rt2x00: Factor out TXWI writing to common rt2800 code.
TXWI writing is exactly the same for rt2800pci and rt2800usb, so
make it common code.
Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index 525267d..28d82ce 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -281,6 +281,60 @@
}
EXPORT_SYMBOL_GPL(rt2800_wait_wpdma_ready);
+void rt2800_write_txwi(struct sk_buff *skb, struct txentry_desc *txdesc)
+{
+ __le32 *txwi = (__le32 *)(skb->data - TXWI_DESC_SIZE);
+ u32 word;
+
+ /*
+ * Initialize TX Info descriptor
+ */
+ rt2x00_desc_read(txwi, 0, &word);
+ rt2x00_set_field32(&word, TXWI_W0_FRAG,
+ test_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags));
+ rt2x00_set_field32(&word, TXWI_W0_MIMO_PS, 0);
+ rt2x00_set_field32(&word, TXWI_W0_CF_ACK, 0);
+ rt2x00_set_field32(&word, TXWI_W0_TS,
+ test_bit(ENTRY_TXD_REQ_TIMESTAMP, &txdesc->flags));
+ rt2x00_set_field32(&word, TXWI_W0_AMPDU,
+ test_bit(ENTRY_TXD_HT_AMPDU, &txdesc->flags));
+ rt2x00_set_field32(&word, TXWI_W0_MPDU_DENSITY, txdesc->mpdu_density);
+ rt2x00_set_field32(&word, TXWI_W0_TX_OP, txdesc->txop);
+ rt2x00_set_field32(&word, TXWI_W0_MCS, txdesc->mcs);
+ rt2x00_set_field32(&word, TXWI_W0_BW,
+ test_bit(ENTRY_TXD_HT_BW_40, &txdesc->flags));
+ rt2x00_set_field32(&word, TXWI_W0_SHORT_GI,
+ test_bit(ENTRY_TXD_HT_SHORT_GI, &txdesc->flags));
+ rt2x00_set_field32(&word, TXWI_W0_STBC, txdesc->stbc);
+ rt2x00_set_field32(&word, TXWI_W0_PHYMODE, txdesc->rate_mode);
+ rt2x00_desc_write(txwi, 0, word);
+
+ rt2x00_desc_read(txwi, 1, &word);
+ rt2x00_set_field32(&word, TXWI_W1_ACK,
+ test_bit(ENTRY_TXD_ACK, &txdesc->flags));
+ rt2x00_set_field32(&word, TXWI_W1_NSEQ,
+ test_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags));
+ rt2x00_set_field32(&word, TXWI_W1_BW_WIN_SIZE, txdesc->ba_size);
+ rt2x00_set_field32(&word, TXWI_W1_WIRELESS_CLI_ID,
+ test_bit(ENTRY_TXD_ENCRYPT, &txdesc->flags) ?
+ txdesc->key_idx : 0xff);
+ rt2x00_set_field32(&word, TXWI_W1_MPDU_TOTAL_BYTE_COUNT,
+ txdesc->length);
+ rt2x00_set_field32(&word, TXWI_W1_PACKETID, txdesc->queue + 1);
+ rt2x00_desc_write(txwi, 1, word);
+
+ /*
+ * Always write 0 to IV/EIV fields, hardware will insert the IV
+ * from the IVEIV register when TXD_W3_WIV is set to 0.
+ * When TXD_W3_WIV is set to 1 it will use the IV data
+ * from the descriptor. The TXWI_W1_WIRELESS_CLI_ID indicates which
+ * crypto entry in the registers should be used to encrypt the frame.
