diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index b9a3fdc..00928d2 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -298,3 +298,11 @@
 Who:	Roland Dreier <rolandd@cisco.com>
 
 ---------------------------
+
+What:   sk98lin network driver
+When:   Feburary 2008
+Why:    In kernel tree version of driver is unmaintained. Sk98lin driver
+	replaced by the skge driver. 
+Who:    Stephen Hemminger <shemminger@linux-foundation.org>
+
+---------------------------
diff --git a/Documentation/networking/00-INDEX b/Documentation/networking/00-INDEX
index d63f480..153d84d 100644
--- a/Documentation/networking/00-INDEX
+++ b/Documentation/networking/00-INDEX
@@ -96,6 +96,9 @@
 	- the new routing mechanism
 shaper.txt
 	- info on the module that can shape/limit transmitted traffic.
+sk98lin.txt
+	- Marvell Yukon Chipset / SysKonnect SK-98xx compliant Gigabit
+	  Ethernet Adapter family driver info
 skfp.txt
 	- SysKonnect FDDI (SK-5xxx, Compaq Netelligent) driver info.
 smc9.txt
diff --git a/Documentation/networking/sk98lin.txt b/Documentation/networking/sk98lin.txt
new file mode 100644
index 0000000..8590a95
--- /dev/null
+++ b/Documentation/networking/sk98lin.txt
@@ -0,0 +1,568 @@
+(C)Copyright 1999-2004 Marvell(R).
+All rights reserved
+===========================================================================
+
+sk98lin.txt created 13-Feb-2004
+
+Readme File for sk98lin v6.23
+Marvell Yukon/SysKonnect SK-98xx Gigabit Ethernet Adapter family driver for LINUX
+
+This file contains
+ 1  Overview
+ 2  Required Files
+ 3  Installation
+    3.1  Driver Installation
+    3.2  Inclusion of adapter at system start
+ 4  Driver Parameters
+    4.1  Per-Port Parameters
+    4.2  Adapter Parameters
+ 5  Large Frame Support
+ 6  VLAN and Link Aggregation Support (IEEE 802.1, 802.1q, 802.3ad)
+ 7  Troubleshooting
+
+===========================================================================
+
+
+1  Overview
+===========
+
+The sk98lin driver supports the Marvell Yukon and SysKonnect 
+SK-98xx/SK-95xx compliant Gigabit Ethernet Adapter on Linux. It has 
+been tested with Linux on Intel/x86 machines.
+***
+
+
+2  Required Files
+=================
+
+The linux kernel source.
+No additional files required.
+***
+
+
+3  Installation
+===============
+
+It is recommended to download the latest version of the driver from the 
+SysKonnect web site www.syskonnect.com. If you have downloaded the latest
+driver, the Linux kernel has to be patched before the driver can be 
+installed. For details on how to patch a Linux kernel, refer to the 
+patch.txt file.
+
+3.1  Driver Installation
+------------------------
+
+The following steps describe the actions that are required to install
+the driver and to start it manually. These steps should be carried
+out for the initial driver setup. Once confirmed to be ok, they can
+be included in the system start.
+
+NOTE 1: To perform the following tasks you need 'root' access.
+
+NOTE 2: In case of problems, please read the section "Troubleshooting" 
+        below.
+
+The driver can either be integrated into the kernel or it can be compiled 
+as a module. Select the appropriate option during the kernel 
+configuration.
+
+Compile/use the driver as a module
+----------------------------------
+To compile the driver, go to the directory /usr/src/linux and
+execute the command "make menuconfig" or "make xconfig" and proceed as 
+follows:
+
+To integrate the driver permanently into the kernel, proceed as follows:
+
+1. Select the menu "Network device support" and then "Ethernet(1000Mbit)"
+2. Mark "Marvell Yukon Chipset / SysKonnect SK-98xx family support" 
+   with (*) 
+3. Build a new kernel when the configuration of the above options is 
+   finished.
+4. Install the new kernel.
+5. Reboot your system.
+
+To use the driver as a module, proceed as follows:
+
+1. Enable 'loadable module support' in the kernel.
+2. For automatic driver start, enable the 'Kernel module loader'.
+3. Select the menu "Network device support" and then "Ethernet(1000Mbit)"
+4. Mark "Marvell Yukon Chipset / SysKonnect SK-98xx family support" 
+   with (M)
+5. Execute the command "make modules".
+6. Execute the command "make modules_install".
+   The appropriate modules will be installed.
+7. Reboot your system.
+
+
+Load the module manually
+------------------------
+To load the module manually, proceed as follows:
+
+1. Enter "modprobe sk98lin".
+2. If a Marvell Yukon or SysKonnect SK-98xx adapter is installed in 
+   your computer and you have a /proc file system, execute the command:
+   "ls /proc/net/sk98lin/" 
+   This should produce an output containing a line with the following 
+   format:
+   eth0   eth1  ...
+   which indicates that your adapter has been found and initialized.
+   
+   NOTE 1: If you have more than one Marvell Yukon or SysKonnect SK-98xx 
+           adapter installed, the adapters will be listed as 'eth0', 
+                   'eth1', 'eth2', etc.
+                   For each adapter, repeat steps 3 and 4 below.
+
+   NOTE 2: If you have other Ethernet adapters installed, your Marvell
+           Yukon or SysKonnect SK-98xx adapter will be mapped to the 
+                   next available number, e.g. 'eth1'. The mapping is executed 
+                   automatically.
+           The module installation message (displayed either in a system
+           log file or on the console) prints a line for each adapter 
+           found containing the corresponding 'ethX'.
+
+3. Select an IP address and assign it to the respective adapter by 
+   entering:
+   ifconfig eth0 <ip-address>
+   With this command, the adapter is connected to the Ethernet. 
+   
+   SK-98xx Gigabit Ethernet Server Adapters: The yellow LED on the adapter 
+   is now active, the link status LED of the primary port is active and 
+   the link status LED of the secondary port (on dual port adapters) is 
+   blinking (if the ports are connected to a switch or hub).
+   SK-98xx V2.0 Gigabit Ethernet Adapters: The link status LED is active.
+   In addition, you will receive a status message on the console stating
+   "ethX: network connection up using port Y" and showing the selected 
+   connection parameters (x stands for the ethernet device number 
+   (0,1,2, etc), y stands for the port name (A or B)).
+
+   NOTE: If you are in doubt about IP addresses, ask your network
+         administrator for assistance.
+  
+4. Your adapter should now be fully operational.
+   Use 'ping <otherstation>' to verify the connection to other computers 
+   on your network.
+5. To check the adapter configuration view /proc/net/sk98lin/[devicename].
+   For example by executing:    
+   "cat /proc/net/sk98lin/eth0" 
+
+Unload the module
+-----------------
+To stop and unload the driver modules, proceed as follows:
+
+1. Execute the command "ifconfig eth0 down".
+2. Execute the command "rmmod sk98lin".
+
+3.2  Inclusion of adapter at system start
+-----------------------------------------
+
+Since a large number of different Linux distributions are 
+available, we are unable to describe a general installation procedure
+for the driver module.
+Because the driver is now integrated in the kernel, installation should
+be easy, using the standard mechanism of your distribution.
+Refer to the distribution's manual for installation of ethernet adapters.
+
+***
+
+4  Driver Parameters
+====================
+
+Parameters can be set at the command line after the module has been 
+loaded with the command 'modprobe'.
+In some distributions, the configuration tools are able to pass parameters
+to the driver module.
+
+If you use the kernel module loader, you can set driver parameters
+in the file /etc/modprobe.conf (or /etc/modules.conf in 2.4 or earlier).
+To set the driver parameters in this file, proceed as follows:
+
+1. Insert a line of the form :
+   options sk98lin ...
+   For "...", the same syntax is required as described for the command
+   line parameters of modprobe below.
+2. To activate the new parameters, either reboot your computer
+   or 
+   unload and reload the driver.
+   The syntax of the driver parameters is:
+
+        modprobe sk98lin parameter=value1[,value2[,value3...]]
+
+   where value1 refers to the first adapter, value2 to the second etc.
+
+NOTE: All parameters are case sensitive. Write them exactly as shown 
+      below.
+
+Example:
+Suppose you have two adapters. You want to set auto-negotiation
+on the first adapter to ON and on the second adapter to OFF.
+You also want to set DuplexCapabilities on the first adapter
+to FULL, and on the second adapter to HALF.
+Then, you must enter:
+
+        modprobe sk98lin AutoNeg_A=On,Off DupCap_A=Full,Half
+
+NOTE: The number of adapters that can be configured this way is
+      limited in the driver (file skge.c, constant SK_MAX_CARD_PARAM).
+      The current limit is 16. If you happen to install
+      more adapters, adjust this and recompile.
+
+
+4.1  Per-Port Parameters
+------------------------
+
+These settings are available for each port on the adapter.
+In the following description, '?' stands for the port for
+which you set the parameter (A or B).
+
+Speed
+-----
+Parameter:    Speed_?
+Values:       10, 100, 1000, Auto
+Default:      Auto
+
+This parameter is used to set the speed capabilities. It is only valid 
+for the SK-98xx V2.0 copper adapters.
+Usually, the speed is negotiated between the two ports during link 
+establishment. If this fails, a port can be forced to a specific setting
+with this parameter.
+
+Auto-Negotiation
+----------------
+Parameter:    AutoNeg_?
+Values:       On, Off, Sense
+Default:      On
+  
+The "Sense"-mode automatically detects whether the link partner supports
+auto-negotiation or not.
+
+Duplex Capabilities
+-------------------
+Parameter:    DupCap_?
+Values:       Half, Full, Both
+Default:      Both
+
+This parameters is only relevant if auto-negotiation for this port is 
+not set to "Sense". If auto-negotiation is set to "On", all three values
+are possible. If it is set to "Off", only "Full" and "Half" are allowed.
+This parameter is useful if your link partner does not support all
+possible combinations.
+
+Flow Control
+------------
+Parameter:    FlowCtrl_?
+Values:       Sym, SymOrRem, LocSend, None
+Default:      SymOrRem
+
+This parameter can be used to set the flow control capabilities the 
+port reports during auto-negotiation. It can be set for each port 
+individually.
+Possible modes:
+   -- Sym      = Symmetric: both link partners are allowed to send 
+                  PAUSE frames
+   -- SymOrRem = SymmetricOrRemote: both or only remote partner 
+                  are allowed to send PAUSE frames
+   -- LocSend  = LocalSend: only local link partner is allowed 
+                  to send PAUSE frames
+   -- None     = no link partner is allowed to send PAUSE frames
+  
+NOTE: This parameter is ignored if auto-negotiation is set to "Off".
+
+Role in Master-Slave-Negotiation (1000Base-T only)
+--------------------------------------------------
+Parameter:    Role_?
+Values:       Auto, Master, Slave
+Default:      Auto
+
+This parameter is only valid for the SK-9821 and SK-9822 adapters.
+For two 1000Base-T ports to communicate, one must take the role of the
+master (providing timing information), while the other must be the 
+slave. Usually, this is negotiated between the two ports during link 
+establishment. If this fails, a port can be forced to a specific setting
+with this parameter.
+
+
+4.2  Adapter Parameters
+-----------------------
+
+Connection Type (SK-98xx V2.0 copper adapters only)
+---------------
+Parameter:    ConType
+Values:       Auto, 100FD, 100HD, 10FD, 10HD
+Default:      Auto
+
+The parameter 'ConType' is a combination of all five per-port parameters
+within one single parameter. This simplifies the configuration of both ports
+of an adapter card! The different values of this variable reflect the most 
+meaningful combinations of port parameters.
+
+The following table shows the values of 'ConType' and the corresponding
+combinations of the per-port parameters:
+
+    ConType   |  DupCap   AutoNeg   FlowCtrl   Role             Speed
+    ----------+------------------------------------------------------
+    Auto      |  Both     On        SymOrRem   Auto             Auto
+    100FD     |  Full     Off       None       Auto (ignored)   100
+    100HD     |  Half     Off       None       Auto (ignored)   100
+    10FD      |  Full     Off       None       Auto (ignored)   10
+    10HD      |  Half     Off       None       Auto (ignored)   10
+
+Stating any other port parameter together with this 'ConType' variable
+will result in a merged configuration of those settings. This due to 
+the fact, that the per-port parameters (e.g. Speed_? ) have a higher
+priority than the combined variable 'ConType'.
+
+NOTE: This parameter is always used on both ports of the adapter card.
+
+Interrupt Moderation
+--------------------
+Parameter:    Moderation
+Values:       None, Static, Dynamic
+Default:      None
+
+Interrupt moderation is employed to limit the maximum number of interrupts
+the driver has to serve. That is, one or more interrupts (which indicate any
+transmit or receive packet to be processed) are queued until the driver 
+processes them. When queued interrupts are to be served, is determined by the
+'IntsPerSec' parameter, which is explained later below.
+
+Possible modes:
+
+   -- None - No interrupt moderation is applied on the adapter card. 
+      Therefore, each transmit or receive interrupt is served immediately
+      as soon as it appears on the interrupt line of the adapter card.
+
+   -- Static - Interrupt moderation is applied on the adapter card. 
+      All transmit and receive interrupts are queued until a complete
+      moderation interval ends. If such a moderation interval ends, all
+      queued interrupts are processed in one big bunch without any delay.
+      The term 'static' reflects the fact, that interrupt moderation is
+      always enabled, regardless how much network load is currently 
+      passing via a particular interface. In addition, the duration of
+      the moderation interval has a fixed length that never changes while
+      the driver is operational.
+
+   -- Dynamic - Interrupt moderation might be applied on the adapter card,
+      depending on the load of the system. If the driver detects that the
+      system load is too high, the driver tries to shield the system against 
+      too much network load by enabling interrupt moderation. If - at a later
+      time - the CPU utilization decreases again (or if the network load is 
+      negligible) the interrupt moderation will automatically be disabled.
+
+Interrupt moderation should be used when the driver has to handle one or more
+interfaces with a high network load, which - as a consequence - leads also to a
+high CPU utilization. When moderation is applied in such high network load 
+situations, CPU load might be reduced by 20-30%.
+
+NOTE: The drawback of using interrupt moderation is an increase of the round-
+trip-time (RTT), due to the queueing and serving of interrupts at dedicated
+moderation times.
+
+Interrupts per second
+---------------------
+Parameter:    IntsPerSec
+Values:       30...40000 (interrupts per second)
+Default:      2000
+
+This parameter is only used if either static or dynamic interrupt moderation
+is used on a network adapter card. Using this parameter if no moderation is
+applied will lead to no action performed.
+
+This parameter determines the length of any interrupt moderation interval. 
+Assuming that static interrupt moderation is to be used, an 'IntsPerSec' 
+parameter value of 2000 will lead to an interrupt moderation interval of
+500 microseconds. 
+
+NOTE: The duration of the moderation interval is to be chosen with care.
+At first glance, selecting a very long duration (e.g. only 100 interrupts per 
+second) seems to be meaningful, but the increase of packet-processing delay 
+is tremendous. On the other hand, selecting a very short moderation time might
+compensate the use of any moderation being applied.
+
+
+Preferred Port
+--------------
+Parameter:    PrefPort
+Values:       A, B
+Default:      A
+
+This is used to force the preferred port to A or B (on dual-port network 
+adapters). The preferred port is the one that is used if both are detected
+as fully functional.
+
+RLMT Mode (Redundant Link Management Technology)
+------------------------------------------------
+Parameter:    RlmtMode
+Values:       CheckLinkState,CheckLocalPort, CheckSeg, DualNet
+Default:      CheckLinkState
+
+RLMT monitors the status of the port. If the link of the active port 
+fails, RLMT switches immediately to the standby link. The virtual link is 
+maintained as long as at least one 'physical' link is up. 
+
+Possible modes:
+
+   -- CheckLinkState - Check link state only: RLMT uses the link state
+      reported by the adapter hardware for each individual port to 
+      determine whether a port can be used for all network traffic or 
+      not.
+
+   -- CheckLocalPort - In this mode, RLMT monitors the network path 
+      between the two ports of an adapter by regularly exchanging packets
+      between them. This mode requires a network configuration in which 
+      the two ports are able to "see" each other (i.e. there must not be 
+      any router between the ports).
+
+   -- CheckSeg - Check local port and segmentation: This mode supports the
+      same functions as the CheckLocalPort mode and additionally checks 
+      network segmentation between the ports. Therefore, this mode is only
+      to be used if Gigabit Ethernet switches are installed on the network
+      that have been configured to use the Spanning Tree protocol. 
+
+   -- DualNet - In this mode, ports A and B are used as separate devices. 
+      If you have a dual port adapter, port A will be configured as eth0 
+      and port B as eth1. Both ports can be used independently with 
+      distinct IP addresses. The preferred port setting is not used. 
+      RLMT is turned off.
+   
+NOTE: RLMT modes CLP and CLPSS are designed to operate in configurations 
+      where a network path between the ports on one adapter exists. 
+      Moreover, they are not designed to work where adapters are connected
+      back-to-back.
+***
+
+
+5  Large Frame Support
+======================
+
+The driver supports large frames (also called jumbo frames). Using large 
+frames can result in an improved throughput if transferring large amounts 
+of data.
+To enable large frames, set the MTU (maximum transfer unit) of the 
+interface to the desired value (up to 9000), execute the following 
+command:
+      ifconfig eth0 mtu 9000
+This will only work if you have two adapters connected back-to-back
+or if you use a switch that supports large frames. When using a switch, 
+it should be configured to allow large frames and auto-negotiation should  
+be set to OFF. The setting must be configured on all adapters that can be 
+reached by the large frames. If one adapter is not set to receive large 
+frames, it will simply drop them.
+
+You can switch back to the standard ethernet frame size by executing the 
+following command:
+      ifconfig eth0 mtu 1500
+
+To permanently configure this setting, add a script with the 'ifconfig' 
+line to the system startup sequence (named something like "S99sk98lin" 
+in /etc/rc.d/rc2.d).
+***
+
+
+6  VLAN and Link Aggregation Support (IEEE 802.1, 802.1q, 802.3ad)
+==================================================================
+
+The Marvell Yukon/SysKonnect Linux drivers are able to support VLAN and 
+Link Aggregation according to IEEE standards 802.1, 802.1q, and 802.3ad. 
+These features are only available after installation of open source 
+modules available on the Internet:
+For VLAN go to: http://www.candelatech.com/~greear/vlan.html
+For Link Aggregation go to: http://www.st.rim.or.jp/~yumo
+
+NOTE: SysKonnect GmbH does not offer any support for these open source 
+      modules and does not take the responsibility for any kind of 
+      failures or problems arising in connection with these modules.
+
+NOTE: Configuring Link Aggregation on a SysKonnect dual link adapter may 
+      cause problems when unloading the driver.
+
+
+7  Troubleshooting
+==================
+
+If any problems occur during the installation process, check the 
+following list:
+
+
+Problem:  The SK-98xx adapter cannot be found by the driver.
+Solution: In /proc/pci search for the following entry:
+             'Ethernet controller: SysKonnect SK-98xx ...'
+          If this entry exists, the SK-98xx or SK-98xx V2.0 adapter has 
+          been found by the system and should be operational.
+          If this entry does not exist or if the file '/proc/pci' is not 
+          found, there may be a hardware problem or the PCI support may 
+          not be enabled in your kernel.
+          The adapter can be checked using the diagnostics program which 
+          is available on the SysKonnect web site:
+          www.syskonnect.com
+          
+          Some COMPAQ machines have problems dealing with PCI under Linux.
+          This problem is described in the 'PCI howto' document
+          (included in some distributions or available from the
+          web, e.g. at 'www.linux.org'). 
+
+
+Problem:  Programs such as 'ifconfig' or 'route' cannot be found or the 
+          error message 'Operation not permitted' is displayed.
+Reason:   You are not logged in as user 'root'.
+Solution: Logout and login as 'root' or change to 'root' via 'su'.
+
+
+Problem:  Upon use of the command 'ping <address>' the message
+          "ping: sendto: Network is unreachable" is displayed.
+Reason:   Your route is not set correctly.
+Solution: If you are using RedHat, you probably forgot to set up the 
+          route in the 'network configuration'.
+          Check the existing routes with the 'route' command and check 
+          if an entry for 'eth0' exists, and if so, if it is set correctly.
+
+
+Problem:  The driver can be started, the adapter is connected to the 
+          network, but you cannot receive or transmit any packets; 
+          e.g. 'ping' does not work.
+Reason:   There is an incorrect route in your routing table.
+Solution: Check the routing table with the command 'route' and read the 
+          manual help pages dealing with routes (enter 'man route').
+
+NOTE: Although the 2.2.x kernel versions generate the routing entry 
+      automatically, problems of this kind may occur here as well. We've 
+      come across a situation in which the driver started correctly at 
+      system start, but after the driver has been removed and reloaded,
+      the route of the adapter's network pointed to the 'dummy0'device 
+      and had to be corrected manually.
+
+
+Problem:  Your computer should act as a router between multiple 
+          IP subnetworks (using multiple adapters), but computers in 
+          other subnetworks cannot be reached.
+Reason:   Either the router's kernel is not configured for IP forwarding 
+          or the routing table and gateway configuration of at least one 
+          computer is not working.
+
+Problem:  Upon driver start, the following error message is displayed:
+          "eth0: -- ERROR --
+          Class: internal Software error
+          Nr:    0xcc
+          Msg:   SkGeInitPort() cannot init running ports"
+Reason:   You are using a driver compiled for single processor machines 
+          on a multiprocessor machine with SMP (Symmetric MultiProcessor) 
+          kernel.
+Solution: Configure your kernel appropriately and recompile the kernel or
+          the modules.
+
+
+
+If your problem is not listed here, please contact SysKonnect's technical
+support for help (linux@syskonnect.de).
+When contacting our technical support, please ensure that the following 
+information is available:
+- System Manufacturer and HW Informations (CPU, Memory... )
+- PCI-Boards in your system
+- Distribution
+- Kernel version
+- Driver version
+***
+
+
+
+***End of Readme File***
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 5b9e17b..c5519250e 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -2177,7 +2177,7 @@
 	  with better performance and more complete ethtool support.
 
 	  It does not support the link failover and network management 
-	  features available in the hardware.
+	  features that "portable" vendor supplied sk98lin driver does.
 
 	  This driver supports adapters based on the original Yukon chipset:
 	  Marvell 88E8001, Belkin F5D5005, CNet GigaCard, DLink DGE-530T,
@@ -2215,6 +2215,93 @@
 
 	 If unsure, say N.
 
+config SK98LIN
+	tristate "Marvell Yukon Chipset / SysKonnect SK-98xx Support (DEPRECATED)"
+	depends on PCI
+	---help---
+	  Say Y here if you have a Marvell Yukon or SysKonnect SK-98xx/SK-95xx
+	  compliant Gigabit Ethernet Adapter.
+
+	  This driver supports the original Yukon chipset. This driver is
+	  deprecated and will be removed from the kernel in the near future,
+	  it has been replaced by the skge driver. skge is cleaner and
+	  seems to work better.
+
+	  This driver does not support the newer Yukon2 chipset. A separate
+	  driver, sky2, is provided to support Yukon2-based adapters.
+
+	  The following adapters are supported by this driver:
+	    - 3Com 3C940 Gigabit LOM Ethernet Adapter
+	    - 3Com 3C941 Gigabit LOM Ethernet Adapter
+	    - Allied Telesyn AT-2970LX Gigabit Ethernet Adapter
+	    - Allied Telesyn AT-2970LX/2SC Gigabit Ethernet Adapter
+	    - Allied Telesyn AT-2970SX Gigabit Ethernet Adapter
+	    - Allied Telesyn AT-2970SX/2SC Gigabit Ethernet Adapter
+	    - Allied Telesyn AT-2970TX Gigabit Ethernet Adapter
+	    - Allied Telesyn AT-2970TX/2TX Gigabit Ethernet Adapter
+	    - Allied Telesyn AT-2971SX Gigabit Ethernet Adapter
+	    - Allied Telesyn AT-2971T Gigabit Ethernet Adapter
+	    - Belkin Gigabit Desktop Card 10/100/1000Base-T Adapter, Copper RJ-45
+	    - EG1032 v2 Instant Gigabit Network Adapter
+	    - EG1064 v2 Instant Gigabit Network Adapter
+	    - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Abit)
+	    - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Albatron)
+	    - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Asus)
+	    - Marvell 88E8001 Gigabit LOM Ethernet Adapter (ECS)
+	    - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Epox)
+	    - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Foxconn)
+	    - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Gigabyte)
+	    - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Iwill)
+	    - Marvell 88E8050 Gigabit LOM Ethernet Adapter (Intel)
+	    - Marvell RDK-8001 Adapter
+	    - Marvell RDK-8002 Adapter
+	    - Marvell RDK-8003 Adapter
+	    - Marvell RDK-8004 Adapter
+	    - Marvell RDK-8006 Adapter
+	    - Marvell RDK-8007 Adapter
+	    - Marvell RDK-8008 Adapter
+	    - Marvell RDK-8009 Adapter
+	    - Marvell RDK-8010 Adapter
+	    - Marvell RDK-8011 Adapter
+	    - Marvell RDK-8012 Adapter
+	    - Marvell RDK-8052 Adapter
+	    - Marvell Yukon Gigabit Ethernet 10/100/1000Base-T Adapter (32 bit)
+	    - Marvell Yukon Gigabit Ethernet 10/100/1000Base-T Adapter (64 bit)
+	    - N-Way PCI-Bus Giga-Card 1000/100/10Mbps(L)
+	    - SK-9521 10/100/1000Base-T Adapter
+	    - SK-9521 V2.0 10/100/1000Base-T Adapter
+	    - SK-9821 Gigabit Ethernet Server Adapter (SK-NET GE-T)
+	    - SK-9821 V2.0 Gigabit Ethernet 10/100/1000Base-T Adapter
+	    - SK-9822 Gigabit Ethernet Server Adapter (SK-NET GE-T dual link)
+	    - SK-9841 Gigabit Ethernet Server Adapter (SK-NET GE-LX)
+	    - SK-9841 V2.0 Gigabit Ethernet 1000Base-LX Adapter
+	    - SK-9842 Gigabit Ethernet Server Adapter (SK-NET GE-LX dual link)
+	    - SK-9843 Gigabit Ethernet Server Adapter (SK-NET GE-SX)
+	    - SK-9843 V2.0 Gigabit Ethernet 1000Base-SX Adapter
+	    - SK-9844 Gigabit Ethernet Server Adapter (SK-NET GE-SX dual link)
+	    - SK-9851 V2.0 Gigabit Ethernet 1000Base-SX Adapter
+	    - SK-9861 Gigabit Ethernet Server Adapter (SK-NET GE-SX Volition)
+	    - SK-9861 V2.0 Gigabit Ethernet 1000Base-SX Adapter
+	    - SK-9862 Gigabit Ethernet Server Adapter (SK-NET GE-SX Volition dual link)
+	    - SK-9871 Gigabit Ethernet Server Adapter (SK-NET GE-ZX)
+	    - SK-9871 V2.0 Gigabit Ethernet 1000Base-ZX Adapter
+	    - SK-9872 Gigabit Ethernet Server Adapter (SK-NET GE-ZX dual link)
+	    - SMC EZ Card 1000 (SMC9452TXV.2)
+	  
+	  The adapters support Jumbo Frames.
+	  The dual link adapters support link-failover and dual port features.
+	  Both Marvell Yukon and SysKonnect SK-98xx/SK-95xx adapters support 
+	  the scatter-gather functionality with sendfile(). Please refer to 
+	  <file:Documentation/networking/sk98lin.txt> for more information about
+	  optional driver parameters.
+	  Questions concerning this driver may be addressed to:
+	      <linux@syskonnect.de>
+	  
+	  If you want to compile this driver as a module ( = code which can be
+	  inserted in and removed from the running kernel whenever you want),
+	  say M here and read <file:Documentation/kbuild/modules.txt>. The module will
+	  be called sk98lin. This is recommended.
+
 config VIA_VELOCITY
 	tristate "VIA Velocity support"
 	depends on PCI
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index e684212..9c928a8 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -66,6 +66,7 @@
 obj-$(CONFIG_TC35815) += tc35815.o
 obj-$(CONFIG_SKGE) += skge.o
 obj-$(CONFIG_SKY2) += sky2.o
+obj-$(CONFIG_SK98LIN) += sk98lin/
 obj-$(CONFIG_SKFP) += skfp/
 obj-$(CONFIG_VIA_RHINE) += via-rhine.o
 obj-$(CONFIG_VIA_VELOCITY) += via-velocity.o
diff --git a/drivers/net/sk98lin/Makefile b/drivers/net/sk98lin/Makefile
new file mode 100644
index 0000000..afd900d
--- /dev/null
+++ b/drivers/net/sk98lin/Makefile
@@ -0,0 +1,87 @@
+#
+# Makefile for the SysKonnect SK-98xx device driver.
+#
+
+
+#
+# Standalone driver params
+# SKPARAM += -DSK_KERNEL_24
+# SKPARAM += -DSK_KERNEL_24_26
+# SKPARAM += -DSK_KERNEL_26
+# SKPARAM += -DSK_KERNEL_22_24
+
+obj-$(CONFIG_SK98LIN) += sk98lin.o
+sk98lin-objs    :=	\
+		skge.o		\
+		skethtool.o	\
+		skdim.o		\
+		skaddr.o	\
+		skgehwt.o	\
+		skgeinit.o	\
+		skgepnmi.o	\
+		skgesirq.o	\
+		ski2c.o		\
+		sklm80.o	\
+		skqueue.o	\
+		skrlmt.o	\
+		sktimer.o	\
+		skvpd.o		\
+		skxmac2.o
+
+# DBGDEF =  \
+# -DDEBUG
+
+ifdef DEBUG
+DBGDEF +=  \
+-DSK_DEBUG_CHKMOD=0x00000000L \
+-DSK_DEBUG_CHKCAT=0x00000000L
+endif
+
+
+# **** possible debug modules for SK_DEBUG_CHKMOD *****************
+# SK_DBGMOD_MERR        0x00000001L     /* general module error indication */
+# SK_DBGMOD_HWM         0x00000002L     /* Hardware init module */
+# SK_DBGMOD_RLMT        0x00000004L     /* RLMT module */
+# SK_DBGMOD_VPD         0x00000008L     /* VPD module */
+# SK_DBGMOD_I2C         0x00000010L     /* I2C module */
+# SK_DBGMOD_PNMI        0x00000020L     /* PNMI module */
+# SK_DBGMOD_CSUM        0x00000040L     /* CSUM module */
+# SK_DBGMOD_ADDR        0x00000080L     /* ADDR module */
+# SK_DBGMOD_DRV         0x00010000L     /* DRV module */
+
+# **** possible debug categories for SK_DEBUG_CHKCAT **************
+# *** common modules ***
+# SK_DBGCAT_INIT        0x00000001L     module/driver initialization
+# SK_DBGCAT_CTRL        0x00000002L     controlling: add/rmv MCA/MAC and other controls (IOCTL)
+# SK_DBGCAT_ERR         0x00000004L     error handling paths
+# SK_DBGCAT_TX          0x00000008L     transmit path
+# SK_DBGCAT_RX          0x00000010L     receive path
+# SK_DBGCAT_IRQ         0x00000020L     general IRQ handling
+# SK_DBGCAT_QUEUE       0x00000040L     any queue management
+# SK_DBGCAT_DUMP        0x00000080L     large data output e.g. hex dump
+# SK_DBGCAT_FATAL       0x00000100L     large data output e.g. hex dump
+
+# *** driver (file skge.c) ***
+# SK_DBGCAT_DRV_ENTRY           0x00010000      entry points
+# SK_DBGCAT_DRV_???             0x00020000      not used
+# SK_DBGCAT_DRV_MCA             0x00040000      multicast
+# SK_DBGCAT_DRV_TX_PROGRESS     0x00080000      tx path
+# SK_DBGCAT_DRV_RX_PROGRESS     0x00100000      rx path
+# SK_DBGCAT_DRV_PROGRESS        0x00200000      general runtime
+# SK_DBGCAT_DRV_???             0x00400000      not used
+# SK_DBGCAT_DRV_PROM            0x00800000      promiscuous mode
+# SK_DBGCAT_DRV_TX_FRAME        0x01000000      display tx frames
+# SK_DBGCAT_DRV_ERROR           0x02000000      error conditions
+# SK_DBGCAT_DRV_INT_SRC         0x04000000      interrupts sources
+# SK_DBGCAT_DRV_EVENT           0x08000000      driver events
+
+EXTRA_CFLAGS += -Idrivers/net/sk98lin -DSK_DIAG_SUPPORT -DGENESIS -DYUKON $(DBGDEF) $(SKPARAM)
+
+clean:
+	rm -f core *.o *.a *.s
+
+
+
+
+
+
diff --git a/drivers/net/sk98lin/h/lm80.h b/drivers/net/sk98lin/h/lm80.h
new file mode 100644
index 0000000..4e2dbbf
--- /dev/null
+++ b/drivers/net/sk98lin/h/lm80.h
@@ -0,0 +1,179 @@
+/******************************************************************************
+ *
+ * Name:	lm80.h	
+ * Project:	Gigabit Ethernet Adapters, Common Modules
+ * Version:	$Revision: 1.6 $
+ * Date:	$Date: 2003/05/13 17:26:52 $
+ * Purpose:	Contains all defines for the LM80 Chip
+ *		(National Semiconductor).
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *	(C)Copyright 1998-2002 SysKonnect.
+ *	(C)Copyright 2002-2003 Marvell.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+#ifndef __INC_LM80_H
+#define __INC_LM80_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif	/* __cplusplus */
+
+/* defines ********************************************************************/
+
+/*
+ * LM80 register definition
+ *
+ * All registers are 8 bit wide
+ */
+#define LM80_CFG			0x00	/* Configuration Register */
+#define LM80_ISRC_1			0x01	/* Interrupt Status Register 1 */
+#define LM80_ISRC_2			0x02	/* Interrupt Status Register 2 */
+#define LM80_IMSK_1			0x03	/* Interrupt Mask Register 1 */
+#define LM80_IMSK_2			0x04	/* Interrupt Mask Register 2 */
+#define LM80_FAN_CTRL		0x05	/* Fan Devisor/RST#/OS# Register */
+#define LM80_TEMP_CTRL		0x06	/* OS# Config, Temp Res. Reg */
+	/* 0x07 - 0x1f reserved	*/
+	/* current values */
+#define LM80_VT0_IN			0x20	/* current Voltage 0 value */
+#define LM80_VT1_IN			0x21	/* current Voltage 1 value */
+#define LM80_VT2_IN			0x22	/* current Voltage 2 value */
+#define LM80_VT3_IN			0x23	/* current Voltage 3 value */
+#define LM80_VT4_IN			0x24	/* current Voltage 4 value */
+#define LM80_VT5_IN			0x25	/* current Voltage 5 value */
+#define LM80_VT6_IN			0x26	/* current Voltage 6 value */
+#define LM80_TEMP_IN		0x27	/* current Temperature value */
+#define LM80_FAN1_IN		0x28	/* current Fan 1 count */
+#define LM80_FAN2_IN		0x29	/* current Fan 2 count */
+	/* limit values */
+#define LM80_VT0_HIGH_LIM	0x2a	/* high limit val for Voltage 0 */
+#define LM80_VT0_LOW_LIM	0x2b	/* low limit val for Voltage 0 */
+#define LM80_VT1_HIGH_LIM	0x2c	/* high limit val for Voltage 1 */
+#define LM80_VT1_LOW_LIM	0x2d	/* low limit val for Voltage 1 */
+#define LM80_VT2_HIGH_LIM	0x2e	/* high limit val for Voltage 2 */
+#define LM80_VT2_LOW_LIM	0x2f	/* low limit val for Voltage 2 */
+#define LM80_VT3_HIGH_LIM	0x30	/* high limit val for Voltage 3 */
+#define LM80_VT3_LOW_LIM	0x31	/* low limit val for Voltage 3 */
+#define LM80_VT4_HIGH_LIM	0x32	/* high limit val for Voltage 4 */
+#define LM80_VT4_LOW_LIM	0x33	/* low limit val for Voltage 4 */
+#define LM80_VT5_HIGH_LIM	0x34	/* high limit val for Voltage 5 */
+#define LM80_VT5_LOW_LIM	0x35	/* low limit val for Voltage 5 */
+#define LM80_VT6_HIGH_LIM	0x36	/* high limit val for Voltage 6 */
+#define LM80_VT6_LOW_LIM	0x37	/* low limit val for Voltage 6 */
+#define LM80_THOT_LIM_UP	0x38	/* hot temperature limit (high) */
+#define LM80_THOT_LIM_LO	0x39	/* hot temperature limit (low) */
+#define LM80_TOS_LIM_UP		0x3a	/* OS temperature limit (high) */
+#define LM80_TOS_LIM_LO		0x3b	/* OS temperature limit (low) */
+#define LM80_FAN1_COUNT_LIM	0x3c	/* Fan 1 count limit (high) */
+#define LM80_FAN2_COUNT_LIM	0x3d	/* Fan 2 count limit (low) */
+	/* 0x3e - 0x3f reserved	*/
+
+/*
+ * LM80 bit definitions
+ */
+
+/*	LM80_CFG		Configuration Register */
+#define LM80_CFG_START		(1<<0)	/* start monitoring operation */
+#define LM80_CFG_INT_ENA	(1<<1)	/* enables the INT# Interrupt output */
+#define LM80_CFG_INT_POL	(1<<2)	/* INT# pol: 0 act low, 1 act high */
+#define LM80_CFG_INT_CLR	(1<<3)	/* disables INT#/RST_OUT#/OS# outputs */
+#define LM80_CFG_RESET		(1<<4)	/* signals a reset */
+#define LM80_CFG_CHASS_CLR	(1<<5)	/* clears Chassis Intrusion (CI) pin */
+#define LM80_CFG_GPO		(1<<6)	/* drives the GPO# pin */
+#define LM80_CFG_INIT		(1<<7)	/* restore power on defaults */
+
+/*	LM80_ISRC_1		Interrupt Status Register 1 */
+/*	LM80_IMSK_1		Interrupt Mask Register 1 */
+#define LM80_IS_VT0			(1<<0)	/* limit exceeded for Voltage 0 */
+#define LM80_IS_VT1			(1<<1)	/* limit exceeded for Voltage 1 */
+#define LM80_IS_VT2			(1<<2)	/* limit exceeded for Voltage 2 */
+#define LM80_IS_VT3			(1<<3)	/* limit exceeded for Voltage 3 */
+#define LM80_IS_VT4			(1<<4)	/* limit exceeded for Voltage 4 */
+#define LM80_IS_VT5			(1<<5)	/* limit exceeded for Voltage 5 */
+#define LM80_IS_VT6			(1<<6)	/* limit exceeded for Voltage 6 */
+#define LM80_IS_INT_IN		(1<<7)	/* state of INT_IN# */
+
+/*	LM80_ISRC_2		Interrupt Status Register 2 */
+/*	LM80_IMSK_2		Interrupt Mask Register 2 */
+#define LM80_IS_TEMP		(1<<0)	/* HOT temperature limit exceeded */
+#define LM80_IS_BTI			(1<<1)	/* state of BTI# pin */
+#define LM80_IS_FAN1		(1<<2)	/* count limit exceeded for Fan 1 */
+#define LM80_IS_FAN2		(1<<3)	/* count limit exceeded for Fan 2 */
+#define LM80_IS_CI			(1<<4)	/* Chassis Intrusion occured */
+#define LM80_IS_OS			(1<<5)	/* OS temperature limit exceeded */
+	/* bit 6 and 7 are reserved in LM80_ISRC_2 */
+#define LM80_IS_HT_IRQ_MD	(1<<6)	/* Hot temperature interrupt mode */
+#define LM80_IS_OT_IRQ_MD	(1<<7)	/* OS temperature interrupt mode */
+
+/*	LM80_FAN_CTRL		Fan Devisor/RST#/OS# Register */
+#define LM80_FAN1_MD_SEL	(1<<0)	/* Fan 1 mode select */
+#define LM80_FAN2_MD_SEL	(1<<1)	/* Fan 2 mode select */
+#define LM80_FAN1_PRM_CTL	(3<<2)	/* Fan 1 speed control */
+#define LM80_FAN2_PRM_CTL	(3<<4)	/* Fan 2 speed control */
+#define LM80_FAN_OS_ENA		(1<<6)	/* enable OS mode on RST_OUT#/OS# pins*/
+#define LM80_FAN_RST_ENA	(1<<7)	/* sets RST_OUT#/OS# pins in RST mode */
+
+/*	LM80_TEMP_CTRL		OS# Config, Temp Res. Reg */
+#define LM80_TEMP_OS_STAT	(1<<0)	/* mirrors the state of RST_OUT#/OS# */
+#define LM80_TEMP_OS_POL	(1<<1)	/* select OS# polarity */
+#define LM80_TEMP_OS_MODE	(1<<2)	/* selects Interrupt mode */
+#define LM80_TEMP_RES		(1<<3)	/* selects 9 or 11 bit temp resulution*/
+#define LM80_TEMP_LSB		(0xf<<4)/* 4 LSBs of 11 bit temp data */
+#define LM80_TEMP_LSB_9		(1<<7)	/* LSB of 9 bit temperature data */
+
+	/* 0x07 - 0x1f reserved	*/
+/*	LM80_VT0_IN		current Voltage 0 value */
+/*	LM80_VT1_IN		current Voltage 1 value */
+/*	LM80_VT2_IN		current Voltage 2 value */
+/*	LM80_VT3_IN		current Voltage 3 value */
+/*	LM80_VT4_IN		current Voltage 4 value */
+/*	LM80_VT5_IN		current Voltage 5 value */
+/*	LM80_VT6_IN		current Voltage 6 value */
+/*	LM80_TEMP_IN		current temperature value */
+/*	LM80_FAN1_IN		current Fan 1 count */
+/*	LM80_FAN2_IN		current Fan 2 count */
+/*	LM80_VT0_HIGH_LIM	high limit val for Voltage 0 */
+/*	LM80_VT0_LOW_LIM	low limit val for Voltage 0 */
+/*	LM80_VT1_HIGH_LIM	high limit val for Voltage 1 */
+/*	LM80_VT1_LOW_LIM	low limit val for Voltage 1 */
+/*	LM80_VT2_HIGH_LIM	high limit val for Voltage 2 */
+/*	LM80_VT2_LOW_LIM	low limit val for Voltage 2 */
+/*	LM80_VT3_HIGH_LIM	high limit val for Voltage 3 */
+/*	LM80_VT3_LOW_LIM	low limit val for Voltage 3 */
+/*	LM80_VT4_HIGH_LIM	high limit val for Voltage 4 */
+/*	LM80_VT4_LOW_LIM	low limit val for Voltage 4 */
+/*	LM80_VT5_HIGH_LIM	high limit val for Voltage 5 */
+/*	LM80_VT5_LOW_LIM	low limit val for Voltage 5 */
+/*	LM80_VT6_HIGH_LIM	high limit val for Voltage 6 */
+/*	LM80_VT6_LOW_LIM	low limit val for Voltage 6 */
+/*	LM80_THOT_LIM_UP	hot temperature limit (high) */
+/*	LM80_THOT_LIM_LO	hot temperature limit (low) */
+/*	LM80_TOS_LIM_UP		OS temperature limit (high) */
+/*	LM80_TOS_LIM_LO		OS temperature limit (low) */
+/*	LM80_FAN1_COUNT_LIM	Fan 1 count limit (high) */
+/*	LM80_FAN2_COUNT_LIM	Fan 2 count limit (low) */
+	/* 0x3e - 0x3f reserved	*/
+
+#define LM80_ADDR		0x28	/* LM80 default addr */
+
+/* typedefs *******************************************************************/
+
+
+/* function prototypes ********************************************************/
+
+#ifdef __cplusplus
+}
+#endif	/* __cplusplus */
+
+#endif	/* __INC_LM80_H */
diff --git a/drivers/net/sk98lin/h/skaddr.h b/drivers/net/sk98lin/h/skaddr.h
new file mode 100644
index 0000000..423ad06
--- /dev/null
+++ b/drivers/net/sk98lin/h/skaddr.h
@@ -0,0 +1,285 @@
+/******************************************************************************
+ *
+ * Name:	skaddr.h
+ * Project:	Gigabit Ethernet Adapters, ADDR-Modul
+ * Version:	$Revision: 1.29 $
+ * Date:	$Date: 2003/05/13 16:57:24 $
+ * Purpose:	Header file for Address Management (MC, UC, Prom).
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *	(C)Copyright 1998-2002 SysKonnect GmbH.
+ *	(C)Copyright 2002-2003 Marvell.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * Description:
+ *
+ * This module is intended to manage multicast addresses and promiscuous mode
+ * on GEnesis adapters.
+ *
+ * Include File Hierarchy:
+ *
+ *	"skdrv1st.h"
+ *	...
+ *	"sktypes.h"
+ *	"skqueue.h"
+ *	"skaddr.h"
+ *	...
+ *	"skdrv2nd.h"
+ *
+ ******************************************************************************/
+
+#ifndef __INC_SKADDR_H
+#define __INC_SKADDR_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif	/* cplusplus */
+
+/* defines ********************************************************************/
+
+#define SK_MAC_ADDR_LEN				6	/* Length of MAC address. */
+#define	SK_MAX_ADDRS				14	/* #Addrs for exact match. */
+
+/* ----- Common return values ----- */
+
+#define SK_ADDR_SUCCESS				0	/* Function returned successfully. */
+#define SK_ADDR_ILLEGAL_PORT			100	/* Port number too high. */
+#define SK_ADDR_TOO_EARLY			101	/* Function called too early. */
+
+/* ----- Clear/Add flag bits ----- */
+
+#define SK_ADDR_PERMANENT			1	/* RLMT Address */
+
+/* ----- Additional Clear flag bits ----- */
+
+#define SK_MC_SW_ONLY				2	/* Do not update HW when clearing. */
+
+/* ----- Override flag bits ----- */
+
+#define SK_ADDR_LOGICAL_ADDRESS		0
+#define SK_ADDR_VIRTUAL_ADDRESS		(SK_ADDR_LOGICAL_ADDRESS)	/* old */
+#define SK_ADDR_PHYSICAL_ADDRESS	1
+#define SK_ADDR_CLEAR_LOGICAL		2
+#define SK_ADDR_SET_LOGICAL			4
+
+/* ----- Override return values ----- */
+
+#define SK_ADDR_OVERRIDE_SUCCESS	(SK_ADDR_SUCCESS)
+#define SK_ADDR_DUPLICATE_ADDRESS	1
+#define SK_ADDR_MULTICAST_ADDRESS	2
+
+/* ----- Partitioning of excact match table ----- */
+
+#define SK_ADDR_EXACT_MATCHES		16	/* #Exact match entries. */
+
+#define SK_ADDR_FIRST_MATCH_RLMT	1
+#define SK_ADDR_LAST_MATCH_RLMT		2
+#define SK_ADDR_FIRST_MATCH_DRV		3
+#define SK_ADDR_LAST_MATCH_DRV		(SK_ADDR_EXACT_MATCHES - 1)
+
+/* ----- SkAddrMcAdd/SkAddrMcUpdate return values ----- */
+
+#define SK_MC_FILTERING_EXACT		0	/* Exact filtering. */
+#define SK_MC_FILTERING_INEXACT		1	/* Inexact filtering. */
+
+/* ----- Additional SkAddrMcAdd return values ----- */
+
+#define SK_MC_ILLEGAL_ADDRESS		2	/* Illegal address. */
+#define SK_MC_ILLEGAL_PORT			3	/* Illegal port (not the active one). */
+#define SK_MC_RLMT_OVERFLOW			4	/* Too many RLMT mc addresses. */
+
+/* Promiscuous mode bits ----- */
+
+#define SK_PROM_MODE_NONE			0	/* Normal receive. */
+#define SK_PROM_MODE_LLC			1	/* Receive all LLC frames. */
+#define SK_PROM_MODE_ALL_MC			2	/* Receive all multicast frames. */
+/* #define SK_PROM_MODE_NON_LLC		4 */	/* Receive all non-LLC frames. */
+
+/* Macros */
+
+#ifdef OLD_STUFF
+#ifndef SK_ADDR_EQUAL
+/*
+ * "&" instead of "&&" allows better optimization on IA-64.
+ * The replacement is safe here, as all bytes exist.
+ */
+#ifndef SK_ADDR_DWORD_COMPARE
+#define SK_ADDR_EQUAL(A1,A2)	( \
+	(((SK_U8 *)(A1))[5] == ((SK_U8 *)(A2))[5]) & \
+	(((SK_U8 *)(A1))[4] == ((SK_U8 *)(A2))[4]) & \
+	(((SK_U8 *)(A1))[3] == ((SK_U8 *)(A2))[3]) & \
+	(((SK_U8 *)(A1))[2] == ((SK_U8 *)(A2))[2]) & \
+	(((SK_U8 *)(A1))[1] == ((SK_U8 *)(A2))[1]) & \
+	(((SK_U8 *)(A1))[0] == ((SK_U8 *)(A2))[0]))
+#else	/* SK_ADDR_DWORD_COMPARE */
+#define SK_ADDR_EQUAL(A1,A2)	( \
+	(*(SK_U32 *)&(((SK_U8 *)(A1))[2]) == *(SK_U32 *)&(((SK_U8 *)(A2))[2])) & \
+	(*(SK_U32 *)&(((SK_U8 *)(A1))[0]) == *(SK_U32 *)&(((SK_U8 *)(A2))[0])))
+#endif	/* SK_ADDR_DWORD_COMPARE */
+#endif	/* SK_ADDR_EQUAL */
+#endif /* 0 */
+
+#ifndef SK_ADDR_EQUAL
+#ifndef SK_ADDR_DWORD_COMPARE
+#define SK_ADDR_EQUAL(A1,A2)	( \
+	(((SK_U8 SK_FAR *)(A1))[5] == ((SK_U8 SK_FAR *)(A2))[5]) & \
+	(((SK_U8 SK_FAR *)(A1))[4] == ((SK_U8 SK_FAR *)(A2))[4]) & \
+	(((SK_U8 SK_FAR *)(A1))[3] == ((SK_U8 SK_FAR *)(A2))[3]) & \
+	(((SK_U8 SK_FAR *)(A1))[2] == ((SK_U8 SK_FAR *)(A2))[2]) & \
+	(((SK_U8 SK_FAR *)(A1))[1] == ((SK_U8 SK_FAR *)(A2))[1]) & \
+	(((SK_U8 SK_FAR *)(A1))[0] == ((SK_U8 SK_FAR *)(A2))[0]))
+#else	/* SK_ADDR_DWORD_COMPARE */
+#define SK_ADDR_EQUAL(A1,A2)	( \
+	(*(SK_U16 SK_FAR *)&(((SK_U8 SK_FAR *)(A1))[4]) == \
+	*(SK_U16 SK_FAR *)&(((SK_U8 SK_FAR *)(A2))[4])) && \
+	(*(SK_U32 SK_FAR *)&(((SK_U8 SK_FAR *)(A1))[0]) == \
+	*(SK_U32 SK_FAR *)&(((SK_U8 SK_FAR *)(A2))[0])))
+#endif	/* SK_ADDR_DWORD_COMPARE */
+#endif	/* SK_ADDR_EQUAL */
+
+/* typedefs *******************************************************************/
+
+typedef struct s_MacAddr {
+	SK_U8	a[SK_MAC_ADDR_LEN];
+} SK_MAC_ADDR;
+
+
+/* SK_FILTER is used to ensure alignment of the filter. */
+typedef union s_InexactFilter {
+	SK_U8	Bytes[8];
+	SK_U64	Val;	/* Dummy entry for alignment only. */
+} SK_FILTER64;
+
+
+typedef struct s_AddrNet SK_ADDR_NET;
+
+
+typedef struct s_AddrPort {
+
+/* ----- Public part (read-only) ----- */
+
+	SK_MAC_ADDR	CurrentMacAddress;	/* Current physical MAC Address. */
+	SK_MAC_ADDR	PermanentMacAddress;	/* Permanent physical MAC Address. */
+	int		PromMode;		/* Promiscuous Mode. */
+
+/* ----- Private part ----- */
+
+	SK_MAC_ADDR	PreviousMacAddress;	/* Prev. phys. MAC Address. */
+	SK_BOOL		CurrentMacAddressSet;	/* CurrentMacAddress is set. */
+	SK_U8		Align01;
+
+	SK_U32		FirstExactMatchRlmt;
+	SK_U32		NextExactMatchRlmt;
+	SK_U32		FirstExactMatchDrv;
+	SK_U32		NextExactMatchDrv;
+	SK_MAC_ADDR	Exact[SK_ADDR_EXACT_MATCHES];
+	SK_FILTER64	InexactFilter;			/* For 64-bit hash register. */
+	SK_FILTER64	InexactRlmtFilter;		/* For 64-bit hash register. */
+	SK_FILTER64	InexactDrvFilter;		/* For 64-bit hash register. */
+} SK_ADDR_PORT;
+
+
+struct s_AddrNet {
+/* ----- Public part (read-only) ----- */
+
+	SK_MAC_ADDR		CurrentMacAddress;	/* Logical MAC Address. */
+	SK_MAC_ADDR		PermanentMacAddress;	/* Logical MAC Address. */
+
+/* ----- Private part ----- */
+
+	SK_U32			ActivePort;		/* View of module ADDR. */
+	SK_BOOL			CurrentMacAddressSet;	/* CurrentMacAddress is set. */
+	SK_U8			Align01;
+	SK_U16			Align02;
+};
+
+
+typedef struct s_Addr {
+
+/* ----- Public part (read-only) ----- */
+
+	SK_ADDR_NET		Net[SK_MAX_NETS];
+	SK_ADDR_PORT	Port[SK_MAX_MACS];
+
+/* ----- Private part ----- */
+} SK_ADDR;
+
+/* function prototypes ********************************************************/
+
+#ifndef SK_KR_PROTO
+
+/* Functions provided by SkAddr */
+
+/* ANSI/C++ compliant function prototypes */
+
+extern	int	SkAddrInit(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	int	Level);
+
+extern	int	SkAddrMcClear(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	SK_U32	PortNumber,
+	int	Flags);
+
+extern	int	SkAddrMcAdd(
+	SK_AC		*pAC,
+	SK_IOC		IoC,
+	SK_U32		PortNumber,
+	SK_MAC_ADDR	*pMc,
+	int		Flags);
+
+extern	int	SkAddrMcUpdate(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	SK_U32	PortNumber);
+
+extern	int	SkAddrOverride(
+	SK_AC		*pAC,
+	SK_IOC		IoC,
+	SK_U32		PortNumber,
+	SK_MAC_ADDR	SK_FAR *pNewAddr,
+	int		Flags);
+
+extern	int	SkAddrPromiscuousChange(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	SK_U32	PortNumber,
+	int	NewPromMode);
+
+#ifndef SK_SLIM
+extern	int	SkAddrSwap(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	SK_U32	FromPortNumber,
+	SK_U32	ToPortNumber);
+#endif
+
+#else	/* defined(SK_KR_PROTO)) */
+
+/* Non-ANSI/C++ compliant function prototypes */
+
+#error KR-style prototypes are not yet provided.
+
+#endif	/* defined(SK_KR_PROTO)) */
+
+
+#ifdef __cplusplus
+}
+#endif	/* __cplusplus */
+
+#endif	/* __INC_SKADDR_H */
diff --git a/drivers/net/sk98lin/h/skcsum.h b/drivers/net/sk98lin/h/skcsum.h
new file mode 100644
index 0000000..6e256bd
--- /dev/null
+++ b/drivers/net/sk98lin/h/skcsum.h
@@ -0,0 +1,213 @@
+/******************************************************************************
+ *
+ * Name:	skcsum.h
+ * Project:	GEnesis - SysKonnect SK-NET Gigabit Ethernet (SK-98xx)
+ * Version:	$Revision: 1.10 $
+ * Date:	$Date: 2003/08/20 13:59:57 $
+ * Purpose:	Store/verify Internet checksum in send/receive packets.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *	(C)Copyright 1998-2001 SysKonnect GmbH.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * Description:
+ *
+ * Public header file for the "GEnesis" common module "CSUM".
+ *
+ * "GEnesis" is an abbreviation of "Gigabit Ethernet Network System in Silicon"
+ * and is the code name of this SysKonnect project.
+ *
+ * Compilation Options:
+ *
+ *	SK_USE_CSUM - Define if CSUM is to be used. Otherwise, CSUM will be an
+ *	empty module.
+ *
+ *	SKCS_OVERWRITE_PROTO - Define to overwrite the default protocol id
+ *	definitions. In this case, all SKCS_PROTO_xxx definitions must be made
+ *	external.
+ *
+ *	SKCS_OVERWRITE_STATUS - Define to overwrite the default return status
+ *	definitions. In this case, all SKCS_STATUS_xxx definitions must be made
+ *	external.
+ *
+ * Include File Hierarchy:
+ *
+ *	"h/skcsum.h"
+ *	 "h/sktypes.h"
+ *	 "h/skqueue.h"
+ *
+ ******************************************************************************/
+
+#ifndef __INC_SKCSUM_H
+#define __INC_SKCSUM_H
+
+#include "h/sktypes.h"
+#include "h/skqueue.h"
+
+/* defines ********************************************************************/
+
+/*
+ * Define the default bit flags for 'SKCS_PACKET_INFO.ProtocolFlags'  if no user
+ * overwrite.
+ */
+#ifndef SKCS_OVERWRITE_PROTO	/* User overwrite? */
+#define SKCS_PROTO_IP	0x1	/* IP (Internet Protocol version 4) */
+#define SKCS_PROTO_TCP	0x2	/* TCP (Transmission Control Protocol) */
+#define SKCS_PROTO_UDP	0x4	/* UDP (User Datagram Protocol) */
+
+/* Indices for protocol statistics. */
+#define SKCS_PROTO_STATS_IP	0
+#define SKCS_PROTO_STATS_UDP	1
+#define SKCS_PROTO_STATS_TCP	2
+#define SKCS_NUM_PROTOCOLS	3	/* Number of supported protocols. */
+#endif	/* !SKCS_OVERWRITE_PROTO */
+
+/*
+ * Define the default SKCS_STATUS type and values if no user overwrite.
+ *
+ *	SKCS_STATUS_UNKNOWN_IP_VERSION - Not an IP v4 frame.
+ *	SKCS_STATUS_IP_CSUM_ERROR - IP checksum error.
+ *	SKCS_STATUS_IP_CSUM_ERROR_TCP - IP checksum error in TCP frame.
+ *	SKCS_STATUS_IP_CSUM_ERROR_UDP - IP checksum error in UDP frame
+ *	SKCS_STATUS_IP_FRAGMENT - IP fragment (IP checksum ok).
+ *	SKCS_STATUS_IP_CSUM_OK - IP checksum ok (not a TCP or UDP frame).
+ *	SKCS_STATUS_TCP_CSUM_ERROR - TCP checksum error (IP checksum ok).
+ *	SKCS_STATUS_UDP_CSUM_ERROR - UDP checksum error (IP checksum ok).
+ *	SKCS_STATUS_TCP_CSUM_OK - IP and TCP checksum ok.
+ *	SKCS_STATUS_UDP_CSUM_OK - IP and UDP checksum ok.
+ *	SKCS_STATUS_IP_CSUM_OK_NO_UDP - IP checksum OK and no UDP checksum. 
+ */
+#ifndef SKCS_OVERWRITE_STATUS	/* User overwrite? */
+#define SKCS_STATUS	int	/* Define status type. */
+
+#define SKCS_STATUS_UNKNOWN_IP_VERSION	1
+#define SKCS_STATUS_IP_CSUM_ERROR		2
+#define SKCS_STATUS_IP_FRAGMENT			3
+#define SKCS_STATUS_IP_CSUM_OK			4
+#define SKCS_STATUS_TCP_CSUM_ERROR		5
+#define SKCS_STATUS_UDP_CSUM_ERROR		6
+#define SKCS_STATUS_TCP_CSUM_OK			7
+#define SKCS_STATUS_UDP_CSUM_OK			8
+/* needed for Microsoft */
+#define SKCS_STATUS_IP_CSUM_ERROR_UDP	9
+#define SKCS_STATUS_IP_CSUM_ERROR_TCP	10
+/* UDP checksum may be omitted */
+#define SKCS_STATUS_IP_CSUM_OK_NO_UDP	11
+#endif	/* !SKCS_OVERWRITE_STATUS */
+
+/* Clear protocol statistics event. */
+#define SK_CSUM_EVENT_CLEAR_PROTO_STATS	1
+
+/*
+ * Add two values in one's complement.
+ *
+ * Note: One of the two input values may be "longer" than 16-bit, but then the
+ * resulting sum may be 17 bits long. In this case, add zero to the result using
+ * SKCS_OC_ADD() again.
+ *
+ *	Result = Value1 + Value2
+ */
+#define SKCS_OC_ADD(Result, Value1, Value2) {				\
+	unsigned long Sum;						\
+									\
+	Sum = (unsigned long) (Value1) + (unsigned long) (Value2);	\
+	/* Add-in any carry. */						\
+	(Result) = (Sum & 0xffff) + (Sum >> 16);			\
+}
+
+/*
+ * Subtract two values in one's complement.
+ *
+ *	Result = Value1 - Value2
+ */
+#define SKCS_OC_SUB(Result, Value1, Value2)	\
+	SKCS_OC_ADD((Result), (Value1), ~(Value2) & 0xffff)
+
+/* typedefs *******************************************************************/
+
+/*
+ * SKCS_PROTO_STATS - The CSUM protocol statistics structure.
+ *
+ * There is one instance of this structure for each protocol supported.
+ */
+typedef struct s_CsProtocolStatistics {
+	SK_U64 RxOkCts;		/* Receive checksum ok. */
+	SK_U64 RxUnableCts;	/* Unable to verify receive checksum. */
+	SK_U64 RxErrCts;	/* Receive checksum error. */
+	SK_U64 TxOkCts;		/* Transmit checksum ok. */
+	SK_U64 TxUnableCts;	/* Unable to calculate checksum in hw. */
+} SKCS_PROTO_STATS;
+
+/*
+ * s_Csum - The CSUM module context structure.
+ */
+typedef struct s_Csum {
+	/* Enabled receive SK_PROTO_XXX bit flags. */
+	unsigned ReceiveFlags[SK_MAX_NETS];
+#ifdef TX_CSUM
+	unsigned TransmitFlags[SK_MAX_NETS];
+#endif /* TX_CSUM */
+
+	/* The protocol statistics structure; one per supported protocol. */
+	SKCS_PROTO_STATS ProtoStats[SK_MAX_NETS][SKCS_NUM_PROTOCOLS];
+} SK_CSUM;
+
+/*
+ * SKCS_PACKET_INFO - The packet information structure.
+ */
+typedef struct s_CsPacketInfo {
+	/* Bit field specifiying the desired/found protocols. */
+	unsigned ProtocolFlags;
+
+	/* Length of complete IP header, including any option fields. */
+	unsigned IpHeaderLength;
+
+	/* IP header checksum. */
+	unsigned IpHeaderChecksum;
+
+	/* TCP/UDP pseudo header checksum. */
+	unsigned PseudoHeaderChecksum;
+} SKCS_PACKET_INFO;
+
+/* function prototypes ********************************************************/
+
+#ifndef SK_CS_CALCULATE_CHECKSUM
+extern unsigned SkCsCalculateChecksum(
+	void		*pData,
+	unsigned	Length);
+#endif /* SK_CS_CALCULATE_CHECKSUM */
+
+extern int SkCsEvent(
+	SK_AC		*pAc,
+	SK_IOC		Ioc,
+	SK_U32		Event,
+	SK_EVPARA	Param);
+
+extern SKCS_STATUS SkCsGetReceiveInfo(
+	SK_AC		*pAc,
+	void		*pIpHeader,
+	unsigned	Checksum1,
+	unsigned	Checksum2,
+	int			NetNumber);
+
+extern void SkCsSetReceiveFlags(
+	SK_AC		*pAc,
+	unsigned	ReceiveFlags,
+	unsigned	*pChecksum1Offset,
+	unsigned	*pChecksum2Offset,
+	int			NetNumber);
+
+#endif	/* __INC_SKCSUM_H */
diff --git a/drivers/net/sk98lin/h/skdebug.h b/drivers/net/sk98lin/h/skdebug.h
new file mode 100644
index 0000000..3cba171
--- /dev/null
+++ b/drivers/net/sk98lin/h/skdebug.h
@@ -0,0 +1,74 @@
+/******************************************************************************
+ *
+ * Name:	skdebug.h
+ * Project:	Gigabit Ethernet Adapters, Common Modules
+ * Version:	$Revision: 1.14 $
+ * Date:	$Date: 2003/05/13 17:26:00 $
+ * Purpose:	SK specific DEBUG support
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *	(C)Copyright 1998-2002 SysKonnect.
+ *	(C)Copyright 2002-2003 Marvell.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+#ifndef __INC_SKDEBUG_H
+#define __INC_SKDEBUG_H
+
+#ifdef	DEBUG
+#ifndef SK_DBG_MSG
+#define SK_DBG_MSG(pAC,comp,cat,arg) \
+		if ( ((comp) & SK_DBG_CHKMOD(pAC)) && 	\
+		      ((cat) & SK_DBG_CHKCAT(pAC)) ) { 	\
+			SK_DBG_PRINTF arg ;		\
+		}
+#endif
+#else
+#define SK_DBG_MSG(pAC,comp,lev,arg)
+#endif
+
+/* PLS NOTE:
+ * =========
+ * Due to any restrictions of kernel printf routines do not use other
+ * format identifiers as: %x %d %c %s .
+ * Never use any combined format identifiers such as: %lx %ld in your
+ * printf - argument (arg) because some OS specific kernel printfs may
+ * only support some basic identifiers.
+ */
+
+/* Debug modules */
+
+#define SK_DBGMOD_MERR	0x00000001L	/* general module error indication */
+#define SK_DBGMOD_HWM	0x00000002L	/* Hardware init module */
+#define SK_DBGMOD_RLMT	0x00000004L	/* RLMT module */
+#define SK_DBGMOD_VPD	0x00000008L	/* VPD module */
+#define SK_DBGMOD_I2C	0x00000010L	/* I2C module */
+#define SK_DBGMOD_PNMI	0x00000020L	/* PNMI module */
+#define SK_DBGMOD_CSUM	0x00000040L	/* CSUM module */
+#define SK_DBGMOD_ADDR	0x00000080L	/* ADDR module */
+#define SK_DBGMOD_PECP	0x00000100L	/* PECP module */
+#define SK_DBGMOD_POWM	0x00000200L	/* Power Management module */
+
+/* Debug events */
+
+#define SK_DBGCAT_INIT	0x00000001L	/* module/driver initialization */
+#define SK_DBGCAT_CTRL	0x00000002L	/* controlling devices */
+#define SK_DBGCAT_ERR	0x00000004L	/* error handling paths */
+#define SK_DBGCAT_TX	0x00000008L	/* transmit path */
+#define SK_DBGCAT_RX	0x00000010L	/* receive path */
+#define SK_DBGCAT_IRQ	0x00000020L	/* general IRQ handling */
+#define SK_DBGCAT_QUEUE	0x00000040L	/* any queue management */
+#define SK_DBGCAT_DUMP	0x00000080L	/* large data output e.g. hex dump */
+#define SK_DBGCAT_FATAL	0x00000100L	/* fatal error */
+
+#endif	/* __INC_SKDEBUG_H */
diff --git a/drivers/net/sk98lin/h/skdrv1st.h b/drivers/net/sk98lin/h/skdrv1st.h
new file mode 100644
index 0000000..91b8d4f
--- /dev/null
+++ b/drivers/net/sk98lin/h/skdrv1st.h
@@ -0,0 +1,188 @@
+/******************************************************************************
+ *
+ * Name:	skdrv1st.h
+ * Project:	GEnesis, PCI Gigabit Ethernet Adapter
+ * Version:	$Revision: 1.4 $
+ * Date:	$Date: 2003/11/12 14:28:14 $
+ * Purpose:	First header file for driver and all other modules
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *	(C)Copyright 1998-2002 SysKonnect GmbH.
+ *	(C)Copyright 2002-2003 Marvell.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * Description:
+ *
+ * This is the first include file of the driver, which includes all
+ * neccessary system header files and some of the GEnesis header files.
+ * It also defines some basic items.
+ *
+ * Include File Hierarchy:
+ *
+ *	see skge.c
+ *
+ ******************************************************************************/
+
+#ifndef __INC_SKDRV1ST_H
+#define __INC_SKDRV1ST_H
+
+typedef struct s_AC	SK_AC;
+
+/* Set card versions */
+#define SK_FAR
+
+/* override some default functions with optimized linux functions */
+
+#define SK_PNMI_STORE_U16(p,v)		memcpy((char*)(p),(char*)&(v),2)
+#define SK_PNMI_STORE_U32(p,v)		memcpy((char*)(p),(char*)&(v),4)
+#define SK_PNMI_STORE_U64(p,v)		memcpy((char*)(p),(char*)&(v),8)
+#define SK_PNMI_READ_U16(p,v)		memcpy((char*)&(v),(char*)(p),2)
+#define SK_PNMI_READ_U32(p,v)		memcpy((char*)&(v),(char*)(p),4)
+#define SK_PNMI_READ_U64(p,v)		memcpy((char*)&(v),(char*)(p),8)
+
+#define SK_ADDR_EQUAL(a1,a2)		(!memcmp(a1,a2,6))
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/bitops.h>
+#include <asm/byteorder.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+
+#include <linux/init.h>
+#include <asm/uaccess.h>
+#include <net/checksum.h>
+
+#define SK_CS_CALCULATE_CHECKSUM
+#ifndef CONFIG_X86_64
+#define SkCsCalculateChecksum(p,l)	((~ip_compute_csum(p, l)) & 0xffff)
+#else
+#define SkCsCalculateChecksum(p,l)	((~ip_fast_csum(p, l)) & 0xffff)
+#endif
+
+#include	"h/sktypes.h"
+#include	"h/skerror.h"
+#include	"h/skdebug.h"
+#include	"h/lm80.h"
+#include	"h/xmac_ii.h"
+
+#ifdef __LITTLE_ENDIAN
+#define SK_LITTLE_ENDIAN
+#else
+#define SK_BIG_ENDIAN
+#endif
+
+#define SK_NET_DEVICE	net_device
+
+
+/* we use gethrtime(), return unit: nanoseconds */
+#define SK_TICKS_PER_SEC	100
+
+#define	SK_MEM_MAPPED_IO
+
+// #define SK_RLMT_SLOW_LOOKAHEAD
+
+#define SK_MAX_MACS		2
+#define SK_MAX_NETS		2
+
+#define SK_IOC			char __iomem *
+
+typedef struct s_DrvRlmtMbuf SK_MBUF;
+
+#define	SK_CONST64	INT64_C
+#define	SK_CONSTU64	UINT64_C
+
+#define SK_MEMCPY(dest,src,size)	memcpy(dest,src,size)
+#define SK_MEMCMP(s1,s2,size)		memcmp(s1,s2,size)
+#define SK_MEMSET(dest,val,size)	memset(dest,val,size)
+#define SK_STRLEN(pStr)			strlen((char*)(pStr))
+#define SK_STRNCPY(pDest,pSrc,size)	strncpy((char*)(pDest),(char*)(pSrc),size)
+#define SK_STRCMP(pStr1,pStr2)		strcmp((char*)(pStr1),(char*)(pStr2))
+
+/* macros to access the adapter */
+#define SK_OUT8(b,a,v)		writeb((v), ((b)+(a)))	
+#define SK_OUT16(b,a,v)		writew((v), ((b)+(a)))	
+#define SK_OUT32(b,a,v)		writel((v), ((b)+(a)))	
+#define SK_IN8(b,a,pv)		(*(pv) = readb((b)+(a)))
+#define SK_IN16(b,a,pv)		(*(pv) = readw((b)+(a)))
+#define SK_IN32(b,a,pv)		(*(pv) = readl((b)+(a)))
+
+#define int8_t		char
+#define int16_t		short
+#define int32_t		long
+#define int64_t		long long
+#define uint8_t		u_char
+#define uint16_t	u_short
+#define uint32_t	u_long
+#define uint64_t	unsigned long long
+#define t_scalar_t	int
+#define t_uscalar_t	unsigned int
+#define uintptr_t	unsigned long
+
+#define __CONCAT__(A,B) A##B
+
+#define INT32_C(a)		__CONCAT__(a,L)
+#define INT64_C(a)		__CONCAT__(a,LL)
+#define UINT32_C(a)		__CONCAT__(a,UL)
+#define UINT64_C(a)		__CONCAT__(a,ULL)
+
+#ifdef DEBUG
+#define SK_DBG_PRINTF		printk
+#ifndef SK_DEBUG_CHKMOD
+#define SK_DEBUG_CHKMOD		0
+#endif
+#ifndef SK_DEBUG_CHKCAT
+#define SK_DEBUG_CHKCAT		0
+#endif
+/* those come from the makefile */
+#define SK_DBG_CHKMOD(pAC)	(SK_DEBUG_CHKMOD)
+#define SK_DBG_CHKCAT(pAC)	(SK_DEBUG_CHKCAT)
+
+extern void SkDbgPrintf(const char *format,...);
+
+#define SK_DBGMOD_DRV			0x00010000
+
+/**** possible driver debug categories ********************************/
+#define SK_DBGCAT_DRV_ENTRY		0x00010000
+#define SK_DBGCAT_DRV_SAP		0x00020000
+#define SK_DBGCAT_DRV_MCA		0x00040000
+#define SK_DBGCAT_DRV_TX_PROGRESS	0x00080000
+#define SK_DBGCAT_DRV_RX_PROGRESS	0x00100000
+#define SK_DBGCAT_DRV_PROGRESS		0x00200000
+#define SK_DBGCAT_DRV_MSG		0x00400000
+#define SK_DBGCAT_DRV_PROM		0x00800000
+#define SK_DBGCAT_DRV_TX_FRAME		0x01000000
+#define SK_DBGCAT_DRV_ERROR		0x02000000
+#define SK_DBGCAT_DRV_INT_SRC		0x04000000
+#define SK_DBGCAT_DRV_EVENT		0x08000000
+
+#endif
+
+#define SK_ERR_LOG		SkErrorLog
+
+extern void SkErrorLog(SK_AC*, int, int, char*);
+
+#endif
+
diff --git a/drivers/net/sk98lin/h/skdrv2nd.h b/drivers/net/sk98lin/h/skdrv2nd.h
new file mode 100644
index 0000000..3fa6717
--- /dev/null
+++ b/drivers/net/sk98lin/h/skdrv2nd.h
@@ -0,0 +1,447 @@
+/******************************************************************************
+ *
+ * Name:	skdrv2nd.h
+ * Project:	GEnesis, PCI Gigabit Ethernet Adapter
+ * Version:	$Revision: 1.10 $
+ * Date:	$Date: 2003/12/11 16:04:45 $
+ * Purpose:	Second header file for driver and all other modules
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *	(C)Copyright 1998-2002 SysKonnect GmbH.
+ *	(C)Copyright 2002-2003 Marvell.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * Description:
+ *
+ * This is the second include file of the driver, which includes all other
+ * neccessary files and defines all structures and constants used by the
+ * driver and the common modules.
+ *
+ * Include File Hierarchy:
+ *
+ *	see skge.c
+ *
+ ******************************************************************************/
+
+#ifndef __INC_SKDRV2ND_H
+#define __INC_SKDRV2ND_H
+
+#include "h/skqueue.h"
+#include "h/skgehwt.h"
+#include "h/sktimer.h"
+#include "h/ski2c.h"
+#include "h/skgepnmi.h"
+#include "h/skvpd.h"
+#include "h/skgehw.h"
+#include "h/skgeinit.h"
+#include "h/skaddr.h"
+#include "h/skgesirq.h"
+#include "h/skcsum.h"
+#include "h/skrlmt.h"
+#include "h/skgedrv.h"
+
+
+extern SK_MBUF		*SkDrvAllocRlmtMbuf(SK_AC*, SK_IOC, unsigned);
+extern void		SkDrvFreeRlmtMbuf(SK_AC*, SK_IOC, SK_MBUF*);
+extern SK_U64		SkOsGetTime(SK_AC*);
+extern int		SkPciReadCfgDWord(SK_AC*, int, SK_U32*);
+extern int		SkPciReadCfgWord(SK_AC*, int, SK_U16*);
+extern int		SkPciReadCfgByte(SK_AC*, int, SK_U8*);
+extern int		SkPciWriteCfgWord(SK_AC*, int, SK_U16);
+extern int		SkPciWriteCfgByte(SK_AC*, int, SK_U8);
+extern int		SkDrvEvent(SK_AC*, SK_IOC IoC, SK_U32, SK_EVPARA);
+
+#ifdef SK_DIAG_SUPPORT
+extern int		SkDrvEnterDiagMode(SK_AC *pAc);
+extern int		SkDrvLeaveDiagMode(SK_AC *pAc);
+#endif
+
+struct s_DrvRlmtMbuf {
+	SK_MBUF		*pNext;		/* Pointer to next RLMT Mbuf. */
+	SK_U8		*pData;		/* Data buffer (virtually contig.). */
+	unsigned	Size;		/* Data buffer size. */
+	unsigned	Length;		/* Length of packet (<= Size). */
+	SK_U32		PortIdx;	/* Receiving/transmitting port. */
+#ifdef SK_RLMT_MBUF_PRIVATE
+	SK_RLMT_MBUF	Rlmt;		/* Private part for RLMT. */
+#endif  /* SK_RLMT_MBUF_PRIVATE */
+	struct sk_buff	*pOs;		/* Pointer to message block */
+};
+
+
+/*
+ * Time macros
+ */
+#if SK_TICKS_PER_SEC == 100
+#define SK_PNMI_HUNDREDS_SEC(t)	(t)
+#else
+#define SK_PNMI_HUNDREDS_SEC(t)	((((unsigned long)t) * 100) / \
+										(SK_TICKS_PER_SEC))
+#endif
+
+/*
+ * New SkOsGetTime
+ */
+#define SkOsGetTimeCurrent(pAC, pUsec) {\
+	struct timeval t;\
+	do_gettimeofday(&t);\
+	*pUsec = ((((t.tv_sec) * 1000000L)+t.tv_usec)/10000);\
+}
+
+
+/*
+ * ioctl definitions
+ */
+#define		SK_IOCTL_BASE		(SIOCDEVPRIVATE)
+#define		SK_IOCTL_GETMIB		(SK_IOCTL_BASE + 0)
+#define		SK_IOCTL_SETMIB		(SK_IOCTL_BASE + 1)
+#define		SK_IOCTL_PRESETMIB	(SK_IOCTL_BASE + 2)
+#define		SK_IOCTL_GEN		(SK_IOCTL_BASE + 3)
+#define		SK_IOCTL_DIAG		(SK_IOCTL_BASE + 4)
+
+typedef struct s_IOCTL	SK_GE_IOCTL;
+
+struct s_IOCTL {
+	char __user *	pData;
+	unsigned int	Len;
+};
+
+
+/*
+ * define sizes of descriptor rings in bytes
+ */
+
+#define		TX_RING_SIZE	(8*1024)
+#define		RX_RING_SIZE	(24*1024)
+
+/*
+ * Buffer size for ethernet packets
+ */
+#define	ETH_BUF_SIZE	1540
+#define	ETH_MAX_MTU	1514
+#define ETH_MIN_MTU	60
+#define ETH_MULTICAST_BIT	0x01
+#define SK_JUMBO_MTU	9000
+
+/*
+ * transmit priority selects the queue: LOW=asynchron, HIGH=synchron
+ */
+#define TX_PRIO_LOW	0
+#define TX_PRIO_HIGH	1
+
+/*
+ * alignment of rx/tx descriptors
+ */
+#define DESCR_ALIGN	64
+
+/*
+ * definitions for pnmi. TODO
+ */
+#define SK_DRIVER_RESET(pAC, IoC)	0
+#define SK_DRIVER_SENDEVENT(pAC, IoC)	0
+#define SK_DRIVER_SELFTEST(pAC, IoC)	0
+/* For get mtu you must add an own function */
+#define SK_DRIVER_GET_MTU(pAc,IoC,i)	0
+#define SK_DRIVER_SET_MTU(pAc,IoC,i,v)	0
+#define SK_DRIVER_PRESET_MTU(pAc,IoC,i,v)	0
+
+/*
+** Interim definition of SK_DRV_TIMER placed in this file until 
+** common modules have been finalized
+*/
+#define SK_DRV_TIMER			11 
+#define	SK_DRV_MODERATION_TIMER		1
+#define SK_DRV_MODERATION_TIMER_LENGTH  1000000  /* 1 second */
+#define SK_DRV_RX_CLEANUP_TIMER		2
+#define SK_DRV_RX_CLEANUP_TIMER_LENGTH	1000000	 /* 100 millisecs */
+
+/*
+** Definitions regarding transmitting frames 
+** any calculating any checksum.
+*/
+#define C_LEN_ETHERMAC_HEADER_DEST_ADDR 6
+#define C_LEN_ETHERMAC_HEADER_SRC_ADDR  6
+#define C_LEN_ETHERMAC_HEADER_LENTYPE   2
+#define C_LEN_ETHERMAC_HEADER           ( (C_LEN_ETHERMAC_HEADER_DEST_ADDR) + \
+                                          (C_LEN_ETHERMAC_HEADER_SRC_ADDR)  + \
+                                          (C_LEN_ETHERMAC_HEADER_LENTYPE) )
+
+#define C_LEN_ETHERMTU_MINSIZE          46
+#define C_LEN_ETHERMTU_MAXSIZE_STD      1500
+#define C_LEN_ETHERMTU_MAXSIZE_JUMBO    9000
+
+#define C_LEN_ETHERNET_MINSIZE          ( (C_LEN_ETHERMAC_HEADER) + \
+                                          (C_LEN_ETHERMTU_MINSIZE) )
+
+#define C_OFFSET_IPHEADER               C_LEN_ETHERMAC_HEADER
+#define C_OFFSET_IPHEADER_IPPROTO       9
+#define C_OFFSET_TCPHEADER_TCPCS        16
+#define C_OFFSET_UDPHEADER_UDPCS        6
+
+#define C_OFFSET_IPPROTO                ( (C_LEN_ETHERMAC_HEADER) + \
+                                          (C_OFFSET_IPHEADER_IPPROTO) )
+
+#define C_PROTO_ID_UDP                  17       /* refer to RFC 790 or Stevens'   */
+#define C_PROTO_ID_TCP                  6        /* TCP/IP illustrated for details */
+
+/* TX and RX descriptors *****************************************************/
+
+typedef struct s_RxD RXD; /* the receive descriptor */
+
+struct s_RxD {
+	volatile SK_U32	RBControl;	/* Receive Buffer Control */
+	SK_U32		VNextRxd;	/* Next receive descriptor,low dword */
+	SK_U32		VDataLow;	/* Receive buffer Addr, low dword */
+	SK_U32		VDataHigh;	/* Receive buffer Addr, high dword */
+	SK_U32		FrameStat;	/* Receive Frame Status word */
+	SK_U32		TimeStamp;	/* Time stamp from XMAC */
+	SK_U32		TcpSums;	/* TCP Sum 2 / TCP Sum 1 */
+	SK_U32		TcpSumStarts;	/* TCP Sum Start 2 / TCP Sum Start 1 */
+	RXD		*pNextRxd;	/* Pointer to next Rxd */
+	struct sk_buff	*pMBuf;		/* Pointer to Linux' socket buffer */
+};
+
+typedef struct s_TxD TXD; /* the transmit descriptor */
+
+struct s_TxD {
+	volatile SK_U32	TBControl;	/* Transmit Buffer Control */
+	SK_U32		VNextTxd;	/* Next transmit descriptor,low dword */
+	SK_U32		VDataLow;	/* Transmit Buffer Addr, low dword */
+	SK_U32		VDataHigh;	/* Transmit Buffer Addr, high dword */
+	SK_U32		FrameStat;	/* Transmit Frame Status Word */
+	SK_U32		TcpSumOfs;	/* Reserved / TCP Sum Offset */
+	SK_U16		TcpSumSt;	/* TCP Sum Start */
+	SK_U16		TcpSumWr;	/* TCP Sum Write */
+	SK_U32		TcpReserved;	/* not used */
+	TXD		*pNextTxd;	/* Pointer to next Txd */
+	struct sk_buff	*pMBuf;		/* Pointer to Linux' socket buffer */
+};
+
+/* Used interrupt bits in the interrupts source register *********************/
+
+#define DRIVER_IRQS	((IS_IRQ_SW)   | \
+			(IS_R1_F)      |(IS_R2_F)  | \
+			(IS_XS1_F)     |(IS_XA1_F) | \
+			(IS_XS2_F)     |(IS_XA2_F))
+
+#define SPECIAL_IRQS	((IS_HW_ERR)   |(IS_I2C_READY)  | \
+			(IS_EXT_REG)   |(IS_TIMINT)     | \
+			(IS_PA_TO_RX1) |(IS_PA_TO_RX2)  | \
+			(IS_PA_TO_TX1) |(IS_PA_TO_TX2)  | \
+			(IS_MAC1)      |(IS_LNK_SYNC_M1)| \
+			(IS_MAC2)      |(IS_LNK_SYNC_M2)| \
+			(IS_R1_C)      |(IS_R2_C)       | \
+			(IS_XS1_C)     |(IS_XA1_C)      | \
+			(IS_XS2_C)     |(IS_XA2_C))
+
+#define IRQ_MASK	((IS_IRQ_SW)   | \
+			(IS_R1_B)      |(IS_R1_F)     |(IS_R2_B) |(IS_R2_F) | \
+			(IS_XS1_B)     |(IS_XS1_F)    |(IS_XA1_B)|(IS_XA1_F)| \
+			(IS_XS2_B)     |(IS_XS2_F)    |(IS_XA2_B)|(IS_XA2_F)| \
+			(IS_HW_ERR)    |(IS_I2C_READY)| \
+			(IS_EXT_REG)   |(IS_TIMINT)   | \
+			(IS_PA_TO_RX1) |(IS_PA_TO_RX2)| \
+			(IS_PA_TO_TX1) |(IS_PA_TO_TX2)| \
+			(IS_MAC1)      |(IS_MAC2)     | \
+			(IS_R1_C)      |(IS_R2_C)     | \
+			(IS_XS1_C)     |(IS_XA1_C)    | \
+			(IS_XS2_C)     |(IS_XA2_C))
+
+#define IRQ_HWE_MASK	(IS_ERR_MSK) /* enable all HW irqs */
+
+typedef struct s_DevNet DEV_NET;
+
+struct s_DevNet {
+	int             PortNr;
+	int             NetNr;
+	SK_AC   *pAC;
+};  
+
+typedef struct s_TxPort		TX_PORT;
+
+struct s_TxPort {
+	/* the transmit descriptor rings */
+	caddr_t		pTxDescrRing;	/* descriptor area memory */
+	SK_U64		VTxDescrRing;	/* descr. area bus virt. addr. */
+	TXD		*pTxdRingHead;	/* Head of Tx rings */
+	TXD		*pTxdRingTail;	/* Tail of Tx rings */
+	TXD		*pTxdRingPrev;	/* descriptor sent previously */
+	int		TxdRingFree;	/* # of free entrys */
+	spinlock_t	TxDesRingLock;	/* serialize descriptor accesses */
+	SK_IOC		HwAddr;		/* bmu registers address */
+	int		PortIndex;	/* index number of port (0 or 1) */
+};
+
+typedef struct s_RxPort		RX_PORT;
+
+struct s_RxPort {
+	/* the receive descriptor rings */
+	caddr_t		pRxDescrRing;	/* descriptor area memory */
+	SK_U64		VRxDescrRing;   /* descr. area bus virt. addr. */
+	RXD		*pRxdRingHead;	/* Head of Rx rings */
+	RXD		*pRxdRingTail;	/* Tail of Rx rings */
+	RXD		*pRxdRingPrev;	/* descriptor given to BMU previously */
+	int		RxdRingFree;	/* # of free entrys */
+	int		RxCsum;		/* use receive checksum hardware */
+	spinlock_t	RxDesRingLock;	/* serialize descriptor accesses */
+	int		RxFillLimit;	/* limit for buffers in ring */
+	SK_IOC		HwAddr;		/* bmu registers address */
+	int		PortIndex;	/* index number of port (0 or 1) */
+};
+
+/* Definitions needed for interrupt moderation *******************************/
+
+#define IRQ_EOF_AS_TX     ((IS_XA1_F)     | (IS_XA2_F))
+#define IRQ_EOF_SY_TX     ((IS_XS1_F)     | (IS_XS2_F))
+#define IRQ_MASK_TX_ONLY  ((IRQ_EOF_AS_TX)| (IRQ_EOF_SY_TX))
+#define IRQ_MASK_RX_ONLY  ((IS_R1_F)      | (IS_R2_F))
+#define IRQ_MASK_SP_ONLY  (SPECIAL_IRQS)
+#define IRQ_MASK_TX_RX    ((IRQ_MASK_TX_ONLY)| (IRQ_MASK_RX_ONLY))
+#define IRQ_MASK_SP_RX    ((SPECIAL_IRQS)    | (IRQ_MASK_RX_ONLY))
+#define IRQ_MASK_SP_TX    ((SPECIAL_IRQS)    | (IRQ_MASK_TX_ONLY))
+#define IRQ_MASK_RX_TX_SP ((SPECIAL_IRQS)    | (IRQ_MASK_TX_RX))
+
+#define C_INT_MOD_NONE                 1
+#define C_INT_MOD_STATIC               2
+#define C_INT_MOD_DYNAMIC              4
+
+#define C_CLK_FREQ_GENESIS      53215000 /* shorter: 53.125 MHz  */
+#define C_CLK_FREQ_YUKON        78215000 /* shorter: 78.125 MHz  */
+
+#define C_INTS_PER_SEC_DEFAULT      2000 
+#define C_INT_MOD_ENABLE_PERCENTAGE   50 /* if higher 50% enable */
+#define C_INT_MOD_DISABLE_PERCENTAGE  50 /* if lower 50% disable */
+#define C_INT_MOD_IPS_LOWER_RANGE     30
+#define C_INT_MOD_IPS_UPPER_RANGE     40000
+
+
+typedef struct s_DynIrqModInfo  DIM_INFO;
+struct s_DynIrqModInfo {
+	unsigned long   PrevTimeVal;
+	unsigned int    PrevSysLoad;
+	unsigned int    PrevUsedTime;
+	unsigned int    PrevTotalTime;
+	int             PrevUsedDescrRatio;
+	int             NbrProcessedDescr;
+        SK_U64          PrevPort0RxIntrCts;
+        SK_U64          PrevPort1RxIntrCts;
+        SK_U64          PrevPort0TxIntrCts;
+        SK_U64          PrevPort1TxIntrCts;
+	SK_BOOL         ModJustEnabled;     /* Moderation just enabled yes/no */
+
+	int             MaxModIntsPerSec;            /* Moderation Threshold */
+	int             MaxModIntsPerSecUpperLimit;  /* Upper limit for DIM  */
+	int             MaxModIntsPerSecLowerLimit;  /* Lower limit for DIM  */
+
+	long            MaskIrqModeration;   /* ModIrqType (eg. 'TxRx')      */
+	SK_BOOL         DisplayStats;        /* Stats yes/no                 */
+	SK_BOOL         AutoSizing;          /* Resize DIM-timer on/off      */
+	int             IntModTypeSelect;    /* EnableIntMod (eg. 'dynamic') */
+
+	SK_TIMER        ModTimer; /* just some timer */
+};
+
+typedef struct s_PerStrm	PER_STRM;
+
+#define SK_ALLOC_IRQ	0x00000001
+
+#ifdef SK_DIAG_SUPPORT
+#define	DIAG_ACTIVE		1
+#define	DIAG_NOTACTIVE		0
+#endif
+
+/****************************************************************************
+ * Per board structure / Adapter Context structure:
+ *	Allocated within attach(9e) and freed within detach(9e).
+ *	Contains all 'per device' necessary handles, flags, locks etc.:
+ */
+struct s_AC  {
+	SK_GEINIT	GIni;		/* GE init struct */
+	SK_PNMI		Pnmi;		/* PNMI data struct */
+	SK_VPD		vpd;		/* vpd data struct */
+	SK_QUEUE	Event;		/* Event queue */
+	SK_HWT		Hwt;		/* Hardware Timer control struct */
+	SK_TIMCTRL	Tim;		/* Software Timer control struct */
+	SK_I2C		I2c;		/* I2C relevant data structure */
+	SK_ADDR		Addr;		/* for Address module */
+	SK_CSUM		Csum;		/* for checksum module */
+	SK_RLMT		Rlmt;		/* for rlmt module */
+	spinlock_t	SlowPathLock;	/* Normal IRQ lock */
+	struct timer_list BlinkTimer;	/* for LED blinking */
+	int		LedsOn;
+	SK_PNMI_STRUCT_DATA PnmiStruct;	/* structure to get all Pnmi-Data */
+	int			RlmtMode;	/* link check mode to set */
+	int			RlmtNets;	/* Number of nets */
+	
+	SK_IOC		IoBase;		/* register set of adapter */
+	int		BoardLevel;	/* level of active hw init (0-2) */
+
+	SK_U32		AllocFlag;	/* flag allocation of resources */
+	struct pci_dev	*PciDev;	/* for access to pci config space */
+	struct SK_NET_DEVICE	*dev[2];	/* pointer to device struct */
+
+	int		RxBufSize;	/* length of receive buffers */
+        struct net_device_stats stats;	/* linux 'netstat -i' statistics */
+	int		Index;		/* internal board index number */
+
+	/* adapter RAM sizes for queues of active port */
+	int		RxQueueSize;	/* memory used for receive queue */
+	int		TxSQueueSize;	/* memory used for sync. tx queue */
+	int		TxAQueueSize;	/* memory used for async. tx queue */
+
+	int		PromiscCount;	/* promiscuous mode counter  */
+	int		AllMultiCount;  /* allmulticast mode counter */
+	int		MulticCount;	/* number of different MC    */
+					/*  addresses for this board */
+					/*  (may be more than HW can)*/
+
+	int		HWRevision;	/* Hardware revision */
+	int		ActivePort;	/* the active XMAC port */
+	int		MaxPorts;		/* number of activated ports */
+	int		TxDescrPerRing;	/* # of descriptors per tx ring */
+	int		RxDescrPerRing;	/* # of descriptors per rx ring */
+
+	caddr_t		pDescrMem;	/* Pointer to the descriptor area */
+	dma_addr_t	pDescrMemDMA;	/* PCI DMA address of area */
+
+	/* the port structures with descriptor rings */
+	TX_PORT		TxPort[SK_MAX_MACS][2];
+	RX_PORT		RxPort[SK_MAX_MACS];
+
+	SK_BOOL		CheckQueue;	/* check event queue soon */
+	SK_TIMER        DrvCleanupTimer;/* to check for pending descriptors */
+	DIM_INFO        DynIrqModInfo;  /* all data related to DIM */
+
+	/* Only for tests */
+	int		PortDown;
+	int		ChipsetType;	/*  Chipset family type 
+					 *  0 == Genesis family support
+					 *  1 == Yukon family support
+					 */
+#ifdef SK_DIAG_SUPPORT
+	SK_U32		DiagModeActive;		/* is diag active?	*/
+	SK_BOOL		DiagFlowCtrl;		/* for control purposes	*/
+	SK_PNMI_STRUCT_DATA PnmiBackup;		/* backup structure for all Pnmi-Data */
+	SK_BOOL         WasIfUp[SK_MAX_MACS];   /* for OpenClose while 
+						 * DIAG is busy with NIC 
+						 */
+#endif
+
+};
+
+
+#endif /* __INC_SKDRV2ND_H */
+
diff --git a/drivers/net/sk98lin/h/skerror.h b/drivers/net/sk98lin/h/skerror.h
new file mode 100644
index 0000000..da062f7
--- /dev/null
+++ b/drivers/net/sk98lin/h/skerror.h
@@ -0,0 +1,55 @@
+/******************************************************************************
+ *
+ * Name:	skerror.h
+ * Project:	Gigabit Ethernet Adapters, Common Modules
+ * Version:	$Revision: 1.7 $
+ * Date:	$Date: 2003/05/13 17:25:13 $
+ * Purpose:	SK specific Error log support
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *	(C)Copyright 1998-2002 SysKonnect.
+ *	(C)Copyright 2002-2003 Marvell.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+#ifndef _INC_SKERROR_H_
+#define _INC_SKERROR_H_
+
+/*
+ * Define Error Classes
+ */
+#define	SK_ERRCL_OTHER		(0)		/* Other error */
+#define	SK_ERRCL_CONFIG		(1L<<0)	/* Configuration error */
+#define	SK_ERRCL_INIT		(1L<<1)	/* Initialization error */
+#define	SK_ERRCL_NORES		(1L<<2)	/* Out of Resources error */
+#define	SK_ERRCL_SW			(1L<<3)	/* Internal Software error */
+#define	SK_ERRCL_HW			(1L<<4)	/* Hardware Failure */
+#define	SK_ERRCL_COMM		(1L<<5)	/* Communication error */
+
+
+/*
+ * Define Error Code Bases
+ */
+#define	SK_ERRBASE_RLMT		 100	/* Base Error number for RLMT */
+#define	SK_ERRBASE_HWINIT	 200	/* Base Error number for HWInit */
+#define	SK_ERRBASE_VPD		 300	/* Base Error number for VPD */
+#define	SK_ERRBASE_PNMI		 400	/* Base Error number for PNMI */
+#define	SK_ERRBASE_CSUM		 500	/* Base Error number for Checksum */
+#define	SK_ERRBASE_SIRQ		 600	/* Base Error number for Special IRQ */
+#define	SK_ERRBASE_I2C		 700	/* Base Error number for I2C module */
+#define	SK_ERRBASE_QUEUE	 800	/* Base Error number for Scheduler */
+#define	SK_ERRBASE_ADDR		 900	/* Base Error number for Address module */
+#define SK_ERRBASE_PECP		1000    /* Base Error number for PECP */
+#define	SK_ERRBASE_DRV		1100	/* Base Error number for Driver */
+
+#endif	/* _INC_SKERROR_H_ */
diff --git a/drivers/net/sk98lin/h/skgedrv.h b/drivers/net/sk98lin/h/skgedrv.h
new file mode 100644
index 0000000..44fd4c3
--- /dev/null
+++ b/drivers/net/sk98lin/h/skgedrv.h
@@ -0,0 +1,51 @@
+/******************************************************************************
+ *
+ * Name:	skgedrv.h
+ * Project:	Gigabit Ethernet Adapters, Common Modules
+ * Version:	$Revision: 1.10 $
+ * Date:	$Date: 2003/07/04 12:25:01 $
+ * Purpose:	Interface with the driver
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *	(C)Copyright 1998-2002 SysKonnect.
+ *	(C)Copyright 2002-2003 Marvell.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+#ifndef __INC_SKGEDRV_H_
+#define __INC_SKGEDRV_H_
+
+/* defines ********************************************************************/
+
+/*
+ * Define the driver events.
+ * Usually the events are defined by the destination module.
+ * In case of the driver we put the definition of the events here.
+ */
+#define SK_DRV_PORT_RESET		 1	/* The port needs to be reset */
+#define SK_DRV_NET_UP   		 2	/* The net is operational */
+#define SK_DRV_NET_DOWN			 3	/* The net is down */
+#define SK_DRV_SWITCH_SOFT		 4	/* Ports switch with both links connected */
+#define SK_DRV_SWITCH_HARD		 5	/* Port switch due to link failure */
+#define SK_DRV_RLMT_SEND		 6	/* Send a RLMT packet */
+#define SK_DRV_ADAP_FAIL		 7	/* The whole adapter fails */
+#define SK_DRV_PORT_FAIL		 8	/* One port fails */
+#define SK_DRV_SWITCH_INTERN	 9	/* Port switch by the driver itself */
+#define SK_DRV_POWER_DOWN		10	/* Power down mode */
+#define SK_DRV_TIMER			11	/* Timer for free use */
+#ifdef SK_NO_RLMT
+#define SK_DRV_LINK_UP  		12	/* Link Up event for driver */
+#define SK_DRV_LINK_DOWN		13	/* Link Down event for driver */
+#endif
+#define SK_DRV_DOWNSHIFT_DET	14	/* Downshift 4-Pair / 2-Pair (YUKON only) */
+#endif /* __INC_SKGEDRV_H_ */
diff --git a/drivers/net/sk98lin/h/skgehw.h b/drivers/net/sk98lin/h/skgehw.h
new file mode 100644
index 0000000..f6282b7
--- /dev/null
+++ b/drivers/net/sk98lin/h/skgehw.h
@@ -0,0 +1,2126 @@
+/******************************************************************************
+ *
+ * Name:	skgehw.h
+ * Project:	Gigabit Ethernet Adapters, Common Modules
+ * Version:	$Revision: 1.56 $
+ * Date:	$Date: 2003/09/23 09:01:00 $
+ * Purpose:	Defines and Macros for the Gigabit Ethernet Adapter Product Family
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *	(C)Copyright 1998-2002 SysKonnect.
+ *	(C)Copyright 2002-2003 Marvell.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+#ifndef __INC_SKGEHW_H
+#define __INC_SKGEHW_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif	/* __cplusplus */
+
+/* defines ********************************************************************/
+
+#define BIT_31		(1UL << 31)
+#define BIT_30		(1L << 30)
+#define BIT_29		(1L << 29)
+#define BIT_28		(1L << 28)
+#define BIT_27		(1L << 27)
+#define BIT_26		(1L << 26)
+#define BIT_25		(1L << 25)
+#define BIT_24		(1L << 24)
+#define BIT_23		(1L << 23)
+#define BIT_22		(1L << 22)
+#define BIT_21		(1L << 21)
+#define BIT_20		(1L << 20)
+#define BIT_19		(1L << 19)
+#define BIT_18		(1L << 18)
+#define BIT_17		(1L << 17)
+#define BIT_16		(1L << 16)
+#define BIT_15		(1L << 15)
+#define BIT_14		(1L << 14)
+#define BIT_13		(1L << 13)
+#define BIT_12		(1L << 12)
+#define BIT_11		(1L << 11)
+#define BIT_10		(1L << 10)
+#define BIT_9		(1L << 9)
+#define BIT_8		(1L << 8)
+#define BIT_7		(1L << 7)
+#define BIT_6		(1L << 6)
+#define BIT_5		(1L << 5)
+#define BIT_4		(1L << 4)
+#define BIT_3		(1L << 3)
+#define BIT_2		(1L << 2)
+#define BIT_1		(1L << 1)
+#define BIT_0		1L
+
+#define BIT_15S		(1U << 15)
+#define BIT_14S		(1 << 14)
+#define BIT_13S		(1 << 13)
+#define BIT_12S		(1 << 12)
+#define BIT_11S		(1 << 11)
+#define BIT_10S		(1 << 10)
+#define BIT_9S		(1 << 9)
+#define BIT_8S		(1 << 8)
+#define BIT_7S 		(1 << 7)
+#define BIT_6S		(1 << 6)
+#define BIT_5S		(1 << 5)
+#define BIT_4S		(1 << 4)
+#define BIT_3S		(1 << 3)
+#define BIT_2S		(1 << 2)
+#define BIT_1S		(1 << 1)
+#define BIT_0S		1
+
+#define SHIFT31(x)	((x) << 31)
+#define SHIFT30(x)	((x) << 30)
+#define SHIFT29(x)	((x) << 29)
+#define SHIFT28(x)	((x) << 28)
+#define SHIFT27(x)	((x) << 27)
+#define SHIFT26(x)	((x) << 26)
+#define SHIFT25(x)	((x) << 25)
+#define SHIFT24(x)	((x) << 24)
+#define SHIFT23(x)	((x) << 23)
+#define SHIFT22(x)	((x) << 22)
+#define SHIFT21(x)	((x) << 21)
+#define SHIFT20(x)	((x) << 20)
+#define SHIFT19(x)	((x) << 19)
+#define SHIFT18(x)	((x) << 18)
+#define SHIFT17(x)	((x) << 17)
+#define SHIFT16(x)	((x) << 16)
+#define SHIFT15(x)	((x) << 15)
+#define SHIFT14(x)	((x) << 14)
+#define SHIFT13(x)	((x) << 13)
+#define SHIFT12(x)	((x) << 12)
+#define SHIFT11(x)	((x) << 11)
+#define SHIFT10(x)	((x) << 10)
+#define SHIFT9(x)	((x) << 9)
+#define SHIFT8(x)	((x) << 8)
+#define SHIFT7(x)	((x) << 7)
+#define SHIFT6(x)	((x) << 6)
+#define SHIFT5(x)	((x) << 5)
+#define SHIFT4(x)	((x) << 4)
+#define SHIFT3(x)	((x) << 3)
+#define SHIFT2(x)	((x) << 2)
+#define SHIFT1(x)	((x) << 1)
+#define SHIFT0(x)	((x) << 0)
+
+/*
+ * Configuration Space header
+ * Since this module is used for different OS', those may be
+ * duplicate on some of them (e.g. Linux). But to keep the
+ * common source, we have to live with this...
+ */
+#define PCI_VENDOR_ID	0x00	/* 16 bit	Vendor ID */
+#define PCI_DEVICE_ID	0x02	/* 16 bit	Device ID */
+#define PCI_COMMAND		0x04	/* 16 bit	Command */
+#define PCI_STATUS		0x06	/* 16 bit	Status */
+#define PCI_REV_ID		0x08	/*  8 bit	Revision ID */
+#define PCI_CLASS_CODE	0x09	/* 24 bit	Class Code */
+#define PCI_CACHE_LSZ	0x0c	/*  8 bit	Cache Line Size */
+#define PCI_LAT_TIM		0x0d	/*  8 bit	Latency Timer */
+#define PCI_HEADER_T	0x0e	/*  8 bit	Header Type */
+#define PCI_BIST		0x0f	/*  8 bit	Built-in selftest */
+#define PCI_BASE_1ST	0x10	/* 32 bit	1st Base address */
+#define PCI_BASE_2ND	0x14	/* 32 bit	2nd Base address */
+	/* Byte 0x18..0x2b:	reserved */
+#define PCI_SUB_VID		0x2c	/* 16 bit	Subsystem Vendor ID */
+#define PCI_SUB_ID		0x2e	/* 16 bit	Subsystem ID */
+#define PCI_BASE_ROM	0x30	/* 32 bit	Expansion ROM Base Address */
+#define PCI_CAP_PTR		0x34	/*  8 bit 	Capabilities Ptr */
+	/* Byte 0x35..0x3b:	reserved */
+#define PCI_IRQ_LINE	0x3c	/*  8 bit	Interrupt Line */
+#define PCI_IRQ_PIN		0x3d	/*  8 bit	Interrupt Pin */
+#define PCI_MIN_GNT		0x3e	/*  8 bit	Min_Gnt */
+#define PCI_MAX_LAT		0x3f	/*  8 bit	Max_Lat */
+	/* Device Dependent Region */
+#define PCI_OUR_REG_1	0x40	/* 32 bit 	Our Register 1 */
+#define PCI_OUR_REG_2	0x44	/* 32 bit 	Our Register 2 */
+	/* Power Management Region */
+#define PCI_PM_CAP_ID	0x48	/*  8 bit 	Power Management Cap. ID */
+#define PCI_PM_NITEM	0x49	/*  8 bit 	Next Item Ptr */
+#define PCI_PM_CAP_REG	0x4a	/* 16 bit 	Power Management Capabilities */
+#define PCI_PM_CTL_STS	0x4c	/* 16 bit 	Power Manag. Control/Status */
+	/* Byte 0x4e:	reserved */
+#define PCI_PM_DAT_REG	0x4f	/*  8 bit 	Power Manag. Data Register */
+	/* VPD Region */
+#define PCI_VPD_CAP_ID	0x50	/*  8 bit 	VPD Cap. ID */
+#define PCI_VPD_NITEM	0x51	/*  8 bit 	Next Item Ptr */
+#define PCI_VPD_ADR_REG	0x52	/* 16 bit 	VPD Address Register */
+#define PCI_VPD_DAT_REG	0x54	/* 32 bit 	VPD Data Register */
+	/* Byte 0x58..0x59:	reserved */
+#define PCI_SER_LD_CTRL	0x5a	/* 16 bit 	SEEPROM Loader Ctrl (YUKON only) */
+	/* Byte 0x5c..0xff:	reserved */
+
+/*
+ * I2C Address (PCI Config)
+ *
+ * Note: The temperature and voltage sensors are relocated on a different
+ *	 I2C bus.
+ */
+#define I2C_ADDR_VPD	0xa0	/* I2C address for the VPD EEPROM */
+
+/*
+ * Define Bits and Values of the registers
+ */
+/*	PCI_COMMAND	16 bit	Command */
+								/* Bit 15..11:	reserved */
+#define PCI_INT_DIS		BIT_10S		/* Interrupt INTx# disable (PCI 2.3) */
+#define PCI_FBTEN		BIT_9S		/* Fast Back-To-Back enable */
+#define PCI_SERREN		BIT_8S		/* SERR enable */
+#define PCI_ADSTEP		BIT_7S		/* Address Stepping */
+#define PCI_PERREN		BIT_6S		/* Parity Report Response enable */
+#define PCI_VGA_SNOOP	BIT_5S		/* VGA palette snoop */
+#define PCI_MWIEN		BIT_4S		/* Memory write an inv cycl ena */
+#define PCI_SCYCEN		BIT_3S		/* Special Cycle enable */
+#define PCI_BMEN		BIT_2S		/* Bus Master enable */
+#define PCI_MEMEN		BIT_1S		/* Memory Space Access enable */
+#define PCI_IOEN		BIT_0S		/* I/O Space Access enable */
+
+#define PCI_COMMAND_VAL	(PCI_FBTEN | PCI_SERREN | PCI_PERREN | PCI_MWIEN |\
+						 PCI_BMEN | PCI_MEMEN | PCI_IOEN)
+
+/*	PCI_STATUS	16 bit	Status */
+#define PCI_PERR		BIT_15S		/* Parity Error */
+#define PCI_SERR		BIT_14S		/* Signaled SERR */
+#define PCI_RMABORT		BIT_13S		/* Received Master Abort */
+#define PCI_RTABORT		BIT_12S		/* Received Target Abort */
+								/* Bit 11:	reserved */
+#define PCI_DEVSEL		(3<<9)		/* Bit 10.. 9:	DEVSEL Timing */
+#define PCI_DEV_FAST	(0<<9)		/*		fast */
+#define PCI_DEV_MEDIUM	(1<<9)		/*		medium */
+#define PCI_DEV_SLOW	(2<<9)		/*		slow */
+#define PCI_DATAPERR	BIT_8S		/* DATA Parity error detected */
+#define PCI_FB2BCAP		BIT_7S		/* Fast Back-to-Back Capability */
+#define PCI_UDF			BIT_6S		/* User Defined Features */
+#define PCI_66MHZCAP	BIT_5S		/* 66 MHz PCI bus clock capable */
+#define PCI_NEWCAP		BIT_4S		/* New cap. list implemented */
+#define PCI_INT_STAT	BIT_3S		/* Interrupt INTx# Status (PCI 2.3) */
+								/* Bit  2.. 0:	reserved */
+
+#define PCI_ERRBITS	(PCI_PERR | PCI_SERR | PCI_RMABORT | PCI_RTABORT |\
+			PCI_DATAPERR)
+
+/*	PCI_CLASS_CODE	24 bit	Class Code */
+/*	Byte 2:		Base Class		(02) */
+/*	Byte 1:		SubClass		(00) */
+/*	Byte 0:		Programming Interface	(00) */
+
+/*	PCI_CACHE_LSZ	8 bit	Cache Line Size */
+/*	Possible values: 0,2,4,8,16,32,64,128	*/
+
+/*	PCI_HEADER_T	8 bit	Header Type */
+#define PCI_HD_MF_DEV	BIT_7S	/* 0= single, 1= multi-func dev */
+#define PCI_HD_TYPE		0x7f	/* Bit 6..0:	Header Layout 0= normal */
+
+/*	PCI_BIST	8 bit	Built-in selftest */
+/*	Built-in Self test not supported (optional) */
+
+/*	PCI_BASE_1ST	32 bit	1st Base address */
+#define PCI_MEMSIZE		0x4000L		/* use 16 kB Memory Base */
+#define PCI_MEMBASE_MSK 0xffffc000L	/* Bit 31..14:	Memory Base Address */
+#define PCI_MEMSIZE_MSK 0x00003ff0L	/* Bit 13.. 4:	Memory Size Req. */
+#define PCI_PREFEN		BIT_3		/* Prefetchable */
+#define PCI_MEM_TYP		(3L<<2)		/* Bit	2.. 1:	Memory Type */
+#define PCI_MEM32BIT	(0L<<1)		/* Base addr anywhere in 32 Bit range */
+#define PCI_MEM1M		(1L<<1)		/* Base addr below 1 MegaByte */
+#define PCI_MEM64BIT	(2L<<1)		/* Base addr anywhere in 64 Bit range */
+#define PCI_MEMSPACE	BIT_0		/* Memory Space Indicator */
+
+/*	PCI_BASE_2ND	32 bit	2nd Base address */
+#define PCI_IOBASE		0xffffff00L	/* Bit 31.. 8:	I/O Base address */
+#define PCI_IOSIZE		0x000000fcL	/* Bit	7.. 2:	I/O Size Requirements */
+									/* Bit	1:	reserved */
+#define PCI_IOSPACE		BIT_0		/* I/O Space Indicator */
+
+/*	PCI_BASE_ROM	32 bit	Expansion ROM Base Address */
+#define PCI_ROMBASE_MSK	0xfffe0000L	/* Bit 31..17:	ROM Base address */
+#define PCI_ROMBASE_SIZ	(0x1cL<<14)	/* Bit 16..14:	Treat as Base or Size */
+#define PCI_ROMSIZE		(0x38L<<11)	/* Bit 13..11:	ROM Size Requirements */
+									/* Bit 10.. 1:	reserved */
+#define PCI_ROMEN		BIT_0		/* Address Decode enable */
+
+/* Device Dependent Region */
+/*	PCI_OUR_REG_1		32 bit	Our Register 1 */
+									/* Bit 31..29:	reserved */
+#define PCI_PHY_COMA	BIT_28		/* Set PHY to Coma Mode (YUKON only) */
+#define PCI_TEST_CAL	BIT_27		/* Test PCI buffer calib. (YUKON only) */
+#define PCI_EN_CAL		BIT_26		/* Enable PCI buffer calib. (YUKON only) */
+#define PCI_VIO			BIT_25		/* PCI I/O Voltage, 0 = 3.3V, 1 = 5V */
+#define PCI_DIS_BOOT	BIT_24		/* Disable BOOT via ROM */
+#define PCI_EN_IO		BIT_23		/* Mapping to I/O space */
+#define PCI_EN_FPROM	BIT_22		/* Enable FLASH mapping to memory */
+									/*		1 = Map Flash to memory */
+									/*		0 = Disable addr. dec */
+#define PCI_PAGESIZE	(3L<<20)	/* Bit 21..20:	FLASH Page Size	*/
+#define PCI_PAGE_16		(0L<<20)	/*		16 k pages	*/
+#define PCI_PAGE_32K	(1L<<20)	/*		32 k pages	*/
+#define PCI_PAGE_64K	(2L<<20)	/*		64 k pages	*/
+#define PCI_PAGE_128K	(3L<<20)	/*		128 k pages	*/
+									/* Bit 19:	reserved	*/
+#define PCI_PAGEREG		(7L<<16)	/* Bit 18..16:	Page Register	*/
+#define PCI_NOTAR		BIT_15		/* No turnaround cycle */
+#define PCI_FORCE_BE	BIT_14		/* Assert all BEs on MR */
+#define PCI_DIS_MRL		BIT_13		/* Disable Mem Read Line */
+#define PCI_DIS_MRM		BIT_12		/* Disable Mem Read Multiple */
+#define PCI_DIS_MWI		BIT_11		/* Disable Mem Write & Invalidate */
+#define PCI_DISC_CLS	BIT_10		/* Disc: cacheLsz bound */
+#define PCI_BURST_DIS	BIT_9		/* Burst Disable */
+#define PCI_DIS_PCI_CLK	BIT_8		/* Disable PCI clock driving */
+#define PCI_SKEW_DAS	(0xfL<<4)	/* Bit	7.. 4:	Skew Ctrl, DAS Ext */
+#define PCI_SKEW_BASE	0xfL		/* Bit	3.. 0:	Skew Ctrl, Base	*/
+
+
+/*	PCI_OUR_REG_2		32 bit	Our Register 2 */
+#define PCI_VPD_WR_THR	(0xffL<<24)	/* Bit 31..24:	VPD Write Threshold */
+#define PCI_DEV_SEL		(0x7fL<<17)	/* Bit 23..17:	EEPROM Device Select */
+#define PCI_VPD_ROM_SZ	(7L<<14)	/* Bit 16..14:	VPD ROM Size	*/
+									/* Bit 13..12:	reserved	*/
+#define PCI_PATCH_DIR	(0xfL<<8)	/* Bit 11.. 8:	Ext Patches dir 3..0 */
+#define PCI_PATCH_DIR_3	BIT_11
+#define PCI_PATCH_DIR_2	BIT_10
+#define PCI_PATCH_DIR_1	BIT_9
+#define PCI_PATCH_DIR_0	BIT_8
+#define PCI_EXT_PATCHS	(0xfL<<4)	/* Bit	7.. 4:	Extended Patches 3..0 */
+#define PCI_EXT_PATCH_3	BIT_7
+#define PCI_EXT_PATCH_2	BIT_6
+#define PCI_EXT_PATCH_1	BIT_5
+#define PCI_EXT_PATCH_0	BIT_4
+#define PCI_EN_DUMMY_RD	BIT_3		/* Enable Dummy Read */
+#define PCI_REV_DESC	BIT_2		/* Reverse Desc. Bytes */
+									/* Bit	1:	reserved */
+#define PCI_USEDATA64	BIT_0		/* Use 64Bit Data bus ext */
+
+
+/* Power Management Region */
+/*	PCI_PM_CAP_REG		16 bit	Power Management Capabilities */
+#define PCI_PME_SUP_MSK	(0x1f<<11)	/* Bit 15..11:	PM Event Support Mask */
+#define PCI_PME_D3C_SUP	BIT_15S		/* PME from D3cold Support (if Vaux) */
+#define PCI_PME_D3H_SUP	BIT_14S		/* PME from D3hot Support */
+#define PCI_PME_D2_SUP	BIT_13S		/* PME from D2 Support */
+#define PCI_PME_D1_SUP	BIT_12S		/* PME from D1 Support */
+#define PCI_PME_D0_SUP	BIT_11S		/* PME from D0 Support */
+#define PCI_PM_D2_SUP	BIT_10S		/* D2 Support in 33 MHz mode */
+#define PCI_PM_D1_SUP	BIT_9S		/* D1 Support */
+									/* Bit	8.. 6:	reserved */
+#define PCI_PM_DSI		BIT_5S		/* Device Specific Initialization */
+#define PCI_PM_APS		BIT_4S		/* Auxialiary Power Source */
+#define PCI_PME_CLOCK	BIT_3S		/* PM Event Clock */
+#define PCI_PM_VER_MSK		7		/* Bit	2.. 0:	PM PCI Spec. version */
+
+/*	PCI_PM_CTL_STS		16 bit	Power Management Control/Status */
+#define PCI_PME_STATUS	BIT_15S		/* PME Status (YUKON only) */
+#define PCI_PM_DAT_SCL	(3<<13)		/* Bit 14..13:	Data Reg. scaling factor */
+#define PCI_PM_DAT_SEL	(0xf<<9)	/* Bit 12.. 9:	PM data selector field */
+#define PCI_PME_EN		BIT_8S		/* Enable PME# generation (YUKON only) */
+									/* Bit	7.. 2:	reserved */
+#define PCI_PM_STATE_MSK	3		/* Bit	1.. 0:	Power Management State */
+
+#define PCI_PM_STATE_D0		0		/* D0:	Operational (default) */
+#define PCI_PM_STATE_D1		1		/* D1:	(YUKON only) */
+#define PCI_PM_STATE_D2		2		/* D2:	(YUKON only) */
+#define PCI_PM_STATE_D3 	3		/* D3:	HOT, Power Down and Reset */
+
+/* VPD Region */
+/*	PCI_VPD_ADR_REG		16 bit	VPD Address Register */
+#define PCI_VPD_FLAG	BIT_15S		/* starts VPD rd/wr cycle */
+#define PCI_VPD_ADR_MSK	0x7fffL		/* Bit 14.. 0:	VPD address mask */
+
+/*	Control Register File (Address Map) */
+
+/*
+ *	Bank 0
+ */
+#define B0_RAP			0x0000	/*  8 bit	Register Address Port */
+	/* 0x0001 - 0x0003:	reserved */
+#define B0_CTST			0x0004	/* 16 bit	Control/Status register */
+#define B0_LED			0x0006	/*  8 Bit	LED register */
+#define B0_POWER_CTRL	0x0007	/*  8 Bit	Power Control reg (YUKON only) */
+#define B0_ISRC			0x0008	/* 32 bit	Interrupt Source Register */
+#define B0_IMSK			0x000c	/* 32 bit	Interrupt Mask Register */
+#define B0_HWE_ISRC		0x0010	/* 32 bit	HW Error Interrupt Src Reg */
+#define B0_HWE_IMSK		0x0014	/* 32 bit	HW Error Interrupt Mask Reg */
+#define B0_SP_ISRC		0x0018	/* 32 bit	Special Interrupt Source Reg */
+	/* 0x001c:		reserved */
+
+/* B0 XMAC 1 registers (GENESIS only) */
+#define B0_XM1_IMSK		0x0020	/* 16 bit r/w	XMAC 1 Interrupt Mask Register*/
+	/* 0x0022 - 0x0027:	reserved */
+#define B0_XM1_ISRC		0x0028	/* 16 bit ro	XMAC 1 Interrupt Status Reg */
+	/* 0x002a - 0x002f:	reserved */
+#define B0_XM1_PHY_ADDR 0x0030	/* 16 bit r/w	XMAC 1 PHY Address Register */
+	/* 0x0032 - 0x0033:	reserved */
+#define B0_XM1_PHY_DATA 0x0034	/* 16 bit r/w	XMAC 1 PHY Data Register */
+	/* 0x0036 - 0x003f:	reserved */
+
+/* B0 XMAC 2 registers (GENESIS only) */
+#define B0_XM2_IMSK		0x0040	/* 16 bit r/w	XMAC 2 Interrupt Mask Register*/
+	/* 0x0042 - 0x0047:	reserved */
+#define B0_XM2_ISRC		0x0048	/* 16 bit ro	XMAC 2 Interrupt Status Reg */
+	/* 0x004a - 0x004f:	reserved */
+#define B0_XM2_PHY_ADDR 0x0050	/* 16 bit r/w	XMAC 2 PHY Address Register */
+	/* 0x0052 - 0x0053:	reserved */
+#define B0_XM2_PHY_DATA 0x0054	/* 16 bit r/w	XMAC 2 PHY Data Register */
+	/* 0x0056 - 0x005f:	reserved */
+
+/* BMU Control Status Registers */
+#define B0_R1_CSR		0x0060	/* 32 bit	BMU Ctrl/Stat Rx Queue 1 */
+#define B0_R2_CSR		0x0064	/* 32 bit	BMU Ctrl/Stat Rx Queue 2 */
+#define B0_XS1_CSR		0x0068	/* 32 bit	BMU Ctrl/Stat Sync Tx Queue 1 */
+#define B0_XA1_CSR		0x006c	/* 32 bit	BMU Ctrl/Stat Async Tx Queue 1*/
+#define B0_XS2_CSR		0x0070	/* 32 bit	BMU Ctrl/Stat Sync Tx Queue 2 */
+#define B0_XA2_CSR		0x0074	/* 32 bit	BMU Ctrl/Stat Async Tx Queue 2*/
+	/* 0x0078 - 0x007f:	reserved */
+
+/*
+ *	Bank 1
+ *	- completely empty (this is the RAP Block window)
+ *	Note: if RAP = 1 this page is reserved
+ */
+
+/*
+ *	Bank 2
+ */
+/* NA reg = 48 bit Network Address Register, 3x16 or 8x8 bit readable */
+#define B2_MAC_1		0x0100	/* NA reg	 MAC Address 1 */
+	/* 0x0106 - 0x0107:	reserved */
+#define B2_MAC_2		0x0108	/* NA reg	 MAC Address 2 */
+	/* 0x010e - 0x010f:	reserved */
+#define B2_MAC_3		0x0110	/* NA reg	 MAC Address 3 */
+	/* 0x0116 - 0x0117:	reserved */
+#define B2_CONN_TYP		0x0118	/*  8 bit	Connector type */
+#define B2_PMD_TYP		0x0119	/*  8 bit	PMD type */
+#define B2_MAC_CFG		0x011a	/*  8 bit	MAC Configuration / Chip Revision */
+#define B2_CHIP_ID		0x011b	/*  8 bit 	Chip Identification Number */
+	/* Eprom registers are currently of no use */
+#define B2_E_0			0x011c	/*  8 bit	EPROM Byte 0 (ext. SRAM size */
+#define B2_E_1			0x011d	/*  8 bit	EPROM Byte 1 (PHY type) */
+#define B2_E_2			0x011e	/*  8 bit	EPROM Byte 2 */
+#define B2_E_3			0x011f	/*  8 bit	EPROM Byte 3 */
+#define B2_FAR			0x0120	/* 32 bit	Flash-Prom Addr Reg/Cnt */
+#define B2_FDP			0x0124	/*  8 bit	Flash-Prom Data Port */
+	/* 0x0125 - 0x0127:	reserved */
+#define B2_LD_CTRL		0x0128	/*  8 bit	EPROM loader control register */
+#define B2_LD_TEST		0x0129	/*  8 bit	EPROM loader test register */
+	/* 0x012a - 0x012f:	reserved */
+#define B2_TI_INI		0x0130	/* 32 bit	Timer Init Value */
+#define B2_TI_VAL		0x0134	/* 32 bit	Timer Value */
+#define B2_TI_CTRL		0x0138	/*  8 bit	Timer Control */
+#define B2_TI_TEST		0x0139	/*  8 Bit	Timer Test */
+	/* 0x013a - 0x013f:	reserved */
+#define B2_IRQM_INI		0x0140	/* 32 bit	IRQ Moderation Timer Init Reg.*/
+#define B2_IRQM_VAL		0x0144	/* 32 bit	IRQ Moderation Timer Value */
+#define B2_IRQM_CTRL	0x0148	/*  8 bit	IRQ Moderation Timer Control */
+#define B2_IRQM_TEST	0x0149	/*  8 bit	IRQ Moderation Timer Test */
+#define B2_IRQM_MSK 	0x014c	/* 32 bit	IRQ Moderation Mask */
+#define B2_IRQM_HWE_MSK 0x0150	/* 32 bit	IRQ Moderation HW Error Mask */
+	/* 0x0154 - 0x0157:	reserved */
+#define B2_TST_CTRL1	0x0158	/*  8 bit	Test Control Register 1 */
+#define B2_TST_CTRL2	0x0159	/*  8 bit	Test Control Register 2 */
+	/* 0x015a - 0x015b:	reserved */
+#define B2_GP_IO		0x015c	/* 32 bit	General Purpose I/O Register */
+#define B2_I2C_CTRL		0x0160	/* 32 bit	I2C HW Control Register */
+#define B2_I2C_DATA		0x0164	/* 32 bit	I2C HW Data Register */
+#define B2_I2C_IRQ		0x0168	/* 32 bit	I2C HW IRQ Register */
+#define B2_I2C_SW		0x016c	/* 32 bit	I2C SW Port Register */
+
+/* Blink Source Counter (GENESIS only) */
+#define B2_BSC_INI		0x0170	/* 32 bit	Blink Source Counter Init Val */
+#define B2_BSC_VAL		0x0174	/* 32 bit	Blink Source Counter Value */
+#define B2_BSC_CTRL		0x0178	/*  8 bit	Blink Source Counter Control */
+#define B2_BSC_STAT		0x0179	/*  8 bit	Blink Source Counter Status */
+#define B2_BSC_TST		0x017a	/* 16 bit	Blink Source Counter Test Reg */
+	/* 0x017c - 0x017f:	reserved */
+
+/*
+ *	Bank 3
+ */
+/* RAM Random Registers */
+#define B3_RAM_ADDR		0x0180	/* 32 bit	RAM Address, to read or write */
+#define B3_RAM_DATA_LO	0x0184	/* 32 bit	RAM Data Word (low dWord) */
+#define B3_RAM_DATA_HI	0x0188	/* 32 bit	RAM Data Word (high dWord) */
+	/* 0x018c - 0x018f:	reserved */
+
+/* RAM Interface Registers */
+/*
+ * The HW-Spec. calls this registers Timeout Value 0..11. But this names are
+ * not usable in SW. Please notice these are NOT real timeouts, these are
+ * the number of qWords transferred continuously.
+ */
+#define B3_RI_WTO_R1	0x0190	/*  8 bit	WR Timeout Queue R1		(TO0) */
+#define B3_RI_WTO_XA1	0x0191	/*  8 bit	WR Timeout Queue XA1	(TO1) */
+#define B3_RI_WTO_XS1	0x0192	/*  8 bit	WR Timeout Queue XS1	(TO2) */
+#define B3_RI_RTO_R1	0x0193	/*  8 bit	RD Timeout Queue R1		(TO3) */
+#define B3_RI_RTO_XA1	0x0194	/*  8 bit	RD Timeout Queue XA1	(TO4) */
+#define B3_RI_RTO_XS1	0x0195	/*  8 bit	RD Timeout Queue XS1	(TO5) */
+#define B3_RI_WTO_R2	0x0196	/*  8 bit	WR Timeout Queue R2		(TO6) */
+#define B3_RI_WTO_XA2	0x0197	/*  8 bit	WR Timeout Queue XA2	(TO7) */
+#define B3_RI_WTO_XS2	0x0198	/*  8 bit	WR Timeout Queue XS2	(TO8) */
+#define B3_RI_RTO_R2	0x0199	/*  8 bit	RD Timeout Queue R2		(TO9) */
+#define B3_RI_RTO_XA2	0x019a	/*  8 bit	RD Timeout Queue XA2	(TO10)*/
+#define B3_RI_RTO_XS2	0x019b	/*  8 bit	RD Timeout Queue XS2	(TO11)*/
+#define B3_RI_TO_VAL	0x019c	/*  8 bit	Current Timeout Count Val */
+	/* 0x019d - 0x019f:	reserved */
+#define B3_RI_CTRL		0x01a0	/* 16 bit	RAM Interface Control Register */
+#define B3_RI_TEST		0x01a2	/*  8 bit	RAM Interface Test Register */
+	/* 0x01a3 - 0x01af:	reserved */
+
+/* MAC Arbiter Registers (GENESIS only) */
+/* these are the no. of qWord transferred continuously and NOT real timeouts */
+#define B3_MA_TOINI_RX1	0x01b0	/*  8 bit	Timeout Init Val Rx Path MAC 1 */
+#define B3_MA_TOINI_RX2	0x01b1	/*  8 bit	Timeout Init Val Rx Path MAC 2 */
+#define B3_MA_TOINI_TX1	0x01b2	/*  8 bit	Timeout Init Val Tx Path MAC 1 */
+#define B3_MA_TOINI_TX2	0x01b3	/*  8 bit	Timeout Init Val Tx Path MAC 2 */
+#define B3_MA_TOVAL_RX1	0x01b4	/*  8 bit	Timeout Value Rx Path MAC 1 */
+#define B3_MA_TOVAL_RX2	0x01b5	/*  8 bit	Timeout Value Rx Path MAC 1 */
+#define B3_MA_TOVAL_TX1	0x01b6	/*  8 bit	Timeout Value Tx Path MAC 2 */
+#define B3_MA_TOVAL_TX2	0x01b7	/*  8 bit	Timeout Value Tx Path MAC 2 */
+#define B3_MA_TO_CTRL	0x01b8	/* 16 bit	MAC Arbiter Timeout Ctrl Reg */
+#define B3_MA_TO_TEST	0x01ba	/* 16 bit	MAC Arbiter Timeout Test Reg */
+	/* 0x01bc - 0x01bf:	reserved */
+#define B3_MA_RCINI_RX1	0x01c0	/*  8 bit	Recovery Init Val Rx Path MAC 1 */
+#define B3_MA_RCINI_RX2	0x01c1	/*  8 bit	Recovery Init Val Rx Path MAC 2 */
+#define B3_MA_RCINI_TX1	0x01c2	/*  8 bit	Recovery Init Val Tx Path MAC 1 */
+#define B3_MA_RCINI_TX2	0x01c3	/*  8 bit	Recovery Init Val Tx Path MAC 2 */
+#define B3_MA_RCVAL_RX1	0x01c4	/*  8 bit	Recovery Value Rx Path MAC 1 */
+#define B3_MA_RCVAL_RX2	0x01c5	/*  8 bit	Recovery Value Rx Path MAC 1 */
+#define B3_MA_RCVAL_TX1	0x01c6	/*  8 bit	Recovery Value Tx Path MAC 2 */
+#define B3_MA_RCVAL_TX2	0x01c7	/*  8 bit	Recovery Value Tx Path MAC 2 */
+#define B3_MA_RC_CTRL	0x01c8	/* 16 bit	MAC Arbiter Recovery Ctrl Reg */
+#define B3_MA_RC_TEST	0x01ca	/* 16 bit	MAC Arbiter Recovery Test Reg */
+	/* 0x01cc - 0x01cf:	reserved */
+
+/* Packet Arbiter Registers (GENESIS only) */
+/* these are real timeouts */
+#define B3_PA_TOINI_RX1	0x01d0	/* 16 bit	Timeout Init Val Rx Path MAC 1 */
+	/* 0x01d2 - 0x01d3:	reserved */
+#define B3_PA_TOINI_RX2	0x01d4	/* 16 bit	Timeout Init Val Rx Path MAC 2 */
+	/* 0x01d6 - 0x01d7:	reserved */
+#define B3_PA_TOINI_TX1	0x01d8	/* 16 bit	Timeout Init Val Tx Path MAC 1 */
+	/* 0x01da - 0x01db:	reserved */
+#define B3_PA_TOINI_TX2	0x01dc	/* 16 bit	Timeout Init Val Tx Path MAC 2 */
+	/* 0x01de - 0x01df:	reserved */
+#define B3_PA_TOVAL_RX1	0x01e0	/* 16 bit	Timeout Val Rx Path MAC 1 */
+	/* 0x01e2 - 0x01e3:	reserved */
+#define B3_PA_TOVAL_RX2	0x01e4	/* 16 bit	Timeout Val Rx Path MAC 2 */
+	/* 0x01e6 - 0x01e7:	reserved */
+#define B3_PA_TOVAL_TX1	0x01e8	/* 16 bit	Timeout Val Tx Path MAC 1 */
+	/* 0x01ea - 0x01eb:	reserved */
+#define B3_PA_TOVAL_TX2	0x01ec	/* 16 bit	Timeout Val Tx Path MAC 2 */
+	/* 0x01ee - 0x01ef:	reserved */
+#define B3_PA_CTRL	0x01f0	/* 16 bit	Packet Arbiter Ctrl Register */
+#define B3_PA_TEST	0x01f2	/* 16 bit	Packet Arbiter Test Register */
+	/* 0x01f4 - 0x01ff:	reserved */
+
+/*
+ *	Bank 4 - 5
+ */
+/* Transmit Arbiter Registers MAC 1 and 2, use MR_ADDR() to access */
+#define TXA_ITI_INI		0x0200	/* 32 bit	Tx Arb Interval Timer Init Val*/
+#define TXA_ITI_VAL		0x0204	/* 32 bit	Tx Arb Interval Timer Value */
+#define TXA_LIM_INI		0x0208	/* 32 bit	Tx Arb Limit Counter Init Val */
+#define TXA_LIM_VAL		0x020c	/* 32 bit	Tx Arb Limit Counter Value */
+#define TXA_CTRL		0x0210	/*  8 bit	Tx Arbiter Control Register */
+#define TXA_TEST		0x0211	/*  8 bit	Tx Arbiter Test Register */
+#define TXA_STAT		0x0212	/*  8 bit	Tx Arbiter Status Register */
+	/* 0x0213 - 0x027f:	reserved */
+	/* 0x0280 - 0x0292:	MAC 2 */
+	/* 0x0213 - 0x027f:	reserved */
+
+/*
+ *	Bank 6
+ */
+/* External registers (GENESIS only) */
+#define B6_EXT_REG		0x0300
+
+/*
+ *	Bank 7
+ */
+/* This is a copy of the Configuration register file (lower half) */
+#define B7_CFG_SPC		0x0380
+
+/*
+ *	Bank 8 - 15
+ */
+/* Receive and Transmit Queue Registers, use Q_ADDR() to access */
+#define B8_Q_REGS		0x0400
+
+/* Queue Register Offsets, use Q_ADDR() to access */
+#define Q_D		0x00	/* 8*32	bit	Current Descriptor */
+#define Q_DA_L	0x20	/* 32 bit	Current Descriptor Address Low dWord */
+#define Q_DA_H	0x24	/* 32 bit	Current Descriptor Address High dWord */
+#define Q_AC_L	0x28	/* 32 bit	Current Address Counter Low dWord */
+#define Q_AC_H	0x2c	/* 32 bit	Current Address Counter High dWord */
+#define Q_BC	0x30	/* 32 bit	Current Byte Counter */
+#define Q_CSR	0x34	/* 32 bit	BMU Control/Status Register */
+#define Q_F		0x38	/* 32 bit	Flag Register */
+#define Q_T1	0x3c	/* 32 bit	Test Register 1 */
+#define Q_T1_TR	0x3c	/*  8 bit	Test Register 1 Transfer SM */
+#define Q_T1_WR	0x3d	/*  8 bit	Test Register 1 Write Descriptor SM */
+#define Q_T1_RD	0x3e	/*  8 bit	Test Register 1 Read Descriptor SM */
+#define Q_T1_SV	0x3f	/*  8 bit	Test Register 1 Supervisor SM */
+#define Q_T2	0x40	/* 32 bit	Test Register 2	*/
+#define Q_T3	0x44	/* 32 bit	Test Register 3	*/
+	/* 0x48 - 0x7f:	reserved */
+
+/*
+ *	Bank 16 - 23
+ */
+/* RAM Buffer Registers */
+#define B16_RAM_REGS	0x0800
+
+/* RAM Buffer Register Offsets, use RB_ADDR() to access */
+#define RB_START		0x00	/* 32 bit	RAM Buffer Start Address */
+#define RB_END			0x04	/* 32 bit	RAM Buffer End Address */
+#define RB_WP			0x08	/* 32 bit	RAM Buffer Write Pointer */
+#define RB_RP			0x0c	/* 32 bit	RAM Buffer Read Pointer */
+#define RB_RX_UTPP		0x10	/* 32 bit	Rx Upper Threshold, Pause Pack */
+#define RB_RX_LTPP		0x14	/* 32 bit	Rx Lower Threshold, Pause Pack */
+#define RB_RX_UTHP		0x18	/* 32 bit	Rx Upper Threshold, High Prio */
+#define RB_RX_LTHP		0x1c	/* 32 bit	Rx Lower Threshold, High Prio */
+	/* 0x10 - 0x1f:	reserved at Tx RAM Buffer Registers */
+#define RB_PC			0x20	/* 32 bit	RAM Buffer Packet Counter */
+#define RB_LEV			0x24	/* 32 bit	RAM Buffer Level Register */
+#define RB_CTRL			0x28	/*  8 bit	RAM Buffer Control Register */
+#define RB_TST1			0x29	/*  8 bit	RAM Buffer Test Register 1 */
+#define RB_TST2			0x2A	/*  8 bit	RAM Buffer Test Register 2 */
+	/* 0x2c - 0x7f:	reserved */
+
+/*
+ *	Bank 24
+ */
+/*
+ * Receive MAC FIFO, Receive LED, and Link_Sync regs (GENESIS only)
+ * use MR_ADDR() to access
+ */
+#define RX_MFF_EA		0x0c00	/* 32 bit	Receive MAC FIFO End Address */
+#define RX_MFF_WP		0x0c04	/* 32 bit 	Receive MAC FIFO Write Pointer */
+	/* 0x0c08 - 0x0c0b:	reserved */
+#define RX_MFF_RP		0x0c0c	/* 32 bit	Receive MAC FIFO Read Pointer */
+#define RX_MFF_PC		0x0c10	/* 32 bit	Receive MAC FIFO Packet Cnt */
+#define RX_MFF_LEV		0x0c14	/* 32 bit	Receive MAC FIFO Level */
+#define RX_MFF_CTRL1	0x0c18	/* 16 bit	Receive MAC FIFO Control Reg 1*/
+#define RX_MFF_STAT_TO	0x0c1a	/*  8 bit	Receive MAC Status Timeout */
+#define RX_MFF_TIST_TO	0x0c1b	/*  8 bit	Receive MAC Time Stamp Timeout */
+#define RX_MFF_CTRL2	0x0c1c	/*  8 bit	Receive MAC FIFO Control Reg 2*/
+#define RX_MFF_TST1		0x0c1d	/*  8 bit	Receive MAC FIFO Test Reg 1 */
+#define RX_MFF_TST2		0x0c1e	/*  8 bit	Receive MAC FIFO Test Reg 2 */
+	/* 0x0c1f:	reserved */
+#define RX_LED_INI		0x0c20	/* 32 bit	Receive LED Cnt Init Value */
+#define RX_LED_VAL		0x0c24	/* 32 bit	Receive LED Cnt Current Value */
+#define RX_LED_CTRL		0x0c28	/*  8 bit	Receive LED Cnt Control Reg */
+#define RX_LED_TST		0x0c29	/*  8 bit	Receive LED Cnt Test Register */
+	/* 0x0c2a - 0x0c2f:	reserved */
+#define LNK_SYNC_INI	0x0c30	/* 32 bit	Link Sync Cnt Init Value */
+#define LNK_SYNC_VAL	0x0c34	/* 32 bit	Link Sync Cnt Current Value */
+#define LNK_SYNC_CTRL	0x0c38	/*  8 bit	Link Sync Cnt Control Register */
+#define LNK_SYNC_TST	0x0c39	/*  8 bit	Link Sync Cnt Test Register */
+	/* 0x0c3a - 0x0c3b:	reserved */
+#define LNK_LED_REG		0x0c3c	/*  8 bit	Link LED Register */
+	/* 0x0c3d - 0x0c3f:	reserved */
+
+/* Receive GMAC FIFO (YUKON only), use MR_ADDR() to access */
+#define RX_GMF_EA		0x0c40	/* 32 bit	Rx GMAC FIFO End Address */
+#define RX_GMF_AF_THR	0x0c44	/* 32 bit	Rx GMAC FIFO Almost Full Thresh. */
+#define RX_GMF_CTRL_T	0x0c48	/* 32 bit	Rx GMAC FIFO Control/Test */
+#define RX_GMF_FL_MSK	0x0c4c	/* 32 bit	Rx GMAC FIFO Flush Mask */
+#define RX_GMF_FL_THR	0x0c50	/* 32 bit	Rx GMAC FIFO Flush Threshold */
+	/* 0x0c54 - 0x0c5f:	reserved */
+#define RX_GMF_WP		0x0c60	/* 32 bit 	Rx GMAC FIFO Write Pointer */
+	/* 0x0c64 - 0x0c67:	reserved */
+#define RX_GMF_WLEV		0x0c68	/* 32 bit 	Rx GMAC FIFO Write Level */
+	/* 0x0c6c - 0x0c6f:	reserved */
+#define RX_GMF_RP		0x0c70	/* 32 bit 	Rx GMAC FIFO Read Pointer */
+	/* 0x0c74 - 0x0c77:	reserved */
+#define RX_GMF_RLEV		0x0c78	/* 32 bit 	Rx GMAC FIFO Read Level */
+	/* 0x0c7c - 0x0c7f:	reserved */
+
+/*
+ *	Bank 25
+ */
+	/* 0x0c80 - 0x0cbf:	MAC 2 */
+	/* 0x0cc0 - 0x0cff:	reserved */
+
+/*
+ *	Bank 26
+ */
+/*
+ * Transmit MAC FIFO and Transmit LED Registers (GENESIS only),
+ * use MR_ADDR() to access
+ */
+#define TX_MFF_EA		0x0d00	/* 32 bit	Transmit MAC FIFO End Address */
+#define TX_MFF_WP		0x0d04	/* 32 bit 	Transmit MAC FIFO WR Pointer */
+#define TX_MFF_WSP		0x0d08	/* 32 bit	Transmit MAC FIFO WR Shadow Ptr */
+#define TX_MFF_RP		0x0d0c	/* 32 bit	Transmit MAC FIFO RD Pointer */
+#define TX_MFF_PC		0x0d10	/* 32 bit	Transmit MAC FIFO Packet Cnt */
+#define TX_MFF_LEV		0x0d14	/* 32 bit	Transmit MAC FIFO Level */
+#define TX_MFF_CTRL1	0x0d18	/* 16 bit	Transmit MAC FIFO Ctrl Reg 1 */
+#define TX_MFF_WAF		0x0d1a	/*  8 bit	Transmit MAC Wait after flush */
+	/* 0x0c1b:	reserved */
+#define TX_MFF_CTRL2	0x0d1c	/*  8 bit	Transmit MAC FIFO Ctrl Reg 2 */
+#define TX_MFF_TST1		0x0d1d	/*  8 bit	Transmit MAC FIFO Test Reg 1 */
+#define TX_MFF_TST2		0x0d1e	/*  8 bit	Transmit MAC FIFO Test Reg 2 */
+	/* 0x0d1f:	reserved */
+#define TX_LED_INI		0x0d20	/* 32 bit	Transmit LED Cnt Init Value */
+#define TX_LED_VAL		0x0d24	/* 32 bit	Transmit LED Cnt Current Val */
+#define TX_LED_CTRL		0x0d28	/*  8 bit	Transmit LED Cnt Control Reg */
+#define TX_LED_TST		0x0d29	/*  8 bit	Transmit LED Cnt Test Reg */
+	/* 0x0d2a - 0x0d3f:	reserved */
+
+/* Transmit GMAC FIFO (YUKON only), use MR_ADDR() to access */
+#define TX_GMF_EA		0x0d40	/* 32 bit	Tx GMAC FIFO End Address */
+#define TX_GMF_AE_THR	0x0d44	/* 32 bit	Tx GMAC FIFO Almost Empty Thresh.*/
+#define TX_GMF_CTRL_T	0x0d48	/* 32 bit	Tx GMAC FIFO Control/Test */
+	/* 0x0d4c - 0x0d5f:	reserved */
+#define TX_GMF_WP		0x0d60	/* 32 bit 	Tx GMAC FIFO Write Pointer */
+#define TX_GMF_WSP		0x0d64	/* 32 bit 	Tx GMAC FIFO Write Shadow Ptr. */
+#define TX_GMF_WLEV		0x0d68	/* 32 bit 	Tx GMAC FIFO Write Level */
+	/* 0x0d6c - 0x0d6f:	reserved */
+#define TX_GMF_RP		0x0d70	/* 32 bit 	Tx GMAC FIFO Read Pointer */
+#define TX_GMF_RSTP		0x0d74	/* 32 bit 	Tx GMAC FIFO Restart Pointer */
+#define TX_GMF_RLEV		0x0d78	/* 32 bit 	Tx GMAC FIFO Read Level */
+	/* 0x0d7c - 0x0d7f:	reserved */
+
+/*
+ *	Bank 27
+ */
+	/* 0x0d80 - 0x0dbf:	MAC 2 */
+	/* 0x0daa - 0x0dff:	reserved */
+
+/*
+ *	Bank 28
+ */
+/* Descriptor Poll Timer Registers */
+#define B28_DPT_INI		0x0e00	/* 24 bit	Descriptor Poll Timer Init Val */
+#define B28_DPT_VAL		0x0e04	/* 24 bit	Descriptor Poll Timer Curr Val */
+#define B28_DPT_CTRL	0x0e08	/*  8 bit	Descriptor Poll Timer Ctrl Reg */
+	/* 0x0e09:	reserved */
+#define B28_DPT_TST		0x0e0a	/*  8 bit	Descriptor Poll Timer Test Reg */
+	/* 0x0e0b:	reserved */
+
+/* Time Stamp Timer Registers (YUKON only) */
+	/* 0x0e10:	reserved */
+#define GMAC_TI_ST_VAL	0x0e14	/* 32 bit	Time Stamp Timer Curr Val */
+#define GMAC_TI_ST_CTRL	0x0e18	/*  8 bit	Time Stamp Timer Ctrl Reg */
+	/* 0x0e19:	reserved */
+#define GMAC_TI_ST_TST	0x0e1a	/*  8 bit	Time Stamp Timer Test Reg */
+	/* 0x0e1b - 0x0e7f:	reserved */
+
+/*
+ *	Bank 29
+ */
+	/* 0x0e80 - 0x0efc:	reserved */
+
+/*
+ *	Bank 30
+ */
+/* GMAC and GPHY Control Registers (YUKON only) */
+#define GMAC_CTRL		0x0f00	/* 32 bit	GMAC Control Reg */
+#define GPHY_CTRL		0x0f04	/* 32 bit	GPHY Control Reg */
+#define GMAC_IRQ_SRC	0x0f08	/*  8 bit	GMAC Interrupt Source Reg */
+	/* 0x0f09 - 0x0f0b:	reserved */
+#define GMAC_IRQ_MSK	0x0f0c	/*  8 bit	GMAC Interrupt Mask Reg */
+	/* 0x0f0d - 0x0f0f:	reserved */
+#define GMAC_LINK_CTRL	0x0f10	/* 16 bit	Link Control Reg */
+	/* 0x0f14 - 0x0f1f:	reserved */
+
+/* Wake-up Frame Pattern Match Control Registers (YUKON only) */
+
+#define WOL_REG_OFFS	0x20	/* HW-Bug: Address is + 0x20 against spec. */
+
+#define WOL_CTRL_STAT	0x0f20	/* 16 bit	WOL Control/Status Reg */
+#define WOL_MATCH_CTL	0x0f22	/*  8 bit	WOL Match Control Reg */
+#define WOL_MATCH_RES	0x0f23	/*  8 bit	WOL Match Result Reg */
+#define WOL_MAC_ADDR_LO	0x0f24	/* 32 bit	WOL MAC Address Low */
+#define WOL_MAC_ADDR_HI	0x0f28	/* 16 bit	WOL MAC Address High */
+#define WOL_PATT_RPTR	0x0f2c	/*  8 bit	WOL Pattern Read Ptr */
+
+/* use this macro to access above registers */
+#define WOL_REG(Reg)	((Reg) + (pAC->GIni.GIWolOffs))
+
+
+/* WOL Pattern Length Registers (YUKON only) */
+
+#define WOL_PATT_LEN_LO	0x0f30		/* 32 bit	WOL Pattern Length 3..0 */
+#define WOL_PATT_LEN_HI	0x0f34		/* 24 bit	WOL Pattern Length 6..4 */
+
+/* WOL Pattern Counter Registers (YUKON only) */
+
+#define WOL_PATT_CNT_0	0x0f38		/* 32 bit	WOL Pattern Counter 3..0 */
+#define WOL_PATT_CNT_4	0x0f3c		/* 24 bit	WOL Pattern Counter 6..4 */
+	/* 0x0f40 - 0x0f7f:	reserved */
+
+/*
+ *	Bank 31
+ */
+/* 0x0f80 - 0x0fff:	reserved */
+
+/*
+ *	Bank 32	- 33
+ */
+#define WOL_PATT_RAM_1	0x1000	/*  WOL Pattern RAM Link 1 */
+
+/*
+ *	Bank 0x22 - 0x3f
+ */
+/* 0x1100 - 0x1fff:	reserved */
+
+/*
+ *	Bank 0x40 - 0x4f
+ */
+#define BASE_XMAC_1		0x2000	/* XMAC 1 registers */
+
+/*
+ *	Bank 0x50 - 0x5f
+ */
+
+#define BASE_GMAC_1		0x2800	/* GMAC 1 registers */
+
+/*
+ *	Bank 0x60 - 0x6f
+ */
+#define BASE_XMAC_2		0x3000	/* XMAC 2 registers */
+
+/*
+ *	Bank 0x70 - 0x7f
+ */
+#define BASE_GMAC_2		0x3800	/* GMAC 2 registers */
+
+/*
+ *	Control Register Bit Definitions:
+ */
+/*	B0_RAP		8 bit	Register Address Port */
+								/* Bit 7:	reserved */
+#define RAP_RAP			0x3f	/* Bit 6..0:	0 = block 0,..,6f = block 6f */
+
+/*	B0_CTST			16 bit	Control/Status register */
+								/* Bit 15..14:	reserved */
+#define CS_CLK_RUN_HOT	BIT_13S		/* CLK_RUN hot m. (YUKON-Lite only) */
+#define CS_CLK_RUN_RST	BIT_12S		/* CLK_RUN reset  (YUKON-Lite only) */
+#define CS_CLK_RUN_ENA	BIT_11S		/* CLK_RUN enable (YUKON-Lite only) */
+#define CS_VAUX_AVAIL	BIT_10S		/* VAUX available (YUKON only) */
+#define CS_BUS_CLOCK	BIT_9S		/* Bus Clock 0/1 = 33/66 MHz */
+#define CS_BUS_SLOT_SZ	BIT_8S		/* Slot Size 0/1 = 32/64 bit slot */
+#define CS_ST_SW_IRQ	BIT_7S		/* Set IRQ SW Request */
+#define CS_CL_SW_IRQ	BIT_6S		/* Clear IRQ SW Request */
+#define CS_STOP_DONE	BIT_5S		/* Stop Master is finished */
+#define CS_STOP_MAST	BIT_4S		/* Command Bit to stop the master */
+#define CS_MRST_CLR		BIT_3S		/* Clear Master reset	*/
+#define CS_MRST_SET		BIT_2S		/* Set Master reset	*/
+#define CS_RST_CLR		BIT_1S		/* Clear Software reset	*/
+#define CS_RST_SET		BIT_0S		/* Set   Software reset	*/
+
+/*	B0_LED			 8 Bit	LED register */
+								/* Bit  7.. 2:	reserved */
+#define LED_STAT_ON		BIT_1S		/* Status LED on	*/
+#define LED_STAT_OFF	BIT_0S		/* Status LED off	*/
+
+/*	B0_POWER_CTRL	 8 Bit	Power Control reg (YUKON only) */
+#define PC_VAUX_ENA		BIT_7		/* Switch VAUX Enable  */
+#define PC_VAUX_DIS		BIT_6       /* Switch VAUX Disable */
+#define PC_VCC_ENA		BIT_5       /* Switch VCC Enable  */
+#define PC_VCC_DIS		BIT_4       /* Switch VCC Disable */
+#define PC_VAUX_ON		BIT_3       /* Switch VAUX On  */
+#define PC_VAUX_OFF		BIT_2       /* Switch VAUX Off */
+#define PC_VCC_ON		BIT_1       /* Switch VCC On  */
+#define PC_VCC_OFF		BIT_0       /* Switch VCC Off */
+
+/*	B0_ISRC			32 bit	Interrupt Source Register */
+/*	B0_IMSK			32 bit	Interrupt Mask Register */
+/*	B0_SP_ISRC		32 bit	Special Interrupt Source Reg */
+/*	B2_IRQM_MSK 	32 bit	IRQ Moderation Mask */
+#define IS_ALL_MSK		0xbfffffffUL	/* All Interrupt bits */
+#define IS_HW_ERR		BIT_31		/* Interrupt HW Error */
+								/* Bit 30:	reserved */
+#define IS_PA_TO_RX1	BIT_29		/* Packet Arb Timeout Rx1 */
+#define IS_PA_TO_RX2	BIT_28		/* Packet Arb Timeout Rx2 */
+#define IS_PA_TO_TX1	BIT_27		/* Packet Arb Timeout Tx1 */
+#define IS_PA_TO_TX2	BIT_26		/* Packet Arb Timeout Tx2 */
+#define IS_I2C_READY	BIT_25		/* IRQ on end of I2C Tx */
+#define IS_IRQ_SW		BIT_24		/* SW forced IRQ	*/
+#define IS_EXT_REG		BIT_23		/* IRQ from LM80 or PHY (GENESIS only) */
+									/* IRQ from PHY (YUKON only) */
+#define IS_TIMINT		BIT_22		/* IRQ from Timer	*/
+#define IS_MAC1			BIT_21		/* IRQ from MAC 1	*/
+#define IS_LNK_SYNC_M1	BIT_20		/* Link Sync Cnt wrap MAC 1 */
+#define IS_MAC2			BIT_19		/* IRQ from MAC 2	*/
+#define IS_LNK_SYNC_M2	BIT_18		/* Link Sync Cnt wrap MAC 2 */
+/* Receive Queue 1 */
+#define IS_R1_B			BIT_17		/* Q_R1 End of Buffer */
+#define IS_R1_F			BIT_16		/* Q_R1 End of Frame */
+#define IS_R1_C			BIT_15		/* Q_R1 Encoding Error */
+/* Receive Queue 2 */
+#define IS_R2_B			BIT_14		/* Q_R2 End of Buffer */
+#define IS_R2_F			BIT_13		/* Q_R2 End of Frame */
+#define IS_R2_C			BIT_12		/* Q_R2 Encoding Error */
+/* Synchronous Transmit Queue 1 */
+#define IS_XS1_B		BIT_11		/* Q_XS1 End of Buffer */
+#define IS_XS1_F		BIT_10		/* Q_XS1 End of Frame */
+#define IS_XS1_C		BIT_9		/* Q_XS1 Encoding Error */
+/* Asynchronous Transmit Queue 1 */
+#define IS_XA1_B		BIT_8		/* Q_XA1 End of Buffer */
+#define IS_XA1_F		BIT_7		/* Q_XA1 End of Frame */
+#define IS_XA1_C		BIT_6		/* Q_XA1 Encoding Error */
+/* Synchronous Transmit Queue 2 */
+#define IS_XS2_B		BIT_5		/* Q_XS2 End of Buffer */
+#define IS_XS2_F		BIT_4		/* Q_XS2 End of Frame */
+#define IS_XS2_C		BIT_3		/* Q_XS2 Encoding Error */
+/* Asynchronous Transmit Queue 2 */
+#define IS_XA2_B		BIT_2		/* Q_XA2 End of Buffer */
+#define IS_XA2_F		BIT_1		/* Q_XA2 End of Frame */
+#define IS_XA2_C		BIT_0		/* Q_XA2 Encoding Error */
+
+
+/*	B0_HWE_ISRC		32 bit	HW Error Interrupt Src Reg */
+/*	B0_HWE_IMSK		32 bit	HW Error Interrupt Mask Reg */
+/*	B2_IRQM_HWE_MSK	32 bit	IRQ Moderation HW Error Mask */
+#define IS_ERR_MSK		0x00000fffL	/* 		All Error bits */
+								/* Bit 31..14:	reserved */
+#define IS_IRQ_TIST_OV	BIT_13	/* Time Stamp Timer Overflow (YUKON only) */
+#define IS_IRQ_SENSOR	BIT_12	/* IRQ from Sensor (YUKON only) */
+#define IS_IRQ_MST_ERR	BIT_11	/* IRQ master error detected */
+#define IS_IRQ_STAT		BIT_10	/* IRQ status exception */
+#define IS_NO_STAT_M1	BIT_9	/* No Rx Status from MAC 1 */
+#define IS_NO_STAT_M2	BIT_8	/* No Rx Status from MAC 2 */
+#define IS_NO_TIST_M1	BIT_7	/* No Time Stamp from MAC 1 */
+#define IS_NO_TIST_M2	BIT_6	/* No Time Stamp from MAC 2 */
+#define IS_RAM_RD_PAR	BIT_5	/* RAM Read  Parity Error */
+#define IS_RAM_WR_PAR	BIT_4	/* RAM Write Parity Error */
+#define IS_M1_PAR_ERR	BIT_3	/* MAC 1 Parity Error */
+#define IS_M2_PAR_ERR	BIT_2	/* MAC 2 Parity Error */
+#define IS_R1_PAR_ERR	BIT_1	/* Queue R1 Parity Error */
+#define IS_R2_PAR_ERR	BIT_0	/* Queue R2 Parity Error */
+
+/*	B2_CONN_TYP		 8 bit	Connector type */
+/*	B2_PMD_TYP		 8 bit	PMD type */
+/*	Values of connector and PMD type comply to SysKonnect internal std */
+
+/*	B2_MAC_CFG		 8 bit	MAC Configuration / Chip Revision */
+#define CFG_CHIP_R_MSK	(0xf<<4)	/* Bit 7.. 4: Chip Revision */
+									/* Bit 3.. 2:	reserved */
+#define CFG_DIS_M2_CLK	BIT_1S		/* Disable Clock for 2nd MAC */
+#define CFG_SNG_MAC		BIT_0S		/* MAC Config: 0=2 MACs / 1=1 MAC*/
+
+/*	B2_CHIP_ID		 8 bit 	Chip Identification Number */
+#define CHIP_ID_GENESIS		0x0a	/* Chip ID for GENESIS */
+#define CHIP_ID_YUKON		0xb0	/* Chip ID for YUKON */
+#define CHIP_ID_YUKON_LITE	0xb1	/* Chip ID for YUKON-Lite (Rev. A1-A3) */
+#define CHIP_ID_YUKON_LP	0xb2	/* Chip ID for YUKON-LP */
+
+#define CHIP_REV_YU_LITE_A1	3		/* Chip Rev. for YUKON-Lite A1,A2 */
+#define CHIP_REV_YU_LITE_A3	7		/* Chip Rev. for YUKON-Lite A3 */
+
+/*	B2_FAR			32 bit	Flash-Prom Addr Reg/Cnt */
+#define FAR_ADDR		0x1ffffL	/* Bit 16.. 0:	FPROM Address mask */
+
+/*	B2_LD_CTRL		 8 bit	EPROM loader control register */
+/*	Bits are currently reserved */
+
+/*	B2_LD_TEST		 8 bit	EPROM loader test register */
+								/* Bit 7.. 4:	reserved */
+#define LD_T_ON			BIT_3S	/* Loader Test mode on */
+#define LD_T_OFF		BIT_2S	/* Loader Test mode off */
+#define LD_T_STEP		BIT_1S	/* Decrement FPROM addr. Counter */
+#define LD_START		BIT_0S	/* Start loading FPROM */
+
+/*
+ *	Timer Section
+ */
+/*	B2_TI_CTRL		 8 bit	Timer control */
+/*	B2_IRQM_CTRL	 8 bit	IRQ Moderation Timer Control */
+								/* Bit 7.. 3:	reserved */
+#define TIM_START		BIT_2S	/* Start Timer */
+#define TIM_STOP		BIT_1S	/* Stop  Timer */
+#define TIM_CLR_IRQ		BIT_0S	/* Clear Timer IRQ (!IRQM) */
+
+/*	B2_TI_TEST		 8 Bit	Timer Test */
+/*	B2_IRQM_TEST	 8 bit	IRQ Moderation Timer Test */
+/*	B28_DPT_TST		 8 bit	Descriptor Poll Timer Test Reg */
+								/* Bit 7.. 3:	reserved */
+#define TIM_T_ON		BIT_2S	/* Test mode on */
+#define TIM_T_OFF		BIT_1S	/* Test mode off */
+#define TIM_T_STEP		BIT_0S	/* Test step */
+
+/*	B28_DPT_INI	32 bit	Descriptor Poll Timer Init Val */
+/*	B28_DPT_VAL	32 bit	Descriptor Poll Timer Curr Val */
+								/* Bit 31..24:	reserved */
+#define DPT_MSK		0x00ffffffL	/* Bit 23.. 0:	Desc Poll Timer Bits */
+
+/*	B28_DPT_CTRL	 8 bit	Descriptor Poll Timer Ctrl Reg */
+								/* Bit  7.. 2:	reserved */
+#define DPT_START		BIT_1S	/* Start Descriptor Poll Timer */
+#define DPT_STOP		BIT_0S	/* Stop  Descriptor Poll Timer */
+
+/*	B2_E_3			 8 bit 	lower 4 bits used for HW self test result */
+#define B2_E3_RES_MASK	0x0f
+
+/*	B2_TST_CTRL1	 8 bit	Test Control Register 1 */
+#define TST_FRC_DPERR_MR	BIT_7S	/* force DATAPERR on MST RD */
+#define TST_FRC_DPERR_MW	BIT_6S	/* force DATAPERR on MST WR */
+#define TST_FRC_DPERR_TR	BIT_5S	/* force DATAPERR on TRG RD */
+#define TST_FRC_DPERR_TW	BIT_4S	/* force DATAPERR on TRG WR */
+#define TST_FRC_APERR_M		BIT_3S	/* force ADDRPERR on MST */
+#define TST_FRC_APERR_T		BIT_2S	/* force ADDRPERR on TRG */
+#define TST_CFG_WRITE_ON	BIT_1S	/* Enable  Config Reg WR */
+#define TST_CFG_WRITE_OFF	BIT_0S	/* Disable Config Reg WR */
+
+/*	B2_TST_CTRL2	 8 bit	Test Control Register 2 */
+									/* Bit 7.. 4:	reserved */
+			/* force the following error on the next master read/write	*/
+#define TST_FRC_DPERR_MR64	BIT_3S	/* DataPERR RD 64	*/
+#define TST_FRC_DPERR_MW64	BIT_2S	/* DataPERR WR 64	*/
+#define TST_FRC_APERR_1M64	BIT_1S	/* AddrPERR on 1. phase */
+#define TST_FRC_APERR_2M64	BIT_0S	/* AddrPERR on 2. phase */
+
+/*	B2_GP_IO		32 bit	General Purpose I/O Register */
+							/* Bit 31..26:	reserved */
+#define GP_DIR_9	BIT_25	/* IO_9 direct, 0=In/1=Out */
+#define GP_DIR_8	BIT_24	/* IO_8 direct, 0=In/1=Out */
+#define GP_DIR_7	BIT_23	/* IO_7 direct, 0=In/1=Out */
+#define GP_DIR_6	BIT_22	/* IO_6 direct, 0=In/1=Out */
+#define GP_DIR_5	BIT_21	/* IO_5 direct, 0=In/1=Out */
+#define GP_DIR_4	BIT_20	/* IO_4 direct, 0=In/1=Out */
+#define GP_DIR_3	BIT_19	/* IO_3 direct, 0=In/1=Out */
+#define GP_DIR_2	BIT_18	/* IO_2 direct, 0=In/1=Out */
+#define GP_DIR_1	BIT_17	/* IO_1 direct, 0=In/1=Out */
+#define GP_DIR_0	BIT_16	/* IO_0 direct, 0=In/1=Out */
+						/* Bit 15..10:	reserved */
+#define GP_IO_9		BIT_9	/* IO_9 pin */
+#define GP_IO_8		BIT_8	/* IO_8 pin */
+#define GP_IO_7		BIT_7	/* IO_7 pin */
+#define GP_IO_6		BIT_6	/* IO_6 pin */
+#define GP_IO_5		BIT_5	/* IO_5 pin */
+#define GP_IO_4		BIT_4	/* IO_4 pin */
+#define GP_IO_3		BIT_3	/* IO_3 pin */
+#define GP_IO_2		BIT_2	/* IO_2 pin */
+#define GP_IO_1		BIT_1	/* IO_1 pin */
+#define GP_IO_0		BIT_0	/* IO_0 pin */
+
+/*	B2_I2C_CTRL		32 bit	I2C HW Control Register */
+#define I2C_FLAG		BIT_31		/* Start read/write if WR */
+#define I2C_ADDR		(0x7fffL<<16)	/* Bit 30..16:	Addr to be RD/WR */
+#define I2C_DEV_SEL		(0x7fL<<9)		/* Bit 15.. 9:	I2C Device Select */
+								/* Bit	8.. 5:	reserved	*/
+#define I2C_BURST_LEN	BIT_4		/* Burst Len, 1/4 bytes */
+#define I2C_DEV_SIZE	(7<<1)		/* Bit	3.. 1:	I2C Device Size	*/
+#define I2C_025K_DEV	(0<<1)		/*		0: 256 Bytes or smal. */
+#define I2C_05K_DEV		(1<<1)		/* 		1: 512	Bytes	*/
+#define I2C_1K_DEV		(2<<1)		/*		2: 1024 Bytes	*/
+#define I2C_2K_DEV		(3<<1)		/*		3: 2048	Bytes	*/
+#define I2C_4K_DEV		(4<<1)		/*		4: 4096 Bytes	*/
+#define I2C_8K_DEV		(5<<1)		/*		5: 8192 Bytes	*/
+#define I2C_16K_DEV		(6<<1)		/*		6: 16384 Bytes	*/
+#define I2C_32K_DEV		(7<<1)		/*		7: 32768 Bytes	*/
+#define I2C_STOP		BIT_0		/* Interrupt I2C transfer */
+
+/*	B2_I2C_IRQ		32 bit	I2C HW IRQ Register */
+								/* Bit 31.. 1	reserved */
+#define I2C_CLR_IRQ		BIT_0	/* Clear I2C IRQ */
+
+/*	B2_I2C_SW		32 bit (8 bit access)	I2C HW SW Port Register */
+								/* Bit  7.. 3:	reserved */
+#define I2C_DATA_DIR	BIT_2S		/* direction of I2C_DATA */
+#define I2C_DATA		BIT_1S		/* I2C Data Port	*/
+#define I2C_CLK			BIT_0S		/* I2C Clock Port	*/
+
+/*
+ * I2C Address
+ */
+#define I2C_SENS_ADDR	LM80_ADDR	/* I2C Sensor Address, (Volt and Temp)*/
+
+
+/*	B2_BSC_CTRL		 8 bit	Blink Source Counter Control */
+							/* Bit  7.. 2:	reserved */
+#define BSC_START	BIT_1S		/* Start Blink Source Counter */
+#define BSC_STOP	BIT_0S		/* Stop  Blink Source Counter */
+
+/*	B2_BSC_STAT		 8 bit	Blink Source Counter Status */
+							/* Bit  7.. 1:	reserved */
+#define BSC_SRC		BIT_0S		/* Blink Source, 0=Off / 1=On */
+
+/*	B2_BSC_TST		16 bit	Blink Source Counter Test Reg */
+#define BSC_T_ON	BIT_2S		/* Test mode on */
+#define BSC_T_OFF	BIT_1S		/* Test mode off */
+#define BSC_T_STEP	BIT_0S		/* Test step */
+
+
+/*	B3_RAM_ADDR		32 bit	RAM Address, to read or write */
+					/* Bit 31..19:	reserved */
+#define RAM_ADR_RAN	0x0007ffffL	/* Bit 18.. 0:	RAM Address Range */
+
+/* RAM Interface Registers */
+/*	B3_RI_CTRL		16 bit	RAM Iface Control Register */
+								/* Bit 15..10:	reserved */
+#define RI_CLR_RD_PERR	BIT_9S	/* Clear IRQ RAM Read Parity Err */
+#define RI_CLR_WR_PERR	BIT_8S	/* Clear IRQ RAM Write Parity Err*/
+								/* Bit	7.. 2:	reserved */
+#define RI_RST_CLR		BIT_1S	/* Clear RAM Interface Reset */
+#define RI_RST_SET		BIT_0S	/* Set   RAM Interface Reset */
+
+/*	B3_RI_TEST		 8 bit	RAM Iface Test Register */
+								/* Bit 15.. 4:	reserved */
+#define RI_T_EV			BIT_3S	/* Timeout Event occured */
+#define RI_T_ON			BIT_2S	/* Timeout Timer Test On */
+#define RI_T_OFF		BIT_1S	/* Timeout Timer Test Off */
+#define RI_T_STEP		BIT_0S	/* Timeout Timer Step */
+
+/* MAC Arbiter Registers */
+/*	B3_MA_TO_CTRL	16 bit	MAC Arbiter Timeout Ctrl Reg */
+								/* Bit 15.. 4:	reserved */
+#define MA_FOE_ON		BIT_3S	/* XMAC Fast Output Enable ON */
+#define MA_FOE_OFF		BIT_2S	/* XMAC Fast Output Enable OFF */
+#define MA_RST_CLR		BIT_1S	/* Clear MAC Arbiter Reset */
+#define MA_RST_SET		BIT_0S	/* Set   MAC Arbiter Reset */
+
+/*	B3_MA_RC_CTRL	16 bit	MAC Arbiter Recovery Ctrl Reg */
+								/* Bit 15.. 8:	reserved */
+#define MA_ENA_REC_TX2	BIT_7S	/* Enable  Recovery Timer TX2 */
+#define MA_DIS_REC_TX2	BIT_6S	/* Disable Recovery Timer TX2 */
+#define MA_ENA_REC_TX1	BIT_5S	/* Enable  Recovery Timer TX1 */
+#define MA_DIS_REC_TX1	BIT_4S	/* Disable Recovery Timer TX1 */
+#define MA_ENA_REC_RX2	BIT_3S	/* Enable  Recovery Timer RX2 */
+#define MA_DIS_REC_RX2	BIT_2S	/* Disable Recovery Timer RX2 */
+#define MA_ENA_REC_RX1	BIT_1S	/* Enable  Recovery Timer RX1 */
+#define MA_DIS_REC_RX1	BIT_0S	/* Disable Recovery Timer RX1 */
+
+/* Packet Arbiter Registers */
+/*	B3_PA_CTRL		16 bit	Packet Arbiter Ctrl Register */
+								/* Bit 15..14:	reserved */
+#define PA_CLR_TO_TX2	BIT_13S	/* Clear IRQ Packet Timeout TX2 */
+#define PA_CLR_TO_TX1	BIT_12S	/* Clear IRQ Packet Timeout TX1 */
+#define PA_CLR_TO_RX2	BIT_11S	/* Clear IRQ Packet Timeout RX2 */
+#define PA_CLR_TO_RX1	BIT_10S	/* Clear IRQ Packet Timeout RX1 */
+#define PA_ENA_TO_TX2	BIT_9S	/* Enable  Timeout Timer TX2 */
+#define PA_DIS_TO_TX2	BIT_8S	/* Disable Timeout Timer TX2 */
+#define PA_ENA_TO_TX1	BIT_7S	/* Enable  Timeout Timer TX1 */
+#define PA_DIS_TO_TX1	BIT_6S	/* Disable Timeout Timer TX1 */
+#define PA_ENA_TO_RX2	BIT_5S	/* Enable  Timeout Timer RX2 */
+#define PA_DIS_TO_RX2	BIT_4S	/* Disable Timeout Timer RX2 */
+#define PA_ENA_TO_RX1	BIT_3S	/* Enable  Timeout Timer RX1 */
+#define PA_DIS_TO_RX1	BIT_2S	/* Disable Timeout Timer RX1 */
+#define PA_RST_CLR		BIT_1S	/* Clear MAC Arbiter Reset */
+#define PA_RST_SET		BIT_0S	/* Set   MAC Arbiter Reset */
+
+#define PA_ENA_TO_ALL	(PA_ENA_TO_RX1 | PA_ENA_TO_RX2 |\
+						PA_ENA_TO_TX1 | PA_ENA_TO_TX2)
+
+/* Rx/Tx Path related Arbiter Test Registers */
+/*	B3_MA_TO_TEST	16 bit	MAC Arbiter Timeout Test Reg */
+/*	B3_MA_RC_TEST	16 bit	MAC Arbiter Recovery Test Reg */
+/*	B3_PA_TEST		16 bit	Packet Arbiter Test Register */
+/*			Bit 15, 11, 7, and 3 are reserved in B3_PA_TEST */
+#define TX2_T_EV	BIT_15S		/* TX2 Timeout/Recv Event occured */
+#define TX2_T_ON	BIT_14S		/* TX2 Timeout/Recv Timer Test On */
+#define TX2_T_OFF	BIT_13S		/* TX2 Timeout/Recv Timer Tst Off */
+#define TX2_T_STEP	BIT_12S		/* TX2 Timeout/Recv Timer Step */
+#define TX1_T_EV	BIT_11S		/* TX1 Timeout/Recv Event occured */
+#define TX1_T_ON	BIT_10S		/* TX1 Timeout/Recv Timer Test On */
+#define TX1_T_OFF	BIT_9S		/* TX1 Timeout/Recv Timer Tst Off */
+#define TX1_T_STEP	BIT_8S		/* TX1 Timeout/Recv Timer Step */
+#define RX2_T_EV	BIT_7S		/* RX2 Timeout/Recv Event occured */
+#define RX2_T_ON	BIT_6S		/* RX2 Timeout/Recv Timer Test On */
+#define RX2_T_OFF	BIT_5S		/* RX2 Timeout/Recv Timer Tst Off */
+#define RX2_T_STEP	BIT_4S		/* RX2 Timeout/Recv Timer Step */
+#define RX1_T_EV	BIT_3S		/* RX1 Timeout/Recv Event occured */
+#define RX1_T_ON	BIT_2S		/* RX1 Timeout/Recv Timer Test On */
+#define RX1_T_OFF	BIT_1S		/* RX1 Timeout/Recv Timer Tst Off */
+#define RX1_T_STEP	BIT_0S		/* RX1 Timeout/Recv Timer Step */
+
+
+/* Transmit Arbiter Registers MAC 1 and 2, use MR_ADDR() to access */
+/*	TXA_ITI_INI		32 bit	Tx Arb Interval Timer Init Val */
+/*	TXA_ITI_VAL		32 bit	Tx Arb Interval Timer Value */
+/*	TXA_LIM_INI		32 bit	Tx Arb Limit Counter Init Val */
+/*	TXA_LIM_VAL		32 bit	Tx Arb Limit Counter Value */
+								/* Bit 31..24:	reserved */
+#define TXA_MAX_VAL	0x00ffffffUL/* Bit 23.. 0:	Max TXA Timer/Cnt Val */
+
+/*	TXA_CTRL		 8 bit	Tx Arbiter Control Register */
+#define TXA_ENA_FSYNC	BIT_7S	/* Enable  force of sync Tx queue */
+#define TXA_DIS_FSYNC	BIT_6S	/* Disable force of sync Tx queue */
+#define TXA_ENA_ALLOC	BIT_5S	/* Enable  alloc of free bandwidth */
+#define TXA_DIS_ALLOC	BIT_4S	/* Disable alloc of free bandwidth */
+#define TXA_START_RC	BIT_3S	/* Start sync Rate Control */
+#define TXA_STOP_RC		BIT_2S	/* Stop  sync Rate Control */
+#define TXA_ENA_ARB		BIT_1S	/* Enable  Tx Arbiter */
+#define TXA_DIS_ARB		BIT_0S	/* Disable Tx Arbiter */
+
+/*	TXA_TEST		 8 bit	Tx Arbiter Test Register */
+								/* Bit 7.. 6:	reserved */
+#define TXA_INT_T_ON	BIT_5S	/* Tx Arb Interval Timer Test On */
+#define TXA_INT_T_OFF	BIT_4S	/* Tx Arb Interval Timer Test Off */
+#define TXA_INT_T_STEP	BIT_3S	/* Tx Arb Interval Timer Step */
+#define TXA_LIM_T_ON	BIT_2S	/* Tx Arb Limit Timer Test On */
+#define TXA_LIM_T_OFF	BIT_1S	/* Tx Arb Limit Timer Test Off */
+#define TXA_LIM_T_STEP	BIT_0S	/* Tx Arb Limit Timer Step */
+
+/*	TXA_STAT		 8 bit	Tx Arbiter Status Register */
+								/* Bit 7.. 1:	reserved */
+#define TXA_PRIO_XS		BIT_0S	/* sync queue has prio to send */
+
+/*	Q_BC			32 bit	Current Byte Counter */
+								/* Bit 31..16:	reserved */
+#define BC_MAX			0xffff	/* Bit 15.. 0:	Byte counter */
+
+/* BMU Control Status Registers */
+/*	B0_R1_CSR		32 bit	BMU Ctrl/Stat Rx Queue 1 */
+/*	B0_R2_CSR		32 bit	BMU Ctrl/Stat Rx Queue 2 */
+/*	B0_XA1_CSR		32 bit	BMU Ctrl/Stat Sync Tx Queue 1 */
+/*	B0_XS1_CSR		32 bit	BMU Ctrl/Stat Async Tx Queue 1 */
+/*	B0_XA2_CSR		32 bit	BMU Ctrl/Stat Sync Tx Queue 2 */
+/*	B0_XS2_CSR		32 bit	BMU Ctrl/Stat Async Tx Queue 2 */
+/*	Q_CSR			32 bit	BMU Control/Status Register */
+								/* Bit 31..25:	reserved */
+#define CSR_SV_IDLE		BIT_24		/* BMU SM Idle */
+								/* Bit 23..22:	reserved */
+#define CSR_DESC_CLR	BIT_21		/* Clear Reset for Descr */
+#define CSR_DESC_SET	BIT_20		/* Set   Reset for Descr */
+#define CSR_FIFO_CLR	BIT_19		/* Clear Reset for FIFO */
+#define CSR_FIFO_SET	BIT_18		/* Set   Reset for FIFO */
+#define CSR_HPI_RUN		BIT_17		/* Release HPI SM */
+#define CSR_HPI_RST		BIT_16		/* Reset   HPI SM to Idle */
+#define CSR_SV_RUN		BIT_15		/* Release Supervisor SM */
+#define CSR_SV_RST		BIT_14		/* Reset   Supervisor SM */
+#define CSR_DREAD_RUN	BIT_13		/* Release Descr Read SM */
+#define CSR_DREAD_RST	BIT_12		/* Reset   Descr Read SM */
+#define CSR_DWRITE_RUN	BIT_11		/* Release Descr Write SM */
+#define CSR_DWRITE_RST	BIT_10		/* Reset   Descr Write SM */
+#define CSR_TRANS_RUN	BIT_9		/* Release Transfer SM */
+#define CSR_TRANS_RST	BIT_8		/* Reset   Transfer SM */
+#define CSR_ENA_POL		BIT_7		/* Enable  Descr Polling */
+#define CSR_DIS_POL		BIT_6		/* Disable Descr Polling */
+#define CSR_STOP		BIT_5		/* Stop  Rx/Tx Queue */
+#define CSR_START		BIT_4		/* Start Rx/Tx Queue */
+#define CSR_IRQ_CL_P	BIT_3		/* (Rx)	Clear Parity IRQ */
+#define CSR_IRQ_CL_B	BIT_2		/* Clear EOB IRQ */
+#define CSR_IRQ_CL_F	BIT_1		/* Clear EOF IRQ */
+#define CSR_IRQ_CL_C	BIT_0		/* Clear ERR IRQ */
+
+#define CSR_SET_RESET	(CSR_DESC_SET | CSR_FIFO_SET | CSR_HPI_RST |\
+						CSR_SV_RST | CSR_DREAD_RST | CSR_DWRITE_RST |\
+						CSR_TRANS_RST)
+#define CSR_CLR_RESET	(CSR_DESC_CLR | CSR_FIFO_CLR | CSR_HPI_RUN |\
+						CSR_SV_RUN | CSR_DREAD_RUN | CSR_DWRITE_RUN |\
+						CSR_TRANS_RUN)
+
+/*	Q_F				32 bit	Flag Register */
+									/* Bit 31..28:	reserved */
+#define F_ALM_FULL		BIT_27		/* Rx FIFO: almost full */
+#define F_EMPTY			BIT_27		/* Tx FIFO: empty flag */
+#define F_FIFO_EOF		BIT_26		/* Tag (EOF Flag) bit in FIFO */
+#define F_WM_REACHED	BIT_25		/* Watermark reached */
+									/* reserved */
+#define F_FIFO_LEVEL	(0x1fL<<16)	/* Bit 23..16:	# of Qwords in FIFO */
+									/* Bit 15..11: 	reserved */
+#define F_WATER_MARK	0x0007ffL	/* Bit 10.. 0:	Watermark */
+
+/*	Q_T1			32 bit	Test Register 1 */
+/*		Holds four State Machine control Bytes */
+#define SM_CTRL_SV_MSK	(0xffL<<24)	/* Bit 31..24:	Control Supervisor SM */
+#define SM_CTRL_RD_MSK	(0xffL<<16)	/* Bit 23..16:	Control Read Desc SM */
+#define SM_CTRL_WR_MSK	(0xffL<<8)	/* Bit 15.. 8:	Control Write Desc SM */
+#define SM_CTRL_TR_MSK	0xffL		/* Bit	7.. 0:	Control Transfer SM */
+
+/*	Q_T1_TR			 8 bit	Test Register 1 Transfer SM */
+/*	Q_T1_WR			 8 bit	Test Register 1 Write Descriptor SM */
+/*	Q_T1_RD			 8 bit	Test Register 1 Read Descriptor SM */
+/*	Q_T1_SV			 8 bit	Test Register 1 Supervisor SM */
+
+/* The control status byte of each machine looks like ... */
+#define SM_STATE		0xf0	/* Bit 7.. 4:	State which shall be loaded */
+#define SM_LOAD			BIT_3S	/* Load the SM with SM_STATE */
+#define SM_TEST_ON		BIT_2S	/* Switch on SM Test Mode */
+#define SM_TEST_OFF		BIT_1S	/* Go off the Test Mode */
+#define SM_STEP			BIT_0S	/* Step the State Machine */
+/* The encoding of the states is not supported by the Diagnostics Tool */
+
+/*	Q_T2			32 bit	Test Register 2	*/
+								/* Bit 31.. 8:	reserved */
+#define T2_AC_T_ON		BIT_7	/* Address Counter Test Mode on */
+#define T2_AC_T_OFF		BIT_6	/* Address Counter Test Mode off */
+#define T2_BC_T_ON		BIT_5	/* Byte Counter Test Mode on */
+#define T2_BC_T_OFF		BIT_4	/* Byte Counter Test Mode off */
+#define T2_STEP04		BIT_3	/* Inc AC/Dec BC by 4 */
+#define T2_STEP03		BIT_2	/* Inc AC/Dec BC by 3 */
+#define T2_STEP02		BIT_1	/* Inc AC/Dec BC by 2 */
+#define T2_STEP01		BIT_0	/* Inc AC/Dec BC by 1 */
+
+/*	Q_T3			32 bit	Test Register 3	*/
+								/* Bit 31.. 7:	reserved */
+#define T3_MUX_MSK		(7<<4)	/* Bit  6.. 4:	Mux Position */
+								/* Bit  3:	reserved */
+#define T3_VRAM_MSK		7		/* Bit  2.. 0:	Virtual RAM Buffer Address */
+
+/* RAM Buffer Register Offsets, use RB_ADDR(Queue, Offs) to access */
+/*	RB_START		32 bit	RAM Buffer Start Address */
+/*	RB_END			32 bit	RAM Buffer End Address */
+/*	RB_WP			32 bit	RAM Buffer Write Pointer */
+/*	RB_RP			32 bit	RAM Buffer Read Pointer */
+/*	RB_RX_UTPP		32 bit	Rx Upper Threshold, Pause Pack */
+/*	RB_RX_LTPP		32 bit	Rx Lower Threshold, Pause Pack */
+/*	RB_RX_UTHP		32 bit	Rx Upper Threshold, High Prio */
+/*	RB_RX_LTHP		32 bit	Rx Lower Threshold, High Prio */
+/*	RB_PC			32 bit	RAM Buffer Packet Counter */
+/*	RB_LEV			32 bit	RAM Buffer Level Register */
+				/* Bit 31..19:	reserved */
+#define RB_MSK	0x0007ffff	/* Bit 18.. 0:	RAM Buffer Pointer Bits */
+
+/*	RB_TST2			 8 bit	RAM Buffer Test Register 2 */
+								/* Bit 7.. 4:	reserved */
+#define RB_PC_DEC		BIT_3S	/* Packet Counter Decrem */
+#define RB_PC_T_ON		BIT_2S	/* Packet Counter Test On */
+#define RB_PC_T_OFF		BIT_1S	/* Packet Counter Tst Off */
+#define RB_PC_INC		BIT_0S	/* Packet Counter Increm */
+
+/*	RB_TST1			 8 bit	RAM Buffer Test Register 1 */
+							/* Bit 7:	reserved */
+#define RB_WP_T_ON		BIT_6S	/* Write Pointer Test On */
+#define RB_WP_T_OFF		BIT_5S	/* Write Pointer Test Off */
+#define RB_WP_INC		BIT_4S	/* Write Pointer Increm */
+								/* Bit 3:	reserved */
+#define RB_RP_T_ON		BIT_2S	/* Read Pointer Test On */
+#define RB_RP_T_OFF		BIT_1S	/* Read Pointer Test Off */
+#define RB_RP_DEC		BIT_0S	/* Read Pointer Decrement */
+
+/*	RB_CTRL			 8 bit	RAM Buffer Control Register */
+								/* Bit 7.. 6:	reserved */
+#define RB_ENA_STFWD	BIT_5S	/* Enable  Store & Forward */
+#define RB_DIS_STFWD	BIT_4S	/* Disable Store & Forward */
+#define RB_ENA_OP_MD	BIT_3S	/* Enable  Operation Mode */
+#define RB_DIS_OP_MD	BIT_2S	/* Disable Operation Mode */
+#define RB_RST_CLR		BIT_1S	/* Clear RAM Buf STM Reset */
+#define RB_RST_SET		BIT_0S	/* Set   RAM Buf STM Reset */
+
+
+/* Receive and Transmit MAC FIFO Registers (GENESIS only) */
+
+/*	RX_MFF_EA		32 bit	Receive MAC FIFO End Address */
+/*	RX_MFF_WP		32 bit 	Receive MAC FIFO Write Pointer */
+/*	RX_MFF_RP		32 bit	Receive MAC FIFO Read Pointer */
+/*	RX_MFF_PC		32 bit	Receive MAC FIFO Packet Counter */
+/*	RX_MFF_LEV		32 bit	Receive MAC FIFO Level */
+/*	TX_MFF_EA		32 bit	Transmit MAC FIFO End Address */
+/*	TX_MFF_WP		32 bit 	Transmit MAC FIFO Write Pointer */
+/*	TX_MFF_WSP		32 bit	Transmit MAC FIFO WR Shadow Pointer */
+/*	TX_MFF_RP		32 bit	Transmit MAC FIFO Read Pointer */
+/*	TX_MFF_PC		32 bit	Transmit MAC FIFO Packet Cnt */
+/*	TX_MFF_LEV		32 bit	Transmit MAC FIFO Level */
+								/* Bit 31.. 6:	reserved */
+#define MFF_MSK			0x007fL	/* Bit	5.. 0:	MAC FIFO Address/Ptr Bits */
+
+/*	RX_MFF_CTRL1	16 bit	Receive MAC FIFO Control Reg 1 */
+								/* Bit 15..14:	reserved */
+#define MFF_ENA_RDY_PAT	BIT_13S		/* Enable  Ready Patch */
+#define MFF_DIS_RDY_PAT	BIT_12S		/* Disable Ready Patch */
+#define MFF_ENA_TIM_PAT	BIT_11S		/* Enable  Timing Patch */
+#define MFF_DIS_TIM_PAT	BIT_10S		/* Disable Timing Patch */
+#define MFF_ENA_ALM_FUL	BIT_9S		/* Enable  AlmostFull Sign */
+#define MFF_DIS_ALM_FUL	BIT_8S		/* Disable AlmostFull Sign */
+#define MFF_ENA_PAUSE	BIT_7S		/* Enable  Pause Signaling */
+#define MFF_DIS_PAUSE	BIT_6S		/* Disable Pause Signaling */
+#define MFF_ENA_FLUSH	BIT_5S		/* Enable  Frame Flushing */
+#define MFF_DIS_FLUSH	BIT_4S		/* Disable Frame Flushing */
+#define MFF_ENA_TIST	BIT_3S		/* Enable  Time Stamp Gener */
+#define MFF_DIS_TIST	BIT_2S		/* Disable Time Stamp Gener */
+#define MFF_CLR_INTIST	BIT_1S		/* Clear IRQ No Time Stamp */
+#define MFF_CLR_INSTAT	BIT_0S		/* Clear IRQ No Status */
+
+#define MFF_RX_CTRL_DEF MFF_ENA_TIM_PAT
+
+/*	TX_MFF_CTRL1	16 bit	Transmit MAC FIFO Control Reg 1 */
+#define MFF_CLR_PERR	BIT_15S		/* Clear Parity Error IRQ */
+								/* Bit 14:	reserved */
+#define MFF_ENA_PKT_REC	BIT_13S		/* Enable  Packet Recovery */
+#define MFF_DIS_PKT_REC BIT_12S		/* Disable Packet Recovery */
+/*	MFF_ENA_TIM_PAT	 (see RX_MFF_CTRL1) Bit 11:	Enable  Timing Patch */
+/*	MFF_DIS_TIM_PAT	 (see RX_MFF_CTRL1) Bit 10:	Disable Timing Patch */
+/*	MFF_ENA_ALM_FUL	 (see RX_MFF_CTRL1) Bit	 9:	Enable  Almost Full Sign */
+/*	MFF_DIS_ALM_FUL	 (see RX_MFF_CTRL1) Bit	 8:	Disable Almost Full Sign */
+#define MFF_ENA_W4E		BIT_7S		/* Enable  Wait for Empty */
+#define MFF_DIS_W4E		BIT_6S		/* Disable Wait for Empty */
+/*	MFF_ENA_FLUSH	 (see RX_MFF_CTRL1) Bit	 5:	Enable  Frame Flushing */
+/*	MFF_DIS_FLUSH	 (see RX_MFF_CTRL1) Bit	 4:	Disable Frame Flushing */
+#define MFF_ENA_LOOPB	BIT_3S		/* Enable  Loopback */
+#define MFF_DIS_LOOPB	BIT_2S		/* Disable Loopback */
+#define MFF_CLR_MAC_RST	BIT_1S		/* Clear XMAC Reset */
+#define MFF_SET_MAC_RST	BIT_0S		/* Set   XMAC Reset */
+
+#define MFF_TX_CTRL_DEF	(MFF_ENA_PKT_REC | MFF_ENA_TIM_PAT | MFF_ENA_FLUSH)
+
+/*	RX_MFF_TST2	 	 8 bit	Receive MAC FIFO Test Register 2 */
+/*	TX_MFF_TST2	 	 8 bit	Transmit MAC FIFO Test Register 2 */
+								/* Bit 7:	reserved */
+#define MFF_WSP_T_ON	BIT_6S	/* Tx: Write Shadow Ptr TestOn */
+#define MFF_WSP_T_OFF	BIT_5S	/* Tx: Write Shadow Ptr TstOff */
+#define MFF_WSP_INC		BIT_4S	/* Tx: Write Shadow Ptr Increment */
+#define MFF_PC_DEC		BIT_3S	/* Packet Counter Decrement */
+#define MFF_PC_T_ON		BIT_2S	/* Packet Counter Test On */
+#define MFF_PC_T_OFF	BIT_1S	/* Packet Counter Test Off */
+#define MFF_PC_INC		BIT_0S	/* Packet Counter Increment */
+
+/*	RX_MFF_TST1	 	 8 bit	Receive MAC FIFO Test Register 1 */
+/*	TX_MFF_TST1	 	 8 bit	Transmit MAC FIFO Test Register 1 */
+					/* Bit 7:	reserved */
+#define MFF_WP_T_ON		BIT_6S	/* Write Pointer Test On */
+#define MFF_WP_T_OFF	BIT_5S	/* Write Pointer Test Off */
+#define MFF_WP_INC		BIT_4S	/* Write Pointer Increm */
+							/* Bit 3:	reserved */
+#define MFF_RP_T_ON		BIT_2S	/* Read Pointer Test On */
+#define MFF_RP_T_OFF	BIT_1S	/* Read Pointer Test Off */
+#define MFF_RP_DEC		BIT_0S	/* Read Pointer Decrement */
+
+/*	RX_MFF_CTRL2	 8 bit	Receive MAC FIFO Control Reg 2 */
+/*	TX_MFF_CTRL2	 8 bit	Transmit MAC FIFO Control Reg 2 */
+								/* Bit 7..4:	reserved */
+#define MFF_ENA_OP_MD	BIT_3S	/* Enable  Operation Mode */
+#define MFF_DIS_OP_MD	BIT_2S	/* Disable Operation Mode */
+#define MFF_RST_CLR		BIT_1S	/* Clear MAC FIFO Reset */
+#define MFF_RST_SET		BIT_0S	/* Set   MAC FIFO Reset */
+
+
+/*	Link LED Counter Registers (GENESIS only) */
+
+/*	RX_LED_CTRL		 8 bit	Receive LED Cnt Control Reg */
+/*	TX_LED_CTRL		 8 bit	Transmit LED Cnt Control Reg */
+/*	LNK_SYNC_CTRL	 8 bit	Link Sync Cnt Control Register */
+							/* Bit 7.. 3:	reserved */
+#define LED_START		BIT_2S	/* Start Timer */
+#define LED_STOP		BIT_1S	/* Stop Timer */
+#define LED_STATE		BIT_0S	/* Rx/Tx: LED State, 1=LED on */
+#define LED_CLR_IRQ		BIT_0S	/* Lnk: 	Clear Link IRQ */
+
+/*	RX_LED_TST		 8 bit	Receive LED Cnt Test Register */
+/*	TX_LED_TST		 8 bit	Transmit LED Cnt Test Register */
+/*	LNK_SYNC_TST	 8 bit	Link Sync Cnt Test Register */
+							/* Bit 7.. 3:	reserved */
+#define LED_T_ON		BIT_2S	/* LED Counter Test mode On */
+#define LED_T_OFF		BIT_1S	/* LED Counter Test mode Off */
+#define LED_T_STEP		BIT_0S	/* LED Counter Step */
+
+/*	LNK_LED_REG	 	 8 bit	Link LED Register */
+								/* Bit 7.. 6:	reserved */
+#define LED_BLK_ON		BIT_5S	/* Link LED Blinking On */
+#define LED_BLK_OFF		BIT_4S	/* Link LED Blinking Off */
+#define LED_SYNC_ON		BIT_3S	/* Use Sync Wire to switch LED */
+#define LED_SYNC_OFF	BIT_2S	/* Disable Sync Wire Input */
+#define LED_ON			BIT_1S	/* switch LED on */
+#define LED_OFF			BIT_0S	/* switch LED off */
+
+/*	Receive and Transmit GMAC FIFO Registers (YUKON only) */
+
+/*	RX_GMF_EA		32 bit	Rx GMAC FIFO End Address */
+/*	RX_GMF_AF_THR	32 bit	Rx GMAC FIFO Almost Full Thresh. */
+/*	RX_GMF_WP		32 bit 	Rx GMAC FIFO Write Pointer */
+/*	RX_GMF_WLEV		32 bit 	Rx GMAC FIFO Write Level */
+/*	RX_GMF_RP		32 bit 	Rx GMAC FIFO Read Pointer */
+/*	RX_GMF_RLEV		32 bit 	Rx GMAC FIFO Read Level */
+/*	TX_GMF_EA		32 bit	Tx GMAC FIFO End Address */
+/*	TX_GMF_AE_THR	32 bit	Tx GMAC FIFO Almost Empty Thresh.*/
+/*	TX_GMF_WP		32 bit 	Tx GMAC FIFO Write Pointer */
+/*	TX_GMF_WSP		32 bit 	Tx GMAC FIFO Write Shadow Ptr. */
+/*	TX_GMF_WLEV		32 bit 	Tx GMAC FIFO Write Level */
+/*	TX_GMF_RP		32 bit 	Tx GMAC FIFO Read Pointer */
+/*	TX_GMF_RSTP		32 bit 	Tx GMAC FIFO Restart Pointer */
+/*	TX_GMF_RLEV		32 bit 	Tx GMAC FIFO Read Level */
+
+/*	RX_GMF_CTRL_T	32 bit	Rx GMAC FIFO Control/Test */
+						/* Bits 31..15:	reserved */
+#define GMF_WP_TST_ON	BIT_14		/* Write Pointer Test On */
+#define GMF_WP_TST_OFF	BIT_13		/* Write Pointer Test Off */
+#define GMF_WP_STEP		BIT_12		/* Write Pointer Step/Increment */
+						/* Bit 11:	reserved */
+#define GMF_RP_TST_ON	BIT_10		/* Read Pointer Test On */
+#define GMF_RP_TST_OFF	BIT_9		/* Read Pointer Test Off */
+#define GMF_RP_STEP		BIT_8		/* Read Pointer Step/Increment */
+#define GMF_RX_F_FL_ON	BIT_7		/* Rx FIFO Flush Mode On */
+#define GMF_RX_F_FL_OFF	BIT_6		/* Rx FIFO Flush Mode Off */
+#define GMF_CLI_RX_FO	BIT_5		/* Clear IRQ Rx FIFO Overrun */
+#define GMF_CLI_RX_FC	BIT_4		/* Clear IRQ Rx Frame Complete */
+#define GMF_OPER_ON		BIT_3		/* Operational Mode On */
+#define GMF_OPER_OFF	BIT_2		/* Operational Mode Off */
+#define GMF_RST_CLR		BIT_1		/* Clear GMAC FIFO Reset */
+#define GMF_RST_SET		BIT_0		/* Set   GMAC FIFO Reset */
+
+/*	TX_GMF_CTRL_T	32 bit	Tx GMAC FIFO Control/Test */
+						/* Bits 31..19:	reserved */
+#define GMF_WSP_TST_ON	BIT_18		/* Write Shadow Pointer Test On */
+#define GMF_WSP_TST_OFF	BIT_17		/* Write Shadow Pointer Test Off */
+#define GMF_WSP_STEP	BIT_16		/* Write Shadow Pointer Step/Increment */
+						/* Bits 15..7: same as for RX_GMF_CTRL_T */
+#define GMF_CLI_TX_FU	BIT_6		/* Clear IRQ Tx FIFO Underrun */
+#define GMF_CLI_TX_FC	BIT_5		/* Clear IRQ Tx Frame Complete */
+#define GMF_CLI_TX_PE	BIT_4		/* Clear IRQ Tx Parity Error */
+						/* Bits 3..0: same as for RX_GMF_CTRL_T */
+
+#define GMF_RX_CTRL_DEF		(GMF_OPER_ON | GMF_RX_F_FL_ON)
+#define GMF_TX_CTRL_DEF		GMF_OPER_ON
+
+#define RX_GMF_FL_THR_DEF	0x0a	/* Rx GMAC FIFO Flush Threshold default */
+
+/*	GMAC_TI_ST_CTRL	 8 bit	Time Stamp Timer Ctrl Reg (YUKON only) */
+								/* Bit 7.. 3:	reserved */
+#define GMT_ST_START	BIT_2S		/* Start Time Stamp Timer */
+#define GMT_ST_STOP		BIT_1S		/* Stop  Time Stamp Timer */
+#define GMT_ST_CLR_IRQ	BIT_0S		/* Clear Time Stamp Timer IRQ */
+
+/*	GMAC_CTRL		32 bit	GMAC Control Reg (YUKON only) */
+						/* Bits 31.. 8:	reserved */
+#define GMC_H_BURST_ON	BIT_7		/* Half Duplex Burst Mode On */
+#define GMC_H_BURST_OFF	BIT_6		/* Half Duplex Burst Mode Off */
+#define GMC_F_LOOPB_ON	BIT_5		/* FIFO Loopback On */
+#define GMC_F_LOOPB_OFF	BIT_4		/* FIFO Loopback Off */
+#define GMC_PAUSE_ON	BIT_3		/* Pause On */
+#define GMC_PAUSE_OFF	BIT_2		/* Pause Off */
+#define GMC_RST_CLR		BIT_1		/* Clear GMAC Reset */
+#define GMC_RST_SET		BIT_0		/* Set   GMAC Reset */
+
+/*	GPHY_CTRL		32 bit	GPHY Control Reg (YUKON only) */
+						/* Bits 31..29:	reserved */
+#define GPC_SEL_BDT		BIT_28	/* Select Bi-Dir. Transfer for MDC/MDIO */
+#define GPC_INT_POL_HI	BIT_27	/* IRQ Polarity is Active HIGH */
+#define GPC_75_OHM		BIT_26	/* Use 75 Ohm Termination instead of 50 */
+#define GPC_DIS_FC		BIT_25	/* Disable Automatic Fiber/Copper Detection */
+#define GPC_DIS_SLEEP	BIT_24	/* Disable Energy Detect */
+#define GPC_HWCFG_M_3	BIT_23	/* HWCFG_MODE[3] */
+#define GPC_HWCFG_M_2	BIT_22	/* HWCFG_MODE[2] */
+#define GPC_HWCFG_M_1	BIT_21	/* HWCFG_MODE[1] */
+#define GPC_HWCFG_M_0	BIT_20	/* HWCFG_MODE[0] */
+#define GPC_ANEG_0		BIT_19	/* ANEG[0] */
+#define GPC_ENA_XC		BIT_18	/* Enable MDI crossover */
+#define GPC_DIS_125		BIT_17	/* Disable 125 MHz clock */
+#define GPC_ANEG_3		BIT_16	/* ANEG[3] */
+#define GPC_ANEG_2		BIT_15	/* ANEG[2] */
+#define GPC_ANEG_1		BIT_14	/* ANEG[1] */
+#define GPC_ENA_PAUSE	BIT_13	/* Enable Pause (SYM_OR_REM) */
+#define GPC_PHYADDR_4	BIT_12	/* Bit 4 of Phy Addr */
+#define GPC_PHYADDR_3	BIT_11	/* Bit 3 of Phy Addr */
+#define GPC_PHYADDR_2	BIT_10	/* Bit 2 of Phy Addr */
+#define GPC_PHYADDR_1	BIT_9	/* Bit 1 of Phy Addr */
+#define GPC_PHYADDR_0	BIT_8	/* Bit 0 of Phy Addr */
+						/* Bits  7..2:	reserved */
+#define GPC_RST_CLR		BIT_1	/* Clear GPHY Reset */
+#define GPC_RST_SET		BIT_0	/* Set   GPHY Reset */
+
+#define GPC_HWCFG_GMII_COP	(GPC_HWCFG_M_3 | GPC_HWCFG_M_2 | \
+							 GPC_HWCFG_M_1 | GPC_HWCFG_M_0)
+
+#define GPC_HWCFG_GMII_FIB	(				 GPC_HWCFG_M_2 | \
+							 GPC_HWCFG_M_1 | GPC_HWCFG_M_0)
+
+#define GPC_ANEG_ADV_ALL_M	(GPC_ANEG_3 | GPC_ANEG_2 | \
+							 GPC_ANEG_1 | GPC_ANEG_0)
+
+/* forced speed and duplex mode (don't mix with other ANEG bits) */
+#define GPC_FRC10MBIT_HALF	0
+#define GPC_FRC10MBIT_FULL	GPC_ANEG_0
+#define GPC_FRC100MBIT_HALF	GPC_ANEG_1
+#define GPC_FRC100MBIT_FULL	(GPC_ANEG_0 | GPC_ANEG_1)
+
+/* auto-negotiation with limited advertised speeds */
+/* mix only with master/slave settings (for copper) */
+#define GPC_ADV_1000_HALF	GPC_ANEG_2
+#define GPC_ADV_1000_FULL	GPC_ANEG_3
+#define GPC_ADV_ALL			(GPC_ANEG_2 | GPC_ANEG_3)
+
+/* master/slave settings */
+/* only for copper with 1000 Mbps */
+#define GPC_FORCE_MASTER	0
+#define GPC_FORCE_SLAVE		GPC_ANEG_0
+#define GPC_PREF_MASTER		GPC_ANEG_1
+#define GPC_PREF_SLAVE		(GPC_ANEG_1 | GPC_ANEG_0)
+
+/*	GMAC_IRQ_SRC	 8 bit	GMAC Interrupt Source Reg (YUKON only) */
+/*	GMAC_IRQ_MSK	 8 bit	GMAC Interrupt Mask   Reg (YUKON only) */
+#define GM_IS_TX_CO_OV	BIT_5		/* Transmit Counter Overflow IRQ */
+#define GM_IS_RX_CO_OV	BIT_4		/* Receive Counter Overflow IRQ */
+#define GM_IS_TX_FF_UR	BIT_3		/* Transmit FIFO Underrun */
+#define GM_IS_TX_COMPL	BIT_2		/* Frame Transmission Complete */
+#define GM_IS_RX_FF_OR	BIT_1		/* Receive FIFO Overrun */
+#define GM_IS_RX_COMPL	BIT_0		/* Frame Reception Complete */
+
+#define GMAC_DEF_MSK	(GM_IS_TX_CO_OV | GM_IS_RX_CO_OV | \
+						GM_IS_TX_FF_UR)
+
+/*	GMAC_LINK_CTRL	16 bit	GMAC Link Control Reg (YUKON only) */
+						/* Bits 15.. 2:	reserved */
+#define GMLC_RST_CLR	BIT_1S		/* Clear GMAC Link Reset */
+#define GMLC_RST_SET	BIT_0S		/* Set   GMAC Link Reset */
+
+
+/*	WOL_CTRL_STAT	16 bit	WOL Control/Status Reg */
+#define WOL_CTL_LINK_CHG_OCC			BIT_15S
+#define WOL_CTL_MAGIC_PKT_OCC			BIT_14S
+#define WOL_CTL_PATTERN_OCC				BIT_13S
+
+#define WOL_CTL_CLEAR_RESULT			BIT_12S
+
+#define WOL_CTL_ENA_PME_ON_LINK_CHG		BIT_11S
+#define WOL_CTL_DIS_PME_ON_LINK_CHG		BIT_10S
+#define WOL_CTL_ENA_PME_ON_MAGIC_PKT	BIT_9S
+#define WOL_CTL_DIS_PME_ON_MAGIC_PKT	BIT_8S
+#define WOL_CTL_ENA_PME_ON_PATTERN		BIT_7S
+#define WOL_CTL_DIS_PME_ON_PATTERN		BIT_6S
+
+#define WOL_CTL_ENA_LINK_CHG_UNIT		BIT_5S
+#define WOL_CTL_DIS_LINK_CHG_UNIT		BIT_4S
+#define WOL_CTL_ENA_MAGIC_PKT_UNIT		BIT_3S
+#define WOL_CTL_DIS_MAGIC_PKT_UNIT		BIT_2S
+#define WOL_CTL_ENA_PATTERN_UNIT		BIT_1S
+#define WOL_CTL_DIS_PATTERN_UNIT		BIT_0S
+
+#define WOL_CTL_DEFAULT				\
+	(WOL_CTL_DIS_PME_ON_LINK_CHG |	\
+	WOL_CTL_DIS_PME_ON_PATTERN |	\
+	WOL_CTL_DIS_PME_ON_MAGIC_PKT |	\
+	WOL_CTL_DIS_LINK_CHG_UNIT |		\
+	WOL_CTL_DIS_PATTERN_UNIT |		\
+	WOL_CTL_DIS_MAGIC_PKT_UNIT)
+
+/*	WOL_MATCH_CTL	 8 bit	WOL Match Control Reg */
+#define WOL_CTL_PATT_ENA(x)				(BIT_0 << (x))
+
+#define SK_NUM_WOL_PATTERN		7
+#define SK_PATTERN_PER_WORD		4
+#define SK_BITMASK_PATTERN		7
+#define SK_POW_PATTERN_LENGTH	128
+
+#define WOL_LENGTH_MSK		0x7f
+#define WOL_LENGTH_SHIFT	8
+
+
+/* Receive and Transmit Descriptors ******************************************/
+
+/* Transmit Descriptor struct */
+typedef	struct s_HwTxd {
+	SK_U32 volatile	TxCtrl;	/* Transmit Buffer Control Field */
+	SK_U32	TxNext;			/* Physical Address Pointer to the next TxD */
+	SK_U32	TxAdrLo;		/* Physical Tx Buffer Address lower dword */
+	SK_U32	TxAdrHi;		/* Physical Tx Buffer Address upper dword */
+	SK_U32	TxStat;			/* Transmit Frame Status Word */
+#ifndef	SK_USE_REV_DESC
+	SK_U16	TxTcpOffs;		/* TCP Checksum Calculation Start Value */
+	SK_U16	TxRes1;			/* 16 bit reserved field */
+	SK_U16	TxTcpWp;		/* TCP Checksum Write Position */
+	SK_U16	TxTcpSp;		/* TCP Checksum Calculation Start Position */
+#else	/* SK_USE_REV_DESC */
+	SK_U16	TxRes1;			/* 16 bit reserved field */
+	SK_U16	TxTcpOffs;		/* TCP Checksum Calculation Start Value */
+	SK_U16	TxTcpSp;		/* TCP Checksum Calculation Start Position */
+	SK_U16	TxTcpWp;		/* TCP Checksum Write Position */
+#endif	/* SK_USE_REV_DESC */
+	SK_U32  TxRes2;			/* 32 bit reserved field */
+} SK_HWTXD;
+
+/* Receive Descriptor struct */
+typedef	struct s_HwRxd {
+	SK_U32 volatile RxCtrl;	/* Receive Buffer Control Field */
+	SK_U32	RxNext;			/* Physical Address Pointer to the next RxD */
+	SK_U32	RxAdrLo;		/* Physical Rx Buffer Address lower dword */
+	SK_U32	RxAdrHi;		/* Physical Rx Buffer Address upper dword */
+	SK_U32	RxStat;			/* Receive Frame Status Word */
+	SK_U32	RxTiSt;			/* Receive Time Stamp (from XMAC on GENESIS) */
+#ifndef	SK_USE_REV_DESC
+	SK_U16	RxTcpSum1;		/* TCP Checksum 1 */
+	SK_U16	RxTcpSum2;		/* TCP Checksum 2 */
+	SK_U16	RxTcpSp1;		/* TCP Checksum Calculation Start Position 1 */
+	SK_U16	RxTcpSp2;		/* TCP Checksum Calculation Start Position 2 */
+#else	/* SK_USE_REV_DESC */
+	SK_U16	RxTcpSum2;		/* TCP Checksum 2 */
+	SK_U16	RxTcpSum1;		/* TCP Checksum 1 */
+	SK_U16	RxTcpSp2;		/* TCP Checksum Calculation Start Position 2 */
+	SK_U16	RxTcpSp1;		/* TCP Checksum Calculation Start Position 1 */
+#endif	/* SK_USE_REV_DESC */
+} SK_HWRXD;
+
+/*
+ * Drivers which use the reverse descriptor feature (PCI_OUR_REG_2)
+ * should set the define SK_USE_REV_DESC.
+ * Structures are 'normaly' not endianess dependent. But in
+ * this case the SK_U16 fields are bound to bit positions inside the
+ * descriptor. RxTcpSum1 e.g. must start at bit 0 within the 6.th DWord.
+ * The bit positions inside a DWord are of course endianess dependent and
+ * swaps if the DWord is swapped by the hardware.
+ */
+
+
+/* Descriptor Bit Definition */
+/*	TxCtrl		Transmit Buffer Control Field */
+/*	RxCtrl		Receive  Buffer Control Field */
+#define BMU_OWN			BIT_31	/* OWN bit: 0=host/1=BMU */
+#define BMU_STF			BIT_30	/* Start of Frame */
+#define BMU_EOF			BIT_29	/* End of Frame */
+#define BMU_IRQ_EOB		BIT_28	/* Req "End of Buffer" IRQ */
+#define BMU_IRQ_EOF		BIT_27	/* Req "End of Frame" IRQ */
+/* TxCtrl specific bits */
+#define BMU_STFWD		BIT_26	/* (Tx)	Store & Forward Frame */
+#define BMU_NO_FCS		BIT_25	/* (Tx) Disable MAC FCS (CRC) generation */
+#define BMU_SW			BIT_24	/* (Tx)	1 bit res. for SW use */
+/* RxCtrl specific bits */
+#define BMU_DEV_0		BIT_26	/* (Rx)	Transfer data to Dev0 */
+#define BMU_STAT_VAL	BIT_25	/* (Rx)	Rx Status Valid */
+#define BMU_TIST_VAL	BIT_24	/* (Rx)	Rx TimeStamp Valid */
+								/* Bit 23..16:	BMU Check Opcodes */
+#define BMU_CHECK		(0x55L<<16)	/* Default BMU check */
+#define BMU_TCP_CHECK	(0x56L<<16)	/* Descr with TCP ext */
+#define BMU_UDP_CHECK	(0x57L<<16)	/* Descr with UDP ext (YUKON only) */
+#define BMU_BBC			0xffffL	/* Bit 15.. 0:	Buffer Byte Counter */
+
+/*	TxStat		Transmit Frame Status Word */
+/*	RxStat		Receive Frame Status Word */
+/*
+ *Note: TxStat is reserved for ASIC loopback mode only
+ *
+ *	The Bits of the Status words are defined in xmac_ii.h
+ *	(see XMR_FS bits)
+ */
+
+/* macros ********************************************************************/
+
+/* Receive and Transmit Queues */
+#define Q_R1	0x0000		/* Receive Queue 1 */
+#define Q_R2	0x0080		/* Receive Queue 2 */
+#define Q_XS1	0x0200		/* Synchronous Transmit Queue 1 */
+#define Q_XA1	0x0280		/* Asynchronous Transmit Queue 1 */
+#define Q_XS2	0x0300		/* Synchronous Transmit Queue 2 */
+#define Q_XA2	0x0380		/* Asynchronous Transmit Queue 2 */
+
+/*
+ *	Macro Q_ADDR()
+ *
+ *	Use this macro to access the Receive and Transmit Queue Registers.
+ *
+ * para:
+ *	Queue	Queue to access.
+ *				Values: Q_R1, Q_R2, Q_XS1, Q_XA1, Q_XS2, and Q_XA2
+ *	Offs	Queue register offset.
+ *				Values: Q_D, Q_DA_L ... Q_T2, Q_T3
+ *
+ * usage	SK_IN32(pAC, Q_ADDR(Q_R2, Q_BC), pVal)
+ */
+#define Q_ADDR(Queue, Offs)	(B8_Q_REGS + (Queue) + (Offs))
+
+/*
+ *	Macro RB_ADDR()
+ *
+ *	Use this macro to access the RAM Buffer Registers.
+ *
+ * para:
+ *	Queue	Queue to access.
+ *				Values: Q_R1, Q_R2, Q_XS1, Q_XA1, Q_XS2, and Q_XA2
+ *	Offs	Queue register offset.
+ *				Values: RB_START, RB_END ... RB_LEV, RB_CTRL
+ *
+ * usage	SK_IN32(pAC, RB_ADDR(Q_R2, RB_RP), pVal)
+ */
+#define RB_ADDR(Queue, Offs)	(B16_RAM_REGS + (Queue) + (Offs))
+
+
+/* MAC Related Registers */
+#define MAC_1		0	/* belongs to the port near the slot */
+#define MAC_2		1	/* belongs to the port far away from the slot */
+
+/*
+ *	Macro MR_ADDR()
+ *
+ *	Use this macro to access a MAC Related Registers inside the ASIC.
+ *
+ * para:
+ *	Mac		MAC to access.
+ *				Values: MAC_1, MAC_2
+ *	Offs	MAC register offset.
+ *				Values: RX_MFF_EA, RX_MFF_WP ... LNK_LED_REG,
+ *						TX_MFF_EA, TX_MFF_WP ... TX_LED_TST
+ *
+ * usage	SK_IN32(pAC, MR_ADDR(MAC_1, TX_MFF_EA), pVal)
+ */
+#define MR_ADDR(Mac, Offs)	(((Mac) << 7) + (Offs))
+
+#ifdef	SK_LITTLE_ENDIAN
+#define XM_WORD_LO	0
+#define XM_WORD_HI	1
+#else	/* !SK_LITTLE_ENDIAN */
+#define XM_WORD_LO	1
+#define XM_WORD_HI	0
+#endif	/* !SK_LITTLE_ENDIAN */
+
+
+/*
+ * macros to access the XMAC (GENESIS only)
+ *
+ * XM_IN16(),		to read a 16 bit register (e.g. XM_MMU_CMD)
+ * XM_OUT16(),		to write a 16 bit register (e.g. XM_MMU_CMD)
+ * XM_IN32(),		to read a 32 bit register (e.g. XM_TX_EV_CNT)
+ * XM_OUT32(),		to write a 32 bit register (e.g. XM_TX_EV_CNT)
+ * XM_INADDR(),		to read a network address register (e.g. XM_SRC_CHK)
+ * XM_OUTADDR(),	to write a network address register (e.g. XM_SRC_CHK)
+ * XM_INHASH(),		to read the XM_HSM_CHK register
+ * XM_OUTHASH()		to write the XM_HSM_CHK register
+ *
+ * para:
+ *	Mac		XMAC to access		values: MAC_1 or MAC_2
+ *	IoC		I/O context needed for SK I/O macros
+ *	Reg		XMAC Register to read or write
+ *	(p)Val	Value or pointer to the value which should be read or written
+ *
+ * usage:	XM_OUT16(IoC, MAC_1, XM_MMU_CMD, Value);
+ */
+
+#define XMA(Mac, Reg)									\
+	((BASE_XMAC_1 + (Mac) * (BASE_XMAC_2 - BASE_XMAC_1)) | ((Reg) << 1))
+
+#define XM_IN16(IoC, Mac, Reg, pVal)					\
+	SK_IN16((IoC), XMA((Mac), (Reg)), (pVal))
+
+#define XM_OUT16(IoC, Mac, Reg, Val)					\
+	SK_OUT16((IoC), XMA((Mac), (Reg)), (Val))
+
+#define XM_IN32(IoC, Mac, Reg, pVal) {					\
+	SK_IN16((IoC), XMA((Mac), (Reg)),					\
+		(SK_U16 SK_FAR*)&((SK_U16 SK_FAR*)(pVal))[XM_WORD_LO]);		\
+	SK_IN16((IoC), XMA((Mac), (Reg+2)),					\
+		(SK_U16 SK_FAR*)&((SK_U16 SK_FAR*)(pVal))[XM_WORD_HI]);		\
+}
+
+#define XM_OUT32(IoC, Mac, Reg, Val) {										\
+	SK_OUT16((IoC), XMA((Mac), (Reg)), (SK_U16)((Val) & 0xffffL));			\
+	SK_OUT16((IoC), XMA((Mac), (Reg+2)), (SK_U16)(((Val) >> 16) & 0xffffL));\
+}
+
+/* Remember: we are always writing to / reading from LITTLE ENDIAN memory */
+
+#define XM_INADDR(IoC, Mac, Reg, pVal) {				\
+	SK_U16	Word;										\
+	SK_U8	*pByte;										\
+	pByte = (SK_U8 *)&((SK_U8 *)(pVal))[0];				\
+	SK_IN16((IoC), XMA((Mac), (Reg)), &Word);			\
+	pByte[0] = (SK_U8)(Word  & 0x00ff);					\
+	pByte[1] = (SK_U8)((Word >> 8) & 0x00ff);			\
+	SK_IN16((IoC), XMA((Mac), (Reg+2)), &Word);			\
+	pByte[2] = (SK_U8)(Word  & 0x00ff);					\
+	pByte[3] = (SK_U8)((Word >> 8) & 0x00ff);			\
+	SK_IN16((IoC), XMA((Mac), (Reg+4)), &Word);			\
+	pByte[4] = (SK_U8)(Word  & 0x00ff);					\
+	pByte[5] = (SK_U8)((Word >> 8) & 0x00ff);			\
+}
+
+#define XM_OUTADDR(IoC, Mac, Reg, pVal) {				\
+	SK_U8	SK_FAR *pByte;								\
+	pByte = (SK_U8 SK_FAR *)&((SK_U8 SK_FAR *)(pVal))[0];	\
+	SK_OUT16((IoC), XMA((Mac), (Reg)), (SK_U16)			\
+		(((SK_U16)(pByte[0]) & 0x00ff) |				\
+		(((SK_U16)(pByte[1]) << 8) & 0xff00)));			\
+	SK_OUT16((IoC), XMA((Mac), (Reg+2)), (SK_U16)		\
+		(((SK_U16)(pByte[2]) & 0x00ff) |				\
+		(((SK_U16)(pByte[3]) << 8) & 0xff00)));			\
+	SK_OUT16((IoC), XMA((Mac), (Reg+4)), (SK_U16)		\
+		(((SK_U16)(pByte[4]) & 0x00ff) |				\
+		(((SK_U16)(pByte[5]) << 8) & 0xff00)));			\
+}
+
+#define XM_INHASH(IoC, Mac, Reg, pVal) {				\
+	SK_U16	Word;										\
+	SK_U8	SK_FAR *pByte;								\
+	pByte = (SK_U8 SK_FAR *)&((SK_U8 SK_FAR *)(pVal))[0];	\
+	SK_IN16((IoC), XMA((Mac), (Reg)), &Word);			\
+	pByte[0] = (SK_U8)(Word  & 0x00ff);					\
+	pByte[1] = (SK_U8)((Word >> 8) & 0x00ff);			\
+	SK_IN16((IoC), XMA((Mac), (Reg+2)), &Word);			\
+	pByte[2] = (SK_U8)(Word  & 0x00ff);					\
+	pByte[3] = (SK_U8)((Word >> 8) & 0x00ff);			\
+	SK_IN16((IoC), XMA((Mac), (Reg+4)), &Word);			\
+	pByte[4] = (SK_U8)(Word  & 0x00ff);					\
+	pByte[5] = (SK_U8)((Word >> 8) & 0x00ff);			\
+	SK_IN16((IoC), XMA((Mac), (Reg+6)), &Word);			\
+	pByte[6] = (SK_U8)(Word  & 0x00ff);					\
+	pByte[7] = (SK_U8)((Word >> 8) & 0x00ff);			\
+}
+
+#define XM_OUTHASH(IoC, Mac, Reg, pVal) {				\
+	SK_U8	SK_FAR *pByte;								\
+	pByte = (SK_U8 SK_FAR *)&((SK_U8 SK_FAR *)(pVal))[0];	\
+	SK_OUT16((IoC), XMA((Mac), (Reg)), (SK_U16)			\
+		(((SK_U16)(pByte[0]) & 0x00ff)|					\
+		(((SK_U16)(pByte[1]) << 8) & 0xff00)));			\
+	SK_OUT16((IoC), XMA((Mac), (Reg+2)), (SK_U16)		\
+		(((SK_U16)(pByte[2]) & 0x00ff)|					\
+		(((SK_U16)(pByte[3]) << 8) & 0xff00)));			\
+	SK_OUT16((IoC), XMA((Mac), (Reg+4)), (SK_U16)		\
+		(((SK_U16)(pByte[4]) & 0x00ff)|					\
+		(((SK_U16)(pByte[5]) << 8) & 0xff00)));			\
+	SK_OUT16((IoC), XMA((Mac), (Reg+6)), (SK_U16)		\
+		(((SK_U16)(pByte[6]) & 0x00ff)|					\
+		(((SK_U16)(pByte[7]) << 8) & 0xff00)));			\
+}
+
+/*
+ * macros to access the GMAC (YUKON only)
+ *
+ * GM_IN16(),		to read  a 16 bit register (e.g. GM_GP_STAT)
+ * GM_OUT16(),		to write a 16 bit register (e.g. GM_GP_CTRL)
+ * GM_IN32(),		to read  a 32 bit register (e.g. GM_)
+ * GM_OUT32(),		to write a 32 bit register (e.g. GM_)
+ * GM_INADDR(),		to read  a network address register (e.g. GM_SRC_ADDR_1L)
+ * GM_OUTADDR(),	to write a network address register (e.g. GM_SRC_ADDR_2L)
+ * GM_INHASH(),		to read  the GM_MC_ADDR_H1 register
+ * GM_OUTHASH()		to write the GM_MC_ADDR_H1 register
+ *
+ * para:
+ *	Mac		GMAC to access		values: MAC_1 or MAC_2
+ *	IoC		I/O context needed for SK I/O macros
+ *	Reg		GMAC Register to read or write
+ *	(p)Val	Value or pointer to the value which should be read or written
+ *
+ * usage:	GM_OUT16(IoC, MAC_1, GM_GP_CTRL, Value);
+ */
+
+#define GMA(Mac, Reg)									\
+	((BASE_GMAC_1 + (Mac) * (BASE_GMAC_2 - BASE_GMAC_1)) | (Reg))
+
+#define GM_IN16(IoC, Mac, Reg, pVal)					\
+	SK_IN16((IoC), GMA((Mac), (Reg)), (pVal))
+
+#define GM_OUT16(IoC, Mac, Reg, Val)					\
+	SK_OUT16((IoC), GMA((Mac), (Reg)), (Val))
+
+#define GM_IN32(IoC, Mac, Reg, pVal) {					\
+	SK_IN16((IoC), GMA((Mac), (Reg)),					\
+		(SK_U16 SK_FAR*)&((SK_U16 SK_FAR*)(pVal))[XM_WORD_LO]);		\
+	SK_IN16((IoC), GMA((Mac), (Reg+4)),					\
+		(SK_U16 SK_FAR*)&((SK_U16 SK_FAR*)(pVal))[XM_WORD_HI]);		\
+}
+
+#define GM_OUT32(IoC, Mac, Reg, Val) {										\
+	SK_OUT16((IoC), GMA((Mac), (Reg)), (SK_U16)((Val) & 0xffffL));			\
+	SK_OUT16((IoC), GMA((Mac), (Reg+4)), (SK_U16)(((Val) >> 16) & 0xffffL));\
+}
+
+#define GM_INADDR(IoC, Mac, Reg, pVal) {				\
+	SK_U16	Word;										\
+	SK_U8	*pByte;										\
+	pByte = (SK_U8 *)&((SK_U8 *)(pVal))[0];				\
+	SK_IN16((IoC), GMA((Mac), (Reg)), &Word);			\
+	pByte[0] = (SK_U8)(Word  & 0x00ff);					\
+	pByte[1] = (SK_U8)((Word >> 8) & 0x00ff);			\
+	SK_IN16((IoC), GMA((Mac), (Reg+4)), &Word);			\
+	pByte[2] = (SK_U8)(Word  & 0x00ff);					\
+	pByte[3] = (SK_U8)((Word >> 8) & 0x00ff);			\
+	SK_IN16((IoC), GMA((Mac), (Reg+8)), &Word);			\
+	pByte[4] = (SK_U8)(Word  & 0x00ff);					\
+	pByte[5] = (SK_U8)((Word >> 8) & 0x00ff);			\
+}
+
+#define GM_OUTADDR(IoC, Mac, Reg, pVal) {				\
+	SK_U8	SK_FAR *pByte;								\
+	pByte = (SK_U8 SK_FAR *)&((SK_U8 SK_FAR *)(pVal))[0];	\
+	SK_OUT16((IoC), GMA((Mac), (Reg)), (SK_U16)			\
+		(((SK_U16)(pByte[0]) & 0x00ff) |				\
+		(((SK_U16)(pByte[1]) << 8) & 0xff00)));			\
+	SK_OUT16((IoC), GMA((Mac), (Reg+4)), (SK_U16)		\
+		(((SK_U16)(pByte[2]) & 0x00ff) |				\
+		(((SK_U16)(pByte[3]) << 8) & 0xff00)));			\
+	SK_OUT16((IoC), GMA((Mac), (Reg+8)), (SK_U16)		\
+		(((SK_U16)(pByte[4]) & 0x00ff) |				\
+		(((SK_U16)(pByte[5]) << 8) & 0xff00)));			\
+}
+
+#define GM_INHASH(IoC, Mac, Reg, pVal) {				\
+	SK_U16	Word;										\
+	SK_U8	*pByte;										\
+	pByte = (SK_U8 *)&((SK_U8 *)(pVal))[0];				\
+	SK_IN16((IoC), GMA((Mac), (Reg)), &Word);			\
+	pByte[0] = (SK_U8)(Word  & 0x00ff);					\
+	pByte[1] = (SK_U8)((Word >> 8) & 0x00ff);			\
+	SK_IN16((IoC), GMA((Mac), (Reg+4)), &Word);			\
+	pByte[2] = (SK_U8)(Word  & 0x00ff);					\
+	pByte[3] = (SK_U8)((Word >> 8) & 0x00ff);			\
+	SK_IN16((IoC), GMA((Mac), (Reg+8)), &Word);			\
+	pByte[4] = (SK_U8)(Word  & 0x00ff);					\
+	pByte[5] = (SK_U8)((Word >> 8) & 0x00ff);			\
+	SK_IN16((IoC), GMA((Mac), (Reg+12)), &Word);		\
+	pByte[6] = (SK_U8)(Word  & 0x00ff);					\
+	pByte[7] = (SK_U8)((Word >> 8) & 0x00ff);			\
+}
+
+#define GM_OUTHASH(IoC, Mac, Reg, pVal) {				\
+	SK_U8	*pByte;										\
+	pByte = (SK_U8 *)&((SK_U8 *)(pVal))[0];				\
+	SK_OUT16((IoC), GMA((Mac), (Reg)), (SK_U16)			\
+		(((SK_U16)(pByte[0]) & 0x00ff)|					\
+		(((SK_U16)(pByte[1]) << 8) & 0xff00)));			\
+	SK_OUT16((IoC), GMA((Mac), (Reg+4)), (SK_U16)		\
+		(((SK_U16)(pByte[2]) & 0x00ff)|					\
+		(((SK_U16)(pByte[3]) << 8) & 0xff00)));			\
+	SK_OUT16((IoC), GMA((Mac), (Reg+8)), (SK_U16)		\
+		(((SK_U16)(pByte[4]) & 0x00ff)|					\
+		(((SK_U16)(pByte[5]) << 8) & 0xff00)));			\
+	SK_OUT16((IoC), GMA((Mac), (Reg+12)), (SK_U16)		\
+		(((SK_U16)(pByte[6]) & 0x00ff)|					\
+		(((SK_U16)(pByte[7]) << 8) & 0xff00)));			\
+}
+
+/*
+ * Different MAC Types
+ */
+#define SK_MAC_XMAC		0	/* Xaqti XMAC II */
+#define SK_MAC_GMAC		1	/* Marvell GMAC */
+
+/*
+ * Different PHY Types
+ */
+#define SK_PHY_XMAC			0	/* integrated in XMAC II */
+#define SK_PHY_BCOM			1	/* Broadcom BCM5400 */
+#define SK_PHY_LONE			2	/* Level One LXT1000 */
+#define SK_PHY_NAT			3	/* National DP83891 */
+#define SK_PHY_MARV_COPPER	4	/* Marvell 88E1011S */
+#define SK_PHY_MARV_FIBER	5	/* Marvell 88E1011S working on fiber */
+
+/*
+ * PHY addresses (bits 12..8 of PHY address reg)
+ */
+#define PHY_ADDR_XMAC	(0<<8)
+#define PHY_ADDR_BCOM	(1<<8)
+#define PHY_ADDR_LONE	(3<<8)
+#define PHY_ADDR_NAT	(0<<8)
+
+/* GPHY address (bits 15..11 of SMI control reg) */
+#define PHY_ADDR_MARV	0
+
+/*
+ * macros to access the PHY
+ *
+ * PHY_READ()		read a 16 bit value from the PHY
+ * PHY_WRITE()		write a 16 bit value to the PHY
+ *
+ * para:
+ * 	IoC		I/O context needed for SK I/O macros
+ * 	pPort	Pointer to port struct for PhyAddr
+ * 	Mac		XMAC to access		values: MAC_1 or MAC_2
+ * 	PhyReg	PHY Register to read or write
+ * 	(p)Val	Value or pointer to the value which should be read or
+ *			written.
