m68knommu: make Coldfire 548x support more generic

The ColdFire 547x family of processors is very similar to the ColdFire
548x series. Almost all of the support for them is the same. Make the
code supporting the 548x more gneric, so it will be capable of
supporting both families.

For the most part this is a renaming excerise to make the support
code more obviously apply to both families.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
diff --git a/arch/m68k/include/asm/cacheflush_no.h b/arch/m68k/include/asm/cacheflush_no.h
index 29f7620..9246392 100644
--- a/arch/m68k/include/asm/cacheflush_no.h
+++ b/arch/m68k/include/asm/cacheflush_no.h
@@ -5,7 +5,7 @@
  * (C) Copyright 2000-2004, Greg Ungerer <gerg@snapgear.com>
  */
 #include <linux/mm.h>
-#if defined(CONFIG_M5407) || defined(CONFIG_M548x)
+#if defined(CONFIG_M5407) || defined(CONFIG_M54xx)
 #include <asm/m54xxacr.h>
 #endif
 
diff --git a/arch/m68k/include/asm/coldfire.h b/arch/m68k/include/asm/coldfire.h
index 3b0a34d..213028c 100644
--- a/arch/m68k/include/asm/coldfire.h
+++ b/arch/m68k/include/asm/coldfire.h
@@ -32,7 +32,7 @@
  */
 #define	MCF_MBAR	0x10000000
 #define	MCF_MBAR2	0x80000000
-#if defined(CONFIG_M548x)
+#if defined(CONFIG_M54xx)
 #define	MCF_IPSBAR	MCF_MBAR
 #elif defined(CONFIG_M520x)
 #define	MCF_IPSBAR	0xFC000000
diff --git a/arch/m68k/include/asm/gpio.h b/arch/m68k/include/asm/gpio.h
index 1b57adb..c64c7b7 100644
--- a/arch/m68k/include/asm/gpio.h
+++ b/arch/m68k/include/asm/gpio.h
@@ -37,7 +37,7 @@
 #if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || \
     defined(CONFIG_M520x) || defined(CONFIG_M523x) || \
     defined(CONFIG_M527x) || defined(CONFIG_M528x) || \
-    defined(CONFIG_M532x) || defined(CONFIG_M548x)
+    defined(CONFIG_M532x) || defined(CONFIG_M54xx)
 
 /* These parts have GPIO organized by 8 bit ports */
 
diff --git a/arch/m68k/include/asm/m54xxacr.h b/arch/m68k/include/asm/m54xxacr.h
index 7d28da4..76d6490 100644
--- a/arch/m68k/include/asm/m54xxacr.h
+++ b/arch/m68k/include/asm/m54xxacr.h
@@ -45,7 +45,7 @@
 #define ICACHE_SIZE 0x4000	/* instruction - 16k */
 #define DCACHE_SIZE 0x2000	/* data - 8k */
 
-#elif defined(CONFIG_M548x)
+#elif defined(CONFIG_M54xx)
 
 #define ICACHE_SIZE 0x8000	/* instruction - 32k */
 #define DCACHE_SIZE 0x8000	/* data - 32k */
diff --git a/arch/m68k/include/asm/m548xgpt.h b/arch/m68k/include/asm/m54xxgpt.h
similarity index 95%
rename from arch/m68k/include/asm/m548xgpt.h
rename to arch/m68k/include/asm/m54xxgpt.h
index c8ef158..47ae5cf 100644
--- a/arch/m68k/include/asm/m548xgpt.h
+++ b/arch/m68k/include/asm/m54xxgpt.h
@@ -1,13 +1,13 @@
 /*
- * File:	m548xgpt.h
- * Purpose:	Register and bit definitions for the MCF548X
+ * File:	m54xxgpt.h
+ * Purpose:	Register and bit definitions for the MCF54XX
  *
  * Notes:
  *
  */
 
-#ifndef m548xgpt_h
-#define m548xgpt_h
+#ifndef m54xxgpt_h
+#define m54xxgpt_h
 
 /*********************************************************************
 *
@@ -85,4 +85,4 @@
 
