Move USB network drivers to drivers/net/usb.
It is preferable to group drivers by usage (net, scsi, ATA, ...) than
by bus. When reviewing drivers, the [PCI|USB|PCMCIA|...] maintainer
is probably less qualified on networking issues than a networking
maintainer. Also, from a practical standpoint, chips often
appear on multiple buses, which is why we do not put drivers into
drivers/pci/net.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index b86ccd2..d9842d8 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -2499,6 +2499,8 @@
source "drivers/net/wireless/Kconfig"
+source "drivers/net/usb/Kconfig"
+
source "drivers/net/pcmcia/Kconfig"
source "drivers/net/wan/Kconfig"
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 59c0459..c5d8423 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -206,6 +206,14 @@
obj-$(CONFIG_WAN) += wan/
obj-$(CONFIG_ARCNET) += arcnet/
obj-$(CONFIG_NET_PCMCIA) += pcmcia/
+
+obj-$(CONFIG_USB_CATC) += usb/
+obj-$(CONFIG_USB_KAWETH) += usb/
+obj-$(CONFIG_USB_PEGASUS) += usb/
+obj-$(CONFIG_USB_RTL8150) += usb/
+obj-$(CONFIG_USB_USBNET) += usb/
+obj-$(CONFIG_USB_ZD1201) += usb/
+
obj-y += wireless/
obj-$(CONFIG_NET_TULIP) += tulip/
obj-$(CONFIG_HAMRADIO) += hamradio/
diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig
new file mode 100644
index 0000000..3de564b
--- /dev/null
+++ b/drivers/net/usb/Kconfig
@@ -0,0 +1,338 @@
+#
+# USB Network devices configuration
+#
+comment "Networking support is needed for USB Network Adapter support"
+ depends on USB && !NET
+
+menu "USB Network Adapters"
+ depends on USB && NET
+
+config USB_CATC
+ tristate "USB CATC NetMate-based Ethernet device support (EXPERIMENTAL)"
+ depends on EXPERIMENTAL
+ select CRC32
+ ---help---
+ Say Y if you want to use one of the following 10Mbps USB Ethernet
+ device based on the EL1210A chip. Supported devices are:
+ Belkin F5U011
+ Belkin F5U111
+ CATC NetMate
+ CATC NetMate II
+ smartBridges smartNIC
+
+ This driver makes the adapter appear as a normal Ethernet interface,
+ typically on eth0, if it is the only ethernet device, or perhaps on
+ eth1, if you have a PCI or ISA ethernet card installed.
+
+ To compile this driver as a module, choose M here: the
+ module will be called catc.
+
+config USB_KAWETH
+ tristate "USB KLSI KL5USB101-based ethernet device support"
+ ---help---
+ Say Y here if you want to use one of the following 10Mbps only
+ USB Ethernet adapters based on the KLSI KL5KUSB101B chipset:
+ 3Com 3C19250
+ ADS USB-10BT
+ ATEN USB Ethernet
+ ASANTE USB To Ethernet Adapter
+ AOX Endpoints USB Ethernet
+ Correga K.K.
+ D-Link DSB-650C and DU-E10
+ Entrega / Portgear E45
+ I-O DATA USB-ET/T
+ Jaton USB Ethernet Device Adapter
+ Kingston Technology USB Ethernet Adapter
+ Linksys USB10T
+ Mobility USB-Ethernet Adapter
+ NetGear EA-101
+ Peracom Enet and Enet2
+ Portsmith Express Ethernet Adapter
+ Shark Pocket Adapter
+ SMC 2202USB
+ Sony Vaio port extender
+
+ This driver is likely to work with most 10Mbps only USB Ethernet
+ adapters, including some "no brand" devices. It does NOT work on
+ SmartBridges smartNIC or on Belkin F5U111 devices - you should use
+ the CATC NetMate driver for those. If you are not sure which one
+ you need, select both, and the correct one should be selected for
+ you.
+
+ This driver makes the adapter appear as a normal Ethernet interface,
+ typically on eth0, if it is the only ethernet device, or perhaps on
+ eth1, if you have a PCI or ISA ethernet card installed.
+
+ To compile this driver as a module, choose M here: the
+ module will be called kaweth.
+
+config USB_PEGASUS
+ tristate "USB Pegasus/Pegasus-II based ethernet device support"
+ select MII
+ ---help---
+ Say Y here if you know you have Pegasus or Pegasus-II based adapter.
+ If in doubt then look at <file:drivers/usb/net/pegasus.h> for the
+ complete list of supported devices.
+
+ If your particular adapter is not in the list and you are _sure_ it
+ is Pegasus or Pegasus II based then send me
+ <petkan@users.sourceforge.net> vendor and device IDs.
+
+ To compile this driver as a module, choose M here: the
+ module will be called pegasus.
+
+config USB_RTL8150
+ tristate "USB RTL8150 based ethernet device support (EXPERIMENTAL)"
+ depends on EXPERIMENTAL
+ select MII
+ help
+ Say Y here if you have RTL8150 based usb-ethernet adapter.
+ Send me <petkan@users.sourceforge.net> any comments you may have.
+ You can also check for updates at <http://pegasus2.sourceforge.net/>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called rtl8150.
+
+config USB_USBNET_MII
+ tristate
+ default n
+
+config USB_USBNET
+ tristate "Multi-purpose USB Networking Framework"
+ select MII if USB_USBNET_MII != n
+ ---help---
+ This driver supports several kinds of network links over USB,
+ with "minidrivers" built around a common network driver core
+ that supports deep queues for efficient transfers. (This gives
+ better performance with small packets and at high speeds).
+
+ The USB host runs "usbnet", and the other end of the link might be:
+
+ - Another USB host, when using USB "network" or "data transfer"
+ cables. These are often used to network laptops to PCs, like
+ "Laplink" parallel cables or some motherboards. These rely
+ on specialized chips from many suppliers.
+
+ - An intelligent USB gadget, perhaps embedding a Linux system.
+ These include PDAs running Linux (iPaq, Yopy, Zaurus, and
+ others), and devices that interoperate using the standard
+ CDC-Ethernet specification (including many cable modems).
+
+ - Network adapter hardware (like those for 10/100 Ethernet) which
+ uses this driver framework.
+
+ The link will appear with a name like "usb0", when the link is
+ a two-node link, or "eth0" for most CDC-Ethernet devices. Those
+ two-node links are most easily managed with Ethernet Bridging
+ (CONFIG_BRIDGE) instead of routing.
+
+ For more information see <http://www.linux-usb.org/usbnet/>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called usbnet.
+
+config USB_NET_AX8817X
+ tristate "ASIX AX88xxx Based USB 2.0 Ethernet Adapters"
+ depends on USB_USBNET && NET_ETHERNET
+ select CRC32
+ select USB_USBNET_MII
+ default y
+ help
+ This option adds support for ASIX AX88xxx based USB 2.0
+ 10/100 Ethernet adapters.
+
+ This driver should work with at least the following devices:
+ * Aten UC210T
+ * ASIX AX88172
+ * Billionton Systems, USB2AR
+ * Buffalo LUA-U2-KTX
+ * Corega FEther USB2-TX
+ * D-Link DUB-E100
+ * Hawking UF200
+ * Linksys USB200M
+ * Netgear FA120
+ * Sitecom LN-029
+ * Intellinet USB 2.0 Ethernet
+ * ST Lab USB 2.0 Ethernet
+ * TrendNet TU2-ET100
+
+ This driver creates an interface named "ethX", where X depends on
+ what other networking devices you have in use.
+
+
+config USB_NET_CDCETHER
+ tristate "CDC Ethernet support (smart devices such as cable modems)"
+ depends on USB_USBNET
+ default y
+ help
+ This option supports devices conforming to the Communication Device
+ Class (CDC) Ethernet Control Model, a specification that's easy to
+ implement in device firmware. The CDC specifications are available
+ from <http://www.usb.org/>.
+
+ CDC Ethernet is an implementation option for DOCSIS cable modems
+ that support USB connectivity, used for non-Microsoft USB hosts.
+ The Linux-USB CDC Ethernet Gadget driver is an open implementation.
+ This driver should work with at least the following devices:
+
+ * Ericsson PipeRider (all variants)
+ * Motorola (DM100 and SB4100)
+ * Broadcom Cable Modem (reference design)
+ * Toshiba PCX1100U
+ * ...
+
+ This driver creates an interface named "ethX", where X depends on
+ what other networking devices you have in use. However, if the
+ IEEE 802 "local assignment" bit is set in the address, a "usbX"
+ name is used instead.
+
+config USB_NET_DM9601
+ tristate "Davicom DM9601 based USB 1.1 10/100 ethernet devices"
+ depends on USB_USBNET
+ select CRC32
+ select USB_USBNET_MII
+ help
+ This option adds support for Davicom DM9601 based USB 1.1
+ 10/100 Ethernet adapters.
+
+config USB_NET_GL620A
+ tristate "GeneSys GL620USB-A based cables"
+ depends on USB_USBNET
+ help
+ Choose this option if you're using a host-to-host cable,
+ or PC2PC motherboard, with this chip.
+
+ Note that the half-duplex "GL620USB" is not supported.
+
+config USB_NET_NET1080
+ tristate "NetChip 1080 based cables (Laplink, ...)"
+ default y
+ depends on USB_USBNET
+ help
+ Choose this option if you're using a host-to-host cable based
+ on this design: one NetChip 1080 chip and supporting logic,
+ optionally with LEDs that indicate traffic
+
+config USB_NET_PLUSB
+ tristate "Prolific PL-2301/2302 based cables"
+ # if the handshake/init/reset problems, from original 'plusb',
+ # are ever resolved ... then remove "experimental"
+ depends on USB_USBNET && EXPERIMENTAL
+ help
+ Choose this option if you're using a host-to-host cable
+ with one of these chips.
+
+config USB_NET_MCS7830
+ tristate "MosChip MCS7830 based Ethernet adapters"
+ depends on USB_USBNET
+ select USB_USBNET_MII
+ help
+ Choose this option if you're using a 10/100 Ethernet USB2
+ adapter based on the MosChip 7830 controller. This includes
+ adapters marketed under the DeLOCK brand.
+
+config USB_NET_RNDIS_HOST
+ tristate "Host for RNDIS and ActiveSync devices (EXPERIMENTAL)"
+ depends on USB_USBNET && EXPERIMENTAL
+ select USB_NET_CDCETHER
+ help
+ This option enables hosting "Remote NDIS" USB networking links,
+ as encouraged by Microsoft (instead of CDC Ethernet!) for use in
+ various devices that may only support this protocol. A variant
+ of this protocol (with even less public documentation) seems to
+ be at the root of Microsoft's "ActiveSync" too.
+
+ Avoid using this protocol unless you have no better options.
+ The protocol specification is incomplete, and is controlled by
+ (and for) Microsoft; it isn't an "Open" ecosystem or market.
+
+config USB_NET_CDC_SUBSET
+ tristate "Simple USB Network Links (CDC Ethernet subset)"
+ depends on USB_USBNET
+ default y
+ help
+ This driver module supports USB network devices that can work
+ without any device-specific information. Select it if you have
+ one of these drivers.
+
+ Note that while many USB host-to-host cables can work in this mode,
+ that may mean not being able to talk to Win32 systems or more
+ commonly not being able to handle certain events (like replugging
+ the host on the other end) very well. Also, these devices will
+ not generally have permanently assigned Ethernet addresses.
+
+config USB_ALI_M5632
+ boolean "ALi M5632 based 'USB 2.0 Data Link' cables"
+ depends on USB_NET_CDC_SUBSET
+ help
+ Choose this option if you're using a host-to-host cable
+ based on this design, which supports USB 2.0 high speed.
+
+config USB_AN2720
+ boolean "AnchorChips 2720 based cables (Xircom PGUNET, ...)"
+ depends on USB_NET_CDC_SUBSET
+ help
+ Choose this option if you're using a host-to-host cable
+ based on this design. Note that AnchorChips is now a
+ Cypress brand.
+
+config USB_BELKIN
+ boolean "eTEK based host-to-host cables (Advance, Belkin, ...)"
+ depends on USB_NET_CDC_SUBSET
+ default y
+ help
+ Choose this option if you're using a host-to-host cable
+ based on this design: two NetChip 2890 chips and an Atmel
+ microcontroller, with LEDs that indicate traffic.
+
+config USB_ARMLINUX
+ boolean "Embedded ARM Linux links (iPaq, ...)"
+ depends on USB_NET_CDC_SUBSET
+ default y
+ help
+ Choose this option to support the "usb-eth" networking driver
+ used by most of the ARM Linux community with device controllers
+ such as the SA-11x0 and PXA-25x UDCs, or the tftp capabilities
+ in some PXA versions of the "blob" boot loader.
+
+ Linux-based "Gumstix" PXA-25x based systems use this protocol
+ to talk with other Linux systems.
+
+ Although the ROMs shipped with Sharp Zaurus products use a
+ different link level framing protocol, you can have them use
+ this simpler protocol by installing a different kernel.
+
+config USB_EPSON2888
+ boolean "Epson 2888 based firmware (DEVELOPMENT)"
+ depends on USB_NET_CDC_SUBSET
+ help
+ Choose this option to support the usb networking links used
+ by some sample firmware from Epson.
+
+config USB_KC2190
+ boolean "KT Technology KC2190 based cables (InstaNet)"
+ depends on USB_NET_CDC_SUBSET && EXPERIMENTAL
+ help
+ Choose this option if you're using a host-to-host cable
+ with one of these chips.
+
+config USB_NET_ZAURUS
+ tristate "Sharp Zaurus (stock ROMs) and compatible"
+ depends on USB_USBNET
+ select USB_NET_CDCETHER
+ select CRC32
+ default y
+ help
+ Choose this option to support the usb networking links used by
+ Zaurus models like the SL-5000D, SL-5500, SL-5600, A-300, B-500.
+ This also supports some related device firmware, as used in some
+ PDAs from Olympus and some cell phones from Motorola.
+
+ If you install an alternate image, such as the Linux 2.6 based
+ versions of OpenZaurus, you should no longer need to support this
+ protocol. Only the "eth-fd" or "net_fd" drivers in these devices
+ really need this non-conformant variant of CDC Ethernet (or in
+ some cases CDC MDLM) protocol, not "g_ether".
+
+
+endmenu
diff --git a/drivers/net/usb/Makefile b/drivers/net/usb/Makefile
new file mode 100644
index 0000000..595a539
--- /dev/null
+++ b/drivers/net/usb/Makefile
@@ -0,0 +1,23 @@
+#
+# Makefile for USB Network drivers
+#
+
+obj-$(CONFIG_USB_CATC) += catc.o
+obj-$(CONFIG_USB_KAWETH) += kaweth.o
+obj-$(CONFIG_USB_PEGASUS) += pegasus.o
+obj-$(CONFIG_USB_RTL8150) += rtl8150.o
+obj-$(CONFIG_USB_NET_AX8817X) += asix.o
+obj-$(CONFIG_USB_NET_CDCETHER) += cdc_ether.o
+obj-$(CONFIG_USB_NET_DM9601) += dm9601.o
+obj-$(CONFIG_USB_NET_GL620A) += gl620a.o
+obj-$(CONFIG_USB_NET_NET1080) += net1080.o
+obj-$(CONFIG_USB_NET_PLUSB) += plusb.o
+obj-$(CONFIG_USB_NET_RNDIS_HOST) += rndis_host.o
+obj-$(CONFIG_USB_NET_CDC_SUBSET) += cdc_subset.o
+obj-$(CONFIG_USB_NET_ZAURUS) += zaurus.o
+obj-$(CONFIG_USB_NET_MCS7830) += mcs7830.o
+obj-$(CONFIG_USB_USBNET) += usbnet.o
+
+ifeq ($(CONFIG_USB_DEBUG),y)
+EXTRA_CFLAGS += -DDEBUG
+endif
diff --git a/drivers/net/usb/asix.c b/drivers/net/usb/asix.c
new file mode 100644
index 0000000..d5ef97b
--- /dev/null
+++ b/drivers/net/usb/asix.c
@@ -0,0 +1,1490 @@
+/*
+ * ASIX AX8817X based USB 2.0 Ethernet Devices
+ * Copyright (C) 2003-2006 David Hollis <dhollis@davehollis.com>
+ * Copyright (C) 2005 Phil Chang <pchang23@sbcglobal.net>
+ * Copyright (C) 2006 James Painter <jamie.painter@iname.com>
+ * Copyright (c) 2002-2003 TiVo Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+// #define DEBUG // error path messages, extra info
+// #define VERBOSE // more; success messages
+
+#include <linux/module.h>
+#include <linux/kmod.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/workqueue.h>
+#include <linux/mii.h>
+#include <linux/usb.h>
+#include <linux/crc32.h>
+
+#include "usbnet.h"
+
+#define DRIVER_VERSION "14-Jun-2006"
+static const char driver_name [] = "asix";
+
+/* ASIX AX8817X based USB 2.0 Ethernet Devices */
+
+#define AX_CMD_SET_SW_MII 0x06
+#define AX_CMD_READ_MII_REG 0x07
+#define AX_CMD_WRITE_MII_REG 0x08
+#define AX_CMD_SET_HW_MII 0x0a
+#define AX_CMD_READ_EEPROM 0x0b
+#define AX_CMD_WRITE_EEPROM 0x0c
+#define AX_CMD_WRITE_ENABLE 0x0d
+#define AX_CMD_WRITE_DISABLE 0x0e
+#define AX_CMD_READ_RX_CTL 0x0f
+#define AX_CMD_WRITE_RX_CTL 0x10
+#define AX_CMD_READ_IPG012 0x11
+#define AX_CMD_WRITE_IPG0 0x12
+#define AX_CMD_WRITE_IPG1 0x13
+#define AX_CMD_READ_NODE_ID 0x13
+#define AX_CMD_WRITE_IPG2 0x14
+#define AX_CMD_WRITE_MULTI_FILTER 0x16
+#define AX88172_CMD_READ_NODE_ID 0x17
+#define AX_CMD_READ_PHY_ID 0x19
+#define AX_CMD_READ_MEDIUM_STATUS 0x1a
+#define AX_CMD_WRITE_MEDIUM_MODE 0x1b
+#define AX_CMD_READ_MONITOR_MODE 0x1c
+#define AX_CMD_WRITE_MONITOR_MODE 0x1d
+#define AX_CMD_READ_GPIOS 0x1e
+#define AX_CMD_WRITE_GPIOS 0x1f
+#define AX_CMD_SW_RESET 0x20
+#define AX_CMD_SW_PHY_STATUS 0x21
+#define AX_CMD_SW_PHY_SELECT 0x22
+
+#define AX_MONITOR_MODE 0x01
+#define AX_MONITOR_LINK 0x02
+#define AX_MONITOR_MAGIC 0x04
+#define AX_MONITOR_HSFS 0x10
+
+/* AX88172 Medium Status Register values */
+#define AX88172_MEDIUM_FD 0x02
+#define AX88172_MEDIUM_TX 0x04
+#define AX88172_MEDIUM_FC 0x10
+#define AX88172_MEDIUM_DEFAULT \
+ ( AX88172_MEDIUM_FD | AX88172_MEDIUM_TX | AX88172_MEDIUM_FC )
+
+#define AX_MCAST_FILTER_SIZE 8
+#define AX_MAX_MCAST 64
+
+#define AX_SWRESET_CLEAR 0x00
+#define AX_SWRESET_RR 0x01
+#define AX_SWRESET_RT 0x02
+#define AX_SWRESET_PRTE 0x04
+#define AX_SWRESET_PRL 0x08
+#define AX_SWRESET_BZ 0x10
+#define AX_SWRESET_IPRL 0x20
+#define AX_SWRESET_IPPD 0x40
+
+#define AX88772_IPG0_DEFAULT 0x15
+#define AX88772_IPG1_DEFAULT 0x0c
+#define AX88772_IPG2_DEFAULT 0x12
+
+/* AX88772 & AX88178 Medium Mode Register */
+#define AX_MEDIUM_PF 0x0080
+#define AX_MEDIUM_JFE 0x0040
+#define AX_MEDIUM_TFC 0x0020
+#define AX_MEDIUM_RFC 0x0010
+#define AX_MEDIUM_ENCK 0x0008
+#define AX_MEDIUM_AC 0x0004
+#define AX_MEDIUM_FD 0x0002
+#define AX_MEDIUM_GM 0x0001
+#define AX_MEDIUM_SM 0x1000
+#define AX_MEDIUM_SBP 0x0800
+#define AX_MEDIUM_PS 0x0200
+#define AX_MEDIUM_RE 0x0100
+
+#define AX88178_MEDIUM_DEFAULT \
+ (AX_MEDIUM_PS | AX_MEDIUM_FD | AX_MEDIUM_AC | \
+ AX_MEDIUM_RFC | AX_MEDIUM_TFC | AX_MEDIUM_JFE | \
+ AX_MEDIUM_RE )
+
+#define AX88772_MEDIUM_DEFAULT \
+ (AX_MEDIUM_FD | AX_MEDIUM_RFC | \
+ AX_MEDIUM_TFC | AX_MEDIUM_PS | \
+ AX_MEDIUM_AC | AX_MEDIUM_RE )
+
+/* AX88772 & AX88178 RX_CTL values */
+#define AX_RX_CTL_SO 0x0080
+#define AX_RX_CTL_AP 0x0020
+#define AX_RX_CTL_AM 0x0010
+#define AX_RX_CTL_AB 0x0008
+#define AX_RX_CTL_SEP 0x0004
+#define AX_RX_CTL_AMALL 0x0002
+#define AX_RX_CTL_PRO 0x0001
+#define AX_RX_CTL_MFB_2048 0x0000
+#define AX_RX_CTL_MFB_4096 0x0100
+#define AX_RX_CTL_MFB_8192 0x0200
+#define AX_RX_CTL_MFB_16384 0x0300
+
+#define AX_DEFAULT_RX_CTL \
+ (AX_RX_CTL_SO | AX_RX_CTL_AB )
+
+/* GPIO 0 .. 2 toggles */
+#define AX_GPIO_GPO0EN 0x01 /* GPIO0 Output enable */
+#define AX_GPIO_GPO_0 0x02 /* GPIO0 Output value */
+#define AX_GPIO_GPO1EN 0x04 /* GPIO1 Output enable */
+#define AX_GPIO_GPO_1 0x08 /* GPIO1 Output value */
+#define AX_GPIO_GPO2EN 0x10 /* GPIO2 Output enable */
+#define AX_GPIO_GPO_2 0x20 /* GPIO2 Output value */
+#define AX_GPIO_RESERVED 0x40 /* Reserved */
+#define AX_GPIO_RSE 0x80 /* Reload serial EEPROM */
+
+#define AX_EEPROM_MAGIC 0xdeadbeef
+#define AX88172_EEPROM_LEN 0x40
+#define AX88772_EEPROM_LEN 0xff
+
+#define PHY_MODE_MARVELL 0x0000
+#define MII_MARVELL_LED_CTRL 0x0018
+#define MII_MARVELL_STATUS 0x001b
+#define MII_MARVELL_CTRL 0x0014
+
+#define MARVELL_LED_MANUAL 0x0019
+
+#define MARVELL_STATUS_HWCFG 0x0004
+
+#define MARVELL_CTRL_TXDELAY 0x0002
+#define MARVELL_CTRL_RXDELAY 0x0080
+
+/* This structure cannot exceed sizeof(unsigned long [5]) AKA 20 bytes */
+struct asix_data {
+ u8 multi_filter[AX_MCAST_FILTER_SIZE];
+ u8 phymode;
+ u8 ledmode;
+ u8 eeprom_len;
+};
+
+struct ax88172_int_data {
+ u16 res1;
+ u8 link;
+ u16 res2;
+ u8 status;
+ u16 res3;
+} __attribute__ ((packed));
+
+static int asix_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
+ u16 size, void *data)
+{
+ devdbg(dev,"asix_read_cmd() cmd=0x%02x value=0x%04x index=0x%04x size=%d",
+ cmd, value, index, size);
+ return usb_control_msg(
+ dev->udev,
+ usb_rcvctrlpipe(dev->udev, 0),
+ cmd,
+ USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ value,
+ index,
+ data,
+ size,
+ USB_CTRL_GET_TIMEOUT);
+}
+
+static int asix_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
+ u16 size, void *data)
+{
+ devdbg(dev,"asix_write_cmd() cmd=0x%02x value=0x%04x index=0x%04x size=%d",
+ cmd, value, index, size);
+ return usb_control_msg(
+ dev->udev,
+ usb_sndctrlpipe(dev->udev, 0),
+ cmd,
+ USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ value,
+ index,
+ data,
+ size,
+ USB_CTRL_SET_TIMEOUT);
+}
+
+static void asix_async_cmd_callback(struct urb *urb)
+{
+ struct usb_ctrlrequest *req = (struct usb_ctrlrequest *)urb->context;
+
+ if (urb->status < 0)
+ printk(KERN_DEBUG "asix_async_cmd_callback() failed with %d",
+ urb->status);
+
+ kfree(req);
+ usb_free_urb(urb);
+}
+
+static void
+asix_write_cmd_async(struct usbnet *dev, u8 cmd, u16 value, u16 index,
+ u16 size, void *data)
+{
+ struct usb_ctrlrequest *req;
+ int status;
+ struct urb *urb;
+
+ devdbg(dev,"asix_write_cmd_async() cmd=0x%02x value=0x%04x index=0x%04x size=%d",
+ cmd, value, index, size);
+ if ((urb = usb_alloc_urb(0, GFP_ATOMIC)) == NULL) {
+ deverr(dev, "Error allocating URB in write_cmd_async!");
+ return;
+ }
+
+ if ((req = kmalloc(sizeof(struct usb_ctrlrequest), GFP_ATOMIC)) == NULL) {
+ deverr(dev, "Failed to allocate memory for control request");
+ usb_free_urb(urb);
+ return;
+ }
+
+ req->bRequestType = USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE;
+ req->bRequest = cmd;
+ req->wValue = cpu_to_le16(value);
+ req->wIndex = cpu_to_le16(index);
+ req->wLength = cpu_to_le16(size);
+
+ usb_fill_control_urb(urb, dev->udev,
+ usb_sndctrlpipe(dev->udev, 0),
+ (void *)req, data, size,
+ asix_async_cmd_callback, req);
+
+ if((status = usb_submit_urb(urb, GFP_ATOMIC)) < 0) {
+ deverr(dev, "Error submitting the control message: status=%d",
+ status);
+ kfree(req);
+ usb_free_urb(urb);
+ }
+}
+
+static int asix_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
+{
+ u8 *head;
+ u32 header;
+ char *packet;
+ struct sk_buff *ax_skb;
+ u16 size;
+
+ head = (u8 *) skb->data;
+ memcpy(&header, head, sizeof(header));
+ le32_to_cpus(&header);
+ packet = head + sizeof(header);
+
+ skb_pull(skb, 4);
+
+ while (skb->len > 0) {
+ if ((short)(header & 0x0000ffff) !=
+ ~((short)((header & 0xffff0000) >> 16))) {
+ deverr(dev,"asix_rx_fixup() Bad Header Length");
+ }
+ /* get the packet length */
+ size = (u16) (header & 0x0000ffff);
+
+ if ((skb->len) - ((size + 1) & 0xfffe) == 0)
+ return 2;
+ if (size > ETH_FRAME_LEN) {
+ deverr(dev,"asix_rx_fixup() Bad RX Length %d", size);
+ return 0;
+ }
+ ax_skb = skb_clone(skb, GFP_ATOMIC);
+ if (ax_skb) {
+ ax_skb->len = size;
+ ax_skb->data = packet;
+ skb_set_tail_pointer(ax_skb, size);
+ usbnet_skb_return(dev, ax_skb);
+ } else {
+ return 0;
+ }
+
+ skb_pull(skb, (size + 1) & 0xfffe);
+
+ if (skb->len == 0)
+ break;
+
+ head = (u8 *) skb->data;
+ memcpy(&header, head, sizeof(header));
+ le32_to_cpus(&header);
+ packet = head + sizeof(header);
+ skb_pull(skb, 4);
+ }
+
+ if (skb->len < 0) {
+ deverr(dev,"asix_rx_fixup() Bad SKB Length %d", skb->len);
+ return 0;
+ }
+ return 1;
+}
+
+static struct sk_buff *asix_tx_fixup(struct usbnet *dev, struct sk_buff *skb,
+ gfp_t flags)
+{
+ int padlen;
+ int headroom = skb_headroom(skb);
+ int tailroom = skb_tailroom(skb);
+ u32 packet_len;
+ u32 padbytes = 0xffff0000;
+
+ padlen = ((skb->len + 4) % 512) ? 0 : 4;
+
+ if ((!skb_cloned(skb))
+ && ((headroom + tailroom) >= (4 + padlen))) {
+ if ((headroom < 4) || (tailroom < padlen)) {
+ skb->data = memmove(skb->head + 4, skb->data, skb->len);
+ skb_set_tail_pointer(skb, skb->len);
+ }
+ } else {
+ struct sk_buff *skb2;
+ skb2 = skb_copy_expand(skb, 4, padlen, flags);
+ dev_kfree_skb_any(skb);
+ skb = skb2;
+ if (!skb)
+ return NULL;
+ }
+
+ skb_push(skb, 4);
+ packet_len = (((skb->len - 4) ^ 0x0000ffff) << 16) + (skb->len - 4);
+ cpu_to_le32s(&packet_len);
+ skb_copy_to_linear_data(skb, &packet_len, sizeof(packet_len));
+
+ if ((skb->len % 512) == 0) {
+ cpu_to_le32s(&padbytes);
+ memcpy(skb_tail_pointer(skb), &padbytes, sizeof(padbytes));
+ skb_put(skb, sizeof(padbytes));
+ }
+ return skb;
+}
+
+static void asix_status(struct usbnet *dev, struct urb *urb)
+{
+ struct ax88172_int_data *event;
+ int link;
+
+ if (urb->actual_length < 8)
+ return;
+
+ event = urb->transfer_buffer;
+ link = event->link & 0x01;
+ if (netif_carrier_ok(dev->net) != link) {
+ if (link) {
+ netif_carrier_on(dev->net);
+ usbnet_defer_kevent (dev, EVENT_LINK_RESET );
+ } else
+ netif_carrier_off(dev->net);
+ devdbg(dev, "Link Status is: %d", link);
+ }
+}
+
+static inline int asix_set_sw_mii(struct usbnet *dev)
+{
+ int ret;
+ ret = asix_write_cmd(dev, AX_CMD_SET_SW_MII, 0x0000, 0, 0, NULL);
+ if (ret < 0)
+ deverr(dev, "Failed to enable software MII access");
+ return ret;
+}
+
+static inline int asix_set_hw_mii(struct usbnet *dev)
+{
+ int ret;
+ ret = asix_write_cmd(dev, AX_CMD_SET_HW_MII, 0x0000, 0, 0, NULL);
+ if (ret < 0)
+ deverr(dev, "Failed to enable hardware MII access");
+ return ret;
+}
+
+static inline int asix_get_phy_addr(struct usbnet *dev)
+{
+ int ret = 0;
+ void *buf;
+
+ devdbg(dev, "asix_get_phy_addr()");
+
+ buf = kmalloc(2, GFP_KERNEL);
+ if (!buf)
+ goto out1;
+
+ if ((ret = asix_read_cmd(dev, AX_CMD_READ_PHY_ID,
+ 0, 0, 2, buf)) < 2) {
+ deverr(dev, "Error reading PHYID register: %02x", ret);
+ goto out2;
+ }
+ devdbg(dev, "asix_get_phy_addr() returning 0x%04x", *((u16 *)buf));
+ ret = *((u8 *)buf + 1);
+out2:
+ kfree(buf);
+out1:
+ return ret;
+}
+
+static int asix_sw_reset(struct usbnet *dev, u8 flags)
+{
+ int ret;
+
+ ret = asix_write_cmd(dev, AX_CMD_SW_RESET, flags, 0, 0, NULL);
+ if (ret < 0)
+ deverr(dev,"Failed to send software reset: %02x", ret);
+
+ return ret;
+}
+
+static u16 asix_read_rx_ctl(struct usbnet *dev)
+{
+ u16 ret = 0;
+ void *buf;
+
+ buf = kmalloc(2, GFP_KERNEL);
+ if (!buf)
+ goto out1;
+
+ if ((ret = asix_read_cmd(dev, AX_CMD_READ_RX_CTL,
+ 0, 0, 2, buf)) < 2) {
+ deverr(dev, "Error reading RX_CTL register: %02x", ret);
+ goto out2;
+ }
+ ret = le16_to_cpu(*((u16 *)buf));
+out2:
+ kfree(buf);
+out1:
+ return ret;
+}
+
+static int asix_write_rx_ctl(struct usbnet *dev, u16 mode)
+{
+ int ret;
+
+ devdbg(dev,"asix_write_rx_ctl() - mode = 0x%04x", mode);
+ ret = asix_write_cmd(dev, AX_CMD_WRITE_RX_CTL, mode, 0, 0, NULL);
+ if (ret < 0)
+ deverr(dev, "Failed to write RX_CTL mode to 0x%04x: %02x",
+ mode, ret);
+
+ return ret;
+}
+
+static u16 asix_read_medium_status(struct usbnet *dev)
+{
+ u16 ret = 0;
+ void *buf;
+
+ buf = kmalloc(2, GFP_KERNEL);
+ if (!buf)
+ goto out1;
+
+ if ((ret = asix_read_cmd(dev, AX_CMD_READ_MEDIUM_STATUS,
+ 0, 0, 2, buf)) < 2) {
+ deverr(dev, "Error reading Medium Status register: %02x", ret);
+ goto out2;
+ }
+ ret = le16_to_cpu(*((u16 *)buf));
+out2:
+ kfree(buf);
+out1:
+ return ret;
+}
+
+static int asix_write_medium_mode(struct usbnet *dev, u16 mode)
+{
+ int ret;
+
+ devdbg(dev,"asix_write_medium_mode() - mode = 0x%04x", mode);
+ ret = asix_write_cmd(dev, AX_CMD_WRITE_MEDIUM_MODE, mode, 0, 0, NULL);
+ if (ret < 0)
+ deverr(dev, "Failed to write Medium Mode mode to 0x%04x: %02x",
+ mode, ret);
+
+ return ret;
+}
+
+static int asix_write_gpio(struct usbnet *dev, u16 value, int sleep)
+{
+ int ret;
+
+ devdbg(dev,"asix_write_gpio() - value = 0x%04x", value);
+ ret = asix_write_cmd(dev, AX_CMD_WRITE_GPIOS, value, 0, 0, NULL);
+ if (ret < 0)
+ deverr(dev, "Failed to write GPIO value 0x%04x: %02x",
+ value, ret);
+
+ if (sleep)
+ msleep(sleep);
+
+ return ret;
+}
+
+/*
+ * AX88772 & AX88178 have a 16-bit RX_CTL value
+ */
+static void asix_set_multicast(struct net_device *net)
+{
+ struct usbnet *dev = netdev_priv(net);
+ struct asix_data *data = (struct asix_data *)&dev->data;
+ u16 rx_ctl = AX_DEFAULT_RX_CTL;
+
+ if (net->flags & IFF_PROMISC) {
+ rx_ctl |= AX_RX_CTL_PRO;
+ } else if (net->flags & IFF_ALLMULTI
+ || net->mc_count > AX_MAX_MCAST) {
+ rx_ctl |= AX_RX_CTL_AMALL;
+ } else if (net->mc_count == 0) {
+ /* just broadcast and directed */
+ } else {
+ /* We use the 20 byte dev->data
+ * for our 8 byte filter buffer
+ * to avoid allocating memory that
+ * is tricky to free later */
+ struct dev_mc_list *mc_list = net->mc_list;
+ u32 crc_bits;
+ int i;
+
+ memset(data->multi_filter, 0, AX_MCAST_FILTER_SIZE);
+
+ /* Build the multicast hash filter. */
+ for (i = 0; i < net->mc_count; i++) {
+ crc_bits =
+ ether_crc(ETH_ALEN,
+ mc_list->dmi_addr) >> 26;
+ data->multi_filter[crc_bits >> 3] |=
+ 1 << (crc_bits & 7);
+ mc_list = mc_list->next;
+ }
+
+ asix_write_cmd_async(dev, AX_CMD_WRITE_MULTI_FILTER, 0, 0,
+ AX_MCAST_FILTER_SIZE, data->multi_filter);
+
+ rx_ctl |= AX_RX_CTL_AM;
+ }
+
+ asix_write_cmd_async(dev, AX_CMD_WRITE_RX_CTL, rx_ctl, 0, 0, NULL);
+}
+
+static int asix_mdio_read(struct net_device *netdev, int phy_id, int loc)
+{
+ struct usbnet *dev = netdev_priv(netdev);
+ u16 res;
+
+ mutex_lock(&dev->phy_mutex);
+ asix_set_sw_mii(dev);
+ asix_read_cmd(dev, AX_CMD_READ_MII_REG, phy_id,
+ (__u16)loc, 2, (u16 *)&res);
+ asix_set_hw_mii(dev);
+ mutex_unlock(&dev->phy_mutex);
+
+ devdbg(dev, "asix_mdio_read() phy_id=0x%02x, loc=0x%02x, returns=0x%04x", phy_id, loc, le16_to_cpu(res & 0xffff));
+
+ return le16_to_cpu(res & 0xffff);
+}
+
+static void
+asix_mdio_write(struct net_device *netdev, int phy_id, int loc, int val)
+{
+ struct usbnet *dev = netdev_priv(netdev);
+ u16 res = cpu_to_le16(val);
+
+ devdbg(dev, "asix_mdio_write() phy_id=0x%02x, loc=0x%02x, val=0x%04x", phy_id, loc, val);
+ mutex_lock(&dev->phy_mutex);
+ asix_set_sw_mii(dev);
+ asix_write_cmd(dev, AX_CMD_WRITE_MII_REG, phy_id,
+ (__u16)loc, 2, (u16 *)&res);
+ asix_set_hw_mii(dev);
+ mutex_unlock(&dev->phy_mutex);
+}
+
+/* Get the PHY Identifier from the PHYSID1 & PHYSID2 MII registers */
+static u32 asix_get_phyid(struct usbnet *dev)
+{
+ int phy_reg;
+ u32 phy_id;
+
+ phy_reg = asix_mdio_read(dev->net, dev->mii.phy_id, MII_PHYSID1);
+ if (phy_reg < 0)
+ return 0;
+
+ phy_id = (phy_reg & 0xffff) << 16;
+
+ phy_reg = asix_mdio_read(dev->net, dev->mii.phy_id, MII_PHYSID2);
+ if (phy_reg < 0)
+ return 0;
+
+ phy_id |= (phy_reg & 0xffff);
+
+ return phy_id;
+}
+
+static void
+asix_get_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
+{
+ struct usbnet *dev = netdev_priv(net);
+ u8 opt;
+
+ if (asix_read_cmd(dev, AX_CMD_READ_MONITOR_MODE, 0, 0, 1, &opt) < 0) {
+ wolinfo->supported = 0;
+ wolinfo->wolopts = 0;
+ return;
+ }
+ wolinfo->supported = WAKE_PHY | WAKE_MAGIC;
+ wolinfo->wolopts = 0;
+ if (opt & AX_MONITOR_MODE) {
+ if (opt & AX_MONITOR_LINK)
+ wolinfo->wolopts |= WAKE_PHY;
+ if (opt & AX_MONITOR_MAGIC)
+ wolinfo->wolopts |= WAKE_MAGIC;
+ }
+}
+
+static int
+asix_set_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
+{
+ struct usbnet *dev = netdev_priv(net);
+ u8 opt = 0;
+ u8 buf[1];
+
+ if (wolinfo->wolopts & WAKE_PHY)
+ opt |= AX_MONITOR_LINK;
+ if (wolinfo->wolopts & WAKE_MAGIC)
+ opt |= AX_MONITOR_MAGIC;
+ if (opt != 0)
+ opt |= AX_MONITOR_MODE;
+
+ if (asix_write_cmd(dev, AX_CMD_WRITE_MONITOR_MODE,
+ opt, 0, 0, &buf) < 0)
+ return -EINVAL;
+
+ return 0;
+}
+
+static int asix_get_eeprom_len(struct net_device *net)
+{
+ struct usbnet *dev = netdev_priv(net);
+ struct asix_data *data = (struct asix_data *)&dev->data;
+
+ return data->eeprom_len;
+}
+
+static int asix_get_eeprom(struct net_device *net,
+ struct ethtool_eeprom *eeprom, u8 *data)
+{
+ struct usbnet *dev = netdev_priv(net);
+ u16 *ebuf = (u16 *)data;
+ int i;
+
+ /* Crude hack to ensure that we don't overwrite memory
+ * if an odd length is supplied
+ */
+ if (eeprom->len % 2)
+ return -EINVAL;
+
+ eeprom->magic = AX_EEPROM_MAGIC;
+
+ /* ax8817x returns 2 bytes from eeprom on read */
+ for (i=0; i < eeprom->len / 2; i++) {
+ if (asix_read_cmd(dev, AX_CMD_READ_EEPROM,
+ eeprom->offset + i, 0, 2, &ebuf[i]) < 0)
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static void asix_get_drvinfo (struct net_device *net,
+ struct ethtool_drvinfo *info)
+{
+ struct usbnet *dev = netdev_priv(net);
+ struct asix_data *data = (struct asix_data *)&dev->data;
+
+ /* Inherit standard device info */
+ usbnet_get_drvinfo(net, info);
+ strncpy (info->driver, driver_name, sizeof info->driver);
+ strncpy (info->version, DRIVER_VERSION, sizeof info->version);
+ info->eedump_len = data->eeprom_len;
+}
+
+static u32 asix_get_link(struct net_device *net)
+{
+ struct usbnet *dev = netdev_priv(net);
+
+ return mii_link_ok(&dev->mii);
+}
+
+static int asix_ioctl (struct net_device *net, struct ifreq *rq, int cmd)
+{
+ struct usbnet *dev = netdev_priv(net);
+
+ return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL);
+}
+
+/* We need to override some ethtool_ops so we require our
+ own structure so we don't interfere with other usbnet
+ devices that may be connected at the same time. */
+static struct ethtool_ops ax88172_ethtool_ops = {
+ .get_drvinfo = asix_get_drvinfo,
+ .get_link = asix_get_link,
+ .get_msglevel = usbnet_get_msglevel,
+ .set_msglevel = usbnet_set_msglevel,
+ .get_wol = asix_get_wol,
+ .set_wol = asix_set_wol,
+ .get_eeprom_len = asix_get_eeprom_len,
+ .get_eeprom = asix_get_eeprom,
+ .get_settings = usbnet_get_settings,
+ .set_settings = usbnet_set_settings,
+ .nway_reset = usbnet_nway_reset,
+};
+
+static void ax88172_set_multicast(struct net_device *net)
+{
+ struct usbnet *dev = netdev_priv(net);
+ struct asix_data *data = (struct asix_data *)&dev->data;
+ u8 rx_ctl = 0x8c;
+
+ if (net->flags & IFF_PROMISC) {
+ rx_ctl |= 0x01;
+ } else if (net->flags & IFF_ALLMULTI
+ || net->mc_count > AX_MAX_MCAST) {
+ rx_ctl |= 0x02;
+ } else if (net->mc_count == 0) {
+ /* just broadcast and directed */
+ } else {
+ /* We use the 20 byte dev->data
+ * for our 8 byte filter buffer
+ * to avoid allocating memory that
+ * is tricky to free later */
+ struct dev_mc_list *mc_list = net->mc_list;
+ u32 crc_bits;
+ int i;
+
+ memset(data->multi_filter, 0, AX_MCAST_FILTER_SIZE);
+
+ /* Build the multicast hash filter. */
+ for (i = 0; i < net->mc_count; i++) {
+ crc_bits =
+ ether_crc(ETH_ALEN,
+ mc_list->dmi_addr) >> 26;
+ data->multi_filter[crc_bits >> 3] |=
+ 1 << (crc_bits & 7);
+ mc_list = mc_list->next;
+ }
+
+ asix_write_cmd_async(dev, AX_CMD_WRITE_MULTI_FILTER, 0, 0,
+ AX_MCAST_FILTER_SIZE, data->multi_filter);
+
+ rx_ctl |= 0x10;
+ }
+
+ asix_write_cmd_async(dev, AX_CMD_WRITE_RX_CTL, rx_ctl, 0, 0, NULL);
+}
+
+static int ax88172_link_reset(struct usbnet *dev)
+{
+ u8 mode;
+ struct ethtool_cmd ecmd;
+
+ mii_check_media(&dev->mii, 1, 1);
+ mii_ethtool_gset(&dev->mii, &ecmd);
+ mode = AX88172_MEDIUM_DEFAULT;
+
+ if (ecmd.duplex != DUPLEX_FULL)
+ mode |= ~AX88172_MEDIUM_FD;
+
+ devdbg(dev, "ax88172_link_reset() speed: %d duplex: %d setting mode to 0x%04x", ecmd.speed, ecmd.duplex, mode);
+
+ asix_write_medium_mode(dev, mode);
+
+ return 0;
+}
+
+static int ax88172_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+ int ret = 0;
+ void *buf;
+ int i;
+ unsigned long gpio_bits = dev->driver_info->data;
+ struct asix_data *data = (struct asix_data *)&dev->data;
+
+ data->eeprom_len = AX88172_EEPROM_LEN;
+
+ usbnet_get_endpoints(dev,intf);
+
+ buf = kmalloc(ETH_ALEN, GFP_KERNEL);
+ if(!buf) {
+ ret = -ENOMEM;
+ goto out1;
+ }
+
+ /* Toggle the GPIOs in a manufacturer/model specific way */
+ for (i = 2; i >= 0; i--) {
+ if ((ret = asix_write_cmd(dev, AX_CMD_WRITE_GPIOS,
+ (gpio_bits >> (i * 8)) & 0xff, 0, 0,
+ buf)) < 0)
+ goto out2;
+ msleep(5);
+ }
+
+ if ((ret = asix_write_rx_ctl(dev, 0x80)) < 0)
+ goto out2;
+
+ /* Get the MAC address */
+ memset(buf, 0, ETH_ALEN);
+ if ((ret = asix_read_cmd(dev, AX88172_CMD_READ_NODE_ID,
+ 0, 0, 6, buf)) < 0) {
+ dbg("read AX_CMD_READ_NODE_ID failed: %d", ret);
+ goto out2;
+ }
+ memcpy(dev->net->dev_addr, buf, ETH_ALEN);
+
+ /* Initialize MII structure */
+ dev->mii.dev = dev->net;
+ dev->mii.mdio_read = asix_mdio_read;
+ dev->mii.mdio_write = asix_mdio_write;
+ dev->mii.phy_id_mask = 0x3f;
+ dev->mii.reg_num_mask = 0x1f;
+ dev->mii.phy_id = asix_get_phy_addr(dev);
+ dev->net->do_ioctl = asix_ioctl;
+
+ dev->net->set_multicast_list = ax88172_set_multicast;
+ dev->net->ethtool_ops = &ax88172_ethtool_ops;
+
+ asix_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET);
+ asix_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE,
+ ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP);
+ mii_nway_restart(&dev->mii);
+
+ return 0;
+out2:
+ kfree(buf);
+out1:
+ return ret;
+}
+
+static struct ethtool_ops ax88772_ethtool_ops = {
+ .get_drvinfo = asix_get_drvinfo,
+ .get_link = asix_get_link,
+ .get_msglevel = usbnet_get_msglevel,
+ .set_msglevel = usbnet_set_msglevel,
+ .get_wol = asix_get_wol,
+ .set_wol = asix_set_wol,
+ .get_eeprom_len = asix_get_eeprom_len,
+ .get_eeprom = asix_get_eeprom,
+ .get_settings = usbnet_get_settings,
+ .set_settings = usbnet_set_settings,
+ .nway_reset = usbnet_nway_reset,
+};
+
+static int ax88772_link_reset(struct usbnet *dev)
+{
+ u16 mode;
+ struct ethtool_cmd ecmd;
+
+ mii_check_media(&dev->mii, 1, 1);
+ mii_ethtool_gset(&dev->mii, &ecmd);
+ mode = AX88772_MEDIUM_DEFAULT;
+
+ if (ecmd.speed != SPEED_100)
+ mode &= ~AX_MEDIUM_PS;
+
+ if (ecmd.duplex != DUPLEX_FULL)
+ mode &= ~AX_MEDIUM_FD;
+
+ devdbg(dev, "ax88772_link_reset() speed: %d duplex: %d setting mode to 0x%04x", ecmd.speed, ecmd.duplex, mode);
+
+ asix_write_medium_mode(dev, mode);
+
+ return 0;
+}
+
+static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+ int ret, embd_phy;
+ void *buf;
+ u16 rx_ctl;
+ struct asix_data *data = (struct asix_data *)&dev->data;
+ u32 phyid;
+
+ data->eeprom_len = AX88772_EEPROM_LEN;
+
+ usbnet_get_endpoints(dev,intf);
+
+ buf = kmalloc(6, GFP_KERNEL);
+ if(!buf) {
+ dbg ("Cannot allocate memory for buffer");
+ ret = -ENOMEM;
+ goto out1;
+ }
+
+ if ((ret = asix_write_gpio(dev,
+ AX_GPIO_RSE | AX_GPIO_GPO_2 | AX_GPIO_GPO2EN, 5)) < 0)
+ goto out2;
+
+ /* 0x10 is the phy id of the embedded 10/100 ethernet phy */
+ embd_phy = ((asix_get_phy_addr(dev) & 0x1f) == 0x10 ? 1 : 0);
+ if ((ret = asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT,
+ embd_phy, 0, 0, buf)) < 0) {
+ dbg("Select PHY #1 failed: %d", ret);
+ goto out2;
+ }
+
+ if ((ret = asix_sw_reset(dev, AX_SWRESET_IPPD | AX_SWRESET_PRL)) < 0)
+ goto out2;
+
+ msleep(150);
+ if ((ret = asix_sw_reset(dev, AX_SWRESET_CLEAR)) < 0)
+ goto out2;
+
+ msleep(150);
+ if (embd_phy) {
+ if ((ret = asix_sw_reset(dev, AX_SWRESET_IPRL)) < 0)
+ goto out2;
+ }
+ else {
+ if ((ret = asix_sw_reset(dev, AX_SWRESET_PRTE)) < 0)
+ goto out2;
+ }
+
+ msleep(150);
+ rx_ctl = asix_read_rx_ctl(dev);
+ dbg("RX_CTL is 0x%04x after software reset", rx_ctl);
+ if ((ret = asix_write_rx_ctl(dev, 0x0000)) < 0)
+ goto out2;
+
+ rx_ctl = asix_read_rx_ctl(dev);
+ dbg("RX_CTL is 0x%04x setting to 0x0000", rx_ctl);
+
+ /* Get the MAC address */
+ memset(buf, 0, ETH_ALEN);
+ if ((ret = asix_read_cmd(dev, AX_CMD_READ_NODE_ID,
+ 0, 0, ETH_ALEN, buf)) < 0) {
+ dbg("Failed to read MAC address: %d", ret);
+ goto out2;
+ }
+ memcpy(dev->net->dev_addr, buf, ETH_ALEN);
+
+ /* Initialize MII structure */
+ dev->mii.dev = dev->net;
+ dev->mii.mdio_read = asix_mdio_read;
+ dev->mii.mdio_write = asix_mdio_write;
+ dev->mii.phy_id_mask = 0x1f;
+ dev->mii.reg_num_mask = 0x1f;
+ dev->net->do_ioctl = asix_ioctl;
+ dev->mii.phy_id = asix_get_phy_addr(dev);
+
+ phyid = asix_get_phyid(dev);
+ dbg("PHYID=0x%08x", phyid);
+
+ if ((ret = asix_sw_reset(dev, AX_SWRESET_PRL)) < 0)
+ goto out2;
+
+ msleep(150);
+
+ if ((ret = asix_sw_reset(dev, AX_SWRESET_IPRL | AX_SWRESET_PRL)) < 0)
+ goto out2;
+
+ msleep(150);
+
+ dev->net->set_multicast_list = asix_set_multicast;
+ dev->net->ethtool_ops = &ax88772_ethtool_ops;
+
+ asix_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET);
+ asix_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE,
+ ADVERTISE_ALL | ADVERTISE_CSMA);
+ mii_nway_restart(&dev->mii);
+
+ if ((ret = asix_write_medium_mode(dev, AX88772_MEDIUM_DEFAULT)) < 0)
+ goto out2;
+
+ if ((ret = asix_write_cmd(dev, AX_CMD_WRITE_IPG0,
+ AX88772_IPG0_DEFAULT | AX88772_IPG1_DEFAULT,
+ AX88772_IPG2_DEFAULT, 0, buf)) < 0) {
+ dbg("Write IPG,IPG1,IPG2 failed: %d", ret);
+ goto out2;
+ }
+
+ /* Set RX_CTL to default values with 2k buffer, and enable cactus */
+ if ((ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL)) < 0)
+ goto out2;
+
+ rx_ctl = asix_read_rx_ctl(dev);
+ dbg("RX_CTL is 0x%04x after all initializations", rx_ctl);
+
+ rx_ctl = asix_read_medium_status(dev);
+ dbg("Medium Status is 0x%04x after all initializations", rx_ctl);
+
+ kfree(buf);
+
+ /* Asix framing packs multiple eth frames into a 2K usb bulk transfer */
+ if (dev->driver_info->flags & FLAG_FRAMING_AX) {
+ /* hard_mtu is still the default - the device does not support
+ jumbo eth frames */
+ dev->rx_urb_size = 2048;
+ }
+
+ return 0;
+
+out2:
+ kfree(buf);
+out1:
+ return ret;
+}
+
+static struct ethtool_ops ax88178_ethtool_ops = {
+ .get_drvinfo = asix_get_drvinfo,
+ .get_link = asix_get_link,
+ .get_msglevel = usbnet_get_msglevel,
+ .set_msglevel = usbnet_set_msglevel,
+ .get_wol = asix_get_wol,
+ .set_wol = asix_set_wol,
+ .get_eeprom_len = asix_get_eeprom_len,
+ .get_eeprom = asix_get_eeprom,
+ .get_settings = usbnet_get_settings,
+ .set_settings = usbnet_set_settings,
+ .nway_reset = usbnet_nway_reset,
+};
+
+static int marvell_phy_init(struct usbnet *dev)
+{
+ struct asix_data *data = (struct asix_data *)&dev->data;
+ u16 reg;
+
+ devdbg(dev,"marvell_phy_init()");
+
+ reg = asix_mdio_read(dev->net, dev->mii.phy_id, MII_MARVELL_STATUS);
+ devdbg(dev,"MII_MARVELL_STATUS = 0x%04x", reg);
+
+ asix_mdio_write(dev->net, dev->mii.phy_id, MII_MARVELL_CTRL,
+ MARVELL_CTRL_RXDELAY | MARVELL_CTRL_TXDELAY);
+
+ if (data->ledmode) {
+ reg = asix_mdio_read(dev->net, dev->mii.phy_id,
+ MII_MARVELL_LED_CTRL);
+ devdbg(dev,"MII_MARVELL_LED_CTRL (1) = 0x%04x", reg);
+
+ reg &= 0xf8ff;
+ reg |= (1 + 0x0100);
+ asix_mdio_write(dev->net, dev->mii.phy_id,
+ MII_MARVELL_LED_CTRL, reg);
+
+ reg = asix_mdio_read(dev->net, dev->mii.phy_id,
+ MII_MARVELL_LED_CTRL);
+ devdbg(dev,"MII_MARVELL_LED_CTRL (2) = 0x%04x", reg);
+ reg &= 0xfc0f;
+ }
+
+ return 0;
+}
+
+static int marvell_led_status(struct usbnet *dev, u16 speed)
+{
+ u16 reg = asix_mdio_read(dev->net, dev->mii.phy_id, MARVELL_LED_MANUAL);
+
+ devdbg(dev, "marvell_led_status() read 0x%04x", reg);
+
+ /* Clear out the center LED bits - 0x03F0 */
+ reg &= 0xfc0f;
+
+ switch (speed) {
+ case SPEED_1000:
+ reg |= 0x03e0;
+ break;
+ case SPEED_100:
+ reg |= 0x03b0;
+ break;
+ default:
+ reg |= 0x02f0;
+ }
+
+ devdbg(dev, "marvell_led_status() writing 0x%04x", reg);
+ asix_mdio_write(dev->net, dev->mii.phy_id, MARVELL_LED_MANUAL, reg);
+
+ return 0;
+}
+
+static int ax88178_link_reset(struct usbnet *dev)
+{
+ u16 mode;
+ struct ethtool_cmd ecmd;
+ struct asix_data *data = (struct asix_data *)&dev->data;
+
+ devdbg(dev,"ax88178_link_reset()");
+
+ mii_check_media(&dev->mii, 1, 1);
+ mii_ethtool_gset(&dev->mii, &ecmd);
+ mode = AX88178_MEDIUM_DEFAULT;
+
+ if (ecmd.speed == SPEED_1000)
+ mode |= AX_MEDIUM_GM | AX_MEDIUM_ENCK;
+ else if (ecmd.speed == SPEED_100)
+ mode |= AX_MEDIUM_PS;
+ else
+ mode &= ~(AX_MEDIUM_PS | AX_MEDIUM_GM);
+
+ if (ecmd.duplex == DUPLEX_FULL)
+ mode |= AX_MEDIUM_FD;
+ else
+ mode &= ~AX_MEDIUM_FD;
+
+ devdbg(dev, "ax88178_link_reset() speed: %d duplex: %d setting mode to 0x%04x", ecmd.speed, ecmd.duplex, mode);
+
+ asix_write_medium_mode(dev, mode);
+
+ if (data->phymode == PHY_MODE_MARVELL && data->ledmode)
+ marvell_led_status(dev, ecmd.speed);
+
+ return 0;
+}
+
+static void ax88178_set_mfb(struct usbnet *dev)
+{
+ u16 mfb = AX_RX_CTL_MFB_16384;
+ u16 rxctl;
+ u16 medium;
+ int old_rx_urb_size = dev->rx_urb_size;
+
+ if (dev->hard_mtu < 2048) {
+ dev->rx_urb_size = 2048;
+ mfb = AX_RX_CTL_MFB_2048;
+ } else if (dev->hard_mtu < 4096) {
+ dev->rx_urb_size = 4096;
+ mfb = AX_RX_CTL_MFB_4096;
+ } else if (dev->hard_mtu < 8192) {
+ dev->rx_urb_size = 8192;
+ mfb = AX_RX_CTL_MFB_8192;
+ } else if (dev->hard_mtu < 16384) {
+ dev->rx_urb_size = 16384;
+ mfb = AX_RX_CTL_MFB_16384;
+ }
+
+ rxctl = asix_read_rx_ctl(dev);
+ asix_write_rx_ctl(dev, (rxctl & ~AX_RX_CTL_MFB_16384) | mfb);
+
+ medium = asix_read_medium_status(dev);
+ if (dev->net->mtu > 1500)
+ medium |= AX_MEDIUM_JFE;
+ else
+ medium &= ~AX_MEDIUM_JFE;
+ asix_write_medium_mode(dev, medium);
+
+ if (dev->rx_urb_size > old_rx_urb_size)
+ usbnet_unlink_rx_urbs(dev);
+}
+
+static int ax88178_change_mtu(struct net_device *net, int new_mtu)
+{
+ struct usbnet *dev = netdev_priv(net);
+ int ll_mtu = new_mtu + net->hard_header_len + 4;
+
+ devdbg(dev, "ax88178_change_mtu() new_mtu=%d", new_mtu);
+
+ if (new_mtu <= 0 || ll_mtu > 16384)
+ return -EINVAL;
+
+ if ((ll_mtu % dev->maxpacket) == 0)
+ return -EDOM;
+
+ net->mtu = new_mtu;
+ dev->hard_mtu = net->mtu + net->hard_header_len;
+ ax88178_set_mfb(dev);
+
+ return 0;
+}
+
+static int ax88178_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+ struct asix_data *data = (struct asix_data *)&dev->data;
+ int ret;
+ void *buf;
+ u16 eeprom;
+ int gpio0 = 0;
+ u32 phyid;
+
+ usbnet_get_endpoints(dev,intf);
+
+ buf = kmalloc(6, GFP_KERNEL);
+ if(!buf) {
+ dbg ("Cannot allocate memory for buffer");
+ ret = -ENOMEM;
+ goto out1;
+ }
+
+ eeprom = 0;
+ asix_read_cmd(dev, AX_CMD_READ_GPIOS, 0, 0, 1, &eeprom);
+ dbg("GPIO Status: 0x%04x", eeprom);
+
+ asix_write_cmd(dev, AX_CMD_WRITE_ENABLE, 0, 0, 0, NULL);
+ asix_read_cmd(dev, AX_CMD_READ_EEPROM, 0x0017, 0, 2, &eeprom);
+ asix_write_cmd(dev, AX_CMD_WRITE_DISABLE, 0, 0, 0, NULL);
+
+ dbg("EEPROM index 0x17 is 0x%04x", eeprom);
+
+ if (eeprom == 0xffff) {
+ data->phymode = PHY_MODE_MARVELL;
+ data->ledmode = 0;
+ gpio0 = 1;
+ } else {
+ data->phymode = eeprom & 7;
+ data->ledmode = eeprom >> 8;
+ gpio0 = (eeprom & 0x80) ? 0 : 1;
+ }
+ dbg("GPIO0: %d, PhyMode: %d", gpio0, data->phymode);
+
+ asix_write_gpio(dev, AX_GPIO_RSE | AX_GPIO_GPO_1 | AX_GPIO_GPO1EN, 40);
+ if ((eeprom >> 8) != 1) {
+ asix_write_gpio(dev, 0x003c, 30);
+ asix_write_gpio(dev, 0x001c, 300);
+ asix_write_gpio(dev, 0x003c, 30);
+ } else {
+ dbg("gpio phymode == 1 path");
+ asix_write_gpio(dev, AX_GPIO_GPO1EN, 30);
+ asix_write_gpio(dev, AX_GPIO_GPO1EN | AX_GPIO_GPO_1, 30);
+ }
+
+ asix_sw_reset(dev, 0);
+ msleep(150);
+
+ asix_sw_reset(dev, AX_SWRESET_PRL | AX_SWRESET_IPPD);
+ msleep(150);
+
+ asix_write_rx_ctl(dev, 0);
+
+ /* Get the MAC address */
+ memset(buf, 0, ETH_ALEN);
+ if ((ret = asix_read_cmd(dev, AX_CMD_READ_NODE_ID,
+ 0, 0, ETH_ALEN, buf)) < 0) {
+ dbg("Failed to read MAC address: %d", ret);
+ goto out2;
+ }
+ memcpy(dev->net->dev_addr, buf, ETH_ALEN);
+
+ /* Initialize MII structure */
+ dev->mii.dev = dev->net;
+ dev->mii.mdio_read = asix_mdio_read;
+ dev->mii.mdio_write = asix_mdio_write;
+ dev->mii.phy_id_mask = 0x1f;
+ dev->mii.reg_num_mask = 0xff;
+ dev->mii.supports_gmii = 1;
+ dev->net->do_ioctl = asix_ioctl;
+ dev->mii.phy_id = asix_get_phy_addr(dev);
+ dev->net->set_multicast_list = asix_set_multicast;
+ dev->net->ethtool_ops = &ax88178_ethtool_ops;
+ dev->net->change_mtu = &ax88178_change_mtu;
+
+ phyid = asix_get_phyid(dev);
+ dbg("PHYID=0x%08x", phyid);
+
+ if (data->phymode == PHY_MODE_MARVELL) {
+ marvell_phy_init(dev);
+ msleep(60);
+ }
+
+ asix_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR,
+ BMCR_RESET | BMCR_ANENABLE);
+ asix_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE,
+ ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP);
+ asix_mdio_write(dev->net, dev->mii.phy_id, MII_CTRL1000,
+ ADVERTISE_1000FULL);
+
+ mii_nway_restart(&dev->mii);
+
+ if ((ret = asix_write_medium_mode(dev, AX88178_MEDIUM_DEFAULT)) < 0)
+ goto out2;
+
+ if ((ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL)) < 0)
+ goto out2;
+
+ kfree(buf);
+
+ /* Asix framing packs multiple eth frames into a 2K usb bulk transfer */
+ if (dev->driver_info->flags & FLAG_FRAMING_AX) {
+ /* hard_mtu is still the default - the device does not support
+ jumbo eth frames */
+ dev->rx_urb_size = 2048;
+ }
+
+ return 0;
+
+out2:
+ kfree(buf);
+out1:
+ return ret;
+}
+
+static const struct driver_info ax8817x_info = {
+ .description = "ASIX AX8817x USB 2.0 Ethernet",
+ .bind = ax88172_bind,
+ .status = asix_status,
+ .link_reset = ax88172_link_reset,
+ .reset = ax88172_link_reset,
+ .flags = FLAG_ETHER,
+ .data = 0x00130103,
+};
+
+static const struct driver_info dlink_dub_e100_info = {
+ .description = "DLink DUB-E100 USB Ethernet",
+ .bind = ax88172_bind,
+ .status = asix_status,
+ .link_reset = ax88172_link_reset,
+ .reset = ax88172_link_reset,
+ .flags = FLAG_ETHER,
+ .data = 0x009f9d9f,
+};
+
+static const struct driver_info netgear_fa120_info = {
+ .description = "Netgear FA-120 USB Ethernet",
+ .bind = ax88172_bind,
+ .status = asix_status,
+ .link_reset = ax88172_link_reset,
+ .reset = ax88172_link_reset,
+ .flags = FLAG_ETHER,
+ .data = 0x00130103,
+};
+
+static const struct driver_info hawking_uf200_info = {
+ .description = "Hawking UF200 USB Ethernet",
+ .bind = ax88172_bind,
+ .status = asix_status,
+ .link_reset = ax88172_link_reset,
+ .reset = ax88172_link_reset,
+ .flags = FLAG_ETHER,
+ .data = 0x001f1d1f,
+};
+
+static const struct driver_info ax88772_info = {
+ .description = "ASIX AX88772 USB 2.0 Ethernet",
+ .bind = ax88772_bind,
+ .status = asix_status,
+ .link_reset = ax88772_link_reset,
+ .reset = ax88772_link_reset,
+ .flags = FLAG_ETHER | FLAG_FRAMING_AX,
+ .rx_fixup = asix_rx_fixup,
+ .tx_fixup = asix_tx_fixup,
+};
+
+static const struct driver_info ax88178_info = {
+ .description = "ASIX AX88178 USB 2.0 Ethernet",
+ .bind = ax88178_bind,
+ .status = asix_status,
+ .link_reset = ax88178_link_reset,
+ .reset = ax88178_link_reset,
+ .flags = FLAG_ETHER | FLAG_FRAMING_AX,
+ .rx_fixup = asix_rx_fixup,
+ .tx_fixup = asix_tx_fixup,
+};
+
+static const struct usb_device_id products [] = {
+{
+ // Linksys USB200M
+ USB_DEVICE (0x077b, 0x2226),
+ .driver_info = (unsigned long) &ax8817x_info,
+}, {
+ // Netgear FA120
+ USB_DEVICE (0x0846, 0x1040),
+ .driver_info = (unsigned long) &netgear_fa120_info,
+}, {
+ // DLink DUB-E100
+ USB_DEVICE (0x2001, 0x1a00),
+ .driver_info = (unsigned long) &dlink_dub_e100_info,
+}, {
+ // Intellinet, ST Lab USB Ethernet
+ USB_DEVICE (0x0b95, 0x1720),
+ .driver_info = (unsigned long) &ax8817x_info,
+}, {
+ // Hawking UF200, TrendNet TU2-ET100
+ USB_DEVICE (0x07b8, 0x420a),
+ .driver_info = (unsigned long) &hawking_uf200_info,
+}, {
+ // Billionton Systems, USB2AR
+ USB_DEVICE (0x08dd, 0x90ff),
+ .driver_info = (unsigned long) &ax8817x_info,
+}, {
+ // ATEN UC210T
+ USB_DEVICE (0x0557, 0x2009),
+ .driver_info = (unsigned long) &ax8817x_info,
+}, {
+ // Buffalo LUA-U2-KTX
+ USB_DEVICE (0x0411, 0x003d),
+ .driver_info = (unsigned long) &ax8817x_info,
+}, {
+ // Sitecom LN-029 "USB 2.0 10/100 Ethernet adapter"
+ USB_DEVICE (0x6189, 0x182d),
+ .driver_info = (unsigned long) &ax8817x_info,
+}, {
+ // corega FEther USB2-TX
+ USB_DEVICE (0x07aa, 0x0017),
+ .driver_info = (unsigned long) &ax8817x_info,
+}, {
+ // Surecom EP-1427X-2
+ USB_DEVICE (0x1189, 0x0893),
+ .driver_info = (unsigned long) &ax8817x_info,
+}, {
+ // goodway corp usb gwusb2e
+ USB_DEVICE (0x1631, 0x6200),
+ .driver_info = (unsigned long) &ax8817x_info,
+}, {
+ // JVC MP-PRX1 Port Replicator
+ USB_DEVICE (0x04f1, 0x3008),
+ .driver_info = (unsigned long) &ax8817x_info,
+}, {
+ // ASIX AX88772 10/100
+ USB_DEVICE (0x0b95, 0x7720),
+ .driver_info = (unsigned long) &ax88772_info,
+}, {
+ // ASIX AX88178 10/100/1000
+ USB_DEVICE (0x0b95, 0x1780),
+ .driver_info = (unsigned long) &ax88178_info,
+}, {
+ // Linksys USB200M Rev 2
+ USB_DEVICE (0x13b1, 0x0018),
+ .driver_info = (unsigned long) &ax88772_info,
+}, {
+ // 0Q0 cable ethernet
+ USB_DEVICE (0x1557, 0x7720),
+ .driver_info = (unsigned long) &ax88772_info,
+}, {
+ // DLink DUB-E100 H/W Ver B1
+ USB_DEVICE (0x07d1, 0x3c05),
+ .driver_info = (unsigned long) &ax88772_info,
+}, {
+ // DLink DUB-E100 H/W Ver B1 Alternate
+ USB_DEVICE (0x2001, 0x3c05),
+ .driver_info = (unsigned long) &ax88772_info,
+}, {
+ // Linksys USB1000
+ USB_DEVICE (0x1737, 0x0039),
+ .driver_info = (unsigned long) &ax88178_info,
+}, {
+ // IO-DATA ETG-US2
+ USB_DEVICE (0x04bb, 0x0930),
+ .driver_info = (unsigned long) &ax88178_info,
+},
+ { }, // END
+};
+MODULE_DEVICE_TABLE(usb, products);
+
+static struct usb_driver asix_driver = {
+ .name = "asix",
+ .id_table = products,
+ .probe = usbnet_probe,
+ .suspend = usbnet_suspend,
+ .resume = usbnet_resume,
+ .disconnect = usbnet_disconnect,
+};
+
+static int __init asix_init(void)
+{
+ return usb_register(&asix_driver);
+}
+module_init(asix_init);
+
+static void __exit asix_exit(void)
+{
+ usb_deregister(&asix_driver);
+}
+module_exit(asix_exit);
+
+MODULE_AUTHOR("David Hollis");
+MODULE_DESCRIPTION("ASIX AX8817X based USB 2.0 Ethernet Devices");
+MODULE_LICENSE("GPL");
+
diff --git a/drivers/net/usb/catc.c b/drivers/net/usb/catc.c
new file mode 100644
index 0000000..86e90c5
--- /dev/null
+++ b/drivers/net/usb/catc.c
@@ -0,0 +1,963 @@
+/*
+ * Copyright (c) 2001 Vojtech Pavlik
+ *
+ * CATC EL1210A NetMate USB Ethernet driver
+ *
+ * Sponsored by SuSE
+ *
+ * Based on the work of
+ * Donald Becker
+ *
+ * Old chipset support added by Simon Evans <spse@secret.org.uk> 2002
+ * - adds support for Belkin F5U011
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Should you need to contact me, the author, you can do so either by
+ * e-mail - mail your message to <vojtech@suse.cz>, or by paper mail:
+ * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+#include <linux/ethtool.h>
+#include <linux/crc32.h>
+#include <linux/bitops.h>
+#include <asm/uaccess.h>
+
+#undef DEBUG
+
+#include <linux/usb.h>
+
+/*
+ * Version information.
