Merge master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6: (38 commits)
sh: R7785RP board updates.
sh: Update r7780rp defconfig.
sh: Add die chain notifiers.
sh: Fix APM emulation on hp6xx.
sh: Wire up more IRQs for SH7709.
sh: Solution Engine 7722 board support.
sh: Fix r7780rp build.
sh: kdump support.
sh: Move clock reporting to its own proc entry.
sh: Solution Engine SH7705 board and CPU updates.
serial: sh-sci: Fix module clock refcount for serial console.
serial: sh-sci: Fix module clock refcounting.
sh: SH7722 clock framework support.
sh: hp6xx pata_platform support.
sh: Obey CONFIG_HZ for HZ definition.
sh: Fix fstatat64() syscall.
sh: se7780 PCI support.
sh: SH7780 Solution Engine board support.
sh: Add a dummy SH-4 PCIC fixup.
sh: Tidy up L-BOX area5 addresses.
...
diff --git a/Documentation/blackfin/00-INDEX b/Documentation/blackfin/00-INDEX
new file mode 100644
index 0000000..7cb3b35
--- /dev/null
+++ b/Documentation/blackfin/00-INDEX
@@ -0,0 +1,11 @@
+00-INDEX
+ - This file
+
+cache-lock.txt
+ - HOWTO for blackfin cache locking.
+
+cachefeatures.txt
+ - Supported cache features.
+
+Filesystems
+ - Requirements for mounting the root file system.
diff --git a/Documentation/blackfin/Filesystems b/Documentation/blackfin/Filesystems
new file mode 100644
index 0000000..51260a1
--- /dev/null
+++ b/Documentation/blackfin/Filesystems
@@ -0,0 +1,169 @@
+/*
+ * File: Documentation/blackfin/Filesystems
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description: This file contains the simple DMA Implementation for Blackfin
+ *
+ * Rev: $Id: Filesystems 2384 2006-11-01 04:12:43Z magicyang $
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ */
+
+ How to mount the root file system in uClinux/Blackfin
+ -----------------------------------------------------
+
+1 Mounting EXT3 File system.
+ ------------------------
+
+ Creating an EXT3 File system for uClinux/Blackfin:
+
+
+Please follow the steps to form the EXT3 File system and mount the same as root
+file system.
+
+a Make an ext3 file system as large as you want the final root file
+ system.
+
+ mkfs.ext3 /dev/ram0 <your-rootfs-size-in-1k-blocks>
+
+b Mount this Empty file system on a free directory as:
+
+ mount -t ext3 /dev/ram0 ./test
+ where ./test is the empty directory.
+
+c Copy your root fs directory that you have so carefully made over.
+
+ cp -af /tmp/my_final_rootfs_files/* ./test
+
+ (For ex: cp -af uClinux-dist/romfs/* ./test)
+
+d If you have done everything right till now you should be able to see
+ the required "root" dir's (that's etc, root, bin, lib, sbin...)
+
+e Now unmount the file system
+
+ umount ./test
+
+f Create the root file system image.
+
+ dd if=/dev/ram0 bs=1k count=<your-rootfs-size-in-1k-blocks> \
+ > ext3fs.img
+
+
+Now you have to tell the kernel that will be mounting this file system as
+rootfs.
+So do a make menuconfig under kernel and select the Ext3 journaling file system
+support under File system --> submenu.
+
+
+2. Mounting EXT2 File system.
+ -------------------------
+
+By default the ext2 file system image will be created if you invoke make from
+the top uClinux-dist directory.
+
+
+3. Mounting CRAMFS File System
+ ----------------------------
+
+To create a CRAMFS file system image execute the command
+
+ mkfs.cramfs ./test cramfs.img
+
+ where ./test is the target directory.
+
+
+4. Mounting ROMFS File System
+ --------------------------
+
+To create a ROMFS file system image execute the command
+
+ genromfs -v -V "ROMdisk" -f romfs.img -d ./test
+
+ where ./test is the target directory
+
+
+5. Mounting the JFFS2 Filesystem
+ -----------------------------
+
+To create a compressed JFFS filesystem (JFFS2), please execute the command
+
+ mkfs.jffs2 -d ./test -o jffs2.img
+
+ where ./test is the target directory.
+
+However, please make sure the following is in your kernel config.
+
+/*
+ * RAM/ROM/Flash chip drivers
+ */
+#define CONFIG_MTD_CFI 1
+#define CONFIG_MTD_ROM 1
+/*
+ * Mapping drivers for chip access
+ */
+#define CONFIG_MTD_COMPLEX_MAPPINGS 1
+#define CONFIG_MTD_BF533 1
+#undef CONFIG_MTD_UCLINUX
+
+Through the u-boot boot loader, use the jffs2.img in the corresponding
+partition made in linux-2.6.x/drivers/mtd/maps/bf533_flash.c.
+
+NOTE - Currently the Flash driver is available only for EZKIT. Watch out for a
+ STAMP driver soon.
+
+
+6. Mounting the NFS File system
+ -----------------------------
+
+ For mounting the NFS please do the following in the kernel config.
+
+ In Networking Support --> Networking options --> TCP/IP networking -->
+ IP: kernel level autoconfiguration
+
+ Enable BOOTP Support.
+
+ In Kernel hacking --> Compiled-in kernel boot parameter add the following
+
+ root=/dev/nfs rw ip=bootp
+
+ In File system --> Network File system, Enable
+
+ NFS file system support --> NFSv3 client support
+ Root File system on NFS
+
+ in uClibc menuconfig, do the following
+ In Networking Support
+ enable Remote Procedure Call (RPC) support
+ Full RPC Support
+
+ On the Host side, ensure that /etc/dhcpd.conf looks something like this
+
+ ddns-update-style ad-hoc;
+ allow bootp;
+ subnet 10.100.4.0 netmask 255.255.255.0 {
+ default-lease-time 122209600;
+ max-lease-time 31557600;
+ group {
+ host bf533 {
+ hardware ethernet 00:CF:52:49:C3:01;
+ fixed-address 10.100.4.50;
+ option root-path "/home/nfsmount";
+ }
+ }
+
+ ensure that /etc/exports looks something like this
+ /home/nfsmount *(rw,no_root_squash,no_all_squash)
+
+ run the following commands as root (may differ depending on your
+ distribution) :
+ - service nfs start
+ - service portmap start
+ - service dhcpd start
+ - /usr/sbin/exportfs
diff --git a/Documentation/blackfin/cache-lock.txt b/Documentation/blackfin/cache-lock.txt
new file mode 100644
index 0000000..88ba1e6
--- /dev/null
+++ b/Documentation/blackfin/cache-lock.txt
@@ -0,0 +1,48 @@
+/*
+ * File: Documentation/blackfin/cache-lock.txt
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description: This file contains the simple DMA Implementation for Blackfin
+ *
+ * Rev: $Id: cache-lock.txt 2384 2006-11-01 04:12:43Z magicyang $
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ */
+
+How to lock your code in cache in uClinux/blackfin
+--------------------------------------------------
+
+There are only a few steps required to lock your code into the cache.
+Currently you can lock the code by Way.
+
+Below are the interface provided for locking the cache.
+
+
+1. cache_grab_lock(int Ways);
+
+This function grab the lock for locking your code into the cache specified
+by Ways.
+
+
+2. cache_lock(int Ways);
+
+This function should be called after your critical code has been executed.
+Once the critical code exits, the code is now loaded into the cache. This
+function locks the code into the cache.
+
+
+So, the example sequence will be:
+
+ cache_grab_lock(WAY0_L); /* Grab the lock */
+
+ critical_code(); /* Execute the code of interest */
+
+ cache_lock(WAY0_L); /* Lock the cache */
+
+Where WAY0_L signifies WAY0 locking.
diff --git a/Documentation/blackfin/cachefeatures.txt b/Documentation/blackfin/cachefeatures.txt
new file mode 100644
index 0000000..0fbec23
--- /dev/null
+++ b/Documentation/blackfin/cachefeatures.txt
@@ -0,0 +1,65 @@
+/*
+ * File: Documentation/blackfin/cachefeatures.txt
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description: This file contains the simple DMA Implementation for Blackfin
+ *
+ * Rev: $Id: cachefeatures.txt 2384 2006-11-01 04:12:43Z magicyang $
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ */
+
+ - Instruction and Data cache initialization.
+ icache_init();
+ dcache_init();
+
+ - Instruction and Data cache Invalidation Routines, when flushing the
+ same is not required.
+ _icache_invalidate();
+ _dcache_invalidate();
+
+ Also, for invalidating the entire instruction and data cache, the below
+ routines are provided (another method for invalidation, refer page no 267 and 287 of
+ ADSP-BF533 Hardware Reference manual)
+
+ invalidate_entire_dcache();
+ invalidate_entire_icache();
+
+ -External Flushing of Instruction and data cache routines.
+
+ flush_instruction_cache();
+ flush_data_cache();
+
+ - Internal Flushing of Instruction and Data Cache.
+
+ icplb_flush();
+ dcplb_flush();
+
+ - Locking the cache.
+
+ cache_grab_lock();
+ cache_lock();
+
+ Please refer linux-2.6.x/Documentation/blackfin/cache-lock.txt for how to
+ lock the cache.
+
+ Locking the cache is optional feature.
+
+ - Miscellaneous cache functions.
+
+ flush_cache_all();
+ flush_cache_mm();
+ invalidate_dcache_range();
+ flush_dcache_range();
+ flush_dcache_page();
+ flush_cache_range();
+ flush_cache_page();
+ invalidate_dcache_range();
+ flush_page_to_ram();
+
diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt
index 7aaf09b..3f4b226 100644
--- a/Documentation/filesystems/proc.txt
+++ b/Documentation/filesystems/proc.txt
@@ -122,21 +122,22 @@
Table 1-1: Process specific entries in /proc
..............................................................................
- File Content
- cmdline Command line arguments
- cpu Current and last cpu in which it was executed (2.4)(smp)
- cwd Link to the current working directory
- environ Values of environment variables
- exe Link to the executable of this process
- fd Directory, which contains all file descriptors
- maps Memory maps to executables and library files (2.4)
- mem Memory held by this process
- root Link to the root directory of this process
- stat Process status
- statm Process memory status information
- status Process status in human readable form
- wchan If CONFIG_KALLSYMS is set, a pre-decoded wchan
- smaps Extension based on maps, presenting the rss size for each mapped file
+ File Content
+ clear_refs Clears page referenced bits shown in smaps output
+ cmdline Command line arguments
+ cpu Current and last cpu in which it was executed (2.4)(smp)
+ cwd Link to the current working directory
+ environ Values of environment variables
+ exe Link to the executable of this process
+ fd Directory, which contains all file descriptors
+ maps Memory maps to executables and library files (2.4)
+ mem Memory held by this process
+ root Link to the root directory of this process
+ stat Process status
+ statm Process memory status information
+ status Process status in human readable form
+ wchan If CONFIG_KALLSYMS is set, a pre-decoded wchan
+ smaps Extension based on maps, the rss size for each mapped file
..............................................................................
For example, to get the status information of a process, all you have to do is
diff --git a/Documentation/pcmcia/driver.txt b/Documentation/pcmcia/driver.txt
new file mode 100644
index 0000000..0ac1679
--- /dev/null
+++ b/Documentation/pcmcia/driver.txt
@@ -0,0 +1,30 @@
+PCMCIA Driver
+-------------
+
+
+sysfs
+-----
+
+New PCMCIA IDs may be added to a device driver pcmcia_device_id table at
+runtime as shown below:
+
+echo "match_flags manf_id card_id func_id function device_no \
+prod_id_hash[0] prod_id_hash[1] prod_id_hash[2] prod_id_hash[3]" > \
+/sys/bus/pcmcia/drivers/{driver}/new_id
+
+All fields are passed in as hexadecimal values (no leading 0x).
+The meaning is described in the PCMCIA specification, the match_flags is
+a bitwise or-ed combination from PCMCIA_DEV_ID_MATCH_* constants
+defined in include/linux/mod_devicetable.h.
+
+Once added, the driver probe routine will be invoked for any unclaimed
+PCMCIA device listed in its (newly updated) pcmcia_device_id list.
+
+A common use-case is to add a new device according to the manufacturer ID
+and the card ID (form the manf_id and card_id file in the device tree).
+For this, just use:
+
+echo "0x3 manf_id card_id 0 0 0 0 0 0 0" > \
+ /sys/bus/pcmcia/drivers/{driver}/new_id
+
+after loading the driver.
diff --git a/Documentation/power/interface.txt b/Documentation/power/interface.txt
index 8c5b41b..fd5192a 100644
--- a/Documentation/power/interface.txt
+++ b/Documentation/power/interface.txt
@@ -34,8 +34,12 @@
we are able to look in the log messages and work out, for example, which code
is being slow and which device drivers are misbehaving.
-Reading from this file will display what the mode is currently set
-to. Writing to this file will accept one of
+Reading from this file will display all supported modes and the currently
+selected one in brackets, for example
+
+ [shutdown] reboot test testproc
+
+Writing to this file will accept one of
'platform' (only if the platform supports it)
'shutdown'
diff --git a/Documentation/sysctl/vm.txt b/Documentation/sysctl/vm.txt
index e96a341..1d19256 100644
--- a/Documentation/sysctl/vm.txt
+++ b/Documentation/sysctl/vm.txt
@@ -197,11 +197,22 @@
panic_on_oom
-This enables or disables panic on out-of-memory feature. If this is set to 1,
-the kernel panics when out-of-memory happens. If this is set to 0, the kernel
-will kill some rogue process, called oom_killer. Usually, oom_killer can kill
-rogue processes and system will survive. If you want to panic the system
-rather than killing rogue processes, set this to 1.
+This enables or disables panic on out-of-memory feature.
+
+If this is set to 0, the kernel will kill some rogue process,
+called oom_killer. Usually, oom_killer can kill rogue processes and
+system will survive.
+
+If this is set to 1, the kernel panics when out-of-memory happens.
+However, if a process limits using nodes by mempolicy/cpusets,
+and those nodes become memory exhaustion status, one process
+may be killed by oom-killer. No panic occurs in this case.
+Because other nodes' memory may be free. This means system total status
+may be not fatal yet.
+
+If this is set to 2, the kernel panics compulsorily even on the
+above-mentioned.
The default value is 0.
-
+1 and 2 are for failover of clustering. Please select either
+according to your policy of failover.
diff --git a/Documentation/vm/slabinfo.c b/Documentation/vm/slabinfo.c
new file mode 100644
index 0000000..41710cc
--- /dev/null
+++ b/Documentation/vm/slabinfo.c
@@ -0,0 +1,943 @@
+/*
+ * Slabinfo: Tool to get reports about slabs
+ *
+ * (C) 2007 sgi, Christoph Lameter <clameter@sgi.com>
+ *
+ * Compile by:
+ *
+ * gcc -o slabinfo slabinfo.c
+ */
+#include <stdio.h>
+#include <stdlib.h>
+#include <sys/types.h>
+#include <dirent.h>
+#include <string.h>
+#include <unistd.h>
+#include <stdarg.h>
+#include <getopt.h>
+#include <regex.h>
+
+#define MAX_SLABS 500
+#define MAX_ALIASES 500
+#define MAX_NODES 1024
+
+struct slabinfo {
+ char *name;
+ int alias;
+ int refs;
+ int aliases, align, cache_dma, cpu_slabs, destroy_by_rcu;
+ int hwcache_align, object_size, objs_per_slab;
+ int sanity_checks, slab_size, store_user, trace;
+ int order, poison, reclaim_account, red_zone;
+ unsigned long partial, objects, slabs;
+ int numa[MAX_NODES];
+ int numa_partial[MAX_NODES];
+} slabinfo[MAX_SLABS];
+
+struct aliasinfo {
+ char *name;
+ char *ref;
+ struct slabinfo *slab;
+} aliasinfo[MAX_ALIASES];
+
+int slabs = 0;
+int aliases = 0;
+int alias_targets = 0;
+int highest_node = 0;
+
+char buffer[4096];
+
+int show_alias = 0;
+int show_slab = 0;
+int skip_zero = 1;
+int show_numa = 0;
+int show_track = 0;
+int show_first_alias = 0;
+int validate = 0;
+int shrink = 0;
+int show_inverted = 0;
+int show_single_ref = 0;
+int show_totals = 0;
+int sort_size = 0;
+
+int page_size;
+
+regex_t pattern;
+
+void fatal(const char *x, ...)
+{
+ va_list ap;
+
+ va_start(ap, x);
+ vfprintf(stderr, x, ap);
+ va_end(ap);
+ exit(1);
+}
+
+void usage(void)
+{
+ printf("slabinfo [-ahnpvtsz] [slab-regexp]\n"
+ "-a|--aliases Show aliases\n"
+ "-h|--help Show usage information\n"
+ "-n|--numa Show NUMA information\n"
+ "-s|--shrink Shrink slabs\n"
+ "-v|--validate Validate slabs\n"
+ "-t|--tracking Show alloc/free information\n"
+ "-T|--Totals Show summary information\n"
+ "-l|--slabs Show slabs\n"
+ "-S|--Size Sort by size\n"
+ "-z|--zero Include empty slabs\n"
+ "-f|--first-alias Show first alias\n"
+ "-i|--inverted Inverted list\n"
+ "-1|--1ref Single reference\n"
+ );
+}
+
+unsigned long read_obj(char *name)
+{
+ FILE *f = fopen(name, "r");
+
+ if (!f)
+ buffer[0] = 0;
+ else {
+ if (!fgets(buffer,sizeof(buffer), f))
+ buffer[0] = 0;
+ fclose(f);
+ if (buffer[strlen(buffer)] == '\n')
+ buffer[strlen(buffer)] = 0;
+ }
+ return strlen(buffer);
+}
+
+
+/*
+ * Get the contents of an attribute
+ */
+unsigned long get_obj(char *name)
+{
+ if (!read_obj(name))
+ return 0;
+
+ return atol(buffer);
+}
+
+unsigned long get_obj_and_str(char *name, char **x)
+{
+ unsigned long result = 0;
+ char *p;
+
+ *x = NULL;
+
+ if (!read_obj(name)) {
+ x = NULL;
+ return 0;
+ }
+ result = strtoul(buffer, &p, 10);
+ while (*p == ' ')
+ p++;
+ if (*p)
+ *x = strdup(p);
+ return result;
+}
+
+void set_obj(struct slabinfo *s, char *name, int n)
+{
+ char x[100];
+
+ sprintf(x, "%s/%s", s->name, name);
+
+ FILE *f = fopen(x, "w");
+
+ if (!f)
+ fatal("Cannot write to %s\n", x);
+
+ fprintf(f, "%d\n", n);
+ fclose(f);
+}
+
+/*
+ * Put a size string together
+ */
+int store_size(char *buffer, unsigned long value)
+{
+ unsigned long divisor = 1;
+ char trailer = 0;
+ int n;
+
+ if (value > 1000000000UL) {
+ divisor = 100000000UL;
+ trailer = 'G';
+ } else if (value > 1000000UL) {
+ divisor = 100000UL;
+ trailer = 'M';
+ } else if (value > 1000UL) {
+ divisor = 100;
+ trailer = 'K';
+ }
+
+ value /= divisor;
+ n = sprintf(buffer, "%ld",value);
+ if (trailer) {
+ buffer[n] = trailer;
+ n++;
+ buffer[n] = 0;
+ }
+ if (divisor != 1) {
+ memmove(buffer + n - 2, buffer + n - 3, 4);
+ buffer[n-2] = '.';
+ n++;
+ }
+ return n;
+}
+
+void decode_numa_list(int *numa, char *t)
+{
+ int node;
+ int nr;
+
+ memset(numa, 0, MAX_NODES * sizeof(int));
+
+ while (*t == 'N') {
+ t++;
+ node = strtoul(t, &t, 10);
+ if (*t == '=') {
+ t++;
+ nr = strtoul(t, &t, 10);
+ numa[node] = nr;
+ if (node > highest_node)
+ highest_node = node;
+ }
+ while (*t == ' ')
+ t++;
+ }
+}
+
+void slab_validate(struct slabinfo *s)
+{
+ set_obj(s, "validate", 1);
+}
+
+void slab_shrink(struct slabinfo *s)
+{
+ set_obj(s, "shrink", 1);
+}
+
+int line = 0;
+
+void first_line(void)
+{
+ printf("Name Objects Objsize Space "
+ "Slabs/Part/Cpu O/S O %%Fr %%Ef Flg\n");
+}
+
+/*
+ * Find the shortest alias of a slab
+ */
+struct aliasinfo *find_one_alias(struct slabinfo *find)
+{
+ struct aliasinfo *a;
+ struct aliasinfo *best = NULL;
+
+ for(a = aliasinfo;a < aliasinfo + aliases; a++) {
+ if (a->slab == find &&
+ (!best || strlen(best->name) < strlen(a->name))) {
+ best = a;
+ if (strncmp(a->name,"kmall", 5) == 0)
+ return best;
+ }
+ }
+ if (best)
+ return best;
+ fatal("Cannot find alias for %s\n", find->name);
+ return NULL;
+}
+
+unsigned long slab_size(struct slabinfo *s)
+{
+ return s->slabs * (page_size << s->order);
+}
+
+
+void slabcache(struct slabinfo *s)
+{
+ char size_str[20];
+ char dist_str[40];
+ char flags[20];
+ char *p = flags;
+
+ if (skip_zero && !s->slabs)
+ return;
+
+ store_size(size_str, slab_size(s));
+ sprintf(dist_str,"%lu/%lu/%d", s->slabs, s->partial, s->cpu_slabs);
+
+ if (!line++)
+ first_line();
+
+ if (s->aliases)
+ *p++ = '*';
+ if (s->cache_dma)
+ *p++ = 'd';
+ if (s->hwcache_align)
+ *p++ = 'A';
+ if (s->poison)
+ *p++ = 'P';
+ if (s->reclaim_account)
+ *p++ = 'a';
+ if (s->red_zone)
+ *p++ = 'Z';
+ if (s->sanity_checks)
+ *p++ = 'F';
+ if (s->store_user)
+ *p++ = 'U';
+ if (s->trace)
+ *p++ = 'T';
+
+ *p = 0;
+ printf("%-21s %8ld %7d %8s %14s %4d %1d %3ld %3ld %s\n",
+ s->name, s->objects, s->object_size, size_str, dist_str,
+ s->objs_per_slab, s->order,
+ s->slabs ? (s->partial * 100) / s->slabs : 100,
+ s->slabs ? (s->objects * s->object_size * 100) /
+ (s->slabs * (page_size << s->order)) : 100,
+ flags);
+}
+
+void slab_numa(struct slabinfo *s)
+{
+ int node;
+
+ if (!highest_node)
+ fatal("No NUMA information available.\n");
+
+ if (skip_zero && !s->slabs)
+ return;
+
+ if (!line) {
+ printf("\nSlab Node ");
+ for(node = 0; node <= highest_node; node++)
+ printf(" %4d", node);
+ printf("\n----------------------");
+ for(node = 0; node <= highest_node; node++)
+ printf("-----");
+ printf("\n");
+ }
+ printf("%-21s ", s->name);
+ for(node = 0; node <= highest_node; node++) {
+ char b[20];
+
+ store_size(b, s->numa[node]);
+ printf(" %4s", b);
+ }
+ printf("\n");
+ line++;
+}
+
+void show_tracking(struct slabinfo *s)
+{
+ printf("\n%s: Calls to allocate a slab object\n", s->name);
+ printf("---------------------------------------------------\n");
+ if (read_obj("alloc_calls"))
+ printf(buffer);
+
+ printf("%s: Calls to free a slab object\n", s->name);
+ printf("-----------------------------------------------\n");
+ if (read_obj("free_calls"))
+ printf(buffer);
+
+}
+
+void totals(void)
+{
+ struct slabinfo *s;
+
+ int used_slabs = 0;
+ char b1[20], b2[20], b3[20], b4[20];
+ unsigned long long max = 1ULL << 63;
+
+ /* Object size */
+ unsigned long long min_objsize = max, max_objsize = 0, avg_objsize;
+
+ /* Number of partial slabs in a slabcache */
+ unsigned long long min_partial = max, max_partial = 0,
+ avg_partial, total_partial = 0;
+
+ /* Number of slabs in a slab cache */
+ unsigned long long min_slabs = max, max_slabs = 0,
+ avg_slabs, total_slabs = 0;
+
+ /* Size of the whole slab */
+ unsigned long long min_size = max, max_size = 0,
+ avg_size, total_size = 0;
+
+ /* Bytes used for object storage in a slab */
+ unsigned long long min_used = max, max_used = 0,
+ avg_used, total_used = 0;
+
+ /* Waste: Bytes used for alignment and padding */
+ unsigned long long min_waste = max, max_waste = 0,
+ avg_waste, total_waste = 0;
+ /* Number of objects in a slab */
+ unsigned long long min_objects = max, max_objects = 0,
+ avg_objects, total_objects = 0;
+ /* Waste per object */
+ unsigned long long min_objwaste = max,
+ max_objwaste = 0, avg_objwaste,
+ total_objwaste = 0;
+
+ /* Memory per object */
+ unsigned long long min_memobj = max,
+ max_memobj = 0, avg_memobj,
+ total_objsize = 0;
+
+ /* Percentage of partial slabs per slab */
+ unsigned long min_ppart = 100, max_ppart = 0,
+ avg_ppart, total_ppart = 0;
+
+ /* Number of objects in partial slabs */
+ unsigned long min_partobj = max, max_partobj = 0,
+ avg_partobj, total_partobj = 0;
+
+ /* Percentage of partial objects of all objects in a slab */
+ unsigned long min_ppartobj = 100, max_ppartobj = 0,
+ avg_ppartobj, total_ppartobj = 0;
+
+
+ for (s = slabinfo; s < slabinfo + slabs; s++) {
+ unsigned long long size;
+ unsigned long used;
+ unsigned long long wasted;
+ unsigned long long objwaste;
+ long long objects_in_partial_slabs;
+ unsigned long percentage_partial_slabs;
+ unsigned long percentage_partial_objs;
+
+ if (!s->slabs || !s->objects)
+ continue;
+
+ used_slabs++;
+
+ size = slab_size(s);
+ used = s->objects * s->object_size;
+ wasted = size - used;
+ objwaste = s->slab_size - s->object_size;
+
+ objects_in_partial_slabs = s->objects -
+ (s->slabs - s->partial - s ->cpu_slabs) *
+ s->objs_per_slab;
+
+ if (objects_in_partial_slabs < 0)
+ objects_in_partial_slabs = 0;
+
+ percentage_partial_slabs = s->partial * 100 / s->slabs;
+ if (percentage_partial_slabs > 100)
+ percentage_partial_slabs = 100;
+
+ percentage_partial_objs = objects_in_partial_slabs * 100
+ / s->objects;
+
+ if (percentage_partial_objs > 100)
+ percentage_partial_objs = 100;
+
+ if (s->object_size < min_objsize)
+ min_objsize = s->object_size;
+ if (s->partial < min_partial)
+ min_partial = s->partial;
+ if (s->slabs < min_slabs)
+ min_slabs = s->slabs;
+ if (size < min_size)
+ min_size = size;
+ if (wasted < min_waste)
+ min_waste = wasted;
+ if (objwaste < min_objwaste)
+ min_objwaste = objwaste;
+ if (s->objects < min_objects)
+ min_objects = s->objects;
+ if (used < min_used)
+ min_used = used;
+ if (objects_in_partial_slabs < min_partobj)
+ min_partobj = objects_in_partial_slabs;
+ if (percentage_partial_slabs < min_ppart)
+ min_ppart = percentage_partial_slabs;
+ if (percentage_partial_objs < min_ppartobj)
+ min_ppartobj = percentage_partial_objs;
+ if (s->slab_size < min_memobj)
+ min_memobj = s->slab_size;
+
+ if (s->object_size > max_objsize)
+ max_objsize = s->object_size;
+ if (s->partial > max_partial)
+ max_partial = s->partial;
+ if (s->slabs > max_slabs)
+ max_slabs = s->slabs;
+ if (size > max_size)
+ max_size = size;
+ if (wasted > max_waste)
+ max_waste = wasted;
+ if (objwaste > max_objwaste)
+ max_objwaste = objwaste;
+ if (s->objects > max_objects)
+ max_objects = s->objects;
+ if (used > max_used)
+ max_used = used;
+ if (objects_in_partial_slabs > max_partobj)
+ max_partobj = objects_in_partial_slabs;
+ if (percentage_partial_slabs > max_ppart)
+ max_ppart = percentage_partial_slabs;
+ if (percentage_partial_objs > max_ppartobj)
+ max_ppartobj = percentage_partial_objs;
+ if (s->slab_size > max_memobj)
+ max_memobj = s->slab_size;
+
+ total_partial += s->partial;
+ total_slabs += s->slabs;
+ total_size += size;
+ total_waste += wasted;
+
+ total_objects += s->objects;
+ total_used += used;
+ total_partobj += objects_in_partial_slabs;
+ total_ppart += percentage_partial_slabs;
+ total_ppartobj += percentage_partial_objs;
+
+ total_objwaste += s->objects * objwaste;
+ total_objsize += s->objects * s->slab_size;
+ }
+
+ if (!total_objects) {
+ printf("No objects\n");
+ return;
+ }
+ if (!used_slabs) {
+ printf("No slabs\n");
+ return;
+ }
+
+ /* Per slab averages */
+ avg_partial = total_partial / used_slabs;
+ avg_slabs = total_slabs / used_slabs;
+ avg_size = total_size / used_slabs;
+ avg_waste = total_waste / used_slabs;
+
+ avg_objects = total_objects / used_slabs;
+ avg_used = total_used / used_slabs;
+ avg_partobj = total_partobj / used_slabs;
+ avg_ppart = total_ppart / used_slabs;
+ avg_ppartobj = total_ppartobj / used_slabs;
+
+ /* Per object object sizes */
+ avg_objsize = total_used / total_objects;
+ avg_objwaste = total_objwaste / total_objects;
+ avg_partobj = total_partobj * 100 / total_objects;
+ avg_memobj = total_objsize / total_objects;
+
+ printf("Slabcache Totals\n");
+ printf("----------------\n");
+ printf("Slabcaches : %3d Aliases : %3d->%-3d Active: %3d\n",
+ slabs, aliases, alias_targets, used_slabs);
+
+ store_size(b1, total_size);store_size(b2, total_waste);
+ store_size(b3, total_waste * 100 / total_used);
+ printf("Memory used: %6s # Loss : %6s MRatio: %6s%%\n", b1, b2, b3);
+
+ store_size(b1, total_objects);store_size(b2, total_partobj);
+ store_size(b3, total_partobj * 100 / total_objects);
+ printf("# Objects : %6s # PartObj: %6s ORatio: %6s%%\n", b1, b2, b3);
+
+ printf("\n");
+ printf("Per Cache Average Min Max Total\n");
+ printf("---------------------------------------------------------\n");
+
+ store_size(b1, avg_objects);store_size(b2, min_objects);
+ store_size(b3, max_objects);store_size(b4, total_objects);
+ printf("#Objects %10s %10s %10s %10s\n",
+ b1, b2, b3, b4);
+
+ store_size(b1, avg_slabs);store_size(b2, min_slabs);
+ store_size(b3, max_slabs);store_size(b4, total_slabs);
+ printf("#Slabs %10s %10s %10s %10s\n",
+ b1, b2, b3, b4);
+
+ store_size(b1, avg_partial);store_size(b2, min_partial);
+ store_size(b3, max_partial);store_size(b4, total_partial);
+ printf("#PartSlab %10s %10s %10s %10s\n",
+ b1, b2, b3, b4);
+ store_size(b1, avg_ppart);store_size(b2, min_ppart);
+ store_size(b3, max_ppart);
+ store_size(b4, total_partial * 100 / total_slabs);
+ printf("%%PartSlab %10s%% %10s%% %10s%% %10s%%\n",
+ b1, b2, b3, b4);
+
+ store_size(b1, avg_partobj);store_size(b2, min_partobj);
+ store_size(b3, max_partobj);
+ store_size(b4, total_partobj);
+ printf("PartObjs %10s %10s %10s %10s\n",
+ b1, b2, b3, b4);
+
+ store_size(b1, avg_ppartobj);store_size(b2, min_ppartobj);
+ store_size(b3, max_ppartobj);
+ store_size(b4, total_partobj * 100 / total_objects);
+ printf("%% PartObj %10s%% %10s%% %10s%% %10s%%\n",
+ b1, b2, b3, b4);
+
+ store_size(b1, avg_size);store_size(b2, min_size);
+ store_size(b3, max_size);store_size(b4, total_size);
+ printf("Memory %10s %10s %10s %10s\n",
+ b1, b2, b3, b4);
+
+ store_size(b1, avg_used);store_size(b2, min_used);
+ store_size(b3, max_used);store_size(b4, total_used);
+ printf("Used %10s %10s %10s %10s\n",
+ b1, b2, b3, b4);
+
+ store_size(b1, avg_waste);store_size(b2, min_waste);
+ store_size(b3, max_waste);store_size(b4, total_waste);
+ printf("Loss %10s %10s %10s %10s\n",
+ b1, b2, b3, b4);
+
+ printf("\n");
+ printf("Per Object Average Min Max\n");
+ printf("---------------------------------------------\n");
+
+ store_size(b1, avg_memobj);store_size(b2, min_memobj);
+ store_size(b3, max_memobj);
+ printf("Memory %10s %10s %10s\n",
+ b1, b2, b3);
+ store_size(b1, avg_objsize);store_size(b2, min_objsize);
+ store_size(b3, max_objsize);
+ printf("User %10s %10s %10s\n",
+ b1, b2, b3);
+
+ store_size(b1, avg_objwaste);store_size(b2, min_objwaste);
+ store_size(b3, max_objwaste);
+ printf("Loss %10s %10s %10s\n",
+ b1, b2, b3);
+}
+
+void sort_slabs(void)
+{
+ struct slabinfo *s1,*s2;
+
+ for (s1 = slabinfo; s1 < slabinfo + slabs; s1++) {
+ for (s2 = s1 + 1; s2 < slabinfo + slabs; s2++) {
+ int result;
+
+ if (sort_size)
+ result = slab_size(s1) < slab_size(s2);
+ else
+ result = strcasecmp(s1->name, s2->name);
+
+ if (show_inverted)
+ result = -result;
+
+ if (result > 0) {
+ struct slabinfo t;
+
+ memcpy(&t, s1, sizeof(struct slabinfo));
+ memcpy(s1, s2, sizeof(struct slabinfo));
+ memcpy(s2, &t, sizeof(struct slabinfo));
+ }
+ }
+ }
+}
+
+void sort_aliases(void)
+{
+ struct aliasinfo *a1,*a2;
+
+ for (a1 = aliasinfo; a1 < aliasinfo + aliases; a1++) {
+ for (a2 = a1 + 1; a2 < aliasinfo + aliases; a2++) {
+ char *n1, *n2;
+
+ n1 = a1->name;
+ n2 = a2->name;
+ if (show_alias && !show_inverted) {
+ n1 = a1->ref;
+ n2 = a2->ref;
+ }
+ if (strcasecmp(n1, n2) > 0) {
+ struct aliasinfo t;
+
+ memcpy(&t, a1, sizeof(struct aliasinfo));
+ memcpy(a1, a2, sizeof(struct aliasinfo));
+ memcpy(a2, &t, sizeof(struct aliasinfo));
+ }
+ }
+ }
+}
+
+void link_slabs(void)
+{
+ struct aliasinfo *a;
+ struct slabinfo *s;
+
+ for (a = aliasinfo; a < aliasinfo + aliases; a++) {
+
+ for(s = slabinfo; s < slabinfo + slabs; s++)
+ if (strcmp(a->ref, s->name) == 0) {
+ a->slab = s;
+ s->refs++;
+ break;
+ }
+ if (s == slabinfo + slabs)
+ fatal("Unresolved alias %s\n", a->ref);
+ }
+}
+
+void alias(void)
+{
+ struct aliasinfo *a;
+ char *active = NULL;
+
+ sort_aliases();
+ link_slabs();
+
+ for(a = aliasinfo; a < aliasinfo + aliases; a++) {
+
+ if (!show_single_ref && a->slab->refs == 1)
+ continue;
+
+ if (!show_inverted) {
+ if (active) {
+ if (strcmp(a->slab->name, active) == 0) {
+ printf(" %s", a->name);
+ continue;
+ }
+ }
+ printf("\n%-20s <- %s", a->slab->name, a->name);
+ active = a->slab->name;
+ }
+ else
+ printf("%-20s -> %s\n", a->name, a->slab->name);
+ }
+ if (active)
+ printf("\n");
+}
+
+
+void rename_slabs(void)
+{
+ struct slabinfo *s;
+ struct aliasinfo *a;
+
+ for (s = slabinfo; s < slabinfo + slabs; s++) {
+ if (*s->name != ':')
+ continue;
+
+ if (s->refs > 1 && !show_first_alias)
+ continue;
+
+ a = find_one_alias(s);
+
+ s->name = a->name;
+ }
+}
+
+int slab_mismatch(char *slab)
+{
+ return regexec(&pattern, slab, 0, NULL, 0);
+}
+
+void read_slab_dir(void)
+{
+ DIR *dir;
+ struct dirent *de;
+ struct slabinfo *slab = slabinfo;
+ struct aliasinfo *alias = aliasinfo;
+ char *p;
+ char *t;
+ int count;
+
+ dir = opendir(".");
+ while ((de = readdir(dir))) {
+ if (de->d_name[0] == '.' ||
+ slab_mismatch(de->d_name))
+ continue;
+ switch (de->d_type) {
+ case DT_LNK:
+ alias->name = strdup(de->d_name);
+ count = readlink(de->d_name, buffer, sizeof(buffer));
+
+ if (count < 0)
+ fatal("Cannot read symlink %s\n", de->d_name);
+
+ buffer[count] = 0;
+ p = buffer + count;
+ while (p > buffer && p[-1] != '/')
+ p--;
+ alias->ref = strdup(p);
+ alias++;
+ break;
+ case DT_DIR:
+ if (chdir(de->d_name))
+ fatal("Unable to access slab %s\n", slab->name);
+ slab->name = strdup(de->d_name);
+ slab->alias = 0;
+ slab->refs = 0;
+ slab->aliases = get_obj("aliases");
+ slab->align = get_obj("align");
+ slab->cache_dma = get_obj("cache_dma");
+ slab->cpu_slabs = get_obj("cpu_slabs");
+ slab->destroy_by_rcu = get_obj("destroy_by_rcu");
+ slab->hwcache_align = get_obj("hwcache_align");
+ slab->object_size = get_obj("object_size");
+ slab->objects = get_obj("objects");
+ slab->objs_per_slab = get_obj("objs_per_slab");
+ slab->order = get_obj("order");
+ slab->partial = get_obj("partial");
+ slab->partial = get_obj_and_str("partial", &t);
+ decode_numa_list(slab->numa_partial, t);
+ slab->poison = get_obj("poison");
+ slab->reclaim_account = get_obj("reclaim_account");
+ slab->red_zone = get_obj("red_zone");
+ slab->sanity_checks = get_obj("sanity_checks");
+ slab->slab_size = get_obj("slab_size");
+ slab->slabs = get_obj_and_str("slabs", &t);
+ decode_numa_list(slab->numa, t);
+ slab->store_user = get_obj("store_user");
+ slab->trace = get_obj("trace");
+ chdir("..");
+ if (slab->name[0] == ':')
+ alias_targets++;
+ slab++;
+ break;
+ default :
+ fatal("Unknown file type %lx\n", de->d_type);
+ }
+ }
+ closedir(dir);
+ slabs = slab - slabinfo;
+ aliases = alias - aliasinfo;
+ if (slabs > MAX_SLABS)
+ fatal("Too many slabs\n");
+ if (aliases > MAX_ALIASES)
+ fatal("Too many aliases\n");
+}
+
+void output_slabs(void)
+{
+ struct slabinfo *slab;
+
+ for (slab = slabinfo; slab < slabinfo + slabs; slab++) {
+
+ if (slab->alias)
+ continue;
+
+
+ if (show_numa)
+ slab_numa(slab);
+ else
+ if (show_track)
+ show_tracking(slab);
+ else
+ if (validate)
+ slab_validate(slab);
+ else
+ if (shrink)
+ slab_shrink(slab);
+ else {
+ if (show_slab)
+ slabcache(slab);
+ }
+ }
+}
+
+struct option opts[] = {
+ { "aliases", 0, NULL, 'a' },
+ { "slabs", 0, NULL, 'l' },
+ { "numa", 0, NULL, 'n' },
+ { "zero", 0, NULL, 'z' },
+ { "help", 0, NULL, 'h' },
+ { "validate", 0, NULL, 'v' },
+ { "first-alias", 0, NULL, 'f' },
+ { "shrink", 0, NULL, 's' },
+ { "track", 0, NULL, 't'},
+ { "inverted", 0, NULL, 'i'},
+ { "1ref", 0, NULL, '1'},
+ { NULL, 0, NULL, 0 }
+};
+
+int main(int argc, char *argv[])
+{
+ int c;
+ int err;
+ char *pattern_source;
+
+ page_size = getpagesize();
+ if (chdir("/sys/slab"))
+ fatal("This kernel does not have SLUB support.\n");
+
+ while ((c = getopt_long(argc, argv, "afhil1npstvzTS", opts, NULL)) != -1)
+ switch(c) {
+ case '1':
+ show_single_ref = 1;
+ break;
+ case 'a':
+ show_alias = 1;
+ break;
+ case 'f':
+ show_first_alias = 1;
+ break;
+ case 'h':
+ usage();
+ return 0;
+ case 'i':
+ show_inverted = 1;
+ break;
+ case 'n':
+ show_numa = 1;
+ break;
+ case 's':
+ shrink = 1;
+ break;
+ case 'l':
+ show_slab = 1;
+ break;
+ case 't':
+ show_track = 1;
+ break;
+ case 'v':
+ validate = 1;
+ break;
+ case 'z':
+ skip_zero = 0;
+ break;
+ case 'T':
+ show_totals = 1;
+ break;
+ case 'S':
+ sort_size = 1;
+ break;
+
+ default:
+ fatal("%s: Invalid option '%c'\n", argv[0], optopt);
+
+ }
+
+ if (!show_slab && !show_alias && !show_track
+ && !validate && !shrink)
+ show_slab = 1;
+
+ if (argc > optind)
+ pattern_source = argv[optind];
+ else
+ pattern_source = ".*";
+
+ err = regcomp(&pattern, pattern_source, REG_ICASE|REG_NOSUB);
+ if (err)
+ fatal("%s: Invalid pattern '%s' code %d\n",
+ argv[0], pattern_source, err);
+ read_slab_dir();
+ if (show_alias)
+ alias();
+ else
+ if (show_totals)
+ totals();
+ else {
+ link_slabs();
+ rename_slabs();
+ sort_slabs();
+ output_slabs();
+ }
+ return 0;
+}
diff --git a/Documentation/vm/slub.txt b/Documentation/vm/slub.txt
new file mode 100644
index 0000000..727c8d8
--- /dev/null
+++ b/Documentation/vm/slub.txt
@@ -0,0 +1,113 @@
+Short users guide for SLUB
+--------------------------
+
+First of all slub should transparently replace SLAB. If you enable
+SLUB then everything should work the same (Note the word "should".
+There is likely not much value in that word at this point).
+
+The basic philosophy of SLUB is very different from SLAB. SLAB
+requires rebuilding the kernel to activate debug options for all
+SLABS. SLUB always includes full debugging but its off by default.
+SLUB can enable debugging only for selected slabs in order to avoid
+an impact on overall system performance which may make a bug more
+difficult to find.
+
+In order to switch debugging on one can add a option "slub_debug"
+to the kernel command line. That will enable full debugging for
+all slabs.
+
+Typically one would then use the "slabinfo" command to get statistical
+data and perform operation on the slabs. By default slabinfo only lists
+slabs that have data in them. See "slabinfo -h" for more options when
+running the command. slabinfo can be compiled with
+
+gcc -o slabinfo Documentation/vm/slabinfo.c
+
+Some of the modes of operation of slabinfo require that slub debugging
+be enabled on the command line. F.e. no tracking information will be
+available without debugging on and validation can only partially
+be performed if debugging was not switched on.
+
+Some more sophisticated uses of slub_debug:
+-------------------------------------------
+
+Parameters may be given to slub_debug. If none is specified then full
+debugging is enabled. Format:
+
+slub_debug=<Debug-Options> Enable options for all slabs
+slub_debug=<Debug-Options>,<slab name>
+ Enable options only for select slabs
+
+Possible debug options are
+ F Sanity checks on (enables SLAB_DEBUG_FREE. Sorry
+ SLAB legacy issues)
+ Z Red zoning
+ P Poisoning (object and padding)
+ U User tracking (free and alloc)
+ T Trace (please only use on single slabs)
+
+F.e. in order to boot just with sanity checks and red zoning one would specify:
+
+ slub_debug=FZ
+
+Trying to find an issue in the dentry cache? Try
+
+ slub_debug=,dentry_cache
+
+to only enable debugging on the dentry cache.
+
+Red zoning and tracking may realign the slab. We can just apply sanity checks
+to the dentry cache with
+
+ slub_debug=F,dentry_cache
+
+In case you forgot to enable debugging on the kernel command line: It is
+possible to enable debugging manually when the kernel is up. Look at the
+contents of:
+
+/sys/slab/<slab name>/
+
+Look at the writable files. Writing 1 to them will enable the
+corresponding debug option. All options can be set on a slab that does
+not contain objects. If the slab already contains objects then sanity checks
+and tracing may only be enabled. The other options may cause the realignment
+of objects.
+
+Careful with tracing: It may spew out lots of information and never stop if
+used on the wrong slab.
+
+SLAB Merging
+------------
+
+If no debugging is specified then SLUB may merge similar slabs together
+in order to reduce overhead and increase cache hotness of objects.
+slabinfo -a displays which slabs were merged together.
+
+Getting more performance
+------------------------
+
+To some degree SLUB's performance is limited by the need to take the
+list_lock once in a while to deal with partial slabs. That overhead is
+governed by the order of the allocation for each slab. The allocations
+can be influenced by kernel parameters:
+
+slub_min_objects=x (default 8)
+slub_min_order=x (default 0)
+slub_max_order=x (default 4)
+
+slub_min_objects allows to specify how many objects must at least fit
+into one slab in order for the allocation order to be acceptable.
+In general slub will be able to perform this number of allocations
+on a slab without consulting centralized resources (list_lock) where
+contention may occur.
+
+slub_min_order specifies a minim order of slabs. A similar effect like
+slub_min_objects.
+
+slub_max_order specified the order at which slub_min_objects should no
+longer be checked. This is useful to avoid SLUB trying to generate
+super large order pages to fit slub_min_objects of a slab cache with
+large object sizes into one high order page.
+
+
+Christoph Lameter, <clameter@sgi.com>, April 10, 2007
diff --git a/MAINTAINERS b/MAINTAINERS
index 0492dd8..6d665ac 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -700,6 +700,44 @@
M: rpurdie@rpsys.net
S: Maintained
+BLACKFIN ARCHITECTURE
+P: Aubrey Li
+M: aubrey.li@analog.com
+P: Bernd Schmidt
+M: bernd.schmidt@analog.com
+P: Bryan Wu
+M: bryan.wu@analog.com
+P: Grace Pan
+M: grace.pan@analog.com
+P: Michael Hennerich
+M: michael.hennerich@analog.com
+P: Mike Frysinger
+M: michael.frysinger@analog.com
+P: Jane Lv
+M: jane.lv@analog.com
+P: Jerry Zeng
+M: jerry.zeng@analog.com
+P: Jie Zhang
+M: jie.zhang@analog.com
+P: Robin Getz
+M: robin.getz@analog.com
+P: Roy Huang
+M: roy.huang@analog.com
+P: Sonic Zhang
+M: sonic.zhang@analog.com
+P: Yi Li
+M: yi.li@analog.com
+L: uclinux-dist-devel@blackfin.uclinux.org
+W: http://blackfin.uclinux.org
+S: Supported
+
+BLACKFIN SERIAL DRIVER
+P: Aubrey Li
+M: aubrey.li@analog.com
+L: uclinux-dist-devel@blackfin.uclinux.org
+W: http://blackfin.uclinux.org
+S: Supported
+
BAYCOM/HDLCDRV DRIVERS FOR AX.25
P: Thomas Sailer
M: t.sailer@alumni.ethz.ch
diff --git a/arch/alpha/boot/bootpz.c b/arch/alpha/boot/bootpz.c
index 4307bde..1036b51 100644
--- a/arch/alpha/boot/bootpz.c
+++ b/arch/alpha/boot/bootpz.c
@@ -467,3 +467,9 @@
#endif
runkernel();
}
+
+ /* dummy function, should never be called. */
+void *__kmalloc(size_t size, gfp_t flags)
+{
+ return (void *)NULL;
+}
diff --git a/arch/alpha/boot/tools/objstrip.c b/arch/alpha/boot/tools/objstrip.c
index 67beb1b..96154e7 100644
--- a/arch/alpha/boot/tools/objstrip.c
+++ b/arch/alpha/boot/tools/objstrip.c
@@ -25,7 +25,6 @@
#include <linux/a.out.h>
#include <linux/coff.h>
#include <linux/param.h>
-#include <linux/string.h>
#ifdef __ELF__
# include <linux/elf.h>
#endif
diff --git a/arch/alpha/kernel/osf_sys.c b/arch/alpha/kernel/osf_sys.c
index be133f1..ea405f5 100644
--- a/arch/alpha/kernel/osf_sys.c
+++ b/arch/alpha/kernel/osf_sys.c
@@ -93,7 +93,6 @@
* offset differences aren't the same as "d_reclen").
*/
#define NAME_OFFSET offsetof (struct osf_dirent, d_name)
-#define ROUND_UP(x) (((x)+3) & ~3)
struct osf_dirent {
unsigned int d_ino;
@@ -115,7 +114,7 @@
{
struct osf_dirent __user *dirent;
struct osf_dirent_callback *buf = (struct osf_dirent_callback *) __buf;
- unsigned int reclen = ROUND_UP(NAME_OFFSET + namlen + 1);
+ unsigned int reclen = ALIGN(NAME_OFFSET + namlen + 1, sizeof(u32));
unsigned int d_ino;
buf->error = -EINVAL; /* only used if we fail */
@@ -174,7 +173,6 @@
return error;
}
-#undef ROUND_UP
#undef NAME_OFFSET
asmlinkage unsigned long
@@ -1267,6 +1265,9 @@
if (len > limit)
return -ENOMEM;
+ if (flags & MAP_FIXED)
+ return addr;
+
/* First, see if the given suggestion fits.
The OSF/1 loader (/sbin/loader) relies on us returning an
diff --git a/arch/alpha/kernel/srmcons.c b/arch/alpha/kernel/srmcons.c
index 7569232..85a821a 100644
--- a/arch/alpha/kernel/srmcons.c
+++ b/arch/alpha/kernel/srmcons.c
@@ -164,9 +164,9 @@
int retval = 0;
if (srmconsp == NULL) {
+ srmconsp = kmalloc(sizeof(*srmconsp), GFP_KERNEL);
spin_lock_irqsave(&srmconsp_lock, flags);
- srmconsp = kmalloc(sizeof(*srmconsp), GFP_KERNEL);
if (srmconsp == NULL)
retval = -ENOMEM;
else {
diff --git a/arch/arm/mm/mmap.c b/arch/arm/mm/mmap.c
index b0b5f46..2c4c242 100644
--- a/arch/arm/mm/mmap.c
+++ b/arch/arm/mm/mmap.c
@@ -49,8 +49,7 @@
#endif
/*
- * We should enforce the MAP_FIXED case. However, currently
- * the generic kernel code doesn't allow us to handle this.
+ * We enforce the MAP_FIXED case.
*/
if (flags & MAP_FIXED) {
if (aliasing && flags & MAP_SHARED && addr & (SHMLBA - 1))
diff --git a/arch/arm26/Kconfig b/arch/arm26/Kconfig
index 989113d..20688bc 100644
--- a/arch/arm26/Kconfig
+++ b/arch/arm26/Kconfig
@@ -57,9 +57,6 @@
bool
default y
-config GENERIC_BUST_SPINLOCK
- bool
-
config ZONE_DMA
bool
default y
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
new file mode 100644
index 0000000..1a49305
--- /dev/null
+++ b/arch/blackfin/Kconfig
@@ -0,0 +1,989 @@
+#
+# For a description of the syntax of this configuration file,
+# see Documentation/kbuild/kconfig-language.txt.
+#
+
+mainmenu "uClinux/Blackfin (w/o MMU) Kernel Configuration"
+
+config MMU
+ bool
+ default n
+
+config FPU
+ bool
+ default n
+
+config RWSEM_GENERIC_SPINLOCK
+ bool
+ default y
+
+config RWSEM_XCHGADD_ALGORITHM
+ bool
+ default n
+
+config BLACKFIN
+ bool
+ default y
+
+config BFIN
+ bool
+ default y
+
+config SEMAPHORE_SLEEPERS
+ bool
+ default y
+
+config GENERIC_FIND_NEXT_BIT
+ bool
+ default y
+
+config GENERIC_HWEIGHT
+ bool
+ default y
+
+config GENERIC_HARDIRQS
+ bool
+ default y
+
+config GENERIC_IRQ_PROBE
+ bool
+ default y
+
+config GENERIC_TIME
+ bool
+ default n
+
+config GENERIC_CALIBRATE_DELAY
+ bool
+ default y
+
+config FORCE_MAX_ZONEORDER
+ int
+ default "14"
+
+config GENERIC_CALIBRATE_DELAY
+ bool
+ default y
+
+config IRQCHIP_DEMUX_GPIO
+ bool
+ default y
+
+source "init/Kconfig"
+source "kernel/Kconfig.preempt"
+
+menu "Blackfin Processor Options"
+
+comment "Processor and Board Settings"
+
+choice
+ prompt "CPU"
+ default BF533
+
+config BF531
+ bool "BF531"
+ help
+ BF531 Processor Support.
+
+config BF532
+ bool "BF532"
+ help
+ BF532 Processor Support.
+
+config BF533
+ bool "BF533"
+ help
+ BF533 Processor Support.
+
+config BF534
+ bool "BF534"
+ help
+ BF534 Processor Support.
+
+config BF536
+ bool "BF536"
+ help
+ BF536 Processor Support.
+
+config BF537
+ bool "BF537"
+ help
+ BF537 Processor Support.
+
+config BF561
+ bool "BF561"
+ help
+ Not Supported Yet - Work in progress - BF561 Processor Support.
+
+endchoice
+
+choice
+ prompt "Silicon Rev"
+ default BF_REV_0_2 if BF537
+ default BF_REV_0_3 if BF533
+
+config BF_REV_0_2
+ bool "0.2"
+ depends on (BF537 || BF536 || BF534)
+
+config BF_REV_0_3
+ bool "0.3"
+ depends on (BF561 || BF537 || BF536 || BF534 || BF533 || BF532 || BF531)
+
+config BF_REV_0_4
+ bool "0.4"
+ depends on (BF561 || BF533 || BF532 || BF531)
+
+config BF_REV_0_5
+ bool "0.5"
+ depends on (BF561 || BF533 || BF532 || BF531)
+
+endchoice
+
+config BFIN_DUAL_CORE
+ bool
+ depends on (BF561)
+ default y
+
+config BFIN_SINGLE_CORE
+ bool
+ depends on !BFIN_DUAL_CORE
+ default y
+
+choice
+ prompt "System type"
+ default BFIN533_STAMP
+ help
+ Do NOT change the board here. Please use the top level
+ configuration to ensure that all the other settings are
+ correct.
+
+config BFIN533_EZKIT
+ bool "BF533-EZKIT"
+ depends on (BF533 || BF532 || BF531)
+ help
+ BF533-EZKIT-LITE board Support.
+
+config BFIN533_STAMP
+ bool "BF533-STAMP"
+ depends on (BF533 || BF532 || BF531)
+ help
+ BF533-STAMP board Support.
+
+config BFIN537_STAMP
+ bool "BF537-STAMP"
+ depends on (BF537 || BF536 || BF534)
+ help
+ BF537-STAMP board Support.
+
+config BFIN533_BLUETECHNIX_CM
+ bool "Bluetechnix CM-BF533"
+ depends on (BF533)
+ help
+ CM-BF533 support for EVAL- and DEV-Board.
+
+config BFIN537_BLUETECHNIX_CM
+ bool "Bluetechnix CM-BF537"
+ depends on (BF537)
+ help
+ CM-BF537 support for EVAL- and DEV-Board.
+
+config BFIN561_BLUETECHNIX_CM
+ bool "BF561-CM"
+ depends on (BF561)
+ help
+ CM-BF561 support for EVAL- and DEV-Board.
+
+config BFIN561_EZKIT
+ bool "BF561-EZKIT"
+ depends on (BF561)
+ help
+ BF561-EZKIT-LITE board Support.
+
+config PNAV10
+ bool "PNAV 1.0 board"
+ depends on (BF537)
+ help
+ PNAV 1.0 board Support.
+
+config GENERIC_BOARD
+ bool "Custom"
+ depends on (BF537 || BF536 \
+ || BF534 || BF561 || BF535 || BF533 || BF532 || BF531)
+ help
+ GENERIC or Custom board Support.