+ *
+ * usage:	PHY_READ(IoC, pPort, MAC_1, PHY_CTRL, Value);
+ * Warning: a PHY_READ on an uninitialized PHY (PHY still in reset) never
+ *          comes back. This is checked in DEBUG mode.
+ */
+#ifndef DEBUG
+#define PHY_READ(IoC, pPort, Mac, PhyReg, pVal) {						\
+	SK_U16 Mmu;  														\
+																		\
+	XM_OUT16((IoC), (Mac), XM_PHY_ADDR, (PhyReg) | (pPort)->PhyAddr);	\
+	XM_IN16((IoC), (Mac), XM_PHY_DATA, (pVal));							\
+	if ((pPort)->PhyType != SK_PHY_XMAC) {								\
+		do {  															\
+			XM_IN16((IoC), (Mac), XM_MMU_CMD, &Mmu);					\
+		} while ((Mmu & XM_MMU_PHY_RDY) == 0);							\
+		XM_IN16((IoC), (Mac), XM_PHY_DATA, (pVal));						\
+	}  																	\
+}
+#else
+#define PHY_READ(IoC, pPort, Mac, PhyReg, pVal) {						\
+	SK_U16 Mmu;  														\
+	int __i = 0;														\
+																		\
+	XM_OUT16((IoC), (Mac), XM_PHY_ADDR, (PhyReg) | (pPort)->PhyAddr);	\
+	XM_IN16((IoC), (Mac), XM_PHY_DATA, (pVal));							\
+	if ((pPort)->PhyType != SK_PHY_XMAC) {								\
+		do {  															\
+			XM_IN16((IoC), (Mac), XM_MMU_CMD, &Mmu);					\
+			__i++;														\
+			if (__i > 100000) {											\
+				SK_DBG_PRINTF("*****************************\n");		\
+				SK_DBG_PRINTF("PHY_READ on uninitialized PHY\n");		\
+				SK_DBG_PRINTF("*****************************\n");		\
+				break;													\
+			}															\
+		} while ((Mmu & XM_MMU_PHY_RDY) == 0);							\
+		XM_IN16((IoC), (Mac), XM_PHY_DATA, (pVal));						\
+	}  																	\
+}
+#endif /* DEBUG */
+
+#define PHY_WRITE(IoC, pPort, Mac, PhyReg, Val) {						\
+	SK_U16 Mmu;															\
+																		\
+	if ((pPort)->PhyType != SK_PHY_XMAC) {								\
+		do {  															\
+			XM_IN16((IoC), (Mac), XM_MMU_CMD, &Mmu);					\
+		} while ((Mmu & XM_MMU_PHY_BUSY) != 0);							\
+	}  																	\
+	XM_OUT16((IoC), (Mac), XM_PHY_ADDR, (PhyReg) | (pPort)->PhyAddr);	\
+	XM_OUT16((IoC), (Mac), XM_PHY_DATA, (Val));							\
+	if ((pPort)->PhyType != SK_PHY_XMAC) {								\
+		do {  															\
+			XM_IN16((IoC), (Mac), XM_MMU_CMD, &Mmu);					\
+		} while ((Mmu & XM_MMU_PHY_BUSY) != 0);							\
+	}  																	\
+}
+
+/*
+ *	Macro PCI_C()
+ *
+ *	Use this macro to access PCI config register from the I/O space.
+ *
+ * para:
+ *	Addr	PCI configuration register to access.
+ *			Values:	PCI_VENDOR_ID ... PCI_VPD_ADR_REG,
+ *
+ * usage	SK_IN16(pAC, PCI_C(PCI_VENDOR_ID), pVal);
+ */
+#define PCI_C(Addr)	(B7_CFG_SPC + (Addr))	/* PCI Config Space */
+
+/*
+ *	Macro SK_HW_ADDR(Base, Addr)
+ *
+ *	Calculates the effective HW address
+ *
+ * para:
+ *	Base	I/O or memory base address
+ *	Addr	Address offset
+ *
+ * usage:	May be used in SK_INxx and SK_OUTxx macros
+ *		#define SK_IN8(pAC, Addr, pVal) ...\
+ *			*pVal = (SK_U8)inp(SK_HW_ADDR(pAC->Hw.Iop, Addr)))
+ */
+#ifdef SK_MEM_MAPPED_IO
+#define SK_HW_ADDR(Base, Addr)	((Base) + (Addr))
+#else  /* SK_MEM_MAPPED_IO */
+#define SK_HW_ADDR(Base, Addr)	\
+			((Base) + (((Addr) & 0x7f) | (((Addr) >> 7 > 0) ? 0x80 : 0)))
+#endif /* SK_MEM_MAPPED_IO */
+
+#define SZ_LONG	(sizeof(SK_U32))
+
+/*
+ *	Macro SK_HWAC_LINK_LED()
+ *
+ *	Use this macro to set the link LED mode.
+ * para:
+ *	pAC		Pointer to adapter context struct
+ *	IoC		I/O context needed for SK I/O macros
+ *  Port	Port number
+ *	Mode	Mode to set for this LED
+ */
+#define SK_HWAC_LINK_LED(pAC, IoC, Port, Mode) \
+	SK_OUT8(IoC, MR_ADDR(Port, LNK_LED_REG), Mode);
+
+
+/* typedefs *******************************************************************/
+
+
+/* function prototypes ********************************************************/
+
+#ifdef __cplusplus
+}
+#endif	/* __cplusplus */
+
+#endif	/* __INC_SKGEHW_H */
diff --git a/drivers/net/sk98lin/h/skgehwt.h b/drivers/net/sk98lin/h/skgehwt.h
new file mode 100644
index 0000000..e6b0016
--- /dev/null
+++ b/drivers/net/sk98lin/h/skgehwt.h
@@ -0,0 +1,48 @@
+/******************************************************************************
+ *
+ * Name:	skhwt.h
+ * Project:	Gigabit Ethernet Adapters, Event Scheduler Module
+ * Version:	$Revision: 1.7 $
+ * Date:	$Date: 2003/09/16 12:55:08 $
+ * Purpose:	Defines for the hardware timer functions
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *	(C)Copyright 1998-2002 SysKonnect GmbH.
+ *	(C)Copyright 2002-2003 Marvell.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/*
+ * SKGEHWT.H	contains all defines and types for the timer functions
+ */
+
+#ifndef	_SKGEHWT_H_
+#define _SKGEHWT_H_
+
+/*
+ * SK Hardware Timer
+ * - needed wherever the HWT module is used
+ * - use in Adapters context name pAC->Hwt
+ */
+typedef	struct s_Hwt {
+	SK_U32		TStart;	/* HWT start */
+	SK_U32		TStop;	/* HWT stop */
+	int		TActive;	/* HWT: flag : active/inactive */
+} SK_HWT;
+
+extern void SkHwtInit(SK_AC *pAC, SK_IOC Ioc);
+extern void SkHwtStart(SK_AC *pAC, SK_IOC Ioc, SK_U32 Time);
+extern void SkHwtStop(SK_AC *pAC, SK_IOC Ioc);
+extern SK_U32 SkHwtRead(SK_AC *pAC, SK_IOC Ioc);
+extern void SkHwtIsr(SK_AC *pAC, SK_IOC Ioc);
+#endif	/* _SKGEHWT_H_ */
diff --git a/drivers/net/sk98lin/h/skgei2c.h b/drivers/net/sk98lin/h/skgei2c.h
new file mode 100644
index 0000000..d9b6f6d
--- /dev/null
+++ b/drivers/net/sk98lin/h/skgei2c.h
@@ -0,0 +1,210 @@
+/******************************************************************************
+ *
+ * Name:	skgei2c.h
+ * Project:	Gigabit Ethernet Adapters, TWSI-Module
+ * Version:	$Revision: 1.25 $
+ * Date:	$Date: 2003/10/20 09:06:05 $
+ * Purpose:	Special defines for TWSI
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *	(C)Copyright 1998-2002 SysKonnect.
+ *	(C)Copyright 2002-2003 Marvell.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/*
+ * SKGEI2C.H	contains all SK-98xx specific defines for the TWSI handling
+ */
+
+#ifndef _INC_SKGEI2C_H_
+#define _INC_SKGEI2C_H_
+
+/*
+ * Macros to access the B2_I2C_CTRL
+ */
+#define SK_I2C_CTL(IoC, flag, dev, dev_size, reg, burst) \
+	SK_OUT32(IoC, B2_I2C_CTRL,\
+		(flag ? 0x80000000UL : 0x0L) | \
+		(((SK_U32)reg << 16) & I2C_ADDR) | \
+		(((SK_U32)dev << 9) & I2C_DEV_SEL) | \
+		(dev_size & I2C_DEV_SIZE) | \
+		((burst << 4) & I2C_BURST_LEN))
+
+#define SK_I2C_STOP(IoC) {				\
+	SK_U32	I2cCtrl;				\
+	SK_IN32(IoC, B2_I2C_CTRL, &I2cCtrl);		\
+	SK_OUT32(IoC, B2_I2C_CTRL, I2cCtrl | I2C_STOP);	\
+}
+
+#define SK_I2C_GET_CTL(IoC, pI2cCtrl)	SK_IN32(IoC, B2_I2C_CTRL, pI2cCtrl)
+
+/*
+ * Macros to access the TWSI SW Registers
+ */
+#define SK_I2C_SET_BIT(IoC, SetBits) {			\
+	SK_U8	OrgBits;				\
+	SK_IN8(IoC, B2_I2C_SW, &OrgBits);		\
+	SK_OUT8(IoC, B2_I2C_SW, OrgBits | (SK_U8)(SetBits));	\
+}
+
+#define SK_I2C_CLR_BIT(IoC, ClrBits) {			\
+	SK_U8	OrgBits;				\
+	SK_IN8(IoC, B2_I2C_SW, &OrgBits);		\
+	SK_OUT8(IoC, B2_I2C_SW, OrgBits & ~((SK_U8)(ClrBits)));	\
+}
+
+#define SK_I2C_GET_SW(IoC, pI2cSw)	SK_IN8(IoC, B2_I2C_SW, pI2cSw)
+
+/*
+ * define the possible sensor states
+ */
+#define	SK_SEN_IDLE		0	/* Idle: sensor not read */
+#define	SK_SEN_VALUE	1	/* Value Read cycle */
+#define	SK_SEN_VALEXT	2	/* Extended Value Read cycle */
+
+/*
+ * Conversion factor to convert read Voltage sensor to milli Volt
+ * Conversion factor to convert read Temperature sensor to 10th degree Celsius
+ */
+#define	SK_LM80_VT_LSB		22	/* 22mV LSB resolution */
+#define	SK_LM80_TEMP_LSB	10	/* 1 degree LSB resolution */
+#define	SK_LM80_TEMPEXT_LSB	 5	/* 0.5 degree LSB resolution for ext. val. */
+
+/*
+ * formula: counter = (22500*60)/(rpm * divisor * pulses/2)
+ * assuming: 6500rpm, 4 pulses, divisor 1
+ */
+#define SK_LM80_FAN_FAKTOR	((22500L*60)/(1*2))
+
+/*
+ * Define sensor management data
+ * Maximum is reached on Genesis copper dual port and Yukon-64
+ * Board specific maximum is in pAC->I2c.MaxSens
+ */
+#define	SK_MAX_SENSORS	8	/* maximal no. of installed sensors */
+#define	SK_MIN_SENSORS	5	/* minimal no. of installed sensors */
+
+/*
+ * To watch the state machine (SM) use the timer in two ways
+ * instead of one as hitherto
+ */
+#define	SK_TIMER_WATCH_SM		0	/* Watch the SM to finish in a spec. time */
+#define	SK_TIMER_NEW_GAUGING	1	/* Start a new gauging when timer expires */
+
+/*
+ * Defines for the individual thresholds
+ */
+
+/* Temperature sensor */
+#define	SK_SEN_TEMP_HIGH_ERR	800	/* Temperature High Err  Threshold */
+#define	SK_SEN_TEMP_HIGH_WARN	700	/* Temperature High Warn Threshold */
+#define	SK_SEN_TEMP_LOW_WARN	100	/* Temperature Low  Warn Threshold */
+#define	SK_SEN_TEMP_LOW_ERR		  0	/* Temperature Low  Err  Threshold */
+
+/* VCC which should be 5 V */
+#define	SK_SEN_PCI_5V_HIGH_ERR		5588	/* Voltage PCI High Err  Threshold */
+#define	SK_SEN_PCI_5V_HIGH_WARN		5346	/* Voltage PCI High Warn Threshold */
+#define	SK_SEN_PCI_5V_LOW_WARN		4664	/* Voltage PCI Low  Warn Threshold */
+#define	SK_SEN_PCI_5V_LOW_ERR		4422	/* Voltage PCI Low  Err  Threshold */
+
+/*
+ * VIO may be 5 V or 3.3 V. Initialization takes two parts:
+ * 1. Initialize lowest lower limit and highest higher limit.
+ * 2. After the first value is read correct the upper or the lower limit to
+ *    the appropriate C constant.
+ *
+ * Warning limits are +-5% of the exepected voltage.
+ * Error limits are +-10% of the expected voltage.
+ */
+
+/* Bug fix AF: 16.Aug.2001: Correct the init base of LM80 sensor */
+
+#define	SK_SEN_PCI_IO_5V_HIGH_ERR	5566	/* + 10% V PCI-IO High Err Threshold */
+#define	SK_SEN_PCI_IO_5V_HIGH_WARN	5324	/* +  5% V PCI-IO High Warn Threshold */
+					/*		5000	mVolt */
+#define	SK_SEN_PCI_IO_5V_LOW_WARN	4686	/* -  5% V PCI-IO Low Warn Threshold */
+#define	SK_SEN_PCI_IO_5V_LOW_ERR	4444	/* - 10% V PCI-IO Low Err Threshold */
+
+#define	SK_SEN_PCI_IO_RANGE_LIMITER	4000	/* 4000 mV range delimiter */
+
+/* correction values for the second pass */
+#define	SK_SEN_PCI_IO_3V3_HIGH_ERR	3850	/* + 15% V PCI-IO High Err Threshold */
+#define	SK_SEN_PCI_IO_3V3_HIGH_WARN	3674	/* + 10% V PCI-IO High Warn Threshold */
+					/*		3300	mVolt */
+#define	SK_SEN_PCI_IO_3V3_LOW_WARN	2926	/* - 10% V PCI-IO Low Warn Threshold */
+#define	SK_SEN_PCI_IO_3V3_LOW_ERR	2772	/* - 15% V PCI-IO Low Err  Threshold */
+
+/*
+ * VDD voltage
+ */
+#define	SK_SEN_VDD_HIGH_ERR		3630	/* Voltage ASIC High Err  Threshold */
+#define	SK_SEN_VDD_HIGH_WARN	3476	/* Voltage ASIC High Warn Threshold */
+#define	SK_SEN_VDD_LOW_WARN		3146	/* Voltage ASIC Low  Warn Threshold */
+#define	SK_SEN_VDD_LOW_ERR		2970	/* Voltage ASIC Low  Err  Threshold */
+
+/*
+ * PHY PLL 3V3 voltage
+ */
+#define	SK_SEN_PLL_3V3_HIGH_ERR		3630	/* Voltage PMA High Err  Threshold */
+#define	SK_SEN_PLL_3V3_HIGH_WARN	3476	/* Voltage PMA High Warn Threshold */
+#define	SK_SEN_PLL_3V3_LOW_WARN		3146	/* Voltage PMA Low  Warn Threshold */
+#define	SK_SEN_PLL_3V3_LOW_ERR		2970	/* Voltage PMA Low  Err  Threshold */
+
+/*
+ * VAUX (YUKON only)
+ */
+#define	SK_SEN_VAUX_3V3_HIGH_ERR	3630	/* Voltage VAUX High Err Threshold */
+#define	SK_SEN_VAUX_3V3_HIGH_WARN	3476	/* Voltage VAUX High Warn Threshold */
+#define	SK_SEN_VAUX_3V3_LOW_WARN	3146	/* Voltage VAUX Low Warn Threshold */
+#define	SK_SEN_VAUX_3V3_LOW_ERR		2970	/* Voltage VAUX Low Err Threshold */
+#define	SK_SEN_VAUX_0V_WARN_ERR		   0	/* if VAUX not present */
+#define	SK_SEN_VAUX_RANGE_LIMITER	1000	/* 1000 mV range delimiter */
+
+/*
+ * PHY 2V5 voltage
+ */
+#define	SK_SEN_PHY_2V5_HIGH_ERR		2750	/* Voltage PHY High Err Threshold */
+#define	SK_SEN_PHY_2V5_HIGH_WARN	2640	/* Voltage PHY High Warn Threshold */
+#define	SK_SEN_PHY_2V5_LOW_WARN		2376	/* Voltage PHY Low Warn Threshold */
+#define	SK_SEN_PHY_2V5_LOW_ERR		2222	/* Voltage PHY Low Err Threshold */
+
+/*
+ * ASIC Core 1V5 voltage (YUKON only)
+ */
+#define	SK_SEN_CORE_1V5_HIGH_ERR	1650	/* Voltage ASIC Core High Err Threshold */
+#define	SK_SEN_CORE_1V5_HIGH_WARN	1575	/* Voltage ASIC Core High Warn Threshold */
+#define	SK_SEN_CORE_1V5_LOW_WARN	1425	/* Voltage ASIC Core Low Warn Threshold */
+#define	SK_SEN_CORE_1V5_LOW_ERR 	1350	/* Voltage ASIC Core Low Err Threshold */
+
+/*
+ * FAN 1 speed
+ */
+/* assuming: 6500rpm +-15%, 4 pulses,
+ * warning at:	80 %
+ * error at:	70 %
+ * no upper limit
+ */
+#define	SK_SEN_FAN_HIGH_ERR		20000	/* FAN Speed High Err Threshold */
+#define	SK_SEN_FAN_HIGH_WARN	20000	/* FAN Speed High Warn Threshold */
+#define	SK_SEN_FAN_LOW_WARN		 5200	/* FAN Speed Low Warn Threshold */
+#define	SK_SEN_FAN_LOW_ERR		 4550	/* FAN Speed Low Err Threshold */
+
+/*
+ * Some Voltages need dynamic thresholds
+ */
+#define	SK_SEN_DYN_INIT_NONE		 0  /* No dynamic init of thresholds */
+#define	SK_SEN_DYN_INIT_PCI_IO		10  /* Init PCI-IO with new thresholds */
+#define	SK_SEN_DYN_INIT_VAUX		11  /* Init VAUX with new thresholds */
+
+extern	int SkLm80ReadSensor(SK_AC *pAC, SK_IOC IoC, SK_SENSOR *pSen);
+#endif	/* n_INC_SKGEI2C_H */
diff --git a/drivers/net/sk98lin/h/skgeinit.h b/drivers/net/sk98lin/h/skgeinit.h
new file mode 100644
index 0000000..143e635
--- /dev/null
+++ b/drivers/net/sk98lin/h/skgeinit.h
@@ -0,0 +1,797 @@
+/******************************************************************************
+ *
+ * Name:	skgeinit.h
+ * Project:	Gigabit Ethernet Adapters, Common Modules
+ * Version:	$Revision: 1.83 $
+ * Date:	$Date: 2003/09/16 14:07:37 $
+ * Purpose:	Structures and prototypes for the GE Init Module
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *	(C)Copyright 1998-2002 SysKonnect.
+ *	(C)Copyright 2002-2003 Marvell.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+#ifndef __INC_SKGEINIT_H_
+#define __INC_SKGEINIT_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif	/* __cplusplus */
+
+/* defines ********************************************************************/
+
+#define SK_TEST_VAL		0x11335577UL
+
+/* modifying Link LED behaviour (used with SkGeLinkLED()) */
+#define SK_LNK_OFF		LED_OFF
+#define SK_LNK_ON		(LED_ON | LED_BLK_OFF | LED_SYNC_OFF)
+#define SK_LNK_BLINK	(LED_ON | LED_BLK_ON  | LED_SYNC_ON)
+#define SK_LNK_PERM		(LED_ON | LED_BLK_OFF | LED_SYNC_ON)
+#define SK_LNK_TST		(LED_ON | LED_BLK_ON  | LED_SYNC_OFF)
+
+/* parameter 'Mode' when calling SK_HWAC_LINK_LED() */
+#define SK_LED_OFF		LED_OFF
+#define SK_LED_ACTIVE	(LED_ON | LED_BLK_OFF | LED_SYNC_OFF)
+#define SK_LED_STANDBY	(LED_ON | LED_BLK_ON  | LED_SYNC_OFF)
+
+/* addressing LED Registers in SkGeXmitLED() */
+#define XMIT_LED_INI	0
+#define XMIT_LED_CNT	(RX_LED_VAL - RX_LED_INI)
+#define XMIT_LED_CTRL	(RX_LED_CTRL- RX_LED_INI)
+#define XMIT_LED_TST	(RX_LED_TST - RX_LED_INI)
+
+/* parameter 'Mode' when calling SkGeXmitLED() */
+#define SK_LED_DIS	0
+#define SK_LED_ENA	1
+#define SK_LED_TST	2
+
+/* Counter and Timer constants, for a host clock of 62.5 MHz */
+#define SK_XMIT_DUR		0x002faf08UL	/*  50 ms */
+#define SK_BLK_DUR		0x01dcd650UL	/* 500 ms */
+
+#define SK_DPOLL_DEF	0x00ee6b28UL	/* 250 ms at 62.5 MHz */
+
+#define SK_DPOLL_MAX	0x00ffffffUL	/* 268 ms at 62.5 MHz */
+										/* 215 ms at 78.12 MHz */
+
+#define SK_FACT_62		100			/* is given in percent */
+#define SK_FACT_53		 85         /* on GENESIS:	53.12 MHz */
+#define SK_FACT_78		125			/* on YUKON:	78.12 MHz */
+
+/* Timeout values */
+#define SK_MAC_TO_53	72			/* MAC arbiter timeout */
+#define SK_PKT_TO_53	0x2000		/* Packet arbiter timeout */
+#define SK_PKT_TO_MAX	0xffff		/* Maximum value */
+#define SK_RI_TO_53		36			/* RAM interface timeout */
+
+#define SK_PHY_ACC_TO	600000		/* PHY access timeout */
+
+/* RAM Buffer High Pause Threshold values */
+#define SK_RB_ULPP		( 8 * 1024)	/* Upper Level in kB/8 */
+#define SK_RB_LLPP_S	(10 * 1024)	/* Lower Level for small Queues */
+#define SK_RB_LLPP_B	(16 * 1024)	/* Lower Level for big Queues */
+
+#ifndef SK_BMU_RX_WM
+#define SK_BMU_RX_WM	0x600		/* BMU Rx Watermark */
+#endif
+#ifndef SK_BMU_TX_WM
+#define SK_BMU_TX_WM	0x600		/* BMU Tx Watermark */
+#endif
+
+/* XMAC II Rx High Watermark */
+#define SK_XM_RX_HI_WM	0x05aa		/* 1450 */
+
+/* XMAC II Tx Threshold */
+#define SK_XM_THR_REDL	0x01fb		/* .. for redundant link usage */
+#define SK_XM_THR_SL	0x01fb		/* .. for single link adapters */
+#define SK_XM_THR_MULL	0x01fb		/* .. for multiple link usage */
+#define SK_XM_THR_JUMBO	0x03fc		/* .. for jumbo frame usage */
+
+/* values for GIPortUsage */
+#define SK_RED_LINK		1		/* redundant link usage */
+#define SK_MUL_LINK		2		/* multiple link usage */
+#define SK_JUMBO_LINK	3		/* driver uses jumbo frames */
+
+/* Minimum RAM Buffer Rx Queue Size */
+#define SK_MIN_RXQ_SIZE	16		/* 16 kB */
+
+/* Minimum RAM Buffer Tx Queue Size */
+#define SK_MIN_TXQ_SIZE	16		/* 16 kB */
+
+/* Queue Size units */
+#define QZ_UNITS		0x7
+#define QZ_STEP			8
+
+/* Percentage of queue size from whole memory */
+/* 80 % for receive */
+#define RAM_QUOTA_RX	80L
+/* 0% for sync transfer */
+#define	RAM_QUOTA_SYNC	0L
+/* the rest (20%) is taken for async transfer */
+
+/* Get the rounded queue size in Bytes in 8k steps */
+#define ROUND_QUEUE_SIZE(SizeInBytes)					\
+	((((unsigned long) (SizeInBytes) + (QZ_STEP*1024L)-1) / 1024) &	\
+	~(QZ_STEP-1))
+
+/* Get the rounded queue size in KBytes in 8k steps */
+#define ROUND_QUEUE_SIZE_KB(Kilobytes) \
+	ROUND_QUEUE_SIZE((Kilobytes) * 1024L)
+
+/* Types of RAM Buffer Queues */
+#define SK_RX_SRAM_Q	1	/* small receive queue */
+#define SK_RX_BRAM_Q	2	/* big receive queue */
+#define SK_TX_RAM_Q		3	/* small or big transmit queue */
+
+/* parameter 'Dir' when calling SkGeStopPort() */
+#define SK_STOP_TX	1	/* Stops the transmit path, resets the XMAC */
+#define SK_STOP_RX	2	/* Stops the receive path */
+#define SK_STOP_ALL	3	/* Stops Rx and Tx path, resets the XMAC */
+
+/* parameter 'RstMode' when calling SkGeStopPort() */
+#define SK_SOFT_RST	1	/* perform a software reset */
+#define SK_HARD_RST	2	/* perform a hardware reset */
+
+/* Init Levels */
+#define SK_INIT_DATA	0	/* Init level 0: init data structures */
+#define SK_INIT_IO		1	/* Init level 1: init with IOs */
+#define SK_INIT_RUN		2	/* Init level 2: init for run time */
+
+/* Link Mode Parameter */
+#define SK_LMODE_HALF		1	/* Half Duplex Mode */
+#define SK_LMODE_FULL		2	/* Full Duplex Mode */
+#define SK_LMODE_AUTOHALF	3	/* AutoHalf Duplex Mode */
+#define SK_LMODE_AUTOFULL	4	/* AutoFull Duplex Mode */
+#define SK_LMODE_AUTOBOTH	5	/* AutoBoth Duplex Mode */
+#define SK_LMODE_AUTOSENSE	6	/* configured mode auto sensing */
+#define SK_LMODE_INDETERMINATED	7	/* indeterminated */
+
+/* Auto-negotiation timeout in 100ms granularity */
+#define SK_AND_MAX_TO		6	/* Wait 600 msec before link comes up */
+
+/* Auto-negotiation error codes */
+#define SK_AND_OK			0	/* no error */
+#define SK_AND_OTHER		1	/* other error than below */
+#define SK_AND_DUP_CAP		2	/* Duplex capabilities error */
+
+
+/* Link Speed Capabilities */
+#define SK_LSPEED_CAP_AUTO			(1<<0)	/* Automatic resolution */
+#define SK_LSPEED_CAP_10MBPS		(1<<1)	/* 10 Mbps */
+#define SK_LSPEED_CAP_100MBPS		(1<<2)	/* 100 Mbps */
+#define SK_LSPEED_CAP_1000MBPS		(1<<3)	/* 1000 Mbps */
+#define SK_LSPEED_CAP_INDETERMINATED (1<<4) /* indeterminated */
+
+/* Link Speed Parameter */
+#define SK_LSPEED_AUTO				1	/* Automatic resolution */
+#define SK_LSPEED_10MBPS			2	/* 10 Mbps */
+#define SK_LSPEED_100MBPS			3	/* 100 Mbps */
+#define SK_LSPEED_1000MBPS			4	/* 1000 Mbps */
+#define SK_LSPEED_INDETERMINATED	5	/* indeterminated */
+
+/* Link Speed Current State */
+#define SK_LSPEED_STAT_UNKNOWN		1
+#define SK_LSPEED_STAT_10MBPS		2
+#define SK_LSPEED_STAT_100MBPS 		3
+#define SK_LSPEED_STAT_1000MBPS		4
+#define SK_LSPEED_STAT_INDETERMINATED 5
+
+
+/* Link Capability Parameter */
+#define SK_LMODE_CAP_HALF		(1<<0)	/* Half Duplex Mode */
+#define SK_LMODE_CAP_FULL		(1<<1)	/* Full Duplex Mode */
+#define SK_LMODE_CAP_AUTOHALF	(1<<2)	/* AutoHalf Duplex Mode */
+#define SK_LMODE_CAP_AUTOFULL	(1<<3)	/* AutoFull Duplex Mode */
+#define SK_LMODE_CAP_INDETERMINATED (1<<4) /* indeterminated */
+
+/* Link Mode Current State */
+#define SK_LMODE_STAT_UNKNOWN	1	/* Unknown Duplex Mode */
+#define SK_LMODE_STAT_HALF		2	/* Half Duplex Mode */
+#define SK_LMODE_STAT_FULL		3	/* Full Duplex Mode */
+#define SK_LMODE_STAT_AUTOHALF	4	/* Half Duplex Mode obtained by Auto-Neg */
+#define SK_LMODE_STAT_AUTOFULL	5	/* Full Duplex Mode obtained by Auto-Neg */
+#define SK_LMODE_STAT_INDETERMINATED 6	/* indeterminated */
+
+/* Flow Control Mode Parameter (and capabilities) */
+#define SK_FLOW_MODE_NONE		1	/* No Flow-Control */
+#define SK_FLOW_MODE_LOC_SEND	2	/* Local station sends PAUSE */
+#define SK_FLOW_MODE_SYMMETRIC	3	/* Both stations may send PAUSE */
+#define SK_FLOW_MODE_SYM_OR_REM	4	/* Both stations may send PAUSE or
+					 * just the remote station may send PAUSE
+					 */
+#define SK_FLOW_MODE_INDETERMINATED 5	/* indeterminated */
+
+/* Flow Control Status Parameter */
+#define SK_FLOW_STAT_NONE		1	/* No Flow Control */
+#define SK_FLOW_STAT_REM_SEND	2	/* Remote Station sends PAUSE */
+#define SK_FLOW_STAT_LOC_SEND	3	/* Local station sends PAUSE */
+#define SK_FLOW_STAT_SYMMETRIC	4	/* Both station may send PAUSE */
+#define SK_FLOW_STAT_INDETERMINATED 5	/* indeterminated */
+
+/* Master/Slave Mode Capabilities */
+#define SK_MS_CAP_AUTO		(1<<0)	/* Automatic resolution */
+#define SK_MS_CAP_MASTER	(1<<1)	/* This station is master */
+#define SK_MS_CAP_SLAVE		(1<<2)	/* This station is slave */
+#define SK_MS_CAP_INDETERMINATED (1<<3)	/* indeterminated */
+
+/* Set Master/Slave Mode Parameter (and capabilities) */
+#define SK_MS_MODE_AUTO		1	/* Automatic resolution */
+#define SK_MS_MODE_MASTER	2	/* This station is master */
+#define SK_MS_MODE_SLAVE	3	/* This station is slave */
+#define SK_MS_MODE_INDETERMINATED 4	/* indeterminated */
+
+/* Master/Slave Status Parameter */
+#define SK_MS_STAT_UNSET	1	/* The M/S status is not set */
+#define SK_MS_STAT_MASTER	2	/* This station is master */
+#define SK_MS_STAT_SLAVE	3	/* This station is slave */
+#define SK_MS_STAT_FAULT	4	/* M/S resolution failed */
+#define SK_MS_STAT_INDETERMINATED 5	/* indeterminated */
+
+/* parameter 'Mode' when calling SkXmSetRxCmd() */
+#define SK_STRIP_FCS_ON		(1<<0)	/* Enable  FCS stripping of Rx frames */
+#define SK_STRIP_FCS_OFF	(1<<1)	/* Disable FCS stripping of Rx frames */
+#define SK_STRIP_PAD_ON		(1<<2)	/* Enable  pad byte stripping of Rx fr */
+#define SK_STRIP_PAD_OFF	(1<<3)	/* Disable pad byte stripping of Rx fr */
+#define SK_LENERR_OK_ON		(1<<4)	/* Don't chk fr for in range len error */
+#define SK_LENERR_OK_OFF	(1<<5)	/* Check frames for in range len error */
+#define SK_BIG_PK_OK_ON		(1<<6)	/* Don't set Rx Error bit for big frames */
+#define SK_BIG_PK_OK_OFF	(1<<7)	/* Set Rx Error bit for big frames */
+#define SK_SELF_RX_ON		(1<<8)	/* Enable  Rx of own packets */
+#define SK_SELF_RX_OFF		(1<<9)	/* Disable Rx of own packets */
+
+/* parameter 'Para' when calling SkMacSetRxTxEn() */
+#define SK_MAC_LOOPB_ON		(1<<0)	/* Enable  MAC Loopback Mode */
+#define SK_MAC_LOOPB_OFF	(1<<1)	/* Disable MAC Loopback Mode */
+#define SK_PHY_LOOPB_ON		(1<<2)	/* Enable  PHY Loopback Mode */
+#define SK_PHY_LOOPB_OFF	(1<<3)	/* Disable PHY Loopback Mode */
+#define SK_PHY_FULLD_ON		(1<<4)	/* Enable  GMII Full Duplex */
+#define SK_PHY_FULLD_OFF	(1<<5)	/* Disable GMII Full Duplex */
+
+/* States of PState */
+#define SK_PRT_RESET	0	/* the port is reset */
+#define SK_PRT_STOP		1	/* the port is stopped (similar to SW reset) */
+#define SK_PRT_INIT		2	/* the port is initialized */
+#define SK_PRT_RUN		3	/* the port has an active link */
+
+/* PHY power down modes */
+#define PHY_PM_OPERATIONAL_MODE		0	/* PHY operational mode */
+#define PHY_PM_DEEP_SLEEP			1	/* coma mode --> minimal power */
+#define PHY_PM_IEEE_POWER_DOWN		2	/* IEEE 22.2.4.1.5 compl. power down */
+#define PHY_PM_ENERGY_DETECT		3	/* energy detect */
+#define PHY_PM_ENERGY_DETECT_PLUS	4	/* energy detect plus */
+
+/* Default receive frame limit for Workaround of XMAC Errata */
+#define SK_DEF_RX_WA_LIM	SK_CONSTU64(100)
+
+/* values for GILedBlinkCtrl (LED Blink Control) */
+#define SK_ACT_LED_BLINK	(1<<0)	/* Active LED blinking */
+#define SK_DUP_LED_NORMAL	(1<<1)	/* Duplex LED normal */
+#define SK_LED_LINK100_ON	(1<<2)	/* Link 100M LED on */
+
+/* Link Partner Status */
+#define SK_LIPA_UNKNOWN	0	/* Link partner is in unknown state */
+#define SK_LIPA_MANUAL	1	/* Link partner is in detected manual state */
+#define SK_LIPA_AUTO	2	/* Link partner is in auto-negotiation state */
+
+/* Maximum Restarts before restart is ignored (3Com WA) */
+#define SK_MAX_LRESTART	3	/* Max. 3 times the link is restarted */
+
+/* Max. Auto-neg. timeouts before link detection in sense mode is reset */
+#define SK_MAX_ANEG_TO	10	/* Max. 10 times the sense mode is reset */
+
+/* structures *****************************************************************/
+
+/*
+ * MAC specific functions
+ */
+typedef struct s_GeMacFunc {
+	int  (*pFnMacUpdateStats)(SK_AC *pAC, SK_IOC IoC, unsigned int Port);
+	int  (*pFnMacStatistic)(SK_AC *pAC, SK_IOC IoC, unsigned int Port,
+							SK_U16 StatAddr, SK_U32 SK_FAR *pVal);
+	int  (*pFnMacResetCounter)(SK_AC *pAC, SK_IOC IoC, unsigned int Port);
+	int  (*pFnMacOverflow)(SK_AC *pAC, SK_IOC IoC, unsigned int Port,
+						   SK_U16 IStatus, SK_U64 SK_FAR *pVal);
+} SK_GEMACFUNC;
+
+/*
+ * Port Structure
+ */
+typedef	struct s_GePort {
+#ifndef SK_DIAG
+	SK_TIMER	PWaTimer;	/* Workaround Timer */
+	SK_TIMER	HalfDupChkTimer;
+#endif /* SK_DIAG */
+	SK_U32	PPrevShorts;	/* Previous Short Counter checking */
+	SK_U32	PPrevFcs;		/* Previous FCS Error Counter checking */
+	SK_U64	PPrevRx;		/* Previous RxOk Counter checking */
+	SK_U64	PRxLim;			/* Previous RxOk Counter checking */
+	SK_U64	LastOctets;		/* For half duplex hang check */
+	int		PLinkResCt;		/* Link Restart Counter */
+	int		PAutoNegTimeOut;/* Auto-negotiation timeout current value */
+	int		PAutoNegTOCt;	/* Auto-negotiation Timeout Counter */
+	int		PRxQSize;		/* Port Rx Queue Size in kB */
+	int		PXSQSize;		/* Port Synchronous  Transmit Queue Size in kB */
+	int		PXAQSize;		/* Port Asynchronous Transmit Queue Size in kB */
+	SK_U32	PRxQRamStart;	/* Receive Queue RAM Buffer Start Address */
+	SK_U32	PRxQRamEnd;		/* Receive Queue RAM Buffer End Address */
+	SK_U32	PXsQRamStart;	/* Sync Tx Queue RAM Buffer Start Address */
+	SK_U32	PXsQRamEnd;		/* Sync Tx Queue RAM Buffer End Address */
+	SK_U32	PXaQRamStart;	/* Async Tx Queue RAM Buffer Start Address */
+	SK_U32	PXaQRamEnd;		/* Async Tx Queue RAM Buffer End Address */
+	SK_U32	PRxOverCnt;		/* Receive Overflow Counter */
+	int		PRxQOff;		/* Rx Queue Address Offset */
+	int		PXsQOff;		/* Synchronous Tx Queue Address Offset */
+	int		PXaQOff;		/* Asynchronous Tx Queue Address Offset */
+	int		PhyType;		/* PHY used on this port */
+	int		PState;			/* Port status (reset, stop, init, run) */
+	SK_U16	PhyId1;			/* PHY Id1 on this port */
+	SK_U16	PhyAddr;		/* MDIO/MDC PHY address */
+	SK_U16	PIsave;			/* Saved Interrupt status word */
+	SK_U16	PSsave;			/* Saved PHY status word */
+	SK_U16	PGmANegAdv;		/* Saved GPhy AutoNegAdvertisment register */
+	SK_BOOL	PHWLinkUp;		/* The hardware Link is up (wiring) */
+	SK_BOOL	PLinkBroken;	/* Is Link broken ? */
+	SK_BOOL	PCheckPar;		/* Do we check for parity errors ? */
+	SK_BOOL	HalfDupTimerActive;
+	SK_U8	PLinkCap;		/* Link Capabilities */
+	SK_U8	PLinkModeConf;	/* Link Mode configured */
+	SK_U8	PLinkMode;		/* Link Mode currently used */
+	SK_U8	PLinkModeStatus;/* Link Mode Status */
+	SK_U8	PLinkSpeedCap;	/* Link Speed Capabilities(10/100/1000 Mbps) */
+	SK_U8	PLinkSpeed;		/* configured Link Speed (10/100/1000 Mbps) */
+	SK_U8	PLinkSpeedUsed;	/* current Link Speed (10/100/1000 Mbps) */
+	SK_U8	PFlowCtrlCap;	/* Flow Control Capabilities */
+	SK_U8	PFlowCtrlMode;	/* Flow Control Mode */
+	SK_U8	PFlowCtrlStatus;/* Flow Control Status */
+	SK_U8	PMSCap;			/* Master/Slave Capabilities */
+	SK_U8	PMSMode;		/* Master/Slave Mode */
+	SK_U8	PMSStatus;		/* Master/Slave Status */
+	SK_BOOL	PAutoNegFail;	/* Auto-negotiation fail flag */
+	SK_U8	PLipaAutoNeg;	/* Auto-negotiation possible with Link Partner */
+	SK_U8	PCableLen;		/* Cable Length */
+	SK_U8	PMdiPairLen[4];	/* MDI[0..3] Pair Length */
+	SK_U8	PMdiPairSts[4];	/* MDI[0..3] Pair Diagnostic Status */
+	SK_U8	PPhyPowerState;	/* PHY current power state */
+	int		PMacColThres;	/* MAC Collision Threshold */
+	int		PMacJamLen;		/* MAC Jam length */
+	int		PMacJamIpgVal;	/* MAC Jam IPG */
+	int		PMacJamIpgData;	/* MAC IPG Jam to Data */
+	int		PMacIpgData;	/* MAC Data IPG */
+	SK_BOOL PMacLimit4;		/* reset collision counter and backoff algorithm */
+} SK_GEPORT;
+
+/*
+ * Gigabit Ethernet Initialization Struct
+ * (has to be included in the adapter context)
+ */
+typedef	struct s_GeInit {
+	int			GIChipId;		/* Chip Identification Number */
+	int			GIChipRev;		/* Chip Revision Number */
+	SK_U8		GIPciHwRev;		/* PCI HW Revision Number */
+	SK_BOOL		GIGenesis;		/* Genesis adapter ? */
+	SK_BOOL		GIYukon;		/* YUKON-A1/Bx chip */
+	SK_BOOL		GIYukonLite;	/* YUKON-Lite chip */
+	SK_BOOL		GICopperType;	/* Copper Type adapter ? */
+	SK_BOOL		GIPciSlot64;	/* 64-bit PCI Slot */
+	SK_BOOL		GIPciClock66;	/* 66 MHz PCI Clock */
+	SK_BOOL		GIVauxAvail;	/* VAUX available (YUKON) */
+	SK_BOOL		GIYukon32Bit;	/* 32-Bit YUKON adapter */
+	SK_U16		GILedBlinkCtrl;	/* LED Blink Control */
+	int			GIMacsFound;	/* Number of MACs found on this adapter */
+	int			GIMacType;		/* MAC Type used on this adapter */
+	int			GIHstClkFact;	/* Host Clock Factor (62.5 / HstClk * 100) */
+	int			GIPortUsage;	/* Driver Port Usage */
+	int			GILevel;		/* Initialization Level completed */
+	int			GIRamSize;		/* The RAM size of the adapter in kB */
+	int			GIWolOffs;		/* WOL Register Offset (HW-Bug in Rev. A) */
+	SK_U32		GIRamOffs;		/* RAM Address Offset for addr calculation */
+	SK_U32		GIPollTimerVal;	/* Descr. Poll Timer Init Val (HstClk ticks) */
+	SK_U32		GIValIrqMask;	/* Value for Interrupt Mask */
+	SK_U32		GITimeStampCnt;	/* Time Stamp High Counter (YUKON only) */
+	SK_GEPORT	GP[SK_MAX_MACS];/* Port Dependent Information */
+	SK_GEMACFUNC GIFunc;		/* MAC depedent functions */
+} SK_GEINIT;
+
+/*
+ * Error numbers and messages for skxmac2.c and skgeinit.c
+ */
+#define SKERR_HWI_E001		(SK_ERRBASE_HWINIT)
+#define SKERR_HWI_E001MSG	"SkXmClrExactAddr() has got illegal parameters"
+#define SKERR_HWI_E002		(SKERR_HWI_E001+1)
+#define SKERR_HWI_E002MSG	"SkGeInit(): Level 1 call missing"
+#define SKERR_HWI_E003		(SKERR_HWI_E002+1)
+#define SKERR_HWI_E003MSG	"SkGeInit() called with illegal init Level"
+#define SKERR_HWI_E004		(SKERR_HWI_E003+1)
+#define SKERR_HWI_E004MSG	"SkGeInitPort(): Queue Size illegal configured"
+#define SKERR_HWI_E005		(SKERR_HWI_E004+1)
+#define SKERR_HWI_E005MSG	"SkGeInitPort(): cannot init running ports"
+#define SKERR_HWI_E006		(SKERR_HWI_E005+1)
+#define SKERR_HWI_E006MSG	"SkGeMacInit(): PState does not match HW state"
+#define SKERR_HWI_E007		(SKERR_HWI_E006+1)
+#define SKERR_HWI_E007MSG	"SkXmInitDupMd() called with invalid Dup Mode"
+#define SKERR_HWI_E008		(SKERR_HWI_E007+1)
+#define SKERR_HWI_E008MSG	"SkXmSetRxCmd() called with invalid Mode"
+#define SKERR_HWI_E009		(SKERR_HWI_E008+1)
+#define SKERR_HWI_E009MSG	"SkGeCfgSync() called although PXSQSize zero"
+#define SKERR_HWI_E010		(SKERR_HWI_E009+1)
+#define SKERR_HWI_E010MSG	"SkGeCfgSync() called with invalid parameters"
+#define SKERR_HWI_E011		(SKERR_HWI_E010+1)
+#define SKERR_HWI_E011MSG	"SkGeInitPort(): Receive Queue Size too small"
+#define SKERR_HWI_E012		(SKERR_HWI_E011+1)
+#define SKERR_HWI_E012MSG	"SkGeInitPort(): invalid Queue Size specified"
+#define SKERR_HWI_E013		(SKERR_HWI_E012+1)
+#define SKERR_HWI_E013MSG	"SkGeInitPort(): cfg changed for running queue"
+#define SKERR_HWI_E014		(SKERR_HWI_E013+1)
+#define SKERR_HWI_E014MSG	"SkGeInitPort(): unknown GIPortUsage specified"
+#define SKERR_HWI_E015		(SKERR_HWI_E014+1)
+#define SKERR_HWI_E015MSG	"Illegal Link mode parameter"
+#define SKERR_HWI_E016		(SKERR_HWI_E015+1)
+#define SKERR_HWI_E016MSG	"Illegal Flow control mode parameter"
+#define SKERR_HWI_E017		(SKERR_HWI_E016+1)
+#define SKERR_HWI_E017MSG	"Illegal value specified for GIPollTimerVal"
+#define SKERR_HWI_E018		(SKERR_HWI_E017+1)
+#define SKERR_HWI_E018MSG	"FATAL: SkGeStopPort() does not terminate (Tx)"
+#define SKERR_HWI_E019		(SKERR_HWI_E018+1)
+#define SKERR_HWI_E019MSG	"Illegal Speed parameter"
+#define SKERR_HWI_E020		(SKERR_HWI_E019+1)
+#define SKERR_HWI_E020MSG	"Illegal Master/Slave parameter"
+#define SKERR_HWI_E021		(SKERR_HWI_E020+1)
+#define	SKERR_HWI_E021MSG	"MacUpdateStats(): cannot update statistic counter"
+#define	SKERR_HWI_E022		(SKERR_HWI_E021+1)
+#define	SKERR_HWI_E022MSG	"MacStatistic(): illegal statistic base address"
+#define SKERR_HWI_E023		(SKERR_HWI_E022+1)
+#define SKERR_HWI_E023MSG	"SkGeInitPort(): Transmit Queue Size too small"
+#define SKERR_HWI_E024		(SKERR_HWI_E023+1)
+#define SKERR_HWI_E024MSG	"FATAL: SkGeStopPort() does not terminate (Rx)"
+#define SKERR_HWI_E025		(SKERR_HWI_E024+1)
+#define SKERR_HWI_E025MSG	""
+
+/* function prototypes ********************************************************/
+
+#ifndef	SK_KR_PROTO
+
+/*
+ * public functions in skgeinit.c
+ */
+extern void	SkGePollTxD(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	int		Port,
+	SK_BOOL PollTxD);
+
+extern void	SkGeYellowLED(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	int		State);
+
+extern int	SkGeCfgSync(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	int		Port,
+	SK_U32	IntTime,
+	SK_U32	LimCount,
+	int		SyncMode);
+
+extern void	SkGeLoadLnkSyncCnt(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	int		Port,
+	SK_U32	CntVal);
+
+extern void	SkGeStopPort(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	int		Port,
+	int		Dir,
+	int		RstMode);
+
+extern int	SkGeInit(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	int		Level);
+
+extern void	SkGeDeInit(
+	SK_AC	*pAC,
+	SK_IOC	IoC);
+
+extern int	SkGeInitPort(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	int		Port);
+
+extern void	SkGeXmitLED(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	int		Led,
+	int		Mode);
+
+extern int	SkGeInitAssignRamToQueues(
+	SK_AC	*pAC,
+	int		ActivePort,
+	SK_BOOL	DualNet);
+
+/*
+ * public functions in skxmac2.c
+ */
+extern void SkMacRxTxDisable(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	int		Port);
+
+extern void	SkMacSoftRst(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	int		Port);
+
+extern void	SkMacHardRst(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	int		Port);
+
+extern void	SkXmInitMac(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	int		Port);
+
+extern void	SkGmInitMac(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	int		Port);
+
+extern void SkMacInitPhy(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	int		Port,
+	SK_BOOL	DoLoop);
+
+extern void SkMacIrqDisable(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	int		Port);
+
+extern void	SkMacFlushTxFifo(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	int		Port);
+
+extern void	SkMacIrq(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	int		Port);
+
+extern int	SkMacAutoNegDone(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	int		Port);
+
+extern void	SkMacAutoNegLipaPhy(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	int		Port,
+	SK_U16	IStatus);
+
+extern int  SkMacRxTxEnable(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	int		Port);
+
+extern void	SkMacPromiscMode(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	int		Port,
+	SK_BOOL	Enable);
+
+extern void	SkMacHashing(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	int		Port,
+	SK_BOOL	Enable);
+
+extern void	SkXmPhyRead(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	int		Port,
+	int		Addr,
+	SK_U16	SK_FAR *pVal);
+
+extern void	SkXmPhyWrite(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	int		Port,
+	int		Addr,
+	SK_U16	Val);
+
+extern void	SkGmPhyRead(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	int		Port,
+	int		Addr,
+	SK_U16	SK_FAR *pVal);
+
+extern void	SkGmPhyWrite(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	int		Port,
+	int		Addr,
+	SK_U16	Val);
+
+extern void	SkXmClrExactAddr(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	int		Port,
+	int		StartNum,
+	int		StopNum);
+
+extern void	SkXmAutoNegLipaXmac(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	int		Port,
+	SK_U16	IStatus);
+
+extern int SkXmUpdateStats(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	unsigned int Port);
+
+extern int SkGmUpdateStats(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	unsigned int Port);
+
+extern int SkXmMacStatistic(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	unsigned int Port,
+	SK_U16	StatAddr,
+	SK_U32	SK_FAR *pVal);
+
+extern int SkGmMacStatistic(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	unsigned int Port,
+	SK_U16	StatAddr,
+	SK_U32	SK_FAR *pVal);
+
+extern int SkXmResetCounter(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	unsigned int Port);
+
+extern int SkGmResetCounter(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	unsigned int Port);
+
+extern int SkXmOverflowStatus(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	unsigned int Port,
+	SK_U16  IStatus,
+	SK_U64	SK_FAR *pStatus);
+
+extern int SkGmOverflowStatus(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	unsigned int Port,
+	SK_U16	MacStatus,
+	SK_U64	SK_FAR *pStatus);
+
+extern int SkGmCableDiagStatus(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	int		Port,
+	SK_BOOL	StartTest);
+
+#ifdef SK_DIAG
+extern void	SkGePhyRead(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	int		Port,
+	int		Addr,
+	SK_U16	*pVal);
+
+extern void	SkGePhyWrite(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	int		Port,
+	int		Addr,
+	SK_U16	Val);
+
+extern void	SkMacSetRxCmd(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	int		Port,
+	int		Mode);
+extern void	SkMacCrcGener(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	int		Port,
+	SK_BOOL	Enable);
+extern void	SkMacTimeStamp(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	int		Port,
+	SK_BOOL	Enable);
+extern void	SkXmSendCont(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	int		Port,
+	SK_BOOL	Enable);
+#endif /* SK_DIAG */
+
+#else	/* SK_KR_PROTO */
+
+/*
+ * public functions in skgeinit.c
+ */
+extern void	SkGePollTxD();
+extern void	SkGeYellowLED();
+extern int	SkGeCfgSync();
+extern void	SkGeLoadLnkSyncCnt();
+extern void	SkGeStopPort();
+extern int	SkGeInit();
+extern void	SkGeDeInit();
+extern int	SkGeInitPort();
+extern void	SkGeXmitLED();
+extern int	SkGeInitAssignRamToQueues();
+
+/*
+ * public functions in skxmac2.c
+ */
+extern void SkMacRxTxDisable();
+extern void	SkMacSoftRst();
+extern void	SkMacHardRst();
+extern void SkMacInitPhy();
+extern int  SkMacRxTxEnable();
+extern void SkMacPromiscMode();
+extern void SkMacHashing();
+extern void SkMacIrqDisable();
+extern void	SkMacFlushTxFifo();
+extern void	SkMacIrq();
+extern int	SkMacAutoNegDone();
+extern void	SkMacAutoNegLipaPhy();
+extern void	SkXmInitMac();
+extern void	SkXmPhyRead();
+extern void	SkXmPhyWrite();
+extern void	SkGmInitMac();
+extern void	SkGmPhyRead();
+extern void	SkGmPhyWrite();
+extern void	SkXmClrExactAddr();
+extern void	SkXmAutoNegLipaXmac();
+extern int	SkXmUpdateStats();
+extern int	SkGmUpdateStats();
+extern int	SkXmMacStatistic();
+extern int	SkGmMacStatistic();
+extern int	SkXmResetCounter();
+extern int	SkGmResetCounter();
+extern int	SkXmOverflowStatus();
+extern int	SkGmOverflowStatus();
+extern int	SkGmCableDiagStatus();
+
+#ifdef SK_DIAG
+extern void	SkGePhyRead();
+extern void	SkGePhyWrite();
+extern void	SkMacSetRxCmd();
+extern void	SkMacCrcGener();
+extern void	SkMacTimeStamp();
+extern void	SkXmSendCont();
+#endif /* SK_DIAG */
+
+#endif	/* SK_KR_PROTO */
+
+#ifdef __cplusplus
+}
+#endif	/* __cplusplus */
+
+#endif	/* __INC_SKGEINIT_H_ */
diff --git a/drivers/net/sk98lin/h/skgepnm2.h b/drivers/net/sk98lin/h/skgepnm2.h
new file mode 100644
index 0000000..ddd304f
--- /dev/null
+++ b/drivers/net/sk98lin/h/skgepnm2.h
@@ -0,0 +1,334 @@
+/*****************************************************************************
+ *
+ * Name:	skgepnm2.h
+ * Project:	GEnesis, PCI Gigabit Ethernet Adapter
+ * Version:	$Revision: 1.36 $
+ * Date:	$Date: 2003/05/23 12:45:13 $
+ * Purpose:	Defines for Private Network Management Interface
+ *
+ ****************************************************************************/
+
+/******************************************************************************
+ *
+ *	(C)Copyright 1998-2002 SysKonnect GmbH.
+ *	(C)Copyright 2002-2003 Marvell.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+#ifndef _SKGEPNM2_H_
+#define _SKGEPNM2_H_
+
+/*
+ * General definitions
+ */
+#define SK_PNMI_CHIPSET_XMAC	1	/* XMAC11800FP */
+#define SK_PNMI_CHIPSET_YUKON	2	/* YUKON */
+
+#define	SK_PNMI_BUS_PCI		1	/* PCI bus*/
+
+/*
+ * Actions
+ */
+#define SK_PNMI_ACT_IDLE		1
+#define SK_PNMI_ACT_RESET		2
+#define SK_PNMI_ACT_SELFTEST	3
+#define SK_PNMI_ACT_RESETCNT	4
+
+/*
+ * VPD releated defines
+ */
+
+#define SK_PNMI_VPD_RW		1
+#define SK_PNMI_VPD_RO		2
+
+#define SK_PNMI_VPD_OK			0
+#define SK_PNMI_VPD_NOTFOUND	1
+#define SK_PNMI_VPD_CUT			2
+#define SK_PNMI_VPD_TIMEOUT		3
+#define SK_PNMI_VPD_FULL		4
+#define SK_PNMI_VPD_NOWRITE		5
+#define SK_PNMI_VPD_FATAL		6
+
+#define SK_PNMI_VPD_IGNORE	0
+#define SK_PNMI_VPD_CREATE	1
+#define SK_PNMI_VPD_DELETE	2
+
+
+/*
+ * RLMT related defines
+ */
+#define SK_PNMI_DEF_RLMT_CHG_THRES	240	/* 4 changes per minute */
+
+
+/*
+ * VCT internal status values
+ */
+#define SK_PNMI_VCT_PENDING	32
+#define SK_PNMI_VCT_TEST_DONE	64
+#define SK_PNMI_VCT_LINK	128
+
+/*
+ * Internal table definitions
+ */
+#define SK_PNMI_GET		0
+#define SK_PNMI_PRESET	1
+#define SK_PNMI_SET		2
+
+#define SK_PNMI_RO		0
+#define SK_PNMI_RW		1
+#define SK_PNMI_WO		2
+
+typedef struct s_OidTabEntry {
+	SK_U32			Id;
+	SK_U32			InstanceNo;
+	unsigned int	StructSize;
+	unsigned int	Offset;
+	int				Access;
+	int				(* Func)(SK_AC *pAc, SK_IOC pIo, int action,
+							 SK_U32 Id, char* pBuf, unsigned int* pLen,
+							 SK_U32 Instance, unsigned int TableIndex,
+							 SK_U32 NetNumber);
+	SK_U16			Param;
+} SK_PNMI_TAB_ENTRY;
+
+
+/*
+ * Trap lengths
+ */
+#define SK_PNMI_TRAP_SIMPLE_LEN			17
+#define SK_PNMI_TRAP_SENSOR_LEN_BASE	46
+#define SK_PNMI_TRAP_RLMT_CHANGE_LEN	23
+#define SK_PNMI_TRAP_RLMT_PORT_LEN		23
+
+/*
+ * Number of MAC types supported
+ */
+#define SK_PNMI_MAC_TYPES	(SK_MAC_GMAC + 1)
+
+/*
+ * MAC statistic data list (overall set for MAC types used)
+ */
+enum SK_MACSTATS {
+	SK_PNMI_HTX				= 0,
+	SK_PNMI_HTX_OCTET,
+	SK_PNMI_HTX_OCTETHIGH 	= SK_PNMI_HTX_OCTET,
+	SK_PNMI_HTX_OCTETLOW,
+	SK_PNMI_HTX_BROADCAST,
+	SK_PNMI_HTX_MULTICAST,
+	SK_PNMI_HTX_UNICAST,
+	SK_PNMI_HTX_BURST,
+	SK_PNMI_HTX_PMACC,
+	SK_PNMI_HTX_MACC,
+	SK_PNMI_HTX_COL,
+	SK_PNMI_HTX_SINGLE_COL,
+	SK_PNMI_HTX_MULTI_COL,
+	SK_PNMI_HTX_EXCESS_COL,
+	SK_PNMI_HTX_LATE_COL,
+	SK_PNMI_HTX_DEFFERAL,
+	SK_PNMI_HTX_EXCESS_DEF,
+	SK_PNMI_HTX_UNDERRUN,
+	SK_PNMI_HTX_CARRIER,
+	SK_PNMI_HTX_UTILUNDER,
+	SK_PNMI_HTX_UTILOVER,
+	SK_PNMI_HTX_64,
+	SK_PNMI_HTX_127,
+	SK_PNMI_HTX_255,
+	SK_PNMI_HTX_511,
+	SK_PNMI_HTX_1023,
+	SK_PNMI_HTX_MAX,
+	SK_PNMI_HTX_LONGFRAMES,
+	SK_PNMI_HTX_SYNC,
+	SK_PNMI_HTX_SYNC_OCTET,
+	SK_PNMI_HTX_RESERVED,
+	
+	SK_PNMI_HRX,
+	SK_PNMI_HRX_OCTET,
+	SK_PNMI_HRX_OCTETHIGH	= SK_PNMI_HRX_OCTET,
+	SK_PNMI_HRX_OCTETLOW,
+	SK_PNMI_HRX_BADOCTET,
+	SK_PNMI_HRX_BADOCTETHIGH = SK_PNMI_HRX_BADOCTET,
+	SK_PNMI_HRX_BADOCTETLOW,
+	SK_PNMI_HRX_BROADCAST,
+	SK_PNMI_HRX_MULTICAST,
+	SK_PNMI_HRX_UNICAST,
+	SK_PNMI_HRX_PMACC,
+	SK_PNMI_HRX_MACC,
+	SK_PNMI_HRX_PMACC_ERR,
+	SK_PNMI_HRX_MACC_UNKWN,
+	SK_PNMI_HRX_BURST,
+	SK_PNMI_HRX_MISSED,
+	SK_PNMI_HRX_FRAMING,
+	SK_PNMI_HRX_UNDERSIZE,
+	SK_PNMI_HRX_OVERFLOW,
+	SK_PNMI_HRX_JABBER,
+	SK_PNMI_HRX_CARRIER,
+	SK_PNMI_HRX_IRLENGTH,
+	SK_PNMI_HRX_SYMBOL,
+	SK_PNMI_HRX_SHORTS,
+	SK_PNMI_HRX_RUNT,
+	SK_PNMI_HRX_TOO_LONG,
+	SK_PNMI_HRX_FCS,
+	SK_PNMI_HRX_CEXT,
+	SK_PNMI_HRX_UTILUNDER,
+	SK_PNMI_HRX_UTILOVER,
+	SK_PNMI_HRX_64,
+	SK_PNMI_HRX_127,
+	SK_PNMI_HRX_255,
+	SK_PNMI_HRX_511,
+	SK_PNMI_HRX_1023,
+	SK_PNMI_HRX_MAX,
+	SK_PNMI_HRX_LONGFRAMES,
+	
+	SK_PNMI_HRX_RESERVED,
+	
+	SK_PNMI_MAX_IDX		/* NOTE: Ensure SK_PNMI_CNT_NO is set to this value */
+};
+
+/*
+ * MAC specific data
+ */
+typedef struct s_PnmiStatAddr {
+	SK_U16		Reg;		/* MAC register containing the value */
+	SK_BOOL		GetOffset;	/* TRUE: Offset managed by PNMI (call GetStatVal())*/
+} SK_PNMI_STATADDR;
+
+
+/*
+ * SK_PNMI_STRUCT_DATA copy offset evaluation macros
+ */
+#define SK_PNMI_OFF(e)		((SK_U32)(SK_UPTR)&(((SK_PNMI_STRUCT_DATA *)0)->e))
+#define SK_PNMI_MAI_OFF(e)	((SK_U32)(SK_UPTR)&(((SK_PNMI_STRUCT_DATA *)0)->e))
+#define SK_PNMI_VPD_OFF(e)	((SK_U32)(SK_UPTR)&(((SK_PNMI_VPD *)0)->e))
+#define SK_PNMI_SEN_OFF(e)	((SK_U32)(SK_UPTR)&(((SK_PNMI_SENSOR *)0)->e))
+#define SK_PNMI_CHK_OFF(e)	((SK_U32)(SK_UPTR)&(((SK_PNMI_CHECKSUM *)0)->e))
+#define SK_PNMI_STA_OFF(e)	((SK_U32)(SK_UPTR)&(((SK_PNMI_STAT *)0)->e))
+#define SK_PNMI_CNF_OFF(e)	((SK_U32)(SK_UPTR)&(((SK_PNMI_CONF *)0)->e))
+#define SK_PNMI_RLM_OFF(e)	((SK_U32)(SK_UPTR)&(((SK_PNMI_RLMT *)0)->e))
+#define SK_PNMI_MON_OFF(e)	((SK_U32)(SK_UPTR)&(((SK_PNMI_RLMT_MONITOR *)0)->e))
+#define SK_PNMI_TRP_OFF(e)	((SK_U32)(SK_UPTR)&(((SK_PNMI_TRAP *)0)->e))
+
+#define SK_PNMI_SET_STAT(b,s,o)	{SK_U32	Val32; char *pVal; \
+					Val32 = (s); \
+					pVal = (char *)(b) + ((SK_U32)(SK_UPTR) \
+						&(((SK_PNMI_STRUCT_DATA *)0)-> \
+						ReturnStatus.ErrorStatus)); \
+					SK_PNMI_STORE_U32(pVal, Val32); \
+					Val32 = (o); \
+					pVal = (char *)(b) + ((SK_U32)(SK_UPTR) \
+						&(((SK_PNMI_STRUCT_DATA *)0)-> \
+						ReturnStatus.ErrorOffset)); \
+					SK_PNMI_STORE_U32(pVal, Val32);}
+
+/*
+ * Time macros
+ */
+#ifndef SK_PNMI_HUNDREDS_SEC
+#if SK_TICKS_PER_SEC == 100
+#define SK_PNMI_HUNDREDS_SEC(t)	(t)
+#else
+#define SK_PNMI_HUNDREDS_SEC(t)	(((t) * 100) / (SK_TICKS_PER_SEC))
+#endif /* !SK_TICKS_PER_SEC */
+#endif /* !SK_PNMI_HUNDREDS_SEC */
+
+/*
+ * Macros to work around alignment problems
+ */
+#ifndef SK_PNMI_STORE_U16
+#define SK_PNMI_STORE_U16(p,v)	{*(char *)(p) = *((char *)&(v)); \
+					*((char *)(p) + 1) = \
+						*(((char *)&(v)) + 1);}
+#endif
+
+#ifndef SK_PNMI_STORE_U32
+#define SK_PNMI_STORE_U32(p,v)	{*(char *)(p) = *((char *)&(v)); \
+					*((char *)(p) + 1) = \
+						*(((char *)&(v)) + 1); \
+					*((char *)(p) + 2) = \
+						*(((char *)&(v)) + 2); \
+					*((char *)(p) + 3) = \
+						*(((char *)&(v)) + 3);}
+#endif
+
+#ifndef SK_PNMI_STORE_U64
+#define SK_PNMI_STORE_U64(p,v)	{*(char *)(p) = *((char *)&(v)); \
+					*((char *)(p) + 1) = \
+						*(((char *)&(v)) + 1); \
+					*((char *)(p) + 2) = \
+						*(((char *)&(v)) + 2); \
+					*((char *)(p) + 3) = \
+						*(((char *)&(v)) + 3); \
+					*((char *)(p) + 4) = \
+						*(((char *)&(v)) + 4); \
+					*((char *)(p) + 5) = \
+						*(((char *)&(v)) + 5); \
+					*((char *)(p) + 6) = \
+						*(((char *)&(v)) + 6); \
+					*((char *)(p) + 7) = \
+						*(((char *)&(v)) + 7);}
+#endif
+
+#ifndef SK_PNMI_READ_U16
+#define SK_PNMI_READ_U16(p,v)	{*((char *)&(v)) = *(char *)(p); \
+					*(((char *)&(v)) + 1) = \
+						*((char *)(p) + 1);}
+#endif
+
+#ifndef SK_PNMI_READ_U32
+#define SK_PNMI_READ_U32(p,v)	{*((char *)&(v)) = *(char *)(p); \
+					*(((char *)&(v)) + 1) = \
+						*((char *)(p) + 1); \
+					*(((char *)&(v)) + 2) = \
+						*((char *)(p) + 2); \
+					*(((char *)&(v)) + 3) = \
+						*((char *)(p) + 3);}
+#endif
+
+#ifndef SK_PNMI_READ_U64
+#define SK_PNMI_READ_U64(p,v)	{*((char *)&(v)) = *(char *)(p); \
+					*(((char *)&(v)) + 1) = \
+						*((char *)(p) + 1); \
+					*(((char *)&(v)) + 2) = \
+						*((char *)(p) + 2); \
+					*(((char *)&(v)) + 3) = \
+						*((char *)(p) + 3); \
+					*(((char *)&(v)) + 4) = \
+						*((char *)(p) + 4); \
+					*(((char *)&(v)) + 5) = \
+						*((char *)(p) + 5); \
+					*(((char *)&(v)) + 6) = \
+						*((char *)(p) + 6); \
+					*(((char *)&(v)) + 7) = \
+						*((char *)(p) + 7);}
+#endif
+
+/*
+ * Macros for Debug
+ */
+#ifdef DEBUG
+
+#define SK_PNMI_CHECKFLAGS(vSt)	{if (pAC->Pnmi.MacUpdatedFlag > 0 || \
+					pAC->Pnmi.RlmtUpdatedFlag > 0 || \
+					pAC->Pnmi.SirqUpdatedFlag > 0) { \
+						SK_DBG_MSG(pAC, \
+						SK_DBGMOD_PNMI, \
+						SK_DBGCAT_CTRL,	\
+						("PNMI: ERR: %s MacUFlag=%d, RlmtUFlag=%d, SirqUFlag=%d\n", \
+						vSt, \
+						pAC->Pnmi.MacUpdatedFlag, \
+						pAC->Pnmi.RlmtUpdatedFlag, \
+						pAC->Pnmi.SirqUpdatedFlag))}}
+
+#else	/* !DEBUG */
+
+#define SK_PNMI_CHECKFLAGS(vSt)	/* Nothing */
+
+#endif	/* !DEBUG */
+
+#endif	/* _SKGEPNM2_H_ */
diff --git a/drivers/net/sk98lin/h/skgepnmi.h b/drivers/net/sk98lin/h/skgepnmi.h
new file mode 100644
index 0000000..1ed214c
--- /dev/null
+++ b/drivers/net/sk98lin/h/skgepnmi.h
@@ -0,0 +1,962 @@
+/*****************************************************************************
+ *
+ * Name:	skgepnmi.h
+ * Project:	GEnesis, PCI Gigabit Ethernet Adapter
+ * Version:	$Revision: 1.62 $
+ * Date:	$Date: 2003/08/15 12:31:52 $
+ * Purpose:	Defines for Private Network Management Interface
+ *
+ ****************************************************************************/
+
+/******************************************************************************
+ *
+ *	(C)Copyright 1998-2002 SysKonnect GmbH.
+ *	(C)Copyright 2002-2003 Marvell.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+#ifndef _SKGEPNMI_H_
+#define _SKGEPNMI_H_
+
+/*
+ * Include dependencies
+ */
+#include "h/sktypes.h"
+#include "h/skerror.h"
+#include "h/sktimer.h"
+#include "h/ski2c.h"
+#include "h/skaddr.h"
+#include "h/skrlmt.h"
+#include "h/skvpd.h"
+
+/*
+ * Management Database Version
+ */
+#define SK_PNMI_MDB_VERSION		0x00030001	/* 3.1 */
+
+
+/*
+ * Event definitions
+ */
+#define SK_PNMI_EVT_SIRQ_OVERFLOW		1	/* Counter overflow */
+#define SK_PNMI_EVT_SEN_WAR_LOW			2	/* Lower war thres exceeded */
+#define SK_PNMI_EVT_SEN_WAR_UPP			3	/* Upper war thres exceeded */
+#define SK_PNMI_EVT_SEN_ERR_LOW			4	/* Lower err thres exceeded */
+#define SK_PNMI_EVT_SEN_ERR_UPP			5	/* Upper err thres exceeded */
+#define SK_PNMI_EVT_CHG_EST_TIMER		6	/* Timer event for RLMT Chg */
+#define SK_PNMI_EVT_UTILIZATION_TIMER	7	/* Timer event for Utiliza. */
+#define SK_PNMI_EVT_CLEAR_COUNTER		8	/* Clear statistic counters */
+#define SK_PNMI_EVT_XMAC_RESET			9	/* XMAC will be reset */
+
+#define SK_PNMI_EVT_RLMT_PORT_UP		10	/* Port came logically up */
+#define SK_PNMI_EVT_RLMT_PORT_DOWN		11	/* Port went logically down */
+#define SK_PNMI_EVT_RLMT_SEGMENTATION	13	/* Two SP root bridges found */
+#define SK_PNMI_EVT_RLMT_ACTIVE_DOWN	14	/* Port went logically down */
+#define SK_PNMI_EVT_RLMT_ACTIVE_UP		15	/* Port came logically up */
+#define SK_PNMI_EVT_RLMT_SET_NETS		16	/* 1. Parameter is number of nets
+												1 = single net; 2 = dual net */
+#define SK_PNMI_EVT_VCT_RESET		17	/* VCT port reset timer event started with SET. */
+
+
+/*
+ * Return values
+ */
+#define SK_PNMI_ERR_OK				0
+#define SK_PNMI_ERR_GENERAL			1
+#define SK_PNMI_ERR_TOO_SHORT		2
+#define SK_PNMI_ERR_BAD_VALUE		3
+#define SK_PNMI_ERR_READ_ONLY		4
+#define SK_PNMI_ERR_UNKNOWN_OID		5
+#define SK_PNMI_ERR_UNKNOWN_INST	6
+#define SK_PNMI_ERR_UNKNOWN_NET 	7
+#define SK_PNMI_ERR_NOT_SUPPORTED	10
+
+
+/*
+ * Return values of driver reset function SK_DRIVER_RESET() and
+ * driver event function SK_DRIVER_EVENT()
+ */
+#define SK_PNMI_ERR_OK			0
+#define SK_PNMI_ERR_FAIL		1
+
+
+/*
+ * Return values of driver test function SK_DRIVER_SELFTEST()
+ */
+#define SK_PNMI_TST_UNKNOWN		(1 << 0)
+#define SK_PNMI_TST_TRANCEIVER		(1 << 1)
+#define SK_PNMI_TST_ASIC		(1 << 2)
+#define SK_PNMI_TST_SENSOR		(1 << 3)
+#define SK_PNMI_TST_POWERMGMT		(1 << 4)
+#define SK_PNMI_TST_PCI			(1 << 5)
+#define SK_PNMI_TST_MAC			(1 << 6)
+
+
+/*
+ * RLMT specific definitions
+ */
+#define SK_PNMI_RLMT_STATUS_STANDBY	1
+#define SK_PNMI_RLMT_STATUS_ACTIVE	2
+#define SK_PNMI_RLMT_STATUS_ERROR	3
+
+#define SK_PNMI_RLMT_LSTAT_PHY_DOWN	1
+#define SK_PNMI_RLMT_LSTAT_AUTONEG	2
+#define SK_PNMI_RLMT_LSTAT_LOG_DOWN	3
+#define SK_PNMI_RLMT_LSTAT_LOG_UP	4
+#define SK_PNMI_RLMT_LSTAT_INDETERMINATED 5
+
+#define SK_PNMI_RLMT_MODE_CHK_LINK	(SK_RLMT_CHECK_LINK)
+#define SK_PNMI_RLMT_MODE_CHK_RX	(SK_RLMT_CHECK_LOC_LINK)
+#define SK_PNMI_RLMT_MODE_CHK_SPT	(SK_RLMT_CHECK_SEG)
+/* #define SK_PNMI_RLMT_MODE_CHK_EX */
+
+/*
+ * OID definition
+ */
+#ifndef _NDIS_	/* Check, whether NDIS already included OIDs */
+
+#define OID_GEN_XMIT_OK					0x00020101
+#define OID_GEN_RCV_OK					0x00020102
+#define OID_GEN_XMIT_ERROR				0x00020103
+#define OID_GEN_RCV_ERROR				0x00020104
+#define OID_GEN_RCV_NO_BUFFER			0x00020105
+
+/* #define OID_GEN_DIRECTED_BYTES_XMIT	0x00020201 */
+#define OID_GEN_DIRECTED_FRAMES_XMIT	0x00020202
+/* #define OID_GEN_MULTICAST_BYTES_XMIT	0x00020203 */
+#define OID_GEN_MULTICAST_FRAMES_XMIT	0x00020204
+/* #define OID_GEN_BROADCAST_BYTES_XMIT	0x00020205 */
+#define OID_GEN_BROADCAST_FRAMES_XMIT	0x00020206
+/* #define OID_GEN_DIRECTED_BYTES_RCV	0x00020207 */
+#define OID_GEN_DIRECTED_FRAMES_RCV		0x00020208
+/* #define OID_GEN_MULTICAST_BYTES_RCV	0x00020209 */
+#define OID_GEN_MULTICAST_FRAMES_RCV	0x0002020A
+/* #define OID_GEN_BROADCAST_BYTES_RCV	0x0002020B */
+#define OID_GEN_BROADCAST_FRAMES_RCV	0x0002020C
+#define OID_GEN_RCV_CRC_ERROR			0x0002020D
+#define OID_GEN_TRANSMIT_QUEUE_LENGTH	0x0002020E
+
+#define OID_802_3_PERMANENT_ADDRESS		0x01010101
+#define OID_802_3_CURRENT_ADDRESS		0x01010102
+/* #define OID_802_3_MULTICAST_LIST		0x01010103 */
+/* #define OID_802_3_MAXIMUM_LIST_SIZE	0x01010104 */
+/* #define OID_802_3_MAC_OPTIONS		0x01010105 */
+			
+#define OID_802_3_RCV_ERROR_ALIGNMENT	0x01020101
+#define OID_802_3_XMIT_ONE_COLLISION	0x01020102
+#define OID_802_3_XMIT_MORE_COLLISIONS	0x01020103
+#define OID_802_3_XMIT_DEFERRED			0x01020201
+#define OID_802_3_XMIT_MAX_COLLISIONS	0x01020202
+#define OID_802_3_RCV_OVERRUN			0x01020203
+#define OID_802_3_XMIT_UNDERRUN			0x01020204
+#define OID_802_3_XMIT_TIMES_CRS_LOST	0x01020206
+#define OID_802_3_XMIT_LATE_COLLISIONS	0x01020207
+
+/*
+ * PnP and PM OIDs
+ */
+#ifdef SK_POWER_MGMT
+#define OID_PNP_CAPABILITIES			0xFD010100
+#define OID_PNP_SET_POWER				0xFD010101
+#define OID_PNP_QUERY_POWER				0xFD010102
+#define OID_PNP_ADD_WAKE_UP_PATTERN		0xFD010103
+#define OID_PNP_REMOVE_WAKE_UP_PATTERN	0xFD010104
+#define OID_PNP_ENABLE_WAKE_UP			0xFD010106
+#endif /* SK_POWER_MGMT */
+
+#endif /* _NDIS_ */
+
+#define OID_SKGE_MDB_VERSION			0xFF010100
+#define OID_SKGE_SUPPORTED_LIST			0xFF010101
+#define OID_SKGE_VPD_FREE_BYTES			0xFF010102
+#define OID_SKGE_VPD_ENTRIES_LIST		0xFF010103
+#define OID_SKGE_VPD_ENTRIES_NUMBER		0xFF010104
+#define OID_SKGE_VPD_KEY				0xFF010105
+#define OID_SKGE_VPD_VALUE				0xFF010106
+#define OID_SKGE_VPD_ACCESS				0xFF010107
+#define OID_SKGE_VPD_ACTION				0xFF010108
+			
+#define OID_SKGE_PORT_NUMBER			0xFF010110
+#define OID_SKGE_DEVICE_TYPE			0xFF010111
+#define OID_SKGE_DRIVER_DESCR			0xFF010112
+#define OID_SKGE_DRIVER_VERSION			0xFF010113
+#define OID_SKGE_HW_DESCR				0xFF010114
+#define OID_SKGE_HW_VERSION				0xFF010115
+#define OID_SKGE_CHIPSET				0xFF010116
+#define OID_SKGE_ACTION					0xFF010117
+#define OID_SKGE_RESULT					0xFF010118
+#define OID_SKGE_BUS_TYPE				0xFF010119
+#define OID_SKGE_BUS_SPEED				0xFF01011A
+#define OID_SKGE_BUS_WIDTH				0xFF01011B
+/* 0xFF01011C unused */
+#define OID_SKGE_DIAG_ACTION			0xFF01011D
+#define OID_SKGE_DIAG_RESULT			0xFF01011E
+#define OID_SKGE_MTU					0xFF01011F
+#define OID_SKGE_PHYS_CUR_ADDR			0xFF010120
+#define OID_SKGE_PHYS_FAC_ADDR			0xFF010121
+#define OID_SKGE_PMD					0xFF010122
+#define OID_SKGE_CONNECTOR				0xFF010123
+#define OID_SKGE_LINK_CAP				0xFF010124
+#define OID_SKGE_LINK_MODE				0xFF010125
+#define OID_SKGE_LINK_MODE_STATUS		0xFF010126
+#define OID_SKGE_LINK_STATUS			0xFF010127
+#define OID_SKGE_FLOWCTRL_CAP			0xFF010128
+#define OID_SKGE_FLOWCTRL_MODE			0xFF010129
+#define OID_SKGE_FLOWCTRL_STATUS		0xFF01012A
+#define OID_SKGE_PHY_OPERATION_CAP		0xFF01012B
+#define OID_SKGE_PHY_OPERATION_MODE		0xFF01012C
+#define OID_SKGE_PHY_OPERATION_STATUS	0xFF01012D
+#define OID_SKGE_MULTICAST_LIST			0xFF01012E
+#define OID_SKGE_CURRENT_PACKET_FILTER	0xFF01012F
+
+#define OID_SKGE_TRAP					0xFF010130
+#define OID_SKGE_TRAP_NUMBER			0xFF010131
+
+#define OID_SKGE_RLMT_MODE				0xFF010140
+#define OID_SKGE_RLMT_PORT_NUMBER		0xFF010141
+#define OID_SKGE_RLMT_PORT_ACTIVE		0xFF010142
+#define OID_SKGE_RLMT_PORT_PREFERRED	0xFF010143
+#define OID_SKGE_INTERMEDIATE_SUPPORT	0xFF010160
+
+#define OID_SKGE_SPEED_CAP				0xFF010170
+#define OID_SKGE_SPEED_MODE				0xFF010171
+#define OID_SKGE_SPEED_STATUS			0xFF010172
+
+#define OID_SKGE_BOARDLEVEL				0xFF010180
+
+#define OID_SKGE_SENSOR_NUMBER			0xFF020100			
+#define OID_SKGE_SENSOR_INDEX			0xFF020101
+#define OID_SKGE_SENSOR_DESCR			0xFF020102
+#define OID_SKGE_SENSOR_TYPE			0xFF020103
+#define OID_SKGE_SENSOR_VALUE			0xFF020104
+#define OID_SKGE_SENSOR_WAR_THRES_LOW	0xFF020105
+#define OID_SKGE_SENSOR_WAR_THRES_UPP	0xFF020106
+#define OID_SKGE_SENSOR_ERR_THRES_LOW	0xFF020107
+#define OID_SKGE_SENSOR_ERR_THRES_UPP	0xFF020108
+#define OID_SKGE_SENSOR_STATUS			0xFF020109
+#define OID_SKGE_SENSOR_WAR_CTS			0xFF02010A
+#define OID_SKGE_SENSOR_ERR_CTS			0xFF02010B
+#define OID_SKGE_SENSOR_WAR_TIME		0xFF02010C
+#define OID_SKGE_SENSOR_ERR_TIME		0xFF02010D
+
+#define OID_SKGE_CHKSM_NUMBER			0xFF020110
+#define OID_SKGE_CHKSM_RX_OK_CTS		0xFF020111
+#define OID_SKGE_CHKSM_RX_UNABLE_CTS	0xFF020112
+#define OID_SKGE_CHKSM_RX_ERR_CTS		0xFF020113
+#define OID_SKGE_CHKSM_TX_OK_CTS		0xFF020114
+#define OID_SKGE_CHKSM_TX_UNABLE_CTS	0xFF020115
+
+#define OID_SKGE_STAT_TX				0xFF020120
+#define OID_SKGE_STAT_TX_OCTETS			0xFF020121
+#define OID_SKGE_STAT_TX_BROADCAST		0xFF020122
+#define OID_SKGE_STAT_TX_MULTICAST		0xFF020123
+#define OID_SKGE_STAT_TX_UNICAST		0xFF020124
+#define OID_SKGE_STAT_TX_LONGFRAMES		0xFF020125
+#define OID_SKGE_STAT_TX_BURST			0xFF020126
+#define OID_SKGE_STAT_TX_PFLOWC			0xFF020127
+#define OID_SKGE_STAT_TX_FLOWC			0xFF020128
+#define OID_SKGE_STAT_TX_SINGLE_COL		0xFF020129
+#define OID_SKGE_STAT_TX_MULTI_COL		0xFF02012A
+#define OID_SKGE_STAT_TX_EXCESS_COL		0xFF02012B
+#define OID_SKGE_STAT_TX_LATE_COL		0xFF02012C
+#define OID_SKGE_STAT_TX_DEFFERAL		0xFF02012D
+#define OID_SKGE_STAT_TX_EXCESS_DEF		0xFF02012E
+#define OID_SKGE_STAT_TX_UNDERRUN		0xFF02012F
+#define OID_SKGE_STAT_TX_CARRIER		0xFF020130
+/* #define OID_SKGE_STAT_TX_UTIL		0xFF020131 */
+#define OID_SKGE_STAT_TX_64				0xFF020132
+#define OID_SKGE_STAT_TX_127			0xFF020133
+#define OID_SKGE_STAT_TX_255			0xFF020134
+#define OID_SKGE_STAT_TX_511			0xFF020135
+#define OID_SKGE_STAT_TX_1023			0xFF020136
+#define OID_SKGE_STAT_TX_MAX			0xFF020137
+#define OID_SKGE_STAT_TX_SYNC			0xFF020138
+#define OID_SKGE_STAT_TX_SYNC_OCTETS	0xFF020139
+#define OID_SKGE_STAT_RX				0xFF02013A
+#define OID_SKGE_STAT_RX_OCTETS			0xFF02013B
+#define OID_SKGE_STAT_RX_BROADCAST		0xFF02013C
+#define OID_SKGE_STAT_RX_MULTICAST		0xFF02013D
+#define OID_SKGE_STAT_RX_UNICAST		0xFF02013E
+#define OID_SKGE_STAT_RX_PFLOWC			0xFF02013F
+#define OID_SKGE_STAT_RX_FLOWC			0xFF020140
+#define OID_SKGE_STAT_RX_PFLOWC_ERR		0xFF020141
+#define OID_SKGE_STAT_RX_FLOWC_UNKWN	0xFF020142
+#define OID_SKGE_STAT_RX_BURST			0xFF020143
+#define OID_SKGE_STAT_RX_MISSED			0xFF020144
+#define OID_SKGE_STAT_RX_FRAMING		0xFF020145
+#define OID_SKGE_STAT_RX_OVERFLOW		0xFF020146
+#define OID_SKGE_STAT_RX_JABBER			0xFF020147
+#define OID_SKGE_STAT_RX_CARRIER		0xFF020148
+#define OID_SKGE_STAT_RX_IR_LENGTH		0xFF020149
+#define OID_SKGE_STAT_RX_SYMBOL			0xFF02014A
+#define OID_SKGE_STAT_RX_SHORTS			0xFF02014B
+#define OID_SKGE_STAT_RX_RUNT			0xFF02014C
+#define OID_SKGE_STAT_RX_CEXT			0xFF02014D
+#define OID_SKGE_STAT_RX_TOO_LONG		0xFF02014E
+#define OID_SKGE_STAT_RX_FCS			0xFF02014F
+/* #define OID_SKGE_STAT_RX_UTIL		0xFF020150 */
+#define OID_SKGE_STAT_RX_64				0xFF020151
+#define OID_SKGE_STAT_RX_127			0xFF020152
+#define OID_SKGE_STAT_RX_255			0xFF020153
+#define OID_SKGE_STAT_RX_511			0xFF020154
+#define OID_SKGE_STAT_RX_1023			0xFF020155
+#define OID_SKGE_STAT_RX_MAX			0xFF020156
+#define OID_SKGE_STAT_RX_LONGFRAMES		0xFF020157
+
+#define OID_SKGE_RLMT_CHANGE_CTS		0xFF020160
+#define OID_SKGE_RLMT_CHANGE_TIME		0xFF020161
+#define OID_SKGE_RLMT_CHANGE_ESTIM		0xFF020162
+#define OID_SKGE_RLMT_CHANGE_THRES		0xFF020163
+
+#define OID_SKGE_RLMT_PORT_INDEX		0xFF020164
+#define OID_SKGE_RLMT_STATUS			0xFF020165
+#define OID_SKGE_RLMT_TX_HELLO_CTS		0xFF020166
+#define OID_SKGE_RLMT_RX_HELLO_CTS		0xFF020167
+#define OID_SKGE_RLMT_TX_SP_REQ_CTS		0xFF020168
+#define OID_SKGE_RLMT_RX_SP_CTS			0xFF020169
+
+#define OID_SKGE_RLMT_MONITOR_NUMBER	0xFF010150
+#define OID_SKGE_RLMT_MONITOR_INDEX		0xFF010151
+#define OID_SKGE_RLMT_MONITOR_ADDR		0xFF010152
+#define OID_SKGE_RLMT_MONITOR_ERRS		0xFF010153
+#define OID_SKGE_RLMT_MONITOR_TIMESTAMP	0xFF010154
+#define OID_SKGE_RLMT_MONITOR_ADMIN		0xFF010155
+
+#define OID_SKGE_TX_SW_QUEUE_LEN		0xFF020170
+#define OID_SKGE_TX_SW_QUEUE_MAX		0xFF020171
+#define OID_SKGE_TX_RETRY				0xFF020172
+#define OID_SKGE_RX_INTR_CTS			0xFF020173
+#define OID_SKGE_TX_INTR_CTS			0xFF020174
+#define OID_SKGE_RX_NO_BUF_CTS			0xFF020175
+#define OID_SKGE_TX_NO_BUF_CTS			0xFF020176
+#define OID_SKGE_TX_USED_DESCR_NO		0xFF020177
+#define OID_SKGE_RX_DELIVERED_CTS		0xFF020178
+#define OID_SKGE_RX_OCTETS_DELIV_CTS	0xFF020179
+#define OID_SKGE_RX_HW_ERROR_CTS		0xFF02017A
+#define OID_SKGE_TX_HW_ERROR_CTS		0xFF02017B
+#define OID_SKGE_IN_ERRORS_CTS			0xFF02017C
+#define OID_SKGE_OUT_ERROR_CTS			0xFF02017D
+#define OID_SKGE_ERR_RECOVERY_CTS		0xFF02017E
+#define OID_SKGE_SYSUPTIME				0xFF02017F
+
+#define OID_SKGE_ALL_DATA				0xFF020190
+
+/* Defines for VCT. */
+#define OID_SKGE_VCT_GET				0xFF020200
+#define OID_SKGE_VCT_SET				0xFF020201
+#define OID_SKGE_VCT_STATUS				0xFF020202
+
+#ifdef SK_DIAG_SUPPORT
+/* Defines for driver DIAG mode. */
+#define OID_SKGE_DIAG_MODE				0xFF020204
+#endif /* SK_DIAG_SUPPORT */
+
+/* New OIDs */
+#define OID_SKGE_DRIVER_RELDATE			0xFF020210
+#define OID_SKGE_DRIVER_FILENAME		0xFF020211
+#define OID_SKGE_CHIPID					0xFF020212
+#define OID_SKGE_RAMSIZE				0xFF020213
+#define OID_SKGE_VAUXAVAIL				0xFF020214
+#define OID_SKGE_PHY_TYPE				0xFF020215
+#define OID_SKGE_PHY_LP_MODE			0xFF020216
+
+/* VCT struct to store a backup copy of VCT data after a port reset. */
+typedef struct s_PnmiVct {
+	SK_U8			VctStatus;
+	SK_U8			PCableLen;
+	SK_U32			PMdiPairLen[4];
+	SK_U8			PMdiPairSts[4];
+} SK_PNMI_VCT;
+
+
+/* VCT status values (to be given to CPA via OID_SKGE_VCT_STATUS). */
+#define SK_PNMI_VCT_NONE		0
+#define SK_PNMI_VCT_OLD_VCT_DATA	1
+#define SK_PNMI_VCT_NEW_VCT_DATA	2
+#define SK_PNMI_VCT_OLD_DSP_DATA	4
+#define SK_PNMI_VCT_NEW_DSP_DATA	8
+#define SK_PNMI_VCT_RUNNING		16
+
+
+/* VCT cable test status. */
+#define SK_PNMI_VCT_NORMAL_CABLE		0
+#define SK_PNMI_VCT_SHORT_CABLE			1
+#define SK_PNMI_VCT_OPEN_CABLE			2
+#define SK_PNMI_VCT_TEST_FAIL			3
+#define SK_PNMI_VCT_IMPEDANCE_MISMATCH		4
+
+#define	OID_SKGE_TRAP_SEN_WAR_LOW		500
+#define OID_SKGE_TRAP_SEN_WAR_UPP		501
+#define	OID_SKGE_TRAP_SEN_ERR_LOW		502
+#define OID_SKGE_TRAP_SEN_ERR_UPP		503
+#define OID_SKGE_TRAP_RLMT_CHANGE_THRES	520
+#define OID_SKGE_TRAP_RLMT_CHANGE_PORT	521
+#define OID_SKGE_TRAP_RLMT_PORT_DOWN	522
+#define OID_SKGE_TRAP_RLMT_PORT_UP		523
+#define OID_SKGE_TRAP_RLMT_SEGMENTATION	524
+
+#ifdef SK_DIAG_SUPPORT
+/* Defines for driver DIAG mode. */
+#define SK_DIAG_ATTACHED	2
+#define SK_DIAG_RUNNING		1
+#define SK_DIAG_IDLE		0
+#endif /* SK_DIAG_SUPPORT */
+
+/*
+ * Generic PNMI IOCTL subcommand definitions.
+ */
+#define	SK_GET_SINGLE_VAR		1
+#define	SK_SET_SINGLE_VAR		2
+#define	SK_PRESET_SINGLE_VAR	3
+#define	SK_GET_FULL_MIB			4
+#define	SK_SET_FULL_MIB			5
+#define	SK_PRESET_FULL_MIB		6
+
+
+/*
+ * Define error numbers and messages for syslog
+ */
+#define SK_PNMI_ERR001		(SK_ERRBASE_PNMI + 1)
+#define SK_PNMI_ERR001MSG	"SkPnmiGetStruct: Unknown OID"
+#define SK_PNMI_ERR002		(SK_ERRBASE_PNMI + 2)
+#define SK_PNMI_ERR002MSG	"SkPnmiGetStruct: Cannot read VPD keys"
+#define SK_PNMI_ERR003		(SK_ERRBASE_PNMI + 3)
+#define SK_PNMI_ERR003MSG	"OidStruct: Called with wrong OID"
+#define SK_PNMI_ERR004		(SK_ERRBASE_PNMI + 4)
+#define SK_PNMI_ERR004MSG	"OidStruct: Called with wrong action"
+#define SK_PNMI_ERR005		(SK_ERRBASE_PNMI + 5)
+#define SK_PNMI_ERR005MSG	"Perform: Cannot reset driver"
+#define SK_PNMI_ERR006		(SK_ERRBASE_PNMI + 6)
+#define SK_PNMI_ERR006MSG	"Perform: Unknown OID action command"
+#define SK_PNMI_ERR007		(SK_ERRBASE_PNMI + 7)
+#define SK_PNMI_ERR007MSG	"General: Driver description not initialized"
+#define SK_PNMI_ERR008		(SK_ERRBASE_PNMI + 8)
+#define SK_PNMI_ERR008MSG	"Addr: Tried to get unknown OID"
+#define SK_PNMI_ERR009		(SK_ERRBASE_PNMI + 9)
+#define SK_PNMI_ERR009MSG	"Addr: Unknown OID"
+#define SK_PNMI_ERR010		(SK_ERRBASE_PNMI + 10)
+#define SK_PNMI_ERR010MSG	"CsumStat: Unknown OID"
+#define SK_PNMI_ERR011		(SK_ERRBASE_PNMI + 11)
+#define SK_PNMI_ERR011MSG	"SensorStat: Sensor descr string too long"
+#define SK_PNMI_ERR012		(SK_ERRBASE_PNMI + 12)
+#define SK_PNMI_ERR012MSG	"SensorStat: Unknown OID"
+#define SK_PNMI_ERR013		(SK_ERRBASE_PNMI + 13)
+#define SK_PNMI_ERR013MSG	""
+#define SK_PNMI_ERR014		(SK_ERRBASE_PNMI + 14)
+#define SK_PNMI_ERR014MSG	"Vpd: Cannot read VPD keys"
+#define SK_PNMI_ERR015		(SK_ERRBASE_PNMI + 15)
+#define SK_PNMI_ERR015MSG	"Vpd: Internal array for VPD keys to small"
+#define SK_PNMI_ERR016		(SK_ERRBASE_PNMI + 16)
+#define SK_PNMI_ERR016MSG	"Vpd: Key string too long"
+#define SK_PNMI_ERR017		(SK_ERRBASE_PNMI + 17)
+#define SK_PNMI_ERR017MSG	"Vpd: Invalid VPD status pointer"
+#define SK_PNMI_ERR018		(SK_ERRBASE_PNMI + 18)
+#define SK_PNMI_ERR018MSG	"Vpd: VPD data not valid"
+#define SK_PNMI_ERR019		(SK_ERRBASE_PNMI + 19)
+#define SK_PNMI_ERR019MSG	"Vpd: VPD entries list string too long"
+#define SK_PNMI_ERR021		(SK_ERRBASE_PNMI + 21)
+#define SK_PNMI_ERR021MSG	"Vpd: VPD data string too long"
+#define SK_PNMI_ERR022		(SK_ERRBASE_PNMI + 22)
+#define SK_PNMI_ERR022MSG	"Vpd: VPD data string too long should be errored before"
+#define SK_PNMI_ERR023		(SK_ERRBASE_PNMI + 23)
+#define SK_PNMI_ERR023MSG	"Vpd: Unknown OID in get action"
+#define SK_PNMI_ERR024		(SK_ERRBASE_PNMI + 24)
+#define SK_PNMI_ERR024MSG	"Vpd: Unknown OID in preset/set action"
+#define SK_PNMI_ERR025		(SK_ERRBASE_PNMI + 25)
+#define SK_PNMI_ERR025MSG	"Vpd: Cannot write VPD after modify entry"
+#define SK_PNMI_ERR026		(SK_ERRBASE_PNMI + 26)
+#define SK_PNMI_ERR026MSG	"Vpd: Cannot update VPD"
+#define SK_PNMI_ERR027		(SK_ERRBASE_PNMI + 27)
+#define SK_PNMI_ERR027MSG	"Vpd: Cannot delete VPD entry"
+#define SK_PNMI_ERR028		(SK_ERRBASE_PNMI + 28)
+#define SK_PNMI_ERR028MSG	"Vpd: Cannot update VPD after delete entry"
+#define SK_PNMI_ERR029		(SK_ERRBASE_PNMI + 29)
+#define SK_PNMI_ERR029MSG	"General: Driver description string too long"
+#define SK_PNMI_ERR030		(SK_ERRBASE_PNMI + 30)
+#define SK_PNMI_ERR030MSG	"General: Driver version not initialized"
+#define SK_PNMI_ERR031		(SK_ERRBASE_PNMI + 31)
+#define SK_PNMI_ERR031MSG	"General: Driver version string too long"
+#define SK_PNMI_ERR032		(SK_ERRBASE_PNMI + 32)
+#define SK_PNMI_ERR032MSG	"General: Cannot read VPD Name for HW descr"
+#define SK_PNMI_ERR033		(SK_ERRBASE_PNMI + 33)
+#define SK_PNMI_ERR033MSG	"General: HW description string too long"
+#define SK_PNMI_ERR034		(SK_ERRBASE_PNMI + 34)
+#define SK_PNMI_ERR034MSG	"General: Unknown OID"
+#define SK_PNMI_ERR035		(SK_ERRBASE_PNMI + 35)
+#define SK_PNMI_ERR035MSG	"Rlmt: Unknown OID"
+#define SK_PNMI_ERR036		(SK_ERRBASE_PNMI + 36)
+#define SK_PNMI_ERR036MSG	""
+#define SK_PNMI_ERR037		(SK_ERRBASE_PNMI + 37)
+#define SK_PNMI_ERR037MSG	"Rlmt: SK_RLMT_MODE_CHANGE event return not 0"
+#define SK_PNMI_ERR038		(SK_ERRBASE_PNMI + 38)
+#define SK_PNMI_ERR038MSG	"Rlmt: SK_RLMT_PREFPORT_CHANGE event return not 0"
+#define SK_PNMI_ERR039		(SK_ERRBASE_PNMI + 39)
+#define SK_PNMI_ERR039MSG	"RlmtStat: Unknown OID"
+#define SK_PNMI_ERR040		(SK_ERRBASE_PNMI + 40)
+#define SK_PNMI_ERR040MSG	"PowerManagement: Unknown OID"
+#define SK_PNMI_ERR041		(SK_ERRBASE_PNMI + 41)
+#define SK_PNMI_ERR041MSG	"MacPrivateConf: Unknown OID"
+#define SK_PNMI_ERR042		(SK_ERRBASE_PNMI + 42)
+#define SK_PNMI_ERR042MSG	"MacPrivateConf: SK_HWEV_SET_ROLE returned not 0"
+#define SK_PNMI_ERR043		(SK_ERRBASE_PNMI + 43)
+#define SK_PNMI_ERR043MSG	"MacPrivateConf: SK_HWEV_SET_LMODE returned not 0"
+#define SK_PNMI_ERR044		(SK_ERRBASE_PNMI + 44)
+#define SK_PNMI_ERR044MSG	"MacPrivateConf: SK_HWEV_SET_FLOWMODE returned not 0"
+#define SK_PNMI_ERR045		(SK_ERRBASE_PNMI + 45)
+#define SK_PNMI_ERR045MSG	"MacPrivateConf: SK_HWEV_SET_SPEED returned not 0"
+#define SK_PNMI_ERR046		(SK_ERRBASE_PNMI + 46)
+#define SK_PNMI_ERR046MSG	"Monitor: Unknown OID"
+#define SK_PNMI_ERR047		(SK_ERRBASE_PNMI + 47)
+#define SK_PNMI_ERR047MSG	"SirqUpdate: Event function returns not 0"
+#define SK_PNMI_ERR048		(SK_ERRBASE_PNMI + 48)
+#define SK_PNMI_ERR048MSG	"RlmtUpdate: Event function returns not 0"
+#define SK_PNMI_ERR049		(SK_ERRBASE_PNMI + 49)
+#define SK_PNMI_ERR049MSG	"SkPnmiInit: Invalid size of 'CounterOffset' struct!!"
+#define SK_PNMI_ERR050		(SK_ERRBASE_PNMI + 50)
+#define SK_PNMI_ERR050MSG	"SkPnmiInit: Invalid size of 'StatAddr' table!!"
+#define SK_PNMI_ERR051		(SK_ERRBASE_PNMI + 51)
+#define SK_PNMI_ERR051MSG	"SkPnmiEvent: Port switch suspicious"
+#define SK_PNMI_ERR052		(SK_ERRBASE_PNMI + 52)
+#define SK_PNMI_ERR052MSG	""
+#define SK_PNMI_ERR053		(SK_ERRBASE_PNMI + 53)
+#define SK_PNMI_ERR053MSG	"General: Driver release date not initialized"
+#define SK_PNMI_ERR054		(SK_ERRBASE_PNMI + 54)
+#define SK_PNMI_ERR054MSG	"General: Driver release date string too long"
+#define SK_PNMI_ERR055		(SK_ERRBASE_PNMI + 55)
+#define SK_PNMI_ERR055MSG	"General: Driver file name not initialized"
+#define SK_PNMI_ERR056		(SK_ERRBASE_PNMI + 56)
+#define SK_PNMI_ERR056MSG	"General: Driver file name string too long"
+
+/*
+ * Management counter macros called by the driver
+ */
+#define SK_PNMI_SET_DRIVER_DESCR(pAC,v)	((pAC)->Pnmi.pDriverDescription = \
+	(char *)(v))
+
+#define SK_PNMI_SET_DRIVER_VER(pAC,v)	((pAC)->Pnmi.pDriverVersion = \
+	(char *)(v))
+
+#define SK_PNMI_SET_DRIVER_RELDATE(pAC,v)	((pAC)->Pnmi.pDriverReleaseDate = \
+	(char *)(v))
+
+#define SK_PNMI_SET_DRIVER_FILENAME(pAC,v)	((pAC)->Pnmi.pDriverFileName = \
+	(char *)(v))
+
+#define SK_PNMI_CNT_TX_QUEUE_LEN(pAC,v,p) \
+	{ \
+		(pAC)->Pnmi.Port[p].TxSwQueueLen = (SK_U64)(v); \
+		if ((pAC)->Pnmi.Port[p].TxSwQueueLen > (pAC)->Pnmi.Port[p].TxSwQueueMax) { \
+			(pAC)->Pnmi.Port[p].TxSwQueueMax = (pAC)->Pnmi.Port[p].TxSwQueueLen; \
+		} \
+	}
+#define SK_PNMI_CNT_TX_RETRY(pAC,p)	(((pAC)->Pnmi.Port[p].TxRetryCts)++)
+#define SK_PNMI_CNT_RX_INTR(pAC,p)	(((pAC)->Pnmi.Port[p].RxIntrCts)++)
+#define SK_PNMI_CNT_TX_INTR(pAC,p)	(((pAC)->Pnmi.Port[p].TxIntrCts)++)
+#define SK_PNMI_CNT_NO_RX_BUF(pAC,p)	(((pAC)->Pnmi.Port[p].RxNoBufCts)++)
+#define SK_PNMI_CNT_NO_TX_BUF(pAC,p)	(((pAC)->Pnmi.Port[p].TxNoBufCts)++)
+#define SK_PNMI_CNT_USED_TX_DESCR(pAC,v,p) \
+	((pAC)->Pnmi.Port[p].TxUsedDescrNo=(SK_U64)(v));
+#define SK_PNMI_CNT_RX_OCTETS_DELIVERED(pAC,v,p) \
+	{ \
+		((pAC)->Pnmi.Port[p].RxDeliveredCts)++; \
+		(pAC)->Pnmi.Port[p].RxOctetsDeliveredCts += (SK_U64)(v); \
+	}
+#define SK_PNMI_CNT_ERR_RECOVERY(pAC,p)	(((pAC)->Pnmi.Port[p].ErrRecoveryCts)++);
+
+#define SK_PNMI_CNT_SYNC_OCTETS(pAC,p,v) \
+	{ \
+		if ((p) < SK_MAX_MACS) { \
+			((pAC)->Pnmi.Port[p].StatSyncCts)++; \
+			(pAC)->Pnmi.Port[p].StatSyncOctetsCts += (SK_U64)(v); \
+		} \
+	}
+
+#define SK_PNMI_CNT_RX_LONGFRAMES(pAC,p) \
+	{ \
+		if ((p) < SK_MAX_MACS) { \
+			((pAC)->Pnmi.Port[p].StatRxLongFrameCts++); \
+		} \
+	}
+
+#define SK_PNMI_CNT_RX_FRAMETOOLONG(pAC,p) \
+	{ \
+		if ((p) < SK_MAX_MACS) { \
+			((pAC)->Pnmi.Port[p].StatRxFrameTooLongCts++); \
+		} \
+	}
+
+#define SK_PNMI_CNT_RX_PMACC_ERR(pAC,p) \
+	{ \
+		if ((p) < SK_MAX_MACS) { \
+			((pAC)->Pnmi.Port[p].StatRxPMaccErr++); \
+		} \
+	}
+
+/*
+ * Conversion Macros
+ */
+#define SK_PNMI_PORT_INST2LOG(i)	((unsigned int)(i) - 1)
+#define SK_PNMI_PORT_LOG2INST(l)	((unsigned int)(l) + 1)
+#define SK_PNMI_PORT_PHYS2LOG(p)	((unsigned int)(p) + 1)
+#define SK_PNMI_PORT_LOG2PHYS(pAC,l)	((unsigned int)(l) - 1)
+#define SK_PNMI_PORT_PHYS2INST(pAC,p)	\
+	(pAC->Pnmi.DualNetActiveFlag ? 2 : ((unsigned int)(p) + 2))
+#define SK_PNMI_PORT_INST2PHYS(pAC,i)	((unsigned int)(i) - 2)
+
+/*
+ * Structure definition for SkPnmiGetStruct and SkPnmiSetStruct
+ */
+#define SK_PNMI_VPD_KEY_SIZE	5
+#define SK_PNMI_VPD_BUFSIZE		(VPD_SIZE)
+#define SK_PNMI_VPD_ENTRIES		(VPD_SIZE / 4)
+#define SK_PNMI_VPD_DATALEN		128 /*  Number of data bytes */
+
+#define SK_PNMI_MULTICAST_LISTLEN	64
+#define SK_PNMI_SENSOR_ENTRIES		(SK_MAX_SENSORS)
+#define SK_PNMI_CHECKSUM_ENTRIES	3
+#define SK_PNMI_MAC_ENTRIES			(SK_MAX_MACS + 1)
+#define SK_PNMI_MONITOR_ENTRIES		20
+#define SK_PNMI_TRAP_ENTRIES		10
+#define SK_PNMI_TRAPLEN				128
+#define SK_PNMI_STRINGLEN1			80
+#define SK_PNMI_STRINGLEN2			25
+#define SK_PNMI_TRAP_QUEUE_LEN		512
+
+typedef struct s_PnmiVpd {
+	char			VpdKey[SK_PNMI_VPD_KEY_SIZE];
+	char			VpdValue[SK_PNMI_VPD_DATALEN];
+	SK_U8			VpdAccess;
+	SK_U8			VpdAction;
+} SK_PNMI_VPD;
+
+typedef struct s_PnmiSensor {
+	SK_U8			SensorIndex;
+	char			SensorDescr[SK_PNMI_STRINGLEN2];
+	SK_U8			SensorType;
+	SK_U32			SensorValue;
+	SK_U32			SensorWarningThresholdLow;
+	SK_U32			SensorWarningThresholdHigh;
+	SK_U32			SensorErrorThresholdLow;
+	SK_U32			SensorErrorThresholdHigh;
+	SK_U8			SensorStatus;
+	SK_U64			SensorWarningCts;
+	SK_U64			SensorErrorCts;
+	SK_U64			SensorWarningTimestamp;
+	SK_U64			SensorErrorTimestamp;
+} SK_PNMI_SENSOR;
+
+typedef struct s_PnmiChecksum {
+	SK_U64			ChecksumRxOkCts;
+	SK_U64			ChecksumRxUnableCts;
+	SK_U64			ChecksumRxErrCts;
+	SK_U64			ChecksumTxOkCts;
+	SK_U64			ChecksumTxUnableCts;
+} SK_PNMI_CHECKSUM;
+
+typedef struct s_PnmiStat {
+	SK_U64			StatTxOkCts;
+	SK_U64			StatTxOctetsOkCts;
+	SK_U64			StatTxBroadcastOkCts;
+	SK_U64			StatTxMulticastOkCts;
+	SK_U64			StatTxUnicastOkCts;
+	SK_U64			StatTxLongFramesCts;
+	SK_U64			StatTxBurstCts;
+	SK_U64			StatTxPauseMacCtrlCts;
+	SK_U64			StatTxMacCtrlCts;
+	SK_U64			StatTxSingleCollisionCts;
+	SK_U64			StatTxMultipleCollisionCts;
+	SK_U64			StatTxExcessiveCollisionCts;
+	SK_U64			StatTxLateCollisionCts;
+	SK_U64			StatTxDeferralCts;
+	SK_U64			StatTxExcessiveDeferralCts;
+	SK_U64			StatTxFifoUnderrunCts;
+	SK_U64			StatTxCarrierCts;
+	SK_U64			Dummy1; /* StatTxUtilization */
+	SK_U64			StatTx64Cts;
+	SK_U64			StatTx127Cts;
+	SK_U64			StatTx255Cts;
+	SK_U64			StatTx511Cts;
+	SK_U64			StatTx1023Cts;
+	SK_U64			StatTxMaxCts;
+	SK_U64			StatTxSyncCts;
+	SK_U64			StatTxSyncOctetsCts;
+	SK_U64			StatRxOkCts;
+	SK_U64			StatRxOctetsOkCts;
+	SK_U64			StatRxBroadcastOkCts;
+	SK_U64			StatRxMulticastOkCts;
+	SK_U64			StatRxUnicastOkCts;
+	SK_U64			StatRxLongFramesCts;
+	SK_U64			StatRxPauseMacCtrlCts;
+	SK_U64			StatRxMacCtrlCts;
+	SK_U64			StatRxPauseMacCtrlErrorCts;
+	SK_U64			StatRxMacCtrlUnknownCts;
+	SK_U64			StatRxBurstCts;
+	SK_U64			StatRxMissedCts;
+	SK_U64			StatRxFramingCts;
+	SK_U64			StatRxFifoOverflowCts;
+	SK_U64			StatRxJabberCts;
+	SK_U64			StatRxCarrierCts;
+	SK_U64			StatRxIRLengthCts;
+	SK_U64			StatRxSymbolCts;
+	SK_U64			StatRxShortsCts;
+	SK_U64			StatRxRuntCts;
+	SK_U64			StatRxCextCts;
+	SK_U64			StatRxTooLongCts;
+	SK_U64			StatRxFcsCts;
+	SK_U64			Dummy2; /* StatRxUtilization */
+	SK_U64			StatRx64Cts;
+	SK_U64			StatRx127Cts;
+	SK_U64			StatRx255Cts;
+	SK_U64			StatRx511Cts;
+	SK_U64			StatRx1023Cts;
+	SK_U64			StatRxMaxCts;
+} SK_PNMI_STAT;
+
+typedef struct s_PnmiConf {
+	char			ConfMacCurrentAddr[6];
+	char			ConfMacFactoryAddr[6];
+	SK_U8			ConfPMD;
+	SK_U8			ConfConnector;
+	SK_U32			ConfPhyType;
+	SK_U32			ConfPhyMode;
+	SK_U8			ConfLinkCapability;
+	SK_U8			ConfLinkMode;
+	SK_U8			ConfLinkModeStatus;
+	SK_U8			ConfLinkStatus;
+	SK_U8			ConfFlowCtrlCapability;
+	SK_U8			ConfFlowCtrlMode;
+	SK_U8			ConfFlowCtrlStatus;
+	SK_U8			ConfPhyOperationCapability;
+	SK_U8			ConfPhyOperationMode;
+	SK_U8			ConfPhyOperationStatus;
+	SK_U8			ConfSpeedCapability;
+	SK_U8			ConfSpeedMode;
+	SK_U8			ConfSpeedStatus;
+} SK_PNMI_CONF;
+
+typedef struct s_PnmiRlmt {
+	SK_U32			RlmtIndex;
+	SK_U32			RlmtStatus;
+	SK_U64			RlmtTxHelloCts;
+	SK_U64			RlmtRxHelloCts;
+	SK_U64			RlmtTxSpHelloReqCts;
+	SK_U64			RlmtRxSpHelloCts;
+} SK_PNMI_RLMT;
+
+typedef struct s_PnmiRlmtMonitor {
+	SK_U32			RlmtMonitorIndex;
+	char			RlmtMonitorAddr[6];
+	SK_U64			RlmtMonitorErrorCts;
+	SK_U64			RlmtMonitorTimestamp;
+	SK_U8			RlmtMonitorAdmin;
+} SK_PNMI_RLMT_MONITOR;
+
+typedef struct s_PnmiRequestStatus {
+	SK_U32			ErrorStatus;
+	SK_U32			ErrorOffset;
+} SK_PNMI_REQUEST_STATUS;
+
+typedef struct s_PnmiStrucData {
+	SK_U32			MgmtDBVersion;
+	SK_PNMI_REQUEST_STATUS	ReturnStatus;
+	SK_U32			VpdFreeBytes;
+	char			VpdEntriesList[SK_PNMI_VPD_ENTRIES * SK_PNMI_VPD_KEY_SIZE];
+	SK_U32			VpdEntriesNumber;
+	SK_PNMI_VPD		Vpd[SK_PNMI_VPD_ENTRIES];
+	SK_U32			PortNumber;
+	SK_U32			DeviceType;
+	char			DriverDescr[SK_PNMI_STRINGLEN1];
+	char			DriverVersion[SK_PNMI_STRINGLEN2];
+	char			DriverReleaseDate[SK_PNMI_STRINGLEN1];
+	char			DriverFileName[SK_PNMI_STRINGLEN1];
+	char			HwDescr[SK_PNMI_STRINGLEN1];
+	char			HwVersion[SK_PNMI_STRINGLEN2];
+	SK_U16			Chipset;
+	SK_U32			ChipId;
+	SK_U8			VauxAvail;
+	SK_U32			RamSize;
+	SK_U32			MtuSize;
+	SK_U32			Action;
+	SK_U32			TestResult;
+	SK_U8			BusType;
+	SK_U8			BusSpeed;
+	SK_U8			BusWidth;
+	SK_U8			SensorNumber;
+	SK_PNMI_SENSOR	Sensor[SK_PNMI_SENSOR_ENTRIES];
+	SK_U8			ChecksumNumber;
+	SK_PNMI_CHECKSUM	Checksum[SK_PNMI_CHECKSUM_ENTRIES];
+	SK_PNMI_STAT	Stat[SK_PNMI_MAC_ENTRIES];
+	SK_PNMI_CONF	Conf[SK_PNMI_MAC_ENTRIES];
+	SK_U8			RlmtMode;
+	SK_U32			RlmtPortNumber;
+	SK_U8			RlmtPortActive;
+	SK_U8			RlmtPortPreferred;
+	SK_U64			RlmtChangeCts;
+	SK_U64			RlmtChangeTime;
+	SK_U64			RlmtChangeEstimate;
+	SK_U64			RlmtChangeThreshold;
+	SK_PNMI_RLMT	Rlmt[SK_MAX_MACS];
+	SK_U32			RlmtMonitorNumber;
+	SK_PNMI_RLMT_MONITOR	RlmtMonitor[SK_PNMI_MONITOR_ENTRIES];
+	SK_U32			TrapNumber;
+	SK_U8			Trap[SK_PNMI_TRAP_QUEUE_LEN];
+	SK_U64			TxSwQueueLen;
+	SK_U64			TxSwQueueMax;
+	SK_U64			TxRetryCts;
+	SK_U64			RxIntrCts;
+	SK_U64			TxIntrCts;
+	SK_U64			RxNoBufCts;
+	SK_U64			TxNoBufCts;
+	SK_U64			TxUsedDescrNo;
+	SK_U64			RxDeliveredCts;
+	SK_U64			RxOctetsDeliveredCts;
+	SK_U64			RxHwErrorsCts;
+	SK_U64			TxHwErrorsCts;
+	SK_U64			InErrorsCts;
+	SK_U64			OutErrorsCts;
+	SK_U64			ErrRecoveryCts;
+	SK_U64			SysUpTime;
+} SK_PNMI_STRUCT_DATA;
+
+#define SK_PNMI_STRUCT_SIZE	(sizeof(SK_PNMI_STRUCT_DATA))
+#define SK_PNMI_MIN_STRUCT_SIZE	((unsigned int)(SK_UPTR)\
+				 &(((SK_PNMI_STRUCT_DATA *)0)->VpdFreeBytes))
+														/*
+														 * ReturnStatus field
+														 * must be located
+														 * before VpdFreeBytes
+														 */
+
+/*
+ * Various definitions
+ */
+#define SK_PNMI_MAX_PROTOS		3
+
+#define SK_PNMI_CNT_NO			66	/* Must have the value of the enum
+									 * SK_PNMI_MAX_IDX. Define SK_PNMI_CHECK
+									 * for check while init phase 1
+									 */
+
+/*
+ * Estimate data structure
+ */
+typedef struct s_PnmiEstimate {
+	unsigned int	EstValueIndex;
+	SK_U64			EstValue[7];
+	SK_U64			Estimate;
+	SK_TIMER		EstTimer;
+} SK_PNMI_ESTIMATE;
+
+
+/*
+ * VCT timer data structure
+ */
+typedef struct s_VctTimer {
+	SK_TIMER		VctTimer;
+} SK_PNMI_VCT_TIMER;
+
+
+/*
+ * PNMI specific adapter context structure
+ */
+typedef struct s_PnmiPort {
+	SK_U64			StatSyncCts;
+	SK_U64			StatSyncOctetsCts;
+	SK_U64			StatRxLongFrameCts;
+	SK_U64			StatRxFrameTooLongCts;
+	SK_U64			StatRxPMaccErr;
+	SK_U64			TxSwQueueLen;
+	SK_U64			TxSwQueueMax;
+	SK_U64			TxRetryCts;
+	SK_U64			RxIntrCts;
+	SK_U64			TxIntrCts;
+	SK_U64			RxNoBufCts;
+	SK_U64			TxNoBufCts;
+	SK_U64			TxUsedDescrNo;
+	SK_U64			RxDeliveredCts;
+	SK_U64			RxOctetsDeliveredCts;
+	SK_U64			RxHwErrorsCts;
+	SK_U64			TxHwErrorsCts;
+	SK_U64			InErrorsCts;
+	SK_U64			OutErrorsCts;
+	SK_U64			ErrRecoveryCts;
+	SK_U64			RxShortZeroMark;
+	SK_U64			CounterOffset[SK_PNMI_CNT_NO];
+	SK_U32			CounterHigh[SK_PNMI_CNT_NO];
+	SK_BOOL			ActiveFlag;
+	SK_U8			Align[3];
+} SK_PNMI_PORT;
+
+
+typedef struct s_PnmiData {
+	SK_PNMI_PORT	Port	[SK_MAX_MACS];
+	SK_PNMI_PORT	BufPort	[SK_MAX_MACS]; /* 2002-09-13 pweber  */
+	SK_U64			VirtualCounterOffset[SK_PNMI_CNT_NO];
+	SK_U32			TestResult;
+	char			HwVersion[10];
+	SK_U16			Align01;
+
+	char			*pDriverDescription;
+	char			*pDriverVersion;
+	char			*pDriverReleaseDate;
+	char			*pDriverFileName;
+
+	int				MacUpdatedFlag;
+	int				RlmtUpdatedFlag;
+	int				SirqUpdatedFlag;
+
+	SK_U64			RlmtChangeCts;
+	SK_U64			RlmtChangeTime;
+	SK_PNMI_ESTIMATE	RlmtChangeEstimate;
+	SK_U64			RlmtChangeThreshold;
+
+	SK_U64			StartUpTime;
+	SK_U32			DeviceType;
+	char			PciBusSpeed;
+	char			PciBusWidth;
+	char			Chipset;
+	char			PMD;
+	char			Connector;
+	SK_BOOL			DualNetActiveFlag;
+	SK_U16			Align02;
+
+	char			TrapBuf[SK_PNMI_TRAP_QUEUE_LEN];
+	unsigned int	TrapBufFree;
+	unsigned int	TrapQueueBeg;
+	unsigned int	TrapQueueEnd;
+	unsigned int	TrapBufPad;
+	unsigned int	TrapUnique;
+	SK_U8		VctStatus[SK_MAX_MACS];
+	SK_PNMI_VCT	VctBackup[SK_MAX_MACS];
+	SK_PNMI_VCT_TIMER VctTimeout[SK_MAX_MACS];
+#ifdef SK_DIAG_SUPPORT
+	SK_U32			DiagAttached;
+#endif /* SK_DIAG_SUPPORT */
+} SK_PNMI;
+
+
+/*
+ * Function prototypes
+ */
+extern int SkPnmiInit(SK_AC *pAC, SK_IOC IoC, int Level);
+extern int SkPnmiSetVar(SK_AC *pAC, SK_IOC IoC, SK_U32 Id, void* pBuf,
+	unsigned int *pLen, SK_U32 Instance, SK_U32 NetIndex);
+extern int SkPnmiGetStruct(SK_AC *pAC, SK_IOC IoC, void* pBuf,
+	unsigned int *pLen, SK_U32 NetIndex);
+extern int SkPnmiPreSetStruct(SK_AC *pAC, SK_IOC IoC, void* pBuf,
+	unsigned int *pLen, SK_U32 NetIndex);
+extern int SkPnmiSetStruct(SK_AC *pAC, SK_IOC IoC, void* pBuf,
+	unsigned int *pLen, SK_U32 NetIndex);
+extern int SkPnmiEvent(SK_AC *pAC, SK_IOC IoC, SK_U32 Event,
+	SK_EVPARA Param);
+extern int SkPnmiGenIoctl(SK_AC *pAC, SK_IOC IoC, void * pBuf,
+	unsigned int * pLen, SK_U32 NetIndex);
+
+#endif
diff --git a/drivers/net/sk98lin/h/skgesirq.h b/drivers/net/sk98lin/h/skgesirq.h
new file mode 100644
index 0000000..3eec627
--- /dev/null
+++ b/drivers/net/sk98lin/h/skgesirq.h
@@ -0,0 +1,110 @@
+/******************************************************************************
+ *
+ * Name:	skgesirq.h
+ * Project:	Gigabit Ethernet Adapters, Common Modules
+ * Version:	$Revision: 1.30 $
+ * Date:	$Date: 2003/07/04 12:34:13 $
+ * Purpose:	SK specific Gigabit Ethernet special IRQ functions
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *	(C)Copyright 1998-2002 SysKonnect.
+ *	(C)Copyright 2002-2003 Marvell.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+#ifndef _INC_SKGESIRQ_H_
+#define _INC_SKGESIRQ_H_
+
+/* Define return codes of SkGePortCheckUp and CheckShort */
+#define	SK_HW_PS_NONE		0	/* No action needed */
+#define	SK_HW_PS_RESTART	1	/* Restart needed */
+#define	SK_HW_PS_LINK		2	/* Link Up actions needed */
+
+/*
+ * Define the Event the special IRQ/INI module can handle
+ */
+#define SK_HWEV_WATIM			1	/* Timeout for WA Errata #2 XMAC */
+#define SK_HWEV_PORT_START		2	/* Port Start Event by RLMT */
+#define SK_HWEV_PORT_STOP		3	/* Port Stop Event by RLMT */
+#define SK_HWEV_CLEAR_STAT		4	/* Clear Statistics by PNMI */
+#define SK_HWEV_UPDATE_STAT		5	/* Update Statistics by PNMI */
+#define SK_HWEV_SET_LMODE		6	/* Set Link Mode by PNMI */
+#define SK_HWEV_SET_FLOWMODE	7	/* Set Flow Control Mode by PNMI */
+#define SK_HWEV_SET_ROLE		8	/* Set Master/Slave (Role) by PNMI */
+#define SK_HWEV_SET_SPEED		9	/* Set Link Speed by PNMI */
+#define SK_HWEV_HALFDUP_CHK		10	/* Half Duplex Hangup Workaround */
+
+#define SK_WA_ACT_TIME		(5000000UL)	/* 5 sec */
+#define SK_WA_INA_TIME		(100000UL)	/* 100 msec */
+
+#define SK_HALFDUP_CHK_TIME	(10000UL)	/* 10 msec */
+
+/*
+ * Define the error numbers and messages
+ */
+#define SKERR_SIRQ_E001		(SK_ERRBASE_SIRQ+0)
+#define SKERR_SIRQ_E001MSG	"Unknown event"
+#define SKERR_SIRQ_E002		(SKERR_SIRQ_E001+1)
+#define SKERR_SIRQ_E002MSG	"Packet timeout RX1"
+#define SKERR_SIRQ_E003		(SKERR_SIRQ_E002+1)
+#define SKERR_SIRQ_E003MSG	"Packet timeout RX2"
+#define SKERR_SIRQ_E004		(SKERR_SIRQ_E003+1)
+#define SKERR_SIRQ_E004MSG	"MAC 1 not correctly initialized"
+#define SKERR_SIRQ_E005		(SKERR_SIRQ_E004+1)
+#define SKERR_SIRQ_E005MSG	"MAC 2 not correctly initialized"
+#define SKERR_SIRQ_E006		(SKERR_SIRQ_E005+1)
+#define SKERR_SIRQ_E006MSG	"CHECK failure R1"
+#define SKERR_SIRQ_E007		(SKERR_SIRQ_E006+1)
+#define SKERR_SIRQ_E007MSG	"CHECK failure R2"
+#define SKERR_SIRQ_E008		(SKERR_SIRQ_E007+1)
+#define SKERR_SIRQ_E008MSG	"CHECK failure XS1"
+#define SKERR_SIRQ_E009		(SKERR_SIRQ_E008+1)
+#define SKERR_SIRQ_E009MSG	"CHECK failure XA1"
+#define SKERR_SIRQ_E010		(SKERR_SIRQ_E009+1)
+#define SKERR_SIRQ_E010MSG	"CHECK failure XS2"
+#define SKERR_SIRQ_E011		(SKERR_SIRQ_E010+1)
+#define SKERR_SIRQ_E011MSG	"CHECK failure XA2"
+#define SKERR_SIRQ_E012		(SKERR_SIRQ_E011+1)
+#define SKERR_SIRQ_E012MSG	"unexpected IRQ Master error"
+#define SKERR_SIRQ_E013		(SKERR_SIRQ_E012+1)
+#define SKERR_SIRQ_E013MSG	"unexpected IRQ Status error"
+#define SKERR_SIRQ_E014		(SKERR_SIRQ_E013+1)
+#define SKERR_SIRQ_E014MSG	"Parity error on RAM (read)"
+#define SKERR_SIRQ_E015		(SKERR_SIRQ_E014+1)
+#define SKERR_SIRQ_E015MSG	"Parity error on RAM (write)"
+#define SKERR_SIRQ_E016		(SKERR_SIRQ_E015+1)
+#define SKERR_SIRQ_E016MSG	"Parity error MAC 1"
+#define SKERR_SIRQ_E017		(SKERR_SIRQ_E016+1)
+#define SKERR_SIRQ_E017MSG	"Parity error MAC 2"
+#define SKERR_SIRQ_E018		(SKERR_SIRQ_E017+1)
+#define SKERR_SIRQ_E018MSG	"Parity error RX 1"
+#define SKERR_SIRQ_E019		(SKERR_SIRQ_E018+1)
+#define SKERR_SIRQ_E019MSG	"Parity error RX 2"
+#define SKERR_SIRQ_E020		(SKERR_SIRQ_E019+1)
+#define SKERR_SIRQ_E020MSG	"MAC transmit FIFO underrun"
+#define SKERR_SIRQ_E021		(SKERR_SIRQ_E020+1)
+#define SKERR_SIRQ_E021MSG	"Spurious TWSI interrupt"
+#define SKERR_SIRQ_E022		(SKERR_SIRQ_E021+1)
+#define SKERR_SIRQ_E022MSG	"Cable pair swap error"
+#define SKERR_SIRQ_E023		(SKERR_SIRQ_E022+1)
+#define SKERR_SIRQ_E023MSG	"Auto-negotiation error"
+#define SKERR_SIRQ_E024		(SKERR_SIRQ_E023+1)
+#define SKERR_SIRQ_E024MSG	"FIFO overflow error"
+#define SKERR_SIRQ_E025		(SKERR_SIRQ_E024+1)
+#define SKERR_SIRQ_E025MSG	"2 Pair Downshift detected"
+
+extern void SkGeSirqIsr(SK_AC *pAC, SK_IOC IoC, SK_U32 Istatus);
+extern int  SkGeSirqEvent(SK_AC *pAC, SK_IOC IoC, SK_U32 Event, SK_EVPARA Para);
+extern void SkHWLinkDown(SK_AC *pAC, SK_IOC IoC, int Port);
+
+#endif	/* _INC_SKGESIRQ_H_ */
diff --git a/drivers/net/sk98lin/h/ski2c.h b/drivers/net/sk98lin/h/ski2c.h
new file mode 100644
index 0000000..6a63f4a
--- /dev/null
+++ b/drivers/net/sk98lin/h/ski2c.h
@@ -0,0 +1,174 @@
+/******************************************************************************
+ *
+ * Name:	ski2c.h
+ * Project:	Gigabit Ethernet Adapters, TWSI-Module
+ * Version:	$Revision: 1.35 $
+ * Date:	$Date: 2003/10/20 09:06:30 $
+ * Purpose:	Defines to access Voltage and Temperature Sensor
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *	(C)Copyright 1998-2002 SysKonnect.
+ *	(C)Copyright 2002-2003 Marvell.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/*
+ * SKI2C.H	contains all I2C specific defines
+ */
+
+#ifndef _SKI2C_H_
+#define _SKI2C_H_
+
+typedef struct  s_Sensor SK_SENSOR;
+
+#include "h/skgei2c.h"
+
+/*
+ * Define the I2C events.
+ */
+#define SK_I2CEV_IRQ	1	/* IRQ happened Event */
+#define SK_I2CEV_TIM	2	/* Timeout event */
+#define SK_I2CEV_CLEAR	3	/* Clear MIB Values */
+
+/*
+ * Define READ and WRITE Constants.
+ */
+#define I2C_READ	0
+#define I2C_WRITE	1
+#define I2C_BURST	1
+#define I2C_SINGLE	0
+
+#define SKERR_I2C_E001		(SK_ERRBASE_I2C+0)
+#define SKERR_I2C_E001MSG	"Sensor index unknown"
+#define SKERR_I2C_E002		(SKERR_I2C_E001+1)
+#define SKERR_I2C_E002MSG	"TWSI: transfer does not complete"
+#define SKERR_I2C_E003		(SKERR_I2C_E002+1)
+#define SKERR_I2C_E003MSG	"LM80: NAK on device send"
+#define SKERR_I2C_E004		(SKERR_I2C_E003+1)
+#define SKERR_I2C_E004MSG	"LM80: NAK on register send"
+#define SKERR_I2C_E005		(SKERR_I2C_E004+1)
+#define SKERR_I2C_E005MSG	"LM80: NAK on device (2) send"
+#define SKERR_I2C_E006		(SKERR_I2C_E005+1)
+#define SKERR_I2C_E006MSG	"Unknown event"
+#define SKERR_I2C_E007		(SKERR_I2C_E006+1)
+#define SKERR_I2C_E007MSG	"LM80 read out of state"
+#define SKERR_I2C_E008		(SKERR_I2C_E007+1)
+#define SKERR_I2C_E008MSG	"Unexpected sensor read completed"
+#define SKERR_I2C_E009		(SKERR_I2C_E008+1)
+#define SKERR_I2C_E009MSG	"WARNING: temperature sensor out of range"
+#define SKERR_I2C_E010		(SKERR_I2C_E009+1)
+#define SKERR_I2C_E010MSG	"WARNING: voltage sensor out of range"
+#define SKERR_I2C_E011		(SKERR_I2C_E010+1)
+#define SKERR_I2C_E011MSG	"ERROR: temperature sensor out of range"
+#define SKERR_I2C_E012		(SKERR_I2C_E011+1)
+#define SKERR_I2C_E012MSG	"ERROR: voltage sensor out of range"
+#define SKERR_I2C_E013		(SKERR_I2C_E012+1)
+#define SKERR_I2C_E013MSG	"ERROR: couldn't init sensor"
+#define SKERR_I2C_E014		(SKERR_I2C_E013+1)
+#define SKERR_I2C_E014MSG	"WARNING: fan sensor out of range"
+#define SKERR_I2C_E015		(SKERR_I2C_E014+1)
+#define SKERR_I2C_E015MSG	"ERROR: fan sensor out of range"
+#define SKERR_I2C_E016		(SKERR_I2C_E015+1)
+#define SKERR_I2C_E016MSG	"TWSI: active transfer does not complete"
+
+/*
+ * Define Timeout values
+ */
+#define SK_I2C_TIM_LONG		2000000L	/* 2 seconds */
+#define SK_I2C_TIM_SHORT	 100000L	/* 100 milliseconds */
+#define SK_I2C_TIM_WATCH	1000000L	/* 1 second */
+
+/*
+ * Define trap and error log hold times
+ */
+#ifndef	SK_SEN_ERR_TR_HOLD
+#define SK_SEN_ERR_TR_HOLD		(4*SK_TICKS_PER_SEC)
+#endif
+#ifndef	SK_SEN_ERR_LOG_HOLD
+#define SK_SEN_ERR_LOG_HOLD		(60*SK_TICKS_PER_SEC)
+#endif
+#ifndef	SK_SEN_WARN_TR_HOLD
+#define SK_SEN_WARN_TR_HOLD		(15*SK_TICKS_PER_SEC)
+#endif
+#ifndef	SK_SEN_WARN_LOG_HOLD
+#define SK_SEN_WARN_LOG_HOLD	(15*60*SK_TICKS_PER_SEC)
+#endif
+
+/*
+ * Defines for SenType
+ */
+#define SK_SEN_UNKNOWN	0
+#define SK_SEN_TEMP		1
+#define SK_SEN_VOLT		2
+#define SK_SEN_FAN		3
+
+/*
+ * Define for the SenErrorFlag
+ */
+#define SK_SEN_ERR_NOT_PRESENT	0	/* Error Flag: Sensor not present */
+#define SK_SEN_ERR_OK			1	/* Error Flag: O.K. */
+#define SK_SEN_ERR_WARN			2	/* Error Flag: Warning */
+#define SK_SEN_ERR_ERR			3	/* Error Flag: Error */
+#define SK_SEN_ERR_FAULTY		4	/* Error Flag: Faulty */
+
+/*
+ * Define the Sensor struct
+ */
+struct	s_Sensor {
+	char	*SenDesc;			/* Description */
+	int		SenType;			/* Voltage or Temperature */
+	SK_I32	SenValue;			/* Current value of the sensor */
+	SK_I32	SenThreErrHigh;		/* High error Threshhold of this sensor */
+	SK_I32	SenThreWarnHigh;	/* High warning Threshhold of this sensor */
+	SK_I32	SenThreErrLow;		/* Lower error Threshold of the sensor */
+	SK_I32	SenThreWarnLow;		/* Lower warning Threshold of the sensor */
+	int		SenErrFlag;			/* Sensor indicated an error */
+	SK_BOOL	SenInit;			/* Is sensor initialized ? */
+	SK_U64	SenErrCts;			/* Error trap counter */
+	SK_U64	SenWarnCts;			/* Warning trap counter */
+	SK_U64	SenBegErrTS;		/* Begin error timestamp */
+	SK_U64	SenBegWarnTS;		/* Begin warning timestamp */
+	SK_U64	SenLastErrTrapTS;	/* Last error trap timestamp */
+	SK_U64	SenLastErrLogTS;	/* Last error log timestamp */
+	SK_U64	SenLastWarnTrapTS;	/* Last warning trap timestamp */
+	SK_U64	SenLastWarnLogTS;	/* Last warning log timestamp */
+	int		SenState;			/* Sensor State (see HW specific include) */
+	int		(*SenRead)(SK_AC *pAC, SK_IOC IoC, struct s_Sensor *pSen);
+								/* Sensors read function */
+	SK_U16	SenReg;				/* Register Address for this sensor */
+	SK_U8	SenDev;				/* Device Selection for this sensor */
+};
+
+typedef	struct	s_I2c {
+	SK_SENSOR	SenTable[SK_MAX_SENSORS];	/* Sensor Table */
+	int			CurrSens;	/* Which sensor is currently queried */
+	int			MaxSens;	/* Max. number of sensors */
+	int			TimerMode;	/* Use the timer also to watch the state machine */
+	int			InitLevel;	/* Initialized Level */
+#ifndef SK_DIAG
+	int			DummyReads;	/* Number of non-checked dummy reads */
+	SK_TIMER	SenTimer;	/* Sensors timer */
+#endif /* !SK_DIAG */
+} SK_I2C;
+
+extern int SkI2cInit(SK_AC *pAC, SK_IOC IoC, int Level);
+#ifdef SK_DIAG
+extern	SK_U32 SkI2cRead(SK_AC *pAC, SK_IOC IoC, int Dev, int Size, int Reg,
+						 int Burst);
+#else /* !SK_DIAG */
+extern int SkI2cEvent(SK_AC *pAC, SK_IOC IoC, SK_U32 Event, SK_EVPARA Para);
+extern void SkI2cWaitIrq(SK_AC *pAC, SK_IOC IoC);
+extern void SkI2cIsr(SK_AC *pAC, SK_IOC IoC);
+#endif /* !SK_DIAG */
+#endif /* n_SKI2C_H */
+
diff --git a/drivers/net/sk98lin/h/skqueue.h b/drivers/net/sk98lin/h/skqueue.h
new file mode 100644
index 0000000..2ec40d4
--- /dev/null
+++ b/drivers/net/sk98lin/h/skqueue.h
@@ -0,0 +1,94 @@
+/******************************************************************************
+ *
+ * Name:	skqueue.h
+ * Project:	Gigabit Ethernet Adapters, Event Scheduler Module
+ * Version:	$Revision: 1.16 $
+ * Date:	$Date: 2003/09/16 12:50:32 $
+ * Purpose:	Defines for the Event queue
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *	(C)Copyright 1998-2002 SysKonnect GmbH.
+ *	(C)Copyright 2002-2003 Marvell.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/*
+ * SKQUEUE.H	contains all defines and types for the event queue
+ */
+
+#ifndef _SKQUEUE_H_
+#define _SKQUEUE_H_
+
+
+/*
+ * define the event classes to be served
+ */
+#define	SKGE_DRV	1	/* Driver Event Class */
+#define	SKGE_RLMT	2	/* RLMT Event Class */
+#define	SKGE_I2C	3	/* I2C Event Class */
+#define	SKGE_PNMI	4	/* PNMI Event Class */
+#define	SKGE_CSUM	5	/* Checksum Event Class */
+#define	SKGE_HWAC	6	/* Hardware Access Event Class */
+
+#define	SKGE_SWT	9	/* Software Timer Event Class */
+#define	SKGE_LACP	10	/* LACP Aggregation Event Class */
+#define	SKGE_RSF	11	/* RSF Aggregation Event Class */
+#define	SKGE_MARKER	12	/* MARKER Aggregation Event Class */
+#define	SKGE_FD		13	/* FD Distributor Event Class */
+
+/*
+ * define event queue as circular buffer
+ */
+#define SK_MAX_EVENT	64
+
+/*
+ * Parameter union for the Para stuff
+ */
+typedef	union u_EvPara {
+	void	*pParaPtr;	/* Parameter Pointer */
+	SK_U64	Para64;		/* Parameter 64bit version */
+	SK_U32	Para32[2];	/* Parameter Array of 32bit parameters */
+} SK_EVPARA;
+
+/*
+ * Event Queue
+ *	skqueue.c
+ * events are class/value pairs
+ *	class	is addressee, e.g. RLMT, PNMI etc.
+ *	value	is command, e.g. line state change, ring op change etc.
+ */
+typedef	struct s_EventElem {
+	SK_U32		Class;			/* Event class */
+	SK_U32		Event;			/* Event value */
+	SK_EVPARA	Para;			/* Event parameter */
+} SK_EVENTELEM;
+
+typedef	struct s_Queue {
+	SK_EVENTELEM	EvQueue[SK_MAX_EVENT];
+	SK_EVENTELEM	*EvPut;
+	SK_EVENTELEM	*EvGet;
+} SK_QUEUE;
+
+extern	void SkEventInit(SK_AC *pAC, SK_IOC Ioc, int Level);
+extern	void SkEventQueue(SK_AC *pAC, SK_U32 Class, SK_U32 Event,
+	SK_EVPARA Para);
+extern	int SkEventDispatcher(SK_AC *pAC, SK_IOC Ioc);
+
+
+/* Define Error Numbers and messages */
+#define	SKERR_Q_E001	(SK_ERRBASE_QUEUE+0)
+#define	SKERR_Q_E001MSG	"Event queue overflow"
+#define	SKERR_Q_E002	(SKERR_Q_E001+1)
+#define	SKERR_Q_E002MSG	"Undefined event class"
+#endif	/* _SKQUEUE_H_ */
+
diff --git a/drivers/net/sk98lin/h/skrlmt.h b/drivers/net/sk98lin/h/skrlmt.h
new file mode 100644
index 0000000..ca75dfd
--- /dev/null
+++ b/drivers/net/sk98lin/h/skrlmt.h
@@ -0,0 +1,438 @@
+/******************************************************************************
+ *
+ * Name:	skrlmt.h
+ * Project:	GEnesis, PCI Gigabit Ethernet Adapter
+ * Version:	$Revision: 1.37 $
+ * Date:	$Date: 2003/04/15 09:43:43 $
+ * Purpose:	Header file for Redundant Link ManagemenT.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *	(C)Copyright 1998-2002 SysKonnect GmbH.
+ *	(C)Copyright 2002-2003 Marvell.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * Description:
+ *
+ * This is the header file for Redundant Link ManagemenT.
+ *
+ * Include File Hierarchy:
+ *
+ *	"skdrv1st.h"
+ *	...
+ *	"sktypes.h"
+ *	"skqueue.h"
+ *	"skaddr.h"
+ *	"skrlmt.h"
+ *	...
+ *	"skdrv2nd.h"
+ *
+ ******************************************************************************/
+
+#ifndef __INC_SKRLMT_H
+#define __INC_SKRLMT_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif	/* cplusplus */
+
+/* defines ********************************************************************/
+
+#define	SK_RLMT_NET_DOWN_TEMP	1	/* NET_DOWN due to last port down. */
+#define	SK_RLMT_NET_DOWN_FINAL	2	/* NET_DOWN due to RLMT_STOP. */
+
+/* ----- Default queue sizes - must be multiples of 8 KB ----- */
+
+/* Less than 8 KB free in RX queue => pause frames. */
+#define SK_RLMT_STANDBY_QRXSIZE	128	/* Size of rx standby queue in KB. */
+#define SK_RLMT_STANDBY_QXASIZE	32	/* Size of async standby queue in KB. */
+#define SK_RLMT_STANDBY_QXSSIZE	0	/* Size of sync standby queue in KB. */
+
+#define SK_RLMT_MAX_TX_BUF_SIZE	60	/* Maximum RLMT transmit size. */
+
+/* ----- PORT states ----- */
+
+#define SK_RLMT_PS_INIT			0	/* Port state: Init. */
+#define SK_RLMT_PS_LINK_DOWN	1	/* Port state: Link down. */
+#define SK_RLMT_PS_DOWN			2	/* Port state: Port down. */
+#define SK_RLMT_PS_GOING_UP		3	/* Port state: Going up. */
+#define SK_RLMT_PS_UP			4	/* Port state: Up. */
+
+/* ----- RLMT states ----- */
+
+#define SK_RLMT_RS_INIT			0	/* RLMT state: Init. */
+#define SK_RLMT_RS_NET_DOWN		1	/* RLMT state: Net down. */
+#define SK_RLMT_RS_NET_UP		2	/* RLMT state: Net up. */
+
+/* ----- PORT events ----- */
+
+#define SK_RLMT_LINK_UP			1001	/* Link came up. */
+#define SK_RLMT_LINK_DOWN		1002	/* Link went down. */
+#define SK_RLMT_PORT_ADDR		1003	/* Port address changed. */
+
+/* ----- RLMT events ----- */
+
+#define SK_RLMT_START			2001	/* Start RLMT. */
+#define SK_RLMT_STOP			2002	/* Stop RLMT. */
+#define SK_RLMT_PACKET_RECEIVED	2003	/* Packet was received for RLMT. */
+#define SK_RLMT_STATS_CLEAR		2004	/* Clear statistics. */
+#define SK_RLMT_STATS_UPDATE	2005	/* Update statistics. */
+#define SK_RLMT_PREFPORT_CHANGE	2006	/* Change preferred port. */
+#define SK_RLMT_MODE_CHANGE		2007	/* New RlmtMode. */
+#define SK_RLMT_SET_NETS		2008	/* Number of Nets (1 or 2). */
+
+/* ----- RLMT mode bits ----- */
+
+/*
+ * CAUTION:	These defines are private to RLMT.
+ *			Please use the RLMT mode defines below.
+ */
+
+#define SK_RLMT_CHECK_LINK		  1		/* Check Link. */
+#define SK_RLMT_CHECK_LOC_LINK	  2		/* Check other link on same adapter. */
+#define SK_RLMT_CHECK_SEG		  4		/* Check segmentation. */
+
+#ifndef RLMT_CHECK_REMOTE
+#define SK_RLMT_CHECK_OTHERS	SK_RLMT_CHECK_LOC_LINK
+#else	/* RLMT_CHECK_REMOTE */
+#define SK_RLMT_CHECK_REM_LINK	  8		/* Check link(s) on other adapter(s). */
+#define SK_RLMT_MAX_REMOTE_PORTS_CHECKED	3
+#define SK_RLMT_CHECK_OTHERS	\
+		(SK_RLMT_CHECK_LOC_LINK | SK_RLMT_CHECK_REM_LINK)
+#endif	/* RLMT_CHECK_REMOTE */
+
+#ifndef SK_RLMT_ENABLE_TRANSPARENT
+#define SK_RLMT_TRANSPARENT		  0		/* RLMT transparent - inactive. */
+#else	/* SK_RLMT_ENABLE_TRANSPARENT */
+#define SK_RLMT_TRANSPARENT		128		/* RLMT transparent. */
+#endif	/* SK_RLMT_ENABLE_TRANSPARENT */
+
+/* ----- RLMT modes ----- */
+
+/* Check Link State. */
+#define SK_RLMT_MODE_CLS	(SK_RLMT_CHECK_LINK)
+
+/* Check Local Ports: check other links on the same adapter. */
+#define SK_RLMT_MODE_CLP	(SK_RLMT_CHECK_LINK | SK_RLMT_CHECK_LOC_LINK)
+
+/* Check Local Ports and Segmentation Status. */
+#define SK_RLMT_MODE_CLPSS	\
+		(SK_RLMT_CHECK_LINK | SK_RLMT_CHECK_LOC_LINK | SK_RLMT_CHECK_SEG)
+
+#ifdef RLMT_CHECK_REMOTE
+/* Check Local and Remote Ports: check links (local or remote). */
+	Name of define TBD!
+#define SK_RLMT_MODE_CRP	\
+		(SK_RLMT_CHECK_LINK | SK_RLMT_CHECK_LOC_LINK | SK_RLMT_CHECK_REM_LINK)
+
+/* Check Local and Remote Ports and Segmentation Status. */
+	Name of define TBD!
+#define SK_RLMT_MODE_CRPSS	\
+		(SK_RLMT_CHECK_LINK | SK_RLMT_CHECK_LOC_LINK | \
+		SK_RLMT_CHECK_REM_LINK | SK_RLMT_CHECK_SEG)
+#endif	/* RLMT_CHECK_REMOTE */
+
+/* ----- RLMT lookahead result bits ----- */
+
+#define SK_RLMT_RX_RLMT			1	/* Give packet to RLMT. */
+#define SK_RLMT_RX_PROTOCOL		2	/* Give packet to protocol. */
+
+/* Macros */
+
+#if 0
+SK_AC		*pAC		/* adapter context */
+SK_U32		PortNum		/* receiving port */
+unsigned	PktLen		/* received packet's length */
+SK_BOOL		IsBc		/* Flag: packet is broadcast */
+unsigned	*pOffset	/* offs. of bytes to present to SK_RLMT_LOOKAHEAD */
+unsigned	*pNumBytes	/* #Bytes to present to SK_RLMT_LOOKAHEAD */
+#endif	/* 0 */
+
+#define SK_RLMT_PRE_LOOKAHEAD(pAC,PortNum,PktLen,IsBc,pOffset,pNumBytes) { \
+	SK_AC	*_pAC; \
+	SK_U32	_PortNum; \
+	_pAC = (pAC); \
+	_PortNum = (SK_U32)(PortNum); \
+	/* _pAC->Rlmt.Port[_PortNum].PacketsRx++; */ \
+	_pAC->Rlmt.Port[_PortNum].PacketsPerTimeSlot++; \
+    if (_pAC->Rlmt.RlmtOff) { \
+		*(pNumBytes) = 0; \
+    } \
+    else {\
+        if ((_pAC->Rlmt.Port[_PortNum].Net->RlmtMode & SK_RLMT_TRANSPARENT) != 0) { \
+    		*(pNumBytes) = 0; \
+    	} \
+    	else if (IsBc) { \
+    		if (_pAC->Rlmt.Port[_PortNum].Net->RlmtMode != SK_RLMT_MODE_CLS) { \
+    			*(pNumBytes) = 6; \
+    			*(pOffset) = 6; \
+    		} \
+    		else { \
+    			*(pNumBytes) = 0; \
+    		} \
+    	} \
+    	else { \
+    		if ((PktLen) > SK_RLMT_MAX_TX_BUF_SIZE) { \
+    			/* _pAC->Rlmt.Port[_PortNum].DataPacketsPerTimeSlot++; */ \
+    			*(pNumBytes) = 0; \
+    		} \
+    		else { \
+    			*(pNumBytes) = 6; \
+    			*(pOffset) = 0; \
+    		} \
+    	} \
+    } \
+}
+
+#if 0
+SK_AC		*pAC		/* adapter context */
+SK_U32		PortNum		/* receiving port */
+SK_U8		*pLaPacket,	/* received packet's data (points to pOffset) */
+SK_BOOL		IsBc		/* Flag: packet is broadcast */
+SK_BOOL		IsMc		/* Flag: packet is multicast */
+unsigned	*pForRlmt	/* Result: bits SK_RLMT_RX_RLMT, SK_RLMT_RX_PROTOCOL */
+SK_RLMT_LOOKAHEAD() expects *pNumBytes from
+packet offset *pOffset (s.a.) at *pLaPacket.
+
+If you use SK_RLMT_LOOKAHEAD in a path where you already know if the packet is
+BC, MC, or UC, you should use constants for IsBc and IsMc, so that your compiler
+can trash unneeded parts of the if construction.
+#endif	/* 0 */
+
+#define SK_RLMT_LOOKAHEAD(pAC,PortNum,pLaPacket,IsBc,IsMc,pForRlmt) { \
+	SK_AC	*_pAC; \
+	SK_U32	_PortNum; \
+	SK_U8	*_pLaPacket; \
+	_pAC = (pAC); \
+	_PortNum = (SK_U32)(PortNum); \
+	_pLaPacket = (SK_U8 *)(pLaPacket); \
+	if (IsBc) {\
+		if (!SK_ADDR_EQUAL(_pLaPacket, _pAC->Addr.Net[_pAC->Rlmt.Port[ \
+			_PortNum].Net->NetNumber].CurrentMacAddress.a)) { \
+			_pAC->Rlmt.Port[_PortNum].BcTimeStamp = SkOsGetTime(_pAC); \
+			_pAC->Rlmt.CheckSwitch = SK_TRUE; \
+		} \
+		/* _pAC->Rlmt.Port[_PortNum].DataPacketsPerTimeSlot++; */ \
+		*(pForRlmt) = SK_RLMT_RX_PROTOCOL; \
+	} \
+	else if (IsMc) { \
+		if (SK_ADDR_EQUAL(_pLaPacket, BridgeMcAddr.a)) { \
+			_pAC->Rlmt.Port[_PortNum].BpduPacketsPerTimeSlot++; \
+			if (_pAC->Rlmt.Port[_PortNum].Net->RlmtMode & SK_RLMT_CHECK_SEG) { \
+				*(pForRlmt) = SK_RLMT_RX_RLMT | SK_RLMT_RX_PROTOCOL; \
+			} \
+			else { \
+				*(pForRlmt) = SK_RLMT_RX_PROTOCOL; \
+			} \
+		} \
+		else if (SK_ADDR_EQUAL(_pLaPacket, SkRlmtMcAddr.a)) { \
+			*(pForRlmt) = SK_RLMT_RX_RLMT; \
+		} \
+		else { \
+			/* _pAC->Rlmt.Port[_PortNum].DataPacketsPerTimeSlot++; */ \
+			*(pForRlmt) = SK_RLMT_RX_PROTOCOL; \
+		} \
+	} \
+	else { \
+		if (SK_ADDR_EQUAL( \
+			_pLaPacket, \
+			_pAC->Addr.Port[_PortNum].CurrentMacAddress.a)) { \
+			*(pForRlmt) = SK_RLMT_RX_RLMT; \
+		} \
+		else { \
+			/* _pAC->Rlmt.Port[_PortNum].DataPacketsPerTimeSlot++; */ \
+			*(pForRlmt) = SK_RLMT_RX_PROTOCOL; \
+		} \
+	} \
+}
+
+#ifdef SK_RLMT_FAST_LOOKAHEAD
+Error: SK_RLMT_FAST_LOOKAHEAD no longer used. Use new macros for lookahead.
+#endif	/* SK_RLMT_FAST_LOOKAHEAD */
+#ifdef SK_RLMT_SLOW_LOOKAHEAD
+Error: SK_RLMT_SLOW_LOOKAHEAD no longer used. Use new macros for lookahead.
+#endif	/* SK_RLMT_SLOW_LOOKAHEAD */
+
+/* typedefs *******************************************************************/
+
+#ifdef SK_RLMT_MBUF_PRIVATE
+typedef struct s_RlmtMbuf {
+	some content
+} SK_RLMT_MBUF;
+#endif	/* SK_RLMT_MBUF_PRIVATE */
+
+
+#ifdef SK_LA_INFO
+typedef struct s_Rlmt_PacketInfo {
+	unsigned	PacketLength;			/* Length of packet. */
+	unsigned	PacketType;				/* Directed/Multicast/Broadcast. */
+} SK_RLMT_PINFO;
+#endif	/* SK_LA_INFO */
+
+
+typedef struct s_RootId {
+	SK_U8		Id[8];					/* Root Bridge Id. */
+} SK_RLMT_ROOT_ID;
+
+
+typedef struct s_port {
+	SK_MAC_ADDR	CheckAddr;
+	SK_BOOL		SuspectTx;
+} SK_PORT_CHECK;
+
+
+typedef struct s_RlmtNet SK_RLMT_NET;
+
+
+typedef struct s_RlmtPort {
+
+/* ----- Public part (read-only) ----- */
+
+	SK_U8			PortState;				/* Current state of this port. */
+
+	/* For PNMI */
+	SK_BOOL			LinkDown;
+	SK_BOOL			PortDown;
+	SK_U8			Align01;
+
+	SK_U32			PortNumber;				/* Number of port on adapter. */
+	SK_RLMT_NET *	Net;					/* Net port belongs to. */
+
+	SK_U64			TxHelloCts;
+	SK_U64			RxHelloCts;
+	SK_U64			TxSpHelloReqCts;
+	SK_U64			RxSpHelloCts;
+
+/* ----- Private part ----- */
+
+/*	SK_U64			PacketsRx; */				/* Total packets received. */
+	SK_U32			PacketsPerTimeSlot;		/* Packets rxed between TOs. */
+/*	SK_U32			DataPacketsPerTimeSlot; */	/* Data packets ... */
+	SK_U32			BpduPacketsPerTimeSlot;	/* BPDU packets rxed in TS. */
+	SK_U64			BcTimeStamp;			/* Time of last BC receive. */
+	SK_U64			GuTimeStamp;			/* Time of entering GOING_UP. */
+
+	SK_TIMER		UpTimer;				/* Timer struct Link/Port up. */
+	SK_TIMER		DownRxTimer;			/* Timer struct down rx. */
+	SK_TIMER		DownTxTimer;			/* Timer struct down tx. */
+
+	SK_U32			CheckingState;			/* Checking State. */
+
+	SK_ADDR_PORT *	AddrPort;
+
+	SK_U8			Random[4];				/* Random value. */
+	unsigned		PortsChecked;			/* #ports checked. */
+	unsigned		PortsSuspect;			/* #ports checked that are s. */
+	SK_PORT_CHECK	PortCheck[1];
+/*	SK_PORT_CHECK	PortCheck[SK_MAX_MACS - 1]; */
+
+	SK_BOOL			PortStarted;			/* Port is started. */
+	SK_BOOL			PortNoRx;				/* NoRx for >= 1 time slot. */
+	SK_BOOL			RootIdSet;
+	SK_RLMT_ROOT_ID	Root;					/* Root Bridge Id. */
+} SK_RLMT_PORT;
+
+
+struct s_RlmtNet {
+
+/* ----- Public part (read-only) ----- */
+
+	SK_U32			NetNumber;			/* Number of net. */
+
+	SK_RLMT_PORT *	Port[SK_MAX_MACS];	/* Ports that belong to this net. */
+	SK_U32			NumPorts;			/* Number of ports. */
+	SK_U32			PrefPort;			/* Preferred port. */
+
+	/* For PNMI */
+
+	SK_U32			ChgBcPrio;			/* Change Priority of last broadcast received */
+	SK_U32			RlmtMode;			/* Check ... */
+	SK_U32			ActivePort;			/* Active port. */
+	SK_U32			Preference;		/* 0xFFFFFFFF: Automatic. */
+
+	SK_U8			RlmtState;			/* Current RLMT state. */
+
+/* ----- Private part ----- */
+	SK_BOOL			RootIdSet;
+	SK_U16			Align01;
+
+	int				LinksUp;			/* #Links up. */
+	int				PortsUp;			/* #Ports up. */
+	SK_U32			TimeoutValue;		/* RLMT timeout value. */
+
+	SK_U32			CheckingState;		/* Checking State. */
+	SK_RLMT_ROOT_ID	Root;				/* Root Bridge Id. */
+
+	SK_TIMER		LocTimer;			/* Timer struct. */
+	SK_TIMER		SegTimer;			/* Timer struct. */
+};
+
+
+typedef struct s_Rlmt {
+
+/* ----- Public part (read-only) ----- */
+
+	SK_U32			NumNets;			/* Number of nets. */
+	SK_U32			NetsStarted;		/* Number of nets started. */
+	SK_RLMT_NET		Net[SK_MAX_NETS];	/* Array of available nets. */
+	SK_RLMT_PORT	Port[SK_MAX_MACS];	/* Array of available ports. */
+
+/* ----- Private part ----- */
+	SK_BOOL			CheckSwitch;
+	SK_BOOL			RlmtOff;            /* set to zero if the Mac addresses 
+                                           are equal or the second one 
+                                           is zero */
+	SK_U16			Align01;
+
+} SK_RLMT;
+
+
+extern	SK_MAC_ADDR	BridgeMcAddr;
+extern	SK_MAC_ADDR	SkRlmtMcAddr;
+
+/* function prototypes ********************************************************/
+
+
+#ifndef SK_KR_PROTO
+
+/* Functions provided by SkRlmt */
+
+/* ANSI/C++ compliant function prototypes */
+
+extern	void	SkRlmtInit(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	int		Level);
+
+extern	int	SkRlmtEvent(
+	SK_AC		*pAC,
+	SK_IOC		IoC,
+	SK_U32		Event,
+	SK_EVPARA	Para);
+
+#else	/* defined(SK_KR_PROTO) */
+
+/* Non-ANSI/C++ compliant function prototypes */
+
+#error KR-style function prototypes are not yet provided.
+
+#endif	/* defined(SK_KR_PROTO)) */
+
+
+#ifdef __cplusplus
+}
+#endif	/* __cplusplus */
+
+#endif	/* __INC_SKRLMT_H */
diff --git a/drivers/net/sk98lin/h/sktimer.h b/drivers/net/sk98lin/h/sktimer.h
new file mode 100644
index 0000000..04e6d7c
--- /dev/null
+++ b/drivers/net/sk98lin/h/sktimer.h
@@ -0,0 +1,63 @@
+/******************************************************************************
+ *
+ * Name:	sktimer.h
+ * Project:	Gigabit Ethernet Adapters, Event Scheduler Module
+ * Version:	$Revision: 1.11 $
+ * Date:	$Date: 2003/09/16 12:58:18 $
+ * Purpose:	Defines for the timer functions
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *	(C)Copyright 1998-2002 SysKonnect GmbH.
+ *	(C)Copyright 2002-2003 Marvell.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/*
+ * SKTIMER.H	contains all defines and types for the timer functions
+ */
+
+#ifndef	_SKTIMER_H_
+#define _SKTIMER_H_
+
+#include "h/skqueue.h"
+
+/*
+ * SK timer
+ * - needed wherever a timer is used. Put this in your data structure
+ *   wherever you want.
+ */
+typedef	struct s_Timer SK_TIMER;
+
+struct s_Timer {
+	SK_TIMER	*TmNext;	/* linked list */
+	SK_U32		TmClass;	/* Timer Event class */
+	SK_U32		TmEvent;	/* Timer Event value */
+	SK_EVPARA	TmPara;		/* Timer Event parameter */
+	SK_U32		TmDelta;	/* delta time */
+	int			TmActive;	/* flag: active/inactive */
+};
+
+/*
+ * Timer control struct.
+ * - use in Adapters context name pAC->Tim
+ */
+typedef	struct s_TimCtrl {
+	SK_TIMER	*StQueue;	/* Head of Timer queue */
+} SK_TIMCTRL;
+
+extern void SkTimerInit(SK_AC *pAC, SK_IOC Ioc, int Level);
+extern void SkTimerStop(SK_AC *pAC, SK_IOC Ioc, SK_TIMER *pTimer);
+extern void SkTimerStart(SK_AC *pAC, SK_IOC Ioc, SK_TIMER *pTimer,
+	SK_U32 Time, SK_U32 Class, SK_U32 Event, SK_EVPARA Para);
+extern void SkTimerDone(SK_AC *pAC, SK_IOC Ioc);
+#endif	/* _SKTIMER_H_ */
diff --git a/drivers/net/sk98lin/h/sktypes.h b/drivers/net/sk98lin/h/sktypes.h
new file mode 100644
index 0000000..40edc96
--- /dev/null
+++ b/drivers/net/sk98lin/h/sktypes.h
@@ -0,0 +1,69 @@
+/******************************************************************************
+ *
+ * Name:	sktypes.h
+ * Project:	GEnesis, PCI Gigabit Ethernet Adapter
+ * Version:	$Revision: 1.2 $
+ * Date:	$Date: 2003/10/07 08:16:51 $
+ * Purpose:	Define data types for Linux
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *	(C)Copyright 1998-2002 SysKonnect GmbH.
+ *	(C)Copyright 2002-2003 Marvell.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+ 
+/******************************************************************************
+ *
+ * Description:
+ *
+ * In this file, all data types that are needed by the common modules
+ * are mapped to Linux data types.
+ * 
+ *
+ * Include File Hierarchy:
+ *
+ *
+ ******************************************************************************/
+
+#ifndef __INC_SKTYPES_H
+#define __INC_SKTYPES_H
+
+
+/* defines *******************************************************************/
+
+/*
+ * Data types with a specific size. 'I' = signed, 'U' = unsigned.
+ */
+#define SK_I8	s8
+#define SK_U8	u8
+#define SK_I16	s16
+#define SK_U16	u16
+#define SK_I32	s32
+#define SK_U32	u32
+#define SK_I64	s64
+#define SK_U64	u64
+
+#define SK_UPTR	ulong		/* casting pointer <-> integral */
+
+/*
+* Boolean type.
+*/
+#define SK_BOOL		SK_U8
+#define SK_FALSE	0
+#define SK_TRUE		(!SK_FALSE)
+
+/* typedefs *******************************************************************/
+
+/* function prototypes ********************************************************/
+
+#endif	/* __INC_SKTYPES_H */
diff --git a/drivers/net/sk98lin/h/skversion.h b/drivers/net/sk98lin/h/skversion.h
new file mode 100644
index 0000000..a1a7294
--- /dev/null
+++ b/drivers/net/sk98lin/h/skversion.h
@@ -0,0 +1,38 @@
+/******************************************************************************
+ *
+ * Name:	version.h
+ * Project:	GEnesis, PCI Gigabit Ethernet Adapter
+ * Version:	$Revision: 1.5 $
+ * Date:	$Date: 2003/10/07 08:16:51 $
+ * Purpose:	SK specific Error log support
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *	(C)Copyright 1998-2002 SysKonnect GmbH.
+ *	(C)Copyright 2002-2003 Marvell.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+#ifdef	lint
+static const char SysKonnectFileId[] = "@(#) (C) SysKonnect GmbH.";
+static const char SysKonnectBuildNumber[] =
+	"@(#)SK-BUILD: 6.23 PL: 01"; 
+#endif	/* !defined(lint) */
+
+#define BOOT_STRING	"sk98lin: Network Device Driver v6.23\n" \
+			"(C)Copyright 1999-2004 Marvell(R)."
+
+#define VER_STRING	"6.23"
+#define DRIVER_FILE_NAME	"sk98lin"
+#define DRIVER_REL_DATE		"Feb-13-2004"
+
+
diff --git a/drivers/net/sk98lin/h/skvpd.h b/drivers/net/sk98lin/h/skvpd.h
new file mode 100644
index 0000000..fdd9e48
--- /dev/null
+++ b/drivers/net/sk98lin/h/skvpd.h
@@ -0,0 +1,248 @@
+/******************************************************************************
+ *
+ * Name:	skvpd.h
+ * Project:	GEnesis, PCI Gigabit Ethernet Adapter
+ * Version:	$Revision: 1.15 $
+ * Date:	$Date: 2003/01/13 10:39:38 $
+ * Purpose:	Defines and Macros for VPD handling
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *	(C)Copyright 1998-2003 SysKonnect GmbH.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/*
+ * skvpd.h	contains Diagnostic specific defines for VPD handling
+ */
+
+#ifndef __INC_SKVPD_H_
+#define __INC_SKVPD_H_
+
+/*
+ * Define Resource Type Identifiers and VPD keywords
+ */
+#define	RES_ID		0x82	/* Resource Type ID String (Product Name) */
+#define RES_VPD_R	0x90	/* start of VPD read only area */
+#define RES_VPD_W	0x91	/* start of VPD read/write area */
+#define RES_END		0x78	/* Resource Type End Tag */
+
+#ifndef VPD_NAME
+#define VPD_NAME	"Name"	/* Product Name, VPD name of RES_ID */
+#endif	/* VPD_NAME */
+#define VPD_PN		"PN"	/* Adapter Part Number */
+#define	VPD_EC		"EC"	/* Adapter Engineering Level */
+#define VPD_MN		"MN"	/* Manufacture ID */
+#define VPD_SN		"SN"	/* Serial Number */
+#define VPD_CP		"CP"	/* Extended Capability */
+#define VPD_RV		"RV"	/* Checksum and Reserved */
+#define	VPD_YA		"YA"	/* Asset Tag Identifier */
+#define VPD_VL		"VL"	/* First Error Log Message (SK specific) */
+#define VPD_VF		"VF"	/* Second Error Log Message (SK specific) */
+#define VPD_RW		"RW"	/* Remaining Read / Write Area */
+
+/* 'type' values for vpd_setup_para() */
+#define VPD_RO_KEY	1	/* RO keys are "PN", "EC", "MN", "SN", "RV" */
+#define VPD_RW_KEY	2	/* RW keys are "Yx", "Vx", and "RW" */
+
+/* 'op' values for vpd_setup_para() */
+#define	ADD_KEY		1	/* add the key at the pos "RV" or "RW" */
+#define OWR_KEY		2	/* overwrite key if already exists */
+
+/*
+ * Define READ and WRITE Constants.
+ */
+
+#define VPD_DEV_ID_GENESIS 	0x4300
+
+#define	VPD_SIZE_YUKON		256
+#define	VPD_SIZE_GENESIS	512
+#define	VPD_SIZE			512
+#define VPD_READ	0x0000
+#define VPD_WRITE	0x8000
+
+#define VPD_STOP(pAC,IoC)	VPD_OUT16(pAC,IoC,PCI_VPD_ADR_REG,VPD_WRITE)
+
+#define VPD_GET_RES_LEN(p)	((unsigned int) \
+					(* (SK_U8 *)&(p)[1]) |\
+					((* (SK_U8 *)&(p)[2]) << 8))
+#define VPD_GET_VPD_LEN(p)	((unsigned int)(* (SK_U8 *)&(p)[2]))
+#define VPD_GET_VAL(p)		((char *)&(p)[3])
+
+#define VPD_MAX_LEN	50
+
+/* VPD status */
+	/* bit 7..1 reserved */
+#define VPD_VALID	(1<<0)	/* VPD data buffer, vpd_free_ro, */
+							/* and vpd_free_rw valid	 */
+
+/*
+ * VPD structs
+ */
+typedef	struct s_vpd_status {
+	unsigned short	Align01;			/* Alignment */
+	unsigned short	vpd_status;			/* VPD status, description see above */
+	int				vpd_free_ro;		/* unused bytes in read only area */
+	int				vpd_free_rw;		/* bytes available in read/write area */
+} SK_VPD_STATUS;
+
+typedef	struct s_vpd {
+	SK_VPD_STATUS	v;					/* VPD status structure */
+	char			vpd_buf[VPD_SIZE];	/* VPD buffer */
+	int				rom_size;			/* VPD ROM Size from PCI_OUR_REG_2 */
+	int				vpd_size;			/* saved VPD-size */
+} SK_VPD;
+
+typedef	struct s_vpd_para {
+	unsigned int	p_len;	/* parameter length */
+	char			*p_val;	/* points to the value */
+} SK_VPD_PARA;
+
+/*
+ * structure of Large Resource Type Identifiers
+ */
+
+/* was removed because of alignment problems */
+
+/*
+ * structure of VPD keywords
+ */
+typedef	struct s_vpd_key {
+	char			p_key[2];	/* 2 bytes ID string */
+	unsigned char	p_len;		/* 1 byte length */
+	char			p_val;		/* start of the value string */
+} SK_VPD_KEY;
+
+
+/*
+ * System specific VPD macros
+ */
+#ifndef SKDIAG
+#ifndef VPD_DO_IO
+#define VPD_OUT8(pAC,IoC,Addr,Val)	(void)SkPciWriteCfgByte(pAC,Addr,Val)
+#define VPD_OUT16(pAC,IoC,Addr,Val)	(void)SkPciWriteCfgWord(pAC,Addr,Val)
+#define VPD_IN8(pAC,IoC,Addr,pVal)	(void)SkPciReadCfgByte(pAC,Addr,pVal)
+#define VPD_IN16(pAC,IoC,Addr,pVal)	(void)SkPciReadCfgWord(pAC,Addr,pVal)
+#define VPD_IN32(pAC,IoC,Addr,pVal)	(void)SkPciReadCfgDWord(pAC,Addr,pVal)
+#else	/* VPD_DO_IO */
+#define VPD_OUT8(pAC,IoC,Addr,Val)	SK_OUT8(IoC,PCI_C(Addr),Val)
+#define VPD_OUT16(pAC,IoC,Addr,Val)	SK_OUT16(IoC,PCI_C(Addr),Val)
+#define VPD_IN8(pAC,IoC,Addr,pVal)	SK_IN8(IoC,PCI_C(Addr),pVal)
+#define VPD_IN16(pAC,IoC,Addr,pVal)	SK_IN16(IoC,PCI_C(Addr),pVal)
+#define VPD_IN32(pAC,IoC,Addr,pVal)	SK_IN32(IoC,PCI_C(Addr),pVal)
+#endif	/* VPD_DO_IO */
+#else	/* SKDIAG */
+#define VPD_OUT8(pAC,Ioc,Addr,Val) {			\
+		if ((pAC)->DgT.DgUseCfgCycle)			\
+			SkPciWriteCfgByte(pAC,Addr,Val);	\
+		else									\
+			SK_OUT8(pAC,PCI_C(Addr),Val);		\
+		}
+#define VPD_OUT16(pAC,Ioc,Addr,Val) {			\
+		if ((pAC)->DgT.DgUseCfgCycle)			\
+			SkPciWriteCfgWord(pAC,Addr,Val);	\
+		else						\
+			SK_OUT16(pAC,PCI_C(Addr),Val);		\
+		}
+#define VPD_IN8(pAC,Ioc,Addr,pVal) {			\
+		if ((pAC)->DgT.DgUseCfgCycle) 			\
+			SkPciReadCfgByte(pAC,Addr,pVal);	\
+		else						\
+			SK_IN8(pAC,PCI_C(Addr),pVal); 		\
+		}
+#define VPD_IN16(pAC,Ioc,Addr,pVal) {			\
+		if ((pAC)->DgT.DgUseCfgCycle) 			\
+			SkPciReadCfgWord(pAC,Addr,pVal);	\
+		else						\
+			SK_IN16(pAC,PCI_C(Addr),pVal); 		\
+		}
+#define VPD_IN32(pAC,Ioc,Addr,pVal) {			\
+		if ((pAC)->DgT.DgUseCfgCycle)			\
+			SkPciReadCfgDWord(pAC,Addr,pVal);	\
+		else						\
+			SK_IN32(pAC,PCI_C(Addr),pVal);		\
+		}
+#endif	/* nSKDIAG */
+
+/* function prototypes ********************************************************/
+
+#ifndef	SK_KR_PROTO
+#ifdef SKDIAG
+extern SK_U32	VpdReadDWord(
+	SK_AC		*pAC,
+	SK_IOC		IoC,
+	int			addr);
+#endif	/* SKDIAG */
+
+extern SK_VPD_STATUS	*VpdStat(
+	SK_AC		*pAC,
+	SK_IOC		IoC);
+
+extern int	VpdKeys(
+	SK_AC		*pAC,
+	SK_IOC		IoC,
+	char		*buf,
+	int			*len,
+	int			*elements);
+
+extern int	VpdRead(
+	SK_AC		*pAC,
+	SK_IOC		IoC,
+	const char	*key,
+	char		*buf,
+	int			*len);
+
+extern SK_BOOL	VpdMayWrite(
+	char		*key);
+
+extern int	VpdWrite(
+	SK_AC		*pAC,
+	SK_IOC		IoC,
+	const char	*key,
+	const char	*buf);
+
+extern int	VpdDelete(
+	SK_AC		*pAC,
+	SK_IOC		IoC,
+	char		*key);
+
+extern int	VpdUpdate(
+	SK_AC		*pAC,
+	SK_IOC		IoC);
+
+#ifdef	SKDIAG
+extern int	VpdReadBlock(
+	SK_AC		*pAC,
+	SK_IOC		IoC,
+	char		*buf,
+	int			addr,
+	int			len);
+
+extern int	VpdWriteBlock(
+	SK_AC		*pAC,
+	SK_IOC		IoC,
+	char		*buf,
+	int			addr,
+	int			len);
+#endif	/* SKDIAG */
+#else	/* SK_KR_PROTO */
+extern SK_U32	VpdReadDWord();
+extern SK_VPD_STATUS	*VpdStat();
+extern int	VpdKeys();
+extern int	VpdRead();
+extern SK_BOOL	VpdMayWrite();
+extern int	VpdWrite();
+extern int	VpdDelete();
+extern int	VpdUpdate();
+#endif	/* SK_KR_PROTO */
+
+#endif	/* __INC_SKVPD_H_ */
diff --git a/drivers/net/sk98lin/h/xmac_ii.h b/drivers/net/sk98lin/h/xmac_ii.h
new file mode 100644
index 0000000..7f8e6d0
--- /dev/null
+++ b/drivers/net/sk98lin/h/xmac_ii.h
@@ -0,0 +1,1579 @@
+/******************************************************************************
+ *
+ * Name:	xmac_ii.h
+ * Project:	Gigabit Ethernet Adapters, Common Modules
+ * Version:	$Revision: 1.52 $
+ * Date:	$Date: 2003/10/02 16:35:50 $
+ * Purpose:	Defines and Macros for Gigabit Ethernet Controller
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *	(C)Copyright 1998-2002 SysKonnect.
+ *	(C)Copyright 2002-2003 Marvell.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+#ifndef __INC_XMAC_H
+#define __INC_XMAC_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif	/* __cplusplus */
+
+/* defines ********************************************************************/
+
+/*
+ * XMAC II registers
+ *
+ * The XMAC registers are 16 or 32 bits wide.
+ * The XMACs host processor interface is set to 16 bit mode,
+ * therefore ALL registers will be addressed with 16 bit accesses.
+ *
+ * The following macros are provided to access the XMAC registers
+ * XM_IN16(), XM_OUT16, XM_IN32(), XM_OUT32(), XM_INADR(), XM_OUTADR(),
+ * XM_INHASH(), and XM_OUTHASH().
+ * The macros are defined in SkGeHw.h.
+ *
+ * Note:	NA reg	= Network Address e.g DA, SA etc.
+ *
+ */
+#define XM_MMU_CMD		0x0000	/* 16 bit r/w	MMU Command Register */
+	/* 0x0004:		reserved */
+#define XM_POFF			0x0008	/* 32 bit r/w	Packet Offset Register */
+#define XM_BURST		0x000c	/* 32 bit r/w	Burst Register for half duplex*/
+#define XM_1L_VLAN_TAG	0x0010	/* 16 bit r/w	One Level VLAN Tag ID */
+#define XM_2L_VLAN_TAG	0x0014	/* 16 bit r/w	Two Level VLAN Tag ID */
+	/* 0x0018 - 0x001e:	reserved */
+#define XM_TX_CMD		0x0020	/* 16 bit r/w	Transmit Command Register */
+#define XM_TX_RT_LIM	0x0024	/* 16 bit r/w	Transmit Retry Limit Register */
+#define XM_TX_STIME		0x0028	/* 16 bit r/w	Transmit Slottime Register */
+#define XM_TX_IPG		0x002c	/* 16 bit r/w	Transmit Inter Packet Gap */
+#define XM_RX_CMD		0x0030	/* 16 bit r/w	Receive Command Register */
+#define XM_PHY_ADDR		0x0034	/* 16 bit r/w	PHY Address Register */
+#define XM_PHY_DATA		0x0038	/* 16 bit r/w	PHY Data Register */
+	/* 0x003c: 		reserved */
+#define XM_GP_PORT		0x0040	/* 32 bit r/w	General Purpose Port Register */
+#define XM_IMSK			0x0044	/* 16 bit r/w	Interrupt Mask Register */
+#define XM_ISRC			0x0048	/* 16 bit r/o	Interrupt Status Register */
+#define XM_HW_CFG		0x004c	/* 16 bit r/w	Hardware Config Register */
+	/* 0x0050 - 0x005e:	reserved */
+#define XM_TX_LO_WM		0x0060	/* 16 bit r/w	Tx FIFO Low Water Mark */
+#define XM_TX_HI_WM		0x0062	/* 16 bit r/w	Tx FIFO High Water Mark */
+#define XM_TX_THR		0x0064	/* 16 bit r/w	Tx Request Threshold */
+#define XM_HT_THR		0x0066	/* 16 bit r/w	Host Request Threshold */
+#define XM_PAUSE_DA		0x0068	/* NA reg r/w	Pause Destination Address */
+	/* 0x006e: 		reserved */
+#define XM_CTL_PARA		0x0070	/* 32 bit r/w	Control Parameter Register */
+#define XM_MAC_OPCODE	0x0074	/* 16 bit r/w	Opcode for MAC control frames */
+#define XM_MAC_PTIME	0x0076	/* 16 bit r/w	Pause time for MAC ctrl frames*/
+#define XM_TX_STAT		0x0078	/* 32 bit r/o	Tx Status LIFO Register */
+
+	/* 0x0080 - 0x00fc:	16 NA reg r/w	Exact Match Address Registers */
+	/* 				use the XM_EXM() macro to address */
+#define XM_EXM_START	0x0080	/* r/w	Start Address of the EXM Regs */
+
+	/*
+	 * XM_EXM(Reg)
+	 *
+	 * returns the XMAC address offset of specified Exact Match Addr Reg
+	 *
+	 * para:	Reg	EXM register to addr	(0 .. 15)
+	 *
+	 * usage:	XM_INADDR(IoC, MAC_1, XM_EXM(i), &val[i]);
+	 */
+#define XM_EXM(Reg)	(XM_EXM_START + ((Reg) << 3))
+
+#define XM_SRC_CHK		0x0100	/* NA reg r/w	Source Check Address Register */
+#define XM_SA			0x0108	/* NA reg r/w	Station Address Register */
+#define XM_HSM			0x0110	/* 64 bit r/w	Hash Match Address Registers */
+#define XM_RX_LO_WM		0x0118	/* 16 bit r/w	Receive Low Water Mark */
+#define XM_RX_HI_WM		0x011a	/* 16 bit r/w	Receive High Water Mark */
+#define XM_RX_THR		0x011c	/* 32 bit r/w	Receive Request Threshold */
+#define XM_DEV_ID		0x0120	/* 32 bit r/o	Device ID Register */
+#define XM_MODE			0x0124	/* 32 bit r/w	Mode Register */
+#define XM_LSA			0x0128	/* NA reg r/o	Last Source Register */
+	/* 0x012e:		reserved */
+#define XM_TS_READ		0x0130	/* 32 bit r/o	Time Stamp Read Register */
+#define XM_TS_LOAD		0x0134	/* 32 bit r/o	Time Stamp Load Value */
+	/* 0x0138 - 0x01fe:	reserved */
+#define XM_STAT_CMD	0x0200	/* 16 bit r/w	Statistics Command Register */
+#define XM_RX_CNT_EV	0x0204	/* 32 bit r/o	Rx Counter Event Register */
+#define XM_TX_CNT_EV	0x0208	/* 32 bit r/o	Tx Counter Event Register */
+#define XM_RX_EV_MSK	0x020c	/* 32 bit r/w	Rx Counter Event Mask */
+#define XM_TX_EV_MSK	0x0210	/* 32 bit r/w	Tx Counter Event Mask */
+	/* 0x0204 - 0x027e:	reserved */
+#define XM_TXF_OK		0x0280	/* 32 bit r/o	Frames Transmitted OK Conuter */
+#define XM_TXO_OK_HI	0x0284	/* 32 bit r/o	Octets Transmitted OK High Cnt*/
+#define XM_TXO_OK_LO	0x0288	/* 32 bit r/o	Octets Transmitted OK Low Cnt */
+#define XM_TXF_BC_OK	0x028c	/* 32 bit r/o	Broadcast Frames Xmitted OK */
+#define XM_TXF_MC_OK	0x0290	/* 32 bit r/o	Multicast Frames Xmitted OK */
+#define XM_TXF_UC_OK	0x0294	/* 32 bit r/o	Unicast Frames Xmitted OK */
+#define XM_TXF_LONG		0x0298	/* 32 bit r/o	Tx Long Frame Counter */
+#define XM_TXE_BURST	0x029c	/* 32 bit r/o	Tx Burst Event Counter */
+#define XM_TXF_MPAUSE	0x02a0	/* 32 bit r/o	Tx Pause MAC Ctrl Frame Cnt */
+#define XM_TXF_MCTRL	0x02a4	/* 32 bit r/o	Tx MAC Ctrl Frame Counter */
+#define XM_TXF_SNG_COL	0x02a8	/* 32 bit r/o	Tx Single Collision Counter */
+#define XM_TXF_MUL_COL	0x02ac	/* 32 bit r/o	Tx Multiple Collision Counter */
+#define XM_TXF_ABO_COL	0x02b0	/* 32 bit r/o	Tx aborted due to Exces. Col. */
+#define XM_TXF_LAT_COL	0x02b4	/* 32 bit r/o	Tx Late Collision Counter */
+#define XM_TXF_DEF		0x02b8	/* 32 bit r/o	Tx Deferred Frame Counter */
+#define XM_TXF_EX_DEF	0x02bc	/* 32 bit r/o	Tx Excessive Deferall Counter */
+#define XM_TXE_FIFO_UR	0x02c0	/* 32 bit r/o	Tx FIFO Underrun Event Cnt */
+#define XM_TXE_CS_ERR	0x02c4	/* 32 bit r/o	Tx Carrier Sense Error Cnt */
+#define XM_TXP_UTIL		0x02c8	/* 32 bit r/o	Tx Utilization in % */
+	/* 0x02cc - 0x02ce:	reserved */
+#define XM_TXF_64B		0x02d0	/* 32 bit r/o	64 Byte Tx Frame Counter */
+#define XM_TXF_127B		0x02d4	/* 32 bit r/o	65-127 Byte Tx Frame Counter */
+#define XM_TXF_255B		0x02d8	/* 32 bit r/o	128-255 Byte Tx Frame Counter */
+#define XM_TXF_511B		0x02dc	/* 32 bit r/o	256-511 Byte Tx Frame Counter */
+#define XM_TXF_1023B	0x02e0	/* 32 bit r/o	512-1023 Byte Tx Frame Counter*/
+#define XM_TXF_MAX_SZ	0x02e4	/* 32 bit r/o	1024-MaxSize Byte Tx Frame Cnt*/
+	/* 0x02e8 - 0x02fe:	reserved */
+#define XM_RXF_OK		0x0300	/* 32 bit r/o	Frames Received OK */
+#define XM_RXO_OK_HI	0x0304	/* 32 bit r/o	Octets Received OK High Cnt */
+#define XM_RXO_OK_LO	0x0308	/* 32 bit r/o	Octets Received OK Low Counter*/
+#define XM_RXF_BC_OK	0x030c	/* 32 bit r/o	Broadcast Frames Received OK */
+#define XM_RXF_MC_OK	0x0310	/* 32 bit r/o	Multicast Frames Received OK */
+#define XM_RXF_UC_OK	0x0314	/* 32 bit r/o	Unicast Frames Received OK */
+#define XM_RXF_MPAUSE	0x0318	/* 32 bit r/o	Rx Pause MAC Ctrl Frame Cnt */
+#define XM_RXF_MCTRL	0x031c	/* 32 bit r/o	Rx MAC Ctrl Frame Counter */
+#define XM_RXF_INV_MP	0x0320	/* 32 bit r/o	Rx invalid Pause Frame Cnt */
+#define XM_RXF_INV_MOC	0x0324	/* 32 bit r/o	Rx Frames with inv. MAC Opcode*/
+#define XM_RXE_BURST	0x0328	/* 32 bit r/o	Rx Burst Event Counter */
+#define XM_RXE_FMISS	0x032c	/* 32 bit r/o	Rx Missed Frames Event Cnt */
+#define XM_RXF_FRA_ERR	0x0330	/* 32 bit r/o	Rx Framing Error Counter */
+#define XM_RXE_FIFO_OV	0x0334	/* 32 bit r/o	Rx FIFO overflow Event Cnt */
+#define XM_RXF_JAB_PKT	0x0338	/* 32 bit r/o	Rx Jabber Packet Frame Cnt */
+#define XM_RXE_CAR_ERR	0x033c	/* 32 bit r/o	Rx Carrier Event Error Cnt */
+#define XM_RXF_LEN_ERR	0x0340	/* 32 bit r/o	Rx in Range Length Error */
+#define XM_RXE_SYM_ERR	0x0344	/* 32 bit r/o	Rx Symbol Error Counter */
+#define XM_RXE_SHT_ERR	0x0348	/* 32 bit r/o	Rx Short Event Error Cnt */
+#define XM_RXE_RUNT		0x034c	/* 32 bit r/o	Rx Runt Event Counter */
+#define XM_RXF_LNG_ERR	0x0350	/* 32 bit r/o	Rx Frame too Long Error Cnt */
+#define XM_RXF_FCS_ERR	0x0354	/* 32 bit r/o	Rx Frame Check Seq. Error Cnt */
+	/* 0x0358 - 0x035a:	reserved */
+#define XM_RXF_CEX_ERR	0x035c	/* 32 bit r/o	Rx Carrier Ext Error Frame Cnt*/
+#define XM_RXP_UTIL		0x0360	/* 32 bit r/o	Rx Utilization in % */
+	/* 0x0364 - 0x0366:	reserved */
+#define XM_RXF_64B		0x0368	/* 32 bit r/o	64 Byte Rx Frame Counter */
+#define XM_RXF_127B		0x036c	/* 32 bit r/o	65-127 Byte Rx Frame Counter */
+#define XM_RXF_255B		0x0370	/* 32 bit r/o	128-255 Byte Rx Frame Counter */
+#define XM_RXF_511B		0x0374	/* 32 bit r/o	256-511 Byte Rx Frame Counter */
+#define XM_RXF_1023B	0x0378	/* 32 bit r/o	512-1023 Byte Rx Frame Counter*/
+#define XM_RXF_MAX_SZ	0x037c	/* 32 bit r/o	1024-MaxSize Byte Rx Frame Cnt*/
+	/* 0x02e8 - 0x02fe:	reserved */
+
+
+/*----------------------------------------------------------------------------*/
+/*
+ * XMAC Bit Definitions
+ *
+ * If the bit access behaviour differs from the register access behaviour
+ * (r/w, r/o) this is documented after the bit number.
+ * The following bit access behaviours are used:
+ *	(sc)	self clearing
+ *	(ro)	read only
+ */
+
+/*	XM_MMU_CMD	16 bit r/w	MMU Command Register */
+								/* Bit 15..13:	reserved */
+#define XM_MMU_PHY_RDY	(1<<12)	/* Bit 12:	PHY Read Ready */
+#define XM_MMU_PHY_BUSY	(1<<11)	/* Bit 11:	PHY Busy */
+#define XM_MMU_IGN_PF	(1<<10)	/* Bit 10:	Ignore Pause Frame */
+#define XM_MMU_MAC_LB	(1<<9)	/* Bit  9:	Enable MAC Loopback */
+								/* Bit  8:	reserved */
+#define XM_MMU_FRC_COL	(1<<7)	/* Bit  7:	Force Collision */
+#define XM_MMU_SIM_COL	(1<<6)	/* Bit  6:	Simulate Collision */
+#define XM_MMU_NO_PRE	(1<<5)	/* Bit  5:	No MDIO Preamble */
+#define XM_MMU_GMII_FD	(1<<4)	/* Bit  4:	GMII uses Full Duplex */
+#define XM_MMU_RAT_CTRL	(1<<3)	/* Bit  3:	Enable Rate Control */
+#define XM_MMU_GMII_LOOP (1<<2)	/* Bit  2:	PHY is in Loopback Mode */
+#define XM_MMU_ENA_RX	(1<<1)	/* Bit  1:	Enable Receiver */
+#define XM_MMU_ENA_TX	(1<<0)	/* Bit  0:	Enable Transmitter */
+
+
+/*	XM_TX_CMD	16 bit r/w	Transmit Command Register */
+								/* Bit 15..7:	reserved */
+#define XM_TX_BK2BK		(1<<6)	/* Bit  6:	Ignor Carrier Sense (Tx Bk2Bk)*/
+#define XM_TX_ENC_BYP	(1<<5)	/* Bit  5:	Set Encoder in Bypass Mode */
+#define XM_TX_SAM_LINE	(1<<4)	/* Bit  4: (sc)	Start utilization calculation */
+#define XM_TX_NO_GIG_MD	(1<<3)	/* Bit  3:	Disable Carrier Extension */
+#define XM_TX_NO_PRE	(1<<2)	/* Bit  2:	Disable Preamble Generation */
+#define XM_TX_NO_CRC	(1<<1)	/* Bit  1:	Disable CRC Generation */
+#define XM_TX_AUTO_PAD	(1<<0)	/* Bit  0:	Enable Automatic Padding */
+
+
+/*	XM_TX_RT_LIM	16 bit r/w	Transmit Retry Limit Register */
+								/* Bit 15..5:	reserved */
+#define XM_RT_LIM_MSK	0x1f	/* Bit  4..0:	Tx Retry Limit */
+
+
+/*	XM_TX_STIME	16 bit r/w	Transmit Slottime Register */
+								/* Bit 15..7:	reserved */
+#define XM_STIME_MSK	0x7f	/* Bit  6..0:	Tx Slottime bits */
+
+
+/*	XM_TX_IPG	16 bit r/w	Transmit Inter Packet Gap */
+								/* Bit 15..8:	reserved */
+#define XM_IPG_MSK		0xff	/* Bit  7..0:	IPG value bits */
+
+
+/*	XM_RX_CMD	16 bit r/w	Receive Command Register */
+								/* Bit 15..9:	reserved */
+#define XM_RX_LENERR_OK (1<<8)	/* Bit  8	don't set Rx Err bit for */
+								/*		inrange error packets */
+#define XM_RX_BIG_PK_OK	(1<<7)	/* Bit  7	don't set Rx Err bit for */
+								/*		jumbo packets */
+#define XM_RX_IPG_CAP	(1<<6)	/* Bit  6	repl. type field with IPG */
+#define XM_RX_TP_MD		(1<<5)	/* Bit  5:	Enable transparent Mode */
+#define XM_RX_STRIP_FCS	(1<<4)	/* Bit  4:	Enable FCS Stripping */
+#define XM_RX_SELF_RX	(1<<3)	/* Bit  3: 	Enable Rx of own packets */
+#define XM_RX_SAM_LINE	(1<<2)	/* Bit  2: (sc)	Start utilization calculation */
+#define XM_RX_STRIP_PAD	(1<<1)	/* Bit  1:	Strip pad bytes of Rx frames */
+#define XM_RX_DIS_CEXT	(1<<0)	/* Bit  0:	Disable carrier ext. check */
+
+
+/*	XM_PHY_ADDR	16 bit r/w	PHY Address Register */
+								/* Bit 15..5:	reserved */
+#define XM_PHY_ADDR_SZ	0x1f	/* Bit  4..0:	PHY Address bits */
+
+
+/*	XM_GP_PORT	32 bit r/w	General Purpose Port Register */
+								/* Bit 31..7:	reserved */
+#define XM_GP_ANIP		(1L<<6)	/* Bit  6: (ro)	Auto-Neg. in progress */
+#define XM_GP_FRC_INT	(1L<<5)	/* Bit  5: (sc)	Force Interrupt */
+								/* Bit  4:	reserved */
+#define XM_GP_RES_MAC	(1L<<3)	/* Bit  3: (sc)	Reset MAC and FIFOs */
+#define XM_GP_RES_STAT	(1L<<2)	/* Bit  2: (sc)	Reset the statistics module */
+								/* Bit  1:	reserved */
+#define XM_GP_INP_ASS	(1L<<0)	/* Bit  0: (ro) GP Input Pin asserted */
+
+
+/*	XM_IMSK		16 bit r/w	Interrupt Mask Register */
+/*	XM_ISRC		16 bit r/o	Interrupt Status Register */
+								/* Bit 15:	reserved */
+#define XM_IS_LNK_AE	(1<<14) /* Bit 14:	Link Asynchronous Event */
+#define XM_IS_TX_ABORT	(1<<13) /* Bit 13:	Transmit Abort, late Col. etc */
+#define XM_IS_FRC_INT	(1<<12) /* Bit 12:	Force INT bit set in GP */
+#define XM_IS_INP_ASS	(1<<11)	/* Bit 11:	Input Asserted, GP bit 0 set */
+#define XM_IS_LIPA_RC	(1<<10)	/* Bit 10:	Link Partner requests config */
+#define XM_IS_RX_PAGE	(1<<9)	/* Bit  9:	Page Received */
+#define XM_IS_TX_PAGE	(1<<8)	/* Bit  8:	Next Page Loaded for Transmit */
+#define XM_IS_AND		(1<<7)	/* Bit  7:	Auto-Negotiation Done */
+#define XM_IS_TSC_OV	(1<<6)	/* Bit  6:	Time Stamp Counter Overflow */
+#define XM_IS_RXC_OV	(1<<5)	/* Bit  5:	Rx Counter Event Overflow */
+#define XM_IS_TXC_OV	(1<<4)	/* Bit  4:	Tx Counter Event Overflow */
+#define XM_IS_RXF_OV	(1<<3)	/* Bit  3:	Receive FIFO Overflow */
+#define XM_IS_TXF_UR	(1<<2)	/* Bit  2:	Transmit FIFO Underrun */
+#define XM_IS_TX_COMP	(1<<1)	/* Bit  1:	Frame Tx Complete */
+#define XM_IS_RX_COMP	(1<<0)	/* Bit  0:	Frame Rx Complete */
+
+#define XM_DEF_MSK	(~(XM_IS_INP_ASS | XM_IS_LIPA_RC | XM_IS_RX_PAGE |\
+			XM_IS_AND | XM_IS_RXC_OV | XM_IS_TXC_OV | XM_IS_TXF_UR))
+
+
+/*	XM_HW_CFG	16 bit r/w	Hardware Config Register */
+								/* Bit 15.. 4:	reserved */
+#define XM_HW_GEN_EOP	(1<<3)	/* Bit  3:	generate End of Packet pulse */
+#define XM_HW_COM4SIG	(1<<2)	/* Bit  2:	use Comma Detect for Sig. Det.*/
+								/* Bit  1:	reserved */
+#define XM_HW_GMII_MD	(1<<0)	/* Bit  0:	GMII Interface selected */
+
+
+/*	XM_TX_LO_WM	16 bit r/w	Tx FIFO Low Water Mark */
+/*	XM_TX_HI_WM	16 bit r/w	Tx FIFO High Water Mark */
+								/* Bit 15..10	reserved */
+#define XM_TX_WM_MSK	0x01ff	/* Bit  9.. 0	Tx FIFO Watermark bits */
+
+/*	XM_TX_THR	16 bit r/w	Tx Request Threshold */
+/*	XM_HT_THR	16 bit r/w	Host Request Threshold */
+/*	XM_RX_THR	16 bit r/w	Rx Request Threshold */
+								/* Bit 15..11	reserved */
+#define XM_THR_MSK		0x03ff	/* Bit 10.. 0	Rx/Tx Request Threshold bits */
+
+
+/*	XM_TX_STAT	32 bit r/o	Tx Status LIFO Register */
+#define XM_ST_VALID		(1UL<<31)	/* Bit 31:	Status Valid */
+#define XM_ST_BYTE_CNT	(0x3fffL<<17)	/* Bit 30..17:	Tx frame Length */
+#define XM_ST_RETRY_CNT	(0x1fL<<12)	/* Bit 16..12:	Retry Count */
+#define XM_ST_EX_COL	(1L<<11)	/* Bit 11:	Excessive Collisions */
+#define XM_ST_EX_DEF	(1L<<10)	/* Bit 10:	Excessive Deferral */
+#define XM_ST_BURST		(1L<<9)		/* Bit  9:	p. xmitted in burst md*/
+#define XM_ST_DEFER		(1L<<8)		/* Bit  8:	packet was defered */
+#define XM_ST_BC		(1L<<7)		/* Bit  7:	Broadcast packet */
+#define XM_ST_MC		(1L<<6)		/* Bit  6:	Multicast packet */
+#define XM_ST_UC		(1L<<5)		/* Bit  5:	Unicast packet */
+#define XM_ST_TX_UR		(1L<<4)		/* Bit  4:	FIFO Underrun occured */
+#define XM_ST_CS_ERR	(1L<<3)		/* Bit  3:	Carrier Sense Error */
+#define XM_ST_LAT_COL	(1L<<2)		/* Bit  2:	Late Collision Error */
+#define XM_ST_MUL_COL	(1L<<1)		/* Bit  1:	Multiple Collisions */
+#define XM_ST_SGN_COL	(1L<<0)		/* Bit  0:	Single Collision */
+
+/*	XM_RX_LO_WM	16 bit r/w	Receive Low Water Mark */
+/*	XM_RX_HI_WM	16 bit r/w	Receive High Water Mark */
+									/* Bit 15..11:	reserved */
+#define XM_RX_WM_MSK	0x03ff		/* Bit 11.. 0:	Rx FIFO Watermark bits */
+
+
+/*	XM_DEV_ID	32 bit r/o	Device ID Register */
+#define XM_DEV_OUI	(0x00ffffffUL<<8)	/* Bit 31..8:	Device OUI */
+#define XM_DEV_REV	(0x07L << 5)		/* Bit  7..5:	Chip Rev Num */
+
+
+/*	XM_MODE		32 bit r/w	Mode Register */
+									/* Bit 31..27:	reserved */
+#define XM_MD_ENA_REJ	(1L<<26)	/* Bit 26:	Enable Frame Reject */
+#define XM_MD_SPOE_E	(1L<<25)	/* Bit 25:	Send Pause on Edge */
+									/* 		extern generated */
+#define XM_MD_TX_REP	(1L<<24)	/* Bit 24:	Transmit Repeater Mode */
+#define XM_MD_SPOFF_I	(1L<<23)	/* Bit 23:	Send Pause on FIFO full */
+									/*		intern generated */
+#define XM_MD_LE_STW	(1L<<22)	/* Bit 22:	Rx Stat Word in Little Endian */
+#define XM_MD_TX_CONT	(1L<<21)	/* Bit 21:	Send Continuous */
+#define XM_MD_TX_PAUSE	(1L<<20)	/* Bit 20: (sc)	Send Pause Frame */
+#define XM_MD_ATS		(1L<<19)	/* Bit 19:	Append Time Stamp */
+#define XM_MD_SPOL_I	(1L<<18)	/* Bit 18:	Send Pause on Low */
+									/*		intern generated */
+#define XM_MD_SPOH_I	(1L<<17)	/* Bit 17:	Send Pause on High */
+									/*		intern generated */
+#define XM_MD_CAP		(1L<<16)	/* Bit 16:	Check Address Pair */
+#define XM_MD_ENA_HASH	(1L<<15)	/* Bit 15:	Enable Hashing */
+#define XM_MD_CSA		(1L<<14)	/* Bit 14:	Check Station Address */
+#define XM_MD_CAA		(1L<<13)	/* Bit 13:	Check Address Array */
+#define XM_MD_RX_MCTRL	(1L<<12)	/* Bit 12:	Rx MAC Control Frame */
+#define XM_MD_RX_RUNT	(1L<<11)	/* Bit 11:	Rx Runt Frames */
+#define XM_MD_RX_IRLE	(1L<<10)	/* Bit 10:	Rx in Range Len Err Frame */
+#define XM_MD_RX_LONG	(1L<<9)		/* Bit  9:	Rx Long Frame */
+#define XM_MD_RX_CRCE	(1L<<8)		/* Bit  8:	Rx CRC Error Frame */
+#define XM_MD_RX_ERR	(1L<<7)		/* Bit  7:	Rx Error Frame */
+#define XM_MD_DIS_UC	(1L<<6)		/* Bit  6:	Disable Rx Unicast */
+#define XM_MD_DIS_MC	(1L<<5)		/* Bit  5:	Disable Rx Multicast */
+#define XM_MD_DIS_BC	(1L<<4)		/* Bit  4:	Disable Rx Broadcast */
+#define XM_MD_ENA_PROM	(1L<<3)		/* Bit  3:	Enable Promiscuous */
+#define XM_MD_ENA_BE	(1L<<2)		/* Bit  2:	Enable Big Endian */
+#define XM_MD_FTF		(1L<<1)		/* Bit  1: (sc)	Flush Tx FIFO */
+#define XM_MD_FRF		(1L<<0)		/* Bit  0: (sc)	Flush Rx FIFO */
+
+#define XM_PAUSE_MODE	(XM_MD_SPOE_E | XM_MD_SPOL_I | XM_MD_SPOH_I)
+#define XM_DEF_MODE		(XM_MD_RX_RUNT | XM_MD_RX_IRLE | XM_MD_RX_LONG |\
+				XM_MD_RX_CRCE | XM_MD_RX_ERR | XM_MD_CSA | XM_MD_CAA)
+
+/*	XM_STAT_CMD	16 bit r/w	Statistics Command Register */
+								/* Bit 16..6:	reserved */
+#define XM_SC_SNP_RXC	(1<<5)	/* Bit  5: (sc)	Snap Rx Counters */
+#define XM_SC_SNP_TXC	(1<<4)	/* Bit  4: (sc)	Snap Tx Counters */
+#define XM_SC_CP_RXC	(1<<3)	/* Bit  3: 	Copy Rx Counters Continuously */
+#define XM_SC_CP_TXC	(1<<2)	/* Bit  2:	Copy Tx Counters Continuously */
+#define XM_SC_CLR_RXC	(1<<1)	/* Bit  1: (sc)	Clear Rx Counters */
+#define XM_SC_CLR_TXC	(1<<0)	/* Bit  0: (sc) Clear Tx Counters */
+
+
+/*	XM_RX_CNT_EV	32 bit r/o	Rx Counter Event Register */
+/*	XM_RX_EV_MSK	32 bit r/w	Rx Counter Event Mask */
+#define XMR_MAX_SZ_OV	(1UL<<31)	/* Bit 31:	1024-MaxSize Rx Cnt Ov*/
+#define XMR_1023B_OV	(1L<<30)	/* Bit 30:	512-1023Byte Rx Cnt Ov*/
+#define XMR_511B_OV		(1L<<29)	/* Bit 29:	256-511 Byte Rx Cnt Ov*/
+#define XMR_255B_OV		(1L<<28)	/* Bit 28:	128-255 Byte Rx Cnt Ov*/
+#define XMR_127B_OV		(1L<<27)	/* Bit 27:	65-127 Byte Rx Cnt Ov */
+#define XMR_64B_OV		(1L<<26)	/* Bit 26:	64 Byte Rx Cnt Ov */
+#define XMR_UTIL_OV		(1L<<25)	/* Bit 25:	Rx Util Cnt Overflow */
+#define XMR_UTIL_UR		(1L<<24)	/* Bit 24:	Rx Util Cnt Underrun */
+#define XMR_CEX_ERR_OV	(1L<<23)	/* Bit 23:	CEXT Err Cnt Ov */
+									/* Bit 22:	reserved */
+#define XMR_FCS_ERR_OV	(1L<<21)	/* Bit 21:	Rx FCS Error Cnt Ov */
+#define XMR_LNG_ERR_OV	(1L<<20)	/* Bit 20:	Rx too Long Err Cnt Ov*/
+#define XMR_RUNT_OV		(1L<<19)	/* Bit 19:	Runt Event Cnt Ov */
+#define XMR_SHT_ERR_OV	(1L<<18)	/* Bit 18:	Rx Short Ev Err Cnt Ov*/
+#define XMR_SYM_ERR_OV	(1L<<17)	/* Bit 17:	Rx Sym Err Cnt Ov */
+									/* Bit 16:	reserved */
+#define XMR_CAR_ERR_OV	(1L<<15)	/* Bit 15:	Rx Carr Ev Err Cnt Ov */
+#define XMR_JAB_PKT_OV	(1L<<14)	/* Bit 14:	Rx Jabb Packet Cnt Ov */
+#define XMR_FIFO_OV		(1L<<13)	/* Bit 13:	Rx FIFO Ov Ev Cnt Ov */
+#define XMR_FRA_ERR_OV	(1L<<12)	/* Bit 12:	Rx Framing Err Cnt Ov */
+#define XMR_FMISS_OV	(1L<<11)	/* Bit 11:	Rx Missed Ev Cnt Ov */
+#define XMR_BURST		(1L<<10)	/* Bit 10:	Rx Burst Event Cnt Ov */
+#define XMR_INV_MOC		(1L<<9)		/* Bit  9:	Rx with inv. MAC OC Ov*/
+#define XMR_INV_MP		(1L<<8)		/* Bit  8:	Rx inv Pause Frame Ov */
+#define XMR_MCTRL_OV	(1L<<7)		/* Bit  7:	Rx MAC Ctrl-F Cnt Ov */
+#define XMR_MPAUSE_OV	(1L<<6)		/* Bit  6:	Rx Pause MAC Ctrl-F Ov*/
+#define XMR_UC_OK_OV	(1L<<5)		/* Bit  5:	Rx Unicast Frame CntOv*/
+#define XMR_MC_OK_OV	(1L<<4)		/* Bit  4:	Rx Multicast Cnt Ov */
+#define XMR_BC_OK_OV	(1L<<3)		/* Bit  3:	Rx Broadcast Cnt Ov */
+#define XMR_OK_LO_OV	(1L<<2)		/* Bit  2:	Octets Rx OK Low CntOv*/
+#define XMR_OK_HI_OV	(1L<<1)		/* Bit  1:	Octets Rx OK Hi Cnt Ov*/
+#define XMR_OK_OV		(1L<<0)		/* Bit  0:	Frames Received Ok Ov */
+
+#define XMR_DEF_MSK		(XMR_OK_LO_OV | XMR_OK_HI_OV)
+
+/*	XM_TX_CNT_EV	32 bit r/o	Tx Counter Event Register */
+/*	XM_TX_EV_MSK	32 bit r/w	Tx Counter Event Mask */
+									/* Bit 31..26:	reserved */
+#define XMT_MAX_SZ_OV	(1L<<25)	/* Bit 25:	1024-MaxSize Tx Cnt Ov*/
+#define XMT_1023B_OV	(1L<<24)	/* Bit 24:	512-1023Byte Tx Cnt Ov*/
+#define XMT_511B_OV		(1L<<23)	/* Bit 23:	256-511 Byte Tx Cnt Ov*/
+#define XMT_255B_OV		(1L<<22)	/* Bit 22:	128-255 Byte Tx Cnt Ov*/
+#define XMT_127B_OV		(1L<<21)	/* Bit 21:	65-127 Byte Tx Cnt Ov */
+#define XMT_64B_OV		(1L<<20)	/* Bit 20:	64 Byte Tx Cnt Ov */
+#define XMT_UTIL_OV		(1L<<19)	/* Bit 19:	Tx Util Cnt Overflow */
+#define XMT_UTIL_UR		(1L<<18)	/* Bit 18:	Tx Util Cnt Underrun */
+#define XMT_CS_ERR_OV	(1L<<17)	/* Bit 17:	Tx Carr Sen Err Cnt Ov*/
+#define XMT_FIFO_UR_OV	(1L<<16)	/* Bit 16:	Tx FIFO Ur Ev Cnt Ov */
+#define XMT_EX_DEF_OV	(1L<<15)	/* Bit 15:	Tx Ex Deferall Cnt Ov */
+#define XMT_DEF			(1L<<14)	/* Bit 14:	Tx Deferred Cnt Ov */
+#define XMT_LAT_COL_OV	(1L<<13)	/* Bit 13:	Tx Late Col Cnt Ov */
+#define XMT_ABO_COL_OV	(1L<<12)	/* Bit 12:	Tx abo dueto Ex Col Ov*/
+#define XMT_MUL_COL_OV	(1L<<11)	/* Bit 11:	Tx Mult Col Cnt Ov */
+#define XMT_SNG_COL		(1L<<10)	/* Bit 10:	Tx Single Col Cnt Ov */
+#define XMT_MCTRL_OV	(1L<<9)		/* Bit  9:	Tx MAC Ctrl Counter Ov*/
+#define XMT_MPAUSE		(1L<<8)		/* Bit  8:	Tx Pause MAC Ctrl-F Ov*/
+#define XMT_BURST		(1L<<7)		/* Bit  7:	Tx Burst Event Cnt Ov */
+#define XMT_LONG		(1L<<6)		/* Bit  6:	Tx Long Frame Cnt Ov */
+#define XMT_UC_OK_OV	(1L<<5)		/* Bit  5:	Tx Unicast Cnt Ov */
+#define XMT_MC_OK_OV	(1L<<4)		/* Bit  4:	Tx Multicast Cnt Ov */
+#define XMT_BC_OK_OV	(1L<<3)		/* Bit  3:	Tx Broadcast Cnt Ov */
+#define XMT_OK_LO_OV	(1L<<2)		/* Bit  2:	Octets Tx OK Low CntOv*/
+#define XMT_OK_HI_OV	(1L<<1)		/* Bit  1:	Octets Tx OK Hi Cnt Ov*/
+#define XMT_OK_OV		(1L<<0)		/* Bit  0:	Frames Tx Ok Ov */
+
+#define XMT_DEF_MSK		(XMT_OK_LO_OV | XMT_OK_HI_OV)
+
+/*
+ * Receive Frame Status Encoding
+ */
+#define XMR_FS_LEN	(0x3fffUL<<18)	/* Bit 31..18:	Rx Frame Length */
+#define XMR_FS_2L_VLAN	(1L<<17)	/* Bit 17:	tagged wh 2Lev VLAN ID*/
+#define XMR_FS_1L_VLAN	(1L<<16)	/* Bit 16:	tagged wh 1Lev VLAN ID*/
+#define XMR_FS_BC		(1L<<15)	/* Bit 15:	Broadcast Frame */
+#define XMR_FS_MC		(1L<<14)	/* Bit 14:	Multicast Frame */
+#define XMR_FS_UC		(1L<<13)	/* Bit 13:	Unicast Frame */
+									/* Bit 12:	reserved */
+#define XMR_FS_BURST	(1L<<11)	/* Bit 11:	Burst Mode */
+#define XMR_FS_CEX_ERR	(1L<<10)	/* Bit 10:	Carrier Ext. Error */
+#define XMR_FS_802_3	(1L<<9)		/* Bit  9:	802.3 Frame */
+#define XMR_FS_COL_ERR	(1L<<8)		/* Bit  8:	Collision Error */
+#define XMR_FS_CAR_ERR	(1L<<7)		/* Bit  7:	Carrier Event Error */
+#define XMR_FS_LEN_ERR	(1L<<6)		/* Bit  6:	In-Range Length Error */
+#define XMR_FS_FRA_ERR	(1L<<5)		/* Bit  5:	Framing Error */
+#define XMR_FS_RUNT		(1L<<4)		/* Bit  4:	Runt Frame */
+#define XMR_FS_LNG_ERR	(1L<<3)		/* Bit  3:	Giant (Jumbo) Frame */
+#define XMR_FS_FCS_ERR	(1L<<2)		/* Bit  2:	Frame Check Sequ Err */
+#define XMR_FS_ERR		(1L<<1)		/* Bit  1:	Frame Error */
+#define XMR_FS_MCTRL	(1L<<0)		/* Bit  0:	MAC Control Packet */
+
+/*
+ * XMR_FS_ERR will be set if
+ *	XMR_FS_FCS_ERR, XMR_FS_LNG_ERR, XMR_FS_RUNT,
+ *	XMR_FS_FRA_ERR, XMR_FS_LEN_ERR, or XMR_FS_CEX_ERR
+ * is set. XMR_FS_LNG_ERR and XMR_FS_LEN_ERR will issue
+ * XMR_FS_ERR unless the corresponding bit in the Receive Command
+ * Register is set.
+ */
+#define XMR_FS_ANY_ERR	XMR_FS_ERR
+
+/*----------------------------------------------------------------------------*/
+/*
+ * XMAC-PHY Registers, indirect addressed over the XMAC
+ */
+#define PHY_XMAC_CTRL		0x00	/* 16 bit r/w	PHY Control Register */
+#define PHY_XMAC_STAT		0x01	/* 16 bit r/w	PHY Status Register */
+#define PHY_XMAC_ID0		0x02	/* 16 bit r/o	PHY ID0 Register */
+#define PHY_XMAC_ID1		0x03	/* 16 bit r/o	PHY ID1 Register */
+#define PHY_XMAC_AUNE_ADV	0x04	/* 16 bit r/w	Auto-Neg. Advertisement */
+#define PHY_XMAC_AUNE_LP	0x05	/* 16 bit r/o	Link Partner Abi Reg */
+#define PHY_XMAC_AUNE_EXP	0x06	/* 16 bit r/o	Auto-Neg. Expansion Reg */
+#define PHY_XMAC_NEPG		0x07	/* 16 bit r/w	Next Page Register */
+#define PHY_XMAC_NEPG_LP	0x08	/* 16 bit r/o	Next Page Link Partner */
+	/* 0x09 - 0x0e:		reserved */
+#define PHY_XMAC_EXT_STAT	0x0f	/* 16 bit r/o	Ext Status Register */
+#define PHY_XMAC_RES_ABI	0x10	/* 16 bit r/o	PHY Resolved Ability */
+
+/*----------------------------------------------------------------------------*/
+/*
+ * Broadcom-PHY Registers, indirect addressed over XMAC
+ */
+#define PHY_BCOM_CTRL		0x00	/* 16 bit r/w	PHY Control Register */
+#define PHY_BCOM_STAT		0x01	/* 16 bit r/o	PHY Status Register */
+#define PHY_BCOM_ID0		0x02	/* 16 bit r/o	PHY ID0 Register */
+#define PHY_BCOM_ID1		0x03	/* 16 bit r/o	PHY ID1 Register */
+#define PHY_BCOM_AUNE_ADV	0x04	/* 16 bit r/w	Auto-Neg. Advertisement */
+#define PHY_BCOM_AUNE_LP	0x05	/* 16 bit r/o	Link Part Ability Reg */
+#define PHY_BCOM_AUNE_EXP	0x06	/* 16 bit r/o	Auto-Neg. Expansion Reg */
+#define PHY_BCOM_NEPG		0x07	/* 16 bit r/w	Next Page Register */
+#define PHY_BCOM_NEPG_LP	0x08	/* 16 bit r/o	Next Page Link Partner */
+	/* Broadcom-specific registers */
+#define PHY_BCOM_1000T_CTRL	0x09	/* 16 bit r/w	1000Base-T Ctrl Reg */
+#define PHY_BCOM_1000T_STAT	0x0a	/* 16 bit r/o	1000Base-T Status Reg */
+	/* 0x0b - 0x0e:		reserved */
+#define PHY_BCOM_EXT_STAT	0x0f	/* 16 bit r/o	Extended Status Reg */
+#define PHY_BCOM_P_EXT_CTRL	0x10	/* 16 bit r/w	PHY Extended Ctrl Reg */
+#define PHY_BCOM_P_EXT_STAT	0x11	/* 16 bit r/o	PHY Extended Stat Reg */
+#define PHY_BCOM_RE_CTR		0x12	/* 16 bit r/w	Receive Error Counter */
+#define PHY_BCOM_FC_CTR		0x13	/* 16 bit r/w	False Carrier Sense Cnt */
+#define PHY_BCOM_RNO_CTR	0x14	/* 16 bit r/w	Receiver NOT_OK Cnt */
+	/* 0x15 - 0x17:		reserved */
+#define PHY_BCOM_AUX_CTRL	0x18	/* 16 bit r/w	Auxiliary Control Reg */
+#define PHY_BCOM_AUX_STAT	0x19	/* 16 bit r/o	Auxiliary Stat Summary */
+#define PHY_BCOM_INT_STAT	0x1a	/* 16 bit r/o	Interrupt Status Reg */
+#define PHY_BCOM_INT_MASK	0x1b	/* 16 bit r/w	Interrupt Mask Reg */
+	/* 0x1c:		reserved */
+	/* 0x1d - 0x1f:		test registers */
+
+/*----------------------------------------------------------------------------*/
+/*
+ * Marvel-PHY Registers, indirect addressed over GMAC
+ */
+#define PHY_MARV_CTRL		0x00	/* 16 bit r/w	PHY Control Register */
+#define PHY_MARV_STAT		0x01	/* 16 bit r/o	PHY Status Register */
+#define PHY_MARV_ID0		0x02	/* 16 bit r/o	PHY ID0 Register */
+#define PHY_MARV_ID1		0x03	/* 16 bit r/o	PHY ID1 Register */
+#define PHY_MARV_AUNE_ADV	0x04	/* 16 bit r/w	Auto-Neg. Advertisement */
+#define PHY_MARV_AUNE_LP	0x05	/* 16 bit r/o	Link Part Ability Reg */
+#define PHY_MARV_AUNE_EXP	0x06	/* 16 bit r/o	Auto-Neg. Expansion Reg */
+#define PHY_MARV_NEPG		0x07	/* 16 bit r/w	Next Page Register */
+#define PHY_MARV_NEPG_LP	0x08	/* 16 bit r/o	Next Page Link Partner */
+	/* Marvel-specific registers */
+#define PHY_MARV_1000T_CTRL	0x09	/* 16 bit r/w	1000Base-T Ctrl Reg */
+#define PHY_MARV_1000T_STAT	0x0a	/* 16 bit r/o	1000Base-T Status Reg */
+	/* 0x0b - 0x0e:		reserved */
+#define PHY_MARV_EXT_STAT	0x0f	/* 16 bit r/o	Extended Status Reg */
+#define PHY_MARV_PHY_CTRL	0x10	/* 16 bit r/w	PHY Specific Ctrl Reg */
+#define PHY_MARV_PHY_STAT	0x11	/* 16 bit r/o	PHY Specific Stat Reg */
+#define PHY_MARV_INT_MASK	0x12	/* 16 bit r/w	Interrupt Mask Reg */
+#define PHY_MARV_INT_STAT	0x13	/* 16 bit r/o	Interrupt Status Reg */
+#define PHY_MARV_EXT_CTRL	0x14	/* 16 bit r/w	Ext. PHY Specific Ctrl */
+#define PHY_MARV_RXE_CNT	0x15	/* 16 bit r/w	Receive Error Counter */
+#define PHY_MARV_EXT_ADR	0x16	/* 16 bit r/w	Ext. Ad. for Cable Diag. */
+	/* 0x17:		reserved */
+#define PHY_MARV_LED_CTRL	0x18	/* 16 bit r/w	LED Control Reg */
+#define PHY_MARV_LED_OVER	0x19	/* 16 bit r/w	Manual LED Override Reg */
+#define PHY_MARV_EXT_CTRL_2	0x1a	/* 16 bit r/w	Ext. PHY Specific Ctrl 2 */
+#define PHY_MARV_EXT_P_STAT	0x1b	/* 16 bit r/w	Ext. PHY Spec. Stat Reg */
+#define PHY_MARV_CABLE_DIAG	0x1c	/* 16 bit r/o	Cable Diagnostic Reg */
+	/* 0x1d - 0x1f:		reserved */
+
+/*----------------------------------------------------------------------------*/
+/*
+ * Level One-PHY Registers, indirect addressed over XMAC
+ */
+#define PHY_LONE_CTRL		0x00	/* 16 bit r/w	PHY Control Register */
+#define PHY_LONE_STAT		0x01	/* 16 bit r/o	PHY Status Register */
+#define PHY_LONE_ID0		0x02	/* 16 bit r/o	PHY ID0 Register */
+#define PHY_LONE_ID1		0x03	/* 16 bit r/o	PHY ID1 Register */
+#define PHY_LONE_AUNE_ADV	0x04	/* 16 bit r/w	Auto-Neg. Advertisement */
+#define PHY_LONE_AUNE_LP	0x05	/* 16 bit r/o	Link Part Ability Reg */
+#define PHY_LONE_AUNE_EXP	0x06	/* 16 bit r/o	Auto-Neg. Expansion Reg */
+#define PHY_LONE_NEPG		0x07	/* 16 bit r/w	Next Page Register */
+#define PHY_LONE_NEPG_LP	0x08	/* 16 bit r/o	Next Page Link Partner */
+	/* Level One-specific registers */
+#define PHY_LONE_1000T_CTRL	0x09	/* 16 bit r/w	1000Base-T Control Reg*/
+#define PHY_LONE_1000T_STAT	0x0a	/* 16 bit r/o	1000Base-T Status Reg */
+	/* 0x0b -0x0e:		reserved */
+#define PHY_LONE_EXT_STAT	0x0f	/* 16 bit r/o	Extended Status Reg */
+#define PHY_LONE_PORT_CFG	0x10	/* 16 bit r/w	Port Configuration Reg*/
+#define PHY_LONE_Q_STAT		0x11	/* 16 bit r/o	Quick Status Reg */
+#define PHY_LONE_INT_ENAB	0x12	/* 16 bit r/w	Interrupt Enable Reg */
+#define PHY_LONE_INT_STAT	0x13	/* 16 bit r/o	Interrupt Status Reg */
+#define PHY_LONE_LED_CFG	0x14	/* 16 bit r/w	LED Configuration Reg */
+#define PHY_LONE_PORT_CTRL	0x15	/* 16 bit r/w	Port Control Reg */
+#define PHY_LONE_CIM		0x16	/* 16 bit r/o	CIM Reg */
+	/* 0x17 -0x1c:		reserved */
+
+/*----------------------------------------------------------------------------*/
+/*
+ * National-PHY Registers, indirect addressed over XMAC
+ */
+#define PHY_NAT_CTRL		0x00	/* 16 bit r/w	PHY Control Register */
+#define PHY_NAT_STAT		0x01	/* 16 bit r/w	PHY Status Register */
+#define PHY_NAT_ID0			0x02	/* 16 bit r/o	PHY ID0 Register */
+#define PHY_NAT_ID1			0x03	/* 16 bit r/o	PHY ID1 Register */
+#define PHY_NAT_AUNE_ADV	0x04	/* 16 bit r/w	Auto-Neg. Advertisement */
+#define PHY_NAT_AUNE_LP		0x05	/* 16 bit r/o	Link Partner Ability Reg */
+#define PHY_NAT_AUNE_EXP	0x06	/* 16 bit r/o	Auto-Neg. Expansion Reg */
+#define PHY_NAT_NEPG		0x07	/* 16 bit r/w	Next Page Register */
+#define PHY_NAT_NEPG_LP		0x08	/* 16 bit r/o	Next Page Link Partner Reg */
+	/* National-specific registers */
+#define PHY_NAT_1000T_CTRL	0x09	/* 16 bit r/w	1000Base-T Control Reg */
+#define PHY_NAT_1000T_STAT	0x0a	/* 16 bit r/o	1000Base-T Status Reg */
+	/* 0x0b -0x0e:		reserved */
+#define PHY_NAT_EXT_STAT	0x0f	/* 16 bit r/o	Extended Status Register */
+#define PHY_NAT_EXT_CTRL1	0x10	/* 16 bit r/o	Extended Control Reg1 */
+#define PHY_NAT_Q_STAT1		0x11	/* 16 bit r/o	Quick Status Reg1 */
+#define PHY_NAT_10B_OP		0x12	/* 16 bit r/o	10Base-T Operations Reg */
+#define PHY_NAT_EXT_CTRL2	0x13	/* 16 bit r/o	Extended Control Reg1 */
+#define PHY_NAT_Q_STAT2		0x14	/* 16 bit r/o	Quick Status Reg2 */
+	/* 0x15 -0x18:		reserved */
+#define PHY_NAT_PHY_ADDR	0x19	/* 16 bit r/o	PHY Address Register */
+
+
+/*----------------------------------------------------------------------------*/
+
+/*
+ * PHY bit definitions
+ * Bits defined as PHY_X_..., PHY_B_..., PHY_L_... or PHY_N_... are
+ * XMAC/Broadcom/LevelOne/National/Marvell-specific.