+ */
+
+#define DRIVER_VERSION "v2.8"
+#define DRIVER_AUTHOR "Vojtech Pavlik <vojtech@suse.cz>"
+#define DRIVER_DESC "CATC EL1210A NetMate USB Ethernet driver"
+#define SHORT_DRIVER_DESC "EL1210A NetMate USB Ethernet"
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+static const char driver_name[] = "catc";
+
+/*
+ * Some defines.
+ */
+
+#define STATS_UPDATE (HZ) /* Time between stats updates */
+#define TX_TIMEOUT (5*HZ) /* Max time the queue can be stopped */
+#define PKT_SZ 1536 /* Max Ethernet packet size */
+#define RX_MAX_BURST 15 /* Max packets per rx buffer (> 0, < 16) */
+#define TX_MAX_BURST 15 /* Max full sized packets per tx buffer (> 0) */
+#define CTRL_QUEUE 16 /* Max control requests in flight (power of two) */
+#define RX_PKT_SZ 1600 /* Max size of receive packet for F5U011 */
+
+/*
+ * Control requests.
+ */
+
+enum control_requests {
+ ReadMem = 0xf1,
+ GetMac = 0xf2,
+ Reset = 0xf4,
+ SetMac = 0xf5,
+ SetRxMode = 0xf5, /* F5U011 only */
+ WriteROM = 0xf8,
+ SetReg = 0xfa,
+ GetReg = 0xfb,
+ WriteMem = 0xfc,
+ ReadROM = 0xfd,
+};
+
+/*
+ * Registers.
+ */
+
+enum register_offsets {
+ TxBufCount = 0x20,
+ RxBufCount = 0x21,
+ OpModes = 0x22,
+ TxQed = 0x23,
+ RxQed = 0x24,
+ MaxBurst = 0x25,
+ RxUnit = 0x60,
+ EthStatus = 0x61,
+ StationAddr0 = 0x67,
+ EthStats = 0x69,
+ LEDCtrl = 0x81,
+};
+
+enum eth_stats {
+ TxSingleColl = 0x00,
+ TxMultiColl = 0x02,
+ TxExcessColl = 0x04,
+ RxFramErr = 0x06,
+};
+
+enum op_mode_bits {
+ Op3MemWaits = 0x03,
+ OpLenInclude = 0x08,
+ OpRxMerge = 0x10,
+ OpTxMerge = 0x20,
+ OpWin95bugfix = 0x40,
+ OpLoopback = 0x80,
+};
+
+enum rx_filter_bits {
+ RxEnable = 0x01,
+ RxPolarity = 0x02,
+ RxForceOK = 0x04,
+ RxMultiCast = 0x08,
+ RxPromisc = 0x10,
+ AltRxPromisc = 0x20, /* F5U011 uses different bit */
+};
+
+enum led_values {
+ LEDFast = 0x01,
+ LEDSlow = 0x02,
+ LEDFlash = 0x03,
+ LEDPulse = 0x04,
+ LEDLink = 0x08,
+};
+
+enum link_status {
+ LinkNoChange = 0,
+ LinkGood = 1,
+ LinkBad = 2
+};
+
+/*
+ * The catc struct.
+ */
+
+#define CTRL_RUNNING 0
+#define RX_RUNNING 1
+#define TX_RUNNING 2
+
+struct catc {
+ struct net_device *netdev;
+ struct usb_device *usbdev;
+
+ struct net_device_stats stats;
+ unsigned long flags;
+
+ unsigned int tx_ptr, tx_idx;
+ unsigned int ctrl_head, ctrl_tail;
+ spinlock_t tx_lock, ctrl_lock;
+
+ u8 tx_buf[2][TX_MAX_BURST * (PKT_SZ + 2)];
+ u8 rx_buf[RX_MAX_BURST * (PKT_SZ + 2)];
+ u8 irq_buf[2];
+ u8 ctrl_buf[64];
+ struct usb_ctrlrequest ctrl_dr;
+
+ struct timer_list timer;
+ u8 stats_buf[8];
+ u16 stats_vals[4];
+ unsigned long last_stats;
+
+ u8 multicast[64];
+
+ struct ctrl_queue {
+ u8 dir;
+ u8 request;
+ u16 value;
+ u16 index;
+ void *buf;
+ int len;
+ void (*callback)(struct catc *catc, struct ctrl_queue *q);
+ } ctrl_queue[CTRL_QUEUE];
+
+ struct urb *tx_urb, *rx_urb, *irq_urb, *ctrl_urb;
+
+ u8 is_f5u011; /* Set if device is an F5U011 */
+ u8 rxmode[2]; /* Used for F5U011 */
+ atomic_t recq_sz; /* Used for F5U011 - counter of waiting rx packets */
+};
+
+/*
+ * Useful macros.
+ */
+
+#define catc_get_mac(catc, mac) catc_ctrl_msg(catc, USB_DIR_IN, GetMac, 0, 0, mac, 6)
+#define catc_reset(catc) catc_ctrl_msg(catc, USB_DIR_OUT, Reset, 0, 0, NULL, 0)
+#define catc_set_reg(catc, reg, val) catc_ctrl_msg(catc, USB_DIR_OUT, SetReg, val, reg, NULL, 0)
+#define catc_get_reg(catc, reg, buf) catc_ctrl_msg(catc, USB_DIR_IN, GetReg, 0, reg, buf, 1)
+#define catc_write_mem(catc, addr, buf, size) catc_ctrl_msg(catc, USB_DIR_OUT, WriteMem, 0, addr, buf, size)
+#define catc_read_mem(catc, addr, buf, size) catc_ctrl_msg(catc, USB_DIR_IN, ReadMem, 0, addr, buf, size)
+
+#define f5u011_rxmode(catc, rxmode) catc_ctrl_msg(catc, USB_DIR_OUT, SetRxMode, 0, 1, rxmode, 2)
+#define f5u011_rxmode_async(catc, rxmode) catc_ctrl_async(catc, USB_DIR_OUT, SetRxMode, 0, 1, &rxmode, 2, NULL)
+#define f5u011_mchash_async(catc, hash) catc_ctrl_async(catc, USB_DIR_OUT, SetRxMode, 0, 2, &hash, 8, NULL)
+
+#define catc_set_reg_async(catc, reg, val) catc_ctrl_async(catc, USB_DIR_OUT, SetReg, val, reg, NULL, 0, NULL)
+#define catc_get_reg_async(catc, reg, cb) catc_ctrl_async(catc, USB_DIR_IN, GetReg, 0, reg, NULL, 1, cb)
+#define catc_write_mem_async(catc, addr, buf, size) catc_ctrl_async(catc, USB_DIR_OUT, WriteMem, 0, addr, buf, size, NULL)
+
+/*
+ * Receive routines.
+ */
+
+static void catc_rx_done(struct urb *urb)
+{
+ struct catc *catc = urb->context;
+ u8 *pkt_start = urb->transfer_buffer;
+ struct sk_buff *skb;
+ int pkt_len, pkt_offset = 0;
+
+ if (!catc->is_f5u011) {
+ clear_bit(RX_RUNNING, &catc->flags);
+ pkt_offset = 2;
+ }
+
+ if (urb->status) {
+ dbg("rx_done, status %d, length %d", urb->status, urb->actual_length);
+ return;
+ }
+
+ do {
+ if(!catc->is_f5u011) {
+ pkt_len = le16_to_cpup((__le16*)pkt_start);
+ if (pkt_len > urb->actual_length) {
+ catc->stats.rx_length_errors++;
+ catc->stats.rx_errors++;
+ break;
+ }
+ } else {
+ pkt_len = urb->actual_length;
+ }
+
+ if (!(skb = dev_alloc_skb(pkt_len)))
+ return;
+
+ eth_copy_and_sum(skb, pkt_start + pkt_offset, pkt_len, 0);
+ skb_put(skb, pkt_len);
+
+ skb->protocol = eth_type_trans(skb, catc->netdev);
+ netif_rx(skb);
+
+ catc->stats.rx_packets++;
+ catc->stats.rx_bytes += pkt_len;
+
+ /* F5U011 only does one packet per RX */
+ if (catc->is_f5u011)
+ break;
+ pkt_start += (((pkt_len + 1) >> 6) + 1) << 6;
+
+ } while (pkt_start - (u8 *) urb->transfer_buffer < urb->actual_length);
+
+ catc->netdev->last_rx = jiffies;
+
+ if (catc->is_f5u011) {
+ if (atomic_read(&catc->recq_sz)) {
+ int status;
+ atomic_dec(&catc->recq_sz);
+ dbg("getting extra packet");
+ urb->dev = catc->usbdev;
+ if ((status = usb_submit_urb(urb, GFP_ATOMIC)) < 0) {
+ dbg("submit(rx_urb) status %d", status);
+ }
+ } else {
+ clear_bit(RX_RUNNING, &catc->flags);
+ }
+ }
+}
+
+static void catc_irq_done(struct urb *urb)
+{
+ struct catc *catc = urb->context;
+ u8 *data = urb->transfer_buffer;
+ int status;
+ unsigned int hasdata = 0, linksts = LinkNoChange;
+
+ if (!catc->is_f5u011) {
+ hasdata = data[1] & 0x80;
+ if (data[1] & 0x40)
+ linksts = LinkGood;
+ else if (data[1] & 0x20)
+ linksts = LinkBad;
+ } else {
+ hasdata = (unsigned int)(be16_to_cpup((__be16*)data) & 0x0fff);
+ if (data[0] == 0x90)
+ linksts = LinkGood;
+ else if (data[0] == 0xA0)
+ linksts = LinkBad;
+ }
+
+ switch (urb->status) {
+ case 0: /* success */
+ break;
+ case -ECONNRESET: /* unlink */
+ case -ENOENT:
+ case -ESHUTDOWN:
+ return;
+ /* -EPIPE: should clear the halt */
+ default: /* error */
+ dbg("irq_done, status %d, data %02x %02x.", urb->status, data[0], data[1]);
+ goto resubmit;
+ }
+
+ if (linksts == LinkGood) {
+ netif_carrier_on(catc->netdev);
+ dbg("link ok");
+ }
+
+ if (linksts == LinkBad) {
+ netif_carrier_off(catc->netdev);
+ dbg("link bad");
+ }
+
+ if (hasdata) {
+ if (test_and_set_bit(RX_RUNNING, &catc->flags)) {
+ if (catc->is_f5u011)
+ atomic_inc(&catc->recq_sz);
+ } else {
+ catc->rx_urb->dev = catc->usbdev;
+ if ((status = usb_submit_urb(catc->rx_urb, GFP_ATOMIC)) < 0) {
+ err("submit(rx_urb) status %d", status);
+ }
+ }
+ }
+resubmit:
+ status = usb_submit_urb (urb, GFP_ATOMIC);
+ if (status)
+ err ("can't resubmit intr, %s-%s, status %d",
+ catc->usbdev->bus->bus_name,
+ catc->usbdev->devpath, status);
+}
+
+/*
+ * Transmit routines.
+ */
+
+static int catc_tx_run(struct catc *catc)
+{
+ int status;
+
+ if (catc->is_f5u011)
+ catc->tx_ptr = (catc->tx_ptr + 63) & ~63;
+
+ catc->tx_urb->transfer_buffer_length = catc->tx_ptr;
+ catc->tx_urb->transfer_buffer = catc->tx_buf[catc->tx_idx];
+ catc->tx_urb->dev = catc->usbdev;
+
+ if ((status = usb_submit_urb(catc->tx_urb, GFP_ATOMIC)) < 0)
+ err("submit(tx_urb), status %d", status);
+
+ catc->tx_idx = !catc->tx_idx;
+ catc->tx_ptr = 0;
+
+ catc->netdev->trans_start = jiffies;
+ return status;
+}
+
+static void catc_tx_done(struct urb *urb)
+{
+ struct catc *catc = urb->context;
+ unsigned long flags;
+ int r;
+
+ if (urb->status == -ECONNRESET) {
+ dbg("Tx Reset.");
+ urb->status = 0;
+ catc->netdev->trans_start = jiffies;
+ catc->stats.tx_errors++;
+ clear_bit(TX_RUNNING, &catc->flags);
+ netif_wake_queue(catc->netdev);
+ return;
+ }
+
+ if (urb->status) {
+ dbg("tx_done, status %d, length %d", urb->status, urb->actual_length);
+ return;
+ }
+
+ spin_lock_irqsave(&catc->tx_lock, flags);
+
+ if (catc->tx_ptr) {
+ r = catc_tx_run(catc);
+ if (unlikely(r < 0))
+ clear_bit(TX_RUNNING, &catc->flags);
+ } else {
+ clear_bit(TX_RUNNING, &catc->flags);
+ }
+
+ netif_wake_queue(catc->netdev);
+
+ spin_unlock_irqrestore(&catc->tx_lock, flags);
+}
+
+static int catc_hard_start_xmit(struct sk_buff *skb, struct net_device *netdev)
+{
+ struct catc *catc = netdev_priv(netdev);
+ unsigned long flags;
+ int r = 0;
+ char *tx_buf;
+
+ spin_lock_irqsave(&catc->tx_lock, flags);
+
+ catc->tx_ptr = (((catc->tx_ptr - 1) >> 6) + 1) << 6;
+ tx_buf = catc->tx_buf[catc->tx_idx] + catc->tx_ptr;
+ *((u16*)tx_buf) = (catc->is_f5u011) ? cpu_to_be16((u16)skb->len) : cpu_to_le16((u16)skb->len);
+ skb_copy_from_linear_data(skb, tx_buf + 2, skb->len);
+ catc->tx_ptr += skb->len + 2;
+
+ if (!test_and_set_bit(TX_RUNNING, &catc->flags)) {
+ r = catc_tx_run(catc);
+ if (r < 0)
+ clear_bit(TX_RUNNING, &catc->flags);
+ }
+
+ if ((catc->is_f5u011 && catc->tx_ptr)
+ || (catc->tx_ptr >= ((TX_MAX_BURST - 1) * (PKT_SZ + 2))))
+ netif_stop_queue(netdev);
+
+ spin_unlock_irqrestore(&catc->tx_lock, flags);
+
+ if (r >= 0) {
+ catc->stats.tx_bytes += skb->len;
+ catc->stats.tx_packets++;
+ }
+
+ dev_kfree_skb(skb);
+
+ return 0;
+}
+
+static void catc_tx_timeout(struct net_device *netdev)
+{
+ struct catc *catc = netdev_priv(netdev);
+
+ warn("Transmit timed out.");
+ usb_unlink_urb(catc->tx_urb);
+}
+
+/*
+ * Control messages.
+ */
+
+static int catc_ctrl_msg(struct catc *catc, u8 dir, u8 request, u16 value, u16 index, void *buf, int len)
+{
+ int retval = usb_control_msg(catc->usbdev,
+ dir ? usb_rcvctrlpipe(catc->usbdev, 0) : usb_sndctrlpipe(catc->usbdev, 0),
+ request, 0x40 | dir, value, index, buf, len, 1000);
+ return retval < 0 ? retval : 0;
+}
+
+static void catc_ctrl_run(struct catc *catc)
+{
+ struct ctrl_queue *q = catc->ctrl_queue + catc->ctrl_tail;
+ struct usb_device *usbdev = catc->usbdev;
+ struct urb *urb = catc->ctrl_urb;
+ struct usb_ctrlrequest *dr = &catc->ctrl_dr;
+ int status;
+
+ dr->bRequest = q->request;
+ dr->bRequestType = 0x40 | q->dir;
+ dr->wValue = cpu_to_le16(q->value);
+ dr->wIndex = cpu_to_le16(q->index);
+ dr->wLength = cpu_to_le16(q->len);
+
+ urb->pipe = q->dir ? usb_rcvctrlpipe(usbdev, 0) : usb_sndctrlpipe(usbdev, 0);
+ urb->transfer_buffer_length = q->len;
+ urb->transfer_buffer = catc->ctrl_buf;
+ urb->setup_packet = (void *) dr;
+ urb->dev = usbdev;
+
+ if (!q->dir && q->buf && q->len)
+ memcpy(catc->ctrl_buf, q->buf, q->len);
+
+ if ((status = usb_submit_urb(catc->ctrl_urb, GFP_KERNEL)))
+ err("submit(ctrl_urb) status %d", status);
+}
+
+static void catc_ctrl_done(struct urb *urb)
+{
+ struct catc *catc = urb->context;
+ struct ctrl_queue *q;
+ unsigned long flags;
+
+ if (urb->status)
+ dbg("ctrl_done, status %d, len %d.", urb->status, urb->actual_length);
+
+ spin_lock_irqsave(&catc->ctrl_lock, flags);
+
+ q = catc->ctrl_queue + catc->ctrl_tail;
+
+ if (q->dir) {
+ if (q->buf && q->len)
+ memcpy(q->buf, catc->ctrl_buf, q->len);
+ else
+ q->buf = catc->ctrl_buf;
+ }
+
+ if (q->callback)
+ q->callback(catc, q);
+
+ catc->ctrl_tail = (catc->ctrl_tail + 1) & (CTRL_QUEUE - 1);
+
+ if (catc->ctrl_head != catc->ctrl_tail)
+ catc_ctrl_run(catc);
+ else
+ clear_bit(CTRL_RUNNING, &catc->flags);
+
+ spin_unlock_irqrestore(&catc->ctrl_lock, flags);
+}
+
+static int catc_ctrl_async(struct catc *catc, u8 dir, u8 request, u16 value,
+ u16 index, void *buf, int len, void (*callback)(struct catc *catc, struct ctrl_queue *q))
+{
+ struct ctrl_queue *q;
+ int retval = 0;
+ unsigned long flags;
+
+ spin_lock_irqsave(&catc->ctrl_lock, flags);
+
+ q = catc->ctrl_queue + catc->ctrl_head;
+
+ q->dir = dir;
+ q->request = request;
+ q->value = value;
+ q->index = index;
+ q->buf = buf;
+ q->len = len;
+ q->callback = callback;
+
+ catc->ctrl_head = (catc->ctrl_head + 1) & (CTRL_QUEUE - 1);
+
+ if (catc->ctrl_head == catc->ctrl_tail) {
+ err("ctrl queue full");
+ catc->ctrl_tail = (catc->ctrl_tail + 1) & (CTRL_QUEUE - 1);
+ retval = -1;
+ }
+
+ if (!test_and_set_bit(CTRL_RUNNING, &catc->flags))
+ catc_ctrl_run(catc);
+
+ spin_unlock_irqrestore(&catc->ctrl_lock, flags);
+
+ return retval;
+}
+
+/*
+ * Statistics.
+ */
+
+static void catc_stats_done(struct catc *catc, struct ctrl_queue *q)
+{
+ int index = q->index - EthStats;
+ u16 data, last;
+
+ catc->stats_buf[index] = *((char *)q->buf);
+
+ if (index & 1)
+ return;
+
+ data = ((u16)catc->stats_buf[index] << 8) | catc->stats_buf[index + 1];
+ last = catc->stats_vals[index >> 1];
+
+ switch (index) {
+ case TxSingleColl:
+ case TxMultiColl:
+ catc->stats.collisions += data - last;
+ break;
+ case TxExcessColl:
+ catc->stats.tx_aborted_errors += data - last;
+ catc->stats.tx_errors += data - last;
+ break;
+ case RxFramErr:
+ catc->stats.rx_frame_errors += data - last;
+ catc->stats.rx_errors += data - last;
+ break;
+ }
+
+ catc->stats_vals[index >> 1] = data;
+}
+
+static void catc_stats_timer(unsigned long data)
+{
+ struct catc *catc = (void *) data;
+ int i;
+
+ for (i = 0; i < 8; i++)
+ catc_get_reg_async(catc, EthStats + 7 - i, catc_stats_done);
+
+ mod_timer(&catc->timer, jiffies + STATS_UPDATE);
+}
+
+static struct net_device_stats *catc_get_stats(struct net_device *netdev)
+{
+ struct catc *catc = netdev_priv(netdev);
+ return &catc->stats;
+}
+
+/*
+ * Receive modes. Broadcast, Multicast, Promisc.
+ */
+
+static void catc_multicast(unsigned char *addr, u8 *multicast)
+{
+ u32 crc;
+
+ crc = ether_crc_le(6, addr);
+ multicast[(crc >> 3) & 0x3f] |= 1 << (crc & 7);
+}
+
+static void catc_set_multicast_list(struct net_device *netdev)
+{
+ struct catc *catc = netdev_priv(netdev);
+ struct dev_mc_list *mc;
+ u8 broadcast[6];
+ u8 rx = RxEnable | RxPolarity | RxMultiCast;
+ int i;
+
+ memset(broadcast, 0xff, 6);
+ memset(catc->multicast, 0, 64);
+
+ catc_multicast(broadcast, catc->multicast);
+ catc_multicast(netdev->dev_addr, catc->multicast);
+
+ if (netdev->flags & IFF_PROMISC) {
+ memset(catc->multicast, 0xff, 64);
+ rx |= (!catc->is_f5u011) ? RxPromisc : AltRxPromisc;
+ }
+
+ if (netdev->flags & IFF_ALLMULTI) {
+ memset(catc->multicast, 0xff, 64);
+ } else {
+ for (i = 0, mc = netdev->mc_list; mc && i < netdev->mc_count; i++, mc = mc->next) {
+ u32 crc = ether_crc_le(6, mc->dmi_addr);
+ if (!catc->is_f5u011) {
+ catc->multicast[(crc >> 3) & 0x3f] |= 1 << (crc & 7);
+ } else {
+ catc->multicast[7-(crc >> 29)] |= 1 << ((crc >> 26) & 7);
+ }
+ }
+ }
+ if (!catc->is_f5u011) {
+ catc_set_reg_async(catc, RxUnit, rx);
+ catc_write_mem_async(catc, 0xfa80, catc->multicast, 64);
+ } else {
+ f5u011_mchash_async(catc, catc->multicast);
+ if (catc->rxmode[0] != rx) {
+ catc->rxmode[0] = rx;
+ dbg("Setting RX mode to %2.2X %2.2X", catc->rxmode[0], catc->rxmode[1]);
+ f5u011_rxmode_async(catc, catc->rxmode);
+ }
+ }
+}
+
+static void catc_get_drvinfo(struct net_device *dev,
+ struct ethtool_drvinfo *info)
+{
+ struct catc *catc = netdev_priv(dev);
+ strncpy(info->driver, driver_name, ETHTOOL_BUSINFO_LEN);
+ strncpy(info->version, DRIVER_VERSION, ETHTOOL_BUSINFO_LEN);
+ usb_make_path (catc->usbdev, info->bus_info, sizeof info->bus_info);
+}
+
+static int catc_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct catc *catc = netdev_priv(dev);
+ if (!catc->is_f5u011)
+ return -EOPNOTSUPP;
+
+ cmd->supported = SUPPORTED_10baseT_Half | SUPPORTED_TP;
+ cmd->advertising = ADVERTISED_10baseT_Half | ADVERTISED_TP;
+ cmd->speed = SPEED_10;
+ cmd->duplex = DUPLEX_HALF;
+ cmd->port = PORT_TP;
+ cmd->phy_address = 0;
+ cmd->transceiver = XCVR_INTERNAL;
+ cmd->autoneg = AUTONEG_DISABLE;
+ cmd->maxtxpkt = 1;
+ cmd->maxrxpkt = 1;
+ return 0;
+}
+
+static struct ethtool_ops ops = {
+ .get_drvinfo = catc_get_drvinfo,
+ .get_settings = catc_get_settings,
+ .get_link = ethtool_op_get_link
+};
+
+/*
+ * Open, close.
+ */
+
+static int catc_open(struct net_device *netdev)
+{
+ struct catc *catc = netdev_priv(netdev);
+ int status;
+
+ catc->irq_urb->dev = catc->usbdev;
+ if ((status = usb_submit_urb(catc->irq_urb, GFP_KERNEL)) < 0) {
+ err("submit(irq_urb) status %d", status);
+ return -1;
+ }
+
+ netif_start_queue(netdev);
+
+ if (!catc->is_f5u011)
+ mod_timer(&catc->timer, jiffies + STATS_UPDATE);
+
+ return 0;
+}
+
+static int catc_stop(struct net_device *netdev)
+{
+ struct catc *catc = netdev_priv(netdev);
+
+ netif_stop_queue(netdev);
+
+ if (!catc->is_f5u011)
+ del_timer_sync(&catc->timer);
+
+ usb_kill_urb(catc->rx_urb);
+ usb_kill_urb(catc->tx_urb);
+ usb_kill_urb(catc->irq_urb);
+ usb_kill_urb(catc->ctrl_urb);
+
+ return 0;
+}
+
+/*
+ * USB probe, disconnect.
+ */
+
+static int catc_probe(struct usb_interface *intf, const struct usb_device_id *id)
+{
+ struct usb_device *usbdev = interface_to_usbdev(intf);
+ struct net_device *netdev;
+ struct catc *catc;
+ u8 broadcast[6];
+ int i, pktsz;
+
+ if (usb_set_interface(usbdev,
+ intf->altsetting->desc.bInterfaceNumber, 1)) {
+ err("Can't set altsetting 1.");
+ return -EIO;
+ }
+
+ netdev = alloc_etherdev(sizeof(struct catc));
+ if (!netdev)
+ return -ENOMEM;
+
+ catc = netdev_priv(netdev);
+
+ netdev->open = catc_open;
+ netdev->hard_start_xmit = catc_hard_start_xmit;
+ netdev->stop = catc_stop;
+ netdev->get_stats = catc_get_stats;
+ netdev->tx_timeout = catc_tx_timeout;
+ netdev->watchdog_timeo = TX_TIMEOUT;
+ netdev->set_multicast_list = catc_set_multicast_list;
+ SET_ETHTOOL_OPS(netdev, &ops);
+
+ catc->usbdev = usbdev;
+ catc->netdev = netdev;
+
+ spin_lock_init(&catc->tx_lock);
+ spin_lock_init(&catc->ctrl_lock);
+
+ init_timer(&catc->timer);
+ catc->timer.data = (long) catc;
+ catc->timer.function = catc_stats_timer;
+
+ catc->ctrl_urb = usb_alloc_urb(0, GFP_KERNEL);
+ catc->tx_urb = usb_alloc_urb(0, GFP_KERNEL);
+ catc->rx_urb = usb_alloc_urb(0, GFP_KERNEL);
+ catc->irq_urb = usb_alloc_urb(0, GFP_KERNEL);
+ if ((!catc->ctrl_urb) || (!catc->tx_urb) ||
+ (!catc->rx_urb) || (!catc->irq_urb)) {
+ err("No free urbs available.");
+ usb_free_urb(catc->ctrl_urb);
+ usb_free_urb(catc->tx_urb);
+ usb_free_urb(catc->rx_urb);
+ usb_free_urb(catc->irq_urb);
+ free_netdev(netdev);
+ return -ENOMEM;
+ }
+
+ /* The F5U011 has the same vendor/product as the netmate but a device version of 0x130 */
+ if (le16_to_cpu(usbdev->descriptor.idVendor) == 0x0423 &&
+ le16_to_cpu(usbdev->descriptor.idProduct) == 0xa &&
+ le16_to_cpu(catc->usbdev->descriptor.bcdDevice) == 0x0130) {
+ dbg("Testing for f5u011");
+ catc->is_f5u011 = 1;
+ atomic_set(&catc->recq_sz, 0);
+ pktsz = RX_PKT_SZ;
+ } else {
+ pktsz = RX_MAX_BURST * (PKT_SZ + 2);
+ }
+
+ usb_fill_control_urb(catc->ctrl_urb, usbdev, usb_sndctrlpipe(usbdev, 0),
+ NULL, NULL, 0, catc_ctrl_done, catc);
+
+ usb_fill_bulk_urb(catc->tx_urb, usbdev, usb_sndbulkpipe(usbdev, 1),
+ NULL, 0, catc_tx_done, catc);
+
+ usb_fill_bulk_urb(catc->rx_urb, usbdev, usb_rcvbulkpipe(usbdev, 1),
+ catc->rx_buf, pktsz, catc_rx_done, catc);
+
+ usb_fill_int_urb(catc->irq_urb, usbdev, usb_rcvintpipe(usbdev, 2),
+ catc->irq_buf, 2, catc_irq_done, catc, 1);
+
+ if (!catc->is_f5u011) {
+ dbg("Checking memory size\n");
+
+ i = 0x12345678;
+ catc_write_mem(catc, 0x7a80, &i, 4);
+ i = 0x87654321;
+ catc_write_mem(catc, 0xfa80, &i, 4);
+ catc_read_mem(catc, 0x7a80, &i, 4);
+
+ switch (i) {
+ case 0x12345678:
+ catc_set_reg(catc, TxBufCount, 8);
+ catc_set_reg(catc, RxBufCount, 32);
+ dbg("64k Memory\n");
+ break;
+ default:
+ warn("Couldn't detect memory size, assuming 32k");
+ case 0x87654321:
+ catc_set_reg(catc, TxBufCount, 4);
+ catc_set_reg(catc, RxBufCount, 16);
+ dbg("32k Memory\n");
+ break;
+ }
+
+ dbg("Getting MAC from SEEROM.");
+
+ catc_get_mac(catc, netdev->dev_addr);
+
+ dbg("Setting MAC into registers.");
+
+ for (i = 0; i < 6; i++)
+ catc_set_reg(catc, StationAddr0 - i, netdev->dev_addr[i]);
+
+ dbg("Filling the multicast list.");
+
+ memset(broadcast, 0xff, 6);
+ catc_multicast(broadcast, catc->multicast);
+ catc_multicast(netdev->dev_addr, catc->multicast);
+ catc_write_mem(catc, 0xfa80, catc->multicast, 64);
+
+ dbg("Clearing error counters.");
+
+ for (i = 0; i < 8; i++)
+ catc_set_reg(catc, EthStats + i, 0);
+ catc->last_stats = jiffies;
+
+ dbg("Enabling.");
+
+ catc_set_reg(catc, MaxBurst, RX_MAX_BURST);
+ catc_set_reg(catc, OpModes, OpTxMerge | OpRxMerge | OpLenInclude | Op3MemWaits);
+ catc_set_reg(catc, LEDCtrl, LEDLink);
+ catc_set_reg(catc, RxUnit, RxEnable | RxPolarity | RxMultiCast);
+ } else {
+ dbg("Performing reset\n");
+ catc_reset(catc);
+ catc_get_mac(catc, netdev->dev_addr);
+
+ dbg("Setting RX Mode");
+ catc->rxmode[0] = RxEnable | RxPolarity | RxMultiCast;
+ catc->rxmode[1] = 0;
+ f5u011_rxmode(catc, catc->rxmode);
+ }
+ dbg("Init done.");
+ printk(KERN_INFO "%s: %s USB Ethernet at usb-%s-%s, ",
+ netdev->name, (catc->is_f5u011) ? "Belkin F5U011" : "CATC EL1210A NetMate",
+ usbdev->bus->bus_name, usbdev->devpath);
+ for (i = 0; i < 5; i++) printk("%2.2x:", netdev->dev_addr[i]);
+ printk("%2.2x.\n", netdev->dev_addr[i]);
+ usb_set_intfdata(intf, catc);
+
+ SET_NETDEV_DEV(netdev, &intf->dev);
+ if (register_netdev(netdev) != 0) {
+ usb_set_intfdata(intf, NULL);
+ usb_free_urb(catc->ctrl_urb);
+ usb_free_urb(catc->tx_urb);
+ usb_free_urb(catc->rx_urb);
+ usb_free_urb(catc->irq_urb);
+ free_netdev(netdev);
+ return -EIO;
+ }
+ return 0;
+}
+
+static void catc_disconnect(struct usb_interface *intf)
+{
+ struct catc *catc = usb_get_intfdata(intf);
+
+ usb_set_intfdata(intf, NULL);
+ if (catc) {
+ unregister_netdev(catc->netdev);
+ usb_free_urb(catc->ctrl_urb);
+ usb_free_urb(catc->tx_urb);
+ usb_free_urb(catc->rx_urb);
+ usb_free_urb(catc->irq_urb);
+ free_netdev(catc->netdev);
+ }
+}
+
+/*
+ * Module functions and tables.
+ */
+
+static struct usb_device_id catc_id_table [] = {
+ { USB_DEVICE(0x0423, 0xa) }, /* CATC Netmate, Belkin F5U011 */
+ { USB_DEVICE(0x0423, 0xc) }, /* CATC Netmate II, Belkin F5U111 */
+ { USB_DEVICE(0x08d1, 0x1) }, /* smartBridges smartNIC */
+ { }
+};
+
+MODULE_DEVICE_TABLE(usb, catc_id_table);
+
+static struct usb_driver catc_driver = {
+ .name = driver_name,
+ .probe = catc_probe,
+ .disconnect = catc_disconnect,
+ .id_table = catc_id_table,
+};
+
+static int __init catc_init(void)
+{
+ int result = usb_register(&catc_driver);
+ if (result == 0)
+ info(DRIVER_VERSION " " DRIVER_DESC);
+ return result;
+}
+
+static void __exit catc_exit(void)
+{
+ usb_deregister(&catc_driver);
+}
+
+module_init(catc_init);
+module_exit(catc_exit);
diff --git a/drivers/net/usb/cdc_ether.c b/drivers/net/usb/cdc_ether.c
new file mode 100644
index 0000000..5a21f06
--- /dev/null
+++ b/drivers/net/usb/cdc_ether.c
@@ -0,0 +1,570 @@
+/*
+ * CDC Ethernet based networking peripherals
+ * Copyright (C) 2003-2005 by David Brownell
+ * Copyright (C) 2006 by Ole Andre Vadla Ravnas (ActiveSync)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+// #define DEBUG // error path messages, extra info
+// #define VERBOSE // more; success messages
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ctype.h>
+#include <linux/ethtool.h>
+#include <linux/workqueue.h>
+#include <linux/mii.h>
+#include <linux/usb.h>
+#include <linux/usb/cdc.h>
+
+#include "usbnet.h"
+
+
+#if defined(CONFIG_USB_NET_RNDIS_HOST) || defined(CONFIG_USB_NET_RNDIS_HOST_MODULE)
+
+static int is_rndis(struct usb_interface_descriptor *desc)
+{
+ return desc->bInterfaceClass == USB_CLASS_COMM
+ && desc->bInterfaceSubClass == 2
+ && desc->bInterfaceProtocol == 0xff;
+}
+
+static int is_activesync(struct usb_interface_descriptor *desc)
+{
+ return desc->bInterfaceClass == USB_CLASS_MISC
+ && desc->bInterfaceSubClass == 1
+ && desc->bInterfaceProtocol == 1;
+}
+
+#else
+
+#define is_rndis(desc) 0
+#define is_activesync(desc) 0
+
+#endif
+
+/*
+ * probes control interface, claims data interface, collects the bulk
+ * endpoints, activates data interface (if needed), maybe sets MTU.
+ * all pure cdc, except for certain firmware workarounds, and knowing
+ * that rndis uses one different rule.
+ */
+int usbnet_generic_cdc_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+ u8 *buf = intf->cur_altsetting->extra;
+ int len = intf->cur_altsetting->extralen;
+ struct usb_interface_descriptor *d;
+ struct cdc_state *info = (void *) &dev->data;
+ int status;
+ int rndis;
+ struct usb_driver *driver = driver_of(intf);
+
+ if (sizeof dev->data < sizeof *info)
+ return -EDOM;
+
+ /* expect strict spec conformance for the descriptors, but
+ * cope with firmware which stores them in the wrong place
+ */
+ if (len == 0 && dev->udev->actconfig->extralen) {
+ /* Motorola SB4100 (and others: Brad Hards says it's
+ * from a Broadcom design) put CDC descriptors here
+ */
+ buf = dev->udev->actconfig->extra;
+ len = dev->udev->actconfig->extralen;
+ if (len)
+ dev_dbg(&intf->dev,
+ "CDC descriptors on config\n");
+ }
+
+ /* this assumes that if there's a non-RNDIS vendor variant
+ * of cdc-acm, it'll fail RNDIS requests cleanly.
+ */
+ rndis = is_rndis(&intf->cur_altsetting->desc)
+ || is_activesync(&intf->cur_altsetting->desc);
+
+ memset(info, 0, sizeof *info);
+ info->control = intf;
+ while (len > 3) {
+ if (buf [1] != USB_DT_CS_INTERFACE)
+ goto next_desc;
+
+ /* use bDescriptorSubType to identify the CDC descriptors.
+ * We expect devices with CDC header and union descriptors.
+ * For CDC Ethernet we need the ethernet descriptor.
+ * For RNDIS, ignore two (pointless) CDC modem descriptors
+ * in favor of a complicated OID-based RPC scheme doing what
+ * CDC Ethernet achieves with a simple descriptor.
+ */
+ switch (buf [2]) {
+ case USB_CDC_HEADER_TYPE:
+ if (info->header) {
+ dev_dbg(&intf->dev, "extra CDC header\n");
+ goto bad_desc;
+ }
+ info->header = (void *) buf;
+ if (info->header->bLength != sizeof *info->header) {
+ dev_dbg(&intf->dev, "CDC header len %u\n",
+ info->header->bLength);
+ goto bad_desc;
+ }
+ break;
+ case USB_CDC_ACM_TYPE:
+ /* paranoia: disambiguate a "real" vendor-specific
+ * modem interface from an RNDIS non-modem.
+ */
+ if (rndis) {
+ struct usb_cdc_acm_descriptor *d;
+
+ d = (void *) buf;
+ if (d->bmCapabilities) {
+ dev_dbg(&intf->dev,
+ "ACM capabilities %02x, "
+ "not really RNDIS?\n",
+ d->bmCapabilities);
+ goto bad_desc;
+ }
+ }
+ break;
+ case USB_CDC_UNION_TYPE:
+ if (info->u) {
+ dev_dbg(&intf->dev, "extra CDC union\n");
+ goto bad_desc;
+ }
+ info->u = (void *) buf;
+ if (info->u->bLength != sizeof *info->u) {
+ dev_dbg(&intf->dev, "CDC union len %u\n",
+ info->u->bLength);
+ goto bad_desc;
+ }
+
+ /* we need a master/control interface (what we're
+ * probed with) and a slave/data interface; union
+ * descriptors sort this all out.
+ */
+ info->control = usb_ifnum_to_if(dev->udev,
+ info->u->bMasterInterface0);
+ info->data = usb_ifnum_to_if(dev->udev,
+ info->u->bSlaveInterface0);
+ if (!info->control || !info->data) {
+ dev_dbg(&intf->dev,
+ "master #%u/%p slave #%u/%p\n",
+ info->u->bMasterInterface0,
+ info->control,
+ info->u->bSlaveInterface0,
+ info->data);
+ goto bad_desc;
+ }
+ if (info->control != intf) {
+ dev_dbg(&intf->dev, "bogus CDC Union\n");
+ /* Ambit USB Cable Modem (and maybe others)
+ * interchanges master and slave interface.
+ */
+ if (info->data == intf) {
+ info->data = info->control;
+ info->control = intf;
+ } else
+ goto bad_desc;
+ }
+
+ /* a data interface altsetting does the real i/o */
+ d = &info->data->cur_altsetting->desc;
+ if (d->bInterfaceClass != USB_CLASS_CDC_DATA) {
+ dev_dbg(&intf->dev, "slave class %u\n",
+ d->bInterfaceClass);
+ goto bad_desc;
+ }
+ break;
+ case USB_CDC_ETHERNET_TYPE:
+ if (info->ether) {
+ dev_dbg(&intf->dev, "extra CDC ether\n");
+ goto bad_desc;
+ }
+ info->ether = (void *) buf;
+ if (info->ether->bLength != sizeof *info->ether) {
+ dev_dbg(&intf->dev, "CDC ether len %u\n",
+ info->ether->bLength);
+ goto bad_desc;
+ }
+ dev->hard_mtu = le16_to_cpu(
+ info->ether->wMaxSegmentSize);
+ /* because of Zaurus, we may be ignoring the host
+ * side link address we were given.
+ */
+ break;
+ }
+next_desc:
+ len -= buf [0]; /* bLength */
+ buf += buf [0];
+ }
+
+ /* Microsoft ActiveSync based RNDIS devices lack the CDC descriptors,
+ * so we'll hard-wire the interfaces and not check for descriptors.
+ */
+ if (is_activesync(&intf->cur_altsetting->desc) && !info->u) {
+ info->control = usb_ifnum_to_if(dev->udev, 0);
+ info->data = usb_ifnum_to_if(dev->udev, 1);
+ if (!info->control || !info->data) {
+ dev_dbg(&intf->dev,
+ "activesync: master #0/%p slave #1/%p\n",
+ info->control,
+ info->data);
+ goto bad_desc;
+ }
+
+ } else if (!info->header || !info->u || (!rndis && !info->ether)) {
+ dev_dbg(&intf->dev, "missing cdc %s%s%sdescriptor\n",
+ info->header ? "" : "header ",
+ info->u ? "" : "union ",
+ info->ether ? "" : "ether ");
+ goto bad_desc;
+ }
+
+ /* claim data interface and set it up ... with side effects.
+ * network traffic can't flow until an altsetting is enabled.
+ */
+ status = usb_driver_claim_interface(driver, info->data, dev);
+ if (status < 0)
+ return status;
+ status = usbnet_get_endpoints(dev, info->data);
+ if (status < 0) {
+ /* ensure immediate exit from usbnet_disconnect */
+ usb_set_intfdata(info->data, NULL);
+ usb_driver_release_interface(driver, info->data);
+ return status;
+ }
+
+ /* status endpoint: optional for CDC Ethernet, not RNDIS (or ACM) */
+ dev->status = NULL;
+ if (info->control->cur_altsetting->desc.bNumEndpoints == 1) {
+ struct usb_endpoint_descriptor *desc;
+
+ dev->status = &info->control->cur_altsetting->endpoint [0];
+ desc = &dev->status->desc;
+ if (!usb_endpoint_is_int_in(desc)
+ || (le16_to_cpu(desc->wMaxPacketSize)
+ < sizeof(struct usb_cdc_notification))
+ || !desc->bInterval) {
+ dev_dbg(&intf->dev, "bad notification endpoint\n");
+ dev->status = NULL;
+ }
+ }
+ if (rndis && !dev->status) {
+ dev_dbg(&intf->dev, "missing RNDIS status endpoint\n");
+ usb_set_intfdata(info->data, NULL);
+ usb_driver_release_interface(driver, info->data);
+ return -ENODEV;
+ }
+ return 0;
+
+bad_desc:
+ dev_info(&dev->udev->dev, "bad CDC descriptors\n");
+ return -ENODEV;
+}
+EXPORT_SYMBOL_GPL(usbnet_generic_cdc_bind);
+
+void usbnet_cdc_unbind(struct usbnet *dev, struct usb_interface *intf)
+{
+ struct cdc_state *info = (void *) &dev->data;
+ struct usb_driver *driver = driver_of(intf);
+
+ /* disconnect master --> disconnect slave */
+ if (intf == info->control && info->data) {
+ /* ensure immediate exit from usbnet_disconnect */
+ usb_set_intfdata(info->data, NULL);
+ usb_driver_release_interface(driver, info->data);
+ info->data = NULL;
+ }
+
+ /* and vice versa (just in case) */
+ else if (intf == info->data && info->control) {
+ /* ensure immediate exit from usbnet_disconnect */
+ usb_set_intfdata(info->control, NULL);
+ usb_driver_release_interface(driver, info->control);
+ info->control = NULL;
+ }
+}
+EXPORT_SYMBOL_GPL(usbnet_cdc_unbind);
+
+
+/*-------------------------------------------------------------------------
+ *
+ * Communications Device Class, Ethernet Control model
+ *
+ * Takes two interfaces. The DATA interface is inactive till an altsetting
+ * is selected. Configuration data includes class descriptors. There's
+ * an optional status endpoint on the control interface.
+ *
+ * This should interop with whatever the 2.4 "CDCEther.c" driver
+ * (by Brad Hards) talked with, with more functionality.
+ *
+ *-------------------------------------------------------------------------*/
+
+static void dumpspeed(struct usbnet *dev, __le32 *speeds)
+{
+ if (netif_msg_timer(dev))
+ devinfo(dev, "link speeds: %u kbps up, %u kbps down",
+ __le32_to_cpu(speeds[0]) / 1000,
+ __le32_to_cpu(speeds[1]) / 1000);
+}
+
+static void cdc_status(struct usbnet *dev, struct urb *urb)
+{
+ struct usb_cdc_notification *event;
+
+ if (urb->actual_length < sizeof *event)
+ return;
+
+ /* SPEED_CHANGE can get split into two 8-byte packets */
+ if (test_and_clear_bit(EVENT_STS_SPLIT, &dev->flags)) {
+ dumpspeed(dev, (__le32 *) urb->transfer_buffer);
+ return;
+ }
+
+ event = urb->transfer_buffer;
+ switch (event->bNotificationType) {
+ case USB_CDC_NOTIFY_NETWORK_CONNECTION:
+ if (netif_msg_timer(dev))
+ devdbg(dev, "CDC: carrier %s",
+ event->wValue ? "on" : "off");
+ if (event->wValue)
+ netif_carrier_on(dev->net);
+ else
+ netif_carrier_off(dev->net);
+ break;
+ case USB_CDC_NOTIFY_SPEED_CHANGE: /* tx/rx rates */
+ if (netif_msg_timer(dev))
+ devdbg(dev, "CDC: speed change (len %d)",
+ urb->actual_length);
+ if (urb->actual_length != (sizeof *event + 8))
+ set_bit(EVENT_STS_SPLIT, &dev->flags);
+ else
+ dumpspeed(dev, (__le32 *) &event[1]);
+ break;
+ /* USB_CDC_NOTIFY_RESPONSE_AVAILABLE can happen too (e.g. RNDIS),
+ * but there are no standard formats for the response data.
+ */
+ default:
+ deverr(dev, "CDC: unexpected notification %02x!",
+ event->bNotificationType);
+ break;
+ }
+}
+
+static u8 nibble(unsigned char c)
+{
+ if (likely(isdigit(c)))
+ return c - '0';
+ c = toupper(c);
+ if (likely(isxdigit(c)))
+ return 10 + c - 'A';
+ return 0;
+}
+
+static inline int
+get_ethernet_addr(struct usbnet *dev, struct usb_cdc_ether_desc *e)
+{
+ int tmp, i;
+ unsigned char buf [13];
+
+ tmp = usb_string(dev->udev, e->iMACAddress, buf, sizeof buf);
+ if (tmp != 12) {
+ dev_dbg(&dev->udev->dev,
+ "bad MAC string %d fetch, %d\n", e->iMACAddress, tmp);
+ if (tmp >= 0)
+ tmp = -EINVAL;
+ return tmp;
+ }
+ for (i = tmp = 0; i < 6; i++, tmp += 2)
+ dev->net->dev_addr [i] =
+ (nibble(buf [tmp]) << 4) + nibble(buf [tmp + 1]);
+ return 0;
+}
+
+static int cdc_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+ int status;
+ struct cdc_state *info = (void *) &dev->data;
+
+ status = usbnet_generic_cdc_bind(dev, intf);
+ if (status < 0)
+ return status;
+
+ status = get_ethernet_addr(dev, info->ether);
+ if (status < 0) {
+ usb_set_intfdata(info->data, NULL);
+ usb_driver_release_interface(driver_of(intf), info->data);
+ return status;
+ }
+
+ /* FIXME cdc-ether has some multicast code too, though it complains
+ * in routine cases. info->ether describes the multicast support.
+ * Implement that here, manipulating the cdc filter as needed.
+ */
+ return 0;
+}
+
+static const struct driver_info cdc_info = {
+ .description = "CDC Ethernet Device",
+ .flags = FLAG_ETHER,
+ // .check_connect = cdc_check_connect,
+ .bind = cdc_bind,
+ .unbind = usbnet_cdc_unbind,
+ .status = cdc_status,
+};
+
+/*-------------------------------------------------------------------------*/
+
+
+static const struct usb_device_id products [] = {
+/*
+ * BLACKLIST !!
+ *
+ * First blacklist any products that are egregiously nonconformant
+ * with the CDC Ethernet specs. Minor braindamage we cope with; when
+ * they're not even trying, needing a separate driver is only the first
+ * of the differences to show up.
+ */
+
+#define ZAURUS_MASTER_INTERFACE \
+ .bInterfaceClass = USB_CLASS_COMM, \
+ .bInterfaceSubClass = USB_CDC_SUBCLASS_ETHERNET, \
+ .bInterfaceProtocol = USB_CDC_PROTO_NONE
+
+/* SA-1100 based Sharp Zaurus ("collie"), or compatible;
+ * wire-incompatible with true CDC Ethernet implementations.
+ * (And, it seems, needlessly so...)
+ */
+{
+ .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
+ | USB_DEVICE_ID_MATCH_DEVICE,
+ .idVendor = 0x04DD,
+ .idProduct = 0x8004,
+ ZAURUS_MASTER_INTERFACE,
+ .driver_info = 0,
+},
+
+/* PXA-25x based Sharp Zaurii. Note that it seems some of these
+ * (later models especially) may have shipped only with firmware
+ * advertising false "CDC MDLM" compatibility ... but we're not
+ * clear which models did that, so for now let's assume the worst.
+ */
+{
+ .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
+ | USB_DEVICE_ID_MATCH_DEVICE,
+ .idVendor = 0x04DD,
+ .idProduct = 0x8005, /* A-300 */
+ ZAURUS_MASTER_INTERFACE,
+ .driver_info = 0,
+}, {
+ .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
+ | USB_DEVICE_ID_MATCH_DEVICE,
+ .idVendor = 0x04DD,
+ .idProduct = 0x8006, /* B-500/SL-5600 */
+ ZAURUS_MASTER_INTERFACE,
+ .driver_info = 0,
+}, {
+ .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
+ | USB_DEVICE_ID_MATCH_DEVICE,
+ .idVendor = 0x04DD,
+ .idProduct = 0x8007, /* C-700 */
+ ZAURUS_MASTER_INTERFACE,
+ .driver_info = 0,
+}, {
+ .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
+ | USB_DEVICE_ID_MATCH_DEVICE,
+ .idVendor = 0x04DD,
+ .idProduct = 0x9031, /* C-750 C-760 */
+ ZAURUS_MASTER_INTERFACE,
+ .driver_info = 0,
+}, {
+ .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
+ | USB_DEVICE_ID_MATCH_DEVICE,
+ .idVendor = 0x04DD,
+ .idProduct = 0x9032, /* SL-6000 */
+ ZAURUS_MASTER_INTERFACE,
+ .driver_info = 0,
+}, {
+ .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
+ | USB_DEVICE_ID_MATCH_DEVICE,
+ .idVendor = 0x04DD,
+ /* reported with some C860 units */
+ .idProduct = 0x9050, /* C-860 */
+ ZAURUS_MASTER_INTERFACE,
+ .driver_info = 0,
+},
+
+/* Olympus has some models with a Zaurus-compatible option.
+ * R-1000 uses a FreeScale i.MXL cpu (ARMv4T)
+ */
+{
+ .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
+ | USB_DEVICE_ID_MATCH_DEVICE,
+ .idVendor = 0x07B4,
+ .idProduct = 0x0F02, /* R-1000 */
+ ZAURUS_MASTER_INTERFACE,
+ .driver_info = 0,
+},
+
+/*
+ * WHITELIST!!!
+ *
+ * CDC Ether uses two interfaces, not necessarily consecutive.
+ * We match the main interface, ignoring the optional device
+ * class so we could handle devices that aren't exclusively
+ * CDC ether.
+ *
+ * NOTE: this match must come AFTER entries blacklisting devices
+ * because of bugs/quirks in a given product (like Zaurus, above).
+ */
+{
+ USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ETHERNET,
+ USB_CDC_PROTO_NONE),
+ .driver_info = (unsigned long) &cdc_info,
+},
+ { }, // END
+};
+MODULE_DEVICE_TABLE(usb, products);
+
+static struct usb_driver cdc_driver = {
+ .name = "cdc_ether",
+ .id_table = products,
+ .probe = usbnet_probe,
+ .disconnect = usbnet_disconnect,
+ .suspend = usbnet_suspend,
+ .resume = usbnet_resume,
+};
+
+
+static int __init cdc_init(void)
+{
+ BUILD_BUG_ON((sizeof(((struct usbnet *)0)->data)
+ < sizeof(struct cdc_state)));
+
+ return usb_register(&cdc_driver);
+}
+module_init(cdc_init);
+
+static void __exit cdc_exit(void)
+{
+ usb_deregister(&cdc_driver);
+}
+module_exit(cdc_exit);
+
+MODULE_AUTHOR("David Brownell");
+MODULE_DESCRIPTION("USB CDC Ethernet devices");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/usb/cdc_subset.c b/drivers/net/usb/cdc_subset.c
new file mode 100644
index 0000000..bc62b01
--- /dev/null
+++ b/drivers/net/usb/cdc_subset.c
@@ -0,0 +1,344 @@
+/*
+ * Simple "CDC Subset" USB Networking Links
+ * Copyright (C) 2000-2005 by David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/module.h>
+#include <linux/kmod.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/workqueue.h>
+#include <linux/mii.h>
+#include <linux/usb.h>
+
+#include "usbnet.h"
+
+
+/*
+ * This supports simple USB network links that don't require any special
+ * framing or hardware control operations. The protocol used here is a
+ * strict subset of CDC Ethernet, with three basic differences reflecting
+ * the goal that almost any hardware should run it:
+ *
+ * - Minimal runtime control: one interface, no altsettings, and
+ * no vendor or class specific control requests. If a device is
+ * configured, it is allowed to exchange packets with the host.
+ * Fancier models would mean not working on some hardware.
+ *
+ * - Minimal manufacturing control: no IEEE "Organizationally
+ * Unique ID" required, or an EEPROMs to store one. Each host uses
+ * one random "locally assigned" Ethernet address instead, which can
+ * of course be overridden using standard tools like "ifconfig".
+ * (With 2^46 such addresses, same-net collisions are quite rare.)
+ *
+ * - There is no additional framing data for USB. Packets are written
+ * exactly as in CDC Ethernet, starting with an Ethernet header and
+ * terminated by a short packet. However, the host will never send a
+ * zero length packet; some systems can't handle those robustly.
+ *
+ * Anything that can transmit and receive USB bulk packets can implement
+ * this protocol. That includes both smart peripherals and quite a lot
+ * of "host-to-host" USB cables (which embed two devices back-to-back).
+ *
+ * Note that although Linux may use many of those host-to-host links
+ * with this "cdc_subset" framing, that doesn't mean there may not be a
+ * better approach. Handling the "other end unplugs/replugs" scenario
+ * well tends to require chip-specific vendor requests. Also, Windows
+ * peers at the other end of host-to-host cables may expect their own
+ * framing to be used rather than this "cdc_subset" model.
+ */
+
+#if defined(CONFIG_USB_EPSON2888) || defined(CONFIG_USB_ARMLINUX)
+/* PDA style devices are always connected if present */
+static int always_connected (struct usbnet *dev)
+{
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_USB_ALI_M5632
+#define HAVE_HARDWARE
+
+/*-------------------------------------------------------------------------
+ *
+ * ALi M5632 driver ... does high speed
+ *
+ * NOTE that the MS-Windows drivers for this chip use some funky and
+ * (naturally) undocumented 7-byte prefix to each packet, so this is a
+ * case where we don't currently interoperate. Also, once you unplug
+ * one end of the cable, you need to replug the other end too ... since
+ * chip docs are unavailable, there's no way to reset the relevant state
+ * short of a power cycle.
