_tx = AUTO; |
| } else if (WLCISSSLPNPHY(wlc->band)) { |
| wlc_ht_update_sgi_rx(wlc, (WLC_N_SGI_20 | WLC_N_SGI_40)); |
| wlc->sgi_tx = AUTO; |
| } else { |
| wlc_ht_update_sgi_rx(wlc, 0); |
| wlc->sgi_tx = OFF; |
| } |
| |
| /* *******nvram 11n config overrides Start ********* */ |
| |
| /* apply the sgi override from nvram conf */ |
| if (n_disabled & WLFEATURE_DISABLE_11N_SGI_TX) |
| wlc->sgi_tx = OFF; |
| |
| if (n_disabled & WLFEATURE_DISABLE_11N_SGI_RX) |
| wlc_ht_update_sgi_rx(wlc, 0); |
| |
| /* apply the stbc override from nvram conf */ |
| if (n_disabled & WLFEATURE_DISABLE_11N_STBC_TX) { |
| wlc->bandstate[BAND_2G_INDEX]->band_stf_stbc_tx = OFF; |
| wlc->bandstate[BAND_5G_INDEX]->band_stf_stbc_tx = OFF; |
| wlc->ht_cap.cap &= ~HT_CAP_TX_STBC; |
| } |
| if (n_disabled & WLFEATURE_DISABLE_11N_STBC_RX) |
| wlc_stf_stbc_rx_set(wlc, HT_CAP_RX_STBC_NO); |
| |
| /* apply the GF override from nvram conf */ |
| if (n_disabled & WLFEATURE_DISABLE_11N_GF) |
| wlc->ht_cap.cap &= ~HT_CAP_GF; |
| |
| /* initialize radio_mpc_disable according to wlc->mpc */ |
| wlc_radio_mpc_upd(wlc); |
| |
| if (WLANTSEL_ENAB(wlc)) { |
| if ((CHIPID(wlc->pub->sih->chip)) == BCM43235_CHIP_ID) { |
| if ((getintvar(wlc->pub->vars, "aa2g") == 7) || |
| (getintvar(wlc->pub->vars, "aa5g") == 7)) { |
| wlc_bmac_antsel_set(wlc->hw, 1); |
| } |
| } else { |
| wlc_bmac_antsel_set(wlc->hw, wlc->asi->antsel_avail); |
| } |
| } |
| |
| if (perr) |
| *perr = 0; |
| |
| return (void *)wlc; |
| |
| fail: |
| WL_ERROR(("wl%d: %s: failed with err %d\n", unit, __func__, err)); |
| if (wlc) |
| wlc_detach(wlc); |
| |
| if (perr) |
| *perr = err; |
| return NULL; |
| } |
| |
| static void BCMNMIATTACHFN(wlc_attach_antgain_init) (wlc_info_t *wlc) |
| { |
| uint unit; |
| unit = wlc->pub->unit; |
| |
| if ((wlc->band->antgain == -1) && (wlc->pub->sromrev == 1)) { |
| /* default antenna gain for srom rev 1 is 2 dBm (8 qdbm) */ |
| wlc->band->antgain = 8; |
| } else if (wlc->band->antgain == -1) { |
| WL_ERROR(("wl%d: %s: Invalid antennas available in srom, using 2dB\n", unit, __func__)); |
| wlc->band->antgain = 8; |
| } else { |
| s8 gain, fract; |
| /* Older sroms specified gain in whole dbm only. In order |
| * be able to specify qdbm granularity and remain backward compatible |
| * the whole dbms are now encoded in only low 6 bits and remaining qdbms |
| * are encoded in the hi 2 bits. 6 bit signed number ranges from |
| * -32 - 31. Examples: 0x1 = 1 db, |
| * 0xc1 = 1.75 db (1 + 3 quarters), |
| * 0x3f = -1 (-1 + 0 quarters), |
| * 0x7f = -.75 (-1 in low 6 bits + 1 quarters in hi 2 bits) = -3 qdbm. |
| * 0xbf = -.50 (-1 in low 6 bits + 2 quarters in hi 2 bits) = -2 qdbm. |
| */ |
| gain = wlc->band->antgain & 0x3f; |
| gain <<= 2; /* Sign extend */ |
| gain >>= 2; |
| fract = (wlc->band->antgain & 0xc0) >> 6; |
| wlc->band->antgain = 4 * gain + fract; |
| } |
| } |
| |
| static bool BCMATTACHFN(wlc_attach_stf_ant_init) (wlc_info_t *wlc) |
| { |
| int aa; |
| uint unit; |
| char *vars; |
| int bandtype; |
| |
| unit = wlc->pub->unit; |
| vars = wlc->pub->vars; |
| bandtype = wlc->band->bandtype; |
| |
| /* get antennas available */ |
| aa = (s8) getintvar(vars, (BAND_5G(bandtype) ? "aa5g" : "aa2g")); |
| if (aa == 0) |
| aa = (s8) getintvar(vars, |
| (BAND_5G(bandtype) ? "aa1" : "aa0")); |
| if ((aa < 1) || (aa > 15)) { |
| WL_ERROR(("wl%d: %s: Invalid antennas available in srom (0x%x), using 3.\n", unit, __func__, aa)); |
| aa = 3; |
| } |
| |
| /* reset the defaults if we have a single antenna */ |
| if (aa == 1) { |
| wlc->stf->ant_rx_ovr = ANT_RX_DIV_FORCE_0; |
| wlc->stf->txant = ANT_TX_FORCE_0; |
| } else if (aa == 2) { |
| wlc->stf->ant_rx_ovr = ANT_RX_DIV_FORCE_1; |
| wlc->stf->txant = ANT_TX_FORCE_1; |
| } else { |
| } |
| |
| /* Compute Antenna Gain */ |
| wlc->band->antgain = |
| (s8) getintvar(vars, (BAND_5G(bandtype) ? "ag1" : "ag0")); |
| wlc_attach_antgain_init(wlc); |
| |
| return TRUE; |
| } |
| |
| #ifdef WLC_HIGH_ONLY |
| /* HIGH_ONLY bmac_attach, which sync over LOW_ONLY bmac_attach states */ |
| int |
| BCMATTACHFN(wlc_bmac_attach) (wlc_info_t *wlc, uint16 vendor, uint16 device, |
| uint unit, bool piomode, osl_t *osh, |
| void *regsva, uint bustype, void *btparam) { |
| wlc_bmac_revinfo_t revinfo; |
| uint idx = 0; |
| rpc_info_t *rpc = (rpc_info_t *) btparam; |
| |
| ASSERT(bustype == RPC_BUS); |
| |
| /* install the rpc handle in the various state structures used by stub RPC functions */ |
| wlc->rpc = rpc; |
| wlc->hw->rpc = rpc; |
| wlc->hw->osh = osh; |
| |
| wlc->regs = 0; |
| |
| wlc->rpctx = wlc_rpctx_attach(wlc->pub, wlc); |
| if (wlc->rpctx == NULL) |
| return -1; |
| |
| /* |
| * FIFO 0 |
| * TX: TX_AC_BK_FIFO (TX AC Background data packets) |
| */ |
| /* Always initialized */ |
| ASSERT(NRPCTXBUFPOST <= NTXD); |
| wlc_rpctx_fifoinit(wlc->rpctx, TX_DATA_FIFO, NRPCTXBUFPOST); |
| wlc_rpctx_fifoinit(wlc->rpctx, TX_CTL_FIFO, NRPCTXBUFPOST); |
| wlc_rpctx_fifoinit(wlc->rpctx, TX_BCMC_FIFO, NRPCTXBUFPOST); |
| |
| /* VI and BK inited only if WME */ |
| if (WME_ENAB(wlc->pub)) { |
| wlc_rpctx_fifoinit(wlc->rpctx, TX_AC_BK_FIFO, NRPCTXBUFPOST); |
| wlc_rpctx_fifoinit(wlc->rpctx, TX_AC_VI_FIFO, NRPCTXBUFPOST); |
| } |
| |
| /* Allocate SB handle */ |
| wlc->pub->sih = osl_malloc(wlc->osh, sizeof(si_t)); |
| if (!wlc->pub->sih) |
| return -1; |
| bzero(wlc->pub->sih, sizeof(si_t)); |
| |
| /* sync up revinfo with BMAC */ |
| bzero(&revinfo, sizeof(wlc_bmac_revinfo_t)); |
| if (wlc_bmac_revinfo_get(wlc->hw, &revinfo) != 0) |
| return -1; |
| wlc->vendorid = (uint16) revinfo.vendorid; |
| wlc->deviceid = (uint16) revinfo.deviceid; |
| |
| wlc->pub->boardrev = (uint16) revinfo.boardrev; |
| wlc->pub->corerev = revinfo.corerev; |
| wlc->pub->sromrev = (u8) revinfo.sromrev; |
| wlc->pub->sih->chiprev = revinfo.chiprev; |
| wlc->pub->sih->chip = revinfo.chip; |
| wlc->pub->sih->chippkg = revinfo.chippkg; |
| wlc->pub->sih->boardtype = revinfo.boardtype; |
| wlc->pub->sih->boardvendor = revinfo.boardvendor; |
| wlc->pub->sih->bustype = revinfo.bustype; |
| wlc->pub->sih->buscoretype = revinfo.buscoretype; |
| wlc->pub->sih->buscorerev = revinfo.buscorerev; |
| wlc->pub->sih->issim = (bool) revinfo.issim; |
| wlc->pub->sih->rpc = rpc; |
| |
| if (revinfo.nbands == 0 || revinfo.nbands > 2) |
| return -1; |
| wlc->pub->_nbands = revinfo.nbands; |
| |
| for (idx = 0; idx < wlc->pub->_nbands; idx++) { |
| uint bandunit, bandtype; /* To access bandstate */ |
| wlc_phy_t *pi = osl_malloc(wlc->osh, sizeof(wlc_phy_t)); |
| |
| if (!pi) |
| return -1; |
| bzero(pi, sizeof(wlc_phy_t)); |
| pi->rpc = rpc; |
| |
| bandunit = revinfo.band[idx].bandunit; |
| bandtype = revinfo.band[idx].bandtype; |
| wlc->bandstate[bandunit]->radiorev = |
| (u8) revinfo.band[idx].radiorev; |
| wlc->bandstate[bandunit]->phytype = |
| (uint16) revinfo.band[idx].phytype; |
| wlc->bandstate[bandunit]->phyrev = |
| (uint16) revinfo.band[idx].phyrev; |
| wlc->bandstate[bandunit]->radioid = |
| (uint16) revinfo.band[idx].radioid; |
| wlc->bandstate[bandunit]->abgphy_encore = |
| revinfo.band[idx].abgphy_encore; |
| |
| wlc->bandstate[bandunit]->pi = pi; |
| wlc->bandstate[bandunit]->bandunit = bandunit; |
| wlc->bandstate[bandunit]->bandtype = bandtype; |
| } |
| |
| /* misc stuff */ |
| |
| return 0; |
| } |
| |
| /* Free the convenience handles */ |
| int wlc_bmac_detach(wlc_info_t *wlc) |
| { |
| uint idx; |
| |
| if (wlc->pub->sih) { |
| osl_mfree(wlc->osh, (void *)wlc->pub->sih, sizeof(si_t)); |
| wlc->pub->sih = NULL; |
| } |
| |
| for (idx = 0; idx < MAXBANDS; idx++) |
| if (wlc->bandstate[idx]->pi) { |
| osl_mfree(wlc->osh, wlc->bandstate[idx]->pi, |
| sizeof(wlc_phy_t)); |
| wlc->bandstate[idx]->pi = NULL; |
| } |
| |
| if (wlc->rpctx) { |
| wlc_rpctx_detach(wlc->rpctx); |
| wlc->rpctx = NULL; |
| } |
| |
| return 0; |
| |
| } |
| |
| #endif /* WLC_HIGH_ONLY */ |
| |
| static void BCMATTACHFN(wlc_timers_deinit) (wlc_info_t *wlc) |
| { |
| /* free timer state */ |
| if (wlc->wdtimer) { |
| wl_free_timer(wlc->wl, wlc->wdtimer); |
| wlc->wdtimer = NULL; |
| } |
| if (wlc->radio_timer) { |
| wl_free_timer(wlc->wl, wlc->radio_timer); |
| wlc->radio_timer = NULL; |
| } |
| } |
| |
| static void BCMATTACHFN(wlc_detach_module) (wlc_info_t *wlc) |
| { |
| if (wlc->asi) { |
| wlc_antsel_detach(wlc->asi); |
| wlc->asi = NULL; |
| } |
| |
| if (wlc->ampdu) { |
| wlc_ampdu_detach(wlc->ampdu); |
| wlc->ampdu = NULL; |
| } |
| |
| wlc_stf_detach(wlc); |
| } |
| |
| /* |
| * Return a count of the number of driver callbacks still pending. |
| * |
| * General policy is that wlc_detach can only dealloc/free software states. It can NOT |
| * touch hardware registers since the d11core may be in reset and clock may not be available. |
| * One exception is sb register access, which is possible if crystal is turned on |
| * After "down" state, driver should avoid software timer with the exception of radio_monitor. |
| */ |
| uint BCMATTACHFN(wlc_detach) (wlc_info_t *wlc) |
| { |
| uint i; |
| uint callbacks = 0; |
| |
| if (wlc == NULL) |
| return 0; |
| |
| WL_TRACE(("wl%d: %s\n", wlc->pub->unit, __func__)); |
| |
| ASSERT(!wlc->pub->up); |
| |
| callbacks += wlc_bmac_detach(wlc); |
| |
| /* delete software timers */ |
| if (!wlc_radio_monitor_stop(wlc)) |
| callbacks++; |
| |
| if (wlc->eventq) { |
| wlc_eventq_detach(wlc->eventq); |
| wlc->eventq = NULL; |
| } |
| |
| wlc_channel_mgr_detach(wlc->cmi); |
| |
| wlc_timers_deinit(wlc); |
| |
| wlc_detach_module(wlc); |
| |
| /* free other state */ |
| |
| #ifdef WLC_HIGH_ONLY |
| /* High-Only driver has an allocated copy of vars, monolithic just |
| * references the wlc->hw->vars which is freed in wlc_bmac_detach() |
| */ |
| if (wlc->pub->vars) { |
| osl_mfree(wlc->osh, wlc->pub->vars, wlc->vars_size); |
| wlc->pub->vars = NULL; |
| } |
| #endif |
| |
| #ifdef BCMDBG |
| if (wlc->country_ie_override) { |
| osl_mfree(wlc->osh, wlc->country_ie_override, |
| wlc->country_ie_override->len + TLV_HDR_LEN); |
| wlc->country_ie_override = NULL; |
| } |
| #endif /* BCMDBG */ |
| |
| { |
| /* free dumpcb list */ |
| dumpcb_t *prev, *ptr; |
| prev = ptr = wlc->dumpcb_head; |
| while (ptr) { |
| ptr = prev->next; |
| osl_mfree(wlc->osh, prev, sizeof(dumpcb_t)); |
| prev = ptr; |
| } |
| wlc->dumpcb_head = NULL; |
| } |
| |
| /* Detach from iovar manager */ |
| wlc_module_unregister(wlc->pub, "wlc_iovars", wlc); |
| |
| /* |
| if (wlc->ap) { |
| wlc_ap_detach(wlc->ap); |
| wlc->ap = NULL; |
| } |
| */ |
| |
| while (wlc->tx_queues != NULL) { |
| wlc_txq_free(wlc, wlc->osh, wlc->tx_queues); |
| } |
| |
| /* |
| * consistency check: wlc_module_register/wlc_module_unregister calls |
| * should match therefore nothing should be left here. |
| */ |
| for (i = 0; i < WLC_MAXMODULES; i++) |
| ASSERT(wlc->modulecb[i].name[0] == '\0'); |
| |
| wlc_detach_mfree(wlc, wlc->osh); |
| return callbacks; |
| } |
| |
| /* update state that depends on the current value of "ap" */ |
| void wlc_ap_upd(wlc_info_t *wlc) |
| { |
| if (AP_ENAB(wlc->pub)) |
| wlc->PLCPHdr_override = WLC_PLCP_AUTO; /* AP: short not allowed, but not enforced */ |
| else |
| wlc->PLCPHdr_override = WLC_PLCP_SHORT; /* STA-BSS; short capable */ |
| |
| /* disable vlan_mode on AP since some legacy STAs cannot rx tagged pkts */ |
| wlc->vlan_mode = AP_ENAB(wlc->pub) ? OFF : AUTO; |
| |
| /* fixup mpc */ |
| wlc->mpc = TRUE; |
| } |
| |
| /* read hwdisable state and propagate to wlc flag */ |
| static void wlc_radio_hwdisable_upd(wlc_info_t *wlc) |
| { |
| if (wlc->pub->wlfeatureflag & WL_SWFL_NOHWRADIO || wlc->pub->hw_off) |
| return; |
| |
| if (wlc_bmac_radio_read_hwdisabled(wlc->hw)) { |
| mboolset(wlc->pub->radio_disabled, WL_RADIO_HW_DISABLE); |
| } else { |
| mboolclr(wlc->pub->radio_disabled, WL_RADIO_HW_DISABLE); |
| } |
| } |
| |
| /* return TRUE if Minimum Power Consumption should be entered, FALSE otherwise */ |
| bool wlc_is_non_delay_mpc(wlc_info_t *wlc) |
| { |
| return FALSE; |
| } |
| |
| bool wlc_ismpc(wlc_info_t *wlc) |
| { |
| return (wlc->mpc_delay_off == 0) && (wlc_is_non_delay_mpc(wlc)); |
| } |
| |
| void wlc_radio_mpc_upd(wlc_info_t *wlc) |
| { |
| bool mpc_radio, radio_state; |
| |
| /* |
| * Clear the WL_RADIO_MPC_DISABLE bit when mpc feature is disabled |
| * in case the WL_RADIO_MPC_DISABLE bit was set. Stop the radio |
| * monitor also when WL_RADIO_MPC_DISABLE is the only reason that |
| * the radio is going down. |
| */ |
| if (!wlc->mpc) { |
| if (!wlc->pub->radio_disabled) |
| return; |
| mboolclr(wlc->pub->radio_disabled, WL_RADIO_MPC_DISABLE); |
| wlc_radio_upd(wlc); |
| if (!wlc->pub->radio_disabled) |
| wlc_radio_monitor_stop(wlc); |
| return; |
| } |
| |
| /* |
| * sync ismpc logic with WL_RADIO_MPC_DISABLE bit in wlc->pub->radio_disabled |
| * to go ON, always call radio_upd synchronously |
| * to go OFF, postpone radio_upd to later when context is safe(e.g. watchdog) |
| */ |
| radio_state = |
| (mboolisset(wlc->pub->radio_disabled, WL_RADIO_MPC_DISABLE) ? OFF : |
| ON); |
| mpc_radio = (wlc_ismpc(wlc) == TRUE) ? OFF : ON; |
| |
| if (radio_state == ON && mpc_radio == OFF) |
| wlc->mpc_delay_off = wlc->mpc_dlycnt; |
| else if (radio_state == OFF && mpc_radio == ON) { |
| mboolclr(wlc->pub->radio_disabled, WL_RADIO_MPC_DISABLE); |
| wlc_radio_upd(wlc); |
| if (wlc->mpc_offcnt < WLC_MPC_THRESHOLD) { |
| wlc->mpc_dlycnt = WLC_MPC_MAX_DELAYCNT; |
| } else |
| wlc->mpc_dlycnt = WLC_MPC_MIN_DELAYCNT; |
| wlc->mpc_dur += OSL_SYSUPTIME() - wlc->mpc_laston_ts; |
| } |
| /* Below logic is meant to capture the transition from mpc off to mpc on for reasons |
| * other than wlc->mpc_delay_off keeping the mpc off. In that case reset |
| * wlc->mpc_delay_off to wlc->mpc_dlycnt, so that we restart the countdown of mpc_delay_off |
| */ |
| if ((wlc->prev_non_delay_mpc == FALSE) && |
| (wlc_is_non_delay_mpc(wlc) == TRUE) && wlc->mpc_delay_off) { |
| wlc->mpc_delay_off = wlc->mpc_dlycnt; |
| } |
| wlc->prev_non_delay_mpc = wlc_is_non_delay_mpc(wlc); |
| } |
| |
| /* |
| * centralized radio disable/enable function, |
| * invoke radio enable/disable after updating hwradio status |
| */ |
| static void wlc_radio_upd(wlc_info_t *wlc) |
| { |
| if (wlc->pub->radio_disabled) |
| wlc_radio_disable(wlc); |
| else |
| wlc_radio_enable(wlc); |
| } |
| |
| /* maintain LED behavior in down state */ |
| static void wlc_down_led_upd(wlc_info_t *wlc) |
| { |
| ASSERT(!wlc->pub->up); |
| |
| /* maintain LEDs while in down state, turn on sbclk if not available yet */ |
| /* turn on sbclk if necessary */ |
| if (!AP_ENAB(wlc->pub)) { |
| wlc_pllreq(wlc, TRUE, WLC_PLLREQ_FLIP); |
| |
| wlc_pllreq(wlc, FALSE, WLC_PLLREQ_FLIP); |
| } |
| } |
| |
| void wlc_radio_disable(wlc_info_t *wlc) |
| { |
| if (!wlc->pub->up) { |
| wlc_down_led_upd(wlc); |
| return; |
| } |
| |
| wlc_radio_monitor_start(wlc); |
| wl_down(wlc->wl); |
| } |
| |
| static void wlc_radio_enable(wlc_info_t *wlc) |
| { |
| if (wlc->pub->up) |
| return; |
| |
| if (DEVICEREMOVED(wlc)) |
| return; |
| |
| if (!wlc->down_override) { /* imposed by wl down/out ioctl */ |
| wl_up(wlc->wl); |
| } |
| } |
| |
| /* periodical query hw radio button while driver is "down" */ |
| static void wlc_radio_timer(void *arg) |
| { |
| wlc_info_t *wlc = (wlc_info_t *) arg; |
| |
| if (DEVICEREMOVED(wlc)) { |
| WL_ERROR(("wl%d: %s: dead chip\n", wlc->pub->unit, __func__)); |
| wl_down(wlc->wl); |
| return; |
| } |
| |
| /* cap mpc off count */ |
| if (wlc->mpc_offcnt < WLC_MPC_MAX_DELAYCNT) |
| wlc->mpc_offcnt++; |
| |
| /* validate all the reasons driver could be down and running this radio_timer */ |
| ASSERT(wlc->pub->radio_disabled || wlc->down_override); |
| wlc_radio_hwdisable_upd(wlc); |
| wlc_radio_upd(wlc); |
| } |
| |
| static bool wlc_radio_monitor_start(wlc_info_t *wlc) |
| { |
| /* Don't start the timer if HWRADIO feature is disabled */ |
| if (wlc->radio_monitor || (wlc->pub->wlfeatureflag & WL_SWFL_NOHWRADIO)) |
| return TRUE; |
| |
| wlc->radio_monitor = TRUE; |
| wlc_pllreq(wlc, TRUE, WLC_PLLREQ_RADIO_MON); |
| wl_add_timer(wlc->wl, wlc->radio_timer, TIMER_INTERVAL_RADIOCHK, TRUE); |
| return TRUE; |
| } |
| |
| bool wlc_radio_monitor_stop(wlc_info_t *wlc) |
| { |
| if (!wlc->radio_monitor) |
| return TRUE; |
| |
| ASSERT((wlc->pub->wlfeatureflag & WL_SWFL_NOHWRADIO) != |
| WL_SWFL_NOHWRADIO); |
| |
| wlc->radio_monitor = FALSE; |
| wlc_pllreq(wlc, FALSE, WLC_PLLREQ_RADIO_MON); |
| return wl_del_timer(wlc->wl, wlc->radio_timer); |
| } |
| |
| /* bring the driver down, but don't reset hardware */ |
| void wlc_out(wlc_info_t *wlc) |
| { |
| wlc_bmac_set_noreset(wlc->hw, TRUE); |
| wlc_radio_upd(wlc); |
| wl_down(wlc->wl); |
| wlc_bmac_set_noreset(wlc->hw, FALSE); |
| |
| /* core clk is TRUE in BMAC driver due to noreset, need to mirror it in HIGH */ |
| wlc->clk = TRUE; |
| |
| /* This will make sure that when 'up' is done |
| * after 'out' it'll restore hardware (especially gpios) |
| */ |
| wlc->pub->hw_up = FALSE; |
| } |
| |
| #if defined(BCMDBG) |
| /* Verify the sanity of wlc->tx_prec_map. This can be done only by making sure that |
| * if there is no packet pending for the FIFO, then the corresponding prec bits should be set |
| * in prec_map. Of course, ignore this rule when block_datafifo is set |
| */ |
| static bool wlc_tx_prec_map_verify(wlc_info_t *wlc) |
| { |
| /* For non-WME, both fifos have overlapping prec_map. So it's an error only if both |
| * fail the check. |
| */ |
| if (!EDCF_ENAB(wlc->pub)) { |
| if (!(WLC_TX_FIFO_CHECK(wlc, TX_DATA_FIFO) || |
| WLC_TX_FIFO_CHECK(wlc, TX_CTL_FIFO))) |
| return FALSE; |
| else |
| return TRUE; |
| } |
| |
| return WLC_TX_FIFO_CHECK(wlc, TX_AC_BK_FIFO) |
| && WLC_TX_FIFO_CHECK(wlc, TX_AC_BE_FIFO) |
| && WLC_TX_FIFO_CHECK(wlc, TX_AC_VI_FIFO) |
| && WLC_TX_FIFO_CHECK(wlc, TX_AC_VO_FIFO); |
| } |
| #endif /* BCMDBG */ |
| |
| static void wlc_watchdog_by_timer(void *arg) |
| { |
| wlc_info_t *wlc = (wlc_info_t *) arg; |
| wlc_watchdog(arg); |
| if (WLC_WATCHDOG_TBTT(wlc)) { |
| /* set to normal osl watchdog period */ |
| wl_del_timer(wlc->wl, wlc->wdtimer); |
| wl_add_timer(wlc->wl, wlc->wdtimer, TIMER_INTERVAL_WATCHDOG, |
| TRUE); |
| } |
| } |
| |
| /* common watchdog code */ |
| static void wlc_watchdog(void *arg) |
| { |
| wlc_info_t *wlc = (wlc_info_t *) arg; |
| int i; |
| wlc_bsscfg_t *cfg; |
| |
| WL_TRACE(("wl%d: wlc_watchdog\n", wlc->pub->unit)); |
| |
| if (!wlc->pub->up) |
| return; |
| |
| if (DEVICEREMOVED(wlc)) { |
| WL_ERROR(("wl%d: %s: dead chip\n", wlc->pub->unit, __func__)); |
| wl_down(wlc->wl); |
| return; |
| } |
| |
| /* increment second count */ |
| wlc->pub->now++; |
| |
| /* delay radio disable */ |
| if (wlc->mpc_delay_off) { |
| if (--wlc->mpc_delay_off == 0) { |
| mboolset(wlc->pub->radio_disabled, |
| WL_RADIO_MPC_DISABLE); |
| if (wlc->mpc && wlc_ismpc(wlc)) |
| wlc->mpc_offcnt = 0; |
| wlc->mpc_laston_ts = OSL_SYSUPTIME(); |
| } |
| } |
| |
| /* mpc sync */ |
| wlc_radio_mpc_upd(wlc); |
| /* radio sync: sw/hw/mpc --> radio_disable/radio_enable */ |
| wlc_radio_hwdisable_upd(wlc); |
| wlc_radio_upd(wlc); |
| /* if ismpc, driver should be in down state if up/down is allowed */ |
| if (wlc->mpc && wlc_ismpc(wlc)) |
| ASSERT(!wlc->pub->up); |
| /* if radio is disable, driver may be down, quit here */ |
| if (wlc->pub->radio_disabled) |
| return; |
| |
| #ifdef WLC_LOW |
| wlc_bmac_watchdog(wlc); |
| #endif |
| #ifdef WLC_HIGH_ONLY |
| /* maintenance */ |
| wlc_bmac_rpc_watchdog(wlc); |
| #endif |
| |
| /* occasionally sample mac stat counters to detect 16-bit counter wrap */ |
| if ((WLC_UPDATE_STATS(wlc)) |
| && (!(wlc->pub->now % SW_TIMER_MAC_STAT_UPD))) |
| wlc_statsupd(wlc); |
| |
| /* Manage TKIP countermeasures timers */ |
| FOREACH_BSS(wlc, i, cfg) { |
| if (cfg->tk_cm_dt) { |
| cfg->tk_cm_dt--; |
| } |
| if (cfg->tk_cm_bt) { |
| cfg->tk_cm_bt--; |
| } |
| } |
| |
| /* Call any registered watchdog handlers */ |
| for (i = 0; i < WLC_MAXMODULES; i++) { |
| if (wlc->modulecb[i].watchdog_fn) |
| wlc->modulecb[i].watchdog_fn(wlc->modulecb[i].hdl); |
| } |
| |
| if (WLCISNPHY(wlc->band) && !wlc->pub->tempsense_disable && |
| ((wlc->pub->now - wlc->tempsense_lasttime) >= |
| WLC_TEMPSENSE_PERIOD)) { |
| wlc->tempsense_lasttime = wlc->pub->now; |
| wlc_tempsense_upd(wlc); |
| } |
| #ifdef WLC_LOW |
| /* BMAC_NOTE: for HIGH_ONLY driver, this seems being called after RPC bus failed */ |
| ASSERT(wlc_bmac_taclear(wlc->hw, TRUE)); |
| #endif |
| |
| /* Verify that tx_prec_map and fifos are in sync to avoid lock ups */ |
| ASSERT(wlc_tx_prec_map_verify(wlc)); |
| |
| ASSERT(wlc_ps_check(wlc)); |
| } |
| |
| /* make interface operational */ |
| int BCMINITFN(wlc_up) (wlc_info_t *wlc) |
| { |
| WL_TRACE(("wl%d: %s:\n", wlc->pub->unit, __func__)); |
| |
| /* HW is turned off so don't try to access it */ |
| if (wlc->pub->hw_off || DEVICEREMOVED(wlc)) |
| return BCME_RADIOOFF; |
| |
| if (!wlc->pub->hw_up) { |
| wlc_bmac_hw_up(wlc->hw); |
| wlc->pub->hw_up = TRUE; |
| } |
| |
| if ((wlc->pub->boardflags & BFL_FEM) |
| && (CHIPID(wlc->pub->sih->chip) == BCM4313_CHIP_ID)) { |
| if (wlc->pub->boardrev >= 0x1250 |
| && (wlc->pub->boardflags & BFL_FEM_BT)) { |
| wlc_mhf(wlc, MHF5, MHF5_4313_GPIOCTRL, |
| MHF5_4313_GPIOCTRL, WLC_BAND_ALL); |
| } else { |
| wlc_mhf(wlc, MHF4, MHF4_EXTPA_ENABLE, MHF4_EXTPA_ENABLE, |
| WLC_BAND_ALL); |
| } |
| } |
| |
| /* |
| * Need to read the hwradio status here to cover the case where the system |
| * is loaded with the hw radio disabled. We do not want to bring the driver up in this case. |
| * if radio is disabled, abort up, lower power, start radio timer and return 0(for NDIS) |
| * don't call radio_update to avoid looping wlc_up. |
| * |
| * wlc_bmac_up_prep() returns either 0 or BCME_RADIOOFF only |
| */ |
| if (!wlc->pub->radio_disabled) { |
| int status = wlc_bmac_up_prep(wlc->hw); |
| if (status == BCME_RADIOOFF) { |
| if (!mboolisset |
| (wlc->pub->radio_disabled, WL_RADIO_HW_DISABLE)) { |
| int idx; |
| wlc_bsscfg_t *bsscfg; |
| mboolset(wlc->pub->radio_disabled, |
| WL_RADIO_HW_DISABLE); |
| |
| FOREACH_BSS(wlc, idx, bsscfg) { |
| if (!BSSCFG_STA(bsscfg) |
| || !bsscfg->enable || !bsscfg->BSS) |
| continue; |
| WL_ERROR(("wl%d.%d: wlc_up: rfdisable -> " "wlc_bsscfg_disable()\n", wlc->pub->unit, idx)); |
| } |
| } |
| } else |
| ASSERT(!status); |
| } |
| |
| if (wlc->pub->radio_disabled) { |
| wlc_radio_monitor_start(wlc); |
| return 0; |
| } |
| |
| /* wlc_bmac_up_prep has done wlc_corereset(). so clk is on, set it */ |
| wlc->clk = TRUE; |
| |
| wlc_radio_monitor_stop(wlc); |
| |
| /* Set EDCF hostflags */ |
| if (EDCF_ENAB(wlc->pub)) { |
| wlc_mhf(wlc, MHF1, MHF1_EDCF, MHF1_EDCF, WLC_BAND_ALL); |
| } else { |
| wlc_mhf(wlc, MHF1, MHF1_EDCF, 0, WLC_BAND_ALL); |
| } |
| |
| if (WLC_WAR16165(wlc)) |
| wlc_mhf(wlc, MHF2, MHF2_PCISLOWCLKWAR, MHF2_PCISLOWCLKWAR, |
| WLC_BAND_ALL); |
| |
| wl_init(wlc->wl); |
| wlc->pub->up = TRUE; |
| |
| if (wlc->bandinit_pending) { |
| wlc_suspend_mac_and_wait(wlc); |
| wlc_set_chanspec(wlc, wlc->default_bss->chanspec); |
| wlc->bandinit_pending = FALSE; |
| wlc_enable_mac(wlc); |
| } |
| |
| wlc_bmac_up_finish(wlc->hw); |
| |
| /* other software states up after ISR is running */ |
| /* start APs that were to be brought up but are not up yet */ |
| /* if (AP_ENAB(wlc->pub)) wlc_restart_ap(wlc->ap); */ |
| |
| /* Program the TX wme params with the current settings */ |
| wlc_wme_retries_write(wlc); |
| |
| /* start one second watchdog timer */ |
| ASSERT(!wlc->WDarmed); |
| wl_add_timer(wlc->wl, wlc->wdtimer, TIMER_INTERVAL_WATCHDOG, TRUE); |
| wlc->WDarmed = TRUE; |
| |
| /* ensure antenna config is up to date */ |
| wlc_stf_phy_txant_upd(wlc); |
| /* ensure LDPC config is in sync */ |
| wlc_ht_update_ldpc(wlc, wlc->stf->ldpc); |
| |
| return 0; |
