[PATCH] bnx2: add 5708 support
Add 5708 copper and serdes basic support, including 2.5 Gbps support
on 5708 serdes. SPEED_2500 is also added to ethtool.h
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index 11d2523..671393a 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -41,6 +41,8 @@
NC370I,
BCM5706S,
NC370F,
+ BCM5708,
+ BCM5708S,
} board_t;
/* indexed by board_t, above */
@@ -52,6 +54,8 @@
{ "HP NC370i Multifunction Gigabit Server Adapter" },
{ "Broadcom NetXtreme II BCM5706 1000Base-SX" },
{ "HP NC370F Multifunction Gigabit Server Adapter" },
+ { "Broadcom NetXtreme II BCM5708 1000Base-T" },
+ { "Broadcom NetXtreme II BCM5708 1000Base-SX" },
};
static struct pci_device_id bnx2_pci_tbl[] = {
@@ -61,10 +65,14 @@
PCI_VENDOR_ID_HP, 0x3106, 0, 0, NC370I },
{ PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_NX2_5706,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, BCM5706 },
+ { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_NX2_5708,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, BCM5708 },
{ PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_NX2_5706S,
PCI_VENDOR_ID_HP, 0x3102, 0, 0, NC370F },
{ PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_NX2_5706S,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, BCM5706S },
+ { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_NX2_5708S,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, BCM5708S },
{ 0, }
};
@@ -430,6 +438,18 @@
return;
}
+ if ((bp->phy_flags & PHY_SERDES_FLAG) &&
+ (CHIP_NUM(bp) == CHIP_NUM_5708)) {
+ u32 val;
+
+ bnx2_read_phy(bp, BCM5708S_1000X_STAT1, &val);
+ if (val & BCM5708S_1000X_STAT1_TX_PAUSE)
+ bp->flow_ctrl |= FLOW_CTRL_TX;
+ if (val & BCM5708S_1000X_STAT1_RX_PAUSE)
+ bp->flow_ctrl |= FLOW_CTRL_RX;
+ return;
+ }
+
bnx2_read_phy(bp, MII_ADVERTISE, &local_adv);
bnx2_read_phy(bp, MII_LPA, &remote_adv);
@@ -476,7 +496,36 @@
}
static int
-bnx2_serdes_linkup(struct bnx2 *bp)
+bnx2_5708s_linkup(struct bnx2 *bp)
+{
+ u32 val;
+
+ bp->link_up = 1;
+ bnx2_read_phy(bp, BCM5708S_1000X_STAT1, &val);
+ switch (val & BCM5708S_1000X_STAT1_SPEED_MASK) {
+ case BCM5708S_1000X_STAT1_SPEED_10:
+ bp->line_speed = SPEED_10;
+ break;
+ case BCM5708S_1000X_STAT1_SPEED_100:
+ bp->line_speed = SPEED_100;
+ break;
+ case BCM5708S_1000X_STAT1_SPEED_1G:
+ bp->line_speed = SPEED_1000;
+ break;
+ case BCM5708S_1000X_STAT1_SPEED_2G5:
+ bp->line_speed = SPEED_2500;
+ break;
+ }
+ if (val & BCM5708S_1000X_STAT1_FD)
+ bp->duplex = DUPLEX_FULL;
+ else
+ bp->duplex = DUPLEX_HALF;
+
+ return 0;
+}
+
+static int
+bnx2_5706s_linkup(struct bnx2 *bp)
{
u32 bmcr, local_adv, remote_adv, common;
@@ -593,13 +642,27 @@
val = REG_RD(bp, BNX2_EMAC_MODE);