+ * All other are general.
+ */
+
+/*****  PHY_XMAC_CTRL	16 bit r/w	PHY Control Register *****/
+/*****  PHY_BCOM_CTRL	16 bit r/w	PHY Control Register *****/
+/*****  PHY_MARV_CTRL	16 bit r/w	PHY Status Register *****/
+/*****  PHY_LONE_CTRL	16 bit r/w	PHY Control Register *****/
+#define PHY_CT_RESET	(1<<15)	/* Bit 15: (sc)	clear all PHY related regs */
+#define PHY_CT_LOOP		(1<<14)	/* Bit 14:	enable Loopback over PHY */
+#define PHY_CT_SPS_LSB	(1<<13) /* Bit 13: (BC,L1) Speed select, lower bit */
+#define PHY_CT_ANE		(1<<12)	/* Bit 12:	Auto-Negotiation Enabled */
+#define PHY_CT_PDOWN	(1<<11)	/* Bit 11: (BC,L1) Power Down Mode */
+#define PHY_CT_ISOL		(1<<10)	/* Bit 10: (BC,L1) Isolate Mode */
+#define PHY_CT_RE_CFG	(1<<9)	/* Bit  9: (sc) Restart Auto-Negotiation */
+#define PHY_CT_DUP_MD	(1<<8)	/* Bit  8:	Duplex Mode */
+#define PHY_CT_COL_TST	(1<<7)	/* Bit  7: (BC,L1) Collision Test enabled */
+#define PHY_CT_SPS_MSB	(1<<6)	/* Bit  6: (BC,L1) Speed select, upper bit */
+								/* Bit  5..0:	reserved */
+
+#define PHY_CT_SP1000	PHY_CT_SPS_MSB	/* enable speed of 1000 Mbps */
+#define PHY_CT_SP100	PHY_CT_SPS_LSB	/* enable speed of  100 Mbps */
+#define PHY_CT_SP10		(0)				/* enable speed of   10 Mbps */
+
+
+/*****  PHY_XMAC_STAT	16 bit r/w	PHY Status Register *****/
+/*****  PHY_BCOM_STAT	16 bit r/w	PHY Status Register *****/
+/*****  PHY_MARV_STAT	16 bit r/w	PHY Status Register *****/
+/*****  PHY_LONE_STAT	16 bit r/w	PHY Status Register *****/
+								/* Bit 15..9:	reserved */
+				/*	(BC/L1) 100/10 Mbps cap bits ignored*/
+#define PHY_ST_EXT_ST	(1<<8)	/* Bit  8:	Extended Status Present */
+								/* Bit  7:	reserved */
+#define PHY_ST_PRE_SUP	(1<<6)	/* Bit  6: (BC/L1) preamble suppression */
+#define PHY_ST_AN_OVER	(1<<5)	/* Bit  5:	Auto-Negotiation Over */
+#define PHY_ST_REM_FLT	(1<<4)	/* Bit  4:	Remote Fault Condition Occured */
+#define PHY_ST_AN_CAP	(1<<3)	/* Bit  3:	Auto-Negotiation Capability */
+#define PHY_ST_LSYNC	(1<<2)	/* Bit  2:	Link Synchronized */
+#define PHY_ST_JAB_DET	(1<<1)	/* Bit  1: (BC/L1) Jabber Detected */
+#define PHY_ST_EXT_REG	(1<<0)	/* Bit  0:	Extended Register available */
+
+
+/*****	PHY_XMAC_ID1		16 bit r/o	PHY ID1 Register */
+/*****	PHY_BCOM_ID1		16 bit r/o	PHY ID1 Register */
+/*****	PHY_MARV_ID1		16 bit r/o	PHY ID1 Register */
+/*****	PHY_LONE_ID1		16 bit r/o	PHY ID1 Register */
+#define PHY_I1_OUI_MSK	(0x3f<<10)	/* Bit 15..10:	Organization Unique ID */
+#define PHY_I1_MOD_NUM	(0x3f<<4)	/* Bit  9.. 4:	Model Number */
+#define PHY_I1_REV_MSK	0x0f		/* Bit  3.. 0:	Revision Number */
+
+/* different Broadcom PHY Ids */
+#define PHY_BCOM_ID1_A1		0x6041
+#define PHY_BCOM_ID1_B2		0x6043
+#define PHY_BCOM_ID1_C0		0x6044
+#define PHY_BCOM_ID1_C5		0x6047
+
+
+/*****  PHY_XMAC_AUNE_ADV	16 bit r/w	Auto-Negotiation Advertisement *****/
+/*****  PHY_XMAC_AUNE_LP	16 bit r/o	Link Partner Ability Reg *****/
+#define PHY_AN_NXT_PG	(1<<15)	/* Bit 15:	Request Next Page */
+#define PHY_X_AN_ACK	(1<<14)	/* Bit 14: (ro)	Acknowledge Received */
+#define PHY_X_AN_RFB	(3<<12)	/* Bit 13..12:	Remote Fault Bits */
+								/* Bit 11.. 9:	reserved */
+#define PHY_X_AN_PAUSE	(3<<7)	/* Bit  8.. 7:	Pause Bits */
+#define PHY_X_AN_HD		(1<<6)	/* Bit  6:	Half Duplex */
+#define PHY_X_AN_FD		(1<<5)	/* Bit  5:	Full Duplex */
+								/* Bit  4.. 0:	reserved */
+
+/*****  PHY_BCOM_AUNE_ADV	16 bit r/w	Auto-Negotiation Advertisement *****/
+/*****  PHY_BCOM_AUNE_LP	16 bit r/o	Link Partner Ability Reg *****/
+/*	PHY_AN_NXT_PG		(see XMAC) Bit 15:	Request Next Page */
+								/* Bit 14:	reserved */
+#define PHY_B_AN_RF		(1<<13)	/* Bit 13:	Remote Fault */
+								/* Bit 12:	reserved */
+#define PHY_B_AN_ASP	(1<<11)	/* Bit 11:	Asymmetric Pause */
+#define PHY_B_AN_PC		(1<<10)	/* Bit 10:	Pause Capable */
+								/* Bit  9..5:	100/10 BT cap bits ingnored */
+#define PHY_B_AN_SEL	0x1f	/* Bit 4..0:	Selector Field, 00001=Ethernet*/
+
+/*****  PHY_LONE_AUNE_ADV	16 bit r/w	Auto-Negotiation Advertisement *****/
+/*****  PHY_LONE_AUNE_LP	16 bit r/o	Link Partner Ability Reg *****/
+/*	PHY_AN_NXT_PG		(see XMAC) Bit 15:	Request Next Page */
+								/* Bit 14:	reserved */
+#define PHY_L_AN_RF		(1<<13)	/* Bit 13:	Remote Fault */
+								/* Bit 12:	reserved */
+#define PHY_L_AN_ASP	(1<<11)	/* Bit 11:	Asymmetric Pause */
+#define PHY_L_AN_PC		(1<<10)	/* Bit 10:	Pause Capable */
+								/* Bit  9..5:	100/10 BT cap bits ingnored */
+#define PHY_L_AN_SEL	0x1f	/* Bit 4..0:	Selector Field, 00001=Ethernet*/
+
+/*****  PHY_NAT_AUNE_ADV	16 bit r/w	Auto-Negotiation Advertisement *****/
+/*****  PHY_NAT_AUNE_LP		16 bit r/o	Link Partner Ability Reg *****/
+/*	PHY_AN_NXT_PG		(see XMAC) Bit 15:	Request Next Page */
+								/* Bit 14:	reserved */
+#define PHY_N_AN_RF		(1<<13)	/* Bit 13:	Remote Fault */
+								/* Bit 12:	reserved */
+#define PHY_N_AN_100F	(1<<11)	/* Bit 11:	100Base-T2 FD Support */
+#define PHY_N_AN_100H	(1<<10)	/* Bit 10:	100Base-T2 HD Support */
+								/* Bit  9..5:	100/10 BT cap bits ingnored */
+#define PHY_N_AN_SEL	0x1f	/* Bit 4..0:	Selector Field, 00001=Ethernet*/
+
+/* field type definition for PHY_x_AN_SEL */
+#define PHY_SEL_TYPE	0x01	/* 00001 = Ethernet */
+
+/*****  PHY_XMAC_AUNE_EXP	16 bit r/o	Auto-Negotiation Expansion Reg *****/
+								/* Bit 15..4:	reserved */
+#define PHY_ANE_LP_NP	(1<<3)	/* Bit  3:	Link Partner can Next Page */
+#define PHY_ANE_LOC_NP	(1<<2)	/* Bit  2:	Local PHY can Next Page */
+#define PHY_ANE_RX_PG	(1<<1)	/* Bit  1:	Page Received */
+								/* Bit  0:	reserved */
+
+/*****  PHY_BCOM_AUNE_EXP	16 bit r/o	Auto-Negotiation Expansion Reg *****/
+/*****  PHY_LONE_AUNE_EXP	16 bit r/o	Auto-Negotiation Expansion Reg *****/
+/*****  PHY_MARV_AUNE_EXP	16 bit r/o	Auto-Negotiation Expansion Reg *****/
+								/* Bit 15..5:	reserved */
+#define PHY_ANE_PAR_DF	(1<<4)	/* Bit  4:	Parallel Detection Fault */
+/*	PHY_ANE_LP_NP		(see XMAC) Bit  3:	Link Partner can Next Page */
+/*	PHY_ANE_LOC_NP		(see XMAC) Bit  2:	Local PHY can Next Page */
+/*	PHY_ANE_RX_PG		(see XMAC) Bit  1:	Page Received */
+#define PHY_ANE_LP_CAP	(1<<0)	/* Bit  0:	Link Partner Auto-Neg. Cap. */ 	
+
+/*****  PHY_XMAC_NEPG		16 bit r/w	Next Page Register *****/
+/*****  PHY_BCOM_NEPG		16 bit r/w	Next Page Register *****/
+/*****  PHY_LONE_NEPG		16 bit r/w	Next Page Register *****/
+/*****  PHY_XMAC_NEPG_LP	16 bit r/o	Next Page Link Partner *****/
+/*****  PHY_BCOM_NEPG_LP	16 bit r/o	Next Page Link Partner *****/
+/*****  PHY_LONE_NEPG_LP	16 bit r/o	Next Page Link Partner *****/
+#define PHY_NP_MORE		(1<<15)	/* Bit 15:	More, Next Pages to follow */
+#define PHY_NP_ACK1		(1<<14)	/* Bit 14: (ro)	Ack1, for receiving a message */
+#define PHY_NP_MSG_VAL	(1<<13)	/* Bit 13:	Message Page valid */
+#define PHY_NP_ACK2		(1<<12)	/* Bit 12:	Ack2, comply with msg content */
+#define PHY_NP_TOG		(1<<11)	/* Bit 11:	Toggle Bit, ensure sync */
+#define PHY_NP_MSG		0x07ff	/* Bit 10..0:	Message from/to Link Partner */
+
+/*
+ * XMAC-Specific
+ */
+/*****  PHY_XMAC_EXT_STAT	16 bit r/w	Extended Status Register *****/
+#define PHY_X_EX_FD		(1<<15)	/* Bit 15:	Device Supports Full Duplex */
+#define PHY_X_EX_HD		(1<<14)	/* Bit 14:	Device Supports Half Duplex */
+								/* Bit 13..0:	reserved */
+
+/*****  PHY_XMAC_RES_ABI	16 bit r/o	PHY Resolved Ability *****/
+								/* Bit 15..9:	reserved */
+#define PHY_X_RS_PAUSE	(3<<7)	/* Bit  8..7:	selected Pause Mode */
+#define PHY_X_RS_HD		(1<<6)	/* Bit  6:	Half Duplex Mode selected */
+#define PHY_X_RS_FD		(1<<5)	/* Bit  5:	Full Duplex Mode selected */
+#define PHY_X_RS_ABLMIS (1<<4)	/* Bit  4:	duplex or pause cap mismatch */
+#define PHY_X_RS_PAUMIS (1<<3)	/* Bit  3:	pause capability mismatch */
+								/* Bit  2..0:	reserved */
+/*
+ * Remote Fault Bits (PHY_X_AN_RFB) encoding
+ */
+#define X_RFB_OK		(0<<12)	/* Bit 13..12	No errors, Link OK */
+#define X_RFB_LF		(1<<12)	/* Bit 13..12	Link Failure */
+#define X_RFB_OFF		(2<<12)	/* Bit 13..12	Offline */
+#define X_RFB_AN_ERR	(3<<12)	/* Bit 13..12	Auto-Negotiation Error */
+
+/*
+ * Pause Bits (PHY_X_AN_PAUSE and PHY_X_RS_PAUSE) encoding
+ */
+#define PHY_X_P_NO_PAUSE	(0<<7)	/* Bit  8..7:	no Pause Mode */
+#define PHY_X_P_SYM_MD		(1<<7)	/* Bit  8..7:	symmetric Pause Mode */
+#define PHY_X_P_ASYM_MD		(2<<7)	/* Bit  8..7:	asymmetric Pause Mode */
+#define PHY_X_P_BOTH_MD		(3<<7)	/* Bit  8..7:	both Pause Mode */
+
+
+/*
+ * Broadcom-Specific
+ */
+/*****  PHY_BCOM_1000T_CTRL	16 bit r/w	1000Base-T Control Reg *****/
+#define PHY_B_1000C_TEST	(7<<13)	/* Bit 15..13:	Test Modes */
+#define PHY_B_1000C_MSE		(1<<12)	/* Bit 12:	Master/Slave Enable */
+#define PHY_B_1000C_MSC		(1<<11)	/* Bit 11:	M/S Configuration */
+#define PHY_B_1000C_RD		(1<<10)	/* Bit 10:	Repeater/DTE */
+#define PHY_B_1000C_AFD		(1<<9)	/* Bit  9:	Advertise Full Duplex */
+#define PHY_B_1000C_AHD		(1<<8)	/* Bit  8:	Advertise Half Duplex */
+									/* Bit  7..0:	reserved */
+
+/*****  PHY_BCOM_1000T_STAT	16 bit r/o	1000Base-T Status Reg *****/
+/*****  PHY_MARV_1000T_STAT	16 bit r/o	1000Base-T Status Reg *****/
+#define PHY_B_1000S_MSF		(1<<15)	/* Bit 15:	Master/Slave Fault */
+#define PHY_B_1000S_MSR		(1<<14)	/* Bit 14:	Master/Slave Result */
+#define PHY_B_1000S_LRS		(1<<13)	/* Bit 13:	Local Receiver Status */
+#define PHY_B_1000S_RRS		(1<<12)	/* Bit 12:	Remote Receiver Status */
+#define PHY_B_1000S_LP_FD	(1<<11)	/* Bit 11:	Link Partner can FD */
+#define PHY_B_1000S_LP_HD	(1<<10)	/* Bit 10:	Link Partner can HD */
+									/* Bit  9..8:	reserved */
+#define PHY_B_1000S_IEC		0xff	/* Bit  7..0:	Idle Error Count */
+
+/*****  PHY_BCOM_EXT_STAT	16 bit r/o	Extended Status Register *****/
+#define PHY_B_ES_X_FD_CAP	(1<<15)	/* Bit 15:	1000Base-X FD capable */
+#define PHY_B_ES_X_HD_CAP	(1<<14)	/* Bit 14:	1000Base-X HD capable */
+#define PHY_B_ES_T_FD_CAP	(1<<13)	/* Bit 13:	1000Base-T FD capable */
+#define PHY_B_ES_T_HD_CAP	(1<<12)	/* Bit 12:	1000Base-T HD capable */
+									/* Bit 11..0:	reserved */
+
+/*****  PHY_BCOM_P_EXT_CTRL	16 bit r/w	PHY Extended Control Reg *****/
+#define PHY_B_PEC_MAC_PHY	(1<<15)	/* Bit 15:	10BIT/GMI-Interface */
+#define PHY_B_PEC_DIS_CROSS	(1<<14)	/* Bit 14:	Disable MDI Crossover */
+#define PHY_B_PEC_TX_DIS	(1<<13)	/* Bit 13:	Tx output Disabled */
+#define PHY_B_PEC_INT_DIS	(1<<12)	/* Bit 12:	Interrupts Disabled */
+#define PHY_B_PEC_F_INT		(1<<11)	/* Bit 11:	Force Interrupt */
+#define PHY_B_PEC_BY_45		(1<<10)	/* Bit 10:	Bypass 4B5B-Decoder */
+#define PHY_B_PEC_BY_SCR	(1<<9)	/* Bit  9:	Bypass Scrambler */
+#define PHY_B_PEC_BY_MLT3	(1<<8)	/* Bit  8:	Bypass MLT3 Encoder */
+#define PHY_B_PEC_BY_RXA	(1<<7)	/* Bit  7:	Bypass Rx Alignm. */
+#define PHY_B_PEC_RES_SCR	(1<<6)	/* Bit  6:	Reset Scrambler */
+#define PHY_B_PEC_EN_LTR	(1<<5)	/* Bit  5:	Ena LED Traffic Mode */
+#define PHY_B_PEC_LED_ON	(1<<4)	/* Bit  4:	Force LED's on */
+#define PHY_B_PEC_LED_OFF	(1<<3)	/* Bit  3:	Force LED's off */
+#define PHY_B_PEC_EX_IPG	(1<<2)	/* Bit  2:	Extend Tx IPG Mode */
+#define PHY_B_PEC_3_LED		(1<<1)	/* Bit  1:	Three Link LED mode */
+#define PHY_B_PEC_HIGH_LA	(1<<0)	/* Bit  0:	GMII FIFO Elasticy */
+
+/*****  PHY_BCOM_P_EXT_STAT	16 bit r/o	PHY Extended Status Reg *****/
+									/* Bit 15..14:	reserved */
+#define PHY_B_PES_CROSS_STAT	(1<<13)	/* Bit 13:	MDI Crossover Status */
+#define PHY_B_PES_INT_STAT	(1<<12)	/* Bit 12:	Interrupt Status */
+#define PHY_B_PES_RRS		(1<<11)	/* Bit 11:	Remote Receiver Stat. */
+#define PHY_B_PES_LRS		(1<<10)	/* Bit 10:	Local Receiver Stat. */
+#define PHY_B_PES_LOCKED	(1<<9)	/* Bit  9:	Locked */
+#define PHY_B_PES_LS		(1<<8)	/* Bit  8:	Link Status */
+#define PHY_B_PES_RF		(1<<7)	/* Bit  7:	Remote Fault */
+#define PHY_B_PES_CE_ER		(1<<6)	/* Bit  6:	Carrier Ext Error */
+#define PHY_B_PES_BAD_SSD	(1<<5)	/* Bit  5:	Bad SSD */
+#define PHY_B_PES_BAD_ESD	(1<<4)	/* Bit  4:	Bad ESD */
+#define PHY_B_PES_RX_ER		(1<<3)	/* Bit  3:	Receive Error */
+#define PHY_B_PES_TX_ER		(1<<2)	/* Bit  2:	Transmit Error */
+#define PHY_B_PES_LOCK_ER	(1<<1)	/* Bit  1:	Lock Error */
+#define PHY_B_PES_MLT3_ER	(1<<0)	/* Bit  0:	MLT3 code Error */
+
+/*****  PHY_BCOM_FC_CTR		16 bit r/w	False Carrier Counter *****/
+									/* Bit 15..8:	reserved */
+#define PHY_B_FC_CTR		0xff	/* Bit  7..0:	False Carrier Counter */
+
+/*****  PHY_BCOM_RNO_CTR	16 bit r/w	Receive NOT_OK Counter *****/
+#define PHY_B_RC_LOC_MSK	0xff00	/* Bit 15..8:	Local Rx NOT_OK cnt */
+#define PHY_B_RC_REM_MSK	0x00ff	/* Bit  7..0:	Remote Rx NOT_OK cnt */
+
+/*****  PHY_BCOM_AUX_CTRL	16 bit r/w	Auxiliary Control Reg *****/
+#define PHY_B_AC_L_SQE		(1<<15)	/* Bit 15:	Low Squelch */
+#define PHY_B_AC_LONG_PACK	(1<<14)	/* Bit 14:	Rx Long Packets */
+#define PHY_B_AC_ER_CTRL	(3<<12)	/* Bit 13..12:	Edgerate Control */
+									/* Bit 11:	reserved */
+#define PHY_B_AC_TX_TST		(1<<10) /* Bit 10:	Tx test bit, always 1 */
+									/* Bit  9.. 8:	reserved */
+#define PHY_B_AC_DIS_PRF	(1<<7)	/* Bit  7:	dis part resp filter */
+									/* Bit  6:	reserved */
+#define PHY_B_AC_DIS_PM		(1<<5)	/* Bit  5:	dis power management */
+									/* Bit  4:	reserved */
+#define PHY_B_AC_DIAG		(1<<3)	/* Bit  3:	Diagnostic Mode */
+									/* Bit  2.. 0:	reserved */
+
+/*****  PHY_BCOM_AUX_STAT	16 bit r/o	Auxiliary Status Reg *****/
+#define PHY_B_AS_AN_C		(1<<15)	/* Bit 15:	AutoNeg complete */
+#define PHY_B_AS_AN_CA		(1<<14)	/* Bit 14:	AN Complete Ack */
+#define PHY_B_AS_ANACK_D	(1<<13)	/* Bit 13:	AN Ack Detect */
+#define PHY_B_AS_ANAB_D		(1<<12)	/* Bit 12:	AN Ability Detect */
+#define PHY_B_AS_NPW		(1<<11)	/* Bit 11:	AN Next Page Wait */
+#define PHY_B_AS_AN_RES_MSK	(7<<8)	/* Bit 10..8:	AN HDC */
+#define PHY_B_AS_PDF		(1<<7)	/* Bit  7:	Parallel Detect. Fault */
+#define PHY_B_AS_RF			(1<<6)	/* Bit  6:	Remote Fault */
+#define PHY_B_AS_ANP_R		(1<<5)	/* Bit  5:	AN Page Received */
+#define PHY_B_AS_LP_ANAB	(1<<4)	/* Bit  4:	LP AN Ability */
+#define PHY_B_AS_LP_NPAB	(1<<3)	/* Bit  3:	LP Next Page Ability */
+#define PHY_B_AS_LS			(1<<2)	/* Bit  2:	Link Status */
+#define PHY_B_AS_PRR		(1<<1)	/* Bit  1:	Pause Resolution-Rx */
+#define PHY_B_AS_PRT		(1<<0)	/* Bit  0:	Pause Resolution-Tx */
+
+#define PHY_B_AS_PAUSE_MSK	(PHY_B_AS_PRR | PHY_B_AS_PRT)
+
+/*****  PHY_BCOM_INT_STAT	16 bit r/o	Interrupt Status Reg *****/
+/*****  PHY_BCOM_INT_MASK	16 bit r/w	Interrupt Mask Reg *****/
+									/* Bit 15:	reserved */
+#define PHY_B_IS_PSE		(1<<14)	/* Bit 14:	Pair Swap Error */
+#define PHY_B_IS_MDXI_SC	(1<<13)	/* Bit 13:	MDIX Status Change */
+#define PHY_B_IS_HCT		(1<<12)	/* Bit 12:	counter above 32k */
+#define PHY_B_IS_LCT		(1<<11)	/* Bit 11:	counter above 128 */
+#define PHY_B_IS_AN_PR		(1<<10)	/* Bit 10:	Page Received */
+#define PHY_B_IS_NO_HDCL	(1<<9)	/* Bit  9:	No HCD Link */
+#define PHY_B_IS_NO_HDC		(1<<8)	/* Bit  8:	No HCD */
+#define PHY_B_IS_NEG_USHDC	(1<<7)	/* Bit  7:	Negotiated Unsup. HCD */
+#define PHY_B_IS_SCR_S_ER	(1<<6)	/* Bit  6:	Scrambler Sync Error */
+#define PHY_B_IS_RRS_CHANGE	(1<<5)	/* Bit  5:	Remote Rx Stat Change */
+#define PHY_B_IS_LRS_CHANGE	(1<<4)	/* Bit  4:	Local Rx Stat Change */
+#define PHY_B_IS_DUP_CHANGE	(1<<3)	/* Bit  3:	Duplex Mode Change */
+#define PHY_B_IS_LSP_CHANGE	(1<<2)	/* Bit  2:	Link Speed Change */
+#define PHY_B_IS_LST_CHANGE	(1<<1)	/* Bit  1:	Link Status Changed */
+#define PHY_B_IS_CRC_ER		(1<<0)	/* Bit  0:	CRC Error */
+
+#define PHY_B_DEF_MSK	(~(PHY_B_IS_AN_PR | PHY_B_IS_LST_CHANGE))
+
+/* Pause Bits (PHY_B_AN_ASP and PHY_B_AN_PC) encoding */
+#define PHY_B_P_NO_PAUSE	(0<<10)	/* Bit 11..10:	no Pause Mode */
+#define PHY_B_P_SYM_MD		(1<<10)	/* Bit 11..10:	symmetric Pause Mode */
+#define PHY_B_P_ASYM_MD		(2<<10)	/* Bit 11..10:	asymmetric Pause Mode */
+#define PHY_B_P_BOTH_MD		(3<<10)	/* Bit 11..10:	both Pause Mode */
+
+/*
+ * Resolved Duplex mode and Capabilities (Aux Status Summary Reg)
+ */
+#define PHY_B_RES_1000FD	(7<<8)	/* Bit 10..8:	1000Base-T Full Dup. */
+#define PHY_B_RES_1000HD	(6<<8)	/* Bit 10..8:	1000Base-T Half Dup. */
+/* others: 100/10: invalid for us */
+
+/*
+ * Level One-Specific
+ */
+/*****  PHY_LONE_1000T_CTRL	16 bit r/w	1000Base-T Control Reg *****/
+#define PHY_L_1000C_TEST	(7<<13)	/* Bit 15..13:	Test Modes */
+#define PHY_L_1000C_MSE		(1<<12)	/* Bit 12:	Master/Slave Enable */
+#define PHY_L_1000C_MSC		(1<<11)	/* Bit 11:	M/S Configuration */
+#define PHY_L_1000C_RD		(1<<10)	/* Bit 10:	Repeater/DTE */
+#define PHY_L_1000C_AFD		(1<<9)	/* Bit  9:	Advertise Full Duplex */
+#define PHY_L_1000C_AHD		(1<<8)	/* Bit  8:	Advertise Half Duplex */
+									/* Bit  7..0:	reserved */
+
+/*****  PHY_LONE_1000T_STAT	16 bit r/o	1000Base-T Status Reg *****/
+#define PHY_L_1000S_MSF		(1<<15)	/* Bit 15:	Master/Slave Fault */
+#define PHY_L_1000S_MSR		(1<<14)	/* Bit 14:	Master/Slave Result */
+#define PHY_L_1000S_LRS		(1<<13)	/* Bit 13:	Local Receiver Status */
+#define PHY_L_1000S_RRS		(1<<12)	/* Bit 12:	Remote Receiver Status */
+#define PHY_L_1000S_LP_FD	(1<<11)	/* Bit 11:	Link Partner can FD */
+#define PHY_L_1000S_LP_HD	(1<<10)	/* Bit 10:	Link Partner can HD */
+									/* Bit  9..8:	reserved */
+#define PHY_B_1000S_IEC		0xff	/* Bit  7..0:	Idle Error Count */
+
+/*****  PHY_LONE_EXT_STAT	16 bit r/o	Extended Status Register *****/
+#define PHY_L_ES_X_FD_CAP	(1<<15)	/* Bit 15:	1000Base-X FD capable */
+#define PHY_L_ES_X_HD_CAP	(1<<14)	/* Bit 14:	1000Base-X HD capable */
+#define PHY_L_ES_T_FD_CAP	(1<<13)	/* Bit 13:	1000Base-T FD capable */
+#define PHY_L_ES_T_HD_CAP	(1<<12)	/* Bit 12:	1000Base-T HD capable */
+									/* Bit 11..0:	reserved */
+
+/*****  PHY_LONE_PORT_CFG	16 bit r/w	Port Configuration Reg *****/
+#define PHY_L_PC_REP_MODE	(1<<15)	/* Bit 15:	Repeater Mode */
+									/* Bit 14:	reserved */
+#define PHY_L_PC_TX_DIS		(1<<13)	/* Bit 13:	Tx output Disabled */
+#define PHY_L_PC_BY_SCR		(1<<12)	/* Bit 12:	Bypass Scrambler */
+#define PHY_L_PC_BY_45		(1<<11)	/* Bit 11:	Bypass 4B5B-Decoder */
+#define PHY_L_PC_JAB_DIS	(1<<10)	/* Bit 10:	Jabber Disabled */
+#define PHY_L_PC_SQE		(1<<9)	/* Bit  9:	Enable Heartbeat */
+#define PHY_L_PC_TP_LOOP	(1<<8)	/* Bit  8:	TP Loopback */
+#define PHY_L_PC_SSS		(1<<7)	/* Bit  7:	Smart Speed Selection */
+#define PHY_L_PC_FIFO_SIZE	(1<<6)	/* Bit  6:	FIFO Size */
+#define PHY_L_PC_PRE_EN		(1<<5)	/* Bit  5:	Preamble Enable */
+#define PHY_L_PC_CIM		(1<<4)	/* Bit  4:	Carrier Integrity Mon */
+#define PHY_L_PC_10_SER		(1<<3)	/* Bit  3:	Use Serial Output */
+#define PHY_L_PC_ANISOL		(1<<2)	/* Bit  2:	Unisolate Port */
+#define PHY_L_PC_TEN_BIT	(1<<1)	/* Bit  1:	10bit iface mode on */
+#define PHY_L_PC_ALTCLOCK	(1<<0)	/* Bit  0: (ro)	ALTCLOCK Mode on */
+
+/*****  PHY_LONE_Q_STAT		16 bit r/o	Quick Status Reg *****/
+#define PHY_L_QS_D_RATE		(3<<14)	/* Bit 15..14:	Data Rate */
+#define PHY_L_QS_TX_STAT	(1<<13)	/* Bit 13:	Transmitting */
+#define PHY_L_QS_RX_STAT	(1<<12)	/* Bit 12:	Receiving */
+#define PHY_L_QS_COL_STAT	(1<<11)	/* Bit 11:	Collision */
+#define PHY_L_QS_L_STAT		(1<<10)	/* Bit 10:	Link is up */
+#define PHY_L_QS_DUP_MOD	(1<<9)	/* Bit  9:	Full/Half Duplex */
+#define PHY_L_QS_AN			(1<<8)	/* Bit  8:	AutoNeg is On */
+#define PHY_L_QS_AN_C		(1<<7)	/* Bit  7:	AN is Complete */
+#define PHY_L_QS_LLE		(7<<4)	/* Bit  6:	Line Length Estim. */
+#define PHY_L_QS_PAUSE		(1<<3)	/* Bit  3:	LP advertised Pause */
+#define PHY_L_QS_AS_PAUSE	(1<<2)	/* Bit  2:	LP adv. asym. Pause */
+#define PHY_L_QS_ISOLATE	(1<<1)	/* Bit  1:	CIM Isolated */
+#define PHY_L_QS_EVENT		(1<<0)	/* Bit  0:	Event has occurred */
+
+/*****  PHY_LONE_INT_ENAB	16 bit r/w	Interrupt Enable Reg *****/
+/*****  PHY_LONE_INT_STAT	16 bit r/o	Interrupt Status Reg *****/
+									/* Bit 15..14:	reserved */
+#define PHY_L_IS_AN_F		(1<<13)	/* Bit 13:	Auto-Negotiation fault */
+									/* Bit 12:	not described */
+#define PHY_L_IS_CROSS		(1<<11)	/* Bit 11:	Crossover used */
+#define PHY_L_IS_POL		(1<<10)	/* Bit 10:	Polarity correct. used */
+#define PHY_L_IS_SS			(1<<9)	/* Bit  9:	Smart Speed Downgrade */
+#define PHY_L_IS_CFULL		(1<<8)	/* Bit  8:	Counter Full */
+#define PHY_L_IS_AN_C		(1<<7)	/* Bit  7:	AutoNeg Complete */
+#define PHY_L_IS_SPEED		(1<<6)	/* Bit  6:	Speed Changed */
+#define PHY_L_IS_DUP		(1<<5)	/* Bit  5:	Duplex Changed */
+#define PHY_L_IS_LS			(1<<4)	/* Bit  4:	Link Status Changed */
+#define PHY_L_IS_ISOL		(1<<3)	/* Bit  3:	Isolate Occured */
+#define PHY_L_IS_MDINT		(1<<2)	/* Bit  2: (ro)	STAT: MII Int Pending */
+#define PHY_L_IS_INTEN		(1<<1)	/* Bit  1:	ENAB: Enable IRQs */
+#define PHY_L_IS_FORCE		(1<<0)	/* Bit  0:	ENAB: Force Interrupt */
+
+/* int. mask */
+#define PHY_L_DEF_MSK		(PHY_L_IS_LS | PHY_L_IS_ISOL | PHY_L_IS_INTEN)
+
+/*****  PHY_LONE_LED_CFG	16 bit r/w	LED Configuration Reg *****/
+#define PHY_L_LC_LEDC		(3<<14)	/* Bit 15..14:	Col/Blink/On/Off */
+#define PHY_L_LC_LEDR		(3<<12)	/* Bit 13..12:	Rx/Blink/On/Off */
+#define PHY_L_LC_LEDT		(3<<10)	/* Bit 11..10:	Tx/Blink/On/Off */
+#define PHY_L_LC_LEDG		(3<<8)	/* Bit  9..8:	Giga/Blink/On/Off */
+#define PHY_L_LC_LEDS		(3<<6)	/* Bit  7..6:	10-100/Blink/On/Off */
+#define PHY_L_LC_LEDL		(3<<4)	/* Bit  5..4:	Link/Blink/On/Off */
+#define PHY_L_LC_LEDF		(3<<2)	/* Bit  3..2:	Duplex/Blink/On/Off */
+#define PHY_L_LC_PSTRECH	(1<<1)	/* Bit  1:	Strech LED Pulses */
+#define PHY_L_LC_FREQ		(1<<0)	/* Bit  0:	30/100 ms */
+
+/*****  PHY_LONE_PORT_CTRL	16 bit r/w	Port Control Reg *****/
+#define PHY_L_PC_TX_TCLK	(1<<15)	/* Bit 15:	Enable TX_TCLK */
+									/* Bit 14:	reserved */
+#define PHY_L_PC_ALT_NP		(1<<13)	/* Bit 14:	Alternate Next Page */
+#define PHY_L_PC_GMII_ALT	(1<<12)	/* Bit 13:	Alternate GMII driver */
+									/* Bit 11:	reserved */
+#define PHY_L_PC_TEN_CRS	(1<<10)	/* Bit 10:	Extend CRS*/
+									/* Bit  9..0:	not described */
+
+/*****  PHY_LONE_CIM		16 bit r/o	CIM Reg *****/
+#define PHY_L_CIM_ISOL		(255<<8)/* Bit 15..8:	Isolate Count */
+#define PHY_L_CIM_FALSE_CAR	(255<<0)/* Bit  7..0:	False Carrier Count */
+
+
+/*
+ * Pause Bits (PHY_L_AN_ASP and PHY_L_AN_PC) encoding
+ */
+#define PHY_L_P_NO_PAUSE	(0<<10)	/* Bit 11..10:	no Pause Mode */
+#define PHY_L_P_SYM_MD		(1<<10)	/* Bit 11..10:	symmetric Pause Mode */
+#define PHY_L_P_ASYM_MD		(2<<10)	/* Bit 11..10:	asymmetric Pause Mode */
+#define PHY_L_P_BOTH_MD		(3<<10)	/* Bit 11..10:	both Pause Mode */
+
+
+/*
+ * National-Specific
+ */
+/*****  PHY_NAT_1000T_CTRL	16 bit r/w	1000Base-T Control Reg *****/
+#define PHY_N_1000C_TEST	(7<<13)	/* Bit 15..13:	Test Modes */
+#define PHY_N_1000C_MSE		(1<<12)	/* Bit 12:	Master/Slave Enable */
+#define PHY_N_1000C_MSC		(1<<11)	/* Bit 11:	M/S Configuration */
+#define PHY_N_1000C_RD		(1<<10)	/* Bit 10:	Repeater/DTE */
+#define PHY_N_1000C_AFD		(1<<9)	/* Bit  9:	Advertise Full Duplex */
+#define PHY_N_1000C_AHD		(1<<8)	/* Bit  8:	Advertise Half Duplex */
+#define PHY_N_1000C_APC		(1<<7)	/* Bit  7:	Asymmetric Pause Cap. */
+									/* Bit  6..0:	reserved */
+
+/*****  PHY_NAT_1000T_STAT	16 bit r/o	1000Base-T Status Reg *****/
+#define PHY_N_1000S_MSF		(1<<15)	/* Bit 15:	Master/Slave Fault */
+#define PHY_N_1000S_MSR		(1<<14)	/* Bit 14:	Master/Slave Result */
+#define PHY_N_1000S_LRS		(1<<13)	/* Bit 13:	Local Receiver Status */
+#define PHY_N_1000S_RRS		(1<<12)	/* Bit 12:	Remote Receiver Status*/
+#define PHY_N_1000S_LP_FD	(1<<11)	/* Bit 11:	Link Partner can FD */
+#define PHY_N_1000S_LP_HD	(1<<10)	/* Bit 10:	Link Partner can HD */
+#define PHY_N_1000C_LP_APC	(1<<9)	/* Bit  9:	LP Asym. Pause Cap. */
+									/* Bit  8:	reserved */
+#define PHY_N_1000S_IEC		0xff	/* Bit  7..0:	Idle Error Count */
+
+/*****  PHY_NAT_EXT_STAT	16 bit r/o	Extended Status Register *****/
+#define PHY_N_ES_X_FD_CAP	(1<<15)	/* Bit 15:	1000Base-X FD capable */
+#define PHY_N_ES_X_HD_CAP	(1<<14)	/* Bit 14:	1000Base-X HD capable */
+#define PHY_N_ES_T_FD_CAP	(1<<13)	/* Bit 13:	1000Base-T FD capable */
+#define PHY_N_ES_T_HD_CAP	(1<<12)	/* Bit 12:	1000Base-T HD capable */
+									/* Bit 11..0:	reserved */
+
+/* todo: those are still missing */
+/*****  PHY_NAT_EXT_CTRL1	16 bit r/o	Extended Control Reg1 *****/
+/*****  PHY_NAT_Q_STAT1		16 bit r/o	Quick Status Reg1 *****/
+/*****  PHY_NAT_10B_OP		16 bit r/o	10Base-T Operations Reg *****/
+/*****  PHY_NAT_EXT_CTRL2	16 bit r/o	Extended Control Reg1 *****/
+/*****  PHY_NAT_Q_STAT2		16 bit r/o	Quick Status Reg2 *****/
+/*****  PHY_NAT_PHY_ADDR	16 bit r/o	PHY Address Register *****/
+
+/*
+ * Marvell-Specific
+ */
+/*****  PHY_MARV_AUNE_ADV	16 bit r/w	Auto-Negotiation Advertisement *****/
+/*****  PHY_MARV_AUNE_LP	16 bit r/w	Link Part Ability Reg *****/
+#define PHY_M_AN_NXT_PG		BIT_15	/* Request Next Page */
+#define PHY_M_AN_ACK		BIT_14	/* (ro)	Acknowledge Received */
+#define PHY_M_AN_RF			BIT_13	/* Remote Fault */
+									/* Bit 12:	reserved */
+#define PHY_M_AN_ASP		BIT_11	/* Asymmetric Pause */
+#define PHY_M_AN_PC			BIT_10	/* MAC Pause implemented */
+#define PHY_M_AN_100_FD		BIT_8	/* Advertise 100Base-TX Full Duplex */
+#define PHY_M_AN_100_HD		BIT_7	/* Advertise 100Base-TX Half Duplex */
+#define PHY_M_AN_10_FD		BIT_6	/* Advertise 10Base-TX Full Duplex */
+#define PHY_M_AN_10_HD		BIT_5	/* Advertise 10Base-TX Half Duplex */
+
+/* special defines for FIBER (88E1011S only) */
+#define PHY_M_AN_ASP_X		BIT_8	/* Asymmetric Pause */
+#define PHY_M_AN_PC_X		BIT_7	/* MAC Pause implemented */
+#define PHY_M_AN_1000X_AHD	BIT_6	/* Advertise 10000Base-X Half Duplex */
+#define PHY_M_AN_1000X_AFD	BIT_5	/* Advertise 10000Base-X Full Duplex */
+
+/* Pause Bits (PHY_M_AN_ASP_X and PHY_M_AN_PC_X) encoding */
+#define PHY_M_P_NO_PAUSE_X	(0<<7)	/* Bit  8.. 7:	no Pause Mode */
+#define PHY_M_P_SYM_MD_X	(1<<7)	/* Bit  8.. 7:	symmetric Pause Mode */
+#define PHY_M_P_ASYM_MD_X	(2<<7)	/* Bit  8.. 7:	asymmetric Pause Mode */
+#define PHY_M_P_BOTH_MD_X	(3<<7)	/* Bit  8.. 7:	both Pause Mode */
+
+/*****  PHY_MARV_1000T_CTRL	16 bit r/w	1000Base-T Control Reg *****/
+#define PHY_M_1000C_TEST	(7<<13)	/* Bit 15..13:	Test Modes */
+#define PHY_M_1000C_MSE		(1<<12)	/* Bit 12:	Manual Master/Slave Enable */
+#define PHY_M_1000C_MSC		(1<<11)	/* Bit 11:	M/S Configuration (1=Master) */
+#define PHY_M_1000C_MPD		(1<<10)	/* Bit 10:	Multi-Port Device */
+#define PHY_M_1000C_AFD		(1<<9)	/* Bit  9:	Advertise Full Duplex */
+#define PHY_M_1000C_AHD		(1<<8)	/* Bit  8:	Advertise Half Duplex */
+									/* Bit  7..0:	reserved */
+
+/*****  PHY_MARV_PHY_CTRL	16 bit r/w	PHY Specific Ctrl Reg *****/
+#define PHY_M_PC_TX_FFD_MSK	(3<<14)	/* Bit 15..14:	Tx FIFO Depth Mask */
+#define PHY_M_PC_RX_FFD_MSK	(3<<12)	/* Bit 13..12:	Rx FIFO Depth Mask */
+#define PHY_M_PC_ASS_CRS_TX	(1<<11)	/* Bit 11:	Assert CRS on Transmit */
+#define PHY_M_PC_FL_GOOD	(1<<10)	/* Bit 10:	Force Link Good */
+#define PHY_M_PC_EN_DET_MSK	(3<<8)	/* Bit  9.. 8:	Energy Detect Mask */
+#define PHY_M_PC_ENA_EXT_D	(1<<7)	/* Bit  7:	Enable Ext. Distance (10BT) */
+#define PHY_M_PC_MDIX_MSK	(3<<5)	/* Bit  6.. 5:	MDI/MDIX Config. Mask */
+#define PHY_M_PC_DIS_125CLK	(1<<4)	/* Bit  4:	Disable 125 CLK */
+#define PHY_M_PC_MAC_POW_UP	(1<<3)	/* Bit  3:	MAC Power up */
+#define PHY_M_PC_SQE_T_ENA	(1<<2)	/* Bit  2:	SQE Test Enabled */
+#define PHY_M_PC_POL_R_DIS	(1<<1)	/* Bit  1:	Polarity Reversal Disabled */
+#define PHY_M_PC_DIS_JABBER	(1<<0)	/* Bit  0:	Disable Jabber */
+
+#define PHY_M_PC_EN_DET			SHIFT8(2)	/* Energy Detect (Mode 1) */
+#define PHY_M_PC_EN_DET_PLUS	SHIFT8(3)	/* Energy Detect Plus (Mode 2) */
+
+#define PHY_M_PC_MDI_XMODE(x)	SHIFT5(x)	
+#define PHY_M_PC_MAN_MDI	0    	/* 00 = Manual MDI configuration */
+#define PHY_M_PC_MAN_MDIX	1		/* 01 = Manual MDIX configuration */
+#define PHY_M_PC_ENA_AUTO	3		/* 11 = Enable Automatic Crossover */
+
+/*****  PHY_MARV_PHY_STAT	16 bit r/o	PHY Specific Status Reg *****/
+#define PHY_M_PS_SPEED_MSK	(3<<14)	/* Bit 15..14:	Speed Mask */
+#define PHY_M_PS_SPEED_1000	(1<<15)	/*       10 = 1000 Mbps */
+#define PHY_M_PS_SPEED_100	(1<<14)	/*       01 =  100 Mbps */
+#define PHY_M_PS_SPEED_10	0		/*       00 =   10 Mbps */
+#define PHY_M_PS_FULL_DUP	(1<<13)	/* Bit 13:	Full Duplex */
+#define PHY_M_PS_PAGE_REC	(1<<12)	/* Bit 12:	Page Received */
+#define PHY_M_PS_SPDUP_RES	(1<<11)	/* Bit 11:	Speed & Duplex Resolved */
+#define PHY_M_PS_LINK_UP	(1<<10)	/* Bit 10:	Link Up */
+#define PHY_M_PS_CABLE_MSK	(3<<7)	/* Bit  9.. 7:	Cable Length Mask */
+#define PHY_M_PS_MDI_X_STAT	(1<<6)	/* Bit  6:	MDI Crossover Stat (1=MDIX) */
+#define PHY_M_PS_DOWNS_STAT	(1<<5)	/* Bit  5:	Downshift Status (1=downsh.) */
+#define PHY_M_PS_ENDET_STAT	(1<<4)	/* Bit  4:	Energy Detect Status (1=act) */
+#define PHY_M_PS_TX_P_EN	(1<<3)	/* Bit  3:	Tx Pause Enabled */
+#define PHY_M_PS_RX_P_EN	(1<<2)	/* Bit  2:	Rx Pause Enabled */
+#define PHY_M_PS_POL_REV	(1<<1)	/* Bit  1:	Polarity Reversed */
+#define PHY_M_PC_JABBER		(1<<0)	/* Bit  0:	Jabber */
+
+#define PHY_M_PS_PAUSE_MSK	(PHY_M_PS_TX_P_EN | PHY_M_PS_RX_P_EN)
+
+/*****  PHY_MARV_INT_MASK	16 bit r/w	Interrupt Mask Reg *****/
+/*****  PHY_MARV_INT_STAT	16 bit r/o	Interrupt Status Reg *****/
+#define PHY_M_IS_AN_ERROR	(1<<15)	/* Bit 15:	Auto-Negotiation Error */
+#define PHY_M_IS_LSP_CHANGE	(1<<14)	/* Bit 14:	Link Speed Changed */
+#define PHY_M_IS_DUP_CHANGE	(1<<13)	/* Bit 13:	Duplex Mode Changed */
+#define PHY_M_IS_AN_PR		(1<<12)	/* Bit 12:	Page Received */
+#define PHY_M_IS_AN_COMPL	(1<<11)	/* Bit 11:	Auto-Negotiation Completed */
+#define PHY_M_IS_LST_CHANGE	(1<<10)	/* Bit 10:	Link Status Changed */
+#define PHY_M_IS_SYMB_ERROR	(1<<9)	/* Bit  9:	Symbol Error */
+#define PHY_M_IS_FALSE_CARR	(1<<8)	/* Bit  8:	False Carrier */
+#define PHY_M_IS_FIFO_ERROR	(1<<7)	/* Bit  7:	FIFO Overflow/Underrun Error */
+#define PHY_M_IS_MDI_CHANGE	(1<<6)	/* Bit  6:	MDI Crossover Changed */
+#define PHY_M_IS_DOWNSH_DET	(1<<5)	/* Bit  5:	Downshift Detected */
+#define PHY_M_IS_END_CHANGE	(1<<4)	/* Bit  4:	Energy Detect Changed */
+									/* Bit  3..2:	reserved */
+#define PHY_M_IS_POL_CHANGE	(1<<1)	/* Bit  1:	Polarity Changed */
+#define PHY_M_IS_JABBER		(1<<0)	/* Bit  0:	Jabber */
+
+#define PHY_M_DEF_MSK		(PHY_M_IS_AN_ERROR | PHY_M_IS_AN_PR | \
+							PHY_M_IS_LST_CHANGE | PHY_M_IS_FIFO_ERROR)
+
+/*****  PHY_MARV_EXT_CTRL	16 bit r/w	Ext. PHY Specific Ctrl *****/
+#define PHY_M_EC_M_DSC_MSK	(3<<10)	/* Bit 11..10:	Master downshift counter */
+#define PHY_M_EC_S_DSC_MSK	(3<<8)	/* Bit  9.. 8:	Slave  downshift counter */
+#define PHY_M_EC_MAC_S_MSK	(7<<4)	/* Bit  6.. 4:	Def. MAC interface speed */
+#define PHY_M_EC_FIB_AN_ENA	(1<<3)	/* Bit  3:	Fiber Auto-Neg. Enable */
+
+#define PHY_M_EC_M_DSC(x)		SHIFT10(x)	/* 00=1x; 01=2x; 10=3x; 11=4x */
+#define PHY_M_EC_S_DSC(x)		SHIFT8(x)	/* 00=dis; 01=1x; 10=2x; 11=3x */
+#define PHY_M_EC_MAC_S(x)		SHIFT4(x)	/* 01X=0; 110=2.5; 111=25 (MHz) */
+
+#define MAC_TX_CLK_0_MHZ	2
+#define MAC_TX_CLK_2_5_MHZ	6
+#define MAC_TX_CLK_25_MHZ	7
+
+/*****  PHY_MARV_LED_CTRL	16 bit r/w	LED Control Reg *****/
+#define PHY_M_LEDC_DIS_LED	(1<<15)	/* Bit 15:	Disable LED */
+#define PHY_M_LEDC_PULS_MSK	(7<<12)	/* Bit 14..12:  Pulse Stretch Mask */
+#define PHY_M_LEDC_F_INT	(1<<11)	/* Bit 11:	Force Interrupt */
+#define PHY_M_LEDC_BL_R_MSK	(7<<8)	/* Bit 10.. 8:  Blink Rate Mask */
+									/* Bit  7.. 5:	reserved */
+#define PHY_M_LEDC_LINK_MSK	(3<<3)	/* Bit  4.. 3:	Link Control Mask */
+#define PHY_M_LEDC_DP_CTRL	(1<<2)	/* Bit  2:	Duplex Control */
+#define PHY_M_LEDC_RX_CTRL	(1<<1)	/* Bit  1:	Rx activity / Link */
+#define PHY_M_LEDC_TX_CTRL	(1<<0)	/* Bit  0:	Tx activity / Link */
+
+#define PHY_M_LED_PULS_DUR(x)	SHIFT12(x)	/* Pulse Stretch Duration */
+
+#define	PULS_NO_STR		0		/* no pulse stretching */
+#define	PULS_21MS		1		/* 21 ms to 42 ms */
+#define PULS_42MS		2		/* 42 ms to 84 ms */
+#define PULS_84MS		3		/* 84 ms to 170 ms */
+#define PULS_170MS		4		/* 170 ms to 340 ms */
+#define PULS_340MS		5		/* 340 ms to 670 ms */
+#define PULS_670MS		6		/* 670 ms to 1.3 s */
+#define PULS_1300MS		7		/* 1.3 s to 2.7 s */
+
+#define PHY_M_LED_BLINK_RT(x)	SHIFT8(x)	/* Blink Rate */
+
+#define BLINK_42MS		0		/* 42 ms */
+#define BLINK_84MS		1		/* 84 ms */
+#define BLINK_170MS		2		/* 170 ms */
+#define BLINK_340MS		3		/* 340 ms */
+#define BLINK_670MS		4		/* 670 ms */
+								/* values 5 - 7: reserved */
+
+/*****  PHY_MARV_LED_OVER	16 bit r/w	Manual LED Override Reg *****/
+#define PHY_M_LED_MO_DUP(x)		SHIFT10(x)	/* Bit 11..10:  Duplex */
+#define PHY_M_LED_MO_10(x)		SHIFT8(x)	/* Bit  9.. 8:  Link 10 */
+#define PHY_M_LED_MO_100(x)		SHIFT6(x)	/* Bit  7.. 6:  Link 100 */
+#define PHY_M_LED_MO_1000(x)	SHIFT4(x)	/* Bit  5.. 4:  Link 1000 */
+#define PHY_M_LED_MO_RX(x)		SHIFT2(x)	/* Bit  3.. 2:  Rx */
+#define PHY_M_LED_MO_TX(x)		SHIFT0(x)	/* Bit  1.. 0:  Tx */
+
+#define MO_LED_NORM			0
+#define MO_LED_BLINK		1
+#define MO_LED_OFF			2
+#define MO_LED_ON			3
+
+/*****  PHY_MARV_EXT_CTRL_2	16 bit r/w	Ext. PHY Specific Ctrl 2 *****/
+									/* Bit 15.. 7:	reserved */
+#define PHY_M_EC2_FI_IMPED	(1<<6)	/* Bit  6:	Fiber Input  Impedance */
+#define PHY_M_EC2_FO_IMPED	(1<<5)	/* Bit  5:	Fiber Output Impedance */
+#define PHY_M_EC2_FO_M_CLK	(1<<4)	/* Bit  4:	Fiber Mode Clock Enable */
+#define PHY_M_EC2_FO_BOOST	(1<<3)	/* Bit  3:	Fiber Output Boost */
+#define PHY_M_EC2_FO_AM_MSK	7		/* Bit  2.. 0:	Fiber Output Amplitude */
+
+/*****	PHY_MARV_EXT_P_STAT 16 bit r/w	Ext. PHY Specific Status *****/
+#define PHY_M_FC_AUTO_SEL	(1<<15)	/* Bit 15:	Fiber/Copper Auto Sel. dis. */
+#define PHY_M_FC_AN_REG_ACC (1<<14) /* Bit 14:	Fiber/Copper Autoneg. reg acc */
+#define PHY_M_FC_RESULUTION (1<<13)	/* Bit 13:	Fiber/Copper Resulution */
+#define PHY_M_SER_IF_AN_BP  (1<<12) /* Bit 12:	Ser IF autoneg. bypass enable */
+#define PHY_M_SER_IF_BP_ST	(1<<11) /* Bit 11:	Ser IF autoneg. bypass status */
+#define PHY_M_IRQ_POLARITY	(1<<10) /* Bit 10:	IRQ polarity */
+									/* Bit 9..4: reserved */
+#define PHY_M_UNDOC1		(1<< 7) /* undocumented bit !! */
+#define PHY_M_MODE_MASK		(0xf<<0)/* Bit 3..0: copy of HWCFG MODE[3:0] */
+
+
+/*****  PHY_MARV_CABLE_DIAG	16 bit r/o	Cable Diagnostic Reg *****/
+#define PHY_M_CABD_ENA_TEST	(1<<15)	/* Bit 15:	Enable Test */
+#define PHY_M_CABD_STAT_MSK	(3<<13)	/* Bit 14..13:	Status */
+									/* Bit 12.. 8:	reserved */
+#define PHY_M_CABD_DIST_MSK	0xff	/* Bit  7.. 0:	Distance */
+
+/* values for Cable Diagnostic Status (11=fail; 00=OK; 10=open; 01=short) */
+#define CABD_STAT_NORMAL	0
+#define CABD_STAT_SHORT		1
+#define CABD_STAT_OPEN		2
+#define CABD_STAT_FAIL		3
+
+
+/*
+ * GMAC registers
+ *
+ * The GMAC registers are 16 or 32 bits wide.
+ * The GMACs host processor interface is 16 bits wide,
+ * therefore ALL registers will be addressed with 16 bit accesses.
+ *
+ * The following macros are provided to access the GMAC registers
+ * GM_IN16(), GM_OUT16, GM_IN32(), GM_OUT32(), GM_INADR(), GM_OUTADR(),
+ * GM_INHASH(), and GM_OUTHASH().
+ * The macros are defined in SkGeHw.h.
+ *
+ * Note:	NA reg	= Network Address e.g DA, SA etc.
+ *
+ */
+
+/* Port Registers */
+#define GM_GP_STAT		0x0000		/* 16 bit r/o	General Purpose Status */
+#define GM_GP_CTRL		0x0004		/* 16 bit r/w	General Purpose Control */
+#define GM_TX_CTRL		0x0008		/* 16 bit r/w	Transmit Control Reg. */
+#define GM_RX_CTRL		0x000c		/* 16 bit r/w	Receive Control Reg. */
+#define GM_TX_FLOW_CTRL	0x0010		/* 16 bit r/w	Transmit Flow-Control */
+#define GM_TX_PARAM		0x0014		/* 16 bit r/w	Transmit Parameter Reg. */
+#define GM_SERIAL_MODE	0x0018		/* 16 bit r/w	Serial Mode Register */
+
+/* Source Address Registers */
+#define GM_SRC_ADDR_1L	0x001c		/* 16 bit r/w	Source Address 1 (low) */
+#define GM_SRC_ADDR_1M	0x0020		/* 16 bit r/w	Source Address 1 (middle) */
+#define GM_SRC_ADDR_1H	0x0024		/* 16 bit r/w	Source Address 1 (high) */
+#define GM_SRC_ADDR_2L	0x0028		/* 16 bit r/w	Source Address 2 (low) */
+#define GM_SRC_ADDR_2M	0x002c		/* 16 bit r/w	Source Address 2 (middle) */
+#define GM_SRC_ADDR_2H	0x0030		/* 16 bit r/w	Source Address 2 (high) */
+
+/* Multicast Address Hash Registers */
+#define GM_MC_ADDR_H1	0x0034		/* 16 bit r/w	Multicast Address Hash 1 */
+#define GM_MC_ADDR_H2	0x0038		/* 16 bit r/w	Multicast Address Hash 2 */
+#define GM_MC_ADDR_H3	0x003c		/* 16 bit r/w	Multicast Address Hash 3 */
+#define GM_MC_ADDR_H4	0x0040		/* 16 bit r/w	Multicast Address Hash 4 */
+
+/* Interrupt Source Registers */
+#define GM_TX_IRQ_SRC	0x0044		/* 16 bit r/o	Tx Overflow IRQ Source */
+#define GM_RX_IRQ_SRC	0x0048		/* 16 bit r/o	Rx Overflow IRQ Source */
+#define GM_TR_IRQ_SRC	0x004c		/* 16 bit r/o	Tx/Rx Over. IRQ Source */
+
+/* Interrupt Mask Registers */
+#define GM_TX_IRQ_MSK	0x0050		/* 16 bit r/w	Tx Overflow IRQ Mask */
+#define GM_RX_IRQ_MSK	0x0054		/* 16 bit r/w	Rx Overflow IRQ Mask */
+#define GM_TR_IRQ_MSK	0x0058		/* 16 bit r/w	Tx/Rx Over. IRQ Mask */
+
+/* Serial Management Interface (SMI) Registers */
+#define GM_SMI_CTRL		0x0080		/* 16 bit r/w	SMI Control Register */
+#define GM_SMI_DATA		0x0084		/* 16 bit r/w	SMI Data Register */
+#define GM_PHY_ADDR		0x0088		/* 16 bit r/w	GPHY Address Register */
+
+/* MIB Counters */
+#define GM_MIB_CNT_BASE	0x0100		/* Base Address of MIB Counters */
+#define GM_MIB_CNT_SIZE	44			/* Number of MIB Counters */
+
+/*
+ * MIB Counters base address definitions (low word) -
+ * use offset 4 for access to high word	(32 bit r/o)
+ */
+#define GM_RXF_UC_OK \
+			(GM_MIB_CNT_BASE + 0)	/* Unicast Frames Received OK */
+#define GM_RXF_BC_OK \
+			(GM_MIB_CNT_BASE + 8)	/* Broadcast Frames Received OK */
+#define GM_RXF_MPAUSE \
+			(GM_MIB_CNT_BASE + 16)	/* Pause MAC Ctrl Frames Received */
+#define GM_RXF_MC_OK \
+			(GM_MIB_CNT_BASE + 24)	/* Multicast Frames Received OK */
+#define GM_RXF_FCS_ERR \
+			(GM_MIB_CNT_BASE + 32)	/* Rx Frame Check Seq. Error */
+	/* GM_MIB_CNT_BASE + 40:	reserved */
+#define GM_RXO_OK_LO \
+			(GM_MIB_CNT_BASE + 48)	/* Octets Received OK Low */
+#define GM_RXO_OK_HI \
+			(GM_MIB_CNT_BASE + 56)	/* Octets Received OK High */
+#define GM_RXO_ERR_LO \
+			(GM_MIB_CNT_BASE + 64)	/* Octets Received Invalid Low */
+#define GM_RXO_ERR_HI \
+			(GM_MIB_CNT_BASE + 72)	/* Octets Received Invalid High */
+#define GM_RXF_SHT \
+			(GM_MIB_CNT_BASE + 80)	/* Frames <64 Byte Received OK */
+#define GM_RXE_FRAG \
+			(GM_MIB_CNT_BASE + 88)	/* Frames <64 Byte Received with FCS Err */
+#define GM_RXF_64B \
+			(GM_MIB_CNT_BASE + 96)	/* 64 Byte Rx Frame */
+#define GM_RXF_127B \
+			(GM_MIB_CNT_BASE + 104)	/* 65-127 Byte Rx Frame */
+#define GM_RXF_255B \
+			(GM_MIB_CNT_BASE + 112)	/* 128-255 Byte Rx Frame */
+#define GM_RXF_511B \
+			(GM_MIB_CNT_BASE + 120)	/* 256-511 Byte Rx Frame */
+#define GM_RXF_1023B \
+			(GM_MIB_CNT_BASE + 128)	/* 512-1023 Byte Rx Frame */
+#define GM_RXF_1518B \
+			(GM_MIB_CNT_BASE + 136)	/* 1024-1518 Byte Rx Frame */
+#define GM_RXF_MAX_SZ \
+			(GM_MIB_CNT_BASE + 144)	/* 1519-MaxSize Byte Rx Frame */
+#define GM_RXF_LNG_ERR \
+			(GM_MIB_CNT_BASE + 152)	/* Rx Frame too Long Error */
+#define GM_RXF_JAB_PKT \
+			(GM_MIB_CNT_BASE + 160)	/* Rx Jabber Packet Frame */
+	/* GM_MIB_CNT_BASE + 168:	reserved */
+#define GM_RXE_FIFO_OV \
+			(GM_MIB_CNT_BASE + 176)	/* Rx FIFO overflow Event */
+	/* GM_MIB_CNT_BASE + 184:	reserved */
+#define GM_TXF_UC_OK \
+			(GM_MIB_CNT_BASE + 192)	/* Unicast Frames Xmitted OK */
+#define GM_TXF_BC_OK \
+			(GM_MIB_CNT_BASE + 200)	/* Broadcast Frames Xmitted OK */
+#define GM_TXF_MPAUSE \
+			(GM_MIB_CNT_BASE + 208)	/* Pause MAC Ctrl Frames Xmitted */
+#define GM_TXF_MC_OK \
+			(GM_MIB_CNT_BASE + 216)	/* Multicast Frames Xmitted OK */
+#define GM_TXO_OK_LO \
+			(GM_MIB_CNT_BASE + 224)	/* Octets Transmitted OK Low */
+#define GM_TXO_OK_HI \
+			(GM_MIB_CNT_BASE + 232)	/* Octets Transmitted OK High */
+#define GM_TXF_64B \
+			(GM_MIB_CNT_BASE + 240)	/* 64 Byte Tx Frame */
+#define GM_TXF_127B \
+			(GM_MIB_CNT_BASE + 248)	/* 65-127 Byte Tx Frame */
+#define GM_TXF_255B \
+			(GM_MIB_CNT_BASE + 256)	/* 128-255 Byte Tx Frame */
+#define GM_TXF_511B \
+			(GM_MIB_CNT_BASE + 264)	/* 256-511 Byte Tx Frame */
+#define GM_TXF_1023B \
+			(GM_MIB_CNT_BASE + 272)	/* 512-1023 Byte Tx Frame */
+#define GM_TXF_1518B \
+			(GM_MIB_CNT_BASE + 280)	/* 1024-1518 Byte Tx Frame */
+#define GM_TXF_MAX_SZ \
+			(GM_MIB_CNT_BASE + 288)	/* 1519-MaxSize Byte Tx Frame */
+	/* GM_MIB_CNT_BASE + 296:	reserved */
+#define GM_TXF_COL \
+			(GM_MIB_CNT_BASE + 304)	/* Tx Collision */
+#define GM_TXF_LAT_COL \
+			(GM_MIB_CNT_BASE + 312)	/* Tx Late Collision */
+#define GM_TXF_ABO_COL \
+			(GM_MIB_CNT_BASE + 320)	/* Tx aborted due to Exces. Col. */
+#define GM_TXF_MUL_COL \
+			(GM_MIB_CNT_BASE + 328)	/* Tx Multiple Collision */
+#define GM_TXF_SNG_COL \
+			(GM_MIB_CNT_BASE + 336)	/* Tx Single Collision */
+#define GM_TXE_FIFO_UR \
+			(GM_MIB_CNT_BASE + 344)	/* Tx FIFO Underrun Event */
+
+/*----------------------------------------------------------------------------*/
+/*
+ * GMAC Bit Definitions
+ *
+ * If the bit access behaviour differs from the register access behaviour
+ * (r/w, r/o) this is documented after the bit number.
+ * The following bit access behaviours are used:
+ *	(sc)	self clearing
+ *	(r/o)	read only
+ */
+
+/*	GM_GP_STAT	16 bit r/o	General Purpose Status Register */
+#define GM_GPSR_SPEED		(1<<15) /* Bit 15:	Port Speed (1 = 100 Mbps) */
+#define GM_GPSR_DUPLEX		(1<<14) /* Bit 14:	Duplex Mode (1 = Full) */
+#define GM_GPSR_FC_TX_DIS	(1<<13) /* Bit 13:	Tx Flow-Control Mode Disabled */
+#define GM_GPSR_LINK_UP		(1<<12)	/* Bit 12:	Link Up Status */
+#define GM_GPSR_PAUSE		(1<<11)	/* Bit 11:	Pause State */
+#define GM_GPSR_TX_ACTIVE	(1<<10)	/* Bit 10:	Tx in Progress */
+#define GM_GPSR_EXC_COL		(1<<9)	/* Bit  9:	Excessive Collisions Occured */
+#define GM_GPSR_LAT_COL		(1<<8)	/* Bit  8:	Late Collisions Occured */
+								/* Bit  7..6:	reserved */
+#define GM_GPSR_PHY_ST_CH	(1<<5)	/* Bit  5:	PHY Status Change */
+#define GM_GPSR_GIG_SPEED	(1<<4)	/* Bit  4:	Gigabit Speed (1 = 1000 Mbps) */
+#define GM_GPSR_PART_MODE	(1<<3)	/* Bit  3:	Partition mode */
+#define GM_GPSR_FC_RX_DIS	(1<<2)	/* Bit  2:	Rx Flow-Control Mode Disabled */
+#define GM_GPSR_PROM_EN		(1<<1)	/* Bit  1:	Promiscuous Mode Enabled */
+								/* Bit  0:	reserved */
+	
+/*	GM_GP_CTRL	16 bit r/w	General Purpose Control Register */
+								/* Bit 15:	reserved */
+#define GM_GPCR_PROM_ENA	(1<<14)	/* Bit 14:	Enable Promiscuous Mode */
+#define GM_GPCR_FC_TX_DIS	(1<<13) /* Bit 13:	Disable Tx Flow-Control Mode */
+#define GM_GPCR_TX_ENA		(1<<12) /* Bit 12:	Enable Transmit */
+#define GM_GPCR_RX_ENA		(1<<11) /* Bit 11:	Enable Receive */
+#define GM_GPCR_BURST_ENA	(1<<10)	/* Bit 10:	Enable Burst Mode */
+#define GM_GPCR_LOOP_ENA	(1<<9)	/* Bit  9:	Enable MAC Loopback Mode */
+#define GM_GPCR_PART_ENA	(1<<8)	/* Bit  8:	Enable Partition Mode */
+#define GM_GPCR_GIGS_ENA	(1<<7)	/* Bit  7:	Gigabit Speed (1000 Mbps) */
+#define GM_GPCR_FL_PASS		(1<<6)	/* Bit  6:	Force Link Pass */
+#define GM_GPCR_DUP_FULL	(1<<5)	/* Bit  5:	Full Duplex Mode */
+#define GM_GPCR_FC_RX_DIS	(1<<4)	/* Bit  4:	Disable Rx Flow-Control Mode */
+#define GM_GPCR_SPEED_100	(1<<3)  /* Bit  3:	Port Speed 100 Mbps */
+#define GM_GPCR_AU_DUP_DIS	(1<<2)	/* Bit  2:	Disable Auto-Update Duplex */
+#define GM_GPCR_AU_FCT_DIS	(1<<1)	/* Bit  1:	Disable Auto-Update Flow-C. */
+#define GM_GPCR_AU_SPD_DIS	(1<<0)	/* Bit  0:	Disable Auto-Update Speed */
+
+#define GM_GPCR_SPEED_1000	(GM_GPCR_GIGS_ENA | GM_GPCR_SPEED_100)
+#define GM_GPCR_AU_ALL_DIS	(GM_GPCR_AU_DUP_DIS | GM_GPCR_AU_FCT_DIS |\
+							 GM_GPCR_AU_SPD_DIS)
+	
+/*	GM_TX_CTRL				16 bit r/w	Transmit Control Register */
+#define GM_TXCR_FORCE_JAM	(1<<15)	/* Bit 15:	Force Jam / Flow-Control */
+#define GM_TXCR_CRC_DIS		(1<<14)	/* Bit 14:	Disable insertion of CRC */
+#define GM_TXCR_PAD_DIS		(1<<13)	/* Bit 13:	Disable padding of packets */
+#define GM_TXCR_COL_THR_MSK	(7<<10)	/* Bit 12..10:	Collision Threshold */
+
+#define TX_COL_THR(x)		(SHIFT10(x) & GM_TXCR_COL_THR_MSK)
+
+#define TX_COL_DEF			0x04
+	
+/*	GM_RX_CTRL				16 bit r/w	Receive Control Register */
+#define GM_RXCR_UCF_ENA		(1<<15)	/* Bit 15:	Enable Unicast filtering */
+#define GM_RXCR_MCF_ENA		(1<<14)	/* Bit 14:	Enable Multicast filtering */
+#define GM_RXCR_CRC_DIS		(1<<13)	/* Bit 13:	Remove 4-byte CRC */
+#define GM_RXCR_PASS_FC		(1<<12)	/* Bit 12:	Pass FC packets to FIFO */
+	
+/*	GM_TX_PARAM				16 bit r/w	Transmit Parameter Register */
+#define GM_TXPA_JAMLEN_MSK	(0x03<<14)	/* Bit 15..14:	Jam Length */
+#define GM_TXPA_JAMIPG_MSK	(0x1f<<9)	/* Bit 13..9:	Jam IPG */
+#define GM_TXPA_JAMDAT_MSK	(0x1f<<4)	/* Bit  8..4:	IPG Jam to Data */
+								/* Bit  3..0:	reserved */
+
+#define TX_JAM_LEN_VAL(x)	(SHIFT14(x) & GM_TXPA_JAMLEN_MSK)
+#define TX_JAM_IPG_VAL(x)	(SHIFT9(x) & GM_TXPA_JAMIPG_MSK)
+#define TX_IPG_JAM_DATA(x)	(SHIFT4(x) & GM_TXPA_JAMDAT_MSK)
+
+#define TX_JAM_LEN_DEF		0x03
+#define TX_JAM_IPG_DEF		0x0b
+#define TX_IPG_JAM_DEF		0x1c
+
+/*	GM_SERIAL_MODE			16 bit r/w	Serial Mode Register */
+#define GM_SMOD_DATABL_MSK	(0x1f<<11)	/* Bit 15..11:	Data Blinder (r/o) */
+#define GM_SMOD_LIMIT_4		(1<<10)	/* Bit 10:	4 consecutive Tx trials */
+#define GM_SMOD_VLAN_ENA	(1<<9)	/* Bit  9:	Enable VLAN  (Max. Frame Len) */
+#define GM_SMOD_JUMBO_ENA	(1<<8)	/* Bit  8:	Enable Jumbo (Max. Frame Len) */
+								/* Bit  7..5:	reserved */
+#define GM_SMOD_IPG_MSK		0x1f	/* Bit 4..0:	Inter-Packet Gap (IPG) */
+	
+#define DATA_BLIND_VAL(x)	(SHIFT11(x) & GM_SMOD_DATABL_MSK)
+#define DATA_BLIND_DEF		0x04
+
+#define IPG_DATA_VAL(x)		(x & GM_SMOD_IPG_MSK)
+#define IPG_DATA_DEF		0x1e
+
+/*	GM_SMI_CTRL				16 bit r/w	SMI Control Register */
+#define GM_SMI_CT_PHY_A_MSK	(0x1f<<11)	/* Bit 15..11:	PHY Device Address */
+#define GM_SMI_CT_REG_A_MSK	(0x1f<<6)	/* Bit 10.. 6:	PHY Register Address */
+#define GM_SMI_CT_OP_RD		(1<<5)	/* Bit  5:	OpCode Read (0=Write)*/
+#define GM_SMI_CT_RD_VAL	(1<<4)	/* Bit  4:	Read Valid (Read completed) */
+#define GM_SMI_CT_BUSY		(1<<3)	/* Bit  3:	Busy (Operation in progress) */
+								/* Bit   2..0:	reserved */
+	
+#define GM_SMI_CT_PHY_AD(x)	(SHIFT11(x) & GM_SMI_CT_PHY_A_MSK)
+#define GM_SMI_CT_REG_AD(x)	(SHIFT6(x) & GM_SMI_CT_REG_A_MSK)
+
+	/*	GM_PHY_ADDR				16 bit r/w	GPHY Address Register */
+								/* Bit  15..6:	reserved */
+#define GM_PAR_MIB_CLR		(1<<5)	/* Bit  5:	Set MIB Clear Counter Mode */
+#define GM_PAR_MIB_TST		(1<<4)	/* Bit  4:	MIB Load Counter (Test Mode) */
+								/* Bit   3..0:	reserved */
+	
+/* Receive Frame Status Encoding */
+#define GMR_FS_LEN	(0xffffUL<<16)	/* Bit 31..16:	Rx Frame Length */
+								/* Bit  15..14:	reserved */
+#define GMR_FS_VLAN		(1L<<13)	/* Bit 13:	VLAN Packet */
+#define GMR_FS_JABBER	(1L<<12)	/* Bit 12:	Jabber Packet */
+#define GMR_FS_UN_SIZE	(1L<<11)	/* Bit 11:	Undersize Packet */
+#define GMR_FS_MC		(1L<<10)	/* Bit 10:	Multicast Packet */
+#define GMR_FS_BC		(1L<<9)		/* Bit  9:	Broadcast Packet */
+#define GMR_FS_RX_OK	(1L<<8)		/* Bit  8:	Receive OK (Good Packet) */
+#define GMR_FS_GOOD_FC	(1L<<7)		/* Bit  7:	Good Flow-Control Packet */
+#define GMR_FS_BAD_FC	(1L<<6)		/* Bit  6:	Bad  Flow-Control Packet */
+#define GMR_FS_MII_ERR	(1L<<5)		/* Bit  5:	MII Error */
+#define GMR_FS_LONG_ERR	(1L<<4)		/* Bit  4:	Too Long Packet */
+#define GMR_FS_FRAGMENT	(1L<<3)		/* Bit  3:	Fragment */
+								/* Bit  2:	reserved */
+#define GMR_FS_CRC_ERR	(1L<<1)		/* Bit  1:	CRC Error */
+#define GMR_FS_RX_FF_OV	(1L<<0)		/* Bit  0:	Rx FIFO Overflow */
+
+/*
+ * GMR_FS_ANY_ERR (analogous to XMR_FS_ANY_ERR)
+ */
+#define GMR_FS_ANY_ERR	(GMR_FS_CRC_ERR | \
+			GMR_FS_LONG_ERR | \
+			GMR_FS_MII_ERR | \
+			GMR_FS_BAD_FC | \
+			GMR_FS_GOOD_FC | \
+			GMR_FS_JABBER)
+
+/* Rx GMAC FIFO Flush Mask (default) */
+#define RX_FF_FL_DEF_MSK	(GMR_FS_CRC_ERR | \
+			GMR_FS_RX_FF_OV | \
+			GMR_FS_MII_ERR | \
+			GMR_FS_BAD_FC | \
+			GMR_FS_GOOD_FC | \
+			GMR_FS_UN_SIZE | \
+			GMR_FS_JABBER)
+
+/* typedefs *******************************************************************/
+
+
+/* function prototypes ********************************************************/
+
+#ifdef __cplusplus
+}
+#endif	/* __cplusplus */
+
+#endif	/* __INC_XMAC_H */
diff --git a/drivers/net/sk98lin/skaddr.c b/drivers/net/sk98lin/skaddr.c
new file mode 100644
index 0000000..6e6c56a
--- /dev/null
+++ b/drivers/net/sk98lin/skaddr.c
@@ -0,0 +1,1788 @@
+/******************************************************************************
+ *
+ * Name:	skaddr.c
+ * Project:	Gigabit Ethernet Adapters, ADDR-Module
+ * Version:	$Revision: 1.52 $
+ * Date:	$Date: 2003/06/02 13:46:15 $
+ * Purpose:	Manage Addresses (Multicast and Unicast) and Promiscuous Mode.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *	(C)Copyright 1998-2002 SysKonnect GmbH.
+ *	(C)Copyright 2002-2003 Marvell.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * Description:
+ *
+ * This module is intended to manage multicast addresses, address override,
+ * and promiscuous mode on GEnesis and Yukon adapters.
+ *
+ * Address Layout:
+ *	port address:		physical MAC address
+ *	1st exact match:	logical MAC address (GEnesis only)
+ *	2nd exact match:	RLMT multicast (GEnesis only)
+ *	exact match 3-13:	OS-specific multicasts (GEnesis only)
+ *
+ * Include File Hierarchy:
+ *
+ *	"skdrv1st.h"
+ *	"skdrv2nd.h"
+ *
+ ******************************************************************************/
+
+#if (defined(DEBUG) || ((!defined(LINT)) && (!defined(SK_SLIM))))
+static const char SysKonnectFileId[] =
+	"@(#) $Id: skaddr.c,v 1.52 2003/06/02 13:46:15 tschilli Exp $ (C) Marvell.";
+#endif /* DEBUG ||!LINT || !SK_SLIM */
+
+#define __SKADDR_C
+
+#ifdef __cplusplus
+extern "C" {
+#endif	/* cplusplus */
+
+#include "h/skdrv1st.h"
+#include "h/skdrv2nd.h"
+
+/* defines ********************************************************************/
+
+
+#define XMAC_POLY	0xEDB88320UL	/* CRC32-Poly - XMAC: Little Endian */
+#define GMAC_POLY	0x04C11DB7L	/* CRC16-Poly - GMAC: Little Endian */
+#define HASH_BITS	6				/* #bits in hash */
+#define	SK_MC_BIT	0x01
+
+/* Error numbers and messages. */
+
+#define SKERR_ADDR_E001		(SK_ERRBASE_ADDR + 0)
+#define SKERR_ADDR_E001MSG	"Bad Flags."
+#define SKERR_ADDR_E002		(SKERR_ADDR_E001 + 1)
+#define SKERR_ADDR_E002MSG	"New Error."
+
+/* typedefs *******************************************************************/
+
+/* None. */
+
+/* global variables ***********************************************************/
+
+/* 64-bit hash values with all bits set. */
+
+static const SK_U16	OnesHash[4] = {0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF};
+
+/* local variables ************************************************************/
+
+#ifdef DEBUG
+static int	Next0[SK_MAX_MACS] = {0};
+#endif	/* DEBUG */
+
+static int SkAddrGmacMcAdd(SK_AC *pAC, SK_IOC IoC, SK_U32 PortNumber,
+			   SK_MAC_ADDR *pMc, int Flags);
+static int SkAddrGmacMcClear(SK_AC *pAC, SK_IOC IoC, SK_U32 PortNumber,
+			     int Flags);
+static int SkAddrGmacMcUpdate(SK_AC *pAC, SK_IOC IoC, SK_U32 PortNumber);
+static int SkAddrGmacPromiscuousChange(SK_AC *pAC, SK_IOC IoC,
+				       SK_U32 PortNumber, int NewPromMode);
+static int SkAddrXmacMcAdd(SK_AC *pAC, SK_IOC IoC, SK_U32 PortNumber,
+			   SK_MAC_ADDR *pMc, int Flags);
+static int SkAddrXmacMcClear(SK_AC *pAC, SK_IOC IoC, SK_U32 PortNumber,
+			     int Flags);
+static int SkAddrXmacMcUpdate(SK_AC *pAC, SK_IOC IoC, SK_U32 PortNumber);
+static int SkAddrXmacPromiscuousChange(SK_AC *pAC, SK_IOC IoC,
+				       SK_U32 PortNumber, int NewPromMode);
+
+/* functions ******************************************************************/
+
+/******************************************************************************
+ *
+ *	SkAddrInit - initialize data, set state to init
+ *
+ * Description:
+ *
+ *	SK_INIT_DATA
+ *	============
+ *
+ *	This routine clears the multicast tables and resets promiscuous mode.
+ *	Some entries are reserved for the "logical MAC address", the
+ *	SK-RLMT multicast address, and the BPDU multicast address.
+ *
+ *
+ *	SK_INIT_IO
+ *	==========
+ *
+ *	All permanent MAC addresses are read from EPROM.
+ *	If the current MAC addresses are not already set in software,
+ *	they are set to the values of the permanent addresses.
+ *	The current addresses are written to the corresponding MAC.
+ *
+ *
+ *	SK_INIT_RUN
+ *	===========
+ *
+ *	Nothing.
+ *
+ * Context:
+ *	init, pageable
+ *
+ * Returns:
+ *	SK_ADDR_SUCCESS
+ */
+int	SkAddrInit(
+SK_AC	*pAC,	/* the adapter context */
+SK_IOC	IoC,	/* I/O context */
+int		Level)	/* initialization level */
+{
+	int			j;
+	SK_U32		i;
+	SK_U8		*InAddr;
+	SK_U16		*OutAddr;
+	SK_ADDR_PORT	*pAPort;
+
+	switch (Level) {
+	case SK_INIT_DATA:
+		SK_MEMSET((char *) &pAC->Addr, (SK_U8) 0,
+            (SK_U16) sizeof(SK_ADDR));
+
+		for (i = 0; i < SK_MAX_MACS; i++) {
+			pAPort = &pAC->Addr.Port[i];
+			pAPort->PromMode = SK_PROM_MODE_NONE;
+			
+			pAPort->FirstExactMatchRlmt = SK_ADDR_FIRST_MATCH_RLMT;
+			pAPort->FirstExactMatchDrv = SK_ADDR_FIRST_MATCH_DRV;
+			pAPort->NextExactMatchRlmt = SK_ADDR_FIRST_MATCH_RLMT;
+			pAPort->NextExactMatchDrv = SK_ADDR_FIRST_MATCH_DRV;
+		}
+#ifdef xDEBUG
+		for (i = 0; i < SK_MAX_MACS; i++) {
+			if (pAC->Addr.Port[i].NextExactMatchRlmt <
+				SK_ADDR_FIRST_MATCH_RLMT) {
+				Next0[i] |= 4;
+			}
+		}
+#endif	/* DEBUG */
+		/* pAC->Addr.InitDone = SK_INIT_DATA; */
+		break;
+
+    case SK_INIT_IO:
+#ifndef SK_NO_RLMT
+		for (i = 0; i < SK_MAX_NETS; i++) {
+			pAC->Addr.Net[i].ActivePort = pAC->Rlmt.Net[i].ActivePort;
+		}
+#endif /* !SK_NO_RLMT */
+#ifdef xDEBUG
+		for (i = 0; i < SK_MAX_MACS; i++) {
+			if (pAC->Addr.Port[i].NextExactMatchRlmt <
+				SK_ADDR_FIRST_MATCH_RLMT) {
+				Next0[i] |= 8;
+			}
+		}
+#endif	/* DEBUG */
+		
+		/* Read permanent logical MAC address from Control Register File. */
+		for (j = 0; j < SK_MAC_ADDR_LEN; j++) {
+			InAddr = (SK_U8 *) &pAC->Addr.Net[0].PermanentMacAddress.a[j];
+			SK_IN8(IoC, B2_MAC_1 + j, InAddr);
+		}
+
+		if (!pAC->Addr.Net[0].CurrentMacAddressSet) {
+			/* Set the current logical MAC address to the permanent one. */
+			pAC->Addr.Net[0].CurrentMacAddress =
+				pAC->Addr.Net[0].PermanentMacAddress;
+			pAC->Addr.Net[0].CurrentMacAddressSet = SK_TRUE;
+		}
+
+		/* Set the current logical MAC address. */
+		pAC->Addr.Port[pAC->Addr.Net[0].ActivePort].Exact[0] =
+			pAC->Addr.Net[0].CurrentMacAddress;
+#if SK_MAX_NETS > 1
+		/* Set logical MAC address for net 2 to (log | 3). */
+		if (!pAC->Addr.Net[1].CurrentMacAddressSet) {
+			pAC->Addr.Net[1].PermanentMacAddress =
+				pAC->Addr.Net[0].PermanentMacAddress;
+			pAC->Addr.Net[1].PermanentMacAddress.a[5] |= 3;
+			/* Set the current logical MAC address to the permanent one. */
+			pAC->Addr.Net[1].CurrentMacAddress =
+				pAC->Addr.Net[1].PermanentMacAddress;
+			pAC->Addr.Net[1].CurrentMacAddressSet = SK_TRUE;
+		}
+#endif	/* SK_MAX_NETS > 1 */
+
+#ifdef DEBUG
+		for (i = 0; i < (SK_U32) pAC->GIni.GIMacsFound; i++) {
+			SK_DBG_MSG(pAC, SK_DBGMOD_ADDR, SK_DBGCAT_INIT,
+				("Permanent MAC Address (Net%d): %02X %02X %02X %02X %02X %02X\n",
+					i,
+					pAC->Addr.Net[i].PermanentMacAddress.a[0],
+					pAC->Addr.Net[i].PermanentMacAddress.a[1],
+					pAC->Addr.Net[i].PermanentMacAddress.a[2],
+					pAC->Addr.Net[i].PermanentMacAddress.a[3],
+					pAC->Addr.Net[i].PermanentMacAddress.a[4],
+					pAC->Addr.Net[i].PermanentMacAddress.a[5]))
+			
+			SK_DBG_MSG(pAC, SK_DBGMOD_ADDR, SK_DBGCAT_INIT,
+				("Logical MAC Address (Net%d): %02X %02X %02X %02X %02X %02X\n",
+					i,
+					pAC->Addr.Net[i].CurrentMacAddress.a[0],
+					pAC->Addr.Net[i].CurrentMacAddress.a[1],
+					pAC->Addr.Net[i].CurrentMacAddress.a[2],
+					pAC->Addr.Net[i].CurrentMacAddress.a[3],
+					pAC->Addr.Net[i].CurrentMacAddress.a[4],
+					pAC->Addr.Net[i].CurrentMacAddress.a[5]))
+		}
+#endif	/* DEBUG */
+
+		for (i = 0; i < (SK_U32) pAC->GIni.GIMacsFound; i++) {
+			pAPort = &pAC->Addr.Port[i];
+
+			/* Read permanent port addresses from Control Register File. */
+			for (j = 0; j < SK_MAC_ADDR_LEN; j++) {
+				InAddr = (SK_U8 *) &pAPort->PermanentMacAddress.a[j];
+				SK_IN8(IoC, B2_MAC_2 + 8 * i + j, InAddr);
+			}
+
+			if (!pAPort->CurrentMacAddressSet) {
+				/*
+				 * Set the current and previous physical MAC address
+				 * of this port to its permanent MAC address.
+				 */
+				pAPort->CurrentMacAddress = pAPort->PermanentMacAddress;
+				pAPort->PreviousMacAddress = pAPort->PermanentMacAddress;
+				pAPort->CurrentMacAddressSet = SK_TRUE;
+			}
+
+			/* Set port's current physical MAC address. */
+			OutAddr = (SK_U16 *) &pAPort->CurrentMacAddress.a[0];
+#ifdef GENESIS
+			if (pAC->GIni.GIGenesis) {
+				XM_OUTADDR(IoC, i, XM_SA, OutAddr);
+			}
+#endif /* GENESIS */
+#ifdef YUKON
+			if (!pAC->GIni.GIGenesis) {
+				GM_OUTADDR(IoC, i, GM_SRC_ADDR_1L, OutAddr);
+			}
+#endif /* YUKON */
+#ifdef DEBUG
+			SK_DBG_MSG(pAC, SK_DBGMOD_ADDR, SK_DBGCAT_INIT,
+				("SkAddrInit: Permanent Physical MAC Address: %02X %02X %02X %02X %02X %02X\n",
+					pAPort->PermanentMacAddress.a[0],
+					pAPort->PermanentMacAddress.a[1],
+					pAPort->PermanentMacAddress.a[2],
+					pAPort->PermanentMacAddress.a[3],
+					pAPort->PermanentMacAddress.a[4],
+					pAPort->PermanentMacAddress.a[5]))
+			
+			SK_DBG_MSG(pAC, SK_DBGMOD_ADDR, SK_DBGCAT_INIT,
+				("SkAddrInit: Physical MAC Address: %02X %02X %02X %02X %02X %02X\n",
+					pAPort->CurrentMacAddress.a[0],
+					pAPort->CurrentMacAddress.a[1],
+					pAPort->CurrentMacAddress.a[2],
+					pAPort->CurrentMacAddress.a[3],
+					pAPort->CurrentMacAddress.a[4],
+					pAPort->CurrentMacAddress.a[5]))
+#endif /* DEBUG */
+		}
+		/* pAC->Addr.InitDone = SK_INIT_IO; */
+		break;
+
+	case SK_INIT_RUN:
+#ifdef xDEBUG
+		for (i = 0; i < SK_MAX_MACS; i++) {
+			if (pAC->Addr.Port[i].NextExactMatchRlmt <
+				SK_ADDR_FIRST_MATCH_RLMT) {
+				Next0[i] |= 16;
+			}
+		}
+#endif	/* DEBUG */
+
+		/* pAC->Addr.InitDone = SK_INIT_RUN; */
+		break;
+
+	default:	/* error */
+		break;
+	}
+
+	return (SK_ADDR_SUCCESS);
+	
+}	/* SkAddrInit */
+
+#ifndef SK_SLIM
+
+/******************************************************************************
+ *
+ *	SkAddrMcClear - clear the multicast table
+ *
+ * Description:
+ *	This routine clears the multicast table.
+ *
+ *	If not suppressed by Flag SK_MC_SW_ONLY, the hardware is updated
+ *	immediately.
+ *
+ *	It calls either SkAddrXmacMcClear or SkAddrGmacMcClear, according
+ *	to the adapter in use. The real work is done there.
+ *
+ * Context:
+ *	runtime, pageable
+ *	may be called starting with SK_INIT_DATA with flag SK_MC_SW_ONLY
+ *	may be called after SK_INIT_IO without limitation
+ *
+ * Returns:
+ *	SK_ADDR_SUCCESS
+ *	SK_ADDR_ILLEGAL_PORT
+ */
+int	SkAddrMcClear(
+SK_AC	*pAC,		/* adapter context */
+SK_IOC	IoC,		/* I/O context */
+SK_U32	PortNumber,	/* Index of affected port */
+int		Flags)		/* permanent/non-perm, sw-only */
+{
+	int ReturnCode;
+	
+	if (PortNumber >= (SK_U32) pAC->GIni.GIMacsFound) {
+		return (SK_ADDR_ILLEGAL_PORT);
+	}
+	
+	if (pAC->GIni.GIGenesis) {
+		ReturnCode = SkAddrXmacMcClear(pAC, IoC, PortNumber, Flags);
+	}
+	else {
+		ReturnCode = SkAddrGmacMcClear(pAC, IoC, PortNumber, Flags);
+	}
+
+	return (ReturnCode);
+
+}	/* SkAddrMcClear */
+
+#endif /* !SK_SLIM */
+
+#ifndef SK_SLIM
+
+/******************************************************************************
+ *
+ *	SkAddrXmacMcClear - clear the multicast table
+ *
+ * Description:
+ *	This routine clears the multicast table
+ *	(either entry 2 or entries 3-16 and InexactFilter) of the given port.
+ *	If not suppressed by Flag SK_MC_SW_ONLY, the hardware is updated
+ *	immediately.
+ *
+ * Context:
+ *	runtime, pageable
+ *	may be called starting with SK_INIT_DATA with flag SK_MC_SW_ONLY
+ *	may be called after SK_INIT_IO without limitation
+ *
+ * Returns:
+ *	SK_ADDR_SUCCESS
+ *	SK_ADDR_ILLEGAL_PORT
+ */
+static int	SkAddrXmacMcClear(
+SK_AC	*pAC,		/* adapter context */
+SK_IOC	IoC,		/* I/O context */
+SK_U32	PortNumber,	/* Index of affected port */
+int		Flags)		/* permanent/non-perm, sw-only */
+{
+	int i;
+
+	if (Flags & SK_ADDR_PERMANENT) {	/* permanent => RLMT */
+
+		/* Clear RLMT multicast addresses. */
+		pAC->Addr.Port[PortNumber].NextExactMatchRlmt = SK_ADDR_FIRST_MATCH_RLMT;
+	}
+	else {	/* not permanent => DRV */
+
+		/* Clear InexactFilter */
+		for (i = 0; i < 8; i++) {
+			pAC->Addr.Port[PortNumber].InexactFilter.Bytes[i] = 0;
+		}
+
+		/* Clear DRV multicast addresses. */
+
+		pAC->Addr.Port[PortNumber].NextExactMatchDrv = SK_ADDR_FIRST_MATCH_DRV;
+	}
+
+	if (!(Flags & SK_MC_SW_ONLY)) {
+		(void) SkAddrXmacMcUpdate(pAC, IoC, PortNumber);
+	}
+
+	return (SK_ADDR_SUCCESS);
+	
+}	/* SkAddrXmacMcClear */
+
+#endif /* !SK_SLIM */
+
+#ifndef SK_SLIM
+
+/******************************************************************************
+ *
+ *	SkAddrGmacMcClear - clear the multicast table
+ *
+ * Description:
+ *	This routine clears the multicast hashing table (InexactFilter)
+ *	(either the RLMT or the driver bits) of the given port.
+ *
+ *	If not suppressed by Flag SK_MC_SW_ONLY, the hardware is updated
+ *	immediately.
+ *
+ * Context:
+ *	runtime, pageable
+ *	may be called starting with SK_INIT_DATA with flag SK_MC_SW_ONLY
+ *	may be called after SK_INIT_IO without limitation
+ *
+ * Returns:
+ *	SK_ADDR_SUCCESS
+ *	SK_ADDR_ILLEGAL_PORT
+ */
+static int	SkAddrGmacMcClear(
+SK_AC	*pAC,		/* adapter context */
+SK_IOC	IoC,		/* I/O context */
+SK_U32	PortNumber,	/* Index of affected port */
+int		Flags)		/* permanent/non-perm, sw-only */
+{
+	int i;
+
+#ifdef DEBUG
+	SK_DBG_MSG(pAC, SK_DBGMOD_ADDR, SK_DBGCAT_CTRL,
+		("GMAC InexactFilter (not cleared): %02X %02X %02X %02X %02X %02X %02X %02X\n",
+			pAC->Addr.Port[PortNumber].InexactFilter.Bytes[0],
+			pAC->Addr.Port[PortNumber].InexactFilter.Bytes[1],
+			pAC->Addr.Port[PortNumber].InexactFilter.Bytes[2],
+			pAC->Addr.Port[PortNumber].InexactFilter.Bytes[3],
+			pAC->Addr.Port[PortNumber].InexactFilter.Bytes[4],
+			pAC->Addr.Port[PortNumber].InexactFilter.Bytes[5],
+			pAC->Addr.Port[PortNumber].InexactFilter.Bytes[6],
+			pAC->Addr.Port[PortNumber].InexactFilter.Bytes[7]))
+#endif	/* DEBUG */
+
+	/* Clear InexactFilter */
+	for (i = 0; i < 8; i++) {
+		pAC->Addr.Port[PortNumber].InexactFilter.Bytes[i] = 0;
+	}
+	
+	if (Flags & SK_ADDR_PERMANENT) {	/* permanent => RLMT */
+		
+		/* Copy DRV bits to InexactFilter. */
+		for (i = 0; i < 8; i++) {
+			pAC->Addr.Port[PortNumber].InexactFilter.Bytes[i] |=
+				pAC->Addr.Port[PortNumber].InexactDrvFilter.Bytes[i];
+			
+			/* Clear InexactRlmtFilter. */
+			pAC->Addr.Port[PortNumber].InexactRlmtFilter.Bytes[i] = 0;
+
+		}		
+	}
+	else {	/* not permanent => DRV */
+		
+		/* Copy RLMT bits to InexactFilter. */
+		for (i = 0; i < 8; i++) {
+			pAC->Addr.Port[PortNumber].InexactFilter.Bytes[i] |=
+				pAC->Addr.Port[PortNumber].InexactRlmtFilter.Bytes[i];
+			
+			/* Clear InexactDrvFilter. */
+			pAC->Addr.Port[PortNumber].InexactDrvFilter.Bytes[i] = 0;
+		}
+	}
+	
+#ifdef DEBUG
+	SK_DBG_MSG(pAC, SK_DBGMOD_ADDR, SK_DBGCAT_CTRL,
+		("GMAC InexactFilter (cleared): %02X %02X %02X %02X %02X %02X %02X %02X\n",
+			pAC->Addr.Port[PortNumber].InexactFilter.Bytes[0],
+			pAC->Addr.Port[PortNumber].InexactFilter.Bytes[1],
+			pAC->Addr.Port[PortNumber].InexactFilter.Bytes[2],
+			pAC->Addr.Port[PortNumber].InexactFilter.Bytes[3],
+			pAC->Addr.Port[PortNumber].InexactFilter.Bytes[4],
+			pAC->Addr.Port[PortNumber].InexactFilter.Bytes[5],
+			pAC->Addr.Port[PortNumber].InexactFilter.Bytes[6],
+			pAC->Addr.Port[PortNumber].InexactFilter.Bytes[7]))
+#endif	/* DEBUG */
+	
+	if (!(Flags & SK_MC_SW_ONLY)) {
+		(void) SkAddrGmacMcUpdate(pAC, IoC, PortNumber);
+	}
+	
+	return (SK_ADDR_SUCCESS);
+
+}	/* SkAddrGmacMcClear */
+
+#ifndef SK_ADDR_CHEAT
+
+/******************************************************************************
+ *
+ *	SkXmacMcHash - hash multicast address
+ *
+ * Description:
+ *	This routine computes the hash value for a multicast address.
+ *	A CRC32 algorithm is used.
+ *
+ * Notes:
+ *	The code was adapted from the XaQti data sheet.
+ *
+ * Context:
+ *	runtime, pageable
+ *
+ * Returns:
+ *	Hash value of multicast address.
+ */
+static SK_U32 SkXmacMcHash(
+unsigned char *pMc)	/* Multicast address */
+{
+	SK_U32 Idx;
+	SK_U32 Bit;
+	SK_U32 Data;
+	SK_U32 Crc;
+
+	Crc = 0xFFFFFFFFUL;
+	for (Idx = 0; Idx < SK_MAC_ADDR_LEN; Idx++) {
+		Data = *pMc++;
+		for (Bit = 0; Bit < 8; Bit++, Data >>= 1) {
+			Crc = (Crc >> 1) ^ (((Crc ^ Data) & 1) ? XMAC_POLY : 0);
+		}
+	}
+
+	return (Crc & ((1 << HASH_BITS) - 1));
+
+}	/* SkXmacMcHash */
+
+
+/******************************************************************************
+ *
+ *	SkGmacMcHash - hash multicast address
+ *
+ * Description:
+ *	This routine computes the hash value for a multicast address.
+ *	A CRC16 algorithm is used.
+ *
+ * Notes:
+ *
+ *
+ * Context:
+ *	runtime, pageable
+ *
+ * Returns:
+ *	Hash value of multicast address.
+ */
+static SK_U32 SkGmacMcHash(
+unsigned char *pMc)	/* Multicast address */
+{
+	SK_U32 Data;
+	SK_U32 TmpData;
+	SK_U32 Crc;
+	int Byte;
+	int Bit;
+
+	Crc = 0xFFFFFFFFUL;
+	for (Byte = 0; Byte < 6; Byte++) {
+		/* Get next byte. */
+		Data = (SK_U32) pMc[Byte];
+		
+		/* Change bit order in byte. */
+		TmpData = Data;
+		for (Bit = 0; Bit < 8; Bit++) {
+			if (TmpData & 1L) {
+				Data |=  1L << (7 - Bit);
+			}
+			else {
+				Data &= ~(1L << (7 - Bit));
+			}
+			TmpData >>= 1;
+		}
+		
+		Crc ^= (Data << 24);
+		for (Bit = 0; Bit < 8; Bit++) {
+			if (Crc & 0x80000000) {
+				Crc = (Crc << 1) ^ GMAC_POLY;
+			}
+			else {
+				Crc <<= 1;
+			}
+		}
+	}
+	
+	return (Crc & ((1 << HASH_BITS) - 1));
+
+}	/* SkGmacMcHash */
+
+#endif	/* !SK_ADDR_CHEAT */
+
+/******************************************************************************
+ *
+ *	SkAddrMcAdd - add a multicast address to a port
+ *
+ * Description:
+ *	This routine enables reception for a given address on the given port.
+ *
+ *	It calls either SkAddrXmacMcAdd or SkAddrGmacMcAdd, according to the
+ *	adapter in use. The real work is done there.
+ *
+ * Notes:
+ *	The return code is only valid for SK_PROM_MODE_NONE.
+ *
+ * Context:
+ *	runtime, pageable
+ *	may be called after SK_INIT_DATA
+ *
+ * Returns:
+ *	SK_MC_FILTERING_EXACT
+ *	SK_MC_FILTERING_INEXACT
+ *	SK_MC_ILLEGAL_ADDRESS
+ *	SK_MC_ILLEGAL_PORT
+ *	SK_MC_RLMT_OVERFLOW
+ */
+int	SkAddrMcAdd(
+SK_AC		*pAC,		/* adapter context */
+SK_IOC		IoC,		/* I/O context */
+SK_U32		PortNumber,	/* Port Number */
+SK_MAC_ADDR	*pMc,		/* multicast address to be added */
+int			Flags)		/* permanent/non-permanent */
+{
+	int ReturnCode;
+	
+	if (PortNumber >= (SK_U32) pAC->GIni.GIMacsFound) {
+		return (SK_ADDR_ILLEGAL_PORT);
+	}
+	
+	if (pAC->GIni.GIGenesis) {
+		ReturnCode = SkAddrXmacMcAdd(pAC, IoC, PortNumber, pMc, Flags);
+	}
+	else {
+		ReturnCode = SkAddrGmacMcAdd(pAC, IoC, PortNumber, pMc, Flags);
+	}
+
+	return (ReturnCode);
+
+}	/* SkAddrMcAdd */
+
+
+/******************************************************************************
+ *
+ *	SkAddrXmacMcAdd - add a multicast address to a port
+ *
+ * Description:
+ *	This routine enables reception for a given address on the given port.
+ *
+ * Notes:
+ *	The return code is only valid for SK_PROM_MODE_NONE.
+ *
+ *	The multicast bit is only checked if there are no free exact match
+ *	entries.
+ *
+ * Context:
+ *	runtime, pageable
+ *	may be called after SK_INIT_DATA
+ *
+ * Returns:
+ *	SK_MC_FILTERING_EXACT
+ *	SK_MC_FILTERING_INEXACT
+ *	SK_MC_ILLEGAL_ADDRESS
+ *	SK_MC_RLMT_OVERFLOW
+ */
+static int	SkAddrXmacMcAdd(
+SK_AC		*pAC,		/* adapter context */
+SK_IOC		IoC,		/* I/O context */
+SK_U32		PortNumber,	/* Port Number */
+SK_MAC_ADDR	*pMc,		/* multicast address to be added */
+int		Flags)		/* permanent/non-permanent */
+{
+	int	i;
+	SK_U8	Inexact;
+#ifndef SK_ADDR_CHEAT
+	SK_U32 HashBit;
+#endif	/* !defined(SK_ADDR_CHEAT) */
+
+	if (Flags & SK_ADDR_PERMANENT) {	/* permanent => RLMT */
+#ifdef xDEBUG
+		if (pAC->Addr.Port[PortNumber].NextExactMatchRlmt <
+			SK_ADDR_FIRST_MATCH_RLMT) {
+			Next0[PortNumber] |= 1;
+			return (SK_MC_RLMT_OVERFLOW);
+		}
+#endif	/* DEBUG */
+		
+		if (pAC->Addr.Port[PortNumber].NextExactMatchRlmt >
+			SK_ADDR_LAST_MATCH_RLMT) {
+			return (SK_MC_RLMT_OVERFLOW);
+		}
+
+		/* Set a RLMT multicast address. */
+
+		pAC->Addr.Port[PortNumber].Exact[
+			pAC->Addr.Port[PortNumber].NextExactMatchRlmt++] = *pMc;
+
+		return (SK_MC_FILTERING_EXACT);
+	}
+
+#ifdef xDEBUG
+	if (pAC->Addr.Port[PortNumber].NextExactMatchDrv <
+		SK_ADDR_FIRST_MATCH_DRV) {
+			Next0[PortNumber] |= 2;
+		return (SK_MC_RLMT_OVERFLOW);
+	}
+#endif	/* DEBUG */
+	
+	if (pAC->Addr.Port[PortNumber].NextExactMatchDrv <= SK_ADDR_LAST_MATCH_DRV) {
+
+		/* Set exact match entry. */
+		pAC->Addr.Port[PortNumber].Exact[
+			pAC->Addr.Port[PortNumber].NextExactMatchDrv++] = *pMc;
+
+		/* Clear InexactFilter */
+		for (i = 0; i < 8; i++) {
+			pAC->Addr.Port[PortNumber].InexactFilter.Bytes[i] = 0;
+		}
+	}
+	else {
+		if (!(pMc->a[0] & SK_MC_BIT)) {
+			/* Hashing only possible with multicast addresses */
+			return (SK_MC_ILLEGAL_ADDRESS);
+		}
+#ifndef SK_ADDR_CHEAT
+		/* Compute hash value of address. */
+		HashBit = 63 - SkXmacMcHash(&pMc->a[0]);
+
+		/* Add bit to InexactFilter. */
+		pAC->Addr.Port[PortNumber].InexactFilter.Bytes[HashBit / 8] |=
+			1 << (HashBit % 8);
+#else	/* SK_ADDR_CHEAT */
+		/* Set all bits in InexactFilter. */
+		for (i = 0; i < 8; i++) {
+			pAC->Addr.Port[PortNumber].InexactFilter.Bytes[i] = 0xFF;
+		}
+#endif	/* SK_ADDR_CHEAT */
+	}
+
+	for (Inexact = 0, i = 0; i < 8; i++) {
+		Inexact |= pAC->Addr.Port[PortNumber].InexactFilter.Bytes[i];
+	}
+
+	if (Inexact == 0 && pAC->Addr.Port[PortNumber].PromMode == 0) {
+		return (SK_MC_FILTERING_EXACT);
+	}
+	else {
+		return (SK_MC_FILTERING_INEXACT);
+	}
+
+}	/* SkAddrXmacMcAdd */
+
+
+/******************************************************************************
+ *
+ *	SkAddrGmacMcAdd - add a multicast address to a port
+ *
+ * Description:
+ *	This routine enables reception for a given address on the given port.
+ *
+ * Notes:
+ *	The return code is only valid for SK_PROM_MODE_NONE.
+ *
+ * Context:
+ *	runtime, pageable
+ *	may be called after SK_INIT_DATA
+ *
+ * Returns:
+ *	SK_MC_FILTERING_INEXACT
+ *	SK_MC_ILLEGAL_ADDRESS
+ */
+static int	SkAddrGmacMcAdd(
+SK_AC		*pAC,		/* adapter context */
+SK_IOC		IoC,		/* I/O context */
+SK_U32		PortNumber,	/* Port Number */
+SK_MAC_ADDR	*pMc,		/* multicast address to be added */
+int		Flags)		/* permanent/non-permanent */
+{
+	int	i;
+#ifndef SK_ADDR_CHEAT
+	SK_U32 HashBit;
+#endif	/* !defined(SK_ADDR_CHEAT) */
+		
+	if (!(pMc->a[0] & SK_MC_BIT)) {
+		/* Hashing only possible with multicast addresses */
+		return (SK_MC_ILLEGAL_ADDRESS);
+	}
+	
+#ifndef SK_ADDR_CHEAT
+	
+	/* Compute hash value of address. */
+	HashBit = SkGmacMcHash(&pMc->a[0]);
+	
+	if (Flags & SK_ADDR_PERMANENT) {	/* permanent => RLMT */
+		
+		/* Add bit to InexactRlmtFilter. */
+		pAC->Addr.Port[PortNumber].InexactRlmtFilter.Bytes[HashBit / 8] |=
+			1 << (HashBit % 8);
+		
+		/* Copy bit to InexactFilter. */
+		for (i = 0; i < 8; i++) {
+			pAC->Addr.Port[PortNumber].InexactFilter.Bytes[i] |=
+				pAC->Addr.Port[PortNumber].InexactRlmtFilter.Bytes[i];
+		}
+#ifdef DEBUG
+		SK_DBG_MSG(pAC, SK_DBGMOD_ADDR, SK_DBGCAT_CTRL,
+		("GMAC InexactRlmtFilter: %02X %02X %02X %02X %02X %02X %02X %02X\n",
+			pAC->Addr.Port[PortNumber].InexactRlmtFilter.Bytes[0],
+			pAC->Addr.Port[PortNumber].InexactRlmtFilter.Bytes[1],
+			pAC->Addr.Port[PortNumber].InexactRlmtFilter.Bytes[2],
+			pAC->Addr.Port[PortNumber].InexactRlmtFilter.Bytes[3],
+			pAC->Addr.Port[PortNumber].InexactRlmtFilter.Bytes[4],
+			pAC->Addr.Port[PortNumber].InexactRlmtFilter.Bytes[5],
+			pAC->Addr.Port[PortNumber].InexactRlmtFilter.Bytes[6],
+			pAC->Addr.Port[PortNumber].InexactRlmtFilter.Bytes[7]))
+#endif	/* DEBUG */
+	}
+	else {	/* not permanent => DRV */
+		
+		/* Add bit to InexactDrvFilter. */
+		pAC->Addr.Port[PortNumber].InexactDrvFilter.Bytes[HashBit / 8] |=
+			1 << (HashBit % 8);
+		
+		/* Copy bit to InexactFilter. */
+		for (i = 0; i < 8; i++) {
+			pAC->Addr.Port[PortNumber].InexactFilter.Bytes[i] |=
+				pAC->Addr.Port[PortNumber].InexactDrvFilter.Bytes[i];
+		}
+#ifdef DEBUG
+		SK_DBG_MSG(pAC, SK_DBGMOD_ADDR, SK_DBGCAT_CTRL,
+		("GMAC InexactDrvFilter: %02X %02X %02X %02X %02X %02X %02X %02X\n",
+			pAC->Addr.Port[PortNumber].InexactDrvFilter.Bytes[0],
+			pAC->Addr.Port[PortNumber].InexactDrvFilter.Bytes[1],
+			pAC->Addr.Port[PortNumber].InexactDrvFilter.Bytes[2],
+			pAC->Addr.Port[PortNumber].InexactDrvFilter.Bytes[3],
+			pAC->Addr.Port[PortNumber].InexactDrvFilter.Bytes[4],
+			pAC->Addr.Port[PortNumber].InexactDrvFilter.Bytes[5],
+			pAC->Addr.Port[PortNumber].InexactDrvFilter.Bytes[6],
+			pAC->Addr.Port[PortNumber].InexactDrvFilter.Bytes[7]))
+#endif	/* DEBUG */
+	}
+	
+#else	/* SK_ADDR_CHEAT */
+	
+	/* Set all bits in InexactFilter. */
+	for (i = 0; i < 8; i++) {
+		pAC->Addr.Port[PortNumber].InexactFilter.Bytes[i] = 0xFF;
+	}
+#endif	/* SK_ADDR_CHEAT */
+		
+	return (SK_MC_FILTERING_INEXACT);
+	
+}	/* SkAddrGmacMcAdd */
+
+#endif /* !SK_SLIM */
+
+/******************************************************************************
+ *
+ *	SkAddrMcUpdate - update the HW MC address table and set the MAC address
+ *
+ * Description:
+ *	This routine enables reception of the addresses contained in a local
+ *	table for a given port.
+ *	It also programs the port's current physical MAC address.
+ *
+ *	It calls either SkAddrXmacMcUpdate or SkAddrGmacMcUpdate, according
+ *	to the adapter in use. The real work is done there.
+ *
+ * Notes:
+ *	The return code is only valid for SK_PROM_MODE_NONE.
+ *
+ * Context:
+ *	runtime, pageable
+ *	may be called after SK_INIT_IO
+ *
+ * Returns:
+ *	SK_MC_FILTERING_EXACT
+ *	SK_MC_FILTERING_INEXACT
+ *	SK_ADDR_ILLEGAL_PORT
+ */
+int	SkAddrMcUpdate(
+SK_AC	*pAC,		/* adapter context */
+SK_IOC	IoC,		/* I/O context */
+SK_U32	PortNumber)	/* Port Number */
+{
+	int ReturnCode = 0;
+#if (!defined(SK_SLIM) || defined(DEBUG))
+	if (PortNumber >= (SK_U32) pAC->GIni.GIMacsFound) {
+		return (SK_ADDR_ILLEGAL_PORT);
+	}
+#endif /* !SK_SLIM || DEBUG */
+
+#ifdef GENESIS
+	if (pAC->GIni.GIGenesis) {
+		ReturnCode = SkAddrXmacMcUpdate(pAC, IoC, PortNumber);
+	}
+#endif /* GENESIS */
+#ifdef YUKON
+	if (!pAC->GIni.GIGenesis) {
+		ReturnCode = SkAddrGmacMcUpdate(pAC, IoC, PortNumber);
+	}
+#endif /* YUKON */
+	return (ReturnCode);
+
+}	/* SkAddrMcUpdate */
+
+
+#ifdef GENESIS
+
+/******************************************************************************
+ *
+ *	SkAddrXmacMcUpdate - update the HW MC address table and set the MAC address
+ *
+ * Description:
+ *	This routine enables reception of the addresses contained in a local
+ *	table for a given port.
+ *	It also programs the port's current physical MAC address.
+ *
+ * Notes:
+ *	The return code is only valid for SK_PROM_MODE_NONE.
+ *
+ * Context:
+ *	runtime, pageable
+ *	may be called after SK_INIT_IO
+ *
+ * Returns:
+ *	SK_MC_FILTERING_EXACT
+ *	SK_MC_FILTERING_INEXACT
+ *	SK_ADDR_ILLEGAL_PORT
+ */
+static int	SkAddrXmacMcUpdate(
+SK_AC	*pAC,		/* adapter context */
+SK_IOC	IoC,		/* I/O context */
+SK_U32	PortNumber)	/* Port Number */
+{
+	SK_U32		i;
+	SK_U8		Inexact;
+	SK_U16		*OutAddr;
+	SK_ADDR_PORT	*pAPort;
+
+	SK_DBG_MSG(pAC,SK_DBGMOD_ADDR, SK_DBGCAT_CTRL,
+		("SkAddrXmacMcUpdate on Port %u.\n", PortNumber))
+	
+	pAPort = &pAC->Addr.Port[PortNumber];
+
+#ifdef DEBUG
+	SK_DBG_MSG(pAC,SK_DBGMOD_ADDR, SK_DBGCAT_CTRL,
+		("Next0 on Port %d: %d\n", PortNumber, Next0[PortNumber]))
+#endif /* DEBUG */
+
+	/* Start with 0 to also program the logical MAC address. */
+	for (i = 0; i < pAPort->NextExactMatchRlmt; i++) {
+		/* Set exact match address i on XMAC */
+		OutAddr = (SK_U16 *) &pAPort->Exact[i].a[0];
+		XM_OUTADDR(IoC, PortNumber, XM_EXM(i), OutAddr);
+	}
+
+	/* Clear other permanent exact match addresses on XMAC */
+	if (pAPort->NextExactMatchRlmt <= SK_ADDR_LAST_MATCH_RLMT) {
+		
+		SkXmClrExactAddr(pAC, IoC, PortNumber, pAPort->NextExactMatchRlmt,
+			SK_ADDR_LAST_MATCH_RLMT);
+	}
+
+	for (i = pAPort->FirstExactMatchDrv; i < pAPort->NextExactMatchDrv; i++) {
+		OutAddr = (SK_U16 *) &pAPort->Exact[i].a[0];
+		XM_OUTADDR(IoC, PortNumber, XM_EXM(i), OutAddr);
+	}
+
+	/* Clear other non-permanent exact match addresses on XMAC */
+	if (pAPort->NextExactMatchDrv <= SK_ADDR_LAST_MATCH_DRV) {
+		
+		SkXmClrExactAddr(pAC, IoC, PortNumber, pAPort->NextExactMatchDrv,
+			SK_ADDR_LAST_MATCH_DRV);
+	}
+
+	for (Inexact = 0, i = 0; i < 8; i++) {
+		Inexact |= pAPort->InexactFilter.Bytes[i];
+	}
+
+	if (pAPort->PromMode & SK_PROM_MODE_ALL_MC) {
+		
+		/* Set all bits in 64-bit hash register. */
+		XM_OUTHASH(IoC, PortNumber, XM_HSM, &OnesHash);
+		
+		/* Enable Hashing */
+		SkMacHashing(pAC, IoC, (int) PortNumber, SK_TRUE);
+	}
+	else if (Inexact != 0) {
+		
+		/* Set 64-bit hash register to InexactFilter. */
+		XM_OUTHASH(IoC, PortNumber, XM_HSM, &pAPort->InexactFilter.Bytes[0]);
+		
+		/* Enable Hashing */
+		SkMacHashing(pAC, IoC, (int) PortNumber, SK_TRUE);
+	}
+	else {
+		/* Disable Hashing */
+		SkMacHashing(pAC, IoC, (int) PortNumber, SK_FALSE);
+	}
+
+	if (pAPort->PromMode != SK_PROM_MODE_NONE) {
+		(void) SkAddrXmacPromiscuousChange(pAC, IoC, PortNumber, pAPort->PromMode);
+	}
+
+	/* Set port's current physical MAC address. */
+	OutAddr = (SK_U16 *) &pAPort->CurrentMacAddress.a[0];
+	
+	XM_OUTADDR(IoC, PortNumber, XM_SA, OutAddr);
+
+#ifdef xDEBUG
+	for (i = 0; i < pAPort->NextExactMatchRlmt; i++) {
+		SK_U8		InAddr8[6];
+		SK_U16		*InAddr;
+
+		/* Get exact match address i from port PortNumber. */
+		InAddr = (SK_U16 *) &InAddr8[0];
+		
+		XM_INADDR(IoC, PortNumber, XM_EXM(i), InAddr);
+		
+		SK_DBG_MSG(pAC,SK_DBGMOD_ADDR, SK_DBGCAT_CTRL,
+			("SkAddrXmacMcUpdate: MC address %d on Port %u: ",
+			 "%02x %02x %02x %02x %02x %02x -- %02x %02x %02x %02x %02x %02x\n",
+				i,
+				PortNumber,
+				InAddr8[0],
+				InAddr8[1],
+				InAddr8[2],
+				InAddr8[3],
+				InAddr8[4],
+				InAddr8[5],
+				pAPort->Exact[i].a[0],
+				pAPort->Exact[i].a[1],
+				pAPort->Exact[i].a[2],
+				pAPort->Exact[i].a[3],
+				pAPort->Exact[i].a[4],
+				pAPort->Exact[i].a[5]))
+	}
+#endif /* DEBUG */
+
+	/* Determine return value. */
+	if (Inexact == 0 && pAPort->PromMode == 0) {
+		return (SK_MC_FILTERING_EXACT);
+	}
+	else {
+		return (SK_MC_FILTERING_INEXACT);
+	}
+	
+}	/* SkAddrXmacMcUpdate */
+
+#endif  /* GENESIS */
+
+#ifdef YUKON
+
+/******************************************************************************
+ *
+ *	SkAddrGmacMcUpdate - update the HW MC address table and set the MAC address
+ *
+ * Description:
+ *	This routine enables reception of the addresses contained in a local
+ *	table for a given port.
+ *	It also programs the port's current physical MAC address.
+ *
+ * Notes:
+ *	The return code is only valid for SK_PROM_MODE_NONE.
+ *
+ * Context:
+ *	runtime, pageable
+ *	may be called after SK_INIT_IO
+ *
+ * Returns:
+ *	SK_MC_FILTERING_EXACT
+ *	SK_MC_FILTERING_INEXACT
+ *	SK_ADDR_ILLEGAL_PORT
+ */
+static int	SkAddrGmacMcUpdate(
+SK_AC	*pAC,		/* adapter context */
+SK_IOC	IoC,		/* I/O context */
+SK_U32	PortNumber)	/* Port Number */
+{
+#ifndef SK_SLIM
+	SK_U32		i;
+	SK_U8		Inexact;
+#endif	/* not SK_SLIM */
+	SK_U16		*OutAddr;
+	SK_ADDR_PORT	*pAPort;
+
+	SK_DBG_MSG(pAC,SK_DBGMOD_ADDR, SK_DBGCAT_CTRL,
+		("SkAddrGmacMcUpdate on Port %u.\n", PortNumber))
+	
+	pAPort = &pAC->Addr.Port[PortNumber];
+
+#ifdef DEBUG
+	SK_DBG_MSG(pAC,SK_DBGMOD_ADDR, SK_DBGCAT_CTRL,
+		("Next0 on Port %d: %d\n", PortNumber, Next0[PortNumber]))
+#endif /* DEBUG */
+	
+#ifndef SK_SLIM
+	for (Inexact = 0, i = 0; i < 8; i++) {
+		Inexact |= pAPort->InexactFilter.Bytes[i];
+	}
+	
+	/* Set 64-bit hash register to InexactFilter. */
+	GM_OUTHASH(IoC, PortNumber, GM_MC_ADDR_H1,
+		&pAPort->InexactFilter.Bytes[0]);
+	
+	if (pAPort->PromMode & SK_PROM_MODE_ALL_MC) {				
+		
+		/* Set all bits in 64-bit hash register. */
+		GM_OUTHASH(IoC, PortNumber, GM_MC_ADDR_H1, &OnesHash);
+		
+		/* Enable Hashing */
+		SkMacHashing(pAC, IoC, (int) PortNumber, SK_TRUE);
+	}
+	else {	
+		/* Enable Hashing. */
+		SkMacHashing(pAC, IoC, (int) PortNumber, SK_TRUE);
+	}
+	
+	if (pAPort->PromMode != SK_PROM_MODE_NONE) {
+		(void) SkAddrGmacPromiscuousChange(pAC, IoC, PortNumber, pAPort->PromMode);
+	}
+#else /* SK_SLIM */
+
+	/* Set all bits in 64-bit hash register. */
+	GM_OUTHASH(IoC, PortNumber, GM_MC_ADDR_H1, &OnesHash);
+
+	/* Enable Hashing */
+	SkMacHashing(pAC, IoC, (int) PortNumber, SK_TRUE);
+	
+	(void) SkAddrGmacPromiscuousChange(pAC, IoC, PortNumber, pAPort->PromMode);
+	
+#endif /* SK_SLIM */
+	
+	/* Set port's current physical MAC address. */
+	OutAddr = (SK_U16 *) &pAPort->CurrentMacAddress.a[0];
+	GM_OUTADDR(IoC, PortNumber, GM_SRC_ADDR_1L, OutAddr);
+	
+	/* Set port's current logical MAC address. */
+	OutAddr = (SK_U16 *) &pAPort->Exact[0].a[0];
+	GM_OUTADDR(IoC, PortNumber, GM_SRC_ADDR_2L, OutAddr);
+	
+#ifdef DEBUG
+	SK_DBG_MSG(pAC, SK_DBGMOD_ADDR, SK_DBGCAT_CTRL,
+		("SkAddrGmacMcUpdate: Permanent Physical MAC Address: %02X %02X %02X %02X %02X %02X\n",
+			pAPort->Exact[0].a[0],
+			pAPort->Exact[0].a[1],
+			pAPort->Exact[0].a[2],
+			pAPort->Exact[0].a[3],
+			pAPort->Exact[0].a[4],
+			pAPort->Exact[0].a[5]))
+	
+	SK_DBG_MSG(pAC, SK_DBGMOD_ADDR, SK_DBGCAT_CTRL,
+		("SkAddrGmacMcUpdate: Physical MAC Address: %02X %02X %02X %02X %02X %02X\n",
+			pAPort->CurrentMacAddress.a[0],
+			pAPort->CurrentMacAddress.a[1],
+			pAPort->CurrentMacAddress.a[2],
+			pAPort->CurrentMacAddress.a[3],
+			pAPort->CurrentMacAddress.a[4],
+			pAPort->CurrentMacAddress.a[5]))
+#endif /* DEBUG */
+	
+#ifndef SK_SLIM
+	/* Determine return value. */
+	if (Inexact == 0 && pAPort->PromMode == 0) {
+		return (SK_MC_FILTERING_EXACT);
+	}
+	else {
+		return (SK_MC_FILTERING_INEXACT);
+	}
+#else /* SK_SLIM */
+	return (SK_MC_FILTERING_INEXACT);
+#endif /* SK_SLIM */
+	
+}	/* SkAddrGmacMcUpdate */
+
+#endif /* YUKON */
+
+#ifndef SK_NO_MAO
+
+/******************************************************************************
+ *
+ *	SkAddrOverride - override a port's MAC address
+ *
+ * Description:
+ *	This routine overrides the MAC address of one port.
+ *
+ * Context:
+ *	runtime, pageable
+ *	may be called after SK_INIT_IO
+ *
+ * Returns:
+ *	SK_ADDR_SUCCESS if successful.
+ *	SK_ADDR_DUPLICATE_ADDRESS if duplicate MAC address.
+ *	SK_ADDR_MULTICAST_ADDRESS if multicast or broadcast address.
+ *	SK_ADDR_TOO_EARLY if SK_INIT_IO was not executed before.
+ */
+int	SkAddrOverride(
+SK_AC		*pAC,				/* adapter context */
+SK_IOC		IoC,				/* I/O context */
+SK_U32		PortNumber,			/* Port Number */
+SK_MAC_ADDR	SK_FAR *pNewAddr,	/* new MAC address */
+int			Flags)				/* logical/physical MAC address */
+{
+#ifndef SK_NO_RLMT
+	SK_EVPARA	Para;
+#endif /* !SK_NO_RLMT */
+	SK_U32		NetNumber;
+	SK_U32		i;
+	SK_U16		SK_FAR *OutAddr;
+
+#ifndef SK_NO_RLMT
+	NetNumber = pAC->Rlmt.Port[PortNumber].Net->NetNumber;
+#else
+	NetNumber = 0;
+#endif /* SK_NO_RLMT */
+#if (!defined(SK_SLIM) || defined(DEBUG))
+	if (PortNumber >= (SK_U32) pAC->GIni.GIMacsFound) {
+		return (SK_ADDR_ILLEGAL_PORT);
+	}
+#endif /* !SK_SLIM || DEBUG */
+	if (pNewAddr != NULL && (pNewAddr->a[0] & SK_MC_BIT) != 0) {
+		return (SK_ADDR_MULTICAST_ADDRESS);
+	}
+
+	if (!pAC->Addr.Net[NetNumber].CurrentMacAddressSet) {
+		return (SK_ADDR_TOO_EARLY);
+	}
+
+	if (Flags & SK_ADDR_SET_LOGICAL) {	/* Activate logical MAC address. */
+		/* Parameter *pNewAddr is ignored. */
+		for (i = 0; i < (SK_U32) pAC->GIni.GIMacsFound; i++) {
+			if (!pAC->Addr.Port[i].CurrentMacAddressSet) {
+				return (SK_ADDR_TOO_EARLY);
+			}
+		}
+#ifndef SK_NO_RLMT
+		/* Set PortNumber to number of net's active port. */
+		PortNumber = pAC->Rlmt.Net[NetNumber].
+			Port[pAC->Addr.Net[NetNumber].ActivePort]->PortNumber;
+#endif /* !SK_NO_RLMT */
+		pAC->Addr.Port[PortNumber].Exact[0] =
+			pAC->Addr.Net[NetNumber].CurrentMacAddress;
+
+		/* Write address to first exact match entry of active port. */
+		(void) SkAddrMcUpdate(pAC, IoC, PortNumber);
+	}
+	else if (Flags & SK_ADDR_CLEAR_LOGICAL) {
+		/* Deactivate logical MAC address. */
+		/* Parameter *pNewAddr is ignored. */
+		for (i = 0; i < (SK_U32) pAC->GIni.GIMacsFound; i++) {
+			if (!pAC->Addr.Port[i].CurrentMacAddressSet) {
+				return (SK_ADDR_TOO_EARLY);
+			}
+		}
+#ifndef SK_NO_RLMT
+		/* Set PortNumber to number of net's active port. */
+		PortNumber = pAC->Rlmt.Net[NetNumber].
+			Port[pAC->Addr.Net[NetNumber].ActivePort]->PortNumber;
+#endif /* !SK_NO_RLMT */
+		for (i = 0; i < SK_MAC_ADDR_LEN; i++ ) {
+			pAC->Addr.Port[PortNumber].Exact[0].a[i] = 0;
+		}
+
+		/* Write address to first exact match entry of active port. */
+		(void) SkAddrMcUpdate(pAC, IoC, PortNumber);
+	}
+	else if (Flags & SK_ADDR_PHYSICAL_ADDRESS) {	/* Physical MAC address. */
+		if (SK_ADDR_EQUAL(pNewAddr->a,
+			pAC->Addr.Net[NetNumber].CurrentMacAddress.a)) {
+			return (SK_ADDR_DUPLICATE_ADDRESS);
+		}
+
+		for (i = 0; i < (SK_U32) pAC->GIni.GIMacsFound; i++) {
+			if (!pAC->Addr.Port[i].CurrentMacAddressSet) {
+				return (SK_ADDR_TOO_EARLY);
+			}
+
+			if (SK_ADDR_EQUAL(pNewAddr->a,
+				pAC->Addr.Port[i].CurrentMacAddress.a)) {
+				if (i == PortNumber) {
+					return (SK_ADDR_SUCCESS);
+				}
+				else {
+					return (SK_ADDR_DUPLICATE_ADDRESS);
+				}
+			}
+		}
+
+		pAC->Addr.Port[PortNumber].PreviousMacAddress =
+			pAC->Addr.Port[PortNumber].CurrentMacAddress;
+		pAC->Addr.Port[PortNumber].CurrentMacAddress = *pNewAddr;
+
+		/* Change port's physical MAC address. */
+		OutAddr = (SK_U16 SK_FAR *) pNewAddr;
+#ifdef GENESIS
+		if (pAC->GIni.GIGenesis) {
+			XM_OUTADDR(IoC, PortNumber, XM_SA, OutAddr);
+		}
+#endif /* GENESIS */
+#ifdef YUKON
+		if (!pAC->GIni.GIGenesis) {
+			GM_OUTADDR(IoC, PortNumber, GM_SRC_ADDR_1L, OutAddr);
+		}
+#endif /* YUKON */
+
+#ifndef SK_NO_RLMT
+		/* Report address change to RLMT. */
+		Para.Para32[0] = PortNumber;
+		Para.Para32[0] = -1;
+		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_PORT_ADDR, Para);
+#endif /* !SK_NO_RLMT */
+	}
+	else {	/* Logical MAC address. */
+		if (SK_ADDR_EQUAL(pNewAddr->a,
+			pAC->Addr.Net[NetNumber].CurrentMacAddress.a)) {
+			return (SK_ADDR_SUCCESS);
+		}
+		
+		for (i = 0; i < (SK_U32) pAC->GIni.GIMacsFound; i++) {
+			if (!pAC->Addr.Port[i].CurrentMacAddressSet) {
+				return (SK_ADDR_TOO_EARLY);
+			}
+
+			if (SK_ADDR_EQUAL(pNewAddr->a,
+				pAC->Addr.Port[i].CurrentMacAddress.a)) {
+				return (SK_ADDR_DUPLICATE_ADDRESS);
+			}
+		}
+		
+		/*
+		 * In case that the physical and the logical MAC addresses are equal
+		 * we must also change the physical MAC address here.
+		 * In this case we have an adapter which initially was programmed with
+		 * two identical MAC addresses.
+		 */
+		if (SK_ADDR_EQUAL(pAC->Addr.Port[PortNumber].CurrentMacAddress.a,
+				pAC->Addr.Port[PortNumber].Exact[0].a)) {
+			
+			pAC->Addr.Port[PortNumber].PreviousMacAddress =
+				pAC->Addr.Port[PortNumber].CurrentMacAddress;
+			pAC->Addr.Port[PortNumber].CurrentMacAddress = *pNewAddr;
+			
+#ifndef SK_NO_RLMT
+			/* Report address change to RLMT. */
+			Para.Para32[0] = PortNumber;
+			Para.Para32[0] = -1;
+			SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_PORT_ADDR, Para);
+#endif /* !SK_NO_RLMT */
+		}
+		
+#ifndef SK_NO_RLMT
+		/* Set PortNumber to number of net's active port. */
+		PortNumber = pAC->Rlmt.Net[NetNumber].
+			Port[pAC->Addr.Net[NetNumber].ActivePort]->PortNumber;
+#endif /* !SK_NO_RLMT */
+		pAC->Addr.Net[NetNumber].CurrentMacAddress = *pNewAddr;
+		pAC->Addr.Port[PortNumber].Exact[0] = *pNewAddr;
+#ifdef DEBUG
+		SK_DBG_MSG(pAC,SK_DBGMOD_ADDR, SK_DBGCAT_CTRL,
+			("SkAddrOverride: Permanent MAC Address: %02X %02X %02X %02X %02X %02X\n",
+				pAC->Addr.Net[NetNumber].PermanentMacAddress.a[0],
+				pAC->Addr.Net[NetNumber].PermanentMacAddress.a[1],
+				pAC->Addr.Net[NetNumber].PermanentMacAddress.a[2],
+				pAC->Addr.Net[NetNumber].PermanentMacAddress.a[3],
+				pAC->Addr.Net[NetNumber].PermanentMacAddress.a[4],
+				pAC->Addr.Net[NetNumber].PermanentMacAddress.a[5]))
+		
+		SK_DBG_MSG(pAC,SK_DBGMOD_ADDR, SK_DBGCAT_CTRL,
+			("SkAddrOverride: New logical MAC Address: %02X %02X %02X %02X %02X %02X\n",
+				pAC->Addr.Net[NetNumber].CurrentMacAddress.a[0],
+				pAC->Addr.Net[NetNumber].CurrentMacAddress.a[1],
+				pAC->Addr.Net[NetNumber].CurrentMacAddress.a[2],
+				pAC->Addr.Net[NetNumber].CurrentMacAddress.a[3],
+				pAC->Addr.Net[NetNumber].CurrentMacAddress.a[4],
+				pAC->Addr.Net[NetNumber].CurrentMacAddress.a[5]))
+#endif /* DEBUG */
+
+        /* Write address to first exact match entry of active port. */
+		(void) SkAddrMcUpdate(pAC, IoC, PortNumber);
+	}
+
+	return (SK_ADDR_SUCCESS);
+	
+}	/* SkAddrOverride */
+
+
+#endif /* SK_NO_MAO */
+
+/******************************************************************************
+ *
+ *	SkAddrPromiscuousChange - set promiscuous mode for given port
+ *
+ * Description:
+ *	This routine manages promiscuous mode:
+ *	- none
+ *	- all LLC frames
+ *	- all MC frames
+ *
+ *	It calls either SkAddrXmacPromiscuousChange or
+ *	SkAddrGmacPromiscuousChange, according to the adapter in use.
+ *	The real work is done there.
+ *
+ * Context:
+ *	runtime, pageable
+ *	may be called after SK_INIT_IO
+ *
+ * Returns:
+ *	SK_ADDR_SUCCESS
+ *	SK_ADDR_ILLEGAL_PORT
+ */
+int	SkAddrPromiscuousChange(
+SK_AC	*pAC,			/* adapter context */
+SK_IOC	IoC,			/* I/O context */
+SK_U32	PortNumber,		/* port whose promiscuous mode changes */
+int		NewPromMode)	/* new promiscuous mode */
+{
+	int ReturnCode = 0;
+#if (!defined(SK_SLIM) || defined(DEBUG))
+	if (PortNumber >= (SK_U32) pAC->GIni.GIMacsFound) {
+		return (SK_ADDR_ILLEGAL_PORT);
+	}
+#endif /* !SK_SLIM || DEBUG */
+
+#ifdef GENESIS
+	if (pAC->GIni.GIGenesis) {
+		ReturnCode =
+			SkAddrXmacPromiscuousChange(pAC, IoC, PortNumber, NewPromMode);
+	}
+#endif /* GENESIS */
+#ifdef YUKON
+	if (!pAC->GIni.GIGenesis) {
+		ReturnCode =
+			SkAddrGmacPromiscuousChange(pAC, IoC, PortNumber, NewPromMode);
+	}
+#endif /* YUKON */
+
+	return (ReturnCode);
+
+}	/* SkAddrPromiscuousChange */
+
+#ifdef GENESIS
+
+/******************************************************************************
+ *
+ *	SkAddrXmacPromiscuousChange - set promiscuous mode for given port
+ *
+ * Description:
+ *	This routine manages promiscuous mode:
+ *	- none
+ *	- all LLC frames
+ *	- all MC frames
+ *
+ * Context:
+ *	runtime, pageable
+ *	may be called after SK_INIT_IO
+ *
+ * Returns:
+ *	SK_ADDR_SUCCESS
+ *	SK_ADDR_ILLEGAL_PORT
+ */
+static int	SkAddrXmacPromiscuousChange(
+SK_AC	*pAC,			/* adapter context */
+SK_IOC	IoC,			/* I/O context */
+SK_U32	PortNumber,		/* port whose promiscuous mode changes */
+int		NewPromMode)	/* new promiscuous mode */
+{
+	int			i;
+	SK_BOOL		InexactModeBit;
+	SK_U8		Inexact;
+	SK_U8		HwInexact;
+	SK_FILTER64	HwInexactFilter;
+	SK_U16		LoMode;		/* Lower 16 bits of XMAC Mode Register. */
+	int			CurPromMode = SK_PROM_MODE_NONE;
+
+	/* Read CurPromMode from Hardware. */
+	XM_IN16(IoC, PortNumber, XM_MODE, &LoMode);
+
+	if ((LoMode & XM_MD_ENA_PROM) != 0) {
+		/* Promiscuous mode! */
+		CurPromMode |= SK_PROM_MODE_LLC;
+	}
+	
+	for (Inexact = 0xFF, i = 0; i < 8; i++) {
+		Inexact &= pAC->Addr.Port[PortNumber].InexactFilter.Bytes[i];
+	}
+	if (Inexact == 0xFF) {
+		CurPromMode |= (pAC->Addr.Port[PortNumber].PromMode & SK_PROM_MODE_ALL_MC);
+	}
+	else {
+		/* Get InexactModeBit (bit XM_MD_ENA_HASH in mode register) */
+		XM_IN16(IoC, PortNumber, XM_MODE, &LoMode);
+		
+		InexactModeBit = (LoMode & XM_MD_ENA_HASH) != 0;
+
+		/* Read 64-bit hash register from XMAC */
+		XM_INHASH(IoC, PortNumber, XM_HSM, &HwInexactFilter.Bytes[0]);
+
+		for (HwInexact = 0xFF, i = 0; i < 8; i++) {
+			HwInexact &= HwInexactFilter.Bytes[i];
+		}
+
+		if (InexactModeBit && (HwInexact == 0xFF)) {
+			CurPromMode |= SK_PROM_MODE_ALL_MC;
+		}
+	}
+
+	pAC->Addr.Port[PortNumber].PromMode = NewPromMode;
+
+	if (NewPromMode == CurPromMode) {
+		return (SK_ADDR_SUCCESS);
+	}
+
+	if ((NewPromMode & SK_PROM_MODE_ALL_MC) &&
+		!(CurPromMode & SK_PROM_MODE_ALL_MC)) {	/* All MC. */
+		
+		/* Set all bits in 64-bit hash register. */
+		XM_OUTHASH(IoC, PortNumber, XM_HSM, &OnesHash);
+
+		/* Enable Hashing */
+		SkMacHashing(pAC, IoC, (int) PortNumber, SK_TRUE);
+	}
+	else if ((CurPromMode & SK_PROM_MODE_ALL_MC) &&
+		!(NewPromMode & SK_PROM_MODE_ALL_MC)) {	/* Norm MC. */
+		for (Inexact = 0, i = 0; i < 8; i++) {
+			Inexact |= pAC->Addr.Port[PortNumber].InexactFilter.Bytes[i];
+		}
+		if (Inexact == 0) {
+			/* Disable Hashing */
+			SkMacHashing(pAC, IoC, (int) PortNumber, SK_FALSE);
+		}
+		else {
+			/* Set 64-bit hash register to InexactFilter. */
+			XM_OUTHASH(IoC, PortNumber, XM_HSM,
+				&pAC->Addr.Port[PortNumber].InexactFilter.Bytes[0]);
+
+			/* Enable Hashing */
+			SkMacHashing(pAC, IoC, (int) PortNumber, SK_TRUE);
+		}
+	}
+
+	if ((NewPromMode & SK_PROM_MODE_LLC) &&
+		!(CurPromMode & SK_PROM_MODE_LLC)) {	/* Prom. LLC */
+		/* Set the MAC in Promiscuous Mode */
+		SkMacPromiscMode(pAC, IoC, (int) PortNumber, SK_TRUE);
+	}
+	else if ((CurPromMode & SK_PROM_MODE_LLC) &&
+		!(NewPromMode & SK_PROM_MODE_LLC)) {	/* Norm. LLC. */
+		/* Clear Promiscuous Mode */
+		SkMacPromiscMode(pAC, IoC, (int) PortNumber, SK_FALSE);
+	}
+	
+	return (SK_ADDR_SUCCESS);
+	
+}	/* SkAddrXmacPromiscuousChange */
+
+#endif /* GENESIS */
+
+#ifdef YUKON
+
+/******************************************************************************
+ *
+ *	SkAddrGmacPromiscuousChange - set promiscuous mode for given port
+ *
+ * Description:
+ *	This routine manages promiscuous mode:
+ *	- none
+ *	- all LLC frames
+ *	- all MC frames
+ *
+ * Context:
+ *	runtime, pageable
+ *	may be called after SK_INIT_IO
+ *
+ * Returns:
+ *	SK_ADDR_SUCCESS
+ *	SK_ADDR_ILLEGAL_PORT
+ */
+static int	SkAddrGmacPromiscuousChange(
+SK_AC	*pAC,			/* adapter context */
+SK_IOC	IoC,			/* I/O context */
+SK_U32	PortNumber,		/* port whose promiscuous mode changes */
+int		NewPromMode)	/* new promiscuous mode */
+{
+	SK_U16		ReceiveControl;	/* GMAC Receive Control Register */
+	int		CurPromMode = SK_PROM_MODE_NONE;
+
+	/* Read CurPromMode from Hardware. */
+	GM_IN16(IoC, PortNumber, GM_RX_CTRL, &ReceiveControl);
+
+	if ((ReceiveControl & (GM_RXCR_UCF_ENA | GM_RXCR_MCF_ENA)) == 0) {
+		/* Promiscuous mode! */
+		CurPromMode |= SK_PROM_MODE_LLC;
+	}
+
+	if ((ReceiveControl & GM_RXCR_MCF_ENA) == 0) {
+		/* All Multicast mode! */
+		CurPromMode |= (pAC->Addr.Port[PortNumber].PromMode & SK_PROM_MODE_ALL_MC);
+	}
+
+	pAC->Addr.Port[PortNumber].PromMode = NewPromMode;
+
+	if (NewPromMode == CurPromMode) {
+		return (SK_ADDR_SUCCESS);
+	}
+	
+	if ((NewPromMode & SK_PROM_MODE_ALL_MC) &&
+		!(CurPromMode & SK_PROM_MODE_ALL_MC)) {	/* All MC */
+		
+		/* Set all bits in 64-bit hash register. */
+		GM_OUTHASH(IoC, PortNumber, GM_MC_ADDR_H1, &OnesHash);
+		
+		/* Enable Hashing */
+		SkMacHashing(pAC, IoC, (int) PortNumber, SK_TRUE);
+	}
+	
+	if ((CurPromMode & SK_PROM_MODE_ALL_MC) &&
+		!(NewPromMode & SK_PROM_MODE_ALL_MC)) {	/* Norm. MC */
+
+		/* Set 64-bit hash register to InexactFilter. */
+		GM_OUTHASH(IoC, PortNumber, GM_MC_ADDR_H1,
+			&pAC->Addr.Port[PortNumber].InexactFilter.Bytes[0]);
+
+		/* Enable Hashing. */
+		SkMacHashing(pAC, IoC, (int) PortNumber, SK_TRUE);
+	}
+
+	if ((NewPromMode & SK_PROM_MODE_LLC) &&
+		!(CurPromMode & SK_PROM_MODE_LLC)) {	/* Prom. LLC */
+		
+		/* Set the MAC to Promiscuous Mode. */
+		SkMacPromiscMode(pAC, IoC, (int) PortNumber, SK_TRUE);
+	}
+	else if ((CurPromMode & SK_PROM_MODE_LLC) &&
+		!(NewPromMode & SK_PROM_MODE_LLC)) {	/* Norm. LLC */
+		
+		/* Clear Promiscuous Mode. */
+		SkMacPromiscMode(pAC, IoC, (int) PortNumber, SK_FALSE);
+	}
+
+	return (SK_ADDR_SUCCESS);
+	
+}	/* SkAddrGmacPromiscuousChange */
+
+#endif /* YUKON */
+
+#ifndef SK_SLIM
+
+/******************************************************************************
+ *
+ *	SkAddrSwap - swap address info
+ *
+ * Description:
+ *	This routine swaps address info of two ports.
+ *
+ * Context:
+ *	runtime, pageable
+ *	may be called after SK_INIT_IO
+ *
+ * Returns:
+ *	SK_ADDR_SUCCESS
+ *	SK_ADDR_ILLEGAL_PORT
+ */
+int	SkAddrSwap(
+SK_AC	*pAC,			/* adapter context */
+SK_IOC	IoC,			/* I/O context */
+SK_U32	FromPortNumber,		/* Port1 Index */
+SK_U32	ToPortNumber)		/* Port2 Index */
+{
+	int			i;
+	SK_U8		Byte;
+	SK_MAC_ADDR	MacAddr;
+	SK_U32		DWord;
+
+	if (FromPortNumber >= (SK_U32) pAC->GIni.GIMacsFound) {
+		return (SK_ADDR_ILLEGAL_PORT);
+	}
+
+	if (ToPortNumber >= (SK_U32) pAC->GIni.GIMacsFound) {
+		return (SK_ADDR_ILLEGAL_PORT);
+	}
+
+	if (pAC->Rlmt.Port[FromPortNumber].Net != pAC->Rlmt.Port[ToPortNumber].Net) {
+		return (SK_ADDR_ILLEGAL_PORT);
+	}
+
+	/*
+	 * Swap:
+	 * - Exact Match Entries (GEnesis and Yukon)
+	 *   Yukon uses first entry for the logical MAC
+	 *   address (stored in the second GMAC register).
+	 * - FirstExactMatchRlmt (GEnesis only)
+	 * - NextExactMatchRlmt (GEnesis only)
+	 * - FirstExactMatchDrv (GEnesis only)
+	 * - NextExactMatchDrv (GEnesis only)
+	 * - 64-bit filter (InexactFilter)
+	 * - Promiscuous Mode
+	 * of ports.
+	 */
+
+	for (i = 0; i < SK_ADDR_EXACT_MATCHES; i++) {
+		MacAddr = pAC->Addr.Port[FromPortNumber].Exact[i];
+		pAC->Addr.Port[FromPortNumber].Exact[i] =
+			pAC->Addr.Port[ToPortNumber].Exact[i];
+		pAC->Addr.Port[ToPortNumber].Exact[i] = MacAddr;
+	}
+
+	for (i = 0; i < 8; i++) {
+		Byte = pAC->Addr.Port[FromPortNumber].InexactFilter.Bytes[i];
+		pAC->Addr.Port[FromPortNumber].InexactFilter.Bytes[i] =
+			pAC->Addr.Port[ToPortNumber].InexactFilter.Bytes[i];
+		pAC->Addr.Port[ToPortNumber].InexactFilter.Bytes[i] = Byte;
+	}
+	
+	i = pAC->Addr.Port[FromPortNumber].PromMode;
+	pAC->Addr.Port[FromPortNumber].PromMode = pAC->Addr.Port[ToPortNumber].PromMode;
+	pAC->Addr.Port[ToPortNumber].PromMode = i;
+	
+	if (pAC->GIni.GIGenesis) {
+		DWord = pAC->Addr.Port[FromPortNumber].FirstExactMatchRlmt;
+		pAC->Addr.Port[FromPortNumber].FirstExactMatchRlmt =
+			pAC->Addr.Port[ToPortNumber].FirstExactMatchRlmt;
+		pAC->Addr.Port[ToPortNumber].FirstExactMatchRlmt = DWord;
+		
+		DWord = pAC->Addr.Port[FromPortNumber].NextExactMatchRlmt;
+		pAC->Addr.Port[FromPortNumber].NextExactMatchRlmt =
+			pAC->Addr.Port[ToPortNumber].NextExactMatchRlmt;
+		pAC->Addr.Port[ToPortNumber].NextExactMatchRlmt = DWord;
+		
+		DWord = pAC->Addr.Port[FromPortNumber].FirstExactMatchDrv;
+		pAC->Addr.Port[FromPortNumber].FirstExactMatchDrv =
+			pAC->Addr.Port[ToPortNumber].FirstExactMatchDrv;
+		pAC->Addr.Port[ToPortNumber].FirstExactMatchDrv = DWord;
+		
+		DWord = pAC->Addr.Port[FromPortNumber].NextExactMatchDrv;
+		pAC->Addr.Port[FromPortNumber].NextExactMatchDrv =
+			pAC->Addr.Port[ToPortNumber].NextExactMatchDrv;
+		pAC->Addr.Port[ToPortNumber].NextExactMatchDrv = DWord;
+	}
+	
+	/* CAUTION: Solution works if only ports of one adapter are in use. */
+	for (i = 0; (SK_U32) i < pAC->Rlmt.Net[pAC->Rlmt.Port[ToPortNumber].
+		Net->NetNumber].NumPorts; i++) {
+		if (pAC->Rlmt.Net[pAC->Rlmt.Port[ToPortNumber].Net->NetNumber].
+			Port[i]->PortNumber == ToPortNumber) {
+			pAC->Addr.Net[pAC->Rlmt.Port[ToPortNumber].Net->NetNumber].
+				ActivePort = i;
+			/* 20001207 RA: Was "ToPortNumber;". */
+		}
+	}
+	
+	(void) SkAddrMcUpdate(pAC, IoC, FromPortNumber);
+	(void) SkAddrMcUpdate(pAC, IoC, ToPortNumber);
+
+	return (SK_ADDR_SUCCESS);
+	
+}	/* SkAddrSwap */
+
+#endif /* !SK_SLIM */
+
+#ifdef __cplusplus
+}
+#endif	/* __cplusplus */
+
diff --git a/drivers/net/sk98lin/skdim.c b/drivers/net/sk98lin/skdim.c
new file mode 100644
index 0000000..37ce03f
--- /dev/null
+++ b/drivers/net/sk98lin/skdim.c
@@ -0,0 +1,742 @@
+/******************************************************************************
+ *
+ * Name:	skdim.c
+ * Project:	GEnesis, PCI Gigabit Ethernet Adapter
+ * Version:	$Revision: 1.5 $
+ * Date:	$Date: 2003/11/28 12:55:40 $
+ * Purpose:	All functions to maintain interrupt moderation
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *	(C)Copyright 1998-2002 SysKonnect GmbH.
+ *	(C)Copyright 2002-2003 Marvell.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * Description:
+ *
+ * This module is intended to manage the dynamic interrupt moderation on both   
+ * GEnesis and Yukon adapters.
+ *
+ * Include File Hierarchy:
+ *
+ *	"skdrv1st.h"
+ *	"skdrv2nd.h"
+ *
+ ******************************************************************************/
+
+#ifndef	lint
+static const char SysKonnectFileId[] =
+	"@(#) $Id: skdim.c,v 1.5 2003/11/28 12:55:40 rroesler Exp $ (C) SysKonnect.";
+#endif
+
+#define __SKADDR_C
+
+#ifdef __cplusplus
+#error C++ is not yet supported.
+extern "C" {
+#endif
+
+/*******************************************************************************
+**
+** Includes
+**
+*******************************************************************************/
+
+#ifndef __INC_SKDRV1ST_H
+#include "h/skdrv1st.h"
+#endif
+
+#ifndef __INC_SKDRV2ND_H
+#include "h/skdrv2nd.h"
+#endif
+
+#include	<linux/kernel_stat.h>
+
+/*******************************************************************************
+**
+** Defines
+**
+*******************************************************************************/
+
+/*******************************************************************************
+**
+** Typedefs
+**
+*******************************************************************************/
+
+/*******************************************************************************
+**
+** Local function prototypes 
+**
+*******************************************************************************/
+
+static unsigned int GetCurrentSystemLoad(SK_AC *pAC);
+static SK_U64       GetIsrCalls(SK_AC *pAC);
+static SK_BOOL      IsIntModEnabled(SK_AC *pAC);
+static void         SetCurrIntCtr(SK_AC *pAC);
+static void         EnableIntMod(SK_AC *pAC); 
+static void         DisableIntMod(SK_AC *pAC);
+static void         ResizeDimTimerDuration(SK_AC *pAC);
+static void         DisplaySelectedModerationType(SK_AC *pAC);
+static void         DisplaySelectedModerationMask(SK_AC *pAC);
+static void         DisplayDescrRatio(SK_AC *pAC);
+
+/*******************************************************************************
+**
+** Global variables
+**
+*******************************************************************************/
+
+/*******************************************************************************
+**
+** Local variables
+**
+*******************************************************************************/
+
+/*******************************************************************************
+**
+** Global functions 
+**
+*******************************************************************************/
+
+/*******************************************************************************
+** Function     : SkDimModerate
+** Description  : Called in every ISR to check if moderation is to be applied
+**                or not for the current number of interrupts
+** Programmer   : Ralph Roesler
+** Last Modified: 22-mar-03
+** Returns      : void (!)
+** Notes        : -
+*******************************************************************************/
+
+void 
+SkDimModerate(SK_AC *pAC) {
+    unsigned int CurrSysLoad    = 0;  /* expressed in percent */
+    unsigned int LoadIncrease   = 0;  /* expressed in percent */
+    SK_U64       ThresholdInts  = 0;
+    SK_U64       IsrCallsPerSec = 0;
+
+#define M_DIMINFO pAC->DynIrqModInfo
+
+    if (!IsIntModEnabled(pAC)) {
+        if (M_DIMINFO.IntModTypeSelect == C_INT_MOD_DYNAMIC) {
+            CurrSysLoad = GetCurrentSystemLoad(pAC);
+            if (CurrSysLoad > 75) {
+                    /* 
+                    ** More than 75% total system load! Enable the moderation 
+                    ** to shield the system against too many interrupts.
+                    */
+                    EnableIntMod(pAC);
+            } else if (CurrSysLoad > M_DIMINFO.PrevSysLoad) {
+                LoadIncrease = (CurrSysLoad - M_DIMINFO.PrevSysLoad);
+                if (LoadIncrease > ((M_DIMINFO.PrevSysLoad *
+                                         C_INT_MOD_ENABLE_PERCENTAGE) / 100)) {
+                    if (CurrSysLoad > 10) {
+                        /* 
+                        ** More than 50% increase with respect to the 
+                        ** previous load of the system. Most likely this 
+                        ** is due to our ISR-proc...
+                        */
+                        EnableIntMod(pAC);
+                    }
+                }
+            } else {
+                /*
+                ** Neither too much system load at all nor too much increase
+                ** with respect to the previous system load. Hence, we can leave
+                ** the ISR-handling like it is without enabling moderation.
+                */
+            }
+            M_DIMINFO.PrevSysLoad = CurrSysLoad;
+        }   
+    } else {
+        if (M_DIMINFO.IntModTypeSelect == C_INT_MOD_DYNAMIC) {
+            ThresholdInts  = ((M_DIMINFO.MaxModIntsPerSec *
+                                   C_INT_MOD_DISABLE_PERCENTAGE) / 100);
+            IsrCallsPerSec = GetIsrCalls(pAC);
+            if (IsrCallsPerSec <= ThresholdInts) {
+                /* 
+                ** The number of interrupts within the last second is 
+                ** lower than the disable_percentage of the desried 
+                ** maxrate. Therefore we can disable the moderation.
+                */
+                DisableIntMod(pAC);
+                M_DIMINFO.MaxModIntsPerSec = 
+                   (M_DIMINFO.MaxModIntsPerSecUpperLimit +
+                    M_DIMINFO.MaxModIntsPerSecLowerLimit) / 2;
+            } else {
+                /*
+                ** The number of interrupts per sec is the same as expected.
+                ** Evalulate the descriptor-ratio. If it has changed, a resize 
+                ** in the moderation timer might be useful
+                */
+                if (M_DIMINFO.AutoSizing) {
+                    ResizeDimTimerDuration(pAC);
+                }
+            }
+        }
+    }
+
+    /*
+    ** Some information to the log...
+    */
+    if (M_DIMINFO.DisplayStats) {
+        DisplaySelectedModerationType(pAC);
+        DisplaySelectedModerationMask(pAC);
+        DisplayDescrRatio(pAC);
+    }
+
+    M_DIMINFO.NbrProcessedDescr = 0; 
+    SetCurrIntCtr(pAC);
+}
+
+/*******************************************************************************
+** Function     : SkDimStartModerationTimer
+** Description  : Starts the audit-timer for the dynamic interrupt moderation
+** Programmer   : Ralph Roesler
+** Last Modified: 22-mar-03
+** Returns      : void (!)
+** Notes        : -
+*******************************************************************************/
+
+void 
+SkDimStartModerationTimer(SK_AC *pAC) {
+    SK_EVPARA    EventParam;   /* Event struct for timer event */
+ 
+    SK_MEMSET((char *) &EventParam, 0, sizeof(EventParam));
+    EventParam.Para32[0] = SK_DRV_MODERATION_TIMER;
+    SkTimerStart(pAC, pAC->IoBase, &pAC->DynIrqModInfo.ModTimer,
+                 SK_DRV_MODERATION_TIMER_LENGTH,
+                 SKGE_DRV, SK_DRV_TIMER, EventParam);
+}
+
+/*******************************************************************************
+** Function     : SkDimEnableModerationIfNeeded
+** Description  : Either enables or disables moderation
+** Programmer   : Ralph Roesler
+** Last Modified: 22-mar-03
+** Returns      : void (!)
+** Notes        : This function is called when a particular adapter is opened
+**                There is no Disable function, because when all interrupts 
+**                might be disable, the moderation timer has no meaning at all
+******************************************************************************/
+
+void
+SkDimEnableModerationIfNeeded(SK_AC *pAC) {
+
+    if (M_DIMINFO.IntModTypeSelect == C_INT_MOD_STATIC) {
+        EnableIntMod(pAC);   /* notification print in this function */
+    } else if (M_DIMINFO.IntModTypeSelect == C_INT_MOD_DYNAMIC) {
+        SkDimStartModerationTimer(pAC);
+        if (M_DIMINFO.DisplayStats) {
+            printk("Dynamic moderation has been enabled\n");
+        }
+    } else {
+        if (M_DIMINFO.DisplayStats) {
+            printk("No moderation has been enabled\n");
+        }
+    }
+}
+
+/*******************************************************************************
+** Function     : SkDimDisplayModerationSettings
+** Description  : Displays the current settings regarding interrupt moderation
+** Programmer   : Ralph Roesler
+** Last Modified: 22-mar-03
+** Returns      : void (!)
+** Notes        : -
+*******************************************************************************/
+
+void 
+SkDimDisplayModerationSettings(SK_AC *pAC) {
+    DisplaySelectedModerationType(pAC);
+    DisplaySelectedModerationMask(pAC);
+}
+
+/*******************************************************************************
+**
+** Local functions 
+**
+*******************************************************************************/
+
+/*******************************************************************************
+** Function     : GetCurrentSystemLoad
+** Description  : Retrieves the current system load of the system. This load
+**                is evaluated for all processors within the system.
+** Programmer   : Ralph Roesler
+** Last Modified: 22-mar-03
+** Returns      : unsigned int: load expressed in percentage
+** Notes        : The possible range being returned is from 0 up to 100.
+**                Whereas 0 means 'no load at all' and 100 'system fully loaded'
+**                It is impossible to determine what actually causes the system
+**                to be in 100%, but maybe that is due to too much interrupts.
+*******************************************************************************/
+
+static unsigned int
+GetCurrentSystemLoad(SK_AC *pAC) {
+	unsigned long jif         = jiffies;
+	unsigned int  UserTime    = 0;
+	unsigned int  SystemTime  = 0;
+	unsigned int  NiceTime    = 0;
+	unsigned int  IdleTime    = 0;
+	unsigned int  TotalTime   = 0;
+	unsigned int  UsedTime    = 0;
+	unsigned int  SystemLoad  = 0;
+
+	/* unsigned int  NbrCpu      = 0; */
+
+	/*
+	** The following lines have been commented out, because
+	** from kernel 2.5.44 onwards, the kernel-owned structure
+	**
+	**      struct kernel_stat kstat
+	**
+	** is not marked as an exported symbol in the file
+	**
+	**      kernel/ksyms.c 
+	**
+	** As a consequence, using this driver as KLM is not possible
+	** and any access of the structure kernel_stat via the 
+	** dedicated macros kstat_cpu(i).cpustat.xxx is to be avoided.
+	**
+	** The kstat-information might be added again in future 
+	** versions of the 2.5.xx kernel, but for the time being, 
+	** number of interrupts will serve as indication how much 
+	** load we currently have... 
+	**
+	** for (NbrCpu = 0; NbrCpu < num_online_cpus(); NbrCpu++) {
+	**	UserTime   = UserTime   + kstat_cpu(NbrCpu).cpustat.user;
+	**	NiceTime   = NiceTime   + kstat_cpu(NbrCpu).cpustat.nice;
+	**	SystemTime = SystemTime + kstat_cpu(NbrCpu).cpustat.system;
+	** }
+	*/
+	SK_U64 ThresholdInts  = 0;
+	SK_U64 IsrCallsPerSec = 0;
+
+	ThresholdInts  = ((M_DIMINFO.MaxModIntsPerSec *
+			   C_INT_MOD_ENABLE_PERCENTAGE) + 100);
+	IsrCallsPerSec = GetIsrCalls(pAC);
+	if (IsrCallsPerSec >= ThresholdInts) {
+	    /*
+	    ** We do not know how much the real CPU-load is!
+	    ** Return 80% as a default in order to activate DIM
+	    */
+	    SystemLoad = 80;
+	    return (SystemLoad);  
+	} 
+
+	UsedTime  = UserTime + NiceTime + SystemTime;
+
+	IdleTime  = jif * num_online_cpus() - UsedTime;
+	TotalTime = UsedTime + IdleTime;
+
+	SystemLoad = ( 100 * (UsedTime  - M_DIMINFO.PrevUsedTime) ) /
+						(TotalTime - M_DIMINFO.PrevTotalTime);
+
+	if (M_DIMINFO.DisplayStats) {
+		printk("Current system load is: %u\n", SystemLoad);
+	}
+
+	M_DIMINFO.PrevTotalTime = TotalTime;
+	M_DIMINFO.PrevUsedTime  = UsedTime;
+
+	return (SystemLoad);
+}
+
+/*******************************************************************************
+** Function     : GetIsrCalls
+** Description  : Depending on the selected moderation mask, this function will
+**                return the number of interrupts handled in the previous time-
+**                frame. This evaluated number is based on the current number 
+**                of interrupts stored in PNMI-context and the previous stored 
+**                interrupts.
+** Programmer   : Ralph Roesler
+** Last Modified: 23-mar-03
+** Returns      : int:   the number of interrupts being executed in the last
+**                       timeframe
+** Notes        : It makes only sense to call this function, when dynamic 
+**                interrupt moderation is applied
+*******************************************************************************/
+
+static SK_U64
+GetIsrCalls(SK_AC *pAC) {
+    SK_U64   RxPort0IntDiff = 0;
+    SK_U64   RxPort1IntDiff = 0;
+    SK_U64   TxPort0IntDiff = 0;
+    SK_U64   TxPort1IntDiff = 0;
+
+    if (pAC->DynIrqModInfo.MaskIrqModeration == IRQ_MASK_TX_ONLY) {
+        if (pAC->GIni.GIMacsFound == 2) {
+            TxPort1IntDiff = pAC->Pnmi.Port[1].TxIntrCts - 
+                             pAC->DynIrqModInfo.PrevPort1TxIntrCts;
+        }
+        TxPort0IntDiff = pAC->Pnmi.Port[0].TxIntrCts - 
+                         pAC->DynIrqModInfo.PrevPort0TxIntrCts;
+    } else if (pAC->DynIrqModInfo.MaskIrqModeration == IRQ_MASK_RX_ONLY) {
+        if (pAC->GIni.GIMacsFound == 2) {
+            RxPort1IntDiff = pAC->Pnmi.Port[1].RxIntrCts - 
+                             pAC->DynIrqModInfo.PrevPort1RxIntrCts;
+        }
+        RxPort0IntDiff = pAC->Pnmi.Port[0].RxIntrCts - 
+                         pAC->DynIrqModInfo.PrevPort0RxIntrCts;
+    } else {
+        if (pAC->GIni.GIMacsFound == 2) {
+            RxPort1IntDiff = pAC->Pnmi.Port[1].RxIntrCts - 
+                             pAC->DynIrqModInfo.PrevPort1RxIntrCts;
+            TxPort1IntDiff = pAC->Pnmi.Port[1].TxIntrCts - 
+                             pAC->DynIrqModInfo.PrevPort1TxIntrCts;
+        } 
+        RxPort0IntDiff = pAC->Pnmi.Port[0].RxIntrCts - 
+                         pAC->DynIrqModInfo.PrevPort0RxIntrCts;
+        TxPort0IntDiff = pAC->Pnmi.Port[0].TxIntrCts - 
+                         pAC->DynIrqModInfo.PrevPort0TxIntrCts;
+    }
+
+    return (RxPort0IntDiff + RxPort1IntDiff + TxPort0IntDiff + TxPort1IntDiff);
+}
+
+/*******************************************************************************
+** Function     : GetRxCalls
+** Description  : This function will return the number of times a receive inter-
+**                rupt was processed. This is needed to evaluate any resizing 
+**                factor.
+** Programmer   : Ralph Roesler
+** Last Modified: 23-mar-03
+** Returns      : SK_U64: the number of RX-ints being processed
+** Notes        : It makes only sense to call this function, when dynamic 
+**                interrupt moderation is applied
+*******************************************************************************/
+
+static SK_U64
+GetRxCalls(SK_AC *pAC) {
+    SK_U64   RxPort0IntDiff = 0;
+    SK_U64   RxPort1IntDiff = 0;
+
+    if (pAC->GIni.GIMacsFound == 2) {
+        RxPort1IntDiff = pAC->Pnmi.Port[1].RxIntrCts - 
+                         pAC->DynIrqModInfo.PrevPort1RxIntrCts;
+    }
+    RxPort0IntDiff = pAC->Pnmi.Port[0].RxIntrCts - 
+                     pAC->DynIrqModInfo.PrevPort0RxIntrCts;
+
+    return (RxPort0IntDiff + RxPort1IntDiff);
+}
+
+/*******************************************************************************
+** Function     : SetCurrIntCtr
+** Description  : Will store the current number orf occured interrupts in the 
+**                adapter context. This is needed to evaluated the number of 
+**                interrupts within a current timeframe.
+** Programmer   : Ralph Roesler
+** Last Modified: 23-mar-03
+** Returns      : void (!)
+** Notes        : -
+*******************************************************************************/
+
+static void
+SetCurrIntCtr(SK_AC *pAC) {
+    if (pAC->GIni.GIMacsFound == 2) {
+        pAC->DynIrqModInfo.PrevPort1RxIntrCts = pAC->Pnmi.Port[1].RxIntrCts;
+        pAC->DynIrqModInfo.PrevPort1TxIntrCts = pAC->Pnmi.Port[1].TxIntrCts;
+    } 
+    pAC->DynIrqModInfo.PrevPort0RxIntrCts = pAC->Pnmi.Port[0].RxIntrCts;
+    pAC->DynIrqModInfo.PrevPort0TxIntrCts = pAC->Pnmi.Port[0].TxIntrCts;
+}
+
+/*******************************************************************************
+** Function     : IsIntModEnabled()
+** Description  : Retrieves the current value of the interrupts moderation
+**                command register. Its content determines whether any 
+**                moderation is running or not.
+** Programmer   : Ralph Roesler
+** Last Modified: 23-mar-03
+** Returns      : SK_TRUE  : if mod timer running
+**                SK_FALSE : if no moderation is being performed
+** Notes        : -
+*******************************************************************************/
+
+static SK_BOOL
+IsIntModEnabled(SK_AC *pAC) {
+    unsigned long CtrCmd;
+
+    SK_IN32(pAC->IoBase, B2_IRQM_CTRL, &CtrCmd);
+    if ((CtrCmd & TIM_START) == TIM_START) {
+       return SK_TRUE;
+    } else {
+       return SK_FALSE;
+    }
+}
+
+/*******************************************************************************
+** Function     : EnableIntMod()
+** Description  : Enables the interrupt moderation using the values stored in
+**                in the pAC->DynIntMod data structure
+** Programmer   : Ralph Roesler
+** Last Modified: 22-mar-03
+** Returns      : -
+** Notes        : -
+*******************************************************************************/
+
+static void
+EnableIntMod(SK_AC *pAC) {
+    unsigned long ModBase;
+
+    if (pAC->GIni.GIChipId == CHIP_ID_GENESIS) {
+       ModBase = C_CLK_FREQ_GENESIS / pAC->DynIrqModInfo.MaxModIntsPerSec;
+    } else {
+       ModBase = C_CLK_FREQ_YUKON / pAC->DynIrqModInfo.MaxModIntsPerSec;
+    }
+
+    SK_OUT32(pAC->IoBase, B2_IRQM_INI,  ModBase);
+    SK_OUT32(pAC->IoBase, B2_IRQM_MSK,  pAC->DynIrqModInfo.MaskIrqModeration);
+    SK_OUT32(pAC->IoBase, B2_IRQM_CTRL, TIM_START);
+    if (M_DIMINFO.DisplayStats) {
+        printk("Enabled interrupt moderation (%i ints/sec)\n",
+               M_DIMINFO.MaxModIntsPerSec);
+    }
+}
+
+/*******************************************************************************
+** Function     : DisableIntMod()
+** Description  : Disables the interrupt moderation independent of what inter-
+**                rupts are running or not
+** Programmer   : Ralph Roesler
+** Last Modified: 23-mar-03
+** Returns      : -
+** Notes        : -
+*******************************************************************************/
+
+static void 
+DisableIntMod(SK_AC *pAC) {
+
+    SK_OUT32(pAC->IoBase, B2_IRQM_CTRL, TIM_STOP);
+    if (M_DIMINFO.DisplayStats) {
+        printk("Disabled interrupt moderation\n");
+    }
+} 
+
+/*******************************************************************************
+** Function     : ResizeDimTimerDuration();
+** Description  : Checks the current used descriptor ratio and resizes the 
+**                duration timer (longer/smaller) if possible. 
+** Programmer   : Ralph Roesler
+** Last Modified: 23-mar-03
+** Returns      : -
+** Notes        : There are both maximum and minimum timer duration value. 
+**                This function assumes that interrupt moderation is already
+**                enabled!
+*******************************************************************************/
+
+static void 
+ResizeDimTimerDuration(SK_AC *pAC) {
+    SK_BOOL IncreaseTimerDuration;
+    int     TotalMaxNbrDescr;
+    int     UsedDescrRatio;
+    int     RatioDiffAbs;
+    int     RatioDiffRel;
+    int     NewMaxModIntsPerSec;
+    int     ModAdjValue;
+    long    ModBase;
+
+    /*
+    ** Check first if we are allowed to perform any modification
+    */
+    if (IsIntModEnabled(pAC)) { 
+        if (M_DIMINFO.IntModTypeSelect != C_INT_MOD_DYNAMIC) {
+            return; 
+        } else {
+            if (M_DIMINFO.ModJustEnabled) {
+                M_DIMINFO.ModJustEnabled = SK_FALSE;
+                return;
+            }
+        }
+    }
+
+    /*
+    ** If we got until here, we have to evaluate the amount of the
+    ** descriptor ratio change...
+    */
+    TotalMaxNbrDescr = pAC->RxDescrPerRing * GetRxCalls(pAC);
+    UsedDescrRatio   = (M_DIMINFO.NbrProcessedDescr * 100) / TotalMaxNbrDescr;
+
+    if (UsedDescrRatio > M_DIMINFO.PrevUsedDescrRatio) {
+        RatioDiffAbs = (UsedDescrRatio - M_DIMINFO.PrevUsedDescrRatio);
+        RatioDiffRel = (RatioDiffAbs * 100) / UsedDescrRatio;
+        M_DIMINFO.PrevUsedDescrRatio = UsedDescrRatio;
+        IncreaseTimerDuration = SK_FALSE;  /* in other words: DECREASE */
+    } else if (UsedDescrRatio < M_DIMINFO.PrevUsedDescrRatio) {
+        RatioDiffAbs = (M_DIMINFO.PrevUsedDescrRatio - UsedDescrRatio);
+        RatioDiffRel = (RatioDiffAbs * 100) / M_DIMINFO.PrevUsedDescrRatio;
+        M_DIMINFO.PrevUsedDescrRatio = UsedDescrRatio;
+        IncreaseTimerDuration = SK_TRUE;   /* in other words: INCREASE */
+    } else {
+        RatioDiffAbs = (M_DIMINFO.PrevUsedDescrRatio - UsedDescrRatio);
+        RatioDiffRel = (RatioDiffAbs * 100) / M_DIMINFO.PrevUsedDescrRatio;
+        M_DIMINFO.PrevUsedDescrRatio = UsedDescrRatio;
+        IncreaseTimerDuration = SK_TRUE;   /* in other words: INCREASE */
+    }
+
+    /*
+    ** Now we can determine the change in percent
+    */
+    if ((RatioDiffRel >= 0) && (RatioDiffRel <= 5) ) {
+       ModAdjValue = 1;  /*  1% change - maybe some other value in future */
+    } else if ((RatioDiffRel > 5) && (RatioDiffRel <= 10) ) {
+       ModAdjValue = 1;  /*  1% change - maybe some other value in future */
+    } else if ((RatioDiffRel > 10) && (RatioDiffRel <= 15) ) {
+       ModAdjValue = 1;  /*  1% change - maybe some other value in future */
+    } else {
+       ModAdjValue = 1;  /*  1% change - maybe some other value in future */
+    }
+
+    if (IncreaseTimerDuration) {
+       NewMaxModIntsPerSec =  M_DIMINFO.MaxModIntsPerSec +
+                             (M_DIMINFO.MaxModIntsPerSec * ModAdjValue) / 100;
+    } else {
+       NewMaxModIntsPerSec =  M_DIMINFO.MaxModIntsPerSec -
+                             (M_DIMINFO.MaxModIntsPerSec * ModAdjValue) / 100;
+    }
+
+    /* 
+    ** Check if we exceed boundaries...
+    */
+    if ( (NewMaxModIntsPerSec > M_DIMINFO.MaxModIntsPerSecUpperLimit) ||
+         (NewMaxModIntsPerSec < M_DIMINFO.MaxModIntsPerSecLowerLimit)) {
+        if (M_DIMINFO.DisplayStats) {
+            printk("Cannot change ModTim from %i to %i ints/sec\n",
+                   M_DIMINFO.MaxModIntsPerSec, NewMaxModIntsPerSec);
+        }
+        return;
+    } else {
+        if (M_DIMINFO.DisplayStats) {
+            printk("Resized ModTim from %i to %i ints/sec\n",
+                   M_DIMINFO.MaxModIntsPerSec, NewMaxModIntsPerSec);
+        }
+    }
+
+    M_DIMINFO.MaxModIntsPerSec = NewMaxModIntsPerSec;
+
+    if (pAC->GIni.GIChipId == CHIP_ID_GENESIS) {
+        ModBase = C_CLK_FREQ_GENESIS / pAC->DynIrqModInfo.MaxModIntsPerSec;
+    } else {
+        ModBase = C_CLK_FREQ_YUKON / pAC->DynIrqModInfo.MaxModIntsPerSec;
+    }
+
+    /* 
+    ** We do not need to touch any other registers
+    */
+    SK_OUT32(pAC->IoBase, B2_IRQM_INI, ModBase);
+} 
+
+/*******************************************************************************
+** Function     : DisplaySelectedModerationType()
+** Description  : Displays what type of moderation we have
+** Programmer   : Ralph Roesler
+** Last Modified: 23-mar-03
+** Returns      : void!
+** Notes        : -
+*******************************************************************************/
+
+static void
+DisplaySelectedModerationType(SK_AC *pAC) {
+
+    if (pAC->DynIrqModInfo.DisplayStats) {
+        if (pAC->DynIrqModInfo.IntModTypeSelect == C_INT_MOD_STATIC) {
+             printk("Static int moderation runs with %i INTS/sec\n",
+                    pAC->DynIrqModInfo.MaxModIntsPerSec);
+        } else if (pAC->DynIrqModInfo.IntModTypeSelect == C_INT_MOD_DYNAMIC) {
+             if (IsIntModEnabled(pAC)) {
+                printk("Dynamic int moderation runs with %i INTS/sec\n",
+                       pAC->DynIrqModInfo.MaxModIntsPerSec);
+             } else {
+                printk("Dynamic int moderation currently not applied\n");
+             }
+        } else {
+             printk("No interrupt moderation selected!\n");
+        }
+    }
+}
+
+/*******************************************************************************
+** Function     : DisplaySelectedModerationMask()
+** Description  : Displays what interrupts are moderated
+** Programmer   : Ralph Roesler
+** Last Modified: 23-mar-03
+** Returns      : void!
+** Notes        : -
+*******************************************************************************/
+
+static void
+DisplaySelectedModerationMask(SK_AC *pAC) {
+
+    if (pAC->DynIrqModInfo.DisplayStats) {
+        if (pAC->DynIrqModInfo.IntModTypeSelect != C_INT_MOD_NONE) {
+            switch (pAC->DynIrqModInfo.MaskIrqModeration) {
+                case IRQ_MASK_TX_ONLY: 
+                   printk("Only Tx-interrupts are moderated\n");
+                   break;
+                case IRQ_MASK_RX_ONLY: 
+                   printk("Only Rx-interrupts are moderated\n");
+                   break;
+                case IRQ_MASK_SP_ONLY: 
+                   printk("Only special-interrupts are moderated\n");
+                   break;
+                case IRQ_MASK_TX_RX: 
+                   printk("Tx- and Rx-interrupts are moderated\n");
+                   break;
+                case IRQ_MASK_SP_RX: 
+                   printk("Special- and Rx-interrupts are moderated\n");
+                   break;
+                case IRQ_MASK_SP_TX: 
+                   printk("Special- and Tx-interrupts are moderated\n");
+                   break;
+                case IRQ_MASK_RX_TX_SP:
+                   printk("All Rx-, Tx and special-interrupts are moderated\n");
+                   break;
+                default:
+                   printk("Don't know what is moderated\n");
+                   break;
+            }
+        } else {
+            printk("No specific interrupts masked for moderation\n");
+        }
+    } 
+}
+
+/*******************************************************************************
+** Function     : DisplayDescrRatio
+** Description  : Like the name states...
+** Programmer   : Ralph Roesler
+** Last Modified: 23-mar-03
+** Returns      : void!
+** Notes        : -
+*******************************************************************************/
+
+static void
+DisplayDescrRatio(SK_AC *pAC) {
+    int TotalMaxNbrDescr = 0;
+
+    if (pAC->DynIrqModInfo.DisplayStats) {
+        TotalMaxNbrDescr = pAC->RxDescrPerRing * GetRxCalls(pAC);
+        printk("Ratio descriptors: %i/%i\n",
+               M_DIMINFO.NbrProcessedDescr, TotalMaxNbrDescr);
+    }
+}
+
+/*******************************************************************************
+**
+** End of file
+**
+*******************************************************************************/
diff --git a/drivers/net/sk98lin/skethtool.c b/drivers/net/sk98lin/skethtool.c
new file mode 100644
index 0000000..5a6da89
--- /dev/null
+++ b/drivers/net/sk98lin/skethtool.c
@@ -0,0 +1,627 @@
+/******************************************************************************
+ *
+ * Name:        skethtool.c
+ * Project:     GEnesis, PCI Gigabit Ethernet Adapter
+ * Version:     $Revision: 1.7 $
+ * Date:        $Date: 2004/09/29 13:32:07 $
+ * Purpose:     All functions regarding ethtool handling
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *	(C)Copyright 1998-2002 SysKonnect GmbH.
+ *	(C)Copyright 2002-2004 Marvell.
+ *
+ *	Driver for Marvell Yukon/2 chipset and SysKonnect Gigabit Ethernet 
+ *      Server Adapters.
+ *
+ *	Author: Ralph Roesler (rroesler@syskonnect.de)
+ *	        Mirko Lindner (mlindner@syskonnect.de)
+ *
+ *	Address all question to: linux@syskonnect.de
+ *
+ *	The technical manual for the adapters is available from SysKonnect's
+ *	web pages: www.syskonnect.com
+ *	
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ *****************************************************************************/
+
+#include "h/skdrv1st.h"
+#include "h/skdrv2nd.h"
+#include "h/skversion.h"
+
+#include <linux/ethtool.h>
+#include <linux/timer.h>
+#include <linux/delay.h>
+
+/******************************************************************************
+ *
+ * Defines
+ *
+ *****************************************************************************/
+
+#define SUPP_COPPER_ALL (SUPPORTED_10baseT_Half  | SUPPORTED_10baseT_Full  | \
+                         SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full | \
+                         SUPPORTED_1000baseT_Half| SUPPORTED_1000baseT_Full| \
+                         SUPPORTED_TP)
+
+#define ADV_COPPER_ALL  (ADVERTISED_10baseT_Half  | ADVERTISED_10baseT_Full  | \
+                         ADVERTISED_100baseT_Half | ADVERTISED_100baseT_Full | \
+                         ADVERTISED_1000baseT_Half| ADVERTISED_1000baseT_Full| \
+                         ADVERTISED_TP)
+
+#define SUPP_FIBRE_ALL  (SUPPORTED_1000baseT_Full | \
+                         SUPPORTED_FIBRE          | \
+                         SUPPORTED_Autoneg)
+
+#define ADV_FIBRE_ALL   (ADVERTISED_1000baseT_Full | \
+                         ADVERTISED_FIBRE          | \
+                         ADVERTISED_Autoneg)
+
+
+/******************************************************************************
+ *
+ * Local Functions
+ *
+ *****************************************************************************/
+
+/*****************************************************************************
+ *
+ * 	getSettings - retrieves the current settings of the selected adapter
+ *
+ * Description:
+ *	The current configuration of the selected adapter is returned.
+ *	This configuration involves a)speed, b)duplex and c)autoneg plus
+ *	a number of other variables.
+ *
+ * Returns:    always 0
+ *
+ */
+static int getSettings(struct net_device *dev, struct ethtool_cmd *ecmd)
+{
+	const DEV_NET *pNet = netdev_priv(dev);
+	int port = pNet->PortNr;
+	const SK_AC *pAC = pNet->pAC;
+	const SK_GEPORT *pPort = &pAC->GIni.GP[port];
+
+	static int DuplexAutoNegConfMap[9][3]= {
+		{ -1                     , -1         , -1              },
+		{ 0                      , -1         , -1              },
+		{ SK_LMODE_HALF          , DUPLEX_HALF, AUTONEG_DISABLE },
+		{ SK_LMODE_FULL          , DUPLEX_FULL, AUTONEG_DISABLE },
+		{ SK_LMODE_AUTOHALF      , DUPLEX_HALF, AUTONEG_ENABLE  },
+		{ SK_LMODE_AUTOFULL      , DUPLEX_FULL, AUTONEG_ENABLE  },
+		{ SK_LMODE_AUTOBOTH      , DUPLEX_FULL, AUTONEG_ENABLE  },
+		{ SK_LMODE_AUTOSENSE     , -1         , -1              },
+		{ SK_LMODE_INDETERMINATED, -1         , -1              }
+	};
+	static int SpeedConfMap[6][2] = {
+		{ 0                       , -1         },
+		{ SK_LSPEED_AUTO          , -1         },
+		{ SK_LSPEED_10MBPS        , SPEED_10   },
+		{ SK_LSPEED_100MBPS       , SPEED_100  },
+		{ SK_LSPEED_1000MBPS      , SPEED_1000 },
+		{ SK_LSPEED_INDETERMINATED, -1         }
+	};
+	static int AdvSpeedMap[6][2] = {
+		{ 0                       , -1         },
+		{ SK_LSPEED_AUTO          , -1         },
+		{ SK_LSPEED_10MBPS        , ADVERTISED_10baseT_Half   | ADVERTISED_10baseT_Full },
+		{ SK_LSPEED_100MBPS       , ADVERTISED_100baseT_Half  | ADVERTISED_100baseT_Full },
+		{ SK_LSPEED_1000MBPS      , ADVERTISED_1000baseT_Half | ADVERTISED_1000baseT_Full},
+		{ SK_LSPEED_INDETERMINATED, -1         }
+	};
+
+	ecmd->phy_address = port;
+	ecmd->speed       = SpeedConfMap[pPort->PLinkSpeedUsed][1];
+	ecmd->duplex      = DuplexAutoNegConfMap[pPort->PLinkModeStatus][1];
+	ecmd->autoneg     = DuplexAutoNegConfMap[pPort->PLinkModeStatus][2];
+	ecmd->transceiver = XCVR_INTERNAL;
+
+	if (pAC->GIni.GICopperType) {
+		ecmd->port        = PORT_TP;
+		ecmd->supported   = (SUPP_COPPER_ALL|SUPPORTED_Autoneg);
+		if (pAC->GIni.GIGenesis) {
+			ecmd->supported &= ~(SUPPORTED_10baseT_Half);
+			ecmd->supported &= ~(SUPPORTED_10baseT_Full);
+			ecmd->supported &= ~(SUPPORTED_100baseT_Half);
+			ecmd->supported &= ~(SUPPORTED_100baseT_Full);
+		} else {
+			if (pAC->GIni.GIChipId == CHIP_ID_YUKON) {
+				ecmd->supported &= ~(SUPPORTED_1000baseT_Half);
+			} 
+#ifdef CHIP_ID_YUKON_FE
+			if (pAC->GIni.GIChipId == CHIP_ID_YUKON_FE) {
+				ecmd->supported &= ~(SUPPORTED_1000baseT_Half);
+				ecmd->supported &= ~(SUPPORTED_1000baseT_Full);
+			}
+#endif
+		}
+		if (pAC->GIni.GP[0].PLinkSpeed != SK_LSPEED_AUTO) {
+			ecmd->advertising = AdvSpeedMap[pPort->PLinkSpeed][1];
+			if (pAC->GIni.GIChipId == CHIP_ID_YUKON) {
+				ecmd->advertising &= ~(SUPPORTED_1000baseT_Half);
+			} 
+		} else {
+			ecmd->advertising = ecmd->supported;
+		}
+
+		if (ecmd->autoneg == AUTONEG_ENABLE) 
+			ecmd->advertising |= ADVERTISED_Autoneg;
+	} else {
+		ecmd->port        = PORT_FIBRE;
+		ecmd->supported   = SUPP_FIBRE_ALL;
+		ecmd->advertising = ADV_FIBRE_ALL;
+	}
+	return 0;
+}
+
+/*
+ * MIB infrastructure uses instance value starting at 1
+ * based on board and port.
+ */
+static inline u32 pnmiInstance(const DEV_NET *pNet)
+{
+	return 1 + (pNet->pAC->RlmtNets == 2) + pNet->PortNr;
+}
+
+/*****************************************************************************
+ *
+ *	setSettings - configures the settings of a selected adapter
+ *
+ * Description:
+ *	Possible settings that may be altered are a)speed, b)duplex or 
+ *	c)autonegotiation.
+ *
+ * Returns:
+ *	0:	everything fine, no error
+ *	<0:	the return value is the error code of the failure 
+ */
+static int setSettings(struct net_device *dev, struct ethtool_cmd *ecmd)
+{
+	DEV_NET *pNet = netdev_priv(dev);
+	SK_AC *pAC = pNet->pAC;
+	u32 instance;
+	char buf[4];
+	int len = 1;
+
+	if (ecmd->speed != SPEED_10 && ecmd->speed != SPEED_100 
+	    && ecmd->speed != SPEED_1000)
+		return -EINVAL;
+
+	if (ecmd->duplex != DUPLEX_HALF && ecmd->duplex != DUPLEX_FULL)
+		return -EINVAL;
+
+	if (ecmd->autoneg != AUTONEG_DISABLE && ecmd->autoneg != AUTONEG_ENABLE)
+		return -EINVAL;
+
+	if (ecmd->autoneg == AUTONEG_DISABLE)
+		*buf = (ecmd->duplex == DUPLEX_FULL) 
+			? SK_LMODE_FULL : SK_LMODE_HALF;
+	else
+		*buf = (ecmd->duplex == DUPLEX_FULL) 
+			? SK_LMODE_AUTOFULL : SK_LMODE_AUTOHALF;
+	
+	instance = pnmiInstance(pNet);
+	if (SkPnmiSetVar(pAC, pAC->IoBase, OID_SKGE_LINK_MODE, 
+			   &buf, &len, instance, pNet->NetNr) != SK_PNMI_ERR_OK)
+		return -EINVAL;
+
+	switch(ecmd->speed) {
+	case SPEED_1000:
+		*buf = SK_LSPEED_1000MBPS;
+		break;
+	case SPEED_100:
+		*buf = SK_LSPEED_100MBPS;
+		break;
+	case SPEED_10:
+		*buf = SK_LSPEED_10MBPS;
+	}
+
+	if (SkPnmiSetVar(pAC, pAC->IoBase, OID_SKGE_SPEED_MODE, 
+			 &buf, &len, instance, pNet->NetNr) != SK_PNMI_ERR_OK)
+		return -EINVAL;
+
+	return 0;
+}
+
+/*****************************************************************************
+ *
+ * 	getDriverInfo - returns generic driver and adapter information
+ *
+ * Description:
+ *	Generic driver information is returned via this function, such as
+ *	the name of the driver, its version and and firmware version.
+ *	In addition to this, the location of the selected adapter is 
+ *	returned as a bus info string (e.g. '01:05.0').
+ *	
+ * Returns:	N/A
+ *
+ */
+static void getDriverInfo(struct net_device *dev, struct ethtool_drvinfo *info)
+{
+	const DEV_NET	*pNet = netdev_priv(dev);
+	const SK_AC *pAC = pNet->pAC;
+	char vers[32];
+
+	snprintf(vers, sizeof(vers)-1, VER_STRING "(v%d.%d)",
+		(pAC->GIni.GIPciHwRev >> 4) & 0xf, pAC->GIni.GIPciHwRev & 0xf);
+
+	strlcpy(info->driver, DRIVER_FILE_NAME, sizeof(info->driver));
+	strcpy(info->version, vers);
+	strcpy(info->fw_version, "N/A");
+	strlcpy(info->bus_info, pci_name(pAC->PciDev), ETHTOOL_BUSINFO_LEN);
+}
+
+/*
+ * Ethtool statistics support.
+ */
+static const char StringsStats[][ETH_GSTRING_LEN] = {
+	"rx_packets",	"tx_packets",
+	"rx_bytes",	"tx_bytes",
+	"rx_errors",	"tx_errors",	
+	"rx_dropped",	"tx_dropped",
+	"multicasts",	"collisions",	
+	"rx_length_errors",		"rx_buffer_overflow_errors",
+	"rx_crc_errors",		"rx_frame_errors",
+	"rx_too_short_errors",		"rx_too_long_errors",
+	"rx_carrier_extension_errors",	"rx_symbol_errors",
+	"rx_llc_mac_size_errors",	"rx_carrier_errors",	
+	"rx_jabber_errors",		"rx_missed_errors",
+	"tx_abort_collision_errors",	"tx_carrier_errors",
+	"tx_buffer_underrun_errors",	"tx_heartbeat_errors",
+	"tx_window_errors",
+};
+
+static int getStatsCount(struct net_device *dev)
+{
+	return ARRAY_SIZE(StringsStats);
+}
+
+static void getStrings(struct net_device *dev, u32 stringset, u8 *data)
+{
+	switch(stringset) {
+	case ETH_SS_STATS:
+		memcpy(data, *StringsStats, sizeof(StringsStats));
+		break;
+	}
+}
+
+static void getEthtoolStats(struct net_device *dev,
+			    struct ethtool_stats *stats, u64 *data)
+{
+	const DEV_NET	*pNet = netdev_priv(dev);
+	const SK_AC *pAC = pNet->pAC;
+	const SK_PNMI_STRUCT_DATA *pPnmiStruct = &pAC->PnmiStruct;
+
+	*data++ = pPnmiStruct->Stat[0].StatRxOkCts;
+	*data++ = pPnmiStruct->Stat[0].StatTxOkCts;
+	*data++ = pPnmiStruct->Stat[0].StatRxOctetsOkCts;
+	*data++ = pPnmiStruct->Stat[0].StatTxOctetsOkCts;
+	*data++ = pPnmiStruct->InErrorsCts;
+	*data++ = pPnmiStruct->Stat[0].StatTxSingleCollisionCts;
+	*data++ = pPnmiStruct->RxNoBufCts;
+	*data++ = pPnmiStruct->TxNoBufCts;
+	*data++ = pPnmiStruct->Stat[0].StatRxMulticastOkCts;
+	*data++ = pPnmiStruct->Stat[0].StatTxSingleCollisionCts;
+	*data++ = pPnmiStruct->Stat[0].StatRxRuntCts;
+	*data++ = pPnmiStruct->Stat[0].StatRxFifoOverflowCts;
+	*data++ = pPnmiStruct->Stat[0].StatRxFcsCts;
+	*data++ = pPnmiStruct->Stat[0].StatRxFramingCts;
+	*data++ = pPnmiStruct->Stat[0].StatRxShortsCts;
+	*data++ = pPnmiStruct->Stat[0].StatRxTooLongCts;
+	*data++ = pPnmiStruct->Stat[0].StatRxCextCts;
+	*data++ = pPnmiStruct->Stat[0].StatRxSymbolCts;
+	*data++ = pPnmiStruct->Stat[0].StatRxIRLengthCts;
+	*data++ = pPnmiStruct->Stat[0].StatRxCarrierCts;
+	*data++ = pPnmiStruct->Stat[0].StatRxJabberCts;
+	*data++ = pPnmiStruct->Stat[0].StatRxMissedCts;
+	*data++ = pAC->stats.tx_aborted_errors;
+	*data++ = pPnmiStruct->Stat[0].StatTxCarrierCts;
+	*data++ = pPnmiStruct->Stat[0].StatTxFifoUnderrunCts;
+	*data++ = pPnmiStruct->Stat[0].StatTxCarrierCts;
+	*data++ = pAC->stats.tx_window_errors;
+}
+
+
+/*****************************************************************************
+ *
+ * 	toggleLeds - Changes the LED state of an adapter
+ *
+ * Description:
+ *	This function changes the current state of all LEDs of an adapter so
+ *	that it can be located by a user. 
+ *
+ * Returns:	N/A
+ *
+ */
+static void toggleLeds(DEV_NET *pNet, int on)
+{
+	SK_AC *pAC = pNet->pAC;
+	int port = pNet->PortNr;
+	void __iomem *io = pAC->IoBase;
+
+	if (pAC->GIni.GIGenesis) {
+		SK_OUT8(io, MR_ADDR(port,LNK_LED_REG), 
+			on ? SK_LNK_ON : SK_LNK_OFF);
+		SkGeYellowLED(pAC, io, 
+			      on ? (LED_ON >> 1) : (LED_OFF >> 1));
+		SkGeXmitLED(pAC, io, MR_ADDR(port,RX_LED_INI),
+			    on ? SK_LED_TST : SK_LED_DIS);
+
+		if (pAC->GIni.GP[port].PhyType == SK_PHY_BCOM)
+			SkXmPhyWrite(pAC, io, port, PHY_BCOM_P_EXT_CTRL, 
+				     on ? PHY_B_PEC_LED_ON : PHY_B_PEC_LED_OFF);
+		else if (pAC->GIni.GP[port].PhyType == SK_PHY_LONE)
+			SkXmPhyWrite(pAC, io, port, PHY_LONE_LED_CFG,
+				     on ? 0x0800 : PHY_L_LC_LEDT);
+		else
+			SkGeXmitLED(pAC, io, MR_ADDR(port,TX_LED_INI),
+				    on ? SK_LED_TST : SK_LED_DIS);
+	} else {
+		const u16 YukLedOn = (PHY_M_LED_MO_DUP(MO_LED_ON)  |
+				      PHY_M_LED_MO_10(MO_LED_ON)   |
+				      PHY_M_LED_MO_100(MO_LED_ON)  |
+				      PHY_M_LED_MO_1000(MO_LED_ON) | 
+				      PHY_M_LED_MO_RX(MO_LED_ON));
+		const u16  YukLedOff = (PHY_M_LED_MO_DUP(MO_LED_OFF)  |
+					PHY_M_LED_MO_10(MO_LED_OFF)   |
+					PHY_M_LED_MO_100(MO_LED_OFF)  |
+					PHY_M_LED_MO_1000(MO_LED_OFF) | 
+					PHY_M_LED_MO_RX(MO_LED_OFF));
+	
+
+		SkGmPhyWrite(pAC,io,port,PHY_MARV_LED_CTRL,0);
+		SkGmPhyWrite(pAC,io,port,PHY_MARV_LED_OVER, 
+			     on ? YukLedOn : YukLedOff);
+	}
+}
+
+/*****************************************************************************
+ *
+ * 	skGeBlinkTimer - Changes the LED state of an adapter
+ *
+ * Description:
+ *	This function changes the current state of all LEDs of an adapter so
+ *	that it can be located by a user. If the requested time interval for
+ *	this test has elapsed, this function cleans up everything that was 
+ *	temporarily setup during the locate NIC test. This involves of course
+ *	also closing or opening any adapter so that the initial board state 
+ *	is recovered.
+ *
+ * Returns:	N/A
+ *
+ */
+void SkGeBlinkTimer(unsigned long data)
+{
+	struct net_device *dev = (struct net_device *) data;
+	DEV_NET *pNet = netdev_priv(dev);
+	SK_AC *pAC = pNet->pAC;
+
+	toggleLeds(pNet, pAC->LedsOn);
+
+	pAC->LedsOn = !pAC->LedsOn;
+	mod_timer(&pAC->BlinkTimer, jiffies + HZ/4);
+}
+
+/*****************************************************************************
+ *
+ * 	locateDevice - start the locate NIC feature of the elected adapter 
+ *
+ * Description:
+ *	This function is used if the user want to locate a particular NIC.
+ *	All LEDs are regularly switched on and off, so the NIC can easily
+ *	be identified.
+ *
+ * Returns:	
+ *	==0:	everything fine, no error, locateNIC test was started
+ *	!=0:	one locateNIC test runs already
+ *
+ */
+static int locateDevice(struct net_device *dev, u32 data)
+{
+	DEV_NET *pNet = netdev_priv(dev);
+	SK_AC *pAC = pNet->pAC;
+
+	if(!data || data > (u32)(MAX_SCHEDULE_TIMEOUT / HZ))
+		data = (u32)(MAX_SCHEDULE_TIMEOUT / HZ);
+
+	/* start blinking */
+	pAC->LedsOn = 0;
+	mod_timer(&pAC->BlinkTimer, jiffies);
+	msleep_interruptible(data * 1000);
+	del_timer_sync(&pAC->BlinkTimer);
+	toggleLeds(pNet, 0);
+
+	return 0;
+}
+
+/*****************************************************************************
+ *
+ * 	getPauseParams - retrieves the pause parameters
+ *
+ * Description:
+ *	All current pause parameters of a selected adapter are placed 
+ *	in the passed ethtool_pauseparam structure and are returned.
+ *
+ * Returns:	N/A
+ *
+ */
+static void getPauseParams(struct net_device *dev, struct ethtool_pauseparam *epause) 
+{
+	DEV_NET	*pNet = netdev_priv(dev);
+	SK_AC *pAC = pNet->pAC;
+	SK_GEPORT *pPort = &pAC->GIni.GP[pNet->PortNr];
+
+	epause->rx_pause = (pPort->PFlowCtrlMode == SK_FLOW_MODE_SYMMETRIC) ||
+		  (pPort->PFlowCtrlMode == SK_FLOW_MODE_SYM_OR_REM);
+
+	epause->tx_pause = epause->rx_pause || (pPort->PFlowCtrlMode == SK_FLOW_MODE_LOC_SEND);
+	epause->autoneg = epause->rx_pause || epause->tx_pause;
+}
+
+/*****************************************************************************
+ *
+ *	setPauseParams - configures the pause parameters of an adapter
+ *
+ * Description:
+ *	This function sets the Rx or Tx pause parameters 
+ *
+ * Returns:
+ *	==0:	everything fine, no error
+ *	!=0:	the return value is the error code of the failure 
+ */
+static int setPauseParams(struct net_device *dev , struct ethtool_pauseparam *epause)
+{
+	DEV_NET	*pNet = netdev_priv(dev);
+	SK_AC *pAC = pNet->pAC;
+	SK_GEPORT *pPort = &pAC->GIni.GP[pNet->PortNr];
+	u32	instance = pnmiInstance(pNet);
+	struct ethtool_pauseparam old;
+	u8	oldspeed = pPort->PLinkSpeedUsed;
+	char	buf[4];
+	int	len = 1;
+	int ret;
+
+	/*
+	** we have to determine the current settings to see if 
+	** the operator requested any modification of the flow 
+	** control parameters...
+	*/
+	getPauseParams(dev, &old);
+
+	/*
+	** perform modifications regarding the changes 
+	** requested by the operator
+	*/
+	if (epause->autoneg != old.autoneg) 
+		*buf = epause->autoneg ? SK_FLOW_MODE_NONE : SK_FLOW_MODE_SYMMETRIC;
+	else {
+		if (epause->rx_pause && epause->tx_pause) 
+			*buf = SK_FLOW_MODE_SYMMETRIC;
+		else if (epause->rx_pause && !epause->tx_pause)
+			*buf =  SK_FLOW_MODE_SYM_OR_REM;
+		else if (!epause->rx_pause && epause->tx_pause)
+			*buf =  SK_FLOW_MODE_LOC_SEND;
+		else
+			*buf = SK_FLOW_MODE_NONE;
+	}
+
+	ret = SkPnmiSetVar(pAC, pAC->IoBase, OID_SKGE_FLOWCTRL_MODE,
+			 &buf, &len, instance, pNet->NetNr);
+
+	if (ret != SK_PNMI_ERR_OK) {
+		SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_CTRL,
+			   ("ethtool (sk98lin): error changing rx/tx pause (%i)\n", ret));
+		goto err;
+	}
+
+	/*
+	** It may be that autoneg has been disabled! Therefore
+	** set the speed to the previously used value...
+	*/
+	if (!epause->autoneg) {
+		len = 1;
+		ret = SkPnmiSetVar(pAC, pAC->IoBase, OID_SKGE_SPEED_MODE, 
+				   &oldspeed, &len, instance, pNet->NetNr);
+		if (ret != SK_PNMI_ERR_OK) 
+			SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_CTRL,
+				   ("ethtool (sk98lin): error setting speed (%i)\n", ret));
+	}
+ err:
+        return ret ? -EIO : 0;
+}
+
+/* Only Yukon supports checksum offload. */
+static int setScatterGather(struct net_device *dev, u32 data)
+{
+	DEV_NET *pNet = netdev_priv(dev);
+	SK_AC *pAC = pNet->pAC;
+
+	if (pAC->GIni.GIChipId == CHIP_ID_GENESIS)
+		return -EOPNOTSUPP;
+	return ethtool_op_set_sg(dev, data);
+}
+
+static int setTxCsum(struct net_device *dev, u32 data)
+{
+	DEV_NET *pNet = netdev_priv(dev);
+	SK_AC *pAC = pNet->pAC;
+
+	if (pAC->GIni.GIChipId == CHIP_ID_GENESIS)
+		return -EOPNOTSUPP;
+
+	return ethtool_op_set_tx_csum(dev, data);
+}
+
+static u32 getRxCsum(struct net_device *dev)
+{
+	DEV_NET *pNet = netdev_priv(dev);
+	SK_AC *pAC = pNet->pAC;
+
+	return pAC->RxPort[pNet->PortNr].RxCsum;
+}
+
+static int setRxCsum(struct net_device *dev, u32 data)
+{
+	DEV_NET *pNet = netdev_priv(dev);
+	SK_AC *pAC = pNet->pAC;
+
+	if (pAC->GIni.GIChipId == CHIP_ID_GENESIS)
+		return -EOPNOTSUPP;
+
+	pAC->RxPort[pNet->PortNr].RxCsum = data != 0;
+	return 0;
+}
+
+static int getRegsLen(struct net_device *dev)
+{
+	return 0x4000;
+}
+
+/*
+ * Returns copy of whole control register region
+ * Note: skip RAM address register because accessing it will
+ * 	 cause bus hangs!
+ */
+static void getRegs(struct net_device *dev, struct ethtool_regs *regs,
+			  void *p)
+{
+	DEV_NET *pNet = netdev_priv(dev);
+	const void __iomem *io = pNet->pAC->IoBase;
+
+	regs->version = 1;
+	memset(p, 0, regs->len);
+	memcpy_fromio(p, io, B3_RAM_ADDR);
+
+	memcpy_fromio(p + B3_RI_WTO_R1, io + B3_RI_WTO_R1,
+		      regs->len - B3_RI_WTO_R1);
+}
+
+const struct ethtool_ops SkGeEthtoolOps = {
+	.get_settings		= getSettings,
+	.set_settings		= setSettings,
+	.get_drvinfo		= getDriverInfo,
+	.get_strings		= getStrings,
+	.get_stats_count	= getStatsCount,
+	.get_ethtool_stats	= getEthtoolStats,
+	.phys_id		= locateDevice,
+	.get_pauseparam		= getPauseParams,
+	.set_pauseparam		= setPauseParams,
+	.get_link		= ethtool_op_get_link,
+	.get_sg			= ethtool_op_get_sg,
+	.set_sg			= setScatterGather,
+	.get_tx_csum		= ethtool_op_get_tx_csum,
+	.set_tx_csum		= setTxCsum,
+	.get_rx_csum		= getRxCsum,
+	.set_rx_csum		= setRxCsum,
+	.get_regs		= getRegs,
+	.get_regs_len		= getRegsLen,
+};
diff --git a/drivers/net/sk98lin/skge.c b/drivers/net/sk98lin/skge.c
new file mode 100644
index 0000000..7dc9c9e
--- /dev/null
+++ b/drivers/net/sk98lin/skge.c
@@ -0,0 +1,5219 @@
+/******************************************************************************
+ *
+ * Name:	skge.c
+ * Project:	GEnesis, PCI Gigabit Ethernet Adapter
+ * Version:	$Revision: 1.45 $
+ * Date:       	$Date: 2004/02/12 14:41:02 $
+ * Purpose:	The main driver source module
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *	(C)Copyright 1998-2002 SysKonnect GmbH.
+ *	(C)Copyright 2002-2003 Marvell.
+ *
+ *	Driver for Marvell Yukon chipset and SysKonnect Gigabit Ethernet 
+ *      Server Adapters.
+ *
+ *	Created 10-Feb-1999, based on Linux' acenic.c, 3c59x.c and
+ *	SysKonnects GEnesis Solaris driver
+ *	Author: Christoph Goos (cgoos@syskonnect.de)
+ *	        Mirko Lindner (mlindner@syskonnect.de)
+ *
+ *	Address all question to: linux@syskonnect.de
+ *
+ *	The technical manual for the adapters is available from SysKonnect's
+ *	web pages: www.syskonnect.com
+ *	Goto "Support" and search Knowledge Base for "manual".
+ *	
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * Possible compiler options (#define xxx / -Dxxx):
+ *
+ *	debugging can be enable by changing SK_DEBUG_CHKMOD and
+ *	SK_DEBUG_CHKCAT in makefile (described there).
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * Description:
+ *
+ *	This is the main module of the Linux GE driver.
+ *	
+ *	All source files except skge.c, skdrv1st.h, skdrv2nd.h and sktypes.h
+ *	are part of SysKonnect's COMMON MODULES for the SK-98xx adapters.
+ *	Those are used for drivers on multiple OS', so some thing may seem
+ *	unnecessary complicated on Linux. Please do not try to 'clean up'
+ *	them without VERY good reasons, because this will make it more
+ *	difficult to keep the Linux driver in synchronisation with the
+ *	other versions.
+ *
+ * Include file hierarchy:
+ *
+ *	<linux/module.h>
+ *
+ *	"h/skdrv1st.h"
+ *		<linux/types.h>
+ *		<linux/kernel.h>
+ *		<linux/string.h>
+ *		<linux/errno.h>
+ *		<linux/ioport.h>
+ *		<linux/slab.h>
+ *		<linux/interrupt.h>
+ *		<linux/pci.h>
+ *		<linux/bitops.h>
+ *		<asm/byteorder.h>
+ *		<asm/io.h>
+ *		<linux/netdevice.h>
+ *		<linux/etherdevice.h>
+ *		<linux/skbuff.h>
+ *	    those three depending on kernel version used:
+ *		<linux/bios32.h>
+ *		<linux/init.h>
+ *		<asm/uaccess.h>
+ *		<net/checksum.h>
+ *
+ *		"h/skerror.h"
+ *		"h/skdebug.h"
+ *		"h/sktypes.h"
+ *		"h/lm80.h"
+ *		"h/xmac_ii.h"
+ *
+ *      "h/skdrv2nd.h"
+ *		"h/skqueue.h"
+ *		"h/skgehwt.h"
+ *		"h/sktimer.h"
+ *		"h/ski2c.h"
+ *		"h/skgepnmi.h"
+ *		"h/skvpd.h"
+ *		"h/skgehw.h"
+ *		"h/skgeinit.h"
+ *		"h/skaddr.h"
+ *		"h/skgesirq.h"
+ *		"h/skrlmt.h"
+ *
+ ******************************************************************************/
+
+#include	"h/skversion.h"
+
+#include	<linux/in.h>
+#include	<linux/module.h>
+#include	<linux/moduleparam.h>
+#include	<linux/init.h>
+#include	<linux/dma-mapping.h>
+#include	<linux/ip.h>
+#include	<linux/mii.h>
+#include	<linux/mm.h>
+
+#include	"h/skdrv1st.h"
+#include	"h/skdrv2nd.h"
+
+/*******************************************************************************
+ *
+ * Defines
+ *
+ ******************************************************************************/
+
+/* for debuging on x86 only */
+/* #define BREAKPOINT() asm(" int $3"); */
+
+/* use the transmit hw checksum driver functionality */
+#define USE_SK_TX_CHECKSUM
+
+/* use the receive hw checksum driver functionality */
+#define USE_SK_RX_CHECKSUM
+
+/* use the scatter-gather functionality with sendfile() */
+#define SK_ZEROCOPY
+
+/* use of a transmit complete interrupt */
+#define USE_TX_COMPLETE
+
+/*
+ * threshold for copying small receive frames
+ * set to 0 to avoid copying, set to 9001 to copy all frames
+ */
+#define SK_COPY_THRESHOLD	50
+
+/* number of adapters that can be configured via command line params */
+#define SK_MAX_CARD_PARAM	16
+
+
+
+/*
+ * use those defines for a compile-in version of the driver instead
+ * of command line parameters
+ */
+// #define LINK_SPEED_A	{"Auto", }
+// #define LINK_SPEED_B	{"Auto", }
+// #define AUTO_NEG_A	{"Sense", }
+// #define AUTO_NEG_B	{"Sense", }
+// #define DUP_CAP_A	{"Both", }
+// #define DUP_CAP_B	{"Both", }
+// #define FLOW_CTRL_A	{"SymOrRem", }
+// #define FLOW_CTRL_B	{"SymOrRem", }
+// #define ROLE_A	{"Auto", }
+// #define ROLE_B	{"Auto", }
+// #define PREF_PORT	{"A", }
+// #define CON_TYPE 	{"Auto", }
+// #define RLMT_MODE	{"CheckLinkState", }
+
+#define DEV_KFREE_SKB(skb) dev_kfree_skb(skb)
+#define DEV_KFREE_SKB_IRQ(skb) dev_kfree_skb_irq(skb)
+#define DEV_KFREE_SKB_ANY(skb) dev_kfree_skb_any(skb)
+
+
+/* Set blink mode*/
+#define OEM_CONFIG_VALUE (	SK_ACT_LED_BLINK | \
+				SK_DUP_LED_NORMAL | \
+				SK_LED_LINK100_ON)
+
+
+/* Isr return value */
+#define SkIsrRetVar	irqreturn_t
+#define SkIsrRetNone	IRQ_NONE
+#define SkIsrRetHandled	IRQ_HANDLED
+
+
+/*******************************************************************************
+ *
+ * Local Function Prototypes
+ *
+ ******************************************************************************/
+
+static void	FreeResources(struct SK_NET_DEVICE *dev);
+static int	SkGeBoardInit(struct SK_NET_DEVICE *dev, SK_AC *pAC);
+static SK_BOOL	BoardAllocMem(SK_AC *pAC);
+static void	BoardFreeMem(SK_AC *pAC);
+static void	BoardInitMem(SK_AC *pAC);
+static void	SetupRing(SK_AC*, void*, uintptr_t, RXD**, RXD**, RXD**, int*, SK_BOOL);
+static SkIsrRetVar	SkGeIsr(int irq, void *dev_id);
+static SkIsrRetVar	SkGeIsrOnePort(int irq, void *dev_id);
+static int	SkGeOpen(struct SK_NET_DEVICE *dev);
+static int	SkGeClose(struct SK_NET_DEVICE *dev);
+static int	SkGeXmit(struct sk_buff *skb, struct SK_NET_DEVICE *dev);
+static int	SkGeSetMacAddr(struct SK_NET_DEVICE *dev, void *p);
+static void	SkGeSetRxMode(struct SK_NET_DEVICE *dev);
+static struct	net_device_stats *SkGeStats(struct SK_NET_DEVICE *dev);
+static int	SkGeIoctl(struct SK_NET_DEVICE *dev, struct ifreq *rq, int cmd);
+static void	GetConfiguration(SK_AC*);
+static int	XmitFrame(SK_AC*, TX_PORT*, struct sk_buff*);
+static void	FreeTxDescriptors(SK_AC*pAC, TX_PORT*);
+static void	FillRxRing(SK_AC*, RX_PORT*);
+static SK_BOOL	FillRxDescriptor(SK_AC*, RX_PORT*);
+static void	ReceiveIrq(SK_AC*, RX_PORT*, SK_BOOL);
+static void	ClearAndStartRx(SK_AC*, int);
+static void	ClearTxIrq(SK_AC*, int, int);
+static void	ClearRxRing(SK_AC*, RX_PORT*);
+static void	ClearTxRing(SK_AC*, TX_PORT*);
+static int	SkGeChangeMtu(struct SK_NET_DEVICE *dev, int new_mtu);
+static void	PortReInitBmu(SK_AC*, int);
+static int	SkGeIocMib(DEV_NET*, unsigned int, int);
+static int	SkGeInitPCI(SK_AC *pAC);
+static void	StartDrvCleanupTimer(SK_AC *pAC);
+static void	StopDrvCleanupTimer(SK_AC *pAC);
+static int	XmitFrameSG(SK_AC*, TX_PORT*, struct sk_buff*);
+
+#ifdef SK_DIAG_SUPPORT
+static SK_U32   ParseDeviceNbrFromSlotName(const char *SlotName);
+static int      SkDrvInitAdapter(SK_AC *pAC, int devNbr);
+static int      SkDrvDeInitAdapter(SK_AC *pAC, int devNbr);
+#endif
+
+/*******************************************************************************
+ *
+ * Extern Function Prototypes
+ *
+ ******************************************************************************/
+extern void SkDimEnableModerationIfNeeded(SK_AC *pAC);	
+extern void SkDimDisplayModerationSettings(SK_AC *pAC);
+extern void SkDimStartModerationTimer(SK_AC *pAC);
+extern void SkDimModerate(SK_AC *pAC);
+extern void SkGeBlinkTimer(unsigned long data);
+
+#ifdef DEBUG
+static void	DumpMsg(struct sk_buff*, char*);
+static void	DumpData(char*, int);
+static void	DumpLong(char*, int);
+#endif
+
+/* global variables *********************************************************/
+static SK_BOOL DoPrintInterfaceChange = SK_TRUE;
+extern const struct ethtool_ops SkGeEthtoolOps;
+
+/* local variables **********************************************************/
+static uintptr_t TxQueueAddr[SK_MAX_MACS][2] = {{0x680, 0x600},{0x780, 0x700}};
+static uintptr_t RxQueueAddr[SK_MAX_MACS] = {0x400, 0x480};
+
+/*****************************************************************************
+ *
+ *	SkPciWriteCfgDWord - write a 32 bit value to pci config space
+ *
+ * Description:
+ *	This routine writes a 32 bit value to the pci configuration
+ *	space.
+ *
+ * Returns:
+ *	0 - indicate everything worked ok.
+ *	!= 0 - error indication
+ */
+static inline int SkPciWriteCfgDWord(
+SK_AC *pAC,	/* Adapter Control structure pointer */
+int PciAddr,		/* PCI register address */
+SK_U32 Val)		/* pointer to store the read value */
+{
+	pci_write_config_dword(pAC->PciDev, PciAddr, Val);
+	return(0);
+} /* SkPciWriteCfgDWord */
+
+/*****************************************************************************
+ *
+ * 	SkGeInitPCI - Init the PCI resources
+ *
+ * Description:
+ *	This function initialize the PCI resources and IO
+ *
+ * Returns:
+ *	0 - indicate everything worked ok.
+ *	!= 0 - error indication
+ */
+static __devinit int SkGeInitPCI(SK_AC *pAC)
+{
+	struct SK_NET_DEVICE *dev = pAC->dev[0];
+	struct pci_dev *pdev = pAC->PciDev;
+	int retval;
+
+	dev->mem_start = pci_resource_start (pdev, 0);
+	pci_set_master(pdev);
+
+	retval = pci_request_regions(pdev, "sk98lin");
+	if (retval)
+		goto out;
+
+#ifdef SK_BIG_ENDIAN
+	/*
+	 * On big endian machines, we use the adapter's aibility of
+	 * reading the descriptors as big endian.
+	 */
+	{
+		SK_U32		our2;
+		SkPciReadCfgDWord(pAC, PCI_OUR_REG_2, &our2);
+		our2 |= PCI_REV_DESC;
+		SkPciWriteCfgDWord(pAC, PCI_OUR_REG_2, our2);
+	}
+#endif
+
+	/*
+	 * Remap the regs into kernel space.
+	 */
+	pAC->IoBase = ioremap_nocache(dev->mem_start, 0x4000);
+	if (!pAC->IoBase) {
+		retval = -EIO;
+		goto out_release;
+	}
+
+	return 0;
+
+ out_release:
+	pci_release_regions(pdev);
+ out:
+	return retval;
+}
+
+
+/*****************************************************************************
+ *
+ * 	FreeResources - release resources allocated for adapter
+ *
+ * Description:
+ *	This function releases the IRQ, unmaps the IO and
+ *	frees the desriptor ring.
+ *
+ * Returns: N/A
+ *	
+ */
+static void FreeResources(struct SK_NET_DEVICE *dev)
+{
+SK_U32 AllocFlag;
+DEV_NET		*pNet;
+SK_AC		*pAC;
+
+	pNet = netdev_priv(dev);
+	pAC = pNet->pAC;
+	AllocFlag = pAC->AllocFlag;
+	if (pAC->PciDev) {
+		pci_release_regions(pAC->PciDev);
+	}
+	if (AllocFlag & SK_ALLOC_IRQ) {
+		free_irq(dev->irq, dev);
+	}
+	if (pAC->IoBase) {
+		iounmap(pAC->IoBase);
+	}
+	if (pAC->pDescrMem) {
+		BoardFreeMem(pAC);
+	}
+	
+} /* FreeResources */
+
+MODULE_AUTHOR("Mirko Lindner <mlindner@syskonnect.de>");
+MODULE_DESCRIPTION("SysKonnect SK-NET Gigabit Ethernet SK-98xx driver");
+MODULE_LICENSE("GPL");
+
+#ifdef LINK_SPEED_A
+static char *Speed_A[SK_MAX_CARD_PARAM] = LINK_SPEED;
+#else
+static char *Speed_A[SK_MAX_CARD_PARAM] = {"", };
+#endif
+
+#ifdef LINK_SPEED_B
+static char *Speed_B[SK_MAX_CARD_PARAM] = LINK_SPEED;
+#else
+static char *Speed_B[SK_MAX_CARD_PARAM] = {"", };
+#endif
+
+#ifdef AUTO_NEG_A
+static char *AutoNeg_A[SK_MAX_CARD_PARAM] = AUTO_NEG_A;
+#else
+static char *AutoNeg_A[SK_MAX_CARD_PARAM] = {"", };
+#endif
+
+#ifdef DUP_CAP_A
+static char *DupCap_A[SK_MAX_CARD_PARAM] = DUP_CAP_A;
+#else
+static char *DupCap_A[SK_MAX_CARD_PARAM] = {"", };
+#endif
+
+#ifdef FLOW_CTRL_A
+static char *FlowCtrl_A[SK_MAX_CARD_PARAM] = FLOW_CTRL_A;
+#else
+static char *FlowCtrl_A[SK_MAX_CARD_PARAM] = {"", };
+#endif
+
+#ifdef ROLE_A
+static char *Role_A[SK_MAX_CARD_PARAM] = ROLE_A;
+#else
+static char *Role_A[SK_MAX_CARD_PARAM] = {"", };
+#endif
+
+#ifdef AUTO_NEG_B
+static char *AutoNeg_B[SK_MAX_CARD_PARAM] = AUTO_NEG_B;
+#else
+static char *AutoNeg_B[SK_MAX_CARD_PARAM] = {"", };
+#endif
+
+#ifdef DUP_CAP_B
+static char *DupCap_B[SK_MAX_CARD_PARAM] = DUP_CAP_B;
+#else
+static char *DupCap_B[SK_MAX_CARD_PARAM] = {"", };
+#endif
+
+#ifdef FLOW_CTRL_B
+static char *FlowCtrl_B[SK_MAX_CARD_PARAM] = FLOW_CTRL_B;
+#else
+static char *FlowCtrl_B[SK_MAX_CARD_PARAM] = {"", };
+#endif
+
+#ifdef ROLE_B
+static char *Role_B[SK_MAX_CARD_PARAM] = ROLE_B;
+#else
+static char *Role_B[SK_MAX_CARD_PARAM] = {"", };
+#endif
+
+#ifdef CON_TYPE
+static char *ConType[SK_MAX_CARD_PARAM] = CON_TYPE;
+#else
+static char *ConType[SK_MAX_CARD_PARAM] = {"", };
+#endif
+
+#ifdef PREF_PORT
+static char *PrefPort[SK_MAX_CARD_PARAM] = PREF_PORT;
+#else
+static char *PrefPort[SK_MAX_CARD_PARAM] = {"", };
+#endif
+
+#ifdef RLMT_MODE
+static char *RlmtMode[SK_MAX_CARD_PARAM] = RLMT_MODE;
+#else
+static char *RlmtMode[SK_MAX_CARD_PARAM] = {"", };
+#endif
+
+static int   IntsPerSec[SK_MAX_CARD_PARAM];
+static char *Moderation[SK_MAX_CARD_PARAM];
+static char *ModerationMask[SK_MAX_CARD_PARAM];
+static char *AutoSizing[SK_MAX_CARD_PARAM];
+static char *Stats[SK_MAX_CARD_PARAM];
+
+module_param_array(Speed_A, charp, NULL, 0);
+module_param_array(Speed_B, charp, NULL, 0);
+module_param_array(AutoNeg_A, charp, NULL, 0);
+module_param_array(AutoNeg_B, charp, NULL, 0);
+module_param_array(DupCap_A, charp, NULL, 0);
+module_param_array(DupCap_B, charp, NULL, 0);
+module_param_array(FlowCtrl_A, charp, NULL, 0);
+module_param_array(FlowCtrl_B, charp, NULL, 0);
+module_param_array(Role_A, charp, NULL, 0);
+module_param_array(Role_B, charp, NULL, 0);
+module_param_array(ConType, charp, NULL, 0);
+module_param_array(PrefPort, charp, NULL, 0);
+module_param_array(RlmtMode, charp, NULL, 0);
+/* used for interrupt moderation */
+module_param_array(IntsPerSec, int, NULL, 0);
+module_param_array(Moderation, charp, NULL, 0);
+module_param_array(Stats, charp, NULL, 0);
+module_param_array(ModerationMask, charp, NULL, 0);
+module_param_array(AutoSizing, charp, NULL, 0);
+
+/*****************************************************************************
+ *
+ * 	SkGeBoardInit - do level 0 and 1 initialization
+ *
+ * Description:
+ *	This function prepares the board hardware for running. The desriptor
+ *	ring is set up, the IRQ is allocated and the configuration settings
+ *	are examined.
