| /* |
| * linux/arch/arm/mach-realview/realview_pba8.c |
| * |
| * Copyright (C) 2008 ARM Limited |
| * Copyright (C) 2000 Deep Blue Solutions Ltd |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/platform_device.h> |
| #include <linux/sysdev.h> |
| #include <linux/amba/bus.h> |
| #include <linux/amba/pl061.h> |
| #include <linux/amba/mmci.h> |
| #include <linux/io.h> |
| |
| #include <asm/irq.h> |
| #include <asm/leds.h> |
| #include <asm/mach-types.h> |
| #include <asm/hardware/gic.h> |
| #include <asm/hardware/icst307.h> |
| |
| #include <asm/mach/arch.h> |
| #include <asm/mach/map.h> |
| #include <asm/mach/time.h> |
| |
| #include <mach/hardware.h> |
| #include <mach/board-pba8.h> |
| #include <mach/irqs.h> |
| |
| #include "core.h" |
| #include "clock.h" |
| |
| static struct map_desc realview_pba8_io_desc[] __initdata = { |
| { |
| .virtual = IO_ADDRESS(REALVIEW_SYS_BASE), |
| .pfn = __phys_to_pfn(REALVIEW_SYS_BASE), |
| .length = SZ_4K, |
| .type = MT_DEVICE, |
| }, { |
| .virtual = IO_ADDRESS(REALVIEW_PBA8_GIC_CPU_BASE), |
| .pfn = __phys_to_pfn(REALVIEW_PBA8_GIC_CPU_BASE), |
| .length = SZ_4K, |
| .type = MT_DEVICE, |
| }, { |
| .virtual = IO_ADDRESS(REALVIEW_PBA8_GIC_DIST_BASE), |
| .pfn = __phys_to_pfn(REALVIEW_PBA8_GIC_DIST_BASE), |
| .length = SZ_4K, |
| .type = MT_DEVICE, |
| }, { |
| .virtual = IO_ADDRESS(REALVIEW_SCTL_BASE), |
| .pfn = __phys_to_pfn(REALVIEW_SCTL_BASE), |
| .length = SZ_4K, |
| .type = MT_DEVICE, |
| }, { |
| .virtual = IO_ADDRESS(REALVIEW_PBA8_TIMER0_1_BASE), |
| .pfn = __phys_to_pfn(REALVIEW_PBA8_TIMER0_1_BASE), |
| .length = SZ_4K, |
| .type = MT_DEVICE, |
| }, { |
| .virtual = IO_ADDRESS(REALVIEW_PBA8_TIMER2_3_BASE), |
| .pfn = __phys_to_pfn(REALVIEW_PBA8_TIMER2_3_BASE), |
| .length = SZ_4K, |
| .type = MT_DEVICE, |
| }, |
| #ifdef CONFIG_PCI |
| { |
| .virtual = PCIX_UNIT_BASE, |
| .pfn = __phys_to_pfn(REALVIEW_PBA8_PCI_BASE), |
| .length = REALVIEW_PBA8_PCI_BASE_SIZE, |
| .type = MT_DEVICE |
| }, |
| #endif |
| #ifdef CONFIG_DEBUG_LL |
| { |
| .virtual = IO_ADDRESS(REALVIEW_PBA8_UART0_BASE), |
| .pfn = __phys_to_pfn(REALVIEW_PBA8_UART0_BASE), |
| .length = SZ_4K, |
| .type = MT_DEVICE, |
| }, |
| #endif |
| }; |
| |
| static void __init realview_pba8_map_io(void) |
| { |
| iotable_init(realview_pba8_io_desc, ARRAY_SIZE(realview_pba8_io_desc)); |
| } |
| |
| static struct pl061_platform_data gpio0_plat_data = { |
| .gpio_base = 0, |
| .irq_base = -1, |
| }; |
| |
| static struct pl061_platform_data gpio1_plat_data = { |
| .gpio_base = 8, |
| .irq_base = -1, |
| }; |
| |
| static struct pl061_platform_data gpio2_plat_data = { |
| .gpio_base = 16, |
| .irq_base = -1, |
| }; |
| |
| /* |
| * RealView PBA8Core AMBA devices |
| */ |
| |
| #define GPIO2_IRQ { IRQ_PBA8_GPIO2, NO_IRQ } |
| #define GPIO2_DMA { 0, 0 } |
| #define GPIO3_IRQ { IRQ_PBA8_GPIO3, NO_IRQ } |
| #define GPIO3_DMA { 0, 0 } |
| #define AACI_IRQ { IRQ_PBA8_AACI, NO_IRQ } |
| #define AACI_DMA { 0x80, 0x81 } |
| #define MMCI0_IRQ { IRQ_PBA8_MMCI0A, IRQ_PBA8_MMCI0B } |