| } |
| |
| /* Initialize the base precedence map for dequeueing from txq based on WME settings */ |
| static void BCMINITFN(wlc_tx_prec_map_init) (wlc_info_t *wlc) |
| { |
| wlc->tx_prec_map = WLC_PREC_BMP_ALL; |
| bzero(wlc->fifo2prec_map, sizeof(uint16) * NFIFO); |
| |
| /* For non-WME, both fifos have overlapping MAXPRIO. So just disable all precedences |
| * if either is full. |
| */ |
| if (!EDCF_ENAB(wlc->pub)) { |
| wlc->fifo2prec_map[TX_DATA_FIFO] = WLC_PREC_BMP_ALL; |
| wlc->fifo2prec_map[TX_CTL_FIFO] = WLC_PREC_BMP_ALL; |
| } else { |
| wlc->fifo2prec_map[TX_AC_BK_FIFO] = WLC_PREC_BMP_AC_BK; |
| wlc->fifo2prec_map[TX_AC_BE_FIFO] = WLC_PREC_BMP_AC_BE; |
| wlc->fifo2prec_map[TX_AC_VI_FIFO] = WLC_PREC_BMP_AC_VI; |
| wlc->fifo2prec_map[TX_AC_VO_FIFO] = WLC_PREC_BMP_AC_VO; |
| } |
| } |
| |
| static uint BCMUNINITFN(wlc_down_del_timer) (wlc_info_t *wlc) |
| { |
| uint callbacks = 0; |
| |
| return callbacks; |
| } |
| |
| /* |
| * Mark the interface nonoperational, stop the software mechanisms, |
| * disable the hardware, free any transient buffer state. |
| * Return a count of the number of driver callbacks still pending. |
| */ |
| uint BCMUNINITFN(wlc_down) (wlc_info_t *wlc) |
| { |
| |
| uint callbacks = 0; |
| int i; |
| bool dev_gone = FALSE; |
| wlc_txq_info_t *qi; |
| |
| WL_TRACE(("wl%d: %s:\n", wlc->pub->unit, __func__)); |
| |
| /* check if we are already in the going down path */ |
| if (wlc->going_down) { |
| WL_ERROR(("wl%d: %s: Driver going down so return\n", |
| wlc->pub->unit, __func__)); |
| return 0; |
| } |
| if (!wlc->pub->up) |
| return callbacks; |
| |
| /* in between, mpc could try to bring down again.. */ |
| wlc->going_down = TRUE; |
| |
| callbacks += wlc_bmac_down_prep(wlc->hw); |
| |
| dev_gone = DEVICEREMOVED(wlc); |
| |
| /* Call any registered down handlers */ |
| for (i = 0; i < WLC_MAXMODULES; i++) { |
| if (wlc->modulecb[i].down_fn) |
| callbacks += |
| wlc->modulecb[i].down_fn(wlc->modulecb[i].hdl); |
| } |
| |
| /* cancel the watchdog timer */ |
| if (wlc->WDarmed) { |
| if (!wl_del_timer(wlc->wl, wlc->wdtimer)) |
| callbacks++; |
| wlc->WDarmed = FALSE; |
| } |
| /* cancel all other timers */ |
| callbacks += wlc_down_del_timer(wlc); |
| |
| /* interrupt must have been blocked */ |
| ASSERT((wlc->macintmask == 0) || !wlc->pub->up); |
| |
| wlc->pub->up = FALSE; |
| |
| wlc_phy_mute_upd(wlc->band->pi, FALSE, PHY_MUTE_ALL); |
| |
| /* clear txq flow control */ |
| wlc_txflowcontrol_reset(wlc); |
| |
| /* flush tx queues */ |
| for (qi = wlc->tx_queues; qi != NULL; qi = qi->next) { |
| pktq_flush(wlc->osh, &qi->q, TRUE, NULL, 0); |
| ASSERT(pktq_empty(&qi->q)); |
| } |
| |
| /* flush event queue. |
| * Should be the last thing done after all the events are generated |
| * Just delivers the events synchronously instead of waiting for a timer |
| */ |
| callbacks += wlc_eventq_down(wlc->eventq); |
| |
| callbacks += wlc_bmac_down_finish(wlc->hw); |
| |
| /* wlc_bmac_down_finish has done wlc_coredisable(). so clk is off */ |
| wlc->clk = FALSE; |
| |
| #ifdef WLC_HIGH_ONLY |
| wlc_rpctx_txreclaim(wlc->rpctx); |
| #endif |
| |
| /* Verify all packets are flushed from the driver */ |
| if (PKTALLOCED(wlc->osh) != 0) { |
| WL_ERROR(("%d packets not freed at wlc_down!!!!!!\n", |
| PKTALLOCED(wlc->osh))); |
| } |
| #ifdef BCMDBG |
| /* Since all the packets should have been freed, |
| * all callbacks should have been called |
| */ |
| for (i = 1; i <= wlc->pub->tunables->maxpktcb; i++) |
| ASSERT(wlc->pkt_callback[i].fn == NULL); |
| #endif |
| wlc->going_down = FALSE; |
| return callbacks; |
| } |
| |
| /* Set the current gmode configuration */ |
| int wlc_set_gmode(wlc_info_t *wlc, u8 gmode, bool config) |
| { |
| int ret = 0; |
| uint i; |
| wlc_rateset_t rs; |
| /* Default to 54g Auto */ |
| s8 shortslot = WLC_SHORTSLOT_AUTO; /* Advertise and use shortslot (-1/0/1 Auto/Off/On) */ |
| bool shortslot_restrict = FALSE; /* Restrict association to stations that support shortslot |
| */ |
| bool ignore_bcns = TRUE; /* Ignore legacy beacons on the same channel */ |
| bool ofdm_basic = FALSE; /* Make 6, 12, and 24 basic rates */ |
| int preamble = WLC_PLCP_LONG; /* Advertise and use short preambles (-1/0/1 Auto/Off/On) */ |
| bool preamble_restrict = FALSE; /* Restrict association to stations that support short |
| * preambles |
| */ |
| wlcband_t *band; |
| |
| /* if N-support is enabled, allow Gmode set as long as requested |
| * Gmode is not GMODE_LEGACY_B |
| */ |
| if (N_ENAB(wlc->pub) && gmode == GMODE_LEGACY_B) |
| return BCME_UNSUPPORTED; |
| |
| /* verify that we are dealing with 2G band and grab the band pointer */ |
| if (wlc->band->bandtype == WLC_BAND_2G) |
| band = wlc->band; |
| else if ((NBANDS(wlc) > 1) && |
| (wlc->bandstate[OTHERBANDUNIT(wlc)]->bandtype == WLC_BAND_2G)) |
| band = wlc->bandstate[OTHERBANDUNIT(wlc)]; |
| else |
| return BCME_BADBAND; |
| |
| /* Legacy or bust when no OFDM is supported by regulatory */ |
| if ((wlc_channel_locale_flags_in_band(wlc->cmi, band->bandunit) & |
| WLC_NO_OFDM) && (gmode != GMODE_LEGACY_B)) |
| return BCME_RANGE; |
| |
| /* update configuration value */ |
| if (config == TRUE) |
| wlc_protection_upd(wlc, WLC_PROT_G_USER, gmode); |
| |
| /* Clear supported rates filter */ |
| bzero(&wlc->sup_rates_override, sizeof(wlc_rateset_t)); |
| |
| /* Clear rateset override */ |
| bzero(&rs, sizeof(wlc_rateset_t)); |
| |
| switch (gmode) { |
| case GMODE_LEGACY_B: |
| shortslot = WLC_SHORTSLOT_OFF; |
| wlc_rateset_copy(&gphy_legacy_rates, &rs); |
| |
| break; |
| |
| case GMODE_LRS: |
| if (AP_ENAB(wlc->pub)) |
| wlc_rateset_copy(&cck_rates, &wlc->sup_rates_override); |
| break; |
| |
| case GMODE_AUTO: |
| /* Accept defaults */ |
| break; |
| |
| case GMODE_ONLY: |
| ofdm_basic = TRUE; |
| preamble = WLC_PLCP_SHORT; |
| preamble_restrict = TRUE; |
| break; |
| |
| case GMODE_PERFORMANCE: |
| if (AP_ENAB(wlc->pub)) /* Put all rates into the Supported Rates element */ |
| wlc_rateset_copy(&cck_ofdm_rates, |
| &wlc->sup_rates_override); |
| |
| shortslot = WLC_SHORTSLOT_ON; |
| shortslot_restrict = TRUE; |
| ofdm_basic = TRUE; |
| preamble = WLC_PLCP_SHORT; |
| preamble_restrict = TRUE; |
| break; |
| |
| default: |
| /* Error */ |
| WL_ERROR(("wl%d: %s: invalid gmode %d\n", wlc->pub->unit, |
| __func__, gmode)); |
| return BCME_UNSUPPORTED; |
| } |
| |
| /* |
| * If we are switching to gmode == GMODE_LEGACY_B, |
| * clean up rate info that may refer to OFDM rates. |
| */ |
| if ((gmode == GMODE_LEGACY_B) && (band->gmode != GMODE_LEGACY_B)) { |
| band->gmode = gmode; |
| if (band->rspec_override && !IS_CCK(band->rspec_override)) { |
| band->rspec_override = 0; |
| wlc_reprate_init(wlc); |
| } |
| if (band->mrspec_override && !IS_CCK(band->mrspec_override)) { |
| band->mrspec_override = 0; |
| } |
| } |
| |
| band->gmode = gmode; |
| |
| wlc->ignore_bcns = ignore_bcns; |
| |
| wlc->shortslot_override = shortslot; |
| |
| if (AP_ENAB(wlc->pub)) { |
| /* wlc->ap->shortslot_restrict = shortslot_restrict; */ |
| wlc->PLCPHdr_override = |
| (preamble != |
| WLC_PLCP_LONG) ? WLC_PLCP_SHORT : WLC_PLCP_AUTO; |
| } |
| |
| if ((AP_ENAB(wlc->pub) && preamble != WLC_PLCP_LONG) |
| || preamble == WLC_PLCP_SHORT) |
| wlc->default_bss->capability |= DOT11_CAP_SHORT; |
| else |
| wlc->default_bss->capability &= ~DOT11_CAP_SHORT; |
| |
| /* Update shortslot capability bit for AP and IBSS */ |
| if ((AP_ENAB(wlc->pub) && shortslot == WLC_SHORTSLOT_AUTO) || |
| shortslot == WLC_SHORTSLOT_ON) |
| wlc->default_bss->capability |= DOT11_CAP_SHORTSLOT; |
| else |
| wlc->default_bss->capability &= ~DOT11_CAP_SHORTSLOT; |
| |
| /* Use the default 11g rateset */ |
| if (!rs.count) |
| wlc_rateset_copy(&cck_ofdm_rates, &rs); |
| |
| if (ofdm_basic) { |
| for (i = 0; i < rs.count; i++) { |
| if (rs.rates[i] == WLC_RATE_6M |
| || rs.rates[i] == WLC_RATE_12M |
| || rs.rates[i] == WLC_RATE_24M) |
| rs.rates[i] |= WLC_RATE_FLAG; |
| } |
| } |
| |
| /* Set default bss rateset */ |
| wlc->default_bss->rateset.count = rs.count; |
| bcopy((char *)rs.rates, (char *)wlc->default_bss->rateset.rates, |
| sizeof(wlc->default_bss->rateset.rates)); |
| |
| return ret; |
| } |
| |
| static int wlc_nmode_validate(wlc_info_t *wlc, int32 nmode) |
| { |
| int err = 0; |
| |
| switch (nmode) { |
| |
| case OFF: |
| break; |
| |
| case AUTO: |
| case WL_11N_2x2: |
| case WL_11N_3x3: |
| if (!(WLC_PHY_11N_CAP(wlc->band))) |
| err = BCME_BADBAND; |
| break; |
| |
| default: |
| err = BCME_RANGE; |
| break; |
| } |
| |
| return err; |
| } |
| |
| int wlc_set_nmode(wlc_info_t *wlc, int32 nmode) |
| { |
| uint i; |
| int err; |
| |
| err = wlc_nmode_validate(wlc, nmode); |
| ASSERT(err == 0); |
| if (err) |
| return err; |
| |
| switch (nmode) { |
| case OFF: |
| wlc->pub->_n_enab = OFF; |
| wlc->default_bss->flags &= ~WLC_BSS_HT; |
| /* delete the mcs rates from the default and hw ratesets */ |
| wlc_rateset_mcs_clear(&wlc->default_bss->rateset); |
| for (i = 0; i < NBANDS(wlc); i++) { |
| memset(wlc->bandstate[i]->hw_rateset.mcs, 0, |
| MCSSET_LEN); |
| if (IS_MCS(wlc->band->rspec_override)) { |
| wlc->bandstate[i]->rspec_override = 0; |
| wlc_reprate_init(wlc); |
| } |
| if (IS_MCS(wlc->band->mrspec_override)) |
| wlc->bandstate[i]->mrspec_override = 0; |
| } |
| break; |
| |
| case AUTO: |
| if (wlc->stf->txstreams == WL_11N_3x3) |
| nmode = WL_11N_3x3; |
| else |
| nmode = WL_11N_2x2; |
| case WL_11N_2x2: |
| case WL_11N_3x3: |
| ASSERT(WLC_PHY_11N_CAP(wlc->band)); |
| /* force GMODE_AUTO if NMODE is ON */ |
| wlc_set_gmode(wlc, GMODE_AUTO, TRUE); |
| if (nmode == WL_11N_3x3) |
| wlc->pub->_n_enab = SUPPORT_HT; |
| else |
| wlc->pub->_n_enab = SUPPORT_11N; |
| wlc->default_bss->flags |= WLC_BSS_HT; |
| /* add the mcs rates to the default and hw ratesets */ |
| wlc_rateset_mcs_build(&wlc->default_bss->rateset, |
| wlc->stf->txstreams); |
| for (i = 0; i < NBANDS(wlc); i++) |
| memcpy(wlc->bandstate[i]->hw_rateset.mcs, |
| wlc->default_bss->rateset.mcs, MCSSET_LEN); |
| break; |
| |
| default: |
| ASSERT(0); |
| break; |
| } |
| |
| return err; |
| } |
| |
| static int wlc_set_rateset(wlc_info_t *wlc, wlc_rateset_t *rs_arg) |
| { |
| wlc_rateset_t rs, new; |
| uint bandunit; |
| |
| bcopy((char *)rs_arg, (char *)&rs, sizeof(wlc_rateset_t)); |
| |
| /* check for bad count value */ |
| if ((rs.count == 0) || (rs.count > WLC_NUMRATES)) |
| return BCME_BADRATESET; |
| |
| /* try the current band */ |
| bandunit = wlc->band->bandunit; |
| bcopy((char *)&rs, (char *)&new, sizeof(wlc_rateset_t)); |
| if (wlc_rate_hwrs_filter_sort_validate |
| (&new, &wlc->bandstate[bandunit]->hw_rateset, TRUE, |
| wlc->stf->txstreams)) |
| goto good; |
| |
| /* try the other band */ |
| if (IS_MBAND_UNLOCKED(wlc)) { |
| bandunit = OTHERBANDUNIT(wlc); |
| bcopy((char *)&rs, (char *)&new, sizeof(wlc_rateset_t)); |
| if (wlc_rate_hwrs_filter_sort_validate(&new, |
| &wlc-> |
| bandstate[bandunit]-> |
| hw_rateset, TRUE, |
| wlc->stf->txstreams)) |
| goto good; |
| } |
| |
| return BCME_ERROR; |
| |
| good: |
| /* apply new rateset */ |
| bcopy((char *)&new, (char *)&wlc->default_bss->rateset, |
| sizeof(wlc_rateset_t)); |
| bcopy((char *)&new, (char *)&wlc->bandstate[bandunit]->defrateset, |
| sizeof(wlc_rateset_t)); |
| return 0; |
| } |
| |
| /* simplified integer set interface for common ioctl handler */ |
| int wlc_set(wlc_info_t *wlc, int cmd, int arg) |
| { |
| return wlc_ioctl(wlc, cmd, (void *)&arg, sizeof(arg), NULL); |
| } |
| |
| /* simplified integer get interface for common ioctl handler */ |
| int wlc_get(wlc_info_t *wlc, int cmd, int *arg) |
| { |
| return wlc_ioctl(wlc, cmd, arg, sizeof(int), NULL); |
| } |
| |
| static void wlc_ofdm_rateset_war(wlc_info_t *wlc) |
| { |
| u8 r; |
| bool war = FALSE; |
| |
| if (wlc->cfg->associated) |
| r = wlc->cfg->current_bss->rateset.rates[0]; |
| else |
| r = wlc->default_bss->rateset.rates[0]; |
| |
| wlc_phy_ofdm_rateset_war(wlc->band->pi, war); |
| |
| return; |
| } |
| |
| int |
| wlc_ioctl(wlc_info_t *wlc, int cmd, void *arg, int len, struct wlc_if *wlcif) |
| { |
| return _wlc_ioctl(wlc, cmd, arg, len, wlcif); |
| } |
| |
| /* common ioctl handler. return: 0=ok, -1=error, positive=particular error */ |
| static int |
| _wlc_ioctl(wlc_info_t *wlc, int cmd, void *arg, int len, struct wlc_if *wlcif) |
| { |
| int val, *pval; |
| bool bool_val; |
| int bcmerror; |
| d11regs_t *regs; |
| uint i; |
| struct scb *nextscb; |
| bool ta_ok; |
| uint band; |
| rw_reg_t *r; |
| wlc_bsscfg_t *bsscfg; |
| osl_t *osh; |
| wlc_bss_info_t *current_bss; |
| |
| /* update bsscfg pointer */ |
| bsscfg = NULL; /* XXX: Hack bsscfg to be size one and use this globally */ |
| current_bss = NULL; |
| |
| /* initialize the following to get rid of compiler warning */ |
| nextscb = NULL; |
| ta_ok = FALSE; |
| band = 0; |
| r = NULL; |
| |
| /* If the device is turned off, then it's not "removed" */ |
| if (!wlc->pub->hw_off && DEVICEREMOVED(wlc)) { |
| WL_ERROR(("wl%d: %s: dead chip\n", wlc->pub->unit, __func__)); |
| wl_down(wlc->wl); |
| return BCME_ERROR; |
| } |
| |
| ASSERT(!(wlc->pub->hw_off && wlc->pub->up)); |
| |
| /* default argument is generic integer */ |
| pval = arg ? (int *)arg:NULL; |
| |
| /* This will prevent the misaligned access */ |
| if (pval && (uint32) len >= sizeof(val)) |
| bcopy(pval, &val, sizeof(val)); |
| else |
| val = 0; |
| |
| /* bool conversion to avoid duplication below */ |
| bool_val = val != 0; |
| |
| if (cmd != WLC_SET_CHANNEL) |
| WL_NONE(("WLC_IOCTL: cmd %d val 0x%x (%d) len %d\n", cmd, |
| (uint) val, val, len)); |
| |
| bcmerror = 0; |
| regs = wlc->regs; |
| osh = wlc->osh; |
| |
| /* A few commands don't need any arguments; all the others do. */ |
| switch (cmd) { |
| case WLC_UP: |
| case WLC_OUT: |
| case WLC_DOWN: |
| case WLC_DISASSOC: |
| case WLC_RESTART: |
| case WLC_REBOOT: |
| case WLC_START_CHANNEL_QA: |
| case WLC_INIT: |
| break; |
| |
| default: |
| if ((arg == NULL) || (len <= 0)) { |
| WL_ERROR(("wl%d: %s: Command %d needs arguments\n", |
| wlc->pub->unit, __func__, cmd)); |
| bcmerror = BCME_BADARG; |
| goto done; |
| } |
| } |
| |
| switch (cmd) { |
| |
| #if defined(BCMDBG) |
| case WLC_GET_MSGLEVEL: |
| *pval = wl_msg_level; |
| break; |
| |
| case WLC_SET_MSGLEVEL: |
| wl_msg_level = val; |
| break; |
| #endif |
| |
| case WLC_GET_INSTANCE: |
| *pval = wlc->pub->unit; |
| break; |
| |
| case WLC_GET_CHANNEL:{ |
| channel_info_t *ci = (channel_info_t *) arg; |
| |
| ASSERT(len > (int)sizeof(ci)); |
| |
| ci->hw_channel = |
| CHSPEC_CHANNEL(WLC_BAND_PI_RADIO_CHANSPEC); |
| ci->target_channel = |
| CHSPEC_CHANNEL(wlc->default_bss->chanspec); |
| ci->scan_channel = 0; |
| |
| break; |
| } |
| |
| case WLC_SET_CHANNEL:{ |
| chanspec_t chspec = CH20MHZ_CHSPEC(val); |
| |
| if (val < 0 || val > MAXCHANNEL) { |
| bcmerror = BCME_OUTOFRANGECHAN; |
| break; |
| } |
| |
| if (!wlc_valid_chanspec_db(wlc->cmi, chspec)) { |
| bcmerror = BCME_BADCHAN; |
| break; |
| } |
| |
| if (!wlc->pub->up && IS_MBAND_UNLOCKED(wlc)) { |
| if (wlc->band->bandunit != |
| CHSPEC_WLCBANDUNIT(chspec)) |
| wlc->bandinit_pending = TRUE; |
| else |
| wlc->bandinit_pending = FALSE; |
| } |
| |
| wlc->default_bss->chanspec = chspec; |
| /* wlc_BSSinit() will sanitize the rateset before using it.. */ |
| if (wlc->pub->up && !wlc->pub->associated && |
| (WLC_BAND_PI_RADIO_CHANSPEC != chspec)) { |
| wlc_set_home_chanspec(wlc, chspec); |
| wlc_suspend_mac_and_wait(wlc); |
| wlc_set_chanspec(wlc, chspec); |
| wlc_enable_mac(wlc); |
| } |
| #ifdef WLC_HIGH_ONLY |
| /* delay for channel change */ |
| msleep(50); |
| #endif |
| break; |
| } |
| |
| #if defined(BCMDBG) |
| case WLC_GET_UCFLAGS: |
| if (!wlc->pub->up) { |
| bcmerror = BCME_NOTUP; |
| break; |
| } |
| |
| /* optional band is stored in the second integer of incoming buffer */ |
| band = |
| (len < |
| (int)(2 * sizeof(int))) ? WLC_BAND_AUTO : ((int *)arg)[1]; |
| |
| /* bcmerror checking */ |
| bcmerror = wlc_iocregchk(wlc, band); |
| if (bcmerror) |
| break; |
| |
| if (val >= MHFMAX) { |
| bcmerror = BCME_RANGE; |
| break; |
| } |
| |
| *pval = wlc_bmac_mhf_get(wlc->hw, (u8) val, WLC_BAND_AUTO); |
| break; |
| |
| case WLC_SET_UCFLAGS: |
| if (!wlc->pub->up) { |
| bcmerror = BCME_NOTUP; |
| break; |
| } |
| |
| /* optional band is stored in the second integer of incoming buffer */ |
| band = |
| (len < |
| (int)(2 * sizeof(int))) ? WLC_BAND_AUTO : ((int *)arg)[1]; |
| |
| /* bcmerror checking */ |
| bcmerror = wlc_iocregchk(wlc, band); |
| if (bcmerror) |
| break; |
| |
| i = (uint16) val; |
| if (i >= MHFMAX) { |
| bcmerror = BCME_RANGE; |
| break; |
| } |
| |
| wlc_mhf(wlc, (u8) i, 0xffff, (uint16) (val >> NBITS(uint16)), |
| WLC_BAND_AUTO); |
| break; |
| |
| case WLC_GET_SHMEM: |
| ta_ok = TRUE; |
| |
| /* optional band is stored in the second integer of incoming buffer */ |
| band = |
| (len < |
| (int)(2 * sizeof(int))) ? WLC_BAND_AUTO : ((int *)arg)[1]; |
| |
| /* bcmerror checking */ |
| bcmerror = wlc_iocregchk(wlc, band); |
| if (bcmerror) |
| break; |
| |
| if (val & 1) { |
| bcmerror = BCME_BADADDR; |
| break; |
| } |
| |
| *pval = wlc_read_shm(wlc, (uint16) val); |
| break; |
| |
| case WLC_SET_SHMEM: |
| ta_ok = TRUE; |
| |
| /* optional band is stored in the second integer of incoming buffer */ |
| band = |
| (len < |
| (int)(2 * sizeof(int))) ? WLC_BAND_AUTO : ((int *)arg)[1]; |
| |
| /* bcmerror checking */ |
| bcmerror = wlc_iocregchk(wlc, band); |
| if (bcmerror) |
| break; |
| |
| if (val & 1) { |
| bcmerror = BCME_BADADDR; |
| break; |
| } |
| |
| wlc_write_shm(wlc, (uint16) val, |
| (uint16) (val >> NBITS(uint16))); |
| break; |
| |
| case WLC_R_REG: /* MAC registers */ |
| ta_ok = TRUE; |
| r = (rw_reg_t *) arg; |
| band = WLC_BAND_AUTO; |
| |
| if (len < (int)(sizeof(rw_reg_t) - sizeof(uint))) { |
| bcmerror = BCME_BUFTOOSHORT; |
| break; |
| } |
| |
| if (len >= (int)sizeof(rw_reg_t)) |
| band = r->band; |
| |
| /* bcmerror checking */ |
| bcmerror = wlc_iocregchk(wlc, band); |
| if (bcmerror) |
| break; |
| |
| if ((r->byteoff + r->size) > sizeof(d11regs_t)) { |
| bcmerror = BCME_BADADDR; |
| break; |
| } |
| if (r->size == sizeof(uint32)) |
| r->val = |
| R_REG(osh, |
| (uint32 *) ((unsigned char *) (uintptr) regs + |
| r->byteoff)); |
| else if (r->size == sizeof(uint16)) |
| r->val = |
| R_REG(osh, |
| (uint16 *) ((unsigned char *) (uintptr) regs + |
| r->byteoff)); |
| else |
| bcmerror = BCME_BADADDR; |
| break; |
| |
| case WLC_W_REG: |
| ta_ok = TRUE; |
| r = (rw_reg_t *) arg; |
| band = WLC_BAND_AUTO; |
| |
| if (len < (int)(sizeof(rw_reg_t) - sizeof(uint))) { |
| bcmerror = BCME_BUFTOOSHORT; |
| break; |
| } |
| |
| if (len >= (int)sizeof(rw_reg_t)) |
| band = r->band; |
| |
| /* bcmerror checking */ |
| bcmerror = wlc_iocregchk(wlc, band); |
| if (bcmerror) |
| break; |
| |
| if (r->byteoff + r->size > sizeof(d11regs_t)) { |
| bcmerror = BCME_BADADDR; |
| break; |
| } |
| if (r->size == sizeof(uint32)) |
| W_REG(osh, |
| (uint32 *) ((unsigned char *) (uintptr) regs + |
| r->byteoff), r->val); |
| else if (r->size == sizeof(uint16)) |
| W_REG(osh, |
| (uint16 *) ((unsigned char *) (uintptr) regs + |
| r->byteoff), r->val); |
| else |
| bcmerror = BCME_BADADDR; |
| break; |
| #endif /* BCMDBG */ |
| |
| case WLC_GET_TXANT: |
| *pval = wlc->stf->txant; |
| break; |
| |
| case WLC_SET_TXANT: |
| bcmerror = wlc_stf_ant_txant_validate(wlc, (s8) val); |
| if (bcmerror < 0) |
| break; |
| |
| wlc->stf->txant = (s8) val; |
| |
| /* if down, we are done */ |
| if (!wlc->pub->up) |
| break; |
| |
| wlc_suspend_mac_and_wait(wlc); |
| |
| wlc_stf_phy_txant_upd(wlc); |
| wlc_beacon_phytxctl_txant_upd(wlc, wlc->bcn_rspec); |
| |
| wlc_enable_mac(wlc); |
| |
| break; |
| |
| case WLC_GET_ANTDIV:{ |
| u8 phy_antdiv; |
| |
| /* return configured value if core is down */ |
| if (!wlc->pub->up) { |
| *pval = wlc->stf->ant_rx_ovr; |
| |
| } else { |
| if (wlc_phy_ant_rxdiv_get |
| (wlc->band->pi, &phy_antdiv)) |
| *pval = (int)phy_antdiv; |
| else |
| *pval = (int)wlc->stf->ant_rx_ovr; |
| } |
| |
| break; |
| } |
| case WLC_SET_ANTDIV: |
| /* values are -1=driver default, 0=force0, 1=force1, 2=start1, 3=start0 */ |
| if ((val < -1) || (val > 3)) { |
| bcmerror = BCME_RANGE; |
| break; |
| } |
| |
| if (val == -1) |
| val = ANT_RX_DIV_DEF; |
| |
| wlc->stf->ant_rx_ovr = (u8) val; |
| wlc_phy_ant_rxdiv_set(wlc->band->pi, (u8) val); |
| break; |
| |
| case WLC_GET_RX_ANT:{ /* get latest used rx antenna */ |
| uint16 rxstatus; |
| |
| if (!wlc->pub->up) { |
| bcmerror = BCME_NOTUP; |
| break; |
| } |
| |
| rxstatus = R_REG(wlc->osh, &wlc->regs->phyrxstatus0); |
| if (rxstatus == 0xdead || rxstatus == (uint16) -1) { |
| bcmerror = BCME_ERROR; |
| break; |
| } |
| *pval = (rxstatus & PRXS0_RXANT_UPSUBBAND) ? 1 : 0; |
| break; |
| } |
| |
| #if defined(BCMDBG) |
| case WLC_GET_UCANTDIV: |
| if (!wlc->clk) { |
| bcmerror = BCME_NOCLK; |
| break; |
| } |
| |
| *pval = |
| (wlc_bmac_mhf_get(wlc->hw, MHF1, WLC_BAND_AUTO) & |
| MHF1_ANTDIV); |
| break; |
| |
| case WLC_SET_UCANTDIV:{ |
| if (!wlc->pub->up) { |
| bcmerror = BCME_NOTUP; |
| break; |
| } |
| |
| /* if multiband, band must be locked */ |
| if (IS_MBAND_UNLOCKED(wlc)) { |
| bcmerror = BCME_NOTBANDLOCKED; |
| break; |
| } |
| |
| /* 4322 supports antdiv in phy, no need to set it to ucode */ |
| if (WLCISNPHY(wlc->band) |
| && D11REV_IS(wlc->pub->corerev, 16)) { |
| WL_ERROR(("wl%d: can't set ucantdiv for 4322\n", |
| wlc->pub->unit)); |
| bcmerror = BCME_UNSUPPORTED; |
| } else |
| wlc_mhf(wlc, MHF1, MHF1_ANTDIV, |
| (val ? MHF1_ANTDIV : 0), WLC_BAND_AUTO); |
| break; |
| } |
| #endif /* defined(BCMDBG) */ |
| |
| case WLC_GET_SRL: |
| *pval = wlc->SRL; |
| break; |
| |
| case WLC_SET_SRL: |
| if (val >= 1 && val <= RETRY_SHORT_MAX) { |
| int ac; |
| wlc->SRL = (uint16) val; |
| |
| wlc_bmac_retrylimit_upd(wlc->hw, wlc->SRL, wlc->LRL); |
| |
| for (ac = 0; ac < AC_COUNT; ac++) { |
| WLC_WME_RETRY_SHORT_SET(wlc, ac, wlc->SRL); |
| } |
| wlc_wme_retries_write(wlc); |
| } else |
| bcmerror = BCME_RANGE; |
| break; |
| |
| case WLC_GET_LRL: |
| *pval = wlc->LRL; |
| break; |
| |
| case WLC_SET_LRL: |
| if (val >= 1 && val <= 255) { |
| int ac; |
| wlc->LRL = (uint16) val; |
| |
| wlc_bmac_retrylimit_upd(wlc->hw, wlc->SRL, wlc->LRL); |
| |
| for (ac = 0; ac < AC_COUNT; ac++) { |
| WLC_WME_RETRY_LONG_SET(wlc, ac, wlc->LRL); |
| } |
| wlc_wme_retries_write(wlc); |
| } else |
| bcmerror = BCME_RANGE; |
| break; |
| |
| case WLC_GET_CWMIN: |
| *pval = wlc->band->CWmin; |
| break; |
| |
| case WLC_SET_CWMIN: |
| if (!wlc->clk) { |
| bcmerror = BCME_NOCLK; |
| break; |
| } |
| |
| if (val >= 1 && val <= 255) { |
| wlc_set_cwmin(wlc, (uint16) val); |
| } else |
| bcmerror = BCME_RANGE; |
| break; |
| |
| case WLC_GET_CWMAX: |
| *pval = wlc->band->CWmax; |
| break; |
| |
| case WLC_SET_CWMAX: |
| if (!wlc->clk) { |
| bcmerror = BCME_NOCLK; |
| break; |
| } |
| |
| if (val >= 255 && val <= 2047) { |
| wlc_set_cwmax(wlc, (uint16) val); |
| } else |
| bcmerror = BCME_RANGE; |
| break; |
| |
| case WLC_GET_RADIO: /* use mask if don't want to expose some internal bits */ |
| *pval = wlc->pub->radio_disabled; |
| break; |
| |
| case WLC_SET_RADIO:{ /* 32 bits input, higher 16 bits are mask, lower 16 bits are value to |
| * set |
| */ |
| uint16 radiomask, radioval; |
| uint validbits = |
| WL_RADIO_SW_DISABLE | WL_RADIO_HW_DISABLE; |
| mbool new = 0; |
| |
| radiomask = (val & 0xffff0000) >> 16; |
| radioval = val & 0x0000ffff; |
| |
| if ((radiomask == 0) || (radiomask & ~validbits) |
| || (radioval & ~validbits) |
| || ((radioval & ~radiomask) != 0)) { |
| WL_ERROR(("SET_RADIO with wrong bits 0x%x\n", |
| val)); |
| bcmerror = BCME_RANGE; |
| break; |
| } |
| |
| new = |
| (wlc->pub->radio_disabled & ~radiomask) | radioval; |