+ *
+ * Returns:
+ *	0, if everything is ok
+ *	!=0, on error
+ */
+static int __devinit SkGeBoardInit(struct SK_NET_DEVICE *dev, SK_AC *pAC)
+{
+short	i;
+unsigned long Flags;
+char	*DescrString = "sk98lin: Driver for Linux"; /* this is given to PNMI */
+char	*VerStr	= VER_STRING;
+int	Ret;			/* return code of request_irq */
+SK_BOOL	DualNet;
+
+	SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY,
+		("IoBase: %08lX\n", (unsigned long)pAC->IoBase));
+	for (i=0; i<SK_MAX_MACS; i++) {
+		pAC->TxPort[i][0].HwAddr = pAC->IoBase + TxQueueAddr[i][0];
+		pAC->TxPort[i][0].PortIndex = i;
+		pAC->RxPort[i].HwAddr = pAC->IoBase + RxQueueAddr[i];
+		pAC->RxPort[i].PortIndex = i;
+	}
+
+	/* Initialize the mutexes */
+	for (i=0; i<SK_MAX_MACS; i++) {
+		spin_lock_init(&pAC->TxPort[i][0].TxDesRingLock);
+		spin_lock_init(&pAC->RxPort[i].RxDesRingLock);
+	}
+	spin_lock_init(&pAC->SlowPathLock);
+
+	/* setup phy_id blink timer */
+	pAC->BlinkTimer.function = SkGeBlinkTimer;
+	pAC->BlinkTimer.data = (unsigned long) dev;
+	init_timer(&pAC->BlinkTimer);
+
+	/* level 0 init common modules here */
+	
+	spin_lock_irqsave(&pAC->SlowPathLock, Flags);
+	/* Does a RESET on board ...*/
+	if (SkGeInit(pAC, pAC->IoBase, SK_INIT_DATA) != 0) {
+		printk("HWInit (0) failed.\n");
+		spin_unlock_irqrestore(&pAC->SlowPathLock, Flags);
+		return -EIO;
+	}
+	SkI2cInit(  pAC, pAC->IoBase, SK_INIT_DATA);
+	SkEventInit(pAC, pAC->IoBase, SK_INIT_DATA);
+	SkPnmiInit( pAC, pAC->IoBase, SK_INIT_DATA);
+	SkAddrInit( pAC, pAC->IoBase, SK_INIT_DATA);
+	SkRlmtInit( pAC, pAC->IoBase, SK_INIT_DATA);
+	SkTimerInit(pAC, pAC->IoBase, SK_INIT_DATA);
+
+	pAC->BoardLevel = SK_INIT_DATA;
+	pAC->RxBufSize  = ETH_BUF_SIZE;
+
+	SK_PNMI_SET_DRIVER_DESCR(pAC, DescrString);
+	SK_PNMI_SET_DRIVER_VER(pAC, VerStr);
+
+	spin_unlock_irqrestore(&pAC->SlowPathLock, Flags);
+
+	/* level 1 init common modules here (HW init) */
+	spin_lock_irqsave(&pAC->SlowPathLock, Flags);
+	if (SkGeInit(pAC, pAC->IoBase, SK_INIT_IO) != 0) {
+		printk("sk98lin: HWInit (1) failed.\n");
+		spin_unlock_irqrestore(&pAC->SlowPathLock, Flags);
+		return -EIO;
+	}
+	SkI2cInit(  pAC, pAC->IoBase, SK_INIT_IO);
+	SkEventInit(pAC, pAC->IoBase, SK_INIT_IO);
+	SkPnmiInit( pAC, pAC->IoBase, SK_INIT_IO);
+	SkAddrInit( pAC, pAC->IoBase, SK_INIT_IO);
+	SkRlmtInit( pAC, pAC->IoBase, SK_INIT_IO);
+	SkTimerInit(pAC, pAC->IoBase, SK_INIT_IO);
+
+	/* Set chipset type support */
+	pAC->ChipsetType = 0;
+	if ((pAC->GIni.GIChipId == CHIP_ID_YUKON) ||
+		(pAC->GIni.GIChipId == CHIP_ID_YUKON_LITE)) {
+		pAC->ChipsetType = 1;
+	}
+
+	GetConfiguration(pAC);
+	if (pAC->RlmtNets == 2) {
+		pAC->GIni.GIPortUsage = SK_MUL_LINK;
+	}
+
+	pAC->BoardLevel = SK_INIT_IO;
+	spin_unlock_irqrestore(&pAC->SlowPathLock, Flags);
+
+	if (pAC->GIni.GIMacsFound == 2) {
+		 Ret = request_irq(dev->irq, SkGeIsr, IRQF_SHARED, "sk98lin", dev);
+	} else if (pAC->GIni.GIMacsFound == 1) {
+		Ret = request_irq(dev->irq, SkGeIsrOnePort, IRQF_SHARED,
+			"sk98lin", dev);
+	} else {
+		printk(KERN_WARNING "sk98lin: Illegal number of ports: %d\n",
+		       pAC->GIni.GIMacsFound);
+		return -EIO;
+	}
+
+	if (Ret) {
+		printk(KERN_WARNING "sk98lin: Requested IRQ %d is busy.\n",
+		       dev->irq);
+		return Ret;
+	}
+	pAC->AllocFlag |= SK_ALLOC_IRQ;
+
+	/* Alloc memory for this board (Mem for RxD/TxD) : */
+	if(!BoardAllocMem(pAC)) {
+		printk("No memory for descriptor rings.\n");
+		return -ENOMEM;
+	}
+
+	BoardInitMem(pAC);
+	/* tschilling: New common function with minimum size check. */
+	DualNet = SK_FALSE;
+	if (pAC->RlmtNets == 2) {
+		DualNet = SK_TRUE;
+	}
+	
+	if (SkGeInitAssignRamToQueues(
+		pAC,
+		pAC->ActivePort,
+		DualNet)) {
+		BoardFreeMem(pAC);
+		printk("sk98lin: SkGeInitAssignRamToQueues failed.\n");
+		return -EIO;
+	}
+
+	return (0);
+} /* SkGeBoardInit */
+
+
+/*****************************************************************************
+ *
+ * 	BoardAllocMem - allocate the memory for the descriptor rings
+ *
+ * Description:
+ *	This function allocates the memory for all descriptor rings.
+ *	Each ring is aligned for the desriptor alignment and no ring
+ *	has a 4 GByte boundary in it (because the upper 32 bit must
+ *	be constant for all descriptiors in one rings).
+ *
+ * Returns:
+ *	SK_TRUE, if all memory could be allocated
+ *	SK_FALSE, if not
+ */
+static __devinit SK_BOOL BoardAllocMem(SK_AC	*pAC)
+{
+caddr_t		pDescrMem;	/* pointer to descriptor memory area */
+size_t		AllocLength;	/* length of complete descriptor area */
+int		i;		/* loop counter */
+unsigned long	BusAddr;
+
+	
+	/* rings plus one for alignment (do not cross 4 GB boundary) */
+	/* RX_RING_SIZE is assumed bigger than TX_RING_SIZE */
+#if (BITS_PER_LONG == 32)
+	AllocLength = (RX_RING_SIZE + TX_RING_SIZE) * pAC->GIni.GIMacsFound + 8;
+#else
+	AllocLength = (RX_RING_SIZE + TX_RING_SIZE) * pAC->GIni.GIMacsFound
+		+ RX_RING_SIZE + 8;
+#endif
+
+	pDescrMem = pci_alloc_consistent(pAC->PciDev, AllocLength,
+					 &pAC->pDescrMemDMA);
+
+	if (pDescrMem == NULL) {
+		return (SK_FALSE);
+	}
+	pAC->pDescrMem = pDescrMem;
+	BusAddr = (unsigned long) pAC->pDescrMemDMA;
+
+	/* Descriptors need 8 byte alignment, and this is ensured
+	 * by pci_alloc_consistent.
+	 */
+	for (i=0; i<pAC->GIni.GIMacsFound; i++) {
+		SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_TX_PROGRESS,
+			("TX%d/A: pDescrMem: %lX,   PhysDescrMem: %lX\n",
+			i, (unsigned long) pDescrMem,
+			BusAddr));
+		pAC->TxPort[i][0].pTxDescrRing = pDescrMem;
+		pAC->TxPort[i][0].VTxDescrRing = BusAddr;
+		pDescrMem += TX_RING_SIZE;
+		BusAddr += TX_RING_SIZE;
+	
+		SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_TX_PROGRESS,
+			("RX%d: pDescrMem: %lX,   PhysDescrMem: %lX\n",
+			i, (unsigned long) pDescrMem,
+			(unsigned long)BusAddr));
+		pAC->RxPort[i].pRxDescrRing = pDescrMem;
+		pAC->RxPort[i].VRxDescrRing = BusAddr;
+		pDescrMem += RX_RING_SIZE;
+		BusAddr += RX_RING_SIZE;
+	} /* for */
+	
+	return (SK_TRUE);
+} /* BoardAllocMem */
+
+
+/****************************************************************************
+ *
+ *	BoardFreeMem - reverse of BoardAllocMem
+ *
+ * Description:
+ *	Free all memory allocated in BoardAllocMem: adapter context,
+ *	descriptor rings, locks.
+ *
+ * Returns:	N/A
+ */
+static void BoardFreeMem(
+SK_AC		*pAC)
+{
+size_t		AllocLength;	/* length of complete descriptor area */
+
+	SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY,
+		("BoardFreeMem\n"));
+#if (BITS_PER_LONG == 32)
+	AllocLength = (RX_RING_SIZE + TX_RING_SIZE) * pAC->GIni.GIMacsFound + 8;
+#else
+	AllocLength = (RX_RING_SIZE + TX_RING_SIZE) * pAC->GIni.GIMacsFound
+		+ RX_RING_SIZE + 8;
+#endif
+
+	pci_free_consistent(pAC->PciDev, AllocLength,
+			    pAC->pDescrMem, pAC->pDescrMemDMA);
+	pAC->pDescrMem = NULL;
+} /* BoardFreeMem */
+
+
+/*****************************************************************************
+ *
+ * 	BoardInitMem - initiate the descriptor rings
+ *
+ * Description:
+ *	This function sets the descriptor rings up in memory.
+ *	The adapter is initialized with the descriptor start addresses.
+ *
+ * Returns:	N/A
+ */
+static __devinit void BoardInitMem(SK_AC *pAC)
+{
+int	i;		/* loop counter */
+int	RxDescrSize;	/* the size of a rx descriptor rounded up to alignment*/
+int	TxDescrSize;	/* the size of a tx descriptor rounded up to alignment*/
+
+	SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY,
+		("BoardInitMem\n"));
+
+	RxDescrSize = (((sizeof(RXD) - 1) / DESCR_ALIGN) + 1) * DESCR_ALIGN;
+	pAC->RxDescrPerRing = RX_RING_SIZE / RxDescrSize;
+	TxDescrSize = (((sizeof(TXD) - 1) / DESCR_ALIGN) + 1) * DESCR_ALIGN;
+	pAC->TxDescrPerRing = TX_RING_SIZE / RxDescrSize;
+	
+	for (i=0; i<pAC->GIni.GIMacsFound; i++) {
+		SetupRing(
+			pAC,
+			pAC->TxPort[i][0].pTxDescrRing,
+			pAC->TxPort[i][0].VTxDescrRing,
+			(RXD**)&pAC->TxPort[i][0].pTxdRingHead,
+			(RXD**)&pAC->TxPort[i][0].pTxdRingTail,
+			(RXD**)&pAC->TxPort[i][0].pTxdRingPrev,
+			&pAC->TxPort[i][0].TxdRingFree,
+			SK_TRUE);
+		SetupRing(
+			pAC,
+			pAC->RxPort[i].pRxDescrRing,
+			pAC->RxPort[i].VRxDescrRing,
+			&pAC->RxPort[i].pRxdRingHead,
+			&pAC->RxPort[i].pRxdRingTail,
+			&pAC->RxPort[i].pRxdRingPrev,
+			&pAC->RxPort[i].RxdRingFree,
+			SK_FALSE);
+	}
+} /* BoardInitMem */
+
+
+/*****************************************************************************
+ *
+ * 	SetupRing - create one descriptor ring
+ *
+ * Description:
+ *	This function creates one descriptor ring in the given memory area.
+ *	The head, tail and number of free descriptors in the ring are set.
+ *
+ * Returns:
+ *	none
+ */
+static void SetupRing(
+SK_AC		*pAC,
+void		*pMemArea,	/* a pointer to the memory area for the ring */
+uintptr_t	VMemArea,	/* the virtual bus address of the memory area */
+RXD		**ppRingHead,	/* address where the head should be written */
+RXD		**ppRingTail,	/* address where the tail should be written */
+RXD		**ppRingPrev,	/* address where the tail should be written */
+int		*pRingFree,	/* address where the # of free descr. goes */
+SK_BOOL		IsTx)		/* flag: is this a tx ring */
+{
+int	i;		/* loop counter */
+int	DescrSize;	/* the size of a descriptor rounded up to alignment*/
+int	DescrNum;	/* number of descriptors per ring */
+RXD	*pDescr;	/* pointer to a descriptor (receive or transmit) */
+RXD	*pNextDescr;	/* pointer to the next descriptor */
+RXD	*pPrevDescr;	/* pointer to the previous descriptor */
+uintptr_t VNextDescr;	/* the virtual bus address of the next descriptor */
+
+	if (IsTx == SK_TRUE) {
+		DescrSize = (((sizeof(TXD) - 1) / DESCR_ALIGN) + 1) *
+			DESCR_ALIGN;
+		DescrNum = TX_RING_SIZE / DescrSize;
+	} else {
+		DescrSize = (((sizeof(RXD) - 1) / DESCR_ALIGN) + 1) *
+			DESCR_ALIGN;
+		DescrNum = RX_RING_SIZE / DescrSize;
+	}
+	
+	SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_TX_PROGRESS,
+		("Descriptor size: %d   Descriptor Number: %d\n",
+		DescrSize,DescrNum));
+	
+	pDescr = (RXD*) pMemArea;
+	pPrevDescr = NULL;
+	pNextDescr = (RXD*) (((char*)pDescr) + DescrSize);
+	VNextDescr = VMemArea + DescrSize;
+	for(i=0; i<DescrNum; i++) {
+		/* set the pointers right */
+		pDescr->VNextRxd = VNextDescr & 0xffffffffULL;
+		pDescr->pNextRxd = pNextDescr;
+		if (!IsTx) pDescr->TcpSumStarts = ETH_HLEN << 16 | ETH_HLEN;
+
+		/* advance one step */
+		pPrevDescr = pDescr;
+		pDescr = pNextDescr;
+		pNextDescr = (RXD*) (((char*)pDescr) + DescrSize);
+		VNextDescr += DescrSize;
+	}
+	pPrevDescr->pNextRxd = (RXD*) pMemArea;
+	pPrevDescr->VNextRxd = VMemArea;
+	pDescr = (RXD*) pMemArea;
+	*ppRingHead = (RXD*) pMemArea;
+	*ppRingTail = *ppRingHead;
+	*ppRingPrev = pPrevDescr;
+	*pRingFree = DescrNum;
+} /* SetupRing */
+
+
+/*****************************************************************************
+ *
+ * 	PortReInitBmu - re-initiate the descriptor rings for one port
+ *
+ * Description:
+ *	This function reinitializes the descriptor rings of one port
+ *	in memory. The port must be stopped before.
+ *	The HW is initialized with the descriptor start addresses.
+ *
+ * Returns:
+ *	none
+ */
+static void PortReInitBmu(
+SK_AC	*pAC,		/* pointer to adapter context */
+int	PortIndex)	/* index of the port for which to re-init */
+{
+	SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY,
+		("PortReInitBmu "));
+
+	/* set address of first descriptor of ring in BMU */
+	SK_OUT32(pAC->IoBase, TxQueueAddr[PortIndex][TX_PRIO_LOW]+ Q_DA_L,
+		(uint32_t)(((caddr_t)
+		(pAC->TxPort[PortIndex][TX_PRIO_LOW].pTxdRingHead) -
+		pAC->TxPort[PortIndex][TX_PRIO_LOW].pTxDescrRing +
+		pAC->TxPort[PortIndex][TX_PRIO_LOW].VTxDescrRing) &
+		0xFFFFFFFF));
+	SK_OUT32(pAC->IoBase, TxQueueAddr[PortIndex][TX_PRIO_LOW]+ Q_DA_H,
+		(uint32_t)(((caddr_t)
+		(pAC->TxPort[PortIndex][TX_PRIO_LOW].pTxdRingHead) -
+		pAC->TxPort[PortIndex][TX_PRIO_LOW].pTxDescrRing +
+		pAC->TxPort[PortIndex][TX_PRIO_LOW].VTxDescrRing) >> 32));
+	SK_OUT32(pAC->IoBase, RxQueueAddr[PortIndex]+Q_DA_L,
+		(uint32_t)(((caddr_t)(pAC->RxPort[PortIndex].pRxdRingHead) -
+		pAC->RxPort[PortIndex].pRxDescrRing +
+		pAC->RxPort[PortIndex].VRxDescrRing) & 0xFFFFFFFF));
+	SK_OUT32(pAC->IoBase, RxQueueAddr[PortIndex]+Q_DA_H,
+		(uint32_t)(((caddr_t)(pAC->RxPort[PortIndex].pRxdRingHead) -
+		pAC->RxPort[PortIndex].pRxDescrRing +
+		pAC->RxPort[PortIndex].VRxDescrRing) >> 32));
+} /* PortReInitBmu */
+
+
+/****************************************************************************
+ *
+ *	SkGeIsr - handle adapter interrupts
+ *
+ * Description:
+ *	The interrupt routine is called when the network adapter
+ *	generates an interrupt. It may also be called if another device
+ *	shares this interrupt vector with the driver.
+ *
+ * Returns: N/A
+ *
+ */
+static SkIsrRetVar SkGeIsr(int irq, void *dev_id)
+{
+struct SK_NET_DEVICE *dev = (struct SK_NET_DEVICE *)dev_id;
+DEV_NET		*pNet;
+SK_AC		*pAC;
+SK_U32		IntSrc;		/* interrupts source register contents */	
+
+	pNet = netdev_priv(dev);
+	pAC = pNet->pAC;
+	
+	/*
+	 * Check and process if its our interrupt
+	 */
+	SK_IN32(pAC->IoBase, B0_SP_ISRC, &IntSrc);
+	if (IntSrc == 0) {
+		return SkIsrRetNone;
+	}
+
+	while (((IntSrc & IRQ_MASK) & ~SPECIAL_IRQS) != 0) {
+#if 0 /* software irq currently not used */
+		if (IntSrc & IS_IRQ_SW) {
+			SK_DBG_MSG(NULL, SK_DBGMOD_DRV,
+				SK_DBGCAT_DRV_INT_SRC,
+				("Software IRQ\n"));
+		}
+#endif
+		if (IntSrc & IS_R1_F) {
+			SK_DBG_MSG(NULL, SK_DBGMOD_DRV,
+				SK_DBGCAT_DRV_INT_SRC,
+				("EOF RX1 IRQ\n"));
+			ReceiveIrq(pAC, &pAC->RxPort[0], SK_TRUE);
+			SK_PNMI_CNT_RX_INTR(pAC, 0);
+		}
+		if (IntSrc & IS_R2_F) {
+			SK_DBG_MSG(NULL, SK_DBGMOD_DRV,
+				SK_DBGCAT_DRV_INT_SRC,
+				("EOF RX2 IRQ\n"));
+			ReceiveIrq(pAC, &pAC->RxPort[1], SK_TRUE);
+			SK_PNMI_CNT_RX_INTR(pAC, 1);
+		}
+#ifdef USE_TX_COMPLETE /* only if tx complete interrupt used */
+		if (IntSrc & IS_XA1_F) {
+			SK_DBG_MSG(NULL, SK_DBGMOD_DRV,
+				SK_DBGCAT_DRV_INT_SRC,
+				("EOF AS TX1 IRQ\n"));
+			SK_PNMI_CNT_TX_INTR(pAC, 0);
+			spin_lock(&pAC->TxPort[0][TX_PRIO_LOW].TxDesRingLock);
+			FreeTxDescriptors(pAC, &pAC->TxPort[0][TX_PRIO_LOW]);
+			spin_unlock(&pAC->TxPort[0][TX_PRIO_LOW].TxDesRingLock);
+		}
+		if (IntSrc & IS_XA2_F) {
+			SK_DBG_MSG(NULL, SK_DBGMOD_DRV,
+				SK_DBGCAT_DRV_INT_SRC,
+				("EOF AS TX2 IRQ\n"));
+			SK_PNMI_CNT_TX_INTR(pAC, 1);
+			spin_lock(&pAC->TxPort[1][TX_PRIO_LOW].TxDesRingLock);
+			FreeTxDescriptors(pAC, &pAC->TxPort[1][TX_PRIO_LOW]);
+			spin_unlock(&pAC->TxPort[1][TX_PRIO_LOW].TxDesRingLock);
+		}
+#if 0 /* only if sync. queues used */
+		if (IntSrc & IS_XS1_F) {
+			SK_DBG_MSG(NULL, SK_DBGMOD_DRV,
+				SK_DBGCAT_DRV_INT_SRC,
+				("EOF SY TX1 IRQ\n"));
+			SK_PNMI_CNT_TX_INTR(pAC, 1);
+			spin_lock(&pAC->TxPort[0][TX_PRIO_HIGH].TxDesRingLock);
+			FreeTxDescriptors(pAC, 0, TX_PRIO_HIGH);
+			spin_unlock(&pAC->TxPort[0][TX_PRIO_HIGH].TxDesRingLock);
+			ClearTxIrq(pAC, 0, TX_PRIO_HIGH);
+		}
+		if (IntSrc & IS_XS2_F) {
+			SK_DBG_MSG(NULL, SK_DBGMOD_DRV,
+				SK_DBGCAT_DRV_INT_SRC,
+				("EOF SY TX2 IRQ\n"));
+			SK_PNMI_CNT_TX_INTR(pAC, 1);
+			spin_lock(&pAC->TxPort[1][TX_PRIO_HIGH].TxDesRingLock);
+			FreeTxDescriptors(pAC, 1, TX_PRIO_HIGH);
+			spin_unlock(&pAC->TxPort[1][TX_PRIO_HIGH].TxDesRingLock);
+			ClearTxIrq(pAC, 1, TX_PRIO_HIGH);
+		}
+#endif
+#endif
+
+		/* do all IO at once */
+		if (IntSrc & IS_R1_F)
+			ClearAndStartRx(pAC, 0);
+		if (IntSrc & IS_R2_F)
+			ClearAndStartRx(pAC, 1);
+#ifdef USE_TX_COMPLETE /* only if tx complete interrupt used */
+		if (IntSrc & IS_XA1_F)
+			ClearTxIrq(pAC, 0, TX_PRIO_LOW);
+		if (IntSrc & IS_XA2_F)
+			ClearTxIrq(pAC, 1, TX_PRIO_LOW);
+#endif
+		SK_IN32(pAC->IoBase, B0_ISRC, &IntSrc);
+	} /* while (IntSrc & IRQ_MASK != 0) */
+
+	IntSrc &= pAC->GIni.GIValIrqMask;
+	if ((IntSrc & SPECIAL_IRQS) || pAC->CheckQueue) {
+		SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_INT_SRC,
+			("SPECIAL IRQ DP-Cards => %x\n", IntSrc));
+		pAC->CheckQueue = SK_FALSE;
+		spin_lock(&pAC->SlowPathLock);
+		if (IntSrc & SPECIAL_IRQS)
+			SkGeSirqIsr(pAC, pAC->IoBase, IntSrc);
+
+		SkEventDispatcher(pAC, pAC->IoBase);
+		spin_unlock(&pAC->SlowPathLock);
+	}
+	/*
+	 * do it all again is case we cleared an interrupt that
+	 * came in after handling the ring (OUTs may be delayed
+	 * in hardware buffers, but are through after IN)
+	 *
+	 * rroesler: has been commented out and shifted to
+	 *           SkGeDrvEvent(), because it is timer
+	 *           guarded now
+	 *
+	ReceiveIrq(pAC, &pAC->RxPort[0], SK_TRUE);
+	ReceiveIrq(pAC, &pAC->RxPort[1], SK_TRUE);
+	 */
+
+	if (pAC->CheckQueue) {
+		pAC->CheckQueue = SK_FALSE;
+		spin_lock(&pAC->SlowPathLock);
+		SkEventDispatcher(pAC, pAC->IoBase);
+		spin_unlock(&pAC->SlowPathLock);
+	}
+
+	/* IRQ is processed - Enable IRQs again*/
+	SK_OUT32(pAC->IoBase, B0_IMSK, pAC->GIni.GIValIrqMask);
+
+		return SkIsrRetHandled;
+} /* SkGeIsr */
+
+
+/****************************************************************************
+ *
+ *	SkGeIsrOnePort - handle adapter interrupts for single port adapter
+ *
+ * Description:
+ *	The interrupt routine is called when the network adapter
+ *	generates an interrupt. It may also be called if another device
+ *	shares this interrupt vector with the driver.
+ *	This is the same as above, but handles only one port.
+ *
+ * Returns: N/A
+ *
+ */
+static SkIsrRetVar SkGeIsrOnePort(int irq, void *dev_id)
+{
+struct SK_NET_DEVICE *dev = (struct SK_NET_DEVICE *)dev_id;
+DEV_NET		*pNet;
+SK_AC		*pAC;
+SK_U32		IntSrc;		/* interrupts source register contents */	
+
+	pNet = netdev_priv(dev);
+	pAC = pNet->pAC;
+	
+	/*
+	 * Check and process if its our interrupt
+	 */
+	SK_IN32(pAC->IoBase, B0_SP_ISRC, &IntSrc);
+	if (IntSrc == 0) {
+		return SkIsrRetNone;
+	}
+	
+	while (((IntSrc & IRQ_MASK) & ~SPECIAL_IRQS) != 0) {
+#if 0 /* software irq currently not used */
+		if (IntSrc & IS_IRQ_SW) {
+			SK_DBG_MSG(NULL, SK_DBGMOD_DRV,
+				SK_DBGCAT_DRV_INT_SRC,
+				("Software IRQ\n"));
+		}
+#endif
+		if (IntSrc & IS_R1_F) {
+			SK_DBG_MSG(NULL, SK_DBGMOD_DRV,
+				SK_DBGCAT_DRV_INT_SRC,
+				("EOF RX1 IRQ\n"));
+			ReceiveIrq(pAC, &pAC->RxPort[0], SK_TRUE);
+			SK_PNMI_CNT_RX_INTR(pAC, 0);
+		}
+#ifdef USE_TX_COMPLETE /* only if tx complete interrupt used */
+		if (IntSrc & IS_XA1_F) {
+			SK_DBG_MSG(NULL, SK_DBGMOD_DRV,
+				SK_DBGCAT_DRV_INT_SRC,
+				("EOF AS TX1 IRQ\n"));
+			SK_PNMI_CNT_TX_INTR(pAC, 0);
+			spin_lock(&pAC->TxPort[0][TX_PRIO_LOW].TxDesRingLock);
+			FreeTxDescriptors(pAC, &pAC->TxPort[0][TX_PRIO_LOW]);
+			spin_unlock(&pAC->TxPort[0][TX_PRIO_LOW].TxDesRingLock);
+		}
+#if 0 /* only if sync. queues used */
+		if (IntSrc & IS_XS1_F) {
+			SK_DBG_MSG(NULL, SK_DBGMOD_DRV,
+				SK_DBGCAT_DRV_INT_SRC,
+				("EOF SY TX1 IRQ\n"));
+			SK_PNMI_CNT_TX_INTR(pAC, 0);
+			spin_lock(&pAC->TxPort[0][TX_PRIO_HIGH].TxDesRingLock);
+			FreeTxDescriptors(pAC, 0, TX_PRIO_HIGH);
+			spin_unlock(&pAC->TxPort[0][TX_PRIO_HIGH].TxDesRingLock);
+			ClearTxIrq(pAC, 0, TX_PRIO_HIGH);
+		}
+#endif
+#endif
+
+		/* do all IO at once */
+		if (IntSrc & IS_R1_F)
+			ClearAndStartRx(pAC, 0);
+#ifdef USE_TX_COMPLETE /* only if tx complete interrupt used */
+		if (IntSrc & IS_XA1_F)
+			ClearTxIrq(pAC, 0, TX_PRIO_LOW);
+#endif
+		SK_IN32(pAC->IoBase, B0_ISRC, &IntSrc);
+	} /* while (IntSrc & IRQ_MASK != 0) */
+	
+	IntSrc &= pAC->GIni.GIValIrqMask;
+	if ((IntSrc & SPECIAL_IRQS) || pAC->CheckQueue) {
+		SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_INT_SRC,
+			("SPECIAL IRQ SP-Cards => %x\n", IntSrc));
+		pAC->CheckQueue = SK_FALSE;
+		spin_lock(&pAC->SlowPathLock);
+		if (IntSrc & SPECIAL_IRQS)
+			SkGeSirqIsr(pAC, pAC->IoBase, IntSrc);
+
+		SkEventDispatcher(pAC, pAC->IoBase);
+		spin_unlock(&pAC->SlowPathLock);
+	}
+	/*
+	 * do it all again is case we cleared an interrupt that
+	 * came in after handling the ring (OUTs may be delayed
+	 * in hardware buffers, but are through after IN)
+	 *
+	 * rroesler: has been commented out and shifted to
+	 *           SkGeDrvEvent(), because it is timer
+	 *           guarded now
+	 *
+	ReceiveIrq(pAC, &pAC->RxPort[0], SK_TRUE);
+	 */
+
+	/* IRQ is processed - Enable IRQs again*/
+	SK_OUT32(pAC->IoBase, B0_IMSK, pAC->GIni.GIValIrqMask);
+
+		return SkIsrRetHandled;
+} /* SkGeIsrOnePort */
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+/****************************************************************************
+ *
+ * 	SkGePollController - polling receive, for netconsole
+ *
+ * Description:
+ *	Polling receive - used by netconsole and other diagnostic tools
+ *	to allow network i/o with interrupts disabled.
+ *
+ * Returns: N/A
+ */
+static void SkGePollController(struct net_device *dev)
+{
+	disable_irq(dev->irq);
+	SkGeIsr(dev->irq, dev);
+	enable_irq(dev->irq);
+}
+#endif
+
+/****************************************************************************
+ *
+ *	SkGeOpen - handle start of initialized adapter
+ *
+ * Description:
+ *	This function starts the initialized adapter.
+ *	The board level variable is set and the adapter is
+ *	brought to full functionality.
+ *	The device flags are set for operation.
+ *	Do all necessary level 2 initialization, enable interrupts and
+ *	give start command to RLMT.
+ *
+ * Returns:
+ *	0 on success
+ *	!= 0 on error
+ */
+static int SkGeOpen(
+struct SK_NET_DEVICE	*dev)
+{
+	DEV_NET			*pNet;
+	SK_AC			*pAC;
+	unsigned long	Flags;		/* for spin lock */
+	int				i;
+	SK_EVPARA		EvPara;		/* an event parameter union */
+
+	pNet = netdev_priv(dev);
+	pAC = pNet->pAC;
+	
+	SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY,
+		("SkGeOpen: pAC=0x%lX:\n", (unsigned long)pAC));
+
+#ifdef SK_DIAG_SUPPORT
+	if (pAC->DiagModeActive == DIAG_ACTIVE) {
+		if (pAC->Pnmi.DiagAttached == SK_DIAG_RUNNING) {
+			return (-1);   /* still in use by diag; deny actions */
+		} 
+	}
+#endif
+
+	/* Set blink mode */
+	if ((pAC->PciDev->vendor == 0x1186) || (pAC->PciDev->vendor == 0x11ab ))
+		pAC->GIni.GILedBlinkCtrl = OEM_CONFIG_VALUE;
+
+	if (pAC->BoardLevel == SK_INIT_DATA) {
+		/* level 1 init common modules here */
+		if (SkGeInit(pAC, pAC->IoBase, SK_INIT_IO) != 0) {
+			printk("%s: HWInit (1) failed.\n", pAC->dev[pNet->PortNr]->name);
+			return (-1);
+		}
+		SkI2cInit	(pAC, pAC->IoBase, SK_INIT_IO);
+		SkEventInit	(pAC, pAC->IoBase, SK_INIT_IO);
+		SkPnmiInit	(pAC, pAC->IoBase, SK_INIT_IO);
+		SkAddrInit	(pAC, pAC->IoBase, SK_INIT_IO);
+		SkRlmtInit	(pAC, pAC->IoBase, SK_INIT_IO);
+		SkTimerInit	(pAC, pAC->IoBase, SK_INIT_IO);
+		pAC->BoardLevel = SK_INIT_IO;
+	}
+
+	if (pAC->BoardLevel != SK_INIT_RUN) {
+		/* tschilling: Level 2 init modules here, check return value. */
+		if (SkGeInit(pAC, pAC->IoBase, SK_INIT_RUN) != 0) {
+			printk("%s: HWInit (2) failed.\n", pAC->dev[pNet->PortNr]->name);
+			return (-1);
+		}
+		SkI2cInit	(pAC, pAC->IoBase, SK_INIT_RUN);
+		SkEventInit	(pAC, pAC->IoBase, SK_INIT_RUN);
+		SkPnmiInit	(pAC, pAC->IoBase, SK_INIT_RUN);
+		SkAddrInit	(pAC, pAC->IoBase, SK_INIT_RUN);
+		SkRlmtInit	(pAC, pAC->IoBase, SK_INIT_RUN);
+		SkTimerInit	(pAC, pAC->IoBase, SK_INIT_RUN);
+		pAC->BoardLevel = SK_INIT_RUN;
+	}
+
+	for (i=0; i<pAC->GIni.GIMacsFound; i++) {
+		/* Enable transmit descriptor polling. */
+		SkGePollTxD(pAC, pAC->IoBase, i, SK_TRUE);
+		FillRxRing(pAC, &pAC->RxPort[i]);
+	}
+	SkGeYellowLED(pAC, pAC->IoBase, 1);
+
+	StartDrvCleanupTimer(pAC);
+	SkDimEnableModerationIfNeeded(pAC);	
+	SkDimDisplayModerationSettings(pAC);
+
+	pAC->GIni.GIValIrqMask &= IRQ_MASK;
+
+	/* enable Interrupts */
+	SK_OUT32(pAC->IoBase, B0_IMSK, pAC->GIni.GIValIrqMask);
+	SK_OUT32(pAC->IoBase, B0_HWE_IMSK, IRQ_HWE_MASK);
+
+	spin_lock_irqsave(&pAC->SlowPathLock, Flags);
+
+	if ((pAC->RlmtMode != 0) && (pAC->MaxPorts == 0)) {
+		EvPara.Para32[0] = pAC->RlmtNets;
+		EvPara.Para32[1] = -1;
+		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_SET_NETS,
+			EvPara);
+		EvPara.Para32[0] = pAC->RlmtMode;
+		EvPara.Para32[1] = 0;
+		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_MODE_CHANGE,
+			EvPara);
+	}
+
+	EvPara.Para32[0] = pNet->NetNr;
+	EvPara.Para32[1] = -1;
+	SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_START, EvPara);
+	SkEventDispatcher(pAC, pAC->IoBase);
+	spin_unlock_irqrestore(&pAC->SlowPathLock, Flags);
+
+	pAC->MaxPorts++;
+
+
+	SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY,
+		("SkGeOpen suceeded\n"));
+
+	return (0);
+} /* SkGeOpen */
+
+
+/****************************************************************************
+ *
+ *	SkGeClose - Stop initialized adapter
+ *
+ * Description:
+ *	Close initialized adapter.
+ *
+ * Returns:
+ *	0 - on success
+ *	error code - on error
+ */
+static int SkGeClose(
+struct SK_NET_DEVICE	*dev)
+{
+	DEV_NET		*pNet;
+	DEV_NET		*newPtrNet;
+	SK_AC		*pAC;
+
+	unsigned long	Flags;		/* for spin lock */
+	int		i;
+	int		PortIdx;
+	SK_EVPARA	EvPara;
+
+	SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY,
+		("SkGeClose: pAC=0x%lX ", (unsigned long)pAC));
+
+	pNet = netdev_priv(dev);
+	pAC = pNet->pAC;
+
+#ifdef SK_DIAG_SUPPORT
+	if (pAC->DiagModeActive == DIAG_ACTIVE) {
+		if (pAC->DiagFlowCtrl == SK_FALSE) {
+			/* 
+			** notify that the interface which has been closed
+			** by operator interaction must not be started up 
+			** again when the DIAG has finished. 
+			*/
+			newPtrNet = netdev_priv(pAC->dev[0]);
+			if (newPtrNet == pNet) {
+				pAC->WasIfUp[0] = SK_FALSE;
+			} else {
+				pAC->WasIfUp[1] = SK_FALSE;
+			}
+			return 0; /* return to system everything is fine... */
+		} else {
+			pAC->DiagFlowCtrl = SK_FALSE;
+		}
+	}
+#endif
+
+	netif_stop_queue(dev);
+
+	if (pAC->RlmtNets == 1)
+		PortIdx = pAC->ActivePort;
+	else
+		PortIdx = pNet->NetNr;
+
+        StopDrvCleanupTimer(pAC);
+
+	/*
+	 * Clear multicast table, promiscuous mode ....
+	 */
+	SkAddrMcClear(pAC, pAC->IoBase, PortIdx, 0);
+	SkAddrPromiscuousChange(pAC, pAC->IoBase, PortIdx,
+		SK_PROM_MODE_NONE);
+
+	if (pAC->MaxPorts == 1) {
+		spin_lock_irqsave(&pAC->SlowPathLock, Flags);
+		/* disable interrupts */
+		SK_OUT32(pAC->IoBase, B0_IMSK, 0);
+		EvPara.Para32[0] = pNet->NetNr;
+		EvPara.Para32[1] = -1;
+		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_STOP, EvPara);
+		SkEventDispatcher(pAC, pAC->IoBase);
+		SK_OUT32(pAC->IoBase, B0_IMSK, 0);
+		/* stop the hardware */
+		SkGeDeInit(pAC, pAC->IoBase);
+		pAC->BoardLevel = SK_INIT_DATA;
+		spin_unlock_irqrestore(&pAC->SlowPathLock, Flags);
+	} else {
+
+		spin_lock_irqsave(&pAC->SlowPathLock, Flags);
+		EvPara.Para32[0] = pNet->NetNr;
+		EvPara.Para32[1] = -1;
+		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_STOP, EvPara);
+		SkPnmiEvent(pAC, pAC->IoBase, SK_PNMI_EVT_XMAC_RESET, EvPara);
+		SkEventDispatcher(pAC, pAC->IoBase);
+		spin_unlock_irqrestore(&pAC->SlowPathLock, Flags);
+		
+		/* Stop port */
+		spin_lock_irqsave(&pAC->TxPort[pNet->PortNr]
+			[TX_PRIO_LOW].TxDesRingLock, Flags);
+		SkGeStopPort(pAC, pAC->IoBase, pNet->PortNr,
+			SK_STOP_ALL, SK_HARD_RST);
+		spin_unlock_irqrestore(&pAC->TxPort[pNet->PortNr]
+			[TX_PRIO_LOW].TxDesRingLock, Flags);
+	}
+
+	if (pAC->RlmtNets == 1) {
+		/* clear all descriptor rings */
+		for (i=0; i<pAC->GIni.GIMacsFound; i++) {
+			ReceiveIrq(pAC, &pAC->RxPort[i], SK_TRUE);
+			ClearRxRing(pAC, &pAC->RxPort[i]);
+			ClearTxRing(pAC, &pAC->TxPort[i][TX_PRIO_LOW]);
+		}
+	} else {
+		/* clear port descriptor rings */
+		ReceiveIrq(pAC, &pAC->RxPort[pNet->PortNr], SK_TRUE);
+		ClearRxRing(pAC, &pAC->RxPort[pNet->PortNr]);
+		ClearTxRing(pAC, &pAC->TxPort[pNet->PortNr][TX_PRIO_LOW]);
+	}
+
+	SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY,
+		("SkGeClose: done "));
+
+	SK_MEMSET(&(pAC->PnmiBackup), 0, sizeof(SK_PNMI_STRUCT_DATA));
+	SK_MEMCPY(&(pAC->PnmiBackup), &(pAC->PnmiStruct), 
+			sizeof(SK_PNMI_STRUCT_DATA));
+
+	pAC->MaxPorts--;
+
+	return (0);
+} /* SkGeClose */
+
+
+/*****************************************************************************
+ *
+ * 	SkGeXmit - Linux frame transmit function
+ *
+ * Description:
+ *	The system calls this function to send frames onto the wire.
+ *	It puts the frame in the tx descriptor ring. If the ring is
+ *	full then, the 'tbusy' flag is set.
+ *
+ * Returns:
+ *	0, if everything is ok
+ *	!=0, on error
+ * WARNING: returning 1 in 'tbusy' case caused system crashes (double
+ *	allocated skb's) !!!
+ */
+static int SkGeXmit(struct sk_buff *skb, struct SK_NET_DEVICE *dev)
+{
+DEV_NET		*pNet;
+SK_AC		*pAC;
+int			Rc;	/* return code of XmitFrame */
+
+	pNet = netdev_priv(dev);
+	pAC = pNet->pAC;
+
+	if ((!skb_shinfo(skb)->nr_frags) ||
+		(pAC->GIni.GIChipId == CHIP_ID_GENESIS)) {
+		/* Don't activate scatter-gather and hardware checksum */
+
+		if (pAC->RlmtNets == 2)
+			Rc = XmitFrame(
+				pAC,
+				&pAC->TxPort[pNet->PortNr][TX_PRIO_LOW],
+				skb);
+		else
+			Rc = XmitFrame(
+				pAC,
+				&pAC->TxPort[pAC->ActivePort][TX_PRIO_LOW],
+				skb);
+	} else {
+		/* scatter-gather and hardware TCP checksumming anabled*/
+		if (pAC->RlmtNets == 2)
+			Rc = XmitFrameSG(
+				pAC,
+				&pAC->TxPort[pNet->PortNr][TX_PRIO_LOW],
+				skb);
+		else
+			Rc = XmitFrameSG(
+				pAC,
+				&pAC->TxPort[pAC->ActivePort][TX_PRIO_LOW],
+				skb);
+	}
+
+	/* Transmitter out of resources? */
+	if (Rc <= 0) {
+		netif_stop_queue(dev);
+	}
+
+	/* If not taken, give buffer ownership back to the
+	 * queueing layer.
+	 */
+	if (Rc < 0)
+		return (1);
+
+	dev->trans_start = jiffies;
+	return (0);
+} /* SkGeXmit */
+
+
+/*****************************************************************************
+ *
+ * 	XmitFrame - fill one socket buffer into the transmit ring
+ *
+ * Description:
+ *	This function puts a message into the transmit descriptor ring
+ *	if there is a descriptors left.
+ *	Linux skb's consist of only one continuous buffer.
+ *	The first step locks the ring. It is held locked
+ *	all time to avoid problems with SWITCH_../PORT_RESET.
+ *	Then the descriptoris allocated.
+ *	The second part is linking the buffer to the descriptor.
+ *	At the very last, the Control field of the descriptor
+ *	is made valid for the BMU and a start TX command is given
+ *	if necessary.
+ *
+ * Returns:
+ *	> 0 - on succes: the number of bytes in the message
+ *	= 0 - on resource shortage: this frame sent or dropped, now
+ *		the ring is full ( -> set tbusy)
+ *	< 0 - on failure: other problems ( -> return failure to upper layers)
+ */
+static int XmitFrame(
+SK_AC 		*pAC,		/* pointer to adapter context           */
+TX_PORT		*pTxPort,	/* pointer to struct of port to send to */
+struct sk_buff	*pMessage)	/* pointer to send-message              */
+{
+	TXD		*pTxd;		/* the rxd to fill */
+	TXD		*pOldTxd;
+	unsigned long	 Flags;
+	SK_U64		 PhysAddr;
+	int		 BytesSend = pMessage->len;
+
+	SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_TX_PROGRESS, ("X"));
+
+	spin_lock_irqsave(&pTxPort->TxDesRingLock, Flags);
+#ifndef USE_TX_COMPLETE
+	FreeTxDescriptors(pAC, pTxPort);
+#endif
+	if (pTxPort->TxdRingFree == 0) {
+		/* 
+		** no enough free descriptors in ring at the moment.
+		** Maybe free'ing some old one help?
+		*/
+		FreeTxDescriptors(pAC, pTxPort);
+		if (pTxPort->TxdRingFree == 0) {
+			spin_unlock_irqrestore(&pTxPort->TxDesRingLock, Flags);
+			SK_PNMI_CNT_NO_TX_BUF(pAC, pTxPort->PortIndex);
+			SK_DBG_MSG(NULL, SK_DBGMOD_DRV,
+				SK_DBGCAT_DRV_TX_PROGRESS,
+				("XmitFrame failed\n"));
+			/* 
+			** the desired message can not be sent
+			** Because tbusy seems to be set, the message 
+			** should not be freed here. It will be used 
+			** by the scheduler of the ethernet handler 
+			*/
+			return (-1);
+		}
+	}
+
+	/*
+	** If the passed socket buffer is of smaller MTU-size than 60,
+	** copy everything into new buffer and fill all bytes between
+	** the original packet end and the new packet end of 60 with 0x00.
+	** This is to resolve faulty padding by the HW with 0xaa bytes.
+	*/
+	if (BytesSend < C_LEN_ETHERNET_MINSIZE) {
+		if (skb_padto(pMessage, C_LEN_ETHERNET_MINSIZE)) {
+			spin_unlock_irqrestore(&pTxPort->TxDesRingLock, Flags);
+			return 0;
+		}
+		pMessage->len = C_LEN_ETHERNET_MINSIZE;
+	}
+
+	/* 
+	** advance head counter behind descriptor needed for this frame, 
+	** so that needed descriptor is reserved from that on. The next
+	** action will be to add the passed buffer to the TX-descriptor
+	*/
+	pTxd = pTxPort->pTxdRingHead;
+	pTxPort->pTxdRingHead = pTxd->pNextTxd;
+	pTxPort->TxdRingFree--;
+
+#ifdef SK_DUMP_TX
+	DumpMsg(pMessage, "XmitFrame");
+#endif
+
+	/* 
+	** First step is to map the data to be sent via the adapter onto
+	** the DMA memory. Kernel 2.2 uses virt_to_bus(), but kernels 2.4
+	** and 2.6 need to use pci_map_page() for that mapping.
+	*/
+	PhysAddr = (SK_U64) pci_map_page(pAC->PciDev,
+					virt_to_page(pMessage->data),
+					((unsigned long) pMessage->data & ~PAGE_MASK),
+					pMessage->len,
+					PCI_DMA_TODEVICE);
+	pTxd->VDataLow  = (SK_U32) (PhysAddr & 0xffffffff);
+	pTxd->VDataHigh = (SK_U32) (PhysAddr >> 32);
+	pTxd->pMBuf     = pMessage;
+
+	if (pMessage->ip_summed == CHECKSUM_PARTIAL) {
+		u16 hdrlen = skb_transport_offset(pMessage);
+		u16 offset = hdrlen + pMessage->csum_offset;
+
+		if ((ipip_hdr(pMessage)->protocol == IPPROTO_UDP) &&
+			(pAC->GIni.GIChipRev == 0) &&
+			(pAC->GIni.GIChipId == CHIP_ID_YUKON)) {
+			pTxd->TBControl = BMU_TCP_CHECK;
+		} else {
+			pTxd->TBControl = BMU_UDP_CHECK;
+		}
+
+		pTxd->TcpSumOfs = 0;
+		pTxd->TcpSumSt  = hdrlen;
+		pTxd->TcpSumWr  = offset;
+
+		pTxd->TBControl |= BMU_OWN | BMU_STF | 
+				   BMU_SW  | BMU_EOF |
+#ifdef USE_TX_COMPLETE
+				   BMU_IRQ_EOF |
+#endif
+				   pMessage->len;
+        } else {
+		pTxd->TBControl = BMU_OWN | BMU_STF | BMU_CHECK | 
+				  BMU_SW  | BMU_EOF |
+#ifdef USE_TX_COMPLETE
+				   BMU_IRQ_EOF |
+#endif
+			pMessage->len;
+	}
+
+	/* 
+	** If previous descriptor already done, give TX start cmd 
+	*/
+	pOldTxd = xchg(&pTxPort->pTxdRingPrev, pTxd);
+	if ((pOldTxd->TBControl & BMU_OWN) == 0) {
+		SK_OUT8(pTxPort->HwAddr, Q_CSR, CSR_START);
+	}	
+
+	/* 
+	** after releasing the lock, the skb may immediately be free'd 
+	*/
+	spin_unlock_irqrestore(&pTxPort->TxDesRingLock, Flags);
+	if (pTxPort->TxdRingFree != 0) {
+		return (BytesSend);
+	} else {
+		return (0);
+	}
+
+} /* XmitFrame */
+
+/*****************************************************************************
+ *
+ * 	XmitFrameSG - fill one socket buffer into the transmit ring
+ *                (use SG and TCP/UDP hardware checksumming)
+ *
+ * Description:
+ *	This function puts a message into the transmit descriptor ring
+ *	if there is a descriptors left.
+ *
+ * Returns:
+ *	> 0 - on succes: the number of bytes in the message
+ *	= 0 - on resource shortage: this frame sent or dropped, now
+ *		the ring is full ( -> set tbusy)
+ *	< 0 - on failure: other problems ( -> return failure to upper layers)
+ */
+static int XmitFrameSG(
+SK_AC 		*pAC,		/* pointer to adapter context           */
+TX_PORT		*pTxPort,	/* pointer to struct of port to send to */
+struct sk_buff	*pMessage)	/* pointer to send-message              */
+{
+
+	TXD		*pTxd;
+	TXD		*pTxdFst;
+	TXD		*pTxdLst;
+	int 	 	 CurrFrag;
+	int		 BytesSend;
+	skb_frag_t	*sk_frag;
+	SK_U64		 PhysAddr;
+	unsigned long	 Flags;
+	SK_U32		 Control;
+
+	spin_lock_irqsave(&pTxPort->TxDesRingLock, Flags);
+#ifndef USE_TX_COMPLETE
+	FreeTxDescriptors(pAC, pTxPort);
+#endif
+	if ((skb_shinfo(pMessage)->nr_frags +1) > pTxPort->TxdRingFree) {
+		FreeTxDescriptors(pAC, pTxPort);
+		if ((skb_shinfo(pMessage)->nr_frags + 1) > pTxPort->TxdRingFree) {
+			spin_unlock_irqrestore(&pTxPort->TxDesRingLock, Flags);
+			SK_PNMI_CNT_NO_TX_BUF(pAC, pTxPort->PortIndex);
+			SK_DBG_MSG(NULL, SK_DBGMOD_DRV,
+				SK_DBGCAT_DRV_TX_PROGRESS,
+				("XmitFrameSG failed - Ring full\n"));
+				/* this message can not be sent now */
+			return(-1);
+		}
+	}
+
+	pTxd      = pTxPort->pTxdRingHead;
+	pTxdFst   = pTxd;
+	pTxdLst   = pTxd;
+	BytesSend = 0;
+
+	/* 
+	** Map the first fragment (header) into the DMA-space
+	*/
+	PhysAddr = (SK_U64) pci_map_page(pAC->PciDev,
+			virt_to_page(pMessage->data),
+			((unsigned long) pMessage->data & ~PAGE_MASK),
+			skb_headlen(pMessage),
+			PCI_DMA_TODEVICE);
+
+	pTxd->VDataLow  = (SK_U32) (PhysAddr & 0xffffffff);
+	pTxd->VDataHigh = (SK_U32) (PhysAddr >> 32);
+
+	/* 
+	** Does the HW need to evaluate checksum for TCP or UDP packets? 
+	*/
+	if (pMessage->ip_summed == CHECKSUM_PARTIAL) {
+		u16 hdrlen = skb_transport_offset(pMessage);
+		u16 offset = hdrlen + pMessage->csum_offset;
+
+		Control = BMU_STFWD;
+
+		/* 
+		** We have to use the opcode for tcp here,  because the
+		** opcode for udp is not working in the hardware yet 
+		** (Revision 2.0)
+		*/
+		if ((ipip_hdr(pMessage)->protocol == IPPROTO_UDP) &&
+			(pAC->GIni.GIChipRev == 0) &&
+			(pAC->GIni.GIChipId == CHIP_ID_YUKON)) {
+			Control |= BMU_TCP_CHECK;
+		} else {
+			Control |= BMU_UDP_CHECK;
+		}
+
+		pTxd->TcpSumOfs = 0;
+		pTxd->TcpSumSt  = hdrlen;
+		pTxd->TcpSumWr  = offset;
+	} else
+		Control = BMU_CHECK | BMU_SW;
+
+	pTxd->TBControl = BMU_STF | Control | skb_headlen(pMessage);
+
+	pTxd = pTxd->pNextTxd;
+	pTxPort->TxdRingFree--;
+	BytesSend += skb_headlen(pMessage);
+
+	/* 
+	** Browse over all SG fragments and map each of them into the DMA space
+	*/
+	for (CurrFrag = 0; CurrFrag < skb_shinfo(pMessage)->nr_frags; CurrFrag++) {
+		sk_frag = &skb_shinfo(pMessage)->frags[CurrFrag];
+		/* 
+		** we already have the proper value in entry
+		*/
+		PhysAddr = (SK_U64) pci_map_page(pAC->PciDev,
+						 sk_frag->page,
+						 sk_frag->page_offset,
+						 sk_frag->size,
+						 PCI_DMA_TODEVICE);
+
+		pTxd->VDataLow  = (SK_U32) (PhysAddr & 0xffffffff);
+		pTxd->VDataHigh = (SK_U32) (PhysAddr >> 32);
+		pTxd->pMBuf     = pMessage;
+		
+		pTxd->TBControl = Control | BMU_OWN | sk_frag->size;
+
+		/* 
+		** Do we have the last fragment? 
+		*/
+		if( (CurrFrag+1) == skb_shinfo(pMessage)->nr_frags )  {
+#ifdef USE_TX_COMPLETE
+			pTxd->TBControl |= BMU_EOF | BMU_IRQ_EOF;
+#else
+			pTxd->TBControl |= BMU_EOF;
+#endif
+			pTxdFst->TBControl |= BMU_OWN | BMU_SW;
+		}
+		pTxdLst = pTxd;
+		pTxd    = pTxd->pNextTxd;
+		pTxPort->TxdRingFree--;
+		BytesSend += sk_frag->size;
+	}
+
+	/* 
+	** If previous descriptor already done, give TX start cmd 
+	*/
+	if ((pTxPort->pTxdRingPrev->TBControl & BMU_OWN) == 0) {
+		SK_OUT8(pTxPort->HwAddr, Q_CSR, CSR_START);
+	}
+
+	pTxPort->pTxdRingPrev = pTxdLst;
+	pTxPort->pTxdRingHead = pTxd;
+
+	spin_unlock_irqrestore(&pTxPort->TxDesRingLock, Flags);
+
+	if (pTxPort->TxdRingFree > 0) {
+		return (BytesSend);
+	} else {
+		return (0);
+	}
+}
+
+/*****************************************************************************
+ *
+ * 	FreeTxDescriptors - release descriptors from the descriptor ring
+ *
+ * Description:
+ *	This function releases descriptors from a transmit ring if they
+ *	have been sent by the BMU.
+ *	If a descriptors is sent, it can be freed and the message can
+ *	be freed, too.
+ *	The SOFTWARE controllable bit is used to prevent running around a
+ *	completely free ring for ever. If this bit is no set in the
+ *	frame (by XmitFrame), this frame has never been sent or is
+ *	already freed.
+ *	The Tx descriptor ring lock must be held while calling this function !!!
+ *
+ * Returns:
+ *	none
+ */
+static void FreeTxDescriptors(
+SK_AC	*pAC,		/* pointer to the adapter context */
+TX_PORT	*pTxPort)	/* pointer to destination port structure */
+{
+TXD	*pTxd;		/* pointer to the checked descriptor */
+TXD	*pNewTail;	/* pointer to 'end' of the ring */
+SK_U32	Control;	/* TBControl field of descriptor */
+SK_U64	PhysAddr;	/* address of DMA mapping */
+
+	pNewTail = pTxPort->pTxdRingTail;
+	pTxd     = pNewTail;
+	/*
+	** loop forever; exits if BMU_SW bit not set in start frame
+	** or BMU_OWN bit set in any frame
+	*/
+	while (1) {
+		Control = pTxd->TBControl;
+		if ((Control & BMU_SW) == 0) {
+			/*
+			** software controllable bit is set in first
+			** fragment when given to BMU. Not set means that
+			** this fragment was never sent or is already
+			** freed ( -> ring completely free now).
+			*/
+			pTxPort->pTxdRingTail = pTxd;
+			netif_wake_queue(pAC->dev[pTxPort->PortIndex]);
+			return;
+		}
+		if (Control & BMU_OWN) {
+			pTxPort->pTxdRingTail = pTxd;
+			if (pTxPort->TxdRingFree > 0) {
+				netif_wake_queue(pAC->dev[pTxPort->PortIndex]);
+			}
+			return;
+		}
+		
+		/* 
+		** release the DMA mapping, because until not unmapped
+		** this buffer is considered being under control of the
+		** adapter card!
+		*/
+		PhysAddr = ((SK_U64) pTxd->VDataHigh) << (SK_U64) 32;
+		PhysAddr |= (SK_U64) pTxd->VDataLow;
+		pci_unmap_page(pAC->PciDev, PhysAddr,
+				 pTxd->pMBuf->len,
+				 PCI_DMA_TODEVICE);
+
+		if (Control & BMU_EOF)
+			DEV_KFREE_SKB_ANY(pTxd->pMBuf);	/* free message */
+
+		pTxPort->TxdRingFree++;
+		pTxd->TBControl &= ~BMU_SW;
+		pTxd = pTxd->pNextTxd; /* point behind fragment with EOF */
+	} /* while(forever) */
+} /* FreeTxDescriptors */
+
+/*****************************************************************************
+ *
+ * 	FillRxRing - fill the receive ring with valid descriptors
+ *
+ * Description:
+ *	This function fills the receive ring descriptors with data
+ *	segments and makes them valid for the BMU.
+ *	The active ring is filled completely, if possible.
+ *	The non-active ring is filled only partial to save memory.
+ *
+ * Description of rx ring structure:
+ *	head - points to the descriptor which will be used next by the BMU
+ *	tail - points to the next descriptor to give to the BMU
+ *	
+ * Returns:	N/A
+ */
+static void FillRxRing(
+SK_AC		*pAC,		/* pointer to the adapter context */
+RX_PORT		*pRxPort)	/* ptr to port struct for which the ring
+				   should be filled */
+{
+unsigned long	Flags;
+
+	spin_lock_irqsave(&pRxPort->RxDesRingLock, Flags);
+	while (pRxPort->RxdRingFree > pRxPort->RxFillLimit) {
+		if(!FillRxDescriptor(pAC, pRxPort))
+			break;
+	}
+	spin_unlock_irqrestore(&pRxPort->RxDesRingLock, Flags);
+} /* FillRxRing */
+
+
+/*****************************************************************************
+ *
+ * 	FillRxDescriptor - fill one buffer into the receive ring
+ *
+ * Description:
+ *	The function allocates a new receive buffer and
+ *	puts it into the next descriptor.
+ *
+ * Returns:
+ *	SK_TRUE - a buffer was added to the ring
+ *	SK_FALSE - a buffer could not be added
+ */
+static SK_BOOL FillRxDescriptor(
+SK_AC		*pAC,		/* pointer to the adapter context struct */
+RX_PORT		*pRxPort)	/* ptr to port struct of ring to fill */
+{
+struct sk_buff	*pMsgBlock;	/* pointer to a new message block */
+RXD		*pRxd;		/* the rxd to fill */
+SK_U16		Length;		/* data fragment length */
+SK_U64		PhysAddr;	/* physical address of a rx buffer */
+
+	pMsgBlock = alloc_skb(pAC->RxBufSize, GFP_ATOMIC);
+	if (pMsgBlock == NULL) {
+		SK_DBG_MSG(NULL, SK_DBGMOD_DRV,
+			SK_DBGCAT_DRV_ENTRY,
+			("%s: Allocation of rx buffer failed !\n",
+			pAC->dev[pRxPort->PortIndex]->name));
+		SK_PNMI_CNT_NO_RX_BUF(pAC, pRxPort->PortIndex);
+		return(SK_FALSE);
+	}
+	skb_reserve(pMsgBlock, 2); /* to align IP frames */
+	/* skb allocated ok, so add buffer */
+	pRxd = pRxPort->pRxdRingTail;
+	pRxPort->pRxdRingTail = pRxd->pNextRxd;
+	pRxPort->RxdRingFree--;
+	Length = pAC->RxBufSize;
+	PhysAddr = (SK_U64) pci_map_page(pAC->PciDev,
+		virt_to_page(pMsgBlock->data),
+		((unsigned long) pMsgBlock->data &
+		~PAGE_MASK),
+		pAC->RxBufSize - 2,
+		PCI_DMA_FROMDEVICE);
+
+	pRxd->VDataLow  = (SK_U32) (PhysAddr & 0xffffffff);
+	pRxd->VDataHigh = (SK_U32) (PhysAddr >> 32);
+	pRxd->pMBuf     = pMsgBlock;
+	pRxd->RBControl = BMU_OWN       | 
+			  BMU_STF       | 
+			  BMU_IRQ_EOF   | 
+			  BMU_TCP_CHECK | 
+			  Length;
+	return (SK_TRUE);
+
+} /* FillRxDescriptor */
+
+
+/*****************************************************************************
+ *
+ * 	ReQueueRxBuffer - fill one buffer back into the receive ring
+ *
+ * Description:
+ *	Fill a given buffer back into the rx ring. The buffer
+ *	has been previously allocated and aligned, and its phys.
+ *	address calculated, so this is no more necessary.
+ *
+ * Returns: N/A
+ */
+static void ReQueueRxBuffer(
+SK_AC		*pAC,		/* pointer to the adapter context struct */
+RX_PORT		*pRxPort,	/* ptr to port struct of ring to fill */
+struct sk_buff	*pMsg,		/* pointer to the buffer */
+SK_U32		PhysHigh,	/* phys address high dword */
+SK_U32		PhysLow)	/* phys address low dword */
+{
+RXD		*pRxd;		/* the rxd to fill */
+SK_U16		Length;		/* data fragment length */
+
+	pRxd = pRxPort->pRxdRingTail;
+	pRxPort->pRxdRingTail = pRxd->pNextRxd;
+	pRxPort->RxdRingFree--;
+	Length = pAC->RxBufSize;
+
+	pRxd->VDataLow  = PhysLow;
+	pRxd->VDataHigh = PhysHigh;
+	pRxd->pMBuf     = pMsg;
+	pRxd->RBControl = BMU_OWN       | 
+			  BMU_STF       |
+			  BMU_IRQ_EOF   | 
+			  BMU_TCP_CHECK | 
+			  Length;
+	return;
+} /* ReQueueRxBuffer */
+
+/*****************************************************************************
+ *
+ * 	ReceiveIrq - handle a receive IRQ
+ *
+ * Description:
+ *	This function is called when a receive IRQ is set.
+ *	It walks the receive descriptor ring and sends up all
+ *	frames that are complete.
+ *
+ * Returns:	N/A
+ */
+static void ReceiveIrq(
+	SK_AC		*pAC,			/* pointer to adapter context */
+	RX_PORT		*pRxPort,		/* pointer to receive port struct */
+	SK_BOOL		SlowPathLock)	/* indicates if SlowPathLock is needed */
+{
+RXD				*pRxd;			/* pointer to receive descriptors */
+SK_U32			Control;		/* control field of descriptor */
+struct sk_buff	*pMsg;			/* pointer to message holding frame */
+struct sk_buff	*pNewMsg;		/* pointer to a new message for copying frame */
+int				FrameLength;	/* total length of received frame */
+SK_MBUF			*pRlmtMbuf;		/* ptr to a buffer for giving a frame to rlmt */
+SK_EVPARA		EvPara;			/* an event parameter union */	
+unsigned long	Flags;			/* for spin lock */
+int				PortIndex = pRxPort->PortIndex;
+unsigned int	Offset;
+unsigned int	NumBytes;
+unsigned int	ForRlmt;
+SK_BOOL			IsBc;
+SK_BOOL			IsMc;
+SK_BOOL  IsBadFrame; 			/* Bad frame */
+
+SK_U32			FrameStat;
+SK_U64			PhysAddr;
+
+rx_start:	
+	/* do forever; exit if BMU_OWN found */
+	for ( pRxd = pRxPort->pRxdRingHead ;
+		  pRxPort->RxdRingFree < pAC->RxDescrPerRing ;
+		  pRxd = pRxd->pNextRxd,
+		  pRxPort->pRxdRingHead = pRxd,
+		  pRxPort->RxdRingFree ++) {
+
+		/*
+		 * For a better understanding of this loop
+		 * Go through every descriptor beginning at the head
+		 * Please note: the ring might be completely received so the OWN bit
+		 * set is not a good crirteria to leave that loop.
+		 * Therefore the RingFree counter is used.
+		 * On entry of this loop pRxd is a pointer to the Rxd that needs
+		 * to be checked next.
+		 */
+
+		Control = pRxd->RBControl;
+	
+		/* check if this descriptor is ready */
+		if ((Control & BMU_OWN) != 0) {
+			/* this descriptor is not yet ready */
+			/* This is the usual end of the loop */
+			/* We don't need to start the ring again */
+			FillRxRing(pAC, pRxPort);
+			return;
+		}
+                pAC->DynIrqModInfo.NbrProcessedDescr++;
+
+		/* get length of frame and check it */
+		FrameLength = Control & BMU_BBC;
+		if (FrameLength > pAC->RxBufSize) {
+			goto rx_failed;
+		}
+
+		/* check for STF and EOF */
+		if ((Control & (BMU_STF | BMU_EOF)) != (BMU_STF | BMU_EOF)) {
+			goto rx_failed;
+		}
+
+		/* here we have a complete frame in the ring */
+		pMsg = pRxd->pMBuf;
+
+		FrameStat = pRxd->FrameStat;
+
+		/* check for frame length mismatch */
+#define XMR_FS_LEN_SHIFT        18
+#define GMR_FS_LEN_SHIFT        16
+		if (pAC->GIni.GIChipId == CHIP_ID_GENESIS) {
+			if (FrameLength != (SK_U32) (FrameStat >> XMR_FS_LEN_SHIFT)) {
+				SK_DBG_MSG(NULL, SK_DBGMOD_DRV,
+					SK_DBGCAT_DRV_RX_PROGRESS,
+					("skge: Frame length mismatch (%u/%u).\n",
+					FrameLength,
+					(SK_U32) (FrameStat >> XMR_FS_LEN_SHIFT)));
+				goto rx_failed;
+			}
+		}
+		else {
+			if (FrameLength != (SK_U32) (FrameStat >> GMR_FS_LEN_SHIFT)) {
+				SK_DBG_MSG(NULL, SK_DBGMOD_DRV,
+					SK_DBGCAT_DRV_RX_PROGRESS,
+					("skge: Frame length mismatch (%u/%u).\n",
+					FrameLength,
+					(SK_U32) (FrameStat >> XMR_FS_LEN_SHIFT)));
+				goto rx_failed;
+			}
+		}
+
+		/* Set Rx Status */
+		if (pAC->GIni.GIChipId == CHIP_ID_GENESIS) {
+			IsBc = (FrameStat & XMR_FS_BC) != 0;
+			IsMc = (FrameStat & XMR_FS_MC) != 0;
+			IsBadFrame = (FrameStat &
+				(XMR_FS_ANY_ERR | XMR_FS_2L_VLAN)) != 0;
+		} else {
+			IsBc = (FrameStat & GMR_FS_BC) != 0;
+			IsMc = (FrameStat & GMR_FS_MC) != 0;
+			IsBadFrame = (((FrameStat & GMR_FS_ANY_ERR) != 0) ||
+							((FrameStat & GMR_FS_RX_OK) == 0));
+		}
+
+		SK_DBG_MSG(NULL, SK_DBGMOD_DRV, 0,
+			("Received frame of length %d on port %d\n",
+			FrameLength, PortIndex));
+		SK_DBG_MSG(NULL, SK_DBGMOD_DRV, 0,
+			("Number of free rx descriptors: %d\n",
+			pRxPort->RxdRingFree));
+/* DumpMsg(pMsg, "Rx");	*/
+
+		if ((Control & BMU_STAT_VAL) != BMU_STAT_VAL || (IsBadFrame)) {
+#if 0
+			(FrameStat & (XMR_FS_ANY_ERR | XMR_FS_2L_VLAN)) != 0) {
+#endif
+			/* there is a receive error in this frame */
+			SK_DBG_MSG(NULL, SK_DBGMOD_DRV,
+				SK_DBGCAT_DRV_RX_PROGRESS,
+				("skge: Error in received frame, dropped!\n"
+				"Control: %x\nRxStat: %x\n",
+				Control, FrameStat));
+
+			ReQueueRxBuffer(pAC, pRxPort, pMsg,
+				pRxd->VDataHigh, pRxd->VDataLow);
+
+			continue;
+		}
+
+		/*
+		 * if short frame then copy data to reduce memory waste
+		 */
+		if ((FrameLength < SK_COPY_THRESHOLD) &&
+			((pNewMsg = alloc_skb(FrameLength+2, GFP_ATOMIC)) != NULL)) {
+			/*
+			 * Short frame detected and allocation successfull
+			 */
+			/* use new skb and copy data */
+			skb_reserve(pNewMsg, 2);
+			skb_put(pNewMsg, FrameLength);
+			PhysAddr = ((SK_U64) pRxd->VDataHigh) << (SK_U64)32;
+			PhysAddr |= (SK_U64) pRxd->VDataLow;
+
+			pci_dma_sync_single_for_cpu(pAC->PciDev,
+						    (dma_addr_t) PhysAddr,
+						    FrameLength,
+						    PCI_DMA_FROMDEVICE);
+			skb_copy_to_linear_data(pNewMsg, pMsg, FrameLength);
+
+			pci_dma_sync_single_for_device(pAC->PciDev,
+						       (dma_addr_t) PhysAddr,
+						       FrameLength,
+						       PCI_DMA_FROMDEVICE);
+			ReQueueRxBuffer(pAC, pRxPort, pMsg,
+				pRxd->VDataHigh, pRxd->VDataLow);
+
+			pMsg = pNewMsg;
+
+		}
+		else {
+			/*
+			 * if large frame, or SKB allocation failed, pass
+			 * the SKB directly to the networking
+			 */
+
+			PhysAddr = ((SK_U64) pRxd->VDataHigh) << (SK_U64)32;
+			PhysAddr |= (SK_U64) pRxd->VDataLow;
+
+			/* release the DMA mapping */
+			pci_unmap_single(pAC->PciDev,
+					 PhysAddr,
+					 pAC->RxBufSize - 2,
+					 PCI_DMA_FROMDEVICE);
+
+			/* set length in message */
+			skb_put(pMsg, FrameLength);
+		} /* frame > SK_COPY_TRESHOLD */
+
+#ifdef USE_SK_RX_CHECKSUM
+		pMsg->csum = pRxd->TcpSums & 0xffff;
+		pMsg->ip_summed = CHECKSUM_COMPLETE;
+#else
+		pMsg->ip_summed = CHECKSUM_NONE;
+#endif
+
+		SK_DBG_MSG(NULL, SK_DBGMOD_DRV,	1,("V"));
+		ForRlmt = SK_RLMT_RX_PROTOCOL;
+#if 0
+		IsBc = (FrameStat & XMR_FS_BC)==XMR_FS_BC;
+#endif
+		SK_RLMT_PRE_LOOKAHEAD(pAC, PortIndex, FrameLength,
+			IsBc, &Offset, &NumBytes);
+		if (NumBytes != 0) {
+#if 0
+			IsMc = (FrameStat & XMR_FS_MC)==XMR_FS_MC;
+#endif
+			SK_RLMT_LOOKAHEAD(pAC, PortIndex,
+				&pMsg->data[Offset],
+				IsBc, IsMc, &ForRlmt);
+		}
+		if (ForRlmt == SK_RLMT_RX_PROTOCOL) {
+					SK_DBG_MSG(NULL, SK_DBGMOD_DRV,	1,("W"));
+			/* send up only frames from active port */
+			if ((PortIndex == pAC->ActivePort) ||
+				(pAC->RlmtNets == 2)) {
+				/* frame for upper layer */
+				SK_DBG_MSG(NULL, SK_DBGMOD_DRV, 1,("U"));
+#ifdef xDEBUG
+				DumpMsg(pMsg, "Rx");
+#endif
+				SK_PNMI_CNT_RX_OCTETS_DELIVERED(pAC,
+					FrameLength, pRxPort->PortIndex);
+
+				pMsg->protocol = eth_type_trans(pMsg,
+					pAC->dev[pRxPort->PortIndex]);
+				netif_rx(pMsg);
+				pAC->dev[pRxPort->PortIndex]->last_rx = jiffies;
+			}
+			else {
+				/* drop frame */
+				SK_DBG_MSG(NULL, SK_DBGMOD_DRV,
+					SK_DBGCAT_DRV_RX_PROGRESS,
+					("D"));
+				DEV_KFREE_SKB(pMsg);
+			}
+			
+		} /* if not for rlmt */
+		else {
+			/* packet for rlmt */
+			SK_DBG_MSG(NULL, SK_DBGMOD_DRV,
+				SK_DBGCAT_DRV_RX_PROGRESS, ("R"));
+			pRlmtMbuf = SkDrvAllocRlmtMbuf(pAC,
+				pAC->IoBase, FrameLength);
+			if (pRlmtMbuf != NULL) {
+				pRlmtMbuf->pNext = NULL;
+				pRlmtMbuf->Length = FrameLength;
+				pRlmtMbuf->PortIdx = PortIndex;
+				EvPara.pParaPtr = pRlmtMbuf;
+				memcpy((char*)(pRlmtMbuf->pData),
+					   (char*)(pMsg->data),
+					   FrameLength);
+
+				/* SlowPathLock needed? */
+				if (SlowPathLock == SK_TRUE) {
+					spin_lock_irqsave(&pAC->SlowPathLock, Flags);
+					SkEventQueue(pAC, SKGE_RLMT,
+						SK_RLMT_PACKET_RECEIVED,
+						EvPara);
+					pAC->CheckQueue = SK_TRUE;
+					spin_unlock_irqrestore(&pAC->SlowPathLock, Flags);
+				} else {
+					SkEventQueue(pAC, SKGE_RLMT,
+						SK_RLMT_PACKET_RECEIVED,
+						EvPara);
+					pAC->CheckQueue = SK_TRUE;
+				}
+
+				SK_DBG_MSG(NULL, SK_DBGMOD_DRV,
+					SK_DBGCAT_DRV_RX_PROGRESS,
+					("Q"));
+			}
+			if ((pAC->dev[pRxPort->PortIndex]->flags &
+				(IFF_PROMISC | IFF_ALLMULTI)) != 0 ||
+				(ForRlmt & SK_RLMT_RX_PROTOCOL) ==
+				SK_RLMT_RX_PROTOCOL) {
+				pMsg->protocol = eth_type_trans(pMsg,
+					pAC->dev[pRxPort->PortIndex]);
+				netif_rx(pMsg);
+				pAC->dev[pRxPort->PortIndex]->last_rx = jiffies;
+			}
+			else {
+				DEV_KFREE_SKB(pMsg);
+			}
+
+		} /* if packet for rlmt */
+	} /* for ... scanning the RXD ring */
+
+	/* RXD ring is empty -> fill and restart */
+	FillRxRing(pAC, pRxPort);
+	/* do not start if called from Close */
+	if (pAC->BoardLevel > SK_INIT_DATA) {
+		ClearAndStartRx(pAC, PortIndex);
+	}
+	return;
+
+rx_failed:
+	/* remove error frame */
+	SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ERROR,
+		("Schrottdescriptor, length: 0x%x\n", FrameLength));
+
+	/* release the DMA mapping */
+
+	PhysAddr = ((SK_U64) pRxd->VDataHigh) << (SK_U64)32;
+	PhysAddr |= (SK_U64) pRxd->VDataLow;
+	pci_unmap_page(pAC->PciDev,
+			 PhysAddr,
+			 pAC->RxBufSize - 2,
+			 PCI_DMA_FROMDEVICE);
+	DEV_KFREE_SKB_IRQ(pRxd->pMBuf);
+	pRxd->pMBuf = NULL;
+	pRxPort->RxdRingFree++;
+	pRxPort->pRxdRingHead = pRxd->pNextRxd;
+	goto rx_start;
+
+} /* ReceiveIrq */
+
+
+/*****************************************************************************
+ *
+ * 	ClearAndStartRx - give a start receive command to BMU, clear IRQ
+ *
+ * Description:
+ *	This function sends a start command and a clear interrupt
+ *	command for one receive queue to the BMU.
+ *
+ * Returns: N/A
+ *	none
+ */
+static void ClearAndStartRx(
+SK_AC	*pAC,		/* pointer to the adapter context */
+int	PortIndex)	/* index of the receive port (XMAC) */
+{
+	SK_OUT8(pAC->IoBase,
+		RxQueueAddr[PortIndex]+Q_CSR,
+		CSR_START | CSR_IRQ_CL_F);
+} /* ClearAndStartRx */
+
+
+/*****************************************************************************
+ *
+ * 	ClearTxIrq - give a clear transmit IRQ command to BMU
+ *
+ * Description:
+ *	This function sends a clear tx IRQ command for one
+ *	transmit queue to the BMU.
+ *
+ * Returns: N/A
+ */
+static void ClearTxIrq(
+SK_AC	*pAC,		/* pointer to the adapter context */
+int	PortIndex,	/* index of the transmit port (XMAC) */
+int	Prio)		/* priority or normal queue */
+{
+	SK_OUT8(pAC->IoBase, 
+		TxQueueAddr[PortIndex][Prio]+Q_CSR,
+		CSR_IRQ_CL_F);
+} /* ClearTxIrq */
+
+
+/*****************************************************************************
+ *
+ * 	ClearRxRing - remove all buffers from the receive ring
+ *
+ * Description:
+ *	This function removes all receive buffers from the ring.
+ *	The receive BMU must be stopped before calling this function.
+ *
+ * Returns: N/A
+ */
+static void ClearRxRing(
+SK_AC	*pAC,		/* pointer to adapter context */
+RX_PORT	*pRxPort)	/* pointer to rx port struct */
+{
+RXD		*pRxd;	/* pointer to the current descriptor */
+unsigned long	Flags;
+SK_U64		PhysAddr;
+
+	if (pRxPort->RxdRingFree == pAC->RxDescrPerRing) {
+		return;
+	}
+	spin_lock_irqsave(&pRxPort->RxDesRingLock, Flags);
+	pRxd = pRxPort->pRxdRingHead;
+	do {
+		if (pRxd->pMBuf != NULL) {
+
+			PhysAddr = ((SK_U64) pRxd->VDataHigh) << (SK_U64)32;
+			PhysAddr |= (SK_U64) pRxd->VDataLow;
+			pci_unmap_page(pAC->PciDev,
+					 PhysAddr,
+					 pAC->RxBufSize - 2,
+					 PCI_DMA_FROMDEVICE);
+			DEV_KFREE_SKB(pRxd->pMBuf);
+			pRxd->pMBuf = NULL;
+		}
+		pRxd->RBControl &= BMU_OWN;
+		pRxd = pRxd->pNextRxd;
+		pRxPort->RxdRingFree++;
+	} while (pRxd != pRxPort->pRxdRingTail);
+	pRxPort->pRxdRingTail = pRxPort->pRxdRingHead;
+	spin_unlock_irqrestore(&pRxPort->RxDesRingLock, Flags);
+} /* ClearRxRing */
+
+/*****************************************************************************
+ *
+ *	ClearTxRing - remove all buffers from the transmit ring
+ *
+ * Description:
+ *	This function removes all transmit buffers from the ring.
+ *	The transmit BMU must be stopped before calling this function
+ *	and transmitting at the upper level must be disabled.
+ *	The BMU own bit of all descriptors is cleared, the rest is
+ *	done by calling FreeTxDescriptors.
+ *
+ * Returns: N/A
+ */
+static void ClearTxRing(
+SK_AC	*pAC,		/* pointer to adapter context */
+TX_PORT	*pTxPort)	/* pointer to tx prt struct */
+{
+TXD		*pTxd;		/* pointer to the current descriptor */
+int		i;
+unsigned long	Flags;
+
+	spin_lock_irqsave(&pTxPort->TxDesRingLock, Flags);
+	pTxd = pTxPort->pTxdRingHead;
+	for (i=0; i<pAC->TxDescrPerRing; i++) {
+		pTxd->TBControl &= ~BMU_OWN;
+		pTxd = pTxd->pNextTxd;
+	}
+	FreeTxDescriptors(pAC, pTxPort);
+	spin_unlock_irqrestore(&pTxPort->TxDesRingLock, Flags);
+} /* ClearTxRing */
+
+/*****************************************************************************
+ *
+ * 	SkGeSetMacAddr - Set the hardware MAC address
+ *
+ * Description:
+ *	This function sets the MAC address used by the adapter.
+ *
+ * Returns:
+ *	0, if everything is ok
+ *	!=0, on error
+ */
+static int SkGeSetMacAddr(struct SK_NET_DEVICE *dev, void *p)
+{
+
+DEV_NET *pNet = netdev_priv(dev);
+SK_AC	*pAC = pNet->pAC;
+
+struct sockaddr	*addr = p;
+unsigned long	Flags;
+	
+	SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY,
+		("SkGeSetMacAddr starts now...\n"));
+	if(netif_running(dev))
+		return -EBUSY;
+
+	memcpy(dev->dev_addr, addr->sa_data,dev->addr_len);
+	
+	spin_lock_irqsave(&pAC->SlowPathLock, Flags);
+
+	if (pAC->RlmtNets == 2)
+		SkAddrOverride(pAC, pAC->IoBase, pNet->NetNr,
+			(SK_MAC_ADDR*)dev->dev_addr, SK_ADDR_VIRTUAL_ADDRESS);
+	else
+		SkAddrOverride(pAC, pAC->IoBase, pAC->ActivePort,
+			(SK_MAC_ADDR*)dev->dev_addr, SK_ADDR_VIRTUAL_ADDRESS);
+
+	
+	
+	spin_unlock_irqrestore(&pAC->SlowPathLock, Flags);
+	return 0;
+} /* SkGeSetMacAddr */
+
+
+/*****************************************************************************
+ *
+ * 	SkGeSetRxMode - set receive mode
+ *
+ * Description:
+ *	This function sets the receive mode of an adapter. The adapter
+ *	supports promiscuous mode, allmulticast mode and a number of
+ *	multicast addresses. If more multicast addresses the available
+ *	are selected, a hash function in the hardware is used.
+ *
+ * Returns:
+ *	0, if everything is ok
+ *	!=0, on error
+ */
+static void SkGeSetRxMode(struct SK_NET_DEVICE *dev)
+{
+
+DEV_NET		*pNet;
+SK_AC		*pAC;
+
+struct dev_mc_list	*pMcList;
+int			i;
+int			PortIdx;
+unsigned long		Flags;
+
+	SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY,
+		("SkGeSetRxMode starts now... "));
+
+	pNet = netdev_priv(dev);
+	pAC = pNet->pAC;
+	if (pAC->RlmtNets == 1)
+		PortIdx = pAC->ActivePort;
+	else
+		PortIdx = pNet->NetNr;
+
+	spin_lock_irqsave(&pAC->SlowPathLock, Flags);
+	if (dev->flags & IFF_PROMISC) {
+		SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY,
+			("PROMISCUOUS mode\n"));
+		SkAddrPromiscuousChange(pAC, pAC->IoBase, PortIdx,
+			SK_PROM_MODE_LLC);
+	} else if (dev->flags & IFF_ALLMULTI) {
+		SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY,
+			("ALLMULTI mode\n"));
+		SkAddrPromiscuousChange(pAC, pAC->IoBase, PortIdx,
+			SK_PROM_MODE_ALL_MC);
+	} else {
+		SkAddrPromiscuousChange(pAC, pAC->IoBase, PortIdx,
+			SK_PROM_MODE_NONE);
+		SkAddrMcClear(pAC, pAC->IoBase, PortIdx, 0);
+
+		SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY,
+			("Number of MC entries: %d ", dev->mc_count));
+		
+		pMcList = dev->mc_list;
+		for (i=0; i<dev->mc_count; i++, pMcList = pMcList->next) {
+			SkAddrMcAdd(pAC, pAC->IoBase, PortIdx,
+				(SK_MAC_ADDR*)pMcList->dmi_addr, 0);
+			SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_MCA,
+				("%02x:%02x:%02x:%02x:%02x:%02x\n",
+				pMcList->dmi_addr[0],
+				pMcList->dmi_addr[1],
+				pMcList->dmi_addr[2],
+				pMcList->dmi_addr[3],
+				pMcList->dmi_addr[4],
+				pMcList->dmi_addr[5]));
+		}
+		SkAddrMcUpdate(pAC, pAC->IoBase, PortIdx);
+	}
+	spin_unlock_irqrestore(&pAC->SlowPathLock, Flags);
+	
+	return;
+} /* SkGeSetRxMode */
+
+
+/*****************************************************************************
+ *
+ * 	SkGeChangeMtu - set the MTU to another value
+ *
+ * Description:
+ *	This function sets is called whenever the MTU size is changed
+ *	(ifconfig mtu xxx dev ethX). If the MTU is bigger than standard
+ *	ethernet MTU size, long frame support is activated.
+ *
+ * Returns:
+ *	0, if everything is ok
+ *	!=0, on error
+ */
+static int SkGeChangeMtu(struct SK_NET_DEVICE *dev, int NewMtu)
+{
+DEV_NET		*pNet;
+struct net_device *pOtherDev;
+SK_AC		*pAC;
+unsigned long	Flags;
+int		i;
+SK_EVPARA 	EvPara;
+
+	SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY,
+		("SkGeChangeMtu starts now...\n"));
+
+	pNet = netdev_priv(dev);
+	pAC  = pNet->pAC;
+
+	if ((NewMtu < 68) || (NewMtu > SK_JUMBO_MTU)) {
+		return -EINVAL;
+	}
+
+	if(pAC->BoardLevel != SK_INIT_RUN) {
+		return -EINVAL;
+	}
+
+#ifdef SK_DIAG_SUPPORT
+	if (pAC->DiagModeActive == DIAG_ACTIVE) {
+		if (pAC->DiagFlowCtrl == SK_FALSE) {
+			return -1; /* still in use, deny any actions of MTU */
+		} else {
+			pAC->DiagFlowCtrl = SK_FALSE;
+		}
+	}
+#endif
+
+	pOtherDev = pAC->dev[1 - pNet->NetNr];
+
+	if ( netif_running(pOtherDev) && (pOtherDev->mtu > 1500)
+	     && (NewMtu <= 1500))
+		return 0;
+
+	pAC->RxBufSize = NewMtu + 32;
+	dev->mtu = NewMtu;
+
+	SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY,
+		("New MTU: %d\n", NewMtu));
+
+	/* 
+	** Prevent any reconfiguration while changing the MTU 
+	** by disabling any interrupts 
+	*/
+	SK_OUT32(pAC->IoBase, B0_IMSK, 0);
+	spin_lock_irqsave(&pAC->SlowPathLock, Flags);
+
+	/* 
+	** Notify RLMT that any ports are to be stopped
+	*/
+	EvPara.Para32[0] =  0;
+	EvPara.Para32[1] = -1;
+	if ((pAC->GIni.GIMacsFound == 2 ) && (pAC->RlmtNets == 2)) {
+		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_STOP, EvPara);
+		EvPara.Para32[0] =  1;
+		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_STOP, EvPara);
+	} else {
+		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_STOP, EvPara);
+	}
+
+	/*
+	** After calling the SkEventDispatcher(), RLMT is aware about
+	** the stopped ports -> configuration can take place!
+	*/
+	SkEventDispatcher(pAC, pAC->IoBase);
+
+	for (i=0; i<pAC->GIni.GIMacsFound; i++) {
+		spin_lock(&pAC->TxPort[i][TX_PRIO_LOW].TxDesRingLock);
+		netif_stop_queue(pAC->dev[i]);
+
+	}
+
+	/*
+	** Depending on the desired MTU size change, a different number of 
+	** RX buffers need to be allocated
+	*/
+	if (NewMtu > 1500) {
+	    /* 
+	    ** Use less rx buffers 
+	    */
+	    for (i=0; i<pAC->GIni.GIMacsFound; i++) {
+		if ((pAC->GIni.GIMacsFound == 2 ) && (pAC->RlmtNets == 2)) {
+		    pAC->RxPort[i].RxFillLimit =  pAC->RxDescrPerRing -
+						 (pAC->RxDescrPerRing / 4);
+		} else {
+		    if (i == pAC->ActivePort) {
+			pAC->RxPort[i].RxFillLimit = pAC->RxDescrPerRing - 
+						    (pAC->RxDescrPerRing / 4);
+		    } else {
+			pAC->RxPort[i].RxFillLimit = pAC->RxDescrPerRing - 
+						    (pAC->RxDescrPerRing / 10);
+		    }
+		}
+	    }
+	} else {
+	    /* 
+	    ** Use the normal amount of rx buffers 
+	    */
+	    for (i=0; i<pAC->GIni.GIMacsFound; i++) {
+		if ((pAC->GIni.GIMacsFound == 2 ) && (pAC->RlmtNets == 2)) {
+		    pAC->RxPort[i].RxFillLimit = 1;
+		} else {
+		    if (i == pAC->ActivePort) {
+			pAC->RxPort[i].RxFillLimit = 1;
+		    } else {
+			pAC->RxPort[i].RxFillLimit = pAC->RxDescrPerRing -
+						    (pAC->RxDescrPerRing / 4);
+		    }
+		}
+	    }
+	}
+	
+	SkGeDeInit(pAC, pAC->IoBase);
+
+	/*
+	** enable/disable hardware support for long frames
+	*/
+	if (NewMtu > 1500) {
+// pAC->JumboActivated = SK_TRUE; /* is never set back !!! */
+		pAC->GIni.GIPortUsage = SK_JUMBO_LINK;
+	} else {
+	    if ((pAC->GIni.GIMacsFound == 2 ) && (pAC->RlmtNets == 2)) {
+		pAC->GIni.GIPortUsage = SK_MUL_LINK;
+	    } else {
+		pAC->GIni.GIPortUsage = SK_RED_LINK;
+	    }
+	}
+
+	SkGeInit(   pAC, pAC->IoBase, SK_INIT_IO);
+	SkI2cInit(  pAC, pAC->IoBase, SK_INIT_IO);
+	SkEventInit(pAC, pAC->IoBase, SK_INIT_IO);
+	SkPnmiInit( pAC, pAC->IoBase, SK_INIT_IO);
+	SkAddrInit( pAC, pAC->IoBase, SK_INIT_IO);
+	SkRlmtInit( pAC, pAC->IoBase, SK_INIT_IO);
+	SkTimerInit(pAC, pAC->IoBase, SK_INIT_IO);
+	
+	/*
+	** tschilling:
+	** Speed and others are set back to default in level 1 init!
+	*/
+	GetConfiguration(pAC);
+	
+	SkGeInit(   pAC, pAC->IoBase, SK_INIT_RUN);
+	SkI2cInit(  pAC, pAC->IoBase, SK_INIT_RUN);
+	SkEventInit(pAC, pAC->IoBase, SK_INIT_RUN);
+	SkPnmiInit( pAC, pAC->IoBase, SK_INIT_RUN);
+	SkAddrInit( pAC, pAC->IoBase, SK_INIT_RUN);
+	SkRlmtInit( pAC, pAC->IoBase, SK_INIT_RUN);
+	SkTimerInit(pAC, pAC->IoBase, SK_INIT_RUN);
+
+	/*
+	** clear and reinit the rx rings here
+	*/
+	for (i=0; i<pAC->GIni.GIMacsFound; i++) {
+		ReceiveIrq(pAC, &pAC->RxPort[i], SK_TRUE);
+		ClearRxRing(pAC, &pAC->RxPort[i]);
+		FillRxRing(pAC, &pAC->RxPort[i]);
+
+		/* 
+		** Enable transmit descriptor polling
+		*/
+		SkGePollTxD(pAC, pAC->IoBase, i, SK_TRUE);
+		FillRxRing(pAC, &pAC->RxPort[i]);
+	};
+
+	SkGeYellowLED(pAC, pAC->IoBase, 1);
+	SkDimEnableModerationIfNeeded(pAC);	
+	SkDimDisplayModerationSettings(pAC);
+
+	netif_start_queue(pAC->dev[pNet->PortNr]);
+	for (i=pAC->GIni.GIMacsFound-1; i>=0; i--) {
+		spin_unlock(&pAC->TxPort[i][TX_PRIO_LOW].TxDesRingLock);
+	}
+
+	/* 
+	** Enable Interrupts again 
+	*/
+	SK_OUT32(pAC->IoBase, B0_IMSK, pAC->GIni.GIValIrqMask);
+	SK_OUT32(pAC->IoBase, B0_HWE_IMSK, IRQ_HWE_MASK);
+
+	SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_START, EvPara);
+	SkEventDispatcher(pAC, pAC->IoBase);
+
+	/* 
+	** Notify RLMT about the changing and restarting one (or more) ports
+	*/
+	if ((pAC->GIni.GIMacsFound == 2 ) && (pAC->RlmtNets == 2)) {
+		EvPara.Para32[0] = pAC->RlmtNets;
+		EvPara.Para32[1] = -1;
+		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_SET_NETS, EvPara);
+		EvPara.Para32[0] = pNet->PortNr;
+		EvPara.Para32[1] = -1;
+		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_START, EvPara);
+			
+		if (netif_running(pOtherDev)) {
+			DEV_NET *pOtherNet = netdev_priv(pOtherDev);
+			EvPara.Para32[0] = pOtherNet->PortNr;
+			SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_START, EvPara);
+		}
+	} else {
+		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_START, EvPara);
+	}
+
+	SkEventDispatcher(pAC, pAC->IoBase);
+	spin_unlock_irqrestore(&pAC->SlowPathLock, Flags);
+	
+	/*
+	** While testing this driver with latest kernel 2.5 (2.5.70), it 
+	** seems as if upper layers have a problem to handle a successful
+	** return value of '0'. If such a zero is returned, the complete 
+	** system hangs for several minutes (!), which is in acceptable.
+	**
+	** Currently it is not clear, what the exact reason for this problem
+	** is. The implemented workaround for 2.5 is to return the desired 
+	** new MTU size if all needed changes for the new MTU size where 
+	** performed. In kernels 2.2 and 2.4, a zero value is returned,
+	** which indicates the successful change of the mtu-size.
+	*/
+	return NewMtu;
+
+} /* SkGeChangeMtu */
+
+
+/*****************************************************************************
+ *
+ * 	SkGeStats - return ethernet device statistics
+ *
+ * Description:
+ *	This function return statistic data about the ethernet device
+ *	to the operating system.
+ *
+ * Returns:
+ *	pointer to the statistic structure.
+ */
+static struct net_device_stats *SkGeStats(struct SK_NET_DEVICE *dev)
+{
+DEV_NET *pNet = netdev_priv(dev);
+SK_AC	*pAC = pNet->pAC;
+SK_PNMI_STRUCT_DATA *pPnmiStruct;       /* structure for all Pnmi-Data */
+SK_PNMI_STAT    *pPnmiStat;             /* pointer to virtual XMAC stat. data */
+SK_PNMI_CONF    *pPnmiConf;             /* pointer to virtual link config. */
+unsigned int    Size;                   /* size of pnmi struct */
+unsigned long	Flags;			/* for spin lock */
+
+	SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY,
+		("SkGeStats starts now...\n"));
+	pPnmiStruct = &pAC->PnmiStruct;
+
+#ifdef SK_DIAG_SUPPORT
+        if ((pAC->DiagModeActive == DIAG_NOTACTIVE) &&
+                (pAC->BoardLevel == SK_INIT_RUN)) {
+#endif
+        SK_MEMSET(pPnmiStruct, 0, sizeof(SK_PNMI_STRUCT_DATA));
+        spin_lock_irqsave(&pAC->SlowPathLock, Flags);
+        Size = SK_PNMI_STRUCT_SIZE;
+		SkPnmiGetStruct(pAC, pAC->IoBase, pPnmiStruct, &Size, pNet->NetNr);
+        spin_unlock_irqrestore(&pAC->SlowPathLock, Flags);
+#ifdef SK_DIAG_SUPPORT
+	}
+#endif
+
+        pPnmiStat = &pPnmiStruct->Stat[0];
+        pPnmiConf = &pPnmiStruct->Conf[0];
+
+	pAC->stats.rx_packets = (SK_U32) pPnmiStruct->RxDeliveredCts & 0xFFFFFFFF;
+	pAC->stats.tx_packets = (SK_U32) pPnmiStat->StatTxOkCts & 0xFFFFFFFF;
+	pAC->stats.rx_bytes = (SK_U32) pPnmiStruct->RxOctetsDeliveredCts;
+	pAC->stats.tx_bytes = (SK_U32) pPnmiStat->StatTxOctetsOkCts;
+	
+        if (dev->mtu <= 1500) {
+                pAC->stats.rx_errors = (SK_U32) pPnmiStruct->InErrorsCts & 0xFFFFFFFF;
+        } else {
+                pAC->stats.rx_errors = (SK_U32) ((pPnmiStruct->InErrorsCts -
+                        pPnmiStat->StatRxTooLongCts) & 0xFFFFFFFF);
+	}
+
+
+	if (pAC->GIni.GP[0].PhyType == SK_PHY_XMAC && pAC->HWRevision < 12)
+		pAC->stats.rx_errors = pAC->stats.rx_errors - pPnmiStat->StatRxShortsCts;
+
+	pAC->stats.tx_errors = (SK_U32) pPnmiStat->StatTxSingleCollisionCts & 0xFFFFFFFF;
+	pAC->stats.rx_dropped = (SK_U32) pPnmiStruct->RxNoBufCts & 0xFFFFFFFF;
+	pAC->stats.tx_dropped = (SK_U32) pPnmiStruct->TxNoBufCts & 0xFFFFFFFF;
+	pAC->stats.multicast = (SK_U32) pPnmiStat->StatRxMulticastOkCts & 0xFFFFFFFF;
+	pAC->stats.collisions = (SK_U32) pPnmiStat->StatTxSingleCollisionCts & 0xFFFFFFFF;
+
+	/* detailed rx_errors: */
+	pAC->stats.rx_length_errors = (SK_U32) pPnmiStat->StatRxRuntCts & 0xFFFFFFFF;
+	pAC->stats.rx_over_errors = (SK_U32) pPnmiStat->StatRxFifoOverflowCts & 0xFFFFFFFF;
+	pAC->stats.rx_crc_errors = (SK_U32) pPnmiStat->StatRxFcsCts & 0xFFFFFFFF;
+	pAC->stats.rx_frame_errors = (SK_U32) pPnmiStat->StatRxFramingCts & 0xFFFFFFFF;
+	pAC->stats.rx_fifo_errors = (SK_U32) pPnmiStat->StatRxFifoOverflowCts & 0xFFFFFFFF;
+	pAC->stats.rx_missed_errors = (SK_U32) pPnmiStat->StatRxMissedCts & 0xFFFFFFFF;
+
+	/* detailed tx_errors */
+	pAC->stats.tx_aborted_errors = (SK_U32) 0;
+	pAC->stats.tx_carrier_errors = (SK_U32) pPnmiStat->StatTxCarrierCts & 0xFFFFFFFF;
+	pAC->stats.tx_fifo_errors = (SK_U32) pPnmiStat->StatTxFifoUnderrunCts & 0xFFFFFFFF;
+	pAC->stats.tx_heartbeat_errors = (SK_U32) pPnmiStat->StatTxCarrierCts & 0xFFFFFFFF;
+	pAC->stats.tx_window_errors = (SK_U32) 0;
+
+	return(&pAC->stats);
+} /* SkGeStats */
+
+/*
+ * Basic MII register access
+ */
+static int SkGeMiiIoctl(struct net_device *dev,
+			struct mii_ioctl_data *data, int cmd)
+{
+	DEV_NET *pNet = netdev_priv(dev);
+	SK_AC *pAC = pNet->pAC;
+	SK_IOC IoC = pAC->IoBase;
+	int Port = pNet->PortNr;
+	SK_GEPORT *pPrt = &pAC->GIni.GP[Port];
+	unsigned long Flags;
+	int err = 0;
+	int reg = data->reg_num & 0x1f;
+	SK_U16 val = data->val_in;
+
+	if (!netif_running(dev))
+		return -ENODEV;	/* Phy still in reset */
+
+	spin_lock_irqsave(&pAC->SlowPathLock, Flags);
+	switch(cmd) {
+	case SIOCGMIIPHY:
+		data->phy_id = pPrt->PhyAddr;
+
+		/* fallthru */
+	case SIOCGMIIREG:
+		if (pAC->GIni.GIGenesis)
+			SkXmPhyRead(pAC, IoC, Port, reg, &val);
+		else
+			SkGmPhyRead(pAC, IoC, Port, reg, &val);
+
+		data->val_out = val;
+		break;
+
+	case SIOCSMIIREG:
+		if (!capable(CAP_NET_ADMIN))
+			err = -EPERM;
+
+		else if (pAC->GIni.GIGenesis)
+			SkXmPhyWrite(pAC, IoC, Port, reg, val);
+		else
+			SkGmPhyWrite(pAC, IoC, Port, reg, val);
+		break;
+	default:
+		err = -EOPNOTSUPP;
+	}
+        spin_unlock_irqrestore(&pAC->SlowPathLock, Flags);
+	return err;
+}
+
+
+/*****************************************************************************
+ *
+ * 	SkGeIoctl - IO-control function
+ *
+ * Description:
+ *	This function is called if an ioctl is issued on the device.
+ *	There are three subfunction for reading, writing and test-writing
+ *	the private MIB data structure (useful for SysKonnect-internal tools).
+ *
+ * Returns:
+ *	0, if everything is ok
+ *	!=0, on error
+ */
+static int SkGeIoctl(struct SK_NET_DEVICE *dev, struct ifreq *rq, int cmd)
+{
+DEV_NET		*pNet;
+SK_AC		*pAC;
+void		*pMemBuf;
+struct pci_dev  *pdev = NULL;
+SK_GE_IOCTL	Ioctl;
+unsigned int	Err = 0;
+int		Size = 0;
+int             Ret = 0;
+unsigned int	Length = 0;
+int		HeaderLength = sizeof(SK_U32) + sizeof(SK_U32);
+
+	SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY,
+		("SkGeIoctl starts now...\n"));
+
+	pNet = netdev_priv(dev);
+	pAC = pNet->pAC;
+	
+	if (cmd == SIOCGMIIPHY || cmd == SIOCSMIIREG || cmd == SIOCGMIIREG)
+	    return SkGeMiiIoctl(dev, if_mii(rq), cmd);
+
+	if(copy_from_user(&Ioctl, rq->ifr_data, sizeof(SK_GE_IOCTL))) {
+		return -EFAULT;
+	}
+
+	switch(cmd) {
+	case SK_IOCTL_SETMIB:
+	case SK_IOCTL_PRESETMIB:
+		if (!capable(CAP_NET_ADMIN)) return -EPERM;
+ 	case SK_IOCTL_GETMIB:
+		if(copy_from_user(&pAC->PnmiStruct, Ioctl.pData,
+			Ioctl.Len<sizeof(pAC->PnmiStruct)?
+			Ioctl.Len : sizeof(pAC->PnmiStruct))) {
+			return -EFAULT;
+		}
+		Size = SkGeIocMib(pNet, Ioctl.Len, cmd);
+		if(copy_to_user(Ioctl.pData, &pAC->PnmiStruct,
+			Ioctl.Len<Size? Ioctl.Len : Size)) {
+			return -EFAULT;
+		}
+		Ioctl.Len = Size;
+		if(copy_to_user(rq->ifr_data, &Ioctl, sizeof(SK_GE_IOCTL))) {
+			return -EFAULT;
+		}
+		break;
+	case SK_IOCTL_GEN:
+		if (Ioctl.Len < (sizeof(pAC->PnmiStruct) + HeaderLength)) {
+			Length = Ioctl.Len;
+		} else {
+			Length = sizeof(pAC->PnmiStruct) + HeaderLength;
+		}
+		if (NULL == (pMemBuf = kmalloc(Length, GFP_KERNEL))) {
+			return -ENOMEM;
+		}
+		if(copy_from_user(pMemBuf, Ioctl.pData, Length)) {
+			Err = -EFAULT;
+			goto fault_gen;
+		}
+		if ((Ret = SkPnmiGenIoctl(pAC, pAC->IoBase, pMemBuf, &Length, 0)) < 0) {
+			Err = -EFAULT;
+			goto fault_gen;
+		}
+		if(copy_to_user(Ioctl.pData, pMemBuf, Length) ) {
+			Err = -EFAULT;
+			goto fault_gen;
+		}
+		Ioctl.Len = Length;
+		if(copy_to_user(rq->ifr_data, &Ioctl, sizeof(SK_GE_IOCTL))) {
+			Err = -EFAULT;
+			goto fault_gen;
+		}
+fault_gen:
+		kfree(pMemBuf); /* cleanup everything */
+		break;
+#ifdef SK_DIAG_SUPPORT
+       case SK_IOCTL_DIAG:
+		if (!capable(CAP_NET_ADMIN)) return -EPERM;
+		if (Ioctl.Len < (sizeof(pAC->PnmiStruct) + HeaderLength)) {
+			Length = Ioctl.Len;
+		} else {
+			Length = sizeof(pAC->PnmiStruct) + HeaderLength;
+		}
+		if (NULL == (pMemBuf = kmalloc(Length, GFP_KERNEL))) {
+			return -ENOMEM;
+		}
+		if(copy_from_user(pMemBuf, Ioctl.pData, Length)) {
+			Err = -EFAULT;
+			goto fault_diag;
+		}
+		pdev = pAC->PciDev;
+		Length = 3 * sizeof(SK_U32);  /* Error, Bus and Device */
+		/* 
+		** While coding this new IOCTL interface, only a few lines of code
+		** are to to be added. Therefore no dedicated function has been 
+		** added. If more functionality is added, a separate function 
+		** should be used...
+		*/
+		* ((SK_U32 *)pMemBuf) = 0;
+		* ((SK_U32 *)pMemBuf + 1) = pdev->bus->number;
+		* ((SK_U32 *)pMemBuf + 2) = ParseDeviceNbrFromSlotName(pci_name(pdev));
+		if(copy_to_user(Ioctl.pData, pMemBuf, Length) ) {
+			Err = -EFAULT;
+			goto fault_diag;
+		}
+		Ioctl.Len = Length;
+		if(copy_to_user(rq->ifr_data, &Ioctl, sizeof(SK_GE_IOCTL))) {
+			Err = -EFAULT;
+			goto fault_diag;
+		}
+fault_diag:
+		kfree(pMemBuf); /* cleanup everything */
+		break;
+#endif
+	default:
+		Err = -EOPNOTSUPP;
+	}
+
+	return(Err);
+
+} /* SkGeIoctl */
+
+
+/*****************************************************************************
+ *
+ * 	SkGeIocMib - handle a GetMib, SetMib- or PresetMib-ioctl message
+ *
+ * Description:
+ *	This function reads/writes the MIB data using PNMI (Private Network
+ *	Management Interface).
+ *	The destination for the data must be provided with the
+ *	ioctl call and is given to the driver in the form of
+ *	a user space address.
+ *	Copying from the user-provided data area into kernel messages
+ *	and back is done by copy_from_user and copy_to_user calls in
+ *	SkGeIoctl.
+ *
+ * Returns:
+ *	returned size from PNMI call
+ */
+static int SkGeIocMib(
+DEV_NET		*pNet,	/* pointer to the adapter context */
+unsigned int	Size,	/* length of ioctl data */
+int		mode)	/* flag for set/preset */
+{
+unsigned long	Flags;	/* for spin lock */
+SK_AC		*pAC;
+
+	SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY,
+		("SkGeIocMib starts now...\n"));
+	pAC = pNet->pAC;
+	/* access MIB */
+	spin_lock_irqsave(&pAC->SlowPathLock, Flags);
+	switch(mode) {
+	case SK_IOCTL_GETMIB:
+		SkPnmiGetStruct(pAC, pAC->IoBase, &pAC->PnmiStruct, &Size,
+			pNet->NetNr);
+		break;
+	case SK_IOCTL_PRESETMIB:
+		SkPnmiPreSetStruct(pAC, pAC->IoBase, &pAC->PnmiStruct, &Size,
+			pNet->NetNr);
+		break;
+	case SK_IOCTL_SETMIB:
+		SkPnmiSetStruct(pAC, pAC->IoBase, &pAC->PnmiStruct, &Size,
+			pNet->NetNr);
+		break;
+	default:
+		break;
+	}
+	spin_unlock_irqrestore(&pAC->SlowPathLock, Flags);
+	SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY,
+		("MIB data access succeeded\n"));
+	return (Size);
+} /* SkGeIocMib */
+
+
+/*****************************************************************************
+ *
+ * 	GetConfiguration - read configuration information
+ *
+ * Description:
+ *	This function reads per-adapter configuration information from
+ *	the options provided on the command line.
+ *
+ * Returns:
+ *	none
+ */
+static void GetConfiguration(
+SK_AC	*pAC)	/* pointer to the adapter context structure */
+{
+SK_I32	Port;		/* preferred port */
+SK_BOOL	AutoSet;
+SK_BOOL DupSet;
+int	LinkSpeed          = SK_LSPEED_AUTO;	/* Link speed */
+int	AutoNeg            = 1;			/* autoneg off (0) or on (1) */
+int	DuplexCap          = 0;			/* 0=both,1=full,2=half */
+int	FlowCtrl           = SK_FLOW_MODE_SYM_OR_REM;	/* FlowControl  */
+int	MSMode             = SK_MS_MODE_AUTO;	/* master/slave mode    */
+
+SK_BOOL IsConTypeDefined   = SK_TRUE;
+SK_BOOL IsLinkSpeedDefined = SK_TRUE;
+SK_BOOL IsFlowCtrlDefined  = SK_TRUE;
+SK_BOOL IsRoleDefined      = SK_TRUE;
+SK_BOOL IsModeDefined      = SK_TRUE;
+/*
+ *	The two parameters AutoNeg. and DuplexCap. map to one configuration
+ *	parameter. The mapping is described by this table:
+ *	DuplexCap ->	|	both	|	full	|	half	|
+ *	AutoNeg		|		|		|		|
+ *	-----------------------------------------------------------------
+ *	Off		|    illegal	|	Full	|	Half	|
+ *	-----------------------------------------------------------------
+ *	On		|   AutoBoth	|   AutoFull	|   AutoHalf	|
+ *	-----------------------------------------------------------------
+ *	Sense		|   AutoSense	|   AutoSense	|   AutoSense	|
+ */
+int	Capabilities[3][3] =
+		{ {                -1, SK_LMODE_FULL     , SK_LMODE_HALF     },
+		  {SK_LMODE_AUTOBOTH , SK_LMODE_AUTOFULL , SK_LMODE_AUTOHALF },
+		  {SK_LMODE_AUTOSENSE, SK_LMODE_AUTOSENSE, SK_LMODE_AUTOSENSE} };
+
+#define DC_BOTH	0
+#define DC_FULL 1
+#define DC_HALF 2
+#define AN_OFF	0
+#define AN_ON	1
+#define AN_SENS	2
+#define M_CurrPort pAC->GIni.GP[Port]
+
+
+	/*
+	** Set the default values first for both ports!
+	*/
+	for (Port = 0; Port < SK_MAX_MACS; Port++) {
+		M_CurrPort.PLinkModeConf = Capabilities[AN_ON][DC_BOTH];
+		M_CurrPort.PFlowCtrlMode = SK_FLOW_MODE_SYM_OR_REM;
+		M_CurrPort.PMSMode       = SK_MS_MODE_AUTO;
+		M_CurrPort.PLinkSpeed    = SK_LSPEED_AUTO;
+	}
+
+	/*
+	** Check merged parameter ConType. If it has not been used,
+	** verify any other parameter (e.g. AutoNeg) and use default values. 
+	**
+	** Stating both ConType and other lowlevel link parameters is also
+	** possible. If this is the case, the passed ConType-parameter is 
+	** overwritten by the lowlevel link parameter.
+	**
+	** The following settings are used for a merged ConType-parameter:
+	**
+	** ConType   DupCap   AutoNeg   FlowCtrl      Role      Speed
+	** -------   ------   -------   --------   ----------   -----
+	**  Auto      Both      On      SymOrRem      Auto       Auto
+	**  100FD     Full      Off       None      <ignored>    100
+	**  100HD     Half      Off       None      <ignored>    100
+	**  10FD      Full      Off       None      <ignored>    10
+	**  10HD      Half      Off       None      <ignored>    10
+	** 
+	** This ConType parameter is used for all ports of the adapter!
+	*/
+        if ( (ConType != NULL)                && 
+	     (pAC->Index < SK_MAX_CARD_PARAM) &&
+	     (ConType[pAC->Index] != NULL) ) {
+
+			/* Check chipset family */
+			if ((!pAC->ChipsetType) && 
+				(strcmp(ConType[pAC->Index],"Auto")!=0) &&
+				(strcmp(ConType[pAC->Index],"")!=0)) {
+				/* Set the speed parameter back */
+					printk("sk98lin: Illegal value \"%s\" " 
+							"for ConType."
+							" Using Auto.\n", 
+							ConType[pAC->Index]);
+
+					sprintf(ConType[pAC->Index], "Auto");	
+			}
+
+				if (strcmp(ConType[pAC->Index],"")==0) {
+			IsConTypeDefined = SK_FALSE; /* No ConType defined */
+				} else if (strcmp(ConType[pAC->Index],"Auto")==0) {
+		    for (Port = 0; Port < SK_MAX_MACS; Port++) {
+			M_CurrPort.PLinkModeConf = Capabilities[AN_ON][DC_BOTH];
+			M_CurrPort.PFlowCtrlMode = SK_FLOW_MODE_SYM_OR_REM;
+			M_CurrPort.PMSMode       = SK_MS_MODE_AUTO;
+			M_CurrPort.PLinkSpeed    = SK_LSPEED_AUTO;
+		    }
+                } else if (strcmp(ConType[pAC->Index],"100FD")==0) {
+		    for (Port = 0; Port < SK_MAX_MACS; Port++) {
+			M_CurrPort.PLinkModeConf = Capabilities[AN_OFF][DC_FULL];
+			M_CurrPort.PFlowCtrlMode = SK_FLOW_MODE_NONE;
+			M_CurrPort.PMSMode       = SK_MS_MODE_AUTO;
+			M_CurrPort.PLinkSpeed    = SK_LSPEED_100MBPS;
+		    }
+                } else if (strcmp(ConType[pAC->Index],"100HD")==0) {
+		    for (Port = 0; Port < SK_MAX_MACS; Port++) {
+			M_CurrPort.PLinkModeConf = Capabilities[AN_OFF][DC_HALF];
+			M_CurrPort.PFlowCtrlMode = SK_FLOW_MODE_NONE;
+			M_CurrPort.PMSMode       = SK_MS_MODE_AUTO;
+			M_CurrPort.PLinkSpeed    = SK_LSPEED_100MBPS;
+		    }
+                } else if (strcmp(ConType[pAC->Index],"10FD")==0) {
+		    for (Port = 0; Port < SK_MAX_MACS; Port++) {
+			M_CurrPort.PLinkModeConf = Capabilities[AN_OFF][DC_FULL];
+			M_CurrPort.PFlowCtrlMode = SK_FLOW_MODE_NONE;
+			M_CurrPort.PMSMode       = SK_MS_MODE_AUTO;
+			M_CurrPort.PLinkSpeed    = SK_LSPEED_10MBPS;
+		    }
+                } else if (strcmp(ConType[pAC->Index],"10HD")==0) {
+		    for (Port = 0; Port < SK_MAX_MACS; Port++) {
+			M_CurrPort.PLinkModeConf = Capabilities[AN_OFF][DC_HALF];
+			M_CurrPort.PFlowCtrlMode = SK_FLOW_MODE_NONE;
+			M_CurrPort.PMSMode       = SK_MS_MODE_AUTO;
+			M_CurrPort.PLinkSpeed    = SK_LSPEED_10MBPS;
+		    }
+                } else { 
+		    printk("sk98lin: Illegal value \"%s\" for ConType\n", 
+			ConType[pAC->Index]);
+		    IsConTypeDefined = SK_FALSE; /* Wrong ConType defined */
+		}
+        } else {
+	    IsConTypeDefined = SK_FALSE; /* No ConType defined */
+	}
+
+	/*
+	** Parse any parameter settings for port A:
+	** a) any LinkSpeed stated?
+	*/
+	if (Speed_A != NULL && pAC->Index<SK_MAX_CARD_PARAM &&
+		Speed_A[pAC->Index] != NULL) {
+		if (strcmp(Speed_A[pAC->Index],"")==0) {
+		    IsLinkSpeedDefined = SK_FALSE;
+		} else if (strcmp(Speed_A[pAC->Index],"Auto")==0) {
+		    LinkSpeed = SK_LSPEED_AUTO;
+		} else if (strcmp(Speed_A[pAC->Index],"10")==0) {
+		    LinkSpeed = SK_LSPEED_10MBPS;
+		} else if (strcmp(Speed_A[pAC->Index],"100")==0) {
+		    LinkSpeed = SK_LSPEED_100MBPS;
+		} else if (strcmp(Speed_A[pAC->Index],"1000")==0) {
+		    LinkSpeed = SK_LSPEED_1000MBPS;
+		} else {
+		    printk("sk98lin: Illegal value \"%s\" for Speed_A\n",
+			Speed_A[pAC->Index]);
+		    IsLinkSpeedDefined = SK_FALSE;
+		}
+	} else {
+	    IsLinkSpeedDefined = SK_FALSE;
+	}
+
+	/* 
+	** Check speed parameter: 
+	**    Only copper type adapter and GE V2 cards 
+	*/
+	if (((!pAC->ChipsetType) || (pAC->GIni.GICopperType != SK_TRUE)) &&
+		((LinkSpeed != SK_LSPEED_AUTO) &&
+		(LinkSpeed != SK_LSPEED_1000MBPS))) {
+		printk("sk98lin: Illegal value for Speed_A. "
+			"Not a copper card or GE V2 card\n    Using "
+			"speed 1000\n");
+		LinkSpeed = SK_LSPEED_1000MBPS;
+	}
+	
+	/*	
+	** Decide whether to set new config value if somethig valid has
+	** been received.
+	*/
+	if (IsLinkSpeedDefined) {
+		pAC->GIni.GP[0].PLinkSpeed = LinkSpeed;
+	} 
+
+	/* 
+	** b) Any Autonegotiation and DuplexCapabilities set?
+	**    Please note that both belong together...
+	*/
+	AutoNeg = AN_ON; /* tschilling: Default: Autonegotiation on! */
+	AutoSet = SK_FALSE;
+	if (AutoNeg_A != NULL && pAC->Index<SK_MAX_CARD_PARAM &&
+		AutoNeg_A[pAC->Index] != NULL) {
+		AutoSet = SK_TRUE;
+		if (strcmp(AutoNeg_A[pAC->Index],"")==0) {
+		    AutoSet = SK_FALSE;
+		} else if (strcmp(AutoNeg_A[pAC->Index],"On")==0) {
+		    AutoNeg = AN_ON;
+		} else if (strcmp(AutoNeg_A[pAC->Index],"Off")==0) {
+		    AutoNeg = AN_OFF;
+		} else if (strcmp(AutoNeg_A[pAC->Index],"Sense")==0) {
+		    AutoNeg = AN_SENS;
+		} else {
+		    printk("sk98lin: Illegal value \"%s\" for AutoNeg_A\n",
+			AutoNeg_A[pAC->Index]);
+		}
+	}
+
+	DuplexCap = DC_BOTH;
+	DupSet    = SK_FALSE;
+	if (DupCap_A != NULL && pAC->Index<SK_MAX_CARD_PARAM &&
+		DupCap_A[pAC->Index] != NULL) {
+		DupSet = SK_TRUE;
+		if (strcmp(DupCap_A[pAC->Index],"")==0) {
+		    DupSet = SK_FALSE;
+		} else if (strcmp(DupCap_A[pAC->Index],"Both")==0) {
+		    DuplexCap = DC_BOTH;
+		} else if (strcmp(DupCap_A[pAC->Index],"Full")==0) {
+		    DuplexCap = DC_FULL;
+		} else if (strcmp(DupCap_A[pAC->Index],"Half")==0) {
+		    DuplexCap = DC_HALF;
+		} else {
+		    printk("sk98lin: Illegal value \"%s\" for DupCap_A\n",
+			DupCap_A[pAC->Index]);
+		}
+	}
+
+	/* 
+	** Check for illegal combinations 
+	*/
+	if ((LinkSpeed == SK_LSPEED_1000MBPS) &&
+		((DuplexCap == SK_LMODE_STAT_AUTOHALF) ||
+		(DuplexCap == SK_LMODE_STAT_HALF)) &&
+		(pAC->ChipsetType)) {
+		    printk("sk98lin: Half Duplex not possible with Gigabit speed!\n"
+					"    Using Full Duplex.\n");
+				DuplexCap = DC_FULL;
+	}
+
+	if ( AutoSet && AutoNeg==AN_SENS && DupSet) {
+		printk("sk98lin, Port A: DuplexCapabilities"
+			" ignored using Sense mode\n");
+	}
+
+	if (AutoSet && AutoNeg==AN_OFF && DupSet && DuplexCap==DC_BOTH){
+		printk("sk98lin: Port A: Illegal combination"
+			" of values AutoNeg. and DuplexCap.\n    Using "
+			"Full Duplex\n");
+		DuplexCap = DC_FULL;
+	}
+
+	if (AutoSet && AutoNeg==AN_OFF && !DupSet) {
+		DuplexCap = DC_FULL;
+	}
+	
+	if (!AutoSet && DupSet) {
+		printk("sk98lin: Port A: Duplex setting not"
+			" possible in\n    default AutoNegotiation mode"
+			" (Sense).\n    Using AutoNegotiation On\n");
+		AutoNeg = AN_ON;
+	}
+	
+	/* 
+	** set the desired mode 
+	*/
+	if (AutoSet || DupSet) {
+	    pAC->GIni.GP[0].PLinkModeConf = Capabilities[AutoNeg][DuplexCap];
+	}
+	
+	/* 
+	** c) Any Flowcontrol-parameter set?
+	*/
+	if (FlowCtrl_A != NULL && pAC->Index<SK_MAX_CARD_PARAM &&
+		FlowCtrl_A[pAC->Index] != NULL) {
+		if (strcmp(FlowCtrl_A[pAC->Index],"") == 0) {
+		    IsFlowCtrlDefined = SK_FALSE;
+		} else if (strcmp(FlowCtrl_A[pAC->Index],"SymOrRem") == 0) {
+		    FlowCtrl = SK_FLOW_MODE_SYM_OR_REM;
+		} else if (strcmp(FlowCtrl_A[pAC->Index],"Sym")==0) {
+		    FlowCtrl = SK_FLOW_MODE_SYMMETRIC;
+		} else if (strcmp(FlowCtrl_A[pAC->Index],"LocSend")==0) {
+		    FlowCtrl = SK_FLOW_MODE_LOC_SEND;
+		} else if (strcmp(FlowCtrl_A[pAC->Index],"None")==0) {
+		    FlowCtrl = SK_FLOW_MODE_NONE;
+		} else {
+		    printk("sk98lin: Illegal value \"%s\" for FlowCtrl_A\n",
+                        FlowCtrl_A[pAC->Index]);
+		    IsFlowCtrlDefined = SK_FALSE;
+		}
+	} else {
+	   IsFlowCtrlDefined = SK_FALSE;
+	}
+
+	if (IsFlowCtrlDefined) {
+	    if ((AutoNeg == AN_OFF) && (FlowCtrl != SK_FLOW_MODE_NONE)) {
+		printk("sk98lin: Port A: FlowControl"
+			" impossible without AutoNegotiation,"
+			" disabled\n");
+		FlowCtrl = SK_FLOW_MODE_NONE;
+	    }
+	    pAC->GIni.GP[0].PFlowCtrlMode = FlowCtrl;
+	}
+
+	/*
+	** d) What is with the RoleParameter?
+	*/
+	if (Role_A != NULL && pAC->Index<SK_MAX_CARD_PARAM &&
+		Role_A[pAC->Index] != NULL) {
+		if (strcmp(Role_A[pAC->Index],"")==0) {
+		   IsRoleDefined = SK_FALSE;
+		} else if (strcmp(Role_A[pAC->Index],"Auto")==0) {
+		    MSMode = SK_MS_MODE_AUTO;
+		} else if (strcmp(Role_A[pAC->Index],"Master")==0) {
+		    MSMode = SK_MS_MODE_MASTER;
+		} else if (strcmp(Role_A[pAC->Index],"Slave")==0) {
+		    MSMode = SK_MS_MODE_SLAVE;
+		} else {
+		    printk("sk98lin: Illegal value \"%s\" for Role_A\n",
+			Role_A[pAC->Index]);
+		    IsRoleDefined = SK_FALSE;
+		}
+	} else {
+	   IsRoleDefined = SK_FALSE;
+	}
+
+	if (IsRoleDefined == SK_TRUE) {
+	    pAC->GIni.GP[0].PMSMode = MSMode;
+	}
+	
+
+	
+	/* 
+	** Parse any parameter settings for port B:
+	** a) any LinkSpeed stated?
+	*/
+	IsConTypeDefined   = SK_TRUE;
+	IsLinkSpeedDefined = SK_TRUE;
+	IsFlowCtrlDefined  = SK_TRUE;
+	IsModeDefined      = SK_TRUE;
+
+	if (Speed_B != NULL && pAC->Index<SK_MAX_CARD_PARAM &&
+		Speed_B[pAC->Index] != NULL) {
+		if (strcmp(Speed_B[pAC->Index],"")==0) {
+		    IsLinkSpeedDefined = SK_FALSE;
+		} else if (strcmp(Speed_B[pAC->Index],"Auto")==0) {
+		    LinkSpeed = SK_LSPEED_AUTO;
+		} else if (strcmp(Speed_B[pAC->Index],"10")==0) {
+		    LinkSpeed = SK_LSPEED_10MBPS;
+		} else if (strcmp(Speed_B[pAC->Index],"100")==0) {
+		    LinkSpeed = SK_LSPEED_100MBPS;
+		} else if (strcmp(Speed_B[pAC->Index],"1000")==0) {
+		    LinkSpeed = SK_LSPEED_1000MBPS;
+		} else {
+		    printk("sk98lin: Illegal value \"%s\" for Speed_B\n",
+			Speed_B[pAC->Index]);
+		    IsLinkSpeedDefined = SK_FALSE;
+		}
+	} else {
+	    IsLinkSpeedDefined = SK_FALSE;
+	}
+
+	/* 
+	** Check speed parameter:
+	**    Only copper type adapter and GE V2 cards 
+	*/
+	if (((!pAC->ChipsetType) || (pAC->GIni.GICopperType != SK_TRUE)) &&
+		((LinkSpeed != SK_LSPEED_AUTO) &&
+		(LinkSpeed != SK_LSPEED_1000MBPS))) {
+		printk("sk98lin: Illegal value for Speed_B. "
+			"Not a copper card or GE V2 card\n    Using "
+			"speed 1000\n");
+		LinkSpeed = SK_LSPEED_1000MBPS;
+	}
+
+	/*      
+	** Decide whether to set new config value if somethig valid has
+	** been received.
+	*/
+        if (IsLinkSpeedDefined) {
+	    pAC->GIni.GP[1].PLinkSpeed = LinkSpeed;
+	}
+
+	/* 
+	** b) Any Autonegotiation and DuplexCapabilities set?
+	**    Please note that both belong together...
+	*/
+	AutoNeg = AN_SENS; /* default: do auto Sense */
+	AutoSet = SK_FALSE;
+	if (AutoNeg_B != NULL && pAC->Index<SK_MAX_CARD_PARAM &&
+		AutoNeg_B[pAC->Index] != NULL) {
+		AutoSet = SK_TRUE;
+		if (strcmp(AutoNeg_B[pAC->Index],"")==0) {
+		    AutoSet = SK_FALSE;
+		} else if (strcmp(AutoNeg_B[pAC->Index],"On")==0) {
+		    AutoNeg = AN_ON;
+		} else if (strcmp(AutoNeg_B[pAC->Index],"Off")==0) {
+		    AutoNeg = AN_OFF;
+		} else if (strcmp(AutoNeg_B[pAC->Index],"Sense")==0) {
+		    AutoNeg = AN_SENS;
+		} else {
+		    printk("sk98lin: Illegal value \"%s\" for AutoNeg_B\n",
+			AutoNeg_B[pAC->Index]);
+		}
+	}
+
+	DuplexCap = DC_BOTH;
+	DupSet    = SK_FALSE;
+	if (DupCap_B != NULL && pAC->Index<SK_MAX_CARD_PARAM &&
+		DupCap_B[pAC->Index] != NULL) {
+		DupSet = SK_TRUE;
+		if (strcmp(DupCap_B[pAC->Index],"")==0) {
+		    DupSet = SK_FALSE;
+		} else if (strcmp(DupCap_B[pAC->Index],"Both")==0) {
+		    DuplexCap = DC_BOTH;
+		} else if (strcmp(DupCap_B[pAC->Index],"Full")==0) {
+		    DuplexCap = DC_FULL;
+		} else if (strcmp(DupCap_B[pAC->Index],"Half")==0) {
+		    DuplexCap = DC_HALF;
+		} else {
+		    printk("sk98lin: Illegal value \"%s\" for DupCap_B\n",
+			DupCap_B[pAC->Index]);
+		}
+	}
+
+	
+	/* 
+	** Check for illegal combinations 
+	*/
+	if ((LinkSpeed == SK_LSPEED_1000MBPS) &&
+		((DuplexCap == SK_LMODE_STAT_AUTOHALF) ||
+		(DuplexCap == SK_LMODE_STAT_HALF)) &&
+		(pAC->ChipsetType)) {
+		    printk("sk98lin: Half Duplex not possible with Gigabit speed!\n"
+					"    Using Full Duplex.\n");
+				DuplexCap = DC_FULL;
+	}
+
+	if (AutoSet && AutoNeg==AN_SENS && DupSet) {
+		printk("sk98lin, Port B: DuplexCapabilities"
+			" ignored using Sense mode\n");
+	}
+
+	if (AutoSet && AutoNeg==AN_OFF && DupSet && DuplexCap==DC_BOTH){
+		printk("sk98lin: Port B: Illegal combination"
+			" of values AutoNeg. and DuplexCap.\n    Using "
+			"Full Duplex\n");
+		DuplexCap = DC_FULL;
+	}
+
+	if (AutoSet && AutoNeg==AN_OFF && !DupSet) {
+		DuplexCap = DC_FULL;
+	}
+	
+	if (!AutoSet && DupSet) {
+		printk("sk98lin: Port B: Duplex setting not"
+			" possible in\n    default AutoNegotiation mode"
+			" (Sense).\n    Using AutoNegotiation On\n");
+		AutoNeg = AN_ON;
+	}
+
+	/* 
+	** set the desired mode 
+	*/
+	if (AutoSet || DupSet) {
+	    pAC->GIni.GP[1].PLinkModeConf = Capabilities[AutoNeg][DuplexCap];
+	}
+
+	/*
+	** c) Any FlowCtrl parameter set?
+	*/
+	if (FlowCtrl_B != NULL && pAC->Index<SK_MAX_CARD_PARAM &&
+		FlowCtrl_B[pAC->Index] != NULL) {
+		if (strcmp(FlowCtrl_B[pAC->Index],"") == 0) {
+		    IsFlowCtrlDefined = SK_FALSE;
+		} else if (strcmp(FlowCtrl_B[pAC->Index],"SymOrRem") == 0) {
+		    FlowCtrl = SK_FLOW_MODE_SYM_OR_REM;
+		} else if (strcmp(FlowCtrl_B[pAC->Index],"Sym")==0) {
+		    FlowCtrl = SK_FLOW_MODE_SYMMETRIC;
+		} else if (strcmp(FlowCtrl_B[pAC->Index],"LocSend")==0) {
+		    FlowCtrl = SK_FLOW_MODE_LOC_SEND;
+		} else if (strcmp(FlowCtrl_B[pAC->Index],"None")==0) {
+		    FlowCtrl = SK_FLOW_MODE_NONE;
+		} else {
+		    printk("sk98lin: Illegal value \"%s\" for FlowCtrl_B\n",
+			FlowCtrl_B[pAC->Index]);
+		    IsFlowCtrlDefined = SK_FALSE;
+		}
+	} else {
+		IsFlowCtrlDefined = SK_FALSE;
+	}
+
+	if (IsFlowCtrlDefined) {
+	    if ((AutoNeg == AN_OFF) && (FlowCtrl != SK_FLOW_MODE_NONE)) {
+		printk("sk98lin: Port B: FlowControl"
+			" impossible without AutoNegotiation,"
+			" disabled\n");
+		FlowCtrl = SK_FLOW_MODE_NONE;
+	    }
+	    pAC->GIni.GP[1].PFlowCtrlMode = FlowCtrl;
+	}
+
+	/*
+	** d) What is the RoleParameter?
+	*/
+	if (Role_B != NULL && pAC->Index<SK_MAX_CARD_PARAM &&
+		Role_B[pAC->Index] != NULL) {
+		if (strcmp(Role_B[pAC->Index],"")==0) {
+		    IsRoleDefined = SK_FALSE;
+		} else if (strcmp(Role_B[pAC->Index],"Auto")==0) {
+		    MSMode = SK_MS_MODE_AUTO;
+		} else if (strcmp(Role_B[pAC->Index],"Master")==0) {
+		    MSMode = SK_MS_MODE_MASTER;
+		} else if (strcmp(Role_B[pAC->Index],"Slave")==0) {
+		    MSMode = SK_MS_MODE_SLAVE;
+		} else {
+		    printk("sk98lin: Illegal value \"%s\" for Role_B\n",
+			Role_B[pAC->Index]);
+		    IsRoleDefined = SK_FALSE;
+		}
+	} else {
+	    IsRoleDefined = SK_FALSE;
+	}
+
+	if (IsRoleDefined) {
+	    pAC->GIni.GP[1].PMSMode = MSMode;
+	}
+	
+	/*
+	** Evaluate settings for both ports
+	*/
+	pAC->ActivePort = 0;
+	if (PrefPort != NULL && pAC->Index<SK_MAX_CARD_PARAM &&
+		PrefPort[pAC->Index] != NULL) {
+		if (strcmp(PrefPort[pAC->Index],"") == 0) { /* Auto */
+			pAC->ActivePort             =  0;
+			pAC->Rlmt.Net[0].Preference = -1; /* auto */
+			pAC->Rlmt.Net[0].PrefPort   =  0;
+		} else if (strcmp(PrefPort[pAC->Index],"A") == 0) {
+			/*
+			** do not set ActivePort here, thus a port
+			** switch is issued after net up.
+			*/
+			Port                        = 0;
+			pAC->Rlmt.Net[0].Preference = Port;
+			pAC->Rlmt.Net[0].PrefPort   = Port;
+		} else if (strcmp(PrefPort[pAC->Index],"B") == 0) {
+			/*
+			** do not set ActivePort here, thus a port
+			** switch is issued after net up.
+			*/
+			if (pAC->GIni.GIMacsFound == 1) {
+				printk("sk98lin: Illegal value \"B\" for PrefPort.\n"
+					"      Port B not available on single port adapters.\n");
+
+				pAC->ActivePort             =  0;
+				pAC->Rlmt.Net[0].Preference = -1; /* auto */
+				pAC->Rlmt.Net[0].PrefPort   =  0;
+			} else {
+				Port                        = 1;
+				pAC->Rlmt.Net[0].Preference = Port;
+				pAC->Rlmt.Net[0].PrefPort   = Port;
+			}
+		} else {
+		    printk("sk98lin: Illegal value \"%s\" for PrefPort\n",
+			PrefPort[pAC->Index]);
+		}
+	}
+
+	pAC->RlmtNets = 1;
+
+	if (RlmtMode != NULL && pAC->Index<SK_MAX_CARD_PARAM &&
+		RlmtMode[pAC->Index] != NULL) {
+		if (strcmp(RlmtMode[pAC->Index], "") == 0) {
+			pAC->RlmtMode = 0;
+		} else if (strcmp(RlmtMode[pAC->Index], "CheckLinkState") == 0) {
+			pAC->RlmtMode = SK_RLMT_CHECK_LINK;
+		} else if (strcmp(RlmtMode[pAC->Index], "CheckLocalPort") == 0) {
+			pAC->RlmtMode = SK_RLMT_CHECK_LINK |
+					SK_RLMT_CHECK_LOC_LINK;
+		} else if (strcmp(RlmtMode[pAC->Index], "CheckSeg") == 0) {
+			pAC->RlmtMode = SK_RLMT_CHECK_LINK     |
+					SK_RLMT_CHECK_LOC_LINK |
+					SK_RLMT_CHECK_SEG;
+		} else if ((strcmp(RlmtMode[pAC->Index], "DualNet") == 0) &&
+			(pAC->GIni.GIMacsFound == 2)) {
+			pAC->RlmtMode = SK_RLMT_CHECK_LINK;
+			pAC->RlmtNets = 2;
+		} else {
+		    printk("sk98lin: Illegal value \"%s\" for"
+			" RlmtMode, using default\n", 
+			RlmtMode[pAC->Index]);
+			pAC->RlmtMode = 0;
+		}
+	} else {
+		pAC->RlmtMode = 0;
+	}
+	
+	/*
+	** Check the interrupt moderation parameters
+	*/
+	if (Moderation[pAC->Index] != NULL) {
+		if (strcmp(Moderation[pAC->Index], "") == 0) {
+			pAC->DynIrqModInfo.IntModTypeSelect = C_INT_MOD_NONE;
+		} else if (strcmp(Moderation[pAC->Index], "Static") == 0) {
+			pAC->DynIrqModInfo.IntModTypeSelect = C_INT_MOD_STATIC;
+		} else if (strcmp(Moderation[pAC->Index], "Dynamic") == 0) {
+			pAC->DynIrqModInfo.IntModTypeSelect = C_INT_MOD_DYNAMIC;
+		} else if (strcmp(Moderation[pAC->Index], "None") == 0) {
+			pAC->DynIrqModInfo.IntModTypeSelect = C_INT_MOD_NONE;
+		} else {
+	   		printk("sk98lin: Illegal value \"%s\" for Moderation.\n"
+				"      Disable interrupt moderation.\n",
+				Moderation[pAC->Index]);
+			pAC->DynIrqModInfo.IntModTypeSelect = C_INT_MOD_NONE;
+		}
+	} else {
+		pAC->DynIrqModInfo.IntModTypeSelect = C_INT_MOD_NONE;
+	}
+
+	if (Stats[pAC->Index] != NULL) {
+		if (strcmp(Stats[pAC->Index], "Yes") == 0) {
+			pAC->DynIrqModInfo.DisplayStats = SK_TRUE;
+		} else {
+			pAC->DynIrqModInfo.DisplayStats = SK_FALSE;
+		}
+	} else {
+		pAC->DynIrqModInfo.DisplayStats = SK_FALSE;
+	}
+
+	if (ModerationMask[pAC->Index] != NULL) {
+		if (strcmp(ModerationMask[pAC->Index], "Rx") == 0) {
+			pAC->DynIrqModInfo.MaskIrqModeration = IRQ_MASK_RX_ONLY;
+		} else if (strcmp(ModerationMask[pAC->Index], "Tx") == 0) {
+			pAC->DynIrqModInfo.MaskIrqModeration = IRQ_MASK_TX_ONLY;
+		} else if (strcmp(ModerationMask[pAC->Index], "Sp") == 0) {
+			pAC->DynIrqModInfo.MaskIrqModeration = IRQ_MASK_SP_ONLY;
+		} else if (strcmp(ModerationMask[pAC->Index], "RxSp") == 0) {
+			pAC->DynIrqModInfo.MaskIrqModeration = IRQ_MASK_SP_RX;
+		} else if (strcmp(ModerationMask[pAC->Index], "SpRx") == 0) {
+			pAC->DynIrqModInfo.MaskIrqModeration = IRQ_MASK_SP_RX;
+		} else if (strcmp(ModerationMask[pAC->Index], "RxTx") == 0) {
+			pAC->DynIrqModInfo.MaskIrqModeration = IRQ_MASK_TX_RX;
+		} else if (strcmp(ModerationMask[pAC->Index], "TxRx") == 0) {
+			pAC->DynIrqModInfo.MaskIrqModeration = IRQ_MASK_TX_RX;
+		} else if (strcmp(ModerationMask[pAC->Index], "TxSp") == 0) {
+			pAC->DynIrqModInfo.MaskIrqModeration = IRQ_MASK_SP_TX;
+		} else if (strcmp(ModerationMask[pAC->Index], "SpTx") == 0) {
+			pAC->DynIrqModInfo.MaskIrqModeration = IRQ_MASK_SP_TX;
+		} else if (strcmp(ModerationMask[pAC->Index], "RxTxSp") == 0) {
+			pAC->DynIrqModInfo.MaskIrqModeration = IRQ_MASK_RX_TX_SP;
+		} else if (strcmp(ModerationMask[pAC->Index], "RxSpTx") == 0) {
+			pAC->DynIrqModInfo.MaskIrqModeration = IRQ_MASK_RX_TX_SP;
+		} else if (strcmp(ModerationMask[pAC->Index], "TxRxSp") == 0) {
+			pAC->DynIrqModInfo.MaskIrqModeration = IRQ_MASK_RX_TX_SP;
+		} else if (strcmp(ModerationMask[pAC->Index], "TxSpRx") == 0) {
+			pAC->DynIrqModInfo.MaskIrqModeration = IRQ_MASK_RX_TX_SP;
+		} else if (strcmp(ModerationMask[pAC->Index], "SpTxRx") == 0) {
+			pAC->DynIrqModInfo.MaskIrqModeration = IRQ_MASK_RX_TX_SP;
+		} else if (strcmp(ModerationMask[pAC->Index], "SpRxTx") == 0) {
+			pAC->DynIrqModInfo.MaskIrqModeration = IRQ_MASK_RX_TX_SP;
+		} else { /* some rubbish */
+			pAC->DynIrqModInfo.MaskIrqModeration = IRQ_MASK_RX_ONLY;
+		}
+	} else {  /* operator has stated nothing */
+		pAC->DynIrqModInfo.MaskIrqModeration = IRQ_MASK_TX_RX;
+	}
+
+	if (AutoSizing[pAC->Index] != NULL) {
+		if (strcmp(AutoSizing[pAC->Index], "On") == 0) {
+			pAC->DynIrqModInfo.AutoSizing = SK_FALSE;
+		} else {
+			pAC->DynIrqModInfo.AutoSizing = SK_FALSE;
+		}
+	} else {  /* operator has stated nothing */
+		pAC->DynIrqModInfo.AutoSizing = SK_FALSE;
+	}
+
+	if (IntsPerSec[pAC->Index] != 0) {
+		if ((IntsPerSec[pAC->Index]< C_INT_MOD_IPS_LOWER_RANGE) || 
+			(IntsPerSec[pAC->Index] > C_INT_MOD_IPS_UPPER_RANGE)) {
+	   		printk("sk98lin: Illegal value \"%d\" for IntsPerSec. (Range: %d - %d)\n"
+				"      Using default value of %i.\n", 
+				IntsPerSec[pAC->Index],
+				C_INT_MOD_IPS_LOWER_RANGE,
+				C_INT_MOD_IPS_UPPER_RANGE,
+				C_INTS_PER_SEC_DEFAULT);
+			pAC->DynIrqModInfo.MaxModIntsPerSec = C_INTS_PER_SEC_DEFAULT;
+		} else {
+			pAC->DynIrqModInfo.MaxModIntsPerSec = IntsPerSec[pAC->Index];
+		}
+	} else {
+		pAC->DynIrqModInfo.MaxModIntsPerSec = C_INTS_PER_SEC_DEFAULT;
+	}
+
+	/*
+	** Evaluate upper and lower moderation threshold
+	*/
+	pAC->DynIrqModInfo.MaxModIntsPerSecUpperLimit =
+		pAC->DynIrqModInfo.MaxModIntsPerSec +
+		(pAC->DynIrqModInfo.MaxModIntsPerSec / 2);
+
+	pAC->DynIrqModInfo.MaxModIntsPerSecLowerLimit =
+		pAC->DynIrqModInfo.MaxModIntsPerSec -
+		(pAC->DynIrqModInfo.MaxModIntsPerSec / 2);
+
+	pAC->DynIrqModInfo.PrevTimeVal = jiffies;  /* initial value */
+
+
+} /* GetConfiguration */
+
+
+/*****************************************************************************
+ *
+ * 	ProductStr - return a adapter identification string from vpd
+ *
+ * Description:
+ *	This function reads the product name string from the vpd area
+ *	and puts it the field pAC->DeviceString.
+ *
+ * Returns: N/A
+ */
+static inline int ProductStr(
+	SK_AC	*pAC,		/* pointer to adapter context */
+	char    *DeviceStr,	/* result string */
+	int      StrLen		/* length of the string */
+)
+{
+char	Keyword[] = VPD_NAME;	/* vpd productname identifier */
+int	ReturnCode;		/* return code from vpd_read */
+unsigned long Flags;
+
+	spin_lock_irqsave(&pAC->SlowPathLock, Flags);
+	ReturnCode = VpdRead(pAC, pAC->IoBase, Keyword, DeviceStr, &StrLen);
+	spin_unlock_irqrestore(&pAC->SlowPathLock, Flags);
+
+	return ReturnCode;
+} /* ProductStr */
+
+/*****************************************************************************
+ *
+ *      StartDrvCleanupTimer - Start timer to check for descriptors which
+ *                             might be placed in descriptor ring, but
+ *                             havent been handled up to now
+ *
+ * Description:
+ *      This function requests a HW-timer fo the Yukon card. The actions to
+ *      perform when this timer expires, are located in the SkDrvEvent().
+ *
+ * Returns: N/A
+ */
+static void
+StartDrvCleanupTimer(SK_AC *pAC) {
+    SK_EVPARA    EventParam;   /* Event struct for timer event */
+
+    SK_MEMSET((char *) &EventParam, 0, sizeof(EventParam));
+    EventParam.Para32[0] = SK_DRV_RX_CLEANUP_TIMER;
+    SkTimerStart(pAC, pAC->IoBase, &pAC->DrvCleanupTimer,
+                 SK_DRV_RX_CLEANUP_TIMER_LENGTH,
+                 SKGE_DRV, SK_DRV_TIMER, EventParam);
+}
+
+/*****************************************************************************
+ *
+ *      StopDrvCleanupTimer - Stop timer to check for descriptors
+ *
+ * Description:
+ *      This function requests a HW-timer fo the Yukon card. The actions to
+ *      perform when this timer expires, are located in the SkDrvEvent().
+ *
+ * Returns: N/A
+ */
+static void
+StopDrvCleanupTimer(SK_AC *pAC) {
+    SkTimerStop(pAC, pAC->IoBase, &pAC->DrvCleanupTimer);
+    SK_MEMSET((char *) &pAC->DrvCleanupTimer, 0, sizeof(SK_TIMER));
+}
+
+/****************************************************************************/
+/* functions for common modules *********************************************/
+/****************************************************************************/
+
+
+/*****************************************************************************
+ *
+ *	SkDrvAllocRlmtMbuf - allocate an RLMT mbuf
+ *
+ * Description:
+ *	This routine returns an RLMT mbuf or NULL. The RLMT Mbuf structure
+ *	is embedded into a socket buff data area.
+ *
+ * Context:
+ *	runtime
+ *
+ * Returns:
+ *	NULL or pointer to Mbuf.
+ */
+SK_MBUF *SkDrvAllocRlmtMbuf(
+SK_AC		*pAC,		/* pointer to adapter context */
+SK_IOC		IoC,		/* the IO-context */
+unsigned	BufferSize)	/* size of the requested buffer */
+{
+SK_MBUF		*pRlmtMbuf;	/* pointer to a new rlmt-mbuf structure */
+struct sk_buff	*pMsgBlock;	/* pointer to a new message block */
+
+	pMsgBlock = alloc_skb(BufferSize + sizeof(SK_MBUF), GFP_ATOMIC);
+	if (pMsgBlock == NULL) {
+		return (NULL);
+	}
+	pRlmtMbuf = (SK_MBUF*) pMsgBlock->data;
+	skb_reserve(pMsgBlock, sizeof(SK_MBUF));
+	pRlmtMbuf->pNext = NULL;
+	pRlmtMbuf->pOs = pMsgBlock;
+	pRlmtMbuf->pData = pMsgBlock->data;	/* Data buffer. */
+	pRlmtMbuf->Size = BufferSize;		/* Data buffer size. */
+	pRlmtMbuf->Length = 0;		/* Length of packet (<= Size). */
+	return (pRlmtMbuf);
+
+} /* SkDrvAllocRlmtMbuf */
+
+
+/*****************************************************************************
+ *
+ *	SkDrvFreeRlmtMbuf - free an RLMT mbuf
+ *
+ * Description:
+ *	This routine frees one or more RLMT mbuf(s).
+ *
+ * Context:
+ *	runtime
+ *
+ * Returns:
+ *	Nothing
+ */
+void  SkDrvFreeRlmtMbuf(
+SK_AC		*pAC,		/* pointer to adapter context */
+SK_IOC		IoC,		/* the IO-context */
+SK_MBUF		*pMbuf)		/* size of the requested buffer */
+{
+SK_MBUF		*pFreeMbuf;
+SK_MBUF		*pNextMbuf;
+
+	pFreeMbuf = pMbuf;
+	do {
+		pNextMbuf = pFreeMbuf->pNext;
+		DEV_KFREE_SKB_ANY(pFreeMbuf->pOs);
+		pFreeMbuf = pNextMbuf;
+	} while ( pFreeMbuf != NULL );
+} /* SkDrvFreeRlmtMbuf */
+
+
+/*****************************************************************************
+ *
+ *	SkOsGetTime - provide a time value
+ *
+ * Description:
+ *	This routine provides a time value. The unit is 1/HZ (defined by Linux).
+ *	It is not used for absolute time, but only for time differences.
+ *
+ *
+ * Returns:
+ *	Time value
+ */
+SK_U64 SkOsGetTime(SK_AC *pAC)
+{
+	SK_U64	PrivateJiffies;
+	SkOsGetTimeCurrent(pAC, &PrivateJiffies);
+	return PrivateJiffies;
+} /* SkOsGetTime */
+
+
+/*****************************************************************************
+ *
+ *	SkPciReadCfgDWord - read a 32 bit value from pci config space
+ *
+ * Description:
+ *	This routine reads a 32 bit value from the pci configuration
+ *	space.
+ *
+ * Returns:
+ *	0 - indicate everything worked ok.
+ *	!= 0 - error indication
+ */
+int SkPciReadCfgDWord(
+SK_AC *pAC,		/* Adapter Control structure pointer */
+int PciAddr,		/* PCI register address */
+SK_U32 *pVal)		/* pointer to store the read value */
+{
+	pci_read_config_dword(pAC->PciDev, PciAddr, pVal);
+	return(0);
+} /* SkPciReadCfgDWord */
+
+
+/*****************************************************************************
+ *
+ *	SkPciReadCfgWord - read a 16 bit value from pci config space
+ *
+ * Description:
+ *	This routine reads a 16 bit value from the pci configuration
+ *	space.
+ *
+ * Returns:
+ *	0 - indicate everything worked ok.
+ *	!= 0 - error indication
+ */
+int SkPciReadCfgWord(
+SK_AC *pAC,	/* Adapter Control structure pointer */
+int PciAddr,		/* PCI register address */
+SK_U16 *pVal)		/* pointer to store the read value */
+{
+	pci_read_config_word(pAC->PciDev, PciAddr, pVal);
+	return(0);
+} /* SkPciReadCfgWord */
+
+
+/*****************************************************************************
+ *
+ *	SkPciReadCfgByte - read a 8 bit value from pci config space
+ *
+ * Description:
+ *	This routine reads a 8 bit value from the pci configuration
+ *	space.
+ *
+ * Returns:
+ *	0 - indicate everything worked ok.
+ *	!= 0 - error indication
+ */
+int SkPciReadCfgByte(
+SK_AC *pAC,	/* Adapter Control structure pointer */
+int PciAddr,		/* PCI register address */
+SK_U8 *pVal)		/* pointer to store the read value */
+{
+	pci_read_config_byte(pAC->PciDev, PciAddr, pVal);
+	return(0);
+} /* SkPciReadCfgByte */
+
+
+/*****************************************************************************
+ *
+ *	SkPciWriteCfgWord - write a 16 bit value to pci config space
+ *
+ * Description:
+ *	This routine writes a 16 bit value to the pci configuration
+ *	space. The flag PciConfigUp indicates whether the config space
+ *	is accesible or must be set up first.
+ *
+ * Returns:
+ *	0 - indicate everything worked ok.
+ *	!= 0 - error indication
+ */
+int SkPciWriteCfgWord(
+SK_AC *pAC,	/* Adapter Control structure pointer */
+int PciAddr,		/* PCI register address */
+SK_U16 Val)		/* pointer to store the read value */
+{
+	pci_write_config_word(pAC->PciDev, PciAddr, Val);
+	return(0);
+} /* SkPciWriteCfgWord */
+
+
+/*****************************************************************************
+ *
+ *	SkPciWriteCfgWord - write a 8 bit value to pci config space
+ *
+ * Description:
+ *	This routine writes a 8 bit value to the pci configuration
+ *	space. The flag PciConfigUp indicates whether the config space
+ *	is accesible or must be set up first.
+ *
+ * Returns:
+ *	0 - indicate everything worked ok.
+ *	!= 0 - error indication
+ */
+int SkPciWriteCfgByte(
+SK_AC *pAC,	/* Adapter Control structure pointer */
+int PciAddr,		/* PCI register address */
+SK_U8 Val)		/* pointer to store the read value */
+{
+	pci_write_config_byte(pAC->PciDev, PciAddr, Val);
+	return(0);
+} /* SkPciWriteCfgByte */
+
+
+/*****************************************************************************
+ *
+ *	SkDrvEvent - handle driver events
+ *
+ * Description:
+ *	This function handles events from all modules directed to the driver
+ *
+ * Context:
+ *	Is called under protection of slow path lock.
+ *
+ * Returns:
+ *	0 if everything ok
+ *	< 0  on error
+ *	
+ */
+int SkDrvEvent(
+SK_AC *pAC,		/* pointer to adapter context */
+SK_IOC IoC,		/* io-context */
+SK_U32 Event,		/* event-id */
+SK_EVPARA Param)	/* event-parameter */
+{
+SK_MBUF		*pRlmtMbuf;	/* pointer to a rlmt-mbuf structure */
+struct sk_buff	*pMsg;		/* pointer to a message block */
+int		FromPort;	/* the port from which we switch away */
+int		ToPort;		/* the port we switch to */
+SK_EVPARA	NewPara;	/* parameter for further events */
+int		Stat;
+unsigned long	Flags;
+SK_BOOL		DualNet;
+
+	switch (Event) {
+	case SK_DRV_ADAP_FAIL:
+		SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_EVENT,
+			("ADAPTER FAIL EVENT\n"));
+		printk("%s: Adapter failed.\n", pAC->dev[0]->name);
+		/* disable interrupts */
+		SK_OUT32(pAC->IoBase, B0_IMSK, 0);
+		/* cgoos */
+		break;
+	case SK_DRV_PORT_FAIL:
+		FromPort = Param.Para32[0];
+		SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_EVENT,
+			("PORT FAIL EVENT, Port: %d\n", FromPort));
+		if (FromPort == 0) {
+			printk("%s: Port A failed.\n", pAC->dev[0]->name);
+		} else {
+			printk("%s: Port B failed.\n", pAC->dev[1]->name);
+		}
+		/* cgoos */
+		break;
+	case SK_DRV_PORT_RESET:	 /* SK_U32 PortIdx */
+		/* action list 4 */
+		FromPort = Param.Para32[0];
+		SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_EVENT,
+			("PORT RESET EVENT, Port: %d ", FromPort));
+		NewPara.Para64 = FromPort;
+		SkPnmiEvent(pAC, IoC, SK_PNMI_EVT_XMAC_RESET, NewPara);
+		spin_lock_irqsave(
+			&pAC->TxPort[FromPort][TX_PRIO_LOW].TxDesRingLock,
+			Flags);
+
+		SkGeStopPort(pAC, IoC, FromPort, SK_STOP_ALL, SK_HARD_RST);
+		netif_carrier_off(pAC->dev[Param.Para32[0]]);
+		spin_unlock_irqrestore(
+			&pAC->TxPort[FromPort][TX_PRIO_LOW].TxDesRingLock,
+			Flags);
+		
+		/* clear rx ring from received frames */
+		ReceiveIrq(pAC, &pAC->RxPort[FromPort], SK_FALSE);
+		
+		ClearTxRing(pAC, &pAC->TxPort[FromPort][TX_PRIO_LOW]);
+		spin_lock_irqsave(
+			&pAC->TxPort[FromPort][TX_PRIO_LOW].TxDesRingLock,
+			Flags);
+		
+		/* tschilling: Handling of return value inserted. */
+		if (SkGeInitPort(pAC, IoC, FromPort)) {
+			if (FromPort == 0) {
+				printk("%s: SkGeInitPort A failed.\n", pAC->dev[0]->name);
+			} else {
+				printk("%s: SkGeInitPort B failed.\n", pAC->dev[1]->name);
+			}
+		}
+		SkAddrMcUpdate(pAC,IoC, FromPort);
+		PortReInitBmu(pAC, FromPort);
+		SkGePollTxD(pAC, IoC, FromPort, SK_TRUE);
+		ClearAndStartRx(pAC, FromPort);
+		spin_unlock_irqrestore(
+			&pAC->TxPort[FromPort][TX_PRIO_LOW].TxDesRingLock,
+			Flags);
+		break;
+	case SK_DRV_NET_UP:	 /* SK_U32 PortIdx */
+	{	struct net_device *dev = pAC->dev[Param.Para32[0]];
+		/* action list 5 */
+		FromPort = Param.Para32[0];
+		SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_EVENT,
+			("NET UP EVENT, Port: %d ", Param.Para32[0]));
+		/* Mac update */
+		SkAddrMcUpdate(pAC,IoC, FromPort);
+
+		if (DoPrintInterfaceChange) {
+		printk("%s: network connection up using"
+			" port %c\n", pAC->dev[Param.Para32[0]]->name, 'A'+Param.Para32[0]);
+
+		/* tschilling: Values changed according to LinkSpeedUsed. */
+		Stat = pAC->GIni.GP[FromPort].PLinkSpeedUsed;
+		if (Stat == SK_LSPEED_STAT_10MBPS) {
+			printk("    speed:           10\n");
+		} else if (Stat == SK_LSPEED_STAT_100MBPS) {
+			printk("    speed:           100\n");
+		} else if (Stat == SK_LSPEED_STAT_1000MBPS) {
+			printk("    speed:           1000\n");
+		} else {
+			printk("    speed:           unknown\n");
+		}
+
+
+		Stat = pAC->GIni.GP[FromPort].PLinkModeStatus;
+		if (Stat == SK_LMODE_STAT_AUTOHALF ||
+			Stat == SK_LMODE_STAT_AUTOFULL) {
+			printk("    autonegotiation: yes\n");
+		}
+		else {
+			printk("    autonegotiation: no\n");
+		}
+		if (Stat == SK_LMODE_STAT_AUTOHALF ||
+			Stat == SK_LMODE_STAT_HALF) {
+			printk("    duplex mode:     half\n");
+		}
+		else {
+			printk("    duplex mode:     full\n");
+		}
+		Stat = pAC->GIni.GP[FromPort].PFlowCtrlStatus;
+		if (Stat == SK_FLOW_STAT_REM_SEND ) {
+			printk("    flowctrl:        remote send\n");
+		}
+		else if (Stat == SK_FLOW_STAT_LOC_SEND ){
+			printk("    flowctrl:        local send\n");
+		}
+		else if (Stat == SK_FLOW_STAT_SYMMETRIC ){
+			printk("    flowctrl:        symmetric\n");
+		}
+		else {
+			printk("    flowctrl:        none\n");
+		}
+		
+		/* tschilling: Check against CopperType now. */
+		if ((pAC->GIni.GICopperType == SK_TRUE) &&
+			(pAC->GIni.GP[FromPort].PLinkSpeedUsed ==
+			SK_LSPEED_STAT_1000MBPS)) {
+			Stat = pAC->GIni.GP[FromPort].PMSStatus;
+			if (Stat == SK_MS_STAT_MASTER ) {
+				printk("    role:            master\n");
+			}
+			else if (Stat == SK_MS_STAT_SLAVE ) {
+				printk("    role:            slave\n");
+			}
+			else {
+				printk("    role:            ???\n");
+			}
+		}
+
+		/* 
+		   Display dim (dynamic interrupt moderation) 
+		   informations
+		 */
+		if (pAC->DynIrqModInfo.IntModTypeSelect == C_INT_MOD_STATIC)
+			printk("    irq moderation:  static (%d ints/sec)\n",
+					pAC->DynIrqModInfo.MaxModIntsPerSec);
+		else if (pAC->DynIrqModInfo.IntModTypeSelect == C_INT_MOD_DYNAMIC)
+			printk("    irq moderation:  dynamic (%d ints/sec)\n",
+					pAC->DynIrqModInfo.MaxModIntsPerSec);
+		else
+			printk("    irq moderation:  disabled\n");
+
+
+		printk("    scatter-gather:  %s\n",
+		       (dev->features & NETIF_F_SG) ? "enabled" : "disabled");
+		printk("    tx-checksum:     %s\n",
+		       (dev->features & NETIF_F_IP_CSUM) ? "enabled" : "disabled");
+		printk("    rx-checksum:     %s\n",
+		       pAC->RxPort[Param.Para32[0]].RxCsum ? "enabled" : "disabled");
+
+		} else {
+                        DoPrintInterfaceChange = SK_TRUE;
+                }
+	
+		if ((Param.Para32[0] != pAC->ActivePort) &&
+			(pAC->RlmtNets == 1)) {
+			NewPara.Para32[0] = pAC->ActivePort;
+			NewPara.Para32[1] = Param.Para32[0];
+			SkEventQueue(pAC, SKGE_DRV, SK_DRV_SWITCH_INTERN,
+				NewPara);
+		}
+
+		/* Inform the world that link protocol is up. */
+		netif_carrier_on(dev);
+		break;
+	}
+	case SK_DRV_NET_DOWN:	 /* SK_U32 Reason */
+		/* action list 7 */
+		SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_EVENT,
+			("NET DOWN EVENT "));
+		if (DoPrintInterfaceChange) {
+			printk("%s: network connection down\n", 
+				pAC->dev[Param.Para32[1]]->name);
+		} else {
+			DoPrintInterfaceChange = SK_TRUE;
+		}
+		netif_carrier_off(pAC->dev[Param.Para32[1]]);
+		break;
+	case SK_DRV_SWITCH_HARD: /* SK_U32 FromPortIdx SK_U32 ToPortIdx */
+		SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_EVENT,
+			("PORT SWITCH HARD "));
+	case SK_DRV_SWITCH_SOFT: /* SK_U32 FromPortIdx SK_U32 ToPortIdx */
+	/* action list 6 */
+		printk("%s: switching to port %c\n", pAC->dev[0]->name,
+			'A'+Param.Para32[1]);
+	case SK_DRV_SWITCH_INTERN: /* SK_U32 FromPortIdx SK_U32 ToPortIdx */
+		FromPort = Param.Para32[0];
+		ToPort = Param.Para32[1];
+		SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_EVENT,
+			("PORT SWITCH EVENT, From: %d  To: %d (Pref %d) ",
+			FromPort, ToPort, pAC->Rlmt.Net[0].PrefPort));
+		NewPara.Para64 = FromPort;
+		SkPnmiEvent(pAC, IoC, SK_PNMI_EVT_XMAC_RESET, NewPara);
+		NewPara.Para64 = ToPort;
+		SkPnmiEvent(pAC, IoC, SK_PNMI_EVT_XMAC_RESET, NewPara);
+		spin_lock_irqsave(
+			&pAC->TxPort[FromPort][TX_PRIO_LOW].TxDesRingLock,
+			Flags);
+		spin_lock(&pAC->TxPort[ToPort][TX_PRIO_LOW].TxDesRingLock);
+		SkGeStopPort(pAC, IoC, FromPort, SK_STOP_ALL, SK_SOFT_RST);
+		SkGeStopPort(pAC, IoC, ToPort, SK_STOP_ALL, SK_SOFT_RST);
+		spin_unlock(&pAC->TxPort[ToPort][TX_PRIO_LOW].TxDesRingLock);
+		spin_unlock_irqrestore(
+			&pAC->TxPort[FromPort][TX_PRIO_LOW].TxDesRingLock,
+			Flags);
+
+		ReceiveIrq(pAC, &pAC->RxPort[FromPort], SK_FALSE); /* clears rx ring */
+		ReceiveIrq(pAC, &pAC->RxPort[ToPort], SK_FALSE); /* clears rx ring */
+		
+		ClearTxRing(pAC, &pAC->TxPort[FromPort][TX_PRIO_LOW]);
+		ClearTxRing(pAC, &pAC->TxPort[ToPort][TX_PRIO_LOW]);
+		spin_lock_irqsave(
+			&pAC->TxPort[FromPort][TX_PRIO_LOW].TxDesRingLock,
+			Flags);
+		spin_lock(&pAC->TxPort[ToPort][TX_PRIO_LOW].TxDesRingLock);
+		pAC->ActivePort = ToPort;
+#if 0
+		SetQueueSizes(pAC);
+#else
+		/* tschilling: New common function with minimum size check. */
+		DualNet = SK_FALSE;
+		if (pAC->RlmtNets == 2) {
+			DualNet = SK_TRUE;
+		}
+		
+		if (SkGeInitAssignRamToQueues(
+			pAC,
+			pAC->ActivePort,
+			DualNet)) {
+			spin_unlock(&pAC->TxPort[ToPort][TX_PRIO_LOW].TxDesRingLock);
+			spin_unlock_irqrestore(
+				&pAC->TxPort[FromPort][TX_PRIO_LOW].TxDesRingLock,
+				Flags);
+			printk("SkGeInitAssignRamToQueues failed.\n");
+			break;
+		}
+#endif
+		/* tschilling: Handling of return values inserted. */
+		if (SkGeInitPort(pAC, IoC, FromPort) ||
+			SkGeInitPort(pAC, IoC, ToPort)) {
+			printk("%s: SkGeInitPort failed.\n", pAC->dev[0]->name);
+		}
+		if (Event == SK_DRV_SWITCH_SOFT) {
+			SkMacRxTxEnable(pAC, IoC, FromPort);
+		}
+		SkMacRxTxEnable(pAC, IoC, ToPort);
+		SkAddrSwap(pAC, IoC, FromPort, ToPort);
+		SkAddrMcUpdate(pAC, IoC, FromPort);
+		SkAddrMcUpdate(pAC, IoC, ToPort);
+		PortReInitBmu(pAC, FromPort);
+		PortReInitBmu(pAC, ToPort);
+		SkGePollTxD(pAC, IoC, FromPort, SK_TRUE);
+		SkGePollTxD(pAC, IoC, ToPort, SK_TRUE);
+		ClearAndStartRx(pAC, FromPort);
+		ClearAndStartRx(pAC, ToPort);
+		spin_unlock(&pAC->TxPort[ToPort][TX_PRIO_LOW].TxDesRingLock);
+		spin_unlock_irqrestore(
+			&pAC->TxPort[FromPort][TX_PRIO_LOW].TxDesRingLock,
+			Flags);
+		break;
+	case SK_DRV_RLMT_SEND:	 /* SK_MBUF *pMb */
+		SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_EVENT,
+			("RLS "));
+		pRlmtMbuf = (SK_MBUF*) Param.pParaPtr;
+		pMsg = (struct sk_buff*) pRlmtMbuf->pOs;
+		skb_put(pMsg, pRlmtMbuf->Length);
+		if (XmitFrame(pAC, &pAC->TxPort[pRlmtMbuf->PortIdx][TX_PRIO_LOW],
+			pMsg) < 0)
+
+			DEV_KFREE_SKB_ANY(pMsg);
+		break;
+	case SK_DRV_TIMER:
+		if (Param.Para32[0] == SK_DRV_MODERATION_TIMER) {
+			/*
+			** expiration of the moderation timer implies that
+			** dynamic moderation is to be applied
+			*/
+			SkDimStartModerationTimer(pAC);
+			SkDimModerate(pAC);
+                        if (pAC->DynIrqModInfo.DisplayStats) {
+			    SkDimDisplayModerationSettings(pAC);
+                        }
+                } else if (Param.Para32[0] == SK_DRV_RX_CLEANUP_TIMER) {
+			/*
+			** check if we need to check for descriptors which
+			** haven't been handled the last millisecs
+			*/
+			StartDrvCleanupTimer(pAC);
+			if (pAC->GIni.GIMacsFound == 2) {
+				ReceiveIrq(pAC, &pAC->RxPort[1], SK_FALSE);
+			}
+			ReceiveIrq(pAC, &pAC->RxPort[0], SK_FALSE);
+		} else {
+			printk("Expiration of unknown timer\n");
+		}
+		break;
+	default:
+		break;
+	}
+	SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_EVENT,
+		("END EVENT "));
+	
+	return (0);
+} /* SkDrvEvent */
+
+
+/*****************************************************************************
+ *
+ *	SkErrorLog - log errors
+ *
+ * Description:
+ *	This function logs errors to the system buffer and to the console
+ *
+ * Returns:
+ *	0 if everything ok
+ *	< 0  on error
+ *	
+ */
+void SkErrorLog(
+SK_AC	*pAC,
+int	ErrClass,
+int	ErrNum,
+char	*pErrorMsg)
+{
+char	ClassStr[80];
+
+	switch (ErrClass) {
+	case SK_ERRCL_OTHER:
+		strcpy(ClassStr, "Other error");
+		break;
+	case SK_ERRCL_CONFIG:
+		strcpy(ClassStr, "Configuration error");
+		break;
+	case SK_ERRCL_INIT:
+		strcpy(ClassStr, "Initialization error");
+		break;
+	case SK_ERRCL_NORES:
+		strcpy(ClassStr, "Out of resources error");
+		break;
+	case SK_ERRCL_SW:
+		strcpy(ClassStr, "internal Software error");
+		break;
+	case SK_ERRCL_HW:
+		strcpy(ClassStr, "Hardware failure");
+		break;
+	case SK_ERRCL_COMM:
+		strcpy(ClassStr, "Communication error");
+		break;
+	}
+	printk(KERN_INFO "%s: -- ERROR --\n        Class:  %s\n"
+		"        Nr:  0x%x\n        Msg:  %s\n", pAC->dev[0]->name,
+		ClassStr, ErrNum, pErrorMsg);
+
+} /* SkErrorLog */
+
+#ifdef SK_DIAG_SUPPORT
+
+/*****************************************************************************
+ *
+ *	SkDrvEnterDiagMode - handles DIAG attach request
+ *
+ * Description:
+ *	Notify the kernel to NOT access the card any longer due to DIAG
+ *	Deinitialize the Card
+ *
+ * Returns:
+ *	int
+ */
+int SkDrvEnterDiagMode(
+SK_AC   *pAc)   /* pointer to adapter context */
+{
+	DEV_NET *pNet = netdev_priv(pAc->dev[0]);
+	SK_AC   *pAC  = pNet->pAC;
+
+	SK_MEMCPY(&(pAc->PnmiBackup), &(pAc->PnmiStruct), 
+			sizeof(SK_PNMI_STRUCT_DATA));
+
+	pAC->DiagModeActive = DIAG_ACTIVE;
+	if (pAC->BoardLevel > SK_INIT_DATA) {
+		if (netif_running(pAC->dev[0])) {
+			pAC->WasIfUp[0] = SK_TRUE;
+			pAC->DiagFlowCtrl = SK_TRUE; /* for SkGeClose      */
+			DoPrintInterfaceChange = SK_FALSE;
+			SkDrvDeInitAdapter(pAC, 0);  /* performs SkGeClose */
+		} else {
+			pAC->WasIfUp[0] = SK_FALSE;
+		}
+		if (pNet != netdev_priv(pAC->dev[1])) {
+			pNet = netdev_priv(pAC->dev[1]);
+			if (netif_running(pAC->dev[1])) {
+				pAC->WasIfUp[1] = SK_TRUE;
+				pAC->DiagFlowCtrl = SK_TRUE; /* for SkGeClose */
+				DoPrintInterfaceChange = SK_FALSE;
+				SkDrvDeInitAdapter(pAC, 1);  /* do SkGeClose  */
+			} else {
+				pAC->WasIfUp[1] = SK_FALSE;
+			}
+		}
+		pAC->BoardLevel = SK_INIT_DATA;
+	}
+	return(0);
+}
+
+/*****************************************************************************
+ *
+ *	SkDrvLeaveDiagMode - handles DIAG detach request
+ *
+ * Description:
+ *	Notify the kernel to may access the card again after use by DIAG
+ *	Initialize the Card
+ *
+ * Returns:
+ * 	int
+ */
+int SkDrvLeaveDiagMode(
+SK_AC   *pAc)   /* pointer to adapter control context */
+{ 
+	SK_MEMCPY(&(pAc->PnmiStruct), &(pAc->PnmiBackup), 
+			sizeof(SK_PNMI_STRUCT_DATA));
+	pAc->DiagModeActive    = DIAG_NOTACTIVE;
+	pAc->Pnmi.DiagAttached = SK_DIAG_IDLE;
+        if (pAc->WasIfUp[0] == SK_TRUE) {
+                pAc->DiagFlowCtrl = SK_TRUE; /* for SkGeClose */
+		DoPrintInterfaceChange = SK_FALSE;
+                SkDrvInitAdapter(pAc, 0);    /* first device  */
+        }
+        if (pAc->WasIfUp[1] == SK_TRUE) {
+                pAc->DiagFlowCtrl = SK_TRUE; /* for SkGeClose */
+		DoPrintInterfaceChange = SK_FALSE;
+                SkDrvInitAdapter(pAc, 1);    /* second device */
+        }
+	return(0);
+}
+
+/*****************************************************************************
+ *
+ *	ParseDeviceNbrFromSlotName - Evaluate PCI device number
+ *
+ * Description:
+ * 	This function parses the PCI slot name information string and will
+ *	retrieve the devcie number out of it. The slot_name maintianed by
+ *	linux is in the form of '02:0a.0', whereas the first two characters 
+ *	represent the bus number in hex (in the sample above this is 
+ *	pci bus 0x02) and the next two characters the device number (0x0a).
+ *
+ * Returns:
+ *	SK_U32: The device number from the PCI slot name
+ */ 
+
+static SK_U32 ParseDeviceNbrFromSlotName(
+const char *SlotName)   /* pointer to pci slot name eg. '02:0a.0' */
+{
+	char	*CurrCharPos	= (char *) SlotName;
+	int	FirstNibble	= -1;
+	int	SecondNibble	= -1;
+	SK_U32	Result		=  0;
+
+	while (*CurrCharPos != '\0') {
+		if (*CurrCharPos == ':') { 
+			while (*CurrCharPos != '.') {
+				CurrCharPos++;  
+				if (	(*CurrCharPos >= '0') && 
+					(*CurrCharPos <= '9')) {
+					if (FirstNibble == -1) {
+						/* dec. value for '0' */
+						FirstNibble = *CurrCharPos - 48;
+					} else {
+						SecondNibble = *CurrCharPos - 48;
+					}  
+				} else if (	(*CurrCharPos >= 'a') && 
+						(*CurrCharPos <= 'f')  ) {
+					if (FirstNibble == -1) {
+						FirstNibble = *CurrCharPos - 87; 
+					} else {
+						SecondNibble = *CurrCharPos - 87; 
+					}
+				} else {
+					Result = 0;
+				}
+			}
+
+			Result = FirstNibble;
+			Result = Result << 4; /* first nibble is higher one */
+			Result = Result | SecondNibble;
+		}
+		CurrCharPos++;   /* next character */
+	}
+	return (Result);
+}
+
+/****************************************************************************
+ *
+ *	SkDrvDeInitAdapter - deinitialize adapter (this function is only 
+ *				called if Diag attaches to that card)
+ *
+ * Description:
+ *	Close initialized adapter.
+ *
+ * Returns:
+ *	0 - on success
+ *	error code - on error
+ */
+static int SkDrvDeInitAdapter(
+SK_AC   *pAC,		/* pointer to adapter context   */
+int      devNbr)	/* what device is to be handled */
+{
+	struct SK_NET_DEVICE *dev;
+
+	dev = pAC->dev[devNbr];
+
+	/* On Linux 2.6 the network driver does NOT mess with reference
+	** counts.  The driver MUST be able to be unloaded at any time
+	** due to the possibility of hotplug.
+	*/
+	if (SkGeClose(dev) != 0) {
+		return (-1);
+	}
+	return (0);
+
+} /* SkDrvDeInitAdapter() */
+
+/****************************************************************************
+ *
+ *	SkDrvInitAdapter - Initialize adapter (this function is only 
+ *				called if Diag deattaches from that card)
+ *
+ * Description:
+ *	Close initialized adapter.
+ *
+ * Returns:
+ *	0 - on success
+ *	error code - on error
+ */
+static int SkDrvInitAdapter(
+SK_AC   *pAC,		/* pointer to adapter context   */
+int      devNbr)	/* what device is to be handled */
+{
+	struct SK_NET_DEVICE *dev;
+
+	dev = pAC->dev[devNbr];
+
+	if (SkGeOpen(dev) != 0) {
+		return (-1);
+	}
+
+	/*
+	** Use correct MTU size and indicate to kernel TX queue can be started
+	*/ 
+	if (SkGeChangeMtu(dev, dev->mtu) != 0) {
+		return (-1);
+	} 
+	return (0);
+
+} /* SkDrvInitAdapter */
+
+#endif
+
+#ifdef DEBUG
+/****************************************************************************/
+/* "debug only" section *****************************************************/
+/****************************************************************************/
+
+
+/*****************************************************************************
+ *
+ *	DumpMsg - print a frame
+ *
+ * Description:
+ *	This function prints frames to the system logfile/to the console.
+ *
+ * Returns: N/A
+ *	
+ */
+static void DumpMsg(struct sk_buff *skb, char *str)
+{
+	int	msglen;
+
+	if (skb == NULL) {
+		printk("DumpMsg(): NULL-Message\n");
+		return;
+	}
+
+	if (skb->data == NULL) {
+		printk("DumpMsg(): Message empty\n");
+		return;
+	}
+
+	msglen = skb->len;
+	if (msglen > 64)
+		msglen = 64;
+
+	printk("--- Begin of message from %s , len %d (from %d) ----\n", str, msglen, skb->len);
+
+	DumpData((char *)skb->data, msglen);
+
+	printk("------- End of message ---------\n");
+} /* DumpMsg */
+
+
+
+/*****************************************************************************
+ *
+ *	DumpData - print a data area
+ *
+ * Description:
+ *	This function prints a area of data to the system logfile/to the
+ *	console.
+ *
+ * Returns: N/A
+ *	
+ */
+static void DumpData(char *p, int size)
+{
+register int    i;
+int	haddr, addr;
+char	hex_buffer[180];
+char	asc_buffer[180];
+char	HEXCHAR[] = "0123456789ABCDEF";
+
+	addr = 0;
+	haddr = 0;
+	hex_buffer[0] = 0;
+	asc_buffer[0] = 0;
+	for (i=0; i < size; ) {
+		if (*p >= '0' && *p <='z')
+			asc_buffer[addr] = *p;
+		else
+			asc_buffer[addr] = '.';
+		addr++;
+		asc_buffer[addr] = 0;
+		hex_buffer[haddr] = HEXCHAR[(*p & 0xf0) >> 4];
+		haddr++;
+		hex_buffer[haddr] = HEXCHAR[*p & 0x0f];
+		haddr++;
+		hex_buffer[haddr] = ' ';
+		haddr++;
+		hex_buffer[haddr] = 0;
+		p++;
+		i++;
+		if (i%16 == 0) {
+			printk("%s  %s\n", hex_buffer, asc_buffer);
+			addr = 0;
+			haddr = 0;
+		}
+	}
+} /* DumpData */
+
+
+/*****************************************************************************
+ *
+ *	DumpLong - print a data area as long values
+ *
+ * Description:
+ *	This function prints a area of data to the system logfile/to the
+ *	console.
+ *
+ * Returns: N/A
+ *	
+ */
+static void DumpLong(char *pc, int size)
+{
+register int    i;
+int	haddr, addr;
+char	hex_buffer[180];
+char	asc_buffer[180];
+char	HEXCHAR[] = "0123456789ABCDEF";
+long	*p;
+int	l;
+
+	addr = 0;
+	haddr = 0;
+	hex_buffer[0] = 0;
+	asc_buffer[0] = 0;
+	p = (long*) pc;
+	for (i=0; i < size; ) {
+		l = (long) *p;
+		hex_buffer[haddr] = HEXCHAR[(l >> 28) & 0xf];
+		haddr++;
+		hex_buffer[haddr] = HEXCHAR[(l >> 24) & 0xf];
+		haddr++;
+		hex_buffer[haddr] = HEXCHAR[(l >> 20) & 0xf];
+		haddr++;
+		hex_buffer[haddr] = HEXCHAR[(l >> 16) & 0xf];
+		haddr++;
+		hex_buffer[haddr] = HEXCHAR[(l >> 12) & 0xf];
+		haddr++;
+		hex_buffer[haddr] = HEXCHAR[(l >> 8) & 0xf];
+		haddr++;
+		hex_buffer[haddr] = HEXCHAR[(l >> 4) & 0xf];
+		haddr++;
+		hex_buffer[haddr] = HEXCHAR[l & 0x0f];
+		haddr++;
+		hex_buffer[haddr] = ' ';
+		haddr++;
+		hex_buffer[haddr] = 0;
+		p++;
+		i++;
+		if (i%8 == 0) {
+			printk("%4x %s\n", (i-8)*4, hex_buffer);
+			haddr = 0;
+		}
+	}
+	printk("------------------------\n");
+} /* DumpLong */
+
+#endif
+
+static int __devinit skge_probe_one(struct pci_dev *pdev,
+		const struct pci_device_id *ent)
+{
+	SK_AC			*pAC;
+	DEV_NET			*pNet = NULL;
+	struct net_device	*dev = NULL;
+	static int boards_found = 0;
+	int error = -ENODEV;
+	int using_dac = 0;
+	char DeviceStr[80];
+
+	if (pci_enable_device(pdev))
+		goto out;
+ 
+	/* Configure DMA attributes. */
+	if (sizeof(dma_addr_t) > sizeof(u32) &&
+	    !(error = pci_set_dma_mask(pdev, DMA_64BIT_MASK))) {
+		using_dac = 1;
+		error = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK);
+		if (error < 0) {
+			printk(KERN_ERR "sk98lin %s unable to obtain 64 bit DMA "
+			       "for consistent allocations\n", pci_name(pdev));
+			goto out_disable_device;
+		}
+	} else {
+		error = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
+		if (error) {
+			printk(KERN_ERR "sk98lin %s no usable DMA configuration\n",
+			       pci_name(pdev));
+			goto out_disable_device;
+		}
+	}
+
+ 	error = -ENOMEM;
+ 	dev = alloc_etherdev(sizeof(DEV_NET));
+ 	if (!dev) {
+		printk(KERN_ERR "sk98lin: unable to allocate etherdev "
+		       "structure!\n");
+		goto out_disable_device;
+	}
+
+	pNet = netdev_priv(dev);
+	pNet->pAC = kzalloc(sizeof(SK_AC), GFP_KERNEL);
+	if (!pNet->pAC) {
+		printk(KERN_ERR "sk98lin: unable to allocate adapter "
+		       "structure!\n");
+		goto out_free_netdev;
+	}
+
+	pAC = pNet->pAC;
+	pAC->PciDev = pdev;
+
+	pAC->dev[0] = dev;
+	pAC->dev[1] = dev;
+	pAC->CheckQueue = SK_FALSE;
+
+	dev->irq = pdev->irq;
+
+	error = SkGeInitPCI(pAC);
+	if (error) {
+		printk(KERN_ERR "sk98lin: PCI setup failed: %i\n", error);
+		goto out_free_netdev;
+	}
+
+	SET_MODULE_OWNER(dev);
+	dev->open =		&SkGeOpen;
+	dev->stop =		&SkGeClose;
+	dev->hard_start_xmit =	&SkGeXmit;
+	dev->get_stats =	&SkGeStats;
+	dev->set_multicast_list = &SkGeSetRxMode;
+	dev->set_mac_address =	&SkGeSetMacAddr;
+	dev->do_ioctl =		&SkGeIoctl;
+	dev->change_mtu =	&SkGeChangeMtu;
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	dev->poll_controller =	&SkGePollController;
+#endif
+	SET_NETDEV_DEV(dev, &pdev->dev);
+	SET_ETHTOOL_OPS(dev, &SkGeEthtoolOps);
+
+	/* Use only if yukon hardware */
+	if (pAC->ChipsetType) {
+#ifdef USE_SK_TX_CHECKSUM
+		dev->features |= NETIF_F_IP_CSUM;
+#endif
+#ifdef SK_ZEROCOPY
+		dev->features |= NETIF_F_SG;
+#endif
+#ifdef USE_SK_RX_CHECKSUM
+		pAC->RxPort[0].RxCsum = 1;
+#endif
+	}
+
+	if (using_dac)
+		dev->features |= NETIF_F_HIGHDMA;
+
+	pAC->Index = boards_found++;
+
+	error = SkGeBoardInit(dev, pAC);
+	if (error)
+		goto out_free_netdev;
+
+	/* Read Adapter name from VPD */
+	if (ProductStr(pAC, DeviceStr, sizeof(DeviceStr)) != 0) {
+		error = -EIO;
+		printk(KERN_ERR "sk98lin: Could not read VPD data.\n");
+		goto out_free_resources;
+	}
+
+	/* Register net device */
+	error = register_netdev(dev);
+	if (error) {
+		printk(KERN_ERR "sk98lin: Could not register device.\n");
+		goto out_free_resources;
+	}
+
+	/* Print adapter specific string from vpd */
+	printk("%s: %s\n", dev->name, DeviceStr);
+
+	/* Print configuration settings */
+	printk("      PrefPort:%c  RlmtMode:%s\n",
+		'A' + pAC->Rlmt.Net[0].Port[pAC->Rlmt.Net[0].PrefPort]->PortNumber,
+		(pAC->RlmtMode==0)  ? "Check Link State" :
+		((pAC->RlmtMode==1) ? "Check Link State" :
+		((pAC->RlmtMode==3) ? "Check Local Port" :
+		((pAC->RlmtMode==7) ? "Check Segmentation" :
+		((pAC->RlmtMode==17) ? "Dual Check Link State" :"Error")))));
+
+	SkGeYellowLED(pAC, pAC->IoBase, 1);
+
+	memcpy(&dev->dev_addr, &pAC->Addr.Net[0].CurrentMacAddress, 6);
+	memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
+
+	pNet->PortNr = 0;
+	pNet->NetNr  = 0;
+
+	boards_found++;
+
+	pci_set_drvdata(pdev, dev);
+
+	/* More then one port found */
+	if ((pAC->GIni.GIMacsFound == 2 ) && (pAC->RlmtNets == 2)) {
+		dev = alloc_etherdev(sizeof(DEV_NET));
+		if (!dev) {
+			printk(KERN_ERR "sk98lin: unable to allocate etherdev "
+				"structure!\n");
+			goto single_port;
+		}
+
+		pNet          = netdev_priv(dev);
+		pNet->PortNr  = 1;
+		pNet->NetNr   = 1;
+		pNet->pAC     = pAC;
+
+		dev->open               = &SkGeOpen;
+		dev->stop               = &SkGeClose;
+		dev->hard_start_xmit    = &SkGeXmit;
+		dev->get_stats          = &SkGeStats;
+		dev->set_multicast_list = &SkGeSetRxMode;
+		dev->set_mac_address    = &SkGeSetMacAddr;
+		dev->do_ioctl           = &SkGeIoctl;
+		dev->change_mtu         = &SkGeChangeMtu;
+		SET_NETDEV_DEV(dev, &pdev->dev);
+		SET_ETHTOOL_OPS(dev, &SkGeEthtoolOps);
+
+		if (pAC->ChipsetType) {
+#ifdef USE_SK_TX_CHECKSUM
+			dev->features |= NETIF_F_IP_CSUM;
+#endif
+#ifdef SK_ZEROCOPY
+			dev->features |= NETIF_F_SG;
+#endif
+#ifdef USE_SK_RX_CHECKSUM
+			pAC->RxPort[1].RxCsum = 1;
+#endif
+		}
+
+		if (using_dac)
+			dev->features |= NETIF_F_HIGHDMA;
+
+		error = register_netdev(dev);
+		if (error) {
+			printk(KERN_ERR "sk98lin: Could not register device"
+			       " for second port. (%d)\n", error);
+			free_netdev(dev);
+			goto single_port;
+		}
+
+		pAC->dev[1]   = dev;
+		memcpy(&dev->dev_addr,
+		       &pAC->Addr.Net[1].CurrentMacAddress, 6);
+		memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
+
+		printk("%s: %s\n", dev->name, DeviceStr);
+		printk("      PrefPort:B  RlmtMode:Dual Check Link State\n");
+	}
+
+single_port:
+
+	/* Save the hardware revision */
+	pAC->HWRevision = (((pAC->GIni.GIPciHwRev >> 4) & 0x0F)*10) +
+		(pAC->GIni.GIPciHwRev & 0x0F);
+
+	/* Set driver globals */
+	pAC->Pnmi.pDriverFileName    = DRIVER_FILE_NAME;
+	pAC->Pnmi.pDriverReleaseDate = DRIVER_REL_DATE;
+
+	memset(&pAC->PnmiBackup, 0, sizeof(SK_PNMI_STRUCT_DATA));
+	memcpy(&pAC->PnmiBackup, &pAC->PnmiStruct, sizeof(SK_PNMI_STRUCT_DATA));
+
+	return 0;
+
+ out_free_resources:
+	FreeResources(dev);
+ out_free_netdev:
+	free_netdev(dev);
+ out_disable_device:
+	pci_disable_device(pdev);
+ out:
+	return error;
+}
+
+static void __devexit skge_remove_one(struct pci_dev *pdev)
+{
+	struct net_device *dev = pci_get_drvdata(pdev);
+	DEV_NET *pNet = netdev_priv(dev);
+	SK_AC *pAC = pNet->pAC;
+	struct net_device *otherdev = pAC->dev[1];
+
+	unregister_netdev(dev);
+
+	SkGeYellowLED(pAC, pAC->IoBase, 0);
+
+	if (pAC->BoardLevel == SK_INIT_RUN) {
+		SK_EVPARA EvPara;
+		unsigned long Flags;
+
+		/* board is still alive */
+		spin_lock_irqsave(&pAC->SlowPathLock, Flags);
+		EvPara.Para32[0] = 0;
+		EvPara.Para32[1] = -1;
+		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_STOP, EvPara);
+		EvPara.Para32[0] = 1;
+		EvPara.Para32[1] = -1;
+		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_STOP, EvPara);
+		SkEventDispatcher(pAC, pAC->IoBase);
+		/* disable interrupts */
+		SK_OUT32(pAC->IoBase, B0_IMSK, 0);
+		SkGeDeInit(pAC, pAC->IoBase);
+		spin_unlock_irqrestore(&pAC->SlowPathLock, Flags);
+		pAC->BoardLevel = SK_INIT_DATA;
+		/* We do NOT check here, if IRQ was pending, of course*/
+	}
+
+	if (pAC->BoardLevel == SK_INIT_IO) {
+		/* board is still alive */
+		SkGeDeInit(pAC, pAC->IoBase);
+		pAC->BoardLevel = SK_INIT_DATA;
+	}
+
+	FreeResources(dev);
+	free_netdev(dev);
+	if (otherdev != dev)
+		free_netdev(otherdev);
+	kfree(pAC);
+}
+
+#ifdef CONFIG_PM
+static int skge_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+	struct net_device *dev = pci_get_drvdata(pdev);
+	DEV_NET *pNet = netdev_priv(dev);
+	SK_AC *pAC = pNet->pAC;
+	struct net_device *otherdev = pAC->dev[1];
+
+	if (netif_running(dev)) {
+		netif_carrier_off(dev);
+		DoPrintInterfaceChange = SK_FALSE;
+		SkDrvDeInitAdapter(pAC, 0);  /* performs SkGeClose */
+		netif_device_detach(dev);
+	}
+	if (otherdev != dev) {
+		if (netif_running(otherdev)) {
+			netif_carrier_off(otherdev);
+			DoPrintInterfaceChange = SK_FALSE;
+			SkDrvDeInitAdapter(pAC, 1);  /* performs SkGeClose */
+			netif_device_detach(otherdev);
+		}
+	}
+
+	pci_save_state(pdev);
+	pci_enable_wake(pdev, pci_choose_state(pdev, state), 0);
+	if (pAC->AllocFlag & SK_ALLOC_IRQ) {
+		free_irq(dev->irq, dev);
+	}
+	pci_disable_device(pdev);
+	pci_set_power_state(pdev, pci_choose_state(pdev, state));
+
+	return 0;
+}
+
+static int skge_resume(struct pci_dev *pdev)
+{
+	struct net_device *dev = pci_get_drvdata(pdev);
+	DEV_NET *pNet = netdev_priv(dev);
+	SK_AC *pAC = pNet->pAC;
+	struct net_device *otherdev = pAC->dev[1];
+	int ret;
+
+	pci_set_power_state(pdev, PCI_D0);
+	pci_restore_state(pdev);
+	ret = pci_enable_device(pdev);
+	if (ret) {
+		printk(KERN_WARNING "sk98lin: unable to enable device %s "
+				"in resume\n", dev->name);
+		goto err_out;
+	}
+	pci_set_master(pdev);
+	if (pAC->GIni.GIMacsFound == 2)
+		ret = request_irq(dev->irq, SkGeIsr, IRQF_SHARED, "sk98lin", dev);
+	else
+		ret = request_irq(dev->irq, SkGeIsrOnePort, IRQF_SHARED, "sk98lin", dev);
+	if (ret) {
+		printk(KERN_WARNING "sk98lin: unable to acquire IRQ %d\n", dev->irq);
+		ret = -EBUSY;
+		goto err_out_disable_pdev;
+	}
+
+	netif_device_attach(dev);
+	if (netif_running(dev)) {
+		DoPrintInterfaceChange = SK_FALSE;
+		SkDrvInitAdapter(pAC, 0);    /* first device  */
+	}
+	if (otherdev != dev) {
+		netif_device_attach(otherdev);
+		if (netif_running(otherdev)) {
+			DoPrintInterfaceChange = SK_FALSE;
+			SkDrvInitAdapter(pAC, 1);    /* second device  */
+		}
+	}
+
+	return 0;
+
+err_out_disable_pdev:
+	pci_disable_device(pdev);
+err_out:
+	pAC->AllocFlag &= ~SK_ALLOC_IRQ;
+	dev->irq = 0;
+	return ret;
+}
+#else
+#define skge_suspend NULL
+#define skge_resume NULL
+#endif
+
+static struct pci_device_id skge_pci_tbl[] = {
+#ifdef SK98LIN_ALL_DEVICES
+	{ PCI_VENDOR_ID_3COM, 0x1700, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+	{ PCI_VENDOR_ID_3COM, 0x80eb, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+#endif
+#ifdef GENESIS
+	/* Generic SysKonnect SK-98xx Gigabit Ethernet Server Adapter */	
+	{ PCI_VENDOR_ID_SYSKONNECT, 0x4300, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+#endif
+	/* Generic SysKonnect SK-98xx V2.0 Gigabit Ethernet Adapter */	
+	{ PCI_VENDOR_ID_SYSKONNECT, 0x4320, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+#ifdef SK98LIN_ALL_DEVICES
+/* DLink card does not have valid VPD so this driver gags
+ *	{ PCI_VENDOR_ID_DLINK, 0x4c00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+ */
+	{ PCI_VENDOR_ID_MARVELL, 0x4320, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+	{ PCI_VENDOR_ID_MARVELL, 0x5005, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+	{ PCI_VENDOR_ID_CNET, 0x434e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+	{ PCI_VENDOR_ID_LINKSYS, 0x1032, PCI_ANY_ID, 0x0015, },
+	{ PCI_VENDOR_ID_LINKSYS, 0x1064, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+#endif
+	{ 0 }
+};
+
+MODULE_DEVICE_TABLE(pci, skge_pci_tbl);
+
+static struct pci_driver skge_driver = {
+	.name		= "sk98lin",
+	.id_table	= skge_pci_tbl,
+	.probe		= skge_probe_one,
+	.remove		= __devexit_p(skge_remove_one),
+	.suspend	= skge_suspend,
+	.resume		= skge_resume,
+};
+
+static int __init skge_init(void)
+{
+	printk(KERN_NOTICE "sk98lin: driver has been replaced by the skge driver"
+	       " and is scheduled for removal\n");
+
+	return pci_register_driver(&skge_driver);
+}
+
+static void __exit skge_exit(void)
+{
+	pci_unregister_driver(&skge_driver);
+}
+
+module_init(skge_init);
+module_exit(skge_exit);
diff --git a/drivers/net/sk98lin/skgehwt.c b/drivers/net/sk98lin/skgehwt.c
new file mode 100644
index 0000000..db67099
--- /dev/null
+++ b/drivers/net/sk98lin/skgehwt.c
@@ -0,0 +1,171 @@
+/******************************************************************************
+ *
+ * Name:	skgehwt.c
+ * Project:	Gigabit Ethernet Adapters, Event Scheduler Module
+ * Version:	$Revision: 1.15 $
+ * Date:	$Date: 2003/09/16 13:41:23 $
+ * Purpose:	Hardware Timer
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *	(C)Copyright 1998-2002 SysKonnect GmbH.
+ *	(C)Copyright 2002-2003 Marvell.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/*
+ *	Event queue and dispatcher
+ */
+#if (defined(DEBUG) || ((!defined(LINT)) && (!defined(SK_SLIM))))
+static const char SysKonnectFileId[] =
+	"@(#) $Id: skgehwt.c,v 1.15 2003/09/16 13:41:23 rschmidt Exp $ (C) Marvell.";
+#endif
+
+#include "h/skdrv1st.h"		/* Driver Specific Definitions */
+#include "h/skdrv2nd.h"		/* Adapter Control- and Driver specific Def. */
+
+#ifdef __C2MAN__
+/*
+ *   Hardware Timer function queue management.
+ */
+intro()
+{}
+#endif
+
+/*
+ * Prototypes of local functions.
+ */
+#define	SK_HWT_MAX	(65000)
+
+/* correction factor */
+#define	SK_HWT_FAC	(1000 * (SK_U32)pAC->GIni.GIHstClkFact / 100)
+
+/*
+ * Initialize hardware timer.
+ *
+ * Must be called during init level 1.
+ */
+void	SkHwtInit(
+SK_AC	*pAC,	/* Adapters context */
+SK_IOC	Ioc)	/* IoContext */
+{
+	pAC->Hwt.TStart = 0 ;
+	pAC->Hwt.TStop	= 0 ;
+	pAC->Hwt.TActive = SK_FALSE;
+
+	SkHwtStop(pAC, Ioc);
+}
+
+/*
+ *
+ * Start hardware timer (clock ticks are 16us).
+ *
+ */
+void	SkHwtStart(
+SK_AC	*pAC,	/* Adapters context */
+SK_IOC	Ioc,	/* IoContext */
+SK_U32	Time)	/* Time in units of 16us to load the timer with. */
+{
+	SK_U32	Cnt;
+
+	if (Time > SK_HWT_MAX)
+		Time = SK_HWT_MAX;
+
+	pAC->Hwt.TStart = Time;
+	pAC->Hwt.TStop = 0L;
+
+	Cnt = Time;
+
+	/*
+	 * if time < 16 us
+	 *	time = 16 us
+	 */
+	if (!Cnt) {
+		Cnt++;
+	}
+
+	SK_OUT32(Ioc, B2_TI_INI, Cnt * SK_HWT_FAC);
+	
+	SK_OUT16(Ioc, B2_TI_CTRL, TIM_START);	/* Start timer. */
+
+	pAC->Hwt.TActive = SK_TRUE;
+}
+
+/*
+ * Stop hardware timer.
+ * and clear the timer IRQ
+ */
+void	SkHwtStop(
+SK_AC	*pAC,	/* Adapters context */
+SK_IOC	Ioc)	/* IoContext */
+{
+	SK_OUT16(Ioc, B2_TI_CTRL, TIM_STOP);
+	
+	SK_OUT16(Ioc, B2_TI_CTRL, TIM_CLR_IRQ);
+
+	pAC->Hwt.TActive = SK_FALSE;
+}
+
+
+/*
+ *	Stop hardware timer and read time elapsed since last start.
+ *
+ * returns
+ *	The elapsed time since last start in units of 16us.
+ *
+ */
+SK_U32	SkHwtRead(
+SK_AC	*pAC,	/* Adapters context */
+SK_IOC	Ioc)	/* IoContext */
+{
+	SK_U32	TRead;
+	SK_U32	IStatus;
+
+	if (pAC->Hwt.TActive) {
+		
+		SkHwtStop(pAC, Ioc);
+
+		SK_IN32(Ioc, B2_TI_VAL, &TRead);
+		TRead /= SK_HWT_FAC;
+
+		SK_IN32(Ioc, B0_ISRC, &IStatus);
+
+		/* Check if timer expired (or wraped around) */
+		if ((TRead > pAC->Hwt.TStart) || (IStatus & IS_TIMINT)) {
+			
+			SkHwtStop(pAC, Ioc);
+			
+			pAC->Hwt.TStop = pAC->Hwt.TStart;
+		}
+		else {
+			
+			pAC->Hwt.TStop = pAC->Hwt.TStart - TRead;
+		}
+	}
+	return(pAC->Hwt.TStop);
+}
+
+/*
+ * interrupt source= timer
+ */
+void	SkHwtIsr(
+SK_AC	*pAC,	/* Adapters context */
+SK_IOC	Ioc)	/* IoContext */
+{
+	SkHwtStop(pAC, Ioc);
+	
+	pAC->Hwt.TStop = pAC->Hwt.TStart;
+	
+	SkTimerDone(pAC, Ioc);
+}
+
+/* End of file */
diff --git a/drivers/net/sk98lin/skgeinit.c b/drivers/net/sk98lin/skgeinit.c
new file mode 100644
index 0000000..67f1d6a
--- /dev/null
+++ b/drivers/net/sk98lin/skgeinit.c
@@ -0,0 +1,2005 @@
+/******************************************************************************
+ *
+ * Name:	skgeinit.c
+ * Project:	Gigabit Ethernet Adapters, Common Modules
+ * Version:	$Revision: 1.97 $
+ * Date:	$Date: 2003/10/02 16:45:31 $
+ * Purpose:	Contains functions to initialize the adapter
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *	(C)Copyright 1998-2002 SysKonnect.
+ *	(C)Copyright 2002-2003 Marvell.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+#include "h/skdrv1st.h"
+#include "h/skdrv2nd.h"
+
+/* global variables ***********************************************************/
+
+/* local variables ************************************************************/
+
+#if (defined(DEBUG) || ((!defined(LINT)) && (!defined(SK_SLIM))))
+static const char SysKonnectFileId[] =
+	"@(#) $Id: skgeinit.c,v 1.97 2003/10/02 16:45:31 rschmidt Exp $ (C) Marvell.";
+#endif
+
+struct s_QOffTab {
+	int	RxQOff;		/* Receive Queue Address Offset */
+	int	XsQOff;		/* Sync Tx Queue Address Offset */
+	int	XaQOff;		/* Async Tx Queue Address Offset */
+};
+static struct s_QOffTab QOffTab[] = {
+	{Q_R1, Q_XS1, Q_XA1}, {Q_R2, Q_XS2, Q_XA2}
+};
+
+struct s_Config {
+	char	ScanString[8];
+	SK_U32	Value;
+};
+
+static struct s_Config OemConfig = {
+	{'O','E','M','_','C','o','n','f'},
+#ifdef SK_OEM_CONFIG
+	OEM_CONFIG_VALUE,
+#else
+	0,
+#endif
+};
+
+/******************************************************************************
+ *
+ *	SkGePollTxD() - Enable / Disable Descriptor Polling of TxD Rings
+ *
+ * Description:
+ *	Enable or disable the descriptor polling of the transmit descriptor
+ *	ring(s) (TxD) for port 'Port'.
+ *	The new configuration is *not* saved over any SkGeStopPort() and
+ *	SkGeInitPort() calls.
+ *
+ * Returns:
+ *	nothing
+ */
+void SkGePollTxD(
+SK_AC	*pAC,		/* adapter context */
+SK_IOC	IoC,		/* IO context */
+int		Port,		/* Port Index (MAC_1 + n) */
+SK_BOOL PollTxD)	/* SK_TRUE (enable pol.), SK_FALSE (disable pol.) */
+{
+	SK_GEPORT *pPrt;
+	SK_U32	DWord;
+
+	pPrt = &pAC->GIni.GP[Port];
+
+	DWord = (SK_U32)(PollTxD ? CSR_ENA_POL : CSR_DIS_POL);
+
+	if (pPrt->PXSQSize != 0) {
+		SK_OUT32(IoC, Q_ADDR(pPrt->PXsQOff, Q_CSR), DWord);
+	}
+	
+	if (pPrt->PXAQSize != 0) {
+		SK_OUT32(IoC, Q_ADDR(pPrt->PXaQOff, Q_CSR), DWord);
+	}
+}	/* SkGePollTxD */
+
+
+/******************************************************************************
+ *
+ *	SkGeYellowLED() - Switch the yellow LED on or off.
+ *
+ * Description:
+ *	Switch the yellow LED on or off.
+ *
+ * Note:
+ *	This function may be called any time after SkGeInit(Level 1).
+ *
+ * Returns:
+ *	nothing
+ */
+void SkGeYellowLED(
+SK_AC	*pAC,		/* adapter context */
+SK_IOC	IoC,		/* IO context */
+int		State)		/* yellow LED state, 0 = OFF, 0 != ON */
+{
+	if (State == 0) {
+		/* Switch yellow LED OFF */
+		SK_OUT8(IoC, B0_LED, LED_STAT_OFF);
+	}
+	else {
+		/* Switch yellow LED ON */
+		SK_OUT8(IoC, B0_LED, LED_STAT_ON);
+	}
+}	/* SkGeYellowLED */
+
+
+#if (!defined(SK_SLIM) || defined(GENESIS))
+/******************************************************************************
+ *
+ *	SkGeXmitLED() - Modify the Operational Mode of a transmission LED.
+ *
+ * Description:
+ *	The Rx or Tx LED which is specified by 'Led' will be
+ *	enabled, disabled or switched on in test mode.
+ *
+ * Note:
+ *	'Led' must contain the address offset of the LEDs INI register.
+ *
+ * Usage:
+ *	SkGeXmitLED(pAC, IoC, MR_ADDR(Port, TX_LED_INI), SK_LED_ENA);
+ *
+ * Returns:
+ *	nothing
+ */
+void SkGeXmitLED(
+SK_AC	*pAC,		/* adapter context */
+SK_IOC	IoC,		/* IO context */
+int		Led,		/* offset to the LED Init Value register */
+int		Mode)		/* Mode may be SK_LED_DIS, SK_LED_ENA, SK_LED_TST */
+{
+	SK_U32	LedIni;
+
+	switch (Mode) {
+	case SK_LED_ENA:
+		LedIni = SK_XMIT_DUR * (SK_U32)pAC->GIni.GIHstClkFact / 100;
+		SK_OUT32(IoC, Led + XMIT_LED_INI, LedIni);
+		SK_OUT8(IoC, Led + XMIT_LED_CTRL, LED_START);
+		break;
+	case SK_LED_TST:
+		SK_OUT8(IoC, Led + XMIT_LED_TST, LED_T_ON);
+		SK_OUT32(IoC, Led + XMIT_LED_CNT, 100);
+		SK_OUT8(IoC, Led + XMIT_LED_CTRL, LED_START);
+		break;
+	case SK_LED_DIS:
+	default:
+		/*
+		 * Do NOT stop the LED Timer here. The LED might be
+		 * in on state. But it needs to go off.
+		 */
+		SK_OUT32(IoC, Led + XMIT_LED_CNT, 0);
+		SK_OUT8(IoC, Led + XMIT_LED_TST, LED_T_OFF);
+		break;
+	}
+			
+	/*
+	 * 1000BT: The Transmit LED is driven by the PHY.
+	 * But the default LED configuration is used for
+	 * Level One and Broadcom PHYs.
+	 * (Broadcom: It may be that PHY_B_PEC_EN_LTR has to be set.)
+	 * (In this case it has to be added here. But we will see. XXX)
+	 */
+}	/* SkGeXmitLED */
+#endif	/* !SK_SLIM || GENESIS */
+
+
+/******************************************************************************
+ *
+ *	DoCalcAddr() - Calculates the start and the end address of a queue.
+ *
+ * Description:
+ *	This function calculates the start and the end address of a queue.
+ *  Afterwards the 'StartVal' is incremented to the next start position.
+ *	If the port is already initialized the calculated values
+ *	will be checked against the configured values and an
+ *	error will be returned, if they are not equal.
+ *	If the port is not initialized the values will be written to
+ *	*StartAdr and *EndAddr.
+ *
+ * Returns:
+ *	0:	success
+ *	1:	configuration error
+ */
+static int DoCalcAddr(
+SK_AC		*pAC, 				/* adapter context */
+SK_GEPORT	SK_FAR *pPrt,		/* port index */
+int			QuSize,				/* size of the queue to configure in kB */
+SK_U32		SK_FAR *StartVal,	/* start value for address calculation */
+SK_U32		SK_FAR *QuStartAddr,/* start addr to calculate */
+SK_U32		SK_FAR *QuEndAddr)	/* end address to calculate */
+{
+	SK_U32	EndVal;
+	SK_U32	NextStart;
+	int		Rtv;
+
+	Rtv = 0;
+	if (QuSize == 0) {
+		EndVal = *StartVal;
+		NextStart = EndVal;
+	}
+	else {
+		EndVal = *StartVal + ((SK_U32)QuSize * 1024) - 1;
+		NextStart = EndVal + 1;
+	}
+
+	if (pPrt->PState >= SK_PRT_INIT) {
+		if (*StartVal != *QuStartAddr || EndVal != *QuEndAddr) {
+			Rtv = 1;
+		}
+	}
+	else {
+		*QuStartAddr = *StartVal;
+		*QuEndAddr = EndVal;
+	}
+
+	*StartVal = NextStart;
+	return(Rtv);
+}	/* DoCalcAddr */
+
+/******************************************************************************
+ *
+ *	SkGeInitAssignRamToQueues() - allocate default queue sizes
+ *
+ * Description:
+ *	This function assigns the memory to the different queues and ports.
+ *	When DualNet is set to SK_TRUE all ports get the same amount of memory.
+ *  Otherwise the first port gets most of the memory and all the
+ *	other ports just the required minimum.
+ *	This function can only be called when pAC->GIni.GIRamSize and
+ *	pAC->GIni.GIMacsFound have been initialized, usually this happens
+ *	at init level 1
+ *
+ * Returns:
+ *	0 - ok
+ *	1 - invalid input values
+ *	2 - not enough memory
+ */
+
+int SkGeInitAssignRamToQueues(
+SK_AC	*pAC,			/* Adapter context */
+int		ActivePort,		/* Active Port in RLMT mode */
+SK_BOOL	DualNet)		/* adapter context */
+{
+	int	i;
+	int	UsedKilobytes;			/* memory already assigned */
+	int	ActivePortKilobytes;	/* memory available for active port */
+	SK_GEPORT *pGePort;
+
+	UsedKilobytes = 0;
+
+	if (ActivePort >= pAC->GIni.GIMacsFound) {
+		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_INIT,
+			("SkGeInitAssignRamToQueues: ActivePort (%d) invalid\n",
+			ActivePort));
+		return(1);
+	}
+	if (((pAC->GIni.GIMacsFound * (SK_MIN_RXQ_SIZE + SK_MIN_TXQ_SIZE)) +
+		((RAM_QUOTA_SYNC == 0) ? 0 : SK_MIN_TXQ_SIZE)) > pAC->GIni.GIRamSize) {
+		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_INIT,
+			("SkGeInitAssignRamToQueues: Not enough memory (%d)\n",
+			 pAC->GIni.GIRamSize));
+		return(2);
+	}
+
+	if (DualNet) {
+		/* every port gets the same amount of memory */
+		ActivePortKilobytes = pAC->GIni.GIRamSize / pAC->GIni.GIMacsFound;
+		for (i = 0; i < pAC->GIni.GIMacsFound; i++) {
+
+			pGePort = &pAC->GIni.GP[i];
+			
+			/* take away the minimum memory for active queues */
+			ActivePortKilobytes -= (SK_MIN_RXQ_SIZE + SK_MIN_TXQ_SIZE);
+
+			/* receive queue gets the minimum + 80% of the rest */
+			pGePort->PRxQSize = (int) (ROUND_QUEUE_SIZE_KB((
+				ActivePortKilobytes * (unsigned long) RAM_QUOTA_RX) / 100))
+				+ SK_MIN_RXQ_SIZE;
+
+			ActivePortKilobytes -= (pGePort->PRxQSize - SK_MIN_RXQ_SIZE);
+
+			/* synchronous transmit queue */
+			pGePort->PXSQSize = 0;
+
+			/* asynchronous transmit queue */
+			pGePort->PXAQSize = (int) ROUND_QUEUE_SIZE_KB(ActivePortKilobytes +
+				SK_MIN_TXQ_SIZE);
+		}
+	}
+	else {	
+		/* Rlmt Mode or single link adapter */
+
+		/* Set standby queue size defaults for all standby ports */
+		for (i = 0; i < pAC->GIni.GIMacsFound; i++) {
+
+			if (i != ActivePort) {
+				pGePort = &pAC->GIni.GP[i];
+
+				pGePort->PRxQSize = SK_MIN_RXQ_SIZE;
+				pGePort->PXAQSize = SK_MIN_TXQ_SIZE;
+				pGePort->PXSQSize = 0;
+
+				/* Count used RAM */
+				UsedKilobytes += pGePort->PRxQSize + pGePort->PXAQSize;
+			}
+		}
+		/* what's left? */
+		ActivePortKilobytes = pAC->GIni.GIRamSize - UsedKilobytes;
+
+		/* assign it to the active port */
+		/* first take away the minimum memory */
+		ActivePortKilobytes -= (SK_MIN_RXQ_SIZE + SK_MIN_TXQ_SIZE);
+		pGePort = &pAC->GIni.GP[ActivePort];
+
+		/* receive queue get's the minimum + 80% of the rest */
+		pGePort->PRxQSize = (int) (ROUND_QUEUE_SIZE_KB((ActivePortKilobytes *
+			(unsigned long) RAM_QUOTA_RX) / 100)) + SK_MIN_RXQ_SIZE;
+
+		ActivePortKilobytes -= (pGePort->PRxQSize - SK_MIN_RXQ_SIZE);
+
+		/* synchronous transmit queue */
+		pGePort->PXSQSize = 0;
+
+		/* asynchronous transmit queue */
+		pGePort->PXAQSize = (int) ROUND_QUEUE_SIZE_KB(ActivePortKilobytes) +
+			SK_MIN_TXQ_SIZE;
+	}
+#ifdef VCPU
+	VCPUprintf(0, "PRxQSize=%u, PXSQSize=%u, PXAQSize=%u\n",
+		pGePort->PRxQSize, pGePort->PXSQSize, pGePort->PXAQSize);
+#endif /* VCPU */
+
+	return(0);
+}	/* SkGeInitAssignRamToQueues */
+
+/******************************************************************************
+ *
+ *	SkGeCheckQSize() - Checks the Adapters Queue Size Configuration
+ *
+ * Description:
+ *	This function verifies the Queue Size Configuration specified
+ *	in the variables PRxQSize, PXSQSize, and PXAQSize of all
+ *	used ports.
+ *	This requirements must be fullfilled to have a valid configuration:
+ *		- The size of all queues must not exceed GIRamSize.
+ *		- The queue sizes must be specified in units of 8 kB.
+ *		- The size of Rx queues of available ports must not be
+ *		  smaller than 16 kB.
+ *		- The size of at least one Tx queue (synch. or asynch.)
+ *        of available ports must not be smaller than 16 kB
+ *        when Jumbo Frames are used.
+ *		- The RAM start and end addresses must not be changed
+ *		  for ports which are already initialized.
+ *	Furthermore SkGeCheckQSize() defines the Start and End Addresses
+ *  of all ports and stores them into the HWAC port	structure.
+ *
+ * Returns:
+ *	0:	Queue Size Configuration valid
+ *	1:	Queue Size Configuration invalid
+ */
+static int SkGeCheckQSize(
+SK_AC	 *pAC,		/* adapter context */
+int		 Port)		/* port index */
+{
+	SK_GEPORT *pPrt;
+	int	i;
+	int	Rtv;
+	int	Rtv2;
+	SK_U32	StartAddr;
+#ifndef SK_SLIM
+	int	UsedMem;	/* total memory used (max. found ports) */
+#endif	
+
+	Rtv = 0;
+	
+#ifndef SK_SLIM
+
+	UsedMem = 0;
+	for (i = 0; i < pAC->GIni.GIMacsFound; i++) {
+		pPrt = &pAC->GIni.GP[i];
+
+		if ((pPrt->PRxQSize & QZ_UNITS) != 0 ||
+			(pPrt->PXSQSize & QZ_UNITS) != 0 ||
+			(pPrt->PXAQSize & QZ_UNITS) != 0) {
+
+			SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E012, SKERR_HWI_E012MSG);
+			return(1);
+		}
+
+		if (i == Port && pPrt->PRxQSize < SK_MIN_RXQ_SIZE) {
+			SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E011, SKERR_HWI_E011MSG);
+			return(1);
+		}
+		
+		/*
+		 * the size of at least one Tx queue (synch. or asynch.) has to be > 0.
+		 * if Jumbo Frames are used, this size has to be >= 16 kB.
+		 */
+		if ((i == Port && pPrt->PXSQSize == 0 && pPrt->PXAQSize == 0) ||
+			(pAC->GIni.GIPortUsage == SK_JUMBO_LINK &&
+            ((pPrt->PXSQSize > 0 && pPrt->PXSQSize < SK_MIN_TXQ_SIZE) ||
+			 (pPrt->PXAQSize > 0 && pPrt->PXAQSize < SK_MIN_TXQ_SIZE)))) {
+				SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E023, SKERR_HWI_E023MSG);
+				return(1);
+		}
+		
+		UsedMem += pPrt->PRxQSize + pPrt->PXSQSize + pPrt->PXAQSize;
+	}
+	
+	if (UsedMem > pAC->GIni.GIRamSize) {
+		SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E012, SKERR_HWI_E012MSG);
+		return(1);
+	}
+#endif	/* !SK_SLIM */
+
+	/* Now start address calculation */
+	StartAddr = pAC->GIni.GIRamOffs;
+	for (i = 0; i < pAC->GIni.GIMacsFound; i++) {
+		pPrt = &pAC->GIni.GP[i];
+
+		/* Calculate/Check values for the receive queue */
+		Rtv2 = DoCalcAddr(pAC, pPrt, pPrt->PRxQSize, &StartAddr,
+			&pPrt->PRxQRamStart, &pPrt->PRxQRamEnd);
+		Rtv |= Rtv2;
+
+		/* Calculate/Check values for the synchronous Tx queue */
+		Rtv2 = DoCalcAddr(pAC, pPrt, pPrt->PXSQSize, &StartAddr,
+			&pPrt->PXsQRamStart, &pPrt->PXsQRamEnd);
+		Rtv |= Rtv2;
+
+		/* Calculate/Check values for the asynchronous Tx queue */
+		Rtv2 = DoCalcAddr(pAC, pPrt, pPrt->PXAQSize, &StartAddr,
+			&pPrt->PXaQRamStart, &pPrt->PXaQRamEnd);
+		Rtv |= Rtv2;
+
+		if (Rtv) {
+			SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E013, SKERR_HWI_E013MSG);
+			return(1);
+		}
+	}
+
+	return(0);
+}	/* SkGeCheckQSize */
+
+
+#ifdef GENESIS
+/******************************************************************************
+ *
+ *	SkGeInitMacArb() - Initialize the MAC Arbiter
+ *
+ * Description:
+ *	This function initializes the MAC Arbiter.
+ *	It must not be called if there is still an
+ *	initialized or active port.
+ *
+ * Returns:
+ *	nothing
+ */
+static void SkGeInitMacArb(
+SK_AC	*pAC,		/* adapter context */
+SK_IOC	IoC)		/* IO context */
+{
+	/* release local reset */
+	SK_OUT16(IoC, B3_MA_TO_CTRL, MA_RST_CLR);
+
+	/* configure timeout values */
+	SK_OUT8(IoC, B3_MA_TOINI_RX1, SK_MAC_TO_53);
+	SK_OUT8(IoC, B3_MA_TOINI_RX2, SK_MAC_TO_53);
+	SK_OUT8(IoC, B3_MA_TOINI_TX1, SK_MAC_TO_53);
+	SK_OUT8(IoC, B3_MA_TOINI_TX2, SK_MAC_TO_53);
+
+	SK_OUT8(IoC, B3_MA_RCINI_RX1, 0);
+	SK_OUT8(IoC, B3_MA_RCINI_RX2, 0);
+	SK_OUT8(IoC, B3_MA_RCINI_TX1, 0);
+	SK_OUT8(IoC, B3_MA_RCINI_TX2, 0);
+
+	/* recovery values are needed for XMAC II Rev. B2 only */
+	/* Fast Output Enable Mode was intended to use with Rev. B2, but now? */
+
+	/*
+	 * There is no start or enable button to push, therefore
+	 * the MAC arbiter is configured and enabled now.
+	 */
+}	/* SkGeInitMacArb */
+
+
+/******************************************************************************
+ *
+ *	SkGeInitPktArb() - Initialize the Packet Arbiter
+ *
+ * Description:
+ *	This function initializes the Packet Arbiter.
+ *	It must not be called if there is still an
+ *	initialized or active port.
+ *
+ * Returns:
+ *	nothing
+ */
+static void SkGeInitPktArb(
+SK_AC	*pAC,		/* adapter context */
+SK_IOC	IoC)		/* IO context */
+{
+	/* release local reset */
+	SK_OUT16(IoC, B3_PA_CTRL, PA_RST_CLR);
+
+	/* configure timeout values */
+	SK_OUT16(IoC, B3_PA_TOINI_RX1, SK_PKT_TO_MAX);
+	SK_OUT16(IoC, B3_PA_TOINI_RX2, SK_PKT_TO_MAX);
+	SK_OUT16(IoC, B3_PA_TOINI_TX1, SK_PKT_TO_MAX);
+	SK_OUT16(IoC, B3_PA_TOINI_TX2, SK_PKT_TO_MAX);
+
+	/*
+	 * enable timeout timers if jumbo frames not used
+	 * NOTE: the packet arbiter timeout interrupt is needed for
+	 * half duplex hangup workaround
+	 */
+	if (pAC->GIni.GIPortUsage != SK_JUMBO_LINK) {
+		if (pAC->GIni.GIMacsFound == 1) {
+			SK_OUT16(IoC, B3_PA_CTRL, PA_ENA_TO_TX1);
+		}
+		else {
+			SK_OUT16(IoC, B3_PA_CTRL, PA_ENA_TO_TX1 | PA_ENA_TO_TX2);
+		}
+	}
+}	/* SkGeInitPktArb */
+#endif /* GENESIS */
+
+
+/******************************************************************************
+ *
+ *	SkGeInitMacFifo() - Initialize the MAC FIFOs
+ *
+ * Description:
+ *	Initialize all MAC FIFOs of the specified port
+ *
+ * Returns:
+ *	nothing
+ */
+static void SkGeInitMacFifo(
+SK_AC	*pAC,		/* adapter context */
+SK_IOC	IoC,		/* IO context */
+int		Port)		/* Port Index (MAC_1 + n) */
+{
+	SK_U16	Word;
+#ifdef VCPU
+	SK_U32	DWord;
+#endif /* VCPU */
+	/*
+	 * For each FIFO:
+	 *	- release local reset
+	 *	- use default value for MAC FIFO size
+	 *	- setup defaults for the control register
+	 *	- enable the FIFO
+	 */
+	
+#ifdef GENESIS
+	if (pAC->GIni.GIGenesis) {
+		/* Configure Rx MAC FIFO */
+		SK_OUT8(IoC, MR_ADDR(Port, RX_MFF_CTRL2), MFF_RST_CLR);
+		SK_OUT16(IoC, MR_ADDR(Port, RX_MFF_CTRL1), MFF_RX_CTRL_DEF);
+		SK_OUT8(IoC, MR_ADDR(Port, RX_MFF_CTRL2), MFF_ENA_OP_MD);
+	
+		/* Configure Tx MAC FIFO */
+		SK_OUT8(IoC, MR_ADDR(Port, TX_MFF_CTRL2), MFF_RST_CLR);
+		SK_OUT16(IoC, MR_ADDR(Port, TX_MFF_CTRL1), MFF_TX_CTRL_DEF);
+		SK_OUT8(IoC, MR_ADDR(Port, TX_MFF_CTRL2), MFF_ENA_OP_MD);
+	
+		/* Enable frame flushing if jumbo frames used */
+		if (pAC->GIni.GIPortUsage == SK_JUMBO_LINK) {
+			SK_OUT16(IoC, MR_ADDR(Port, RX_MFF_CTRL1), MFF_ENA_FLUSH);
+		}
+	}
+#endif /* GENESIS */
+	
+#ifdef YUKON
+	if (pAC->GIni.GIYukon) {
+		/* set Rx GMAC FIFO Flush Mask */
+		SK_OUT16(IoC, MR_ADDR(Port, RX_GMF_FL_MSK), (SK_U16)RX_FF_FL_DEF_MSK);
+		
+		Word = (SK_U16)GMF_RX_CTRL_DEF;
+
+		/* disable Rx GMAC FIFO Flush for YUKON-Lite Rev. A0 only */
+		if (pAC->GIni.GIYukonLite && pAC->GIni.GIChipId == CHIP_ID_YUKON) {
+
+			Word &= ~GMF_RX_F_FL_ON;
+		}
+		
+		/* Configure Rx MAC FIFO */
+		SK_OUT8(IoC, MR_ADDR(Port, RX_GMF_CTRL_T), (SK_U8)GMF_RST_CLR);
+		SK_OUT16(IoC, MR_ADDR(Port, RX_GMF_CTRL_T), Word);
+		
+		/* set Rx GMAC FIFO Flush Threshold (default: 0x0a -> 56 bytes) */
+		SK_OUT16(IoC, MR_ADDR(Port, RX_GMF_FL_THR), RX_GMF_FL_THR_DEF);
+		
+		/* Configure Tx MAC FIFO */
+		SK_OUT8(IoC, MR_ADDR(Port, TX_GMF_CTRL_T), (SK_U8)GMF_RST_CLR);
+		SK_OUT16(IoC, MR_ADDR(Port, TX_GMF_CTRL_T), (SK_U16)GMF_TX_CTRL_DEF);
+		
+#ifdef VCPU
+		SK_IN32(IoC, MR_ADDR(Port, RX_GMF_AF_THR), &DWord);
+		SK_IN32(IoC, MR_ADDR(Port, TX_GMF_AE_THR), &DWord);
+#endif /* VCPU */
+		
+		/* set Tx GMAC FIFO Almost Empty Threshold */
+/*		SK_OUT32(IoC, MR_ADDR(Port, TX_GMF_AE_THR), 0); */
+	}
+#endif /* YUKON */
+
+}	/* SkGeInitMacFifo */
+
+#ifdef	SK_LNK_SYNC_CNT
+/******************************************************************************
+ *
+ *	SkGeLoadLnkSyncCnt() - Load the Link Sync Counter and starts counting
+ *
+ * Description:
+ *	This function starts the Link Sync Counter of the specified
+ *	port and enables the generation of an Link Sync IRQ.
