ad525x_dpot: add support for one time programmable pots
New parts supported:
AD5170, AD5171, AD5172, AD5173, AD5273
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
diff --git a/drivers/misc/ad525x_dpot.h b/drivers/misc/ad525x_dpot.h
index d789a95..78b89fd 100644
--- a/drivers/misc/ad525x_dpot.h
+++ b/drivers/misc/ad525x_dpot.h
@@ -15,17 +15,18 @@
(((features) << 18) | (((wipers) & 0xFF) << 10) | \
((max_pos & 0xF) << 6) | (uid & 0x3F))
-#define DPOT_UID(conf) (conf & 0x3F)
-#define DPOT_MAX_POS(conf) ((conf >> 6) & 0xF)
-#define DPOT_WIPERS(conf) ((conf >> 10) & 0xFF)
-#define DPOT_FEAT(conf) (conf >> 18)
+#define DPOT_UID(conf) (conf & 0x3F)
+#define DPOT_MAX_POS(conf) ((conf >> 6) & 0xF)
+#define DPOT_WIPERS(conf) ((conf >> 10) & 0xFF)
+#define DPOT_FEAT(conf) (conf >> 18)
-#define BRDAC0 (1 << 0)
-#define BRDAC1 (1 << 1)
-#define BRDAC2 (1 << 2)
-#define BRDAC3 (1 << 3)
-#define BRDAC4 (1 << 4)
-#define BRDAC5 (1 << 5)
+#define BRDAC0 (1 << 0)
+#define BRDAC1 (1 << 1)
+#define BRDAC2 (1 << 2)
+#define BRDAC3 (1 << 3)
+#define BRDAC4 (1 << 4)
+#define BRDAC5 (1 << 5)
+#define MAX_RDACS 6
#define F_CMD_INC (1 << 0) /* Features INC/DEC ALL, 6dB */
#define F_CMD_EEP (1 << 1) /* Features EEPROM */
@@ -116,6 +117,11 @@
AD5282_ID = DPOT_CONF(F_RDACS_RW, BRDAC0 | BRDAC1, 8, 41),
ADN2860_ID = DPOT_CONF(F_RDACS_RW_TOL | F_CMD_INC,
BRDAC0 | BRDAC1 | BRDAC2, 9, 42),
+ AD5273_ID = DPOT_CONF(F_RDACS_RW | F_CMD_OTP, BRDAC0, 6, 43),
+ AD5171_ID = DPOT_CONF(F_RDACS_RW | F_CMD_OTP, BRDAC0, 6, 44),
+ AD5170_ID = DPOT_CONF(F_RDACS_RW | F_CMD_OTP, BRDAC0, 8, 45),
+ AD5172_ID = DPOT_CONF(F_RDACS_RW | F_CMD_OTP, BRDAC0 | BRDAC1, 8, 46),
+ AD5173_ID = DPOT_CONF(F_RDACS_RW | F_CMD_OTP, BRDAC0 | BRDAC1, 8, 47),
};
#define DPOT_RDAC0 0
@@ -136,9 +142,11 @@
#define DPOT_TOL_RDAC5 (DPOT_REG_TOL | DPOT_RDAC5)
/* RDAC-to-EEPROM Interface Commands */
-#define DPOT_ADDR_RDAC (0x00 << 5)
-#define DPOT_ADDR_EEPROM (0x01 << 5)
-#define DPOT_ADDR_CMD (0x80)
+#define DPOT_ADDR_RDAC (0x0 << 5)
+#define DPOT_ADDR_EEPROM (0x1 << 5)
+#define DPOT_ADDR_OTP (0x1 << 6)
+#define DPOT_ADDR_CMD (0x1 << 7)
+#define DPOT_ADDR_OTP_EN (0x1 << 9)
#define DPOT_DEC_ALL_6DB (DPOT_ADDR_CMD | (0x4 << 3))
#define DPOT_INC_ALL_6DB (DPOT_ADDR_CMD | (0x9 << 3))
@@ -161,6 +169,12 @@
/* AD524x use special commands */
#define DPOT_AD5291_RDAC_AB 0x80
+#define DPOT_AD5273_FUSE 0x80
+#define DPOT_AD5270_2_3_FUSE 0x20
+#define DPOT_AD5270_2_3_OW 0x08
+#define DPOT_AD5272_3_A0 0x08
+#define DPOT_AD5270_2FUSE 0x80
+
struct dpot_data;
struct ad_dpot_bus_ops {