iwlegacy: rename IL_DEBUG_ to D_
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
diff --git a/drivers/net/wireless/iwlegacy/iwl-scan.c b/drivers/net/wireless/iwlegacy/iwl-scan.c
index 5a967d2..c534dce 100644
--- a/drivers/net/wireless/iwlegacy/iwl-scan.c
+++ b/drivers/net/wireless/iwlegacy/iwl-scan.c
@@ -85,7 +85,7 @@
* can occur if we send the scan abort before we
* the microcode has notified us that a scan is
* completed. */
- IL_DEBUG_SCAN(il, "SCAN_ABORT ret %d.\n", pkt->u.status);
+ D_SCAN("SCAN_ABORT ret %d.\n", pkt->u.status);
ret = -EIO;
}
@@ -97,7 +97,7 @@
{
/* check if scan was requested from mac80211 */
if (il->scan_request) {
- IL_DEBUG_SCAN(il, "Complete scan in mac80211\n");
+ D_SCAN("Complete scan in mac80211\n");
ieee80211_scan_completed(il->hw, aborted);
}
@@ -110,11 +110,11 @@
lockdep_assert_held(&il->mutex);
if (!test_bit(STATUS_SCANNING, &il->status)) {
- IL_DEBUG_SCAN(il, "Forcing scan end while not scanning\n");
+ D_SCAN("Forcing scan end while not scanning\n");
return;
}
- IL_DEBUG_SCAN(il, "Forcing scan end\n");
+ D_SCAN("Forcing scan end\n");
clear_bit(STATUS_SCANNING, &il->status);
clear_bit(STATUS_SCAN_HW, &il->status);
clear_bit(STATUS_SCAN_ABORTING, &il->status);
@@ -128,21 +128,21 @@
lockdep_assert_held(&il->mutex);
if (!test_bit(STATUS_SCANNING, &il->status)) {
- IL_DEBUG_SCAN(il, "Not performing scan to abort\n");
+ D_SCAN("Not performing scan to abort\n");
return;
}
if (test_and_set_bit(STATUS_SCAN_ABORTING, &il->status)) {
- IL_DEBUG_SCAN(il, "Scan abort in progress\n");
+ D_SCAN("Scan abort in progress\n");
return;
}
ret = il_send_scan_abort(il);
if (ret) {
- IL_DEBUG_SCAN(il, "Send scan abort failed %d\n", ret);
+ D_SCAN("Send scan abort failed %d\n", ret);
il_force_scan_end(il);
} else
- IL_DEBUG_SCAN(il, "Successfully send scan abort\n");
+ D_SCAN("Successfully send scan abort\n");
}
/**
@@ -150,7 +150,7 @@
*/
int il_scan_cancel(struct il_priv *il)
{
- IL_DEBUG_SCAN(il, "Queuing abort scan\n");
+ D_SCAN("Queuing abort scan\n");
queue_work(il->workqueue, &il->abort_scan);
return 0;
}
@@ -167,7 +167,7 @@
lockdep_assert_held(&il->mutex);
- IL_DEBUG_SCAN(il, "Scan cancel timeout\n");
+ D_SCAN("Scan cancel timeout\n");
il_do_scan_abort(il);
@@ -190,7 +190,7 @@
struct il_scanreq_notification *notif =
(struct il_scanreq_notification *)pkt->u.raw;
- IL_DEBUG_SCAN(il, "Scan request status = 0x%x\n", notif->status);
+ D_SCAN("Scan request status = 0x%x\n", notif->status);
#endif
}
@@ -202,7 +202,7 @@
struct il_scanstart_notification *notif =
(struct il_scanstart_notification *)pkt->u.raw;
il->scan_start_tsf = le32_to_cpu(notif->tsf_low);
- IL_DEBUG_SCAN(il, "Scan start: "
+ D_SCAN("Scan start: "
"%d [802.11%s] "
"(TSF: 0x%08X:%08X) - %d (beacon timer %u)\n",
notif->channel,
@@ -221,7 +221,7 @@
struct il_scanresults_notification *notif =