| wlc->pub->radio_disabled = new; |
| |
| wlc_radio_hwdisable_upd(wlc); |
| wlc_radio_upd(wlc); |
| break; |
| } |
| |
| case WLC_GET_PHYTYPE: |
| *pval = WLC_PHYTYPE(wlc->band->phytype); |
| break; |
| |
| #if defined(BCMDBG) |
| case WLC_GET_KEY: |
| if ((val >= 0) && (val < WLC_MAX_WSEC_KEYS(wlc))) { |
| wl_wsec_key_t key; |
| |
| wsec_key_t *src_key = wlc->wsec_keys[val]; |
| |
| if (len < (int)sizeof(key)) { |
| bcmerror = BCME_BUFTOOSHORT; |
| break; |
| } |
| |
| bzero((char *)&key, sizeof(key)); |
| if (src_key) { |
| key.index = src_key->id; |
| key.len = src_key->len; |
| bcopy(src_key->data, key.data, key.len); |
| key.algo = src_key->algo; |
| if (WSEC_SOFTKEY(wlc, src_key, bsscfg)) |
| key.flags |= WL_SOFT_KEY; |
| if (src_key->flags & WSEC_PRIMARY_KEY) |
| key.flags |= WL_PRIMARY_KEY; |
| |
| bcopy(src_key->ea.octet, key.ea.octet, |
| ETHER_ADDR_LEN); |
| } |
| |
| bcopy((char *)&key, arg, sizeof(key)); |
| } else |
| bcmerror = BCME_BADKEYIDX; |
| break; |
| #endif /* defined(BCMDBG) */ |
| |
| case WLC_SET_KEY: |
| bcmerror = |
| wlc_iovar_op(wlc, "wsec_key", NULL, 0, arg, len, IOV_SET, |
| wlcif); |
| break; |
| |
| case WLC_GET_KEY_SEQ:{ |
| wsec_key_t *key; |
| |
| if (len < DOT11_WPA_KEY_RSC_LEN) { |
| bcmerror = BCME_BUFTOOSHORT; |
| break; |
| } |
| |
| /* Return the key's tx iv as an EAPOL sequence counter. |
| * This will be used to supply the RSC value to a supplicant. |
| * The format is 8 bytes, with least significant in seq[0]. |
| */ |
| |
| key = WSEC_KEY(wlc, val); |
| if ((val >= 0) && (val < WLC_MAX_WSEC_KEYS(wlc)) && |
| (key != NULL)) { |
| u8 seq[DOT11_WPA_KEY_RSC_LEN]; |
| uint16 lo; |
| uint32 hi; |
| /* group keys in WPA-NONE (IBSS only, AES and TKIP) use a global TXIV */ |
| if ((bsscfg->WPA_auth & WPA_AUTH_NONE) |
| && ETHER_ISNULLADDR(&key->ea)) { |
| lo = bsscfg->wpa_none_txiv.lo; |
| hi = bsscfg->wpa_none_txiv.hi; |
| } else { |
| lo = key->txiv.lo; |
| hi = key->txiv.hi; |
| } |
| |
| /* format the buffer, low to high */ |
| seq[0] = lo & 0xff; |
| seq[1] = (lo >> 8) & 0xff; |
| seq[2] = hi & 0xff; |
| seq[3] = (hi >> 8) & 0xff; |
| seq[4] = (hi >> 16) & 0xff; |
| seq[5] = (hi >> 24) & 0xff; |
| seq[6] = 0; |
| seq[7] = 0; |
| |
| bcopy((char *)seq, arg, sizeof(seq)); |
| } else { |
| bcmerror = BCME_BADKEYIDX; |
| } |
| break; |
| } |
| |
| case WLC_GET_CURR_RATESET:{ |
| wl_rateset_t *ret_rs = (wl_rateset_t *) arg; |
| wlc_rateset_t *rs; |
| |
| if (bsscfg->associated) |
| rs = ¤t_bss->rateset; |
| else |
| rs = &wlc->default_bss->rateset; |
| |
| if (len < (int)(rs->count + sizeof(rs->count))) { |
| bcmerror = BCME_BUFTOOSHORT; |
| break; |
| } |
| |
| /* Copy only legacy rateset section */ |
| ret_rs->count = rs->count; |
| bcopy(&rs->rates, &ret_rs->rates, rs->count); |
| break; |
| } |
| |
| case WLC_GET_RATESET:{ |
| wlc_rateset_t rs; |
| wl_rateset_t *ret_rs = (wl_rateset_t *) arg; |
| |
| bzero(&rs, sizeof(wlc_rateset_t)); |
| wlc_default_rateset(wlc, (wlc_rateset_t *) &rs); |
| |
| if (len < (int)(rs.count + sizeof(rs.count))) { |
| bcmerror = BCME_BUFTOOSHORT; |
| break; |
| } |
| |
| /* Copy only legacy rateset section */ |
| ret_rs->count = rs.count; |
| bcopy(&rs.rates, &ret_rs->rates, rs.count); |
| break; |
| } |
| |
| case WLC_SET_RATESET:{ |
| wlc_rateset_t rs; |
| wl_rateset_t *in_rs = (wl_rateset_t *) arg; |
| |
| if (len < (int)(in_rs->count + sizeof(in_rs->count))) { |
| bcmerror = BCME_BUFTOOSHORT; |
| break; |
| } |
| |
| if (in_rs->count > WLC_NUMRATES) { |
| bcmerror = BCME_BUFTOOLONG; |
| break; |
| } |
| |
| bzero(&rs, sizeof(wlc_rateset_t)); |
| |
| /* Copy only legacy rateset section */ |
| rs.count = in_rs->count; |
| bcopy(&in_rs->rates, &rs.rates, rs.count); |
| |
| /* merge rateset coming in with the current mcsset */ |
| if (N_ENAB(wlc->pub)) { |
| if (bsscfg->associated) |
| bcopy(¤t_bss->rateset.mcs[0], |
| rs.mcs, MCSSET_LEN); |
| else |
| bcopy(&wlc->default_bss->rateset.mcs[0], |
| rs.mcs, MCSSET_LEN); |
| } |
| |
| bcmerror = wlc_set_rateset(wlc, &rs); |
| |
| if (!bcmerror) |
| wlc_ofdm_rateset_war(wlc); |
| |
| break; |
| } |
| |
| case WLC_GET_BCNPRD: |
| if (BSSCFG_STA(bsscfg) && bsscfg->BSS && bsscfg->associated) |
| *pval = current_bss->beacon_period; |
| else |
| *pval = wlc->default_bss->beacon_period; |
| break; |
| |
| case WLC_SET_BCNPRD: |
| /* range [1, 0xffff] */ |
| if (val >= DOT11_MIN_BEACON_PERIOD |
| && val <= DOT11_MAX_BEACON_PERIOD) { |
| wlc->default_bss->beacon_period = (uint16) val; |
| } else |
| bcmerror = BCME_RANGE; |
| break; |
| |
| case WLC_GET_DTIMPRD: |
| if (BSSCFG_STA(bsscfg) && bsscfg->BSS && bsscfg->associated) |
| *pval = current_bss->dtim_period; |
| else |
| *pval = wlc->default_bss->dtim_period; |
| break; |
| |
| case WLC_SET_DTIMPRD: |
| /* range [1, 0xff] */ |
| if (val >= DOT11_MIN_DTIM_PERIOD |
| && val <= DOT11_MAX_DTIM_PERIOD) { |
| wlc->default_bss->dtim_period = (u8) val; |
| } else |
| bcmerror = BCME_RANGE; |
| break; |
| |
| #ifdef SUPPORT_PS |
| case WLC_GET_PM: |
| *pval = wlc->PM; |
| break; |
| |
| case WLC_SET_PM: |
| if ((val >= PM_OFF) && (val <= PM_MAX)) { |
| wlc->PM = (u8) val; |
| if (wlc->pub->up) { |
| } |
| /* Change watchdog driver to align watchdog with tbtt if possible */ |
| wlc_watchdog_upd(wlc, PS_ALLOWED(wlc)); |
| } else |
| bcmerror = BCME_ERROR; |
| break; |
| #endif /* SUPPORT_PS */ |
| |
| #ifdef SUPPORT_PS |
| #ifdef BCMDBG |
| case WLC_GET_WAKE: |
| if (AP_ENAB(wlc->pub)) { |
| bcmerror = BCME_NOTSTA; |
| break; |
| } |
| *pval = wlc->wake; |
| break; |
| |
| case WLC_SET_WAKE: |
| if (AP_ENAB(wlc->pub)) { |
| bcmerror = BCME_NOTSTA; |
| break; |
| } |
| |
| wlc->wake = val ? TRUE : FALSE; |
| |
| /* if down, we're done */ |
| if (!wlc->pub->up) |
| break; |
| |
| /* apply to the mac */ |
| wlc_set_ps_ctrl(wlc); |
| break; |
| #endif /* BCMDBG */ |
| #endif /* SUPPORT_PS */ |
| |
| case WLC_GET_REVINFO: |
| bcmerror = wlc_get_revision_info(wlc, arg, (uint) len); |
| break; |
| |
| case WLC_GET_AP: |
| *pval = (int)AP_ENAB(wlc->pub); |
| break; |
| |
| case WLC_GET_ATIM: |
| if (bsscfg->associated) |
| *pval = (int)current_bss->atim_window; |
| else |
| *pval = (int)wlc->default_bss->atim_window; |
| break; |
| |
| case WLC_SET_ATIM: |
| wlc->default_bss->atim_window = (uint32) val; |
| break; |
| |
| case WLC_GET_PKTCNTS:{ |
| get_pktcnt_t *pktcnt = (get_pktcnt_t *) pval; |
| if (WLC_UPDATE_STATS(wlc)) |
| wlc_statsupd(wlc); |
| pktcnt->rx_good_pkt = WLCNTVAL(wlc->pub->_cnt->rxframe); |
| pktcnt->rx_bad_pkt = WLCNTVAL(wlc->pub->_cnt->rxerror); |
| pktcnt->tx_good_pkt = |
| WLCNTVAL(wlc->pub->_cnt->txfrmsnt); |
| pktcnt->tx_bad_pkt = |
| WLCNTVAL(wlc->pub->_cnt->txerror) + |
| WLCNTVAL(wlc->pub->_cnt->txfail); |
| if (len >= (int)sizeof(get_pktcnt_t)) { |
| /* Be backward compatible - only if buffer is large enough */ |
| pktcnt->rx_ocast_good_pkt = |
| WLCNTVAL(wlc->pub->_cnt->rxmfrmocast); |
| } |
| break; |
| } |
| |
| #ifdef SUPPORT_HWKEY |
| case WLC_GET_WSEC: |
| bcmerror = |
| wlc_iovar_op(wlc, "wsec", NULL, 0, arg, len, IOV_GET, |
| wlcif); |
| break; |
| |
| case WLC_SET_WSEC: |
| bcmerror = |
| wlc_iovar_op(wlc, "wsec", NULL, 0, arg, len, IOV_SET, |
| wlcif); |
| break; |
| |
| case WLC_GET_WPA_AUTH: |
| *pval = (int)bsscfg->WPA_auth; |
| break; |
| |
| case WLC_SET_WPA_AUTH: |
| /* change of WPA_Auth modifies the PS_ALLOWED state */ |
| if (BSSCFG_STA(bsscfg)) { |
| bsscfg->WPA_auth = (uint16) val; |
| } else |
| bsscfg->WPA_auth = (uint16) val; |
| break; |
| #endif /* SUPPORT_HWKEY */ |
| |
| case WLC_GET_BANDLIST: |
| /* count of number of bands, followed by each band type */ |
| *pval++ = NBANDS(wlc); |
| *pval++ = wlc->band->bandtype; |
| if (NBANDS(wlc) > 1) |
| *pval++ = wlc->bandstate[OTHERBANDUNIT(wlc)]->bandtype; |
| break; |
| |
| case WLC_GET_BAND: |
| *pval = wlc->bandlocked ? wlc->band->bandtype : WLC_BAND_AUTO; |
| break; |
| |
| case WLC_GET_PHYLIST: |
| { |
| unsigned char *cp = arg; |
| if (len < 3) { |
| bcmerror = BCME_BUFTOOSHORT; |
| break; |
| } |
| |
| if (WLCISNPHY(wlc->band)) { |
| *cp++ = 'n'; |
| } else if (WLCISLCNPHY(wlc->band)) { |
| *cp++ = 'c'; |
| } else if (WLCISSSLPNPHY(wlc->band)) { |
| *cp++ = 's'; |
| } |
| *cp = '\0'; |
| break; |
| } |
| |
| case WLC_GET_SHORTSLOT: |
| *pval = wlc->shortslot; |
| break; |
| |
| case WLC_GET_SHORTSLOT_OVERRIDE: |
| *pval = wlc->shortslot_override; |
| break; |
| |
| case WLC_SET_SHORTSLOT_OVERRIDE: |
| if ((val != WLC_SHORTSLOT_AUTO) && |
| (val != WLC_SHORTSLOT_OFF) && (val != WLC_SHORTSLOT_ON)) { |
| bcmerror = BCME_RANGE; |
| break; |
| } |
| |
| wlc->shortslot_override = (s8) val; |
| |
| /* shortslot is an 11g feature, so no more work if we are |
| * currently on the 5G band |
| */ |
| if (BAND_5G(wlc->band->bandtype)) |
| break; |
| |
| if (wlc->pub->up && wlc->pub->associated) { |
| /* let watchdog or beacon processing update shortslot */ |
| } else if (wlc->pub->up) { |
| /* unassociated shortslot is off */ |
| wlc_switch_shortslot(wlc, FALSE); |
| } else { |
| /* driver is down, so just update the wlc_info value */ |
| if (wlc->shortslot_override == WLC_SHORTSLOT_AUTO) { |
| wlc->shortslot = FALSE; |
| } else { |
| wlc->shortslot = |
| (wlc->shortslot_override == |
| WLC_SHORTSLOT_ON); |
| } |
| } |
| |
| break; |
| |
| case WLC_GET_LEGACY_ERP: |
| *pval = wlc->include_legacy_erp; |
| break; |
| |
| case WLC_SET_LEGACY_ERP: |
| if (wlc->include_legacy_erp == bool_val) |
| break; |
| |
| wlc->include_legacy_erp = bool_val; |
| |
| if (AP_ENAB(wlc->pub) && wlc->clk) { |
| wlc_update_beacon(wlc); |
| wlc_update_probe_resp(wlc, TRUE); |
| } |
| break; |
| |
| case WLC_GET_GMODE: |
| if (wlc->band->bandtype == WLC_BAND_2G) |
| *pval = wlc->band->gmode; |
| else if (NBANDS(wlc) > 1) |
| *pval = wlc->bandstate[OTHERBANDUNIT(wlc)]->gmode; |
| break; |
| |
| case WLC_SET_GMODE: |
| if (!wlc->pub->associated) |
| bcmerror = wlc_set_gmode(wlc, (u8) val, TRUE); |
| else { |
| bcmerror = BCME_ASSOCIATED; |
| break; |
| } |
| break; |
| |
| case WLC_GET_GMODE_PROTECTION: |
| *pval = wlc->protection->_g; |
| break; |
| |
| case WLC_GET_PROTECTION_CONTROL: |
| *pval = wlc->protection->overlap; |
| break; |
| |
| case WLC_SET_PROTECTION_CONTROL: |
| if ((val != WLC_PROTECTION_CTL_OFF) && |
| (val != WLC_PROTECTION_CTL_LOCAL) && |
| (val != WLC_PROTECTION_CTL_OVERLAP)) { |
| bcmerror = BCME_RANGE; |
| break; |
| } |
| |
| wlc_protection_upd(wlc, WLC_PROT_OVERLAP, (s8) val); |
| |
| /* Current g_protection will sync up to the specified control alg in watchdog |
| * if the driver is up and associated. |
| * If the driver is down or not associated, the control setting has no effect. |
| */ |
| break; |
| |
| case WLC_GET_GMODE_PROTECTION_OVERRIDE: |
| *pval = wlc->protection->g_override; |
| break; |
| |
| case WLC_SET_GMODE_PROTECTION_OVERRIDE: |
| if ((val != WLC_PROTECTION_AUTO) && |
| (val != WLC_PROTECTION_OFF) && (val != WLC_PROTECTION_ON)) { |
| bcmerror = BCME_RANGE; |
| break; |
| } |
| |
| wlc_protection_upd(wlc, WLC_PROT_G_OVR, (s8) val); |
| |
| break; |
| |
| case WLC_SET_SUP_RATESET_OVERRIDE:{ |
| wlc_rateset_t rs, new; |
| |
| /* copyin */ |
| if (len < (int)sizeof(wlc_rateset_t)) { |
| bcmerror = BCME_BUFTOOSHORT; |
| break; |
| } |
| bcopy((char *)arg, (char *)&rs, sizeof(wlc_rateset_t)); |
| |
| /* check for bad count value */ |
| if (rs.count > WLC_NUMRATES) { |
| bcmerror = BCME_BADRATESET; /* invalid rateset */ |
| break; |
| } |
| |
| /* this command is only appropriate for gmode operation */ |
| if (!(wlc->band->gmode || |
| ((NBANDS(wlc) > 1) |
| && wlc->bandstate[OTHERBANDUNIT(wlc)]->gmode))) { |
| bcmerror = BCME_BADBAND; /* gmode only command when not in gmode */ |
| break; |
| } |
| |
| /* check for an empty rateset to clear the override */ |
| if (rs.count == 0) { |
| bzero(&wlc->sup_rates_override, |
| sizeof(wlc_rateset_t)); |
| break; |
| } |
| |
| /* validate rateset by comparing pre and post sorted against 11g hw rates */ |
| wlc_rateset_filter(&rs, &new, FALSE, WLC_RATES_CCK_OFDM, |
| RATE_MASK, BSS_N_ENAB(wlc, bsscfg)); |
| wlc_rate_hwrs_filter_sort_validate(&new, |
| &cck_ofdm_rates, |
| FALSE, |
| wlc->stf->txstreams); |
| if (rs.count != new.count) { |
| bcmerror = BCME_BADRATESET; /* invalid rateset */ |
| break; |
| } |
| |
| /* apply new rateset to the override */ |
| bcopy((char *)&new, (char *)&wlc->sup_rates_override, |
| sizeof(wlc_rateset_t)); |
| |
| /* update bcn and probe resp if needed */ |
| if (wlc->pub->up && AP_ENAB(wlc->pub) |
| && wlc->pub->associated) { |
| wlc_update_beacon(wlc); |
| wlc_update_probe_resp(wlc, TRUE); |
| } |
| break; |
| } |
| |
| case WLC_GET_SUP_RATESET_OVERRIDE: |
| /* this command is only appropriate for gmode operation */ |
| if (!(wlc->band->gmode || |
| ((NBANDS(wlc) > 1) |
| && wlc->bandstate[OTHERBANDUNIT(wlc)]->gmode))) { |
| bcmerror = BCME_BADBAND; /* gmode only command when not in gmode */ |
| break; |
| } |
| if (len < (int)sizeof(wlc_rateset_t)) { |
| bcmerror = BCME_BUFTOOSHORT; |
| break; |
| } |
| bcopy((char *)&wlc->sup_rates_override, (char *)arg, |
| sizeof(wlc_rateset_t)); |
| |
| break; |
| |
| case WLC_GET_PRB_RESP_TIMEOUT: |
| *pval = wlc->prb_resp_timeout; |
| break; |
| |
| case WLC_SET_PRB_RESP_TIMEOUT: |
| if (wlc->pub->up) { |
| bcmerror = BCME_NOTDOWN; |
| break; |
| } |
| if (val < 0 || val >= 0xFFFF) { |
| bcmerror = BCME_RANGE; /* bad value */ |
| break; |
| } |
| wlc->prb_resp_timeout = (uint16) val; |
| break; |
| |
| case WLC_GET_KEY_PRIMARY:{ |
| wsec_key_t *key; |
| |
| /* treat the 'val' parm as the key id */ |
| key = WSEC_BSS_DEFAULT_KEY(bsscfg); |
| if (key != NULL) { |
| *pval = key->id == val ? TRUE : FALSE; |
| } else { |
| bcmerror = BCME_BADKEYIDX; |
| } |
| break; |
| } |
| |
| case WLC_SET_KEY_PRIMARY:{ |
| wsec_key_t *key, *old_key; |
| |
| bcmerror = BCME_BADKEYIDX; |
| |
| /* treat the 'val' parm as the key id */ |
| for (i = 0; i < WSEC_MAX_DEFAULT_KEYS; i++) { |
| key = bsscfg->bss_def_keys[i]; |
| if (key != NULL && key->id == val) { |
| old_key = WSEC_BSS_DEFAULT_KEY(bsscfg); |
| if (old_key != NULL) |
| old_key->flags &= |
| ~WSEC_PRIMARY_KEY; |
| key->flags |= WSEC_PRIMARY_KEY; |
| bsscfg->wsec_index = i; |
| bcmerror = BCME_OK; |
| } |
| } |
| break; |
| } |
| |
| #ifdef BCMDBG |
| case WLC_INIT: |
| wl_init(wlc->wl); |
| break; |
| #endif |
| |
| case WLC_SET_VAR: |
| case WLC_GET_VAR:{ |
| char *name; |
| /* validate the name value */ |
| name = (char *)arg; |
| for (i = 0; i < (uint) len && *name != '\0'; |
| i++, name++) |
| ; |
| |
| if (i == (uint) len) { |
| bcmerror = BCME_BUFTOOSHORT; |
| break; |
| } |
| i++; /* include the null in the string length */ |
| |
| if (cmd == WLC_GET_VAR) { |
| bcmerror = |
| wlc_iovar_op(wlc, arg, |
| (void *)((s8 *) arg + i), |
| len - i, arg, len, IOV_GET, |
| wlcif); |
| } else |
| bcmerror = |
| wlc_iovar_op(wlc, arg, NULL, 0, |
| (void *)((s8 *) arg + i), |
| len - i, IOV_SET, wlcif); |
| |
| break; |
| } |
| |
| case WLC_SET_WSEC_PMK: |
| bcmerror = BCME_UNSUPPORTED; |
| break; |
| |
| #if defined(BCMDBG) |
| case WLC_CURRENT_PWR: |
| if (!wlc->pub->up) |
| bcmerror = BCME_NOTUP; |
| else |
| bcmerror = wlc_get_current_txpwr(wlc, arg, len); |
| break; |
| #endif |
| |
| case WLC_LAST: |
| WL_ERROR(("%s: WLC_LAST\n", __func__)); |
| } |
| done: |
| |
| if (bcmerror) { |
| if (VALID_BCMERROR(bcmerror)) |
| wlc->pub->bcmerror = bcmerror; |
| else { |
| bcmerror = 0; |
| } |
| |
| } |
| #ifdef WLC_LOW |
| /* BMAC_NOTE: for HIGH_ONLY driver, this seems being called after RPC bus failed */ |
| /* In hw_off condition, IOCTLs that reach here are deemed safe but taclear would |
| * certainly result in getting -1 for register reads. So skip ta_clear altogether |
| */ |
| if (!(wlc->pub->hw_off)) |
| ASSERT(wlc_bmac_taclear(wlc->hw, ta_ok) || !ta_ok); |
| #endif |
| |
| return bcmerror; |
| } |
| |
| #if defined(BCMDBG) |
| /* consolidated register access ioctl error checking */ |
| int wlc_iocregchk(wlc_info_t *wlc, uint band) |
| { |
| /* if band is specified, it must be the current band */ |
| if ((band != WLC_BAND_AUTO) && (band != (uint) wlc->band->bandtype)) |
| return BCME_BADBAND; |
| |
| /* if multiband and band is not specified, band must be locked */ |
| if ((band == WLC_BAND_AUTO) && IS_MBAND_UNLOCKED(wlc)) |
| return BCME_NOTBANDLOCKED; |
| |
| /* must have core clocks */ |
| if (!wlc->clk) |
| return BCME_NOCLK; |
| |
| return 0; |
| } |
| #endif /* defined(BCMDBG) */ |
| |
| #if defined(BCMDBG) |
| /* For some ioctls, make sure that the pi pointer matches the current phy */ |
| int wlc_iocpichk(wlc_info_t *wlc, uint phytype) |
| { |
| if (wlc->band->phytype != phytype) |
| return BCME_BADBAND; |
| return 0; |
| } |
| #endif |
| |
| /* Look up the given var name in the given table */ |
| static const bcm_iovar_t *wlc_iovar_lookup(const bcm_iovar_t *table, |
| const char *name) |
| { |
| const bcm_iovar_t *vi; |
| const char *lookup_name; |
| |
| /* skip any ':' delimited option prefixes */ |
| lookup_name = strrchr(name, ':'); |
| if (lookup_name != NULL) |
| lookup_name++; |
| else |
| lookup_name = name; |
| |
| ASSERT(table != NULL); |
| |
| for (vi = table; vi->name; vi++) { |
| if (!strcmp(vi->name, lookup_name)) |
| return vi; |
| } |
| /* ran to end of table */ |
| |
| return NULL; /* var name not found */ |
| } |
| |
| /* simplified integer get interface for common WLC_GET_VAR ioctl handler */ |
| int wlc_iovar_getint(wlc_info_t *wlc, const char *name, int *arg) |
| { |
| return wlc_iovar_op(wlc, name, NULL, 0, arg, sizeof(int32), IOV_GET, |
| NULL); |
| } |
| |
| /* simplified integer set interface for common WLC_SET_VAR ioctl handler */ |
| int wlc_iovar_setint(wlc_info_t *wlc, const char *name, int arg) |
| { |
| return wlc_iovar_op(wlc, name, NULL, 0, (void *)&arg, sizeof(arg), |
| IOV_SET, NULL); |
| } |
| |
| /* simplified s8 get interface for common WLC_GET_VAR ioctl handler */ |
| int wlc_iovar_gets8(wlc_info_t *wlc, const char *name, s8 *arg) |
| { |
| int iovar_int; |
| int err; |
| |
| err = |
| wlc_iovar_op(wlc, name, NULL, 0, &iovar_int, sizeof(iovar_int), |
| IOV_GET, NULL); |
| if (!err) |
| *arg = (s8) iovar_int; |
| |
| return err; |
| } |
| |
| /* |
| * register iovar table, watchdog and down handlers. |
| * calling function must keep 'iovars' until wlc_module_unregister is called. |
| * 'iovar' must have the last entry's name field being NULL as terminator. |
| */ |
| int |
| BCMATTACHFN(wlc_module_register) (wlc_pub_t *pub, const bcm_iovar_t *iovars, |
| const char *name, void *hdl, iovar_fn_t i_fn, |
| watchdog_fn_t w_fn, down_fn_t d_fn) { |
| wlc_info_t *wlc = (wlc_info_t *) pub->wlc; |
| int i; |
| |
| ASSERT(name != NULL); |
| ASSERT(i_fn != NULL || w_fn != NULL || d_fn != NULL); |
| |
| /* find an empty entry and just add, no duplication check! */ |
| for (i = 0; i < WLC_MAXMODULES; i++) { |
| if (wlc->modulecb[i].name[0] == '\0') { |
| strncpy(wlc->modulecb[i].name, name, |
| sizeof(wlc->modulecb[i].name) - 1); |
| wlc->modulecb[i].iovars = iovars; |
| wlc->modulecb[i].hdl = hdl; |
| wlc->modulecb[i].iovar_fn = i_fn; |
| wlc->modulecb[i].watchdog_fn = w_fn; |
| wlc->modulecb[i].down_fn = d_fn; |
| return 0; |
| } |
| } |
| |
| /* it is time to increase the capacity */ |
| ASSERT(i < WLC_MAXMODULES); |
| return BCME_NORESOURCE; |
| } |
| |
| /* unregister module callbacks */ |
| int |
| BCMATTACHFN(wlc_module_unregister) (wlc_pub_t *pub, const char *name, |
| void *hdl) { |
| wlc_info_t *wlc = (wlc_info_t *) pub->wlc; |
| int i; |
| |
| if (wlc == NULL) |
| return BCME_NOTFOUND; |
| |
| ASSERT(name != NULL); |
| |
| for (i = 0; i < WLC_MAXMODULES; i++) { |
| if (!strcmp(wlc->modulecb[i].name, name) && |
| (wlc->modulecb[i].hdl == hdl)) { |
| bzero(&wlc->modulecb[i], sizeof(modulecb_t)); |
| return 0; |
| } |
| } |
| |
| /* table not found! */ |
| return BCME_NOTFOUND; |
| } |
| |
| /* Write WME tunable parameters for retransmit/max rate from wlc struct to ucode */ |
| static void wlc_wme_retries_write(wlc_info_t *wlc) |
| { |
| int ac; |
| |
| /* Need clock to do this */ |
| if (!wlc->clk) |
| return; |
| |
| for (ac = 0; ac < AC_COUNT; ac++) { |
| wlc_write_shm(wlc, M_AC_TXLMT_ADDR(ac), wlc->wme_retries[ac]); |
| } |
| } |
| |
| /* Get or set an iovar. The params/p_len pair specifies any additional |
| * qualifying parameters (e.g. an "element index") for a get, while the |
| * arg/len pair is the buffer for the value to be set or retrieved. |
| * Operation (get/set) is specified by the last argument. |
| * interface context provided by wlcif |
| * |
| * All pointers may point into the same buffer. |
| */ |
| int |
| wlc_iovar_op(wlc_info_t *wlc, const char *name, |
| void *params, int p_len, void *arg, int len, |
| bool set, struct wlc_if *wlcif) |
| { |
| int err = 0; |
| int val_size; |
| const bcm_iovar_t *vi = NULL; |
| uint32 actionid; |
| int i; |
| |
| ASSERT(name != NULL); |
| |
| ASSERT(len >= 0); |
| |
| /* Get MUST have return space */ |
| ASSERT(set || (arg && len)); |
| |
| ASSERT(!(wlc->pub->hw_off && wlc->pub->up)); |
| |
| /* Set does NOT take qualifiers */ |
| ASSERT(!set || (!params && !p_len)); |
| |
| if (!set && (len == sizeof(int)) && |
| !(ISALIGNED((uintptr) (arg), (uint) sizeof(int)))) { |
| WL_ERROR(("wl%d: %s unaligned get ptr for %s\n", |
| wlc->pub->unit, __func__, name)); |
| ASSERT(0); |
| } |
| |
| /* find the given iovar name */ |
| for (i = 0; i < WLC_MAXMODULES; i++) { |
| if (!wlc->modulecb[i].iovars) |
| continue; |
| vi = wlc_iovar_lookup(wlc->modulecb[i].iovars, name); |
| if (vi) |
| break; |
| } |
| /* iovar name not found */ |
| if (i >= WLC_MAXMODULES) { |
| err = BCME_UNSUPPORTED; |
| #ifdef WLC_HIGH_ONLY |
| err = |
| bcmsdh_iovar_op(wlc->btparam, name, params, p_len, arg, len, |
| set); |
| #endif |
| goto exit; |
| } |
| |
| /* set up 'params' pointer in case this is a set command so that |
| * the convenience int and bool code can be common to set and get |
| */ |
| if (params == NULL) { |
| params = arg; |
| p_len = len; |
| } |
| |
| if (vi->type == IOVT_VOID) |
| val_size = 0; |
| else if (vi->type == IOVT_BUFFER) |
| val_size = len; |
| else |
| /* all other types are integer sized */ |
| val_size = sizeof(int); |
| |
| actionid = set ? IOV_SVAL(vi->varid) : IOV_GVAL(vi->varid); |
| |
| /* Do the actual parameter implementation */ |
| err = wlc->modulecb[i].iovar_fn(wlc->modulecb[i].hdl, vi, actionid, |
| name, params, p_len, arg, len, val_size, |
| wlcif); |
| |
| exit: |
| return err; |
| } |
| |
| int |
| wlc_iovar_check(wlc_pub_t *pub, const bcm_iovar_t *vi, void *arg, int len, |
| bool set) |
| { |
| wlc_info_t *wlc = (wlc_info_t *) pub->wlc; |
| int err = 0; |
| int32 int_val = 0; |
| |
| /* check generic condition flags */ |
| if (set) { |
| if (((vi->flags & IOVF_SET_DOWN) && wlc->pub->up) || |
| ((vi->flags & IOVF_SET_UP) && !wlc->pub->up)) { |
| err = (wlc->pub->up ? BCME_NOTDOWN : BCME_NOTUP); |
| } else if ((vi->flags & IOVF_SET_BAND) |
| && IS_MBAND_UNLOCKED(wlc)) { |
| err = BCME_NOTBANDLOCKED; |
| } else if ((vi->flags & IOVF_SET_CLK) && !wlc->clk) { |
| err = BCME_NOCLK; |
| } |
| } else { |
| if (((vi->flags & IOVF_GET_DOWN) && wlc->pub->up) || |
| ((vi->flags & IOVF_GET_UP) && !wlc->pub->up)) { |
| err = (wlc->pub->up ? BCME_NOTDOWN : BCME_NOTUP); |
| } else if ((vi->flags & IOVF_GET_BAND) |
| && IS_MBAND_UNLOCKED(wlc)) { |
| err = BCME_NOTBANDLOCKED; |
| } else if ((vi->flags & IOVF_GET_CLK) && !wlc->clk) { |
| err = BCME_NOCLK; |
| } |
| } |
| |
| if (err) |
| goto exit; |
| |
| /* length check on io buf */ |
| err = bcm_iovar_lencheck(vi, arg, len, set); |
| if (err) |
| goto exit; |
| |
| /* On set, check value ranges for integer types */ |
| if (set) { |
| switch (vi->type) { |
| case IOVT_BOOL: |
| case IOVT_INT8: |
