| /* |
| * This module provides common API for accessing firmware configuration pages |
| * |
| * This code is based on drivers/scsi/mpt2sas/mpt2_base.c |
| * Copyright (C) 2007-2008 LSI Corporation |
| * (mailto:DL-MPTFusionLinux@lsi.com) |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version 2 |
| * of the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * NO WARRANTY |
| * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR |
| * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT |
| * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, |
| * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is |
| * solely responsible for determining the appropriateness of using and |
| * distributing the Program and assumes all risks associated with its |
| * exercise of rights under this Agreement, including but not limited to |
| * the risks and costs of program errors, damage to or loss of data, |
| * programs or equipment, and unavailability or interruption of operations. |
| |
| * DISCLAIMER OF LIABILITY |
| * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY |
| * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND |
| * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR |
| * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE |
| * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED |
| * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES |
| |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, |
| * USA. |
| */ |
| |
| #include <linux/version.h> |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/errno.h> |
| #include <linux/blkdev.h> |
| #include <linux/sched.h> |
| #include <linux/workqueue.h> |
| #include <linux/delay.h> |
| #include <linux/pci.h> |
| |
| #include "mpt2sas_base.h" |
| |
| /* local definitions */ |
| |
| /* Timeout for config page request (in seconds) */ |
| #define MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT 15 |
| |
| /* Common sgl flags for READING a config page. */ |
| #define MPT2_CONFIG_COMMON_SGLFLAGS ((MPI2_SGE_FLAGS_SIMPLE_ELEMENT | \ |
| MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER \ |
| | MPI2_SGE_FLAGS_END_OF_LIST) << MPI2_SGE_FLAGS_SHIFT) |
| |
| /* Common sgl flags for WRITING a config page. */ |
| #define MPT2_CONFIG_COMMON_WRITE_SGLFLAGS ((MPI2_SGE_FLAGS_SIMPLE_ELEMENT | \ |
| MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER \ |
| | MPI2_SGE_FLAGS_END_OF_LIST | MPI2_SGE_FLAGS_HOST_TO_IOC) \ |
| << MPI2_SGE_FLAGS_SHIFT) |
| |
| /** |
| * struct config_request - obtain dma memory via routine |
| * @config_page_sz: size |
| * @config_page: virt pointer |
| * @config_page_dma: phys pointer |
| * |
| */ |
| struct config_request{ |
| u16 config_page_sz; |
| void *config_page; |
| dma_addr_t config_page_dma; |
| }; |
| |
| #ifdef CONFIG_SCSI_MPT2SAS_LOGGING |
| /** |
| * _config_display_some_debug - debug routine |
| * @ioc: per adapter object |
| * @smid: system request message index |
| * @calling_function_name: string pass from calling function |
| * @mpi_reply: reply message frame |
| * Context: none. |
| * |
| * Function for displaying debug info helpfull when debugging issues |
| * in this module. |
| */ |
| static void |
| _config_display_some_debug(struct MPT2SAS_ADAPTER *ioc, u16 smid, |
| char *calling_function_name, MPI2DefaultReply_t *mpi_reply) |
| { |
| Mpi2ConfigRequest_t *mpi_request; |
| char *desc = NULL; |
| |
| if (!(ioc->logging_level & MPT_DEBUG_CONFIG)) |
| return; |
| |
| mpi_request = mpt2sas_base_get_msg_frame(ioc, smid); |
| switch (mpi_request->Header.PageType & MPI2_CONFIG_PAGETYPE_MASK) { |
| case MPI2_CONFIG_PAGETYPE_IO_UNIT: |
| desc = "io_unit"; |
| break; |
| case MPI2_CONFIG_PAGETYPE_IOC: |
| desc = "ioc"; |
| break; |
| case MPI2_CONFIG_PAGETYPE_BIOS: |
| desc = "bios"; |
| break; |
| case MPI2_CONFIG_PAGETYPE_RAID_VOLUME: |
| desc = "raid_volume"; |
| break; |
| case MPI2_CONFIG_PAGETYPE_MANUFACTURING: |
| desc = "manufaucturing"; |
| break; |
| case MPI2_CONFIG_PAGETYPE_RAID_PHYSDISK: |
| desc = "physdisk"; |
| break; |
| case MPI2_CONFIG_PAGETYPE_EXTENDED: |
| switch (mpi_request->ExtPageType) { |
| case MPI2_CONFIG_EXTPAGETYPE_SAS_IO_UNIT: |
| desc = "sas_io_unit"; |
| break; |
| case MPI2_CONFIG_EXTPAGETYPE_SAS_EXPANDER: |
| desc = "sas_expander"; |
| break; |
| case MPI2_CONFIG_EXTPAGETYPE_SAS_DEVICE: |
| desc = "sas_device"; |
| break; |
| case MPI2_CONFIG_EXTPAGETYPE_SAS_PHY: |
| desc = "sas_phy"; |
| break; |
| case MPI2_CONFIG_EXTPAGETYPE_LOG: |
| desc = "log"; |
| break; |
| case MPI2_CONFIG_EXTPAGETYPE_ENCLOSURE: |
| desc = "enclosure"; |
| break; |
| case MPI2_CONFIG_EXTPAGETYPE_RAID_CONFIG: |
| desc = "raid_config"; |
| break; |
| case MPI2_CONFIG_EXTPAGETYPE_DRIVER_MAPPING: |
| desc = "driver_mappping"; |
| break; |
| } |
| break; |
| } |
| |
| if (!desc) |
| return; |
| |
| printk(MPT2SAS_DEBUG_FMT "%s: %s(%d), action(%d), form(0x%08x), " |
| "smid(%d)\n", ioc->name, calling_function_name, desc, |
| mpi_request->Header.PageNumber, mpi_request->Action, |
| le32_to_cpu(mpi_request->PageAddress), smid); |
| |
| if (!mpi_reply) |
| return; |
| |
| if (mpi_reply->IOCStatus || mpi_reply->IOCLogInfo) |
| printk(MPT2SAS_DEBUG_FMT |
| "\tiocstatus(0x%04x), loginfo(0x%08x)\n", |
| ioc->name, le16_to_cpu(mpi_reply->IOCStatus), |
| le32_to_cpu(mpi_reply->IOCLogInfo)); |
| } |
| #endif |
| |
| /** |
| * mpt2sas_config_done - config page completion routine |
| * @ioc: per adapter object |
| * @smid: system request message index |
| * @VF_ID: virtual function id |
| * @reply: reply message frame(lower 32bit addr) |
| * Context: none. |
| * |
| * The callback handler when using _config_request. |
| * |
| * Return nothing. |
| */ |
| void |
| mpt2sas_config_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 VF_ID, u32 reply) |
| { |
| MPI2DefaultReply_t *mpi_reply; |
| |
| if (ioc->config_cmds.status == MPT2_CMD_NOT_USED) |
| return; |
| if (ioc->config_cmds.smid != smid) |
| return; |
| ioc->config_cmds.status |= MPT2_CMD_COMPLETE; |
| mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply); |
| if (mpi_reply) { |
| ioc->config_cmds.status |= MPT2_CMD_REPLY_VALID; |
| memcpy(ioc->config_cmds.reply, mpi_reply, |
| mpi_reply->MsgLength*4); |
| } |
| ioc->config_cmds.status &= ~MPT2_CMD_PENDING; |
| #ifdef CONFIG_SCSI_MPT2SAS_LOGGING |
| _config_display_some_debug(ioc, smid, "config_done", mpi_reply); |
| #endif |
| complete(&ioc->config_cmds.done); |
| } |
| |
| /** |
| * _config_request - main routine for sending config page requests |
| * @ioc: per adapter object |
| * @mpi_request: request message frame |
| * @mpi_reply: reply mf payload returned from firmware |
| * @timeout: timeout in seconds |
| * Context: sleep, the calling function needs to acquire the config_cmds.mutex |
| * |
| * A generic API for config page requests to firmware. |
| * |
| * The ioc->config_cmds.status flag should be MPT2_CMD_NOT_USED before calling |
| * this API. |
| * |
| * The callback index is set inside `ioc->config_cb_idx. |
| * |
| * Returns 0 for success, non-zero for failure. |
| */ |
| static int |
| _config_request(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigRequest_t |
| *mpi_request, Mpi2ConfigReply_t *mpi_reply, int timeout) |
| { |
| u16 smid; |
| u32 ioc_state; |
| unsigned long timeleft; |
| Mpi2ConfigRequest_t *config_request; |
| int r; |
| u8 retry_count; |
| u8 issue_host_reset = 0; |
| u16 wait_state_count; |
| |
| mutex_lock(&ioc->config_cmds.mutex); |
| if (ioc->config_cmds.status != MPT2_CMD_NOT_USED) { |
| printk(MPT2SAS_ERR_FMT "%s: config_cmd in use\n", |
| ioc->name, __func__); |
| mutex_unlock(&ioc->config_cmds.mutex); |
| return -EAGAIN; |
| } |
| retry_count = 0; |
| |
| retry_config: |
| if (retry_count) { |
| if (retry_count > 2) /* attempt only 2 retries */ |
| return -EFAULT; |
| printk(MPT2SAS_INFO_FMT "%s: attempting retry (%d)\n", |
| ioc->name, __func__, retry_count); |
| } |
| wait_state_count = 0; |
| ioc_state = mpt2sas_base_get_iocstate(ioc, 1); |
| while (ioc_state != MPI2_IOC_STATE_OPERATIONAL) { |
| if (wait_state_count++ == MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT) { |
| printk(MPT2SAS_ERR_FMT |
| "%s: failed due to ioc not operational\n", |
| ioc->name, __func__); |
| r = -EFAULT; |
| goto out; |
| } |
| ssleep(1); |
