hwmon: Add support for Texas Instruments/Burr-Brown ADS7828
Signed-off-by: Steve Hardy <steve@linuxrealtime.co.uk>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
diff --git a/Documentation/hwmon/ads7828 b/Documentation/hwmon/ads7828
new file mode 100644
index 0000000..75bc4be
--- /dev/null
+++ b/Documentation/hwmon/ads7828
@@ -0,0 +1,36 @@
+Kernel driver ads7828
+=====================
+
+Supported chips:
+ * Texas Instruments/Burr-Brown ADS7828
+ Prefix: 'ads7828'
+ Addresses scanned: I2C 0x48, 0x49, 0x4a, 0x4b
+ Datasheet: Publicly available at the Texas Instruments website :
+ http://focus.ti.com/lit/ds/symlink/ads7828.pdf
+
+Authors:
+ Steve Hardy <steve@linuxrealtime.co.uk>
+
+Module Parameters
+-----------------
+
+* se_input: bool (default Y)
+ Single ended operation - set to N for differential mode
+* int_vref: bool (default Y)
+ Operate with the internal 2.5V reference - set to N for external reference
+* vref_mv: int (default 2500)
+ If using an external reference, set this to the reference voltage in mV
+
+Description
+-----------
+
+This driver implements support for the Texas Instruments ADS7828.
+
+This device is a 12-bit 8-channel A-D converter.
+
+It can operate in single ended mode (8 +ve inputs) or in differential mode,
+where 4 differential pairs can be measured.
+
+The chip also has the facility to use an external voltage reference. This
+may be required if your hardware supplies the ADS7828 from a 5V supply, see
+the datasheet for more details.