| /* Copyright (c) 2017, The Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| &soc { |
| mdss_dsi0_pll: qcom,mdss_dsi_pll@ae94a00 { |
| compatible = "qcom,mdss_dsi_pll_10nm"; |
| label = "MDSS DSI 0 PLL"; |
| cell-index = <0>; |
| #clock-cells = <1>; |
| reg = <0xae94a00 0x1e0>, |
| <0xae94400 0x800>, |
| <0xaf03000 0x8>; |
| reg-names = "pll_base", "phy_base", "gdsc_base"; |
| clocks = <&clock_dispcc DISP_CC_MDSS_AHB_CLK>; |
| clock-names = "iface_clk"; |
| clock-rate = <0>; |
| gdsc-supply = <&mdss_core_gdsc>; |
| qcom,platform-supply-entries { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| qcom,platform-supply-entry@0 { |
| reg = <0>; |
| qcom,supply-name = "gdsc"; |
| qcom,supply-min-voltage = <0>; |
| qcom,supply-max-voltage = <0>; |
| qcom,supply-enable-load = <0>; |
| qcom,supply-disable-load = <0>; |
| }; |
| }; |
| }; |
| |
| mdss_dsi1_pll: qcom,mdss_dsi_pll@ae96a00 { |
| compatible = "qcom,mdss_dsi_pll_10nm"; |
| label = "MDSS DSI 1 PLL"; |
| cell-index = <1>; |
| #clock-cells = <1>; |
| reg = <0xae96a00 0x1e0>, |
| <0xae96400 0x800>, |
| <0xaf03000 0x8>; |
| reg-names = "pll_base", "phy_base", "gdsc_base"; |
| clocks = <&clock_dispcc DISP_CC_MDSS_AHB_CLK>; |
| clock-names = "iface_clk"; |
| clock-rate = <0>; |
| gdsc-supply = <&mdss_core_gdsc>; |
| qcom,platform-supply-entries { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| qcom,platform-supply-entry@0 { |
| reg = <0>; |
| qcom,supply-name = "gdsc"; |
| qcom,supply-min-voltage = <0>; |
| qcom,supply-max-voltage = <0>; |
| qcom,supply-enable-load = <0>; |
| qcom,supply-disable-load = <0>; |
| }; |
| }; |
| }; |
| |
| mdss_dp_pll: qcom,mdss_dp_pll@88ea000 { |
| compatible = "qcom,mdss_dp_pll_10nm"; |
| label = "MDSS DP PLL"; |
| cell-index = <0>; |
| #clock-cells = <1>; |
| |
| reg = <0x088ea000 0x200>, |
| <0x088eaa00 0x200>, |
| <0x088ea200 0x200>, |
| <0x088ea600 0x200>, |
| <0xaf03000 0x8>; |
| reg-names = "pll_base", "phy_base", "ln_tx0_base", |
| "ln_tx1_base", "gdsc_base"; |
| |
| gdsc-supply = <&mdss_core_gdsc>; |
| |
| clocks = <&clock_dispcc DISP_CC_MDSS_AHB_CLK>, |
| <&clock_rpmh RPMH_CXO_CLK>, |
| <&clock_gcc GCC_USB3_PRIM_CLKREF_CLK>, |
| <&clock_gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, |
| <&clock_gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; |
| clock-names = "iface_clk", "ref_clk_src", "ref_clk", |
| "cfg_ahb_clk", "pipe_clk"; |
| clock-rate = <0>; |
| |
| qcom,platform-supply-entries { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| qcom,platform-supply-entry@0 { |
| reg = <0>; |
| qcom,supply-name = "gdsc"; |
| qcom,supply-min-voltage = <0>; |
| qcom,supply-max-voltage = <0>; |
| qcom,supply-enable-load = <0>; |
| qcom,supply-disable-load = <0>; |
| }; |
| |
| }; |
| }; |
| |
| }; |