Fix occurrences of "the the "
Signed-off-by: Michael Opdenacker <michael@free-electrons.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
diff --git a/drivers/block/rd.c b/drivers/block/rd.c
index 43d4ebc..a1512da 100644
--- a/drivers/block/rd.c
+++ b/drivers/block/rd.c
@@ -151,7 +151,7 @@
}
/*
- * ->writepage to the the blockdev's mapping has to redirty the page so that the
+ * ->writepage to the blockdev's mapping has to redirty the page so that the
* VM doesn't go and steal it. We return AOP_WRITEPAGE_ACTIVATE so that the VM
* won't try to (pointlessly) write the page again for a while.
*
diff --git a/drivers/char/drm/drm_dma.c b/drivers/char/drm/drm_dma.c
index 892db70..32ed19c 100644
--- a/drivers/char/drm/drm_dma.c
+++ b/drivers/char/drm/drm_dma.c
@@ -65,7 +65,7 @@
* \param dev DRM device.
*
* Free all pages associated with DMA buffers, the buffers and pages lists, and
- * finally the the drm_device::dma structure itself.
+ * finally the drm_device::dma structure itself.
*/
void drm_dma_takedown(drm_device_t * dev)
{
diff --git a/drivers/char/drm/drm_vm.c b/drivers/char/drm/drm_vm.c
index 35540cf..b5c5b9f 100644
--- a/drivers/char/drm/drm_vm.c
+++ b/drivers/char/drm/drm_vm.c
@@ -157,7 +157,7 @@
* \param address access address.
* \return pointer to the page structure.
*
- * Get the the mapping, find the real physical page to map, get the page, and
+ * Get the mapping, find the real physical page to map, get the page, and
* return it.
*/
static __inline__ struct page *drm_do_vm_shm_nopage(struct vm_area_struct *vma,
diff --git a/drivers/char/drm/r300_reg.h b/drivers/char/drm/r300_reg.h
index a881f96..ecda760 100644
--- a/drivers/char/drm/r300_reg.h
+++ b/drivers/char/drm/r300_reg.h
@@ -293,7 +293,7 @@
# define R300_PVS_CNTL_1_PROGRAM_START_SHIFT 0
# define R300_PVS_CNTL_1_POS_END_SHIFT 10
# define R300_PVS_CNTL_1_PROGRAM_END_SHIFT 20
-/* Addresses are relative the the vertex program parameters area. */
+/* Addresses are relative to the vertex program parameters area. */
#define R300_VAP_PVS_CNTL_2 0x22D4
# define R300_PVS_CNTL_2_PARAM_OFFSET_SHIFT 0
# define R300_PVS_CNTL_2_PARAM_COUNT_SHIFT 16
diff --git a/drivers/char/pcmcia/cm4000_cs.c b/drivers/char/pcmcia/cm4000_cs.c
index e91b43a..4ea5879 100644
--- a/drivers/char/pcmcia/cm4000_cs.c
+++ b/drivers/char/pcmcia/cm4000_cs.c
@@ -1114,7 +1114,7 @@
/*
* wait for atr to become valid.