| case IOVT_INT16: |
| case IOVT_INT32: |
| case IOVT_UINT8: |
| case IOVT_UINT16: |
| case IOVT_UINT32: |
| bcopy(arg, &int_val, sizeof(int)); |
| err = wlc_iovar_rangecheck(wlc, int_val, vi); |
| break; |
| } |
| } |
| exit: |
| return err; |
| } |
| |
| /* handler for iovar table wlc_iovars */ |
| /* |
| * IMPLEMENTATION NOTE: In order to avoid checking for get/set in each |
| * iovar case, the switch statement maps the iovar id into separate get |
| * and set values. If you add a new iovar to the switch you MUST use |
| * IOV_GVAL and/or IOV_SVAL in the case labels to avoid conflict with |
| * another case. |
| * Please use params for additional qualifying parameters. |
| */ |
| int |
| wlc_doiovar(void *hdl, const bcm_iovar_t *vi, uint32 actionid, |
| const char *name, void *params, uint p_len, void *arg, int len, |
| int val_size, struct wlc_if *wlcif) |
| { |
| wlc_info_t *wlc = hdl; |
| wlc_bsscfg_t *bsscfg; |
| int err = 0; |
| int32 int_val = 0; |
| int32 int_val2 = 0; |
| int32 *ret_int_ptr; |
| bool bool_val; |
| bool bool_val2; |
| wlc_bss_info_t *current_bss; |
| |
| WL_TRACE(("wl%d: %s\n", wlc->pub->unit, __func__)); |
| |
| bsscfg = NULL; |
| current_bss = NULL; |
| |
| err = wlc_iovar_check(wlc->pub, vi, arg, len, IOV_ISSET(actionid)); |
| if (err != 0) |
| return err; |
| |
| /* convenience int and bool vals for first 8 bytes of buffer */ |
| if (p_len >= (int)sizeof(int_val)) |
| bcopy(params, &int_val, sizeof(int_val)); |
| |
| if (p_len >= (int)sizeof(int_val) * 2) |
| bcopy((void *)((uintptr) params + sizeof(int_val)), &int_val2, |
| sizeof(int_val)); |
| |
| /* convenience int ptr for 4-byte gets (requires int aligned arg) */ |
| ret_int_ptr = (int32 *) arg; |
| |
| bool_val = (int_val != 0) ? TRUE : FALSE; |
| bool_val2 = (int_val2 != 0) ? TRUE : FALSE; |
| |
| WL_TRACE(("wl%d: %s: id %d\n", wlc->pub->unit, __func__, |
| IOV_ID(actionid))); |
| /* Do the actual parameter implementation */ |
| switch (actionid) { |
| |
| case IOV_GVAL(IOV_QTXPOWER):{ |
| uint qdbm; |
| bool override; |
| |
| err = wlc_phy_txpower_get(wlc->band->pi, &qdbm, |
| &override); |
| if (err != BCME_OK) |
| return err; |
| |
| /* Return qdbm units */ |
| *ret_int_ptr = |
| qdbm | (override ? WL_TXPWR_OVERRIDE : 0); |
| break; |
| } |
| |
| /* As long as override is false, this only sets the *user* targets. |
| User can twiddle this all he wants with no harm. |
| wlc_phy_txpower_set() explicitly sets override to false if |
| not internal or test. |
| */ |
| case IOV_SVAL(IOV_QTXPOWER):{ |
| u8 qdbm; |
| bool override; |
| |
| /* Remove override bit and clip to max qdbm value */ |
| qdbm = |
| (u8) MIN((int_val & ~WL_TXPWR_OVERRIDE), 0xff); |
| /* Extract override setting */ |
| override = (int_val & WL_TXPWR_OVERRIDE) ? TRUE : FALSE; |
| err = |
| wlc_phy_txpower_set(wlc->band->pi, qdbm, override); |
| break; |
| } |
| |
| case IOV_GVAL(IOV_MPC): |
| *ret_int_ptr = (int32) wlc->mpc; |
| break; |
| |
| case IOV_SVAL(IOV_MPC): |
| wlc->mpc = bool_val; |
| wlc_radio_mpc_upd(wlc); |
| |
| break; |
| |
| case IOV_GVAL(IOV_BCN_LI_BCN): |
| *ret_int_ptr = wlc->bcn_li_bcn; |
| break; |
| |
| case IOV_SVAL(IOV_BCN_LI_BCN): |
| wlc->bcn_li_bcn = (u8) int_val; |
| if (wlc->pub->up) |
| wlc_bcn_li_upd(wlc); |
| break; |
| |
| default: |
| WL_ERROR(("wl%d: %s: unsupported\n", wlc->pub->unit, __func__)); |
| err = BCME_UNSUPPORTED; |
| break; |
| } |
| |
| goto exit; /* avoid unused label warning */ |
| |
| exit: |
| return err; |
| } |
| |
| static int |
| wlc_iovar_rangecheck(wlc_info_t *wlc, uint32 val, const bcm_iovar_t *vi) |
| { |
| int err = 0; |
| uint32 min_val = 0; |
| uint32 max_val = 0; |
| |
| /* Only ranged integers are checked */ |
| switch (vi->type) { |
| case IOVT_INT32: |
| max_val |= 0x7fffffff; |
| /* fall through */ |
| case IOVT_INT16: |
| max_val |= 0x00007fff; |
| /* fall through */ |
| case IOVT_INT8: |
| max_val |= 0x0000007f; |
| min_val = ~max_val; |
| if (vi->flags & IOVF_NTRL) |
| min_val = 1; |
| else if (vi->flags & IOVF_WHL) |
| min_val = 0; |
| /* Signed values are checked against max_val and min_val */ |
| if ((int32) val < (int32) min_val |
| || (int32) val > (int32) max_val) |
| err = BCME_RANGE; |
| break; |
| |
| case IOVT_UINT32: |
| max_val |= 0xffffffff; |
| /* fall through */ |
| case IOVT_UINT16: |
| max_val |= 0x0000ffff; |
| /* fall through */ |
| case IOVT_UINT8: |
| max_val |= 0x000000ff; |
| if (vi->flags & IOVF_NTRL) |
| min_val = 1; |
| if ((val < min_val) || (val > max_val)) |
| err = BCME_RANGE; |
| break; |
| } |
| |
| return err; |
| } |
| |
| #ifdef BCMDBG |
| static const char *supr_reason[] = { |
| "None", "PMQ Entry", "Flush request", |
| "Previous frag failure", "Channel mismatch", |
| "Lifetime Expiry", "Underflow" |
| }; |
| |
| static void wlc_print_txs_status(uint16 s) |
| { |
| printf("[15:12] %d frame attempts\n", (s & TX_STATUS_FRM_RTX_MASK) >> |
| TX_STATUS_FRM_RTX_SHIFT); |
| printf(" [11:8] %d rts attempts\n", (s & TX_STATUS_RTS_RTX_MASK) >> |
| TX_STATUS_RTS_RTX_SHIFT); |
| printf(" [7] %d PM mode indicated\n", |
| ((s & TX_STATUS_PMINDCTD) ? 1 : 0)); |
| printf(" [6] %d intermediate status\n", |
| ((s & TX_STATUS_INTERMEDIATE) ? 1 : 0)); |
| printf(" [5] %d AMPDU\n", (s & TX_STATUS_AMPDU) ? 1 : 0); |
| printf(" [4:2] %d Frame Suppressed Reason (%s)\n", |
| ((s & TX_STATUS_SUPR_MASK) >> TX_STATUS_SUPR_SHIFT), |
| supr_reason[(s & TX_STATUS_SUPR_MASK) >> TX_STATUS_SUPR_SHIFT]); |
| printf(" [1] %d acked\n", ((s & TX_STATUS_ACK_RCV) ? 1 : 0)); |
| } |
| #endif /* BCMDBG */ |
| |
| void wlc_print_txstatus(tx_status_t *txs) |
| { |
| #if defined(BCMDBG) |
| uint16 s = txs->status; |
| uint16 ackphyrxsh = txs->ackphyrxsh; |
| |
| printf("\ntxpkt (MPDU) Complete\n"); |
| |
| printf("FrameID: %04x ", txs->frameid); |
| printf("TxStatus: %04x", s); |
| printf("\n"); |
| #ifdef BCMDBG |
| wlc_print_txs_status(s); |
| #endif |
| printf("LastTxTime: %04x ", txs->lasttxtime); |
| printf("Seq: %04x ", txs->sequence); |
| printf("PHYTxStatus: %04x ", txs->phyerr); |
| printf("RxAckRSSI: %04x ", |
| (ackphyrxsh & PRXS1_JSSI_MASK) >> PRXS1_JSSI_SHIFT); |
| printf("RxAckSQ: %04x", (ackphyrxsh & PRXS1_SQ_MASK) >> PRXS1_SQ_SHIFT); |
| printf("\n"); |
| #endif /* defined(BCMDBG) */ |
| } |
| |
| #define MACSTATUPD(name) \ |
| wlc_ctrupd_cache(macstats.name, &wlc->core->macstat_snapshot->name, &wlc->pub->_cnt->name) |
| |
| void wlc_statsupd(wlc_info_t *wlc) |
| { |
| int i; |
| #ifdef BCMDBG |
| uint16 delta; |
| uint16 rxf0ovfl; |
| uint16 txfunfl[NFIFO]; |
| #endif /* BCMDBG */ |
| |
| /* if driver down, make no sense to update stats */ |
| if (!wlc->pub->up) |
| return; |
| |
| #ifdef BCMDBG |
| /* save last rx fifo 0 overflow count */ |
| rxf0ovfl = wlc->core->macstat_snapshot->rxf0ovfl; |
| |
| /* save last tx fifo underflow count */ |
| for (i = 0; i < NFIFO; i++) |
| txfunfl[i] = wlc->core->macstat_snapshot->txfunfl[i]; |
| #endif /* BCMDBG */ |
| |
| #ifdef BCMDBG |
| /* check for rx fifo 0 overflow */ |
| delta = (uint16) (wlc->core->macstat_snapshot->rxf0ovfl - rxf0ovfl); |
| if (delta) |
| WL_ERROR(("wl%d: %u rx fifo 0 overflows!\n", wlc->pub->unit, |
| delta)); |
| |
| /* check for tx fifo underflows */ |
| for (i = 0; i < NFIFO; i++) { |
| delta = |
| (uint16) (wlc->core->macstat_snapshot->txfunfl[i] - |
| txfunfl[i]); |
| if (delta) |
| WL_ERROR(("wl%d: %u tx fifo %d underflows!\n", |
| wlc->pub->unit, delta, i)); |
| } |
| #endif /* BCMDBG */ |
| |
| /* dot11 counter update */ |
| |
| WLCNTSET(wlc->pub->_cnt->txrts, |
| (wlc->pub->_cnt->rxctsucast - |
| wlc->pub->_cnt->d11cnt_txrts_off)); |
| WLCNTSET(wlc->pub->_cnt->rxcrc, |
| (wlc->pub->_cnt->rxbadfcs - wlc->pub->_cnt->d11cnt_rxcrc_off)); |
| WLCNTSET(wlc->pub->_cnt->txnocts, |
| ((wlc->pub->_cnt->txrtsfrm - wlc->pub->_cnt->rxctsucast) - |
| wlc->pub->_cnt->d11cnt_txnocts_off)); |
| |
| /* merge counters from dma module */ |
| for (i = 0; i < NFIFO; i++) { |
| if (wlc->hw->di[i]) { |
| WLCNTADD(wlc->pub->_cnt->txnobuf, |
| (wlc->hw->di[i])->txnobuf); |
| WLCNTADD(wlc->pub->_cnt->rxnobuf, |
| (wlc->hw->di[i])->rxnobuf); |
| WLCNTADD(wlc->pub->_cnt->rxgiant, |
| (wlc->hw->di[i])->rxgiants); |
| dma_counterreset(wlc->hw->di[i]); |
| } |
| } |
| |
| /* |
| * Aggregate transmit and receive errors that probably resulted |
| * in the loss of a frame are computed on the fly. |
| */ |
| WLCNTSET(wlc->pub->_cnt->txerror, |
| wlc->pub->_cnt->txnobuf + wlc->pub->_cnt->txnoassoc + |
| wlc->pub->_cnt->txuflo + wlc->pub->_cnt->txrunt + |
| wlc->pub->_cnt->dmade + wlc->pub->_cnt->dmada + |
| wlc->pub->_cnt->dmape); |
| WLCNTSET(wlc->pub->_cnt->rxerror, |
| wlc->pub->_cnt->rxoflo + wlc->pub->_cnt->rxnobuf + |
| wlc->pub->_cnt->rxfragerr + wlc->pub->_cnt->rxrunt + |
| wlc->pub->_cnt->rxgiant + wlc->pub->_cnt->rxnoscb + |
| wlc->pub->_cnt->rxbadsrcmac); |
| for (i = 0; i < NFIFO; i++) |
| WLCNTADD(wlc->pub->_cnt->rxerror, wlc->pub->_cnt->rxuflo[i]); |
| } |
| |
| bool wlc_chipmatch(uint16 vendor, uint16 device) |
| { |
| if (vendor != VENDOR_BROADCOM) { |
| WL_ERROR(("wlc_chipmatch: unknown vendor id %04x\n", vendor)); |
| return FALSE; |
| } |
| |
| if ((device == BCM43224_D11N_ID) || (device == BCM43225_D11N2G_ID)) |
| return TRUE; |
| |
| if (device == BCM4313_D11N2G_ID) |
| return TRUE; |
| if ((device == BCM43236_D11N_ID) || (device == BCM43236_D11N2G_ID)) |
| return TRUE; |
| |
| WL_ERROR(("wlc_chipmatch: unknown device id %04x\n", device)); |
| return FALSE; |
| } |
| |
| #if defined(BCMDBG) |
| void wlc_print_txdesc(d11txh_t *txh) |
| { |
| uint16 mtcl = ltoh16(txh->MacTxControlLow); |
| uint16 mtch = ltoh16(txh->MacTxControlHigh); |
| uint16 mfc = ltoh16(txh->MacFrameControl); |
| uint16 tfest = ltoh16(txh->TxFesTimeNormal); |
| uint16 ptcw = ltoh16(txh->PhyTxControlWord); |
| uint16 ptcw_1 = ltoh16(txh->PhyTxControlWord_1); |
| uint16 ptcw_1_Fbr = ltoh16(txh->PhyTxControlWord_1_Fbr); |
| uint16 ptcw_1_Rts = ltoh16(txh->PhyTxControlWord_1_Rts); |
| uint16 ptcw_1_FbrRts = ltoh16(txh->PhyTxControlWord_1_FbrRts); |
| uint16 mainrates = ltoh16(txh->MainRates); |
| uint16 xtraft = ltoh16(txh->XtraFrameTypes); |
| u8 *iv = txh->IV; |
| u8 *ra = txh->TxFrameRA; |
| uint16 tfestfb = ltoh16(txh->TxFesTimeFallback); |
| u8 *rtspfb = txh->RTSPLCPFallback; |
| uint16 rtsdfb = ltoh16(txh->RTSDurFallback); |
| u8 *fragpfb = txh->FragPLCPFallback; |
| uint16 fragdfb = ltoh16(txh->FragDurFallback); |
| uint16 mmodelen = ltoh16(txh->MModeLen); |
| uint16 mmodefbrlen = ltoh16(txh->MModeFbrLen); |
| uint16 tfid = ltoh16(txh->TxFrameID); |
| uint16 txs = ltoh16(txh->TxStatus); |
| uint16 mnmpdu = ltoh16(txh->MaxNMpdus); |
| uint16 mabyte = ltoh16(txh->MaxABytes_MRT); |
| uint16 mabyte_f = ltoh16(txh->MaxABytes_FBR); |
| uint16 mmbyte = ltoh16(txh->MinMBytes); |
| |
| u8 *rtsph = txh->RTSPhyHeader; |
| struct dot11_rts_frame rts = txh->rts_frame; |
| char hexbuf[256]; |
| |
| /* add plcp header along with txh descriptor */ |
| prhex("Raw TxDesc + plcp header", (unsigned char *) txh, sizeof(d11txh_t) + 48); |
| |
| printf("TxCtlLow: %04x ", mtcl); |
| printf("TxCtlHigh: %04x ", mtch); |
| printf("FC: %04x ", mfc); |
| printf("FES Time: %04x\n", tfest); |
| printf("PhyCtl: %04x%s ", ptcw, |
| (ptcw & PHY_TXC_SHORT_HDR) ? " short" : ""); |
| printf("PhyCtl_1: %04x ", ptcw_1); |
| printf("PhyCtl_1_Fbr: %04x\n", ptcw_1_Fbr); |
| printf("PhyCtl_1_Rts: %04x ", ptcw_1_Rts); |
| printf("PhyCtl_1_Fbr_Rts: %04x\n", ptcw_1_FbrRts); |
| printf("MainRates: %04x ", mainrates); |
| printf("XtraFrameTypes: %04x ", xtraft); |
| printf("\n"); |
| |
| bcm_format_hex(hexbuf, iv, sizeof(txh->IV)); |
| printf("SecIV: %s\n", hexbuf); |
| bcm_format_hex(hexbuf, ra, sizeof(txh->TxFrameRA)); |
| printf("RA: %s\n", hexbuf); |
| |
| printf("Fb FES Time: %04x ", tfestfb); |
| bcm_format_hex(hexbuf, rtspfb, sizeof(txh->RTSPLCPFallback)); |
| printf("RTS PLCP: %s ", hexbuf); |
| printf("RTS DUR: %04x ", rtsdfb); |
| bcm_format_hex(hexbuf, fragpfb, sizeof(txh->FragPLCPFallback)); |
| printf("PLCP: %s ", hexbuf); |
| printf("DUR: %04x", fragdfb); |
| printf("\n"); |
| |
| printf("MModeLen: %04x ", mmodelen); |
| printf("MModeFbrLen: %04x\n", mmodefbrlen); |
| |
| printf("FrameID: %04x\n", tfid); |
| printf("TxStatus: %04x\n", txs); |
| |
| printf("MaxNumMpdu: %04x\n", mnmpdu); |
| printf("MaxAggbyte: %04x\n", mabyte); |
| printf("MaxAggbyte_fb: %04x\n", mabyte_f); |
| printf("MinByte: %04x\n", mmbyte); |
| |
| bcm_format_hex(hexbuf, rtsph, sizeof(txh->RTSPhyHeader)); |
| printf("RTS PLCP: %s ", hexbuf); |
| bcm_format_hex(hexbuf, (u8 *) &rts, sizeof(txh->rts_frame)); |
| printf("RTS Frame: %s", hexbuf); |
| printf("\n"); |
| |
| } |
| #endif /* defined(BCMDBG) */ |
| |
| #if defined(BCMDBG) |
| void wlc_print_rxh(d11rxhdr_t *rxh) |
| { |
| uint16 len = rxh->RxFrameSize; |
| uint16 phystatus_0 = rxh->PhyRxStatus_0; |
| uint16 phystatus_1 = rxh->PhyRxStatus_1; |
| uint16 phystatus_2 = rxh->PhyRxStatus_2; |
| uint16 phystatus_3 = rxh->PhyRxStatus_3; |
| uint16 macstatus1 = rxh->RxStatus1; |
| uint16 macstatus2 = rxh->RxStatus2; |
| char flagstr[64]; |
| char lenbuf[20]; |
| static const bcm_bit_desc_t macstat_flags[] = { |
| {RXS_FCSERR, "FCSErr"}, |
| {RXS_RESPFRAMETX, "Reply"}, |
| {RXS_PBPRES, "PADDING"}, |
| {RXS_DECATMPT, "DeCr"}, |
| {RXS_DECERR, "DeCrErr"}, |
| {RXS_BCNSENT, "Bcn"}, |
| {0, NULL} |
| }; |
| |
| prhex("Raw RxDesc", (unsigned char *) rxh, sizeof(d11rxhdr_t)); |
| |
| bcm_format_flags(macstat_flags, macstatus1, flagstr, 64); |
| |
| snprintf(lenbuf, sizeof(lenbuf), "0x%x", len); |
| |
| printf("RxFrameSize: %6s (%d)%s\n", lenbuf, len, |
| (rxh->PhyRxStatus_0 & PRXS0_SHORTH) ? " short preamble" : ""); |
| printf("RxPHYStatus: %04x %04x %04x %04x\n", |
| phystatus_0, phystatus_1, phystatus_2, phystatus_3); |
| printf("RxMACStatus: %x %s\n", macstatus1, flagstr); |
| printf("RXMACaggtype: %x\n", (macstatus2 & RXS_AGGTYPE_MASK)); |
| printf("RxTSFTime: %04x\n", rxh->RxTSFTime); |
| } |
| #endif /* defined(BCMDBG) */ |
| |
| #if defined(BCMDBG) |
| int wlc_format_ssid(char *buf, const unsigned char ssid[], uint ssid_len) |
| { |
| uint i, c; |
| char *p = buf; |
| char *endp = buf + SSID_FMT_BUF_LEN; |
| |
| if (ssid_len > DOT11_MAX_SSID_LEN) |
| ssid_len = DOT11_MAX_SSID_LEN; |
| |
| for (i = 0; i < ssid_len; i++) { |
| c = (uint) ssid[i]; |
| if (c == '\\') { |
| *p++ = '\\'; |
| *p++ = '\\'; |
| } else if (isprint((unsigned char) c)) { |
| *p++ = (char)c; |
| } else { |
| p += snprintf(p, (endp - p), "\\x%02X", c); |
| } |
| } |
| *p = '\0'; |
| ASSERT(p < endp); |
| |
| return (int)(p - buf); |
| } |
| #endif /* defined(BCMDBG) */ |
| |
| uint16 wlc_rate_shm_offset(wlc_info_t *wlc, u8 rate) |
| { |
| return wlc_bmac_rate_shm_offset(wlc->hw, rate); |
| } |
| |
| /* Callback for device removed */ |
| #if defined(WLC_HIGH_ONLY) |
| void wlc_device_removed(void *arg) |
| { |
| wlc_info_t *wlc = (wlc_info_t *) arg; |
| |
| wlc->device_present = FALSE; |
| } |
| #endif /* WLC_HIGH_ONLY */ |
| |
| /* |
| * Attempts to queue a packet onto a multiple-precedence queue, |
| * if necessary evicting a lower precedence packet from the queue. |
| * |
| * 'prec' is the precedence number that has already been mapped |
| * from the packet priority. |
| * |
| * Returns TRUE if packet consumed (queued), FALSE if not. |
| */ |
| bool BCMFASTPATH |
| wlc_prec_enq(wlc_info_t *wlc, struct pktq *q, void *pkt, int prec) |
| { |
| return wlc_prec_enq_head(wlc, q, pkt, prec, FALSE); |
| } |
| |
| bool BCMFASTPATH |
| wlc_prec_enq_head(wlc_info_t *wlc, struct pktq *q, void *pkt, int prec, |
| bool head) |
| { |
| void *p; |
| int eprec = -1; /* precedence to evict from */ |
| |
| /* Determine precedence from which to evict packet, if any */ |
| if (pktq_pfull(q, prec)) |
| eprec = prec; |
| else if (pktq_full(q)) { |
| p = pktq_peek_tail(q, &eprec); |
| ASSERT(p != NULL); |
| if (eprec > prec) { |
| WL_ERROR(("%s: Failing: eprec %d > prec %d\n", __func__, |
| eprec, prec)); |
| return FALSE; |
| } |
| } |
| |
| /* Evict if needed */ |
| if (eprec >= 0) { |
| bool discard_oldest; |
| |
| /* Detect queueing to unconfigured precedence */ |
| ASSERT(!pktq_pempty(q, eprec)); |
| |
| discard_oldest = AC_BITMAP_TST(wlc->wme_dp, eprec); |
| |
| /* Refuse newer packet unless configured to discard oldest */ |
| if (eprec == prec && !discard_oldest) { |
| WL_ERROR(("%s: No where to go, prec == %d\n", __func__, |
| prec)); |
| return FALSE; |
| } |
| |
| /* Evict packet according to discard policy */ |
| p = discard_oldest ? pktq_pdeq(q, eprec) : pktq_pdeq_tail(q, |
| eprec); |
| ASSERT(p != NULL); |
| |
| /* Increment wme stats */ |
| if (WME_ENAB(wlc->pub)) { |
| WLCNTINCR(wlc->pub->_wme_cnt-> |
| tx_failed[WME_PRIO2AC(PKTPRIO(p))].packets); |
| WLCNTADD(wlc->pub->_wme_cnt-> |
| tx_failed[WME_PRIO2AC(PKTPRIO(p))].bytes, |
| pkttotlen(wlc->osh, p)); |
| } |
| |
| ASSERT(0); |
| PKTFREE(wlc->osh, p, TRUE); |
| WLCNTINCR(wlc->pub->_cnt->txnobuf); |
| } |
| |
| /* Enqueue */ |
| if (head) |
| p = pktq_penq_head(q, prec, pkt); |
| else |
| p = pktq_penq(q, prec, pkt); |
| ASSERT(p != NULL); |
| |
| return TRUE; |
| } |
| |
| void BCMFASTPATH wlc_txq_enq(void *ctx, struct scb *scb, void *sdu, uint prec) |
| { |
| wlc_info_t *wlc = (wlc_info_t *) ctx; |
| wlc_txq_info_t *qi = wlc->active_queue; /* Check me */ |
| struct pktq *q = &qi->q; |
| int prio; |
| |
| prio = PKTPRIO(sdu); |
| |
| ASSERT(pktq_max(q) >= wlc->pub->tunables->datahiwat); |
| |
| if (!wlc_prec_enq(wlc, q, sdu, prec)) { |
| if (!EDCF_ENAB(wlc->pub) |
| || (wlc->pub->wlfeatureflag & WL_SWFL_FLOWCONTROL)) |
| WL_ERROR(("wl%d: wlc_txq_enq: txq overflow\n", |
| wlc->pub->unit)); |
| |
| /* ASSERT(9 == 8); *//* XXX we might hit this condtion in case packet flooding from mac80211 stack */ |
| PKTFREE(wlc->osh, sdu, TRUE); |
| WLCNTINCR(wlc->pub->_cnt->txnobuf); |
| } |
| |
| /* Check if flow control needs to be turned on after enqueuing the packet |
| * Don't turn on flow control if EDCF is enabled. Driver would make the decision on what |
| * to drop instead of relying on stack to make the right decision |
| */ |
| if (!EDCF_ENAB(wlc->pub) |
| || (wlc->pub->wlfeatureflag & WL_SWFL_FLOWCONTROL)) { |
| if (pktq_len(q) >= wlc->pub->tunables->datahiwat) { |
| wlc_txflowcontrol(wlc, qi, ON, ALLPRIO); |
| } |
| } else if (wlc->pub->_priofc) { |
| if (pktq_plen(q, wlc_prio2prec_map[prio]) >= |
| wlc->pub->tunables->datahiwat) { |
| wlc_txflowcontrol(wlc, qi, ON, prio); |
| } |
| } |
| } |
| |
| bool BCMFASTPATH |
| wlc_sendpkt_mac80211(wlc_info_t *wlc, void *sdu, struct ieee80211_hw *hw) |
| { |
| u8 prio; |
| uint fifo; |
| void *pkt; |
| struct scb *scb = &global_scb; |
| struct dot11_header *d11_header = (struct dot11_header *)PKTDATA(sdu); |
| uint16 type, fc; |
| |
| ASSERT(sdu); |
| |
| fc = ltoh16(d11_header->fc); |
| type = FC_TYPE(fc); |
| |
| /* 802.11 standard requires management traffic to go at highest priority */ |
| prio = (type == FC_TYPE_DATA ? PKTPRIO(sdu) : MAXPRIO); |
| fifo = prio2fifo[prio]; |
| |
| ASSERT((uint) PKTHEADROOM(sdu) >= TXOFF); |
| ASSERT(!PKTSHARED(sdu)); |
| ASSERT(!PKTNEXT(sdu)); |
| ASSERT(!PKTLINK(sdu)); |
| ASSERT(fifo < NFIFO); |
| |
| pkt = sdu; |
| if (unlikely |
| (wlc_d11hdrs_mac80211(wlc, hw, pkt, scb, 0, 1, fifo, 0, NULL, 0))) |
| return -EINVAL; |
| wlc_txq_enq(wlc, scb, pkt, WLC_PRIO_TO_PREC(prio)); |
| wlc_send_q(wlc, wlc->active_queue); |
| |
| WLCNTINCR(wlc->pub->_cnt->ieee_tx); |
| return 0; |
| } |
| |
| void BCMFASTPATH wlc_send_q(wlc_info_t *wlc, wlc_txq_info_t *qi) |
| { |
| void *pkt[DOT11_MAXNUMFRAGS]; |
| int prec; |
| uint16 prec_map; |
| int err = 0, i, count; |
| uint fifo; |
| struct pktq *q = &qi->q; |
| struct ieee80211_tx_info *tx_info; |
| |
| /* only do work for the active queue */ |
| if (qi != wlc->active_queue) |
| return; |
| |
| if (in_send_q) |
| return; |
| else |
| in_send_q = TRUE; |
| |
| prec_map = wlc->tx_prec_map; |
| |
| /* Send all the enq'd pkts that we can. |
| * Dequeue packets with precedence with empty HW fifo only |
| */ |
| while (prec_map && (pkt[0] = pktq_mdeq(q, prec_map, &prec))) { |
| tx_info = IEEE80211_SKB_CB(pkt[0]); |
| if (tx_info->flags & IEEE80211_TX_CTL_AMPDU) { |
| err = wlc_sendampdu(wlc->ampdu, qi, pkt, prec); |
| } else { |
| count = 1; |
| err = wlc_prep_pdu(wlc, pkt[0], &fifo); |
| if (!err) { |
| for (i = 0; i < count; i++) { |
| wlc_txfifo(wlc, fifo, pkt[i], TRUE, 1); |
| } |
| } |
| } |
| |
| if (err == BCME_BUSY) { |
| pktq_penq_head(q, prec, pkt[0]); |
| /* If send failed due to any other reason than a change in |
| * HW FIFO condition, quit. Otherwise, read the new prec_map! |
| */ |
| if (prec_map == wlc->tx_prec_map) |
| break; |
| prec_map = wlc->tx_prec_map; |
| } |
| } |
| |
| /* Check if flow control needs to be turned off after sending the packet */ |
| if (!EDCF_ENAB(wlc->pub) |
| || (wlc->pub->wlfeatureflag & WL_SWFL_FLOWCONTROL)) { |
| if (wlc_txflowcontrol_prio_isset(wlc, qi, ALLPRIO) |
| && (pktq_len(q) < wlc->pub->tunables->datahiwat / 2)) { |
| wlc_txflowcontrol(wlc, qi, OFF, ALLPRIO); |
| } |
| } else if (wlc->pub->_priofc) { |
| int prio; |
| for (prio = MAXPRIO; prio >= 0; prio--) { |
| if (wlc_txflowcontrol_prio_isset(wlc, qi, prio) && |
| (pktq_plen(q, wlc_prio2prec_map[prio]) < |
| wlc->pub->tunables->datahiwat / 2)) { |
| wlc_txflowcontrol(wlc, qi, OFF, prio); |
| } |
| } |
| } |
| in_send_q = FALSE; |
| } |
| |
| /* |
| * bcmc_fid_generate: |
| * Generate frame ID for a BCMC packet. The frag field is not used |
| * for MC frames so is used as part of the sequence number. |
| */ |
| static inline uint16 |
| bcmc_fid_generate(wlc_info_t *wlc, wlc_bsscfg_t *bsscfg, d11txh_t *txh) |
| { |
| uint16 frameid; |
| |
| frameid = ltoh16(txh->TxFrameID) & ~(TXFID_SEQ_MASK | TXFID_QUEUE_MASK); |
| frameid |= |
| (((wlc-> |
| mc_fid_counter++) << TXFID_SEQ_SHIFT) & TXFID_SEQ_MASK) | |
| TX_BCMC_FIFO; |
| |
| return frameid; |
| } |
| |
| void BCMFASTPATH |
| wlc_txfifo(wlc_info_t *wlc, uint fifo, void *p, bool commit, s8 txpktpend) |
| { |
| uint16 frameid = INVALIDFID; |
| d11txh_t *txh; |
| |
| ASSERT(fifo < NFIFO); |
| txh = (d11txh_t *) PKTDATA(p); |
| |
| /* When a BC/MC frame is being committed to the BCMC fifo via DMA (NOT PIO), update |
| * ucode or BSS info as appropriate. |
| */ |
| if (fifo == TX_BCMC_FIFO) { |
| frameid = ltoh16(txh->TxFrameID); |
| |
| } |
| |
| if (WLC_WAR16165(wlc)) |
| wlc_war16165(wlc, TRUE); |
| |
| #ifdef WLC_HIGH_ONLY |
| if (RPCTX_ENAB(wlc->pub)) { |
| (void)wlc_rpctx_tx(wlc->rpctx, fifo, p, commit, frameid, |
| txpktpend); |
| return; |
| } |
| #else |
| |
| /* Bump up pending count for if not using rpc. If rpc is used, this will be handled |
| * in wlc_bmac_txfifo() |
| */ |
| if (commit) { |
| TXPKTPENDINC(wlc, fifo, txpktpend); |
| WL_TRACE(("wlc_txfifo, pktpend inc %d to %d\n", txpktpend, |
| TXPKTPENDGET(wlc, fifo))); |
| } |
| |
| /* Commit BCMC sequence number in the SHM frame ID location */ |
| if (frameid != INVALIDFID) |
| BCMCFID(wlc, frameid); |
| |
| if (dma_txfast(wlc->hw->di[fifo], p, commit) < 0) { |
| WL_ERROR(("wlc_txfifo: fatal, toss frames !!!\n")); |
| } |
| #endif /* WLC_HIGH_ONLY */ |
| } |
| |
| static uint16 |
| wlc_compute_airtime(wlc_info_t *wlc, ratespec_t rspec, uint length) |
| { |
| uint16 usec = 0; |
| uint mac_rate = RSPEC2RATE(rspec); |
| uint nsyms; |
| |
| if (IS_MCS(rspec)) { |
| /* not supported yet */ |
| ASSERT(0); |
| } else if (IS_OFDM(rspec)) { |
| /* nsyms = Ceiling(Nbits / (Nbits/sym)) |
| * |
| * Nbits = length * 8 |
| * Nbits/sym = Mbps * 4 = mac_rate * 2 |
| */ |
| nsyms = CEIL((length * 8), (mac_rate * 2)); |
| |
| /* usec = symbols * usec/symbol */ |
| usec = (uint16) (nsyms * APHY_SYMBOL_TIME); |
| return usec; |
| } else { |
| switch (mac_rate) { |
| case WLC_RATE_1M: |
| usec = length << 3; |