+ *
+ *-------------------------------------------------------------------------*/
+
+static const struct driver_info ali_m5632_info = {
+ .description = "ALi M5632",
+};
+
+#endif
+
+
+#ifdef CONFIG_USB_AN2720
+#define HAVE_HARDWARE
+
+/*-------------------------------------------------------------------------
+ *
+ * AnchorChips 2720 driver ... http://www.cypress.com
+ *
+ * This doesn't seem to have a way to detect whether the peer is
+ * connected, or need any reset handshaking. It's got pretty big
+ * internal buffers (handles most of a frame's worth of data).
+ * Chip data sheets don't describe any vendor control messages.
+ *
+ *-------------------------------------------------------------------------*/
+
+static const struct driver_info an2720_info = {
+ .description = "AnchorChips/Cypress 2720",
+ // no reset available!
+ // no check_connect available!
+
+ .in = 2, .out = 2, // direction distinguishes these
+};
+
+#endif /* CONFIG_USB_AN2720 */
+
+
+#ifdef CONFIG_USB_BELKIN
+#define HAVE_HARDWARE
+
+/*-------------------------------------------------------------------------
+ *
+ * Belkin F5U104 ... two NetChip 2280 devices + Atmel AVR microcontroller
+ *
+ * ... also two eTEK designs, including one sold as "Advance USBNET"
+ *
+ *-------------------------------------------------------------------------*/
+
+static const struct driver_info belkin_info = {
+ .description = "Belkin, eTEK, or compatible",
+};
+
+#endif /* CONFIG_USB_BELKIN */
+
+
+
+#ifdef CONFIG_USB_EPSON2888
+#define HAVE_HARDWARE
+
+/*-------------------------------------------------------------------------
+ *
+ * EPSON USB clients
+ *
+ * This is the same idea as Linux PDAs (below) except the firmware in the
+ * device might not be Tux-powered. Epson provides reference firmware that
+ * implements this interface. Product developers can reuse or modify that
+ * code, such as by using their own product and vendor codes.
+ *
+ * Support was from Juro Bystricky <bystricky.juro@erd.epson.com>
+ *
+ *-------------------------------------------------------------------------*/
+
+static const struct driver_info epson2888_info = {
+ .description = "Epson USB Device",
+ .check_connect = always_connected,
+
+ .in = 4, .out = 3,
+};
+
+#endif /* CONFIG_USB_EPSON2888 */
+
+
+/*-------------------------------------------------------------------------
+ *
+ * info from Jonathan McDowell <noodles@earth.li>
+ *
+ *-------------------------------------------------------------------------*/
+#ifdef CONFIG_USB_KC2190
+#define HAVE_HARDWARE
+static const struct driver_info kc2190_info = {
+ .description = "KC Technology KC-190",
+};
+#endif /* CONFIG_USB_KC2190 */
+
+
+#ifdef CONFIG_USB_ARMLINUX
+#define HAVE_HARDWARE
+
+/*-------------------------------------------------------------------------
+ *
+ * Intel's SA-1100 chip integrates basic USB support, and is used
+ * in PDAs like some iPaqs, the Yopy, some Zaurus models, and more.
+ * When they run Linux, arch/arm/mach-sa1100/usb-eth.c may be used to
+ * network using minimal USB framing data.
+ *
+ * This describes the driver currently in standard ARM Linux kernels.
+ * The Zaurus uses a different driver (see later).
+ *
+ * PXA25x and PXA210 use XScale cores (ARM v5TE) with better USB support
+ * and different USB endpoint numbering than the SA1100 devices. The
+ * mach-pxa/usb-eth.c driver re-uses the device ids from mach-sa1100
+ * so we rely on the endpoint descriptors.
+ *
+ *-------------------------------------------------------------------------*/
+
+static const struct driver_info linuxdev_info = {
+ .description = "Linux Device",
+ .check_connect = always_connected,
+};
+
+static const struct driver_info yopy_info = {
+ .description = "Yopy",
+ .check_connect = always_connected,
+};
+
+static const struct driver_info blob_info = {
+ .description = "Boot Loader OBject",
+ .check_connect = always_connected,
+};
+
+#endif /* CONFIG_USB_ARMLINUX */
+
+
+/*-------------------------------------------------------------------------*/
+
+#ifndef HAVE_HARDWARE
+#error You need to configure some hardware for this driver
+#endif
+
+/*
+ * chip vendor names won't normally be on the cables, and
+ * may not be on the device.
+ */
+
+static const struct usb_device_id products [] = {
+
+#ifdef CONFIG_USB_ALI_M5632
+{
+ USB_DEVICE (0x0402, 0x5632), // ALi defaults
+ .driver_info = (unsigned long) &ali_m5632_info,
+},
+{
+ USB_DEVICE (0x182d,0x207c), // SiteCom CN-124
+ .driver_info = (unsigned long) &ali_m5632_info,
+},
+#endif
+
+#ifdef CONFIG_USB_AN2720
+{
+ USB_DEVICE (0x0547, 0x2720), // AnchorChips defaults
+ .driver_info = (unsigned long) &an2720_info,
+}, {
+ USB_DEVICE (0x0547, 0x2727), // Xircom PGUNET
+ .driver_info = (unsigned long) &an2720_info,
+},
+#endif
+
+#ifdef CONFIG_USB_BELKIN
+{
+ USB_DEVICE (0x050d, 0x0004), // Belkin
+ .driver_info = (unsigned long) &belkin_info,
+}, {
+ USB_DEVICE (0x056c, 0x8100), // eTEK
+ .driver_info = (unsigned long) &belkin_info,
+}, {
+ USB_DEVICE (0x0525, 0x9901), // Advance USBNET (eTEK)
+ .driver_info = (unsigned long) &belkin_info,
+},
+#endif
+
+#ifdef CONFIG_USB_EPSON2888
+{
+ USB_DEVICE (0x0525, 0x2888), // EPSON USB client
+ .driver_info = (unsigned long) &epson2888_info,
+},
+#endif
+
+#ifdef CONFIG_USB_KC2190
+{
+ USB_DEVICE (0x050f, 0x0190), // KC-190
+ .driver_info = (unsigned long) &kc2190_info,
+},
+#endif
+
+#ifdef CONFIG_USB_ARMLINUX
+/*
+ * SA-1100 using standard ARM Linux kernels, or compatible.
+ * Often used when talking to Linux PDAs (iPaq, Yopy, etc).
+ * The sa-1100 "usb-eth" driver handles the basic framing.
+ *
+ * PXA25x or PXA210 ... these use a "usb-eth" driver much like
+ * the sa1100 one, but hardware uses different endpoint numbers.
+ *
+ * Or the Linux "Ethernet" gadget on hardware that can't talk
+ * CDC Ethernet (e.g., no altsettings), in either of two modes:
+ * - acting just like the old "usb-eth" firmware, though
+ * the implementation is different
+ * - supporting RNDIS as the first/default configuration for
+ * MS-Windows interop; Linux needs to use the other config
+ */
+{
+ // 1183 = 0x049F, both used as hex values?
+ // Compaq "Itsy" vendor/product id
+ USB_DEVICE (0x049F, 0x505A), // usb-eth, or compatible
+ .driver_info = (unsigned long) &linuxdev_info,
+}, {
+ USB_DEVICE (0x0E7E, 0x1001), // G.Mate "Yopy"
+ .driver_info = (unsigned long) &yopy_info,
+}, {
+ USB_DEVICE (0x8086, 0x07d3), // "blob" bootloader
+ .driver_info = (unsigned long) &blob_info,
+}, {
+ // Linux Ethernet/RNDIS gadget on pxa210/25x/26x, second config
+ // e.g. Gumstix, current OpenZaurus, ...
+ USB_DEVICE_VER (0x0525, 0xa4a2, 0x0203, 0x0203),
+ .driver_info = (unsigned long) &linuxdev_info,
+},
+#endif
+
+ { }, // END
+};
+MODULE_DEVICE_TABLE(usb, products);
+
+/*-------------------------------------------------------------------------*/
+
+static struct usb_driver cdc_subset_driver = {
+ .name = "cdc_subset",
+ .probe = usbnet_probe,
+ .suspend = usbnet_suspend,
+ .resume = usbnet_resume,
+ .disconnect = usbnet_disconnect,
+ .id_table = products,
+};
+
+static int __init cdc_subset_init(void)
+{
+ return usb_register(&cdc_subset_driver);
+}
+module_init(cdc_subset_init);
+
+static void __exit cdc_subset_exit(void)
+{
+ usb_deregister(&cdc_subset_driver);
+}
+module_exit(cdc_subset_exit);
+
+MODULE_AUTHOR("David Brownell");
+MODULE_DESCRIPTION("Simple 'CDC Subset' USB networking links");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/usb/dm9601.c b/drivers/net/usb/dm9601.c
new file mode 100644
index 0000000..a6763860
--- /dev/null
+++ b/drivers/net/usb/dm9601.c
@@ -0,0 +1,619 @@
+/*
+ * Davicom DM9601 USB 1.1 10/100Mbps ethernet devices
+ *
+ * Peter Korsgaard <jacmet@sunsite.dk>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+//#define DEBUG
+
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/stddef.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/mii.h>
+#include <linux/usb.h>
+#include <linux/crc32.h>
+
+#include "usbnet.h"
+
+/* datasheet:
+ http://www.davicom.com.tw/big5/download/Data%20Sheet/DM9601-DS-P01-930914.pdf
+*/
+
+/* control requests */
+#define DM_READ_REGS 0x00
+#define DM_WRITE_REGS 0x01
+#define DM_READ_MEMS 0x02
+#define DM_WRITE_REG 0x03
+#define DM_WRITE_MEMS 0x05
+#define DM_WRITE_MEM 0x07
+
+/* registers */
+#define DM_NET_CTRL 0x00
+#define DM_RX_CTRL 0x05
+#define DM_SHARED_CTRL 0x0b
+#define DM_SHARED_ADDR 0x0c
+#define DM_SHARED_DATA 0x0d /* low + high */
+#define DM_PHY_ADDR 0x10 /* 6 bytes */
+#define DM_MCAST_ADDR 0x16 /* 8 bytes */
+#define DM_GPR_CTRL 0x1e
+#define DM_GPR_DATA 0x1f
+
+#define DM_MAX_MCAST 64
+#define DM_MCAST_SIZE 8
+#define DM_EEPROM_LEN 256
+#define DM_TX_OVERHEAD 2 /* 2 byte header */
+#define DM_RX_OVERHEAD 7 /* 3 byte header + 4 byte crc tail */
+#define DM_TIMEOUT 1000
+
+
+static int dm_read(struct usbnet *dev, u8 reg, u16 length, void *data)
+{
+ devdbg(dev, "dm_read() reg=0x%02x length=%d", reg, length);
+ return usb_control_msg(dev->udev,
+ usb_rcvctrlpipe(dev->udev, 0),
+ DM_READ_REGS,
+ USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ 0, reg, data, length, USB_CTRL_SET_TIMEOUT);
+}
+
+static int dm_read_reg(struct usbnet *dev, u8 reg, u8 *value)
+{
+ return dm_read(dev, reg, 1, value);
+}
+
+static int dm_write(struct usbnet *dev, u8 reg, u16 length, void *data)
+{
+ devdbg(dev, "dm_write() reg=0x%02x, length=%d", reg, length);
+ return usb_control_msg(dev->udev,
+ usb_sndctrlpipe(dev->udev, 0),
+ DM_WRITE_REGS,
+ USB_DIR_OUT | USB_TYPE_VENDOR |USB_RECIP_DEVICE,
+ 0, reg, data, length, USB_CTRL_SET_TIMEOUT);
+}
+
+static int dm_write_reg(struct usbnet *dev, u8 reg, u8 value)
+{
+ devdbg(dev, "dm_write_reg() reg=0x%02x, value=0x%02x", reg, value);
+ return usb_control_msg(dev->udev,
+ usb_sndctrlpipe(dev->udev, 0),
+ DM_WRITE_REG,
+ USB_DIR_OUT | USB_TYPE_VENDOR |USB_RECIP_DEVICE,
+ value, reg, NULL, 0, USB_CTRL_SET_TIMEOUT);
+}
+
+static void dm_write_async_callback(struct urb *urb)
+{
+ struct usb_ctrlrequest *req = (struct usb_ctrlrequest *)urb->context;
+
+ if (urb->status < 0)
+ printk(KERN_DEBUG "dm_write_async_callback() failed with %d",
+ urb->status);
+
+ kfree(req);
+ usb_free_urb(urb);
+}
+
+static void dm_write_async(struct usbnet *dev, u8 reg, u16 length, void *data)
+{
+ struct usb_ctrlrequest *req;
+ struct urb *urb;
+ int status;
+
+ devdbg(dev, "dm_write_async() reg=0x%02x length=%d", reg, length);
+
+ urb = usb_alloc_urb(0, GFP_ATOMIC);
+ if (!urb) {
+ deverr(dev, "Error allocating URB in dm_write_async!");
+ return;
+ }
+
+ req = kmalloc(sizeof(struct usb_ctrlrequest), GFP_ATOMIC);
+ if (!req) {
+ deverr(dev, "Failed to allocate memory for control request");
+ usb_free_urb(urb);
+ return;
+ }
+
+ req->bRequestType = USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE;
+ req->bRequest = DM_WRITE_REGS;
+ req->wValue = 0;
+ req->wIndex = cpu_to_le16(reg);
+ req->wLength = cpu_to_le16(length);
+
+ usb_fill_control_urb(urb, dev->udev,
+ usb_sndctrlpipe(dev->udev, 0),
+ (void *)req, data, length,
+ dm_write_async_callback, req);
+
+ status = usb_submit_urb(urb, GFP_ATOMIC);
+ if (status < 0) {
+ deverr(dev, "Error submitting the control message: status=%d",
+ status);
+ kfree(req);
+ usb_free_urb(urb);
+ }
+}
+
+static void dm_write_reg_async(struct usbnet *dev, u8 reg, u8 value)
+{
+ struct usb_ctrlrequest *req;
+ struct urb *urb;
+ int status;
+
+ devdbg(dev, "dm_write_reg_async() reg=0x%02x value=0x%02x",
+ reg, value);
+
+ urb = usb_alloc_urb(0, GFP_ATOMIC);
+ if (!urb) {
+ deverr(dev, "Error allocating URB in dm_write_async!");
+ return;
+ }
+
+ req = kmalloc(sizeof(struct usb_ctrlrequest), GFP_ATOMIC);
+ if (!req) {
+ deverr(dev, "Failed to allocate memory for control request");
+ usb_free_urb(urb);
+ return;
+ }
+
+ req->bRequestType = USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE;
+ req->bRequest = DM_WRITE_REG;
+ req->wValue = cpu_to_le16(value);
+ req->wIndex = cpu_to_le16(reg);
+ req->wLength = 0;
+
+ usb_fill_control_urb(urb, dev->udev,
+ usb_sndctrlpipe(dev->udev, 0),
+ (void *)req, NULL, 0, dm_write_async_callback, req);
+
+ status = usb_submit_urb(urb, GFP_ATOMIC);
+ if (status < 0) {
+ deverr(dev, "Error submitting the control message: status=%d",
+ status);
+ kfree(req);
+ usb_free_urb(urb);
+ }
+}
+
+static int dm_read_shared_word(struct usbnet *dev, int phy, u8 reg, u16 *value)
+{
+ int ret, i;
+
+ mutex_lock(&dev->phy_mutex);
+
+ dm_write_reg(dev, DM_SHARED_ADDR, phy ? (reg | 0x40) : reg);
+ dm_write_reg(dev, DM_SHARED_CTRL, phy ? 0xc : 0x4);
+
+ for (i = 0; i < DM_TIMEOUT; i++) {
+ u8 tmp;
+
+ udelay(1);
+ ret = dm_read_reg(dev, DM_SHARED_CTRL, &tmp);
+ if (ret < 0)
+ goto out;
+
+ /* ready */
+ if ((tmp & 1) == 0)
+ break;
+ }
+
+ if (i == DM_TIMEOUT) {
+ deverr(dev, "%s read timed out!", phy ? "phy" : "eeprom");
+ ret = -EIO;
+ goto out;
+ }
+
+ dm_write_reg(dev, DM_SHARED_CTRL, 0x0);
+ ret = dm_read(dev, DM_SHARED_DATA, 2, value);
+
+ devdbg(dev, "read shared %d 0x%02x returned 0x%04x, %d",
+ phy, reg, *value, ret);
+
+ out:
+ mutex_unlock(&dev->phy_mutex);
+ return ret;
+}
+
+static int dm_write_shared_word(struct usbnet *dev, int phy, u8 reg, u16 value)
+{
+ int ret, i;
+
+ mutex_lock(&dev->phy_mutex);
+
+ ret = dm_write(dev, DM_SHARED_DATA, 2, &value);
+ if (ret < 0)
+ goto out;
+
+ dm_write_reg(dev, DM_SHARED_ADDR, phy ? (reg | 0x40) : reg);
+ dm_write_reg(dev, DM_SHARED_CTRL, phy ? 0x1c : 0x14);
+
+ for (i = 0; i < DM_TIMEOUT; i++) {
+ u8 tmp;
+
+ udelay(1);
+ ret = dm_read_reg(dev, DM_SHARED_CTRL, &tmp);
+ if (ret < 0)
+ goto out;
+
+ /* ready */
+ if ((tmp & 1) == 0)
+ break;
+ }
+
+ if (i == DM_TIMEOUT) {
+ deverr(dev, "%s write timed out!", phy ? "phy" : "eeprom");
+ ret = -EIO;
+ goto out;
+ }
+
+ dm_write_reg(dev, DM_SHARED_CTRL, 0x0);
+
+out:
+ mutex_unlock(&dev->phy_mutex);
+ return ret;
+}
+
+static int dm_read_eeprom_word(struct usbnet *dev, u8 offset, void *value)
+{
+ return dm_read_shared_word(dev, 0, offset, value);
+}
+
+
+
+static int dm9601_get_eeprom_len(struct net_device *dev)
+{
+ return DM_EEPROM_LEN;
+}
+
+static int dm9601_get_eeprom(struct net_device *net,
+ struct ethtool_eeprom *eeprom, u8 * data)
+{
+ struct usbnet *dev = netdev_priv(net);
+ u16 *ebuf = (u16 *) data;
+ int i;
+
+ /* access is 16bit */
+ if ((eeprom->offset % 2) || (eeprom->len % 2))
+ return -EINVAL;
+
+ for (i = 0; i < eeprom->len / 2; i++) {
+ if (dm_read_eeprom_word(dev, eeprom->offset / 2 + i,
+ &ebuf[i]) < 0)
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static int dm9601_mdio_read(struct net_device *netdev, int phy_id, int loc)
+{
+ struct usbnet *dev = netdev_priv(netdev);
+
+ u16 res;
+
+ if (phy_id) {
+ devdbg(dev, "Only internal phy supported");
+ return 0;
+ }
+
+ dm_read_shared_word(dev, 1, loc, &res);
+
+ devdbg(dev,
+ "dm9601_mdio_read() phy_id=0x%02x, loc=0x%02x, returns=0x%04x",
+ phy_id, loc, le16_to_cpu(res));
+
+ return le16_to_cpu(res);
+}
+
+static void dm9601_mdio_write(struct net_device *netdev, int phy_id, int loc,
+ int val)
+{
+ struct usbnet *dev = netdev_priv(netdev);
+ u16 res = cpu_to_le16(val);
+
+ if (phy_id) {
+ devdbg(dev, "Only internal phy supported");
+ return;
+ }
+
+ devdbg(dev,"dm9601_mdio_write() phy_id=0x%02x, loc=0x%02x, val=0x%04x",
+ phy_id, loc, val);
+
+ dm_write_shared_word(dev, 1, loc, res);
+}
+
+static void dm9601_get_drvinfo(struct net_device *net,
+ struct ethtool_drvinfo *info)
+{
+ /* Inherit standard device info */
+ usbnet_get_drvinfo(net, info);
+ info->eedump_len = DM_EEPROM_LEN;
+}
+
+static u32 dm9601_get_link(struct net_device *net)
+{
+ struct usbnet *dev = netdev_priv(net);
+
+ return mii_link_ok(&dev->mii);
+}
+
+static int dm9601_ioctl(struct net_device *net, struct ifreq *rq, int cmd)
+{
+ struct usbnet *dev = netdev_priv(net);
+
+ return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL);
+}
+
+static struct ethtool_ops dm9601_ethtool_ops = {
+ .get_drvinfo = dm9601_get_drvinfo,
+ .get_link = dm9601_get_link,
+ .get_msglevel = usbnet_get_msglevel,
+ .set_msglevel = usbnet_set_msglevel,
+ .get_eeprom_len = dm9601_get_eeprom_len,
+ .get_eeprom = dm9601_get_eeprom,
+ .get_settings = usbnet_get_settings,
+ .set_settings = usbnet_set_settings,
+ .nway_reset = usbnet_nway_reset,
+};
+
+static void dm9601_set_multicast(struct net_device *net)
+{
+ struct usbnet *dev = netdev_priv(net);
+ /* We use the 20 byte dev->data for our 8 byte filter buffer
+ * to avoid allocating memory that is tricky to free later */
+ u8 *hashes = (u8 *) & dev->data;
+ u8 rx_ctl = 0x01;
+
+ memset(hashes, 0x00, DM_MCAST_SIZE);
+ hashes[DM_MCAST_SIZE - 1] |= 0x80; /* broadcast address */
+
+ if (net->flags & IFF_PROMISC) {
+ rx_ctl |= 0x02;
+ } else if (net->flags & IFF_ALLMULTI || net->mc_count > DM_MAX_MCAST) {
+ rx_ctl |= 0x04;
+ } else if (net->mc_count) {
+ struct dev_mc_list *mc_list = net->mc_list;
+ int i;
+
+ for (i = 0; i < net->mc_count; i++) {
+ u32 crc = ether_crc(ETH_ALEN, mc_list->dmi_addr) >> 26;
+ hashes[crc >> 3] |= 1 << (crc & 0x7);
+ }
+ }
+
+ dm_write_async(dev, DM_MCAST_ADDR, DM_MCAST_SIZE, hashes);
+ dm_write_reg_async(dev, DM_RX_CTRL, rx_ctl);
+}
+
+static int dm9601_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+ int ret;
+
+ ret = usbnet_get_endpoints(dev, intf);
+ if (ret)
+ goto out;
+
+ dev->net->do_ioctl = dm9601_ioctl;
+ dev->net->set_multicast_list = dm9601_set_multicast;
+ dev->net->ethtool_ops = &dm9601_ethtool_ops;
+ dev->net->hard_header_len += DM_TX_OVERHEAD;
+ dev->hard_mtu = dev->net->mtu + dev->net->hard_header_len;
+ dev->rx_urb_size = dev->net->mtu + DM_RX_OVERHEAD;
+
+ dev->mii.dev = dev->net;
+ dev->mii.mdio_read = dm9601_mdio_read;
+ dev->mii.mdio_write = dm9601_mdio_write;
+ dev->mii.phy_id_mask = 0x1f;
+ dev->mii.reg_num_mask = 0x1f;
+
+ /* reset */
+ ret = dm_write_reg(dev, DM_NET_CTRL, 1);
+ udelay(20);
+
+ /* read MAC */
+ ret = dm_read(dev, DM_PHY_ADDR, ETH_ALEN, dev->net->dev_addr);
+ if (ret < 0) {
+ printk(KERN_ERR "Error reading MAC address\n");
+ ret = -ENODEV;
+ goto out;
+ }
+
+
+ /* power up phy */
+ dm_write_reg(dev, DM_GPR_CTRL, 1);
+ dm_write_reg(dev, DM_GPR_DATA, 0);
+
+ /* receive broadcast packets */
+ dm9601_set_multicast(dev->net);
+
+ dm9601_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET);
+ dm9601_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE,
+ ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP);
+ mii_nway_restart(&dev->mii);
+
+out:
+ return ret;
+}
+
+static int dm9601_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
+{
+ u8 status;
+ int len;
+
+ /* format:
+ b0: rx status
+ b1: packet length (incl crc) low
+ b2: packet length (incl crc) high
+ b3..n-4: packet data
+ bn-3..bn: ethernet crc
+ */
+
+ if (unlikely(skb->len < DM_RX_OVERHEAD)) {
+ dev_err(&dev->udev->dev, "unexpected tiny rx frame\n");
+ return 0;
+ }
+
+ status = skb->data[0];
+ len = (skb->data[1] | (skb->data[2] << 8)) - 4;
+
+ if (unlikely(status & 0xbf)) {
+ if (status & 0x01) dev->stats.rx_fifo_errors++;
+ if (status & 0x02) dev->stats.rx_crc_errors++;
+ if (status & 0x04) dev->stats.rx_frame_errors++;
+ if (status & 0x20) dev->stats.rx_missed_errors++;
+ if (status & 0x90) dev->stats.rx_length_errors++;
+ return 0;
+ }
+
+ skb_pull(skb, 3);
+ skb_trim(skb, len);
+
+ return 1;
+}
+
+static struct sk_buff *dm9601_tx_fixup(struct usbnet *dev, struct sk_buff *skb,
+ gfp_t flags)
+{
+ int len;
+
+ /* format:
+ b0: packet length low
+ b1: packet length high
+ b3..n: packet data
+ */
+
+ if (skb_headroom(skb) < DM_TX_OVERHEAD) {
+ struct sk_buff *skb2;
+
+ skb2 = skb_copy_expand(skb, DM_TX_OVERHEAD, 0, flags);
+ dev_kfree_skb_any(skb);
+ skb = skb2;
+ if (!skb)
+ return NULL;
+ }
+
+ __skb_push(skb, DM_TX_OVERHEAD);
+
+ len = skb->len;
+ /* usbnet adds padding if length is a multiple of packet size
+ if so, adjust length value in header */
+ if ((len % dev->maxpacket) == 0)
+ len++;
+
+ skb->data[0] = len;
+ skb->data[1] = len >> 8;
+
+ return skb;
+}
+
+static void dm9601_status(struct usbnet *dev, struct urb *urb)
+{
+ int link;
+ u8 *buf;
+
+ /* format:
+ b0: net status
+ b1: tx status 1
+ b2: tx status 2
+ b3: rx status
+ b4: rx overflow
+ b5: rx count
+ b6: tx count
+ b7: gpr
+ */
+
+ if (urb->actual_length < 8)
+ return;
+
+ buf = urb->transfer_buffer;
+
+ link = !!(buf[0] & 0x40);
+ if (netif_carrier_ok(dev->net) != link) {
+ if (link) {
+ netif_carrier_on(dev->net);
+ usbnet_defer_kevent (dev, EVENT_LINK_RESET);
+ }
+ else
+ netif_carrier_off(dev->net);
+ devdbg(dev, "Link Status is: %d", link);
+ }
+}
+
+static int dm9601_link_reset(struct usbnet *dev)
+{
+ struct ethtool_cmd ecmd;
+
+ mii_check_media(&dev->mii, 1, 1);
+ mii_ethtool_gset(&dev->mii, &ecmd);
+
+ devdbg(dev, "link_reset() speed: %d duplex: %d",
+ ecmd.speed, ecmd.duplex);
+
+ return 0;
+}
+
+static const struct driver_info dm9601_info = {
+ .description = "Davicom DM9601 USB Ethernet",
+ .flags = FLAG_ETHER,
+ .bind = dm9601_bind,
+ .rx_fixup = dm9601_rx_fixup,
+ .tx_fixup = dm9601_tx_fixup,
+ .status = dm9601_status,
+ .link_reset = dm9601_link_reset,
+ .reset = dm9601_link_reset,
+};
+
+static const struct usb_device_id products[] = {
+ {
+ USB_DEVICE(0x07aa, 0x9601), /* Corega FEther USB-TXC */
+ .driver_info = (unsigned long)&dm9601_info,
+ },
+ {
+ USB_DEVICE(0x0a46, 0x9601), /* Davicom USB-100 */
+ .driver_info = (unsigned long)&dm9601_info,
+ },
+ {
+ USB_DEVICE(0x0a46, 0x6688), /* ZT6688 USB NIC */
+ .driver_info = (unsigned long)&dm9601_info,
+ },
+ {
+ USB_DEVICE(0x0a46, 0x0268), /* ShanTou ST268 USB NIC */
+ .driver_info = (unsigned long)&dm9601_info,
+ },
+ {}, // END
+};
+
+MODULE_DEVICE_TABLE(usb, products);
+
+static struct usb_driver dm9601_driver = {
+ .name = "dm9601",
+ .id_table = products,
+ .probe = usbnet_probe,
+ .disconnect = usbnet_disconnect,
+ .suspend = usbnet_suspend,
+ .resume = usbnet_resume,
+};
+
+static int __init dm9601_init(void)
+{
+ return usb_register(&dm9601_driver);
+}
+
+static void __exit dm9601_exit(void)
+{
+ usb_deregister(&dm9601_driver);
+}
+
+module_init(dm9601_init);
+module_exit(dm9601_exit);
+
+MODULE_AUTHOR("Peter Korsgaard <jacmet@sunsite.dk>");
+MODULE_DESCRIPTION("Davicom DM9601 USB 1.1 ethernet devices");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/usb/gl620a.c b/drivers/net/usb/gl620a.c
new file mode 100644
index 0000000..031cf5c
--- /dev/null
+++ b/drivers/net/usb/gl620a.c
@@ -0,0 +1,245 @@
+/*
+ * GeneSys GL620USB-A based links
+ * Copyright (C) 2001 by Jiun-Jie Huang <huangjj@genesyslogic.com.tw>
+ * Copyright (C) 2001 by Stanislav Brabec <utx@penguin.cz>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+// #define DEBUG // error path messages, extra info
+// #define VERBOSE // more; success messages
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/workqueue.h>
+#include <linux/mii.h>
+#include <linux/usb.h>
+
+#include "usbnet.h"
+
+
+/*
+ * GeneSys GL620USB-A (www.genesyslogic.com.tw)
+ *
+ * ... should partially interop with the Win32 driver for this hardware.
+ * The GeneSys docs imply there's some NDIS issue motivating this framing.
+ *
+ * Some info from GeneSys:
+ * - GL620USB-A is full duplex; GL620USB is only half duplex for bulk.
+ * (Some cables, like the BAFO-100c, use the half duplex version.)
+ * - For the full duplex model, the low bit of the version code says
+ * which side is which ("left/right").
+ * - For the half duplex type, a control/interrupt handshake settles
+ * the transfer direction. (That's disabled here, partially coded.)
+ * A control URB would block until other side writes an interrupt.
+ *
+ * Original code from Jiun-Jie Huang <huangjj@genesyslogic.com.tw>
+ * and merged into "usbnet" by Stanislav Brabec <utx@penguin.cz>.
+ */
+
+// control msg write command
+#define GENELINK_CONNECT_WRITE 0xF0
+// interrupt pipe index
+#define GENELINK_INTERRUPT_PIPE 0x03
+// interrupt read buffer size
+#define INTERRUPT_BUFSIZE 0x08
+// interrupt pipe interval value
+#define GENELINK_INTERRUPT_INTERVAL 0x10
+// max transmit packet number per transmit
+#define GL_MAX_TRANSMIT_PACKETS 32
+// max packet length
+#define GL_MAX_PACKET_LEN 1514
+// max receive buffer size
+#define GL_RCV_BUF_SIZE \
+ (((GL_MAX_PACKET_LEN + 4) * GL_MAX_TRANSMIT_PACKETS) + 4)
+
+struct gl_packet {
+ __le32 packet_length;
+ char packet_data [1];
+};
+
+struct gl_header {
+ __le32 packet_count;
+ struct gl_packet packets;
+};
+
+static int genelink_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
+{
+ struct gl_header *header;
+ struct gl_packet *packet;
+ struct sk_buff *gl_skb;
+ u32 size;
+ u32 count;
+
+ header = (struct gl_header *) skb->data;
+
+ // get the packet count of the received skb
+ count = le32_to_cpu(header->packet_count);
+ if (count > GL_MAX_TRANSMIT_PACKETS) {
+ dbg("genelink: invalid received packet count %u", count);
+ return 0;
+ }
+
+ // set the current packet pointer to the first packet
+ packet = &header->packets;
+
+ // decrement the length for the packet count size 4 bytes
+ skb_pull(skb, 4);
+
+ while (count > 1) {
+ // get the packet length
+ size = le32_to_cpu(packet->packet_length);
+
+ // this may be a broken packet
+ if (size > GL_MAX_PACKET_LEN) {
+ dbg("genelink: invalid rx length %d", size);
+ return 0;
+ }
+
+ // allocate the skb for the individual packet
+ gl_skb = alloc_skb(size, GFP_ATOMIC);
+ if (gl_skb) {
+
+ // copy the packet data to the new skb
+ memcpy(skb_put(gl_skb, size),
+ packet->packet_data, size);
+ usbnet_skb_return(dev, gl_skb);
+ }
+
+ // advance to the next packet
+ packet = (struct gl_packet *)&packet->packet_data[size];
+ count--;
+
+ // shift the data pointer to the next gl_packet
+ skb_pull(skb, size + 4);
+ }
+
+ // skip the packet length field 4 bytes
+ skb_pull(skb, 4);
+
+ if (skb->len > GL_MAX_PACKET_LEN) {
+ dbg("genelink: invalid rx length %d", skb->len);
+ return 0;
+ }
+ return 1;
+}
+
+static struct sk_buff *
+genelink_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags)
+{
+ int padlen;
+ int length = skb->len;
+ int headroom = skb_headroom(skb);
+ int tailroom = skb_tailroom(skb);
+ __le32 *packet_count;
+ __le32 *packet_len;
+
+ // FIXME: magic numbers, bleech
+ padlen = ((skb->len + (4 + 4*1)) % 64) ? 0 : 1;
+
+ if ((!skb_cloned(skb))
+ && ((headroom + tailroom) >= (padlen + (4 + 4*1)))) {
+ if ((headroom < (4 + 4*1)) || (tailroom < padlen)) {
+ skb->data = memmove(skb->head + (4 + 4*1),
+ skb->data, skb->len);
+ skb_set_tail_pointer(skb, skb->len);
+ }
+ } else {
+ struct sk_buff *skb2;
+ skb2 = skb_copy_expand(skb, (4 + 4*1) , padlen, flags);
+ dev_kfree_skb_any(skb);
+ skb = skb2;
+ if (!skb)
+ return NULL;
+ }
+
+ // attach the packet count to the header
+ packet_count = (__le32 *) skb_push(skb, (4 + 4*1));
+ packet_len = packet_count + 1;
+
+ *packet_count = cpu_to_le32(1);
+ *packet_len = cpu_to_le32(length);
+
+ // add padding byte
+ if ((skb->len % dev->maxpacket) == 0)
+ skb_put(skb, 1);
+
+ return skb;
+}
+
+static int genelink_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+ dev->hard_mtu = GL_RCV_BUF_SIZE;
+ dev->net->hard_header_len += 4;
+ dev->in = usb_rcvbulkpipe(dev->udev, dev->driver_info->in);
+ dev->out = usb_sndbulkpipe(dev->udev, dev->driver_info->out);
+ return 0;
+}
+
+static const struct driver_info genelink_info = {
+ .description = "Genesys GeneLink",
+ .flags = FLAG_FRAMING_GL | FLAG_NO_SETINT,
+ .bind = genelink_bind,
+ .rx_fixup = genelink_rx_fixup,
+ .tx_fixup = genelink_tx_fixup,
+
+ .in = 1, .out = 2,
+
+#ifdef GENELINK_ACK
+ .check_connect =genelink_check_connect,
+#endif
+};
+
+static const struct usb_device_id products [] = {
+
+{
+ USB_DEVICE(0x05e3, 0x0502), // GL620USB-A
+ .driver_info = (unsigned long) &genelink_info,
+},
+ /* NOT: USB_DEVICE(0x05e3, 0x0501), // GL620USB
+ * that's half duplex, not currently supported
+ */
+ { }, // END
+};
+MODULE_DEVICE_TABLE(usb, products);
+
+static struct usb_driver gl620a_driver = {
+ .name = "gl620a",
+ .id_table = products,
+ .probe = usbnet_probe,
+ .disconnect = usbnet_disconnect,
+ .suspend = usbnet_suspend,
+ .resume = usbnet_resume,
+};
+
+static int __init usbnet_init(void)
+{
+ return usb_register(&gl620a_driver);
+}
+module_init(usbnet_init);
+
+static void __exit usbnet_exit(void)
+{
+ usb_deregister(&gl620a_driver);
+}
+module_exit(usbnet_exit);
+
+MODULE_AUTHOR("Jiun-Jie Huang");
+MODULE_DESCRIPTION("GL620-USB-A Host-to-Host Link cables");
+MODULE_LICENSE("GPL");
+
diff --git a/drivers/net/usb/kaweth.c b/drivers/net/usb/kaweth.c
new file mode 100644
index 0000000..60d2944
--- /dev/null
+++ b/drivers/net/usb/kaweth.c
@@ -0,0 +1,1337 @@
+/****************************************************************
+ *
+ * kaweth.c - driver for KL5KUSB101 based USB->Ethernet
+ *
+ * (c) 2000 Interlan Communications
+ * (c) 2000 Stephane Alnet
+ * (C) 2001 Brad Hards
+ * (C) 2002 Oliver Neukum
+ *
+ * Original author: The Zapman <zapman@interlan.net>
+ * Inspired by, and much credit goes to Michael Rothwell
+ * <rothwell@interlan.net> for the test equipment, help, and patience
+ * Based off of (and with thanks to) Petko Manolov's pegaus.c driver.
+ * Also many thanks to Joel Silverman and Ed Surprenant at Kawasaki
+ * for providing the firmware and driver resources.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ ****************************************************************/
+
+/* TODO:
+ * Fix in_interrupt() problem
+ * Develop test procedures for USB net interfaces
+ * Run test procedures
+ * Fix bugs from previous two steps
+ * Snoop other OSs for any tricks we're not doing
+ * SMP locking
+ * Reduce arbitrary timeouts
+ * Smart multicast support
+ * Temporary MAC change support
+ * Tunable SOFs parameter - ioctl()?
+ * Ethernet stats collection
+ * Code formatting improvements
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/usb.h>
+#include <linux/types.h>
+#include <linux/ethtool.h>
+#include <linux/dma-mapping.h>
+#include <linux/wait.h>
+#include <asm/uaccess.h>
+#include <asm/semaphore.h>
+#include <asm/byteorder.h>
+
+#undef DEBUG
+
+#include "kawethfw.h"
+
+#define KAWETH_MTU 1514
+#define KAWETH_BUF_SIZE 1664
+#define KAWETH_TX_TIMEOUT (5 * HZ)
+#define KAWETH_SCRATCH_SIZE 32
+#define KAWETH_FIRMWARE_BUF_SIZE 4096
+#define KAWETH_CONTROL_TIMEOUT (30 * HZ)
+
+#define KAWETH_STATUS_BROKEN 0x0000001
+#define KAWETH_STATUS_CLOSING 0x0000002
+#define KAWETH_STATUS_SUSPENDING 0x0000004
+
+#define KAWETH_STATUS_BLOCKED (KAWETH_STATUS_CLOSING | KAWETH_STATUS_SUSPENDING)
+
+#define KAWETH_PACKET_FILTER_PROMISCUOUS 0x01
+#define KAWETH_PACKET_FILTER_ALL_MULTICAST 0x02
+#define KAWETH_PACKET_FILTER_DIRECTED 0x04
+#define KAWETH_PACKET_FILTER_BROADCAST 0x08
+#define KAWETH_PACKET_FILTER_MULTICAST 0x10
+
+/* Table 7 */
+#define KAWETH_COMMAND_GET_ETHERNET_DESC 0x00
+#define KAWETH_COMMAND_MULTICAST_FILTERS 0x01
+#define KAWETH_COMMAND_SET_PACKET_FILTER 0x02
+#define KAWETH_COMMAND_STATISTICS 0x03
+#define KAWETH_COMMAND_SET_TEMP_MAC 0x06
+#define KAWETH_COMMAND_GET_TEMP_MAC 0x07
+#define KAWETH_COMMAND_SET_URB_SIZE 0x08
+#define KAWETH_COMMAND_SET_SOFS_WAIT 0x09
+#define KAWETH_COMMAND_SCAN 0xFF
+
+#define KAWETH_SOFS_TO_WAIT 0x05
+
+#define INTBUFFERSIZE 4
+
+#define STATE_OFFSET 0
+#define STATE_MASK 0x40
+#define STATE_SHIFT 5
+
+#define IS_BLOCKED(s) (s & KAWETH_STATUS_BLOCKED)
+
+
+MODULE_AUTHOR("Michael Zappe <zapman@interlan.net>, Stephane Alnet <stephane@u-picardie.fr>, Brad Hards <bhards@bigpond.net.au> and Oliver Neukum <oliver@neukum.org>");
+MODULE_DESCRIPTION("KL5USB101 USB Ethernet driver");
+MODULE_LICENSE("GPL");
+
+static const char driver_name[] = "kaweth";
+
+static int kaweth_probe(
+ struct usb_interface *intf,
+ const struct usb_device_id *id /* from id_table */
+ );
+static void kaweth_disconnect(struct usb_interface *intf);
+static int kaweth_internal_control_msg(struct usb_device *usb_dev,
+ unsigned int pipe,
+ struct usb_ctrlrequest *cmd, void *data,
+ int len, int timeout);
+static int kaweth_suspend(struct usb_interface *intf, pm_message_t message);
+static int kaweth_resume(struct usb_interface *intf);
+
+/****************************************************************
+ * usb_device_id
+ ****************************************************************/
+static struct usb_device_id usb_klsi_table[] = {
+ { USB_DEVICE(0x03e8, 0x0008) }, /* AOX Endpoints USB Ethernet */
+ { USB_DEVICE(0x04bb, 0x0901) }, /* I-O DATA USB-ET/T */
+ { USB_DEVICE(0x0506, 0x03e8) }, /* 3Com 3C19250 */
+ { USB_DEVICE(0x0506, 0x11f8) }, /* 3Com 3C460 */
+ { USB_DEVICE(0x0557, 0x2002) }, /* ATEN USB Ethernet */
+ { USB_DEVICE(0x0557, 0x4000) }, /* D-Link DSB-650C */
+ { USB_DEVICE(0x0565, 0x0002) }, /* Peracom Enet */
+ { USB_DEVICE(0x0565, 0x0003) }, /* Optus@Home UEP1045A */
+ { USB_DEVICE(0x0565, 0x0005) }, /* Peracom Enet2 */
+ { USB_DEVICE(0x05e9, 0x0008) }, /* KLSI KL5KUSB101B */
+ { USB_DEVICE(0x05e9, 0x0009) }, /* KLSI KL5KUSB101B (Board change) */
+ { USB_DEVICE(0x066b, 0x2202) }, /* Linksys USB10T */
+ { USB_DEVICE(0x06e1, 0x0008) }, /* ADS USB-10BT */
+ { USB_DEVICE(0x06e1, 0x0009) }, /* ADS USB-10BT */
+ { USB_DEVICE(0x0707, 0x0100) }, /* SMC 2202USB */
+ { USB_DEVICE(0x07aa, 0x0001) }, /* Correga K.K. */
+ { USB_DEVICE(0x07b8, 0x4000) }, /* D-Link DU-E10 */
+ { USB_DEVICE(0x0846, 0x1001) }, /* NetGear EA-101 */
+ { USB_DEVICE(0x0846, 0x1002) }, /* NetGear EA-101 */
+ { USB_DEVICE(0x085a, 0x0008) }, /* PortGear Ethernet Adapter */
+ { USB_DEVICE(0x085a, 0x0009) }, /* PortGear Ethernet Adapter */
+ { USB_DEVICE(0x087d, 0x5704) }, /* Jaton USB Ethernet Device Adapter */
+ { USB_DEVICE(0x0951, 0x0008) }, /* Kingston Technology USB Ethernet Adapter */
+ { USB_DEVICE(0x095a, 0x3003) }, /* Portsmith Express Ethernet Adapter */
+ { USB_DEVICE(0x10bd, 0x1427) }, /* ASANTE USB To Ethernet Adapter */
+ { USB_DEVICE(0x1342, 0x0204) }, /* Mobility USB-Ethernet Adapter */
+ { USB_DEVICE(0x13d2, 0x0400) }, /* Shark Pocket Adapter */
+ { USB_DEVICE(0x1485, 0x0001) }, /* Silicom U2E */
+ { USB_DEVICE(0x1485, 0x0002) }, /* Psion Dacom Gold Port Ethernet */
+ { USB_DEVICE(0x1645, 0x0005) }, /* Entrega E45 */
+ { USB_DEVICE(0x1645, 0x0008) }, /* Entrega USB Ethernet Adapter */
+ { USB_DEVICE(0x1645, 0x8005) }, /* PortGear Ethernet Adapter */
+ { USB_DEVICE(0x1668, 0x0323) }, /* Actiontec USB Ethernet */
+ { USB_DEVICE(0x2001, 0x4000) }, /* D-link DSB-650C */
+ {} /* Null terminator */
+};
+
+MODULE_DEVICE_TABLE (usb, usb_klsi_table);
+
+/****************************************************************
+ * kaweth_driver
+ ****************************************************************/
+static struct usb_driver kaweth_driver = {
+ .name = driver_name,
+ .probe = kaweth_probe,
+ .disconnect = kaweth_disconnect,
+ .suspend = kaweth_suspend,
+ .resume = kaweth_resume,
+ .id_table = usb_klsi_table,
+ .supports_autosuspend = 1,
+};
+
+typedef __u8 eth_addr_t[6];
+
+/****************************************************************
+ * usb_eth_dev
+ ****************************************************************/
+struct usb_eth_dev {
+ char *name;
+ __u16 vendor;
+ __u16 device;
+ void *pdata;
+};
+
+/****************************************************************
+ * kaweth_ethernet_configuration
+ * Refer Table 8
+ ****************************************************************/
+struct kaweth_ethernet_configuration
+{
+ __u8 size;
+ __u8 reserved1;
+ __u8 reserved2;
+ eth_addr_t hw_addr;
+ __u32 statistics_mask;
+ __le16 segment_size;
+ __u16 max_multicast_filters;
+ __u8 reserved3;
+} __attribute__ ((packed));
+
+/****************************************************************
+ * kaweth_device
+ ****************************************************************/
+struct kaweth_device
+{
+ spinlock_t device_lock;
+
+ __u32 status;
+ int end;
+ int suspend_lowmem_rx;
+ int suspend_lowmem_ctrl;
+ int linkstate;
+ int opened;
+ struct delayed_work lowmem_work;
+
+ struct usb_device *dev;
+ struct usb_interface *intf;
+ struct net_device *net;
+ wait_queue_head_t term_wait;
+
+ struct urb *rx_urb;
+ struct urb *tx_urb;
+ struct urb *irq_urb;
+
+ dma_addr_t intbufferhandle;
+ __u8 *intbuffer;
+ dma_addr_t rxbufferhandle;
+ __u8 *rx_buf;
+
+
+ struct sk_buff *tx_skb;
+
+ __u8 *firmware_buf;
+ __u8 scratch[KAWETH_SCRATCH_SIZE];
+ __u16 packet_filter_bitmap;
+
+ struct kaweth_ethernet_configuration configuration;
+
+ struct net_device_stats stats;
+};
+
+
+/****************************************************************
+ * kaweth_control
+ ****************************************************************/
+static int kaweth_control(struct kaweth_device *kaweth,
+ unsigned int pipe,
+ __u8 request,
+ __u8 requesttype,
+ __u16 value,
+ __u16 index,
+ void *data,
+ __u16 size,
+ int timeout)
+{
+ struct usb_ctrlrequest *dr;
+
+ dbg("kaweth_control()");
+
+ if(in_interrupt()) {
+ dbg("in_interrupt()");
+ return -EBUSY;
+ }
+
+ dr = kmalloc(sizeof(struct usb_ctrlrequest), GFP_ATOMIC);
+
+ if (!dr) {
+ dbg("kmalloc() failed");
+ return -ENOMEM;
+ }
+
+ dr->bRequestType= requesttype;
+ dr->bRequest = request;
+ dr->wValue = cpu_to_le16p(&value);
+ dr->wIndex = cpu_to_le16p(&index);
+ dr->wLength = cpu_to_le16p(&size);
+
+ return kaweth_internal_control_msg(kaweth->dev,
+ pipe,
+ dr,
+ data,
+ size,
+ timeout);
+}
+
+/****************************************************************
+ * kaweth_read_configuration
+ ****************************************************************/
+static int kaweth_read_configuration(struct kaweth_device *kaweth)
+{
+ int retval;
+
+ dbg("Reading kaweth configuration");
+
+ retval = kaweth_control(kaweth,
+ usb_rcvctrlpipe(kaweth->dev, 0),
+ KAWETH_COMMAND_GET_ETHERNET_DESC,
+ USB_TYPE_VENDOR | USB_DIR_IN | USB_RECIP_DEVICE,
+ 0,
+ 0,
+ (void *)&kaweth->configuration,
+ sizeof(kaweth->configuration),
+ KAWETH_CONTROL_TIMEOUT);
+
+ return retval;
+}
+
+/****************************************************************
+ * kaweth_set_urb_size
+ ****************************************************************/
+static int kaweth_set_urb_size(struct kaweth_device *kaweth, __u16 urb_size)
+{
+ int retval;
+
+ dbg("Setting URB size to %d", (unsigned)urb_size);
+
+ retval = kaweth_control(kaweth,
+ usb_sndctrlpipe(kaweth->dev, 0),
+ KAWETH_COMMAND_SET_URB_SIZE,
+ USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_DEVICE,
+ urb_size,
+ 0,
+ (void *)&kaweth->scratch,
+ 0,
+ KAWETH_CONTROL_TIMEOUT);
+
+ return retval;
+}
+
+/****************************************************************
+ * kaweth_set_sofs_wait
+ ****************************************************************/
+static int kaweth_set_sofs_wait(struct kaweth_device *kaweth, __u16 sofs_wait)
+{
+ int retval;
+
+ dbg("Set SOFS wait to %d", (unsigned)sofs_wait);
+
+ retval = kaweth_control(kaweth,
+ usb_sndctrlpipe(kaweth->dev, 0),
+ KAWETH_COMMAND_SET_SOFS_WAIT,
+ USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_DEVICE,
+ sofs_wait,
+ 0,
+ (void *)&kaweth->scratch,
+ 0,
+ KAWETH_CONTROL_TIMEOUT);
+
+ return retval;
+}
+
+/****************************************************************
+ * kaweth_set_receive_filter
+ ****************************************************************/
+static int kaweth_set_receive_filter(struct kaweth_device *kaweth,
+ __u16 receive_filter)
+{
+ int retval;
+
+ dbg("Set receive filter to %d", (unsigned)receive_filter);
+
+ retval = kaweth_control(kaweth,
+ usb_sndctrlpipe(kaweth->dev, 0),
+ KAWETH_COMMAND_SET_PACKET_FILTER,
+ USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_DEVICE,
+ receive_filter,
+ 0,
+ (void *)&kaweth->scratch,
+ 0,
+ KAWETH_CONTROL_TIMEOUT);
+
+ return retval;
+}
+
+/****************************************************************
+ * kaweth_download_firmware
+ ****************************************************************/
+static int kaweth_download_firmware(struct kaweth_device *kaweth,
+ __u8 *data,
+ __u16 data_len,
+ __u8 interrupt,
+ __u8 type)
+{
+ if(data_len > KAWETH_FIRMWARE_BUF_SIZE) {
+ err("Firmware too big: %d", data_len);
+ return -ENOSPC;
+ }
+
+ memcpy(kaweth->firmware_buf, data, data_len);
+
+ kaweth->firmware_buf[2] = (data_len & 0xFF) - 7;
+ kaweth->firmware_buf[3] = data_len >> 8;
+ kaweth->firmware_buf[4] = type;
+ kaweth->firmware_buf[5] = interrupt;
+
+ dbg("High: %i, Low:%i", kaweth->firmware_buf[3],
+ kaweth->firmware_buf[2]);
+
+ dbg("Downloading firmware at %p to kaweth device at %p",
+ data,
+ kaweth);
+ dbg("Firmware length: %d", data_len);
+
+ return kaweth_control(kaweth,
+ usb_sndctrlpipe(kaweth->dev, 0),
+ KAWETH_COMMAND_SCAN,
+ USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_DEVICE,
+ 0,
+ 0,
+ (void *)kaweth->firmware_buf,
+ data_len,
+ KAWETH_CONTROL_TIMEOUT);
+}
+
+/****************************************************************
+ * kaweth_trigger_firmware
+ ****************************************************************/
+static int kaweth_trigger_firmware(struct kaweth_device *kaweth,
+ __u8 interrupt)
+{
+ kaweth->firmware_buf[0] = 0xB6;
+ kaweth->firmware_buf[1] = 0xC3;
+ kaweth->firmware_buf[2] = 0x01;
+ kaweth->firmware_buf[3] = 0x00;
+ kaweth->firmware_buf[4] = 0x06;
+ kaweth->firmware_buf[5] = interrupt;
+ kaweth->firmware_buf[6] = 0x00;
+ kaweth->firmware_buf[7] = 0x00;
+
+ dbg("Triggering firmware");
+
+ return kaweth_control(kaweth,
+ usb_sndctrlpipe(kaweth->dev, 0),
+ KAWETH_COMMAND_SCAN,
+ USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_DEVICE,
+ 0,
+ 0,
+ (void *)kaweth->firmware_buf,
+ 8,
+ KAWETH_CONTROL_TIMEOUT);
+}
+
+/****************************************************************
+ * kaweth_reset
+ ****************************************************************/
+static int kaweth_reset(struct kaweth_device *kaweth)
+{
+ int result;
+
+ dbg("kaweth_reset(%p)", kaweth);
+ result = kaweth_control(kaweth,
+ usb_sndctrlpipe(kaweth->dev, 0),
+ USB_REQ_SET_CONFIGURATION,
+ 0,
+ kaweth->dev->config[0].desc.bConfigurationValue,
+ 0,
+ NULL,
+ 0,
+ KAWETH_CONTROL_TIMEOUT);
+
+ mdelay(10);
+
+ dbg("kaweth_reset() returns %d.",result);
+
+ return result;
+}
+
+static void kaweth_usb_receive(struct urb *);
+static int kaweth_resubmit_rx_urb(struct kaweth_device *, gfp_t);
+
+/****************************************************************
+ int_callback
+*****************************************************************/
+
+static void kaweth_resubmit_int_urb(struct kaweth_device *kaweth, gfp_t mf)
+{
+ int status;
+
+ status = usb_submit_urb (kaweth->irq_urb, mf);
+ if (unlikely(status == -ENOMEM)) {
+ kaweth->suspend_lowmem_ctrl = 1;
+ schedule_delayed_work(&kaweth->lowmem_work, HZ/4);
+ } else {
+ kaweth->suspend_lowmem_ctrl = 0;
+ }
+
+ if (status)
+ err ("can't resubmit intr, %s-%s, status %d",
+ kaweth->dev->bus->bus_name,
+ kaweth->dev->devpath, status);
+}
+
+static void int_callback(struct urb *u)
+{
+ struct kaweth_device *kaweth = u->context;
+ int act_state;
+
+ switch (u->status) {
+ case 0: /* success */
+ break;
+ case -ECONNRESET: /* unlink */
+ case -ENOENT:
+ case -ESHUTDOWN:
+ return;
+ /* -EPIPE: should clear the halt */
+ default: /* error */
+ goto resubmit;
+ }
+
+ /* we check the link state to report changes */
+ if (kaweth->linkstate != (act_state = ( kaweth->intbuffer[STATE_OFFSET] | STATE_MASK) >> STATE_SHIFT)) {
+ if (act_state)
+ netif_carrier_on(kaweth->net);
+ else
+ netif_carrier_off(kaweth->net);
+
+ kaweth->linkstate = act_state;
+ }
+resubmit:
+ kaweth_resubmit_int_urb(kaweth, GFP_ATOMIC);
+}
+
+static void kaweth_resubmit_tl(struct work_struct *work)
+{
+ struct kaweth_device *kaweth =
+ container_of(work, struct kaweth_device, lowmem_work.work);
+
+ if (IS_BLOCKED(kaweth->status))
+ return;
+
+ if (kaweth->suspend_lowmem_rx)
+ kaweth_resubmit_rx_urb(kaweth, GFP_NOIO);
+
+ if (kaweth->suspend_lowmem_ctrl)
+ kaweth_resubmit_int_urb(kaweth, GFP_NOIO);
+}
+
+
+/****************************************************************
+ * kaweth_resubmit_rx_urb
+ ****************************************************************/
+static int kaweth_resubmit_rx_urb(struct kaweth_device *kaweth,
+ gfp_t mem_flags)
+{
+ int result;
+
+ usb_fill_bulk_urb(kaweth->rx_urb,
+ kaweth->dev,
+ usb_rcvbulkpipe(kaweth->dev, 1),
+ kaweth->rx_buf,
+ KAWETH_BUF_SIZE,
+ kaweth_usb_receive,
+ kaweth);
+ kaweth->rx_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+ kaweth->rx_urb->transfer_dma = kaweth->rxbufferhandle;
+
+ if((result = usb_submit_urb(kaweth->rx_urb, mem_flags))) {
+ if (result == -ENOMEM) {
+ kaweth->suspend_lowmem_rx = 1;
+ schedule_delayed_work(&kaweth->lowmem_work, HZ/4);
+ }
+ err("resubmitting rx_urb %d failed", result);
+ } else {
+ kaweth->suspend_lowmem_rx = 0;
+ }
+
+ return result;
+}
+
+static void kaweth_async_set_rx_mode(struct kaweth_device *kaweth);
+
+/****************************************************************
+ * kaweth_usb_receive
+ ****************************************************************/
+static void kaweth_usb_receive(struct urb *urb)
+{
+ struct kaweth_device *kaweth = urb->context;
+ struct net_device *net = kaweth->net;
+
+ int count = urb->actual_length;
+ int count2 = urb->transfer_buffer_length;
+
+ __u16 pkt_len = le16_to_cpup((__le16 *)kaweth->rx_buf);
+
+ struct sk_buff *skb;
+
+ if(unlikely(urb->status == -ECONNRESET || urb->status == -ESHUTDOWN))
+ /* we are killed - set a flag and wake the disconnect handler */
+ {
+ kaweth->end = 1;
+ wake_up(&kaweth->term_wait);
+ return;
+ }
+
+ spin_lock(&kaweth->device_lock);
+ if (IS_BLOCKED(kaweth->status)) {
+ spin_unlock(&kaweth->device_lock);
+ return;
+ }
+ spin_unlock(&kaweth->device_lock);
+
+ if(urb->status && urb->status != -EREMOTEIO && count != 1) {
+ err("%s RX status: %d count: %d packet_len: %d",
+ net->name,
+ urb->status,
+ count,
+ (int)pkt_len);
+ kaweth_resubmit_rx_urb(kaweth, GFP_ATOMIC);
+ return;
+ }
+
+ if(kaweth->net && (count > 2)) {
+ if(pkt_len > (count - 2)) {
+ err("Packet length too long for USB frame (pkt_len: %x, count: %x)",pkt_len, count);
+ err("Packet len & 2047: %x", pkt_len & 2047);
+ err("Count 2: %x", count2);
+ kaweth_resubmit_rx_urb(kaweth, GFP_ATOMIC);
+ return;
+ }
+
+ if(!(skb = dev_alloc_skb(pkt_len+2))) {
+ kaweth_resubmit_rx_urb(kaweth, GFP_ATOMIC);
+ return;
+ }
+
+ skb_reserve(skb, 2); /* Align IP on 16 byte boundaries */
+
+ eth_copy_and_sum(skb, kaweth->rx_buf + 2, pkt_len, 0);
+
+ skb_put(skb, pkt_len);
+
+ skb->protocol = eth_type_trans(skb, net);
+
+ netif_rx(skb);
+
+ kaweth->stats.rx_packets++;
+ kaweth->stats.rx_bytes += pkt_len;
+ }
+
+ kaweth_resubmit_rx_urb(kaweth, GFP_ATOMIC);
+}
+
+/****************************************************************
+ * kaweth_open
+ ****************************************************************/
+static int kaweth_open(struct net_device *net)
+{
+ struct kaweth_device *kaweth = netdev_priv(net);
+ int res;
+
+ dbg("Opening network device.");
+
+ res = usb_autopm_get_interface(kaweth->intf);
+ if (res) {
+ err("Interface cannot be resumed.");
+ return -EIO;
+ }
+ res = kaweth_resubmit_rx_urb(kaweth, GFP_KERNEL);
+ if (res)
+ goto err_out;
+
+ usb_fill_int_urb(
+ kaweth->irq_urb,
+ kaweth->dev,
+ usb_rcvintpipe(kaweth->dev, 3),
+ kaweth->intbuffer,
+ INTBUFFERSIZE,
+ int_callback,
+ kaweth,
+ 250); /* overriding the descriptor */
+ kaweth->irq_urb->transfer_dma = kaweth->intbufferhandle;
+ kaweth->irq_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+ res = usb_submit_urb(kaweth->irq_urb, GFP_KERNEL);
+ if (res) {
+ usb_kill_urb(kaweth->rx_urb);
+ goto err_out;
+ }
+ kaweth->opened = 1;
+
+ netif_start_queue(net);
+
+ kaweth_async_set_rx_mode(kaweth);
+ return 0;
+
+err_out:
+ usb_autopm_enable(kaweth->intf);
+ return -EIO;
+}
+
+/****************************************************************
+ * kaweth_kill_urbs
+ ****************************************************************/
+static void kaweth_kill_urbs(struct kaweth_device *kaweth)
+{
+ usb_kill_urb(kaweth->irq_urb);
+ usb_kill_urb(kaweth->rx_urb);
+ usb_kill_urb(kaweth->tx_urb);
+
+ flush_scheduled_work();
+
+ /* a scheduled work may have resubmitted,
+ we hit them again */
+ usb_kill_urb(kaweth->irq_urb);
+ usb_kill_urb(kaweth->rx_urb);
+}
+
+/****************************************************************
+ * kaweth_close
+ ****************************************************************/
+static int kaweth_close(struct net_device *net)
+{
+ struct kaweth_device *kaweth = netdev_priv(net);
+
+ netif_stop_queue(net);
+ kaweth->opened = 0;
+
+ kaweth->status |= KAWETH_STATUS_CLOSING;
+
+ kaweth_kill_urbs(kaweth);
+
+ kaweth->status &= ~KAWETH_STATUS_CLOSING;
+
+ usb_autopm_enable(kaweth->intf);
+
+ return 0;
+}
+
+static void kaweth_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
+{
+ struct kaweth_device *kaweth = netdev_priv(dev);
+
+ strlcpy(info->driver, driver_name, sizeof(info->driver));
+ usb_make_path(kaweth->dev, info->bus_info, sizeof (info->bus_info));
+}
+
+static u32 kaweth_get_link(struct net_device *dev)
+{
+ struct kaweth_device *kaweth = netdev_priv(dev);
+
+ return kaweth->linkstate;
+}
+
+static struct ethtool_ops ops = {
+ .get_drvinfo = kaweth_get_drvinfo,
+ .get_link = kaweth_get_link
+};
+
+/****************************************************************
+ * kaweth_usb_transmit_complete
+ ****************************************************************/
+static void kaweth_usb_transmit_complete(struct urb *urb)
+{
+ struct kaweth_device *kaweth = urb->context;
+ struct sk_buff *skb = kaweth->tx_skb;
+
+ if (unlikely(urb->status != 0))
+ if (urb->status != -ENOENT)
+ dbg("%s: TX status %d.", kaweth->net->name, urb->status);
+
+ netif_wake_queue(kaweth->net);
+ dev_kfree_skb_irq(skb);
+}
+
+/****************************************************************
+ * kaweth_start_xmit
+ ****************************************************************/
+static int kaweth_start_xmit(struct sk_buff *skb, struct net_device *net)
+{
+ struct kaweth_device *kaweth = netdev_priv(net);
+ __le16 *private_header;
+
+ int res;
+
+ spin_lock(&kaweth->device_lock);
+
+ kaweth_async_set_rx_mode(kaweth);
+ netif_stop_queue(net);
+ if (IS_BLOCKED(kaweth->status)) {
+ goto skip;
+ }
+
+ /* We now decide whether we can put our special header into the sk_buff */
+ if (skb_cloned(skb) || skb_headroom(skb) < 2) {
+ /* no such luck - we make our own */
+ struct sk_buff *copied_skb;
+ copied_skb = skb_copy_expand(skb, 2, 0, GFP_ATOMIC);
+ dev_kfree_skb_irq(skb);
+ skb = copied_skb;
+ if (!copied_skb) {
+ kaweth->stats.tx_errors++;
+ netif_start_queue(net);
+ spin_unlock(&kaweth->device_lock);
+ return 0;
+ }
+ }
+
+ private_header = (__le16 *)__skb_push(skb, 2);
+ *private_header = cpu_to_le16(skb->len-2);
+ kaweth->tx_skb = skb;
+
+ usb_fill_bulk_urb(kaweth->tx_urb,
+ kaweth->dev,
+ usb_sndbulkpipe(kaweth->dev, 2),
+ private_header,
+ skb->len,
+ kaweth_usb_transmit_complete,
+ kaweth);
+ kaweth->end = 0;
+
+ if((res = usb_submit_urb(kaweth->tx_urb, GFP_ATOMIC)))
+ {
+ warn("kaweth failed tx_urb %d", res);
+skip:
+ kaweth->stats.tx_errors++;
+
+ netif_start_queue(net);
+ dev_kfree_skb_irq(skb);
+ }
+ else
+ {
+ kaweth->stats.tx_packets++;
+ kaweth->stats.tx_bytes += skb->len;
+ net->trans_start = jiffies;
+ }
+
+ spin_unlock(&kaweth->device_lock);
+
+ return 0;
+}
+
+/****************************************************************
+ * kaweth_set_rx_mode
+ ****************************************************************/
+static void kaweth_set_rx_mode(struct net_device *net)
+{
+ struct kaweth_device *kaweth = netdev_priv(net);
+
+ __u16 packet_filter_bitmap = KAWETH_PACKET_FILTER_DIRECTED |
+ KAWETH_PACKET_FILTER_BROADCAST |
+ KAWETH_PACKET_FILTER_MULTICAST;
+
+ dbg("Setting Rx mode to %d", packet_filter_bitmap);
+
+ netif_stop_queue(net);
+
+ if (net->flags & IFF_PROMISC) {
+ packet_filter_bitmap |= KAWETH_PACKET_FILTER_PROMISCUOUS;
+ }
+ else if ((net->mc_count) || (net->flags & IFF_ALLMULTI)) {
+ packet_filter_bitmap |= KAWETH_PACKET_FILTER_ALL_MULTICAST;
+ }
+
+ kaweth->packet_filter_bitmap = packet_filter_bitmap;
+ netif_wake_queue(net);
+}
+
+/****************************************************************
+ * kaweth_async_set_rx_mode
+ ****************************************************************/
+static void kaweth_async_set_rx_mode(struct kaweth_device *kaweth)
+{
+ __u16 packet_filter_bitmap = kaweth->packet_filter_bitmap;
+ kaweth->packet_filter_bitmap = 0;
+ if (packet_filter_bitmap == 0)
+ return;
+
+ {
+ int result;
+ result = kaweth_control(kaweth,
+ usb_sndctrlpipe(kaweth->dev, 0),
+ KAWETH_COMMAND_SET_PACKET_FILTER,
+ USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_DEVICE,
+ packet_filter_bitmap,
+ 0,
+ (void *)&kaweth->scratch,
+ 0,
+ KAWETH_CONTROL_TIMEOUT);
+
+ if(result < 0) {
+ err("Failed to set Rx mode: %d", result);
+ }
+ else {
+ dbg("Set Rx mode to %d", packet_filter_bitmap);
+ }
+ }
+}
+
+/****************************************************************
+ * kaweth_netdev_stats
+ ****************************************************************/
+static struct net_device_stats *kaweth_netdev_stats(struct net_device *dev)
+{
+ struct kaweth_device *kaweth = netdev_priv(dev);
+ return &kaweth->stats;
+}
+
+/****************************************************************
+ * kaweth_tx_timeout
+ ****************************************************************/
+static void kaweth_tx_timeout(struct net_device *net)
+{
+ struct kaweth_device *kaweth = netdev_priv(net);
+
+ warn("%s: Tx timed out. Resetting.", net->name);
+ kaweth->stats.tx_errors++;
+ net->trans_start = jiffies;
+
+ usb_unlink_urb(kaweth->tx_urb);
+}
+
+/****************************************************************
+ * kaweth_suspend
+ ****************************************************************/
+static int kaweth_suspend(struct usb_interface *intf, pm_message_t message)
+{
+ struct kaweth_device *kaweth = usb_get_intfdata(intf);
+ unsigned long flags;
+
+ dbg("Suspending device");
+ spin_lock_irqsave(&kaweth->device_lock, flags);
+ kaweth->status |= KAWETH_STATUS_SUSPENDING;
+ spin_unlock_irqrestore(&kaweth->device_lock, flags);
+
+ kaweth_kill_urbs(kaweth);
+ return 0;
+}
+
+/****************************************************************
+ * kaweth_resume
+ ****************************************************************/
+static int kaweth_resume(struct usb_interface *intf)
+{
+ struct kaweth_device *kaweth = usb_get_intfdata(intf);
+ unsigned long flags;
+
+ dbg("Resuming device");
+ spin_lock_irqsave(&kaweth->device_lock, flags);
+ kaweth->status &= ~KAWETH_STATUS_SUSPENDING;
+ spin_unlock_irqrestore(&kaweth->device_lock, flags);
+
+ if (!kaweth->opened)
+ return 0;
+ kaweth_resubmit_rx_urb(kaweth, GFP_NOIO);
+ kaweth_resubmit_int_urb(kaweth, GFP_NOIO);
+
+ return 0;
+}
+
+/****************************************************************
+ * kaweth_probe
+ ****************************************************************/
+static int kaweth_probe(
+ struct usb_interface *intf,
+ const struct usb_device_id *id /* from id_table */
+ )
+{
+ struct usb_device *dev = interface_to_usbdev(intf);
+ struct kaweth_device *kaweth;
+ struct net_device *netdev;
+ const eth_addr_t bcast_addr = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF };
+ int result = 0;
+
+ dbg("Kawasaki Device Probe (Device number:%d): 0x%4.4x:0x%4.4x:0x%4.4x",
+ dev->devnum,
+ le16_to_cpu(dev->descriptor.idVendor),
+ le16_to_cpu(dev->descriptor.idProduct),
+ le16_to_cpu(dev->descriptor.bcdDevice));
+
+ dbg("Device at %p", dev);
+
+ dbg("Descriptor length: %x type: %x",
+ (int)dev->descriptor.bLength,
+ (int)dev->descriptor.bDescriptorType);
+
+ netdev = alloc_etherdev(sizeof(*kaweth));
+ if (!netdev)
+ return -ENOMEM;
+
+ kaweth = netdev_priv(netdev);
+ kaweth->dev = dev;
+ kaweth->net = netdev;
+
+ spin_lock_init(&kaweth->device_lock);
+ init_waitqueue_head(&kaweth->term_wait);
+
+ dbg("Resetting.");
+
+ kaweth_reset(kaweth);
+
+ /*
+ * If high byte of bcdDevice is nonzero, firmware is already
+ * downloaded. Don't try to do it again, or we'll hang the device.