val &= ~(BNX2_EMAC_MODE_PORT | BNX2_EMAC_MODE_HALF_DUPLEX |
- BNX2_EMAC_MODE_MAC_LOOP | BNX2_EMAC_MODE_FORCE_LINK);
+ BNX2_EMAC_MODE_MAC_LOOP | BNX2_EMAC_MODE_FORCE_LINK |
+ BNX2_EMAC_MODE_25G);
if (bp->link_up) {
- if (bp->line_speed != SPEED_1000)
- val |= BNX2_EMAC_MODE_PORT_MII;
- else
- val |= BNX2_EMAC_MODE_PORT_GMII;
+ switch (bp->line_speed) {
+ case SPEED_10:
+ if (CHIP_NUM(bp) == CHIP_NUM_5708) {
+ val |= BNX2_EMAC_MODE_PORT_MII_10;
+ break;
+ }
+ /* fall through */
+ case SPEED_100:
+ val |= BNX2_EMAC_MODE_PORT_MII;
+ break;
+ case SPEED_2500:
+ val |= BNX2_EMAC_MODE_25G;
+ /* fall through */
+ case SPEED_1000:
+ val |= BNX2_EMAC_MODE_PORT_GMII;
+ break;
+ }
}
else {
val |= BNX2_EMAC_MODE_PORT_GMII;
@@ -662,7 +725,10 @@
bp->link_up = 1;
if (bp->phy_flags & PHY_SERDES_FLAG) {
- bnx2_serdes_linkup(bp);
+ if (CHIP_NUM(bp) == CHIP_NUM_5706)
+ bnx2_5706s_linkup(bp);
+ else if (CHIP_NUM(bp) == CHIP_NUM_5708)
+ bnx2_5708s_linkup(bp);
}
else {
bnx2_copper_linkup(bp);
@@ -755,39 +821,61 @@
static int
bnx2_setup_serdes_phy(struct bnx2 *bp)
{
- u32 adv, bmcr;
+ u32 adv, bmcr, up1;
u32 new_adv = 0;
if (!(bp->autoneg & AUTONEG_SPEED)) {
u32 new_bmcr;
+ int force_link_down = 0;
+
+ if (CHIP_NUM(bp) == CHIP_NUM_5708) {
+ bnx2_read_phy(bp, BCM5708S_UP1, &up1);
+ if (up1 & BCM5708S_UP1_2G5) {
+ up1 &= ~BCM5708S_UP1_2G5;
+ bnx2_write_phy(bp, BCM5708S_UP1, up1);
+ force_link_down = 1;
+ }
+ }
+
+ bnx2_read_phy(bp, MII_ADVERTISE, &adv);
+ adv &= ~(ADVERTISE_1000XFULL | ADVERTISE_1000XHALF);
bnx2_read_phy(bp, MII_BMCR, &bmcr);
new_bmcr = bmcr & ~BMCR_ANENABLE;
new_bmcr |= BMCR_SPEED1000;
if (bp->req_duplex == DUPLEX_FULL) {
+ adv |= ADVERTISE_1000XFULL;
new_bmcr |= BMCR_FULLDPLX;
}
else {
+ adv |= ADVERTISE_1000XHALF;
new_bmcr &= ~BMCR_FULLDPLX;
}
- if (new_bmcr != bmcr) {
+ if ((new_bmcr != bmcr) || (force_link_down)) {
/* Force a link down visible on the other side */
if (bp->link_up) {
- bnx2_read_phy(bp, MII_ADVERTISE, &adv);
- adv &= ~(ADVERTISE_1000XFULL |
- ADVERTISE_1000XHALF);
- bnx2_write_phy(bp, MII_ADVERTISE, adv);
+ bnx2_write_phy(bp, MII_ADVERTISE, adv &
+ ~(ADVERTISE_1000XFULL |
+ ADVERTISE_1000XHALF));
bnx2_write_phy(bp, MII_BMCR, bmcr |
BMCR_ANRESTART | BMCR_ANENABLE);
bp->link_up = 0;
netif_carrier_off(bp->dev);
+ bnx2_write_phy(bp, MII_BMCR, new_bmcr);
}
+ bnx2_write_phy(bp, MII_ADVERTISE, adv);
bnx2_write_phy(bp, MII_BMCR, new_bmcr);
}
return 0;
}
+ if (bp->phy_flags & PHY_2_5G_CAPABLE_FLAG) {
+ bnx2_read_phy(bp, BCM5708S_UP1, &up1);
+ up1 |= BCM5708S_UP1_2G5;
+ bnx2_write_phy(bp, BCM5708S_UP1, up1);
+ }
+
if (bp->advertising & ADVERTISED_1000baseT_Full)
new_adv |= ADVERTISE_1000XFULL;
@@ -952,7 +1040,60 @@
}
static int
-bnx2_init_serdes_phy(struct bnx2 *bp)
