MIPS: BCM63xx: Fix SPI message control register handling for BCM6338/6348.
BCM6338 and BCM6348 have a message control register width of 8 bits, instead
of 16-bits like what the SPI driver assumes right now. Also the SPI message
type shift value of 14 is actually 6 for these SoCs.
This resulted in transmit FIFO corruption because we were writing 16-bits
to an 8-bits wide register, thus spanning on the first byte of the transmit
FIFO, which had already been filed in bcm63xx_spi_fill_txrx_fifo().
Fix this by passing the message control register width and message type
shift through platform data back to the SPI driver so that it can use
it properly.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: grant.likely@secretlab.ca
Cc: spi-devel-general@lists.sourceforge.net
Cc: jonas.gorski@gmail.com
Patchwork: https://patchwork.linux-mips.org/patch/3983/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
diff --git a/drivers/spi/spi-bcm63xx.c b/drivers/spi/spi-bcm63xx.c
index 6e25ef1..b7d61e7 100644
--- a/drivers/spi/spi-bcm63xx.c
+++ b/drivers/spi/spi-bcm63xx.c
@@ -47,6 +47,8 @@
/* Platform data */
u32 speed_hz;
unsigned fifo_size;
+ unsigned int msg_type_shift;
+ unsigned int msg_ctl_width;
/* Data buffers */
const unsigned char *tx_ptr;
@@ -221,13 +223,20 @@
msg_ctl = (t->len << SPI_BYTE_CNT_SHIFT);
if (t->rx_buf && t->tx_buf)
- msg_ctl |= (SPI_FD_RW << SPI_MSG_TYPE_SHIFT);
+ msg_ctl |= (SPI_FD_RW << bs->msg_type_shift);
else if (t->rx_buf)
- msg_ctl |= (SPI_HD_R << SPI_MSG_TYPE_SHIFT);
+ msg_ctl |= (SPI_HD_R << bs->msg_type_shift);
else if (t->tx_buf)
- msg_ctl |= (SPI_HD_W << SPI_MSG_TYPE_SHIFT);
+ msg_ctl |= (SPI_HD_W << bs->msg_type_shift);
- bcm_spi_writew(bs, msg_ctl, SPI_MSG_CTL);
+ switch (bs->msg_ctl_width) {
+ case 8:
+ bcm_spi_writeb(bs, msg_ctl, SPI_MSG_CTL);
+ break;
+ case 16:
+ bcm_spi_writew(bs, msg_ctl, SPI_MSG_CTL);
+ break;
+ }
/* Issue the transfer */
cmd = SPI_CMD_START_IMMEDIATE;
@@ -406,9 +415,21 @@
master->transfer_one_message = bcm63xx_spi_transfer_one;
master->mode_bits = MODEBITS;
bs->speed_hz = pdata->speed_hz;
+ bs->msg_type_shift = pdata->msg_type_shift;
+ bs->msg_ctl_width = pdata->msg_ctl_width;
bs->tx_io = (u8 *)(bs->regs + bcm63xx_spireg(SPI_MSG_DATA));
bs->rx_io = (const u8 *)(bs->regs + bcm63xx_spireg(SPI_RX_DATA));
+ switch (bs->msg_ctl_width) {
+ case 8:
+ case 16:
+ break;
+ default:
+ dev_err(dev, "unsupported MSG_CTL width: %d\n",
+ bs->msg_ctl_width);
+ goto out_clk_disable;
+ }
+
/* Initialize hardware */
clk_enable(bs->clk);
bcm_spi_writeb(bs, SPI_INTR_CLEAR_ALL, SPI_INT_STATUS);