+
+endchoice
+
+config MEM_GENERIC_BOARD
+ bool
+ depends on GENERIC_BOARD
+ default y
+
+config MEM_MT48LC64M4A2FB_7E
+ bool
+ depends on (BFIN533_STAMP)
+ default y
+
+config MEM_MT48LC16M16A2TG_75
+ bool
+ depends on (BFIN533_EZKIT || BFIN561_EZKIT \
+ || BFIN533_BLUETECHNIX_CM || BFIN537_BLUETECHNIX_CM)
+ default y
+
+config MEM_MT48LC32M8A2_75
+ bool
+ depends on (BFIN537_STAMP || PNAV10)
+ default y
+
+config MEM_MT48LC8M32B2B5_7
+ bool
+ depends on (BFIN561_BLUETECHNIX_CM)
+ default y
+
+config BFIN_SHARED_FLASH_ENET
+ bool
+ depends on (BFIN533_STAMP)
+ default y
+
+source "arch/blackfin/mach-bf533/Kconfig"
+source "arch/blackfin/mach-bf561/Kconfig"
+source "arch/blackfin/mach-bf537/Kconfig"
+
+menu "Board customizations"
+
+config CMDLINE_BOOL
+ bool "Default bootloader kernel arguments"
+
+config CMDLINE
+ string "Initial kernel command string"
+ depends on CMDLINE_BOOL
+ default "console=ttyBF0,57600"
+ help
+ If you don't have a boot loader capable of passing a command line string
+ to the kernel, you may specify one here. As a minimum, you should specify
+ the memory size and the root device (e.g., mem=8M, root=/dev/nfs).
+
+comment "Board Setup"
+
+config CLKIN_HZ
+ int "Crystal Frequency in Hz"
+ default "11059200" if BFIN533_STAMP
+ default "27000000" if BFIN533_EZKIT
+ default "25000000" if BFIN537_STAMP
+ default "30000000" if BFIN561_EZKIT
+ default "24576000" if PNAV10
+ help
+ The frequency of CLKIN crystal oscillator on the board in Hz.
+
+config MEM_SIZE
+ int "SDRAM Memory Size in MBytes"
+ default 32 if BFIN533_EZKIT
+ default 64 if BFIN537_STAMP
+ default 64 if BFIN561_EZKIT
+ default 128 if BFIN533_STAMP
+ default 64 if PNAV10
+
+config MEM_ADD_WIDTH
+ int "SDRAM Memory Address Width"
+ default 9 if BFIN533_EZKIT
+ default 9 if BFIN561_EZKIT
+ default 10 if BFIN537_STAMP
+ default 11 if BFIN533_STAMP
+ default 10 if PNAV10
+
+config ENET_FLASH_PIN
+ int "PF port/pin used for flash and ethernet sharing"
+ depends on (BFIN533_STAMP)
+ default 0
+ help
+ PF port/pin used for flash and ethernet sharing to allow other PF
+ pins to be used on other platforms without having to touch common
+ code.
+ For example: PF0 --> 0,PF1 --> 1,PF2 --> 2, etc.
+
+config BOOT_LOAD
+ hex "Kernel load address for booting"
+ default "0x1000"
+ help
+ This option allows you to set the load address of the kernel.
+ This can be useful if you are on a board which has a small amount
+ of memory or you wish to reserve some memory at the beginning of
+ the address space.
+
+ Note that you generally want to keep this value at or above 4k
+ (0x1000) as this will allow the kernel to capture NULL pointer
+ references.
+
+comment "LED Status Indicators"
+ depends on (BFIN533_STAMP || BFIN533_BLUETECHNIX_CM)
+
+config BFIN_ALIVE_LED
+ bool "Enable Board Alive"
+ depends on (BFIN533_STAMP || BFIN533_BLUETECHNIX_CM)
+ default n
+ help
+ Blink the LEDs you select when the kernel is running. Helps detect
+ a hung kernel.
+
+config BFIN_ALIVE_LED_NUM
+ int "LED"
+ depends on BFIN_ALIVE_LED
+ range 1 3 if BFIN533_STAMP
+ default "3" if BFIN533_STAMP
+ help
+ Select the LED (marked on the board) for you to blink.
+
+config BFIN_IDLE_LED
+ bool "Enable System Load/Idle LED"
+ depends on (BFIN533_STAMP || BFIN533_BLUETECHNIX_CM)
+ default n
+ help
+ Blinks the LED you select when to determine kernel load.
+
+config BFIN_IDLE_LED_NUM
+ int "LED"
+ depends on BFIN_IDLE_LED
+ range 1 3 if BFIN533_STAMP
+ default "2" if BFIN533_STAMP
+ help
+ Select the LED (marked on the board) for you to blink.
+
+#
+# Sorry - but you need to put the hex address here -
+#
+
+# Flag Data register
+config BFIN_ALIVE_LED_PORT
+ hex
+ default 0xFFC00700 if (BFIN533_STAMP)
+
+# Peripheral Flag Direction Register
+config BFIN_ALIVE_LED_DPORT
+ hex
+ default 0xFFC00730 if (BFIN533_STAMP)
+
+config BFIN_ALIVE_LED_PIN
+ hex
+ default 0x04 if (BFIN533_STAMP && BFIN_ALIVE_LED_NUM = 1)
+ default 0x08 if (BFIN533_STAMP && BFIN_ALIVE_LED_NUM = 2)
+ default 0x10 if (BFIN533_STAMP && BFIN_ALIVE_LED_NUM = 3)
+
+config BFIN_IDLE_LED_PORT
+ hex
+ default 0xFFC00700 if (BFIN533_STAMP)
+
+# Peripheral Flag Direction Register
+config BFIN_IDLE_LED_DPORT
+ hex
+ default 0xFFC00730 if (BFIN533_STAMP)
+
+config BFIN_IDLE_LED_PIN
+ hex
+ default 0x04 if (BFIN533_STAMP && BFIN_IDLE_LED_NUM = 1)
+ default 0x08 if (BFIN533_STAMP && BFIN_IDLE_LED_NUM = 2)
+ default 0x10 if (BFIN533_STAMP && BFIN_IDLE_LED_NUM = 3)
+
+comment "Console UART Setup"
+
+choice
+ prompt "Baud Rate"
+ default BAUD_57600
+config BAUD_9600
+ bool "9600"
+config BAUD_19200
+ bool "19200"
+config BAUD_38400
+ bool "38400"
+config BAUD_57600
+ bool "57600"
+config BAUD_115200
+ bool "115200"
+endchoice
+
+choice
+ prompt "Parity"
+ default BAUD_NO_PARITY
+config BAUD_NO_PARITY
+ bool "No Parity"
+config BAUD_PARITY
+ bool "Parity"
+endchoice
+
+choice
+ prompt "Stop Bits"
+ default BAUD_1_STOPBIT
+config BAUD_1_STOPBIT
+ bool "1"
+config BAUD_2_STOPBIT
+ bool "2"
+endchoice
+
+endmenu
+
+
+menu "Blackfin Kernel Optimizations"
+
+comment "Timer Tick"
+
+source kernel/Kconfig.hz
+
+comment "Memory Optimizations"
+
+config I_ENTRY_L1
+ bool "Locate interrupt entry code in L1 Memory"
+ default y
+ help
+ If enabled interrupt entry code (STORE/RESTORE CONTEXT) is linked
+ into L1 instruction memory.(less latency)
+
+config EXCPT_IRQ_SYSC_L1
+ bool "Locate entire ASM lowlevel excepetion / interrupt - Syscall and CPLB handler code in L1 Memory"
+ default y
+ help
+ If enabled entire ASM lowlevel exception and interrupt entry code (STORE/RESTORE CONTEXT) is linked
+ into L1 instruction memory.(less latency)
+
+config DO_IRQ_L1
+ bool "Locate frequently called do_irq dispatcher function in L1 Memory"
+ default y
+ help
+ If enabled frequently called do_irq dispatcher function is linked
+ into L1 instruction memory.(less latency)
+
+config CORE_TIMER_IRQ_L1
+ bool "Locate frequently called timer_interrupt() function in L1 Memory"
+ default y
+ help
+ If enabled frequently called timer_interrupt() function is linked
+ into L1 instruction memory.(less latency)
+
+config IDLE_L1
+ bool "Locate frequently idle function in L1 Memory"
+ default y
+ help
+ If enabled frequently called idle function is linked
+ into L1 instruction memory.(less latency)
+
+config SCHEDULE_L1
+ bool "Locate kernel schedule function in L1 Memory"
+ default y
+ help
+ If enabled frequently called kernel schedule is linked
+ into L1 instruction memory.(less latency)
+
+config ARITHMETIC_OPS_L1
+ bool "Locate kernel owned arithmetic functions in L1 Memory"
+ default y
+ help
+ If enabled arithmetic functions are linked
+ into L1 instruction memory.(less latency)
+
+config ACCESS_OK_L1
+ bool "Locate access_ok function in L1 Memory"
+ default y
+ help
+ If enabled access_ok function is linked
+ into L1 instruction memory.(less latency)
+
+config MEMSET_L1
+ bool "Locate memset function in L1 Memory"
+ default y
+ help
+ If enabled memset function is linked
+ into L1 instruction memory.(less latency)
+
+config MEMCPY_L1
+ bool "Locate memcpy function in L1 Memory"
+ default y
+ help
+ If enabled memcpy function is linked
+ into L1 instruction memory.(less latency)
+
+config SYS_BFIN_SPINLOCK_L1
+ bool "Locate sys_bfin_spinlock function in L1 Memory"
+ default y
+ help
+ If enabled sys_bfin_spinlock function is linked
+ into L1 instruction memory.(less latency)
+
+config IP_CHECKSUM_L1
+ bool "Locate IP Checksum function in L1 Memory"
+ default n
+ help
+ If enabled IP Checksum function is linked
+ into L1 instruction memory.(less latency)
+
+config CACHELINE_ALIGNED_L1
+ bool "Locate cacheline_aligned data to L1 Data Memory"
+ default y
+ depends on !BF531
+ help
+ If enabled cacheline_anligned data is linked
+ into L1 data memory.(less latency)
+
+config SYSCALL_TAB_L1
+ bool "Locate Syscall Table L1 Data Memory"
+ default n
+ depends on !BF531
+ help
+ If enabled the Syscall LUT is linked
+ into L1 data memory.(less latency)
+
+config CPLB_SWITCH_TAB_L1
+ bool "Locate CPLB Switch Tables L1 Data Memory"
+ default n
+ depends on !BF531
+ help
+ If enabled the CPLB Switch Tables are linked
+ into L1 data memory.(less latency)
+
+endmenu
+
+
+choice
+ prompt "Kernel executes from"
+ help
+ Choose the memory type that the kernel will be running in.
+
+config RAMKERNEL
+ bool "RAM"
+ help
+ The kernel will be resident in RAM when running.
+
+config ROMKERNEL
+ bool "ROM"
+ help
+ The kernel will be resident in FLASH/ROM when running.
+
+endchoice
+
+source "mm/Kconfig"
+
+config LARGE_ALLOCS
+ bool "Allow allocating large blocks (> 1MB) of memory"
+ help
+ Allow the slab memory allocator to keep chains for very large
+ memory sizes - upto 32MB. You may need this if your system has
+ a lot of RAM, and you need to able to allocate very large
+ contiguous chunks. If unsure, say N.
+
+config BFIN_DMA_5XX
+ bool "Enable DMA Support"
+ depends on (BF533 || BF532 || BF531 || BF537 || BF536 || BF534 || BF561)
+ default y
+ help
+ DMA driver for BF5xx.
+
+choice
+ prompt "Uncached SDRAM region"
+ default DMA_UNCACHED_1M
+ depends BFIN_DMA_5XX
+config DMA_UNCACHED_2M
+ bool "Enable 2M DMA region"
+config DMA_UNCACHED_1M
+ bool "Enable 1M DMA region"
+config DMA_UNCACHED_NONE
+ bool "Disable DMA region"
+endchoice
+
+
+comment "Cache Support"
+config BLKFIN_CACHE
+ bool "Enable ICACHE"
+config BLKFIN_DCACHE
+ bool "Enable DCACHE"
+config BLKFIN_DCACHE_BANKA
+ bool "Enable only 16k BankA DCACHE - BankB is SRAM"
+ depends on BLKFIN_DCACHE && !BF531
+ default n
+config BLKFIN_CACHE_LOCK
+ bool "Enable Cache Locking"
+
+choice
+ prompt "Policy"
+ depends on BLKFIN_DCACHE
+ default BLKFIN_WB
+config BLKFIN_WB
+ bool "Write back"
+ help
+ Write Back Policy:
+ Cached data will be written back to SDRAM only when needed.
+ This can give a nice increase in performance, but beware of
+ broken drivers that do not properly invalidate/flush their
+ cache.
+
+ Write Through Policy:
+ Cached data will always be written back to SDRAM when the
+ cache is updated. This is a completely safe setting, but
+ performance is worse than Write Back.
+
+ If you are unsure of the options and you want to be safe,
+ then go with Write Through.
+
+config BLKFIN_WT
+ bool "Write through"
+ help
+ Write Back Policy:
+ Cached data will be written back to SDRAM only when needed.
+ This can give a nice increase in performance, but beware of
+ broken drivers that do not properly invalidate/flush their
+ cache.
+
+ Write Through Policy:
+ Cached data will always be written back to SDRAM when the
+ cache is updated. This is a completely safe setting, but
+ performance is worse than Write Back.
+
+ If you are unsure of the options and you want to be safe,
+ then go with Write Through.
+
+endchoice
+
+config L1_MAX_PIECE
+ int "Set the max L1 SRAM pieces"
+ default 16
+ help
+ Set the max memory pieces for the L1 SRAM allocation algorithm.
+ Min value is 16. Max value is 1024.
+
+menu "Clock Settings"
+
+
+config BFIN_KERNEL_CLOCK
+ bool "Re-program Clocks while Kernel boots?"
+ default n
+ help
+ This option decides if kernel clocks are re-programed from the
+ bootloader settings. If the clocks are not set, the SDRAM settings
+ are also not changed, and the Bootloader does 100% of the hardware
+ configuration.
+
+config VCO_MULT
+ int "VCO Multiplier"
+ depends on BFIN_KERNEL_CLOCK
+ default "22" if BFIN533_EZKIT
+ default "45" if BFIN533_STAMP
+ default "20" if BFIN537_STAMP
+ default "22" if BFIN533_BLUETECHNIX_CM
+ default "20" if BFIN537_BLUETECHNIX_CM
+ default "20" if BFIN561_BLUETECHNIX_CM
+ default "20" if BFIN561_EZKIT
+
+config CCLK_DIV
+ int "Core Clock Divider"
+ depends on BFIN_KERNEL_CLOCK
+ default 1 if BFIN533_EZKIT
+ default 1 if BFIN533_STAMP
+ default 1 if BFIN537_STAMP
+ default 1 if BFIN533_BLUETECHNIX_CM
+ default 1 if BFIN537_BLUETECHNIX_CM
+ default 1 if BFIN561_BLUETECHNIX_CM
+ default 1 if BFIN561_EZKIT
+
+config SCLK_DIV
+ int "System Clock Divider"
+ depends on BFIN_KERNEL_CLOCK
+ default 5 if BFIN533_EZKIT
+ default 5 if BFIN533_STAMP
+ default 4 if BFIN537_STAMP
+ default 5 if BFIN533_BLUETECHNIX_CM
+ default 4 if BFIN537_BLUETECHNIX_CM
+ default 4 if BFIN561_BLUETECHNIX_CM
+ default 5 if BFIN561_EZKIT
+
+config CLKIN_HALF
+ bool "Half ClockIn"
+ depends on BFIN_KERNEL_CLOCK
+ default n
+
+config PLL_BYPASS
+ bool "Bypass PLL"
+ depends on BFIN_KERNEL_CLOCK
+ default n
+
+endmenu
+
+comment "Asynchonous Memory Configuration"
+
+menu "EBIU_AMBCTL Global Control"
+config C_AMCKEN
+ bool "Enable CLKOUT"
+ default y
+
+config C_CDPRIO
+ bool "DMA has priority over core for ext. accesses"
+ default n
+
+config C_B0PEN
+ depends on BF561
+ bool "Bank 0 16 bit packing enable"
+ default y
+
+config C_B1PEN
+ depends on BF561
+ bool "Bank 1 16 bit packing enable"
+ default y
+
+config C_B2PEN
+ depends on BF561
+ bool "Bank 2 16 bit packing enable"
+ default y
+
+config C_B3PEN
+ depends on BF561
+ bool "Bank 3 16 bit packing enable"
+ default n
+
+choice
+ prompt"Enable Asynchonous Memory Banks"
+ default C_AMBEN_ALL
+
+config C_AMBEN
+ bool "Disable All Banks"
+
+config C_AMBEN_B0
+ bool "Enable Bank 0"
+
+config C_AMBEN_B0_B1
+ bool "Enable Bank 0 & 1"
+
+config C_AMBEN_B0_B1_B2
+ bool "Enable Bank 0 & 1 & 2"
+
+config C_AMBEN_ALL
+ bool "Enable All Banks"
+endchoice
+endmenu
+
+menu "EBIU_AMBCTL Control"
+config BANK_0
+ hex "Bank 0"
+ default 0x7BB0
+
+config BANK_1
+ hex "Bank 1"
+ default 0x7BB0
+
+config BANK_2
+ hex "Bank 2"
+ default 0x7BB0
+
+config BANK_3
+ hex "Bank 3"
+ default 0x99B3
+endmenu
+
+endmenu
+
+#############################################################################
+menu "Bus options (PCI, PCMCIA, EISA, MCA, ISA)"
+
+config PCI
+ bool "PCI support"
+ help
+ Support for PCI bus.
+
+source "drivers/pci/Kconfig"
+
+config HOTPLUG
+ bool "Support for hot-pluggable device"
+ help
+ Say Y here if you want to plug devices into your computer while
+ the system is running, and be able to use them quickly. In many
+ cases, the devices can likewise be unplugged at any time too.
+
+ One well known example of this is PCMCIA- or PC-cards, credit-card
+ size devices such as network cards, modems or hard drives which are
+ plugged into slots found on all modern laptop computers. Another
+ example, used on modern desktops as well as laptops, is USB.
+
+ Enable HOTPLUG and KMOD, and build a modular kernel. Get agent
+ software (at <http://linux-hotplug.sourceforge.net/>) and install it.
+ Then your kernel will automatically call out to a user mode "policy
+ agent" (/sbin/hotplug) to load modules and set up software needed
+ to use devices as you hotplug them.
+
+source "drivers/pcmcia/Kconfig"
+
+source "drivers/pci/hotplug/Kconfig"
+
+endmenu
+
+menu "Executable file formats"
+
+source "fs/Kconfig.binfmt"
+
+endmenu
+
+menu "Power management options"
+source "kernel/power/Kconfig"
+
+choice
+ prompt "Select PM Wakeup Event Source"
+ default PM_WAKEUP_GPIO_BY_SIC_IWR
+ depends on PM
+ help
+ If you have a GPIO already configured as input with the corresponding PORTx_MASK
+ bit set - "Specify Wakeup Event by SIC_IWR value"
+
+config PM_WAKEUP_GPIO_BY_SIC_IWR
+ bool "Specify Wakeup Event by SIC_IWR value"
+config PM_WAKEUP_BY_GPIO
+ bool "Cause Wakeup Event by GPIO"
+config PM_WAKEUP_GPIO_API
+ bool "Configure Wakeup Event by PM GPIO API"
+
+endchoice
+
+config PM_WAKEUP_SIC_IWR
+ hex "Wakeup Events (SIC_IWR)"
+ depends on PM_WAKEUP_GPIO_BY_SIC_IWR
+ default 0x80000000 if (BF537 || BF536 || BF534)
+ default 0x100000 if (BF533 || BF532 || BF531)
+
+config PM_WAKEUP_GPIO_NUMBER
+ int "Wakeup GPIO number"
+ range 0 47
+ depends on PM_WAKEUP_BY_GPIO
+ default 2 if BFIN537_STAMP
+
+choice
+ prompt "GPIO Polarity"
+ depends on PM_WAKEUP_BY_GPIO
+ default PM_WAKEUP_GPIO_POLAR_H
+config PM_WAKEUP_GPIO_POLAR_H
+ bool "Active High"
+config PM_WAKEUP_GPIO_POLAR_L
+ bool "Active Low"
+config PM_WAKEUP_GPIO_POLAR_EDGE_F
+ bool "Falling EDGE"
+config PM_WAKEUP_GPIO_POLAR_EDGE_R
+ bool "Rising EDGE"
+config PM_WAKEUP_GPIO_POLAR_EDGE_B
+ bool "Both EDGE"
+endchoice
+
+endmenu
+
+if (BF537 || BF533)
+
+menu "CPU Frequency scaling"
+
+source "drivers/cpufreq/Kconfig"
+
+config CPU_FREQ
+ bool
+ default n
+ help
+ If you want to enable this option, you should select the
+ DPMC driver from Character Devices.
+endmenu
+
+endif
+
+source "net/Kconfig"
+
+source "drivers/Kconfig"
+
+source "fs/Kconfig"
+
+source "arch/blackfin/oprofile/Kconfig"
+
+menu "Kernel hacking"
+
+source "lib/Kconfig.debug"
+
+config DEBUG_HWERR
+ bool "Hardware error interrupt debugging"
+ depends on DEBUG_KERNEL
+ help
+ When enabled, the hardware error interrupt is never disabled, and
+ will happen immediately when an error condition occurs. This comes
+ at a slight cost in code size, but is necessary if you are getting
+ hardware error interrupts and need to know where they are coming
+ from.
+
+config DEBUG_ICACHE_CHECK
+ bool "Check Instruction cache coherancy"
+ depends on DEBUG_KERNEL
+ depends on DEBUG_HWERR
+ help
+ Say Y here if you are getting wierd unexplained errors. This will
+ ensure that icache is what SDRAM says it should be, by doing a
+ byte wise comparision between SDRAM and instruction cache. This
+ also relocates the irq_panic() function to L1 memory, (which is
+ un-cached).
+
+config DEBUG_KERNEL_START
+ bool "Debug Kernel Startup"
+ depends on DEBUG_KERNEL
+ help
+ Say Y here to put in an mini-execption handler before the kernel
+ replaces the bootloader exception handler. This will stop kernels
+ from dieing at startup with no visible error messages.
+
+config DEBUG_SERIAL_EARLY_INIT
+ bool "Initialize serial driver early"
+ default n
+ depends on SERIAL_BFIN
+ help
+ Say Y here if you want to get kernel output early when kernel
+ crashes before the normal console initialization. If this option
+ is enable, console output will always go to the ttyBF0, no matter
+ what kernel boot paramters you set.
+
+config DEBUG_HUNT_FOR_ZERO
+ bool "Catch NULL pointer reads/writes"
+ default y
+ help
+ Say Y here to catch reads/writes to anywhere in the memory range
+ from 0x0000 - 0x0FFF (the first 4k) of memory. This is useful in
+ catching common programming errors such as NULL pointer dereferences.
+
+ Misbehaving applications will be killed (generate a SEGV) while the
+ kernel will trigger a panic.
+
+ Enabling this option will take up an extra entry in CPLB table.
+ Otherwise, there is no extra overhead.
+
+config DEBUG_BFIN_NO_KERN_HWTRACE
+ bool "Trace user apps (turn off hwtrace in kernel)"
+ default n
+ help
+ Some pieces of the kernel contain a lot of flow changes which can
+ quickly fill up the hardware trace buffer. When debugging crashes,
+ the hardware trace may indicate that the problem lies in kernel
+ space when in reality an application is buggy.
+
+ Say Y here to disable hardware tracing in some known "jumpy" pieces
+ of code so that the trace buffer will extend further back.
+
+config DUAL_CORE_TEST_MODULE
+ tristate "Dual Core Test Module"
+ depends on (BF561)
+ default n
+ help
+ Say Y here to build-in dual core test module for dual core test.
+
+config CPLB_INFO
+ bool "Display the CPLB information"
+ help
+ Display the CPLB information.
+
+config ACCESS_CHECK
+ bool "Check the user pointer address"
+ default y
+ help
+ Usually the pointer transfer from user space is checked to see if its
+ address is in the kernel space.
+
+ Say N here to disable that check to improve the performance.
+
+endmenu
+
+source "security/Kconfig"
+
+source "crypto/Kconfig"
+
+source "lib/Kconfig"
diff --git a/arch/blackfin/Makefile b/arch/blackfin/Makefile
new file mode 100644
index 0000000..52d4dbd
--- /dev/null
+++ b/arch/blackfin/Makefile
@@ -0,0 +1,80 @@
+#
+# arch/blackfin/Makefile
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License. See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+
+
+CROSS_COMPILE ?= bfin-uclinux-
+LDFLAGS_vmlinux := -X
+OBJCOPYFLAGS := -O binary -R .note -R .comment -S
+GZFLAGS := -9
+
+CFLAGS_MODULE += -mlong-calls
+KALLSYMS += --symbol-prefix=_
+
+
+# setup the machine name and the machine dependent settings
+machine-$(CONFIG_BF531) := bf533
+machine-$(CONFIG_BF532) := bf533
+machine-$(CONFIG_BF533) := bf533
+machine-$(CONFIG_BF534) := bf537
+machine-$(CONFIG_BF536) := bf537
+machine-$(CONFIG_BF537) := bf537
+machine-$(CONFIG_BF561) := bf561
+MACHINE := $(machine-y)
+export MACHINE
+
+
+head-y := arch/$(ARCH)/mach-$(MACHINE)/head.o arch/$(ARCH)/kernel/init_task.o
+
+core-y += arch/$(ARCH)/kernel/ arch/$(ARCH)/mm/ arch/$(ARCH)/mach-common/
+
+# If we have a machine-specific directory, then include it in the build.
+ifneq ($(machine-y),)
+core-y += arch/$(ARCH)/mach-$(MACHINE)/
+core-y += arch/$(ARCH)/mach-$(MACHINE)/boards/
+endif
+
+libs-y += arch/$(ARCH)/lib/
+
+drivers-$(CONFIG_OPROFILE) += arch/$(ARCH)/oprofile/
+
+
+
+# Update machine arch symlinks if something which affects
+# them changed. We use .mach to indicate when they were updated
+# last, otherwise make uses the target directory mtime.
+
+include/asm-blackfin/.mach: $(wildcard include/config/arch/*.h) include/config/auto.conf
+ @echo ' SYMLINK include/asm-$(ARCH)/mach-$(MACHINE) -> include/asm-$(ARCH)/mach'
+ifneq ($(KBUILD_SRC),)
+ $(Q)mkdir -p include/asm-$(ARCH)
+ $(Q)ln -fsn $(srctree)/include/asm-$(ARCH)/mach-$(MACHINE) include/asm-$(ARCH)/mach
+else
+ $(Q)ln -fsn mach-$(MACHINE) include/asm-$(ARCH)/mach
+endif
+ @touch $@
+
+CLEAN_FILES += \
+ include/asm-$(ARCH)/asm-offsets.h \
+ arch/$(ARCH)/kernel/asm-offsets.s \
+ include/asm-$(ARCH)/mach \
+ include/asm-$(ARCH)/.mach
+
+archprepare: include/asm-blackfin/.mach
+archclean:
+ $(Q)$(MAKE) $(clean)=$(boot)
+
+
+all: vmImage
+boot := arch/$(ARCH)/boot
+BOOT_TARGETS = vmImage
+.PHONY: $(BOOT_TARGETS)
+$(BOOT_TARGETS): vmlinux
+ $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
+define archhelp
+ echo '* vmImage - Kernel-only image for U-Boot (arch/$(ARCH)/boot/vmImage)'
+endef
diff --git a/arch/blackfin/boot/Makefile b/arch/blackfin/boot/Makefile
new file mode 100644
index 0000000..49e8098
--- /dev/null
+++ b/arch/blackfin/boot/Makefile
@@ -0,0 +1,27 @@
+#
+# arch/blackfin/boot/Makefile
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License. See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+
+MKIMAGE := $(srctree)/scripts/mkuboot.sh
+
+targets := vmImage
+extra-y += vmlinux.bin vmlinux.gz
+
+quiet_cmd_uimage = UIMAGE $@
+ cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A $(ARCH) -O linux -T kernel \
+ -C gzip -a $(CONFIG_BOOT_LOAD) -e $(CONFIG_BOOT_LOAD) -n 'Linux-$(KERNELRELEASE)' \
+ -d $< $@
+
+$(obj)/vmlinux.bin: vmlinux FORCE
+ $(call if_changed,objcopy)
+
+$(obj)/vmlinux.gz: $(obj)/vmlinux.bin FORCE
+ $(call if_changed,gzip)
+
+$(obj)/vmImage: $(obj)/vmlinux.gz
+ $(call if_changed,uimage)
+ @echo 'Kernel: $@ is ready'
diff --git a/arch/blackfin/defconfig b/arch/blackfin/defconfig
new file mode 100644
index 0000000..d5904ca
--- /dev/null
+++ b/arch/blackfin/defconfig
@@ -0,0 +1,1314 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.20
+#
+# CONFIG_MMU is not set
+# CONFIG_FPU is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+CONFIG_BFIN=y
+CONFIG_SEMAPHORE_SLEEPERS=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_UCLINUX=y
+CONFIG_FORCE_MAX_ZONEORDER=14
+CONFIG_IRQCHIP_DEMUX_GPIO=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_LIMIT_PAGECACHE is not set
+CONFIG_BUDDY=y
+# CONFIG_NP2 is not set
+CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
+CONFIG_TINY_SHMEM=y
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# Blackfin Processor Options
+#
+
+#
+# Processor and Board Settings
+#
+# CONFIG_BF531 is not set
+# CONFIG_BF532 is not set
+# CONFIG_BF533 is not set
+# CONFIG_BF534 is not set
+# CONFIG_BF535 is not set
+# CONFIG_BF536 is not set
+CONFIG_BF537=y
+# CONFIG_BF561 is not set
+CONFIG_BF_REV_0_2=y
+# CONFIG_BF_REV_0_3 is not set
+# CONFIG_BF_REV_0_4 is not set
+# CONFIG_BF_REV_0_5 is not set
+CONFIG_BLACKFIN=y
+CONFIG_BFIN_SINGLE_CORE=y
+# CONFIG_BFIN533_EZKIT is not set
+# CONFIG_BFIN533_STAMP is not set
+CONFIG_BFIN537_STAMP=y
+# CONFIG_BFIN533_BLUETECHNIX_CM is not set
+# CONFIG_BFIN537_BLUETECHNIX_CM is not set
+# CONFIG_BFIN561_BLUETECHNIX_CM is not set
+# CONFIG_BFIN561_EZKIT is not set
+# CONFIG_PNAV10 is not set
+# CONFIG_GENERIC_BOARD is not set
+CONFIG_MEM_MT48LC32M8A2_75=y
+CONFIG_IRQ_PLL_WAKEUP=7
+
+#
+# BF537 Specific Configuration
+#
+
+#
+# PORT F/G Selection
+#
+CONFIG_BF537_PORT_F=y
+# CONFIG_BF537_PORT_G is not set
+# CONFIG_BF537_PORT_H is not set
+
+#
+# Interrupt Priority Assignment
+#
+
+#
+# Priority
+#
+CONFIG_IRQ_DMA_ERROR=7
+CONFIG_IRQ_ERROR=7
+CONFIG_IRQ_RTC=8
+CONFIG_IRQ_PPI=8
+CONFIG_IRQ_SPORT0_RX=9
+CONFIG_IRQ_SPORT0_TX=9
+CONFIG_IRQ_SPORT1_RX=9
+CONFIG_IRQ_SPORT1_TX=9
+CONFIG_IRQ_TWI=10
+CONFIG_IRQ_SPI=10
+CONFIG_IRQ_UART0_RX=10
+CONFIG_IRQ_UART0_TX=10
+CONFIG_IRQ_UART1_RX=10
+CONFIG_IRQ_UART1_TX=10
+CONFIG_IRQ_CAN_RX=11
+CONFIG_IRQ_CAN_TX=11
+CONFIG_IRQ_MAC_RX=11
+CONFIG_IRQ_MAC_TX=11
+CONFIG_IRQ_TMR0=12
+CONFIG_IRQ_TMR1=12
+CONFIG_IRQ_TMR2=12
+CONFIG_IRQ_TMR3=12
+CONFIG_IRQ_TMR4=12
+CONFIG_IRQ_TMR5=12
+CONFIG_IRQ_TMR6=12
+CONFIG_IRQ_TMR7=12
+CONFIG_IRQ_PROG_INTA=12
+CONFIG_IRQ_PORTG_INTB=12
+CONFIG_IRQ_MEM_DMA0=13
+CONFIG_IRQ_MEM_DMA1=13
+CONFIG_IRQ_WATCH=13
+
+#
+# Board customizations
+#
+
+#
+# Board Setup
+#
+CONFIG_CLKIN_HZ=25000000
+CONFIG_MEM_SIZE=64
+CONFIG_MEM_ADD_WIDTH=10
+CONFIG_BOOT_LOAD=0x1000
+
+#
+# Console UART Setup
+#
+# CONFIG_BAUD_9600 is not set
+# CONFIG_BAUD_19200 is not set
+# CONFIG_BAUD_38400 is not set
+CONFIG_BAUD_57600=y
+# CONFIG_BAUD_115200 is not set
+CONFIG_BAUD_NO_PARITY=y
+# CONFIG_BAUD_PARITY is not set
+CONFIG_BAUD_1_STOPBIT=y
+# CONFIG_BAUD_2_STOPBIT is not set
+
+#
+# Blackfin Kernel Optimizations
+#
+
+#
+# Timer Tick
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+
+#
+# Memory Optimizations
+#
+CONFIG_I_ENTRY_L1=y
+CONFIG_RAMKERNEL=y
+# CONFIG_ROMKERNEL is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_LARGE_ALLOCS=y
+CONFIG_BFIN_DMA_5XX=y
+# CONFIG_DMA_UNCACHED_2M is not set
+CONFIG_DMA_UNCACHED_1M=y
+# CONFIG_DMA_UNCACHED_NONE is not set
+
+#
+# Cache Support
+#
+CONFIG_BLKFIN_CACHE=y
+CONFIG_BLKFIN_DCACHE=y
+# CONFIG_BLKFIN_CACHE_LOCK is not set
+# CONFIG_BLKFIN_WB is not set
+CONFIG_BLKFIN_WT=y
+CONFIG_L1_MAX_PIECE=16
+
+#
+# Clock Settings
+#
+# CONFIG_BFIN_KERNEL_CLOCK is not set
+
+#
+# Asynchonous Memory Configuration
+#
+
+#
+# EBIU_AMBCTL Global Control
+#
+CONFIG_C_AMCKEN=y
+CONFIG_C_CDPRIO=y
+# CONFIG_C_AMBEN is not set
+# CONFIG_C_AMBEN_B0 is not set
+# CONFIG_C_AMBEN_B0_B1 is not set
+# CONFIG_C_AMBEN_B0_B1_B2 is not set
+CONFIG_C_AMBEN_ALL=y
+
+#
+# EBIU_AMBCTL Control
+#
+CONFIG_BANK_0=0x7BB0
+CONFIG_BANK_1=0x7BB0
+CONFIG_BANK_2=0x7BB0
+CONFIG_BANK_3=0x99B3
+
+#
+# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
+#
+# CONFIG_PCI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# PCI Hotplug Support
+#
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF_FDPIC=y
+CONFIG_BINFMT_FLAT=y
+CONFIG_BINFMT_ZFLAT=y
+# CONFIG_BINFMT_SHARED_FLAT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+CONFIG_PM_LEGACY=y
+# CONFIG_PM_DEBUG is not set
+# CONFIG_PM_SYSFS_DEPRECATED is not set
+CONFIG_PM_WAKEUP_GPIO_BY_SIC_IWR=y
+# CONFIG_PM_WAKEUP_BY_GPIO is not set
+# CONFIG_PM_WAKEUP_GPIO_API is not set
+CONFIG_PM_WAKEUP_SIC_IWR=0x80000000
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETLABEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+CONFIG_IRDA=m
+
+#
+# IrDA protocols
+#
+CONFIG_IRLAN=m
+CONFIG_IRCOMM=m
+# CONFIG_IRDA_ULTRA is not set
+
+#
+# IrDA options
+#
+CONFIG_IRDA_CACHE_LAST_LSAP=y
+# CONFIG_IRDA_FAST_RR is not set
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+CONFIG_IRTTY_SIR=m
+
+#
+# Dongle support
+#
+# CONFIG_DONGLE is not set
+
+#
+# Old SIR device drivers
+#
+# CONFIG_IRPORT_SIR is not set
+
+#
+# Old Serial dongle support
+#
+
+#
+# FIR device drivers
+#
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=m
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+CONFIG_MTD_JEDECPROBE=m
+CONFIG_MTD_GEN_PROBE=m
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_MW320D=m
+CONFIG_MTD_RAM=y
+CONFIG_MTD_ROM=m
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_BF5xx=m
+CONFIG_BFIN_FLASH_SIZE=0x400000
+CONFIG_EBIU_FLASH_BASE=0x20000000
+
+#
+# FLASH_EBIU_AMBCTL Control
+#
+CONFIG_BFIN_FLASH_BANK_0=0x7BB0
+CONFIG_BFIN_FLASH_BANK_1=0x7BB0
+CONFIG_BFIN_FLASH_BANK_2=0x7BB0
+CONFIG_BFIN_FLASH_BANK_3=0x7BB0
+CONFIG_MTD_UCLINUX=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+CONFIG_MTD_NAND=m
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+CONFIG_MTD_NAND_BFIN=m
+CONFIG_BFIN_NAND_BASE=0x20212000
+CONFIG_BFIN_NAND_CLE=2
+CONFIG_BFIN_NAND_ALE=1
+CONFIG_BFIN_NAND_READY=3
+CONFIG_MTD_NAND_IDS=m
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# Misc devices
+#
+# CONFIG_TIFM_CORE is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_NETLINK is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_SMC91X is not set
+CONFIG_BFIN_MAC=y
+CONFIG_BFIN_MAC_USE_L1=y
+CONFIG_BFIN_TX_DESC_NUM=10
+CONFIG_BFIN_RX_DESC_NUM=20
+# CONFIG_BFIN_MAC_RMII is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=m
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_UINPUT is not set
+# CONFIG_BF53X_PFBUTTONS is not set
+CONFIG_TWI_KEYPAD=m
+CONFIG_BFIN_TWIKEYPAD_IRQ_PFX=72
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_AD9960 is not set
+# CONFIG_SPI_ADC_BF533 is not set
+# CONFIG_BF533_PFLAGS is not set
+# CONFIG_BF5xx_PPIFCD is not set
+# CONFIG_BF5xx_TIMERS is not set
+# CONFIG_BF5xx_PPI is not set
+CONFIG_BFIN_SPORT=y
+# CONFIG_BFIN_TIMER_LATENCY is not set
+CONFIG_TWI_LCD=m
+CONFIG_TWI_LCD_SLAVE_ADDR=34
+# CONFIG_AD5304 is not set
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_BFIN=y
+CONFIG_SERIAL_BFIN_CONSOLE=y
+CONFIG_SERIAL_BFIN_DMA=y
+# CONFIG_SERIAL_BFIN_PIO is not set
+CONFIG_SERIAL_BFIN_UART0=y
+# CONFIG_BFIN_UART0_CTSRTS is not set
+# CONFIG_SERIAL_BFIN_UART1 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_BFIN_SPORT is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+
+#
+# CAN, the car bus and industrial fieldbus
+#
+CONFIG_CAN4LINUX=y
+
+#
+# linux embedded drivers
+#
+# CONFIG_CAN_MCF5282 is not set
+# CONFIG_CAN_UNCTWINCAN is not set
+CONFIG_CAN_BLACKFIN=m
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_GEN_RTC is not set
+CONFIG_BLACKFIN_DPMC=y
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
+# I2C support
+#
+CONFIG_I2C=m
+CONFIG_I2C_CHARDEV=m
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_BFIN_GPIO is not set
+CONFIG_I2C_BFIN_TWI=m
+CONFIG_TWICLK_KHZ=50
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_PCA_ISA is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+CONFIG_SENSORS_AD5252=m
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+CONFIG_SPI_BFIN=y
+
+#
+# SPI Protocol Masters
+#
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+CONFIG_FIRMWARE_EDID=y
+CONFIG_FB=m
+CONFIG_FB_CFB_FILLRECT=m
+CONFIG_FB_CFB_COPYAREA=m
+CONFIG_FB_CFB_IMAGEBLIT=m
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+CONFIG_FB_BFIN_7171=m
+CONFIG_FB_BFIN_7393=m
+CONFIG_NTSC=y
+# CONFIG_PAL is not set
+# CONFIG_NTSC_640x480 is not set
+# CONFIG_PAL_640x480 is not set
+# CONFIG_NTSC_YCBCR is not set
+# CONFIG_PAL_YCBCR is not set
+CONFIG_ADV7393_1XMEM=y
+# CONFIG_ADV7393_2XMEM is not set
+CONFIG_FB_BF537_LQ035=m
+CONFIG_LQ035_SLAVE_ADDR=0x58
+# CONFIG_FB_BFIN_LANDSCAPE is not set
+# CONFIG_FB_BFIN_BGR is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Logo configuration
+#
+# CONFIG_LOGO is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=m
+CONFIG_BACKLIGHT_DEVICE=y
+CONFIG_LCD_CLASS_DEVICE=m
+CONFIG_LCD_DEVICE=y
+
+#
+# Sound
+#
+CONFIG_SOUND=m
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+
+#
+# HID Devices
+#
+CONFIG_HID=y
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_SPI_MMC is not set
+# CONFIG_MMC is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# InfiniBand support
+#
+
+#
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+
+#
+# RTC drivers
+#
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_TEST is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+CONFIG_RTC_DRV_BFIN=y
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# Virtualization
+#
+
+#
+# PBX support
+#
+# CONFIG_PBX is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+# CONFIG_EXT2_FS_POSIX_ACL is not set
+# CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_YAFFS_FS=m
+CONFIG_YAFFS_YAFFS1=y
+# CONFIG_YAFFS_DOES_ECC is not set
+CONFIG_YAFFS_YAFFS2=y
+CONFIG_YAFFS_AUTO_YAFFS2=y
+# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
+CONFIG_YAFFS_CHECKPOINT_RESERVED_BLOCKS=10
+# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
+# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
+CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
+CONFIG_JFFS2_FS=m
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=m
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=m
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_HUNT_FOR_ZERO=y
+# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
+# CONFIG_BOOTPARAM is not set
+# CONFIG_NO_KERNEL_MSG is not set
+CONFIG_CPLB_INFO=y
+# CONFIG_NO_ACCESS_CHECK is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+CONFIG_SECURITY=y
+# CONFIG_SECURITY_NETWORK is not set
+CONFIG_SECURITY_CAPABILITIES=y
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y
diff --git a/arch/blackfin/kernel/Makefile b/arch/blackfin/kernel/Makefile
new file mode 100644
index 0000000..f3b7d2f
--- /dev/null
+++ b/arch/blackfin/kernel/Makefile
@@ -0,0 +1,14 @@
+#
+# arch/blackfin/kernel/Makefile
+#
+
+extra-y := init_task.o vmlinux.lds
+
+obj-y := \
+ entry.o process.o bfin_ksyms.o ptrace.o setup.o signal.o \
+ sys_bfin.o time.o traps.o irqchip.o dma-mapping.o bfin_gpio.o \
+ flat.o
+
+obj-$(CONFIG_MODULES) += module.o
+obj-$(CONFIG_BFIN_DMA_5XX) += bfin_dma_5xx.o
+obj-$(CONFIG_DUAL_CORE_TEST_MODULE) += dualcore_test.o
diff --git a/arch/blackfin/kernel/asm-offsets.c b/arch/blackfin/kernel/asm-offsets.c
new file mode 100644
index 0000000..41d9a9f
--- /dev/null
+++ b/arch/blackfin/kernel/asm-offsets.c
@@ -0,0 +1,136 @@
+/*
+ * File: arch/blackfin/kernel/asm-offsets.c
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description: generate definitions needed by assembly language modules.
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/stddef.h>
+#include <linux/sched.h>
+#include <linux/kernel_stat.h>
+#include <linux/ptrace.h>
+#include <linux/hardirq.h>
+#include <asm/irq.h>
+#include <asm/thread_info.h>
+
+#define DEFINE(sym, val) \
+ asm volatile("\n->" #sym " %0 " #val : : "i" (val))
+
+int main(void)
+{
+ /* offsets into the task struct */
+ DEFINE(TASK_STATE, offsetof(struct task_struct, state));
+ DEFINE(TASK_FLAGS, offsetof(struct task_struct, flags));
+ DEFINE(TASK_PTRACE, offsetof(struct task_struct, ptrace));
+ DEFINE(TASK_BLOCKED, offsetof(struct task_struct, blocked));
+ DEFINE(TASK_THREAD, offsetof(struct task_struct, thread));
+ DEFINE(TASK_THREAD_INFO, offsetof(struct task_struct, thread_info));
+ DEFINE(TASK_MM, offsetof(struct task_struct, mm));
+ DEFINE(TASK_ACTIVE_MM, offsetof(struct task_struct, active_mm));
+ DEFINE(TASK_SIGPENDING, offsetof(struct task_struct, pending));
+
+ /* offsets into the irq_cpustat_t struct */
+ DEFINE(CPUSTAT_SOFTIRQ_PENDING,
+ offsetof(irq_cpustat_t, __softirq_pending));
+
+ /* offsets into the thread struct */
+ DEFINE(THREAD_KSP, offsetof(struct thread_struct, ksp));
+ DEFINE(THREAD_USP, offsetof(struct thread_struct, usp));
+ DEFINE(THREAD_SR, offsetof(struct thread_struct, seqstat));
+ DEFINE(PT_SR, offsetof(struct thread_struct, seqstat));
+ DEFINE(THREAD_ESP0, offsetof(struct thread_struct, esp0));
+ DEFINE(THREAD_PC, offsetof(struct thread_struct, pc));
+ DEFINE(KERNEL_STACK_SIZE, THREAD_SIZE);
+
+ /* offsets into the pt_regs */
+ DEFINE(PT_ORIG_P0, offsetof(struct pt_regs, orig_p0));
+ DEFINE(PT_ORIG_PC, offsetof(struct pt_regs, orig_pc));
+ DEFINE(PT_R0, offsetof(struct pt_regs, r0));
+ DEFINE(PT_R1, offsetof(struct pt_regs, r1));
+ DEFINE(PT_R2, offsetof(struct pt_regs, r2));
+ DEFINE(PT_R3, offsetof(struct pt_regs, r3));
+ DEFINE(PT_R4, offsetof(struct pt_regs, r4));
+ DEFINE(PT_R5, offsetof(struct pt_regs, r5));
+ DEFINE(PT_R6, offsetof(struct pt_regs, r6));
+ DEFINE(PT_R7, offsetof(struct pt_regs, r7));
+
+ DEFINE(PT_P0, offsetof(struct pt_regs, p0));
+ DEFINE(PT_P1, offsetof(struct pt_regs, p1));
+ DEFINE(PT_P2, offsetof(struct pt_regs, p2));
+ DEFINE(PT_P3, offsetof(struct pt_regs, p3));
+ DEFINE(PT_P4, offsetof(struct pt_regs, p4));
+ DEFINE(PT_P5, offsetof(struct pt_regs, p5));
+
+ DEFINE(PT_FP, offsetof(struct pt_regs, fp));
+ DEFINE(PT_USP, offsetof(struct pt_regs, usp));
+ DEFINE(PT_I0, offsetof(struct pt_regs, i0));
+ DEFINE(PT_I1, offsetof(struct pt_regs, i1));
+ DEFINE(PT_I2, offsetof(struct pt_regs, i2));
+ DEFINE(PT_I3, offsetof(struct pt_regs, i3));
+ DEFINE(PT_M0, offsetof(struct pt_regs, m0));
+ DEFINE(PT_M1, offsetof(struct pt_regs, m1));
+ DEFINE(PT_M2, offsetof(struct pt_regs, m2));
+ DEFINE(PT_M3, offsetof(struct pt_regs, m3));
+ DEFINE(PT_L0, offsetof(struct pt_regs, l0));
+ DEFINE(PT_L1, offsetof(struct pt_regs, l1));
+ DEFINE(PT_L2, offsetof(struct pt_regs, l2));
+ DEFINE(PT_L3, offsetof(struct pt_regs, l3));
+ DEFINE(PT_B0, offsetof(struct pt_regs, b0));
+ DEFINE(PT_B1, offsetof(struct pt_regs, b1));
+ DEFINE(PT_B2, offsetof(struct pt_regs, b2));
+ DEFINE(PT_B3, offsetof(struct pt_regs, b3));
+ DEFINE(PT_A0X, offsetof(struct pt_regs, a0x));
+ DEFINE(PT_A0W, offsetof(struct pt_regs, a0w));
+ DEFINE(PT_A1X, offsetof(struct pt_regs, a1x));
+ DEFINE(PT_A1W, offsetof(struct pt_regs, a1w));
+ DEFINE(PT_LC0, offsetof(struct pt_regs, lc0));
+ DEFINE(PT_LC1, offsetof(struct pt_regs, lc1));
+ DEFINE(PT_LT0, offsetof(struct pt_regs, lt0));
+ DEFINE(PT_LT1, offsetof(struct pt_regs, lt1));
+ DEFINE(PT_LB0, offsetof(struct pt_regs, lb0));
+ DEFINE(PT_LB1, offsetof(struct pt_regs, lb1));
+ DEFINE(PT_ASTAT, offsetof(struct pt_regs, astat));
+ DEFINE(PT_RESERVED, offsetof(struct pt_regs, reserved));
+ DEFINE(PT_RETS, offsetof(struct pt_regs, rets));
+ DEFINE(PT_PC, offsetof(struct pt_regs, pc));
+ DEFINE(PT_RETX, offsetof(struct pt_regs, retx));
+ DEFINE(PT_RETN, offsetof(struct pt_regs, retn));
+ DEFINE(PT_RETE, offsetof(struct pt_regs, rete));
+ DEFINE(PT_SEQSTAT, offsetof(struct pt_regs, seqstat));
+ DEFINE(PT_SYSCFG, offsetof(struct pt_regs, syscfg));
+ DEFINE(PT_IPEND, offsetof(struct pt_regs, ipend));
+ DEFINE(SIZEOF_PTREGS, sizeof(struct pt_regs));
+ DEFINE(PT_TEXT_ADDR, sizeof(struct pt_regs)); /* Needed by gdb */
+ DEFINE(PT_TEXT_END_ADDR, 4 + sizeof(struct pt_regs));/* Needed by gdb */
+ DEFINE(PT_DATA_ADDR, 8 + sizeof(struct pt_regs)); /* Needed by gdb */
+ DEFINE(PT_FDPIC_EXEC, 12 + sizeof(struct pt_regs)); /* Needed by gdb */
+ DEFINE(PT_FDPIC_INTERP, 16 + sizeof(struct pt_regs));/* Needed by gdb */
+
+ /* signal defines */
+ DEFINE(SIGSEGV, SIGSEGV);
+ DEFINE(SIGTRAP, SIGTRAP);
+
+ return 0;
+}
diff --git a/arch/blackfin/kernel/bfin_dma_5xx.c b/arch/blackfin/kernel/bfin_dma_5xx.c
new file mode 100644
index 0000000..8ea079e
--- /dev/null
+++ b/arch/blackfin/kernel/bfin_dma_5xx.c
@@ -0,0 +1,742 @@
+/*
+ * File: arch/blackfin/kernel/bfin_dma_5xx.c
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description: This file contains the simple DMA Implementation for Blackfin
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/param.h>
+
+#include <asm/dma.h>
+#include <asm/cacheflush.h>
+
+/* Remove unused code not exported by symbol or internally called */
+#define REMOVE_DEAD_CODE
+
+/**************************************************************************
+ * Global Variables
+***************************************************************************/
+
+static struct dma_channel dma_ch[MAX_BLACKFIN_DMA_CHANNEL];
+#if defined (CONFIG_BF561)
+static struct dma_register *base_addr[MAX_BLACKFIN_DMA_CHANNEL] = {
+ (struct dma_register *) DMA1_0_NEXT_DESC_PTR,
+ (struct dma_register *) DMA1_1_NEXT_DESC_PTR,
+ (struct dma_register *) DMA1_2_NEXT_DESC_PTR,
+ (struct dma_register *) DMA1_3_NEXT_DESC_PTR,
+ (struct dma_register *) DMA1_4_NEXT_DESC_PTR,
+ (struct dma_register *) DMA1_5_NEXT_DESC_PTR,
+ (struct dma_register *) DMA1_6_NEXT_DESC_PTR,
+ (struct dma_register *) DMA1_7_NEXT_DESC_PTR,
+ (struct dma_register *) DMA1_8_NEXT_DESC_PTR,
+ (struct dma_register *) DMA1_9_NEXT_DESC_PTR,
+ (struct dma_register *) DMA1_10_NEXT_DESC_PTR,
+ (struct dma_register *) DMA1_11_NEXT_DESC_PTR,
+ (struct dma_register *) DMA2_0_NEXT_DESC_PTR,
+ (struct dma_register *) DMA2_1_NEXT_DESC_PTR,
+ (struct dma_register *) DMA2_2_NEXT_DESC_PTR,
+ (struct dma_register *) DMA2_3_NEXT_DESC_PTR,
+ (struct dma_register *) DMA2_4_NEXT_DESC_PTR,
+ (struct dma_register *) DMA2_5_NEXT_DESC_PTR,
+ (struct dma_register *) DMA2_6_NEXT_DESC_PTR,
+ (struct dma_register *) DMA2_7_NEXT_DESC_PTR,
+ (struct dma_register *) DMA2_8_NEXT_DESC_PTR,
+ (struct dma_register *) DMA2_9_NEXT_DESC_PTR,
+ (struct dma_register *) DMA2_10_NEXT_DESC_PTR,
+ (struct dma_register *) DMA2_11_NEXT_DESC_PTR,
+ (struct dma_register *) MDMA1_D0_NEXT_DESC_PTR,
+ (struct dma_register *) MDMA1_S0_NEXT_DESC_PTR,
+ (struct dma_register *) MDMA1_D1_NEXT_DESC_PTR,
+ (struct dma_register *) MDMA1_S1_NEXT_DESC_PTR,
+ (struct dma_register *) MDMA2_D0_NEXT_DESC_PTR,
+ (struct dma_register *) MDMA2_S0_NEXT_DESC_PTR,
+ (struct dma_register *) MDMA2_D1_NEXT_DESC_PTR,
+ (struct dma_register *) MDMA2_S1_NEXT_DESC_PTR,
+ (struct dma_register *) IMDMA_D0_NEXT_DESC_PTR,
+ (struct dma_register *) IMDMA_S0_NEXT_DESC_PTR,
+ (struct dma_register *) IMDMA_D1_NEXT_DESC_PTR,
+ (struct dma_register *) IMDMA_S1_NEXT_DESC_PTR,
+};
+#else
+static struct dma_register *base_addr[MAX_BLACKFIN_DMA_CHANNEL] = {
+ (struct dma_register *) DMA0_NEXT_DESC_PTR,
+ (struct dma_register *) DMA1_NEXT_DESC_PTR,
+ (struct dma_register *) DMA2_NEXT_DESC_PTR,
+ (struct dma_register *) DMA3_NEXT_DESC_PTR,
+ (struct dma_register *) DMA4_NEXT_DESC_PTR,
+ (struct dma_register *) DMA5_NEXT_DESC_PTR,
+ (struct dma_register *) DMA6_NEXT_DESC_PTR,
+ (struct dma_register *) DMA7_NEXT_DESC_PTR,
+#if (defined(CONFIG_BF537) || defined(CONFIG_BF534) || defined(CONFIG_BF536))
+ (struct dma_register *) DMA8_NEXT_DESC_PTR,
+ (struct dma_register *) DMA9_NEXT_DESC_PTR,
+ (struct dma_register *) DMA10_NEXT_DESC_PTR,
+ (struct dma_register *) DMA11_NEXT_DESC_PTR,
+#endif
+ (struct dma_register *) MDMA_D0_NEXT_DESC_PTR,
+ (struct dma_register *) MDMA_S0_NEXT_DESC_PTR,
+ (struct dma_register *) MDMA_D1_NEXT_DESC_PTR,
+ (struct dma_register *) MDMA_S1_NEXT_DESC_PTR,
+};
+#endif
+
+/*------------------------------------------------------------------------------
+ * Set the Buffer Clear bit in the Configuration register of specific DMA
+ * channel. This will stop the descriptor based DMA operation.
+ *-----------------------------------------------------------------------------*/
+static void clear_dma_buffer(unsigned int channel)
+{
+ dma_ch[channel].regs->cfg |= RESTART;
+ SSYNC();
+ dma_ch[channel].regs->cfg &= ~RESTART;
+ SSYNC();
+}
+
+int __init blackfin_dma_init(void)
+{
+ int i;
+
+ printk(KERN_INFO "Blackfin DMA Controller\n");
+
+ for (i = 0; i < MAX_BLACKFIN_DMA_CHANNEL; i++) {
+ dma_ch[i].chan_status = DMA_CHANNEL_FREE;
+ dma_ch[i].regs = base_addr[i];
+ mutex_init(&(dma_ch[i].dmalock));
+ }
+
+ return 0;
+}
+
+arch_initcall(blackfin_dma_init);
+
+/*
+ * Form the channel find the irq number for that channel.
