| config ARCH_OMAP |
| bool |
| |
| config ARCH_OMAP2 |
| bool "TI OMAP2" |
| depends on ARCH_MULTI_V6 |
| select ARCH_OMAP2PLUS |
| select CPU_V6 |
| select MULTI_IRQ_HANDLER |
| select SOC_HAS_OMAP2_SDRC |
| select COMMON_CLK |
| |
| config ARCH_OMAP3 |
| bool "TI OMAP3" |
| depends on ARCH_MULTI_V7 |
| select ARCH_OMAP2PLUS |
| select ARCH_HAS_OPP |
| select ARM_CPU_SUSPEND if PM |
| select CPU_V7 |
| select MULTI_IRQ_HANDLER |
| select OMAP_INTERCONNECT |
| select PM_OPP if PM |
| select PM_RUNTIME if CPU_IDLE |
| select SOC_HAS_OMAP2_SDRC |
| select COMMON_CLK |
| select USB_ARCH_HAS_EHCI if USB_SUPPORT |
| |
| config ARCH_OMAP4 |
| bool "TI OMAP4" |
| depends on ARCH_MULTI_V7 |
| select ARCH_OMAP2PLUS |
| select ARCH_HAS_OPP |
| select ARCH_NEEDS_CPU_IDLE_COUPLED if SMP |
| select ARM_CPU_SUSPEND if PM |
| select ARM_ERRATA_720789 |
| select ARM_GIC |
| select CACHE_L2X0 |
| select CPU_V7 |
| select HAVE_ARM_SCU if SMP |
| select HAVE_ARM_TWD if LOCAL_TIMERS |
| select HAVE_SMP |
| select LOCAL_TIMERS if SMP |
| select OMAP_INTERCONNECT |
| select PL310_ERRATA_588369 |
| select PL310_ERRATA_727915 |
| select PM_OPP if PM |
| select PM_RUNTIME if CPU_IDLE |
| select USB_ARCH_HAS_EHCI if USB_SUPPORT |
| select COMMON_CLK |
| select ARM_ERRATA_754322 |
| select ARM_ERRATA_775420 |
| |
| config SOC_OMAP5 |
| bool "TI OMAP5" |
| depends on ARCH_MULTI_V7 |
| select ARCH_OMAP2PLUS |
| select ARM_CPU_SUSPEND if PM |
| select ARM_GIC |
| select CPU_V7 |
| select HAVE_ARM_SCU if SMP |
| select HAVE_ARM_TWD if LOCAL_TIMERS |
| select HAVE_SMP |
| select COMMON_CLK |
| select HAVE_ARM_ARCH_TIMER |
| select ARM_ERRATA_798181 |
| |
| config SOC_AM33XX |
| bool "AM33XX support" |
| depends on ARCH_MULTI_V7 |
| select ARCH_OMAP2PLUS |
| select ARM_CPU_SUSPEND if PM |
| select CPU_V7 |
| select MULTI_IRQ_HANDLER |
| select COMMON_CLK |
| |
| config SOC_AM43XX |
| bool "TI AM43x" |
| depends on ARCH_MULTI_V7 |
| select CPU_V7 |
| select ARCH_OMAP2PLUS |
| select MULTI_IRQ_HANDLER |
| select ARM_GIC |
| select COMMON_CLK |
| select MACH_OMAP_GENERIC |
| |
| config ARCH_OMAP2PLUS |
| bool |
| select ARCH_HAS_BANDGAP |
| select ARCH_HAS_CPUFREQ |
| select ARCH_HAS_HOLES_MEMORYMODEL |
| select ARCH_OMAP |
| select ARCH_REQUIRE_GPIOLIB |
| select CLKDEV_LOOKUP |
| select CLKSRC_MMIO |
| select GENERIC_CLOCKEVENTS |
| select GENERIC_IRQ_CHIP |
| select HAVE_CLK |
| select OMAP_DM_TIMER |
| select PINCTRL |
| select PROC_DEVICETREE if PROC_FS |
| select SOC_BUS |
| select SPARSE_IRQ |
| select TI_PRIV_EDMA |
| select USE_OF |
| help |
| Systems based on OMAP2, OMAP3, OMAP4 or OMAP5 |
| |
| |
| if ARCH_OMAP2PLUS |
| |
| menu "TI OMAP2/3/4 Specific Features" |
| |
| config ARCH_OMAP2PLUS_TYPICAL |
| bool "Typical OMAP configuration" |