* note: it is important to lock this code. if we dont, the monitor
- * could be run between test_bit and the the call the sleep on the
+ * could be run between test_bit and the call to sleep on the
* atr-queue. if *then* the monitor detects atr valid, it will wake up
* any process on the atr-queue, *but* since we have been interrupted,
* we do not yet sleep on this queue. this would result in a missed
diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/pci/siimage.c
index c0188de..79cec50 100644
--- a/drivers/ide/pci/siimage.c
+++ b/drivers/ide/pci/siimage.c
@@ -831,7 +831,7 @@
/*
* Now set up the hw. We have to do this ourselves as
- * the MMIO layout isnt the same as the the standard port
+ * the MMIO layout isnt the same as the standard port
* based I/O
*/
diff --git a/drivers/ieee1394/nodemgr.c b/drivers/ieee1394/nodemgr.c
index 6a1a057..835937e 100644
--- a/drivers/ieee1394/nodemgr.c
+++ b/drivers/ieee1394/nodemgr.c
@@ -1702,7 +1702,7 @@
generation = get_hpsb_generation(host);
/* If we get a reset before we are done waiting, then
- * start the the waiting over again */
+ * start the waiting over again */
if (generation != g)
g = generation, i = 0;
}
diff --git a/drivers/isdn/hardware/eicon/divasync.h b/drivers/isdn/hardware/eicon/divasync.h
index af3eb9e..85784a7 100644
--- a/drivers/isdn/hardware/eicon/divasync.h
+++ b/drivers/isdn/hardware/eicon/divasync.h
@@ -216,7 +216,7 @@
#define SERIAL_HOOK_RING 0x85
#define SERIAL_HOOK_DETACH 0x8f
unsigned char Flags; /* function refinements */
- /* parameters passed by the the ATTACH request */
+ /* parameters passed by the ATTACH request */
SERIAL_INT_CB InterruptHandler; /* called on each interrupt */
SERIAL_DPC_CB DeferredHandler; /* called on hook state changes */
void *HandlerContext; /* context for both handlers */
diff --git a/drivers/isdn/hisax/hfc_usb.c b/drivers/isdn/hisax/hfc_usb.c
index 99e70d4..1f18f19 100644
--- a/drivers/isdn/hisax/hfc_usb.c
+++ b/drivers/isdn/hisax/hfc_usb.c
@@ -1217,11 +1217,11 @@
/* aux = output, reset off */
write_usb(hfc, HFCUSB_CIRM, 0x10);
- /* set USB_SIZE to match the the wMaxPacketSize for INT or BULK transfers */
+ /* set USB_SIZE to match the wMaxPacketSize for INT or BULK transfers */
write_usb(hfc, HFCUSB_USB_SIZE,
(hfc->packet_size / 8) | ((hfc->packet_size / 8) << 4));
- /* set USB_SIZE_I to match the the wMaxPacketSize for ISO transfers */
+ /* set USB_SIZE_I to match the wMaxPacketSize for ISO transfers */
write_usb(hfc, HFCUSB_USB_SIZE_I, hfc->iso_packet_size);
/* enable PCM/GCI master mode */
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-remote.c b/drivers/media/dvb/dvb-usb/dvb-usb-remote.c
index 68ed3a7..9200a30 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb-remote.c
+++ b/drivers/media/dvb/dvb-usb/dvb-usb-remote.c
@@ -3,7 +3,7 @@
* Copyright (C) 2004-6 Patrick Boettcher (patrick.boettcher@desy.de)
* see dvb-usb-init.c for copyright information.
*
- * This file contains functions for initializing the the input-device and for handling remote-control-queries.
+ * This file contains functions for initializing the input-device and for handling remote-control-queries.
*/
#include "dvb-usb-common.h"
#include <linux/usb/input.h>
diff --git a/drivers/media/dvb/frontends/tda10021.c b/drivers/media/dvb/frontends/tda10021.c
index 1105368..e725f61 100644
--- a/drivers/media/dvb/frontends/tda10021.c
+++ b/drivers/media/dvb/frontends/tda10021.c
@@ -1,6 +1,6 @@
/*
TDA10021 - Single Chip Cable Channel Receiver driver module
- used on the the Siemens DVB-C cards
+ used on the Siemens DVB-C cards
Copyright (C) 1999 Convergence Integrated Media GmbH <ralph@convergence.de>
Copyright (C) 2004 Markus Schulz <msc@antzsystem.de>
diff --git a/drivers/media/dvb/frontends/ves1x93.c b/drivers/media/dvb/frontends/ves1x93.c
index 54d7b07..23fd030 100644
--- a/drivers/media/dvb/frontends/ves1x93.c
+++ b/drivers/media/dvb/frontends/ves1x93.c
@@ -306,7 +306,7 @@
* The ves1893 sometimes returns sync values that make no sense,
* because, e.g., the SIGNAL bit is 0, while some of the higher
* bits are 1 (and how can there be a CARRIER w/o a SIGNAL?).