| break; |
| case WLC_RATE_2M: |
| usec = length << 2; |
| break; |
| case WLC_RATE_5M5: |
| usec = (length << 4) / 11; |
| break; |
| case WLC_RATE_11M: |
| usec = (length << 3) / 11; |
| break; |
| default: |
| WL_ERROR(("wl%d: wlc_compute_airtime: unsupported rspec 0x%x\n", wlc->pub->unit, rspec)); |
| ASSERT((const char *)"Bad phy_rate" == NULL); |
| break; |
| } |
| } |
| |
| return usec; |
| } |
| |
| void BCMFASTPATH |
| wlc_compute_plcp(wlc_info_t *wlc, ratespec_t rspec, uint length, u8 *plcp) |
| { |
| if (IS_MCS(rspec)) { |
| wlc_compute_mimo_plcp(rspec, length, plcp); |
| } else if (IS_OFDM(rspec)) { |
| wlc_compute_ofdm_plcp(rspec, length, plcp); |
| } else { |
| wlc_compute_cck_plcp(rspec, length, plcp); |
| } |
| return; |
| } |
| |
| /* Rate: 802.11 rate code, length: PSDU length in octets */ |
| static void wlc_compute_mimo_plcp(ratespec_t rspec, uint length, u8 *plcp) |
| { |
| u8 mcs = (u8) (rspec & RSPEC_RATE_MASK); |
| ASSERT(IS_MCS(rspec)); |
| plcp[0] = mcs; |
| if (RSPEC_IS40MHZ(rspec) || (mcs == 32)) |
| plcp[0] |= MIMO_PLCP_40MHZ; |
| WLC_SET_MIMO_PLCP_LEN(plcp, length); |
| plcp[3] = RSPEC_MIMOPLCP3(rspec); /* rspec already holds this byte */ |
| plcp[3] |= 0x7; /* set smoothing, not sounding ppdu & reserved */ |
| plcp[4] = 0; /* number of extension spatial streams bit 0 & 1 */ |
| plcp[5] = 0; |
| } |
| |
| /* Rate: 802.11 rate code, length: PSDU length in octets */ |
| static void BCMFASTPATH |
| wlc_compute_ofdm_plcp(ratespec_t rspec, uint32 length, u8 *plcp) |
| { |
| u8 rate_signal; |
| uint32 tmp = 0; |
| int rate = RSPEC2RATE(rspec); |
| |
| ASSERT(IS_OFDM(rspec)); |
| |
| /* encode rate per 802.11a-1999 sec 17.3.4.1, with lsb transmitted first */ |
| rate_signal = rate_info[rate] & RATE_MASK; |
| ASSERT(rate_signal != 0); |
| |
| bzero(plcp, D11_PHY_HDR_LEN); |
| D11A_PHY_HDR_SRATE((ofdm_phy_hdr_t *) plcp, rate_signal); |
| |
| tmp = (length & 0xfff) << 5; |
| plcp[2] |= (tmp >> 16) & 0xff; |
| plcp[1] |= (tmp >> 8) & 0xff; |
| plcp[0] |= tmp & 0xff; |
| |
| return; |
| } |
| |
| /* |
| * Compute PLCP, but only requires actual rate and length of pkt. |
| * Rate is given in the driver standard multiple of 500 kbps. |
| * le is set for 11 Mbps rate if necessary. |
| * Broken out for PRQ. |
| */ |
| |
| static void wlc_cck_plcp_set(int rate_500, uint length, u8 *plcp) |
| { |
| uint16 usec = 0; |
| u8 le = 0; |
| |
| switch (rate_500) { |
| case WLC_RATE_1M: |
| usec = length << 3; |
| break; |
| case WLC_RATE_2M: |
| usec = length << 2; |
| break; |
| case WLC_RATE_5M5: |
| usec = (length << 4) / 11; |
| if ((length << 4) - (usec * 11) > 0) |
| usec++; |
| break; |
| case WLC_RATE_11M: |
| usec = (length << 3) / 11; |
| if ((length << 3) - (usec * 11) > 0) { |
| usec++; |
| if ((usec * 11) - (length << 3) >= 8) |
| le = D11B_PLCP_SIGNAL_LE; |
| } |
| break; |
| |
| default: |
| WL_ERROR(("wlc_cck_plcp_set: unsupported rate %d\n", rate_500)); |
| rate_500 = WLC_RATE_1M; |
| usec = length << 3; |
| break; |
| } |
| /* PLCP signal byte */ |
| plcp[0] = rate_500 * 5; /* r (500kbps) * 5 == r (100kbps) */ |
| /* PLCP service byte */ |
| plcp[1] = (u8) (le | D11B_PLCP_SIGNAL_LOCKED); |
| /* PLCP length uint16, little endian */ |
| plcp[2] = usec & 0xff; |
| plcp[3] = (usec >> 8) & 0xff; |
| /* PLCP CRC16 */ |
| plcp[4] = 0; |
| plcp[5] = 0; |
| } |
| |
| /* Rate: 802.11 rate code, length: PSDU length in octets */ |
| static void wlc_compute_cck_plcp(ratespec_t rspec, uint length, u8 *plcp) |
| { |
| int rate = RSPEC2RATE(rspec); |
| |
| ASSERT(IS_CCK(rspec)); |
| |
| wlc_cck_plcp_set(rate, length, plcp); |
| } |
| |
| /* wlc_compute_frame_dur() |
| * |
| * Calculate the 802.11 MAC header DUR field for MPDU |
| * DUR for a single frame = 1 SIFS + 1 ACK |
| * DUR for a frame with following frags = 3 SIFS + 2 ACK + next frag time |
| * |
| * rate MPDU rate in unit of 500kbps |
| * next_frag_len next MPDU length in bytes |
| * preamble_type use short/GF or long/MM PLCP header |
| */ |
| static uint16 BCMFASTPATH |
| wlc_compute_frame_dur(wlc_info_t *wlc, ratespec_t rate, u8 preamble_type, |
| uint next_frag_len) |
| { |
| uint16 dur, sifs; |
| |
| sifs = SIFS(wlc->band); |
| |
| dur = sifs; |
| dur += (uint16) wlc_calc_ack_time(wlc, rate, preamble_type); |
| |
| if (next_frag_len) { |
| /* Double the current DUR to get 2 SIFS + 2 ACKs */ |
| dur *= 2; |
| /* add another SIFS and the frag time */ |
| dur += sifs; |
| dur += |
| (uint16) wlc_calc_frame_time(wlc, rate, preamble_type, |
| next_frag_len); |
| } |
| return dur; |
| } |
| |
| /* wlc_compute_rtscts_dur() |
| * |
| * Calculate the 802.11 MAC header DUR field for an RTS or CTS frame |
| * DUR for normal RTS/CTS w/ frame = 3 SIFS + 1 CTS + next frame time + 1 ACK |
| * DUR for CTS-TO-SELF w/ frame = 2 SIFS + next frame time + 1 ACK |
| * |
| * cts cts-to-self or rts/cts |
| * rts_rate rts or cts rate in unit of 500kbps |
| * rate next MPDU rate in unit of 500kbps |
| * frame_len next MPDU frame length in bytes |
| */ |
| uint16 BCMFASTPATH |
| wlc_compute_rtscts_dur(wlc_info_t *wlc, bool cts_only, ratespec_t rts_rate, |
| ratespec_t frame_rate, u8 rts_preamble_type, |
| u8 frame_preamble_type, uint frame_len, bool ba) |
| { |
| uint16 dur, sifs; |
| |
| sifs = SIFS(wlc->band); |
| |
| if (!cts_only) { /* RTS/CTS */ |
| dur = 3 * sifs; |
| dur += |
| (uint16) wlc_calc_cts_time(wlc, rts_rate, |
| rts_preamble_type); |
| } else { /* CTS-TO-SELF */ |
| dur = 2 * sifs; |
| } |
| |
| dur += |
| (uint16) wlc_calc_frame_time(wlc, frame_rate, frame_preamble_type, |
| frame_len); |
| if (ba) |
| dur += |
| (uint16) wlc_calc_ba_time(wlc, frame_rate, |
| WLC_SHORT_PREAMBLE); |
| else |
| dur += |
| (uint16) wlc_calc_ack_time(wlc, frame_rate, |
| frame_preamble_type); |
| return dur; |
| } |
| |
| static bool wlc_phy_rspec_check(wlc_info_t *wlc, uint16 bw, ratespec_t rspec) |
| { |
| if (IS_MCS(rspec)) { |
| uint mcs = rspec & RSPEC_RATE_MASK; |
| |
| if (mcs < 8) { |
| ASSERT(RSPEC_STF(rspec) < PHY_TXC1_MODE_SDM); |
| } else if ((mcs >= 8) && (mcs <= 23)) { |
| ASSERT(RSPEC_STF(rspec) == PHY_TXC1_MODE_SDM); |
| } else if (mcs == 32) { |
| ASSERT(RSPEC_STF(rspec) < PHY_TXC1_MODE_SDM); |
| ASSERT(bw == PHY_TXC1_BW_40MHZ_DUP); |
| } |
| } else if (IS_OFDM(rspec)) { |
| ASSERT(RSPEC_STF(rspec) < PHY_TXC1_MODE_STBC); |
| } else { |
| ASSERT(IS_CCK(rspec)); |
| |
| ASSERT((bw == PHY_TXC1_BW_20MHZ) |
| || (bw == PHY_TXC1_BW_20MHZ_UP)); |
| ASSERT(RSPEC_STF(rspec) == PHY_TXC1_MODE_SISO); |
| } |
| |
| return TRUE; |
| } |
| |
| uint16 BCMFASTPATH wlc_phytxctl1_calc(wlc_info_t *wlc, ratespec_t rspec) |
| { |
| uint16 phyctl1 = 0; |
| uint16 bw; |
| |
| if (WLCISLCNPHY(wlc->band)) { |
| bw = PHY_TXC1_BW_20MHZ; |
| } else { |
| bw = RSPEC_GET_BW(rspec); |
| /* 10Mhz is not supported yet */ |
| if (bw < PHY_TXC1_BW_20MHZ) { |
| WL_ERROR(("wlc_phytxctl1_calc: bw %d is not supported yet, set to 20L\n", bw)); |
| bw = PHY_TXC1_BW_20MHZ; |
| } |
| |
| wlc_phy_rspec_check(wlc, bw, rspec); |
| } |
| |
| if (IS_MCS(rspec)) { |
| uint mcs = rspec & RSPEC_RATE_MASK; |
| |
| /* bw, stf, coding-type is part of RSPEC_PHYTXBYTE2 returns */ |
| phyctl1 = RSPEC_PHYTXBYTE2(rspec); |
| /* set the upper byte of phyctl1 */ |
| phyctl1 |= (mcs_table[mcs].tx_phy_ctl3 << 8); |
| } else if (IS_CCK(rspec) && !WLCISLCNPHY(wlc->band) |
| && !WLCISSSLPNPHY(wlc->band)) { |
| /* In CCK mode LPPHY overloads OFDM Modulation bits with CCK Data Rate */ |
| /* Eventually MIMOPHY would also be converted to this format */ |
| /* 0 = 1Mbps; 1 = 2Mbps; 2 = 5.5Mbps; 3 = 11Mbps */ |
| phyctl1 = (bw | (RSPEC_STF(rspec) << PHY_TXC1_MODE_SHIFT)); |
| } else { /* legacy OFDM/CCK */ |
| int16 phycfg; |
| /* get the phyctl byte from rate phycfg table */ |
| phycfg = wlc_rate_legacy_phyctl(RSPEC2RATE(rspec)); |
| if (phycfg == -1) { |
| WL_ERROR(("wlc_phytxctl1_calc: wrong legacy OFDM/CCK rate\n")); |
| ASSERT(0); |
| phycfg = 0; |
| } |
| /* set the upper byte of phyctl1 */ |
| phyctl1 = |
| (bw | (phycfg << 8) | |
| (RSPEC_STF(rspec) << PHY_TXC1_MODE_SHIFT)); |
| } |
| |
| #ifdef BCMDBG |
| /* phy clock must support 40Mhz if tx descriptor uses it */ |
| if ((phyctl1 & PHY_TXC1_BW_MASK) >= PHY_TXC1_BW_40MHZ) { |
| ASSERT(CHSPEC_WLC_BW(wlc->chanspec) == WLC_40_MHZ); |
| #ifndef WLC_HIGH_ONLY |
| ASSERT(wlc->chanspec == wlc_phy_chanspec_get(wlc->band->pi)); |
| #endif |
| } |
| #endif /* BCMDBG */ |
| return phyctl1; |
| } |
| |
| ratespec_t BCMFASTPATH |
| wlc_rspec_to_rts_rspec(wlc_info_t *wlc, ratespec_t rspec, bool use_rspec, |
| uint16 mimo_ctlchbw) |
| { |
| ratespec_t rts_rspec = 0; |
| |
| if (use_rspec) { |
| /* use frame rate as rts rate */ |
| rts_rspec = rspec; |
| |
| } else if (wlc->band->gmode && wlc->protection->_g && !IS_CCK(rspec)) { |
| /* Use 11Mbps as the g protection RTS target rate and fallback. |
| * Use the WLC_BASIC_RATE() lookup to find the best basic rate under the |
| * target in case 11 Mbps is not Basic. |
| * 6 and 9 Mbps are not usually selected by rate selection, but even |
| * if the OFDM rate we are protecting is 6 or 9 Mbps, 11 is more robust. |
| */ |
| rts_rspec = WLC_BASIC_RATE(wlc, WLC_RATE_11M); |
| } else { |
| /* calculate RTS rate and fallback rate based on the frame rate |
| * RTS must be sent at a basic rate since it is a |
| * control frame, sec 9.6 of 802.11 spec |
| */ |
| rts_rspec = WLC_BASIC_RATE(wlc, rspec); |
| } |
| |
| if (WLC_PHY_11N_CAP(wlc->band)) { |
| /* set rts txbw to correct side band */ |
| rts_rspec &= ~RSPEC_BW_MASK; |
| |
| /* if rspec/rspec_fallback is 40MHz, then send RTS on both 20MHz channel |
| * (DUP), otherwise send RTS on control channel |
| */ |
| if (RSPEC_IS40MHZ(rspec) && !IS_CCK(rts_rspec)) |
| rts_rspec |= (PHY_TXC1_BW_40MHZ_DUP << RSPEC_BW_SHIFT); |
| else |
| rts_rspec |= (mimo_ctlchbw << RSPEC_BW_SHIFT); |
| |
| /* pick siso/cdd as default for ofdm */ |
| if (IS_OFDM(rts_rspec)) { |
| rts_rspec &= ~RSPEC_STF_MASK; |
| rts_rspec |= (wlc->stf->ss_opmode << RSPEC_STF_SHIFT); |
| } |
| } |
| return rts_rspec; |
| } |
| |
| /* |
| * Add d11txh_t, cck_phy_hdr_t. |
| * |
| * 'p' data must start with 802.11 MAC header |
| * 'p' must allow enough bytes of local headers to be "pushed" onto the packet |
| * |
| * headroom == D11_PHY_HDR_LEN + D11_TXH_LEN (D11_TXH_LEN is now 104 bytes) |
| * |
| */ |
| static uint16 BCMFASTPATH |
| wlc_d11hdrs_mac80211(wlc_info_t *wlc, struct ieee80211_hw *hw, |
| void *p, struct scb *scb, uint frag, |
| uint nfrags, uint queue, uint next_frag_len, |
| wsec_key_t *key, ratespec_t rspec_override) |
| { |
| struct dot11_header *h; |
| d11txh_t *txh; |
| u8 *plcp, plcp_fallback[D11_PHY_HDR_LEN]; |
| osl_t *osh; |
| int len, phylen, rts_phylen; |
| uint16 fc, type, frameid, mch, phyctl, xfts, mainrates; |
| uint16 seq = 0, mcl = 0, status = 0; |
| ratespec_t rspec[2] = { WLC_RATE_1M, WLC_RATE_1M }, rts_rspec[2] = { |
| WLC_RATE_1M, WLC_RATE_1M}; |
| bool use_rts = FALSE; |
| bool use_cts = FALSE; |
| bool use_rifs = FALSE; |
| bool short_preamble[2] = { FALSE, FALSE }; |
| u8 preamble_type[2] = { WLC_LONG_PREAMBLE, WLC_LONG_PREAMBLE }; |
| u8 rts_preamble_type[2] = { WLC_LONG_PREAMBLE, WLC_LONG_PREAMBLE }; |
| u8 *rts_plcp, rts_plcp_fallback[D11_PHY_HDR_LEN]; |
| struct dot11_rts_frame *rts = NULL; |
| bool qos; |
| uint ac; |
| uint32 rate_val[2]; |
| bool hwtkmic = FALSE; |
| uint16 mimo_ctlchbw = PHY_TXC1_BW_20MHZ; |
| #ifdef WLANTSEL |
| #define ANTCFG_NONE 0xFF |
| u8 antcfg = ANTCFG_NONE; |
| u8 fbantcfg = ANTCFG_NONE; |
| #endif |
| uint phyctl1_stf = 0; |
| uint16 durid = 0; |
| struct ieee80211_tx_rate *txrate[2]; |
| int k; |
| struct ieee80211_tx_info *tx_info; |
| bool is_mcs[2]; |
| uint16 mimo_txbw; |
| u8 mimo_preamble_type; |
| |
| frameid = 0; |
| |
| ASSERT(queue < NFIFO); |
| |
| osh = wlc->osh; |
| |
| /* locate 802.11 MAC header */ |
| h = (struct dot11_header *)PKTDATA(p); |
| fc = ltoh16(h->fc); |
| type = FC_TYPE(fc); |
| |
| qos = (type == FC_TYPE_DATA && FC_SUBTYPE_ANY_QOS(FC_SUBTYPE(fc))); |
| |
| /* compute length of frame in bytes for use in PLCP computations */ |
| len = pkttotlen(osh, p); |
| phylen = len + DOT11_FCS_LEN; |
| |
| /* If WEP enabled, add room in phylen for the additional bytes of |
| * ICV which MAC generates. We do NOT add the additional bytes to |
| * the packet itself, thus phylen = packet length + ICV_LEN + FCS_LEN |
| * in this case |
| */ |
| if (key) { |
| phylen += key->icv_len; |
| } |
| |
| /* Get tx_info */ |
| tx_info = IEEE80211_SKB_CB(p); |
| ASSERT(tx_info); |
| |
| /* add PLCP */ |
| plcp = PKTPUSH(p, D11_PHY_HDR_LEN); |
| |
| /* add Broadcom tx descriptor header */ |
| txh = (d11txh_t *) PKTPUSH(p, D11_TXH_LEN); |
| bzero((char *)txh, D11_TXH_LEN); |
| |
| /* setup frameid */ |
| if (tx_info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) { |
| /* non-AP STA should never use BCMC queue */ |
| ASSERT(queue != TX_BCMC_FIFO); |
| if (queue == TX_BCMC_FIFO) { |
| WL_ERROR(("wl%d: %s: ASSERT queue == TX_BCMC!\n", |
| WLCWLUNIT(wlc), __func__)); |
| frameid = bcmc_fid_generate(wlc, NULL, txh); |
| } else { |
| /* Increment the counter for first fragment */ |
| if (tx_info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT) { |
| SCB_SEQNUM(scb, PKTPRIO(p))++; |
| } |
| |
| /* extract fragment number from frame first */ |
| seq = ltoh16(seq) & FRAGNUM_MASK; |
| seq |= (SCB_SEQNUM(scb, PKTPRIO(p)) << SEQNUM_SHIFT); |
| h->seq = htol16(seq); |
| |
| frameid = ((seq << TXFID_SEQ_SHIFT) & TXFID_SEQ_MASK) | |
| (queue & TXFID_QUEUE_MASK); |
| } |
| } |
| frameid |= queue & TXFID_QUEUE_MASK; |
| |
| /* set the ignpmq bit for all pkts tx'd in PS mode and for beacons */ |
| if (SCB_PS(scb) || ((fc & FC_KIND_MASK) == FC_BEACON)) |
| mcl |= TXC_IGNOREPMQ; |
| |
| ASSERT(hw->max_rates <= IEEE80211_TX_MAX_RATES); |
| ASSERT(hw->max_rates == 2); |
| |
| txrate[0] = tx_info->control.rates; |
| txrate[1] = txrate[0] + 1; |
| |
| ASSERT(txrate[0]->idx >= 0); |
| /* if rate control algorithm didn't give us a fallback rate, use the primary rate */ |
| if (txrate[1]->idx < 0) { |
| txrate[1] = txrate[0]; |
| } |
| #ifdef WLC_HIGH_ONLY |
| /* Double protection , just in case */ |
| if (txrate[0]->idx > HIGHEST_SINGLE_STREAM_MCS) |
| txrate[0]->idx = HIGHEST_SINGLE_STREAM_MCS; |
| if (txrate[1]->idx > HIGHEST_SINGLE_STREAM_MCS) |
| txrate[1]->idx = HIGHEST_SINGLE_STREAM_MCS; |
| #endif |
| |
| for (k = 0; k < hw->max_rates; k++) { |
| is_mcs[k] = |
| txrate[k]->flags & IEEE80211_TX_RC_MCS ? TRUE : FALSE; |
| if (!is_mcs[k]) { |
| ASSERT(!(tx_info->flags & IEEE80211_TX_CTL_AMPDU)); |
| if ((txrate[k]->idx >= 0) |
| && (txrate[k]->idx < |
| hw->wiphy->bands[tx_info->band]->n_bitrates)) { |
| rate_val[k] = |
| hw->wiphy->bands[tx_info->band]-> |
| bitrates[txrate[k]->idx].hw_value; |
| short_preamble[k] = |
| txrate[k]-> |
| flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE ? |
| TRUE : FALSE; |
| } else { |
| ASSERT((txrate[k]->idx >= 0) && |
| (txrate[k]->idx < |
| hw->wiphy->bands[tx_info->band]-> |
| n_bitrates)); |
| rate_val[k] = WLC_RATE_1M; |
| } |
| } else { |
| rate_val[k] = txrate[k]->idx; |
| } |
| /* Currently only support same setting for primay and fallback rates. |
| * Unify flags for each rate into a single value for the frame |
| */ |
| use_rts |= |
| txrate[k]-> |
| flags & IEEE80211_TX_RC_USE_RTS_CTS ? TRUE : FALSE; |
| use_cts |= |
| txrate[k]-> |
| flags & IEEE80211_TX_RC_USE_CTS_PROTECT ? TRUE : FALSE; |
| |
| if (is_mcs[k]) |
| rate_val[k] |= NRATE_MCS_INUSE; |
| |
| rspec[k] = mac80211_wlc_set_nrate(wlc, wlc->band, rate_val[k]); |
| |
| /* (1) RATE: determine and validate primary rate and fallback rates */ |
| if (!RSPEC_ACTIVE(rspec[k])) { |
| ASSERT(RSPEC_ACTIVE(rspec[k])); |
| rspec[k] = WLC_RATE_1M; |
| } else { |
| if (WLANTSEL_ENAB(wlc) && !ETHER_ISMULTI(&h->a1)) { |
| /* set tx antenna config */ |
| wlc_antsel_antcfg_get(wlc->asi, FALSE, FALSE, 0, |
| 0, &antcfg, &fbantcfg); |
| } |
| } |
| } |
| |
| phyctl1_stf = wlc->stf->ss_opmode; |
| |
| if (N_ENAB(wlc->pub)) { |
| for (k = 0; k < hw->max_rates; k++) { |
| /* apply siso/cdd to single stream mcs's or ofdm if rspec is auto selected */ |
| if (((IS_MCS(rspec[k]) && |
| IS_SINGLE_STREAM(rspec[k] & RSPEC_RATE_MASK)) || |
| IS_OFDM(rspec[k])) |
| && ((rspec[k] & RSPEC_OVERRIDE_MCS_ONLY) |
| || !(rspec[k] & RSPEC_OVERRIDE))) { |
| rspec[k] &= ~(RSPEC_STF_MASK | RSPEC_STC_MASK); |
| |
| /* For SISO MCS use STBC if possible */ |
| if (IS_MCS(rspec[k]) |
| && WLC_STF_SS_STBC_TX(wlc, scb)) { |
| u8 stc; |
| |
| ASSERT(WLC_STBC_CAP_PHY(wlc)); |
| stc = 1; /* Nss for single stream is always 1 */ |
| rspec[k] |= |
| (PHY_TXC1_MODE_STBC << |
| RSPEC_STF_SHIFT) | (stc << |
| RSPEC_STC_SHIFT); |
| } else |
| rspec[k] |= |
| (phyctl1_stf << RSPEC_STF_SHIFT); |
| } |
| |
| /* Is the phy configured to use 40MHZ frames? If so then pick the desired txbw */ |
| if (CHSPEC_WLC_BW(wlc->chanspec) == WLC_40_MHZ) { |
| /* default txbw is 20in40 SB */ |
| mimo_ctlchbw = mimo_txbw = |
| CHSPEC_SB_UPPER(WLC_BAND_PI_RADIO_CHANSPEC) |
| ? PHY_TXC1_BW_20MHZ_UP : PHY_TXC1_BW_20MHZ; |
| |
| if (IS_MCS(rspec[k])) { |
| /* mcs 32 must be 40b/w DUP */ |
| if ((rspec[k] & RSPEC_RATE_MASK) == 32) { |
| mimo_txbw = |
| PHY_TXC1_BW_40MHZ_DUP; |
| /* use override */ |
| } else if (wlc->mimo_40txbw != AUTO) |
| mimo_txbw = wlc->mimo_40txbw; |
| /* else check if dst is using 40 Mhz */ |
| else if (scb->flags & SCB_IS40) |
| mimo_txbw = PHY_TXC1_BW_40MHZ; |
| } else if (IS_OFDM(rspec[k])) { |
| if (wlc->ofdm_40txbw != AUTO) |
| mimo_txbw = wlc->ofdm_40txbw; |
| } else { |
| ASSERT(IS_CCK(rspec[k])); |
| if (wlc->cck_40txbw != AUTO) |
| mimo_txbw = wlc->cck_40txbw; |
| } |
| } else { |
| /* mcs32 is 40 b/w only. |
| * This is possible for probe packets on a STA during SCAN |
| */ |
| if ((rspec[k] & RSPEC_RATE_MASK) == 32) { |
| /* mcs 0 */ |
| rspec[k] = RSPEC_MIMORATE; |
| } |
| mimo_txbw = PHY_TXC1_BW_20MHZ; |
| } |
| |
| /* Set channel width */ |
| rspec[k] &= ~RSPEC_BW_MASK; |
| if ((k == 0) || ((k > 0) && IS_MCS(rspec[k]))) |
| rspec[k] |= (mimo_txbw << RSPEC_BW_SHIFT); |
| else |
| rspec[k] |= (mimo_ctlchbw << RSPEC_BW_SHIFT); |
| |
| /* Set Short GI */ |
| #ifdef NOSGIYET |
| if (IS_MCS(rspec[k]) |
| && (txrate[k]->flags & IEEE80211_TX_RC_SHORT_GI)) |
| rspec[k] |= RSPEC_SHORT_GI; |
| else if (!(txrate[k]->flags & IEEE80211_TX_RC_SHORT_GI)) |
| rspec[k] &= ~RSPEC_SHORT_GI; |
| #else |
| rspec[k] &= ~RSPEC_SHORT_GI; |
| #endif |
| |
| mimo_preamble_type = WLC_MM_PREAMBLE; |
| if (txrate[k]->flags & IEEE80211_TX_RC_GREEN_FIELD) |
| mimo_preamble_type = WLC_GF_PREAMBLE; |
| |
| if ((txrate[k]->flags & IEEE80211_TX_RC_MCS) |
| && (!IS_MCS(rspec[k]))) { |
| WL_ERROR(("wl%d: %s: IEEE80211_TX_RC_MCS != IS_MCS(rspec)\n", WLCWLUNIT(wlc), __func__)); |
| ASSERT(0 && "Rate mismatch"); |
| } |
| |
| if (IS_MCS(rspec[k])) { |
| preamble_type[k] = mimo_preamble_type; |
| |
| /* if SGI is selected, then forced mm for single stream */ |
| if ((rspec[k] & RSPEC_SHORT_GI) |
| && IS_SINGLE_STREAM(rspec[k] & |
| RSPEC_RATE_MASK)) { |
| preamble_type[k] = WLC_MM_PREAMBLE; |
| } |
| } |
| |
| /* mimo bw field MUST now be valid in the rspec (it affects duration calculations) */ |
| ASSERT(VALID_RATE_DBG(wlc, rspec[0])); |
| |
| /* should be better conditionalized */ |
| if (!IS_MCS(rspec[0]) |
| && (tx_info->control.rates[0]. |
| flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE)) |
| preamble_type[k] = WLC_SHORT_PREAMBLE; |
| |
| ASSERT(!IS_MCS(rspec[0]) |
| || WLC_IS_MIMO_PREAMBLE(preamble_type[k])); |
| } |
| } else { |
| for (k = 0; k < hw->max_rates; k++) { |
| /* Set ctrlchbw as 20Mhz */ |
| ASSERT(!IS_MCS(rspec[k])); |
| rspec[k] &= ~RSPEC_BW_MASK; |
| rspec[k] |= (PHY_TXC1_BW_20MHZ << RSPEC_BW_SHIFT); |
| |
| /* for nphy, stf of ofdm frames must follow policies */ |
| if (WLCISNPHY(wlc->band) && IS_OFDM(rspec[k])) { |
| rspec[k] &= ~RSPEC_STF_MASK; |
| rspec[k] |= phyctl1_stf << RSPEC_STF_SHIFT; |
| } |
| } |
| } |
| |
| /* Reset these for use with AMPDU's */ |
| txrate[0]->count = 0; |
| txrate[1]->count = 0; |
| |
| /* (3) PLCP: determine PLCP header and MAC duration, fill d11txh_t */ |
| wlc_compute_plcp(wlc, rspec[0], phylen, plcp); |
| wlc_compute_plcp(wlc, rspec[1], phylen, plcp_fallback); |
| bcopy(plcp_fallback, (char *)&txh->FragPLCPFallback, |
| sizeof(txh->FragPLCPFallback)); |
| |
| /* Length field now put in CCK FBR CRC field */ |
| if (IS_CCK(rspec[1])) { |
| txh->FragPLCPFallback[4] = phylen & 0xff; |
| txh->FragPLCPFallback[5] = (phylen & 0xff00) >> 8; |
| } |
| |
| /* MIMO-RATE: need validation ?? */ |
| mainrates = |
| IS_OFDM(rspec[0]) ? D11A_PHY_HDR_GRATE((ofdm_phy_hdr_t *) plcp) : |
| plcp[0]; |
| |
| /* DUR field for main rate */ |
| if ((fc != FC_PS_POLL) && !ETHER_ISMULTI(&h->a1) && !use_rifs) { |
| durid = |
| wlc_compute_frame_dur(wlc, rspec[0], preamble_type[0], |
| next_frag_len); |
| h->durid = htol16(durid); |
| } else if (use_rifs) { |
| /* NAV protect to end of next max packet size */ |
| durid = |
| (uint16) wlc_calc_frame_time(wlc, rspec[0], |
| preamble_type[0], |
| DOT11_MAX_FRAG_LEN); |
| durid += RIFS_11N_TIME; |
| h->durid = htol16(durid); |
| } |
| |
| /* DUR field for fallback rate */ |
| if (fc == FC_PS_POLL) |
| txh->FragDurFallback = h->durid; |
| else if (ETHER_ISMULTI(&h->a1) || use_rifs) |
| txh->FragDurFallback = 0; |
| else { |
| durid = wlc_compute_frame_dur(wlc, rspec[1], |
| preamble_type[1], next_frag_len); |
| txh->FragDurFallback = htol16(durid); |
| } |
| |
| /* (4) MAC-HDR: MacTxControlLow */ |
| if (frag == 0) |
| mcl |= TXC_STARTMSDU; |
| |
| if (!ETHER_ISMULTI(&h->a1)) |
| mcl |= TXC_IMMEDACK; |
| |
| if (BAND_5G(wlc->band->bandtype)) |
| mcl |= TXC_FREQBAND_5G; |
| |
| if (CHSPEC_IS40(WLC_BAND_PI_RADIO_CHANSPEC)) |
| mcl |= TXC_BW_40; |
| |
| /* set AMIC bit if using hardware TKIP MIC */ |
| if (hwtkmic) |
| mcl |= TXC_AMIC; |
| |
| txh->MacTxControlLow = htol16(mcl); |
| |
| /* MacTxControlHigh */ |
| mch = 0; |
| |
| /* Set fallback rate preamble type */ |
| if ((preamble_type[1] == WLC_SHORT_PREAMBLE) || |
| (preamble_type[1] == WLC_GF_PREAMBLE)) { |
| ASSERT((preamble_type[1] == WLC_GF_PREAMBLE) || |
| (!IS_MCS(rspec[1]))); |
| if (RSPEC2RATE(rspec[1]) != WLC_RATE_1M) |
| mch |= TXC_PREAMBLE_DATA_FB_SHORT; |
| } |
| |
| /* MacFrameControl */ |
| bcopy((char *)&h->fc, (char *)&txh->MacFrameControl, sizeof(uint16)); |
| |
| txh->TxFesTimeNormal = htol16(0); |
| |
| txh->TxFesTimeFallback = htol16(0); |
| |
| /* TxFrameRA */ |
| bcopy((char *)&h->a1, (char *)&txh->TxFrameRA, ETHER_ADDR_LEN); |
| |
| /* TxFrameID */ |
| txh->TxFrameID = htol16(frameid); |
| |
| /* TxStatus, Note the case of recreating the first frag of a suppressed frame |
| * then we may need to reset the retry cnt's via the status reg |
| */ |
| txh->TxStatus = htol16(status); |
| |
| if (D11REV_GE(wlc->pub->corerev, 16)) { |
| /* extra fields for ucode AMPDU aggregation, the new fields are added to |
| * the END of previous structure so that it's compatible in driver. |
| * In old rev ucode, these fields should be ignored |
| */ |
| txh->MaxNMpdus = htol16(0); |
| txh->MaxABytes_MRT = htol16(0); |
| txh->MaxABytes_FBR = htol16(0); |
| txh->MinMBytes = htol16(0); |
| } |
| |
| /* (5) RTS/CTS: determine RTS/CTS PLCP header and MAC duration, furnish d11txh_t */ |
| /* RTS PLCP header and RTS frame */ |
| if (use_rts || use_cts) { |
| if (use_rts && use_cts) |
| use_cts = FALSE; |
| |
| for (k = 0; k < 2; k++) { |
| rts_rspec[k] = wlc_rspec_to_rts_rspec(wlc, rspec[k], |
| FALSE, |
| mimo_ctlchbw); |
| } |
| |
| if (!IS_OFDM(rts_rspec[0]) && |
| !((RSPEC2RATE(rts_rspec[0]) == WLC_RATE_1M) || |
| (wlc->PLCPHdr_override == WLC_PLCP_LONG))) { |
| rts_preamble_type[0] = WLC_SHORT_PREAMBLE; |
| mch |= TXC_PREAMBLE_RTS_MAIN_SHORT; |
| } |
| |