+ *	The Link Sync Counter may be used to detect an active link,
+ *	if autonegotiation is not used.
+ *
+ * Note:
+ *	o To ensure receiving the Link Sync Event the LinkSyncCounter
+ *	  should be initialized BEFORE clearing the XMAC's reset!
+ *	o Enable IS_LNK_SYNC_M1 and IS_LNK_SYNC_M2 after calling this
+ *	  function.
+ *
+ * Returns:
+ *	nothing
+ */
+void SkGeLoadLnkSyncCnt(
+SK_AC	*pAC,		/* adapter context */
+SK_IOC	IoC,		/* IO context */
+int		Port,		/* Port Index (MAC_1 + n) */
+SK_U32	CntVal)		/* Counter value */
+{
+	SK_U32	OrgIMsk;
+	SK_U32	NewIMsk;
+	SK_U32	ISrc;
+	SK_BOOL	IrqPend;
+
+	/* stop counter */
+	SK_OUT8(IoC, MR_ADDR(Port, LNK_SYNC_CTRL), LED_STOP);
+
+	/*
+	 * ASIC problem:
+	 * Each time starting the Link Sync Counter an IRQ is generated
+	 * by the adapter. See problem report entry from 21.07.98
+	 *
+	 * Workaround:	Disable Link Sync IRQ and clear the unexpeced IRQ
+	 *		if no IRQ is already pending.
+	 */
+	IrqPend = SK_FALSE;
+	SK_IN32(IoC, B0_ISRC, &ISrc);
+	SK_IN32(IoC, B0_IMSK, &OrgIMsk);
+	if (Port == MAC_1) {
+		NewIMsk = OrgIMsk & ~IS_LNK_SYNC_M1;
+		if ((ISrc & IS_LNK_SYNC_M1) != 0) {
+			IrqPend = SK_TRUE;
+		}
+	}
+	else {
+		NewIMsk = OrgIMsk & ~IS_LNK_SYNC_M2;
+		if ((ISrc & IS_LNK_SYNC_M2) != 0) {
+			IrqPend = SK_TRUE;
+		}
+	}
+	if (!IrqPend) {
+		SK_OUT32(IoC, B0_IMSK, NewIMsk);
+	}
+
+	/* load counter */
+	SK_OUT32(IoC, MR_ADDR(Port, LNK_SYNC_INI), CntVal);
+
+	/* start counter */
+	SK_OUT8(IoC, MR_ADDR(Port, LNK_SYNC_CTRL), LED_START);
+
+	if (!IrqPend) {
+		/* clear the unexpected IRQ, and restore the interrupt mask */
+		SK_OUT8(IoC, MR_ADDR(Port, LNK_SYNC_CTRL), LED_CLR_IRQ);
+		SK_OUT32(IoC, B0_IMSK, OrgIMsk);
+	}
+}	/* SkGeLoadLnkSyncCnt*/
+#endif	/* SK_LNK_SYNC_CNT */
+
+#if defined(SK_DIAG) || defined(SK_CFG_SYNC)
+/******************************************************************************
+ *
+ *	SkGeCfgSync() - Configure synchronous bandwidth for this port.
+ *
+ * Description:
+ *	This function may be used to configure synchronous bandwidth
+ *	to the specified port. This may be done any time after
+ *	initializing the port. The configuration values are NOT saved
+ *	in the HWAC port structure and will be overwritten any
+ *	time when stopping and starting the port.
+ *	Any values for the synchronous configuration will be ignored
+ *	if the size of the synchronous queue is zero!
+ *
+ *	The default configuration for the synchronous service is
+ *	TXA_ENA_FSYNC. This means if the size of
+ *	the synchronous queue is unequal zero but no specific
+ *	synchronous bandwidth is configured, the synchronous queue
+ *	will always have the 'unlimited' transmit priority!
+ *
+ *	This mode will be restored if the synchronous bandwidth is
+ *	deallocated ('IntTime' = 0 and 'LimCount' = 0).
+ *
+ * Returns:
+ *	0:	success
+ *	1:	parameter configuration error
+ *	2:	try to configure quality of service although no
+ *		synchronous queue is configured
+ */
+int SkGeCfgSync(
+SK_AC	*pAC,		/* adapter context */
+SK_IOC	IoC,		/* IO context */
+int		Port,		/* Port Index (MAC_1 + n) */
+SK_U32	IntTime,	/* Interval Timer Value in units of 8ns */
+SK_U32	LimCount,	/* Number of bytes to transfer during IntTime */
+int		SyncMode)	/* Sync Mode: TXA_ENA_ALLOC | TXA_DIS_ALLOC | 0 */
+{
+	int Rtv;
+
+	Rtv = 0;
+
+	/* check the parameters */
+	if (LimCount > IntTime ||
+		(LimCount == 0 && IntTime != 0) ||
+		(LimCount != 0 && IntTime == 0)) {
+
+		SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E010, SKERR_HWI_E010MSG);
+		return(1);
+	}
+	
+	if (pAC->GIni.GP[Port].PXSQSize == 0) {
+		SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E009, SKERR_HWI_E009MSG);
+		return(2);
+	}
+	
+	/* calculate register values */
+	IntTime = (IntTime / 2) * pAC->GIni.GIHstClkFact / 100;
+	LimCount = LimCount / 8;
+	
+	if (IntTime > TXA_MAX_VAL || LimCount > TXA_MAX_VAL) {
+		SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E010, SKERR_HWI_E010MSG);
+		return(1);
+	}
+
+	/*
+	 * - Enable 'Force Sync' to ensure the synchronous queue
+	 *   has the priority while configuring the new values.
+	 * - Also 'disable alloc' to ensure the settings complies
+	 *   to the SyncMode parameter.
+	 * - Disable 'Rate Control' to configure the new values.
+	 * - write IntTime and LimCount
+	 * - start 'Rate Control' and disable 'Force Sync'
+	 *   if Interval Timer or Limit Counter not zero.
+	 */
+	SK_OUT8(IoC, MR_ADDR(Port, TXA_CTRL),
+		TXA_ENA_FSYNC | TXA_DIS_ALLOC | TXA_STOP_RC);
+	
+	SK_OUT32(IoC, MR_ADDR(Port, TXA_ITI_INI), IntTime);
+	SK_OUT32(IoC, MR_ADDR(Port, TXA_LIM_INI), LimCount);
+	
+	SK_OUT8(IoC, MR_ADDR(Port, TXA_CTRL),
+		(SK_U8)(SyncMode & (TXA_ENA_ALLOC | TXA_DIS_ALLOC)));
+	
+	if (IntTime != 0 || LimCount != 0) {
+		SK_OUT8(IoC, MR_ADDR(Port, TXA_CTRL), TXA_DIS_FSYNC | TXA_START_RC);
+	}
+
+	return(0);
+}	/* SkGeCfgSync */
+#endif /* SK_DIAG || SK_CFG_SYNC*/
+
+
+/******************************************************************************
+ *
+ *	DoInitRamQueue() - Initialize the RAM Buffer Address of a single Queue
+ *
+ * Desccription:
+ *	If the queue is used, enable and initialize it.
+ *	Make sure the queue is still reset, if it is not used.
+ *
+ * Returns:
+ *	nothing
+ */
+static void DoInitRamQueue(
+SK_AC	*pAC,			/* adapter context */
+SK_IOC	IoC,			/* IO context */
+int		QuIoOffs,		/* Queue IO Address Offset */
+SK_U32	QuStartAddr,	/* Queue Start Address */
+SK_U32	QuEndAddr,		/* Queue End Address */
+int		QuType)			/* Queue Type (SK_RX_SRAM_Q|SK_RX_BRAM_Q|SK_TX_RAM_Q) */
+{
+	SK_U32	RxUpThresVal;
+	SK_U32	RxLoThresVal;
+
+	if (QuStartAddr != QuEndAddr) {
+		/* calculate thresholds, assume we have a big Rx queue */
+		RxUpThresVal = (QuEndAddr + 1 - QuStartAddr - SK_RB_ULPP) / 8;
+		RxLoThresVal = (QuEndAddr + 1 - QuStartAddr - SK_RB_LLPP_B)/8;
+
+		/* build HW address format */
+		QuStartAddr = QuStartAddr / 8;
+		QuEndAddr = QuEndAddr / 8;
+
+		/* release local reset */
+		SK_OUT8(IoC, RB_ADDR(QuIoOffs, RB_CTRL), RB_RST_CLR);
+
+		/* configure addresses */
+		SK_OUT32(IoC, RB_ADDR(QuIoOffs, RB_START), QuStartAddr);
+		SK_OUT32(IoC, RB_ADDR(QuIoOffs, RB_END), QuEndAddr);
+		SK_OUT32(IoC, RB_ADDR(QuIoOffs, RB_WP), QuStartAddr);
+		SK_OUT32(IoC, RB_ADDR(QuIoOffs, RB_RP), QuStartAddr);
+
+		switch (QuType) {
+		case SK_RX_SRAM_Q:
+			/* configure threshold for small Rx Queue */
+			RxLoThresVal += (SK_RB_LLPP_B - SK_RB_LLPP_S) / 8;
+
+			/* continue with SK_RX_BRAM_Q */
+		case SK_RX_BRAM_Q:
+			/* write threshold for Rx Queue */
+
+			SK_OUT32(IoC, RB_ADDR(QuIoOffs, RB_RX_UTPP), RxUpThresVal);
+			SK_OUT32(IoC, RB_ADDR(QuIoOffs, RB_RX_LTPP), RxLoThresVal);
+
+			/* the high priority threshold not used */
+			break;
+		case SK_TX_RAM_Q:
+			/*
+			 * Do NOT use Store & Forward under normal operation due to
+			 * performance optimization (GENESIS only).
+			 * But if Jumbo Frames are configured (XMAC Tx FIFO is only 4 kB)
+			 * or YUKON is used ((GMAC Tx FIFO is only 1 kB)
+			 * we NEED Store & Forward of the RAM buffer.
+			 */
+			if (pAC->GIni.GIPortUsage == SK_JUMBO_LINK ||
+				pAC->GIni.GIYukon) {
+				/* enable Store & Forward Mode for the Tx Side */
+				SK_OUT8(IoC, RB_ADDR(QuIoOffs, RB_CTRL), RB_ENA_STFWD);
+			}
+			break;
+		}
+
+		/* set queue operational */
+		SK_OUT8(IoC, RB_ADDR(QuIoOffs, RB_CTRL), RB_ENA_OP_MD);
+	}
+	else {
+		/* ensure the queue is still disabled */
+		SK_OUT8(IoC, RB_ADDR(QuIoOffs, RB_CTRL), RB_RST_SET);
+	}
+}	/* DoInitRamQueue */
+
+
+/******************************************************************************
+ *
+ *	SkGeInitRamBufs() - Initialize the RAM Buffer Queues
+ *
+ * Description:
+ *	Initialize all RAM Buffer Queues of the specified port
+ *
+ * Returns:
+ *	nothing
+ */
+static void SkGeInitRamBufs(
+SK_AC	*pAC,		/* adapter context */
+SK_IOC	IoC,		/* IO context */
+int		Port)		/* Port Index (MAC_1 + n) */
+{
+	SK_GEPORT *pPrt;
+	int RxQType;
+
+	pPrt = &pAC->GIni.GP[Port];
+
+	if (pPrt->PRxQSize == SK_MIN_RXQ_SIZE) {
+		RxQType = SK_RX_SRAM_Q; 	/* small Rx Queue */
+	}
+	else {
+		RxQType = SK_RX_BRAM_Q;		/* big Rx Queue */
+	}
+
+	DoInitRamQueue(pAC, IoC, pPrt->PRxQOff, pPrt->PRxQRamStart,
+		pPrt->PRxQRamEnd, RxQType);
+	
+	DoInitRamQueue(pAC, IoC, pPrt->PXsQOff, pPrt->PXsQRamStart,
+		pPrt->PXsQRamEnd, SK_TX_RAM_Q);
+	
+	DoInitRamQueue(pAC, IoC, pPrt->PXaQOff, pPrt->PXaQRamStart,
+		pPrt->PXaQRamEnd, SK_TX_RAM_Q);
+
+}	/* SkGeInitRamBufs */
+
+
+/******************************************************************************
+ *
+ *	SkGeInitRamIface() - Initialize the RAM Interface
+ *
+ * Description:
+ *	This function initializes the Adapters RAM Interface.
+ *
+ * Note:
+ *	This function is used in the diagnostics.
+ *
+ * Returns:
+ *	nothing
+ */
+static void SkGeInitRamIface(
+SK_AC	*pAC,		/* adapter context */
+SK_IOC	IoC)		/* IO context */
+{
+	/* release local reset */
+	SK_OUT16(IoC, B3_RI_CTRL, RI_RST_CLR);
+
+	/* configure timeout values */
+	SK_OUT8(IoC, B3_RI_WTO_R1, SK_RI_TO_53);
+	SK_OUT8(IoC, B3_RI_WTO_XA1, SK_RI_TO_53);
+	SK_OUT8(IoC, B3_RI_WTO_XS1, SK_RI_TO_53);
+	SK_OUT8(IoC, B3_RI_RTO_R1, SK_RI_TO_53);
+	SK_OUT8(IoC, B3_RI_RTO_XA1, SK_RI_TO_53);
+	SK_OUT8(IoC, B3_RI_RTO_XS1, SK_RI_TO_53);
+	SK_OUT8(IoC, B3_RI_WTO_R2, SK_RI_TO_53);
+	SK_OUT8(IoC, B3_RI_WTO_XA2, SK_RI_TO_53);
+	SK_OUT8(IoC, B3_RI_WTO_XS2, SK_RI_TO_53);
+	SK_OUT8(IoC, B3_RI_RTO_R2, SK_RI_TO_53);
+	SK_OUT8(IoC, B3_RI_RTO_XA2, SK_RI_TO_53);
+	SK_OUT8(IoC, B3_RI_RTO_XS2, SK_RI_TO_53);
+
+}	/* SkGeInitRamIface */
+
+
+/******************************************************************************
+ *
+ *	SkGeInitBmu() - Initialize the BMU state machines
+ *
+ * Description:
+ *	Initialize all BMU state machines of the specified port
+ *
+ * Returns:
+ *	nothing
+ */
+static void SkGeInitBmu(
+SK_AC	*pAC,		/* adapter context */
+SK_IOC	IoC,		/* IO context */
+int		Port)		/* Port Index (MAC_1 + n) */
+{
+	SK_GEPORT	*pPrt;
+	SK_U32		RxWm;
+	SK_U32		TxWm;
+
+	pPrt = &pAC->GIni.GP[Port];
+
+	RxWm = SK_BMU_RX_WM;
+	TxWm = SK_BMU_TX_WM;
+	
+	if (!pAC->GIni.GIPciSlot64 && !pAC->GIni.GIPciClock66) {
+		/* for better performance */
+		RxWm /= 2;
+		TxWm /= 2;
+	}
+
+	/* Rx Queue: Release all local resets and set the watermark */
+	SK_OUT32(IoC, Q_ADDR(pPrt->PRxQOff, Q_CSR), CSR_CLR_RESET);
+	SK_OUT32(IoC, Q_ADDR(pPrt->PRxQOff, Q_F), RxWm);
+
+	/*
+	 * Tx Queue: Release all local resets if the queue is used !
+	 * 		set watermark
+	 */
+	if (pPrt->PXSQSize != 0) {
+		SK_OUT32(IoC, Q_ADDR(pPrt->PXsQOff, Q_CSR), CSR_CLR_RESET);
+		SK_OUT32(IoC, Q_ADDR(pPrt->PXsQOff, Q_F), TxWm);
+	}
+	
+	if (pPrt->PXAQSize != 0) {
+		SK_OUT32(IoC, Q_ADDR(pPrt->PXaQOff, Q_CSR), CSR_CLR_RESET);
+		SK_OUT32(IoC, Q_ADDR(pPrt->PXaQOff, Q_F), TxWm);
+	}
+	/*
+	 * Do NOT enable the descriptor poll timers here, because
+	 * the descriptor addresses are not specified yet.
+	 */
+}	/* SkGeInitBmu */
+
+
+/******************************************************************************
+ *
+ *	TestStopBit() -	Test the stop bit of the queue
+ *
+ * Description:
+ *	Stopping a queue is not as simple as it seems to be.
+ *	If descriptor polling is enabled, it may happen
+ *	that RX/TX stop is done and SV idle is NOT set.
+ *	In this case we have to issue another stop command.
+ *
+ * Returns:
+ *	The queues control status register
+ */
+static SK_U32 TestStopBit(
+SK_AC	*pAC,		/* Adapter Context */
+SK_IOC	IoC,		/* IO Context */
+int		QuIoOffs)	/* Queue IO Address Offset */
+{
+	SK_U32	QuCsr;	/* CSR contents */
+
+	SK_IN32(IoC, Q_ADDR(QuIoOffs, Q_CSR), &QuCsr);
+	
+	if ((QuCsr & (CSR_STOP | CSR_SV_IDLE)) == 0) {
+		/* Stop Descriptor overridden by start command */
+		SK_OUT32(IoC, Q_ADDR(QuIoOffs, Q_CSR), CSR_STOP);
+
+		SK_IN32(IoC, Q_ADDR(QuIoOffs, Q_CSR), &QuCsr);
+	}
+	
+	return(QuCsr);
+}	/* TestStopBit */
+
+
+/******************************************************************************
+ *
+ *	SkGeStopPort() - Stop the Rx/Tx activity of the port 'Port'.
+ *
+ * Description:
+ *	After calling this function the descriptor rings and Rx and Tx
+ *	queues of this port may be reconfigured.
+ *
+ *	It is possible to stop the receive and transmit path separate or
+ *	both together.
+ *
+ *	Dir =	SK_STOP_TX 	Stops the transmit path only and resets the MAC.
+ *				The receive queue is still active and
+ *				the pending Rx frames may be still transferred
+ *				into the RxD.
+ *		SK_STOP_RX	Stop the receive path. The tansmit path
+ *				has to be stopped once before.
+ *		SK_STOP_ALL	SK_STOP_TX + SK_STOP_RX
+ *
+ *	RstMode = SK_SOFT_RST	Resets the MAC. The PHY is still alive.
+ *			SK_HARD_RST	Resets the MAC and the PHY.
+ *
+ * Example:
+ *	1) A Link Down event was signaled for a port. Therefore the activity
+ *	of this port should be stopped and a hardware reset should be issued
+ *	to enable the workaround of XMAC Errata #2. But the received frames
+ *	should not be discarded.
+ *		...
+ *		SkGeStopPort(pAC, IoC, Port, SK_STOP_TX, SK_HARD_RST);
+ *		(transfer all pending Rx frames)
+ *		SkGeStopPort(pAC, IoC, Port, SK_STOP_RX, SK_HARD_RST);
+ *		...
+ *
+ *	2) An event was issued which request the driver to switch
+ *	the 'virtual active' link to an other already active port
+ *	as soon as possible. The frames in the receive queue of this
+ *	port may be lost. But the PHY must not be reset during this
+ *	event.
+ *		...
+ *		SkGeStopPort(pAC, IoC, Port, SK_STOP_ALL, SK_SOFT_RST);
+ *		...
+ *
+ * Extended Description:
+ *	If SK_STOP_TX is set,
+ *		o disable the MAC's receive and transmitter to prevent
+ *		  from sending incomplete frames
+ *		o stop the port's transmit queues before terminating the
+ *		  BMUs to prevent from performing incomplete PCI cycles
+ *		  on the PCI bus
+ *		- The network Rx and Tx activity and PCI Tx transfer is
+ *		  disabled now.
+ *		o reset the MAC depending on the RstMode
+ *		o Stop Interval Timer and Limit Counter of Tx Arbiter,
+ *		  also disable Force Sync bit and Enable Alloc bit.
+ *		o perform a local reset of the port's Tx path
+ *			- reset the PCI FIFO of the async Tx queue
+ *			- reset the PCI FIFO of the sync Tx queue
+ *			- reset the RAM Buffer async Tx queue
+ *			- reset the RAM Buffer sync Tx queue
+ *			- reset the MAC Tx FIFO
+ *		o switch Link and Tx LED off, stop the LED counters
+ *
+ *	If SK_STOP_RX is set,
+ *		o stop the port's receive queue
+ *		- The path data transfer activity is fully stopped now.
+ *		o perform a local reset of the port's Rx path
+ *			- reset the PCI FIFO of the Rx queue
+ *			- reset the RAM Buffer receive queue
+ *			- reset the MAC Rx FIFO
+ *		o switch Rx LED off, stop the LED counter
+ *
+ *	If all ports are stopped,
+ *		o reset the RAM Interface.
+ *
+ * Notes:
+ *	o This function may be called during the driver states RESET_PORT and
+ *	  SWITCH_PORT.
+ */
+void SkGeStopPort(
+SK_AC	*pAC,	/* adapter context */
+SK_IOC	IoC,	/* I/O context */
+int		Port,	/* port to stop (MAC_1 + n) */
+int		Dir,	/* Direction to Stop (SK_STOP_RX, SK_STOP_TX, SK_STOP_ALL) */
+int		RstMode)/* Reset Mode (SK_SOFT_RST, SK_HARD_RST) */
+{
+#ifndef SK_DIAG
+	SK_EVPARA Para;
+#endif /* !SK_DIAG */
+	SK_GEPORT *pPrt;
+	SK_U32	DWord;
+	SK_U32	XsCsr;
+	SK_U32	XaCsr;
+	SK_U64	ToutStart;
+	int		i;
+	int		ToutCnt;
+
+	pPrt = &pAC->GIni.GP[Port];
+
+	if ((Dir & SK_STOP_TX) != 0) {
+		/* disable receiver and transmitter */
+		SkMacRxTxDisable(pAC, IoC, Port);
+		
+		/* stop both transmit queues */
+		/*
+		 * If the BMU is in the reset state CSR_STOP will terminate
+		 * immediately.
+		 */
+		SK_OUT32(IoC, Q_ADDR(pPrt->PXsQOff, Q_CSR), CSR_STOP);
+		SK_OUT32(IoC, Q_ADDR(pPrt->PXaQOff, Q_CSR), CSR_STOP);
+
+		ToutStart = SkOsGetTime(pAC);
+		ToutCnt = 0;
+		do {
+			/*
+			 * Clear packet arbiter timeout to make sure
+			 * this loop will terminate.
+			 */
+			SK_OUT16(IoC, B3_PA_CTRL, (SK_U16)((Port == MAC_1) ?
+				PA_CLR_TO_TX1 : PA_CLR_TO_TX2));
+
+			/*
+			 * If the transfer stucks at the MAC the STOP command will not
+			 * terminate if we don't flush the XMAC's transmit FIFO !
+			 */
+			SkMacFlushTxFifo(pAC, IoC, Port);
+
+			XsCsr = TestStopBit(pAC, IoC, pPrt->PXsQOff);
+			XaCsr = TestStopBit(pAC, IoC, pPrt->PXaQOff);
+
+			if (SkOsGetTime(pAC) - ToutStart > (SK_TICKS_PER_SEC / 18)) {
+				/*
+				 * Timeout of 1/18 second reached.
+				 * This needs to be checked at 1/18 sec only.
+				 */
+				ToutCnt++;
+				if (ToutCnt > 1) {
+					/* Might be a problem when the driver event handler
+					 * calls StopPort again. XXX.
+					 */
+
+					/* Fatal Error, Loop aborted */
+					SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_HWI_E018,
+						SKERR_HWI_E018MSG);
+#ifndef SK_DIAG
+					Para.Para64 = Port;
+					SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para);
+#endif /* !SK_DIAG */
+					return;
+				}
+				/*
+				 * Cache incoherency workaround: Assume a start command
+				 * has been lost while sending the frame.
+				 */
+				ToutStart = SkOsGetTime(pAC);
+
+				if ((XsCsr & CSR_STOP) != 0) {
+					SK_OUT32(IoC, Q_ADDR(pPrt->PXsQOff, Q_CSR), CSR_START);
+				}
+				if ((XaCsr & CSR_STOP) != 0) {
+					SK_OUT32(IoC, Q_ADDR(pPrt->PXaQOff, Q_CSR), CSR_START);
+				}
+			}
+
+			/*
+			 * Because of the ASIC problem report entry from 21.08.1998 it is
+			 * required to wait until CSR_STOP is reset and CSR_SV_IDLE is set.
+			 */
+		} while ((XsCsr & (CSR_STOP | CSR_SV_IDLE)) != CSR_SV_IDLE ||
+				 (XaCsr & (CSR_STOP | CSR_SV_IDLE)) != CSR_SV_IDLE);
+
+		/* Reset the MAC depending on the RstMode */
+		if (RstMode == SK_SOFT_RST) {
+			SkMacSoftRst(pAC, IoC, Port);
+		}
+		else {
+			SkMacHardRst(pAC, IoC, Port);
+		}
+ 		
+		/* Disable Force Sync bit and Enable Alloc bit */
+		SK_OUT8(IoC, MR_ADDR(Port, TXA_CTRL),
+			TXA_DIS_FSYNC | TXA_DIS_ALLOC | TXA_STOP_RC);
+		
+		/* Stop Interval Timer and Limit Counter of Tx Arbiter */
+		SK_OUT32(IoC, MR_ADDR(Port, TXA_ITI_INI), 0L);
+		SK_OUT32(IoC, MR_ADDR(Port, TXA_LIM_INI), 0L);
+
+		/* Perform a local reset of the port's Tx path */
+
+		/* Reset the PCI FIFO of the async Tx queue */
+		SK_OUT32(IoC, Q_ADDR(pPrt->PXaQOff, Q_CSR), CSR_SET_RESET);
+		/* Reset the PCI FIFO of the sync Tx queue */
+		SK_OUT32(IoC, Q_ADDR(pPrt->PXsQOff, Q_CSR), CSR_SET_RESET);
+		/* Reset the RAM Buffer async Tx queue */
+		SK_OUT8(IoC, RB_ADDR(pPrt->PXaQOff, RB_CTRL), RB_RST_SET);
+		/* Reset the RAM Buffer sync Tx queue */
+		SK_OUT8(IoC, RB_ADDR(pPrt->PXsQOff, RB_CTRL), RB_RST_SET);
+		
+		/* Reset Tx MAC FIFO */
+#ifdef GENESIS
+		if (pAC->GIni.GIGenesis) {
+			/* Note: MFF_RST_SET does NOT reset the XMAC ! */
+			SK_OUT8(IoC, MR_ADDR(Port, TX_MFF_CTRL2), MFF_RST_SET);
+
+			/* switch Link and Tx LED off, stop the LED counters */
+			/* Link LED is switched off by the RLMT and the Diag itself */
+			SkGeXmitLED(pAC, IoC, MR_ADDR(Port, TX_LED_INI), SK_LED_DIS);
+		}
+#endif /* GENESIS */
+	
+#ifdef YUKON
+		if (pAC->GIni.GIYukon) {
+			/* Reset TX MAC FIFO */
+			SK_OUT8(IoC, MR_ADDR(Port, TX_GMF_CTRL_T), (SK_U8)GMF_RST_SET);
+		}
+#endif /* YUKON */
+	}
+
+	if ((Dir & SK_STOP_RX) != 0) {
+		/*
+		 * The RX Stop Command will not terminate if no buffers
+		 * are queued in the RxD ring. But it will always reach
+		 * the Idle state. Therefore we can use this feature to
+		 * stop the transfer of received packets.
+		 */
+		/* stop the port's receive queue */
+		SK_OUT32(IoC, Q_ADDR(pPrt->PRxQOff, Q_CSR), CSR_STOP);
+		
+		i = 100;
+		do {
+			/*
+			 * Clear packet arbiter timeout to make sure
+			 * this loop will terminate
+			 */
+			SK_OUT16(IoC, B3_PA_CTRL, (SK_U16)((Port == MAC_1) ?
+				PA_CLR_TO_RX1 : PA_CLR_TO_RX2));
+
+			DWord = TestStopBit(pAC, IoC, pPrt->PRxQOff);
+
+			/* timeout if i==0 (bug fix for #10748) */
+			if (--i == 0) {
+				SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_HWI_E024,
+					SKERR_HWI_E024MSG);
+				break;
+			}
+			/*
+			 * because of the ASIC problem report entry from 21.08.98
+			 * it is required to wait until CSR_STOP is reset and
+			 * CSR_SV_IDLE is set.
+			 */
+		} while ((DWord & (CSR_STOP | CSR_SV_IDLE)) != CSR_SV_IDLE);
+
+		/* The path data transfer activity is fully stopped now */
+
+		/* Perform a local reset of the port's Rx path */
+
+		 /*	Reset the PCI FIFO of the Rx queue */
+		SK_OUT32(IoC, Q_ADDR(pPrt->PRxQOff, Q_CSR), CSR_SET_RESET);
+		/* Reset the RAM Buffer receive queue */
+		SK_OUT8(IoC, RB_ADDR(pPrt->PRxQOff, RB_CTRL), RB_RST_SET);
+
+		/* Reset Rx MAC FIFO */
+#ifdef GENESIS
+		if (pAC->GIni.GIGenesis) {
+			
+			SK_OUT8(IoC, MR_ADDR(Port, RX_MFF_CTRL2), MFF_RST_SET);
+
+			/* switch Rx LED off, stop the LED counter */
+			SkGeXmitLED(pAC, IoC, MR_ADDR(Port, RX_LED_INI), SK_LED_DIS);
+		}
+#endif /* GENESIS */
+	
+#ifdef YUKON
+		if (pAC->GIni.GIYukon) {
+			/* Reset Rx MAC FIFO */
+			SK_OUT8(IoC, MR_ADDR(Port, RX_GMF_CTRL_T), (SK_U8)GMF_RST_SET);
+		}
+#endif /* YUKON */
+	}
+}	/* SkGeStopPort */
+
+
+/******************************************************************************
+ *
+ *	SkGeInit0() - Level 0 Initialization
+ *
+ * Description:
+ *	- Initialize the BMU address offsets
+ *
+ * Returns:
+ *	nothing
+ */
+static void SkGeInit0(
+SK_AC	*pAC,		/* adapter context */
+SK_IOC	IoC)		/* IO context */
+{
+	int i;
+	SK_GEPORT *pPrt;
+
+	for (i = 0; i < SK_MAX_MACS; i++) {
+		pPrt = &pAC->GIni.GP[i];
+
+		pPrt->PState = SK_PRT_RESET;
+		pPrt->PRxQOff = QOffTab[i].RxQOff;
+		pPrt->PXsQOff = QOffTab[i].XsQOff;
+		pPrt->PXaQOff = QOffTab[i].XaQOff;
+		pPrt->PCheckPar = SK_FALSE;
+		pPrt->PIsave = 0;
+		pPrt->PPrevShorts = 0;
+		pPrt->PLinkResCt = 0;
+		pPrt->PAutoNegTOCt = 0;
+		pPrt->PPrevRx = 0;
+		pPrt->PPrevFcs = 0;
+		pPrt->PRxLim = SK_DEF_RX_WA_LIM;
+		pPrt->PLinkMode = (SK_U8)SK_LMODE_AUTOFULL;
+		pPrt->PLinkSpeedCap = (SK_U8)SK_LSPEED_CAP_1000MBPS;
+		pPrt->PLinkSpeed = (SK_U8)SK_LSPEED_1000MBPS;
+		pPrt->PLinkSpeedUsed = (SK_U8)SK_LSPEED_STAT_UNKNOWN;
+		pPrt->PLinkModeConf = (SK_U8)SK_LMODE_AUTOSENSE;
+		pPrt->PFlowCtrlMode = (SK_U8)SK_FLOW_MODE_SYM_OR_REM;
+		pPrt->PLinkCap = (SK_U8)(SK_LMODE_CAP_HALF | SK_LMODE_CAP_FULL |
+			SK_LMODE_CAP_AUTOHALF | SK_LMODE_CAP_AUTOFULL);
+		pPrt->PLinkModeStatus = (SK_U8)SK_LMODE_STAT_UNKNOWN;
+		pPrt->PFlowCtrlCap = (SK_U8)SK_FLOW_MODE_SYM_OR_REM;
+		pPrt->PFlowCtrlStatus = (SK_U8)SK_FLOW_STAT_NONE;
+		pPrt->PMSCap = 0;
+		pPrt->PMSMode = (SK_U8)SK_MS_MODE_AUTO;
+		pPrt->PMSStatus = (SK_U8)SK_MS_STAT_UNSET;
+		pPrt->PLipaAutoNeg = (SK_U8)SK_LIPA_UNKNOWN;
+		pPrt->PAutoNegFail = SK_FALSE;
+		pPrt->PHWLinkUp = SK_FALSE;
+		pPrt->PLinkBroken = SK_TRUE; /* See WA code */
+		pPrt->PPhyPowerState = PHY_PM_OPERATIONAL_MODE;
+		pPrt->PMacColThres = TX_COL_DEF;
+		pPrt->PMacJamLen = TX_JAM_LEN_DEF;
+		pPrt->PMacJamIpgVal	= TX_JAM_IPG_DEF;
+		pPrt->PMacJamIpgData = TX_IPG_JAM_DEF;
+		pPrt->PMacIpgData = IPG_DATA_DEF;
+		pPrt->PMacLimit4 = SK_FALSE;
+	}
+
+	pAC->GIni.GIPortUsage = SK_RED_LINK;
+	pAC->GIni.GILedBlinkCtrl = (SK_U16)OemConfig.Value;
+	pAC->GIni.GIValIrqMask = IS_ALL_MSK;
+
+}	/* SkGeInit0*/
+
+
+/******************************************************************************
+ *
+ *	SkGeInit1() - Level 1 Initialization
+ *
+ * Description:
+ *	o Do a software reset.
+ *	o Clear all reset bits.
+ *	o Verify that the detected hardware is present.
+ *	  Return an error if not.
+ *	o Get the hardware configuration
+ *		+ Read the number of MACs/Ports.
+ *		+ Read the RAM size.
+ *		+ Read the PCI Revision Id.
+ *		+ Find out the adapters host clock speed
+ *		+ Read and check the PHY type
+ *
+ * Returns:
+ *	0:	success
+ *	5:	Unexpected PHY type detected
+ *	6:	HW self test failed
+ */
+static int SkGeInit1(
+SK_AC	*pAC,		/* adapter context */
+SK_IOC	IoC)		/* IO context */
+{
+	SK_U8	Byte;
+	SK_U16	Word;
+	SK_U16	CtrlStat;
+	SK_U32	DWord;
+	int	RetVal;
+	int	i;
+
+	RetVal = 0;
+
+	/* save CLK_RUN bits (YUKON-Lite) */
+	SK_IN16(IoC, B0_CTST, &CtrlStat);
+
+	/* do the SW-reset */
+	SK_OUT8(IoC, B0_CTST, CS_RST_SET);
+
+	/* release the SW-reset */
+	SK_OUT8(IoC, B0_CTST, CS_RST_CLR);
+
+	/* reset all error bits in the PCI STATUS register */
+	/*
+	 * Note: PCI Cfg cycles cannot be used, because they are not
+	 *		 available on some platforms after 'boot time'.
+	 */
+	SK_IN16(IoC, PCI_C(PCI_STATUS), &Word);
+	
+	SK_OUT8(IoC, B2_TST_CTRL1, TST_CFG_WRITE_ON);
+	SK_OUT16(IoC, PCI_C(PCI_STATUS), (SK_U16)(Word | PCI_ERRBITS));
+	SK_OUT8(IoC, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
+
+	/* release Master Reset */
+	SK_OUT8(IoC, B0_CTST, CS_MRST_CLR);
+
+#ifdef CLK_RUN
+	CtrlStat |= CS_CLK_RUN_ENA;
+#endif /* CLK_RUN */
+
+	/* restore CLK_RUN bits */
+	SK_OUT16(IoC, B0_CTST, (SK_U16)(CtrlStat &
+		(CS_CLK_RUN_HOT | CS_CLK_RUN_RST | CS_CLK_RUN_ENA)));
+
+	/* read Chip Identification Number */
+	SK_IN8(IoC, B2_CHIP_ID, &Byte);
+	pAC->GIni.GIChipId = Byte;
+	
+	/* read number of MACs */
+	SK_IN8(IoC, B2_MAC_CFG, &Byte);
+	pAC->GIni.GIMacsFound = (Byte & CFG_SNG_MAC) ? 1 : 2;
+	
+	/* get Chip Revision Number */
+	pAC->GIni.GIChipRev = (SK_U8)((Byte & CFG_CHIP_R_MSK) >> 4);
+
+	/* get diff. PCI parameters */
+	SK_IN16(IoC, B0_CTST, &CtrlStat);
+	
+	/* read the adapters RAM size */
+	SK_IN8(IoC, B2_E_0, &Byte);
+	
+	pAC->GIni.GIGenesis = SK_FALSE;
+	pAC->GIni.GIYukon = SK_FALSE;
+	pAC->GIni.GIYukonLite = SK_FALSE;
+
+#ifdef GENESIS
+	if (pAC->GIni.GIChipId == CHIP_ID_GENESIS) {
+
+		pAC->GIni.GIGenesis = SK_TRUE;
+
+		if (Byte == (SK_U8)3) {						
+			/* special case: 4 x 64k x 36, offset = 0x80000 */
+			pAC->GIni.GIRamSize = 1024;
+			pAC->GIni.GIRamOffs = (SK_U32)512 * 1024;
+		}
+		else {
+			pAC->GIni.GIRamSize = (int)Byte * 512;
+			pAC->GIni.GIRamOffs = 0;
+		}
+		/* all GE adapters work with 53.125 MHz host clock */
+		pAC->GIni.GIHstClkFact = SK_FACT_53;
+		
+		/* set Descr. Poll Timer Init Value to 250 ms */
+		pAC->GIni.GIPollTimerVal =
+			SK_DPOLL_DEF * (SK_U32)pAC->GIni.GIHstClkFact / 100;
+	}
+#endif /* GENESIS */
+	
+#ifdef YUKON
+	if (pAC->GIni.GIChipId != CHIP_ID_GENESIS) {
+		
+		pAC->GIni.GIYukon = SK_TRUE;
+		
+		pAC->GIni.GIRamSize = (Byte == (SK_U8)0) ? 128 : (int)Byte * 4;
+		
+		pAC->GIni.GIRamOffs = 0;
+		
+		/* WA for chip Rev. A */
+		pAC->GIni.GIWolOffs = (pAC->GIni.GIChipId == CHIP_ID_YUKON &&
+			pAC->GIni.GIChipRev == 0) ? WOL_REG_OFFS : 0;
+		
+		/* get PM Capabilities of PCI config space */
+		SK_IN16(IoC, PCI_C(PCI_PM_CAP_REG), &Word);
+
+		/* check if VAUX is available */
+		if (((CtrlStat & CS_VAUX_AVAIL) != 0) &&
+			/* check also if PME from D3cold is set */
+			((Word & PCI_PME_D3C_SUP) != 0)) {
+			/* set entry in GE init struct */
+			pAC->GIni.GIVauxAvail = SK_TRUE;
+		}
+		
+		if (pAC->GIni.GIChipId == CHIP_ID_YUKON_LITE) {
+			/* this is Rev. A1 */
+			pAC->GIni.GIYukonLite = SK_TRUE;
+		}
+		else {
+			/* save Flash-Address Register */
+			SK_IN32(IoC, B2_FAR, &DWord);
+
+			/* test Flash-Address Register */
+			SK_OUT8(IoC, B2_FAR + 3, 0xff);
+			SK_IN8(IoC, B2_FAR + 3, &Byte);
+
+			if (Byte != 0) {
+				/* this is Rev. A0 */
+				pAC->GIni.GIYukonLite = SK_TRUE;
+
+				/* restore Flash-Address Register */
+				SK_OUT32(IoC, B2_FAR, DWord);
+			}
+		}
+
+		/* switch power to VCC (WA for VAUX problem) */
+		SK_OUT8(IoC, B0_POWER_CTRL, (SK_U8)(PC_VAUX_ENA | PC_VCC_ENA |
+			PC_VAUX_OFF | PC_VCC_ON));
+
+		/* read the Interrupt source */
+		SK_IN32(IoC, B0_ISRC, &DWord);
+		
+		if ((DWord & IS_HW_ERR) != 0) {
+			/* read the HW Error Interrupt source */
+			SK_IN32(IoC, B0_HWE_ISRC, &DWord);
+			
+			if ((DWord & IS_IRQ_SENSOR) != 0) {
+				/* disable HW Error IRQ */
+				pAC->GIni.GIValIrqMask &= ~IS_HW_ERR;
+			}
+		}
+		
+		for (i = 0; i < pAC->GIni.GIMacsFound; i++) {
+			/* set GMAC Link Control reset */
+			SK_OUT16(IoC, MR_ADDR(i, GMAC_LINK_CTRL), GMLC_RST_SET);
+
+			/* clear GMAC Link Control reset */
+			SK_OUT16(IoC, MR_ADDR(i, GMAC_LINK_CTRL), GMLC_RST_CLR);
+		}
+		/* all YU chips work with 78.125 MHz host clock */
+		pAC->GIni.GIHstClkFact = SK_FACT_78;
+		
+		pAC->GIni.GIPollTimerVal = SK_DPOLL_MAX;	/* 215 ms */
+	}
+#endif /* YUKON */
+
+	/* check if 64-bit PCI Slot is present */
+	pAC->GIni.GIPciSlot64 = (SK_BOOL)((CtrlStat & CS_BUS_SLOT_SZ) != 0);
+	
+	/* check if 66 MHz PCI Clock is active */
+	pAC->GIni.GIPciClock66 = (SK_BOOL)((CtrlStat & CS_BUS_CLOCK) != 0);
+
+	/* read PCI HW Revision Id. */
+	SK_IN8(IoC, PCI_C(PCI_REV_ID), &Byte);
+	pAC->GIni.GIPciHwRev = Byte;
+
+	/* read the PMD type */
+	SK_IN8(IoC, B2_PMD_TYP, &Byte);
+	pAC->GIni.GICopperType = (SK_U8)(Byte == 'T');
+
+	/* read the PHY type */
+	SK_IN8(IoC, B2_E_1, &Byte);
+
+	Byte &= 0x0f;	/* the PHY type is stored in the lower nibble */
+	for (i = 0; i < pAC->GIni.GIMacsFound; i++) {
+		
+#ifdef GENESIS
+		if (pAC->GIni.GIGenesis) {
+			switch (Byte) {
+			case SK_PHY_XMAC:
+				pAC->GIni.GP[i].PhyAddr = PHY_ADDR_XMAC;
+				break;
+			case SK_PHY_BCOM:
+				pAC->GIni.GP[i].PhyAddr = PHY_ADDR_BCOM;
+				pAC->GIni.GP[i].PMSCap = (SK_U8)(SK_MS_CAP_AUTO |
+					SK_MS_CAP_MASTER | SK_MS_CAP_SLAVE);
+				break;
+#ifdef OTHER_PHY
+			case SK_PHY_LONE:
+				pAC->GIni.GP[i].PhyAddr = PHY_ADDR_LONE;
+				break;
+			case SK_PHY_NAT:
+				pAC->GIni.GP[i].PhyAddr = PHY_ADDR_NAT;
+				break;
+#endif /* OTHER_PHY */
+			default:
+				/* ERROR: unexpected PHY type detected */
+				RetVal = 5;
+				break;
+			}
+		}
+#endif /* GENESIS */
+	
+#ifdef YUKON
+		if (pAC->GIni.GIYukon) {
+			
+			if (Byte < (SK_U8)SK_PHY_MARV_COPPER) {
+				/* if this field is not initialized */
+				Byte = (SK_U8)SK_PHY_MARV_COPPER;
+				
+				pAC->GIni.GICopperType = SK_TRUE;
+			}
+			
+			pAC->GIni.GP[i].PhyAddr = PHY_ADDR_MARV;
+			
+			if (pAC->GIni.GICopperType) {
+
+				pAC->GIni.GP[i].PLinkSpeedCap = (SK_U8)(SK_LSPEED_CAP_AUTO |
+					SK_LSPEED_CAP_10MBPS | SK_LSPEED_CAP_100MBPS |
+					SK_LSPEED_CAP_1000MBPS);
+				
+				pAC->GIni.GP[i].PLinkSpeed = (SK_U8)SK_LSPEED_AUTO;
+				
+				pAC->GIni.GP[i].PMSCap = (SK_U8)(SK_MS_CAP_AUTO |
+					SK_MS_CAP_MASTER | SK_MS_CAP_SLAVE);
+			}
+			else {
+				Byte = (SK_U8)SK_PHY_MARV_FIBER;
+			}
+		}
+#endif /* YUKON */
+		
+		pAC->GIni.GP[i].PhyType = (int)Byte;
+		
+		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_INIT,
+			("PHY type: %d  PHY addr: %04x\n", Byte,
+			pAC->GIni.GP[i].PhyAddr));
+	}
+	
+	/* get MAC Type & set function pointers dependent on */
+#ifdef GENESIS
+	if (pAC->GIni.GIGenesis) {
+		
+		pAC->GIni.GIMacType = SK_MAC_XMAC;
+
+		pAC->GIni.GIFunc.pFnMacUpdateStats	= SkXmUpdateStats;
+		pAC->GIni.GIFunc.pFnMacStatistic	= SkXmMacStatistic;
+		pAC->GIni.GIFunc.pFnMacResetCounter	= SkXmResetCounter;
+		pAC->GIni.GIFunc.pFnMacOverflow		= SkXmOverflowStatus;
+	}
+#endif /* GENESIS */
+	
+#ifdef YUKON
+	if (pAC->GIni.GIYukon) {
+		
+		pAC->GIni.GIMacType = SK_MAC_GMAC;
+
+		pAC->GIni.GIFunc.pFnMacUpdateStats	= SkGmUpdateStats;
+		pAC->GIni.GIFunc.pFnMacStatistic	= SkGmMacStatistic;
+		pAC->GIni.GIFunc.pFnMacResetCounter	= SkGmResetCounter;
+		pAC->GIni.GIFunc.pFnMacOverflow		= SkGmOverflowStatus;
+
+#ifdef SPECIAL_HANDLING
+		if (pAC->GIni.GIChipId == CHIP_ID_YUKON) {
+			/* check HW self test result */
+			SK_IN8(IoC, B2_E_3, &Byte);
+			if (Byte & B2_E3_RES_MASK) {
+				RetVal = 6;
+			}
+		}
+#endif
+	}
+#endif /* YUKON */
+	
+	return(RetVal);
+}	/* SkGeInit1 */
+
+
+/******************************************************************************
+ *
+ *	SkGeInit2() - Level 2 Initialization
+ *
+ * Description:
+ *	- start the Blink Source Counter
+ *	- start the Descriptor Poll Timer
+ *	- configure the MAC-Arbiter
+ *	- configure the Packet-Arbiter
+ *	- enable the Tx Arbiters
+ *	- enable the RAM Interface Arbiter
+ *
+ * Returns:
+ *	nothing
+ */
+static void SkGeInit2(
+SK_AC	*pAC,		/* adapter context */
+SK_IOC	IoC)		/* IO context */
+{
+#ifdef GENESIS
+	SK_U32	DWord;
+#endif /* GENESIS */
+	int		i;
+
+	/* start the Descriptor Poll Timer */
+	if (pAC->GIni.GIPollTimerVal != 0) {
+		if (pAC->GIni.GIPollTimerVal > SK_DPOLL_MAX) {
+			pAC->GIni.GIPollTimerVal = SK_DPOLL_MAX;
+
+			SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E017, SKERR_HWI_E017MSG);
+		}
+		SK_OUT32(IoC, B28_DPT_INI, pAC->GIni.GIPollTimerVal);
+		SK_OUT8(IoC, B28_DPT_CTRL, DPT_START);
+	}
+
+#ifdef GENESIS
+	if (pAC->GIni.GIGenesis) {
+		/* start the Blink Source Counter */
+		DWord = SK_BLK_DUR * (SK_U32)pAC->GIni.GIHstClkFact / 100;
+
+		SK_OUT32(IoC, B2_BSC_INI, DWord);
+		SK_OUT8(IoC, B2_BSC_CTRL, BSC_START);
+
+		/*
+		 * Configure the MAC Arbiter and the Packet Arbiter.
+		 * They will be started once and never be stopped.
+		 */
+		SkGeInitMacArb(pAC, IoC);
+
+		SkGeInitPktArb(pAC, IoC);
+	}
+#endif /* GENESIS */
+	
+#ifdef YUKON
+	if (pAC->GIni.GIYukon) {
+		/* start Time Stamp Timer */
+		SK_OUT8(IoC, GMAC_TI_ST_CTRL, (SK_U8)GMT_ST_START);
+	}
+#endif /* YUKON */
+
+	/* enable the Tx Arbiters */
+	for (i = 0; i < pAC->GIni.GIMacsFound; i++) {
+		SK_OUT8(IoC, MR_ADDR(i, TXA_CTRL), TXA_ENA_ARB);
+	}
+
+	/* enable the RAM Interface Arbiter */
+	SkGeInitRamIface(pAC, IoC);
+
+}	/* SkGeInit2 */
+
+/******************************************************************************
+ *
+ *	SkGeInit() - Initialize the GE Adapter with the specified level.
+ *
+ * Description:
+ *	Level	0:	Initialize the Module structures.
+ *	Level	1:	Generic Hardware Initialization. The IOP/MemBase pointer has
+ *				to be set before calling this level.
+ *
+ *			o Do a software reset.
+ *			o Clear all reset bits.
+ *			o Verify that the detected hardware is present.
+ *			  Return an error if not.
+ *			o Get the hardware configuration
+ *				+ Set GIMacsFound with the number of MACs.
+ *				+ Store the RAM size in GIRamSize.
+ *				+ Save the PCI Revision ID in GIPciHwRev.
+ *			o return an error
+ *				if Number of MACs > SK_MAX_MACS
+ *
+ *			After returning from Level 0 the adapter
+ *			may be accessed with IO operations.
+ *
+ *	Level	2:	start the Blink Source Counter
+ *
+ * Returns:
+ *	0:	success
+ *	1:	Number of MACs exceeds SK_MAX_MACS	(after level 1)
+ *	2:	Adapter not present or not accessible
+ *	3:	Illegal initialization level
+ *	4:	Initialization Level 1 Call missing
+ *	5:	Unexpected PHY type detected
+ *	6:	HW self test failed
+ */
+int	SkGeInit(
+SK_AC	*pAC,		/* adapter context */
+SK_IOC	IoC,		/* IO context */
+int		Level)		/* initialization level */
+{
+	int		RetVal;		/* return value */
+	SK_U32	DWord;
+
+	RetVal = 0;
+	SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_INIT,
+		("SkGeInit(Level %d)\n", Level));
+
+	switch (Level) {
+	case SK_INIT_DATA:
+		/* Initialization Level 0 */
+		SkGeInit0(pAC, IoC);
+		pAC->GIni.GILevel = SK_INIT_DATA;
+		break;
+	
+	case SK_INIT_IO:
+		/* Initialization Level 1 */
+		RetVal = SkGeInit1(pAC, IoC);
+		if (RetVal != 0) {
+			break;
+		}
+
+		/* check if the adapter seems to be accessible */
+		SK_OUT32(IoC, B2_IRQM_INI, SK_TEST_VAL);
+		SK_IN32(IoC, B2_IRQM_INI, &DWord);
+		SK_OUT32(IoC, B2_IRQM_INI, 0L);
+		
+		if (DWord != SK_TEST_VAL) {
+			RetVal = 2;
+			break;
+		}
+
+		/* check if the number of GIMacsFound matches SK_MAX_MACS */
+		if (pAC->GIni.GIMacsFound > SK_MAX_MACS) {
+			RetVal = 1;
+			break;
+		}
+
+		/* Level 1 successfully passed */
+		pAC->GIni.GILevel = SK_INIT_IO;
+		break;
+	
+	case SK_INIT_RUN:
+		/* Initialization Level 2 */
+		if (pAC->GIni.GILevel != SK_INIT_IO) {
+#ifndef SK_DIAG
+			SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E002, SKERR_HWI_E002MSG);
+#endif /* !SK_DIAG */
+			RetVal = 4;
+			break;
+		}
+		SkGeInit2(pAC, IoC);
+
+		/* Level 2 successfully passed */
+		pAC->GIni.GILevel = SK_INIT_RUN;
+		break;
+	
+	default:
+		SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E003, SKERR_HWI_E003MSG);
+		RetVal = 3;
+		break;
+	}
+
+	return(RetVal);
+}	/* SkGeInit */
+
+
+/******************************************************************************
+ *
+ *	SkGeDeInit() - Deinitialize the adapter
+ *
+ * Description:
+ *	All ports of the adapter will be stopped if not already done.
+ *	Do a software reset and switch off all LEDs.
+ *
+ * Returns:
+ *	nothing
+ */
+void SkGeDeInit(
+SK_AC	*pAC,		/* adapter context */
+SK_IOC	IoC)		/* IO context */
+{
+	int	i;
+	SK_U16	Word;
+
+#if (!defined(SK_SLIM) && !defined(VCPU))
+	/* ensure I2C is ready */
+	SkI2cWaitIrq(pAC, IoC);
+#endif	
+
+	/* stop all current transfer activity */
+	for (i = 0; i < pAC->GIni.GIMacsFound; i++) {
+		if (pAC->GIni.GP[i].PState != SK_PRT_STOP &&
+			pAC->GIni.GP[i].PState != SK_PRT_RESET) {
+
+			SkGeStopPort(pAC, IoC, i, SK_STOP_ALL, SK_HARD_RST);
+		}
+	}
+
+	/* Reset all bits in the PCI STATUS register */
+	/*
+	 * Note: PCI Cfg cycles cannot be used, because they are not
+	 *	 available on some platforms after 'boot time'.
+	 */
+	SK_IN16(IoC, PCI_C(PCI_STATUS), &Word);
+	
+	SK_OUT8(IoC, B2_TST_CTRL1, TST_CFG_WRITE_ON);
+	SK_OUT16(IoC, PCI_C(PCI_STATUS), (SK_U16)(Word | PCI_ERRBITS));
+	SK_OUT8(IoC, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
+
+	/* do the reset, all LEDs are switched off now */
+	SK_OUT8(IoC, B0_CTST, CS_RST_SET);
+	
+	pAC->GIni.GILevel = SK_INIT_DATA;
+}	/* SkGeDeInit */
+
+
+/******************************************************************************
+ *
+ *	SkGeInitPort()	Initialize the specified port.
+ *
+ * Description:
+ *	PRxQSize, PXSQSize, and PXAQSize has to be
+ *	configured for the specified port before calling this function.
+ *  The descriptor rings has to be initialized too.
+ *
+ *	o (Re)configure queues of the specified port.
+ *	o configure the MAC of the specified port.
+ *	o put ASIC and MAC(s) in operational mode.
+ *	o initialize Rx/Tx and Sync LED
+ *	o initialize RAM Buffers and MAC FIFOs
+ *
+ *	The port is ready to connect when returning.
+ *
+ * Note:
+ *	The MAC's Rx and Tx state machine is still disabled when returning.
+ *
+ * Returns:
+ *	0:	success
+ *	1:	Queue size initialization error. The configured values
+ *		for PRxQSize, PXSQSize, or PXAQSize are invalid for one
+ *		or more queues. The specified port was NOT initialized.
+ *		An error log entry was generated.
+ *	2:	The port has to be stopped before it can be initialized again.
+ */
+int SkGeInitPort(
+SK_AC	*pAC,		/* adapter context */
+SK_IOC	IoC,		/* IO context */
+int		Port)		/* Port to configure */
+{
+	SK_GEPORT *pPrt;
+
+	pPrt = &pAC->GIni.GP[Port];
+
+	if (SkGeCheckQSize(pAC, Port) != 0) {
+		SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E004, SKERR_HWI_E004MSG);
+		return(1);
+	}
+	
+	if (pPrt->PState == SK_PRT_INIT || pPrt->PState == SK_PRT_RUN) {
+		SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E005, SKERR_HWI_E005MSG);
+		return(2);
+	}
+
+	/* configuration ok, initialize the Port now */
+
+#ifdef GENESIS
+	if (pAC->GIni.GIGenesis) {
+		/* initialize Rx, Tx and Link LED */
+		/*
+		 * If 1000BT Phy needs LED initialization than swap
+		 * LED and XMAC initialization order
+		 */
+		SkGeXmitLED(pAC, IoC, MR_ADDR(Port, TX_LED_INI), SK_LED_ENA);
+		SkGeXmitLED(pAC, IoC, MR_ADDR(Port, RX_LED_INI), SK_LED_ENA);
+		/* The Link LED is initialized by RLMT or Diagnostics itself */
+		
+		SkXmInitMac(pAC, IoC, Port);
+	}
+#endif /* GENESIS */
+	
+#ifdef YUKON
+	if (pAC->GIni.GIYukon) {
+
+		SkGmInitMac(pAC, IoC, Port);
+	}
+#endif /* YUKON */
+	
+	/* do NOT initialize the Link Sync Counter */
+
+	SkGeInitMacFifo(pAC, IoC, Port);
+	
+	SkGeInitRamBufs(pAC, IoC, Port);
+	
+	if (pPrt->PXSQSize != 0) {
+		/* enable Force Sync bit if synchronous queue available */
+		SK_OUT8(IoC, MR_ADDR(Port, TXA_CTRL), TXA_ENA_FSYNC);
+	}
+	
+	SkGeInitBmu(pAC, IoC, Port);
+
+	/* mark port as initialized */
+	pPrt->PState = SK_PRT_INIT;
+
+	return(0);
+}	/* SkGeInitPort */
diff --git a/drivers/net/sk98lin/skgemib.c b/drivers/net/sk98lin/skgemib.c
new file mode 100644
index 0000000..0a6f67a
--- /dev/null
+++ b/drivers/net/sk98lin/skgemib.c
@@ -0,0 +1,1075 @@
+/*****************************************************************************
+ *
+ * Name:	skgemib.c
+ * Project:	GEnesis, PCI Gigabit Ethernet Adapter
+ * Version:	$Revision: 1.11 $
+ * Date:	$Date: 2003/09/15 13:38:12 $
+ * Purpose:	Private Network Management Interface Management Database
+ *
+ ****************************************************************************/
+
+/******************************************************************************
+ *
+ *	(C)Copyright 1998-2002 SysKonnect GmbH.
+ *	(C)Copyright 2002-2003 Marvell.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/*
+ * PRIVATE OID handler function prototypes
+ */
+PNMI_STATIC int Addr(SK_AC *pAC, SK_IOC IoC, int action,
+	SK_U32 Id, char *pBuf, unsigned int *pLen, SK_U32 Instance,
+	unsigned int TableIndex, SK_U32 NetIndex);
+PNMI_STATIC int CsumStat(SK_AC *pAC, SK_IOC IoC, int action, SK_U32 Id,
+	char *pBuf, unsigned int *pLen, SK_U32 Instance,
+	unsigned int TableIndex, SK_U32 NetIndex);
+PNMI_STATIC int General(SK_AC *pAC, SK_IOC IoC, int action, SK_U32 Id,
+	char *pBuf, unsigned int *pLen, SK_U32 Instance,
+	unsigned int TableIndex, SK_U32 NetIndex);
+PNMI_STATIC int Mac8023Stat(SK_AC *pAC, SK_IOC IoC, int action, SK_U32 Id,
+	char *pBuf, unsigned int *pLen, SK_U32 Instance,
+	unsigned int TableIndex, SK_U32 NetIndex);
+PNMI_STATIC int MacPrivateConf(SK_AC *pAC, SK_IOC IoC, int action, SK_U32 Id,
+	char *pBuf, unsigned int *pLen, SK_U32 Instance,
+	unsigned int TableIndex, SK_U32 NetIndex);
+PNMI_STATIC int MacPrivateStat(SK_AC *pAC, SK_IOC IoC, int action, SK_U32 Id,
+	char *pBuf, unsigned int *pLen, SK_U32 Instance,
+	unsigned int TableIndex, SK_U32 NetIndex);
+PNMI_STATIC int Monitor(SK_AC *pAC, SK_IOC IoC, int action,
+	SK_U32 Id, char *pBuf, unsigned int *pLen, SK_U32 Instance,
+	unsigned int TableIndex, SK_U32 NetIndex);
+PNMI_STATIC int OidStruct(SK_AC *pAC, SK_IOC IoC, int action, SK_U32 Id,
+	char *pBuf, unsigned int *pLen, SK_U32 Instance,
+	unsigned int TableIndex, SK_U32 NetIndex);
+PNMI_STATIC int Perform(SK_AC *pAC, SK_IOC IoC, int action, SK_U32 Id,
+	char *pBuf, unsigned int* pLen, SK_U32 Instance,
+	unsigned int TableIndex, SK_U32 NetIndex);
+PNMI_STATIC int Rlmt(SK_AC *pAC, SK_IOC IoC, int action, SK_U32 Id,
+	char *pBuf, unsigned int *pLen, SK_U32 Instance,
+	unsigned int TableIndex, SK_U32 NetIndex);
+PNMI_STATIC int RlmtStat(SK_AC *pAC, SK_IOC IoC, int action, SK_U32 Id,
+	char *pBuf, unsigned int *pLen, SK_U32 Instance,
+	unsigned int TableIndex, SK_U32 NetIndex);
+PNMI_STATIC int SensorStat(SK_AC *pAC, SK_IOC IoC, int action, SK_U32 Id,
+	char *pBuf, unsigned int *pLen, SK_U32 Instance,
+	unsigned int TableIndex, SK_U32 NetIndex);
+PNMI_STATIC int Vpd(SK_AC *pAC, SK_IOC IoC, int action, SK_U32 Id,
+	char *pBuf, unsigned int *pLen, SK_U32 Instance,
+	unsigned int TableIndex, SK_U32 NetIndex);
+PNMI_STATIC int Vct(SK_AC *pAC, SK_IOC IoC, int action, SK_U32 Id,
+	char *pBuf, unsigned int *pLen, SK_U32 Instance,
+	unsigned int TableIndex, SK_U32 NetIndex);
+
+#ifdef SK_POWER_MGMT
+PNMI_STATIC int PowerManagement(SK_AC *pAC, SK_IOC IoC, int action, SK_U32 Id,
+	char *pBuf, unsigned int *pLen, SK_U32 Instance,
+	unsigned int TableIndex, SK_U32 NetIndex);
+#endif /* SK_POWER_MGMT */
+
+#ifdef SK_DIAG_SUPPORT
+PNMI_STATIC int DiagActions(SK_AC *pAC, SK_IOC IoC, int action, SK_U32 Id,
+	char *pBuf, unsigned int *pLen, SK_U32 Instance,
+	unsigned int TableIndex, SK_U32 NetIndex);
+#endif /* SK_DIAG_SUPPORT */
+
+
+/* defines *******************************************************************/
+#define ID_TABLE_SIZE (sizeof(IdTable)/sizeof(IdTable[0]))
+
+
+/* global variables **********************************************************/
+
+/*
+ * Table to correlate OID with handler function and index to
+ * hardware register stored in StatAddress if applicable.
+ */
+PNMI_STATIC const SK_PNMI_TAB_ENTRY IdTable[] = {
+	{OID_GEN_XMIT_OK,
+		0,
+		0,
+		0,
+		SK_PNMI_RO, Mac8023Stat, SK_PNMI_HTX},
+	{OID_GEN_RCV_OK,
+		0,
+		0,
+		0,
+		SK_PNMI_RO, Mac8023Stat, SK_PNMI_HRX},
+	{OID_GEN_XMIT_ERROR,
+		0,
+		0,
+		0,
+		SK_PNMI_RO, General, 0},
+	{OID_GEN_RCV_ERROR,
+		0,
+		0,
+		0,
+		SK_PNMI_RO, General, 0},
+	{OID_GEN_RCV_NO_BUFFER,
+		0,
+		0,
+		0,
+		SK_PNMI_RO, General, 0},
+	{OID_GEN_DIRECTED_FRAMES_XMIT,
+		0,
+		0,
+		0,
+		SK_PNMI_RO, Mac8023Stat, SK_PNMI_HTX_UNICAST},
+	{OID_GEN_MULTICAST_FRAMES_XMIT,
+		0,
+		0,
+		0,
+		SK_PNMI_RO, Mac8023Stat, SK_PNMI_HTX_MULTICAST},
+	{OID_GEN_BROADCAST_FRAMES_XMIT,
+		0,
+		0,
+		0,
+		SK_PNMI_RO, Mac8023Stat, SK_PNMI_HTX_BROADCAST},
+	{OID_GEN_DIRECTED_FRAMES_RCV,
+		0,
+		0,
+		0,
+		SK_PNMI_RO, Mac8023Stat, SK_PNMI_HRX_UNICAST},
+	{OID_GEN_MULTICAST_FRAMES_RCV,
+		0,
+		0,
+		0,
+		SK_PNMI_RO, Mac8023Stat, SK_PNMI_HRX_MULTICAST},
+	{OID_GEN_BROADCAST_FRAMES_RCV,
+		0,
+		0,
+		0,
+		SK_PNMI_RO, Mac8023Stat, SK_PNMI_HRX_BROADCAST},
+	{OID_GEN_RCV_CRC_ERROR,
+		0,
+		0,
+		0,
+		SK_PNMI_RO, Mac8023Stat, SK_PNMI_HRX_FCS},
+	{OID_GEN_TRANSMIT_QUEUE_LENGTH,
+		0,
+		0,
+		0,
+		SK_PNMI_RO, General, 0},
+	{OID_802_3_PERMANENT_ADDRESS,
+		0,
+		0,
+		0,
+		SK_PNMI_RO, Mac8023Stat, 0},
+	{OID_802_3_CURRENT_ADDRESS,
+		0,
+		0,
+		0,
+		SK_PNMI_RO, Mac8023Stat, 0},
+	{OID_802_3_RCV_ERROR_ALIGNMENT,
+		0,
+		0,
+		0,
+		SK_PNMI_RO, Mac8023Stat, SK_PNMI_HRX_FRAMING},
+	{OID_802_3_XMIT_ONE_COLLISION,
+		0,
+		0,
+		0,
+		SK_PNMI_RO, Mac8023Stat, SK_PNMI_HTX_SINGLE_COL},
+	{OID_802_3_XMIT_MORE_COLLISIONS,
+		0,
+		0,
+		0,
+		SK_PNMI_RO, Mac8023Stat, SK_PNMI_HTX_MULTI_COL},
+	{OID_802_3_XMIT_DEFERRED,
+		0,
+		0,
+		0,
+		SK_PNMI_RO, Mac8023Stat, SK_PNMI_HTX_DEFFERAL},
+	{OID_802_3_XMIT_MAX_COLLISIONS,
+		0,
+		0,
+		0,
+		SK_PNMI_RO, Mac8023Stat, SK_PNMI_HTX_EXCESS_COL},
+	{OID_802_3_RCV_OVERRUN,
+		0,
+		0,
+		0,
+		SK_PNMI_RO, Mac8023Stat, SK_PNMI_HRX_OVERFLOW},
+	{OID_802_3_XMIT_UNDERRUN,
+		0,
+		0,
+		0,
+		SK_PNMI_RO, Mac8023Stat, SK_PNMI_HTX_UNDERRUN},
+	{OID_802_3_XMIT_TIMES_CRS_LOST,
+		0,
+		0,
+		0,
+		SK_PNMI_RO, Mac8023Stat, SK_PNMI_HTX_CARRIER},
+	{OID_802_3_XMIT_LATE_COLLISIONS,
+		0,
+		0,
+		0,
+		SK_PNMI_RO, Mac8023Stat, SK_PNMI_HTX_LATE_COL},
+#ifdef SK_POWER_MGMT
+	{OID_PNP_CAPABILITIES,
+		0,
+		0,
+		0,
+		SK_PNMI_RO, PowerManagement, 0},
+	{OID_PNP_SET_POWER,
+		0,
+		0,
+		0,
+		SK_PNMI_WO, PowerManagement, 0},
+	{OID_PNP_QUERY_POWER,
+		0,
+		0,
+		0,
+		SK_PNMI_RO, PowerManagement, 0},
+	{OID_PNP_ADD_WAKE_UP_PATTERN,
+		0,
+		0,
+		0,
+		SK_PNMI_WO, PowerManagement, 0},
+	{OID_PNP_REMOVE_WAKE_UP_PATTERN,
+		0,
+		0,
+		0,
+		SK_PNMI_WO, PowerManagement, 0},
+	{OID_PNP_ENABLE_WAKE_UP,
+		0,
+		0,
+		0,
+		SK_PNMI_RW, PowerManagement, 0},
+#endif /* SK_POWER_MGMT */
+#ifdef SK_DIAG_SUPPORT
+	{OID_SKGE_DIAG_MODE,
+		0,
+		0,
+		0,
+		SK_PNMI_RW, DiagActions, 0},
+#endif /* SK_DIAG_SUPPORT */
+	{OID_SKGE_MDB_VERSION,
+		1,
+		0,
+		SK_PNMI_MAI_OFF(MgmtDBVersion),
+		SK_PNMI_RO, General, 0},
+	{OID_SKGE_SUPPORTED_LIST,
+		0,
+		0,
+		0,
+		SK_PNMI_RO, General, 0},
+	{OID_SKGE_ALL_DATA,
+		0,
+		0,
+		0,
+		SK_PNMI_RW, OidStruct, 0},
+	{OID_SKGE_VPD_FREE_BYTES,
+		1,
+		0,
+		SK_PNMI_MAI_OFF(VpdFreeBytes),
+		SK_PNMI_RO, Vpd, 0},
+	{OID_SKGE_VPD_ENTRIES_LIST,
+		1,
+		0,
+		SK_PNMI_MAI_OFF(VpdEntriesList),
+		SK_PNMI_RO, Vpd, 0},
+	{OID_SKGE_VPD_ENTRIES_NUMBER,
+		1,
+		0,
+		SK_PNMI_MAI_OFF(VpdEntriesNumber),
+		SK_PNMI_RO, Vpd, 0},
+	{OID_SKGE_VPD_KEY,
+		SK_PNMI_VPD_ENTRIES,
+		sizeof(SK_PNMI_VPD),
+		SK_PNMI_OFF(Vpd) + SK_PNMI_VPD_OFF(VpdKey),
+		SK_PNMI_RO, Vpd, 0},
+	{OID_SKGE_VPD_VALUE,
+		SK_PNMI_VPD_ENTRIES,
+		sizeof(SK_PNMI_VPD),
+		SK_PNMI_OFF(Vpd) + SK_PNMI_VPD_OFF(VpdValue),
+		SK_PNMI_RO, Vpd, 0},
+	{OID_SKGE_VPD_ACCESS,
+		SK_PNMI_VPD_ENTRIES,
+		sizeof(SK_PNMI_VPD),
+		SK_PNMI_OFF(Vpd) + SK_PNMI_VPD_OFF(VpdAccess),
+		SK_PNMI_RO, Vpd, 0},
+	{OID_SKGE_VPD_ACTION,
+		SK_PNMI_VPD_ENTRIES,
+		sizeof(SK_PNMI_VPD),
+		SK_PNMI_OFF(Vpd) + SK_PNMI_VPD_OFF(VpdAction),
+		SK_PNMI_RW, Vpd, 0},
+	{OID_SKGE_PORT_NUMBER,		
+		1,
+		0,
+		SK_PNMI_MAI_OFF(PortNumber),
+		SK_PNMI_RO, General, 0},
+	{OID_SKGE_DEVICE_TYPE,
+		1,
+		0,
+		SK_PNMI_MAI_OFF(DeviceType),
+		SK_PNMI_RO, General, 0},
+	{OID_SKGE_DRIVER_DESCR,
+		1,
+		0,
+		SK_PNMI_MAI_OFF(DriverDescr),
+		SK_PNMI_RO, General, 0},
+	{OID_SKGE_DRIVER_VERSION,
+		1,
+		0,
+		SK_PNMI_MAI_OFF(DriverVersion),
+		SK_PNMI_RO, General, 0},
+	{OID_SKGE_DRIVER_RELDATE,
+		1,
+		0,
+		SK_PNMI_MAI_OFF(DriverReleaseDate),
+		SK_PNMI_RO, General, 0},
+	{OID_SKGE_DRIVER_FILENAME,
+		1,
+		0,
+		SK_PNMI_MAI_OFF(DriverFileName),
+		SK_PNMI_RO, General, 0},
+	{OID_SKGE_HW_DESCR,
+		1,
+		0,
+		SK_PNMI_MAI_OFF(HwDescr),
+		SK_PNMI_RO, General, 0},
+	{OID_SKGE_HW_VERSION,
+		1,
+		0,
+		SK_PNMI_MAI_OFF(HwVersion),
+		SK_PNMI_RO, General, 0},
+	{OID_SKGE_CHIPSET,
+		1,
+		0,
+		SK_PNMI_MAI_OFF(Chipset),
+		SK_PNMI_RO, General, 0},
+	{OID_SKGE_CHIPID,
+		1,
+		0,
+		SK_PNMI_MAI_OFF(ChipId),
+		SK_PNMI_RO, General, 0},
+	{OID_SKGE_RAMSIZE,
+		1,
+		0,
+		SK_PNMI_MAI_OFF(RamSize),
+		SK_PNMI_RO, General, 0},
+	{OID_SKGE_VAUXAVAIL,
+		1,
+		0,
+		SK_PNMI_MAI_OFF(VauxAvail),
+		SK_PNMI_RO, General, 0},
+	{OID_SKGE_ACTION,
+		1,
+		0,
+		SK_PNMI_MAI_OFF(Action),
+		SK_PNMI_RW, Perform, 0},
+	{OID_SKGE_RESULT,
+		1,
+		0,
+		SK_PNMI_MAI_OFF(TestResult),
+		SK_PNMI_RO, General, 0},
+	{OID_SKGE_BUS_TYPE,
+		1,
+		0,
+		SK_PNMI_MAI_OFF(BusType),
+		SK_PNMI_RO, General, 0},
+	{OID_SKGE_BUS_SPEED,
+		1,
+		0,
+		SK_PNMI_MAI_OFF(BusSpeed),
+		SK_PNMI_RO, General, 0},
+	{OID_SKGE_BUS_WIDTH,
+		1,
+		0,
+		SK_PNMI_MAI_OFF(BusWidth),
+		SK_PNMI_RO, General, 0},
+	{OID_SKGE_TX_SW_QUEUE_LEN,
+		1,
+		0,
+		SK_PNMI_MAI_OFF(TxSwQueueLen),
+		SK_PNMI_RO, General, 0},
+	{OID_SKGE_TX_SW_QUEUE_MAX,
+		1,
+		0,
+		SK_PNMI_MAI_OFF(TxSwQueueMax),
+		SK_PNMI_RO, General, 0},
+	{OID_SKGE_TX_RETRY,
+		1,
+		0,
+		SK_PNMI_MAI_OFF(TxRetryCts),
+		SK_PNMI_RO, General, 0},
+	{OID_SKGE_RX_INTR_CTS,
+		1,
+		0,
+		SK_PNMI_MAI_OFF(RxIntrCts),
+		SK_PNMI_RO, General, 0},
+	{OID_SKGE_TX_INTR_CTS,
+		1,
+		0,
+		SK_PNMI_MAI_OFF(TxIntrCts),
+		SK_PNMI_RO, General, 0},
+	{OID_SKGE_RX_NO_BUF_CTS,
+		1,
+		0,
+		SK_PNMI_MAI_OFF(RxNoBufCts),
+		SK_PNMI_RO, General, 0},
+	{OID_SKGE_TX_NO_BUF_CTS,
+		1,
+		0,
+		SK_PNMI_MAI_OFF(TxNoBufCts),
+		SK_PNMI_RO, General, 0},
+	{OID_SKGE_TX_USED_DESCR_NO,
+		1,
+		0,
+		SK_PNMI_MAI_OFF(TxUsedDescrNo),
+		SK_PNMI_RO, General, 0},
+	{OID_SKGE_RX_DELIVERED_CTS,
+		1,
+		0,
+		SK_PNMI_MAI_OFF(RxDeliveredCts),
+		SK_PNMI_RO, General, 0},
+	{OID_SKGE_RX_OCTETS_DELIV_CTS,
+		1,
+		0,
+		SK_PNMI_MAI_OFF(RxOctetsDeliveredCts),
+		SK_PNMI_RO, General, 0},
+	{OID_SKGE_RX_HW_ERROR_CTS,
+		1,
+		0,
+		SK_PNMI_MAI_OFF(RxHwErrorsCts),
+		SK_PNMI_RO, General, 0},
+	{OID_SKGE_TX_HW_ERROR_CTS,
+		1,
+		0,
+		SK_PNMI_MAI_OFF(TxHwErrorsCts),
+		SK_PNMI_RO, General, 0},
+	{OID_SKGE_IN_ERRORS_CTS,
+		1,
+		0,
+		SK_PNMI_MAI_OFF(InErrorsCts),
+		SK_PNMI_RO, General, 0},
+	{OID_SKGE_OUT_ERROR_CTS,
+		1,
+		0,
+		SK_PNMI_MAI_OFF(OutErrorsCts),
+		SK_PNMI_RO, General, 0},
+	{OID_SKGE_ERR_RECOVERY_CTS,
+		1,
+		0,
+		SK_PNMI_MAI_OFF(ErrRecoveryCts),
+		SK_PNMI_RO, General, 0},
+	{OID_SKGE_SYSUPTIME,
+		1,
+		0,
+		SK_PNMI_MAI_OFF(SysUpTime),
+		SK_PNMI_RO, General, 0},
+	{OID_SKGE_SENSOR_NUMBER,
+		1,
+		0,
+		SK_PNMI_MAI_OFF(SensorNumber),
+		SK_PNMI_RO, General, 0},
+	{OID_SKGE_SENSOR_INDEX,
+		SK_PNMI_SENSOR_ENTRIES,
+		sizeof(SK_PNMI_SENSOR),
+		SK_PNMI_OFF(Sensor) + SK_PNMI_SEN_OFF(SensorIndex),
+		SK_PNMI_RO, SensorStat, 0},
+	{OID_SKGE_SENSOR_DESCR,
+		SK_PNMI_SENSOR_ENTRIES,
+		sizeof(SK_PNMI_SENSOR),
+		SK_PNMI_OFF(Sensor) + SK_PNMI_SEN_OFF(SensorDescr),
+		SK_PNMI_RO, SensorStat, 0},
+	{OID_SKGE_SENSOR_TYPE,
+		SK_PNMI_SENSOR_ENTRIES,
+		sizeof(SK_PNMI_SENSOR),
+		SK_PNMI_OFF(Sensor) + SK_PNMI_SEN_OFF(SensorType),
+		SK_PNMI_RO, SensorStat, 0},
+	{OID_SKGE_SENSOR_VALUE,
+		SK_PNMI_SENSOR_ENTRIES,
+		sizeof(SK_PNMI_SENSOR),
+		SK_PNMI_OFF(Sensor) + SK_PNMI_SEN_OFF(SensorValue),
+		SK_PNMI_RO, SensorStat, 0},
+	{OID_SKGE_SENSOR_WAR_THRES_LOW,
+		SK_PNMI_SENSOR_ENTRIES,
+		sizeof(SK_PNMI_SENSOR),
+		SK_PNMI_OFF(Sensor) + SK_PNMI_SEN_OFF(SensorWarningThresholdLow),
+		SK_PNMI_RO, SensorStat, 0},
+	{OID_SKGE_SENSOR_WAR_THRES_UPP,
+		SK_PNMI_SENSOR_ENTRIES,
+		sizeof(SK_PNMI_SENSOR),
+		SK_PNMI_OFF(Sensor) + SK_PNMI_SEN_OFF(SensorWarningThresholdHigh),
+		SK_PNMI_RO, SensorStat, 0},
+	{OID_SKGE_SENSOR_ERR_THRES_LOW,
+		SK_PNMI_SENSOR_ENTRIES,
+		sizeof(SK_PNMI_SENSOR),
+		SK_PNMI_OFF(Sensor) + SK_PNMI_SEN_OFF(SensorErrorThresholdLow),
+		SK_PNMI_RO, SensorStat, 0},
+	{OID_SKGE_SENSOR_ERR_THRES_UPP,
+		SK_PNMI_SENSOR_ENTRIES,
+		sizeof(SK_PNMI_SENSOR),
+		SK_PNMI_OFF(Sensor) + SK_PNMI_SEN_OFF(SensorErrorThresholdHigh),
+		SK_PNMI_RO, SensorStat, 0},
+	{OID_SKGE_SENSOR_STATUS,
+		SK_PNMI_SENSOR_ENTRIES,
+		sizeof(SK_PNMI_SENSOR),
+		SK_PNMI_OFF(Sensor) + SK_PNMI_SEN_OFF(SensorStatus),
+		SK_PNMI_RO, SensorStat, 0},
+	{OID_SKGE_SENSOR_WAR_CTS,
+		SK_PNMI_SENSOR_ENTRIES,
+		sizeof(SK_PNMI_SENSOR),
+		SK_PNMI_OFF(Sensor) + SK_PNMI_SEN_OFF(SensorWarningCts),
+		SK_PNMI_RO, SensorStat, 0},
+	{OID_SKGE_SENSOR_ERR_CTS,
+		SK_PNMI_SENSOR_ENTRIES,
+		sizeof(SK_PNMI_SENSOR),
+		SK_PNMI_OFF(Sensor) + SK_PNMI_SEN_OFF(SensorErrorCts),
+		SK_PNMI_RO, SensorStat, 0},
+	{OID_SKGE_SENSOR_WAR_TIME,
+		SK_PNMI_SENSOR_ENTRIES,
+		sizeof(SK_PNMI_SENSOR),
+		SK_PNMI_OFF(Sensor) + SK_PNMI_SEN_OFF(SensorWarningTimestamp),
+		SK_PNMI_RO, SensorStat, 0},
+	{OID_SKGE_SENSOR_ERR_TIME,
+		SK_PNMI_SENSOR_ENTRIES,
+		sizeof(SK_PNMI_SENSOR),
+		SK_PNMI_OFF(Sensor) + SK_PNMI_SEN_OFF(SensorErrorTimestamp),
+		SK_PNMI_RO, SensorStat, 0},
+	{OID_SKGE_CHKSM_NUMBER,
+		1,
+		0,
+		SK_PNMI_MAI_OFF(ChecksumNumber),
+		SK_PNMI_RO, General, 0},
+	{OID_SKGE_CHKSM_RX_OK_CTS,
+		SKCS_NUM_PROTOCOLS,
+		sizeof(SK_PNMI_CHECKSUM),
+		SK_PNMI_OFF(Checksum) + SK_PNMI_CHK_OFF(ChecksumRxOkCts),
+		SK_PNMI_RO, CsumStat, 0},
+	{OID_SKGE_CHKSM_RX_UNABLE_CTS,
+		SKCS_NUM_PROTOCOLS,
+		sizeof(SK_PNMI_CHECKSUM),
+		SK_PNMI_OFF(Checksum) + SK_PNMI_CHK_OFF(ChecksumRxUnableCts),
+		SK_PNMI_RO, CsumStat, 0},
+	{OID_SKGE_CHKSM_RX_ERR_CTS,
+		SKCS_NUM_PROTOCOLS,
+		sizeof(SK_PNMI_CHECKSUM),
+		SK_PNMI_OFF(Checksum) + SK_PNMI_CHK_OFF(ChecksumRxErrCts),
+		SK_PNMI_RO, CsumStat, 0},
+	{OID_SKGE_CHKSM_TX_OK_CTS,
+		SKCS_NUM_PROTOCOLS,
+		sizeof(SK_PNMI_CHECKSUM),
+		SK_PNMI_OFF(Checksum) + SK_PNMI_CHK_OFF(ChecksumTxOkCts),
+		SK_PNMI_RO, CsumStat, 0},
+	{OID_SKGE_CHKSM_TX_UNABLE_CTS,
+		SKCS_NUM_PROTOCOLS,
+		sizeof(SK_PNMI_CHECKSUM),
+		SK_PNMI_OFF(Checksum) + SK_PNMI_CHK_OFF(ChecksumTxUnableCts),
+		SK_PNMI_RO, CsumStat, 0},
+	{OID_SKGE_STAT_TX,
+		SK_PNMI_MAC_ENTRIES,
+		sizeof(SK_PNMI_STAT),
+		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxOkCts),
+		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX},
+	{OID_SKGE_STAT_TX_OCTETS,
+		SK_PNMI_MAC_ENTRIES,
+		sizeof(SK_PNMI_STAT),
+		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxOctetsOkCts),
+		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_OCTET},
+	{OID_SKGE_STAT_TX_BROADCAST,
+		SK_PNMI_MAC_ENTRIES,
+		sizeof(SK_PNMI_STAT),
+		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxBroadcastOkCts),
+		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_BROADCAST},
+	{OID_SKGE_STAT_TX_MULTICAST,
+		SK_PNMI_MAC_ENTRIES,
+		sizeof(SK_PNMI_STAT),
+		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxMulticastOkCts),
+		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_MULTICAST},
+	{OID_SKGE_STAT_TX_UNICAST,
+		SK_PNMI_MAC_ENTRIES,
+		sizeof(SK_PNMI_STAT),
+		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxUnicastOkCts),
+		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_UNICAST},
+	{OID_SKGE_STAT_TX_LONGFRAMES,
+		SK_PNMI_MAC_ENTRIES,
+		sizeof(SK_PNMI_STAT),
+		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxLongFramesCts),
+		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_LONGFRAMES},
+	{OID_SKGE_STAT_TX_BURST,
+		SK_PNMI_MAC_ENTRIES,
+		sizeof(SK_PNMI_STAT),
+		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxBurstCts),
+		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_BURST},
+	{OID_SKGE_STAT_TX_PFLOWC,
+		SK_PNMI_MAC_ENTRIES,
+		sizeof(SK_PNMI_STAT),
+		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxPauseMacCtrlCts),
+		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_PMACC},
+	{OID_SKGE_STAT_TX_FLOWC,
+		SK_PNMI_MAC_ENTRIES,
+		sizeof(SK_PNMI_STAT),
+		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxMacCtrlCts),
+		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_MACC},
+	{OID_SKGE_STAT_TX_SINGLE_COL,
+		SK_PNMI_MAC_ENTRIES,
+		sizeof(SK_PNMI_STAT),
+		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxSingleCollisionCts),
+		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_SINGLE_COL},
+	{OID_SKGE_STAT_TX_MULTI_COL,
+		SK_PNMI_MAC_ENTRIES,
+		sizeof(SK_PNMI_STAT),
+		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxMultipleCollisionCts),
+		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_MULTI_COL},
+	{OID_SKGE_STAT_TX_EXCESS_COL,
+		SK_PNMI_MAC_ENTRIES,
+		sizeof(SK_PNMI_STAT),
+		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxExcessiveCollisionCts),
+		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_EXCESS_COL},
+	{OID_SKGE_STAT_TX_LATE_COL,
+		SK_PNMI_MAC_ENTRIES,
+		sizeof(SK_PNMI_STAT),
+		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxLateCollisionCts),
+		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_LATE_COL},
+	{OID_SKGE_STAT_TX_DEFFERAL,
+		SK_PNMI_MAC_ENTRIES,
+		sizeof(SK_PNMI_STAT),
+		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxDeferralCts),
+		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_DEFFERAL},
+	{OID_SKGE_STAT_TX_EXCESS_DEF,
+		SK_PNMI_MAC_ENTRIES,
+		sizeof(SK_PNMI_STAT),
+		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxExcessiveDeferralCts),
+		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_EXCESS_DEF},
+	{OID_SKGE_STAT_TX_UNDERRUN,
+		SK_PNMI_MAC_ENTRIES,
+		sizeof(SK_PNMI_STAT),
+		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxFifoUnderrunCts),
+		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_UNDERRUN},
+	{OID_SKGE_STAT_TX_CARRIER,
+		SK_PNMI_MAC_ENTRIES,
+		sizeof(SK_PNMI_STAT),
+		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxCarrierCts),
+		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_CARRIER},
+/*	{OID_SKGE_STAT_TX_UTIL,
+		SK_PNMI_MAC_ENTRIES,
+		sizeof(SK_PNMI_STAT),
+		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxUtilization),
+		SK_PNMI_RO, MacPrivateStat, (SK_U16)(-1)}, */
+	{OID_SKGE_STAT_TX_64,
+		SK_PNMI_MAC_ENTRIES,
+		sizeof(SK_PNMI_STAT),
+		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTx64Cts),
+		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_64},
+	{OID_SKGE_STAT_TX_127,
+		SK_PNMI_MAC_ENTRIES,
+		sizeof(SK_PNMI_STAT),
+		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTx127Cts),
+		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_127},
+	{OID_SKGE_STAT_TX_255,
+		SK_PNMI_MAC_ENTRIES,
+		sizeof(SK_PNMI_STAT),
+		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTx255Cts),
+		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_255},
+	{OID_SKGE_STAT_TX_511,
+		SK_PNMI_MAC_ENTRIES,
+		sizeof(SK_PNMI_STAT),
+		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTx511Cts),
+		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_511},
+	{OID_SKGE_STAT_TX_1023,
+		SK_PNMI_MAC_ENTRIES,
+		sizeof(SK_PNMI_STAT),
+		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTx1023Cts),
+		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_1023},
+	{OID_SKGE_STAT_TX_MAX,
+		SK_PNMI_MAC_ENTRIES,
+		sizeof(SK_PNMI_STAT),
+		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxMaxCts),
+		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_MAX},
+	{OID_SKGE_STAT_TX_SYNC,
+		SK_PNMI_MAC_ENTRIES,
+		sizeof(SK_PNMI_STAT),
+		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxSyncCts),
+		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_SYNC},
+	{OID_SKGE_STAT_TX_SYNC_OCTETS,
+		SK_PNMI_MAC_ENTRIES,
+		sizeof(SK_PNMI_STAT),
+		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxSyncOctetsCts),
+		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_SYNC_OCTET},
+	{OID_SKGE_STAT_RX,
+		SK_PNMI_MAC_ENTRIES,
+		sizeof(SK_PNMI_STAT),
+		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxOkCts),
+		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX},
+	{OID_SKGE_STAT_RX_OCTETS,
+		SK_PNMI_MAC_ENTRIES,
+		sizeof(SK_PNMI_STAT),
+		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxOctetsOkCts),
+		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_OCTET},
+	{OID_SKGE_STAT_RX_BROADCAST,
+		SK_PNMI_MAC_ENTRIES,
+		sizeof(SK_PNMI_STAT),
+		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxBroadcastOkCts),
+		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_BROADCAST},
+	{OID_SKGE_STAT_RX_MULTICAST,
+		SK_PNMI_MAC_ENTRIES,
+		sizeof(SK_PNMI_STAT),
+		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxMulticastOkCts),
+		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_MULTICAST},
+	{OID_SKGE_STAT_RX_UNICAST,
+		SK_PNMI_MAC_ENTRIES,
+		sizeof(SK_PNMI_STAT),
+		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxUnicastOkCts),
+		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_UNICAST},
+	{OID_SKGE_STAT_RX_LONGFRAMES,
+		SK_PNMI_MAC_ENTRIES,
+		sizeof(SK_PNMI_STAT),
+		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxLongFramesCts),
+		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_LONGFRAMES},
+	{OID_SKGE_STAT_RX_PFLOWC,
+		SK_PNMI_MAC_ENTRIES,
+		sizeof(SK_PNMI_STAT),
+		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxPauseMacCtrlCts),
+		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_PMACC},
+	{OID_SKGE_STAT_RX_FLOWC,
+		SK_PNMI_MAC_ENTRIES,
+		sizeof(SK_PNMI_STAT),
+		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxMacCtrlCts),
+		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_MACC},
+	{OID_SKGE_STAT_RX_PFLOWC_ERR,
+		SK_PNMI_MAC_ENTRIES,
+		sizeof(SK_PNMI_STAT),
+		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxPauseMacCtrlErrorCts),
+		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_PMACC_ERR},
+	{OID_SKGE_STAT_RX_FLOWC_UNKWN,
+		SK_PNMI_MAC_ENTRIES,
+		sizeof(SK_PNMI_STAT),
+		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxMacCtrlUnknownCts),
+		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_MACC_UNKWN},
+	{OID_SKGE_STAT_RX_BURST,
+		SK_PNMI_MAC_ENTRIES,
+		sizeof(SK_PNMI_STAT),
+		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxBurstCts),
+		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_BURST},
+	{OID_SKGE_STAT_RX_MISSED,
+		SK_PNMI_MAC_ENTRIES,
+		sizeof(SK_PNMI_STAT),
+		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxMissedCts),
+		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_MISSED},
+	{OID_SKGE_STAT_RX_FRAMING,
+		SK_PNMI_MAC_ENTRIES,
+		sizeof(SK_PNMI_STAT),
+		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxFramingCts),
+		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_FRAMING},
+	{OID_SKGE_STAT_RX_OVERFLOW,
+		SK_PNMI_MAC_ENTRIES,
+		sizeof(SK_PNMI_STAT),
+		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxFifoOverflowCts),
+		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_OVERFLOW},
+	{OID_SKGE_STAT_RX_JABBER,
+		SK_PNMI_MAC_ENTRIES,
+		sizeof(SK_PNMI_STAT),
+		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxJabberCts),
+		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_JABBER},
+	{OID_SKGE_STAT_RX_CARRIER,
+		SK_PNMI_MAC_ENTRIES,
+		sizeof(SK_PNMI_STAT),
+		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxCarrierCts),
+		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_CARRIER},
+	{OID_SKGE_STAT_RX_IR_LENGTH,
+		SK_PNMI_MAC_ENTRIES,
+		sizeof(SK_PNMI_STAT),
+		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxIRLengthCts),
+		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_IRLENGTH},
+	{OID_SKGE_STAT_RX_SYMBOL,
+		SK_PNMI_MAC_ENTRIES,
+		sizeof(SK_PNMI_STAT),
+		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxSymbolCts),
+		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_SYMBOL},
+	{OID_SKGE_STAT_RX_SHORTS,
+		SK_PNMI_MAC_ENTRIES,
+		sizeof(SK_PNMI_STAT),
+		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxShortsCts),
+		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_SHORTS},
+	{OID_SKGE_STAT_RX_RUNT,
+		SK_PNMI_MAC_ENTRIES,
+		sizeof(SK_PNMI_STAT),
+		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxRuntCts),
+		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_RUNT},
+	{OID_SKGE_STAT_RX_CEXT,
+		SK_PNMI_MAC_ENTRIES,
+		sizeof(SK_PNMI_STAT),
+		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxCextCts),
+		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_CEXT},
+	{OID_SKGE_STAT_RX_TOO_LONG,
+		SK_PNMI_MAC_ENTRIES,
+		sizeof(SK_PNMI_STAT),
+		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxTooLongCts),
+		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_TOO_LONG},
+	{OID_SKGE_STAT_RX_FCS,
+		SK_PNMI_MAC_ENTRIES,
+		sizeof(SK_PNMI_STAT),
+		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxFcsCts),
+		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_FCS},
+/*	{OID_SKGE_STAT_RX_UTIL,
+		SK_PNMI_MAC_ENTRIES,
+		sizeof(SK_PNMI_STAT),
+		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxUtilization),
+		SK_PNMI_RO, MacPrivateStat, (SK_U16)(-1)}, */
+	{OID_SKGE_STAT_RX_64,
+		SK_PNMI_MAC_ENTRIES,
+		sizeof(SK_PNMI_STAT),
+		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRx64Cts),
+		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_64},
+	{OID_SKGE_STAT_RX_127,
+		SK_PNMI_MAC_ENTRIES,
+		sizeof(SK_PNMI_STAT),
+		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRx127Cts),
+		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_127},
+	{OID_SKGE_STAT_RX_255,
+		SK_PNMI_MAC_ENTRIES,
+		sizeof(SK_PNMI_STAT),
+		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRx255Cts),
+		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_255},
+	{OID_SKGE_STAT_RX_511,
+		SK_PNMI_MAC_ENTRIES,
+		sizeof(SK_PNMI_STAT),
+		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRx511Cts),
+		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_511},
+	{OID_SKGE_STAT_RX_1023,
+		SK_PNMI_MAC_ENTRIES,
+		sizeof(SK_PNMI_STAT),
+		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRx1023Cts),
+		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_1023},
+	{OID_SKGE_STAT_RX_MAX,
+		SK_PNMI_MAC_ENTRIES,
+		sizeof(SK_PNMI_STAT),
+		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxMaxCts),
+		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_MAX},
+	{OID_SKGE_PHYS_CUR_ADDR,
+		SK_PNMI_MAC_ENTRIES,
+		sizeof(SK_PNMI_CONF),
+		SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfMacCurrentAddr),
+		SK_PNMI_RW, Addr, 0},
+	{OID_SKGE_PHYS_FAC_ADDR,
+		SK_PNMI_MAC_ENTRIES,
+		sizeof(SK_PNMI_CONF),
+		SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfMacFactoryAddr),
+		SK_PNMI_RO, Addr, 0},
+	{OID_SKGE_PMD,
+		SK_PNMI_MAC_ENTRIES,
+		sizeof(SK_PNMI_CONF),
+		SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfPMD),
+		SK_PNMI_RO, MacPrivateConf, 0},
+	{OID_SKGE_CONNECTOR,
+		SK_PNMI_MAC_ENTRIES,
+		sizeof(SK_PNMI_CONF),
+		SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfConnector),
+		SK_PNMI_RO, MacPrivateConf, 0},
+	{OID_SKGE_PHY_TYPE,
+		SK_PNMI_MAC_ENTRIES,
+		sizeof(SK_PNMI_CONF),
+		SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfPhyType),
+		SK_PNMI_RO, MacPrivateConf, 0},
+	{OID_SKGE_LINK_CAP,
+		SK_PNMI_MAC_ENTRIES,
+		sizeof(SK_PNMI_CONF),
+		SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfLinkCapability),
+		SK_PNMI_RO, MacPrivateConf, 0},
+	{OID_SKGE_LINK_MODE,
+		SK_PNMI_MAC_ENTRIES,
+		sizeof(SK_PNMI_CONF),
+		SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfLinkMode),
+		SK_PNMI_RW, MacPrivateConf, 0},
+	{OID_SKGE_LINK_MODE_STATUS,
+		SK_PNMI_MAC_ENTRIES,
+		sizeof(SK_PNMI_CONF),
+		SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfLinkModeStatus),
+		SK_PNMI_RO, MacPrivateConf, 0},
+	{OID_SKGE_LINK_STATUS,
+		SK_PNMI_MAC_ENTRIES,
+		sizeof(SK_PNMI_CONF),
+		SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfLinkStatus),
+		SK_PNMI_RO, MacPrivateConf, 0},
+	{OID_SKGE_FLOWCTRL_CAP,
+		SK_PNMI_MAC_ENTRIES,
+		sizeof(SK_PNMI_CONF),
+		SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfFlowCtrlCapability),
+		SK_PNMI_RO, MacPrivateConf, 0},
+	{OID_SKGE_FLOWCTRL_MODE,
+		SK_PNMI_MAC_ENTRIES,
+		sizeof(SK_PNMI_CONF),
+		SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfFlowCtrlMode),
+		SK_PNMI_RW, MacPrivateConf, 0},
+	{OID_SKGE_FLOWCTRL_STATUS,
+		SK_PNMI_MAC_ENTRIES,
+		sizeof(SK_PNMI_CONF),
+		SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfFlowCtrlStatus),
+		SK_PNMI_RO, MacPrivateConf, 0},
+	{OID_SKGE_PHY_OPERATION_CAP,
+		SK_PNMI_MAC_ENTRIES,
+		sizeof(SK_PNMI_CONF),
+		SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfPhyOperationCapability),
+		SK_PNMI_RO, MacPrivateConf, 0},
+	{OID_SKGE_PHY_OPERATION_MODE,
+		SK_PNMI_MAC_ENTRIES,
+		sizeof(SK_PNMI_CONF),
+		SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfPhyOperationMode),
+		SK_PNMI_RW, MacPrivateConf, 0},
+	{OID_SKGE_PHY_OPERATION_STATUS,
+		SK_PNMI_MAC_ENTRIES,
+		sizeof(SK_PNMI_CONF),
+		SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfPhyOperationStatus),
+		SK_PNMI_RO, MacPrivateConf, 0},
+	{OID_SKGE_SPEED_CAP,
+		SK_PNMI_MAC_ENTRIES,
+		sizeof(SK_PNMI_CONF),
+		SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfSpeedCapability),
+		SK_PNMI_RO, MacPrivateConf, 0},
+	{OID_SKGE_SPEED_MODE,
+		SK_PNMI_MAC_ENTRIES,
+		sizeof(SK_PNMI_CONF),
+		SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfSpeedMode),
+		SK_PNMI_RW, MacPrivateConf, 0},
+	{OID_SKGE_SPEED_STATUS,
+		SK_PNMI_MAC_ENTRIES,
+		sizeof(SK_PNMI_CONF),
+		SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfSpeedStatus),
+		SK_PNMI_RO, MacPrivateConf, 0},
+	{OID_SKGE_TRAP,
+		1,
+		0,
+		SK_PNMI_MAI_OFF(Trap),
+		SK_PNMI_RO, General, 0},
+	{OID_SKGE_TRAP_NUMBER,
+		1,
+		0,
+		SK_PNMI_MAI_OFF(TrapNumber),
+		SK_PNMI_RO, General, 0},
+	{OID_SKGE_RLMT_MODE,
+		1,
+		0,
+		SK_PNMI_MAI_OFF(RlmtMode),
+		SK_PNMI_RW, Rlmt, 0},
+	{OID_SKGE_RLMT_PORT_NUMBER,
+		1,
+		0,
+		SK_PNMI_MAI_OFF(RlmtPortNumber),
+		SK_PNMI_RO, Rlmt, 0},
+	{OID_SKGE_RLMT_PORT_ACTIVE,
+		1,
+		0,
+		SK_PNMI_MAI_OFF(RlmtPortActive),
+		SK_PNMI_RO, Rlmt, 0},
+	{OID_SKGE_RLMT_PORT_PREFERRED,
+		1,
+		0,
+		SK_PNMI_MAI_OFF(RlmtPortPreferred),
+		SK_PNMI_RW, Rlmt, 0},
+	{OID_SKGE_RLMT_CHANGE_CTS,
+		1,
+		0,
+		SK_PNMI_MAI_OFF(RlmtChangeCts),
+		SK_PNMI_RO, Rlmt, 0},
+	{OID_SKGE_RLMT_CHANGE_TIME,
+		1,
+		0,
+		SK_PNMI_MAI_OFF(RlmtChangeTime),
+		SK_PNMI_RO, Rlmt, 0},
+	{OID_SKGE_RLMT_CHANGE_ESTIM,
+		1,
+		0,
+		SK_PNMI_MAI_OFF(RlmtChangeEstimate),
+		SK_PNMI_RO, Rlmt, 0},
+	{OID_SKGE_RLMT_CHANGE_THRES,
+		1,
+		0,
+		SK_PNMI_MAI_OFF(RlmtChangeThreshold),
+		SK_PNMI_RW, Rlmt, 0},
+	{OID_SKGE_RLMT_PORT_INDEX,
+		SK_PNMI_MAC_ENTRIES,
+		sizeof(SK_PNMI_RLMT),
+		SK_PNMI_OFF(Rlmt) + SK_PNMI_RLM_OFF(RlmtIndex),
+		SK_PNMI_RO, RlmtStat, 0},
+	{OID_SKGE_RLMT_STATUS,
+		SK_PNMI_MAC_ENTRIES,
+		sizeof(SK_PNMI_RLMT),
+		SK_PNMI_OFF(Rlmt) + SK_PNMI_RLM_OFF(RlmtStatus),
+		SK_PNMI_RO, RlmtStat, 0},
+	{OID_SKGE_RLMT_TX_HELLO_CTS,
+		SK_PNMI_MAC_ENTRIES,
+		sizeof(SK_PNMI_RLMT),
+		SK_PNMI_OFF(Rlmt) + SK_PNMI_RLM_OFF(RlmtTxHelloCts),
+		SK_PNMI_RO, RlmtStat, 0},
+	{OID_SKGE_RLMT_RX_HELLO_CTS,
+		SK_PNMI_MAC_ENTRIES,
+		sizeof(SK_PNMI_RLMT),
+		SK_PNMI_OFF(Rlmt) + SK_PNMI_RLM_OFF(RlmtRxHelloCts),
+		SK_PNMI_RO, RlmtStat, 0},
+	{OID_SKGE_RLMT_TX_SP_REQ_CTS,
+		SK_PNMI_MAC_ENTRIES,
+		sizeof(SK_PNMI_RLMT),
+		SK_PNMI_OFF(Rlmt) + SK_PNMI_RLM_OFF(RlmtTxSpHelloReqCts),
+		SK_PNMI_RO, RlmtStat, 0},
+	{OID_SKGE_RLMT_RX_SP_CTS,
+		SK_PNMI_MAC_ENTRIES,
+		sizeof(SK_PNMI_RLMT),
+		SK_PNMI_OFF(Rlmt) + SK_PNMI_RLM_OFF(RlmtRxSpHelloCts),
+		SK_PNMI_RO, RlmtStat, 0},
+	{OID_SKGE_RLMT_MONITOR_NUMBER,
+		1,
+		0,
+		SK_PNMI_MAI_OFF(RlmtMonitorNumber),
+		SK_PNMI_RO, General, 0},
+	{OID_SKGE_RLMT_MONITOR_INDEX,
+		SK_PNMI_MONITOR_ENTRIES,
+		sizeof(SK_PNMI_RLMT_MONITOR),
+		SK_PNMI_OFF(RlmtMonitor) + SK_PNMI_MON_OFF(RlmtMonitorIndex),
+		SK_PNMI_RO, Monitor, 0},
+	{OID_SKGE_RLMT_MONITOR_ADDR,
+		SK_PNMI_MONITOR_ENTRIES,
+		sizeof(SK_PNMI_RLMT_MONITOR),
+		SK_PNMI_OFF(RlmtMonitor) + SK_PNMI_MON_OFF(RlmtMonitorAddr),
+		SK_PNMI_RO, Monitor, 0},
+	{OID_SKGE_RLMT_MONITOR_ERRS,
+		SK_PNMI_MONITOR_ENTRIES,
+		sizeof(SK_PNMI_RLMT_MONITOR),
+		SK_PNMI_OFF(RlmtMonitor) + SK_PNMI_MON_OFF(RlmtMonitorErrorCts),
+		SK_PNMI_RO, Monitor, 0},
+	{OID_SKGE_RLMT_MONITOR_TIMESTAMP,
+		SK_PNMI_MONITOR_ENTRIES,
+		sizeof(SK_PNMI_RLMT_MONITOR),
+		SK_PNMI_OFF(RlmtMonitor) + SK_PNMI_MON_OFF(RlmtMonitorTimestamp),
+		SK_PNMI_RO, Monitor, 0},
+	{OID_SKGE_RLMT_MONITOR_ADMIN,
+		SK_PNMI_MONITOR_ENTRIES,
+		sizeof(SK_PNMI_RLMT_MONITOR),
+		SK_PNMI_OFF(RlmtMonitor) + SK_PNMI_MON_OFF(RlmtMonitorAdmin),
+		SK_PNMI_RW, Monitor, 0},
+	{OID_SKGE_MTU,
+		1,
+		0,
+		SK_PNMI_MAI_OFF(MtuSize),
+		SK_PNMI_RW, MacPrivateConf, 0},
+	{OID_SKGE_VCT_GET,
+		0,
+		0,
+		0,
+		SK_PNMI_RO, Vct, 0},
+	{OID_SKGE_VCT_SET,
+		0,
+		0,
+		0,
+		SK_PNMI_WO, Vct, 0},
+	{OID_SKGE_VCT_STATUS,
+		0,
+		0,
+		0,
+		SK_PNMI_RO, Vct, 0},
+	{OID_SKGE_BOARDLEVEL,
+		0,
+		0,
+		0,
+		SK_PNMI_RO, General, 0},
+};
+
diff --git a/drivers/net/sk98lin/skgepnmi.c b/drivers/net/sk98lin/skgepnmi.c
new file mode 100644
index 0000000..b36dd9a
--- /dev/null
+++ b/drivers/net/sk98lin/skgepnmi.c
@@ -0,0 +1,8210 @@
+/*****************************************************************************
+ *
+ * Name:	skgepnmi.c
+ * Project:	GEnesis, PCI Gigabit Ethernet Adapter
+ * Version:	$Revision: 1.111 $
+ * Date:	$Date: 2003/09/15 13:35:35 $
+ * Purpose:	Private Network Management Interface
+ *
+ ****************************************************************************/
+
+/******************************************************************************
+ *
+ *	(C)Copyright 1998-2002 SysKonnect GmbH.
+ *	(C)Copyright 2002-2003 Marvell.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+
+#ifndef _lint
+static const char SysKonnectFileId[] =
+	"@(#) $Id: skgepnmi.c,v 1.111 2003/09/15 13:35:35 tschilli Exp $ (C) Marvell.";
+#endif /* !_lint */
+
+#include "h/skdrv1st.h"
+#include "h/sktypes.h"
+#include "h/xmac_ii.h"
+#include "h/skdebug.h"
+#include "h/skqueue.h"
+#include "h/skgepnmi.h"
+#include "h/skgesirq.h"
+#include "h/skcsum.h"
+#include "h/skvpd.h"
+#include "h/skgehw.h"
+#include "h/skgeinit.h"
+#include "h/skdrv2nd.h"
+#include "h/skgepnm2.h"
+#ifdef SK_POWER_MGMT
+#include "h/skgepmgt.h"
+#endif
+/* defines *******************************************************************/
+
+#ifndef DEBUG
+#define PNMI_STATIC	static
+#else	/* DEBUG */
+#define PNMI_STATIC
+#endif /* DEBUG */
+
+/*
+ * Public Function prototypes
+ */
+int SkPnmiInit(SK_AC *pAC, SK_IOC IoC, int level);
+int SkPnmiSetVar(SK_AC *pAC, SK_IOC IoC, SK_U32 Id, void *pBuf,
+	unsigned int *pLen, SK_U32 Instance, SK_U32 NetIndex);
+int SkPnmiGetStruct(SK_AC *pAC, SK_IOC IoC, void *pBuf,
+	unsigned int *pLen, SK_U32 NetIndex);
+int SkPnmiPreSetStruct(SK_AC *pAC, SK_IOC IoC, void *pBuf,
+	unsigned int *pLen, SK_U32 NetIndex);
+int SkPnmiSetStruct(SK_AC *pAC, SK_IOC IoC, void *pBuf,
+	unsigned int *pLen, SK_U32 NetIndex);
+int SkPnmiEvent(SK_AC *pAC, SK_IOC IoC, SK_U32 Event, SK_EVPARA Param);
+int SkPnmiGenIoctl(SK_AC *pAC, SK_IOC IoC, void * pBuf,
+	unsigned int * pLen, SK_U32 NetIndex);
+
+
+/*
+ * Private Function prototypes
+ */
+
+PNMI_STATIC SK_U8 CalculateLinkModeStatus(SK_AC *pAC, SK_IOC IoC, unsigned int
+	PhysPortIndex);
+PNMI_STATIC SK_U8 CalculateLinkStatus(SK_AC *pAC, SK_IOC IoC, unsigned int
+	PhysPortIndex);
+PNMI_STATIC void CopyMac(char *pDst, SK_MAC_ADDR *pMac);
+PNMI_STATIC void CopyTrapQueue(SK_AC *pAC, char *pDstBuf);
+PNMI_STATIC SK_U64 GetPhysStatVal(SK_AC *pAC, SK_IOC IoC,
+	unsigned int PhysPortIndex, unsigned int StatIndex);
+PNMI_STATIC SK_U64 GetStatVal(SK_AC *pAC, SK_IOC IoC, unsigned int LogPortIndex,
+	unsigned int StatIndex, SK_U32 NetIndex);
+PNMI_STATIC char* GetTrapEntry(SK_AC *pAC, SK_U32 TrapId, unsigned int Size);
+PNMI_STATIC void GetTrapQueueLen(SK_AC *pAC, unsigned int *pLen,
+	unsigned int *pEntries);
+PNMI_STATIC int GetVpdKeyArr(SK_AC *pAC, SK_IOC IoC, char *pKeyArr,
+	unsigned int KeyArrLen, unsigned int *pKeyNo);
+PNMI_STATIC int LookupId(SK_U32 Id);
+PNMI_STATIC int MacUpdate(SK_AC *pAC, SK_IOC IoC, unsigned int FirstMac,
+	unsigned int LastMac);
+PNMI_STATIC int PnmiStruct(SK_AC *pAC, SK_IOC IoC, int Action, char *pBuf,
+	unsigned int *pLen, SK_U32 NetIndex);
+PNMI_STATIC int PnmiVar(SK_AC *pAC, SK_IOC IoC, int Action, SK_U32 Id,
+	char *pBuf, unsigned int *pLen, SK_U32 Instance, SK_U32 NetIndex);
+PNMI_STATIC void QueueRlmtNewMacTrap(SK_AC *pAC, unsigned int ActiveMac);
+PNMI_STATIC void QueueRlmtPortTrap(SK_AC *pAC, SK_U32 TrapId,
+	unsigned int PortIndex);
+PNMI_STATIC void QueueSensorTrap(SK_AC *pAC, SK_U32 TrapId,
+	unsigned int SensorIndex);
+PNMI_STATIC void QueueSimpleTrap(SK_AC *pAC, SK_U32 TrapId);
+PNMI_STATIC void ResetCounter(SK_AC *pAC, SK_IOC IoC, SK_U32 NetIndex);
+PNMI_STATIC int RlmtUpdate(SK_AC *pAC, SK_IOC IoC, SK_U32 NetIndex);
+PNMI_STATIC int SirqUpdate(SK_AC *pAC, SK_IOC IoC);
+PNMI_STATIC void VirtualConf(SK_AC *pAC, SK_IOC IoC, SK_U32 Id, char *pBuf);
+PNMI_STATIC int Vct(SK_AC *pAC, SK_IOC IoC, int Action, SK_U32 Id, char *pBuf,
+	unsigned int *pLen, SK_U32 Instance, unsigned int TableIndex, SK_U32 NetIndex);
+PNMI_STATIC void CheckVctStatus(SK_AC *, SK_IOC, char *, SK_U32, SK_U32);
+
+/*
+ * Table to correlate OID with handler function and index to
+ * hardware register stored in StatAddress if applicable.
+ */
+#include "skgemib.c"
+
+/* global variables **********************************************************/
+
+/*
+ * Overflow status register bit table and corresponding counter
+ * dependent on MAC type - the number relates to the size of overflow
+ * mask returned by the pFnMacOverflow function
+ */
+PNMI_STATIC const SK_U16 StatOvrflwBit[][SK_PNMI_MAC_TYPES] = {
+/* Bit0  */	{ SK_PNMI_HTX, 				SK_PNMI_HTX_UNICAST},
+/* Bit1  */	{ SK_PNMI_HTX_OCTETHIGH, 	SK_PNMI_HTX_BROADCAST},
+/* Bit2  */	{ SK_PNMI_HTX_OCTETLOW, 	SK_PNMI_HTX_PMACC},
+/* Bit3  */	{ SK_PNMI_HTX_BROADCAST, 	SK_PNMI_HTX_MULTICAST},
+/* Bit4  */	{ SK_PNMI_HTX_MULTICAST, 	SK_PNMI_HTX_OCTETLOW},
+/* Bit5  */	{ SK_PNMI_HTX_UNICAST, 		SK_PNMI_HTX_OCTETHIGH},
+/* Bit6  */	{ SK_PNMI_HTX_LONGFRAMES, 	SK_PNMI_HTX_64},
+/* Bit7  */	{ SK_PNMI_HTX_BURST, 		SK_PNMI_HTX_127},
+/* Bit8  */	{ SK_PNMI_HTX_PMACC, 		SK_PNMI_HTX_255},
+/* Bit9  */	{ SK_PNMI_HTX_MACC, 		SK_PNMI_HTX_511},
+/* Bit10 */	{ SK_PNMI_HTX_SINGLE_COL, 	SK_PNMI_HTX_1023},
+/* Bit11 */	{ SK_PNMI_HTX_MULTI_COL, 	SK_PNMI_HTX_MAX},
+/* Bit12 */	{ SK_PNMI_HTX_EXCESS_COL, 	SK_PNMI_HTX_LONGFRAMES},
+/* Bit13 */	{ SK_PNMI_HTX_LATE_COL, 	SK_PNMI_HTX_RESERVED},
+/* Bit14 */	{ SK_PNMI_HTX_DEFFERAL, 	SK_PNMI_HTX_COL},
+/* Bit15 */	{ SK_PNMI_HTX_EXCESS_DEF, 	SK_PNMI_HTX_LATE_COL},
+/* Bit16 */	{ SK_PNMI_HTX_UNDERRUN, 	SK_PNMI_HTX_EXCESS_COL},
+/* Bit17 */	{ SK_PNMI_HTX_CARRIER, 		SK_PNMI_HTX_MULTI_COL},
+/* Bit18 */	{ SK_PNMI_HTX_UTILUNDER, 	SK_PNMI_HTX_SINGLE_COL},
+/* Bit19 */	{ SK_PNMI_HTX_UTILOVER, 	SK_PNMI_HTX_UNDERRUN},
+/* Bit20 */	{ SK_PNMI_HTX_64, 			SK_PNMI_HTX_RESERVED},
+/* Bit21 */	{ SK_PNMI_HTX_127, 			SK_PNMI_HTX_RESERVED},
+/* Bit22 */	{ SK_PNMI_HTX_255, 			SK_PNMI_HTX_RESERVED},
+/* Bit23 */	{ SK_PNMI_HTX_511, 			SK_PNMI_HTX_RESERVED},
+/* Bit24 */	{ SK_PNMI_HTX_1023, 		SK_PNMI_HTX_RESERVED},
+/* Bit25 */	{ SK_PNMI_HTX_MAX, 			SK_PNMI_HTX_RESERVED},
+/* Bit26 */	{ SK_PNMI_HTX_RESERVED, 	SK_PNMI_HTX_RESERVED},
+/* Bit27 */	{ SK_PNMI_HTX_RESERVED, 	SK_PNMI_HTX_RESERVED},
+/* Bit28 */	{ SK_PNMI_HTX_RESERVED, 	SK_PNMI_HTX_RESERVED},
+/* Bit29 */	{ SK_PNMI_HTX_RESERVED, 	SK_PNMI_HTX_RESERVED},
+/* Bit30 */	{ SK_PNMI_HTX_RESERVED, 	SK_PNMI_HTX_RESERVED},
+/* Bit31 */	{ SK_PNMI_HTX_RESERVED, 	SK_PNMI_HTX_RESERVED},
+/* Bit32 */	{ SK_PNMI_HRX, 				SK_PNMI_HRX_UNICAST},
+/* Bit33 */	{ SK_PNMI_HRX_OCTETHIGH, 	SK_PNMI_HRX_BROADCAST},
+/* Bit34 */	{ SK_PNMI_HRX_OCTETLOW, 	SK_PNMI_HRX_PMACC},
+/* Bit35 */	{ SK_PNMI_HRX_BROADCAST, 	SK_PNMI_HRX_MULTICAST},
+/* Bit36 */	{ SK_PNMI_HRX_MULTICAST, 	SK_PNMI_HRX_FCS},
+/* Bit37 */	{ SK_PNMI_HRX_UNICAST, 		SK_PNMI_HRX_RESERVED},
+/* Bit38 */	{ SK_PNMI_HRX_PMACC, 		SK_PNMI_HRX_OCTETLOW},
+/* Bit39 */	{ SK_PNMI_HRX_MACC, 		SK_PNMI_HRX_OCTETHIGH},
+/* Bit40 */	{ SK_PNMI_HRX_PMACC_ERR, 	SK_PNMI_HRX_BADOCTETLOW},
+/* Bit41 */	{ SK_PNMI_HRX_MACC_UNKWN,	SK_PNMI_HRX_BADOCTETHIGH},
+/* Bit42 */	{ SK_PNMI_HRX_BURST, 		SK_PNMI_HRX_UNDERSIZE},
+/* Bit43 */	{ SK_PNMI_HRX_MISSED, 		SK_PNMI_HRX_RUNT},
+/* Bit44 */	{ SK_PNMI_HRX_FRAMING, 		SK_PNMI_HRX_64},
+/* Bit45 */	{ SK_PNMI_HRX_OVERFLOW, 	SK_PNMI_HRX_127},
+/* Bit46 */	{ SK_PNMI_HRX_JABBER, 		SK_PNMI_HRX_255},
+/* Bit47 */	{ SK_PNMI_HRX_CARRIER, 		SK_PNMI_HRX_511},
+/* Bit48 */	{ SK_PNMI_HRX_IRLENGTH, 	SK_PNMI_HRX_1023},
+/* Bit49 */	{ SK_PNMI_HRX_SYMBOL, 		SK_PNMI_HRX_MAX},
+/* Bit50 */	{ SK_PNMI_HRX_SHORTS, 		SK_PNMI_HRX_LONGFRAMES},
+/* Bit51 */	{ SK_PNMI_HRX_RUNT, 		SK_PNMI_HRX_TOO_LONG},
+/* Bit52 */	{ SK_PNMI_HRX_TOO_LONG, 	SK_PNMI_HRX_JABBER},
+/* Bit53 */	{ SK_PNMI_HRX_FCS, 			SK_PNMI_HRX_RESERVED},
+/* Bit54 */	{ SK_PNMI_HRX_RESERVED, 	SK_PNMI_HRX_OVERFLOW},
+/* Bit55 */	{ SK_PNMI_HRX_CEXT, 		SK_PNMI_HRX_RESERVED},
+/* Bit56 */	{ SK_PNMI_HRX_UTILUNDER, 	SK_PNMI_HRX_RESERVED},
+/* Bit57 */	{ SK_PNMI_HRX_UTILOVER, 	SK_PNMI_HRX_RESERVED},
+/* Bit58 */	{ SK_PNMI_HRX_64, 			SK_PNMI_HRX_RESERVED},
+/* Bit59 */	{ SK_PNMI_HRX_127, 			SK_PNMI_HRX_RESERVED},
+/* Bit60 */	{ SK_PNMI_HRX_255, 			SK_PNMI_HRX_RESERVED},
+/* Bit61 */	{ SK_PNMI_HRX_511, 			SK_PNMI_HRX_RESERVED},
+/* Bit62 */	{ SK_PNMI_HRX_1023, 		SK_PNMI_HRX_RESERVED},
+/* Bit63 */	{ SK_PNMI_HRX_MAX, 			SK_PNMI_HRX_RESERVED}
+};
+
+/*
+ * Table for hardware register saving on resets and port switches
+ */
+PNMI_STATIC const SK_PNMI_STATADDR StatAddr[SK_PNMI_MAX_IDX][SK_PNMI_MAC_TYPES] = {
+	/* SK_PNMI_HTX */
+	{{XM_TXF_OK, SK_TRUE}, {0, SK_FALSE}},
+	/* SK_PNMI_HTX_OCTETHIGH */
+	{{XM_TXO_OK_HI, SK_TRUE}, {GM_TXO_OK_HI, SK_TRUE}},
+	/* SK_PNMI_HTX_OCTETLOW */
+	{{XM_TXO_OK_LO, SK_FALSE}, {GM_TXO_OK_LO, SK_FALSE}},
+	/* SK_PNMI_HTX_BROADCAST */
+	{{XM_TXF_BC_OK, SK_TRUE}, {GM_TXF_BC_OK, SK_TRUE}},
+	/* SK_PNMI_HTX_MULTICAST */
+	{{XM_TXF_MC_OK, SK_TRUE}, {GM_TXF_MC_OK, SK_TRUE}},
+	/* SK_PNMI_HTX_UNICAST */
+	{{XM_TXF_UC_OK, SK_TRUE}, {GM_TXF_UC_OK, SK_TRUE}},
+	/* SK_PNMI_HTX_BURST */
+	{{XM_TXE_BURST, SK_TRUE}, {0, SK_FALSE}},
+	/* SK_PNMI_HTX_PMACC */
+	{{XM_TXF_MPAUSE, SK_TRUE}, {GM_TXF_MPAUSE, SK_TRUE}},
+	/* SK_PNMI_HTX_MACC */
+	{{XM_TXF_MCTRL, SK_TRUE}, {0, SK_FALSE}},
+	/* SK_PNMI_HTX_COL */
+	{{0, SK_FALSE}, {GM_TXF_COL, SK_TRUE}},
+	/* SK_PNMI_HTX_SINGLE_COL */
+	{{XM_TXF_SNG_COL, SK_TRUE}, {GM_TXF_SNG_COL, SK_TRUE}},
+	/* SK_PNMI_HTX_MULTI_COL */
+	{{XM_TXF_MUL_COL, SK_TRUE}, {GM_TXF_MUL_COL, SK_TRUE}},
+	/* SK_PNMI_HTX_EXCESS_COL */
+	{{XM_TXF_ABO_COL, SK_TRUE}, {GM_TXF_ABO_COL, SK_TRUE}},
+	/* SK_PNMI_HTX_LATE_COL */
+	{{XM_TXF_LAT_COL, SK_TRUE}, {GM_TXF_LAT_COL, SK_TRUE}},
+	/* SK_PNMI_HTX_DEFFERAL */
+	{{XM_TXF_DEF, SK_TRUE}, {0, SK_FALSE}},
+	/* SK_PNMI_HTX_EXCESS_DEF */
+	{{XM_TXF_EX_DEF, SK_TRUE}, {0, SK_FALSE}},
+	/* SK_PNMI_HTX_UNDERRUN */
+	{{XM_TXE_FIFO_UR, SK_TRUE}, {GM_TXE_FIFO_UR, SK_TRUE}},
+	/* SK_PNMI_HTX_CARRIER */
+	{{XM_TXE_CS_ERR, SK_TRUE}, {0, SK_FALSE}},
+	/* SK_PNMI_HTX_UTILUNDER */
+	{{0, SK_FALSE}, {0, SK_FALSE}},
+	/* SK_PNMI_HTX_UTILOVER */
+	{{0, SK_FALSE}, {0, SK_FALSE}},
+	/* SK_PNMI_HTX_64 */
+	{{XM_TXF_64B, SK_TRUE}, {GM_TXF_64B, SK_TRUE}},
+	/* SK_PNMI_HTX_127 */
+	{{XM_TXF_127B, SK_TRUE}, {GM_TXF_127B, SK_TRUE}},
+	/* SK_PNMI_HTX_255 */
+	{{XM_TXF_255B, SK_TRUE}, {GM_TXF_255B, SK_TRUE}},
+	/* SK_PNMI_HTX_511 */
+	{{XM_TXF_511B, SK_TRUE}, {GM_TXF_511B, SK_TRUE}},
+	/* SK_PNMI_HTX_1023 */
+	{{XM_TXF_1023B, SK_TRUE}, {GM_TXF_1023B, SK_TRUE}},
+	/* SK_PNMI_HTX_MAX */
+	{{XM_TXF_MAX_SZ, SK_TRUE}, {GM_TXF_1518B, SK_TRUE}},
+	/* SK_PNMI_HTX_LONGFRAMES  */
+	{{XM_TXF_LONG, SK_TRUE}, {GM_TXF_MAX_SZ, SK_TRUE}},
+	/* SK_PNMI_HTX_SYNC */
+	{{0, SK_FALSE}, {0, SK_FALSE}},
+	/* SK_PNMI_HTX_SYNC_OCTET */
+	{{0, SK_FALSE}, {0, SK_FALSE}},
+	/* SK_PNMI_HTX_RESERVED */
+	{{0, SK_FALSE}, {0, SK_FALSE}},
+	/* SK_PNMI_HRX */
+	{{XM_RXF_OK, SK_TRUE}, {0, SK_FALSE}},
+	/* SK_PNMI_HRX_OCTETHIGH */
+	{{XM_RXO_OK_HI, SK_TRUE}, {GM_RXO_OK_HI, SK_TRUE}},
+	/* SK_PNMI_HRX_OCTETLOW */
+	{{XM_RXO_OK_LO, SK_FALSE}, {GM_RXO_OK_LO, SK_FALSE}},
+	/* SK_PNMI_HRX_BADOCTETHIGH */
+	{{0, SK_FALSE}, {GM_RXO_ERR_HI, SK_TRUE}},
+	/* SK_PNMI_HRX_BADOCTETLOW */
+	{{0, SK_FALSE}, {GM_RXO_ERR_LO, SK_TRUE}},
+	/* SK_PNMI_HRX_BROADCAST */
+	{{XM_RXF_BC_OK, SK_TRUE}, {GM_RXF_BC_OK, SK_TRUE}},
+	/* SK_PNMI_HRX_MULTICAST */
+	{{XM_RXF_MC_OK, SK_TRUE}, {GM_RXF_MC_OK, SK_TRUE}},
+	/* SK_PNMI_HRX_UNICAST */
+	{{XM_RXF_UC_OK, SK_TRUE}, {GM_RXF_UC_OK, SK_TRUE}},
+	/* SK_PNMI_HRX_PMACC */
+	{{XM_RXF_MPAUSE, SK_TRUE}, {GM_RXF_MPAUSE, SK_TRUE}},
+	/* SK_PNMI_HRX_MACC */
+	{{XM_RXF_MCTRL, SK_TRUE}, {0, SK_FALSE}},
+	/* SK_PNMI_HRX_PMACC_ERR */
+	{{XM_RXF_INV_MP, SK_TRUE}, {0, SK_FALSE}},
+	/* SK_PNMI_HRX_MACC_UNKWN */
+	{{XM_RXF_INV_MOC, SK_TRUE}, {0, SK_FALSE}},
+	/* SK_PNMI_HRX_BURST */
+	{{XM_RXE_BURST, SK_TRUE}, {0, SK_FALSE}},
+	/* SK_PNMI_HRX_MISSED */
+	{{XM_RXE_FMISS, SK_TRUE}, {0, SK_FALSE}},
+	/* SK_PNMI_HRX_FRAMING */
+	{{XM_RXF_FRA_ERR, SK_TRUE}, {0, SK_FALSE}},
+	/* SK_PNMI_HRX_UNDERSIZE */
+	{{0, SK_FALSE}, {GM_RXF_SHT, SK_TRUE}},
+	/* SK_PNMI_HRX_OVERFLOW */
+	{{XM_RXE_FIFO_OV, SK_TRUE}, {GM_RXE_FIFO_OV, SK_TRUE}},
+	/* SK_PNMI_HRX_JABBER */
+	{{XM_RXF_JAB_PKT, SK_TRUE}, {GM_RXF_JAB_PKT, SK_TRUE}},
+	/* SK_PNMI_HRX_CARRIER */
+	{{XM_RXE_CAR_ERR, SK_TRUE}, {0, SK_FALSE}},
+	/* SK_PNMI_HRX_IRLENGTH */
+	{{XM_RXF_LEN_ERR, SK_TRUE}, {0, SK_FALSE}},
+	/* SK_PNMI_HRX_SYMBOL */
+	{{XM_RXE_SYM_ERR, SK_TRUE}, {0, SK_FALSE}},
+	/* SK_PNMI_HRX_SHORTS */
+	{{XM_RXE_SHT_ERR, SK_TRUE}, {0, SK_FALSE}},
+	/* SK_PNMI_HRX_RUNT */
+	{{XM_RXE_RUNT, SK_TRUE}, {GM_RXE_FRAG, SK_TRUE}},
+	/* SK_PNMI_HRX_TOO_LONG */
+	{{XM_RXF_LNG_ERR, SK_TRUE}, {GM_RXF_LNG_ERR, SK_TRUE}},
+	/* SK_PNMI_HRX_FCS */
+	{{XM_RXF_FCS_ERR, SK_TRUE}, {GM_RXF_FCS_ERR, SK_TRUE}},
+	/* SK_PNMI_HRX_CEXT */
+	{{XM_RXF_CEX_ERR, SK_TRUE}, {0, SK_FALSE}},
+	/* SK_PNMI_HRX_UTILUNDER */
+	{{0, SK_FALSE}, {0, SK_FALSE}},
+	/* SK_PNMI_HRX_UTILOVER */
+	{{0, SK_FALSE}, {0, SK_FALSE}},
+	/* SK_PNMI_HRX_64 */
+	{{XM_RXF_64B, SK_TRUE}, {GM_RXF_64B, SK_TRUE}},
+	/* SK_PNMI_HRX_127 */
+	{{XM_RXF_127B, SK_TRUE}, {GM_RXF_127B, SK_TRUE}},
+	/* SK_PNMI_HRX_255 */
+	{{XM_RXF_255B, SK_TRUE}, {GM_RXF_255B, SK_TRUE}},
+	/* SK_PNMI_HRX_511 */
+	{{XM_RXF_511B, SK_TRUE}, {GM_RXF_511B, SK_TRUE}},
+	/* SK_PNMI_HRX_1023 */
+	{{XM_RXF_1023B, SK_TRUE}, {GM_RXF_1023B, SK_TRUE}},
+	/* SK_PNMI_HRX_MAX */
+	{{XM_RXF_MAX_SZ, SK_TRUE}, {GM_RXF_1518B, SK_TRUE}},
+	/* SK_PNMI_HRX_LONGFRAMES */
+	{{0, SK_FALSE}, {GM_RXF_MAX_SZ, SK_TRUE}},
+	/* SK_PNMI_HRX_RESERVED */
+	{{0, SK_FALSE}, {0, SK_FALSE}}
+};
+
+
+/*****************************************************************************
+ *
+ * Public functions
+ *
+ */
+
+/*****************************************************************************
+ *
+ * SkPnmiInit - Init function of PNMI
+ *
+ * Description:
+ *	SK_INIT_DATA: Initialises the data structures
+ *	SK_INIT_IO:   Resets the XMAC statistics, determines the device and
+ *	              connector type.
+ *	SK_INIT_RUN:  Starts a timer event for port switch per hour
+ *	              calculation.
+ *
+ * Returns:
+ *	Always 0
+ */
+int SkPnmiInit(
+SK_AC *pAC,		/* Pointer to adapter context */
+SK_IOC IoC,		/* IO context handle */
+int Level)		/* Initialization level */
+{
+	unsigned int	PortMax;	/* Number of ports */
+	unsigned int	PortIndex;	/* Current port index in loop */
+	SK_U16		Val16;		/* Multiple purpose 16 bit variable */
+	SK_U8		Val8;		/* Mulitple purpose 8 bit variable */
+	SK_EVPARA	EventParam;	/* Event struct for timer event */
+	SK_PNMI_VCT	*pVctBackupData;
+
+
+	SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL,
+		("PNMI: SkPnmiInit: Called, level=%d\n", Level));
+
+	switch (Level) {
+
+	case SK_INIT_DATA:
+		SK_MEMSET((char *)&pAC->Pnmi, 0, sizeof(pAC->Pnmi));
+		pAC->Pnmi.TrapBufFree = SK_PNMI_TRAP_QUEUE_LEN;
+		pAC->Pnmi.StartUpTime = SK_PNMI_HUNDREDS_SEC(SkOsGetTime(pAC));
+		pAC->Pnmi.RlmtChangeThreshold = SK_PNMI_DEF_RLMT_CHG_THRES;
+		for (PortIndex = 0; PortIndex < SK_MAX_MACS; PortIndex ++) {
+
+			pAC->Pnmi.Port[PortIndex].ActiveFlag = SK_FALSE;
+			pAC->Pnmi.DualNetActiveFlag = SK_FALSE;
+		}
+
+#ifdef SK_PNMI_CHECK
+		if (SK_PNMI_MAX_IDX != SK_PNMI_CNT_NO) {
+			
+			SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR049, SK_PNMI_ERR049MSG);
+
+			SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_INIT | SK_DBGCAT_FATAL,
+					   ("CounterOffset struct size (%d) differs from"
+						"SK_PNMI_MAX_IDX (%d)\n",
+						SK_PNMI_CNT_NO, SK_PNMI_MAX_IDX));
+		}
+
+		if (SK_PNMI_MAX_IDX !=
+			(sizeof(StatAddr) / (sizeof(SK_PNMI_STATADDR) * SK_PNMI_MAC_TYPES))) {
+			
+			SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR050, SK_PNMI_ERR050MSG);
+
+			SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_INIT | SK_DBGCAT_FATAL,
+					   ("StatAddr table size (%d) differs from "
+						"SK_PNMI_MAX_IDX (%d)\n",
+						(sizeof(StatAddr) /
+						 (sizeof(SK_PNMI_STATADDR) * SK_PNMI_MAC_TYPES)),
+						 SK_PNMI_MAX_IDX));
+		}
+#endif /* SK_PNMI_CHECK */
+		break;
+
+	case SK_INIT_IO:
+		/*
+		 * Reset MAC counters
+		 */
+		PortMax = pAC->GIni.GIMacsFound;
+
+		for (PortIndex = 0; PortIndex < PortMax; PortIndex ++) {
+
+			pAC->GIni.GIFunc.pFnMacResetCounter(pAC, IoC, PortIndex);
+		}
+		
+		/* Initialize DSP variables for Vct() to 0xff => Never written! */		
+		for (PortIndex = 0; PortIndex < PortMax; PortIndex ++) {
+			pAC->GIni.GP[PortIndex].PCableLen = 0xff;
+			pVctBackupData = &pAC->Pnmi.VctBackup[PortIndex];
+			pVctBackupData->PCableLen = 0xff;
+		}
+		
+		/*
+		 * Get pci bus speed
+		 */
+		SK_IN16(IoC, B0_CTST, &Val16);
+		if ((Val16 & CS_BUS_CLOCK) == 0) {
+
+			pAC->Pnmi.PciBusSpeed = 33;
+		}
+		else {
+			pAC->Pnmi.PciBusSpeed = 66;
+		}
+
+		/*
+		 * Get pci bus width
+		 */
+		SK_IN16(IoC, B0_CTST, &Val16);
+		if ((Val16 & CS_BUS_SLOT_SZ) == 0) {
+
+			pAC->Pnmi.PciBusWidth = 32;
+		}
+		else {
+			pAC->Pnmi.PciBusWidth = 64;
+		}
+
+		/*
+		 * Get chipset
+		 */
+		switch (pAC->GIni.GIChipId) {
+		case CHIP_ID_GENESIS:
+			pAC->Pnmi.Chipset = SK_PNMI_CHIPSET_XMAC;
+			break;
+
+		case CHIP_ID_YUKON:
+			pAC->Pnmi.Chipset = SK_PNMI_CHIPSET_YUKON;
+			break;
+
+		default:
+			break;
+		}
+
+		/*
+		 * Get PMD and DeviceType
+		 */
+		SK_IN8(IoC, B2_PMD_TYP, &Val8);
+		switch (Val8) {
+		case 'S':
+			pAC->Pnmi.PMD = 3;
+			if (pAC->GIni.GIMacsFound > 1) {
+
+				pAC->Pnmi.DeviceType = 0x00020002;
+			}
+			else {
+				pAC->Pnmi.DeviceType = 0x00020001;
+			}
+			break;
+
+		case 'L':
+			pAC->Pnmi.PMD = 2;
+			if (pAC->GIni.GIMacsFound > 1) {
+
+				pAC->Pnmi.DeviceType = 0x00020004;
+			}
+			else {
+				pAC->Pnmi.DeviceType = 0x00020003;
+			}
+			break;
+
+		case 'C':
+			pAC->Pnmi.PMD = 4;
+			if (pAC->GIni.GIMacsFound > 1) {
+
+				pAC->Pnmi.DeviceType = 0x00020006;
+			}
+			else {
+				pAC->Pnmi.DeviceType = 0x00020005;
+			}
+			break;
+
+		case 'T':
+			pAC->Pnmi.PMD = 5;
+			if (pAC->GIni.GIMacsFound > 1) {
+
+				pAC->Pnmi.DeviceType = 0x00020008;
+			}
+			else {
+				pAC->Pnmi.DeviceType = 0x00020007;
+			}
+			break;
+
+		default :
+			pAC->Pnmi.PMD = 1;
+			pAC->Pnmi.DeviceType = 0;
+			break;
+		}
+
+		/*
+		 * Get connector
+		 */
+		SK_IN8(IoC, B2_CONN_TYP, &Val8);
+		switch (Val8) {
+		case 'C':
+			pAC->Pnmi.Connector = 2;
+			break;
+
+		case 'D':
+			pAC->Pnmi.Connector = 3;
+			break;
+
+		case 'F':
+			pAC->Pnmi.Connector = 4;
+			break;
+
+		case 'J':
+			pAC->Pnmi.Connector = 5;
+			break;
+
+		case 'V':
+			pAC->Pnmi.Connector = 6;
+			break;
+
+		default:
+			pAC->Pnmi.Connector = 1;
+			break;
+		}
+		break;
+
+	case SK_INIT_RUN:
+		/*
+		 * Start timer for RLMT change counter
+		 */
+		SK_MEMSET((char *)&EventParam, 0, sizeof(EventParam));
+		SkTimerStart(pAC, IoC, &pAC->Pnmi.RlmtChangeEstimate.EstTimer,
+			28125000, SKGE_PNMI, SK_PNMI_EVT_CHG_EST_TIMER,
+			EventParam);
+		break;
+
+	default:
+		break; /* Nothing todo */
+	}
+
+	return (0);
+}
+
+/*****************************************************************************
+ *
+ * SkPnmiGetVar - Retrieves the value of a single OID
+ *
+ * Description:
+ *	Calls a general sub-function for all this stuff. If the instance
+ *	-1 is passed, the values of all instances are returned in an
+ *	array of values.
+ *
+ * Returns:
+ *	SK_PNMI_ERR_OK           The request was successfully performed
+ *	SK_PNMI_ERR_GENERAL      A general severe internal error occured
+ *	SK_PNMI_ERR_TOO_SHORT    The passed buffer is too short to take
+ *	                         the data.
+ *	SK_PNMI_ERR_UNKNOWN_OID  The requested OID is unknown
+ *	SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't
+ *                           exist (e.g. port instance 3 on a two port
+ *	                         adapter.
+ */
+static int SkPnmiGetVar(
+SK_AC *pAC,		/* Pointer to adapter context */
+SK_IOC IoC,		/* IO context handle */
+SK_U32 Id,		/* Object ID that is to be processed */
+void *pBuf,		/* Buffer to which the management data will be copied */
+unsigned int *pLen,	/* On call: buffer length. On return: used buffer */
+SK_U32 Instance,	/* Instance (1..n) that is to be queried or -1 */
+SK_U32 NetIndex)	/* NetIndex (0..n), in single net mode always zero */
+{
+	SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL,
+		("PNMI: SkPnmiGetVar: Called, Id=0x%x, BufLen=%d, Instance=%d, NetIndex=%d\n",
+			Id, *pLen, Instance, NetIndex));
+
+	return (PnmiVar(pAC, IoC, SK_PNMI_GET, Id, (char *)pBuf, pLen,
+		Instance, NetIndex));
+}
+
+/*****************************************************************************
+ *
+ * SkPnmiPreSetVar - Presets the value of a single OID
+ *
+ * Description:
+ *	Calls a general sub-function for all this stuff. The preset does
+ *	the same as a set, but returns just before finally setting the
+ *	new value. This is useful to check if a set might be successfull.
+ *	If the instance -1 is passed, an array of values is supposed and
+ *	all instances of the OID will be set.
+ *
+ * Returns:
+ *	SK_PNMI_ERR_OK           The request was successfully performed.
+ *	SK_PNMI_ERR_GENERAL      A general severe internal error occured.
+ *	SK_PNMI_ERR_TOO_SHORT    The passed buffer is too short to contain
+ *	                         the correct data (e.g. a 32bit value is
+ *	                         needed, but a 16 bit value was passed).
+ *	SK_PNMI_ERR_BAD_VALUE    The passed value is not in the valid
+ *	                         value range.
+ *	SK_PNMI_ERR_READ_ONLY    The OID is read-only and cannot be set.
+ *	SK_PNMI_ERR_UNKNOWN_OID  The requested OID is unknown.
+ *	SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't
+ *                           exist (e.g. port instance 3 on a two port
+ *	                         adapter.
+ */
+static int SkPnmiPreSetVar(
+SK_AC *pAC,		/* Pointer to adapter context */
+SK_IOC IoC,		/* IO context handle */
+SK_U32 Id,		/* Object ID that is to be processed */
+void *pBuf,		/* Buffer to which the management data will be copied */
+unsigned int *pLen,	/* Total length of management data */
+SK_U32 Instance,	/* Instance (1..n) that is to be set or -1 */
+SK_U32 NetIndex)	/* NetIndex (0..n), in single net mode always zero */
+{
+	SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL,
+		("PNMI: SkPnmiPreSetVar: Called, Id=0x%x, BufLen=%d, Instance=%d, NetIndex=%d\n",
+			Id, *pLen, Instance, NetIndex));
+
+
+	return (PnmiVar(pAC, IoC, SK_PNMI_PRESET, Id, (char *)pBuf, pLen,
+		Instance, NetIndex));
+}
+
+/*****************************************************************************
+ *
+ * SkPnmiSetVar - Sets the value of a single OID
+ *
+ * Description:
+ *	Calls a general sub-function for all this stuff. The preset does
+ *	the same as a set, but returns just before finally setting the
+ *	new value. This is useful to check if a set might be successfull.
+ *	If the instance -1 is passed, an array of values is supposed and
+ *	all instances of the OID will be set.
+ *
+ * Returns:
+ *	SK_PNMI_ERR_OK           The request was successfully performed.
+ *	SK_PNMI_ERR_GENERAL      A general severe internal error occured.
+ *	SK_PNMI_ERR_TOO_SHORT    The passed buffer is too short to contain
+ *	                         the correct data (e.g. a 32bit value is
+ *	                         needed, but a 16 bit value was passed).
+ *	SK_PNMI_ERR_BAD_VALUE    The passed value is not in the valid
+ *	                         value range.
+ *	SK_PNMI_ERR_READ_ONLY    The OID is read-only and cannot be set.
+ *	SK_PNMI_ERR_UNKNOWN_OID  The requested OID is unknown.
+ *	SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't
+ *                           exist (e.g. port instance 3 on a two port
+ *	                         adapter.
+ */
+int SkPnmiSetVar(
+SK_AC *pAC,		/* Pointer to adapter context */
+SK_IOC IoC,		/* IO context handle */
+SK_U32 Id,		/* Object ID that is to be processed */
+void *pBuf,		/* Buffer to which the management data will be copied */
+unsigned int *pLen,	/* Total length of management data */
+SK_U32 Instance,	/* Instance (1..n) that is to be set or -1 */
+SK_U32 NetIndex)	/* NetIndex (0..n), in single net mode always zero */
+{
+	SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL,
+		("PNMI: SkPnmiSetVar: Called, Id=0x%x, BufLen=%d, Instance=%d, NetIndex=%d\n",
+			Id, *pLen, Instance, NetIndex));
+
+	return (PnmiVar(pAC, IoC, SK_PNMI_SET, Id, (char *)pBuf, pLen,
+		Instance, NetIndex));
+}
+
+/*****************************************************************************
+ *
+ * SkPnmiGetStruct - Retrieves the management database in SK_PNMI_STRUCT_DATA
+ *
+ * Description:
+ *	Runs through the IdTable, queries the single OIDs and stores the
+ *	returned data into the management database structure
+ *	SK_PNMI_STRUCT_DATA. The offset of the OID in the structure
+ *	is stored in the IdTable. The return value of the function will also
+ *	be stored in SK_PNMI_STRUCT_DATA if the passed buffer has the
+ *	minimum size of SK_PNMI_MIN_STRUCT_SIZE.
+ *
+ * Returns:
+ *	SK_PNMI_ERR_OK           The request was successfully performed
+ *	SK_PNMI_ERR_GENERAL      A general severe internal error occured
+ *	SK_PNMI_ERR_TOO_SHORT    The passed buffer is too short to take
+ *	                         the data.
+ *	SK_PNMI_ERR_UNKNOWN_NET  The requested NetIndex doesn't exist
+ */
+int SkPnmiGetStruct(
+SK_AC *pAC,		/* Pointer to adapter context */
+SK_IOC IoC,		/* IO context handle */
+void *pBuf,		/* Buffer to which the management data will be copied. */
+unsigned int *pLen,	/* Length of buffer */
+SK_U32 NetIndex)	/* NetIndex (0..n), in single net mode always zero */
+{
+	int		Ret;
+	unsigned int	TableIndex;
+	unsigned int	DstOffset;
+	unsigned int	InstanceNo;
+	unsigned int	InstanceCnt;
+	SK_U32		Instance;
+	unsigned int	TmpLen;
+	char		KeyArr[SK_PNMI_VPD_ENTRIES][SK_PNMI_VPD_KEY_SIZE];
+
+
+	SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL,
+		("PNMI: SkPnmiGetStruct: Called, BufLen=%d, NetIndex=%d\n",
+			*pLen, NetIndex));
+
+	if (*pLen < SK_PNMI_STRUCT_SIZE) {
+
+		if (*pLen >= SK_PNMI_MIN_STRUCT_SIZE) {
+
+			SK_PNMI_SET_STAT(pBuf, SK_PNMI_ERR_TOO_SHORT,
+				(SK_U32)(-1));
+		}
+
+		*pLen = SK_PNMI_STRUCT_SIZE;
+		return (SK_PNMI_ERR_TOO_SHORT);
+	}
+
+    /*
+     * Check NetIndex
+     */
+	if (NetIndex >= pAC->Rlmt.NumNets) {
+		return (SK_PNMI_ERR_UNKNOWN_NET);
+	}
+
+	/* Update statistic */
+	SK_PNMI_CHECKFLAGS("SkPnmiGetStruct: On call");
+
+	if ((Ret = MacUpdate(pAC, IoC, 0, pAC->GIni.GIMacsFound - 1)) !=
+		SK_PNMI_ERR_OK) {
+
+		SK_PNMI_SET_STAT(pBuf, Ret, (SK_U32)(-1));
+		*pLen = SK_PNMI_MIN_STRUCT_SIZE;
+		return (Ret);
+	}
+
+	if ((Ret = RlmtUpdate(pAC, IoC, NetIndex)) != SK_PNMI_ERR_OK) {
+
+		SK_PNMI_SET_STAT(pBuf, Ret, (SK_U32)(-1));
+		*pLen = SK_PNMI_MIN_STRUCT_SIZE;
+		return (Ret);
+	}
+
+	if ((Ret = SirqUpdate(pAC, IoC)) != SK_PNMI_ERR_OK) {
+
+		SK_PNMI_SET_STAT(pBuf, Ret, (SK_U32)(-1));
+		*pLen = SK_PNMI_MIN_STRUCT_SIZE;
+		return (Ret);
+	}
+
+	/*
+	 * Increment semaphores to indicate that an update was
+	 * already done
+	 */
+	pAC->Pnmi.MacUpdatedFlag ++;
+	pAC->Pnmi.RlmtUpdatedFlag ++;
+	pAC->Pnmi.SirqUpdatedFlag ++;
+
+	/* Get vpd keys for instance calculation */
+	Ret = GetVpdKeyArr(pAC, IoC, &KeyArr[0][0], sizeof(KeyArr), &TmpLen);
+	if (Ret != SK_PNMI_ERR_OK) {
+
+		pAC->Pnmi.MacUpdatedFlag --;
+		pAC->Pnmi.RlmtUpdatedFlag --;
+		pAC->Pnmi.SirqUpdatedFlag --;
+
+		SK_PNMI_CHECKFLAGS("SkPnmiGetStruct: On return");
+		SK_PNMI_SET_STAT(pBuf, Ret, (SK_U32)(-1));
+		*pLen = SK_PNMI_MIN_STRUCT_SIZE;
+		return (SK_PNMI_ERR_GENERAL);
+	}
+
+	/* Retrieve values */
+	SK_MEMSET((char *)pBuf, 0, SK_PNMI_STRUCT_SIZE);
+	for (TableIndex = 0; TableIndex < ID_TABLE_SIZE; TableIndex ++) {
+
+		InstanceNo = IdTable[TableIndex].InstanceNo;
+		for (InstanceCnt = 1; InstanceCnt <= InstanceNo;
+			InstanceCnt ++) {
+
+			DstOffset = IdTable[TableIndex].Offset +
+				(InstanceCnt - 1) *
+				IdTable[TableIndex].StructSize;
+
+			/*
+			 * For the VPD the instance is not an index number
+			 * but the key itself. Determin with the instance
+			 * counter the VPD key to be used.
+			 */
+			if (IdTable[TableIndex].Id == OID_SKGE_VPD_KEY ||
+				IdTable[TableIndex].Id == OID_SKGE_VPD_VALUE ||
+				IdTable[TableIndex].Id == OID_SKGE_VPD_ACCESS ||
+				IdTable[TableIndex].Id == OID_SKGE_VPD_ACTION) {
+
+				SK_STRNCPY((char *)&Instance, KeyArr[InstanceCnt - 1], 4);
+			}
+			else {
+				Instance = (SK_U32)InstanceCnt;
+			}
+
+			TmpLen = *pLen - DstOffset;
+			Ret = IdTable[TableIndex].Func(pAC, IoC, SK_PNMI_GET,
+				IdTable[TableIndex].Id, (char *)pBuf +
+				DstOffset, &TmpLen, Instance, TableIndex, NetIndex);
+
+			/*
+			 * An unknown instance error means that we reached
+			 * the last instance of that variable. Proceed with
+			 * the next OID in the table and ignore the return
+			 * code.
+			 */
+			if (Ret == SK_PNMI_ERR_UNKNOWN_INST) {
+
+                break;
+			}
+
+			if (Ret != SK_PNMI_ERR_OK) {
+
+				pAC->Pnmi.MacUpdatedFlag --;
+				pAC->Pnmi.RlmtUpdatedFlag --;
+				pAC->Pnmi.SirqUpdatedFlag --;
+
+				SK_PNMI_CHECKFLAGS("SkPnmiGetStruct: On return");
+				SK_PNMI_SET_STAT(pBuf, Ret, DstOffset);
+				*pLen = SK_PNMI_MIN_STRUCT_SIZE;
+				return (Ret);
+			}
+		}
+	}
+
+	pAC->Pnmi.MacUpdatedFlag --;
+	pAC->Pnmi.RlmtUpdatedFlag --;
+	pAC->Pnmi.SirqUpdatedFlag --;
+
+	*pLen = SK_PNMI_STRUCT_SIZE;
+	SK_PNMI_CHECKFLAGS("SkPnmiGetStruct: On return");
+	SK_PNMI_SET_STAT(pBuf, SK_PNMI_ERR_OK, (SK_U32)(-1));
+	return (SK_PNMI_ERR_OK);
+}
+
+/*****************************************************************************
+ *
+ * SkPnmiPreSetStruct - Presets the management database in SK_PNMI_STRUCT_DATA
+ *
+ * Description:
+ *	Calls a general sub-function for all this set stuff. The preset does
+ *	the same as a set, but returns just before finally setting the
+ *	new value. This is useful to check if a set might be successfull.
+ *	The sub-function runs through the IdTable, checks which OIDs are able
+ *	to set, and calls the handler function of the OID to perform the
+ *	preset. The return value of the function will also be stored in
+ *	SK_PNMI_STRUCT_DATA if the passed buffer has the minimum size of
+ *	SK_PNMI_MIN_STRUCT_SIZE.
+ *
+ * Returns:
+ *	SK_PNMI_ERR_OK           The request was successfully performed.
+ *	SK_PNMI_ERR_GENERAL      A general severe internal error occured.
+ *	SK_PNMI_ERR_TOO_SHORT    The passed buffer is too short to contain
+ *	                         the correct data (e.g. a 32bit value is
+ *	                         needed, but a 16 bit value was passed).
+ *	SK_PNMI_ERR_BAD_VALUE    The passed value is not in the valid
+ *	                         value range.
+ */
+int SkPnmiPreSetStruct(
+SK_AC *pAC,		/* Pointer to adapter context */
+SK_IOC IoC,		/* IO context handle */
+void *pBuf,		/* Buffer which contains the data to be set */
+unsigned int *pLen,	/* Length of buffer */
+SK_U32 NetIndex)	/* NetIndex (0..n), in single net mode always zero */
+{
+	SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL,
+		("PNMI: SkPnmiPreSetStruct: Called, BufLen=%d, NetIndex=%d\n",
+			*pLen, NetIndex));
+
+	return (PnmiStruct(pAC, IoC, SK_PNMI_PRESET, (char *)pBuf,
+    					pLen, NetIndex));
+}
+
+/*****************************************************************************
+ *
+ * SkPnmiSetStruct - Sets the management database in SK_PNMI_STRUCT_DATA
+ *
+ * Description:
+ *	Calls a general sub-function for all this set stuff. The return value
+ *	of the function will also be stored in SK_PNMI_STRUCT_DATA if the
+ *	passed buffer has the minimum size of SK_PNMI_MIN_STRUCT_SIZE.
+ *	The sub-function runs through the IdTable, checks which OIDs are able
+ *	to set, and calls the handler function of the OID to perform the
+ *	set. The return value of the function will also be stored in
+ *	SK_PNMI_STRUCT_DATA if the passed buffer has the minimum size of
+ *	SK_PNMI_MIN_STRUCT_SIZE.
+ *
+ * Returns:
+ *	SK_PNMI_ERR_OK           The request was successfully performed.
+ *	SK_PNMI_ERR_GENERAL      A general severe internal error occured.
+ *	SK_PNMI_ERR_TOO_SHORT    The passed buffer is too short to contain
+ *	                         the correct data (e.g. a 32bit value is
+ *	                         needed, but a 16 bit value was passed).
+ *	SK_PNMI_ERR_BAD_VALUE    The passed value is not in the valid
+ *	                         value range.
+ */
+int SkPnmiSetStruct(
+SK_AC *pAC,		/* Pointer to adapter context */
+SK_IOC IoC,		/* IO context handle */
+void *pBuf,		/* Buffer which contains the data to be set */
+unsigned int *pLen,	/* Length of buffer */
+SK_U32 NetIndex)	/* NetIndex (0..n), in single net mode always zero */
+{
+	SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL,
+		("PNMI: SkPnmiSetStruct: Called, BufLen=%d, NetIndex=%d\n",
+			*pLen, NetIndex));
+
+	return (PnmiStruct(pAC, IoC, SK_PNMI_SET, (char *)pBuf,
+    					pLen, NetIndex));
+}
+
+/*****************************************************************************
+ *
+ * SkPnmiEvent - Event handler
+ *
+ * Description:
+ *	Handles the following events:
+ *	SK_PNMI_EVT_SIRQ_OVERFLOW     When a hardware counter overflows an
+ *	                              interrupt will be generated which is
+ *	                              first handled by SIRQ which generates a
+ *	                              this event. The event increments the
+ *	                              upper 32 bit of the 64 bit counter.
+ *	SK_PNMI_EVT_SEN_XXX           The event is generated by the I2C module
+ *	                              when a sensor reports a warning or
+ *	                              error. The event will store a trap
+ *	                              message in the trap buffer.
+ *	SK_PNMI_EVT_CHG_EST_TIMER     The timer event was initiated by this
+ *	                              module and is used to calculate the
+ *	                              port switches per hour.
+ *	SK_PNMI_EVT_CLEAR_COUNTER     The event clears all counters and
+ *	                              timestamps.
+ *	SK_PNMI_EVT_XMAC_RESET        The event is generated by the driver
+ *	                              before a hard reset of the XMAC is
+ *	                              performed. All counters will be saved
+ *	                              and added to the hardware counter
+ *	                              values after reset to grant continuous
+ *	                              counter values.
+ *	SK_PNMI_EVT_RLMT_PORT_UP      Generated by RLMT to notify that a port
+ *	                              went logically up. A trap message will
+ *	                              be stored to the trap buffer.
+ *	SK_PNMI_EVT_RLMT_PORT_DOWN    Generated by RLMT to notify that a port
+ *	                              went logically down. A trap message will
+ *	                              be stored to the trap buffer.
+ *	SK_PNMI_EVT_RLMT_SEGMENTATION Generated by RLMT to notify that two
+ *	                              spanning tree root bridges were
+ *	                              detected. A trap message will be stored
+ *	                              to the trap buffer.
+ *	SK_PNMI_EVT_RLMT_ACTIVE_DOWN  Notifies PNMI that an active port went
+ *	                              down. PNMI will not further add the
+ *	                              statistic values to the virtual port.
+ *	SK_PNMI_EVT_RLMT_ACTIVE_UP    Notifies PNMI that a port went up and
+ *	                              is now an active port. PNMI will now
+ *	                              add the statistic data of this port to
+ *	                              the virtual port.
+ *	SK_PNMI_EVT_RLMT_SET_NETS     Notifies PNMI about the net mode. The first parameter
+ *	                              contains the number of nets. 1 means single net, 2 means
+ *	                              dual net. The second parameter is -1
+ *
+ * Returns:
+ *	Always 0
+ */
+int SkPnmiEvent(
+SK_AC *pAC,		/* Pointer to adapter context */
+SK_IOC IoC,		/* IO context handle */
+SK_U32 Event,		/* Event-Id */
+SK_EVPARA Param)	/* Event dependent parameter */
+{
+	unsigned int	PhysPortIndex;
+    unsigned int	MaxNetNumber;
+	int			CounterIndex;
+	int			Ret;
+	SK_U16		MacStatus;
+	SK_U64		OverflowStatus;
+	SK_U64		Mask;
+	int			MacType;
+	SK_U64		Value;
+	SK_U32		Val32;
+	SK_U16		Register;
+	SK_EVPARA	EventParam;
+	SK_U64		NewestValue;
+	SK_U64		OldestValue;
+	SK_U64		Delta;
+	SK_PNMI_ESTIMATE *pEst;
+	SK_U32		NetIndex;
+	SK_GEPORT	*pPrt;
+	SK_PNMI_VCT	*pVctBackupData;
+	SK_U32		RetCode;
+	int		i;
+	SK_U32		CableLength;
+
+
+#ifdef DEBUG
+	if (Event != SK_PNMI_EVT_XMAC_RESET) {
+
+		SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL,
+			("PNMI: SkPnmiEvent: Called, Event=0x%x, Param=0x%x\n",
+			(unsigned int)Event, (unsigned int)Param.Para64));
+	}
+#endif /* DEBUG */
+	SK_PNMI_CHECKFLAGS("SkPnmiEvent: On call");
+
+	MacType = pAC->GIni.GIMacType;
+	
+	switch (Event) {
+
+	case SK_PNMI_EVT_SIRQ_OVERFLOW:
+		PhysPortIndex = (int)Param.Para32[0];
+		MacStatus = (SK_U16)Param.Para32[1];
+#ifdef DEBUG
+		if (PhysPortIndex >= SK_MAX_MACS) {
+
+			SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL,
+				("PNMI: ERR: SkPnmiEvent: SK_PNMI_EVT_SIRQ_OVERFLOW parameter"
+				 " wrong, PhysPortIndex=0x%x\n",
+				PhysPortIndex));
+			return (0);
+		}
+#endif /* DEBUG */
+		OverflowStatus = 0;
+
+		/*
+		 * Check which source caused an overflow interrupt.
+		 */
+		if ((pAC->GIni.GIFunc.pFnMacOverflow(pAC, IoC, PhysPortIndex,
+				MacStatus, &OverflowStatus) != 0) ||
+			(OverflowStatus == 0)) {
+
+			SK_PNMI_CHECKFLAGS("SkPnmiEvent: On return");
+			return (0);
+		}
+
+		/*
+		 * Check the overflow status register and increment
+		 * the upper dword of corresponding counter.
+		 */
+		for (CounterIndex = 0; CounterIndex < sizeof(Mask) * 8;
+			CounterIndex ++) {
+
+			Mask = (SK_U64)1 << CounterIndex;
+			if ((OverflowStatus & Mask) == 0) {
+
+				continue;
+			}
+
+			switch (StatOvrflwBit[CounterIndex][MacType]) {
+
+			case SK_PNMI_HTX_UTILUNDER:
+			case SK_PNMI_HTX_UTILOVER:
+				if (MacType == SK_MAC_XMAC) {
+					XM_IN16(IoC, PhysPortIndex, XM_TX_CMD, &Register);
+					Register |= XM_TX_SAM_LINE;
+					XM_OUT16(IoC, PhysPortIndex, XM_TX_CMD, Register);
+				}
+				break;
+
+			case SK_PNMI_HRX_UTILUNDER:
+			case SK_PNMI_HRX_UTILOVER:
+				if (MacType == SK_MAC_XMAC) {
+					XM_IN16(IoC, PhysPortIndex, XM_RX_CMD, &Register);
+					Register |= XM_RX_SAM_LINE;
+					XM_OUT16(IoC, PhysPortIndex, XM_RX_CMD, Register);
+				}
+				break;
+
+			case SK_PNMI_HTX_OCTETHIGH:
+			case SK_PNMI_HTX_OCTETLOW:
+			case SK_PNMI_HTX_RESERVED:
+			case SK_PNMI_HRX_OCTETHIGH:
+			case SK_PNMI_HRX_OCTETLOW:
+			case SK_PNMI_HRX_IRLENGTH:
+			case SK_PNMI_HRX_RESERVED:
+			
+			/*
+			 * the following counters aren't be handled (id > 63)
+			 */
+			case SK_PNMI_HTX_SYNC:
+			case SK_PNMI_HTX_SYNC_OCTET:
+				break;
+
+			case SK_PNMI_HRX_LONGFRAMES:
+				if (MacType == SK_MAC_GMAC) {
+					pAC->Pnmi.Port[PhysPortIndex].
+						CounterHigh[CounterIndex] ++;
+				}
+				break;
+
+			default:
+				pAC->Pnmi.Port[PhysPortIndex].
+					CounterHigh[CounterIndex] ++;
+			}
+		}
+		break;
+
+	case SK_PNMI_EVT_SEN_WAR_LOW:
+#ifdef DEBUG
+		if ((unsigned int)Param.Para64 >= (unsigned int)pAC->I2c.MaxSens) {
+
+			SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL,
+				("PNMI: ERR: SkPnmiEvent: SK_PNMI_EVT_SEN_WAR_LOW parameter wrong, SensorIndex=%d\n",
+				(unsigned int)Param.Para64));
+			return (0);
+		}
+#endif /* DEBUG */
+
+		/*
+		 * Store a trap message in the trap buffer and generate
+		 * an event for user space applications with the
+		 * SK_DRIVER_SENDEVENT macro.
+		 */
+		QueueSensorTrap(pAC, OID_SKGE_TRAP_SEN_WAR_LOW,
+			(unsigned int)Param.Para64);
+		(void)SK_DRIVER_SENDEVENT(pAC, IoC);
+		break;
+
+	case SK_PNMI_EVT_SEN_WAR_UPP:
+#ifdef DEBUG
+		if ((unsigned int)Param.Para64 >= (unsigned int)pAC->I2c.MaxSens) {
+
+			SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL,
+				("PNMI: ERR: SkPnmiEvent: SK_PNMI_EVT_SEN_WAR_UPP parameter wrong, SensorIndex=%d\n",
+				(unsigned int)Param.Para64));
+			return (0);
+		}
+#endif /* DEBUG */
+
+		/*
+		 * Store a trap message in the trap buffer and generate
+		 * an event for user space applications with the
+		 * SK_DRIVER_SENDEVENT macro.
+		 */
+		QueueSensorTrap(pAC, OID_SKGE_TRAP_SEN_WAR_UPP,
+			(unsigned int)Param.Para64);
+		(void)SK_DRIVER_SENDEVENT(pAC, IoC);
+		break;
+
+	case SK_PNMI_EVT_SEN_ERR_LOW:
+#ifdef DEBUG
+		if ((unsigned int)Param.Para64 >= (unsigned int)pAC->I2c.MaxSens) {
+
+			SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL,
+				("PNMI: ERR: SkPnmiEvent: SK_PNMI_EVT_SEN_ERR_LOW parameter wrong, SensorIndex=%d\n",
+				(unsigned int)Param.Para64));
+			return (0);
+		}
+#endif /* DEBUG */
+
+		/*
+		 * Store a trap message in the trap buffer and generate
+		 * an event for user space applications with the
+		 * SK_DRIVER_SENDEVENT macro.
+		 */
+		QueueSensorTrap(pAC, OID_SKGE_TRAP_SEN_ERR_LOW,
+			(unsigned int)Param.Para64);
+		(void)SK_DRIVER_SENDEVENT(pAC, IoC);
+		break;
+	
+	case SK_PNMI_EVT_SEN_ERR_UPP:
+#ifdef DEBUG
+		if ((unsigned int)Param.Para64 >= (unsigned int)pAC->I2c.MaxSens) {
+
+			SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL,
+				("PNMI: ERR: SkPnmiEvent: SK_PNMI_EVT_SEN_ERR_UPP parameter wrong, SensorIndex=%d\n",
+				(unsigned int)Param.Para64));
+			return (0);
+		}
+#endif /* DEBUG */
+
+		/*
+		 * Store a trap message in the trap buffer and generate
+		 * an event for user space applications with the
+		 * SK_DRIVER_SENDEVENT macro.
+		 */
+		QueueSensorTrap(pAC, OID_SKGE_TRAP_SEN_ERR_UPP,
+			(unsigned int)Param.Para64);
+		(void)SK_DRIVER_SENDEVENT(pAC, IoC);
+		break;
+
+	case SK_PNMI_EVT_CHG_EST_TIMER:
+		/*
+		 * Calculate port switch average on a per hour basis
+		 *   Time interval for check       : 28125 ms
+		 *   Number of values for average  : 8
+		 *
+		 * Be careful in changing these values, on change check
+		 *   - typedef of SK_PNMI_ESTIMATE (Size of EstValue
+		 *     array one less than value number)
+		 *   - Timer initialization SkTimerStart() in SkPnmiInit
+		 *   - Delta value below must be multiplicated with
+		 *     power of 2
+		 *
+		 */
+		pEst = &pAC->Pnmi.RlmtChangeEstimate;
+		CounterIndex = pEst->EstValueIndex + 1;
+		if (CounterIndex == 7) {
+
+			CounterIndex = 0;
+		}
+		pEst->EstValueIndex = CounterIndex;
+
+		NewestValue = pAC->Pnmi.RlmtChangeCts;
+		OldestValue = pEst->EstValue[CounterIndex];
+		pEst->EstValue[CounterIndex] = NewestValue;
+
+		/*
+		 * Calculate average. Delta stores the number of
+		 * port switches per 28125 * 8 = 225000 ms
+		 */
+		if (NewestValue >= OldestValue) {
+
+			Delta = NewestValue - OldestValue;
+		}
+		else {
+			/* Overflow situation */
+			Delta = (SK_U64)(0 - OldestValue) + NewestValue;
+		}
+
+		/*
+		 * Extrapolate delta to port switches per hour.
+		 *     Estimate = Delta * (3600000 / 225000)
+		 *              = Delta * 16
+		 *              = Delta << 4
+		 */
+		pAC->Pnmi.RlmtChangeEstimate.Estimate = Delta << 4;
+
+		/*
+		 * Check if threshold is exceeded. If the threshold is
+		 * permanently exceeded every 28125 ms an event will be
+		 * generated to remind the user of this condition.
+		 */
+		if ((pAC->Pnmi.RlmtChangeThreshold != 0) &&
+			(pAC->Pnmi.RlmtChangeEstimate.Estimate >=
+			pAC->Pnmi.RlmtChangeThreshold)) {
+
+			QueueSimpleTrap(pAC, OID_SKGE_TRAP_RLMT_CHANGE_THRES);
+			(void)SK_DRIVER_SENDEVENT(pAC, IoC);
+		}
+
+		SK_MEMSET((char *)&EventParam, 0, sizeof(EventParam));
+		SkTimerStart(pAC, IoC, &pAC->Pnmi.RlmtChangeEstimate.EstTimer,
+			28125000, SKGE_PNMI, SK_PNMI_EVT_CHG_EST_TIMER,
+			EventParam);
+		break;
+
+	case SK_PNMI_EVT_CLEAR_COUNTER:
+		/*
+		 *  Param.Para32[0] contains the NetIndex (0 ..1).
+		 *  Param.Para32[1] is reserved, contains -1.
+		 */
+		NetIndex = (SK_U32)Param.Para32[0];
+
+#ifdef DEBUG
+		if (NetIndex >= pAC->Rlmt.NumNets) {
+
+			SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL,
+				("PNMI: ERR: SkPnmiEvent: SK_PNMI_EVT_CLEAR_COUNTER parameter wrong, NetIndex=%d\n",
+				NetIndex));
+
+			return (0);
+		}
+#endif /* DEBUG */
+
+		/*
+		 * Set all counters and timestamps to zero.
+		 * The according NetIndex is required as a
+		 * parameter of the event.
+		 */
+		ResetCounter(pAC, IoC, NetIndex);
+		break;
+
+	case SK_PNMI_EVT_XMAC_RESET:
+		/*
+		 * To grant continuous counter values store the current
+		 * XMAC statistic values to the entries 1..n of the
+		 * CounterOffset array. XMAC Errata #2
+		 */
+#ifdef DEBUG
+		if ((unsigned int)Param.Para64 >= SK_MAX_MACS) {
+
+			SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL,
+				("PNMI: ERR: SkPnmiEvent: SK_PNMI_EVT_XMAC_RESET parameter wrong, PhysPortIndex=%d\n",
+				(unsigned int)Param.Para64));
+			return (0);
+		}
+#endif
+		PhysPortIndex = (unsigned int)Param.Para64;
+
+		/*
+		 * Update XMAC statistic to get fresh values
+		 */
+		Ret = MacUpdate(pAC, IoC, 0, pAC->GIni.GIMacsFound - 1);
+		if (Ret != SK_PNMI_ERR_OK) {
+
+			SK_PNMI_CHECKFLAGS("SkPnmiEvent: On return");
+			return (0);
+		}
+		/*
+		 * Increment semaphore to indicate that an update was
+		 * already done
+		 */
+		pAC->Pnmi.MacUpdatedFlag ++;
+
+		for (CounterIndex = 0; CounterIndex < SK_PNMI_MAX_IDX;
+			CounterIndex ++) {
+
+			if (!StatAddr[CounterIndex][MacType].GetOffset) {
+
+				continue;
+			}
+
+			pAC->Pnmi.Port[PhysPortIndex].CounterOffset[CounterIndex] =
+				GetPhysStatVal(pAC, IoC, PhysPortIndex, CounterIndex);
+			
+			pAC->Pnmi.Port[PhysPortIndex].CounterHigh[CounterIndex] = 0;
+		}
+
+		pAC->Pnmi.MacUpdatedFlag --;
+		break;
+
+	case SK_PNMI_EVT_RLMT_PORT_UP:
+		PhysPortIndex = (unsigned int)Param.Para32[0];
+#ifdef DEBUG
+		if (PhysPortIndex >= SK_MAX_MACS) {
+
+			SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL,
+				("PNMI: ERR: SkPnmiEvent: SK_PNMI_EVT_RLMT_PORT_UP parameter"
+                 " wrong, PhysPortIndex=%d\n", PhysPortIndex));
+
+			return (0);
+		}
+#endif /* DEBUG */
+
+		/*
+		 * Store a trap message in the trap buffer and generate an event for
+		 * user space applications with the SK_DRIVER_SENDEVENT macro.
+		 */
+		QueueRlmtPortTrap(pAC, OID_SKGE_TRAP_RLMT_PORT_UP, PhysPortIndex);
+		(void)SK_DRIVER_SENDEVENT(pAC, IoC);
+
+		/* Bugfix for XMAC errata (#10620)*/
+		if (MacType == SK_MAC_XMAC) {
+			/* Add incremental difference to offset (#10620)*/
+			(void)pAC->GIni.GIFunc.pFnMacStatistic(pAC, IoC, PhysPortIndex,
+				XM_RXE_SHT_ERR, &Val32);
+			
+			Value = (((SK_U64)pAC->Pnmi.Port[PhysPortIndex].
+				 CounterHigh[SK_PNMI_HRX_SHORTS] << 32) | (SK_U64)Val32);
+			pAC->Pnmi.Port[PhysPortIndex].CounterOffset[SK_PNMI_HRX_SHORTS] +=
+				Value - pAC->Pnmi.Port[PhysPortIndex].RxShortZeroMark;
+		}
+		
+		/* Tell VctStatus() that a link was up meanwhile. */
+		pAC->Pnmi.VctStatus[PhysPortIndex] |= SK_PNMI_VCT_LINK;		
+		break;
+
+    case SK_PNMI_EVT_RLMT_PORT_DOWN:
+		PhysPortIndex = (unsigned int)Param.Para32[0];
+
+#ifdef DEBUG
+		if (PhysPortIndex >= SK_MAX_MACS) {
+
+			SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL,
+				("PNMI: ERR: SkPnmiEvent: SK_PNMI_EVT_RLMT_PORT_DOWN parameter"
+                 " wrong, PhysPortIndex=%d\n", PhysPortIndex));
+
+			return (0);
+		}
+#endif /* DEBUG */
+
+		/*
+		 * Store a trap message in the trap buffer and generate an event for
+		 * user space applications with the SK_DRIVER_SENDEVENT macro.
+		 */
+		QueueRlmtPortTrap(pAC, OID_SKGE_TRAP_RLMT_PORT_DOWN, PhysPortIndex);
+		(void)SK_DRIVER_SENDEVENT(pAC, IoC);
+
+		/* Bugfix #10620 - get zero level for incremental difference */
+		if (MacType == SK_MAC_XMAC) {
+
+			(void)pAC->GIni.GIFunc.pFnMacStatistic(pAC, IoC, PhysPortIndex,
+				XM_RXE_SHT_ERR, &Val32);
+			
+			pAC->Pnmi.Port[PhysPortIndex].RxShortZeroMark =
+				(((SK_U64)pAC->Pnmi.Port[PhysPortIndex].
+				 CounterHigh[SK_PNMI_HRX_SHORTS] << 32) | (SK_U64)Val32);
+		}
+		break;
+
+	case SK_PNMI_EVT_RLMT_ACTIVE_DOWN:
+		PhysPortIndex = (unsigned int)Param.Para32[0];
+		NetIndex = (SK_U32)Param.Para32[1];
+
+#ifdef DEBUG
+		if (PhysPortIndex >= SK_MAX_MACS) {
+
+			SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL,
+				("PNMI: ERR: SkPnmiEvent: SK_PNMI_EVT_RLMT_ACTIVE_DOWN parameter too high, PhysPort=%d\n",
+				PhysPortIndex));
+		}
+
+		if (NetIndex >= pAC->Rlmt.NumNets) {
+
+			SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL,
+				("PNMI: ERR: SkPnmiEvent: SK_PNMI_EVT_RLMT_ACTIVE_DOWN parameter too high, NetIndex=%d\n",
+				NetIndex));
+		}
+#endif /* DEBUG */
+
+		/*
+		 * For now, ignore event if NetIndex != 0.
+		 */
+		if (Param.Para32[1] != 0) {
+
+			return (0);
+		}
+
+		/*
+		 * Nothing to do if port is already inactive
+		 */
+		if (!pAC->Pnmi.Port[PhysPortIndex].ActiveFlag) {
+
+			return (0);
+		}
+
+		/*
+		 * Update statistic counters to calculate new offset for the virtual
+		 * port and increment semaphore to indicate that an update was already
+		 * done.
+		 */
+		if (MacUpdate(pAC, IoC, 0, pAC->GIni.GIMacsFound - 1) !=
+			SK_PNMI_ERR_OK) {
+
+			SK_PNMI_CHECKFLAGS("SkPnmiEvent: On return");
+			return (0);
+		}
+		pAC->Pnmi.MacUpdatedFlag ++;
+
+		/*
+		 * Calculate new counter offset for virtual port to grant continous
+		 * counting on port switches. The virtual port consists of all currently
+		 * active ports. The port down event indicates that a port is removed
+		 * from the virtual port. Therefore add the counter value of the removed
+		 * port to the CounterOffset for the virtual port to grant the same
+		 * counter value.
+		 */
+		for (CounterIndex = 0; CounterIndex < SK_PNMI_MAX_IDX;
+			CounterIndex ++) {
+
+			if (!StatAddr[CounterIndex][MacType].GetOffset) {
+
+				continue;
+			}
+
+			Value = GetPhysStatVal(pAC, IoC, PhysPortIndex, CounterIndex);
+
+			pAC->Pnmi.VirtualCounterOffset[CounterIndex] += Value;
+		}
+
+		/*
+		 * Set port to inactive
+		 */
+		pAC->Pnmi.Port[PhysPortIndex].ActiveFlag = SK_FALSE;
+
+		pAC->Pnmi.MacUpdatedFlag --;
+		break;
+
+	case SK_PNMI_EVT_RLMT_ACTIVE_UP:
+		PhysPortIndex = (unsigned int)Param.Para32[0];
+		NetIndex = (SK_U32)Param.Para32[1];
+
+#ifdef DEBUG
+		if (PhysPortIndex >= SK_MAX_MACS) {
+
+			SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL,
+				("PNMI: ERR: SkPnmiEvent: SK_PNMI_EVT_RLMT_ACTIVE_UP parameter too high, PhysPort=%d\n",
+				PhysPortIndex));
+		}
+
+		if (NetIndex >= pAC->Rlmt.NumNets) {
+
+			SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL,
+				("PNMI: ERR: SkPnmiEvent: SK_PNMI_EVT_RLMT_ACTIVE_UP parameter too high, NetIndex=%d\n",
+				NetIndex));
+		}
+#endif /* DEBUG */
+
+		/*
+		 * For now, ignore event if NetIndex != 0.
+		 */
+		if (Param.Para32[1] != 0) {
+
+			return (0);
+		}
+
+		/*
+		 * Nothing to do if port is already active
+		 */
+		if (pAC->Pnmi.Port[PhysPortIndex].ActiveFlag) {
+
+			return (0);
+		}
+
+		/*
+		 * Statistic maintenance
+		 */
+		pAC->Pnmi.RlmtChangeCts ++;
+		pAC->Pnmi.RlmtChangeTime = SK_PNMI_HUNDREDS_SEC(SkOsGetTime(pAC));
+
+		/*
+		 * Store a trap message in the trap buffer and generate an event for
+		 * user space applications with the SK_DRIVER_SENDEVENT macro.
+		 */
+		QueueRlmtNewMacTrap(pAC, PhysPortIndex);
+		(void)SK_DRIVER_SENDEVENT(pAC, IoC);
+
+		/*
+		 * Update statistic counters to calculate new offset for the virtual
+		 * port and increment semaphore to indicate that an update was
+		 * already done.
+		 */
+		if (MacUpdate(pAC, IoC, 0, pAC->GIni.GIMacsFound - 1) !=
+			SK_PNMI_ERR_OK) {
+
+			SK_PNMI_CHECKFLAGS("SkPnmiEvent: On return");
+			return (0);
+		}
+		pAC->Pnmi.MacUpdatedFlag ++;
+
+		/*
+		 * Calculate new counter offset for virtual port to grant continous
+		 * counting on port switches. A new port is added to the virtual port.
+		 * Therefore substract the counter value of the new port from the
+		 * CounterOffset for the virtual port to grant the same value.
+		 */
+		for (CounterIndex = 0; CounterIndex < SK_PNMI_MAX_IDX;
+			CounterIndex ++) {
+
+			if (!StatAddr[CounterIndex][MacType].GetOffset) {
+
+				continue;
+			}
+
+			Value = GetPhysStatVal(pAC, IoC, PhysPortIndex, CounterIndex);
+
+			pAC->Pnmi.VirtualCounterOffset[CounterIndex] -= Value;
+		}
+
+		/* Set port to active */
+		pAC->Pnmi.Port[PhysPortIndex].ActiveFlag = SK_TRUE;
+
+		pAC->Pnmi.MacUpdatedFlag --;
+		break;
+
+	case SK_PNMI_EVT_RLMT_SEGMENTATION:
+		/*
+		 * Para.Para32[0] contains the NetIndex.
+		 */
+
+		/*
+		 * Store a trap message in the trap buffer and generate an event for
+		 * user space applications with the SK_DRIVER_SENDEVENT macro.
+		 */
+		QueueSimpleTrap(pAC, OID_SKGE_TRAP_RLMT_SEGMENTATION);
+		(void)SK_DRIVER_SENDEVENT(pAC, IoC);
+		break;
+
+    case SK_PNMI_EVT_RLMT_SET_NETS:
+		/*
+		 *  Param.Para32[0] contains the number of Nets.
+		 *  Param.Para32[1] is reserved, contains -1.
+		 */
+	    /*
+    	 * Check number of nets
+		 */
+		MaxNetNumber = pAC->GIni.GIMacsFound;
+		if (((unsigned int)Param.Para32[0] < 1)
+			|| ((unsigned int)Param.Para32[0] > MaxNetNumber)) {
+			return (SK_PNMI_ERR_UNKNOWN_NET);
+		}
+
+        if ((unsigned int)Param.Para32[0] == 1) { /* single net mode */
+        	pAC->Pnmi.DualNetActiveFlag = SK_FALSE;
+        }
+        else { /* dual net mode */
+        	pAC->Pnmi.DualNetActiveFlag = SK_TRUE;
+        }
+        break;
+
+    case SK_PNMI_EVT_VCT_RESET:
+		PhysPortIndex = Param.Para32[0];
+		pPrt = &pAC->GIni.GP[PhysPortIndex];
+		pVctBackupData = &pAC->Pnmi.VctBackup[PhysPortIndex];
+		
+		if (pAC->Pnmi.VctStatus[PhysPortIndex] & SK_PNMI_VCT_PENDING) {
+			RetCode = SkGmCableDiagStatus(pAC, IoC, PhysPortIndex, SK_FALSE);
+			if (RetCode == 2) {
+				/*
+				 * VCT test is still running.
+				 * Start VCT timer counter again.
+				 */
+				SK_MEMSET((char *) &Param, 0, sizeof(Param));
+				Param.Para32[0] = PhysPortIndex;
+				Param.Para32[1] = -1;
+				SkTimerStart(pAC, IoC,
+					&pAC->Pnmi.VctTimeout[PhysPortIndex].VctTimer,
+				4000000, SKGE_PNMI, SK_PNMI_EVT_VCT_RESET, Param);
+				break;
+			}
+			pAC->Pnmi.VctStatus[PhysPortIndex] &= ~SK_PNMI_VCT_PENDING;
+			pAC->Pnmi.VctStatus[PhysPortIndex] |=
+				(SK_PNMI_VCT_NEW_VCT_DATA | SK_PNMI_VCT_TEST_DONE);
+			
+			/* Copy results for later use to PNMI struct. */
+			for (i = 0; i < 4; i++)  {
+				if (pPrt->PMdiPairSts[i] == SK_PNMI_VCT_NORMAL_CABLE) {
+					if ((pPrt->PMdiPairLen[i] > 35) &&
+						(pPrt->PMdiPairLen[i] < 0xff)) {
+						pPrt->PMdiPairSts[i] = SK_PNMI_VCT_IMPEDANCE_MISMATCH;
+					}
+				}
+				if ((pPrt->PMdiPairLen[i] > 35) &&
+					(pPrt->PMdiPairLen[i] != 0xff)) {
+					CableLength = 1000 *
+						(((175 * pPrt->PMdiPairLen[i]) / 210) - 28);
+				}
+				else {
+					CableLength = 0;
+				}
+				pVctBackupData->PMdiPairLen[i] = CableLength;
+				pVctBackupData->PMdiPairSts[i] = pPrt->PMdiPairSts[i];
+			}
+			
+			Param.Para32[0] = PhysPortIndex;
+			Param.Para32[1] = -1;
+			SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_RESET, Param);
+			SkEventDispatcher(pAC, IoC);
+		}
+		
+		break;
+
+	default:
+		break;
+	}
+
+	SK_PNMI_CHECKFLAGS("SkPnmiEvent: On return");
+	return (0);
+}
+
+
+/******************************************************************************
+ *
+ * Private functions
+ *
+ */
+
+/*****************************************************************************
+ *
+ * PnmiVar - Gets, presets, and sets single OIDs
+ *
+ * Description:
+ *	Looks up the requested OID, calls the corresponding handler
+ *	function, and passes the parameters with the get, preset, or
+ *	set command. The function is called by SkGePnmiGetVar,
+ *	SkGePnmiPreSetVar, or SkGePnmiSetVar.
+ *
+ * Returns:
+ *	SK_PNMI_ERR_XXX. For details have a look at the description of the
+ *	calling functions.
+ *	SK_PNMI_ERR_UNKNOWN_NET  The requested NetIndex doesn't exist
+ */
+PNMI_STATIC int PnmiVar(
+SK_AC *pAC,		/* Pointer to adapter context */
+SK_IOC IoC,		/* IO context handle */
+int Action,		/* GET/PRESET/SET action */
+SK_U32 Id,		/* Object ID that is to be processed */
+char *pBuf,		/* Buffer used for the management data transfer */
+unsigned int *pLen,	/* Total length of pBuf management data  */
+SK_U32 Instance,	/* Instance (1..n) that is to be set or -1 */
+SK_U32 NetIndex)	/* NetIndex (0..n), in single net mode always zero */
+{
+	unsigned int	TableIndex;
+	int		Ret;
+
+
+	if ((TableIndex = LookupId(Id)) == (unsigned int)(-1)) {
+
+		*pLen = 0;
+		return (SK_PNMI_ERR_UNKNOWN_OID);
+	}
+	
+    /* Check NetIndex */
+	if (NetIndex >= pAC->Rlmt.NumNets) {
+		return (SK_PNMI_ERR_UNKNOWN_NET);
+	}
+
+	SK_PNMI_CHECKFLAGS("PnmiVar: On call");
+
+	Ret = IdTable[TableIndex].Func(pAC, IoC, Action, Id, pBuf, pLen,
+		Instance, TableIndex, NetIndex);
+
+	SK_PNMI_CHECKFLAGS("PnmiVar: On return");
+
+	return (Ret);
+}
+
+/*****************************************************************************
+ *
+ * PnmiStruct - Presets and Sets data in structure SK_PNMI_STRUCT_DATA
+ *
+ * Description:
+ *	The return value of the function will also be stored in
+ *	SK_PNMI_STRUCT_DATA if the passed buffer has the minimum size of
+ *	SK_PNMI_MIN_STRUCT_SIZE. The sub-function runs through the IdTable,
+ *	checks which OIDs are able to set, and calls the handler function of
+ *	the OID to perform the set. The return value of the function will
+ *	also be stored in SK_PNMI_STRUCT_DATA if the passed buffer has the
+ *	minimum size of SK_PNMI_MIN_STRUCT_SIZE. The function is called
+ *	by SkGePnmiPreSetStruct and SkGePnmiSetStruct.
+ *
+ * Returns:
+ *	SK_PNMI_ERR_XXX. The codes are described in the calling functions.
+ *	SK_PNMI_ERR_UNKNOWN_NET  The requested NetIndex doesn't exist
+ */
+PNMI_STATIC int PnmiStruct(
+SK_AC *pAC,		/* Pointer to adapter context */
+SK_IOC IoC,		/* IO context handle */
+int  Action,	/* PRESET/SET action to be performed */
+char *pBuf,		/* Buffer used for the management data transfer */
+unsigned int *pLen,	/* Length of pBuf management data buffer */
+SK_U32 NetIndex)	/* NetIndex (0..n), in single net mode always zero */
+{
+	int		Ret;
+	unsigned int	TableIndex;
+	unsigned int	DstOffset;
+	unsigned int	Len;
+	unsigned int	InstanceNo;
+	unsigned int	InstanceCnt;
+	SK_U32		Instance;
+	SK_U32		Id;
+
+
+	/* Check if the passed buffer has the right size */
+	if (*pLen < SK_PNMI_STRUCT_SIZE) {
+
+		/* Check if we can return the error within the buffer */
+		if (*pLen >= SK_PNMI_MIN_STRUCT_SIZE) {
+
+			SK_PNMI_SET_STAT(pBuf, SK_PNMI_ERR_TOO_SHORT,
+				(SK_U32)(-1));
+		}
+
+		*pLen = SK_PNMI_STRUCT_SIZE;
+		return (SK_PNMI_ERR_TOO_SHORT);
+	}
+	
+    /* Check NetIndex */
+	if (NetIndex >= pAC->Rlmt.NumNets) {
+		return (SK_PNMI_ERR_UNKNOWN_NET);
+	}
+	
+	SK_PNMI_CHECKFLAGS("PnmiStruct: On call");
+
+	/*
+	 * Update the values of RLMT and SIRQ and increment semaphores to
+	 * indicate that an update was already done.
+	 */
+	if ((Ret = RlmtUpdate(pAC, IoC, NetIndex)) != SK_PNMI_ERR_OK) {
+
+		SK_PNMI_SET_STAT(pBuf, Ret, (SK_U32)(-1));
+		*pLen = SK_PNMI_MIN_STRUCT_SIZE;
+		return (Ret);
+	}
+
+	if ((Ret = SirqUpdate(pAC, IoC)) != SK_PNMI_ERR_OK) {
+
+		SK_PNMI_SET_STAT(pBuf, Ret, (SK_U32)(-1));
+		*pLen = SK_PNMI_MIN_STRUCT_SIZE;
+		return (Ret);
+	}
+
+	pAC->Pnmi.RlmtUpdatedFlag ++;
+	pAC->Pnmi.SirqUpdatedFlag ++;
+
+	/* Preset/Set values */
+	for (TableIndex = 0; TableIndex < ID_TABLE_SIZE; TableIndex ++) {
+
+		if ((IdTable[TableIndex].Access != SK_PNMI_RW) &&
+			(IdTable[TableIndex].Access != SK_PNMI_WO)) {
+
+			continue;
+		}
+
+		InstanceNo = IdTable[TableIndex].InstanceNo;
+		Id = IdTable[TableIndex].Id;
+
+		for (InstanceCnt = 1; InstanceCnt <= InstanceNo;
+			InstanceCnt ++) {
+
+			DstOffset = IdTable[TableIndex].Offset +
+				(InstanceCnt - 1) *
+				IdTable[TableIndex].StructSize;
+
+			/*
+			 * Because VPD multiple instance variables are
+			 * not setable we do not need to evaluate VPD
+			 * instances. Have a look to VPD instance
+			 * calculation in SkPnmiGetStruct().
+			 */
+			Instance = (SK_U32)InstanceCnt;
+
+			/*
+			 * Evaluate needed buffer length
+			 */
+			Len = 0;
+			Ret = IdTable[TableIndex].Func(pAC, IoC,
+				SK_PNMI_GET, IdTable[TableIndex].Id,
+				NULL, &Len, Instance, TableIndex, NetIndex);
+
+			if (Ret == SK_PNMI_ERR_UNKNOWN_INST) {
+
+				break;
+			}
+			if (Ret != SK_PNMI_ERR_TOO_SHORT) {
+
+				pAC->Pnmi.RlmtUpdatedFlag --;
+				pAC->Pnmi.SirqUpdatedFlag --;
+
+				SK_PNMI_CHECKFLAGS("PnmiStruct: On return");
+				SK_PNMI_SET_STAT(pBuf,
+					SK_PNMI_ERR_GENERAL, DstOffset);
+				*pLen = SK_PNMI_MIN_STRUCT_SIZE;
+				return (SK_PNMI_ERR_GENERAL);
+			}
+			if (Id == OID_SKGE_VPD_ACTION) {
+
+				switch (*(pBuf + DstOffset)) {
+
+				case SK_PNMI_VPD_CREATE:
+					Len = 3 + *(pBuf + DstOffset + 3);
+					break;
+
+				case SK_PNMI_VPD_DELETE:
+					Len = 3;
+					break;
+
+				default:
+					Len = 1;
+					break;
+				}
+			}
+
+			/* Call the OID handler function */
+			Ret = IdTable[TableIndex].Func(pAC, IoC, Action,
+				IdTable[TableIndex].Id, pBuf + DstOffset,
+				&Len, Instance, TableIndex, NetIndex);
+
+			if (Ret != SK_PNMI_ERR_OK) {
+
+				pAC->Pnmi.RlmtUpdatedFlag --;
+				pAC->Pnmi.SirqUpdatedFlag --;
+
+				SK_PNMI_CHECKFLAGS("PnmiStruct: On return");
+				SK_PNMI_SET_STAT(pBuf, SK_PNMI_ERR_BAD_VALUE,
+					DstOffset);
+				*pLen = SK_PNMI_MIN_STRUCT_SIZE;
+				return (SK_PNMI_ERR_BAD_VALUE);
+			}
+		}
+	}
+
+	pAC->Pnmi.RlmtUpdatedFlag --;
+	pAC->Pnmi.SirqUpdatedFlag --;
+
+	SK_PNMI_CHECKFLAGS("PnmiStruct: On return");
+	SK_PNMI_SET_STAT(pBuf, SK_PNMI_ERR_OK, (SK_U32)(-1));
+	return (SK_PNMI_ERR_OK);
+}
+
+/*****************************************************************************
+ *
+ * LookupId - Lookup an OID in the IdTable
+ *
+ * Description:
+ *	Scans the IdTable to find the table entry of an OID.
+ *
+ * Returns:
+ *	The table index or -1 if not found.
+ */
+PNMI_STATIC int LookupId(
+SK_U32 Id)		/* Object identifier to be searched */
+{
+	int i;
+
+	for (i = 0; i < ID_TABLE_SIZE; i++) {
+
+		if (IdTable[i].Id == Id) {
+
+			return i;
+		}
+	}
+
+	return (-1);
+}
+
+/*****************************************************************************
+ *
+ * OidStruct - Handler of OID_SKGE_ALL_DATA
+ *
+ * Description:
+ *	This OID performs a Get/Preset/SetStruct call and returns all data
+ *	in a SK_PNMI_STRUCT_DATA structure.
+ *
+ * Returns:
+ *	SK_PNMI_ERR_OK           The request was successfully performed.
+ *	SK_PNMI_ERR_GENERAL      A general severe internal error occured.
+ *	SK_PNMI_ERR_TOO_SHORT    The passed buffer is too short to contain
+ *	                         the correct data (e.g. a 32bit value is
+ *	                         needed, but a 16 bit value was passed).
+ *	SK_PNMI_ERR_BAD_VALUE    The passed value is not in the valid
+ *	                         value range.
+ *	SK_PNMI_ERR_READ_ONLY    The OID is read-only and cannot be set.
+ *	SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't
+ *                           exist (e.g. port instance 3 on a two port
+ *	                         adapter.
+ */
+PNMI_STATIC int OidStruct(
+SK_AC *pAC,		/* Pointer to adapter context */
+SK_IOC IoC,		/* IO context handle */
+int Action,		/* GET/PRESET/SET action */
+SK_U32 Id,		/* Object ID that is to be processed */
+char *pBuf,		/* Buffer used for the management data transfer */
+unsigned int *pLen,	/* On call: pBuf buffer length. On return: used buffer */
+SK_U32 Instance,	/* Instance (1..n) that is to be queried or -1 */
+unsigned int TableIndex, /* Index to the Id table */
+SK_U32 NetIndex)	/* NetIndex (0..n), in single net mode always zero */
+{
+	if (Id != OID_SKGE_ALL_DATA) {
+
+		SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR003,
+			SK_PNMI_ERR003MSG);
+
+		*pLen = 0;
+		return (SK_PNMI_ERR_GENERAL);
+	}
+
+	/*
+	 * Check instance. We only handle single instance variables
+	 */
+	if (Instance != (SK_U32)(-1) && Instance != 1) {
+
+		*pLen = 0;
+		return (SK_PNMI_ERR_UNKNOWN_INST);
+	}
+
+	switch (Action) {
+
+	case SK_PNMI_GET:
+		return (SkPnmiGetStruct(pAC, IoC, pBuf, pLen, NetIndex));
+
+	case SK_PNMI_PRESET:
+		return (SkPnmiPreSetStruct(pAC, IoC, pBuf, pLen, NetIndex));
+
+	case SK_PNMI_SET:
+		return (SkPnmiSetStruct(pAC, IoC, pBuf, pLen, NetIndex));
+	}
+
+	SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR004, SK_PNMI_ERR004MSG);
+
+	*pLen = 0;
+	return (SK_PNMI_ERR_GENERAL);
+}
+
+/*****************************************************************************
+ *
+ * Perform - OID handler of OID_SKGE_ACTION
+ *
+ * Description:
+ *	None.
+ *
+ * Returns:
+ *	SK_PNMI_ERR_OK           The request was successfully performed.
+ *	SK_PNMI_ERR_GENERAL      A general severe internal error occured.
+ *	SK_PNMI_ERR_TOO_SHORT    The passed buffer is too short to contain
+ *	                         the correct data (e.g. a 32bit value is
+ *	                         needed, but a 16 bit value was passed).
+ *	SK_PNMI_ERR_BAD_VALUE    The passed value is not in the valid
+ *	                         value range.
+ *	SK_PNMI_ERR_READ_ONLY    The OID is read-only and cannot be set.
+ *	SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't
+ *                           exist (e.g. port instance 3 on a two port
+ *	                         adapter.
+ */
+PNMI_STATIC int Perform(
+SK_AC *pAC,		/* Pointer to adapter context */
+SK_IOC IoC,		/* IO context handle */
+int Action,		/* GET/PRESET/SET action */
+SK_U32 Id,		/* Object ID that is to be processed */
+char *pBuf,		/* Buffer used for the management data transfer */
+unsigned int *pLen,	/* On call: pBuf buffer length. On return: used buffer */
+SK_U32 Instance,	/* Instance (1..n) that is to be queried or -1 */
+unsigned int TableIndex, /* Index to the Id table */
+SK_U32 NetIndex)	/* NetIndex (0..n), in single net mode always zero */
+{
+	int	Ret;
+	SK_U32	ActionOp;
+
+
+	/*
+	 * Check instance. We only handle single instance variables
+	 */
+	if (Instance != (SK_U32)(-1) && Instance != 1) {
+
+		*pLen = 0;
+		return (SK_PNMI_ERR_UNKNOWN_INST);
+	}
+
+	if (*pLen < sizeof(SK_U32)) {
+
+		*pLen = sizeof(SK_U32);
+		return (SK_PNMI_ERR_TOO_SHORT);
+	}
+
+	/* Check if a get should be performed */
+	if (Action == SK_PNMI_GET) {
+
+		/* A get is easy. We always return the same value */
+		ActionOp = (SK_U32)SK_PNMI_ACT_IDLE;
+		SK_PNMI_STORE_U32(pBuf, ActionOp);
+		*pLen = sizeof(SK_U32);
+
+		return (SK_PNMI_ERR_OK);
+	}
+
+	/* Continue with PRESET/SET action */
+	if (*pLen > sizeof(SK_U32)) {
+
+		return (SK_PNMI_ERR_BAD_VALUE);
+	}
+
+	/* Check if the command is a known one */
+	SK_PNMI_READ_U32(pBuf, ActionOp);
+	if (*pLen > sizeof(SK_U32) ||
+		(ActionOp != SK_PNMI_ACT_IDLE &&
+		ActionOp != SK_PNMI_ACT_RESET &&
+		ActionOp != SK_PNMI_ACT_SELFTEST &&
+		ActionOp != SK_PNMI_ACT_RESETCNT)) {
+
+		*pLen = 0;
+		return (SK_PNMI_ERR_BAD_VALUE);
+	}
+
+	/* A preset ends here */
+	if (Action == SK_PNMI_PRESET) {
+
+		return (SK_PNMI_ERR_OK);
+	}
+
+	switch (ActionOp) {
+
+	case SK_PNMI_ACT_IDLE:
+		/* Nothing to do */
+		break;
+
+	case SK_PNMI_ACT_RESET:
+		/*
+		 * Perform a driver reset or something that comes near
+		 * to this.
+		 */
+		Ret = SK_DRIVER_RESET(pAC, IoC);
+		if (Ret != 0) {
+
+			SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR005,
+				SK_PNMI_ERR005MSG);
+
+			return (SK_PNMI_ERR_GENERAL);
+		}
+		break;
+
+	case SK_PNMI_ACT_SELFTEST:
+		/*
+		 * Perform a driver selftest or something similar to this.
+		 * Currently this feature is not used and will probably
+		 * implemented in another way.
+		 */
+		Ret = SK_DRIVER_SELFTEST(pAC, IoC);
+		pAC->Pnmi.TestResult = Ret;
+		break;
+
+	case SK_PNMI_ACT_RESETCNT:
+		/* Set all counters and timestamps to zero */
+		ResetCounter(pAC, IoC, NetIndex);
+		break;
+
+	default:
+		SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR006,
+			SK_PNMI_ERR006MSG);
+
+		return (SK_PNMI_ERR_GENERAL);
+	}
+
+	return (SK_PNMI_ERR_OK);
+}
+
+/*****************************************************************************
+ *
+ * Mac8023Stat - OID handler of OID_GEN_XXX and OID_802_3_XXX
+ *
+ * Description:
+ *	Retrieves the statistic values of the virtual port (logical
+ *	index 0). Only special OIDs of NDIS are handled which consist
+ *	of a 32 bit instead of a 64 bit value. The OIDs are public
+ *	because perhaps some other platform can use them too.
+ *
+ * Returns:
+ *	SK_PNMI_ERR_OK           The request was successfully performed.
+ *	SK_PNMI_ERR_GENERAL      A general severe internal error occured.
+ *	SK_PNMI_ERR_TOO_SHORT    The passed buffer is too short to contain
+ *	                         the correct data (e.g. a 32bit value is
+ *	                         needed, but a 16 bit value was passed).
+ *	SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't
+ *                           exist (e.g. port instance 3 on a two port
+ *	                         adapter.
+ */
+PNMI_STATIC int Mac8023Stat(
+SK_AC *pAC,		/* Pointer to adapter context */
+SK_IOC IoC,		/* IO context handle */
+int Action,		/* GET/PRESET/SET action */
+SK_U32 Id,		/* Object ID that is to be processed */
+char *pBuf,		/* Buffer used for the management data transfer */
+unsigned int *pLen,	/* On call: pBuf buffer length. On return: used buffer */
+SK_U32 Instance,	/* Instance (1..n) that is to be queried or -1 */
+unsigned int TableIndex,	/* Index to the Id table */
+SK_U32 NetIndex)	/* NetIndex (0..n), in single net mode always zero */
+{
+	int     Ret;
+	SK_U64  StatVal;
+	SK_U32  StatVal32;
+	SK_BOOL Is64BitReq = SK_FALSE;
+
+	/*
+	 * Only the active Mac is returned
+	 */
+	if (Instance != (SK_U32)(-1) && Instance != 1) {
+
+		*pLen = 0;
+		return (SK_PNMI_ERR_UNKNOWN_INST);
+	}
+
+	/*
+	 * Check action type
+	 */
+	if (Action != SK_PNMI_GET) {
+
+		*pLen = 0;
+		return (SK_PNMI_ERR_READ_ONLY);
+	}
+
+	/* Check length */
+	switch (Id) {
+
+	case OID_802_3_PERMANENT_ADDRESS:
+	case OID_802_3_CURRENT_ADDRESS:
+		if (*pLen < sizeof(SK_MAC_ADDR)) {
+
+			*pLen = sizeof(SK_MAC_ADDR);
+			return (SK_PNMI_ERR_TOO_SHORT);
+		}
+		break;
+
+	default:
+#ifndef SK_NDIS_64BIT_CTR
+		if (*pLen < sizeof(SK_U32)) {
+			*pLen = sizeof(SK_U32);
+			return (SK_PNMI_ERR_TOO_SHORT);
+		}
+
+#else /* SK_NDIS_64BIT_CTR */
+
+		/* for compatibility, at least 32bit are required for OID */
+		if (*pLen < sizeof(SK_U32)) {
+			/*
+			* but indicate handling for 64bit values,
+			* if insufficient space is provided
+			*/
+			*pLen = sizeof(SK_U64);
+			return (SK_PNMI_ERR_TOO_SHORT);
+		}
+
+		Is64BitReq = (*pLen < sizeof(SK_U64)) ? SK_FALSE : SK_TRUE;
+#endif /* SK_NDIS_64BIT_CTR */
+		break;
+	}
+
+	/*
+	 * Update all statistics, because we retrieve virtual MAC, which
+	 * consists of multiple physical statistics and increment semaphore
+	 * to indicate that an update was already done.
+	 */
+	Ret = MacUpdate(pAC, IoC, 0, pAC->GIni.GIMacsFound - 1);
+	if ( Ret != SK_PNMI_ERR_OK) {
+
+		*pLen = 0;
+		return (Ret);
+	}
+	pAC->Pnmi.MacUpdatedFlag ++;
+
+	/*
+	 * Get value (MAC Index 0 identifies the virtual MAC)
+	 */
+	switch (Id) {
+
+	case OID_802_3_PERMANENT_ADDRESS:
+		CopyMac(pBuf, &pAC->Addr.Net[NetIndex].PermanentMacAddress);
+		*pLen = sizeof(SK_MAC_ADDR);
+		break;
+
+	case OID_802_3_CURRENT_ADDRESS:
+		CopyMac(pBuf, &pAC->Addr.Net[NetIndex].CurrentMacAddress);
+		*pLen = sizeof(SK_MAC_ADDR);
+		break;
+
+	default:
+		StatVal = GetStatVal(pAC, IoC, 0, IdTable[TableIndex].Param, NetIndex);
+
+		/* by default 32bit values are evaluated */
+		if (!Is64BitReq) {
+			StatVal32 = (SK_U32)StatVal;
+			SK_PNMI_STORE_U32(pBuf, StatVal32);
+			*pLen = sizeof(SK_U32);
+		}
+		else {
+			SK_PNMI_STORE_U64(pBuf, StatVal);
+			*pLen = sizeof(SK_U64);
+		}
+		break;
+	}
+
+	pAC->Pnmi.MacUpdatedFlag --;
+
+	return (SK_PNMI_ERR_OK);
+}
+
+/*****************************************************************************
+ *
+ * MacPrivateStat - OID handler function of OID_SKGE_STAT_XXX
+ *
+ * Description:
+ *	Retrieves the MAC statistic data.
+ *
+ * Returns:
+ *	SK_PNMI_ERR_OK           The request was successfully performed.
+ *	SK_PNMI_ERR_GENERAL      A general severe internal error occured.
+ *	SK_PNMI_ERR_TOO_SHORT    The passed buffer is too short to contain
+ *	                         the correct data (e.g. a 32bit value is
+ *	                         needed, but a 16 bit value was passed).
+ *	SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't
+ *                           exist (e.g. port instance 3 on a two port
+ *	                         adapter.
+ */
+PNMI_STATIC int MacPrivateStat(
+SK_AC *pAC,		/* Pointer to adapter context */
+SK_IOC IoC,		/* IO context handle */
+int Action,		/* GET/PRESET/SET action */
+SK_U32 Id,		/* Object ID that is to be processed */
+char *pBuf,		/* Buffer used for the management data transfer */
+unsigned int *pLen,	/* On call: pBuf buffer length. On return: used buffer */
+SK_U32 Instance,	/* Instance (1..n) that is to be queried or -1 */
+unsigned int TableIndex, /* Index to the Id table */
+SK_U32 NetIndex)	/* NetIndex (0..n), in single net mode always zero */
+{
+	unsigned int	LogPortMax;
+	unsigned int	LogPortIndex;
+	unsigned int	PhysPortMax;
+	unsigned int	Limit;
+	unsigned int	Offset;
+	int				MacType;
+	int				Ret;
+	SK_U64			StatVal;
+	
+	
+
+	/* Calculate instance if wished. MAC index 0 is the virtual MAC */
+	PhysPortMax = pAC->GIni.GIMacsFound;
+	LogPortMax = SK_PNMI_PORT_PHYS2LOG(PhysPortMax);
+	
+	MacType = pAC->GIni.GIMacType;
+
+	if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { /* Dual net mode */
+		LogPortMax--;
+	}
+
+	if ((Instance != (SK_U32)(-1))) { /* Only one specific instance is queried */
+		/* Check instance range */
+		if ((Instance < 1) || (Instance > LogPortMax)) {
+
+			*pLen = 0;
+			return (SK_PNMI_ERR_UNKNOWN_INST);
+		}
+		LogPortIndex = SK_PNMI_PORT_INST2LOG(Instance);
+		Limit = LogPortIndex + 1;
+	}
+
+	else { /* Instance == (SK_U32)(-1), get all Instances of that OID */
+
+		LogPortIndex = 0;
+		Limit = LogPortMax;
+	}
+
+	/* Check action */
+	if (Action != SK_PNMI_GET) {
+
+		*pLen = 0;
+		return (SK_PNMI_ERR_READ_ONLY);
+	}
+
+	/* Check length */
+	if (*pLen < (Limit - LogPortIndex) * sizeof(SK_U64)) {
+
+		*pLen = (Limit - LogPortIndex) * sizeof(SK_U64);
+		return (SK_PNMI_ERR_TOO_SHORT);
+	}
+
+	/*
+	 * Update MAC statistic and increment semaphore to indicate that
+	 * an update was already done.
+	 */
+	Ret = MacUpdate(pAC, IoC, 0, pAC->GIni.GIMacsFound - 1);
+	if (Ret != SK_PNMI_ERR_OK) {
+
+		*pLen = 0;
+		return (Ret);
+	}
+	pAC->Pnmi.MacUpdatedFlag ++;
+
+	/* Get value */
+	Offset = 0;
+	for (; LogPortIndex < Limit; LogPortIndex ++) {
+
+		switch (Id) {
+
+/* XXX not yet implemented due to XMAC problems
+		case OID_SKGE_STAT_TX_UTIL:
+			return (SK_PNMI_ERR_GENERAL);
+*/
+/* XXX not yet implemented due to XMAC problems
+		case OID_SKGE_STAT_RX_UTIL:
+			return (SK_PNMI_ERR_GENERAL);
+*/
+		case OID_SKGE_STAT_RX:
+			if (MacType == SK_MAC_GMAC) {
+				StatVal =
+					GetStatVal(pAC, IoC, LogPortIndex,
+							   SK_PNMI_HRX_BROADCAST, NetIndex) +
+					GetStatVal(pAC, IoC, LogPortIndex,
+							   SK_PNMI_HRX_MULTICAST, NetIndex) +
+					GetStatVal(pAC, IoC, LogPortIndex,
+							   SK_PNMI_HRX_UNICAST, NetIndex) +
+					GetStatVal(pAC, IoC, LogPortIndex,
+							   SK_PNMI_HRX_UNDERSIZE, NetIndex);
+			}
+			else {
+				StatVal = GetStatVal(pAC, IoC, LogPortIndex,
+					IdTable[TableIndex].Param, NetIndex);
+			}
+			break;
+
+		case OID_SKGE_STAT_TX:
+			if (MacType == SK_MAC_GMAC) {
+				StatVal =
+					GetStatVal(pAC, IoC, LogPortIndex,
+							   SK_PNMI_HTX_BROADCAST, NetIndex) +
+					GetStatVal(pAC, IoC, LogPortIndex,
+							   SK_PNMI_HTX_MULTICAST, NetIndex) +
+					GetStatVal(pAC, IoC, LogPortIndex,
+							   SK_PNMI_HTX_UNICAST, NetIndex);
+			}
+			else {
+				StatVal = GetStatVal(pAC, IoC, LogPortIndex,
+					IdTable[TableIndex].Param, NetIndex);
+			}
+			break;
+
+		default:
+			StatVal = GetStatVal(pAC, IoC, LogPortIndex,
+				IdTable[TableIndex].Param, NetIndex);
+		}
+		SK_PNMI_STORE_U64(pBuf + Offset, StatVal);
+
+		Offset += sizeof(SK_U64);
+	}
+	*pLen = Offset;
+
+	pAC->Pnmi.MacUpdatedFlag --;
+
+	return (SK_PNMI_ERR_OK);
+}
+
+/*****************************************************************************
+ *
+ * Addr - OID handler function of OID_SKGE_PHYS_CUR_ADDR and _FAC_ADDR
+ *
+ * Description:
+ *	Get/Presets/Sets the current and factory MAC address. The MAC
+ *	address of the virtual port, which is reported to the OS, may
+ *	not be changed, but the physical ones. A set to the virtual port
+ *	will be ignored. No error should be reported because otherwise
+ *	a multiple instance set (-1) would always fail.
+ *
+ * Returns:
+ *	SK_PNMI_ERR_OK           The request was successfully performed.
+ *	SK_PNMI_ERR_GENERAL      A general severe internal error occured.
+ *	SK_PNMI_ERR_TOO_SHORT    The passed buffer is too short to contain
+ *	                         the correct data (e.g. a 32bit value is
+ *	                         needed, but a 16 bit value was passed).
+ *	SK_PNMI_ERR_BAD_VALUE    The passed value is not in the valid
+ *	                         value range.
+ *	SK_PNMI_ERR_READ_ONLY    The OID is read-only and cannot be set.
+ *	SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't
+ *                           exist (e.g. port instance 3 on a two port
+ *	                         adapter.
+ */
+PNMI_STATIC int Addr(
+SK_AC *pAC,		/* Pointer to adapter context */
+SK_IOC IoC,		/* IO context handle */
+int Action,		/* GET/PRESET/SET action */
+SK_U32 Id,		/* Object ID that is to be processed */
+char *pBuf,		/* Buffer used for the management data transfer */
+unsigned int *pLen,	/* On call: pBuf buffer length. On return: used buffer */
+SK_U32 Instance,	/* Instance (1..n) that is to be queried or -1 */
+unsigned int TableIndex, /* Index to the Id table */
+SK_U32 NetIndex)	/* NetIndex (0..n), in single net mode always zero */
+{
+	int		Ret;
+	unsigned int	LogPortMax;
+	unsigned int	PhysPortMax;
+	unsigned int	LogPortIndex;
+	unsigned int	PhysPortIndex;
+	unsigned int	Limit;
+	unsigned int	Offset = 0;
+
+	/*
+	 * Calculate instance if wished. MAC index 0 is the virtual
+	 * MAC.
+	 */
+	PhysPortMax = pAC->GIni.GIMacsFound;
+	LogPortMax = SK_PNMI_PORT_PHYS2LOG(PhysPortMax);
+
+	if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { /* Dual net mode */
+		LogPortMax--;
+	}
+
+	if ((Instance != (SK_U32)(-1))) { /* Only one specific instance is queried */
+		/* Check instance range */
+		if ((Instance < 1) || (Instance > LogPortMax)) {
+
+			*pLen = 0;
+			return (SK_PNMI_ERR_UNKNOWN_INST);
+		}
+		LogPortIndex = SK_PNMI_PORT_INST2LOG(Instance);
+		Limit = LogPortIndex + 1;
+	}
+	else { /* Instance == (SK_U32)(-1), get all Instances of that OID */
+
+		LogPortIndex = 0;
+		Limit = LogPortMax;
+	}
+
+	/*
+	 * Perform Action
+	 */
+	if (Action == SK_PNMI_GET) {
+
+		/* Check length */
+		if (*pLen < (Limit - LogPortIndex) * 6) {
+
+			*pLen = (Limit - LogPortIndex) * 6;
+			return (SK_PNMI_ERR_TOO_SHORT);
+		}
+
+		/*
+		 * Get value
+		 */
+		for (; LogPortIndex < Limit; LogPortIndex ++) {
+
+			switch (Id) {
+
+			case OID_SKGE_PHYS_CUR_ADDR:
+				if (LogPortIndex == 0) {
+					CopyMac(pBuf + Offset, &pAC->Addr.Net[NetIndex].CurrentMacAddress);
+				}
+				else {
+					PhysPortIndex = SK_PNMI_PORT_LOG2PHYS(pAC, LogPortIndex);
+
+					CopyMac(pBuf + Offset,
+						&pAC->Addr.Port[PhysPortIndex].CurrentMacAddress);
+				}
+				Offset += 6;
+				break;
+
+			case OID_SKGE_PHYS_FAC_ADDR:
+				if (LogPortIndex == 0) {
+					CopyMac(pBuf + Offset,
+						&pAC->Addr.Net[NetIndex].PermanentMacAddress);
+				}
+				else {
+					PhysPortIndex = SK_PNMI_PORT_LOG2PHYS(
+						pAC, LogPortIndex);
+
+					CopyMac(pBuf + Offset,
+						&pAC->Addr.Port[PhysPortIndex].PermanentMacAddress);
+				}
+				Offset += 6;
+				break;
+
+			default:
+				SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR008,
+					SK_PNMI_ERR008MSG);
+
+				*pLen = 0;
+				return (SK_PNMI_ERR_GENERAL);
+			}
+		}
+
+		*pLen = Offset;
+	}
+	else {
+		/*
+		 * The logical MAC address may not be changed only
+		 * the physical ones
+		 */
+		if (Id == OID_SKGE_PHYS_FAC_ADDR) {
+
+			*pLen = 0;
+			return (SK_PNMI_ERR_READ_ONLY);
+		}
+
+		/*
+		 * Only the current address may be changed
+		 */
+		if (Id != OID_SKGE_PHYS_CUR_ADDR) {
+
+			SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR009,
+				SK_PNMI_ERR009MSG);
+
+			*pLen = 0;
+			return (SK_PNMI_ERR_GENERAL);
+		}
+
+		/* Check length */
+		if (*pLen < (Limit - LogPortIndex) * 6) {
+
+			*pLen = (Limit - LogPortIndex) * 6;
+			return (SK_PNMI_ERR_TOO_SHORT);
+		}
+		if (*pLen > (Limit - LogPortIndex) * 6) {
+
+			*pLen = 0;
+			return (SK_PNMI_ERR_BAD_VALUE);
+		}
+
+		/*
+		 * Check Action
+		 */
+		if (Action == SK_PNMI_PRESET) {
+
+			*pLen = 0;
+			return (SK_PNMI_ERR_OK);
+		}
+
+		/*
+		 * Set OID_SKGE_MAC_CUR_ADDR
+		 */
+		for (; LogPortIndex < Limit; LogPortIndex ++, Offset += 6) {
+
+			/*
+			 * A set to virtual port and set of broadcast
+			 * address will be ignored
+			 */
+			if (LogPortIndex == 0 || SK_MEMCMP(pBuf + Offset,
+				"\xff\xff\xff\xff\xff\xff", 6) == 0) {
+
+				continue;
+			}
+
+			PhysPortIndex = SK_PNMI_PORT_LOG2PHYS(pAC,
+				LogPortIndex);
+
+			Ret = SkAddrOverride(pAC, IoC, PhysPortIndex,
+				(SK_MAC_ADDR *)(pBuf + Offset),
+				(LogPortIndex == 0 ? SK_ADDR_VIRTUAL_ADDRESS :
+				SK_ADDR_PHYSICAL_ADDRESS));
+			if (Ret != SK_ADDR_OVERRIDE_SUCCESS) {
+
+				return (SK_PNMI_ERR_GENERAL);
+			}
+		}
+		*pLen = Offset;
+	}
+
+	return (SK_PNMI_ERR_OK);
+}
+
+/*****************************************************************************
+ *
+ * CsumStat - OID handler function of OID_SKGE_CHKSM_XXX
+ *
+ * Description:
+ *	Retrieves the statistic values of the CSUM module. The CSUM data
+ *	structure must be available in the SK_AC even if the CSUM module
+ *	is not included, because PNMI reads the statistic data from the
+ *	CSUM part of SK_AC directly.
+ *
+ * Returns:
+ *	SK_PNMI_ERR_OK           The request was successfully performed.
+ *	SK_PNMI_ERR_GENERAL      A general severe internal error occured.
+ *	SK_PNMI_ERR_TOO_SHORT    The passed buffer is too short to contain
+ *	                         the correct data (e.g. a 32bit value is
+ *	                         needed, but a 16 bit value was passed).
+ *	SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't
+ *                           exist (e.g. port instance 3 on a two port
+ *	                         adapter.
+ */
+PNMI_STATIC int CsumStat(
+SK_AC *pAC,		/* Pointer to adapter context */
+SK_IOC IoC,		/* IO context handle */
+int Action,		/* GET/PRESET/SET action */
+SK_U32 Id,		/* Object ID that is to be processed */
+char *pBuf,		/* Buffer used for the management data transfer */
+unsigned int *pLen,	/* On call: pBuf buffer length. On return: used buffer */
+SK_U32 Instance,	/* Instance (1..n) that is to be queried or -1 */
+unsigned int TableIndex, /* Index to the Id table */
+SK_U32 NetIndex)	/* NetIndex (0..n), in single net mode always zero */
+{
+	unsigned int	Index;
+	unsigned int	Limit;
+	unsigned int	Offset = 0;
+	SK_U64		StatVal;
+
+
+	/*
+	 * Calculate instance if wished
+	 */
+	if (Instance != (SK_U32)(-1)) {
+
+		if ((Instance < 1) || (Instance > SKCS_NUM_PROTOCOLS)) {
+
+			*pLen = 0;
+			return (SK_PNMI_ERR_UNKNOWN_INST);
+		}
+		Index = (unsigned int)Instance - 1;
+		Limit = Index + 1;
+	}
+	else {
+		Index = 0;
+		Limit = SKCS_NUM_PROTOCOLS;
+	}
+
+	/*
+	 * Check action
+	 */
+	if (Action != SK_PNMI_GET) {
+
+		*pLen = 0;
+		return (SK_PNMI_ERR_READ_ONLY);
+	}
+
+	/* Check length */
+	if (*pLen < (Limit - Index) * sizeof(SK_U64)) {
+
+		*pLen = (Limit - Index) * sizeof(SK_U64);
+		return (SK_PNMI_ERR_TOO_SHORT);
+	}
+
+	/*
+	 * Get value
+	 */
+	for (; Index < Limit; Index ++) {
+
+		switch (Id) {
+
+		case OID_SKGE_CHKSM_RX_OK_CTS:
+			StatVal = pAC->Csum.ProtoStats[NetIndex][Index].RxOkCts;
+			break;
+
+		case OID_SKGE_CHKSM_RX_UNABLE_CTS:
+			StatVal = pAC->Csum.ProtoStats[NetIndex][Index].RxUnableCts;
+			break;
+
+		case OID_SKGE_CHKSM_RX_ERR_CTS:
+			StatVal = pAC->Csum.ProtoStats[NetIndex][Index].RxErrCts;
+			break;
+
+		case OID_SKGE_CHKSM_TX_OK_CTS:
+			StatVal = pAC->Csum.ProtoStats[NetIndex][Index].TxOkCts;
+			break;
+
+		case OID_SKGE_CHKSM_TX_UNABLE_CTS:
+			StatVal = pAC->Csum.ProtoStats[NetIndex][Index].TxUnableCts;
+			break;
+
+		default:
+			SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR010,
+				SK_PNMI_ERR010MSG);
+
+			*pLen = 0;
+			return (SK_PNMI_ERR_GENERAL);
+		}
+
+		SK_PNMI_STORE_U64(pBuf + Offset, StatVal);
+		Offset += sizeof(SK_U64);
+	}
+
+	/*
+	 * Store used buffer space
+	 */
+	*pLen = Offset;
+
+	return (SK_PNMI_ERR_OK);
+}
+
+/*****************************************************************************
+ *
+ * SensorStat - OID handler function of OID_SKGE_SENSOR_XXX
+ *
+ * Description:
+ *	Retrieves the statistic values of the I2C module, which handles
+ *	the temperature and voltage sensors.
+ *
+ * Returns:
+ *	SK_PNMI_ERR_OK           The request was successfully performed.