| ioc_state = mpt2sas_base_get_iocstate(ioc, 1); |
| printk(MPT2SAS_INFO_FMT "%s: waiting for " |
| "operational state(count=%d)\n", ioc->name, |
| __func__, wait_state_count); |
| } |
| if (wait_state_count) |
| printk(MPT2SAS_INFO_FMT "%s: ioc is operational\n", |
| ioc->name, __func__); |
| |
| smid = mpt2sas_base_get_smid(ioc, ioc->config_cb_idx); |
| if (!smid) { |
| printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n", |
| ioc->name, __func__); |
| r = -EAGAIN; |
| goto out; |
| } |
| |
| r = 0; |
| memset(mpi_reply, 0, sizeof(Mpi2ConfigReply_t)); |
| ioc->config_cmds.status = MPT2_CMD_PENDING; |
| config_request = mpt2sas_base_get_msg_frame(ioc, smid); |
| ioc->config_cmds.smid = smid; |
| memcpy(config_request, mpi_request, sizeof(Mpi2ConfigRequest_t)); |
| #ifdef CONFIG_SCSI_MPT2SAS_LOGGING |
| _config_display_some_debug(ioc, smid, "config_request", NULL); |
| #endif |
| mpt2sas_base_put_smid_default(ioc, smid, config_request->VF_ID); |
| timeleft = wait_for_completion_timeout(&ioc->config_cmds.done, |
| timeout*HZ); |
| if (!(ioc->config_cmds.status & MPT2_CMD_COMPLETE)) { |
| printk(MPT2SAS_ERR_FMT "%s: timeout\n", |
| ioc->name, __func__); |
| _debug_dump_mf(mpi_request, |
| sizeof(Mpi2ConfigRequest_t)/4); |
| retry_count++; |
| if (ioc->config_cmds.smid == smid) |
| mpt2sas_base_free_smid(ioc, smid); |
| if ((ioc->shost_recovery) || |
| (ioc->config_cmds.status & MPT2_CMD_RESET)) |
| goto retry_config; |
| issue_host_reset = 1; |
| r = -EFAULT; |
| goto out; |
| } |
| if (ioc->config_cmds.status & MPT2_CMD_REPLY_VALID) |
| memcpy(mpi_reply, ioc->config_cmds.reply, |
| sizeof(Mpi2ConfigReply_t)); |
| if (retry_count) |
| printk(MPT2SAS_INFO_FMT "%s: retry completed!!\n", |
| ioc->name, __func__); |
| out: |
| ioc->config_cmds.status = MPT2_CMD_NOT_USED; |
| mutex_unlock(&ioc->config_cmds.mutex); |
| if (issue_host_reset) |
| mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP, |
| FORCE_BIG_HAMMER); |
| return r; |
| } |
| |
| /** |
| * _config_alloc_config_dma_memory - obtain physical memory |
| * @ioc: per adapter object |
| * @mem: struct config_request |
| * |
| * A wrapper for obtaining dma-able memory for config page request. |
| * |
| * Returns 0 for success, non-zero for failure. |
| */ |
| static int |
| _config_alloc_config_dma_memory(struct MPT2SAS_ADAPTER *ioc, |
| struct config_request *mem) |
| { |
| int r = 0; |
| |
| mem->config_page = pci_alloc_consistent(ioc->pdev, mem->config_page_sz, |
| &mem->config_page_dma); |
| if (!mem->config_page) |
| r = -ENOMEM; |
| return r; |
| } |
| |
| /** |
| * _config_free_config_dma_memory - wrapper to free the memory |
| * @ioc: per adapter object |
| * @mem: struct config_request |
| * |
| * A wrapper to free dma-able memory when using _config_alloc_config_dma_memory. |
| * |
| * Returns 0 for success, non-zero for failure. |
| */ |
| static void |
| _config_free_config_dma_memory(struct MPT2SAS_ADAPTER *ioc, |
| struct config_request *mem) |
| { |
| pci_free_consistent(ioc->pdev, mem->config_page_sz, mem->config_page, |
| mem->config_page_dma); |
| } |
| |
| /** |
| * mpt2sas_config_get_manufacturing_pg0 - obtain manufacturing page 0 |
| * @ioc: per adapter object |
| * @mpi_reply: reply mf payload returned from firmware |
| * @config_page: contents of the config page |
| * Context: sleep. |
| * |
| * Returns 0 for success, non-zero for failure. |
| */ |
| int |
| mpt2sas_config_get_manufacturing_pg0(struct MPT2SAS_ADAPTER *ioc, |
| Mpi2ConfigReply_t *mpi_reply, Mpi2ManufacturingPage0_t *config_page) |
| { |
| Mpi2ConfigRequest_t mpi_request; |
| int r; |
| struct config_request mem; |
| |
| memset(config_page, 0, sizeof(Mpi2ManufacturingPage0_t)); |
| memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); |
| mpi_request.Function = MPI2_FUNCTION_CONFIG; |
| mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; |
| mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_MANUFACTURING; |
| mpi_request.Header.PageNumber = 0; |
| mpi_request.Header.PageVersion = MPI2_MANUFACTURING0_PAGEVERSION; |
| mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE); |
| r = _config_request(ioc, &mpi_request, mpi_reply, |
| MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); |
| if (r) |
| goto out; |
| |
| mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; |
| mpi_request.Header.PageVersion = mpi_reply->Header.PageVersion; |
| mpi_request.Header.PageNumber = mpi_reply->Header.PageNumber; |
| mpi_request.Header.PageType = mpi_reply->Header.PageType; |
| mpi_request.Header.PageLength = mpi_reply->Header.PageLength; |
| mem.config_page_sz = le16_to_cpu(mpi_reply->Header.PageLength) * 4; |
| if (mem.config_page_sz > ioc->config_page_sz) { |
| r = _config_alloc_config_dma_memory(ioc, &mem); |
| if (r) |
| goto out; |
| } else { |
| mem.config_page_dma = ioc->config_page_dma; |
| mem.config_page = ioc->config_page; |
| } |
| ioc->base_add_sg_single(&mpi_request.PageBufferSGE, |
| MPT2_CONFIG_COMMON_SGLFLAGS | mem.config_page_sz, |
| mem.config_page_dma); |
| r = _config_request(ioc, &mpi_request, mpi_reply, |
| MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); |
| if (!r) |
| memcpy(config_page, mem.config_page, |
| min_t(u16, mem.config_page_sz, |
| sizeof(Mpi2ManufacturingPage0_t))); |
| |
| if (mem.config_page_sz > ioc->config_page_sz) |
| _config_free_config_dma_memory(ioc, &mem); |
| |
| out: |
| return r; |
| } |
| |
| /** |
| * mpt2sas_config_get_bios_pg2 - obtain bios page 2 |
| * @ioc: per adapter object |
| * @mpi_reply: reply mf payload returned from firmware |
| * @config_page: contents of the config page |
| * Context: sleep. |
| * |
| * Returns 0 for success, non-zero for failure. |
| */ |
| int |
| mpt2sas_config_get_bios_pg2(struct MPT2SAS_ADAPTER *ioc, |
| Mpi2ConfigReply_t *mpi_reply, Mpi2BiosPage2_t *config_page) |
| { |
| Mpi2ConfigRequest_t mpi_request; |
| int r; |
| struct config_request mem; |
| |
| memset(config_page, 0, sizeof(Mpi2BiosPage2_t)); |
| memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); |
| mpi_request.Function = MPI2_FUNCTION_CONFIG; |
| mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; |
| mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_BIOS; |
| mpi_request.Header.PageNumber = 2; |
| mpi_request.Header.PageVersion = MPI2_BIOSPAGE2_PAGEVERSION; |
| mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE); |
| r = _config_request(ioc, &mpi_request, mpi_reply, |
| MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); |
| if (r) |
| goto out; |
| |
| mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; |
| mpi_request.Header.PageVersion = mpi_reply->Header.PageVersion; |
| mpi_request.Header.PageNumber = mpi_reply->Header.PageNumber; |
| mpi_request.Header.PageType = mpi_reply->Header.PageType; |
| mpi_request.Header.PageLength = mpi_reply->Header.PageLength; |
| mem.config_page_sz = le16_to_cpu(mpi_reply->Header.PageLength) * 4; |
| if (mem.config_page_sz > ioc->config_page_sz) { |
| r = _config_alloc_config_dma_memory(ioc, &mem); |
| if (r) |
| goto out; |
| } else { |
| mem.config_page_dma = ioc->config_page_dma; |
| mem.config_page = ioc->config_page; |
| } |
| ioc->base_add_sg_single(&mpi_request.PageBufferSGE, |
| MPT2_CONFIG_COMMON_SGLFLAGS | mem.config_page_sz, |
| mem.config_page_dma); |
| r = _config_request(ioc, &mpi_request, mpi_reply, |
| MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); |
| if (!r) |
| memcpy(config_page, mem.config_page, |
| min_t(u16, mem.config_page_sz, |
| sizeof(Mpi2BiosPage2_t))); |
| |
| if (mem.config_page_sz > ioc->config_page_sz) |
| _config_free_config_dma_memory(ioc, &mem); |
| |
| out: |
| return r; |
| } |
| |
| /** |
| * mpt2sas_config_get_bios_pg3 - obtain bios page 3 |
| * @ioc: per adapter object |
| * @mpi_reply: reply mf payload returned from firmware |
| * @config_page: contents of the config page |
| * Context: sleep. |
| * |
| * Returns 0 for success, non-zero for failure. |
| */ |
| int |
| mpt2sas_config_get_bios_pg3(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t |
| *mpi_reply, Mpi2BiosPage3_t *config_page) |
| { |
| Mpi2ConfigRequest_t mpi_request; |
| int r; |
| struct config_request mem; |
| |
| memset(config_page, 0, sizeof(Mpi2BiosPage3_t)); |
| memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); |