| default y |
| select AEABI |
| select HIGHMEM |
| select I2C |
| select I2C_OMAP |
| select MENELAUS if ARCH_OMAP2 |
| select NEON if ARCH_OMAP3 || ARCH_OMAP4 || SOC_OMAP5 |
| select PM_RUNTIME |
| select REGULATOR |
| select TWL4030_CORE if ARCH_OMAP3 || ARCH_OMAP4 |
| select TWL4030_POWER if ARCH_OMAP3 || ARCH_OMAP4 |
| select VFP |
| help |
| Compile a kernel suitable for booting most boards |
| |
| config SOC_HAS_OMAP2_SDRC |
| bool "OMAP2 SDRAM Controller support" |
| |
| config SOC_HAS_REALTIME_COUNTER |
| bool "Real time free running counter" |
| depends on SOC_OMAP5 |
| default y |
| |
| comment "OMAP Core Type" |
| depends on ARCH_OMAP2 |
| |
| config SOC_OMAP2420 |
| bool "OMAP2420 support" |
| depends on ARCH_OMAP2 |
| default y |
| select OMAP_DM_TIMER |
| select SOC_HAS_OMAP2_SDRC |
| |
| config SOC_OMAP2430 |
| bool "OMAP2430 support" |
| depends on ARCH_OMAP2 |
| default y |
| select SOC_HAS_OMAP2_SDRC |
| |
| config SOC_OMAP3430 |
| bool "OMAP3430 support" |
| depends on ARCH_OMAP3 |
| default y |
| select SOC_HAS_OMAP2_SDRC |
| |
| config SOC_TI81XX |
| bool "TI81XX support" |
| depends on ARCH_OMAP3 |
| default y |
| |
| config OMAP_PACKAGE_ZAF |
| bool |
| |
| config OMAP_PACKAGE_ZAC |
| bool |
| |
| config OMAP_PACKAGE_CBC |
| bool |
| |
| config OMAP_PACKAGE_CBB |
| bool |
| |
| config OMAP_PACKAGE_CUS |
| bool |
| |
| config OMAP_PACKAGE_CBP |
| bool |
| |
| comment "OMAP Board Type" |
| depends on ARCH_OMAP2PLUS |
| |
| config MACH_OMAP_GENERIC |
| bool "Generic OMAP2+ board" |
| depends on ARCH_OMAP2PLUS |
| default y |
| help |
| Support for generic TI OMAP2+ boards using Flattened Device Tree. |
| More information at Documentation/devicetree |
| |
| config MACH_OMAP2_TUSB6010 |
| bool |
| depends on ARCH_OMAP2 && SOC_OMAP2420 |
| default y if MACH_NOKIA_N8X0 |
| |
| config MACH_OMAP_H4 |
| bool "OMAP 2420 H4 board" |
| depends on SOC_OMAP2420 |
| default y |
| select OMAP_DEBUG_DEVICES |
| select OMAP_PACKAGE_ZAF |
| |
| config MACH_OMAP_2430SDP |
| bool "OMAP 2430 SDP board" |
| depends on SOC_OMAP2430 |
| default y |
| select OMAP_PACKAGE_ZAC |
| |
| config MACH_OMAP3_BEAGLE |
| bool "OMAP3 BEAGLE board" |
| depends on ARCH_OMAP3 |
| default y |
| select OMAP_PACKAGE_CBB |
| |
| config MACH_DEVKIT8000 |
| bool "DEVKIT8000 board" |
| depends on ARCH_OMAP3 |
| default y |
| select OMAP_PACKAGE_CUS |
| |
| config MACH_OMAP_LDP |
| bool "OMAP3 LDP board" |
| depends on ARCH_OMAP3 |
| default y |
| select OMAP_PACKAGE_CBB |
| |
| config MACH_OMAP3530_LV_SOM |
| bool "OMAP3 Logic 3530 LV SOM board" |
| depends on ARCH_OMAP3 |
| default y |
| select OMAP_PACKAGE_CBB |
| help |
| Support for the LogicPD OMAP3530 SOM Development kit |
| for full description please see the products webpage at |
