ath6kl: add USB support
Add USB support for ar6004. Currently only firmware can be booted,
no commands can be sent to firmware yet as HTC layer doesn't work
with USB yet.
Based on patches by Kevin Fang.
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
diff --git a/drivers/net/wireless/ath/ath6kl/bmi.c b/drivers/net/wireless/ath/ath6kl/bmi.c
index bce3575..aef00d5 100644
--- a/drivers/net/wireless/ath/ath6kl/bmi.c
+++ b/drivers/net/wireless/ath/ath6kl/bmi.c
@@ -57,8 +57,14 @@
return ret;
}
- ret = ath6kl_hif_bmi_read(ar, (u8 *)&targ_info->version,
- sizeof(targ_info->version));
+ if (ar->hif_type == ATH6KL_HIF_TYPE_USB) {
+ ret = ath6kl_hif_bmi_read(ar, (u8 *)targ_info,
+ sizeof(*targ_info));
+ } else {
+ ret = ath6kl_hif_bmi_read(ar, (u8 *)&targ_info->version,
+ sizeof(targ_info->version));
+ }
+
if (ret) {
ath6kl_err("Unable to recv target info: %d\n", ret);
return ret;
diff --git a/drivers/net/wireless/ath/ath6kl/debug.h b/drivers/net/wireless/ath/ath6kl/debug.h
index c24d120..9b779aa 100644
--- a/drivers/net/wireless/ath/ath6kl/debug.h
+++ b/drivers/net/wireless/ath/ath6kl/debug.h
@@ -41,6 +41,7 @@
ATH6KL_DBG_BOOT = BIT(18), /* driver init and fw boot */
ATH6KL_DBG_WMI_DUMP = BIT(19),
ATH6KL_DBG_SUSPEND = BIT(20),
+ ATH6KL_DBG_USB = BIT(21),
ATH6KL_DBG_ANY = 0xffffffff /* enable all logs */
};
diff --git a/drivers/net/wireless/ath/ath6kl/usb.c b/drivers/net/wireless/ath/ath6kl/usb.c
new file mode 100644
index 0000000..b85ca3f
--- /dev/null
+++ b/drivers/net/wireless/ath/ath6kl/usb.c
@@ -0,0 +1,431 @@
+/*
+ * Copyright (c) 2007-2011 Atheros Communications Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/module.h>
+#include <linux/usb.h>
+
+#include "debug.h"
+#include "core.h"
+
+/* usb device object */
+struct ath6kl_usb {
+ struct usb_device *udev;
+ struct usb_interface *interface;
+ u8 *diag_cmd_buffer;
+ u8 *diag_resp_buffer;
+ struct ath6kl *ar;
+};
+
+/* diagnostic command defnitions */
+#define ATH6KL_USB_CONTROL_REQ_SEND_BMI_CMD 1
+#define ATH6KL_USB_CONTROL_REQ_RECV_BMI_RESP 2
+#define ATH6KL_USB_CONTROL_REQ_DIAG_CMD 3
+#define ATH6KL_USB_CONTROL_REQ_DIAG_RESP 4
+
+#define ATH6KL_USB_CTRL_DIAG_CC_READ 0
+#define ATH6KL_USB_CTRL_DIAG_CC_WRITE 1
+
+struct ath6kl_usb_ctrl_diag_cmd_write {
+ __le32 cmd;
+ __le32 address;
+ __le32 value;
+ __le32 _pad[1];
+} __packed;
+
+struct ath6kl_usb_ctrl_diag_cmd_read {
+ __le32 cmd;
+ __le32 address;
+} __packed;
+
+struct ath6kl_usb_ctrl_diag_resp_read {
+ __le32 value;
+} __packed;
+
+#define ATH6KL_USB_MAX_DIAG_CMD (sizeof(struct ath6kl_usb_ctrl_diag_cmd_write))
+#define ATH6KL_USB_MAX_DIAG_RESP (sizeof(struct ath6kl_usb_ctrl_diag_resp_read))
+
+static void ath6kl_usb_destroy(struct ath6kl_usb *ar_usb)
+{
+ usb_set_intfdata(ar_usb->interface, NULL);
+
+ kfree(ar_usb->diag_cmd_buffer);
+ kfree(ar_usb->diag_resp_buffer);