+bnx2_init_5708s_phy(struct bnx2 *bp)
+{
+ u32 val;
+
+ bnx2_write_phy(bp, BCM5708S_BLK_ADDR, BCM5708S_BLK_ADDR_DIG3);
+ bnx2_write_phy(bp, BCM5708S_DIG_3_0, BCM5708S_DIG_3_0_USE_IEEE);
+ bnx2_write_phy(bp, BCM5708S_BLK_ADDR, BCM5708S_BLK_ADDR_DIG);
+
+ bnx2_read_phy(bp, BCM5708S_1000X_CTL1, &val);
+ val |= BCM5708S_1000X_CTL1_FIBER_MODE | BCM5708S_1000X_CTL1_AUTODET_EN;
+ bnx2_write_phy(bp, BCM5708S_1000X_CTL1, val);
+
+ bnx2_read_phy(bp, BCM5708S_1000X_CTL2, &val);
+ val |= BCM5708S_1000X_CTL2_PLLEL_DET_EN;
+ bnx2_write_phy(bp, BCM5708S_1000X_CTL2, val);
+
+ if (bp->phy_flags & PHY_2_5G_CAPABLE_FLAG) {
+ bnx2_read_phy(bp, BCM5708S_UP1, &val);
+ val |= BCM5708S_UP1_2G5;
+ bnx2_write_phy(bp, BCM5708S_UP1, val);
+ }
+
+ if ((CHIP_ID(bp) == CHIP_ID_5708_A0) ||
+ (CHIP_ID(bp) == CHIP_ID_5708_B0)) {
+ /* increase tx signal amplitude */
+ bnx2_write_phy(bp, BCM5708S_BLK_ADDR,
+ BCM5708S_BLK_ADDR_TX_MISC);
+ bnx2_read_phy(bp, BCM5708S_TX_ACTL1, &val);
+ val &= ~BCM5708S_TX_ACTL1_DRIVER_VCM;
+ bnx2_write_phy(bp, BCM5708S_TX_ACTL1, val);
+ bnx2_write_phy(bp, BCM5708S_BLK_ADDR, BCM5708S_BLK_ADDR_DIG);
+ }
+
+ val = REG_RD_IND(bp, HOST_VIEW_SHMEM_BASE + BNX2_PORT_HW_CFG_CONFIG) &
+ BNX2_PORT_HW_CFG_CFG_TXCTL3_MASK;
+
+ if (val) {
+ u32 is_backplane;
+
+ is_backplane = REG_RD_IND(bp, HOST_VIEW_SHMEM_BASE +
+ BNX2_SHARED_HW_CFG_CONFIG);
+ if (is_backplane & BNX2_SHARED_HW_CFG_PHY_BACKPLANE) {
+ bnx2_write_phy(bp, BCM5708S_BLK_ADDR,
+ BCM5708S_BLK_ADDR_TX_MISC);
+ bnx2_write_phy(bp, BCM5708S_TX_ACTL3, val);
+ bnx2_write_phy(bp, BCM5708S_BLK_ADDR,
+ BCM5708S_BLK_ADDR_DIG);
+ }
+ }
+ return 0;
+}
+
+static int
+bnx2_init_5706s_phy(struct bnx2 *bp)
{
bp->phy_flags &= ~PHY_PARALLEL_DETECT_FLAG;
@@ -990,6 +1131,8 @@
static int
bnx2_init_copper_phy(struct bnx2 *bp)
{
+ u32 val;
+
bp->phy_flags |= PHY_CRC_FIX_FLAG;
if (bp->phy_flags & PHY_CRC_FIX_FLAG) {
@@ -1004,8 +1147,6 @@
}
if (bp->dev->mtu > 1500) {
- u32 val;
-
/* Set extended packet length bit */
bnx2_write_phy(bp, 0x18, 0x7);
bnx2_read_phy(bp, 0x18, &val);
@@ -1015,8 +1156,6 @@
bnx2_write_phy(bp, 0x10, val | 0x1);
}
else {
- u32 val;
-
bnx2_write_phy(bp, 0x18, 0x7);
bnx2_read_phy(bp, 0x18, &val);
bnx2_write_phy(bp, 0x18, val & ~0x4007);
@@ -1025,6 +1164,10 @@
bnx2_write_phy(bp, 0x10, val & ~0x1);
}
+ /* ethernet@wirespeed */
+ bnx2_write_phy(bp, 0x18, 0x7007);
+ bnx2_read_phy(bp, 0x18, &val);
+ bnx2_write_phy(bp, 0x18, val | (1 << 15) | (1 << 4));
return 0;
}
@@ -1048,7 +1191,10 @@
bp->phy_id |= val & 0xffff;
if (bp->phy_flags & PHY_SERDES_FLAG) {
- rc = bnx2_init_serdes_phy(bp);
+ if (CHIP_NUM(bp) == CHIP_NUM_5706)
+ rc = bnx2_init_5706s_phy(bp);
+ else if (CHIP_NUM(bp) == CHIP_NUM_5708)