+ *	SK_PNMI_ERR_GENERAL      A general severe internal error occured.
+ *	SK_PNMI_ERR_TOO_SHORT    The passed buffer is too short to contain
+ *	                         the correct data (e.g. a 32bit value is
+ *	                         needed, but a 16 bit value was passed).
+ *	SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't
+ *                           exist (e.g. port instance 3 on a two port
+ *	                         adapter.
+ */
+PNMI_STATIC int SensorStat(
+SK_AC *pAC,		/* Pointer to adapter context */
+SK_IOC IoC,		/* IO context handle */
+int Action,		/* GET/PRESET/SET action */
+SK_U32 Id,		/* Object ID that is to be processed */
+char *pBuf,		/* Buffer used for the management data transfer */
+unsigned int *pLen,	/* On call: pBuf buffer length. On return: used buffer */
+SK_U32 Instance,	/* Instance (1..n) that is to be queried or -1 */
+unsigned int TableIndex, /* Index to the Id table */
+SK_U32 NetIndex)	/* NetIndex (0..n), in single net mode always zero */
+{
+	unsigned int	i;
+	unsigned int	Index;
+	unsigned int	Limit;
+	unsigned int	Offset;
+	unsigned int	Len;
+	SK_U32		Val32;
+	SK_U64		Val64;
+
+
+	/*
+	 * Calculate instance if wished
+	 */
+	if ((Instance != (SK_U32)(-1))) {
+
+		if ((Instance < 1) || (Instance > (SK_U32)pAC->I2c.MaxSens)) {
+
+			*pLen = 0;
+			return (SK_PNMI_ERR_UNKNOWN_INST);
+		}
+
+		Index = (unsigned int)Instance -1;
+		Limit = (unsigned int)Instance;
+	}
+	else {
+		Index = 0;
+		Limit = (unsigned int) pAC->I2c.MaxSens;
+	}
+
+	/*
+	 * Check action
+	 */
+	if (Action != SK_PNMI_GET) {
+
+		*pLen = 0;
+		return (SK_PNMI_ERR_READ_ONLY);
+	}
+
+	/* Check length */
+	switch (Id) {
+
+	case OID_SKGE_SENSOR_VALUE:
+	case OID_SKGE_SENSOR_WAR_THRES_LOW:
+	case OID_SKGE_SENSOR_WAR_THRES_UPP:
+	case OID_SKGE_SENSOR_ERR_THRES_LOW:
+	case OID_SKGE_SENSOR_ERR_THRES_UPP:
+		if (*pLen < (Limit - Index) * sizeof(SK_U32)) {
+
+			*pLen = (Limit - Index) * sizeof(SK_U32);
+			return (SK_PNMI_ERR_TOO_SHORT);
+		}
+		break;
+
+	case OID_SKGE_SENSOR_DESCR:
+		for (Offset = 0, i = Index; i < Limit; i ++) {
+
+			Len = (unsigned int)
+				SK_STRLEN(pAC->I2c.SenTable[i].SenDesc) + 1;
+			if (Len >= SK_PNMI_STRINGLEN2) {
+
+				SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR011,
+					SK_PNMI_ERR011MSG);
+
+				*pLen = 0;
+				return (SK_PNMI_ERR_GENERAL);
+			}
+			Offset += Len;
+		}
+		if (*pLen < Offset) {
+
+			*pLen = Offset;
+			return (SK_PNMI_ERR_TOO_SHORT);
+		}
+		break;
+
+	case OID_SKGE_SENSOR_INDEX:
+	case OID_SKGE_SENSOR_TYPE:
+	case OID_SKGE_SENSOR_STATUS:
+		if (*pLen < Limit - Index) {
+
+			*pLen = Limit - Index;
+			return (SK_PNMI_ERR_TOO_SHORT);
+		}
+		break;
+
+	case OID_SKGE_SENSOR_WAR_CTS:
+	case OID_SKGE_SENSOR_WAR_TIME:
+	case OID_SKGE_SENSOR_ERR_CTS:
+	case OID_SKGE_SENSOR_ERR_TIME:
+		if (*pLen < (Limit - Index) * sizeof(SK_U64)) {
+
+			*pLen = (Limit - Index) * sizeof(SK_U64);
+			return (SK_PNMI_ERR_TOO_SHORT);
+		}
+		break;
+
+	default:
+		SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR012,
+			SK_PNMI_ERR012MSG);
+
+		*pLen = 0;
+		return (SK_PNMI_ERR_GENERAL);
+
+	}
+
+	/*
+	 * Get value
+	 */
+	for (Offset = 0; Index < Limit; Index ++) {
+
+		switch (Id) {
+
+		case OID_SKGE_SENSOR_INDEX:
+			*(pBuf + Offset) = (char)Index;
+			Offset += sizeof(char);
+			break;
+
+		case OID_SKGE_SENSOR_DESCR:
+			Len = SK_STRLEN(pAC->I2c.SenTable[Index].SenDesc);
+			SK_MEMCPY(pBuf + Offset + 1,
+				pAC->I2c.SenTable[Index].SenDesc, Len);
+			*(pBuf + Offset) = (char)Len;
+			Offset += Len + 1;
+			break;
+
+		case OID_SKGE_SENSOR_TYPE:
+			*(pBuf + Offset) =
+				(char)pAC->I2c.SenTable[Index].SenType;
+			Offset += sizeof(char);
+			break;
+
+		case OID_SKGE_SENSOR_VALUE:
+			Val32 = (SK_U32)pAC->I2c.SenTable[Index].SenValue;
+			SK_PNMI_STORE_U32(pBuf + Offset, Val32);
+			Offset += sizeof(SK_U32);
+			break;
+
+		case OID_SKGE_SENSOR_WAR_THRES_LOW:
+			Val32 = (SK_U32)pAC->I2c.SenTable[Index].
+				SenThreWarnLow;
+			SK_PNMI_STORE_U32(pBuf + Offset, Val32);
+			Offset += sizeof(SK_U32);
+			break;
+
+		case OID_SKGE_SENSOR_WAR_THRES_UPP:
+			Val32 = (SK_U32)pAC->I2c.SenTable[Index].
+				SenThreWarnHigh;
+			SK_PNMI_STORE_U32(pBuf + Offset, Val32);
+			Offset += sizeof(SK_U32);
+			break;
+
+		case OID_SKGE_SENSOR_ERR_THRES_LOW:
+			Val32 = (SK_U32)pAC->I2c.SenTable[Index].
+				SenThreErrLow;
+			SK_PNMI_STORE_U32(pBuf + Offset, Val32);
+			Offset += sizeof(SK_U32);
+			break;
+
+		case OID_SKGE_SENSOR_ERR_THRES_UPP:
+			Val32 = pAC->I2c.SenTable[Index].SenThreErrHigh;
+			SK_PNMI_STORE_U32(pBuf + Offset, Val32);
+			Offset += sizeof(SK_U32);
+			break;
+
+		case OID_SKGE_SENSOR_STATUS:
+			*(pBuf + Offset) =
+				(char)pAC->I2c.SenTable[Index].SenErrFlag;
+			Offset += sizeof(char);
+			break;
+
+		case OID_SKGE_SENSOR_WAR_CTS:
+			Val64 = pAC->I2c.SenTable[Index].SenWarnCts;
+			SK_PNMI_STORE_U64(pBuf + Offset, Val64);
+			Offset += sizeof(SK_U64);
+			break;
+
+		case OID_SKGE_SENSOR_ERR_CTS:
+			Val64 = pAC->I2c.SenTable[Index].SenErrCts;
+			SK_PNMI_STORE_U64(pBuf + Offset, Val64);
+			Offset += sizeof(SK_U64);
+			break;
+
+		case OID_SKGE_SENSOR_WAR_TIME:
+			Val64 = SK_PNMI_HUNDREDS_SEC(pAC->I2c.SenTable[Index].
+				SenBegWarnTS);
+			SK_PNMI_STORE_U64(pBuf + Offset, Val64);
+			Offset += sizeof(SK_U64);
+			break;
+
+		case OID_SKGE_SENSOR_ERR_TIME:
+			Val64 = SK_PNMI_HUNDREDS_SEC(pAC->I2c.SenTable[Index].
+				SenBegErrTS);
+			SK_PNMI_STORE_U64(pBuf + Offset, Val64);
+			Offset += sizeof(SK_U64);
+			break;
+
+		default:
+			SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_ERR,
+				("SensorStat: Unknown OID should be handled before"));
+
+			return (SK_PNMI_ERR_GENERAL);
+		}
+	}
+
+	/*
+	 * Store used buffer space
+	 */
+	*pLen = Offset;
+
+	return (SK_PNMI_ERR_OK);
+}
+
+/*****************************************************************************
+ *
+ * Vpd - OID handler function of OID_SKGE_VPD_XXX
+ *
+ * Description:
+ *	Get/preset/set of VPD data. As instance the name of a VPD key
+ *	can be passed. The Instance parameter is a SK_U32 and can be
+ *	used as a string buffer for the VPD key, because their maximum
+ *	length is 4 byte.
+ *
+ * Returns:
+ *	SK_PNMI_ERR_OK           The request was successfully performed.
+ *	SK_PNMI_ERR_GENERAL      A general severe internal error occured.
+ *	SK_PNMI_ERR_TOO_SHORT    The passed buffer is too short to contain
+ *	                         the correct data (e.g. a 32bit value is
+ *	                         needed, but a 16 bit value was passed).
+ *	SK_PNMI_ERR_BAD_VALUE    The passed value is not in the valid
+ *	                         value range.
+ *	SK_PNMI_ERR_READ_ONLY    The OID is read-only and cannot be set.
+ *	SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't
+ *                           exist (e.g. port instance 3 on a two port
+ *	                         adapter.
+ */
+PNMI_STATIC int Vpd(
+SK_AC *pAC,		/* Pointer to adapter context */
+SK_IOC IoC,		/* IO context handle */
+int Action,		/* GET/PRESET/SET action */
+SK_U32 Id,		/* Object ID that is to be processed */
+char *pBuf,		/* Buffer used for the management data transfer */
+unsigned int *pLen,	/* On call: pBuf buffer length. On return: used buffer */
+SK_U32 Instance,	/* Instance (1..n) that is to be queried or -1 */
+unsigned int TableIndex, /* Index to the Id table */
+SK_U32 NetIndex)	/* NetIndex (0..n), in single net mode always zero */
+{
+	SK_VPD_STATUS	*pVpdStatus;
+	unsigned int	BufLen;
+	char		Buf[256];
+	char		KeyArr[SK_PNMI_VPD_ENTRIES][SK_PNMI_VPD_KEY_SIZE];
+	char		KeyStr[SK_PNMI_VPD_KEY_SIZE];
+	unsigned int	KeyNo;
+	unsigned int	Offset;
+	unsigned int	Index;
+	unsigned int	FirstIndex;
+	unsigned int	LastIndex;
+	unsigned int	Len;
+	int		Ret;
+	SK_U32		Val32;
+
+	/*
+	 * Get array of all currently stored VPD keys
+	 */
+	Ret = GetVpdKeyArr(pAC, IoC, &KeyArr[0][0], sizeof(KeyArr), &KeyNo);
+	if (Ret != SK_PNMI_ERR_OK) {
+		*pLen = 0;
+		return (Ret);
+	}
+
+	/*
+	 * If instance is not -1, try to find the requested VPD key for
+	 * the multiple instance variables. The other OIDs as for example
+	 * OID VPD_ACTION are single instance variables and must be
+	 * handled separatly.
+	 */
+	FirstIndex = 0;
+	LastIndex = KeyNo;
+
+	if ((Instance != (SK_U32)(-1))) {
+
+		if (Id == OID_SKGE_VPD_KEY || Id == OID_SKGE_VPD_VALUE ||
+			Id == OID_SKGE_VPD_ACCESS) {
+
+			SK_STRNCPY(KeyStr, (char *)&Instance, 4);
+			KeyStr[4] = 0;
+
+			for (Index = 0; Index < KeyNo; Index ++) {
+
+				if (SK_STRCMP(KeyStr, KeyArr[Index]) == 0) {
+					FirstIndex = Index;
+					LastIndex = Index+1;
+					break;
+				}
+			}
+			if (Index == KeyNo) {
+
+				*pLen = 0;
+				return (SK_PNMI_ERR_UNKNOWN_INST);
+			}
+		}
+		else if (Instance != 1) {
+
+			*pLen = 0;
+			return (SK_PNMI_ERR_UNKNOWN_INST);
+		}
+	}
+
+	/*
+	 * Get value, if a query should be performed
+	 */
+	if (Action == SK_PNMI_GET) {
+
+		switch (Id) {
+
+		case OID_SKGE_VPD_FREE_BYTES:
+			/* Check length of buffer */
+			if (*pLen < sizeof(SK_U32)) {
+
+				*pLen = sizeof(SK_U32);
+				return (SK_PNMI_ERR_TOO_SHORT);
+			}
+			/* Get number of free bytes */
+			pVpdStatus = VpdStat(pAC, IoC);
+			if (pVpdStatus == NULL) {
+
+				SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR017,
+					SK_PNMI_ERR017MSG);
+
+				*pLen = 0;
+				return (SK_PNMI_ERR_GENERAL);
+			}
+			if ((pVpdStatus->vpd_status & VPD_VALID) == 0) {
+
+				SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR018,
+					SK_PNMI_ERR018MSG);
+
+				*pLen = 0;
+				return (SK_PNMI_ERR_GENERAL);
+			}
+			
+			Val32 = (SK_U32)pVpdStatus->vpd_free_rw;
+			SK_PNMI_STORE_U32(pBuf, Val32);
+			*pLen = sizeof(SK_U32);
+			break;
+
+		case OID_SKGE_VPD_ENTRIES_LIST:
+			/* Check length */
+			for (Len = 0, Index = 0; Index < KeyNo; Index ++) {
+
+				Len += SK_STRLEN(KeyArr[Index]) + 1;
+			}
+			if (*pLen < Len) {
+
+				*pLen = Len;
+				return (SK_PNMI_ERR_TOO_SHORT);
+			}
+
+			/* Get value */
+			*(pBuf) = (char)Len - 1;
+			for (Offset = 1, Index = 0; Index < KeyNo; Index ++) {
+
+				Len = SK_STRLEN(KeyArr[Index]);
+				SK_MEMCPY(pBuf + Offset, KeyArr[Index], Len);
+
+				Offset += Len;
+
+				if (Index < KeyNo - 1) {
+
+					*(pBuf + Offset) = ' ';
+					Offset ++;
+				}
+			}
+			*pLen = Offset;
+			break;
+
+		case OID_SKGE_VPD_ENTRIES_NUMBER:
+			/* Check length */
+			if (*pLen < sizeof(SK_U32)) {
+
+				*pLen = sizeof(SK_U32);
+				return (SK_PNMI_ERR_TOO_SHORT);
+			}
+
+			Val32 = (SK_U32)KeyNo;
+			SK_PNMI_STORE_U32(pBuf, Val32);
+			*pLen = sizeof(SK_U32);
+			break;
+
+		case OID_SKGE_VPD_KEY:
+			/* Check buffer length, if it is large enough */
+			for (Len = 0, Index = FirstIndex;
+				Index < LastIndex; Index ++) {
+
+				Len += SK_STRLEN(KeyArr[Index]) + 1;
+			}
+			if (*pLen < Len) {
+
+				*pLen = Len;
+				return (SK_PNMI_ERR_TOO_SHORT);
+			}
+
+			/*
+			 * Get the key to an intermediate buffer, because
+			 * we have to prepend a length byte.
+			 */
+			for (Offset = 0, Index = FirstIndex;
+				Index < LastIndex; Index ++) {
+
+				Len = SK_STRLEN(KeyArr[Index]);
+
+				*(pBuf + Offset) = (char)Len;
+				SK_MEMCPY(pBuf + Offset + 1, KeyArr[Index],
+					Len);
+				Offset += Len + 1;
+			}
+			*pLen = Offset;
+			break;
+
+		case OID_SKGE_VPD_VALUE:
+			/* Check the buffer length if it is large enough */
+			for (Offset = 0, Index = FirstIndex;
+				Index < LastIndex; Index ++) {
+
+				BufLen = 256;
+				if (VpdRead(pAC, IoC, KeyArr[Index], Buf,
+					(int *)&BufLen) > 0 ||
+					BufLen >= SK_PNMI_VPD_DATALEN) {
+
+					SK_ERR_LOG(pAC, SK_ERRCL_SW,
+						SK_PNMI_ERR021,
+						SK_PNMI_ERR021MSG);
+
+					return (SK_PNMI_ERR_GENERAL);
+				}
+				Offset += BufLen + 1;
+			}
+			if (*pLen < Offset) {
+
+				*pLen = Offset;
+				return (SK_PNMI_ERR_TOO_SHORT);
+			}
+
+			/*
+			 * Get the value to an intermediate buffer, because
+			 * we have to prepend a length byte.
+			 */
+			for (Offset = 0, Index = FirstIndex;
+				Index < LastIndex; Index ++) {
+
+				BufLen = 256;
+				if (VpdRead(pAC, IoC, KeyArr[Index], Buf,
+					(int *)&BufLen) > 0 ||
+					BufLen >= SK_PNMI_VPD_DATALEN) {
+
+					SK_ERR_LOG(pAC, SK_ERRCL_SW,
+						SK_PNMI_ERR022,
+						SK_PNMI_ERR022MSG);
+
+					*pLen = 0;
+					return (SK_PNMI_ERR_GENERAL);
+				}
+
+				*(pBuf + Offset) = (char)BufLen;
+				SK_MEMCPY(pBuf + Offset + 1, Buf, BufLen);
+				Offset += BufLen + 1;
+			}
+			*pLen = Offset;
+			break;
+
+		case OID_SKGE_VPD_ACCESS:
+			if (*pLen < LastIndex - FirstIndex) {
+
+				*pLen = LastIndex - FirstIndex;
+				return (SK_PNMI_ERR_TOO_SHORT);
+			}
+
+			for (Offset = 0, Index = FirstIndex;
+				Index < LastIndex; Index ++) {
+
+				if (VpdMayWrite(KeyArr[Index])) {
+
+					*(pBuf + Offset) = SK_PNMI_VPD_RW;
+				}
+				else {
+					*(pBuf + Offset) = SK_PNMI_VPD_RO;
+				}
+				Offset ++;
+			}
+			*pLen = Offset;
+			break;
+
+		case OID_SKGE_VPD_ACTION:
+			Offset = LastIndex - FirstIndex;
+			if (*pLen < Offset) {
+
+				*pLen = Offset;
+				return (SK_PNMI_ERR_TOO_SHORT);
+			}
+			SK_MEMSET(pBuf, 0, Offset);
+			*pLen = Offset;
+			break;
+
+		default:
+			SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR023,
+				SK_PNMI_ERR023MSG);
+
+			*pLen = 0;
+			return (SK_PNMI_ERR_GENERAL);
+		}
+	}
+	else {
+		/* The only OID which can be set is VPD_ACTION */
+		if (Id != OID_SKGE_VPD_ACTION) {
+
+			if (Id == OID_SKGE_VPD_FREE_BYTES ||
+				Id == OID_SKGE_VPD_ENTRIES_LIST ||
+				Id == OID_SKGE_VPD_ENTRIES_NUMBER ||
+				Id == OID_SKGE_VPD_KEY ||
+				Id == OID_SKGE_VPD_VALUE ||
+				Id == OID_SKGE_VPD_ACCESS) {
+
+				*pLen = 0;
+				return (SK_PNMI_ERR_READ_ONLY);
+			}
+
+			SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR024,
+				SK_PNMI_ERR024MSG);
+
+			*pLen = 0;
+			return (SK_PNMI_ERR_GENERAL);
+		}
+
+		/*
+		 * From this point we handle VPD_ACTION. Check the buffer
+		 * length. It should at least have the size of one byte.
+		 */
+		if (*pLen < 1) {
+
+			*pLen = 1;
+			return (SK_PNMI_ERR_TOO_SHORT);
+		}
+
+		/*
+		 * The first byte contains the VPD action type we should
+		 * perform.
+		 */
+		switch (*pBuf) {
+
+		case SK_PNMI_VPD_IGNORE:
+			/* Nothing to do */
+			break;
+
+		case SK_PNMI_VPD_CREATE:
+			/*
+			 * We have to create a new VPD entry or we modify
+			 * an existing one. Check first the buffer length.
+			 */
+			if (*pLen < 4) {
+
+				*pLen = 4;
+				return (SK_PNMI_ERR_TOO_SHORT);
+			}
+			KeyStr[0] = pBuf[1];
+			KeyStr[1] = pBuf[2];
+			KeyStr[2] = 0;
+
+			/*
+			 * Is the entry writable or does it belong to the
+			 * read-only area?
+			 */
+			if (!VpdMayWrite(KeyStr)) {
+
+				*pLen = 0;
+				return (SK_PNMI_ERR_BAD_VALUE);
+			}
+
+			Offset = (int)pBuf[3] & 0xFF;
+
+			SK_MEMCPY(Buf, pBuf + 4, Offset);
+			Buf[Offset] = 0;
+
+			/* A preset ends here */
+			if (Action == SK_PNMI_PRESET) {
+
+				return (SK_PNMI_ERR_OK);
+			}
+
+			/* Write the new entry or modify an existing one */
+			Ret = VpdWrite(pAC, IoC, KeyStr, Buf);
+			if (Ret == SK_PNMI_VPD_NOWRITE ) {
+
+				*pLen = 0;
+				return (SK_PNMI_ERR_BAD_VALUE);
+			}
+			else if (Ret != SK_PNMI_VPD_OK) {
+
+				SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR025,
+					SK_PNMI_ERR025MSG);
+
+				*pLen = 0;
+				return (SK_PNMI_ERR_GENERAL);
+			}
+
+			/*
+			 * Perform an update of the VPD data. This is
+			 * not mandantory, but just to be sure.
+			 */
+			Ret = VpdUpdate(pAC, IoC);
+			if (Ret != SK_PNMI_VPD_OK) {
+
+				SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR026,
+					SK_PNMI_ERR026MSG);
+
+				*pLen = 0;
+				return (SK_PNMI_ERR_GENERAL);
+			}
+			break;
+
+		case SK_PNMI_VPD_DELETE:
+			/* Check if the buffer size is plausible */
+			if (*pLen < 3) {
+
+				*pLen = 3;
+				return (SK_PNMI_ERR_TOO_SHORT);
+			}
+			if (*pLen > 3) {
+
+				*pLen = 0;
+				return (SK_PNMI_ERR_BAD_VALUE);
+			}
+			KeyStr[0] = pBuf[1];
+			KeyStr[1] = pBuf[2];
+			KeyStr[2] = 0;
+
+			/* Find the passed key in the array */
+			for (Index = 0; Index < KeyNo; Index ++) {
+
+				if (SK_STRCMP(KeyStr, KeyArr[Index]) == 0) {
+
+					break;
+				}
+			}
+			/*
+			 * If we cannot find the key it is wrong, so we
+			 * return an appropriate error value.
+			 */
+			if (Index == KeyNo) {
+
+				*pLen = 0;
+				return (SK_PNMI_ERR_BAD_VALUE);
+			}
+
+			if (Action == SK_PNMI_PRESET) {
+
+				return (SK_PNMI_ERR_OK);
+			}
+
+			/* Ok, you wanted it and you will get it */
+			Ret = VpdDelete(pAC, IoC, KeyStr);
+			if (Ret != SK_PNMI_VPD_OK) {
+
+				SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR027,
+					SK_PNMI_ERR027MSG);
+
+				*pLen = 0;
+				return (SK_PNMI_ERR_GENERAL);
+			}
+
+			/*
+			 * Perform an update of the VPD data. This is
+			 * not mandantory, but just to be sure.
+			 */
+			Ret = VpdUpdate(pAC, IoC);
+			if (Ret != SK_PNMI_VPD_OK) {
+
+				SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR028,
+					SK_PNMI_ERR028MSG);
+
+				*pLen = 0;
+				return (SK_PNMI_ERR_GENERAL);
+			}
+			break;
+
+		default:
+			*pLen = 0;
+			return (SK_PNMI_ERR_BAD_VALUE);
+		}
+	}
+
+	return (SK_PNMI_ERR_OK);
+}
+
+/*****************************************************************************
+ *
+ * General - OID handler function of various single instance OIDs
+ *
+ * Description:
+ *	The code is simple. No description necessary.
+ *
+ * Returns:
+ *	SK_PNMI_ERR_OK           The request was successfully performed.
+ *	SK_PNMI_ERR_GENERAL      A general severe internal error occured.
+ *	SK_PNMI_ERR_TOO_SHORT    The passed buffer is too short to contain
+ *	                         the correct data (e.g. a 32bit value is
+ *	                         needed, but a 16 bit value was passed).
+ *	SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't
+ *                           exist (e.g. port instance 3 on a two port
+ *	                         adapter.
+ */
+PNMI_STATIC int General(
+SK_AC *pAC,		/* Pointer to adapter context */
+SK_IOC IoC,		/* IO context handle */
+int Action,		/* GET/PRESET/SET action */
+SK_U32 Id,		/* Object ID that is to be processed */
+char *pBuf,		/* Buffer used for the management data transfer */
+unsigned int *pLen,	/* On call: buffer length. On return: used buffer */
+SK_U32 Instance,	/* Instance (1..n) that is to be queried or -1 */
+unsigned int TableIndex, /* Index to the Id table */
+SK_U32 NetIndex)	/* NetIndex (0..n), in single net mode always zero */
+{
+	int		Ret;
+	unsigned int	Index;
+	unsigned int	Len;
+	unsigned int	Offset;
+	unsigned int	Val;
+	SK_U8		Val8;
+	SK_U16		Val16;
+	SK_U32		Val32;
+	SK_U64		Val64;
+	SK_U64		Val64RxHwErrs = 0;
+	SK_U64		Val64TxHwErrs = 0;
+	SK_BOOL		Is64BitReq = SK_FALSE;
+	char		Buf[256];
+	int			MacType;
+
+	/*
+	 * Check instance. We only handle single instance variables.
+	 */
+	if (Instance != (SK_U32)(-1) && Instance != 1) {
+
+		*pLen = 0;
+		return (SK_PNMI_ERR_UNKNOWN_INST);
+	}
+
+	/*
+	 * Check action. We only allow get requests.
+	 */
+	if (Action != SK_PNMI_GET) {
+
+		*pLen = 0;
+		return (SK_PNMI_ERR_READ_ONLY);
+	}
+	
+	MacType = pAC->GIni.GIMacType;
+	
+	/*
+	 * Check length for the various supported OIDs
+	 */
+	switch (Id) {
+
+	case OID_GEN_XMIT_ERROR:
+	case OID_GEN_RCV_ERROR:
+	case OID_GEN_RCV_NO_BUFFER:
+#ifndef SK_NDIS_64BIT_CTR
+		if (*pLen < sizeof(SK_U32)) {
+			*pLen = sizeof(SK_U32);
+			return (SK_PNMI_ERR_TOO_SHORT);
+		}
+
+#else /* SK_NDIS_64BIT_CTR */
+
+		/*
+		 * for compatibility, at least 32bit are required for oid
+		 */
+		if (*pLen < sizeof(SK_U32)) {
+			/*
+			* but indicate handling for 64bit values,
+			* if insufficient space is provided
+			*/
+			*pLen = sizeof(SK_U64);
+			return (SK_PNMI_ERR_TOO_SHORT);
+		}
+
+		Is64BitReq = (*pLen < sizeof(SK_U64)) ? SK_FALSE : SK_TRUE;
+#endif /* SK_NDIS_64BIT_CTR */
+		break;
+
+	case OID_SKGE_PORT_NUMBER:
+	case OID_SKGE_DEVICE_TYPE:
+	case OID_SKGE_RESULT:
+	case OID_SKGE_RLMT_MONITOR_NUMBER:
+	case OID_GEN_TRANSMIT_QUEUE_LENGTH:
+	case OID_SKGE_TRAP_NUMBER:
+	case OID_SKGE_MDB_VERSION:
+	case OID_SKGE_BOARDLEVEL:
+	case OID_SKGE_CHIPID:
+	case OID_SKGE_RAMSIZE:
+		if (*pLen < sizeof(SK_U32)) {
+
+			*pLen = sizeof(SK_U32);
+			return (SK_PNMI_ERR_TOO_SHORT);
+		}
+		break;
+
+	case OID_SKGE_CHIPSET:
+		if (*pLen < sizeof(SK_U16)) {
+
+			*pLen = sizeof(SK_U16);
+			return (SK_PNMI_ERR_TOO_SHORT);
+		}
+		break;
+
+	case OID_SKGE_BUS_TYPE:
+	case OID_SKGE_BUS_SPEED:
+	case OID_SKGE_BUS_WIDTH:
+	case OID_SKGE_SENSOR_NUMBER:
+	case OID_SKGE_CHKSM_NUMBER:
+	case OID_SKGE_VAUXAVAIL:
+		if (*pLen < sizeof(SK_U8)) {
+
+			*pLen = sizeof(SK_U8);
+			return (SK_PNMI_ERR_TOO_SHORT);
+		}
+		break;
+
+	case OID_SKGE_TX_SW_QUEUE_LEN:
+	case OID_SKGE_TX_SW_QUEUE_MAX:
+	case OID_SKGE_TX_RETRY:
+	case OID_SKGE_RX_INTR_CTS:
+	case OID_SKGE_TX_INTR_CTS:
+	case OID_SKGE_RX_NO_BUF_CTS:
+	case OID_SKGE_TX_NO_BUF_CTS:
+	case OID_SKGE_TX_USED_DESCR_NO:
+	case OID_SKGE_RX_DELIVERED_CTS:
+	case OID_SKGE_RX_OCTETS_DELIV_CTS:
+	case OID_SKGE_RX_HW_ERROR_CTS:
+	case OID_SKGE_TX_HW_ERROR_CTS:
+	case OID_SKGE_IN_ERRORS_CTS:
+	case OID_SKGE_OUT_ERROR_CTS:
+	case OID_SKGE_ERR_RECOVERY_CTS:
+	case OID_SKGE_SYSUPTIME:
+		if (*pLen < sizeof(SK_U64)) {
+
+			*pLen = sizeof(SK_U64);
+			return (SK_PNMI_ERR_TOO_SHORT);
+		}
+		break;
+
+	default:
+		/* Checked later */
+		break;
+	}
+
+	/* Update statistic */
+	if (Id == OID_SKGE_RX_HW_ERROR_CTS ||
+		Id == OID_SKGE_TX_HW_ERROR_CTS ||
+		Id == OID_SKGE_IN_ERRORS_CTS ||
+		Id == OID_SKGE_OUT_ERROR_CTS ||
+		Id == OID_GEN_XMIT_ERROR ||
+		Id == OID_GEN_RCV_ERROR) {
+
+		/* Force the XMAC to update its statistic counters and
+		 * Increment semaphore to indicate that an update was
+		 * already done.
+		 */
+		Ret = MacUpdate(pAC, IoC, 0, pAC->GIni.GIMacsFound - 1);
+		if (Ret != SK_PNMI_ERR_OK) {
+
+			*pLen = 0;
+			return (Ret);
+		}
+		pAC->Pnmi.MacUpdatedFlag ++;
+
+		/*
+		 * Some OIDs consist of multiple hardware counters. Those
+		 * values which are contained in all of them will be added
+		 * now.
+		 */
+		switch (Id) {
+
+		case OID_SKGE_RX_HW_ERROR_CTS:
+		case OID_SKGE_IN_ERRORS_CTS:
+		case OID_GEN_RCV_ERROR:
+			Val64RxHwErrs =
+				GetStatVal(pAC, IoC, 0, SK_PNMI_HRX_MISSED, NetIndex) +
+				GetStatVal(pAC, IoC, 0, SK_PNMI_HRX_FRAMING, NetIndex) +
+				GetStatVal(pAC, IoC, 0, SK_PNMI_HRX_OVERFLOW, NetIndex) +
+				GetStatVal(pAC, IoC, 0, SK_PNMI_HRX_JABBER, NetIndex) +
+				GetStatVal(pAC, IoC, 0, SK_PNMI_HRX_CARRIER, NetIndex) +
+				GetStatVal(pAC, IoC, 0, SK_PNMI_HRX_IRLENGTH, NetIndex) +
+				GetStatVal(pAC, IoC, 0, SK_PNMI_HRX_SYMBOL, NetIndex) +
+				GetStatVal(pAC, IoC, 0, SK_PNMI_HRX_SHORTS, NetIndex) +
+				GetStatVal(pAC, IoC, 0, SK_PNMI_HRX_RUNT, NetIndex) +
+				GetStatVal(pAC, IoC, 0, SK_PNMI_HRX_TOO_LONG, NetIndex) +
+				GetStatVal(pAC, IoC, 0, SK_PNMI_HRX_FCS, NetIndex) +
+				GetStatVal(pAC, IoC, 0, SK_PNMI_HRX_CEXT, NetIndex);
+	        break;
+
+		case OID_SKGE_TX_HW_ERROR_CTS:
+		case OID_SKGE_OUT_ERROR_CTS:
+		case OID_GEN_XMIT_ERROR:
+			Val64TxHwErrs =
+				GetStatVal(pAC, IoC, 0, SK_PNMI_HTX_EXCESS_COL, NetIndex) +
+				GetStatVal(pAC, IoC, 0, SK_PNMI_HTX_LATE_COL, NetIndex) +
+				GetStatVal(pAC, IoC, 0, SK_PNMI_HTX_UNDERRUN, NetIndex) +
+				GetStatVal(pAC, IoC, 0, SK_PNMI_HTX_CARRIER, NetIndex);
+			break;
+		}
+	}
+
+	/*
+	 * Retrieve value
+	 */
+	switch (Id) {
+
+	case OID_SKGE_SUPPORTED_LIST:
+		Len = ID_TABLE_SIZE * sizeof(SK_U32);
+		if (*pLen < Len) {
+
+			*pLen = Len;
+			return (SK_PNMI_ERR_TOO_SHORT);
+		}
+		for (Offset = 0, Index = 0; Offset < Len;
+			Offset += sizeof(SK_U32), Index ++) {
+
+			Val32 = (SK_U32)IdTable[Index].Id;
+			SK_PNMI_STORE_U32(pBuf + Offset, Val32);
+		}
+		*pLen = Len;
+		break;
+
+	case OID_SKGE_BOARDLEVEL:
+		Val32 = (SK_U32)pAC->GIni.GILevel;
+		SK_PNMI_STORE_U32(pBuf, Val32);
+		*pLen = sizeof(SK_U32);
+		break;
+
+	case OID_SKGE_PORT_NUMBER:
+		Val32 = (SK_U32)pAC->GIni.GIMacsFound;
+		SK_PNMI_STORE_U32(pBuf, Val32);
+		*pLen = sizeof(SK_U32);
+		break;
+
+	case OID_SKGE_DEVICE_TYPE:
+		Val32 = (SK_U32)pAC->Pnmi.DeviceType;
+		SK_PNMI_STORE_U32(pBuf, Val32);
+		*pLen = sizeof(SK_U32);
+		break;
+
+	case OID_SKGE_DRIVER_DESCR:
+		if (pAC->Pnmi.pDriverDescription == NULL) {
+
+			SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR007,
+				SK_PNMI_ERR007MSG);
+
+			*pLen = 0;
+			return (SK_PNMI_ERR_GENERAL);
+		}
+
+		Len = SK_STRLEN(pAC->Pnmi.pDriverDescription) + 1;
+		if (Len > SK_PNMI_STRINGLEN1) {
+
+			SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR029,
+				SK_PNMI_ERR029MSG);
+
+			*pLen = 0;
+			return (SK_PNMI_ERR_GENERAL);
+		}
+
+		if (*pLen < Len) {
+
+			*pLen = Len;
+			return (SK_PNMI_ERR_TOO_SHORT);
+		}
+		*pBuf = (char)(Len - 1);
+		SK_MEMCPY(pBuf + 1, pAC->Pnmi.pDriverDescription, Len - 1);
+		*pLen = Len;
+		break;
+
+	case OID_SKGE_DRIVER_VERSION:
+		if (pAC->Pnmi.pDriverVersion == NULL) {
+
+			SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR030,
+				SK_PNMI_ERR030MSG);
+
+			*pLen = 0;
+			return (SK_PNMI_ERR_GENERAL);
+		}
+
+		Len = SK_STRLEN(pAC->Pnmi.pDriverVersion) + 1;
+		if (Len > SK_PNMI_STRINGLEN1) {
+
+			SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR031,
+				SK_PNMI_ERR031MSG);
+
+			*pLen = 0;
+			return (SK_PNMI_ERR_GENERAL);
+		}
+
+		if (*pLen < Len) {
+
+			*pLen = Len;
+			return (SK_PNMI_ERR_TOO_SHORT);
+		}
+		*pBuf = (char)(Len - 1);
+		SK_MEMCPY(pBuf + 1, pAC->Pnmi.pDriverVersion, Len - 1);
+		*pLen = Len;
+		break;
+
+	case OID_SKGE_DRIVER_RELDATE:
+		if (pAC->Pnmi.pDriverReleaseDate == NULL) {
+
+			SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR030,
+				SK_PNMI_ERR053MSG);
+
+			*pLen = 0;
+			return (SK_PNMI_ERR_GENERAL);
+		}
+
+		Len = SK_STRLEN(pAC->Pnmi.pDriverReleaseDate) + 1;
+		if (Len > SK_PNMI_STRINGLEN1) {
+
+			SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR031,
+				SK_PNMI_ERR054MSG);
+
+			*pLen = 0;
+			return (SK_PNMI_ERR_GENERAL);
+		}
+
+		if (*pLen < Len) {
+
+			*pLen = Len;
+			return (SK_PNMI_ERR_TOO_SHORT);
+		}
+		*pBuf = (char)(Len - 1);
+		SK_MEMCPY(pBuf + 1, pAC->Pnmi.pDriverReleaseDate, Len - 1);
+		*pLen = Len;
+		break;
+
+	case OID_SKGE_DRIVER_FILENAME:
+		if (pAC->Pnmi.pDriverFileName == NULL) {
+
+			SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR030,
+				SK_PNMI_ERR055MSG);
+
+			*pLen = 0;
+			return (SK_PNMI_ERR_GENERAL);
+		}
+
+		Len = SK_STRLEN(pAC->Pnmi.pDriverFileName) + 1;
+		if (Len > SK_PNMI_STRINGLEN1) {
+
+			SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR031,
+				SK_PNMI_ERR056MSG);
+
+			*pLen = 0;
+			return (SK_PNMI_ERR_GENERAL);
+		}
+
+		if (*pLen < Len) {
+
+			*pLen = Len;
+			return (SK_PNMI_ERR_TOO_SHORT);
+		}
+		*pBuf = (char)(Len - 1);
+		SK_MEMCPY(pBuf + 1, pAC->Pnmi.pDriverFileName, Len - 1);
+		*pLen = Len;
+		break;
+
+	case OID_SKGE_HW_DESCR:
+		/*
+		 * The hardware description is located in the VPD. This
+		 * query may move to the initialisation routine. But
+		 * the VPD data is cached and therefore a call here
+		 * will not make much difference.
+		 */
+		Len = 256;
+		if (VpdRead(pAC, IoC, VPD_NAME, Buf, (int *)&Len) > 0) {
+
+			SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR032,
+				SK_PNMI_ERR032MSG);
+
+			*pLen = 0;
+			return (SK_PNMI_ERR_GENERAL);
+		}
+		Len ++;
+		if (Len > SK_PNMI_STRINGLEN1) {
+
+			SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR033,
+				SK_PNMI_ERR033MSG);
+
+			*pLen = 0;
+			return (SK_PNMI_ERR_GENERAL);
+		}
+		if (*pLen < Len) {
+
+			*pLen = Len;
+			return (SK_PNMI_ERR_TOO_SHORT);
+		}
+		*pBuf = (char)(Len - 1);
+		SK_MEMCPY(pBuf + 1, Buf, Len - 1);
+		*pLen = Len;
+		break;
+
+	case OID_SKGE_HW_VERSION:
+		/* Oh, I love to do some string manipulation */
+		if (*pLen < 5) {
+
+			*pLen = 5;
+			return (SK_PNMI_ERR_TOO_SHORT);
+		}
+		Val8 = (SK_U8)pAC->GIni.GIPciHwRev;
+		pBuf[0] = 4;
+		pBuf[1] = 'v';
+		pBuf[2] = (char)(0x30 | ((Val8 >> 4) & 0x0F));
+		pBuf[3] = '.';
+		pBuf[4] = (char)(0x30 | (Val8 & 0x0F));
+		*pLen = 5;
+		break;
+
+	case OID_SKGE_CHIPSET:
+		Val16 = pAC->Pnmi.Chipset;
+		SK_PNMI_STORE_U16(pBuf, Val16);
+		*pLen = sizeof(SK_U16);
+		break;
+
+	case OID_SKGE_CHIPID:
+		Val32 = pAC->GIni.GIChipId;
+		SK_PNMI_STORE_U32(pBuf, Val32);
+		*pLen = sizeof(SK_U32);
+		break;
+
+	case OID_SKGE_RAMSIZE:
+		Val32 = pAC->GIni.GIRamSize;
+		SK_PNMI_STORE_U32(pBuf, Val32);
+		*pLen = sizeof(SK_U32);
+		break;
+
+	case OID_SKGE_VAUXAVAIL:
+		*pBuf = (char) pAC->GIni.GIVauxAvail;
+		*pLen = sizeof(char);
+		break;
+
+	case OID_SKGE_BUS_TYPE:
+		*pBuf = (char) SK_PNMI_BUS_PCI;
+		*pLen = sizeof(char);
+		break;
+
+	case OID_SKGE_BUS_SPEED:
+		*pBuf = pAC->Pnmi.PciBusSpeed;
+		*pLen = sizeof(char);
+		break;
+
+	case OID_SKGE_BUS_WIDTH:
+		*pBuf = pAC->Pnmi.PciBusWidth;
+		*pLen = sizeof(char);
+		break;
+
+	case OID_SKGE_RESULT:
+		Val32 = pAC->Pnmi.TestResult;
+		SK_PNMI_STORE_U32(pBuf, Val32);
+		*pLen = sizeof(SK_U32);
+		break;
+
+	case OID_SKGE_SENSOR_NUMBER:
+		*pBuf = (char)pAC->I2c.MaxSens;
+		*pLen = sizeof(char);
+		break;
+
+	case OID_SKGE_CHKSM_NUMBER:
+		*pBuf = SKCS_NUM_PROTOCOLS;
+		*pLen = sizeof(char);
+		break;
+
+	case OID_SKGE_TRAP_NUMBER:
+		GetTrapQueueLen(pAC, &Len, &Val);
+		Val32 = (SK_U32)Val;
+		SK_PNMI_STORE_U32(pBuf, Val32);
+		*pLen = sizeof(SK_U32);
+		break;
+
+	case OID_SKGE_TRAP:
+		GetTrapQueueLen(pAC, &Len, &Val);
+		if (*pLen < Len) {
+
+			*pLen = Len;
+			return (SK_PNMI_ERR_TOO_SHORT);
+		}
+		CopyTrapQueue(pAC, pBuf);
+		*pLen = Len;
+		break;
+
+	case OID_SKGE_RLMT_MONITOR_NUMBER:
+/* XXX Not yet implemented by RLMT therefore we return zero elements */
+		Val32 = 0;
+		SK_PNMI_STORE_U32(pBuf, Val32);
+		*pLen = sizeof(SK_U32);
+		break;
+
+	case OID_SKGE_TX_SW_QUEUE_LEN:
+		/* 2002-09-17 pweber: For XMAC, use the frozen SW counters (BufPort) */
+		if (MacType == SK_MAC_XMAC) {
+			/* Dual net mode */
+			if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) {
+				Val64 = pAC->Pnmi.BufPort[NetIndex].TxSwQueueLen;
+			}
+			/* Single net mode */
+			else {
+				Val64 = pAC->Pnmi.BufPort[0].TxSwQueueLen +
+					pAC->Pnmi.BufPort[1].TxSwQueueLen;
+			}			
+		}
+		else {
+			/* Dual net mode */
+			if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) {
+				Val64 = pAC->Pnmi.Port[NetIndex].TxSwQueueLen;
+			}
+			/* Single net mode */
+			else {
+				Val64 = pAC->Pnmi.Port[0].TxSwQueueLen +
+					pAC->Pnmi.Port[1].TxSwQueueLen;
+			}			
+		}
+		SK_PNMI_STORE_U64(pBuf, Val64);
+		*pLen = sizeof(SK_U64);
+		break;
+
+
+	case OID_SKGE_TX_SW_QUEUE_MAX:
+		/* 2002-09-17 pweber: For XMAC, use the frozen SW counters (BufPort) */
+		if (MacType == SK_MAC_XMAC) {
+			/* Dual net mode */
+			if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) {
+				Val64 = pAC->Pnmi.BufPort[NetIndex].TxSwQueueMax;
+			}
+			/* Single net mode */
+			else {
+				Val64 = pAC->Pnmi.BufPort[0].TxSwQueueMax +
+					pAC->Pnmi.BufPort[1].TxSwQueueMax;
+			}
+		}
+		else {
+			/* Dual net mode */
+			if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) {
+				Val64 = pAC->Pnmi.Port[NetIndex].TxSwQueueMax;
+			}
+			/* Single net mode */
+			else {
+				Val64 = pAC->Pnmi.Port[0].TxSwQueueMax +
+					pAC->Pnmi.Port[1].TxSwQueueMax;
+			}
+		}
+		SK_PNMI_STORE_U64(pBuf, Val64);
+		*pLen = sizeof(SK_U64);
+		break;
+
+	case OID_SKGE_TX_RETRY:
+		/* 2002-09-17 pweber: For XMAC, use the frozen SW counters (BufPort) */
+		if (MacType == SK_MAC_XMAC) {
+			/* Dual net mode */
+			if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) {
+				Val64 = pAC->Pnmi.BufPort[NetIndex].TxRetryCts;
+			}
+			/* Single net mode */
+			else {
+				Val64 = pAC->Pnmi.BufPort[0].TxRetryCts +
+					pAC->Pnmi.BufPort[1].TxRetryCts;
+			}
+		}
+		else {
+			/* Dual net mode */
+			if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) {
+				Val64 = pAC->Pnmi.Port[NetIndex].TxRetryCts;
+			}
+			/* Single net mode */
+			else {
+				Val64 = pAC->Pnmi.Port[0].TxRetryCts +
+					pAC->Pnmi.Port[1].TxRetryCts;
+			}
+		}
+		SK_PNMI_STORE_U64(pBuf, Val64);
+		*pLen = sizeof(SK_U64);
+		break;
+
+	case OID_SKGE_RX_INTR_CTS:
+		/* 2002-09-17 pweber: For XMAC, use the frozen SW counters (BufPort) */
+		if (MacType == SK_MAC_XMAC) {
+			/* Dual net mode */
+			if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) {
+				Val64 = pAC->Pnmi.BufPort[NetIndex].RxIntrCts;
+			}
+			/* Single net mode */
+			else {
+				Val64 = pAC->Pnmi.BufPort[0].RxIntrCts +
+					pAC->Pnmi.BufPort[1].RxIntrCts;
+			}
+		}
+		else {
+			/* Dual net mode */
+			if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) {
+				Val64 = pAC->Pnmi.Port[NetIndex].RxIntrCts;
+			}
+			/* Single net mode */
+			else {
+				Val64 = pAC->Pnmi.Port[0].RxIntrCts +
+					pAC->Pnmi.Port[1].RxIntrCts;
+			}
+		}
+		SK_PNMI_STORE_U64(pBuf, Val64);
+		*pLen = sizeof(SK_U64);
+		break;
+
+	case OID_SKGE_TX_INTR_CTS:
+		/* 2002-09-17 pweber: For XMAC, use the frozen SW counters (BufPort) */
+		if (MacType == SK_MAC_XMAC) {
+			/* Dual net mode */
+			if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) {
+				Val64 = pAC->Pnmi.BufPort[NetIndex].TxIntrCts;
+			}
+			/* Single net mode */
+			else {
+				Val64 = pAC->Pnmi.BufPort[0].TxIntrCts +
+					pAC->Pnmi.BufPort[1].TxIntrCts;
+			}
+		}
+		else {
+			/* Dual net mode */
+			if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) {
+				Val64 = pAC->Pnmi.Port[NetIndex].TxIntrCts;
+			}
+			/* Single net mode */
+			else {
+				Val64 = pAC->Pnmi.Port[0].TxIntrCts +
+					pAC->Pnmi.Port[1].TxIntrCts;
+			}
+		}
+		SK_PNMI_STORE_U64(pBuf, Val64);
+		*pLen = sizeof(SK_U64);
+		break;
+
+	case OID_SKGE_RX_NO_BUF_CTS:
+		/* 2002-09-17 pweber: For XMAC, use the frozen SW counters (BufPort) */
+		if (MacType == SK_MAC_XMAC) {
+			/* Dual net mode */
+			if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) {
+				Val64 = pAC->Pnmi.BufPort[NetIndex].RxNoBufCts;
+			}
+			/* Single net mode */
+			else {
+				Val64 = pAC->Pnmi.BufPort[0].RxNoBufCts +
+					pAC->Pnmi.BufPort[1].RxNoBufCts;
+			}
+		}
+		else {
+			/* Dual net mode */
+			if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) {
+				Val64 = pAC->Pnmi.Port[NetIndex].RxNoBufCts;
+			}
+			/* Single net mode */
+			else {
+				Val64 = pAC->Pnmi.Port[0].RxNoBufCts +
+					pAC->Pnmi.Port[1].RxNoBufCts;
+			}
+		}
+		SK_PNMI_STORE_U64(pBuf, Val64);
+		*pLen = sizeof(SK_U64);
+		break;
+
+	case OID_SKGE_TX_NO_BUF_CTS:
+		/* 2002-09-17 pweber: For XMAC, use the frozen SW counters (BufPort) */
+		if (MacType == SK_MAC_XMAC) {
+			/* Dual net mode */
+			if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) {
+				Val64 = pAC->Pnmi.BufPort[NetIndex].TxNoBufCts;
+			}
+			/* Single net mode */
+			else {
+				Val64 = pAC->Pnmi.BufPort[0].TxNoBufCts +
+					pAC->Pnmi.BufPort[1].TxNoBufCts;
+			}
+		}
+		else {
+			/* Dual net mode */
+			if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) {
+				Val64 = pAC->Pnmi.Port[NetIndex].TxNoBufCts;
+			}
+			/* Single net mode */
+			else {
+				Val64 = pAC->Pnmi.Port[0].TxNoBufCts +
+					pAC->Pnmi.Port[1].TxNoBufCts;
+			}
+		}
+		SK_PNMI_STORE_U64(pBuf, Val64);
+		*pLen = sizeof(SK_U64);
+		break;
+
+	case OID_SKGE_TX_USED_DESCR_NO:
+		/* 2002-09-17 pweber: For XMAC, use the frozen SW counters (BufPort) */
+		if (MacType == SK_MAC_XMAC) {
+			/* Dual net mode */
+			if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) {
+				Val64 = pAC->Pnmi.BufPort[NetIndex].TxUsedDescrNo;
+			}
+			/* Single net mode */
+			else {
+				Val64 = pAC->Pnmi.BufPort[0].TxUsedDescrNo +
+					pAC->Pnmi.BufPort[1].TxUsedDescrNo;
+			}
+		}
+		else {
+			/* Dual net mode */
+			if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) {
+				Val64 = pAC->Pnmi.Port[NetIndex].TxUsedDescrNo;
+			}
+			/* Single net mode */
+			else {
+				Val64 = pAC->Pnmi.Port[0].TxUsedDescrNo +
+					pAC->Pnmi.Port[1].TxUsedDescrNo;
+			}
+		}
+		SK_PNMI_STORE_U64(pBuf, Val64);
+		*pLen = sizeof(SK_U64);
+		break;
+
+	case OID_SKGE_RX_DELIVERED_CTS:
+		/* 2002-09-17 pweber: For XMAC, use the frozen SW counters (BufPort) */
+		if (MacType == SK_MAC_XMAC) {
+			/* Dual net mode */
+			if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) {
+				Val64 = pAC->Pnmi.BufPort[NetIndex].RxDeliveredCts;
+			}
+			/* Single net mode */
+			else {
+				Val64 = pAC->Pnmi.BufPort[0].RxDeliveredCts +
+					pAC->Pnmi.BufPort[1].RxDeliveredCts;
+			}
+		}
+		else {
+			/* Dual net mode */
+			if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) {
+				Val64 = pAC->Pnmi.Port[NetIndex].RxDeliveredCts;
+			}
+			/* Single net mode */
+			else {
+				Val64 = pAC->Pnmi.Port[0].RxDeliveredCts +
+					pAC->Pnmi.Port[1].RxDeliveredCts;
+			}
+		}
+		SK_PNMI_STORE_U64(pBuf, Val64);
+		*pLen = sizeof(SK_U64);
+		break;
+
+	case OID_SKGE_RX_OCTETS_DELIV_CTS:
+		/* 2002-09-17 pweber: For XMAC, use the frozen SW counters (BufPort) */
+		if (MacType == SK_MAC_XMAC) {
+			/* Dual net mode */
+			if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) {
+				Val64 = pAC->Pnmi.BufPort[NetIndex].RxOctetsDeliveredCts;
+			}
+			/* Single net mode */
+			else {
+				Val64 = pAC->Pnmi.BufPort[0].RxOctetsDeliveredCts +
+					pAC->Pnmi.BufPort[1].RxOctetsDeliveredCts;
+			}
+		}
+		else {
+			/* Dual net mode */
+			if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) {
+				Val64 = pAC->Pnmi.Port[NetIndex].RxOctetsDeliveredCts;
+			}
+			/* Single net mode */
+			else {
+				Val64 = pAC->Pnmi.Port[0].RxOctetsDeliveredCts +
+					pAC->Pnmi.Port[1].RxOctetsDeliveredCts;
+			}
+		}
+		SK_PNMI_STORE_U64(pBuf, Val64);
+		*pLen = sizeof(SK_U64);
+		break;
+
+	case OID_SKGE_RX_HW_ERROR_CTS:
+		SK_PNMI_STORE_U64(pBuf, Val64RxHwErrs);
+		*pLen = sizeof(SK_U64);
+		break;
+
+	case OID_SKGE_TX_HW_ERROR_CTS:
+		SK_PNMI_STORE_U64(pBuf, Val64TxHwErrs);
+		*pLen = sizeof(SK_U64);
+		break;
+
+	case OID_SKGE_IN_ERRORS_CTS:
+		/* 2002-09-17 pweber: For XMAC, use the frozen SW counters (BufPort) */
+		if (MacType == SK_MAC_XMAC) {
+			/* Dual net mode */
+			if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) {
+				Val64 = Val64RxHwErrs + pAC->Pnmi.BufPort[NetIndex].RxNoBufCts;
+			}
+			/* Single net mode */
+			else {
+				Val64 = Val64RxHwErrs +
+					pAC->Pnmi.BufPort[0].RxNoBufCts +
+					pAC->Pnmi.BufPort[1].RxNoBufCts;
+			}
+		}
+		else {
+			/* Dual net mode */
+			if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) {
+				Val64 = Val64RxHwErrs + pAC->Pnmi.Port[NetIndex].RxNoBufCts;
+			}
+			/* Single net mode */
+			else {
+				Val64 = Val64RxHwErrs +
+					pAC->Pnmi.Port[0].RxNoBufCts +
+					pAC->Pnmi.Port[1].RxNoBufCts;
+			}
+		}
+		SK_PNMI_STORE_U64(pBuf, Val64);
+		*pLen = sizeof(SK_U64);
+		break;
+
+	case OID_SKGE_OUT_ERROR_CTS:
+		/* 2002-09-17 pweber: For XMAC, use the frozen SW counters (BufPort) */
+		if (MacType == SK_MAC_XMAC) {
+			/* Dual net mode */
+			if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) {
+				Val64 = Val64TxHwErrs + pAC->Pnmi.BufPort[NetIndex].TxNoBufCts;
+			}
+			/* Single net mode */
+			else {
+				Val64 = Val64TxHwErrs +
+					pAC->Pnmi.BufPort[0].TxNoBufCts +
+					pAC->Pnmi.BufPort[1].TxNoBufCts;
+			}
+		}
+		else {
+			/* Dual net mode */
+			if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) {
+				Val64 = Val64TxHwErrs + pAC->Pnmi.Port[NetIndex].TxNoBufCts;
+			}
+			/* Single net mode */
+			else {
+				Val64 = Val64TxHwErrs +
+					pAC->Pnmi.Port[0].TxNoBufCts +
+					pAC->Pnmi.Port[1].TxNoBufCts;
+			}
+		}
+		SK_PNMI_STORE_U64(pBuf, Val64);
+		*pLen = sizeof(SK_U64);
+		break;
+
+	case OID_SKGE_ERR_RECOVERY_CTS:
+		/* 2002-09-17 pweber: For XMAC, use the frozen SW counters (BufPort) */
+		if (MacType == SK_MAC_XMAC) {
+			/* Dual net mode */
+			if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) {
+				Val64 = pAC->Pnmi.BufPort[NetIndex].ErrRecoveryCts;
+			}
+			/* Single net mode */
+			else {
+				Val64 = pAC->Pnmi.BufPort[0].ErrRecoveryCts +
+					pAC->Pnmi.BufPort[1].ErrRecoveryCts;
+			}
+		}
+		else {
+			/* Dual net mode */
+			if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) {
+				Val64 = pAC->Pnmi.Port[NetIndex].ErrRecoveryCts;
+			}
+			/* Single net mode */
+			else {
+				Val64 = pAC->Pnmi.Port[0].ErrRecoveryCts +
+					pAC->Pnmi.Port[1].ErrRecoveryCts;
+			}
+		}
+		SK_PNMI_STORE_U64(pBuf, Val64);
+		*pLen = sizeof(SK_U64);
+		break;
+
+	case OID_SKGE_SYSUPTIME:
+		Val64 = SK_PNMI_HUNDREDS_SEC(SkOsGetTime(pAC));
+		Val64 -= pAC->Pnmi.StartUpTime;
+		SK_PNMI_STORE_U64(pBuf, Val64);
+		*pLen = sizeof(SK_U64);
+		break;
+
+	case OID_SKGE_MDB_VERSION:
+		Val32 = SK_PNMI_MDB_VERSION;
+		SK_PNMI_STORE_U32(pBuf, Val32);
+		*pLen = sizeof(SK_U32);
+		break;
+
+	case OID_GEN_RCV_ERROR:
+		/* 2002-09-17 pweber: For XMAC, use the frozen SW counters (BufPort) */
+		if (MacType == SK_MAC_XMAC) {
+			Val64 = Val64RxHwErrs + pAC->Pnmi.BufPort[NetIndex].RxNoBufCts;
+		}
+		else {
+			Val64 = Val64RxHwErrs + pAC->Pnmi.Port[NetIndex].RxNoBufCts;
+		}
+
+		/*
+		 * by default 32bit values are evaluated
+		 */
+		if (!Is64BitReq) {
+			Val32 = (SK_U32)Val64;
+			SK_PNMI_STORE_U32(pBuf, Val32);
+			*pLen = sizeof(SK_U32);
+		}
+		else {
+			SK_PNMI_STORE_U64(pBuf, Val64);
+			*pLen = sizeof(SK_U64);
+		}
+		break;
+
+	case OID_GEN_XMIT_ERROR:
+		/* 2002-09-17 pweber: For XMAC, use the frozen SW counters (BufPort) */
+		if (MacType == SK_MAC_XMAC) {
+			Val64 = Val64TxHwErrs + pAC->Pnmi.BufPort[NetIndex].TxNoBufCts;
+		}
+		else {
+			Val64 = Val64TxHwErrs + pAC->Pnmi.Port[NetIndex].TxNoBufCts;
+		}
+
+		/*
+		 * by default 32bit values are evaluated
+		 */
+		if (!Is64BitReq) {
+			Val32 = (SK_U32)Val64;
+			SK_PNMI_STORE_U32(pBuf, Val32);
+			*pLen = sizeof(SK_U32);
+		}
+		else {
+			SK_PNMI_STORE_U64(pBuf, Val64);
+			*pLen = sizeof(SK_U64);
+		}
+		break;
+
+	case OID_GEN_RCV_NO_BUFFER:
+		/* 2002-09-17 pweber: For XMAC, use the frozen SW counters (BufPort) */
+		if (MacType == SK_MAC_XMAC) {
+			Val64 = pAC->Pnmi.BufPort[NetIndex].RxNoBufCts;
+		}
+		else {
+			Val64 = pAC->Pnmi.Port[NetIndex].RxNoBufCts;
+		}
+
+		/*
+		 * by default 32bit values are evaluated
+		 */
+		if (!Is64BitReq) {
+			Val32 = (SK_U32)Val64;
+			SK_PNMI_STORE_U32(pBuf, Val32);
+			*pLen = sizeof(SK_U32);
+		}
+		else {
+			SK_PNMI_STORE_U64(pBuf, Val64);
+			*pLen = sizeof(SK_U64);
+		}
+		break;
+
+	case OID_GEN_TRANSMIT_QUEUE_LENGTH:
+		Val32 = (SK_U32)pAC->Pnmi.Port[NetIndex].TxSwQueueLen;
+		SK_PNMI_STORE_U32(pBuf, Val32);
+		*pLen = sizeof(SK_U32);
+		break;
+
+	default:
+		SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR034,
+			SK_PNMI_ERR034MSG);
+
+		*pLen = 0;
+		return (SK_PNMI_ERR_GENERAL);
+	}
+
+	if (Id == OID_SKGE_RX_HW_ERROR_CTS ||
+		Id == OID_SKGE_TX_HW_ERROR_CTS ||
+		Id == OID_SKGE_IN_ERRORS_CTS ||
+		Id == OID_SKGE_OUT_ERROR_CTS ||
+		Id == OID_GEN_XMIT_ERROR ||
+		Id == OID_GEN_RCV_ERROR) {
+
+		pAC->Pnmi.MacUpdatedFlag --;
+	}
+
+	return (SK_PNMI_ERR_OK);
+}
+
+/*****************************************************************************
+ *
+ * Rlmt - OID handler function of OID_SKGE_RLMT_XXX single instance.
+ *
+ * Description:
+ *	Get/Presets/Sets the RLMT OIDs.
+ *
+ * Returns:
+ *	SK_PNMI_ERR_OK           The request was successfully performed.
+ *	SK_PNMI_ERR_GENERAL      A general severe internal error occured.
+ *	SK_PNMI_ERR_TOO_SHORT    The passed buffer is too short to contain
+ *	                         the correct data (e.g. a 32bit value is
+ *	                         needed, but a 16 bit value was passed).
+ *	SK_PNMI_ERR_BAD_VALUE    The passed value is not in the valid
+ *	                         value range.
+ *	SK_PNMI_ERR_READ_ONLY    The OID is read-only and cannot be set.
+ *	SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't
+ *                           exist (e.g. port instance 3 on a two port
+ *	                         adapter.
+ */
+PNMI_STATIC int Rlmt(
+SK_AC *pAC,		/* Pointer to adapter context */
+SK_IOC IoC,		/* IO context handle */
+int Action,		/* GET/PRESET/SET action */
+SK_U32 Id,		/* Object ID that is to be processed */
+char *pBuf,		/* Buffer used for the management data transfer */
+unsigned int *pLen,	/* On call: pBuf buffer length. On return: used buffer */
+SK_U32 Instance,	/* Instance (1..n) that is to be queried or -1 */
+unsigned int TableIndex, /* Index to the Id table */
+SK_U32 NetIndex)	/* NetIndex (0..n), in single net mode always zero */
+{
+	int		Ret;
+	unsigned int	PhysPortIndex;
+	unsigned int	PhysPortMax;
+	SK_EVPARA	EventParam;
+	SK_U32		Val32;
+	SK_U64		Val64;
+
+
+	/*
+	 * Check instance. Only single instance OIDs are allowed here.
+	 */
+	if (Instance != (SK_U32)(-1) && Instance != 1) {
+
+		*pLen = 0;
+		return (SK_PNMI_ERR_UNKNOWN_INST);
+	}
+
+	/*
+	 * Perform the requested action.
+	 */
+	if (Action == SK_PNMI_GET) {
+
+		/*
+		 * Check if the buffer length is large enough.
+		 */
+
+		switch (Id) {
+
+		case OID_SKGE_RLMT_MODE:
+		case OID_SKGE_RLMT_PORT_ACTIVE:
+		case OID_SKGE_RLMT_PORT_PREFERRED:
+			if (*pLen < sizeof(SK_U8)) {
+
+				*pLen = sizeof(SK_U8);
+				return (SK_PNMI_ERR_TOO_SHORT);
+			}
+			break;
+
+		case OID_SKGE_RLMT_PORT_NUMBER:
+			if (*pLen < sizeof(SK_U32)) {
+
+				*pLen = sizeof(SK_U32);
+				return (SK_PNMI_ERR_TOO_SHORT);
+			}
+			break;
+
+		case OID_SKGE_RLMT_CHANGE_CTS:
+		case OID_SKGE_RLMT_CHANGE_TIME:
+		case OID_SKGE_RLMT_CHANGE_ESTIM:
+		case OID_SKGE_RLMT_CHANGE_THRES:
+			if (*pLen < sizeof(SK_U64)) {
+
+				*pLen = sizeof(SK_U64);
+				return (SK_PNMI_ERR_TOO_SHORT);
+			}
+			break;
+
+		default:
+			SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR035,
+				SK_PNMI_ERR035MSG);
+
+			*pLen = 0;
+			return (SK_PNMI_ERR_GENERAL);
+		}
+
+		/*
+		 * Update RLMT statistic and increment semaphores to indicate
+		 * that an update was already done. Maybe RLMT will hold its
+		 * statistic always up to date some time. Then we can
+		 * remove this type of call.
+		 */
+		if ((Ret = RlmtUpdate(pAC, IoC, NetIndex)) != SK_PNMI_ERR_OK) {
+
+			*pLen = 0;
+			return (Ret);
+		}
+		pAC->Pnmi.RlmtUpdatedFlag ++;
+
+		/*
+		 * Retrieve Value
+		*/
+		switch (Id) {
+
+		case OID_SKGE_RLMT_MODE:
+			*pBuf = (char)pAC->Rlmt.Net[0].RlmtMode;
+			*pLen = sizeof(char);
+			break;
+
+		case OID_SKGE_RLMT_PORT_NUMBER:
+			Val32 = (SK_U32)pAC->GIni.GIMacsFound;
+			SK_PNMI_STORE_U32(pBuf, Val32);
+			*pLen = sizeof(SK_U32);
+			break;
+
+		case OID_SKGE_RLMT_PORT_ACTIVE:
+			*pBuf = 0;
+			/*
+			 * If multiple ports may become active this OID
+			 * doesn't make sense any more. A new variable in
+			 * the port structure should be created. However,
+			 * for this variable the first active port is
+			 * returned.
+			 */
+			PhysPortMax = pAC->GIni.GIMacsFound;
+
+			for (PhysPortIndex = 0; PhysPortIndex < PhysPortMax;
+				PhysPortIndex ++) {
+
+				if (pAC->Pnmi.Port[PhysPortIndex].ActiveFlag) {
+
+					*pBuf = (char)SK_PNMI_PORT_PHYS2LOG(PhysPortIndex);
+					break;
+				}
+			}
+			*pLen = sizeof(char);
+			break;
+
+		case OID_SKGE_RLMT_PORT_PREFERRED:
+			*pBuf = (char)SK_PNMI_PORT_PHYS2LOG(pAC->Rlmt.Net[NetIndex].Preference);
+			*pLen = sizeof(char);
+			break;
+
+		case OID_SKGE_RLMT_CHANGE_CTS:
+			Val64 = pAC->Pnmi.RlmtChangeCts;
+			SK_PNMI_STORE_U64(pBuf, Val64);
+			*pLen = sizeof(SK_U64);
+			break;
+
+		case OID_SKGE_RLMT_CHANGE_TIME:
+			Val64 = pAC->Pnmi.RlmtChangeTime;
+			SK_PNMI_STORE_U64(pBuf, Val64);
+			*pLen = sizeof(SK_U64);
+			break;
+
+		case OID_SKGE_RLMT_CHANGE_ESTIM:
+			Val64 = pAC->Pnmi.RlmtChangeEstimate.Estimate;
+			SK_PNMI_STORE_U64(pBuf, Val64);
+			*pLen = sizeof(SK_U64);
+			break;
+
+		case OID_SKGE_RLMT_CHANGE_THRES:
+			Val64 = pAC->Pnmi.RlmtChangeThreshold;
+			SK_PNMI_STORE_U64(pBuf, Val64);
+			*pLen = sizeof(SK_U64);
+			break;
+
+		default:
+			SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_ERR,
+				("Rlmt: Unknown OID should be handled before"));
+
+			pAC->Pnmi.RlmtUpdatedFlag --;
+			*pLen = 0;
+			return (SK_PNMI_ERR_GENERAL);
+		}
+
+		pAC->Pnmi.RlmtUpdatedFlag --;
+	}
+	else {
+		/* Perform a preset or set */
+		switch (Id) {
+
+		case OID_SKGE_RLMT_MODE:
+			/* Check if the buffer length is plausible */
+			if (*pLen < sizeof(char)) {
+
+				*pLen = sizeof(char);
+				return (SK_PNMI_ERR_TOO_SHORT);
+			}
+			/* Check if the value range is correct */
+			if (*pLen != sizeof(char) ||
+				(*pBuf & SK_PNMI_RLMT_MODE_CHK_LINK) == 0 ||
+				*(SK_U8 *)pBuf > 15) {
+
+				*pLen = 0;
+				return (SK_PNMI_ERR_BAD_VALUE);
+			}
+			/* The preset ends here */
+			if (Action == SK_PNMI_PRESET) {
+
+				*pLen = 0;
+				return (SK_PNMI_ERR_OK);
+			}
+			/* Send an event to RLMT to change the mode */
+			SK_MEMSET((char *)&EventParam, 0, sizeof(EventParam));
+			EventParam.Para32[0] |= (SK_U32)(*pBuf);
+			EventParam.Para32[1] = 0;
+			if (SkRlmtEvent(pAC, IoC, SK_RLMT_MODE_CHANGE,
+				EventParam) > 0) {
+
+				SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR037,
+					SK_PNMI_ERR037MSG);
+
+				*pLen = 0;
+				return (SK_PNMI_ERR_GENERAL);
+			}
+			break;
+
+		case OID_SKGE_RLMT_PORT_PREFERRED:
+			/* Check if the buffer length is plausible */
+			if (*pLen < sizeof(char)) {
+
+				*pLen = sizeof(char);
+				return (SK_PNMI_ERR_TOO_SHORT);
+			}
+			/* Check if the value range is correct */
+			if (*pLen != sizeof(char) || *(SK_U8 *)pBuf >
+				(SK_U8)pAC->GIni.GIMacsFound) {
+
+				*pLen = 0;
+				return (SK_PNMI_ERR_BAD_VALUE);
+			}
+			/* The preset ends here */
+			if (Action == SK_PNMI_PRESET) {
+
+				*pLen = 0;
+				return (SK_PNMI_ERR_OK);
+			}
+
+			/*
+			 * Send an event to RLMT change the preferred port.
+			 * A param of -1 means automatic mode. RLMT will
+			 * make the decision which is the preferred port.
+			 */
+			SK_MEMSET((char *)&EventParam, 0, sizeof(EventParam));
+			EventParam.Para32[0] = (SK_U32)(*pBuf) - 1;
+			EventParam.Para32[1] = NetIndex;
+			if (SkRlmtEvent(pAC, IoC, SK_RLMT_PREFPORT_CHANGE,
+				EventParam) > 0) {
+
+				SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR038,
+					SK_PNMI_ERR038MSG);
+
+				*pLen = 0;
+				return (SK_PNMI_ERR_GENERAL);
+			}
+			break;
+
+		case OID_SKGE_RLMT_CHANGE_THRES:
+			/* Check if the buffer length is plausible */
+			if (*pLen < sizeof(SK_U64)) {
+
+				*pLen = sizeof(SK_U64);
+				return (SK_PNMI_ERR_TOO_SHORT);
+			}
+			/*
+			 * There are not many restrictions to the
+			 * value range.
+			 */
+			if (*pLen != sizeof(SK_U64)) {
+
+				*pLen = 0;
+				return (SK_PNMI_ERR_BAD_VALUE);
+			}
+			/* A preset ends here */
+			if (Action == SK_PNMI_PRESET) {
+
+				*pLen = 0;
+				return (SK_PNMI_ERR_OK);
+			}
+			/*
+			 * Store the new threshold, which will be taken
+			 * on the next timer event.
+			 */
+			SK_PNMI_READ_U64(pBuf, Val64);
+			pAC->Pnmi.RlmtChangeThreshold = Val64;
+			break;
+
+		default:
+			/* The other OIDs are not be able for set */
+			*pLen = 0;
+			return (SK_PNMI_ERR_READ_ONLY);
+		}
+	}
+
+	return (SK_PNMI_ERR_OK);
+}
+
+/*****************************************************************************
+ *
+ * RlmtStat - OID handler function of OID_SKGE_RLMT_XXX multiple instance.
+ *
+ * Description:
+ *	Performs get requests on multiple instance variables.
+ *
+ * Returns:
+ *	SK_PNMI_ERR_OK           The request was successfully performed.
+ *	SK_PNMI_ERR_GENERAL      A general severe internal error occured.
+ *	SK_PNMI_ERR_TOO_SHORT    The passed buffer is too short to contain
+ *	                         the correct data (e.g. a 32bit value is
+ *	                         needed, but a 16 bit value was passed).
+ *	SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't
+ *                           exist (e.g. port instance 3 on a two port
+ *	                         adapter.
+ */
+PNMI_STATIC int RlmtStat(
+SK_AC *pAC,		/* Pointer to adapter context */
+SK_IOC IoC,		/* IO context handle */
+int Action,		/* GET/PRESET/SET action */
+SK_U32 Id,		/* Object ID that is to be processed */
+char *pBuf,		/* Buffer used for the management data transfer */
+unsigned int *pLen,	/* On call: pBuf buffer length. On return: used buffer */
+SK_U32 Instance,	/* Instance (1..n) that is to be queried or -1 */
+unsigned int TableIndex, /* Index to the Id table */
+SK_U32 NetIndex)	/* NetIndex (0..n), in single net mode always zero */
+{
+	unsigned int	PhysPortMax;
+	unsigned int	PhysPortIndex;
+	unsigned int	Limit;
+	unsigned int	Offset;
+	int		Ret;
+	SK_U32		Val32;
+	SK_U64		Val64;
+
+	/*
+	 * Calculate the port indexes from the instance.
+	 */
+	PhysPortMax = pAC->GIni.GIMacsFound;
+
+	if ((Instance != (SK_U32)(-1))) {
+		/* Check instance range */
+		if ((Instance < 1) || (Instance > PhysPortMax)) {
+
+			*pLen = 0;
+			return (SK_PNMI_ERR_UNKNOWN_INST);
+		}
+
+		/* Single net mode */
+		PhysPortIndex = Instance - 1;
+
+		/* Dual net mode */
+		if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) {
+			PhysPortIndex = NetIndex;
+		}
+
+		/* Both net modes */
+		Limit = PhysPortIndex + 1;
+	}
+	else {
+		/* Single net mode */
+		PhysPortIndex = 0;
+		Limit = PhysPortMax;
+
+		/* Dual net mode */
+		if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) {
+			PhysPortIndex = NetIndex;
+			Limit = PhysPortIndex + 1;
+		}
+	}
+
+	/*
+	 * Currently only get requests are allowed.
+	 */
+	if (Action != SK_PNMI_GET) {
+
+		*pLen = 0;
+		return (SK_PNMI_ERR_READ_ONLY);
+	}
+
+	/*
+	 * Check if the buffer length is large enough.
+	 */
+	switch (Id) {
+
+	case OID_SKGE_RLMT_PORT_INDEX:
+	case OID_SKGE_RLMT_STATUS:
+		if (*pLen < (Limit - PhysPortIndex) * sizeof(SK_U32)) {
+
+			*pLen = (Limit - PhysPortIndex) * sizeof(SK_U32);
+			return (SK_PNMI_ERR_TOO_SHORT);
+		}
+		break;
+
+	case OID_SKGE_RLMT_TX_HELLO_CTS:
+	case OID_SKGE_RLMT_RX_HELLO_CTS:
+	case OID_SKGE_RLMT_TX_SP_REQ_CTS:
+	case OID_SKGE_RLMT_RX_SP_CTS:
+		if (*pLen < (Limit - PhysPortIndex) * sizeof(SK_U64)) {
+
+			*pLen = (Limit - PhysPortIndex) * sizeof(SK_U64);
+			return (SK_PNMI_ERR_TOO_SHORT);
+		}
+		break;
+
+	default:
+		SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR039,
+			SK_PNMI_ERR039MSG);
+
+		*pLen = 0;
+		return (SK_PNMI_ERR_GENERAL);
+
+	}
+
+	/*
+	 * Update statistic and increment semaphores to indicate that
+	 * an update was already done.
+	 */
+	if ((Ret = RlmtUpdate(pAC, IoC, NetIndex)) != SK_PNMI_ERR_OK) {
+
+		*pLen = 0;
+		return (Ret);
+	}
+	pAC->Pnmi.RlmtUpdatedFlag ++;
+
+	/*
+	 * Get value
+	 */
+	Offset = 0;
+	for (; PhysPortIndex < Limit; PhysPortIndex ++) {
+
+		switch (Id) {
+
+		case OID_SKGE_RLMT_PORT_INDEX:
+			Val32 = PhysPortIndex;
+			SK_PNMI_STORE_U32(pBuf + Offset, Val32);
+			Offset += sizeof(SK_U32);
+			break;
+
+		case OID_SKGE_RLMT_STATUS:
+			if (pAC->Rlmt.Port[PhysPortIndex].PortState ==
+				SK_RLMT_PS_INIT ||
+				pAC->Rlmt.Port[PhysPortIndex].PortState ==
+				SK_RLMT_PS_DOWN) {
+
+				Val32 = SK_PNMI_RLMT_STATUS_ERROR;
+			}
+			else if (pAC->Pnmi.Port[PhysPortIndex].ActiveFlag) {
+
+				Val32 = SK_PNMI_RLMT_STATUS_ACTIVE;
+			}
+			else {
+				Val32 = SK_PNMI_RLMT_STATUS_STANDBY;
+			}
+			SK_PNMI_STORE_U32(pBuf + Offset, Val32);
+			Offset += sizeof(SK_U32);
+			break;
+
+		case OID_SKGE_RLMT_TX_HELLO_CTS:
+			Val64 = pAC->Rlmt.Port[PhysPortIndex].TxHelloCts;
+			SK_PNMI_STORE_U64(pBuf + Offset, Val64);
+			Offset += sizeof(SK_U64);
+			break;
+
+		case OID_SKGE_RLMT_RX_HELLO_CTS:
+			Val64 = pAC->Rlmt.Port[PhysPortIndex].RxHelloCts;
+			SK_PNMI_STORE_U64(pBuf + Offset, Val64);
+			Offset += sizeof(SK_U64);
+			break;
+
+		case OID_SKGE_RLMT_TX_SP_REQ_CTS:
+			Val64 = pAC->Rlmt.Port[PhysPortIndex].TxSpHelloReqCts;
+			SK_PNMI_STORE_U64(pBuf + Offset, Val64);
+			Offset += sizeof(SK_U64);
+			break;
+
+		case OID_SKGE_RLMT_RX_SP_CTS:
+			Val64 = pAC->Rlmt.Port[PhysPortIndex].RxSpHelloCts;
+			SK_PNMI_STORE_U64(pBuf + Offset, Val64);
+			Offset += sizeof(SK_U64);
+			break;
+
+		default:
+			SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_ERR,
+				("RlmtStat: Unknown OID should be errored before"));
+
+			pAC->Pnmi.RlmtUpdatedFlag --;
+			*pLen = 0;
+			return (SK_PNMI_ERR_GENERAL);
+		}
+	}
+	*pLen = Offset;
+
+	pAC->Pnmi.RlmtUpdatedFlag --;
+
+	return (SK_PNMI_ERR_OK);
+}
+
+/*****************************************************************************
+ *
+ * MacPrivateConf - OID handler function of OIDs concerning the configuration
+ *
+ * Description:
+ *	Get/Presets/Sets the OIDs concerning the configuration.
+ *
+ * Returns:
+ *	SK_PNMI_ERR_OK           The request was successfully performed.
+ *	SK_PNMI_ERR_GENERAL      A general severe internal error occured.
+ *	SK_PNMI_ERR_TOO_SHORT    The passed buffer is too short to contain
+ *	                         the correct data (e.g. a 32bit value is
+ *	                         needed, but a 16 bit value was passed).
+ *	SK_PNMI_ERR_BAD_VALUE    The passed value is not in the valid
+ *	                         value range.
+ *	SK_PNMI_ERR_READ_ONLY    The OID is read-only and cannot be set.
+ *	SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't
+ *                           exist (e.g. port instance 3 on a two port
+ *	                         adapter.
+ */
+PNMI_STATIC int MacPrivateConf(
+SK_AC *pAC,		/* Pointer to adapter context */
+SK_IOC IoC,		/* IO context handle */
+int Action,		/* GET/PRESET/SET action */
+SK_U32 Id,		/* Object ID that is to be processed */
+char *pBuf,		/* Buffer used for the management data transfer */
+unsigned int *pLen,	/* On call: pBuf buffer length. On return: used buffer */
+SK_U32 Instance,	/* Instance (1..n) that is to be queried or -1 */
+unsigned int TableIndex, /* Index to the Id table */
+SK_U32 NetIndex)	/* NetIndex (0..n), in single net mode always zero */
+{
+	unsigned int	PhysPortMax;
+	unsigned int	PhysPortIndex;
+	unsigned int	LogPortMax;
+	unsigned int	LogPortIndex;
+	unsigned int	Limit;
+	unsigned int	Offset;
+	char		Val8;
+	char 		*pBufPtr;
+	int			Ret;
+	SK_EVPARA	EventParam;
+	SK_U32		Val32;
+
+	/*
+	 * Calculate instance if wished. MAC index 0 is the virtual MAC.
+	 */
+	PhysPortMax = pAC->GIni.GIMacsFound;
+	LogPortMax = SK_PNMI_PORT_PHYS2LOG(PhysPortMax);
+
+	if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { /* Dual net mode */
+		LogPortMax--;
+	}
+
+	if ((Instance != (SK_U32)(-1))) { /* Only one specific instance is queried */
+		/* Check instance range */
+		if ((Instance < 1) || (Instance > LogPortMax)) {
+
+			*pLen = 0;
+			return (SK_PNMI_ERR_UNKNOWN_INST);
+		}
+		LogPortIndex = SK_PNMI_PORT_INST2LOG(Instance);
+		Limit = LogPortIndex + 1;
+	}
+
+	else { /* Instance == (SK_U32)(-1), get all Instances of that OID */
+
+		LogPortIndex = 0;
+		Limit = LogPortMax;
+	}
+
+	/*
+	 * Perform action
+	 */
+	if (Action == SK_PNMI_GET) {
+
+		/* Check length */
+		switch (Id) {
+
+		case OID_SKGE_PMD:
+		case OID_SKGE_CONNECTOR:
+		case OID_SKGE_LINK_CAP:
+		case OID_SKGE_LINK_MODE:
+		case OID_SKGE_LINK_MODE_STATUS:
+		case OID_SKGE_LINK_STATUS:
+		case OID_SKGE_FLOWCTRL_CAP:
+		case OID_SKGE_FLOWCTRL_MODE:
+		case OID_SKGE_FLOWCTRL_STATUS:
+		case OID_SKGE_PHY_OPERATION_CAP:
+		case OID_SKGE_PHY_OPERATION_MODE:
+		case OID_SKGE_PHY_OPERATION_STATUS:
+		case OID_SKGE_SPEED_CAP:
+		case OID_SKGE_SPEED_MODE:
+		case OID_SKGE_SPEED_STATUS:
+			if (*pLen < (Limit - LogPortIndex) * sizeof(SK_U8)) {
+
+				*pLen = (Limit - LogPortIndex) * sizeof(SK_U8);
+				return (SK_PNMI_ERR_TOO_SHORT);
+			}
+			break;
+
+        case OID_SKGE_MTU:
+        case OID_SKGE_PHY_TYPE:
+			if (*pLen < (Limit - LogPortIndex) * sizeof(SK_U32)) {
+
+				*pLen = (Limit - LogPortIndex) * sizeof(SK_U32);
+				return (SK_PNMI_ERR_TOO_SHORT);
+			}
+			break;
+
+		default:
+			SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR041,
+				SK_PNMI_ERR041MSG);
+			*pLen = 0;
+			return (SK_PNMI_ERR_GENERAL);
+		}
+
+		/*
+		 * Update statistic and increment semaphore to indicate
+		 * that an update was already done.
+		 */
+		if ((Ret = SirqUpdate(pAC, IoC)) != SK_PNMI_ERR_OK) {
+
+			*pLen = 0;
+			return (Ret);
+		}
+		pAC->Pnmi.SirqUpdatedFlag ++;
+
+		/*
+		 * Get value
+		 */
+		Offset = 0;
+		for (; LogPortIndex < Limit; LogPortIndex ++) {
+
+			pBufPtr = pBuf + Offset;
+			
+			switch (Id) {
+
+			case OID_SKGE_PMD:
+				*pBufPtr = pAC->Pnmi.PMD;
+				Offset += sizeof(char);
+				break;
+
+			case OID_SKGE_CONNECTOR:
+				*pBufPtr = pAC->Pnmi.Connector;
+				Offset += sizeof(char);
+				break;
+
+			case OID_SKGE_PHY_TYPE:
+				if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */
+					if (LogPortIndex == 0) {
+						continue;
+					}
+					else {
+						/* Get value for physical ports */
+						PhysPortIndex = SK_PNMI_PORT_LOG2PHYS(
+							pAC, LogPortIndex);
+						Val32 = pAC->GIni.GP[PhysPortIndex].PhyType;
+						SK_PNMI_STORE_U32(pBufPtr, Val32);
+					}
+				}
+				else { /* DualNetMode */
+					
+					Val32 = pAC->GIni.GP[NetIndex].PhyType;
+					SK_PNMI_STORE_U32(pBufPtr, Val32);
+				}
+				Offset += sizeof(SK_U32);
+				break;
+
+			case OID_SKGE_LINK_CAP:
+				if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */
+					if (LogPortIndex == 0) {
+						/* Get value for virtual port */
+						VirtualConf(pAC, IoC, Id, pBufPtr);
+					}
+					else {
+						/* Get value for physical ports */
+						PhysPortIndex = SK_PNMI_PORT_LOG2PHYS(
+							pAC, LogPortIndex);
+
+						*pBufPtr = pAC->GIni.GP[PhysPortIndex].PLinkCap;
+					}
+				}
+				else { /* DualNetMode */
+					
+					*pBufPtr = pAC->GIni.GP[NetIndex].PLinkCap;
+				}
+				Offset += sizeof(char);
+				break;
+
+			case OID_SKGE_LINK_MODE:
+				if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */
+					if (LogPortIndex == 0) {
+						/* Get value for virtual port */
+						VirtualConf(pAC, IoC, Id, pBufPtr);
+					}
+					else {
+						/* Get value for physical ports */
+						PhysPortIndex = SK_PNMI_PORT_LOG2PHYS(
+							pAC, LogPortIndex);
+
+						*pBufPtr = pAC->GIni.GP[PhysPortIndex].PLinkModeConf;
+					}
+				}
+				else { /* DualNetMode */
+				
+					*pBufPtr = pAC->GIni.GP[NetIndex].PLinkModeConf;
+				}
+				Offset += sizeof(char);
+				break;
+
+			case OID_SKGE_LINK_MODE_STATUS:
+				if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */
+					if (LogPortIndex == 0) {
+						/* Get value for virtual port */
+						VirtualConf(pAC, IoC, Id, pBufPtr);
+					}
+					else {
+						/* Get value for physical port */
+						PhysPortIndex = SK_PNMI_PORT_LOG2PHYS(
+							pAC, LogPortIndex);
+
+						*pBufPtr =
+							CalculateLinkModeStatus(pAC, IoC, PhysPortIndex);
+					}
+				}
+				else { /* DualNetMode */
+					
+					*pBufPtr = CalculateLinkModeStatus(pAC, IoC, NetIndex);
+				}
+				Offset += sizeof(char);
+				break;
+
+			case OID_SKGE_LINK_STATUS:
+				if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */
+					if (LogPortIndex == 0) {
+						/* Get value for virtual port */
+						VirtualConf(pAC, IoC, Id, pBufPtr);
+					}
+					else {
+						/* Get value for physical ports */
+						PhysPortIndex = SK_PNMI_PORT_LOG2PHYS(
+							pAC, LogPortIndex);
+	
+						*pBufPtr = CalculateLinkStatus(pAC, IoC, PhysPortIndex);
+					}
+				}
+				else { /* DualNetMode */
+
+					*pBufPtr = CalculateLinkStatus(pAC, IoC, NetIndex);
+				}
+				Offset += sizeof(char);
+				break;
+
+			case OID_SKGE_FLOWCTRL_CAP:
+				if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */
+					if (LogPortIndex == 0) {
+						/* Get value for virtual port */
+						VirtualConf(pAC, IoC, Id, pBufPtr);
+					}
+					else {
+						/* Get value for physical ports */
+						PhysPortIndex = SK_PNMI_PORT_LOG2PHYS(
+							pAC, LogPortIndex);
+	
+						*pBufPtr = pAC->GIni.GP[PhysPortIndex].PFlowCtrlCap;
+					}
+				}
+				else { /* DualNetMode */
+				
+					*pBufPtr = pAC->GIni.GP[NetIndex].PFlowCtrlCap;
+				}
+				Offset += sizeof(char);
+				break;
+
+			case OID_SKGE_FLOWCTRL_MODE:
+				if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */
+					if (LogPortIndex == 0) {
+						/* Get value for virtual port */
+						VirtualConf(pAC, IoC, Id, pBufPtr);
+					}
+					else {
+						/* Get value for physical port */
+						PhysPortIndex = SK_PNMI_PORT_LOG2PHYS(
+							pAC, LogPortIndex);
+	
+						*pBufPtr = pAC->GIni.GP[PhysPortIndex].PFlowCtrlMode;
+					}
+				}
+				else { /* DualNetMode */
+
+					*pBufPtr = pAC->GIni.GP[NetIndex].PFlowCtrlMode;
+				}
+				Offset += sizeof(char);
+				break;
+
+			case OID_SKGE_FLOWCTRL_STATUS:
+				if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */
+					if (LogPortIndex == 0) {
+						/* Get value for virtual port */
+						VirtualConf(pAC, IoC, Id, pBufPtr);
+					}
+					else {
+						/* Get value for physical port */
+						PhysPortIndex = SK_PNMI_PORT_LOG2PHYS(
+							pAC, LogPortIndex);
+	
+						*pBufPtr = pAC->GIni.GP[PhysPortIndex].PFlowCtrlStatus;
+					}
+				}
+				else { /* DualNetMode */
+
+					*pBufPtr = pAC->GIni.GP[NetIndex].PFlowCtrlStatus;
+				}
+				Offset += sizeof(char);
+				break;
+
+			case OID_SKGE_PHY_OPERATION_CAP:
+				if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */
+					if (LogPortIndex == 0) {
+						/* Get value for virtual port */
+						VirtualConf(pAC, IoC, Id, pBufPtr);
+					}
+					else {
+						/* Get value for physical ports */
+						PhysPortIndex = SK_PNMI_PORT_LOG2PHYS(
+							pAC, LogPortIndex);
+	
+						*pBufPtr = pAC->GIni.GP[PhysPortIndex].PMSCap;
+					}
+				}
+				else { /* DualNetMode */
+				
+					*pBufPtr = pAC->GIni.GP[NetIndex].PMSCap;
+				}
+				Offset += sizeof(char);
+				break;
+
+			case OID_SKGE_PHY_OPERATION_MODE:
+				if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */
+					if (LogPortIndex == 0) {
+						/* Get value for virtual port */
+						VirtualConf(pAC, IoC, Id, pBufPtr);
+					}
+					else {
+						/* Get value for physical port */
+						PhysPortIndex = SK_PNMI_PORT_LOG2PHYS(
+							pAC, LogPortIndex);
+
+						*pBufPtr = pAC->GIni.GP[PhysPortIndex].PMSMode;
+					}
+				}
+				else { /* DualNetMode */
+				
+					*pBufPtr = pAC->GIni.GP[NetIndex].PMSMode;
+				}
+				Offset += sizeof(char);
+				break;
+
+			case OID_SKGE_PHY_OPERATION_STATUS:
+				if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */
+					if (LogPortIndex == 0) {
+						/* Get value for virtual port */
+						VirtualConf(pAC, IoC, Id, pBufPtr);
+					}
+					else {
+						/* Get value for physical port */
+						PhysPortIndex = SK_PNMI_PORT_LOG2PHYS(
+							pAC, LogPortIndex);
+	
+						*pBufPtr = pAC->GIni.GP[PhysPortIndex].PMSStatus;
+					}
+				}
+				else {
+				
+					*pBufPtr = pAC->GIni.GP[NetIndex].PMSStatus;
+				}
+				Offset += sizeof(char);
+				break;
+
+			case OID_SKGE_SPEED_CAP:
+				if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */
+					if (LogPortIndex == 0) {
+						/* Get value for virtual port */
+						VirtualConf(pAC, IoC, Id, pBufPtr);
+					}
+					else {
+						/* Get value for physical ports */
+						PhysPortIndex = SK_PNMI_PORT_LOG2PHYS(
+							pAC, LogPortIndex);
+	
+						*pBufPtr = pAC->GIni.GP[PhysPortIndex].PLinkSpeedCap;
+					}
+				}
+				else { /* DualNetMode */
+				
+					*pBufPtr = pAC->GIni.GP[NetIndex].PLinkSpeedCap;
+				}
+				Offset += sizeof(char);
+				break;
+
+			case OID_SKGE_SPEED_MODE:
+				if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */
+					if (LogPortIndex == 0) {
+						/* Get value for virtual port */
+						VirtualConf(pAC, IoC, Id, pBufPtr);
+					}
+					else {
+						/* Get value for physical port */
+						PhysPortIndex = SK_PNMI_PORT_LOG2PHYS(
+							pAC, LogPortIndex);
+	
+						*pBufPtr = pAC->GIni.GP[PhysPortIndex].PLinkSpeed;
+					}
+				}
+				else { /* DualNetMode */
+
+					*pBufPtr = pAC->GIni.GP[NetIndex].PLinkSpeed;
+				}
+				Offset += sizeof(char);
+				break;
+
+			case OID_SKGE_SPEED_STATUS:
+				if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */
+					if (LogPortIndex == 0) {
+						/* Get value for virtual port */
+						VirtualConf(pAC, IoC, Id, pBufPtr);
+					}
+					else {
+						/* Get value for physical port */
+						PhysPortIndex = SK_PNMI_PORT_LOG2PHYS(
+							pAC, LogPortIndex);
+	
+						*pBufPtr = pAC->GIni.GP[PhysPortIndex].PLinkSpeedUsed;
+					}
+				}
+				else { /* DualNetMode */
+
+					*pBufPtr = pAC->GIni.GP[NetIndex].PLinkSpeedUsed;
+				}
+				Offset += sizeof(char);
+				break;
+			
+			case OID_SKGE_MTU:
+				Val32 = SK_DRIVER_GET_MTU(pAC, IoC, NetIndex);
+				SK_PNMI_STORE_U32(pBufPtr, Val32);
+				Offset += sizeof(SK_U32);
+				break;
+
+			default:
+				SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_ERR,
+					("MacPrivateConf: Unknown OID should be handled before"));
+
+				pAC->Pnmi.SirqUpdatedFlag --;
+				return (SK_PNMI_ERR_GENERAL);
+			}
+		}
+		*pLen = Offset;
+		pAC->Pnmi.SirqUpdatedFlag --;
+
+		return (SK_PNMI_ERR_OK);
+	}
+
+	/*
+	 * From here SET or PRESET action. Check if the passed
+	 * buffer length is plausible.
+	 */
+	switch (Id) {
+
+	case OID_SKGE_LINK_MODE:
+	case OID_SKGE_FLOWCTRL_MODE:
+	case OID_SKGE_PHY_OPERATION_MODE:
+	case OID_SKGE_SPEED_MODE:
+		if (*pLen < Limit - LogPortIndex) {
+
+			*pLen = Limit - LogPortIndex;
+			return (SK_PNMI_ERR_TOO_SHORT);
+		}
+		if (*pLen != Limit - LogPortIndex) {
+
+			*pLen = 0;
+			return (SK_PNMI_ERR_BAD_VALUE);
+		}
+		break;
+
+	case OID_SKGE_MTU:
+		if (*pLen < sizeof(SK_U32)) {
+
+			*pLen = sizeof(SK_U32);
+			return (SK_PNMI_ERR_TOO_SHORT);
+		}
+		if (*pLen != sizeof(SK_U32)) {
+
+			*pLen = 0;
+			return (SK_PNMI_ERR_BAD_VALUE);
+		}
+		break;
+
+    default:
+		*pLen = 0;
+		return (SK_PNMI_ERR_READ_ONLY);
+	}
+
+	/*
+	 * Perform preset or set
+	 */
+	Offset = 0;
+	for (; LogPortIndex < Limit; LogPortIndex ++) {
+
+		switch (Id) {
+
+		case OID_SKGE_LINK_MODE:
+			/* Check the value range */
+			Val8 = *(pBuf + Offset);
+			if (Val8 == 0) {
+
+				Offset += sizeof(char);
+				break;
+			}
+			if (Val8 < SK_LMODE_HALF ||
+				(LogPortIndex != 0 && Val8 > SK_LMODE_AUTOSENSE) ||
+				(LogPortIndex == 0 && Val8 > SK_LMODE_INDETERMINATED)) {
+
+				*pLen = 0;
+				return (SK_PNMI_ERR_BAD_VALUE);
+			}
+
+			/* The preset ends here */
+			if (Action == SK_PNMI_PRESET) {
+
+				return (SK_PNMI_ERR_OK);
+			}
+
+			if (LogPortIndex == 0) {
+
+				/*
+				 * The virtual port consists of all currently
+				 * active ports. Find them and send an event
+				 * with the new link mode to SIRQ.
+				 */
+				for (PhysPortIndex = 0;
+					PhysPortIndex < PhysPortMax;
+					PhysPortIndex ++) {
+
+					if (!pAC->Pnmi.Port[PhysPortIndex].
+						ActiveFlag) {
+
+						continue;
+					}
+
+					EventParam.Para32[0] = PhysPortIndex;
+					EventParam.Para32[1] = (SK_U32)Val8;
+					if (SkGeSirqEvent(pAC, IoC,
+						SK_HWEV_SET_LMODE,
+						EventParam) > 0) {
+
+						SK_ERR_LOG(pAC, SK_ERRCL_SW,
+							SK_PNMI_ERR043,
+							SK_PNMI_ERR043MSG);
+
+						*pLen = 0;
+						return (SK_PNMI_ERR_GENERAL);
+					}
+				}
+			}
+			else {
+				/*
+				 * Send an event with the new link mode to
+				 * the SIRQ module.
+				 */
+				EventParam.Para32[0] = SK_PNMI_PORT_LOG2PHYS(
+					pAC, LogPortIndex);
+				EventParam.Para32[1] = (SK_U32)Val8;
+				if (SkGeSirqEvent(pAC, IoC, SK_HWEV_SET_LMODE,
+					EventParam) > 0) {
+
+					SK_ERR_LOG(pAC, SK_ERRCL_SW,
+						SK_PNMI_ERR043,
+						SK_PNMI_ERR043MSG);
+
+					*pLen = 0;
+					return (SK_PNMI_ERR_GENERAL);
+				}
+			}
+			Offset += sizeof(char);
+			break;
+
+		case OID_SKGE_FLOWCTRL_MODE:
+			/* Check the value range */
+			Val8 = *(pBuf + Offset);
+			if (Val8 == 0) {
+
+				Offset += sizeof(char);
+				break;
+			}
+			if (Val8 < SK_FLOW_MODE_NONE ||
+				(LogPortIndex != 0 && Val8 > SK_FLOW_MODE_SYM_OR_REM) ||
+				(LogPortIndex == 0 && Val8 > SK_FLOW_MODE_INDETERMINATED)) {
+
+				*pLen = 0;
+				return (SK_PNMI_ERR_BAD_VALUE);
+			}
+
+			/* The preset ends here */
+			if (Action == SK_PNMI_PRESET) {
+
+				return (SK_PNMI_ERR_OK);
+			}
+
+			if (LogPortIndex == 0) {
+
+				/*
+				 * The virtual port consists of all currently
+				 * active ports. Find them and send an event
+				 * with the new flow control mode to SIRQ.
+				 */
+				for (PhysPortIndex = 0;
+					PhysPortIndex < PhysPortMax;
+					PhysPortIndex ++) {
+
+					if (!pAC->Pnmi.Port[PhysPortIndex].
+						ActiveFlag) {
+
+						continue;
+					}
+
+					EventParam.Para32[0] = PhysPortIndex;
+					EventParam.Para32[1] = (SK_U32)Val8;
+					if (SkGeSirqEvent(pAC, IoC,
+						SK_HWEV_SET_FLOWMODE,
+						EventParam) > 0) {
+
+						SK_ERR_LOG(pAC, SK_ERRCL_SW,
+							SK_PNMI_ERR044,
+							SK_PNMI_ERR044MSG);
+
+						*pLen = 0;
+						return (SK_PNMI_ERR_GENERAL);
+					}
+				}
+			}
+			else {
+				/*
+				 * Send an event with the new flow control
+				 * mode to the SIRQ module.
+				 */
+				EventParam.Para32[0] = SK_PNMI_PORT_LOG2PHYS(
+					pAC, LogPortIndex);
+				EventParam.Para32[1] = (SK_U32)Val8;
+				if (SkGeSirqEvent(pAC, IoC,
+					SK_HWEV_SET_FLOWMODE, EventParam)
+					> 0) {
+
+					SK_ERR_LOG(pAC, SK_ERRCL_SW,
+						SK_PNMI_ERR044,
+						SK_PNMI_ERR044MSG);
+
+					*pLen = 0;
+					return (SK_PNMI_ERR_GENERAL);
+				}
+			}
+			Offset += sizeof(char);
+			break;
+
+		case OID_SKGE_PHY_OPERATION_MODE :
+			/* Check the value range */
+			Val8 = *(pBuf + Offset);
+			if (Val8 == 0) {
+				/* mode of this port remains unchanged */
+				Offset += sizeof(char);
+				break;
+			}
+			if (Val8 < SK_MS_MODE_AUTO ||
+				(LogPortIndex != 0 && Val8 > SK_MS_MODE_SLAVE) ||
+				(LogPortIndex == 0 && Val8 > SK_MS_MODE_INDETERMINATED)) {
+
+				*pLen = 0;
+				return (SK_PNMI_ERR_BAD_VALUE);
+			}
+
+			/* The preset ends here */
+			if (Action == SK_PNMI_PRESET) {
+
+				return (SK_PNMI_ERR_OK);
+			}
+
+			if (LogPortIndex == 0) {
+
+				/*
+				 * The virtual port consists of all currently
+				 * active ports. Find them and send an event
+				 * with new master/slave (role) mode to SIRQ.
+				 */
+				for (PhysPortIndex = 0;
+					PhysPortIndex < PhysPortMax;
+					PhysPortIndex ++) {
+
+					if (!pAC->Pnmi.Port[PhysPortIndex].
+						ActiveFlag) {
+
+						continue;
+					}
+
+					EventParam.Para32[0] = PhysPortIndex;
+					EventParam.Para32[1] = (SK_U32)Val8;
+					if (SkGeSirqEvent(pAC, IoC,
+						SK_HWEV_SET_ROLE,
+						EventParam) > 0) {
+
+						SK_ERR_LOG(pAC, SK_ERRCL_SW,
+							SK_PNMI_ERR042,
+							SK_PNMI_ERR042MSG);
+
+						*pLen = 0;
+						return (SK_PNMI_ERR_GENERAL);
+					}
+				}
+			}
+			else {
+				/*
+				 * Send an event with the new master/slave
+				 * (role) mode to the SIRQ module.
+				 */
+				EventParam.Para32[0] = SK_PNMI_PORT_LOG2PHYS(
+					pAC, LogPortIndex);
+				EventParam.Para32[1] = (SK_U32)Val8;
+				if (SkGeSirqEvent(pAC, IoC,
+					SK_HWEV_SET_ROLE, EventParam) > 0) {
+
+					SK_ERR_LOG(pAC, SK_ERRCL_SW,
+						SK_PNMI_ERR042,
+						SK_PNMI_ERR042MSG);
+
+					*pLen = 0;
+					return (SK_PNMI_ERR_GENERAL);
+				}
+			}
+
+			Offset += sizeof(char);
+			break;
+
+		case OID_SKGE_SPEED_MODE:
+			/* Check the value range */
+			Val8 = *(pBuf + Offset);
+			if (Val8 == 0) {
+
+				Offset += sizeof(char);
+				break;
+			}
+			if (Val8 < (SK_LSPEED_AUTO) ||
+				(LogPortIndex != 0 && Val8 > (SK_LSPEED_1000MBPS)) ||
+				(LogPortIndex == 0 && Val8 > (SK_LSPEED_INDETERMINATED))) {
+
+				*pLen = 0;
+				return (SK_PNMI_ERR_BAD_VALUE);
+			}
+
+			/* The preset ends here */
+			if (Action == SK_PNMI_PRESET) {
+
+				return (SK_PNMI_ERR_OK);
+			}
+
+			if (LogPortIndex == 0) {
+
+				/*
+				 * The virtual port consists of all currently
+				 * active ports. Find them and send an event
+				 * with the new flow control mode to SIRQ.
+				 */
+				for (PhysPortIndex = 0;
+					PhysPortIndex < PhysPortMax;
+					PhysPortIndex ++) {
+
+					if (!pAC->Pnmi.Port[PhysPortIndex].ActiveFlag) {
+
+						continue;
+					}
+
+					EventParam.Para32[0] = PhysPortIndex;
+					EventParam.Para32[1] = (SK_U32)Val8;
+					if (SkGeSirqEvent(pAC, IoC,
+						SK_HWEV_SET_SPEED,
+						EventParam) > 0) {
+
+						SK_ERR_LOG(pAC, SK_ERRCL_SW,
+							SK_PNMI_ERR045,
+							SK_PNMI_ERR045MSG);
+
+						*pLen = 0;
+						return (SK_PNMI_ERR_GENERAL);
+					}
+				}
+			}
+			else {
+				/*
+				 * Send an event with the new flow control
+				 * mode to the SIRQ module.
+				 */
+				EventParam.Para32[0] = SK_PNMI_PORT_LOG2PHYS(
+					pAC, LogPortIndex);
+				EventParam.Para32[1] = (SK_U32)Val8;
+				if (SkGeSirqEvent(pAC, IoC,
+					SK_HWEV_SET_SPEED,
+					EventParam) > 0) {
+
+					SK_ERR_LOG(pAC, SK_ERRCL_SW,
+						SK_PNMI_ERR045,
+						SK_PNMI_ERR045MSG);
+
+					*pLen = 0;
+					return (SK_PNMI_ERR_GENERAL);
+				}
+			}
+			Offset += sizeof(char);
+			break;
+
+		case OID_SKGE_MTU :
+			/* Check the value range */
+			Val32 = *(SK_U32*)(pBuf + Offset);
+			if (Val32 == 0) {
+				/* mtu of this port remains unchanged */
+				Offset += sizeof(SK_U32);
+				break;
+			}
+			if (SK_DRIVER_PRESET_MTU(pAC, IoC, NetIndex, Val32) != 0) {
+				*pLen = 0;
+				return (SK_PNMI_ERR_BAD_VALUE);
+			}
+
+			/* The preset ends here */
+			if (Action == SK_PNMI_PRESET) {
+				return (SK_PNMI_ERR_OK);
+			}
+
+			if (SK_DRIVER_SET_MTU(pAC, IoC, NetIndex, Val32) != 0) {
+				return (SK_PNMI_ERR_GENERAL);
+			}
+
+			Offset += sizeof(SK_U32);
+			break;
+		
+		default:
+            SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_ERR,
+                ("MacPrivateConf: Unknown OID should be handled before set"));
+
+			*pLen = 0;
+			return (SK_PNMI_ERR_GENERAL);
+		}
+	}
+
+	return (SK_PNMI_ERR_OK);
+}
+
+/*****************************************************************************
+ *
+ * Monitor - OID handler function for RLMT_MONITOR_XXX
+ *
+ * Description:
+ *	Because RLMT currently does not support the monitoring of
+ *	remote adapter cards, we return always an empty table.
+ *
+ * Returns:
+ *	SK_PNMI_ERR_OK           The request was successfully performed.
+ *	SK_PNMI_ERR_GENERAL      A general severe internal error occured.
+ *	SK_PNMI_ERR_TOO_SHORT    The passed buffer is too short to contain
+ *	                         the correct data (e.g. a 32bit value is
+ *	                         needed, but a 16 bit value was passed).
+ *	SK_PNMI_ERR_BAD_VALUE    The passed value is not in the valid
+ *	                         value range.
+ *	SK_PNMI_ERR_READ_ONLY    The OID is read-only and cannot be set.
+ *	SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't
+ *                           exist (e.g. port instance 3 on a two port
+ *	                         adapter.
+ */
+PNMI_STATIC int Monitor(
+SK_AC *pAC,		/* Pointer to adapter context */
+SK_IOC IoC,		/* IO context handle */
+int Action,		/* GET/PRESET/SET action */
+SK_U32 Id,		/* Object ID that is to be processed */
+char *pBuf,		/* Buffer used for the management data transfer */
+unsigned int *pLen,	/* On call: pBuf buffer length. On return: used buffer */
+SK_U32 Instance,	/* Instance (1..n) that is to be queried or -1 */
+unsigned int TableIndex, /* Index to the Id table */
+SK_U32 NetIndex)	/* NetIndex (0..n), in single net mode always zero */
+{
+	unsigned int	Index;
+	unsigned int	Limit;
+	unsigned int	Offset;
+	unsigned int	Entries;
+
+	
+	/*
+	 * Calculate instance if wished.
+	 */
+	/* XXX Not yet implemented. Return always an empty table. */
+	Entries = 0;
+
+	if ((Instance != (SK_U32)(-1))) {
+
+		if ((Instance < 1) || (Instance > Entries)) {
+
+			*pLen = 0;
+			return (SK_PNMI_ERR_UNKNOWN_INST);
+		}
+
+		Index = (unsigned int)Instance - 1;
+		Limit = (unsigned int)Instance;
+	}
+	else {
+		Index = 0;
+		Limit = Entries;
+	}
+
+	/*
+	 * Get/Set value
+	*/
+	if (Action == SK_PNMI_GET) {
+
+		for (Offset=0; Index < Limit; Index ++) {
+
+			switch (Id) {
+
+			case OID_SKGE_RLMT_MONITOR_INDEX:
+			case OID_SKGE_RLMT_MONITOR_ADDR:
+			case OID_SKGE_RLMT_MONITOR_ERRS:
+			case OID_SKGE_RLMT_MONITOR_TIMESTAMP:
+			case OID_SKGE_RLMT_MONITOR_ADMIN:
+				break;
+
+			default:
+				SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR046,
+					SK_PNMI_ERR046MSG);
+
+				*pLen = 0;
+				return (SK_PNMI_ERR_GENERAL);
+			}
+		}
+		*pLen = Offset;
+	}
+	else {
+		/* Only MONITOR_ADMIN can be set */
+		if (Id != OID_SKGE_RLMT_MONITOR_ADMIN) {
+
+			*pLen = 0;
+			return (SK_PNMI_ERR_READ_ONLY);
+		}
+
+		/* Check if the length is plausible */
+		if (*pLen < (Limit - Index)) {
+
+			return (SK_PNMI_ERR_TOO_SHORT);
+		}
+		/* Okay, we have a wide value range */
+		if (*pLen != (Limit - Index)) {
+
+			*pLen = 0;
+			return (SK_PNMI_ERR_BAD_VALUE);
+		}
+/*
+		for (Offset=0; Index < Limit; Index ++) {
+		}
+*/
+/*
+ * XXX Not yet implemented. Return always BAD_VALUE, because the table
+ * is empty.
+ */
+		*pLen = 0;
+		return (SK_PNMI_ERR_BAD_VALUE);
+	}
+
+	return (SK_PNMI_ERR_OK);
+}
+
+/*****************************************************************************
+ *
+ * VirtualConf - Calculates the values of configuration OIDs for virtual port
+ *
+ * Description:
+ *	We handle here the get of the configuration group OIDs, which are
+ *	a little bit complicated. The virtual port consists of all currently
+ *	active physical ports. If multiple ports are active and configured
+ *	differently we get in some trouble to return a single value. So we
+ *	get the value of the first active port and compare it with that of
+ *	the other active ports. If they are not the same, we return a value
+ *	that indicates that the state is indeterminated.
+ *
+ * Returns:
+ *	Nothing
+ */
+PNMI_STATIC void VirtualConf(
+SK_AC *pAC,		/* Pointer to adapter context */
+SK_IOC IoC,		/* IO context handle */
+SK_U32 Id,		/* Object ID that is to be processed */
+char *pBuf)		/* Buffer used for the management data transfer */
+{
+	unsigned int	PhysPortMax;
+	unsigned int	PhysPortIndex;
+	SK_U8		Val8;
+	SK_U32		Val32;
+	SK_BOOL		PortActiveFlag;
+	SK_GEPORT	*pPrt;
+
+	*pBuf = 0;
+	PortActiveFlag = SK_FALSE;
+	PhysPortMax = pAC->GIni.GIMacsFound;
+	
+	for (PhysPortIndex = 0; PhysPortIndex < PhysPortMax;
+		PhysPortIndex ++) {
+
+		pPrt = &pAC->GIni.GP[PhysPortIndex];
+
+		/* Check if the physical port is active */
+		if (!pAC->Pnmi.Port[PhysPortIndex].ActiveFlag) {
+
+			continue;
+		}
+
+		PortActiveFlag = SK_TRUE;
+
+		switch (Id) {
+
+		case OID_SKGE_PHY_TYPE:
+			/* Check if it is the first active port */
+			if (*pBuf == 0) {
+				Val32 = pPrt->PhyType;
+				SK_PNMI_STORE_U32(pBuf, Val32);
+				continue;
+			}
+
+		case OID_SKGE_LINK_CAP:
+
+			/*
+			 * Different capabilities should not happen, but
+			 * in the case of the cases OR them all together.
+			 * From a curious point of view the virtual port
+			 * is capable of all found capabilities.
+			 */
+			*pBuf |= pPrt->PLinkCap;
+			break;
+
+		case OID_SKGE_LINK_MODE:
+			/* Check if it is the first active port */
+			if (*pBuf == 0) {
+
+				*pBuf = pPrt->PLinkModeConf;
+				continue;
+			}
+
+			/*
+			 * If we find an active port with a different link
+			 * mode than the first one we return a value that
+			 * indicates that the link mode is indeterminated.
+			 */
+			if (*pBuf != pPrt->PLinkModeConf) {
+
+				*pBuf = SK_LMODE_INDETERMINATED;
+			}
+			break;
+
+		case OID_SKGE_LINK_MODE_STATUS:
+			/* Get the link mode of the physical port */
+			Val8 = CalculateLinkModeStatus(pAC, IoC, PhysPortIndex);
+
+			/* Check if it is the first active port */
+			if (*pBuf == 0) {
+
+				*pBuf = Val8;
+				continue;
+			}
+
+			/*
+			 * If we find an active port with a different link
+			 * mode status than the first one we return a value
+			 * that indicates that the link mode status is
+			 * indeterminated.
+			 */
+			if (*pBuf != Val8) {
+
+				*pBuf = SK_LMODE_STAT_INDETERMINATED;
+			}
+			break;
+
+		case OID_SKGE_LINK_STATUS:
+			/* Get the link status of the physical port */
+			Val8 = CalculateLinkStatus(pAC, IoC, PhysPortIndex);
+
+			/* Check if it is the first active port */
+			if (*pBuf == 0) {
+
+				*pBuf = Val8;
+				continue;
+			}
+
+			/*
+			 * If we find an active port with a different link
+			 * status than the first one, we return a value
+			 * that indicates that the link status is
+			 * indeterminated.
+			 */
+			if (*pBuf != Val8) {
+
+				*pBuf = SK_PNMI_RLMT_LSTAT_INDETERMINATED;
+			}
+			break;
+
+		case OID_SKGE_FLOWCTRL_CAP:
+			/* Check if it is the first active port */
+			if (*pBuf == 0) {
+
+				*pBuf = pPrt->PFlowCtrlCap;
+				continue;
+			}
+
+			/*
+			 * From a curious point of view the virtual port
+			 * is capable of all found capabilities.
+			 */
+			*pBuf |= pPrt->PFlowCtrlCap;
+			break;
+
+		case OID_SKGE_FLOWCTRL_MODE:
+			/* Check if it is the first active port */
+			if (*pBuf == 0) {
+
+				*pBuf = pPrt->PFlowCtrlMode;
+				continue;
+			}
+
+			/*
+			 * If we find an active port with a different flow
+			 * control mode than the first one, we return a value
+			 * that indicates that the mode is indeterminated.
+			 */
+			if (*pBuf != pPrt->PFlowCtrlMode) {
+
+				*pBuf = SK_FLOW_MODE_INDETERMINATED;
+			}
+			break;
+
+		case OID_SKGE_FLOWCTRL_STATUS:
+			/* Check if it is the first active port */
+			if (*pBuf == 0) {
+
+				*pBuf = pPrt->PFlowCtrlStatus;
+				continue;
+			}
+
+			/*
+			 * If we find an active port with a different flow
+			 * control status than the first one, we return a
+			 * value that indicates that the status is
+			 * indeterminated.
+			 */
+			if (*pBuf != pPrt->PFlowCtrlStatus) {
+
+				*pBuf = SK_FLOW_STAT_INDETERMINATED;
+			}
+			break;
+		
+		case OID_SKGE_PHY_OPERATION_CAP:
+			/* Check if it is the first active port */
+			if (*pBuf == 0) {
+
+				*pBuf = pPrt->PMSCap;
+				continue;
+			}
+
+			/*
+			 * From a curious point of view the virtual port
+			 * is capable of all found capabilities.
+			 */
+			*pBuf |= pPrt->PMSCap;
+			break;
+
+		case OID_SKGE_PHY_OPERATION_MODE:
+			/* Check if it is the first active port */
+			if (*pBuf == 0) {
+
+				*pBuf = pPrt->PMSMode;
+				continue;
+			}
+
+			/*
+			 * If we find an active port with a different master/
+			 * slave mode than the first one, we return a value
+			 * that indicates that the mode is indeterminated.
+			 */
+			if (*pBuf != pPrt->PMSMode) {
+
+				*pBuf = SK_MS_MODE_INDETERMINATED;
+			}
+			break;
+
+		case OID_SKGE_PHY_OPERATION_STATUS:
+			/* Check if it is the first active port */
+			if (*pBuf == 0) {
+
+				*pBuf = pPrt->PMSStatus;
+				continue;
+			}
+
+			/*
+			 * If we find an active port with a different master/
+			 * slave status than the first one, we return a
+			 * value that indicates that the status is
+			 * indeterminated.
+			 */
+			if (*pBuf != pPrt->PMSStatus) {
+
+				*pBuf = SK_MS_STAT_INDETERMINATED;
+			}
+			break;
+		
+		case OID_SKGE_SPEED_MODE:
+			/* Check if it is the first active port */
+			if (*pBuf == 0) {
+
+				*pBuf = pPrt->PLinkSpeed;
+				continue;
+			}
+
+			/*
+			 * If we find an active port with a different flow
+			 * control mode than the first one, we return a value
+			 * that indicates that the mode is indeterminated.
+			 */
+			if (*pBuf != pPrt->PLinkSpeed) {
+
+				*pBuf = SK_LSPEED_INDETERMINATED;
+			}
+			break;
+		
+		case OID_SKGE_SPEED_STATUS:
+			/* Check if it is the first active port */
+			if (*pBuf == 0) {
+
+				*pBuf = pPrt->PLinkSpeedUsed;
+				continue;
+			}
+
+			/*
+			 * If we find an active port with a different flow
+			 * control status than the first one, we return a
+			 * value that indicates that the status is
+			 * indeterminated.
+			 */
+			if (*pBuf != pPrt->PLinkSpeedUsed) {
+
+				*pBuf = SK_LSPEED_STAT_INDETERMINATED;
+			}
+			break;
+		}
+	}
+
+	/*
+	 * If no port is active return an indeterminated answer
+	 */
+	if (!PortActiveFlag) {
+
+		switch (Id) {
+
+		case OID_SKGE_LINK_CAP:
+			*pBuf = SK_LMODE_CAP_INDETERMINATED;
+			break;
+
+		case OID_SKGE_LINK_MODE:
+			*pBuf = SK_LMODE_INDETERMINATED;
+			break;
+
+		case OID_SKGE_LINK_MODE_STATUS:
+			*pBuf = SK_LMODE_STAT_INDETERMINATED;
+			break;
+
+		case OID_SKGE_LINK_STATUS:
+			*pBuf = SK_PNMI_RLMT_LSTAT_INDETERMINATED;
+			break;
+
+		case OID_SKGE_FLOWCTRL_CAP:
+		case OID_SKGE_FLOWCTRL_MODE:
+			*pBuf = SK_FLOW_MODE_INDETERMINATED;
+			break;
+
+		case OID_SKGE_FLOWCTRL_STATUS:
+			*pBuf = SK_FLOW_STAT_INDETERMINATED;
+			break;
+			
+		case OID_SKGE_PHY_OPERATION_CAP:
+			*pBuf = SK_MS_CAP_INDETERMINATED;
+			break;
+
+		case OID_SKGE_PHY_OPERATION_MODE:
+			*pBuf = SK_MS_MODE_INDETERMINATED;
+			break;
+
+		case OID_SKGE_PHY_OPERATION_STATUS:
+			*pBuf = SK_MS_STAT_INDETERMINATED;
+			break;
+		case OID_SKGE_SPEED_CAP:
+			*pBuf = SK_LSPEED_CAP_INDETERMINATED;
+			break;
+
+		case OID_SKGE_SPEED_MODE:
+			*pBuf = SK_LSPEED_INDETERMINATED;
+			break;
+
+		case OID_SKGE_SPEED_STATUS:
+			*pBuf = SK_LSPEED_STAT_INDETERMINATED;
+			break;
+		}
+	}
+}
+
+/*****************************************************************************
+ *
+ * CalculateLinkStatus - Determins the link status of a physical port
+ *
+ * Description:
+ *	Determins the link status the following way:
+ *	  LSTAT_PHY_DOWN:  Link is down
+ *	  LSTAT_AUTONEG:   Auto-negotiation failed
+ *	  LSTAT_LOG_DOWN:  Link is up but RLMT did not yet put the port
+ *	                   logically up.
+ *	  LSTAT_LOG_UP:    RLMT marked the port as up
+ *
+ * Returns:
+ *	Link status of physical port
+ */
+PNMI_STATIC SK_U8 CalculateLinkStatus(
+SK_AC *pAC,			/* Pointer to adapter context */
+SK_IOC IoC,			/* IO context handle */
+unsigned int PhysPortIndex)	/* Physical port index */
+{
+	SK_U8	Result;
+
+	if (!pAC->GIni.GP[PhysPortIndex].PHWLinkUp) {
+
+		Result = SK_PNMI_RLMT_LSTAT_PHY_DOWN;
+	}
+	else if (pAC->GIni.GP[PhysPortIndex].PAutoNegFail > 0) {
+
+		Result = SK_PNMI_RLMT_LSTAT_AUTONEG;
+				}
+	else if (!pAC->Rlmt.Port[PhysPortIndex].PortDown) {
+
+		Result = SK_PNMI_RLMT_LSTAT_LOG_UP;
+	}
+	else {
+		Result = SK_PNMI_RLMT_LSTAT_LOG_DOWN;
+	}
+
+	return (Result);
+}
+
+/*****************************************************************************
+ *
+ * CalculateLinkModeStatus - Determins the link mode status of a phys. port
+ *
+ * Description:
+ *	The COMMON module only tells us if the mode is half or full duplex.
+ *	But in the decade of auto sensing it is useful for the user to
+ *	know if the mode was negotiated or forced. Therefore we have a
+ *	look to the mode, which was last used by the negotiation process.
+ *
+ * Returns:
+ *	The link mode status
+ */
+PNMI_STATIC SK_U8 CalculateLinkModeStatus(
+SK_AC *pAC,			/* Pointer to adapter context */
+SK_IOC IoC,			/* IO context handle */
+unsigned int PhysPortIndex)	/* Physical port index */
+{
+	SK_U8	Result;
+
+	/* Get the current mode, which can be full or half duplex */
+	Result = pAC->GIni.GP[PhysPortIndex].PLinkModeStatus;
+
+	/* Check if no valid mode could be found (link is down) */
+	if (Result < SK_LMODE_STAT_HALF) {
+
+		Result = SK_LMODE_STAT_UNKNOWN;
+	}
+	else if (pAC->GIni.GP[PhysPortIndex].PLinkMode >= SK_LMODE_AUTOHALF) {
+
+		/*
+		 * Auto-negotiation was used to bring up the link. Change
+		 * the already found duplex status that it indicates
+		 * auto-negotiation was involved.
+		 */
+		if (Result == SK_LMODE_STAT_HALF) {
+
+			Result = SK_LMODE_STAT_AUTOHALF;
+		}
+		else if (Result == SK_LMODE_STAT_FULL) {
+
+			Result = SK_LMODE_STAT_AUTOFULL;
+		}
+	}
+
+	return (Result);
+}
+
+/*****************************************************************************
+ *
+ * GetVpdKeyArr - Obtain an array of VPD keys
+ *
+ * Description:
+ *	Read the VPD keys and build an array of VPD keys, which are
+ *	easy to access.
+ *
+ * Returns:
+ *	SK_PNMI_ERR_OK	     Task successfully performed.
+ *	SK_PNMI_ERR_GENERAL  Something went wrong.
+ */
+PNMI_STATIC int GetVpdKeyArr(
+SK_AC *pAC,		/* Pointer to adapter context */
+SK_IOC IoC,		/* IO context handle */
+char *pKeyArr,		/* Ptr KeyArray */
+unsigned int KeyArrLen,	/* Length of array in bytes */
+unsigned int *pKeyNo)	/* Number of keys */
+{
+	unsigned int		BufKeysLen = SK_PNMI_VPD_BUFSIZE;
+	char			BufKeys[SK_PNMI_VPD_BUFSIZE];
+	unsigned int		StartOffset;
+	unsigned int		Offset;
+	int			Index;
+	int			Ret;
+
+
+	SK_MEMSET(pKeyArr, 0, KeyArrLen);
+
+	/*
+	 * Get VPD key list
+	 */
+	Ret = VpdKeys(pAC, IoC, (char *)&BufKeys, (int *)&BufKeysLen,
+		(int *)pKeyNo);
+	if (Ret > 0) {
+
+		SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR014,
+			SK_PNMI_ERR014MSG);
+
+		return (SK_PNMI_ERR_GENERAL);
+	}
+	/* If no keys are available return now */
+	if (*pKeyNo == 0 || BufKeysLen == 0) {
+
+		return (SK_PNMI_ERR_OK);
+	}
+	/*
+	 * If the key list is too long for us trunc it and give a
+	 * errorlog notification. This case should not happen because
+	 * the maximum number of keys is limited due to RAM limitations
+	 */
+	if (*pKeyNo > SK_PNMI_VPD_ENTRIES) {
+
+		SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR015,
+			SK_PNMI_ERR015MSG);
+
+		*pKeyNo = SK_PNMI_VPD_ENTRIES;
+	}
+
+	/*
+	 * Now build an array of fixed string length size and copy
+	 * the keys together.
+	 */
+	for (Index = 0, StartOffset = 0, Offset = 0; Offset < BufKeysLen;
+		Offset ++) {
+
+		if (BufKeys[Offset] != 0) {
+
+			continue;
+		}
+
+		if (Offset - StartOffset > SK_PNMI_VPD_KEY_SIZE) {
+
+			SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR016,
+				SK_PNMI_ERR016MSG);
+			return (SK_PNMI_ERR_GENERAL);
+		}
+
+		SK_STRNCPY(pKeyArr + Index * SK_PNMI_VPD_KEY_SIZE,
+			&BufKeys[StartOffset], SK_PNMI_VPD_KEY_SIZE);
+
+		Index ++;
+		StartOffset = Offset + 1;
+	}
+
+	/* Last key not zero terminated? Get it anyway */
+	if (StartOffset < Offset) {
+
+		SK_STRNCPY(pKeyArr + Index * SK_PNMI_VPD_KEY_SIZE,
+			&BufKeys[StartOffset], SK_PNMI_VPD_KEY_SIZE);
+	}
+
+	return (SK_PNMI_ERR_OK);
+}
+
+/*****************************************************************************
+ *
+ * SirqUpdate - Let the SIRQ update its internal values
+ *
+ * Description:
+ *	Just to be sure that the SIRQ module holds its internal data
+ *	structures up to date, we send an update event before we make
+ *	any access.
+ *
+ * Returns:
+ *	SK_PNMI_ERR_OK	     Task successfully performed.
+ *	SK_PNMI_ERR_GENERAL  Something went wrong.
+ */
+PNMI_STATIC int SirqUpdate(
+SK_AC *pAC,	/* Pointer to adapter context */
+SK_IOC IoC)	/* IO context handle */
+{
+	SK_EVPARA	EventParam;
+
+
+	/* Was the module already updated during the current PNMI call? */
+	if (pAC->Pnmi.SirqUpdatedFlag > 0) {
+
+		return (SK_PNMI_ERR_OK);
+	}
+
+	/* Send an synchronuous update event to the module */
+	SK_MEMSET((char *)&EventParam, 0, sizeof(EventParam));
+	if (SkGeSirqEvent(pAC, IoC, SK_HWEV_UPDATE_STAT, EventParam) > 0) {
+
+		SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR047,
+			SK_PNMI_ERR047MSG);
+
+		return (SK_PNMI_ERR_GENERAL);
+	}
+
+	return (SK_PNMI_ERR_OK);
+}
+
+/*****************************************************************************
+ *
+ * RlmtUpdate - Let the RLMT update its internal values
+ *
+ * Description:
+ *	Just to be sure that the RLMT module holds its internal data
+ *	structures up to date, we send an update event before we make
+ *	any access.
+ *
+ * Returns:
+ *	SK_PNMI_ERR_OK	     Task successfully performed.
+ *	SK_PNMI_ERR_GENERAL  Something went wrong.
+ */
+PNMI_STATIC int RlmtUpdate(
+SK_AC *pAC,	/* Pointer to adapter context */
+SK_IOC IoC,	/* IO context handle */
+SK_U32 NetIndex)	/* NetIndex (0..n), in single net mode allways zero */
+{
+	SK_EVPARA	EventParam;
+
+
+	/* Was the module already updated during the current PNMI call? */
+	if (pAC->Pnmi.RlmtUpdatedFlag > 0) {
+
+		return (SK_PNMI_ERR_OK);
+	}
+
+	/* Send an synchronuous update event to the module */
+	SK_MEMSET((char *)&EventParam, 0, sizeof(EventParam));
+	EventParam.Para32[0] = NetIndex;
+	EventParam.Para32[1] = (SK_U32)-1;
+	if (SkRlmtEvent(pAC, IoC, SK_RLMT_STATS_UPDATE, EventParam) > 0) {
+
+		SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR048,
+			SK_PNMI_ERR048MSG);
+
+		return (SK_PNMI_ERR_GENERAL);
+	}
+
+	return (SK_PNMI_ERR_OK);
+}
+
+/*****************************************************************************
+ *
+ * MacUpdate - Force the XMAC to output the current statistic
+ *
+ * Description:
+ *	The XMAC holds its statistic internally. To obtain the current
+ *	values we must send a command so that the statistic data will
+ *	be written to a predefined memory area on the adapter.
+ *
+ * Returns:
+ *	SK_PNMI_ERR_OK	     Task successfully performed.
+ *	SK_PNMI_ERR_GENERAL  Something went wrong.
+ */
+PNMI_STATIC int MacUpdate(
+SK_AC *pAC,		/* Pointer to adapter context */
+SK_IOC IoC,		/* IO context handle */
+unsigned int FirstMac,	/* Index of the first Mac to be updated */
+unsigned int LastMac)	/* Index of the last Mac to be updated */
+{
+	unsigned int	MacIndex;
+
+	/*
+	 * Were the statistics already updated during the
+	 * current PNMI call?
+	 */
+	if (pAC->Pnmi.MacUpdatedFlag > 0) {
+
+		return (SK_PNMI_ERR_OK);
+	}
+
+	/* Send an update command to all MACs specified */
+	for (MacIndex = FirstMac; MacIndex <= LastMac; MacIndex ++) {
+
+		/*
+		 * 2002-09-13 pweber:	Freeze the current SW counters.
+		 *                      (That should be done as close as
+		 *                      possible to the update of the
+		 *                      HW counters)
+		 */
+		if (pAC->GIni.GIMacType == SK_MAC_XMAC) {
+			pAC->Pnmi.BufPort[MacIndex] = pAC->Pnmi.Port[MacIndex];
+		}
+			
+		/* 2002-09-13 pweber:  Update the HW counter  */
+		if (pAC->GIni.GIFunc.pFnMacUpdateStats(pAC, IoC, MacIndex) != 0) {
+
+			return (SK_PNMI_ERR_GENERAL);
+		}
+	}
+
+	return (SK_PNMI_ERR_OK);
+}
+
+/*****************************************************************************
+ *
+ * GetStatVal - Retrieve an XMAC statistic counter
+ *
+ * Description:
+ *	Retrieves the statistic counter of a virtual or physical port. The
+ *	virtual port is identified by the index 0. It consists of all
+ *	currently active ports. To obtain the counter value for this port
+ *	we must add the statistic counter of all active ports. To grant
+ *	continuous counter values for the virtual port even when port
+ *	switches occur we must additionally add a delta value, which was
+ *	calculated during a SK_PNMI_EVT_RLMT_ACTIVE_UP event.
+ *
+ * Returns:
+ *	Requested statistic value
+ */
+PNMI_STATIC SK_U64 GetStatVal(
+SK_AC *pAC,					/* Pointer to adapter context */
+SK_IOC IoC,					/* IO context handle */
+unsigned int LogPortIndex,	/* Index of the logical Port to be processed */
+unsigned int StatIndex,		/* Index to statistic value */
+SK_U32 NetIndex)	/* NetIndex (0..n), in single net mode allways zero */
+{
+	unsigned int	PhysPortIndex;
+	unsigned int	PhysPortMax;
+	SK_U64			Val = 0;
+
+
+	if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) {	/* Dual net mode */
+
+		PhysPortIndex = NetIndex;
+		
+		Val = GetPhysStatVal(pAC, IoC, PhysPortIndex, StatIndex);
+	}
+	else {	/* Single Net mode */
+
+		if (LogPortIndex == 0) {
+
+			PhysPortMax = pAC->GIni.GIMacsFound;
+
+			/* Add counter of all active ports */
+			for (PhysPortIndex = 0; PhysPortIndex < PhysPortMax;
+				PhysPortIndex ++) {
+
+				if (pAC->Pnmi.Port[PhysPortIndex].ActiveFlag) {
+
+					Val += GetPhysStatVal(pAC, IoC, PhysPortIndex, StatIndex);
+				}
+			}
+
+			/* Correct value because of port switches */
+			Val += pAC->Pnmi.VirtualCounterOffset[StatIndex];
+		}
+		else {
+			/* Get counter value of physical port */
+			PhysPortIndex = SK_PNMI_PORT_LOG2PHYS(pAC, LogPortIndex);
+			
+			Val = GetPhysStatVal(pAC, IoC, PhysPortIndex, StatIndex);
+		}
+	}
+	return (Val);
+}
+
+/*****************************************************************************
+ *
+ * GetPhysStatVal - Get counter value for physical port
+ *
+ * Description:
+ *	Builds a 64bit counter value. Except for the octet counters
+ *	the lower 32bit are counted in hardware and the upper 32bit
+ *	in software by monitoring counter overflow interrupts in the
+ *	event handler. To grant continous counter values during XMAC
+ *	resets (caused by a workaround) we must add a delta value.
+ *	The delta was calculated in the event handler when a
+ *	SK_PNMI_EVT_XMAC_RESET was received.
+ *
+ * Returns:
+ *	Counter value
+ */
+PNMI_STATIC SK_U64 GetPhysStatVal(
+SK_AC *pAC,					/* Pointer to adapter context */
+SK_IOC IoC,					/* IO context handle */
+unsigned int PhysPortIndex,	/* Index of the logical Port to be processed */
+unsigned int StatIndex)		/* Index to statistic value */
+{
+	SK_U64	Val = 0;
+	SK_U32	LowVal = 0;
+	SK_U32	HighVal = 0;
+	SK_U16	Word;
+	int		MacType;
+	unsigned int HelpIndex;
+	SK_GEPORT	*pPrt;
+	
+	SK_PNMI_PORT	*pPnmiPrt;
+	SK_GEMACFUNC	*pFnMac;
+	
+	pPrt = &pAC->GIni.GP[PhysPortIndex];
+	
+	MacType = pAC->GIni.GIMacType;
+	
+	/* 2002-09-17 pweber: For XMAC, use the frozen SW counters (BufPort) */
+	if (MacType == SK_MAC_XMAC) {
+		pPnmiPrt = &pAC->Pnmi.BufPort[PhysPortIndex];
+	}
+	else {
+		pPnmiPrt = &pAC->Pnmi.Port[PhysPortIndex];
+	}
+	
+	pFnMac   = &pAC->GIni.GIFunc;
+
+	switch (StatIndex) {
+	case SK_PNMI_HTX:
+		if (MacType == SK_MAC_GMAC) {
+			(void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex,
+							StatAddr[SK_PNMI_HTX_BROADCAST][MacType].Reg,
+							&LowVal);
+			(void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex,
+							StatAddr[SK_PNMI_HTX_MULTICAST][MacType].Reg,
+							&HighVal);
+			LowVal += HighVal;
+			(void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex,
+							StatAddr[SK_PNMI_HTX_UNICAST][MacType].Reg,
+							&HighVal);
+			LowVal += HighVal;
+		}
+		else {
+			(void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex,
+										  StatAddr[StatIndex][MacType].Reg,
+										  &LowVal);
+		}
+		HighVal = pPnmiPrt->CounterHigh[StatIndex];
+		break;
+	
+	case SK_PNMI_HRX:
+		if (MacType == SK_MAC_GMAC) {
+			(void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex,
+							StatAddr[SK_PNMI_HRX_BROADCAST][MacType].Reg,
+							&LowVal);
+			(void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex,
+							StatAddr[SK_PNMI_HRX_MULTICAST][MacType].Reg,
+							&HighVal);
+			LowVal += HighVal;
+			(void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex,
+							StatAddr[SK_PNMI_HRX_UNICAST][MacType].Reg,
+							&HighVal);
+			LowVal += HighVal;
+		}
+		else {
+			(void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex,
+										  StatAddr[StatIndex][MacType].Reg,
+										  &LowVal);
+		}
+		HighVal = pPnmiPrt->CounterHigh[StatIndex];
+		break;
+
+	case SK_PNMI_HTX_OCTET:
+	case SK_PNMI_HRX_OCTET:
+		(void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex,
+									  StatAddr[StatIndex][MacType].Reg,
+									  &HighVal);
+		(void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex,
+									  StatAddr[StatIndex + 1][MacType].Reg,
+									  &LowVal);
+		break;
+
+	case SK_PNMI_HTX_BURST:
+	case SK_PNMI_HTX_EXCESS_DEF:
+	case SK_PNMI_HTX_CARRIER:
+		/* Not supported by GMAC */
+		if (MacType == SK_MAC_GMAC) {
+			return (Val);
+		}
+
+		(void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex,
+									  StatAddr[StatIndex][MacType].Reg,
+									  &LowVal);
+		HighVal = pPnmiPrt->CounterHigh[StatIndex];
+		break;
+
+	case SK_PNMI_HTX_MACC:
+		/* GMAC only supports PAUSE MAC control frames */
+		if (MacType == SK_MAC_GMAC) {
+			HelpIndex = SK_PNMI_HTX_PMACC;
+		}
+		else {
+			HelpIndex = StatIndex;
+		}
+		
+		(void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex,
+								StatAddr[HelpIndex][MacType].Reg,
+								&LowVal);
+
+		HighVal = pPnmiPrt->CounterHigh[StatIndex];
+		break;
+
+	case SK_PNMI_HTX_COL:
+	case SK_PNMI_HRX_UNDERSIZE:
+		/* Not supported by XMAC */
+		if (MacType == SK_MAC_XMAC) {
+			return (Val);
+		}
+
+		(void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex,
+									  StatAddr[StatIndex][MacType].Reg,
+									  &LowVal);
+		HighVal = pPnmiPrt->CounterHigh[StatIndex];
+		break;
+
+	case SK_PNMI_HTX_DEFFERAL:
+		/* Not supported by GMAC */
+		if (MacType == SK_MAC_GMAC) {
+			return (Val);
+		}
+		
+		/*
+		 * XMAC counts frames with deferred transmission
+		 * even in full-duplex mode.
+		 *
+		 * In full-duplex mode the counter remains constant!
+		 */
+		if ((pPrt->PLinkModeStatus == SK_LMODE_STAT_AUTOFULL) ||
+			(pPrt->PLinkModeStatus == SK_LMODE_STAT_FULL)) {
+
+			LowVal = 0;
+			HighVal = 0;
+		}
+		else {
+			/* Otherwise get contents of hardware register */
+			(void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex,
+										  StatAddr[StatIndex][MacType].Reg,
+										  &LowVal);
+			HighVal = pPnmiPrt->CounterHigh[StatIndex];
+		}
+		break;
+
+	case SK_PNMI_HRX_BADOCTET:
+		/* Not supported by XMAC */
+		if (MacType == SK_MAC_XMAC) {
+			return (Val);
+		}
+
+		(void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex,
+									  StatAddr[StatIndex][MacType].Reg,
+									  &HighVal);
+		(void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex,
+									  StatAddr[StatIndex + 1][MacType].Reg,
+                                      &LowVal);
+		break;
+
+	case SK_PNMI_HTX_OCTETLOW:
+	case SK_PNMI_HRX_OCTETLOW:
+	case SK_PNMI_HRX_BADOCTETLOW:
+		return (Val);
+
+	case SK_PNMI_HRX_LONGFRAMES:
+		/* For XMAC the SW counter is managed by PNMI */
+		if (MacType == SK_MAC_XMAC) {
+			return (pPnmiPrt->StatRxLongFrameCts);
+		}
+		
+		(void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex,
+									  StatAddr[StatIndex][MacType].Reg,
+									  &LowVal);
+		HighVal = pPnmiPrt->CounterHigh[StatIndex];
+		break;
+		
+	case SK_PNMI_HRX_TOO_LONG:
+		(void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex,
+								StatAddr[StatIndex][MacType].Reg,
+								&LowVal);
+		HighVal = pPnmiPrt->CounterHigh[StatIndex];
+		
+		Val = (((SK_U64)HighVal << 32) | (SK_U64)LowVal);
+
+		if (MacType == SK_MAC_GMAC) {
+			/* For GMAC the SW counter is additionally managed by PNMI */
+			Val += pPnmiPrt->StatRxFrameTooLongCts;
+		}
+		else {
+			/*
+			 * Frames longer than IEEE 802.3 frame max size are counted
+			 * by XMAC in frame_too_long counter even reception of long
+			 * frames was enabled and the frame was correct.
+			 * So correct the value by subtracting RxLongFrame counter.
+			 */
+			Val -= pPnmiPrt->StatRxLongFrameCts;
+		}
+
+		LowVal = (SK_U32)Val;
+		HighVal = (SK_U32)(Val >> 32);
+		break;
+		
+	case SK_PNMI_HRX_SHORTS:
+		/* Not supported by GMAC */
+		if (MacType == SK_MAC_GMAC) {
+			/* GM_RXE_FRAG?? */
+			return (Val);
+		}
+		
+		/*
+		 * XMAC counts short frame errors even if link down (#10620)
+		 *
+		 * If link-down the counter remains constant
+		 */
+		if (pPrt->PLinkModeStatus != SK_LMODE_STAT_UNKNOWN) {
+
+			/* Otherwise get incremental difference */
+			(void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex,
+										  StatAddr[StatIndex][MacType].Reg,
+										  &LowVal);
+			HighVal = pPnmiPrt->CounterHigh[StatIndex];
+
+			Val = (((SK_U64)HighVal << 32) | (SK_U64)LowVal);
+			Val -= pPnmiPrt->RxShortZeroMark;
+
+			LowVal = (SK_U32)Val;
+			HighVal = (SK_U32)(Val >> 32);
+		}
+		break;
+
+	case SK_PNMI_HRX_MACC:
+	case SK_PNMI_HRX_MACC_UNKWN:
+	case SK_PNMI_HRX_BURST:
+	case SK_PNMI_HRX_MISSED:
+	case SK_PNMI_HRX_FRAMING:
+	case SK_PNMI_HRX_CARRIER:
+	case SK_PNMI_HRX_IRLENGTH:
+	case SK_PNMI_HRX_SYMBOL:
+	case SK_PNMI_HRX_CEXT:
+		/* Not supported by GMAC */
+		if (MacType == SK_MAC_GMAC) {
+			return (Val);
+		}
+
+		(void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex,
+									  StatAddr[StatIndex][MacType].Reg,
+									  &LowVal);
+		HighVal = pPnmiPrt->CounterHigh[StatIndex];
+		break;
+
+	case SK_PNMI_HRX_PMACC_ERR:
+		/* For GMAC the SW counter is managed by PNMI */
+		if (MacType == SK_MAC_GMAC) {
+			return (pPnmiPrt->StatRxPMaccErr);
+		}
+		
+		(void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex,
+									  StatAddr[StatIndex][MacType].Reg,
+									  &LowVal);
+		HighVal = pPnmiPrt->CounterHigh[StatIndex];
+		break;
+
+	/* SW counter managed by PNMI */
+	case SK_PNMI_HTX_SYNC:
+		LowVal = (SK_U32)pPnmiPrt->StatSyncCts;
+		HighVal = (SK_U32)(pPnmiPrt->StatSyncCts >> 32);
+		break;
+
+	/* SW counter managed by PNMI */
+	case SK_PNMI_HTX_SYNC_OCTET:
+		LowVal = (SK_U32)pPnmiPrt->StatSyncOctetsCts;
+		HighVal = (SK_U32)(pPnmiPrt->StatSyncOctetsCts >> 32);
+		break;
+
+	case SK_PNMI_HRX_FCS:
+		/*
+		 * Broadcom filters FCS errors and counts it in
+		 * Receive Error Counter register
+		 */
+		if (pPrt->PhyType == SK_PHY_BCOM) {
+			/* do not read while not initialized (PHY_READ hangs!)*/
+			if (pPrt->PState != SK_PRT_RESET) {
+				SkXmPhyRead(pAC, IoC, PhysPortIndex, PHY_BCOM_RE_CTR, &Word);
+				
+				LowVal = Word;
+			}
+			HighVal = pPnmiPrt->CounterHigh[StatIndex];
+		}
+		else {
+			(void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex,
+										  StatAddr[StatIndex][MacType].Reg,
+										  &LowVal);
+			HighVal = pPnmiPrt->CounterHigh[StatIndex];
+		}
+		break;
+
+	default:
+		(void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex,
+									  StatAddr[StatIndex][MacType].Reg,
+									  &LowVal);
+		HighVal = pPnmiPrt->CounterHigh[StatIndex];
+		break;
+	}
+
+	Val = (((SK_U64)HighVal << 32) | (SK_U64)LowVal);
+
+	/* Correct value because of possible XMAC reset. XMAC Errata #2 */
+	Val += pPnmiPrt->CounterOffset[StatIndex];
+
+	return (Val);
+}
+
+/*****************************************************************************
+ *
+ * ResetCounter - Set all counters and timestamps to zero
+ *
+ * Description:
+ *	Notifies other common modules which store statistic data to
+ *	reset their counters and finally reset our own counters.
+ *
+ * Returns:
+ *	Nothing
+ */
+PNMI_STATIC void ResetCounter(
+SK_AC *pAC,		/* Pointer to adapter context */
+SK_IOC IoC,		/* IO context handle */
+SK_U32 NetIndex)
+{
+	unsigned int	PhysPortIndex;
+	SK_EVPARA	EventParam;
+
+
+	SK_MEMSET((char *)&EventParam, 0, sizeof(EventParam));
+
+	/* Notify sensor module */
+	SkEventQueue(pAC, SKGE_I2C, SK_I2CEV_CLEAR, EventParam);
+
+	/* Notify RLMT module */
+	EventParam.Para32[0] = NetIndex;
+	EventParam.Para32[1] = (SK_U32)-1;
+	SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_STATS_CLEAR, EventParam);
+	EventParam.Para32[1] = 0;
+
+	/* Notify SIRQ module */
+	SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_CLEAR_STAT, EventParam);
+
+	/* Notify CSUM module */
+#ifdef SK_USE_CSUM
+	EventParam.Para32[0] = NetIndex;
+	EventParam.Para32[1] = (SK_U32)-1;
+	SkEventQueue(pAC, SKGE_CSUM, SK_CSUM_EVENT_CLEAR_PROTO_STATS,
+		EventParam);
+#endif /* SK_USE_CSUM */
+	
+	/* Clear XMAC statistic */
+	for (PhysPortIndex = 0; PhysPortIndex <
+		(unsigned int)pAC->GIni.GIMacsFound; PhysPortIndex ++) {
+
+		(void)pAC->GIni.GIFunc.pFnMacResetCounter(pAC, IoC, PhysPortIndex);
+
+		SK_MEMSET((char *)&pAC->Pnmi.Port[PhysPortIndex].CounterHigh,
+			0, sizeof(pAC->Pnmi.Port[PhysPortIndex].CounterHigh));
+		SK_MEMSET((char *)&pAC->Pnmi.Port[PhysPortIndex].
+			CounterOffset, 0, sizeof(pAC->Pnmi.Port[
+			PhysPortIndex].CounterOffset));
+		SK_MEMSET((char *)&pAC->Pnmi.Port[PhysPortIndex].StatSyncCts,
+			0, sizeof(pAC->Pnmi.Port[PhysPortIndex].StatSyncCts));
+		SK_MEMSET((char *)&pAC->Pnmi.Port[PhysPortIndex].
+			StatSyncOctetsCts, 0, sizeof(pAC->Pnmi.Port[
+			PhysPortIndex].StatSyncOctetsCts));
+		SK_MEMSET((char *)&pAC->Pnmi.Port[PhysPortIndex].
+			StatRxLongFrameCts, 0, sizeof(pAC->Pnmi.Port[
+			PhysPortIndex].StatRxLongFrameCts));
+		SK_MEMSET((char *)&pAC->Pnmi.Port[PhysPortIndex].
+				  StatRxFrameTooLongCts, 0, sizeof(pAC->Pnmi.Port[
+			PhysPortIndex].StatRxFrameTooLongCts));
+		SK_MEMSET((char *)&pAC->Pnmi.Port[PhysPortIndex].
+				  StatRxPMaccErr, 0, sizeof(pAC->Pnmi.Port[
+			PhysPortIndex].StatRxPMaccErr));
+	}
+
+	/*
+	 * Clear local statistics
+	 */
+	SK_MEMSET((char *)&pAC->Pnmi.VirtualCounterOffset, 0,
+		  sizeof(pAC->Pnmi.VirtualCounterOffset));
+	pAC->Pnmi.RlmtChangeCts = 0;
+	pAC->Pnmi.RlmtChangeTime = 0;
+	SK_MEMSET((char *)&pAC->Pnmi.RlmtChangeEstimate.EstValue[0], 0,
+		sizeof(pAC->Pnmi.RlmtChangeEstimate.EstValue));
+	pAC->Pnmi.RlmtChangeEstimate.EstValueIndex = 0;
+	pAC->Pnmi.RlmtChangeEstimate.Estimate = 0;
+	pAC->Pnmi.Port[NetIndex].TxSwQueueMax = 0;
+	pAC->Pnmi.Port[NetIndex].TxRetryCts = 0;
+	pAC->Pnmi.Port[NetIndex].RxIntrCts = 0;
+	pAC->Pnmi.Port[NetIndex].TxIntrCts = 0;
+	pAC->Pnmi.Port[NetIndex].RxNoBufCts = 0;
+	pAC->Pnmi.Port[NetIndex].TxNoBufCts = 0;
+	pAC->Pnmi.Port[NetIndex].TxUsedDescrNo = 0;
+	pAC->Pnmi.Port[NetIndex].RxDeliveredCts = 0;
+	pAC->Pnmi.Port[NetIndex].RxOctetsDeliveredCts = 0;
+	pAC->Pnmi.Port[NetIndex].ErrRecoveryCts = 0;
+}
+
+/*****************************************************************************
+ *
+ * GetTrapEntry - Get an entry in the trap buffer
+ *
+ * Description:
+ *	The trap buffer stores various events. A user application somehow
+ *	gets notified that an event occured and retrieves the trap buffer
+ *	contens (or simply polls the buffer). The buffer is organized as
+ *	a ring which stores the newest traps at the beginning. The oldest
+ *	traps are overwritten by the newest ones. Each trap entry has a
+ *	unique number, so that applications may detect new trap entries.
+ *
+ * Returns:
+ *	A pointer to the trap entry
+ */
+PNMI_STATIC char* GetTrapEntry(
+SK_AC *pAC,		/* Pointer to adapter context */
+SK_U32 TrapId,		/* SNMP ID of the trap */
+unsigned int Size)	/* Space needed for trap entry */
+{
+	unsigned int		BufPad = pAC->Pnmi.TrapBufPad;
+	unsigned int		BufFree = pAC->Pnmi.TrapBufFree;
+	unsigned int		Beg = pAC->Pnmi.TrapQueueBeg;
+	unsigned int		End = pAC->Pnmi.TrapQueueEnd;
+	char			*pBuf = &pAC->Pnmi.TrapBuf[0];
+	int			Wrap;
+	unsigned int		NeededSpace;
+	unsigned int		EntrySize;
+	SK_U32			Val32;
+	SK_U64			Val64;
+
+
+	/* Last byte of entry will get a copy of the entry length */
+	Size ++;
+
+	/*
+	 * Calculate needed buffer space */
+	if (Beg >= Size) {
+
+		NeededSpace = Size;
+		Wrap = SK_FALSE;
+	}
+	else {
+		NeededSpace = Beg + Size;
+		Wrap = SK_TRUE;
+	}
+
+	/*
+	 * Check if enough buffer space is provided. Otherwise
+	 * free some entries. Leave one byte space between begin
+	 * and end of buffer to make it possible to detect whether
+	 * the buffer is full or empty
+	 */
+	while (BufFree < NeededSpace + 1) {
+
+		if (End == 0) {
+
+			End = SK_PNMI_TRAP_QUEUE_LEN;
+		}
+
+		EntrySize = (unsigned int)*((unsigned char *)pBuf + End - 1);
+		BufFree += EntrySize;
+		End -= EntrySize;
+#ifdef DEBUG
+		SK_MEMSET(pBuf + End, (char)(-1), EntrySize);
+#endif /* DEBUG */
+		if (End == BufPad) {
+#ifdef DEBUG
+			SK_MEMSET(pBuf, (char)(-1), End);
+#endif /* DEBUG */
+			BufFree += End;
+			End = 0;
+			BufPad = 0;
+		}
+	}
+
+	/*
+	 * Insert new entry as first entry. Newest entries are
+	 * stored at the beginning of the queue.
+	 */
+	if (Wrap) {
+
+		BufPad = Beg;
+		Beg = SK_PNMI_TRAP_QUEUE_LEN - Size;
+	}
+	else {
+		Beg = Beg - Size;
+	}
+	BufFree -= NeededSpace;
+
+	/* Save the current offsets */
+	pAC->Pnmi.TrapQueueBeg = Beg;
+	pAC->Pnmi.TrapQueueEnd = End;
+	pAC->Pnmi.TrapBufPad = BufPad;
+	pAC->Pnmi.TrapBufFree = BufFree;
+
+	/* Initialize the trap entry */
+	*(pBuf + Beg + Size - 1) = (char)Size;
+	*(pBuf + Beg) = (char)Size;
+	Val32 = (pAC->Pnmi.TrapUnique) ++;
+	SK_PNMI_STORE_U32(pBuf + Beg + 1, Val32);
+	SK_PNMI_STORE_U32(pBuf + Beg + 1 + sizeof(SK_U32), TrapId);
+	Val64 = SK_PNMI_HUNDREDS_SEC(SkOsGetTime(pAC));
+	SK_PNMI_STORE_U64(pBuf + Beg + 1 + 2 * sizeof(SK_U32), Val64);
+
+	return (pBuf + Beg);
+}
+
+/*****************************************************************************
+ *
+ * CopyTrapQueue - Copies the trap buffer for the TRAP OID
+ *
+ * Description:
+ *	On a query of the TRAP OID the trap buffer contents will be
+ *	copied continuously to the request buffer, which must be large
+ *	enough. No length check is performed.
+ *
+ * Returns:
+ *	Nothing
+ */
+PNMI_STATIC void CopyTrapQueue(
+SK_AC *pAC,		/* Pointer to adapter context */
+char *pDstBuf)		/* Buffer to which the queued traps will be copied */
+{
+	unsigned int	BufPad = pAC->Pnmi.TrapBufPad;
+	unsigned int	Trap = pAC->Pnmi.TrapQueueBeg;
+	unsigned int	End = pAC->Pnmi.TrapQueueEnd;
+	char		*pBuf = &pAC->Pnmi.TrapBuf[0];
+	unsigned int	Len;
+	unsigned int	DstOff = 0;
+
+
+	while (Trap != End) {
+
+		Len = (unsigned int)*(pBuf + Trap);
+
+		/*
+		 * Last byte containing a copy of the length will
+		 * not be copied.
+		 */
+		*(pDstBuf + DstOff) = (char)(Len - 1);
+		SK_MEMCPY(pDstBuf + DstOff + 1, pBuf + Trap + 1, Len - 2);
+		DstOff += Len - 1;
+
+		Trap += Len;
+		if (Trap == SK_PNMI_TRAP_QUEUE_LEN) {
+
+			Trap = BufPad;
+		}
+	}
+}
+
+/*****************************************************************************
+ *
+ * GetTrapQueueLen - Get the length of the trap buffer
+ *
+ * Description:
+ *	Evaluates the number of currently stored traps and the needed
+ *	buffer size to retrieve them.
+ *
+ * Returns:
+ *	Nothing
+ */
+PNMI_STATIC void GetTrapQueueLen(
+SK_AC *pAC,		/* Pointer to adapter context */
+unsigned int *pLen,	/* Length in Bytes of all queued traps */
+unsigned int *pEntries)	/* Returns number of trapes stored in queue */
+{
+	unsigned int	BufPad = pAC->Pnmi.TrapBufPad;
+	unsigned int	Trap = pAC->Pnmi.TrapQueueBeg;
+	unsigned int	End = pAC->Pnmi.TrapQueueEnd;
+	char		*pBuf = &pAC->Pnmi.TrapBuf[0];
+	unsigned int	Len;
+	unsigned int	Entries = 0;
+	unsigned int	TotalLen = 0;
+
+
+	while (Trap != End) {
+
+		Len = (unsigned int)*(pBuf + Trap);
+		TotalLen += Len - 1;
+		Entries ++;
+
+		Trap += Len;
+		if (Trap == SK_PNMI_TRAP_QUEUE_LEN) {
+
+			Trap = BufPad;
+		}
+	}
+
+	*pEntries = Entries;
+	*pLen = TotalLen;
+}
+
+/*****************************************************************************
+ *
+ * QueueSimpleTrap - Store a simple trap to the trap buffer
+ *
+ * Description:
+ *	A simple trap is a trap with now additional data. It consists
+ *	simply of a trap code.
+ *
+ * Returns:
+ *	Nothing
+ */
+PNMI_STATIC void QueueSimpleTrap(
+SK_AC *pAC,		/* Pointer to adapter context */
+SK_U32 TrapId)		/* Type of sensor trap */
+{
+	GetTrapEntry(pAC, TrapId, SK_PNMI_TRAP_SIMPLE_LEN);
+}
+
+/*****************************************************************************
+ *
+ * QueueSensorTrap - Stores a sensor trap in the trap buffer
+ *
+ * Description:
+ *	Gets an entry in the trap buffer and fills it with sensor related
+ *	data.
+ *
+ * Returns:
+ *	Nothing
+ */
+PNMI_STATIC void QueueSensorTrap(
+SK_AC *pAC,			/* Pointer to adapter context */
+SK_U32 TrapId,			/* Type of sensor trap */
+unsigned int SensorIndex)	/* Index of sensor which caused the trap */
+{
+	char		*pBuf;
+	unsigned int	Offset;
+	unsigned int	DescrLen;
+	SK_U32		Val32;
+
+
+	/* Get trap buffer entry */
+	DescrLen = SK_STRLEN(pAC->I2c.SenTable[SensorIndex].SenDesc);
+	pBuf = GetTrapEntry(pAC, TrapId,
+		SK_PNMI_TRAP_SENSOR_LEN_BASE + DescrLen);
+	Offset = SK_PNMI_TRAP_SIMPLE_LEN;
+
+	/* Store additionally sensor trap related data */
+	Val32 = OID_SKGE_SENSOR_INDEX;
+	SK_PNMI_STORE_U32(pBuf + Offset, Val32);
+	*(pBuf + Offset + 4) = 4;
+	Val32 = (SK_U32)SensorIndex;
+	SK_PNMI_STORE_U32(pBuf + Offset + 5, Val32);
+	Offset += 9;
+	
+	Val32 = (SK_U32)OID_SKGE_SENSOR_DESCR;
+	SK_PNMI_STORE_U32(pBuf + Offset, Val32);
+	*(pBuf + Offset + 4) = (char)DescrLen;
+	SK_MEMCPY(pBuf + Offset + 5, pAC->I2c.SenTable[SensorIndex].SenDesc,
+		DescrLen);
+	Offset += DescrLen + 5;
+
+	Val32 = OID_SKGE_SENSOR_TYPE;
+	SK_PNMI_STORE_U32(pBuf + Offset, Val32);
+	*(pBuf + Offset + 4) = 1;
+	*(pBuf + Offset + 5) = (char)pAC->I2c.SenTable[SensorIndex].SenType;
+	Offset += 6;
+
+	Val32 = OID_SKGE_SENSOR_VALUE;
+	SK_PNMI_STORE_U32(pBuf + Offset, Val32);
+	*(pBuf + Offset + 4) = 4;
+	Val32 = (SK_U32)pAC->I2c.SenTable[SensorIndex].SenValue;
+	SK_PNMI_STORE_U32(pBuf + Offset + 5, Val32);
+}
+
+/*****************************************************************************
+ *
+ * QueueRlmtNewMacTrap - Store a port switch trap in the trap buffer
+ *
+ * Description:
+ *	Nothing further to explain.
+ *
+ * Returns:
+ *	Nothing
+ */
+PNMI_STATIC void QueueRlmtNewMacTrap(
+SK_AC *pAC,		/* Pointer to adapter context */
+unsigned int ActiveMac)	/* Index (0..n) of the currently active port */
+{
+	char	*pBuf;
+	SK_U32	Val32;
+
+
+	pBuf = GetTrapEntry(pAC, OID_SKGE_TRAP_RLMT_CHANGE_PORT,
+		SK_PNMI_TRAP_RLMT_CHANGE_LEN);
+
+	Val32 = OID_SKGE_RLMT_PORT_ACTIVE;
+	SK_PNMI_STORE_U32(pBuf + SK_PNMI_TRAP_SIMPLE_LEN, Val32);
+	*(pBuf + SK_PNMI_TRAP_SIMPLE_LEN + 4) = 1;
+	*(pBuf + SK_PNMI_TRAP_SIMPLE_LEN + 5) = (char)ActiveMac;
+}
+
+/*****************************************************************************
+ *
+ * QueueRlmtPortTrap - Store port related RLMT trap to trap buffer
+ *
+ * Description:
+ *	Nothing further to explain.
+ *
+ * Returns:
+ *	Nothing
+ */
+PNMI_STATIC void QueueRlmtPortTrap(
+SK_AC *pAC,		/* Pointer to adapter context */
+SK_U32 TrapId,		/* Type of RLMT port trap */
+unsigned int PortIndex)	/* Index of the port, which changed its state */
+{
+	char	*pBuf;
+	SK_U32	Val32;
+
+
+	pBuf = GetTrapEntry(pAC, TrapId, SK_PNMI_TRAP_RLMT_PORT_LEN);
+
+	Val32 = OID_SKGE_RLMT_PORT_INDEX;
+	SK_PNMI_STORE_U32(pBuf + SK_PNMI_TRAP_SIMPLE_LEN, Val32);
+	*(pBuf + SK_PNMI_TRAP_SIMPLE_LEN + 4) = 1;
+	*(pBuf + SK_PNMI_TRAP_SIMPLE_LEN + 5) = (char)PortIndex;
+}
+
+/*****************************************************************************
+ *
+ * CopyMac - Copies a MAC address
+ *
+ * Description:
+ *	Nothing further to explain.
+ *
+ * Returns:
+ *	Nothing
+ */
+PNMI_STATIC void CopyMac(
+char *pDst,		/* Pointer to destination buffer */
+SK_MAC_ADDR *pMac)	/* Pointer of Source */
+{
+	int	i;
+
+
+	for (i = 0; i < sizeof(SK_MAC_ADDR); i ++) {
+
+		*(pDst + i) = pMac->a[i];
+	}
+}
+
+#ifdef SK_POWER_MGMT
+/*****************************************************************************
+ *
+ * PowerManagement - OID handler function of PowerManagement OIDs
+ *
+ * Description:
+ *	The code is simple. No description necessary.
+ *
+ * Returns:
+ *	SK_PNMI_ERR_OK           The request was successfully performed.
+ *	SK_PNMI_ERR_GENERAL      A general severe internal error occured.
+ *	SK_PNMI_ERR_TOO_SHORT    The passed buffer is too short to contain
+ *	                         the correct data (e.g. a 32bit value is
+ *	                         needed, but a 16 bit value was passed).
+ *	SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't
+ *                               exist (e.g. port instance 3 on a two port
+ *	                         adapter.
+ */
+
+PNMI_STATIC int PowerManagement(
+SK_AC *pAC,		/* Pointer to adapter context */
+SK_IOC IoC,		/* IO context handle */
+int Action,		/* Get/PreSet/Set action */
+SK_U32 Id,		/* Object ID that is to be processed */
+char *pBuf,		/* Buffer to which to mgmt data will be retrieved */
+unsigned int *pLen,	/* On call: buffer length. On return: used buffer */
+SK_U32 Instance,	/* Instance (1..n) that is to be queried or -1 */
+unsigned int TableIndex, /* Index to the Id table */
+SK_U32 NetIndex)	/* NetIndex (0..n), in single net mode allways zero */
+{
+	
+	SK_U32	RetCode = SK_PNMI_ERR_GENERAL;
+
+	/*
+	 * Check instance. We only handle single instance variables
+	 */
+	if (Instance != (SK_U32)(-1) && Instance != 1) {
+
+		*pLen = 0;
+		return (SK_PNMI_ERR_UNKNOWN_INST);
+	}
+	
+    
+    /* Check length */
+    switch (Id) {
+
+    case OID_PNP_CAPABILITIES:
+        if (*pLen < sizeof(SK_PNP_CAPABILITIES)) {
+
+            *pLen = sizeof(SK_PNP_CAPABILITIES);
+            return (SK_PNMI_ERR_TOO_SHORT);
+        }
+        break;
+
+	case OID_PNP_SET_POWER:
+    case OID_PNP_QUERY_POWER:
+    	if (*pLen < sizeof(SK_DEVICE_POWER_STATE))
+    	{
+    		*pLen = sizeof(SK_DEVICE_POWER_STATE);
+    		return (SK_PNMI_ERR_TOO_SHORT);
+    	}
+        break;
+
+    case OID_PNP_ADD_WAKE_UP_PATTERN:
+    case OID_PNP_REMOVE_WAKE_UP_PATTERN:
+		if (*pLen < sizeof(SK_PM_PACKET_PATTERN)) {
+
+			*pLen = sizeof(SK_PM_PACKET_PATTERN);
+			return (SK_PNMI_ERR_TOO_SHORT);
+		}
+		break;
+
+    case OID_PNP_ENABLE_WAKE_UP:
+        if (*pLen < sizeof(SK_U32)) {
+
+            *pLen = sizeof(SK_U32);
+            return (SK_PNMI_ERR_TOO_SHORT);
+        }
+        break;
+    }
+	
+    /*
+	 * Perform action
+	 */
+	if (Action == SK_PNMI_GET) {
+
+		/*
+		 * Get value
+		 */
+		switch (Id) {
+
+		case OID_PNP_CAPABILITIES:
+			RetCode = SkPowerQueryPnPCapabilities(pAC, IoC, pBuf, pLen);
+			break;
+
+		case OID_PNP_QUERY_POWER:
+			/* The Windows DDK describes: An OID_PNP_QUERY_POWER requests
+			 the miniport to indicate whether it can transition its NIC
+			 to the low-power state.
+			 A miniport driver must always return NDIS_STATUS_SUCCESS
+			 to a query of OID_PNP_QUERY_POWER. */
+			*pLen = sizeof(SK_DEVICE_POWER_STATE);
+            RetCode = SK_PNMI_ERR_OK;
+			break;
+
+			/* NDIS handles these OIDs as write-only.
+			 * So in case of get action the buffer with written length = 0
+			 * is returned
+			 */
+		case OID_PNP_SET_POWER:
+		case OID_PNP_ADD_WAKE_UP_PATTERN:
+		case OID_PNP_REMOVE_WAKE_UP_PATTERN:
+			*pLen = 0;	
+            RetCode = SK_PNMI_ERR_NOT_SUPPORTED;
+			break;
+
+		case OID_PNP_ENABLE_WAKE_UP:
+			RetCode = SkPowerGetEnableWakeUp(pAC, IoC, pBuf, pLen);
+			break;
+
+		default:
+			RetCode = SK_PNMI_ERR_GENERAL;
+			break;
+		}
+
+		return (RetCode);
+	}
+	
+
+	/*
+	 * Perform preset or set
+	 */
+	
+	/* POWER module does not support PRESET action */
+	if (Action == SK_PNMI_PRESET) {
+		return (SK_PNMI_ERR_OK);
+	}
+
+	switch (Id) {
+	case OID_PNP_SET_POWER:
+		RetCode = SkPowerSetPower(pAC, IoC, pBuf, pLen);	
+		break;
+
+	case OID_PNP_ADD_WAKE_UP_PATTERN:
+		RetCode = SkPowerAddWakeUpPattern(pAC, IoC, pBuf, pLen);	
+		break;
+		
+	case OID_PNP_REMOVE_WAKE_UP_PATTERN:
+		RetCode = SkPowerRemoveWakeUpPattern(pAC, IoC, pBuf, pLen);	
+		break;
+		
+	case OID_PNP_ENABLE_WAKE_UP:
+		RetCode = SkPowerSetEnableWakeUp(pAC, IoC, pBuf, pLen);
+		break;
+		
+	default:
+		RetCode = SK_PNMI_ERR_READ_ONLY;
+	}
+	
+	return (RetCode);
+}
+#endif /* SK_POWER_MGMT */
+
+#ifdef SK_DIAG_SUPPORT
+/*****************************************************************************
+ *
+ * DiagActions - OID handler function of Diagnostic driver 
+ *
+ * Description:
+ *	The code is simple. No description necessary.
+ *
+ * Returns:
+ *	SK_PNMI_ERR_OK           The request was successfully performed.
+ *	SK_PNMI_ERR_GENERAL      A general severe internal error occured.
+ *	SK_PNMI_ERR_TOO_SHORT    The passed buffer is too short to contain
+ *	                         the correct data (e.g. a 32bit value is
+ *	                         needed, but a 16 bit value was passed).
+ *	SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't
+ *                           exist (e.g. port instance 3 on a two port
+ *	                         adapter.
+ */
+
+PNMI_STATIC int DiagActions(
+SK_AC *pAC,		/* Pointer to adapter context */
+SK_IOC IoC,		/* IO context handle */
+int Action,		/* GET/PRESET/SET action */
+SK_U32 Id,		/* Object ID that is to be processed */
+char *pBuf,		/* Buffer used for the management data transfer */
+unsigned int *pLen,	/* On call: pBuf buffer length. On return: used buffer */
+SK_U32 Instance,	/* Instance (1..n) that is to be queried or -1 */
+unsigned int TableIndex, /* Index to the Id table */
+SK_U32 NetIndex)	/* NetIndex (0..n), in single net mode always zero */
+{
+
+	SK_U32	DiagStatus;
+	SK_U32	RetCode = SK_PNMI_ERR_GENERAL;
+
+	/*
+	 * Check instance. We only handle single instance variables.
+	 */
+	if (Instance != (SK_U32)(-1) && Instance != 1) {
+
+		*pLen = 0;
+		return (SK_PNMI_ERR_UNKNOWN_INST);
+	}
+
+	/*
+	 * Check length.
+	 */
+	switch (Id) {
+
+	case OID_SKGE_DIAG_MODE:
+		if (*pLen < sizeof(SK_U32)) {
+
+			*pLen = sizeof(SK_U32);
+			return (SK_PNMI_ERR_TOO_SHORT);
+		}
+		break;
+
+	default:
+		SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR040, SK_PNMI_ERR040MSG);
+		*pLen = 0;
+		return (SK_PNMI_ERR_GENERAL);
+	}
+
+	/* Perform action. */
+
+	/* GET value. */
+	if (Action == SK_PNMI_GET) {
+
+		switch (Id) {
+
+		case OID_SKGE_DIAG_MODE:
+			DiagStatus = pAC->Pnmi.DiagAttached;
+			SK_PNMI_STORE_U32(pBuf, DiagStatus);
+			*pLen = sizeof(SK_U32);	
+			RetCode = SK_PNMI_ERR_OK;
+			break;
+
+		default:
+			*pLen = 0;	
+			RetCode = SK_PNMI_ERR_GENERAL;
+			break;
+		}
+		return (RetCode); 
+	}
+
+	/* From here SET or PRESET value. */
+	
+	/* PRESET value is not supported. */
+	if (Action == SK_PNMI_PRESET) {
+		return (SK_PNMI_ERR_OK); 
+	}
+
+	/* SET value. */
+	switch (Id) {
+		case OID_SKGE_DIAG_MODE:
+
+			/* Handle the SET. */
+			switch (*pBuf) {
+
+				/* Attach the DIAG to this adapter. */
+				case SK_DIAG_ATTACHED:
+					/* Check if we come from running */
+					if (pAC->Pnmi.DiagAttached == SK_DIAG_RUNNING) {
+
+						RetCode = SkDrvLeaveDiagMode(pAC);
+
+					}
+					else if (pAC->Pnmi.DiagAttached == SK_DIAG_IDLE) {
+
+						RetCode = SK_PNMI_ERR_OK;
+					}	
+					
+					else {
+
+						RetCode = SK_PNMI_ERR_GENERAL;
+
+					}
+					
+					if (RetCode == SK_PNMI_ERR_OK) {
+
+						pAC->Pnmi.DiagAttached = SK_DIAG_ATTACHED;
+					}
+					break;
+
+				/* Enter the DIAG mode in the driver. */
+				case SK_DIAG_RUNNING:
+					RetCode = SK_PNMI_ERR_OK;
+					
+					/*
+					 * If DiagAttached is set, we can tell the driver
+					 * to enter the DIAG mode.
+					 */
+					if (pAC->Pnmi.DiagAttached == SK_DIAG_ATTACHED) {
+						/* If DiagMode is not active, we can enter it. */
+						if (!pAC->DiagModeActive) {
+
+							RetCode = SkDrvEnterDiagMode(pAC); 
+						}
+						else {
+
+							RetCode = SK_PNMI_ERR_GENERAL;
+						}
+					}
+					else {
+
+						RetCode = SK_PNMI_ERR_GENERAL;
+					}
+					
+					if (RetCode == SK_PNMI_ERR_OK) {
+
+						pAC->Pnmi.DiagAttached = SK_DIAG_RUNNING;
+					}
+					break;
+
+				case SK_DIAG_IDLE:
+					/* Check if we come from running */
+					if (pAC->Pnmi.DiagAttached == SK_DIAG_RUNNING) {
+
+						RetCode = SkDrvLeaveDiagMode(pAC);
+
+					}
+					else if (pAC->Pnmi.DiagAttached == SK_DIAG_ATTACHED) {
+
+						RetCode = SK_PNMI_ERR_OK;
+					}	
+					
+					else {
+
+						RetCode = SK_PNMI_ERR_GENERAL;
+
+					}
+
+					if (RetCode == SK_PNMI_ERR_OK) {
+
+						pAC->Pnmi.DiagAttached = SK_DIAG_IDLE;
+					}
+					break;
+
+				default:
+					RetCode = SK_PNMI_ERR_BAD_VALUE;
+					break;
+			}
+			break;
+
+		default:
+			RetCode = SK_PNMI_ERR_GENERAL;
+	}
+
+	if (RetCode == SK_PNMI_ERR_OK) {
+		*pLen = sizeof(SK_U32);
+	}
+	else {
+
+		*pLen = 0;
+	}
+	return (RetCode);
+}
+#endif /* SK_DIAG_SUPPORT */
+
+/*****************************************************************************
+ *
+ * Vct - OID handler function of  OIDs
+ *
+ * Description:
+ *	The code is simple. No description necessary.
+ *
+ * Returns:
+ *	SK_PNMI_ERR_OK           The request was performed successfully.
+ *	SK_PNMI_ERR_GENERAL      A general severe internal error occured.
+ *	SK_PNMI_ERR_TOO_SHORT    The passed buffer is too short to contain
+ *	                         the correct data (e.g. a 32bit value is
+ *	                         needed, but a 16 bit value was passed).
+ *	SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't
+ *                           exist (e.g. port instance 3 on a two port
+ *	                         adapter).
+ *	SK_PNMI_ERR_READ_ONLY	 Only the Get action is allowed.
+ *
+ */
+
+PNMI_STATIC int Vct(
+SK_AC *pAC,		/* Pointer to adapter context */
+SK_IOC IoC,		/* IO context handle */
+int Action,		/* GET/PRESET/SET action */
+SK_U32 Id,		/* Object ID that is to be processed */
+char *pBuf,		/* Buffer used for the management data transfer */
+unsigned int *pLen,	/* On call: pBuf buffer length. On return: used buffer */
+SK_U32 Instance,	/* Instance (-1,2..n) that is to be queried */
+unsigned int TableIndex, /* Index to the Id table */
+SK_U32 NetIndex)	/* NetIndex (0..n), in single net mode always zero */
+{
+	SK_GEPORT	*pPrt;
+	SK_PNMI_VCT	*pVctBackupData;
+	SK_U32		LogPortMax;
+	SK_U32		PhysPortMax;
+	SK_U32		PhysPortIndex;
+	SK_U32		Limit;
+	SK_U32		Offset;
+	SK_BOOL		Link;
+	SK_U32		RetCode = SK_PNMI_ERR_GENERAL;
+	int		i;
+	SK_EVPARA	Para;
+	SK_U32		CableLength;
+	
+	/*
+	 * Calculate the port indexes from the instance.
+	 */
+	PhysPortMax = pAC->GIni.GIMacsFound;
+	LogPortMax = SK_PNMI_PORT_PHYS2LOG(PhysPortMax);
+	
+	/* Dual net mode? */
+	if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) {
+		LogPortMax--;
+	}
+	
+	if ((Instance != (SK_U32) (-1))) {
+		/* Check instance range. */
+		if ((Instance < 2) || (Instance > LogPortMax)) {
+			*pLen = 0;
+			return (SK_PNMI_ERR_UNKNOWN_INST);
+		}
+		
+		if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) {
+			PhysPortIndex = NetIndex;
+		}
+		else {
+			PhysPortIndex = Instance - 2;
+		}
+		Limit = PhysPortIndex + 1;
+	}
+	else {
+		/*
+		 * Instance == (SK_U32) (-1), get all Instances of that OID.
+		 *
+		 * Not implemented yet. May be used in future releases.
+		 */
+		PhysPortIndex = 0;
+		Limit = PhysPortMax;
+	}
+	
+	pPrt = &pAC->GIni.GP[PhysPortIndex];
+	if (pPrt->PHWLinkUp) {
+		Link = SK_TRUE;
+	}
+	else {
+		Link = SK_FALSE;
+	}
+	
+	/* Check MAC type */
+	if (pPrt->PhyType != SK_PHY_MARV_COPPER) {
+		*pLen = 0;
+		return (SK_PNMI_ERR_GENERAL);
+	}
+	
+	/* Initialize backup data pointer. */
+	pVctBackupData = &pAC->Pnmi.VctBackup[PhysPortIndex];
+	
+	/* Check action type */
+	if (Action == SK_PNMI_GET) {
+		/* Check length */
+		switch (Id) {
+		
+		case OID_SKGE_VCT_GET:
+			if (*pLen < (Limit - PhysPortIndex) * sizeof(SK_PNMI_VCT)) {
+				*pLen = (Limit - PhysPortIndex) * sizeof(SK_PNMI_VCT);
+				return (SK_PNMI_ERR_TOO_SHORT);
+			}
+			break;
+		
+		case OID_SKGE_VCT_STATUS:
+			if (*pLen < (Limit - PhysPortIndex) * sizeof(SK_U8)) {
+				*pLen = (Limit - PhysPortIndex) * sizeof(SK_U8);
+				return (SK_PNMI_ERR_TOO_SHORT);
+			}
+			break;
+		
+		default:
+			*pLen = 0;
+			return (SK_PNMI_ERR_GENERAL);
+		}	
+		
+		/* Get value */
+		Offset = 0;
+		for (; PhysPortIndex < Limit; PhysPortIndex++) {
+			switch (Id) {
+			
+			case OID_SKGE_VCT_GET:
+				if ((Link == SK_FALSE) &&
+					(pAC->Pnmi.VctStatus[PhysPortIndex] & SK_PNMI_VCT_PENDING)) {
+					RetCode = SkGmCableDiagStatus(pAC, IoC, PhysPortIndex, SK_FALSE);
+					if (RetCode == 0) {
+						pAC->Pnmi.VctStatus[PhysPortIndex] &= ~SK_PNMI_VCT_PENDING;
+						pAC->Pnmi.VctStatus[PhysPortIndex] |=
+							(SK_PNMI_VCT_NEW_VCT_DATA | SK_PNMI_VCT_TEST_DONE);
+						
+						/* Copy results for later use to PNMI struct. */
+						for (i = 0; i < 4; i++)  {
+							if (pPrt->PMdiPairSts[i] == SK_PNMI_VCT_NORMAL_CABLE) {
+								if ((pPrt->PMdiPairLen[i] > 35) && (pPrt->PMdiPairLen[i] < 0xff)) {
+									pPrt->PMdiPairSts[i] = SK_PNMI_VCT_IMPEDANCE_MISMATCH;
+								}
+							}
+							if ((pPrt->PMdiPairLen[i] > 35) && (pPrt->PMdiPairLen[i] != 0xff)) {
+								CableLength = 1000 * (((175 * pPrt->PMdiPairLen[i]) / 210) - 28);
+							}
+							else {
+								CableLength = 0;
+							}
+							pVctBackupData->PMdiPairLen[i] = CableLength;
+							pVctBackupData->PMdiPairSts[i] = pPrt->PMdiPairSts[i];
+						}
+
+						Para.Para32[0] = PhysPortIndex;
+						Para.Para32[1] = -1;
+						SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_RESET, Para);
+						SkEventDispatcher(pAC, IoC);
+					}
+					else {
+						; /* VCT test is running. */
+					}
+				}
+				
+				/* Get all results. */
+				CheckVctStatus(pAC, IoC, pBuf, Offset, PhysPortIndex);
+				Offset += sizeof(SK_U8);
+				*(pBuf + Offset) = pPrt->PCableLen;
+				Offset += sizeof(SK_U8);
+				for (i = 0; i < 4; i++)  {
+					SK_PNMI_STORE_U32((pBuf + Offset), pVctBackupData->PMdiPairLen[i]);
+					Offset += sizeof(SK_U32);
+				}
+				for (i = 0; i < 4; i++)  {
+					*(pBuf + Offset) = pVctBackupData->PMdiPairSts[i];
+					Offset += sizeof(SK_U8);
+				}
+				
+				RetCode = SK_PNMI_ERR_OK;
+				break;
+		
+			case OID_SKGE_VCT_STATUS:
+				CheckVctStatus(pAC, IoC, pBuf, Offset, PhysPortIndex);
+				Offset += sizeof(SK_U8);
+				RetCode = SK_PNMI_ERR_OK;
+				break;
+			
+			default:
+				*pLen = 0;
+				return (SK_PNMI_ERR_GENERAL);
+			}
+		} /* for */
+		*pLen = Offset;
+		return (RetCode);
+	
+	} /* if SK_PNMI_GET */
+	
+	/*
+	 * From here SET or PRESET action. Check if the passed
+	 * buffer length is plausible.
+	 */
+	
+	/* Check length */
+	switch (Id) {
+	case OID_SKGE_VCT_SET:
+		if (*pLen < (Limit - PhysPortIndex) * sizeof(SK_U32)) {
+			*pLen = (Limit - PhysPortIndex) * sizeof(SK_U32);
+			return (SK_PNMI_ERR_TOO_SHORT);
+		}
+		break;
+	
+	default:
+		*pLen = 0;
+		return (SK_PNMI_ERR_GENERAL);
+	}
+	
+	/*
+	 * Perform preset or set.
+	 */
+	
+	/* VCT does not support PRESET action. */
+	if (Action == SK_PNMI_PRESET) {
+		return (SK_PNMI_ERR_OK);
+	}
+	
+	Offset = 0;
+	for (; PhysPortIndex < Limit; PhysPortIndex++) {
+		switch (Id) {
+		case OID_SKGE_VCT_SET: /* Start VCT test. */
+			if (Link == SK_FALSE) {
+				SkGeStopPort(pAC, IoC, PhysPortIndex, SK_STOP_ALL, SK_SOFT_RST);
+				
+				RetCode = SkGmCableDiagStatus(pAC, IoC, PhysPortIndex, SK_TRUE);
+				if (RetCode == 0) { /* RetCode: 0 => Start! */
+					pAC->Pnmi.VctStatus[PhysPortIndex] |= SK_PNMI_VCT_PENDING;
+					pAC->Pnmi.VctStatus[PhysPortIndex] &= ~SK_PNMI_VCT_NEW_VCT_DATA;
+					pAC->Pnmi.VctStatus[PhysPortIndex] &= ~SK_PNMI_VCT_LINK;
+					
+					/*
+					 * Start VCT timer counter.
+					 */
+					SK_MEMSET((char *) &Para, 0, sizeof(Para));
+					Para.Para32[0] = PhysPortIndex;
+					Para.Para32[1] = -1;
+					SkTimerStart(pAC, IoC, &pAC->Pnmi.VctTimeout[PhysPortIndex].VctTimer,
+						4000000, SKGE_PNMI, SK_PNMI_EVT_VCT_RESET, Para);
+					SK_PNMI_STORE_U32((pBuf + Offset), RetCode);
+					RetCode = SK_PNMI_ERR_OK;
+				}
+				else { /* RetCode: 2 => Running! */
+					SK_PNMI_STORE_U32((pBuf + Offset), RetCode);
+					RetCode = SK_PNMI_ERR_OK;
+				}
+			}
+			else { /* RetCode: 4 => Link! */
+				RetCode = 4;
+				SK_PNMI_STORE_U32((pBuf + Offset), RetCode);
+				RetCode = SK_PNMI_ERR_OK;
+			}
+			Offset += sizeof(SK_U32);
+			break;
+	
+		default:
+			*pLen = 0;
+			return (SK_PNMI_ERR_GENERAL);
+		}
+	} /* for */
+	*pLen = Offset;
+	return (RetCode);
+
+} /* Vct */
+
+
+PNMI_STATIC void CheckVctStatus(
+SK_AC		*pAC,
+SK_IOC		IoC,
+char		*pBuf,
+SK_U32		Offset,
+SK_U32		PhysPortIndex)
+{
+	SK_GEPORT 	*pPrt;
+	SK_PNMI_VCT	*pVctData;
+	SK_U32		RetCode;
+	
+	pPrt = &pAC->GIni.GP[PhysPortIndex];
+	
+	pVctData = (SK_PNMI_VCT *) (pBuf + Offset);
+	pVctData->VctStatus = SK_PNMI_VCT_NONE;
+	
+	if (!pPrt->PHWLinkUp) {
+		
+		/* Was a VCT test ever made before? */
+		if (pAC->Pnmi.VctStatus[PhysPortIndex] & SK_PNMI_VCT_TEST_DONE) {
+			if ((pAC->Pnmi.VctStatus[PhysPortIndex] & SK_PNMI_VCT_LINK)) {
+				pVctData->VctStatus |= SK_PNMI_VCT_OLD_VCT_DATA;
+			}
+			else {
+				pVctData->VctStatus |= SK_PNMI_VCT_NEW_VCT_DATA;
+			}
+		}
+		
+		/* Check VCT test status. */
+		RetCode = SkGmCableDiagStatus(pAC,IoC, PhysPortIndex, SK_FALSE);
+		if (RetCode == 2) { /* VCT test is running. */
+			pVctData->VctStatus |= SK_PNMI_VCT_RUNNING;
+		}
+		else { /* VCT data was copied to pAC here. Check PENDING state. */
+			if (pAC->Pnmi.VctStatus[PhysPortIndex] & SK_PNMI_VCT_PENDING) {
+				pVctData->VctStatus |= SK_PNMI_VCT_NEW_VCT_DATA;
+			}
+		}
+		
+		if (pPrt->PCableLen != 0xff) { /* Old DSP value. */
+			pVctData->VctStatus |= SK_PNMI_VCT_OLD_DSP_DATA;
+		}
+	}
+	else {
+		
+		/* Was a VCT test ever made before? */
+		if (pAC->Pnmi.VctStatus[PhysPortIndex] & SK_PNMI_VCT_TEST_DONE) {
+			pVctData->VctStatus &= ~SK_PNMI_VCT_NEW_VCT_DATA;
+			pVctData->VctStatus |= SK_PNMI_VCT_OLD_VCT_DATA;
+		}
+		
+		/* DSP only valid in 100/1000 modes. */
+		if (pAC->GIni.GP[PhysPortIndex].PLinkSpeedUsed !=
+			SK_LSPEED_STAT_10MBPS) {	
+			pVctData->VctStatus |= SK_PNMI_VCT_NEW_DSP_DATA;
+		}
+	}
+} /* CheckVctStatus */
+
+
+/*****************************************************************************
+ *
+ *      SkPnmiGenIoctl - Handles new generic PNMI IOCTL, calls the needed
+ *                       PNMI function depending on the subcommand and
+ *                       returns all data belonging to the complete database
+ *                       or OID request.
+ *
+ * Description:
+ *	Looks up the requested subcommand, calls the corresponding handler
+ *	function and passes all required parameters to it.
+ *	The function is called by the driver. It is needed to handle the new
+ *  generic PNMI IOCTL. This IOCTL is given to the driver and contains both
+ *  the OID and a subcommand to decide what kind of request has to be done.
+ *
+ * Returns:
+ *	SK_PNMI_ERR_OK           The request was successfully performed
+ *	SK_PNMI_ERR_GENERAL      A general severe internal error occured
+ *	SK_PNMI_ERR_TOO_SHORT    The passed buffer is too short to take
+ *	                         the data.
+ *	SK_PNMI_ERR_UNKNOWN_OID  The requested OID is unknown
+ *	SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't
+ *                           exist (e.g. port instance 3 on a two port
+ *	                         adapter.
+ */
+int SkPnmiGenIoctl(
+SK_AC		*pAC,		/* Pointer to adapter context struct */
+SK_IOC		IoC,		/* I/O context */
+void		*pBuf,		/* Buffer used for the management data transfer */
+unsigned int *pLen,		/* Length of buffer */
+SK_U32		NetIndex)	/* NetIndex (0..n), in single net mode always zero */
+{
+SK_I32	Mode;			/* Store value of subcommand. */
+SK_U32	Oid;			/* Store value of OID. */
+int		ReturnCode;		/* Store return value to show status of PNMI action. */
+int 	HeaderLength;	/* Length of desired action plus OID. */
+
+	ReturnCode = SK_PNMI_ERR_GENERAL;
+	
+	SK_MEMCPY(&Mode, pBuf, sizeof(SK_I32));
+	SK_MEMCPY(&Oid, (char *) pBuf + sizeof(SK_I32), sizeof(SK_U32));
+	HeaderLength = sizeof(SK_I32) + sizeof(SK_U32);
+	*pLen = *pLen - HeaderLength;
+	SK_MEMCPY((char *) pBuf + sizeof(SK_I32), (char *) pBuf + HeaderLength, *pLen);
+	
+	switch(Mode) {
+	case SK_GET_SINGLE_VAR:
+		ReturnCode = SkPnmiGetVar(pAC, IoC, Oid, 
+				(char *) pBuf + sizeof(SK_I32), pLen,
+				((SK_U32) (-1)), NetIndex);
+		SK_PNMI_STORE_U32(pBuf, ReturnCode);
+		*pLen = *pLen + sizeof(SK_I32);
+		break;
+	case SK_PRESET_SINGLE_VAR:
+		ReturnCode = SkPnmiPreSetVar(pAC, IoC, Oid, 
+				(char *) pBuf + sizeof(SK_I32), pLen,
+				((SK_U32) (-1)), NetIndex);
+		SK_PNMI_STORE_U32(pBuf, ReturnCode);
+		*pLen = *pLen + sizeof(SK_I32);
+		break;
+	case SK_SET_SINGLE_VAR:
+		ReturnCode = SkPnmiSetVar(pAC, IoC, Oid, 
+				(char *) pBuf + sizeof(SK_I32), pLen,
+				((SK_U32) (-1)), NetIndex);
+		SK_PNMI_STORE_U32(pBuf, ReturnCode);
+		*pLen = *pLen + sizeof(SK_I32);
+		break;
+	case SK_GET_FULL_MIB:
+		ReturnCode = SkPnmiGetStruct(pAC, IoC, pBuf, pLen, NetIndex);
+		break;
+	case SK_PRESET_FULL_MIB:
+		ReturnCode = SkPnmiPreSetStruct(pAC, IoC, pBuf, pLen, NetIndex);
+		break;
+	case SK_SET_FULL_MIB:
+		ReturnCode = SkPnmiSetStruct(pAC, IoC, pBuf, pLen, NetIndex);
+		break;
+	default:
+		break;
+	}
+	
+	return (ReturnCode);
+
+} /* SkGeIocGen */
diff --git a/drivers/net/sk98lin/skgesirq.c b/drivers/net/sk98lin/skgesirq.c
new file mode 100644
index 0000000..3e7aa49
--- /dev/null
+++ b/drivers/net/sk98lin/skgesirq.c
@@ -0,0 +1,2229 @@
+/******************************************************************************
+ *
+ * Name:	skgesirq.c
+ * Project:	Gigabit Ethernet Adapters, Common Modules
+ * Version:	$Revision: 1.92 $
+ * Date:	$Date: 2003/09/16 14:37:07 $
+ * Purpose:	Special IRQ module
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *	(C)Copyright 1998-2002 SysKonnect.
+ *	(C)Copyright 2002-2003 Marvell.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/*
+ *	Special Interrupt handler
+ *
+ *	The following abstract should show how this module is included
+ *	in the driver path:
+ *
+ *	In the ISR of the driver the bits for frame transmission complete and
+ *	for receive complete are checked and handled by the driver itself.
+ *	The bits of the slow path mask are checked after that and then the
+ *	entry into the so-called "slow path" is prepared. It is an implementors
+ *	decision whether this is executed directly or just scheduled by
+ *	disabling the mask. In the interrupt service routine some events may be
+ *	generated, so it would be a good idea to call the EventDispatcher
+ *	right after this ISR.
+ *
+ *	The Interrupt source register of the adapter is NOT read by this module.
+ *  SO if the drivers implementor needs a while loop around the
+ *	slow data paths interrupt bits, he needs to call the SkGeSirqIsr() for
+ *	each loop entered.
+ *
+ *	However, the MAC Interrupt status registers are read in a while loop.
+ *
+ */
+
+#if (defined(DEBUG) || ((!defined(LINT)) && (!defined(SK_SLIM))))
+static const char SysKonnectFileId[] =
+	"@(#) $Id: skgesirq.c,v 1.92 2003/09/16 14:37:07 rschmidt Exp $ (C) Marvell.";
+#endif
+
+#include "h/skdrv1st.h"		/* Driver Specific Definitions */
+#ifndef SK_SLIM
+#include "h/skgepnmi.h"		/* PNMI Definitions */
+#include "h/skrlmt.h"		/* RLMT Definitions */
+#endif
+#include "h/skdrv2nd.h"		/* Adapter Control and Driver specific Def. */
+
+/* local function prototypes */
+#ifdef GENESIS
+static int	SkGePortCheckUpXmac(SK_AC*, SK_IOC, int, SK_BOOL);
+static int	SkGePortCheckUpBcom(SK_AC*, SK_IOC, int, SK_BOOL);
+static void	SkPhyIsrBcom(SK_AC*, SK_IOC, int, SK_U16);
+#endif /* GENESIS */
+#ifdef YUKON
+static int	SkGePortCheckUpGmac(SK_AC*, SK_IOC, int, SK_BOOL);
+static void	SkPhyIsrGmac(SK_AC*, SK_IOC, int, SK_U16);
+#endif /* YUKON */
+#ifdef OTHER_PHY
+static int	SkGePortCheckUpLone(SK_AC*, SK_IOC, int, SK_BOOL);
+static int	SkGePortCheckUpNat(SK_AC*, SK_IOC, int, SK_BOOL);
+static void	SkPhyIsrLone(SK_AC*, SK_IOC, int, SK_U16);
+#endif /* OTHER_PHY */
+
+#ifdef GENESIS
+/*
+ * array of Rx counter from XMAC which are checked
+ * in AutoSense mode to check whether a link is not able to auto-negotiate.
+ */
+static const SK_U16 SkGeRxRegs[]= {
+	XM_RXF_64B,
+	XM_RXF_127B,
+	XM_RXF_255B,
+	XM_RXF_511B,
+	XM_RXF_1023B,
+	XM_RXF_MAX_SZ
+} ;
+#endif /* GENESIS */
+
+#ifdef __C2MAN__
+/*
+ *	Special IRQ function
+ *
+ *	General Description:
+ *
+ */
+intro()
+{}
+#endif
+
+/******************************************************************************
+ *
+ *	SkHWInitDefSense() - Default Autosensing mode initialization
+ *
+ * Description: sets the PLinkMode for HWInit
+ *
+ * Returns: N/A
+ */
+static void SkHWInitDefSense(
+SK_AC	*pAC,	/* adapter context */
+SK_IOC	IoC,	/* IO context */
+int		Port)	/* Port Index (MAC_1 + n) */
+{
+	SK_GEPORT	*pPrt;		/* GIni Port struct pointer */
+
+	pPrt = &pAC->GIni.GP[Port];
+
+	pPrt->PAutoNegTimeOut = 0;
+
+	if (pPrt->PLinkModeConf != SK_LMODE_AUTOSENSE) {
+		pPrt->PLinkMode = pPrt->PLinkModeConf;
+		return;
+	}
+
+	SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
+		("AutoSensing: First mode %d on Port %d\n",
+		(int)SK_LMODE_AUTOFULL, Port));
+
+	pPrt->PLinkMode = (SK_U8)SK_LMODE_AUTOFULL;
+
+	return;
+}	/* SkHWInitDefSense */
+
+
+#ifdef GENESIS
+/******************************************************************************
+ *
+ *	SkHWSenseGetNext() - Get Next Autosensing Mode
+ *
+ * Description: gets the appropriate next mode
+ *
+ * Note:
+ *
+ */
+static SK_U8 SkHWSenseGetNext(
+SK_AC	*pAC,	/* adapter context */
+SK_IOC	IoC,	/* IO context */
+int		Port)	/* Port Index (MAC_1 + n) */
+{
+	SK_GEPORT	*pPrt;		/* GIni Port struct pointer */
+
+	pPrt = &pAC->GIni.GP[Port];
+
+	pPrt->PAutoNegTimeOut = 0;
+
+    if (pPrt->PLinkModeConf != (SK_U8)SK_LMODE_AUTOSENSE) {
+		/* Leave all as configured */
+		return(pPrt->PLinkModeConf);
+	}
+
+    if (pPrt->PLinkMode == (SK_U8)SK_LMODE_AUTOFULL) {
+		/* Return next mode AUTOBOTH */
+        return ((SK_U8)SK_LMODE_AUTOBOTH);
+	}
+
+	/* Return default autofull */
+    return ((SK_U8)SK_LMODE_AUTOFULL);
+}	/* SkHWSenseGetNext */
+
+
+/******************************************************************************
+ *
+ *	SkHWSenseSetNext() - Autosensing Set next mode
+ *
+ * Description:	sets the appropriate next mode
+ *
+ * Returns: N/A
+ */
+static void SkHWSenseSetNext(
+SK_AC	*pAC,		/* adapter context */
+SK_IOC	IoC,		/* IO context */
+int		Port,		/* Port Index (MAC_1 + n) */
+SK_U8	NewMode)	/* New Mode to be written in sense mode */
+{
+	SK_GEPORT	*pPrt;		/* GIni Port struct pointer */
+
+	pPrt = &pAC->GIni.GP[Port];
+
+	pPrt->PAutoNegTimeOut = 0;
+
+    if (pPrt->PLinkModeConf != (SK_U8)SK_LMODE_AUTOSENSE) {
+		return;
+	}
+
+	SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
+		("AutoSensing: next mode %d on Port %d\n",
+		(int)NewMode, Port));
+
+	pPrt->PLinkMode = NewMode;
+
+	return;
+}	/* SkHWSenseSetNext */
+#endif /* GENESIS */
+
+
+/******************************************************************************
+ *
+ *	SkHWLinkDown() - Link Down handling
+ *
+ * Description: handles the hardware link down signal
+ *
+ * Returns: N/A
+ */
+void SkHWLinkDown(
+SK_AC	*pAC,		/* adapter context */
+SK_IOC	IoC,		/* IO context */
+int		Port)		/* Port Index (MAC_1 + n) */
+{
+	SK_GEPORT	*pPrt;		/* GIni Port struct pointer */
+
+	pPrt = &pAC->GIni.GP[Port];
+
+	/* Disable all MAC interrupts */
+	SkMacIrqDisable(pAC, IoC, Port);
+
+	/* Disable Receiver and Transmitter */
+	SkMacRxTxDisable(pAC, IoC, Port);
+	
+	/* Init default sense mode */
+	SkHWInitDefSense(pAC, IoC, Port);
+
+	if (pPrt->PHWLinkUp == SK_FALSE) {
+		return;
+	}
+
+	SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
+		("Link down Port %d\n", Port));
+
+	/* Set Link to DOWN */
+	pPrt->PHWLinkUp = SK_FALSE;
+
+	/* Reset Port stati */
+    pPrt->PLinkModeStatus = (SK_U8)SK_LMODE_STAT_UNKNOWN;
+    pPrt->PFlowCtrlStatus = (SK_U8)SK_FLOW_STAT_NONE;
+	pPrt->PLinkSpeedUsed = (SK_U8)SK_LSPEED_STAT_INDETERMINATED;
+
+	/* Re-init Phy especially when the AutoSense default is set now */
+	SkMacInitPhy(pAC, IoC, Port, SK_FALSE);
+
+	/* GP0: used for workaround of Rev. C Errata 2 */
+
+	/* Do NOT signal to RLMT */
+
+	/* Do NOT start the timer here */
+}	/* SkHWLinkDown */
+
+
+/******************************************************************************
+ *
+ *	SkHWLinkUp() - Link Up handling
+ *
+ * Description: handles the hardware link up signal
+ *
+ * Returns: N/A
+ */
+static void SkHWLinkUp(
+SK_AC	*pAC,	/* adapter context */
+SK_IOC	IoC,	/* IO context */
+int		Port)	/* Port Index (MAC_1 + n) */
+{
+	SK_GEPORT	*pPrt;		/* GIni Port struct pointer */
+
+	pPrt = &pAC->GIni.GP[Port];
+
+	if (pPrt->PHWLinkUp) {
+		/* We do NOT need to proceed on active link */
+		return;
+	}
+
+	pPrt->PHWLinkUp = SK_TRUE;
+	pPrt->PAutoNegFail = SK_FALSE;
+    pPrt->PLinkModeStatus = (SK_U8)SK_LMODE_STAT_UNKNOWN;
+
+    if (pPrt->PLinkMode != (SK_U8)SK_LMODE_AUTOHALF &&
+        pPrt->PLinkMode != (SK_U8)SK_LMODE_AUTOFULL &&
+        pPrt->PLinkMode != (SK_U8)SK_LMODE_AUTOBOTH) {
+		/* Link is up and no Auto-negotiation should be done */
+
+		/* Link speed should be the configured one */
+		switch (pPrt->PLinkSpeed) {
+		case SK_LSPEED_AUTO:
+			/* default is 1000 Mbps */
+		case SK_LSPEED_1000MBPS:
+			pPrt->PLinkSpeedUsed = (SK_U8)SK_LSPEED_STAT_1000MBPS;
+			break;
+		case SK_LSPEED_100MBPS:
+			pPrt->PLinkSpeedUsed = (SK_U8)SK_LSPEED_STAT_100MBPS;
+			break;
+		case SK_LSPEED_10MBPS:
+			pPrt->PLinkSpeedUsed = (SK_U8)SK_LSPEED_STAT_10MBPS;
+			break;
+		}
+
+		/* Set Link Mode Status */
+		if (pPrt->PLinkMode == SK_LMODE_FULL) {
+			pPrt->PLinkModeStatus = (SK_U8)SK_LMODE_STAT_FULL;
+		}
+		else {
+            pPrt->PLinkModeStatus = (SK_U8)SK_LMODE_STAT_HALF;
+		}
+
+		/* No flow control without auto-negotiation */
+        pPrt->PFlowCtrlStatus = (SK_U8)SK_FLOW_STAT_NONE;
+
+		/* enable Rx/Tx */
+        (void)SkMacRxTxEnable(pAC, IoC, Port);
+	}
+}	/* SkHWLinkUp */
+
+
+/******************************************************************************
+ *
+ *	SkMacParity() - MAC parity workaround
+ *
+ * Description: handles MAC parity errors correctly
+ *
+ * Returns: N/A
+ */
+static void SkMacParity(
+SK_AC	*pAC,	/* adapter context */
+SK_IOC	IoC,	/* IO context */
+int		Port)	/* Port Index of the port failed */
+{
+	SK_EVPARA	Para;
+	SK_GEPORT	*pPrt;		/* GIni Port struct pointer */
+	SK_U32		TxMax;		/* Tx Max Size Counter */
+
+	pPrt = &pAC->GIni.GP[Port];
+
+	/* Clear IRQ Tx Parity Error */
+#ifdef GENESIS
+	if (pAC->GIni.GIGenesis) {
+
+		SK_OUT16(IoC, MR_ADDR(Port, TX_MFF_CTRL1), MFF_CLR_PERR);
+	}
+#endif /* GENESIS */
+	
+#ifdef YUKON
+	if (pAC->GIni.GIYukon) {
+		/* HW-Bug #8: cleared by GMF_CLI_TX_FC instead of GMF_CLI_TX_PE */
+		SK_OUT8(IoC, MR_ADDR(Port, TX_GMF_CTRL_T),
+			(SK_U8)((pAC->GIni.GIChipId == CHIP_ID_YUKON &&
+			pAC->GIni.GIChipRev == 0) ? GMF_CLI_TX_FC : GMF_CLI_TX_PE));
+	}
+#endif /* YUKON */
+	
+	if (pPrt->PCheckPar) {
+
+		if (Port == MAC_1) {
+			SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E016, SKERR_SIRQ_E016MSG);
+		}
+		else {
+			SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E017, SKERR_SIRQ_E017MSG);
+		}
+		Para.Para64 = Port;
+		SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para);
+		
+		Para.Para32[0] = Port;
+		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para);
+
+		return;
+	}
+
+	/* Check whether frames with a size of 1k were sent */
+#ifdef GENESIS
+	if (pAC->GIni.GIGenesis) {
+		/* Snap statistic counters */
+		(void)SkXmUpdateStats(pAC, IoC, Port);
+		
+		(void)SkXmMacStatistic(pAC, IoC, Port, XM_TXF_MAX_SZ, &TxMax);
+	}
+#endif /* GENESIS */
+	
+#ifdef YUKON
+	if (pAC->GIni.GIYukon) {
+
+		(void)SkGmMacStatistic(pAC, IoC, Port, GM_TXF_1518B, &TxMax);
+	}
+#endif /* YUKON */
+	
+	if (TxMax > 0) {
+		/* From now on check the parity */
+		pPrt->PCheckPar = SK_TRUE;
+	}
+}	/* SkMacParity */
+
+
+/******************************************************************************
+ *
+ *	SkGeHwErr() - Hardware Error service routine
+ *
+ * Description: handles all HW Error interrupts
+ *
+ * Returns: N/A
+ */
+static void SkGeHwErr(
+SK_AC	*pAC,		/* adapter context */
+SK_IOC	IoC,		/* IO context */
+SK_U32	HwStatus)	/* Interrupt status word */
+{
+	SK_EVPARA	Para;
+	SK_U16		Word;
+
+	if ((HwStatus & (IS_IRQ_MST_ERR | IS_IRQ_STAT)) != 0) {
+		/* PCI Errors occured */
+		if ((HwStatus & IS_IRQ_STAT) != 0) {
+			SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E013, SKERR_SIRQ_E013MSG);
+		}
+		else {
+			SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E012, SKERR_SIRQ_E012MSG);
+		}
+
+		/* Reset all bits in the PCI STATUS register */
+		SK_IN16(IoC, PCI_C(PCI_STATUS), &Word);
+		
+		SK_OUT8(IoC, B2_TST_CTRL1, TST_CFG_WRITE_ON);
+        SK_OUT16(IoC, PCI_C(PCI_STATUS), (SK_U16)(Word | PCI_ERRBITS));
+		SK_OUT8(IoC, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
+
+		Para.Para64 = 0;
+		SkEventQueue(pAC, SKGE_DRV, SK_DRV_ADAP_FAIL, Para);
+	}
+
+#ifdef GENESIS
+	if (pAC->GIni.GIGenesis) {
+
+		if ((HwStatus & IS_NO_STAT_M1) != 0) {
+			/* Ignore it */
+			/* This situation is also indicated in the descriptor */
+			SK_OUT16(IoC, MR_ADDR(MAC_1, RX_MFF_CTRL1), MFF_CLR_INSTAT);
+		}
+
+		if ((HwStatus & IS_NO_STAT_M2) != 0) {
+			/* Ignore it */
+			/* This situation is also indicated in the descriptor */
+			SK_OUT16(IoC, MR_ADDR(MAC_2, RX_MFF_CTRL1), MFF_CLR_INSTAT);
+		}
+
+		if ((HwStatus & IS_NO_TIST_M1) != 0) {
+			/* Ignore it */
+			/* This situation is also indicated in the descriptor */
+			SK_OUT16(IoC, MR_ADDR(MAC_1, RX_MFF_CTRL1), MFF_CLR_INTIST);
+		}
+
+		if ((HwStatus & IS_NO_TIST_M2) != 0) {
+			/* Ignore it */
+			/* This situation is also indicated in the descriptor */
+			SK_OUT16(IoC, MR_ADDR(MAC_2, RX_MFF_CTRL1), MFF_CLR_INTIST);
+		}
+	}
+#endif /* GENESIS */
+	
+#ifdef YUKON
+	if (pAC->GIni.GIYukon) {
+		/* This is necessary only for Rx timing measurements */
+		if ((HwStatus & IS_IRQ_TIST_OV) != 0) {
+			/* increment Time Stamp Timer counter (high) */
+			pAC->GIni.GITimeStampCnt++;
+
+			/* Clear Time Stamp Timer IRQ */
+			SK_OUT8(IoC, GMAC_TI_ST_CTRL, (SK_U8)GMT_ST_CLR_IRQ);
+		}
+
+		if ((HwStatus & IS_IRQ_SENSOR) != 0) {
+			/* no sensors on 32-bit Yukon */
+			if (pAC->GIni.GIYukon32Bit) {
+				/* disable HW Error IRQ */
+				pAC->GIni.GIValIrqMask &= ~IS_HW_ERR;
+			}
+		}
+	}
+#endif /* YUKON */
+
+	if ((HwStatus & IS_RAM_RD_PAR) != 0) {
+		SK_OUT16(IoC, B3_RI_CTRL, RI_CLR_RD_PERR);
+		SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E014, SKERR_SIRQ_E014MSG);
+		Para.Para64 = 0;
+		SkEventQueue(pAC, SKGE_DRV, SK_DRV_ADAP_FAIL, Para);
+	}
+
+	if ((HwStatus & IS_RAM_WR_PAR) != 0) {
+		SK_OUT16(IoC, B3_RI_CTRL, RI_CLR_WR_PERR);
+		SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E015, SKERR_SIRQ_E015MSG);
+		Para.Para64 = 0;
+		SkEventQueue(pAC, SKGE_DRV, SK_DRV_ADAP_FAIL, Para);
+	}
+
+	if ((HwStatus & IS_M1_PAR_ERR) != 0) {
+		SkMacParity(pAC, IoC, MAC_1);
+	}
+
+	if ((HwStatus & IS_M2_PAR_ERR) != 0) {
+		SkMacParity(pAC, IoC, MAC_2);
+	}
+
+	if ((HwStatus & IS_R1_PAR_ERR) != 0) {
+		/* Clear IRQ */
+		SK_OUT32(IoC, B0_R1_CSR, CSR_IRQ_CL_P);
+
+		SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E018, SKERR_SIRQ_E018MSG);
+		Para.Para64 = MAC_1;
+		SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para);
+		
+		Para.Para32[0] = MAC_1;
+		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para);
+	}
+
+	if ((HwStatus & IS_R2_PAR_ERR) != 0) {
+		/* Clear IRQ */
+		SK_OUT32(IoC, B0_R2_CSR, CSR_IRQ_CL_P);
+
+		SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E019, SKERR_SIRQ_E019MSG);
+		Para.Para64 = MAC_2;
+		SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para);
+		
+		Para.Para32[0] = MAC_2;
+		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para);
+	}
+}	/* SkGeHwErr */
+
+
+/******************************************************************************
+ *
+ *	SkGeSirqIsr() - Special Interrupt Service Routine
+ *
+ * Description: handles all non data transfer specific interrupts (slow path)
+ *
+ * Returns: N/A
+ */
+void SkGeSirqIsr(
+SK_AC	*pAC,		/* adapter context */
+SK_IOC	IoC,		/* IO context */
+SK_U32	Istatus)	/* Interrupt status word */
+{
+	SK_EVPARA	Para;
+	SK_U32		RegVal32;	/* Read register value */
+	SK_GEPORT	*pPrt;		/* GIni Port struct pointer */
+	SK_U16 		PhyInt;
+	int			i;
+
+	if (((Istatus & IS_HW_ERR) & pAC->GIni.GIValIrqMask) != 0) {
+		/* read the HW Error Interrupt source */
+		SK_IN32(IoC, B0_HWE_ISRC, &RegVal32);
+		
+		SkGeHwErr(pAC, IoC, RegVal32);
+	}
+
+	/*
+	 * Packet Timeout interrupts
+	 */
+	/* Check whether MACs are correctly initialized */
+	if (((Istatus & (IS_PA_TO_RX1 | IS_PA_TO_TX1)) != 0) &&
+		pAC->GIni.GP[MAC_1].PState == SK_PRT_RESET) {
+		/* MAC 1 was not initialized but Packet timeout occured */
+		SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_SIRQ_E004,
+			SKERR_SIRQ_E004MSG);
+	}
+
+	if (((Istatus & (IS_PA_TO_RX2 | IS_PA_TO_TX2)) != 0) &&
+	    pAC->GIni.GP[MAC_2].PState == SK_PRT_RESET) {
+		/* MAC 2 was not initialized but Packet timeout occured */
+		SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_SIRQ_E005,
+			SKERR_SIRQ_E005MSG);
+	}
+
+	if ((Istatus & IS_PA_TO_RX1) != 0) {
+		/* Means network is filling us up */
+		SK_ERR_LOG(pAC, SK_ERRCL_HW | SK_ERRCL_INIT, SKERR_SIRQ_E002,
+			SKERR_SIRQ_E002MSG);
+		SK_OUT16(IoC, B3_PA_CTRL, PA_CLR_TO_RX1);
+	}
+
+	if ((Istatus & IS_PA_TO_RX2) != 0) {
+		/* Means network is filling us up */
+		SK_ERR_LOG(pAC, SK_ERRCL_HW | SK_ERRCL_INIT, SKERR_SIRQ_E003,
+			SKERR_SIRQ_E003MSG);
+		SK_OUT16(IoC, B3_PA_CTRL, PA_CLR_TO_RX2);
+	}
+
+	if ((Istatus & IS_PA_TO_TX1) != 0) {
+		
+		pPrt = &pAC->GIni.GP[0];
+
+		/* May be a normal situation in a server with a slow network */
+		SK_OUT16(IoC, B3_PA_CTRL, PA_CLR_TO_TX1);
+
+#ifdef GENESIS
+		if (pAC->GIni.GIGenesis) {
+			/*
+			 * workaround: if in half duplex mode, check for Tx hangup.
+			 * Read number of TX'ed bytes, wait for 10 ms, then compare
+			 * the number with current value. If nothing changed, we assume
+			 * that Tx is hanging and do a FIFO flush (see event routine).
+			 */
+			if ((pPrt->PLinkModeStatus == SK_LMODE_STAT_HALF ||
+				pPrt->PLinkModeStatus == SK_LMODE_STAT_AUTOHALF) &&
+				!pPrt->HalfDupTimerActive) {
+				/*
+				 * many more pack. arb. timeouts may come in between,
+				 * we ignore those
+				 */
+				pPrt->HalfDupTimerActive = SK_TRUE;
+				/* Snap statistic counters */
+				(void)SkXmUpdateStats(pAC, IoC, 0);
+
+				(void)SkXmMacStatistic(pAC, IoC, 0, XM_TXO_OK_HI, &RegVal32);
+
+				pPrt->LastOctets = (SK_U64)RegVal32 << 32;
+				
+				(void)SkXmMacStatistic(pAC, IoC, 0, XM_TXO_OK_LO, &RegVal32);
+
+				pPrt->LastOctets += RegVal32;
+				
+				Para.Para32[0] = 0;
+				SkTimerStart(pAC, IoC, &pPrt->HalfDupChkTimer, SK_HALFDUP_CHK_TIME,
+					SKGE_HWAC, SK_HWEV_HALFDUP_CHK, Para);
+			}
+		}
+#endif /* GENESIS */
+	}
+
+	if ((Istatus & IS_PA_TO_TX2) != 0) {
+		
+		pPrt = &pAC->GIni.GP[1];
+
+		/* May be a normal situation in a server with a slow network */
+		SK_OUT16(IoC, B3_PA_CTRL, PA_CLR_TO_TX2);
+
+#ifdef GENESIS
+		if (pAC->GIni.GIGenesis) {
+			/* workaround: see above */
+			if ((pPrt->PLinkModeStatus == SK_LMODE_STAT_HALF ||
+				 pPrt->PLinkModeStatus == SK_LMODE_STAT_AUTOHALF) &&
+				!pPrt->HalfDupTimerActive) {
+				pPrt->HalfDupTimerActive = SK_TRUE;
+				/* Snap statistic counters */
+				(void)SkXmUpdateStats(pAC, IoC, 1);
+
+				(void)SkXmMacStatistic(pAC, IoC, 1, XM_TXO_OK_HI, &RegVal32);
+
+				pPrt->LastOctets = (SK_U64)RegVal32 << 32;
+				
+				(void)SkXmMacStatistic(pAC, IoC, 1, XM_TXO_OK_LO, &RegVal32);
+
+				pPrt->LastOctets += RegVal32;
+				
+				Para.Para32[0] = 1;
+				SkTimerStart(pAC, IoC, &pPrt->HalfDupChkTimer, SK_HALFDUP_CHK_TIME,
+					SKGE_HWAC, SK_HWEV_HALFDUP_CHK, Para);
+			}
+		}
+#endif /* GENESIS */
+	}
+
+	/* Check interrupts of the particular queues */
+	if ((Istatus & IS_R1_C) != 0) {
+		/* Clear IRQ */
+		SK_OUT32(IoC, B0_R1_CSR, CSR_IRQ_CL_C);
+		SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_SIRQ_E006,
+			SKERR_SIRQ_E006MSG);
+		Para.Para64 = MAC_1;
+		SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para);
+		Para.Para32[0] = MAC_1;
+		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para);
+	}
+
+	if ((Istatus & IS_R2_C) != 0) {
+		/* Clear IRQ */
+		SK_OUT32(IoC, B0_R2_CSR, CSR_IRQ_CL_C);
+		SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_SIRQ_E007,
+			SKERR_SIRQ_E007MSG);
+		Para.Para64 = MAC_2;
+		SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para);
+		Para.Para32[0] = MAC_2;
+		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para);
+	}
+
+	if ((Istatus & IS_XS1_C) != 0) {
+		/* Clear IRQ */
+		SK_OUT32(IoC, B0_XS1_CSR, CSR_IRQ_CL_C);
+		SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_SIRQ_E008,
+			SKERR_SIRQ_E008MSG);
+		Para.Para64 = MAC_1;
+		SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para);
+		Para.Para32[0] = MAC_1;
+		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para);
+	}
+
+	if ((Istatus & IS_XA1_C) != 0) {
+		/* Clear IRQ */
+		SK_OUT32(IoC, B0_XA1_CSR, CSR_IRQ_CL_C);
+		SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_SIRQ_E009,
+			SKERR_SIRQ_E009MSG);
+		Para.Para64 = MAC_1;
+		SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para);
+		Para.Para32[0] = MAC_1;
+		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para);
+	}
+
+	if ((Istatus & IS_XS2_C) != 0) {
+		/* Clear IRQ */
+		SK_OUT32(IoC, B0_XS2_CSR, CSR_IRQ_CL_C);
+		SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_SIRQ_E010,
+			SKERR_SIRQ_E010MSG);
+		Para.Para64 = MAC_2;
+		SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para);
+		Para.Para32[0] = MAC_2;
+		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para);
+	}
+
+	if ((Istatus & IS_XA2_C) != 0) {
+		/* Clear IRQ */
+		SK_OUT32(IoC, B0_XA2_CSR, CSR_IRQ_CL_C);
+		SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_SIRQ_E011,
+			SKERR_SIRQ_E011MSG);
+		Para.Para64 = MAC_2;
+		SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para);
+		Para.Para32[0] = MAC_2;
+		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para);
+	}
+
+	/* External reg interrupt */
+	if ((Istatus & IS_EXT_REG) != 0) {
+		/* Test IRQs from PHY */
+		for (i = 0; i < pAC->GIni.GIMacsFound; i++) {
+			
+			pPrt = &pAC->GIni.GP[i];
+			
+			if (pPrt->PState == SK_PRT_RESET) {
+				continue;
+			}
+			
+#ifdef GENESIS
+			if (pAC->GIni.GIGenesis) {
+				
+				switch (pPrt->PhyType) {
+				
+				case SK_PHY_XMAC:
+					break;
+				
+				case SK_PHY_BCOM:
+					SkXmPhyRead(pAC, IoC, i, PHY_BCOM_INT_STAT, &PhyInt);
+	
+					if ((PhyInt & ~PHY_B_DEF_MSK) != 0) {
+						SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
+							("Port %d Bcom Int: 0x%04X\n",
+							i, PhyInt));
+						SkPhyIsrBcom(pAC, IoC, i, PhyInt);
+					}
+					break;
+#ifdef OTHER_PHY
+				case SK_PHY_LONE:
+					SkXmPhyRead(pAC, IoC, i, PHY_LONE_INT_STAT, &PhyInt);
+					
+					if ((PhyInt & PHY_L_DEF_MSK) != 0) {
+						SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
+							("Port %d Lone Int: %x\n",
+							i, PhyInt));
+						SkPhyIsrLone(pAC, IoC, i, PhyInt);
+					}
+					break;
+#endif /* OTHER_PHY */
+				}
+			}
+#endif /* GENESIS */
+	
+#ifdef YUKON
+			if (pAC->GIni.GIYukon) {
+				/* Read PHY Interrupt Status */
+				SkGmPhyRead(pAC, IoC, i, PHY_MARV_INT_STAT, &PhyInt);
+
+				if ((PhyInt & PHY_M_DEF_MSK) != 0) {
+					SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
+						("Port %d Marv Int: 0x%04X\n",
+						i, PhyInt));
+					SkPhyIsrGmac(pAC, IoC, i, PhyInt);
+				}
+			}
+#endif /* YUKON */
+		}
+	}
+
+	/* I2C Ready interrupt */
+	if ((Istatus & IS_I2C_READY) != 0) {
+#ifdef SK_SLIM
+        SK_OUT32(IoC, B2_I2C_IRQ, I2C_CLR_IRQ);
+#else		
+		SkI2cIsr(pAC, IoC);
+#endif		
+	}
+
+	/* SW forced interrupt */
+	if ((Istatus & IS_IRQ_SW) != 0) {
+		/* clear the software IRQ */
+		SK_OUT8(IoC, B0_CTST, CS_CL_SW_IRQ);
+	}
+
+	if ((Istatus & IS_LNK_SYNC_M1) != 0) {
+		/*
+		 * We do NOT need the Link Sync interrupt, because it shows
+		 * us only a link going down.
+		 */
+		/* clear interrupt */
+		SK_OUT8(IoC, MR_ADDR(MAC_1, LNK_SYNC_CTRL), LED_CLR_IRQ);
+	}
+
+	/* Check MAC after link sync counter */
+	if ((Istatus & IS_MAC1) != 0) {
+		/* IRQ from MAC 1 */
+		SkMacIrq(pAC, IoC, MAC_1);
+	}
+
+	if ((Istatus & IS_LNK_SYNC_M2) != 0) {
+		/*
+		 * We do NOT need the Link Sync interrupt, because it shows
+		 * us only a link going down.
+		 */
+		/* clear interrupt */
+		SK_OUT8(IoC, MR_ADDR(MAC_2, LNK_SYNC_CTRL), LED_CLR_IRQ);
+	}
+
+	/* Check MAC after link sync counter */
+	if ((Istatus & IS_MAC2) != 0) {
+		/* IRQ from MAC 2 */
+		SkMacIrq(pAC, IoC, MAC_2);
+	}
+
+	/* Timer interrupt (served last) */
+	if ((Istatus & IS_TIMINT) != 0) {
+		/* check for HW Errors */
+		if (((Istatus & IS_HW_ERR) & ~pAC->GIni.GIValIrqMask) != 0) {
+			/* read the HW Error Interrupt source */
+			SK_IN32(IoC, B0_HWE_ISRC, &RegVal32);
+
+			SkGeHwErr(pAC, IoC, RegVal32);
+		}
+
+		SkHwtIsr(pAC, IoC);
+	}
+
+}	/* SkGeSirqIsr */
+
+
+#ifdef GENESIS
+/******************************************************************************
+ *
+ * SkGePortCheckShorts() - Implementing XMAC Workaround Errata # 2
+ *
+ * return:
+ *	0	o.k. nothing needed
+ *	1	Restart needed on this port
+ */
+static int SkGePortCheckShorts(
+SK_AC	*pAC,		/* Adapter Context */
+SK_IOC	IoC,		/* IO Context */
+int		Port)		/* Which port should be checked */
+{
+	SK_U32		Shorts;			/* Short Event Counter */
+	SK_U32		CheckShorts;	/* Check value for Short Event Counter */
+	SK_U64		RxCts;			/* Rx Counter (packets on network) */
+	SK_U32		RxTmp;			/* Rx temp. Counter */
+	SK_U32		FcsErrCts;		/* FCS Error Counter */
+	SK_GEPORT	*pPrt;			/* GIni Port struct pointer */
+	int			Rtv;			/* Return value */
+	int			i;
+
+	pPrt = &pAC->GIni.GP[Port];
+
+	/* Default: no action */
+	Rtv = SK_HW_PS_NONE;
+
+	(void)SkXmUpdateStats(pAC, IoC, Port);
+
+	/* Extra precaution: check for short Event counter */
+	(void)SkXmMacStatistic(pAC, IoC, Port, XM_RXE_SHT_ERR, &Shorts);
+
+	/*
+	 * Read Rx counters (packets seen on the network and not necessarily
+	 * really received.
