ARM: dts: msm: add pinctrl devices for PM8998, PMI8998, PM8005 PMIC GPIOs
Add pinctrl devices for the GPIOs in PM8998, PMI8998, and PM8005 chips.
This allows consumers to manage the GPIOs using pinctrl configurations.
CRs-Fixed: 2020939
Change-Id: I54f00699e2011768931c387d3cd20929d2da5a73
Signed-off-by: Fenglin Wu <fenglinw@codeaurora.org>
diff --git a/arch/arm64/boot/dts/qcom/pmi8998.dtsi b/arch/arm64/boot/dts/qcom/pmi8998.dtsi
index 1659706..44658b8 100644
--- a/arch/arm64/boot/dts/qcom/pmi8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmi8998.dtsi
@@ -38,97 +38,29 @@
label = "pmi8998_tz";
};
- pmi8998_gpios: gpios {
- compatible = "qcom,qpnp-pin";
+ pmi8998_gpios: pinctrl@c000 {
+ compatible = "qcom,spmi-gpio";
+ reg = <0xc000 0xe00>;
+ interrupts = <0x2 0xc0 0 IRQ_TYPE_NONE>,
+ <0x2 0xc1 0 IRQ_TYPE_NONE>,
+ <0x2 0xc2 0 IRQ_TYPE_NONE>,
+ <0x2 0xc4 0 IRQ_TYPE_NONE>,
+ <0x2 0xc5 0 IRQ_TYPE_NONE>,
+ <0x2 0xc7 0 IRQ_TYPE_NONE>,
+ <0x2 0xc8 0 IRQ_TYPE_NONE>,
+ <0x2 0xc9 0 IRQ_TYPE_NONE>,
+ <0x2 0xca 0 IRQ_TYPE_NONE>,
+ <0x2 0xcb 0 IRQ_TYPE_NONE>,
+ <0x2 0xcd 0 IRQ_TYPE_NONE>;
+ interrupt-names = "pmi8998_gpio1", "pmi8998_gpio2",
+ "pmi8998_gpio3", "pmi8998_gpio5",
+ "pmi8998_gpio6", "pmi8998_gpio8",
+ "pmi8998_gpio9", "pmi8998_gpio10",
+ "pmi8998_gpio11", "pmi8998_gpio12",
+ "pmi8998_gpio14";
gpio-controller;
#gpio-cells = <2>;
- #address-cells = <1>;
- #size-cells = <1>;
- label = "pmi8998-gpio";
-
- gpio@c000 {
- reg = <0xc000 0x100>;
- qcom,pin-num = <1>;
- status = "disabled";
- };
-
- gpio@c100 {
- reg = <0xc100 0x100>;
- qcom,pin-num = <2>;
- status = "disabled";
- };
-
- gpio@c200 {
- reg = <0xc200 0x100>;
- qcom,pin-num = <3>;
- status = "disabled";
- };
-
- gpio@c300 {
- reg = <0xc300 0x100>;
- qcom,pin-num = <4>;
- status = "disabled";
- };
-
- gpio@c400 {
- reg = <0xc400 0x100>;
- qcom,pin-num = <5>;
- status = "disabled";
- };
-
- gpio@c500 {
- reg = <0xc500 0x100>;
- qcom,pin-num = <6>;
- status = "disabled";
- };
-
- gpio@c600 {
- reg = <0xc600 0x100>;
- qcom,pin-num = <7>;
- status = "disabled";
- };
-
- gpio@c700 {
- reg = <0xc700 0x100>;
- qcom,pin-num = <8>;
- status = "disabled";
- };
-
- gpio@c800 {
- reg = <0xc800 0x100>;
- qcom,pin-num = <9>;
- status = "disabled";
- };
-
- gpio@c900 {
- reg = <0xc900 0x100>;
- qcom,pin-num = <10>;
- status = "disabled";
- };
-
- gpio@ca00 {
- reg = <0xca00 0x100>;
- qcom,pin-num = <11>;
- status = "disabled";
- };
-
- gpio@cb00 {
- reg = <0xcb00 0x100>;
- qcom,pin-num = <12>;
- status = "disabled";
- };
-
- gpio@cc00 {
- reg = <0xcc00 0x100>;
- qcom,pin-num = <13>;
- status = "disabled";
- };
-
- gpio@cd00 {
- reg = <0xcd00 0x100>;
- qcom,pin-num = <14>;
- status = "disabled";
- };
+ qcom,gpios-disallowed = <4 7 13>;
};
pmi8998_rradc: rradc@4500 {