| if (!IS_OFDM(rts_rspec[1]) && |
| !((RSPEC2RATE(rts_rspec[1]) == WLC_RATE_1M) || |
| (wlc->PLCPHdr_override == WLC_PLCP_LONG))) { |
| rts_preamble_type[1] = WLC_SHORT_PREAMBLE; |
| mch |= TXC_PREAMBLE_RTS_FB_SHORT; |
| } |
| |
| /* RTS/CTS additions to MacTxControlLow */ |
| if (use_cts) { |
| txh->MacTxControlLow |= htol16(TXC_SENDCTS); |
| } else { |
| txh->MacTxControlLow |= htol16(TXC_SENDRTS); |
| txh->MacTxControlLow |= htol16(TXC_LONGFRAME); |
| } |
| |
| /* RTS PLCP header */ |
| ASSERT(ISALIGNED((uintptr) txh->RTSPhyHeader, sizeof(uint16))); |
| rts_plcp = txh->RTSPhyHeader; |
| if (use_cts) |
| rts_phylen = DOT11_CTS_LEN + DOT11_FCS_LEN; |
| else |
| rts_phylen = DOT11_RTS_LEN + DOT11_FCS_LEN; |
| |
| wlc_compute_plcp(wlc, rts_rspec[0], rts_phylen, rts_plcp); |
| |
| /* fallback rate version of RTS PLCP header */ |
| wlc_compute_plcp(wlc, rts_rspec[1], rts_phylen, |
| rts_plcp_fallback); |
| bcopy(rts_plcp_fallback, (char *)&txh->RTSPLCPFallback, |
| sizeof(txh->RTSPLCPFallback)); |
| |
| /* RTS frame fields... */ |
| rts = (struct dot11_rts_frame *)&txh->rts_frame; |
| |
| durid = wlc_compute_rtscts_dur(wlc, use_cts, rts_rspec[0], |
| rspec[0], rts_preamble_type[0], |
| preamble_type[0], phylen, FALSE); |
| rts->durid = htol16(durid); |
| /* fallback rate version of RTS DUR field */ |
| durid = wlc_compute_rtscts_dur(wlc, use_cts, |
| rts_rspec[1], rspec[1], |
| rts_preamble_type[1], |
| preamble_type[1], phylen, FALSE); |
| txh->RTSDurFallback = htol16(durid); |
| |
| if (use_cts) { |
| rts->fc = htol16(FC_CTS); |
| bcopy((char *)&h->a2, (char *)&rts->ra, ETHER_ADDR_LEN); |
| } else { |
| rts->fc = htol16((uint16) FC_RTS); |
| bcopy((char *)&h->a1, (char *)&rts->ra, |
| 2 * ETHER_ADDR_LEN); |
| } |
| |
| /* mainrate |
| * low 8 bits: main frag rate/mcs, |
| * high 8 bits: rts/cts rate/mcs |
| */ |
| mainrates |= (IS_OFDM(rts_rspec[0]) ? |
| D11A_PHY_HDR_GRATE((ofdm_phy_hdr_t *) rts_plcp) : |
| rts_plcp[0]) << 8; |
| } else { |
| bzero((char *)txh->RTSPhyHeader, D11_PHY_HDR_LEN); |
| bzero((char *)&txh->rts_frame, sizeof(struct dot11_rts_frame)); |
| bzero((char *)txh->RTSPLCPFallback, |
| sizeof(txh->RTSPLCPFallback)); |
| txh->RTSDurFallback = 0; |
| } |
| |
| #ifdef SUPPORT_40MHZ |
| /* add null delimiter count */ |
| if ((tx_info->flags & IEEE80211_TX_CTL_AMPDU) && IS_MCS(rspec)) { |
| txh->RTSPLCPFallback[AMPDU_FBR_NULL_DELIM] = |
| wlc_ampdu_null_delim_cnt(wlc->ampdu, scb, rspec, phylen); |
| } |
| #endif |
| |
| /* Now that RTS/RTS FB preamble types are updated, write the final value */ |
| txh->MacTxControlHigh = htol16(mch); |
| |
| /* MainRates (both the rts and frag plcp rates have been calculated now) */ |
| txh->MainRates = htol16(mainrates); |
| |
| /* XtraFrameTypes */ |
| xfts = FRAMETYPE(rspec[1], wlc->mimoft); |
| xfts |= (FRAMETYPE(rts_rspec[0], wlc->mimoft) << XFTS_RTS_FT_SHIFT); |
| xfts |= (FRAMETYPE(rts_rspec[1], wlc->mimoft) << XFTS_FBRRTS_FT_SHIFT); |
| xfts |= |
| CHSPEC_CHANNEL(WLC_BAND_PI_RADIO_CHANSPEC) << XFTS_CHANNEL_SHIFT; |
| txh->XtraFrameTypes = htol16(xfts); |
| |
| /* PhyTxControlWord */ |
| phyctl = FRAMETYPE(rspec[0], wlc->mimoft); |
| if ((preamble_type[0] == WLC_SHORT_PREAMBLE) || |
| (preamble_type[0] == WLC_GF_PREAMBLE)) { |
| ASSERT((preamble_type[0] == WLC_GF_PREAMBLE) |
| || !IS_MCS(rspec[0])); |
| if (RSPEC2RATE(rspec[0]) != WLC_RATE_1M) |
| phyctl |= PHY_TXC_SHORT_HDR; |
| WLCNTINCR(wlc->pub->_cnt->txprshort); |
| } |
| |
| /* phytxant is properly bit shifted */ |
| phyctl |= wlc_stf_d11hdrs_phyctl_txant(wlc, rspec[0]); |
| txh->PhyTxControlWord = htol16(phyctl); |
| |
| /* PhyTxControlWord_1 */ |
| if (WLC_PHY_11N_CAP(wlc->band)) { |
| uint16 phyctl1 = 0; |
| |
| phyctl1 = wlc_phytxctl1_calc(wlc, rspec[0]); |
| txh->PhyTxControlWord_1 = htol16(phyctl1); |
| phyctl1 = wlc_phytxctl1_calc(wlc, rspec[1]); |
| txh->PhyTxControlWord_1_Fbr = htol16(phyctl1); |
| |
| if (use_rts || use_cts) { |
| phyctl1 = wlc_phytxctl1_calc(wlc, rts_rspec[0]); |
| txh->PhyTxControlWord_1_Rts = htol16(phyctl1); |
| phyctl1 = wlc_phytxctl1_calc(wlc, rts_rspec[1]); |
| txh->PhyTxControlWord_1_FbrRts = htol16(phyctl1); |
| } |
| |
| /* |
| * For mcs frames, if mixedmode(overloaded with long preamble) is going to be set, |
| * fill in non-zero MModeLen and/or MModeFbrLen |
| * it will be unnecessary if they are separated |
| */ |
| if (IS_MCS(rspec[0]) && (preamble_type[0] == WLC_MM_PREAMBLE)) { |
| uint16 mmodelen = |
| wlc_calc_lsig_len(wlc, rspec[0], phylen); |
| txh->MModeLen = htol16(mmodelen); |
| } |
| |
| if (IS_MCS(rspec[1]) && (preamble_type[1] == WLC_MM_PREAMBLE)) { |
| uint16 mmodefbrlen = |
| wlc_calc_lsig_len(wlc, rspec[1], phylen); |
| txh->MModeFbrLen = htol16(mmodefbrlen); |
| } |
| } |
| |
| if (IS_MCS(rspec[0])) |
| ASSERT(IS_MCS(rspec[1])); |
| |
| ASSERT(!IS_MCS(rspec[0]) || |
| ((preamble_type[0] == WLC_MM_PREAMBLE) == (txh->MModeLen != 0))); |
| ASSERT(!IS_MCS(rspec[1]) || |
| ((preamble_type[1] == WLC_MM_PREAMBLE) == |
| (txh->MModeFbrLen != 0))); |
| |
| ac = wme_fifo2ac[queue]; |
| if (SCB_WME(scb) && qos && wlc->edcf_txop[ac]) { |
| uint frag_dur, dur, dur_fallback; |
| |
| ASSERT(!ETHER_ISMULTI(&h->a1)); |
| |
| /* WME: Update TXOP threshold */ |
| if ((!(tx_info->flags & IEEE80211_TX_CTL_AMPDU)) && (frag == 0)) { |
| frag_dur = |
| wlc_calc_frame_time(wlc, rspec[0], preamble_type[0], |
| phylen); |
| |
| if (rts) { |
| /* 1 RTS or CTS-to-self frame */ |
| dur = |
| wlc_calc_cts_time(wlc, rts_rspec[0], |
| rts_preamble_type[0]); |
| dur_fallback = |
| wlc_calc_cts_time(wlc, rts_rspec[1], |
| rts_preamble_type[1]); |
| /* (SIFS + CTS) + SIFS + frame + SIFS + ACK */ |
| dur += ltoh16(rts->durid); |
| dur_fallback += ltoh16(txh->RTSDurFallback); |
| } else if (use_rifs) { |
| dur = frag_dur; |
| dur_fallback = 0; |
| } else { |
| /* frame + SIFS + ACK */ |
| dur = frag_dur; |
| dur += |
| wlc_compute_frame_dur(wlc, rspec[0], |
| preamble_type[0], 0); |
| |
| dur_fallback = |
| wlc_calc_frame_time(wlc, rspec[1], |
| preamble_type[1], |
| phylen); |
| dur_fallback += |
| wlc_compute_frame_dur(wlc, rspec[1], |
| preamble_type[1], 0); |
| } |
| /* NEED to set TxFesTimeNormal (hard) */ |
| txh->TxFesTimeNormal = htol16((uint16) dur); |
| /* NEED to set fallback rate version of TxFesTimeNormal (hard) */ |
| txh->TxFesTimeFallback = htol16((uint16) dur_fallback); |
| |
| /* update txop byte threshold (txop minus intraframe overhead) */ |
| if (wlc->edcf_txop[ac] >= (dur - frag_dur)) { |
| { |
| uint newfragthresh; |
| |
| newfragthresh = |
| wlc_calc_frame_len(wlc, rspec[0], |
| preamble_type[0], |
| (wlc-> |
| edcf_txop[ac] - |
| (dur - |
| frag_dur))); |
| /* range bound the fragthreshold */ |
| if (newfragthresh < DOT11_MIN_FRAG_LEN) |
| newfragthresh = |
| DOT11_MIN_FRAG_LEN; |
| else if (newfragthresh > |
| wlc->usr_fragthresh) |
| newfragthresh = |
| wlc->usr_fragthresh; |
| /* update the fragthresh and do txc update */ |
| if (wlc->fragthresh[queue] != |
| (uint16) newfragthresh) { |
| wlc->fragthresh[queue] = |
| (uint16) newfragthresh; |
| } |
| } |
| } else |
| WL_ERROR(("wl%d: %s txop invalid for rate %d\n", |
| wlc->pub->unit, fifo_names[queue], |
| RSPEC2RATE(rspec[0]))); |
| |
| if (dur > wlc->edcf_txop[ac]) |
| WL_ERROR(("wl%d: %s: %s txop exceeded phylen %d/%d dur %d/%d\n", wlc->pub->unit, __func__, fifo_names[queue], phylen, wlc->fragthresh[queue], dur, wlc->edcf_txop[ac])); |
| } |
| } |
| |
| return 0; |
| } |
| |
| void wlc_tbtt(wlc_info_t *wlc, d11regs_t *regs) |
| { |
| wlc_bsscfg_t *cfg = wlc->cfg; |
| |
| WLCNTINCR(wlc->pub->_cnt->tbtt); |
| |
| if (BSSCFG_STA(cfg)) { |
| /* run watchdog here if the watchdog timer is not armed */ |
| if (WLC_WATCHDOG_TBTT(wlc)) { |
| uint32 cur, delta; |
| if (wlc->WDarmed) { |
| wl_del_timer(wlc->wl, wlc->wdtimer); |
| wlc->WDarmed = FALSE; |
| } |
| |
| cur = OSL_SYSUPTIME(); |
| delta = cur > wlc->WDlast ? cur - wlc->WDlast : |
| (uint32) ~0 - wlc->WDlast + cur + 1; |
| if (delta >= TIMER_INTERVAL_WATCHDOG) { |
| wlc_watchdog((void *)wlc); |
| wlc->WDlast = cur; |
| } |
| |
| wl_add_timer(wlc->wl, wlc->wdtimer, |
| wlc_watchdog_backup_bi(wlc), TRUE); |
| wlc->WDarmed = TRUE; |
| } |
| } |
| |
| if (!cfg->BSS) { |
| /* DirFrmQ is now valid...defer setting until end of ATIM window */ |
| wlc->qvalid |= MCMD_DIRFRMQVAL; |
| } |
| } |
| |
| /* GP timer is a freerunning 32 bit counter, decrements at 1 us rate */ |
| void wlc_hwtimer_gptimer_set(wlc_info_t *wlc, uint us) |
| { |
| ASSERT(wlc->pub->corerev >= 3); /* no gptimer in earlier revs */ |
| W_REG(wlc->osh, &wlc->regs->gptimer, us); |
| } |
| |
| void wlc_hwtimer_gptimer_abort(wlc_info_t *wlc) |
| { |
| ASSERT(wlc->pub->corerev >= 3); |
| W_REG(wlc->osh, &wlc->regs->gptimer, 0); |
| } |
| |
| static void wlc_hwtimer_gptimer_cb(wlc_info_t *wlc) |
| { |
| /* when interrupt is generated, the counter is loaded with last value |
| * written and continue to decrement. So it has to be cleaned first |
| */ |
| W_REG(wlc->osh, &wlc->regs->gptimer, 0); |
| } |
| |
| /* |
| * This fn has all the high level dpc processing from wlc_dpc. |
| * POLICY: no macinstatus change, no bounding loop. |
| * All dpc bounding should be handled in BMAC dpc, like txstatus and rxint |
| */ |
| void wlc_high_dpc(wlc_info_t *wlc, uint32 macintstatus) |
| { |
| d11regs_t *regs = wlc->regs; |
| #ifdef BCMDBG |
| char flagstr[128]; |
| static const bcm_bit_desc_t int_flags[] = { |
| {MI_MACSSPNDD, "MACSSPNDD"}, |
| {MI_BCNTPL, "BCNTPL"}, |
| {MI_TBTT, "TBTT"}, |
| {MI_BCNSUCCESS, "BCNSUCCESS"}, |
| {MI_BCNCANCLD, "BCNCANCLD"}, |
| {MI_ATIMWINEND, "ATIMWINEND"}, |
| {MI_PMQ, "PMQ"}, |
| {MI_NSPECGEN_0, "NSPECGEN_0"}, |
| {MI_NSPECGEN_1, "NSPECGEN_1"}, |
| {MI_MACTXERR, "MACTXERR"}, |
| {MI_NSPECGEN_3, "NSPECGEN_3"}, |
| {MI_PHYTXERR, "PHYTXERR"}, |
| {MI_PME, "PME"}, |
| {MI_GP0, "GP0"}, |
| {MI_GP1, "GP1"}, |
| {MI_DMAINT, "DMAINT"}, |
| {MI_TXSTOP, "TXSTOP"}, |
| {MI_CCA, "CCA"}, |
| {MI_BG_NOISE, "BG_NOISE"}, |
| {MI_DTIM_TBTT, "DTIM_TBTT"}, |
| {MI_PRQ, "PRQ"}, |
| {MI_PWRUP, "PWRUP"}, |
| {MI_RFDISABLE, "RFDISABLE"}, |
| {MI_TFS, "TFS"}, |
| {MI_PHYCHANGED, "PHYCHANGED"}, |
| {MI_TO, "TO"}, |
| {0, NULL} |
| }; |
| |
| if (macintstatus & ~(MI_TBTT | MI_TXSTOP)) { |
| bcm_format_flags(int_flags, macintstatus, flagstr, |
| sizeof(flagstr)); |
| WL_TRACE(("wl%d: macintstatus 0x%x %s\n", wlc->pub->unit, |
| macintstatus, flagstr)); |
| } |
| #endif /* BCMDBG */ |
| |
| if (macintstatus & MI_PRQ) { |
| /* Process probe request FIFO */ |
| ASSERT(0 && "PRQ Interrupt in non-MBSS"); |
| } |
| |
| /* TBTT indication */ |
| /* ucode only gives either TBTT or DTIM_TBTT, not both */ |
| if (macintstatus & (MI_TBTT | MI_DTIM_TBTT)) |
| wlc_tbtt(wlc, regs); |
| |
| if (macintstatus & MI_GP0) { |
| WL_ERROR(("wl%d: PSM microcode watchdog fired at %d (seconds). Resetting.\n", wlc->pub->unit, wlc->pub->now)); |
| |
| printk_once("%s : PSM Watchdog, chipid 0x%x, chiprev 0x%x\n", |
| __func__, CHIPID(wlc->pub->sih->chip), |
| CHIPREV(wlc->pub->sih->chiprev)); |
| |
| WLCNTINCR(wlc->pub->_cnt->psmwds); |
| |
| /* big hammer */ |
| wl_init(wlc->wl); |
| } |
| |
| /* gptimer timeout */ |
| if (macintstatus & MI_TO) { |
| wlc_hwtimer_gptimer_cb(wlc); |
| } |
| |
| if (macintstatus & MI_RFDISABLE) { |
| WL_ERROR(("wl%d: MAC Detected a change on the RF Disable Input 0x%x\n", wlc->pub->unit, R_REG(wlc->osh, ®s->phydebug) & PDBG_RFD)); |
| /* delay the cleanup to wl_down in IBSS case */ |
| if ((R_REG(wlc->osh, ®s->phydebug) & PDBG_RFD)) { |
| int idx; |
| wlc_bsscfg_t *bsscfg; |
| FOREACH_BSS(wlc, idx, bsscfg) { |
| if (!BSSCFG_STA(bsscfg) || !bsscfg->enable |
| || !bsscfg->BSS) |
| continue; |
| WL_ERROR(("wl%d: wlc_dpc: rfdisable -> wlc_bsscfg_disable()\n", wlc->pub->unit)); |
| } |
| } |
| } |
| |
| /* send any enq'd tx packets. Just makes sure to jump start tx */ |
| if (!pktq_empty(&wlc->active_queue->q)) |
| wlc_send_q(wlc, wlc->active_queue); |
| |
| #ifndef WLC_HIGH_ONLY |
| ASSERT(wlc_ps_check(wlc)); |
| #endif |
| } |
| |
| static void *wlc_15420war(wlc_info_t *wlc, uint queue) |
| { |
| hnddma_t *di; |
| void *p; |
| |
| ASSERT(queue < NFIFO); |
| |
| if ((D11REV_IS(wlc->pub->corerev, 4)) |
| || (D11REV_GT(wlc->pub->corerev, 6))) |
| return NULL; |
| |
| di = wlc->hw->di[queue]; |
| ASSERT(di != NULL); |
| |
| /* get next packet, ignoring XmtStatus.Curr */ |
| p = dma_getnexttxp(di, HNDDMA_RANGE_ALL); |
| |
| /* sw block tx dma */ |
| dma_txblock(di); |
| |
| /* if tx ring is now empty, reset and re-init the tx dma channel */ |
| if (dma_txactive(wlc->hw->di[queue]) == 0) { |
| WLCNTINCR(wlc->pub->_cnt->txdmawar); |
| if (!dma_txreset(di)) |
| WL_ERROR(("wl%d: %s: dma_txreset[%d]: cannot stop dma\n", wlc->pub->unit, __func__, queue)); |
| dma_txinit(di); |
| } |
| return p; |
| } |
| |
| static void wlc_war16165(wlc_info_t *wlc, bool tx) |
| { |
| if (tx) { |
| /* the post-increment is used in STAY_AWAKE macro */ |
| if (wlc->txpend16165war++ == 0) |
| wlc_set_ps_ctrl(wlc); |
| } else { |
| wlc->txpend16165war--; |
| if (wlc->txpend16165war == 0) |
| wlc_set_ps_ctrl(wlc); |
| } |
| } |
| |
| /* process an individual tx_status_t */ |
| /* WLC_HIGH_API */ |
| bool BCMFASTPATH |
| wlc_dotxstatus(wlc_info_t *wlc, tx_status_t *txs, uint32 frm_tx2) |
| { |
| void *p; |
| uint queue; |
| d11txh_t *txh; |
| struct scb *scb = NULL; |
| bool free_pdu; |
| osl_t *osh; |
| int tx_rts, tx_frame_count, tx_rts_count; |
| uint totlen, supr_status; |
| bool lastframe; |
| struct dot11_header *h; |
| uint16 fc; |
| uint16 mcl; |
| struct ieee80211_tx_info *tx_info; |
| struct ieee80211_tx_rate *txrate; |
| int i; |
| |
| (void)(frm_tx2); /* Compiler reference to avoid unused variable warning */ |
| |
| /* discard intermediate indications for ucode with one legitimate case: |
| * e.g. if "useRTS" is set. ucode did a successful rts/cts exchange, but the subsequent |
| * tx of DATA failed. so it will start rts/cts from the beginning (resetting the rts |
| * transmission count) |
| */ |
| if (!(txs->status & TX_STATUS_AMPDU) |
| && (txs->status & TX_STATUS_INTERMEDIATE)) { |
| WLCNTADD(wlc->pub->_cnt->txnoack, |
| ((txs-> |
| status & TX_STATUS_FRM_RTX_MASK) >> |
| TX_STATUS_FRM_RTX_SHIFT)); |
| WL_ERROR(("%s: INTERMEDIATE but not AMPDU\n", __func__)); |
| return FALSE; |
| } |
| |
| osh = wlc->osh; |
| queue = txs->frameid & TXFID_QUEUE_MASK; |
| ASSERT(queue < NFIFO); |
| if (queue >= NFIFO) { |
| p = NULL; |
| goto fatal; |
| } |
| |
| p = GETNEXTTXP(wlc, queue); |
| if (WLC_WAR16165(wlc)) |
| wlc_war16165(wlc, FALSE); |
| if (p == NULL) |
| p = wlc_15420war(wlc, queue); |
| ASSERT(p != NULL); |
| if (p == NULL) |
| goto fatal; |
| |
| txh = (d11txh_t *) PKTDATA(p); |
| mcl = ltoh16(txh->MacTxControlLow); |
| |
| if (txs->phyerr) { |
| WL_ERROR(("phyerr 0x%x, rate 0x%x\n", txs->phyerr, |
| txh->MainRates)); |
| wlc_print_txdesc(txh); |
| wlc_print_txstatus(txs); |
| } |
| |
| ASSERT(txs->frameid == htol16(txh->TxFrameID)); |
| if (txs->frameid != htol16(txh->TxFrameID)) |
| goto fatal; |
| |
| tx_info = IEEE80211_SKB_CB(p); |
| h = (struct dot11_header *)((u8 *) (txh + 1) + D11_PHY_HDR_LEN); |
| fc = ltoh16(h->fc); |
| |
| scb = (struct scb *)tx_info->control.sta->drv_priv; |
| |
| if (N_ENAB(wlc->pub)) { |
| u8 *plcp = (u8 *) (txh + 1); |
| if (PLCP3_ISSGI(plcp[3])) |
| WLCNTINCR(wlc->pub->_cnt->txmpdu_sgi); |
| if (PLCP3_ISSTBC(plcp[3])) |
| WLCNTINCR(wlc->pub->_cnt->txmpdu_stbc); |
| } |
| |
| if (tx_info->flags & IEEE80211_TX_CTL_AMPDU) { |
| ASSERT((mcl & TXC_AMPDU_MASK) != TXC_AMPDU_NONE); |
| wlc_ampdu_dotxstatus(wlc->ampdu, scb, p, txs); |
| return FALSE; |
| } |
| |
| supr_status = txs->status & TX_STATUS_SUPR_MASK; |
| if (supr_status == TX_STATUS_SUPR_BADCH) |
| WL_NONE(("%s: Pkt tx suppressed, possibly channel %d\n", |
| __func__, CHSPEC_CHANNEL(wlc->default_bss->chanspec))); |
| |
| tx_rts = htol16(txh->MacTxControlLow) & TXC_SENDRTS; |
| tx_frame_count = |
| (txs->status & TX_STATUS_FRM_RTX_MASK) >> TX_STATUS_FRM_RTX_SHIFT; |
| tx_rts_count = |
| (txs->status & TX_STATUS_RTS_RTX_MASK) >> TX_STATUS_RTS_RTX_SHIFT; |
| |
| lastframe = (fc & FC_MOREFRAG) == 0; |
| |
| if (!lastframe) { |
| WL_ERROR(("Not last frame!\n")); |
| } else { |
| uint16 sfbl, lfbl; |
| ieee80211_tx_info_clear_status(tx_info); |
| if (queue < AC_COUNT) { |
| sfbl = WLC_WME_RETRY_SFB_GET(wlc, wme_fifo2ac[queue]); |
| lfbl = WLC_WME_RETRY_LFB_GET(wlc, wme_fifo2ac[queue]); |
| } else { |
| sfbl = wlc->SFBL; |
| lfbl = wlc->LFBL; |
| } |
| |
| txrate = tx_info->status.rates; |
| /* FIXME: this should use a combination of sfbl, lfbl depending on frame length and RTS setting */ |
| if ((tx_frame_count > sfbl) && (txrate[1].idx >= 0)) { |
| /* rate selection requested a fallback rate and we used it */ |
| txrate->count = lfbl; |
| txrate[1].count = tx_frame_count - lfbl; |
| } else { |
| /* rate selection did not request fallback rate, or we didn't need it */ |
| txrate->count = tx_frame_count; |
| /* rc80211_minstrel.c:minstrel_tx_status() expects unused rates to be marked with idx = -1 */ |
| txrate[1].idx = -1; |
| txrate[1].count = 0; |
| } |
| |
| /* clear the rest of the rates */ |
| for (i = 2; i < IEEE80211_TX_MAX_RATES; i++) { |
| txrate[i].idx = -1; |
| txrate[i].count = 0; |
| } |
| |
| if (txs->status & TX_STATUS_ACK_RCV) |
| tx_info->flags |= IEEE80211_TX_STAT_ACK; |
| } |
| |
| totlen = pkttotlen(osh, p); |
| free_pdu = TRUE; |
| |
| wlc_txfifo_complete(wlc, queue, 1); |
| |
| if (lastframe) { |
| PKTSETNEXT(p, NULL); |
| PKTSETLINK(p, NULL); |
| wlc->txretried = 0; |
| /* remove PLCP & Broadcom tx descriptor header */ |
| PKTPULL(p, D11_PHY_HDR_LEN); |
| PKTPULL(p, D11_TXH_LEN); |
| ieee80211_tx_status_irqsafe(wlc->pub->ieee_hw, p); |
| WLCNTINCR(wlc->pub->_cnt->ieee_tx_status); |
| } else { |
| WL_ERROR(("%s: Not last frame => not calling tx_status\n", |
| __func__)); |
| } |
| |
| return FALSE; |
| |
| fatal: |
| ASSERT(0); |
| if (p) |
| PKTFREE(osh, p, TRUE); |
| |
| #ifdef WLC_HIGH_ONLY |
| /* If this is a split driver, do the big-hammer here. |
| * If this is a monolithic driver, wlc_bmac.c:wlc_dpc() will do the big-hammer. |
| */ |
| wl_init(wlc->wl); |
| #endif |
| return TRUE; |
| |
| } |
| |
| void BCMFASTPATH |
| wlc_txfifo_complete(wlc_info_t *wlc, uint fifo, s8 txpktpend) |
| { |
| TXPKTPENDDEC(wlc, fifo, txpktpend); |
| WL_TRACE(("wlc_txfifo_complete, pktpend dec %d to %d\n", txpktpend, |
| TXPKTPENDGET(wlc, fifo))); |
| |
| /* There is more room; mark precedences related to this FIFO sendable */ |
| WLC_TX_FIFO_ENAB(wlc, fifo); |
| ASSERT(TXPKTPENDGET(wlc, fifo) >= 0); |
| |
| if (!TXPKTPENDTOT(wlc)) { |
| if (wlc->block_datafifo & DATA_BLOCK_TX_SUPR) |
| wlc_bsscfg_tx_check(wlc); |
| } |
| |
| /* Clear MHF2_TXBCMC_NOW flag if BCMC fifo has drained */ |
| if (AP_ENAB(wlc->pub) && |
| wlc->bcmcfifo_drain && !TXPKTPENDGET(wlc, TX_BCMC_FIFO)) { |
| wlc->bcmcfifo_drain = FALSE; |
| wlc_mhf(wlc, MHF2, MHF2_TXBCMC_NOW, 0, WLC_BAND_AUTO); |
| } |
| |
| /* figure out which bsscfg is being worked on... */ |
| } |
| |
| /* Given the beacon interval in kus, and a 64 bit TSF in us, |
| * return the offset (in us) of the TSF from the last TBTT |
| */ |
| uint32 wlc_calc_tbtt_offset(uint32 bp, uint32 tsf_h, uint32 tsf_l) |
| { |
| uint32 k, btklo, btkhi, offset; |
| |
| /* TBTT is always an even multiple of the beacon_interval, |
| * so the TBTT less than or equal to the beacon timestamp is |
| * the beacon timestamp minus the beacon timestamp modulo |
| * the beacon interval. |
| * |
| * TBTT = BT - (BT % BIu) |
| * = (BTk - (BTk % BP)) * 2^10 |
| * |
| * BT = beacon timestamp (usec, 64bits) |
| * BTk = beacon timestamp (Kusec, 54bits) |
| * BP = beacon interval (Kusec, 16bits) |
| * BIu = BP * 2^10 = beacon interval (usec, 26bits) |
| * |
| * To keep the calculations in uint32s, the modulo operation |
| * on the high part of BT needs to be done in parts using the |
| * relations: |
| * X*Y mod Z = ((X mod Z) * (Y mod Z)) mod Z |
| * and |
| * (X + Y) mod Z = ((X mod Z) + (Y mod Z)) mod Z |
| * |
| * So, if BTk[n] = uint16 n [0,3] of BTk. |
| * BTk % BP = SUM((BTk[n] * 2^16n) % BP , 0<=n<4) % BP |
| * and the SUM term can be broken down: |
| * (BTk[n] * 2^16n) % BP |
| * (BTk[n] * (2^16n % BP)) % BP |
| * |
| * Create a set of power of 2 mod BP constants: |
| * K[n] = 2^(16n) % BP |
| * = (K[n-1] * 2^16) % BP |
| * K[2] = 2^32 % BP = ((2^16 % BP) * 2^16) % BP |
| * |
| * BTk % BP = BTk[0-1] % BP + |
| * (BTk[2] * K[2]) % BP + |
| * (BTk[3] * K[3]) % BP |
| * |
| * Since K[n] < 2^16 and BTk[n] is < 2^16, then BTk[n] * K[n] < 2^32 |
| */ |
| |
| /* BTk = BT >> 10, btklo = BTk[0-3], bkthi = BTk[4-6] */ |
| btklo = (tsf_h << 22) | (tsf_l >> 10); |
| btkhi = tsf_h >> 10; |
| |
| /* offset = BTk % BP */ |
| offset = btklo % bp; |
| |
| /* K[2] = ((2^16 % BP) * 2^16) % BP */ |
| k = (uint32) (1 << 16) % bp; |
| k = (uint32) (k * 1 << 16) % (uint32) bp; |
| |
| /* offset += (BTk[2] * K[2]) % BP */ |
| offset += ((btkhi & 0xffff) * k) % bp; |
| |
| /* BTk[3] */ |
| btkhi = btkhi >> 16; |
| |
| /* k[3] = (K[2] * 2^16) % BP */ |
| k = (k << 16) % bp; |
| |
| /* offset += (BTk[3] * K[3]) % BP */ |
| offset += ((btkhi & 0xffff) * k) % bp; |
| |
| offset = offset % bp; |
| |
| /* convert offset from kus to us by shifting up 10 bits and |
| * add in the low 10 bits of tsf that we ignored |
| */ |
| offset = (offset << 10) + (tsf_l & 0x3FF); |
| |
| return offset; |
| } |
| |
| /* Update beacon listen interval in shared memory */ |
| void wlc_bcn_li_upd(wlc_info_t *wlc) |
| { |
| if (AP_ENAB(wlc->pub)) |
| return; |
| |
| /* wake up every DTIM is the default */ |
| if (wlc->bcn_li_dtim == 1) |
| wlc_write_shm(wlc, M_BCN_LI, 0); |
| else |
| wlc_write_shm(wlc, M_BCN_LI, |
| (wlc->bcn_li_dtim << 8) | wlc->bcn_li_bcn); |
| } |
| |
| static void |
| prep_mac80211_status(wlc_info_t *wlc, d11rxhdr_t *rxh, void *p, |
| struct ieee80211_rx_status *rx_status) |
| { |
| uint32 tsf_l, tsf_h; |
| wlc_d11rxhdr_t *wlc_rxh = (wlc_d11rxhdr_t *) rxh; |
| int preamble; |
| int channel; |
| ratespec_t rspec; |
| unsigned char *plcp; |
| |
| wlc_read_tsf(wlc, &tsf_l, &tsf_h); /* mactime */ |
| rx_status->mactime = tsf_h; |
| rx_status->mactime <<= 32; |
| rx_status->mactime |= tsf_l; |
| rx_status->flag |= RX_FLAG_TSFT; |
| |
| channel = WLC_CHAN_CHANNEL(rxh->RxChan); |
| |
| /* XXX Channel/badn needs to be filtered against whether we are single/dual band card */ |
| if (channel > 14) { |
| rx_status->band = IEEE80211_BAND_5GHZ; |
| rx_status->freq = wf_channel2mhz(channel, WF_CHAN_FACTOR_5_G); |
| } else { |
| rx_status->band = IEEE80211_BAND_2GHZ; |
| rx_status->freq = wf_channel2mhz(channel, WF_CHAN_FACTOR_2_4_G); |
| } |
| |
| rx_status->signal = wlc_rxh->rssi; /* signal */ |
| |
| /* noise */ |
| /* qual */ |
| rx_status->antenna = (rxh->PhyRxStatus_0 & PRXS0_RXANT_UPSUBBAND) ? 1 : 0; /* ant */ |
| |
| plcp = PKTDATA(p); |
| |
| rspec = wlc_compute_rspec(rxh, plcp); |
| if (IS_MCS(rspec)) { |
| rx_status->rate_idx = rspec & RSPEC_RATE_MASK; |
| rx_status->flag |= RX_FLAG_HT; |
| if (RSPEC_IS40MHZ(rspec)) |
| rx_status->flag |= RX_FLAG_40MHZ; |
| } else { |
| switch (RSPEC2RATE(rspec)) { |
| case WLC_RATE_1M: |
| rx_status->rate_idx = 0; |
| break; |
| case WLC_RATE_2M: |
| rx_status->rate_idx = 1; |
| break; |
| case WLC_RATE_5M5: |
| rx_status->rate_idx = 2; |
| break; |
| case WLC_RATE_11M: |
| rx_status->rate_idx = 3; |
| break; |
| case WLC_RATE_6M: |
| rx_status->rate_idx = 4; |
| break; |
| case WLC_RATE_9M: |
| rx_status->rate_idx = 5; |
| break; |
| case WLC_RATE_12M: |
| rx_status->rate_idx = 6; |
| break; |
| case WLC_RATE_18M: |
| rx_status->rate_idx = 7; |
| break; |
| case WLC_RATE_24M: |
| rx_status->rate_idx = 8; |
| break; |
| case WLC_RATE_36M: |
| rx_status->rate_idx = 9; |
| break; |