| mpi_request.Function = MPI2_FUNCTION_CONFIG; |
| mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; |
| mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_BIOS; |
| mpi_request.Header.PageNumber = 3; |
| mpi_request.Header.PageVersion = MPI2_BIOSPAGE3_PAGEVERSION; |
| mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE); |
| r = _config_request(ioc, &mpi_request, mpi_reply, |
| MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); |
| if (r) |
| goto out; |
| |
| mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; |
| mpi_request.Header.PageVersion = mpi_reply->Header.PageVersion; |
| mpi_request.Header.PageNumber = mpi_reply->Header.PageNumber; |
| mpi_request.Header.PageType = mpi_reply->Header.PageType; |
| mpi_request.Header.PageLength = mpi_reply->Header.PageLength; |
| mem.config_page_sz = le16_to_cpu(mpi_reply->Header.PageLength) * 4; |
| if (mem.config_page_sz > ioc->config_page_sz) { |
| r = _config_alloc_config_dma_memory(ioc, &mem); |
| if (r) |
| goto out; |
| } else { |
| mem.config_page_dma = ioc->config_page_dma; |
| mem.config_page = ioc->config_page; |
| } |
| ioc->base_add_sg_single(&mpi_request.PageBufferSGE, |
| MPT2_CONFIG_COMMON_SGLFLAGS | mem.config_page_sz, |
| mem.config_page_dma); |
| r = _config_request(ioc, &mpi_request, mpi_reply, |
| MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); |
| if (!r) |
| memcpy(config_page, mem.config_page, |
| min_t(u16, mem.config_page_sz, |
| sizeof(Mpi2BiosPage3_t))); |
| |
| if (mem.config_page_sz > ioc->config_page_sz) |
| _config_free_config_dma_memory(ioc, &mem); |
| |
| out: |
| return r; |
| } |
| |
| /** |
| * mpt2sas_config_get_iounit_pg0 - obtain iounit page 0 |
| * @ioc: per adapter object |
| * @mpi_reply: reply mf payload returned from firmware |
| * @config_page: contents of the config page |
| * Context: sleep. |
| * |
| * Returns 0 for success, non-zero for failure. |
| */ |
| int |
| mpt2sas_config_get_iounit_pg0(struct MPT2SAS_ADAPTER *ioc, |
| Mpi2ConfigReply_t *mpi_reply, Mpi2IOUnitPage0_t *config_page) |
| { |
| Mpi2ConfigRequest_t mpi_request; |
| int r; |
| struct config_request mem; |
| |
| memset(config_page, 0, sizeof(Mpi2IOUnitPage0_t)); |
| memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); |
| mpi_request.Function = MPI2_FUNCTION_CONFIG; |
| mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; |
| mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_IO_UNIT; |
| mpi_request.Header.PageNumber = 0; |
| mpi_request.Header.PageVersion = MPI2_IOUNITPAGE0_PAGEVERSION; |
| mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE); |
| r = _config_request(ioc, &mpi_request, mpi_reply, |
| MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); |
| if (r) |
| goto out; |
| |
| mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; |
| mpi_request.Header.PageVersion = mpi_reply->Header.PageVersion; |
| mpi_request.Header.PageNumber = mpi_reply->Header.PageNumber; |
| mpi_request.Header.PageType = mpi_reply->Header.PageType; |
| mpi_request.Header.PageLength = mpi_reply->Header.PageLength; |
| mem.config_page_sz = le16_to_cpu(mpi_reply->Header.PageLength) * 4; |
| if (mem.config_page_sz > ioc->config_page_sz) { |
| r = _config_alloc_config_dma_memory(ioc, &mem); |
| if (r) |
| goto out; |
| } else { |
| mem.config_page_dma = ioc->config_page_dma; |
| mem.config_page = ioc->config_page; |
| } |
| ioc->base_add_sg_single(&mpi_request.PageBufferSGE, |
| MPT2_CONFIG_COMMON_SGLFLAGS | mem.config_page_sz, |
| mem.config_page_dma); |
| r = _config_request(ioc, &mpi_request, mpi_reply, |
| MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); |
| if (!r) |
| memcpy(config_page, mem.config_page, |
| min_t(u16, mem.config_page_sz, |
| sizeof(Mpi2IOUnitPage0_t))); |
| |
| if (mem.config_page_sz > ioc->config_page_sz) |
| _config_free_config_dma_memory(ioc, &mem); |
| |
| out: |
| return r; |
| } |
| |
| /** |
| * mpt2sas_config_get_iounit_pg1 - obtain iounit page 1 |
| * @ioc: per adapter object |
| * @mpi_reply: reply mf payload returned from firmware |
| * @config_page: contents of the config page |
| * Context: sleep. |
| * |
| * Returns 0 for success, non-zero for failure. |
| */ |
| int |
| mpt2sas_config_get_iounit_pg1(struct MPT2SAS_ADAPTER *ioc, |
| Mpi2ConfigReply_t *mpi_reply, Mpi2IOUnitPage1_t *config_page) |
| { |
| Mpi2ConfigRequest_t mpi_request; |
| int r; |
| struct config_request mem; |
| |
| memset(config_page, 0, sizeof(Mpi2IOUnitPage1_t)); |
| memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); |
| mpi_request.Function = MPI2_FUNCTION_CONFIG; |
| mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; |
| mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_IO_UNIT; |
| mpi_request.Header.PageNumber = 1; |
| mpi_request.Header.PageVersion = MPI2_IOUNITPAGE1_PAGEVERSION; |
| mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE); |
| r = _config_request(ioc, &mpi_request, mpi_reply, |
| MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); |
| if (r) |
| goto out; |
| |
| mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; |
| mpi_request.Header.PageVersion = mpi_reply->Header.PageVersion; |
| mpi_request.Header.PageNumber = mpi_reply->Header.PageNumber; |
| mpi_request.Header.PageType = mpi_reply->Header.PageType; |
| mpi_request.Header.PageLength = mpi_reply->Header.PageLength; |
| mem.config_page_sz = le16_to_cpu(mpi_reply->Header.PageLength) * 4; |
| if (mem.config_page_sz > ioc->config_page_sz) { |
| r = _config_alloc_config_dma_memory(ioc, &mem); |
| if (r) |
| goto out; |
| } else { |
| mem.config_page_dma = ioc->config_page_dma; |
| mem.config_page = ioc->config_page; |
| } |
| ioc->base_add_sg_single(&mpi_request.PageBufferSGE, |
| MPT2_CONFIG_COMMON_SGLFLAGS | mem.config_page_sz, |
| mem.config_page_dma); |
| r = _config_request(ioc, &mpi_request, mpi_reply, |
| MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); |
| if (!r) |
| memcpy(config_page, mem.config_page, |
| min_t(u16, mem.config_page_sz, |
| sizeof(Mpi2IOUnitPage1_t))); |
| |
| if (mem.config_page_sz > ioc->config_page_sz) |
| _config_free_config_dma_memory(ioc, &mem); |
| |
| out: |
| return r; |
| } |
| |
| /** |
| * mpt2sas_config_set_iounit_pg1 - set iounit page 1 |
| * @ioc: per adapter object |
| * @mpi_reply: reply mf payload returned from firmware |
| * @config_page: contents of the config page |
| * Context: sleep. |
| * |
| * Returns 0 for success, non-zero for failure. |
| */ |
| int |
| mpt2sas_config_set_iounit_pg1(struct MPT2SAS_ADAPTER *ioc, |
| Mpi2ConfigReply_t *mpi_reply, Mpi2IOUnitPage1_t config_page) |
| { |
| Mpi2ConfigRequest_t mpi_request; |
| int r; |
| struct config_request mem; |
| |
| memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); |
| mpi_request.Function = MPI2_FUNCTION_CONFIG; |
| mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; |
| mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_IO_UNIT; |
| mpi_request.Header.PageNumber = 1; |
| mpi_request.Header.PageVersion = MPI2_IOUNITPAGE1_PAGEVERSION; |
| mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE); |
| r = _config_request(ioc, &mpi_request, mpi_reply, |
| MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); |
| if (r) |
| goto out; |
| |
| mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_WRITE_CURRENT; |
| mpi_request.Header.PageVersion = mpi_reply->Header.PageVersion; |
| mpi_request.Header.PageNumber = mpi_reply->Header.PageNumber; |
| mpi_request.Header.PageType = mpi_reply->Header.PageType; |
| mpi_request.Header.PageLength = mpi_reply->Header.PageLength; |
| mem.config_page_sz = le16_to_cpu(mpi_reply->Header.PageLength) * 4; |
| if (mem.config_page_sz > ioc->config_page_sz) { |
| r = _config_alloc_config_dma_memory(ioc, &mem); |
| if (r) |
| goto out; |
| } else { |
| mem.config_page_dma = ioc->config_page_dma; |
| mem.config_page = ioc->config_page; |
| } |
| |
| memset(mem.config_page, 0, mem.config_page_sz); |
| memcpy(mem.config_page, &config_page, |
| sizeof(Mpi2IOUnitPage1_t)); |
| |
| ioc->base_add_sg_single(&mpi_request.PageBufferSGE, |
| MPT2_CONFIG_COMMON_WRITE_SGLFLAGS | mem.config_page_sz, |
| mem.config_page_dma); |
| r = _config_request(ioc, &mpi_request, mpi_reply, |
| MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); |
