IB/mlx4: Handle FW command interface rev 3
Upcoming firmware introduces command interface revision 3, which
changes the way port capabilities are queried and set. Update the
driver to handle both the new and old command interfaces by adding a
new MLX4_FLAG_OLD_PORT_CMDS that it is set after querying the firmware
interface revision and then using the correct interface based on the
setting of the flag.
Signed-off-by: Roland Dreier <rolandd@cisco.com>
diff --git a/drivers/net/mlx4/fw.c b/drivers/net/mlx4/fw.c
index 81fc546..d2b0653 100644
--- a/drivers/net/mlx4/fw.c
+++ b/drivers/net/mlx4/fw.c
@@ -38,7 +38,9 @@
#include "icm.h"
enum {
- MLX4_COMMAND_INTERFACE_REV = 2,
+ MLX4_COMMAND_INTERFACE_MIN_REV = 2,
+ MLX4_COMMAND_INTERFACE_MAX_REV = 3,
+ MLX4_COMMAND_INTERFACE_NEW_PORT_CMDS = 3,
};
extern void __buggy_use_of_MLX4_GET(void);
@@ -107,6 +109,7 @@
u16 size;
u16 stat_rate;
int err;
+ int i;
#define QUERY_DEV_CAP_OUT_SIZE 0x100
#define QUERY_DEV_CAP_MAX_SRQ_SZ_OFFSET 0x10
@@ -176,7 +179,6 @@
err = mlx4_cmd_box(dev, 0, mailbox->dma, 0, 0, MLX4_CMD_QUERY_DEV_CAP,
MLX4_CMD_TIME_CLASS_A);
-
if (err)
goto out;
@@ -216,18 +218,10 @@
dev_cap->max_rdma_global = 1 << (field & 0x3f);
MLX4_GET(field, outbox, QUERY_DEV_CAP_ACK_DELAY_OFFSET);
dev_cap->local_ca_ack_delay = field & 0x1f;
- MLX4_GET(field, outbox, QUERY_DEV_CAP_MTU_WIDTH_OFFSET);
- dev_cap->max_mtu = field >> 4;
- dev_cap->max_port_width = field & 0xf;
MLX4_GET(field, outbox, QUERY_DEV_CAP_VL_PORT_OFFSET);
- dev_cap->max_vl = field >> 4;
dev_cap->num_ports = field & 0xf;
- MLX4_GET(field, outbox, QUERY_DEV_CAP_MAX_GID_OFFSET);
- dev_cap->max_gids = 1 << (field & 0xf);
MLX4_GET(stat_rate, outbox, QUERY_DEV_CAP_RATE_SUPPORT_OFFSET);
dev_cap->stat_rate_support = stat_rate;
- MLX4_GET(field, outbox, QUERY_DEV_CAP_MAX_PKEY_OFFSET);
- dev_cap->max_pkeys = 1 << (field & 0xf);
MLX4_GET(dev_cap->flags, outbox, QUERY_DEV_CAP_FLAGS_OFFSET);
MLX4_GET(field, outbox, QUERY_DEV_CAP_RSVD_UAR_OFFSET);
dev_cap->reserved_uars = field >> 4;
@@ -304,6 +298,42 @@
MLX4_GET(dev_cap->max_icm_sz, outbox,
QUERY_DEV_CAP_MAX_ICM_SZ_OFFSET);
+ if (dev->flags & MLX4_FLAG_OLD_PORT_CMDS) {
+ for (i = 1; i <= dev_cap->num_ports; ++i) {
+ MLX4_GET(field, outbox, QUERY_DEV_CAP_VL_PORT_OFFSET);
+ dev_cap->max_vl[i] = field >> 4;
+ MLX4_GET(field, outbox, QUERY_DEV_CAP_MTU_WIDTH_OFFSET);
+ dev_cap->max_mtu[i] = field >> 4;
+ dev_cap->max_port_width[i] = field & 0xf;
+ MLX4_GET(field, outbox, QUERY_DEV_CAP_MAX_GID_OFFSET);