+ rc = bnx2_init_5708s_phy(bp);
}
else {
rc = bnx2_init_copper_phy(bp);
@@ -3234,7 +3380,7 @@
{ 0x1408, 0, 0x01c00800, 0x00000000 },
{ 0x149c, 0, 0x8000ffff, 0x00000000 },
{ 0x14a8, 0, 0x00000000, 0x000001ff },
- { 0x14ac, 0, 0x4fffffff, 0x10000000 },
+ { 0x14ac, 0, 0x0fffffff, 0x10000000 },
{ 0x14b0, 0, 0x00000002, 0x00000001 },
{ 0x14b8, 0, 0x00000000, 0x00000000 },
{ 0x14c0, 0, 0x00000000, 0x00000009 },
@@ -3577,7 +3723,7 @@
u32 len;
} mem_tbl[] = {
{ 0x60000, 0x4000 },
- { 0xa0000, 0x4000 },
+ { 0xa0000, 0x3000 },
{ 0xe0000, 0x4000 },
{ 0x120000, 0x4000 },
{ 0x1a0000, 0x4000 },
@@ -4264,7 +4410,8 @@
(unsigned long) (stats_blk->stat_Dot3StatsExcessiveCollisions +
stats_blk->stat_Dot3StatsLateCollisions);
- if (CHIP_NUM(bp) == CHIP_NUM_5706)
+ if ((CHIP_NUM(bp) == CHIP_NUM_5706) ||
+ (CHIP_ID(bp) == CHIP_ID_5708_A0))
net_stats->tx_carrier_errors = 0;
else {
net_stats->tx_carrier_errors =
@@ -4814,6 +4961,14 @@
4,4,4,4,4,
};
+static u8 bnx2_5708_stats_len_arr[BNX2_NUM_STATS] = {
+ 8,0,8,8,8,8,8,8,8,8,
+ 4,4,4,4,4,4,4,4,4,4,
+ 4,4,4,4,4,4,4,4,4,4,
+ 4,4,4,4,4,4,4,4,4,4,
+ 4,4,4,4,4,
+};
+
#define BNX2_NUM_TESTS 6
static struct {
@@ -4922,8 +5077,13 @@
return;
}
- if (CHIP_NUM(bp) == CHIP_NUM_5706)
+ if ((CHIP_ID(bp) == CHIP_ID_5706_A0) ||
+ (CHIP_ID(bp) == CHIP_ID_5706_A1) ||
+ (CHIP_ID(bp) == CHIP_ID_5706_A2) ||
+ (CHIP_ID(bp) == CHIP_ID_5708_A0))
stats_len_arr = bnx2_5706_stats_len_arr;
+ else
+ stats_len_arr = bnx2_5708_stats_len_arr;
for (i = 0; i < BNX2_NUM_STATS; i++) {
if (stats_len_arr[i] == 0) {
@@ -5205,8 +5365,6 @@
bp->chip_id = REG_RD(bp, BNX2_MISC_ID);
- bp->phy_addr = 1;
-
/* Get bus information. */
reg = REG_RD(bp, BNX2_PCICFG_MISC_STATUS);
if (reg & BNX2_PCICFG_MISC_STATUS_PCIX_DET) {
@@ -5316,10 +5474,19 @@
bp->timer_interval = HZ;
bp->current_interval = HZ;
+ bp->phy_addr = 1;
+
/* Disable WOL support if we are running on a SERDES chip. */
if (CHIP_BOND_ID(bp) & CHIP_BOND_ID_SERDES_BIT) {
bp->phy_flags |= PHY_SERDES_FLAG;
bp->flags |= NO_WOL_FLAG;
+ if (CHIP_NUM(bp) == CHIP_NUM_5708) {
+ bp->phy_addr = 2;
+ reg = REG_RD_IND(bp, HOST_VIEW_SHMEM_BASE +
+ BNX2_SHARED_HW_CFG_CONFIG);
+ if (reg & BNX2_SHARED_HW_CFG_PHY_2_5G)
+ bp->phy_flags |= PHY_2_5G_CAPABLE_FLAG;
+ }
}
if (CHIP_ID(bp) == CHIP_ID_5706_A0) {
diff --git a/drivers/net/bnx2.h b/drivers/net/bnx2.h
index 62857b6..c0e88f8 100644
--- a/drivers/net/bnx2.h
+++ b/drivers/net/bnx2.h
@@ -1449,8 +1449,9 @@
#define BNX2_EMAC_MODE_PORT_NONE (0L<<2)
#define BNX2_EMAC_MODE_PORT_MII (1L<<2)
#define BNX2_EMAC_MODE_PORT_GMII (2L<<2)
-#define BNX2_EMAC_MODE_PORT_UNDEF (3L<<2)
+#define BNX2_EMAC_MODE_PORT_MII_10 (3L<<2)
#define BNX2_EMAC_MODE_MAC_LOOP (1L<<4)
+#define BNX2_EMAC_MODE_25G (1L<<5)