| |
| if (mem.config_page_sz > ioc->config_page_sz) |
| _config_free_config_dma_memory(ioc, &mem); |
| |
| out: |
| return r; |
| } |
| |
| /** |
| * mpt2sas_config_get_ioc_pg8 - obtain ioc page 8 |
| * @ioc: per adapter object |
| * @mpi_reply: reply mf payload returned from firmware |
| * @config_page: contents of the config page |
| * Context: sleep. |
| * |
| * Returns 0 for success, non-zero for failure. |
| */ |
| int |
| mpt2sas_config_get_ioc_pg8(struct MPT2SAS_ADAPTER *ioc, |
| Mpi2ConfigReply_t *mpi_reply, Mpi2IOCPage8_t *config_page) |
| { |
| Mpi2ConfigRequest_t mpi_request; |
| int r; |
| struct config_request mem; |
| |
| memset(config_page, 0, sizeof(Mpi2IOCPage8_t)); |
| memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); |
| mpi_request.Function = MPI2_FUNCTION_CONFIG; |
| mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; |
| mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_IOC; |
| mpi_request.Header.PageNumber = 8; |
| mpi_request.Header.PageVersion = MPI2_IOCPAGE8_PAGEVERSION; |
| mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE); |
| r = _config_request(ioc, &mpi_request, mpi_reply, |
| MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); |
| if (r) |
| goto out; |
| |
| mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; |
| mpi_request.Header.PageVersion = mpi_reply->Header.PageVersion; |
| mpi_request.Header.PageNumber = mpi_reply->Header.PageNumber; |
| mpi_request.Header.PageType = mpi_reply->Header.PageType; |
| mpi_request.Header.PageLength = mpi_reply->Header.PageLength; |
| mem.config_page_sz = le16_to_cpu(mpi_reply->Header.PageLength) * 4; |
| if (mem.config_page_sz > ioc->config_page_sz) { |
| r = _config_alloc_config_dma_memory(ioc, &mem); |
| if (r) |
| goto out; |
| } else { |
| mem.config_page_dma = ioc->config_page_dma; |
| mem.config_page = ioc->config_page; |
| } |
| ioc->base_add_sg_single(&mpi_request.PageBufferSGE, |
| MPT2_CONFIG_COMMON_SGLFLAGS | mem.config_page_sz, |
| mem.config_page_dma); |
| r = _config_request(ioc, &mpi_request, mpi_reply, |
| MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); |
| if (!r) |
| memcpy(config_page, mem.config_page, |
| min_t(u16, mem.config_page_sz, |
| sizeof(Mpi2IOCPage8_t))); |
| |
| if (mem.config_page_sz > ioc->config_page_sz) |
| _config_free_config_dma_memory(ioc, &mem); |
| |
| out: |
| return r; |
| } |
| |
| /** |
| * mpt2sas_config_get_sas_device_pg0 - obtain sas device page 0 |
| * @ioc: per adapter object |
| * @mpi_reply: reply mf payload returned from firmware |
| * @config_page: contents of the config page |
| * @form: GET_NEXT_HANDLE or HANDLE |
| * @handle: device handle |
| * Context: sleep. |
| * |
| * Returns 0 for success, non-zero for failure. |
| */ |
| int |
| mpt2sas_config_get_sas_device_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t |
| *mpi_reply, Mpi2SasDevicePage0_t *config_page, u32 form, u32 handle) |
| { |
| Mpi2ConfigRequest_t mpi_request; |
| int r; |
| struct config_request mem; |
| |
| memset(config_page, 0, sizeof(Mpi2SasDevicePage0_t)); |
| memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); |
| mpi_request.Function = MPI2_FUNCTION_CONFIG; |
| mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; |
| mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED; |
| mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_DEVICE; |
| mpi_request.Header.PageVersion = MPI2_SASDEVICE0_PAGEVERSION; |
| mpi_request.Header.PageNumber = 0; |
| mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE); |
| r = _config_request(ioc, &mpi_request, mpi_reply, |
| MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); |
| if (r) |
| goto out; |
| |
| mpi_request.PageAddress = cpu_to_le32(form | handle); |
| mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; |
| mpi_request.Header.PageVersion = mpi_reply->Header.PageVersion; |
| mpi_request.Header.PageNumber = mpi_reply->Header.PageNumber; |
| mpi_request.Header.PageType = mpi_reply->Header.PageType; |
| mpi_request.ExtPageLength = mpi_reply->ExtPageLength; |
| mpi_request.ExtPageType = mpi_reply->ExtPageType; |
| mem.config_page_sz = le16_to_cpu(mpi_reply->ExtPageLength) * 4; |
| if (mem.config_page_sz > ioc->config_page_sz) { |
| r = _config_alloc_config_dma_memory(ioc, &mem); |
| if (r) |
| goto out; |
| } else { |
| mem.config_page_dma = ioc->config_page_dma; |
| mem.config_page = ioc->config_page; |
| } |
| ioc->base_add_sg_single(&mpi_request.PageBufferSGE, |
| MPT2_CONFIG_COMMON_SGLFLAGS | mem.config_page_sz, |
| mem.config_page_dma); |
| r = _config_request(ioc, &mpi_request, mpi_reply, |
| MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); |
| if (!r) |
| memcpy(config_page, mem.config_page, |
| min_t(u16, mem.config_page_sz, |
| sizeof(Mpi2SasDevicePage0_t))); |
| |
| if (mem.config_page_sz > ioc->config_page_sz) |
| _config_free_config_dma_memory(ioc, &mem); |
| |
| out: |
| return r; |
| } |
| |
| /** |
| * mpt2sas_config_get_sas_device_pg1 - obtain sas device page 1 |
| * @ioc: per adapter object |
| * @mpi_reply: reply mf payload returned from firmware |
| * @config_page: contents of the config page |
| * @form: GET_NEXT_HANDLE or HANDLE |
| * @handle: device handle |
| * Context: sleep. |
| * |
| * Returns 0 for success, non-zero for failure. |
| */ |
| int |
| mpt2sas_config_get_sas_device_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t |
| *mpi_reply, Mpi2SasDevicePage1_t *config_page, u32 form, u32 handle) |
| { |
| Mpi2ConfigRequest_t mpi_request; |
| int r; |
| struct config_request mem; |
| |
| memset(config_page, 0, sizeof(Mpi2SasDevicePage1_t)); |
| memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); |
| mpi_request.Function = MPI2_FUNCTION_CONFIG; |
| mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; |
| mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED; |
| mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_DEVICE; |
| mpi_request.Header.PageVersion = MPI2_SASDEVICE1_PAGEVERSION; |
| mpi_request.Header.PageNumber = 1; |
| mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE); |
| r = _config_request(ioc, &mpi_request, mpi_reply, |
| MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); |
| if (r) |
| goto out; |
| |
| mpi_request.PageAddress = cpu_to_le32(form | handle); |
| mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; |
| mpi_request.Header.PageVersion = mpi_reply->Header.PageVersion; |
| mpi_request.Header.PageNumber = mpi_reply->Header.PageNumber; |
| mpi_request.Header.PageType = mpi_reply->Header.PageType; |
| mpi_request.ExtPageLength = mpi_reply->ExtPageLength; |
| mpi_request.ExtPageType = mpi_reply->ExtPageType; |
| mem.config_page_sz = le16_to_cpu(mpi_reply->ExtPageLength) * 4; |
| if (mem.config_page_sz > ioc->config_page_sz) { |
| r = _config_alloc_config_dma_memory(ioc, &mem); |
| if (r) |
| goto out; |
| } else { |
| mem.config_page_dma = ioc->config_page_dma; |
| mem.config_page = ioc->config_page; |
| } |
| ioc->base_add_sg_single(&mpi_request.PageBufferSGE, |
| MPT2_CONFIG_COMMON_SGLFLAGS | mem.config_page_sz, |
| mem.config_page_dma); |
| r = _config_request(ioc, &mpi_request, mpi_reply, |
| MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); |
| if (!r) |
| memcpy(config_page, mem.config_page, |
| min_t(u16, mem.config_page_sz, |
| sizeof(Mpi2SasDevicePage1_t))); |
| |
| if (mem.config_page_sz > ioc->config_page_sz) |
| _config_free_config_dma_memory(ioc, &mem); |
| |
| out: |
| return r; |
| } |
| |
| /** |
| * mpt2sas_config_get_number_hba_phys - obtain number of phys on the host |
| * @ioc: per adapter object |
| * @num_phys: pointer returned with the number of phys |
| * Context: sleep. |
| * |
| * Returns 0 for success, non-zero for failure. |
| */ |
| int |
| mpt2sas_config_get_number_hba_phys(struct MPT2SAS_ADAPTER *ioc, u8 *num_phys) |
| { |
| Mpi2ConfigRequest_t mpi_request; |
| int r; |
| struct config_request mem; |
| u16 ioc_status; |
| Mpi2ConfigReply_t mpi_reply; |
| Mpi2SasIOUnitPage0_t config_page; |
| |
| memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); |
| mpi_request.Function = MPI2_FUNCTION_CONFIG; |
| mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; |
| mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED; |
| mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_IO_UNIT; |