+ */
+
+ if (le16_to_cpu(dev->descriptor.bcdDevice) >> 8) {
+ info("Firmware present in device.");
+ } else {
+ /* Download the firmware */
+ info("Downloading firmware...");
+ kaweth->firmware_buf = (__u8 *)__get_free_page(GFP_KERNEL);
+ if ((result = kaweth_download_firmware(kaweth,
+ kaweth_new_code,
+ len_kaweth_new_code,
+ 100,
+ 2)) < 0) {
+ err("Error downloading firmware (%d)", result);
+ goto err_fw;
+ }
+
+ if ((result = kaweth_download_firmware(kaweth,
+ kaweth_new_code_fix,
+ len_kaweth_new_code_fix,
+ 100,
+ 3)) < 0) {
+ err("Error downloading firmware fix (%d)", result);
+ goto err_fw;
+ }
+
+ if ((result = kaweth_download_firmware(kaweth,
+ kaweth_trigger_code,
+ len_kaweth_trigger_code,
+ 126,
+ 2)) < 0) {
+ err("Error downloading trigger code (%d)", result);
+ goto err_fw;
+
+ }
+
+ if ((result = kaweth_download_firmware(kaweth,
+ kaweth_trigger_code_fix,
+ len_kaweth_trigger_code_fix,
+ 126,
+ 3)) < 0) {
+ err("Error downloading trigger code fix (%d)", result);
+ goto err_fw;
+ }
+
+
+ if ((result = kaweth_trigger_firmware(kaweth, 126)) < 0) {
+ err("Error triggering firmware (%d)", result);
+ goto err_fw;
+ }
+
+ /* Device will now disappear for a moment... */
+ info("Firmware loaded. I'll be back...");
+err_fw:
+ free_page((unsigned long)kaweth->firmware_buf);
+ free_netdev(netdev);
+ return -EIO;
+ }
+
+ result = kaweth_read_configuration(kaweth);
+
+ if(result < 0) {
+ err("Error reading configuration (%d), no net device created", result);
+ goto err_free_netdev;
+ }
+
+ info("Statistics collection: %x", kaweth->configuration.statistics_mask);
+ info("Multicast filter limit: %x", kaweth->configuration.max_multicast_filters & ((1 << 15) - 1));
+ info("MTU: %d", le16_to_cpu(kaweth->configuration.segment_size));
+ info("Read MAC address %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x",
+ (int)kaweth->configuration.hw_addr[0],
+ (int)kaweth->configuration.hw_addr[1],
+ (int)kaweth->configuration.hw_addr[2],
+ (int)kaweth->configuration.hw_addr[3],
+ (int)kaweth->configuration.hw_addr[4],
+ (int)kaweth->configuration.hw_addr[5]);
+
+ if(!memcmp(&kaweth->configuration.hw_addr,
+ &bcast_addr,
+ sizeof(bcast_addr))) {
+ err("Firmware not functioning properly, no net device created");
+ goto err_free_netdev;
+ }
+
+ if(kaweth_set_urb_size(kaweth, KAWETH_BUF_SIZE) < 0) {
+ dbg("Error setting URB size");
+ goto err_free_netdev;
+ }
+
+ if(kaweth_set_sofs_wait(kaweth, KAWETH_SOFS_TO_WAIT) < 0) {
+ err("Error setting SOFS wait");
+ goto err_free_netdev;
+ }
+
+ result = kaweth_set_receive_filter(kaweth,
+ KAWETH_PACKET_FILTER_DIRECTED |
+ KAWETH_PACKET_FILTER_BROADCAST |
+ KAWETH_PACKET_FILTER_MULTICAST);
+
+ if(result < 0) {
+ err("Error setting receive filter");
+ goto err_free_netdev;
+ }
+
+ dbg("Initializing net device.");
+
+ kaweth->intf = intf;
+
+ kaweth->tx_urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!kaweth->tx_urb)
+ goto err_free_netdev;
+ kaweth->rx_urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!kaweth->rx_urb)
+ goto err_only_tx;
+ kaweth->irq_urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!kaweth->irq_urb)
+ goto err_tx_and_rx;
+
+ kaweth->intbuffer = usb_buffer_alloc( kaweth->dev,
+ INTBUFFERSIZE,
+ GFP_KERNEL,
+ &kaweth->intbufferhandle);
+ if (!kaweth->intbuffer)
+ goto err_tx_and_rx_and_irq;
+ kaweth->rx_buf = usb_buffer_alloc( kaweth->dev,
+ KAWETH_BUF_SIZE,
+ GFP_KERNEL,
+ &kaweth->rxbufferhandle);
+ if (!kaweth->rx_buf)
+ goto err_all_but_rxbuf;
+
+ memcpy(netdev->broadcast, &bcast_addr, sizeof(bcast_addr));
+ memcpy(netdev->dev_addr, &kaweth->configuration.hw_addr,
+ sizeof(kaweth->configuration.hw_addr));
+
+ netdev->open = kaweth_open;
+ netdev->stop = kaweth_close;
+
+ netdev->watchdog_timeo = KAWETH_TX_TIMEOUT;
+ netdev->tx_timeout = kaweth_tx_timeout;
+
+ netdev->hard_start_xmit = kaweth_start_xmit;
+ netdev->set_multicast_list = kaweth_set_rx_mode;
+ netdev->get_stats = kaweth_netdev_stats;
+ netdev->mtu = le16_to_cpu(kaweth->configuration.segment_size);
+ SET_ETHTOOL_OPS(netdev, &ops);
+
+ /* kaweth is zeroed as part of alloc_netdev */
+
+ INIT_DELAYED_WORK(&kaweth->lowmem_work, kaweth_resubmit_tl);
+
+ SET_MODULE_OWNER(netdev);
+
+ usb_set_intfdata(intf, kaweth);
+
+#if 0
+// dma_supported() is deeply broken on almost all architectures
+ if (dma_supported (&intf->dev, 0xffffffffffffffffULL))
+ kaweth->net->features |= NETIF_F_HIGHDMA;
+#endif
+
+ SET_NETDEV_DEV(netdev, &intf->dev);
+ if (register_netdev(netdev) != 0) {
+ err("Error registering netdev.");
+ goto err_intfdata;
+ }
+
+ info("kaweth interface created at %s", kaweth->net->name);
+
+ dbg("Kaweth probe returning.");
+
+ return 0;
+
+err_intfdata:
+ usb_set_intfdata(intf, NULL);
+ usb_buffer_free(kaweth->dev, KAWETH_BUF_SIZE, (void *)kaweth->rx_buf, kaweth->rxbufferhandle);
+err_all_but_rxbuf:
+ usb_buffer_free(kaweth->dev, INTBUFFERSIZE, (void *)kaweth->intbuffer, kaweth->intbufferhandle);
+err_tx_and_rx_and_irq:
+ usb_free_urb(kaweth->irq_urb);
+err_tx_and_rx:
+ usb_free_urb(kaweth->rx_urb);
+err_only_tx:
+ usb_free_urb(kaweth->tx_urb);
+err_free_netdev:
+ free_netdev(netdev);
+
+ return -EIO;
+}
+
+/****************************************************************
+ * kaweth_disconnect
+ ****************************************************************/
+static void kaweth_disconnect(struct usb_interface *intf)
+{
+ struct kaweth_device *kaweth = usb_get_intfdata(intf);
+ struct net_device *netdev;
+
+ info("Unregistering");
+
+ usb_set_intfdata(intf, NULL);
+ if (!kaweth) {
+ warn("unregistering non-existant device");
+ return;
+ }
+ netdev = kaweth->net;
+
+ dbg("Unregistering net device");
+ unregister_netdev(netdev);
+
+ usb_free_urb(kaweth->rx_urb);
+ usb_free_urb(kaweth->tx_urb);
+ usb_free_urb(kaweth->irq_urb);
+
+ usb_buffer_free(kaweth->dev, KAWETH_BUF_SIZE, (void *)kaweth->rx_buf, kaweth->rxbufferhandle);
+ usb_buffer_free(kaweth->dev, INTBUFFERSIZE, (void *)kaweth->intbuffer, kaweth->intbufferhandle);
+
+ free_netdev(netdev);
+}
+
+
+// FIXME this completion stuff is a modified clone of
+// an OLD version of some stuff in usb.c ...
+struct usb_api_data {
+ wait_queue_head_t wqh;
+ int done;
+};
+
+/*-------------------------------------------------------------------*
+ * completion handler for compatibility wrappers (sync control/bulk) *
+ *-------------------------------------------------------------------*/
+static void usb_api_blocking_completion(struct urb *urb)
+{
+ struct usb_api_data *awd = (struct usb_api_data *)urb->context;
+
+ awd->done=1;
+ wake_up(&awd->wqh);
+}
+
+/*-------------------------------------------------------------------*
+ * COMPATIBILITY STUFF *
+ *-------------------------------------------------------------------*/
+
+// Starts urb and waits for completion or timeout
+static int usb_start_wait_urb(struct urb *urb, int timeout, int* actual_length)
+{
+ struct usb_api_data awd;
+ int status;
+
+ init_waitqueue_head(&awd.wqh);
+ awd.done = 0;
+
+ urb->context = &awd;
+ status = usb_submit_urb(urb, GFP_NOIO);
+ if (status) {
+ // something went wrong
+ usb_free_urb(urb);
+ return status;
+ }
+
+ if (!wait_event_timeout(awd.wqh, awd.done, timeout)) {
+ // timeout
+ warn("usb_control/bulk_msg: timeout");
+ usb_kill_urb(urb); // remove urb safely
+ status = -ETIMEDOUT;
+ }
+ else {
+ status = urb->status;
+ }
+
+ if (actual_length) {
+ *actual_length = urb->actual_length;
+ }
+
+ usb_free_urb(urb);
+ return status;
+}
+
+/*-------------------------------------------------------------------*/
+// returns status (negative) or length (positive)
+static int kaweth_internal_control_msg(struct usb_device *usb_dev,
+ unsigned int pipe,
+ struct usb_ctrlrequest *cmd, void *data,
+ int len, int timeout)
+{
+ struct urb *urb;
+ int retv;
+ int length = 0; /* shut up GCC */
+
+ urb = usb_alloc_urb(0, GFP_NOIO);
+ if (!urb)
+ return -ENOMEM;
+
+ usb_fill_control_urb(urb, usb_dev, pipe, (unsigned char*)cmd, data,
+ len, usb_api_blocking_completion, NULL);
+
+ retv = usb_start_wait_urb(urb, timeout, &length);
+ if (retv < 0) {
+ return retv;
+ }
+ else {
+ return length;
+ }
+}
+
+
+/****************************************************************
+ * kaweth_init
+ ****************************************************************/
+static int __init kaweth_init(void)
+{
+ dbg("Driver loading");
+ return usb_register(&kaweth_driver);
+}
+
+/****************************************************************
+ * kaweth_exit
+ ****************************************************************/
+static void __exit kaweth_exit(void)
+{
+ usb_deregister(&kaweth_driver);
+}
+
+module_init(kaweth_init);
+module_exit(kaweth_exit);
+
+
+
+
+
+
+
+
+
diff --git a/drivers/net/usb/kawethfw.h b/drivers/net/usb/kawethfw.h
new file mode 100644
index 0000000..cf85fcb
--- /dev/null
+++ b/drivers/net/usb/kawethfw.h
@@ -0,0 +1,557 @@
+/******************************************/
+/* NOTE: B6/C3 is data header signature */
+/* 0xAA/0xBB is data length = total */
+/* bytes - 7, 0xCC is type, 0xDD is */
+/* interrupt to use. */
+/******************************************/
+
+/****************************************************************
+ * kaweth_trigger_code
+ ****************************************************************/
+static __u8 kaweth_trigger_code[] =
+{
+ 0xB6, 0xC3, 0xAA, 0xBB, 0xCC, 0xDD,
+ 0xc8, 0x07, 0xa0, 0x00, 0xf0, 0x07, 0x5e, 0x00,
+ 0x06, 0x00, 0xf0, 0x07, 0x0a, 0x00, 0x08, 0x00,
+ 0xf0, 0x09, 0x00, 0x00, 0x02, 0x00, 0xe7, 0x07,
+ 0x36, 0x00, 0x00, 0x00, 0xf0, 0x07, 0x00, 0x00,
+ 0x04, 0x00, 0xe7, 0x07, 0x50, 0xc3, 0x10, 0xc0,
+ 0xf0, 0x09, 0x0e, 0xc0, 0x00, 0x00, 0xe7, 0x87,
+ 0x01, 0x00, 0x0e, 0xc0, 0x97, 0xcf, 0xd7, 0x09,
+ 0x00, 0xc0, 0x17, 0x02, 0xc8, 0x07, 0xa0, 0x00,
+ 0xe7, 0x17, 0x50, 0xc3, 0x10, 0xc0, 0x30, 0xd8,
+ 0x04, 0x00, 0x30, 0x5c, 0x08, 0x00, 0x04, 0x00,
+ 0xb0, 0xc0, 0x06, 0x00, 0xc8, 0x05, 0xe7, 0x05,
+ 0x00, 0xc0, 0xc0, 0xdf, 0x97, 0xcf, 0x49, 0xaf,
+ 0xc0, 0x07, 0x00, 0x00, 0x60, 0xaf, 0x4a, 0xaf,
+ 0x00, 0x0c, 0x0c, 0x00, 0x40, 0xd2, 0x00, 0x1c,
+ 0x0c, 0x00, 0x40, 0xd2, 0x30, 0x00, 0x08, 0x00,
+ 0xf0, 0x07, 0x00, 0x00, 0x04, 0x00, 0xf0, 0x07,
+ 0x86, 0x00, 0x06, 0x00, 0x67, 0xcf, 0x27, 0x0c,
+ 0x02, 0x00, 0x00, 0x00, 0x27, 0x0c, 0x00, 0x00,
+ 0x0e, 0xc0, 0x49, 0xaf, 0x64, 0xaf, 0xc0, 0x07,
+ 0x00, 0x00, 0x4b, 0xaf, 0x4a, 0xaf, 0x5a, 0xcf,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x94, 0x00, 0x05, 0x00,
+ 0x00, 0x00
+};
+/****************************************************************
+ * kaweth_trigger_code_fix
+ ****************************************************************/
+static __u8 kaweth_trigger_code_fix[] =
+{
+ 0xB6, 0xC3, 0xAA, 0xBB, 0xCC, 0xDD,
+ 0x02, 0x00, 0x06, 0x00, 0x18, 0x00, 0x3e, 0x00,
+ 0x80, 0x00, 0x98, 0x00, 0xaa, 0x00,
+ 0x00, 0x00
+};
+
+/****************************************************************
+ * kaweth_new_code
+ ****************************************************************/
+static __u8 kaweth_new_code[] =
+{
+ 0xB6, 0xC3, 0xAA, 0xBB, 0xCC, 0xDD,
+ 0x9f, 0xcf, 0xde, 0x06, 0xe7, 0x57, 0x00, 0x00,
+ 0xc4, 0x06, 0x97, 0xc1, 0xe7, 0x67, 0xff, 0x1f,
+ 0x28, 0xc0, 0xe7, 0x87, 0x00, 0x04, 0x24, 0xc0,
+ 0xe7, 0x67, 0xff, 0xf9, 0x22, 0xc0, 0x97, 0xcf,
+ 0xd7, 0x09, 0x00, 0xc0, 0xe7, 0x09, 0xa2, 0xc0,
+ 0xbe, 0x06, 0x9f, 0xaf, 0x36, 0x00, 0xe7, 0x05,
+ 0x00, 0xc0, 0xa7, 0xcf, 0xbc, 0x06, 0x97, 0xcf,
+ 0xe7, 0x57, 0x00, 0x00, 0xb8, 0x06, 0xa7, 0xa1,
+ 0xb8, 0x06, 0x97, 0xcf, 0xe7, 0x57, 0x00, 0x00,
+ 0x14, 0x08, 0x0a, 0xc0, 0xe7, 0x57, 0x00, 0x00,
+ 0xa4, 0xc0, 0xa7, 0xc0, 0x7a, 0x06, 0x9f, 0xaf,
+ 0x92, 0x07, 0xe7, 0x07, 0x00, 0x00, 0x14, 0x08,
+ 0xe7, 0x57, 0xff, 0xff, 0xba, 0x06, 0x9f, 0xa0,
+ 0x38, 0x00, 0xe7, 0x59, 0xba, 0x06, 0xbe, 0x06,
+ 0x9f, 0xa0, 0x38, 0x00, 0xc8, 0x09, 0xca, 0x06,
+ 0x08, 0x62, 0x9f, 0xa1, 0x36, 0x08, 0xc0, 0x09,
+ 0x76, 0x06, 0x00, 0x60, 0xa7, 0xc0, 0x7a, 0x06,
+ 0x9f, 0xaf, 0xcc, 0x02, 0xe7, 0x57, 0x00, 0x00,
+ 0xb8, 0x06, 0xa7, 0xc1, 0x7a, 0x06, 0x9f, 0xaf,
+ 0x04, 0x00, 0xe7, 0x57, 0x00, 0x00, 0x8e, 0x06,
+ 0x0a, 0xc1, 0xe7, 0x09, 0x20, 0xc0, 0x10, 0x08,
+ 0xe7, 0xd0, 0x10, 0x08, 0xe7, 0x67, 0x40, 0x00,
+ 0x10, 0x08, 0x9f, 0xaf, 0x92, 0x0c, 0xc0, 0x09,
+ 0xd0, 0x06, 0x00, 0x60, 0x05, 0xc4, 0xc0, 0x59,
+ 0xbe, 0x06, 0x02, 0xc0, 0x9f, 0xaf, 0xec, 0x00,
+ 0x9f, 0xaf, 0x34, 0x02, 0xe7, 0x57, 0x00, 0x00,
+ 0xa6, 0x06, 0x9f, 0xa0, 0x7a, 0x02, 0xa7, 0xcf,
+ 0x7a, 0x06, 0x48, 0x02, 0xe7, 0x09, 0xbe, 0x06,
+ 0xd0, 0x06, 0xc8, 0x37, 0x04, 0x00, 0x9f, 0xaf,
+ 0x08, 0x03, 0x97, 0xcf, 0xe7, 0x57, 0x00, 0x00,
+ 0xce, 0x06, 0x97, 0xc0, 0xd7, 0x09, 0x00, 0xc0,
+ 0xc1, 0xdf, 0xc8, 0x09, 0xc6, 0x06, 0x08, 0x62,
+ 0x14, 0xc0, 0x27, 0x04, 0xc6, 0x06, 0x10, 0x94,
+ 0xf0, 0x07, 0x10, 0x08, 0x02, 0x00, 0xc1, 0x07,
+ 0x01, 0x00, 0x70, 0x00, 0x04, 0x00, 0xf0, 0x07,
+ 0x30, 0x01, 0x06, 0x00, 0x50, 0xaf, 0xe7, 0x07,
+ 0xff, 0xff, 0xd0, 0x06, 0xe7, 0x07, 0x00, 0x00,
+ 0xce, 0x06, 0xe7, 0x05, 0x00, 0xc0, 0x97, 0xcf,
+ 0xd7, 0x09, 0x00, 0xc0, 0xc1, 0xdf, 0x48, 0x02,
+ 0xd0, 0x09, 0xc6, 0x06, 0x27, 0x02, 0xc6, 0x06,
+ 0xe7, 0x05, 0x00, 0xc0, 0x97, 0xcf, 0x48, 0x02,
+ 0xc8, 0x37, 0x04, 0x00, 0x00, 0x0c, 0x0c, 0x00,
+ 0x00, 0x60, 0x21, 0xc0, 0xc0, 0x37, 0x3e, 0x00,
+ 0x23, 0xc9, 0xc0, 0x57, 0xb4, 0x05, 0x1b, 0xc8,
+ 0xc0, 0x17, 0x3f, 0x00, 0xc0, 0x67, 0xc0, 0xff,
+ 0x30, 0x00, 0x08, 0x00, 0xf0, 0x07, 0x00, 0x00,
+ 0x04, 0x00, 0x00, 0x02, 0xc0, 0x17, 0x4c, 0x00,
+ 0x30, 0x00, 0x06, 0x00, 0xf0, 0x07, 0xa0, 0x01,
+ 0x0a, 0x00, 0x48, 0x02, 0xc1, 0x07, 0x02, 0x00,
+ 0xd7, 0x09, 0x00, 0xc0, 0xc1, 0xdf, 0x51, 0xaf,
+ 0xe7, 0x05, 0x00, 0xc0, 0x97, 0xcf, 0x9f, 0xaf,
+ 0x08, 0x03, 0x9f, 0xaf, 0x7a, 0x02, 0x97, 0xcf,
+ 0x9f, 0xaf, 0x7a, 0x02, 0xc9, 0x37, 0x04, 0x00,
+ 0xc1, 0xdf, 0xc8, 0x09, 0xa2, 0x06, 0x50, 0x02,
+ 0x67, 0x02, 0xa2, 0x06, 0xd1, 0x07, 0x00, 0x00,
+ 0x27, 0xd8, 0xaa, 0x06, 0xc0, 0xdf, 0x9f, 0xaf,
+ 0xc4, 0x01, 0x97, 0xcf, 0xe7, 0x57, 0x00, 0x00,
+ 0xd2, 0x06, 0x97, 0xc1, 0xe7, 0x57, 0x01, 0x00,
+ 0xa8, 0x06, 0x97, 0xc0, 0xc8, 0x09, 0xa0, 0x06,
+ 0x08, 0x62, 0x97, 0xc0, 0x00, 0x02, 0xc0, 0x17,
+ 0x0e, 0x00, 0x27, 0x00, 0x34, 0x01, 0x27, 0x0c,
+ 0x0c, 0x00, 0x36, 0x01, 0xe7, 0x07, 0x50, 0xc3,
+ 0x12, 0xc0, 0xe7, 0x07, 0xcc, 0x0b, 0x02, 0x00,
+ 0xe7, 0x07, 0x01, 0x00, 0xa8, 0x06, 0xe7, 0x07,
+ 0x05, 0x00, 0x90, 0xc0, 0x97, 0xcf, 0xc8, 0x09,
+ 0xa4, 0x06, 0x08, 0x62, 0x02, 0xc0, 0x10, 0x64,
+ 0x07, 0xc1, 0xe7, 0x07, 0x00, 0x00, 0x9e, 0x06,
+ 0xe7, 0x07, 0x72, 0x04, 0x24, 0x00, 0x97, 0xcf,
+ 0x27, 0x04, 0xa4, 0x06, 0xc8, 0x17, 0x0e, 0x00,
+ 0x27, 0x02, 0x9e, 0x06, 0xe7, 0x07, 0x80, 0x04,
+ 0x24, 0x00, 0x97, 0xcf, 0xd7, 0x09, 0x00, 0xc0,
+ 0xc1, 0xdf, 0xe7, 0x57, 0x00, 0x00, 0x90, 0x06,
+ 0x13, 0xc1, 0x9f, 0xaf, 0x06, 0x02, 0xe7, 0x57,
+ 0x00, 0x00, 0x9e, 0x06, 0x13, 0xc0, 0xe7, 0x09,
+ 0x9e, 0x06, 0x30, 0x01, 0xe7, 0x07, 0xf2, 0x05,
+ 0x32, 0x01, 0xe7, 0x07, 0x10, 0x00, 0x96, 0xc0,
+ 0xe7, 0x09, 0x9e, 0x06, 0x90, 0x06, 0x04, 0xcf,
+ 0xe7, 0x57, 0x00, 0x00, 0x9e, 0x06, 0x02, 0xc1,
+ 0x9f, 0xaf, 0x06, 0x02, 0xe7, 0x05, 0x00, 0xc0,
+ 0x97, 0xcf, 0xd7, 0x09, 0x00, 0xc0, 0xc1, 0xdf,
+ 0x08, 0x92, 0xe7, 0x57, 0x02, 0x00, 0xaa, 0x06,
+ 0x02, 0xc3, 0xc8, 0x09, 0xa4, 0x06, 0x27, 0x02,
+ 0xa6, 0x06, 0x08, 0x62, 0x03, 0xc1, 0xe7, 0x05,
+ 0x00, 0xc0, 0x97, 0xcf, 0x27, 0x04, 0xa4, 0x06,
+ 0xe7, 0x05, 0x00, 0xc0, 0xf0, 0x07, 0x40, 0x00,
+ 0x08, 0x00, 0xf0, 0x07, 0x00, 0x00, 0x04, 0x00,
+ 0x00, 0x02, 0xc0, 0x17, 0x0c, 0x00, 0x30, 0x00,
+ 0x06, 0x00, 0xf0, 0x07, 0x46, 0x01, 0x0a, 0x00,
+ 0xc8, 0x17, 0x04, 0x00, 0xc1, 0x07, 0x02, 0x00,
+ 0x51, 0xaf, 0x97, 0xcf, 0xe7, 0x57, 0x00, 0x00,
+ 0x96, 0x06, 0x97, 0xc0, 0xc1, 0xdf, 0xc8, 0x09,
+ 0x96, 0x06, 0x27, 0x04, 0x96, 0x06, 0x27, 0x52,
+ 0x98, 0x06, 0x03, 0xc1, 0xe7, 0x07, 0x96, 0x06,
+ 0x98, 0x06, 0xc0, 0xdf, 0x17, 0x02, 0xc8, 0x17,
+ 0x0e, 0x00, 0x9f, 0xaf, 0xba, 0x03, 0xc8, 0x05,
+ 0x00, 0x60, 0x03, 0xc0, 0x9f, 0xaf, 0x24, 0x03,
+ 0x97, 0xcf, 0x9f, 0xaf, 0x08, 0x03, 0x97, 0xcf,
+ 0x57, 0x02, 0xc9, 0x07, 0xa4, 0x06, 0xd7, 0x09,
+ 0x00, 0xc0, 0xc1, 0xdf, 0x08, 0x62, 0x1b, 0xc0,
+ 0x50, 0x04, 0x11, 0x02, 0xe7, 0x05, 0x00, 0xc0,
+ 0xc9, 0x05, 0x97, 0xcf, 0x97, 0x02, 0xca, 0x09,
+ 0xd6, 0x06, 0xf2, 0x17, 0x01, 0x00, 0x04, 0x00,
+ 0xf2, 0x27, 0x00, 0x00, 0x06, 0x00, 0xca, 0x17,
+ 0x2c, 0x00, 0xf8, 0x77, 0x01, 0x00, 0x0e, 0x00,
+ 0x06, 0xc0, 0xca, 0xd9, 0xf8, 0x57, 0xff, 0x00,
+ 0x0e, 0x00, 0x01, 0xc1, 0xca, 0xd9, 0x22, 0x1c,
+ 0x0c, 0x00, 0xe2, 0x27, 0x00, 0x00, 0xe2, 0x17,
+ 0x01, 0x00, 0xe2, 0x27, 0x00, 0x00, 0xca, 0x05,
+ 0x00, 0x0c, 0x0c, 0x00, 0xc0, 0x17, 0x41, 0x00,
+ 0xc0, 0x67, 0xc0, 0xff, 0x30, 0x00, 0x08, 0x00,
+ 0x00, 0x02, 0xc0, 0x17, 0x0c, 0x00, 0x30, 0x00,
+ 0x06, 0x00, 0xf0, 0x07, 0xda, 0x00, 0x0a, 0x00,
+ 0xf0, 0x07, 0x00, 0x00, 0x04, 0x00, 0x00, 0x0c,
+ 0x08, 0x00, 0x40, 0xd1, 0x01, 0x00, 0xc0, 0x19,
+ 0xce, 0x06, 0xc0, 0x59, 0xc2, 0x06, 0x04, 0xc9,
+ 0x49, 0xaf, 0x9f, 0xaf, 0xec, 0x00, 0x4a, 0xaf,
+ 0x67, 0x10, 0xce, 0x06, 0xc8, 0x17, 0x04, 0x00,
+ 0xc1, 0x07, 0x01, 0x00, 0xd7, 0x09, 0x00, 0xc0,
+ 0xc1, 0xdf, 0x50, 0xaf, 0xe7, 0x05, 0x00, 0xc0,
+ 0x97, 0xcf, 0xc0, 0x07, 0x01, 0x00, 0xc1, 0x09,
+ 0xac, 0x06, 0xc1, 0x77, 0x01, 0x00, 0x97, 0xc1,
+ 0xd8, 0x77, 0x01, 0x00, 0x12, 0xc0, 0xc9, 0x07,
+ 0x6a, 0x06, 0x9f, 0xaf, 0x08, 0x04, 0x04, 0xc1,
+ 0xc1, 0x77, 0x08, 0x00, 0x13, 0xc0, 0x97, 0xcf,
+ 0xc1, 0x77, 0x02, 0x00, 0x97, 0xc1, 0xc1, 0x77,
+ 0x10, 0x00, 0x0c, 0xc0, 0x9f, 0xaf, 0x2c, 0x04,
+ 0x97, 0xcf, 0xc1, 0x77, 0x04, 0x00, 0x06, 0xc0,
+ 0xc9, 0x07, 0x70, 0x06, 0x9f, 0xaf, 0x08, 0x04,
+ 0x97, 0xc0, 0x00, 0xcf, 0x00, 0x90, 0x97, 0xcf,
+ 0x50, 0x54, 0x97, 0xc1, 0x70, 0x5c, 0x02, 0x00,
+ 0x02, 0x00, 0x97, 0xc1, 0x70, 0x5c, 0x04, 0x00,
+ 0x04, 0x00, 0x97, 0xcf, 0x80, 0x01, 0xc0, 0x00,
+ 0x60, 0x00, 0x30, 0x00, 0x18, 0x00, 0x0c, 0x00,
+ 0x06, 0x00, 0x00, 0x00, 0xcb, 0x09, 0xb2, 0x06,
+ 0xcc, 0x09, 0xb4, 0x06, 0x0b, 0x53, 0x11, 0xc0,
+ 0xc9, 0x02, 0xca, 0x07, 0x1c, 0x04, 0x9f, 0xaf,
+ 0x08, 0x04, 0x97, 0xc0, 0x0a, 0xc8, 0x82, 0x08,
+ 0x0a, 0xcf, 0x82, 0x08, 0x9f, 0xaf, 0x08, 0x04,
+ 0x97, 0xc0, 0x05, 0xc2, 0x89, 0x30, 0x82, 0x60,
+ 0x78, 0xc1, 0x00, 0x90, 0x97, 0xcf, 0x89, 0x10,
+ 0x09, 0x53, 0x79, 0xc2, 0x89, 0x30, 0x82, 0x08,
+ 0x7a, 0xcf, 0xc0, 0xdf, 0x97, 0xcf, 0xc0, 0xdf,
+ 0x97, 0xcf, 0xe7, 0x09, 0x96, 0xc0, 0x92, 0x06,
+ 0xe7, 0x09, 0x98, 0xc0, 0x94, 0x06, 0x0f, 0xcf,
+ 0xe7, 0x09, 0x96, 0xc0, 0x92, 0x06, 0xe7, 0x09,
+ 0x98, 0xc0, 0x94, 0x06, 0xe7, 0x09, 0x9e, 0x06,
+ 0x30, 0x01, 0xe7, 0x07, 0xf2, 0x05, 0x32, 0x01,
+ 0xe7, 0x07, 0x10, 0x00, 0x96, 0xc0, 0xd7, 0x09,
+ 0x00, 0xc0, 0x17, 0x02, 0xc8, 0x09, 0x90, 0x06,
+ 0xc8, 0x37, 0x0e, 0x00, 0xe7, 0x77, 0x2a, 0x00,
+ 0x92, 0x06, 0x30, 0xc0, 0x97, 0x02, 0xca, 0x09,
+ 0xd6, 0x06, 0xe7, 0x77, 0x20, 0x00, 0x92, 0x06,
+ 0x0e, 0xc0, 0xf2, 0x17, 0x01, 0x00, 0x10, 0x00,
+ 0xf2, 0x27, 0x00, 0x00, 0x12, 0x00, 0xe7, 0x77,
+ 0x0a, 0x00, 0x92, 0x06, 0xca, 0x05, 0x1e, 0xc0,
+ 0x97, 0x02, 0xca, 0x09, 0xd6, 0x06, 0xf2, 0x17,
+ 0x01, 0x00, 0x0c, 0x00, 0xf2, 0x27, 0x00, 0x00,
+ 0x0e, 0x00, 0xe7, 0x77, 0x02, 0x00, 0x92, 0x06,
+ 0x07, 0xc0, 0xf2, 0x17, 0x01, 0x00, 0x44, 0x00,
+ 0xf2, 0x27, 0x00, 0x00, 0x46, 0x00, 0x06, 0xcf,
+ 0xf2, 0x17, 0x01, 0x00, 0x60, 0x00, 0xf2, 0x27,
+ 0x00, 0x00, 0x62, 0x00, 0xca, 0x05, 0x9f, 0xaf,
+ 0x08, 0x03, 0x0f, 0xcf, 0x57, 0x02, 0x09, 0x02,
+ 0xf1, 0x09, 0x94, 0x06, 0x0c, 0x00, 0xf1, 0xda,
+ 0x0c, 0x00, 0xc8, 0x09, 0x98, 0x06, 0x50, 0x02,
+ 0x67, 0x02, 0x98, 0x06, 0xd1, 0x07, 0x00, 0x00,
+ 0xc9, 0x05, 0xe7, 0x09, 0x9e, 0x06, 0x90, 0x06,
+ 0xe7, 0x57, 0x00, 0x00, 0x90, 0x06, 0x02, 0xc0,
+ 0x9f, 0xaf, 0x06, 0x02, 0xc8, 0x05, 0xe7, 0x05,
+ 0x00, 0xc0, 0xc0, 0xdf, 0x97, 0xcf, 0xd7, 0x09,
+ 0x00, 0xc0, 0x17, 0x00, 0x17, 0x02, 0x97, 0x02,
+ 0xc0, 0x09, 0x92, 0xc0, 0xe7, 0x07, 0x04, 0x00,
+ 0x90, 0xc0, 0xca, 0x09, 0xd6, 0x06, 0xe7, 0x07,
+ 0x00, 0x00, 0xa8, 0x06, 0xe7, 0x07, 0x6a, 0x04,
+ 0x02, 0x00, 0xc0, 0x77, 0x02, 0x00, 0x08, 0xc0,
+ 0xf2, 0x17, 0x01, 0x00, 0x50, 0x00, 0xf2, 0x27,
+ 0x00, 0x00, 0x52, 0x00, 0x9f, 0xcf, 0x24, 0x06,
+ 0xc0, 0x77, 0x10, 0x00, 0x06, 0xc0, 0xf2, 0x17,
+ 0x01, 0x00, 0x58, 0x00, 0xf2, 0x27, 0x00, 0x00,
+ 0x5a, 0x00, 0xc0, 0x77, 0x80, 0x00, 0x06, 0xc0,
+ 0xf2, 0x17, 0x01, 0x00, 0x70, 0x00, 0xf2, 0x27,
+ 0x00, 0x00, 0x72, 0x00, 0xc0, 0x77, 0x08, 0x00,
+ 0x1d, 0xc1, 0xf2, 0x17, 0x01, 0x00, 0x08, 0x00,
+ 0xf2, 0x27, 0x00, 0x00, 0x0a, 0x00, 0xc0, 0x77,
+ 0x00, 0x02, 0x06, 0xc0, 0xf2, 0x17, 0x01, 0x00,
+ 0x64, 0x00, 0xf2, 0x27, 0x00, 0x00, 0x66, 0x00,
+ 0xc0, 0x77, 0x40, 0x00, 0x06, 0xc0, 0xf2, 0x17,
+ 0x01, 0x00, 0x5c, 0x00, 0xf2, 0x27, 0x00, 0x00,
+ 0x5e, 0x00, 0xc0, 0x77, 0x01, 0x00, 0x01, 0xc0,
+ 0x1b, 0xcf, 0x1a, 0xcf, 0xf2, 0x17, 0x01, 0x00,
+ 0x00, 0x00, 0xf2, 0x27, 0x00, 0x00, 0x02, 0x00,
+ 0xc8, 0x09, 0x34, 0x01, 0xca, 0x17, 0x14, 0x00,
+ 0xd8, 0x77, 0x01, 0x00, 0x05, 0xc0, 0xca, 0xd9,
+ 0xd8, 0x57, 0xff, 0x00, 0x01, 0xc0, 0xca, 0xd9,
+ 0xe2, 0x19, 0x94, 0xc0, 0xe2, 0x27, 0x00, 0x00,
+ 0xe2, 0x17, 0x01, 0x00, 0xe2, 0x27, 0x00, 0x00,
+ 0x9f, 0xaf, 0x40, 0x06, 0x9f, 0xaf, 0xc4, 0x01,
+ 0xe7, 0x57, 0x00, 0x00, 0xd2, 0x06, 0x9f, 0xa1,
+ 0x0e, 0x0a, 0xca, 0x05, 0xc8, 0x05, 0xc0, 0x05,
+ 0xe7, 0x05, 0x00, 0xc0, 0xc0, 0xdf, 0x97, 0xcf,
+ 0xc8, 0x09, 0xa0, 0x06, 0x08, 0x62, 0x97, 0xc0,
+ 0x27, 0x04, 0xa0, 0x06, 0x27, 0x52, 0xa2, 0x06,
+ 0x03, 0xc1, 0xe7, 0x07, 0xa0, 0x06, 0xa2, 0x06,
+ 0x9f, 0xaf, 0x08, 0x03, 0xe7, 0x57, 0x00, 0x00,
+ 0xaa, 0x06, 0x02, 0xc0, 0x27, 0xda, 0xaa, 0x06,
+ 0x97, 0xcf, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x3f, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0xff, 0xff, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0xff, 0xff, 0xfb, 0x13, 0xe7, 0x57,
+ 0x00, 0x80, 0xb2, 0x00, 0x06, 0xc2, 0xe7, 0x07,
+ 0xee, 0x0b, 0x12, 0x00, 0xe7, 0x07, 0x34, 0x0c,
+ 0xb2, 0x00, 0xe7, 0x07, 0xc6, 0x07, 0xf2, 0x02,
+ 0xc8, 0x09, 0xb4, 0x00, 0xf8, 0x07, 0x02, 0x00,
+ 0x0d, 0x00, 0xd7, 0x09, 0x0e, 0xc0, 0xe7, 0x07,
+ 0x00, 0x00, 0x0e, 0xc0, 0xc8, 0x09, 0xde, 0x00,
+ 0xc8, 0x17, 0x09, 0x00, 0xc9, 0x07, 0xda, 0x06,
+ 0xc0, 0x07, 0x04, 0x00, 0x68, 0x0a, 0x00, 0xda,
+ 0x7d, 0xc1, 0xe7, 0x09, 0xc0, 0x00, 0x7c, 0x06,
+ 0xe7, 0x09, 0xbe, 0x00, 0x78, 0x06, 0xe7, 0x09,
+ 0x10, 0x00, 0xbc, 0x06, 0xc8, 0x07, 0xd6, 0x07,
+ 0x9f, 0xaf, 0xae, 0x07, 0x9f, 0xaf, 0x00, 0x0a,
+ 0xc8, 0x09, 0xde, 0x00, 0x00, 0x0e, 0x0f, 0x00,
+ 0x41, 0x90, 0x9f, 0xde, 0x06, 0x00, 0x44, 0xaf,
+ 0x27, 0x00, 0xb2, 0x06, 0x27, 0x00, 0xb4, 0x06,
+ 0x27, 0x00, 0xb6, 0x06, 0xc0, 0x07, 0x74, 0x00,
+ 0x44, 0xaf, 0x27, 0x00, 0xd6, 0x06, 0x08, 0x00,
+ 0x00, 0x90, 0xc1, 0x07, 0x3a, 0x00, 0x20, 0x00,
+ 0x01, 0xda, 0x7d, 0xc1, 0x9f, 0xaf, 0xba, 0x09,
+ 0xc0, 0x07, 0x44, 0x00, 0x48, 0xaf, 0x27, 0x00,
+ 0x7a, 0x06, 0x9f, 0xaf, 0x96, 0x0a, 0xe7, 0x07,
+ 0x01, 0x00, 0xc0, 0x06, 0xe7, 0x05, 0x0e, 0xc0,
+ 0x97, 0xcf, 0x49, 0xaf, 0xe7, 0x87, 0x43, 0x00,
+ 0x0e, 0xc0, 0xe7, 0x07, 0xff, 0xff, 0xbe, 0x06,
+ 0x9f, 0xaf, 0xae, 0x0a, 0xc0, 0x07, 0x01, 0x00,
+ 0x60, 0xaf, 0x4a, 0xaf, 0x97, 0xcf, 0x00, 0x08,
+ 0x09, 0x08, 0x11, 0x08, 0x00, 0xda, 0x7c, 0xc1,
+ 0x97, 0xcf, 0x67, 0x04, 0xcc, 0x02, 0xc0, 0xdf,
+ 0x51, 0x94, 0xb1, 0xaf, 0x06, 0x00, 0xc1, 0xdf,
+ 0xc9, 0x09, 0xcc, 0x02, 0x49, 0x62, 0x75, 0xc1,
+ 0xc0, 0xdf, 0xa7, 0xcf, 0xd6, 0x02, 0x0e, 0x00,
+ 0x24, 0x00, 0x80, 0x04, 0x22, 0x00, 0x4e, 0x05,
+ 0xd0, 0x00, 0x0e, 0x0a, 0xaa, 0x00, 0x30, 0x08,
+ 0xbe, 0x00, 0x4a, 0x0a, 0x10, 0x00, 0x20, 0x00,
+ 0x04, 0x00, 0x6e, 0x04, 0x02, 0x00, 0x6a, 0x04,
+ 0x06, 0x00, 0x00, 0x00, 0x24, 0xc0, 0x04, 0x04,
+ 0x28, 0xc0, 0xfe, 0xfb, 0x1e, 0xc0, 0x00, 0x04,
+ 0x22, 0xc0, 0xff, 0xf4, 0xc0, 0x00, 0x90, 0x09,
+ 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0x56, 0x08,
+ 0x60, 0x08, 0xd0, 0x08, 0xda, 0x08, 0x00, 0x09,
+ 0x04, 0x09, 0x08, 0x09, 0x32, 0x09, 0x42, 0x09,
+ 0x50, 0x09, 0x52, 0x09, 0x5a, 0x09, 0x5a, 0x09,
+ 0x27, 0x02, 0xca, 0x06, 0x97, 0xcf, 0xe7, 0x07,
+ 0x00, 0x00, 0xca, 0x06, 0x0a, 0x0e, 0x01, 0x00,
+ 0xca, 0x57, 0x0e, 0x00, 0x9f, 0xc3, 0x5a, 0x09,
+ 0xca, 0x37, 0x00, 0x00, 0x9f, 0xc2, 0x5a, 0x09,
+ 0x0a, 0xd2, 0xb2, 0xcf, 0x16, 0x08, 0xc8, 0x09,
+ 0xde, 0x00, 0x07, 0x06, 0x9f, 0xcf, 0x6c, 0x09,
+ 0x17, 0x02, 0xc8, 0x09, 0xde, 0x00, 0x00, 0x0e,
+ 0x0f, 0x00, 0x41, 0x90, 0x9f, 0xde, 0x06, 0x00,
+ 0xc8, 0x05, 0x30, 0x50, 0x06, 0x00, 0x9f, 0xc8,
+ 0x5a, 0x09, 0x27, 0x0c, 0x02, 0x00, 0xb0, 0x06,
+ 0xc0, 0x09, 0xb2, 0x06, 0x27, 0x00, 0xb4, 0x06,
+ 0xe7, 0x07, 0x00, 0x00, 0xae, 0x06, 0x27, 0x00,
+ 0x80, 0x06, 0x00, 0x1c, 0x06, 0x00, 0x27, 0x00,
+ 0xb6, 0x06, 0x41, 0x90, 0x67, 0x50, 0xb0, 0x06,
+ 0x0d, 0xc0, 0x67, 0x00, 0x7e, 0x06, 0x27, 0x0c,
+ 0x06, 0x00, 0x82, 0x06, 0xe7, 0x07, 0xbc, 0x08,
+ 0x84, 0x06, 0xc8, 0x07, 0x7e, 0x06, 0x41, 0x90,
+ 0x51, 0xaf, 0x97, 0xcf, 0x9f, 0xaf, 0x48, 0x0c,
+ 0xe7, 0x09, 0xb6, 0x06, 0xb4, 0x06, 0xe7, 0x09,
+ 0xb0, 0x06, 0xae, 0x06, 0x59, 0xaf, 0x97, 0xcf,
+ 0x27, 0x0c, 0x02, 0x00, 0xac, 0x06, 0x59, 0xaf,
+ 0x97, 0xcf, 0x09, 0x0c, 0x02, 0x00, 0x09, 0xda,
+ 0x49, 0xd2, 0xc9, 0x19, 0xd6, 0x06, 0xc8, 0x07,
+ 0x7e, 0x06, 0xe0, 0x07, 0x00, 0x00, 0x60, 0x02,
+ 0xe0, 0x07, 0x04, 0x00, 0xd0, 0x07, 0xcc, 0x08,
+ 0x48, 0xdb, 0x41, 0x90, 0x50, 0xaf, 0x97, 0xcf,
+ 0x59, 0xaf, 0x97, 0xcf, 0x59, 0xaf, 0x97, 0xcf,
+ 0xf0, 0x57, 0x06, 0x00, 0x06, 0x00, 0x25, 0xc1,
+ 0xe7, 0x07, 0x70, 0x06, 0x80, 0x06, 0x41, 0x90,
+ 0x67, 0x00, 0x7e, 0x06, 0x27, 0x0c, 0x06, 0x00,
+ 0x82, 0x06, 0xe7, 0x07, 0x8c, 0x09, 0x84, 0x06,
+ 0xc8, 0x07, 0x7e, 0x06, 0x41, 0x90, 0x51, 0xaf,
+ 0x97, 0xcf, 0x07, 0x0c, 0x06, 0x00, 0xc7, 0x57,
+ 0x06, 0x00, 0x0f, 0xc1, 0xc8, 0x07, 0x70, 0x06,
+ 0x15, 0xcf, 0x00, 0x0c, 0x02, 0x00, 0x00, 0xda,
+ 0x40, 0xd1, 0x27, 0x00, 0xc2, 0x06, 0x1e, 0xcf,
+ 0x1d, 0xcf, 0x27, 0x0c, 0x02, 0x00, 0xcc, 0x06,
+ 0x19, 0xcf, 0x27, 0x02, 0x20, 0x01, 0xe7, 0x07,
+ 0x08, 0x00, 0x22, 0x01, 0xe7, 0x07, 0x13, 0x00,
+ 0xb0, 0xc0, 0x97, 0xcf, 0x41, 0x90, 0x67, 0x00,
+ 0x7e, 0x06, 0xe7, 0x01, 0x82, 0x06, 0x27, 0x02,
+ 0x80, 0x06, 0xe7, 0x07, 0x8c, 0x09, 0x84, 0x06,
+ 0xc8, 0x07, 0x7e, 0x06, 0xc1, 0x07, 0x00, 0x80,
+ 0x50, 0xaf, 0x97, 0xcf, 0x59, 0xaf, 0x97, 0xcf,
+ 0x00, 0x60, 0x05, 0xc0, 0xe7, 0x07, 0x00, 0x00,
+ 0xc4, 0x06, 0xa7, 0xcf, 0x7c, 0x06, 0x9f, 0xaf,
+ 0x00, 0x0a, 0xe7, 0x07, 0x01, 0x00, 0xc4, 0x06,
+ 0x49, 0xaf, 0xd7, 0x09, 0x00, 0xc0, 0x07, 0xaf,
+ 0xe7, 0x05, 0x00, 0xc0, 0x4a, 0xaf, 0xa7, 0xcf,
+ 0x7c, 0x06, 0xc0, 0x07, 0xfe, 0x7f, 0x44, 0xaf,
+ 0x40, 0x00, 0xc0, 0x37, 0x00, 0x01, 0x41, 0x90,
+ 0xc0, 0x37, 0x08, 0x00, 0xdf, 0xde, 0x50, 0x06,
+ 0xc0, 0x57, 0x10, 0x00, 0x02, 0xc2, 0xc0, 0x07,
+ 0x10, 0x00, 0x27, 0x00, 0x9a, 0x06, 0x41, 0x90,
+ 0x9f, 0xde, 0x40, 0x06, 0x44, 0xaf, 0x27, 0x00,
+ 0x9c, 0x06, 0xc0, 0x09, 0x9a, 0x06, 0x41, 0x90,
+ 0x00, 0xd2, 0x00, 0xd8, 0x9f, 0xde, 0x08, 0x00,
+ 0x44, 0xaf, 0x27, 0x00, 0xc8, 0x06, 0x97, 0xcf,
+ 0xe7, 0x87, 0x00, 0x84, 0x28, 0xc0, 0xe7, 0x67,
+ 0xff, 0xfb, 0x24, 0xc0, 0x97, 0xcf, 0xe7, 0x87,
+ 0x01, 0x00, 0xd2, 0x06, 0xe7, 0x57, 0x00, 0x00,
+ 0xa8, 0x06, 0x97, 0xc1, 0x9f, 0xaf, 0x00, 0x0a,
+ 0xe7, 0x87, 0x00, 0x06, 0x22, 0xc0, 0xe7, 0x07,
+ 0x00, 0x00, 0x90, 0xc0, 0xe7, 0x67, 0xfe, 0xff,
+ 0x3e, 0xc0, 0xe7, 0x07, 0x26, 0x00, 0x0a, 0xc0,
+ 0xe7, 0x87, 0x01, 0x00, 0x3e, 0xc0, 0xe7, 0x07,
+ 0xff, 0xff, 0xbe, 0x06, 0x9f, 0xaf, 0x10, 0x0b,
+ 0x97, 0xcf, 0x17, 0x00, 0xa7, 0xaf, 0x78, 0x06,
+ 0xc0, 0x05, 0x27, 0x00, 0x76, 0x06, 0xe7, 0x87,
+ 0x01, 0x00, 0xd2, 0x06, 0x9f, 0xaf, 0x00, 0x0a,
+ 0xe7, 0x07, 0x0c, 0x00, 0x40, 0xc0, 0x9f, 0xaf,
+ 0x10, 0x0b, 0x00, 0x90, 0x27, 0x00, 0xa6, 0x06,
+ 0x27, 0x00, 0xaa, 0x06, 0xe7, 0x09, 0xb2, 0x06,
+ 0xb4, 0x06, 0x27, 0x00, 0xae, 0x06, 0x27, 0x00,
+ 0xac, 0x06, 0x9f, 0xaf, 0xae, 0x0a, 0xc0, 0x07,
+ 0x00, 0x00, 0x27, 0x00, 0xb2, 0x02, 0x27, 0x00,
+ 0xb4, 0x02, 0x27, 0x00, 0x8e, 0x06, 0xc0, 0x07,
+ 0x06, 0x00, 0xc8, 0x09, 0xde, 0x00, 0xc8, 0x17,
+ 0x03, 0x00, 0xc9, 0x07, 0x70, 0x06, 0x29, 0x0a,
+ 0x00, 0xda, 0x7d, 0xc1, 0x97, 0xcf, 0xd7, 0x09,
+ 0x00, 0xc0, 0xc1, 0xdf, 0x00, 0x90, 0x27, 0x00,
+ 0x96, 0x06, 0xe7, 0x07, 0x96, 0x06, 0x98, 0x06,
+ 0x27, 0x00, 0xa0, 0x06, 0xe7, 0x07, 0xa0, 0x06,
+ 0xa2, 0x06, 0x27, 0x00, 0xa6, 0x06, 0x27, 0x00,
+ 0x90, 0x06, 0x27, 0x00, 0x9e, 0x06, 0xc8, 0x09,
+ 0x9c, 0x06, 0xc1, 0x09, 0x9a, 0x06, 0xc9, 0x07,
+ 0xa4, 0x06, 0x11, 0x02, 0x09, 0x02, 0xc8, 0x17,
+ 0x40, 0x06, 0x01, 0xda, 0x7a, 0xc1, 0x51, 0x94,
+ 0xc8, 0x09, 0xc8, 0x06, 0xc9, 0x07, 0xc6, 0x06,
+ 0xc1, 0x09, 0x9a, 0x06, 0x11, 0x02, 0x09, 0x02,
+ 0xc8, 0x17, 0x08, 0x00, 0x01, 0xda, 0x7a, 0xc1,
+ 0x51, 0x94, 0xe7, 0x05, 0x00, 0xc0, 0x97, 0xcf,
+ 0xe7, 0x57, 0x00, 0x00, 0x76, 0x06, 0x97, 0xc0,
+ 0x9f, 0xaf, 0x04, 0x00, 0xe7, 0x09, 0xbe, 0x06,
+ 0xba, 0x06, 0xe7, 0x57, 0xff, 0xff, 0xba, 0x06,
+ 0x04, 0xc1, 0xe7, 0x07, 0x10, 0x0b, 0xb8, 0x06,
+ 0x97, 0xcf, 0xe7, 0x17, 0x32, 0x00, 0xba, 0x06,
+ 0xe7, 0x67, 0xff, 0x07, 0xba, 0x06, 0xe7, 0x07,
+ 0x46, 0x0b, 0xb8, 0x06, 0x97, 0xcf, 0xe7, 0x57,
+ 0x00, 0x00, 0xc0, 0x06, 0x23, 0xc0, 0xe7, 0x07,
+ 0x04, 0x00, 0x90, 0xc0, 0xe7, 0x07, 0x00, 0x80,
+ 0x80, 0xc0, 0xe7, 0x07, 0x00, 0x00, 0x80, 0xc0,
+ 0xe7, 0x07, 0x00, 0x80, 0x80, 0xc0, 0xc0, 0x07,
+ 0x00, 0x00, 0xc0, 0x07, 0x00, 0x00, 0xc0, 0x07,
+ 0x00, 0x00, 0xe7, 0x07, 0x00, 0x00, 0x80, 0xc0,
+ 0xe7, 0x07, 0x00, 0x80, 0x80, 0xc0, 0xe7, 0x07,
+ 0x00, 0x80, 0x40, 0xc0, 0xc0, 0x07, 0x00, 0x00,
+ 0xe7, 0x07, 0x00, 0x00, 0x40, 0xc0, 0xe7, 0x07,
+ 0x00, 0x00, 0x80, 0xc0, 0xe7, 0x07, 0x04, 0x00,
+ 0x90, 0xc0, 0xe7, 0x07, 0x00, 0x02, 0x40, 0xc0,
+ 0xe7, 0x07, 0x0c, 0x02, 0x40, 0xc0, 0xe7, 0x07,
+ 0x00, 0x00, 0xc0, 0x06, 0xe7, 0x07, 0x00, 0x00,
+ 0xb8, 0x06, 0xe7, 0x07, 0x00, 0x00, 0xd2, 0x06,
+ 0xd7, 0x09, 0x00, 0xc0, 0xc1, 0xdf, 0x9f, 0xaf,
+ 0x34, 0x02, 0xe7, 0x05, 0x00, 0xc0, 0x9f, 0xaf,
+ 0xc4, 0x01, 0x97, 0xcf, 0xd7, 0x09, 0x00, 0xc0,
+ 0x17, 0x00, 0x17, 0x02, 0x97, 0x02, 0xe7, 0x57,
+ 0x00, 0x00, 0xa8, 0x06, 0x06, 0xc0, 0xc0, 0x09,
+ 0x92, 0xc0, 0xc0, 0x77, 0x09, 0x02, 0x9f, 0xc1,
+ 0x5c, 0x05, 0x9f, 0xcf, 0x32, 0x06, 0xd7, 0x09,
+ 0x0e, 0xc0, 0xe7, 0x07, 0x00, 0x00, 0x0e, 0xc0,
+ 0x9f, 0xaf, 0x02, 0x0c, 0xe7, 0x05, 0x0e, 0xc0,
+ 0x97, 0xcf, 0xd7, 0x09, 0x00, 0xc0, 0x17, 0x02,
+ 0xc8, 0x09, 0xb0, 0xc0, 0xe7, 0x67, 0xfe, 0x7f,
+ 0xb0, 0xc0, 0xc8, 0x77, 0x00, 0x20, 0x9f, 0xc1,
+ 0x64, 0xeb, 0xe7, 0x57, 0x00, 0x00, 0xc8, 0x02,
+ 0x9f, 0xc1, 0x80, 0xeb, 0xc8, 0x99, 0xca, 0x02,
+ 0xc8, 0x67, 0x04, 0x00, 0x9f, 0xc1, 0x96, 0xeb,
+ 0x9f, 0xcf, 0x4c, 0xeb, 0xe7, 0x07, 0x00, 0x00,
+ 0xa6, 0xc0, 0xe7, 0x09, 0xb0, 0xc0, 0xc8, 0x02,
+ 0xe7, 0x07, 0x03, 0x00, 0xb0, 0xc0, 0x97, 0xcf,
+ 0xc0, 0x09, 0xb0, 0x06, 0xc0, 0x37, 0x01, 0x00,
+ 0x97, 0xc9, 0xc9, 0x09, 0xb2, 0x06, 0x02, 0x00,
+ 0x41, 0x90, 0x48, 0x02, 0xc9, 0x17, 0x06, 0x00,
+ 0x9f, 0xaf, 0x08, 0x04, 0x9f, 0xa2, 0x72, 0x0c,
+ 0x02, 0xda, 0x77, 0xc1, 0x41, 0x60, 0x71, 0xc1,
+ 0x97, 0xcf, 0x17, 0x02, 0x57, 0x02, 0x43, 0x04,
+ 0x21, 0x04, 0xe0, 0x00, 0x43, 0x04, 0x21, 0x04,
+ 0xe0, 0x00, 0x43, 0x04, 0x21, 0x04, 0xe0, 0x00,
+ 0xc1, 0x07, 0x01, 0x00, 0xc9, 0x05, 0xc8, 0x05,
+ 0x97, 0xcf, 0xe7, 0x07, 0x01, 0x00, 0x8e, 0x06,
+ 0xc8, 0x07, 0x86, 0x06, 0xe7, 0x07, 0x00, 0x00,
+ 0x86, 0x06, 0xe7, 0x07, 0x10, 0x08, 0x88, 0x06,
+ 0xe7, 0x07, 0x04, 0x00, 0x8a, 0x06, 0xe7, 0x07,
+ 0xbc, 0x0c, 0x8c, 0x06, 0xc1, 0x07, 0x03, 0x80,
+ 0x50, 0xaf, 0x97, 0xcf, 0xe7, 0x07, 0x00, 0x00,
+ 0x8e, 0x06, 0x97, 0xcf,
+ 0x00, 0x00
+};
+
+/****************************************************************
+ * kaweth_new_code_fix
+ ****************************************************************/
+static __u8 kaweth_new_code_fix[] =
+{
+ 0xB6, 0xC3, 0xAA, 0xBB, 0xCC, 0xDD,
+ 0x02, 0x00, 0x08, 0x00, 0x28, 0x00, 0x2c, 0x00,
+ 0x34, 0x00, 0x3c, 0x00, 0x40, 0x00, 0x48, 0x00,
+ 0x54, 0x00, 0x58, 0x00, 0x5e, 0x00, 0x64, 0x00,
+ 0x68, 0x00, 0x6e, 0x00, 0x6c, 0x00, 0x72, 0x00,
+ 0x76, 0x00, 0x7c, 0x00, 0x80, 0x00, 0x86, 0x00,
+ 0x8a, 0x00, 0x90, 0x00, 0x94, 0x00, 0x98, 0x00,
+ 0x9e, 0x00, 0xa6, 0x00, 0xaa, 0x00, 0xb0, 0x00,
+ 0xb4, 0x00, 0xb8, 0x00, 0xc0, 0x00, 0xc6, 0x00,
+ 0xca, 0x00, 0xd0, 0x00, 0xd4, 0x00, 0xd8, 0x00,
+ 0xe0, 0x00, 0xde, 0x00, 0xe8, 0x00, 0xf0, 0x00,
+ 0xfc, 0x00, 0x04, 0x01, 0x0a, 0x01, 0x18, 0x01,
+ 0x22, 0x01, 0x28, 0x01, 0x3a, 0x01, 0x3e, 0x01,
+ 0x7e, 0x01, 0x98, 0x01, 0x9c, 0x01, 0xa2, 0x01,
+ 0xac, 0x01, 0xb2, 0x01, 0xba, 0x01, 0xc0, 0x01,
+ 0xc8, 0x01, 0xd0, 0x01, 0xd6, 0x01, 0xf4, 0x01,
+ 0xfc, 0x01, 0x08, 0x02, 0x16, 0x02, 0x1a, 0x02,
+ 0x22, 0x02, 0x2a, 0x02, 0x2e, 0x02, 0x3e, 0x02,
+ 0x44, 0x02, 0x4a, 0x02, 0x50, 0x02, 0x64, 0x02,
+ 0x62, 0x02, 0x6c, 0x02, 0x72, 0x02, 0x86, 0x02,
+ 0x8c, 0x02, 0x90, 0x02, 0x9e, 0x02, 0xbc, 0x02,
+ 0xd0, 0x02, 0xd8, 0x02, 0xdc, 0x02, 0xe0, 0x02,
+ 0xe8, 0x02, 0xe6, 0x02, 0xf4, 0x02, 0xfe, 0x02,
+ 0x04, 0x03, 0x0c, 0x03, 0x28, 0x03, 0x7c, 0x03,
+ 0x90, 0x03, 0x94, 0x03, 0x9c, 0x03, 0xa2, 0x03,
+ 0xc0, 0x03, 0xd0, 0x03, 0xd4, 0x03, 0xee, 0x03,
+ 0xfa, 0x03, 0xfe, 0x03, 0x2e, 0x04, 0x32, 0x04,
+ 0x3c, 0x04, 0x40, 0x04, 0x4e, 0x04, 0x76, 0x04,
+ 0x7c, 0x04, 0x84, 0x04, 0x8a, 0x04, 0x8e, 0x04,
+ 0xa6, 0x04, 0xb0, 0x04, 0xb8, 0x04, 0xbe, 0x04,
+ 0xd2, 0x04, 0xdc, 0x04, 0xee, 0x04, 0x10, 0x05,
+ 0x1a, 0x05, 0x24, 0x05, 0x2a, 0x05, 0x36, 0x05,
+ 0x34, 0x05, 0x3c, 0x05, 0x42, 0x05, 0x64, 0x05,
+ 0x6a, 0x05, 0x6e, 0x05, 0x86, 0x05, 0x22, 0x06,
+ 0x26, 0x06, 0x2c, 0x06, 0x30, 0x06, 0x42, 0x06,
+ 0x4a, 0x06, 0x4e, 0x06, 0x56, 0x06, 0x54, 0x06,
+ 0x5a, 0x06, 0x60, 0x06, 0x66, 0x06, 0xe8, 0x06,
+ 0xee, 0x06, 0xf4, 0x06, 0x16, 0x07, 0x26, 0x07,
+ 0x2c, 0x07, 0x32, 0x07, 0x36, 0x07, 0x3a, 0x07,
+ 0x3e, 0x07, 0x52, 0x07, 0x56, 0x07, 0x5a, 0x07,
+ 0x64, 0x07, 0x76, 0x07, 0x7a, 0x07, 0x80, 0x07,
+ 0x84, 0x07, 0x8a, 0x07, 0x9e, 0x07, 0xa2, 0x07,
+ 0xda, 0x07, 0xde, 0x07, 0xe2, 0x07, 0xe6, 0x07,
+ 0xea, 0x07, 0xee, 0x07, 0xf2, 0x07, 0xf6, 0x07,
+ 0x0e, 0x08, 0x16, 0x08, 0x18, 0x08, 0x1a, 0x08,
+ 0x1c, 0x08, 0x1e, 0x08, 0x20, 0x08, 0x22, 0x08,
+ 0x24, 0x08, 0x26, 0x08, 0x28, 0x08, 0x2a, 0x08,
+ 0x2c, 0x08, 0x2e, 0x08, 0x32, 0x08, 0x3a, 0x08,
+ 0x46, 0x08, 0x4e, 0x08, 0x54, 0x08, 0x5e, 0x08,
+ 0x78, 0x08, 0x7e, 0x08, 0x82, 0x08, 0x86, 0x08,
+ 0x8c, 0x08, 0x90, 0x08, 0x98, 0x08, 0x9e, 0x08,
+ 0xa4, 0x08, 0xaa, 0x08, 0xb0, 0x08, 0xae, 0x08,
+ 0xb4, 0x08, 0xbe, 0x08, 0xc4, 0x08, 0xc2, 0x08,
+ 0xca, 0x08, 0xc8, 0x08, 0xd4, 0x08, 0xe4, 0x08,
+ 0xe8, 0x08, 0xf6, 0x08, 0x14, 0x09, 0x12, 0x09,
+ 0x1a, 0x09, 0x20, 0x09, 0x26, 0x09, 0x24, 0x09,
+ 0x2a, 0x09, 0x3e, 0x09, 0x4c, 0x09, 0x56, 0x09,
+ 0x70, 0x09, 0x74, 0x09, 0x78, 0x09, 0x7e, 0x09,
+ 0x7c, 0x09, 0x82, 0x09, 0x98, 0x09, 0x9c, 0x09,
+ 0xa0, 0x09, 0xa6, 0x09, 0xb8, 0x09, 0xdc, 0x09,
+ 0xe8, 0x09, 0xec, 0x09, 0xfc, 0x09, 0x12, 0x0a,
+ 0x18, 0x0a, 0x1e, 0x0a, 0x42, 0x0a, 0x46, 0x0a,
+ 0x4e, 0x0a, 0x54, 0x0a, 0x5a, 0x0a, 0x5e, 0x0a,
+ 0x68, 0x0a, 0x6e, 0x0a, 0x72, 0x0a, 0x78, 0x0a,
+ 0x76, 0x0a, 0x7c, 0x0a, 0x80, 0x0a, 0x84, 0x0a,
+ 0x94, 0x0a, 0xa4, 0x0a, 0xb8, 0x0a, 0xbe, 0x0a,
+ 0xbc, 0x0a, 0xc2, 0x0a, 0xc8, 0x0a, 0xc6, 0x0a,
+ 0xcc, 0x0a, 0xd0, 0x0a, 0xd4, 0x0a, 0xd8, 0x0a,
+ 0xdc, 0x0a, 0xe0, 0x0a, 0xf2, 0x0a, 0xf6, 0x0a,
+ 0xfa, 0x0a, 0x14, 0x0b, 0x1a, 0x0b, 0x20, 0x0b,
+ 0x1e, 0x0b, 0x26, 0x0b, 0x2e, 0x0b, 0x2c, 0x0b,
+ 0x36, 0x0b, 0x3c, 0x0b, 0x42, 0x0b, 0x40, 0x0b,
+ 0x4a, 0x0b, 0xaa, 0x0b, 0xb0, 0x0b, 0xb6, 0x0b,
+ 0xc0, 0x0b, 0xc8, 0x0b, 0xda, 0x0b, 0xe8, 0x0b,
+ 0xec, 0x0b, 0xfa, 0x0b, 0x4a, 0x0c, 0x54, 0x0c,
+ 0x62, 0x0c, 0x66, 0x0c, 0x96, 0x0c, 0x9a, 0x0c,
+ 0xa0, 0x0c, 0xa6, 0x0c, 0xa4, 0x0c, 0xac, 0x0c,
+ 0xb2, 0x0c, 0xb0, 0x0c, 0xc0, 0x0c,
+ 0x00, 0x00
+};
+
+
+static const int len_kaweth_trigger_code = sizeof(kaweth_trigger_code);
+static const int len_kaweth_trigger_code_fix = sizeof(kaweth_trigger_code_fix);
+static const int len_kaweth_new_code = sizeof(kaweth_new_code);
+static const int len_kaweth_new_code_fix = sizeof(kaweth_new_code_fix);
diff --git a/drivers/net/usb/mcs7830.c b/drivers/net/usb/mcs7830.c
new file mode 100644
index 0000000..6240b97
--- /dev/null
+++ b/drivers/net/usb/mcs7830.c
@@ -0,0 +1,534 @@
+/*
+ * MosChips MCS7830 based USB 2.0 Ethernet Devices
+ *
+ * based on usbnet.c, asix.c and the vendor provided mcs7830 driver
+ *
+ * Copyright (C) 2006 Arnd Bergmann <arnd@arndb.de>
+ * Copyright (C) 2003-2005 David Hollis <dhollis@davehollis.com>
+ * Copyright (C) 2005 Phil Chang <pchang23@sbcglobal.net>
+ * Copyright (c) 2002-2003 TiVo Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/crc32.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/init.h>
+#include <linux/mii.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/usb.h>
+
+#include "usbnet.h"
+
+/* requests */
+#define MCS7830_RD_BMREQ (USB_DIR_IN | USB_TYPE_VENDOR | \
+ USB_RECIP_DEVICE)
+#define MCS7830_WR_BMREQ (USB_DIR_OUT | USB_TYPE_VENDOR | \
+ USB_RECIP_DEVICE)
+#define MCS7830_RD_BREQ 0x0E
+#define MCS7830_WR_BREQ 0x0D
+
+#define MCS7830_CTRL_TIMEOUT 1000
+#define MCS7830_MAX_MCAST 64
+
+#define MCS7830_VENDOR_ID 0x9710
+#define MCS7830_PRODUCT_ID 0x7830
+
+#define MCS7830_MII_ADVERTISE (ADVERTISE_PAUSE_CAP | ADVERTISE_100FULL | \
+ ADVERTISE_100HALF | ADVERTISE_10FULL | \
+ ADVERTISE_10HALF | ADVERTISE_CSMA)
+
+/* HIF_REG_XX coressponding index value */
+enum {
+ HIF_REG_MULTICAST_HASH = 0x00,
+ HIF_REG_PACKET_GAP1 = 0x08,
+ HIF_REG_PACKET_GAP2 = 0x09,
+ HIF_REG_PHY_DATA = 0x0a,
+ HIF_REG_PHY_CMD1 = 0x0c,
+ HIF_REG_PHY_CMD1_READ = 0x40,
+ HIF_REG_PHY_CMD1_WRITE = 0x20,
+ HIF_REG_PHY_CMD1_PHYADDR = 0x01,
+ HIF_REG_PHY_CMD2 = 0x0d,
+ HIF_REG_PHY_CMD2_PEND_FLAG_BIT = 0x80,
+ HIF_REG_PHY_CMD2_READY_FLAG_BIT = 0x40,
+ HIF_REG_CONFIG = 0x0e,
+ HIF_REG_CONFIG_CFG = 0x80,
+ HIF_REG_CONFIG_SPEED100 = 0x40,
+ HIF_REG_CONFIG_FULLDUPLEX_ENABLE = 0x20,
+ HIF_REG_CONFIG_RXENABLE = 0x10,
+ HIF_REG_CONFIG_TXENABLE = 0x08,
+ HIF_REG_CONFIG_SLEEPMODE = 0x04,
+ HIF_REG_CONFIG_ALLMULTICAST = 0x02,
+ HIF_REG_CONFIG_PROMISCIOUS = 0x01,
+ HIF_REG_ETHERNET_ADDR = 0x0f,
+ HIF_REG_22 = 0x15,
+ HIF_REG_PAUSE_THRESHOLD = 0x16,
+ HIF_REG_PAUSE_THRESHOLD_DEFAULT = 0,
+};
+
+struct mcs7830_data {
+ u8 multi_filter[8];
+ u8 config;
+};
+
+static const char driver_name[] = "MOSCHIP usb-ethernet driver";
+
+static int mcs7830_get_reg(struct usbnet *dev, u16 index, u16 size, void *data)
+{
+ struct usb_device *xdev = dev->udev;
+ int ret;
+
+ ret = usb_control_msg(xdev, usb_rcvctrlpipe(xdev, 0), MCS7830_RD_BREQ,
+ MCS7830_RD_BMREQ, 0x0000, index, data,
+ size, msecs_to_jiffies(MCS7830_CTRL_TIMEOUT));
+ return ret;
+}
+
+static int mcs7830_set_reg(struct usbnet *dev, u16 index, u16 size, void *data)
+{
+ struct usb_device *xdev = dev->udev;
+ int ret;
+
+ ret = usb_control_msg(xdev, usb_sndctrlpipe(xdev, 0), MCS7830_WR_BREQ,
+ MCS7830_WR_BMREQ, 0x0000, index, data,
+ size, msecs_to_jiffies(MCS7830_CTRL_TIMEOUT));
+ return ret;
+}
+
+static void mcs7830_async_cmd_callback(struct urb *urb)
+{
+ struct usb_ctrlrequest *req = (struct usb_ctrlrequest *)urb->context;
+
+ if (urb->status < 0)
+ printk(KERN_DEBUG "mcs7830_async_cmd_callback() failed with %d",
+ urb->status);
+
+ kfree(req);
+ usb_free_urb(urb);
+}
+
+static void mcs7830_set_reg_async(struct usbnet *dev, u16 index, u16 size, void *data)
+{
+ struct usb_ctrlrequest *req;
+ int ret;
+ struct urb *urb;
+
+ urb = usb_alloc_urb(0, GFP_ATOMIC);
+ if (!urb) {
+ dev_dbg(&dev->udev->dev, "Error allocating URB "
+ "in write_cmd_async!");
+ return;
+ }
+
+ req = kmalloc(sizeof *req, GFP_ATOMIC);
+ if (!req) {
+ dev_err(&dev->udev->dev, "Failed to allocate memory for "
+ "control request");
+ goto out;
+ }
+ req->bRequestType = MCS7830_WR_BMREQ;
+ req->bRequest = MCS7830_WR_BREQ;
+ req->wValue = 0;
+ req->wIndex = cpu_to_le16(index);
+ req->wLength = cpu_to_le16(size);
+
+ usb_fill_control_urb(urb, dev->udev,
+ usb_sndctrlpipe(dev->udev, 0),
+ (void *)req, data, size,
+ mcs7830_async_cmd_callback, req);
+
+ ret = usb_submit_urb(urb, GFP_ATOMIC);
+ if (ret < 0) {
+ dev_err(&dev->udev->dev, "Error submitting the control "
+ "message: ret=%d", ret);
+ goto out;
+ }
+ return;
+out:
+ kfree(req);
+ usb_free_urb(urb);
+}
+
+static int mcs7830_get_address(struct usbnet *dev)
+{
+ int ret;
+ ret = mcs7830_get_reg(dev, HIF_REG_ETHERNET_ADDR, ETH_ALEN,
+ dev->net->dev_addr);
+ if (ret < 0)
+ return ret;