+	 */
+	RxCts = 0;
+
+	for (i = 0; i < sizeof(SkGeRxRegs)/sizeof(SkGeRxRegs[0]); i++) {
+		
+		(void)SkXmMacStatistic(pAC, IoC, Port, SkGeRxRegs[i], &RxTmp);
+		
+		RxCts += (SK_U64)RxTmp;
+	}
+
+	/* On default: check shorts against zero */
+	CheckShorts = 0;
+
+	/* Extra precaution on active links */
+	if (pPrt->PHWLinkUp) {
+		/* Reset Link Restart counter */
+		pPrt->PLinkResCt = 0;
+		pPrt->PAutoNegTOCt = 0;
+
+		/* If link is up check for 2 */
+		CheckShorts = 2;
+
+		(void)SkXmMacStatistic(pAC, IoC, Port, XM_RXF_FCS_ERR, &FcsErrCts);
+		
+		if (pPrt->PLinkModeConf == SK_LMODE_AUTOSENSE &&
+		    pPrt->PLipaAutoNeg == SK_LIPA_UNKNOWN &&
+		    (pPrt->PLinkMode == SK_LMODE_HALF ||
+			 pPrt->PLinkMode == SK_LMODE_FULL)) {
+			/*
+			 * This is autosensing and we are in the fallback
+			 * manual full/half duplex mode.
+			 */
+			if (RxCts == pPrt->PPrevRx) {
+				/* Nothing received, restart link */
+				pPrt->PPrevFcs = FcsErrCts;
+				pPrt->PPrevShorts = Shorts;
+				
+				return(SK_HW_PS_RESTART);
+			}
+			else {
+				pPrt->PLipaAutoNeg = SK_LIPA_MANUAL;
+			}
+		}
+
+		if (((RxCts - pPrt->PPrevRx) > pPrt->PRxLim) ||
+		    (!(FcsErrCts - pPrt->PPrevFcs))) {
+			/*
+			 * Note: The compare with zero above has to be done the way shown,
+			 * otherwise the Linux driver will have a problem.
+			 */
+			/*
+			 * We received a bunch of frames or no CRC error occured on the
+			 * network -> ok.
+			 */
+			pPrt->PPrevRx = RxCts;
+			pPrt->PPrevFcs = FcsErrCts;
+			pPrt->PPrevShorts = Shorts;
+
+			return(SK_HW_PS_NONE);
+		}
+
+		pPrt->PPrevFcs = FcsErrCts;
+	}
+
+
+	if ((Shorts - pPrt->PPrevShorts) > CheckShorts) {
+		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
+			("Short Event Count Restart Port %d \n", Port));
+		Rtv = SK_HW_PS_RESTART;
+	}
+
+	pPrt->PPrevShorts = Shorts;
+	pPrt->PPrevRx = RxCts;
+
+	return(Rtv);
+}	/* SkGePortCheckShorts */
+#endif /* GENESIS */
+
+
+/******************************************************************************
+ *
+ * SkGePortCheckUp() - Check if the link is up
+ *
+ * return:
+ *	0	o.k. nothing needed
+ *	1	Restart needed on this port
+ *	2	Link came up
+ */
+static int SkGePortCheckUp(
+SK_AC	*pAC,		/* Adapter Context */
+SK_IOC	IoC,		/* IO Context */
+int		Port)		/* Which port should be checked */
+{
+	SK_GEPORT	*pPrt;		/* GIni Port struct pointer */
+	SK_BOOL		AutoNeg;	/* Is Auto-negotiation used ? */
+	int			Rtv;		/* Return value */
+
+	Rtv = SK_HW_PS_NONE;
+	
+	pPrt = &pAC->GIni.GP[Port];
+
+	if (pPrt->PLinkMode == SK_LMODE_HALF || pPrt->PLinkMode == SK_LMODE_FULL) {
+		AutoNeg = SK_FALSE;
+	}
+	else {
+		AutoNeg = SK_TRUE;
+	}
+
+#ifdef GENESIS
+	if (pAC->GIni.GIGenesis) {
+
+		switch (pPrt->PhyType) {
+		
+		case SK_PHY_XMAC:
+			Rtv = SkGePortCheckUpXmac(pAC, IoC, Port, AutoNeg);
+			break;
+		case SK_PHY_BCOM:
+			Rtv = SkGePortCheckUpBcom(pAC, IoC, Port, AutoNeg);
+			break;
+#ifdef OTHER_PHY
+		case SK_PHY_LONE:
+			Rtv = SkGePortCheckUpLone(pAC, IoC, Port, AutoNeg);
+			break;
+		case SK_PHY_NAT:
+			Rtv = SkGePortCheckUpNat(pAC, IoC, Port, AutoNeg);
+			break;
+#endif /* OTHER_PHY */
+		}
+	}
+#endif /* GENESIS */
+	
+#ifdef YUKON
+	if (pAC->GIni.GIYukon) {
+		
+		Rtv = SkGePortCheckUpGmac(pAC, IoC, Port, AutoNeg);
+	}
+#endif /* YUKON */
+
+	return(Rtv);	
+}	/* SkGePortCheckUp */
+
+
+#ifdef GENESIS
+/******************************************************************************
+ *
+ * SkGePortCheckUpXmac() - Implementing of the Workaround Errata # 2
+ *
+ * return:
+ *	0	o.k. nothing needed
+ *	1	Restart needed on this port
+ *	2	Link came up
+ */
+static int SkGePortCheckUpXmac(
+SK_AC	*pAC,		/* Adapter Context */
+SK_IOC	IoC,		/* IO Context */
+int		Port,		/* Which port should be checked */
+SK_BOOL	AutoNeg)	/* Is Auto-negotiation used ? */
+{
+	SK_U32		Shorts;		/* Short Event Counter */
+	SK_GEPORT	*pPrt;		/* GIni Port struct pointer */
+	int			Done;
+	SK_U32		GpReg;		/* General Purpose register value */
+	SK_U16		Isrc;		/* Interrupt source register */
+	SK_U16		IsrcSum;	/* Interrupt source register sum */
+	SK_U16		LpAb;		/* Link Partner Ability */
+	SK_U16		ResAb;		/* Resolved Ability */
+	SK_U16		ExtStat;	/* Extended Status Register */
+	SK_U8		NextMode;	/* Next AutoSensing Mode */
+
+	pPrt = &pAC->GIni.GP[Port];
+
+	if (pPrt->PHWLinkUp) {
+		if (pPrt->PhyType != SK_PHY_XMAC) {
+			return(SK_HW_PS_NONE);
+		}
+		else {
+			return(SkGePortCheckShorts(pAC, IoC, Port));
+		}
+	}
+
+	IsrcSum = pPrt->PIsave;
+	pPrt->PIsave = 0;
+
+	/* Now wait for each port's link */
+	if (pPrt->PLinkBroken) {
+		/* Link was broken */
+		XM_IN32(IoC, Port, XM_GP_PORT, &GpReg);
+
+		if ((GpReg & XM_GP_INP_ASS) == 0) {
+			/* The Link is in sync */
+			XM_IN16(IoC, Port, XM_ISRC, &Isrc);
+			IsrcSum |= Isrc;
+			SkXmAutoNegLipaXmac(pAC, IoC, Port, IsrcSum);
+			
+			if ((Isrc & XM_IS_INP_ASS) == 0) {
+				/* It has been in sync since last time */
+				/* Restart the PORT */
+				SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
+					("Link in sync Restart Port %d\n", Port));
+
+				(void)SkXmUpdateStats(pAC, IoC, Port);
+
+				/* We now need to reinitialize the PrevShorts counter */
+				(void)SkXmMacStatistic(pAC, IoC, Port, XM_RXE_SHT_ERR, &Shorts);
+				pPrt->PPrevShorts = Shorts;
+
+				pPrt->PLinkBroken = SK_FALSE;
+
+				/*
+				 * Link Restart Workaround:
+				 *  it may be possible that the other Link side
+				 *  restarts its link as well an we detect
+				 *  another LinkBroken. To prevent this
+				 *  happening we check for a maximum number
+				 *  of consecutive restart. If those happens,
+				 *  we do NOT restart the active link and
+				 *  check whether the link is now o.k.
+				 */
+				pPrt->PLinkResCt++;
+				
+				pPrt->PAutoNegTimeOut = 0;
+
+				if (pPrt->PLinkResCt < SK_MAX_LRESTART) {
+					return(SK_HW_PS_RESTART);
+				}
+
+				pPrt->PLinkResCt = 0;
+				
+				SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+					("Do NOT restart on Port %d %x %x\n", Port, Isrc, IsrcSum));
+			}
+			else {
+				pPrt->PIsave = (SK_U16)(IsrcSum & XM_IS_AND);
+				
+				SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+					("Save Sync/nosync Port %d %x %x\n", Port, Isrc, IsrcSum));
+
+				/* Do nothing more if link is broken */
+				return(SK_HW_PS_NONE);
+			}
+		}
+		else {
+			/* Do nothing more if link is broken */
+			return(SK_HW_PS_NONE);
+		}
+
+	}
+	else {
+		/* Link was not broken, check if it is */
+		XM_IN16(IoC, Port, XM_ISRC, &Isrc);
+		IsrcSum |= Isrc;
+		if ((Isrc & XM_IS_INP_ASS) != 0) {
+			XM_IN16(IoC, Port, XM_ISRC, &Isrc);
+			IsrcSum |= Isrc;
+			if ((Isrc & XM_IS_INP_ASS) != 0) {
+				XM_IN16(IoC, Port, XM_ISRC, &Isrc);
+				IsrcSum |= Isrc;
+				if ((Isrc & XM_IS_INP_ASS) != 0) {
+					pPrt->PLinkBroken = SK_TRUE;
+					/* Re-Init Link partner Autoneg flag */
+					pPrt->PLipaAutoNeg = SK_LIPA_UNKNOWN;
+					SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
+						("Link broken Port %d\n", Port));
+
+					/* Cable removed-> reinit sense mode */
+					SkHWInitDefSense(pAC, IoC, Port);
+
+					return(SK_HW_PS_RESTART);
+				}
+			}
+		}
+		else {
+			SkXmAutoNegLipaXmac(pAC, IoC, Port, Isrc);
+			
+			if (SkGePortCheckShorts(pAC, IoC, Port) == SK_HW_PS_RESTART) {
+				return(SK_HW_PS_RESTART);
+			}
+		}
+	}
+
+	/*
+	 * here we usually can check whether the link is in sync and
+	 * auto-negotiation is done.
+	 */
+	XM_IN32(IoC, Port, XM_GP_PORT, &GpReg);
+	XM_IN16(IoC, Port, XM_ISRC, &Isrc);
+	IsrcSum |= Isrc;
+
+	SkXmAutoNegLipaXmac(pAC, IoC, Port, IsrcSum);
+	
+	if ((GpReg & XM_GP_INP_ASS) != 0 || (IsrcSum & XM_IS_INP_ASS) != 0) {
+		if ((GpReg & XM_GP_INP_ASS) == 0) {
+			/* Save Auto-negotiation Done interrupt only if link is in sync */
+			pPrt->PIsave = (SK_U16)(IsrcSum & XM_IS_AND);
+		}
+#ifdef DEBUG
+		if ((pPrt->PIsave & XM_IS_AND) != 0) {
+			SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+				("AutoNeg done rescheduled Port %d\n", Port));
+		}
+#endif /* DEBUG */
+		return(SK_HW_PS_NONE);
+	}
+
+	if (AutoNeg) {
+		if ((IsrcSum & XM_IS_AND) != 0) {
+			SkHWLinkUp(pAC, IoC, Port);
+			Done = SkMacAutoNegDone(pAC, IoC, Port);
+			if (Done != SK_AND_OK) {
+				/* Get PHY parameters, for debugging only */
+				SkXmPhyRead(pAC, IoC, Port, PHY_XMAC_AUNE_LP, &LpAb);
+				SkXmPhyRead(pAC, IoC, Port, PHY_XMAC_RES_ABI, &ResAb);
+				SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+					("AutoNeg FAIL Port %d (LpAb %x, ResAb %x)\n",
+					 Port, LpAb, ResAb));
+					
+				/* Try next possible mode */
+				NextMode = SkHWSenseGetNext(pAC, IoC, Port);
+				SkHWLinkDown(pAC, IoC, Port);
+				if (Done == SK_AND_DUP_CAP) {
+					/* GoTo next mode */
+					SkHWSenseSetNext(pAC, IoC, Port, NextMode);
+				}
+
+				return(SK_HW_PS_RESTART);
+			}
+			/*
+			 * Dummy Read extended status to prevent extra link down/ups
+			 * (clear Page Received bit if set)
+			 */
+			SkXmPhyRead(pAC, IoC, Port, PHY_XMAC_AUNE_EXP, &ExtStat);
+			
+			return(SK_HW_PS_LINK);
+		}
+		
+		/* AutoNeg not done, but HW link is up. Check for timeouts */
+		pPrt->PAutoNegTimeOut++;
+		if (pPrt->PAutoNegTimeOut >= SK_AND_MAX_TO) {
+			/* Increase the Timeout counter */
+			pPrt->PAutoNegTOCt++;
+
+			/* Timeout occured */
+			SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
+				("AutoNeg timeout Port %d\n", Port));
+			if (pPrt->PLinkModeConf == SK_LMODE_AUTOSENSE &&
+				pPrt->PLipaAutoNeg != SK_LIPA_AUTO) {
+				/* Set Link manually up */
+				SkHWSenseSetNext(pAC, IoC, Port, SK_LMODE_FULL);
+				SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
+					("Set manual full duplex Port %d\n", Port));
+			}
+
+			if (pPrt->PLinkModeConf == SK_LMODE_AUTOSENSE &&
+				pPrt->PLipaAutoNeg == SK_LIPA_AUTO &&
+				pPrt->PAutoNegTOCt >= SK_MAX_ANEG_TO) {
+				/*
+				 * This is rather complicated.
+				 * we need to check here whether the LIPA_AUTO
+				 * we saw before is false alert. We saw at one
+				 * switch ( SR8800) that on boot time it sends
+				 * just one auto-neg packet and does no further
+				 * auto-negotiation.
+				 * Solution: we restart the autosensing after
+				 * a few timeouts.
+				 */
+				pPrt->PAutoNegTOCt = 0;
+				pPrt->PLipaAutoNeg = SK_LIPA_UNKNOWN;
+				SkHWInitDefSense(pAC, IoC, Port);
+			}
+
+			/* Do the restart */
+			return(SK_HW_PS_RESTART);
+		}
+	}
+	else {
+		/* Link is up and we don't need more */
+#ifdef DEBUG
+		if (pPrt->PLipaAutoNeg == SK_LIPA_AUTO) {
+			SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+				("ERROR: Lipa auto detected on port %d\n", Port));
+		}
+#endif /* DEBUG */
+		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
+			("Link sync(GP), Port %d\n", Port));
+		SkHWLinkUp(pAC, IoC, Port);
+		
+		/*
+		 * Link sync (GP) and so assume a good connection. But if not received
+		 * a bunch of frames received in a time slot (maybe broken tx cable)
+		 * the port is restart.
+		 */
+		return(SK_HW_PS_LINK);
+	}
+
+	return(SK_HW_PS_NONE);
+}	/* SkGePortCheckUpXmac */
+
+
+/******************************************************************************
+ *
+ * SkGePortCheckUpBcom() - Check if the link is up on Bcom PHY
+ *
+ * return:
+ *	0	o.k. nothing needed
+ *	1	Restart needed on this port
+ *	2	Link came up
+ */
+static int SkGePortCheckUpBcom(
+SK_AC	*pAC,		/* Adapter Context */
+SK_IOC	IoC,		/* IO Context */
+int		Port,		/* Which port should be checked */
+SK_BOOL	AutoNeg)	/* Is Auto-negotiation used ? */
+{
+	SK_GEPORT	*pPrt;		/* GIni Port struct pointer */
+	int			Done;
+	SK_U16		Isrc;		/* Interrupt source register */
+	SK_U16		PhyStat;	/* Phy Status Register */
+	SK_U16		ResAb;		/* Master/Slave resolution */
+	SK_U16		Ctrl;		/* Broadcom control flags */
+#ifdef DEBUG
+	SK_U16		LpAb;
+	SK_U16		ExtStat;
+#endif /* DEBUG */
+
+	pPrt = &pAC->GIni.GP[Port];
+
+	/* Check for No HCD Link events (#10523) */
+	SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_INT_STAT, &Isrc);
+
+#ifdef xDEBUG
+	if ((Isrc & ~(PHY_B_IS_HCT | PHY_B_IS_LCT)) ==
+		(PHY_B_IS_SCR_S_ER | PHY_B_IS_RRS_CHANGE | PHY_B_IS_LRS_CHANGE)) {
+
+		SK_U32	Stat1, Stat2, Stat3;
+
+		Stat1 = 0;
+		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_INT_MASK, &Stat1);
+		CMSMPrintString(
+			pAC->pConfigTable,
+			MSG_TYPE_RUNTIME_INFO,
+			"CheckUp1 - Stat: %x, Mask: %x",
+			(void *)Isrc,
+			(void *)Stat1);
+
+		Stat1 = 0;
+		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_CTRL, &Stat1);
+		Stat2 = 0;
+		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_STAT, &Stat2);
+		Stat1 = Stat1 << 16 | Stat2;
+		Stat2 = 0;
+		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUNE_ADV, &Stat2);
+		Stat3 = 0;
+		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUNE_LP, &Stat3);
+		Stat2 = Stat2 << 16 | Stat3;
+		CMSMPrintString(
+			pAC->pConfigTable,
+			MSG_TYPE_RUNTIME_INFO,
+			"Ctrl/Stat: %x, AN Adv/LP: %x",
+			(void *)Stat1,
+			(void *)Stat2);
+
+		Stat1 = 0;
+		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUNE_EXP, &Stat1);
+		Stat2 = 0;
+		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_EXT_STAT, &Stat2);
+		Stat1 = Stat1 << 16 | Stat2;
+		Stat2 = 0;
+		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_1000T_CTRL, &Stat2);
+		Stat3 = 0;
+		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_1000T_STAT, &Stat3);
+		Stat2 = Stat2 << 16 | Stat3;
+		CMSMPrintString(
+			pAC->pConfigTable,
+			MSG_TYPE_RUNTIME_INFO,
+			"AN Exp/IEEE Ext: %x, 1000T Ctrl/Stat: %x",
+			(void *)Stat1,
+			(void *)Stat2);
+
+		Stat1 = 0;
+		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_P_EXT_CTRL, &Stat1);
+		Stat2 = 0;
+		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_P_EXT_STAT, &Stat2);
+		Stat1 = Stat1 << 16 | Stat2;
+		Stat2 = 0;
+		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUX_CTRL, &Stat2);
+		Stat3 = 0;
+		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUX_STAT, &Stat3);
+		Stat2 = Stat2 << 16 | Stat3;
+		CMSMPrintString(
+			pAC->pConfigTable,
+			MSG_TYPE_RUNTIME_INFO,
+			"PHY Ext Ctrl/Stat: %x, Aux Ctrl/Stat: %x",
+			(void *)Stat1,
+			(void *)Stat2);
+	}
+#endif /* DEBUG */
+
+	if ((Isrc & (PHY_B_IS_NO_HDCL /* | PHY_B_IS_NO_HDC */)) != 0) {
+		/*
+		 * Workaround BCom Errata:
+		 *	enable and disable loopback mode if "NO HCD" occurs.
+		 */
+		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_CTRL, &Ctrl);
+		SkXmPhyWrite(pAC, IoC, Port, PHY_BCOM_CTRL,
+			(SK_U16)(Ctrl | PHY_CT_LOOP));
+		SkXmPhyWrite(pAC, IoC, Port, PHY_BCOM_CTRL,
+			(SK_U16)(Ctrl & ~PHY_CT_LOOP));
+		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+			("No HCD Link event, Port %d\n", Port));
+#ifdef xDEBUG
+		CMSMPrintString(
+			pAC->pConfigTable,
+			MSG_TYPE_RUNTIME_INFO,
+			"No HCD link event, port %d.",
+			(void *)Port,
+			(void *)NULL);
+#endif /* DEBUG */
+	}
+
+	/* Not obsolete: link status bit is latched to 0 and autoclearing! */
+	SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_STAT, &PhyStat);
+
+	if (pPrt->PHWLinkUp) {
+		return(SK_HW_PS_NONE);
+	}
+
+#ifdef xDEBUG
+	{
+		SK_U32	Stat1, Stat2, Stat3;
+
+		Stat1 = 0;
+		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_INT_MASK, &Stat1);
+		CMSMPrintString(
+			pAC->pConfigTable,
+			MSG_TYPE_RUNTIME_INFO,
+			"CheckUp1a - Stat: %x, Mask: %x",
+			(void *)Isrc,
+			(void *)Stat1);
+
+		Stat1 = 0;
+		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_CTRL, &Stat1);
+		Stat2 = 0;
+		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_STAT, &PhyStat);
+		Stat1 = Stat1 << 16 | PhyStat;
+		Stat2 = 0;
+		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUNE_ADV, &Stat2);
+		Stat3 = 0;
+		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUNE_LP, &Stat3);
+		Stat2 = Stat2 << 16 | Stat3;
+		CMSMPrintString(
+			pAC->pConfigTable,
+			MSG_TYPE_RUNTIME_INFO,
+			"Ctrl/Stat: %x, AN Adv/LP: %x",
+			(void *)Stat1,
+			(void *)Stat2);
+
+		Stat1 = 0;
+		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUNE_EXP, &Stat1);
+		Stat2 = 0;
+		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_EXT_STAT, &Stat2);
+		Stat1 = Stat1 << 16 | Stat2;
+		Stat2 = 0;
+		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_1000T_CTRL, &Stat2);
+		Stat3 = 0;
+		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_1000T_STAT, &ResAb);
+		Stat2 = Stat2 << 16 | ResAb;
+		CMSMPrintString(
+			pAC->pConfigTable,
+			MSG_TYPE_RUNTIME_INFO,
+			"AN Exp/IEEE Ext: %x, 1000T Ctrl/Stat: %x",
+			(void *)Stat1,
+			(void *)Stat2);
+
+		Stat1 = 0;
+		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_P_EXT_CTRL, &Stat1);
+		Stat2 = 0;
+		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_P_EXT_STAT, &Stat2);
+		Stat1 = Stat1 << 16 | Stat2;
+		Stat2 = 0;
+		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUX_CTRL, &Stat2);
+		Stat3 = 0;
+		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUX_STAT, &Stat3);
+		Stat2 = Stat2 << 16 | Stat3;
+		CMSMPrintString(
+			pAC->pConfigTable,
+			MSG_TYPE_RUNTIME_INFO,
+			"PHY Ext Ctrl/Stat: %x, Aux Ctrl/Stat: %x",
+			(void *)Stat1,
+			(void *)Stat2);
+	}
+#endif /* DEBUG */
+
+	/*
+	 * Here we usually can check whether the link is in sync and
+	 * auto-negotiation is done.
+	 */
+
+	SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_STAT, &PhyStat);
+
+	SkMacAutoNegLipaPhy(pAC, IoC, Port, PhyStat);
+	
+	SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+		("CheckUp Port %d, PhyStat: 0x%04X\n", Port, PhyStat));
+
+	SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_1000T_STAT, &ResAb);
+
+	if ((ResAb & PHY_B_1000S_MSF) != 0) {
+		/* Error */
+		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+			("Master/Slave Fault port %d\n", Port));
+		
+		pPrt->PAutoNegFail = SK_TRUE;
+		pPrt->PMSStatus = SK_MS_STAT_FAULT;
+		
+		return(SK_HW_PS_RESTART);
+	}
+
+	if ((PhyStat & PHY_ST_LSYNC) == 0) {
+		return(SK_HW_PS_NONE);
+	}
+	
+	pPrt->PMSStatus = ((ResAb & PHY_B_1000S_MSR) != 0) ?
+		SK_MS_STAT_MASTER : SK_MS_STAT_SLAVE;
+	
+	SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+		("Port %d, ResAb: 0x%04X\n", Port, ResAb));
+
+	if (AutoNeg) {
+		if ((PhyStat & PHY_ST_AN_OVER) != 0) {
+			
+			SkHWLinkUp(pAC, IoC, Port);
+			
+			Done = SkMacAutoNegDone(pAC, IoC, Port);
+			
+			if (Done != SK_AND_OK) {
+#ifdef DEBUG
+				/* Get PHY parameters, for debugging only */
+				SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUNE_LP, &LpAb);
+				SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_1000T_STAT, &ExtStat);
+				SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+					("AutoNeg FAIL Port %d (LpAb %x, 1000TStat %x)\n",
+					Port, LpAb, ExtStat));
+#endif /* DEBUG */
+				return(SK_HW_PS_RESTART);
+			}
+			else {
+#ifdef xDEBUG
+				/* Dummy read ISR to prevent extra link downs/ups */
+				SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_INT_STAT, &ExtStat);
+
+				if ((ExtStat & ~(PHY_B_IS_HCT | PHY_B_IS_LCT)) != 0) {
+					CMSMPrintString(
+						pAC->pConfigTable,
+						MSG_TYPE_RUNTIME_INFO,
+						"CheckUp2 - Stat: %x",
+						(void *)ExtStat,
+						(void *)NULL);
+				}
+#endif /* DEBUG */
+				return(SK_HW_PS_LINK);
+			}
+		}
+	}
+	else {	/* !AutoNeg */
+		/* Link is up and we don't need more. */
+#ifdef DEBUG
+		if (pPrt->PLipaAutoNeg == SK_LIPA_AUTO) {
+			SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+				("ERROR: Lipa auto detected on port %d\n", Port));
+		}
+#endif /* DEBUG */
+
+#ifdef xDEBUG
+		/* Dummy read ISR to prevent extra link downs/ups */
+		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_INT_STAT, &ExtStat);
+
+		if ((ExtStat & ~(PHY_B_IS_HCT | PHY_B_IS_LCT)) != 0) {
+			CMSMPrintString(
+				pAC->pConfigTable,
+				MSG_TYPE_RUNTIME_INFO,
+				"CheckUp3 - Stat: %x",
+				(void *)ExtStat,
+				(void *)NULL);
+		}
+#endif /* DEBUG */
+		
+		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
+			("Link sync(GP), Port %d\n", Port));
+		SkHWLinkUp(pAC, IoC, Port);
+		
+		return(SK_HW_PS_LINK);
+	}
+
+	return(SK_HW_PS_NONE);
+}	/* SkGePortCheckUpBcom */
+#endif /* GENESIS */
+
+
+#ifdef YUKON
+/******************************************************************************
+ *
+ * SkGePortCheckUpGmac() - Check if the link is up on Marvell PHY
+ *
+ * return:
+ *	0	o.k. nothing needed
+ *	1	Restart needed on this port
+ *	2	Link came up
+ */
+static int SkGePortCheckUpGmac(
+SK_AC	*pAC,		/* Adapter Context */
+SK_IOC	IoC,		/* IO Context */
+int		Port,		/* Which port should be checked */
+SK_BOOL	AutoNeg)	/* Is Auto-negotiation used ? */
+{
+	SK_GEPORT	*pPrt;		/* GIni Port struct pointer */
+	int			Done;
+	SK_U16		PhyIsrc;	/* PHY Interrupt source */
+	SK_U16		PhyStat;	/* PPY Status */
+	SK_U16		PhySpecStat;/* PHY Specific Status */
+	SK_U16		ResAb;		/* Master/Slave resolution */
+	SK_EVPARA	Para;
+#ifdef DEBUG
+	SK_U16		Word;		/* I/O helper */
+#endif /* DEBUG */
+
+	pPrt = &pAC->GIni.GP[Port];
+
+	if (pPrt->PHWLinkUp) {
+		return(SK_HW_PS_NONE);
+	}
+
+	/* Read PHY Status */
+	SkGmPhyRead(pAC, IoC, Port, PHY_MARV_STAT, &PhyStat);
+
+	SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+		("CheckUp Port %d, PhyStat: 0x%04X\n", Port, PhyStat));
+
+	/* Read PHY Interrupt Status */
+	SkGmPhyRead(pAC, IoC, Port, PHY_MARV_INT_STAT, &PhyIsrc);
+
+	if ((PhyIsrc & PHY_M_IS_AN_COMPL) != 0) {
+		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+			("Auto-Negotiation Completed, PhyIsrc: 0x%04X\n", PhyIsrc));
+	}
+
+	if ((PhyIsrc & PHY_M_IS_LSP_CHANGE) != 0) {
+		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+			("Link Speed Changed, PhyIsrc: 0x%04X\n", PhyIsrc));
+	}
+
+	SkMacAutoNegLipaPhy(pAC, IoC, Port, PhyStat);
+	
+	SkGmPhyRead(pAC, IoC, Port, PHY_MARV_1000T_STAT, &ResAb);
+
+	if ((ResAb & PHY_B_1000S_MSF) != 0) {
+		/* Error */
+		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+			("Master/Slave Fault port %d\n", Port));
+		
+		pPrt->PAutoNegFail = SK_TRUE;
+		pPrt->PMSStatus = SK_MS_STAT_FAULT;
+		
+		return(SK_HW_PS_RESTART);
+	}
+
+	/* Read PHY Specific Status */
+	SkGmPhyRead(pAC, IoC, Port, PHY_MARV_PHY_STAT, &PhySpecStat);
+	
+	SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+		("Phy1000BT: 0x%04X, PhySpecStat: 0x%04X\n", ResAb, PhySpecStat));
+
+#ifdef DEBUG
+	SkGmPhyRead(pAC, IoC, Port, PHY_MARV_AUNE_EXP, &Word);
+
+	if ((PhyIsrc & PHY_M_IS_AN_PR) != 0 || (Word & PHY_ANE_RX_PG) != 0 ||
+		(PhySpecStat & PHY_M_PS_PAGE_REC) != 0)  {
+		/* Read PHY Next Page Link Partner */
+		SkGmPhyRead(pAC, IoC, Port, PHY_MARV_NEPG_LP, &Word);
+
+		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+			("Page Received, NextPage: 0x%04X\n", Word));
+	}
+#endif /* DEBUG */
+
+	if ((PhySpecStat & PHY_M_PS_LINK_UP) == 0) {
+		return(SK_HW_PS_NONE);
+	}
+	
+	if ((PhySpecStat & PHY_M_PS_DOWNS_STAT) != 0 ||
+		(PhyIsrc & PHY_M_IS_DOWNSH_DET) != 0) {
+		/* Downshift detected */
+		SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E025, SKERR_SIRQ_E025MSG);
+		
+		Para.Para64 = Port;
+		SkEventQueue(pAC, SKGE_DRV, SK_DRV_DOWNSHIFT_DET, Para);
+		
+		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+			("Downshift detected, PhyIsrc: 0x%04X\n", PhyIsrc));
+	}
+
+	pPrt->PMSStatus = ((ResAb & PHY_B_1000S_MSR) != 0) ?
+		SK_MS_STAT_MASTER : SK_MS_STAT_SLAVE;
+	
+	pPrt->PCableLen = (SK_U8)((PhySpecStat & PHY_M_PS_CABLE_MSK) >> 7);
+	
+	if (AutoNeg) {
+		/* Auto-Negotiation Over ? */
+		if ((PhyStat & PHY_ST_AN_OVER) != 0) {
+			
+			SkHWLinkUp(pAC, IoC, Port);
+			
+			Done = SkMacAutoNegDone(pAC, IoC, Port);
+			
+			if (Done != SK_AND_OK) {
+				return(SK_HW_PS_RESTART);
+			}
+			
+			return(SK_HW_PS_LINK);
+		}
+	}
+	else {	/* !AutoNeg */
+		/* Link is up and we don't need more */
+#ifdef DEBUG
+		if (pPrt->PLipaAutoNeg == SK_LIPA_AUTO) {
+			SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+				("ERROR: Lipa auto detected on port %d\n", Port));
+		}
+#endif /* DEBUG */
+
+		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
+			("Link sync, Port %d\n", Port));
+		SkHWLinkUp(pAC, IoC, Port);
+		
+		return(SK_HW_PS_LINK);
+	}
+
+	return(SK_HW_PS_NONE);
+}	/* SkGePortCheckUpGmac */
+#endif /* YUKON */
+
+
+#ifdef OTHER_PHY
+/******************************************************************************
+ *
+ * SkGePortCheckUpLone() - Check if the link is up on Level One PHY
+ *
+ * return:
+ *	0	o.k. nothing needed
+ *	1	Restart needed on this port
+ *	2	Link came up
+ */
+static int SkGePortCheckUpLone(
+SK_AC	*pAC,		/* Adapter Context */
+SK_IOC	IoC,		/* IO Context */
+int		Port,		/* Which port should be checked */
+SK_BOOL	AutoNeg)	/* Is Auto-negotiation used ? */
+{
+	SK_GEPORT	*pPrt;		/* GIni Port struct pointer */
+	int			Done;
+	SK_U16		Isrc;		/* Interrupt source register */
+	SK_U16		LpAb;		/* Link Partner Ability */
+	SK_U16		ExtStat;	/* Extended Status Register */
+	SK_U16		PhyStat;	/* Phy Status Register */
+	SK_U16		StatSum;
+	SK_U8		NextMode;	/* Next AutoSensing Mode */
+
+	pPrt = &pAC->GIni.GP[Port];
+
+	if (pPrt->PHWLinkUp) {
+		return(SK_HW_PS_NONE);
+	}
+
+	StatSum = pPrt->PIsave;
+	pPrt->PIsave = 0;
+
+	/*
+	 * here we usually can check whether the link is in sync and
+	 * auto-negotiation is done.
+	 */
+	SkXmPhyRead(pAC, IoC, Port, PHY_LONE_STAT, &PhyStat);
+	StatSum |= PhyStat;
+
+	SkMacAutoNegLipaPhy(pAC, IoC, Port, PhyStat);
+	
+	if ((PhyStat & PHY_ST_LSYNC) == 0) {
+		/* Save Auto-negotiation Done bit */
+		pPrt->PIsave = (SK_U16)(StatSum & PHY_ST_AN_OVER);
+#ifdef DEBUG
+		if ((pPrt->PIsave & PHY_ST_AN_OVER) != 0) {
+			SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+				("AutoNeg done rescheduled Port %d\n", Port));
+		}
+#endif /* DEBUG */
+		return(SK_HW_PS_NONE);
+	}
+
+	if (AutoNeg) {
+		if ((StatSum & PHY_ST_AN_OVER) != 0) {
+			SkHWLinkUp(pAC, IoC, Port);
+			Done = SkMacAutoNegDone(pAC, IoC, Port);
+			if (Done != SK_AND_OK) {
+				/* Get PHY parameters, for debugging only */
+				SkXmPhyRead(pAC, IoC, Port, PHY_LONE_AUNE_LP, &LpAb);
+				SkXmPhyRead(pAC, IoC, Port, PHY_LONE_1000T_STAT, &ExtStat);
+				SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+					("AutoNeg FAIL Port %d (LpAb %x, 1000TStat %x)\n",
+					 Port, LpAb, ExtStat));
+					
+				/* Try next possible mode */
+				NextMode = SkHWSenseGetNext(pAC, IoC, Port);
+				SkHWLinkDown(pAC, IoC, Port);
+				if (Done == SK_AND_DUP_CAP) {
+					/* GoTo next mode */
+					SkHWSenseSetNext(pAC, IoC, Port, NextMode);
+				}
+
+				return(SK_HW_PS_RESTART);
+
+			}
+			else {
+				/*
+				 * Dummy Read interrupt status to prevent
+				 * extra link down/ups
+				 */
+				SkXmPhyRead(pAC, IoC, Port, PHY_LONE_INT_STAT, &ExtStat);
+				return(SK_HW_PS_LINK);
+			}
+		}
+		
+		/* AutoNeg not done, but HW link is up. Check for timeouts */
+		pPrt->PAutoNegTimeOut++;
+		if (pPrt->PAutoNegTimeOut >= SK_AND_MAX_TO) {
+			/* Timeout occured */
+			SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
+				("AutoNeg timeout Port %d\n", Port));
+			if (pPrt->PLinkModeConf == SK_LMODE_AUTOSENSE &&
+				pPrt->PLipaAutoNeg != SK_LIPA_AUTO) {
+				/* Set Link manually up */
+				SkHWSenseSetNext(pAC, IoC, Port, SK_LMODE_FULL);
+				SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
+					("Set manual full duplex Port %d\n", Port));
+			}
+
+			/* Do the restart */
+			return(SK_HW_PS_RESTART);
+		}
+	}
+	else {
+		/* Link is up and we don't need more */
+#ifdef DEBUG
+		if (pPrt->PLipaAutoNeg == SK_LIPA_AUTO) {
+			SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+				("ERROR: Lipa auto detected on port %d\n", Port));
+		}
+#endif /* DEBUG */
+
+		/*
+		 * Dummy Read interrupt status to prevent
+		 * extra link down/ups
+		 */
+		SkXmPhyRead(pAC, IoC, Port, PHY_LONE_INT_STAT, &ExtStat);
+		
+		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
+			("Link sync(GP), Port %d\n", Port));
+		SkHWLinkUp(pAC, IoC, Port);
+		
+		return(SK_HW_PS_LINK);
+	}
+
+	return(SK_HW_PS_NONE);
+}	/* SkGePortCheckUpLone */
+
+
+/******************************************************************************
+ *
+ * SkGePortCheckUpNat() - Check if the link is up on National PHY
+ *
+ * return:
+ *	0	o.k. nothing needed
+ *	1	Restart needed on this port
+ *	2	Link came up
+ */
+static int SkGePortCheckUpNat(
+SK_AC	*pAC,		/* Adapter Context */
+SK_IOC	IoC,		/* IO Context */
+int		Port,		/* Which port should be checked */
+SK_BOOL	AutoNeg)	/* Is Auto-negotiation used ? */
+{
+	/* todo: National */
+	return(SK_HW_PS_NONE);
+}	/* SkGePortCheckUpNat */
+#endif /* OTHER_PHY */
+
+
+/******************************************************************************
+ *
+ *	SkGeSirqEvent() - Event Service Routine
+ *
+ * Description:
+ *
+ * Notes:
+ */
+int	SkGeSirqEvent(
+SK_AC		*pAC,		/* Adapter Context */
+SK_IOC		IoC,		/* Io Context */
+SK_U32		Event,		/* Module specific Event */
+SK_EVPARA	Para)		/* Event specific Parameter */
+{
+	SK_GEPORT	*pPrt;		/* GIni Port struct pointer */
+	SK_U32		Port;
+	SK_U32		Val32;
+	int			PortStat;
+	SK_U8		Val8;
+#ifdef GENESIS
+	SK_U64		Octets;
+#endif /* GENESIS */
+
+	Port = Para.Para32[0];
+	pPrt = &pAC->GIni.GP[Port];
+
+	switch (Event) {
+	case SK_HWEV_WATIM:
+		if (pPrt->PState == SK_PRT_RESET) {
+		
+			PortStat = SK_HW_PS_NONE;
+		}
+		else {
+			/* Check whether port came up */
+			PortStat = SkGePortCheckUp(pAC, IoC, (int)Port);
+		}
+
+		switch (PortStat) {
+		case SK_HW_PS_RESTART:
+			if (pPrt->PHWLinkUp) {
+				/* Set Link to down */
+				SkHWLinkDown(pAC, IoC, (int)Port);
+
+				/*
+				 * Signal directly to RLMT to ensure correct
+				 * sequence of SWITCH and RESET event.
+				 */
+				SkRlmtEvent(pAC, IoC, SK_RLMT_LINK_DOWN, Para);
+			}
+
+			/* Restart needed */
+			SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_RESET, Para);
+			break;
+
+		case SK_HW_PS_LINK:
+			/* Signal to RLMT */
+			SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_UP, Para);
+			break;
+		}
+		
+		/* Start again the check Timer */
+		if (pPrt->PHWLinkUp) {
+			Val32 = SK_WA_ACT_TIME;
+		}
+		else {
+			Val32 = SK_WA_INA_TIME;
+		}
+
+		/* Todo: still needed for non-XMAC PHYs??? */
+		/* Start workaround Errata #2 timer */
+		SkTimerStart(pAC, IoC, &pPrt->PWaTimer, Val32,
+			SKGE_HWAC, SK_HWEV_WATIM, Para);
+		break;
+
+	case SK_HWEV_PORT_START:
+		if (pPrt->PHWLinkUp) {
+			/*
+			 * Signal directly to RLMT to ensure correct
+			 * sequence of SWITCH and RESET event.
+			 */
+			SkRlmtEvent(pAC, IoC, SK_RLMT_LINK_DOWN, Para);
+		}
+
+		SkHWLinkDown(pAC, IoC, (int)Port);
+
+		/* Schedule Port RESET */
+		SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_RESET, Para);
+
+		/* Start workaround Errata #2 timer */
+		SkTimerStart(pAC, IoC, &pPrt->PWaTimer, SK_WA_INA_TIME,
+			SKGE_HWAC, SK_HWEV_WATIM, Para);
+		break;
+
+	case SK_HWEV_PORT_STOP:
+		if (pPrt->PHWLinkUp) {
+			/*
+			 * Signal directly to RLMT to ensure correct
+			 * sequence of SWITCH and RESET event.
+			 */
+			SkRlmtEvent(pAC, IoC, SK_RLMT_LINK_DOWN, Para);
+		}
+
+		/* Stop Workaround Timer */
+		SkTimerStop(pAC, IoC, &pPrt->PWaTimer);
+
+		SkHWLinkDown(pAC, IoC, (int)Port);
+		break;
+
+	case SK_HWEV_UPDATE_STAT:
+		/* We do NOT need to update any statistics */
+		break;
+
+	case SK_HWEV_CLEAR_STAT:
+		/* We do NOT need to clear any statistics */
+		for (Port = 0; Port < (SK_U32)pAC->GIni.GIMacsFound; Port++) {
+			pPrt->PPrevRx = 0;
+			pPrt->PPrevFcs = 0;
+			pPrt->PPrevShorts = 0;
+		}
+		break;
+
+	case SK_HWEV_SET_LMODE:
+		Val8 = (SK_U8)Para.Para32[1];
+		if (pPrt->PLinkModeConf != Val8) {
+			/* Set New link mode */
+			pPrt->PLinkModeConf = Val8;
+
+			/* Restart Port */
+			SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_STOP, Para);
+			SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_START, Para);
+		}
+		break;
+
+	case SK_HWEV_SET_FLOWMODE:
+		Val8 = (SK_U8)Para.Para32[1];
+		if (pPrt->PFlowCtrlMode != Val8) {
+			/* Set New Flow Control mode */
+			pPrt->PFlowCtrlMode = Val8;
+
+			/* Restart Port */
+			SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_STOP, Para);
+			SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_START, Para);
+		}
+		break;
+
+	case SK_HWEV_SET_ROLE:
+		/* not possible for fiber */
+		if (!pAC->GIni.GICopperType) {
+			break;
+		}
+		Val8 = (SK_U8)Para.Para32[1];
+		if (pPrt->PMSMode != Val8) {
+			/* Set New Role (Master/Slave) mode */
+			pPrt->PMSMode = Val8;
+
+			/* Restart Port */
+			SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_STOP, Para);
+			SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_START, Para);
+		}
+		break;
+
+	case SK_HWEV_SET_SPEED:
+		if (pPrt->PhyType != SK_PHY_MARV_COPPER) {
+			break;
+		}
+		Val8 = (SK_U8)Para.Para32[1];
+		if (pPrt->PLinkSpeed != Val8) {
+			/* Set New Speed parameter */
+			pPrt->PLinkSpeed = Val8;
+
+			/* Restart Port */
+			SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_STOP, Para);
+			SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_START, Para);
+		}
+		break;
+
+#ifdef GENESIS
+	case SK_HWEV_HALFDUP_CHK:
+		if (pAC->GIni.GIGenesis) {
+			/*
+			 * half duplex hangup workaround.
+			 * See packet arbiter timeout interrupt for description
+			 */
+			pPrt->HalfDupTimerActive = SK_FALSE;
+			if (pPrt->PLinkModeStatus == SK_LMODE_STAT_HALF ||
+				pPrt->PLinkModeStatus == SK_LMODE_STAT_AUTOHALF) {
+				/* Snap statistic counters */
+				(void)SkXmUpdateStats(pAC, IoC, Port);
+
+				(void)SkXmMacStatistic(pAC, IoC, Port, XM_TXO_OK_HI, &Val32);
+
+				Octets = (SK_U64)Val32 << 32;
+				
+				(void)SkXmMacStatistic(pAC, IoC, Port, XM_TXO_OK_LO, &Val32);
+
+				Octets += Val32;
+				
+				if (pPrt->LastOctets == Octets) {
+					/* Tx hanging, a FIFO flush restarts it */
+					SkMacFlushTxFifo(pAC, IoC, Port);
+				}
+			}
+		}
+		break;
+#endif /* GENESIS */
+	
+	default:
+		SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_SIRQ_E001, SKERR_SIRQ_E001MSG);
+		break;
+	}
+
+	return(0);
+}	/* SkGeSirqEvent */
+
+
+#ifdef GENESIS
+/******************************************************************************
+ *
+ *	SkPhyIsrBcom() - PHY interrupt service routine
+ *
+ * Description: handles all interrupts from BCom PHY
+ *
+ * Returns: N/A
+ */
+static void SkPhyIsrBcom(
+SK_AC		*pAC,		/* Adapter Context */
+SK_IOC		IoC,		/* Io Context */
+int			Port,		/* Port Num = PHY Num */
+SK_U16		IStatus)	/* Interrupt Status */
+{
+	SK_GEPORT	*pPrt;		/* GIni Port struct pointer */
+	SK_EVPARA	Para;
+
+	pPrt = &pAC->GIni.GP[Port];
+
+	if ((IStatus & PHY_B_IS_PSE) != 0) {
+		/* Incorrectable pair swap error */
+		SK_ERR_LOG(pAC, SK_ERRCL_HW | SK_ERRCL_INIT, SKERR_SIRQ_E022,
+			SKERR_SIRQ_E022MSG);
+	}
+	
+	if ((IStatus & (PHY_B_IS_AN_PR | PHY_B_IS_LST_CHANGE)) != 0) {
+
+		SkHWLinkDown(pAC, IoC, Port);
+
+		Para.Para32[0] = (SK_U32)Port;
+		/* Signal to RLMT */
+		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para);
+
+		/* Start workaround Errata #2 timer */
+		SkTimerStart(pAC, IoC, &pPrt->PWaTimer, SK_WA_INA_TIME,
+			SKGE_HWAC, SK_HWEV_WATIM, Para);
+	}
+
+}	/* SkPhyIsrBcom */
+#endif /* GENESIS */
+
+
+#ifdef YUKON
+/******************************************************************************
+ *
+ *	SkPhyIsrGmac() - PHY interrupt service routine
+ *
+ * Description: handles all interrupts from Marvell PHY
+ *
+ * Returns: N/A
+ */
+static void SkPhyIsrGmac(
+SK_AC		*pAC,		/* Adapter Context */
+SK_IOC		IoC,		/* Io Context */
+int			Port,		/* Port Num = PHY Num */
+SK_U16		IStatus)	/* Interrupt Status */
+{
+	SK_GEPORT	*pPrt;		/* GIni Port struct pointer */
+	SK_EVPARA	Para;
+	SK_U16		Word;
+
+	pPrt = &pAC->GIni.GP[Port];
+
+	if ((IStatus & (PHY_M_IS_AN_PR | PHY_M_IS_LST_CHANGE)) != 0) {
+
+		SkHWLinkDown(pAC, IoC, Port);
+
+		SkGmPhyRead(pAC, IoC, Port, PHY_MARV_AUNE_ADV, &Word);
+
+		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+			("AutoNeg.Adv: 0x%04X\n", Word));
+		
+		/* Set Auto-negotiation advertisement */
+		if (pPrt->PFlowCtrlMode == SK_FLOW_MODE_SYM_OR_REM) {
+			/* restore Asymmetric Pause bit */
+			SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_AUNE_ADV,
+				(SK_U16)(Word | PHY_M_AN_ASP));
+		}
+		
+		Para.Para32[0] = (SK_U32)Port;
+		/* Signal to RLMT */
+		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para);
+	}
+	
+	if ((IStatus & PHY_M_IS_AN_ERROR) != 0) {
+		/* Auto-Negotiation Error */
+		SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E023, SKERR_SIRQ_E023MSG);
+	}
+	
+	if ((IStatus & PHY_M_IS_FIFO_ERROR) != 0) {
+		/* FIFO Overflow/Underrun Error */
+		SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E024, SKERR_SIRQ_E024MSG);
+	}
+	
+}	/* SkPhyIsrGmac */
+#endif /* YUKON */
+
+
+#ifdef OTHER_PHY
+/******************************************************************************
+ *
+ *	SkPhyIsrLone() - PHY interrupt service routine
+ *
+ * Description: handles all interrupts from LONE PHY
+ *
+ * Returns: N/A
+ */
+static void SkPhyIsrLone(
+SK_AC	*pAC,		/* Adapter Context */
+SK_IOC	IoC,		/* Io Context */
+int		Port,		/* Port Num = PHY Num */
+SK_U16	IStatus)	/* Interrupt Status */
+{
+	SK_EVPARA	Para;
+
+	if (IStatus & (PHY_L_IS_DUP | PHY_L_IS_ISOL)) {
+		
+		SkHWLinkDown(pAC, IoC, Port);
+
+		Para.Para32[0] = (SK_U32)Port;
+		/* Signal to RLMT */
+		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para);
+	}
+
+}	/* SkPhyIsrLone */
+#endif /* OTHER_PHY */
+
+/* End of File */
diff --git a/drivers/net/sk98lin/ski2c.c b/drivers/net/sk98lin/ski2c.c
new file mode 100644
index 0000000..79bf57c
--- /dev/null
+++ b/drivers/net/sk98lin/ski2c.c
@@ -0,0 +1,1296 @@
+/******************************************************************************
+ *
+ * Name:	ski2c.c
+ * Project:	Gigabit Ethernet Adapters, TWSI-Module
+ * Version:	$Revision: 1.59 $
+ * Date:	$Date: 2003/10/20 09:07:25 $
+ * Purpose:	Functions to access Voltage and Temperature Sensor
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *	(C)Copyright 1998-2002 SysKonnect.
+ *	(C)Copyright 2002-2003 Marvell.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/*
+ *	I2C Protocol
+ */
+#if (defined(DEBUG) || ((!defined(LINT)) && (!defined(SK_SLIM))))
+static const char SysKonnectFileId[] =
+	"@(#) $Id: ski2c.c,v 1.59 2003/10/20 09:07:25 rschmidt Exp $ (C) Marvell. ";
+#endif
+
+#include "h/skdrv1st.h"		/* Driver Specific Definitions */
+#include "h/lm80.h"
+#include "h/skdrv2nd.h"		/* Adapter Control- and Driver specific Def. */
+
+#ifdef __C2MAN__
+/*
+	I2C protocol implementation.
+
+	General Description:
+
+	The I2C protocol is used for the temperature sensors and for
+	the serial EEPROM which hold the configuration.
+
+	This file covers functions that allow to read write and do
+	some bulk requests a specified I2C address.
+
+	The Genesis has 2 I2C buses. One for the EEPROM which holds
+	the VPD Data and one for temperature and voltage sensor.
+	The following picture shows the I2C buses, I2C devices and
+	their control registers.
+
+	Note: The VPD functions are in skvpd.c
+.
+.	PCI Config I2C Bus for VPD Data:
+.
+.		      +------------+
+.		      | VPD EEPROM |
+.		      +------------+
+.			     |
+.			     | <-- I2C
+.			     |
+.		 +-----------+-----------+
+.		 |			 |
+.	+-----------------+	+-----------------+
+.	| PCI_VPD_ADR_REG |	| PCI_VPD_DAT_REG |
+.	+-----------------+	+-----------------+
+.
+.
+.	I2C Bus for LM80 sensor:
+.
+.			+-----------------+
+.			| Temperature and |
+.			| Voltage Sensor  |
+.			| 	LM80	  |
+.			+-----------------+
+.				|
+.				|
+.			I2C --> |
+.				|
+.			     +----+
+.	     +-------------->| OR |<--+
+.	     |		     +----+   |
+.     +------+------+		      |
+.     |		    |		      |
+. +--------+	+--------+	+----------+
+. | B2_I2C |	| B2_I2C |	|  B2_I2C  |
+. | _CTRL  |	| _DATA  |	|   _SW    |
+. +--------+	+--------+	+----------+
+.
+	The I2C bus may be driven by the B2_I2C_SW or by the B2_I2C_CTRL
+	and B2_I2C_DATA registers.
+	For driver software it is recommended to use the I2C control and
+	data register, because I2C bus timing is done by the ASIC and
+	an interrupt may be received when the I2C request is completed.
+
+	Clock Rate Timing:			MIN	MAX	generated by
+		VPD EEPROM:			50 kHz	100 kHz		HW
+		LM80 over I2C Ctrl/Data reg.	50 kHz	100 kHz		HW
+		LM80 over B2_I2C_SW register	0	400 kHz		SW
+
+	Note:	The clock generated by the hardware is dependend on the
+		PCI clock. If the PCI bus clock is 33 MHz, the I2C/VPD
+		clock is 50 kHz.
+ */
+intro()
+{}
+#endif
+
+#ifdef SK_DIAG
+/*
+ * I2C Fast Mode timing values used by the LM80.
+ * If new devices are added to the I2C bus the timing values have to be checked.
+ */
+#ifndef I2C_SLOW_TIMING
+#define	T_CLK_LOW			1300L	/* clock low time in ns */
+#define	T_CLK_HIGH		 	 600L	/* clock high time in ns */
+#define T_DATA_IN_SETUP		 100L	/* data in Set-up Time */
+#define T_START_HOLD		 600L	/* start condition hold time */
+#define T_START_SETUP		 600L	/* start condition Set-up time */
+#define	T_STOP_SETUP		 600L	/* stop condition Set-up time */
+#define T_BUS_IDLE			1300L	/* time the bus must free after Tx */
+#define	T_CLK_2_DATA_OUT	 900L	/* max. clock low to data output valid */
+#else	/* I2C_SLOW_TIMING */
+/* I2C Standard Mode Timing */
+#define	T_CLK_LOW			4700L	/* clock low time in ns */
+#define	T_CLK_HIGH			4000L	/* clock high time in ns */
+#define T_DATA_IN_SETUP		 250L	/* data in Set-up Time */
+#define T_START_HOLD		4000L	/* start condition hold time */
+#define T_START_SETUP		4700L	/* start condition Set-up time */
+#define	T_STOP_SETUP		4000L	/* stop condition Set-up time */
+#define T_BUS_IDLE			4700L	/* time the bus must free after Tx */
+#endif	/* !I2C_SLOW_TIMING */
+
+#define NS2BCLK(x)	(((x)*125)/10000)
+
+/*
+ * I2C Wire Operations
+ *
+ * About I2C_CLK_LOW():
+ *
+ * The Data Direction bit (I2C_DATA_DIR) has to be set to input when setting
+ * clock to low, to prevent the ASIC and the I2C data client from driving the
+ * serial data line simultaneously (ASIC: last bit of a byte = '1', I2C client
+ * send an 'ACK'). See also Concentrator Bugreport No. 10192.
+ */
+#define I2C_DATA_HIGH(IoC)	SK_I2C_SET_BIT(IoC, I2C_DATA)
+#define	I2C_DATA_LOW(IoC)	SK_I2C_CLR_BIT(IoC, I2C_DATA)
+#define	I2C_DATA_OUT(IoC)	SK_I2C_SET_BIT(IoC, I2C_DATA_DIR)
+#define	I2C_DATA_IN(IoC)	SK_I2C_CLR_BIT(IoC, I2C_DATA_DIR | I2C_DATA)
+#define	I2C_CLK_HIGH(IoC)	SK_I2C_SET_BIT(IoC, I2C_CLK)
+#define	I2C_CLK_LOW(IoC)	SK_I2C_CLR_BIT(IoC, I2C_CLK | I2C_DATA_DIR)
+#define	I2C_START_COND(IoC)	SK_I2C_CLR_BIT(IoC, I2C_CLK)
+
+#define NS2CLKT(x)	((x*125L)/10000)
+
+/*--------------- I2C Interface Register Functions --------------- */
+
+/*
+ * sending one bit
+ */
+void SkI2cSndBit(
+SK_IOC	IoC,	/* I/O Context */
+SK_U8	Bit)	/* Bit to send */
+{
+	I2C_DATA_OUT(IoC);
+	if (Bit) {
+		I2C_DATA_HIGH(IoC);
+	}
+	else {
+		I2C_DATA_LOW(IoC);
+	}
+	SkDgWaitTime(IoC, NS2BCLK(T_DATA_IN_SETUP));
+	I2C_CLK_HIGH(IoC);
+	SkDgWaitTime(IoC, NS2BCLK(T_CLK_HIGH));
+	I2C_CLK_LOW(IoC);
+}	/* SkI2cSndBit*/
+
+
+/*
+ * Signal a start to the I2C Bus.
+ *
+ * A start is signaled when data goes to low in a high clock cycle.
+ *
+ * Ends with Clock Low.
+ *
+ * Status: not tested
+ */
+void SkI2cStart(
+SK_IOC	IoC)	/* I/O Context */
+{
+	/* Init data and Clock to output lines */
+	/* Set Data high */
+	I2C_DATA_OUT(IoC);
+	I2C_DATA_HIGH(IoC);
+	/* Set Clock high */
+	I2C_CLK_HIGH(IoC);
+
+	SkDgWaitTime(IoC, NS2BCLK(T_START_SETUP));
+
+	/* Set Data Low */
+	I2C_DATA_LOW(IoC);
+
+	SkDgWaitTime(IoC, NS2BCLK(T_START_HOLD));
+
+	/* Clock low without Data to Input */
+	I2C_START_COND(IoC);
+
+	SkDgWaitTime(IoC, NS2BCLK(T_CLK_LOW));
+}	/* SkI2cStart */
+
+
+void SkI2cStop(
+SK_IOC	IoC)	/* I/O Context */
+{
+	/* Init data and Clock to output lines */
+	/* Set Data low */
+	I2C_DATA_OUT(IoC);
+	I2C_DATA_LOW(IoC);
+
+	SkDgWaitTime(IoC, NS2BCLK(T_CLK_2_DATA_OUT));
+
+	/* Set Clock high */
+	I2C_CLK_HIGH(IoC);
+
+	SkDgWaitTime(IoC, NS2BCLK(T_STOP_SETUP));
+
+	/*
+	 * Set Data High:	Do it by setting the Data Line to Input.
+	 *			Because of a pull up resistor the Data Line
+	 *			floods to high.
+	 */
+	I2C_DATA_IN(IoC);
+
+	/*
+	 *	When I2C activity is stopped
+	 *	 o	DATA should be set to input and
+	 *	 o	CLOCK should be set to high!
+	 */
+	SkDgWaitTime(IoC, NS2BCLK(T_BUS_IDLE));
+}	/* SkI2cStop */
+
+
+/*
+ * Receive just one bit via the I2C bus.
+ *
+ * Note:	Clock must be set to LOW before calling this function.
+ *
+ * Returns The received bit.
+ */
+int SkI2cRcvBit(
+SK_IOC	IoC)	/* I/O Context */
+{
+	int	Bit;
+	SK_U8	I2cSwCtrl;
+
+	/* Init data as input line */
+	I2C_DATA_IN(IoC);
+
+	SkDgWaitTime(IoC, NS2BCLK(T_CLK_2_DATA_OUT));
+
+	I2C_CLK_HIGH(IoC);
+
+	SkDgWaitTime(IoC, NS2BCLK(T_CLK_HIGH));
+
+	SK_I2C_GET_SW(IoC, &I2cSwCtrl);
+	
+	Bit = (I2cSwCtrl & I2C_DATA) ? 1 : 0;
+
+	I2C_CLK_LOW(IoC);
+	SkDgWaitTime(IoC, NS2BCLK(T_CLK_LOW-T_CLK_2_DATA_OUT));
+
+	return(Bit);
+}	/* SkI2cRcvBit */
+
+
+/*
+ * Receive an ACK.
+ *
+ * returns	0 If acknowledged
+ *		1 in case of an error
+ */
+int SkI2cRcvAck(
+SK_IOC	IoC)	/* I/O Context */
+{
+	/*
+	 * Received bit must be zero.
+	 */
+	return(SkI2cRcvBit(IoC) != 0);
+}	/* SkI2cRcvAck */
+
+
+/*
+ * Send an NACK.
+ */
+void SkI2cSndNAck(
+SK_IOC	IoC)	/* I/O Context */
+{
+	/*
+	 * Received bit must be zero.
+	 */
+	SkI2cSndBit(IoC, 1);
+}	/* SkI2cSndNAck */
+
+
+/*
+ * Send an ACK.
+ */
+void SkI2cSndAck(
+SK_IOC IoC)	/* I/O Context */
+{
+	/*
+	 * Received bit must be zero.
+	 */
+	SkI2cSndBit(IoC, 0);
+}	/* SkI2cSndAck */
+
+
+/*
+ * Send one byte to the I2C device and wait for ACK.
+ *
+ * Return acknowleged status.
+ */
+int SkI2cSndByte(
+SK_IOC	IoC,	/* I/O Context */
+int		Byte)	/* byte to send */
+{
+	int	i;
+
+	for (i = 0; i < 8; i++) {
+		if (Byte & (1<<(7-i))) {
+			SkI2cSndBit(IoC, 1);
+		}
+		else {
+			SkI2cSndBit(IoC, 0);
+		}
+	}
+
+	return(SkI2cRcvAck(IoC));
+}	/* SkI2cSndByte */
+
+
+/*
+ * Receive one byte and ack it.
+ *
+ * Return byte.
+ */
+int SkI2cRcvByte(
+SK_IOC	IoC,	/* I/O Context */
+int		Last)	/* Last Byte Flag */
+{
+	int	i;
+	int	Byte = 0;
+
+	for (i = 0; i < 8; i++) {
+		Byte <<= 1;
+		Byte |= SkI2cRcvBit(IoC);
+	}
+
+	if (Last) {
+		SkI2cSndNAck(IoC);
+	}
+	else {
+		SkI2cSndAck(IoC);
+	}
+
+	return(Byte);
+}	/* SkI2cRcvByte */
+
+
+/*
+ * Start dialog and send device address
+ *
+ * Return 0 if acknowleged, 1 in case of an error
+ */
+int	SkI2cSndDev(
+SK_IOC	IoC,	/* I/O Context */
+int		Addr,	/* Device Address */
+int		Rw)		/* Read / Write Flag */
+{
+	SkI2cStart(IoC);
+	Rw = ~Rw;
+	Rw &= I2C_WRITE;
+	return(SkI2cSndByte(IoC, (Addr<<1) | Rw));
+}	/* SkI2cSndDev */
+
+#endif /* SK_DIAG */
+
+/*----------------- I2C CTRL Register Functions ----------*/
+
+/*
+ * waits for a completion of an I2C transfer
+ *
+ * returns	0:	success, transfer completes
+ *			1:	error,	 transfer does not complete, I2C transfer
+ *						 killed, wait loop terminated.
+ */
+static int	SkI2cWait(
+SK_AC	*pAC,	/* Adapter Context */
+SK_IOC	IoC,	/* I/O Context */
+int		Event)	/* complete event to wait for (I2C_READ or I2C_WRITE) */
+{
+	SK_U64	StartTime;
+	SK_U64	CurrentTime;
+	SK_U32	I2cCtrl;
+
+	StartTime = SkOsGetTime(pAC);
+	
+	do {
+		CurrentTime = SkOsGetTime(pAC);
+
+		if (CurrentTime - StartTime > SK_TICKS_PER_SEC / 8) {
+			
+			SK_I2C_STOP(IoC);
+#ifndef SK_DIAG
+			SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_I2C_E002, SKERR_I2C_E002MSG);
+#endif /* !SK_DIAG */
+			return(1);
+		}
+		
+		SK_I2C_GET_CTL(IoC, &I2cCtrl);
+
+#ifdef xYUKON_DBG
+		printf("StartTime=%lu, CurrentTime=%lu\n",
+			StartTime, CurrentTime);
+		if (kbhit()) {
+			return(1);
+		}
+#endif /* YUKON_DBG */
+	
+	} while ((I2cCtrl & I2C_FLAG) == (SK_U32)Event << 31);
+
+	return(0);
+}	/* SkI2cWait */
+
+
+/*
+ * waits for a completion of an I2C transfer
+ *
+ * Returns
+ *	Nothing
+ */
+void SkI2cWaitIrq(
+SK_AC	*pAC,	/* Adapter Context */
+SK_IOC	IoC)	/* I/O Context */
+{
+	SK_SENSOR	*pSen;
+	SK_U64		StartTime;
+	SK_U32		IrqSrc;
+
+	pSen = &pAC->I2c.SenTable[pAC->I2c.CurrSens];
+
+	if (pSen->SenState == SK_SEN_IDLE) {
+		return;
+	}
+
+	StartTime = SkOsGetTime(pAC);
+	
+	do {
+		if (SkOsGetTime(pAC) - StartTime > SK_TICKS_PER_SEC / 8) {
+			
+			SK_I2C_STOP(IoC);
+#ifndef SK_DIAG
+			SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_I2C_E016, SKERR_I2C_E016MSG);
+#endif /* !SK_DIAG */
+			return;
+		}
+		
+		SK_IN32(IoC, B0_ISRC, &IrqSrc);
+
+	} while ((IrqSrc & IS_I2C_READY) == 0);
+
+	pSen->SenState = SK_SEN_IDLE;
+	return;
+}	/* SkI2cWaitIrq */
+
+/*
+ * writes a single byte or 4 bytes into the I2C device
+ *
+ * returns	0:	success
+ *			1:	error
+ */
+static int SkI2cWrite(
+SK_AC	*pAC,		/* Adapter Context */
+SK_IOC	IoC,		/* I/O Context */
+SK_U32	I2cData,	/* I2C Data to write */
+int		I2cDev,		/* I2C Device Address */
+int		I2cDevSize, /* I2C Device Size (e.g. I2C_025K_DEV or I2C_2K_DEV) */
+int		I2cReg,		/* I2C Device Register Address */
+int		I2cBurst)	/* I2C Burst Flag */
+{
+	SK_OUT32(IoC, B2_I2C_DATA, I2cData);
+	
+	SK_I2C_CTL(IoC, I2C_WRITE, I2cDev, I2cDevSize, I2cReg, I2cBurst);
+	
+	return(SkI2cWait(pAC, IoC, I2C_WRITE));
+}	/* SkI2cWrite*/
+
+
+#ifdef	SK_DIAG
+/*
+ * reads a single byte or 4 bytes from the I2C device
+ *
+ * returns	the word read
+ */
+SK_U32 SkI2cRead(
+SK_AC	*pAC,		/* Adapter Context */
+SK_IOC	IoC,		/* I/O Context */
+int		I2cDev,		/* I2C Device Address */
+int		I2cDevSize, /* I2C Device Size (e.g. I2C_025K_DEV or I2C_2K_DEV) */
+int		I2cReg,		/* I2C Device Register Address */
+int		I2cBurst)	/* I2C Burst Flag */
+{
+	SK_U32	Data;
+
+	SK_OUT32(IoC, B2_I2C_DATA, 0);
+	SK_I2C_CTL(IoC, I2C_READ, I2cDev, I2cDevSize, I2cReg, I2cBurst);
+	
+	if (SkI2cWait(pAC, IoC, I2C_READ) != 0) {
+		w_print("%s\n", SKERR_I2C_E002MSG);
+	}
+	
+	SK_IN32(IoC, B2_I2C_DATA, &Data);
+	
+	return(Data);
+}	/* SkI2cRead */
+#endif /* SK_DIAG */
+
+
+/*
+ * read a sensor's value
+ *
+ * This function reads a sensor's value from the I2C sensor chip. The sensor
+ * is defined by its index into the sensors database in the struct pAC points
+ * to.
+ * Returns
+ *		1 if the read is completed
+ *		0 if the read must be continued (I2C Bus still allocated)
+ */
+static int	SkI2cReadSensor(
+SK_AC		*pAC,	/* Adapter Context */
+SK_IOC		IoC,	/* I/O Context */
+SK_SENSOR	*pSen)	/* Sensor to be read */
+{
+    if (pSen->SenRead != NULL) {
+        return((*pSen->SenRead)(pAC, IoC, pSen));
+    }
+	else {
+        return(0); /* no success */
+	}
+}	/* SkI2cReadSensor */
+
+/*
+ * Do the Init state 0 initialization
+ */
+static int SkI2cInit0(
+SK_AC	*pAC)	/* Adapter Context */
+{
+	int	i;
+
+	/* Begin with first sensor */
+	pAC->I2c.CurrSens = 0;
+	
+	/* Begin with timeout control for state machine */
+	pAC->I2c.TimerMode = SK_TIMER_WATCH_SM;
+	
+	/* Set sensor number to zero */
+	pAC->I2c.MaxSens = 0;
+
+#ifndef SK_DIAG
+	/* Initialize Number of Dummy Reads */
+	pAC->I2c.DummyReads = SK_MAX_SENSORS;
+#endif
+
+	for (i = 0; i < SK_MAX_SENSORS; i++) {
+		pAC->I2c.SenTable[i].SenDesc = "unknown";
+		pAC->I2c.SenTable[i].SenType = SK_SEN_UNKNOWN;
+		pAC->I2c.SenTable[i].SenThreErrHigh = 0;
+		pAC->I2c.SenTable[i].SenThreErrLow = 0;
+		pAC->I2c.SenTable[i].SenThreWarnHigh = 0;
+		pAC->I2c.SenTable[i].SenThreWarnLow = 0;
+		pAC->I2c.SenTable[i].SenReg = LM80_FAN2_IN;
+		pAC->I2c.SenTable[i].SenInit = SK_SEN_DYN_INIT_NONE;
+		pAC->I2c.SenTable[i].SenValue = 0;
+		pAC->I2c.SenTable[i].SenErrFlag = SK_SEN_ERR_NOT_PRESENT;
+		pAC->I2c.SenTable[i].SenErrCts = 0;
+		pAC->I2c.SenTable[i].SenBegErrTS = 0;
+		pAC->I2c.SenTable[i].SenState = SK_SEN_IDLE;
+		pAC->I2c.SenTable[i].SenRead = NULL;
+		pAC->I2c.SenTable[i].SenDev = 0;
+	}
+
+	/* Now we are "INIT data"ed */
+	pAC->I2c.InitLevel = SK_INIT_DATA;
+	return(0);
+}	/* SkI2cInit0*/
+
+
+/*
+ * Do the init state 1 initialization
+ *
+ * initialize the following register of the LM80:
+ * Configuration register:
+ * - START, noINT, activeLOW, noINT#Clear, noRESET, noCI, noGPO#, noINIT
+ *
+ * Interrupt Mask Register 1:
+ * - all interrupts are Disabled (0xff)
+ *
+ * Interrupt Mask Register 2:
+ * - all interrupts are Disabled (0xff) Interrupt modi doesn't matter.
+ *
+ * Fan Divisor/RST_OUT register:
+ * - Divisors set to 1 (bits 00), all others 0s.
+ *
+ * OS# Configuration/Temperature resolution Register:
+ * - all 0s
+ *
+ */
+static int SkI2cInit1(
+SK_AC	*pAC,	/* Adapter Context */
+SK_IOC	IoC)	/* I/O Context */
+{
+    int i;
+    SK_U8 I2cSwCtrl;
+	SK_GEPORT *pPrt;	/* GIni Port struct pointer */
+
+	if (pAC->I2c.InitLevel != SK_INIT_DATA) {
+		/* ReInit not needed in I2C module */
+		return(0);
+	}
+
+    /* Set the Direction of I2C-Data Pin to IN */
+    SK_I2C_CLR_BIT(IoC, I2C_DATA_DIR | I2C_DATA);
+    /* Check for 32-Bit Yukon with Low at I2C-Data Pin */
+	SK_I2C_GET_SW(IoC, &I2cSwCtrl);
+
+	if ((I2cSwCtrl & I2C_DATA) == 0) {
+		/* this is a 32-Bit board */
+		pAC->GIni.GIYukon32Bit = SK_TRUE;
+        return(0);
+    }
+
+	/* Check for 64 Bit Yukon without sensors */
+	if (SkI2cWrite(pAC, IoC, 0, LM80_ADDR, I2C_025K_DEV, LM80_CFG, 0) != 0) {
+        return(0);
+    }
+
+	(void)SkI2cWrite(pAC, IoC, 0xffUL, LM80_ADDR, I2C_025K_DEV, LM80_IMSK_1, 0);
+	
+	(void)SkI2cWrite(pAC, IoC, 0xffUL, LM80_ADDR, I2C_025K_DEV, LM80_IMSK_2, 0);
+	
+	(void)SkI2cWrite(pAC, IoC, 0, LM80_ADDR, I2C_025K_DEV, LM80_FAN_CTRL, 0);
+	
+	(void)SkI2cWrite(pAC, IoC, 0, LM80_ADDR, I2C_025K_DEV, LM80_TEMP_CTRL, 0);
+	
+	(void)SkI2cWrite(pAC, IoC, (SK_U32)LM80_CFG_START, LM80_ADDR, I2C_025K_DEV,
+		LM80_CFG, 0);
+	
+	/*
+	 * MaxSens has to be updated here, because PhyType is not
+	 * set when performing Init Level 0
+	 */
+    pAC->I2c.MaxSens = 5;
+	
+	pPrt = &pAC->GIni.GP[0];
+	
+	if (pAC->GIni.GIGenesis) {
+		if (pPrt->PhyType == SK_PHY_BCOM) {
+			if (pAC->GIni.GIMacsFound == 1) {
+				pAC->I2c.MaxSens += 1;
+			}
+			else {
+				pAC->I2c.MaxSens += 3;
+			}
+		}
+	}
+	else {
+		pAC->I2c.MaxSens += 3;
+	}
+	
+	for (i = 0; i < pAC->I2c.MaxSens; i++) {
+		switch (i) {
+		case 0:
+			pAC->I2c.SenTable[i].SenDesc = "Temperature";
+			pAC->I2c.SenTable[i].SenType = SK_SEN_TEMP;
+			pAC->I2c.SenTable[i].SenThreErrHigh = SK_SEN_TEMP_HIGH_ERR;
+			pAC->I2c.SenTable[i].SenThreWarnHigh = SK_SEN_TEMP_HIGH_WARN;
+			pAC->I2c.SenTable[i].SenThreWarnLow = SK_SEN_TEMP_LOW_WARN;
+			pAC->I2c.SenTable[i].SenThreErrLow = SK_SEN_TEMP_LOW_ERR;
+			pAC->I2c.SenTable[i].SenReg = LM80_TEMP_IN;
+			break;
+		case 1:
+			pAC->I2c.SenTable[i].SenDesc = "Voltage PCI";
+			pAC->I2c.SenTable[i].SenType = SK_SEN_VOLT;
+			pAC->I2c.SenTable[i].SenThreErrHigh = SK_SEN_PCI_5V_HIGH_ERR;
+			pAC->I2c.SenTable[i].SenThreWarnHigh = SK_SEN_PCI_5V_HIGH_WARN;
+			pAC->I2c.SenTable[i].SenThreWarnLow = SK_SEN_PCI_5V_LOW_WARN;
+			pAC->I2c.SenTable[i].SenThreErrLow = SK_SEN_PCI_5V_LOW_ERR;
+			pAC->I2c.SenTable[i].SenReg = LM80_VT0_IN;
+			break;
+		case 2:
+			pAC->I2c.SenTable[i].SenDesc = "Voltage PCI-IO";
+			pAC->I2c.SenTable[i].SenType = SK_SEN_VOLT;
+			pAC->I2c.SenTable[i].SenThreErrHigh = SK_SEN_PCI_IO_5V_HIGH_ERR;
+			pAC->I2c.SenTable[i].SenThreWarnHigh = SK_SEN_PCI_IO_5V_HIGH_WARN;
+			pAC->I2c.SenTable[i].SenThreWarnLow = SK_SEN_PCI_IO_3V3_LOW_WARN;
+			pAC->I2c.SenTable[i].SenThreErrLow = SK_SEN_PCI_IO_3V3_LOW_ERR;
+			pAC->I2c.SenTable[i].SenReg = LM80_VT1_IN;
+			pAC->I2c.SenTable[i].SenInit = SK_SEN_DYN_INIT_PCI_IO;
+			break;
+		case 3:
+			pAC->I2c.SenTable[i].SenDesc = "Voltage ASIC";
+			pAC->I2c.SenTable[i].SenType = SK_SEN_VOLT;
+			pAC->I2c.SenTable[i].SenThreErrHigh = SK_SEN_VDD_HIGH_ERR;
+			pAC->I2c.SenTable[i].SenThreWarnHigh = SK_SEN_VDD_HIGH_WARN;
+			pAC->I2c.SenTable[i].SenThreWarnLow = SK_SEN_VDD_LOW_WARN;
+			pAC->I2c.SenTable[i].SenThreErrLow = SK_SEN_VDD_LOW_ERR;
+			pAC->I2c.SenTable[i].SenReg = LM80_VT2_IN;
+			break;
+		case 4:
+			if (pAC->GIni.GIGenesis) {
+				if (pPrt->PhyType == SK_PHY_BCOM) {
+					pAC->I2c.SenTable[i].SenDesc = "Voltage PHY A PLL";
+					pAC->I2c.SenTable[i].SenThreErrHigh = SK_SEN_PLL_3V3_HIGH_ERR;
+					pAC->I2c.SenTable[i].SenThreWarnHigh = SK_SEN_PLL_3V3_HIGH_WARN;
+					pAC->I2c.SenTable[i].SenThreWarnLow = SK_SEN_PLL_3V3_LOW_WARN;
+					pAC->I2c.SenTable[i].SenThreErrLow = SK_SEN_PLL_3V3_LOW_ERR;
+				}
+				else {
+					pAC->I2c.SenTable[i].SenDesc = "Voltage PMA";
+					pAC->I2c.SenTable[i].SenThreErrHigh = SK_SEN_PLL_3V3_HIGH_ERR;
+					pAC->I2c.SenTable[i].SenThreWarnHigh = SK_SEN_PLL_3V3_HIGH_WARN;
+					pAC->I2c.SenTable[i].SenThreWarnLow = SK_SEN_PLL_3V3_LOW_WARN;
+					pAC->I2c.SenTable[i].SenThreErrLow = SK_SEN_PLL_3V3_LOW_ERR;
+				}
+			}
+			else {
+				pAC->I2c.SenTable[i].SenDesc = "Voltage VAUX";
+				pAC->I2c.SenTable[i].SenThreErrHigh = SK_SEN_VAUX_3V3_HIGH_ERR;
+				pAC->I2c.SenTable[i].SenThreWarnHigh = SK_SEN_VAUX_3V3_HIGH_WARN;
+				if (pAC->GIni.GIVauxAvail) {
+					pAC->I2c.SenTable[i].SenThreWarnLow = SK_SEN_VAUX_3V3_LOW_WARN;
+					pAC->I2c.SenTable[i].SenThreErrLow = SK_SEN_VAUX_3V3_LOW_ERR;
+				}
+				else {
+					pAC->I2c.SenTable[i].SenThreErrLow = SK_SEN_VAUX_0V_WARN_ERR;
+					pAC->I2c.SenTable[i].SenThreWarnLow = SK_SEN_VAUX_0V_WARN_ERR;
+				}
+			}
+			pAC->I2c.SenTable[i].SenType = SK_SEN_VOLT;
+			pAC->I2c.SenTable[i].SenReg = LM80_VT3_IN;
+			break;
+		case 5:
+			if (pAC->GIni.GIGenesis) {
+				pAC->I2c.SenTable[i].SenDesc = "Voltage PHY 2V5";
+				pAC->I2c.SenTable[i].SenThreErrHigh = SK_SEN_PHY_2V5_HIGH_ERR;
+				pAC->I2c.SenTable[i].SenThreWarnHigh = SK_SEN_PHY_2V5_HIGH_WARN;
+				pAC->I2c.SenTable[i].SenThreWarnLow = SK_SEN_PHY_2V5_LOW_WARN;
+				pAC->I2c.SenTable[i].SenThreErrLow = SK_SEN_PHY_2V5_LOW_ERR;
+			}
+			else {
+				pAC->I2c.SenTable[i].SenDesc = "Voltage Core 1V5";
+				pAC->I2c.SenTable[i].SenThreErrHigh = SK_SEN_CORE_1V5_HIGH_ERR;
+				pAC->I2c.SenTable[i].SenThreWarnHigh = SK_SEN_CORE_1V5_HIGH_WARN;
+				pAC->I2c.SenTable[i].SenThreWarnLow = SK_SEN_CORE_1V5_LOW_WARN;
+				pAC->I2c.SenTable[i].SenThreErrLow = SK_SEN_CORE_1V5_LOW_ERR;
+			}
+			pAC->I2c.SenTable[i].SenType = SK_SEN_VOLT;
+			pAC->I2c.SenTable[i].SenReg = LM80_VT4_IN;
+			break;
+		case 6:
+			if (pAC->GIni.GIGenesis) {
+				pAC->I2c.SenTable[i].SenDesc = "Voltage PHY B PLL";
+			}
+			else {
+				pAC->I2c.SenTable[i].SenDesc = "Voltage PHY 3V3";
+			}
+			pAC->I2c.SenTable[i].SenType = SK_SEN_VOLT;
+			pAC->I2c.SenTable[i].SenThreErrHigh = SK_SEN_PLL_3V3_HIGH_ERR;
+			pAC->I2c.SenTable[i].SenThreWarnHigh = SK_SEN_PLL_3V3_HIGH_WARN;
+			pAC->I2c.SenTable[i].SenThreWarnLow = SK_SEN_PLL_3V3_LOW_WARN;
+			pAC->I2c.SenTable[i].SenThreErrLow = SK_SEN_PLL_3V3_LOW_ERR;
+			pAC->I2c.SenTable[i].SenReg = LM80_VT5_IN;
+			break;
+		case 7:
+			if (pAC->GIni.GIGenesis) {
+				pAC->I2c.SenTable[i].SenDesc = "Speed Fan";
+				pAC->I2c.SenTable[i].SenType = SK_SEN_FAN;
+				pAC->I2c.SenTable[i].SenThreErrHigh = SK_SEN_FAN_HIGH_ERR;
+				pAC->I2c.SenTable[i].SenThreWarnHigh = SK_SEN_FAN_HIGH_WARN;
+				pAC->I2c.SenTable[i].SenThreWarnLow = SK_SEN_FAN_LOW_WARN;
+				pAC->I2c.SenTable[i].SenThreErrLow = SK_SEN_FAN_LOW_ERR;
+				pAC->I2c.SenTable[i].SenReg = LM80_FAN2_IN;
+			}
+			else {
+				pAC->I2c.SenTable[i].SenDesc = "Voltage PHY 2V5";
+				pAC->I2c.SenTable[i].SenType = SK_SEN_VOLT;
+				pAC->I2c.SenTable[i].SenThreErrHigh = SK_SEN_PHY_2V5_HIGH_ERR;
+				pAC->I2c.SenTable[i].SenThreWarnHigh = SK_SEN_PHY_2V5_HIGH_WARN;
+				pAC->I2c.SenTable[i].SenThreWarnLow = SK_SEN_PHY_2V5_LOW_WARN;
+				pAC->I2c.SenTable[i].SenThreErrLow = SK_SEN_PHY_2V5_LOW_ERR;
+				pAC->I2c.SenTable[i].SenReg = LM80_VT6_IN;
+			}
+			break;
+		default:
+			SK_ERR_LOG(pAC, SK_ERRCL_INIT | SK_ERRCL_SW,
+				SKERR_I2C_E001, SKERR_I2C_E001MSG);
+			break;
+		}
+
+		pAC->I2c.SenTable[i].SenValue = 0;
+		pAC->I2c.SenTable[i].SenErrFlag = SK_SEN_ERR_OK;
+		pAC->I2c.SenTable[i].SenErrCts = 0;
+		pAC->I2c.SenTable[i].SenBegErrTS = 0;
+		pAC->I2c.SenTable[i].SenState = SK_SEN_IDLE;
+		pAC->I2c.SenTable[i].SenRead = SkLm80ReadSensor;
+		pAC->I2c.SenTable[i].SenDev = LM80_ADDR;
+	}
+
+#ifndef SK_DIAG
+	pAC->I2c.DummyReads = pAC->I2c.MaxSens;
+#endif /* !SK_DIAG */
+	
+	/* Clear I2C IRQ */
+	SK_OUT32(IoC, B2_I2C_IRQ, I2C_CLR_IRQ);
+	
+	/* Now we are I/O initialized */
+	pAC->I2c.InitLevel = SK_INIT_IO;
+	return(0);
+}	/* SkI2cInit1 */
+
+
+/*
+ * Init level 2: Start first sensor read.
+ */
+static int SkI2cInit2(
+SK_AC	*pAC,	/* Adapter Context */
+SK_IOC	IoC)	/* I/O Context */
+{
+	int		ReadComplete;
+	SK_SENSOR	*pSen;
+
+	if (pAC->I2c.InitLevel != SK_INIT_IO) {
+		/* ReInit not needed in I2C module */
+		/* Init0 and Init2 not permitted */
+		return(0);
+	}
+
+	pSen = &pAC->I2c.SenTable[pAC->I2c.CurrSens];
+	ReadComplete = SkI2cReadSensor(pAC, IoC, pSen);
+
+	if (ReadComplete) {
+		SK_ERR_LOG(pAC, SK_ERRCL_INIT, SKERR_I2C_E008, SKERR_I2C_E008MSG);
+	}
+
+	/* Now we are correctly initialized */
+	pAC->I2c.InitLevel = SK_INIT_RUN;
+
+	return(0);
+}	/* SkI2cInit2*/
+
+
+/*
+ * Initialize I2C devices
+ *
+ * Get the first voltage value and discard it.
+ * Go into temperature read mode. A default pointer is not set.
+ *
+ * The things to be done depend on the init level in the parameter list:
+ * Level 0:
+ *	Initialize only the data structures. Do NOT access hardware.
+ * Level 1:
+ *	Initialize hardware through SK_IN / SK_OUT commands. Do NOT use interrupts.
+ * Level 2:
+ *	Everything is possible. Interrupts may be used from now on.
+ *
+ * return:
+ *	0 = success
+ *	other = error.
+ */
+int	SkI2cInit(
+SK_AC	*pAC,	/* Adapter Context */
+SK_IOC	IoC,	/* I/O Context needed in levels 1 and 2 */
+int		Level)	/* Init Level */
+{
+
+	switch (Level) {
+	case SK_INIT_DATA:
+		return(SkI2cInit0(pAC));
+	case SK_INIT_IO:
+		return(SkI2cInit1(pAC, IoC));
+	case SK_INIT_RUN:
+		return(SkI2cInit2(pAC, IoC));
+	default:
+		break;
+	}
+
+	return(0);
+}	/* SkI2cInit */
+
+
+#ifndef SK_DIAG
+
+/*
+ * Interrupt service function for the I2C Interface
+ *
+ * Clears the Interrupt source
+ *
+ * Reads the register and check it for sending a trap.
+ *
+ * Starts the timer if necessary.
+ */
+void SkI2cIsr(
+SK_AC	*pAC,	/* Adapter Context */
+SK_IOC	IoC)	/* I/O Context */
+{
+	SK_EVPARA	Para;
+
+	/* Clear I2C IRQ */
+	SK_OUT32(IoC, B2_I2C_IRQ, I2C_CLR_IRQ);
+
+	Para.Para64 = 0;
+	SkEventQueue(pAC, SKGE_I2C, SK_I2CEV_IRQ, Para);
+}	/* SkI2cIsr */
+
+
+/*
+ * Check this sensors Value against the threshold and send events.
+ */
+static void SkI2cCheckSensor(
+SK_AC		*pAC,	/* Adapter Context */
+SK_SENSOR	*pSen)
+{
+	SK_EVPARA	ParaLocal;
+	SK_BOOL		TooHigh;	/* Is sensor too high? */
+	SK_BOOL		TooLow;		/* Is sensor too low? */
+	SK_U64		CurrTime;	/* Current Time */
+	SK_BOOL		DoTrapSend;	/* We need to send a trap */
+	SK_BOOL		DoErrLog;	/* We need to log the error */
+	SK_BOOL		IsError;	/* We need to log the error */
+
+	/* Check Dummy Reads first */
+	if (pAC->I2c.DummyReads > 0) {
+		pAC->I2c.DummyReads--;
+		return;
+	}
+
+	/* Get the current time */
+	CurrTime = SkOsGetTime(pAC);
+
+	/* Set para to the most useful setting: The current sensor. */
+	ParaLocal.Para64 = (SK_U64)pAC->I2c.CurrSens;
+
+	/* Check the Value against the thresholds. First: Error Thresholds */
+	TooHigh = (pSen->SenValue > pSen->SenThreErrHigh);
+	TooLow = (pSen->SenValue < pSen->SenThreErrLow);
+		
+	IsError = SK_FALSE;
+	if (TooHigh || TooLow) {
+		/* Error condition is satisfied */
+		DoTrapSend = SK_TRUE;
+		DoErrLog = SK_TRUE;
+
+		/* Now error condition is satisfied */
+		IsError = SK_TRUE;
+
+		if (pSen->SenErrFlag == SK_SEN_ERR_ERR) {
+			/* This state is the former one */
+
+			/* So check first whether we have to send a trap */
+			if (pSen->SenLastErrTrapTS + SK_SEN_ERR_TR_HOLD >
+			    CurrTime) {
+				/*
+				 * Do NOT send the Trap. The hold back time
+				 * has to run out first.
+				 */
+				DoTrapSend = SK_FALSE;
+			}
+
+			/* Check now whether we have to log an Error */
+			if (pSen->SenLastErrLogTS + SK_SEN_ERR_LOG_HOLD >
+			    CurrTime) {
+				/*
+				 * Do NOT log the error. The hold back time
+				 * has to run out first.
+				 */
+				DoErrLog = SK_FALSE;
+			}
+		}
+		else {
+			/* We came from a different state -> Set Begin Time Stamp */
+			pSen->SenBegErrTS = CurrTime;
+			pSen->SenErrFlag = SK_SEN_ERR_ERR;
+		}
+
+		if (DoTrapSend) {
+			/* Set current Time */
+			pSen->SenLastErrTrapTS = CurrTime;
+			pSen->SenErrCts++;
+
+			/* Queue PNMI Event */
+			SkEventQueue(pAC, SKGE_PNMI, (TooHigh ?
+				SK_PNMI_EVT_SEN_ERR_UPP :
+				SK_PNMI_EVT_SEN_ERR_LOW),
+				ParaLocal);
+		}
+
+		if (DoErrLog) {
+			/* Set current Time */
+			pSen->SenLastErrLogTS = CurrTime;
+
+			if (pSen->SenType == SK_SEN_TEMP) {
+				SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_I2C_E011, SKERR_I2C_E011MSG);
+			}
+			else if (pSen->SenType == SK_SEN_VOLT) {
+				SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_I2C_E012, SKERR_I2C_E012MSG);
+			}
+			else {
+				SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_I2C_E015, SKERR_I2C_E015MSG);
+			}
+		}
+	}
+
+	/* Check the Value against the thresholds */
+	/* 2nd: Warning thresholds */
+	TooHigh = (pSen->SenValue > pSen->SenThreWarnHigh);
+	TooLow = (pSen->SenValue < pSen->SenThreWarnLow);
+		
+	if (!IsError && (TooHigh || TooLow)) {
+		/* Error condition is satisfied */
+		DoTrapSend = SK_TRUE;
+		DoErrLog = SK_TRUE;
+
+		if (pSen->SenErrFlag == SK_SEN_ERR_WARN) {
+			/* This state is the former one */
+
+			/* So check first whether we have to send a trap */
+			if (pSen->SenLastWarnTrapTS + SK_SEN_WARN_TR_HOLD > CurrTime) {
+				/*
+				 * Do NOT send the Trap. The hold back time
+				 * has to run out first.
+				 */
+				DoTrapSend = SK_FALSE;
+			}
+
+			/* Check now whether we have to log an Error */
+			if (pSen->SenLastWarnLogTS + SK_SEN_WARN_LOG_HOLD > CurrTime) {
+				/*
+				 * Do NOT log the error. The hold back time
+				 * has to run out first.
+				 */
+				DoErrLog = SK_FALSE;
+			}
+		}
+		else {
+			/* We came from a different state -> Set Begin Time Stamp */
+			pSen->SenBegWarnTS = CurrTime;
+			pSen->SenErrFlag = SK_SEN_ERR_WARN;
+		}
+
+		if (DoTrapSend) {
+			/* Set current Time */
+			pSen->SenLastWarnTrapTS = CurrTime;
+			pSen->SenWarnCts++;
+
+			/* Queue PNMI Event */
+			SkEventQueue(pAC, SKGE_PNMI, (TooHigh ?
+				SK_PNMI_EVT_SEN_WAR_UPP :
+				SK_PNMI_EVT_SEN_WAR_LOW),
+				ParaLocal);
+		}
+
+		if (DoErrLog) {
+			/* Set current Time */
+			pSen->SenLastWarnLogTS = CurrTime;
+
+			if (pSen->SenType == SK_SEN_TEMP) {
+				SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_I2C_E009, SKERR_I2C_E009MSG);
+			}
+			else if (pSen->SenType == SK_SEN_VOLT) {
+				SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_I2C_E010, SKERR_I2C_E010MSG);
+			}
+			else {
+				SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_I2C_E014, SKERR_I2C_E014MSG);
+			}
+		}
+	}
+
+	/* Check for NO error at all */
+	if (!IsError && !TooHigh && !TooLow) {
+		/* Set o.k. Status if no error and no warning condition */
+		pSen->SenErrFlag = SK_SEN_ERR_OK;
+	}
+
+	/* End of check against the thresholds */
+
+	/* Bug fix AF: 16.Aug.2001: Correct the init base
+	 * of LM80 sensor.
+	 */
+	if (pSen->SenInit == SK_SEN_DYN_INIT_PCI_IO) {
+
+        pSen->SenInit = SK_SEN_DYN_INIT_NONE;
+
+		if (pSen->SenValue > SK_SEN_PCI_IO_RANGE_LIMITER) {
+			/* 5V PCI-IO Voltage */
+			pSen->SenThreWarnLow = SK_SEN_PCI_IO_5V_LOW_WARN;
+			pSen->SenThreErrLow = SK_SEN_PCI_IO_5V_LOW_ERR;
+		}
+		else {
+			/* 3.3V PCI-IO Voltage */
+			pSen->SenThreWarnHigh = SK_SEN_PCI_IO_3V3_HIGH_WARN;
+			pSen->SenThreErrHigh = SK_SEN_PCI_IO_3V3_HIGH_ERR;
+		}
+	}
+	
+#ifdef TEST_ONLY
+    /* Dynamic thresholds also for VAUX of LM80 sensor */
+	if (pSen->SenInit == SK_SEN_DYN_INIT_VAUX) {
+
+        pSen->SenInit = SK_SEN_DYN_INIT_NONE;
+
+		/* 3.3V VAUX Voltage */
+		if (pSen->SenValue > SK_SEN_VAUX_RANGE_LIMITER) {
+			pSen->SenThreWarnLow = SK_SEN_VAUX_3V3_LOW_WARN;
+			pSen->SenThreErrLow = SK_SEN_VAUX_3V3_LOW_ERR;
+		}
+		/* 0V VAUX Voltage */
+		else {
+			pSen->SenThreWarnHigh = SK_SEN_VAUX_0V_WARN_ERR;
+			pSen->SenThreErrHigh = SK_SEN_VAUX_0V_WARN_ERR;
+		}
+	}
+
+	/*
+	 * Check initialization state:
+	 * The VIO Thresholds need adaption
+	 */
+	if (!pSen->SenInit && pSen->SenReg == LM80_VT1_IN &&
+	     pSen->SenValue > SK_SEN_WARNLOW2C &&
+	     pSen->SenValue < SK_SEN_WARNHIGH2) {
+		pSen->SenThreErrLow = SK_SEN_ERRLOW2C;
+		pSen->SenThreWarnLow = SK_SEN_WARNLOW2C;
+		pSen->SenInit = SK_TRUE;
+	}
+
+	if (!pSen->SenInit && pSen->SenReg == LM80_VT1_IN &&
+	     pSen->SenValue > SK_SEN_WARNLOW2 &&
+	     pSen->SenValue < SK_SEN_WARNHIGH2C) {
+		pSen->SenThreErrHigh = SK_SEN_ERRHIGH2C;
+		pSen->SenThreWarnHigh = SK_SEN_WARNHIGH2C;
+		pSen->SenInit = SK_TRUE;
+	}
+#endif
+
+	if (pSen->SenInit != SK_SEN_DYN_INIT_NONE) {
+		SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_I2C_E013, SKERR_I2C_E013MSG);
+	}
+}	/* SkI2cCheckSensor */
+
+
+/*
+ * The only Event to be served is the timeout event
+ *
+ */
+int	SkI2cEvent(
+SK_AC		*pAC,	/* Adapter Context */
+SK_IOC		IoC,	/* I/O Context */
+SK_U32		Event,	/* Module specific Event */
+SK_EVPARA	Para)	/* Event specific Parameter */
+{
+	int			ReadComplete;
+	SK_SENSOR	*pSen;
+	SK_U32		Time;
+	SK_EVPARA	ParaLocal;
+	int			i;
+
+	/* New case: no sensors */
+	if (pAC->I2c.MaxSens == 0) {
+		return(0);
+	}
+
+	switch (Event) {
+	case SK_I2CEV_IRQ:
+		pSen = &pAC->I2c.SenTable[pAC->I2c.CurrSens];
+		ReadComplete = SkI2cReadSensor(pAC, IoC, pSen);
+
+		if (ReadComplete) {
+			/* Check sensor against defined thresholds */
+			SkI2cCheckSensor(pAC, pSen);
+
+			/* Increment Current sensor and set appropriate Timeout */
+			pAC->I2c.CurrSens++;
+			if (pAC->I2c.CurrSens >= pAC->I2c.MaxSens) {
+				pAC->I2c.CurrSens = 0;
+				Time = SK_I2C_TIM_LONG;
+			}
+			else {
+				Time = SK_I2C_TIM_SHORT;
+			}
+
+			/* Start Timer */
+			ParaLocal.Para64 = (SK_U64)0;
+
+			pAC->I2c.TimerMode = SK_TIMER_NEW_GAUGING;
+			
+			SkTimerStart(pAC, IoC, &pAC->I2c.SenTimer, Time,
+				SKGE_I2C, SK_I2CEV_TIM, ParaLocal);
+		}
+        else {
+			/* Start Timer */
+			ParaLocal.Para64 = (SK_U64)0;
+
+			pAC->I2c.TimerMode = SK_TIMER_WATCH_SM;
+
+            SkTimerStart(pAC, IoC, &pAC->I2c.SenTimer, SK_I2C_TIM_WATCH,
+				SKGE_I2C, SK_I2CEV_TIM, ParaLocal);
+		}
+		break;
+	case SK_I2CEV_TIM:
+		if (pAC->I2c.TimerMode == SK_TIMER_NEW_GAUGING) {
+
+			ParaLocal.Para64 = (SK_U64)0;
+			SkTimerStop(pAC, IoC, &pAC->I2c.SenTimer);
+
+			pSen = &pAC->I2c.SenTable[pAC->I2c.CurrSens];
+			ReadComplete = SkI2cReadSensor(pAC, IoC, pSen);
+
+			if (ReadComplete) {
+				/* Check sensor against defined thresholds */
+				SkI2cCheckSensor(pAC, pSen);
+
+				/* Increment Current sensor and set appropriate Timeout */
+				pAC->I2c.CurrSens++;
+				if (pAC->I2c.CurrSens == pAC->I2c.MaxSens) {
+					pAC->I2c.CurrSens = 0;
+					Time = SK_I2C_TIM_LONG;
+				}
+				else {
+					Time = SK_I2C_TIM_SHORT;
+				}
+
+				/* Start Timer */
+				ParaLocal.Para64 = (SK_U64)0;
+
+				pAC->I2c.TimerMode = SK_TIMER_NEW_GAUGING;
+
+				SkTimerStart(pAC, IoC, &pAC->I2c.SenTimer, Time,
+					SKGE_I2C, SK_I2CEV_TIM, ParaLocal);
+			}
+		}
+		else {
+			pSen = &pAC->I2c.SenTable[pAC->I2c.CurrSens];
+			pSen->SenErrFlag = SK_SEN_ERR_FAULTY;
+			SK_I2C_STOP(IoC);
+
+			/* Increment Current sensor and set appropriate Timeout */
+			pAC->I2c.CurrSens++;
+			if (pAC->I2c.CurrSens == pAC->I2c.MaxSens) {
+				pAC->I2c.CurrSens = 0;
+				Time = SK_I2C_TIM_LONG;
+			}
+			else {
+				Time = SK_I2C_TIM_SHORT;
+			}
+
+			/* Start Timer */
+			ParaLocal.Para64 = (SK_U64)0;
+
+			pAC->I2c.TimerMode = SK_TIMER_NEW_GAUGING;
+
+			SkTimerStart(pAC, IoC, &pAC->I2c.SenTimer, Time,
+				SKGE_I2C, SK_I2CEV_TIM, ParaLocal);
+		}
+		break;
+	case SK_I2CEV_CLEAR:
+		for (i = 0; i < SK_MAX_SENSORS; i++) {
+			pAC->I2c.SenTable[i].SenErrFlag = SK_SEN_ERR_OK;
+			pAC->I2c.SenTable[i].SenErrCts = 0;
+			pAC->I2c.SenTable[i].SenWarnCts = 0;
+			pAC->I2c.SenTable[i].SenBegErrTS = 0;
+			pAC->I2c.SenTable[i].SenBegWarnTS = 0;
+			pAC->I2c.SenTable[i].SenLastErrTrapTS = (SK_U64)0;
+			pAC->I2c.SenTable[i].SenLastErrLogTS = (SK_U64)0;
+			pAC->I2c.SenTable[i].SenLastWarnTrapTS = (SK_U64)0;
+			pAC->I2c.SenTable[i].SenLastWarnLogTS = (SK_U64)0;
+		}
+		break;
+	default:
+		SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_I2C_E006, SKERR_I2C_E006MSG);
+	}
+
+	return(0);
+}	/* SkI2cEvent*/
+
+#endif /* !SK_DIAG */
diff --git a/drivers/net/sk98lin/sklm80.c b/drivers/net/sk98lin/sklm80.c
new file mode 100644
index 0000000..a204f5b
--- /dev/null
+++ b/drivers/net/sk98lin/sklm80.c
@@ -0,0 +1,141 @@
+/******************************************************************************
+ *
+ * Name:	sklm80.c
+ * Project:	Gigabit Ethernet Adapters, TWSI-Module
+ * Version:	$Revision: 1.22 $
+ * Date:	$Date: 2003/10/20 09:08:21 $
+ * Purpose:	Functions to access Voltage and Temperature Sensor (LM80)
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *	(C)Copyright 1998-2002 SysKonnect.
+ *	(C)Copyright 2002-2003 Marvell.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/*
+	LM80 functions
+*/
+#if (defined(DEBUG) || ((!defined(LINT)) && (!defined(SK_SLIM))))
+static const char SysKonnectFileId[] =
+	"@(#) $Id: sklm80.c,v 1.22 2003/10/20 09:08:21 rschmidt Exp $ (C) Marvell. ";
+#endif
+
+#include "h/skdrv1st.h"		/* Driver Specific Definitions */
+#include "h/lm80.h"
+#include "h/skdrv2nd.h"		/* Adapter Control- and Driver specific Def. */
+
+#define	BREAK_OR_WAIT(pAC,IoC,Event)	break
+
+/*
+ * read a sensors value (LM80 specific)
+ *
+ * This function reads a sensors value from the I2C sensor chip LM80.
+ * The sensor is defined by its index into the sensors database in the struct
+ * pAC points to.
+ *
+ * Returns	1 if the read is completed
+ *		0 if the read must be continued (I2C Bus still allocated)
+ */
+int SkLm80ReadSensor(
+SK_AC		*pAC,	/* Adapter Context */
+SK_IOC		IoC,	/* I/O Context needed in level 1 and 2 */
+SK_SENSOR	*pSen)	/* Sensor to be read */
+{
+	SK_I32		Value;
+
+	switch (pSen->SenState) {
+	case SK_SEN_IDLE:
+		/* Send address to ADDR register */
+		SK_I2C_CTL(IoC, I2C_READ, pSen->SenDev, I2C_025K_DEV, pSen->SenReg, 0);
+
+		pSen->SenState = SK_SEN_VALUE ;
+		BREAK_OR_WAIT(pAC, IoC, I2C_READ);
+	
+	case SK_SEN_VALUE:
+		/* Read value from data register */
+		SK_IN32(IoC, B2_I2C_DATA, ((SK_U32 *)&Value));
+		
+		Value &= 0xff; /* only least significant byte is valid */
+
+		/* Do NOT check the Value against the thresholds */
+		/* Checking is done in the calling instance */
+
+		if (pSen->SenType == SK_SEN_VOLT) {
+			/* Voltage sensor */
+			pSen->SenValue = Value * SK_LM80_VT_LSB;
+			pSen->SenState = SK_SEN_IDLE ;
+			return(1);
+		}
+
+		if (pSen->SenType == SK_SEN_FAN) {
+			if (Value != 0 && Value != 0xff) {
+				/* Fan speed counter */
+				pSen->SenValue = SK_LM80_FAN_FAKTOR/Value;
+			}
+			else {
+				/* Indicate Fan error */
+				pSen->SenValue = 0;
+			}
+			pSen->SenState = SK_SEN_IDLE ;
+			return(1);
+		}
+
+		/* First: correct the value: it might be negative */
+		if ((Value & 0x80) != 0) {
+			/* Value is negative */
+			Value = Value - 256;
+		}
+
+		/* We have a temperature sensor and need to get the signed extension.
+		 * For now we get the extension from the last reading, so in the normal
+		 * case we won't see flickering temperatures.
+		 */
+		pSen->SenValue = (Value * SK_LM80_TEMP_LSB) +
+			(pSen->SenValue % SK_LM80_TEMP_LSB);
+
+		/* Send address to ADDR register */
+		SK_I2C_CTL(IoC, I2C_READ, pSen->SenDev, I2C_025K_DEV, LM80_TEMP_CTRL, 0);
+
+		pSen->SenState = SK_SEN_VALEXT ;
+		BREAK_OR_WAIT(pAC, IoC, I2C_READ);
+	
+	case SK_SEN_VALEXT:
+		/* Read value from data register */
+		SK_IN32(IoC, B2_I2C_DATA, ((SK_U32 *)&Value));
+		Value &= LM80_TEMP_LSB_9; /* only bit 7 is valid */
+
+		/* cut the LSB bit */
+		pSen->SenValue = ((pSen->SenValue / SK_LM80_TEMP_LSB) *
+			SK_LM80_TEMP_LSB);
+
+		if (pSen->SenValue < 0) {
+			/* Value negative: The bit value must be subtracted */
+			pSen->SenValue -= ((Value >> 7) * SK_LM80_TEMPEXT_LSB);
+		}
+		else {
+			/* Value positive: The bit value must be added */
+			pSen->SenValue += ((Value >> 7) * SK_LM80_TEMPEXT_LSB);
+		}
+
+		pSen->SenState = SK_SEN_IDLE ;
+		return(1);
+	
+	default:
+		SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_I2C_E007, SKERR_I2C_E007MSG);
+		return(1);
+	}
+
+	/* Not completed */
+	return(0);
+}
+
diff --git a/drivers/net/sk98lin/skqueue.c b/drivers/net/sk98lin/skqueue.c
new file mode 100644
index 0000000..0275b4f
--- /dev/null
+++ b/drivers/net/sk98lin/skqueue.c
@@ -0,0 +1,179 @@
+/******************************************************************************
+ *
+ * Name:	skqueue.c
+ * Project:	Gigabit Ethernet Adapters, Event Scheduler Module
+ * Version:	$Revision: 1.20 $
+ * Date:	$Date: 2003/09/16 13:44:00 $
+ * Purpose:	Management of an event queue.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *	(C)Copyright 1998-2002 SysKonnect GmbH.
+ *	(C)Copyright 2002-2003 Marvell.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+
+/*
+ *	Event queue and dispatcher
+ */
+#if (defined(DEBUG) || ((!defined(LINT)) && (!defined(SK_SLIM))))
+static const char SysKonnectFileId[] =
+	"@(#) $Id: skqueue.c,v 1.20 2003/09/16 13:44:00 rschmidt Exp $ (C) Marvell.";
+#endif
+
+#include "h/skdrv1st.h"		/* Driver Specific Definitions */
+#include "h/skqueue.h"		/* Queue Definitions */
+#include "h/skdrv2nd.h"		/* Adapter Control- and Driver specific Def. */
+
+#ifdef __C2MAN__
+/*
+	Event queue management.
+
+	General Description:
+
+ */
+intro()
+{}
+#endif
+
+#define PRINTF(a,b,c)
+
+/*
+ * init event queue management
+ *
+ * Must be called during init level 0.
+ */
+void	SkEventInit(
+SK_AC	*pAC,	/* Adapter context */
+SK_IOC	Ioc,	/* IO context */
+int		Level)	/* Init level */
+{
+	switch (Level) {
+	case SK_INIT_DATA:
+		pAC->Event.EvPut = pAC->Event.EvGet = pAC->Event.EvQueue;
+		break;
+	default:
+		break;
+	}
+}
+
+/*
+ * add event to queue
+ */
+void	SkEventQueue(
+SK_AC		*pAC,	/* Adapters context */
+SK_U32		Class,	/* Event Class */
+SK_U32		Event,	/* Event to be queued */
+SK_EVPARA	Para)	/* Event parameter */
+{
+	pAC->Event.EvPut->Class = Class;
+	pAC->Event.EvPut->Event = Event;
+	pAC->Event.EvPut->Para = Para;
+	
+	if (++pAC->Event.EvPut == &pAC->Event.EvQueue[SK_MAX_EVENT])
+		pAC->Event.EvPut = pAC->Event.EvQueue;
+
+	if (pAC->Event.EvPut == pAC->Event.EvGet) {
+		SK_ERR_LOG(pAC, SK_ERRCL_NORES, SKERR_Q_E001, SKERR_Q_E001MSG);
+	}
+}
+
+/*
+ * event dispatcher
+ *	while event queue is not empty
+ *		get event from queue
+ *		send command to state machine
+ *	end
+ *	return error reported by individual Event function
+ *		0 if no error occured.
+ */
+int	SkEventDispatcher(
+SK_AC	*pAC,	/* Adapters Context */
+SK_IOC	Ioc)	/* Io context */
+{
+	SK_EVENTELEM	*pEv;	/* pointer into queue */
+	SK_U32			Class;
+	int			Rtv;
+
+	pEv = pAC->Event.EvGet;
+	
+	PRINTF("dispatch get %x put %x\n", pEv, pAC->Event.ev_put);
+	
+	while (pEv != pAC->Event.EvPut) {
+		PRINTF("dispatch Class %d Event %d\n", pEv->Class, pEv->Event);
+
+		switch (Class = pEv->Class) {
+#ifndef SK_USE_LAC_EV
+#ifndef SK_SLIM
+		case SKGE_RLMT:		/* RLMT Event */
+			Rtv = SkRlmtEvent(pAC, Ioc, pEv->Event, pEv->Para);
+			break;
+		case SKGE_I2C:		/* I2C Event */
+			Rtv = SkI2cEvent(pAC, Ioc, pEv->Event, pEv->Para);
+			break;
+		case SKGE_PNMI:		/* PNMI Event */
+			Rtv = SkPnmiEvent(pAC, Ioc, pEv->Event, pEv->Para);
+			break;
+#endif	/* not SK_SLIM */
+#endif	/* not SK_USE_LAC_EV */
+		case SKGE_DRV:		/* Driver Event */
+			Rtv = SkDrvEvent(pAC, Ioc, pEv->Event, pEv->Para);
+			break;
+#ifndef SK_USE_SW_TIMER
+		case SKGE_HWAC:
+			Rtv = SkGeSirqEvent(pAC, Ioc, pEv->Event, pEv->Para);
+			break;
+#else /* !SK_USE_SW_TIMER */
+        case SKGE_SWT :
+			Rtv = SkSwtEvent(pAC, Ioc, pEv->Event, pEv->Para);
+			break;
+#endif /* !SK_USE_SW_TIMER */
+#ifdef SK_USE_LAC_EV
+		case SKGE_LACP :
+			Rtv = SkLacpEvent(pAC, Ioc, pEv->Event, pEv->Para);
+			break;
+		case SKGE_RSF :
+			Rtv = SkRsfEvent(pAC, Ioc, pEv->Event, pEv->Para);
+			break;
+		case SKGE_MARKER :
+			Rtv = SkMarkerEvent(pAC, Ioc, pEv->Event, pEv->Para);
+			break;
+		case SKGE_FD :
+			Rtv = SkFdEvent(pAC, Ioc, pEv->Event, pEv->Para);
+			break;
+#endif /* SK_USE_LAC_EV */
+#ifdef	SK_USE_CSUM
+		case SKGE_CSUM :
+			Rtv = SkCsEvent(pAC, Ioc, pEv->Event, pEv->Para);
+			break;
+#endif	/* SK_USE_CSUM */
+		default :
+			SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_Q_E002, SKERR_Q_E002MSG);
+			Rtv = 0;
+		}
+
+		if (Rtv != 0) {
+			return(Rtv);
+		}
+
+		if (++pEv == &pAC->Event.EvQueue[SK_MAX_EVENT])
+			pEv = pAC->Event.EvQueue;
+
+		/* Renew get: it is used in queue_events to detect overruns */
+		pAC->Event.EvGet = pEv;
+	}
+
+	return(0);
+}
+
+/* End of file */
diff --git a/drivers/net/sk98lin/skrlmt.c b/drivers/net/sk98lin/skrlmt.c
new file mode 100644
index 0000000..be8d1cc
--- /dev/null
+++ b/drivers/net/sk98lin/skrlmt.c
@@ -0,0 +1,3257 @@
+/******************************************************************************
+ *
+ * Name:	skrlmt.c
+ * Project:	GEnesis, PCI Gigabit Ethernet Adapter
+ * Version:	$Revision: 1.69 $
+ * Date:	$Date: 2003/04/15 09:39:22 $
+ * Purpose:	Manage links on SK-NET Adapters, esp. redundant ones.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *	(C)Copyright 1998-2002 SysKonnect GmbH.
+ *	(C)Copyright 2002-2003 Marvell.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * Description:
+ *
+ * This module contains code for Link ManagemenT (LMT) of SK-NET Adapters.
+ * It is mainly intended for adapters with more than one link.
+ * For such adapters, this module realizes Redundant Link ManagemenT (RLMT).
+ *
+ * Include File Hierarchy:
+ *
+ *	"skdrv1st.h"
+ *	"skdrv2nd.h"
+ *
+ ******************************************************************************/
+
+#ifndef	lint
+static const char SysKonnectFileId[] =
+	"@(#) $Id: skrlmt.c,v 1.69 2003/04/15 09:39:22 tschilli Exp $ (C) Marvell.";
+#endif	/* !defined(lint) */
+
+#define __SKRLMT_C
+
+#ifdef __cplusplus
+extern "C" {
+#endif	/* cplusplus */
+
+#include "h/skdrv1st.h"
+#include "h/skdrv2nd.h"
+
+/* defines ********************************************************************/
+
+#ifndef SK_HWAC_LINK_LED
+#define SK_HWAC_LINK_LED(a,b,c,d)
+#endif	/* !defined(SK_HWAC_LINK_LED) */
+
+#ifndef DEBUG
+#define RLMT_STATIC	static
+#else	/* DEBUG */
+#define RLMT_STATIC
+
+#ifndef SK_LITTLE_ENDIAN
+/* First 32 bits */
+#define OFFS_LO32	1
+
+/* Second 32 bits */
+#define OFFS_HI32	0
+#else	/* SK_LITTLE_ENDIAN */
+/* First 32 bits */
+#define OFFS_LO32	0
+
+/* Second 32 bits */
+#define OFFS_HI32	1
+#endif	/* SK_LITTLE_ENDIAN */
+
+#endif	/* DEBUG */
+
+/* ----- Private timeout values ----- */
+
+#define SK_RLMT_MIN_TO_VAL			   125000	/* 1/8 sec. */
+#define SK_RLMT_DEF_TO_VAL			  1000000	/* 1 sec. */
+#define SK_RLMT_PORTDOWN_TIM_VAL	   900000	/* another 0.9 sec. */
+#define SK_RLMT_PORTSTART_TIM_VAL	   100000	/* 0.1 sec. */
+#define SK_RLMT_PORTUP_TIM_VAL		  2500000	/* 2.5 sec. */
+#define SK_RLMT_SEG_TO_VAL			900000000	/* 15 min. */
+
+/* Assume tick counter increment is 1 - may be set OS-dependent. */
+#ifndef SK_TICK_INCR
+#define SK_TICK_INCR	SK_CONSTU64(1)
+#endif	/* !defined(SK_TICK_INCR) */
+
+/*
+ * Amount that a time stamp must be later to be recognized as "substantially
+ * later". This is about 1/128 sec, but above 1 tick counter increment.
+ */
+#define SK_RLMT_BC_DELTA		(1 + ((SK_TICKS_PER_SEC >> 7) > SK_TICK_INCR ? \
+									(SK_TICKS_PER_SEC >> 7) : SK_TICK_INCR))
+
+/* ----- Private RLMT defaults ----- */
+
+#define SK_RLMT_DEF_PREF_PORT	0					/* "Lower" port. */
+#define SK_RLMT_DEF_MODE 		SK_RLMT_CHECK_LINK	/* Default RLMT Mode. */
+
+/* ----- Private RLMT checking states ----- */
+
+#define SK_RLMT_RCS_SEG			1		/* RLMT Check State: check seg. */
+#define SK_RLMT_RCS_START_SEG	2		/* RLMT Check State: start check seg. */
+#define SK_RLMT_RCS_SEND_SEG	4		/* RLMT Check State: send BPDU packet */
+#define SK_RLMT_RCS_REPORT_SEG	8		/* RLMT Check State: report seg. */
+
+/* ----- Private PORT checking states ----- */
+
+#define SK_RLMT_PCS_TX			1		/* Port Check State: check tx. */
+#define SK_RLMT_PCS_RX			2		/* Port Check State: check rx. */
+
+/* ----- Private PORT events ----- */
+
+/* Note: Update simulation when changing these. */
+#define SK_RLMT_PORTSTART_TIM	1100	/* Port start timeout. */
+#define SK_RLMT_PORTUP_TIM		1101	/* Port can now go up. */
+#define SK_RLMT_PORTDOWN_RX_TIM	1102	/* Port did not receive once ... */
+#define SK_RLMT_PORTDOWN		1103	/* Port went down. */
+#define SK_RLMT_PORTDOWN_TX_TIM	1104	/* Partner did not receive ... */
+
+/* ----- Private RLMT events ----- */
+
+/* Note: Update simulation when changing these. */
+#define SK_RLMT_TIM				2100	/* RLMT timeout. */
+#define SK_RLMT_SEG_TIM			2101	/* RLMT segmentation check timeout. */
+
+#define TO_SHORTEN(tim)	((tim) / 2)
+
+/* Error numbers and messages. */
+#define SKERR_RLMT_E001		(SK_ERRBASE_RLMT + 0)
+#define SKERR_RLMT_E001_MSG	"No Packet."
+#define SKERR_RLMT_E002		(SKERR_RLMT_E001 + 1)
+#define SKERR_RLMT_E002_MSG	"Short Packet."
+#define SKERR_RLMT_E003		(SKERR_RLMT_E002 + 1)
+#define SKERR_RLMT_E003_MSG	"Unknown RLMT event."
+#define SKERR_RLMT_E004		(SKERR_RLMT_E003 + 1)
+#define SKERR_RLMT_E004_MSG	"PortsUp incorrect."
+#define SKERR_RLMT_E005		(SKERR_RLMT_E004 + 1)
+#define SKERR_RLMT_E005_MSG	\
+ "Net seems to be segmented (different root bridges are reported on the ports)."
+#define SKERR_RLMT_E006		(SKERR_RLMT_E005 + 1)
+#define SKERR_RLMT_E006_MSG	"Duplicate MAC Address detected."
+#define SKERR_RLMT_E007		(SKERR_RLMT_E006 + 1)
+#define SKERR_RLMT_E007_MSG	"LinksUp incorrect."
+#define SKERR_RLMT_E008		(SKERR_RLMT_E007 + 1)
+#define SKERR_RLMT_E008_MSG	"Port not started but link came up."
+#define SKERR_RLMT_E009		(SKERR_RLMT_E008 + 1)
+#define SKERR_RLMT_E009_MSG	"Corrected illegal setting of Preferred Port."
+#define SKERR_RLMT_E010		(SKERR_RLMT_E009 + 1)
+#define SKERR_RLMT_E010_MSG	"Ignored illegal Preferred Port."
+
+/* LLC field values. */
+#define LLC_COMMAND_RESPONSE_BIT		1
+#define LLC_TEST_COMMAND				0xE3
+#define LLC_UI							0x03
+
+/* RLMT Packet fields. */
+#define	SK_RLMT_DSAP					0
+#define	SK_RLMT_SSAP					0
+#define SK_RLMT_CTRL					(LLC_TEST_COMMAND)
+#define SK_RLMT_INDICATOR0				0x53	/* S */
+#define SK_RLMT_INDICATOR1				0x4B	/* K */
+#define SK_RLMT_INDICATOR2				0x2D	/* - */
+#define SK_RLMT_INDICATOR3				0x52	/* R */
+#define SK_RLMT_INDICATOR4				0x4C	/* L */
+#define SK_RLMT_INDICATOR5				0x4D	/* M */
+#define SK_RLMT_INDICATOR6				0x54	/* T */
+#define SK_RLMT_PACKET_VERSION			0
+
+/* RLMT SPT Flag values. */
+#define	SK_RLMT_SPT_FLAG_CHANGE			0x01
+#define	SK_RLMT_SPT_FLAG_CHANGE_ACK		0x80
+
+/* RLMT SPT Packet fields. */
+#define	SK_RLMT_SPT_DSAP				0x42
+#define	SK_RLMT_SPT_SSAP				0x42
+#define SK_RLMT_SPT_CTRL				(LLC_UI)
+#define	SK_RLMT_SPT_PROTOCOL_ID0		0x00
+#define	SK_RLMT_SPT_PROTOCOL_ID1		0x00
+#define	SK_RLMT_SPT_PROTOCOL_VERSION_ID	0x00
+#define	SK_RLMT_SPT_BPDU_TYPE			0x00
+#define	SK_RLMT_SPT_FLAGS				0x00	/* ?? */
+#define	SK_RLMT_SPT_ROOT_ID0			0xFF	/* Lowest possible priority. */
+#define	SK_RLMT_SPT_ROOT_ID1			0xFF	/* Lowest possible priority. */
+
+/* Remaining 6 bytes will be the current port address. */
+#define	SK_RLMT_SPT_ROOT_PATH_COST0		0x00
+#define	SK_RLMT_SPT_ROOT_PATH_COST1		0x00
+#define	SK_RLMT_SPT_ROOT_PATH_COST2		0x00
+#define	SK_RLMT_SPT_ROOT_PATH_COST3		0x00
+#define	SK_RLMT_SPT_BRIDGE_ID0			0xFF	/* Lowest possible priority. */
+#define	SK_RLMT_SPT_BRIDGE_ID1			0xFF	/* Lowest possible priority. */
+
+/* Remaining 6 bytes will be the current port address. */
+#define	SK_RLMT_SPT_PORT_ID0			0xFF	/* Lowest possible priority. */
+#define	SK_RLMT_SPT_PORT_ID1			0xFF	/* Lowest possible priority. */
+#define	SK_RLMT_SPT_MSG_AGE0			0x00
+#define	SK_RLMT_SPT_MSG_AGE1			0x00
+#define	SK_RLMT_SPT_MAX_AGE0			0x00
+#define	SK_RLMT_SPT_MAX_AGE1			0xFF
+#define	SK_RLMT_SPT_HELLO_TIME0			0x00
+#define	SK_RLMT_SPT_HELLO_TIME1			0xFF
+#define	SK_RLMT_SPT_FWD_DELAY0			0x00
+#define	SK_RLMT_SPT_FWD_DELAY1			0x40
+
+/* Size defines. */
+#define SK_RLMT_MIN_PACKET_SIZE			34
+#define SK_RLMT_MAX_PACKET_SIZE			(SK_RLMT_MAX_TX_BUF_SIZE)
+#define SK_PACKET_DATA_LEN				(SK_RLMT_MAX_PACKET_SIZE - \
+										SK_RLMT_MIN_PACKET_SIZE)
+
+/* ----- RLMT packet types ----- */
+#define SK_PACKET_ANNOUNCE				1	/* Port announcement. */
+#define SK_PACKET_ALIVE					2	/* Alive packet to port. */
+#define SK_PACKET_ADDR_CHANGED			3	/* Port address changed. */
+#define SK_PACKET_CHECK_TX				4	/* Check your tx line. */
+
+#ifdef SK_LITTLE_ENDIAN
+#define SK_U16_TO_NETWORK_ORDER(Val,Addr) { \
+	SK_U8	*_Addr = (SK_U8*)(Addr); \
+	SK_U16	_Val = (SK_U16)(Val); \
+	*_Addr++ = (SK_U8)(_Val >> 8); \
+	*_Addr = (SK_U8)(_Val & 0xFF); \
+}
+#endif	/* SK_LITTLE_ENDIAN */
+
+#ifdef SK_BIG_ENDIAN
+#define SK_U16_TO_NETWORK_ORDER(Val,Addr) (*(SK_U16*)(Addr) = (SK_U16)(Val))
+#endif	/* SK_BIG_ENDIAN */
+
+#define AUTONEG_FAILED	SK_FALSE
+#define AUTONEG_SUCCESS	SK_TRUE
+
+
+/* typedefs *******************************************************************/
+
+/* RLMT packet.  Length: SK_RLMT_MAX_PACKET_SIZE (60) bytes. */
+typedef struct s_RlmtPacket {
+	SK_U8	DstAddr[SK_MAC_ADDR_LEN];
+	SK_U8	SrcAddr[SK_MAC_ADDR_LEN];
+	SK_U8	TypeLen[2];
+	SK_U8	DSap;
+	SK_U8	SSap;
+	SK_U8	Ctrl;
+	SK_U8	Indicator[7];
+	SK_U8	RlmtPacketType[2];
+	SK_U8	Align1[2];
+	SK_U8	Random[4];				/* Random value of requesting(!) station. */
+	SK_U8	RlmtPacketVersion[2];	/* RLMT Packet version. */
+	SK_U8	Data[SK_PACKET_DATA_LEN];
+} SK_RLMT_PACKET;
+
+typedef struct s_SpTreeRlmtPacket {
+	SK_U8	DstAddr[SK_MAC_ADDR_LEN];
+	SK_U8	SrcAddr[SK_MAC_ADDR_LEN];
+	SK_U8	TypeLen[2];
+	SK_U8	DSap;
+	SK_U8	SSap;
+	SK_U8	Ctrl;
+	SK_U8	ProtocolId[2];
+	SK_U8	ProtocolVersionId;
+	SK_U8	BpduType;
+	SK_U8	Flags;
+	SK_U8	RootId[8];
+	SK_U8	RootPathCost[4];
+	SK_U8	BridgeId[8];
+	SK_U8	PortId[2];
+	SK_U8	MessageAge[2];
+	SK_U8	MaxAge[2];
+	SK_U8	HelloTime[2];
+	SK_U8	ForwardDelay[2];
+} SK_SPTREE_PACKET;
+
+/* global variables ***********************************************************/
+
+SK_MAC_ADDR	SkRlmtMcAddr =	{{0x01,  0x00,  0x5A,  0x52,  0x4C,  0x4D}};
+SK_MAC_ADDR	BridgeMcAddr =	{{0x01,  0x80,  0xC2,  0x00,  0x00,  0x00}};
+
+/* local variables ************************************************************/
+
+/* None. */
+
+/* functions ******************************************************************/
+
+RLMT_STATIC void	SkRlmtCheckSwitch(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	SK_U32	NetIdx);
+RLMT_STATIC void	SkRlmtCheckSeg(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	SK_U32	NetIdx);
+RLMT_STATIC void	SkRlmtEvtSetNets(
+	SK_AC		*pAC,
+	SK_IOC		IoC,
+	SK_EVPARA	Para);
+
+/******************************************************************************
+ *
+ *	SkRlmtInit - initialize data, set state to init
+ *
+ * Description:
+ *
+ *	SK_INIT_DATA
+ *	============
+ *
+ *	This routine initializes all RLMT-related variables to a known state.
+ *	The initial state is SK_RLMT_RS_INIT.
+ *	All ports are initialized to SK_RLMT_PS_INIT.
+ *
+ *
+ *	SK_INIT_IO
+ *	==========
+ *
+ *	Nothing.
+ *
+ *
+ *	SK_INIT_RUN
+ *	===========
+ *
+ *	Determine the adapter's random value.
+ *	Set the hw registers, the "logical MAC address", the
+ *	RLMT multicast address, and eventually the BPDU multicast address.
+ *
+ * Context:
+ *	init, pageable
+ *
+ * Returns:
+ *	Nothing.
+ */
+void	SkRlmtInit(
+SK_AC	*pAC,	/* Adapter Context */
+SK_IOC	IoC,	/* I/O Context */
+int		Level)	/* Initialization Level */
+{
+	SK_U32		i, j;
+	SK_U64		Random;
+	SK_EVPARA	Para;
+    SK_MAC_ADDR		VirtualMacAddress;
+    SK_MAC_ADDR		PhysicalAMacAddress;
+    SK_BOOL		VirtualMacAddressSet;
+    SK_BOOL		PhysicalAMacAddressSet;
+
+	SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_INIT,
+		("RLMT Init level %d.\n", Level))
+
+	switch (Level) {
+	case SK_INIT_DATA:	/* Initialize data structures. */
+		SK_MEMSET((char *)&pAC->Rlmt, 0, sizeof(SK_RLMT));
+
+		for (i = 0; i < SK_MAX_MACS; i++) {
+			pAC->Rlmt.Port[i].PortState = SK_RLMT_PS_INIT;
+			pAC->Rlmt.Port[i].LinkDown = SK_TRUE;
+			pAC->Rlmt.Port[i].PortDown = SK_TRUE;
+			pAC->Rlmt.Port[i].PortStarted = SK_FALSE;
+			pAC->Rlmt.Port[i].PortNoRx = SK_FALSE;
+			pAC->Rlmt.Port[i].RootIdSet = SK_FALSE;
+			pAC->Rlmt.Port[i].PortNumber = i;
+			pAC->Rlmt.Port[i].Net = &pAC->Rlmt.Net[0];
+			pAC->Rlmt.Port[i].AddrPort = &pAC->Addr.Port[i];
+		}
+
+		pAC->Rlmt.NumNets = 1;
+		for (i = 0; i < SK_MAX_NETS; i++) {
+			pAC->Rlmt.Net[i].RlmtState = SK_RLMT_RS_INIT;
+			pAC->Rlmt.Net[i].RootIdSet = SK_FALSE;
+			pAC->Rlmt.Net[i].PrefPort = SK_RLMT_DEF_PREF_PORT;
+			pAC->Rlmt.Net[i].Preference = 0xFFFFFFFF;	  /* Automatic. */
+			/* Just assuming. */
+			pAC->Rlmt.Net[i].ActivePort = pAC->Rlmt.Net[i].PrefPort;
+			pAC->Rlmt.Net[i].RlmtMode = SK_RLMT_DEF_MODE;
+			pAC->Rlmt.Net[i].TimeoutValue = SK_RLMT_DEF_TO_VAL;
+			pAC->Rlmt.Net[i].NetNumber = i;
+		}
+
+		pAC->Rlmt.Net[0].Port[0] = &pAC->Rlmt.Port[0];
+		pAC->Rlmt.Net[0].Port[1] = &pAC->Rlmt.Port[1];
+#if SK_MAX_NETS > 1
+		pAC->Rlmt.Net[1].Port[0] = &pAC->Rlmt.Port[1];
+#endif	/* SK_MAX_NETS > 1 */
+		break;
+
+	case SK_INIT_IO:	/* GIMacsFound first available here. */
+		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_INIT,
+			("RLMT: %d MACs were detected.\n", pAC->GIni.GIMacsFound))
+
+		pAC->Rlmt.Net[0].NumPorts = pAC->GIni.GIMacsFound;
+
+		/* Initialize HW registers? */
+		if (pAC->GIni.GIMacsFound == 1) {
+			Para.Para32[0] = SK_RLMT_MODE_CLS;
+			Para.Para32[1] = 0;
+			(void)SkRlmtEvent(pAC, IoC, SK_RLMT_MODE_CHANGE, Para);
+		}
+		break;
+
+	case SK_INIT_RUN:
+		/* Ensure RLMT is set to one net. */
+		if (pAC->Rlmt.NumNets > 1) {
+			Para.Para32[0] = 1;
+			Para.Para32[1] = -1;
+			SkRlmtEvtSetNets(pAC, IoC, Para);
+		}
+
+		for (i = 0; i < (SK_U32)pAC->GIni.GIMacsFound; i++) {
+			Random = SkOsGetTime(pAC);
+			*(SK_U32*)&pAC->Rlmt.Port[i].Random = *(SK_U32*)&Random;
+
+			for (j = 0; j < 4; j++) {
+				pAC->Rlmt.Port[i].Random[j] ^= pAC->Rlmt.Port[i].AddrPort->
+					CurrentMacAddress.a[SK_MAC_ADDR_LEN - 1 - j];
+			}
+
+			(void)SkAddrMcClear(pAC, IoC, i, SK_ADDR_PERMANENT | SK_MC_SW_ONLY);
+			
+			/* Add RLMT MC address. */
+			(void)SkAddrMcAdd(pAC, IoC, i, &SkRlmtMcAddr, SK_ADDR_PERMANENT);
+
+			if (pAC->Rlmt.Net[0].RlmtMode & SK_RLMT_CHECK_SEG) {
+				/* Add BPDU MC address. */
+				(void)SkAddrMcAdd(pAC, IoC, i, &BridgeMcAddr, SK_ADDR_PERMANENT);
+			}
+
+			(void)SkAddrMcUpdate(pAC, IoC, i);
+		}
+
+    	VirtualMacAddressSet = SK_FALSE;
+		/* Read virtual MAC address from Control Register File. */
+		for (j = 0; j < SK_MAC_ADDR_LEN; j++) {
+			
+            SK_IN8(IoC, B2_MAC_1 + j, &VirtualMacAddress.a[j]);
+            VirtualMacAddressSet |= VirtualMacAddress.a[j];
+		}
+    	
+        PhysicalAMacAddressSet = SK_FALSE;
+		/* Read physical MAC address for MAC A from Control Register File. */
+		for (j = 0; j < SK_MAC_ADDR_LEN; j++) {
+			
+            SK_IN8(IoC, B2_MAC_2 + j, &PhysicalAMacAddress.a[j]);
+            PhysicalAMacAddressSet |= PhysicalAMacAddress.a[j];
+		}
+
+        /* check if the two mac addresses contain reasonable values */
+        if (!VirtualMacAddressSet || !PhysicalAMacAddressSet) {
+
+            pAC->Rlmt.RlmtOff = SK_TRUE;
+        }
+
+        /* if the two mac addresses are equal switch off the RLMT_PRE_LOOKAHEAD
+           and the RLMT_LOOKAHEAD macros */
+        else if (SK_ADDR_EQUAL(PhysicalAMacAddress.a, VirtualMacAddress.a)) {
+
+            pAC->Rlmt.RlmtOff = SK_TRUE;
+        }
+		else {
+			pAC->Rlmt.RlmtOff = SK_FALSE;
+		}
+		break;
+
+	default:	/* error */
+		break;
+	}
+	return;
+}	/* SkRlmtInit */
+
+
+/******************************************************************************
+ *
+ *	SkRlmtBuildCheckChain - build the check chain
+ *
+ * Description:
+ *	This routine builds the local check chain:
+ *	- Each port that is up checks the next port.
+ *	- The last port that is up checks the first port that is up.
+ *
+ * Notes:
+ *	- Currently only local ports are considered when building the chain.
+ *	- Currently the SuspectState is just reset;
+ *	  it would be better to save it ...
+ *
+ * Context:
+ *	runtime, pageable?
+ *
+ * Returns:
+ *	Nothing
+ */
+RLMT_STATIC void	SkRlmtBuildCheckChain(
+SK_AC	*pAC,	/* Adapter Context */
+SK_U32	NetIdx)	/* Net Number */
+{
+	SK_U32			i;
+	SK_U32			NumMacsUp;
+	SK_RLMT_PORT *	FirstMacUp;
+	SK_RLMT_PORT *	PrevMacUp;
+
+	FirstMacUp	= NULL;
+	PrevMacUp	= NULL;
+	
+	if (!(pAC->Rlmt.Net[NetIdx].RlmtMode & SK_RLMT_CHECK_LOC_LINK)) {
+		for (i = 0; i < pAC->Rlmt.Net[i].NumPorts; i++) {
+			pAC->Rlmt.Net[NetIdx].Port[i]->PortsChecked = 0;
+		}
+		return;	/* Done. */
+	}
+			
+	SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+		("SkRlmtBuildCheckChain.\n"))
+
+	NumMacsUp = 0;
+
+	for (i = 0; i < pAC->Rlmt.Net[NetIdx].NumPorts; i++) {
+		pAC->Rlmt.Net[NetIdx].Port[i]->PortsChecked = 0;
+		pAC->Rlmt.Net[NetIdx].Port[i]->PortsSuspect = 0;
+		pAC->Rlmt.Net[NetIdx].Port[i]->CheckingState &=
+			~(SK_RLMT_PCS_RX | SK_RLMT_PCS_TX);
+
+		/*
+		 * If more than two links are detected we should consider
+		 * checking at least two other ports:
+		 * 1. the next port that is not LinkDown and
+		 * 2. the next port that is not PortDown.
+		 */
+		if (!pAC->Rlmt.Net[NetIdx].Port[i]->LinkDown) {
+			if (NumMacsUp == 0) {
+				FirstMacUp = pAC->Rlmt.Net[NetIdx].Port[i];
+			}
+			else {
+				PrevMacUp->PortCheck[
+					pAC->Rlmt.Net[NetIdx].Port[i]->PortsChecked].CheckAddr =
+					pAC->Rlmt.Net[NetIdx].Port[i]->AddrPort->CurrentMacAddress;
+				PrevMacUp->PortCheck[
+					PrevMacUp->PortsChecked].SuspectTx = SK_FALSE;
+				PrevMacUp->PortsChecked++;
+			}
+			PrevMacUp = pAC->Rlmt.Net[NetIdx].Port[i];
+			NumMacsUp++;
+		}
+	}
+
+	if (NumMacsUp > 1) {
+		PrevMacUp->PortCheck[PrevMacUp->PortsChecked].CheckAddr =
+			FirstMacUp->AddrPort->CurrentMacAddress;
+		PrevMacUp->PortCheck[PrevMacUp->PortsChecked].SuspectTx =
+			SK_FALSE;
+		PrevMacUp->PortsChecked++;
+	}
+
+#ifdef DEBUG
+	for (i = 0; i < pAC->Rlmt.Net[NetIdx].NumPorts; i++) {
+		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+			("Port %d checks %d other ports: %2X.\n", i,
+				pAC->Rlmt.Net[NetIdx].Port[i]->PortsChecked,
+				pAC->Rlmt.Net[NetIdx].Port[i]->PortCheck[0].CheckAddr.a[5]))
+	}
+#endif	/* DEBUG */
+
+	return;
+}	/* SkRlmtBuildCheckChain */
+
+
+/******************************************************************************
+ *
+ *	SkRlmtBuildPacket - build an RLMT packet
+ *
+ * Description:
+ *	This routine sets up an RLMT packet.
+ *
+ * Context:
+ *	runtime, pageable?
+ *
+ * Returns:
+ *	NULL or pointer to RLMT mbuf
+ */
+RLMT_STATIC SK_MBUF	*SkRlmtBuildPacket(
+SK_AC		*pAC,		/* Adapter Context */
+SK_IOC		IoC,		/* I/O Context */
+SK_U32		PortNumber,	/* Sending port */
+SK_U16		PacketType,	/* RLMT packet type */
+SK_MAC_ADDR	*SrcAddr,	/* Source address */
+SK_MAC_ADDR	*DestAddr)	/* Destination address */
+{
+	int		i;
+	SK_U16		Length;
+	SK_MBUF		*pMb;
+	SK_RLMT_PACKET	*pPacket;
+
+#ifdef DEBUG
+	SK_U8	CheckSrc  = 0;
+	SK_U8	CheckDest = 0;
+	
+	for (i = 0; i < SK_MAC_ADDR_LEN; ++i) {
+		CheckSrc  |= SrcAddr->a[i];
+		CheckDest |= DestAddr->a[i];
+	}
+
+	if ((CheckSrc == 0) || (CheckDest == 0)) {
+		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_ERR,
+			("SkRlmtBuildPacket: Invalid %s%saddr.\n",
+			 (CheckSrc == 0 ? "Src" : ""), (CheckDest == 0 ? "Dest" : "")))
+	}
+#endif
+
+	if ((pMb = SkDrvAllocRlmtMbuf(pAC, IoC, SK_RLMT_MAX_PACKET_SIZE)) != NULL) {
+		pPacket = (SK_RLMT_PACKET*)pMb->pData;
+		for (i = 0; i < SK_MAC_ADDR_LEN; i++) {
+			pPacket->DstAddr[i] = DestAddr->a[i];
+			pPacket->SrcAddr[i] = SrcAddr->a[i];
+		}
+		pPacket->DSap = SK_RLMT_DSAP;
+		pPacket->SSap = SK_RLMT_SSAP;
+		pPacket->Ctrl = SK_RLMT_CTRL;
+		pPacket->Indicator[0] = SK_RLMT_INDICATOR0;
+		pPacket->Indicator[1] = SK_RLMT_INDICATOR1;
+		pPacket->Indicator[2] = SK_RLMT_INDICATOR2;
+		pPacket->Indicator[3] = SK_RLMT_INDICATOR3;
+		pPacket->Indicator[4] = SK_RLMT_INDICATOR4;
+		pPacket->Indicator[5] = SK_RLMT_INDICATOR5;
+		pPacket->Indicator[6] = SK_RLMT_INDICATOR6;
+
+		SK_U16_TO_NETWORK_ORDER(PacketType, &pPacket->RlmtPacketType[0]);
+
+		for (i = 0; i < 4; i++) {
+			pPacket->Random[i] = pAC->Rlmt.Port[PortNumber].Random[i];
+		}
+		
+		SK_U16_TO_NETWORK_ORDER(
+			SK_RLMT_PACKET_VERSION, &pPacket->RlmtPacketVersion[0]);
+
+		for (i = 0; i < SK_PACKET_DATA_LEN; i++) {
+			pPacket->Data[i] = 0x00;
+		}
+
+		Length = SK_RLMT_MAX_PACKET_SIZE;	/* Or smaller. */
+		pMb->Length = Length;
+		pMb->PortIdx = PortNumber;
+		Length -= 14;
+		SK_U16_TO_NETWORK_ORDER(Length, &pPacket->TypeLen[0]);
+
+		if (PacketType == SK_PACKET_ALIVE) {
+			pAC->Rlmt.Port[PortNumber].TxHelloCts++;
+		}
+	}
+
+	return (pMb);
+}	/* SkRlmtBuildPacket */
+
+
+/******************************************************************************
+ *
+ *	SkRlmtBuildSpanningTreePacket - build spanning tree check packet
+ *
+ * Description:
+ *	This routine sets up a BPDU packet for spanning tree check.
+ *
+ * Context:
+ *	runtime, pageable?
+ *
+ * Returns:
+ *	NULL or pointer to RLMT mbuf
+ */
+RLMT_STATIC SK_MBUF	*SkRlmtBuildSpanningTreePacket(
+SK_AC	*pAC,		/* Adapter Context */
+SK_IOC	IoC,		/* I/O Context */
+SK_U32	PortNumber)	/* Sending port */
+{
+	unsigned			i;
+	SK_U16				Length;
+	SK_MBUF				*pMb;
+	SK_SPTREE_PACKET	*pSPacket;
+
+	if ((pMb = SkDrvAllocRlmtMbuf(pAC, IoC, SK_RLMT_MAX_PACKET_SIZE)) !=
+		NULL) {
+		pSPacket = (SK_SPTREE_PACKET*)pMb->pData;
+		for (i = 0; i < SK_MAC_ADDR_LEN; i++) {
+			pSPacket->DstAddr[i] = BridgeMcAddr.a[i];
+			pSPacket->SrcAddr[i] =
+				pAC->Addr.Port[PortNumber].CurrentMacAddress.a[i];
+		}
+		pSPacket->DSap = SK_RLMT_SPT_DSAP;
+		pSPacket->SSap = SK_RLMT_SPT_SSAP;
+		pSPacket->Ctrl = SK_RLMT_SPT_CTRL;
+
+		pSPacket->ProtocolId[0] = SK_RLMT_SPT_PROTOCOL_ID0;
+		pSPacket->ProtocolId[1] = SK_RLMT_SPT_PROTOCOL_ID1;
+		pSPacket->ProtocolVersionId = SK_RLMT_SPT_PROTOCOL_VERSION_ID;
+		pSPacket->BpduType = SK_RLMT_SPT_BPDU_TYPE;
+		pSPacket->Flags = SK_RLMT_SPT_FLAGS;
+		pSPacket->RootId[0] = SK_RLMT_SPT_ROOT_ID0;
+		pSPacket->RootId[1] = SK_RLMT_SPT_ROOT_ID1;
+		pSPacket->RootPathCost[0] = SK_RLMT_SPT_ROOT_PATH_COST0;
+		pSPacket->RootPathCost[1] = SK_RLMT_SPT_ROOT_PATH_COST1;
+		pSPacket->RootPathCost[2] = SK_RLMT_SPT_ROOT_PATH_COST2;
+		pSPacket->RootPathCost[3] = SK_RLMT_SPT_ROOT_PATH_COST3;
+		pSPacket->BridgeId[0] = SK_RLMT_SPT_BRIDGE_ID0;
+		pSPacket->BridgeId[1] = SK_RLMT_SPT_BRIDGE_ID1;
+
+		/*
+		 * Use logical MAC address as bridge ID and filter these packets
+		 * on receive.
+		 */
+		for (i = 0; i < SK_MAC_ADDR_LEN; i++) {
+			pSPacket->BridgeId[i + 2] = pSPacket->RootId[i + 2] =
+				pAC->Addr.Net[pAC->Rlmt.Port[PortNumber].Net->NetNumber].
+					CurrentMacAddress.a[i];
+		}
+		pSPacket->PortId[0] = SK_RLMT_SPT_PORT_ID0;
+		pSPacket->PortId[1] = SK_RLMT_SPT_PORT_ID1;
+		pSPacket->MessageAge[0] = SK_RLMT_SPT_MSG_AGE0;
+		pSPacket->MessageAge[1] = SK_RLMT_SPT_MSG_AGE1;
+		pSPacket->MaxAge[0] = SK_RLMT_SPT_MAX_AGE0;
+		pSPacket->MaxAge[1] = SK_RLMT_SPT_MAX_AGE1;
+		pSPacket->HelloTime[0] = SK_RLMT_SPT_HELLO_TIME0;
+		pSPacket->HelloTime[1] = SK_RLMT_SPT_HELLO_TIME1;
+		pSPacket->ForwardDelay[0] = SK_RLMT_SPT_FWD_DELAY0;
+		pSPacket->ForwardDelay[1] = SK_RLMT_SPT_FWD_DELAY1;
+
+		Length = SK_RLMT_MAX_PACKET_SIZE;	/* Or smaller. */
+		pMb->Length = Length;
+		pMb->PortIdx = PortNumber;
+		Length -= 14;
+		SK_U16_TO_NETWORK_ORDER(Length, &pSPacket->TypeLen[0]);
+
+		pAC->Rlmt.Port[PortNumber].TxSpHelloReqCts++;
+	}
+
+	return (pMb);
+}	/* SkRlmtBuildSpanningTreePacket */
+
+
+/******************************************************************************
+ *
+ *	SkRlmtSend - build and send check packets
+ *
+ * Description:
+ *	Depending on the RLMT state and the checking state, several packets
+ *	are sent through the indicated port.
+ *
+ * Context:
+ *	runtime, pageable?
+ *
+ * Returns:
+ *	Nothing.
+ */
+RLMT_STATIC void	SkRlmtSend(
+SK_AC	*pAC,		/* Adapter Context */
+SK_IOC	IoC,		/* I/O Context */
+SK_U32	PortNumber)	/* Sending port */
+{
+	unsigned	j;
+	SK_EVPARA	Para;
+	SK_RLMT_PORT	*pRPort;
+
+	pRPort = &pAC->Rlmt.Port[PortNumber];
+	if (pAC->Rlmt.Port[PortNumber].Net->RlmtMode & SK_RLMT_CHECK_LOC_LINK) {
+		if (pRPort->CheckingState & (SK_RLMT_PCS_TX | SK_RLMT_PCS_RX)) {
+			/* Port is suspicious. Send the RLMT packet to the RLMT mc addr. */
+			if ((Para.pParaPtr = SkRlmtBuildPacket(pAC, IoC, PortNumber,
+				SK_PACKET_ALIVE, &pAC->Addr.Port[PortNumber].CurrentMacAddress,
+				&SkRlmtMcAddr)) != NULL) {
+				SkEventQueue(pAC, SKGE_DRV, SK_DRV_RLMT_SEND, Para);
+			}
+		}
+		else {
+			/*
+			 * Send a directed RLMT packet to all ports that are
+			 * checked by the indicated port.
+			 */
+			for (j = 0; j < pRPort->PortsChecked; j++) {
+				if ((Para.pParaPtr = SkRlmtBuildPacket(pAC, IoC, PortNumber,
+					SK_PACKET_ALIVE, &pAC->Addr.Port[PortNumber].CurrentMacAddress,
+					&pRPort->PortCheck[j].CheckAddr)) != NULL) {
+					SkEventQueue(pAC, SKGE_DRV, SK_DRV_RLMT_SEND, Para);
+				}
+			}
+		}
+	}
+
+	if ((pAC->Rlmt.Port[PortNumber].Net->RlmtMode & SK_RLMT_CHECK_SEG) &&
+		(pAC->Rlmt.Port[PortNumber].Net->CheckingState & SK_RLMT_RCS_SEND_SEG)) {
+		/*
+		 * Send a BPDU packet to make a connected switch tell us
+		 * the correct root bridge.
+		 */
+		if ((Para.pParaPtr =
+			SkRlmtBuildSpanningTreePacket(pAC, IoC, PortNumber)) != NULL) {
+			pAC->Rlmt.Port[PortNumber].Net->CheckingState &= ~SK_RLMT_RCS_SEND_SEG;
+			pRPort->RootIdSet = SK_FALSE;
+
+			SkEventQueue(pAC, SKGE_DRV, SK_DRV_RLMT_SEND, Para);
+			SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_TX,
+				("SkRlmtSend: BPDU Packet on Port %u.\n", PortNumber))
+		}
+	}
+	return;
+}	/* SkRlmtSend */
+
+
+/******************************************************************************
+ *
+ *	SkRlmtPortReceives - check if port is (going) down and bring it up
+ *
+ * Description:
+ *	This routine checks if a port who received a non-BPDU packet
+ *	needs to go up or needs to be stopped going down.
+ *
+ * Context:
+ *	runtime, pageable?
+ *
+ * Returns:
+ *	Nothing.
+ */
+RLMT_STATIC void	SkRlmtPortReceives(
+SK_AC	*pAC,			/* Adapter Context */
+SK_IOC	IoC,			/* I/O Context */
+SK_U32	PortNumber)		/* Port to check */
+{
+	SK_RLMT_PORT	*pRPort;
+	SK_EVPARA		Para;
+
+	pRPort = &pAC->Rlmt.Port[PortNumber];
+	pRPort->PortNoRx = SK_FALSE;
+
+	if ((pRPort->PortState == SK_RLMT_PS_DOWN) &&
+		!(pRPort->CheckingState & SK_RLMT_PCS_TX)) {
+		/*
+		 * Port is marked down (rx), but received a non-BPDU packet.
+		 * Bring it up.
+		 */
+		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_RX,
+			("SkRlmtPacketReceive: Received on PortDown.\n"))
+
+		pRPort->PortState = SK_RLMT_PS_GOING_UP;
+		pRPort->GuTimeStamp = SkOsGetTime(pAC);
+		Para.Para32[0] = PortNumber;
+		Para.Para32[1] = (SK_U32)-1;
+		SkTimerStart(pAC, IoC, &pRPort->UpTimer, SK_RLMT_PORTUP_TIM_VAL,
+			SKGE_RLMT, SK_RLMT_PORTUP_TIM, Para);
+		pRPort->CheckingState &= ~SK_RLMT_PCS_RX;
+		/* pAC->Rlmt.CheckSwitch = SK_TRUE; */
+		SkRlmtCheckSwitch(pAC, IoC, pRPort->Net->NetNumber);
+	}	/* PortDown && !SuspectTx */
+	else if (pRPort->CheckingState & SK_RLMT_PCS_RX) {
+		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_RX,
+			("SkRlmtPacketReceive: Stop bringing port down.\n"))
+		SkTimerStop(pAC, IoC, &pRPort->DownRxTimer);
+		pRPort->CheckingState &= ~SK_RLMT_PCS_RX;
+		/* pAC->Rlmt.CheckSwitch = SK_TRUE; */
+		SkRlmtCheckSwitch(pAC, IoC, pRPort->Net->NetNumber);
+	}	/* PortGoingDown */
+
+	return;
+}	/* SkRlmtPortReceives */
+
+
+/******************************************************************************
+ *
+ *	SkRlmtPacketReceive - receive a packet for closer examination
+ *
+ * Description:
+ *	This routine examines a packet more closely than SK_RLMT_LOOKAHEAD.
+ *
+ * Context:
+ *	runtime, pageable?
+ *
+ * Returns:
+ *	Nothing.
+ */
+RLMT_STATIC void	SkRlmtPacketReceive(
+SK_AC	*pAC,	/* Adapter Context */
+SK_IOC	IoC,	/* I/O Context */
+SK_MBUF	*pMb)	/* Received packet */
+{
+#ifdef xDEBUG
+	extern	void DumpData(char *p, int size);
+#endif	/* DEBUG */
+	int					i;
+	unsigned			j;
+	SK_U16				PacketType;
+	SK_U32				PortNumber;
+	SK_ADDR_PORT		*pAPort;
+	SK_RLMT_PORT		*pRPort;
+	SK_RLMT_PACKET		*pRPacket;
+	SK_SPTREE_PACKET	*pSPacket;
+	SK_EVPARA			Para;
+
+	PortNumber	= pMb->PortIdx;
+	pAPort = &pAC->Addr.Port[PortNumber];
+	pRPort = &pAC->Rlmt.Port[PortNumber];
+
+	SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_RX,
+		("SkRlmtPacketReceive: PortNumber == %d.\n", PortNumber))
+
+	pRPacket = (SK_RLMT_PACKET*)pMb->pData;
+	pSPacket = (SK_SPTREE_PACKET*)pRPacket;
+
+#ifdef xDEBUG
+	DumpData((char *)pRPacket, 32);
+#endif	/* DEBUG */
+
+	if ((pRPort->PacketsPerTimeSlot - pRPort->BpduPacketsPerTimeSlot) != 0) {
+		SkRlmtPortReceives(pAC, IoC, PortNumber);
+	}
+	
+	/* Check destination address. */
+
+	if (!SK_ADDR_EQUAL(pAPort->CurrentMacAddress.a, pRPacket->DstAddr) &&
+		!SK_ADDR_EQUAL(SkRlmtMcAddr.a, pRPacket->DstAddr) &&
+		!SK_ADDR_EQUAL(BridgeMcAddr.a, pRPacket->DstAddr)) {
+
+		/* Not sent to current MAC or registered MC address => Trash it. */
+		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_RX,
+			("SkRlmtPacketReceive: Not for me.\n"))
+
+		SkDrvFreeRlmtMbuf(pAC, IoC, pMb);
+		return;
+	}
+	else if (SK_ADDR_EQUAL(pAPort->CurrentMacAddress.a, pRPacket->SrcAddr)) {
+
+		/*
+		 * Was sent by same port (may happen during port switching
+		 * or in case of duplicate MAC addresses).
+		 */
+
+		/*
+		 * Check for duplicate address here:
+		 * If Packet.Random != My.Random => DupAddr.
+		 */
+		for (i = 3; i >= 0; i--) {
+			if (pRPort->Random[i] != pRPacket->Random[i]) {
+				break;
+			}
+		}
+
+		/*
+		 * CAUTION: Do not check for duplicate MAC address in RLMT Alive Reply
+		 * packets (they have the LLC_COMMAND_RESPONSE_BIT set in
+		 * pRPacket->SSap).
+		 */
+		if (i >= 0 && pRPacket->DSap == SK_RLMT_DSAP &&
+			pRPacket->Ctrl == SK_RLMT_CTRL &&
+			pRPacket->SSap == SK_RLMT_SSAP &&
+			pRPacket->Indicator[0] == SK_RLMT_INDICATOR0 &&
+			pRPacket->Indicator[1] == SK_RLMT_INDICATOR1 &&
+			pRPacket->Indicator[2] == SK_RLMT_INDICATOR2 &&
+			pRPacket->Indicator[3] == SK_RLMT_INDICATOR3 &&
+			pRPacket->Indicator[4] == SK_RLMT_INDICATOR4 &&
+			pRPacket->Indicator[5] == SK_RLMT_INDICATOR5 &&
+			pRPacket->Indicator[6] == SK_RLMT_INDICATOR6) {
+			SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_RX,
+				("SkRlmtPacketReceive: Duplicate MAC Address.\n"))
+
+			/* Error Log entry. */
+			SK_ERR_LOG(pAC, SK_ERRCL_COMM, SKERR_RLMT_E006, SKERR_RLMT_E006_MSG);
+		}
+		else {
+			/* Simply trash it. */
+			SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_RX,
+				("SkRlmtPacketReceive: Sent by me.\n"))
+		}
+
+		SkDrvFreeRlmtMbuf(pAC, IoC, pMb);
+		return;
+	}
+
+	/* Check SuspectTx entries. */
+	if (pRPort->PortsSuspect > 0) {
+		for (j = 0; j < pRPort->PortsChecked; j++) {
+			if (pRPort->PortCheck[j].SuspectTx &&
+				SK_ADDR_EQUAL(
+					pRPacket->SrcAddr, pRPort->PortCheck[j].CheckAddr.a)) {
+				pRPort->PortCheck[j].SuspectTx = SK_FALSE;
+				pRPort->PortsSuspect--;
+				break;
+			}
+		}
+	}
+
+	/* Determine type of packet. */
+	if (pRPacket->DSap == SK_RLMT_DSAP &&
+		pRPacket->Ctrl == SK_RLMT_CTRL &&
+		(pRPacket->SSap & ~LLC_COMMAND_RESPONSE_BIT) == SK_RLMT_SSAP &&
+		pRPacket->Indicator[0] == SK_RLMT_INDICATOR0 &&
+		pRPacket->Indicator[1] == SK_RLMT_INDICATOR1 &&
+		pRPacket->Indicator[2] == SK_RLMT_INDICATOR2 &&
+		pRPacket->Indicator[3] == SK_RLMT_INDICATOR3 &&
+		pRPacket->Indicator[4] == SK_RLMT_INDICATOR4 &&
+		pRPacket->Indicator[5] == SK_RLMT_INDICATOR5 &&
+		pRPacket->Indicator[6] == SK_RLMT_INDICATOR6) {
+
+		/* It's an RLMT packet. */
+		PacketType = (SK_U16)((pRPacket->RlmtPacketType[0] << 8) |
+			pRPacket->RlmtPacketType[1]);
+
+		switch (PacketType) {
+		case SK_PACKET_ANNOUNCE:	/* Not yet used. */
+#if 0
+			/* Build the check chain. */
+			SkRlmtBuildCheckChain(pAC);
+#endif	/* 0 */
+
+			SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_RX,
+				("SkRlmtPacketReceive: Announce.\n"))
+
+			SkDrvFreeRlmtMbuf(pAC, IoC, pMb);
+			break;
+
+		case SK_PACKET_ALIVE:
+			if (pRPacket->SSap & LLC_COMMAND_RESPONSE_BIT) {
+				SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_RX,
+					("SkRlmtPacketReceive: Alive Reply.\n"))
+
+				if (!(pAC->Addr.Port[PortNumber].PromMode & SK_PROM_MODE_LLC) ||
+					SK_ADDR_EQUAL(
+						pRPacket->DstAddr, pAPort->CurrentMacAddress.a)) {
+					/* Obviously we could send something. */
+					if (pRPort->CheckingState & SK_RLMT_PCS_TX) {
+						pRPort->CheckingState &=  ~SK_RLMT_PCS_TX;
+						SkTimerStop(pAC, IoC, &pRPort->DownTxTimer);
+					}
+
+					if ((pRPort->PortState == SK_RLMT_PS_DOWN) &&
+						!(pRPort->CheckingState & SK_RLMT_PCS_RX)) {
+						pRPort->PortState = SK_RLMT_PS_GOING_UP;
+						pRPort->GuTimeStamp = SkOsGetTime(pAC);
+
+						SkTimerStop(pAC, IoC, &pRPort->DownTxTimer);
+
+						Para.Para32[0] = PortNumber;
+						Para.Para32[1] = (SK_U32)-1;
+						SkTimerStart(pAC, IoC, &pRPort->UpTimer,
+							SK_RLMT_PORTUP_TIM_VAL, SKGE_RLMT,
+							SK_RLMT_PORTUP_TIM, Para);
+					}
+				}
+
+				/* Mark sending port as alive? */
+				SkDrvFreeRlmtMbuf(pAC, IoC, pMb);
+			}
+			else {	/* Alive Request Packet. */
+				SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_RX,
+					("SkRlmtPacketReceive: Alive Request.\n"))
+
+				pRPort->RxHelloCts++;
+
+				/* Answer. */
+				for (i = 0; i < SK_MAC_ADDR_LEN; i++) {
+					pRPacket->DstAddr[i] = pRPacket->SrcAddr[i];
+					pRPacket->SrcAddr[i] =
+						pAC->Addr.Port[PortNumber].CurrentMacAddress.a[i];
+				}
+				pRPacket->SSap |= LLC_COMMAND_RESPONSE_BIT;
+
+				Para.pParaPtr = pMb;
+				SkEventQueue(pAC, SKGE_DRV, SK_DRV_RLMT_SEND, Para);
+			}
+			break;
+
+		case SK_PACKET_CHECK_TX:
+			SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_RX,
+				("SkRlmtPacketReceive: Check your tx line.\n"))
+
+			/* A port checking us requests us to check our tx line. */
+			pRPort->CheckingState |= SK_RLMT_PCS_TX;
+
+			/* Start PortDownTx timer. */
+			Para.Para32[0] = PortNumber;
+			Para.Para32[1] = (SK_U32)-1;
+			SkTimerStart(pAC, IoC, &pRPort->DownTxTimer,
+				SK_RLMT_PORTDOWN_TIM_VAL, SKGE_RLMT,
+				SK_RLMT_PORTDOWN_TX_TIM, Para);
+
+			SkDrvFreeRlmtMbuf(pAC, IoC, pMb);
+
+			if ((Para.pParaPtr = SkRlmtBuildPacket(pAC, IoC, PortNumber,
+				SK_PACKET_ALIVE, &pAC->Addr.Port[PortNumber].CurrentMacAddress,
+				&SkRlmtMcAddr)) != NULL) {
+				SkEventQueue(pAC, SKGE_DRV, SK_DRV_RLMT_SEND, Para);
+			}
+			break;
+
+		case SK_PACKET_ADDR_CHANGED:
+			SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_RX,
+				("SkRlmtPacketReceive: Address Change.\n"))
+
+			/* Build the check chain. */
+			SkRlmtBuildCheckChain(pAC, pRPort->Net->NetNumber);
+			SkDrvFreeRlmtMbuf(pAC, IoC, pMb);
+			break;
+
+		default:
+			SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_RX,
+				("SkRlmtPacketReceive: Unknown RLMT packet.\n"))
+
+			/* RA;:;: ??? */
+			SkDrvFreeRlmtMbuf(pAC, IoC, pMb);
+		}
+	}
+	else if (pSPacket->DSap == SK_RLMT_SPT_DSAP &&
+		pSPacket->Ctrl == SK_RLMT_SPT_CTRL &&
+		(pSPacket->SSap & ~LLC_COMMAND_RESPONSE_BIT) == SK_RLMT_SPT_SSAP) {
+		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_RX,
+			("SkRlmtPacketReceive: BPDU Packet.\n"))
+
+		/* Spanning Tree packet. */
+		pRPort->RxSpHelloCts++;
+
+		if (!SK_ADDR_EQUAL(&pSPacket->RootId[2], &pAC->Addr.Net[pAC->Rlmt.
+			Port[PortNumber].Net->NetNumber].CurrentMacAddress.a[0])) {
+			/*
+			 * Check segmentation if a new root bridge is set and
+			 * the segmentation check is not currently running.
+			 */
+			if (!SK_ADDR_EQUAL(&pSPacket->RootId[2], &pRPort->Root.Id[2]) &&
+				(pAC->Rlmt.Port[PortNumber].Net->LinksUp > 1) &&
+				(pAC->Rlmt.Port[PortNumber].Net->RlmtMode & SK_RLMT_CHECK_SEG)
+				!= 0 && (pAC->Rlmt.Port[PortNumber].Net->CheckingState &
+				SK_RLMT_RCS_SEG) == 0) {
+				pAC->Rlmt.Port[PortNumber].Net->CheckingState |=
+					SK_RLMT_RCS_START_SEG | SK_RLMT_RCS_SEND_SEG;
+			}
+
+			/* Store tree view of this port. */
+			for (i = 0; i < 8; i++) {
+				pRPort->Root.Id[i] = pSPacket->RootId[i];
+			}
+			pRPort->RootIdSet = SK_TRUE;
+
+			SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_DUMP,
+				("Root ID %d: %02x %02x %02x %02x %02x %02x %02x %02x.\n",
+					PortNumber,
+					pRPort->Root.Id[0], pRPort->Root.Id[1],
+					pRPort->Root.Id[2], pRPort->Root.Id[3],
+					pRPort->Root.Id[4], pRPort->Root.Id[5],
+					pRPort->Root.Id[6], pRPort->Root.Id[7]))
+		}
+
+		SkDrvFreeRlmtMbuf(pAC, IoC, pMb);
+		if ((pAC->Rlmt.Port[PortNumber].Net->CheckingState &
+			SK_RLMT_RCS_REPORT_SEG) != 0) {
+			SkRlmtCheckSeg(pAC, IoC, pAC->Rlmt.Port[PortNumber].Net->NetNumber);
+		}
+	}
+	else {
+		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_RX,
+			("SkRlmtPacketReceive: Unknown Packet Type.\n"))
+
+		/* Unknown packet. */
+		SkDrvFreeRlmtMbuf(pAC, IoC, pMb);
+	}
+	return;
+}	/* SkRlmtPacketReceive */
+
+
+/******************************************************************************
+ *
+ *	SkRlmtCheckPort - check if a port works
+ *
+ * Description:
+ *	This routine checks if a port whose link is up received something
+ *	and if it seems to transmit successfully.
+ *
+ *	# PortState: PsInit, PsLinkDown, PsDown, PsGoingUp, PsUp
+ *	# PortCheckingState (Bitfield): ChkTx, ChkRx, ChkSeg
+ *	# RlmtCheckingState (Bitfield): ChkSeg, StartChkSeg, ReportSeg
+ *
+ *	if (Rx - RxBpdu == 0) {	# No rx.
+ *		if (state == PsUp) {
+ *			PortCheckingState |= ChkRx
+ *		}
+ *		if (ModeCheckSeg && (Timeout ==
+ *			TO_SHORTEN(RLMT_DEFAULT_TIMEOUT))) {
+ *			RlmtCheckingState |= ChkSeg)
+ *			PortCheckingState |= ChkSeg
+ *		}
+ *		NewTimeout = TO_SHORTEN(Timeout)
+ *		if (NewTimeout < RLMT_MIN_TIMEOUT) {
+ *			NewTimeout = RLMT_MIN_TIMEOUT
+ *			PortState = PsDown
+ *			...
+ *		}
+ *	}
+ *	else {	# something was received
+ *		# Set counter to 0 at LinkDown?
+ *		#   No - rx may be reported after LinkDown ???
+ *		PortCheckingState &= ~ChkRx
+ *		NewTimeout = RLMT_DEFAULT_TIMEOUT
+ *		if (RxAck == 0) {
+ *			possible reasons:
+ *			is my tx line bad? --
+ *				send RLMT multicast and report
+ *				back internally? (only possible
+ *				between ports on same adapter)
+ *		}
+ *		if (RxChk == 0) {
+ *			possible reasons:
+ *			- tx line of port set to check me
+ *			  maybe bad
+ *			- no other port/adapter available or set
+ *			  to check me
+ *			- adapter checking me has a longer
+ *			  timeout
+ *			??? anything that can be done here?
+ *		}
+ *	}
+ *
+ * Context:
+ *	runtime, pageable?
+ *
+ * Returns:
+ *	New timeout value.
+ */
+RLMT_STATIC SK_U32	SkRlmtCheckPort(
+SK_AC	*pAC,		/* Adapter Context */
+SK_IOC	IoC,		/* I/O Context */
+SK_U32	PortNumber)	/* Port to check */
+{
+	unsigned		i;
+	SK_U32			NewTimeout;
+	SK_RLMT_PORT	*pRPort;
+	SK_EVPARA		Para;
+
+	pRPort = &pAC->Rlmt.Port[PortNumber];
+
+	if ((pRPort->PacketsPerTimeSlot - pRPort->BpduPacketsPerTimeSlot) == 0) {
+		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+			("SkRlmtCheckPort %d: No (%d) receives in last time slot.\n",
+				PortNumber, pRPort->PacketsPerTimeSlot))
+
+		/*
+		 * Check segmentation if there was no receive at least twice
+		 * in a row (PortNoRx is already set) and the segmentation
+		 * check is not currently running.
+		 */
+
+		if (pRPort->PortNoRx && (pAC->Rlmt.Port[PortNumber].Net->LinksUp > 1) &&
+			(pAC->Rlmt.Port[PortNumber].Net->RlmtMode & SK_RLMT_CHECK_SEG) &&
+			!(pAC->Rlmt.Port[PortNumber].Net->CheckingState & SK_RLMT_RCS_SEG)) {
+			pAC->Rlmt.Port[PortNumber].Net->CheckingState |=
+				SK_RLMT_RCS_START_SEG | SK_RLMT_RCS_SEND_SEG;
+		}
+
+		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+			("SkRlmtCheckPort: PortsSuspect %d, PcsRx %d.\n",
+				pRPort->PortsSuspect, pRPort->CheckingState & SK_RLMT_PCS_RX))
+
+		if (pRPort->PortState != SK_RLMT_PS_DOWN) {
+			NewTimeout = TO_SHORTEN(pAC->Rlmt.Port[PortNumber].Net->TimeoutValue);
+			if (NewTimeout < SK_RLMT_MIN_TO_VAL) {
+				NewTimeout = SK_RLMT_MIN_TO_VAL;
+			}
+
+			if (!(pRPort->CheckingState & SK_RLMT_PCS_RX)) {
+				Para.Para32[0] = PortNumber;
+				pRPort->CheckingState |= SK_RLMT_PCS_RX;
+
+				/*
+				 * What shall we do if the port checked by this one receives
+				 * our request frames?  What's bad - our rx line or his tx line?
+				 */
+				Para.Para32[1] = (SK_U32)-1;
+				SkTimerStart(pAC, IoC, &pRPort->DownRxTimer,
+					SK_RLMT_PORTDOWN_TIM_VAL, SKGE_RLMT,
+					SK_RLMT_PORTDOWN_RX_TIM, Para);
+
+				for (i = 0; i < pRPort->PortsChecked; i++) {
+					if (pRPort->PortCheck[i].SuspectTx) {
+						continue;
+					}
+					pRPort->PortCheck[i].SuspectTx = SK_TRUE;
+					pRPort->PortsSuspect++;
+					if ((Para.pParaPtr =
+						SkRlmtBuildPacket(pAC, IoC, PortNumber, SK_PACKET_CHECK_TX,
+							&pAC->Addr.Port[PortNumber].CurrentMacAddress,
+							&pRPort->PortCheck[i].CheckAddr)) != NULL) {
+						SkEventQueue(pAC, SKGE_DRV, SK_DRV_RLMT_SEND, Para);
+					}
+				}
+			}
+		}
+		else {	/* PortDown -- or all partners suspect. */
+			NewTimeout = SK_RLMT_DEF_TO_VAL;
+		}
+		pRPort->PortNoRx = SK_TRUE;
+	}
+	else {	/* A non-BPDU packet was received. */
+		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+			("SkRlmtCheckPort %d: %d (%d) receives in last time slot.\n",
+				PortNumber,
+				pRPort->PacketsPerTimeSlot - pRPort->BpduPacketsPerTimeSlot,
+				pRPort->PacketsPerTimeSlot))
+		
+		SkRlmtPortReceives(pAC, IoC, PortNumber);
+		if (pAC->Rlmt.CheckSwitch) {
+			SkRlmtCheckSwitch(pAC, IoC, pRPort->Net->NetNumber);
+		}
+
+		NewTimeout = SK_RLMT_DEF_TO_VAL;
+	}
+
+	return (NewTimeout);
+}	/* SkRlmtCheckPort */
+
+
+/******************************************************************************
+ *
+ *	SkRlmtSelectBcRx - select new active port, criteria 1 (CLP)
+ *
+ * Description:
+ *	This routine selects the port that received a broadcast frame
+ *	substantially later than all other ports.
+ *
+ * Context:
+ *	runtime, pageable?
+ *
+ * Returns:
+ *	SK_BOOL
+ */
+RLMT_STATIC SK_BOOL	SkRlmtSelectBcRx(
+SK_AC	*pAC,		/* Adapter Context */
+SK_IOC	IoC,		/* I/O Context */
+SK_U32	Active,		/* Active port */
+SK_U32	PrefPort,	/* Preferred port */
+SK_U32	*pSelect)	/* New active port */
+{
+	SK_U64		BcTimeStamp;
+	SK_U32		i;
+	SK_BOOL		PortFound;
+
+	BcTimeStamp = 0;	/* Not totally necessary, but feeling better. */
+	PortFound = SK_FALSE;
+	
+	/* Select port with the latest TimeStamp. */
+	for (i = 0; i < (SK_U32)pAC->GIni.GIMacsFound; i++) {
+
+		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+			("TimeStamp Port %d (Down: %d, NoRx: %d): %08x %08x.\n",
+				i,
+   				pAC->Rlmt.Port[i].PortDown, pAC->Rlmt.Port[i].PortNoRx,
+				*((SK_U32*)(&pAC->Rlmt.Port[i].BcTimeStamp) + OFFS_HI32),
+				*((SK_U32*)(&pAC->Rlmt.Port[i].BcTimeStamp) + OFFS_LO32)))
+
+		if (!pAC->Rlmt.Port[i].PortDown && !pAC->Rlmt.Port[i].PortNoRx) {
+			if (!PortFound || pAC->Rlmt.Port[i].BcTimeStamp > BcTimeStamp) {
+				BcTimeStamp = pAC->Rlmt.Port[i].BcTimeStamp;
+				*pSelect = i;
+				PortFound = SK_TRUE;
+			}
+		}
+	}
+
+	if (PortFound) {
+		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+			("Port %d received the last broadcast.\n", *pSelect))
+
+		/* Look if another port's time stamp is similar. */
+		for (i = 0; i < (SK_U32)pAC->GIni.GIMacsFound; i++) {
+			if (i == *pSelect) {
+				continue;
+			}
+			if (!pAC->Rlmt.Port[i].PortDown && !pAC->Rlmt.Port[i].PortNoRx &&
+				(pAC->Rlmt.Port[i].BcTimeStamp >
+				 BcTimeStamp - SK_RLMT_BC_DELTA ||
+				pAC->Rlmt.Port[i].BcTimeStamp +
+				 SK_RLMT_BC_DELTA > BcTimeStamp)) {
+				PortFound = SK_FALSE;
+				
+				SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+					("Port %d received a broadcast at a similar time.\n", i))
+				break;
+			}
+		}
+	}
+
+#ifdef DEBUG
+	if (PortFound) {
+		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+			("SK_RLMT_SELECT_BCRX found Port %d receiving the substantially "
+			 "latest broadcast (%u).\n",
+				*pSelect,
+				BcTimeStamp - pAC->Rlmt.Port[1 - *pSelect].BcTimeStamp))
+	}
+#endif	/* DEBUG */
+
+	return (PortFound);
+}	/* SkRlmtSelectBcRx */
+
+
+/******************************************************************************
+ *
+ *	SkRlmtSelectNotSuspect - select new active port, criteria 2 (CLP)
+ *
+ * Description:
+ *	This routine selects a good port (it is PortUp && !SuspectRx).
+ *
+ * Context:
+ *	runtime, pageable?
+ *
+ * Returns:
+ *	SK_BOOL
+ */
+RLMT_STATIC SK_BOOL	SkRlmtSelectNotSuspect(
+SK_AC	*pAC,		/* Adapter Context */
+SK_IOC	IoC,		/* I/O Context */
+SK_U32	Active,		/* Active port */
+SK_U32	PrefPort,	/* Preferred port */
+SK_U32	*pSelect)	/* New active port */
+{
+	SK_U32		i;
+	SK_BOOL		PortFound;
+
+	PortFound = SK_FALSE;
+
+	/* Select first port that is PortUp && !SuspectRx. */
+	for (i = 0; i < (SK_U32)pAC->GIni.GIMacsFound; i++) {
+		if (!pAC->Rlmt.Port[i].PortDown &&
+			!(pAC->Rlmt.Port[i].CheckingState & SK_RLMT_PCS_RX)) {
+			*pSelect = i;
+			if (!pAC->Rlmt.Port[Active].PortDown &&
+				!(pAC->Rlmt.Port[Active].CheckingState & SK_RLMT_PCS_RX)) {
+				*pSelect = Active;
+			}
+			if (!pAC->Rlmt.Port[PrefPort].PortDown &&
+				!(pAC->Rlmt.Port[PrefPort].CheckingState & SK_RLMT_PCS_RX)) {
+				*pSelect = PrefPort;
+			}
+			PortFound = SK_TRUE;
+			SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+				("SK_RLMT_SELECT_NOTSUSPECT found Port %d up and not check RX.\n",
+					*pSelect))
+			break;
+		}
+	}
+	return (PortFound);
+}	/* SkRlmtSelectNotSuspect */
+
+
+/******************************************************************************
+ *
+ *	SkRlmtSelectUp - select new active port, criteria 3, 4 (CLP)
+ *
+ * Description:
+ *	This routine selects a port that is up.
+ *
+ * Context:
+ *	runtime, pageable?
+ *
+ * Returns:
+ *	SK_BOOL
+ */
+RLMT_STATIC SK_BOOL	SkRlmtSelectUp(
+SK_AC	*pAC,			/* Adapter Context */
+SK_IOC	IoC,			/* I/O Context */
+SK_U32	Active,			/* Active port */
+SK_U32	PrefPort,		/* Preferred port */
+SK_U32	*pSelect,		/* New active port */
+SK_BOOL	AutoNegDone)	/* Successfully auto-negotiated? */
+{
+	SK_U32		i;
+	SK_BOOL		PortFound;
+
+	PortFound = SK_FALSE;
+
+	/* Select first port that is PortUp. */
+	for (i = 0; i < (SK_U32)pAC->GIni.GIMacsFound; i++) {
+		if (pAC->Rlmt.Port[i].PortState == SK_RLMT_PS_UP &&
+			pAC->GIni.GP[i].PAutoNegFail != AutoNegDone) {
+			*pSelect = i;
+			if (pAC->Rlmt.Port[Active].PortState == SK_RLMT_PS_UP &&
+				pAC->GIni.GP[Active].PAutoNegFail != AutoNegDone) {
+				*pSelect = Active;
+			}
+			if (pAC->Rlmt.Port[PrefPort].PortState == SK_RLMT_PS_UP &&
+				pAC->GIni.GP[PrefPort].PAutoNegFail != AutoNegDone) {
+				*pSelect = PrefPort;
+			}
+			PortFound = SK_TRUE;
+			SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+				("SK_RLMT_SELECT_UP found Port %d up.\n", *pSelect))
+			break;
+		}
+	}
+	return (PortFound);
+}	/* SkRlmtSelectUp */
+
+
+/******************************************************************************
+ *
+ *	SkRlmtSelectGoingUp - select new active port, criteria 5, 6 (CLP)
+ *
+ * Description:
+ *	This routine selects the port that is going up for the longest time.
+ *
+ * Context:
+ *	runtime, pageable?
+ *
+ * Returns:
+ *	SK_BOOL
+ */
+RLMT_STATIC SK_BOOL	SkRlmtSelectGoingUp(
+SK_AC	*pAC,			/* Adapter Context */
+SK_IOC	IoC,			/* I/O Context */
+SK_U32	Active,			/* Active port */
+SK_U32	PrefPort,		/* Preferred port */
+SK_U32	*pSelect,		/* New active port */
+SK_BOOL	AutoNegDone)	/* Successfully auto-negotiated? */
+{
+	SK_U64		GuTimeStamp;
+	SK_U32		i;
+	SK_BOOL		PortFound;
+
+	GuTimeStamp = 0;
+	PortFound = SK_FALSE;
+
+	/* Select port that is PortGoingUp for the longest time. */
+	for (i = 0; i < (SK_U32)pAC->GIni.GIMacsFound; i++) {
+		if (pAC->Rlmt.Port[i].PortState == SK_RLMT_PS_GOING_UP &&
+			pAC->GIni.GP[i].PAutoNegFail != AutoNegDone) {
+			GuTimeStamp = pAC->Rlmt.Port[i].GuTimeStamp;
+			*pSelect = i;
+			PortFound = SK_TRUE;
+			break;
+		}
+	}
+
+	if (!PortFound) {
+		return (SK_FALSE);
+	}
+
+	for (i = *pSelect + 1; i < (SK_U32)pAC->GIni.GIMacsFound; i++) {
+		if (pAC->Rlmt.Port[i].PortState == SK_RLMT_PS_GOING_UP &&
+			pAC->Rlmt.Port[i].GuTimeStamp < GuTimeStamp &&
+			pAC->GIni.GP[i].PAutoNegFail != AutoNegDone) {
+			GuTimeStamp = pAC->Rlmt.Port[i].GuTimeStamp;
+			*pSelect = i;
+		}
+	}
+
+	SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+		("SK_RLMT_SELECT_GOINGUP found Port %d going up.\n", *pSelect))
+	return (SK_TRUE);
+}	/* SkRlmtSelectGoingUp */
+
+
+/******************************************************************************
+ *
+ *	SkRlmtSelectDown - select new active port, criteria 7, 8 (CLP)
+ *
+ * Description:
+ *	This routine selects a port that is down.
+ *
+ * Context:
+ *	runtime, pageable?
+ *
+ * Returns:
+ *	SK_BOOL
+ */
+RLMT_STATIC SK_BOOL	SkRlmtSelectDown(
+SK_AC	*pAC,			/* Adapter Context */
+SK_IOC	IoC,			/* I/O Context */
+SK_U32	Active,			/* Active port */
+SK_U32	PrefPort,		/* Preferred port */
+SK_U32	*pSelect,		/* New active port */
+SK_BOOL	AutoNegDone)	/* Successfully auto-negotiated? */
+{
+	SK_U32		i;
+	SK_BOOL		PortFound;
+
+	PortFound = SK_FALSE;
+
+	/* Select first port that is PortDown. */
+	for (i = 0; i < (SK_U32)pAC->GIni.GIMacsFound; i++) {
+		if (pAC->Rlmt.Port[i].PortState == SK_RLMT_PS_DOWN &&
+			pAC->GIni.GP[i].PAutoNegFail != AutoNegDone) {
+			*pSelect = i;
+			if (pAC->Rlmt.Port[Active].PortState == SK_RLMT_PS_DOWN &&
+				pAC->GIni.GP[Active].PAutoNegFail != AutoNegDone) {
+				*pSelect = Active;
+			}
+			if (pAC->Rlmt.Port[PrefPort].PortState == SK_RLMT_PS_DOWN &&
+				pAC->GIni.GP[PrefPort].PAutoNegFail != AutoNegDone) {
+				*pSelect = PrefPort;
+			}
+			PortFound = SK_TRUE;
+			SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+				("SK_RLMT_SELECT_DOWN found Port %d down.\n", *pSelect))
+			break;
+		}
+	}
+	return (PortFound);
+}	/* SkRlmtSelectDown */
+
+
+/******************************************************************************
+ *
+ *	SkRlmtCheckSwitch - select new active port and switch to it
+ *
+ * Description:
+ *	This routine decides which port should be the active one and queues
+ *	port switching if necessary.
+ *
+ * Context:
+ *	runtime, pageable?
+ *
+ * Returns:
+ *	Nothing.
+ */
+RLMT_STATIC void	SkRlmtCheckSwitch(
+SK_AC	*pAC,	/* Adapter Context */
+SK_IOC	IoC,	/* I/O Context */
+SK_U32	NetIdx)	/* Net index */
+{
+	SK_EVPARA	Para;
+	SK_U32		Active;
+	SK_U32		PrefPort;
+	SK_U32		i;
+	SK_BOOL		PortFound;
+
+	Active = pAC->Rlmt.Net[NetIdx].ActivePort;	/* Index of active port. */
+	PrefPort = pAC->Rlmt.Net[NetIdx].PrefPort;	/* Index of preferred port. */
+	PortFound = SK_FALSE;
+	pAC->Rlmt.CheckSwitch = SK_FALSE;
+
+#if 0	/* RW 2001/10/18 - active port becomes always prefered one */
+	if (pAC->Rlmt.Net[NetIdx].Preference == 0xFFFFFFFF) { /* Automatic */
+		/* disable auto-fail back */
+		PrefPort = Active;
+	}
+#endif
+
+	if (pAC->Rlmt.Net[NetIdx].LinksUp == 0) {
+		/* Last link went down - shut down the net. */
+		pAC->Rlmt.Net[NetIdx].RlmtState = SK_RLMT_RS_NET_DOWN;
+		Para.Para32[0] = SK_RLMT_NET_DOWN_TEMP;
+		Para.Para32[1] = NetIdx;
+		SkEventQueue(pAC, SKGE_DRV, SK_DRV_NET_DOWN, Para);
+
+		Para.Para32[0] = pAC->Rlmt.Net[NetIdx].
+			Port[pAC->Rlmt.Net[NetIdx].ActivePort]->PortNumber;
+		Para.Para32[1] = NetIdx;
+		SkEventQueue(pAC, SKGE_PNMI, SK_PNMI_EVT_RLMT_ACTIVE_DOWN, Para);
+		return;
+	}	/* pAC->Rlmt.LinksUp == 0 */
+	else if (pAC->Rlmt.Net[NetIdx].LinksUp == 1 &&
+		pAC->Rlmt.Net[NetIdx].RlmtState == SK_RLMT_RS_NET_DOWN) {
+		/* First link came up - get the net up. */
+		pAC->Rlmt.Net[NetIdx].RlmtState = SK_RLMT_RS_NET_UP;
+
+		/*
+		 * If pAC->Rlmt.ActivePort != Para.Para32[0],
+		 * the DRV switches to the port that came up.
+		 */
+		for (i = 0; i < pAC->Rlmt.Net[NetIdx].NumPorts; i++) {
+			if (!pAC->Rlmt.Net[NetIdx].Port[i]->LinkDown) {
+				if (!pAC->Rlmt.Net[NetIdx].Port[Active]->LinkDown) {
+					i = Active;
+				}
+				if (!pAC->Rlmt.Net[NetIdx].Port[PrefPort]->LinkDown) {
+					i = PrefPort;
+				}
+				PortFound = SK_TRUE;
+				break;
+			}
+		}
+
+		if (PortFound) {
+			Para.Para32[0] = pAC->Rlmt.Net[NetIdx].Port[i]->PortNumber;
+			Para.Para32[1] = NetIdx;
+			SkEventQueue(pAC, SKGE_PNMI, SK_PNMI_EVT_RLMT_ACTIVE_UP, Para);
+
+			pAC->Rlmt.Net[NetIdx].ActivePort = i;
+			Para.Para32[0] = pAC->Rlmt.Net[NetIdx].Port[i]->PortNumber;
+			Para.Para32[1] = NetIdx;
+			SkEventQueue(pAC, SKGE_DRV, SK_DRV_NET_UP, Para);
+
+			if ((pAC->Rlmt.Net[NetIdx].RlmtMode & SK_RLMT_TRANSPARENT) == 0 &&
+				(Para.pParaPtr = SkRlmtBuildPacket(pAC, IoC,
+				pAC->Rlmt.Net[NetIdx].Port[i]->PortNumber,
+				SK_PACKET_ANNOUNCE, &pAC->Addr.Net[NetIdx].
+				CurrentMacAddress, &SkRlmtMcAddr)) != NULL) {
+				/*
+				 * Send announce packet to RLMT multicast address to force
+				 * switches to learn the new location of the logical MAC address.
+				 */
+				SkEventQueue(pAC, SKGE_DRV, SK_DRV_RLMT_SEND, Para);
+			}
+		}
+		else {
+			SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_RLMT_E007, SKERR_RLMT_E007_MSG);
+		}
+
+		return;
+	}	/* LinksUp == 1 && RlmtState == SK_RLMT_RS_NET_DOWN */
+	else {	/* Cannot be reached in dual-net mode. */
+		Para.Para32[0] = Active;
+
+		/*
+		 * Preselection:
+		 *	If RLMT Mode != CheckLinkState
+		 *		select port that received a broadcast frame substantially later
+		 *		than all other ports
+		 *	else select first port that is not SuspectRx
+		 *	else select first port that is PortUp
+		 *	else select port that is PortGoingUp for the longest time
+		 *	else select first port that is PortDown
+		 *	else stop.
+		 *
+		 * For the preselected port:
+		 *	If ActivePort is equal in quality, select ActivePort.
+		 *
+		 *	If PrefPort is equal in quality, select PrefPort.
+		 *
+		 *	If ActivePort != SelectedPort,
+		 *		If old ActivePort is LinkDown,
+		 *			SwitchHard
+		 *		else
+		 *			SwitchSoft
+		 */
+		/* check of ChgBcPrio flag added */
+		if ((pAC->Rlmt.Net[0].RlmtMode != SK_RLMT_MODE_CLS) &&
+			(!pAC->Rlmt.Net[0].ChgBcPrio)) {
+			
+			if (!PortFound) {
+				PortFound = SkRlmtSelectBcRx(
+					pAC, IoC, Active, PrefPort, &Para.Para32[1]);
+			}
+
+			if (!PortFound) {
+				PortFound = SkRlmtSelectNotSuspect(
+					pAC, IoC, Active, PrefPort, &Para.Para32[1]);
+			}
+		}	/* pAC->Rlmt.RlmtMode != SK_RLMT_MODE_CLS */
+
+		/* with changed priority for last broadcast received */
+		if ((pAC->Rlmt.Net[0].RlmtMode != SK_RLMT_MODE_CLS) &&
+			(pAC->Rlmt.Net[0].ChgBcPrio)) {
+			if (!PortFound) {
+				PortFound = SkRlmtSelectNotSuspect(
+					pAC, IoC, Active, PrefPort, &Para.Para32[1]);
+			}
+
+			if (!PortFound) {
+				PortFound = SkRlmtSelectBcRx(
+					pAC, IoC, Active, PrefPort, &Para.Para32[1]);
+			}
+		}	/* pAC->Rlmt.RlmtMode != SK_RLMT_MODE_CLS */
+
+		if (!PortFound) {
+			PortFound = SkRlmtSelectUp(
+				pAC, IoC, Active, PrefPort, &Para.Para32[1], AUTONEG_SUCCESS);
+		}
+
+		if (!PortFound) {
+			PortFound = SkRlmtSelectUp(
+				pAC, IoC, Active, PrefPort, &Para.Para32[1], AUTONEG_FAILED);
+		}
+
+		if (!PortFound) {
+			PortFound = SkRlmtSelectGoingUp(
+				pAC, IoC, Active, PrefPort, &Para.Para32[1], AUTONEG_SUCCESS);
+		}
+
+		if (!PortFound) {
+			PortFound = SkRlmtSelectGoingUp(
+				pAC, IoC, Active, PrefPort, &Para.Para32[1], AUTONEG_FAILED);
+		}
+
+		if (pAC->Rlmt.Net[0].RlmtMode != SK_RLMT_MODE_CLS) {
+			if (!PortFound) {
+				PortFound = SkRlmtSelectDown(pAC, IoC,
+					Active, PrefPort, &Para.Para32[1], AUTONEG_SUCCESS);
+			}
+
+			if (!PortFound) {
+				PortFound = SkRlmtSelectDown(pAC, IoC,
+					Active, PrefPort, &Para.Para32[1], AUTONEG_FAILED);
+			}
+		}	/* pAC->Rlmt.RlmtMode != SK_RLMT_MODE_CLS */
+
+		if (PortFound) {
+
+			if (Para.Para32[1] != Active) {
+				SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+					("Active: %d, Para1: %d.\n", Active, Para.Para32[1]))
+				pAC->Rlmt.Net[NetIdx].ActivePort = Para.Para32[1];
+				Para.Para32[0] = pAC->Rlmt.Net[NetIdx].
+					Port[Para.Para32[0]]->PortNumber;
+				Para.Para32[1] = pAC->Rlmt.Net[NetIdx].
+					Port[Para.Para32[1]]->PortNumber;
+				SK_HWAC_LINK_LED(pAC, IoC, Para.Para32[1], SK_LED_ACTIVE);
+				if (pAC->Rlmt.Port[Active].LinkDown) {
+					SkEventQueue(pAC, SKGE_DRV, SK_DRV_SWITCH_HARD, Para);
+				}
+				else {
+					SK_HWAC_LINK_LED(pAC, IoC, Para.Para32[0], SK_LED_STANDBY);
+					SkEventQueue(pAC, SKGE_DRV, SK_DRV_SWITCH_SOFT, Para);
+				}
+				Para.Para32[1] = NetIdx;
+				Para.Para32[0] =
+					pAC->Rlmt.Net[NetIdx].Port[Para.Para32[0]]->PortNumber;
+				SkEventQueue(pAC, SKGE_PNMI, SK_PNMI_EVT_RLMT_ACTIVE_DOWN, Para);
+				Para.Para32[0] = pAC->Rlmt.Net[NetIdx].
+					Port[pAC->Rlmt.Net[NetIdx].ActivePort]->PortNumber;
+				SkEventQueue(pAC, SKGE_PNMI, SK_PNMI_EVT_RLMT_ACTIVE_UP, Para);
+				if ((pAC->Rlmt.Net[NetIdx].RlmtMode & SK_RLMT_TRANSPARENT) == 0 &&
+					(Para.pParaPtr = SkRlmtBuildPacket(pAC, IoC, Para.Para32[0],
+					SK_PACKET_ANNOUNCE, &pAC->Addr.Net[NetIdx].CurrentMacAddress,
+					&SkRlmtMcAddr)) != NULL) {
+					/*
+					 * Send announce packet to RLMT multicast address to force
+					 * switches to learn the new location of the logical
+					 * MAC address.
+					 */
+					SkEventQueue(pAC, SKGE_DRV, SK_DRV_RLMT_SEND, Para);
+				}	/* (Para.pParaPtr = SkRlmtBuildPacket(...)) != NULL */
+			}	/* Para.Para32[1] != Active */
+		}	/* PortFound */
+		else {
+			SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_RLMT_E004, SKERR_RLMT_E004_MSG);
+		}
+	}	/* LinksUp > 1 || LinksUp == 1 && RlmtState != SK_RLMT_RS_NET_DOWN */
+	return;
+}	/* SkRlmtCheckSwitch */
+
+
+/******************************************************************************
+ *
+ *	SkRlmtCheckSeg - Report if segmentation is detected
+ *
+ * Description:
+ *	This routine checks if the ports see different root bridges and reports
+ *	segmentation in such a case.
+ *
+ * Context:
+ *	runtime, pageable?
+ *
+ * Returns:
+ *	Nothing.
+ */
+RLMT_STATIC void	SkRlmtCheckSeg(
+SK_AC	*pAC,	/* Adapter Context */
+SK_IOC	IoC,	/* I/O Context */
+SK_U32	NetIdx)	/* Net number */
+{
+	SK_EVPARA	Para;
+	SK_RLMT_NET	*pNet;
+	SK_U32		i, j;
+	SK_BOOL		Equal;
+
+	pNet = &pAC->Rlmt.Net[NetIdx];
+	pNet->RootIdSet = SK_FALSE;
+	Equal = SK_TRUE;
+
+	for (i = 0; i < pNet->NumPorts; i++) {
+		if (pNet->Port[i]->LinkDown || !pNet->Port[i]->RootIdSet) {
+			continue;
+		}
+
+		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_DUMP,
+			("Root ID %d: %02x %02x %02x %02x %02x %02x %02x %02x.\n", i,
+				pNet->Port[i]->Root.Id[0], pNet->Port[i]->Root.Id[1],
+				pNet->Port[i]->Root.Id[2], pNet->Port[i]->Root.Id[3],
+				pNet->Port[i]->Root.Id[4], pNet->Port[i]->Root.Id[5],
+				pNet->Port[i]->Root.Id[6], pNet->Port[i]->Root.Id[7]))
+
+		if (!pNet->RootIdSet) {
+			pNet->Root = pNet->Port[i]->Root;
+			pNet->RootIdSet = SK_TRUE;
+			continue;
+		}
+
+		for (j = 0; j < 8; j ++) {
+			Equal &= pNet->Port[i]->Root.Id[j] == pNet->Root.Id[j];
+			if (!Equal) {
+				break;
+			}
+		}
+		
+		if (!Equal) {
+			SK_ERR_LOG(pAC, SK_ERRCL_COMM, SKERR_RLMT_E005, SKERR_RLMT_E005_MSG);
+			Para.Para32[0] = NetIdx;
+			Para.Para32[1] = (SK_U32)-1;
+			SkEventQueue(pAC, SKGE_PNMI, SK_PNMI_EVT_RLMT_SEGMENTATION, Para);
+
+			pNet->CheckingState &= ~SK_RLMT_RCS_REPORT_SEG;
+
+			/* 2000-03-06 RA: New. */
+			Para.Para32[0] = NetIdx;
+			Para.Para32[1] = (SK_U32)-1;
+			SkTimerStart(pAC, IoC, &pNet->SegTimer, SK_RLMT_SEG_TO_VAL,
+				SKGE_RLMT, SK_RLMT_SEG_TIM, Para);
+			break;
+		}
+	}	/* for (i = 0; i < pNet->NumPorts; i++) */
+
+	/* 2000-03-06 RA: Moved here. */
+	/* Segmentation check not running anymore. */
+	pNet->CheckingState &= ~SK_RLMT_RCS_SEG;
+
+}	/* SkRlmtCheckSeg */
+
+
+/******************************************************************************
+ *
+ *	SkRlmtPortStart - initialize port variables and start port
+ *
+ * Description:
+ *	This routine initializes a port's variables and issues a PORT_START
+ *	to the HWAC module.  This handles retries if the start fails or the
+ *	link eventually goes down.
+ *
+ * Context:
+ *	runtime, pageable?
+ *
+ * Returns:
+ *	Nothing
+ */
+RLMT_STATIC void	SkRlmtPortStart(
+SK_AC	*pAC,		/* Adapter Context */
+SK_IOC	IoC,		/* I/O Context */
+SK_U32	PortNumber)	/* Port number */
+{
+	SK_EVPARA	Para;
+
+	pAC->Rlmt.Port[PortNumber].PortState = SK_RLMT_PS_LINK_DOWN;
+	pAC->Rlmt.Port[PortNumber].PortStarted = SK_TRUE;
+	pAC->Rlmt.Port[PortNumber].LinkDown = SK_TRUE;
+	pAC->Rlmt.Port[PortNumber].PortDown = SK_TRUE;
+	pAC->Rlmt.Port[PortNumber].CheckingState = 0;
+	pAC->Rlmt.Port[PortNumber].RootIdSet = SK_FALSE;
+	Para.Para32[0] = PortNumber;
+	Para.Para32[1] = (SK_U32)-1;
+	SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_START, Para);
+}	/* SkRlmtPortStart */
+
+
+/******************************************************************************
+ *
+ *	SkRlmtEvtPortStartTim - PORT_START_TIM
+ *
+ * Description:
+ *	This routine handles PORT_START_TIM events.
+ *
+ * Context:
+ *	runtime, pageable?
+ *	may be called after SK_INIT_IO
+ *
+ * Returns:
+ *	Nothing
+ */
+RLMT_STATIC void	SkRlmtEvtPortStartTim(
+SK_AC		*pAC,	/* Adapter Context */
+SK_IOC		IoC,	/* I/O Context */
+SK_EVPARA	Para)	/* SK_U32 PortNumber; SK_U32 -1 */
+{
+	SK_U32			i;
+
+	SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+		("SK_RLMT_PORTSTART_TIMEOUT Port %d Event BEGIN.\n", Para.Para32[0]))
+
+		if (Para.Para32[1] != (SK_U32)-1) {
+		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+			("Bad Parameter.\n"))
+		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+			("SK_RLMT_PORTSTART_TIMEOUT Event EMPTY.\n"))
+		return;
+	}
+
+	/*
+	 * Used to start non-preferred ports if the preferred one
+	 * does not come up.
+	 * This timeout needs only be set when starting the first
+	 * (preferred) port.
+	 */
+	if (pAC->Rlmt.Port[Para.Para32[0]].LinkDown) {
+		/* PORT_START failed. */
+		for (i = 0; i < pAC->Rlmt.Port[Para.Para32[0]].Net->NumPorts; i++) {
+			if (!pAC->Rlmt.Port[Para.Para32[0]].Net->Port[i]->PortStarted) {
+				SkRlmtPortStart(pAC, IoC,
+					pAC->Rlmt.Port[Para.Para32[0]].Net->Port[i]->PortNumber);
+			}
+		}
+	}
+
+	SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+		("SK_RLMT_PORTSTART_TIMEOUT Event END.\n"))
+}	/* SkRlmtEvtPortStartTim */
+
+
+/******************************************************************************
+ *
+ *	SkRlmtEvtLinkUp - LINK_UP
+ *
+ * Description:
+ *	This routine handles LLINK_UP events.
+ *
+ * Context:
+ *	runtime, pageable?
+ *	may be called after SK_INIT_IO
+ *
+ * Returns:
+ *	Nothing
+ */
+RLMT_STATIC void	SkRlmtEvtLinkUp(
+SK_AC		*pAC,	/* Adapter Context */
+SK_IOC		IoC,	/* I/O Context */
+SK_EVPARA	Para)	/* SK_U32 PortNumber; SK_U32 Undefined */
+{
+	SK_U32			i;
+	SK_RLMT_PORT	*pRPort;
+	SK_EVPARA		Para2;
+
+	SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+		("SK_RLMT_LINK_UP Port %d Event BEGIN.\n", Para.Para32[0]))
+
+	pRPort = &pAC->Rlmt.Port[Para.Para32[0]];
+	if (!pRPort->PortStarted) {
+		SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_RLMT_E008, SKERR_RLMT_E008_MSG);
+
+		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+				("SK_RLMT_LINK_UP Event EMPTY.\n"))
+		return;
+	}
+
+	if (!pRPort->LinkDown) {
+		/* RA;:;: Any better solution? */
+		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+			("SK_RLMT_LINK_UP Event EMPTY.\n"))
+		return;
+	}
+
+	SkTimerStop(pAC, IoC, &pRPort->UpTimer);
+	SkTimerStop(pAC, IoC, &pRPort->DownRxTimer);
+	SkTimerStop(pAC, IoC, &pRPort->DownTxTimer);
+
+	/* Do something if timer already fired? */
+
+	pRPort->LinkDown = SK_FALSE;
+	pRPort->PortState = SK_RLMT_PS_GOING_UP;
+	pRPort->GuTimeStamp = SkOsGetTime(pAC);
+	pRPort->BcTimeStamp = 0;
+	pRPort->Net->LinksUp++;
+	if (pRPort->Net->LinksUp == 1) {
+		SK_HWAC_LINK_LED(pAC, IoC, Para.Para32[0], SK_LED_ACTIVE);
+	}
+	else {
+		SK_HWAC_LINK_LED(pAC, IoC, Para.Para32[0], SK_LED_STANDBY);
+	}
+
+	for (i = 0; i < pRPort->Net->NumPorts; i++) {
+		if (!pRPort->Net->Port[i]->PortStarted) {
+			SkRlmtPortStart(pAC, IoC, pRPort->Net->Port[i]->PortNumber);
+		}
+	}
+
+	SkRlmtCheckSwitch(pAC, IoC, pRPort->Net->NetNumber);
+
+	if (pRPort->Net->LinksUp >= 2) {
+		if (pRPort->Net->RlmtMode & SK_RLMT_CHECK_LOC_LINK) {
+			/* Build the check chain. */
+			SkRlmtBuildCheckChain(pAC, pRPort->Net->NetNumber);
+		}
+	}
+
+	/* If the first link comes up, start the periodical RLMT timeout. */
+	if (pRPort->Net->NumPorts > 1 && pRPort->Net->LinksUp == 1 &&
+		(pRPort->Net->RlmtMode & SK_RLMT_CHECK_OTHERS) != 0) {
+		Para2.Para32[0] = pRPort->Net->NetNumber;
+		Para2.Para32[1] = (SK_U32)-1;
+		SkTimerStart(pAC, IoC, &pRPort->Net->LocTimer,
+			pRPort->Net->TimeoutValue, SKGE_RLMT, SK_RLMT_TIM, Para2);
+	}
+
+	Para2 = Para;
+	Para2.Para32[1] = (SK_U32)-1;
+	SkTimerStart(pAC, IoC, &pRPort->UpTimer, SK_RLMT_PORTUP_TIM_VAL,
+		SKGE_RLMT, SK_RLMT_PORTUP_TIM, Para2);
+	
+	/* Later: if (pAC->Rlmt.RlmtMode & SK_RLMT_CHECK_LOC_LINK) && */
+	if ((pRPort->Net->RlmtMode & SK_RLMT_TRANSPARENT) == 0 &&
+		(pRPort->Net->RlmtMode & SK_RLMT_CHECK_LINK) != 0 &&
+		(Para2.pParaPtr =
+			SkRlmtBuildPacket(pAC, IoC, Para.Para32[0], SK_PACKET_ANNOUNCE,
+			&pAC->Addr.Port[Para.Para32[0]].CurrentMacAddress, &SkRlmtMcAddr)
+		) != NULL) {
+		/* Send "new" packet to RLMT multicast address. */
+		SkEventQueue(pAC, SKGE_DRV, SK_DRV_RLMT_SEND, Para2);
+	}
+
+	if (pRPort->Net->RlmtMode & SK_RLMT_CHECK_SEG) {
+		if ((Para2.pParaPtr =
+			SkRlmtBuildSpanningTreePacket(pAC, IoC, Para.Para32[0])) != NULL) {
+			pAC->Rlmt.Port[Para.Para32[0]].RootIdSet = SK_FALSE;
+			pRPort->Net->CheckingState |=
+				SK_RLMT_RCS_SEG | SK_RLMT_RCS_REPORT_SEG;
+
+			SkEventQueue(pAC, SKGE_DRV, SK_DRV_RLMT_SEND, Para2);
+
+			Para.Para32[1] = (SK_U32)-1;
+			SkTimerStart(pAC, IoC, &pRPort->Net->SegTimer,
+				SK_RLMT_SEG_TO_VAL, SKGE_RLMT, SK_RLMT_SEG_TIM, Para);
+		}
+	}
+
+	SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+		("SK_RLMT_LINK_UP Event END.\n"))
+}	/* SkRlmtEvtLinkUp */
+
+
+/******************************************************************************
+ *
+ *	SkRlmtEvtPortUpTim - PORT_UP_TIM
+ *
+ * Description:
+ *	This routine handles PORT_UP_TIM events.
+ *
+ * Context:
+ *	runtime, pageable?
+ *	may be called after SK_INIT_IO
+ *
+ * Returns:
+ *	Nothing
+ */
+RLMT_STATIC void	SkRlmtEvtPortUpTim(
+SK_AC		*pAC,	/* Adapter Context */
+SK_IOC		IoC,	/* I/O Context */
+SK_EVPARA	Para)	/* SK_U32 PortNumber; SK_U32 -1 */
+{
+	SK_RLMT_PORT	*pRPort;
+
+	SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+		("SK_RLMT_PORTUP_TIM Port %d Event BEGIN.\n", Para.Para32[0]))
+
+	if (Para.Para32[1] != (SK_U32)-1) {
+		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+			("Bad Parameter.\n"))
+		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+			("SK_RLMT_PORTUP_TIM Event EMPTY.\n"))
+		return;
+	}
+
+	pRPort = &pAC->Rlmt.Port[Para.Para32[0]];
+	if (pRPort->LinkDown || (pRPort->PortState == SK_RLMT_PS_UP)) {
+		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+			("SK_RLMT_PORTUP_TIM Port %d Event EMPTY.\n", Para.Para32[0]))
+		return;
+	}
+
+	pRPort->PortDown = SK_FALSE;
+	pRPort->PortState = SK_RLMT_PS_UP;
+	pRPort->Net->PortsUp++;
+	if (pRPort->Net->RlmtState != SK_RLMT_RS_INIT) {
+		if (pAC->Rlmt.NumNets <= 1) {
+			SkRlmtCheckSwitch(pAC, IoC, pRPort->Net->NetNumber);
+		}
+		SkEventQueue(pAC, SKGE_PNMI, SK_PNMI_EVT_RLMT_PORT_UP, Para);
+	}
+
+	SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+		("SK_RLMT_PORTUP_TIM Event END.\n"))
+}	/* SkRlmtEvtPortUpTim */
+
+
+/******************************************************************************
+ *
+ *	SkRlmtEvtPortDownTim - PORT_DOWN_*
+ *
+ * Description:
+ *	This routine handles PORT_DOWN_* events.
+ *
+ * Context:
+ *	runtime, pageable?
+ *	may be called after SK_INIT_IO
+ *
+ * Returns:
+ *	Nothing
+ */
+RLMT_STATIC void	SkRlmtEvtPortDownX(
+SK_AC		*pAC,	/* Adapter Context */
+SK_IOC		IoC,	/* I/O Context */
+SK_U32		Event,	/* Event code */
+SK_EVPARA	Para)	/* SK_U32 PortNumber; SK_U32 -1 */
+{
+	SK_RLMT_PORT	*pRPort;
+
+	SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+		("SK_RLMT_PORTDOWN* Port %d Event (%d) BEGIN.\n",
+			Para.Para32[0], Event))
+
+	if (Para.Para32[1] != (SK_U32)-1) {
+		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+			("Bad Parameter.\n"))
+		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+			("SK_RLMT_PORTDOWN* Event EMPTY.\n"))
+		return;
+	}
+
+	pRPort = &pAC->Rlmt.Port[Para.Para32[0]];
+	if (!pRPort->PortStarted || (Event == SK_RLMT_PORTDOWN_TX_TIM &&
+		!(pRPort->CheckingState & SK_RLMT_PCS_TX))) {
+		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+			("SK_RLMT_PORTDOWN* Event (%d) EMPTY.\n", Event))
+		return;
+	}
+	
+	/* Stop port's timers. */
+	SkTimerStop(pAC, IoC, &pRPort->UpTimer);
+	SkTimerStop(pAC, IoC, &pRPort->DownRxTimer);
+	SkTimerStop(pAC, IoC, &pRPort->DownTxTimer);
+
+	if (pRPort->PortState != SK_RLMT_PS_LINK_DOWN) {
+		pRPort->PortState = SK_RLMT_PS_DOWN;
+	}
+
+	if (!pRPort->PortDown) {
+		pRPort->Net->PortsUp--;
+		pRPort->PortDown = SK_TRUE;
+		SkEventQueue(pAC, SKGE_PNMI, SK_PNMI_EVT_RLMT_PORT_DOWN, Para);
+	}
+
+	pRPort->PacketsPerTimeSlot = 0;
+	/* pRPort->DataPacketsPerTimeSlot = 0; */
+	pRPort->BpduPacketsPerTimeSlot = 0;
+	pRPort->BcTimeStamp = 0;
+
+	/*
+	 * RA;:;: To be checked:
+	 * - actions at RLMT_STOP: We should not switch anymore.
+	 */
+	if (pRPort->Net->RlmtState != SK_RLMT_RS_INIT) {
+		if (Para.Para32[0] ==
+			pRPort->Net->Port[pRPort->Net->ActivePort]->PortNumber) {
+			/* Active Port went down. */
+			SkRlmtCheckSwitch(pAC, IoC, pRPort->Net->NetNumber);
+		}
+	}
+
+	SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+		("SK_RLMT_PORTDOWN* Event (%d) END.\n", Event))
+}	/* SkRlmtEvtPortDownX */
+
+
+/******************************************************************************
+ *
+ *	SkRlmtEvtLinkDown - LINK_DOWN
+ *
+ * Description:
+ *	This routine handles LINK_DOWN events.
+ *
+ * Context:
+ *	runtime, pageable?
+ *	may be called after SK_INIT_IO
+ *
+ * Returns:
+ *	Nothing
+ */
+RLMT_STATIC void	SkRlmtEvtLinkDown(
+SK_AC		*pAC,	/* Adapter Context */
+SK_IOC		IoC,	/* I/O Context */
+SK_EVPARA	Para)	/* SK_U32 PortNumber; SK_U32 Undefined */
+{
+	SK_RLMT_PORT	*pRPort;
+
+	pRPort = &pAC->Rlmt.Port[Para.Para32[0]];
+	SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+		("SK_RLMT_LINK_DOWN Port %d Event BEGIN.\n", Para.Para32[0]))
+
+	if (!pAC->Rlmt.Port[Para.Para32[0]].LinkDown) {
+		pRPort->Net->LinksUp--;
+		pRPort->LinkDown = SK_TRUE;
+		pRPort->PortState = SK_RLMT_PS_LINK_DOWN;
+		SK_HWAC_LINK_LED(pAC, IoC, Para.Para32[0], SK_LED_OFF);
+
+		if ((pRPort->Net->RlmtMode & SK_RLMT_CHECK_LOC_LINK) != 0) {
+			/* Build the check chain. */
+			SkRlmtBuildCheckChain(pAC, pRPort->Net->NetNumber);
+		}
+
+		/* Ensure that port is marked down. */
+		Para.Para32[1] = -1;
+		(void)SkRlmtEvent(pAC, IoC, SK_RLMT_PORTDOWN, Para);
+	}
+
+	SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+		("SK_RLMT_LINK_DOWN Event END.\n"))
+}	/* SkRlmtEvtLinkDown */
+
+
+/******************************************************************************
+ *
+ *	SkRlmtEvtPortAddr - PORT_ADDR
+ *
+ * Description:
+ *	This routine handles PORT_ADDR events.
+ *
+ * Context:
+ *	runtime, pageable?
+ *	may be called after SK_INIT_IO
+ *
+ * Returns:
+ *	Nothing
+ */
+RLMT_STATIC void	SkRlmtEvtPortAddr(
+SK_AC		*pAC,	/* Adapter Context */
+SK_IOC		IoC,	/* I/O Context */
+SK_EVPARA	Para)	/* SK_U32 PortNumber; SK_U32 -1 */
+{
+	SK_U32			i, j;
+	SK_RLMT_PORT	*pRPort;
+	SK_MAC_ADDR		*pOldMacAddr;
+	SK_MAC_ADDR		*pNewMacAddr;
+
+	SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+		("SK_RLMT_PORT_ADDR Port %d Event BEGIN.\n", Para.Para32[0]))
+
+	if (Para.Para32[1] != (SK_U32)-1) {
+		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+			("Bad Parameter.\n"))
+		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+			("SK_RLMT_PORT_ADDR Event EMPTY.\n"))
+		return;
+	}
+
+	/* Port's physical MAC address changed. */
+	pOldMacAddr = &pAC->Addr.Port[Para.Para32[0]].PreviousMacAddress;
+	pNewMacAddr = &pAC->Addr.Port[Para.Para32[0]].CurrentMacAddress;
+
+	/*
+	 * NOTE: This is not scalable for solutions where ports are
+	 *	 checked remotely.  There, we need to send an RLMT
+	 *	 address change packet - and how do we ensure delivery?
+	 */
+	for (i = 0; i < (SK_U32)pAC->GIni.GIMacsFound; i++) {
+		pRPort = &pAC->Rlmt.Port[i];
+		for (j = 0; j < pRPort->PortsChecked; j++) {
+			if (SK_ADDR_EQUAL(
+				pRPort->PortCheck[j].CheckAddr.a, pOldMacAddr->a)) {
+				pRPort->PortCheck[j].CheckAddr = *pNewMacAddr;
+			}
+		}
+	}
+
+	SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+			("SK_RLMT_PORT_ADDR Event END.\n"))
+}	/* SkRlmtEvtPortAddr */
+
+
+/******************************************************************************
+ *
+ *	SkRlmtEvtStart - START
+ *
+ * Description:
+ *	This routine handles START events.
+ *
+ * Context:
+ *	runtime, pageable?
+ *	may be called after SK_INIT_IO
+ *
+ * Returns:
+ *	Nothing
+ */
+RLMT_STATIC void	SkRlmtEvtStart(
+SK_AC		*pAC,	/* Adapter Context */
+SK_IOC		IoC,	/* I/O Context */
+SK_EVPARA	Para)	/* SK_U32 NetNumber; SK_U32 -1 */
+{
+	SK_EVPARA	Para2;
+	SK_U32		PortIdx;
+	SK_U32		PortNumber;
+
+	SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+		("SK_RLMT_START Net %d Event BEGIN.\n", Para.Para32[0]))
+
+	if (Para.Para32[1] != (SK_U32)-1) {
+		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+			("Bad Parameter.\n"))
+		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+			("SK_RLMT_START Event EMPTY.\n"))
+		return;
+	}
+
+	if (Para.Para32[0] >= pAC->Rlmt.NumNets) {
+		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+			("Bad NetNumber %d.\n", Para.Para32[0]))
+		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+			("SK_RLMT_START Event EMPTY.\n"))
+		return;
+	}
+
+	if (pAC->Rlmt.Net[Para.Para32[0]].RlmtState != SK_RLMT_RS_INIT) {
+		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+			("SK_RLMT_START Event EMPTY.\n"))
+		return;
+	}
+
+	if (pAC->Rlmt.NetsStarted >= pAC->Rlmt.NumNets) {
+		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+			("All nets should have been started.\n"))
+		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+			("SK_RLMT_START Event EMPTY.\n"))
+		return;
+	}
+
+	if (pAC->Rlmt.Net[Para.Para32[0]].PrefPort >=
+		pAC->Rlmt.Net[Para.Para32[0]].NumPorts) {
+		SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_RLMT_E009, SKERR_RLMT_E009_MSG);
+
+		/* Change PrefPort to internal default. */
+		Para2.Para32[0] = 0xFFFFFFFF;
+		Para2.Para32[1] = Para.Para32[0];
+		(void)SkRlmtEvent(pAC, IoC, SK_RLMT_PREFPORT_CHANGE, Para2);
+	}
+
+	PortIdx = pAC->Rlmt.Net[Para.Para32[0]].PrefPort;
+	PortNumber = pAC->Rlmt.Net[Para.Para32[0]].Port[PortIdx]->PortNumber;
+
+	pAC->Rlmt.Net[Para.Para32[0]].LinksUp = 0;
+	pAC->Rlmt.Net[Para.Para32[0]].PortsUp = 0;
+	pAC->Rlmt.Net[Para.Para32[0]].CheckingState = 0;
+	pAC->Rlmt.Net[Para.Para32[0]].RlmtState = SK_RLMT_RS_NET_DOWN;
+
+	/* Start preferred port. */
+	SkRlmtPortStart(pAC, IoC, PortNumber);
+
+	/* Start Timer (for first port only). */
+	Para2.Para32[0] = PortNumber;
+	Para2.Para32[1] = (SK_U32)-1;
+	SkTimerStart(pAC, IoC, &pAC->Rlmt.Port[PortNumber].UpTimer,
+		SK_RLMT_PORTSTART_TIM_VAL, SKGE_RLMT, SK_RLMT_PORTSTART_TIM, Para2);
+
+	pAC->Rlmt.NetsStarted++;
+
+	SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+			("SK_RLMT_START Event END.\n"))
+}	/* SkRlmtEvtStart */
+
+
+/******************************************************************************
+ *
+ *	SkRlmtEvtStop - STOP
+ *
+ * Description:
+ *	This routine handles STOP events.
+ *
+ * Context:
+ *	runtime, pageable?
+ *	may be called after SK_INIT_IO
+ *
+ * Returns:
+ *	Nothing
+ */
+RLMT_STATIC void	SkRlmtEvtStop(
+SK_AC		*pAC,	/* Adapter Context */
+SK_IOC		IoC,	/* I/O Context */
+SK_EVPARA	Para)	/* SK_U32 NetNumber; SK_U32 -1 */
+{
+	SK_EVPARA	Para2;
+	SK_U32		PortNumber;
+	SK_U32		i;
+
+	SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+		("SK_RLMT_STOP Net %d Event BEGIN.\n", Para.Para32[0]))
+
+	if (Para.Para32[1] != (SK_U32)-1) {
+		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+			("Bad Parameter.\n"))
+		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+			("SK_RLMT_STOP Event EMPTY.\n"))
+		return;
+	}
+
+	if (Para.Para32[0] >= pAC->Rlmt.NumNets) {
+		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+			("Bad NetNumber %d.\n", Para.Para32[0]))
+		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+			("SK_RLMT_STOP Event EMPTY.\n"))
+		return;
+	}
+
+	if (pAC->Rlmt.Net[Para.Para32[0]].RlmtState == SK_RLMT_RS_INIT) {
+		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+			("SK_RLMT_STOP Event EMPTY.\n"))
+		return;
+	}
+
+	if (pAC->Rlmt.NetsStarted == 0) {
+		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+			("All nets are stopped.\n"))
+		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+			("SK_RLMT_STOP Event EMPTY.\n"))
+		return;
+	}
+
+	/* Stop RLMT timers. */
+	SkTimerStop(pAC, IoC, &pAC->Rlmt.Net[Para.Para32[0]].LocTimer);
+	SkTimerStop(pAC, IoC, &pAC->Rlmt.Net[Para.Para32[0]].SegTimer);
+
+	/* Stop net. */
+	pAC->Rlmt.Net[Para.Para32[0]].RlmtState = SK_RLMT_RS_INIT;
+	pAC->Rlmt.Net[Para.Para32[0]].RootIdSet = SK_FALSE;
+	Para2.Para32[0] = SK_RLMT_NET_DOWN_FINAL;
+	Para2.Para32[1] = Para.Para32[0];			/* Net# */
+	SkEventQueue(pAC, SKGE_DRV, SK_DRV_NET_DOWN, Para2);
+
+	/* Stop ports. */
+	for (i = 0; i < pAC->Rlmt.Net[Para.Para32[0]].NumPorts; i++) {
+		PortNumber = pAC->Rlmt.Net[Para.Para32[0]].Port[i]->PortNumber;
+		if (pAC->Rlmt.Port[PortNumber].PortState != SK_RLMT_PS_INIT) {
+			SkTimerStop(pAC, IoC, &pAC->Rlmt.Port[PortNumber].UpTimer);
+			SkTimerStop(pAC, IoC, &pAC->Rlmt.Port[PortNumber].DownRxTimer);
+			SkTimerStop(pAC, IoC, &pAC->Rlmt.Port[PortNumber].DownTxTimer);
+
+			pAC->Rlmt.Port[PortNumber].PortState = SK_RLMT_PS_INIT;
+			pAC->Rlmt.Port[PortNumber].RootIdSet = SK_FALSE;
+			pAC->Rlmt.Port[PortNumber].PortStarted = SK_FALSE;
+			Para2.Para32[0] = PortNumber;
+			Para2.Para32[1] = (SK_U32)-1;
+			SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_STOP, Para2);
+		}
+	}
+
+	pAC->Rlmt.NetsStarted--;
+
+	SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+		("SK_RLMT_STOP Event END.\n"))
+}	/* SkRlmtEvtStop */
+
+
+/******************************************************************************
+ *
+ *	SkRlmtEvtTim - TIM
+ *
+ * Description:
+ *	This routine handles TIM events.
+ *
+ * Context:
+ *	runtime, pageable?
+ *	may be called after SK_INIT_IO
+ *
+ * Returns:
+ *	Nothing
+ */
+RLMT_STATIC void	SkRlmtEvtTim(
+SK_AC		*pAC,	/* Adapter Context */
+SK_IOC		IoC,	/* I/O Context */
+SK_EVPARA	Para)	/* SK_U32 NetNumber; SK_U32 -1 */
+{
+	SK_RLMT_PORT	*pRPort;
+	SK_U32			Timeout;
+	SK_U32			NewTimeout;
+	SK_U32			PortNumber;
+	SK_U32			i;
+
+	SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+		("SK_RLMT_TIM Event BEGIN.\n"))
+
+	if (Para.Para32[1] != (SK_U32)-1) {
+		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+			("Bad Parameter.\n"))
+		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+			("SK_RLMT_TIM Event EMPTY.\n"))
+		return;
+	}
+
+	if ((pAC->Rlmt.Net[Para.Para32[0]].RlmtMode & SK_RLMT_CHECK_OTHERS) == 0 ||
+		pAC->Rlmt.Net[Para.Para32[0]].LinksUp == 0) {
+		/* Mode changed or all links down: No more link checking. */
+		return;
+	}
+
+#if 0
+	pAC->Rlmt.SwitchCheckCounter--;
+	if (pAC->Rlmt.SwitchCheckCounter == 0) {
+		pAC->Rlmt.SwitchCheckCounter;
+	}
+#endif	/* 0 */
+
+	NewTimeout = SK_RLMT_DEF_TO_VAL;
+	for (i = 0; i < pAC->Rlmt.Net[Para.Para32[0]].NumPorts; i++) {
+		PortNumber = pAC->Rlmt.Net[Para.Para32[0]].Port[i]->PortNumber;
+		pRPort = &pAC->Rlmt.Port[PortNumber];
+		if (!pRPort->LinkDown) {
+			Timeout = SkRlmtCheckPort(pAC, IoC, PortNumber);
+			if (Timeout < NewTimeout) {
+				NewTimeout = Timeout;
+			}
+
+			/*
+			 * These counters should be set to 0 for all ports before the
+			 * first frame is sent in the next loop.
+			 */
+			pRPort->PacketsPerTimeSlot = 0;
+			/* pRPort->DataPacketsPerTimeSlot = 0; */
+			pRPort->BpduPacketsPerTimeSlot = 0;
+		}
+	}
+	pAC->Rlmt.Net[Para.Para32[0]].TimeoutValue = NewTimeout;
+
+	if (pAC->Rlmt.Net[Para.Para32[0]].LinksUp > 1) {
+		/*
+		 * If checking remote ports, also send packets if
+		 *   (LinksUp == 1) &&
+		 *   this port checks at least one (remote) port.
+		 */
+
+		/*
+		 * Must be new loop, as SkRlmtCheckPort can request to
+		 * check segmentation when e.g. checking the last port.
+		 */
+		for (i = 0; i < pAC->Rlmt.Net[Para.Para32[0]].NumPorts; i++) {
+			if (!pAC->Rlmt.Net[Para.Para32[0]].Port[i]->LinkDown) {
+				SkRlmtSend(pAC, IoC,
+					pAC->Rlmt.Net[Para.Para32[0]].Port[i]->PortNumber);
+			}
+		}
+	}
+
+	SkTimerStart(pAC, IoC, &pAC->Rlmt.Net[Para.Para32[0]].LocTimer,
+		pAC->Rlmt.Net[Para.Para32[0]].TimeoutValue, SKGE_RLMT, SK_RLMT_TIM,
+		Para);
+
+	if (pAC->Rlmt.Net[Para.Para32[0]].LinksUp > 1 &&
+		(pAC->Rlmt.Net[Para.Para32[0]].RlmtMode & SK_RLMT_CHECK_SEG) &&
+		(pAC->Rlmt.Net[Para.Para32[0]].CheckingState & SK_RLMT_RCS_START_SEG)) {
+		SkTimerStart(pAC, IoC, &pAC->Rlmt.Net[Para.Para32[0]].SegTimer,
+			SK_RLMT_SEG_TO_VAL, SKGE_RLMT, SK_RLMT_SEG_TIM, Para);
+		pAC->Rlmt.Net[Para.Para32[0]].CheckingState &= ~SK_RLMT_RCS_START_SEG;
+		pAC->Rlmt.Net[Para.Para32[0]].CheckingState |=
+			SK_RLMT_RCS_SEG | SK_RLMT_RCS_REPORT_SEG;
+	}
+
+	SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+			("SK_RLMT_TIM Event END.\n"))
+}	/* SkRlmtEvtTim */
+
+
+/******************************************************************************
+ *
+ *	SkRlmtEvtSegTim - SEG_TIM
+ *
+ * Description:
+ *	This routine handles SEG_TIM events.