| mpi_request.Header.PageNumber = 0; |
| mpi_request.Header.PageVersion = MPI2_SASIOUNITPAGE0_PAGEVERSION; |
| mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE); |
| r = _config_request(ioc, &mpi_request, &mpi_reply, |
| MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); |
| if (r) |
| goto out; |
| |
| mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; |
| mpi_request.Header.PageVersion = mpi_reply.Header.PageVersion; |
| mpi_request.Header.PageNumber = mpi_reply.Header.PageNumber; |
| mpi_request.Header.PageType = mpi_reply.Header.PageType; |
| mpi_request.ExtPageLength = mpi_reply.ExtPageLength; |
| mpi_request.ExtPageType = mpi_reply.ExtPageType; |
| mem.config_page_sz = le16_to_cpu(mpi_reply.ExtPageLength) * 4; |
| if (mem.config_page_sz > ioc->config_page_sz) { |
| r = _config_alloc_config_dma_memory(ioc, &mem); |
| if (r) |
| goto out; |
| } else { |
| mem.config_page_dma = ioc->config_page_dma; |
| mem.config_page = ioc->config_page; |
| } |
| ioc->base_add_sg_single(&mpi_request.PageBufferSGE, |
| MPT2_CONFIG_COMMON_SGLFLAGS | mem.config_page_sz, |
| mem.config_page_dma); |
| r = _config_request(ioc, &mpi_request, &mpi_reply, |
| MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); |
| if (!r) { |
| ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & |
| MPI2_IOCSTATUS_MASK; |
| if (ioc_status == MPI2_IOCSTATUS_SUCCESS) { |
| memcpy(&config_page, mem.config_page, |
| min_t(u16, mem.config_page_sz, |
| sizeof(Mpi2SasIOUnitPage0_t))); |
| *num_phys = config_page.NumPhys; |
| } |
| } |
| |
| if (mem.config_page_sz > ioc->config_page_sz) |
| _config_free_config_dma_memory(ioc, &mem); |
| |
| out: |
| return r; |
| } |
| |
| /** |
| * mpt2sas_config_get_sas_iounit_pg0 - obtain sas iounit page 0 |
| * @ioc: per adapter object |
| * @mpi_reply: reply mf payload returned from firmware |
| * @config_page: contents of the config page |
| * @sz: size of buffer passed in config_page |
| * Context: sleep. |
| * |
| * Calling function should call config_get_number_hba_phys prior to |
| * this function, so enough memory is allocated for config_page. |
| * |
| * Returns 0 for success, non-zero for failure. |
| */ |
| int |
| mpt2sas_config_get_sas_iounit_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t |
| *mpi_reply, Mpi2SasIOUnitPage0_t *config_page, u16 sz) |
| { |
| Mpi2ConfigRequest_t mpi_request; |
| int r; |
| struct config_request mem; |
| memset(config_page, 0, sz); |
| memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); |
| mpi_request.Function = MPI2_FUNCTION_CONFIG; |
| mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; |
| mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED; |
| mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_IO_UNIT; |
| mpi_request.Header.PageNumber = 0; |
| mpi_request.Header.PageVersion = MPI2_SASIOUNITPAGE0_PAGEVERSION; |
| mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE); |
| r = _config_request(ioc, &mpi_request, mpi_reply, |
| MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); |
| if (r) |
| goto out; |
| |
| mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; |
| mpi_request.Header.PageVersion = mpi_reply->Header.PageVersion; |
| mpi_request.Header.PageNumber = mpi_reply->Header.PageNumber; |
| mpi_request.Header.PageType = mpi_reply->Header.PageType; |
| mpi_request.ExtPageLength = mpi_reply->ExtPageLength; |
| mpi_request.ExtPageType = mpi_reply->ExtPageType; |
| mem.config_page_sz = le16_to_cpu(mpi_reply->ExtPageLength) * 4; |
| if (mem.config_page_sz > ioc->config_page_sz) { |
| r = _config_alloc_config_dma_memory(ioc, &mem); |
| if (r) |
| goto out; |
| } else { |
| mem.config_page_dma = ioc->config_page_dma; |
| mem.config_page = ioc->config_page; |
| } |
| ioc->base_add_sg_single(&mpi_request.PageBufferSGE, |
| MPT2_CONFIG_COMMON_SGLFLAGS | mem.config_page_sz, |
| mem.config_page_dma); |
| r = _config_request(ioc, &mpi_request, mpi_reply, |
| MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); |
| if (!r) |
| memcpy(config_page, mem.config_page, |
| min_t(u16, sz, mem.config_page_sz)); |
| |
| if (mem.config_page_sz > ioc->config_page_sz) |
| _config_free_config_dma_memory(ioc, &mem); |
| |
| out: |
| return r; |
| } |
| |
| /** |
| * mpt2sas_config_get_sas_iounit_pg1 - obtain sas iounit page 0 |
| * @ioc: per adapter object |
| * @mpi_reply: reply mf payload returned from firmware |
| * @config_page: contents of the config page |
| * @sz: size of buffer passed in config_page |
| * Context: sleep. |
| * |
| * Calling function should call config_get_number_hba_phys prior to |
| * this function, so enough memory is allocated for config_page. |
| * |
| * Returns 0 for success, non-zero for failure. |
| */ |
| int |
| mpt2sas_config_get_sas_iounit_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t |
| *mpi_reply, Mpi2SasIOUnitPage1_t *config_page, u16 sz) |
| { |
| Mpi2ConfigRequest_t mpi_request; |
| int r; |
| struct config_request mem; |
| |
| memset(config_page, 0, sz); |
| memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); |
| mpi_request.Function = MPI2_FUNCTION_CONFIG; |
| mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; |
| mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED; |
| mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_IO_UNIT; |
| mpi_request.Header.PageNumber = 1; |
| mpi_request.Header.PageVersion = MPI2_SASIOUNITPAGE0_PAGEVERSION; |
| mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE); |
| r = _config_request(ioc, &mpi_request, mpi_reply, |
| MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); |
| if (r) |
| goto out; |
| |
| mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; |
| mpi_request.Header.PageVersion = mpi_reply->Header.PageVersion; |
| mpi_request.Header.PageNumber = mpi_reply->Header.PageNumber; |
| mpi_request.Header.PageType = mpi_reply->Header.PageType; |
| mpi_request.ExtPageLength = mpi_reply->ExtPageLength; |
| mpi_request.ExtPageType = mpi_reply->ExtPageType; |
| mem.config_page_sz = le16_to_cpu(mpi_reply->ExtPageLength) * 4; |
| if (mem.config_page_sz > ioc->config_page_sz) { |
| r = _config_alloc_config_dma_memory(ioc, &mem); |
| if (r) |
| goto out; |
| } else { |
| mem.config_page_dma = ioc->config_page_dma; |
| mem.config_page = ioc->config_page; |
| } |
| ioc->base_add_sg_single(&mpi_request.PageBufferSGE, |
| MPT2_CONFIG_COMMON_SGLFLAGS | mem.config_page_sz, |
| mem.config_page_dma); |
| r = _config_request(ioc, &mpi_request, mpi_reply, |
| MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); |
| if (!r) |
| memcpy(config_page, mem.config_page, |
| min_t(u16, sz, mem.config_page_sz)); |
| |
| if (mem.config_page_sz > ioc->config_page_sz) |
| _config_free_config_dma_memory(ioc, &mem); |
| |
| out: |
| return r; |
| } |
| |
| /** |
| * mpt2sas_config_get_expander_pg0 - obtain expander page 0 |
| * @ioc: per adapter object |
| * @mpi_reply: reply mf payload returned from firmware |
| * @config_page: contents of the config page |
| * @form: GET_NEXT_HANDLE or HANDLE |
| * @handle: expander handle |
| * Context: sleep. |
| * |
| * Returns 0 for success, non-zero for failure. |
| */ |
| int |
| mpt2sas_config_get_expander_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t |
| *mpi_reply, Mpi2ExpanderPage0_t *config_page, u32 form, u32 handle) |
| { |
| Mpi2ConfigRequest_t mpi_request; |
| int r; |
| struct config_request mem; |
| |
| memset(config_page, 0, sizeof(Mpi2ExpanderPage0_t)); |
| memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); |
| mpi_request.Function = MPI2_FUNCTION_CONFIG; |
| mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; |
| mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED; |
| mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_EXPANDER; |
| mpi_request.Header.PageNumber = 0; |
| mpi_request.Header.PageVersion = MPI2_SASEXPANDER0_PAGEVERSION; |
| mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE); |
| r = _config_request(ioc, &mpi_request, mpi_reply, |
| MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); |
| if (r) |
| goto out; |
| |
| mpi_request.PageAddress = cpu_to_le32(form | handle); |
| mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; |
| mpi_request.Header.PageVersion = mpi_reply->Header.PageVersion; |