+ return 0;
+}
+
+static int mcs7830_read_phy(struct usbnet *dev, u8 index)
+{
+ int ret;
+ int i;
+ __le16 val;
+
+ u8 cmd[2] = {
+ HIF_REG_PHY_CMD1_READ | HIF_REG_PHY_CMD1_PHYADDR,
+ HIF_REG_PHY_CMD2_PEND_FLAG_BIT | index,
+ };
+
+ mutex_lock(&dev->phy_mutex);
+ /* write the MII command */
+ ret = mcs7830_set_reg(dev, HIF_REG_PHY_CMD1, 2, cmd);
+ if (ret < 0)
+ goto out;
+
+ /* wait for the data to become valid, should be within < 1ms */
+ for (i = 0; i < 10; i++) {
+ ret = mcs7830_get_reg(dev, HIF_REG_PHY_CMD1, 2, cmd);
+ if ((ret < 0) || (cmd[1] & HIF_REG_PHY_CMD2_READY_FLAG_BIT))
+ break;
+ ret = -EIO;
+ msleep(1);
+ }
+ if (ret < 0)
+ goto out;
+
+ /* read actual register contents */
+ ret = mcs7830_get_reg(dev, HIF_REG_PHY_DATA, 2, &val);
+ if (ret < 0)
+ goto out;
+ ret = le16_to_cpu(val);
+ dev_dbg(&dev->udev->dev, "read PHY reg %02x: %04x (%d tries)\n",
+ index, val, i);
+out:
+ mutex_unlock(&dev->phy_mutex);
+ return ret;
+}
+
+static int mcs7830_write_phy(struct usbnet *dev, u8 index, u16 val)
+{
+ int ret;
+ int i;
+ __le16 le_val;
+
+ u8 cmd[2] = {
+ HIF_REG_PHY_CMD1_WRITE | HIF_REG_PHY_CMD1_PHYADDR,
+ HIF_REG_PHY_CMD2_PEND_FLAG_BIT | (index & 0x1F),
+ };
+
+ mutex_lock(&dev->phy_mutex);
+
+ /* write the new register contents */
+ le_val = cpu_to_le16(val);
+ ret = mcs7830_set_reg(dev, HIF_REG_PHY_DATA, 2, &le_val);
+ if (ret < 0)
+ goto out;
+
+ /* write the MII command */
+ ret = mcs7830_set_reg(dev, HIF_REG_PHY_CMD1, 2, cmd);
+ if (ret < 0)
+ goto out;
+
+ /* wait for the command to be accepted by the PHY */
+ for (i = 0; i < 10; i++) {
+ ret = mcs7830_get_reg(dev, HIF_REG_PHY_CMD1, 2, cmd);
+ if ((ret < 0) || (cmd[1] & HIF_REG_PHY_CMD2_READY_FLAG_BIT))
+ break;
+ ret = -EIO;
+ msleep(1);
+ }
+ if (ret < 0)
+ goto out;
+
+ ret = 0;
+ dev_dbg(&dev->udev->dev, "write PHY reg %02x: %04x (%d tries)\n",
+ index, val, i);
+out:
+ mutex_unlock(&dev->phy_mutex);
+ return ret;
+}
+
+/*
+ * This algorithm comes from the original mcs7830 version 1.4 driver,
+ * not sure if it is needed.
+ */
+static int mcs7830_set_autoneg(struct usbnet *dev, int ptrUserPhyMode)
+{
+ int ret;
+ /* Enable all media types */
+ ret = mcs7830_write_phy(dev, MII_ADVERTISE, MCS7830_MII_ADVERTISE);
+
+ /* First reset BMCR */
+ if (!ret)
+ ret = mcs7830_write_phy(dev, MII_BMCR, 0x0000);
+ /* Enable Auto Neg */
+ if (!ret)
+ ret = mcs7830_write_phy(dev, MII_BMCR, BMCR_ANENABLE);
+ /* Restart Auto Neg (Keep the Enable Auto Neg Bit Set) */
+ if (!ret)
+ ret = mcs7830_write_phy(dev, MII_BMCR,
+ BMCR_ANENABLE | BMCR_ANRESTART );
+ return ret < 0 ? : 0;
+}
+
+
+/*
+ * if we can read register 22, the chip revision is C or higher
+ */
+static int mcs7830_get_rev(struct usbnet *dev)
+{
+ u8 dummy[2];
+ int ret;
+ ret = mcs7830_get_reg(dev, HIF_REG_22, 2, dummy);
+ if (ret > 0)
+ return 2; /* Rev C or later */
+ return 1; /* earlier revision */
+}
+
+/*
+ * On rev. C we need to set the pause threshold
+ */
+static void mcs7830_rev_C_fixup(struct usbnet *dev)
+{
+ u8 pause_threshold = HIF_REG_PAUSE_THRESHOLD_DEFAULT;
+ int retry;
+
+ for (retry = 0; retry < 2; retry++) {
+ if (mcs7830_get_rev(dev) == 2) {
+ dev_info(&dev->udev->dev, "applying rev.C fixup\n");
+ mcs7830_set_reg(dev, HIF_REG_PAUSE_THRESHOLD,
+ 1, &pause_threshold);
+ }
+ msleep(1);
+ }
+}
+
+static int mcs7830_init_dev(struct usbnet *dev)
+{
+ int ret;
+ int retry;
+
+ /* Read MAC address from EEPROM */
+ ret = -EINVAL;
+ for (retry = 0; retry < 5 && ret; retry++)
+ ret = mcs7830_get_address(dev);
+ if (ret) {
+ dev_warn(&dev->udev->dev, "Cannot read MAC address\n");
+ goto out;
+ }
+
+ /* Set up PHY */
+ ret = mcs7830_set_autoneg(dev, 0);
+ if (ret) {
+ dev_info(&dev->udev->dev, "Cannot set autoneg\n");
+ goto out;
+ }
+
+ mcs7830_rev_C_fixup(dev);
+ ret = 0;
+out:
+ return ret;
+}
+
+static int mcs7830_mdio_read(struct net_device *netdev, int phy_id,
+ int location)
+{
+ struct usbnet *dev = netdev->priv;
+ return mcs7830_read_phy(dev, location);
+}
+
+static void mcs7830_mdio_write(struct net_device *netdev, int phy_id,
+ int location, int val)
+{
+ struct usbnet *dev = netdev->priv;
+ mcs7830_write_phy(dev, location, val);
+}
+
+static int mcs7830_ioctl(struct net_device *net, struct ifreq *rq, int cmd)
+{
+ struct usbnet *dev = netdev_priv(net);
+ return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL);
+}
+
+/* credits go to asix_set_multicast */
+static void mcs7830_set_multicast(struct net_device *net)
+{
+ struct usbnet *dev = netdev_priv(net);
+ struct mcs7830_data *data = (struct mcs7830_data *)&dev->data;
+
+ data->config = HIF_REG_CONFIG_TXENABLE;
+
+ /* this should not be needed, but it doesn't work otherwise */
+ data->config |= HIF_REG_CONFIG_ALLMULTICAST;
+
+ if (net->flags & IFF_PROMISC) {
+ data->config |= HIF_REG_CONFIG_PROMISCIOUS;
+ } else if (net->flags & IFF_ALLMULTI
+ || net->mc_count > MCS7830_MAX_MCAST) {
+ data->config |= HIF_REG_CONFIG_ALLMULTICAST;
+ } else if (net->mc_count == 0) {
+ /* just broadcast and directed */
+ } else {
+ /* We use the 20 byte dev->data
+ * for our 8 byte filter buffer
+ * to avoid allocating memory that
+ * is tricky to free later */
+ struct dev_mc_list *mc_list = net->mc_list;
+ u32 crc_bits;
+ int i;
+
+ memset(data->multi_filter, 0, sizeof data->multi_filter);
+
+ /* Build the multicast hash filter. */
+ for (i = 0; i < net->mc_count; i++) {
+ crc_bits = ether_crc(ETH_ALEN, mc_list->dmi_addr) >> 26;
+ data->multi_filter[crc_bits >> 3] |= 1 << (crc_bits & 7);
+ mc_list = mc_list->next;
+ }
+
+ mcs7830_set_reg_async(dev, HIF_REG_MULTICAST_HASH,
+ sizeof data->multi_filter,
+ data->multi_filter);
+ }
+
+ mcs7830_set_reg_async(dev, HIF_REG_CONFIG, 1, &data->config);
+}
+
+static int mcs7830_get_regs_len(struct net_device *net)
+{
+ struct usbnet *dev = netdev_priv(net);
+
+ switch (mcs7830_get_rev(dev)) {
+ case 1:
+ return 21;
+ case 2:
+ return 32;
+ }
+ return 0;
+}
+
+static void mcs7830_get_drvinfo(struct net_device *net, struct ethtool_drvinfo *drvinfo)
+{
+ usbnet_get_drvinfo(net, drvinfo);
+ drvinfo->regdump_len = mcs7830_get_regs_len(net);
+}
+
+static void mcs7830_get_regs(struct net_device *net, struct ethtool_regs *regs, void *data)
+{
+ struct usbnet *dev = netdev_priv(net);
+
+ regs->version = mcs7830_get_rev(dev);
+ mcs7830_get_reg(dev, 0, regs->len, data);
+}
+
+static struct ethtool_ops mcs7830_ethtool_ops = {
+ .get_drvinfo = mcs7830_get_drvinfo,
+ .get_regs_len = mcs7830_get_regs_len,
+ .get_regs = mcs7830_get_regs,
+
+ /* common usbnet calls */
+ .get_link = usbnet_get_link,
+ .get_msglevel = usbnet_get_msglevel,
+ .set_msglevel = usbnet_set_msglevel,
+ .get_settings = usbnet_get_settings,
+ .set_settings = usbnet_set_settings,
+ .nway_reset = usbnet_nway_reset,
+};
+
+static int mcs7830_bind(struct usbnet *dev, struct usb_interface *udev)
+{
+ struct net_device *net = dev->net;
+ int ret;
+
+ ret = mcs7830_init_dev(dev);
+ if (ret)
+ goto out;
+
+ net->do_ioctl = mcs7830_ioctl;
+ net->ethtool_ops = &mcs7830_ethtool_ops;
+ net->set_multicast_list = mcs7830_set_multicast;
+ mcs7830_set_multicast(net);
+
+ /* reserve space for the status byte on rx */
+ dev->rx_urb_size = ETH_FRAME_LEN + 1;
+
+ dev->mii.mdio_read = mcs7830_mdio_read;
+ dev->mii.mdio_write = mcs7830_mdio_write;
+ dev->mii.dev = net;
+ dev->mii.phy_id_mask = 0x3f;
+ dev->mii.reg_num_mask = 0x1f;
+ dev->mii.phy_id = *((u8 *) net->dev_addr + 1);
+
+ ret = usbnet_get_endpoints(dev, udev);
+out:
+ return ret;
+}
+
+/* The chip always appends a status bytes that we need to strip */
+static int mcs7830_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
+{
+ u8 status;
+
+ if (skb->len == 0) {
+ dev_err(&dev->udev->dev, "unexpected empty rx frame\n");
+ return 0;
+ }
+
+ skb_trim(skb, skb->len - 1);
+ status = skb->data[skb->len];
+
+ if (status != 0x20)
+ dev_dbg(&dev->udev->dev, "rx fixup status %x\n", status);
+
+ return skb->len > 0;
+}
+
+static const struct driver_info moschip_info = {
+ .description = "MOSCHIP 7830 usb-NET adapter",
+ .bind = mcs7830_bind,
+ .rx_fixup = mcs7830_rx_fixup,
+ .flags = FLAG_ETHER,
+ .in = 1,
+ .out = 2,
+};
+
+static const struct usb_device_id products[] = {
+ {
+ USB_DEVICE(MCS7830_VENDOR_ID, MCS7830_PRODUCT_ID),
+ .driver_info = (unsigned long) &moschip_info,
+ },
+ {},
+};
+MODULE_DEVICE_TABLE(usb, products);
+
+static struct usb_driver mcs7830_driver = {
+ .name = driver_name,
+ .id_table = products,
+ .probe = usbnet_probe,
+ .disconnect = usbnet_disconnect,
+ .suspend = usbnet_suspend,
+ .resume = usbnet_resume,
+};
+
+static int __init mcs7830_init(void)
+{
+ return usb_register(&mcs7830_driver);
+}
+module_init(mcs7830_init);
+
+static void __exit mcs7830_exit(void)
+{
+ usb_deregister(&mcs7830_driver);
+}
+module_exit(mcs7830_exit);
+
+MODULE_DESCRIPTION("USB to network adapter MCS7830)");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/usb/net1080.c b/drivers/net/usb/net1080.c
new file mode 100644
index 0000000..19bf8da
--- /dev/null
+++ b/drivers/net/usb/net1080.c
@@ -0,0 +1,615 @@
+/*
+ * Net1080 based USB host-to-host cables
+ * Copyright (C) 2000-2005 by David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+// #define DEBUG // error path messages, extra info
+// #define VERBOSE // more; success messages
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/workqueue.h>
+#include <linux/mii.h>
+#include <linux/usb.h>
+
+#include <asm/unaligned.h>
+
+#include "usbnet.h"
+
+
+/*
+ * Netchip 1080 driver ... http://www.netchip.com
+ * (Sept 2004: End-of-life announcement has been sent.)
+ * Used in (some) LapLink cables
+ */
+
+#define frame_errors data[1]
+
+/*
+ * NetChip framing of ethernet packets, supporting additional error
+ * checks for links that may drop bulk packets from inside messages.
+ * Odd USB length == always short read for last usb packet.
+ * - nc_header
+ * - Ethernet header (14 bytes)
+ * - payload
+ * - (optional padding byte, if needed so length becomes odd)
+ * - nc_trailer
+ *
+ * This framing is to be avoided for non-NetChip devices.
+ */
+
+struct nc_header { // packed:
+ __le16 hdr_len; // sizeof nc_header (LE, all)
+ __le16 packet_len; // payload size (including ethhdr)
+ __le16 packet_id; // detects dropped packets
+#define MIN_HEADER 6
+
+ // all else is optional, and must start with:
+ // __le16 vendorId; // from usb-if
+ // __le16 productId;
+} __attribute__((__packed__));
+
+#define PAD_BYTE ((unsigned char)0xAC)
+
+struct nc_trailer {
+ __le16 packet_id;
+} __attribute__((__packed__));
+
+// packets may use FLAG_FRAMING_NC and optional pad
+#define FRAMED_SIZE(mtu) (sizeof (struct nc_header) \
+ + sizeof (struct ethhdr) \
+ + (mtu) \
+ + 1 \
+ + sizeof (struct nc_trailer))
+
+#define MIN_FRAMED FRAMED_SIZE(0)
+
+/* packets _could_ be up to 64KB... */
+#define NC_MAX_PACKET 32767
+
+
+/*
+ * Zero means no timeout; else, how long a 64 byte bulk packet may be queued
+ * before the hardware drops it. If that's done, the driver will need to
+ * frame network packets to guard against the dropped USB packets. The win32
+ * driver sets this for both sides of the link.
+ */
+#define NC_READ_TTL_MS ((u8)255) // ms
+
+/*
+ * We ignore most registers and EEPROM contents.
+ */
+#define REG_USBCTL ((u8)0x04)
+#define REG_TTL ((u8)0x10)
+#define REG_STATUS ((u8)0x11)
+
+/*
+ * Vendor specific requests to read/write data
+ */
+#define REQUEST_REGISTER ((u8)0x10)
+#define REQUEST_EEPROM ((u8)0x11)
+
+static int
+nc_vendor_read(struct usbnet *dev, u8 req, u8 regnum, u16 *retval_ptr)
+{
+ int status = usb_control_msg(dev->udev,
+ usb_rcvctrlpipe(dev->udev, 0),
+ req,
+ USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ 0, regnum,
+ retval_ptr, sizeof *retval_ptr,
+ USB_CTRL_GET_TIMEOUT);
+ if (status > 0)
+ status = 0;
+ if (!status)
+ le16_to_cpus(retval_ptr);
+ return status;
+}
+
+static inline int
+nc_register_read(struct usbnet *dev, u8 regnum, u16 *retval_ptr)
+{
+ return nc_vendor_read(dev, REQUEST_REGISTER, regnum, retval_ptr);
+}
+
+// no retval ... can become async, usable in_interrupt()
+static void
+nc_vendor_write(struct usbnet *dev, u8 req, u8 regnum, u16 value)
+{
+ usb_control_msg(dev->udev,
+ usb_sndctrlpipe(dev->udev, 0),
+ req,
+ USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ value, regnum,
+ NULL, 0, // data is in setup packet
+ USB_CTRL_SET_TIMEOUT);
+}
+
+static inline void
+nc_register_write(struct usbnet *dev, u8 regnum, u16 value)
+{
+ nc_vendor_write(dev, REQUEST_REGISTER, regnum, value);
+}
+
+
+#if 0
+static void nc_dump_registers(struct usbnet *dev)
+{
+ u8 reg;
+ u16 *vp = kmalloc(sizeof (u16));
+
+ if (!vp) {
+ dbg("no memory?");
+ return;
+ }
+
+ dbg("%s registers:", dev->net->name);
+ for (reg = 0; reg < 0x20; reg++) {
+ int retval;
+
+ // reading some registers is trouble
+ if (reg >= 0x08 && reg <= 0xf)
+ continue;
+ if (reg >= 0x12 && reg <= 0x1e)
+ continue;
+
+ retval = nc_register_read(dev, reg, vp);
+ if (retval < 0)
+ dbg("%s reg [0x%x] ==> error %d",
+ dev->net->name, reg, retval);
+ else
+ dbg("%s reg [0x%x] = 0x%x",
+ dev->net->name, reg, *vp);
+ }
+ kfree(vp);
+}
+#endif
+
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * Control register
+ */
+
+#define USBCTL_WRITABLE_MASK 0x1f0f
+// bits 15-13 reserved, r/o
+#define USBCTL_ENABLE_LANG (1 << 12)
+#define USBCTL_ENABLE_MFGR (1 << 11)
+#define USBCTL_ENABLE_PROD (1 << 10)
+#define USBCTL_ENABLE_SERIAL (1 << 9)
+#define USBCTL_ENABLE_DEFAULTS (1 << 8)
+// bits 7-4 reserved, r/o
+#define USBCTL_FLUSH_OTHER (1 << 3)
+#define USBCTL_FLUSH_THIS (1 << 2)
+#define USBCTL_DISCONN_OTHER (1 << 1)
+#define USBCTL_DISCONN_THIS (1 << 0)
+
+static inline void nc_dump_usbctl(struct usbnet *dev, u16 usbctl)
+{
+ if (!netif_msg_link(dev))
+ return;
+ devdbg(dev, "net1080 %s-%s usbctl 0x%x:%s%s%s%s%s;"
+ " this%s%s;"
+ " other%s%s; r/o 0x%x",
+ dev->udev->bus->bus_name, dev->udev->devpath,
+ usbctl,
+ (usbctl & USBCTL_ENABLE_LANG) ? " lang" : "",
+ (usbctl & USBCTL_ENABLE_MFGR) ? " mfgr" : "",
+ (usbctl & USBCTL_ENABLE_PROD) ? " prod" : "",
+ (usbctl & USBCTL_ENABLE_SERIAL) ? " serial" : "",
+ (usbctl & USBCTL_ENABLE_DEFAULTS) ? " defaults" : "",
+
+ (usbctl & USBCTL_FLUSH_OTHER) ? " FLUSH" : "",
+ (usbctl & USBCTL_DISCONN_OTHER) ? " DIS" : "",
+ (usbctl & USBCTL_FLUSH_THIS) ? " FLUSH" : "",
+ (usbctl & USBCTL_DISCONN_THIS) ? " DIS" : "",
+ usbctl & ~USBCTL_WRITABLE_MASK
+ );
+}
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * Status register
+ */
+
+#define STATUS_PORT_A (1 << 15)
+
+#define STATUS_CONN_OTHER (1 << 14)
+#define STATUS_SUSPEND_OTHER (1 << 13)
+#define STATUS_MAILBOX_OTHER (1 << 12)
+#define STATUS_PACKETS_OTHER(n) (((n) >> 8) & 0x03)
+
+#define STATUS_CONN_THIS (1 << 6)
+#define STATUS_SUSPEND_THIS (1 << 5)
+#define STATUS_MAILBOX_THIS (1 << 4)
+#define STATUS_PACKETS_THIS(n) (((n) >> 0) & 0x03)
+
+#define STATUS_UNSPEC_MASK 0x0c8c
+#define STATUS_NOISE_MASK ((u16)~(0x0303|STATUS_UNSPEC_MASK))
+
+
+static inline void nc_dump_status(struct usbnet *dev, u16 status)
+{
+ if (!netif_msg_link(dev))
+ return;
+ devdbg(dev, "net1080 %s-%s status 0x%x:"
+ " this (%c) PKT=%d%s%s%s;"
+ " other PKT=%d%s%s%s; unspec 0x%x",
+ dev->udev->bus->bus_name, dev->udev->devpath,
+ status,
+
+ // XXX the packet counts don't seem right
+ // (1 at reset, not 0); maybe UNSPEC too
+
+ (status & STATUS_PORT_A) ? 'A' : 'B',
+ STATUS_PACKETS_THIS(status),
+ (status & STATUS_CONN_THIS) ? " CON" : "",
+ (status & STATUS_SUSPEND_THIS) ? " SUS" : "",
+ (status & STATUS_MAILBOX_THIS) ? " MBOX" : "",
+
+ STATUS_PACKETS_OTHER(status),
+ (status & STATUS_CONN_OTHER) ? " CON" : "",
+ (status & STATUS_SUSPEND_OTHER) ? " SUS" : "",
+ (status & STATUS_MAILBOX_OTHER) ? " MBOX" : "",
+
+ status & STATUS_UNSPEC_MASK
+ );
+}
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * TTL register
+ */
+
+#define TTL_THIS(ttl) (0x00ff & ttl)
+#define TTL_OTHER(ttl) (0x00ff & (ttl >> 8))
+#define MK_TTL(this,other) ((u16)(((other)<<8)|(0x00ff&(this))))
+
+static inline void nc_dump_ttl(struct usbnet *dev, u16 ttl)
+{
+ if (netif_msg_link(dev))
+ devdbg(dev, "net1080 %s-%s ttl 0x%x this = %d, other = %d",
+ dev->udev->bus->bus_name, dev->udev->devpath,
+ ttl, TTL_THIS(ttl), TTL_OTHER(ttl));
+}
+
+/*-------------------------------------------------------------------------*/
+
+static int net1080_reset(struct usbnet *dev)
+{
+ u16 usbctl, status, ttl;
+ u16 *vp = kmalloc(sizeof (u16), GFP_KERNEL);
+ int retval;
+
+ if (!vp)
+ return -ENOMEM;
+
+ // nc_dump_registers(dev);
+
+ if ((retval = nc_register_read(dev, REG_STATUS, vp)) < 0) {
+ dbg("can't read %s-%s status: %d",
+ dev->udev->bus->bus_name, dev->udev->devpath, retval);
+ goto done;
+ }
+ status = *vp;
+ nc_dump_status(dev, status);
+
+ if ((retval = nc_register_read(dev, REG_USBCTL, vp)) < 0) {
+ dbg("can't read USBCTL, %d", retval);
+ goto done;
+ }
+ usbctl = *vp;
+ nc_dump_usbctl(dev, usbctl);
+
+ nc_register_write(dev, REG_USBCTL,
+ USBCTL_FLUSH_THIS | USBCTL_FLUSH_OTHER);
+
+ if ((retval = nc_register_read(dev, REG_TTL, vp)) < 0) {
+ dbg("can't read TTL, %d", retval);
+ goto done;
+ }
+ ttl = *vp;
+ // nc_dump_ttl(dev, ttl);
+
+ nc_register_write(dev, REG_TTL,
+ MK_TTL(NC_READ_TTL_MS, TTL_OTHER(ttl)) );
+ dbg("%s: assigned TTL, %d ms", dev->net->name, NC_READ_TTL_MS);
+
+ if (netif_msg_link(dev))
+ devinfo(dev, "port %c, peer %sconnected",
+ (status & STATUS_PORT_A) ? 'A' : 'B',
+ (status & STATUS_CONN_OTHER) ? "" : "dis"
+ );
+ retval = 0;
+
+done:
+ kfree(vp);
+ return retval;
+}
+
+static int net1080_check_connect(struct usbnet *dev)
+{
+ int retval;
+ u16 status;
+ u16 *vp = kmalloc(sizeof (u16), GFP_KERNEL);
+
+ if (!vp)
+ return -ENOMEM;
+ retval = nc_register_read(dev, REG_STATUS, vp);
+ status = *vp;
+ kfree(vp);
+ if (retval != 0) {
+ dbg("%s net1080_check_conn read - %d", dev->net->name, retval);
+ return retval;
+ }
+ if ((status & STATUS_CONN_OTHER) != STATUS_CONN_OTHER)
+ return -ENOLINK;
+ return 0;
+}
+
+static void nc_flush_complete(struct urb *urb)
+{
+ kfree(urb->context);
+ usb_free_urb(urb);
+}
+
+static void nc_ensure_sync(struct usbnet *dev)
+{
+ dev->frame_errors++;
+ if (dev->frame_errors > 5) {
+ struct urb *urb;
+ struct usb_ctrlrequest *req;
+ int status;
+
+ /* Send a flush */
+ urb = usb_alloc_urb(0, GFP_ATOMIC);
+ if (!urb)
+ return;
+
+ req = kmalloc(sizeof *req, GFP_ATOMIC);
+ if (!req) {
+ usb_free_urb(urb);
+ return;
+ }
+
+ req->bRequestType = USB_DIR_OUT
+ | USB_TYPE_VENDOR
+ | USB_RECIP_DEVICE;
+ req->bRequest = REQUEST_REGISTER;
+ req->wValue = cpu_to_le16(USBCTL_FLUSH_THIS
+ | USBCTL_FLUSH_OTHER);
+ req->wIndex = cpu_to_le16(REG_USBCTL);
+ req->wLength = cpu_to_le16(0);
+
+ /* queue an async control request, we don't need
+ * to do anything when it finishes except clean up.
+ */
+ usb_fill_control_urb(urb, dev->udev,
+ usb_sndctrlpipe(dev->udev, 0),
+ (unsigned char *) req,
+ NULL, 0,
+ nc_flush_complete, req);
+ status = usb_submit_urb(urb, GFP_ATOMIC);
+ if (status) {
+ kfree(req);
+ usb_free_urb(urb);
+ return;
+ }
+
+ if (netif_msg_rx_err(dev))
+ devdbg(dev, "flush net1080; too many framing errors");
+ dev->frame_errors = 0;
+ }
+}
+
+static int net1080_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
+{
+ struct nc_header *header;
+ struct nc_trailer *trailer;
+ u16 hdr_len, packet_len;
+
+ if (!(skb->len & 0x01)) {
+#ifdef DEBUG
+ struct net_device *net = dev->net;
+ dbg("rx framesize %d range %d..%d mtu %d", skb->len,
+ net->hard_header_len, dev->hard_mtu, net->mtu);
+#endif
+ dev->stats.rx_frame_errors++;
+ nc_ensure_sync(dev);
+ return 0;
+ }
+
+ header = (struct nc_header *) skb->data;
+ hdr_len = le16_to_cpup(&header->hdr_len);
+ packet_len = le16_to_cpup(&header->packet_len);
+ if (FRAMED_SIZE(packet_len) > NC_MAX_PACKET) {
+ dev->stats.rx_frame_errors++;
+ dbg("packet too big, %d", packet_len);
+ nc_ensure_sync(dev);
+ return 0;
+ } else if (hdr_len < MIN_HEADER) {
+ dev->stats.rx_frame_errors++;
+ dbg("header too short, %d", hdr_len);
+ nc_ensure_sync(dev);
+ return 0;
+ } else if (hdr_len > MIN_HEADER) {
+ // out of band data for us?
+ dbg("header OOB, %d bytes", hdr_len - MIN_HEADER);
+ nc_ensure_sync(dev);
+ // switch (vendor/product ids) { ... }
+ }
+ skb_pull(skb, hdr_len);
+
+ trailer = (struct nc_trailer *)
+ (skb->data + skb->len - sizeof *trailer);
+ skb_trim(skb, skb->len - sizeof *trailer);
+
+ if ((packet_len & 0x01) == 0) {
+ if (skb->data [packet_len] != PAD_BYTE) {
+ dev->stats.rx_frame_errors++;
+ dbg("bad pad");
+ return 0;
+ }
+ skb_trim(skb, skb->len - 1);
+ }
+ if (skb->len != packet_len) {
+ dev->stats.rx_frame_errors++;
+ dbg("bad packet len %d (expected %d)",
+ skb->len, packet_len);
+ nc_ensure_sync(dev);
+ return 0;
+ }
+ if (header->packet_id != get_unaligned(&trailer->packet_id)) {
+ dev->stats.rx_fifo_errors++;
+ dbg("(2+ dropped) rx packet_id mismatch 0x%x 0x%x",
+ le16_to_cpu(header->packet_id),
+ le16_to_cpu(trailer->packet_id));
+ return 0;
+ }
+#if 0
+ devdbg(dev, "frame <rx h %d p %d id %d", header->hdr_len,
+ header->packet_len, header->packet_id);
+#endif
+ dev->frame_errors = 0;
+ return 1;
+}
+
+static struct sk_buff *
+net1080_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags)
+{
+ struct sk_buff *skb2;
+ struct nc_header *header = NULL;
+ struct nc_trailer *trailer = NULL;
+ int padlen = sizeof (struct nc_trailer);
+ int len = skb->len;
+
+ if (!((len + padlen + sizeof (struct nc_header)) & 0x01))
+ padlen++;
+ if (!skb_cloned(skb)) {
+ int headroom = skb_headroom(skb);
+ int tailroom = skb_tailroom(skb);
+
+ if (padlen <= tailroom &&
+ sizeof(struct nc_header) <= headroom)
+ /* There's enough head and tail room */
+ goto encapsulate;
+
+ if ((sizeof (struct nc_header) + padlen) <
+ (headroom + tailroom)) {
+ /* There's enough total room, so just readjust */
+ skb->data = memmove(skb->head
+ + sizeof (struct nc_header),
+ skb->data, skb->len);
+ skb_set_tail_pointer(skb, len);
+ goto encapsulate;
+ }
+ }
+
+ /* Create a new skb to use with the correct size */
+ skb2 = skb_copy_expand(skb,
+ sizeof (struct nc_header),
+ padlen,
+ flags);
+ dev_kfree_skb_any(skb);
+ if (!skb2)
+ return skb2;
+ skb = skb2;
+
+encapsulate:
+ /* header first */
+ header = (struct nc_header *) skb_push(skb, sizeof *header);
+ header->hdr_len = cpu_to_le16(sizeof (*header));
+ header->packet_len = cpu_to_le16(len);
+ header->packet_id = cpu_to_le16((u16)dev->xid++);
+
+ /* maybe pad; then trailer */
+ if (!((skb->len + sizeof *trailer) & 0x01))
+ *skb_put(skb, 1) = PAD_BYTE;
+ trailer = (struct nc_trailer *) skb_put(skb, sizeof *trailer);
+ put_unaligned(header->packet_id, &trailer->packet_id);
+#if 0
+ devdbg(dev, "frame >tx h %d p %d id %d",
+ header->hdr_len, header->packet_len,
+ header->packet_id);
+#endif
+ return skb;
+}
+
+static int net1080_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+ unsigned extra = sizeof (struct nc_header)
+ + 1
+ + sizeof (struct nc_trailer);
+
+ dev->net->hard_header_len += extra;
+ dev->rx_urb_size = dev->net->hard_header_len + dev->net->mtu;
+ dev->hard_mtu = NC_MAX_PACKET;
+ return usbnet_get_endpoints (dev, intf);
+}
+
+static const struct driver_info net1080_info = {
+ .description = "NetChip TurboCONNECT",
+ .flags = FLAG_FRAMING_NC,
+ .bind = net1080_bind,
+ .reset = net1080_reset,
+ .check_connect = net1080_check_connect,
+ .rx_fixup = net1080_rx_fixup,
+ .tx_fixup = net1080_tx_fixup,
+};
+
+static const struct usb_device_id products [] = {
+{
+ USB_DEVICE(0x0525, 0x1080), // NetChip ref design
+ .driver_info = (unsigned long) &net1080_info,
+}, {
+ USB_DEVICE(0x06D0, 0x0622), // Laplink Gold
+ .driver_info = (unsigned long) &net1080_info,
+},
+ { }, // END
+};
+MODULE_DEVICE_TABLE(usb, products);
+
+static struct usb_driver net1080_driver = {
+ .name = "net1080",
+ .id_table = products,
+ .probe = usbnet_probe,
+ .disconnect = usbnet_disconnect,
+ .suspend = usbnet_suspend,
+ .resume = usbnet_resume,
+};
+
+static int __init net1080_init(void)
+{
+ return usb_register(&net1080_driver);
+}
+module_init(net1080_init);
+
+static void __exit net1080_exit(void)
+{
+ usb_deregister(&net1080_driver);
+}
+module_exit(net1080_exit);
+
+MODULE_AUTHOR("David Brownell");
+MODULE_DESCRIPTION("NetChip 1080 based USB Host-to-Host Links");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/usb/pegasus.c b/drivers/net/usb/pegasus.c
new file mode 100644
index 0000000..a05fd97
--- /dev/null
+++ b/drivers/net/usb/pegasus.c
@@ -0,0 +1,1504 @@
+/*
+ * Copyright (c) 1999-2005 Petko Manolov (petkan@users.sourceforge.net)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * ChangeLog:
+ * .... Most of the time spent on reading sources & docs.
+ * v0.2.x First official release for the Linux kernel.
+ * v0.3.0 Beutified and structured, some bugs fixed.
+ * v0.3.x URBifying bulk requests and bugfixing. First relatively
+ * stable release. Still can touch device's registers only
+ * from top-halves.
+ * v0.4.0 Control messages remained unurbified are now URBs.
+ * Now we can touch the HW at any time.
+ * v0.4.9 Control urbs again use process context to wait. Argh...
+ * Some long standing bugs (enable_net_traffic) fixed.
+ * Also nasty trick about resubmiting control urb from
+ * interrupt context used. Please let me know how it
+ * behaves. Pegasus II support added since this version.
+ * TODO: suppressing HCD warnings spewage on disconnect.
+ * v0.4.13 Ethernet address is now set at probe(), not at open()
+ * time as this seems to break dhcpd.
+ * v0.5.0 branch to 2.5.x kernels
+ * v0.5.1 ethtool support added
+ * v0.5.5 rx socket buffers are in a pool and the their allocation
+ * is out of the interrupt routine.
+ */
+
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/mii.h>
+#include <linux/usb.h>
+#include <linux/module.h>
+#include <asm/byteorder.h>
+#include <asm/uaccess.h>
+#include "pegasus.h"
+
+/*
+ * Version Information
+ */
+#define DRIVER_VERSION "v0.6.14 (2006/09/27)"
+#define DRIVER_AUTHOR "Petko Manolov <petkan@users.sourceforge.net>"
+#define DRIVER_DESC "Pegasus/Pegasus II USB Ethernet driver"
+
+static const char driver_name[] = "pegasus";
+
+#undef PEGASUS_WRITE_EEPROM
+#define BMSR_MEDIA (BMSR_10HALF | BMSR_10FULL | BMSR_100HALF | \
+ BMSR_100FULL | BMSR_ANEGCAPABLE)
+
+static int loopback = 0;
+static int mii_mode = 0;
+static char *devid=NULL;
+
+static struct usb_eth_dev usb_dev_id[] = {
+#define PEGASUS_DEV(pn, vid, pid, flags) \
+ {.name = pn, .vendor = vid, .device = pid, .private = flags},
+#include "pegasus.h"
+#undef PEGASUS_DEV
+ {NULL, 0, 0, 0},
+ {NULL, 0, 0, 0}
+};
+
+static struct usb_device_id pegasus_ids[] = {
+#define PEGASUS_DEV(pn, vid, pid, flags) \
+ {.match_flags = USB_DEVICE_ID_MATCH_DEVICE, .idVendor = vid, .idProduct = pid},
+#include "pegasus.h"
+#undef PEGASUS_DEV
+ {},
+ {}
+};
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+module_param(loopback, bool, 0);
+module_param(mii_mode, bool, 0);
+module_param(devid, charp, 0);
+MODULE_PARM_DESC(loopback, "Enable MAC loopback mode (bit 0)");
+MODULE_PARM_DESC(mii_mode, "Enable HomePNA mode (bit 0),default=MII mode = 0");
+MODULE_PARM_DESC(devid, "The format is: 'DEV_name:VendorID:DeviceID:Flags'");
+
+/* use ethtool to change the level for any given device */
+static int msg_level = -1;
+module_param (msg_level, int, 0);
+MODULE_PARM_DESC (msg_level, "Override default message level");
+
+MODULE_DEVICE_TABLE(usb, pegasus_ids);
+
+static int update_eth_regs_async(pegasus_t *);
+/* Aargh!!! I _really_ hate such tweaks */
+static void ctrl_callback(struct urb *urb)
+{
+ pegasus_t *pegasus = urb->context;
+
+ if (!pegasus)
+ return;
+
+ switch (urb->status) {
+ case 0:
+ if (pegasus->flags & ETH_REGS_CHANGE) {
+ pegasus->flags &= ~ETH_REGS_CHANGE;
+ pegasus->flags |= ETH_REGS_CHANGED;
+ update_eth_regs_async(pegasus);
+ return;
+ }
+ break;
+ case -EINPROGRESS:
+ return;
+ case -ENOENT:
+ break;
+ default:
+ if (netif_msg_drv(pegasus))
+ dev_dbg(&pegasus->intf->dev, "%s, status %d\n",
+ __FUNCTION__, urb->status);
+ }
+ pegasus->flags &= ~ETH_REGS_CHANGED;
+ wake_up(&pegasus->ctrl_wait);
+}
+
+static int get_registers(pegasus_t * pegasus, __u16 indx, __u16 size,
+ void *data)
+{
+ int ret;
+ char *buffer;
+ DECLARE_WAITQUEUE(wait, current);
+
+ buffer = kmalloc(size, GFP_KERNEL);
+ if (!buffer) {
+ if (netif_msg_drv(pegasus))
+ dev_warn(&pegasus->intf->dev, "out of memory in %s\n",
+ __FUNCTION__);
+ return -ENOMEM;
+ }
+ add_wait_queue(&pegasus->ctrl_wait, &wait);
+ set_current_state(TASK_UNINTERRUPTIBLE);
+ while (pegasus->flags & ETH_REGS_CHANGED)
+ schedule();
+ remove_wait_queue(&pegasus->ctrl_wait, &wait);
+ set_current_state(TASK_RUNNING);
+
+ pegasus->dr.bRequestType = PEGASUS_REQT_READ;
+ pegasus->dr.bRequest = PEGASUS_REQ_GET_REGS;
+ pegasus->dr.wValue = cpu_to_le16(0);
+ pegasus->dr.wIndex = cpu_to_le16p(&indx);
+ pegasus->dr.wLength = cpu_to_le16p(&size);
+ pegasus->ctrl_urb->transfer_buffer_length = size;
+
+ usb_fill_control_urb(pegasus->ctrl_urb, pegasus->usb,
+ usb_rcvctrlpipe(pegasus->usb, 0),
+ (char *) &pegasus->dr,
+ buffer, size, ctrl_callback, pegasus);
+
+ add_wait_queue(&pegasus->ctrl_wait, &wait);
+ set_current_state(TASK_UNINTERRUPTIBLE);
+
+ /* using ATOMIC, we'd never wake up if we slept */
+ if ((ret = usb_submit_urb(pegasus->ctrl_urb, GFP_ATOMIC))) {
+ set_current_state(TASK_RUNNING);
+ if (ret == -ENODEV)
+ netif_device_detach(pegasus->net);
+ if (netif_msg_drv(pegasus))
+ dev_err(&pegasus->intf->dev, "%s, status %d\n",
+ __FUNCTION__, ret);
+ goto out;
+ }
+
+ schedule();
+out:
+ remove_wait_queue(&pegasus->ctrl_wait, &wait);
+ memcpy(data, buffer, size);
+ kfree(buffer);
+
+ return ret;
+}
+
+static int set_registers(pegasus_t * pegasus, __u16 indx, __u16 size,
+ void *data)
+{
+ int ret;
+ char *buffer;
+ DECLARE_WAITQUEUE(wait, current);
+
+ buffer = kmalloc(size, GFP_KERNEL);
+ if (!buffer) {
+ if (netif_msg_drv(pegasus))
+ dev_warn(&pegasus->intf->dev, "out of memory in %s\n",
+ __FUNCTION__);
+ return -ENOMEM;
+ }
+ memcpy(buffer, data, size);
+
+ add_wait_queue(&pegasus->ctrl_wait, &wait);
+ set_current_state(TASK_UNINTERRUPTIBLE);
+ while (pegasus->flags & ETH_REGS_CHANGED)
+ schedule();
+ remove_wait_queue(&pegasus->ctrl_wait, &wait);
+ set_current_state(TASK_RUNNING);
+
+ pegasus->dr.bRequestType = PEGASUS_REQT_WRITE;
+ pegasus->dr.bRequest = PEGASUS_REQ_SET_REGS;
+ pegasus->dr.wValue = cpu_to_le16(0);
+ pegasus->dr.wIndex = cpu_to_le16p(&indx);
+ pegasus->dr.wLength = cpu_to_le16p(&size);
+ pegasus->ctrl_urb->transfer_buffer_length = size;
+
+ usb_fill_control_urb(pegasus->ctrl_urb, pegasus->usb,
+ usb_sndctrlpipe(pegasus->usb, 0),
+ (char *) &pegasus->dr,
+ buffer, size, ctrl_callback, pegasus);
+
+ add_wait_queue(&pegasus->ctrl_wait, &wait);
+ set_current_state(TASK_UNINTERRUPTIBLE);
+
+ if ((ret = usb_submit_urb(pegasus->ctrl_urb, GFP_ATOMIC))) {
+ if (ret == -ENODEV)
+ netif_device_detach(pegasus->net);
+ if (netif_msg_drv(pegasus))
+ dev_err(&pegasus->intf->dev, "%s, status %d\n",
+ __FUNCTION__, ret);
+ goto out;
+ }
+
+ schedule();
+out:
+ remove_wait_queue(&pegasus->ctrl_wait, &wait);
+ kfree(buffer);
+
+ return ret;
+}
+
+static int set_register(pegasus_t * pegasus, __u16 indx, __u8 data)
+{
+ int ret;
+ char *tmp;
+ DECLARE_WAITQUEUE(wait, current);
+
+ tmp = kmalloc(1, GFP_KERNEL);
+ if (!tmp) {
+ if (netif_msg_drv(pegasus))
+ dev_warn(&pegasus->intf->dev, "out of memory in %s\n",
+ __FUNCTION__);
+ return -ENOMEM;
+ }
+ memcpy(tmp, &data, 1);
+ add_wait_queue(&pegasus->ctrl_wait, &wait);
+ set_current_state(TASK_UNINTERRUPTIBLE);
+ while (pegasus->flags & ETH_REGS_CHANGED)
+ schedule();
+ remove_wait_queue(&pegasus->ctrl_wait, &wait);
+ set_current_state(TASK_RUNNING);
+
+ pegasus->dr.bRequestType = PEGASUS_REQT_WRITE;
+ pegasus->dr.bRequest = PEGASUS_REQ_SET_REG;
+ pegasus->dr.wValue = cpu_to_le16(data);
+ pegasus->dr.wIndex = cpu_to_le16p(&indx);
+ pegasus->dr.wLength = cpu_to_le16(1);
+ pegasus->ctrl_urb->transfer_buffer_length = 1;
+
+ usb_fill_control_urb(pegasus->ctrl_urb, pegasus->usb,
+ usb_sndctrlpipe(pegasus->usb, 0),
+ (char *) &pegasus->dr,
+ tmp, 1, ctrl_callback, pegasus);
+
+ add_wait_queue(&pegasus->ctrl_wait, &wait);
+ set_current_state(TASK_UNINTERRUPTIBLE);
+
+ if ((ret = usb_submit_urb(pegasus->ctrl_urb, GFP_ATOMIC))) {
+ if (ret == -ENODEV)
+ netif_device_detach(pegasus->net);
+ if (netif_msg_drv(pegasus))
+ dev_err(&pegasus->intf->dev, "%s, status %d\n",
+ __FUNCTION__, ret);
+ goto out;
+ }
+
+ schedule();
+out:
+ remove_wait_queue(&pegasus->ctrl_wait, &wait);
+ kfree(tmp);
+
+ return ret;
+}
+
+static int update_eth_regs_async(pegasus_t * pegasus)
+{
+ int ret;
+
+ pegasus->dr.bRequestType = PEGASUS_REQT_WRITE;
+ pegasus->dr.bRequest = PEGASUS_REQ_SET_REGS;
+ pegasus->dr.wValue = 0;
+ pegasus->dr.wIndex = cpu_to_le16(EthCtrl0);
+ pegasus->dr.wLength = cpu_to_le16(3);
+ pegasus->ctrl_urb->transfer_buffer_length = 3;
+
+ usb_fill_control_urb(pegasus->ctrl_urb, pegasus->usb,
+ usb_sndctrlpipe(pegasus->usb, 0),
+ (char *) &pegasus->dr,
+ pegasus->eth_regs, 3, ctrl_callback, pegasus);
+
+ if ((ret = usb_submit_urb(pegasus->ctrl_urb, GFP_ATOMIC))) {
+ if (ret == -ENODEV)
+ netif_device_detach(pegasus->net);
+ if (netif_msg_drv(pegasus))
+ dev_err(&pegasus->intf->dev, "%s, status %d\n",
+ __FUNCTION__, ret);
+ }
+
+ return ret;
+}
+
+/* Returns 0 on success, error on failure */
+static int read_mii_word(pegasus_t * pegasus, __u8 phy, __u8 indx, __u16 * regd)
+{
+ int i;
+ __u8 data[4] = { phy, 0, 0, indx };
+ __le16 regdi;
+ int ret;
+
+ set_register(pegasus, PhyCtrl, 0);
+ set_registers(pegasus, PhyAddr, sizeof (data), data);
+ set_register(pegasus, PhyCtrl, (indx | PHY_READ));
+ for (i = 0; i < REG_TIMEOUT; i++) {
+ ret = get_registers(pegasus, PhyCtrl, 1, data);
+ if (ret == -ESHUTDOWN)
+ goto fail;
+ if (data[0] & PHY_DONE)
+ break;
+ }
+ if (i < REG_TIMEOUT) {
+ ret = get_registers(pegasus, PhyData, 2, ®di);
+ *regd = le16_to_cpu(regdi);
+ return ret;
+ }
+fail:
+ if (netif_msg_drv(pegasus))
+ dev_warn(&pegasus->intf->dev, "%s failed\n", __FUNCTION__);
+
+ return ret;
+}
+
+static int mdio_read(struct net_device *dev, int phy_id, int loc)
+{
+ pegasus_t *pegasus = (pegasus_t *) netdev_priv(dev);
+ u16 res;
+
+ read_mii_word(pegasus, phy_id, loc, &res);
+ return (int)res;
+}
+
+static int write_mii_word(pegasus_t * pegasus, __u8 phy, __u8 indx, __u16 regd)
+{
+ int i;
+ __u8 data[4] = { phy, 0, 0, indx };
+ int ret;
+
+ data[1] = (u8) regd;
+ data[2] = (u8) (regd >> 8);
+ set_register(pegasus, PhyCtrl, 0);
+ set_registers(pegasus, PhyAddr, sizeof(data), data);
+ set_register(pegasus, PhyCtrl, (indx | PHY_WRITE));
+ for (i = 0; i < REG_TIMEOUT; i++) {
+ ret = get_registers(pegasus, PhyCtrl, 1, data);
+ if (ret == -ESHUTDOWN)
+ goto fail;
+ if (data[0] & PHY_DONE)
+ break;
+ }
+ if (i < REG_TIMEOUT)
+ return ret;
+
+fail:
+ if (netif_msg_drv(pegasus))
+ dev_warn(&pegasus->intf->dev, "%s failed\n", __FUNCTION__);
+ return -ETIMEDOUT;
+}
+
+static void mdio_write(struct net_device *dev, int phy_id, int loc, int val)
+{
+ pegasus_t *pegasus = (pegasus_t *) netdev_priv(dev);
+
+ write_mii_word(pegasus, phy_id, loc, val);
+}
+
+static int read_eprom_word(pegasus_t * pegasus, __u8 index, __u16 * retdata)
+{
+ int i;
+ __u8 tmp;
+ __le16 retdatai;
+ int ret;
+
+ set_register(pegasus, EpromCtrl, 0);
+ set_register(pegasus, EpromOffset, index);
+ set_register(pegasus, EpromCtrl, EPROM_READ);
+
+ for (i = 0; i < REG_TIMEOUT; i++) {
+ ret = get_registers(pegasus, EpromCtrl, 1, &tmp);
+ if (tmp & EPROM_DONE)
+ break;
+ if (ret == -ESHUTDOWN)
+ goto fail;
+ }
+ if (i < REG_TIMEOUT) {
+ ret = get_registers(pegasus, EpromData, 2, &retdatai);
+ *retdata = le16_to_cpu(retdatai);
+ return ret;
+ }
+
+fail:
+ if (netif_msg_drv(pegasus))
+ dev_warn(&pegasus->intf->dev, "%s failed\n", __FUNCTION__);
+ return -ETIMEDOUT;
+}
+
+#ifdef PEGASUS_WRITE_EEPROM
+static inline void enable_eprom_write(pegasus_t * pegasus)
+{
+ __u8 tmp;
+ int ret;
+
+ get_registers(pegasus, EthCtrl2, 1, &tmp);
+ set_register(pegasus, EthCtrl2, tmp | EPROM_WR_ENABLE);
+}
+
+static inline void disable_eprom_write(pegasus_t * pegasus)
+{
+ __u8 tmp;
+ int ret;
+
+ get_registers(pegasus, EthCtrl2, 1, &tmp);
+ set_register(pegasus, EpromCtrl, 0);
+ set_register(pegasus, EthCtrl2, tmp & ~EPROM_WR_ENABLE);
+}
+
+static int write_eprom_word(pegasus_t * pegasus, __u8 index, __u16 data)
+{
+ int i;
+ __u8 tmp, d[4] = { 0x3f, 0, 0, EPROM_WRITE };
+ int ret;
+
+ set_registers(pegasus, EpromOffset, 4, d);
+ enable_eprom_write(pegasus);
+ set_register(pegasus, EpromOffset, index);
+ set_registers(pegasus, EpromData, 2, &data);
+ set_register(pegasus, EpromCtrl, EPROM_WRITE);
+
+ for (i = 0; i < REG_TIMEOUT; i++) {
+ ret = get_registers(pegasus, EpromCtrl, 1, &tmp);
+ if (ret == -ESHUTDOWN)
+ goto fail;
+ if (tmp & EPROM_DONE)
+ break;
+ }
+ disable_eprom_write(pegasus);
+ if (i < REG_TIMEOUT)
+ return ret;
+fail:
+ if (netif_msg_drv(pegasus))
+ dev_warn(&pegasus->intf->dev, "%s failed\n", __FUNCTION__);
+ return -ETIMEDOUT;
+}
+#endif /* PEGASUS_WRITE_EEPROM */
+
+static inline void get_node_id(pegasus_t * pegasus, __u8 * id)
+{
+ int i;
+ __u16 w16;
+
+ for (i = 0; i < 3; i++) {
+ read_eprom_word(pegasus, i, &w16);
+ ((__le16 *) id)[i] = cpu_to_le16p(&w16);
+ }
+}
+
+static void set_ethernet_addr(pegasus_t * pegasus)
+{
+ __u8 node_id[6];
+
+ if (pegasus->features & PEGASUS_II) {
+ get_registers(pegasus, 0x10, sizeof(node_id), node_id);
+ } else {
+ get_node_id(pegasus, node_id);
+ set_registers(pegasus, EthID, sizeof (node_id), node_id);
+ }
+ memcpy(pegasus->net->dev_addr, node_id, sizeof (node_id));
+}
+
+static inline int reset_mac(pegasus_t * pegasus)
+{
+ __u8 data = 0x8;
+ int i;
+
+ set_register(pegasus, EthCtrl1, data);
+ for (i = 0; i < REG_TIMEOUT; i++) {
+ get_registers(pegasus, EthCtrl1, 1, &data);
+ if (~data & 0x08) {
+ if (loopback & 1)
+ break;
+ if (mii_mode && (pegasus->features & HAS_HOME_PNA))
+ set_register(pegasus, Gpio1, 0x34);
+ else
+ set_register(pegasus, Gpio1, 0x26);
+ set_register(pegasus, Gpio0, pegasus->features);
+ set_register(pegasus, Gpio0, DEFAULT_GPIO_SET);
+ break;
+ }
+ }
+ if (i == REG_TIMEOUT)
+ return -ETIMEDOUT;
+
+ if (usb_dev_id[pegasus->dev_index].vendor == VENDOR_LINKSYS ||
+ usb_dev_id[pegasus->dev_index].vendor == VENDOR_DLINK) {
+ set_register(pegasus, Gpio0, 0x24);
+ set_register(pegasus, Gpio0, 0x26);
+ }
+ if (usb_dev_id[pegasus->dev_index].vendor == VENDOR_ELCON) {
+ __u16 auxmode;
+ read_mii_word(pegasus, 3, 0x1b, &auxmode);
+ write_mii_word(pegasus, 3, 0x1b, auxmode | 4);
+ }
+
+ return 0;
+}
+
+static int enable_net_traffic(struct net_device *dev, struct usb_device *usb)
+{
+ __u16 linkpart;
+ __u8 data[4];
+ pegasus_t *pegasus = netdev_priv(dev);
+ int ret;
+
+ read_mii_word(pegasus, pegasus->phy, MII_LPA, &linkpart);
+ data[0] = 0xc9;
+ data[1] = 0;
+ if (linkpart & (ADVERTISE_100FULL | ADVERTISE_10FULL))
+ data[1] |= 0x20; /* set full duplex */
+ if (linkpart & (ADVERTISE_100FULL | ADVERTISE_100HALF))
+ data[1] |= 0x10; /* set 100 Mbps */
+ if (mii_mode)
+ data[1] = 0;
+ data[2] = (loopback & 1) ? 0x09 : 0x01;
+
+ memcpy(pegasus->eth_regs, data, sizeof (data));
+ ret = set_registers(pegasus, EthCtrl0, 3, data);
+
+ if (usb_dev_id[pegasus->dev_index].vendor == VENDOR_LINKSYS ||
+ usb_dev_id[pegasus->dev_index].vendor == VENDOR_LINKSYS2 ||
+ usb_dev_id[pegasus->dev_index].vendor == VENDOR_DLINK) {
+ u16 auxmode;
+ read_mii_word(pegasus, 0, 0x1b, &auxmode);
+ write_mii_word(pegasus, 0, 0x1b, auxmode | 4);
+ }
+
+ return ret;
+}
+
+static void fill_skb_pool(pegasus_t * pegasus)
+{
+ int i;
+
+ for (i = 0; i < RX_SKBS; i++) {
+ if (pegasus->rx_pool[i])
+ continue;
+ pegasus->rx_pool[i] = dev_alloc_skb(PEGASUS_MTU + 2);
+ /*
+ ** we give up if the allocation fail. the tasklet will be
+ ** rescheduled again anyway...