#define BNX2_EMAC_MODE_TAGGED_MAC_CTL (1L<<7)
#define BNX2_EMAC_MODE_TX_BURST (1L<<8)
#define BNX2_EMAC_MODE_MAX_DEFER_DROP_ENA (1L<<9)
@@ -3724,6 +3725,53 @@
#define PHY_ID(id) ((id) & 0xfffffff0)
#define PHY_REV_ID(id) ((id) & 0xf)
+/* 5708 Serdes PHY registers */
+
+#define BCM5708S_UP1 0xb
+
+#define BCM5708S_UP1_2G5 0x1
+
+#define BCM5708S_BLK_ADDR 0x1f
+
+#define BCM5708S_BLK_ADDR_DIG 0x0000
+#define BCM5708S_BLK_ADDR_DIG3 0x0002
+#define BCM5708S_BLK_ADDR_TX_MISC 0x0005
+
+/* Digital Block */
+#define BCM5708S_1000X_CTL1 0x10
+
+#define BCM5708S_1000X_CTL1_FIBER_MODE 0x0001
+#define BCM5708S_1000X_CTL1_AUTODET_EN 0x0010
+
+#define BCM5708S_1000X_CTL2 0x11
+
+#define BCM5708S_1000X_CTL2_PLLEL_DET_EN 0x0001
+
+#define BCM5708S_1000X_STAT1 0x14
+
+#define BCM5708S_1000X_STAT1_SGMII 0x0001
+#define BCM5708S_1000X_STAT1_LINK 0x0002
+#define BCM5708S_1000X_STAT1_FD 0x0004
+#define BCM5708S_1000X_STAT1_SPEED_MASK 0x0018
+#define BCM5708S_1000X_STAT1_SPEED_10 0x0000
+#define BCM5708S_1000X_STAT1_SPEED_100 0x0008
+#define BCM5708S_1000X_STAT1_SPEED_1G 0x0010
+#define BCM5708S_1000X_STAT1_SPEED_2G5 0x0018
+#define BCM5708S_1000X_STAT1_TX_PAUSE 0x0020
+#define BCM5708S_1000X_STAT1_RX_PAUSE 0x0040
+
+/* Digital3 Block */
+#define BCM5708S_DIG_3_0 0x10
+
+#define BCM5708S_DIG_3_0_USE_IEEE 0x0001
+
+/* Tx/Misc Block */
+#define BCM5708S_TX_ACTL1 0x15
+
+#define BCM5708S_TX_ACTL1_DRIVER_VCM 0x30
+
+#define BCM5708S_TX_ACTL3 0x17
+
#define MIN_ETHERNET_PACKET_SIZE 60
#define MAX_ETHERNET_PACKET_SIZE 1514
#define MAX_ETHERNET_JUMBO_PACKET_SIZE 9014
@@ -3893,6 +3941,7 @@
#define PHY_SERDES_FLAG 1
#define PHY_CRC_FIX_FLAG 2
#define PHY_PARALLEL_DETECT_FLAG 4
+#define PHY_2_5G_CAPABLE_FLAG 8
#define PHY_INT_MODE_MASK_FLAG 0x300
#define PHY_INT_MODE_AUTO_POLLING_FLAG 0x100
#define PHY_INT_MODE_LINK_READY_FLAG 0x200
@@ -3901,6 +3950,7 @@
/* chip num:16-31, rev:12-15, metal:4-11, bond_id:0-3 */
#define CHIP_NUM(bp) (((bp)->chip_id) & 0xffff0000)
#define CHIP_NUM_5706 0x57060000
+#define CHIP_NUM_5708 0x57080000
#define CHIP_REV(bp) (((bp)->chip_id) & 0x0000f000)
#define CHIP_REV_Ax 0x00000000
@@ -3913,6 +3963,9 @@
#define CHIP_ID(bp) (((bp)->chip_id) & 0xfffffff0)
#define CHIP_ID_5706_A0 0x57060000
#define CHIP_ID_5706_A1 0x57060010
+#define CHIP_ID_5706_A2 0x57060020
+#define CHIP_ID_5708_A0 0x57080000
+#define CHIP_ID_5708_B0 0x57081000
#define CHIP_BOND_ID(bp) (((bp)->chip_id) & 0xf)
@@ -4132,12 +4185,12 @@
#define BNX2_LINK_STATUS 0x0000000c
#define BNX2_DRV_PULSE_MB 0x00000010
-#define BNX2_DRV_PULSE_SEQ_MASK 0x0000ffff
+#define BNX2_DRV_PULSE_SEQ_MASK 0x00007fff
/* Indicate to the firmware not to go into the
* OS absent when it is not getting driver pulse.