+ */
+#if !defined(CONFIG_BF561)
+
+static int bf533_channel2irq(unsigned int channel)
+{
+ int ret_irq = -1;
+
+ switch (channel) {
+ case CH_PPI:
+ ret_irq = IRQ_PPI;
+ break;
+
+#if (defined(CONFIG_BF537) || defined(CONFIG_BF534) || defined(CONFIG_BF536))
+ case CH_EMAC_RX:
+ ret_irq = IRQ_MAC_RX;
+ break;
+
+ case CH_EMAC_TX:
+ ret_irq = IRQ_MAC_TX;
+ break;
+
+ case CH_UART1_RX:
+ ret_irq = IRQ_UART1_RX;
+ break;
+
+ case CH_UART1_TX:
+ ret_irq = IRQ_UART1_TX;
+ break;
+#endif
+
+ case CH_SPORT0_RX:
+ ret_irq = IRQ_SPORT0_RX;
+ break;
+
+ case CH_SPORT0_TX:
+ ret_irq = IRQ_SPORT0_TX;
+ break;
+
+ case CH_SPORT1_RX:
+ ret_irq = IRQ_SPORT1_RX;
+ break;
+
+ case CH_SPORT1_TX:
+ ret_irq = IRQ_SPORT1_TX;
+ break;
+
+ case CH_SPI:
+ ret_irq = IRQ_SPI;
+ break;
+
+ case CH_UART_RX:
+ ret_irq = IRQ_UART_RX;
+ break;
+
+ case CH_UART_TX:
+ ret_irq = IRQ_UART_TX;
+ break;
+
+ case CH_MEM_STREAM0_SRC:
+ case CH_MEM_STREAM0_DEST:
+ ret_irq = IRQ_MEM_DMA0;
+ break;
+
+ case CH_MEM_STREAM1_SRC:
+ case CH_MEM_STREAM1_DEST:
+ ret_irq = IRQ_MEM_DMA1;
+ break;
+ }
+ return ret_irq;
+}
+
+# define channel2irq(channel) bf533_channel2irq(channel)
+
+#else
+
+static int bf561_channel2irq(unsigned int channel)
+{
+ int ret_irq = -1;
+
+ switch (channel) {
+ case CH_PPI0:
+ ret_irq = IRQ_PPI0;
+ break;
+ case CH_PPI1:
+ ret_irq = IRQ_PPI1;
+ break;
+ case CH_SPORT0_RX:
+ ret_irq = IRQ_SPORT0_RX;
+ break;
+ case CH_SPORT0_TX:
+ ret_irq = IRQ_SPORT0_TX;
+ break;
+ case CH_SPORT1_RX:
+ ret_irq = IRQ_SPORT1_RX;
+ break;
+ case CH_SPORT1_TX:
+ ret_irq = IRQ_SPORT1_TX;
+ break;
+ case CH_SPI:
+ ret_irq = IRQ_SPI;
+ break;
+ case CH_UART_RX:
+ ret_irq = IRQ_UART_RX;
+ break;
+ case CH_UART_TX:
+ ret_irq = IRQ_UART_TX;
+ break;
+
+ case CH_MEM_STREAM0_SRC:
+ case CH_MEM_STREAM0_DEST:
+ ret_irq = IRQ_MEM_DMA0;
+ break;
+ case CH_MEM_STREAM1_SRC:
+ case CH_MEM_STREAM1_DEST:
+ ret_irq = IRQ_MEM_DMA1;
+ break;
+ case CH_MEM_STREAM2_SRC:
+ case CH_MEM_STREAM2_DEST:
+ ret_irq = IRQ_MEM_DMA2;
+ break;
+ case CH_MEM_STREAM3_SRC:
+ case CH_MEM_STREAM3_DEST:
+ ret_irq = IRQ_MEM_DMA3;
+ break;
+
+ case CH_IMEM_STREAM0_SRC:
+ case CH_IMEM_STREAM0_DEST:
+ ret_irq = IRQ_IMEM_DMA0;
+ break;
+ case CH_IMEM_STREAM1_SRC:
+ case CH_IMEM_STREAM1_DEST:
+ ret_irq = IRQ_IMEM_DMA1;
+ break;
+ }
+ return ret_irq;
+}
+
+# define channel2irq(channel) bf561_channel2irq(channel)
+
+#endif
+
+/*------------------------------------------------------------------------------
+ * Request the specific DMA channel from the system.
+ *-----------------------------------------------------------------------------*/
+int request_dma(unsigned int channel, char *device_id)
+{
+
+ pr_debug("request_dma() : BEGIN \n");
+ mutex_lock(&(dma_ch[channel].dmalock));
+
+ if ((dma_ch[channel].chan_status == DMA_CHANNEL_REQUESTED)
+ || (dma_ch[channel].chan_status == DMA_CHANNEL_ENABLED)) {
+ mutex_unlock(&(dma_ch[channel].dmalock));
+ pr_debug("DMA CHANNEL IN USE \n");
+ return -EBUSY;
+ } else {
+ dma_ch[channel].chan_status = DMA_CHANNEL_REQUESTED;
+ pr_debug("DMA CHANNEL IS ALLOCATED \n");
+ }
+
+ mutex_unlock(&(dma_ch[channel].dmalock));
+
+ dma_ch[channel].device_id = device_id;
+ dma_ch[channel].irq_callback = NULL;
+
+ /* This is to be enabled by putting a restriction -
+ * you have to request DMA, before doing any operations on
+ * descriptor/channel
+ */
+ pr_debug("request_dma() : END \n");
+ return channel;
+}
+EXPORT_SYMBOL(request_dma);
+
+int set_dma_callback(unsigned int channel, dma_interrupt_t callback, void *data)
+{
+ int ret_irq = 0;
+
+ BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE
+ && channel < MAX_BLACKFIN_DMA_CHANNEL));
+
+ if (callback != NULL) {
+ int ret_val;
+ ret_irq = channel2irq(channel);
+
+ dma_ch[channel].data = data;
+
+ ret_val =
+ request_irq(ret_irq, (void *)callback, IRQF_DISABLED,
+ dma_ch[channel].device_id, data);
+ if (ret_val) {
+ printk(KERN_NOTICE
+ "Request irq in DMA engine failed.\n");
+ return -EPERM;
+ }
+ dma_ch[channel].irq_callback = callback;
+ }
+ return 0;
+}
+EXPORT_SYMBOL(set_dma_callback);
+
+void free_dma(unsigned int channel)
+{
+ int ret_irq;
+
+ pr_debug("freedma() : BEGIN \n");
+ BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE
+ && channel < MAX_BLACKFIN_DMA_CHANNEL));
+
+ /* Halt the DMA */
+ disable_dma(channel);
+ clear_dma_buffer(channel);
+
+ if (dma_ch[channel].irq_callback != NULL) {
+ ret_irq = channel2irq(channel);
+ free_irq(ret_irq, dma_ch[channel].data);
+ }
+
+ /* Clear the DMA Variable in the Channel */
+ mutex_lock(&(dma_ch[channel].dmalock));
+ dma_ch[channel].chan_status = DMA_CHANNEL_FREE;
+ mutex_unlock(&(dma_ch[channel].dmalock));
+
+ pr_debug("freedma() : END \n");
+}
+EXPORT_SYMBOL(free_dma);
+
+void dma_enable_irq(unsigned int channel)
+{
+ int ret_irq;
+
+ pr_debug("dma_enable_irq() : BEGIN \n");
+ BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE
+ && channel < MAX_BLACKFIN_DMA_CHANNEL));
+
+ ret_irq = channel2irq(channel);
+ enable_irq(ret_irq);
+}
+EXPORT_SYMBOL(dma_enable_irq);
+
+void dma_disable_irq(unsigned int channel)
+{
+ int ret_irq;
+
+ pr_debug("dma_disable_irq() : BEGIN \n");
+ BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE
+ && channel < MAX_BLACKFIN_DMA_CHANNEL));
+
+ ret_irq = channel2irq(channel);
+ disable_irq(ret_irq);
+}
+EXPORT_SYMBOL(dma_disable_irq);
+
+int dma_channel_active(unsigned int channel)
+{
+ if (dma_ch[channel].chan_status == DMA_CHANNEL_FREE) {
+ return 0;
+ } else {
+ return 1;
+ }
+}
+EXPORT_SYMBOL(dma_channel_active);
+
+/*------------------------------------------------------------------------------
+* stop the specific DMA channel.
+*-----------------------------------------------------------------------------*/
+void disable_dma(unsigned int channel)
+{
+ pr_debug("stop_dma() : BEGIN \n");
+
+ BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE
+ && channel < MAX_BLACKFIN_DMA_CHANNEL));
+
+ dma_ch[channel].regs->cfg &= ~DMAEN; /* Clean the enable bit */
+ SSYNC();
+ dma_ch[channel].chan_status = DMA_CHANNEL_REQUESTED;
+ /* Needs to be enabled Later */
+ pr_debug("stop_dma() : END \n");
+ return;
+}
+EXPORT_SYMBOL(disable_dma);
+
+void enable_dma(unsigned int channel)
+{
+ pr_debug("enable_dma() : BEGIN \n");
+
+ BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE
+ && channel < MAX_BLACKFIN_DMA_CHANNEL));
+
+ dma_ch[channel].chan_status = DMA_CHANNEL_ENABLED;
+ dma_ch[channel].regs->curr_x_count = 0;
+ dma_ch[channel].regs->curr_y_count = 0;
+
+ dma_ch[channel].regs->cfg |= DMAEN; /* Set the enable bit */
+ SSYNC();
+ pr_debug("enable_dma() : END \n");
+ return;
+}
+EXPORT_SYMBOL(enable_dma);
+
+/*------------------------------------------------------------------------------
+* Set the Start Address register for the specific DMA channel
+* This function can be used for register based DMA,
+* to setup the start address
+* addr: Starting address of the DMA Data to be transferred.
+*-----------------------------------------------------------------------------*/
+void set_dma_start_addr(unsigned int channel, unsigned long addr)
+{
+ pr_debug("set_dma_start_addr() : BEGIN \n");
+
+ BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE
+ && channel < MAX_BLACKFIN_DMA_CHANNEL));
+
+ dma_ch[channel].regs->start_addr = addr;
+ SSYNC();
+ pr_debug("set_dma_start_addr() : END\n");
+}
+EXPORT_SYMBOL(set_dma_start_addr);
+
+void set_dma_next_desc_addr(unsigned int channel, unsigned long addr)
+{
+ pr_debug("set_dma_next_desc_addr() : BEGIN \n");
+
+ BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE
+ && channel < MAX_BLACKFIN_DMA_CHANNEL));
+
+ dma_ch[channel].regs->next_desc_ptr = addr;
+ SSYNC();
+ pr_debug("set_dma_start_addr() : END\n");
+}
+EXPORT_SYMBOL(set_dma_next_desc_addr);
+
+void set_dma_x_count(unsigned int channel, unsigned short x_count)
+{
+ BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE
+ && channel < MAX_BLACKFIN_DMA_CHANNEL));
+
+ dma_ch[channel].regs->x_count = x_count;
+ SSYNC();
+}
+EXPORT_SYMBOL(set_dma_x_count);
+
+void set_dma_y_count(unsigned int channel, unsigned short y_count)
+{
+ BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE
+ && channel < MAX_BLACKFIN_DMA_CHANNEL));
+
+ dma_ch[channel].regs->y_count = y_count;
+ SSYNC();
+}
+EXPORT_SYMBOL(set_dma_y_count);
+
+void set_dma_x_modify(unsigned int channel, short x_modify)
+{
+ BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE
+ && channel < MAX_BLACKFIN_DMA_CHANNEL));
+
+ dma_ch[channel].regs->x_modify = x_modify;
+ SSYNC();
+}
+EXPORT_SYMBOL(set_dma_x_modify);
+
+void set_dma_y_modify(unsigned int channel, short y_modify)
+{
+ BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE
+ && channel < MAX_BLACKFIN_DMA_CHANNEL));
+
+ dma_ch[channel].regs->y_modify = y_modify;
+ SSYNC();
+}
+EXPORT_SYMBOL(set_dma_y_modify);
+
+void set_dma_config(unsigned int channel, unsigned short config)
+{
+ BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE
+ && channel < MAX_BLACKFIN_DMA_CHANNEL));
+
+ dma_ch[channel].regs->cfg = config;
+ SSYNC();
+}
+EXPORT_SYMBOL(set_dma_config);
+
+unsigned short
+set_bfin_dma_config(char direction, char flow_mode,
+ char intr_mode, char dma_mode, char width)
+{
+ unsigned short config;
+
+ config =
+ ((direction << 1) | (width << 2) | (dma_mode << 4) |
+ (intr_mode << 6) | (flow_mode << 12) | RESTART);
+ return config;
+}
+EXPORT_SYMBOL(set_bfin_dma_config);
+
+void set_dma_sg(unsigned int channel, struct dmasg * sg, int nr_sg)
+{
+ BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE
+ && channel < MAX_BLACKFIN_DMA_CHANNEL));
+
+ dma_ch[channel].regs->cfg |= ((nr_sg & 0x0F) << 8);
+
+ dma_ch[channel].regs->next_desc_ptr = (unsigned int)sg;
+
+ SSYNC();
+}
+EXPORT_SYMBOL(set_dma_sg);
+
+/*------------------------------------------------------------------------------
+ * Get the DMA status of a specific DMA channel from the system.
+ *-----------------------------------------------------------------------------*/
+unsigned short get_dma_curr_irqstat(unsigned int channel)
+{
+ BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE
+ && channel < MAX_BLACKFIN_DMA_CHANNEL));
+
+ return dma_ch[channel].regs->irq_status;
+}
+EXPORT_SYMBOL(get_dma_curr_irqstat);
+
+/*------------------------------------------------------------------------------
+ * Clear the DMA_DONE bit in DMA status. Stop the DMA completion interrupt.
+ *-----------------------------------------------------------------------------*/
+void clear_dma_irqstat(unsigned int channel)
+{
+ BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE
+ && channel < MAX_BLACKFIN_DMA_CHANNEL));
+ dma_ch[channel].regs->irq_status |= 3;
+}
+EXPORT_SYMBOL(clear_dma_irqstat);
+
+/*------------------------------------------------------------------------------
+ * Get current DMA xcount of a specific DMA channel from the system.
+ *-----------------------------------------------------------------------------*/
+unsigned short get_dma_curr_xcount(unsigned int channel)
+{
+ BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE
+ && channel < MAX_BLACKFIN_DMA_CHANNEL));
+
+ return dma_ch[channel].regs->curr_x_count;
+}
+EXPORT_SYMBOL(get_dma_curr_xcount);
+
+/*------------------------------------------------------------------------------
+ * Get current DMA ycount of a specific DMA channel from the system.
+ *-----------------------------------------------------------------------------*/
+unsigned short get_dma_curr_ycount(unsigned int channel)
+{
+ BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE
+ && channel < MAX_BLACKFIN_DMA_CHANNEL));
+
+ return dma_ch[channel].regs->curr_y_count;
+}
+EXPORT_SYMBOL(get_dma_curr_ycount);
+
+void *dma_memcpy(void *dest, const void *src, size_t size)
+{
+ int direction; /* 1 - address decrease, 0 - address increase */
+ int flag_align; /* 1 - address aligned, 0 - address unaligned */
+ int flag_2D; /* 1 - 2D DMA needed, 0 - 1D DMA needed */
+
+ if (size <= 0)
+ return NULL;
+
+ if ((unsigned long)src < memory_end)
+ blackfin_dcache_flush_range((unsigned int)src,
+ (unsigned int)(src + size));
+
+ bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR);
+
+ if ((unsigned long)src < (unsigned long)dest)
+ direction = 1;
+ else
+ direction = 0;
+
+ if ((((unsigned long)dest % 2) == 0) && (((unsigned long)src % 2) == 0)
+ && ((size % 2) == 0))
+ flag_align = 1;
+ else
+ flag_align = 0;
+
+ if (size > 0x10000) /* size > 64K */
+ flag_2D = 1;
+ else
+ flag_2D = 0;
+
+ /* Setup destination and source start address */
+ if (direction) {
+ if (flag_align) {
+ bfin_write_MDMA_D0_START_ADDR(dest + size - 2);
+ bfin_write_MDMA_S0_START_ADDR(src + size - 2);
+ } else {
+ bfin_write_MDMA_D0_START_ADDR(dest + size - 1);
+ bfin_write_MDMA_S0_START_ADDR(src + size - 1);
+ }
+ } else {
+ bfin_write_MDMA_D0_START_ADDR(dest);
+ bfin_write_MDMA_S0_START_ADDR(src);
+ }
+
+ /* Setup destination and source xcount */
+ if (flag_2D) {
+ if (flag_align) {
+ bfin_write_MDMA_D0_X_COUNT(1024 / 2);
+ bfin_write_MDMA_S0_X_COUNT(1024 / 2);
+ } else {
+ bfin_write_MDMA_D0_X_COUNT(1024);
+ bfin_write_MDMA_S0_X_COUNT(1024);
+ }
+ bfin_write_MDMA_D0_Y_COUNT(size >> 10);
+ bfin_write_MDMA_S0_Y_COUNT(size >> 10);
+ } else {
+ if (flag_align) {
+ bfin_write_MDMA_D0_X_COUNT(size / 2);
+ bfin_write_MDMA_S0_X_COUNT(size / 2);
+ } else {
+ bfin_write_MDMA_D0_X_COUNT(size);
+ bfin_write_MDMA_S0_X_COUNT(size);
+ }
+ }
+
+ /* Setup destination and source xmodify and ymodify */
+ if (direction) {
+ if (flag_align) {
+ bfin_write_MDMA_D0_X_MODIFY(-2);
+ bfin_write_MDMA_S0_X_MODIFY(-2);
+ if (flag_2D) {
+ bfin_write_MDMA_D0_Y_MODIFY(-2);
+ bfin_write_MDMA_S0_Y_MODIFY(-2);
+ }
+ } else {
+ bfin_write_MDMA_D0_X_MODIFY(-1);
+ bfin_write_MDMA_S0_X_MODIFY(-1);
+ if (flag_2D) {
+ bfin_write_MDMA_D0_Y_MODIFY(-1);
+ bfin_write_MDMA_S0_Y_MODIFY(-1);
+ }
+ }
+ } else {
+ if (flag_align) {
+ bfin_write_MDMA_D0_X_MODIFY(2);
+ bfin_write_MDMA_S0_X_MODIFY(2);
+ if (flag_2D) {
+ bfin_write_MDMA_D0_Y_MODIFY(2);
+ bfin_write_MDMA_S0_Y_MODIFY(2);
+ }
+ } else {
+ bfin_write_MDMA_D0_X_MODIFY(1);
+ bfin_write_MDMA_S0_X_MODIFY(1);
+ if (flag_2D) {
+ bfin_write_MDMA_D0_Y_MODIFY(1);
+ bfin_write_MDMA_S0_Y_MODIFY(1);
+ }
+ }
+ }
+
+ /* Enable source DMA */
+ if (flag_2D) {
+ if (flag_align) {
+ bfin_write_MDMA_S0_CONFIG(DMAEN | DMA2D | WDSIZE_16);
+ bfin_write_MDMA_D0_CONFIG(WNR | DI_EN | DMAEN | DMA2D | WDSIZE_16);
+ } else {
+ bfin_write_MDMA_S0_CONFIG(DMAEN | DMA2D);
+ bfin_write_MDMA_D0_CONFIG(WNR | DI_EN | DMAEN | DMA2D);
+ }
+ } else {
+ if (flag_align) {
+ bfin_write_MDMA_S0_CONFIG(DMAEN | WDSIZE_16);
+ bfin_write_MDMA_D0_CONFIG(WNR | DI_EN | DMAEN | WDSIZE_16);
+ } else {
+ bfin_write_MDMA_S0_CONFIG(DMAEN);
+ bfin_write_MDMA_D0_CONFIG(WNR | DI_EN | DMAEN);
+ }
+ }
+
+ while (!(bfin_read_MDMA_D0_IRQ_STATUS() & DMA_DONE))
+ ;
+
+ bfin_write_MDMA_D0_IRQ_STATUS(bfin_read_MDMA_D0_IRQ_STATUS() |
+ (DMA_DONE | DMA_ERR));
+
+ bfin_write_MDMA_S0_CONFIG(0);
+ bfin_write_MDMA_D0_CONFIG(0);
+
+ if ((unsigned long)dest < memory_end)
+ blackfin_dcache_invalidate_range((unsigned int)dest,
+ (unsigned int)(dest + size));
+
+ return dest;
+}
+EXPORT_SYMBOL(dma_memcpy);
+
+void *safe_dma_memcpy(void *dest, const void *src, size_t size)
+{
+ int flags = 0;
+ void *addr;
+ local_irq_save(flags);
+ addr = dma_memcpy(dest, src, size);
+ local_irq_restore(flags);
+ return addr;
+}
+EXPORT_SYMBOL(safe_dma_memcpy);
diff --git a/arch/blackfin/kernel/bfin_gpio.c b/arch/blackfin/kernel/bfin_gpio.c
new file mode 100644
index 0000000..e9f24a9
--- /dev/null
+++ b/arch/blackfin/kernel/bfin_gpio.c
@@ -0,0 +1,637 @@
+/*
+ * File: arch/blackfin/kernel/bfin_gpio.c
+ * Based on:
+ * Author: Michael Hennerich (hennerich@blackfin.uclinux.org)
+ *
+ * Created:
+ * Description: GPIO Abstraction Layer
+ *
+ * Modified:
+ * Copyright 2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/*
+* Number BF537/6/4 BF561 BF533/2/1
+*
+* GPIO_0 PF0 PF0 PF0
+* GPIO_1 PF1 PF1 PF1
+* GPIO_2 PF2 PF2 PF2
+* GPIO_3 PF3 PF3 PF3
+* GPIO_4 PF4 PF4 PF4
+* GPIO_5 PF5 PF5 PF5
+* GPIO_6 PF6 PF6 PF6
+* GPIO_7 PF7 PF7 PF7
+* GPIO_8 PF8 PF8 PF8
+* GPIO_9 PF9 PF9 PF9
+* GPIO_10 PF10 PF10 PF10
+* GPIO_11 PF11 PF11 PF11
+* GPIO_12 PF12 PF12 PF12
+* GPIO_13 PF13 PF13 PF13
+* GPIO_14 PF14 PF14 PF14
+* GPIO_15 PF15 PF15 PF15
+* GPIO_16 PG0 PF16
+* GPIO_17 PG1 PF17
+* GPIO_18 PG2 PF18
+* GPIO_19 PG3 PF19
+* GPIO_20 PG4 PF20
+* GPIO_21 PG5 PF21
+* GPIO_22 PG6 PF22
+* GPIO_23 PG7 PF23
+* GPIO_24 PG8 PF24
+* GPIO_25 PG9 PF25
+* GPIO_26 PG10 PF26
+* GPIO_27 PG11 PF27
+* GPIO_28 PG12 PF28
+* GPIO_29 PG13 PF29
+* GPIO_30 PG14 PF30
+* GPIO_31 PG15 PF31
+* GPIO_32 PH0 PF32
+* GPIO_33 PH1 PF33
+* GPIO_34 PH2 PF34
+* GPIO_35 PH3 PF35
+* GPIO_36 PH4 PF36
+* GPIO_37 PH5 PF37
+* GPIO_38 PH6 PF38
+* GPIO_39 PH7 PF39
+* GPIO_40 PH8 PF40
+* GPIO_41 PH9 PF41
+* GPIO_42 PH10 PF42
+* GPIO_43 PH11 PF43
+* GPIO_44 PH12 PF44
+* GPIO_45 PH13 PF45
+* GPIO_46 PH14 PF46
+* GPIO_47 PH15 PF47
+*/
+
+#include <linux/module.h>
+#include <linux/err.h>
+#include <asm/blackfin.h>
+#include <asm/gpio.h>
+#include <linux/irq.h>
+
+#ifdef BF533_FAMILY
+static struct gpio_port_t *gpio_bankb[gpio_bank(MAX_BLACKFIN_GPIOS)] = {
+ (struct gpio_port_t *) FIO_FLAG_D,
+};
+#endif
+
+#ifdef BF537_FAMILY
+static struct gpio_port_t *gpio_bankb[gpio_bank(MAX_BLACKFIN_GPIOS)] = {
+ (struct gpio_port_t *) PORTFIO,
+ (struct gpio_port_t *) PORTGIO,
+ (struct gpio_port_t *) PORTHIO,
+};
+
+static unsigned short *port_fer[gpio_bank(MAX_BLACKFIN_GPIOS)] = {
+ (unsigned short *) PORTF_FER,
+ (unsigned short *) PORTG_FER,
+ (unsigned short *) PORTH_FER,
+};
+
+#endif
+
+#ifdef BF561_FAMILY
+static struct gpio_port_t *gpio_bankb[gpio_bank(MAX_BLACKFIN_GPIOS)] = {
+ (struct gpio_port_t *) FIO0_FLAG_D,
+ (struct gpio_port_t *) FIO1_FLAG_D,
+ (struct gpio_port_t *) FIO2_FLAG_D,
+};
+#endif
+
+static unsigned short reserved_map[gpio_bank(MAX_BLACKFIN_GPIOS)];
+
+#ifdef CONFIG_PM
+static unsigned short wakeup_map[gpio_bank(MAX_BLACKFIN_GPIOS)];
+static unsigned char wakeup_flags_map[MAX_BLACKFIN_GPIOS];
+static struct gpio_port_s gpio_bank_saved[gpio_bank(MAX_BLACKFIN_GPIOS)];
+
+#ifdef BF533_FAMILY
+static unsigned int sic_iwr_irqs[gpio_bank(MAX_BLACKFIN_GPIOS)] = {IRQ_PROG_INTB};
+#endif
+
+#ifdef BF537_FAMILY
+static unsigned int sic_iwr_irqs[gpio_bank(MAX_BLACKFIN_GPIOS)] = {IRQ_PROG_INTB, IRQ_PORTG_INTB, IRQ_MAC_TX};
+#endif
+
+#ifdef BF561_FAMILY
+static unsigned int sic_iwr_irqs[gpio_bank(MAX_BLACKFIN_GPIOS)] = {IRQ_PROG0_INTB, IRQ_PROG1_INTB, IRQ_PROG2_INTB};
+#endif
+
+#endif /* CONFIG_PM */
+
+inline int check_gpio(unsigned short gpio)
+{
+ if (gpio > MAX_BLACKFIN_GPIOS)
+ return -EINVAL;
+ return 0;
+}
+
+#ifdef BF537_FAMILY
+void port_setup(unsigned short gpio, unsigned short usage)
+{
+ if (usage == GPIO_USAGE) {
+ if (*port_fer[gpio_bank(gpio)] & gpio_bit(gpio))
+ printk(KERN_WARNING "bfin-gpio: Possible Conflict with Peripheral "
+ "usage and GPIO %d detected!\n", gpio);
+ *port_fer[gpio_bank(gpio)] &= ~gpio_bit(gpio);
+ } else
+ *port_fer[gpio_bank(gpio)] |= gpio_bit(gpio);
+ SSYNC();
+}
+#else
+# define port_setup(...) do { } while (0)
+#endif
+
+
+void default_gpio(unsigned short gpio)
+{
+ unsigned short bank,bitmask;
+
+ bank = gpio_bank(gpio);
+ bitmask = gpio_bit(gpio);
+
+ gpio_bankb[bank]->maska_clear = bitmask;
+ gpio_bankb[bank]->maskb_clear = bitmask;
+ SSYNC();
+ gpio_bankb[bank]->inen &= ~bitmask;
+ gpio_bankb[bank]->dir &= ~bitmask;
+ gpio_bankb[bank]->polar &= ~bitmask;
+ gpio_bankb[bank]->both &= ~bitmask;
+ gpio_bankb[bank]->edge &= ~bitmask;
+}
+
+
+int __init bfin_gpio_init(void)
+{
+ int i;
+
+ printk(KERN_INFO "Blackfin GPIO Controller\n");
+
+ for (i = 0; i < MAX_BLACKFIN_GPIOS; i+=GPIO_BANKSIZE)
+ reserved_map[gpio_bank(i)] = 0;
+
+#if defined(BF537_FAMILY) && (defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE))
+# if defined(CONFIG_BFIN_MAC_RMII)
+ reserved_map[PORT_H] = 0xC373;
+# else
+ reserved_map[PORT_H] = 0xFFFF;
+# endif
+#endif
+
+ return 0;
+}
+
+arch_initcall(bfin_gpio_init);
+
+
+/***********************************************************
+*
+* FUNCTIONS: Blackfin General Purpose Ports Access Functions
+*
+* INPUTS/OUTPUTS:
+* gpio - GPIO Number between 0 and MAX_BLACKFIN_GPIOS
+*
+*
+* DESCRIPTION: These functions abstract direct register access
+* to Blackfin processor General Purpose
+* Ports Regsiters
+*
+* CAUTION: These functions do not belong to the GPIO Driver API
+*************************************************************
+* MODIFICATION HISTORY :
+**************************************************************/
+
+/* Set a specific bit */
+
+#define SET_GPIO(name) \
+void set_gpio_ ## name(unsigned short gpio, unsigned short arg) \
+{ \
+ unsigned long flags; \
+ BUG_ON(!(reserved_map[gpio_bank(gpio)] & gpio_bit(gpio))); \
+ local_irq_save(flags); \
+ if (arg) \
+ gpio_bankb[gpio_bank(gpio)]->name |= gpio_bit(gpio); \
+ else \
+ gpio_bankb[gpio_bank(gpio)]->name &= ~gpio_bit(gpio); \
+ local_irq_restore(flags); \
+} \
+EXPORT_SYMBOL(set_gpio_ ## name);
+
+SET_GPIO(dir)
+SET_GPIO(inen)
+SET_GPIO(polar)
+SET_GPIO(edge)
+SET_GPIO(both)
+
+
+#define SET_GPIO_SC(name) \
+void set_gpio_ ## name(unsigned short gpio, unsigned short arg) \
+{ \
+ BUG_ON(!(reserved_map[gpio_bank(gpio)] & gpio_bit(gpio))); \
+ if (arg) \
+ gpio_bankb[gpio_bank(gpio)]->name ## _set = gpio_bit(gpio); \
+ else \
+ gpio_bankb[gpio_bank(gpio)]->name ## _clear = gpio_bit(gpio); \
+} \
+EXPORT_SYMBOL(set_gpio_ ## name);
+
+SET_GPIO_SC(maska)
+SET_GPIO_SC(maskb)
+
+#if defined(ANOMALY_05000311)
+void set_gpio_data(unsigned short gpio, unsigned short arg)
+{
+ unsigned long flags;
+ BUG_ON(!(reserved_map[gpio_bank(gpio)] & gpio_bit(gpio)));
+ local_irq_save(flags);
+ if (arg)
+ gpio_bankb[gpio_bank(gpio)]->data_set = gpio_bit(gpio);
+ else
+ gpio_bankb[gpio_bank(gpio)]->data_clear = gpio_bit(gpio);
+ bfin_read_CHIPID();
+ local_irq_restore(flags);
+}
+EXPORT_SYMBOL(set_gpio_data);
+#else
+SET_GPIO_SC(data)
+#endif
+
+
+#if defined(ANOMALY_05000311)
+void set_gpio_toggle(unsigned short gpio)
+{
+ unsigned long flags;
+ BUG_ON(!(reserved_map[gpio_bank(gpio)] & gpio_bit(gpio)));
+ local_irq_save(flags);
+ gpio_bankb[gpio_bank(gpio)]->toggle = gpio_bit(gpio);
+ bfin_read_CHIPID();
+ local_irq_restore(flags);
+}
+#else
+void set_gpio_toggle(unsigned short gpio)
+{
+ BUG_ON(!(reserved_map[gpio_bank(gpio)] & gpio_bit(gpio)));
+ gpio_bankb[gpio_bank(gpio)]->toggle = gpio_bit(gpio);
+}
+#endif
+EXPORT_SYMBOL(set_gpio_toggle);
+
+
+/*Set current PORT date (16-bit word)*/
+
+#define SET_GPIO_P(name) \
+void set_gpiop_ ## name(unsigned short gpio, unsigned short arg) \
+{ \
+ gpio_bankb[gpio_bank(gpio)]->name = arg; \
+} \
+EXPORT_SYMBOL(set_gpiop_ ## name);
+
+SET_GPIO_P(dir)
+SET_GPIO_P(inen)
+SET_GPIO_P(polar)
+SET_GPIO_P(edge)
+SET_GPIO_P(both)
+SET_GPIO_P(maska)
+SET_GPIO_P(maskb)
+
+
+#if defined(ANOMALY_05000311)
+void set_gpiop_data(unsigned short gpio, unsigned short arg)
+{
+ unsigned long flags;
+ local_irq_save(flags);
+ gpio_bankb[gpio_bank(gpio)]->data = arg;
+ bfin_read_CHIPID();
+ local_irq_restore(flags);
+}
+EXPORT_SYMBOL(set_gpiop_data);
+#else
+SET_GPIO_P(data)
+#endif
+
+
+
+/* Get a specific bit */
+
+#define GET_GPIO(name) \
+unsigned short get_gpio_ ## name(unsigned short gpio) \
+{ \
+ return (0x01 & (gpio_bankb[gpio_bank(gpio)]->name >> gpio_sub_n(gpio))); \
+} \
+EXPORT_SYMBOL(get_gpio_ ## name);
+
+GET_GPIO(dir)
+GET_GPIO(inen)
+GET_GPIO(polar)
+GET_GPIO(edge)
+GET_GPIO(both)
+GET_GPIO(maska)
+GET_GPIO(maskb)
+
+
+#if defined(ANOMALY_05000311)
+unsigned short get_gpio_data(unsigned short gpio)
+{
+ unsigned long flags;
+ unsigned short ret;
+ BUG_ON(!(reserved_map[gpio_bank(gpio)] & gpio_bit(gpio)));
+ local_irq_save(flags);
+ ret = 0x01 & (gpio_bankb[gpio_bank(gpio)]->data >> gpio_sub_n(gpio));
+ bfin_read_CHIPID();
+ local_irq_restore(flags);
+ return ret;
+}
+EXPORT_SYMBOL(get_gpio_data);
+#else
+GET_GPIO(data)
+#endif
+
+/*Get current PORT date (16-bit word)*/
+
+#define GET_GPIO_P(name) \
+unsigned short get_gpiop_ ## name(unsigned short gpio) \
+{ \
+ return (gpio_bankb[gpio_bank(gpio)]->name);\
+} \
+EXPORT_SYMBOL(get_gpiop_ ## name);
+
+GET_GPIO_P(dir)
+GET_GPIO_P(inen)
+GET_GPIO_P(polar)
+GET_GPIO_P(edge)
+GET_GPIO_P(both)
+GET_GPIO_P(maska)
+GET_GPIO_P(maskb)
+
+#if defined(ANOMALY_05000311)
+unsigned short get_gpiop_data(unsigned short gpio)
+{
+ unsigned long flags;
+ unsigned short ret;
+ local_irq_save(flags);
+ ret = gpio_bankb[gpio_bank(gpio)]->data;
+ bfin_read_CHIPID();
+ local_irq_restore(flags);
+ return ret;
+}
+EXPORT_SYMBOL(get_gpiop_data);
+#else
+GET_GPIO_P(data)
+#endif
+
+#ifdef CONFIG_PM
+/***********************************************************
+*
+* FUNCTIONS: Blackfin PM Setup API
+*
+* INPUTS/OUTPUTS:
+* gpio - GPIO Number between 0 and MAX_BLACKFIN_GPIOS
+* type -
+* PM_WAKE_RISING
+* PM_WAKE_FALLING
+* PM_WAKE_HIGH
+* PM_WAKE_LOW
+* PM_WAKE_BOTH_EDGES
+*
+* DESCRIPTION: Blackfin PM Driver API
+*
+* CAUTION:
+*************************************************************
+* MODIFICATION HISTORY :
+**************************************************************/
+int gpio_pm_wakeup_request(unsigned short gpio, unsigned char type)
+{
+ unsigned long flags;
+
+ if ((check_gpio(gpio) < 0) || !type)
+ return -EINVAL;
+
+ local_irq_save(flags);
+
+ wakeup_map[gpio_bank(gpio)] |= gpio_bit(gpio);
+ wakeup_flags_map[gpio] = type;
+ local_irq_restore(flags);
+
+ return 0;
+}
+EXPORT_SYMBOL(gpio_pm_wakeup_request);
+
+void gpio_pm_wakeup_free(unsigned short gpio)
+{
+ unsigned long flags;
+
+ if (check_gpio(gpio) < 0)
+ return;
+
+ local_irq_save(flags);
+
+ wakeup_map[gpio_bank(gpio)] &= ~gpio_bit(gpio);
+
+ local_irq_restore(flags);
+}
+EXPORT_SYMBOL(gpio_pm_wakeup_free);
+
+static int bfin_gpio_wakeup_type(unsigned short gpio, unsigned char type)
+{
+ port_setup(gpio, GPIO_USAGE);
+ set_gpio_dir(gpio, 0);
+ set_gpio_inen(gpio, 1);
+
+ if (type & (PM_WAKE_RISING | PM_WAKE_FALLING))
+ set_gpio_edge(gpio, 1);
+ else
+ set_gpio_edge(gpio, 0);
+
+ if ((type & (PM_WAKE_BOTH_EDGES)) == (PM_WAKE_BOTH_EDGES))
+ set_gpio_both(gpio, 1);
+ else
+ set_gpio_both(gpio, 0);
+
+ if ((type & (PM_WAKE_FALLING | PM_WAKE_LOW)))
+ set_gpio_polar(gpio, 1);
+ else
+ set_gpio_polar(gpio, 0);
+
+ SSYNC();
+
+ return 0;
+}
+
+u32 gpio_pm_setup(void)
+{
+ u32 sic_iwr = 0;
+ u16 bank, mask, i, gpio;
+
+ for (i = 0; i < MAX_BLACKFIN_GPIOS; i+=GPIO_BANKSIZE) {
+ mask = wakeup_map[gpio_bank(i)];
+ bank = gpio_bank(i);
+
+ gpio_bank_saved[bank].maskb = gpio_bankb[bank]->maskb;
+ gpio_bankb[bank]->maskb = 0;
+
+ if (mask) {
+#ifdef BF537_FAMILY
+ gpio_bank_saved[bank].fer = *port_fer[bank];
+#endif
+ gpio_bank_saved[bank].inen = gpio_bankb[bank]->inen;
+ gpio_bank_saved[bank].polar = gpio_bankb[bank]->polar;
+ gpio_bank_saved[bank].dir = gpio_bankb[bank]->dir;
+ gpio_bank_saved[bank].edge = gpio_bankb[bank]->edge;
+ gpio_bank_saved[bank].both = gpio_bankb[bank]->both;
+
+ gpio = i;
+
+ while (mask) {
+ if (mask & 1) {
+ bfin_gpio_wakeup_type(gpio, wakeup_flags_map[gpio]);
+ set_gpio_data(gpio, 0); /*Clear*/
+ }
+ gpio++;
+ mask >>= 1;
+ }
+
+ sic_iwr |= 1 << (sic_iwr_irqs[bank] - (IRQ_CORETMR + 1));
+ gpio_bankb[bank]->maskb_set = wakeup_map[gpio_bank(i)];
+ }
+ }
+
+ if (sic_iwr)
+ return sic_iwr;
+ else
+ return IWR_ENABLE_ALL;
+}
+
+
+void gpio_pm_restore(void)
+{
+ u16 bank, mask, i;
+
+ for (i = 0; i < MAX_BLACKFIN_GPIOS; i+=GPIO_BANKSIZE) {
+ mask = wakeup_map[gpio_bank(i)];
+ bank = gpio_bank(i);
+
+ if (mask) {
+#ifdef BF537_FAMILY
+ *port_fer[bank] = gpio_bank_saved[bank].fer;
+#endif
+ gpio_bankb[bank]->inen = gpio_bank_saved[bank].inen;
+ gpio_bankb[bank]->dir = gpio_bank_saved[bank].dir;
+ gpio_bankb[bank]->polar = gpio_bank_saved[bank].polar;
+ gpio_bankb[bank]->edge = gpio_bank_saved[bank].edge;
+ gpio_bankb[bank]->both = gpio_bank_saved[bank].both;
+ }
+
+ gpio_bankb[bank]->maskb = gpio_bank_saved[bank].maskb;
+ }
+}
+
+#endif
+
+/***********************************************************
+*
+* FUNCTIONS: Blackfin GPIO Driver
+*
+* INPUTS/OUTPUTS:
+* gpio - GPIO Number between 0 and MAX_BLACKFIN_GPIOS
+*
+*
+* DESCRIPTION: Blackfin GPIO Driver API
+*
+* CAUTION:
+*************************************************************
+* MODIFICATION HISTORY :
+**************************************************************/
+
+int gpio_request(unsigned short gpio, const char *label)
+{
+ unsigned long flags;
+
+ if (check_gpio(gpio) < 0)
+ return -EINVAL;
+
+ local_irq_save(flags);
+
+ if (unlikely(reserved_map[gpio_bank(gpio)] & gpio_bit(gpio))) {
+ printk(KERN_ERR "bfin-gpio: GPIO %d is already reserved!\n", gpio);
+ dump_stack();
+ local_irq_restore(flags);
+ return -EBUSY;
+ }
+ reserved_map[gpio_bank(gpio)] |= gpio_bit(gpio);
+
+ local_irq_restore(flags);
+
+ port_setup(gpio, GPIO_USAGE);
+
+ return 0;
+}
+EXPORT_SYMBOL(gpio_request);
+
+
+void gpio_free(unsigned short gpio)
+{
+ unsigned long flags;
+
+ if (check_gpio(gpio) < 0)
+ return;
+
+ local_irq_save(flags);
+
+ if (unlikely(!(reserved_map[gpio_bank(gpio)] & gpio_bit(gpio)))) {
+ printk(KERN_ERR "bfin-gpio: GPIO %d wasn't reserved!\n", gpio);
+ dump_stack();
+ local_irq_restore(flags);
+ return;
+ }
+
+ default_gpio(gpio);
+
+ reserved_map[gpio_bank(gpio)] &= ~gpio_bit(gpio);
+
+ local_irq_restore(flags);
+}
+EXPORT_SYMBOL(gpio_free);
+
+
+void gpio_direction_input(unsigned short gpio)
+{
+ unsigned long flags;
+
+ BUG_ON(!(reserved_map[gpio_bank(gpio)] & gpio_bit(gpio)));
+
+ local_irq_save(flags);
+ gpio_bankb[gpio_bank(gpio)]->dir &= ~gpio_bit(gpio);
+ gpio_bankb[gpio_bank(gpio)]->inen |= gpio_bit(gpio);
+ local_irq_restore(flags);
+}
+EXPORT_SYMBOL(gpio_direction_input);
+
+void gpio_direction_output(unsigned short gpio)
+{
+ unsigned long flags;
+
+ BUG_ON(!(reserved_map[gpio_bank(gpio)] & gpio_bit(gpio)));
+
+ local_irq_save(flags);
+ gpio_bankb[gpio_bank(gpio)]->inen &= ~gpio_bit(gpio);
+ gpio_bankb[gpio_bank(gpio)]->dir |= gpio_bit(gpio);
+ local_irq_restore(flags);
+}
+EXPORT_SYMBOL(gpio_direction_output);
diff --git a/arch/blackfin/kernel/bfin_ksyms.c b/arch/blackfin/kernel/bfin_ksyms.c
new file mode 100644
index 0000000..f64ecb6
--- /dev/null
+++ b/arch/blackfin/kernel/bfin_ksyms.c
@@ -0,0 +1,119 @@
+/*
+ * File: arch/blackfin/kernel/bfin_ksyms.c
+ * Based on: none - original work
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/module.h>
+#include <asm/irq.h>
+#include <asm/checksum.h>
+#include <asm/cacheflush.h>
+#include <asm/uaccess.h>
+
+/* platform dependent support */
+
+EXPORT_SYMBOL(__ioremap);
+EXPORT_SYMBOL(strcmp);
+EXPORT_SYMBOL(strncmp);
+EXPORT_SYMBOL(dump_thread);
+
+EXPORT_SYMBOL(ip_fast_csum);
+
+EXPORT_SYMBOL(kernel_thread);
+
+EXPORT_SYMBOL(__up);
+EXPORT_SYMBOL(__down);
+EXPORT_SYMBOL(__down_trylock);
+EXPORT_SYMBOL(__down_interruptible);
+
+EXPORT_SYMBOL(is_in_rom);
+
+/* Networking helper routines. */
+EXPORT_SYMBOL(csum_partial_copy);
+
+/* The following are special because they're not called
+ * explicitly (the C compiler generates them). Fortunately,
+ * their interface isn't gonna change any time soon now, so
+ * it's OK to leave it out of version control.
+ */
+EXPORT_SYMBOL(memcpy);
+EXPORT_SYMBOL(memset);
+EXPORT_SYMBOL(memcmp);
+EXPORT_SYMBOL(memmove);
+EXPORT_SYMBOL(memchr);
+EXPORT_SYMBOL(get_wchan);
+
+/*
+ * libgcc functions - functions that are used internally by the
+ * compiler... (prototypes are not correct though, but that
+ * doesn't really matter since they're not versioned).
+ */
+extern void __ashldi3(void);
+extern void __ashrdi3(void);
+extern void __smulsi3_highpart(void);
+extern void __umulsi3_highpart(void);
+extern void __divsi3(void);
+extern void __lshrdi3(void);
+extern void __modsi3(void);
+extern void __muldi3(void);
+extern void __udivsi3(void);
+extern void __umodsi3(void);
+
+/* gcc lib functions */
+EXPORT_SYMBOL(__ashldi3);
+EXPORT_SYMBOL(__ashrdi3);
+EXPORT_SYMBOL(__umulsi3_highpart);
+EXPORT_SYMBOL(__smulsi3_highpart);
+EXPORT_SYMBOL(__divsi3);
+EXPORT_SYMBOL(__lshrdi3);
+EXPORT_SYMBOL(__modsi3);
+EXPORT_SYMBOL(__muldi3);
+EXPORT_SYMBOL(__udivsi3);
+EXPORT_SYMBOL(__umodsi3);
+
+EXPORT_SYMBOL(outsb);
+EXPORT_SYMBOL(insb);
+EXPORT_SYMBOL(outsw);
+EXPORT_SYMBOL(insw);
+EXPORT_SYMBOL(outsl);
+EXPORT_SYMBOL(insl);
+EXPORT_SYMBOL(irq_flags);
+EXPORT_SYMBOL(iounmap);
+EXPORT_SYMBOL(blackfin_dcache_invalidate_range);
+EXPORT_SYMBOL(blackfin_icache_dcache_flush_range);
+EXPORT_SYMBOL(blackfin_icache_flush_range);
+EXPORT_SYMBOL(blackfin_dcache_flush_range);
+EXPORT_SYMBOL(blackfin_dflush_page);
+
+EXPORT_SYMBOL(csum_partial);
+EXPORT_SYMBOL(__init_begin);
+EXPORT_SYMBOL(__init_end);
+EXPORT_SYMBOL(_ebss_l1);
+EXPORT_SYMBOL(_stext_l1);
+EXPORT_SYMBOL(_etext_l1);
+EXPORT_SYMBOL(_sdata_l1);
+EXPORT_SYMBOL(_ebss_b_l1);
+EXPORT_SYMBOL(_sdata_b_l1);
diff --git a/arch/blackfin/kernel/dma-mapping.c b/arch/blackfin/kernel/dma-mapping.c
new file mode 100644
index 0000000..539eb24
--- /dev/null
+++ b/arch/blackfin/kernel/dma-mapping.c
@@ -0,0 +1,183 @@
+/*
+ * File: arch/blackfin/kernel/dma-mapping.c
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description: Dynamic DMA mapping support.
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/string.h>
+#include <linux/bootmem.h>
+#include <linux/spinlock.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <asm/cacheflush.h>
+#include <asm/io.h>
+#include <asm/bfin-global.h>
+
+static spinlock_t dma_page_lock;
+static unsigned int *dma_page;
+static unsigned int dma_pages;
+static unsigned long dma_base;
+static unsigned long dma_size;
+static unsigned int dma_initialized;
+
+void dma_alloc_init(unsigned long start, unsigned long end)
+{
+ spin_lock_init(&dma_page_lock);
+ dma_initialized = 0;
+
+ dma_page = (unsigned int *)__get_free_page(GFP_KERNEL);
+ memset(dma_page, 0, PAGE_SIZE);
+ dma_base = PAGE_ALIGN(start);
+ dma_size = PAGE_ALIGN(end) - PAGE_ALIGN(start);
+ dma_pages = dma_size >> PAGE_SHIFT;
+ memset((void *)dma_base, 0, DMA_UNCACHED_REGION);
+ dma_initialized = 1;
+
+ printk(KERN_INFO "%s: dma_page @ 0x%p - %d pages at 0x%08lx\n", __FUNCTION__,
+ dma_page, dma_pages, dma_base);
+}
+
+static inline unsigned int get_pages(size_t size)
+{
+ return ((size - 1) >> PAGE_SHIFT) + 1;
+}
+
+static unsigned long __alloc_dma_pages(unsigned int pages)
+{
+ unsigned long ret = 0, flags;
+ int i, count = 0;
+
+ if (dma_initialized == 0)
+ dma_alloc_init(_ramend - DMA_UNCACHED_REGION, _ramend);
+
+ spin_lock_irqsave(&dma_page_lock, flags);
+
+ for (i = 0; i < dma_pages;) {
+ if (dma_page[i++] == 0) {
+ if (++count == pages) {
+ while (count--)
+ dma_page[--i] = 1;
+ ret = dma_base + (i << PAGE_SHIFT);
+ break;
+ }
+ } else
+ count = 0;
+ }
+ spin_unlock_irqrestore(&dma_page_lock, flags);
+ return ret;
+}
+
+static void __free_dma_pages(unsigned long addr, unsigned int pages)
+{
+ unsigned long page = (addr - dma_base) >> PAGE_SHIFT;
+ unsigned long flags;
+ int i;
+
+ if ((page + pages) > dma_pages) {
+ printk(KERN_ERR "%s: freeing outside range.\n", __FUNCTION__);
+ BUG();
+ }
+
+ spin_lock_irqsave(&dma_page_lock, flags);
+ for (i = page; i < page + pages; i++) {
+ dma_page[i] = 0;
+ }
+ spin_unlock_irqrestore(&dma_page_lock, flags);
+}
+
+void *dma_alloc_coherent(struct device *dev, size_t size,
+ dma_addr_t * dma_handle, gfp_t gfp)
+{
+ void *ret;
+
+ ret = (void *)__alloc_dma_pages(get_pages(size));
+
+ if (ret) {
+ memset(ret, 0, size);
+ *dma_handle = virt_to_phys(ret);
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL(dma_alloc_coherent);
+
+void
+dma_free_coherent(struct device *dev, size_t size, void *vaddr,
+ dma_addr_t dma_handle)
+{
+ __free_dma_pages((unsigned long)vaddr, get_pages(size));
+}
+EXPORT_SYMBOL(dma_free_coherent);
+
+/*
+ * Dummy functions defined for some existing drivers
+ */
+
+dma_addr_t
+dma_map_single(struct device *dev, void *ptr, size_t size,
+ enum dma_data_direction direction)
+{
+ BUG_ON(direction == DMA_NONE);
+
+ invalidate_dcache_range((unsigned long)ptr,
+ (unsigned long)ptr + size);
+
+ return (dma_addr_t) ptr;
+}
+EXPORT_SYMBOL(dma_map_single);
+
+int
+dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
+ enum dma_data_direction direction)
+{
+ int i;
+
+ BUG_ON(direction == DMA_NONE);
+
+ for (i = 0; i < nents; i++)
+ invalidate_dcache_range(sg_dma_address(&sg[i]),
+ sg_dma_address(&sg[i]) +
+ sg_dma_len(&sg[i]));
+
+ return nents;
+}
+EXPORT_SYMBOL(dma_map_sg);
+
+void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
+ enum dma_data_direction direction)
+{
+ BUG_ON(direction == DMA_NONE);
+}
+EXPORT_SYMBOL(dma_unmap_single);
+
+void dma_unmap_sg(struct device *dev, struct scatterlist *sg,
+ int nhwentries, enum dma_data_direction direction)
+{
+ BUG_ON(direction == DMA_NONE);
+}
+EXPORT_SYMBOL(dma_unmap_sg);
diff --git a/arch/blackfin/kernel/dualcore_test.c b/arch/blackfin/kernel/dualcore_test.c
new file mode 100644
index 0000000..8b89c99
--- /dev/null
+++ b/arch/blackfin/kernel/dualcore_test.c
@@ -0,0 +1,49 @@
+/*
+ * File: arch/blackfin/kernel/dualcore_test.c
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description: Small test code for CoreB on a BF561
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+
+static int *testarg = (int*)0xfeb00000;
+
+static int test_init(void)
+{
+ *testarg = 1;
+ printk("Dual core test module inserted: set testarg = [%d]\n @ [%p]\n",
+ *testarg, testarg);
+ return 0;
+}
+
+static void test_exit(void)
+{
+ printk("Dual core test module removed: testarg = [%d]\n", *testarg);
+}
+
+module_init(test_init);
+module_exit(test_exit);
diff --git a/arch/blackfin/kernel/entry.S b/arch/blackfin/kernel/entry.S
new file mode 100644
index 0000000..5880b27
--- /dev/null
+++ b/arch/blackfin/kernel/entry.S
@@ -0,0 +1,94 @@
+/*
+ * File: arch/blackfin/kernel/entry.S
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/linkage.h>
+#include <asm/thread_info.h>
+#include <asm/errno.h>
+#include <asm/asm-offsets.h>
+
+#include <asm/mach-common/context.S>
+
+#ifdef CONFIG_EXCPT_IRQ_SYSC_L1
+.section .l1.text
+#else
+.text
+#endif
+
+ENTRY(_ret_from_fork)
+ SP += -12;
+ call _schedule_tail;
+ SP += 12;
+ r0 = [sp + PT_IPEND];
+ cc = bittst(r0,1);
+ if cc jump .Lin_kernel;
+ RESTORE_CONTEXT
+ rti;
+.Lin_kernel:
+ bitclr(r0,1);
+ [sp + PT_IPEND] = r0;
+ /* do a 'fake' RTI by jumping to [RETI]
+ * to avoid clearing supervisor mode in child
+ */
+ RESTORE_ALL_SYS
+ p0 = reti;
+ jump (p0);
+
+ENTRY(_sys_fork)
+ r0 = -EINVAL;
+ rts;
+
+ENTRY(_sys_vfork)
+ r0 = sp;
+ r0 += 24;
+ [--sp] = rets;
+ SP += -12;
+ call _bfin_vfork;
+ SP += 12;
+ rets = [sp++];
+ rts;
+
+ENTRY(_sys_clone)
+ r0 = sp;
+ r0 += 24;
+ [--sp] = rets;
+ SP += -12;
+ call _bfin_clone;
+ SP += 12;
+ rets = [sp++];
+ rts;
+
+ENTRY(_sys_rt_sigreturn)
+ r0 = sp;
+ r0 += 24;
+ [--sp] = rets;
+ SP += -12;
+ call _do_rt_sigreturn;
+ SP += 12;
+ rets = [sp++];
+ rts;
diff --git a/arch/blackfin/kernel/flat.c b/arch/blackfin/kernel/flat.c
new file mode 100644
index 0000000..a92587b
--- /dev/null
+++ b/arch/blackfin/kernel/flat.c
@@ -0,0 +1,101 @@
+/*
+ * arch/blackfin/kernel/flat.c
+ *
+ * Copyright (C) 2007 Analog Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/flat.h>
+
+#define FLAT_BFIN_RELOC_TYPE_16_BIT 0
+#define FLAT_BFIN_RELOC_TYPE_16H_BIT 1
+#define FLAT_BFIN_RELOC_TYPE_32_BIT 2
+
+unsigned long bfin_get_addr_from_rp(unsigned long *ptr,
+ unsigned long relval,
+ unsigned long flags,
+ unsigned long *persistent)
+{
+ unsigned short *usptr = (unsigned short *)ptr;
+ int type = (relval >> 26) & 7;
+ unsigned long val;
+
+ switch (type) {
+ case FLAT_BFIN_RELOC_TYPE_16_BIT:
+ case FLAT_BFIN_RELOC_TYPE_16H_BIT:
+ usptr = (unsigned short *)ptr;
+ pr_debug("*usptr = %x", get_unaligned(usptr));
+ val = get_unaligned(usptr);
+ val += *persistent;
+ break;
+
+ case FLAT_BFIN_RELOC_TYPE_32_BIT:
+ pr_debug("*ptr = %lx", get_unaligned(ptr));
+ val = get_unaligned(ptr);
+ break;
+
+ default:
+ pr_debug("BINFMT_FLAT: Unknown relocation type %x\n",
+ type);
+
+ return 0;
+ }
+
+ /*
+ * Stack-relative relocs contain the offset into the stack, we
+ * have to add the stack's start address here and return 1 from
+ * flat_addr_absolute to prevent the normal address calculations
+ */
+ if (relval & (1 << 29))
+ return val + current->mm->context.end_brk;
+
+ if ((flags & FLAT_FLAG_GOTPIC) == 0)
+ val = htonl(val);
+ return val;
+}
+EXPORT_SYMBOL(bfin_get_addr_from_rp);
+
+/*
+ * Insert the address ADDR into the symbol reference at RP;
+ * RELVAL is the raw relocation-table entry from which RP is derived
+ */
+void bfin_put_addr_at_rp(unsigned long *ptr, unsigned long addr,
+ unsigned long relval)
+{
+ unsigned short *usptr = (unsigned short *)ptr;
+ int type = (relval >> 26) & 7;
+
+ switch (type) {
+ case FLAT_BFIN_RELOC_TYPE_16_BIT:
+ put_unaligned(addr, usptr);
+ pr_debug("new value %x at %p", get_unaligned(usptr),
+ usptr);
+ break;
+
+ case FLAT_BFIN_RELOC_TYPE_16H_BIT:
+ put_unaligned(addr >> 16, usptr);
+ pr_debug("new value %x", get_unaligned(usptr));
+ break;
+
+ case FLAT_BFIN_RELOC_TYPE_32_BIT:
+ put_unaligned(addr, ptr);
+ pr_debug("new ptr =%lx", get_unaligned(ptr));
+ break;
+ }
+}
+EXPORT_SYMBOL(bfin_put_addr_at_rp);
diff --git a/arch/blackfin/kernel/init_task.c b/arch/blackfin/kernel/init_task.c
new file mode 100644
index 0000000..b45188f
--- /dev/null
+++ b/arch/blackfin/kernel/init_task.c
@@ -0,0 +1,60 @@
+/*
+ * File: arch/blackfin/kernel/init_task.c
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description: This file contains the simple DMA Implementation for Blackfin
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/init_task.h>
+#include <linux/mqueue.h>
+
+static struct fs_struct init_fs = INIT_FS;
+static struct files_struct init_files = INIT_FILES;
+static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
+static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
+
+struct mm_struct init_mm = INIT_MM(init_mm);
+EXPORT_SYMBOL(init_mm);
+
+/*
+ * Initial task structure.