- * Tests showed that the the VITERBI and SYNC bits are returned
+ * Tests showed that the VITERBI and SYNC bits are returned
* reliably, while the SIGNAL and CARRIER bits ar sometimes wrong.
* If such a case occurs, we read the value again, until we get a
* valid value.
diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c
index bec6760..2c7b158 100644
--- a/drivers/media/video/em28xx/em28xx-video.c
+++ b/drivers/media/video/em28xx/em28xx-video.c
@@ -1729,7 +1729,7 @@
endpoint = &interface->cur_altsetting->endpoint[1].desc;
- /* check if the the device has the iso in endpoint at the correct place */
+ /* check if the device has the iso in endpoint at the correct place */
if ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) !=
USB_ENDPOINT_XFER_ISOC) {
em28xx_err(DRIVER_NAME " probing error: endpoint is non-ISO endpoint!\n");
diff --git a/drivers/media/video/usbvideo/vicam.c b/drivers/media/video/usbvideo/vicam.c
index 876fd27..982b115 100644
--- a/drivers/media/video/usbvideo/vicam.c
+++ b/drivers/media/video/usbvideo/vicam.c
@@ -28,7 +28,7 @@
*
* Portions of this code were also copied from usbvideo.c
*
- * Special thanks to the the whole team at Sourceforge for help making
+ * Special thanks to the whole team at Sourceforge for help making
* this driver become a reality. Notably:
* Andy Armstrong who reverse engineered the color encoding and
* Pavel Machek and Chris Cheney who worked on reverse engineering the
diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c
index 97471af..5021d1a 100644
--- a/drivers/message/fusion/mptbase.c
+++ b/drivers/message/fusion/mptbase.c
@@ -3585,7 +3585,7 @@
* index = chain_idx
*
* Calculate the number of chain buffers needed(plus 1) per I/O
- * then multiply the the maximum number of simultaneous cmds
+ * then multiply the maximum number of simultaneous cmds
*
* num_sge = num sge in request frame + last chain buffer
* scale = num sge per chain buffer if no chain element
diff --git a/drivers/mtd/maps/nettel.c b/drivers/mtd/maps/nettel.c
index 9f53c65..7b96cd02 100644
--- a/drivers/mtd/maps/nettel.c
+++ b/drivers/mtd/maps/nettel.c
@@ -358,7 +358,7 @@
/* Turn other PAR off so the first probe doesn't find it */
*intel1par = 0;
- /* Probe for the the size of the first Intel flash */
+ /* Probe for the size of the first Intel flash */
nettel_intel_map.size = maxsize;
nettel_intel_map.phys = intel0addr;
nettel_intel_map.virt = ioremap_nocache(intel0addr, maxsize);
diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c
index 000794c..0537fac 100644
--- a/drivers/mtd/onenand/onenand_base.c
+++ b/drivers/mtd/onenand/onenand_base.c
@@ -2192,7 +2192,7 @@
* @param mtd MTD device structure
*
* OneNAND detection method:
- * Compare the the values from command with ones from register
+ * Compare the values from command with ones from register
*/
static int onenand_probe(struct mtd_info *mtd)
{
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 724bce5..223517d 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -3461,7 +3461,7 @@
/*---------------------------- Hashing Policies -----------------------------*/
/*
- * Hash for the the output device based upon layer 3 and layer 4 data. If
+ * Hash for the output device based upon layer 3 and layer 4 data. If
* the packet is a frag or not TCP or UDP, just use layer 3 data. If it is
* altogether not IP, mimic bond_xmit_hash_policy_l2()
*/
diff --git a/drivers/net/eepro.c b/drivers/net/eepro.c
index 39654e1..4768023 100644
--- a/drivers/net/eepro.c
+++ b/drivers/net/eepro.c
@@ -1126,7 +1126,7 @@
printk (KERN_ERR "%s: transmit timed out, %s?\n", dev->name,
"network cable problem");
/* This is not a duplicate. One message for the console,
- one for the the log file */
+ one for the log file */
printk (KERN_DEBUG "%s: transmit timed out, %s?\n", dev->name,
"network cable problem");
eepro_complete_selreset(ioaddr);
diff --git a/drivers/net/ixgb/ixgb_ee.c b/drivers/net/ixgb/ixgb_ee.c
index f15aebd..52c99d0 100644
--- a/drivers/net/ixgb/ixgb_ee.c
+++ b/drivers/net/ixgb/ixgb_ee.c
@@ -315,7 +315,7 @@
* hw - Struct containing variables accessed by shared code
*
* Reads the first 64 16 bit words of the EEPROM and sums the values read.