* This is used for debugging. */
-#define BNX2_DRV_MSG_DATA_PULSE_CODE_ALWAYS_ALIVE 0x00010000
+#define BNX2_DRV_MSG_DATA_PULSE_CODE_ALWAYS_ALIVE 0x00080000
#define BNX2_DEV_INFO_SIGNATURE 0x00000020
#define BNX2_DEV_INFO_SIGNATURE_MAGIC 0x44564900
@@ -4160,6 +4213,8 @@
#define BNX2_SHARED_HW_CFG_DESIGN_LOM 0x1
#define BNX2_SHARED_HW_CFG_PHY_COPPER 0
#define BNX2_SHARED_HW_CFG_PHY_FIBER 0x2
+#define BNX2_SHARED_HW_CFG_PHY_2_5G 0x20
+#define BNX2_SHARED_HW_CFG_PHY_BACKPLANE 0x40
#define BNX2_SHARED_HW_CFG_LED_MODE_SHIFT_BITS 8
#define BNX2_SHARED_HW_CFG_LED_MODE_MASK 0x300
#define BNX2_SHARED_HW_CFG_LED_MODE_MAC 0
@@ -4173,9 +4228,11 @@
#define BNX2_PORT_HW_CFG_MAC_LOWER 0x00000054
#define BNX2_PORT_HW_CFG_CONFIG 0x00000058
+#define BNX2_PORT_HW_CFG_CFG_TXCTL3_MASK 0x0000ffff
#define BNX2_PORT_HW_CFG_CFG_DFLT_LINK_MASK 0x001f0000
#define BNX2_PORT_HW_CFG_CFG_DFLT_LINK_AN 0x00000000
#define BNX2_PORT_HW_CFG_CFG_DFLT_LINK_1G 0x00030000
+#define BNX2_PORT_HW_CFG_CFG_DFLT_LINK_2_5G 0x00040000
#define BNX2_PORT_HW_CFG_IMD_MAC_A_UPPER 0x00000068
#define BNX2_PORT_HW_CFG_IMD_MAC_A_LOWER 0x0000006c
diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h
index d2c390e..93535f0 100644
--- a/include/linux/ethtool.h
+++ b/include/linux/ethtool.h
@@ -453,10 +453,11 @@
* it was foced up into this mode or autonegotiated.
*/
-/* The forced speed, 10Mb, 100Mb, gigabit, 10GbE. */
+/* The forced speed, 10Mb, 100Mb, gigabit, 2.5Gb, 10GbE. */
#define SPEED_10 10
#define SPEED_100 100
#define SPEED_1000 1000
+#define SPEED_2500 2500
#define SPEED_10000 10000
/* Duplex, half or full. */
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 88de3f8..8cadfde 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -1785,6 +1785,7 @@
#define PCI_DEVICE_ID_TIGON3_5704 0x1648
#define PCI_DEVICE_ID_TIGON3_5704S_2 0x1649
#define PCI_DEVICE_ID_NX2_5706 0x164a
+#define PCI_DEVICE_ID_NX2_5708 0x164c
#define PCI_DEVICE_ID_TIGON3_5702FE 0x164d
#define PCI_DEVICE_ID_TIGON3_5705 0x1653
#define PCI_DEVICE_ID_TIGON3_5705_2 0x1654
@@ -1809,6 +1810,7 @@
#define PCI_DEVICE_ID_TIGON3_5703X 0x16a7
#define PCI_DEVICE_ID_TIGON3_5704S 0x16a8
#define PCI_DEVICE_ID_NX2_5706S 0x16aa
+#define PCI_DEVICE_ID_NX2_5708S 0x16ac
#define PCI_DEVICE_ID_TIGON3_5702A3 0x16c6
#define PCI_DEVICE_ID_TIGON3_5703A3 0x16c7
#define PCI_DEVICE_ID_TIGON3_5781 0x16dd