(struct il_scanresults_notification *)pkt->u.raw;
- IL_DEBUG_SCAN(il, "Scan ch.res: "
+ D_SCAN("Scan ch.res: "
"%d [802.11%s] "
"(TSF: 0x%08X:%08X) - %d "
"elapsed=%lu usec\n",
@@ -244,7 +244,7 @@
struct il_scancomplete_notification *scan_notif = (void *)pkt->u.raw;
#endif
- IL_DEBUG_SCAN(il,
+ D_SCAN(
"Scan complete: %d channels (TSF 0x%08X:%08X) - %d\n",
scan_notif->scanned_channels,
scan_notif->tsf_low,
@@ -253,7 +253,7 @@
/* The HW is no longer scanning */
clear_bit(STATUS_SCAN_HW, &il->status);
- IL_DEBUG_SCAN(il, "Scan on %sGHz took %dms\n",
+ D_SCAN("Scan on %sGHz took %dms\n",
(il->scan_band == IEEE80211_BAND_2GHZ) ? "2.4" : "5.2",
jiffies_to_msecs(jiffies - il->scan_start));
@@ -346,17 +346,17 @@
}
if (test_bit(STATUS_SCAN_HW, &il->status)) {
- IL_DEBUG_SCAN(il,
+ D_SCAN(
"Multiple concurrent scan requests in parallel.\n");
return -EBUSY;
}
if (test_bit(STATUS_SCAN_ABORTING, &il->status)) {
- IL_DEBUG_SCAN(il, "Scan request while abort pending.\n");
+ D_SCAN("Scan request while abort pending.\n");
return -EBUSY;
}
- IL_DEBUG_SCAN(il, "Starting scan...\n");
+ D_SCAN("Starting scan...\n");
set_bit(STATUS_SCANNING, &il->status);
il->scan_start = jiffies;
@@ -380,7 +380,7 @@
struct il_priv *il = hw->priv;
int ret;
- IL_DEBUG_MAC80211(il, "enter\n");
+ D_MAC80211("enter\n");
if (req->n_channels == 0)
return -EINVAL;
@@ -388,7 +388,7 @@
mutex_lock(&il->mutex);
if (test_bit(STATUS_SCANNING, &il->status)) {
- IL_DEBUG_SCAN(il, "Scan already in progress.\n");
+ D_SCAN("Scan already in progress.\n");
ret = -EAGAIN;
goto out_unlock;
}
@@ -400,7 +400,7 @@
ret = il_scan_initiate(il, vif);
- IL_DEBUG_MAC80211(il, "leave\n");
+ D_MAC80211("leave\n");
out_unlock:
mutex_unlock(&il->mutex);
@@ -414,7 +414,7 @@
struct il_priv *il =
container_of(data, struct il_priv, scan_check.work);
- IL_DEBUG_SCAN(il, "Scan check work\n");
+ D_SCAN("Scan check work\n");
/* Since we are here firmware does not finish scan and
* most likely is in bad shape, so we don't bother to
@@ -477,7 +477,7 @@
{
struct il_priv *il = container_of(work, struct il_priv, abort_scan);
- IL_DEBUG_SCAN(il, "Abort scan work\n");
+ D_SCAN("Abort scan work\n");
/* We keep scan_check work queued in case when firmware will not
* report back scan completed notification */
@@ -492,7 +492,7 @@
container_of(work, struct il_priv, scan_completed);
bool aborted;
- IL_DEBUG_SCAN(il, "Completed scan.\n");
+ D_SCAN("Completed scan.\n");
cancel_delayed_work(&il->scan_check);
@@ -500,10 +500,10 @@
aborted = test_and_clear_bit(STATUS_SCAN_ABORTING, &il->status);
if (aborted)
- IL_DEBUG_SCAN(il, "Aborted scan completed.\n");
+ D_SCAN("Aborted scan completed.\n");
if (!test_and_clear_bit(STATUS_SCANNING, &il->status)) {
- IL_DEBUG_SCAN(il, "Scan already completed.\n");
+ D_SCAN("Scan already completed.\n");
goto out_settings;
}