+ *
+ * All other task structs will be allocated on slabs in fork.c
+ */
+struct task_struct init_task = INIT_TASK(init_task);
+EXPORT_SYMBOL(init_task);
+
+/*
+ * Initial thread structure.
+ *
+ * We need to make sure that this is 8192-byte aligned due to the
+ * way process stacks are handled. This is done by having a special
+ * "init_task" linker map entry.
+ */
+union thread_union init_thread_union
+ __attribute__ ((__section__(".data.init_task"))) = {
+INIT_THREAD_INFO(init_task)};
diff --git a/arch/blackfin/kernel/irqchip.c b/arch/blackfin/kernel/irqchip.c
new file mode 100644
index 0000000..df5bf02
--- /dev/null
+++ b/arch/blackfin/kernel/irqchip.c
@@ -0,0 +1,147 @@
+/*
+ * File: arch/blackfin/kernel/irqchip.c
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description: This file contains the simple DMA Implementation for Blackfin
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/kernel_stat.h>
+#include <linux/module.h>
+#include <linux/random.h>
+#include <linux/seq_file.h>
+#include <linux/kallsyms.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+
+static unsigned long irq_err_count;
+static spinlock_t irq_controller_lock;
+
+/*
+ * Dummy mask/unmask handler
+ */
+void dummy_mask_unmask_irq(unsigned int irq)
+{
+}
+
+void ack_bad_irq(unsigned int irq)
+{
+ irq_err_count += 1;
+ printk(KERN_ERR "IRQ: spurious interrupt %d\n", irq);
+}
+EXPORT_SYMBOL(ack_bad_irq);
+
+static struct irq_chip bad_chip = {
+ .ack = dummy_mask_unmask_irq,
+ .mask = dummy_mask_unmask_irq,
+ .unmask = dummy_mask_unmask_irq,
+};
+
+static struct irq_desc bad_irq_desc = {
+ .chip = &bad_chip,
+ .handle_irq = handle_bad_irq,
+ .depth = 1,
+};
+
+int show_interrupts(struct seq_file *p, void *v)
+{
+ int i = *(loff_t *) v;
+ struct irqaction *action;
+ unsigned long flags;
+
+ if (i < NR_IRQS) {
+ spin_lock_irqsave(&irq_desc[i].lock, flags);
+ action = irq_desc[i].action;
+ if (!action)
+ goto unlock;
+
+ seq_printf(p, "%3d: %10u ", i, kstat_irqs(i));
+ seq_printf(p, " %s", action->name);
+ for (action = action->next; action; action = action->next)
+ seq_printf(p, ", %s", action->name);
+
+ seq_putc(p, '\n');
+ unlock:
+ spin_unlock_irqrestore(&irq_desc[i].lock, flags);
+ } else if (i == NR_IRQS) {
+ seq_printf(p, "Err: %10lu\n", irq_err_count);
+ }
+ return 0;
+}
+
+/*
+ * do_IRQ handles all hardware IRQ's. Decoded IRQs should not
+ * come via this function. Instead, they should provide their
+ * own 'handler'
+ */
+
+#ifdef CONFIG_DO_IRQ_L1
+asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs)__attribute__((l1_text));
+#endif
+
+asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs)
+{
+ struct pt_regs *old_regs;
+ struct irq_desc *desc = irq_desc + irq;
+ unsigned short pending, other_ints;
+
+ old_regs = set_irq_regs(regs);
+
+ /*
+ * Some hardware gives randomly wrong interrupts. Rather
+ * than crashing, do something sensible.
+ */
+ if (irq >= NR_IRQS)
+ desc = &bad_irq_desc;
+
+ irq_enter();
+
+ generic_handle_irq(irq);
+
+ /* If we're the only interrupt running (ignoring IRQ15 which is for
+ syscalls), lower our priority to IRQ14 so that softirqs run at
+ that level. If there's another, lower-level interrupt, irq_exit
+ will defer softirqs to that. */
+ CSYNC();
+ pending = bfin_read_IPEND() & ~0x8000;
+ other_ints = pending & (pending - 1);
+ if (other_ints == 0)
+ lower_to_irq14();
+ irq_exit();
+
+ set_irq_regs(old_regs);
+}
+
+void __init init_IRQ(void)
+{
+ struct irq_desc *desc;
+ int irq;
+
+ spin_lock_init(&irq_controller_lock);
+ for (irq = 0, desc = irq_desc; irq < NR_IRQS; irq++, desc++) {
+ *desc = bad_irq_desc;
+ }
+
+ init_arch_irq();
+}
diff --git a/arch/blackfin/kernel/module.c b/arch/blackfin/kernel/module.c
new file mode 100644
index 0000000..372f756
--- /dev/null
+++ b/arch/blackfin/kernel/module.c
@@ -0,0 +1,429 @@
+/*
+ * File: arch/blackfin/kernel/module.c
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+
+#include <linux/moduleloader.h>
+#include <linux/elf.h>
+#include <linux/vmalloc.h>
+#include <linux/fs.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <asm/dma.h>
+#include <asm/cacheflush.h>
+
+/*
+ * handle arithmetic relocations.
+ * See binutils/bfd/elf32-bfin.c for more details
+ */
+#define RELOC_STACK_SIZE 100
+static uint32_t reloc_stack[RELOC_STACK_SIZE];
+static unsigned int reloc_stack_tos;
+
+#define is_reloc_stack_empty() ((reloc_stack_tos > 0)?0:1)
+
+static void reloc_stack_push(uint32_t value)
+{
+ reloc_stack[reloc_stack_tos++] = value;
+}
+
+static uint32_t reloc_stack_pop(void)
+{
+ return reloc_stack[--reloc_stack_tos];
+}
+
+static uint32_t reloc_stack_operate(unsigned int oper, struct module *mod)
+{
+ uint32_t value;
+
+ switch (oper) {
+ case R_add:
+ value = reloc_stack[reloc_stack_tos - 2] +
+ reloc_stack[reloc_stack_tos - 1];
+ reloc_stack_tos -= 2;
+ break;
+ case R_sub:
+ value = reloc_stack[reloc_stack_tos - 2] -
+ reloc_stack[reloc_stack_tos - 1];
+ reloc_stack_tos -= 2;
+ break;
+ case R_mult:
+ value = reloc_stack[reloc_stack_tos - 2] *
+ reloc_stack[reloc_stack_tos - 1];
+ reloc_stack_tos -= 2;
+ break;
+ case R_div:
+ value = reloc_stack[reloc_stack_tos - 2] /
+ reloc_stack[reloc_stack_tos - 1];
+ reloc_stack_tos -= 2;
+ break;
+ case R_mod:
+ value = reloc_stack[reloc_stack_tos - 2] %
+ reloc_stack[reloc_stack_tos - 1];
+ reloc_stack_tos -= 2;
+ break;
+ case R_lshift:
+ value = reloc_stack[reloc_stack_tos - 2] <<
+ reloc_stack[reloc_stack_tos - 1];
+ reloc_stack_tos -= 2;
+ break;
+ case R_rshift:
+ value = reloc_stack[reloc_stack_tos - 2] >>
+ reloc_stack[reloc_stack_tos - 1];
+ reloc_stack_tos -= 2;
+ break;
+ case R_and:
+ value = reloc_stack[reloc_stack_tos - 2] &
+ reloc_stack[reloc_stack_tos - 1];
+ reloc_stack_tos -= 2;
+ break;
+ case R_or:
+ value = reloc_stack[reloc_stack_tos - 2] |
+ reloc_stack[reloc_stack_tos - 1];
+ reloc_stack_tos -= 2;
+ break;
+ case R_xor:
+ value = reloc_stack[reloc_stack_tos - 2] ^
+ reloc_stack[reloc_stack_tos - 1];
+ reloc_stack_tos -= 2;
+ break;
+ case R_land:
+ value = reloc_stack[reloc_stack_tos - 2] &&
+ reloc_stack[reloc_stack_tos - 1];
+ reloc_stack_tos -= 2;
+ break;
+ case R_lor:
+ value = reloc_stack[reloc_stack_tos - 2] ||
+ reloc_stack[reloc_stack_tos - 1];
+ reloc_stack_tos -= 2;
+ break;
+ case R_neg:
+ value = -reloc_stack[reloc_stack_tos - 1];
+ reloc_stack_tos--;
+ break;
+ case R_comp:
+ value = ~reloc_stack[reloc_stack_tos - 1];
+ reloc_stack_tos -= 1;
+ break;
+ default:
+ printk(KERN_WARNING "module %s: unhandled reloction\n",
+ mod->name);
+ return 0;
+ }
+
+ /* now push the new value back on stack */
+ reloc_stack_push(value);
+
+ return value;
+}
+
+void *module_alloc(unsigned long size)
+{
+ if (size == 0)
+ return NULL;
+ return vmalloc(size);
+}
+
+/* Free memory returned from module_alloc */
+void module_free(struct module *mod, void *module_region)
+{
+ vfree(module_region);
+}
+
+/* Transfer the section to the L1 memory */
+int
+module_frob_arch_sections(Elf_Ehdr * hdr, Elf_Shdr * sechdrs,
+ char *secstrings, struct module *mod)
+{
+ Elf_Shdr *s, *sechdrs_end = sechdrs + hdr->e_shnum;
+ void *dest = NULL;
+
+ for (s = sechdrs; s < sechdrs_end; ++s) {
+ if ((strcmp(".l1.text", secstrings + s->sh_name) == 0) ||
+ ((strcmp(".text", secstrings + s->sh_name)==0) &&
+ (hdr->e_flags & FLG_CODE_IN_L1) && (s->sh_size > 0))) {
+ mod->arch.text_l1 = s;
+ dest = l1_inst_sram_alloc(s->sh_size);
+ if (dest == NULL) {
+ printk(KERN_ERR
+ "module %s: L1 instruction memory allocation failed\n",
+ mod->name);
+ return -1;
+ }
+ dma_memcpy(dest, (void *)s->sh_addr, s->sh_size);
+ s->sh_flags &= ~SHF_ALLOC;
+ s->sh_addr = (unsigned long)dest;
+ }
+ if ((strcmp(".l1.data", secstrings + s->sh_name) == 0)||
+ ((strcmp(".data", secstrings + s->sh_name)==0) &&
+ (hdr->e_flags & FLG_DATA_IN_L1) && (s->sh_size > 0))) {
+ mod->arch.data_a_l1 = s;
+ dest = l1_data_sram_alloc(s->sh_size);
+ if (dest == NULL) {
+ printk(KERN_ERR
+ "module %s: L1 data memory allocation failed\n",
+ mod->name);
+ return -1;
+ }
+ memcpy(dest, (void *)s->sh_addr, s->sh_size);
+ s->sh_flags &= ~SHF_ALLOC;
+ s->sh_addr = (unsigned long)dest;
+ }
+ if (strcmp(".l1.bss", secstrings + s->sh_name) == 0 ||
+ ((strcmp(".bss", secstrings + s->sh_name)==0) &&
+ (hdr->e_flags & FLG_DATA_IN_L1) && (s->sh_size > 0))) {
+ mod->arch.bss_a_l1 = s;
+ dest = l1_data_sram_alloc(s->sh_size);
+ if (dest == NULL) {
+ printk(KERN_ERR
+ "module %s: L1 data memory allocation failed\n",
+ mod->name);
+ return -1;
+ }
+ memset(dest, 0, s->sh_size);
+ s->sh_flags &= ~SHF_ALLOC;
+ s->sh_addr = (unsigned long)dest;
+ }
+ if (strcmp(".l1.data.B", secstrings + s->sh_name) == 0) {
+ mod->arch.data_b_l1 = s;
+ dest = l1_data_B_sram_alloc(s->sh_size);
+ if (dest == NULL) {
+ printk(KERN_ERR
+ "module %s: L1 data memory allocation failed\n",
+ mod->name);
+ return -1;
+ }
+ memcpy(dest, (void *)s->sh_addr, s->sh_size);
+ s->sh_flags &= ~SHF_ALLOC;
+ s->sh_addr = (unsigned long)dest;
+ }
+ if (strcmp(".l1.bss.B", secstrings + s->sh_name) == 0) {
+ mod->arch.bss_b_l1 = s;
+ dest = l1_data_B_sram_alloc(s->sh_size);
+ if (dest == NULL) {
+ printk(KERN_ERR
+ "module %s: L1 data memory allocation failed\n",
+ mod->name);
+ return -1;
+ }
+ memset(dest, 0, s->sh_size);
+ s->sh_flags &= ~SHF_ALLOC;
+ s->sh_addr = (unsigned long)dest;
+ }
+ }
+ return 0;
+}
+
+int
+apply_relocate(Elf_Shdr * sechdrs, const char *strtab,
+ unsigned int symindex, unsigned int relsec, struct module *me)
+{
+ printk(KERN_ERR "module %s: .rel unsupported\n", me->name);
+ return -ENOEXEC;
+}
+
+/*************************************************************************/
+/* FUNCTION : apply_relocate_add */
+/* ABSTRACT : Blackfin specific relocation handling for the loadable */
+/* modules. Modules are expected to be .o files. */
+/* Arithmetic relocations are handled. */
+/* We do not expect LSETUP to be split and hence is not */
+/* handled. */
+/* R_byte and R_byte2 are also not handled as the gas */
+/* does not generate it. */
+/*************************************************************************/
+int
+apply_relocate_add(Elf_Shdr * sechdrs, const char *strtab,
+ unsigned int symindex, unsigned int relsec,
+ struct module *mod)
+{
+ unsigned int i;
+ unsigned short tmp;
+ Elf32_Rela *rel = (void *)sechdrs[relsec].sh_addr;
+ Elf32_Sym *sym;
+ uint32_t *location32;
+ uint16_t *location16;
+ uint32_t value;
+
+ pr_debug("Applying relocate section %u to %u\n", relsec,
+ sechdrs[relsec].sh_info);
+ for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) {
+ /* This is where to make the change */
+ location16 =
+ (uint16_t *) (sechdrs[sechdrs[relsec].sh_info].sh_addr +
+ rel[i].r_offset);
+ location32 = (uint32_t *) location16;
+ /* This is the symbol it is referring to. Note that all
+ undefined symbols have been resolved. */
+ sym = (Elf32_Sym *) sechdrs[symindex].sh_addr
+ + ELF32_R_SYM(rel[i].r_info);
+ if (is_reloc_stack_empty()) {
+ value = sym->st_value;
+ } else {
+ value = reloc_stack_pop();
+ }
+ value += rel[i].r_addend;
+ pr_debug("location is %x, value is %x type is %d \n",
+ (unsigned int) location32, value,
+ ELF32_R_TYPE(rel[i].r_info));
+
+ switch (ELF32_R_TYPE(rel[i].r_info)) {
+
+ case R_pcrel24:
+ case R_pcrel24_jump_l:
+ /* Add the value, subtract its postition */
+ location16 =
+ (uint16_t *) (sechdrs[sechdrs[relsec].sh_info].
+ sh_addr + rel[i].r_offset - 2);
+ location32 = (uint32_t *) location16;
+ value -= (uint32_t) location32;
+ value >>= 1;
+ pr_debug("value is %x, before %x-%x after %x-%x\n", value,
+ *location16, *(location16 + 1),
+ (*location16 & 0xff00) | (value >> 16 & 0x00ff),
+ value & 0xffff);
+ *location16 =
+ (*location16 & 0xff00) | (value >> 16 & 0x00ff);
+ *(location16 + 1) = value & 0xffff;
+ break;
+ case R_pcrel12_jump:
+ case R_pcrel12_jump_s:
+ value -= (uint32_t) location32;
+ value >>= 1;
+ *location16 = (value & 0xfff);
+ break;
+ case R_pcrel10:
+ value -= (uint32_t) location32;
+ value >>= 1;
+ *location16 = (value & 0x3ff);
+ break;
+ case R_luimm16:
+ pr_debug("before %x after %x\n", *location16,
+ (value & 0xffff));
+ tmp = (value & 0xffff);
+ if((unsigned long)location16 >= L1_CODE_START) {
+ dma_memcpy(location16, &tmp, 2);
+ } else
+ *location16 = tmp;
+ break;
+ case R_huimm16:
+ pr_debug("before %x after %x\n", *location16,
+ ((value >> 16) & 0xffff));
+ tmp = ((value >> 16) & 0xffff);
+ if((unsigned long)location16 >= L1_CODE_START) {
+ dma_memcpy(location16, &tmp, 2);
+ } else
+ *location16 = tmp;
+ break;
+ case R_rimm16:
+ *location16 = (value & 0xffff);
+ break;
+ case R_byte4_data:
+ pr_debug("before %x after %x\n", *location32, value);
+ *location32 = value;
+ break;
+ case R_push:
+ reloc_stack_push(value);
+ break;
+ case R_const:
+ reloc_stack_push(rel[i].r_addend);
+ break;
+ case R_add:
+ case R_sub:
+ case R_mult:
+ case R_div:
+ case R_mod:
+ case R_lshift:
+ case R_rshift:
+ case R_and:
+ case R_or:
+ case R_xor:
+ case R_land:
+ case R_lor:
+ case R_neg:
+ case R_comp:
+ reloc_stack_operate(ELF32_R_TYPE(rel[i].r_info), mod);
+ break;
+ default:
+ printk(KERN_ERR "module %s: Unknown relocation: %u\n",
+ mod->name, ELF32_R_TYPE(rel[i].r_info));
+ return -ENOEXEC;
+ }
+ }
+ return 0;
+}
+
+int
+module_finalize(const Elf_Ehdr * hdr,
+ const Elf_Shdr * sechdrs, struct module *mod)
+{
+ unsigned int i, strindex = 0, symindex = 0;
+ char *secstrings;
+
+ secstrings = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset;
+
+ for (i = 1; i < hdr->e_shnum; i++) {
+ /* Internal symbols and strings. */
+ if (sechdrs[i].sh_type == SHT_SYMTAB) {
+ symindex = i;
+ strindex = sechdrs[i].sh_link;
+ }
+ }
+
+ for (i = 1; i < hdr->e_shnum; i++) {
+ const char *strtab = (char *)sechdrs[strindex].sh_addr;
+ unsigned int info = sechdrs[i].sh_info;
+
+ /* Not a valid relocation section? */
+ if (info >= hdr->e_shnum)
+ continue;
+
+ if ((sechdrs[i].sh_type == SHT_RELA) &&
+ ((strcmp(".rela.l1.text", secstrings + sechdrs[i].sh_name) == 0)||
+ ((strcmp(".rela.text", secstrings + sechdrs[i].sh_name) == 0) &&
+ (hdr->e_flags & FLG_CODE_IN_L1)))) {
+ apply_relocate_add((Elf_Shdr *) sechdrs, strtab,
+ symindex, i, mod);
+ }
+ }
+ return 0;
+}
+
+void module_arch_cleanup(struct module *mod)
+{
+ if ((mod->arch.text_l1) && (mod->arch.text_l1->sh_addr))
+ l1_inst_sram_free((void*)mod->arch.text_l1->sh_addr);
+ if ((mod->arch.data_a_l1) && (mod->arch.data_a_l1->sh_addr))
+ l1_data_sram_free((void*)mod->arch.data_a_l1->sh_addr);
+ if ((mod->arch.bss_a_l1) && (mod->arch.bss_a_l1->sh_addr))
+ l1_data_sram_free((void*)mod->arch.bss_a_l1->sh_addr);
+ if ((mod->arch.data_b_l1) && (mod->arch.data_b_l1->sh_addr))
+ l1_data_B_sram_free((void*)mod->arch.data_b_l1->sh_addr);
+ if ((mod->arch.bss_b_l1) && (mod->arch.bss_b_l1->sh_addr))
+ l1_data_B_sram_free((void*)mod->arch.bss_b_l1->sh_addr);
+}
diff --git a/arch/blackfin/kernel/process.c b/arch/blackfin/kernel/process.c
new file mode 100644
index 0000000..3eff743
--- /dev/null
+++ b/arch/blackfin/kernel/process.c
@@ -0,0 +1,394 @@
+/*
+ * File: arch/blackfin/kernel/process.c
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description: Blackfin architecture-dependent process handling.
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/module.h>
+#include <linux/smp_lock.h>
+#include <linux/unistd.h>
+#include <linux/user.h>
+#include <linux/a.out.h>
+
+#include <asm/blackfin.h>
+#include <asm/uaccess.h>
+
+#define LED_ON 0
+#define LED_OFF 1
+
+asmlinkage void ret_from_fork(void);
+
+/* Points to the SDRAM backup memory for the stack that is currently in
+ * L1 scratchpad memory.
+ */
+void *current_l1_stack_save;
+
+/* The number of tasks currently using a L1 stack area. The SRAM is
+ * allocated/deallocated whenever this changes from/to zero.
+ */
+int nr_l1stack_tasks;
+
+/* Start and length of the area in L1 scratchpad memory which we've allocated
+ * for process stacks.
+ */
+void *l1_stack_base;
+unsigned long l1_stack_len;
+
+/*
+ * Powermanagement idle function, if any..
+ */
+void (*pm_idle)(void) = NULL;
+EXPORT_SYMBOL(pm_idle);
+
+void (*pm_power_off)(void) = NULL;
+EXPORT_SYMBOL(pm_power_off);
+
+/*
+ * We are using a different LED from the one used to indicate timer interrupt.
+ */
+#if defined(CONFIG_BFIN_IDLE_LED)
+static inline void leds_switch(int flag)
+{
+ unsigned short tmp = 0;
+
+ tmp = bfin_read_CONFIG_BFIN_IDLE_LED_PORT();
+ SSYNC();
+
+ if (flag == LED_ON)
+ tmp &= ~CONFIG_BFIN_IDLE_LED_PIN; /* light on */
+ else
+ tmp |= CONFIG_BFIN_IDLE_LED_PIN; /* light off */
+
+ bfin_write_CONFIG_BFIN_IDLE_LED_PORT(tmp);
+ SSYNC();
+
+}
+#else
+static inline void leds_switch(int flag)
+{
+}
+#endif
+
+/*
+ * The idle loop on BFIN
+ */
+#ifdef CONFIG_IDLE_L1
+void default_idle(void)__attribute__((l1_text));
+void cpu_idle(void)__attribute__((l1_text));
+#endif
+
+void default_idle(void)
+{
+ while (!need_resched()) {
+ leds_switch(LED_OFF);
+ local_irq_disable();
+ if (likely(!need_resched()))
+ idle_with_irq_disabled();
+ local_irq_enable();
+ leds_switch(LED_ON);
+ }
+}
+
+void (*idle)(void) = default_idle;
+
+/*
+ * The idle thread. There's no useful work to be
+ * done, so just try to conserve power and have a
+ * low exit latency (ie sit in a loop waiting for
+ * somebody to say that they'd like to reschedule)
+ */
+void cpu_idle(void)
+{
+ /* endless idle loop with no priority at all */
+ while (1) {
+ idle();
+ preempt_enable_no_resched();
+ schedule();
+ preempt_disable();
+ }
+}
+
+void machine_restart(char *__unused)
+{
+#if defined(CONFIG_BLKFIN_CACHE)
+ bfin_write_IMEM_CONTROL(0x01);
+ SSYNC();
+#endif
+ bfin_reset();
+ /* Dont do anything till the reset occurs */
+ while (1) {
+ SSYNC();
+ }
+}
+
+void machine_halt(void)
+{
+ for (;;)
+ asm volatile ("idle");
+}
+
+void machine_power_off(void)
+{
+ for (;;)
+ asm volatile ("idle");
+}
+
+void show_regs(struct pt_regs *regs)
+{
+ printk(KERN_NOTICE "\n");
+ printk(KERN_NOTICE
+ "PC: %08lu Status: %04lu SysStatus: %04lu RETS: %08lu\n",
+ regs->pc, regs->astat, regs->seqstat, regs->rets);
+ printk(KERN_NOTICE
+ "A0.x: %08lx A0.w: %08lx A1.x: %08lx A1.w: %08lx\n",
+ regs->a0x, regs->a0w, regs->a1x, regs->a1w);
+ printk(KERN_NOTICE "P0: %08lx P1: %08lx P2: %08lx P3: %08lx\n",
+ regs->p0, regs->p1, regs->p2, regs->p3);
+ printk(KERN_NOTICE "P4: %08lx P5: %08lx\n", regs->p4, regs->p5);
+ printk(KERN_NOTICE "R0: %08lx R1: %08lx R2: %08lx R3: %08lx\n",
+ regs->r0, regs->r1, regs->r2, regs->r3);
+ printk(KERN_NOTICE "R4: %08lx R5: %08lx R6: %08lx R7: %08lx\n",
+ regs->r4, regs->r5, regs->r6, regs->r7);
+
+ if (!(regs->ipend))
+ printk("USP: %08lx\n", rdusp());
+}
+
+/* Fill in the fpu structure for a core dump. */
+
+int dump_fpu(struct pt_regs *regs, elf_fpregset_t * fpregs)
+{
+ return 1;
+}
+
+/*
+ * This gets run with P1 containing the
+ * function to call, and R1 containing
+ * the "args". Note P0 is clobbered on the way here.
+ */
+void kernel_thread_helper(void);
+__asm__(".section .text\n"
+ ".align 4\n"
+ "_kernel_thread_helper:\n\t"
+ "\tsp += -12;\n\t"
+ "\tr0 = r1;\n\t" "\tcall (p1);\n\t" "\tcall _do_exit;\n" ".previous");
+
+/*
+ * Create a kernel thread.
+ */
+pid_t kernel_thread(int (*fn) (void *), void *arg, unsigned long flags)
+{
+ struct pt_regs regs;
+
+ memset(®s, 0, sizeof(regs));
+
+ regs.r1 = (unsigned long)arg;
+ regs.p1 = (unsigned long)fn;
+ regs.pc = (unsigned long)kernel_thread_helper;
+ regs.orig_p0 = -1;
+ /* Set bit 2 to tell ret_from_fork we should be returning to kernel
+ mode. */
+ regs.ipend = 0x8002;
+ __asm__ __volatile__("%0 = syscfg;":"=da"(regs.syscfg):);
+ return do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0, ®s, 0, NULL,
+ NULL);
+}
+
+void flush_thread(void)
+{
+}
+
+asmlinkage int bfin_vfork(struct pt_regs *regs)
+{
+ return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, rdusp(), regs, 0, NULL,
+ NULL);
+}
+
+asmlinkage int bfin_clone(struct pt_regs *regs)
+{
+ unsigned long clone_flags;
+ unsigned long newsp;
+
+ /* syscall2 puts clone_flags in r0 and usp in r1 */
+ clone_flags = regs->r0;
+ newsp = regs->r1;
+ if (!newsp)
+ newsp = rdusp();
+ else
+ newsp -= 12;
+ return do_fork(clone_flags, newsp, regs, 0, NULL, NULL);
+}
+
+int
+copy_thread(int nr, unsigned long clone_flags,
+ unsigned long usp, unsigned long topstk,
+ struct task_struct *p, struct pt_regs *regs)
+{
+ struct pt_regs *childregs;
+
+ childregs = (struct pt_regs *) (task_stack_page(p) + THREAD_SIZE) - 1;
+ *childregs = *regs;
+ childregs->r0 = 0;
+
+ p->thread.usp = usp;
+ p->thread.ksp = (unsigned long)childregs;
+ p->thread.pc = (unsigned long)ret_from_fork;
+
+ return 0;
+}
+
+/*
+ * fill in the user structure for a core dump..
+ */
+void dump_thread(struct pt_regs *regs, struct user *dump)
+{
+ dump->magic = CMAGIC;
+ dump->start_code = 0;
+ dump->start_stack = rdusp() & ~(PAGE_SIZE - 1);
+ dump->u_tsize = ((unsigned long)current->mm->end_code) >> PAGE_SHIFT;
+ dump->u_dsize = ((unsigned long)(current->mm->brk +
+ (PAGE_SIZE - 1))) >> PAGE_SHIFT;
+ dump->u_dsize -= dump->u_tsize;
+ dump->u_ssize = 0;
+
+ if (dump->start_stack < TASK_SIZE)
+ dump->u_ssize =
+ ((unsigned long)(TASK_SIZE -
+ dump->start_stack)) >> PAGE_SHIFT;
+
+ dump->u_ar0 = (struct user_regs_struct *)((int)&dump->regs - (int)dump);
+
+ dump->regs.r0 = regs->r0;
+ dump->regs.r1 = regs->r1;
+ dump->regs.r2 = regs->r2;
+ dump->regs.r3 = regs->r3;
+ dump->regs.r4 = regs->r4;
+ dump->regs.r5 = regs->r5;
+ dump->regs.r6 = regs->r6;
+ dump->regs.r7 = regs->r7;
+ dump->regs.p0 = regs->p0;
+ dump->regs.p1 = regs->p1;
+ dump->regs.p2 = regs->p2;
+ dump->regs.p3 = regs->p3;
+ dump->regs.p4 = regs->p4;
+ dump->regs.p5 = regs->p5;
+ dump->regs.orig_p0 = regs->orig_p0;
+ dump->regs.a0w = regs->a0w;
+ dump->regs.a1w = regs->a1w;
+ dump->regs.a0x = regs->a0x;
+ dump->regs.a1x = regs->a1x;
+ dump->regs.rets = regs->rets;
+ dump->regs.astat = regs->astat;
+ dump->regs.pc = regs->pc;
+}
+
+/*
+ * sys_execve() executes a new program.
+ */
+
+asmlinkage int sys_execve(char *name, char **argv, char **envp)
+{
+ int error;
+ char *filename;
+ struct pt_regs *regs = (struct pt_regs *)((&name) + 6);
+
+ lock_kernel();
+ filename = getname(name);
+ error = PTR_ERR(filename);
+ if (IS_ERR(filename))
+ goto out;
+ error = do_execve(filename, argv, envp, regs);
+ putname(filename);
+ out:
+ unlock_kernel();
+ return error;
+}
+
+unsigned long get_wchan(struct task_struct *p)
+{
+ unsigned long fp, pc;
+ unsigned long stack_page;
+ int count = 0;
+ if (!p || p == current || p->state == TASK_RUNNING)
+ return 0;
+
+ stack_page = (unsigned long)p;
+ fp = p->thread.usp;
+ do {
+ if (fp < stack_page + sizeof(struct thread_info) ||
+ fp >= 8184 + stack_page)
+ return 0;
+ pc = ((unsigned long *)fp)[1];
+ if (!in_sched_functions(pc))
+ return pc;
+ fp = *(unsigned long *)fp;
+ }
+ while (count++ < 16);
+ return 0;
+}
+
+#if defined(CONFIG_ACCESS_CHECK)
+int _access_ok(unsigned long addr, unsigned long size)
+{
+
+ if (addr > (addr + size))
+ return 0;
+ if (segment_eq(get_fs(),KERNEL_DS))
+ return 1;
+#ifdef CONFIG_MTD_UCLINUX
+ if (addr >= memory_start && (addr + size) <= memory_end)
+ return 1;
+ if (addr >= memory_mtd_end && (addr + size) <= physical_mem_end)
+ return 1;
+#else
+ if (addr >= memory_start && (addr + size) <= physical_mem_end)
+ return 1;
+#endif
+ if (addr >= (unsigned long)__init_begin &&
+ addr + size <= (unsigned long)__init_end)
+ return 1;
+ if (addr >= L1_SCRATCH_START
+ && addr + size <= L1_SCRATCH_START + L1_SCRATCH_LENGTH)
+ return 1;
+#if L1_CODE_LENGTH != 0
+ if (addr >= L1_CODE_START + (_etext_l1 - _stext_l1)
+ && addr + size <= L1_CODE_START + L1_CODE_LENGTH)
+ return 1;
+#endif
+#if L1_DATA_A_LENGTH != 0
+ if (addr >= L1_DATA_A_START + (_ebss_l1 - _sdata_l1)
+ && addr + size <= L1_DATA_A_START + L1_DATA_A_LENGTH)
+ return 1;
+#endif
+#if L1_DATA_B_LENGTH != 0
+ if (addr >= L1_DATA_B_START
+ && addr + size <= L1_DATA_B_START + L1_DATA_B_LENGTH)
+ return 1;
+#endif
+ return 0;
+}
+EXPORT_SYMBOL(_access_ok);
+#endif /* CONFIG_ACCESS_CHECK */
diff --git a/arch/blackfin/kernel/ptrace.c b/arch/blackfin/kernel/ptrace.c
new file mode 100644
index 0000000..d7c8e51
--- /dev/null
+++ b/arch/blackfin/kernel/ptrace.c
@@ -0,0 +1,430 @@
+/*
+ * File: arch/blackfin/kernel/ptrace.c
+ * Based on: Taken from linux/kernel/ptrace.c
+ * Author: linux/kernel/ptrace.c is by Ross Biro 1/23/92, edited by Linus Torvalds
+ *
+ * Created: 1/23/92
+ * Description:
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/errno.h>
+#include <linux/ptrace.h>
+#include <linux/user.h>
+#include <linux/signal.h>
+
+#include <asm/uaccess.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/system.h>
+#include <asm/processor.h>
+#include <asm/asm-offsets.h>
+#include <asm/dma.h>
+
+#define MAX_SHARED_LIBS 3
+#define TEXT_OFFSET 0
+/*
+ * does not yet catch signals sent when the child dies.
+ * in exit.c or in signal.c.
+ */
+
+/* determines which bits in the SYSCFG reg the user has access to. */
+/* 1 = access 0 = no access */
+#define SYSCFG_MASK 0x0007 /* SYSCFG reg */
+/* sets the trace bits. */
+#define TRACE_BITS 0x0001
+
+/* Find the stack offset for a register, relative to thread.esp0. */
+#define PT_REG(reg) ((long)&((struct pt_regs *)0)->reg)
+
+/*
+ * Get the address of the live pt_regs for the specified task.
+ * These are saved onto the top kernel stack when the process
+ * is not running.
+ *
+ * Note: if a user thread is execve'd from kernel space, the
+ * kernel stack will not be empty on entry to the kernel, so
+ * ptracing these tasks will fail.
+ */
+static inline struct pt_regs *get_user_regs(struct task_struct *task)
+{
+ return (struct pt_regs *)
+ ((unsigned long)task->thread_info +
+ (THREAD_SIZE - sizeof(struct pt_regs)));
+}
+
+/*
+ * Get all user integer registers.
+ */
+static inline int ptrace_getregs(struct task_struct *tsk, void __user * uregs)
+{
+ struct pt_regs *regs = get_user_regs(tsk);
+ return copy_to_user(uregs, regs, sizeof(struct pt_regs)) ? -EFAULT : 0;
+}
+
+/* Mapping from PT_xxx to the stack offset at which the register is
+ * saved. Notice that usp has no stack-slot and needs to be treated
+ * specially (see get_reg/put_reg below).
+ */
+
+/*
+ * Get contents of register REGNO in task TASK.
+ */
+static inline long get_reg(struct task_struct *task, int regno)
+{
+ unsigned char *reg_ptr;
+
+ struct pt_regs *regs =
+ (struct pt_regs *)((unsigned long)task->thread_info +
+ (THREAD_SIZE - sizeof(struct pt_regs)));
+ reg_ptr = (char *)regs;
+
+ switch (regno) {
+ case PT_USP:
+ return task->thread.usp;
+ default:
+ if (regno <= 216)
+ return *(long *)(reg_ptr + regno);
+ }
+ /* slight mystery ... never seems to come here but kernel misbehaves without this code! */
+
+ printk(KERN_WARNING "Request to get for unknown register %d\n", regno);
+ return 0;
+}
+
+/*
+ * Write contents of register REGNO in task TASK.
+ */
+static inline int
+put_reg(struct task_struct *task, int regno, unsigned long data)
+{
+ char * reg_ptr;
+
+ struct pt_regs *regs =
+ (struct pt_regs *)((unsigned long)task->thread_info +
+ (THREAD_SIZE - sizeof(struct pt_regs)));
+ reg_ptr = (char *)regs;
+
+ switch (regno) {
+ case PT_PC:
+ /*********************************************************************/
+ /* At this point the kernel is most likely in exception. */
+ /* The RETX register will be used to populate the pc of the process. */
+ /*********************************************************************/
+ regs->retx = data;
+ regs->pc = data;
+ break;
+ case PT_RETX:
+ break; /* regs->retx = data; break; */
+ case PT_USP:
+ regs->usp = data;
+ task->thread.usp = data;
+ break;
+ default:
+ if (regno <= 216)
+ *(long *)(reg_ptr + regno) = data;
+ }
+ return 0;
+}
+
+/*
+ * check that an address falls within the bounds of the target process's memory mappings
+ */
+static inline int is_user_addr_valid(struct task_struct *child,
+ unsigned long start, unsigned long len)
+{
+ struct vm_list_struct *vml;
+ struct sram_list_struct *sraml;
+
+ for (vml = child->mm->context.vmlist; vml; vml = vml->next)
+ if (start >= vml->vma->vm_start && start + len <= vml->vma->vm_end)
+ return 0;
+
+ for (sraml = child->mm->context.sram_list; sraml; sraml = sraml->next)
+ if (start >= (unsigned long)sraml->addr
+ && start + len <= (unsigned long)sraml->addr + sraml->length)
+ return 0;
+
+ return -EIO;
+}
+
+/*
+ * Called by kernel/ptrace.c when detaching..
+ *
+ * Make sure the single step bit is not set.
+ */
+void ptrace_disable(struct task_struct *child)
+{
+ unsigned long tmp;
+ /* make sure the single step bit is not set. */
+ tmp = get_reg(child, PT_SR) & ~(TRACE_BITS << 16);
+ put_reg(child, PT_SR, tmp);
+}
+
+long arch_ptrace(struct task_struct *child, long request, long addr, long data)
+{
+ int ret;
+ int add = 0;
+
+ switch (request) {
+ /* when I and D space are separate, these will need to be fixed. */
+ case PTRACE_PEEKDATA:
+ pr_debug("ptrace: PEEKDATA\n");
+ add = MAX_SHARED_LIBS * 4; /* space between text and data */
+ /* fall through */
+ case PTRACE_PEEKTEXT: /* read word at location addr. */
+ {
+ unsigned long tmp = 0;
+ int copied;
+
+ ret = -EIO;
+ pr_debug("ptrace: PEEKTEXT at addr 0x%08lx + add %d %ld\n", addr, add,
+ sizeof(data));
+ if (is_user_addr_valid(child, addr + add, sizeof(tmp)) < 0)
+ break;
+ pr_debug("ptrace: user address is valid\n");
+
+#if L1_CODE_LENGTH != 0
+ if (addr + add >= L1_CODE_START
+ && addr + add + sizeof(tmp) <= L1_CODE_START + L1_CODE_LENGTH) {
+ safe_dma_memcpy (&tmp, (const void *)(addr + add), sizeof(tmp));
+ copied = sizeof(tmp);
+ } else
+#endif
+ copied =
+ access_process_vm(child, addr + add, &tmp,
+ sizeof(tmp), 0);
+ pr_debug("ptrace: copied size %d [0x%08lx]\n", copied, tmp);
+ if (copied != sizeof(tmp))
+ break;
+ ret = put_user(tmp, (unsigned long *)data);
+ break;
+ }
+
+ /* read the word at location addr in the USER area. */
+ case PTRACE_PEEKUSR:
+ {
+ unsigned long tmp;
+ ret = -EIO;
+ tmp = 0;
+ if ((addr & 3) || (addr > (sizeof(struct pt_regs) + 16))) {
+ printk(KERN_WARNING "ptrace error : PEEKUSR : temporarily returning "
+ "0 - %x sizeof(pt_regs) is %lx\n",
+ (int)addr, sizeof(struct pt_regs));
+ break;
+ }
+ if (addr == sizeof(struct pt_regs)) {
+ /* PT_TEXT_ADDR */
+ tmp = child->mm->start_code + TEXT_OFFSET;
+ } else if (addr == (sizeof(struct pt_regs) + 4)) {
+ /* PT_TEXT_END_ADDR */
+ tmp = child->mm->end_code;
+ } else if (addr == (sizeof(struct pt_regs) + 8)) {
+ /* PT_DATA_ADDR */
+ tmp = child->mm->start_data;
+#ifdef CONFIG_BINFMT_ELF_FDPIC
+ } else if (addr == (sizeof(struct pt_regs) + 12)) {
+ tmp = child->mm->context.exec_fdpic_loadmap;
+ } else if (addr == (sizeof(struct pt_regs) + 16)) {
+ tmp = child->mm->context.interp_fdpic_loadmap;
+#endif
+ } else {
+ tmp = get_reg(child, addr);
+ }
+ ret = put_user(tmp, (unsigned long *)data);
+ break;
+ }
+
+ /* when I and D space are separate, this will have to be fixed. */
+ case PTRACE_POKEDATA:
+ printk(KERN_NOTICE "ptrace: PTRACE_PEEKDATA\n");
+ /* fall through */
+ case PTRACE_POKETEXT: /* write the word at location addr. */
+ {
+ int copied;
+
+ ret = -EIO;
+ pr_debug("ptrace: POKETEXT at addr 0x%08lx + add %d %ld bytes %lx\n",
+ addr, add, sizeof(data), data);
+ if (is_user_addr_valid(child, addr + add, sizeof(data)) < 0)
+ break;
+ pr_debug("ptrace: user address is valid\n");
+
+#if L1_CODE_LENGTH != 0
+ if (addr + add >= L1_CODE_START
+ && addr + add + sizeof(data) <= L1_CODE_START + L1_CODE_LENGTH) {
+ safe_dma_memcpy ((void *)(addr + add), &data, sizeof(data));
+ copied = sizeof(data);
+ } else
+#endif
+ copied =
+ access_process_vm(child, addr + add, &data,
+ sizeof(data), 1);
+ pr_debug("ptrace: copied size %d\n", copied);
+ if (copied != sizeof(data))
+ break;
+ ret = 0;
+ break;
+ }
+
+ case PTRACE_POKEUSR: /* write the word at location addr in the USER area */
+ ret = -EIO;
+ if ((addr & 3) || (addr > (sizeof(struct pt_regs) + 16))) {
+ printk(KERN_WARNING "ptrace error : POKEUSR: temporarily returning 0\n");
+ break;
+ }
+
+ if (addr >= (sizeof(struct pt_regs))) {
+ ret = 0;
+ break;
+ }
+ if (addr == PT_SYSCFG) {
+ data &= SYSCFG_MASK;
+ data |= get_reg(child, PT_SYSCFG);
+ }
+ ret = put_reg(child, addr, data);
+ break;
+
+ case PTRACE_SYSCALL: /* continue and stop at next (return from) syscall */
+ case PTRACE_CONT:
+ { /* restart after signal. */
+ long tmp;
+
+ pr_debug("ptrace_cont\n");
+
+ ret = -EIO;
+ if (!valid_signal(data))
+ break;
+ if (request == PTRACE_SYSCALL)
+ set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
+ else
+ clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
+
+ child->exit_code = data;
+ /* make sure the single step bit is not set. */
+ tmp = get_reg(child, PT_SYSCFG) & ~(TRACE_BITS);
+ put_reg(child, PT_SYSCFG, tmp);
+ pr_debug("before wake_up_process\n");
+ wake_up_process(child);
+ ret = 0;
+ break;
+ }
+
+ /*
+ * make the child exit. Best I can do is send it a sigkill.
+ * perhaps it should be put in the status that it wants to
+ * exit.
+ */
+ case PTRACE_KILL:
+ {
+ long tmp;
+ ret = 0;
+ if (child->exit_state == EXIT_ZOMBIE) /* already dead */
+ break;
+ child->exit_code = SIGKILL;
+ /* make sure the single step bit is not set. */
+ tmp = get_reg(child, PT_SYSCFG) & ~(TRACE_BITS);
+ put_reg(child, PT_SYSCFG, tmp);
+ wake_up_process(child);
+ break;
+ }
+
+ case PTRACE_SINGLESTEP:
+ { /* set the trap flag. */
+ long tmp;
+
+ pr_debug("single step\n");
+ ret = -EIO;
+ if (!valid_signal(data))
+ break;
+ clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
+
+ tmp = get_reg(child, PT_SYSCFG) | (TRACE_BITS);
+ put_reg(child, PT_SYSCFG, tmp);
+
+ child->exit_code = data;
+ /* give it a chance to run. */
+ wake_up_process(child);
+ ret = 0;
+ break;
+ }
+
+ case PTRACE_DETACH:
+ { /* detach a process that was attached. */
+ ret = ptrace_detach(child, data);
+ break;
+ }
+
+ case PTRACE_GETREGS:
+ {
+
+ /* Get all gp regs from the child. */
+ ret = ptrace_getregs(child, (void __user *)data);
+ break;
+ }
+
+ case PTRACE_SETREGS:
+ {
+ printk(KERN_NOTICE
+ "ptrace: SETREGS: **** NOT IMPLEMENTED ***\n");
+ /* Set all gp regs in the child. */
+ ret = 0;
+ break;
+ }
+ default:
+ ret = ptrace_request(child, request, addr, data);
+ break;
+ }
+
+ return ret;
+}
+
+asmlinkage void syscall_trace(void)
+{
+
+ if (!test_thread_flag(TIF_SYSCALL_TRACE))
+ return;
+
+ if (!(current->ptrace & PT_PTRACED))
+ return;
+
+ /* the 0x80 provides a way for the tracing parent to distinguish
+ * between a syscall stop and SIGTRAP delivery
+ */
+ ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD)
+ ? 0x80 : 0));
+
+ /*
+ * this isn't the same as continuing with a signal, but it will do
+ * for normal use. strace only continues with a signal if the
+ * stopping signal is not SIGTRAP. -brl
+ */
+ if (current->exit_code) {
+ send_sig(current->exit_code, current, 1);
+ current->exit_code = 0;
+ }
+}
diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c
new file mode 100644
index 0000000..342bb8d
--- /dev/null
+++ b/arch/blackfin/kernel/setup.c
@@ -0,0 +1,902 @@
+/*
+ * File: arch/blackfin/kernel/setup.c
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/delay.h>
+#include <linux/console.h>
+#include <linux/bootmem.h>
+#include <linux/seq_file.h>
+#include <linux/cpu.h>
+#include <linux/module.h>
+#include <linux/console.h>
+#include <linux/tty.h>
+
+#include <linux/ext2_fs.h>
+#include <linux/cramfs_fs.h>
+#include <linux/romfs_fs.h>
+
+#include <asm/cacheflush.h>
+#include <asm/blackfin.h>
+#include <asm/cplbinit.h>
+
+unsigned long memory_start, memory_end, physical_mem_end;
+unsigned long reserved_mem_dcache_on;
+unsigned long reserved_mem_icache_on;
+EXPORT_SYMBOL(memory_start);
+EXPORT_SYMBOL(memory_end);
+EXPORT_SYMBOL(physical_mem_end);
+EXPORT_SYMBOL(_ramend);
+
+#ifdef CONFIG_MTD_UCLINUX
+unsigned long memory_mtd_end, memory_mtd_start, mtd_size;
+unsigned long _ebss;
+EXPORT_SYMBOL(memory_mtd_end);
+EXPORT_SYMBOL(memory_mtd_start);
+EXPORT_SYMBOL(mtd_size);
+#endif
+
+char command_line[COMMAND_LINE_SIZE];
+
+#if defined(CONFIG_BLKFIN_DCACHE) || defined(CONFIG_BLKFIN_CACHE)
+static void generate_cpl_tables(void);
+#endif
+
+void __init bf53x_cache_init(void)
+{
+#if defined(CONFIG_BLKFIN_DCACHE) || defined(CONFIG_BLKFIN_CACHE)
+ generate_cpl_tables();
+#endif
+
+#ifdef CONFIG_BLKFIN_CACHE
+ bfin_icache_init();
+ printk(KERN_INFO "Instruction Cache Enabled\n");
+#endif
+
+#ifdef CONFIG_BLKFIN_DCACHE
+ bfin_dcache_init();
+ printk(KERN_INFO "Data Cache Enabled"
+# if defined CONFIG_BLKFIN_WB
+ " (write-back)"
+# elif defined CONFIG_BLKFIN_WT
+ " (write-through)"
+# endif
+ "\n");
+#endif
+}
+
+void bf53x_relocate_l1_mem(void)
+{
+ unsigned long l1_code_length;
+ unsigned long l1_data_a_length;
+ unsigned long l1_data_b_length;
+
+ l1_code_length = _etext_l1 - _stext_l1;
+ if (l1_code_length > L1_CODE_LENGTH)
+ l1_code_length = L1_CODE_LENGTH;
+ /* cannot complain as printk is not available as yet.
+ * But we can continue booting and complain later!