| #define MMCI0_DMA { 0x84, 0 } |
| #define KMI0_IRQ { IRQ_PBA8_KMI0, NO_IRQ } |
| #define KMI0_DMA { 0, 0 } |
| #define KMI1_IRQ { IRQ_PBA8_KMI1, NO_IRQ } |
| #define KMI1_DMA { 0, 0 } |
| #define PBA8_SMC_IRQ { NO_IRQ, NO_IRQ } |
| #define PBA8_SMC_DMA { 0, 0 } |
| #define MPMC_IRQ { NO_IRQ, NO_IRQ } |
| #define MPMC_DMA { 0, 0 } |
| #define PBA8_CLCD_IRQ { IRQ_PBA8_CLCD, NO_IRQ } |
| #define PBA8_CLCD_DMA { 0, 0 } |
| #define DMAC_IRQ { IRQ_PBA8_DMAC, NO_IRQ } |
| #define DMAC_DMA { 0, 0 } |
| #define SCTL_IRQ { NO_IRQ, NO_IRQ } |
| #define SCTL_DMA { 0, 0 } |
| #define PBA8_WATCHDOG_IRQ { IRQ_PBA8_WATCHDOG, NO_IRQ } |
| #define PBA8_WATCHDOG_DMA { 0, 0 } |
| #define PBA8_GPIO0_IRQ { IRQ_PBA8_GPIO0, NO_IRQ } |
| #define PBA8_GPIO0_DMA { 0, 0 } |
| #define GPIO1_IRQ { IRQ_PBA8_GPIO1, NO_IRQ } |
| #define GPIO1_DMA { 0, 0 } |
| #define PBA8_RTC_IRQ { IRQ_PBA8_RTC, NO_IRQ } |
| #define PBA8_RTC_DMA { 0, 0 } |
| #define SCI_IRQ { IRQ_PBA8_SCI, NO_IRQ } |
| #define SCI_DMA { 7, 6 } |
| #define PBA8_UART0_IRQ { IRQ_PBA8_UART0, NO_IRQ } |
| #define PBA8_UART0_DMA { 15, 14 } |
| #define PBA8_UART1_IRQ { IRQ_PBA8_UART1, NO_IRQ } |
| #define PBA8_UART1_DMA { 13, 12 } |
| #define PBA8_UART2_IRQ { IRQ_PBA8_UART2, NO_IRQ } |
| #define PBA8_UART2_DMA { 11, 10 } |
| #define PBA8_UART3_IRQ { IRQ_PBA8_UART3, NO_IRQ } |
| #define PBA8_UART3_DMA { 0x86, 0x87 } |
| #define PBA8_SSP_IRQ { IRQ_PBA8_SSP, NO_IRQ } |
| #define PBA8_SSP_DMA { 9, 8 } |
| |
| /* FPGA Primecells */ |
| AMBA_DEVICE(aaci, "fpga:aaci", AACI, NULL); |
| AMBA_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data); |
| AMBA_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL); |
| AMBA_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL); |
| AMBA_DEVICE(uart3, "fpga:uart3", PBA8_UART3, NULL); |
| |
| /* DevChip Primecells */ |
| AMBA_DEVICE(smc, "dev:smc", PBA8_SMC, NULL); |
| AMBA_DEVICE(sctl, "dev:sctl", SCTL, NULL); |
| AMBA_DEVICE(wdog, "dev:wdog", PBA8_WATCHDOG, NULL); |
| AMBA_DEVICE(gpio0, "dev:gpio0", PBA8_GPIO0, &gpio0_plat_data); |
| AMBA_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data); |
| AMBA_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data); |
| AMBA_DEVICE(rtc, "dev:rtc", PBA8_RTC, NULL); |
| AMBA_DEVICE(sci0, "dev:sci0", SCI, NULL); |
| AMBA_DEVICE(uart0, "dev:uart0", PBA8_UART0, NULL); |
| AMBA_DEVICE(uart1, "dev:uart1", PBA8_UART1, NULL); |
| AMBA_DEVICE(uart2, "dev:uart2", PBA8_UART2, NULL); |
| AMBA_DEVICE(ssp0, "dev:ssp0", PBA8_SSP, NULL); |
| |
| /* Primecells on the NEC ISSP chip */ |
| AMBA_DEVICE(clcd, "issp:clcd", PBA8_CLCD, &clcd_plat_data); |
| AMBA_DEVICE(dmac, "issp:dmac", DMAC, NULL); |
| |
| static struct amba_device *amba_devs[] __initdata = { |
| &dmac_device, |
| &uart0_device, |
| &uart1_device, |
| &uart2_device, |
| &uart3_device, |
| &smc_device, |
| &clcd_device, |
| &sctl_device, |
| &wdog_device, |
| &gpio0_device, |
| &gpio1_device, |
| &gpio2_device, |
| &rtc_device, |
| &sci0_device, |