 /********************************************************************/
 
-#endif /* m548xgpt_h */
+#endif /* m54xxgpt_h */
diff --git a/arch/m68k/include/asm/m548xsim.h b/arch/m68k/include/asm/m54xxsim.h
similarity index 91%
rename from arch/m68k/include/asm/m548xsim.h
rename to arch/m68k/include/asm/m54xxsim.h
index 149135e..c46826c 100644
--- a/arch/m68k/include/asm/m548xsim.h
+++ b/arch/m68k/include/asm/m54xxsim.h
@@ -1,9 +1,9 @@
 /*
- *	m548xsim.h -- ColdFire 547x/548x System Integration Unit support.
+ *	m54xxsim.h -- ColdFire 547x/548x System Integration Unit support.
  */
 
-#ifndef	m548xsim_h
-#define m548xsim_h
+#ifndef	m54xxsim_h
+#define m54xxsim_h
 
 #define MCFINT_VECBASE      64
 
@@ -52,4 +52,4 @@
 #define MCF_PAR_PSC_RTS_RTS	(0x30)
 #define MCF_PAR_PSC_CANRX	(0x40)
 
-#endif	/* m548xsim_h */
+#endif	/* m54xxsim_h */
diff --git a/arch/m68k/include/asm/mcfcache.h b/arch/m68k/include/asm/mcfcache.h
index 7acb406..1b66018 100644
--- a/arch/m68k/include/asm/mcfcache.h
+++ b/arch/m68k/include/asm/mcfcache.h
@@ -107,7 +107,7 @@
 .endm
 #endif /* CONFIG_M532x */
 
-#if defined(CONFIG_M5407) || defined(CONFIG_M548x)
+#if defined(CONFIG_M5407) || defined(CONFIG_M54xx)
 
 #include <asm/m54xxacr.h>
 
@@ -131,7 +131,7 @@
 	movec	%d0,%CACR
 	nop
 .endm
-#endif /* CONFIG_M5407 || CONFIG_M548x */
+#endif /* CONFIG_M5407 || CONFIG_M54xx */
 
 #if defined(CONFIG_M520x)
 .macro CACHE_ENABLE
diff --git a/arch/m68k/include/asm/mcfsim.h b/arch/m68k/include/asm/mcfsim.h
index 6901fd6..ebd0304 100644
--- a/arch/m68k/include/asm/mcfsim.h
+++ b/arch/m68k/include/asm/mcfsim.h
@@ -41,8 +41,8 @@
 #elif defined(CONFIG_M5407)
 #include <asm/m5407sim.h>
 #include <asm/mcfintc.h>
-#elif defined(CONFIG_M548x)
-#include <asm/m548xsim.h>
+#elif defined(CONFIG_M54xx)
+#include <asm/m54xxsim.h>
 #endif
 
 /****************************************************************************/
diff --git a/arch/m68k/include/asm/mcfuart.h b/arch/m68k/include/asm/mcfuart.h
index db72e2b..c67daca 100644
--- a/arch/m68k/include/asm/mcfuart.h
+++ b/arch/m68k/include/asm/mcfuart.h
@@ -47,11 +47,11 @@
 #define MCFUART_BASE1		0xfc060000	/* Base address of UART1 */
 #define MCFUART_BASE2		0xfc064000	/* Base address of UART2 */
 #define MCFUART_BASE3		0xfc068000	/* Base address of UART3 */
-#elif defined(CONFIG_M548x)
-#define MCFUART_BASE1		0x8600		/* on M548x */
-#define MCFUART_BASE2		0x8700		/* on M548x */
-#define MCFUART_BASE3		0x8800		/* on M548x */
-#define MCFUART_BASE4		0x8900		/* on M548x */
+#elif defined(CONFIG_M54xx)
+#define MCFUART_BASE1		0x8600		/* on M54xx */
+#define MCFUART_BASE2		0x8700		/* on M54xx */
+#define MCFUART_BASE3		0x8800		/* on M54xx */
+#define MCFUART_BASE4		0x8900		/* on M54xx */
 #endif
 