+ */
+
+ /* Copy _stext_l1 to _etext_l1 to L1 instruction SRAM */
+ dma_memcpy(_stext_l1, _l1_lma_start, l1_code_length);
+
+ l1_data_a_length = _ebss_l1 - _sdata_l1;
+ if (l1_data_a_length > L1_DATA_A_LENGTH)
+ l1_data_a_length = L1_DATA_A_LENGTH;
+
+ /* Copy _sdata_l1 to _ebss_l1 to L1 data bank A SRAM */
+ dma_memcpy(_sdata_l1, _l1_lma_start + l1_code_length, l1_data_a_length);
+
+ l1_data_b_length = _ebss_b_l1 - _sdata_b_l1;
+ if (l1_data_b_length > L1_DATA_B_LENGTH)
+ l1_data_b_length = L1_DATA_B_LENGTH;
+
+ /* Copy _sdata_b_l1 to _ebss_b_l1 to L1 data bank B SRAM */
+ dma_memcpy(_sdata_b_l1, _l1_lma_start + l1_code_length +
+ l1_data_a_length, l1_data_b_length);
+
+}
+
+/*
+ * Initial parsing of the command line. Currently, we support:
+ * - Controlling the linux memory size: mem=xxx[KMG]
+ * - Controlling the physical memory size: max_mem=xxx[KMG][$][#]
+ * $ -> reserved memory is dcacheable
+ * # -> reserved memory is icacheable
+ */
+static __init void parse_cmdline_early(char *cmdline_p)
+{
+ char c = ' ', *to = cmdline_p;
+ unsigned int memsize;
+ for (;;) {
+ if (c == ' ') {
+
+ if (!memcmp(to, "mem=", 4)) {
+ to += 4;
+ memsize = memparse(to, &to);
+ if (memsize)
+ _ramend = memsize;
+
+ } else if (!memcmp(to, "max_mem=", 8)) {
+ to += 8;
+ memsize = memparse(to, &to);
+ if (memsize) {
+ physical_mem_end = memsize;
+ if (*to != ' ') {
+ if (*to == '$'
+ || *(to + 1) == '$')
+ reserved_mem_dcache_on =
+ 1;
+ if (*to == '#'
+ || *(to + 1) == '#')
+ reserved_mem_icache_on =
+ 1;
+ }
+ }
+ }
+
+ }
+ c = *(to++);
+ if (!c)
+ break;
+ }
+}
+
+void __init setup_arch(char **cmdline_p)
+{
+ int bootmap_size;
+ unsigned long l1_length, sclk, cclk;
+#ifdef CONFIG_MTD_UCLINUX
+ unsigned long mtd_phys = 0;
+#endif
+
+ cclk = get_cclk();
+ sclk = get_sclk();
+
+#if !defined(CONFIG_BFIN_KERNEL_CLOCK) && defined(ANOMALY_05000273)
+ if (cclk == sclk)
+ panic("ANOMALY 05000273, SCLK can not be same as CCLK");
+#endif
+
+#if defined(ANOMALY_05000266)
+ bfin_read_IMDMA_D0_IRQ_STATUS();
+ bfin_read_IMDMA_D1_IRQ_STATUS();
+#endif
+
+#ifdef DEBUG_SERIAL_EARLY_INIT
+ bfin_console_init(); /* early console registration */
+ /* this give a chance to get printk() working before crash. */
+#endif
+
+#if defined(CONFIG_CHR_DEV_FLASH) || defined(CONFIG_BLK_DEV_FLASH)
+ /* we need to initialize the Flashrom device here since we might
+ * do things with flash early on in the boot
+ */
+ flash_probe();
+#endif
+
+#if defined(CONFIG_CMDLINE_BOOL)
+ memset(command_line, 0, sizeof(command_line));
+ strncpy(&command_line[0], CONFIG_CMDLINE, sizeof(command_line));
+ command_line[sizeof(command_line) - 1] = 0;
+#endif
+
+ /* Keep a copy of command line */
+ *cmdline_p = &command_line[0];
+ memcpy(boot_command_line, command_line, COMMAND_LINE_SIZE);
+ boot_command_line[COMMAND_LINE_SIZE - 1] = 0;
+
+ /* setup memory defaults from the user config */
+ physical_mem_end = 0;
+ _ramend = CONFIG_MEM_SIZE * 1024 * 1024;
+
+ parse_cmdline_early(&command_line[0]);
+
+ if (physical_mem_end == 0)
+ physical_mem_end = _ramend;
+
+ /* by now the stack is part of the init task */
+ memory_end = _ramend - DMA_UNCACHED_REGION;
+
+ _ramstart = (unsigned long)__bss_stop;
+ memory_start = PAGE_ALIGN(_ramstart);
+
+#if defined(CONFIG_MTD_UCLINUX)
+ /* generic memory mapped MTD driver */
+ memory_mtd_end = memory_end;
+
+ mtd_phys = _ramstart;
+ mtd_size = PAGE_ALIGN(*((unsigned long *)(mtd_phys + 8)));
+
+# if defined(CONFIG_EXT2_FS) || defined(CONFIG_EXT3_FS)
+ if (*((unsigned short *)(mtd_phys + 0x438)) == EXT2_SUPER_MAGIC)
+ mtd_size =
+ PAGE_ALIGN(*((unsigned long *)(mtd_phys + 0x404)) << 10);
+# endif
+
+# if defined(CONFIG_CRAMFS)
+ if (*((unsigned long *)(mtd_phys)) == CRAMFS_MAGIC)
+ mtd_size = PAGE_ALIGN(*((unsigned long *)(mtd_phys + 0x4)));
+# endif
+
+# if defined(CONFIG_ROMFS_FS)
+ if (((unsigned long *)mtd_phys)[0] == ROMSB_WORD0
+ && ((unsigned long *)mtd_phys)[1] == ROMSB_WORD1)
+ mtd_size =
+ PAGE_ALIGN(be32_to_cpu(((unsigned long *)mtd_phys)[2]));
+# if (defined(CONFIG_BLKFIN_CACHE) && defined(ANOMALY_05000263))
+ /* Due to a Hardware Anomaly we need to limit the size of usable
+ * instruction memory to max 60MB, 56 if HUNT_FOR_ZERO is on
+ * 05000263 - Hardware loop corrupted when taking an ICPLB exception
+ */
+# if (defined(CONFIG_DEBUG_HUNT_FOR_ZERO))
+ if (memory_end >= 56 * 1024 * 1024)
+ memory_end = 56 * 1024 * 1024;
+# else
+ if (memory_end >= 60 * 1024 * 1024)
+ memory_end = 60 * 1024 * 1024;
+# endif /* CONFIG_DEBUG_HUNT_FOR_ZERO */
+# endif /* ANOMALY_05000263 */
+# endif /* CONFIG_ROMFS_FS */
+
+ memory_end -= mtd_size;
+
+ if (mtd_size == 0) {
+ console_init();
+ panic("Don't boot kernel without rootfs attached.\n");
+ }
+
+ /* Relocate MTD image to the top of memory after the uncached memory area */
+ dma_memcpy((char *)memory_end, __bss_stop, mtd_size);
+
+ memory_mtd_start = memory_end;
+ _ebss = memory_mtd_start; /* define _ebss for compatible */
+#endif /* CONFIG_MTD_UCLINUX */
+
+#if (defined(CONFIG_BLKFIN_CACHE) && defined(ANOMALY_05000263))
+ /* Due to a Hardware Anomaly we need to limit the size of usable
+ * instruction memory to max 60MB, 56 if HUNT_FOR_ZERO is on
+ * 05000263 - Hardware loop corrupted when taking an ICPLB exception
+ */
+#if (defined(CONFIG_DEBUG_HUNT_FOR_ZERO))
+ if (memory_end >= 56 * 1024 * 1024)
+ memory_end = 56 * 1024 * 1024;
+#else
+ if (memory_end >= 60 * 1024 * 1024)
+ memory_end = 60 * 1024 * 1024;
+#endif /* CONFIG_DEBUG_HUNT_FOR_ZERO */
+ printk(KERN_NOTICE "Warning: limiting memory to %liMB due to hardware anomaly 05000263\n", memory_end >> 20);
+#endif /* ANOMALY_05000263 */
+
+#if !defined(CONFIG_MTD_UCLINUX)
+ memory_end -= SIZE_4K; /*In case there is no valid CPLB behind memory_end make sure we don't get to close*/
+#endif
+ init_mm.start_code = (unsigned long)_stext;
+ init_mm.end_code = (unsigned long)_etext;
+ init_mm.end_data = (unsigned long)_edata;
+ init_mm.brk = (unsigned long)0;
+
+ init_leds();
+
+ printk(KERN_INFO "Blackfin support (C) 2004-2007 Analog Devices, Inc.\n");
+ printk(KERN_INFO "Compiled for ADSP-%s Rev 0.%d\n", CPU, bfin_compiled_revid());
+ if (bfin_revid() != bfin_compiled_revid())
+ printk(KERN_ERR "Warning: Compiled for Rev %d, but running on Rev %d\n",
+ bfin_compiled_revid(), bfin_revid());
+ if (bfin_revid() < SUPPORTED_REVID)
+ printk(KERN_ERR "Warning: Unsupported Chip Revision ADSP-%s Rev 0.%d detected\n",
+ CPU, bfin_revid());
+ printk(KERN_INFO "Blackfin Linux support by http://blackfin.uclinux.org/\n");
+
+ printk(KERN_INFO "Processor Speed: %lu MHz core clock and %lu Mhz System Clock\n",
+ cclk / 1000000, sclk / 1000000);
+
+#if defined(ANOMALY_05000273)
+ if ((cclk >> 1) <= sclk)
+ printk("\n\n\nANOMALY_05000273: CCLK must be >= 2*SCLK !!!\n\n\n");
+#endif
+
+ printk(KERN_INFO "Board Memory: %ldMB\n", physical_mem_end >> 20);
+ printk(KERN_INFO "Kernel Managed Memory: %ldMB\n", _ramend >> 20);
+
+ printk(KERN_INFO "Memory map:\n"
+ KERN_INFO " text = 0x%p-0x%p\n"
+ KERN_INFO " init = 0x%p-0x%p\n"
+ KERN_INFO " data = 0x%p-0x%p\n"
+ KERN_INFO " stack = 0x%p-0x%p\n"
+ KERN_INFO " bss = 0x%p-0x%p\n"
+ KERN_INFO " available = 0x%p-0x%p\n"
+#ifdef CONFIG_MTD_UCLINUX
+ KERN_INFO " rootfs = 0x%p-0x%p\n"
+#endif
+#if DMA_UNCACHED_REGION > 0
+ KERN_INFO " DMA Zone = 0x%p-0x%p\n"
+#endif
+ , _stext, _etext,
+ __init_begin, __init_end,
+ _sdata, _edata,
+ (void*)&init_thread_union, (void*)((int)(&init_thread_union) + 0x2000),
+ __bss_start, __bss_stop,
+ (void*)_ramstart, (void*)memory_end
+#ifdef CONFIG_MTD_UCLINUX
+ , (void*)memory_mtd_start, (void*)(memory_mtd_start + mtd_size)
+#endif
+#if DMA_UNCACHED_REGION > 0
+ , (void*)(_ramend - DMA_UNCACHED_REGION), (void*)(_ramend)
+#endif
+ );
+
+ /*
+ * give all the memory to the bootmap allocator, tell it to put the
+ * boot mem_map at the start of memory
+ */
+ bootmap_size = init_bootmem_node(NODE_DATA(0), memory_start >> PAGE_SHIFT, /* map goes here */
+ PAGE_OFFSET >> PAGE_SHIFT,
+ memory_end >> PAGE_SHIFT);
+ /*
+ * free the usable memory, we have to make sure we do not free
+ * the bootmem bitmap so we then reserve it after freeing it :-)
+ */
+ free_bootmem(memory_start, memory_end - memory_start);
+
+ reserve_bootmem(memory_start, bootmap_size);
+ /*
+ * get kmalloc into gear
+ */
+ paging_init();
+
+ /* check the size of the l1 area */
+ l1_length = _etext_l1 - _stext_l1;
+ if (l1_length > L1_CODE_LENGTH)
+ panic("L1 memory overflow\n");
+
+ l1_length = _ebss_l1 - _sdata_l1;
+ if (l1_length > L1_DATA_A_LENGTH)
+ panic("L1 memory overflow\n");
+
+ bf53x_cache_init();
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+# if defined(CONFIG_BFIN_SHARED_FLASH_ENET) && defined(CONFIG_BFIN533_STAMP)
+ /* setup BF533_STAMP CPLD to route AMS3 to Ethernet MAC */
+ bfin_write_FIO_DIR(bfin_read_FIO_DIR() | (1 << CONFIG_ENET_FLASH_PIN));
+ bfin_write_FIO_FLAG_S(1 << CONFIG_ENET_FLASH_PIN);
+ SSYNC();
+# endif
+# if defined (CONFIG_BFIN561_EZKIT)
+ bfin_write_FIO0_DIR(bfin_read_FIO0_DIR() | (1 << 12));
+ SSYNC();
+# endif /* defined (CONFIG_BFIN561_EZKIT) */
+#endif
+
+ printk(KERN_INFO "Hardware Trace Enabled\n");
+ bfin_write_TBUFCTL(0x03);
+}
+
+#if defined(CONFIG_BF561)
+static struct cpu cpu[2];
+#else
+static struct cpu cpu[1];
+#endif
+static int __init topology_init(void)
+{
+#if defined (CONFIG_BF561)
+ register_cpu(&cpu[0], 0);
+ register_cpu(&cpu[1], 1);
+ return 0;
+#else
+ return register_cpu(cpu, 0);
+#endif
+}
+
+subsys_initcall(topology_init);
+
+#if defined(CONFIG_BLKFIN_DCACHE) || defined(CONFIG_BLKFIN_CACHE)
+u16 lock_kernel_check(u32 start, u32 end)
+{
+ if ((start <= (u32) _stext && end >= (u32) _end)
+ || (start >= (u32) _stext && end <= (u32) _end))
+ return IN_KERNEL;
+ return 0;
+}
+
+static unsigned short __init
+fill_cplbtab(struct cplb_tab *table,
+ unsigned long start, unsigned long end,
+ unsigned long block_size, unsigned long cplb_data)
+{
+ int i;
+
+ switch (block_size) {
+ case SIZE_4M:
+ i = 3;
+ break;
+ case SIZE_1M:
+ i = 2;
+ break;
+ case SIZE_4K:
+ i = 1;
+ break;
+ case SIZE_1K:
+ default:
+ i = 0;
+ break;
+ }
+
+ cplb_data = (cplb_data & ~(3 << 16)) | (i << 16);
+
+ while ((start < end) && (table->pos < table->size)) {
+
+ table->tab[table->pos++] = start;
+
+ if (lock_kernel_check(start, start + block_size) == IN_KERNEL)
+ table->tab[table->pos++] =
+ cplb_data | CPLB_LOCK | CPLB_DIRTY;
+ else
+ table->tab[table->pos++] = cplb_data;
+
+ start += block_size;
+ }
+ return 0;
+}
+
+static unsigned short __init
+close_cplbtab(struct cplb_tab *table)
+{
+
+ while (table->pos < table->size) {
+
+ table->tab[table->pos++] = 0;
+ table->tab[table->pos++] = 0; /* !CPLB_VALID */
+ }
+ return 0;
+}
+
+static void __init generate_cpl_tables(void)
+{
+
+ u16 i, j, process;
+ u32 a_start, a_end, as, ae, as_1m;
+
+ struct cplb_tab *t_i = NULL;
+ struct cplb_tab *t_d = NULL;
+ struct s_cplb cplb;
+
+ cplb.init_i.size = MAX_CPLBS;
+ cplb.init_d.size = MAX_CPLBS;
+ cplb.switch_i.size = MAX_SWITCH_I_CPLBS;
+ cplb.switch_d.size = MAX_SWITCH_D_CPLBS;
+
+ cplb.init_i.pos = 0;
+ cplb.init_d.pos = 0;
+ cplb.switch_i.pos = 0;
+ cplb.switch_d.pos = 0;
+
+ cplb.init_i.tab = icplb_table;
+ cplb.init_d.tab = dcplb_table;
+ cplb.switch_i.tab = ipdt_table;
+ cplb.switch_d.tab = dpdt_table;
+
+ cplb_data[SDRAM_KERN].end = memory_end;
+
+#ifdef CONFIG_MTD_UCLINUX
+ cplb_data[SDRAM_RAM_MTD].start = memory_mtd_start;
+ cplb_data[SDRAM_RAM_MTD].end = memory_mtd_start + mtd_size;
+ cplb_data[SDRAM_RAM_MTD].valid = mtd_size > 0;
+# if defined(CONFIG_ROMFS_FS)
+ cplb_data[SDRAM_RAM_MTD].attr |= I_CPLB;
+
+ /*
+ * The ROMFS_FS size is often not multiple of 1MB.
+ * This can cause multiple CPLB sets covering the same memory area.
+ * This will then cause multiple CPLB hit exceptions.
+ * Workaround: We ensure a contiguous memory area by extending the kernel
+ * memory section over the mtd section.
+ * For ROMFS_FS memory must be covered with ICPLBs anyways.
+ * So there is no difference between kernel and mtd memory setup.
+ */
+
+ cplb_data[SDRAM_KERN].end = memory_mtd_start + mtd_size;;
+ cplb_data[SDRAM_RAM_MTD].valid = 0;
+
+# endif
+#else
+ cplb_data[SDRAM_RAM_MTD].valid = 0;
+#endif
+
+ cplb_data[SDRAM_DMAZ].start = _ramend - DMA_UNCACHED_REGION;
+ cplb_data[SDRAM_DMAZ].end = _ramend;
+
+ cplb_data[RES_MEM].start = _ramend;
+ cplb_data[RES_MEM].end = physical_mem_end;
+
+ if (reserved_mem_dcache_on)
+ cplb_data[RES_MEM].d_conf = SDRAM_DGENERIC;
+ else
+ cplb_data[RES_MEM].d_conf = SDRAM_DNON_CHBL;
+
+ if (reserved_mem_icache_on)
+ cplb_data[RES_MEM].i_conf = SDRAM_IGENERIC;
+ else
+ cplb_data[RES_MEM].i_conf = SDRAM_INON_CHBL;
+
+ for (i = ZERO_P; i <= L2_MEM; i++) {
+
+ if (cplb_data[i].valid) {
+
+ as_1m = cplb_data[i].start % SIZE_1M;
+
+ /* We need to make sure all sections are properly 1M aligned
+ * However between Kernel Memory and the Kernel mtd section, depending on the
+ * rootfs size, there can be overlapping memory areas.
+ */
+
+ if (as_1m && i!=L1I_MEM && i!=L1D_MEM) {
+#ifdef CONFIG_MTD_UCLINUX
+ if (i == SDRAM_RAM_MTD) {
+ if ((cplb_data[SDRAM_KERN].end + 1) > cplb_data[SDRAM_RAM_MTD].start)
+ cplb_data[SDRAM_RAM_MTD].start = (cplb_data[i].start & (-2*SIZE_1M)) + SIZE_1M;
+ else
+ cplb_data[SDRAM_RAM_MTD].start = (cplb_data[i].start & (-2*SIZE_1M));
+ } else
+#endif
+ printk(KERN_WARNING "Unaligned Start of %s at 0x%X\n",
+ cplb_data[i].name, cplb_data[i].start);
+ }
+
+ as = cplb_data[i].start % SIZE_4M;
+ ae = cplb_data[i].end % SIZE_4M;
+
+ if (as)
+ a_start = cplb_data[i].start + (SIZE_4M - (as));
+ else
+ a_start = cplb_data[i].start;
+
+ a_end = cplb_data[i].end - ae;
+
+ for (j = INITIAL_T; j <= SWITCH_T; j++) {
+
+ switch (j) {
+ case INITIAL_T:
+ if (cplb_data[i].attr & INITIAL_T) {
+ t_i = &cplb.init_i;
+ t_d = &cplb.init_d;
+ process = 1;
+ } else
+ process = 0;
+ break;
+ case SWITCH_T:
+ if (cplb_data[i].attr & SWITCH_T) {
+ t_i = &cplb.switch_i;
+ t_d = &cplb.switch_d;
+ process = 1;
+ } else
+ process = 0;
+ break;
+ default:
+ process = 0;
+ break;
+ }
+
+ if (process) {
+ if (cplb_data[i].attr & I_CPLB) {
+
+ if (cplb_data[i].psize) {
+ fill_cplbtab(t_i,
+ cplb_data[i].start,
+ cplb_data[i].end,
+ cplb_data[i].psize,
+ cplb_data[i].i_conf);
+ } else {
+ /*icplb_table */
+#if (defined(CONFIG_BLKFIN_CACHE) && defined(ANOMALY_05000263))
+ if (i == SDRAM_KERN) {
+ fill_cplbtab(t_i,
+ cplb_data[i].start,
+ cplb_data[i].end,
+ SIZE_4M,
+ cplb_data[i].i_conf);
+ } else
+#endif
+ {
+ fill_cplbtab(t_i,
+ cplb_data[i].start,
+ a_start,
+ SIZE_1M,
+ cplb_data[i].i_conf);
+ fill_cplbtab(t_i,
+ a_start,
+ a_end,
+ SIZE_4M,
+ cplb_data[i].i_conf);
+ fill_cplbtab(t_i, a_end,
+ cplb_data[i].end,
+ SIZE_1M,
+ cplb_data[i].i_conf);
+ }
+ }
+
+ }
+ if (cplb_data[i].attr & D_CPLB) {
+
+ if (cplb_data[i].psize) {
+ fill_cplbtab(t_d,
+ cplb_data[i].start,
+ cplb_data[i].end,
+ cplb_data[i].psize,
+ cplb_data[i].d_conf);
+ } else {
+/*dcplb_table*/
+ fill_cplbtab(t_d,
+ cplb_data[i].start,
+ a_start, SIZE_1M,
+ cplb_data[i].d_conf);
+ fill_cplbtab(t_d, a_start,
+ a_end, SIZE_4M,
+ cplb_data[i].d_conf);
+ fill_cplbtab(t_d, a_end,
+ cplb_data[i].end,
+ SIZE_1M,
+ cplb_data[i].d_conf);
+
+ }
+
+ }
+ }
+ }
+
+ }
+ }
+
+/* close tables */
+
+ close_cplbtab(&cplb.init_i);
+ close_cplbtab(&cplb.init_d);
+
+ cplb.init_i.tab[cplb.init_i.pos] = -1;
+ cplb.init_d.tab[cplb.init_d.pos] = -1;
+ cplb.switch_i.tab[cplb.switch_i.pos] = -1;
+ cplb.switch_d.tab[cplb.switch_d.pos] = -1;
+
+}
+
+#endif
+
+static inline u_long get_vco(void)
+{
+ u_long msel;
+ u_long vco;
+
+ msel = (bfin_read_PLL_CTL() >> 9) & 0x3F;
+ if (0 == msel)
+ msel = 64;
+
+ vco = CONFIG_CLKIN_HZ;
+ vco >>= (1 & bfin_read_PLL_CTL()); /* DF bit */
+ vco = msel * vco;
+ return vco;
+}
+
+/*Get the Core clock*/
+u_long get_cclk(void)
+{
+ u_long csel, ssel;
+ if (bfin_read_PLL_STAT() & 0x1)
+ return CONFIG_CLKIN_HZ;
+
+ ssel = bfin_read_PLL_DIV();
+ csel = ((ssel >> 4) & 0x03);
+ ssel &= 0xf;
+ if (ssel && ssel < (1 << csel)) /* SCLK > CCLK */
+ return get_vco() / ssel;
+ return get_vco() >> csel;
+}
+
+EXPORT_SYMBOL(get_cclk);
+
+/* Get the System clock */
+u_long get_sclk(void)
+{
+ u_long ssel;
+
+ if (bfin_read_PLL_STAT() & 0x1)
+ return CONFIG_CLKIN_HZ;
+
+ ssel = (bfin_read_PLL_DIV() & 0xf);
+ if (0 == ssel) {
+ printk(KERN_WARNING "Invalid System Clock\n");
+ ssel = 1;
+ }
+
+ return get_vco() / ssel;
+}
+
+EXPORT_SYMBOL(get_sclk);
+
+/*
+ * Get CPU information for use by the procfs.
+ */
+static int show_cpuinfo(struct seq_file *m, void *v)
+{
+ char *cpu, *mmu, *fpu, *name;
+ uint32_t revid;
+
+ u_long cclk = 0, sclk = 0;
+ u_int dcache_size = 0, dsup_banks = 0;
+
+ cpu = CPU;
+ mmu = "none";
+ fpu = "none";
+ revid = bfin_revid();
+ name = bfin_board_name;
+
+ cclk = get_cclk();
+ sclk = get_sclk();
+
+ seq_printf(m, "CPU:\t\tADSP-%s Rev. 0.%d\n"
+ "MMU:\t\t%s\n"
+ "FPU:\t\t%s\n"
+ "Core Clock:\t%9lu Hz\n"
+ "System Clock:\t%9lu Hz\n"
+ "BogoMips:\t%lu.%02lu\n"
+ "Calibration:\t%lu loops\n",
+ cpu, revid, mmu, fpu,
+ cclk,
+ sclk,
+ (loops_per_jiffy * HZ) / 500000,
+ ((loops_per_jiffy * HZ) / 5000) % 100,
+ (loops_per_jiffy * HZ));
+ seq_printf(m, "Board Name:\t%s\n", name);
+ seq_printf(m, "Board Memory:\t%ld MB\n", physical_mem_end >> 20);
+ seq_printf(m, "Kernel Memory:\t%ld MB\n", (unsigned long)_ramend >> 20);
+ if (bfin_read_IMEM_CONTROL() & (ENICPLB | IMC))
+ seq_printf(m, "I-CACHE:\tON\n");
+ else
+ seq_printf(m, "I-CACHE:\tOFF\n");
+ if ((bfin_read_DMEM_CONTROL()) & (ENDCPLB | DMC_ENABLE))
+ seq_printf(m, "D-CACHE:\tON"
+#if defined CONFIG_BLKFIN_WB
+ " (write-back)"
+#elif defined CONFIG_BLKFIN_WT
+ " (write-through)"
+#endif
+ "\n");
+ else
+ seq_printf(m, "D-CACHE:\tOFF\n");
+
+
+ switch(bfin_read_DMEM_CONTROL() & (1 << DMC0_P | 1 << DMC1_P)) {
+ case ACACHE_BSRAM:
+ seq_printf(m, "DBANK-A:\tCACHE\n" "DBANK-B:\tSRAM\n");
+ dcache_size = 16;
+ dsup_banks = 1;
+ break;
+ case ACACHE_BCACHE:
+ seq_printf(m, "DBANK-A:\tCACHE\n" "DBANK-B:\tCACHE\n");
+ dcache_size = 32;
+ dsup_banks = 2;
+ break;
+ case ASRAM_BSRAM:
+ seq_printf(m, "DBANK-A:\tSRAM\n" "DBANK-B:\tSRAM\n");
+ dcache_size = 0;
+ dsup_banks = 0;
+ break;
+ default:
+ break;
+ }
+
+
+ seq_printf(m, "I-CACHE Size:\t%dKB\n", BLKFIN_ICACHESIZE / 1024);
+ seq_printf(m, "D-CACHE Size:\t%dKB\n", dcache_size);
+ seq_printf(m, "I-CACHE Setup:\t%d Sub-banks/%d Ways, %d Lines/Way\n",
+ BLKFIN_ISUBBANKS, BLKFIN_IWAYS, BLKFIN_ILINES);
+ seq_printf(m,
+ "D-CACHE Setup:\t%d Super-banks/%d Sub-banks/%d Ways, %d Lines/Way\n",
+ dsup_banks, BLKFIN_DSUBBANKS, BLKFIN_DWAYS,
+ BLKFIN_DLINES);
+#ifdef CONFIG_BLKFIN_CACHE_LOCK
+ switch (read_iloc()) {
+ case WAY0_L:
+ seq_printf(m, "Way0 Locked-Down\n");
+ break;
+ case WAY1_L:
+ seq_printf(m, "Way1 Locked-Down\n");
+ break;
+ case WAY01_L:
+ seq_printf(m, "Way0,Way1 Locked-Down\n");
+ break;
+ case WAY2_L:
+ seq_printf(m, "Way2 Locked-Down\n");
+ break;
+ case WAY02_L:
+ seq_printf(m, "Way0,Way2 Locked-Down\n");
+ break;
+ case WAY12_L:
+ seq_printf(m, "Way1,Way2 Locked-Down\n");
+ break;
+ case WAY012_L:
+ seq_printf(m, "Way0,Way1 & Way2 Locked-Down\n");
+ break;
+ case WAY3_L:
+ seq_printf(m, "Way3 Locked-Down\n");
+ break;
+ case WAY03_L:
+ seq_printf(m, "Way0,Way3 Locked-Down\n");
+ break;
+ case WAY13_L:
+ seq_printf(m, "Way1,Way3 Locked-Down\n");
+ break;
+ case WAY013_L:
+ seq_printf(m, "Way 0,Way1,Way3 Locked-Down\n");
+ break;
+ case WAY32_L:
+ seq_printf(m, "Way3,Way2 Locked-Down\n");
+ break;
+ case WAY320_L:
+ seq_printf(m, "Way3,Way2,Way0 Locked-Down\n");
+ break;
+ case WAY321_L:
+ seq_printf(m, "Way3,Way2,Way1 Locked-Down\n");
+ break;
+ case WAYALL_L:
+ seq_printf(m, "All Ways are locked\n");
+ break;
+ default:
+ seq_printf(m, "No Ways are locked\n");
+ }
+#endif
+ return 0;
+}
+
+static void *c_start(struct seq_file *m, loff_t *pos)
+{
+ return *pos < NR_CPUS ? ((void *)0x12345678) : NULL;
+}
+
+static void *c_next(struct seq_file *m, void *v, loff_t *pos)
+{
+ ++*pos;
+ return c_start(m, pos);
+}
+
+static void c_stop(struct seq_file *m, void *v)
+{
+}
+
+struct seq_operations cpuinfo_op = {
+ .start = c_start,
+ .next = c_next,
+ .stop = c_stop,
+ .show = show_cpuinfo,
+};
+
+void cmdline_init(unsigned long r0)
+{
+ if (r0)
+ strncpy(command_line, (char *)r0, COMMAND_LINE_SIZE);
+}
diff --git a/arch/blackfin/kernel/signal.c b/arch/blackfin/kernel/signal.c
new file mode 100644
index 0000000..316e65c
--- /dev/null
+++ b/arch/blackfin/kernel/signal.c
@@ -0,0 +1,356 @@
+/*
+ * File: arch/blackfin/kernel/signal.c
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/signal.h>
+#include <linux/syscalls.h>
+#include <linux/ptrace.h>
+#include <linux/tty.h>
+#include <linux/personality.h>
+#include <linux/binfmts.h>
+#include <linux/freezer.h>
+
+#include <asm/uaccess.h>
+#include <asm/cacheflush.h>
+#include <asm/ucontext.h>
+
+#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
+
+struct fdpic_func_descriptor {
+ unsigned long text;
+ unsigned long GOT;
+};
+
+struct rt_sigframe {
+ int sig;
+ struct siginfo *pinfo;
+ void *puc;
+ char retcode[8];
+ struct siginfo info;
+ struct ucontext uc;
+};
+
+asmlinkage int sys_sigaltstack(const stack_t * uss, stack_t * uoss)
+{
+ return do_sigaltstack(uss, uoss, rdusp());
+}
+
+static inline int
+rt_restore_sigcontext(struct pt_regs *regs, struct sigcontext *sc, int *pr0)
+{
+ unsigned long usp = 0;
+ int err = 0;
+
+#define RESTORE(x) err |= __get_user(regs->x, &sc->sc_##x)
+
+ /* restore passed registers */
+ RESTORE(r0); RESTORE(r1); RESTORE(r2); RESTORE(r3);
+ RESTORE(r4); RESTORE(r5); RESTORE(r6); RESTORE(r7);
+ RESTORE(p0); RESTORE(p1); RESTORE(p2); RESTORE(p3);
+ RESTORE(p4); RESTORE(p5);
+ err |= __get_user(usp, &sc->sc_usp);
+ wrusp(usp);
+ RESTORE(a0w); RESTORE(a1w);
+ RESTORE(a0x); RESTORE(a1x);
+ RESTORE(astat);
+ RESTORE(rets);
+ RESTORE(pc);
+ RESTORE(retx);
+ RESTORE(fp);
+ RESTORE(i0); RESTORE(i1); RESTORE(i2); RESTORE(i3);
+ RESTORE(m0); RESTORE(m1); RESTORE(m2); RESTORE(m3);
+ RESTORE(l0); RESTORE(l1); RESTORE(l2); RESTORE(l3);
+ RESTORE(b0); RESTORE(b1); RESTORE(b2); RESTORE(b3);
+ RESTORE(lc0); RESTORE(lc1);
+ RESTORE(lt0); RESTORE(lt1);
+ RESTORE(lb0); RESTORE(lb1);
+ RESTORE(seqstat);
+
+ regs->orig_p0 = -1; /* disable syscall checks */
+
+ *pr0 = regs->r0;
+ return err;
+}
+
+asmlinkage int do_rt_sigreturn(unsigned long __unused)
+{
+ struct pt_regs *regs = (struct pt_regs *)__unused;
+ unsigned long usp = rdusp();
+ struct rt_sigframe *frame = (struct rt_sigframe *)(usp);
+ sigset_t set;
+ int r0;
+
+ if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
+ goto badframe;
+ if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set)))
+ goto badframe;
+
+ sigdelsetmask(&set, ~_BLOCKABLE);
+ spin_lock_irq(¤t->sighand->siglock);
+ current->blocked = set;
+ recalc_sigpending();
+ spin_unlock_irq(¤t->sighand->siglock);
+
+ if (rt_restore_sigcontext(regs, &frame->uc.uc_mcontext, &r0))
+ goto badframe;
+
+ if (do_sigaltstack(&frame->uc.uc_stack, NULL, regs->usp) == -EFAULT)
+ goto badframe;
+
+ return r0;
+
+ badframe:
+ force_sig(SIGSEGV, current);
+ return 0;
+}
+
+static inline int rt_setup_sigcontext(struct sigcontext *sc, struct pt_regs *regs)
+{
+ int err = 0;
+
+#define SETUP(x) err |= __put_user(regs->x, &sc->sc_##x)
+
+ SETUP(r0); SETUP(r1); SETUP(r2); SETUP(r3);
+ SETUP(r4); SETUP(r5); SETUP(r6); SETUP(r7);
+ SETUP(p0); SETUP(p1); SETUP(p2); SETUP(p3);
+ SETUP(p4); SETUP(p5);
+ err |= __put_user(rdusp(), &sc->sc_usp);
+ SETUP(a0w); SETUP(a1w);
+ SETUP(a0x); SETUP(a1x);
+ SETUP(astat);
+ SETUP(rets);
+ SETUP(pc);
+ SETUP(retx);
+ SETUP(fp);
+ SETUP(i0); SETUP(i1); SETUP(i2); SETUP(i3);
+ SETUP(m0); SETUP(m1); SETUP(m2); SETUP(m3);
+ SETUP(l0); SETUP(l1); SETUP(l2); SETUP(l3);
+ SETUP(b0); SETUP(b1); SETUP(b2); SETUP(b3);
+ SETUP(lc0); SETUP(lc1);
+ SETUP(lt0); SETUP(lt1);
+ SETUP(lb0); SETUP(lb1);
+ SETUP(seqstat);
+
+ return err;
+}
+
+static inline void push_cache(unsigned long vaddr, unsigned int len)
+{
+ flush_icache_range(vaddr, vaddr + len);
+}
+
+static inline void *get_sigframe(struct k_sigaction *ka, struct pt_regs *regs,
+ size_t frame_size)
+{
+ unsigned long usp;
+
+ /* Default to using normal stack. */
+ usp = rdusp();
+
+ /* This is the X/Open sanctioned signal stack switching. */
+ if (ka->sa.sa_flags & SA_ONSTACK) {
+ if (!on_sig_stack(usp))
+ usp = current->sas_ss_sp + current->sas_ss_size;
+ }
+ return (void *)((usp - frame_size) & -8UL);
+}
+
+static int
+setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t * info,
+ sigset_t * set, struct pt_regs *regs)
+{
+ struct rt_sigframe *frame;
+ int err = 0;
+
+ frame = get_sigframe(ka, regs, sizeof(*frame));
+
+ err |= __put_user((current_thread_info()->exec_domain
+ && current_thread_info()->exec_domain->signal_invmap
+ && sig < 32
+ ? current_thread_info()->exec_domain->
+ signal_invmap[sig] : sig), &frame->sig);
+
+ err |= __put_user(&frame->info, &frame->pinfo);
+ err |= __put_user(&frame->uc, &frame->puc);
+ err |= copy_siginfo_to_user(&frame->info, info);
+
+ /* Create the ucontext. */
+ err |= __put_user(0, &frame->uc.uc_flags);
+ err |= __put_user(0, &frame->uc.uc_link);
+ err |=
+ __put_user((void *)current->sas_ss_sp, &frame->uc.uc_stack.ss_sp);
+ err |= __put_user(sas_ss_flags(rdusp()), &frame->uc.uc_stack.ss_flags);
+ err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size);
+ err |= rt_setup_sigcontext(&frame->uc.uc_mcontext, regs);
+ err |= copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
+
+ /* Set up to return from userspace. */
+ err |= __put_user(0x28, &(frame->retcode[0]));
+ err |= __put_user(0xe1, &(frame->retcode[1]));
+ err |= __put_user(0xad, &(frame->retcode[2]));
+ err |= __put_user(0x00, &(frame->retcode[3]));
+ err |= __put_user(0xa0, &(frame->retcode[4]));
+ err |= __put_user(0x00, &(frame->retcode[5]));
+
+ if (err)
+ goto give_sigsegv;
+
+ push_cache((unsigned long)&frame->retcode, sizeof(frame->retcode));
+
+ /* Set up registers for signal handler */
+ wrusp((unsigned long)frame);
+ if (get_personality & FDPIC_FUNCPTRS) {
+ struct fdpic_func_descriptor __user *funcptr =
+ (struct fdpic_func_descriptor *) ka->sa.sa_handler;
+ __get_user(regs->pc, &funcptr->text);
+ __get_user(regs->p3, &funcptr->GOT);
+ } else
+ regs->pc = (unsigned long)ka->sa.sa_handler;
+ regs->rets = (unsigned long)(frame->retcode);
+
+ regs->r0 = frame->sig;
+ regs->r1 = (unsigned long)(&frame->info);
+ regs->r2 = (unsigned long)(&frame->uc);
+
+ return 0;
+
+ give_sigsegv:
+ if (sig == SIGSEGV)
+ ka->sa.sa_handler = SIG_DFL;
+ force_sig(SIGSEGV, current);
+ return -EFAULT;
+}
+
+static inline void
+handle_restart(struct pt_regs *regs, struct k_sigaction *ka, int has_handler)
+{
+ switch (regs->r0) {
+ case -ERESTARTNOHAND:
+ if (!has_handler)
+ goto do_restart;
+ regs->r0 = -EINTR;
+ break;
+
+ case -ERESTARTSYS:
+ if (has_handler && !(ka->sa.sa_flags & SA_RESTART)) {
+ regs->r0 = -EINTR;
+ break;
+ }
+ /* fallthrough */
+ case -ERESTARTNOINTR:
+ do_restart:
+ regs->p0 = regs->orig_p0;
+ regs->r0 = regs->orig_r0;
+ regs->pc -= 2;
+ break;
+ }
+}
+
+/*
+ * OK, we're invoking a handler
+ */
+static int
+handle_signal(int sig, siginfo_t *info, struct k_sigaction *ka,
+ sigset_t *oldset, struct pt_regs *regs)
+{
+ int ret;
+
+ /* are we from a system call? to see pt_regs->orig_p0 */
+ if (regs->orig_p0 >= 0)
+ /* If so, check system call restarting.. */
+ handle_restart(regs, ka, 1);
+
+ /* set up the stack frame */
+ ret = setup_rt_frame(sig, ka, info, oldset, regs);
+
+ if (ret == 0) {
+ spin_lock_irq(¤t->sighand->siglock);
+ sigorsets(¤t->blocked, ¤t->blocked,
+ &ka->sa.sa_mask);
+ if (!(ka->sa.sa_flags & SA_NODEFER))
+ sigaddset(¤t->blocked, sig);
+ recalc_sigpending();
+ spin_unlock_irq(¤t->sighand->siglock);
+ }
+ return ret;
+}
+
+/*
+ * Note that 'init' is a special process: it doesn't get signals it doesn't
+ * want to handle. Thus you cannot kill init even with a SIGKILL even by
+ * mistake.
+ *
+ * Note that we go through the signals twice: once to check the signals
+ * that the kernel can handle, and then we build all the user-level signal
+ * handling stack-frames in one go after that.
+ */
+asmlinkage void do_signal(struct pt_regs *regs)
+{
+ siginfo_t info;
+ int signr;
+ struct k_sigaction ka;
+ sigset_t *oldset;
+
+ current->thread.esp0 = (unsigned long)regs;
+
+ if (try_to_freeze())
+ goto no_signal;
+
+ if (test_thread_flag(TIF_RESTORE_SIGMASK))
+ oldset = ¤t->saved_sigmask;
+ else
+ oldset = ¤t->blocked;
+
+ signr = get_signal_to_deliver(&info, &ka, regs, NULL);
+ if (signr > 0) {
+ /* Whee! Actually deliver the signal. */
+ if (handle_signal(signr, &info, &ka, oldset, regs) == 0) {
+ /* a signal was successfully delivered; the saved
+ * sigmask will have been stored in the signal frame,
+ * and will be restored by sigreturn, so we can simply
+ * clear the TIF_RESTORE_SIGMASK flag */
+ if (test_thread_flag(TIF_RESTORE_SIGMASK))
+ clear_thread_flag(TIF_RESTORE_SIGMASK);
+ }
+
+ return;
+ }
+
+no_signal:
+ /* Did we come from a system call? */
+ if (regs->orig_p0 >= 0)
+ /* Restart the system call - no handlers present */
+ handle_restart(regs, NULL, 0);
+
+ /* if there's no signal to deliver, we just put the saved sigmask
+ * back */
+ if (test_thread_flag(TIF_RESTORE_SIGMASK)) {
+ clear_thread_flag(TIF_RESTORE_SIGMASK);
+ sigprocmask(SIG_SETMASK, ¤t->saved_sigmask, NULL);
+ }
+}
diff --git a/arch/blackfin/kernel/sys_bfin.c b/arch/blackfin/kernel/sys_bfin.c
new file mode 100644
index 0000000..f436e67
--- /dev/null
+++ b/arch/blackfin/kernel/sys_bfin.c
@@ -0,0 +1,115 @@
+/*
+ * File: arch/blackfin/kernel/sys_bfin.c
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description: This file contains various random system calls that
+ * have a non-standard calling sequence on the Linux/bfin
+ * platform.
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/smp_lock.h>
+#include <linux/spinlock.h>
+#include <linux/sem.h>
+#include <linux/msg.h>
+#include <linux/shm.h>
+#include <linux/syscalls.h>
+#include <linux/mman.h>
+#include <linux/file.h>
+
+#include <asm/cacheflush.h>
+#include <asm/uaccess.h>
+#include <asm/ipc.h>
+#include <asm/dma.h>
+#include <asm/unistd.h>
+
+/*
+ * sys_pipe() is the normal C calling standard for creating
+ * a pipe. It's not the way unix traditionally does this, though.
+ */
+asmlinkage int sys_pipe(unsigned long *fildes)
+{
+ int fd[2];
+ int error;
+
+ error = do_pipe(fd);
+ if (!error) {
+ if (copy_to_user(fildes, fd, 2 * sizeof(int)))
+ error = -EFAULT;
+ }
+ return error;
+}
+
+/* common code for old and new mmaps */
+static inline long
+do_mmap2(unsigned long addr, unsigned long len,
+ unsigned long prot, unsigned long flags,
+ unsigned long fd, unsigned long pgoff)
+{
+ int error = -EBADF;
+ struct file *file = NULL;
+
+ flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
+ if (!(flags & MAP_ANONYMOUS)) {
+ file = fget(fd);
+ if (!file)
+ goto out;
+ }
+
+ down_write(¤t->mm->mmap_sem);
+ error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff);
+ up_write(¤t->mm->mmap_sem);
+
+ if (file)
+ fput(file);
+ out:
+ return error;
+}
+
+asmlinkage long sys_mmap2(unsigned long addr, unsigned long len,
+ unsigned long prot, unsigned long flags,
+ unsigned long fd, unsigned long pgoff)
+{
+ return do_mmap2(addr, len, prot, flags, fd, pgoff);
+}
+
+asmlinkage int sys_getpagesize(void)
+{
+ return PAGE_SIZE;
+}
+
+asmlinkage void *sys_sram_alloc(size_t size, unsigned long flags)
+{
+ return sram_alloc_with_lsl(size, flags);
+}
+
+asmlinkage int sys_sram_free(const void *addr)
+{
+ return sram_free_with_lsl(addr);
+}
+
+asmlinkage void *sys_dma_memcpy(void *dest, const void *src, size_t len)
+{
+ return safe_dma_memcpy(dest, src, len);
+}
diff --git a/arch/blackfin/kernel/time.c b/arch/blackfin/kernel/time.c
new file mode 100644
index 0000000..f578176
--- /dev/null
+++ b/arch/blackfin/kernel/time.c
@@ -0,0 +1,326 @@
+/*
+ * File: arch/blackfin/kernel/time.c
+ * Based on: none - original work
+ * Author:
+ *
+ * Created:
+ * Description: This file contains the bfin-specific time handling details.
+ * Most of the stuff is located in the machine specific files.
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/module.h>
+#include <linux/profile.h>
+#include <linux/interrupt.h>
+#include <linux/time.h>
+#include <linux/irq.h>
+
+#include <asm/blackfin.h>
+
+/* This is an NTP setting */
+#define TICK_SIZE (tick_nsec / 1000)
+
+static void time_sched_init(irqreturn_t(*timer_routine)
+ (int, void *));
+static unsigned long gettimeoffset(void);
+static inline void do_leds(void);
+
+#if (defined(CONFIG_BFIN_ALIVE_LED) || defined(CONFIG_BFIN_IDLE_LED))
+void __init init_leds(void)
+{
+ unsigned int tmp = 0;
+
+#if defined(CONFIG_BFIN_ALIVE_LED)
+ /* config pins as output. */
+ tmp = bfin_read_CONFIG_BFIN_ALIVE_LED_DPORT();
+ SSYNC();
+ bfin_write_CONFIG_BFIN_ALIVE_LED_DPORT(tmp | CONFIG_BFIN_ALIVE_LED_PIN);
+ SSYNC();
+
+ /* First set led be off */
+ tmp = bfin_read_CONFIG_BFIN_ALIVE_LED_PORT();
+ SSYNC();
+ bfin_write_CONFIG_BFIN_ALIVE_LED_PORT(tmp | CONFIG_BFIN_ALIVE_LED_PIN); /* light off */
+ SSYNC();
+#endif
+
+#if defined(CONFIG_BFIN_IDLE_LED)
+ /* config pins as output. */
+ tmp = bfin_read_CONFIG_BFIN_IDLE_LED_DPORT();
+ SSYNC();
+ bfin_write_CONFIG_BFIN_IDLE_LED_DPORT(tmp | CONFIG_BFIN_IDLE_LED_PIN);
+ SSYNC();
+
+ /* First set led be off */
+ tmp = bfin_read_CONFIG_BFIN_IDLE_LED_PORT();
+ SSYNC();
+ bfin_write_CONFIG_BFIN_IDLE_LED_PORT(tmp | CONFIG_BFIN_IDLE_LED_PIN); /* light off */
+ SSYNC();
+#endif
+}
+#else
+void __init init_leds(void)
+{
+}
+#endif
+
+#if defined(CONFIG_BFIN_ALIVE_LED)
+static inline void do_leds(void)
+{
+ static unsigned int count = 50;
+ static int flag = 0;
+ unsigned short tmp = 0;
+
+ if (--count == 0) {
+ count = 50;
+ flag = ~flag;
+ }
+ tmp = bfin_read_CONFIG_BFIN_ALIVE_LED_PORT();
+ SSYNC();
+
+ if (flag)
+ tmp &= ~CONFIG_BFIN_ALIVE_LED_PIN; /* light on */
+ else
+ tmp |= CONFIG_BFIN_ALIVE_LED_PIN; /* light off */
+
+ bfin_write_CONFIG_BFIN_ALIVE_LED_PORT(tmp);
+ SSYNC();
+
+}
+#else
+static inline void do_leds(void)
+{
+}
+#endif
+
+static struct irqaction bfin_timer_irq = {
+ .name = "BFIN Timer Tick",
+ .flags = IRQF_DISABLED
+};
+
+/*
+ * The way that the Blackfin core timer works is:
+ * - CCLK is divided by a programmable 8-bit pre-scaler (TSCALE)
+ * - Every time TSCALE ticks, a 32bit is counted down (TCOUNT)
+ *
+ * If you take the fastest clock (1ns, or 1GHz to make the math work easier)
+ * 10ms is 10,000,000 clock ticks, which fits easy into a 32-bit counter
+ * (32 bit counter is 4,294,967,296ns or 4.2 seconds) so, we don't need
+ * to use TSCALE, and program it to zero (which is pass CCLK through).
+ * If you feel like using it, try to keep HZ * TIMESCALE to some
+ * value that divides easy (like power of 2).
+ */
+
+#define TIME_SCALE 1
+
+static void
+time_sched_init(irqreturn_t(*timer_routine) (int, void *))
+{
+ u32 tcount;
+
+ /* power up the timer, but don't enable it just yet */
+ bfin_write_TCNTL(1);
+ CSYNC();
+
+ /*
+ * the TSCALE prescaler counter.
+ */
+ bfin_write_TSCALE((TIME_SCALE - 1));
+
+ tcount = ((get_cclk() / (HZ * TIME_SCALE)) - 1);
+ bfin_write_TPERIOD(tcount);
+ bfin_write_TCOUNT(tcount);
+
+ /* now enable the timer */
+ CSYNC();
+
+ bfin_write_TCNTL(7);
+
+ bfin_timer_irq.handler = (irq_handler_t)timer_routine;
+ /* call setup_irq instead of request_irq because request_irq calls
+ * kmalloc which has not been initialized yet
+ */
+ setup_irq(IRQ_CORETMR, &bfin_timer_irq);
+}
+
+/*
+ * Should return useconds since last timer tick
+ */
+static unsigned long gettimeoffset(void)
+{
+ unsigned long offset;
+ unsigned long clocks_per_jiffy;
+
+ clocks_per_jiffy = bfin_read_TPERIOD();
+ offset =
+ (clocks_per_jiffy -
+ bfin_read_TCOUNT()) / (((clocks_per_jiffy + 1) * HZ) /
+ USEC_PER_SEC);
+
+ /* Check if we just wrapped the counters and maybe missed a tick */
+ if ((bfin_read_ILAT() & (1 << IRQ_CORETMR))
+ && (offset < (100000 / HZ / 2)))
+ offset += (USEC_PER_SEC / HZ);
+
+ return offset;
+}
+
+static inline int set_rtc_mmss(unsigned long nowtime)
+{
+ return 0;
+}
+
+/*
+ * timer_interrupt() needs to keep up the real-time clock,
+ * as well as call the "do_timer()" routine every clocktick
+ */
+#ifdef CONFIG_CORE_TIMER_IRQ_L1
+irqreturn_t timer_interrupt(int irq, void *dummy)__attribute__((l1_text));
+#endif
+
+irqreturn_t timer_interrupt(int irq, void *dummy)
+{
+ /* last time the cmos clock got updated */
+ static long last_rtc_update = 0;
+
+ write_seqlock(&xtime_lock);
+
+ do_timer(1);
+ do_leds();
+
+#ifndef CONFIG_SMP
+ update_process_times(user_mode(get_irq_regs()));
+#endif
+ profile_tick(CPU_PROFILING);
+
+ /*
+ * If we have an externally synchronized Linux clock, then update
+ * CMOS clock accordingly every ~11 minutes. Set_rtc_mmss() has to be
+ * called as close as possible to 500 ms before the new second starts.
+ */
+
+ if (ntp_synced() &&
+ xtime.tv_sec > last_rtc_update + 660 &&
+ (xtime.tv_nsec / NSEC_PER_USEC) >=
+ 500000 - ((unsigned)TICK_SIZE) / 2
+ && (xtime.tv_nsec / NSEC_PER_USEC) <=
+ 500000 + ((unsigned)TICK_SIZE) / 2) {
+ if (set_rtc_mmss(xtime.tv_sec) == 0)
+ last_rtc_update = xtime.tv_sec;
+ else
+ /* Do it again in 60s. */
+ last_rtc_update = xtime.tv_sec - 600;
+ }
+ write_sequnlock(&xtime_lock);
+ return IRQ_HANDLED;
+}
+
+void __init time_init(void)
+{
+ time_t secs_since_1970 = (365 * 37 + 9) * 24 * 60 * 60; /* 1 Jan 2007 */
+
+#ifdef CONFIG_RTC_DRV_BFIN
+ /* [#2663] hack to filter junk RTC values that would cause
+ * userspace to have to deal with time values greater than
+ * 2^31 seconds (which uClibc cannot cope with yet)
+ */
+ if ((bfin_read_RTC_STAT() & 0xC0000000) == 0xC0000000) {
+ printk(KERN_NOTICE "bfin-rtc: invalid date; resetting\n");
+ bfin_write_RTC_STAT(0);
+ }
+#endif
+
+ /* Initialize xtime. From now on, xtime is updated with timer interrupts */
+ xtime.tv_sec = secs_since_1970;
+ xtime.tv_nsec = 0;
+
+ wall_to_monotonic.tv_sec = -xtime.tv_sec;
+
+ time_sched_init(timer_interrupt);
+}
+
+#ifndef CONFIG_GENERIC_TIME
+void do_gettimeofday(struct timeval *tv)
+{
+ unsigned long flags;
+ unsigned long seq;
+ unsigned long usec, sec;
+
+ do {
+ seq = read_seqbegin_irqsave(&xtime_lock, flags);
+ usec = gettimeoffset();
+ sec = xtime.tv_sec;
+ usec += (xtime.tv_nsec / NSEC_PER_USEC);
+ }
+ while (read_seqretry_irqrestore(&xtime_lock, seq, flags));
+
+ while (usec >= USEC_PER_SEC) {
+ usec -= USEC_PER_SEC;
+ sec++;
+ }
+
+ tv->tv_sec = sec;
+ tv->tv_usec = usec;
+}
+EXPORT_SYMBOL(do_gettimeofday);
+
+int do_settimeofday(struct timespec *tv)
+{
+ time_t wtm_sec, sec = tv->tv_sec;
+ long wtm_nsec, nsec = tv->tv_nsec;
+
+ if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC)
+ return -EINVAL;
+
+ write_seqlock_irq(&xtime_lock);
+ /*
+ * This is revolting. We need to set the xtime.tv_usec
+ * correctly. However, the value in this location is
+ * is value at the last tick.
+ * Discover what correction gettimeofday
+ * would have done, and then undo it!
+ */
+ nsec -= (gettimeoffset() * NSEC_PER_USEC);
+
+ wtm_sec = wall_to_monotonic.tv_sec + (xtime.tv_sec - sec);
+ wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - nsec);
+
+ set_normalized_timespec(&xtime, sec, nsec);
+ set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);
+
+ ntp_clear();
+
+ write_sequnlock_irq(&xtime_lock);
+ clock_was_set();
+
+ return 0;
+}
+EXPORT_SYMBOL(do_settimeofday);
+#endif /* !CONFIG_GENERIC_TIME */
+
+/*
+ * Scheduler clock - returns current time in nanosec units.
+ */
+unsigned long long sched_clock(void)
+{
+ return (unsigned long long)jiffies *(NSEC_PER_SEC / HZ);
+}
diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c
new file mode 100644
index 0000000..9556b73
--- /dev/null
+++ b/arch/blackfin/kernel/traps.c
@@ -0,0 +1,649 @@
+/*
+ * File: arch/blackfin/kernel/traps.c
+ * Based on:
+ * Author: Hamish Macdonald
+ *
+ * Created:
+ * Description: uses S/W interrupt 15 for the system calls
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <asm/uaccess.h>
+#include <asm/traps.h>
+#include <asm/cacheflush.h>
+#include <asm/blackfin.h>
+#include <asm/uaccess.h>
+#include <asm/irq_handler.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/kallsyms.h>
+
+#ifdef CONFIG_KGDB
+# include <linux/debugger.h>
+# include <linux/kgdb.h>
+#endif
+
+/* Initiate the event table handler */
+void __init trap_init(void)
+{
+ CSYNC();
+ bfin_write_EVT3(trap);
+ CSYNC();
+}
+
+asmlinkage void trap_c(struct pt_regs *fp);
+
+int kstack_depth_to_print = 48;
+
+static int printk_address(unsigned long address)
+{
+ struct vm_list_struct *vml;
+ struct task_struct *p;
+ struct mm_struct *mm;
+
+#ifdef CONFIG_KALLSYMS
+ unsigned long offset = 0, symsize;
+ const char *symname;
+ char *modname;
+ char *delim = ":";
+ char namebuf[128];
+
+ /* look up the address and see if we are in kernel space */
+ symname = kallsyms_lookup(address, &symsize, &offset, &modname, namebuf);
+
+ if (symname) {
+ /* yeah! kernel space! */
+ if (!modname)
+ modname = delim = "";
+ return printk("<0x%p> { %s%s%s%s + 0x%lx }",
+ (void*)address, delim, modname, delim, symname,
+ (unsigned long)offset);
+
+ }
+#endif
+
+ /* looks like we're off in user-land, so let's walk all the
+ * mappings of all our processes and see if we can't be a whee
+ * bit more specific
+ */
+ write_lock_irq(&tasklist_lock);
+ for_each_process(p) {
+ mm = get_task_mm(p);
+ if (!mm)
+ continue;
+
+ vml = mm->context.vmlist;
+ while (vml) {
+ struct vm_area_struct *vma = vml->vma;
+
+ if (address >= vma->vm_start && address < vma->vm_end) {
+ char *name = p->comm;
+ struct file *file = vma->vm_file;
+ if (file) {
+ char _tmpbuf[256];
+ name = d_path(file->f_dentry,
+ file->f_vfsmnt,
+ _tmpbuf,
+ sizeof(_tmpbuf));
+ }
+
+ write_unlock_irq(&tasklist_lock);
+ return printk("<0x%p> [ %s + 0x%lx ]",
+ (void*)address, name,
+ (unsigned long)
+ ((address - vma->vm_start) +
+ (vma->vm_pgoff << PAGE_SHIFT)));
+ }
+
+ vml = vml->next;
+ }
+ }
+ write_unlock_irq(&tasklist_lock);
+
+ /* we were unable to find this address anywhere */
+ return printk("[<0x%p>]", (void*)address);
+}
+
+#define trace_buffer_save(x) \
+ do { \
+ (x) = bfin_read_TBUFCTL(); \
+ bfin_write_TBUFCTL((x) & ~TBUFEN); \
+ } while (0)
+#define trace_buffer_restore(x) \
+ do { \
+ bfin_write_TBUFCTL((x)); \
+ } while (0)
+
+asmlinkage void trap_c(struct pt_regs *fp)
+{
+ int j, sig = 0;
+ siginfo_t info;
+ unsigned long trapnr = fp->seqstat & SEQSTAT_EXCAUSE;
+
+#ifdef CONFIG_KGDB
+# define CHK_DEBUGGER_TRAP() do { CHK_DEBUGGER(trapnr, sig, info.si_code, fp,); } while (0)
+# define CHK_DEBUGGER_TRAP_MAYBE() do { if (kgdb_connected) CHK_DEBUGGER_TRAP(); } while (0)
+#else
+# define CHK_DEBUGGER_TRAP() do { } while (0)
+# define CHK_DEBUGGER_TRAP_MAYBE() do { } while (0)
+#endif
+
+ trace_buffer_save(j);
+
+ /* trap_c() will be called for exceptions. During exceptions
+ * processing, the pc value should be set with retx value.