- * If the the sum of the 64 16 bit words is 0xBABA, the EEPROM's checksum is
+ * If the sum of the 64 16 bit words is 0xBABA, the EEPROM's checksum is
* valid.
*
* Returns:
diff --git a/drivers/net/meth.h b/drivers/net/meth.h
index 84960da..ea3b8fc 100644
--- a/drivers/net/meth.h
+++ b/drivers/net/meth.h
@@ -126,7 +126,7 @@
/* Note: when loopback is set this bit becomes collision control. Setting this bit will */
/* cause a collision to be reported. */
- /* Bits 5 and 6 are used to determine the the Destination address filter mode */
+ /* Bits 5 and 6 are used to determine the Destination address filter mode */
#define METH_ACCEPT_MY 0 /* 00: Accept PHY address only */
#define METH_ACCEPT_MCAST 0x20 /* 01: Accept physical, broadcast, and multicast filter matches only */
#define METH_ACCEPT_AMCAST 0x40 /* 10: Accept physical, broadcast, and all multicast packets */
diff --git a/drivers/net/tulip/interrupt.c b/drivers/net/tulip/interrupt.c
index 9b08afb..ea89677 100644
--- a/drivers/net/tulip/interrupt.c
+++ b/drivers/net/tulip/interrupt.c
@@ -269,7 +269,7 @@
This would turn on IM for devices that is not contributing
to backlog congestion with unnecessary latency.
- We monitor the the device RX-ring and have:
+ We monitor the device RX-ring and have:
HW Interrupt Mitigation either ON or OFF.
diff --git a/drivers/net/tulip/winbond-840.c b/drivers/net/tulip/winbond-840.c
index fa44070..38f3b99 100644
--- a/drivers/net/tulip/winbond-840.c
+++ b/drivers/net/tulip/winbond-840.c
@@ -1021,7 +1021,7 @@
np->tx_ring[entry].length |= DescEndRing;
/* Now acquire the irq spinlock.
- * The difficult race is the the ordering between
+ * The difficult race is the ordering between
* increasing np->cur_tx and setting DescOwned:
* - if np->cur_tx is increased first the interrupt
* handler could consider the packet as transmitted
diff --git a/drivers/net/tulip/xircom_cb.c b/drivers/net/tulip/xircom_cb.c
index 985a181..2470b1e 100644
--- a/drivers/net/tulip/xircom_cb.c
+++ b/drivers/net/tulip/xircom_cb.c
@@ -1043,7 +1043,7 @@
/*
-link_status() checks the the links status and will return 0 for no link, 10 for 10mbit link and 100 for.. guess what.
+link_status() checks the links status and will return 0 for no link, 10 for 10mbit link and 100 for.. guess what.
Must be called in locked state with interrupts disabled
*/
diff --git a/drivers/net/typhoon.c b/drivers/net/typhoon.c
index f2dd776..f725735 100644
--- a/drivers/net/typhoon.c
+++ b/drivers/net/typhoon.c
@@ -639,7 +639,7 @@
typhoon_inc_cmd_index(&ring->lastWrite, num_cmd);
- /* "I feel a presence... another warrior is on the the mesa."