+ */
+ if (pegasus->rx_pool[i] == NULL)
+ return;
+ skb_reserve(pegasus->rx_pool[i], 2);
+ }
+}
+
+static void free_skb_pool(pegasus_t * pegasus)
+{
+ int i;
+
+ for (i = 0; i < RX_SKBS; i++) {
+ if (pegasus->rx_pool[i]) {
+ dev_kfree_skb(pegasus->rx_pool[i]);
+ pegasus->rx_pool[i] = NULL;
+ }
+ }
+}
+
+static inline struct sk_buff *pull_skb(pegasus_t * pegasus)
+{
+ int i;
+ struct sk_buff *skb;
+
+ for (i = 0; i < RX_SKBS; i++) {
+ if (likely(pegasus->rx_pool[i] != NULL)) {
+ skb = pegasus->rx_pool[i];
+ pegasus->rx_pool[i] = NULL;
+ return skb;
+ }
+ }
+ return NULL;
+}
+
+static void read_bulk_callback(struct urb *urb)
+{
+ pegasus_t *pegasus = urb->context;
+ struct net_device *net;
+ int rx_status, count = urb->actual_length;
+ u8 *buf = urb->transfer_buffer;
+ __u16 pkt_len;
+
+ if (!pegasus)
+ return;
+
+ net = pegasus->net;
+ if (!netif_device_present(net) || !netif_running(net))
+ return;
+
+ switch (urb->status) {
+ case 0:
+ break;
+ case -ETIME:
+ if (netif_msg_rx_err(pegasus))
+ pr_debug("%s: reset MAC\n", net->name);
+ pegasus->flags &= ~PEGASUS_RX_BUSY;
+ break;
+ case -EPIPE: /* stall, or disconnect from TT */
+ /* FIXME schedule work to clear the halt */
+ if (netif_msg_rx_err(pegasus))
+ printk(KERN_WARNING "%s: no rx stall recovery\n",
+ net->name);
+ return;
+ case -ENOENT:
+ case -ECONNRESET:
+ case -ESHUTDOWN:
+ if (netif_msg_ifdown(pegasus))
+ pr_debug("%s: rx unlink, %d\n", net->name, urb->status);
+ return;
+ default:
+ if (netif_msg_rx_err(pegasus))
+ pr_debug("%s: RX status %d\n", net->name, urb->status);
+ goto goon;
+ }
+
+ if (!count || count < 4)
+ goto goon;
+
+ rx_status = buf[count - 2];
+ if (rx_status & 0x1e) {
+ if (netif_msg_rx_err(pegasus))
+ pr_debug("%s: RX packet error %x\n",
+ net->name, rx_status);
+ pegasus->stats.rx_errors++;
+ if (rx_status & 0x06) // long or runt
+ pegasus->stats.rx_length_errors++;
+ if (rx_status & 0x08)
+ pegasus->stats.rx_crc_errors++;
+ if (rx_status & 0x10) // extra bits
+ pegasus->stats.rx_frame_errors++;
+ goto goon;
+ }
+ if (pegasus->chip == 0x8513) {
+ pkt_len = le32_to_cpu(*(__le32 *)urb->transfer_buffer);
+ pkt_len &= 0x0fff;
+ pegasus->rx_skb->data += 2;
+ } else {
+ pkt_len = buf[count - 3] << 8;
+ pkt_len += buf[count - 4];
+ pkt_len &= 0xfff;
+ pkt_len -= 8;
+ }
+
+ /*
+ * If the packet is unreasonably long, quietly drop it rather than
+ * kernel panicing by calling skb_put.
+ */
+ if (pkt_len > PEGASUS_MTU)
+ goto goon;
+
+ /*
+ * at this point we are sure pegasus->rx_skb != NULL
+ * so we go ahead and pass up the packet.
+ */
+ skb_put(pegasus->rx_skb, pkt_len);
+ pegasus->rx_skb->protocol = eth_type_trans(pegasus->rx_skb, net);
+ netif_rx(pegasus->rx_skb);
+ pegasus->stats.rx_packets++;
+ pegasus->stats.rx_bytes += pkt_len;
+
+ if (pegasus->flags & PEGASUS_UNPLUG)
+ return;
+
+ spin_lock(&pegasus->rx_pool_lock);
+ pegasus->rx_skb = pull_skb(pegasus);
+ spin_unlock(&pegasus->rx_pool_lock);
+
+ if (pegasus->rx_skb == NULL)
+ goto tl_sched;
+goon:
+ usb_fill_bulk_urb(pegasus->rx_urb, pegasus->usb,
+ usb_rcvbulkpipe(pegasus->usb, 1),
+ pegasus->rx_skb->data, PEGASUS_MTU + 8,
+ read_bulk_callback, pegasus);
+ rx_status = usb_submit_urb(pegasus->rx_urb, GFP_ATOMIC);
+ if (rx_status == -ENODEV)
+ netif_device_detach(pegasus->net);
+ else if (rx_status) {
+ pegasus->flags |= PEGASUS_RX_URB_FAIL;
+ goto tl_sched;
+ } else {
+ pegasus->flags &= ~PEGASUS_RX_URB_FAIL;
+ }
+
+ return;
+
+tl_sched:
+ tasklet_schedule(&pegasus->rx_tl);
+}
+
+static void rx_fixup(unsigned long data)
+{
+ pegasus_t *pegasus;
+ unsigned long flags;
+ int status;
+
+ pegasus = (pegasus_t *) data;
+ if (pegasus->flags & PEGASUS_UNPLUG)
+ return;
+
+ spin_lock_irqsave(&pegasus->rx_pool_lock, flags);
+ fill_skb_pool(pegasus);
+ if (pegasus->flags & PEGASUS_RX_URB_FAIL)
+ if (pegasus->rx_skb)
+ goto try_again;
+ if (pegasus->rx_skb == NULL) {
+ pegasus->rx_skb = pull_skb(pegasus);
+ }
+ if (pegasus->rx_skb == NULL) {
+ if (netif_msg_rx_err(pegasus))
+ printk(KERN_WARNING "%s: low on memory\n",
+ pegasus->net->name);
+ tasklet_schedule(&pegasus->rx_tl);
+ goto done;
+ }
+ usb_fill_bulk_urb(pegasus->rx_urb, pegasus->usb,
+ usb_rcvbulkpipe(pegasus->usb, 1),
+ pegasus->rx_skb->data, PEGASUS_MTU + 8,
+ read_bulk_callback, pegasus);
+try_again:
+ status = usb_submit_urb(pegasus->rx_urb, GFP_ATOMIC);
+ if (status == -ENODEV)
+ netif_device_detach(pegasus->net);
+ else if (status) {
+ pegasus->flags |= PEGASUS_RX_URB_FAIL;
+ tasklet_schedule(&pegasus->rx_tl);
+ } else {
+ pegasus->flags &= ~PEGASUS_RX_URB_FAIL;
+ }
+done:
+ spin_unlock_irqrestore(&pegasus->rx_pool_lock, flags);
+}
+
+static void write_bulk_callback(struct urb *urb)
+{
+ pegasus_t *pegasus = urb->context;
+ struct net_device *net = pegasus->net;
+
+ if (!pegasus)
+ return;
+
+ if (!netif_device_present(net) || !netif_running(net))
+ return;
+
+ switch (urb->status) {
+ case -EPIPE:
+ /* FIXME schedule_work() to clear the tx halt */
+ netif_stop_queue(net);
+ if (netif_msg_tx_err(pegasus))
+ printk(KERN_WARNING "%s: no tx stall recovery\n",
+ net->name);
+ return;
+ case -ENOENT:
+ case -ECONNRESET:
+ case -ESHUTDOWN:
+ if (netif_msg_ifdown(pegasus))
+ pr_debug("%s: tx unlink, %d\n", net->name, urb->status);
+ return;
+ default:
+ if (netif_msg_tx_err(pegasus))
+ pr_info("%s: TX status %d\n", net->name, urb->status);
+ /* FALL THROUGH */
+ case 0:
+ break;
+ }
+
+ net->trans_start = jiffies;
+ netif_wake_queue(net);
+}
+
+static void intr_callback(struct urb *urb)
+{
+ pegasus_t *pegasus = urb->context;
+ struct net_device *net;
+ int status;
+
+ if (!pegasus)
+ return;
+ net = pegasus->net;
+
+ switch (urb->status) {
+ case 0:
+ break;
+ case -ECONNRESET: /* unlink */
+ case -ENOENT:
+ case -ESHUTDOWN:
+ return;
+ default:
+ /* some Pegasus-I products report LOTS of data
+ * toggle errors... avoid log spamming
+ */
+ if (netif_msg_timer(pegasus))
+ pr_debug("%s: intr status %d\n", net->name,
+ urb->status);
+ }
+
+ if (urb->actual_length >= 6) {
+ u8 * d = urb->transfer_buffer;
+
+ /* byte 0 == tx_status1, reg 2B */
+ if (d[0] & (TX_UNDERRUN|EXCESSIVE_COL
+ |LATE_COL|JABBER_TIMEOUT)) {
+ pegasus->stats.tx_errors++;
+ if (d[0] & TX_UNDERRUN)
+ pegasus->stats.tx_fifo_errors++;
+ if (d[0] & (EXCESSIVE_COL | JABBER_TIMEOUT))
+ pegasus->stats.tx_aborted_errors++;
+ if (d[0] & LATE_COL)
+ pegasus->stats.tx_window_errors++;
+ }
+
+ /* d[5].LINK_STATUS lies on some adapters.
+ * d[0].NO_CARRIER kicks in only with failed TX.
+ * ... so monitoring with MII may be safest.
+ */
+
+ /* bytes 3-4 == rx_lostpkt, reg 2E/2F */
+ pegasus->stats.rx_missed_errors += ((d[3] & 0x7f) << 8) | d[4];
+ }
+
+ status = usb_submit_urb(urb, GFP_ATOMIC);
+ if (status == -ENODEV)
+ netif_device_detach(pegasus->net);
+ if (status && netif_msg_timer(pegasus))
+ printk(KERN_ERR "%s: can't resubmit interrupt urb, %d\n",
+ net->name, status);
+}
+
+static void pegasus_tx_timeout(struct net_device *net)
+{
+ pegasus_t *pegasus = netdev_priv(net);
+ if (netif_msg_timer(pegasus))
+ printk(KERN_WARNING "%s: tx timeout\n", net->name);
+ usb_unlink_urb(pegasus->tx_urb);
+ pegasus->stats.tx_errors++;
+}
+
+static int pegasus_start_xmit(struct sk_buff *skb, struct net_device *net)
+{
+ pegasus_t *pegasus = netdev_priv(net);
+ int count = ((skb->len + 2) & 0x3f) ? skb->len + 2 : skb->len + 3;
+ int res;
+ __u16 l16 = skb->len;
+
+ netif_stop_queue(net);
+
+ ((__le16 *) pegasus->tx_buff)[0] = cpu_to_le16(l16);
+ skb_copy_from_linear_data(skb, pegasus->tx_buff + 2, skb->len);
+ usb_fill_bulk_urb(pegasus->tx_urb, pegasus->usb,
+ usb_sndbulkpipe(pegasus->usb, 2),
+ pegasus->tx_buff, count,
+ write_bulk_callback, pegasus);
+ if ((res = usb_submit_urb(pegasus->tx_urb, GFP_ATOMIC))) {
+ if (netif_msg_tx_err(pegasus))
+ printk(KERN_WARNING "%s: fail tx, %d\n",
+ net->name, res);
+ switch (res) {
+ case -EPIPE: /* stall, or disconnect from TT */
+ /* cleanup should already have been scheduled */
+ break;
+ case -ENODEV: /* disconnect() upcoming */
+ netif_device_detach(pegasus->net);
+ break;
+ default:
+ pegasus->stats.tx_errors++;
+ netif_start_queue(net);
+ }
+ } else {
+ pegasus->stats.tx_packets++;
+ pegasus->stats.tx_bytes += skb->len;
+ net->trans_start = jiffies;
+ }
+ dev_kfree_skb(skb);
+
+ return 0;
+}
+
+static struct net_device_stats *pegasus_netdev_stats(struct net_device *dev)
+{
+ return &((pegasus_t *) netdev_priv(dev))->stats;
+}
+
+static inline void disable_net_traffic(pegasus_t * pegasus)
+{
+ int tmp = 0;
+
+ set_registers(pegasus, EthCtrl0, 2, &tmp);
+}
+
+static inline void get_interrupt_interval(pegasus_t * pegasus)
+{
+ __u8 data[2];
+
+ read_eprom_word(pegasus, 4, (__u16 *) data);
+ if (pegasus->usb->speed != USB_SPEED_HIGH) {
+ if (data[1] < 0x80) {
+ if (netif_msg_timer(pegasus))
+ dev_info(&pegasus->intf->dev, "intr interval "
+ "changed from %ums to %ums\n",
+ data[1], 0x80);
+ data[1] = 0x80;
+#ifdef PEGASUS_WRITE_EEPROM
+ write_eprom_word(pegasus, 4, *(__u16 *) data);
+#endif
+ }
+ }
+ pegasus->intr_interval = data[1];
+}
+
+static void set_carrier(struct net_device *net)
+{
+ pegasus_t *pegasus = netdev_priv(net);
+ u16 tmp;
+
+ if (read_mii_word(pegasus, pegasus->phy, MII_BMSR, &tmp))
+ return;
+
+ if (tmp & BMSR_LSTATUS)
+ netif_carrier_on(net);
+ else
+ netif_carrier_off(net);
+}
+
+static void free_all_urbs(pegasus_t * pegasus)
+{
+ usb_free_urb(pegasus->intr_urb);
+ usb_free_urb(pegasus->tx_urb);
+ usb_free_urb(pegasus->rx_urb);
+ usb_free_urb(pegasus->ctrl_urb);
+}
+
+static void unlink_all_urbs(pegasus_t * pegasus)
+{
+ usb_kill_urb(pegasus->intr_urb);
+ usb_kill_urb(pegasus->tx_urb);
+ usb_kill_urb(pegasus->rx_urb);
+ usb_kill_urb(pegasus->ctrl_urb);
+}
+
+static int alloc_urbs(pegasus_t * pegasus)
+{
+ pegasus->ctrl_urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!pegasus->ctrl_urb) {
+ return 0;
+ }
+ pegasus->rx_urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!pegasus->rx_urb) {
+ usb_free_urb(pegasus->ctrl_urb);
+ return 0;
+ }
+ pegasus->tx_urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!pegasus->tx_urb) {
+ usb_free_urb(pegasus->rx_urb);
+ usb_free_urb(pegasus->ctrl_urb);
+ return 0;
+ }
+ pegasus->intr_urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!pegasus->intr_urb) {
+ usb_free_urb(pegasus->tx_urb);
+ usb_free_urb(pegasus->rx_urb);
+ usb_free_urb(pegasus->ctrl_urb);
+ return 0;
+ }
+
+ return 1;
+}
+
+static int pegasus_open(struct net_device *net)
+{
+ pegasus_t *pegasus = netdev_priv(net);
+ int res;
+
+ if (pegasus->rx_skb == NULL)
+ pegasus->rx_skb = pull_skb(pegasus);
+ /*
+ ** Note: no point to free the pool. it is empty :-)
+ */
+ if (!pegasus->rx_skb)
+ return -ENOMEM;
+
+ res = set_registers(pegasus, EthID, 6, net->dev_addr);
+
+ usb_fill_bulk_urb(pegasus->rx_urb, pegasus->usb,
+ usb_rcvbulkpipe(pegasus->usb, 1),
+ pegasus->rx_skb->data, PEGASUS_MTU + 8,
+ read_bulk_callback, pegasus);
+ if ((res = usb_submit_urb(pegasus->rx_urb, GFP_KERNEL))) {
+ if (res == -ENODEV)
+ netif_device_detach(pegasus->net);
+ if (netif_msg_ifup(pegasus))
+ pr_debug("%s: failed rx_urb, %d", net->name, res);
+ goto exit;
+ }
+
+ usb_fill_int_urb(pegasus->intr_urb, pegasus->usb,
+ usb_rcvintpipe(pegasus->usb, 3),
+ pegasus->intr_buff, sizeof (pegasus->intr_buff),
+ intr_callback, pegasus, pegasus->intr_interval);
+ if ((res = usb_submit_urb(pegasus->intr_urb, GFP_KERNEL))) {
+ if (res == -ENODEV)
+ netif_device_detach(pegasus->net);
+ if (netif_msg_ifup(pegasus))
+ pr_debug("%s: failed intr_urb, %d\n", net->name, res);
+ usb_kill_urb(pegasus->rx_urb);
+ goto exit;
+ }
+ if ((res = enable_net_traffic(net, pegasus->usb))) {
+ if (netif_msg_ifup(pegasus))
+ pr_debug("%s: can't enable_net_traffic() - %d\n",
+ net->name, res);
+ res = -EIO;
+ usb_kill_urb(pegasus->rx_urb);
+ usb_kill_urb(pegasus->intr_urb);
+ free_skb_pool(pegasus);
+ goto exit;
+ }
+ set_carrier(net);
+ netif_start_queue(net);
+ if (netif_msg_ifup(pegasus))
+ pr_debug("%s: open\n", net->name);
+ res = 0;
+exit:
+ return res;
+}
+
+static int pegasus_close(struct net_device *net)
+{
+ pegasus_t *pegasus = netdev_priv(net);
+
+ netif_stop_queue(net);
+ if (!(pegasus->flags & PEGASUS_UNPLUG))
+ disable_net_traffic(pegasus);
+ tasklet_kill(&pegasus->rx_tl);
+ unlink_all_urbs(pegasus);
+
+ return 0;
+}
+
+static void pegasus_get_drvinfo(struct net_device *dev,
+ struct ethtool_drvinfo *info)
+{
+ pegasus_t *pegasus = netdev_priv(dev);
+ strncpy(info->driver, driver_name, sizeof (info->driver) - 1);
+ strncpy(info->version, DRIVER_VERSION, sizeof (info->version) - 1);
+ usb_make_path(pegasus->usb, info->bus_info, sizeof (info->bus_info));
+}
+
+/* also handles three patterns of some kind in hardware */
+#define WOL_SUPPORTED (WAKE_MAGIC|WAKE_PHY)
+
+static void
+pegasus_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+ pegasus_t *pegasus = netdev_priv(dev);
+
+ wol->supported = WAKE_MAGIC | WAKE_PHY;
+ wol->wolopts = pegasus->wolopts;
+}
+
+static int
+pegasus_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+ pegasus_t *pegasus = netdev_priv(dev);
+ u8 reg78 = 0x04;
+
+ if (wol->wolopts & ~WOL_SUPPORTED)
+ return -EINVAL;
+
+ if (wol->wolopts & WAKE_MAGIC)
+ reg78 |= 0x80;
+ if (wol->wolopts & WAKE_PHY)
+ reg78 |= 0x40;
+ /* FIXME this 0x10 bit still needs to get set in the chip... */
+ if (wol->wolopts)
+ pegasus->eth_regs[0] |= 0x10;
+ else
+ pegasus->eth_regs[0] &= ~0x10;
+ pegasus->wolopts = wol->wolopts;
+ return set_register(pegasus, WakeupControl, reg78);
+}
+
+static inline void pegasus_reset_wol(struct net_device *dev)
+{
+ struct ethtool_wolinfo wol;
+
+ memset(&wol, 0, sizeof wol);
+ (void) pegasus_set_wol(dev, &wol);
+}
+
+static int
+pegasus_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
+{
+ pegasus_t *pegasus;
+
+ if (in_atomic())
+ return 0;
+
+ pegasus = netdev_priv(dev);
+ mii_ethtool_gset(&pegasus->mii, ecmd);
+
+ return 0;
+}
+
+static int
+pegasus_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
+{
+ pegasus_t *pegasus = netdev_priv(dev);
+ return mii_ethtool_sset(&pegasus->mii, ecmd);
+}
+
+static int pegasus_nway_reset(struct net_device *dev)
+{
+ pegasus_t *pegasus = netdev_priv(dev);
+ return mii_nway_restart(&pegasus->mii);
+}
+
+static u32 pegasus_get_link(struct net_device *dev)
+{
+ pegasus_t *pegasus = netdev_priv(dev);
+ return mii_link_ok(&pegasus->mii);
+}
+
+static u32 pegasus_get_msglevel(struct net_device *dev)
+{
+ pegasus_t *pegasus = netdev_priv(dev);
+ return pegasus->msg_enable;
+}
+
+static void pegasus_set_msglevel(struct net_device *dev, u32 v)
+{
+ pegasus_t *pegasus = netdev_priv(dev);
+ pegasus->msg_enable = v;
+}
+
+static struct ethtool_ops ops = {
+ .get_drvinfo = pegasus_get_drvinfo,
+ .get_settings = pegasus_get_settings,
+ .set_settings = pegasus_set_settings,
+ .nway_reset = pegasus_nway_reset,
+ .get_link = pegasus_get_link,
+ .get_msglevel = pegasus_get_msglevel,
+ .set_msglevel = pegasus_set_msglevel,
+ .get_wol = pegasus_get_wol,
+ .set_wol = pegasus_set_wol,
+};
+
+static int pegasus_ioctl(struct net_device *net, struct ifreq *rq, int cmd)
+{
+ __u16 *data = (__u16 *) & rq->ifr_ifru;
+ pegasus_t *pegasus = netdev_priv(net);
+ int res;
+
+ switch (cmd) {
+ case SIOCDEVPRIVATE:
+ data[0] = pegasus->phy;
+ case SIOCDEVPRIVATE + 1:
+ read_mii_word(pegasus, data[0], data[1] & 0x1f, &data[3]);
+ res = 0;
+ break;
+ case SIOCDEVPRIVATE + 2:
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+ write_mii_word(pegasus, pegasus->phy, data[1] & 0x1f, data[2]);
+ res = 0;
+ break;
+ default:
+ res = -EOPNOTSUPP;
+ }
+ return res;
+}
+
+static void pegasus_set_multicast(struct net_device *net)
+{
+ pegasus_t *pegasus = netdev_priv(net);
+
+ if (net->flags & IFF_PROMISC) {
+ pegasus->eth_regs[EthCtrl2] |= RX_PROMISCUOUS;
+ if (netif_msg_link(pegasus))
+ pr_info("%s: Promiscuous mode enabled.\n", net->name);
+ } else if (net->mc_count ||
+ (net->flags & IFF_ALLMULTI)) {
+ pegasus->eth_regs[EthCtrl0] |= RX_MULTICAST;
+ pegasus->eth_regs[EthCtrl2] &= ~RX_PROMISCUOUS;
+ if (netif_msg_link(pegasus))
+ pr_info("%s: set allmulti\n", net->name);
+ } else {
+ pegasus->eth_regs[EthCtrl0] &= ~RX_MULTICAST;
+ pegasus->eth_regs[EthCtrl2] &= ~RX_PROMISCUOUS;
+ }
+
+ pegasus->flags |= ETH_REGS_CHANGE;
+ ctrl_callback(pegasus->ctrl_urb);
+}
+
+static __u8 mii_phy_probe(pegasus_t * pegasus)
+{
+ int i;
+ __u16 tmp;
+
+ for (i = 0; i < 32; i++) {
+ read_mii_word(pegasus, i, MII_BMSR, &tmp);
+ if (tmp == 0 || tmp == 0xffff || (tmp & BMSR_MEDIA) == 0)
+ continue;
+ else
+ return i;
+ }
+
+ return 0xff;
+}
+
+static inline void setup_pegasus_II(pegasus_t * pegasus)
+{
+ __u8 data = 0xa5;
+
+ set_register(pegasus, Reg1d, 0);
+ set_register(pegasus, Reg7b, 1);
+ mdelay(100);
+ if ((pegasus->features & HAS_HOME_PNA) && mii_mode)
+ set_register(pegasus, Reg7b, 0);
+ else
+ set_register(pegasus, Reg7b, 2);
+
+ set_register(pegasus, 0x83, data);
+ get_registers(pegasus, 0x83, 1, &data);
+
+ if (data == 0xa5) {
+ pegasus->chip = 0x8513;
+ } else {
+ pegasus->chip = 0;
+ }
+
+ set_register(pegasus, 0x80, 0xc0);
+ set_register(pegasus, 0x83, 0xff);
+ set_register(pegasus, 0x84, 0x01);
+
+ if (pegasus->features & HAS_HOME_PNA && mii_mode)
+ set_register(pegasus, Reg81, 6);
+ else
+ set_register(pegasus, Reg81, 2);
+}
+
+
+static struct workqueue_struct *pegasus_workqueue = NULL;
+#define CARRIER_CHECK_DELAY (2 * HZ)
+
+static void check_carrier(struct work_struct *work)
+{
+ pegasus_t *pegasus = container_of(work, pegasus_t, carrier_check.work);
+ set_carrier(pegasus->net);
+ if (!(pegasus->flags & PEGASUS_UNPLUG)) {
+ queue_delayed_work(pegasus_workqueue, &pegasus->carrier_check,
+ CARRIER_CHECK_DELAY);
+ }
+}
+
+static int pegasus_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ struct usb_device *dev = interface_to_usbdev(intf);
+ struct net_device *net;
+ pegasus_t *pegasus;
+ int dev_index = id - pegasus_ids;
+ int res = -ENOMEM;
+
+ usb_get_dev(dev);
+ net = alloc_etherdev(sizeof(struct pegasus));
+ if (!net) {
+ dev_err(&intf->dev, "can't allocate %s\n", "device");
+ goto out;
+ }
+
+ pegasus = netdev_priv(net);
+ memset(pegasus, 0, sizeof (struct pegasus));
+ pegasus->dev_index = dev_index;
+ init_waitqueue_head(&pegasus->ctrl_wait);
+
+ if (!alloc_urbs(pegasus)) {
+ dev_err(&intf->dev, "can't allocate %s\n", "urbs");
+ goto out1;
+ }
+
+ tasklet_init(&pegasus->rx_tl, rx_fixup, (unsigned long) pegasus);
+
+ INIT_DELAYED_WORK(&pegasus->carrier_check, check_carrier);
+
+ pegasus->intf = intf;
+ pegasus->usb = dev;
+ pegasus->net = net;
+ SET_MODULE_OWNER(net);
+ net->open = pegasus_open;
+ net->stop = pegasus_close;
+ net->watchdog_timeo = PEGASUS_TX_TIMEOUT;
+ net->tx_timeout = pegasus_tx_timeout;
+ net->do_ioctl = pegasus_ioctl;
+ net->hard_start_xmit = pegasus_start_xmit;
+ net->set_multicast_list = pegasus_set_multicast;
+ net->get_stats = pegasus_netdev_stats;
+ SET_ETHTOOL_OPS(net, &ops);
+ pegasus->mii.dev = net;
+ pegasus->mii.mdio_read = mdio_read;
+ pegasus->mii.mdio_write = mdio_write;
+ pegasus->mii.phy_id_mask = 0x1f;
+ pegasus->mii.reg_num_mask = 0x1f;
+ spin_lock_init(&pegasus->rx_pool_lock);
+ pegasus->msg_enable = netif_msg_init (msg_level, NETIF_MSG_DRV
+ | NETIF_MSG_PROBE | NETIF_MSG_LINK);
+
+ pegasus->features = usb_dev_id[dev_index].private;
+ get_interrupt_interval(pegasus);
+ if (reset_mac(pegasus)) {
+ dev_err(&intf->dev, "can't reset MAC\n");
+ res = -EIO;
+ goto out2;
+ }
+ set_ethernet_addr(pegasus);
+ fill_skb_pool(pegasus);
+ if (pegasus->features & PEGASUS_II) {
+ dev_info(&intf->dev, "setup Pegasus II specific registers\n");
+ setup_pegasus_II(pegasus);
+ }
+ pegasus->phy = mii_phy_probe(pegasus);
+ if (pegasus->phy == 0xff) {
+ dev_warn(&intf->dev, "can't locate MII phy, using default\n");
+ pegasus->phy = 1;
+ }
+ pegasus->mii.phy_id = pegasus->phy;
+ usb_set_intfdata(intf, pegasus);
+ SET_NETDEV_DEV(net, &intf->dev);
+ pegasus_reset_wol(net);
+ res = register_netdev(net);
+ if (res)
+ goto out3;
+ queue_delayed_work(pegasus_workqueue, &pegasus->carrier_check,
+ CARRIER_CHECK_DELAY);
+
+ dev_info(&intf->dev, "%s, %s, %02x:%02x:%02x:%02x:%02x:%02x\n",
+ net->name,
+ usb_dev_id[dev_index].name,
+ net->dev_addr [0], net->dev_addr [1],
+ net->dev_addr [2], net->dev_addr [3],
+ net->dev_addr [4], net->dev_addr [5]);
+ return 0;
+
+out3:
+ usb_set_intfdata(intf, NULL);
+ free_skb_pool(pegasus);
+out2:
+ free_all_urbs(pegasus);
+out1:
+ free_netdev(net);
+out:
+ usb_put_dev(dev);
+ return res;
+}
+
+static void pegasus_disconnect(struct usb_interface *intf)
+{
+ struct pegasus *pegasus = usb_get_intfdata(intf);
+
+ usb_set_intfdata(intf, NULL);
+ if (!pegasus) {
+ dev_dbg(&intf->dev, "unregistering non-bound device?\n");
+ return;
+ }
+
+ pegasus->flags |= PEGASUS_UNPLUG;
+ cancel_delayed_work(&pegasus->carrier_check);
+ unregister_netdev(pegasus->net);
+ usb_put_dev(interface_to_usbdev(intf));
+ unlink_all_urbs(pegasus);
+ free_all_urbs(pegasus);
+ free_skb_pool(pegasus);
+ if (pegasus->rx_skb != NULL) {
+ dev_kfree_skb(pegasus->rx_skb);
+ pegasus->rx_skb = NULL;
+ }
+ free_netdev(pegasus->net);
+}
+
+static int pegasus_suspend (struct usb_interface *intf, pm_message_t message)
+{
+ struct pegasus *pegasus = usb_get_intfdata(intf);
+
+ netif_device_detach (pegasus->net);
+ cancel_delayed_work(&pegasus->carrier_check);
+ if (netif_running(pegasus->net)) {
+ usb_kill_urb(pegasus->rx_urb);
+ usb_kill_urb(pegasus->intr_urb);
+ }
+ return 0;
+}
+
+static int pegasus_resume (struct usb_interface *intf)
+{
+ struct pegasus *pegasus = usb_get_intfdata(intf);
+
+ netif_device_attach (pegasus->net);
+ if (netif_running(pegasus->net)) {
+ pegasus->rx_urb->status = 0;
+ pegasus->rx_urb->actual_length = 0;
+ read_bulk_callback(pegasus->rx_urb);
+
+ pegasus->intr_urb->status = 0;
+ pegasus->intr_urb->actual_length = 0;
+ intr_callback(pegasus->intr_urb);
+ }
+ queue_delayed_work(pegasus_workqueue, &pegasus->carrier_check,
+ CARRIER_CHECK_DELAY);
+ return 0;
+}
+
+static struct usb_driver pegasus_driver = {
+ .name = driver_name,
+ .probe = pegasus_probe,
+ .disconnect = pegasus_disconnect,
+ .id_table = pegasus_ids,
+ .suspend = pegasus_suspend,
+ .resume = pegasus_resume,
+};
+
+static void parse_id(char *id)
+{
+ unsigned int vendor_id=0, device_id=0, flags=0, i=0;
+ char *token, *name=NULL;
+
+ if ((token = strsep(&id, ":")) != NULL)
+ name = token;
+ /* name now points to a null terminated string*/
+ if ((token = strsep(&id, ":")) != NULL)
+ vendor_id = simple_strtoul(token, NULL, 16);
+ if ((token = strsep(&id, ":")) != NULL)
+ device_id = simple_strtoul(token, NULL, 16);
+ flags = simple_strtoul(id, NULL, 16);
+ pr_info("%s: new device %s, vendor ID 0x%04x, device ID 0x%04x, flags: 0x%x\n",
+ driver_name, name, vendor_id, device_id, flags);
+
+ if (vendor_id > 0x10000 || vendor_id == 0)
+ return;
+ if (device_id > 0x10000 || device_id == 0)
+ return;
+
+ for (i=0; usb_dev_id[i].name; i++);
+ usb_dev_id[i].name = name;
+ usb_dev_id[i].vendor = vendor_id;
+ usb_dev_id[i].device = device_id;
+ usb_dev_id[i].private = flags;
+ pegasus_ids[i].match_flags = USB_DEVICE_ID_MATCH_DEVICE;
+ pegasus_ids[i].idVendor = vendor_id;
+ pegasus_ids[i].idProduct = device_id;
+}
+
+static int __init pegasus_init(void)
+{
+ pr_info("%s: %s, " DRIVER_DESC "\n", driver_name, DRIVER_VERSION);
+ if (devid)
+ parse_id(devid);
+ pegasus_workqueue = create_singlethread_workqueue("pegasus");
+ if (!pegasus_workqueue)
+ return -ENOMEM;
+ return usb_register(&pegasus_driver);
+}
+
+static void __exit pegasus_exit(void)
+{
+ destroy_workqueue(pegasus_workqueue);
+ usb_deregister(&pegasus_driver);
+}
+
+module_init(pegasus_init);
+module_exit(pegasus_exit);
diff --git a/drivers/net/usb/pegasus.h b/drivers/net/usb/pegasus.h
new file mode 100644
index 0000000..c746782
--- /dev/null
+++ b/drivers/net/usb/pegasus.h
@@ -0,0 +1,307 @@
+/*
+ * Copyright (c) 1999-2003 Petko Manolov - Petkan (petkan@users.sourceforge.net)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+
+#ifndef PEGASUS_DEV
+
+#define PEGASUS_II 0x80000000
+#define HAS_HOME_PNA 0x40000000
+
+#define PEGASUS_MTU 1536
+#define RX_SKBS 4
+
+#define EPROM_WRITE 0x01
+#define EPROM_READ 0x02
+#define EPROM_DONE 0x04
+#define EPROM_WR_ENABLE 0x10
+#define EPROM_LOAD 0x20
+
+#define PHY_DONE 0x80
+#define PHY_READ 0x40
+#define PHY_WRITE 0x20
+#define DEFAULT_GPIO_RESET 0x24
+#define DEFAULT_GPIO_SET 0x26
+
+#define PEGASUS_PRESENT 0x00000001
+#define PEGASUS_TX_BUSY 0x00000004
+#define PEGASUS_RX_BUSY 0x00000008
+#define CTRL_URB_RUNNING 0x00000010
+#define CTRL_URB_SLEEP 0x00000020
+#define PEGASUS_UNPLUG 0x00000040
+#define PEGASUS_RX_URB_FAIL 0x00000080
+#define ETH_REGS_CHANGE 0x40000000
+#define ETH_REGS_CHANGED 0x80000000
+
+#define RX_MULTICAST 2
+#define RX_PROMISCUOUS 4
+
+#define REG_TIMEOUT (HZ)
+#define PEGASUS_TX_TIMEOUT (HZ*10)
+
+#define TX_UNDERRUN 0x80
+#define EXCESSIVE_COL 0x40
+#define LATE_COL 0x20
+#define NO_CARRIER 0x10
+#define LOSS_CARRIER 0x08
+#define JABBER_TIMEOUT 0x04
+
+#define LINK_STATUS 0x01
+
+#define PEGASUS_REQT_READ 0xc0
+#define PEGASUS_REQT_WRITE 0x40
+#define PEGASUS_REQ_GET_REGS 0xf0
+#define PEGASUS_REQ_SET_REGS 0xf1
+#define PEGASUS_REQ_SET_REG PEGASUS_REQ_SET_REGS
+
+enum pegasus_registers {
+ EthCtrl0 = 0,
+ EthCtrl1 = 1,
+ EthCtrl2 = 2,
+ EthID = 0x10,
+ Reg1d = 0x1d,
+ EpromOffset = 0x20,
+ EpromData = 0x21, /* 0x21 low, 0x22 high byte */
+ EpromCtrl = 0x23,
+ PhyAddr = 0x25,
+ PhyData = 0x26, /* 0x26 low, 0x27 high byte */
+ PhyCtrl = 0x28,
+ UsbStst = 0x2a,
+ EthTxStat0 = 0x2b,
+ EthTxStat1 = 0x2c,
+ EthRxStat = 0x2d,
+ WakeupControl = 0x78,
+ Reg7b = 0x7b,
+ Gpio0 = 0x7e,
+ Gpio1 = 0x7f,
+ Reg81 = 0x81,
+};
+
+
+typedef struct pegasus {
+ struct usb_device *usb;
+ struct usb_interface *intf;
+ struct net_device *net;
+ struct net_device_stats stats;
+ struct mii_if_info mii;
+ unsigned flags;
+ unsigned features;
+ u32 msg_enable;
+ u32 wolopts;
+ int dev_index;
+ int intr_interval;
+ struct tasklet_struct rx_tl;
+ struct delayed_work carrier_check;
+ struct urb *ctrl_urb, *rx_urb, *tx_urb, *intr_urb;
+ struct sk_buff *rx_pool[RX_SKBS];
+ struct sk_buff *rx_skb;
+ struct usb_ctrlrequest dr;
+ wait_queue_head_t ctrl_wait;
+ spinlock_t rx_pool_lock;
+ int chip;
+ unsigned char intr_buff[8];
+ __u8 tx_buff[PEGASUS_MTU];
+ __u8 eth_regs[4];
+ __u8 phy;
+ __u8 gpio_res;
+} pegasus_t;
+
+
+struct usb_eth_dev {
+ char *name;
+ __u16 vendor;
+ __u16 device;
+ __u32 private; /* LSB is gpio reset value */
+};
+
+#define VENDOR_3COM 0x0506
+#define VENDOR_ABOCOM 0x07b8
+#define VENDOR_ACCTON 0x083a
+#define VENDOR_ADMTEK 0x07a6
+#define VENDOR_AEILAB 0x3334
+#define VENDOR_ALLIEDTEL 0x07c9
+#define VENDOR_ATEN 0x0557
+#define VENDOR_BELKIN 0x050d
+#define VENDOR_BILLIONTON 0x08dd
+#define VENDOR_COMPAQ 0x049f
+#define VENDOR_COREGA 0x07aa
+#define VENDOR_DLINK 0x2001
+#define VENDOR_ELCON 0x0db7
+#define VENDOR_ELECOM 0x056e
+#define VENDOR_ELSA 0x05cc
+#define VENDOR_GIGABYTE 0x1044
+#define VENDOR_HAWKING 0x0e66
+#define VENDOR_HP 0x03f0
+#define VENDOR_IODATA 0x04bb
+#define VENDOR_KINGSTON 0x0951
+#define VENDOR_LANEED 0x056e
+#define VENDOR_LINKSYS 0x066b
+#define VENDOR_LINKSYS2 0x077b
+#define VENDOR_MELCO 0x0411
+#define VENDOR_MICROSOFT 0x045e
+#define VENDOR_MOBILITY 0x1342
+#define VENDOR_NETGEAR 0x0846
+#define VENDOR_OCT 0x0b39
+#define VENDOR_SMARTBRIDGES 0x08d1
+#define VENDOR_SMC 0x0707
+#define VENDOR_SOHOWARE 0x15e8
+#define VENDOR_SIEMENS 0x067c
+
+
+#else /* PEGASUS_DEV */
+
+PEGASUS_DEV( "3Com USB Ethernet 3C460B", VENDOR_3COM, 0x4601,
+ DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "ATEN USB Ethernet UC-110T", VENDOR_ATEN, 0x2007,
+ DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "USB HPNA/Ethernet", VENDOR_ABOCOM, 0x110c,
+ DEFAULT_GPIO_RESET | PEGASUS_II | HAS_HOME_PNA )
+PEGASUS_DEV( "USB HPNA/Ethernet", VENDOR_ABOCOM, 0x4104,
+ DEFAULT_GPIO_RESET | HAS_HOME_PNA )
+PEGASUS_DEV( "USB HPNA/Ethernet", VENDOR_ABOCOM, 0x4004,
+ DEFAULT_GPIO_RESET | HAS_HOME_PNA )
+PEGASUS_DEV( "USB HPNA/Ethernet", VENDOR_ABOCOM, 0x4007,
+ DEFAULT_GPIO_RESET | HAS_HOME_PNA )
+PEGASUS_DEV( "USB 10/100 Fast Ethernet", VENDOR_ABOCOM, 0x4102,
+ DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "USB 10/100 Fast Ethernet", VENDOR_ABOCOM, 0x4002,
+ DEFAULT_GPIO_RESET )
+PEGASUS_DEV( "USB 10/100 Fast Ethernet", VENDOR_ABOCOM, 0x400b,
+ DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "USB 10/100 Fast Ethernet", VENDOR_ABOCOM, 0x400c,
+ DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "USB 10/100 Fast Ethernet", VENDOR_ABOCOM, 0xabc1,
+ DEFAULT_GPIO_RESET )
+PEGASUS_DEV( "USB 10/100 Fast Ethernet", VENDOR_ABOCOM, 0x200c,
+ DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "Accton USB 10/100 Ethernet Adapter", VENDOR_ACCTON, 0x1046,
+ DEFAULT_GPIO_RESET )
+PEGASUS_DEV( "SpeedStream USB 10/100 Ethernet", VENDOR_ACCTON, 0x5046,
+ DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "Philips USB 10/100 Ethernet", VENDOR_ACCTON, 0xb004,
+ DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "ADMtek ADM8511 \"Pegasus II\" USB Ethernet",
+ VENDOR_ADMTEK, 0x8511,
+ DEFAULT_GPIO_RESET | PEGASUS_II | HAS_HOME_PNA )
+PEGASUS_DEV( "ADMtek ADM8513 \"Pegasus II\" USB Ethernet",
+ VENDOR_ADMTEK, 0x8513,
+ DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "ADMtek ADM8515 \"Pegasus II\" USB-2.0 Ethernet",
+ VENDOR_ADMTEK, 0x8515,
+ DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "ADMtek AN986 \"Pegasus\" USB Ethernet (evaluation board)",
+ VENDOR_ADMTEK, 0x0986,
+ DEFAULT_GPIO_RESET | HAS_HOME_PNA )
+PEGASUS_DEV( "AN986A USB MAC", VENDOR_ADMTEK, 1986,
+ DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "AEI USB Fast Ethernet Adapter", VENDOR_AEILAB, 0x1701,
+ DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "Allied Telesyn Int. AT-USB100", VENDOR_ALLIEDTEL, 0xb100,
+ DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "Belkin F5D5050 USB Ethernet", VENDOR_BELKIN, 0x0121,
+ DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "Billionton USB-100", VENDOR_BILLIONTON, 0x0986,
+ DEFAULT_GPIO_RESET )
+PEGASUS_DEV( "Billionton USBLP-100", VENDOR_BILLIONTON, 0x0987,
+ DEFAULT_GPIO_RESET | HAS_HOME_PNA )
+PEGASUS_DEV( "iPAQ Networking 10/100 USB", VENDOR_COMPAQ, 0x8511,
+ DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "Billionton USBEL-100", VENDOR_BILLIONTON, 0x0988,
+ DEFAULT_GPIO_RESET )
+PEGASUS_DEV( "Billionton USBE-100", VENDOR_BILLIONTON, 0x8511,
+ DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "Corega FEther USB-TX", VENDOR_COREGA, 0x0004,
+ DEFAULT_GPIO_RESET )
+PEGASUS_DEV( "Corega FEther USB-TXS", VENDOR_COREGA, 0x000d,
+ DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "D-Link DSB-650TX", VENDOR_DLINK, 0x4001,
+ DEFAULT_GPIO_RESET )
+PEGASUS_DEV( "D-Link DSB-650TX", VENDOR_DLINK, 0x4002,
+ DEFAULT_GPIO_RESET )
+PEGASUS_DEV( "D-Link DSB-650TX", VENDOR_DLINK, 0x4102,
+ DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "D-Link DSB-650TX", VENDOR_DLINK, 0x400b,
+ DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "D-Link DSB-650TX", VENDOR_DLINK, 0x200c,
+ DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "D-Link DSB-650TX(PNA)", VENDOR_DLINK, 0x4003,
+ DEFAULT_GPIO_RESET | HAS_HOME_PNA )
+PEGASUS_DEV( "D-Link DSB-650", VENDOR_DLINK, 0xabc1,
+ DEFAULT_GPIO_RESET )
+PEGASUS_DEV( "GOLDPFEIL USB Adapter", VENDOR_ELCON, 0x0002,
+ DEFAULT_GPIO_RESET | PEGASUS_II | HAS_HOME_PNA )
+PEGASUS_DEV( "ELECOM USB Ethernet LD-USB20", VENDOR_ELECOM, 0x4010,
+ DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "EasiDock Ethernet", VENDOR_MOBILITY, 0x0304,
+ DEFAULT_GPIO_RESET )
+PEGASUS_DEV( "Elsa Micolink USB2Ethernet", VENDOR_ELSA, 0x3000,
+ DEFAULT_GPIO_RESET )
+PEGASUS_DEV( "GIGABYTE GN-BR402W Wireless Router", VENDOR_GIGABYTE, 0x8002,
+ DEFAULT_GPIO_RESET )
+PEGASUS_DEV( "Hawking UF100 10/100 Ethernet", VENDOR_HAWKING, 0x400c,
+ DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "HP hn210c Ethernet USB", VENDOR_HP, 0x811c,
+ DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "IO DATA USB ET/TX", VENDOR_IODATA, 0x0904,
+ DEFAULT_GPIO_RESET )
+PEGASUS_DEV( "IO DATA USB ET/TX-S", VENDOR_IODATA, 0x0913,
+ DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "Kingston KNU101TX Ethernet", VENDOR_KINGSTON, 0x000a,
+ DEFAULT_GPIO_RESET)
+PEGASUS_DEV( "LANEED USB Ethernet LD-USB/TX", VENDOR_LANEED, 0x4002,
+ DEFAULT_GPIO_RESET )
+PEGASUS_DEV( "LANEED USB Ethernet LD-USBL/TX", VENDOR_LANEED, 0x4005,
+ DEFAULT_GPIO_RESET | PEGASUS_II)
+PEGASUS_DEV( "LANEED USB Ethernet LD-USB/TX", VENDOR_LANEED, 0x400b,
+ DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "LANEED USB Ethernet LD-USB/T", VENDOR_LANEED, 0xabc1,
+ DEFAULT_GPIO_RESET )
+PEGASUS_DEV( "LANEED USB Ethernet LD-USB/TX", VENDOR_LANEED, 0x200c,
+ DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "Linksys USB10TX", VENDOR_LINKSYS, 0x2202,
+ DEFAULT_GPIO_RESET )
+PEGASUS_DEV( "Linksys USB100TX", VENDOR_LINKSYS, 0x2203,
+ DEFAULT_GPIO_RESET )
+PEGASUS_DEV( "Linksys USB100TX", VENDOR_LINKSYS, 0x2204,
+ DEFAULT_GPIO_RESET | HAS_HOME_PNA )
+PEGASUS_DEV( "Linksys USB10T Ethernet Adapter", VENDOR_LINKSYS, 0x2206,
+ DEFAULT_GPIO_RESET | PEGASUS_II)
+PEGASUS_DEV( "Linksys USBVPN1", VENDOR_LINKSYS2, 0x08b4,
+ DEFAULT_GPIO_RESET )
+PEGASUS_DEV( "Linksys USB USB100TX", VENDOR_LINKSYS, 0x400b,
+ DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "Linksys USB10TX", VENDOR_LINKSYS, 0x200c,
+ DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "MELCO/BUFFALO LUA-TX", VENDOR_MELCO, 0x0001,
+ DEFAULT_GPIO_RESET )
+PEGASUS_DEV( "MELCO/BUFFALO LUA-TX", VENDOR_MELCO, 0x0005,
+ DEFAULT_GPIO_RESET )
+PEGASUS_DEV( "MELCO/BUFFALO LUA2-TX", VENDOR_MELCO, 0x0009,
+ DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "Microsoft MN-110", VENDOR_MICROSOFT, 0x007a,
+ DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "NETGEAR FA101", VENDOR_NETGEAR, 0x1020,
+ DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "OCT Inc.", VENDOR_OCT, 0x0109,
+ DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "OCT USB TO Ethernet", VENDOR_OCT, 0x0901,
+ DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "smartNIC 2 PnP Adapter", VENDOR_SMARTBRIDGES, 0x0003,
+ DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "SMC 202 USB Ethernet", VENDOR_SMC, 0x0200,
+ DEFAULT_GPIO_RESET )
+PEGASUS_DEV( "SMC 2206 USB Ethernet", VENDOR_SMC, 0x0201,
+ DEFAULT_GPIO_RESET | PEGASUS_II)
+PEGASUS_DEV( "SOHOware NUB100 Ethernet", VENDOR_SOHOWARE, 0x9100,
+ DEFAULT_GPIO_RESET )
+PEGASUS_DEV( "SOHOware NUB110 Ethernet", VENDOR_SOHOWARE, 0x9110,
+ DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "SpeedStream USB 10/100 Ethernet", VENDOR_SIEMENS, 0x1001,
+ DEFAULT_GPIO_RESET | PEGASUS_II )
+
+
+#endif /* PEGASUS_DEV */
diff --git a/drivers/net/usb/plusb.c b/drivers/net/usb/plusb.c
new file mode 100644
index 0000000..4530093
--- /dev/null
+++ b/drivers/net/usb/plusb.c
@@ -0,0 +1,150 @@
+/*
+ * PL-2301/2302 USB host-to-host link cables
+ * Copyright (C) 2000-2005 by David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+// #define DEBUG // error path messages, extra info
+// #define VERBOSE // more; success messages
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/workqueue.h>
+#include <linux/mii.h>
+#include <linux/usb.h>
+
+#include "usbnet.h"
+
+
+/*
+ * Prolific PL-2301/PL-2302 driver ... http://www.prolifictech.com
+ *
+ * The protocol and handshaking used here should be bug-compatible
+ * with the Linux 2.2 "plusb" driver, by Deti Fliegl.
+ *
+ * HEADS UP: this handshaking isn't all that robust. This driver
+ * gets confused easily if you unplug one end of the cable then
+ * try to connect it again; you'll need to restart both ends. The
+ * "naplink" software (used by some PlayStation/2 deveopers) does
+ * the handshaking much better! Also, sometimes this hardware
+ * seems to get wedged under load. Prolific docs are weak, and
+ * don't identify differences between PL2301 and PL2302, much less
+ * anything to explain the different PL2302 versions observed.
+ */
+
+/*
+ * Bits 0-4 can be used for software handshaking; they're set from
+ * one end, cleared from the other, "read" with the interrupt byte.
+ */
+#define PL_S_EN (1<<7) /* (feature only) suspend enable */
+/* reserved bit -- rx ready (6) ? */
+#define PL_TX_READY (1<<5) /* (interrupt only) transmit ready */
+#define PL_RESET_OUT (1<<4) /* reset output pipe */
+#define PL_RESET_IN (1<<3) /* reset input pipe */
+#define PL_TX_C (1<<2) /* transmission complete */
+#define PL_TX_REQ (1<<1) /* transmission received */
+#define PL_PEER_E (1<<0) /* peer exists */
+
+static inline int
+pl_vendor_req(struct usbnet *dev, u8 req, u8 val, u8 index)
+{
+ return usb_control_msg(dev->udev,
+ usb_rcvctrlpipe(dev->udev, 0),
+ req,
+ USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ val, index,
+ NULL, 0,
+ USB_CTRL_GET_TIMEOUT);
+}
+
+static inline int
+pl_clear_QuickLink_features(struct usbnet *dev, int val)
+{
+ return pl_vendor_req(dev, 1, (u8) val, 0);
+}
+
+static inline int
+pl_set_QuickLink_features(struct usbnet *dev, int val)
+{
+ return pl_vendor_req(dev, 3, (u8) val, 0);
+}
+
+static int pl_reset(struct usbnet *dev)
+{
+ /* some units seem to need this reset, others reject it utterly.
+ * FIXME be more like "naplink" or windows drivers.
+ */
+ (void) pl_set_QuickLink_features(dev,
+ PL_S_EN|PL_RESET_OUT|PL_RESET_IN|PL_PEER_E);
+ return 0;
+}
+
+static const struct driver_info prolific_info = {
+ .description = "Prolific PL-2301/PL-2302",
+ .flags = FLAG_NO_SETINT,
+ /* some PL-2302 versions seem to fail usb_set_interface() */
+ .reset = pl_reset,
+};
+
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * Proilific's name won't normally be on the cables, and
+ * may not be on the device.
+ */
+
+static const struct usb_device_id products [] = {
+
+{
+ USB_DEVICE(0x067b, 0x0000), // PL-2301
+ .driver_info = (unsigned long) &prolific_info,
+}, {
+ USB_DEVICE(0x067b, 0x0001), // PL-2302
+ .driver_info = (unsigned long) &prolific_info,
+},
+
+ { }, // END
+};
+MODULE_DEVICE_TABLE(usb, products);
+
+static struct usb_driver plusb_driver = {
+ .name = "plusb",
+ .id_table = products,
+ .probe = usbnet_probe,
+ .disconnect = usbnet_disconnect,
+ .suspend = usbnet_suspend,
+ .resume = usbnet_resume,
+};
+
+static int __init plusb_init(void)
+{
+ return usb_register(&plusb_driver);
+}
+module_init(plusb_init);
+
+static void __exit plusb_exit(void)
+{
+ usb_deregister(&plusb_driver);
+}
+module_exit(plusb_exit);
+
+MODULE_AUTHOR("David Brownell");
+MODULE_DESCRIPTION("Prolific PL-2301/2302 USB Host to Host Link Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/usb/rndis_host.c b/drivers/net/usb/rndis_host.c
new file mode 100644
index 0000000..980e4aa
--- /dev/null
+++ b/drivers/net/usb/rndis_host.c
@@ -0,0 +1,727 @@
+/*
+ * Host Side support for RNDIS Networking Links
+ * Copyright (C) 2005 by David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+// #define DEBUG // error path messages, extra info
+// #define VERBOSE // more; success messages
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/workqueue.h>
+#include <linux/mii.h>
+#include <linux/usb.h>
+#include <linux/usb/cdc.h>
+
+#include "usbnet.h"
+
+
+/*
+ * RNDIS is NDIS remoted over USB. It's a MSFT variant of CDC ACM ... of
+ * course ACM was intended for modems, not Ethernet links! USB's standard
+ * for Ethernet links is "CDC Ethernet", which is significantly simpler.