+ * With this change we can cleanup some code in signal.c- TODO
+ */
+ fp->orig_pc = fp->retx;
+ /* printk("exception: 0x%x, ipend=%x, reti=%x, retx=%x\n",
+ trapnr, fp->ipend, fp->pc, fp->retx); */
+
+ /* send the appropriate signal to the user program */
+ switch (trapnr) {
+
+ /* This table works in conjuction with the one in ./mach-common/entry.S
+ * Some exceptions are handled there (in assembly, in exception space)
+ * Some are handled here, (in C, in interrupt space)
+ * Some, like CPLB, are handled in both, where the normal path is
+ * handled in assembly/exception space, and the error path is handled
+ * here
+ */
+
+ /* 0x00 - Linux Syscall, getting here is an error */
+ /* 0x01 - userspace gdb breakpoint, handled here */
+ case VEC_EXCPT01:
+ info.si_code = TRAP_ILLTRAP;
+ sig = SIGTRAP;
+ CHK_DEBUGGER_TRAP_MAYBE();
+ /* Check if this is a breakpoint in kernel space */
+ if (fp->ipend & 0xffc0)
+ return;
+ else
+ break;
+#ifdef CONFIG_KGDB
+ case VEC_EXCPT02 : /* gdb connection */
+ info.si_code = TRAP_ILLTRAP;
+ sig = SIGTRAP;
+ CHK_DEBUGGER_TRAP();
+ return;
+#else
+ /* 0x02 - User Defined, Caught by default */
+#endif
+ /* 0x03 - Atomic test and set */
+ case VEC_EXCPT03:
+ info.si_code = SEGV_STACKFLOW;
+ sig = SIGSEGV;
+ printk(KERN_EMERG EXC_0x03);
+ CHK_DEBUGGER_TRAP();
+ break;
+ /* 0x04 - spinlock - handled by _ex_spinlock,
+ getting here is an error */
+ /* 0x05 - User Defined, Caught by default */
+ /* 0x06 - User Defined, Caught by default */
+ /* 0x07 - User Defined, Caught by default */
+ /* 0x08 - User Defined, Caught by default */
+ /* 0x09 - User Defined, Caught by default */
+ /* 0x0A - User Defined, Caught by default */
+ /* 0x0B - User Defined, Caught by default */
+ /* 0x0C - User Defined, Caught by default */
+ /* 0x0D - User Defined, Caught by default */
+ /* 0x0E - User Defined, Caught by default */
+ /* 0x0F - User Defined, Caught by default */
+ /* 0x10 HW Single step, handled here */
+ case VEC_STEP:
+ info.si_code = TRAP_STEP;
+ sig = SIGTRAP;
+ CHK_DEBUGGER_TRAP_MAYBE();
+ /* Check if this is a single step in kernel space */
+ if (fp->ipend & 0xffc0)
+ return;
+ else
+ break;
+ /* 0x11 - Trace Buffer Full, handled here */
+ case VEC_OVFLOW:
+ info.si_code = TRAP_TRACEFLOW;
+ sig = SIGTRAP;
+ printk(KERN_EMERG EXC_0x11);
+ CHK_DEBUGGER_TRAP();
+ break;
+ /* 0x12 - Reserved, Caught by default */
+ /* 0x13 - Reserved, Caught by default */
+ /* 0x14 - Reserved, Caught by default */
+ /* 0x15 - Reserved, Caught by default */
+ /* 0x16 - Reserved, Caught by default */
+ /* 0x17 - Reserved, Caught by default */
+ /* 0x18 - Reserved, Caught by default */
+ /* 0x19 - Reserved, Caught by default */
+ /* 0x1A - Reserved, Caught by default */
+ /* 0x1B - Reserved, Caught by default */
+ /* 0x1C - Reserved, Caught by default */
+ /* 0x1D - Reserved, Caught by default */
+ /* 0x1E - Reserved, Caught by default */
+ /* 0x1F - Reserved, Caught by default */
+ /* 0x20 - Reserved, Caught by default */
+ /* 0x21 - Undefined Instruction, handled here */
+ case VEC_UNDEF_I:
+ info.si_code = ILL_ILLOPC;
+ sig = SIGILL;
+ printk(KERN_EMERG EXC_0x21);
+ CHK_DEBUGGER_TRAP();
+ break;
+ /* 0x22 - Illegal Instruction Combination, handled here */
+ case VEC_ILGAL_I:
+ info.si_code = ILL_ILLPARAOP;
+ sig = SIGILL;
+ printk(KERN_EMERG EXC_0x22);
+ CHK_DEBUGGER_TRAP();
+ break;
+ /* 0x23 - Data CPLB Protection Violation,
+ normal case is handled in _cplb_hdr */
+ case VEC_CPLB_VL:
+ info.si_code = ILL_CPLB_VI;
+ sig = SIGILL;
+ printk(KERN_EMERG EXC_0x23);
+ CHK_DEBUGGER_TRAP();
+ break;
+ /* 0x24 - Data access misaligned, handled here */
+ case VEC_MISALI_D:
+ info.si_code = BUS_ADRALN;
+ sig = SIGBUS;
+ printk(KERN_EMERG EXC_0x24);
+ CHK_DEBUGGER_TRAP();
+ break;
+ /* 0x25 - Unrecoverable Event, handled here */
+ case VEC_UNCOV:
+ info.si_code = ILL_ILLEXCPT;
+ sig = SIGILL;
+ printk(KERN_EMERG EXC_0x25);
+ CHK_DEBUGGER_TRAP();
+ break;
+ /* 0x26 - Data CPLB Miss, normal case is handled in _cplb_hdr,
+ error case is handled here */
+ case VEC_CPLB_M:
+ info.si_code = BUS_ADRALN;
+ sig = SIGBUS;
+ printk(KERN_EMERG EXC_0x26);
+ CHK_DEBUGGER_TRAP();
+ break;
+ /* 0x27 - Data CPLB Multiple Hits - Linux Trap Zero, handled here */
+ case VEC_CPLB_MHIT:
+ info.si_code = ILL_CPLB_MULHIT;
+#ifdef CONFIG_DEBUG_HUNT_FOR_ZERO
+ sig = SIGSEGV;
+ printk(KERN_EMERG "\n\nNULL pointer access (probably)\n");
+#else
+ sig = SIGILL;
+ printk(KERN_EMERG EXC_0x27);
+#endif
+ CHK_DEBUGGER_TRAP();
+ break;
+ /* 0x28 - Emulation Watchpoint, handled here */
+ case VEC_WATCH:
+ info.si_code = TRAP_WATCHPT;
+ sig = SIGTRAP;
+ pr_debug(EXC_0x28);
+ CHK_DEBUGGER_TRAP_MAYBE();
+ /* Check if this is a watchpoint in kernel space */
+ if (fp->ipend & 0xffc0)
+ return;
+ else
+ break;
+#ifdef CONFIG_BF535
+ /* 0x29 - Instruction fetch access error (535 only) */
+ case VEC_ISTRU_VL: /* ADSP-BF535 only (MH) */
+ info.si_code = BUS_OPFETCH;
+ sig = SIGBUS;
+ printk(KERN_EMERG "BF535: VEC_ISTRU_VL\n");
+ CHK_DEBUGGER_TRAP();
+ break;
+#else
+ /* 0x29 - Reserved, Caught by default */
+#endif
+ /* 0x2A - Instruction fetch misaligned, handled here */
+ case VEC_MISALI_I:
+ info.si_code = BUS_ADRALN;
+ sig = SIGBUS;
+ printk(KERN_EMERG EXC_0x2A);
+ CHK_DEBUGGER_TRAP();
+ break;
+ /* 0x2B - Instruction CPLB protection Violation,
+ handled in _cplb_hdr */
+ case VEC_CPLB_I_VL:
+ info.si_code = ILL_CPLB_VI;
+ sig = SIGILL;
+ printk(KERN_EMERG EXC_0x2B);
+ CHK_DEBUGGER_TRAP();
+ break;
+ /* 0x2C - Instruction CPLB miss, handled in _cplb_hdr */
+ case VEC_CPLB_I_M:
+ info.si_code = ILL_CPLB_MISS;
+ sig = SIGBUS;
+ printk(KERN_EMERG EXC_0x2C);
+ CHK_DEBUGGER_TRAP();
+ break;
+ /* 0x2D - Instruction CPLB Multiple Hits, handled here */
+ case VEC_CPLB_I_MHIT:
+ info.si_code = ILL_CPLB_MULHIT;
+#ifdef CONFIG_DEBUG_HUNT_FOR_ZERO
+ sig = SIGSEGV;
+ printk(KERN_EMERG "\n\nJump to address 0 - 0x0fff\n");
+#else
+ sig = SIGILL;
+ printk(KERN_EMERG EXC_0x2D);
+#endif
+ CHK_DEBUGGER_TRAP();
+ break;
+ /* 0x2E - Illegal use of Supervisor Resource, handled here */
+ case VEC_ILL_RES:
+ info.si_code = ILL_PRVOPC;
+ sig = SIGILL;
+ printk(KERN_EMERG EXC_0x2E);
+ CHK_DEBUGGER_TRAP();
+ break;
+ /* 0x2F - Reserved, Caught by default */
+ /* 0x30 - Reserved, Caught by default */
+ /* 0x31 - Reserved, Caught by default */
+ /* 0x32 - Reserved, Caught by default */
+ /* 0x33 - Reserved, Caught by default */
+ /* 0x34 - Reserved, Caught by default */
+ /* 0x35 - Reserved, Caught by default */
+ /* 0x36 - Reserved, Caught by default */
+ /* 0x37 - Reserved, Caught by default */
+ /* 0x38 - Reserved, Caught by default */
+ /* 0x39 - Reserved, Caught by default */
+ /* 0x3A - Reserved, Caught by default */
+ /* 0x3B - Reserved, Caught by default */
+ /* 0x3C - Reserved, Caught by default */
+ /* 0x3D - Reserved, Caught by default */
+ /* 0x3E - Reserved, Caught by default */
+ /* 0x3F - Reserved, Caught by default */
+ default:
+ info.si_code = TRAP_ILLTRAP;
+ sig = SIGTRAP;
+ printk(KERN_EMERG "Caught Unhandled Exception, code = %08lx\n",
+ (fp->seqstat & SEQSTAT_EXCAUSE));
+ CHK_DEBUGGER_TRAP();
+ break;
+ }
+
+ info.si_signo = sig;
+ info.si_errno = 0;
+ info.si_addr = (void *)fp->pc;
+ force_sig_info(sig, &info, current);
+ if (sig != 0 && sig != SIGTRAP) {
+ unsigned long stack;
+ dump_bfin_regs(fp, (void *)fp->retx);
+ dump_bfin_trace_buffer();
+ show_stack(current, &stack);
+ if (current->mm == NULL)
+ panic("Kernel exception");
+ }
+
+ /* if the address that we are about to return to is not valid, set it
+ * to a valid address, if we have a current application or panic
+ */
+ if (!(fp->pc <= physical_mem_end
+#if L1_CODE_LENGTH != 0
+ || (fp->pc >= L1_CODE_START &&
+ fp->pc <= (L1_CODE_START + L1_CODE_LENGTH))
+#endif
+ )) {
+ if (current->mm) {
+ fp->pc = current->mm->start_code;
+ } else {
+ printk(KERN_EMERG "I can't return to memory that doesn't exist - bad things happen\n");
+ panic("Help - I've fallen and can't get up\n");
+ }
+ }
+
+ trace_buffer_restore(j);
+ return;
+}
+
+/* Typical exception handling routines */
+
+void dump_bfin_trace_buffer(void)
+{
+ int tflags;
+ trace_buffer_save(tflags);
+
+ if (likely(bfin_read_TBUFSTAT() & TBUFCNT)) {
+ int i;
+ printk(KERN_EMERG "Hardware Trace:\n");
+ for (i = 0; bfin_read_TBUFSTAT() & TBUFCNT; i++) {
+ printk(KERN_EMERG "%2i Target : ", i);
+ printk_address((unsigned long)bfin_read_TBUF());
+ printk("\n" KERN_EMERG " Source : ");
+ printk_address((unsigned long)bfin_read_TBUF());
+ printk("\n");
+ }
+ }
+
+ trace_buffer_restore(tflags);
+}
+EXPORT_SYMBOL(dump_bfin_trace_buffer);
+
+static void show_trace(struct task_struct *tsk, unsigned long *sp)
+{
+ unsigned long addr;
+
+ printk("\nCall Trace:");
+#ifdef CONFIG_KALLSYMS
+ printk("\n");
+#endif
+
+ while (!kstack_end(sp)) {
+ addr = *sp++;
+ /*
+ * If the address is either in the text segment of the
+ * kernel, or in the region which contains vmalloc'ed
+ * memory, it *may* be the address of a calling
+ * routine; if so, print it so that someone tracing
+ * down the cause of the crash will be able to figure
+ * out the call path that was taken.
+ */
+ if (kernel_text_address(addr))
+ print_ip_sym(addr);
+ }
+
+ printk("\n");
+}
+
+void show_stack(struct task_struct *task, unsigned long *stack)
+{
+ unsigned long *endstack, addr;
+ int i;
+
+ /* Cannot call dump_bfin_trace_buffer() here as show_stack() is
+ * called externally in some places in the kernel.
+ */
+
+ if (!stack) {
+ if (task)
+ stack = (unsigned long *)task->thread.ksp;
+ else
+ stack = (unsigned long *)&stack;
+ }
+
+ addr = (unsigned long)stack;
+ endstack = (unsigned long *)PAGE_ALIGN(addr);
+
+ printk(KERN_EMERG "Stack from %08lx:", (unsigned long)stack);
+ for (i = 0; i < kstack_depth_to_print; i++) {
+ if (stack + 1 > endstack)
+ break;
+ if (i % 8 == 0)
+ printk("\n" KERN_EMERG " ");
+ printk(" %08lx", *stack++);
+ }
+
+ show_trace(task, stack);
+}
+
+void dump_stack(void)
+{
+ unsigned long stack;
+ int tflags;
+ trace_buffer_save(tflags);
+ dump_bfin_trace_buffer();
+ show_stack(current, &stack);
+ trace_buffer_restore(tflags);
+}
+
+EXPORT_SYMBOL(dump_stack);
+
+void dump_bfin_regs(struct pt_regs *fp, void *retaddr)
+{
+ if (current->pid) {
+ printk("\nCURRENT PROCESS:\n\n");
+ printk("COMM=%s PID=%d\n", current->comm, current->pid);
+ } else {
+ printk
+ ("\nNo Valid pid - Either things are really messed up, or you are in the kernel\n");
+ }
+
+ if (current->mm) {
+ printk("TEXT = 0x%p-0x%p DATA = 0x%p-0x%p\n"
+ "BSS = 0x%p-0x%p USER-STACK = 0x%p\n\n",
+ (void*)current->mm->start_code,
+ (void*)current->mm->end_code,
+ (void*)current->mm->start_data,
+ (void*)current->mm->end_data,
+ (void*)current->mm->end_data,
+ (void*)current->mm->brk,
+ (void*)current->mm->start_stack);
+ }
+
+ printk("return address: 0x%p; contents of [PC-16...PC+8]:\n", retaddr);
+ if (retaddr != 0 && retaddr <= (void*)physical_mem_end
+#if L1_CODE_LENGTH != 0
+ /* FIXME: Copy the code out of L1 Instruction SRAM through dma
+ memcpy. */
+ && !(retaddr >= (void*)L1_CODE_START
+ && retaddr < (void*)(L1_CODE_START + L1_CODE_LENGTH))
+#endif
+ ) {
+ int i = 0;
+ unsigned short x = 0;
+ for (i = -16; i < 8; i++) {
+ if (get_user(x, (unsigned short *)retaddr + i))
+ break;
+#ifndef CONFIG_DEBUG_HWERR
+ /* If one of the last few instructions was a STI
+ * it is likily that the error occured awhile ago
+ * and we just noticed
+ */
+ if (x >= 0x0040 && x <= 0x0047 && i <= 0)
+ panic("\n\nWARNING : You should reconfigure the kernel to turn on\n"
+ " 'Hardware error interrupt debugging'\n"
+ " The rest of this error is meanless\n");
+#endif
+
+ if (i == -8)
+ printk("\n");
+ if (i == 0)
+ printk("X\n");
+ printk("%04x ", x);
+ }
+ } else
+ printk("Cannot look at the [PC] for it is in unreadable L1 SRAM - sorry\n");
+
+ printk("\n\n");
+
+ printk("RETE: %08lx RETN: %08lx RETX: %08lx RETS: %08lx\n",
+ fp->rete, fp->retn, fp->retx, fp->rets);
+ printk("IPEND: %04lx SYSCFG: %04lx\n", fp->ipend, fp->syscfg);
+ printk("SEQSTAT: %08lx SP: %08lx\n", (long)fp->seqstat, (long)fp);
+ printk("R0: %08lx R1: %08lx R2: %08lx R3: %08lx\n",
+ fp->r0, fp->r1, fp->r2, fp->r3);
+ printk("R4: %08lx R5: %08lx R6: %08lx R7: %08lx\n",
+ fp->r4, fp->r5, fp->r6, fp->r7);
+ printk("P0: %08lx P1: %08lx P2: %08lx P3: %08lx\n",
+ fp->p0, fp->p1, fp->p2, fp->p3);
+ printk("P4: %08lx P5: %08lx FP: %08lx\n", fp->p4, fp->p5, fp->fp);
+ printk("A0.w: %08lx A0.x: %08lx A1.w: %08lx A1.x: %08lx\n",
+ fp->a0w, fp->a0x, fp->a1w, fp->a1x);
+
+ printk("LB0: %08lx LT0: %08lx LC0: %08lx\n", fp->lb0, fp->lt0,
+ fp->lc0);
+ printk("LB1: %08lx LT1: %08lx LC1: %08lx\n", fp->lb1, fp->lt1,
+ fp->lc1);
+ printk("B0: %08lx L0: %08lx M0: %08lx I0: %08lx\n", fp->b0, fp->l0,
+ fp->m0, fp->i0);
+ printk("B1: %08lx L1: %08lx M1: %08lx I1: %08lx\n", fp->b1, fp->l1,
+ fp->m1, fp->i1);
+ printk("B2: %08lx L2: %08lx M2: %08lx I2: %08lx\n", fp->b2, fp->l2,
+ fp->m2, fp->i2);
+ printk("B3: %08lx L3: %08lx M3: %08lx I3: %08lx\n", fp->b3, fp->l3,
+ fp->m3, fp->i3);
+
+ printk("\nUSP: %08lx ASTAT: %08lx\n", rdusp(), fp->astat);
+ if ((long)fp->seqstat & SEQSTAT_EXCAUSE) {
+ printk(KERN_EMERG "DCPLB_FAULT_ADDR=%p\n", (void*)bfin_read_DCPLB_FAULT_ADDR());
+ printk(KERN_EMERG "ICPLB_FAULT_ADDR=%p\n", (void*)bfin_read_ICPLB_FAULT_ADDR());
+ }
+
+ printk("\n\n");
+}
+
+#ifdef CONFIG_SYS_BFIN_SPINLOCK_L1
+asmlinkage int sys_bfin_spinlock(int *spinlock)__attribute__((l1_text));
+#endif
+
+asmlinkage int sys_bfin_spinlock(int *spinlock)
+{
+ int ret = 0;
+ int tmp = 0;
+
+ local_irq_disable();
+ ret = get_user(tmp, spinlock);
+ if (ret == 0) {
+ if (tmp)
+ ret = 1;
+ tmp = 1;
+ put_user(tmp, spinlock);
+ }
+ local_irq_enable();
+ return ret;
+}
+
+void panic_cplb_error(int cplb_panic, struct pt_regs *fp)
+{
+ switch (cplb_panic) {
+ case CPLB_NO_UNLOCKED:
+ printk(KERN_EMERG "All CPLBs are locked\n");
+ break;
+ case CPLB_PROT_VIOL:
+ return;
+ case CPLB_NO_ADDR_MATCH:
+ return;
+ case CPLB_UNKNOWN_ERR:
+ printk(KERN_EMERG "Unknown CPLB Exception\n");
+ break;
+ }
+
+ printk(KERN_EMERG "DCPLB_FAULT_ADDR=%p\n", (void*)bfin_read_DCPLB_FAULT_ADDR());
+ printk(KERN_EMERG "ICPLB_FAULT_ADDR=%p\n", (void*)bfin_read_ICPLB_FAULT_ADDR());
+ dump_bfin_regs(fp, (void *)fp->retx);
+ dump_stack();
+ panic("Unrecoverable event\n");
+}
diff --git a/arch/blackfin/kernel/vmlinux.lds.S b/arch/blackfin/kernel/vmlinux.lds.S
new file mode 100644
index 0000000..6ae9ebb
--- /dev/null
+++ b/arch/blackfin/kernel/vmlinux.lds.S
@@ -0,0 +1,228 @@
+/*
+ * File: arch/blackfin/kernel/vmlinux.lds.S
+ * Based on: none - original work
+ * Author:
+ *
+ * Created: Tue Sep 21 2004
+ * Description: Master linker script for blackfin architecture
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#define VMLINUX_SYMBOL(_sym_) _##_sym_
+
+#include <asm-generic/vmlinux.lds.h>
+#include <asm/mem_map.h>
+
+
+OUTPUT_FORMAT("elf32-bfin")
+ENTRY(__start)
+_jiffies = _jiffies_64;
+
+MEMORY
+{
+ ram : ORIGIN = CONFIG_BOOT_LOAD, LENGTH = (CONFIG_MEM_SIZE * 1024 * 1024) - (CONFIG_BOOT_LOAD)
+ l1_data_a : ORIGIN = L1_DATA_A_START, LENGTH = L1_DATA_A_LENGTH
+ l1_data_b : ORIGIN = L1_DATA_B_START, LENGTH = L1_DATA_B_LENGTH
+ l1_code : ORIGIN = L1_CODE_START, LENGTH = L1_CODE_LENGTH
+ l1_scratch : ORIGIN = L1_SCRATCH_START, LENGTH = L1_SCRATCH_LENGTH
+}
+
+SECTIONS
+{
+ . = CONFIG_BOOT_LOAD;
+
+ .text :
+ {
+ _text = .;
+ __stext = .;
+ *(.text)
+ SCHED_TEXT
+ *(.text.lock)
+ . = ALIGN(16);
+ ___start___ex_table = .;
+ *(__ex_table)
+ ___stop___ex_table = .;
+
+ *($code)
+ *(.rodata)
+ *(.rodata.*)
+ *(__vermagic) /* Kernel version magic */
+ *(.rodata1)
+ *(.fixup)
+ *(.spinlock.text)
+
+ /* Kernel symbol table: Normal symbols */
+ . = ALIGN(4);
+ ___start___ksymtab = .;
+ *(__ksymtab)
+ ___stop___ksymtab = .;
+
+ /* Kernel symbol table: GPL-only symbols */
+ ___start___ksymtab_gpl = .;
+ *(__ksymtab_gpl)
+ ___stop___ksymtab_gpl = .;
+
+ /* Kernel symbol table: Normal unused symbols */ \
+ ___start___ksymtab_unused = .;
+ *(__ksymtab_unused)
+ ___stop___ksymtab_unused = .;
+
+ /* Kernel symbol table: GPL-only unused symbols */
+ ___start___ksymtab_unused_gpl = .;
+ *(__ksymtab_unused_gpl)
+ ___stop___ksymtab_unused_gpl = .;
+
+
+ /* Kernel symbol table: GPL-future symbols */
+ ___start___ksymtab_gpl_future = .;
+ *(__ksymtab_gpl_future)
+ ___stop___ksymtab_gpl_future = .;
+
+ /* Kernel symbol table: Normal symbols */
+ ___start___kcrctab = .;
+ *(__kcrctab)
+ ___stop___kcrctab = .;
+
+ /* Kernel symbol table: GPL-only symbols */
+ ___start___kcrctab_gpl = .;
+ *(__kcrctab_gpl)
+ ___stop___kcrctab_gpl = .;
+
+ /* Kernel symbol table: GPL-future symbols */
+ ___start___kcrctab_gpl_future = .;
+ *(__kcrctab_gpl_future)
+ ___stop___kcrctab_gpl_future = .;
+
+ /* Kernel symbol table: strings */
+ *(__ksymtab_strings)
+
+ . = ALIGN(4);
+ __etext = .;
+ } > ram
+
+ .init :
+ {
+ . = ALIGN(4096);
+ ___init_begin = .;
+ __sinittext = .;
+ *(.init.text)
+ __einittext = .;
+ *(.init.data)
+ . = ALIGN(16);
+ ___setup_start = .;
+ *(.init.setup)
+ ___setup_end = .;
+ ___start___param = .;
+ *(__param)
+ ___stop___param = .;
+ ___initcall_start = .;
+ INITCALLS
+ ___initcall_end = .;
+ ___con_initcall_start = .;
+ *(.con_initcall.init)
+ ___con_initcall_end = .;
+ ___security_initcall_start = .;
+ *(.security_initcall.init)
+ ___security_initcall_end = .;
+ . = ALIGN(4);
+ ___initramfs_start = .;
+ *(.init.ramfs)
+ ___initramfs_end = .;
+ . = ALIGN(4);
+ ___init_end = .;
+ } > ram
+
+ __l1_lma_start = .;
+
+ .text_l1 :
+ {
+ . = ALIGN(4);
+ __stext_l1 = .;
+ *(.l1.text)
+
+ . = ALIGN(4);
+ __etext_l1 = .;
+ } > l1_code AT > ram
+
+ .data_l1 :
+ {
+ . = ALIGN(4);
+ __sdata_l1 = .;
+ *(.l1.data)
+ __edata_l1 = .;
+
+ . = ALIGN(4);
+ __sbss_l1 = .;
+ *(.l1.bss)
+
+ . = ALIGN(32);
+ *(.data_l1.cacheline_aligned)
+
+ . = ALIGN(4);
+ __ebss_l1 = .;
+ } > l1_data_a AT > ram
+ .data_b_l1 :
+ {
+ . = ALIGN(4);
+ __sdata_b_l1 = .;
+ *(.l1.data.B)
+ __edata_b_l1 = .;
+
+ . = ALIGN(4);
+ __sbss_b_l1 = .;
+ *(.l1.bss.B)
+
+ . = ALIGN(4);
+ __ebss_b_l1 = .;
+ } > l1_data_b AT > ram
+
+ .data :
+ {
+ __sdata = .;
+ . = ALIGN(0x2000);
+ *(.data.init_task)
+ *(.data)
+
+ . = ALIGN(32);
+ *(.data.cacheline_aligned)
+
+ . = ALIGN(0x2000);
+ __edata = .;
+ } > ram
+
+ /DISCARD/ : { /* Exit code and data*/
+ *(.exit.text)
+ *(.exit.data)
+ *(.exitcall.exit)
+ } > ram
+
+ .bss :
+ {
+ . = ALIGN(4);
+ ___bss_start = .;
+ *(.bss)
+ *(COMMON)
+ . = ALIGN(4);
+ ___bss_stop = .;
+ __end = . ;
+ } > ram
+}
diff --git a/arch/blackfin/lib/Makefile b/arch/blackfin/lib/Makefile
new file mode 100644
index 0000000..635288f
--- /dev/null
+++ b/arch/blackfin/lib/Makefile
@@ -0,0 +1,11 @@
+#
+# arch/blackfin/lib/Makefile
+#
+
+lib-y := \
+ ashldi3.o ashrdi3.o lshrdi3.o \
+ muldi3.o divsi3.o udivsi3.o modsi3.o umodsi3.o \
+ checksum.o memcpy.o memset.o memcmp.o memchr.o memmove.o \
+ strcmp.o strcpy.o strncmp.o strncpy.o \
+ umulsi3_highpart.o smulsi3_highpart.o \
+ ins.o outs.o
diff --git a/arch/blackfin/lib/ashldi3.c b/arch/blackfin/lib/ashldi3.c
new file mode 100644
index 0000000..a8c279e
--- /dev/null
+++ b/arch/blackfin/lib/ashldi3.c
@@ -0,0 +1,58 @@
+/*
+ * File: arch/blackfin/lib/ashldi3.c
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include "gcclib.h"
+
+#ifdef CONFIG_ARITHMETIC_OPS_L1
+DItype __ashldi3(DItype u, word_type b)__attribute__((l1_text));
+#endif
+
+DItype __ashldi3(DItype u, word_type b)
+{
+ DIunion w;
+ word_type bm;
+ DIunion uu;
+
+ if (b == 0)
+ return u;
+
+ uu.ll = u;
+
+ bm = (sizeof(SItype) * BITS_PER_UNIT) - b;
+ if (bm <= 0) {
+ w.s.low = 0;
+ w.s.high = (USItype) uu.s.low << -bm;
+ } else {
+ USItype carries = (USItype) uu.s.low >> bm;
+ w.s.low = (USItype) uu.s.low << b;
+ w.s.high = ((USItype) uu.s.high << b) | carries;
+ }
+
+ return w.ll;
+}
diff --git a/arch/blackfin/lib/ashrdi3.c b/arch/blackfin/lib/ashrdi3.c
new file mode 100644
index 0000000..a0d3419
--- /dev/null
+++ b/arch/blackfin/lib/ashrdi3.c
@@ -0,0 +1,59 @@
+/*
+ * File: arch/blackfin/lib/ashrdi3.c
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include "gcclib.h"
+
+#ifdef CONFIG_ARITHMETIC_OPS_L1
+DItype __ashrdi3(DItype u, word_type b)__attribute__((l1_text));
+#endif
+
+DItype __ashrdi3(DItype u, word_type b)
+{
+ DIunion w;
+ word_type bm;
+ DIunion uu;
+
+ if (b == 0)
+ return u;
+
+ uu.ll = u;
+
+ bm = (sizeof(SItype) * BITS_PER_UNIT) - b;
+ if (bm <= 0) {
+ /* w.s.high = 1..1 or 0..0 */
+ w.s.high = uu.s.high >> (sizeof(SItype) * BITS_PER_UNIT - 1);
+ w.s.low = uu.s.high >> -bm;
+ } else {
+ USItype carries = (USItype) uu.s.high << bm;
+ w.s.high = uu.s.high >> b;
+ w.s.low = ((USItype) uu.s.low >> b) | carries;
+ }
+
+ return w.ll;
+}
diff --git a/arch/blackfin/lib/checksum.c b/arch/blackfin/lib/checksum.c
new file mode 100644
index 0000000..42768e0
--- /dev/null
+++ b/arch/blackfin/lib/checksum.c
@@ -0,0 +1,140 @@
+/*
+ * File: arch/blackfin/lib/checksum.c
+ * Based on: none - original work
+ * Author:
+ *
+ * Created:
+ * Description: An implementation of the TCP/IP protocol suite for the LINUX
+ * operating system. INET is implemented using the BSD Socket
+ * interface as the means of communication with the user level.
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <net/checksum.h>
+#include <asm/checksum.h>
+
+#ifdef CONFIG_IP_CHECKSUM_L1
+static unsigned short do_csum(const unsigned char *buff, int len)__attribute__((l1_text));
+#endif
+
+static unsigned short do_csum(const unsigned char *buff, int len)
+{
+ register unsigned long sum = 0;
+ int swappem = 0;
+
+ if (1 & (unsigned long)buff) {
+ sum = *buff << 8;
+ buff++;
+ len--;
+ ++swappem;
+ }
+
+ while (len > 1) {
+ sum += *(unsigned short *)buff;
+ buff += 2;
+ len -= 2;
+ }
+
+ if (len > 0)
+ sum += *buff;
+
+ /* Fold 32-bit sum to 16 bits */
+ while (sum >> 16)
+ sum = (sum & 0xffff) + (sum >> 16);
+
+ if (swappem)
+ sum = ((sum & 0xff00) >> 8) + ((sum & 0x00ff) << 8);
+
+ return sum;
+
+}
+
+/*
+ * This is a version of ip_compute_csum() optimized for IP headers,
+ * which always checksum on 4 octet boundaries.
+ */
+unsigned short ip_fast_csum(unsigned char *iph, unsigned int ihl)
+{
+ return ~do_csum(iph, ihl * 4);
+}
+
+/*
+ * computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit)
+ *
+ * returns a 32-bit number suitable for feeding into itself
+ * or csum_tcpudp_magic
+ *
+ * this function must be called with even lengths, except
+ * for the last fragment, which may be odd
+ *
+ * it's best to have buff aligned on a 32-bit boundary
+ */
+unsigned int csum_partial(const unsigned char *buff, int len, unsigned int sum)
+{
+ /*
+ * Just in case we get nasty checksum data...
+ * Like 0xffff6ec3 in the case of our IPv6 multicast header.
+ * We fold to begin with, as well as at the end.
+ */
+ sum = (sum & 0xffff) + (sum >> 16);
+
+ sum += do_csum(buff, len);
+
+ sum = (sum & 0xffff) + (sum >> 16);
+
+ return sum;
+}
+
+/*
+ * this routine is used for miscellaneous IP-like checksums, mainly
+ * in icmp.c
+ */
+unsigned short ip_compute_csum(const unsigned char *buff, int len)
+{
+ return ~do_csum(buff, len);
+}
+
+/*
+ * copy from fs while checksumming, otherwise like csum_partial
+ */
+
+unsigned int
+csum_partial_copy_from_user(const unsigned char *src, unsigned char *dst,
+ int len, int sum, int *csum_err)
+{
+ if (csum_err)
+ *csum_err = 0;
+ memcpy(dst, src, len);
+ return csum_partial(dst, len, sum);
+}
+
+/*
+ * copy from ds while checksumming, otherwise like csum_partial
+ */
+
+unsigned int csum_partial_copy(const unsigned char *src, unsigned char *dst,
+ int len, int sum)
+{
+ memcpy(dst, src, len);
+ return csum_partial(dst, len, sum);
+}
diff --git a/arch/blackfin/lib/divsi3.S b/arch/blackfin/lib/divsi3.S
new file mode 100644
index 0000000..3e29861
--- /dev/null
+++ b/arch/blackfin/lib/divsi3.S
@@ -0,0 +1,216 @@
+/*
+ * File: arch/blackfin/lib/divsi3.S
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description: 16 / 32 bit signed division.
+ * Special cases :
+ * 1) If(numerator == 0)
+ * return 0
+ * 2) If(denominator ==0)
+ * return positive max = 0x7fffffff
+ * 3) If(numerator == denominator)
+ * return 1
+ * 4) If(denominator ==1)
+ * return numerator
+ * 5) If(denominator == -1)
+ * return -numerator
+ *
+ * Operand : R0 - Numerator (i)
+ * R1 - Denominator (i)
+ * R0 - Quotient (o)
+ * Registers Used : R2-R7,P0-P2
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+.global ___divsi3;
+
+#ifdef CONFIG_ARITHMETIC_OPS_L1
+.section .l1.text
+#else
+.text
+#endif
+
+.align 2;
+___divsi3 :
+
+
+ R3 = R0 ^ R1;
+ R0 = ABS R0;
+
+ CC = V;
+
+ r3 = rot r3 by -1;
+ r1 = abs r1; /* now both positive, r3.30 means "negate result",
+ ** r3.31 means overflow, add one to result
+ */
+ cc = r0 < r1;
+ if cc jump .Lret_zero;
+ r2 = r1 >> 15;
+ cc = r2;
+ if cc jump .Lidents;
+ r2 = r1 << 16;
+ cc = r2 <= r0;
+ if cc jump .Lidents;
+
+ DIVS(R0, R1);
+ DIVQ(R0, R1);
+ DIVQ(R0, R1);
+ DIVQ(R0, R1);
+ DIVQ(R0, R1);
+ DIVQ(R0, R1);
+ DIVQ(R0, R1);
+ DIVQ(R0, R1);
+ DIVQ(R0, R1);
+ DIVQ(R0, R1);
+ DIVQ(R0, R1);
+ DIVQ(R0, R1);
+ DIVQ(R0, R1);
+ DIVQ(R0, R1);
+ DIVQ(R0, R1);
+ DIVQ(R0, R1);
+ DIVQ(R0, R1);
+
+ R0 = R0.L (Z);
+ r1 = r3 >> 31; /* add overflow issue back in */
+ r0 = r0 + r1;
+ r1 = -r0;
+ cc = bittst(r3, 30);
+ if cc r0 = r1;
+ RTS;
+
+/* Can't use the primitives. Test common identities.
+** If the identity is true, return the value in R2.
+*/
+
+.Lidents:
+ CC = R1 == 0; /* check for divide by zero */
+ IF CC JUMP .Lident_return;
+
+ CC = R0 == 0; /* check for division of zero */
+ IF CC JUMP .Lzero_return;
+
+ CC = R0 == R1; /* check for identical operands */
+ IF CC JUMP .Lident_return;
+
+ CC = R1 == 1; /* check for divide by 1 */
+ IF CC JUMP .Lident_return;
+
+ R2.L = ONES R1;
+ R2 = R2.L (Z);
+ CC = R2 == 1;
+ IF CC JUMP .Lpower_of_two;
+
+ /* Identities haven't helped either.
+ ** Perform the full division process.
+ */
+
+ P1 = 31; /* Set loop counter */
+
+ [--SP] = (R7:5); /* Push registers R5-R7 */
+ R2 = -R1;
+ [--SP] = R2;
+ R2 = R0 << 1; /* R2 lsw of dividend */
+ R6 = R0 ^ R1; /* Get sign */
+ R5 = R6 >> 31; /* Shift sign to LSB */
+
+ R0 = 0 ; /* Clear msw partial remainder */
+ R2 = R2 | R5; /* Shift quotient bit */
+ R6 = R0 ^ R1; /* Get new quotient bit */
+
+ LSETUP(.Llst,.Llend) LC0 = P1; /* Setup loop */
+.Llst: R7 = R2 >> 31; /* record copy of carry from R2 */
+ R2 = R2 << 1; /* Shift 64 bit dividend up by 1 bit */
+ R0 = R0 << 1 || R5 = [SP];
+ R0 = R0 | R7; /* and add carry */
+ CC = R6 < 0; /* Check quotient(AQ) */
+ /* we might be subtracting divisor (AQ==0) */
+ IF CC R5 = R1; /* or we might be adding divisor (AQ==1)*/
+ R0 = R0 + R5; /* do add or subtract, as indicated by AQ */
+ R6 = R0 ^ R1; /* Generate next quotient bit */
+ R5 = R6 >> 31;
+ /* Assume AQ==1, shift in zero */
+ BITTGL(R5,0); /* tweak AQ to be what we want to shift in */
+.Llend: R2 = R2 + R5; /* and then set shifted-in value to
+ ** tweaked AQ.
+ */
+ r1 = r3 >> 31;
+ r2 = r2 + r1;
+ cc = bittst(r3,30);
+ r0 = -r2;
+ if !cc r0 = r2;
+ SP += 4;
+ (R7:5)= [SP++]; /* Pop registers R6-R7 */
+ RTS;
+
+.Lident_return:
+ CC = R1 == 0; /* check for divide by zero => 0x7fffffff */
+ R2 = -1 (X);
+ R2 >>= 1;
+ IF CC JUMP .Ltrue_ident_return;
+
+ CC = R0 == R1; /* check for identical operands => 1 */
+ R2 = 1 (Z);
+ IF CC JUMP .Ltrue_ident_return;
+
+ R2 = R0; /* assume divide by 1 => numerator */
+ /*FALLTHRU*/
+
+.Ltrue_ident_return:
+ R0 = R2; /* Return an identity value */
+ R2 = -R2;
+ CC = bittst(R3,30);
+ IF CC R0 = R2;
+.Lzero_return:
+ RTS; /* ...including zero */
+
+.Lpower_of_two:
+ /* Y has a single bit set, which means it's a power of two.
+ ** That means we can perform the division just by shifting
+ ** X to the right the appropriate number of bits
+ */
+
+ /* signbits returns the number of sign bits, minus one.
+ ** 1=>30, 2=>29, ..., 0x40000000=>0. Which means we need
+ ** to shift right n-signbits spaces. It also means 0x80000000
+ ** is a special case, because that *also* gives a signbits of 0
+ */
+
+ R2 = R0 >> 31;
+ CC = R1 < 0;
+ IF CC JUMP .Ltrue_ident_return;
+
+ R1.l = SIGNBITS R1;
+ R1 = R1.L (Z);
+ R1 += -30;
+ R0 = LSHIFT R0 by R1.L;
+ r1 = r3 >> 31;
+ r0 = r0 + r1;
+ R2 = -R0; // negate result if necessary
+ CC = bittst(R3,30);
+ IF CC R0 = R2;
+ RTS;
+
+.Lret_zero:
+ R0 = 0;
+ RTS;
diff --git a/arch/blackfin/lib/gcclib.h b/arch/blackfin/lib/gcclib.h
new file mode 100644
index 0000000..9ccd39a
--- /dev/null
+++ b/arch/blackfin/lib/gcclib.h
@@ -0,0 +1,47 @@
+/*
+ * File: arch/blackfin/lib/gcclib.h
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#define BITS_PER_UNIT 8
+#define SI_TYPE_SIZE (sizeof (SItype) * BITS_PER_UNIT)
+
+typedef unsigned int UQItype __attribute__ ((mode(QI)));
+typedef int SItype __attribute__ ((mode(SI)));
+typedef unsigned int USItype __attribute__ ((mode(SI)));
+typedef int DItype __attribute__ ((mode(DI)));
+typedef int word_type __attribute__ ((mode(__word__)));
+typedef unsigned int UDItype __attribute__ ((mode(DI)));
+
+struct DIstruct {
+ SItype low, high;
+};
+
+typedef union {
+ struct DIstruct s;
+ DItype ll;
+} DIunion;
diff --git a/arch/blackfin/lib/ins.S b/arch/blackfin/lib/ins.S
new file mode 100644
index 0000000..730d2b4
--- /dev/null
+++ b/arch/blackfin/lib/ins.S
@@ -0,0 +1,69 @@
+/*
+ * File: arch/blackfin/lib/ins.S
+ * Based on:
+ * Author: Bas Vermeulen <bas@buyways.nl>
+ *
+ * Created: Tue Mar 22 15:27:24 CEST 2005
+ * Description: Implementation of ins{bwl} for BlackFin processors using zero overhead loops.
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ * Copyright (C) 2005 Bas Vermeulen, BuyWays BV <bas@buyways.nl>
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/linkage.h>
+
+.align 2
+
+ENTRY(_insl)
+ P0 = R0; /* P0 = port */
+ cli R3;
+ P1 = R1; /* P1 = address */
+ P2 = R2; /* P2 = count */
+ SSYNC;
+ LSETUP( .Llong_loop_s, .Llong_loop_e) LC0 = P2;
+.Llong_loop_s: R0 = [P0];
+.Llong_loop_e: [P1++] = R0;
+ sti R3;
+ RTS;
+
+ENTRY(_insw)
+ P0 = R0; /* P0 = port */
+ cli R3;
+ P1 = R1; /* P1 = address */
+ P2 = R2; /* P2 = count */
+ SSYNC;
+ LSETUP( .Lword_loop_s, .Lword_loop_e) LC0 = P2;
+.Lword_loop_s: R0 = W[P0];
+.Lword_loop_e: W[P1++] = R0;
+ sti R3;
+ RTS;
+
+ENTRY(_insb)
+ P0 = R0; /* P0 = port */
+ cli R3;
+ P1 = R1; /* P1 = address */
+ P2 = R2; /* P2 = count */
+ SSYNC;
+ LSETUP( .Lbyte_loop_s, .Lbyte_loop_e) LC0 = P2;
+.Lbyte_loop_s: R0 = B[P0];
+.Lbyte_loop_e: B[P1++] = R0;
+ sti R3;
+ RTS;
diff --git a/arch/blackfin/lib/lshrdi3.c b/arch/blackfin/lib/lshrdi3.c
new file mode 100644
index 0000000..84b9c55
--- /dev/null
+++ b/arch/blackfin/lib/lshrdi3.c
@@ -0,0 +1,72 @@
+/*
+ * File: arch/blackfin/lib/lshrdi3.c
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#define BITS_PER_UNIT 8
+
+typedef int SItype __attribute__ ((mode(SI)));
+typedef unsigned int USItype __attribute__ ((mode(SI)));
+typedef int DItype __attribute__ ((mode(DI)));
+typedef int word_type __attribute__ ((mode(__word__)));
+
+struct DIstruct {
+ SItype high, low;
+};
+
+typedef union {
+ struct DIstruct s;
+ DItype ll;
+} DIunion;
+
+#ifdef CONFIG_ARITHMETIC_OPS_L1
+DItype __lshrdi3(DItype u, word_type b)__attribute__((l1_text));
+#endif
+
+DItype __lshrdi3(DItype u, word_type b)
+{
+ DIunion w;
+ word_type bm;
+ DIunion uu;
+
+ if (b == 0)
+ return u;
+
+ uu.ll = u;
+
+ bm = (sizeof(SItype) * BITS_PER_UNIT) - b;
+ if (bm <= 0) {
+ w.s.high = 0;
+ w.s.low = (USItype) uu.s.high >> -bm;
+ } else {
+ USItype carries = (USItype) uu.s.high << bm;
+ w.s.high = (USItype) uu.s.high >> b;
+ w.s.low = ((USItype) uu.s.low >> b) | carries;
+ }
+
+ return w.ll;
+}
diff --git a/arch/blackfin/lib/memchr.S b/arch/blackfin/lib/memchr.S
new file mode 100644
index 0000000..4981222
--- /dev/null
+++ b/arch/blackfin/lib/memchr.S
@@ -0,0 +1,70 @@
+/*
+ * File: arch/blackfin/lib/memchr.S
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/linkage.h>
+
+/* void *memchr(const void *s, int c, size_t n);
+ * R0 = address (s)
+ * R1 = sought byte (c)
+ * R2 = count (n)
+ *
+ * Returns pointer to located character.
+ */
+
+.text
+
+.align 2
+
+ENTRY(_memchr)
+ P0 = R0; /* P0 = address */
+ P2 = R2; /* P2 = count */
+ R1 = R1.B(Z);
+ CC = R2 == 0;
+ IF CC JUMP .Lfailed;
+
+.Lbytes:
+ LSETUP (.Lbyte_loop_s, .Lbyte_loop_e) LC0=P2;
+
+.Lbyte_loop_s:
+ R3 = B[P0++](Z);
+ CC = R3 == R1;
+ IF CC JUMP .Lfound;
+.Lbyte_loop_e:
+ NOP;
+
+.Lfailed:
+ R0=0;
+ RTS;
+
+.Lfound:
+ R0 = P0;
+ R0 += -1;
+ RTS;
+
+.size _memchr,.-_memchr
diff --git a/arch/blackfin/lib/memcmp.S b/arch/blackfin/lib/memcmp.S
new file mode 100644
index 0000000..5b95023
--- /dev/null
+++ b/arch/blackfin/lib/memcmp.S
@@ -0,0 +1,110 @@
+/*
+ * File: arch/blackfin/lib/memcmp.S
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/linkage.h>
+
+/* int memcmp(const void *s1, const void *s2, size_t n);
+ * R0 = First Address (s1)
+ * R1 = Second Address (s2)
+ * R2 = count (n)
+ *
+ * Favours word aligned data.
+ */
+
+.text
+
+.align 2
+
+ENTRY(_memcmp)
+ I1 = P3;
+ P0 = R0; /* P0 = s1 address */
+ P3 = R1; /* P3 = s2 Address */
+ P2 = R2 ; /* P2 = count */
+ CC = R2 <= 7(IU);
+ IF CC JUMP .Ltoo_small;
+ I0 = R1; /* s2 */
+ R1 = R1 | R0; /* OR addresses together */
+ R1 <<= 30; /* check bottom two bits */
+ CC = AZ; /* AZ set if zero. */
+ IF !CC JUMP .Lbytes ; /* Jump if addrs not aligned. */
+
+ P1 = P2 >> 2; /* count = n/4 */
+ R3 = 3;
+ R2 = R2 & R3; /* remainder */
+ P2 = R2; /* set remainder */
+
+ LSETUP (.Lquad_loop_s, .Lquad_loop_e) LC0=P1;
+.Lquad_loop_s:
+ MNOP || R0 = [P0++] || R1 = [I0++];
+ CC = R0 == R1;
+ IF !CC JUMP .Lquad_different;
+.Lquad_loop_e:
+ NOP;
+
+ P3 = I0; /* s2 */
+.Ltoo_small:
+ CC = P2 == 0; /* Check zero count*/
+ IF CC JUMP .Lfinished; /* very unlikely*/
+
+.Lbytes:
+ LSETUP (.Lbyte_loop_s, .Lbyte_loop_e) LC0=P2;
+.Lbyte_loop_s:
+ R1 = B[P3++](Z); /* *s2 */
+ R0 = B[P0++](Z); /* *s1 */
+ CC = R0 == R1;
+ IF !CC JUMP .Ldifferent;
+.Lbyte_loop_e:
+ NOP;
+
+.Ldifferent:
+ R0 = R0 - R1;
+ P3 = I1;
+ RTS;
+
+.Lquad_different:
+ /* We've read two quads which don't match.
+ * Can't just compare them, because we're
+ * a little-endian machine, so the MSBs of
+ * the regs occur at later addresses in the
+ * string.
+ * Arrange to re-read those two quads again,
+ * byte-by-byte.
+ */
+ P0 += -4; /* back up to the start of the */
+ P3 = I0; /* quads, and increase the*/
+ P2 += 4; /* remainder count*/
+ P3 += -4;
+ JUMP .Lbytes;
+
+.Lfinished:
+ R0 = 0;
+ P3 = I1;
+ RTS;
+
+.size _memcmp,.-_memcmp
diff --git a/arch/blackfin/lib/memcpy.S b/arch/blackfin/lib/memcpy.S
new file mode 100644
index 0000000..c1e00ef
--- /dev/null
+++ b/arch/blackfin/lib/memcpy.S
@@ -0,0 +1,142 @@
+/*
+ * File: arch/blackfin/lib/memcpy.S
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description: internal version of memcpy(), issued by the compiler
+ * to copy blocks of data around.
+ * This is really memmove() - it has to be able to deal with
+ * possible overlaps, because that ambiguity is when the compiler
+ * gives up and calls a function. We have our own, internal version
+ * so that we get something we trust, even if the user has redefined
+ * the normal symbol.
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/linkage.h>
+
+/* void *memcpy(void *dest, const void *src, size_t n);
+ * R0 = To Address (dest) (leave unchanged to form result)
+ * R1 = From Address (src)
+ * R2 = count
+ *
+ * Note: Favours word alignment
+ */
+
+#ifdef CONFIG_MEMCPY_L1
+.section .l1.text
+#else
+.text
+#endif
+
+.align 2
+
+ENTRY(_memcpy)
+ CC = R2 <= 0; /* length not positive? */
+ IF CC JUMP .L_P1L2147483647; /* Nothing to do */
+
+ P0 = R0 ; /* dst*/
+ P1 = R1 ; /* src*/
+ P2 = R2 ; /* length */
+
+ /* check for overlapping data */
+ CC = R1 < R0; /* src < dst */
+ IF !CC JUMP .Lno_overlap;
+ R3 = R1 + R2;
+ CC = R0 < R3; /* and dst < src+len */
+ IF CC JUMP .Lhas_overlap;
+
+.Lno_overlap:
+ /* Check for aligned data.*/
+
+ R3 = R1 | R0;
+ R0 = 0x3;
+ R3 = R3 & R0;
+ CC = R3; /* low bits set on either address? */
+ IF CC JUMP .Lnot_aligned;
+
+ /* Both addresses are word-aligned, so we can copy
+ at least part of the data using word copies.*/
+ P2 = P2 >> 2;
+ CC = P2 <= 2;
+ IF !CC JUMP .Lmore_than_seven;
+ /* less than eight bytes... */
+ P2 = R2;
+ LSETUP(.Lthree_start, .Lthree_end) LC0=P2;
+ R0 = R1; /* setup src address for return */
+.Lthree_start:
+ R3 = B[P1++] (X);
+.Lthree_end:
+ B[P0++] = R3;
+
+ RTS;
+
+.Lmore_than_seven:
+ /* There's at least eight bytes to copy. */
+ P2 += -1; /* because we unroll one iteration */
+ LSETUP(.Lword_loop, .Lword_loop) LC0=P2;
+ R0 = R1;
+ I1 = P1;
+ R3 = [I1++];
+.Lword_loop:
+ MNOP || [P0++] = R3 || R3 = [I1++];
+
+ [P0++] = R3;
+ /* Any remaining bytes to copy? */
+ R3 = 0x3;
+ R3 = R2 & R3;
+ CC = R3 == 0;
+ P1 = I1; /* in case there's something left, */
+ IF !CC JUMP .Lbytes_left;
+ RTS;
+.Lbytes_left: P2 = R3;
+.Lnot_aligned:
+ /* From here, we're copying byte-by-byte. */
+ LSETUP (.Lbyte_start, .Lbyte_end) LC0=P2;
+ R0 = R1; /* Save src address for return */
+.Lbyte_start:
+ R1 = B[P1++] (X);
+.Lbyte_end:
+ B[P0++] = R1;
+
+.L_P1L2147483647:
+ RTS;
+
+.Lhas_overlap:
+ /* Need to reverse the copying, because the
+ * dst would clobber the src.
+ * Don't bother to work out alignment for
+ * the reverse case.
+ */
+ R0 = R1; /* save src for later. */
+ P0 = P0 + P2;
+ P0 += -1;
+ P1 = P1 + P2;
+ P1 += -1;
+ LSETUP(.Lover_start, .Lover_end) LC0=P2;
+.Lover_start:
+ R1 = B[P1--] (X);
+.Lover_end:
+ B[P0--] = R1;
+
+ RTS;
diff --git a/arch/blackfin/lib/memmove.S b/arch/blackfin/lib/memmove.S
new file mode 100644
index 0000000..2e5fb7f
--- /dev/null
+++ b/arch/blackfin/lib/memmove.S
@@ -0,0 +1,103 @@
+/*
+ * File: arch/blackfin/lib/memmove.S
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/linkage.h>
+
+.align 2
+
+/*
+ * C Library function MEMMOVE
+ * R0 = To Address (leave unchanged to form result)
+ * R1 = From Address
+ * R2 = count
+ * Data may overlap
+ */
+
+ENTRY(_memmove)
+ I1 = P3;
+ P0 = R0; /* P0 = To address */
+ P3 = R1; /* P3 = From Address */
+ P2 = R2; /* P2 = count */
+ CC = P2 == 0; /* Check zero count*/
+ IF CC JUMP .Lfinished; /* very unlikely */
+
+ CC = R1 < R0 (IU); /* From < To */
+ IF !CC JUMP .Lno_overlap;
+ R3 = R1 + R2;
+ CC = R0 <= R3 (IU); /* (From+len) >= To */
+ IF CC JUMP .Loverlap;
+.Lno_overlap:
+ R3 = 11;
+ CC = R2 <= R3;
+ IF CC JUMP .Lbytes;
+ R3 = R1 | R0; /* OR addresses together */
+ R3 <<= 30; /* check bottom two bits */
+ CC = AZ; /* AZ set if zero.*/
+ IF !CC JUMP .Lbytes; /* Jump if addrs not aligned.*/
+
+ I0 = P3;
+ P1 = P2 >> 2; /* count = n/4 */
+ P1 += -1;
+ R3 = 3;
+ R2 = R2 & R3; /* remainder */
+ P2 = R2; /* set remainder */
+ R1 = [I0++];
+
+ LSETUP (.Lquad_loop, .Lquad_loop) LC0=P1;
+.Lquad_loop: MNOP || [P0++] = R1 || R1 = [I0++];
+ [P0++] = R1;
+
+ CC = P2 == 0; /* any remaining bytes? */
+ P3 = I0; /* Ammend P3 to updated ptr. */
+ IF !CC JUMP .Lbytes;
+ P3 = I1;
+ RTS;
+
+.Lbytes: LSETUP (.Lbyte2_s, .Lbyte2_e) LC0=P2;
+.Lbyte2_s: R1 = B[P3++](Z);
+.Lbyte2_e: B[P0++] = R1;
+
+.Lfinished: P3 = I1;
+ RTS;
+
+.Loverlap:
+ P2 += -1;
+ P0 = P0 + P2;
+ P3 = P3 + P2;
+ R1 = B[P3--] (Z);
+ CC = P2 == 0;
+ IF CC JUMP .Lno_loop;
+ LSETUP (.Lol_s, .Lol_e) LC0 = P2;
+.Lol_s: B[P0--] = R1;
+.Lol_e: R1 = B[P3--] (Z);
+.Lno_loop: B[P0] = R1;
+ P3 = I1;
+ RTS;
+
+.size _memmove,.-_memmove
diff --git a/arch/blackfin/lib/memset.S b/arch/blackfin/lib/memset.S
new file mode 100644
index 0000000..ba6d047
--- /dev/null
+++ b/arch/blackfin/lib/memset.S
@@ -0,0 +1,109 @@
+/*
+ * File: arch/blackfin/lib/memset.S
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/linkage.h>
+
+.align 2
+
+#ifdef CONFIG_MEMSET_L1
+.section .l1.text
+#else
+.text
+#endif
+
+/*
+ * C Library function MEMSET
+ * R0 = address (leave unchanged to form result)
+ * R1 = filler byte
+ * R2 = count
+ * Favours word aligned data.
+ */
+
+ENTRY(_memset)
+ P0 = R0 ; /* P0 = address */
+ P2 = R2 ; /* P2 = count */
+ R3 = R0 + R2; /* end */
+ CC = R2 <= 7(IU);
+ IF CC JUMP .Ltoo_small;
+ R1 = R1.B (Z); /* R1 = fill char */
+ R2 = 3;
+ R2 = R0 & R2; /* addr bottom two bits */
+ CC = R2 == 0; /* AZ set if zero. */
+ IF !CC JUMP .Lforce_align ; /* Jump if addr not aligned. */
+
+.Laligned:
+ P1 = P2 >> 2; /* count = n/4 */
+ R2 = R1 << 8; /* create quad filler */
+ R2.L = R2.L + R1.L(NS);
+ R2.H = R2.L + R1.H(NS);
+ P2 = R3;
+
+ LSETUP (.Lquad_loop , .Lquad_loop) LC0=P1;
+.Lquad_loop:
+ [P0++] = R2;
+
+ CC = P0 == P2;
+ IF !CC JUMP .Lbytes_left;
+ RTS;
+
+.Lbytes_left:
+ R2 = R3; /* end point */
+ R3 = P0; /* current position */
+ R2 = R2 - R3; /* bytes left */
+ P2 = R2;
+
+.Ltoo_small:
+ CC = P2 == 0; /* Check zero count */
+ IF CC JUMP .Lfinished; /* Unusual */
+
+.Lbytes:
+ LSETUP (.Lbyte_loop , .Lbyte_loop) LC0=P2;
+.Lbyte_loop:
+ B[P0++] = R1;
+
+.Lfinished:
+ RTS;
+
+.Lforce_align:
+ CC = BITTST (R0, 0); /* odd byte */
+ R0 = 4;
+ R0 = R0 - R2;
+ P1 = R0;
+ R0 = P0; /* Recover return address */
+ IF !CC JUMP .Lskip1;
+ B[P0++] = R1;
+.Lskip1:
+ CC = R2 <= 2; /* 2 bytes */
+ P2 -= P1; /* reduce count */
+ IF !CC JUMP .Laligned;
+ B[P0++] = R1;
+ B[P0++] = R1;
+ JUMP .Laligned;
+
+.size _memset,.-_memset
diff --git a/arch/blackfin/lib/modsi3.S b/arch/blackfin/lib/modsi3.S
new file mode 100644
index 0000000..528b8b1
--- /dev/null
+++ b/arch/blackfin/lib/modsi3.S
@@ -0,0 +1,79 @@
+/*
+ * File: arch/blackfin/lib/modsi3.S
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description: This program computes 32 bit signed remainder. It calls div32 function
+ * for quotient estimation.
+ *
+ * Registers used :
+ * Numerator/ Denominator in R0, R1
+ * R0 - returns remainder.
+ * R2-R7
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+.global ___modsi3;
+.type ___modsi3, STT_FUNC;
+.extern ___divsi3;
+.type ___divsi3, STT_FUNC;
+
+#ifdef CONFIG_ARITHMETIC_OPS_L1
+.section .l1.text
+#else
+.text
+#endif
+
+___modsi3:
+
+ CC=R0==0;
+ IF CC JUMP .LRETURN_R0; /* Return 0, if numerator == 0 */
+ CC=R1==0;
+ IF CC JUMP .LRETURN_ZERO; /* Return 0, if denominator == 0 */
+ CC=R0==R1;
+ IF CC JUMP .LRETURN_ZERO; /* Return 0, if numerator == denominator */
+ CC = R1 == 1;
+ IF CC JUMP .LRETURN_ZERO; /* Return 0, if denominator == 1 */
+ CC = R1 == -1;
+ IF CC JUMP .LRETURN_ZERO; /* Return 0, if denominator == -1 */
+
+ /* Valid input. Use __divsi3() to compute the quotient, and then
+ * derive the remainder from that. */
+
+ [--SP] = (R7:6); /* Push R7 and R6 */
+ [--SP] = RETS; /* and return address */
+ R7 = R0; /* Copy of R0 */
+ R6 = R1; /* Save for later */
+ SP += -12; /* Should always provide this space */
+ CALL ___divsi3; /* Compute signed quotient using ___divsi3()*/
+ SP += 12;
+ R0 *= R6; /* Quotient * divisor */
+ R0 = R7 - R0; /* Dividend - (quotient * divisor) */
+ RETS = [SP++]; /* Get back return address */
+ (R7:6) = [SP++]; /* Pop registers R7 and R4 */
+ RTS; /* Store remainder */
+
+.LRETURN_ZERO:
+ R0 = 0;
+.LRETURN_R0:
+ RTS;
diff --git a/arch/blackfin/lib/muldi3.c b/arch/blackfin/lib/muldi3.c
new file mode 100644
index 0000000..303d0c6
--- /dev/null
+++ b/arch/blackfin/lib/muldi3.c
@@ -0,0 +1,99 @@
+/*
+ * File: arch/blackfin/lib/muldi3.c
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef SI_TYPE_SIZE
+#define SI_TYPE_SIZE 32
+#endif
+#define __ll_b (1L << (SI_TYPE_SIZE / 2))
+#define __ll_lowpart(t) ((usitype) (t) % __ll_b)
+#define __ll_highpart(t) ((usitype) (t) / __ll_b)
+#define BITS_PER_UNIT 8
+
+#if !defined(umul_ppmm)
+#define umul_ppmm(w1, w0, u, v) \
+ do { \
+ usitype __x0, __x1, __x2, __x3; \
+ usitype __ul, __vl, __uh, __vh; \
+ \
+ __ul = __ll_lowpart (u); \
+ __uh = __ll_highpart (u); \
+ __vl = __ll_lowpart (v); \
+ __vh = __ll_highpart (v); \
+ \
+ __x0 = (usitype) __ul * __vl; \
+ __x1 = (usitype) __ul * __vh; \
+ __x2 = (usitype) __uh * __vl; \
+ __x3 = (usitype) __uh * __vh; \
+ \
+ __x1 += __ll_highpart (__x0);/* this can't give carry */ \
+ __x1 += __x2; /* but this indeed can */ \
+ if (__x1 < __x2) /* did we get it? */ \
+ __x3 += __ll_b; /* yes, add it in the proper pos. */ \
+ \
+ (w1) = __x3 + __ll_highpart (__x1); \
+ (w0) = __ll_lowpart (__x1) * __ll_b + __ll_lowpart (__x0); \
+ } while (0)
+#endif
+
+#if !defined(__umulsidi3)
+#define __umulsidi3(u, v) \
+ ({diunion __w; \
+ umul_ppmm (__w.s.high, __w.s.low, u, v); \
+ __w.ll; })
+#endif
+
+typedef unsigned int usitype __attribute__ ((mode(SI)));
+typedef int sitype __attribute__ ((mode(SI)));
+typedef int ditype __attribute__ ((mode(DI)));
+typedef int word_type __attribute__ ((mode(__word__)));
+
+struct distruct {
+ sitype low, high;
+};
+typedef union {
+ struct distruct s;
+ ditype ll;
+} diunion;
+
+#ifdef CONFIG_ARITHMETIC_OPS_L1
+ditype __muldi3(ditype u, ditype v)__attribute__((l1_text));
+#endif
+
+ditype __muldi3(ditype u, ditype v)
+{
+ diunion w;
+ diunion uu, vv;
+
+ uu.ll = u, vv.ll = v;
+ w.ll = __umulsidi3(uu.s.low, vv.s.low);
+ w.s.high += ((usitype) uu.s.low * (usitype) vv.s.high
+ + (usitype) uu.s.high * (usitype) vv.s.low);
+
+ return w.ll;
+}
diff --git a/arch/blackfin/lib/outs.S b/arch/blackfin/lib/outs.S
new file mode 100644
index 0000000..f8c876f
--- /dev/null
+++ b/arch/blackfin/lib/outs.S
@@ -0,0 +1,62 @@
+/*
+ * File: arch/blackfin/lib/outs.S
+ * Based on:
+ * Author: Bas Vermeulen <bas@buyways.nl>
+ *
+ * Created: Tue Mar 22 15:27:24 CEST 2005
+ * Description: Implementation of outs{bwl} for BlackFin processors using zero overhead loops.