+ */
+ _rt2x00_desc_write(txwi, 2, 0 /* skbdesc->iv[0] */);
+ _rt2x00_desc_write(txwi, 3, 0 /* skbdesc->iv[1] */);
+}
+EXPORT_SYMBOL_GPL(rt2800_write_txwi);
+
#ifdef CONFIG_RT2X00_LIB_DEBUGFS
const struct rt2x00debug rt2800_rt2x00debug = {
.owner = THIS_MODULE,
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.h b/drivers/net/wireless/rt2x00/rt2800lib.h
index ebabeae..b805310 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.h
+++ b/drivers/net/wireless/rt2x00/rt2800lib.h
@@ -111,6 +111,8 @@
const u8 command, const u8 token,
const u8 arg0, const u8 arg1);
+void rt2800_write_txwi(struct sk_buff *skb, struct txentry_desc *txdesc);
+
extern const struct rt2x00debug rt2800_rt2x00debug;
int rt2800_rfkill_poll(struct rt2x00_dev *rt2x00dev);
diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c
index b9ec081..bd56cd1 100644
--- a/drivers/net/wireless/rt2x00/rt2800pci.c
+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
@@ -616,67 +616,13 @@
static int rt2800pci_write_tx_data(struct queue_entry* entry,
struct txentry_desc *txdesc)
{
- struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
- struct sk_buff *skb = entry->skb;
- struct skb_frame_desc *skbdesc;
int ret;
- __le32 *txwi;
- u32 word;
ret = rt2x00pci_write_tx_data(entry, txdesc);
if (ret)
return ret;
- skbdesc = get_skb_frame_desc(skb);
- txwi = (__le32 *)(skb->data - rt2x00dev->ops->extra_tx_headroom);
-
- /*
- * Initialize TX Info descriptor
- */
- rt2x00_desc_read(txwi, 0, &word);
- rt2x00_set_field32(&word, TXWI_W0_FRAG,
- test_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags));
- rt2x00_set_field32(&word, TXWI_W0_MIMO_PS, 0);
- rt2x00_set_field32(&word, TXWI_W0_CF_ACK, 0);
- rt2x00_set_field32(&word, TXWI_W0_TS,
- test_bit(ENTRY_TXD_REQ_TIMESTAMP, &txdesc->flags));
- rt2x00_set_field32(&word, TXWI_W0_AMPDU,
- test_bit(ENTRY_TXD_HT_AMPDU, &txdesc->flags));
- rt2x00_set_field32(&word, TXWI_W0_MPDU_DENSITY, txdesc->mpdu_density);
- rt2x00_set_field32(&word, TXWI_W0_TX_OP, txdesc->txop);
- rt2x00_set_field32(&word, TXWI_W0_MCS, txdesc->mcs);
- rt2x00_set_field32(&word, TXWI_W0_BW,
- test_bit(ENTRY_TXD_HT_BW_40, &txdesc->flags));
- rt2x00_set_field32(&word, TXWI_W0_SHORT_GI,
- test_bit(ENTRY_TXD_HT_SHORT_GI, &txdesc->flags));
- rt2x00_set_field32(&word, TXWI_W0_STBC, txdesc->stbc);
- rt2x00_set_field32(&word, TXWI_W0_PHYMODE, txdesc->rate_mode);
- rt2x00_desc_write(txwi, 0, word);
-
- rt2x00_desc_read(txwi, 1, &word);
- rt2x00_set_field32(&word, TXWI_W1_ACK,
- test_bit(ENTRY_TXD_ACK, &txdesc->flags));
- rt2x00_set_field32(&word, TXWI_W1_NSEQ,
- test_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags));
- rt2x00_set_field32(&word, TXWI_W1_BW_WIN_SIZE, txdesc->ba_size);
- rt2x00_set_field32(&word, TXWI_W1_WIRELESS_CLI_ID,
- test_bit(ENTRY_TXD_ENCRYPT, &txdesc->flags) ?
- txdesc->key_idx : 0xff);
- rt2x00_set_field32(&word, TXWI_W1_MPDU_TOTAL_BYTE_COUNT,
- txdesc->length);
- rt2x00_set_field32(&word, TXWI_W1_PACKETID,
- skbdesc->entry->queue->qid + 1);
- rt2x00_desc_write(txwi, 1, word);
-
- /*
- * Always write 0 to IV/EIV fields, hardware will insert the IV
- * from the IVEIV register when TXD_W3_WIV is set to 0.
- * When TXD_W3_WIV is set to 1 it will use the IV data
- * from the descriptor. The TXWI_W1_WIRELESS_CLI_ID indicates which
- * crypto entry in the registers should be used to encrypt the frame.