+ /* "I feel a presence... another warrior is on the mesa."
*/
wmb();
iowrite32(ring->lastWrite, tp->ioaddr + TYPHOON_REG_CMD_READY);
diff --git a/drivers/net/wireless/airport.c b/drivers/net/wireless/airport.c
index 38fac3b..7d5b8c2 100644
--- a/drivers/net/wireless/airport.c
+++ b/drivers/net/wireless/airport.c
@@ -149,7 +149,7 @@
/* Vitally important. If we don't do this it seems we get an
* interrupt somewhere during the power cycle, since
* hw_unavailable is already set it doesn't get ACKed, we get
- * into an interrupt loop and the the PMU decides to turn us
+ * into an interrupt loop and the PMU decides to turn us
* off. */
disable_irq(dev->irq);
diff --git a/drivers/s390/char/sclp_rw.c b/drivers/s390/char/sclp_rw.c
index bbd5b8b..d6b06ab 100644
--- a/drivers/s390/char/sclp_rw.c
+++ b/drivers/s390/char/sclp_rw.c
@@ -23,7 +23,7 @@
/*
* The room for the SCCB (only for writing) is not equal to a pages size
- * (as it is specified as the maximum size in the the SCLP documentation)
+ * (as it is specified as the maximum size in the SCLP documentation)
* because of the additional data structure described above.
*/
#define MAX_SCCB_ROOM (PAGE_SIZE - sizeof(struct sclp_buffer))
diff --git a/drivers/s390/net/qeth_main.c b/drivers/s390/net/qeth_main.c
index 29d1760..0b96d49 100644
--- a/drivers/s390/net/qeth_main.c
+++ b/drivers/s390/net/qeth_main.c
@@ -2860,7 +2860,7 @@
if (!atomic_read(&queue->set_pci_flags_count)){
/*
* there's no outstanding PCI any more, so we
- * have to request a PCI to be sure the the PCI
+ * have to request a PCI to be sure that the PCI
* will wake at some time in the future then we
* can flush packed buffers that might still be
* hanging around, which can happen if no
diff --git a/drivers/s390/scsi/zfcp_qdio.c b/drivers/s390/scsi/zfcp_qdio.c
index cb08ca3..bdf5782 100644
--- a/drivers/s390/scsi/zfcp_qdio.c
+++ b/drivers/s390/scsi/zfcp_qdio.c
@@ -222,7 +222,7 @@
* Since we have been using this adapter, it is save to assume
* that it is not failed but recoverable. The card seems to
* report link-up events by self-initiated queue shutdown.
- * That is why we need to clear the the link-down flag
+ * That is why we need to clear the link-down flag
* which is set again in case we have missed by a mile.
*/
zfcp_erp_adapter_reopen(
diff --git a/drivers/scsi/aic7xxx/aic79xx_pci.c b/drivers/scsi/aic7xxx/aic79xx_pci.c
index 8d72bba..0bada00 100644
--- a/drivers/scsi/aic7xxx/aic79xx_pci.c
+++ b/drivers/scsi/aic7xxx/aic79xx_pci.c
@@ -966,7 +966,7 @@
| AHD_BUSFREEREV_BUG;
ahd->bugs |= AHD_LQOOVERRUN_BUG|AHD_EARLY_REQ_BUG;
- /* If the user requested the the SLOWCRC bit to be set. */
+ /* If the user requested that the SLOWCRC bit to be set. */
if (aic79xx_slowcrc)
ahd->features |= AHD_AIC79XXB_SLOWCRC;
diff --git a/drivers/scsi/aic94xx/Makefile b/drivers/scsi/aic94xx/Makefile
index e6b7012..e78ce0f 100644
--- a/drivers/scsi/aic94xx/Makefile
+++ b/drivers/scsi/aic94xx/Makefile
@@ -6,7 +6,7 @@
#
# This file is licensed under GPLv2.
#
-# This file is part of the the aic94xx driver.