+ *
+ * NOTE that Microsoft's "RNDIS 1.0" specification is incomplete. Issues
+ * include:
+ * - Power management in particular relies on information that's scattered
+ * through other documentation, and which is incomplete or incorrect even
+ * there.
+ * - There are various undocumented protocol requirements, such as the
+ * need to send unused garbage in control-OUT messages.
+ * - In some cases, MS-Windows will emit undocumented requests; this
+ * matters more to peripheral implementations than host ones.
+ *
+ * Moreover there's a no-open-specs variant of RNDIS called "ActiveSync".
+ *
+ * For these reasons and others, ** USE OF RNDIS IS STRONGLY DISCOURAGED ** in
+ * favor of such non-proprietary alternatives as CDC Ethernet or the newer (and
+ * currently rare) "Ethernet Emulation Model" (EEM).
+ */
+
+/*
+ * CONTROL uses CDC "encapsulated commands" with funky notifications.
+ * - control-out: SEND_ENCAPSULATED
+ * - interrupt-in: RESPONSE_AVAILABLE
+ * - control-in: GET_ENCAPSULATED
+ *
+ * We'll try to ignore the RESPONSE_AVAILABLE notifications.
+ *
+ * REVISIT some RNDIS implementations seem to have curious issues still
+ * to be resolved.
+ */
+struct rndis_msg_hdr {
+ __le32 msg_type; /* RNDIS_MSG_* */
+ __le32 msg_len;
+ // followed by data that varies between messages
+ __le32 request_id;
+ __le32 status;
+ // ... and more
+} __attribute__ ((packed));
+
+/* MS-Windows uses this strange size, but RNDIS spec says 1024 minimum */
+#define CONTROL_BUFFER_SIZE 1025
+
+/* RNDIS defines an (absurdly huge) 10 second control timeout,
+ * but ActiveSync seems to use a more usual 5 second timeout
+ * (which matches the USB 2.0 spec).
+ */
+#define RNDIS_CONTROL_TIMEOUT_MS (5 * 1000)
+
+
+#define ccpu2 __constant_cpu_to_le32
+
+#define RNDIS_MSG_COMPLETION ccpu2(0x80000000)
+
+/* codes for "msg_type" field of rndis messages;
+ * only the data channel uses packet messages (maybe batched);
+ * everything else goes on the control channel.
+ */
+#define RNDIS_MSG_PACKET ccpu2(0x00000001) /* 1-N packets */
+#define RNDIS_MSG_INIT ccpu2(0x00000002)
+#define RNDIS_MSG_INIT_C (RNDIS_MSG_INIT|RNDIS_MSG_COMPLETION)
+#define RNDIS_MSG_HALT ccpu2(0x00000003)
+#define RNDIS_MSG_QUERY ccpu2(0x00000004)
+#define RNDIS_MSG_QUERY_C (RNDIS_MSG_QUERY|RNDIS_MSG_COMPLETION)
+#define RNDIS_MSG_SET ccpu2(0x00000005)
+#define RNDIS_MSG_SET_C (RNDIS_MSG_SET|RNDIS_MSG_COMPLETION)
+#define RNDIS_MSG_RESET ccpu2(0x00000006)
+#define RNDIS_MSG_RESET_C (RNDIS_MSG_RESET|RNDIS_MSG_COMPLETION)
+#define RNDIS_MSG_INDICATE ccpu2(0x00000007)
+#define RNDIS_MSG_KEEPALIVE ccpu2(0x00000008)
+#define RNDIS_MSG_KEEPALIVE_C (RNDIS_MSG_KEEPALIVE|RNDIS_MSG_COMPLETION)
+
+/* codes for "status" field of completion messages */
+#define RNDIS_STATUS_SUCCESS ccpu2(0x00000000)
+#define RNDIS_STATUS_FAILURE ccpu2(0xc0000001)
+#define RNDIS_STATUS_INVALID_DATA ccpu2(0xc0010015)
+#define RNDIS_STATUS_NOT_SUPPORTED ccpu2(0xc00000bb)
+#define RNDIS_STATUS_MEDIA_CONNECT ccpu2(0x4001000b)
+#define RNDIS_STATUS_MEDIA_DISCONNECT ccpu2(0x4001000c)
+
+
+struct rndis_data_hdr {
+ __le32 msg_type; /* RNDIS_MSG_PACKET */
+ __le32 msg_len; // rndis_data_hdr + data_len + pad
+ __le32 data_offset; // 36 -- right after header
+ __le32 data_len; // ... real packet size
+
+ __le32 oob_data_offset; // zero
+ __le32 oob_data_len; // zero
+ __le32 num_oob; // zero
+ __le32 packet_data_offset; // zero
+
+ __le32 packet_data_len; // zero
+ __le32 vc_handle; // zero
+ __le32 reserved; // zero
+} __attribute__ ((packed));
+
+struct rndis_init { /* OUT */
+ // header and:
+ __le32 msg_type; /* RNDIS_MSG_INIT */
+ __le32 msg_len; // 24
+ __le32 request_id;
+ __le32 major_version; // of rndis (1.0)
+ __le32 minor_version;
+ __le32 max_transfer_size;
+} __attribute__ ((packed));
+
+struct rndis_init_c { /* IN */
+ // header and:
+ __le32 msg_type; /* RNDIS_MSG_INIT_C */
+ __le32 msg_len;
+ __le32 request_id;
+ __le32 status;
+ __le32 major_version; // of rndis (1.0)
+ __le32 minor_version;
+ __le32 device_flags;
+ __le32 medium; // zero == 802.3
+ __le32 max_packets_per_message;
+ __le32 max_transfer_size;
+ __le32 packet_alignment; // max 7; (1<<n) bytes
+ __le32 af_list_offset; // zero
+ __le32 af_list_size; // zero
+} __attribute__ ((packed));
+
+struct rndis_halt { /* OUT (no reply) */
+ // header and:
+ __le32 msg_type; /* RNDIS_MSG_HALT */
+ __le32 msg_len;
+ __le32 request_id;
+} __attribute__ ((packed));
+
+struct rndis_query { /* OUT */
+ // header and:
+ __le32 msg_type; /* RNDIS_MSG_QUERY */
+ __le32 msg_len;
+ __le32 request_id;
+ __le32 oid;
+ __le32 len;
+ __le32 offset;
+/*?*/ __le32 handle; // zero
+} __attribute__ ((packed));
+
+struct rndis_query_c { /* IN */
+ // header and:
+ __le32 msg_type; /* RNDIS_MSG_QUERY_C */
+ __le32 msg_len;
+ __le32 request_id;
+ __le32 status;
+ __le32 len;
+ __le32 offset;
+} __attribute__ ((packed));
+
+struct rndis_set { /* OUT */
+ // header and:
+ __le32 msg_type; /* RNDIS_MSG_SET */
+ __le32 msg_len;
+ __le32 request_id;
+ __le32 oid;
+ __le32 len;
+ __le32 offset;
+/*?*/ __le32 handle; // zero
+} __attribute__ ((packed));
+
+struct rndis_set_c { /* IN */
+ // header and:
+ __le32 msg_type; /* RNDIS_MSG_SET_C */
+ __le32 msg_len;
+ __le32 request_id;
+ __le32 status;
+} __attribute__ ((packed));
+
+struct rndis_reset { /* IN */
+ // header and:
+ __le32 msg_type; /* RNDIS_MSG_RESET */
+ __le32 msg_len;
+ __le32 reserved;
+} __attribute__ ((packed));
+
+struct rndis_reset_c { /* OUT */
+ // header and:
+ __le32 msg_type; /* RNDIS_MSG_RESET_C */
+ __le32 msg_len;
+ __le32 status;
+ __le32 addressing_lost;
+} __attribute__ ((packed));
+
+struct rndis_indicate { /* IN (unrequested) */
+ // header and:
+ __le32 msg_type; /* RNDIS_MSG_INDICATE */
+ __le32 msg_len;
+ __le32 status;
+ __le32 length;
+ __le32 offset;
+/**/ __le32 diag_status;
+ __le32 error_offset;
+/**/ __le32 message;
+} __attribute__ ((packed));
+
+struct rndis_keepalive { /* OUT (optionally IN) */
+ // header and:
+ __le32 msg_type; /* RNDIS_MSG_KEEPALIVE */
+ __le32 msg_len;
+ __le32 request_id;
+} __attribute__ ((packed));
+
+struct rndis_keepalive_c { /* IN (optionally OUT) */
+ // header and:
+ __le32 msg_type; /* RNDIS_MSG_KEEPALIVE_C */
+ __le32 msg_len;
+ __le32 request_id;
+ __le32 status;
+} __attribute__ ((packed));
+
+/* NOTE: about 30 OIDs are "mandatory" for peripherals to support ... and
+ * there are gobs more that may optionally be supported. We'll avoid as much
+ * of that mess as possible.
+ */
+#define OID_802_3_PERMANENT_ADDRESS ccpu2(0x01010101)
+#define OID_GEN_MAXIMUM_FRAME_SIZE ccpu2(0x00010106)
+#define OID_GEN_CURRENT_PACKET_FILTER ccpu2(0x0001010e)
+
+/*
+ * RNDIS notifications from device: command completion; "reverse"
+ * keepalives; etc
+ */
+static void rndis_status(struct usbnet *dev, struct urb *urb)
+{
+ devdbg(dev, "rndis status urb, len %d stat %d",
+ urb->actual_length, urb->status);
+ // FIXME for keepalives, respond immediately (asynchronously)
+ // if not an RNDIS status, do like cdc_status(dev,urb) does
+}
+
+/*
+ * RPC done RNDIS-style. Caller guarantees:
+ * - message is properly byteswapped
+ * - there's no other request pending
+ * - buf can hold up to 1KB response (required by RNDIS spec)
+ * On return, the first few entries are already byteswapped.
+ *
+ * Call context is likely probe(), before interface name is known,
+ * which is why we won't try to use it in the diagnostics.
+ */
+static int rndis_command(struct usbnet *dev, struct rndis_msg_hdr *buf)
+{
+ struct cdc_state *info = (void *) &dev->data;
+ int master_ifnum;
+ int retval;
+ unsigned count;
+ __le32 rsp;
+ u32 xid = 0, msg_len, request_id;
+
+ /* REVISIT when this gets called from contexts other than probe() or
+ * disconnect(): either serialize, or dispatch responses on xid
+ */
+
+ /* Issue the request; xid is unique, don't bother byteswapping it */
+ if (likely(buf->msg_type != RNDIS_MSG_HALT
+ && buf->msg_type != RNDIS_MSG_RESET)) {
+ xid = dev->xid++;
+ if (!xid)
+ xid = dev->xid++;
+ buf->request_id = (__force __le32) xid;
+ }
+ master_ifnum = info->control->cur_altsetting->desc.bInterfaceNumber;
+ retval = usb_control_msg(dev->udev,
+ usb_sndctrlpipe(dev->udev, 0),
+ USB_CDC_SEND_ENCAPSULATED_COMMAND,
+ USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+ 0, master_ifnum,
+ buf, le32_to_cpu(buf->msg_len),
+ RNDIS_CONTROL_TIMEOUT_MS);
+ if (unlikely(retval < 0 || xid == 0))
+ return retval;
+
+ // FIXME Seems like some devices discard responses when
+ // we time out and cancel our "get response" requests...
+ // so, this is fragile. Probably need to poll for status.
+
+ /* ignore status endpoint, just poll the control channel;
+ * the request probably completed immediately
+ */
+ rsp = buf->msg_type | RNDIS_MSG_COMPLETION;
+ for (count = 0; count < 10; count++) {
+ memset(buf, 0, CONTROL_BUFFER_SIZE);
+ retval = usb_control_msg(dev->udev,
+ usb_rcvctrlpipe(dev->udev, 0),
+ USB_CDC_GET_ENCAPSULATED_RESPONSE,
+ USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+ 0, master_ifnum,
+ buf, CONTROL_BUFFER_SIZE,
+ RNDIS_CONTROL_TIMEOUT_MS);
+ if (likely(retval >= 8)) {
+ msg_len = le32_to_cpu(buf->msg_len);
+ request_id = (__force u32) buf->request_id;
+ if (likely(buf->msg_type == rsp)) {
+ if (likely(request_id == xid)) {
+ if (unlikely(rsp == RNDIS_MSG_RESET_C))
+ return 0;
+ if (likely(RNDIS_STATUS_SUCCESS
+ == buf->status))
+ return 0;
+ dev_dbg(&info->control->dev,
+ "rndis reply status %08x\n",
+ le32_to_cpu(buf->status));
+ return -EL3RST;
+ }
+ dev_dbg(&info->control->dev,
+ "rndis reply id %d expected %d\n",
+ request_id, xid);
+ /* then likely retry */
+ } else switch (buf->msg_type) {
+ case RNDIS_MSG_INDICATE: { /* fault */
+ // struct rndis_indicate *msg = (void *)buf;
+ dev_info(&info->control->dev,
+ "rndis fault indication\n");
+ }
+ break;
+ case RNDIS_MSG_KEEPALIVE: { /* ping */
+ struct rndis_keepalive_c *msg = (void *)buf;
+
+ msg->msg_type = RNDIS_MSG_KEEPALIVE_C;
+ msg->msg_len = ccpu2(sizeof *msg);
+ msg->status = RNDIS_STATUS_SUCCESS;
+ retval = usb_control_msg(dev->udev,
+ usb_sndctrlpipe(dev->udev, 0),
+ USB_CDC_SEND_ENCAPSULATED_COMMAND,
+ USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+ 0, master_ifnum,
+ msg, sizeof *msg,
+ RNDIS_CONTROL_TIMEOUT_MS);
+ if (unlikely(retval < 0))
+ dev_dbg(&info->control->dev,
+ "rndis keepalive err %d\n",
+ retval);
+ }
+ break;
+ default:
+ dev_dbg(&info->control->dev,
+ "unexpected rndis msg %08x len %d\n",
+ le32_to_cpu(buf->msg_type), msg_len);
+ }
+ } else {
+ /* device probably issued a protocol stall; ignore */
+ dev_dbg(&info->control->dev,
+ "rndis response error, code %d\n", retval);
+ }
+ msleep(2);
+ }
+ dev_dbg(&info->control->dev, "rndis response timeout\n");
+ return -ETIMEDOUT;
+}
+
+/*
+ * rndis_query:
+ *
+ * Performs a query for @oid along with 0 or more bytes of payload as
+ * specified by @in_len. If @reply_len is not set to -1 then the reply
+ * length is checked against this value, resulting in an error if it
+ * doesn't match.
+ *
+ * NOTE: Adding a payload exactly or greater than the size of the expected
+ * response payload is an evident requirement MSFT added for ActiveSync.
+ *
+ * The only exception is for OIDs that return a variably sized response,
+ * in which case no payload should be added. This undocumented (and
+ * nonsensical!) issue was found by sniffing protocol requests from the
+ * ActiveSync 4.1 Windows driver.
+ */
+static int rndis_query(struct usbnet *dev, struct usb_interface *intf,
+ void *buf, u32 oid, u32 in_len,
+ void **reply, int *reply_len)
+{
+ int retval;
+ union {
+ void *buf;
+ struct rndis_msg_hdr *header;
+ struct rndis_query *get;
+ struct rndis_query_c *get_c;
+ } u;
+ u32 off, len;
+
+ u.buf = buf;
+
+ memset(u.get, 0, sizeof *u.get + in_len);
+ u.get->msg_type = RNDIS_MSG_QUERY;
+ u.get->msg_len = cpu_to_le32(sizeof *u.get + in_len);
+ u.get->oid = oid;
+ u.get->len = cpu_to_le32(in_len);
+ u.get->offset = ccpu2(20);
+
+ retval = rndis_command(dev, u.header);
+ if (unlikely(retval < 0)) {
+ dev_err(&intf->dev, "RNDIS_MSG_QUERY(0x%08x) failed, %d\n",
+ oid, retval);
+ return retval;
+ }
+
+ off = le32_to_cpu(u.get_c->offset);
+ len = le32_to_cpu(u.get_c->len);
+ if (unlikely((8 + off + len) > CONTROL_BUFFER_SIZE))
+ goto response_error;
+
+ if (*reply_len != -1 && len != *reply_len)
+ goto response_error;
+
+ *reply = (unsigned char *) &u.get_c->request_id + off;
+ *reply_len = len;
+
+ return retval;
+
+response_error:
+ dev_err(&intf->dev, "RNDIS_MSG_QUERY(0x%08x) "
+ "invalid response - off %d len %d\n",
+ oid, off, len);
+ return -EDOM;
+}
+
+static int rndis_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+ int retval;
+ struct net_device *net = dev->net;
+ struct cdc_state *info = (void *) &dev->data;
+ union {
+ void *buf;
+ struct rndis_msg_hdr *header;
+ struct rndis_init *init;
+ struct rndis_init_c *init_c;
+ struct rndis_query *get;
+ struct rndis_query_c *get_c;
+ struct rndis_set *set;
+ struct rndis_set_c *set_c;
+ } u;
+ u32 tmp;
+ int reply_len;
+ unsigned char *bp;
+
+ /* we can't rely on i/o from stack working, or stack allocation */
+ u.buf = kmalloc(CONTROL_BUFFER_SIZE, GFP_KERNEL);
+ if (!u.buf)
+ return -ENOMEM;
+ retval = usbnet_generic_cdc_bind(dev, intf);
+ if (retval < 0)
+ goto fail;
+
+ u.init->msg_type = RNDIS_MSG_INIT;
+ u.init->msg_len = ccpu2(sizeof *u.init);
+ u.init->major_version = ccpu2(1);
+ u.init->minor_version = ccpu2(0);
+
+ /* max transfer (in spec) is 0x4000 at full speed, but for
+ * TX we'll stick to one Ethernet packet plus RNDIS framing.
+ * For RX we handle drivers that zero-pad to end-of-packet.
+ * Don't let userspace change these settings.
+ *
+ * NOTE: there still seems to be wierdness here, as if we need
+ * to do some more things to make sure WinCE targets accept this.
+ * They default to jumbograms of 8KB or 16KB, which is absurd
+ * for such low data rates and which is also more than Linux
+ * can usually expect to allocate for SKB data...
+ */
+ net->hard_header_len += sizeof (struct rndis_data_hdr);
+ dev->hard_mtu = net->mtu + net->hard_header_len;
+
+ dev->rx_urb_size = dev->hard_mtu + (dev->maxpacket + 1);
+ dev->rx_urb_size &= ~(dev->maxpacket - 1);
+ u.init->max_transfer_size = cpu_to_le32(dev->rx_urb_size);
+
+ net->change_mtu = NULL;
+ retval = rndis_command(dev, u.header);
+ if (unlikely(retval < 0)) {
+ /* it might not even be an RNDIS device!! */
+ dev_err(&intf->dev, "RNDIS init failed, %d\n", retval);
+ goto fail_and_release;
+ }
+ tmp = le32_to_cpu(u.init_c->max_transfer_size);
+ if (tmp < dev->hard_mtu) {
+ dev_err(&intf->dev,
+ "dev can't take %u byte packets (max %u)\n",
+ dev->hard_mtu, tmp);
+ goto fail_and_release;
+ }
+
+ /* REVISIT: peripheral "alignment" request is ignored ... */
+ dev_dbg(&intf->dev,
+ "hard mtu %u (%u from dev), rx buflen %Zu, align %d\n",
+ dev->hard_mtu, tmp, dev->rx_urb_size,
+ 1 << le32_to_cpu(u.init_c->packet_alignment));
+
+ /* Get designated host ethernet address */
+ reply_len = ETH_ALEN;
+ retval = rndis_query(dev, intf, u.buf, OID_802_3_PERMANENT_ADDRESS,
+ 48, (void **) &bp, &reply_len);
+ if (unlikely(retval< 0)) {
+ dev_err(&intf->dev, "rndis get ethaddr, %d\n", retval);
+ goto fail_and_release;
+ }
+ memcpy(net->dev_addr, bp, ETH_ALEN);
+
+ /* set a nonzero filter to enable data transfers */
+ memset(u.set, 0, sizeof *u.set);
+ u.set->msg_type = RNDIS_MSG_SET;
+ u.set->msg_len = ccpu2(4 + sizeof *u.set);
+ u.set->oid = OID_GEN_CURRENT_PACKET_FILTER;
+ u.set->len = ccpu2(4);
+ u.set->offset = ccpu2((sizeof *u.set) - 8);
+ *(__le32 *)(u.buf + sizeof *u.set) = ccpu2(DEFAULT_FILTER);
+
+ retval = rndis_command(dev, u.header);
+ if (unlikely(retval < 0)) {
+ dev_err(&intf->dev, "rndis set packet filter, %d\n", retval);
+ goto fail_and_release;
+ }
+
+ retval = 0;
+
+ kfree(u.buf);
+ return retval;
+
+fail_and_release:
+ usb_set_intfdata(info->data, NULL);
+ usb_driver_release_interface(driver_of(intf), info->data);
+ info->data = NULL;
+fail:
+ kfree(u.buf);
+ return retval;
+}
+
+static void rndis_unbind(struct usbnet *dev, struct usb_interface *intf)
+{
+ struct rndis_halt *halt;
+
+ /* try to clear any rndis state/activity (no i/o from stack!) */
+ halt = kzalloc(sizeof *halt, GFP_KERNEL);
+ if (halt) {
+ halt->msg_type = RNDIS_MSG_HALT;
+ halt->msg_len = ccpu2(sizeof *halt);
+ (void) rndis_command(dev, (void *)halt);
+ kfree(halt);
+ }
+
+ return usbnet_cdc_unbind(dev, intf);
+}
+
+/*
+ * DATA -- host must not write zlps
+ */
+static int rndis_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
+{
+ /* peripheral may have batched packets to us... */
+ while (likely(skb->len)) {
+ struct rndis_data_hdr *hdr = (void *)skb->data;
+ struct sk_buff *skb2;
+ u32 msg_len, data_offset, data_len;
+
+ msg_len = le32_to_cpu(hdr->msg_len);
+ data_offset = le32_to_cpu(hdr->data_offset);
+ data_len = le32_to_cpu(hdr->data_len);
+
+ /* don't choke if we see oob, per-packet data, etc */
+ if (unlikely(hdr->msg_type != RNDIS_MSG_PACKET
+ || skb->len < msg_len
+ || (data_offset + data_len + 8) > msg_len)) {
+ dev->stats.rx_frame_errors++;
+ devdbg(dev, "bad rndis message %d/%d/%d/%d, len %d",
+ le32_to_cpu(hdr->msg_type),
+ msg_len, data_offset, data_len, skb->len);
+ return 0;
+ }
+ skb_pull(skb, 8 + data_offset);
+
+ /* at most one packet left? */
+ if (likely((data_len - skb->len) <= sizeof *hdr)) {
+ skb_trim(skb, data_len);
+ break;
+ }
+
+ /* try to return all the packets in the batch */
+ skb2 = skb_clone(skb, GFP_ATOMIC);
+ if (unlikely(!skb2))
+ break;
+ skb_pull(skb, msg_len - sizeof *hdr);
+ skb_trim(skb2, data_len);
+ usbnet_skb_return(dev, skb2);
+ }
+
+ /* caller will usbnet_skb_return the remaining packet */
+ return 1;
+}
+
+static struct sk_buff *
+rndis_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags)
+{
+ struct rndis_data_hdr *hdr;
+ struct sk_buff *skb2;
+ unsigned len = skb->len;
+
+ if (likely(!skb_cloned(skb))) {
+ int room = skb_headroom(skb);
+
+ /* enough head room as-is? */
+ if (unlikely((sizeof *hdr) <= room))
+ goto fill;
+
+ /* enough room, but needs to be readjusted? */
+ room += skb_tailroom(skb);
+ if (likely((sizeof *hdr) <= room)) {
+ skb->data = memmove(skb->head + sizeof *hdr,
+ skb->data, len);
+ skb_set_tail_pointer(skb, len);
+ goto fill;
+ }
+ }
+
+ /* create a new skb, with the correct size (and tailpad) */
+ skb2 = skb_copy_expand(skb, sizeof *hdr, 1, flags);
+ dev_kfree_skb_any(skb);
+ if (unlikely(!skb2))
+ return skb2;
+ skb = skb2;
+
+ /* fill out the RNDIS header. we won't bother trying to batch
+ * packets; Linux minimizes wasted bandwidth through tx queues.
+ */
+fill:
+ hdr = (void *) __skb_push(skb, sizeof *hdr);
+ memset(hdr, 0, sizeof *hdr);
+ hdr->msg_type = RNDIS_MSG_PACKET;
+ hdr->msg_len = cpu_to_le32(skb->len);
+ hdr->data_offset = ccpu2(sizeof(*hdr) - 8);
+ hdr->data_len = cpu_to_le32(len);
+
+ /* FIXME make the last packet always be short ... */
+ return skb;
+}
+
+
+static const struct driver_info rndis_info = {
+ .description = "RNDIS device",
+ .flags = FLAG_ETHER | FLAG_FRAMING_RN | FLAG_NO_SETINT,
+ .bind = rndis_bind,
+ .unbind = rndis_unbind,
+ .status = rndis_status,
+ .rx_fixup = rndis_rx_fixup,
+ .tx_fixup = rndis_tx_fixup,
+};
+
+#undef ccpu2
+
+
+/*-------------------------------------------------------------------------*/
+
+static const struct usb_device_id products [] = {
+{
+ /* RNDIS is MSFT's un-official variant of CDC ACM */
+ USB_INTERFACE_INFO(USB_CLASS_COMM, 2 /* ACM */, 0x0ff),
+ .driver_info = (unsigned long) &rndis_info,
+}, {
+ /* "ActiveSync" is an undocumented variant of RNDIS, used in WM5 */
+ USB_INTERFACE_INFO(USB_CLASS_MISC, 1, 1),
+ .driver_info = (unsigned long) &rndis_info,
+},
+ { }, // END
+};
+MODULE_DEVICE_TABLE(usb, products);
+
+static struct usb_driver rndis_driver = {
+ .name = "rndis_host",
+ .id_table = products,
+ .probe = usbnet_probe,
+ .disconnect = usbnet_disconnect,
+ .suspend = usbnet_suspend,
+ .resume = usbnet_resume,
+};
+
+static int __init rndis_init(void)
+{
+ return usb_register(&rndis_driver);
+}
+module_init(rndis_init);
+
+static void __exit rndis_exit(void)
+{
+ usb_deregister(&rndis_driver);
+}
+module_exit(rndis_exit);
+
+MODULE_AUTHOR("David Brownell");
+MODULE_DESCRIPTION("USB Host side RNDIS driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/usb/rtl8150.c b/drivers/net/usb/rtl8150.c
new file mode 100644
index 0000000..fa598f0
--- /dev/null
+++ b/drivers/net/usb/rtl8150.c
@@ -0,0 +1,1004 @@
+/*
+ * Copyright (c) 2002 Petko Manolov (petkan@users.sourceforge.net)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/signal.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/usb.h>
+#include <asm/uaccess.h>
+
+/* Version Information */
+#define DRIVER_VERSION "v0.6.2 (2004/08/27)"
+#define DRIVER_AUTHOR "Petko Manolov <petkan@users.sourceforge.net>"
+#define DRIVER_DESC "rtl8150 based usb-ethernet driver"
+
+#define IDR 0x0120
+#define MAR 0x0126
+#define CR 0x012e
+#define TCR 0x012f
+#define RCR 0x0130
+#define TSR 0x0132
+#define RSR 0x0133
+#define CON0 0x0135
+#define CON1 0x0136
+#define MSR 0x0137
+#define PHYADD 0x0138
+#define PHYDAT 0x0139
+#define PHYCNT 0x013b
+#define GPPC 0x013d
+#define BMCR 0x0140
+#define BMSR 0x0142
+#define ANAR 0x0144
+#define ANLP 0x0146
+#define AER 0x0148
+#define CSCR 0x014C /* This one has the link status */
+#define CSCR_LINK_STATUS (1 << 3)
+
+#define IDR_EEPROM 0x1202
+
+#define PHY_READ 0
+#define PHY_WRITE 0x20
+#define PHY_GO 0x40
+
+#define MII_TIMEOUT 10
+#define INTBUFSIZE 8
+
+#define RTL8150_REQT_READ 0xc0
+#define RTL8150_REQT_WRITE 0x40
+#define RTL8150_REQ_GET_REGS 0x05
+#define RTL8150_REQ_SET_REGS 0x05
+
+
+/* Transmit status register errors */
+#define TSR_ECOL (1<<5)
+#define TSR_LCOL (1<<4)
+#define TSR_LOSS_CRS (1<<3)
+#define TSR_JBR (1<<2)
+#define TSR_ERRORS (TSR_ECOL | TSR_LCOL | TSR_LOSS_CRS | TSR_JBR)
+/* Receive status register errors */
+#define RSR_CRC (1<<2)
+#define RSR_FAE (1<<1)
+#define RSR_ERRORS (RSR_CRC | RSR_FAE)
+
+/* Media status register definitions */
+#define MSR_DUPLEX (1<<4)
+#define MSR_SPEED (1<<3)
+#define MSR_LINK (1<<2)
+
+/* Interrupt pipe data */
+#define INT_TSR 0x00
+#define INT_RSR 0x01
+#define INT_MSR 0x02
+#define INT_WAKSR 0x03
+#define INT_TXOK_CNT 0x04
+#define INT_RXLOST_CNT 0x05
+#define INT_CRERR_CNT 0x06
+#define INT_COL_CNT 0x07
+
+/* Transmit status register errors */
+#define TSR_ECOL (1<<5)
+#define TSR_LCOL (1<<4)
+#define TSR_LOSS_CRS (1<<3)
+#define TSR_JBR (1<<2)
+#define TSR_ERRORS (TSR_ECOL | TSR_LCOL | TSR_LOSS_CRS | TSR_JBR)
+/* Receive status register errors */
+#define RSR_CRC (1<<2)
+#define RSR_FAE (1<<1)
+#define RSR_ERRORS (RSR_CRC | RSR_FAE)
+
+/* Media status register definitions */
+#define MSR_DUPLEX (1<<4)
+#define MSR_SPEED (1<<3)
+#define MSR_LINK (1<<2)
+
+/* Interrupt pipe data */
+#define INT_TSR 0x00
+#define INT_RSR 0x01
+#define INT_MSR 0x02
+#define INT_WAKSR 0x03
+#define INT_TXOK_CNT 0x04
+#define INT_RXLOST_CNT 0x05
+#define INT_CRERR_CNT 0x06
+#define INT_COL_CNT 0x07
+
+
+#define RTL8150_MTU 1540
+#define RTL8150_TX_TIMEOUT (HZ)
+#define RX_SKB_POOL_SIZE 4
+
+/* rtl8150 flags */
+#define RTL8150_HW_CRC 0
+#define RX_REG_SET 1
+#define RTL8150_UNPLUG 2
+#define RX_URB_FAIL 3
+
+/* Define these values to match your device */
+#define VENDOR_ID_REALTEK 0x0bda
+#define VENDOR_ID_MELCO 0x0411
+#define VENDOR_ID_MICRONET 0x3980
+#define VENDOR_ID_LONGSHINE 0x07b8
+#define VENDOR_ID_OQO 0x1557
+#define VENDOR_ID_ZYXEL 0x0586
+
+#define PRODUCT_ID_RTL8150 0x8150
+#define PRODUCT_ID_LUAKTX 0x0012
+#define PRODUCT_ID_LCS8138TX 0x401a
+#define PRODUCT_ID_SP128AR 0x0003
+#define PRODUCT_ID_PRESTIGE 0x401a
+
+#undef EEPROM_WRITE
+
+/* table of devices that work with this driver */
+static struct usb_device_id rtl8150_table[] = {
+ {USB_DEVICE(VENDOR_ID_REALTEK, PRODUCT_ID_RTL8150)},
+ {USB_DEVICE(VENDOR_ID_MELCO, PRODUCT_ID_LUAKTX)},
+ {USB_DEVICE(VENDOR_ID_MICRONET, PRODUCT_ID_SP128AR)},
+ {USB_DEVICE(VENDOR_ID_LONGSHINE, PRODUCT_ID_LCS8138TX)},
+ {USB_DEVICE(VENDOR_ID_OQO, PRODUCT_ID_RTL8150)},
+ {USB_DEVICE(VENDOR_ID_ZYXEL, PRODUCT_ID_PRESTIGE)},
+ {}
+};
+
+MODULE_DEVICE_TABLE(usb, rtl8150_table);
+
+struct rtl8150 {
+ unsigned long flags;
+ struct usb_device *udev;
+ struct tasklet_struct tl;
+ struct net_device_stats stats;
+ struct net_device *netdev;
+ struct urb *rx_urb, *tx_urb, *intr_urb, *ctrl_urb;
+ struct sk_buff *tx_skb, *rx_skb;
+ struct sk_buff *rx_skb_pool[RX_SKB_POOL_SIZE];
+ spinlock_t rx_pool_lock;
+ struct usb_ctrlrequest dr;
+ int intr_interval;
+ __le16 rx_creg;
+ u8 *intr_buff;
+ u8 phy;
+};
+
+typedef struct rtl8150 rtl8150_t;
+
+static void fill_skb_pool(rtl8150_t *);
+static void free_skb_pool(rtl8150_t *);
+static inline struct sk_buff *pull_skb(rtl8150_t *);
+static void rtl8150_disconnect(struct usb_interface *intf);
+static int rtl8150_probe(struct usb_interface *intf,
+ const struct usb_device_id *id);
+static int rtl8150_suspend(struct usb_interface *intf, pm_message_t message);
+static int rtl8150_resume(struct usb_interface *intf);
+
+static const char driver_name [] = "rtl8150";
+
+static struct usb_driver rtl8150_driver = {
+ .name = driver_name,
+ .probe = rtl8150_probe,
+ .disconnect = rtl8150_disconnect,
+ .id_table = rtl8150_table,
+ .suspend = rtl8150_suspend,
+ .resume = rtl8150_resume
+};
+
+/*
+**
+** device related part of the code
+**
+*/
+static int get_registers(rtl8150_t * dev, u16 indx, u16 size, void *data)
+{
+ return usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0),
+ RTL8150_REQ_GET_REGS, RTL8150_REQT_READ,
+ indx, 0, data, size, 500);
+}
+
+static int set_registers(rtl8150_t * dev, u16 indx, u16 size, void *data)
+{
+ return usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0),
+ RTL8150_REQ_SET_REGS, RTL8150_REQT_WRITE,
+ indx, 0, data, size, 500);
+}
+
+static void ctrl_callback(struct urb *urb)
+{
+ rtl8150_t *dev;
+
+ switch (urb->status) {
+ case 0:
+ break;
+ case -EINPROGRESS:
+ break;
+ case -ENOENT:
+ break;
+ default:
+ warn("ctrl urb status %d", urb->status);
+ }
+ dev = urb->context;
+ clear_bit(RX_REG_SET, &dev->flags);
+}
+
+static int async_set_registers(rtl8150_t * dev, u16 indx, u16 size)
+{
+ int ret;
+
+ if (test_bit(RX_REG_SET, &dev->flags))
+ return -EAGAIN;
+
+ dev->dr.bRequestType = RTL8150_REQT_WRITE;
+ dev->dr.bRequest = RTL8150_REQ_SET_REGS;
+ dev->dr.wValue = cpu_to_le16(indx);
+ dev->dr.wIndex = 0;
+ dev->dr.wLength = cpu_to_le16(size);
+ dev->ctrl_urb->transfer_buffer_length = size;
+ usb_fill_control_urb(dev->ctrl_urb, dev->udev,
+ usb_sndctrlpipe(dev->udev, 0), (char *) &dev->dr,
+ &dev->rx_creg, size, ctrl_callback, dev);
+ if ((ret = usb_submit_urb(dev->ctrl_urb, GFP_ATOMIC))) {
+ if (ret == -ENODEV)
+ netif_device_detach(dev->netdev);
+ err("control request submission failed: %d", ret);
+ } else
+ set_bit(RX_REG_SET, &dev->flags);
+
+ return ret;
+}
+
+static int read_mii_word(rtl8150_t * dev, u8 phy, __u8 indx, u16 * reg)
+{
+ int i;
+ u8 data[3], tmp;
+
+ data[0] = phy;
+ data[1] = data[2] = 0;
+ tmp = indx | PHY_READ | PHY_GO;
+ i = 0;
+
+ set_registers(dev, PHYADD, sizeof(data), data);
+ set_registers(dev, PHYCNT, 1, &tmp);
+ do {
+ get_registers(dev, PHYCNT, 1, data);
+ } while ((data[0] & PHY_GO) && (i++ < MII_TIMEOUT));
+
+ if (i < MII_TIMEOUT) {
+ get_registers(dev, PHYDAT, 2, data);
+ *reg = data[0] | (data[1] << 8);
+ return 0;
+ } else
+ return 1;
+}
+
+static int write_mii_word(rtl8150_t * dev, u8 phy, __u8 indx, u16 reg)
+{
+ int i;
+ u8 data[3], tmp;
+
+ data[0] = phy;
+ data[1] = reg & 0xff;
+ data[2] = (reg >> 8) & 0xff;
+ tmp = indx | PHY_WRITE | PHY_GO;
+ i = 0;
+
+ set_registers(dev, PHYADD, sizeof(data), data);
+ set_registers(dev, PHYCNT, 1, &tmp);
+ do {
+ get_registers(dev, PHYCNT, 1, data);
+ } while ((data[0] & PHY_GO) && (i++ < MII_TIMEOUT));
+
+ if (i < MII_TIMEOUT)
+ return 0;
+ else
+ return 1;
+}
+
+static inline void set_ethernet_addr(rtl8150_t * dev)
+{
+ u8 node_id[6];
+
+ get_registers(dev, IDR, sizeof(node_id), node_id);
+ memcpy(dev->netdev->dev_addr, node_id, sizeof(node_id));
+}
+
+static int rtl8150_set_mac_address(struct net_device *netdev, void *p)
+{
+ struct sockaddr *addr = p;
+ rtl8150_t *dev = netdev_priv(netdev);
+ int i;
+
+ if (netif_running(netdev))
+ return -EBUSY;
+
+ memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
+ dbg("%s: Setting MAC address to ", netdev->name);
+ for (i = 0; i < 5; i++)
+ dbg("%02X:", netdev->dev_addr[i]);
+ dbg("%02X\n", netdev->dev_addr[i]);
+ /* Set the IDR registers. */
+ set_registers(dev, IDR, sizeof(netdev->dev_addr), netdev->dev_addr);
+#ifdef EEPROM_WRITE
+ {
+ u8 cr;
+ /* Get the CR contents. */
+ get_registers(dev, CR, 1, &cr);
+ /* Set the WEPROM bit (eeprom write enable). */
+ cr |= 0x20;
+ set_registers(dev, CR, 1, &cr);
+ /* Write the MAC address into eeprom. Eeprom writes must be word-sized,
+ so we need to split them up. */
+ for (i = 0; i * 2 < netdev->addr_len; i++) {
+ set_registers(dev, IDR_EEPROM + (i * 2), 2,
+ netdev->dev_addr + (i * 2));
+ }
+ /* Clear the WEPROM bit (preventing accidental eeprom writes). */
+ cr &= 0xdf;
+ set_registers(dev, CR, 1, &cr);
+ }
+#endif
+ return 0;
+}
+
+static int rtl8150_reset(rtl8150_t * dev)
+{
+ u8 data = 0x10;
+ int i = HZ;
+
+ set_registers(dev, CR, 1, &data);
+ do {
+ get_registers(dev, CR, 1, &data);
+ } while ((data & 0x10) && --i);
+
+ return (i > 0) ? 1 : 0;
+}
+
+static int alloc_all_urbs(rtl8150_t * dev)
+{
+ dev->rx_urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!dev->rx_urb)
+ return 0;
+ dev->tx_urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!dev->tx_urb) {
+ usb_free_urb(dev->rx_urb);
+ return 0;
+ }
+ dev->intr_urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!dev->intr_urb) {
+ usb_free_urb(dev->rx_urb);
+ usb_free_urb(dev->tx_urb);
+ return 0;
+ }
+ dev->ctrl_urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!dev->intr_urb) {
+ usb_free_urb(dev->rx_urb);
+ usb_free_urb(dev->tx_urb);
+ usb_free_urb(dev->intr_urb);
+ return 0;
+ }
+
+ return 1;
+}
+
+static void free_all_urbs(rtl8150_t * dev)
+{
+ usb_free_urb(dev->rx_urb);
+ usb_free_urb(dev->tx_urb);
+ usb_free_urb(dev->intr_urb);
+ usb_free_urb(dev->ctrl_urb);
+}
+
+static void unlink_all_urbs(rtl8150_t * dev)
+{
+ usb_kill_urb(dev->rx_urb);
+ usb_kill_urb(dev->tx_urb);
+ usb_kill_urb(dev->intr_urb);
+ usb_kill_urb(dev->ctrl_urb);
+}
+
+static inline struct sk_buff *pull_skb(rtl8150_t *dev)
+{
+ struct sk_buff *skb;
+ int i;
+
+ for (i = 0; i < RX_SKB_POOL_SIZE; i++) {
+ if (dev->rx_skb_pool[i]) {
+ skb = dev->rx_skb_pool[i];
+ dev->rx_skb_pool[i] = NULL;
+ return skb;
+ }
+ }
+ return NULL;
+}
+
+static void read_bulk_callback(struct urb *urb)
+{
+ rtl8150_t *dev;
+ unsigned pkt_len, res;
+ struct sk_buff *skb;
+ struct net_device *netdev;
+ u16 rx_stat;
+ int status;
+
+ dev = urb->context;
+ if (!dev)
+ return;
+ if (test_bit(RTL8150_UNPLUG, &dev->flags))
+ return;
+ netdev = dev->netdev;
+ if (!netif_device_present(netdev))
+ return;
+
+ switch (urb->status) {
+ case 0:
+ break;
+ case -ENOENT:
+ return; /* the urb is in unlink state */
+ case -ETIME:
+ warn("may be reset is needed?..");
+ goto goon;
+ default:
+ warn("Rx status %d", urb->status);
+ goto goon;
+ }
+
+ if (!dev->rx_skb)
+ goto resched;
+ /* protect against short packets (tell me why we got some?!?) */
+ if (urb->actual_length < 4)
+ goto goon;
+
+ res = urb->actual_length;
+ rx_stat = le16_to_cpu(*(__le16 *)(urb->transfer_buffer + res - 4));
+ pkt_len = res - 4;
+
+ skb_put(dev->rx_skb, pkt_len);
+ dev->rx_skb->protocol = eth_type_trans(dev->rx_skb, netdev);
+ netif_rx(dev->rx_skb);
+ dev->stats.rx_packets++;
+ dev->stats.rx_bytes += pkt_len;
+
+ spin_lock(&dev->rx_pool_lock);
+ skb = pull_skb(dev);
+ spin_unlock(&dev->rx_pool_lock);
+ if (!skb)
+ goto resched;
+
+ dev->rx_skb = skb;
+goon:
+ usb_fill_bulk_urb(dev->rx_urb, dev->udev, usb_rcvbulkpipe(dev->udev, 1),
+ dev->rx_skb->data, RTL8150_MTU, read_bulk_callback, dev);
+ status = usb_submit_urb(dev->rx_urb, GFP_ATOMIC);
+ if (status == -ENODEV)
+ netif_device_detach(dev->netdev);
+ else if (status) {
+ set_bit(RX_URB_FAIL, &dev->flags);
+ goto resched;
+ } else {
+ clear_bit(RX_URB_FAIL, &dev->flags);
+ }
+
+ return;
+resched:
+ tasklet_schedule(&dev->tl);
+}
+
+static void rx_fixup(unsigned long data)
+{
+ rtl8150_t *dev;
+ struct sk_buff *skb;
+ int status;
+
+ dev = (rtl8150_t *)data;
+
+ spin_lock_irq(&dev->rx_pool_lock);
+ fill_skb_pool(dev);
+ spin_unlock_irq(&dev->rx_pool_lock);
+ if (test_bit(RX_URB_FAIL, &dev->flags))
+ if (dev->rx_skb)
+ goto try_again;
+ spin_lock_irq(&dev->rx_pool_lock);
+ skb = pull_skb(dev);
+ spin_unlock_irq(&dev->rx_pool_lock);
+ if (skb == NULL)
+ goto tlsched;
+ dev->rx_skb = skb;
+ usb_fill_bulk_urb(dev->rx_urb, dev->udev, usb_rcvbulkpipe(dev->udev, 1),
+ dev->rx_skb->data, RTL8150_MTU, read_bulk_callback, dev);
+try_again:
+ status = usb_submit_urb(dev->rx_urb, GFP_ATOMIC);
+ if (status == -ENODEV) {
+ netif_device_detach(dev->netdev);
+ } else if (status) {
+ set_bit(RX_URB_FAIL, &dev->flags);
+ goto tlsched;
+ } else {
+ clear_bit(RX_URB_FAIL, &dev->flags);
+ }
+
+ return;
+tlsched:
+ tasklet_schedule(&dev->tl);
+}
+
+static void write_bulk_callback(struct urb *urb)
+{
+ rtl8150_t *dev;
+
+ dev = urb->context;
+ if (!dev)
+ return;
+ dev_kfree_skb_irq(dev->tx_skb);
+ if (!netif_device_present(dev->netdev))
+ return;
+ if (urb->status)
+ info("%s: Tx status %d", dev->netdev->name, urb->status);
+ dev->netdev->trans_start = jiffies;
+ netif_wake_queue(dev->netdev);
+}
+
+static void intr_callback(struct urb *urb)
+{
+ rtl8150_t *dev;
+ __u8 *d;
+ int status;
+
+ dev = urb->context;
+ if (!dev)
+ return;
+ switch (urb->status) {
+ case 0: /* success */
+ break;
+ case -ECONNRESET: /* unlink */
+ case -ENOENT:
+ case -ESHUTDOWN:
+ return;
+ /* -EPIPE: should clear the halt */
+ default:
+ info("%s: intr status %d", dev->netdev->name, urb->status);
+ goto resubmit;
+ }
+
+ d = urb->transfer_buffer;
+ if (d[0] & TSR_ERRORS) {
+ dev->stats.tx_errors++;
+ if (d[INT_TSR] & (TSR_ECOL | TSR_JBR))
+ dev->stats.tx_aborted_errors++;
+ if (d[INT_TSR] & TSR_LCOL)
+ dev->stats.tx_window_errors++;
+ if (d[INT_TSR] & TSR_LOSS_CRS)
+ dev->stats.tx_carrier_errors++;
+ }
+ /* Report link status changes to the network stack */
+ if ((d[INT_MSR] & MSR_LINK) == 0) {
+ if (netif_carrier_ok(dev->netdev)) {
+ netif_carrier_off(dev->netdev);
+ dbg("%s: LINK LOST\n", __func__);
+ }
+ } else {
+ if (!netif_carrier_ok(dev->netdev)) {
+ netif_carrier_on(dev->netdev);
+ dbg("%s: LINK CAME BACK\n", __func__);
+ }
+ }
+
+resubmit:
+ status = usb_submit_urb (urb, GFP_ATOMIC);
+ if (status == -ENODEV)
+ netif_device_detach(dev->netdev);
+ else if (status)
+ err ("can't resubmit intr, %s-%s/input0, status %d",
+ dev->udev->bus->bus_name,
+ dev->udev->devpath, status);
+}
+
+static int rtl8150_suspend(struct usb_interface *intf, pm_message_t message)
+{
+ rtl8150_t *dev = usb_get_intfdata(intf);
+
+ netif_device_detach(dev->netdev);
+
+ if (netif_running(dev->netdev)) {
+ usb_kill_urb(dev->rx_urb);
+ usb_kill_urb(dev->intr_urb);
+ }
+ return 0;
+}
+
+static int rtl8150_resume(struct usb_interface *intf)
+{
+ rtl8150_t *dev = usb_get_intfdata(intf);
+
+ netif_device_attach(dev->netdev);
+ if (netif_running(dev->netdev)) {
+ dev->rx_urb->status = 0;
+ dev->rx_urb->actual_length = 0;
+ read_bulk_callback(dev->rx_urb);
+
+ dev->intr_urb->status = 0;
+ dev->intr_urb->actual_length = 0;
+ intr_callback(dev->intr_urb);
+ }
+ return 0;
+}
+
+/*
+**
+** network related part of the code
+**
+*/
+
+static void fill_skb_pool(rtl8150_t *dev)
+{
+ struct sk_buff *skb;
+ int i;
+
+ for (i = 0; i < RX_SKB_POOL_SIZE; i++) {
+ if (dev->rx_skb_pool[i])
+ continue;
+ skb = dev_alloc_skb(RTL8150_MTU + 2);
+ if (!skb) {
+ return;
+ }
+ skb_reserve(skb, 2);
+ dev->rx_skb_pool[i] = skb;
+ }
+}
+
+static void free_skb_pool(rtl8150_t *dev)
+{
+ int i;
+
+ for (i = 0; i < RX_SKB_POOL_SIZE; i++)
+ if (dev->rx_skb_pool[i])
+ dev_kfree_skb(dev->rx_skb_pool[i]);
+}
+
+static int enable_net_traffic(rtl8150_t * dev)
+{
+ u8 cr, tcr, rcr, msr;
+
+ if (!rtl8150_reset(dev)) {
+ warn("%s - device reset failed", __FUNCTION__);
+ }
+ /* RCR bit7=1 attach Rx info at the end; =0 HW CRC (which is broken) */
+ rcr = 0x9e;
+ dev->rx_creg = cpu_to_le16(rcr);
+ tcr = 0xd8;
+ cr = 0x0c;
+ if (!(rcr & 0x80))
+ set_bit(RTL8150_HW_CRC, &dev->flags);
+ set_registers(dev, RCR, 1, &rcr);
+ set_registers(dev, TCR, 1, &tcr);
+ set_registers(dev, CR, 1, &cr);
+ get_registers(dev, MSR, 1, &msr);
+
+ return 0;
+}
+
+static void disable_net_traffic(rtl8150_t * dev)
+{
+ u8 cr;
+
+ get_registers(dev, CR, 1, &cr);
+ cr &= 0xf3;
+ set_registers(dev, CR, 1, &cr);
+}
+
+static struct net_device_stats *rtl8150_netdev_stats(struct net_device *dev)
+{
+ return &((rtl8150_t *)netdev_priv(dev))->stats;
+}
+
+static void rtl8150_tx_timeout(struct net_device *netdev)
+{
+ rtl8150_t *dev = netdev_priv(netdev);
+ warn("%s: Tx timeout.", netdev->name);
+ usb_unlink_urb(dev->tx_urb);
+ dev->stats.tx_errors++;
+}
+
+static void rtl8150_set_multicast(struct net_device *netdev)
+{
+ rtl8150_t *dev = netdev_priv(netdev);
+ netif_stop_queue(netdev);
+ if (netdev->flags & IFF_PROMISC) {
+ dev->rx_creg |= cpu_to_le16(0x0001);
+ info("%s: promiscuous mode", netdev->name);
+ } else if (netdev->mc_count ||
+ (netdev->flags & IFF_ALLMULTI)) {
+ dev->rx_creg &= cpu_to_le16(0xfffe);
+ dev->rx_creg |= cpu_to_le16(0x0002);
+ info("%s: allmulti set", netdev->name);
+ } else {
+ /* ~RX_MULTICAST, ~RX_PROMISCUOUS */
+ dev->rx_creg &= cpu_to_le16(0x00fc);
+ }
+ async_set_registers(dev, RCR, 2);
+ netif_wake_queue(netdev);
+}
+
+static int rtl8150_start_xmit(struct sk_buff *skb, struct net_device *netdev)
+{
+ rtl8150_t *dev = netdev_priv(netdev);
+ int count, res;
+
+ netif_stop_queue(netdev);
+ count = (skb->len < 60) ? 60 : skb->len;
+ count = (count & 0x3f) ? count : count + 1;
+ dev->tx_skb = skb;
+ usb_fill_bulk_urb(dev->tx_urb, dev->udev, usb_sndbulkpipe(dev->udev, 2),
+ skb->data, count, write_bulk_callback, dev);
+ if ((res = usb_submit_urb(dev->tx_urb, GFP_ATOMIC))) {
+ /* Can we get/handle EPIPE here? */
+ if (res == -ENODEV)
+ netif_device_detach(dev->netdev);
+ else {
+ warn("failed tx_urb %d\n", res);
+ dev->stats.tx_errors++;
+ netif_start_queue(netdev);
+ }
+ } else {
+ dev->stats.tx_packets++;
+ dev->stats.tx_bytes += skb->len;
+ netdev->trans_start = jiffies;
+ }
+
+ return 0;
+}
+
+
+static void set_carrier(struct net_device *netdev)
+{
+ rtl8150_t *dev = netdev_priv(netdev);
+ short tmp;
+
+ get_registers(dev, CSCR, 2, &tmp);
+ if (tmp & CSCR_LINK_STATUS)
+ netif_carrier_on(netdev);
+ else
+ netif_carrier_off(netdev);
+}
+
+static int rtl8150_open(struct net_device *netdev)
+{
+ rtl8150_t *dev = netdev_priv(netdev);
+ int res;
+
+ if (dev->rx_skb == NULL)
+ dev->rx_skb = pull_skb(dev);
+ if (!dev->rx_skb)
+ return -ENOMEM;
+
+ set_registers(dev, IDR, 6, netdev->dev_addr);
+
+ usb_fill_bulk_urb(dev->rx_urb, dev->udev, usb_rcvbulkpipe(dev->udev, 1),
+ dev->rx_skb->data, RTL8150_MTU, read_bulk_callback, dev);
+ if ((res = usb_submit_urb(dev->rx_urb, GFP_KERNEL))) {
+ if (res == -ENODEV)
+ netif_device_detach(dev->netdev);
+ warn("%s: rx_urb submit failed: %d", __FUNCTION__, res);
+ return res;
+ }
+ usb_fill_int_urb(dev->intr_urb, dev->udev, usb_rcvintpipe(dev->udev, 3),
+ dev->intr_buff, INTBUFSIZE, intr_callback,
+ dev, dev->intr_interval);
+ if ((res = usb_submit_urb(dev->intr_urb, GFP_KERNEL))) {
+ if (res == -ENODEV)
+ netif_device_detach(dev->netdev);
+ warn("%s: intr_urb submit failed: %d", __FUNCTION__, res);
+ usb_kill_urb(dev->rx_urb);
+ return res;
+ }
+ enable_net_traffic(dev);
+ set_carrier(netdev);
+ netif_start_queue(netdev);
+
+ return res;
+}
+
+static int rtl8150_close(struct net_device *netdev)
+{
+ rtl8150_t *dev = netdev_priv(netdev);
+ int res = 0;
+
+ netif_stop_queue(netdev);
+ if (!test_bit(RTL8150_UNPLUG, &dev->flags))
+ disable_net_traffic(dev);
+ unlink_all_urbs(dev);
+
+ return res;
+}
+
+static void rtl8150_get_drvinfo(struct net_device *netdev, struct ethtool_drvinfo *info)
+{
+ rtl8150_t *dev = netdev_priv(netdev);
+
+ strncpy(info->driver, driver_name, ETHTOOL_BUSINFO_LEN);
+ strncpy(info->version, DRIVER_VERSION, ETHTOOL_BUSINFO_LEN);
+ usb_make_path(dev->udev, info->bus_info, sizeof info->bus_info);
+}
+
+static int rtl8150_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
+{
+ rtl8150_t *dev = netdev_priv(netdev);
+ short lpa, bmcr;
+
+ ecmd->supported = (SUPPORTED_10baseT_Half |
+ SUPPORTED_10baseT_Full |
+ SUPPORTED_100baseT_Half |
+ SUPPORTED_100baseT_Full |
+ SUPPORTED_Autoneg |
+ SUPPORTED_TP | SUPPORTED_MII);
+ ecmd->port = PORT_TP;
+ ecmd->transceiver = XCVR_INTERNAL;
+ ecmd->phy_address = dev->phy;
+ get_registers(dev, BMCR, 2, &bmcr);
+ get_registers(dev, ANLP, 2, &lpa);
+ if (bmcr & BMCR_ANENABLE) {
+ ecmd->autoneg = AUTONEG_ENABLE;
+ ecmd->speed = (lpa & (LPA_100HALF | LPA_100FULL)) ?
+ SPEED_100 : SPEED_10;
+ if (ecmd->speed == SPEED_100)
+ ecmd->duplex = (lpa & LPA_100FULL) ?
+ DUPLEX_FULL : DUPLEX_HALF;
+ else
+ ecmd->duplex = (lpa & LPA_10FULL) ?
+ DUPLEX_FULL : DUPLEX_HALF;
+ } else {
+ ecmd->autoneg = AUTONEG_DISABLE;
+ ecmd->speed = (bmcr & BMCR_SPEED100) ?
+ SPEED_100 : SPEED_10;
+ ecmd->duplex = (bmcr & BMCR_FULLDPLX) ?
+ DUPLEX_FULL : DUPLEX_HALF;
+ }
+ return 0;
+}
+
+static struct ethtool_ops ops = {
+ .get_drvinfo = rtl8150_get_drvinfo,
+ .get_settings = rtl8150_get_settings,
+ .get_link = ethtool_op_get_link
+};
+
+static int rtl8150_ioctl(struct net_device *netdev, struct ifreq *rq, int cmd)
+{
+ rtl8150_t *dev = netdev_priv(netdev);
+ u16 *data = (u16 *) & rq->ifr_ifru;
+ int res = 0;
+
+ switch (cmd) {
+ case SIOCDEVPRIVATE:
+ data[0] = dev->phy;
+ case SIOCDEVPRIVATE + 1:
+ read_mii_word(dev, dev->phy, (data[1] & 0x1f), &data[3]);
+ break;
+ case SIOCDEVPRIVATE + 2:
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+ write_mii_word(dev, dev->phy, (data[1] & 0x1f), data[2]);
+ break;
+ default:
+ res = -EOPNOTSUPP;
+ }
+
+ return res;
+}
+
+static int rtl8150_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ struct usb_device *udev = interface_to_usbdev(intf);
+ rtl8150_t *dev;
+ struct net_device *netdev;
+
+ netdev = alloc_etherdev(sizeof(rtl8150_t));
+ if (!netdev) {
+ err("Out of memory");
+ return -ENOMEM;
+ }
+
+ dev = netdev_priv(netdev);
+ memset(dev, 0, sizeof(rtl8150_t));
+
+ dev->intr_buff = kmalloc(INTBUFSIZE, GFP_KERNEL);
+ if (!dev->intr_buff) {
+ free_netdev(netdev);
+ return -ENOMEM;
+ }
+
+ tasklet_init(&dev->tl, rx_fixup, (unsigned long)dev);
+ spin_lock_init(&dev->rx_pool_lock);
+
+ dev->udev = udev;
+ dev->netdev = netdev;
+ SET_MODULE_OWNER(netdev);
+ netdev->open = rtl8150_open;
+ netdev->stop = rtl8150_close;
+ netdev->do_ioctl = rtl8150_ioctl;
+ netdev->watchdog_timeo = RTL8150_TX_TIMEOUT;
+ netdev->tx_timeout = rtl8150_tx_timeout;
+ netdev->hard_start_xmit = rtl8150_start_xmit;
+ netdev->set_multicast_list = rtl8150_set_multicast;
+ netdev->set_mac_address = rtl8150_set_mac_address;
+ netdev->get_stats = rtl8150_netdev_stats;
+ netdev->mtu = RTL8150_MTU;
+ SET_ETHTOOL_OPS(netdev, &ops);
+ dev->intr_interval = 100; /* 100ms */
+
+ if (!alloc_all_urbs(dev)) {
+ err("out of memory");
+ goto out;
+ }
+ if (!rtl8150_reset(dev)) {
+ err("couldn't reset the device");
+ goto out1;
+ }
+ fill_skb_pool(dev);
+ set_ethernet_addr(dev);
+
+ usb_set_intfdata(intf, dev);
+ SET_NETDEV_DEV(netdev, &intf->dev);
+ if (register_netdev(netdev) != 0) {
+ err("couldn't register the device");
+ goto out2;
+ }
+
+ info("%s: rtl8150 is detected", netdev->name);
+
+ return 0;
+
+out2:
+ usb_set_intfdata(intf, NULL);
+ free_skb_pool(dev);
+out1:
+ free_all_urbs(dev);
+out:
+ kfree(dev->intr_buff);
+ free_netdev(netdev);
+ return -EIO;
+}
+
+static void rtl8150_disconnect(struct usb_interface *intf)
+{
+ rtl8150_t *dev = usb_get_intfdata(intf);
+
+ usb_set_intfdata(intf, NULL);
+ if (dev) {
+ set_bit(RTL8150_UNPLUG, &dev->flags);
+ tasklet_disable(&dev->tl);
+ tasklet_kill(&dev->tl);
+ unregister_netdev(dev->netdev);
+ unlink_all_urbs(dev);
+ free_all_urbs(dev);
+ free_skb_pool(dev);
+ if (dev->rx_skb)
+ dev_kfree_skb(dev->rx_skb);
+ kfree(dev->intr_buff);
+ free_netdev(dev->netdev);
+ }
+}
+
+static int __init usb_rtl8150_init(void)
+{
+ info(DRIVER_DESC " " DRIVER_VERSION);
+ return usb_register(&rtl8150_driver);
+}
+
+static void __exit usb_rtl8150_exit(void)
+{
+ usb_deregister(&rtl8150_driver);
+}
+
+module_init(usb_rtl8150_init);
+module_exit(usb_rtl8150_exit);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c
new file mode 100644
index 0000000..f9cd42d
--- /dev/null
+++ b/drivers/net/usb/usbnet.c
@@ -0,0 +1,1304 @@
+/*
+ * USB Network driver infrastructure
+ * Copyright (C) 2000-2005 by David Brownell
+ * Copyright (C) 2003-2005 David Hollis <dhollis@davehollis.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+/*
+ * This is a generic "USB networking" framework that works with several
+ * kinds of full and high speed networking devices: host-to-host cables,
+ * smart usb peripherals, and actual Ethernet adapters.
+ *
+ * These devices usually differ in terms of control protocols (if they
+ * even have one!) and sometimes they define new framing to wrap or batch
+ * Ethernet packets. Otherwise, they talk to USB pretty much the same,
+ * so interface (un)binding, endpoint I/O queues, fault handling, and other
+ * issues can usefully be addressed by this framework.
+ */
+
+// #define DEBUG // error path messages, extra info
+// #define VERBOSE // more; success messages
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/workqueue.h>
+#include <linux/mii.h>
+#include <linux/usb.h>
+
+#include "usbnet.h"
+
+#define DRIVER_VERSION "22-Aug-2005"
+
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * Nineteen USB 1.1 max size bulk transactions per frame (ms), max.
+ * Several dozen bytes of IPv4 data can fit in two such transactions.
+ * One maximum size Ethernet packet takes twenty four of them.
+ * For high speed, each frame comfortably fits almost 36 max size
+ * Ethernet packets (so queues should be bigger).