| mpi_request.Header.PageNumber = mpi_reply->Header.PageNumber; |
| mpi_request.Header.PageType = mpi_reply->Header.PageType; |
| mpi_request.ExtPageLength = mpi_reply->ExtPageLength; |
| mpi_request.ExtPageType = mpi_reply->ExtPageType; |
| mem.config_page_sz = le16_to_cpu(mpi_reply->ExtPageLength) * 4; |
| if (mem.config_page_sz > ioc->config_page_sz) { |
| r = _config_alloc_config_dma_memory(ioc, &mem); |
| if (r) |
| goto out; |
| } else { |
| mem.config_page_dma = ioc->config_page_dma; |
| mem.config_page = ioc->config_page; |
| } |
| ioc->base_add_sg_single(&mpi_request.PageBufferSGE, |
| MPT2_CONFIG_COMMON_SGLFLAGS | mem.config_page_sz, |
| mem.config_page_dma); |
| r = _config_request(ioc, &mpi_request, mpi_reply, |
| MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); |
| if (!r) |
| memcpy(config_page, mem.config_page, |
| min_t(u16, mem.config_page_sz, |
| sizeof(Mpi2ExpanderPage0_t))); |
| |
| if (mem.config_page_sz > ioc->config_page_sz) |
| _config_free_config_dma_memory(ioc, &mem); |
| |
| out: |
| return r; |
| } |
| |
| /** |
| * mpt2sas_config_get_expander_pg1 - obtain expander page 1 |
| * @ioc: per adapter object |
| * @mpi_reply: reply mf payload returned from firmware |
| * @config_page: contents of the config page |
| * @phy_number: phy number |
| * @handle: expander handle |
| * Context: sleep. |
| * |
| * Returns 0 for success, non-zero for failure. |
| */ |
| int |
| mpt2sas_config_get_expander_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t |
| *mpi_reply, Mpi2ExpanderPage1_t *config_page, u32 phy_number, |
| u16 handle) |
| { |
| Mpi2ConfigRequest_t mpi_request; |
| int r; |
| struct config_request mem; |
| |
| memset(config_page, 0, sizeof(Mpi2ExpanderPage1_t)); |
| memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); |
| mpi_request.Function = MPI2_FUNCTION_CONFIG; |
| mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; |
| mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED; |
| mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_EXPANDER; |
| mpi_request.Header.PageNumber = 1; |
| mpi_request.Header.PageVersion = MPI2_SASEXPANDER1_PAGEVERSION; |
| mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE); |
| r = _config_request(ioc, &mpi_request, mpi_reply, |
| MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); |
| if (r) |
| goto out; |
| |
| mpi_request.PageAddress = |
| cpu_to_le32(MPI2_SAS_EXPAND_PGAD_FORM_HNDL_PHY_NUM | |
| (phy_number << MPI2_SAS_EXPAND_PGAD_PHYNUM_SHIFT) | handle); |
| mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; |
| mpi_request.Header.PageVersion = mpi_reply->Header.PageVersion; |
| mpi_request.Header.PageNumber = mpi_reply->Header.PageNumber; |
| mpi_request.Header.PageType = mpi_reply->Header.PageType; |
| mpi_request.ExtPageLength = mpi_reply->ExtPageLength; |
| mpi_request.ExtPageType = mpi_reply->ExtPageType; |
| mem.config_page_sz = le16_to_cpu(mpi_reply->ExtPageLength) * 4; |
| if (mem.config_page_sz > ioc->config_page_sz) { |
| r = _config_alloc_config_dma_memory(ioc, &mem); |
| if (r) |
| goto out; |
| } else { |
| mem.config_page_dma = ioc->config_page_dma; |
| mem.config_page = ioc->config_page; |
| } |
| ioc->base_add_sg_single(&mpi_request.PageBufferSGE, |
| MPT2_CONFIG_COMMON_SGLFLAGS | mem.config_page_sz, |
| mem.config_page_dma); |
| r = _config_request(ioc, &mpi_request, mpi_reply, |
| MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); |
| if (!r) |
| memcpy(config_page, mem.config_page, |
| min_t(u16, mem.config_page_sz, |
| sizeof(Mpi2ExpanderPage1_t))); |
| |
| if (mem.config_page_sz > ioc->config_page_sz) |
| _config_free_config_dma_memory(ioc, &mem); |
| |
| out: |
| return r; |
| } |
| |
| /** |
| * mpt2sas_config_get_enclosure_pg0 - obtain enclosure page 0 |
| * @ioc: per adapter object |
| * @mpi_reply: reply mf payload returned from firmware |
| * @config_page: contents of the config page |
| * @form: GET_NEXT_HANDLE or HANDLE |
| * @handle: expander handle |
| * Context: sleep. |
| * |
| * Returns 0 for success, non-zero for failure. |
| */ |
| int |
| mpt2sas_config_get_enclosure_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t |
| *mpi_reply, Mpi2SasEnclosurePage0_t *config_page, u32 form, u32 handle) |
| { |
| Mpi2ConfigRequest_t mpi_request; |
| int r; |
| struct config_request mem; |
| |
| memset(config_page, 0, sizeof(Mpi2SasEnclosurePage0_t)); |
| memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); |
| mpi_request.Function = MPI2_FUNCTION_CONFIG; |
| mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; |
| mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED; |
| mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_ENCLOSURE; |
| mpi_request.Header.PageNumber = 0; |
| mpi_request.Header.PageVersion = MPI2_SASENCLOSURE0_PAGEVERSION; |
| mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE); |
| r = _config_request(ioc, &mpi_request, mpi_reply, |
| MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); |
| if (r) |
| goto out; |
| |
| mpi_request.PageAddress = cpu_to_le32(form | handle); |
| mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; |
| mpi_request.Header.PageVersion = mpi_reply->Header.PageVersion; |
| mpi_request.Header.PageNumber = mpi_reply->Header.PageNumber; |
| mpi_request.Header.PageType = mpi_reply->Header.PageType; |
| mpi_request.ExtPageLength = mpi_reply->ExtPageLength; |
| mpi_request.ExtPageType = mpi_reply->ExtPageType; |
| mem.config_page_sz = le16_to_cpu(mpi_reply->ExtPageLength) * 4; |
| if (mem.config_page_sz > ioc->config_page_sz) { |
| r = _config_alloc_config_dma_memory(ioc, &mem); |
| if (r) |
| goto out; |
| } else { |
| mem.config_page_dma = ioc->config_page_dma; |
| mem.config_page = ioc->config_page; |
| } |
| ioc->base_add_sg_single(&mpi_request.PageBufferSGE, |
| MPT2_CONFIG_COMMON_SGLFLAGS | mem.config_page_sz, |
| mem.config_page_dma); |
| r = _config_request(ioc, &mpi_request, mpi_reply, |
| MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); |
| if (!r) |
| memcpy(config_page, mem.config_page, |
| min_t(u16, mem.config_page_sz, |
| sizeof(Mpi2SasEnclosurePage0_t))); |
| |
| if (mem.config_page_sz > ioc->config_page_sz) |
| _config_free_config_dma_memory(ioc, &mem); |
| |
| out: |
| return r; |
| } |
| |
| /** |
| * mpt2sas_config_get_phy_pg0 - obtain phy page 0 |
| * @ioc: per adapter object |
| * @mpi_reply: reply mf payload returned from firmware |
| * @config_page: contents of the config page |
| * @phy_number: phy number |
| * Context: sleep. |
| * |
| * Returns 0 for success, non-zero for failure. |
| */ |
| int |
| mpt2sas_config_get_phy_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t |
| *mpi_reply, Mpi2SasPhyPage0_t *config_page, u32 phy_number) |
| { |
| Mpi2ConfigRequest_t mpi_request; |
| int r; |
| struct config_request mem; |
| |
| memset(config_page, 0, sizeof(Mpi2SasPhyPage0_t)); |
| memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); |
| mpi_request.Function = MPI2_FUNCTION_CONFIG; |
| mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; |
| mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED; |
| mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_PHY; |
| mpi_request.Header.PageNumber = 0; |
| mpi_request.Header.PageVersion = MPI2_SASPHY0_PAGEVERSION; |
| mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE); |
| r = _config_request(ioc, &mpi_request, mpi_reply, |
| MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); |
| if (r) |
| goto out; |
| |
| mpi_request.PageAddress = |
| cpu_to_le32(MPI2_SAS_PHY_PGAD_FORM_PHY_NUMBER | phy_number); |
| mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; |
| mpi_request.Header.PageVersion = mpi_reply->Header.PageVersion; |
| mpi_request.Header.PageNumber = mpi_reply->Header.PageNumber; |
| mpi_request.Header.PageType = mpi_reply->Header.PageType; |
| mpi_request.ExtPageLength = mpi_reply->ExtPageLength; |
| mpi_request.ExtPageType = mpi_reply->ExtPageType; |
| mem.config_page_sz = le16_to_cpu(mpi_reply->ExtPageLength) * 4; |
| if (mem.config_page_sz > ioc->config_page_sz) { |
| r = _config_alloc_config_dma_memory(ioc, &mem); |
| if (r) |
| goto out; |
| } else { |
| mem.config_page_dma = ioc->config_page_dma; |
| mem.config_page = ioc->config_page; |
| } |
| ioc->base_add_sg_single(&mpi_request.PageBufferSGE, |