+# This file is part of the aic94xx driver.
#
# The aic94xx driver is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
diff --git a/drivers/scsi/dc395x.c b/drivers/scsi/dc395x.c
index a965ed3..564ea90 100644
--- a/drivers/scsi/dc395x.c
+++ b/drivers/scsi/dc395x.c
@@ -541,7 +541,7 @@
/*
- * Safe settings. If set to zero the the BIOS/default values with
+ * Safe settings. If set to zero the BIOS/default values with
* command line overrides will be used. If set to 1 then safe and
* slow settings will be used.
*/
@@ -617,7 +617,7 @@
/*
* Mapping from the eeprom delay index value (index into this array)
- * to the the number of actual seconds that the delay should be for.
+ * to the number of actual seconds that the delay should be for.
*/
static char __devinitdata eeprom_index_to_delay_map[] =
{ 1, 3, 5, 10, 16, 30, 60, 120 };
@@ -4136,7 +4136,7 @@
* @io_port: base I/O address
* @addr: offset into SEEPROM
*
- * Returns the the byte read.
+ * Returns the byte read.
**/
static u8 __devinit trms1040_get_data(unsigned long io_port, u8 addr)
{
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index 61fbcdcb..1f5a07b 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -173,7 +173,7 @@
* @retries: number of times to retry request
* @flags: or into request flags;
*
- * returns the req->errors value which is the the scsi_cmnd result
+ * returns the req->errors value which is the scsi_cmnd result
* field.
**/
int scsi_execute(struct scsi_device *sdev, const unsigned char *cmd,
diff --git a/drivers/usb/misc/auerswald.c b/drivers/usb/misc/auerswald.c
index b5332e6..88fb56d 100644
--- a/drivers/usb/misc/auerswald.c
+++ b/drivers/usb/misc/auerswald.c
@@ -1307,7 +1307,7 @@
}
-/* remove a service from the the device
+/* remove a service from the device
scp->id must be set! */
static void auerswald_removeservice (pauerswald_t cp, pauerscon_t scp)
{
diff --git a/drivers/usb/net/usbnet.h b/drivers/usb/net/usbnet.h
index cbb53e0..82db5a8 100644
--- a/drivers/usb/net/usbnet.h
+++ b/drivers/usb/net/usbnet.h
@@ -129,7 +129,7 @@
/* Drivers that reuse some of the standard USB CDC infrastructure
- * (notably, using multiple interfaces according to the the CDC
+ * (notably, using multiple interfaces according to the CDC
* union descriptor) get some helper code.
*/
struct cdc_state {
diff --git a/drivers/video/i810/i810_main.c b/drivers/video/i810/i810_main.c
index 7e76019..1a7d778 100644
--- a/drivers/video/i810/i810_main.c
+++ b/drivers/video/i810/i810_main.c
@@ -1717,7 +1717,7 @@
* @info: pointer to device specific info structure
*
* DESCRIPTION:
- * Sets the the user monitor's horizontal and vertical
+ * Sets the user monitor's horizontal and vertical
* frequency limits
*/
static void __devinit i810_init_monspecs(struct fb_info *info)
diff --git a/drivers/video/skeletonfb.c b/drivers/video/skeletonfb.c
index 842b5cd..836a612 100644
--- a/drivers/video/skeletonfb.c
+++ b/drivers/video/skeletonfb.c
@@ -14,7 +14,7 @@
* of it.
*
* First the roles of struct fb_info and struct display have changed. Struct
- * display will go away. The way the the new framebuffer console code will
+ * display will go away. The way the new framebuffer console code will
* work is that it will act to translate data about the tty/console in
* struct vc_data to data in a device independent way in struct fb_info. Then
* various functions in struct fb_ops will be called to store the device