| http://www.logicpd.com/products/development-kits/texas-instruments-zoom%E2%84%A2-omap35x-development-kit |
| |
| config MACH_OMAP3_TORPEDO |
| bool "OMAP3 Logic 35x Torpedo board" |
| depends on ARCH_OMAP3 |
| default y |
| select OMAP_PACKAGE_CBB |
| help |
| Support for the LogicPD OMAP35x Torpedo Development kit |
| for full description please see the products webpage at |
| http://www.logicpd.com/products/development-kits/zoom-omap35x-torpedo-development-kit |
| |
| config MACH_OVERO |
| bool "Gumstix Overo board" |
| depends on ARCH_OMAP3 |
| default y |
| select OMAP_PACKAGE_CBB |
| |
| config MACH_OMAP3EVM |
| bool "OMAP 3530 EVM board" |
| depends on ARCH_OMAP3 |
| default y |
| select OMAP_PACKAGE_CBB |
| |
| config MACH_OMAP3517EVM |
| bool "OMAP3517/ AM3517 EVM board" |
| depends on ARCH_OMAP3 |
| default y |
| select OMAP_PACKAGE_CBB |
| |
| config MACH_CRANEBOARD |
| bool "AM3517/05 CRANE board" |
| depends on ARCH_OMAP3 |
| select OMAP_PACKAGE_CBB |
| |
| config MACH_OMAP3_PANDORA |
| bool "OMAP3 Pandora" |
| depends on ARCH_OMAP3 |
| default y |
| select OMAP_PACKAGE_CBB |
| select REGULATOR_FIXED_VOLTAGE if REGULATOR |
| |
| config MACH_TOUCHBOOK |
| bool "OMAP3 Touch Book" |
| depends on ARCH_OMAP3 |
| default y |
| select OMAP_PACKAGE_CBB |
| |
| config MACH_OMAP_3430SDP |
| bool "OMAP 3430 SDP board" |
| depends on ARCH_OMAP3 |
| default y |
| select OMAP_PACKAGE_CBB |
| |
| config MACH_NOKIA_N800 |
| bool |
| |
| config MACH_NOKIA_N810 |
| bool |
| |
| config MACH_NOKIA_N810_WIMAX |
| bool |
| |
| config MACH_NOKIA_N8X0 |
| bool "Nokia N800/N810" |
| depends on SOC_OMAP2420 |
| default y |
| select MACH_NOKIA_N800 |
| select MACH_NOKIA_N810 |
| select MACH_NOKIA_N810_WIMAX |
| select OMAP_PACKAGE_ZAC |
| |
| config MACH_NOKIA_RM680 |
| bool "Nokia N950 (RM-680) / N9 (RM-696) phones" |
| depends on ARCH_OMAP3 |
| default y |
| select MACH_NOKIA_RM696 |
| select OMAP_PACKAGE_CBB |
| |
| config MACH_NOKIA_RX51 |
| bool "Nokia N900 (RX-51) phone" |
| depends on ARCH_OMAP3 |
| default y |
| select OMAP_PACKAGE_CBB |
| |
| config MACH_OMAP_ZOOM2 |
| bool "OMAP3 Zoom2 board" |
| depends on ARCH_OMAP3 |
| default y |
| select OMAP_PACKAGE_CBB |
| select REGULATOR_FIXED_VOLTAGE if REGULATOR |
| |
| config MACH_OMAP_ZOOM3 |
| bool "OMAP3630 Zoom3 board" |
| depends on ARCH_OMAP3 |
| default y |
| select OMAP_PACKAGE_CBP |
| select REGULATOR_FIXED_VOLTAGE if REGULATOR |
| |
| config MACH_CM_T35 |
| bool "CompuLab CM-T35/CM-T3730 modules" |
| depends on ARCH_OMAP3 |
| default y |
| select MACH_CM_T3730 |
| select OMAP_PACKAGE_CUS |
| |
| config MACH_CM_T3517 |
| bool "CompuLab CM-T3517 module" |
| depends on ARCH_OMAP3 |
| default y |
| select OMAP_PACKAGE_CBB |
| |