+ dev_cap->max_gids[i] = 1 << (field & 0xf);
+ MLX4_GET(field, outbox, QUERY_DEV_CAP_MAX_PKEY_OFFSET);
+ dev_cap->max_pkeys[i] = 1 << (field & 0xf);
+ }
+ } else {
+#define QUERY_PORT_MTU_OFFSET 0x01
+#define QUERY_PORT_WIDTH_OFFSET 0x06
+#define QUERY_PORT_MAX_GID_PKEY_OFFSET 0x07
+#define QUERY_PORT_MAX_VL_OFFSET 0x0b
+
+ for (i = 1; i <= dev_cap->num_ports; ++i) {
+ err = mlx4_cmd_box(dev, 0, mailbox->dma, i, 0, MLX4_CMD_QUERY_PORT,
+ MLX4_CMD_TIME_CLASS_B);
+ if (err)
+ goto out;
+
+ MLX4_GET(field, outbox, QUERY_PORT_MTU_OFFSET);
+ dev_cap->max_mtu[i] = field & 0xf;
+ MLX4_GET(field, outbox, QUERY_PORT_WIDTH_OFFSET);
+ dev_cap->max_port_width[i] = field & 0xf;
+ MLX4_GET(field, outbox, QUERY_PORT_MAX_GID_PKEY_OFFSET);
+ dev_cap->max_gids[i] = 1 << (field >> 4);
+ dev_cap->max_pkeys[i] = 1 << (field & 0xf);
+ MLX4_GET(field, outbox, QUERY_PORT_MAX_VL_OFFSET);
+ dev_cap->max_vl[i] = field & 0xf;
+ }
+ }
+
if (dev_cap->bmme_flags & 1)
mlx4_dbg(dev, "Base MM extensions: yes "
"(flags %d, rsvd L_Key %08x)\n",
@@ -338,8 +368,8 @@
mlx4_dbg(dev, "Max CQEs: %d, max WQEs: %d, max SRQ WQEs: %d\n",
dev_cap->max_cq_sz, dev_cap->max_qp_sz, dev_cap->max_srq_sz);
mlx4_dbg(dev, "Local CA ACK delay: %d, max MTU: %d, port width cap: %d\n",
- dev_cap->local_ca_ack_delay, 128 << dev_cap->max_mtu,
- dev_cap->max_port_width);
+ dev_cap->local_ca_ack_delay, 128 << dev_cap->max_mtu[1],
+ dev_cap->max_port_width[1]);
mlx4_dbg(dev, "Max SQ desc size: %d, max SQ S/G: %d\n",
dev_cap->max_sq_desc_sz, dev_cap->max_sq_sg);
mlx4_dbg(dev, "Max RQ desc size: %d, max RQ S/G: %d\n",
@@ -491,7 +521,8 @@
((fw_ver & 0x0000ffffull) << 16);
MLX4_GET(cmd_if_rev, outbox, QUERY_FW_CMD_IF_REV_OFFSET);
- if (cmd_if_rev != MLX4_COMMAND_INTERFACE_REV) {
+ if (cmd_if_rev < MLX4_COMMAND_INTERFACE_MIN_REV ||
+ cmd_if_rev > MLX4_COMMAND_INTERFACE_MAX_REV) {
mlx4_err(dev, "Installed FW has unsupported "
"command interface revision %d.\n",
cmd_if_rev);
@@ -499,12 +530,15 @@
(int) (dev->caps.fw_ver >> 32),
(int) (dev->caps.fw_ver >> 16) & 0xffff,
(int) dev->caps.fw_ver & 0xffff);
- mlx4_err(dev, "This driver version supports only revision %d.\n",
- MLX4_COMMAND_INTERFACE_REV);
+ mlx4_err(dev, "This driver version supports only revisions %d to %d.\n",
+ MLX4_COMMAND_INTERFACE_MIN_REV, MLX4_COMMAND_INTERFACE_MAX_REV);
err = -ENODEV;
goto out;
}
+ if (cmd_if_rev < MLX4_COMMAND_INTERFACE_NEW_PORT_CMDS)
+ dev->flags |= MLX4_FLAG_OLD_PORT_CMDS;