 
@@ -217,7 +217,7 @@
 #define	MCFUART_URF_RXS		0xc0		/* Receiver status */
 #endif
 
-#if defined(CONFIG_M548x)
+#if defined(CONFIG_M54xx)
 #define MCFUART_TXFIFOSIZE	512
 #elif defined(CONFIG_M5272)
 #define MCFUART_TXFIFOSIZE	25
diff --git a/arch/m68knommu/Kconfig b/arch/m68knommu/Kconfig
index fa9f746..060f142 100644
--- a/arch/m68knommu/Kconfig
+++ b/arch/m68knommu/Kconfig
@@ -181,9 +181,14 @@
 	select GENERIC_CLOCKEVENTS
 	default y
 
+config M54xx
+	bool
+	depends on M548x
+	default y
+
 config COLDFIRE
 	bool
-	depends on (M5206 || M5206e || M520x || M523x || M5249 || M527x || M5272 || M528x || M5307 || M532x || M5407 || M548x)
+	depends on (M5206 || M5206e || M520x || M523x || M5249 || M527x || M5272 || M528x || M5307 || M532x || M5407 || M54xx)
 	select GENERIC_GPIO
 	select ARCH_REQUIRE_GPIOLIB
 	default y
diff --git a/arch/m68knommu/Makefile b/arch/m68knommu/Makefile
index 026ef16..0a0b1dd 100644
--- a/arch/m68knommu/Makefile
+++ b/arch/m68knommu/Makefile
@@ -25,7 +25,7 @@
 platform-$(CONFIG_M5307)	:= 5307
 platform-$(CONFIG_M532x)	:= 532x
 platform-$(CONFIG_M5407)	:= 5407
-platform-$(CONFIG_M548x)	:= 548x
+platform-$(CONFIG_M54xx)	:= 54xx
 PLATFORM := $(platform-y)
 
 board-$(CONFIG_PILOT)		:= pilot
@@ -74,7 +74,7 @@
 cpuclass-$(CONFIG_M5307)	:= coldfire
 cpuclass-$(CONFIG_M532x)	:= coldfire
 cpuclass-$(CONFIG_M5407)	:= coldfire
-cpuclass-$(CONFIG_M548x)	:= coldfire
+cpuclass-$(CONFIG_M54xx)	:= coldfire
 cpuclass-$(CONFIG_M68328)	:= 68328
 cpuclass-$(CONFIG_M68EZ328)	:= 68328
 cpuclass-$(CONFIG_M68VZ328)	:= 68328
@@ -102,7 +102,7 @@
 cflags-$(CONFIG_M5307)		:= $(call cc-option,-m5307,-m5200)
 cflags-$(CONFIG_M532x)		:= $(call cc-option,-mcpu=532x,-m5307)
 cflags-$(CONFIG_M5407)		:= $(call cc-option,-m5407,-m5200)
-cflags-$(CONFIG_M548x)		:= $(call cc-option,-m5407,-m5200)
+cflags-$(CONFIG_M54xx)		:= $(call cc-option,-m5407,-m5200)
 cflags-$(CONFIG_M68328)		:= -m68000
 cflags-$(CONFIG_M68EZ328)	:= -m68000
 cflags-$(CONFIG_M68VZ328)	:= -m68000
diff --git a/arch/m68knommu/platform/548x/Makefile b/arch/m68knommu/platform/54xx/Makefile
similarity index 100%
rename from arch/m68knommu/platform/548x/Makefile
rename to arch/m68knommu/platform/54xx/Makefile
diff --git a/arch/m68knommu/platform/548x/config.c b/arch/m68knommu/platform/54xx/config.c
similarity index 74%
rename from arch/m68knommu/platform/548x/config.c
rename to arch/m68knommu/platform/54xx/config.c
index 9888846..7813098 100644
--- a/arch/m68knommu/platform/548x/config.c
+++ b/arch/m68knommu/platform/54xx/config.c
@@ -1,7 +1,7 @@
 /***************************************************************************/
 