| config MACH_CM_T3730 |
| bool |
| |
| config MACH_IGEP0020 |
| bool "IGEP v2 board" |
| depends on ARCH_OMAP3 |
| default y |
| select OMAP_PACKAGE_CBB |
| |
| config MACH_IGEP0030 |
| bool "IGEP OMAP3 module" |
| depends on ARCH_OMAP3 |
| default y |
| select MACH_IGEP0020 |
| select OMAP_PACKAGE_CBB |
| |
| config MACH_SBC3530 |
| bool "OMAP3 SBC STALKER board" |
| depends on ARCH_OMAP3 |
| default y |
| select OMAP_PACKAGE_CUS |
| |
| config MACH_OMAP_3630SDP |
| bool "OMAP3630 SDP board" |
| depends on ARCH_OMAP3 |
| default y |
| select OMAP_PACKAGE_CBP |
| |
| config MACH_TI8168EVM |
| bool "TI8168 Evaluation Module" |
| depends on SOC_TI81XX |
| default y |
| |
| config MACH_TI8148EVM |
| bool "TI8148 Evaluation Module" |
| depends on SOC_TI81XX |
| default y |
| |
| config OMAP3_EMU |
| bool "OMAP3 debugging peripherals" |
| depends on ARCH_OMAP3 |
| select ARM_AMBA |
| select OC_ETM |
| help |
| Say Y here to enable debugging hardware of omap3 |
| |
| config OMAP3_SDRC_AC_TIMING |
| bool "Enable SDRC AC timing register changes" |
| depends on ARCH_OMAP3 |
| default n |
| help |
| If you know that none of your system initiators will attempt to |
| access SDRAM during CORE DVFS, select Y here. This should boost |
| SDRAM performance at lower CORE OPPs. There are relatively few |
| users who will wish to say yes at this point - almost everyone will |
| wish to say no. Selecting yes without understanding what is |
| going on could result in system crashes; |
| |
| config OMAP4_ERRATA_I688 |
| bool "OMAP4 errata: Async Bridge Corruption" |
| depends on (ARCH_OMAP4 || SOC_OMAP5) && !ARCH_MULTIPLATFORM |
| select ARCH_HAS_BARRIERS |
| help |
| If a data is stalled inside asynchronous bridge because of back |
| pressure, it may be accepted multiple times, creating pointer |
| misalignment that will corrupt next transfers on that data path |
| until next reset of the system (No recovery procedure once the |
| issue is hit, the path remains consistently broken). Async bridge |
| can be found on path between MPU to EMIF and MPU to L3 interconnect. |
| This situation can happen only when the idle is initiated by a |
| Master Request Disconnection (which is trigged by software when |
| executing WFI on CPU). |
| The work-around for this errata needs all the initiators connected |
| through async bridge must ensure that data path is properly drained |
| before issuing WFI. This condition will be met if one Strongly ordered |
| access is performed to the target right before executing the WFI. |
| In MPU case, L3 T2ASYNC FIFO and DDR T2ASYNC FIFO needs to be drained. |
| IO barrier ensure that there is no synchronisation loss on initiators |
| operating on both interconnect port simultaneously. |
| endmenu |
| |
| endif |