| case WLC_RATE_48M: |
| rx_status->rate_idx = 10; |
| break; |
| case WLC_RATE_54M: |
| rx_status->rate_idx = 11; |
| break; |
| default: |
| WL_ERROR(("%s: Unknown rate\n", __func__)); |
| } |
| |
| /* Determine short preamble and rate_idx */ |
| preamble = 0; |
| if (IS_CCK(rspec)) { |
| if (rxh->PhyRxStatus_0 & PRXS0_SHORTH) |
| WL_ERROR(("Short CCK\n")); |
| rx_status->flag |= RX_FLAG_SHORTPRE; |
| } else if (IS_OFDM(rspec)) { |
| rx_status->flag |= RX_FLAG_SHORTPRE; |
| } else { |
| WL_ERROR(("%s: Unknown modulation\n", __func__)); |
| } |
| } |
| |
| if (PLCP3_ISSGI(plcp[3])) |
| rx_status->flag |= RX_FLAG_SHORT_GI; |
| |
| if (rxh->RxStatus1 & RXS_DECERR) { |
| rx_status->flag |= RX_FLAG_FAILED_PLCP_CRC; |
| WL_ERROR(("%s: RX_FLAG_FAILED_PLCP_CRC\n", __func__)); |
| } |
| if (rxh->RxStatus1 & RXS_FCSERR) { |
| rx_status->flag |= RX_FLAG_FAILED_FCS_CRC; |
| WL_ERROR(("%s: RX_FLAG_FAILED_FCS_CRC\n", __func__)); |
| } |
| } |
| |
| static void |
| wlc_recvctl(wlc_info_t *wlc, osl_t *osh, d11rxhdr_t *rxh, void *p) |
| { |
| int len_mpdu; |
| struct ieee80211_rx_status rx_status; |
| #if defined(BCMDBG) |
| struct sk_buff *skb = p; |
| #endif /* BCMDBG */ |
| /* Todo: |
| * Cache plcp for first MPDU of AMPD and use chacched version for INTERMEDIATE. |
| * Test for INTERMEDIATE like so: |
| * if (!(plcp[0] | plcp[1] | plcp[2])) |
| */ |
| |
| memset(&rx_status, 0, sizeof(rx_status)); |
| prep_mac80211_status(wlc, rxh, p, &rx_status); |
| |
| /* mac header+body length, exclude CRC and plcp header */ |
| len_mpdu = PKTLEN(p) - D11_PHY_HDR_LEN - DOT11_FCS_LEN; |
| PKTPULL(p, D11_PHY_HDR_LEN); |
| PKTSETLEN(p, len_mpdu); |
| |
| ASSERT(!PKTNEXT(p)); |
| ASSERT(!PKTLINK(p)); |
| |
| ASSERT(ISALIGNED((uintptr) skb->data, 2)); |
| |
| memcpy(IEEE80211_SKB_RXCB(p), &rx_status, sizeof(rx_status)); |
| ieee80211_rx_irqsafe(wlc->pub->ieee_hw, p); |
| |
| WLCNTINCR(wlc->pub->_cnt->ieee_rx); |
| PKTUNALLOC(osh); |
| return; |
| } |
| |
| void wlc_bss_list_free(wlc_info_t *wlc, wlc_bss_list_t *bss_list) |
| { |
| uint index; |
| wlc_bss_info_t *bi; |
| |
| if (!bss_list) { |
| WL_ERROR(("%s: Attempting to free NULL list\n", __func__)); |
| return; |
| } |
| /* inspect all BSS descriptor */ |
| for (index = 0; index < bss_list->count; index++) { |
| bi = bss_list->ptrs[index]; |
| if (bi) { |
| if (bi->bcn_prb) { |
| osl_mfree(wlc->osh, bi->bcn_prb, |
| bi->bcn_prb_len); |
| } |
| osl_mfree(wlc->osh, bi, sizeof(wlc_bss_info_t)); |
| bss_list->ptrs[index] = NULL; |
| } |
| } |
| bss_list->count = 0; |
| } |
| |
| /* Process received frames */ |
| /* |
| * Return TRUE if more frames need to be processed. FALSE otherwise. |
| * Param 'bound' indicates max. # frames to process before break out. |
| */ |
| /* WLC_HIGH_API */ |
| void BCMFASTPATH wlc_recv(wlc_info_t *wlc, void *p) |
| { |
| d11rxhdr_t *rxh; |
| struct dot11_header *h; |
| osl_t *osh; |
| uint16 fc; |
| uint len; |
| bool is_amsdu; |
| #ifdef BCMDBG |
| char eabuf[ETHER_ADDR_STR_LEN]; |
| #endif |
| |
| WL_TRACE(("wl%d: wlc_recv\n", wlc->pub->unit)); |
| |
| osh = wlc->osh; |
| |
| /* frame starts with rxhdr */ |
| rxh = (d11rxhdr_t *) PKTDATA(p); |
| |
| /* strip off rxhdr */ |
| PKTPULL(p, wlc->hwrxoff); |
| |
| /* fixup rx header endianness */ |
| ltoh16_buf((void *)rxh, sizeof(d11rxhdr_t)); |
| |
| /* MAC inserts 2 pad bytes for a4 headers or QoS or A-MSDU subframes */ |
| if (rxh->RxStatus1 & RXS_PBPRES) { |
| if (PKTLEN(p) < 2) { |
| WLCNTINCR(wlc->pub->_cnt->rxrunt); |
| WL_ERROR(("wl%d: wlc_recv: rcvd runt of len %d\n", |
| wlc->pub->unit, PKTLEN(p))); |
| goto toss; |
| } |
| PKTPULL(p, 2); |
| } |
| |
| h = (struct dot11_header *)(PKTDATA(p) + D11_PHY_HDR_LEN); |
| len = PKTLEN(p); |
| |
| if (rxh->RxStatus1 & RXS_FCSERR) { |
| if (wlc->pub->mac80211_state & MAC80211_PROMISC_BCNS) { |
| WL_ERROR(("FCSERR while scanning******* - tossing\n")); |
| goto toss; |
| } else { |
| WL_ERROR(("RCSERR!!!\n")); |
| goto toss; |
| } |
| } |
| |
| /* check received pkt has at least frame control field */ |
| if (len >= D11_PHY_HDR_LEN + sizeof(h->fc)) { |
| fc = ltoh16(h->fc); |
| } else { |
| WLCNTINCR(wlc->pub->_cnt->rxrunt); |
| goto toss; |
| } |
| |
| is_amsdu = rxh->RxStatus2 & RXS_AMSDU_MASK; |
| |
| /* explicitly test bad src address to avoid sending bad deauth */ |
| if (!is_amsdu) { |
| /* CTS and ACK CTL frames are w/o a2 */ |
| if (FC_TYPE(fc) == FC_TYPE_DATA || FC_TYPE(fc) == FC_TYPE_MNG) { |
| if ((ETHER_ISNULLADDR(&h->a2) || ETHER_ISMULTI(&h->a2))) { |
| WL_ERROR(("wl%d: %s: dropping a frame with invalid" " src mac address, a2: %s\n", wlc->pub->unit, __func__, bcm_ether_ntoa(&h->a2, eabuf))); |
| WLCNTINCR(wlc->pub->_cnt->rxbadsrcmac); |
| goto toss; |
| } |
| WLCNTINCR(wlc->pub->_cnt->rxfrag); |
| } |
| } |
| |
| /* due to sheer numbers, toss out probe reqs for now */ |
| if (FC_TYPE(fc) == FC_TYPE_MNG) { |
| if ((fc & FC_KIND_MASK) == FC_PROBE_REQ) |
| goto toss; |
| } |
| |
| if (is_amsdu) { |
| WL_ERROR(("%s: is_amsdu causing toss\n", __func__)); |
| goto toss; |
| } |
| |
| wlc_recvctl(wlc, osh, rxh, p); |
| return; |
| |
| toss: |
| PKTFREE(osh, p, FALSE); |
| } |
| |
| /* calculate frame duration for Mixed-mode L-SIG spoofing, return |
| * number of bytes goes in the length field |
| * |
| * Formula given by HT PHY Spec v 1.13 |
| * len = 3(nsyms + nstream + 3) - 3 |
| */ |
| uint16 BCMFASTPATH |
| wlc_calc_lsig_len(wlc_info_t *wlc, ratespec_t ratespec, uint mac_len) |
| { |
| uint nsyms, len = 0, kNdps; |
| |
| WL_TRACE(("wl%d: wlc_calc_lsig_len: rate %d, len%d\n", wlc->pub->unit, |
| RSPEC2RATE(ratespec), mac_len)); |
| |
| if (IS_MCS(ratespec)) { |
| uint mcs = ratespec & RSPEC_RATE_MASK; |
| /* MCS_TXS(mcs) returns num tx streams - 1 */ |
| int tot_streams = (MCS_TXS(mcs) + 1) + RSPEC_STC(ratespec); |
| |
| ASSERT(WLC_PHY_11N_CAP(wlc->band)); |
| /* the payload duration calculation matches that of regular ofdm */ |
| /* 1000Ndbps = kbps * 4 */ |
| kNdps = |
| MCS_RATE(mcs, RSPEC_IS40MHZ(ratespec), |
| RSPEC_ISSGI(ratespec)) * 4; |
| |
| if (RSPEC_STC(ratespec) == 0) |
| /* NSyms = CEILING((SERVICE + 8*NBytes + TAIL) / Ndbps) */ |
| nsyms = |
| CEIL((APHY_SERVICE_NBITS + 8 * mac_len + |
| APHY_TAIL_NBITS) * 1000, kNdps); |
| else |
| /* STBC needs to have even number of symbols */ |
| nsyms = |
| 2 * |
| CEIL((APHY_SERVICE_NBITS + 8 * mac_len + |
| APHY_TAIL_NBITS) * 1000, 2 * kNdps); |
| |
| nsyms += (tot_streams + 3); /* (+3) account for HT-SIG(2) and HT-STF(1) */ |
| /* 3 bytes/symbol @ legacy 6Mbps rate */ |
| len = (3 * nsyms) - 3; /* (-3) excluding service bits and tail bits */ |
| } |
| |
| return (uint16) len; |
| } |
| |
| /* calculate frame duration of a given rate and length, return time in usec unit */ |
| uint BCMFASTPATH |
| wlc_calc_frame_time(wlc_info_t *wlc, ratespec_t ratespec, u8 preamble_type, |
| uint mac_len) |
| { |
| uint nsyms, dur = 0, Ndps, kNdps; |
| uint rate = RSPEC2RATE(ratespec); |
| |
| if (rate == 0) { |
| ASSERT(0); |
| WL_ERROR(("wl%d: WAR: using rate of 1 mbps\n", wlc->pub->unit)); |
| rate = WLC_RATE_1M; |
| } |
| |
| WL_TRACE(("wl%d: wlc_calc_frame_time: rspec 0x%x, preamble_type %d, len%d\n", wlc->pub->unit, ratespec, preamble_type, mac_len)); |
| |
| if (IS_MCS(ratespec)) { |
| uint mcs = ratespec & RSPEC_RATE_MASK; |
| int tot_streams = MCS_TXS(mcs) + RSPEC_STC(ratespec); |
| ASSERT(WLC_PHY_11N_CAP(wlc->band)); |
| ASSERT(WLC_IS_MIMO_PREAMBLE(preamble_type)); |
| |
| dur = PREN_PREAMBLE + (tot_streams * PREN_PREAMBLE_EXT); |
| if (preamble_type == WLC_MM_PREAMBLE) |
| dur += PREN_MM_EXT; |
| /* 1000Ndbps = kbps * 4 */ |
| kNdps = |
| MCS_RATE(mcs, RSPEC_IS40MHZ(ratespec), |
| RSPEC_ISSGI(ratespec)) * 4; |
| |
| if (RSPEC_STC(ratespec) == 0) |
| /* NSyms = CEILING((SERVICE + 8*NBytes + TAIL) / Ndbps) */ |
| nsyms = |
| CEIL((APHY_SERVICE_NBITS + 8 * mac_len + |
| APHY_TAIL_NBITS) * 1000, kNdps); |
| else |
| /* STBC needs to have even number of symbols */ |
| nsyms = |
| 2 * |
| CEIL((APHY_SERVICE_NBITS + 8 * mac_len + |
| APHY_TAIL_NBITS) * 1000, 2 * kNdps); |
| |
| dur += APHY_SYMBOL_TIME * nsyms; |
| if (BAND_2G(wlc->band->bandtype)) |
| dur += DOT11_OFDM_SIGNAL_EXTENSION; |
| } else if (IS_OFDM(rate)) { |
| dur = APHY_PREAMBLE_TIME; |
| dur += APHY_SIGNAL_TIME; |
| /* Ndbps = Mbps * 4 = rate(500Kbps) * 2 */ |
| Ndps = rate * 2; |
| /* NSyms = CEILING((SERVICE + 8*NBytes + TAIL) / Ndbps) */ |
| nsyms = |
| CEIL((APHY_SERVICE_NBITS + 8 * mac_len + APHY_TAIL_NBITS), |
| Ndps); |
| dur += APHY_SYMBOL_TIME * nsyms; |
| if (BAND_2G(wlc->band->bandtype)) |
| dur += DOT11_OFDM_SIGNAL_EXTENSION; |
| } else { |
| /* calc # bits * 2 so factor of 2 in rate (1/2 mbps) will divide out */ |
| mac_len = mac_len * 8 * 2; |
| /* calc ceiling of bits/rate = microseconds of air time */ |
| dur = (mac_len + rate - 1) / rate; |
| if (preamble_type & WLC_SHORT_PREAMBLE) |
| dur += BPHY_PLCP_SHORT_TIME; |
| else |
| dur += BPHY_PLCP_TIME; |
| } |
| return dur; |
| } |
| |
| /* The opposite of wlc_calc_frame_time */ |
| static uint |
| wlc_calc_frame_len(wlc_info_t *wlc, ratespec_t ratespec, u8 preamble_type, |
| uint dur) |
| { |
| uint nsyms, mac_len, Ndps, kNdps; |
| uint rate = RSPEC2RATE(ratespec); |
| |
| WL_TRACE(("wl%d: wlc_calc_frame_len: rspec 0x%x, preamble_type %d, dur %d\n", wlc->pub->unit, ratespec, preamble_type, dur)); |
| |
| if (IS_MCS(ratespec)) { |
| uint mcs = ratespec & RSPEC_RATE_MASK; |
| int tot_streams = MCS_TXS(mcs) + RSPEC_STC(ratespec); |
| ASSERT(WLC_PHY_11N_CAP(wlc->band)); |
| dur -= PREN_PREAMBLE + (tot_streams * PREN_PREAMBLE_EXT); |
| /* payload calculation matches that of regular ofdm */ |
| if (BAND_2G(wlc->band->bandtype)) |
| dur -= DOT11_OFDM_SIGNAL_EXTENSION; |
| /* kNdbps = kbps * 4 */ |
| kNdps = |
| MCS_RATE(mcs, RSPEC_IS40MHZ(ratespec), |
| RSPEC_ISSGI(ratespec)) * 4; |
| nsyms = dur / APHY_SYMBOL_TIME; |
| mac_len = |
| ((nsyms * kNdps) - |
| ((APHY_SERVICE_NBITS + APHY_TAIL_NBITS) * 1000)) / 8000; |
| } else if (IS_OFDM(ratespec)) { |
| dur -= APHY_PREAMBLE_TIME; |
| dur -= APHY_SIGNAL_TIME; |
| /* Ndbps = Mbps * 4 = rate(500Kbps) * 2 */ |
| Ndps = rate * 2; |
| nsyms = dur / APHY_SYMBOL_TIME; |
| mac_len = |
| ((nsyms * Ndps) - |
| (APHY_SERVICE_NBITS + APHY_TAIL_NBITS)) / 8; |
| } else { |
| if (preamble_type & WLC_SHORT_PREAMBLE) |
| dur -= BPHY_PLCP_SHORT_TIME; |
| else |
| dur -= BPHY_PLCP_TIME; |
| mac_len = dur * rate; |
| /* divide out factor of 2 in rate (1/2 mbps) */ |
| mac_len = mac_len / 8 / 2; |
| } |
| return mac_len; |
| } |
| |
| static uint |
| wlc_calc_ba_time(wlc_info_t *wlc, ratespec_t rspec, u8 preamble_type) |
| { |
| WL_TRACE(("wl%d: wlc_calc_ba_time: rspec 0x%x, preamble_type %d\n", |
| wlc->pub->unit, rspec, preamble_type)); |
| /* Spec 9.6: ack rate is the highest rate in BSSBasicRateSet that is less than |
| * or equal to the rate of the immediately previous frame in the FES |
| */ |
| rspec = WLC_BASIC_RATE(wlc, rspec); |
| ASSERT(VALID_RATE_DBG(wlc, rspec)); |
| |
| /* BA len == 32 == 16(ctl hdr) + 4(ba len) + 8(bitmap) + 4(fcs) */ |
| return wlc_calc_frame_time(wlc, rspec, preamble_type, |
| (DOT11_BA_LEN + DOT11_BA_BITMAP_LEN + |
| DOT11_FCS_LEN)); |
| } |
| |
| static uint BCMFASTPATH |
| wlc_calc_ack_time(wlc_info_t *wlc, ratespec_t rspec, u8 preamble_type) |
| { |
| uint dur = 0; |
| |
| WL_TRACE(("wl%d: wlc_calc_ack_time: rspec 0x%x, preamble_type %d\n", |
| wlc->pub->unit, rspec, preamble_type)); |
| /* Spec 9.6: ack rate is the highest rate in BSSBasicRateSet that is less than |
| * or equal to the rate of the immediately previous frame in the FES |
| */ |
| rspec = WLC_BASIC_RATE(wlc, rspec); |
| ASSERT(VALID_RATE_DBG(wlc, rspec)); |
| |
| /* ACK frame len == 14 == 2(fc) + 2(dur) + 6(ra) + 4(fcs) */ |
| dur = |
| wlc_calc_frame_time(wlc, rspec, preamble_type, |
| (DOT11_ACK_LEN + DOT11_FCS_LEN)); |
| return dur; |
| } |
| |
| static uint |
| wlc_calc_cts_time(wlc_info_t *wlc, ratespec_t rspec, u8 preamble_type) |
| { |
| WL_TRACE(("wl%d: wlc_calc_cts_time: ratespec 0x%x, preamble_type %d\n", |
| wlc->pub->unit, rspec, preamble_type)); |
| return wlc_calc_ack_time(wlc, rspec, preamble_type); |
| } |
| |
| /* derive wlc->band->basic_rate[] table from 'rateset' */ |
| void wlc_rate_lookup_init(wlc_info_t *wlc, wlc_rateset_t *rateset) |
| { |
| u8 rate; |
| u8 mandatory; |
| u8 cck_basic = 0; |
| u8 ofdm_basic = 0; |
| u8 *br = wlc->band->basic_rate; |
| uint i; |
| |
| /* incoming rates are in 500kbps units as in 802.11 Supported Rates */ |
| bzero(br, WLC_MAXRATE + 1); |
| |
| /* For each basic rate in the rates list, make an entry in the |
| * best basic lookup. |
| */ |
| for (i = 0; i < rateset->count; i++) { |
| /* only make an entry for a basic rate */ |
| if (!(rateset->rates[i] & WLC_RATE_FLAG)) |
| continue; |
| |
| /* mask off basic bit */ |
| rate = (rateset->rates[i] & RATE_MASK); |
| |
| if (rate > WLC_MAXRATE) { |
| WL_ERROR(("wlc_rate_lookup_init: invalid rate 0x%X in rate set\n", rateset->rates[i])); |
| continue; |
| } |
| |
| br[rate] = rate; |
| } |
| |
| /* The rate lookup table now has non-zero entries for each |
| * basic rate, equal to the basic rate: br[basicN] = basicN |
| * |
| * To look up the best basic rate corresponding to any |
| * particular rate, code can use the basic_rate table |
| * like this |
| * |
| * basic_rate = wlc->band->basic_rate[tx_rate] |
| * |
| * Make sure there is a best basic rate entry for |
| * every rate by walking up the table from low rates |
| * to high, filling in holes in the lookup table |
| */ |
| |
| for (i = 0; i < wlc->band->hw_rateset.count; i++) { |
| rate = wlc->band->hw_rateset.rates[i]; |
| ASSERT(rate <= WLC_MAXRATE); |
| |
| if (br[rate] != 0) { |
| /* This rate is a basic rate. |
| * Keep track of the best basic rate so far by |
| * modulation type. |
| */ |
| if (IS_OFDM(rate)) |
| ofdm_basic = rate; |
| else |
| cck_basic = rate; |
| |
| continue; |
| } |
| |
| /* This rate is not a basic rate so figure out the |
| * best basic rate less than this rate and fill in |
| * the hole in the table |
| */ |
| |
| br[rate] = IS_OFDM(rate) ? ofdm_basic : cck_basic; |
| |
| if (br[rate] != 0) |
| continue; |
| |
| if (IS_OFDM(rate)) { |
| /* In 11g and 11a, the OFDM mandatory rates are 6, 12, and 24 Mbps */ |
| if (rate >= WLC_RATE_24M) |
| mandatory = WLC_RATE_24M; |
| else if (rate >= WLC_RATE_12M) |
| mandatory = WLC_RATE_12M; |
| else |
| mandatory = WLC_RATE_6M; |
| } else { |
| /* In 11b, all the CCK rates are mandatory 1 - 11 Mbps */ |
| mandatory = rate; |
| } |
| |
| br[rate] = mandatory; |
| } |
| } |
| |
| static void wlc_write_rate_shm(wlc_info_t *wlc, u8 rate, u8 basic_rate) |
| { |
| u8 phy_rate, index; |
| u8 basic_phy_rate, basic_index; |
| uint16 dir_table, basic_table; |
| uint16 basic_ptr; |
| |
| /* Shared memory address for the table we are reading */ |
| dir_table = IS_OFDM(basic_rate) ? M_RT_DIRMAP_A : M_RT_DIRMAP_B; |
| |
| /* Shared memory address for the table we are writing */ |
| basic_table = IS_OFDM(rate) ? M_RT_BBRSMAP_A : M_RT_BBRSMAP_B; |
| |
| /* |
| * for a given rate, the LS-nibble of the PLCP SIGNAL field is |
| * the index into the rate table. |
| */ |
| phy_rate = rate_info[rate] & RATE_MASK; |
| basic_phy_rate = rate_info[basic_rate] & RATE_MASK; |
| index = phy_rate & 0xf; |
| basic_index = basic_phy_rate & 0xf; |
| |
| /* Find the SHM pointer to the ACK rate entry by looking in the |
| * Direct-map Table |
| */ |
| basic_ptr = wlc_read_shm(wlc, (dir_table + basic_index * 2)); |
| |
| /* Update the SHM BSS-basic-rate-set mapping table with the pointer |
| * to the correct basic rate for the given incoming rate |
| */ |
| wlc_write_shm(wlc, (basic_table + index * 2), basic_ptr); |
| } |
| |
| static const wlc_rateset_t *wlc_rateset_get_hwrs(wlc_info_t *wlc) |
| { |
| const wlc_rateset_t *rs_dflt; |
| |
| if (WLC_PHY_11N_CAP(wlc->band)) { |
| if (BAND_5G(wlc->band->bandtype)) |
| rs_dflt = &ofdm_mimo_rates; |
| else |
| rs_dflt = &cck_ofdm_mimo_rates; |
| } else if (wlc->band->gmode) |
| rs_dflt = &cck_ofdm_rates; |
| else |
| rs_dflt = &cck_rates; |
| |
| return rs_dflt; |
| } |
| |
| void wlc_set_ratetable(wlc_info_t *wlc) |
| { |
| const wlc_rateset_t *rs_dflt; |
| wlc_rateset_t rs; |
| u8 rate, basic_rate; |
| uint i; |
| |
| rs_dflt = wlc_rateset_get_hwrs(wlc); |
| ASSERT(rs_dflt != NULL); |
| |
| wlc_rateset_copy(rs_dflt, &rs); |
| wlc_rateset_mcs_upd(&rs, wlc->stf->txstreams); |
| |
| /* walk the phy rate table and update SHM basic rate lookup table */ |
| for (i = 0; i < rs.count; i++) { |
| rate = rs.rates[i] & RATE_MASK; |
| |
| /* for a given rate WLC_BASIC_RATE returns the rate at |
| * which a response ACK/CTS should be sent. |
| */ |
| basic_rate = WLC_BASIC_RATE(wlc, rate); |
| if (basic_rate == 0) { |
| /* This should only happen if we are using a |
| * restricted rateset. |
| */ |
| basic_rate = rs.rates[0] & RATE_MASK; |
| } |
| |
| wlc_write_rate_shm(wlc, rate, basic_rate); |
| } |
| } |
| |
| /* |
| * Return true if the specified rate is supported by the specified band. |
| * WLC_BAND_AUTO indicates the current band. |
| */ |
| bool wlc_valid_rate(wlc_info_t *wlc, ratespec_t rspec, int band, bool verbose) |
| { |
| wlc_rateset_t *hw_rateset; |
| uint i; |
| |
| if ((band == WLC_BAND_AUTO) || (band == wlc->band->bandtype)) { |
| hw_rateset = &wlc->band->hw_rateset; |
| } else if (NBANDS(wlc) > 1) { |
| hw_rateset = &wlc->bandstate[OTHERBANDUNIT(wlc)]->hw_rateset; |
| } else { |
| /* other band specified and we are a single band device */ |
| return FALSE; |
| } |
| |
| /* check if this is a mimo rate */ |
| if (IS_MCS(rspec)) { |
| if (!VALID_MCS((rspec & RSPEC_RATE_MASK))) |
| goto error; |
| |
| return isset(hw_rateset->mcs, (rspec & RSPEC_RATE_MASK)); |
| } |
| |
| for (i = 0; i < hw_rateset->count; i++) |
| if (hw_rateset->rates[i] == RSPEC2RATE(rspec)) |
| return TRUE; |
| error: |
| if (verbose) { |
| WL_ERROR(("wl%d: wlc_valid_rate: rate spec 0x%x not in hw_rateset\n", wlc->pub->unit, rspec)); |
| } |
| |
| return FALSE; |
| } |
| |
| static void wlc_update_mimo_band_bwcap(wlc_info_t *wlc, u8 bwcap) |
| { |
| uint i; |
| wlcband_t *band; |
| |
| for (i = 0; i < NBANDS(wlc); i++) { |
| if (IS_SINGLEBAND_5G(wlc->deviceid)) |
| i = BAND_5G_INDEX; |
| band = wlc->bandstate[i]; |
| if (band->bandtype == WLC_BAND_5G) { |
| if ((bwcap == WLC_N_BW_40ALL) |
| || (bwcap == WLC_N_BW_20IN2G_40IN5G)) |
| band->mimo_cap_40 = TRUE; |
| else |
| band->mimo_cap_40 = FALSE; |
| } else { |
| ASSERT(band->bandtype == WLC_BAND_2G); |
| if (bwcap == WLC_N_BW_40ALL) |
| band->mimo_cap_40 = TRUE; |
| else |
| band->mimo_cap_40 = FALSE; |
| } |
| } |
| |
| wlc->mimo_band_bwcap = bwcap; |
| } |
| |
| void wlc_mod_prb_rsp_rate_table(wlc_info_t *wlc, uint frame_len) |
| { |
| const wlc_rateset_t *rs_dflt; |
| wlc_rateset_t rs; |
| u8 rate; |
| uint16 entry_ptr; |
| u8 plcp[D11_PHY_HDR_LEN]; |
| uint16 dur, sifs; |
| uint i; |
| |
| sifs = SIFS(wlc->band); |
| |
| rs_dflt = wlc_rateset_get_hwrs(wlc); |
| ASSERT(rs_dflt != NULL); |
| |
| wlc_rateset_copy(rs_dflt, &rs); |
| wlc_rateset_mcs_upd(&rs, wlc->stf->txstreams); |
| |
| /* walk the phy rate table and update MAC core SHM basic rate table entries */ |
| for (i = 0; i < rs.count; i++) { |
| rate = rs.rates[i] & RATE_MASK; |
| |
| entry_ptr = wlc_rate_shm_offset(wlc, rate); |
| |
| /* Calculate the Probe Response PLCP for the given rate */ |
| wlc_compute_plcp(wlc, rate, frame_len, plcp); |
| |
| /* Calculate the duration of the Probe Response frame plus SIFS for the MAC */ |
| dur = |
| (uint16) wlc_calc_frame_time(wlc, rate, WLC_LONG_PREAMBLE, |
| frame_len); |
| dur += sifs; |
| |
| /* Update the SHM Rate Table entry Probe Response values */ |
| wlc_write_shm(wlc, entry_ptr + M_RT_PRS_PLCP_POS, |
| (uint16) (plcp[0] + (plcp[1] << 8))); |
| wlc_write_shm(wlc, entry_ptr + M_RT_PRS_PLCP_POS + 2, |
| (uint16) (plcp[2] + (plcp[3] << 8))); |
| wlc_write_shm(wlc, entry_ptr + M_RT_PRS_DUR_POS, dur); |
| } |
| } |
| |
| uint16 |
| wlc_compute_bcntsfoff(wlc_info_t *wlc, ratespec_t rspec, bool short_preamble, |
| bool phydelay) |
| { |
| uint bcntsfoff = 0; |
| |
| if (IS_MCS(rspec)) { |
| WL_ERROR(("wl%d: recd beacon with mcs rate; rspec 0x%x\n", |
| wlc->pub->unit, rspec)); |
| } else if (IS_OFDM(rspec)) { |
| /* tx delay from MAC through phy to air (2.1 usec) + |
| * phy header time (preamble + PLCP SIGNAL == 20 usec) + |
| * PLCP SERVICE + MAC header time (SERVICE + FC + DUR + A1 + A2 + A3 + SEQ == 26 |
| * bytes at beacon rate) |
| */ |
| bcntsfoff += phydelay ? D11A_PHY_TX_DELAY : 0; |
| bcntsfoff += APHY_PREAMBLE_TIME + APHY_SIGNAL_TIME; |
| bcntsfoff += |
| wlc_compute_airtime(wlc, rspec, |
| APHY_SERVICE_NBITS / 8 + |
| DOT11_MAC_HDR_LEN); |
| } else { |
| /* tx delay from MAC through phy to air (3.4 usec) + |
| * phy header time (long preamble + PLCP == 192 usec) + |
| * MAC header time (FC + DUR + A1 + A2 + A3 + SEQ == 24 bytes at beacon rate) |
| */ |
| bcntsfoff += phydelay ? D11B_PHY_TX_DELAY : 0; |
| bcntsfoff += |
| short_preamble ? D11B_PHY_SPREHDR_TIME : |
| D11B_PHY_LPREHDR_TIME; |
| bcntsfoff += wlc_compute_airtime(wlc, rspec, DOT11_MAC_HDR_LEN); |
| } |
| return (uint16) (bcntsfoff); |
| } |
| |
| /* Max buffering needed for beacon template/prb resp template is 142 bytes. |
| * |
| * PLCP header is 6 bytes. |
| * 802.11 A3 header is 24 bytes. |
| * Max beacon frame body template length is 112 bytes. |
| * Max probe resp frame body template length is 110 bytes. |
| * |
| * *len on input contains the max length of the packet available. |
| * |
| * The *len value is set to the number of bytes in buf used, and starts with the PLCP |
| * and included up to, but not including, the 4 byte FCS. |
| */ |
| static void |
| wlc_bcn_prb_template(wlc_info_t *wlc, uint type, ratespec_t bcn_rspec, |
| wlc_bsscfg_t *cfg, uint16 *buf, int *len) |
| { |
| cck_phy_hdr_t *plcp; |
| struct dot11_management_header *h; |
| int hdr_len, body_len; |
| |
| ASSERT(*len >= 142); |
| ASSERT(type == FC_BEACON || type == FC_PROBE_RESP); |
| |
| if (MBSS_BCN_ENAB(cfg) && type == FC_BEACON) |
| hdr_len = DOT11_MAC_HDR_LEN; |
| else |
| hdr_len = D11_PHY_HDR_LEN + DOT11_MAC_HDR_LEN; |
| body_len = *len - hdr_len; /* calc buffer size provided for frame body */ |
| |
| *len = hdr_len + body_len; /* return actual size */ |
| |
| /* format PHY and MAC headers */ |
| bzero((char *)buf, hdr_len); |
| |
| plcp = (cck_phy_hdr_t *) buf; |
| |
| /* PLCP for Probe Response frames are filled in from core's rate table */ |
| if (type == FC_BEACON && !MBSS_BCN_ENAB(cfg)) { |
| /* fill in PLCP */ |
| wlc_compute_plcp(wlc, bcn_rspec, |
| (DOT11_MAC_HDR_LEN + body_len + DOT11_FCS_LEN), |
| (u8 *) plcp); |
| |
| } |
| /* "Regular" and 16 MBSS but not for 4 MBSS */ |
| /* Update the phytxctl for the beacon based on the rspec */ |
| if (!SOFTBCN_ENAB(cfg)) |
| wlc_beacon_phytxctl_txant_upd(wlc, bcn_rspec); |
| |
| if (MBSS_BCN_ENAB(cfg) && type == FC_BEACON) |
| h = (struct dot11_management_header *)&plcp[0]; |
| else |
| h = (struct dot11_management_header *)&plcp[1]; |
| |
| /* fill in 802.11 header */ |
| h->fc = htol16((uint16) type); |
| |
| /* DUR is 0 for multicast bcn, or filled in by MAC for prb resp */ |
| /* A1 filled in by MAC for prb resp, broadcast for bcn */ |
| if (type == FC_BEACON) |
| bcopy((const char *)ðer_bcast, (char *)&h->da, |
| ETHER_ADDR_LEN); |
| bcopy((char *)&cfg->cur_etheraddr, (char *)&h->sa, ETHER_ADDR_LEN); |
| bcopy((char *)&cfg->BSSID, (char *)&h->bssid, ETHER_ADDR_LEN); |
| |
| /* SEQ filled in by MAC */ |
| |
| return; |
| } |
| |
| int wlc_get_header_len() |
| { |
| return TXOFF; |
| } |
| |
| /* Update a beacon for a particular BSS |
| * For MBSS, this updates the software template and sets "latest" to the index of the |
| * template updated. |
