ARM: at91: add at91sam9260 DT support
The at91sam9260 and at91sam9g20 share most of the same IP.
So udpate the node property in the at91sam9g20 only.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi
new file mode 100644
index 0000000..f4605ff
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9260.dtsi
@@ -0,0 +1,238 @@
+/*
+ * at91sam9260.dtsi - Device Tree Include file for AT91SAM9260 family SoC
+ *
+ * Copyright (C) 2011 Atmel,
+ * 2011 Nicolas Ferre <nicolas.ferre@atmel.com>,
+ * 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ model = "Atmel AT91SAM9260 family SoC";
+ compatible = "atmel,at91sam9260";
+ interrupt-parent = <&aic>;
+
+ aliases {
+ serial0 = &dbgu;
+ serial1 = &usart0;
+ serial2 = &usart1;
+ serial3 = &usart2;
+ serial4 = &usart3;
+ serial5 = &usart4;
+ serial6 = &usart5;
+ gpio0 = &pioA;
+ gpio1 = &pioB;
+ gpio2 = &pioC;
+ tcb0 = &tcb0;
+ tcb1 = &tcb1;
+ };
+ cpus {
+ cpu@0 {
+ compatible = "arm,arm926ejs";
+ };
+ };
+
+ memory {
+ reg = <0x20000000 0x04000000>;
+ };
+
+ ahb {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ apb {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ aic: interrupt-controller@fffff000 {
+ #interrupt-cells = <2>;
+ compatible = "atmel,at91rm9200-aic";
+ interrupt-controller;
+ reg = <0xfffff000 0x200>;
+ };
+
+ ramc0: ramc@ffffea00 {
+ compatible = "atmel,at91sam9260-sdramc";
+ reg = <0xffffea00 0x200>;
+ };
+
+ pmc: pmc@fffffc00 {
+ compatible = "atmel,at91rm9200-pmc";
+ reg = <0xfffffc00 0x100>;
+ };
+
+ rstc@fffffd00 {
+ compatible = "atmel,at91sam9260-rstc";
+ reg = <0xfffffd00 0x10>;
+ };
+
+ shdwc@fffffd10 {
+ compatible = "atmel,at91sam9260-shdwc";
+ reg = <0xfffffd10 0x10>;
+ };
+
+ pit: timer@fffffd30 {
+ compatible = "atmel,at91sam9260-pit";
+ reg = <0xfffffd30 0xf>;
+ interrupts = <1 4>;
+ };
+
+ tcb0: timer@fffa0000 {
+ compatible = "atmel,at91rm9200-tcb";
+ reg = <0xfffa0000 0x100>;
+ interrupts = <17 4 18 4 19 4>;
+ };
+
+ tcb1: timer@fffdc000 {
+ compatible = "atmel,at91rm9200-tcb";
+ reg = <0xfffdc000 0x100>;
+ interrupts = <26 4 27 4 28 4>;
+ };
+
+ pioA: gpio@fffff400 {
+ compatible = "atmel,at91rm9200-gpio";
+ reg = <0xfffff400 0x100>;
+ interrupts = <2 4>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ };
+
+ pioB: gpio@fffff600 {
+ compatible = "atmel,at91rm9200-gpio";
+ reg = <0xfffff600 0x100>;
+ interrupts = <3 4>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ };
+
+ pioC: gpio@fffff800 {
+ compatible = "atmel,at91rm9200-gpio";
+ reg = <0xfffff800 0x100>;
+ interrupts = <4 4>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ };
+
+ dbgu: serial@fffff200 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xfffff200 0x200>;
+ interrupts = <1 4>;
+ status = "disabled";
+ };
+
+ usart0: serial@fffb0000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xfffb0000 0x200>;
+ interrupts = <6 4>;
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ status = "disabled";
+ };
+
+ usart1: serial@fffb4000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xfffb4000 0x200>;
+ interrupts = <7 4>;
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ status = "disabled";
+ };
+
+ usart2: serial@fffb8000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xfffb8000 0x200>;
+ interrupts = <8 4>;
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ status = "disabled";
+ };
+
+ usart3: serial@fffd0000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xfffd0000 0x200>;
+ interrupts = <23 4>;
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ status = "disabled";
+ };
+
+ usart4: serial@fffd4000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xfffd4000 0x200>;
+ interrupts = <24 4>;
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ status = "disabled";
+ };
+
+ usart5: serial@fffd8000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xfffd8000 0x200>;
+ interrupts = <25 4>;
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ status = "disabled";
+ };
+
+ macb0: ethernet@fffc4000 {
+ compatible = "cdns,at32ap7000-macb", "cdns,macb";
+ reg = <0xfffc4000 0x100>;
+ interrupts = <21 4>;
+ status = "disabled";
+ };
+
+ usb1: gadget@fffa4000 {
+ compatible = "atmel,at91rm9200-udc";
+ reg = <0xfffa4000 0x4000>;
+ interrupts = <10 4>;
+ status = "disabled";
+ };
+ };
+
+ nand0: nand@40000000 {
+ compatible = "atmel,at91rm9200-nand";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x40000000 0x10000000
+ 0xffffe800 0x200
+ >;
+ atmel,nand-addr-offset = <21>;
+ atmel,nand-cmd-offset = <22>;
+ gpios = <&pioC 13 0
+ &pioC 14 0
+ 0
+ >;
+ status = "disabled";
+ };
+
+ usb0: ohci@00500000 {
+ compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+ reg = <0x00500000 0x100000>;
+ interrupts = <20 4>;
+ status = "disabled";
+ };
+ };
+
+ i2c@0 {
+ compatible = "i2c-gpio";
+ gpios = <&pioA 23 0 /* sda */
+ &pioA 24 0 /* scl */
+ >;
+ i2c-gpio,sda-open-drain;
+ i2c-gpio,scl-open-drain;
+ i2c-gpio,delay-us = <2>; /* ~100 kHz */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+};