+ *
+ * Modified: Copyright (C) 2005 Bas Vermeulen, BuyWays BV <bas@buyways.nl>
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/linkage.h>
+
+.align 2
+
+ENTRY(_outsl)
+ P0 = R0; /* P0 = port */
+ P1 = R1; /* P1 = address */
+ P2 = R2; /* P2 = count */
+
+ LSETUP( .Llong_loop_s, .Llong_loop_e) LC0 = P2;
+.Llong_loop_s: R0 = [P1++];
+.Llong_loop_e: [P0] = R0;
+ RTS;
+
+ENTRY(_outsw)
+ P0 = R0; /* P0 = port */
+ P1 = R1; /* P1 = address */
+ P2 = R2; /* P2 = count */
+
+ LSETUP( .Lword_loop_s, .Lword_loop_e) LC0 = P2;
+.Lword_loop_s: R0 = W[P1++];
+.Lword_loop_e: W[P0] = R0;
+ RTS;
+
+ENTRY(_outsb)
+ P0 = R0; /* P0 = port */
+ P1 = R1; /* P1 = address */
+ P2 = R2; /* P2 = count */
+
+ LSETUP( .Lbyte_loop_s, .Lbyte_loop_e) LC0 = P2;
+.Lbyte_loop_s: R0 = B[P1++];
+.Lbyte_loop_e: B[P0] = R0;
+ RTS;
diff --git a/arch/blackfin/lib/smulsi3_highpart.S b/arch/blackfin/lib/smulsi3_highpart.S
new file mode 100644
index 0000000..10b8f8d
--- /dev/null
+++ b/arch/blackfin/lib/smulsi3_highpart.S
@@ -0,0 +1,30 @@
+.align 2
+.global ___smulsi3_highpart;
+.type ___smulsi3_highpart, STT_FUNC;
+
+#ifdef CONFIG_ARITHMETIC_OPS_L1
+.section .l1.text
+#else
+.text
+#endif
+
+___smulsi3_highpart:
+ R2 = R1.L * R0.L (FU);
+ R3 = R1.H * R0.L (IS,M);
+ R0 = R0.H * R1.H, R1 = R0.H * R1.L (IS,M);
+
+ R1.L = R2.H + R1.L;
+ cc = ac0;
+ R2 = cc;
+
+ R1.L = R1.L + R3.L;
+ cc = ac0;
+ R1 >>>= 16;
+ R3 >>>= 16;
+ R1 = R1 + R3;
+ R1 = R1 + R2;
+ R2 = cc;
+ R1 = R1 + R2;
+
+ R0 = R0 + R1;
+ RTS;
diff --git a/arch/blackfin/lib/strcmp.c b/arch/blackfin/lib/strcmp.c
new file mode 100644
index 0000000..2ad47c4
--- /dev/null
+++ b/arch/blackfin/lib/strcmp.c
@@ -0,0 +1,11 @@
+#include <linux/types.h>
+
+#define strcmp __inline_strcmp
+#include <asm/string.h>
+#undef strcmp
+
+int strcmp(const char *dest, const char *src)
+{
+ return __inline_strcmp(dest, src);
+}
+
diff --git a/arch/blackfin/lib/strcpy.c b/arch/blackfin/lib/strcpy.c
new file mode 100644
index 0000000..4dc835a
--- /dev/null
+++ b/arch/blackfin/lib/strcpy.c
@@ -0,0 +1,11 @@
+#include <linux/types.h>
+
+#define strcpy __inline_strcpy
+#include <asm/string.h>
+#undef strcpy
+
+char *strcpy(char *dest, const char *src)
+{
+ return __inline_strcpy(dest, src);
+}
+
diff --git a/arch/blackfin/lib/strncmp.c b/arch/blackfin/lib/strncmp.c
new file mode 100644
index 0000000..947bcfe
--- /dev/null
+++ b/arch/blackfin/lib/strncmp.c
@@ -0,0 +1,11 @@
+#include <linux/types.h>
+
+#define strncmp __inline_strncmp
+#include <asm/string.h>
+#undef strncmp
+
+int strncmp(const char *cs, const char *ct, size_t count)
+{
+ return __inline_strncmp(cs, ct, count);
+}
+
diff --git a/arch/blackfin/lib/strncpy.c b/arch/blackfin/lib/strncpy.c
new file mode 100644
index 0000000..77a9b2e
--- /dev/null
+++ b/arch/blackfin/lib/strncpy.c
@@ -0,0 +1,11 @@
+#include <linux/types.h>
+
+#define strncpy __inline_strncpy
+#include <asm/string.h>
+#undef strncpy
+
+char *strncpy(char *dest, const char *src, size_t n)
+{
+ return __inline_strncpy(dest, src, n);
+}
+
diff --git a/arch/blackfin/lib/udivsi3.S b/arch/blackfin/lib/udivsi3.S
new file mode 100644
index 0000000..d39a129
--- /dev/null
+++ b/arch/blackfin/lib/udivsi3.S
@@ -0,0 +1,298 @@
+/*
+ * File: arch/blackfin/lib/udivsi3.S
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/linkage.h>
+
+#define CARRY AC0
+
+#ifdef CONFIG_ARITHMETIC_OPS_L1
+.section .l1.text
+#else
+.text
+#endif
+
+
+ENTRY(___udivsi3)
+
+ CC = R0 < R1 (IU); /* If X < Y, always return 0 */
+ IF CC JUMP .Lreturn_ident;
+
+ R2 = R1 << 16;
+ CC = R2 <= R0 (IU);
+ IF CC JUMP .Lidents;
+
+ R2 = R0 >> 31; /* if X is a 31-bit number */
+ R3 = R1 >> 15; /* and Y is a 15-bit number */
+ R2 = R2 | R3; /* then it's okay to use the DIVQ builtins (fallthrough to fast)*/
+ CC = R2;
+ IF CC JUMP .Ly_16bit;
+
+/* METHOD 1: FAST DIVQ
+ We know we have a 31-bit dividend, and 15-bit divisor so we can use the
+ simple divq approach (first setting AQ to 0 - implying unsigned division,
+ then 16 DIVQ's).
+*/
+
+ AQ = CC; /* Clear AQ (CC==0) */
+
+/* ISR States: When dividing two integers (32.0/16.0) using divide primitives,
+ we need to shift the dividend one bit to the left.
+ We have already checked that we have a 31-bit number so we are safe to do
+ that.
+*/
+ R0 <<= 1;
+ DIVQ(R0, R1); // 1
+ DIVQ(R0, R1); // 2
+ DIVQ(R0, R1); // 3
+ DIVQ(R0, R1); // 4
+ DIVQ(R0, R1); // 5
+ DIVQ(R0, R1); // 6
+ DIVQ(R0, R1); // 7
+ DIVQ(R0, R1); // 8
+ DIVQ(R0, R1); // 9
+ DIVQ(R0, R1); // 10
+ DIVQ(R0, R1); // 11
+ DIVQ(R0, R1); // 12
+ DIVQ(R0, R1); // 13
+ DIVQ(R0, R1); // 14
+ DIVQ(R0, R1); // 15
+ DIVQ(R0, R1); // 16
+ R0 = R0.L (Z);
+ RTS;
+
+.Ly_16bit:
+ /* We know that the upper 17 bits of Y might have bits set,
+ ** or that the sign bit of X might have a bit. If Y is a
+ ** 16-bit number, but not bigger, then we can use the builtins
+ ** with a post-divide correction.
+ ** R3 currently holds Y>>15, which means R3's LSB is the
+ ** bit we're interested in.
+ */
+
+ /* According to the ISR, to use the Divide primitives for
+ ** unsigned integer divide, the useable range is 31 bits
+ */
+ CC = ! BITTST(R0, 31);
+
+ /* IF condition is true we can scale our inputs and use the divide primitives,
+ ** with some post-adjustment
+ */
+ R3 += -1; /* if so, Y is 0x00008nnn */
+ CC &= AZ;
+
+ /* If condition is true we can scale our inputs and use the divide primitives,
+ ** with some post-adjustment
+ */
+ R3 = R1 >> 1; /* Pre-scaled divisor for primitive case */
+ R2 = R0 >> 16;
+
+ R2 = R3 - R2; /* shifted divisor < upper 16 bits of dividend */
+ CC &= CARRY;
+ IF CC JUMP .Lshift_and_correct;
+
+ /* Fall through to the identities */
+
+/* METHOD 2: identities and manual calculation
+ We are not able to use the divide primites, but may still catch some special
+ cases.
+*/
+.Lidents:
+ /* Test for common identities. Value to be returned is placed in R2. */
+ CC = R0 == 0; /* 0/Y => 0 */
+ IF CC JUMP .Lreturn_r0;
+ CC = R0 == R1; /* X==Y => 1 */
+ IF CC JUMP .Lreturn_ident;
+ CC = R1 == 1; /* X/1 => X */
+ IF CC JUMP .Lreturn_ident;
+
+ R2.L = ONES R1;
+ R2 = R2.L (Z);
+ CC = R2 == 1;
+ IF CC JUMP .Lpower_of_two;
+
+ [--SP] = (R7:5); /* Push registers R5-R7 */
+
+ /* Idents don't match. Go for the full operation. */
+
+
+ R6 = 2; /* assume we'll shift two */
+ R3 = 1;
+
+ P2 = R1;
+ /* If either R0 or R1 have sign set, */
+ /* divide them by two, and note it's */
+ /* been done. */
+ CC = R1 < 0;
+ R2 = R1 >> 1;
+ IF CC R1 = R2; /* Possibly-shifted R1 */
+ IF !CC R6 = R3; /* R1 doesn't, so at most 1 shifted */
+
+ P0 = 0;
+ R3 = -R1;
+ [--SP] = R3;
+ R2 = R0 >> 1;
+ R2 = R0 >> 1;
+ CC = R0 < 0;
+ IF CC P0 = R6; /* Number of values divided */
+ IF !CC R2 = R0; /* Shifted R0 */
+
+ /* P0 is 0, 1 (NR/=2) or 2 (NR/=2, DR/=2) */
+
+ /* r2 holds Copy dividend */
+ R3 = 0; /* Clear partial remainder */
+ R7 = 0; /* Initialise quotient bit */
+
+ P1 = 32; /* Set loop counter */
+ LSETUP(.Lulst, .Lulend) LC0 = P1; /* Set loop counter */
+.Lulst: R6 = R2 >> 31; /* R6 = sign bit of R2, for carry */
+ R2 = R2 << 1; /* Shift 64 bit dividend up by 1 bit */
+ R3 = R3 << 1 || R5 = [SP];
+ R3 = R3 | R6; /* Include any carry */
+ CC = R7 < 0; /* Check quotient(AQ) */
+ /* If AQ==0, we'll sub divisor */
+ IF CC R5 = R1; /* and if AQ==1, we'll add it. */
+ R3 = R3 + R5; /* Add/sub divsor to partial remainder */
+ R7 = R3 ^ R1; /* Generate next quotient bit */
+
+ R5 = R7 >> 31; /* Get AQ */
+ BITTGL(R5, 0); /* Invert it, to get what we'll shift */
+.Lulend: R2 = R2 + R5; /* and "shift" it in. */
+
+ CC = P0 == 0; /* Check how many inputs we shifted */
+ IF CC JUMP .Lno_mult; /* if none... */
+ R6 = R2 << 1;
+ CC = P0 == 1;
+ IF CC R2 = R6; /* if 1, Q = Q*2 */
+ IF !CC R1 = P2; /* if 2, restore stored divisor */
+
+ R3 = R2; /* Copy of R2 */
+ R3 *= R1; /* Q * divisor */
+ R5 = R0 - R3; /* Z = (dividend - Q * divisor) */
+ CC = R1 <= R5 (IU); /* Check if divisor <= Z? */
+ R6 = CC; /* if yes, R6 = 1 */
+ R2 = R2 + R6; /* if yes, add one to quotient(Q) */
+.Lno_mult:
+ SP += 4;
+ (R7:5) = [SP++]; /* Pop registers R5-R7 */
+ R0 = R2; /* Store quotient */
+ RTS;
+
+.Lreturn_ident:
+ CC = R0 < R1 (IU); /* If X < Y, always return 0 */
+ R2 = 0;
+ IF CC JUMP .Ltrue_return_ident;
+ R2 = -1 (X); /* X/0 => 0xFFFFFFFF */
+ CC = R1 == 0;
+ IF CC JUMP .Ltrue_return_ident;
+ R2 = -R2; /* R2 now 1 */
+ CC = R0 == R1; /* X==Y => 1 */
+ IF CC JUMP .Ltrue_return_ident;
+ R2 = R0; /* X/1 => X */
+ /*FALLTHRU*/
+
+.Ltrue_return_ident:
+ R0 = R2;
+.Lreturn_r0:
+ RTS;
+
+.Lpower_of_two:
+ /* Y has a single bit set, which means it's a power of two.
+ ** That means we can perform the division just by shifting
+ ** X to the right the appropriate number of bits
+ */
+
+ /* signbits returns the number of sign bits, minus one.
+ ** 1=>30, 2=>29, ..., 0x40000000=>0. Which means we need
+ ** to shift right n-signbits spaces. It also means 0x80000000
+ ** is a special case, because that *also* gives a signbits of 0
+ */
+
+ R2 = R0 >> 31;
+ CC = R1 < 0;
+ IF CC JUMP .Ltrue_return_ident;
+
+ R1.l = SIGNBITS R1;
+ R1 = R1.L (Z);
+ R1 += -30;
+ R0 = LSHIFT R0 by R1.L;
+ RTS;
+
+/* METHOD 3: PRESCALE AND USE THE DIVIDE PRIMITIVES WITH SOME POST-CORRECTION
+ Two scaling operations are required to use the divide primitives with a
+ divisor > 0x7FFFF.
+ Firstly (as in method 1) we need to shift the dividend 1 to the left for
+ integer division.
+ Secondly we need to shift both the divisor and dividend 1 to the right so
+ both are in range for the primitives.
+ The left/right shift of the dividend does nothing so we can skip it.
+*/
+.Lshift_and_correct:
+ R2 = R0;
+ // R3 is already R1 >> 1
+ CC=!CC;
+ AQ = CC; /* Clear AQ, got here with CC = 0 */
+ DIVQ(R2, R3); // 1
+ DIVQ(R2, R3); // 2
+ DIVQ(R2, R3); // 3
+ DIVQ(R2, R3); // 4
+ DIVQ(R2, R3); // 5
+ DIVQ(R2, R3); // 6
+ DIVQ(R2, R3); // 7
+ DIVQ(R2, R3); // 8
+ DIVQ(R2, R3); // 9
+ DIVQ(R2, R3); // 10
+ DIVQ(R2, R3); // 11
+ DIVQ(R2, R3); // 12
+ DIVQ(R2, R3); // 13
+ DIVQ(R2, R3); // 14
+ DIVQ(R2, R3); // 15
+ DIVQ(R2, R3); // 16
+
+ /* According to the Instruction Set Reference:
+ To divide by a divisor > 0x7FFF,
+ 1. prescale and perform divide to obtain quotient (Q) (done above),
+ 2. multiply quotient by unscaled divisor (result M)
+ 3. subtract the product from the divident to get an error (E = X - M)
+ 4. if E < divisor (Y) subtract 1, if E > divisor (Y) add 1, else return quotient (Q)
+ */
+ R3 = R2.L (Z); /* Q = X' / Y' */
+ R2 = R3; /* Preserve Q */
+ R2 *= R1; /* M = Q * Y */
+ R2 = R0 - R2; /* E = X - M */
+ R0 = R3; /* Copy Q into result reg */
+
+/* Correction: If result of the multiply is negative, we overflowed
+ and need to correct the result by subtracting 1 from the result.*/
+ R3 = 0xFFFF (Z);
+ R2 = R2 >> 16; /* E >> 16 */
+ CC = R2 == R3;
+ R3 = 1 ;
+ R1 = R0 - R3;
+ IF CC R0 = R1;
+ RTS;
diff --git a/arch/blackfin/lib/umodsi3.S b/arch/blackfin/lib/umodsi3.S
new file mode 100644
index 0000000..b55ce96
--- /dev/null
+++ b/arch/blackfin/lib/umodsi3.S
@@ -0,0 +1,66 @@
+/*
+ * File: arch/blackfin/lib/umodsi3.S
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description: libgcc1 routines for Blackfin 5xx
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifdef CONFIG_ARITHMETIC_OPS_L1
+.section .l1.text
+#else
+.text
+#endif
+
+.extern ___udivsi3;
+.globl ___umodsi3
+___umodsi3:
+
+ CC=R0==0;
+ IF CC JUMP .LRETURN_R0; /* Return 0, if NR == 0 */
+ CC= R1==0;
+ IF CC JUMP .LRETURN_ZERO_VAL; /* Return 0, if DR == 0 */
+ CC=R0==R1;
+ IF CC JUMP .LRETURN_ZERO_VAL; /* Return 0, if NR == DR */
+ CC = R1 == 1;
+ IF CC JUMP .LRETURN_ZERO_VAL; /* Return 0, if DR == 1 */
+ CC = R0<R1 (IU);
+ IF CC JUMP .LRETURN_R0; /* Return dividend (R0),IF NR<DR */
+
+ [--SP] = (R7:6); /* Push registers and */
+ [--SP] = RETS; /* Return address */
+ R7 = R0; /* Copy of R0 */
+ R6 = R1;
+ SP += -12; /* Should always provide this space */
+ CALL ___udivsi3; /* Compute unsigned quotient using ___udiv32()*/
+ SP += 12;
+ R0 *= R6; /* Quotient * divisor */
+ R0 = R7 - R0; /* Dividend - (quotient * divisor) */
+ RETS = [SP++]; /* Pop return address */
+ ( R7:6) = [SP++]; /* And registers */
+ RTS; /* Return remainder */
+.LRETURN_ZERO_VAL:
+ R0 = 0;
+.LRETURN_R0:
+ RTS;
diff --git a/arch/blackfin/lib/umulsi3_highpart.S b/arch/blackfin/lib/umulsi3_highpart.S
new file mode 100644
index 0000000..aac8218
--- /dev/null
+++ b/arch/blackfin/lib/umulsi3_highpart.S
@@ -0,0 +1,23 @@
+.align 2
+.global ___umulsi3_highpart;
+.type ___umulsi3_highpart, STT_FUNC;
+
+#ifdef CONFIG_ARITHMETIC_OPS_L1
+.section .l1.text
+#else
+.text
+#endif
+
+___umulsi3_highpart:
+ R2 = R1.H * R0.H, R3 = R1.L * R0.H (FU);
+ R0 = R1.L * R0.L, R1 = R1.H * R0.L (FU);
+ R0 >>= 16;
+ /* Unsigned multiplication has the nice property that we can
+ ignore carry on this first addition. */
+ R0 = R0 + R3;
+ R0 = R0 + R1;
+ cc = ac0;
+ R1 = cc;
+ R1 = PACK(R1.l,R0.h);
+ R0 = R1 + R2;
+ RTS;
diff --git a/arch/blackfin/mach-bf533/Kconfig b/arch/blackfin/mach-bf533/Kconfig
new file mode 100644
index 0000000..14297b3
--- /dev/null
+++ b/arch/blackfin/mach-bf533/Kconfig
@@ -0,0 +1,92 @@
+if (BF533 || BF532 || BF531)
+
+menu "BF533/2/1 Specific Configuration"
+
+comment "Interrupt Priority Assignment"
+menu "Priority"
+
+config UART_ERROR
+ int "UART ERROR"
+ default 7
+config SPORT0_ERROR
+ int "SPORT0 ERROR"
+ default 7
+config SPI_ERROR
+ int "SPI ERROR"
+ default 7
+config SPORT1_ERROR
+ int "SPORT1 ERROR"
+ default 7
+config PPI_ERROR
+ int "PPI ERROR"
+ default 7
+config DMA_ERROR
+ int "DMA ERROR"
+ default 7
+config PLLWAKE_ERROR
+ int "PLL WAKEUP ERROR"
+ default 7
+
+config RTC_ERROR
+ int "RTC ERROR"
+ default 8
+config DMA0_PPI
+ int "DMA0 PPI"
+ default 8
+
+config DMA1_SPORT0RX
+ int "DMA1 (SPORT0 RX)"
+ default 9
+config DMA2_SPORT0TX
+ int "DMA2 (SPORT0 TX)"
+ default 9
+config DMA3_SPORT1RX
+ int "DMA3 (SPORT1 RX)"
+ default 9
+config DMA4_SPORT1TX
+ int "DMA4 (SPORT1 TX)"
+ default 9
+config DMA5_SPI
+ int "DMA5 (SPI)"
+ default 10
+config DMA6_UARTRX
+ int "DMA6 (UART0 RX)"
+ default 10
+config DMA7_UARTTX
+ int "DMA7 (UART0 TX)"
+ default 10
+config TIMER0
+ int "TIMER0"
+ default 11
+config TIMER1
+ int "TIMER1"
+ default 11
+config TIMER2
+ int "TIMER2"
+ default 11
+config PFA
+ int "PF Interrupt A"
+ default 12
+config PFB
+ int "PF Interrupt B"
+ default 12
+config MEMDMA0
+ int "MEMORY DMA0"
+ default 13
+config MEMDMA1
+ int "MEMORY DMA1"
+ default 13
+config WDTIMER
+ int "WATCH DOG TIMER"
+ default 13
+
+ help
+ Enter the priority numbers between 7-13 ONLY. Others are Reserved.
+ This applies to all the above. It is not recommended to assign the
+ highest priority number 7 to UART or any other device.
+
+endmenu
+
+endmenu
+
+endif
diff --git a/arch/blackfin/mach-bf533/Makefile b/arch/blackfin/mach-bf533/Makefile
new file mode 100644
index 0000000..76d2c2b
--- /dev/null
+++ b/arch/blackfin/mach-bf533/Makefile
@@ -0,0 +1,9 @@
+#
+# arch/blackfin/mach-bf533/Makefile
+#
+
+extra-y := head.o
+
+obj-y := ints-priority.o
+
+obj-$(CONFIG_CPU_FREQ_BF533) += cpu.o
diff --git a/arch/blackfin/mach-bf533/boards/Makefile b/arch/blackfin/mach-bf533/boards/Makefile
new file mode 100644
index 0000000..12a631a
--- /dev/null
+++ b/arch/blackfin/mach-bf533/boards/Makefile
@@ -0,0 +1,8 @@
+#
+# arch/blackfin/mach-bf533/boards/Makefile
+#
+
+obj-$(CONFIG_GENERIC_BOARD) += generic_board.o
+obj-$(CONFIG_BFIN533_STAMP) += stamp.o
+obj-$(CONFIG_BFIN533_EZKIT) += ezkit.o
+obj-$(CONFIG_BFIN533_BLUETECHNIX_CM) += cm_bf533.o
diff --git a/arch/blackfin/mach-bf533/boards/cm_bf533.c b/arch/blackfin/mach-bf533/boards/cm_bf533.c
new file mode 100644
index 0000000..23a7f60
--- /dev/null
+++ b/arch/blackfin/mach-bf533/boards/cm_bf533.c
@@ -0,0 +1,267 @@
+/*
+ * File: arch/blackfin/mach-bf533/boards/cm_bf533.c
+ * Based on: arch/blackfin/mach-bf533/boards/ezkit.c
+ * Author: Aidan Williams <aidan@nicta.com.au> Copright 2005
+ *
+ * Created: 2005
+ * Description: Board description file
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#include <linux/usb_isp1362.h>
+#include <asm/irq.h>
+#include <asm/bfin5xx_spi.h>
+
+/*
+ * Name the Board for the /proc/cpuinfo
+ */
+char *bfin_board_name = "Bluetechnix CM BF533";
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+/* all SPI peripherals info goes here */
+
+static struct mtd_partition bfin_spi_flash_partitions[] = {
+ {
+ .name = "bootloader",
+ .size = 0x00020000,
+ .offset = 0,
+ .mask_flags = MTD_CAP_ROM
+ },{
+ .name = "kernel",
+ .size = 0xe0000,
+ .offset = 0x20000
+ },{
+ .name = "file system",
+ .size = 0x700000,
+ .offset = 0x00100000,
+ }
+};
+
+static struct flash_platform_data bfin_spi_flash_data = {
+ .name = "m25p80",
+ .parts = bfin_spi_flash_partitions,
+ .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
+ .type = "m25p64",
+};
+
+/* SPI flash chip (m25p64) */
+static struct bfin5xx_spi_chip spi_flash_chip_info = {
+ .enable_dma = 0, /* use dma transfer with this chip*/
+ .bits_per_word = 8,
+};
+
+/* SPI ADC chip */
+static struct bfin5xx_spi_chip spi_adc_chip_info = {
+ .enable_dma = 1, /* use dma transfer with this chip*/
+ .bits_per_word = 16,
+};
+
+#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
+ .enable_dma = 0,
+ .bits_per_word = 16,
+};
+#endif
+
+static struct spi_board_info bfin_spi_board_info[] __initdata = {
+ {
+ /* the modalias must be the same as spi device driver name */
+ .modalias = "m25p80", /* Name of spi_driver for this device */
+ .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1, /* Framework bus number */
+ .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
+ .platform_data = &bfin_spi_flash_data,
+ .controller_data = &spi_flash_chip_info,
+ .mode = SPI_MODE_3,
+ },{
+ .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
+ .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1, /* Framework bus number */
+ .chip_select = 2, /* Framework chip select. */
+ .platform_data = NULL, /* No spi_driver specific config */
+ .controller_data = &spi_adc_chip_info,
+ },
+#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+ {
+ .modalias = "ad1836-spi",
+ .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1,
+ .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
+ .controller_data = &ad1836_spi_chip_info,
+ },
+#endif
+};
+
+/* SPI controller data */
+static struct bfin5xx_spi_master spi_bfin_master_info = {
+ .num_chipselect = 8,
+ .enable_dma = 1, /* master has the ability to do dma transfer */
+};
+
+static struct platform_device spi_bfin_master_device = {
+ .name = "bfin-spi-master",
+ .id = 1, /* Bus number */
+ .dev = {
+ .platform_data = &spi_bfin_master_info, /* Passed to driver */
+ },
+};
+#endif /* spi master and devices */
+
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+static struct platform_device rtc_device = {
+ .name = "rtc-bfin",
+ .id = -1,
+};
+#endif
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+static struct resource smc91x_resources[] = {
+ {
+ .start = 0x20200300,
+ .end = 0x20200300 + 16,
+ .flags = IORESOURCE_MEM,
+ },{
+ .start = IRQ_PF0,
+ .end = IRQ_PF0,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+ },
+};
+static struct platform_device smc91x_device = {
+ .name = "smc91x",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(smc91x_resources),
+ .resource = smc91x_resources,
+};
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+static struct resource bfin_uart_resources[] = {
+ {
+ .start = 0xFFC00400,
+ .end = 0xFFC004FF,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device bfin_uart_device = {
+ .name = "bfin-uart",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(bfin_uart_resources),
+ .resource = bfin_uart_resources,
+};
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+static struct platform_device bfin_sport0_uart_device = {
+ .name = "bfin-sport-uart",
+ .id = 0,
+};
+
+static struct platform_device bfin_sport1_uart_device = {
+ .name = "bfin-sport-uart",
+ .id = 1,
+};
+#endif
+
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+static struct resource isp1362_hcd_resources[] = {
+ {
+ .start = 0x20308000,
+ .end = 0x20308000,
+ .flags = IORESOURCE_MEM,
+ },{
+ .start = 0x20308004,
+ .end = 0x20308004,
+ .flags = IORESOURCE_MEM,
+ },{
+ .start = IRQ_PF4,
+ .end = IRQ_PF4,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct isp1362_platform_data isp1362_priv = {
+ .sel15Kres = 1,
+ .clknotstop = 0,
+ .oc_enable = 0,
+ .int_act_high = 0,
+ .int_edge_triggered = 0,
+ .remote_wakeup_connected = 0,
+ .no_power_switching = 1,
+ .power_switching_mode = 0,
+};
+
+static struct platform_device isp1362_hcd_device = {
+ .name = "isp1362-hcd",
+ .id = 0,
+ .dev = {
+ .platform_data = &isp1362_priv,
+ },
+ .num_resources = ARRAY_SIZE(isp1362_hcd_resources),
+ .resource = isp1362_hcd_resources,
+};
+#endif
+
+static struct platform_device *cm_bf533_devices[] __initdata = {
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+ &bfin_uart_device,
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+ &bfin_sport0_uart_device,
+ &bfin_sport1_uart_device,
+#endif
+
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+ &rtc_device,
+#endif
+
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+ &isp1362_hcd_device,
+#endif
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+ &smc91x_device,
+#endif
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+ &spi_bfin_master_device,
+#endif
+};
+
+static int __init cm_bf533_init(void)
+{
+ printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__);
+ platform_add_devices(cm_bf533_devices, ARRAY_SIZE(cm_bf533_devices));
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+ spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
+#endif
+ return 0;
+}
+
+arch_initcall(cm_bf533_init);
diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c
new file mode 100644
index 0000000..747298e
--- /dev/null
+++ b/arch/blackfin/mach-bf533/boards/ezkit.c
@@ -0,0 +1,224 @@
+/*
+ * File: arch/blackfin/mach-bf533/ezkit.c
+ * Based on: Orginal Work
+ * Author: Aidan Williams <aidan@nicta.com.au>
+ *
+ * Created: 2005
+ * Description:
+ *
+ * Modified: Robin Getz <rgetz@blackfin.uclinux.org> - Named the boards
+ * Copyright 2005 National ICT Australia (NICTA)
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#include <linux/usb_isp1362.h>
+#include <asm/irq.h>
+#include <asm/bfin5xx_spi.h>
+
+/*
+ * Name the Board for the /proc/cpuinfo
+ */
+char *bfin_board_name = "ADDS-BF533-EZKIT";
+
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+static struct platform_device rtc_device = {
+ .name = "rtc-bfin",
+ .id = -1,
+};
+#endif
+
+/*
+ * USB-LAN EzExtender board
+ * Driver needs to know address, irq and flag pin.
+ */
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+static struct resource smc91x_resources[] = {
+ {
+ .name = "smc91x-regs",
+ .start = 0x20310300,
+ .end = 0x20310300 + 16,
+ .flags = IORESOURCE_MEM,
+ },{
+ .start = IRQ_PF9,
+ .end = IRQ_PF9,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+ },
+};
+static struct platform_device smc91x_device = {
+ .name = "smc91x",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(smc91x_resources),
+ .resource = smc91x_resources,
+};
+#endif
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+/* all SPI peripherals info goes here */
+
+#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+static struct mtd_partition bfin_spi_flash_partitions[] = {
+ {
+ .name = "bootloader",
+ .size = 0x00020000,
+ .offset = 0,
+ .mask_flags = MTD_CAP_ROM
+ },{
+ .name = "kernel",
+ .size = 0xe0000,
+ .offset = 0x20000
+ },{
+ .name = "file system",
+ .size = 0x700000,
+ .offset = 0x00100000,
+ }
+};
+
+static struct flash_platform_data bfin_spi_flash_data = {
+ .name = "m25p80",
+ .parts = bfin_spi_flash_partitions,
+ .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
+ .type = "m25p64",
+};
+
+/* SPI flash chip (m25p64) */
+static struct bfin5xx_spi_chip spi_flash_chip_info = {
+ .enable_dma = 0, /* use dma transfer with this chip*/
+ .bits_per_word = 8,
+};
+#endif
+
+#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+/* SPI ADC chip */
+static struct bfin5xx_spi_chip spi_adc_chip_info = {
+ .enable_dma = 1, /* use dma transfer with this chip*/
+ .bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
+ .enable_dma = 0,
+ .bits_per_word = 16,
+};
+#endif
+
+static struct spi_board_info bfin_spi_board_info[] __initdata = {
+#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+ {
+ /* the modalias must be the same as spi device driver name */
+ .modalias = "m25p80", /* Name of spi_driver for this device */
+ .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1, /* Framework bus number */
+ .chip_select = 2, /* Framework chip select. On STAMP537 it is SPISSEL2*/
+ .platform_data = &bfin_spi_flash_data,
+ .controller_data = &spi_flash_chip_info,
+ .mode = SPI_MODE_3,
+ },
+#endif
+
+#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+ {
+ .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
+ .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1, /* Framework bus number */
+ .chip_select = 1, /* Framework chip select. */
+ .platform_data = NULL, /* No spi_driver specific config */
+ .controller_data = &spi_adc_chip_info,
+ },
+#endif
+
+#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+ {
+ .modalias = "ad1836-spi",
+ .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1,
+ .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
+ .controller_data = &ad1836_spi_chip_info,
+ },
+#endif
+};
+
+/* SPI controller data */
+static struct bfin5xx_spi_master spi_bfin_master_info = {
+ .num_chipselect = 8,
+ .enable_dma = 1, /* master has the ability to do dma transfer */
+};
+
+static struct platform_device spi_bfin_master_device = {
+ .name = "bfin-spi-master",
+ .id = 1, /* Bus number */
+ .dev = {
+ .platform_data = &spi_bfin_master_info, /* Passed to driver */
+ },
+};
+#endif /* spi master and devices */
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+static struct resource bfin_uart_resources[] = {
+ {
+ .start = 0xFFC00400,
+ .end = 0xFFC004FF,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device bfin_uart_device = {
+ .name = "bfin-uart",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(bfin_uart_resources),
+ .resource = bfin_uart_resources,
+};
+#endif
+
+static struct platform_device *ezkit_devices[] __initdata = {
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+ &smc91x_device,
+#endif
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+ &spi_bfin_master_device,
+#endif
+
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+ &rtc_device,
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+ &bfin_uart_device,
+#endif
+};
+
+static int __init ezkit_init(void)
+{
+ printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__);
+ platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices));
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+ spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
+#endif
+ return 0;
+}
+
+arch_initcall(ezkit_init);
diff --git a/arch/blackfin/mach-bf533/boards/generic_board.c b/arch/blackfin/mach-bf533/boards/generic_board.c
new file mode 100644
index 0000000..c0f43cc
--- /dev/null
+++ b/arch/blackfin/mach-bf533/boards/generic_board.c
@@ -0,0 +1,95 @@
+/*
+ * File: arch/blackfin/mach-bf533/generic_board.c
+ * Based on: arch/blackfin/mach-bf533/ezkit.c
+ * Author: Aidan Williams <aidan@nicta.com.au>
+ *
+ * Created: 2005
+ * Description:
+ *
+ * Modified:
+ * Copyright 2005 National ICT Australia (NICTA)
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <asm/irq.h>
+
+/*
+ * Name the Board for the /proc/cpuinfo
+ */
+char *bfin_board_name = "UNKNOWN BOARD";
+
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+static struct platform_device rtc_device = {
+ .name = "rtc-bfin",
+ .id = -1,
+};
+#endif
+
+/*
+ * Driver needs to know address, irq and flag pin.
+ */
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+static struct resource smc91x_resources[] = {
+ {
+ .start = 0x20300300,
+ .end = 0x20300300 + 16,
+ .flags = IORESOURCE_MEM,
+ },{
+ .start = IRQ_PROG_INTB,
+ .end = IRQ_PROG_INTB,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+ },{
+ /*
+ * denotes the flag pin and is used directly if
+ * CONFIG_IRQCHIP_DEMUX_GPIO is defined.
+ */
+ .start = IRQ_PF7,
+ .end = IRQ_PF7,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+ },
+};
+
+static struct platform_device smc91x_device = {
+ .name = "smc91x",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(smc91x_resources),
+ .resource = smc91x_resources,
+};
+#endif
+
+static struct platform_device *generic_board_devices[] __initdata = {
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+ &rtc_device,
+#endif
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+ &smc91x_device,
+#endif
+};
+
+static int __init generic_board_init(void)
+{
+ printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__);
+ return platform_add_devices(generic_board_devices, ARRAY_SIZE(generic_board_devices));
+}
+
+arch_initcall(generic_board_init);
diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c
new file mode 100644
index 0000000..d7b3a5d
--- /dev/null
+++ b/arch/blackfin/mach-bf533/boards/stamp.c
@@ -0,0 +1,321 @@
+/*
+ * File: arch/blackfin/mach-bf533/stamp.c
+ * Based on: arch/blackfin/mach-bf533/ezkit.c
+ * Author: Aidan Williams <aidan@nicta.com.au>
+ *
+ * Created: 2005
+ * Description: Board Info File for the BF533-STAMP
+ *
+ * Modified:
+ * Copyright 2005 National ICT Australia (NICTA)
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#include <linux/usb_isp1362.h>
+#endif
+#include <asm/irq.h>
+#include <asm/bfin5xx_spi.h>
+
+/*
+ * Name the Board for the /proc/cpuinfo
+ */
+char *bfin_board_name = "ADDS-BF533-STAMP";
+
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+static struct platform_device rtc_device = {
+ .name = "rtc-bfin",
+ .id = -1,
+};
+#endif
+
+/*
+ * Driver needs to know address, irq and flag pin.
+ */
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+static struct resource smc91x_resources[] = {
+ {
+ .name = "smc91x-regs",
+ .start = 0x20300300,
+ .end = 0x20300300 + 16,
+ .flags = IORESOURCE_MEM,
+ },{
+ .start = IRQ_PF7,
+ .end = IRQ_PF7,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+ },
+};
+
+static struct platform_device smc91x_device = {
+ .name = "smc91x",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(smc91x_resources),
+ .resource = smc91x_resources,
+};
+#endif
+
+#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+static struct resource net2272_bfin_resources[] = {
+ {
+ .start = 0x20300000,
+ .end = 0x20300000 + 0x100,
+ .flags = IORESOURCE_MEM,
+ },{
+ .start = IRQ_PF10,
+ .end = IRQ_PF10,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+ },
+};
+
+static struct platform_device net2272_bfin_device = {
+ .name = "net2272",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(net2272_bfin_resources),
+ .resource = net2272_bfin_resources,
+};
+#endif
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+/* all SPI peripherals info goes here */
+
+#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+static struct mtd_partition bfin_spi_flash_partitions[] = {
+ {
+ .name = "bootloader",
+ .size = 0x00020000,
+ .offset = 0,
+ .mask_flags = MTD_CAP_ROM
+ },{
+ .name = "kernel",
+ .size = 0xe0000,
+ .offset = 0x20000
+ },{
+ .name = "file system",
+ .size = 0x700000,
+ .offset = 0x00100000,
+ }
+};
+
+static struct flash_platform_data bfin_spi_flash_data = {
+ .name = "m25p80",
+ .parts = bfin_spi_flash_partitions,
+ .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
+ .type = "m25p64",
+};
+
+/* SPI flash chip (m25p64) */
+static struct bfin5xx_spi_chip spi_flash_chip_info = {
+ .enable_dma = 0, /* use dma transfer with this chip*/
+ .bits_per_word = 8,
+};
+#endif
+
+#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+/* SPI ADC chip */
+static struct bfin5xx_spi_chip spi_adc_chip_info = {
+ .enable_dma = 1, /* use dma transfer with this chip*/
+ .bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
+ .enable_dma = 0,
+ .bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_PBX)
+static struct bfin5xx_spi_chip spi_si3xxx_chip_info = {
+ .ctl_reg = 0x4, /* send zero */
+ .enable_dma = 0,
+ .bits_per_word = 8,
+ .cs_change_per_word = 1,
+};
+#endif
+
+#if defined(CONFIG_AD5304) || defined(CONFIG_AD5304_MODULE)
+static struct bfin5xx_spi_chip ad5304_chip_info = {
+ .enable_dma = 0,
+ .bits_per_word = 16,
+};
+#endif
+
+static struct spi_board_info bfin_spi_board_info[] __initdata = {
+#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+ {
+ /* the modalias must be the same as spi device driver name */
+ .modalias = "m25p80", /* Name of spi_driver for this device */
+ .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1, /* Framework bus number */
+ .chip_select = 2, /* Framework chip select. On STAMP537 it is SPISSEL2*/
+ .platform_data = &bfin_spi_flash_data,
+ .controller_data = &spi_flash_chip_info,
+ .mode = SPI_MODE_3,
+ },
+#endif
+
+#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+ {
+ .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
+ .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1, /* Framework bus number */
+ .chip_select = 1, /* Framework chip select. */
+ .platform_data = NULL, /* No spi_driver specific config */
+ .controller_data = &spi_adc_chip_info,
+ },
+#endif
+
+#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+ {
+ .modalias = "ad1836-spi",
+ .max_speed_hz = 31250000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1,
+ .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
+ .controller_data = &ad1836_spi_chip_info,
+ },
+#endif
+
+#if defined(CONFIG_PBX)
+ {
+ .modalias = "fxs-spi",
+ .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1,
+ .chip_select = 3,
+ .controller_data= &spi_si3xxx_chip_info,
+ .mode = SPI_MODE_3,
+ },
+ {
+ .modalias = "fxo-spi",
+ .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1,
+ .chip_select = 2,
+ .controller_data= &spi_si3xxx_chip_info,
+ .mode = SPI_MODE_3,
+ },
+#endif
+
+#if defined(CONFIG_AD5304) || defined(CONFIG_AD5304_MODULE)
+ {
+ .modalias = "ad5304_spi",
+ .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1,
+ .chip_select = 2,
+ .platform_data = NULL,
+ .controller_data = &ad5304_chip_info,
+ .mode = SPI_MODE_2,
+ },
+#endif
+};
+
+/* SPI controller data */
+static struct bfin5xx_spi_master spi_bfin_master_info = {
+ .num_chipselect = 8,
+ .enable_dma = 1, /* master has the ability to do dma transfer */
+};
+
+static struct platform_device spi_bfin_master_device = {
+ .name = "bfin-spi-master",
+ .id = 1, /* Bus number */
+ .dev = {
+ .platform_data = &spi_bfin_master_info, /* Passed to driver */
+ },
+};
+#endif /* spi master and devices */
+
+#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
+static struct platform_device bfin_fb_device = {
+ .name = "bf537-fb",
+};
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+static struct resource bfin_uart_resources[] = {
+ {
+ .start = 0xFFC00400,
+ .end = 0xFFC004FF,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device bfin_uart_device = {
+ .name = "bfin-uart",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(bfin_uart_resources),
+ .resource = bfin_uart_resources,
+};
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+static struct platform_device bfin_sport0_uart_device = {
+ .name = "bfin-sport-uart",
+ .id = 0,
+};
+
+static struct platform_device bfin_sport1_uart_device = {
+ .name = "bfin-sport-uart",
+ .id = 1,
+};
+#endif
+
+static struct platform_device *stamp_devices[] __initdata = {
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+ &rtc_device,
+#endif
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+ &smc91x_device,
+#endif
+
+#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+ &net2272_bfin_device,
+#endif
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+ &spi_bfin_master_device,
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+ &bfin_uart_device,
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+ &bfin_sport0_uart_device,
+ &bfin_sport1_uart_device,
+#endif
+};
+
+static int __init stamp_init(void)
+{
+ printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__);
+ platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+ spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
+#endif
+ return 0;
+}
+
+arch_initcall(stamp_init);
diff --git a/arch/blackfin/mach-bf533/cpu.c b/arch/blackfin/mach-bf533/cpu.c
new file mode 100644
index 0000000..99547c4
--- /dev/null
+++ b/arch/blackfin/mach-bf533/cpu.c
@@ -0,0 +1,161 @@
+/*
+ * File: arch/blackfin/mach-bf533/cpu.c
+ * Based on:
+ * Author: michael.kang@analog.com
+ *
+ * Created:
+ * Description: clock scaling for the bf533
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/cpufreq.h>
+#include <asm/dpmc.h>
+#include <linux/fs.h>
+#include <asm/bfin-global.h>
+
+/* CONFIG_CLKIN_HZ=11059200 */
+#define VCO5 (CONFIG_CLKIN_HZ*45) /*497664000 */
+#define VCO4 (CONFIG_CLKIN_HZ*36) /*398131200 */
+#define VCO3 (CONFIG_CLKIN_HZ*27) /*298598400 */
+#define VCO2 (CONFIG_CLKIN_HZ*18) /*199065600 */
+#define VCO1 (CONFIG_CLKIN_HZ*9) /*99532800 */
+#define VCO(x) VCO##x
+
+#define FREQ(x) {VCO(x),VCO(x)/4},{VCO(x),VCO(x)/2},{VCO(x),VCO(x)}
+/* frequency */
+static struct cpufreq_frequency_table bf533_freq_table[] = {
+ FREQ(1),
+ FREQ(3),
+ {VCO4, VCO4 / 2}, {VCO4, VCO4},
+ FREQ(5),
+ {0, CPUFREQ_TABLE_END},
+};
+
+/*
+ * dpmc_fops->ioctl()
+ * static int dpmc_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
+ */
+static int bf533_getfreq(unsigned int cpu)
+{
+ unsigned long cclk_mhz, vco_mhz;
+
+ /* The driver only support single cpu */
+ if (cpu == 0)
+ dpmc_fops.ioctl(NULL, NULL, IOCTL_GET_CORECLOCK, &cclk_mhz);
+ else
+ cclk_mhz = -1;
+ return cclk_mhz;
+}
+
+static int bf533_target(struct cpufreq_policy *policy,
+ unsigned int target_freq, unsigned int relation)
+{
+ unsigned long cclk_mhz;
+ unsigned long vco_mhz;
+ unsigned long flags;
+ unsigned int index, vco_index;
+ int i;
+
+ struct cpufreq_freqs freqs;
+ if (cpufreq_frequency_table_target
+ (policy, bf533_freq_table, target_freq, relation, &index))
+ return -EINVAL;
+ cclk_mhz = bf533_freq_table[index].frequency;
+ vco_mhz = bf533_freq_table[index].index;
+
+ dpmc_fops.ioctl(NULL, NULL, IOCTL_CHANGE_FREQUENCY, &vco_mhz);
+ freqs.old = bf533_getfreq(0);
+ freqs.new = cclk_mhz;
+ freqs.cpu = 0;
+
+ pr_debug("cclk begin change to cclk %d,vco=%d,index=%d,target=%d,oldfreq=%d\n",
+ cclk_mhz, vco_mhz, index, target_freq, freqs.old);
+
+ cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+ local_irq_save(flags);
+ dpmc_fops.ioctl(NULL, NULL, IOCTL_SET_CCLK, &cclk_mhz);
+ local_irq_restore(flags);
+ cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+
+ vco_mhz = get_vco();
+ cclk_mhz = get_cclk();
+ return 0;
+}
+
+/* make sure that only the "userspace" governor is run -- anything else wouldn't make sense on
+ * this platform, anyway.
+ */
+static int bf533_verify_speed(struct cpufreq_policy *policy)
+{
+ return cpufreq_frequency_table_verify(policy, &bf533_freq_table);
+}
+
+static int __init __bf533_cpu_init(struct cpufreq_policy *policy)
+{
+ int result;
+
+ if (policy->cpu != 0)
+ return -EINVAL;
+
+ policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
+
+ policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
+ /*Now ,only support one cpu */
+ policy->cur = bf533_getfreq(0);
+ cpufreq_frequency_table_get_attr(bf533_freq_table, policy->cpu);
+ return cpufreq_frequency_table_cpuinfo(policy, bf533_freq_table);
+}
+
+static struct freq_attr *bf533_freq_attr[] = {
+ &cpufreq_freq_attr_scaling_available_freqs,
+ NULL,
+};
+
+static struct cpufreq_driver bf533_driver = {
+ .verify = bf533_verify_speed,
+ .target = bf533_target,
+ .get = bf533_getfreq,
+ .init = __bf533_cpu_init,
+ .name = "bf533",
+ .owner = THIS_MODULE,
+ .attr = bf533_freq_attr,
+};
+
+static int __init bf533_cpu_init(void)
+{
+ return cpufreq_register_driver(&bf533_driver);
+}
+
+static void __exit bf533_cpu_exit(void)
+{
+ cpufreq_unregister_driver(&bf533_driver);
+}
+
+MODULE_AUTHOR("Mickael Kang");
+MODULE_DESCRIPTION("cpufreq driver for BF533 CPU");
+MODULE_LICENSE("GPL");
+
+module_init(bf533_cpu_init);
+module_exit(bf533_cpu_exit);
diff --git a/arch/blackfin/mach-bf533/head.S b/arch/blackfin/mach-bf533/head.S
new file mode 100644
index 0000000..4808edb
--- /dev/null
+++ b/arch/blackfin/mach-bf533/head.S
@@ -0,0 +1,774 @@
+/*
+ * File: arch/blackfin/mach-bf533/head.S
+ * Based on:
+ * Author: Jeff Dionne <jeff@uclinux.org> COPYRIGHT 1998 D. Jeff Dionne
+ *
+ * Created: 1998
+ * Description: bf533 startup file
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/linkage.h>
+#include <asm/blackfin.h>
+#if CONFIG_BFIN_KERNEL_CLOCK
+#include <asm/mach/mem_init.h>
+#endif
+#if CONFIG_DEBUG_KERNEL_START
+#include <asm/mach-common/def_LPBlackfin.h>
+#endif
+
+.global __rambase
+.global __ramstart
+.global __ramend
+.extern ___bss_stop
+.extern ___bss_start
+.extern _bf53x_relocate_l1_mem
+
+#define INITIAL_STACK 0xFFB01000
+
+.text
+
+ENTRY(__start)
+ENTRY(__stext)
+ /* R0: argument of command line string, passed from uboot, save it */
+ R7 = R0;
+ /* Set the SYSCFG register */
+ R0 = 0x36;
+ /*Enable Cycle Counter and Nesting Of Interrupts(3rd Bit)*/
+ SYSCFG = R0;
+ R0 = 0;
+
+ /*Clear Out All the data and pointer Registers*/
+ R1 = R0;
+ R2 = R0;
+ R3 = R0;
+ R4 = R0;
+ R5 = R0;
+ R6 = R0;
+
+ P0 = R0;
+ P1 = R0;
+ P2 = R0;
+ P3 = R0;
+ P4 = R0;
+ P5 = R0;
+
+ LC0 = r0;
+ LC1 = r0;
+ L0 = r0;
+ L1 = r0;
+ L2 = r0;
+ L3 = r0;
+
+ /* Clear Out All the DAG Registers*/
+ B0 = r0;
+ B1 = r0;
+ B2 = r0;
+ B3 = r0;
+
+ I0 = r0;
+ I1 = r0;
+ I2 = r0;
+ I3 = r0;
+
+ M0 = r0;
+ M1 = r0;
+ M2 = r0;
+ M3 = r0;
+
+#if CONFIG_DEBUG_KERNEL_START
+
+/*
+ * Set up a temporary Event Vector Table, so if something bad happens before
+ * the kernel is fully started, it doesn't vector off into the bootloaders
+ * table
+ */
+ P0.l = lo(EVT2);
+ P0.h = hi(EVT2);
+ P1.l = lo(EVT15);
+ P1.h = hi(EVT15);
+ P2.l = debug_kernel_start_trap;
+ P2.h = debug_kernel_start_trap;
+
+ RTS = P2;
+ RTI = P2;
+ RTX = P2;
+ RTN = P2;
+ RTE = P2;
+
+.Lfill_temp_vector_table:
+ [P0++] = P2; /* Core Event Vector Table */
+ CC = P0 == P1;
+ if !CC JUMP .Lfill_temp_vector_table
+ P0 = r0;
+ P1 = r0;
+ P2 = r0;
+
+#endif
+
+ p0.h = hi(FIO_MASKA_C);
+ p0.l = lo(FIO_MASKA_C);
+ r0 = 0xFFFF(Z);
+ w[p0] = r0.L; /* Disable all interrupts */
+ ssync;
+
+ p0.h = hi(FIO_MASKB_C);
+ p0.l = lo(FIO_MASKB_C);
+ r0 = 0xFFFF(Z);
+ w[p0] = r0.L; /* Disable all interrupts */
+ ssync;
+
+ /* Turn off the icache */
+ p0.l = (IMEM_CONTROL & 0xFFFF);
+ p0.h = (IMEM_CONTROL >> 16);
+ R1 = [p0];
+ R0 = ~ENICPLB;
+ R0 = R0 & R1;
+
+ /* Anomaly 05000125 */
+#ifdef ANOMALY_05000125
+ CLI R2;
+ SSYNC;
+#endif
+ [p0] = R0;
+ SSYNC;
+#ifdef ANOMALY_05000125
+ STI R2;
+#endif
+
+ /* Turn off the dcache */
+ p0.l = (DMEM_CONTROL & 0xFFFF);
+ p0.h = (DMEM_CONTROL >> 16);
+ R1 = [p0];
+ R0 = ~ENDCPLB;
+ R0 = R0 & R1;
+
+ /* Anomaly 05000125 */
+#ifdef ANOMALY_05000125
+ CLI R2;
+ SSYNC;
+#endif
+ [p0] = R0;
+ SSYNC;
+#ifdef ANOMALY_05000125
+ STI R2;
+#endif
+
+ /* Initialise UART */
+ p0.h = hi(UART_LCR);
+ p0.l = lo(UART_LCR);
+ r0 = 0x0(Z);
+ w[p0] = r0.L; /* To enable DLL writes */
+ ssync;
+
+ p0.h = hi(UART_DLL);
+ p0.l = lo(UART_DLL);
+ r0 = 0x0(Z);
+ w[p0] = r0.L;
+ ssync;
+
+ p0.h = hi(UART_DLH);
+ p0.l = lo(UART_DLH);
+ r0 = 0x00(Z);
+ w[p0] = r0.L;
+ ssync;
+
+ p0.h = hi(UART_GCTL);
+ p0.l = lo(UART_GCTL);
+ r0 = 0x0(Z);
+ w[p0] = r0.L; /* To enable UART clock */
+ ssync;
+
+ /* Initialize stack pointer */
+ sp.l = lo(INITIAL_STACK);
+ sp.h = hi(INITIAL_STACK);
+ fp = sp;
+ usp = sp;
+
+ /* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */
+ call _bf53x_relocate_l1_mem;
+#if CONFIG_BFIN_KERNEL_CLOCK
+ call _start_dma_code;
+#endif
+
+ /* Code for initializing Async memory banks */
+
+ p2.h = hi(EBIU_AMBCTL1);
+ p2.l = lo(EBIU_AMBCTL1);
+ r0.h = hi(AMBCTL1VAL);
+ r0.l = lo(AMBCTL1VAL);
+ [p2] = r0;
+ ssync;
+
+ p2.h = hi(EBIU_AMBCTL0);
+ p2.l = lo(EBIU_AMBCTL0);
+ r0.h = hi(AMBCTL0VAL);
+ r0.l = lo(AMBCTL0VAL);
+ [p2] = r0;
+ ssync;
+
+ p2.h = hi(EBIU_AMGCTL);
+ p2.l = lo(EBIU_AMGCTL);
+ r0 = AMGCTLVAL;
+ w[p2] = r0;
+ ssync;
+
+ /* This section keeps the processor in supervisor mode
+ * during kernel boot. Switches to user mode at end of boot.
+ * See page 3-9 of Hardware Reference manual for documentation.