+
MLX4_GET(lg, outbox, QUERY_FW_MAX_CMD_OFFSET);
cmd->max_cmds = 1 << lg;
@@ -708,13 +742,15 @@
return err;
}
-int mlx4_INIT_PORT(struct mlx4_dev *dev, struct mlx4_init_port_param *param, int port)
+int mlx4_INIT_PORT(struct mlx4_dev *dev, int port)
{
struct mlx4_cmd_mailbox *mailbox;
u32 *inbox;
int err;
u32 flags;
+ u16 field;
+ if (dev->flags & MLX4_FLAG_OLD_PORT_CMDS) {
#define INIT_PORT_IN_SIZE 256
#define INIT_PORT_FLAGS_OFFSET 0x00
#define INIT_PORT_FLAG_SIG (1 << 18)
@@ -729,32 +765,32 @@
#define INIT_PORT_NODE_GUID_OFFSET 0x18
#define INIT_PORT_SI_GUID_OFFSET 0x20
- mailbox = mlx4_alloc_cmd_mailbox(dev);
- if (IS_ERR(mailbox))
- return PTR_ERR(mailbox);
- inbox = mailbox->buf;
+ mailbox = mlx4_alloc_cmd_mailbox(dev);
+ if (IS_ERR(mailbox))
+ return PTR_ERR(mailbox);
+ inbox = mailbox->buf;
- memset(inbox, 0, INIT_PORT_IN_SIZE);
+ memset(inbox, 0, INIT_PORT_IN_SIZE);
- flags = 0;
- flags |= param->set_guid0 ? INIT_PORT_FLAG_G0 : 0;
- flags |= param->set_node_guid ? INIT_PORT_FLAG_NG : 0;
- flags |= param->set_si_guid ? INIT_PORT_FLAG_SIG : 0;
- flags |= (param->vl_cap & 0xf) << INIT_PORT_VL_SHIFT;
- flags |= (param->port_width_cap & 0xf) << INIT_PORT_PORT_WIDTH_SHIFT;
- MLX4_PUT(inbox, flags, INIT_PORT_FLAGS_OFFSET);
+ flags = 0;
+ flags |= (dev->caps.vl_cap[port] & 0xf) << INIT_PORT_VL_SHIFT;
+ flags |= (dev->caps.port_width_cap[port] & 0xf) << INIT_PORT_PORT_WIDTH_SHIFT;
+ MLX4_PUT(inbox, flags, INIT_PORT_FLAGS_OFFSET);
- MLX4_PUT(inbox, param->mtu, INIT_PORT_MTU_OFFSET);
- MLX4_PUT(inbox, param->max_gid, INIT_PORT_MAX_GID_OFFSET);
- MLX4_PUT(inbox, param->max_pkey, INIT_PORT_MAX_PKEY_OFFSET);
- MLX4_PUT(inbox, param->guid0, INIT_PORT_GUID0_OFFSET);
- MLX4_PUT(inbox, param->node_guid, INIT_PORT_NODE_GUID_OFFSET);
- MLX4_PUT(inbox, param->si_guid, INIT_PORT_SI_GUID_OFFSET);
+ field = 128 << dev->caps.mtu_cap[port];
+ MLX4_PUT(inbox, field, INIT_PORT_MTU_OFFSET);
+ field = dev->caps.gid_table_len[port];
+ MLX4_PUT(inbox, field, INIT_PORT_MAX_GID_OFFSET);
+ field = dev->caps.pkey_table_len[port];
+ MLX4_PUT(inbox, field, INIT_PORT_MAX_PKEY_OFFSET);
- err = mlx4_cmd(dev, mailbox->dma, port, 0, MLX4_CMD_INIT_PORT,
- MLX4_CMD_TIME_CLASS_A);
+ err = mlx4_cmd(dev, mailbox->dma, port, 0, MLX4_CMD_INIT_PORT,
+ MLX4_CMD_TIME_CLASS_A);
- mlx4_free_cmd_mailbox(dev, mailbox);
+ mlx4_free_cmd_mailbox(dev, mailbox);
+ } else
+ err = mlx4_cmd(dev, 0, port, 0, MLX4_CMD_INIT_PORT,
+ MLX4_CMD_TIME_CLASS_A);
return err;
}