- */
- _rt2x00_desc_write(txwi, 2, 0 /* skbdesc->iv[0] */);
- _rt2x00_desc_write(txwi, 3, 0 /* skbdesc->iv[1] */);
+ rt2800_write_txwi(entry->skb, txdesc);
return 0;
}
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index df7ad98..b39b858 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -401,59 +401,15 @@
{
struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb);
__le32 *txi = skbdesc->desc;
- __le32 *txwi = &txi[TXINFO_DESC_SIZE / sizeof(__le32)];
u32 word;
/*
- * Initialize TX Info descriptor
+ * Initialize TXWI descriptor
*/
- rt2x00_desc_read(txwi, 0, &word);
- rt2x00_set_field32(&word, TXWI_W0_FRAG,
- test_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags));
- rt2x00_set_field32(&word, TXWI_W0_MIMO_PS, 0);
- rt2x00_set_field32(&word, TXWI_W0_CF_ACK, 0);
- rt2x00_set_field32(&word, TXWI_W0_TS,
- test_bit(ENTRY_TXD_REQ_TIMESTAMP, &txdesc->flags));
- rt2x00_set_field32(&word, TXWI_W0_AMPDU,
- test_bit(ENTRY_TXD_HT_AMPDU, &txdesc->flags));
- rt2x00_set_field32(&word, TXWI_W0_MPDU_DENSITY, txdesc->mpdu_density);
- rt2x00_set_field32(&word, TXWI_W0_TX_OP, txdesc->txop);
- rt2x00_set_field32(&word, TXWI_W0_MCS, txdesc->mcs);
- rt2x00_set_field32(&word, TXWI_W0_BW,
- test_bit(ENTRY_TXD_HT_BW_40, &txdesc->flags));
- rt2x00_set_field32(&word, TXWI_W0_SHORT_GI,
- test_bit(ENTRY_TXD_HT_SHORT_GI, &txdesc->flags));
- rt2x00_set_field32(&word, TXWI_W0_STBC, txdesc->stbc);
- rt2x00_set_field32(&word, TXWI_W0_PHYMODE, txdesc->rate_mode);
- rt2x00_desc_write(txwi, 0, word);
-
- rt2x00_desc_read(txwi, 1, &word);
- rt2x00_set_field32(&word, TXWI_W1_ACK,
- test_bit(ENTRY_TXD_ACK, &txdesc->flags));
- rt2x00_set_field32(&word, TXWI_W1_NSEQ,
- test_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags));
- rt2x00_set_field32(&word, TXWI_W1_BW_WIN_SIZE, txdesc->ba_size);
- rt2x00_set_field32(&word, TXWI_W1_WIRELESS_CLI_ID,
- test_bit(ENTRY_TXD_ENCRYPT, &txdesc->flags) ?
- txdesc->key_idx : 0xff);
- rt2x00_set_field32(&word, TXWI_W1_MPDU_TOTAL_BYTE_COUNT,
- txdesc->length);
- rt2x00_set_field32(&word, TXWI_W1_PACKETID,
- skbdesc->entry->queue->qid + 1);
- rt2x00_desc_write(txwi, 1, word);
+ rt2800_write_txwi(skb, txdesc);
/*
- * Always write 0 to IV/EIV fields, hardware will insert the IV
- * from the IVEIV register when TXINFO_W0_WIV is set to 0.
- * When TXINFO_W0_WIV is set to 1 it will use the IV data
- * from the descriptor. The TXWI_W1_WIRELESS_CLI_ID indicates which
- * crypto entry in the registers should be used to encrypt the frame.
- */
- _rt2x00_desc_write(txwi, 2, 0 /* skbdesc->iv[0] */);
- _rt2x00_desc_write(txwi, 3, 0 /* skbdesc->iv[1] */);
-
- /*
- * Initialize TX descriptor
+ * Initialize TXINFO descriptor
*/
rt2x00_desc_read(txi, 0, &word);
rt2x00_set_field32(&word, TXINFO_W0_USB_DMA_TX_PKT_LEN,