| /* |
| * arch/sh/boards/superh/microdev/irq.c |
| * |
| * Copyright (C) 2003 Sean McGoogan (Sean.McGoogan@superh.com) |
| * |
| * SuperH SH4-202 MicroDev board support. |
| * |
| * May be copied or modified under the terms of the GNU General Public |
| * License. See linux/COPYING for more information. |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/irq.h> |
| #include <asm/system.h> |
| #include <asm/io.h> |
| #include <asm/microdev.h> |
| |
| #define NUM_EXTERNAL_IRQS 16 /* IRL0 .. IRL15 */ |
| |
| static const struct { |
| unsigned char fpgaIrq; |
| unsigned char mapped; |
| const char *name; |
| } fpgaIrqTable[NUM_EXTERNAL_IRQS] = { |
| { 0, 0, "unused" }, /* IRQ #0 IRL=15 0x200 */ |
| { MICRODEV_FPGA_IRQ_KEYBOARD, 1, "keyboard" }, /* IRQ #1 IRL=14 0x220 */ |
| { MICRODEV_FPGA_IRQ_SERIAL1, 1, "Serial #1"}, /* IRQ #2 IRL=13 0x240 */ |
| { MICRODEV_FPGA_IRQ_ETHERNET, 1, "Ethernet" }, /* IRQ #3 IRL=12 0x260 */ |
| { MICRODEV_FPGA_IRQ_SERIAL2, 0, "Serial #2"}, /* IRQ #4 IRL=11 0x280 */ |
| { 0, 0, "unused" }, /* IRQ #5 IRL=10 0x2a0 */ |
| { 0, 0, "unused" }, /* IRQ #6 IRL=9 0x2c0 */ |
| { MICRODEV_FPGA_IRQ_USB_HC, 1, "USB" }, /* IRQ #7 IRL=8 0x2e0 */ |
| { MICRODEV_IRQ_PCI_INTA, 1, "PCI INTA" }, /* IRQ #8 IRL=7 0x300 */ |
| { MICRODEV_IRQ_PCI_INTB, 1, "PCI INTB" }, /* IRQ #9 IRL=6 0x320 */ |
| { MICRODEV_IRQ_PCI_INTC, 1, "PCI INTC" }, /* IRQ #10 IRL=5 0x340 */ |
| { MICRODEV_IRQ_PCI_INTD, 1, "PCI INTD" }, /* IRQ #11 IRL=4 0x360 */ |
| { MICRODEV_FPGA_IRQ_MOUSE, 1, "mouse" }, /* IRQ #12 IRL=3 0x380 */ |
| { MICRODEV_FPGA_IRQ_IDE2, 1, "IDE #2" }, /* IRQ #13 IRL=2 0x3a0 */ |
| { MICRODEV_FPGA_IRQ_IDE1, 1, "IDE #1" }, /* IRQ #14 IRL=1 0x3c0 */ |
| { 0, 0, "unused" }, /* IRQ #15 IRL=0 0x3e0 */ |
| }; |
| |
| #if (MICRODEV_LINUX_IRQ_KEYBOARD != 1) |
| # error Inconsistancy in defining the IRQ# for Keyboard! |
| #endif |
| |
| #if (MICRODEV_LINUX_IRQ_ETHERNET != 3) |
| # error Inconsistancy in defining the IRQ# for Ethernet! |
| #endif |
| |
| #if (MICRODEV_LINUX_IRQ_USB_HC != 7) |
| # error Inconsistancy in defining the IRQ# for USB! |
| #endif |
| |
| #if (MICRODEV_LINUX_IRQ_MOUSE != 12) |
| # error Inconsistancy in defining the IRQ# for PS/2 Mouse! |
| #endif |
| |
| #if (MICRODEV_LINUX_IRQ_IDE2 != 13) |
| # error Inconsistancy in defining the IRQ# for secondary IDE! |
| #endif |
| |
| #if (MICRODEV_LINUX_IRQ_IDE1 != 14) |
| # error Inconsistancy in defining the IRQ# for primary IDE! |
| #endif |
| |
| static void enable_microdev_irq(unsigned int irq); |
| static void disable_microdev_irq(unsigned int irq); |
| |
| /* shutdown is same as "disable" */ |
| #define shutdown_microdev_irq disable_microdev_irq |
| |
| static void mask_and_ack_microdev(unsigned int); |
| static void end_microdev_irq(unsigned int irq); |
| |
| static unsigned int startup_microdev_irq(unsigned int irq) |
| { |
| enable_microdev_irq(irq); |
| return 0; /* never anything pending */ |
| } |
| |
| static struct hw_interrupt_type microdev_irq_type = { |
| .typename = "MicroDev-IRQ", |
| .startup = startup_microdev_irq, |
| .shutdown = shutdown_microdev_irq, |
| .enable = enable_microdev_irq, |
| .disable = disable_microdev_irq, |
| .ack = mask_and_ack_microdev, |