+
+ kfree(ar_usb);
+}
+
+static struct ath6kl_usb *ath6kl_usb_create(struct usb_interface *interface)
+{
+ struct ath6kl_usb *ar_usb = NULL;
+ struct usb_device *dev = interface_to_usbdev(interface);
+ int status = 0;
+
+ ar_usb = kzalloc(sizeof(struct ath6kl_usb), GFP_KERNEL);
+ if (ar_usb == NULL)
+ goto fail_ath6kl_usb_create;
+
+ memset(ar_usb, 0, sizeof(struct ath6kl_usb));
+ usb_set_intfdata(interface, ar_usb);
+ ar_usb->udev = dev;
+ ar_usb->interface = interface;
+
+ ar_usb->diag_cmd_buffer = kzalloc(ATH6KL_USB_MAX_DIAG_CMD, GFP_KERNEL);
+ if (ar_usb->diag_cmd_buffer == NULL) {
+ status = -ENOMEM;
+ goto fail_ath6kl_usb_create;
+ }
+
+ ar_usb->diag_resp_buffer = kzalloc(ATH6KL_USB_MAX_DIAG_RESP,
+ GFP_KERNEL);
+ if (ar_usb->diag_resp_buffer == NULL) {
+ status = -ENOMEM;
+ goto fail_ath6kl_usb_create;
+ }
+
+fail_ath6kl_usb_create:
+ if (status != 0) {
+ ath6kl_usb_destroy(ar_usb);
+ ar_usb = NULL;
+ }
+ return ar_usb;
+}
+
+static void ath6kl_usb_device_detached(struct usb_interface *interface)
+{
+ struct ath6kl_usb *ar_usb;
+
+ ar_usb = usb_get_intfdata(interface);
+ if (ar_usb == NULL)
+ return;
+
+ ath6kl_stop_txrx(ar_usb->ar);
+
+ ath6kl_core_cleanup(ar_usb->ar);
+
+ ath6kl_usb_destroy(ar_usb);
+}
+
+static int ath6kl_usb_submit_ctrl_out(struct ath6kl_usb *ar_usb,
+ u8 req, u16 value, u16 index, void *data,
+ u32 size)
+{
+ u8 *buf = NULL;
+ int ret;
+
+ if (size > 0) {
+ buf = kmalloc(size, GFP_KERNEL);
+ if (buf == NULL)
+ return -ENOMEM;
+
+ memcpy(buf, data, size);
+ }
+
+ /* note: if successful returns number of bytes transfered */
+ ret = usb_control_msg(ar_usb->udev,
+ usb_sndctrlpipe(ar_usb->udev, 0),
+ req,
+ USB_DIR_OUT | USB_TYPE_VENDOR |
+ USB_RECIP_DEVICE, value, index, buf,
+ size, 1000);
+
+ if (ret < 0) {
+ ath6kl_dbg(ATH6KL_DBG_USB, "%s failed,result = %d\n",
+ __func__, ret);
+ }
+
+ kfree(buf);
+
+ return 0;
+}
+
+static int ath6kl_usb_submit_ctrl_in(struct ath6kl_usb *ar_usb,
+ u8 req, u16 value, u16 index, void *data,
+ u32 size)
+{
+ u8 *buf = NULL;
+ int ret;
+
+ if (size > 0) {
+ buf = kmalloc(size, GFP_KERNEL);
+ if (buf == NULL)
+ return -ENOMEM;
+ }
+
+ /* note: if successful returns number of bytes transfered */
+ ret = usb_control_msg(ar_usb->udev,
+ usb_rcvctrlpipe(ar_usb->udev, 0),
+ req,
+ USB_DIR_IN | USB_TYPE_VENDOR |
+ USB_RECIP_DEVICE, value, index, buf,
+ size, 2 * HZ);
+
+ if (ret < 0) {
+ ath6kl_dbg(ATH6KL_DBG_USB, "%s failed,result = %d\n",
+ __func__, ret);
+ }
+
+ memcpy((u8 *) data, buf, size);
+
+ kfree(buf);
+
+ return 0;
+}
+
+static int ath6kl_usb_ctrl_msg_exchange(struct ath6kl_usb *ar_usb,
+ u8 req_val, u8 *req_buf, u32 req_len,
+ u8 resp_val, u8 *resp_buf, u32 *resp_len)
+{
+ int ret;
+
+ /* send command */
+ ret = ath6kl_usb_submit_ctrl_out(ar_usb, req_val, 0, 0,
+ req_buf, req_len);
+
+ if (ret != 0)