| &ssp0_device, |
| &aaci_device, |
| &mmc0_device, |
| &kmi0_device, |
| &kmi1_device, |
| }; |
| |
| /* |
| * RealView PB-A8 platform devices |
| */ |
| static struct resource realview_pba8_flash_resource[] = { |
| [0] = { |
| .start = REALVIEW_PBA8_FLASH0_BASE, |
| .end = REALVIEW_PBA8_FLASH0_BASE + REALVIEW_PBA8_FLASH0_SIZE - 1, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = REALVIEW_PBA8_FLASH1_BASE, |
| .end = REALVIEW_PBA8_FLASH1_BASE + REALVIEW_PBA8_FLASH1_SIZE - 1, |
| .flags = IORESOURCE_MEM, |
| }, |
| }; |
| |
| static struct resource realview_pba8_smsc911x_resources[] = { |
| [0] = { |
| .start = REALVIEW_PBA8_ETH_BASE, |
| .end = REALVIEW_PBA8_ETH_BASE + SZ_64K - 1, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = IRQ_PBA8_ETH, |
| .end = IRQ_PBA8_ETH, |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static struct resource realview_pba8_isp1761_resources[] = { |
| [0] = { |
| .start = REALVIEW_PBA8_USB_BASE, |
| .end = REALVIEW_PBA8_USB_BASE + SZ_128K - 1, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = IRQ_PBA8_USB, |
| .end = IRQ_PBA8_USB, |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static void __init gic_init_irq(void) |
| { |
| /* ARM PB-A8 on-board GIC */ |
| gic_cpu_base_addr = __io_address(REALVIEW_PBA8_GIC_CPU_BASE); |
| gic_dist_init(0, __io_address(REALVIEW_PBA8_GIC_DIST_BASE), IRQ_PBA8_GIC_START); |
| gic_cpu_init(0, __io_address(REALVIEW_PBA8_GIC_CPU_BASE)); |
| } |
| |
| static void __init realview_pba8_timer_init(void) |
| { |
| timer0_va_base = __io_address(REALVIEW_PBA8_TIMER0_1_BASE); |
| timer1_va_base = __io_address(REALVIEW_PBA8_TIMER0_1_BASE) + 0x20; |
| timer2_va_base = __io_address(REALVIEW_PBA8_TIMER2_3_BASE); |
| timer3_va_base = __io_address(REALVIEW_PBA8_TIMER2_3_BASE) + 0x20; |
| |
| realview_timer_init(IRQ_PBA8_TIMER0_1); |
| } |
| |
| static struct sys_timer realview_pba8_timer = { |
| .init = realview_pba8_timer_init, |
| }; |
| |
| static void __init realview_pba8_init(void) |
| { |
| int i; |
| |
| realview_flash_register(realview_pba8_flash_resource, |
| ARRAY_SIZE(realview_pba8_flash_resource)); |
| realview_eth_register(NULL, realview_pba8_smsc911x_resources); |
| platform_device_register(&realview_i2c_device); |
| platform_device_register(&realview_cf_device); |
| realview_usb_register(realview_pba8_isp1761_resources); |
| |
| for (i = 0; i < ARRAY_SIZE(amba_devs); i++) { |
| struct amba_device *d = amba_devs[i]; |
| amba_device_register(d, &iomem_resource); |
| } |
| |
| #ifdef CONFIG_LEDS |
| leds_event = realview_leds_event; |
| #endif |
| } |
| |
| MACHINE_START(REALVIEW_PBA8, "ARM-RealView PB-A8") |
| /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ |
| .phys_io = REALVIEW_PBA8_UART0_BASE, |
| .io_pg_offst = (IO_ADDRESS(REALVIEW_PBA8_UART0_BASE) >> 18) & 0xfffc, |
| .boot_params = PHYS_OFFSET + 0x00000100, |
| .map_io = realview_pba8_map_io, |
| .init_irq = gic_init_irq, |
| .timer = &realview_pba8_timer, |
| .init_machine = realview_pba8_init, |
| MACHINE_END |