| .end = end_microdev_irq |
| }; |
| |
| static void disable_microdev_irq(unsigned int irq) |
| { |
| unsigned int fpgaIrq; |
| |
| if (irq >= NUM_EXTERNAL_IRQS) |
| return; |
| if (!fpgaIrqTable[irq].mapped) |
| return; |
| |
| fpgaIrq = fpgaIrqTable[irq].fpgaIrq; |
| |
| /* disable interupts on the FPGA INTC register */ |
| ctrl_outl(MICRODEV_FPGA_INTC_MASK(fpgaIrq), MICRODEV_FPGA_INTDSB_REG); |
| } |
| |
| static void enable_microdev_irq(unsigned int irq) |
| { |
| unsigned long priorityReg, priorities, pri; |
| unsigned int fpgaIrq; |
| |
| if (unlikely(irq >= NUM_EXTERNAL_IRQS)) |
| return; |
| if (unlikely(!fpgaIrqTable[irq].mapped)) |
| return; |
| |
| pri = 15 - irq; |
| |
| fpgaIrq = fpgaIrqTable[irq].fpgaIrq; |
| priorityReg = MICRODEV_FPGA_INTPRI_REG(fpgaIrq); |
| |
| /* set priority for the interrupt */ |
| priorities = ctrl_inl(priorityReg); |
| priorities &= ~MICRODEV_FPGA_INTPRI_MASK(fpgaIrq); |
| priorities |= MICRODEV_FPGA_INTPRI_LEVEL(fpgaIrq, pri); |
| ctrl_outl(priorities, priorityReg); |
| |
| /* enable interupts on the FPGA INTC register */ |
| ctrl_outl(MICRODEV_FPGA_INTC_MASK(fpgaIrq), MICRODEV_FPGA_INTENB_REG); |
| } |
| |
| /* This functions sets the desired irq handler to be a MicroDev type */ |
| static void __init make_microdev_irq(unsigned int irq) |
| { |
| disable_irq_nosync(irq); |
| irq_desc[irq].chip = µdev_irq_type; |
| disable_microdev_irq(irq); |
| } |
| |
| static void mask_and_ack_microdev(unsigned int irq) |
| { |
| disable_microdev_irq(irq); |
| } |
| |
| static void end_microdev_irq(unsigned int irq) |
| { |
| if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) |
| enable_microdev_irq(irq); |
| } |
| |
| extern void __init init_microdev_irq(void) |
| { |
| int i; |
| |
| /* disable interupts on the FPGA INTC register */ |
| ctrl_outl(~0ul, MICRODEV_FPGA_INTDSB_REG); |
| |
| for (i = 0; i < NUM_EXTERNAL_IRQS; i++) |
| make_microdev_irq(i); |
| } |
| |
| extern void microdev_print_fpga_intc_status(void) |
| { |
| volatile unsigned int * const intenb = (unsigned int*)MICRODEV_FPGA_INTENB_REG; |
| volatile unsigned int * const intdsb = (unsigned int*)MICRODEV_FPGA_INTDSB_REG; |
| volatile unsigned int * const intpria = (unsigned int*)MICRODEV_FPGA_INTPRI_REG(0); |
| volatile unsigned int * const intprib = (unsigned int*)MICRODEV_FPGA_INTPRI_REG(8); |
| volatile unsigned int * const intpric = (unsigned int*)MICRODEV_FPGA_INTPRI_REG(16); |
| volatile unsigned int * const intprid = (unsigned int*)MICRODEV_FPGA_INTPRI_REG(24); |
| volatile unsigned int * const intsrc = (unsigned int*)MICRODEV_FPGA_INTSRC_REG; |
| volatile unsigned int * const intreq = (unsigned int*)MICRODEV_FPGA_INTREQ_REG; |
| |
| printk("-------------------------- microdev_print_fpga_intc_status() ------------------\n"); |
| printk("FPGA_INTENB = 0x%08x\n", *intenb); |
| printk("FPGA_INTDSB = 0x%08x\n", *intdsb); |
| printk("FPGA_INTSRC = 0x%08x\n", *intsrc); |
| printk("FPGA_INTREQ = 0x%08x\n", *intreq); |
| printk("FPGA_INTPRI[3..0] = %08x:%08x:%08x:%08x\n", *intprid, *intpric, *intprib, *intpria); |
| printk("-------------------------------------------------------------------------------\n"); |
| } |
| |
| |