+ return ret;
+
+ if (resp_buf == NULL) {
+ /* no expected response */
+ return ret;
+ }
+
+ /* get response */
+ ret = ath6kl_usb_submit_ctrl_in(ar_usb, resp_val, 0, 0,
+ resp_buf, *resp_len);
+
+ return ret;
+}
+
+static int ath6kl_usb_diag_read32(struct ath6kl *ar, u32 address, u32 *data)
+{
+ struct ath6kl_usb *ar_usb = ar->hif_priv;
+ struct ath6kl_usb_ctrl_diag_resp_read *resp;
+ struct ath6kl_usb_ctrl_diag_cmd_read *cmd;
+ u32 resp_len;
+ int ret;
+
+ cmd = (struct ath6kl_usb_ctrl_diag_cmd_read *) ar_usb->diag_cmd_buffer;
+
+ memset(cmd, 0, sizeof(*cmd));
+ cmd->cmd = ATH6KL_USB_CTRL_DIAG_CC_READ;
+ cmd->address = cpu_to_le32(address);
+ resp_len = sizeof(*resp);
+
+ ret = ath6kl_usb_ctrl_msg_exchange(ar_usb,
+ ATH6KL_USB_CONTROL_REQ_DIAG_CMD,
+ (u8 *) cmd,
+ sizeof(struct ath6kl_usb_ctrl_diag_cmd_write),
+ ATH6KL_USB_CONTROL_REQ_DIAG_RESP,
+ ar_usb->diag_resp_buffer, &resp_len);
+
+ if (ret)
+ return ret;
+
+ resp = (struct ath6kl_usb_ctrl_diag_resp_read *)
+ ar_usb->diag_resp_buffer;
+
+ *data = le32_to_cpu(resp->value);
+
+ return ret;
+}
+
+static int ath6kl_usb_diag_write32(struct ath6kl *ar, u32 address, __le32 data)
+{
+ struct ath6kl_usb *ar_usb = ar->hif_priv;
+ struct ath6kl_usb_ctrl_diag_cmd_write *cmd;
+
+ cmd = (struct ath6kl_usb_ctrl_diag_cmd_write *) ar_usb->diag_cmd_buffer;
+
+ memset(cmd, 0, sizeof(struct ath6kl_usb_ctrl_diag_cmd_write));
+ cmd->cmd = cpu_to_le32(ATH6KL_USB_CTRL_DIAG_CC_WRITE);
+ cmd->address = cpu_to_le32(address);
+ cmd->value = data;
+
+ return ath6kl_usb_ctrl_msg_exchange(ar_usb,
+ ATH6KL_USB_CONTROL_REQ_DIAG_CMD,
+ (u8 *) cmd,
+ sizeof(*cmd),
+ 0, NULL, NULL);
+
+}
+
+static int ath6kl_usb_bmi_read(struct ath6kl *ar, u8 *buf, u32 len)
+{
+ struct ath6kl_usb *ar_usb = ar->hif_priv;
+ int ret;
+
+ /* get response */
+ ret = ath6kl_usb_submit_ctrl_in(ar_usb,
+ ATH6KL_USB_CONTROL_REQ_RECV_BMI_RESP,
+ 0, 0, buf, len);
+ if (ret != 0) {
+ ath6kl_err("Unable to read the bmi data from the device: %d\n",
+ ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int ath6kl_usb_bmi_write(struct ath6kl *ar, u8 *buf, u32 len)
+{
+ struct ath6kl_usb *ar_usb = ar->hif_priv;
+ int ret;
+
+ /* send command */
+ ret = ath6kl_usb_submit_ctrl_out(ar_usb,
+ ATH6KL_USB_CONTROL_REQ_SEND_BMI_CMD,
+ 0, 0, buf, len);
+ if (ret != 0) {
+ ath6kl_err("unable to send the bmi data to the device: %d\n",
+ ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int ath6kl_usb_power_on(struct ath6kl *ar)
+{
+ return 0;
+}
+
+static int ath6kl_usb_power_off(struct ath6kl *ar)
+{
+ return 0;
+}
+
+static const struct ath6kl_hif_ops ath6kl_usb_ops = {
+ .diag_read32 = ath6kl_usb_diag_read32,
+ .diag_write32 = ath6kl_usb_diag_write32,
+ .bmi_read = ath6kl_usb_bmi_read,
+ .bmi_write = ath6kl_usb_bmi_write,
+ .power_on = ath6kl_usb_power_on,
+ .power_off = ath6kl_usb_power_off,