| * Otherwise, it updates the hardware template. |
| */ |
| void wlc_bss_update_beacon(wlc_info_t *wlc, wlc_bsscfg_t *cfg) |
| { |
| int len = BCN_TMPL_LEN; |
| |
| /* Clear the soft intmask */ |
| wlc->defmacintmask &= ~MI_BCNTPL; |
| |
| if (!cfg->up) { /* Only allow updates on an UP bss */ |
| return; |
| } |
| |
| if (MBSS_BCN_ENAB(cfg)) { /* Optimize: Some of if/else could be combined */ |
| } else if (HWBCN_ENAB(cfg)) { /* Hardware beaconing for this config */ |
| uint16 bcn[BCN_TMPL_LEN / 2]; |
| uint32 both_valid = MCMD_BCN0VLD | MCMD_BCN1VLD; |
| d11regs_t *regs = wlc->regs; |
| osl_t *osh = NULL; |
| |
| osh = wlc->osh; |
| |
| /* Check if both templates are in use, if so sched. an interrupt |
| * that will call back into this routine |
| */ |
| if ((R_REG(osh, ®s->maccommand) & both_valid) == both_valid) { |
| /* clear any previous status */ |
| W_REG(osh, ®s->macintstatus, MI_BCNTPL); |
| } |
| /* Check that after scheduling the interrupt both of the |
| * templates are still busy. if not clear the int. & remask |
| */ |
| if ((R_REG(osh, ®s->maccommand) & both_valid) == both_valid) { |
| wlc->defmacintmask |= MI_BCNTPL; |
| return; |
| } |
| |
| wlc->bcn_rspec = |
| wlc_lowest_basic_rspec(wlc, &cfg->current_bss->rateset); |
| ASSERT(wlc_valid_rate |
| (wlc, wlc->bcn_rspec, |
| CHSPEC_IS2G(cfg->current_bss-> |
| chanspec) ? WLC_BAND_2G : WLC_BAND_5G, |
| TRUE)); |
| |
| /* update the template and ucode shm */ |
| wlc_bcn_prb_template(wlc, FC_BEACON, wlc->bcn_rspec, cfg, bcn, |
| &len); |
| wlc_write_hw_bcntemplates(wlc, bcn, len, FALSE); |
| } |
| } |
| |
| /* |
| * Update all beacons for the system. |
| */ |
| void wlc_update_beacon(wlc_info_t *wlc) |
| { |
| int idx; |
| wlc_bsscfg_t *bsscfg; |
| |
| /* update AP or IBSS beacons */ |
| FOREACH_BSS(wlc, idx, bsscfg) { |
| if (bsscfg->up && (BSSCFG_AP(bsscfg) || !bsscfg->BSS)) |
| wlc_bss_update_beacon(wlc, bsscfg); |
| } |
| } |
| |
| /* Write ssid into shared memory */ |
| void wlc_shm_ssid_upd(wlc_info_t *wlc, wlc_bsscfg_t *cfg) |
| { |
| u8 *ssidptr = cfg->SSID; |
| uint16 base = M_SSID; |
| u8 ssidbuf[DOT11_MAX_SSID_LEN]; |
| |
| /* padding the ssid with zero and copy it into shm */ |
| bzero(ssidbuf, DOT11_MAX_SSID_LEN); |
| bcopy(ssidptr, ssidbuf, cfg->SSID_len); |
| |
| wlc_copyto_shm(wlc, base, ssidbuf, DOT11_MAX_SSID_LEN); |
| |
| if (!MBSS_BCN_ENAB(cfg)) |
| wlc_write_shm(wlc, M_SSIDLEN, (uint16) cfg->SSID_len); |
| } |
| |
| void wlc_update_probe_resp(wlc_info_t *wlc, bool suspend) |
| { |
| int idx; |
| wlc_bsscfg_t *bsscfg; |
| |
| /* update AP or IBSS probe responses */ |
| FOREACH_BSS(wlc, idx, bsscfg) { |
| if (bsscfg->up && (BSSCFG_AP(bsscfg) || !bsscfg->BSS)) |
| wlc_bss_update_probe_resp(wlc, bsscfg, suspend); |
| } |
| } |
| |
| void |
| wlc_bss_update_probe_resp(wlc_info_t *wlc, wlc_bsscfg_t *cfg, bool suspend) |
| { |
| uint16 prb_resp[BCN_TMPL_LEN / 2]; |
| int len = BCN_TMPL_LEN; |
| |
| /* write the probe response to hardware, or save in the config structure */ |
| if (!MBSS_PRB_ENAB(cfg)) { |
| |
| /* create the probe response template */ |
| wlc_bcn_prb_template(wlc, FC_PROBE_RESP, 0, cfg, prb_resp, |
| &len); |
| |
| if (suspend) |
| wlc_suspend_mac_and_wait(wlc); |
| |
| /* write the probe response into the template region */ |
| wlc_bmac_write_template_ram(wlc->hw, T_PRS_TPL_BASE, |
| (len + 3) & ~3, prb_resp); |
| |
| /* write the length of the probe response frame (+PLCP/-FCS) */ |
| wlc_write_shm(wlc, M_PRB_RESP_FRM_LEN, (uint16) len); |
| |
| /* write the SSID and SSID length */ |
| wlc_shm_ssid_upd(wlc, cfg); |
| |
| /* |
| * Write PLCP headers and durations for probe response frames at all rates. |
| * Use the actual frame length covered by the PLCP header for the call to |
| * wlc_mod_prb_rsp_rate_table() by subtracting the PLCP len and adding the FCS. |
| */ |
| len += (-D11_PHY_HDR_LEN + DOT11_FCS_LEN); |
| wlc_mod_prb_rsp_rate_table(wlc, (uint16) len); |
| |
| if (suspend) |
| wlc_enable_mac(wlc); |
| } else { /* Generating probe resp in sw; update local template */ |
| ASSERT(0 && "No software probe response support without MBSS"); |
| } |
| } |
| |
| /* prepares pdu for transmission. returns BCM error codes */ |
| int wlc_prep_pdu(wlc_info_t *wlc, void *pdu, uint *fifop) |
| { |
| osl_t *osh; |
| uint fifo; |
| d11txh_t *txh; |
| struct dot11_header *h; |
| struct scb *scb; |
| uint16 fc; |
| |
| osh = wlc->osh; |
| |
| ASSERT(pdu); |
| txh = (d11txh_t *) PKTDATA(pdu); |
| ASSERT(txh); |
| h = (struct dot11_header *)((u8 *) (txh + 1) + D11_PHY_HDR_LEN); |
| ASSERT(h); |
| fc = ltoh16(h->fc); |
| |
| /* get the pkt queue info. This was put at wlc_sendctl or wlc_send for PDU */ |
| fifo = ltoh16(txh->TxFrameID) & TXFID_QUEUE_MASK; |
| |
| scb = NULL; |
| |
| *fifop = fifo; |
| |
| /* return if insufficient dma resources */ |
| if (TXAVAIL(wlc, fifo) < MAX_DMA_SEGS) { |
| /* Mark precedences related to this FIFO, unsendable */ |
| WLC_TX_FIFO_CLEAR(wlc, fifo); |
| return BCME_BUSY; |
| } |
| |
| if (FC_TYPE(ltoh16(txh->MacFrameControl)) != FC_TYPE_DATA) |
| WLCNTINCR(wlc->pub->_cnt->txctl); |
| |
| return 0; |
| } |
| |
| /* init tx reported rate mechanism */ |
| void wlc_reprate_init(wlc_info_t *wlc) |
| { |
| int i; |
| wlc_bsscfg_t *bsscfg; |
| |
| FOREACH_BSS(wlc, i, bsscfg) { |
| wlc_bsscfg_reprate_init(bsscfg); |
| } |
| } |
| |
| /* per bsscfg init tx reported rate mechanism */ |
| void wlc_bsscfg_reprate_init(wlc_bsscfg_t *bsscfg) |
| { |
| bsscfg->txrspecidx = 0; |
| bzero((char *)bsscfg->txrspec, sizeof(bsscfg->txrspec)); |
| } |
| |
| /* Retrieve a consolidated set of revision information, |
| * typically for the WLC_GET_REVINFO ioctl |
| */ |
| int wlc_get_revision_info(wlc_info_t *wlc, void *buf, uint len) |
| { |
| wlc_rev_info_t *rinfo = (wlc_rev_info_t *) buf; |
| |
| if (len < WL_REV_INFO_LEGACY_LENGTH) |
| return BCME_BUFTOOSHORT; |
| |
| rinfo->vendorid = wlc->vendorid; |
| rinfo->deviceid = wlc->deviceid; |
| rinfo->radiorev = (wlc->band->radiorev << IDCODE_REV_SHIFT) | |
| (wlc->band->radioid << IDCODE_ID_SHIFT); |
| rinfo->chiprev = wlc->pub->sih->chiprev; |
| rinfo->corerev = wlc->pub->corerev; |
| rinfo->boardid = wlc->pub->sih->boardtype; |
| rinfo->boardvendor = wlc->pub->sih->boardvendor; |
| rinfo->boardrev = wlc->pub->boardrev; |
| rinfo->ucoderev = wlc->ucode_rev; |
| rinfo->driverrev = EPI_VERSION_NUM; |
| rinfo->bus = wlc->pub->sih->bustype; |
| rinfo->chipnum = wlc->pub->sih->chip; |
| |
| if (len >= (OFFSETOF(wlc_rev_info_t, chippkg))) { |
| rinfo->phytype = wlc->band->phytype; |
| rinfo->phyrev = wlc->band->phyrev; |
| rinfo->anarev = 0; /* obsolete stuff, suppress */ |
| } |
| |
| if (len >= sizeof(*rinfo)) { |
| rinfo->chippkg = wlc->pub->sih->chippkg; |
| } |
| |
| return BCME_OK; |
| } |
| |
| void wlc_default_rateset(wlc_info_t *wlc, wlc_rateset_t *rs) |
| { |
| wlc_rateset_default(rs, NULL, wlc->band->phytype, wlc->band->bandtype, |
| FALSE, RATE_MASK_FULL, (bool) N_ENAB(wlc->pub), |
| CHSPEC_WLC_BW(wlc->default_bss->chanspec), |
| wlc->stf->txstreams); |
| } |
| |
| static void BCMATTACHFN(wlc_bss_default_init) (wlc_info_t *wlc) |
| { |
| chanspec_t chanspec; |
| wlcband_t *band; |
| wlc_bss_info_t *bi = wlc->default_bss; |
| |
| /* init default and target BSS with some sane initial values */ |
| bzero((char *)(bi), sizeof(wlc_bss_info_t)); |
| bi->beacon_period = ISSIM_ENAB(wlc->pub->sih) ? BEACON_INTERVAL_DEF_QT : |
| BEACON_INTERVAL_DEFAULT; |
| bi->dtim_period = ISSIM_ENAB(wlc->pub->sih) ? DTIM_INTERVAL_DEF_QT : |
| DTIM_INTERVAL_DEFAULT; |
| |
| /* fill the default channel as the first valid channel |
| * starting from the 2G channels |
| */ |
| chanspec = CH20MHZ_CHSPEC(1); |
| ASSERT(chanspec != INVCHANSPEC); |
| |
| wlc->home_chanspec = bi->chanspec = chanspec; |
| |
| /* find the band of our default channel */ |
| band = wlc->band; |
| if (NBANDS(wlc) > 1 && band->bandunit != CHSPEC_WLCBANDUNIT(chanspec)) |
| band = wlc->bandstate[OTHERBANDUNIT(wlc)]; |
| |
| /* init bss rates to the band specific default rate set */ |
| wlc_rateset_default(&bi->rateset, NULL, band->phytype, band->bandtype, |
| FALSE, RATE_MASK_FULL, (bool) N_ENAB(wlc->pub), |
| CHSPEC_WLC_BW(chanspec), wlc->stf->txstreams); |
| |
| if (N_ENAB(wlc->pub)) |
| bi->flags |= WLC_BSS_HT; |
| } |
| |
| /* Deferred event processing */ |
| static void wlc_process_eventq(void *arg) |
| { |
| wlc_info_t *wlc = (wlc_info_t *) arg; |
| wlc_event_t *etmp; |
| |
| while ((etmp = wlc_eventq_deq(wlc->eventq))) { |
| /* Perform OS specific event processing */ |
| wl_event(wlc->wl, etmp->event.ifname, etmp); |
| if (etmp->data) { |
| osl_mfree(wlc->osh, etmp->data, etmp->event.datalen); |
| etmp->data = NULL; |
| } |
| wlc_event_free(wlc->eventq, etmp); |
| } |
| } |
| |
| void |
| wlc_uint64_sub(uint32 *a_high, uint32 *a_low, uint32 b_high, uint32 b_low) |
| { |
| if (b_low > *a_low) { |
| /* low half needs a carry */ |
| b_high += 1; |
| } |
| *a_low -= b_low; |
| *a_high -= b_high; |
| } |
| |
| static ratespec_t |
| mac80211_wlc_set_nrate(wlc_info_t *wlc, wlcband_t *cur_band, uint32 int_val) |
| { |
| u8 stf = (int_val & NRATE_STF_MASK) >> NRATE_STF_SHIFT; |
| u8 rate = int_val & NRATE_RATE_MASK; |
| ratespec_t rspec; |
| bool ismcs = ((int_val & NRATE_MCS_INUSE) == NRATE_MCS_INUSE); |
| bool issgi = ((int_val & NRATE_SGI_MASK) >> NRATE_SGI_SHIFT); |
| bool override_mcs_only = ((int_val & NRATE_OVERRIDE_MCS_ONLY) |
| == NRATE_OVERRIDE_MCS_ONLY); |
| int bcmerror = 0; |
| |
| if (!ismcs) { |
| return (ratespec_t) rate; |
| } |
| |
| /* validate the combination of rate/mcs/stf is allowed */ |
| if (N_ENAB(wlc->pub) && ismcs) { |
| /* mcs only allowed when nmode */ |
| if (stf > PHY_TXC1_MODE_SDM) { |
| WL_ERROR(("wl%d: %s: Invalid stf\n", WLCWLUNIT(wlc), |
| __func__)); |
| bcmerror = BCME_RANGE; |
| goto done; |
| } |
| |
| /* mcs 32 is a special case, DUP mode 40 only */ |
| if (rate == 32) { |
| if (!CHSPEC_IS40(wlc->home_chanspec) || |
| ((stf != PHY_TXC1_MODE_SISO) |
| && (stf != PHY_TXC1_MODE_CDD))) { |
| WL_ERROR(("wl%d: %s: Invalid mcs 32\n", |
| WLCWLUNIT(wlc), __func__)); |
| bcmerror = BCME_RANGE; |
| goto done; |
| } |
| /* mcs > 7 must use stf SDM */ |
| } else if (rate > HIGHEST_SINGLE_STREAM_MCS) { |
| /* mcs > 7 must use stf SDM */ |
| if (stf != PHY_TXC1_MODE_SDM) { |
| WL_TRACE(("wl%d: %s: enabling SDM mode for mcs %d\n", WLCWLUNIT(wlc), __func__, rate)); |
| stf = PHY_TXC1_MODE_SDM; |
| } |
| } else { |
| /* MCS 0-7 may use SISO, CDD, and for phy_rev >= 3 STBC */ |
| if ((stf > PHY_TXC1_MODE_STBC) || |
| (!WLC_STBC_CAP_PHY(wlc) |
| && (stf == PHY_TXC1_MODE_STBC))) { |
| WL_ERROR(("wl%d: %s: Invalid STBC\n", |
| WLCWLUNIT(wlc), __func__)); |
| bcmerror = BCME_RANGE; |
| goto done; |
| } |
| } |
| } else if (IS_OFDM(rate)) { |
| if ((stf != PHY_TXC1_MODE_CDD) && (stf != PHY_TXC1_MODE_SISO)) { |
| WL_ERROR(("wl%d: %s: Invalid OFDM\n", WLCWLUNIT(wlc), |
| __func__)); |
| bcmerror = BCME_RANGE; |
| goto done; |
| } |
| } else if (IS_CCK(rate)) { |
| if ((cur_band->bandtype != WLC_BAND_2G) |
| || (stf != PHY_TXC1_MODE_SISO)) { |
| WL_ERROR(("wl%d: %s: Invalid CCK\n", WLCWLUNIT(wlc), |
| __func__)); |
| bcmerror = BCME_RANGE; |
| goto done; |
| } |
| } else { |
| WL_ERROR(("wl%d: %s: Unknown rate type\n", WLCWLUNIT(wlc), |
| __func__)); |
| bcmerror = BCME_RANGE; |
| goto done; |
| } |
| /* make sure multiple antennae are available for non-siso rates */ |
| if ((stf != PHY_TXC1_MODE_SISO) && (wlc->stf->txstreams == 1)) { |
| WL_ERROR(("wl%d: %s: SISO antenna but !SISO request\n", |
| WLCWLUNIT(wlc), __func__)); |
| bcmerror = BCME_RANGE; |
| goto done; |
| } |
| |
| rspec = rate; |
| if (ismcs) { |
| rspec |= RSPEC_MIMORATE; |
| /* For STBC populate the STC field of the ratespec */ |
| if (stf == PHY_TXC1_MODE_STBC) { |
| u8 stc; |
| stc = 1; /* Nss for single stream is always 1 */ |
| rspec |= (stc << RSPEC_STC_SHIFT); |
| } |
| } |
| |
| rspec |= (stf << RSPEC_STF_SHIFT); |
| |
| if (override_mcs_only) |
| rspec |= RSPEC_OVERRIDE_MCS_ONLY; |
| |
| if (issgi) |
| rspec |= RSPEC_SHORT_GI; |
| |
| if ((rate != 0) |
| && !wlc_valid_rate(wlc, rspec, cur_band->bandtype, TRUE)) { |
| return rate; |
| } |
| |
| return rspec; |
| done: |
| WL_ERROR(("Hoark\n")); |
| return rate; |
| } |
| |
| /* formula: IDLE_BUSY_RATIO_X_16 = (100-duty_cycle)/duty_cycle*16 */ |
| static int |
| wlc_duty_cycle_set(wlc_info_t *wlc, int duty_cycle, bool isOFDM, |
| bool writeToShm) |
| { |
| int idle_busy_ratio_x_16 = 0; |
| uint offset = |
| isOFDM ? M_TX_IDLE_BUSY_RATIO_X_16_OFDM : |
| M_TX_IDLE_BUSY_RATIO_X_16_CCK; |
| if (duty_cycle > 100 || duty_cycle < 0) { |
| WL_ERROR(("wl%d: duty cycle value off limit\n", |
| wlc->pub->unit)); |
| return BCME_RANGE; |
| } |
| if (duty_cycle) |
| idle_busy_ratio_x_16 = (100 - duty_cycle) * 16 / duty_cycle; |
| /* Only write to shared memory when wl is up */ |
| if (writeToShm) |
| wlc_write_shm(wlc, offset, (uint16) idle_busy_ratio_x_16); |
| |
| if (isOFDM) |
| wlc->tx_duty_cycle_ofdm = (uint16) duty_cycle; |
| else |
| wlc->tx_duty_cycle_cck = (uint16) duty_cycle; |
| |
| return BCME_OK; |
| } |
| |
| void |
| wlc_pktengtx(wlc_info_t *wlc, wl_pkteng_t *pkteng, u8 rate, |
| struct ether_addr *sa, uint32 wait_delay) |
| { |
| bool suspend; |
| uint16 val = M_PKTENG_MODE_TX; |
| volatile uint16 frame_cnt_check; |
| u8 counter = 0; |
| |
| wlc_bmac_set_deaf(wlc->hw, TRUE); |
| |
| suspend = |
| (0 == (R_REG(wlc->hw->osh, &wlc->regs->maccontrol) & MCTL_EN_MAC)); |
| if (suspend) |
| wlc_enable_mac(wlc); |
| |
| /* set nframes */ |
| if (pkteng->nframes) { |
| /* retry counter is used to replay the packet */ |
| wlc_bmac_write_shm(wlc->hw, M_PKTENG_FRMCNT_LO, |
| (pkteng->nframes & 0xffff)); |
| wlc_bmac_write_shm(wlc->hw, M_PKTENG_FRMCNT_HI, |
| ((pkteng->nframes >> 16) & 0xffff)); |
| val |= M_PKTENG_FRMCNT_VLD; |
| } |
| |
| if (pkteng->length) { |
| /* DATA frame */ |
| wlc_bmac_write_shm(wlc->hw, M_PKTENG_CTRL, val); |
| /* we write to M_MFGTEST_IFS the IFS required in 1/8us factor */ |
| /* 10 : for factoring difference b/w Tx.crs and energy in air */ |
| /* 44 : amount of time spent after TX_RRSP to frame start */ |
| /* IFS */ |
| wlc_bmac_write_shm(wlc->hw, M_PKTENG_IFS, |
| (pkteng->delay - 10) * 8 - 44); |
| } else { |
| /* CTS frame */ |
| val |= M_PKTENG_MODE_TX_CTS; |
| wlc_bmac_write_shm(wlc->hw, M_PKTENG_IFS, |
| (uint16) pkteng->delay); |
| wlc_bmac_write_shm(wlc->hw, M_PKTENG_CTRL, val); |
| } |
| |
| /* Wait for packets to finish */ |
| frame_cnt_check = wlc_bmac_read_shm(wlc->hw, M_PKTENG_FRMCNT_LO); |
| while ((counter < 100) && (frame_cnt_check != 0)) { |
| OSL_DELAY(100); |
| frame_cnt_check = |
| wlc_bmac_read_shm(wlc->hw, M_PKTENG_FRMCNT_LO); |
| counter++; |
| } |
| |
| wlc_bmac_write_shm(wlc->hw, M_PKTENG_CTRL, 0); |
| |
| if (suspend) |
| wlc_suspend_mac_and_wait(wlc); |
| |
| wlc_bmac_set_deaf(wlc->hw, FALSE); |
| } |
| |
| /* Read a single uint16 from shared memory. |
| * SHM 'offset' needs to be an even address |
| */ |
| uint16 wlc_read_shm(wlc_info_t *wlc, uint offset) |
| { |
| return wlc_bmac_read_shm(wlc->hw, offset); |
| } |
| |
| /* Write a single uint16 to shared memory. |
| * SHM 'offset' needs to be an even address |
| */ |
| void wlc_write_shm(wlc_info_t *wlc, uint offset, uint16 v) |
| { |
| wlc_bmac_write_shm(wlc->hw, offset, v); |
| } |
| |
| /* Set a range of shared memory to a value. |
| * SHM 'offset' needs to be an even address and |
| * Range length 'len' must be an even number of bytes |
| */ |
| void wlc_set_shm(wlc_info_t *wlc, uint offset, uint16 v, int len) |
| { |
| /* offset and len need to be even */ |
| ASSERT((offset & 1) == 0); |
| ASSERT((len & 1) == 0); |
| |
| if (len <= 0) |
| return; |
| |
| wlc_bmac_set_shm(wlc->hw, offset, v, len); |
| } |
| |
| /* Copy a buffer to shared memory. |
| * SHM 'offset' needs to be an even address and |
| * Buffer length 'len' must be an even number of bytes |
| */ |
| void wlc_copyto_shm(wlc_info_t *wlc, uint offset, const void *buf, int len) |
| { |
| /* offset and len need to be even */ |
| ASSERT((offset & 1) == 0); |
| ASSERT((len & 1) == 0); |
| |
| if (len <= 0) |
| return; |
| wlc_bmac_copyto_objmem(wlc->hw, offset, buf, len, OBJADDR_SHM_SEL); |
| |
| } |
| |
| /* Copy from shared memory to a buffer. |
| * SHM 'offset' needs to be an even address and |
| * Buffer length 'len' must be an even number of bytes |
| */ |
| void wlc_copyfrom_shm(wlc_info_t *wlc, uint offset, void *buf, int len) |
| { |
| /* offset and len need to be even */ |
| ASSERT((offset & 1) == 0); |
| ASSERT((len & 1) == 0); |
| |
| if (len <= 0) |
| return; |
| |
| wlc_bmac_copyfrom_objmem(wlc->hw, offset, buf, len, OBJADDR_SHM_SEL); |
| } |
| |
| /* wrapper BMAC functions to for HIGH driver access */ |
| void wlc_mctrl(wlc_info_t *wlc, uint32 mask, uint32 val) |
| { |
| wlc_bmac_mctrl(wlc->hw, mask, val); |
| } |
| |
| void wlc_corereset(wlc_info_t *wlc, uint32 flags) |
| { |
| wlc_bmac_corereset(wlc->hw, flags); |
| } |
| |
| void wlc_mhf(wlc_info_t *wlc, u8 idx, uint16 mask, uint16 val, int bands) |
| { |
| wlc_bmac_mhf(wlc->hw, idx, mask, val, bands); |
| } |
| |
| uint16 wlc_mhf_get(wlc_info_t *wlc, u8 idx, int bands) |
| { |
| return wlc_bmac_mhf_get(wlc->hw, idx, bands); |
| } |
| |
| int wlc_xmtfifo_sz_get(wlc_info_t *wlc, uint fifo, uint *blocks) |
| { |
| return wlc_bmac_xmtfifo_sz_get(wlc->hw, fifo, blocks); |
| } |
| |
| void wlc_write_template_ram(wlc_info_t *wlc, int offset, int len, void *buf) |
| { |
| wlc_bmac_write_template_ram(wlc->hw, offset, len, buf); |
| } |
| |
| void wlc_write_hw_bcntemplates(wlc_info_t *wlc, void *bcn, int len, bool both) |
| { |
| wlc_bmac_write_hw_bcntemplates(wlc->hw, bcn, len, both); |
| } |
| |
| void |
| wlc_set_addrmatch(wlc_info_t *wlc, int match_reg_offset, |
| const struct ether_addr *addr) |
| { |
| wlc_bmac_set_addrmatch(wlc->hw, match_reg_offset, addr); |
| } |
| |
| void wlc_set_rcmta(wlc_info_t *wlc, int idx, const struct ether_addr *addr) |
| { |
| wlc_bmac_set_rcmta(wlc->hw, idx, addr); |
| } |
| |
| void wlc_read_tsf(wlc_info_t *wlc, uint32 *tsf_l_ptr, uint32 *tsf_h_ptr) |
| { |
| wlc_bmac_read_tsf(wlc->hw, tsf_l_ptr, tsf_h_ptr); |
| } |
| |
| void wlc_set_cwmin(wlc_info_t *wlc, uint16 newmin) |
| { |
| wlc->band->CWmin = newmin; |
| wlc_bmac_set_cwmin(wlc->hw, newmin); |
| } |
| |
| void wlc_set_cwmax(wlc_info_t *wlc, uint16 newmax) |
| { |
| wlc->band->CWmax = newmax; |
| wlc_bmac_set_cwmax(wlc->hw, newmax); |
| } |
| |
| void wlc_fifoerrors(wlc_info_t *wlc) |
| { |
| |
| wlc_bmac_fifoerrors(wlc->hw); |
| } |
| |
| /* Search mem rw utilities */ |
| |
| void wlc_pllreq(wlc_info_t *wlc, bool set, mbool req_bit) |
| { |
| wlc_bmac_pllreq(wlc->hw, set, req_bit); |
| } |
| |
| void wlc_reset_bmac_done(wlc_info_t *wlc) |
| { |
| #ifdef WLC_HIGH_ONLY |
| wlc->reset_bmac_pending = FALSE; |
| #endif |
| } |
| |
| void wlc_ht_mimops_cap_update(wlc_info_t *wlc, u8 mimops_mode) |
| { |
| wlc->ht_cap.cap &= ~HT_CAP_MIMO_PS_MASK; |
| wlc->ht_cap.cap |= (mimops_mode << HT_CAP_MIMO_PS_SHIFT); |
| |
| if (AP_ENAB(wlc->pub) && wlc->clk) { |
| wlc_update_beacon(wlc); |
| wlc_update_probe_resp(wlc, TRUE); |
| } |
| } |
| |
| /* check for the particular priority flow control bit being set */ |
| bool |
| wlc_txflowcontrol_prio_isset(wlc_info_t *wlc, wlc_txq_info_t *q, int prio) |
| { |
| uint prio_mask; |
| |
| if (prio == ALLPRIO) { |
| prio_mask = TXQ_STOP_FOR_PRIOFC_MASK; |
| } else { |
| ASSERT(prio >= 0 && prio <= MAXPRIO); |
| prio_mask = NBITVAL(prio); |
| } |
| |
| return (q->stopped & prio_mask) == prio_mask; |
| } |
| |
| /* propogate the flow control to all interfaces using the given tx queue */ |
| void wlc_txflowcontrol(wlc_info_t *wlc, wlc_txq_info_t *qi, bool on, int prio) |
| { |
| uint prio_bits; |
| uint cur_bits; |
| |
| WL_ERROR(("%s: flow contro kicks in\n", __func__)); |
| |
| if (prio == ALLPRIO) { |
| prio_bits = TXQ_STOP_FOR_PRIOFC_MASK; |
| } else { |
| ASSERT(prio >= 0 && prio <= MAXPRIO); |
| prio_bits = NBITVAL(prio); |
| } |
| |
| cur_bits = qi->stopped & prio_bits; |
| |
| /* Check for the case of no change and return early |
| * Otherwise update the bit and continue |
| */ |
| if (on) { |
| if (cur_bits == prio_bits) { |
| return; |
| } |
| mboolset(qi->stopped, prio_bits); |
| } else { |
| if (cur_bits == 0) { |
| return; |
| } |
| mboolclr(qi->stopped, prio_bits); |
| } |
| |
| /* If there is a flow control override we will not change the external |
| * flow control state. |
| */ |
| if (qi->stopped & ~TXQ_STOP_FOR_PRIOFC_MASK) { |
| return; |
| } |
| |
| wlc_txflowcontrol_signal(wlc, qi, on, prio); |
| } |
| |
| void |
| wlc_txflowcontrol_override(wlc_info_t *wlc, wlc_txq_info_t *qi, bool on, |
| uint override) |
| { |
| uint prev_override; |
| |
| ASSERT(override != 0); |
| ASSERT((override & TXQ_STOP_FOR_PRIOFC_MASK) == 0); |
| |
| prev_override = (qi->stopped & ~TXQ_STOP_FOR_PRIOFC_MASK); |
| |
| /* Update the flow control bits and do an early return if there is |
| * no change in the external flow control state. |
| */ |
| if (on) { |
| mboolset(qi->stopped, override); |
| /* if there was a previous override bit on, then setting this |
| * makes no difference. |
| */ |
| if (prev_override) { |
| return; |
| } |
| |
| wlc_txflowcontrol_signal(wlc, qi, ON, ALLPRIO); |
| } else { |
| mboolclr(qi->stopped, override); |
| /* clearing an override bit will only make a difference for |
| * flow control if it was the only bit set. For any other |
| * override setting, just return |
| */ |
| if (prev_override != override) { |
| return; |
| } |
| |
| if (qi->stopped == 0) { |
| wlc_txflowcontrol_signal(wlc, qi, OFF, ALLPRIO); |
| } else { |
| int prio; |
| |
| for (prio = MAXPRIO; prio >= 0; prio--) { |
| if (!mboolisset(qi->stopped, NBITVAL(prio))) |
| wlc_txflowcontrol_signal(wlc, qi, OFF, |
| prio); |
| } |
| } |
| } |
| } |
| |
| static void wlc_txflowcontrol_reset(wlc_info_t *wlc) |
| { |
| wlc_txq_info_t *qi; |
| |
| for (qi = wlc->tx_queues; qi != NULL; qi = qi->next) { |
| if (qi->stopped) { |
| wlc_txflowcontrol_signal(wlc, qi, OFF, ALLPRIO); |
| qi->stopped = 0; |
| } |
| } |
| } |
| |
| static void |
| wlc_txflowcontrol_signal(wlc_info_t *wlc, wlc_txq_info_t *qi, bool on, |
| int prio) |
| { |
| wlc_if_t *wlcif; |
| |
| for (wlcif = wlc->wlcif_list; wlcif != NULL; wlcif = wlcif->next) { |
| if (wlcif->qi == qi && wlcif->flags & WLC_IF_LINKED) |
| wl_txflowcontrol(wlc->wl, wlcif->wlif, on, prio); |
| } |
| } |
| |
| static wlc_txq_info_t *wlc_txq_alloc(wlc_info_t *wlc, osl_t *osh) |
| { |
| wlc_txq_info_t *qi, *p; |
| |
| qi = (wlc_txq_info_t *) wlc_calloc(osh, wlc->pub->unit, |
| sizeof(wlc_txq_info_t)); |
| if (qi == NULL) { |
| return NULL; |
| } |
| |
| /* Have enough room for control packets along with HI watermark */ |
| /* Also, add room to txq for total psq packets if all the SCBs leave PS mode */ |
| /* The watermark for flowcontrol to OS packets will remain the same */ |
| pktq_init(&qi->q, WLC_PREC_COUNT, |
| (2 * wlc->pub->tunables->datahiwat) + PKTQ_LEN_DEFAULT + |
| wlc->pub->psq_pkts_total); |
| |
| /* add this queue to the the global list */ |
| p = wlc->tx_queues; |
| if (p == NULL) { |
| wlc->tx_queues = qi; |
| } else { |
| while (p->next != NULL) |
| p = p->next; |
| p->next = qi; |
| } |
| |
| return qi; |
| } |
| |
| static void wlc_txq_free(wlc_info_t *wlc, osl_t *osh, wlc_txq_info_t *qi) |
| { |
| wlc_txq_info_t *p; |
| |
| if (qi == NULL) |
| return; |
| |
| /* remove the queue from the linked list */ |
| p = wlc->tx_queues; |
| if (p == qi) |
| wlc->tx_queues = p->next; |
| else { |
| while (p != NULL && p->next != qi) |
| p = p->next; |
| ASSERT(p->next == qi); |
| if (p != NULL) |
| p->next = p->next->next; |
| } |
| |
| osl_mfree(osh, qi, sizeof(wlc_txq_info_t)); |
| } |