 /*
- *	linux/arch/m68knommu/platform/548x/config.c
+ *	linux/arch/m68knommu/platform/54xx/config.c
  *
  *	Copyright (C) 2010, Philippe De Muyter <phdm@macqel.be>
  */
@@ -15,13 +15,13 @@
 #include <linux/io.h>
 #include <asm/machdep.h>
 #include <asm/coldfire.h>
-#include <asm/m548xsim.h>
+#include <asm/m54xxsim.h>
 #include <asm/mcfuart.h>
-#include <asm/m548xgpt.h>
+#include <asm/m54xxgpt.h>
 
 /***************************************************************************/
 
-static struct mcf_platform_uart m548x_uart_platform[] = {
+static struct mcf_platform_uart m54xx_uart_platform[] = {
 	{
 		.mapbase	= MCF_MBAR + MCFUART_BASE1,
 		.irq		= 64 + 35,
@@ -40,20 +40,20 @@
 	},
 };
 
-static struct platform_device m548x_uart = {
+static struct platform_device m54xx_uart = {
 	.name			= "mcfuart",
 	.id			= 0,
-	.dev.platform_data	= m548x_uart_platform,
+	.dev.platform_data	= m54xx_uart_platform,
 };
 
-static struct platform_device *m548x_devices[] __initdata = {
-	&m548x_uart,
+static struct platform_device *m54xx_devices[] __initdata = {
+	&m54xx_uart,
 };
 
 
 /***************************************************************************/
 
-static void __init m548x_uart_init_line(int line, int irq)
+static void __init m54xx_uart_init_line(int line, int irq)
 {
 	int rts_cts;
 
@@ -72,18 +72,18 @@
 						MCF_MBAR + MCF_PAR_PSC(line));
 }
 
-static void __init m548x_uarts_init(void)
+static void __init m54xx_uarts_init(void)
 {
-	const int nrlines = ARRAY_SIZE(m548x_uart_platform);
+	const int nrlines = ARRAY_SIZE(m54xx_uart_platform);
 	int line;
 
 	for (line = 0; (line < nrlines); line++)
-		m548x_uart_init_line(line, m548x_uart_platform[line].irq);
+		m54xx_uart_init_line(line, m54xx_uart_platform[line].irq);
 }
 
 /***************************************************************************/
 
-static void mcf548x_reset(void)
+static void mcf54xx_reset(void)
 {
 	/* disable interrupts and enable the watchdog */
 	asm("movew #0x2700, %sr\n");
@@ -97,8 +97,8 @@
 
 void __init config_BSP(char *commandp, int size)
 {
-	mach_reset = mcf548x_reset;
-	m548x_uarts_init();
+	mach_reset = mcf54xx_reset;
+	m54xx_uarts_init();
 }
 
 /***************************************************************************/
@@ -106,7 +106,7 @@
 static int __init init_BSP(void)
 {
 
-	platform_add_devices(m548x_devices, ARRAY_SIZE(m548x_devices));
+	platform_add_devices(m54xx_devices, ARRAY_SIZE(m54xx_devices));
 	return 0;
 }
 
diff --git a/arch/m68knommu/platform/coldfire/Makefile b/arch/m68knommu/platform/coldfire/Makefile
index 45f501f..53a27e1 100644
--- a/arch/m68knommu/platform/coldfire/Makefile
+++ b/arch/m68knommu/platform/coldfire/Makefile
@@ -26,7 +26,7 @@
 obj-$(CONFIG_M5307)	+= timers.o intc.o
 obj-$(CONFIG_M532x)	+= timers.o intc-simr.o
 obj-$(CONFIG_M5407)	+= timers.o intc.o
-obj-$(CONFIG_M548x)	+= sltimers.o intc-2.o
+obj-$(CONFIG_M54xx)	+= sltimers.o intc-2.o
 
 obj-y			+= pinmux.o gpio.o
 extra-y := head.o