+ *
+ * REVISIT qlens should be members of 'struct usbnet'; the goal is to
+ * let the USB host controller be busy for 5msec or more before an irq
+ * is required, under load. Jumbograms change the equation.
+ */
+#define RX_MAX_QUEUE_MEMORY (60 * 1518)
+#define RX_QLEN(dev) (((dev)->udev->speed == USB_SPEED_HIGH) ? \
+ (RX_MAX_QUEUE_MEMORY/(dev)->rx_urb_size) : 4)
+#define TX_QLEN(dev) (((dev)->udev->speed == USB_SPEED_HIGH) ? \
+ (RX_MAX_QUEUE_MEMORY/(dev)->hard_mtu) : 4)
+
+// reawaken network queue this soon after stopping; else watchdog barks
+#define TX_TIMEOUT_JIFFIES (5*HZ)
+
+// throttle rx/tx briefly after some faults, so khubd might disconnect()
+// us (it polls at HZ/4 usually) before we report too many false errors.
+#define THROTTLE_JIFFIES (HZ/8)
+
+// between wakeups
+#define UNLINK_TIMEOUT_MS 3
+
+/*-------------------------------------------------------------------------*/
+
+// randomly generated ethernet address
+static u8 node_id [ETH_ALEN];
+
+static const char driver_name [] = "usbnet";
+
+/* use ethtool to change the level for any given device */
+static int msg_level = -1;
+module_param (msg_level, int, 0);
+MODULE_PARM_DESC (msg_level, "Override default message level");
+
+/*-------------------------------------------------------------------------*/
+
+/* handles CDC Ethernet and many other network "bulk data" interfaces */
+int usbnet_get_endpoints(struct usbnet *dev, struct usb_interface *intf)
+{
+ int tmp;
+ struct usb_host_interface *alt = NULL;
+ struct usb_host_endpoint *in = NULL, *out = NULL;
+ struct usb_host_endpoint *status = NULL;
+
+ for (tmp = 0; tmp < intf->num_altsetting; tmp++) {
+ unsigned ep;
+
+ in = out = status = NULL;
+ alt = intf->altsetting + tmp;
+
+ /* take the first altsetting with in-bulk + out-bulk;
+ * remember any status endpoint, just in case;
+ * ignore other endpoints and altsetttings.
+ */
+ for (ep = 0; ep < alt->desc.bNumEndpoints; ep++) {
+ struct usb_host_endpoint *e;
+ int intr = 0;
+
+ e = alt->endpoint + ep;
+ switch (e->desc.bmAttributes) {
+ case USB_ENDPOINT_XFER_INT:
+ if (!usb_endpoint_dir_in(&e->desc))
+ continue;
+ intr = 1;
+ /* FALLTHROUGH */
+ case USB_ENDPOINT_XFER_BULK:
+ break;
+ default:
+ continue;
+ }
+ if (usb_endpoint_dir_in(&e->desc)) {
+ if (!intr && !in)
+ in = e;
+ else if (intr && !status)
+ status = e;
+ } else {
+ if (!out)
+ out = e;
+ }
+ }
+ if (in && out)
+ break;
+ }
+ if (!alt || !in || !out)
+ return -EINVAL;
+
+ if (alt->desc.bAlternateSetting != 0
+ || !(dev->driver_info->flags & FLAG_NO_SETINT)) {
+ tmp = usb_set_interface (dev->udev, alt->desc.bInterfaceNumber,
+ alt->desc.bAlternateSetting);
+ if (tmp < 0)
+ return tmp;
+ }
+
+ dev->in = usb_rcvbulkpipe (dev->udev,
+ in->desc.bEndpointAddress & USB_ENDPOINT_NUMBER_MASK);
+ dev->out = usb_sndbulkpipe (dev->udev,
+ out->desc.bEndpointAddress & USB_ENDPOINT_NUMBER_MASK);
+ dev->status = status;
+ return 0;
+}
+EXPORT_SYMBOL_GPL(usbnet_get_endpoints);
+
+static void intr_complete (struct urb *urb);
+
+static int init_status (struct usbnet *dev, struct usb_interface *intf)
+{
+ char *buf = NULL;
+ unsigned pipe = 0;
+ unsigned maxp;
+ unsigned period;
+
+ if (!dev->driver_info->status)
+ return 0;
+
+ pipe = usb_rcvintpipe (dev->udev,
+ dev->status->desc.bEndpointAddress
+ & USB_ENDPOINT_NUMBER_MASK);
+ maxp = usb_maxpacket (dev->udev, pipe, 0);
+
+ /* avoid 1 msec chatter: min 8 msec poll rate */
+ period = max ((int) dev->status->desc.bInterval,
+ (dev->udev->speed == USB_SPEED_HIGH) ? 7 : 3);
+
+ buf = kmalloc (maxp, GFP_KERNEL);
+ if (buf) {
+ dev->interrupt = usb_alloc_urb (0, GFP_KERNEL);
+ if (!dev->interrupt) {
+ kfree (buf);
+ return -ENOMEM;
+ } else {
+ usb_fill_int_urb(dev->interrupt, dev->udev, pipe,
+ buf, maxp, intr_complete, dev, period);
+ dev_dbg(&intf->dev,
+ "status ep%din, %d bytes period %d\n",
+ usb_pipeendpoint(pipe), maxp, period);
+ }
+ }
+ return 0;
+}
+
+/* Passes this packet up the stack, updating its accounting.
+ * Some link protocols batch packets, so their rx_fixup paths
+ * can return clones as well as just modify the original skb.
+ */
+void usbnet_skb_return (struct usbnet *dev, struct sk_buff *skb)
+{
+ int status;
+
+ skb->protocol = eth_type_trans (skb, dev->net);
+ dev->stats.rx_packets++;
+ dev->stats.rx_bytes += skb->len;
+
+ if (netif_msg_rx_status (dev))
+ devdbg (dev, "< rx, len %zu, type 0x%x",
+ skb->len + sizeof (struct ethhdr), skb->protocol);
+ memset (skb->cb, 0, sizeof (struct skb_data));
+ status = netif_rx (skb);
+ if (status != NET_RX_SUCCESS && netif_msg_rx_err (dev))
+ devdbg (dev, "netif_rx status %d", status);
+}
+EXPORT_SYMBOL_GPL(usbnet_skb_return);
+
+
+/*-------------------------------------------------------------------------
+ *
+ * Network Device Driver (peer link to "Host Device", from USB host)
+ *
+ *-------------------------------------------------------------------------*/
+
+static int usbnet_change_mtu (struct net_device *net, int new_mtu)
+{
+ struct usbnet *dev = netdev_priv(net);
+ int ll_mtu = new_mtu + net->hard_header_len;
+ int old_hard_mtu = dev->hard_mtu;
+ int old_rx_urb_size = dev->rx_urb_size;
+
+ if (new_mtu <= 0)
+ return -EINVAL;
+ // no second zero-length packet read wanted after mtu-sized packets
+ if ((ll_mtu % dev->maxpacket) == 0)
+ return -EDOM;
+ net->mtu = new_mtu;
+
+ dev->hard_mtu = net->mtu + net->hard_header_len;
+ if (dev->rx_urb_size == old_hard_mtu) {
+ dev->rx_urb_size = dev->hard_mtu;
+ if (dev->rx_urb_size > old_rx_urb_size)
+ usbnet_unlink_rx_urbs(dev);
+ }
+
+ return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static struct net_device_stats *usbnet_get_stats (struct net_device *net)
+{
+ struct usbnet *dev = netdev_priv(net);
+ return &dev->stats;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* some LK 2.4 HCDs oopsed if we freed or resubmitted urbs from
+ * completion callbacks. 2.5 should have fixed those bugs...
+ */
+
+static void defer_bh(struct usbnet *dev, struct sk_buff *skb, struct sk_buff_head *list)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&list->lock, flags);
+ __skb_unlink(skb, list);
+ spin_unlock(&list->lock);
+ spin_lock(&dev->done.lock);
+ __skb_queue_tail(&dev->done, skb);
+ if (dev->done.qlen == 1)
+ tasklet_schedule(&dev->bh);
+ spin_unlock_irqrestore(&dev->done.lock, flags);
+}
+
+/* some work can't be done in tasklets, so we use keventd
+ *
+ * NOTE: annoying asymmetry: if it's active, schedule_work() fails,
+ * but tasklet_schedule() doesn't. hope the failure is rare.
+ */
+void usbnet_defer_kevent (struct usbnet *dev, int work)
+{
+ set_bit (work, &dev->flags);
+ if (!schedule_work (&dev->kevent))
+ deverr (dev, "kevent %d may have been dropped", work);
+ else
+ devdbg (dev, "kevent %d scheduled", work);
+}
+EXPORT_SYMBOL_GPL(usbnet_defer_kevent);
+
+/*-------------------------------------------------------------------------*/
+
+static void rx_complete (struct urb *urb);
+
+static void rx_submit (struct usbnet *dev, struct urb *urb, gfp_t flags)
+{
+ struct sk_buff *skb;
+ struct skb_data *entry;
+ int retval = 0;
+ unsigned long lockflags;
+ size_t size = dev->rx_urb_size;
+
+ if ((skb = alloc_skb (size + NET_IP_ALIGN, flags)) == NULL) {
+ if (netif_msg_rx_err (dev))
+ devdbg (dev, "no rx skb");
+ usbnet_defer_kevent (dev, EVENT_RX_MEMORY);
+ usb_free_urb (urb);
+ return;
+ }
+ skb_reserve (skb, NET_IP_ALIGN);
+
+ entry = (struct skb_data *) skb->cb;
+ entry->urb = urb;
+ entry->dev = dev;
+ entry->state = rx_start;
+ entry->length = 0;
+
+ usb_fill_bulk_urb (urb, dev->udev, dev->in,
+ skb->data, size, rx_complete, skb);
+
+ spin_lock_irqsave (&dev->rxq.lock, lockflags);
+
+ if (netif_running (dev->net)
+ && netif_device_present (dev->net)
+ && !test_bit (EVENT_RX_HALT, &dev->flags)) {
+ switch (retval = usb_submit_urb (urb, GFP_ATOMIC)){
+ case -EPIPE:
+ usbnet_defer_kevent (dev, EVENT_RX_HALT);
+ break;
+ case -ENOMEM:
+ usbnet_defer_kevent (dev, EVENT_RX_MEMORY);
+ break;
+ case -ENODEV:
+ if (netif_msg_ifdown (dev))
+ devdbg (dev, "device gone");
+ netif_device_detach (dev->net);
+ break;
+ default:
+ if (netif_msg_rx_err (dev))
+ devdbg (dev, "rx submit, %d", retval);
+ tasklet_schedule (&dev->bh);
+ break;
+ case 0:
+ __skb_queue_tail (&dev->rxq, skb);
+ }
+ } else {
+ if (netif_msg_ifdown (dev))
+ devdbg (dev, "rx: stopped");
+ retval = -ENOLINK;
+ }
+ spin_unlock_irqrestore (&dev->rxq.lock, lockflags);
+ if (retval) {
+ dev_kfree_skb_any (skb);
+ usb_free_urb (urb);
+ }
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+static inline void rx_process (struct usbnet *dev, struct sk_buff *skb)
+{
+ if (dev->driver_info->rx_fixup
+ && !dev->driver_info->rx_fixup (dev, skb))
+ goto error;
+ // else network stack removes extra byte if we forced a short packet
+
+ if (skb->len)
+ usbnet_skb_return (dev, skb);
+ else {
+ if (netif_msg_rx_err (dev))
+ devdbg (dev, "drop");
+error:
+ dev->stats.rx_errors++;
+ skb_queue_tail (&dev->done, skb);
+ }
+}
+
+/*-------------------------------------------------------------------------*/
+
+static void rx_complete (struct urb *urb)
+{
+ struct sk_buff *skb = (struct sk_buff *) urb->context;
+ struct skb_data *entry = (struct skb_data *) skb->cb;
+ struct usbnet *dev = entry->dev;
+ int urb_status = urb->status;
+
+ skb_put (skb, urb->actual_length);
+ entry->state = rx_done;
+ entry->urb = NULL;
+
+ switch (urb_status) {
+ // success
+ case 0:
+ if (skb->len < dev->net->hard_header_len) {
+ entry->state = rx_cleanup;
+ dev->stats.rx_errors++;
+ dev->stats.rx_length_errors++;
+ if (netif_msg_rx_err (dev))
+ devdbg (dev, "rx length %d", skb->len);
+ }
+ break;
+
+ // stalls need manual reset. this is rare ... except that
+ // when going through USB 2.0 TTs, unplug appears this way.
+ // we avoid the highspeed version of the ETIMEOUT/EILSEQ
+ // storm, recovering as needed.
+ case -EPIPE:
+ dev->stats.rx_errors++;
+ usbnet_defer_kevent (dev, EVENT_RX_HALT);
+ // FALLTHROUGH
+
+ // software-driven interface shutdown
+ case -ECONNRESET: // async unlink
+ case -ESHUTDOWN: // hardware gone
+ if (netif_msg_ifdown (dev))
+ devdbg (dev, "rx shutdown, code %d", urb_status);
+ goto block;
+
+ // we get controller i/o faults during khubd disconnect() delays.
+ // throttle down resubmits, to avoid log floods; just temporarily,
+ // so we still recover when the fault isn't a khubd delay.
+ case -EPROTO:
+ case -ETIME:
+ case -EILSEQ:
+ dev->stats.rx_errors++;
+ if (!timer_pending (&dev->delay)) {
+ mod_timer (&dev->delay, jiffies + THROTTLE_JIFFIES);
+ if (netif_msg_link (dev))
+ devdbg (dev, "rx throttle %d", urb_status);
+ }
+block:
+ entry->state = rx_cleanup;
+ entry->urb = urb;
+ urb = NULL;
+ break;
+
+ // data overrun ... flush fifo?
+ case -EOVERFLOW:
+ dev->stats.rx_over_errors++;
+ // FALLTHROUGH
+
+ default:
+ entry->state = rx_cleanup;
+ dev->stats.rx_errors++;
+ if (netif_msg_rx_err (dev))
+ devdbg (dev, "rx status %d", urb_status);
+ break;
+ }
+
+ defer_bh(dev, skb, &dev->rxq);
+
+ if (urb) {
+ if (netif_running (dev->net)
+ && !test_bit (EVENT_RX_HALT, &dev->flags)) {
+ rx_submit (dev, urb, GFP_ATOMIC);
+ return;
+ }
+ usb_free_urb (urb);
+ }
+ if (netif_msg_rx_err (dev))
+ devdbg (dev, "no read resubmitted");
+}
+
+static void intr_complete (struct urb *urb)
+{
+ struct usbnet *dev = urb->context;
+ int status = urb->status;
+
+ switch (status) {
+ /* success */
+ case 0:
+ dev->driver_info->status(dev, urb);
+ break;
+
+ /* software-driven interface shutdown */
+ case -ENOENT: // urb killed
+ case -ESHUTDOWN: // hardware gone
+ if (netif_msg_ifdown (dev))
+ devdbg (dev, "intr shutdown, code %d", status);
+ return;
+
+ /* NOTE: not throttling like RX/TX, since this endpoint
+ * already polls infrequently
+ */
+ default:
+ devdbg (dev, "intr status %d", status);
+ break;
+ }
+
+ if (!netif_running (dev->net))
+ return;
+
+ memset(urb->transfer_buffer, 0, urb->transfer_buffer_length);
+ status = usb_submit_urb (urb, GFP_ATOMIC);
+ if (status != 0 && netif_msg_timer (dev))
+ deverr(dev, "intr resubmit --> %d", status);
+}
+
+/*-------------------------------------------------------------------------*/
+
+// unlink pending rx/tx; completion handlers do all other cleanup
+
+static int unlink_urbs (struct usbnet *dev, struct sk_buff_head *q)
+{
+ unsigned long flags;
+ struct sk_buff *skb, *skbnext;
+ int count = 0;
+
+ spin_lock_irqsave (&q->lock, flags);
+ for (skb = q->next; skb != (struct sk_buff *) q; skb = skbnext) {
+ struct skb_data *entry;
+ struct urb *urb;
+ int retval;
+
+ entry = (struct skb_data *) skb->cb;
+ urb = entry->urb;
+ skbnext = skb->next;
+
+ // during some PM-driven resume scenarios,
+ // these (async) unlinks complete immediately
+ retval = usb_unlink_urb (urb);
+ if (retval != -EINPROGRESS && retval != 0)
+ devdbg (dev, "unlink urb err, %d", retval);
+ else
+ count++;
+ }
+ spin_unlock_irqrestore (&q->lock, flags);
+ return count;
+}
+
+// Flush all pending rx urbs
+// minidrivers may need to do this when the MTU changes
+
+void usbnet_unlink_rx_urbs(struct usbnet *dev)
+{
+ if (netif_running(dev->net)) {
+ (void) unlink_urbs (dev, &dev->rxq);
+ tasklet_schedule(&dev->bh);
+ }
+}
+EXPORT_SYMBOL_GPL(usbnet_unlink_rx_urbs);
+
+/*-------------------------------------------------------------------------*/
+
+// precondition: never called in_interrupt
+
+static int usbnet_stop (struct net_device *net)
+{
+ struct usbnet *dev = netdev_priv(net);
+ int temp;
+ DECLARE_WAIT_QUEUE_HEAD_ONSTACK (unlink_wakeup);
+ DECLARE_WAITQUEUE (wait, current);
+
+ netif_stop_queue (net);
+
+ if (netif_msg_ifdown (dev))
+ devinfo (dev, "stop stats: rx/tx %ld/%ld, errs %ld/%ld",
+ dev->stats.rx_packets, dev->stats.tx_packets,
+ dev->stats.rx_errors, dev->stats.tx_errors
+ );
+
+ // ensure there are no more active urbs
+ add_wait_queue (&unlink_wakeup, &wait);
+ dev->wait = &unlink_wakeup;
+ temp = unlink_urbs (dev, &dev->txq) + unlink_urbs (dev, &dev->rxq);
+
+ // maybe wait for deletions to finish.
+ while (!skb_queue_empty(&dev->rxq) &&
+ !skb_queue_empty(&dev->txq) &&
+ !skb_queue_empty(&dev->done)) {
+ msleep(UNLINK_TIMEOUT_MS);
+ if (netif_msg_ifdown (dev))
+ devdbg (dev, "waited for %d urb completions", temp);
+ }
+ dev->wait = NULL;
+ remove_wait_queue (&unlink_wakeup, &wait);
+
+ usb_kill_urb(dev->interrupt);
+
+ /* deferred work (task, timer, softirq) must also stop.
+ * can't flush_scheduled_work() until we drop rtnl (later),
+ * else workers could deadlock; so make workers a NOP.
+ */
+ dev->flags = 0;
+ del_timer_sync (&dev->delay);
+ tasklet_kill (&dev->bh);
+
+ return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+// posts reads, and enables write queuing
+
+// precondition: never called in_interrupt
+
+static int usbnet_open (struct net_device *net)
+{
+ struct usbnet *dev = netdev_priv(net);
+ int retval = 0;
+ struct driver_info *info = dev->driver_info;
+
+ // put into "known safe" state
+ if (info->reset && (retval = info->reset (dev)) < 0) {
+ if (netif_msg_ifup (dev))
+ devinfo (dev,
+ "open reset fail (%d) usbnet usb-%s-%s, %s",
+ retval,
+ dev->udev->bus->bus_name, dev->udev->devpath,
+ info->description);
+ goto done;
+ }
+
+ // insist peer be connected
+ if (info->check_connect && (retval = info->check_connect (dev)) < 0) {
+ if (netif_msg_ifup (dev))
+ devdbg (dev, "can't open; %d", retval);
+ goto done;
+ }
+
+ /* start any status interrupt transfer */
+ if (dev->interrupt) {
+ retval = usb_submit_urb (dev->interrupt, GFP_KERNEL);
+ if (retval < 0) {
+ if (netif_msg_ifup (dev))
+ deverr (dev, "intr submit %d", retval);
+ goto done;
+ }
+ }
+
+ netif_start_queue (net);
+ if (netif_msg_ifup (dev)) {
+ char *framing;
+
+ if (dev->driver_info->flags & FLAG_FRAMING_NC)
+ framing = "NetChip";
+ else if (dev->driver_info->flags & FLAG_FRAMING_GL)
+ framing = "GeneSys";
+ else if (dev->driver_info->flags & FLAG_FRAMING_Z)
+ framing = "Zaurus";
+ else if (dev->driver_info->flags & FLAG_FRAMING_RN)
+ framing = "RNDIS";
+ else if (dev->driver_info->flags & FLAG_FRAMING_AX)
+ framing = "ASIX";
+ else
+ framing = "simple";
+
+ devinfo (dev, "open: enable queueing "
+ "(rx %d, tx %d) mtu %d %s framing",
+ (int)RX_QLEN (dev), (int)TX_QLEN (dev), dev->net->mtu,
+ framing);
+ }
+
+ // delay posting reads until we're fully open
+ tasklet_schedule (&dev->bh);
+done:
+ return retval;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* ethtool methods; minidrivers may need to add some more, but
+ * they'll probably want to use this base set.
+ */
+
+#if defined(CONFIG_MII) || defined(CONFIG_MII_MODULE)
+#define HAVE_MII
+
+int usbnet_get_settings (struct net_device *net, struct ethtool_cmd *cmd)
+{
+ struct usbnet *dev = netdev_priv(net);
+
+ if (!dev->mii.mdio_read)
+ return -EOPNOTSUPP;
+
+ return mii_ethtool_gset(&dev->mii, cmd);
+}
+EXPORT_SYMBOL_GPL(usbnet_get_settings);
+
+int usbnet_set_settings (struct net_device *net, struct ethtool_cmd *cmd)
+{
+ struct usbnet *dev = netdev_priv(net);
+ int retval;
+
+ if (!dev->mii.mdio_write)
+ return -EOPNOTSUPP;
+
+ retval = mii_ethtool_sset(&dev->mii, cmd);
+
+ /* link speed/duplex might have changed */
+ if (dev->driver_info->link_reset)
+ dev->driver_info->link_reset(dev);
+
+ return retval;
+
+}
+EXPORT_SYMBOL_GPL(usbnet_set_settings);
+
+u32 usbnet_get_link (struct net_device *net)
+{
+ struct usbnet *dev = netdev_priv(net);
+
+ /* If a check_connect is defined, return its result */
+ if (dev->driver_info->check_connect)
+ return dev->driver_info->check_connect (dev) == 0;
+
+ /* if the device has mii operations, use those */
+ if (dev->mii.mdio_read)
+ return mii_link_ok(&dev->mii);
+
+ /* Otherwise, say we're up (to avoid breaking scripts) */
+ return 1;
+}
+EXPORT_SYMBOL_GPL(usbnet_get_link);
+
+int usbnet_nway_reset(struct net_device *net)
+{
+ struct usbnet *dev = netdev_priv(net);
+
+ if (!dev->mii.mdio_write)
+ return -EOPNOTSUPP;
+
+ return mii_nway_restart(&dev->mii);
+}
+EXPORT_SYMBOL_GPL(usbnet_nway_reset);
+
+#endif /* HAVE_MII */
+
+void usbnet_get_drvinfo (struct net_device *net, struct ethtool_drvinfo *info)
+{
+ struct usbnet *dev = netdev_priv(net);
+
+ strncpy (info->driver, dev->driver_name, sizeof info->driver);
+ strncpy (info->version, DRIVER_VERSION, sizeof info->version);
+ strncpy (info->fw_version, dev->driver_info->description,
+ sizeof info->fw_version);
+ usb_make_path (dev->udev, info->bus_info, sizeof info->bus_info);
+}
+EXPORT_SYMBOL_GPL(usbnet_get_drvinfo);
+
+u32 usbnet_get_msglevel (struct net_device *net)
+{
+ struct usbnet *dev = netdev_priv(net);
+
+ return dev->msg_enable;
+}
+EXPORT_SYMBOL_GPL(usbnet_get_msglevel);
+
+void usbnet_set_msglevel (struct net_device *net, u32 level)
+{
+ struct usbnet *dev = netdev_priv(net);
+
+ dev->msg_enable = level;
+}
+EXPORT_SYMBOL_GPL(usbnet_set_msglevel);
+
+/* drivers may override default ethtool_ops in their bind() routine */
+static struct ethtool_ops usbnet_ethtool_ops = {
+#ifdef HAVE_MII
+ .get_settings = usbnet_get_settings,
+ .set_settings = usbnet_set_settings,
+ .get_link = usbnet_get_link,
+ .nway_reset = usbnet_nway_reset,
+#endif
+ .get_drvinfo = usbnet_get_drvinfo,
+ .get_msglevel = usbnet_get_msglevel,
+ .set_msglevel = usbnet_set_msglevel,
+};
+
+/*-------------------------------------------------------------------------*/
+
+/* work that cannot be done in interrupt context uses keventd.
+ *
+ * NOTE: with 2.5 we could do more of this using completion callbacks,
+ * especially now that control transfers can be queued.
+ */
+static void
+kevent (struct work_struct *work)
+{
+ struct usbnet *dev =
+ container_of(work, struct usbnet, kevent);
+ int status;
+
+ /* usb_clear_halt() needs a thread context */
+ if (test_bit (EVENT_TX_HALT, &dev->flags)) {
+ unlink_urbs (dev, &dev->txq);
+ status = usb_clear_halt (dev->udev, dev->out);
+ if (status < 0
+ && status != -EPIPE
+ && status != -ESHUTDOWN) {
+ if (netif_msg_tx_err (dev))
+ deverr (dev, "can't clear tx halt, status %d",
+ status);
+ } else {
+ clear_bit (EVENT_TX_HALT, &dev->flags);
+ if (status != -ESHUTDOWN)
+ netif_wake_queue (dev->net);
+ }
+ }
+ if (test_bit (EVENT_RX_HALT, &dev->flags)) {
+ unlink_urbs (dev, &dev->rxq);
+ status = usb_clear_halt (dev->udev, dev->in);
+ if (status < 0
+ && status != -EPIPE
+ && status != -ESHUTDOWN) {
+ if (netif_msg_rx_err (dev))
+ deverr (dev, "can't clear rx halt, status %d",
+ status);
+ } else {
+ clear_bit (EVENT_RX_HALT, &dev->flags);
+ tasklet_schedule (&dev->bh);
+ }
+ }
+
+ /* tasklet could resubmit itself forever if memory is tight */
+ if (test_bit (EVENT_RX_MEMORY, &dev->flags)) {
+ struct urb *urb = NULL;
+
+ if (netif_running (dev->net))
+ urb = usb_alloc_urb (0, GFP_KERNEL);
+ else
+ clear_bit (EVENT_RX_MEMORY, &dev->flags);
+ if (urb != NULL) {
+ clear_bit (EVENT_RX_MEMORY, &dev->flags);
+ rx_submit (dev, urb, GFP_KERNEL);
+ tasklet_schedule (&dev->bh);
+ }
+ }
+
+ if (test_bit (EVENT_LINK_RESET, &dev->flags)) {
+ struct driver_info *info = dev->driver_info;
+ int retval = 0;
+
+ clear_bit (EVENT_LINK_RESET, &dev->flags);
+ if(info->link_reset && (retval = info->link_reset(dev)) < 0) {
+ devinfo(dev, "link reset failed (%d) usbnet usb-%s-%s, %s",
+ retval,
+ dev->udev->bus->bus_name, dev->udev->devpath,
+ info->description);
+ }
+ }
+
+ if (dev->flags)
+ devdbg (dev, "kevent done, flags = 0x%lx",
+ dev->flags);
+}
+
+/*-------------------------------------------------------------------------*/
+
+static void tx_complete (struct urb *urb)
+{
+ struct sk_buff *skb = (struct sk_buff *) urb->context;
+ struct skb_data *entry = (struct skb_data *) skb->cb;
+ struct usbnet *dev = entry->dev;
+
+ if (urb->status == 0) {
+ dev->stats.tx_packets++;
+ dev->stats.tx_bytes += entry->length;
+ } else {
+ dev->stats.tx_errors++;
+
+ switch (urb->status) {
+ case -EPIPE:
+ usbnet_defer_kevent (dev, EVENT_TX_HALT);
+ break;
+
+ /* software-driven interface shutdown */
+ case -ECONNRESET: // async unlink
+ case -ESHUTDOWN: // hardware gone
+ break;
+
+ // like rx, tx gets controller i/o faults during khubd delays
+ // and so it uses the same throttling mechanism.
+ case -EPROTO:
+ case -ETIME:
+ case -EILSEQ:
+ if (!timer_pending (&dev->delay)) {
+ mod_timer (&dev->delay,
+ jiffies + THROTTLE_JIFFIES);
+ if (netif_msg_link (dev))
+ devdbg (dev, "tx throttle %d",
+ urb->status);
+ }
+ netif_stop_queue (dev->net);
+ break;
+ default:
+ if (netif_msg_tx_err (dev))
+ devdbg (dev, "tx err %d", entry->urb->status);
+ break;
+ }
+ }
+
+ urb->dev = NULL;
+ entry->state = tx_done;
+ defer_bh(dev, skb, &dev->txq);
+}
+
+/*-------------------------------------------------------------------------*/
+
+static void usbnet_tx_timeout (struct net_device *net)
+{
+ struct usbnet *dev = netdev_priv(net);
+
+ unlink_urbs (dev, &dev->txq);
+ tasklet_schedule (&dev->bh);
+
+ // FIXME: device recovery -- reset?
+}
+
+/*-------------------------------------------------------------------------*/
+
+static int usbnet_start_xmit (struct sk_buff *skb, struct net_device *net)
+{
+ struct usbnet *dev = netdev_priv(net);
+ int length;
+ int retval = NET_XMIT_SUCCESS;
+ struct urb *urb = NULL;
+ struct skb_data *entry;
+ struct driver_info *info = dev->driver_info;
+ unsigned long flags;
+
+ // some devices want funky USB-level framing, for
+ // win32 driver (usually) and/or hardware quirks
+ if (info->tx_fixup) {
+ skb = info->tx_fixup (dev, skb, GFP_ATOMIC);
+ if (!skb) {
+ if (netif_msg_tx_err (dev))
+ devdbg (dev, "can't tx_fixup skb");
+ goto drop;
+ }
+ }
+ length = skb->len;
+
+ if (!(urb = usb_alloc_urb (0, GFP_ATOMIC))) {
+ if (netif_msg_tx_err (dev))
+ devdbg (dev, "no urb");
+ goto drop;
+ }
+
+ entry = (struct skb_data *) skb->cb;
+ entry->urb = urb;
+ entry->dev = dev;
+ entry->state = tx_start;
+ entry->length = length;
+
+ usb_fill_bulk_urb (urb, dev->udev, dev->out,
+ skb->data, skb->len, tx_complete, skb);
+
+ /* don't assume the hardware handles USB_ZERO_PACKET
+ * NOTE: strictly conforming cdc-ether devices should expect
+ * the ZLP here, but ignore the one-byte packet.
+ *
+ * FIXME zero that byte, if it doesn't require a new skb.
+ */
+ if ((length % dev->maxpacket) == 0)
+ urb->transfer_buffer_length++;
+
+ spin_lock_irqsave (&dev->txq.lock, flags);
+
+ switch ((retval = usb_submit_urb (urb, GFP_ATOMIC))) {
+ case -EPIPE:
+ netif_stop_queue (net);
+ usbnet_defer_kevent (dev, EVENT_TX_HALT);
+ break;
+ default:
+ if (netif_msg_tx_err (dev))
+ devdbg (dev, "tx: submit urb err %d", retval);
+ break;
+ case 0:
+ net->trans_start = jiffies;
+ __skb_queue_tail (&dev->txq, skb);
+ if (dev->txq.qlen >= TX_QLEN (dev))
+ netif_stop_queue (net);
+ }
+ spin_unlock_irqrestore (&dev->txq.lock, flags);
+
+ if (retval) {
+ if (netif_msg_tx_err (dev))
+ devdbg (dev, "drop, code %d", retval);
+drop:
+ retval = NET_XMIT_SUCCESS;
+ dev->stats.tx_dropped++;
+ if (skb)
+ dev_kfree_skb_any (skb);
+ usb_free_urb (urb);
+ } else if (netif_msg_tx_queued (dev)) {
+ devdbg (dev, "> tx, len %d, type 0x%x",
+ length, skb->protocol);
+ }
+ return retval;
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+// tasklet (work deferred from completions, in_irq) or timer
+
+static void usbnet_bh (unsigned long param)
+{
+ struct usbnet *dev = (struct usbnet *) param;
+ struct sk_buff *skb;
+ struct skb_data *entry;
+
+ while ((skb = skb_dequeue (&dev->done))) {
+ entry = (struct skb_data *) skb->cb;
+ switch (entry->state) {
+ case rx_done:
+ entry->state = rx_cleanup;
+ rx_process (dev, skb);
+ continue;
+ case tx_done:
+ case rx_cleanup:
+ usb_free_urb (entry->urb);
+ dev_kfree_skb (skb);
+ continue;
+ default:
+ devdbg (dev, "bogus skb state %d", entry->state);
+ }
+ }
+
+ // waiting for all pending urbs to complete?
+ if (dev->wait) {
+ if ((dev->txq.qlen + dev->rxq.qlen + dev->done.qlen) == 0) {
+ wake_up (dev->wait);
+ }
+
+ // or are we maybe short a few urbs?
+ } else if (netif_running (dev->net)
+ && netif_device_present (dev->net)
+ && !timer_pending (&dev->delay)
+ && !test_bit (EVENT_RX_HALT, &dev->flags)) {
+ int temp = dev->rxq.qlen;
+ int qlen = RX_QLEN (dev);
+
+ if (temp < qlen) {
+ struct urb *urb;
+ int i;
+
+ // don't refill the queue all at once
+ for (i = 0; i < 10 && dev->rxq.qlen < qlen; i++) {
+ urb = usb_alloc_urb (0, GFP_ATOMIC);
+ if (urb != NULL)
+ rx_submit (dev, urb, GFP_ATOMIC);
+ }
+ if (temp != dev->rxq.qlen && netif_msg_link (dev))
+ devdbg (dev, "rxqlen %d --> %d",
+ temp, dev->rxq.qlen);
+ if (dev->rxq.qlen < qlen)
+ tasklet_schedule (&dev->bh);
+ }
+ if (dev->txq.qlen < TX_QLEN (dev))
+ netif_wake_queue (dev->net);
+ }
+}
+
+
+
+/*-------------------------------------------------------------------------
+ *
+ * USB Device Driver support
+ *
+ *-------------------------------------------------------------------------*/
+
+// precondition: never called in_interrupt
+
+void usbnet_disconnect (struct usb_interface *intf)
+{
+ struct usbnet *dev;
+ struct usb_device *xdev;
+ struct net_device *net;
+
+ dev = usb_get_intfdata(intf);
+ usb_set_intfdata(intf, NULL);
+ if (!dev)
+ return;
+
+ xdev = interface_to_usbdev (intf);
+
+ if (netif_msg_probe (dev))
+ devinfo (dev, "unregister '%s' usb-%s-%s, %s",
+ intf->dev.driver->name,
+ xdev->bus->bus_name, xdev->devpath,
+ dev->driver_info->description);
+
+ net = dev->net;
+ unregister_netdev (net);
+
+ /* we don't hold rtnl here ... */
+ flush_scheduled_work ();
+
+ if (dev->driver_info->unbind)
+ dev->driver_info->unbind (dev, intf);
+
+ free_netdev(net);
+ usb_put_dev (xdev);
+}
+EXPORT_SYMBOL_GPL(usbnet_disconnect);
+
+
+/*-------------------------------------------------------------------------*/
+
+// precondition: never called in_interrupt
+
+int
+usbnet_probe (struct usb_interface *udev, const struct usb_device_id *prod)
+{
+ struct usbnet *dev;
+ struct net_device *net;
+ struct usb_host_interface *interface;
+ struct driver_info *info;
+ struct usb_device *xdev;
+ int status;
+ const char *name;
+
+ name = udev->dev.driver->name;
+ info = (struct driver_info *) prod->driver_info;
+ if (!info) {
+ dev_dbg (&udev->dev, "blacklisted by %s\n", name);
+ return -ENODEV;
+ }
+ xdev = interface_to_usbdev (udev);
+ interface = udev->cur_altsetting;
+
+ usb_get_dev (xdev);
+
+ status = -ENOMEM;
+
+ // set up our own records
+ net = alloc_etherdev(sizeof(*dev));
+ if (!net) {
+ dbg ("can't kmalloc dev");
+ goto out;
+ }
+
+ dev = netdev_priv(net);
+ dev->udev = xdev;
+ dev->driver_info = info;
+ dev->driver_name = name;
+ dev->msg_enable = netif_msg_init (msg_level, NETIF_MSG_DRV
+ | NETIF_MSG_PROBE | NETIF_MSG_LINK);
+ skb_queue_head_init (&dev->rxq);
+ skb_queue_head_init (&dev->txq);
+ skb_queue_head_init (&dev->done);
+ dev->bh.func = usbnet_bh;
+ dev->bh.data = (unsigned long) dev;
+ INIT_WORK (&dev->kevent, kevent);
+ dev->delay.function = usbnet_bh;
+ dev->delay.data = (unsigned long) dev;
+ init_timer (&dev->delay);
+ mutex_init (&dev->phy_mutex);
+
+ SET_MODULE_OWNER (net);
+ dev->net = net;
+ strcpy (net->name, "usb%d");
+ memcpy (net->dev_addr, node_id, sizeof node_id);
+
+ /* rx and tx sides can use different message sizes;
+ * bind() should set rx_urb_size in that case.
+ */
+ dev->hard_mtu = net->mtu + net->hard_header_len;
+#if 0
+// dma_supported() is deeply broken on almost all architectures
+ // possible with some EHCI controllers
+ if (dma_supported (&udev->dev, DMA_64BIT_MASK))
+ net->features |= NETIF_F_HIGHDMA;
+#endif
+
+ net->change_mtu = usbnet_change_mtu;
+ net->get_stats = usbnet_get_stats;
+ net->hard_start_xmit = usbnet_start_xmit;
+ net->open = usbnet_open;
+ net->stop = usbnet_stop;
+ net->watchdog_timeo = TX_TIMEOUT_JIFFIES;
+ net->tx_timeout = usbnet_tx_timeout;
+ net->ethtool_ops = &usbnet_ethtool_ops;
+
+ // allow device-specific bind/init procedures
+ // NOTE net->name still not usable ...
+ if (info->bind) {
+ status = info->bind (dev, udev);
+ if (status < 0)
+ goto out1;
+
+ // heuristic: "usb%d" for links we know are two-host,
+ // else "eth%d" when there's reasonable doubt. userspace
+ // can rename the link if it knows better.
+ if ((dev->driver_info->flags & FLAG_ETHER) != 0
+ && (net->dev_addr [0] & 0x02) == 0)
+ strcpy (net->name, "eth%d");
+
+ /* maybe the remote can't receive an Ethernet MTU */
+ if (net->mtu > (dev->hard_mtu - net->hard_header_len))
+ net->mtu = dev->hard_mtu - net->hard_header_len;
+ } else if (!info->in || !info->out)
+ status = usbnet_get_endpoints (dev, udev);
+ else {
+ dev->in = usb_rcvbulkpipe (xdev, info->in);
+ dev->out = usb_sndbulkpipe (xdev, info->out);
+ if (!(info->flags & FLAG_NO_SETINT))
+ status = usb_set_interface (xdev,
+ interface->desc.bInterfaceNumber,
+ interface->desc.bAlternateSetting);
+ else
+ status = 0;
+
+ }
+ if (status == 0 && dev->status)
+ status = init_status (dev, udev);
+ if (status < 0)
+ goto out3;
+
+ if (!dev->rx_urb_size)
+ dev->rx_urb_size = dev->hard_mtu;
+ dev->maxpacket = usb_maxpacket (dev->udev, dev->out, 1);
+
+ SET_NETDEV_DEV(net, &udev->dev);
+ status = register_netdev (net);
+ if (status)
+ goto out3;
+ if (netif_msg_probe (dev))
+ devinfo (dev, "register '%s' at usb-%s-%s, %s, "
+ "%02x:%02x:%02x:%02x:%02x:%02x",
+ udev->dev.driver->name,
+ xdev->bus->bus_name, xdev->devpath,
+ dev->driver_info->description,
+ net->dev_addr [0], net->dev_addr [1],
+ net->dev_addr [2], net->dev_addr [3],
+ net->dev_addr [4], net->dev_addr [5]);
+
+ // ok, it's ready to go.
+ usb_set_intfdata (udev, dev);
+
+ // start as if the link is up
+ netif_device_attach (net);
+
+ return 0;
+
+out3:
+ if (info->unbind)
+ info->unbind (dev, udev);
+out1:
+ free_netdev(net);
+out:
+ usb_put_dev(xdev);
+ return status;
+}
+EXPORT_SYMBOL_GPL(usbnet_probe);
+
+/*-------------------------------------------------------------------------*/
+
+/* FIXME these suspend/resume methods assume non-CDC style
+ * devices, with only one interface.
+ */
+
+int usbnet_suspend (struct usb_interface *intf, pm_message_t message)
+{
+ struct usbnet *dev = usb_get_intfdata(intf);
+
+ /* accelerate emptying of the rx and queues, to avoid
+ * having everything error out.
+ */
+ netif_device_detach (dev->net);
+ (void) unlink_urbs (dev, &dev->rxq);
+ (void) unlink_urbs (dev, &dev->txq);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(usbnet_suspend);
+
+int usbnet_resume (struct usb_interface *intf)
+{
+ struct usbnet *dev = usb_get_intfdata(intf);
+
+ netif_device_attach (dev->net);
+ tasklet_schedule (&dev->bh);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(usbnet_resume);
+
+
+/*-------------------------------------------------------------------------*/
+
+static int __init usbnet_init(void)
+{
+ /* compiler should optimize this out */
+ BUILD_BUG_ON (sizeof (((struct sk_buff *)0)->cb)
+ < sizeof (struct skb_data));
+
+ random_ether_addr(node_id);
+ return 0;
+}
+module_init(usbnet_init);
+
+static void __exit usbnet_exit(void)
+{
+}
+module_exit(usbnet_exit);
+
+MODULE_AUTHOR("David Brownell");
+MODULE_DESCRIPTION("USB network driver framework");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/usb/usbnet.h b/drivers/net/usb/usbnet.h
new file mode 100644
index 0000000..82db5a8
--- /dev/null
+++ b/drivers/net/usb/usbnet.h
@@ -0,0 +1,200 @@
+/*
+ * USB Networking Link Interface
+ *
+ * Copyright (C) 2000-2005 by David Brownell <dbrownell@users.sourceforge.net>
+ * Copyright (C) 2003-2005 David Hollis <dhollis@davehollis.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+
+#ifndef __USBNET_H
+#define __USBNET_H
+
+
+/* interface from usbnet core to each USB networking link we handle */
+struct usbnet {
+ /* housekeeping */
+ struct usb_device *udev;
+ struct driver_info *driver_info;
+ const char *driver_name;
+ wait_queue_head_t *wait;
+ struct mutex phy_mutex;
+
+ /* i/o info: pipes etc */
+ unsigned in, out;
+ struct usb_host_endpoint *status;
+ unsigned maxpacket;
+ struct timer_list delay;
+
+ /* protocol/interface state */
+ struct net_device *net;
+ struct net_device_stats stats;
+ int msg_enable;
+ unsigned long data [5];
+ u32 xid;
+ u32 hard_mtu; /* count any extra framing */
+ size_t rx_urb_size; /* size for rx urbs */
+ struct mii_if_info mii;
+
+ /* various kinds of pending driver work */
+ struct sk_buff_head rxq;
+ struct sk_buff_head txq;
+ struct sk_buff_head done;
+ struct urb *interrupt;
+ struct tasklet_struct bh;
+
+ struct work_struct kevent;
+ unsigned long flags;
+# define EVENT_TX_HALT 0
+# define EVENT_RX_HALT 1
+# define EVENT_RX_MEMORY 2
+# define EVENT_STS_SPLIT 3
+# define EVENT_LINK_RESET 4
+};
+
+static inline struct usb_driver *driver_of(struct usb_interface *intf)
+{
+ return to_usb_driver(intf->dev.driver);
+}
+
+/* interface from the device/framing level "minidriver" to core */
+struct driver_info {
+ char *description;
+
+ int flags;
+/* framing is CDC Ethernet, not writing ZLPs (hw issues), or optionally: */
+#define FLAG_FRAMING_NC 0x0001 /* guard against device dropouts */
+#define FLAG_FRAMING_GL 0x0002 /* genelink batches packets */
+#define FLAG_FRAMING_Z 0x0004 /* zaurus adds a trailer */
+#define FLAG_FRAMING_RN 0x0008 /* RNDIS batches, plus huge header */
+
+#define FLAG_NO_SETINT 0x0010 /* device can't set_interface() */
+#define FLAG_ETHER 0x0020 /* maybe use "eth%d" names */
+
+#define FLAG_FRAMING_AX 0x0040 /* AX88772/178 packets */
+
+ /* init device ... can sleep, or cause probe() failure */
+ int (*bind)(struct usbnet *, struct usb_interface *);
+
+ /* cleanup device ... can sleep, but can't fail */
+ void (*unbind)(struct usbnet *, struct usb_interface *);
+
+ /* reset device ... can sleep */
+ int (*reset)(struct usbnet *);
+
+ /* see if peer is connected ... can sleep */
+ int (*check_connect)(struct usbnet *);
+
+ /* for status polling */
+ void (*status)(struct usbnet *, struct urb *);
+
+ /* link reset handling, called from defer_kevent */
+ int (*link_reset)(struct usbnet *);
+
+ /* fixup rx packet (strip framing) */
+ int (*rx_fixup)(struct usbnet *dev, struct sk_buff *skb);
+
+ /* fixup tx packet (add framing) */
+ struct sk_buff *(*tx_fixup)(struct usbnet *dev,
+ struct sk_buff *skb, gfp_t flags);
+
+ /* for new devices, use the descriptor-reading code instead */
+ int in; /* rx endpoint */
+ int out; /* tx endpoint */
+
+ unsigned long data; /* Misc driver specific data */
+};
+
+/* Minidrivers are just drivers using the "usbnet" core as a powerful
+ * network-specific subroutine library ... that happens to do pretty
+ * much everything except custom framing and chip-specific stuff.
+ */
+extern int usbnet_probe(struct usb_interface *, const struct usb_device_id *);
+extern int usbnet_suspend (struct usb_interface *, pm_message_t );
+extern int usbnet_resume (struct usb_interface *);
+extern void usbnet_disconnect(struct usb_interface *);
+
+
+/* Drivers that reuse some of the standard USB CDC infrastructure
+ * (notably, using multiple interfaces according to the CDC
+ * union descriptor) get some helper code.
+ */
+struct cdc_state {
+ struct usb_cdc_header_desc *header;
+ struct usb_cdc_union_desc *u;
+ struct usb_cdc_ether_desc *ether;
+ struct usb_interface *control;
+ struct usb_interface *data;
+};
+
+extern int usbnet_generic_cdc_bind (struct usbnet *, struct usb_interface *);
+extern void usbnet_cdc_unbind (struct usbnet *, struct usb_interface *);
+
+/* CDC and RNDIS support the same host-chosen packet filters for IN transfers */
+#define DEFAULT_FILTER (USB_CDC_PACKET_TYPE_BROADCAST \
+ |USB_CDC_PACKET_TYPE_ALL_MULTICAST \
+ |USB_CDC_PACKET_TYPE_PROMISCUOUS \
+ |USB_CDC_PACKET_TYPE_DIRECTED)
+
+
+/* we record the state for each of our queued skbs */
+enum skb_state {
+ illegal = 0,
+ tx_start, tx_done,
+ rx_start, rx_done, rx_cleanup
+};
+
+struct skb_data { /* skb->cb is one of these */
+ struct urb *urb;
+ struct usbnet *dev;
+ enum skb_state state;
+ size_t length;
+};
+
+
+extern int usbnet_get_endpoints(struct usbnet *, struct usb_interface *);
+extern void usbnet_defer_kevent (struct usbnet *, int);
+extern void usbnet_skb_return (struct usbnet *, struct sk_buff *);
+extern void usbnet_unlink_rx_urbs(struct usbnet *);
+
+extern int usbnet_get_settings (struct net_device *net, struct ethtool_cmd *cmd);
+extern int usbnet_set_settings (struct net_device *net, struct ethtool_cmd *cmd);
+extern u32 usbnet_get_link (struct net_device *net);
+extern u32 usbnet_get_msglevel (struct net_device *);
+extern void usbnet_set_msglevel (struct net_device *, u32);
+extern void usbnet_get_drvinfo (struct net_device *, struct ethtool_drvinfo *);
+extern int usbnet_nway_reset(struct net_device *net);
+
+/* messaging support includes the interface name, so it must not be
+ * used before it has one ... notably, in minidriver bind() calls.
+ */
+#ifdef DEBUG
+#define devdbg(usbnet, fmt, arg...) \
+ printk(KERN_DEBUG "%s: " fmt "\n" , (usbnet)->net->name , ## arg)
+#else
+#define devdbg(usbnet, fmt, arg...) do {} while(0)
+#endif
+
+#define deverr(usbnet, fmt, arg...) \
+ printk(KERN_ERR "%s: " fmt "\n" , (usbnet)->net->name , ## arg)
+#define devwarn(usbnet, fmt, arg...) \
+ printk(KERN_WARNING "%s: " fmt "\n" , (usbnet)->net->name , ## arg)
+
+#define devinfo(usbnet, fmt, arg...) \
+ printk(KERN_INFO "%s: " fmt "\n" , (usbnet)->net->name , ## arg); \
+
+
+#endif /* __USBNET_H */
diff --git a/drivers/net/usb/zaurus.c b/drivers/net/usb/zaurus.c
new file mode 100644
index 0000000..9f98e8c
--- /dev/null
+++ b/drivers/net/usb/zaurus.c
@@ -0,0 +1,385 @@
+/*
+ * Copyright (C) 2002 Pavel Machek <pavel@ucw.cz>
+ * Copyright (C) 2002-2005 by David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+// #define DEBUG // error path messages, extra info
+// #define VERBOSE // more; success messages
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/ethtool.h>
+#include <linux/workqueue.h>
+#include <linux/mii.h>
+#include <linux/crc32.h>
+#include <linux/usb.h>
+#include <linux/usb/cdc.h>
+
+#include "usbnet.h"
+
+
+/*
+ * All known Zaurii lie about their standards conformance. At least
+ * the earliest SA-1100 models lie by saying they support CDC Ethernet.
+ * Some later models (especially PXA-25x and PXA-27x based ones) lie
+ * and say they support CDC MDLM (for access to cell phone modems).
+ *
+ * There are non-Zaurus products that use these same protocols too.
+ *
+ * The annoying thing is that at the same time Sharp was developing
+ * that annoying standards-breaking software, the Linux community had
+ * a simple "CDC Subset" working reliably on the same SA-1100 hardware.
+ * That is, the same functionality but not violating standards.
+ *
+ * The CDC Ethernet nonconformance points are troublesome to hosts
+ * with a true CDC Ethernet implementation:
+ * - Framing appends a CRC, which the spec says drivers "must not" do;
+ * - Transfers data in altsetting zero, instead of altsetting 1;
+ * - All these peripherals use the same ethernet address.
+ *
+ * The CDC MDLM nonconformance is less immediately troublesome, since all
+ * MDLM implementations are quasi-proprietary anyway.
+ */
+
+static struct sk_buff *
+zaurus_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags)
+{
+ int padlen;
+ struct sk_buff *skb2;
+
+ padlen = 2;
+ if (!skb_cloned(skb)) {
+ int tailroom = skb_tailroom(skb);
+ if ((padlen + 4) <= tailroom)
+ goto done;
+ }
+ skb2 = skb_copy_expand(skb, 0, 4 + padlen, flags);
+ dev_kfree_skb_any(skb);
+ skb = skb2;
+ if (skb) {
+ u32 fcs;
+done:
+ fcs = crc32_le(~0, skb->data, skb->len);
+ fcs = ~fcs;
+
+ *skb_put (skb, 1) = fcs & 0xff;
+ *skb_put (skb, 1) = (fcs>> 8) & 0xff;
+ *skb_put (skb, 1) = (fcs>>16) & 0xff;
+ *skb_put (skb, 1) = (fcs>>24) & 0xff;
+ }
+ return skb;
+}
+
+static int zaurus_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+ /* Belcarra's funky framing has other options; mostly
+ * TRAILERS (!) with 4 bytes CRC, and maybe 2 pad bytes.
+ */
+ dev->net->hard_header_len += 6;
+ dev->rx_urb_size = dev->net->hard_header_len + dev->net->mtu;
+ return usbnet_generic_cdc_bind(dev, intf);
+}
+
+/* PDA style devices are always connected if present */
+static int always_connected (struct usbnet *dev)
+{
+ return 0;
+}
+
+static const struct driver_info zaurus_sl5x00_info = {
+ .description = "Sharp Zaurus SL-5x00",
+ .flags = FLAG_FRAMING_Z,
+ .check_connect = always_connected,
+ .bind = zaurus_bind,
+ .unbind = usbnet_cdc_unbind,
+ .tx_fixup = zaurus_tx_fixup,
+};
+#define ZAURUS_STRONGARM_INFO ((unsigned long)&zaurus_sl5x00_info)
+
+static const struct driver_info zaurus_pxa_info = {
+ .description = "Sharp Zaurus, PXA-2xx based",
+ .flags = FLAG_FRAMING_Z,
+ .check_connect = always_connected,
+ .bind = zaurus_bind,
+ .unbind = usbnet_cdc_unbind,
+ .tx_fixup = zaurus_tx_fixup,
+};
+#define ZAURUS_PXA_INFO ((unsigned long)&zaurus_pxa_info)
+
+static const struct driver_info olympus_mxl_info = {
+ .description = "Olympus R1000",
+ .flags = FLAG_FRAMING_Z,
+ .check_connect = always_connected,
+ .bind = zaurus_bind,
+ .unbind = usbnet_cdc_unbind,
+ .tx_fixup = zaurus_tx_fixup,
+};
+#define OLYMPUS_MXL_INFO ((unsigned long)&olympus_mxl_info)
+
+
+/* Some more recent products using Lineo/Belcarra code will wrongly claim
+ * CDC MDLM conformance. They aren't conformant: data endpoints live
+ * in the control interface, there's no data interface, and it's not used
+ * to talk to a cell phone radio. But at least we can detect these two
+ * pseudo-classes, rather than growing this product list with entries for
+ * each new nonconformant product (sigh).
+ */
+static const u8 safe_guid[16] = {
+ 0x5d, 0x34, 0xcf, 0x66, 0x11, 0x18, 0x11, 0xd6,
+ 0xa2, 0x1a, 0x00, 0x01, 0x02, 0xca, 0x9a, 0x7f,
+};
+static const u8 blan_guid[16] = {
+ 0x74, 0xf0, 0x3d, 0xbd, 0x1e, 0xc1, 0x44, 0x70,
+ 0xa3, 0x67, 0x71, 0x34, 0xc9, 0xf5, 0x54, 0x37,
+};
+
+static int blan_mdlm_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+ u8 *buf = intf->cur_altsetting->extra;
+ int len = intf->cur_altsetting->extralen;
+ struct usb_cdc_mdlm_desc *desc = NULL;
+ struct usb_cdc_mdlm_detail_desc *detail = NULL;
+
+ while (len > 3) {
+ if (buf [1] != USB_DT_CS_INTERFACE)
+ goto next_desc;
+
+ /* use bDescriptorSubType, and just verify that we get a
+ * "BLAN" (or "SAFE") descriptor.
+ */
+ switch (buf [2]) {
+ case USB_CDC_MDLM_TYPE:
+ if (desc) {
+ dev_dbg(&intf->dev, "extra MDLM\n");
+ goto bad_desc;
+ }
+ desc = (void *) buf;
+ if (desc->bLength != sizeof *desc) {
+ dev_dbg(&intf->dev, "MDLM len %u\n",
+ desc->bLength);
+ goto bad_desc;
+ }
+ /* expect bcdVersion 1.0, ignore */
+ if (memcmp(&desc->bGUID, blan_guid, 16)
+ && memcmp(&desc->bGUID, safe_guid, 16) ) {
+ /* hey, this one might _really_ be MDLM! */
+ dev_dbg(&intf->dev, "MDLM guid\n");
+ goto bad_desc;
+ }
+ break;
+ case USB_CDC_MDLM_DETAIL_TYPE:
+ if (detail) {
+ dev_dbg(&intf->dev, "extra MDLM detail\n");
+ goto bad_desc;
+ }
+ detail = (void *) buf;
+ switch (detail->bGuidDescriptorType) {
+ case 0: /* "SAFE" */
+ if (detail->bLength != (sizeof *detail + 2))
+ goto bad_detail;
+ break;
+ case 1: /* "BLAN" */
+ if (detail->bLength != (sizeof *detail + 3))
+ goto bad_detail;
+ break;
+ default:
+ goto bad_detail;
+ }
+
+ /* assuming we either noticed BLAN already, or will
+ * find it soon, there are some data bytes here:
+ * - bmNetworkCapabilities (unused)
+ * - bmDataCapabilities (bits, see below)
+ * - bPad (ignored, for PADAFTER -- BLAN-only)
+ * bits are:
+ * - 0x01 -- Zaurus framing (add CRC)
+ * - 0x02 -- PADBEFORE (CRC includes some padding)
+ * - 0x04 -- PADAFTER (some padding after CRC)
+ * - 0x08 -- "fermat" packet mangling (for hw bugs)
+ * the PADBEFORE appears not to matter; we interop
+ * with devices that use it and those that don't.
+ */
+ if ((detail->bDetailData[1] & ~0x02) != 0x01) {
+ /* bmDataCapabilities == 0 would be fine too,
+ * but framing is minidriver-coupled for now.
+ */
+bad_detail:
+ dev_dbg(&intf->dev,
+ "bad MDLM detail, %d %d %d\n",
+ detail->bLength,
+ detail->bDetailData[0],
+ detail->bDetailData[2]);
+ goto bad_desc;
+ }
+
+ /* same extra framing as for non-BLAN mode */
+ dev->net->hard_header_len += 6;
+ dev->rx_urb_size = dev->net->hard_header_len
+ + dev->net->mtu;
+ break;
+ }
+next_desc:
+ len -= buf [0]; /* bLength */
+ buf += buf [0];
+ }
+
+ if (!desc || !detail) {
+ dev_dbg(&intf->dev, "missing cdc mdlm %s%sdescriptor\n",
+ desc ? "" : "func ",
+ detail ? "" : "detail ");
+ goto bad_desc;
+ }
+
+ /* There's probably a CDC Ethernet descriptor there, but we can't
+ * rely on the Ethernet address it provides since not all vendors
+ * bother to make it unique. Likewise there's no point in tracking
+ * of the CDC event notifications.
+ */
+ return usbnet_get_endpoints(dev, intf);
+
+bad_desc:
+ dev_info(&dev->udev->dev, "unsupported MDLM descriptors\n");
+ return -ENODEV;
+}
+
+static const struct driver_info bogus_mdlm_info = {
+ .description = "pseudo-MDLM (BLAN) device",
+ .flags = FLAG_FRAMING_Z,
+ .check_connect = always_connected,
+ .tx_fixup = zaurus_tx_fixup,
+ .bind = blan_mdlm_bind,
+};
+
+static const struct usb_device_id products [] = {
+#define ZAURUS_MASTER_INTERFACE \
+ .bInterfaceClass = USB_CLASS_COMM, \
+ .bInterfaceSubClass = USB_CDC_SUBCLASS_ETHERNET, \
+ .bInterfaceProtocol = USB_CDC_PROTO_NONE
+
+/* SA-1100 based Sharp Zaurus ("collie"), or compatible. */
+{
+ .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
+ | USB_DEVICE_ID_MATCH_DEVICE,
+ .idVendor = 0x04DD,
+ .idProduct = 0x8004,
+ ZAURUS_MASTER_INTERFACE,
+ .driver_info = ZAURUS_STRONGARM_INFO,
+},
+
+/* PXA-2xx based models are also lying-about-cdc. If you add any
+ * more devices that claim to be CDC Ethernet, make sure they get
+ * added to the blacklist in cdc_ether too.
+ *
+ * NOTE: OpenZaurus versions with 2.6 kernels won't use these entries,
+ * unlike the older ones with 2.4 "embedix" kernels.
+ */
+{
+ .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
+ | USB_DEVICE_ID_MATCH_DEVICE,
+ .idVendor = 0x04DD,
+ .idProduct = 0x8005, /* A-300 */
+ ZAURUS_MASTER_INTERFACE,
+ .driver_info = ZAURUS_PXA_INFO,
+}, {
+ .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
+ | USB_DEVICE_ID_MATCH_DEVICE,
+ .idVendor = 0x04DD,
+ .idProduct = 0x8006, /* B-500/SL-5600 */
+ ZAURUS_MASTER_INTERFACE,
+ .driver_info = ZAURUS_PXA_INFO,
+}, {
+ .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
+ | USB_DEVICE_ID_MATCH_DEVICE,
+ .idVendor = 0x04DD,
+ .idProduct = 0x8007, /* C-700 */
+ ZAURUS_MASTER_INTERFACE,
+ .driver_info = ZAURUS_PXA_INFO,
+}, {
+ .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
+ | USB_DEVICE_ID_MATCH_DEVICE,
+ .idVendor = 0x04DD,
+ .idProduct = 0x9031, /* C-750 C-760 */
+ ZAURUS_MASTER_INTERFACE,
+ .driver_info = ZAURUS_PXA_INFO,
+}, {
+ .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
+ | USB_DEVICE_ID_MATCH_DEVICE,
+ .idVendor = 0x04DD,
+ .idProduct = 0x9032, /* SL-6000 */
+ ZAURUS_MASTER_INTERFACE,
+ .driver_info = ZAURUS_PXA_INFO,
+}, {
+ .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
+ | USB_DEVICE_ID_MATCH_DEVICE,
+ .idVendor = 0x04DD,
+ /* reported with some C860 units */
+ .idProduct = 0x9050, /* C-860 */
+ ZAURUS_MASTER_INTERFACE,
+ .driver_info = ZAURUS_PXA_INFO,
+},
+
+
+/* At least some of the newest PXA units have very different lies about
+ * their standards support: they claim to be cell phones offering
+ * direct access to their radios! (No, they don't conform to CDC MDLM.)
+ */
+{
+ USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_MDLM,
+ USB_CDC_PROTO_NONE),
+ .driver_info = (unsigned long) &bogus_mdlm_info,
+},
+
+/* Olympus has some models with a Zaurus-compatible option.
+ * R-1000 uses a FreeScale i.MXL cpu (ARMv4T)
+ */
+{
+ .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
+ | USB_DEVICE_ID_MATCH_DEVICE,
+ .idVendor = 0x07B4,
+ .idProduct = 0x0F02, /* R-1000 */
+ ZAURUS_MASTER_INTERFACE,
+ .driver_info = OLYMPUS_MXL_INFO,
+},
+ { }, // END
+};
+MODULE_DEVICE_TABLE(usb, products);
+
+static struct usb_driver zaurus_driver = {
+ .name = "zaurus",
+ .id_table = products,
+ .probe = usbnet_probe,
+ .disconnect = usbnet_disconnect,
+ .suspend = usbnet_suspend,
+ .resume = usbnet_resume,
+};
+
+static int __init zaurus_init(void)
+{
+ return usb_register(&zaurus_driver);
+}
+module_init(zaurus_init);
+
+static void __exit zaurus_exit(void)
+{
+ usb_deregister(&zaurus_driver);
+}
+module_exit(zaurus_exit);
+
+MODULE_AUTHOR("Pavel Machek, David Brownell");
+MODULE_DESCRIPTION("Sharp Zaurus PDA, and compatible products");
+MODULE_LICENSE("GPL");