+ *
+ * Context:
+ *	runtime, pageable?
+ *	may be called after SK_INIT_IO
+ *
+ * Returns:
+ *	Nothing
+ */
+RLMT_STATIC void	SkRlmtEvtSegTim(
+SK_AC		*pAC,	/* Adapter Context */
+SK_IOC		IoC,	/* I/O Context */
+SK_EVPARA	Para)	/* SK_U32 NetNumber; SK_U32 -1 */
+{
+#ifdef xDEBUG
+	int j;
+#endif	/* DEBUG */
+
+	SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+		("SK_RLMT_SEG_TIM Event BEGIN.\n"))
+
+	if (Para.Para32[1] != (SK_U32)-1) {
+		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+			("Bad Parameter.\n"))
+		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+			("SK_RLMT_SEG_TIM Event EMPTY.\n"))
+		return;
+	}
+
+#ifdef xDEBUG
+	for (j = 0; j < pAC->Rlmt.Net[Para.Para32[0]].NumPorts; j++) {
+		SK_ADDR_PORT	*pAPort;
+		SK_U32			k;
+		SK_U16			*InAddr;
+		SK_U8			InAddr8[6];
+
+		InAddr = (SK_U16 *)&InAddr8[0];
+		pAPort = pAC->Rlmt.Net[Para.Para32[0]].Port[j]->AddrPort;
+		for (k = 0; k < pAPort->NextExactMatchRlmt; k++) {
+			/* Get exact match address k from port j. */
+			XM_INADDR(IoC, pAC->Rlmt.Net[Para.Para32[0]].Port[j]->PortNumber,
+				XM_EXM(k), InAddr);
+			SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+				("MC address %d on Port %u: %02x %02x %02x %02x %02x %02x --  %02x %02x %02x %02x %02x %02x.\n",
+					k, pAC->Rlmt.Net[Para.Para32[0]].Port[j]->PortNumber,
+					InAddr8[0], InAddr8[1], InAddr8[2],
+					InAddr8[3], InAddr8[4], InAddr8[5],
+					pAPort->Exact[k].a[0], pAPort->Exact[k].a[1],
+					pAPort->Exact[k].a[2], pAPort->Exact[k].a[3],
+					pAPort->Exact[k].a[4], pAPort->Exact[k].a[5]))
+		}
+	}
+#endif	/* xDEBUG */
+				
+	SkRlmtCheckSeg(pAC, IoC, Para.Para32[0]);
+
+	SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+			("SK_RLMT_SEG_TIM Event END.\n"))
+}	/* SkRlmtEvtSegTim */
+
+
+/******************************************************************************
+ *
+ *	SkRlmtEvtPacketRx - PACKET_RECEIVED
+ *
+ * Description:
+ *	This routine handles PACKET_RECEIVED events.
+ *
+ * Context:
+ *	runtime, pageable?
+ *	may be called after SK_INIT_IO
+ *
+ * Returns:
+ *	Nothing
+ */
+RLMT_STATIC void	SkRlmtEvtPacketRx(
+SK_AC		*pAC,	/* Adapter Context */
+SK_IOC		IoC,	/* I/O Context */
+SK_EVPARA	Para)	/* SK_MBUF *pMb */
+{
+	SK_MBUF	*pMb;
+	SK_MBUF	*pNextMb;
+	SK_U32	NetNumber;
+
+	
+	SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+		("SK_RLMT_PACKET_RECEIVED Event BEGIN.\n"))
+
+	/* Should we ignore frames during port switching? */
+
+#ifdef DEBUG
+	pMb = Para.pParaPtr;
+	if (pMb == NULL) {
+		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, ("No mbuf.\n"))
+	}
+	else if (pMb->pNext != NULL) {
+		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+			("More than one mbuf or pMb->pNext not set.\n"))
+	}
+#endif	/* DEBUG */
+
+	for (pMb = Para.pParaPtr; pMb != NULL; pMb = pNextMb) {
+		pNextMb = pMb->pNext;
+		pMb->pNext = NULL;
+
+		NetNumber = pAC->Rlmt.Port[pMb->PortIdx].Net->NetNumber;
+		if (pAC->Rlmt.Net[NetNumber].RlmtState == SK_RLMT_RS_INIT) {
+			SkDrvFreeRlmtMbuf(pAC, IoC, pMb);
+		}
+		else {
+			SkRlmtPacketReceive(pAC, IoC, pMb);
+		}
+	}
+
+	SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+		("SK_RLMT_PACKET_RECEIVED Event END.\n"))
+}	/* SkRlmtEvtPacketRx */
+
+
+/******************************************************************************
+ *
+ *	SkRlmtEvtStatsClear - STATS_CLEAR
+ *
+ * Description:
+ *	This routine handles STATS_CLEAR events.
+ *
+ * Context:
+ *	runtime, pageable?
+ *	may be called after SK_INIT_IO
+ *
+ * Returns:
+ *	Nothing
+ */
+RLMT_STATIC void	SkRlmtEvtStatsClear(
+SK_AC		*pAC,	/* Adapter Context */
+SK_IOC		IoC,	/* I/O Context */
+SK_EVPARA	Para)	/* SK_U32 NetNumber; SK_U32 -1 */
+{
+	SK_U32			i;
+	SK_RLMT_PORT	*pRPort;
+
+	SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+		("SK_RLMT_STATS_CLEAR Event BEGIN.\n"))
+
+	if (Para.Para32[1] != (SK_U32)-1) {
+		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+			("Bad Parameter.\n"))
+		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+			("SK_RLMT_STATS_CLEAR Event EMPTY.\n"))
+		return;
+	}
+
+	if (Para.Para32[0] >= pAC->Rlmt.NumNets) {
+		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+			("Bad NetNumber %d.\n", Para.Para32[0]))
+		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+			("SK_RLMT_STATS_CLEAR Event EMPTY.\n"))
+		return;
+	}
+
+	/* Clear statistics for logical and physical ports. */
+	for (i = 0; i < pAC->Rlmt.Net[Para.Para32[0]].NumPorts; i++) {
+		pRPort =
+			&pAC->Rlmt.Port[pAC->Rlmt.Net[Para.Para32[0]].Port[i]->PortNumber];
+		pRPort->TxHelloCts = 0;
+		pRPort->RxHelloCts = 0;
+		pRPort->TxSpHelloReqCts = 0;
+		pRPort->RxSpHelloCts = 0;
+	}
+
+	SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+		("SK_RLMT_STATS_CLEAR Event END.\n"))
+}	/* SkRlmtEvtStatsClear */
+
+
+/******************************************************************************
+ *
+ *	SkRlmtEvtStatsUpdate - STATS_UPDATE
+ *
+ * Description:
+ *	This routine handles STATS_UPDATE events.
+ *
+ * Context:
+ *	runtime, pageable?
+ *	may be called after SK_INIT_IO
+ *
+ * Returns:
+ *	Nothing
+ */
+RLMT_STATIC void	SkRlmtEvtStatsUpdate(
+SK_AC		*pAC,	/* Adapter Context */
+SK_IOC		IoC,	/* I/O Context */
+SK_EVPARA	Para)	/* SK_U32 NetNumber; SK_U32 -1 */
+{
+	SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+		("SK_RLMT_STATS_UPDATE Event BEGIN.\n"))
+
+	if (Para.Para32[1] != (SK_U32)-1) {
+		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+			("Bad Parameter.\n"))
+		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+			("SK_RLMT_STATS_UPDATE Event EMPTY.\n"))
+		return;
+	}
+
+	if (Para.Para32[0] >= pAC->Rlmt.NumNets) {
+		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+			("Bad NetNumber %d.\n", Para.Para32[0]))
+		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+			("SK_RLMT_STATS_UPDATE Event EMPTY.\n"))
+		return;
+	}
+
+	/* Update statistics - currently always up-to-date. */
+
+	SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+		("SK_RLMT_STATS_UPDATE Event END.\n"))
+}	/* SkRlmtEvtStatsUpdate */
+
+
+/******************************************************************************
+ *
+ *	SkRlmtEvtPrefportChange - PREFPORT_CHANGE
+ *
+ * Description:
+ *	This routine handles PREFPORT_CHANGE events.
+ *
+ * Context:
+ *	runtime, pageable?
+ *	may be called after SK_INIT_IO
+ *
+ * Returns:
+ *	Nothing
+ */
+RLMT_STATIC void	SkRlmtEvtPrefportChange(
+SK_AC		*pAC,	/* Adapter Context */
+SK_IOC		IoC,	/* I/O Context */
+SK_EVPARA	Para)	/* SK_U32 PortIndex; SK_U32 NetNumber */
+{
+	SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+		("SK_RLMT_PREFPORT_CHANGE to Port %d Event BEGIN.\n", Para.Para32[0]))
+
+	if (Para.Para32[1] >= pAC->Rlmt.NumNets) {
+		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+			("Bad NetNumber %d.\n", Para.Para32[1]))
+		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+			("SK_RLMT_PREFPORT_CHANGE Event EMPTY.\n"))
+		return;
+	}
+
+	/* 0xFFFFFFFF == auto-mode. */
+	if (Para.Para32[0] == 0xFFFFFFFF) {
+		pAC->Rlmt.Net[Para.Para32[1]].PrefPort = SK_RLMT_DEF_PREF_PORT;
+	}
+	else {
+		if (Para.Para32[0] >= pAC->Rlmt.Net[Para.Para32[1]].NumPorts) {
+			SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_RLMT_E010, SKERR_RLMT_E010_MSG);
+
+			SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+				("SK_RLMT_PREFPORT_CHANGE Event EMPTY.\n"))
+			return;
+		}
+
+		pAC->Rlmt.Net[Para.Para32[1]].PrefPort = Para.Para32[0];
+	}
+
+	pAC->Rlmt.Net[Para.Para32[1]].Preference = Para.Para32[0];
+
+	if (pAC->Rlmt.Net[Para.Para32[1]].RlmtState != SK_RLMT_RS_INIT) {
+		SkRlmtCheckSwitch(pAC, IoC, Para.Para32[1]);
+	}
+
+	SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+		("SK_RLMT_PREFPORT_CHANGE Event END.\n"))
+}	/* SkRlmtEvtPrefportChange */
+
+
+/******************************************************************************
+ *
+ *	SkRlmtEvtSetNets - SET_NETS
+ *
+ * Description:
+ *	This routine handles SET_NETS events.
+ *
+ * Context:
+ *	runtime, pageable?
+ *	may be called after SK_INIT_IO
+ *
+ * Returns:
+ *	Nothing
+ */
+RLMT_STATIC void	SkRlmtEvtSetNets(
+SK_AC		*pAC,	/* Adapter Context */
+SK_IOC		IoC,	/* I/O Context */
+SK_EVPARA	Para)	/* SK_U32 NumNets; SK_U32 -1 */
+{
+	int i;
+
+	SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+		("SK_RLMT_SET_NETS Event BEGIN.\n"))
+
+	if (Para.Para32[1] != (SK_U32)-1) {
+		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+			("Bad Parameter.\n"))
+		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+			("SK_RLMT_SET_NETS Event EMPTY.\n"))
+		return;
+	}
+
+	if (Para.Para32[0] == 0 || Para.Para32[0] > SK_MAX_NETS ||
+		Para.Para32[0] > (SK_U32)pAC->GIni.GIMacsFound) {
+		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+			("Bad number of nets: %d.\n", Para.Para32[0]))
+		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+			("SK_RLMT_SET_NETS Event EMPTY.\n"))
+		return;
+	}
+
+	if (Para.Para32[0] == pAC->Rlmt.NumNets) {	/* No change. */
+		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+			("SK_RLMT_SET_NETS Event EMPTY.\n"))
+		return;
+	}
+
+	/* Entering and leaving dual mode only allowed while nets are stopped. */
+	if (pAC->Rlmt.NetsStarted > 0) {
+		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+			("Changing dual mode only allowed while all nets are stopped.\n"))
+		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+			("SK_RLMT_SET_NETS Event EMPTY.\n"))
+		return;
+	}
+
+	if (Para.Para32[0] == 1) {
+		if (pAC->Rlmt.NumNets > 1) {
+			/* Clear logical MAC addr from second net's active port. */
+			(void)SkAddrOverride(pAC, IoC, pAC->Rlmt.Net[1].Port[pAC->Addr.
+				Net[1].ActivePort]->PortNumber, NULL, SK_ADDR_CLEAR_LOGICAL);
+			pAC->Rlmt.Net[1].NumPorts = 0;
+		}
+
+		pAC->Rlmt.NumNets = Para.Para32[0];
+		for (i = 0; (SK_U32)i < pAC->Rlmt.NumNets; i++) {
+			pAC->Rlmt.Net[i].RlmtState = SK_RLMT_RS_INIT;
+			pAC->Rlmt.Net[i].RootIdSet = SK_FALSE;
+			pAC->Rlmt.Net[i].Preference = 0xFFFFFFFF;	  /* "Automatic" */
+			pAC->Rlmt.Net[i].PrefPort = SK_RLMT_DEF_PREF_PORT;
+			/* Just assuming. */
+			pAC->Rlmt.Net[i].ActivePort = pAC->Rlmt.Net[i].PrefPort;
+			pAC->Rlmt.Net[i].RlmtMode = SK_RLMT_DEF_MODE;
+			pAC->Rlmt.Net[i].TimeoutValue = SK_RLMT_DEF_TO_VAL;
+			pAC->Rlmt.Net[i].NetNumber = i;
+		}
+
+		pAC->Rlmt.Port[1].Net= &pAC->Rlmt.Net[0];
+		pAC->Rlmt.Net[0].NumPorts = pAC->GIni.GIMacsFound;
+
+		SkEventQueue(pAC, SKGE_PNMI, SK_PNMI_EVT_RLMT_SET_NETS, Para);
+
+		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+			("RLMT: Changed to one net with two ports.\n"))
+	}
+	else if (Para.Para32[0] == 2) {
+		pAC->Rlmt.Port[1].Net= &pAC->Rlmt.Net[1];
+		pAC->Rlmt.Net[1].NumPorts = pAC->GIni.GIMacsFound - 1;
+		pAC->Rlmt.Net[0].NumPorts =
+			pAC->GIni.GIMacsFound - pAC->Rlmt.Net[1].NumPorts;
+		
+		pAC->Rlmt.NumNets = Para.Para32[0];
+		for (i = 0; (SK_U32)i < pAC->Rlmt.NumNets; i++) {
+			pAC->Rlmt.Net[i].RlmtState = SK_RLMT_RS_INIT;
+			pAC->Rlmt.Net[i].RootIdSet = SK_FALSE;
+			pAC->Rlmt.Net[i].Preference = 0xFFFFFFFF;	  /* "Automatic" */
+			pAC->Rlmt.Net[i].PrefPort = SK_RLMT_DEF_PREF_PORT;
+			/* Just assuming. */
+			pAC->Rlmt.Net[i].ActivePort = pAC->Rlmt.Net[i].PrefPort;
+			pAC->Rlmt.Net[i].RlmtMode = SK_RLMT_DEF_MODE;
+			pAC->Rlmt.Net[i].TimeoutValue = SK_RLMT_DEF_TO_VAL;
+
+			pAC->Rlmt.Net[i].NetNumber = i;
+		}
+
+		/* Set logical MAC addr on second net's active port. */
+		(void)SkAddrOverride(pAC, IoC, pAC->Rlmt.Net[1].Port[pAC->Addr.
+			Net[1].ActivePort]->PortNumber, NULL, SK_ADDR_SET_LOGICAL);
+
+		SkEventQueue(pAC, SKGE_PNMI, SK_PNMI_EVT_RLMT_SET_NETS, Para);
+
+		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+			("RLMT: Changed to two nets with one port each.\n"))
+	}
+	else {
+		/* Not implemented for more than two nets. */
+		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+			("SetNets not implemented for more than two nets.\n"))
+		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+			("SK_RLMT_SET_NETS Event EMPTY.\n"))
+		return;
+	}
+
+	SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+		("SK_RLMT_SET_NETS Event END.\n"))
+}	/* SkRlmtSetNets */
+
+
+/******************************************************************************
+ *
+ *	SkRlmtEvtModeChange - MODE_CHANGE
+ *
+ * Description:
+ *	This routine handles MODE_CHANGE events.
+ *
+ * Context:
+ *	runtime, pageable?
+ *	may be called after SK_INIT_IO
+ *
+ * Returns:
+ *	Nothing
+ */
+RLMT_STATIC void	SkRlmtEvtModeChange(
+SK_AC		*pAC,	/* Adapter Context */
+SK_IOC		IoC,	/* I/O Context */
+SK_EVPARA	Para)	/* SK_U32 NewMode; SK_U32 NetNumber */
+{
+	SK_EVPARA	Para2;
+	SK_U32		i;
+	SK_U32		PrevRlmtMode;
+
+	SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+		("SK_RLMT_MODE_CHANGE Event BEGIN.\n"))
+
+	if (Para.Para32[1] >= pAC->Rlmt.NumNets) {
+		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+			("Bad NetNumber %d.\n", Para.Para32[1]))
+		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+			("SK_RLMT_MODE_CHANGE Event EMPTY.\n"))
+		return;
+	}
+
+	Para.Para32[0] |= SK_RLMT_CHECK_LINK;
+
+	if ((pAC->Rlmt.Net[Para.Para32[1]].NumPorts == 1) &&
+		Para.Para32[0] != SK_RLMT_MODE_CLS) {
+		pAC->Rlmt.Net[Para.Para32[1]].RlmtMode = SK_RLMT_MODE_CLS;
+		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+			("Forced RLMT mode to CLS on single port net.\n"))
+		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+			("SK_RLMT_MODE_CHANGE Event EMPTY.\n"))
+		return;
+	}
+
+	/* Update RLMT mode. */
+	PrevRlmtMode = pAC->Rlmt.Net[Para.Para32[1]].RlmtMode;
+	pAC->Rlmt.Net[Para.Para32[1]].RlmtMode = Para.Para32[0];
+
+	if ((PrevRlmtMode & SK_RLMT_CHECK_LOC_LINK) !=
+		(pAC->Rlmt.Net[Para.Para32[1]].RlmtMode & SK_RLMT_CHECK_LOC_LINK)) {
+		/* SK_RLMT_CHECK_LOC_LINK bit changed. */
+		if ((PrevRlmtMode & SK_RLMT_CHECK_OTHERS) == 0 &&
+			pAC->Rlmt.Net[Para.Para32[1]].NumPorts > 1 &&
+			pAC->Rlmt.Net[Para.Para32[1]].PortsUp >= 1) {
+			/* 20001207 RA: Was "PortsUp == 1". */
+			Para2.Para32[0] = Para.Para32[1];
+			Para2.Para32[1] = (SK_U32)-1;
+			SkTimerStart(pAC, IoC, &pAC->Rlmt.Net[Para.Para32[1]].LocTimer,
+				pAC->Rlmt.Net[Para.Para32[1]].TimeoutValue,
+				SKGE_RLMT, SK_RLMT_TIM, Para2);
+		}
+	}
+
+	if ((PrevRlmtMode & SK_RLMT_CHECK_SEG) !=
+		(pAC->Rlmt.Net[Para.Para32[1]].RlmtMode & SK_RLMT_CHECK_SEG)) {
+		/* SK_RLMT_CHECK_SEG bit changed. */
+		for (i = 0; i < pAC->Rlmt.Net[Para.Para32[1]].NumPorts; i++) {
+			(void)SkAddrMcClear(pAC, IoC,
+				pAC->Rlmt.Net[Para.Para32[1]].Port[i]->PortNumber,
+				SK_ADDR_PERMANENT | SK_MC_SW_ONLY);
+
+			/* Add RLMT MC address. */
+			(void)SkAddrMcAdd(pAC, IoC,
+				pAC->Rlmt.Net[Para.Para32[1]].Port[i]->PortNumber,
+				&SkRlmtMcAddr, SK_ADDR_PERMANENT);
+
+			if ((pAC->Rlmt.Net[Para.Para32[1]].RlmtMode &
+				SK_RLMT_CHECK_SEG) != 0) {
+				/* Add BPDU MC address. */
+				(void)SkAddrMcAdd(pAC, IoC,
+					pAC->Rlmt.Net[Para.Para32[1]].Port[i]->PortNumber,
+					&BridgeMcAddr, SK_ADDR_PERMANENT);
+
+				if (pAC->Rlmt.Net[Para.Para32[1]].RlmtState != SK_RLMT_RS_INIT) {
+					if (!pAC->Rlmt.Net[Para.Para32[1]].Port[i]->LinkDown &&
+						(Para2.pParaPtr = SkRlmtBuildSpanningTreePacket(
+						pAC, IoC, i)) != NULL) {
+						pAC->Rlmt.Net[Para.Para32[1]].Port[i]->RootIdSet =
+							SK_FALSE;
+						SkEventQueue(pAC, SKGE_DRV, SK_DRV_RLMT_SEND, Para2);
+					}
+				}
+			}
+			(void)SkAddrMcUpdate(pAC, IoC,
+				pAC->Rlmt.Net[Para.Para32[1]].Port[i]->PortNumber);
+		}	/* for ... */
+
+		if ((pAC->Rlmt.Net[Para.Para32[1]].RlmtMode & SK_RLMT_CHECK_SEG) != 0) {
+			Para2.Para32[0] = Para.Para32[1];
+			Para2.Para32[1] = (SK_U32)-1;
+			SkTimerStart(pAC, IoC, &pAC->Rlmt.Net[Para.Para32[1]].SegTimer,
+				SK_RLMT_SEG_TO_VAL, SKGE_RLMT, SK_RLMT_SEG_TIM, Para2);
+		}
+	}	/* SK_RLMT_CHECK_SEG bit changed. */
+
+	SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+			("SK_RLMT_MODE_CHANGE Event END.\n"))
+}	/* SkRlmtEvtModeChange */
+
+
+/******************************************************************************
+ *
+ *	SkRlmtEvent - a PORT- or an RLMT-specific event happened
+ *
+ * Description:
+ *	This routine calls subroutines to handle PORT- and RLMT-specific events.
+ *
+ * Context:
+ *	runtime, pageable?
+ *	may be called after SK_INIT_IO
+ *
+ * Returns:
+ *	0
+ */
+int	SkRlmtEvent(
+SK_AC		*pAC,	/* Adapter Context */
+SK_IOC		IoC,	/* I/O Context */
+SK_U32		Event,	/* Event code */
+SK_EVPARA	Para)	/* Event-specific parameter */
+{
+	switch (Event) {
+	
+	/* ----- PORT events ----- */
+
+	case SK_RLMT_PORTSTART_TIM:	/* From RLMT via TIME. */
+		SkRlmtEvtPortStartTim(pAC, IoC, Para);
+		break;
+	case SK_RLMT_LINK_UP:		/* From SIRQ. */
+		SkRlmtEvtLinkUp(pAC, IoC, Para);
+		break;
+	case SK_RLMT_PORTUP_TIM:	/* From RLMT via TIME. */
+		SkRlmtEvtPortUpTim(pAC, IoC, Para);
+		break;
+	case SK_RLMT_PORTDOWN:			/* From RLMT. */
+	case SK_RLMT_PORTDOWN_RX_TIM:	/* From RLMT via TIME. */
+	case SK_RLMT_PORTDOWN_TX_TIM:	/* From RLMT via TIME. */
+		SkRlmtEvtPortDownX(pAC, IoC, Event, Para);
+		break;
+	case SK_RLMT_LINK_DOWN:		/* From SIRQ. */
+		SkRlmtEvtLinkDown(pAC, IoC, Para);
+		break;
+	case SK_RLMT_PORT_ADDR:		/* From ADDR. */
+		SkRlmtEvtPortAddr(pAC, IoC, Para);
+		break;
+
+	/* ----- RLMT events ----- */
+
+	case SK_RLMT_START:		/* From DRV. */
+		SkRlmtEvtStart(pAC, IoC, Para);
+		break;
+	case SK_RLMT_STOP:		/* From DRV. */
+		SkRlmtEvtStop(pAC, IoC, Para);
+		break;
+	case SK_RLMT_TIM:		/* From RLMT via TIME. */
+		SkRlmtEvtTim(pAC, IoC, Para);
+		break;
+	case SK_RLMT_SEG_TIM:
+		SkRlmtEvtSegTim(pAC, IoC, Para);
+		break;
+	case SK_RLMT_PACKET_RECEIVED:	/* From DRV. */
+		SkRlmtEvtPacketRx(pAC, IoC, Para);
+		break;
+	case SK_RLMT_STATS_CLEAR:	/* From PNMI. */
+		SkRlmtEvtStatsClear(pAC, IoC, Para);
+		break;
+	case SK_RLMT_STATS_UPDATE:	/* From PNMI. */
+		SkRlmtEvtStatsUpdate(pAC, IoC, Para);
+		break;
+	case SK_RLMT_PREFPORT_CHANGE:	/* From PNMI. */
+		SkRlmtEvtPrefportChange(pAC, IoC, Para);
+		break;
+	case SK_RLMT_MODE_CHANGE:	/* From PNMI. */
+		SkRlmtEvtModeChange(pAC, IoC, Para);
+		break;
+	case SK_RLMT_SET_NETS:	/* From DRV. */
+		SkRlmtEvtSetNets(pAC, IoC, Para);
+		break;
+
+	/* ----- Unknown events ----- */
+
+	default:	/* Create error log entry. */
+		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
+			("Unknown RLMT Event %d.\n", Event))
+		SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_RLMT_E003, SKERR_RLMT_E003_MSG);
+		break;
+	}	/* switch() */
+
+	return (0);
+}	/* SkRlmtEvent */
+
+#ifdef __cplusplus
+}
+#endif	/* __cplusplus */
diff --git a/drivers/net/sk98lin/sktimer.c b/drivers/net/sk98lin/sktimer.c
new file mode 100644
index 0000000..4e46295
--- /dev/null
+++ b/drivers/net/sk98lin/sktimer.c
@@ -0,0 +1,250 @@
+/******************************************************************************
+ *
+ * Name:	sktimer.c
+ * Project:	Gigabit Ethernet Adapters, Event Scheduler Module
+ * Version:	$Revision: 1.14 $
+ * Date:	$Date: 2003/09/16 13:46:51 $
+ * Purpose:	High level timer functions.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *	(C)Copyright 1998-2002 SysKonnect GmbH.
+ *	(C)Copyright 2002-2003 Marvell.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+
+/*
+ *	Event queue and dispatcher
+ */
+#if (defined(DEBUG) || ((!defined(LINT)) && (!defined(SK_SLIM))))
+static const char SysKonnectFileId[] =
+	"@(#) $Id: sktimer.c,v 1.14 2003/09/16 13:46:51 rschmidt Exp $ (C) Marvell.";
+#endif
+
+#include "h/skdrv1st.h"		/* Driver Specific Definitions */
+#include "h/skdrv2nd.h"		/* Adapter Control- and Driver specific Def. */
+
+#ifdef __C2MAN__
+/*
+	Event queue management.
+
+	General Description:
+
+ */
+intro()
+{}
+#endif
+
+
+/* Forward declaration */
+static void timer_done(SK_AC *pAC,SK_IOC Ioc,int Restart);
+
+
+/*
+ * Inits the software timer
+ *
+ * needs to be called during Init level 1.
+ */
+void	SkTimerInit(
+SK_AC	*pAC,		/* Adapters context */
+SK_IOC	Ioc,		/* IoContext */
+int		Level)		/* Init Level */
+{
+	switch (Level) {
+	case SK_INIT_DATA:
+		pAC->Tim.StQueue = NULL;
+		break;
+	case SK_INIT_IO:
+		SkHwtInit(pAC, Ioc);
+		SkTimerDone(pAC, Ioc);
+		break;
+	default:
+		break;
+	}
+}
+
+/*
+ * Stops a high level timer
+ * - If a timer is not in the queue the function returns normally, too.
+ */
+void	SkTimerStop(
+SK_AC		*pAC,		/* Adapters context */
+SK_IOC		Ioc,		/* IoContext */
+SK_TIMER	*pTimer)	/* Timer Pointer to be started */
+{
+	SK_TIMER	**ppTimPrev;
+	SK_TIMER	*pTm;
+
+	/*
+	 * remove timer from queue
+	 */
+	pTimer->TmActive = SK_FALSE;
+	
+	if (pAC->Tim.StQueue == pTimer && !pTimer->TmNext) {
+		SkHwtStop(pAC, Ioc);
+	}
+	
+	for (ppTimPrev = &pAC->Tim.StQueue; (pTm = *ppTimPrev);
+		ppTimPrev = &pTm->TmNext ) {
+		
+		if (pTm == pTimer) {
+			/*
+			 * Timer found in queue
+			 * - dequeue it and
+			 * - correct delta of the next timer
+			 */
+			*ppTimPrev = pTm->TmNext;
+
+			if (pTm->TmNext) {
+				/* correct delta of next timer in queue */
+				pTm->TmNext->TmDelta += pTm->TmDelta;
+			}
+			return;
+		}
+	}
+}
+
+/*
+ * Start a high level software timer
+ */
+void	SkTimerStart(
+SK_AC		*pAC,		/* Adapters context */
+SK_IOC		Ioc,		/* IoContext */
+SK_TIMER	*pTimer,	/* Timer Pointer to be started */
+SK_U32		Time,		/* Time value */
+SK_U32		Class,		/* Event Class for this timer */
+SK_U32		Event,		/* Event Value for this timer */
+SK_EVPARA	Para)		/* Event Parameter for this timer */
+{
+	SK_TIMER	**ppTimPrev;
+	SK_TIMER	*pTm;
+	SK_U32		Delta;
+
+	Time /= 16;		/* input is uS, clock ticks are 16uS */
+	
+	if (!Time)
+		Time = 1;
+
+	SkTimerStop(pAC, Ioc, pTimer);
+
+	pTimer->TmClass = Class;
+	pTimer->TmEvent = Event;
+	pTimer->TmPara = Para;
+	pTimer->TmActive = SK_TRUE;
+
+	if (!pAC->Tim.StQueue) {
+		/* First Timer to be started */
+		pAC->Tim.StQueue = pTimer;
+		pTimer->TmNext = NULL;
+		pTimer->TmDelta = Time;
+		
+		SkHwtStart(pAC, Ioc, Time);
+		
+		return;
+	}
+
+	/*
+	 * timer correction
+	 */
+	timer_done(pAC, Ioc, 0);
+
+	/*
+	 * find position in queue
+	 */
+	Delta = 0;
+	for (ppTimPrev = &pAC->Tim.StQueue; (pTm = *ppTimPrev);
+		ppTimPrev = &pTm->TmNext ) {
+		
+		if (Delta + pTm->TmDelta > Time) {
+			/* Position found */
+			/* Here the timer needs to be inserted. */
+			break;
+		}
+		Delta += pTm->TmDelta;
+	}
+
+	/* insert in queue */
+	*ppTimPrev = pTimer;
+	pTimer->TmNext = pTm;
+	pTimer->TmDelta = Time - Delta;
+
+	if (pTm) {
+		/* There is a next timer
+		 * -> correct its Delta value.
+		 */
+		pTm->TmDelta -= pTimer->TmDelta;
+	}
+
+	/* restart with first */
+	SkHwtStart(pAC, Ioc, pAC->Tim.StQueue->TmDelta);
+}
+
+
+void	SkTimerDone(
+SK_AC	*pAC,		/* Adapters context */
+SK_IOC	Ioc)		/* IoContext */
+{
+	timer_done(pAC, Ioc, 1);
+}
+
+
+static void	timer_done(
+SK_AC	*pAC,		/* Adapters context */
+SK_IOC	Ioc,		/* IoContext */
+int		Restart)	/* Do we need to restart the Hardware timer ? */
+{
+	SK_U32		Delta;
+	SK_TIMER	*pTm;
+	SK_TIMER	*pTComp;	/* Timer completed now now */
+	SK_TIMER	**ppLast;	/* Next field of Last timer to be deq */
+	int		Done = 0;
+
+	Delta = SkHwtRead(pAC, Ioc);
+	
+	ppLast = &pAC->Tim.StQueue;
+	pTm = pAC->Tim.StQueue;
+	while (pTm && !Done) {
+		if (Delta >= pTm->TmDelta) {
+			/* Timer ran out */
+			pTm->TmActive = SK_FALSE;
+			Delta -= pTm->TmDelta;
+			ppLast = &pTm->TmNext;
+			pTm = pTm->TmNext;
+		}
+		else {
+			/* We found the first timer that did not run out */
+			pTm->TmDelta -= Delta;
+			Delta = 0;
+			Done = 1;
+		}
+	}
+	*ppLast = NULL;
+	/*
+	 * pTm points to the first Timer that did not run out.
+	 * StQueue points to the first Timer that run out.
+	 */
+
+	for ( pTComp = pAC->Tim.StQueue; pTComp; pTComp = pTComp->TmNext) {
+		SkEventQueue(pAC,pTComp->TmClass, pTComp->TmEvent, pTComp->TmPara);
+	}
+
+	/* Set head of timer queue to the first timer that did not run out */
+	pAC->Tim.StQueue = pTm;
+
+	if (Restart && pAC->Tim.StQueue) {
+		/* Restart HW timer */
+		SkHwtStart(pAC, Ioc, pAC->Tim.StQueue->TmDelta);
+	}
+}
+
+/* End of file */
diff --git a/drivers/net/sk98lin/skvpd.c b/drivers/net/sk98lin/skvpd.c
new file mode 100644
index 0000000..1e662aa
--- /dev/null
+++ b/drivers/net/sk98lin/skvpd.c
@@ -0,0 +1,1091 @@
+/******************************************************************************
+ *
+ * Name:	skvpd.c
+ * Project:	GEnesis, PCI Gigabit Ethernet Adapter
+ * Version:	$Revision: 1.37 $
+ * Date:	$Date: 2003/01/13 10:42:45 $
+ * Purpose:	Shared software to read and write VPD data
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *	(C)Copyright 1998-2003 SysKonnect GmbH.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/*
+	Please refer skvpd.txt for information how to include this module
+ */
+static const char SysKonnectFileId[] =
+	"@(#)$Id: skvpd.c,v 1.37 2003/01/13 10:42:45 rschmidt Exp $ (C) SK";
+
+#include "h/skdrv1st.h"
+#include "h/sktypes.h"
+#include "h/skdebug.h"
+#include "h/skdrv2nd.h"
+
+/*
+ * Static functions
+ */
+#ifndef SK_KR_PROTO
+static SK_VPD_PARA	*vpd_find_para(
+	SK_AC	*pAC,
+	const char	*key,
+	SK_VPD_PARA *p);
+#else	/* SK_KR_PROTO */
+static SK_VPD_PARA	*vpd_find_para();
+#endif	/* SK_KR_PROTO */
+
+/*
+ * waits for a completion of a VPD transfer
+ * The VPD transfer must complete within SK_TICKS_PER_SEC/16
+ *
+ * returns	0:	success, transfer completes
+ *		error	exit(9) with a error message
+ */
+static int VpdWait(
+SK_AC	*pAC,	/* Adapters context */
+SK_IOC	IoC,	/* IO Context */
+int		event)	/* event to wait for (VPD_READ / VPD_write) completion*/
+{
+	SK_U64	start_time;
+	SK_U16	state;
+
+	SK_DBG_MSG(pAC,SK_DBGMOD_VPD, SK_DBGCAT_CTRL,
+		("VPD wait for %s\n", event?"Write":"Read"));
+	start_time = SkOsGetTime(pAC);
+	do {
+		if (SkOsGetTime(pAC) - start_time > SK_TICKS_PER_SEC) {
+
+			/* Bug fix AF: Thu Mar 28 2002
+			 * Do not call: VPD_STOP(pAC, IoC);
+			 * A pending VPD read cycle can not be aborted by writing
+			 * VPD_WRITE to the PCI_VPD_ADR_REG (VPD address register).
+			 * Although the write threshold in the OUR-register protects
+			 * VPD read only space from being overwritten this does not
+			 * protect a VPD read from being `converted` into a VPD write
+			 * operation (on the fly). As a consequence the VPD_STOP would
+			 * delete VPD read only data. In case of any problems with the
+			 * I2C bus we exit the loop here. The I2C read operation can
+			 * not be aborted except by a reset (->LR).
+			 */
+			SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_FATAL | SK_DBGCAT_ERR,
+				("ERROR:VPD wait timeout\n"));
+			return(1);
+		}
+		
+		VPD_IN16(pAC, IoC, PCI_VPD_ADR_REG, &state);
+		
+		SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_CTRL,
+			("state = %x, event %x\n",state,event));
+	} while((int)(state & PCI_VPD_FLAG) == event);
+
+	return(0);
+}
+
+#ifdef SKDIAG
+
+/*
+ * Read the dword at address 'addr' from the VPD EEPROM.
+ *
+ * Needed Time:	MIN 1,3 ms	MAX 2,6 ms
+ *
+ * Note: The DWord is returned in the endianess of the machine the routine
+ *       is running on.
+ *
+ * Returns the data read.
+ */
+SK_U32 VpdReadDWord(
+SK_AC	*pAC,	/* Adapters context */
+SK_IOC	IoC,	/* IO Context */
+int		addr)	/* VPD address */
+{
+	SK_U32	Rtv;
+
+	/* start VPD read */
+	SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_CTRL,
+		("VPD read dword at 0x%x\n",addr));
+	addr &= ~VPD_WRITE;		/* ensure the R/W bit is set to read */
+
+	VPD_OUT16(pAC, IoC, PCI_VPD_ADR_REG, (SK_U16)addr);
+
+	/* ignore return code here */
+	(void)VpdWait(pAC, IoC, VPD_READ);
+
+	/* Don't swap here, it's a data stream of bytes */
+	Rtv = 0;
+
+	VPD_IN32(pAC, IoC, PCI_VPD_DAT_REG, &Rtv);
+	
+	SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_CTRL,
+		("VPD read dword data = 0x%x\n",Rtv));
+	return(Rtv);
+}
+
+#endif	/* SKDIAG */
+
+/*
+ *	Read one Stream of 'len' bytes of VPD data, starting at 'addr' from
+ *	or to the I2C EEPROM.
+ *
+ * Returns number of bytes read / written.
+ */
+static int VpdWriteStream(
+SK_AC	*pAC,	/* Adapters context */
+SK_IOC	IoC,	/* IO Context */
+char	*buf,	/* data buffer */
+int		Addr,	/* VPD start address */
+int		Len)	/* number of bytes to read / to write */
+{
+	int		i;
+	int		j;
+	SK_U16	AdrReg;
+	int		Rtv;
+	SK_U8	* pComp;	/* Compare pointer */
+	SK_U8	Data;		/* Input Data for Compare */
+
+	/* Init Compare Pointer */
+	pComp = (SK_U8 *) buf;
+
+	for (i = 0; i < Len; i++, buf++) {
+		if ((i%sizeof(SK_U32)) == 0) {
+			/*
+			 * At the begin of each cycle read the Data Reg
+			 * So it is initialized even if only a few bytes
+			 * are written.
+			 */
+			AdrReg = (SK_U16) Addr;
+			AdrReg &= ~VPD_WRITE;	/* READ operation */
+
+			VPD_OUT16(pAC, IoC, PCI_VPD_ADR_REG, AdrReg);
+
+			/* Wait for termination */
+			Rtv = VpdWait(pAC, IoC, VPD_READ);
+			if (Rtv != 0) {
+				return(i);
+			}
+		}
+
+		/* Write current Byte */
+		VPD_OUT8(pAC, IoC, PCI_VPD_DAT_REG + (i%sizeof(SK_U32)),
+				*(SK_U8*)buf);
+
+		if (((i%sizeof(SK_U32)) == 3) || (i == (Len - 1))) {
+			/* New Address needs to be written to VPD_ADDR reg */
+			AdrReg = (SK_U16) Addr;
+			Addr += sizeof(SK_U32);
+			AdrReg |= VPD_WRITE;	/* WRITE operation */
+
+			VPD_OUT16(pAC, IoC, PCI_VPD_ADR_REG, AdrReg);
+
+			/* Wait for termination */
+			Rtv = VpdWait(pAC, IoC, VPD_WRITE);
+			if (Rtv != 0) {
+				SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR,
+					("Write Timed Out\n"));
+				return(i - (i%sizeof(SK_U32)));
+			}
+
+			/*
+			 * Now re-read to verify
+			 */
+			AdrReg &= ~VPD_WRITE;	/* READ operation */
+
+			VPD_OUT16(pAC, IoC, PCI_VPD_ADR_REG, AdrReg);
+
+			/* Wait for termination */
+			Rtv = VpdWait(pAC, IoC, VPD_READ);
+			if (Rtv != 0) {
+				SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR,
+					("Verify Timed Out\n"));
+				return(i - (i%sizeof(SK_U32)));
+			}
+
+			for (j = 0; j <= (int)(i%sizeof(SK_U32)); j++, pComp++) {
+				
+				VPD_IN8(pAC, IoC, PCI_VPD_DAT_REG + j, &Data);
+				
+				if (Data != *pComp) {
+					/* Verify Error */
+					SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR,
+						("WriteStream Verify Error\n"));
+					return(i - (i%sizeof(SK_U32)) + j);
+				}
+			}
+		}
+	}
+
+	return(Len);
+}
+	
+
+/*
+ *	Read one Stream of 'len' bytes of VPD data, starting at 'addr' from
+ *	or to the I2C EEPROM.
+ *
+ * Returns number of bytes read / written.
+ */
+static int VpdReadStream(
+SK_AC	*pAC,	/* Adapters context */
+SK_IOC	IoC,	/* IO Context */
+char	*buf,	/* data buffer */
+int		Addr,	/* VPD start address */
+int		Len)	/* number of bytes to read / to write */
+{
+	int		i;
+	SK_U16	AdrReg;
+	int		Rtv;
+
+	for (i = 0; i < Len; i++, buf++) {
+		if ((i%sizeof(SK_U32)) == 0) {
+			/* New Address needs to be written to VPD_ADDR reg */
+			AdrReg = (SK_U16) Addr;
+			Addr += sizeof(SK_U32);
+			AdrReg &= ~VPD_WRITE;	/* READ operation */
+
+			VPD_OUT16(pAC, IoC, PCI_VPD_ADR_REG, AdrReg);
+
+			/* Wait for termination */
+			Rtv = VpdWait(pAC, IoC, VPD_READ);
+			if (Rtv != 0) {
+				return(i);
+			}
+		}
+		VPD_IN8(pAC, IoC, PCI_VPD_DAT_REG + (i%sizeof(SK_U32)),
+			(SK_U8 *)buf);
+	}
+
+	return(Len);
+}
+
+/*
+ *	Read ore writes 'len' bytes of VPD data, starting at 'addr' from
+ *	or to the I2C EEPROM.
+ *
+ * Returns number of bytes read / written.
+ */
+static int VpdTransferBlock(
+SK_AC	*pAC,	/* Adapters context */
+SK_IOC	IoC,	/* IO Context */
+char	*buf,	/* data buffer */
+int		addr,	/* VPD start address */
+int		len,	/* number of bytes to read / to write */
+int		dir)	/* transfer direction may be VPD_READ or VPD_WRITE */
+{
+	int		Rtv;	/* Return value */
+	int		vpd_rom_size;
+
+	SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_CTRL,
+		("VPD %s block, addr = 0x%x, len = %d\n",
+		dir ? "write" : "read", addr, len));
+
+	if (len == 0)
+		return(0);
+
+	vpd_rom_size = pAC->vpd.rom_size;
+	
+	if (addr > vpd_rom_size - 4) {
+		SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR | SK_DBGCAT_FATAL,
+			("Address error: 0x%x, exp. < 0x%x\n",
+			addr, vpd_rom_size - 4));
+		return(0);
+	}
+	
+	if (addr + len > vpd_rom_size) {
+		len = vpd_rom_size - addr;
+		SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR,
+			("Warning: len was cut to %d\n", len));
+	}
+
+	if (dir == VPD_READ) {
+		Rtv = VpdReadStream(pAC, IoC, buf, addr, len);
+	}
+	else {
+		Rtv = VpdWriteStream(pAC, IoC, buf, addr, len);
+	}
+
+	return(Rtv);
+}
+
+#ifdef SKDIAG
+
+/*
+ *	Read 'len' bytes of VPD data, starting at 'addr'.
+ *
+ * Returns number of bytes read.
+ */
+int VpdReadBlock(
+SK_AC	*pAC,	/* pAC pointer */
+SK_IOC	IoC,	/* IO Context */
+char	*buf,	/* buffer were the data should be stored */
+int		addr,	/* start reading at the VPD address */
+int		len)	/* number of bytes to read */
+{
+	return(VpdTransferBlock(pAC, IoC, buf, addr, len, VPD_READ));
+}
+
+/*
+ *	Write 'len' bytes of *but to the VPD EEPROM, starting at 'addr'.
+ *
+ * Returns number of bytes writes.
+ */
+int VpdWriteBlock(
+SK_AC	*pAC,	/* pAC pointer */
+SK_IOC	IoC,	/* IO Context */
+char	*buf,	/* buffer, holds the data to write */
+int		addr,	/* start writing at the VPD address */
+int		len)	/* number of bytes to write */
+{
+	return(VpdTransferBlock(pAC, IoC, buf, addr, len, VPD_WRITE));
+}
+#endif	/* SKDIAG */
+
+/*
+ * (re)initialize the VPD buffer
+ *
+ * Reads the VPD data from the EEPROM into the VPD buffer.
+ * Get the remaining read only and read / write space.
+ *
+ * return	0:	success
+ *		1:	fatal VPD error
+ */
+static int VpdInit(
+SK_AC	*pAC,	/* Adapters context */
+SK_IOC	IoC)	/* IO Context */
+{
+	SK_VPD_PARA *r, rp;	/* RW or RV */
+	int		i;
+	unsigned char	x;
+	int		vpd_size;
+	SK_U16	dev_id;
+	SK_U32	our_reg2;
+
+	SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_INIT, ("VpdInit .. "));
+	
+	VPD_IN16(pAC, IoC, PCI_DEVICE_ID, &dev_id);
+	
+	VPD_IN32(pAC, IoC, PCI_OUR_REG_2, &our_reg2);
+	
+	pAC->vpd.rom_size = 256 << ((our_reg2 & PCI_VPD_ROM_SZ) >> 14);
+	
+	/*
+	 * this function might get used before the hardware is initialized
+	 * therefore we cannot always trust in GIChipId
+	 */
+	if (((pAC->vpd.v.vpd_status & VPD_VALID) == 0 &&
+		dev_id != VPD_DEV_ID_GENESIS) ||
+		((pAC->vpd.v.vpd_status & VPD_VALID) != 0 &&
+		!pAC->GIni.GIGenesis)) {
+
+		/* for Yukon the VPD size is always 256 */
+		vpd_size = VPD_SIZE_YUKON;
+	}
+	else {
+		/* Genesis uses the maximum ROM size up to 512 for VPD */
+		if (pAC->vpd.rom_size > VPD_SIZE_GENESIS) {
+			vpd_size = VPD_SIZE_GENESIS;
+		}
+		else {
+			vpd_size = pAC->vpd.rom_size;
+		}
+	}
+
+	/* read the VPD data into the VPD buffer */
+	if (VpdTransferBlock(pAC, IoC, pAC->vpd.vpd_buf, 0, vpd_size, VPD_READ)
+		!= vpd_size) {
+
+		SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR,
+			("Block Read Error\n"));
+		return(1);
+	}
+	
+	pAC->vpd.vpd_size = vpd_size;
+
+	/* Asus K8V Se Deluxe bugfix. Correct VPD content */
+	/* MBo April 2004 */
+	if (((unsigned char)pAC->vpd.vpd_buf[0x3f] == 0x38) &&
+	    ((unsigned char)pAC->vpd.vpd_buf[0x40] == 0x3c) &&
+	    ((unsigned char)pAC->vpd.vpd_buf[0x41] == 0x45)) {
+		printk("sk98lin: Asus mainboard with buggy VPD? "
+				"Correcting data.\n");
+		pAC->vpd.vpd_buf[0x40] = 0x38;
+	}
+
+
+	/* find the end tag of the RO area */
+	if (!(r = vpd_find_para(pAC, VPD_RV, &rp))) {
+		SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR | SK_DBGCAT_FATAL,
+			("Encoding Error: RV Tag not found\n"));
+		return(1);
+	}
+	
+	if (r->p_val + r->p_len > pAC->vpd.vpd_buf + vpd_size/2) {
+		SK_DBG_MSG(pAC,SK_DBGMOD_VPD,SK_DBGCAT_ERR | SK_DBGCAT_FATAL,
+			("Encoding Error: Invalid VPD struct size\n"));
+		return(1);
+	}
+	pAC->vpd.v.vpd_free_ro = r->p_len - 1;
+
+	/* test the checksum */
+	for (i = 0, x = 0; (unsigned)i <= (unsigned)vpd_size/2 - r->p_len; i++) {
+		x += pAC->vpd.vpd_buf[i];
+	}
+	
+	if (x != 0) {
+		/* checksum error */
+		SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR | SK_DBGCAT_FATAL,
+			("VPD Checksum Error\n"));
+		return(1);
+	}
+
+	/* find and check the end tag of the RW area */
+	if (!(r = vpd_find_para(pAC, VPD_RW, &rp))) {
+		SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR | SK_DBGCAT_FATAL,
+			("Encoding Error: RV Tag not found\n"));
+		return(1);
+	}
+	
+	if (r->p_val < pAC->vpd.vpd_buf + vpd_size/2) {
+		SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR | SK_DBGCAT_FATAL,
+			("Encoding Error: Invalid VPD struct size\n"));
+		return(1);
+	}
+	pAC->vpd.v.vpd_free_rw = r->p_len;
+
+	/* everything seems to be ok */
+	if (pAC->GIni.GIChipId != 0) {
+		pAC->vpd.v.vpd_status |= VPD_VALID;
+	}
+
+	SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_INIT,
+		("done. Free RO = %d, Free RW = %d\n",
+		pAC->vpd.v.vpd_free_ro, pAC->vpd.v.vpd_free_rw));
+
+	return(0);
+}
+
+/*
+ *	find the Keyword 'key' in the VPD buffer and fills the
+ *	parameter struct 'p' with it's values
+ *
+ * returns	*p	success
+ *		0:	parameter was not found or VPD encoding error
+ */
+static SK_VPD_PARA *vpd_find_para(
+SK_AC		*pAC,	/* common data base */
+const char	*key,	/* keyword to find (e.g. "MN") */
+SK_VPD_PARA *p)		/* parameter description struct */
+{
+	char *v	;	/* points to VPD buffer */
+	int max;	/* Maximum Number of Iterations */
+
+	v = pAC->vpd.vpd_buf;
+	max = 128;
+
+	SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_CTRL,
+		("VPD find para %s .. ",key));
+
+	/* check mandatory resource type ID string (Product Name) */
+	if (*v != (char)RES_ID) {
+		SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR | SK_DBGCAT_FATAL,
+			("Error: 0x%x missing\n", RES_ID));
+		return NULL;
+	}
+
+	if (strcmp(key, VPD_NAME) == 0) {
+		p->p_len = VPD_GET_RES_LEN(v);
+		p->p_val = VPD_GET_VAL(v);
+		SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_CTRL,
+			("found, len = %d\n", p->p_len));
+		return(p);
+	}
+
+	v += 3 + VPD_GET_RES_LEN(v) + 3;
+	for (;; ) {
+		if (SK_MEMCMP(key,v,2) == 0) {
+			p->p_len = VPD_GET_VPD_LEN(v);
+			p->p_val = VPD_GET_VAL(v);
+			SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_CTRL,
+				("found, len = %d\n",p->p_len));
+			return(p);
+		}
+
+		/* exit when reaching the "RW" Tag or the maximum of itera. */
+		max--;
+		if (SK_MEMCMP(VPD_RW,v,2) == 0 || max == 0) {
+			break;
+		}
+
+		if (SK_MEMCMP(VPD_RV,v,2) == 0) {
+			v += 3 + VPD_GET_VPD_LEN(v) + 3;	/* skip VPD-W */
+		}
+		else {
+			v += 3 + VPD_GET_VPD_LEN(v);
+		}
+		SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_CTRL,
+			("scanning '%c%c' len = %d\n",v[0],v[1],v[2]));
+	}
+
+#ifdef DEBUG
+	SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_CTRL, ("not found\n"));
+	if (max == 0) {
+		SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR | SK_DBGCAT_FATAL,
+			("Key/Len Encoding error\n"));
+	}
+#endif /* DEBUG */
+	return NULL;
+}
+
+/*
+ *	Move 'n' bytes. Begin with the last byte if 'n' is > 0,
+ *	Start with the last byte if n is < 0.
+ *
+ * returns nothing
+ */
+static void vpd_move_para(
+char	*start,		/* start of memory block */
+char	*end,		/* end of memory block to move */
+int		n)			/* number of bytes the memory block has to be moved */
+{
+	char *p;
+	int i;		/* number of byte copied */
+
+	if (n == 0)
+		return;
+
+	i = (int) (end - start + 1);
+	if (n < 0) {
+		p = start + n;
+		while (i != 0) {
+			*p++ = *start++;
+			i--;
+		}
+	}
+	else {
+		p = end + n;
+		while (i != 0) {
+			*p-- = *end--;
+			i--;
+		}
+	}
+}
+
+/*
+ *	setup the VPD keyword 'key' at 'ip'.
+ *
+ * returns nothing
+ */
+static void vpd_insert_key(
+const char	*key,	/* keyword to insert */
+const char	*buf,	/* buffer with the keyword value */
+int		len,		/* length of the value string */
+char	*ip)		/* inseration point */
+{
+	SK_VPD_KEY *p;
+
+	p = (SK_VPD_KEY *) ip;
+	p->p_key[0] = key[0];
+	p->p_key[1] = key[1];
+	p->p_len = (unsigned char) len;
+	SK_MEMCPY(&p->p_val,buf,len);
+}
+
+/*
+ *	Setup the VPD end tag "RV" / "RW".
+ *	Also correct the remaining space variables vpd_free_ro / vpd_free_rw.
+ *
+ * returns	0:	success
+ *		1:	encoding error
+ */
+static int vpd_mod_endtag(
+SK_AC	*pAC,		/* common data base */
+char	*etp)		/* end pointer input position */
+{
+	SK_VPD_KEY *p;
+	unsigned char	x;
+	int	i;
+	int	vpd_size;
+
+	SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_CTRL,
+		("VPD modify endtag at 0x%x = '%c%c'\n",etp,etp[0],etp[1]));
+
+	vpd_size = pAC->vpd.vpd_size;
+
+	p = (SK_VPD_KEY *) etp;
+
+	if (p->p_key[0] != 'R' || (p->p_key[1] != 'V' && p->p_key[1] != 'W')) {
+		/* something wrong here, encoding error */
+		SK_DBG_MSG(pAC,SK_DBGMOD_VPD,SK_DBGCAT_ERR | SK_DBGCAT_FATAL,
+			("Encoding Error: invalid end tag\n"));
+		return(1);
+	}
+	if (etp > pAC->vpd.vpd_buf + vpd_size/2) {
+		/* create "RW" tag */
+		p->p_len = (unsigned char)(pAC->vpd.vpd_buf+vpd_size-etp-3-1);
+		pAC->vpd.v.vpd_free_rw = (int) p->p_len;
+		i = pAC->vpd.v.vpd_free_rw;
+		etp += 3;
+	}
+	else {
+		/* create "RV" tag */
+		p->p_len = (unsigned char)(pAC->vpd.vpd_buf+vpd_size/2-etp-3);
+		pAC->vpd.v.vpd_free_ro = (int) p->p_len - 1;
+
+		/* setup checksum */
+		for (i = 0, x = 0; i < vpd_size/2 - p->p_len; i++) {
+			x += pAC->vpd.vpd_buf[i];
+		}
+		p->p_val = (char) 0 - x;
+		i = pAC->vpd.v.vpd_free_ro;
+		etp += 4;
+	}
+	while (i) {
+		*etp++ = 0x00;
+		i--;
+	}
+
+	return(0);
+}
+
+/*
+ *	Insert a VPD keyword into the VPD buffer.
+ *
+ *	The keyword 'key' is inserted at the position 'ip' in the
+ *	VPD buffer.
+ *	The keywords behind the input position will
+ *	be moved. The VPD end tag "RV" or "RW" is generated again.
+ *
+ * returns	0:	success
+ *		2:	value string was cut
+ *		4:	VPD full, keyword was not written
+ *		6:	fatal VPD error
+ *
+ */
+static int	VpdSetupPara(
+SK_AC	*pAC,		/* common data base */
+const char	*key,	/* keyword to insert */
+const char	*buf,	/* buffer with the keyword value */
+int		len,		/* length of the keyword value */
+int		type,		/* VPD_RO_KEY or VPD_RW_KEY */
+int		op)			/* operation to do: ADD_KEY or OWR_KEY */
+{
+	SK_VPD_PARA vp;
+	char	*etp;		/* end tag position */
+	int	free;		/* remaining space in selected area */
+	char	*ip;		/* input position inside the VPD buffer */
+	int	rtv;		/* return code */
+	int	head;		/* additional haeder bytes to move */
+	int	found;		/* additinoal bytes if the keyword was found */
+	int vpd_size;
+
+	SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_CTRL,
+		("VPD setup para key = %s, val = %s\n",key,buf));
+	
+	vpd_size = pAC->vpd.vpd_size;
+
+	rtv = 0;
+	ip = NULL;
+	if (type == VPD_RW_KEY) {
+		/* end tag is "RW" */
+		free = pAC->vpd.v.vpd_free_rw;
+		etp = pAC->vpd.vpd_buf + (vpd_size - free - 1 - 3);
+	}
+	else {
+		/* end tag is "RV" */
+		free = pAC->vpd.v.vpd_free_ro;
+		etp = pAC->vpd.vpd_buf + (vpd_size/2 - free - 4);
+	}
+	SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_CTRL,
+		("Free RO = %d, Free RW = %d\n",
+		pAC->vpd.v.vpd_free_ro, pAC->vpd.v.vpd_free_rw));
+
+	head = 0;
+	found = 0;
+	if (op == OWR_KEY) {
+		if (vpd_find_para(pAC, key, &vp)) {
+			found = 3;
+			ip = vp.p_val - 3;
+			free += vp.p_len + 3;
+			SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_CTRL,
+				("Overwrite Key\n"));
+		}
+		else {
+			op = ADD_KEY;
+			SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_CTRL,
+				("Add Key\n"));
+		}
+	}
+	if (op == ADD_KEY) {
+		ip = etp;
+		vp.p_len = 0;
+		head = 3;
+	}
+
+	if (len + 3 > free) {
+		if (free < 7) {
+			SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR,
+				("VPD Buffer Overflow, keyword not written\n"));
+			return(4);
+		}
+		/* cut it again */
+		len = free - 3;
+		rtv = 2;
+		SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR,
+			("VPD Buffer Full, Keyword was cut\n"));
+	}
+
+	vpd_move_para(ip + vp.p_len + found, etp+2, len-vp.p_len+head);
+	vpd_insert_key(key, buf, len, ip);
+	if (vpd_mod_endtag(pAC, etp + len - vp.p_len + head)) {
+		pAC->vpd.v.vpd_status &= ~VPD_VALID;
+		SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR,
+			("VPD Encoding Error\n"));
+		return(6);
+	}
+
+	return(rtv);
+}
+
+
+/*
+ *	Read the contents of the VPD EEPROM and copy it to the
+ *	VPD buffer if not already done.
+ *
+ * return:	A pointer to the vpd_status structure. The structure contains
+ *		this fields.
+ */
+SK_VPD_STATUS *VpdStat(
+SK_AC	*pAC,	/* Adapters context */
+SK_IOC	IoC)	/* IO Context */
+{
+	if ((pAC->vpd.v.vpd_status & VPD_VALID) == 0) {
+		(void)VpdInit(pAC, IoC);
+	}
+	return(&pAC->vpd.v);
+}
+
+
+/*
+ *	Read the contents of the VPD EEPROM and copy it to the VPD
+ *	buffer if not already done.
+ *	Scan the VPD buffer for VPD keywords and create the VPD
+ *	keyword list by copying the keywords to 'buf', all after
+ *	each other and terminated with a '\0'.
+ *
+ * Exceptions:	o The Resource Type ID String (product name) is called "Name"
+ *		o The VPD end tags 'RV' and 'RW' are not listed
+ *
+ *	The number of copied keywords is counted in 'elements'.
+ *
+ * returns	0:	success
+ *		2:	buffer overfull, one or more keywords are missing
+ *		6:	fatal VPD error
+ *
+ *	example values after returning:
+ *
+ *		buf =	"Name\0PN\0EC\0MN\0SN\0CP\0VF\0VL\0YA\0"
+ *		*len =		30
+ *		*elements =	 9
+ */
+int VpdKeys(
+SK_AC	*pAC,		/* common data base */
+SK_IOC	IoC,		/* IO Context */
+char	*buf,		/* buffer where to copy the keywords */
+int		*len,		/* buffer length */
+int		*elements)	/* number of keywords returned */
+{
+	char *v;
+	int n;
+
+	SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_RX, ("list VPD keys .. "));
+	*elements = 0;
+	if ((pAC->vpd.v.vpd_status & VPD_VALID) == 0) {
+		if (VpdInit(pAC, IoC) != 0) {
+			*len = 0;
+			SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR,
+				("VPD Init Error, terminated\n"));
+			return(6);
+		}
+	}
+
+	if ((signed)strlen(VPD_NAME) + 1 <= *len) {
+		v = pAC->vpd.vpd_buf;
+		strcpy(buf,VPD_NAME);
+		n = strlen(VPD_NAME) + 1;
+		buf += n;
+		*elements = 1;
+		SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_RX,
+			("'%c%c' ",v[0],v[1]));
+	}
+	else {
+		*len = 0;
+		SK_DBG_MSG(pAC,SK_DBGMOD_VPD,SK_DBGCAT_ERR,
+			("buffer overflow\n"));
+		return(2);
+	}
+
+	v += 3 + VPD_GET_RES_LEN(v) + 3;
+	for (;; ) {
+		/* exit when reaching the "RW" Tag */
+		if (SK_MEMCMP(VPD_RW,v,2) == 0) {
+			break;
+		}
+
+		if (SK_MEMCMP(VPD_RV,v,2) == 0) {
+			v += 3 + VPD_GET_VPD_LEN(v) + 3;	/* skip VPD-W */
+			continue;
+		}
+
+		if (n+3 <= *len) {
+			SK_MEMCPY(buf,v,2);
+			buf += 2;
+			*buf++ = '\0';
+			n += 3;
+			v += 3 + VPD_GET_VPD_LEN(v);
+			*elements += 1;
+			SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_RX,
+				("'%c%c' ",v[0],v[1]));
+		}
+		else {
+			*len = n;
+			SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR,
+				("buffer overflow\n"));
+			return(2);
+		}
+	}
+
+	SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_RX, ("\n"));
+	*len = n;
+	return(0);
+}
+
+
+/*
+ *	Read the contents of the VPD EEPROM and copy it to the
+ *	VPD buffer if not already done. Search for the VPD keyword
+ *	'key' and copy its value to 'buf'. Add a terminating '\0'.
+ *	If the value does not fit into the buffer cut it after
+ *	'len' - 1 bytes.
+ *
+ * returns	0:	success
+ *		1:	keyword not found
+ *		2:	value string was cut
+ *		3:	VPD transfer timeout
+ *		6:	fatal VPD error
+ */
+int VpdRead(
+SK_AC		*pAC,	/* common data base */
+SK_IOC		IoC,	/* IO Context */
+const char	*key,	/* keyword to read (e.g. "MN") */
+char		*buf,	/* buffer where to copy the keyword value */
+int			*len)	/* buffer length */
+{
+	SK_VPD_PARA *p, vp;
+
+	SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_RX, ("VPD read %s .. ", key));
+	if ((pAC->vpd.v.vpd_status & VPD_VALID) == 0) {
+		if (VpdInit(pAC, IoC) != 0) {
+			*len = 0;
+			SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR,
+				("VPD init error\n"));
+			return(6);
+		}
+	}
+
+	if ((p = vpd_find_para(pAC, key, &vp)) != NULL) {
+		if (p->p_len > (*(unsigned *)len)-1) {
+			p->p_len = *len - 1;
+		}
+		SK_MEMCPY(buf, p->p_val, p->p_len);
+		buf[p->p_len] = '\0';
+		*len = p->p_len;
+		SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_RX,
+			("%c%c%c%c.., len = %d\n",
+			buf[0],buf[1],buf[2],buf[3],*len));
+	}
+	else {
+		*len = 0;
+		SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR, ("not found\n"));
+		return(1);
+	}
+	return(0);
+}
+
+
+/*
+ *	Check whether a given key may be written
+ *
+ * returns
+ *	SK_TRUE		Yes it may be written
+ *	SK_FALSE	No it may be written
+ */
+SK_BOOL VpdMayWrite(
+char	*key)	/* keyword to write (allowed values "Yx", "Vx") */
+{
+	if ((*key != 'Y' && *key != 'V') ||
+		key[1] < '0' || key[1] > 'Z' ||
+		(key[1] > '9' && key[1] < 'A') || strlen(key) != 2) {
+
+		return(SK_FALSE);
+	}
+	return(SK_TRUE);
+}
+
+/*
+ *	Read the contents of the VPD EEPROM and copy it to the VPD
+ *	buffer if not already done. Insert/overwrite the keyword 'key'
+ *	in the VPD buffer. Cut the keyword value if it does not fit
+ *	into the VPD read / write area.
+ *
+ * returns	0:	success
+ *		2:	value string was cut
+ *		3:	VPD transfer timeout
+ *		4:	VPD full, keyword was not written
+ *		5:	keyword cannot be written
+ *		6:	fatal VPD error
+ */
+int VpdWrite(
+SK_AC		*pAC,	/* common data base */
+SK_IOC		IoC,	/* IO Context */
+const char	*key,	/* keyword to write (allowed values "Yx", "Vx") */
+const char	*buf)	/* buffer where the keyword value can be read from */
+{
+	int len;		/* length of the keyword to write */
+	int rtv;		/* return code */
+	int rtv2;
+
+	SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_TX,
+		("VPD write %s = %s\n",key,buf));
+
+	if ((*key != 'Y' && *key != 'V') ||
+		key[1] < '0' || key[1] > 'Z' ||
+		(key[1] > '9' && key[1] < 'A') || strlen(key) != 2) {
+
+		SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR,
+			("illegal key tag, keyword not written\n"));
+		return(5);
+	}
+
+	if ((pAC->vpd.v.vpd_status & VPD_VALID) == 0) {
+		if (VpdInit(pAC, IoC) != 0) {
+			SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR,
+				("VPD init error\n"));
+			return(6);
+		}
+	}
+
+	rtv = 0;
+	len = strlen(buf);
+	if (len > VPD_MAX_LEN) {
+		/* cut it */
+		len = VPD_MAX_LEN;
+		rtv = 2;
+		SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR,
+			("keyword too long, cut after %d bytes\n",VPD_MAX_LEN));
+	}
+	if ((rtv2 = VpdSetupPara(pAC, key, buf, len, VPD_RW_KEY, OWR_KEY)) != 0) {
+		SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR,
+			("VPD write error\n"));
+		return(rtv2);
+	}
+
+	return(rtv);
+}
+
+/*
+ *	Read the contents of the VPD EEPROM and copy it to the
+ *	VPD buffer if not already done. Remove the VPD keyword
+ *	'key' from the VPD buffer.
+ *	Only the keywords in the read/write area can be deleted.
+ *	Keywords in the read only area cannot be deleted.
+ *
+ * returns	0:	success, keyword was removed
+ *		1:	keyword not found
+ *		5:	keyword cannot be deleted
+ *		6:	fatal VPD error
+ */
+int VpdDelete(
+SK_AC	*pAC,	/* common data base */
+SK_IOC	IoC,	/* IO Context */
+char	*key)	/* keyword to read (e.g. "MN") */
+{
+	SK_VPD_PARA *p, vp;
+	char *etp;
+	int	vpd_size;
+
+	vpd_size = pAC->vpd.vpd_size;
+
+	SK_DBG_MSG(pAC,SK_DBGMOD_VPD,SK_DBGCAT_TX,("VPD delete key %s\n",key));
+	if ((pAC->vpd.v.vpd_status & VPD_VALID) == 0) {
+		if (VpdInit(pAC, IoC) != 0) {
+			SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR,
+				("VPD init error\n"));
+			return(6);
+		}
+	}
+
+	if ((p = vpd_find_para(pAC, key, &vp)) != NULL) {
+		if (p->p_val < pAC->vpd.vpd_buf + vpd_size/2) {
+			/* try to delete read only keyword */
+			SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR,
+				("cannot delete RO keyword\n"));
+			return(5);
+		}
+
+		etp = pAC->vpd.vpd_buf + (vpd_size-pAC->vpd.v.vpd_free_rw-1-3);
+
+		vpd_move_para(vp.p_val+vp.p_len, etp+2,
+			- ((int)(vp.p_len + 3)));
+		if (vpd_mod_endtag(pAC, etp - vp.p_len - 3)) {
+			pAC->vpd.v.vpd_status &= ~VPD_VALID;
+			SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR,
+				("VPD encoding error\n"));
+			return(6);
+		}
+	}
+	else {
+		SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR,
+			("keyword not found\n"));
+		return(1);
+	}
+
+	return(0);
+}
+
+/*
+ *	If the VPD buffer contains valid data write the VPD
+ *	read/write area back to the VPD EEPROM.
+ *
+ * returns	0:	success
+ *		3:	VPD transfer timeout
+ */
+int VpdUpdate(
+SK_AC	*pAC,	/* Adapters context */
+SK_IOC	IoC)	/* IO Context */
+{
+	int vpd_size;
+
+	vpd_size = pAC->vpd.vpd_size;
+
+	SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_TX, ("VPD update .. "));
+	if ((pAC->vpd.v.vpd_status & VPD_VALID) != 0) {
+		if (VpdTransferBlock(pAC, IoC, pAC->vpd.vpd_buf + vpd_size/2,
+			vpd_size/2, vpd_size/2, VPD_WRITE) != vpd_size/2) {
+
+			SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR,
+				("transfer timed out\n"));
+			return(3);
+		}
+	}
+	SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_TX, ("done\n"));
+	return(0);
+}
+
diff --git a/drivers/net/sk98lin/skxmac2.c b/drivers/net/sk98lin/skxmac2.c
new file mode 100644
index 0000000..b4e7502
--- /dev/null
+++ b/drivers/net/sk98lin/skxmac2.c
@@ -0,0 +1,4160 @@
+/******************************************************************************
+ *
+ * Name:	skxmac2.c
+ * Project:	Gigabit Ethernet Adapters, Common Modules
+ * Version:	$Revision: 1.102 $
+ * Date:	$Date: 2003/10/02 16:53:58 $
+ * Purpose:	Contains functions to initialize the MACs and PHYs
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *	(C)Copyright 1998-2002 SysKonnect.
+ *	(C)Copyright 2002-2003 Marvell.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+#include "h/skdrv1st.h"
+#include "h/skdrv2nd.h"
+
+/* typedefs *******************************************************************/
+
+/* BCOM PHY magic pattern list */
+typedef struct s_PhyHack {
+	int		PhyReg;		/* Phy register */
+	SK_U16	PhyVal;		/* Value to write */
+} BCOM_HACK;
+
+/* local variables ************************************************************/
+
+#if (defined(DEBUG) || ((!defined(LINT)) && (!defined(SK_SLIM))))
+static const char SysKonnectFileId[] =
+	"@(#) $Id: skxmac2.c,v 1.102 2003/10/02 16:53:58 rschmidt Exp $ (C) Marvell.";
+#endif
+
+#ifdef GENESIS
+static BCOM_HACK BcomRegA1Hack[] = {
+ { 0x18, 0x0c20 }, { 0x17, 0x0012 }, { 0x15, 0x1104 }, { 0x17, 0x0013 },
+ { 0x15, 0x0404 }, { 0x17, 0x8006 }, { 0x15, 0x0132 }, { 0x17, 0x8006 },
+ { 0x15, 0x0232 }, { 0x17, 0x800D }, { 0x15, 0x000F }, { 0x18, 0x0420 },
+ { 0, 0 }
+};
+static BCOM_HACK BcomRegC0Hack[] = {
+ { 0x18, 0x0c20 }, { 0x17, 0x0012 }, { 0x15, 0x1204 }, { 0x17, 0x0013 },
+ { 0x15, 0x0A04 }, { 0x18, 0x0420 },
+ { 0, 0 }
+};
+#endif
+
+/* function prototypes ********************************************************/
+#ifdef GENESIS
+static void	SkXmInitPhyXmac(SK_AC*, SK_IOC, int, SK_BOOL);
+static void	SkXmInitPhyBcom(SK_AC*, SK_IOC, int, SK_BOOL);
+static int	SkXmAutoNegDoneXmac(SK_AC*, SK_IOC, int);
+static int	SkXmAutoNegDoneBcom(SK_AC*, SK_IOC, int);
+#endif /* GENESIS */
+#ifdef YUKON
+static void	SkGmInitPhyMarv(SK_AC*, SK_IOC, int, SK_BOOL);
+static int	SkGmAutoNegDoneMarv(SK_AC*, SK_IOC, int);
+#endif /* YUKON */
+#ifdef OTHER_PHY
+static void	SkXmInitPhyLone(SK_AC*, SK_IOC, int, SK_BOOL);
+static void	SkXmInitPhyNat (SK_AC*, SK_IOC, int, SK_BOOL);
+static int	SkXmAutoNegDoneLone(SK_AC*, SK_IOC, int);
+static int	SkXmAutoNegDoneNat (SK_AC*, SK_IOC, int);
+#endif /* OTHER_PHY */
+
+
+#ifdef GENESIS
+/******************************************************************************
+ *
+ *	SkXmPhyRead() - Read from XMAC PHY register
+ *
+ * Description:	reads a 16-bit word from XMAC PHY or ext. PHY
+ *
+ * Returns:
+ *	nothing
+ */
+void SkXmPhyRead(
+SK_AC	*pAC,			/* Adapter Context */
+SK_IOC	IoC,			/* I/O Context */
+int		Port,			/* Port Index (MAC_1 + n) */
+int		PhyReg,			/* Register Address (Offset) */
+SK_U16	SK_FAR *pVal)	/* Pointer to Value */
+{
+	SK_U16		Mmu;
+	SK_GEPORT	*pPrt;
+
+	pPrt = &pAC->GIni.GP[Port];
+	
+	/* write the PHY register's address */
+	XM_OUT16(IoC, Port, XM_PHY_ADDR, PhyReg | pPrt->PhyAddr);
+	
+	/* get the PHY register's value */
+	XM_IN16(IoC, Port, XM_PHY_DATA, pVal);
+	
+	if (pPrt->PhyType != SK_PHY_XMAC) {
+		do {
+			XM_IN16(IoC, Port, XM_MMU_CMD, &Mmu);
+			/* wait until 'Ready' is set */
+		} while ((Mmu & XM_MMU_PHY_RDY) == 0);
+
+		/* get the PHY register's value */
+		XM_IN16(IoC, Port, XM_PHY_DATA, pVal);
+	}
+}	/* SkXmPhyRead */
+
+
+/******************************************************************************
+ *
+ *	SkXmPhyWrite() - Write to XMAC PHY register
+ *
+ * Description:	writes a 16-bit word to XMAC PHY or ext. PHY
+ *
+ * Returns:
+ *	nothing
+ */
+void SkXmPhyWrite(
+SK_AC	*pAC,		/* Adapter Context */
+SK_IOC	IoC,		/* I/O Context */
+int		Port,		/* Port Index (MAC_1 + n) */
+int		PhyReg,		/* Register Address (Offset) */
+SK_U16	Val)		/* Value */
+{
+	SK_U16		Mmu;
+	SK_GEPORT	*pPrt;
+
+	pPrt = &pAC->GIni.GP[Port];
+	
+	if (pPrt->PhyType != SK_PHY_XMAC) {
+		do {
+			XM_IN16(IoC, Port, XM_MMU_CMD, &Mmu);
+			/* wait until 'Busy' is cleared */
+		} while ((Mmu & XM_MMU_PHY_BUSY) != 0);
+	}
+	
+	/* write the PHY register's address */
+	XM_OUT16(IoC, Port, XM_PHY_ADDR, PhyReg | pPrt->PhyAddr);
+	
+	/* write the PHY register's value */
+	XM_OUT16(IoC, Port, XM_PHY_DATA, Val);
+	
+	if (pPrt->PhyType != SK_PHY_XMAC) {
+		do {
+			XM_IN16(IoC, Port, XM_MMU_CMD, &Mmu);
+			/* wait until 'Busy' is cleared */
+		} while ((Mmu & XM_MMU_PHY_BUSY) != 0);
+	}
+}	/* SkXmPhyWrite */
+#endif /* GENESIS */
+
+
+#ifdef YUKON
+/******************************************************************************
+ *
+ *	SkGmPhyRead() - Read from GPHY register
+ *
+ * Description:	reads a 16-bit word from GPHY through MDIO
+ *
+ * Returns:
+ *	nothing
+ */
+void SkGmPhyRead(
+SK_AC	*pAC,			/* Adapter Context */
+SK_IOC	IoC,			/* I/O Context */
+int		Port,			/* Port Index (MAC_1 + n) */
+int		PhyReg,			/* Register Address (Offset) */
+SK_U16	SK_FAR *pVal)	/* Pointer to Value */
+{
+	SK_U16	Ctrl;
+	SK_GEPORT	*pPrt;
+#ifdef VCPU
+	u_long SimCyle;
+	u_long SimLowTime;
+	
+	VCPUgetTime(&SimCyle, &SimLowTime);
+	VCPUprintf(0, "SkGmPhyRead(%u), SimCyle=%u, SimLowTime=%u\n",
+		PhyReg, SimCyle, SimLowTime);
+#endif /* VCPU */
+	
+	pPrt = &pAC->GIni.GP[Port];
+	
+	/* set PHY-Register offset and 'Read' OpCode (= 1) */
+	*pVal = (SK_U16)(GM_SMI_CT_PHY_AD(pPrt->PhyAddr) |
+		GM_SMI_CT_REG_AD(PhyReg) | GM_SMI_CT_OP_RD);
+
+	GM_OUT16(IoC, Port, GM_SMI_CTRL, *pVal);
+
+	GM_IN16(IoC, Port, GM_SMI_CTRL, &Ctrl);
+	
+	/* additional check for MDC/MDIO activity */
+	if ((Ctrl & GM_SMI_CT_BUSY) == 0) {
+		*pVal = 0;
+		return;
+	}
+
+	*pVal |= GM_SMI_CT_BUSY;
+	
+	do {
+#ifdef VCPU
+		VCPUwaitTime(1000);
+#endif /* VCPU */
+
+		GM_IN16(IoC, Port, GM_SMI_CTRL, &Ctrl);
+
+	/* wait until 'ReadValid' is set */
+	} while (Ctrl == *pVal);
+	
+	/* get the PHY register's value */
+	GM_IN16(IoC, Port, GM_SMI_DATA, pVal);
+
+#ifdef VCPU
+	VCPUgetTime(&SimCyle, &SimLowTime);
+	VCPUprintf(0, "VCPUgetTime(), SimCyle=%u, SimLowTime=%u\n",
+		SimCyle, SimLowTime);
+#endif /* VCPU */
+
+}	/* SkGmPhyRead */
+
+
+/******************************************************************************
+ *
+ *	SkGmPhyWrite() - Write to GPHY register
+ *
+ * Description:	writes a 16-bit word to GPHY through MDIO
+ *
+ * Returns:
+ *	nothing
+ */
+void SkGmPhyWrite(
+SK_AC	*pAC,		/* Adapter Context */
+SK_IOC	IoC,		/* I/O Context */
+int		Port,		/* Port Index (MAC_1 + n) */
+int		PhyReg,		/* Register Address (Offset) */
+SK_U16	Val)		/* Value */
+{
+	SK_U16	Ctrl;
+	SK_GEPORT	*pPrt;
+#ifdef VCPU
+	SK_U32	DWord;
+	u_long	SimCyle;
+	u_long	SimLowTime;
+	
+	VCPUgetTime(&SimCyle, &SimLowTime);
+	VCPUprintf(0, "SkGmPhyWrite(Reg=%u, Val=0x%04x), SimCyle=%u, SimLowTime=%u\n",
+		PhyReg, Val, SimCyle, SimLowTime);
+#endif /* VCPU */
+	
+	pPrt = &pAC->GIni.GP[Port];
+	
+	/* write the PHY register's value */
+	GM_OUT16(IoC, Port, GM_SMI_DATA, Val);
+	
+	/* set PHY-Register offset and 'Write' OpCode (= 0) */
+	Val = GM_SMI_CT_PHY_AD(pPrt->PhyAddr) | GM_SMI_CT_REG_AD(PhyReg);
+
+	GM_OUT16(IoC, Port, GM_SMI_CTRL, Val);
+
+	GM_IN16(IoC, Port, GM_SMI_CTRL, &Ctrl);
+	
+	/* additional check for MDC/MDIO activity */
+	if ((Ctrl & GM_SMI_CT_BUSY) == 0) {
+		return;
+	}
+	
+	Val |= GM_SMI_CT_BUSY;
+
+	do {
+#ifdef VCPU
+		/* read Timer value */
+		SK_IN32(IoC, B2_TI_VAL, &DWord);
+
+		VCPUwaitTime(1000);
+#endif /* VCPU */
+
+		GM_IN16(IoC, Port, GM_SMI_CTRL, &Ctrl);
+
+	/* wait until 'Busy' is cleared */
+	} while (Ctrl == Val);
+	
+#ifdef VCPU
+	VCPUgetTime(&SimCyle, &SimLowTime);
+	VCPUprintf(0, "VCPUgetTime(), SimCyle=%u, SimLowTime=%u\n",
+		SimCyle, SimLowTime);
+#endif /* VCPU */
+
+}	/* SkGmPhyWrite */
+#endif /* YUKON */
+
+
+#ifdef SK_DIAG
+/******************************************************************************
+ *
+ *	SkGePhyRead() - Read from PHY register
+ *
+ * Description:	calls a read PHY routine dep. on board type
+ *
+ * Returns:
+ *	nothing
+ */
+void SkGePhyRead(
+SK_AC	*pAC,		/* Adapter Context */
+SK_IOC	IoC,		/* I/O Context */
+int		Port,		/* Port Index (MAC_1 + n) */
+int		PhyReg,		/* Register Address (Offset) */
+SK_U16	*pVal)		/* Pointer to Value */
+{
+	void (*r_func)(SK_AC *pAC, SK_IOC IoC, int Port, int Reg, SK_U16 *pVal);
+
+	if (pAC->GIni.GIGenesis) {
+		r_func = SkXmPhyRead;
+	}
+	else {
+		r_func = SkGmPhyRead;
+	}
+	
+	r_func(pAC, IoC, Port, PhyReg, pVal);
+}	/* SkGePhyRead */
+
+
+/******************************************************************************
+ *
+ *	SkGePhyWrite() - Write to PHY register
+ *
+ * Description:	calls a write PHY routine dep. on board type
+ *
+ * Returns:
+ *	nothing
+ */
+void SkGePhyWrite(
+SK_AC	*pAC,		/* Adapter Context */
+SK_IOC	IoC,		/* I/O Context */
+int		Port,		/* Port Index (MAC_1 + n) */
+int		PhyReg,		/* Register Address (Offset) */
+SK_U16	Val)		/* Value */
+{
+	void (*w_func)(SK_AC *pAC, SK_IOC IoC, int Port, int Reg, SK_U16 Val);
+
+	if (pAC->GIni.GIGenesis) {
+		w_func = SkXmPhyWrite;
+	}
+	else {
+		w_func = SkGmPhyWrite;
+	}
+	
+	w_func(pAC, IoC, Port, PhyReg, Val);
+}	/* SkGePhyWrite */
+#endif /* SK_DIAG */
+
+
+/******************************************************************************
+ *
+ *	SkMacPromiscMode() - Enable / Disable Promiscuous Mode
+ *
+ * Description:
+ *   enables / disables promiscuous mode by setting Mode Register (XMAC) or
+ *   Receive Control Register (GMAC) dep. on board type   	
+ *
+ * Returns:
+ *	nothing
+ */
+void SkMacPromiscMode(
+SK_AC	*pAC,	/* adapter context */
+SK_IOC	IoC,	/* IO context */
+int		Port,	/* Port Index (MAC_1 + n) */
+SK_BOOL	Enable)	/* Enable / Disable */
+{
+#ifdef YUKON
+	SK_U16	RcReg;
+#endif
+#ifdef GENESIS
+	SK_U32	MdReg;
+#endif	
+
+#ifdef GENESIS
+	if (pAC->GIni.GIGenesis) {
+		
+		XM_IN32(IoC, Port, XM_MODE, &MdReg);
+		/* enable or disable promiscuous mode */
+		if (Enable) {
+			MdReg |= XM_MD_ENA_PROM;
+		}
+		else {
+			MdReg &= ~XM_MD_ENA_PROM;
+		}
+		/* setup Mode Register */
+		XM_OUT32(IoC, Port, XM_MODE, MdReg);
+	}
+#endif /* GENESIS */
+	
+#ifdef YUKON
+	if (pAC->GIni.GIYukon) {
+		
+		GM_IN16(IoC, Port, GM_RX_CTRL, &RcReg);
+		
+		/* enable or disable unicast and multicast filtering */
+		if (Enable) {
+			RcReg &= ~(GM_RXCR_UCF_ENA | GM_RXCR_MCF_ENA);
+		}
+		else {
+			RcReg |= (GM_RXCR_UCF_ENA | GM_RXCR_MCF_ENA);
+		}
+		/* setup Receive Control Register */
+		GM_OUT16(IoC, Port, GM_RX_CTRL, RcReg);
+	}
+#endif /* YUKON */
+
+}	/* SkMacPromiscMode*/
+
+
+/******************************************************************************
+ *
+ *	SkMacHashing() - Enable / Disable Hashing
+ *
+ * Description:
+ *   enables / disables hashing by setting Mode Register (XMAC) or
+ *   Receive Control Register (GMAC) dep. on board type		
+ *
+ * Returns:
+ *	nothing
+ */
+void SkMacHashing(
+SK_AC	*pAC,	/* adapter context */
+SK_IOC	IoC,	/* IO context */
+int		Port,	/* Port Index (MAC_1 + n) */
+SK_BOOL	Enable)	/* Enable / Disable */
+{
+#ifdef YUKON
+	SK_U16	RcReg;
+#endif	
+#ifdef GENESIS
+	SK_U32	MdReg;
+#endif
+
+#ifdef GENESIS
+	if (pAC->GIni.GIGenesis) {
+		
+		XM_IN32(IoC, Port, XM_MODE, &MdReg);
+		/* enable or disable hashing */
+		if (Enable) {
+			MdReg |= XM_MD_ENA_HASH;
+		}
+		else {
+			MdReg &= ~XM_MD_ENA_HASH;
+		}
+		/* setup Mode Register */
+		XM_OUT32(IoC, Port, XM_MODE, MdReg);
+	}
+#endif /* GENESIS */
+	
+#ifdef YUKON
+	if (pAC->GIni.GIYukon) {
+		
+		GM_IN16(IoC, Port, GM_RX_CTRL, &RcReg);
+		
+		/* enable or disable multicast filtering */
+		if (Enable) {
+			RcReg |= GM_RXCR_MCF_ENA;
+		}
+		else {
+			RcReg &= ~GM_RXCR_MCF_ENA;
+		}
+		/* setup Receive Control Register */
+		GM_OUT16(IoC, Port, GM_RX_CTRL, RcReg);
+	}
+#endif /* YUKON */
+
+}	/* SkMacHashing*/
+
+
+#ifdef SK_DIAG
+/******************************************************************************
+ *
+ *	SkXmSetRxCmd() - Modify the value of the XMAC's Rx Command Register
+ *
+ * Description:
+ *	The features
+ *	 - FCS stripping,					SK_STRIP_FCS_ON/OFF
+ *	 - pad byte stripping,				SK_STRIP_PAD_ON/OFF
+ *	 - don't set XMR_FS_ERR in status	SK_LENERR_OK_ON/OFF
+ *	   for inrange length error frames
+ *	 - don't set XMR_FS_ERR in status	SK_BIG_PK_OK_ON/OFF
+ *	   for frames > 1514 bytes
+ *   - enable Rx of own packets         SK_SELF_RX_ON/OFF
+ *
+ *	for incoming packets may be enabled/disabled by this function.
+ *	Additional modes may be added later.
+ *	Multiple modes can be enabled/disabled at the same time.
+ *	The new configuration is written to the Rx Command register immediately.
+ *
+ * Returns:
+ *	nothing
+ */
+static void SkXmSetRxCmd(
+SK_AC	*pAC,		/* adapter context */
+SK_IOC	IoC,		/* IO context */
+int		Port,		/* Port Index (MAC_1 + n) */
+int		Mode)		/* Mode is SK_STRIP_FCS_ON/OFF, SK_STRIP_PAD_ON/OFF,
+					   SK_LENERR_OK_ON/OFF, or SK_BIG_PK_OK_ON/OFF */
+{
+	SK_U16	OldRxCmd;
+	SK_U16	RxCmd;
+
+	XM_IN16(IoC, Port, XM_RX_CMD, &OldRxCmd);
+
+	RxCmd = OldRxCmd;
+	
+	switch (Mode & (SK_STRIP_FCS_ON | SK_STRIP_FCS_OFF)) {
+	case SK_STRIP_FCS_ON:
+		RxCmd |= XM_RX_STRIP_FCS;
+		break;
+	case SK_STRIP_FCS_OFF:
+		RxCmd &= ~XM_RX_STRIP_FCS;
+		break;
+	}
+
+	switch (Mode & (SK_STRIP_PAD_ON | SK_STRIP_PAD_OFF)) {
+	case SK_STRIP_PAD_ON:
+		RxCmd |= XM_RX_STRIP_PAD;
+		break;
+	case SK_STRIP_PAD_OFF:
+		RxCmd &= ~XM_RX_STRIP_PAD;
+		break;
+	}
+
+	switch (Mode & (SK_LENERR_OK_ON | SK_LENERR_OK_OFF)) {
+	case SK_LENERR_OK_ON:
+		RxCmd |= XM_RX_LENERR_OK;
+		break;
+	case SK_LENERR_OK_OFF:
+		RxCmd &= ~XM_RX_LENERR_OK;
+		break;
+	}
+
+	switch (Mode & (SK_BIG_PK_OK_ON | SK_BIG_PK_OK_OFF)) {
+	case SK_BIG_PK_OK_ON:
+		RxCmd |= XM_RX_BIG_PK_OK;
+		break;
+	case SK_BIG_PK_OK_OFF:
+		RxCmd &= ~XM_RX_BIG_PK_OK;
+		break;
+	}
+
+	switch (Mode & (SK_SELF_RX_ON | SK_SELF_RX_OFF)) {
+	case SK_SELF_RX_ON:
+		RxCmd |= XM_RX_SELF_RX;
+		break;
+	case SK_SELF_RX_OFF:
+		RxCmd &= ~XM_RX_SELF_RX;
+		break;
+	}
+
+	/* Write the new mode to the Rx command register if required */
+	if (OldRxCmd != RxCmd) {
+		XM_OUT16(IoC, Port, XM_RX_CMD, RxCmd);
+	}
+}	/* SkXmSetRxCmd */
+
+
+/******************************************************************************
+ *
+ *	SkGmSetRxCmd() - Modify the value of the GMAC's Rx Control Register
+ *
+ * Description:
+ *	The features
+ *	 - FCS (CRC) stripping,				SK_STRIP_FCS_ON/OFF
+ *	 - don't set GMR_FS_LONG_ERR		SK_BIG_PK_OK_ON/OFF
+ *	   for frames > 1514 bytes
+ *   - enable Rx of own packets         SK_SELF_RX_ON/OFF
+ *
+ *	for incoming packets may be enabled/disabled by this function.
+ *	Additional modes may be added later.
+ *	Multiple modes can be enabled/disabled at the same time.
+ *	The new configuration is written to the Rx Command register immediately.
+ *
+ * Returns:
+ *	nothing
+ */
+static void SkGmSetRxCmd(
+SK_AC	*pAC,		/* adapter context */
+SK_IOC	IoC,		/* IO context */
+int		Port,		/* Port Index (MAC_1 + n) */
+int		Mode)		/* Mode is SK_STRIP_FCS_ON/OFF, SK_STRIP_PAD_ON/OFF,
+					   SK_LENERR_OK_ON/OFF, or SK_BIG_PK_OK_ON/OFF */
+{
+	SK_U16	OldRxCmd;
+	SK_U16	RxCmd;
+
+	if ((Mode & (SK_STRIP_FCS_ON | SK_STRIP_FCS_OFF)) != 0) {
+		
+		GM_IN16(IoC, Port, GM_RX_CTRL, &OldRxCmd);
+
+		RxCmd = OldRxCmd;
+
+		if ((Mode & SK_STRIP_FCS_ON) != 0) {
+			RxCmd |= GM_RXCR_CRC_DIS;
+		}
+		else {
+			RxCmd &= ~GM_RXCR_CRC_DIS;
+		}
+		/* Write the new mode to the Rx control register if required */
+		if (OldRxCmd != RxCmd) {
+			GM_OUT16(IoC, Port, GM_RX_CTRL, RxCmd);
+		}
+	}
+
+	if ((Mode & (SK_BIG_PK_OK_ON | SK_BIG_PK_OK_OFF)) != 0) {
+		
+		GM_IN16(IoC, Port, GM_SERIAL_MODE, &OldRxCmd);
+
+		RxCmd = OldRxCmd;
+
+		if ((Mode & SK_BIG_PK_OK_ON) != 0) {
+			RxCmd |= GM_SMOD_JUMBO_ENA;
+		}
+		else {
+			RxCmd &= ~GM_SMOD_JUMBO_ENA;
+		}
+		/* Write the new mode to the Rx control register if required */
+		if (OldRxCmd != RxCmd) {
+			GM_OUT16(IoC, Port, GM_SERIAL_MODE, RxCmd);
+		}
+	}
+}	/* SkGmSetRxCmd */
+
+
+/******************************************************************************
+ *
+ *	SkMacSetRxCmd() - Modify the value of the MAC's Rx Control Register
+ *
+ * Description:	modifies the MAC's Rx Control reg. dep. on board type
+ *
+ * Returns:
+ *	nothing
+ */
+void SkMacSetRxCmd(
+SK_AC	*pAC,		/* adapter context */
+SK_IOC	IoC,		/* IO context */
+int		Port,		/* Port Index (MAC_1 + n) */
+int		Mode)		/* Rx Mode */
+{
+	if (pAC->GIni.GIGenesis) {
+		
+		SkXmSetRxCmd(pAC, IoC, Port, Mode);
+	}
+	else {
+		
+		SkGmSetRxCmd(pAC, IoC, Port, Mode);
+	}
+
+}	/* SkMacSetRxCmd */
+
+
+/******************************************************************************
+ *
+ *	SkMacCrcGener() - Enable / Disable CRC Generation
+ *
+ * Description:	enables / disables CRC generation dep. on board type
+ *
+ * Returns:
+ *	nothing
+ */
+void SkMacCrcGener(
+SK_AC	*pAC,	/* adapter context */
+SK_IOC	IoC,	/* IO context */
+int		Port,	/* Port Index (MAC_1 + n) */
+SK_BOOL	Enable)	/* Enable / Disable */
+{
+	SK_U16	Word;
+
+	if (pAC->GIni.GIGenesis) {
+		
+		XM_IN16(IoC, Port, XM_TX_CMD, &Word);
+
+		if (Enable) {
+			Word &= ~XM_TX_NO_CRC;
+		}
+		else {
+			Word |= XM_TX_NO_CRC;
+		}
+		/* setup Tx Command Register */
+		XM_OUT16(IoC, Port, XM_TX_CMD, Word);
+	}
+	else {
+		
+		GM_IN16(IoC, Port, GM_TX_CTRL, &Word);
+		
+		if (Enable) {
+			Word &= ~GM_TXCR_CRC_DIS;
+		}
+		else {
+			Word |= GM_TXCR_CRC_DIS;
+		}
+		/* setup Tx Control Register */
+		GM_OUT16(IoC, Port, GM_TX_CTRL, Word);
+	}
+
+}	/* SkMacCrcGener*/
+
+#endif /* SK_DIAG */
+
+
+#ifdef GENESIS
+/******************************************************************************
+ *
+ *	SkXmClrExactAddr() - Clear Exact Match Address Registers
+ *
+ * Description:
+ *	All Exact Match Address registers of the XMAC 'Port' will be
+ *	cleared starting with 'StartNum' up to (and including) the
+ *	Exact Match address number of 'StopNum'.
+ *
+ * Returns:
+ *	nothing
+ */
+void SkXmClrExactAddr(
+SK_AC	*pAC,		/* adapter context */
+SK_IOC	IoC,		/* IO context */
+int		Port,		/* Port Index (MAC_1 + n) */
+int		StartNum,	/* Begin with this Address Register Index (0..15) */
+int		StopNum)	/* Stop after finished with this Register Idx (0..15) */
+{
+	int		i;
+	SK_U16	ZeroAddr[3] = {0x0000, 0x0000, 0x0000};
+
+	if ((unsigned)StartNum > 15 || (unsigned)StopNum > 15 ||
+		StartNum > StopNum) {
+
+		SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E001, SKERR_HWI_E001MSG);
+		return;
+	}
+
+	for (i = StartNum; i <= StopNum; i++) {
+		XM_OUTADDR(IoC, Port, XM_EXM(i), &ZeroAddr[0]);
+	}
+}	/* SkXmClrExactAddr */
+#endif /* GENESIS */
+
+
+/******************************************************************************
+ *
+ *	SkMacFlushTxFifo() - Flush the MAC's transmit FIFO
+ *
+ * Description:
+ *	Flush the transmit FIFO of the MAC specified by the index 'Port'
+ *
+ * Returns:
+ *	nothing
+ */
+void SkMacFlushTxFifo(
+SK_AC	*pAC,	/* adapter context */
+SK_IOC	IoC,	/* IO context */
+int		Port)	/* Port Index (MAC_1 + n) */
+{
+#ifdef GENESIS
+	SK_U32	MdReg;
+
+	if (pAC->GIni.GIGenesis) {
+		
+		XM_IN32(IoC, Port, XM_MODE, &MdReg);
+
+		XM_OUT32(IoC, Port, XM_MODE, MdReg | XM_MD_FTF);
+	}
+#endif /* GENESIS */
+	
+#ifdef YUKON
+	if (pAC->GIni.GIYukon) {
+		/* no way to flush the FIFO we have to issue a reset */
+		/* TBD */
+	}
+#endif /* YUKON */
+
+}	/* SkMacFlushTxFifo */
+
+
+/******************************************************************************
+ *
+ *	SkMacFlushRxFifo() - Flush the MAC's receive FIFO
+ *
+ * Description:
+ *	Flush the receive FIFO of the MAC specified by the index 'Port'
+ *
+ * Returns:
+ *	nothing
+ */
+static void SkMacFlushRxFifo(
+SK_AC	*pAC,	/* adapter context */
+SK_IOC	IoC,	/* IO context */
+int		Port)	/* Port Index (MAC_1 + n) */
+{
+#ifdef GENESIS
+	SK_U32	MdReg;
+
+	if (pAC->GIni.GIGenesis) {
+
+		XM_IN32(IoC, Port, XM_MODE, &MdReg);
+
+		XM_OUT32(IoC, Port, XM_MODE, MdReg | XM_MD_FRF);
+	}
+#endif /* GENESIS */
+	
+#ifdef YUKON
+	if (pAC->GIni.GIYukon) {
+		/* no way to flush the FIFO we have to issue a reset */
+		/* TBD */
+	}
+#endif /* YUKON */
+
+}	/* SkMacFlushRxFifo */
+
+
+#ifdef GENESIS
+/******************************************************************************
+ *
+ *	SkXmSoftRst() - Do a XMAC software reset
+ *
+ * Description:
+ *	The PHY registers should not be destroyed during this
+ *	kind of software reset. Therefore the XMAC Software Reset
+ *	(XM_GP_RES_MAC bit in XM_GP_PORT) must not be used!
+ *
+ *	The software reset is done by
+ *		- disabling the Rx and Tx state machine,
+ *		- resetting the statistics module,
+ *		- clear all other significant XMAC Mode,
+ *		  Command, and Control Registers
+ *		- clearing the Hash Register and the
+ *		  Exact Match Address registers, and
+ *		- flushing the XMAC's Rx and Tx FIFOs.
+ *
+ * Note:
+ *	Another requirement when stopping the XMAC is to
+ *	avoid sending corrupted frames on the network.
+ *	Disabling the Tx state machine will NOT interrupt
+ *	the currently transmitted frame. But we must take care
+ *	that the Tx FIFO is cleared AFTER the current frame
+ *	is complete sent to the network.
+ *
+ *	It takes about 12ns to send a frame with 1538 bytes.
+ *	One PCI clock goes at least 15ns (66MHz). Therefore
+ *	after reading XM_GP_PORT back, we are sure that the
+ *	transmitter is disabled AND idle. And this means
+ *	we may flush the transmit FIFO now.
+ *
+ * Returns:
+ *	nothing
+ */
+static void SkXmSoftRst(
+SK_AC	*pAC,	/* adapter context */
+SK_IOC	IoC,	/* IO context */
+int		Port)	/* Port Index (MAC_1 + n) */
+{
+	SK_U16	ZeroAddr[4] = {0x0000, 0x0000, 0x0000, 0x0000};
+	
+	/* reset the statistics module */
+	XM_OUT32(IoC, Port, XM_GP_PORT, XM_GP_RES_STAT);
+
+	/* disable all XMAC IRQs */
+	XM_OUT16(IoC, Port, XM_IMSK, 0xffff);
+	
+	XM_OUT32(IoC, Port, XM_MODE, 0);		/* clear Mode Reg */
+	
+	XM_OUT16(IoC, Port, XM_TX_CMD, 0);		/* reset TX CMD Reg */
+	XM_OUT16(IoC, Port, XM_RX_CMD, 0);		/* reset RX CMD Reg */
+	
+	/* disable all PHY IRQs */
+	switch (pAC->GIni.GP[Port].PhyType) {
+	case SK_PHY_BCOM:
+			SkXmPhyWrite(pAC, IoC, Port, PHY_BCOM_INT_MASK, 0xffff);
+			break;
+#ifdef OTHER_PHY
+		case SK_PHY_LONE:
+			SkXmPhyWrite(pAC, IoC, Port, PHY_LONE_INT_ENAB, 0);
+			break;
+		case SK_PHY_NAT:
+			/* todo: National
+			 SkXmPhyWrite(pAC, IoC, Port, PHY_NAT_INT_MASK, 0xffff); */
+			break;
+#endif /* OTHER_PHY */
+	}
+
+	/* clear the Hash Register */
+	XM_OUTHASH(IoC, Port, XM_HSM, &ZeroAddr);
+
+	/* clear the Exact Match Address registers */
+	SkXmClrExactAddr(pAC, IoC, Port, 0, 15);
+	
+	/* clear the Source Check Address registers */
+	XM_OUTHASH(IoC, Port, XM_SRC_CHK, &ZeroAddr);
+
+}	/* SkXmSoftRst */
+
+
+/******************************************************************************
+ *
+ *	SkXmHardRst() - Do a XMAC hardware reset
+ *
+ * Description:
+ *	The XMAC of the specified 'Port' and all connected devices
+ *	(PHY and SERDES) will receive a reset signal on its *Reset pins.
+ *	External PHYs must be reset by clearing a bit in the GPIO register
+ *  (Timing requirements: Broadcom: 400ns, Level One: none, National: 80ns).
+ *
+ * ATTENTION:
+ * 	It is absolutely necessary to reset the SW_RST Bit first
+ *	before calling this function.
+ *
+ * Returns:
+ *	nothing
+ */
+static void SkXmHardRst(
+SK_AC	*pAC,	/* adapter context */
+SK_IOC	IoC,	/* IO context */
+int		Port)	/* Port Index (MAC_1 + n) */
+{
+	SK_U32	Reg;
+	int		i;
+	int		TOut;
+	SK_U16	Word;
+
+	for (i = 0; i < 4; i++) {
+		/* TX_MFF_CTRL1 has 32 bits, but only the lowest 16 bits are used */
+		SK_OUT16(IoC, MR_ADDR(Port, TX_MFF_CTRL1), MFF_CLR_MAC_RST);
+
+		TOut = 0;
+		do {
+			if (TOut++ > 10000) {
+				/*
+				 * Adapter seems to be in RESET state.
+				 * Registers cannot be written.
+				 */
+				return;
+			}
+
+			SK_OUT16(IoC, MR_ADDR(Port, TX_MFF_CTRL1), MFF_SET_MAC_RST);
+			
+			SK_IN16(IoC, MR_ADDR(Port, TX_MFF_CTRL1), &Word);
+		
+		} while ((Word & MFF_SET_MAC_RST) == 0);
+	}
+
+	/* For external PHYs there must be special handling */
+	if (pAC->GIni.GP[Port].PhyType != SK_PHY_XMAC) {
+		
+		SK_IN32(IoC, B2_GP_IO, &Reg);
+		
+		if (Port == 0) {
+			Reg |= GP_DIR_0; 	/* set to output */
+			Reg &= ~GP_IO_0;	/* set PHY reset (active low) */
+		}
+		else {
+			Reg |= GP_DIR_2;	/* set to output */
+			Reg &= ~GP_IO_2;	/* set PHY reset (active low) */
+		}
+		/* reset external PHY */
+		SK_OUT32(IoC, B2_GP_IO, Reg);
+
+		/* short delay */
+		SK_IN32(IoC, B2_GP_IO, &Reg);
+	}
+}	/* SkXmHardRst */
+
+
+/******************************************************************************
+ *
+ *	SkXmClearRst() - Release the PHY & XMAC reset
+ *
+ * Description:
+ *
+ * Returns:
+ *	nothing
+ */
+static void SkXmClearRst(
+SK_AC	*pAC,	/* adapter context */
+SK_IOC	IoC,	/* IO context */
+int		Port)	/* Port Index (MAC_1 + n) */
+{
+	SK_U32	DWord;
+	
+	/* clear HW reset */
+	SK_OUT16(IoC, MR_ADDR(Port, TX_MFF_CTRL1), MFF_CLR_MAC_RST);
+
+	if (pAC->GIni.GP[Port].PhyType != SK_PHY_XMAC) {
+
+		SK_IN32(IoC, B2_GP_IO, &DWord);
+
+		if (Port == 0) {
+			DWord |= (GP_DIR_0 | GP_IO_0); /* set to output */
+		}
+		else {
+			DWord |= (GP_DIR_2 | GP_IO_2); /* set to output */
+		}
+		/* Clear PHY reset */
+		SK_OUT32(IoC, B2_GP_IO, DWord);
+
+		/* Enable GMII interface */
+		XM_OUT16(IoC, Port, XM_HW_CFG, XM_HW_GMII_MD);
+	}
+}	/* SkXmClearRst */
+#endif /* GENESIS */
+
+
+#ifdef YUKON
+/******************************************************************************
+ *
+ *	SkGmSoftRst() - Do a GMAC software reset
+ *
+ * Description:
+ *	The GPHY registers should not be destroyed during this
+ *	kind of software reset.
+ *
+ * Returns:
+ *	nothing
+ */
+static void SkGmSoftRst(
+SK_AC	*pAC,	/* adapter context */
+SK_IOC	IoC,	/* IO context */
+int		Port)	/* Port Index (MAC_1 + n) */
+{
+	SK_U16	EmptyHash[4] = {0x0000, 0x0000, 0x0000, 0x0000};
+	SK_U16  RxCtrl;
+
+	/* reset the statistics module */
+
+	/* disable all GMAC IRQs */
+	SK_OUT8(IoC, GMAC_IRQ_MSK, 0);
+	
+	/* disable all PHY IRQs */
+	SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_INT_MASK, 0);
+	
+	/* clear the Hash Register */
+	GM_OUTHASH(IoC, Port, GM_MC_ADDR_H1, EmptyHash);
+
+	/* Enable Unicast and Multicast filtering */
+	GM_IN16(IoC, Port, GM_RX_CTRL, &RxCtrl);
+	
+	GM_OUT16(IoC, Port, GM_RX_CTRL,
+		(SK_U16)(RxCtrl | GM_RXCR_UCF_ENA | GM_RXCR_MCF_ENA));
+
+}	/* SkGmSoftRst */
+
+
+/******************************************************************************
+ *
+ *	SkGmHardRst() - Do a GMAC hardware reset
+ *
+ * Description:
+ *
+ * Returns:
+ *	nothing
+ */
+static void SkGmHardRst(
+SK_AC	*pAC,	/* adapter context */
+SK_IOC	IoC,	/* IO context */
+int		Port)	/* Port Index (MAC_1 + n) */
+{
+	SK_U32	DWord;
+	
+	/* WA code for COMA mode */
+	if (pAC->GIni.GIYukonLite &&
+		pAC->GIni.GIChipRev >= CHIP_REV_YU_LITE_A3) {
+		
+		SK_IN32(IoC, B2_GP_IO, &DWord);
+
+		DWord |= (GP_DIR_9 | GP_IO_9);
+
+		/* set PHY reset */
+		SK_OUT32(IoC, B2_GP_IO, DWord);
+	}
+
+	/* set GPHY Control reset */
+	SK_OUT32(IoC, MR_ADDR(Port, GPHY_CTRL), GPC_RST_SET);
+
+	/* set GMAC Control reset */
+	SK_OUT32(IoC, MR_ADDR(Port, GMAC_CTRL), GMC_RST_SET);
+
+}	/* SkGmHardRst */
+
+
+/******************************************************************************
+ *
+ *	SkGmClearRst() - Release the GPHY & GMAC reset
+ *
+ * Description:
+ *
+ * Returns:
+ *	nothing
+ */
+static void SkGmClearRst(
+SK_AC	*pAC,	/* adapter context */
+SK_IOC	IoC,	/* IO context */
+int		Port)	/* Port Index (MAC_1 + n) */
+{
+	SK_U32	DWord;
+	
+#ifdef XXX
+		/* clear GMAC Control reset */
+		SK_OUT32(IoC, MR_ADDR(Port, GMAC_CTRL), GMC_RST_CLR);
+
+		/* set GMAC Control reset */
+		SK_OUT32(IoC, MR_ADDR(Port, GMAC_CTRL), GMC_RST_SET);
+#endif /* XXX */
+
+	/* WA code for COMA mode */
+	if (pAC->GIni.GIYukonLite &&
+		pAC->GIni.GIChipRev >= CHIP_REV_YU_LITE_A3) {
+		
+		SK_IN32(IoC, B2_GP_IO, &DWord);
+
+		DWord |= GP_DIR_9;		/* set to output */
+		DWord &= ~GP_IO_9;		/* clear PHY reset (active high) */
+
+		/* clear PHY reset */
+		SK_OUT32(IoC, B2_GP_IO, DWord);
+	}
+
+	/* set HWCFG_MODE */
+	DWord = GPC_INT_POL_HI | GPC_DIS_FC | GPC_DIS_SLEEP |
+		GPC_ENA_XC | GPC_ANEG_ADV_ALL_M | GPC_ENA_PAUSE |
+		(pAC->GIni.GICopperType ? GPC_HWCFG_GMII_COP :
+		GPC_HWCFG_GMII_FIB);
+
+	/* set GPHY Control reset */
+	SK_OUT32(IoC, MR_ADDR(Port, GPHY_CTRL), DWord | GPC_RST_SET);
+
+	/* release GPHY Control reset */
+	SK_OUT32(IoC, MR_ADDR(Port, GPHY_CTRL), DWord | GPC_RST_CLR);
+
+#ifdef VCPU
+	VCpuWait(9000);
+#endif /* VCPU */
+
+	/* clear GMAC Control reset */
+	SK_OUT32(IoC, MR_ADDR(Port, GMAC_CTRL), GMC_PAUSE_ON | GMC_RST_CLR);
+
+#ifdef VCPU
+	VCpuWait(2000);
+	
+	SK_IN32(IoC, MR_ADDR(Port, GPHY_CTRL), &DWord);
+			
+	SK_IN32(IoC, B0_ISRC, &DWord);
+#endif /* VCPU */
+
+}	/* SkGmClearRst */
+#endif /* YUKON */
+
+
+/******************************************************************************
+ *
+ *	SkMacSoftRst() - Do a MAC software reset
+ *
+ * Description:	calls a MAC software reset routine dep. on board type
+ *
+ * Returns:
+ *	nothing
+ */
+void SkMacSoftRst(
+SK_AC	*pAC,	/* adapter context */
+SK_IOC	IoC,	/* IO context */
+int		Port)	/* Port Index (MAC_1 + n) */
+{
+	SK_GEPORT	*pPrt;
+
+	pPrt = &pAC->GIni.GP[Port];
+
+	/* disable receiver and transmitter */
+	SkMacRxTxDisable(pAC, IoC, Port);
+
+#ifdef GENESIS
+	if (pAC->GIni.GIGenesis) {
+		
+		SkXmSoftRst(pAC, IoC, Port);
+	}
+#endif /* GENESIS */
+	
+#ifdef YUKON
+	if (pAC->GIni.GIYukon) {
+		
+		SkGmSoftRst(pAC, IoC, Port);
+	}
+#endif /* YUKON */
+
+	/* flush the MAC's Rx and Tx FIFOs */
+	SkMacFlushTxFifo(pAC, IoC, Port);
+	
+	SkMacFlushRxFifo(pAC, IoC, Port);
+
+	pPrt->PState = SK_PRT_STOP;
+
+}	/* SkMacSoftRst */
+
+
+/******************************************************************************
+ *
+ *	SkMacHardRst() - Do a MAC hardware reset
+ *
+ * Description:	calls a MAC hardware reset routine dep. on board type
+ *
+ * Returns:
+ *	nothing
+ */
+void SkMacHardRst(
+SK_AC	*pAC,	/* adapter context */
+SK_IOC	IoC,	/* IO context */
+int		Port)	/* Port Index (MAC_1 + n) */
+{
+	
+#ifdef GENESIS
+	if (pAC->GIni.GIGenesis) {
+		
+		SkXmHardRst(pAC, IoC, Port);
+	}
+#endif /* GENESIS */
+	
+#ifdef YUKON
+	if (pAC->GIni.GIYukon) {
+		
+		SkGmHardRst(pAC, IoC, Port);
+	}
+#endif /* YUKON */
+
+	pAC->GIni.GP[Port].PState = SK_PRT_RESET;
+
+}	/* SkMacHardRst */
+
+
+#ifdef GENESIS
+/******************************************************************************
+ *
+ *	SkXmInitMac() - Initialize the XMAC II
+ *
+ * Description:
+ *	Initialize the XMAC of the specified port.
+ *	The XMAC must be reset or stopped before calling this function.
+ *
+ * Note:
+ *	The XMAC's Rx and Tx state machine is still disabled when returning.
+ *
+ * Returns:
+ *	nothing
+ */
+void SkXmInitMac(
+SK_AC	*pAC,		/* adapter context */
+SK_IOC	IoC,		/* IO context */
+int		Port)		/* Port Index (MAC_1 + n) */
+{
+	SK_GEPORT	*pPrt;
+	int			i;
+	SK_U16		SWord;
+
+	pPrt = &pAC->GIni.GP[Port];
+
+	if (pPrt->PState == SK_PRT_STOP) {
+		/* Port State: SK_PRT_STOP */
+		/* Verify that the reset bit is cleared */
+		SK_IN16(IoC, MR_ADDR(Port, TX_MFF_CTRL1), &SWord);
+
+		if ((SWord & MFF_SET_MAC_RST) != 0) {
+			/* PState does not match HW state */
+			SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E006, SKERR_HWI_E006MSG);
+			/* Correct it */
+			pPrt->PState = SK_PRT_RESET;
+		}
+	}
+
+	if (pPrt->PState == SK_PRT_RESET) {
+
+		SkXmClearRst(pAC, IoC, Port);
+
+		if (pPrt->PhyType != SK_PHY_XMAC) {
+			/* read Id from external PHY (all have the same address) */
+			SkXmPhyRead(pAC, IoC, Port, PHY_XMAC_ID1, &pPrt->PhyId1);
+
+			/*
+			 * Optimize MDIO transfer by suppressing preamble.
+			 * Must be done AFTER first access to BCOM chip.
+			 */
+			XM_IN16(IoC, Port, XM_MMU_CMD, &SWord);
+			
+			XM_OUT16(IoC, Port, XM_MMU_CMD, SWord | XM_MMU_NO_PRE);
+
+			if (pPrt->PhyId1 == PHY_BCOM_ID1_C0) {
+				/*
+				 * Workaround BCOM Errata for the C0 type.
+				 * Write magic patterns to reserved registers.
+				 */
+				i = 0;
+				while (BcomRegC0Hack[i].PhyReg != 0) {
+					SkXmPhyWrite(pAC, IoC, Port, BcomRegC0Hack[i].PhyReg,
+						BcomRegC0Hack[i].PhyVal);
+					i++;
+				}
+			}
+			else if (pPrt->PhyId1 == PHY_BCOM_ID1_A1) {
+				/*
+				 * Workaround BCOM Errata for the A1 type.
+				 * Write magic patterns to reserved registers.
+				 */
+				i = 0;
+				while (BcomRegA1Hack[i].PhyReg != 0) {
+					SkXmPhyWrite(pAC, IoC, Port, BcomRegA1Hack[i].PhyReg,
+						BcomRegA1Hack[i].PhyVal);
+					i++;
+				}
+			}
+
+			/*
+			 * Workaround BCOM Errata (#10523) for all BCom PHYs.
+			 * Disable Power Management after reset.
+			 */
+			SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUX_CTRL, &SWord);
+			
+			SkXmPhyWrite(pAC, IoC, Port, PHY_BCOM_AUX_CTRL,
+				(SK_U16)(SWord | PHY_B_AC_DIS_PM));
+
+			/* PHY LED initialization is done in SkGeXmitLED() */
+		}
+
+		/* Dummy read the Interrupt source register */
+		XM_IN16(IoC, Port, XM_ISRC, &SWord);
+		
+		/*
+		 * The auto-negotiation process starts immediately after
+		 * clearing the reset. The auto-negotiation process should be
+		 * started by the SIRQ, therefore stop it here immediately.
+		 */
+		SkMacInitPhy(pAC, IoC, Port, SK_FALSE);
+
+#ifdef TEST_ONLY
+		/* temp. code: enable signal detect */
+		/* WARNING: do not override GMII setting above */
+		XM_OUT16(IoC, Port, XM_HW_CFG, XM_HW_COM4SIG);
+#endif
+	}
+
+	/*
+	 * configure the XMACs Station Address
+	 * B2_MAC_2 = xx xx xx xx xx x1 is programmed to XMAC A
+	 * B2_MAC_3 = xx xx xx xx xx x2 is programmed to XMAC B
+	 */
+	for (i = 0; i < 3; i++) {
+		/*
+		 * The following 2 statements are together endianess
+		 * independent. Remember this when changing.
+		 */
+		SK_IN16(IoC, (B2_MAC_2 + Port * 8 + i * 2), &SWord);
+		
+		XM_OUT16(IoC, Port, (XM_SA + i * 2), SWord);
+	}
+
+	/* Tx Inter Packet Gap (XM_TX_IPG):	use default */
+	/* Tx High Water Mark (XM_TX_HI_WM):	use default */
+	/* Tx Low Water Mark (XM_TX_LO_WM):	use default */
+	/* Host Request Threshold (XM_HT_THR):	use default */
+	/* Rx Request Threshold (XM_RX_THR):	use default */
+	/* Rx Low Water Mark (XM_RX_LO_WM):	use default */
+
+	/* configure Rx High Water Mark (XM_RX_HI_WM) */
+	XM_OUT16(IoC, Port, XM_RX_HI_WM, SK_XM_RX_HI_WM);
+
+	/* Configure Tx Request Threshold */
+	SWord = SK_XM_THR_SL;				/* for single port */
+
+	if (pAC->GIni.GIMacsFound > 1) {
+		switch (pAC->GIni.GIPortUsage) {
+		case SK_RED_LINK:
+			SWord = SK_XM_THR_REDL;		/* redundant link */
+			break;
+		case SK_MUL_LINK:
+			SWord = SK_XM_THR_MULL;		/* load balancing */
+			break;
+		case SK_JUMBO_LINK:
+			SWord = SK_XM_THR_JUMBO;	/* jumbo frames */
+			break;
+		default:
+			SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E014, SKERR_HWI_E014MSG);
+			break;
+		}
+	}
+	XM_OUT16(IoC, Port, XM_TX_THR, SWord);
+
+	/* setup register defaults for the Tx Command Register */
+	XM_OUT16(IoC, Port, XM_TX_CMD, XM_TX_AUTO_PAD);
+
+	/* setup register defaults for the Rx Command Register */
+	SWord = XM_RX_STRIP_FCS | XM_RX_LENERR_OK;
+
+	if (pAC->GIni.GIPortUsage == SK_JUMBO_LINK) {
+		SWord |= XM_RX_BIG_PK_OK;
+	}
+
+	if (pPrt->PLinkMode == SK_LMODE_HALF) {
+		/*
+		 * If in manual half duplex mode the other side might be in
+		 * full duplex mode, so ignore if a carrier extension is not seen
+		 * on frames received
+		 */
+		SWord |= XM_RX_DIS_CEXT;
+	}
+	
+	XM_OUT16(IoC, Port, XM_RX_CMD, SWord);
+
+	/*
+	 * setup register defaults for the Mode Register
+	 *	- Don't strip error frames to avoid Store & Forward
+	 *	  on the Rx side.
+	 *	- Enable 'Check Station Address' bit
+	 *	- Enable 'Check Address Array' bit
+	 */
+	XM_OUT32(IoC, Port, XM_MODE, XM_DEF_MODE);
+
+	/*
+	 * Initialize the Receive Counter Event Mask (XM_RX_EV_MSK)
+	 *	- Enable all bits excepting 'Octets Rx OK Low CntOv'
+	 *	  and 'Octets Rx OK Hi Cnt Ov'.
+	 */
+	XM_OUT32(IoC, Port, XM_RX_EV_MSK, XMR_DEF_MSK);
+
+	/*
+	 * Initialize the Transmit Counter Event Mask (XM_TX_EV_MSK)
+	 *	- Enable all bits excepting 'Octets Tx OK Low CntOv'
+	 *	  and 'Octets Tx OK Hi Cnt Ov'.
+	 */
+	XM_OUT32(IoC, Port, XM_TX_EV_MSK, XMT_DEF_MSK);
+
+	/*
+	 * Do NOT init XMAC interrupt mask here.
+	 * All interrupts remain disable until link comes up!
+	 */
+
+	/*
+	 * Any additional configuration changes may be done now.
+	 * The last action is to enable the Rx and Tx state machine.
+	 * This should be done after the auto-negotiation process
+	 * has been completed successfully.
+	 */
+}	/* SkXmInitMac */
+#endif /* GENESIS */
+
+
+#ifdef YUKON
+/******************************************************************************
+ *
+ *	SkGmInitMac() - Initialize the GMAC
+ *
+ * Description:
+ *	Initialize the GMAC of the specified port.
+ *	The GMAC must be reset or stopped before calling this function.
+ *
+ * Note:
+ *	The GMAC's Rx and Tx state machine is still disabled when returning.
+ *
+ * Returns:
+ *	nothing
+ */
+void SkGmInitMac(
+SK_AC	*pAC,		/* adapter context */
+SK_IOC	IoC,		/* IO context */
+int		Port)		/* Port Index (MAC_1 + n) */
+{
+	SK_GEPORT	*pPrt;
+	int			i;
+	SK_U16		SWord;
+	SK_U32		DWord;
+
+	pPrt = &pAC->GIni.GP[Port];
+
+	if (pPrt->PState == SK_PRT_STOP) {
+		/* Port State: SK_PRT_STOP */
+		/* Verify that the reset bit is cleared */
+		SK_IN32(IoC, MR_ADDR(Port, GMAC_CTRL), &DWord);
+		
+		if ((DWord & GMC_RST_SET) != 0) {
+			/* PState does not match HW state */
+			SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E006, SKERR_HWI_E006MSG);
+			/* Correct it */
+			pPrt->PState = SK_PRT_RESET;
+		}
+	}
+
+	if (pPrt->PState == SK_PRT_RESET) {
+		
+		SkGmHardRst(pAC, IoC, Port);
+
+		SkGmClearRst(pAC, IoC, Port);
+		
+		/* Auto-negotiation ? */
+		if (pPrt->PLinkMode == SK_LMODE_HALF || pPrt->PLinkMode == SK_LMODE_FULL) {
+			/* Auto-negotiation disabled */
+
+			/* get General Purpose Control */
+			GM_IN16(IoC, Port, GM_GP_CTRL, &SWord);
+
+			/* disable auto-update for speed, duplex and flow-control */
+			SWord |= GM_GPCR_AU_ALL_DIS;
+			
+			/* setup General Purpose Control Register */
+			GM_OUT16(IoC, Port, GM_GP_CTRL, SWord);
+			
+			SWord = GM_GPCR_AU_ALL_DIS;
+		}
+		else {
+			SWord = 0;
+		}
+
+		/* speed settings */
+		switch (pPrt->PLinkSpeed) {
+		case SK_LSPEED_AUTO:
+		case SK_LSPEED_1000MBPS:
+			SWord |= GM_GPCR_SPEED_1000 | GM_GPCR_SPEED_100;
+			break;
+		case SK_LSPEED_100MBPS:
+			SWord |= GM_GPCR_SPEED_100;
+			break;
+		case SK_LSPEED_10MBPS:
+			break;
+		}
+
+		/* duplex settings */
+		if (pPrt->PLinkMode != SK_LMODE_HALF) {
+			/* set full duplex */
+			SWord |= GM_GPCR_DUP_FULL;
+		}
+
+		/* flow-control settings */
+		switch (pPrt->PFlowCtrlMode) {
+		case SK_FLOW_MODE_NONE:
+			/* set Pause Off */
+			SK_OUT32(IoC, MR_ADDR(Port, GMAC_CTRL), GMC_PAUSE_OFF);
+			/* disable Tx & Rx flow-control */
+			SWord |= GM_GPCR_FC_TX_DIS | GM_GPCR_FC_RX_DIS | GM_GPCR_AU_FCT_DIS;
+			break;
+		case SK_FLOW_MODE_LOC_SEND:
+			/* disable Rx flow-control */
+			SWord |= GM_GPCR_FC_RX_DIS | GM_GPCR_AU_FCT_DIS;
+			break;
+		case SK_FLOW_MODE_SYMMETRIC:
+		case SK_FLOW_MODE_SYM_OR_REM:
+			/* enable Tx & Rx flow-control */
+			break;
+		}
+
+		/* setup General Purpose Control Register */
+		GM_OUT16(IoC, Port, GM_GP_CTRL, SWord);
+
+		/* dummy read the Interrupt Source Register */
+		SK_IN16(IoC, GMAC_IRQ_SRC, &SWord);
+		
+#ifndef VCPU
+		/* read Id from PHY */
+		SkGmPhyRead(pAC, IoC, Port, PHY_MARV_ID1, &pPrt->PhyId1);
+		
+		SkGmInitPhyMarv(pAC, IoC, Port, SK_FALSE);
+#endif /* VCPU */
+	}
+
+	(void)SkGmResetCounter(pAC, IoC, Port);
+
+	/* setup Transmit Control Register */
+	GM_OUT16(IoC, Port, GM_TX_CTRL, TX_COL_THR(pPrt->PMacColThres));
+
+	/* setup Receive Control Register */
+	GM_OUT16(IoC, Port, GM_RX_CTRL, GM_RXCR_UCF_ENA | GM_RXCR_MCF_ENA |
+		GM_RXCR_CRC_DIS);
+
+	/* setup Transmit Flow Control Register */
+	GM_OUT16(IoC, Port, GM_TX_FLOW_CTRL, 0xffff);
+
+	/* setup Transmit Parameter Register */
+#ifdef VCPU
+	GM_IN16(IoC, Port, GM_TX_PARAM, &SWord);
+#endif /* VCPU */
+
+    SWord = TX_JAM_LEN_VAL(pPrt->PMacJamLen) |
+			TX_JAM_IPG_VAL(pPrt->PMacJamIpgVal) |
+			TX_IPG_JAM_DATA(pPrt->PMacJamIpgData);
+	
+	GM_OUT16(IoC, Port, GM_TX_PARAM, SWord);
+
+	/* configure the Serial Mode Register */
+#ifdef VCPU
+	GM_IN16(IoC, Port, GM_SERIAL_MODE, &SWord);
+#endif /* VCPU */
+	
+	SWord = GM_SMOD_VLAN_ENA | IPG_DATA_VAL(pPrt->PMacIpgData);
+
+	if (pPrt->PMacLimit4) {
+		/* reset of collision counter after 4 consecutive collisions */
+		SWord |= GM_SMOD_LIMIT_4;
+	}
+
+	if (pAC->GIni.GIPortUsage == SK_JUMBO_LINK) {
+		/* enable jumbo mode (Max. Frame Length = 9018) */
+		SWord |= GM_SMOD_JUMBO_ENA;
+	}
+	
+	GM_OUT16(IoC, Port, GM_SERIAL_MODE, SWord);
+	
+	/*
+	 * configure the GMACs Station Addresses
+	 * in PROM you can find our addresses at:
+	 * B2_MAC_1 = xx xx xx xx xx x0 virtual address
+	 * B2_MAC_2 = xx xx xx xx xx x1 is programmed to GMAC A
+	 * B2_MAC_3 = xx xx xx xx xx x2 is reserved for DualPort
+	 */
+
+	for (i = 0; i < 3; i++) {
+		/*
+		 * The following 2 statements are together endianess
+		 * independent. Remember this when changing.
+		 */
+		/* physical address: will be used for pause frames */
+		SK_IN16(IoC, (B2_MAC_2 + Port * 8 + i * 2), &SWord);
+
+#ifdef WA_DEV_16
+		/* WA for deviation #16 */
+		if (pAC->GIni.GIChipId == CHIP_ID_YUKON && pAC->GIni.GIChipRev == 0) {
+			/* swap the address bytes */
+			SWord = ((SWord & 0xff00) >> 8)	| ((SWord & 0x00ff) << 8);
+
+			/* write to register in reversed order */
+			GM_OUT16(IoC, Port, (GM_SRC_ADDR_1L + (2 - i) * 4), SWord);
+		}
+		else {
+			GM_OUT16(IoC, Port, (GM_SRC_ADDR_1L + i * 4), SWord);
+		}
+#else		
+		GM_OUT16(IoC, Port, (GM_SRC_ADDR_1L + i * 4), SWord);
+#endif /* WA_DEV_16 */
+		
+		/* virtual address: will be used for data */
+		SK_IN16(IoC, (B2_MAC_1 + Port * 8 + i * 2), &SWord);
+
+		GM_OUT16(IoC, Port, (GM_SRC_ADDR_2L + i * 4), SWord);
+		
+		/* reset Multicast filtering Hash registers 1-3 */
+		GM_OUT16(IoC, Port, GM_MC_ADDR_H1 + 4*i, 0);
+	}
+
+	/* reset Multicast filtering Hash register 4 */
+	GM_OUT16(IoC, Port, GM_MC_ADDR_H4, 0);
+
+	/* enable interrupt mask for counter overflows */
+	GM_OUT16(IoC, Port, GM_TX_IRQ_MSK, 0);
+	GM_OUT16(IoC, Port, GM_RX_IRQ_MSK, 0);
+	GM_OUT16(IoC, Port, GM_TR_IRQ_MSK, 0);
+
+#if defined(SK_DIAG) || defined(DEBUG)
+	/* read General Purpose Status */
+	GM_IN16(IoC, Port, GM_GP_STAT, &SWord);
+	
+	SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+		("MAC Stat Reg.=0x%04X\n", SWord));
+#endif /* SK_DIAG || DEBUG */
+
+#ifdef SK_DIAG
+	c_print("MAC Stat Reg=0x%04X\n", SWord);
+#endif /* SK_DIAG */
+
+}	/* SkGmInitMac */
+#endif /* YUKON */
+
+
+#ifdef GENESIS
+/******************************************************************************
+ *
+ *	SkXmInitDupMd() - Initialize the XMACs Duplex Mode
+ *
+ * Description:
+ *	This function initializes the XMACs Duplex Mode.
+ *	It should be called after successfully finishing
+ *	the Auto-negotiation Process
+ *
+ * Returns:
+ *	nothing
+ */
+static void SkXmInitDupMd(
+SK_AC	*pAC,		/* adapter context */
+SK_IOC	IoC,		/* IO context */
+int		Port)		/* Port Index (MAC_1 + n) */
+{
+	switch (pAC->GIni.GP[Port].PLinkModeStatus) {
+	case SK_LMODE_STAT_AUTOHALF:
+	case SK_LMODE_STAT_HALF:
+		/* Configuration Actions for Half Duplex Mode */
+		/*
+		 * XM_BURST = default value. We are probable not quick
+		 * 	enough at the 'XMAC' bus to burst 8kB.
+		 *	The XMAC stops bursting if no transmit frames
+		 *	are available or the burst limit is exceeded.
+		 */
+		/* XM_TX_RT_LIM = default value (15) */
+		/* XM_TX_STIME = default value (0xff = 4096 bit times) */
+		break;
+	case SK_LMODE_STAT_AUTOFULL:
+	case SK_LMODE_STAT_FULL:
+		/* Configuration Actions for Full Duplex Mode */
+		/*
+		 * The duplex mode is configured by the PHY,
+		 * therefore it seems to be that there is nothing
+		 * to do here.
+		 */
+		break;
+	case SK_LMODE_STAT_UNKNOWN:
+	default:
+		SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E007, SKERR_HWI_E007MSG);
+		break;
+	}
+}	/* SkXmInitDupMd */
+
+
+/******************************************************************************
+ *
+ *	SkXmInitPauseMd() - initialize the Pause Mode to be used for this port
+ *
+ * Description:
+ *	This function initializes the Pause Mode which should
+ *	be used for this port.
+ *	It should be called after successfully finishing
+ *	the Auto-negotiation Process
+ *
+ * Returns:
+ *	nothing
+ */
+static void SkXmInitPauseMd(
+SK_AC	*pAC,		/* adapter context */
+SK_IOC	IoC,		/* IO context */
+int		Port)		/* Port Index (MAC_1 + n) */
+{
+	SK_GEPORT	*pPrt;
+	SK_U32		DWord;
+	SK_U16		Word;
+
+	pPrt = &pAC->GIni.GP[Port];
+
+	XM_IN16(IoC, Port, XM_MMU_CMD, &Word);
+	
+	if (pPrt->PFlowCtrlStatus == SK_FLOW_STAT_NONE ||
+		pPrt->PFlowCtrlStatus == SK_FLOW_STAT_LOC_SEND) {
+
+		/* Disable Pause Frame Reception */
+		Word |= XM_MMU_IGN_PF;
+	}
+	else {
+		/*
+		 * enabling pause frame reception is required for 1000BT
+		 * because the XMAC is not reset if the link is going down
+		 */
+		/* Enable Pause Frame Reception */
+		Word &= ~XM_MMU_IGN_PF;
+	}	
+	
+	XM_OUT16(IoC, Port, XM_MMU_CMD, Word);
+
+	XM_IN32(IoC, Port, XM_MODE, &DWord);
+
+	if (pPrt->PFlowCtrlStatus == SK_FLOW_STAT_SYMMETRIC ||
+		pPrt->PFlowCtrlStatus == SK_FLOW_STAT_LOC_SEND) {
+
+		/*
+		 * Configure Pause Frame Generation
+		 * Use internal and external Pause Frame Generation.
+		 * Sending pause frames is edge triggered.
+		 * Send a Pause frame with the maximum pause time if
+		 * internal oder external FIFO full condition occurs.
+		 * Send a zero pause time frame to re-start transmission.
+		 */
+
+		/* XM_PAUSE_DA = '010000C28001' (default) */
+
+		/* XM_MAC_PTIME = 0xffff (maximum) */
+		/* remember this value is defined in big endian (!) */
+		XM_OUT16(IoC, Port, XM_MAC_PTIME, 0xffff);
+
+		/* Set Pause Mode in Mode Register */
+		DWord |= XM_PAUSE_MODE;
+
+		/* Set Pause Mode in MAC Rx FIFO */
+		SK_OUT16(IoC, MR_ADDR(Port, RX_MFF_CTRL1), MFF_ENA_PAUSE);
+	}
+	else {
+		/*
+		 * disable pause frame generation is required for 1000BT
+		 * because the XMAC is not reset if the link is going down
+		 */
+		/* Disable Pause Mode in Mode Register */
+		DWord &= ~XM_PAUSE_MODE;
+
+		/* Disable Pause Mode in MAC Rx FIFO */
+		SK_OUT16(IoC, MR_ADDR(Port, RX_MFF_CTRL1), MFF_DIS_PAUSE);
+	}
+	
+	XM_OUT32(IoC, Port, XM_MODE, DWord);
+}	/* SkXmInitPauseMd*/
+
+
+/******************************************************************************
+ *
+ *	SkXmInitPhyXmac() - Initialize the XMAC Phy registers
+ *
+ * Description:	initializes all the XMACs Phy registers
+ *
+ * Note:
+ *
+ * Returns:
+ *	nothing
+ */
+static void SkXmInitPhyXmac(
+SK_AC	*pAC,		/* adapter context */
+SK_IOC	IoC,		/* IO context */
+int		Port,		/* Port Index (MAC_1 + n) */
+SK_BOOL	DoLoop)		/* Should a Phy LoopBack be set-up? */
+{
+	SK_GEPORT	*pPrt;
+	SK_U16		Ctrl;
+
+	pPrt = &pAC->GIni.GP[Port];
+	Ctrl = 0;
+	
+	/* Auto-negotiation ? */
+	if (pPrt->PLinkMode == SK_LMODE_HALF || pPrt->PLinkMode == SK_LMODE_FULL) {
+		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+			("InitPhyXmac: no auto-negotiation Port %d\n", Port));
+		/* Set DuplexMode in Config register */
+		if (pPrt->PLinkMode == SK_LMODE_FULL) {
+			Ctrl |= PHY_CT_DUP_MD;
+		}
+
+		/*
+		 * Do NOT enable Auto-negotiation here. This would hold
+		 * the link down because no IDLEs are transmitted
+		 */
+	}
+	else {
+		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+			("InitPhyXmac: with auto-negotiation Port %d\n", Port));
+		/* Set Auto-negotiation advertisement */
+
+		/* Set Full/half duplex capabilities */
+		switch (pPrt->PLinkMode) {
+		case SK_LMODE_AUTOHALF:
+			Ctrl |= PHY_X_AN_HD;
+			break;
+		case SK_LMODE_AUTOFULL:
+			Ctrl |= PHY_X_AN_FD;
+			break;
+		case SK_LMODE_AUTOBOTH:
+			Ctrl |= PHY_X_AN_FD | PHY_X_AN_HD;
+			break;
+		default:
+			SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_HWI_E015,
+				SKERR_HWI_E015MSG);
+		}
+
+		/* Set Flow-control capabilities */
+		switch (pPrt->PFlowCtrlMode) {
+		case SK_FLOW_MODE_NONE:
+			Ctrl |= PHY_X_P_NO_PAUSE;
+			break;
+		case SK_FLOW_MODE_LOC_SEND:
+			Ctrl |= PHY_X_P_ASYM_MD;
+			break;
+		case SK_FLOW_MODE_SYMMETRIC:
+			Ctrl |= PHY_X_P_SYM_MD;
+			break;
+		case SK_FLOW_MODE_SYM_OR_REM:
+			Ctrl |= PHY_X_P_BOTH_MD;
+			break;
+		default:
+			SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_HWI_E016,
+				SKERR_HWI_E016MSG);
+		}
+
+		/* Write AutoNeg Advertisement Register */
+		SkXmPhyWrite(pAC, IoC, Port, PHY_XMAC_AUNE_ADV, Ctrl);
+
+		/* Restart Auto-negotiation */
+		Ctrl = PHY_CT_ANE | PHY_CT_RE_CFG;
+	}
+
+	if (DoLoop) {
+		/* Set the Phy Loopback bit, too */
+		Ctrl |= PHY_CT_LOOP;
+	}
+
+	/* Write to the Phy control register */
+	SkXmPhyWrite(pAC, IoC, Port, PHY_XMAC_CTRL, Ctrl);
+}	/* SkXmInitPhyXmac */
+
+
+/******************************************************************************
+ *
+ *	SkXmInitPhyBcom() - Initialize the Broadcom Phy registers
+ *
+ * Description:	initializes all the Broadcom Phy registers
+ *
+ * Note:
+ *
+ * Returns:
+ *	nothing
+ */
+static void SkXmInitPhyBcom(
+SK_AC	*pAC,		/* adapter context */
+SK_IOC	IoC,		/* IO context */
+int		Port,		/* Port Index (MAC_1 + n) */
+SK_BOOL	DoLoop)		/* Should a Phy LoopBack be set-up? */
+{
+	SK_GEPORT	*pPrt;
+	SK_U16		Ctrl1;
+	SK_U16		Ctrl2;
+	SK_U16		Ctrl3;
+	SK_U16		Ctrl4;
+	SK_U16		Ctrl5;
+
+	Ctrl1 = PHY_CT_SP1000;
+	Ctrl2 = 0;
+	Ctrl3 = PHY_SEL_TYPE;
+	Ctrl4 = PHY_B_PEC_EN_LTR;
+	Ctrl5 = PHY_B_AC_TX_TST;
+
+	pPrt = &pAC->GIni.GP[Port];
+
+	/* manually Master/Slave ? */
+	if (pPrt->PMSMode != SK_MS_MODE_AUTO) {
+		Ctrl2 |= PHY_B_1000C_MSE;
+		
+		if (pPrt->PMSMode == SK_MS_MODE_MASTER) {
+			Ctrl2 |= PHY_B_1000C_MSC;
+		}
+	}
+	/* Auto-negotiation ? */
+	if (pPrt->PLinkMode == SK_LMODE_HALF || pPrt->PLinkMode == SK_LMODE_FULL) {
+		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+			("InitPhyBcom: no auto-negotiation Port %d\n", Port));
+		/* Set DuplexMode in Config register */
+		if (pPrt->PLinkMode == SK_LMODE_FULL) {
+			Ctrl1 |= PHY_CT_DUP_MD;
+		}
+
+		/* Determine Master/Slave manually if not already done */
+		if (pPrt->PMSMode == SK_MS_MODE_AUTO) {
+			Ctrl2 |= PHY_B_1000C_MSE;	/* set it to Slave */
+		}
+
+		/*
+		 * Do NOT enable Auto-negotiation here. This would hold
+		 * the link down because no IDLES are transmitted
+		 */
+	}
+	else {
+		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+			("InitPhyBcom: with auto-negotiation Port %d\n", Port));
+		/* Set Auto-negotiation advertisement */
+
+		/*
+		 * Workaround BCOM Errata #1 for the C5 type.
+		 * 1000Base-T Link Acquisition Failure in Slave Mode
+		 * Set Repeater/DTE bit 10 of the 1000Base-T Control Register
+		 */
+		Ctrl2 |= PHY_B_1000C_RD;
+		
+		 /* Set Full/half duplex capabilities */
+		switch (pPrt->PLinkMode) {
+		case SK_LMODE_AUTOHALF:
+			Ctrl2 |= PHY_B_1000C_AHD;
+			break;
+		case SK_LMODE_AUTOFULL:
+			Ctrl2 |= PHY_B_1000C_AFD;
+			break;
+		case SK_LMODE_AUTOBOTH:
+			Ctrl2 |= PHY_B_1000C_AFD | PHY_B_1000C_AHD;
+			break;
+		default:
+			SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_HWI_E015,
+				SKERR_HWI_E015MSG);
+		}
+
+		/* Set Flow-control capabilities */
+		switch (pPrt->PFlowCtrlMode) {
+		case SK_FLOW_MODE_NONE:
+			Ctrl3 |= PHY_B_P_NO_PAUSE;
+			break;
+		case SK_FLOW_MODE_LOC_SEND:
+			Ctrl3 |= PHY_B_P_ASYM_MD;
+			break;
+		case SK_FLOW_MODE_SYMMETRIC:
+			Ctrl3 |= PHY_B_P_SYM_MD;
+			break;
+		case SK_FLOW_MODE_SYM_OR_REM:
+			Ctrl3 |= PHY_B_P_BOTH_MD;
+			break;
+		default:
+			SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_HWI_E016,
+				SKERR_HWI_E016MSG);
+		}
+
+		/* Restart Auto-negotiation */
+		Ctrl1 |= PHY_CT_ANE | PHY_CT_RE_CFG;
+	}
+	
+	/* Initialize LED register here? */
+	/* No. Please do it in SkDgXmitLed() (if required) and swap
+	   init order of LEDs and XMAC. (MAl) */
+	
+	/* Write 1000Base-T Control Register */
+	SkXmPhyWrite(pAC, IoC, Port, PHY_BCOM_1000T_CTRL, Ctrl2);
+	SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+		("Set 1000B-T Ctrl Reg=0x%04X\n", Ctrl2));
+	
+	/* Write AutoNeg Advertisement Register */
+	SkXmPhyWrite(pAC, IoC, Port, PHY_BCOM_AUNE_ADV, Ctrl3);
+	SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+		("Set Auto-Neg.Adv.Reg=0x%04X\n", Ctrl3));
+	
+	if (DoLoop) {
+		/* Set the Phy Loopback bit, too */
+		Ctrl1 |= PHY_CT_LOOP;
+	}
+
+	if (pAC->GIni.GIPortUsage == SK_JUMBO_LINK) {
+		/* configure FIFO to high latency for transmission of ext. packets */
+		Ctrl4 |= PHY_B_PEC_HIGH_LA;
+
+		/* configure reception of extended packets */
+		Ctrl5 |= PHY_B_AC_LONG_PACK;
+
+		SkXmPhyWrite(pAC, IoC, Port, PHY_BCOM_AUX_CTRL, Ctrl5);
+	}
+
+	/* Configure LED Traffic Mode and Jumbo Frame usage if specified */
+	SkXmPhyWrite(pAC, IoC, Port, PHY_BCOM_P_EXT_CTRL, Ctrl4);
+	
+	/* Write to the Phy control register */
+	SkXmPhyWrite(pAC, IoC, Port, PHY_BCOM_CTRL, Ctrl1);
+	SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+		("PHY Control Reg=0x%04X\n", Ctrl1));
+}	/* SkXmInitPhyBcom */
+#endif /* GENESIS */
+
+#ifdef YUKON
+/******************************************************************************
+ *
+ *	SkGmInitPhyMarv() - Initialize the Marvell Phy registers
+ *
+ * Description:	initializes all the Marvell Phy registers
+ *
+ * Note:
+ *
+ * Returns:
+ *	nothing
+ */
+static void SkGmInitPhyMarv(
+SK_AC	*pAC,		/* adapter context */
+SK_IOC	IoC,		/* IO context */
+int		Port,		/* Port Index (MAC_1 + n) */
+SK_BOOL	DoLoop)		/* Should a Phy LoopBack be set-up? */
+{
+	SK_GEPORT	*pPrt;
+	SK_U16		PhyCtrl;
+	SK_U16		C1000BaseT;
+	SK_U16		AutoNegAdv;
+	SK_U16		ExtPhyCtrl;
+	SK_U16		LedCtrl;
+	SK_BOOL		AutoNeg;
+#if defined(SK_DIAG) || defined(DEBUG)
+	SK_U16		PhyStat;
+	SK_U16		PhyStat1;
+	SK_U16		PhySpecStat;
+#endif /* SK_DIAG || DEBUG */
+
+	pPrt = &pAC->GIni.GP[Port];
+
+	/* Auto-negotiation ? */
+	if (pPrt->PLinkMode == SK_LMODE_HALF || pPrt->PLinkMode == SK_LMODE_FULL) {
+		AutoNeg = SK_FALSE;
+	}
+	else {
+		AutoNeg = SK_TRUE;
+	}
+	
+	SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+		("InitPhyMarv: Port %d, auto-negotiation %s\n",
+		 Port, AutoNeg ? "ON" : "OFF"));
+
+#ifdef VCPU
+	VCPUprintf(0, "SkGmInitPhyMarv(), Port=%u, DoLoop=%u\n",
+		Port, DoLoop);
+#else /* VCPU */
+	if (DoLoop) {
+		/* Set 'MAC Power up'-bit, set Manual MDI configuration */
+		SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_PHY_CTRL,
+			PHY_M_PC_MAC_POW_UP);
+	}
+	else if (AutoNeg && pPrt->PLinkSpeed == SK_LSPEED_AUTO) {
+		/* Read Ext. PHY Specific Control */
+		SkGmPhyRead(pAC, IoC, Port, PHY_MARV_EXT_CTRL, &ExtPhyCtrl);
+		
+		ExtPhyCtrl &= ~(PHY_M_EC_M_DSC_MSK | PHY_M_EC_S_DSC_MSK |
+			PHY_M_EC_MAC_S_MSK);
+		
+		ExtPhyCtrl |= PHY_M_EC_MAC_S(MAC_TX_CLK_25_MHZ) |
+			PHY_M_EC_M_DSC(0) | PHY_M_EC_S_DSC(1);
+	
+		SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_EXT_CTRL, ExtPhyCtrl);
+		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+			("Set Ext. PHY Ctrl=0x%04X\n", ExtPhyCtrl));
+	}
+
+	/* Read PHY Control */
+	SkGmPhyRead(pAC, IoC, Port, PHY_MARV_CTRL, &PhyCtrl);
+
+	if (!AutoNeg) {
+		/* Disable Auto-negotiation */
+		PhyCtrl &= ~PHY_CT_ANE;
+	}
+
+	PhyCtrl |= PHY_CT_RESET;
+	/* Assert software reset */
+	SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_CTRL, PhyCtrl);
+#endif /* VCPU */
+
+	PhyCtrl = 0 /* PHY_CT_COL_TST */;
+	C1000BaseT = 0;
+	AutoNegAdv = PHY_SEL_TYPE;
+
+	/* manually Master/Slave ? */
+	if (pPrt->PMSMode != SK_MS_MODE_AUTO) {
+		/* enable Manual Master/Slave */
+		C1000BaseT |= PHY_M_1000C_MSE;
+		
+		if (pPrt->PMSMode == SK_MS_MODE_MASTER) {
+			C1000BaseT |= PHY_M_1000C_MSC;	/* set it to Master */
+		}
+	}
+	
+	/* Auto-negotiation ? */
+	if (!AutoNeg) {
+		
+		if (pPrt->PLinkMode == SK_LMODE_FULL) {
+			/* Set Full Duplex Mode */
+			PhyCtrl |= PHY_CT_DUP_MD;
+		}
+
+		/* Set Master/Slave manually if not already done */
+		if (pPrt->PMSMode == SK_MS_MODE_AUTO) {
+			C1000BaseT |= PHY_M_1000C_MSE;	/* set it to Slave */
+		}
+
+		/* Set Speed */
+		switch (pPrt->PLinkSpeed) {
+		case SK_LSPEED_AUTO:
+		case SK_LSPEED_1000MBPS:
+			PhyCtrl |= PHY_CT_SP1000;
+			break;
+		case SK_LSPEED_100MBPS:
+			PhyCtrl |= PHY_CT_SP100;
+			break;
+		case SK_LSPEED_10MBPS:
+			break;
+		default:
+			SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_HWI_E019,
+				SKERR_HWI_E019MSG);
+		}
+
+		if (!DoLoop) {
+			PhyCtrl |= PHY_CT_RESET;
+		}
+	}
+	else {
+		/* Set Auto-negotiation advertisement */
+		
+		if (pAC->GIni.GICopperType) {
+			/* Set Speed capabilities */
+			switch (pPrt->PLinkSpeed) {
+			case SK_LSPEED_AUTO:
+				C1000BaseT |= PHY_M_1000C_AHD | PHY_M_1000C_AFD;
+				AutoNegAdv |= PHY_M_AN_100_FD | PHY_M_AN_100_HD |
+					PHY_M_AN_10_FD | PHY_M_AN_10_HD;
+				break;
+			case SK_LSPEED_1000MBPS:
+				C1000BaseT |= PHY_M_1000C_AHD | PHY_M_1000C_AFD;
+				break;
+			case SK_LSPEED_100MBPS:
+				AutoNegAdv |= PHY_M_AN_100_FD | PHY_M_AN_100_HD |
+					/* advertise 10Base-T also */
+					PHY_M_AN_10_FD | PHY_M_AN_10_HD;
+				break;
+			case SK_LSPEED_10MBPS:
+				AutoNegAdv |= PHY_M_AN_10_FD | PHY_M_AN_10_HD;
+				break;
+			default:
+				SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_HWI_E019,
+					SKERR_HWI_E019MSG);
+			}
+
+			/* Set Full/half duplex capabilities */
+			switch (pPrt->PLinkMode) {
+			case SK_LMODE_AUTOHALF:
+				C1000BaseT &= ~PHY_M_1000C_AFD;
+				AutoNegAdv &= ~(PHY_M_AN_100_FD | PHY_M_AN_10_FD);
+				break;
+			case SK_LMODE_AUTOFULL:
+				C1000BaseT &= ~PHY_M_1000C_AHD;
+				AutoNegAdv &= ~(PHY_M_AN_100_HD | PHY_M_AN_10_HD);
+				break;
+			case SK_LMODE_AUTOBOTH:
+				break;
+			default:
+				SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_HWI_E015,
+					SKERR_HWI_E015MSG);
+			}
+			
+			/* Set Flow-control capabilities */
+			switch (pPrt->PFlowCtrlMode) {
+			case SK_FLOW_MODE_NONE:
+				AutoNegAdv |= PHY_B_P_NO_PAUSE;
+				break;
+			case SK_FLOW_MODE_LOC_SEND:
+				AutoNegAdv |= PHY_B_P_ASYM_MD;
+				break;
+			case SK_FLOW_MODE_SYMMETRIC:
+				AutoNegAdv |= PHY_B_P_SYM_MD;
+				break;
+			case SK_FLOW_MODE_SYM_OR_REM:
+				AutoNegAdv |= PHY_B_P_BOTH_MD;
+				break;
+			default:
+				SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_HWI_E016,
+					SKERR_HWI_E016MSG);
+			}
+		}
+		else {	/* special defines for FIBER (88E1011S only) */
+			
+			/* Set Full/half duplex capabilities */
+			switch (pPrt->PLinkMode) {
+			case SK_LMODE_AUTOHALF:
+				AutoNegAdv |= PHY_M_AN_1000X_AHD;
+				break;
+			case SK_LMODE_AUTOFULL:
+				AutoNegAdv |= PHY_M_AN_1000X_AFD;
+				break;
+			case SK_LMODE_AUTOBOTH:
+				AutoNegAdv |= PHY_M_AN_1000X_AHD | PHY_M_AN_1000X_AFD;
+				break;
+			default:
+				SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_HWI_E015,
+					SKERR_HWI_E015MSG);
+			}
+			
+			/* Set Flow-control capabilities */
+			switch (pPrt->PFlowCtrlMode) {
+			case SK_FLOW_MODE_NONE:
+				AutoNegAdv |= PHY_M_P_NO_PAUSE_X;
+				break;
+			case SK_FLOW_MODE_LOC_SEND:
+				AutoNegAdv |= PHY_M_P_ASYM_MD_X;
+				break;
+			case SK_FLOW_MODE_SYMMETRIC:
+				AutoNegAdv |= PHY_M_P_SYM_MD_X;
+				break;
+			case SK_FLOW_MODE_SYM_OR_REM:
+				AutoNegAdv |= PHY_M_P_BOTH_MD_X;
+				break;
+			default:
+				SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_HWI_E016,
+					SKERR_HWI_E016MSG);
+			}
+		}
+
+		if (!DoLoop) {
+			/* Restart Auto-negotiation */
+			PhyCtrl |= PHY_CT_ANE | PHY_CT_RE_CFG;
+		}
+	}
+	
+#ifdef VCPU
+	/*
+	 * E-mail from Gu Lin (08-03-2002):
+	 */
+	
+	/* Program PHY register 30 as 16'h0708 for simulation speed up */
+	SkGmPhyWrite(pAC, IoC, Port, 30, 0x0700 /* 0x0708 */);
+	
+	VCpuWait(2000);
+
+#else /* VCPU */
+	
+	/* Write 1000Base-T Control Register */
+	SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_1000T_CTRL, C1000BaseT);
+	SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+		("Set 1000B-T Ctrl =0x%04X\n", C1000BaseT));
+	
+	/* Write AutoNeg Advertisement Register */
+	SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_AUNE_ADV, AutoNegAdv);
+	SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+		("Set Auto-Neg.Adv.=0x%04X\n", AutoNegAdv));
+#endif /* VCPU */
+	
+	if (DoLoop) {
+		/* Set the PHY Loopback bit */
+		PhyCtrl |= PHY_CT_LOOP;
+
+#ifdef XXX
+		/* Program PHY register 16 as 16'h0400 to force link good */
+		SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_PHY_CTRL, PHY_M_PC_FL_GOOD);
+#endif /* XXX */
+
+#ifndef VCPU
+		if (pPrt->PLinkSpeed != SK_LSPEED_AUTO) {
+			/* Write Ext. PHY Specific Control */
+			SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_EXT_CTRL,
+				(SK_U16)((pPrt->PLinkSpeed + 2) << 4));
+		}
+#endif /* VCPU */
+	}
+#ifdef TEST_ONLY
+	else if (pPrt->PLinkSpeed == SK_LSPEED_10MBPS) {
+			/* Write PHY Specific Control */
+			SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_PHY_CTRL,
+				PHY_M_PC_EN_DET_MSK);
+	}
+#endif
+
+	/* Write to the PHY Control register */
+	SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_CTRL, PhyCtrl);
+	SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+		("Set PHY Ctrl Reg.=0x%04X\n", PhyCtrl));
+
+#ifdef VCPU
+	VCpuWait(2000);
+#else
+
+	LedCtrl = PHY_M_LED_PULS_DUR(PULS_170MS) | PHY_M_LED_BLINK_RT(BLINK_84MS);
+
+	if ((pAC->GIni.GILedBlinkCtrl & SK_ACT_LED_BLINK) != 0) {
+		LedCtrl |= PHY_M_LEDC_RX_CTRL | PHY_M_LEDC_TX_CTRL;
+	}
+
+	if ((pAC->GIni.GILedBlinkCtrl & SK_DUP_LED_NORMAL) != 0) {
+		LedCtrl |= PHY_M_LEDC_DP_CTRL;
+	}
+	
+	SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_LED_CTRL, LedCtrl);
+
+	if ((pAC->GIni.GILedBlinkCtrl & SK_LED_LINK100_ON) != 0) {
+		/* only in forced 100 Mbps mode */
+		if (!AutoNeg && pPrt->PLinkSpeed == SK_LSPEED_100MBPS) {
+
+			SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_LED_OVER,
+				PHY_M_LED_MO_100(MO_LED_ON));
+		}
+	}
+
+#ifdef SK_DIAG
+	c_print("Set PHY Ctrl=0x%04X\n", PhyCtrl);
+	c_print("Set 1000 B-T=0x%04X\n", C1000BaseT);
+	c_print("Set Auto-Neg=0x%04X\n", AutoNegAdv);
+	c_print("Set Ext Ctrl=0x%04X\n", ExtPhyCtrl);
+#endif /* SK_DIAG */
+
+#if defined(SK_DIAG) || defined(DEBUG)
+	/* Read PHY Control */
+	SkGmPhyRead(pAC, IoC, Port, PHY_MARV_CTRL, &PhyCtrl);
+	SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+		("PHY Ctrl Reg.=0x%04X\n", PhyCtrl));
+	
+	/* Read 1000Base-T Control Register */
+	SkGmPhyRead(pAC, IoC, Port, PHY_MARV_1000T_CTRL, &C1000BaseT);
+	SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+		("1000B-T Ctrl =0x%04X\n", C1000BaseT));
+	
+	/* Read AutoNeg Advertisement Register */
+	SkGmPhyRead(pAC, IoC, Port, PHY_MARV_AUNE_ADV, &AutoNegAdv);
+	SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+		("Auto-Neg.Adv.=0x%04X\n", AutoNegAdv));
+	
+	/* Read Ext. PHY Specific Control */
+	SkGmPhyRead(pAC, IoC, Port, PHY_MARV_EXT_CTRL, &ExtPhyCtrl);
+	SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+		("Ext. PHY Ctrl=0x%04X\n", ExtPhyCtrl));
+	
+	/* Read PHY Status */
+	SkGmPhyRead(pAC, IoC, Port, PHY_MARV_STAT, &PhyStat);
+	SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+		("PHY Stat Reg.=0x%04X\n", PhyStat));
+	SkGmPhyRead(pAC, IoC, Port, PHY_MARV_STAT, &PhyStat1);
+	SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+		("PHY Stat Reg.=0x%04X\n", PhyStat1));
+	
+	/* Read PHY Specific Status */
+	SkGmPhyRead(pAC, IoC, Port, PHY_MARV_PHY_STAT, &PhySpecStat);
+	SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+		("PHY Spec Stat=0x%04X\n", PhySpecStat));
+#endif /* SK_DIAG || DEBUG */
+
+#ifdef SK_DIAG
+	c_print("PHY Ctrl Reg=0x%04X\n", PhyCtrl);
+	c_print("PHY 1000 Reg=0x%04X\n", C1000BaseT);
+	c_print("PHY AnAd Reg=0x%04X\n", AutoNegAdv);
+	c_print("Ext Ctrl Reg=0x%04X\n", ExtPhyCtrl);
+	c_print("PHY Stat Reg=0x%04X\n", PhyStat);
+	c_print("PHY Stat Reg=0x%04X\n", PhyStat1);
+	c_print("PHY Spec Reg=0x%04X\n", PhySpecStat);
+#endif /* SK_DIAG */
+
+#endif /* VCPU */
+
+}	/* SkGmInitPhyMarv */
+#endif /* YUKON */
+
+
+#ifdef OTHER_PHY
+/******************************************************************************
+ *
+ *	SkXmInitPhyLone() - Initialize the Level One Phy registers
+ *
+ * Description:	initializes all the Level One Phy registers
+ *
+ * Note:
+ *
+ * Returns:
+ *	nothing
+ */
+static void SkXmInitPhyLone(
+SK_AC	*pAC,		/* adapter context */
+SK_IOC	IoC,		/* IO context */
+int		Port,		/* Port Index (MAC_1 + n) */
+SK_BOOL	DoLoop)		/* Should a Phy LoopBack be set-up? */
+{
+	SK_GEPORT	*pPrt;
+	SK_U16		Ctrl1;
+	SK_U16		Ctrl2;
+	SK_U16		Ctrl3;
+
+	Ctrl1 = PHY_CT_SP1000;
+	Ctrl2 = 0;
+	Ctrl3 = PHY_SEL_TYPE;
+
+	pPrt = &pAC->GIni.GP[Port];
+
+	/* manually Master/Slave ? */
+	if (pPrt->PMSMode != SK_MS_MODE_AUTO) {
+		Ctrl2 |= PHY_L_1000C_MSE;
+		
+		if (pPrt->PMSMode == SK_MS_MODE_MASTER) {
+			Ctrl2 |= PHY_L_1000C_MSC;
+		}
+	}
+	/* Auto-negotiation ? */
+	if (pPrt->PLinkMode == SK_LMODE_HALF || pPrt->PLinkMode == SK_LMODE_FULL) {
+		/*
+		 * level one spec say: "1000 Mbps: manual mode not allowed"
+		 * but lets see what happens...
+		 */
+		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+			("InitPhyLone: no auto-negotiation Port %d\n", Port));
+		/* Set DuplexMode in Config register */
+		if (pPrt->PLinkMode == SK_LMODE_FULL) {
+			Ctrl1 |= PHY_CT_DUP_MD;
+		}
+
+		/* Determine Master/Slave manually if not already done */
+		if (pPrt->PMSMode == SK_MS_MODE_AUTO) {
+			Ctrl2 |= PHY_L_1000C_MSE;	/* set it to Slave */
+		}
+
+		/*
+		 * Do NOT enable Auto-negotiation here. This would hold
+		 * the link down because no IDLES are transmitted
+		 */
+	}
+	else {
+		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+			("InitPhyLone: with auto-negotiation Port %d\n", Port));
+		/* Set Auto-negotiation advertisement */
+
+		/* Set Full/half duplex capabilities */
+		switch (pPrt->PLinkMode) {
+		case SK_LMODE_AUTOHALF:
+			Ctrl2 |= PHY_L_1000C_AHD;
+			break;
+		case SK_LMODE_AUTOFULL:
+			Ctrl2 |= PHY_L_1000C_AFD;
+			break;
+		case SK_LMODE_AUTOBOTH:
+			Ctrl2 |= PHY_L_1000C_AFD | PHY_L_1000C_AHD;
+			break;
+		default:
+			SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_HWI_E015,
+				SKERR_HWI_E015MSG);
+		}
+
+		/* Set Flow-control capabilities */
+		switch (pPrt->PFlowCtrlMode) {
+		case SK_FLOW_MODE_NONE:
+			Ctrl3 |= PHY_L_P_NO_PAUSE;
+			break;
+		case SK_FLOW_MODE_LOC_SEND:
+			Ctrl3 |= PHY_L_P_ASYM_MD;
+			break;
+		case SK_FLOW_MODE_SYMMETRIC:
+			Ctrl3 |= PHY_L_P_SYM_MD;
+			break;
+		case SK_FLOW_MODE_SYM_OR_REM:
+			Ctrl3 |= PHY_L_P_BOTH_MD;
+			break;
+		default:
+			SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_HWI_E016,
+				SKERR_HWI_E016MSG);
+		}
+
+		/* Restart Auto-negotiation */
+		Ctrl1 = PHY_CT_ANE | PHY_CT_RE_CFG;
+	}
+	
+	/* Write 1000Base-T Control Register */
+	SkXmPhyWrite(pAC, IoC, Port, PHY_LONE_1000T_CTRL, Ctrl2);
+	SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+		("1000B-T Ctrl Reg=0x%04X\n", Ctrl2));
+	
+	/* Write AutoNeg Advertisement Register */
+	SkXmPhyWrite(pAC, IoC, Port, PHY_LONE_AUNE_ADV, Ctrl3);
+	SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+		("Auto-Neg.Adv.Reg=0x%04X\n", Ctrl3));
+
+	if (DoLoop) {
+		/* Set the Phy Loopback bit, too */
+		Ctrl1 |= PHY_CT_LOOP;
+	}
+
+	/* Write to the Phy control register */
+	SkXmPhyWrite(pAC, IoC, Port, PHY_LONE_CTRL, Ctrl1);
+	SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+		("PHY Control Reg=0x%04X\n", Ctrl1));
+}	/* SkXmInitPhyLone */
+
+
+/******************************************************************************
+ *
+ *	SkXmInitPhyNat() - Initialize the National Phy registers
+ *
+ * Description:	initializes all the National Phy registers
+ *
+ * Note:
+ *
+ * Returns:
+ *	nothing
+ */
+static void SkXmInitPhyNat(
+SK_AC	*pAC,		/* adapter context */
+SK_IOC	IoC,		/* IO context */
+int		Port,		/* Port Index (MAC_1 + n) */
+SK_BOOL	DoLoop)		/* Should a Phy LoopBack be set-up? */
+{
+/* todo: National */
+}	/* SkXmInitPhyNat */
+#endif /* OTHER_PHY */
+
+
+/******************************************************************************
+ *
+ *	SkMacInitPhy() - Initialize the PHY registers
+ *
+ * Description:	calls the Init PHY routines dep. on board type
+ *
+ * Note:
+ *
+ * Returns:
+ *	nothing
+ */
+void SkMacInitPhy(
+SK_AC	*pAC,		/* adapter context */
+SK_IOC	IoC,		/* IO context */
+int		Port,		/* Port Index (MAC_1 + n) */
+SK_BOOL	DoLoop)		/* Should a Phy LoopBack be set-up? */
+{
+	SK_GEPORT	*pPrt;
+
+	pPrt = &pAC->GIni.GP[Port];
+
+#ifdef GENESIS
+	if (pAC->GIni.GIGenesis) {
+		
+		switch (pPrt->PhyType) {
+		case SK_PHY_XMAC:
+			SkXmInitPhyXmac(pAC, IoC, Port, DoLoop);
+			break;
+		case SK_PHY_BCOM:
+			SkXmInitPhyBcom(pAC, IoC, Port, DoLoop);
+			break;
+#ifdef OTHER_PHY
+		case SK_PHY_LONE:
+			SkXmInitPhyLone(pAC, IoC, Port, DoLoop);
+			break;
+		case SK_PHY_NAT:
+			SkXmInitPhyNat(pAC, IoC, Port, DoLoop);
+			break;
+#endif /* OTHER_PHY */
+		}
+	}
+#endif /* GENESIS */
+	
+#ifdef YUKON
+	if (pAC->GIni.GIYukon) {
+		
+		SkGmInitPhyMarv(pAC, IoC, Port, DoLoop);
+	}
+#endif /* YUKON */
+
+}	/* SkMacInitPhy */
+
+
+#ifdef GENESIS
+/******************************************************************************
+ *
+ *	SkXmAutoNegDoneXmac() - Auto-negotiation handling
+ *
+ * Description:
+ *	This function handles the auto-negotiation if the Done bit is set.
+ *
+ * Returns:
+ *	SK_AND_OK	o.k.
+ *	SK_AND_DUP_CAP 	Duplex capability error happened
+ *	SK_AND_OTHER 	Other error happened
+ */
+static int SkXmAutoNegDoneXmac(
+SK_AC	*pAC,		/* adapter context */
+SK_IOC	IoC,		/* IO context */
+int		Port)		/* Port Index (MAC_1 + n) */
+{
+	SK_GEPORT	*pPrt;
+	SK_U16		ResAb;		/* Resolved Ability */
+	SK_U16		LPAb;		/* Link Partner Ability */
+
+	SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+		("AutoNegDoneXmac, Port %d\n", Port));
+
+	pPrt = &pAC->GIni.GP[Port];
+
+	/* Get PHY parameters */
+	SkXmPhyRead(pAC, IoC, Port, PHY_XMAC_AUNE_LP, &LPAb);
+	SkXmPhyRead(pAC, IoC, Port, PHY_XMAC_RES_ABI, &ResAb);
+
+	if ((LPAb & PHY_X_AN_RFB) != 0) {
+		/* At least one of the remote fault bit is set */
+		/* Error */
+		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+			("AutoNegFail: Remote fault bit set Port %d\n", Port));
+		pPrt->PAutoNegFail = SK_TRUE;
+		return(SK_AND_OTHER);
+	}
+
+	/* Check Duplex mismatch */
+	if ((ResAb & (PHY_X_RS_HD | PHY_X_RS_FD)) == PHY_X_RS_FD) {
+		pPrt->PLinkModeStatus = (SK_U8)SK_LMODE_STAT_AUTOFULL;
+	}
+	else if ((ResAb & (PHY_X_RS_HD | PHY_X_RS_FD)) == PHY_X_RS_HD) {
+		pPrt->PLinkModeStatus = (SK_U8)SK_LMODE_STAT_AUTOHALF;
+	}
+	else {
+		/* Error */
+		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+			("AutoNegFail: Duplex mode mismatch Port %d\n", Port));
+		pPrt->PAutoNegFail = SK_TRUE;
+		return(SK_AND_DUP_CAP);
+	}
+
+	/* Check PAUSE mismatch */
+	/* We are NOT using chapter 4.23 of the Xaqti manual */
+	/* We are using IEEE 802.3z/D5.0 Table 37-4 */
+	if ((pPrt->PFlowCtrlMode == SK_FLOW_MODE_SYMMETRIC ||
+	     pPrt->PFlowCtrlMode == SK_FLOW_MODE_SYM_OR_REM) &&
+	    (LPAb & PHY_X_P_SYM_MD) != 0) {
+		/* Symmetric PAUSE */
+		pPrt->PFlowCtrlStatus = SK_FLOW_STAT_SYMMETRIC;
+	}
+	else if (pPrt->PFlowCtrlMode == SK_FLOW_MODE_SYM_OR_REM &&
+		   (LPAb & PHY_X_RS_PAUSE) == PHY_X_P_ASYM_MD) {
+		/* Enable PAUSE receive, disable PAUSE transmit */
+		pPrt->PFlowCtrlStatus = SK_FLOW_STAT_REM_SEND;
+	}
+	else if (pPrt->PFlowCtrlMode == SK_FLOW_MODE_LOC_SEND &&
+		   (LPAb & PHY_X_RS_PAUSE) == PHY_X_P_BOTH_MD) {
+		/* Disable PAUSE receive, enable PAUSE transmit */
+		pPrt->PFlowCtrlStatus = SK_FLOW_STAT_LOC_SEND;
+	}
+	else {
+		/* PAUSE mismatch -> no PAUSE */
+		pPrt->PFlowCtrlStatus = SK_FLOW_STAT_NONE;
+	}
+	pPrt->PLinkSpeedUsed = (SK_U8)SK_LSPEED_STAT_1000MBPS;
+
+	return(SK_AND_OK);
+}	/* SkXmAutoNegDoneXmac */
+
+
+/******************************************************************************
+ *
+ *	SkXmAutoNegDoneBcom() - Auto-negotiation handling
+ *
+ * Description:
+ *	This function handles the auto-negotiation if the Done bit is set.
+ *
+ * Returns:
+ *	SK_AND_OK	o.k.
+ *	SK_AND_DUP_CAP 	Duplex capability error happened
+ *	SK_AND_OTHER 	Other error happened
+ */
+static int SkXmAutoNegDoneBcom(
+SK_AC	*pAC,		/* adapter context */
+SK_IOC	IoC,		/* IO context */
+int		Port)		/* Port Index (MAC_1 + n) */
+{
+	SK_GEPORT	*pPrt;
+	SK_U16		LPAb;		/* Link Partner Ability */
+	SK_U16		AuxStat;	/* Auxiliary Status */
+
+#ifdef TEST_ONLY
+01-Sep-2000 RA;:;:
+	SK_U16		ResAb;		/* Resolved Ability */
+#endif	/* 0 */
+
+	SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+		("AutoNegDoneBcom, Port %d\n", Port));
+	pPrt = &pAC->GIni.GP[Port];
+
+	/* Get PHY parameters */
+	SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUNE_LP, &LPAb);
+#ifdef TEST_ONLY
+01-Sep-2000 RA;:;:
+	SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_1000T_STAT, &ResAb);
+#endif	/* 0 */
+	
+	SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUX_STAT, &AuxStat);
+
+	if ((LPAb & PHY_B_AN_RF) != 0) {
+		/* Remote fault bit is set: Error */
+		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+			("AutoNegFail: Remote fault bit set Port %d\n", Port));
+		pPrt->PAutoNegFail = SK_TRUE;
+		return(SK_AND_OTHER);
+	}
+
+	/* Check Duplex mismatch */
+	if ((AuxStat & PHY_B_AS_AN_RES_MSK) == PHY_B_RES_1000FD) {
+		pPrt->PLinkModeStatus = (SK_U8)SK_LMODE_STAT_AUTOFULL;
+	}
+	else if ((AuxStat & PHY_B_AS_AN_RES_MSK) == PHY_B_RES_1000HD) {
+		pPrt->PLinkModeStatus = (SK_U8)SK_LMODE_STAT_AUTOHALF;
+	}
+	else {
+		/* Error */
+		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+			("AutoNegFail: Duplex mode mismatch Port %d\n", Port));
+		pPrt->PAutoNegFail = SK_TRUE;
+		return(SK_AND_DUP_CAP);
+	}
+	
+#ifdef TEST_ONLY
+01-Sep-2000 RA;:;:
+	/* Check Master/Slave resolution */
+	if ((ResAb & PHY_B_1000S_MSF) != 0) {
+		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+			("Master/Slave Fault Port %d\n", Port));
+		pPrt->PAutoNegFail = SK_TRUE;
+		pPrt->PMSStatus = SK_MS_STAT_FAULT;
+		return(SK_AND_OTHER);
+	}
+	
+	pPrt->PMSStatus = ((ResAb & PHY_B_1000S_MSR) != 0) ?
+		SK_MS_STAT_MASTER : SK_MS_STAT_SLAVE;
+#endif	/* 0 */
+
+	/* Check PAUSE mismatch ??? */
+	/* We are using IEEE 802.3z/D5.0 Table 37-4 */
+	if ((AuxStat & PHY_B_AS_PAUSE_MSK) == PHY_B_AS_PAUSE_MSK) {
+		/* Symmetric PAUSE */
+		pPrt->PFlowCtrlStatus = SK_FLOW_STAT_SYMMETRIC;
+	}
+	else if ((AuxStat & PHY_B_AS_PAUSE_MSK) == PHY_B_AS_PRR) {
+		/* Enable PAUSE receive, disable PAUSE transmit */
+		pPrt->PFlowCtrlStatus = SK_FLOW_STAT_REM_SEND;
+	}
+	else if ((AuxStat & PHY_B_AS_PAUSE_MSK) == PHY_B_AS_PRT) {
+		/* Disable PAUSE receive, enable PAUSE transmit */
+		pPrt->PFlowCtrlStatus = SK_FLOW_STAT_LOC_SEND;
+	}
+	else {
+		/* PAUSE mismatch -> no PAUSE */
+		pPrt->PFlowCtrlStatus = SK_FLOW_STAT_NONE;
+	}
+	pPrt->PLinkSpeedUsed = (SK_U8)SK_LSPEED_STAT_1000MBPS;
+
+	return(SK_AND_OK);
+}	/* SkXmAutoNegDoneBcom */
+#endif /* GENESIS */
+
+
+#ifdef YUKON
+/******************************************************************************
+ *
+ *	SkGmAutoNegDoneMarv() - Auto-negotiation handling
+ *
+ * Description:
+ *	This function handles the auto-negotiation if the Done bit is set.
+ *
+ * Returns:
+ *	SK_AND_OK	o.k.
+ *	SK_AND_DUP_CAP 	Duplex capability error happened
+ *	SK_AND_OTHER 	Other error happened
+ */
+static int SkGmAutoNegDoneMarv(
+SK_AC	*pAC,		/* adapter context */
+SK_IOC	IoC,		/* IO context */
+int		Port)		/* Port Index (MAC_1 + n) */
+{
+	SK_GEPORT	*pPrt;
+	SK_U16		LPAb;		/* Link Partner Ability */
+	SK_U16		ResAb;		/* Resolved Ability */
+	SK_U16		AuxStat;	/* Auxiliary Status */
+
+	SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+		("AutoNegDoneMarv, Port %d\n", Port));
+	pPrt = &pAC->GIni.GP[Port];
+
+	/* Get PHY parameters */
+	SkGmPhyRead(pAC, IoC, Port, PHY_MARV_AUNE_LP, &LPAb);
+	SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+		("Link P.Abil.=0x%04X\n", LPAb));
+	
+	if ((LPAb & PHY_M_AN_RF) != 0) {
+		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+			("AutoNegFail: Remote fault bit set Port %d\n", Port));
+		pPrt->PAutoNegFail = SK_TRUE;
+		return(SK_AND_OTHER);
+	}
+
+	SkGmPhyRead(pAC, IoC, Port, PHY_MARV_1000T_STAT, &ResAb);
+	
+	/* Check Master/Slave resolution */
+	if ((ResAb & PHY_B_1000S_MSF) != 0) {
+		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+			("Master/Slave Fault Port %d\n", Port));
+		pPrt->PAutoNegFail = SK_TRUE;
+		pPrt->PMSStatus = SK_MS_STAT_FAULT;
+		return(SK_AND_OTHER);
+	}
+	
+	pPrt->PMSStatus = ((ResAb & PHY_B_1000S_MSR) != 0) ?
+		(SK_U8)SK_MS_STAT_MASTER : (SK_U8)SK_MS_STAT_SLAVE;
+	
+	/* Read PHY Specific Status */
+	SkGmPhyRead(pAC, IoC, Port, PHY_MARV_PHY_STAT, &AuxStat);
+	
+	/* Check Speed & Duplex resolved */
+	if ((AuxStat & PHY_M_PS_SPDUP_RES) == 0) {
+		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+			("AutoNegFail: Speed & Duplex not resolved, Port %d\n", Port));
+		pPrt->PAutoNegFail = SK_TRUE;
+		pPrt->PLinkModeStatus = (SK_U8)SK_LMODE_STAT_UNKNOWN;
+		return(SK_AND_DUP_CAP);
+	}
+	
+	if ((AuxStat & PHY_M_PS_FULL_DUP) != 0) {
+		pPrt->PLinkModeStatus = (SK_U8)SK_LMODE_STAT_AUTOFULL;
+	}
+	else {
+		pPrt->PLinkModeStatus = (SK_U8)SK_LMODE_STAT_AUTOHALF;
+	}
+	
+	/* Check PAUSE mismatch ??? */
+	/* We are using IEEE 802.3z/D5.0 Table 37-4 */
+	if ((AuxStat & PHY_M_PS_PAUSE_MSK) == PHY_M_PS_PAUSE_MSK) {
+		/* Symmetric PAUSE */
+		pPrt->PFlowCtrlStatus = SK_FLOW_STAT_SYMMETRIC;
+	}
+	else if ((AuxStat & PHY_M_PS_PAUSE_MSK) == PHY_M_PS_RX_P_EN) {
+		/* Enable PAUSE receive, disable PAUSE transmit */
+		pPrt->PFlowCtrlStatus = SK_FLOW_STAT_REM_SEND;
+	}
+	else if ((AuxStat & PHY_M_PS_PAUSE_MSK) == PHY_M_PS_TX_P_EN) {
+		/* Disable PAUSE receive, enable PAUSE transmit */
+		pPrt->PFlowCtrlStatus = SK_FLOW_STAT_LOC_SEND;
+	}
+	else {
+		/* PAUSE mismatch -> no PAUSE */
+		pPrt->PFlowCtrlStatus = SK_FLOW_STAT_NONE;
+	}
+	
+	/* set used link speed */
+	switch ((unsigned)(AuxStat & PHY_M_PS_SPEED_MSK)) {
+	case (unsigned)PHY_M_PS_SPEED_1000:
+		pPrt->PLinkSpeedUsed = (SK_U8)SK_LSPEED_STAT_1000MBPS;
+		break;
+	case PHY_M_PS_SPEED_100:
+		pPrt->PLinkSpeedUsed = (SK_U8)SK_LSPEED_STAT_100MBPS;
+		break;
+	default:
+		pPrt->PLinkSpeedUsed = (SK_U8)SK_LSPEED_STAT_10MBPS;
+	}
+
+	return(SK_AND_OK);
+}	/* SkGmAutoNegDoneMarv */
+#endif /* YUKON */
+
+
+#ifdef OTHER_PHY
+/******************************************************************************
+ *
+ *	SkXmAutoNegDoneLone() - Auto-negotiation handling
+ *
+ * Description:
+ *	This function handles the auto-negotiation if the Done bit is set.
+ *
+ * Returns:
+ *	SK_AND_OK	o.k.
+ *	SK_AND_DUP_CAP 	Duplex capability error happened
+ *	SK_AND_OTHER 	Other error happened
+ */
+static int SkXmAutoNegDoneLone(
+SK_AC	*pAC,		/* adapter context */
+SK_IOC	IoC,		/* IO context */
+int		Port)		/* Port Index (MAC_1 + n) */
+{
+	SK_GEPORT	*pPrt;
+	SK_U16		ResAb;		/* Resolved Ability */
+	SK_U16		LPAb;		/* Link Partner Ability */
+	SK_U16		QuickStat;	/* Auxiliary Status */
+
+	SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+		("AutoNegDoneLone, Port %d\n", Port));
+	pPrt = &pAC->GIni.GP[Port];
+
+	/* Get PHY parameters */
+	SkXmPhyRead(pAC, IoC, Port, PHY_LONE_AUNE_LP, &LPAb);
+	SkXmPhyRead(pAC, IoC, Port, PHY_LONE_1000T_STAT, &ResAb);
+	SkXmPhyRead(pAC, IoC, Port, PHY_LONE_Q_STAT, &QuickStat);
+
+	if ((LPAb & PHY_L_AN_RF) != 0) {
+		/* Remote fault bit is set */
+		/* Error */
+		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+			("AutoNegFail: Remote fault bit set Port %d\n", Port));
+		pPrt->PAutoNegFail = SK_TRUE;
+		return(SK_AND_OTHER);
+	}
+
+	/* Check Duplex mismatch */
+	if ((QuickStat & PHY_L_QS_DUP_MOD) != 0) {
+		pPrt->PLinkModeStatus = (SK_U8)SK_LMODE_STAT_AUTOFULL;
+	}
+	else {
+		pPrt->PLinkModeStatus = (SK_U8)SK_LMODE_STAT_AUTOHALF;
+	}
+	
+	/* Check Master/Slave resolution */
+	if ((ResAb & PHY_L_1000S_MSF) != 0) {
+		/* Error */
+		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+			("Master/Slave Fault Port %d\n", Port));
+		pPrt->PAutoNegFail = SK_TRUE;
+		pPrt->PMSStatus = SK_MS_STAT_FAULT;
+		return(SK_AND_OTHER);
+	}
+	else if (ResAb & PHY_L_1000S_MSR) {
+		pPrt->PMSStatus = SK_MS_STAT_MASTER;
+	}
+	else {
+		pPrt->PMSStatus = SK_MS_STAT_SLAVE;
+	}
+
+	/* Check PAUSE mismatch */
+	/* We are using IEEE 802.3z/D5.0 Table 37-4 */
+	/* we must manually resolve the abilities here */
+	pPrt->PFlowCtrlStatus = SK_FLOW_STAT_NONE;
+	
+	switch (pPrt->PFlowCtrlMode) {
+	case SK_FLOW_MODE_NONE:
+		/* default */
+		break;
+	case SK_FLOW_MODE_LOC_SEND:
+		if ((QuickStat & (PHY_L_QS_PAUSE | PHY_L_QS_AS_PAUSE)) ==
+			(PHY_L_QS_PAUSE | PHY_L_QS_AS_PAUSE)) {
+			/* Disable PAUSE receive, enable PAUSE transmit */
+			pPrt->PFlowCtrlStatus = SK_FLOW_STAT_LOC_SEND;
+		}
+		break;
+	case SK_FLOW_MODE_SYMMETRIC:
+		if ((QuickStat & PHY_L_QS_PAUSE) != 0) {
+			/* Symmetric PAUSE */
+			pPrt->PFlowCtrlStatus = SK_FLOW_STAT_SYMMETRIC;
+		}
+		break;
+	case SK_FLOW_MODE_SYM_OR_REM:
+		if ((QuickStat & (PHY_L_QS_PAUSE | PHY_L_QS_AS_PAUSE)) ==
+			PHY_L_QS_AS_PAUSE) {
+			/* Enable PAUSE receive, disable PAUSE transmit */
+			pPrt->PFlowCtrlStatus = SK_FLOW_STAT_REM_SEND;
+		}
+		else if ((QuickStat & PHY_L_QS_PAUSE) != 0) {
+			/* Symmetric PAUSE */
+			pPrt->PFlowCtrlStatus = SK_FLOW_STAT_SYMMETRIC;
+		}
+		break;
+	default:
+		SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_HWI_E016,
+			SKERR_HWI_E016MSG);
+	}
+	
+	return(SK_AND_OK);
+}	/* SkXmAutoNegDoneLone */
+
+
+/******************************************************************************
+ *
+ *	SkXmAutoNegDoneNat() - Auto-negotiation handling
+ *
+ * Description:
+ *	This function handles the auto-negotiation if the Done bit is set.
+ *
+ * Returns:
+ *	SK_AND_OK	o.k.
+ *	SK_AND_DUP_CAP 	Duplex capability error happened
+ *	SK_AND_OTHER 	Other error happened
+ */
+static int SkXmAutoNegDoneNat(
+SK_AC	*pAC,		/* adapter context */
+SK_IOC	IoC,		/* IO context */
+int		Port)		/* Port Index (MAC_1 + n) */
+{
+/* todo: National */
+	return(SK_AND_OK);
+}	/* SkXmAutoNegDoneNat */
+#endif /* OTHER_PHY */
+
+
+/******************************************************************************
+ *
+ *	SkMacAutoNegDone() - Auto-negotiation handling
+ *
+ * Description:	calls the auto-negotiation done routines dep. on board type
+ *
+ * Returns:
+ *	SK_AND_OK	o.k.
+ *	SK_AND_DUP_CAP 	Duplex capability error happened
+ *	SK_AND_OTHER 	Other error happened
+ */
+int	SkMacAutoNegDone(
+SK_AC	*pAC,		/* adapter context */
+SK_IOC	IoC,		/* IO context */
+int		Port)		/* Port Index (MAC_1 + n) */
+{
+	SK_GEPORT	*pPrt;
+	int	Rtv;
+
+	Rtv = SK_AND_OK;
+
+	pPrt = &pAC->GIni.GP[Port];
+
+#ifdef GENESIS
+	if (pAC->GIni.GIGenesis) {
+		
+		switch (pPrt->PhyType) {
+		
+		case SK_PHY_XMAC:
+			Rtv = SkXmAutoNegDoneXmac(pAC, IoC, Port);
+			break;
+		case SK_PHY_BCOM:
+			Rtv = SkXmAutoNegDoneBcom(pAC, IoC, Port);
+			break;
+#ifdef OTHER_PHY
+		case SK_PHY_LONE:
+			Rtv = SkXmAutoNegDoneLone(pAC, IoC, Port);
+			break;
+		case SK_PHY_NAT:
+			Rtv = SkXmAutoNegDoneNat(pAC, IoC, Port);
+			break;
+#endif /* OTHER_PHY */
+		default:
+			return(SK_AND_OTHER);
+		}
+	}
+#endif /* GENESIS */
+	
+#ifdef YUKON
+	if (pAC->GIni.GIYukon) {
+		
+		Rtv = SkGmAutoNegDoneMarv(pAC, IoC, Port);
+	}
+#endif /* YUKON */
+	
+	if (Rtv != SK_AND_OK) {
+		return(Rtv);
+	}
+
+	SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+		("AutoNeg done Port %d\n", Port));
+	
+	/* We checked everything and may now enable the link */
+	pPrt->PAutoNegFail = SK_FALSE;
+
+	SkMacRxTxEnable(pAC, IoC, Port);
+	
+	return(SK_AND_OK);
+}	/* SkMacAutoNegDone */
+
+
+/******************************************************************************
+ *
+ *	SkMacRxTxEnable() - Enable Rx/Tx activity if port is up
+ *
+ * Description:	enables Rx/Tx dep. on board type
+ *
+ * Returns:
+ *	0	o.k.
+ *	!= 0	Error happened
+ */
+int SkMacRxTxEnable(
+SK_AC	*pAC,		/* adapter context */
+SK_IOC	IoC,		/* IO context */
+int		Port)		/* Port Index (MAC_1 + n) */
+{
+	SK_GEPORT	*pPrt;
+	SK_U16		Reg;		/* 16-bit register value */
+	SK_U16		IntMask;	/* MAC interrupt mask */
+#ifdef GENESIS
+	SK_U16		SWord;
+#endif
+
+	pPrt = &pAC->GIni.GP[Port];
+
+	if (!pPrt->PHWLinkUp) {
+		/* The Hardware link is NOT up */
+		return(0);
+	}
+
+	if ((pPrt->PLinkMode == SK_LMODE_AUTOHALF ||
+	     pPrt->PLinkMode == SK_LMODE_AUTOFULL ||
+	     pPrt->PLinkMode == SK_LMODE_AUTOBOTH) &&
+	     pPrt->PAutoNegFail) {
+		/* Auto-negotiation is not done or failed */
+		return(0);
+	}
+
+#ifdef GENESIS
+	if (pAC->GIni.GIGenesis) {
+		/* set Duplex Mode and Pause Mode */
+		SkXmInitDupMd(pAC, IoC, Port);
+		
+		SkXmInitPauseMd(pAC, IoC, Port);
+	
+		/*
+		 * Initialize the Interrupt Mask Register. Default IRQs are...
+		 *	- Link Asynchronous Event
+		 *	- Link Partner requests config
+		 *	- Auto Negotiation Done
+		 *	- Rx Counter Event Overflow
+		 *	- Tx Counter Event Overflow
+		 *	- Transmit FIFO Underrun
+		 */
+		IntMask = XM_DEF_MSK;
+
+#ifdef DEBUG
+		/* add IRQ for Receive FIFO Overflow */
+		IntMask &= ~XM_IS_RXF_OV;
+#endif /* DEBUG */
+		
+		if (pPrt->PhyType != SK_PHY_XMAC) {
+			/* disable GP0 interrupt bit */
+			IntMask |= XM_IS_INP_ASS;
+		}
+		XM_OUT16(IoC, Port, XM_IMSK, IntMask);
+	
+		/* get MMU Command Reg. */
+		XM_IN16(IoC, Port, XM_MMU_CMD, &Reg);
+		
+		if (pPrt->PhyType != SK_PHY_XMAC &&
+			(pPrt->PLinkModeStatus == SK_LMODE_STAT_FULL ||
+			 pPrt->PLinkModeStatus == SK_LMODE_STAT_AUTOFULL)) {
+			/* set to Full Duplex */
+			Reg |= XM_MMU_GMII_FD;
+		}
+		
+		switch (pPrt->PhyType) {
+		case SK_PHY_BCOM:
+			/*
+			 * Workaround BCOM Errata (#10523) for all BCom Phys
+			 * Enable Power Management after link up
+			 */
+			SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUX_CTRL, &SWord);
+			SkXmPhyWrite(pAC, IoC, Port, PHY_BCOM_AUX_CTRL,
+				(SK_U16)(SWord & ~PHY_B_AC_DIS_PM));
+            SkXmPhyWrite(pAC, IoC, Port, PHY_BCOM_INT_MASK,
+				(SK_U16)PHY_B_DEF_MSK);
+			break;
+#ifdef OTHER_PHY
+		case SK_PHY_LONE:
+			SkXmPhyWrite(pAC, IoC, Port, PHY_LONE_INT_ENAB, PHY_L_DEF_MSK);
+			break;
+		case SK_PHY_NAT:
+			/* todo National:
+			SkXmPhyWrite(pAC, IoC, Port, PHY_NAT_INT_MASK, PHY_N_DEF_MSK); */
+			/* no interrupts possible from National ??? */
+			break;
+#endif /* OTHER_PHY */
+		}
+		
+		/* enable Rx/Tx */
+		XM_OUT16(IoC, Port, XM_MMU_CMD, Reg | XM_MMU_ENA_RX | XM_MMU_ENA_TX);
+	}
+#endif /* GENESIS */
+	
+#ifdef YUKON
+	if (pAC->GIni.GIYukon) {
+		/*
+		 * Initialize the Interrupt Mask Register. Default IRQs are...
+		 *	- Rx Counter Event Overflow
+		 *	- Tx Counter Event Overflow
+		 *	- Transmit FIFO Underrun
+		 */
+		IntMask = GMAC_DEF_MSK;
+
+#ifdef DEBUG
+		/* add IRQ for Receive FIFO Overrun */
+		IntMask |= GM_IS_RX_FF_OR;
+#endif /* DEBUG */
+		
+		SK_OUT8(IoC, GMAC_IRQ_MSK, (SK_U8)IntMask);
+		
+		/* get General Purpose Control */
+		GM_IN16(IoC, Port, GM_GP_CTRL, &Reg);
+		
+		if (pPrt->PLinkModeStatus == SK_LMODE_STAT_FULL ||
+			pPrt->PLinkModeStatus == SK_LMODE_STAT_AUTOFULL) {
+			/* set to Full Duplex */
+			Reg |= GM_GPCR_DUP_FULL;
+		}
+		
+		/* enable Rx/Tx */
+        GM_OUT16(IoC, Port, GM_GP_CTRL, (SK_U16)(Reg | GM_GPCR_RX_ENA |
+			GM_GPCR_TX_ENA));
+
+#ifndef VCPU
+		/* Enable all PHY interrupts */
+        SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_INT_MASK,
+			(SK_U16)PHY_M_DEF_MSK);
+#endif /* VCPU */
+	}
+#endif /* YUKON */
+					
+	return(0);
+
+}	/* SkMacRxTxEnable */
+
+
+/******************************************************************************
+ *
+ *	SkMacRxTxDisable() - Disable Receiver and Transmitter
+ *
+ * Description:	disables Rx/Tx dep. on board type
+ *
+ * Returns: N/A
+ */
+void SkMacRxTxDisable(
+SK_AC	*pAC,		/* Adapter Context */
+SK_IOC	IoC,		/* IO context */
+int		Port)		/* Port Index (MAC_1 + n) */
+{
+	SK_U16	Word;
+
+#ifdef GENESIS
+	if (pAC->GIni.GIGenesis) {
+		
+		XM_IN16(IoC, Port, XM_MMU_CMD, &Word);
+		
+		XM_OUT16(IoC, Port, XM_MMU_CMD, Word & ~(XM_MMU_ENA_RX | XM_MMU_ENA_TX));
+	
+		/* dummy read to ensure writing */
+		XM_IN16(IoC, Port, XM_MMU_CMD, &Word);
+	}
+#endif /* GENESIS */
+	
+#ifdef YUKON
+	if (pAC->GIni.GIYukon) {
+		
+		GM_IN16(IoC, Port, GM_GP_CTRL, &Word);
+
+        GM_OUT16(IoC, Port, GM_GP_CTRL, (SK_U16)(Word & ~(GM_GPCR_RX_ENA |
+			GM_GPCR_TX_ENA)));
+
+		/* dummy read to ensure writing */
+		GM_IN16(IoC, Port, GM_GP_CTRL, &Word);
+	}
+#endif /* YUKON */
+
+}	/* SkMacRxTxDisable */
+
+
+/******************************************************************************
+ *
+ *	SkMacIrqDisable() - Disable IRQ from MAC
+ *
+ * Description:	sets the IRQ-mask to disable IRQ dep. on board type
+ *
+ * Returns: N/A
+ */
+void SkMacIrqDisable(
+SK_AC	*pAC,		/* Adapter Context */
+SK_IOC	IoC,		/* IO context */
+int		Port)		/* Port Index (MAC_1 + n) */
+{
+	SK_GEPORT	*pPrt;
+#ifdef GENESIS
+	SK_U16		Word;
+#endif
+
+	pPrt = &pAC->GIni.GP[Port];
+
+#ifdef GENESIS
+	if (pAC->GIni.GIGenesis) {
+		
+		/* disable all XMAC IRQs */
+		XM_OUT16(IoC, Port, XM_IMSK, 0xffff);	
+		
+		/* Disable all PHY interrupts */
+		switch (pPrt->PhyType) {
+			case SK_PHY_BCOM:
+				/* Make sure that PHY is initialized */
+				if (pPrt->PState != SK_PRT_RESET) {
+					/* NOT allowed if BCOM is in RESET state */
+					/* Workaround BCOM Errata (#10523) all BCom */
+					/* Disable Power Management if link is down */
+					SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUX_CTRL, &Word);
+					SkXmPhyWrite(pAC, IoC, Port, PHY_BCOM_AUX_CTRL,
+						(SK_U16)(Word | PHY_B_AC_DIS_PM));
+					SkXmPhyWrite(pAC, IoC, Port, PHY_BCOM_INT_MASK, 0xffff);
+				}
+				break;
+#ifdef OTHER_PHY
+			case SK_PHY_LONE:
+				SkXmPhyWrite(pAC, IoC, Port, PHY_LONE_INT_ENAB, 0);
+				break;
+			case SK_PHY_NAT:
+				/* todo: National
+				SkXmPhyWrite(pAC, IoC, Port, PHY_NAT_INT_MASK, 0xffff); */
+				break;
+#endif /* OTHER_PHY */
+		}
+	}
+#endif /* GENESIS */
+	
+#ifdef YUKON
+	if (pAC->GIni.GIYukon) {
+		/* disable all GMAC IRQs */
+		SK_OUT8(IoC, GMAC_IRQ_MSK, 0);
+		
+#ifndef VCPU
+		/* Disable all PHY interrupts */
+		SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_INT_MASK, 0);
+#endif /* VCPU */
+	}
+#endif /* YUKON */
+
+}	/* SkMacIrqDisable */
+
+
+#ifdef SK_DIAG
+/******************************************************************************
+ *
+ *	SkXmSendCont() - Enable / Disable Send Continuous Mode
+ *
+ * Description:	enable / disable Send Continuous Mode on XMAC
+ *
+ * Returns:
+ *	nothing
+ */
+void SkXmSendCont(
+SK_AC	*pAC,	/* adapter context */
+SK_IOC	IoC,	/* IO context */
+int		Port,	/* Port Index (MAC_1 + n) */
+SK_BOOL	Enable)	/* Enable / Disable */
+{
+	SK_U32	MdReg;
+
+	XM_IN32(IoC, Port, XM_MODE, &MdReg);
+
+	if (Enable) {
+		MdReg |= XM_MD_TX_CONT;
+	}
+	else {
+		MdReg &= ~XM_MD_TX_CONT;
+	}
+	/* setup Mode Register */
+	XM_OUT32(IoC, Port, XM_MODE, MdReg);
+
+}	/* SkXmSendCont */
+
+
+/******************************************************************************
+ *
+ *	SkMacTimeStamp() - Enable / Disable Time Stamp
+ *
+ * Description:	enable / disable Time Stamp generation for Rx packets
+ *
+ * Returns:
+ *	nothing
+ */
+void SkMacTimeStamp(
+SK_AC	*pAC,	/* adapter context */
+SK_IOC	IoC,	/* IO context */
+int		Port,	/* Port Index (MAC_1 + n) */
+SK_BOOL	Enable)	/* Enable / Disable */
+{
+	SK_U32	MdReg;
+	SK_U8	TimeCtrl;
+
+	if (pAC->GIni.GIGenesis) {
+
+		XM_IN32(IoC, Port, XM_MODE, &MdReg);
+
+		if (Enable) {
+			MdReg |= XM_MD_ATS;
+		}
+		else {
+			MdReg &= ~XM_MD_ATS;
+		}
+		/* setup Mode Register */
+		XM_OUT32(IoC, Port, XM_MODE, MdReg);
+	}
+	else {
+		if (Enable) {
+			TimeCtrl = GMT_ST_START | GMT_ST_CLR_IRQ;
+		}
+		else {
+			TimeCtrl = GMT_ST_STOP | GMT_ST_CLR_IRQ;
+		}
+		/* Start/Stop Time Stamp Timer */
+		SK_OUT8(IoC, GMAC_TI_ST_CTRL, TimeCtrl);
+	}
+
+}	/* SkMacTimeStamp*/
+
+#else /* !SK_DIAG */
+
+#ifdef GENESIS
+/******************************************************************************
+ *
+ *	SkXmAutoNegLipaXmac() - Decides whether Link Partner could do auto-neg
+ *
+ *	This function analyses the Interrupt status word. If any of the
+ *	Auto-negotiating interrupt bits are set, the PLipaAutoNeg variable
+ *	is set true.
+ */
+void SkXmAutoNegLipaXmac(
+SK_AC	*pAC,		/* adapter context */
+SK_IOC	IoC,		/* IO context */
+int		Port,		/* Port Index (MAC_1 + n) */
+SK_U16	IStatus)	/* Interrupt Status word to analyse */
+{
+	SK_GEPORT	*pPrt;
+
+	pPrt = &pAC->GIni.GP[Port];
+
+	if (pPrt->PLipaAutoNeg != SK_LIPA_AUTO &&
+		(IStatus & (XM_IS_LIPA_RC | XM_IS_RX_PAGE | XM_IS_AND)) != 0) {
+
+		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+			("AutoNegLipa: AutoNeg detected on Port %d, IStatus=0x%04X\n",
+			Port, IStatus));
+		pPrt->PLipaAutoNeg = SK_LIPA_AUTO;
+	}
+}	/* SkXmAutoNegLipaXmac */
+#endif /* GENESIS */
+
+
+/******************************************************************************
+ *
+ *	SkMacAutoNegLipaPhy() - Decides whether Link Partner could do auto-neg
+ *
+ *	This function analyses the PHY status word.
+ *  If any of the Auto-negotiating bits are set, the PLipaAutoNeg variable
+ *	is set true.
+ */
+void SkMacAutoNegLipaPhy(
+SK_AC	*pAC,		/* adapter context */
+SK_IOC	IoC,		/* IO context */
+int		Port,		/* Port Index (MAC_1 + n) */
+SK_U16	PhyStat)	/* PHY Status word to analyse */
+{
+	SK_GEPORT	*pPrt;
+
+	pPrt = &pAC->GIni.GP[Port];
+
+	if (pPrt->PLipaAutoNeg != SK_LIPA_AUTO &&
+		(PhyStat & PHY_ST_AN_OVER) != 0) {
+
+		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+			("AutoNegLipa: AutoNeg detected on Port %d, PhyStat=0x%04X\n",
+			Port, PhyStat));
+		pPrt->PLipaAutoNeg = SK_LIPA_AUTO;
+	}
+}	/* SkMacAutoNegLipaPhy */
+
+
+#ifdef GENESIS
+/******************************************************************************
+ *
+ *	SkXmIrq() - Interrupt Service Routine
+ *
+ * Description:	services an Interrupt Request of the XMAC
+ *
+ * Note:
+ *	With an external PHY, some interrupt bits are not meaningfull any more:
+ *	- LinkAsyncEvent (bit #14)              XM_IS_LNK_AE
+ *	- LinkPartnerReqConfig (bit #10)	XM_IS_LIPA_RC
+ *	- Page Received (bit #9)		XM_IS_RX_PAGE
+ *	- NextPageLoadedForXmt (bit #8)		XM_IS_TX_PAGE
+ *	- AutoNegDone (bit #7)			XM_IS_AND
+ *	Also probably not valid any more is the GP0 input bit:
+ *	- GPRegisterBit0set			XM_IS_INP_ASS
+ *
+ * Returns:
+ *	nothing
+ */
+static void SkXmIrq(
+SK_AC	*pAC,		/* adapter context */
+SK_IOC	IoC,		/* IO context */
+int		Port)		/* Port Index (MAC_1 + n) */
+{
+	SK_GEPORT	*pPrt;
+	SK_EVPARA	Para;
+	SK_U16		IStatus;	/* Interrupt status read from the XMAC */
+	SK_U16		IStatus2;
+#ifdef SK_SLIM
+    SK_U64      OverflowStatus;
+#endif	
+
+	pPrt = &pAC->GIni.GP[Port];
+	
+	XM_IN16(IoC, Port, XM_ISRC, &IStatus);
+	
+	/* LinkPartner Auto-negable? */
+	if (pPrt->PhyType == SK_PHY_XMAC) {
+		SkXmAutoNegLipaXmac(pAC, IoC, Port, IStatus);
+	}
+	else {
+		/* mask bits that are not used with ext. PHY */
+		IStatus &= ~(XM_IS_LNK_AE | XM_IS_LIPA_RC |
+			XM_IS_RX_PAGE | XM_IS_TX_PAGE |
+			XM_IS_AND | XM_IS_INP_ASS);
+	}
+	
+	SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
+		("XmacIrq Port %d Isr 0x%04X\n", Port, IStatus));
+
+	if (!pPrt->PHWLinkUp) {
+		/* Spurious XMAC interrupt */
+		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
+			("SkXmIrq: spurious interrupt on Port %d\n", Port));
+		return;
+	}
+
+	if ((IStatus & XM_IS_INP_ASS) != 0) {
+		/* Reread ISR Register if link is not in sync */
+		XM_IN16(IoC, Port, XM_ISRC, &IStatus2);
+
+		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
+			("SkXmIrq: Link async. Double check Port %d 0x%04X 0x%04X\n",
+			 Port, IStatus, IStatus2));
+		IStatus &= ~XM_IS_INP_ASS;
+		IStatus |= IStatus2;
+	}
+
+	if ((IStatus & XM_IS_LNK_AE) != 0) {
+		/* not used, GP0 is used instead */
+	}
+
+	if ((IStatus & XM_IS_TX_ABORT) != 0) {
+		/* not used */
+	}
+
+	if ((IStatus & XM_IS_FRC_INT) != 0) {
+		/* not used, use ASIC IRQ instead if needed */
+	}
+
+	if ((IStatus & (XM_IS_INP_ASS | XM_IS_LIPA_RC | XM_IS_RX_PAGE)) != 0) {
+		SkHWLinkDown(pAC, IoC, Port);
+
+		/* Signal to RLMT */
+		Para.Para32[0] = (SK_U32)Port;
+		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para);
+
+		/* Start workaround Errata #2 timer */
+		SkTimerStart(pAC, IoC, &pPrt->PWaTimer, SK_WA_INA_TIME,
+			SKGE_HWAC, SK_HWEV_WATIM, Para);
+	}
+
+	if ((IStatus & XM_IS_RX_PAGE) != 0) {
+		/* not used */
+	}
+
+	if ((IStatus & XM_IS_TX_PAGE) != 0) {
+		/* not used */
+	}
+
+	if ((IStatus & XM_IS_AND) != 0) {
+		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
+			("SkXmIrq: AND on link that is up Port %d\n", Port));
+	}
+
+	if ((IStatus & XM_IS_TSC_OV) != 0) {
+		/* not used */
+	}
+
+	/* Combined Tx & Rx Counter Overflow SIRQ Event */
+	if ((IStatus & (XM_IS_RXC_OV | XM_IS_TXC_OV)) != 0) {
+#ifdef SK_SLIM
+		SkXmOverflowStatus(pAC, IoC, Port, IStatus, &OverflowStatus);
+#else
+		Para.Para32[0] = (SK_U32)Port;
+		Para.Para32[1] = (SK_U32)IStatus;
+		SkPnmiEvent(pAC, IoC, SK_PNMI_EVT_SIRQ_OVERFLOW, Para);
+#endif /* SK_SLIM */
+	}
+
+	if ((IStatus & XM_IS_RXF_OV) != 0) {
+		/* normal situation -> no effect */
+#ifdef DEBUG
+		pPrt->PRxOverCnt++;
+#endif /* DEBUG */
+	}
+
+	if ((IStatus & XM_IS_TXF_UR) != 0) {
+		/* may NOT happen -> error log */
+		SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E020, SKERR_SIRQ_E020MSG);
+	}
+
+	if ((IStatus & XM_IS_TX_COMP) != 0) {
+		/* not served here */
+	}
+
+	if ((IStatus & XM_IS_RX_COMP) != 0) {
+		/* not served here */
+	}
+}	/* SkXmIrq */
+#endif /* GENESIS */
+
+
+#ifdef YUKON
+/******************************************************************************
+ *
+ *	SkGmIrq() - Interrupt Service Routine
+ *
+ * Description:	services an Interrupt Request of the GMAC
+ *
+ * Note:
+ *
+ * Returns:
+ *	nothing
+ */
+static void SkGmIrq(
+SK_AC	*pAC,		/* adapter context */
+SK_IOC	IoC,		/* IO context */
+int		Port)		/* Port Index (MAC_1 + n) */
+{
+	SK_GEPORT	*pPrt;
+	SK_U8		IStatus;	/* Interrupt status */
+#ifdef SK_SLIM
+    SK_U64      OverflowStatus;
+#else
+	SK_EVPARA	Para;
+#endif	
+
+	pPrt = &pAC->GIni.GP[Port];
+	
+	SK_IN8(IoC, GMAC_IRQ_SRC, &IStatus);
+	
+#ifdef XXX
+	/* LinkPartner Auto-negable? */
+	SkMacAutoNegLipaPhy(pAC, IoC, Port, IStatus);
+#endif /* XXX */
+	
+	SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
+		("GmacIrq Port %d Isr 0x%04X\n", Port, IStatus));
+
+	/* Combined Tx & Rx Counter Overflow SIRQ Event */
+	if (IStatus & (GM_IS_RX_CO_OV | GM_IS_TX_CO_OV)) {
+		/* these IRQs will be cleared by reading GMACs register */
+#ifdef SK_SLIM
+        SkGmOverflowStatus(pAC, IoC, Port, IStatus, &OverflowStatus);
+#else
+		Para.Para32[0] = (SK_U32)Port;
+		Para.Para32[1] = (SK_U32)IStatus;
+		SkPnmiEvent(pAC, IoC, SK_PNMI_EVT_SIRQ_OVERFLOW, Para);
+#endif		
+	}
+
+	if (IStatus & GM_IS_RX_FF_OR) {
+		/* clear GMAC Rx FIFO Overrun IRQ */
+		SK_OUT8(IoC, MR_ADDR(Port, RX_GMF_CTRL_T), (SK_U8)GMF_CLI_RX_FO);
+#ifdef DEBUG
+		pPrt->PRxOverCnt++;
+#endif /* DEBUG */
+	}
+
+	if (IStatus & GM_IS_TX_FF_UR) {
+		/* clear GMAC Tx FIFO Underrun IRQ */
+		SK_OUT8(IoC, MR_ADDR(Port, TX_GMF_CTRL_T), (SK_U8)GMF_CLI_TX_FU);
+		/* may NOT happen -> error log */
+		SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E020, SKERR_SIRQ_E020MSG);
+	}
+
+	if (IStatus & GM_IS_TX_COMPL) {
+		/* not served here */
+	}
+
+	if (IStatus & GM_IS_RX_COMPL) {
+		/* not served here */
+	}
+}	/* SkGmIrq */
+#endif /* YUKON */
+
+
+/******************************************************************************
+ *
+ *	SkMacIrq() - Interrupt Service Routine for MAC
+ *
+ * Description:	calls the Interrupt Service Routine dep. on board type
+ *
+ * Returns:
+ *	nothing
+ */
+void SkMacIrq(
+SK_AC	*pAC,		/* adapter context */
+SK_IOC	IoC,		/* IO context */
+int		Port)		/* Port Index (MAC_1 + n) */
+{
+#ifdef GENESIS
+	if (pAC->GIni.GIGenesis) {
+		/* IRQ from XMAC */
+		SkXmIrq(pAC, IoC, Port);
+	}
+#endif /* GENESIS */
+	
+#ifdef YUKON
+	if (pAC->GIni.GIYukon) {
+		/* IRQ from GMAC */
+		SkGmIrq(pAC, IoC, Port);
+	}
+#endif /* YUKON */
+
+}	/* SkMacIrq */
+
+#endif /* !SK_DIAG */
+
+#ifdef GENESIS
+/******************************************************************************
+ *
+ *	SkXmUpdateStats() - Force the XMAC to output the current statistic
+ *
+ * Description:
+ *	The XMAC holds its statistic internally. To obtain the current
+ *	values a command must be sent so that the statistic data will
+ *	be written to a predefined memory area on the adapter.
+ *
+ * Returns:
+ *	0:  success
+ *	1:  something went wrong
+ */
+int SkXmUpdateStats(
+SK_AC	*pAC,		/* adapter context */
+SK_IOC	IoC,		/* IO context */
+unsigned int Port)	/* Port Index (MAC_1 + n) */
+{
+	SK_GEPORT	*pPrt;
+	SK_U16		StatReg;
+	int			WaitIndex;
+
+	pPrt = &pAC->GIni.GP[Port];
+	WaitIndex = 0;
+
+	/* Send an update command to XMAC specified */
+	XM_OUT16(IoC, Port, XM_STAT_CMD, XM_SC_SNP_TXC | XM_SC_SNP_RXC);
+
+	/*
+	 * It is an auto-clearing register. If the command bits
+	 * went to zero again, the statistics are transferred.
+	 * Normally the command should be executed immediately.
+	 * But just to be sure we execute a loop.
+	 */
+	do {
+
+		XM_IN16(IoC, Port, XM_STAT_CMD, &StatReg);
+		
+		if (++WaitIndex > 10) {
+
+			SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_HWI_E021, SKERR_HWI_E021MSG);
+
+			return(1);
+		}
+	} while ((StatReg & (XM_SC_SNP_TXC | XM_SC_SNP_RXC)) != 0);
+	
+	return(0);
+}	/* SkXmUpdateStats */
+
+
+/******************************************************************************
+ *
+ *	SkXmMacStatistic() - Get XMAC counter value
+ *
+ * Description:
+ *	Gets the 32bit counter value. Except for the octet counters
+ *	the lower 32bit are counted in hardware and the upper 32bit
+ *	must be counted in software by monitoring counter overflow interrupts.
+ *
+ * Returns:
+ *	0:  success
+ *	1:  something went wrong
+ */
+int SkXmMacStatistic(
+SK_AC	*pAC,			/* adapter context */
+SK_IOC	IoC,			/* IO context */
+unsigned int Port,		/* Port Index (MAC_1 + n) */
+SK_U16	StatAddr,		/* MIB counter base address */
+SK_U32	SK_FAR *pVal)	/* ptr to return statistic value */
+{
+	if ((StatAddr < XM_TXF_OK) || (StatAddr > XM_RXF_MAX_SZ)) {
+		
+		SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E022, SKERR_HWI_E022MSG);
+		
+		return(1);
+	}
+	
+	XM_IN32(IoC, Port, StatAddr, pVal);
+
+	return(0);
+}	/* SkXmMacStatistic */
+
+
+/******************************************************************************
+ *
+ *	SkXmResetCounter() - Clear MAC statistic counter
+ *
+ * Description:
+ *	Force the XMAC to clear its statistic counter.
+ *
+ * Returns:
+ *	0:  success
+ *	1:  something went wrong
+ */
+int SkXmResetCounter(
+SK_AC	*pAC,		/* adapter context */
+SK_IOC	IoC,		/* IO context */
+unsigned int Port)	/* Port Index (MAC_1 + n) */
+{
+	XM_OUT16(IoC, Port, XM_STAT_CMD, XM_SC_CLR_RXC | XM_SC_CLR_TXC);
+	/* Clear two times according to Errata #3 */
+	XM_OUT16(IoC, Port, XM_STAT_CMD, XM_SC_CLR_RXC | XM_SC_CLR_TXC);
+
+	return(0);
+}	/* SkXmResetCounter */
+
+
+/******************************************************************************
+ *
+ *	SkXmOverflowStatus() - Gets the status of counter overflow interrupt
+ *
+ * Description:
+ *	Checks the source causing an counter overflow interrupt. On success the
+ *	resulting counter overflow status is written to <pStatus>, whereas the
+ *	upper dword stores the XMAC ReceiveCounterEvent register and the lower
+ *	dword the XMAC TransmitCounterEvent register.
+ *
+ * Note:
+ *	For XMAC the interrupt source is a self-clearing register, so the source
+ *	must be checked only once. SIRQ module does another check to be sure
+ *	that no interrupt get lost during process time.
+ *
+ * Returns:
+ *	0:  success
+ *	1:  something went wrong
+ */
+int SkXmOverflowStatus(
+SK_AC	*pAC,				/* adapter context */
+SK_IOC	IoC,				/* IO context */
+unsigned int Port,			/* Port Index (MAC_1 + n) */
+SK_U16	IStatus,			/* Interupt Status from MAC */
+SK_U64	SK_FAR *pStatus)	/* ptr for return overflow status value */
+{
+	SK_U64	Status;	/* Overflow status */
+	SK_U32	RegVal;
+
+	Status = 0;
+
+	if ((IStatus & XM_IS_RXC_OV) != 0) {
+
+		XM_IN32(IoC, Port, XM_RX_CNT_EV, &RegVal);
+		Status |= (SK_U64)RegVal << 32;
+	}
+	
+	if ((IStatus & XM_IS_TXC_OV) != 0) {
+
+		XM_IN32(IoC, Port, XM_TX_CNT_EV, &RegVal);
+		Status |= (SK_U64)RegVal;
+	}
+
+	*pStatus = Status;
+
+	return(0);
+}	/* SkXmOverflowStatus */
+#endif /* GENESIS */
+
+
+#ifdef YUKON
+/******************************************************************************
+ *
+ *	SkGmUpdateStats() - Force the GMAC to output the current statistic
+ *
+ * Description:
+ *	Empty function for GMAC. Statistic data is accessible in direct way.
+ *
+ * Returns:
+ *	0:  success
+ *	1:  something went wrong
+ */
+int SkGmUpdateStats(
+SK_AC	*pAC,		/* adapter context */
+SK_IOC	IoC,		/* IO context */
+unsigned int Port)	/* Port Index (MAC_1 + n) */
+{
+	return(0);
+}
+
+
+/******************************************************************************
+ *
+ *	SkGmMacStatistic() - Get GMAC counter value
+ *
+ * Description:
+ *	Gets the 32bit counter value. Except for the octet counters
+ *	the lower 32bit are counted in hardware and the upper 32bit
+ *	must be counted in software by monitoring counter overflow interrupts.
+ *
+ * Returns:
+ *	0:  success
+ *	1:  something went wrong
+ */
+int SkGmMacStatistic(
+SK_AC	*pAC,			/* adapter context */
+SK_IOC	IoC,			/* IO context */
+unsigned int Port,		/* Port Index (MAC_1 + n) */
+SK_U16	StatAddr,		/* MIB counter base address */
+SK_U32	SK_FAR *pVal)	/* ptr to return statistic value */
+{
+
+	if ((StatAddr < GM_RXF_UC_OK) || (StatAddr > GM_TXE_FIFO_UR)) {
+		
+		SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E022, SKERR_HWI_E022MSG);
+		
+		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+			("SkGmMacStat: wrong MIB counter 0x%04X\n", StatAddr));
+		return(1);
+	}
+		
+	GM_IN32(IoC, Port, StatAddr, pVal);
+
+	return(0);
+}	/* SkGmMacStatistic */
+
+
+/******************************************************************************
+ *
+ *	SkGmResetCounter() - Clear MAC statistic counter
+ *
+ * Description:
+ *	Force GMAC to clear its statistic counter.
+ *
+ * Returns:
+ *	0:  success
+ *	1:  something went wrong
+ */
+int SkGmResetCounter(
+SK_AC	*pAC,		/* adapter context */
+SK_IOC	IoC,		/* IO context */
+unsigned int Port)	/* Port Index (MAC_1 + n) */
+{
+	SK_U16	Reg;	/* Phy Address Register */
+	SK_U16	Word;
+	int		i;
+
+	GM_IN16(IoC, Port, GM_PHY_ADDR, &Reg);
+
+	/* set MIB Clear Counter Mode */
+	GM_OUT16(IoC, Port, GM_PHY_ADDR, Reg | GM_PAR_MIB_CLR);
+	
+	/* read all MIB Counters with Clear Mode set */
+	for (i = 0; i < GM_MIB_CNT_SIZE; i++) {
+		/* the reset is performed only when the lower 16 bits are read */
+		GM_IN16(IoC, Port, GM_MIB_CNT_BASE + 8*i, &Word);
+	}
+	
+	/* clear MIB Clear Counter Mode */
+	GM_OUT16(IoC, Port, GM_PHY_ADDR, Reg);
+	
+	return(0);
+}	/* SkGmResetCounter */
+
+
+/******************************************************************************
+ *
+ *	SkGmOverflowStatus() - Gets the status of counter overflow interrupt
+ *
+ * Description:
+ *	Checks the source causing an counter overflow interrupt. On success the
+ *	resulting counter overflow status is written to <pStatus>, whereas the
+ *	the following bit coding is used:
+ *	63:56 - unused
+ *	55:48 - TxRx interrupt register bit7:0
+ *	32:47 - Rx interrupt register
+ *	31:24 - unused
+ *	23:16 - TxRx interrupt register bit15:8
+ *	15:0  - Tx interrupt register
+ *
+ * Returns:
+ *	0:  success
+ *	1:  something went wrong
+ */
+int SkGmOverflowStatus(
+SK_AC	*pAC,				/* adapter context */
+SK_IOC	IoC,				/* IO context */
+unsigned int Port,			/* Port Index (MAC_1 + n) */
+SK_U16	IStatus,			/* Interupt Status from MAC */
+SK_U64	SK_FAR *pStatus)	/* ptr for return overflow status value */
+{
+	SK_U64	Status;		/* Overflow status */
+	SK_U16	RegVal;
+
+	Status = 0;
+
+	if ((IStatus & GM_IS_RX_CO_OV) != 0) {
+		/* this register is self-clearing after read */
+		GM_IN16(IoC, Port, GM_RX_IRQ_SRC, &RegVal);
+		Status |= (SK_U64)RegVal << 32;
+	}
+	
+	if ((IStatus & GM_IS_TX_CO_OV) != 0) {
+		/* this register is self-clearing after read */
+		GM_IN16(IoC, Port, GM_TX_IRQ_SRC, &RegVal);
+		Status |= (SK_U64)RegVal;
+	}
+	
+	/* this register is self-clearing after read */
+	GM_IN16(IoC, Port, GM_TR_IRQ_SRC, &RegVal);
+	/* Rx overflow interrupt register bits (LoByte)*/
+	Status |= (SK_U64)((SK_U8)RegVal) << 48;
+	/* Tx overflow interrupt register bits (HiByte)*/
+	Status |= (SK_U64)(RegVal >> 8) << 16;
+
+	*pStatus = Status;
+
+	return(0);
+}	/* SkGmOverflowStatus */
+
+
+#ifndef SK_SLIM
+/******************************************************************************
+ *
+ *	SkGmCableDiagStatus() - Starts / Gets status of cable diagnostic test
+ *
+ * Description:
+ *  starts the cable diagnostic test if 'StartTest' is true
+ *  gets the results if 'StartTest' is true
+ *
+ * NOTE:	this test is meaningful only when link is down
+ *	
+ * Returns:
+ *	0:  success
+ *	1:	no YUKON copper
+ *	2:	test in progress
+ */
+int SkGmCableDiagStatus(
+SK_AC	*pAC,		/* adapter context */
+SK_IOC	IoC,   		/* IO context */
+int		Port,		/* Port Index (MAC_1 + n) */
+SK_BOOL	StartTest)	/* flag for start / get result */
+{
+	int		i;
+	SK_U16	RegVal;
+	SK_GEPORT	*pPrt;
+
+	pPrt = &pAC->GIni.GP[Port];
+
+	if (pPrt->PhyType != SK_PHY_MARV_COPPER) {
+		
+		return(1);
+	}
+
+	if (StartTest) {
+		/* only start the cable test */
+		if ((pPrt->PhyId1 & PHY_I1_REV_MSK) < 4) {
+			/* apply TDR workaround from Marvell */
+			SkGmPhyWrite(pAC, IoC, Port, 29, 0x001e);
+			
+			SkGmPhyWrite(pAC, IoC, Port, 30, 0xcc00);
+			SkGmPhyWrite(pAC, IoC, Port, 30, 0xc800);
+			SkGmPhyWrite(pAC, IoC, Port, 30, 0xc400);
+			SkGmPhyWrite(pAC, IoC, Port, 30, 0xc000);
+			SkGmPhyWrite(pAC, IoC, Port, 30, 0xc100);
+		}
+
+		/* set address to 0 for MDI[0] */
+		SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_EXT_ADR, 0);
+
+		/* Read Cable Diagnostic Reg */
+		SkGmPhyRead(pAC, IoC, Port, PHY_MARV_CABLE_DIAG, &RegVal);
+
+		/* start Cable Diagnostic Test */
+		SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_CABLE_DIAG,
+			(SK_U16)(RegVal | PHY_M_CABD_ENA_TEST));
+	
+		return(0);
+	}
+	
+	/* Read Cable Diagnostic Reg */
+	SkGmPhyRead(pAC, IoC, Port, PHY_MARV_CABLE_DIAG, &RegVal);
+
+	SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
+		("PHY Cable Diag.=0x%04X\n", RegVal));
+
+	if ((RegVal & PHY_M_CABD_ENA_TEST) != 0) {
+		/* test is running */
+		return(2);
+	}
+
+	/* get the test results */
+	for (i = 0; i < 4; i++)  {
+		/* set address to i for MDI[i] */
+		SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_EXT_ADR, (SK_U16)i);
+
+		/* get Cable Diagnostic values */
+		SkGmPhyRead(pAC, IoC, Port, PHY_MARV_CABLE_DIAG, &RegVal);
+
+		pPrt->PMdiPairLen[i] = (SK_U8)(RegVal & PHY_M_CABD_DIST_MSK);
+
+		pPrt->PMdiPairSts[i] = (SK_U8)((RegVal & PHY_M_CABD_STAT_MSK) >> 13);
+	}
+
+	return(0);
+}	/* SkGmCableDiagStatus */
+#endif /* !SK_SLIM */
+#endif /* YUKON */
+
+/* End of file */