+};
+
+/* ath6kl usb driver registered functions */
+static int ath6kl_usb_probe(struct usb_interface *interface,
+ const struct usb_device_id *id)
+{
+ struct usb_device *dev = interface_to_usbdev(interface);
+ struct ath6kl *ar;
+ struct ath6kl_usb *ar_usb = NULL;
+ int vendor_id, product_id;
+ int ret = 0;
+
+ usb_get_dev(dev);
+
+ vendor_id = le16_to_cpu(dev->descriptor.idVendor);
+ product_id = le16_to_cpu(dev->descriptor.idProduct);
+
+ ath6kl_dbg(ATH6KL_DBG_USB, "vendor_id = %04x\n", vendor_id);
+ ath6kl_dbg(ATH6KL_DBG_USB, "product_id = %04x\n", product_id);
+
+ if (interface->cur_altsetting)
+ ath6kl_dbg(ATH6KL_DBG_USB, "USB Interface %d\n",
+ interface->cur_altsetting->desc.bInterfaceNumber);
+
+
+ if (dev->speed == USB_SPEED_HIGH)
+ ath6kl_dbg(ATH6KL_DBG_USB, "USB 2.0 Host\n");
+ else
+ ath6kl_dbg(ATH6KL_DBG_USB, "USB 1.1 Host\n");
+
+ ar_usb = ath6kl_usb_create(interface);
+
+ if (ar_usb == NULL) {
+ ret = -ENOMEM;
+ goto err_usb_put;
+ }
+
+ ar = ath6kl_core_alloc(&ar_usb->udev->dev);
+ if (ar == NULL) {
+ ath6kl_err("Failed to alloc ath6kl core\n");
+ ret = -ENOMEM;
+ goto err_usb_destroy;
+ }
+
+ ar->hif_priv = ar_usb;
+ ar->hif_type = ATH6KL_HIF_TYPE_USB;
+ ar->hif_ops = &ath6kl_usb_ops;
+ ar->mbox_info.block_size = 16;
+ ar->bmi.max_data_size = 252;
+
+ ar_usb->ar = ar;
+
+ ret = ath6kl_core_init(ar);
+ if (ret) {
+ ath6kl_err("Failed to init ath6kl core: %d\n", ret);
+ goto err_core_free;
+ }
+
+ return ret;
+
+err_core_free:
+ ath6kl_core_free(ar);
+err_usb_destroy:
+ ath6kl_usb_destroy(ar_usb);
+err_usb_put:
+ usb_put_dev(dev);
+
+ return ret;
+}
+
+static void ath6kl_usb_remove(struct usb_interface *interface)
+{
+ usb_put_dev(interface_to_usbdev(interface));
+ ath6kl_usb_device_detached(interface);
+}
+
+/* table of devices that work with this driver */
+static struct usb_device_id ath6kl_usb_ids[] = {
+ {USB_DEVICE(0x0cf3, 0x9374)},
+ { /* Terminating entry */ },
+};
+
+MODULE_DEVICE_TABLE(usb, ath6kl_usb_ids);
+
+static struct usb_driver ath6kl_usb_driver = {
+ .name = "ath6kl_usb",
+ .probe = ath6kl_usb_probe,
+ .disconnect = ath6kl_usb_remove,
+ .id_table = ath6kl_usb_ids,
+};
+
+static int ath6kl_usb_init(void)
+{
+ usb_register(&ath6kl_usb_driver);
+ return 0;
+}
+
+static void ath6kl_usb_exit(void)
+{
+ usb_deregister(&ath6kl_usb_driver);
+}
+
+module_init(ath6kl_usb_init);
+module_exit(ath6kl_usb_exit);
+
+MODULE_AUTHOR("Atheros Communications, Inc.");
+MODULE_DESCRIPTION("Driver support for Atheros AR600x USB devices");
+MODULE_LICENSE("Dual BSD/GPL");
+MODULE_FIRMWARE(AR6004_REV1_FIRMWARE_FILE);
+MODULE_FIRMWARE(AR6004_REV1_BOARD_DATA_FILE);
+MODULE_FIRMWARE(AR6004_REV1_DEFAULT_BOARD_DATA_FILE);
+MODULE_FIRMWARE(AR6004_REV2_FIRMWARE_FILE);
+MODULE_FIRMWARE(AR6004_REV2_BOARD_DATA_FILE);
+MODULE_FIRMWARE(AR6004_REV2_DEFAULT_BOARD_DATA_FILE);