| MPT2_CONFIG_COMMON_SGLFLAGS | mem.config_page_sz, |
| mem.config_page_dma); |
| r = _config_request(ioc, &mpi_request, mpi_reply, |
| MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); |
| if (!r) |
| memcpy(config_page, mem.config_page, |
| min_t(u16, mem.config_page_sz, |
| sizeof(Mpi2SasPhyPage0_t))); |
| |
| if (mem.config_page_sz > ioc->config_page_sz) |
| _config_free_config_dma_memory(ioc, &mem); |
| |
| out: |
| return r; |
| } |
| |
| /** |
| * mpt2sas_config_get_phy_pg1 - obtain phy page 1 |
| * @ioc: per adapter object |
| * @mpi_reply: reply mf payload returned from firmware |
| * @config_page: contents of the config page |
| * @phy_number: phy number |
| * Context: sleep. |
| * |
| * Returns 0 for success, non-zero for failure. |
| */ |
| int |
| mpt2sas_config_get_phy_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t |
| *mpi_reply, Mpi2SasPhyPage1_t *config_page, u32 phy_number) |
| { |
| Mpi2ConfigRequest_t mpi_request; |
| int r; |
| struct config_request mem; |
| |
| memset(config_page, 0, sizeof(Mpi2SasPhyPage1_t)); |
| memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); |
| mpi_request.Function = MPI2_FUNCTION_CONFIG; |
| mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; |
| mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED; |
| mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_PHY; |
| mpi_request.Header.PageNumber = 1; |
| mpi_request.Header.PageVersion = MPI2_SASPHY1_PAGEVERSION; |
| mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE); |
| r = _config_request(ioc, &mpi_request, mpi_reply, |
| MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); |
| if (r) |
| goto out; |
| |
| mpi_request.PageAddress = |
| cpu_to_le32(MPI2_SAS_PHY_PGAD_FORM_PHY_NUMBER | phy_number); |
| mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; |
| mpi_request.Header.PageVersion = mpi_reply->Header.PageVersion; |
| mpi_request.Header.PageNumber = mpi_reply->Header.PageNumber; |
| mpi_request.Header.PageType = mpi_reply->Header.PageType; |
| mpi_request.ExtPageLength = mpi_reply->ExtPageLength; |
| mpi_request.ExtPageType = mpi_reply->ExtPageType; |
| mem.config_page_sz = le16_to_cpu(mpi_reply->ExtPageLength) * 4; |
| if (mem.config_page_sz > ioc->config_page_sz) { |
| r = _config_alloc_config_dma_memory(ioc, &mem); |
| if (r) |
| goto out; |
| } else { |
| mem.config_page_dma = ioc->config_page_dma; |
| mem.config_page = ioc->config_page; |
| } |
| ioc->base_add_sg_single(&mpi_request.PageBufferSGE, |
| MPT2_CONFIG_COMMON_SGLFLAGS | mem.config_page_sz, |
| mem.config_page_dma); |
| r = _config_request(ioc, &mpi_request, mpi_reply, |
| MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); |
| if (!r) |
| memcpy(config_page, mem.config_page, |
| min_t(u16, mem.config_page_sz, |
| sizeof(Mpi2SasPhyPage1_t))); |
| |
| if (mem.config_page_sz > ioc->config_page_sz) |
| _config_free_config_dma_memory(ioc, &mem); |
| |
| out: |
| return r; |
| } |
| |
| /** |
| * mpt2sas_config_get_raid_volume_pg1 - obtain raid volume page 1 |
| * @ioc: per adapter object |
| * @mpi_reply: reply mf payload returned from firmware |
| * @config_page: contents of the config page |
| * @form: GET_NEXT_HANDLE or HANDLE |
| * @handle: volume handle |
| * Context: sleep. |
| * |
| * Returns 0 for success, non-zero for failure. |
| */ |
| int |
| mpt2sas_config_get_raid_volume_pg1(struct MPT2SAS_ADAPTER *ioc, |
| Mpi2ConfigReply_t *mpi_reply, Mpi2RaidVolPage1_t *config_page, u32 form, |
| u32 handle) |
| { |
| Mpi2ConfigRequest_t mpi_request; |
| int r; |
| struct config_request mem; |
| |
| memset(config_page, 0, sizeof(Mpi2RaidVolPage1_t)); |
| memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); |
| mpi_request.Function = MPI2_FUNCTION_CONFIG; |
| mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; |
| mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_RAID_VOLUME; |
| mpi_request.Header.PageNumber = 1; |
| mpi_request.Header.PageVersion = MPI2_RAIDVOLPAGE1_PAGEVERSION; |
| mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE); |
| r = _config_request(ioc, &mpi_request, mpi_reply, |
| MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); |
| if (r) |
| goto out; |
| |
| mpi_request.PageAddress = cpu_to_le32(form | handle); |
| mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; |
| mpi_request.Header.PageVersion = mpi_reply->Header.PageVersion; |
| mpi_request.Header.PageNumber = mpi_reply->Header.PageNumber; |
| mpi_request.Header.PageType = mpi_reply->Header.PageType; |
| mpi_request.Header.PageLength = mpi_reply->Header.PageLength; |
| mem.config_page_sz = le16_to_cpu(mpi_reply->Header.PageLength) * 4; |
| if (mem.config_page_sz > ioc->config_page_sz) { |
| r = _config_alloc_config_dma_memory(ioc, &mem); |
| if (r) |
| goto out; |
| } else { |
| mem.config_page_dma = ioc->config_page_dma; |
| mem.config_page = ioc->config_page; |
| } |
| ioc->base_add_sg_single(&mpi_request.PageBufferSGE, |
| MPT2_CONFIG_COMMON_SGLFLAGS | mem.config_page_sz, |
| mem.config_page_dma); |
| r = _config_request(ioc, &mpi_request, mpi_reply, |
| MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); |
| if (!r) |
| memcpy(config_page, mem.config_page, |
| min_t(u16, mem.config_page_sz, |
| sizeof(Mpi2RaidVolPage1_t))); |
| |
| if (mem.config_page_sz > ioc->config_page_sz) |
| _config_free_config_dma_memory(ioc, &mem); |
| |
| out: |
| return r; |
| } |
| |
| /** |
| * mpt2sas_config_get_number_pds - obtain number of phys disk assigned to volume |
| * @ioc: per adapter object |
| * @handle: volume handle |
| * @num_pds: returns pds count |
| * Context: sleep. |
| * |
| * Returns 0 for success, non-zero for failure. |
| */ |
| int |
| mpt2sas_config_get_number_pds(struct MPT2SAS_ADAPTER *ioc, u16 handle, |
| u8 *num_pds) |
| { |
| Mpi2ConfigRequest_t mpi_request; |
| Mpi2RaidVolPage0_t *config_page; |
| Mpi2ConfigReply_t mpi_reply; |
| int r; |
| struct config_request mem; |
| u16 ioc_status; |
| |
| memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); |
| *num_pds = 0; |
| mpi_request.Function = MPI2_FUNCTION_CONFIG; |
| mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; |
| mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_RAID_VOLUME; |
| mpi_request.Header.PageNumber = 0; |
| mpi_request.Header.PageVersion = MPI2_RAIDVOLPAGE0_PAGEVERSION; |
| mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE); |
| r = _config_request(ioc, &mpi_request, &mpi_reply, |
| MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); |
| if (r) |
| goto out; |
| |
| mpi_request.PageAddress = |
| cpu_to_le32(MPI2_RAID_VOLUME_PGAD_FORM_HANDLE | handle); |
| mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; |
| mpi_request.Header.PageVersion = mpi_reply.Header.PageVersion; |
| mpi_request.Header.PageNumber = mpi_reply.Header.PageNumber; |
| mpi_request.Header.PageType = mpi_reply.Header.PageType; |
| mpi_request.Header.PageLength = mpi_reply.Header.PageLength; |
| mem.config_page_sz = le16_to_cpu(mpi_reply.Header.PageLength) * 4; |
| if (mem.config_page_sz > ioc->config_page_sz) { |
| r = _config_alloc_config_dma_memory(ioc, &mem); |
| if (r) |
| goto out; |
| } else { |
| mem.config_page_dma = ioc->config_page_dma; |
| mem.config_page = ioc->config_page; |
| } |
| ioc->base_add_sg_single(&mpi_request.PageBufferSGE, |
| MPT2_CONFIG_COMMON_SGLFLAGS | mem.config_page_sz, |
| mem.config_page_dma); |
| r = _config_request(ioc, &mpi_request, &mpi_reply, |
| MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); |
| if (!r) { |
| ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & |
| MPI2_IOCSTATUS_MASK; |
| if (ioc_status == MPI2_IOCSTATUS_SUCCESS) { |
| config_page = mem.config_page; |
| *num_pds = config_page->NumPhysDisks; |
| } |
| } |
| |
| if (mem.config_page_sz > ioc->config_page_sz) |
| _config_free_config_dma_memory(ioc, &mem); |
| |
| out: |
| return r; |
| } |
| |
| /** |
| * mpt2sas_config_get_raid_volume_pg0 - obtain raid volume page 0 |
| * @ioc: per adapter object |
| * @mpi_reply: reply mf payload returned from firmware |
| * @config_page: contents of the config page |
| * @form: GET_NEXT_HANDLE or HANDLE |
| * @handle: volume handle |
| * @sz: size of buffer passed in config_page |
| * Context: sleep. |
| * |
| * Returns 0 for success, non-zero for failure. |
| */ |
| int |
| mpt2sas_config_get_raid_volume_pg0(struct MPT2SAS_ADAPTER *ioc, |
| Mpi2ConfigReply_t *mpi_reply, Mpi2RaidVolPage0_t *config_page, u32 form, |
| u32 handle, u16 sz) |
| { |
| Mpi2ConfigRequest_t mpi_request; |
| int r; |
| struct config_request mem; |
| |
| memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); |
| memset(config_page, 0, sz); |
| mpi_request.Function = MPI2_FUNCTION_CONFIG; |
| mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; |
| mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_RAID_VOLUME; |
| mpi_request.Header.PageNumber = 0; |
| mpi_request.Header.PageVersion = MPI2_RAIDVOLPAGE0_PAGEVERSION; |
| mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE); |
| r = _config_request(ioc, &mpi_request, mpi_reply, |
| MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); |
| if (r) |
| goto out; |
| |
| mpi_request.PageAddress = cpu_to_le32(form | handle); |
| mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; |
| mpi_request.Header.PageVersion = mpi_reply->Header.PageVersion; |
| mpi_request.Header.PageNumber = mpi_reply->Header.PageNumber; |
| mpi_request.Header.PageType = mpi_reply->Header.PageType; |
| mpi_request.Header.PageLength = mpi_reply->Header.PageLength; |
| mem.config_page_sz = le16_to_cpu(mpi_reply->Header.PageLength) * 4; |
| if (mem.config_page_sz > ioc->config_page_sz) { |
| r = _config_alloc_config_dma_memory(ioc, &mem); |
| if (r) |
| goto out; |
| } else { |
| mem.config_page_dma = ioc->config_page_dma; |
| mem.config_page = ioc->config_page; |
| } |
| ioc->base_add_sg_single(&mpi_request.PageBufferSGE, |
| MPT2_CONFIG_COMMON_SGLFLAGS | mem.config_page_sz, |
| mem.config_page_dma); |
| r = _config_request(ioc, &mpi_request, mpi_reply, |
| MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); |
| if (!r) |
| memcpy(config_page, mem.config_page, |
| min_t(u16, sz, mem.config_page_sz)); |
| |
| if (mem.config_page_sz > ioc->config_page_sz) |
| _config_free_config_dma_memory(ioc, &mem); |
| |
| out: |
| return r; |
| } |
| |
| /** |
| * mpt2sas_config_get_phys_disk_pg0 - obtain phys disk page 0 |
| * @ioc: per adapter object |
| * @mpi_reply: reply mf payload returned from firmware |
| * @config_page: contents of the config page |
| * @form: GET_NEXT_PHYSDISKNUM, PHYSDISKNUM, DEVHANDLE |
| * @form_specific: specific to the form |
| * Context: sleep. |
| * |
| * Returns 0 for success, non-zero for failure. |
| */ |
| int |
| mpt2sas_config_get_phys_disk_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t |
| *mpi_reply, Mpi2RaidPhysDiskPage0_t *config_page, u32 form, |
| u32 form_specific) |
| { |
| Mpi2ConfigRequest_t mpi_request; |
| int r; |
| struct config_request mem; |
| |
| memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); |
| memset(config_page, 0, sizeof(Mpi2RaidPhysDiskPage0_t)); |
| mpi_request.Function = MPI2_FUNCTION_CONFIG; |
| mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; |
| mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_RAID_PHYSDISK; |
| mpi_request.Header.PageNumber = 0; |
| mpi_request.Header.PageVersion = MPI2_RAIDPHYSDISKPAGE0_PAGEVERSION; |
| mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE); |
| r = _config_request(ioc, &mpi_request, mpi_reply, |
| MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); |
| if (r) |
| goto out; |
| |
| mpi_request.PageAddress = cpu_to_le32(form | form_specific); |
| mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; |
| mpi_request.Header.PageVersion = mpi_reply->Header.PageVersion; |
| mpi_request.Header.PageNumber = mpi_reply->Header.PageNumber; |
| mpi_request.Header.PageType = mpi_reply->Header.PageType; |
| mpi_request.Header.PageLength = mpi_reply->Header.PageLength; |
| mem.config_page_sz = le16_to_cpu(mpi_reply->Header.PageLength) * 4; |
| if (mem.config_page_sz > ioc->config_page_sz) { |
| r = _config_alloc_config_dma_memory(ioc, &mem); |
| if (r) |
| goto out; |
| } else { |
| mem.config_page_dma = ioc->config_page_dma; |
| mem.config_page = ioc->config_page; |
| } |
| ioc->base_add_sg_single(&mpi_request.PageBufferSGE, |
| MPT2_CONFIG_COMMON_SGLFLAGS | mem.config_page_sz, |
| mem.config_page_dma); |
| r = _config_request(ioc, &mpi_request, mpi_reply, |
| MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); |
| if (!r) |
| memcpy(config_page, mem.config_page, |
| min_t(u16, mem.config_page_sz, |
| sizeof(Mpi2RaidPhysDiskPage0_t))); |
| |
| if (mem.config_page_sz > ioc->config_page_sz) |
| _config_free_config_dma_memory(ioc, &mem); |
| |
| out: |
| return r; |
| } |
| |
| /** |
| * mpt2sas_config_get_volume_handle - returns volume handle for give hidden raid components |
| * @ioc: per adapter object |
| * @pd_handle: phys disk handle |
| * @volume_handle: volume handle |
| * Context: sleep. |
| * |
| * Returns 0 for success, non-zero for failure. |
| */ |
| int |
| mpt2sas_config_get_volume_handle(struct MPT2SAS_ADAPTER *ioc, u16 pd_handle, |
| u16 *volume_handle) |
| { |
| Mpi2RaidConfigurationPage0_t *config_page; |
| Mpi2ConfigRequest_t mpi_request; |
| Mpi2ConfigReply_t mpi_reply; |
| int r, i; |
| struct config_request mem; |
| u16 ioc_status; |
| |
| *volume_handle = 0; |
| memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); |
| mpi_request.Function = MPI2_FUNCTION_CONFIG; |
| mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; |
| mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED; |
| mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_RAID_CONFIG; |
| mpi_request.Header.PageVersion = MPI2_RAIDCONFIG0_PAGEVERSION; |
| mpi_request.Header.PageNumber = 0; |
| mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE); |
| r = _config_request(ioc, &mpi_request, &mpi_reply, |
| MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); |
| if (r) |
| goto out; |
| |
| mpi_request.PageAddress = |
| cpu_to_le32(MPI2_RAID_PGAD_FORM_ACTIVE_CONFIG); |
| mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; |
| mpi_request.Header.PageVersion = mpi_reply.Header.PageVersion; |
| mpi_request.Header.PageNumber = mpi_reply.Header.PageNumber; |
| mpi_request.Header.PageType = mpi_reply.Header.PageType; |
| mpi_request.ExtPageLength = mpi_reply.ExtPageLength; |
| mpi_request.ExtPageType = mpi_reply.ExtPageType; |
| mem.config_page_sz = le16_to_cpu(mpi_reply.ExtPageLength) * 4; |
| if (mem.config_page_sz > ioc->config_page_sz) { |
| r = _config_alloc_config_dma_memory(ioc, &mem); |
| if (r) |
| goto out; |
| } else { |
| mem.config_page_dma = ioc->config_page_dma; |
| mem.config_page = ioc->config_page; |
| } |
| ioc->base_add_sg_single(&mpi_request.PageBufferSGE, |
| MPT2_CONFIG_COMMON_SGLFLAGS | mem.config_page_sz, |
| mem.config_page_dma); |
| r = _config_request(ioc, &mpi_request, &mpi_reply, |
| MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); |
| if (r) |
| goto out; |
| |
| r = -1; |
| ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK; |
| if (ioc_status != MPI2_IOCSTATUS_SUCCESS) |
| goto done; |
| config_page = mem.config_page; |
| for (i = 0; i < config_page->NumElements; i++) { |
| if ((config_page->ConfigElement[i].ElementFlags & |
| MPI2_RAIDCONFIG0_EFLAGS_MASK_ELEMENT_TYPE) != |
| MPI2_RAIDCONFIG0_EFLAGS_VOL_PHYS_DISK_ELEMENT) |
| continue; |
| if (config_page->ConfigElement[i].PhysDiskDevHandle == |
| pd_handle) { |
| *volume_handle = le16_to_cpu(config_page-> |
| ConfigElement[i].VolDevHandle); |
| r = 0; |
| goto done; |
| } |
| } |
| |
| done: |
| if (mem.config_page_sz > ioc->config_page_sz) |
| _config_free_config_dma_memory(ioc, &mem); |
| |
| out: |
| return r; |
| } |
| |
| /** |
| * mpt2sas_config_get_volume_wwid - returns wwid given the volume handle |
| * @ioc: per adapter object |
| * @volume_handle: volume handle |
| * @wwid: volume wwid |
| * Context: sleep. |
| * |
| * Returns 0 for success, non-zero for failure. |
| */ |
| int |
| mpt2sas_config_get_volume_wwid(struct MPT2SAS_ADAPTER *ioc, u16 volume_handle, |
| u64 *wwid) |
| { |
| Mpi2ConfigReply_t mpi_reply; |
| Mpi2RaidVolPage1_t raid_vol_pg1; |
| |
| *wwid = 0; |
| if (!(mpt2sas_config_get_raid_volume_pg1(ioc, &mpi_reply, |
| &raid_vol_pg1, MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, |
| volume_handle))) { |
| *wwid = le64_to_cpu(raid_vol_pg1.WWID); |
| return 0; |
| } else |
| return -1; |
| } |