+ */
+
+ /* EVT15 = _real_start */
+
+ p0.l = lo(EVT15);
+ p0.h = hi(EVT15);
+ p1.l = _real_start;
+ p1.h = _real_start;
+ [p0] = p1;
+ csync;
+
+ p0.l = lo(IMASK);
+ p0.h = hi(IMASK);
+ p1.l = IMASK_IVG15;
+ p1.h = 0x0;
+ [p0] = p1;
+ csync;
+
+ raise 15;
+ p0.l = .LWAIT_HERE;
+ p0.h = .LWAIT_HERE;
+ reti = p0;
+#if defined(ANOMALY_05000281)
+ nop; nop; nop;
+#endif
+ rti;
+
+.LWAIT_HERE:
+ jump .LWAIT_HERE;
+
+ENTRY(_real_start)
+ [ -- sp ] = reti;
+ p0.l = lo(WDOG_CTL);
+ p0.h = hi(WDOG_CTL);
+ r0 = 0xAD6(z);
+ w[p0] = r0; /* watchdog off for now */
+ ssync;
+
+ /* Code update for BSS size == 0
+ * Zero out the bss region.
+ */
+
+ p1.l = ___bss_start;
+ p1.h = ___bss_start;
+ p2.l = ___bss_stop;
+ p2.h = ___bss_stop;
+ r0 = 0;
+ p2 -= p1;
+ lsetup (.L_clear_bss, .L_clear_bss) lc0 = p2;
+.L_clear_bss:
+ B[p1++] = r0;
+
+ /* In case there is a NULL pointer reference
+ * Zero out region before stext
+ */
+
+ p1.l = 0x0;
+ p1.h = 0x0;
+ r0.l = __stext;
+ r0.h = __stext;
+ r0 = r0 >> 1;
+ p2 = r0;
+ r0 = 0;
+ lsetup (.L_clear_zero, .L_clear_zero) lc0 = p2;
+.L_clear_zero:
+ W[p1++] = r0;
+
+/* pass the uboot arguments to the global value command line */
+ R0 = R7;
+ call _cmdline_init;
+
+ p1.l = __rambase;
+ p1.h = __rambase;
+ r0.l = __sdata;
+ r0.h = __sdata;
+ [p1] = r0;
+
+ p1.l = __ramstart;
+ p1.h = __ramstart;
+ p3.l = ___bss_stop;
+ p3.h = ___bss_stop;
+
+ r1 = p3;
+ [p1] = r1;
+
+ /*
+ * load the current thread pointer and stack
+ */
+ r1.l = _init_thread_union;
+ r1.h = _init_thread_union;
+
+ r2.l = 0x2000;
+ r2.h = 0x0000;
+ r1 = r1 + r2;
+ sp = r1;
+ usp = sp;
+ fp = sp;
+ call _start_kernel;
+.L_exit:
+ jump.s .L_exit;
+
+.section .l1.text
+#if CONFIG_BFIN_KERNEL_CLOCK
+ENTRY(_start_dma_code)
+ p0.h = hi(SIC_IWR);
+ p0.l = lo(SIC_IWR);
+ r0.l = 0x1;
+ r0.h = 0x0;
+ [p0] = r0;
+ SSYNC;
+
+ /*
+ * Set PLL_CTL
+ * - [14:09] = MSEL[5:0] : CLKIN / VCO multiplication factors
+ * - [8] = BYPASS : BYPASS the PLL, run CLKIN into CCLK/SCLK
+ * - [7] = output delay (add 200ps of delay to mem signals)
+ * - [6] = input delay (add 200ps of input delay to mem signals)
+ * - [5] = PDWN : 1=All Clocks off
+ * - [3] = STOPCK : 1=Core Clock off
+ * - [1] = PLL_OFF : 1=Disable Power to PLL
+ * - [0] = DF : 1=Pass CLKIN/2 to PLL / 0=Pass CLKIN to PLL
+ * all other bits set to zero
+ */
+
+ p0.h = hi(PLL_LOCKCNT);
+ p0.l = lo(PLL_LOCKCNT);
+ r0 = 0x300(Z);
+ w[p0] = r0.l;
+ ssync;
+
+ P2.H = hi(EBIU_SDGCTL);
+ P2.L = lo(EBIU_SDGCTL);
+ R0 = [P2];
+ BITSET (R0, 24);
+ [P2] = R0;
+ SSYNC;
+
+ r0 = CONFIG_VCO_MULT & 63; /* Load the VCO multiplier */
+ r0 = r0 << 9; /* Shift it over, */
+ r1 = CLKIN_HALF; /* Do we need to divide CLKIN by 2?*/
+ r0 = r1 | r0;
+ r1 = PLL_BYPASS; /* Bypass the PLL? */
+ r1 = r1 << 8; /* Shift it over */
+ r0 = r1 | r0; /* add them all together */
+
+ p0.h = hi(PLL_CTL);
+ p0.l = lo(PLL_CTL); /* Load the address */
+ cli r2; /* Disable interrupts */
+ ssync;
+ w[p0] = r0.l; /* Set the value */
+ idle; /* Wait for the PLL to stablize */
+ sti r2; /* Enable interrupts */
+
+.Lcheck_again:
+ p0.h = hi(PLL_STAT);
+ p0.l = lo(PLL_STAT);
+ R0 = W[P0](Z);
+ CC = BITTST(R0,5);
+ if ! CC jump .Lcheck_again;
+
+ /* Configure SCLK & CCLK Dividers */
+ r0 = (CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV);
+ p0.h = hi(PLL_DIV);
+ p0.l = lo(PLL_DIV);
+ w[p0] = r0.l;
+ ssync;
+
+ p0.l = lo(EBIU_SDRRC);
+ p0.h = hi(EBIU_SDRRC);
+ r0 = mem_SDRRC;
+ w[p0] = r0.l;
+ ssync;
+
+ p0.l = (EBIU_SDBCTL & 0xFFFF);
+ p0.h = (EBIU_SDBCTL >> 16); /* SDRAM Memory Bank Control Register */
+ r0 = mem_SDBCTL;
+ w[p0] = r0.l;
+ ssync;
+
+ P2.H = hi(EBIU_SDGCTL);
+ P2.L = lo(EBIU_SDGCTL);
+ R0 = [P2];
+ BITCLR (R0, 24);
+ p0.h = hi(EBIU_SDSTAT);
+ p0.l = lo(EBIU_SDSTAT);
+ r2.l = w[p0];
+ cc = bittst(r2,3);
+ if !cc jump .Lskip;
+ NOP;
+ BITSET (R0, 23);
+.Lskip:
+ [P2] = R0;
+ SSYNC;
+
+ R0.L = lo(mem_SDGCTL);
+ R0.H = hi(mem_SDGCTL);
+ R1 = [p2];
+ R1 = R1 | R0;
+ [P2] = R1;
+ SSYNC;
+
+ p0.h = hi(SIC_IWR);
+ p0.l = lo(SIC_IWR);
+ r0.l = lo(IWR_ENABLE_ALL)
+ r0.h = hi(IWR_ENABLE_ALL)
+ [p0] = r0;
+ SSYNC;
+
+ RTS;
+#endif /* CONFIG_BFIN_KERNEL_CLOCK */
+
+ENTRY(_bfin_reset)
+ /* No more interrupts to be handled*/
+ CLI R6;
+ SSYNC;
+
+#if defined(CONFIG_BFIN_SHARED_FLASH_ENET)
+ p0.h = hi(FIO_INEN);
+ p0.l = lo(FIO_INEN);
+ r0.l = ~(1 << CONFIG_ENET_FLASH_PIN);
+ w[p0] = r0.l;
+
+ p0.h = hi(FIO_DIR);
+ p0.l = lo(FIO_DIR);
+ r0.l = (1 << CONFIG_ENET_FLASH_PIN);
+ w[p0] = r0.l;
+
+ p0.h = hi(FIO_FLAG_C);
+ p0.l = lo(FIO_FLAG_C);
+ r0.l = (1 << CONFIG_ENET_FLASH_PIN);
+ w[p0] = r0.l;
+#endif
+
+ /* Clear the bits 13-15 in SWRST if they werent cleared */
+ p0.h = hi(SWRST);
+ p0.l = lo(SWRST);
+ csync;
+ r0.l = w[p0];
+
+ /* Clear the IMASK register */
+ p0.h = hi(IMASK);
+ p0.l = lo(IMASK);
+ r0 = 0x0;
+ [p0] = r0;
+
+ /* Clear the ILAT register */
+ p0.h = hi(ILAT);
+ p0.l = lo(ILAT);
+ r0 = [p0];
+ [p0] = r0;
+ SSYNC;
+
+ /* Disable the WDOG TIMER */
+ p0.h = hi(WDOG_CTL);
+ p0.l = lo(WDOG_CTL);
+ r0.l = 0xAD6;
+ w[p0] = r0.l;
+ SSYNC;
+
+ /* Clear the sticky bit incase it is already set */
+ p0.h = hi(WDOG_CTL);
+ p0.l = lo(WDOG_CTL);
+ r0.l = 0x8AD6;
+ w[p0] = r0.l;
+ SSYNC;
+
+ /* Program the count value */
+ R0.l = 0x100;
+ R0.h = 0x0;
+ P0.h = hi(WDOG_CNT);
+ P0.l = lo(WDOG_CNT);
+ [P0] = R0;
+ SSYNC;
+
+ /* Program WDOG_STAT if necessary */
+ P0.h = hi(WDOG_CTL);
+ P0.l = lo(WDOG_CTL);
+ R0 = W[P0](Z);
+ CC = BITTST(R0,1);
+ if !CC JUMP .LWRITESTAT;
+ CC = BITTST(R0,2);
+ if !CC JUMP .LWRITESTAT;
+ JUMP .LSKIP_WRITE;
+
+.LWRITESTAT:
+ /* When watch dog timer is enabled, a write to STAT will load the contents of CNT to STAT */
+ R0 = 0x0000(z);
+ P0.h = hi(WDOG_STAT);
+ P0.l = lo(WDOG_STAT)
+ [P0] = R0;
+ SSYNC;
+
+.LSKIP_WRITE:
+ /* Enable the reset event */
+ P0.h = hi(WDOG_CTL);
+ P0.l = lo(WDOG_CTL);
+ R0 = W[P0](Z);
+ BITCLR(R0,1);
+ BITCLR(R0,2);
+ W[P0] = R0.L;
+ SSYNC;
+ NOP;
+
+ /* Enable the wdog counter */
+ R0 = W[P0](Z);
+ BITCLR(R0,4);
+ W[P0] = R0.L;
+ SSYNC;
+
+ IDLE;
+
+ RTS;
+
+#if CONFIG_DEBUG_KERNEL_START
+debug_kernel_start_trap:
+ /* Set up a temp stack in L1 - SDRAM might not be working */
+ P0.L = lo(L1_DATA_A_START + 0x100);
+ P0.H = hi(L1_DATA_A_START + 0x100);
+ SP = P0;
+
+ /* Make sure the Clocks are the way I think they should be */
+ r0 = CONFIG_VCO_MULT & 63; /* Load the VCO multiplier */
+ r0 = r0 << 9; /* Shift it over, */
+ r1 = CLKIN_HALF; /* Do we need to divide CLKIN by 2?*/
+ r0 = r1 | r0;
+ r1 = PLL_BYPASS; /* Bypass the PLL? */
+ r1 = r1 << 8; /* Shift it over */
+ r0 = r1 | r0; /* add them all together */
+
+ p0.h = hi(PLL_CTL);
+ p0.l = lo(PLL_CTL); /* Load the address */
+ cli r2; /* Disable interrupts */
+ ssync;
+ w[p0] = r0.l; /* Set the value */
+ idle; /* Wait for the PLL to stablize */
+ sti r2; /* Enable interrupts */
+
+.Lcheck_again1:
+ p0.h = hi(PLL_STAT);
+ p0.l = lo(PLL_STAT);
+ R0 = W[P0](Z);
+ CC = BITTST(R0,5);
+ if ! CC jump .Lcheck_again1;
+
+ /* Configure SCLK & CCLK Dividers */
+ r0 = (CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV);
+ p0.h = hi(PLL_DIV);
+ p0.l = lo(PLL_DIV);
+ w[p0] = r0.l;
+ ssync;
+
+ /* Make sure UART is enabled - you can never be sure */
+
+/*
+ * Setup for console. Argument comes from the menuconfig
+ */
+
+#ifdef CONFIG_BAUD_9600
+#define CONSOLE_BAUD_RATE 9600
+#elif CONFIG_BAUD_19200
+#define CONSOLE_BAUD_RATE 19200
+#elif CONFIG_BAUD_38400
+#define CONSOLE_BAUD_RATE 38400
+#elif CONFIG_BAUD_57600
+#define CONSOLE_BAUD_RATE 57600
+#elif CONFIG_BAUD_115200
+#define CONSOLE_BAUD_RATE 115200
+#endif
+
+ p0.h = hi(UART_GCTL);
+ p0.l = lo(UART_GCTL);
+ r0 = 0x00(Z);
+ w[p0] = r0.L; /* To Turn off UART clocks */
+ ssync;
+
+ p0.h = hi(UART_LCR);
+ p0.l = lo(UART_LCR);
+ r0 = 0x83(Z);
+ w[p0] = r0.L; /* To enable DLL writes */
+ ssync;
+
+ R1 = (((CONFIG_CLKIN_HZ * CONFIG_VCO_MULT) / CONFIG_SCLK_DIV) / (CONSOLE_BAUD_RATE * 16));
+
+ p0.h = hi(UART_DLL);
+ p0.l = lo(UART_DLL);
+ r0 = 0xFF(Z);
+ r0 = R1 & R0;
+ w[p0] = r0.L;
+ ssync;
+
+ p0.h = hi(UART_DLH);
+ p0.l = lo(UART_DLH);
+ r1 >>= 8 ;
+ w[p0] = r1.L;
+ ssync;
+
+ p0.h = hi(UART_GCTL);
+ p0.l = lo(UART_GCTL);
+ r0 = 0x0(Z);
+ w[p0] = r0.L; /* To enable UART clock */
+ ssync;
+
+ p0.h = hi(UART_LCR);
+ p0.l = lo(UART_LCR);
+ r0 = 0x03(Z);
+ w[p0] = r0.L; /* To Turn on UART */
+ ssync;
+
+ p0.h = hi(UART_GCTL);
+ p0.l = lo(UART_GCTL);
+ r0 = 0x01(Z);
+ w[p0] = r0.L; /* To Turn on UART Clocks */
+ ssync;
+
+ P0.h = hi(UART_THR);
+ P0.l = lo(UART_THR);
+ P1.h = hi(UART_LSR);
+ P1.l = lo(UART_LSR);
+
+ R0.L = 'K';
+ call .Lwait_char;
+ R0.L='e';
+ call .Lwait_char;
+ R0.L='r';
+ call .Lwait_char;
+ R0.L='n'
+ call .Lwait_char;
+ R0.L='e'
+ call .Lwait_char;
+ R0.L='l';
+ call .Lwait_char;
+ R0.L=' ';
+ call .Lwait_char;
+ R0.L='c';
+ call .Lwait_char;
+ R0.L='r';
+ call .Lwait_char;
+ R0.L='a';
+ call .Lwait_char;
+ R0.L='s';
+ call .Lwait_char;
+ R0.L='h';
+ call .Lwait_char;
+ R0.L='\r';
+ call .Lwait_char;
+ R0.L='\n';
+ call .Lwait_char;
+
+ R0.L='S';
+ call .Lwait_char;
+ R0.L='E';
+ call .Lwait_char;
+ R0.L='Q'
+ call .Lwait_char;
+ R0.L='S'
+ call .Lwait_char;
+ R0.L='T';
+ call .Lwait_char;
+ R0.L='A';
+ call .Lwait_char;
+ R0.L='T';
+ call .Lwait_char;
+ R0.L='=';
+ call .Lwait_char;
+ R2 = SEQSTAT;
+ call .Ldump_reg;
+
+ R0.L=' ';
+ call .Lwait_char;
+ R0.L='R';
+ call .Lwait_char;
+ R0.L='E'
+ call .Lwait_char;
+ R0.L='T'
+ call .Lwait_char;
+ R0.L='X';
+ call .Lwait_char;
+ R0.L='=';
+ call .Lwait_char;
+ R2 = RETX;
+ call .Ldump_reg;
+
+ R0.L='\r';
+ call .Lwait_char;
+ R0.L='\n';
+ call .Lwait_char;
+
+.Ldebug_kernel_start_trap_done:
+ JUMP .Ldebug_kernel_start_trap_done;
+.Ldump_reg:
+ R3 = 32;
+ R4 = 0x0F;
+ R5 = ':'; /* one past 9 */
+
+.Ldump_reg2:
+ R0 = R2;
+ R3 += -4;
+ R0 >>>= R3;
+ R0 = R0 & R4;
+ R0 += 0x30;
+ CC = R0 <= R5;
+ if CC JUMP .Ldump_reg1;
+ R0 += 7;
+
+.Ldump_reg1:
+ R1.l = W[P1];
+ CC = BITTST(R1, 5);
+ if !CC JUMP .Ldump_reg1;
+ W[P0] = r0;
+
+ CC = R3 == 0;
+ if !CC JUMP .Ldump_reg2
+ RTS;
+
+.Lwait_char:
+ R1.l = W[P1];
+ CC = BITTST(R1, 5);
+ if !CC JUMP .Lwait_char;
+ W[P0] = r0;
+ RTS;
+
+#endif /* CONFIG_DEBUG_KERNEL_START */
+
+.data
+
+/*
+ * Set up the usable of RAM stuff. Size of RAM is determined then
+ * an initial stack set up at the end.
+ */
+
+.align 4
+__rambase:
+.long 0
+__ramstart:
+.long 0
+__ramend:
+.long 0
diff --git a/arch/blackfin/mach-bf533/ints-priority.c b/arch/blackfin/mach-bf533/ints-priority.c
new file mode 100644
index 0000000..36a6933
--- /dev/null
+++ b/arch/blackfin/mach-bf533/ints-priority.c
@@ -0,0 +1,65 @@
+/*
+ * File: arch/blackfin/mach-bf533/ints-priority.c
+ * Based on:
+ * Author: Michael Hennerich
+ *
+ * Created: ?
+ * Description: Set up the interupt priorities
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/module.h>
+#include <asm/blackfin.h>
+#include <asm/irq.h>
+
+void program_IAR(void)
+{
+ /* Program the IAR0 Register with the configured priority */
+ bfin_write_SIC_IAR0(((CONFIG_PLLWAKE_ERROR - 7) << PLLWAKE_ERROR_POS) |
+ ((CONFIG_DMA_ERROR - 7) << DMA_ERROR_POS) |
+ ((CONFIG_PPI_ERROR - 7) << PPI_ERROR_POS) |
+ ((CONFIG_SPORT0_ERROR - 7) << SPORT0_ERROR_POS) |
+ ((CONFIG_SPI_ERROR - 7) << SPI_ERROR_POS) |
+ ((CONFIG_SPORT1_ERROR - 7) << SPORT1_ERROR_POS) |
+ ((CONFIG_UART_ERROR - 7) << UART_ERROR_POS) |
+ ((CONFIG_RTC_ERROR - 7) << RTC_ERROR_POS));
+
+ bfin_write_SIC_IAR1(((CONFIG_DMA0_PPI - 7) << DMA0_PPI_POS) |
+ ((CONFIG_DMA1_SPORT0RX - 7) << DMA1_SPORT0RX_POS) |
+ ((CONFIG_DMA2_SPORT0TX - 7) << DMA2_SPORT0TX_POS) |
+ ((CONFIG_DMA3_SPORT1RX - 7) << DMA3_SPORT1RX_POS) |
+ ((CONFIG_DMA4_SPORT1TX - 7) << DMA4_SPORT1TX_POS) |
+ ((CONFIG_DMA5_SPI - 7) << DMA5_SPI_POS) |
+ ((CONFIG_DMA6_UARTRX - 7) << DMA6_UARTRX_POS) |
+ ((CONFIG_DMA7_UARTTX - 7) << DMA7_UARTTX_POS));
+
+ bfin_write_SIC_IAR2(((CONFIG_TIMER0 - 7) << TIMER0_POS) |
+ ((CONFIG_TIMER1 - 7) << TIMER1_POS) |
+ ((CONFIG_TIMER2 - 7) << TIMER2_POS) |
+ ((CONFIG_PFA - 7) << PFA_POS) |
+ ((CONFIG_PFB - 7) << PFB_POS) |
+ ((CONFIG_MEMDMA0 - 7) << MEMDMA0_POS) |
+ ((CONFIG_MEMDMA1 - 7) << MEMDMA1_POS) |
+ ((CONFIG_WDTIMER - 7) << WDTIMER_POS));
+
+ SSYNC();
+}
diff --git a/arch/blackfin/mach-bf537/Kconfig b/arch/blackfin/mach-bf537/Kconfig
new file mode 100644
index 0000000..cc9ae38
--- /dev/null
+++ b/arch/blackfin/mach-bf537/Kconfig
@@ -0,0 +1,141 @@
+if (BF537 || BF534 || BF536)
+
+menu "BF537 Specific Configuration"
+
+comment "PORT F/G Selection"
+choice
+ prompt "Select BF537/6/4 default GPIO PFx PORTx"
+ help
+ Quick Hack for BF537/6/4 default GPIO PFx PORTF.
+
+config BF537_PORT_F
+ bool "Select BF537/6/4 default GPIO PFx PORTF"
+ depends on (BF537 || BF536 || BF534)
+ help
+ Quick Hack for BF537/6/4 default GPIO PFx PORTF.
+
+config BF537_PORT_G
+ bool "Select BF537/6/4 default GPIO PFx PORTG"
+ depends on (BF537 || BF536 || BF534)
+ help
+ Quick Hack for BF537/6/4 default GPIO PFx PORTG.
+
+config BF537_PORT_H
+ bool "Select BF537/6/4 default GPIO PFx PORTH"
+ depends on (BF537 || BF536 || BF534)
+ help
+ Quick Hack for BF537/6/4 default GPIO PFx PORTH
+ Use only when Blackfin EMAC support is not required.
+
+endchoice
+
+comment "Interrupt Priority Assignment"
+menu "Priority"
+
+config IRQ_PLL_WAKEUP
+ int "IRQ_PLL_WAKEUP"
+ default 7
+config IRQ_DMA_ERROR
+ int "IRQ_DMA_ERROR Generic"
+ default 7
+config IRQ_ERROR
+ int "IRQ_ERROR: CAN MAC SPORT0 SPORT1 SPI UART0 UART1"
+ default 7
+config IRQ_RTC
+ int "IRQ_RTC"
+ default 8
+config IRQ_PPI
+ int "IRQ_PPI"
+ default 8
+config IRQ_SPORT0_RX
+ int "IRQ_SPORT0_RX"
+ default 9
+config IRQ_SPORT0_TX
+ int "IRQ_SPORT0_TX"
+ default 9
+config IRQ_SPORT1_RX
+ int "IRQ_SPORT1_RX"
+ default 9
+config IRQ_SPORT1_TX
+ int "IRQ_SPORT1_TX"
+ default 9
+config IRQ_TWI
+ int "IRQ_TWI"
+ default 10
+config IRQ_SPI
+ int "IRQ_SPI"
+ default 10
+config IRQ_UART0_RX
+ int "IRQ_UART0_RX"
+ default 10
+config IRQ_UART0_TX
+ int "IRQ_UART0_TX"
+ default 10
+config IRQ_UART1_RX
+ int "IRQ_UART1_RX"
+ default 10
+config IRQ_UART1_TX
+ int "IRQ_UART1_TX"
+ default 10
+config IRQ_CAN_RX
+ int "IRQ_CAN_RX"
+ default 11
+config IRQ_CAN_TX
+ int "IRQ_CAN_TX"
+ default 11
+config IRQ_MAC_RX
+ int "IRQ_MAC_RX"
+ default 11
+config IRQ_MAC_TX
+ int "IRQ_MAC_TX"
+ default 11
+config IRQ_TMR0
+ int "IRQ_TMR0"
+ default 12
+config IRQ_TMR1
+ int "IRQ_TMR1"
+ default 12
+config IRQ_TMR2
+ int "IRQ_TMR2"
+ default 12
+config IRQ_TMR3
+ int "IRQ_TMR3"
+ default 12
+config IRQ_TMR4
+ int "IRQ_TMR4"
+ default 12
+config IRQ_TMR5
+ int "IRQ_TMR5"
+ default 12
+config IRQ_TMR6
+ int "IRQ_TMR6"
+ default 12
+config IRQ_TMR7
+ int "IRQ_TMR7"
+ default 12
+config IRQ_PROG_INTA
+ int "IRQ_PROG_INTA"
+ default 12
+config IRQ_PORTG_INTB
+ int "IRQ_PORTG_INTB"
+ default 12
+config IRQ_MEM_DMA0
+ int "IRQ_MEM_DMA0"
+ default 13
+config IRQ_MEM_DMA1
+ int "IRQ_MEM_DMA1"
+ default 13
+config IRQ_WATCH
+ int "IRQ_WATCH"
+ default 13
+
+ help
+ Enter the priority numbers between 7-13 ONLY. Others are Reserved.
+ This applies to all the above. It is not recommended to assign the
+ highest priority number 7 to UART or any other device.
+
+endmenu
+
+endmenu
+
+endif
diff --git a/arch/blackfin/mach-bf537/Makefile b/arch/blackfin/mach-bf537/Makefile
new file mode 100644
index 0000000..f32d442
--- /dev/null
+++ b/arch/blackfin/mach-bf537/Makefile
@@ -0,0 +1,9 @@
+#
+# arch/blackfin/mach-bf537/Makefile
+#
+
+extra-y := head.o
+
+obj-y := ints-priority.o
+
+obj-$(CONFIG_CPU_FREQ) += cpu.o
diff --git a/arch/blackfin/mach-bf537/boards/Makefile b/arch/blackfin/mach-bf537/boards/Makefile
new file mode 100644
index 0000000..23323ca
--- /dev/null
+++ b/arch/blackfin/mach-bf537/boards/Makefile
@@ -0,0 +1,9 @@
+#
+# arch/blackfin/mach-bf537/boards/Makefile
+#
+
+obj-y += eth_mac.o
+obj-$(CONFIG_GENERIC_BOARD) += generic_board.o
+obj-$(CONFIG_BFIN537_STAMP) += stamp.o led.o
+obj-$(CONFIG_BFIN537_BLUETECHNIX_CM) += cm_bf537.o
+obj-$(CONFIG_PNAV10) += pnav10.o
diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537.c b/arch/blackfin/mach-bf537/boards/cm_bf537.c
new file mode 100644
index 0000000..6a60618
--- /dev/null
+++ b/arch/blackfin/mach-bf537/boards/cm_bf537.c
@@ -0,0 +1,364 @@
+/*
+ * File: arch/blackfin/mach-bf537/boards/cm_bf537.c
+ * Based on: arch/blackfin/mach-bf533/boards/ezkit.c
+ * Author: Aidan Williams <aidan@nicta.com.au>
+ *
+ * Created: 2005
+ * Description: Board description file
+ *
+ * Modified:
+ * Copyright 2005 National ICT Australia (NICTA)
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#include <linux/usb_isp1362.h>
+#include <asm/irq.h>
+#include <asm/bfin5xx_spi.h>
+
+/*
+ * Name the Board for the /proc/cpuinfo
+ */
+char *bfin_board_name = "Bluetechnix CM BF537";
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+/* all SPI peripherals info goes here */
+
+#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+static struct mtd_partition bfin_spi_flash_partitions[] = {
+ {
+ .name = "bootloader",
+ .size = 0x00020000,
+ .offset = 0,
+ .mask_flags = MTD_CAP_ROM
+ },{
+ .name = "kernel",
+ .size = 0xe0000,
+ .offset = 0x20000
+ },{
+ .name = "file system",
+ .size = 0x700000,
+ .offset = 0x00100000,
+ }
+};
+
+static struct flash_platform_data bfin_spi_flash_data = {
+ .name = "m25p80",
+ .parts = bfin_spi_flash_partitions,
+ .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
+ .type = "m25p64",
+};
+
+/* SPI flash chip (m25p64) */
+static struct bfin5xx_spi_chip spi_flash_chip_info = {
+ .enable_dma = 0, /* use dma transfer with this chip*/
+ .bits_per_word = 8,
+};
+#endif
+
+#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+/* SPI ADC chip */
+static struct bfin5xx_spi_chip spi_adc_chip_info = {
+ .enable_dma = 1, /* use dma transfer with this chip*/
+ .bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
+ .enable_dma = 0,
+ .bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
+static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
+ .enable_dma = 0,
+ .bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+static struct bfin5xx_spi_chip spi_mmc_chip_info = {
+ .enable_dma = 1,
+ .bits_per_word = 8,
+};
+#endif
+
+static struct spi_board_info bfin_spi_board_info[] __initdata = {
+#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+ {
+ /* the modalias must be the same as spi device driver name */
+ .modalias = "m25p80", /* Name of spi_driver for this device */
+ .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1, /* Framework bus number */
+ .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
+ .platform_data = &bfin_spi_flash_data,
+ .controller_data = &spi_flash_chip_info,
+ .mode = SPI_MODE_3,
+ },
+#endif
+
+#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+ {
+ .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
+ .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1, /* Framework bus number */
+ .chip_select = 1, /* Framework chip select. */
+ .platform_data = NULL, /* No spi_driver specific config */
+ .controller_data = &spi_adc_chip_info,
+ },
+#endif
+
+#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+ {
+ .modalias = "ad1836-spi",
+ .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1,
+ .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
+ .controller_data = &ad1836_spi_chip_info,
+ },
+#endif
+
+#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
+ {
+ .modalias = "ad9960-spi",
+ .max_speed_hz = 10000000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1,
+ .chip_select = 1,
+ .controller_data = &ad9960_spi_chip_info,
+ },
+#endif
+
+#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+ {
+ .modalias = "spi_mmc_dummy",
+ .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1,
+ .chip_select = 7,
+ .platform_data = NULL,
+ .controller_data = &spi_mmc_chip_info,
+ .mode = SPI_MODE_3,
+ },
+ {
+ .modalias = "spi_mmc",
+ .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1,
+ .chip_select = CONFIG_SPI_MMC_CS_CHAN,
+ .platform_data = NULL,
+ .controller_data = &spi_mmc_chip_info,
+ .mode = SPI_MODE_3,
+ },
+#endif
+};
+
+/* SPI controller data */
+static struct bfin5xx_spi_master spi_bfin_master_info = {
+ .num_chipselect = 8,
+ .enable_dma = 1, /* master has the ability to do dma transfer */
+};
+
+static struct platform_device spi_bfin_master_device = {
+ .name = "bfin-spi-master",
+ .id = 1, /* Bus number */
+ .dev = {
+ .platform_data = &spi_bfin_master_info, /* Passed to driver */
+ },
+};
+#endif /* spi master and devices */
+
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+static struct platform_device rtc_device = {
+ .name = "rtc-bfin",
+ .id = -1,
+};
+#endif
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+static struct resource smc91x_resources[] = {
+ {
+ .start = 0x20200300,
+ .end = 0x20200300 + 16,
+ .flags = IORESOURCE_MEM,
+ },{
+ .start = IRQ_PF14,
+ .end = IRQ_PF14,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+ },
+};
+
+static struct platform_device smc91x_device = {
+ .name = "smc91x",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(smc91x_resources),
+ .resource = smc91x_resources,
+};
+#endif
+
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+static struct resource isp1362_hcd_resources[] = {
+ {
+ .start = 0x20308000,
+ .end = 0x20308000,
+ .flags = IORESOURCE_MEM,
+ },{
+ .start = 0x20308004,
+ .end = 0x20308004,
+ .flags = IORESOURCE_MEM,
+ },{
+ .start = IRQ_PG15,
+ .end = IRQ_PG15,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+ },
+};
+
+static struct isp1362_platform_data isp1362_priv = {
+ .sel15Kres = 1,
+ .clknotstop = 0,
+ .oc_enable = 0,
+ .int_act_high = 0,
+ .int_edge_triggered = 0,
+ .remote_wakeup_connected = 0,
+ .no_power_switching = 1,
+ .power_switching_mode = 0,
+};
+
+static struct platform_device isp1362_hcd_device = {
+ .name = "isp1362-hcd",
+ .id = 0,
+ .dev = {
+ .platform_data = &isp1362_priv,
+ },
+ .num_resources = ARRAY_SIZE(isp1362_hcd_resources),
+ .resource = isp1362_hcd_resources,
+};
+#endif
+
+#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+static struct resource net2272_bfin_resources[] = {
+ {
+ .start = 0x20200000,
+ .end = 0x20200000 + 0x100,
+ .flags = IORESOURCE_MEM,
+ },{
+ .start = IRQ_PF7,
+ .end = IRQ_PF7,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+ },
+};
+
+static struct platform_device net2272_bfin_device = {
+ .name = "net2272",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(net2272_bfin_resources),
+ .resource = net2272_bfin_resources,
+};
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+static struct resource bfin_uart_resources[] = {
+ {
+ .start = 0xFFC00400,
+ .end = 0xFFC004FF,
+ .flags = IORESOURCE_MEM,
+ },{
+ .start = 0xFFC02000,
+ .end = 0xFFC020FF,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device bfin_uart_device = {
+ .name = "bfin-uart",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(bfin_uart_resources),
+ .resource = bfin_uart_resources,
+};
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+static struct platform_device bfin_sport0_uart_device = {
+ .name = "bfin-sport-uart",
+ .id = 0,
+};
+
+static struct platform_device bfin_sport1_uart_device = {
+ .name = "bfin-sport-uart",
+ .id = 1,
+};
+#endif
+
+#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+static struct platform_device bfin_mac_device = {
+ .name = "bfin_mac",
+};
+#endif
+
+static struct platform_device *cm_bf537_devices[] __initdata = {
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+ &rtc_device,
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+ &bfin_uart_device,
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+ &bfin_sport0_uart_device,
+ &bfin_sport1_uart_device,
+#endif
+
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+ &isp1362_hcd_device,
+#endif
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+ &smc91x_device,
+#endif
+
+#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+ &bfin_mac_device,
+#endif
+
+#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+ &net2272_bfin_device,
+#endif
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+ &spi_bfin_master_device,
+#endif
+};
+
+static int __init cm_bf537_init(void)
+{
+ printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__);
+ platform_add_devices(cm_bf537_devices, ARRAY_SIZE(cm_bf537_devices));
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+ spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
+#endif
+ return 0;
+}
+
+arch_initcall(cm_bf537_init);
diff --git a/arch/blackfin/mach-bf537/boards/eth_mac.c b/arch/blackfin/mach-bf537/boards/eth_mac.c
new file mode 100644
index 0000000..e129a08
--- /dev/null
+++ b/arch/blackfin/mach-bf537/boards/eth_mac.c
@@ -0,0 +1,51 @@
+/*
+ * arch/blackfin/mach-bf537/board/eth_mac.c
+ *
+ * Copyright (C) 2007 Analog Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#include <linux/module.h>
+#include <asm/blackfin.h>
+
+#if defined(CONFIG_GENERIC_BOARD) \
+ || defined(CONFIG_BFIN537_STAMP)
+
+/*
+ * Currently the MAC address is saved in Flash by U-Boot
+ */
+#define FLASH_MAC 0x203f0000
+
+void get_bf537_ether_addr(char *addr)
+{
+ unsigned int flash_mac = (unsigned int) FLASH_MAC;
+ *(u32 *)(&(addr[0])) = bfin_read32(flash_mac);
+ flash_mac += 4;
+ *(u16 *)(&(addr[4])) = bfin_read16(flash_mac);
+}
+
+#else
+
+/*
+ * Provide MAC address function for other specific board setting
+ */
+void get_bf537_ether_addr(char *addr)
+{
+ printk(KERN_WARNING "%s: No valid Ethernet MAC address found\n",__FILE__);
+}
+
+#endif
+
+EXPORT_SYMBOL(get_bf537_ether_addr);
diff --git a/arch/blackfin/mach-bf537/boards/generic_board.c b/arch/blackfin/mach-bf537/boards/generic_board.c
new file mode 100644
index 0000000..9019c0e
--- /dev/null
+++ b/arch/blackfin/mach-bf537/boards/generic_board.c
@@ -0,0 +1,445 @@
+/*
+ * File: arch/blackfin/mach-bf537/boards/generic_board.c
+ * Based on: arch/blackfin/mach-bf533/boards/ezkit.c
+ * Author: Aidan Williams <aidan@nicta.com.au>
+ *
+ * Created:
+ * Description:
+ *
+ * Modified:
+ * Copyright 2005 National ICT Australia (NICTA)
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#include <linux/usb_isp1362.h>
+#include <asm/irq.h>
+#include <asm/bfin5xx_spi.h>
+#include <linux/usb_sl811.h>
+
+/*
+ * Name the Board for the /proc/cpuinfo
+ */
+char *bfin_board_name = "UNKNOWN BOARD";
+
+/*
+ * Driver needs to know address, irq and flag pin.
+ */
+
+#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
+static struct resource bfin_pcmcia_cf_resources[] = {
+ {
+ .start = 0x20310000, /* IO PORT */
+ .end = 0x20312000,
+ .flags = IORESOURCE_MEM,
+ },{
+ .start = 0x20311000, /* Attribute Memeory */
+ .end = 0x20311FFF,
+ .flags = IORESOURCE_MEM,
+ },{
+ .start = IRQ_PROG_INTA,
+ .end = IRQ_PROG_INTA,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+ },{
+ .start = IRQ_PF4,
+ .end = IRQ_PF4,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+ },{
+ .start = 6, /* Card Detect PF6 */
+ .end = 6,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device bfin_pcmcia_cf_device = {
+ .name = "bfin_cf_pcmcia",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(bfin_pcmcia_cf_resources),
+ .resource = bfin_pcmcia_cf_resources,
+};
+#endif
+
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+static struct platform_device rtc_device = {
+ .name = "rtc-bfin",
+ .id = -1,
+};
+#endif
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+static struct resource smc91x_resources[] = {
+ {
+ .name = "smc91x-regs",
+ .start = 0x20300300,
+ .end = 0x20300300 + 16,
+ .flags = IORESOURCE_MEM,
+ },{
+ .start = IRQ_PROG_INTB,
+ .end = IRQ_PROG_INTB,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+ },{
+ /*
+ * denotes the flag pin and is used directly if
+ * CONFIG_IRQCHIP_DEMUX_GPIO is defined.
+ */
+ .start = IRQ_PF7,
+ .end = IRQ_PF7,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+ },
+};
+static struct platform_device smc91x_device = {
+ .name = "smc91x",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(smc91x_resources),
+ .resource = smc91x_resources,
+};
+#endif
+
+#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
+static struct resource sl811_hcd_resources[] = {
+ {
+ .start = 0x20340000,
+ .end = 0x20340000,
+ .flags = IORESOURCE_MEM,
+ },{
+ .start = 0x20340004,
+ .end = 0x20340004,
+ .flags = IORESOURCE_MEM,
+ },{
+ .start = IRQ_PROG_INTA,
+ .end = IRQ_PROG_INTA,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+ },{
+ .start = IRQ_PF0 + CONFIG_USB_SL811_BFIN_GPIO,
+ .end = IRQ_PF0 + CONFIG_USB_SL811_BFIN_GPIO,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+ },
+};
+
+#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
+void sl811_port_power(struct device *dev, int is_on)
+{
+ unsigned short mask = (1<<CONFIG_USB_SL811_BFIN_GPIO_VBUS);
+
+ bfin_write_PORT_FER(bfin_read_PORT_FER() & ~mask);
+ bfin_write_FIO_DIR(bfin_read_FIO_DIR() | mask);
+
+ if (is_on)
+ bfin_write_FIO_FLAG_S(mask);
+ else
+ bfin_write_FIO_FLAG_C(mask);
+}
+#endif
+
+static struct sl811_platform_data sl811_priv = {
+ .potpg = 10,
+ .power = 250, /* == 500mA */
+#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
+ .port_power = &sl811_port_power,
+#endif
+};
+
+static struct platform_device sl811_hcd_device = {
+ .name = "sl811-hcd",
+ .id = 0,
+ .dev = {
+ .platform_data = &sl811_priv,
+ },
+ .num_resources = ARRAY_SIZE(sl811_hcd_resources),
+ .resource = sl811_hcd_resources,
+};
+
+#endif
+
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+static struct resource isp1362_hcd_resources[] = {
+ {
+ .start = 0x20360000,
+ .end = 0x20360000,
+ .flags = IORESOURCE_MEM,
+ },{
+ .start = 0x20360004,
+ .end = 0x20360004,
+ .flags = IORESOURCE_MEM,
+ },{
+ .start = IRQ_PROG_INTA,
+ .end = IRQ_PROG_INTA,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+ },{
+ .start = IRQ_PF0 + CONFIG_USB_ISP1362_BFIN_GPIO,
+ .end = IRQ_PF0 + CONFIG_USB_ISP1362_BFIN_GPIO,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct isp1362_platform_data isp1362_priv = {
+ .sel15Kres = 1,
+ .clknotstop = 0,
+ .oc_enable = 0,
+ .int_act_high = 0,
+ .int_edge_triggered = 0,
+ .remote_wakeup_connected = 0,
+ .no_power_switching = 1,
+ .power_switching_mode = 0,
+};
+
+static struct platform_device isp1362_hcd_device = {
+ .name = "isp1362-hcd",
+ .id = 0,
+ .dev = {
+ .platform_data = &isp1362_priv,
+ },
+ .num_resources = ARRAY_SIZE(isp1362_hcd_resources),
+ .resource = isp1362_hcd_resources,
+};
+#endif
+
+#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+static struct platform_device bfin_mac_device = {
+ .name = "bfin_mac",
+};
+#endif
+
+#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+static struct resource net2272_bfin_resources[] = {
+ {
+ .start = 0x20300000,
+ .end = 0x20300000 + 0x100,
+ .flags = IORESOURCE_MEM,
+ },{
+ .start = IRQ_PF7,
+ .end = IRQ_PF7,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+ },
+};
+
+static struct platform_device net2272_bfin_device = {
+ .name = "net2272",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(net2272_bfin_resources),
+ .resource = net2272_bfin_resources,
+};
+#endif
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+/* all SPI peripherals info goes here */
+
+#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+static struct mtd_partition bfin_spi_flash_partitions[] = {
+ {
+ .name = "bootloader",
+ .size = 0x00020000,
+ .offset = 0,
+ .mask_flags = MTD_CAP_ROM
+ },{
+ .name = "kernel",
+ .size = 0xe0000,
+ .offset = 0x20000
+ },{
+ .name = "file system",
+ .size = 0x700000,
+ .offset = 0x00100000,
+ }
+};
+
+static struct flash_platform_data bfin_spi_flash_data = {
+ .name = "m25p80",
+ .parts = bfin_spi_flash_partitions,
+ .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
+ .type = "m25p64",
+};
+
+/* SPI flash chip (m25p64) */
+static struct bfin5xx_spi_chip spi_flash_chip_info = {
+ .enable_dma = 0, /* use dma transfer with this chip*/
+ .bits_per_word = 8,
+};
+#endif
+
+#if defined(CONFIG_SPI_ADC_BF533) \
+ || defined(CONFIG_SPI_ADC_BF533_MODULE)
+/* SPI ADC chip */
+static struct bfin5xx_spi_chip spi_adc_chip_info = {
+ .enable_dma = 1, /* use dma transfer with this chip*/
+ .bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_SND_BLACKFIN_AD1836) \
+ || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
+ .enable_dma = 0,
+ .bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
+static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
+ .enable_dma = 0,
+ .bits_per_word = 16,
+};
+#endif
+
+static struct spi_board_info bfin_spi_board_info[] __initdata = {
+#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+ {
+ /* the modalias must be the same as spi device driver name */
+ .modalias = "m25p80", /* Name of spi_driver for this device */
+ .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1, /* Framework bus number */
+ .chip_select = 2, /* Framework chip select. On STAMP537 it is SPISSEL1*/
+ .platform_data = &bfin_spi_flash_data,
+ .controller_data = &spi_flash_chip_info,
+ .mode = SPI_MODE_3,
+ },
+#endif
+
+#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+ {
+ .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
+ .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1, /* Framework bus number */
+ .chip_select = 1, /* Framework chip select. */
+ .platform_data = NULL, /* No spi_driver specific config */
+ .controller_data = &spi_adc_chip_info,
+ },
+#endif
+
+#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+ {
+ .modalias = "ad1836-spi",
+ .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1,
+ .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
+ .controller_data = &ad1836_spi_chip_info,
+ },
+#endif
+
+#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
+ {
+ .modalias = "ad9960-spi",
+ .max_speed_hz = 10000000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1,
+ .chip_select = 1,
+ .controller_data = &ad9960_spi_chip_info,
+ },
+#endif
+};
+
+/* SPI controller data */
+static struct bfin5xx_spi_master spi_bfin_master_info = {
+ .num_chipselect = 8,
+ .enable_dma = 1, /* master has the ability to do dma transfer */
+};
+
+static struct platform_device spi_bfin_master_device = {
+ .name = "bfin-spi-master",
+ .id = 1, /* Bus number */
+ .dev = {
+ .platform_data = &spi_bfin_master_info, /* Passed to driver */
+ },
+};
+#endif /* spi master and devices */
+
+#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
+static struct platform_device bfin_fb_device = {
+ .name = "bf537-fb",
+};
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+static struct resource bfin_uart_resources[] = {
+ {
+ .start = 0xFFC00400,
+ .end = 0xFFC004FF,
+ .flags = IORESOURCE_MEM,
+ },{
+ .start = 0xFFC02000,
+ .end = 0xFFC020FF,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device bfin_uart_device = {
+ .name = "bfin-uart",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(bfin_uart_resources),
+ .resource = bfin_uart_resources,
+};
+#endif
+
+static struct platform_device *stamp_devices[] __initdata = {
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+ &rtc_device,
+#endif
+
+#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
+ &bfin_pcmcia_cf_device,
+#endif
+
+#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
+ &sl811_hcd_device,
+#endif
+
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+ &isp1362_hcd_device,
+#endif
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+ &smc91x_device,
+#endif
+
+#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+ &bfin_mac_device,
+#endif
+
+#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+ &net2272_bfin_device,
+#endif
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+ &spi_bfin_master_device,
+#endif
+
+#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
+ &bfin_fb_device,
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+ &bfin_uart_device,
+#endif
+};
+
+static int __init stamp_init(void)
+{
+ printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__);
+ platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+ spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
+#endif
+ return 0;
+}
+
+arch_initcall(stamp_init);
diff --git a/arch/blackfin/mach-bf537/boards/led.S b/arch/blackfin/mach-bf537/boards/led.S
new file mode 100644
index 0000000..4e9ea42
--- /dev/null
+++ b/arch/blackfin/mach-bf537/boards/led.S
@@ -0,0 +1,183 @@
+/****************************************************
+ * LED1 ---- PF6 LED2 ---- PF7 *
+ * LED3 ---- PF8 LED4 ---- PF9 *
+ * LED5 ---- PF10 LED6 ---- PF11 *
+ ****************************************************/
+
+#include <linux/linkage.h>
+#include <asm/blackfin.h>
+
+/* All functions in this file save the registers they uses.
+ So there is no need to save any registers before calling them. */
+
+ .text;
+
+/* Initialize LEDs. */
+
+ENTRY(_led_init)
+ LINK 12;
+ [--SP] = P0;
+ [--SP] = R0;
+ [--SP] = R1;
+ [--SP] = R2;
+ R1 = PF6|PF7|PF8|PF9|PF10|PF11 (Z);
+ R2 = ~R1;
+
+ P0.H = hi(PORTF_FER);
+ P0.L = lo(PORTF_FER);
+ R0 = W[P0](Z);
+ SSYNC;
+ R0 = R0 & R2;
+ W[P0] = R0.L;
+ SSYNC;
+
+ P0.H = hi(PORTFIO_DIR);
+ P0.L = lo(PORTFIO_DIR);
+ R0 = W[P0](Z);
+ SSYNC;
+ R0 = R0 | R1;
+ W[P0] = R0.L;
+ SSYNC;
+
+ P0.H = hi(PORTFIO_INEN);
+ P0.L = lo(PORTFIO_INEN);
+ R0 = W[P0](Z);
+ SSYNC;
+ R0 = R0 & R2;
+ W[P0] = R0.L;
+ SSYNC;
+
+ R2 = [SP++];
+ R1 = [SP++];
+ R0 = [SP++];
+ P0 = [SP++];
+ UNLINK;
+ RTS;
+ .size _led_init, .-_led_init
+
+/* Set one LED on. Leave other LEDs unchanged.
+ It expects the LED number passed through R0. */
+
+ENTRY(_led_on)
+ LINK 12;
+ [--SP] = P0;
+ [--SP] = R1;
+ CALL _led_init;
+ R1 = 1;
+ R0 += 5;
+ R1 <<= R0;
+ P0.H = hi(PORTFIO);
+ P0.L = lo(PORTFIO);
+ R0 = W[P0](Z);
+ SSYNC;
+ R0 = R0 | R1;
+ W[P0] = R0.L;
+ SSYNC;
+ R1 = [SP++];
+ P0 = [SP++];
+ UNLINK;
+ RTS;
+ .size _led_on, .-_led_on
+
+/* Set one LED off. Leave other LEDs unchanged. */
+
+ENTRY(_led_off)
+ LINK 12;
+ [--SP] = P0;
+ [--SP] = R1;
+ CALL _led_init;
+ R1 = 1;
+ R0 += 5;
+ R1 <<= R0;
+ R1 = ~R1;
+ P0.H = hi(PORTFIO);
+ P0.L = lo(PORTFIO);
+ R0 = W[P0](Z);
+ SSYNC;
+ R0 = R0 & R1;
+ W[P0] = R0.L;
+ SSYNC;
+ R1 = [SP++];
+ P0 = [SP++];
+ UNLINK;
+ RTS;
+ .size _led_off, .-_led_off
+
+/* Toggle one LED. Leave other LEDs unchanged. */
+
+ENTRY(_led_toggle)
+ LINK 12;
+ [--SP] = P0;
+ [--SP] = R1;
+ CALL _led_init;
+ R1 = 1;
+ R0 += 5;
+ R1 <<= R0;
+ P0.H = hi(PORTFIO);
+ P0.L = lo(PORTFIO);
+ R0 = W[P0](Z);
+ SSYNC;
+ R0 = R0 ^ R1;
+ W[P0] = R0.L;
+ SSYNC;
+ R1 = [SP++];
+ P0 = [SP++];
+ UNLINK;
+ RTS;
+ .size _led_toggle, .-_led_toggle
+
+/* Display the number using LEDs in binary format. */
+
+ENTRY(_led_disp_num)
+ LINK 12;
+ [--SP] = P0;
+ [--SP] = R1;
+ [--SP] = R2;
+ CALL _led_init;
+ R1 = 0x3f(X);
+ R0 = R0 & R1;
+ R2 = 6(X);
+ R0 <<= R2;
+ R1 <<= R2;
+ P0.H = hi(PORTFIO);
+ P0.L = lo(PORTFIO);
+ R2 = W[P0](Z);
+ SSYNC;
+ R1 = ~R1;
+ R2 = R2 & R1;
+ R2 = R2 | R0;
+ W[P0] = R2.L;
+ SSYNC;
+ R2 = [SP++];
+ R1 = [SP++];
+ P0 = [SP++];
+ UNLINK;
+ RTS;
+ .size _led_disp_num, .-_led_disp_num
+
+/* Toggle the number using LEDs in binary format. */
+
+ENTRY(_led_toggle_num)
+ LINK 12;
+ [--SP] = P0;
+ [--SP] = R1;
+ [--SP] = R2;
+ CALL _led_init;
+ R1 = 0x3f(X);
+ R0 = R0 & R1;
+ R1 = 6(X);
+ R0 <<= R1;
+ P0.H = hi(PORTFIO);
+ P0.L = lo(PORTFIO);
+ R1 = W[P0](Z);
+ SSYNC;
+ R1 = R1 ^ R0;
+ W[P0] = R1.L;
+ SSYNC;
+ R2 = [SP++];
+ R1 = [SP++];
+ P0 = [SP++];
+ UNLINK;
+ RTS;
+ .size _led_toggle_num, .-_led_toggle_num
+
diff --git a/arch/blackfin/mach-bf537/boards/pnav10.c b/arch/blackfin/mach-bf537/boards/pnav10.c
new file mode 100644
index 0000000..40d3a1b
--- /dev/null
+++ b/arch/blackfin/mach-bf537/boards/pnav10.c
@@ -0,0 +1,523 @@
+/*
+ * File: arch/blackfin/mach-bf537/boards/stamp.c
+ * Based on: arch/blackfin/mach-bf533/boards/ezkit.c
+ * Author: Aidan Williams <aidan@nicta.com.au>
+ *
+ * Created:
+ * Description:
+ *
+ * Modified:
+ * Copyright 2005 National ICT Australia (NICTA)
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#include <linux/usb_isp1362.h>
+#endif
+#include <asm/irq.h>
+#include <asm/bfin5xx_spi.h>
+#include <linux/usb_sl811.h>
+
+#include <linux/spi/ad7877.h>
+
+/*
+ * Name the Board for the /proc/cpuinfo
+ */
+char *bfin_board_name = "PNAV-1.0";
+
+/*
+ * Driver needs to know address, irq and flag pin.
+ */
+
+#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
+static struct resource bfin_pcmcia_cf_resources[] = {
+ {
+ .start = 0x20310000, /* IO PORT */
+ .end = 0x20312000,
+ .flags = IORESOURCE_MEM,
+ },{
+ .start = 0x20311000, /* Attribute Memeory */
+ .end = 0x20311FFF,
+ .flags = IORESOURCE_MEM,
+ },{
+ .start = IRQ_PF4,
+ .end = IRQ_PF4,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+ },{
+ .start = 6, /* Card Detect PF6 */
+ .end = 6,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device bfin_pcmcia_cf_device = {
+ .name = "bfin_cf_pcmcia",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(bfin_pcmcia_cf_resources),
+ .resource = bfin_pcmcia_cf_resources,
+};
+#endif
+
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+static struct platform_device rtc_device = {
+ .name = "rtc-bfin",
+ .id = -1,
+};
+#endif
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+static struct resource smc91x_resources[] = {
+ {
+ .name = "smc91x-regs",
+ .start = 0x20300300,
+ .end = 0x20300300 + 16,
+ .flags = IORESOURCE_MEM,
+ },{
+
+ .start = IRQ_PF7,
+ .end = IRQ_PF7,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+ },
+};
+static struct platform_device smc91x_device = {
+ .name = "smc91x",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(smc91x_resources),
+ .resource = smc91x_resources,
+};
+#endif
+
+#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
+static struct resource sl811_hcd_resources[] = {
+ {
+ .start = 0x20340000,
+ .end = 0x20340000,
+ .flags = IORESOURCE_MEM,
+ },{
+ .start = 0x20340004,
+ .end = 0x20340004,
+ .flags = IORESOURCE_MEM,
+ },{
+ .start = CONFIG_USB_SL811_BFIN_IRQ,
+ .end = CONFIG_USB_SL811_BFIN_IRQ,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+ },
+};
+
+#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
+void sl811_port_power(struct device *dev, int is_on)
+{
+ unsigned short mask = (1 << CONFIG_USB_SL811_BFIN_GPIO_VBUS);
+
+ bfin_write_PORT_FER(bfin_read_PORT_FER() & ~mask);
+ bfin_write_FIO_DIR(bfin_read_FIO_DIR() | mask);
+
+ if (is_on)
+ bfin_write_FIO_FLAG_S(mask);
+ else
+ bfin_write_FIO_FLAG_C(mask);
+}
+#endif
+
+static struct sl811_platform_data sl811_priv = {
+ .potpg = 10,
+ .power = 250, /* == 500mA */
+#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
+ .port_power = &sl811_port_power,
+#endif
+};
+
+static struct platform_device sl811_hcd_device = {
+ .name = "sl811-hcd",
+ .id = 0,
+ .dev = {
+ .platform_data = &sl811_priv,
+ },
+ .num_resources = ARRAY_SIZE(sl811_hcd_resources),
+ .resource = sl811_hcd_resources,
+};
+#endif
+
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+static struct resource isp1362_hcd_resources[] = {
+ {
+ .start = 0x20360000,
+ .end = 0x20360000,
+ .flags = IORESOURCE_MEM,
+ },{
+ .start = 0x20360004,
+ .end = 0x20360004,
+ .flags = IORESOURCE_MEM,
+ },{
+ .start = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ,
+ .end = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+ },
+};
+
+static struct isp1362_platform_data isp1362_priv = {
+ .sel15Kres = 1,
+ .clknotstop = 0,
+ .oc_enable = 0,
+ .int_act_high = 0,
+ .int_edge_triggered = 0,
+ .remote_wakeup_connected = 0,
+ .no_power_switching = 1,
+ .power_switching_mode = 0,
+};
+
+static struct platform_device isp1362_hcd_device = {
+ .name = "isp1362-hcd",
+ .id = 0,
+ .dev = {
+ .platform_data = &isp1362_priv,
+ },
+ .num_resources = ARRAY_SIZE(isp1362_hcd_resources),
+ .resource = isp1362_hcd_resources,
+};
+#endif
+
+#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+static struct platform_device bfin_mac_device = {
+ .name = "bfin_mac",
+};
+#endif
+
+#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+static struct resource net2272_bfin_resources[] = {
+ {
+ .start = 0x20300000,
+ .end = 0x20300000 + 0x100,
+ .flags = IORESOURCE_MEM,
+ },{
+ .start = IRQ_PF7,
+ .end = IRQ_PF7,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+ },
+};
+
+static struct platform_device net2272_bfin_device = {
+ .name = "net2272",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(net2272_bfin_resources),
+ .resource = net2272_bfin_resources,
+};
+#endif
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+/* all SPI peripherals info goes here */
+
+#if defined(CONFIG_MTD_M25P80) \
+ || defined(CONFIG_MTD_M25P80_MODULE)
+static struct mtd_partition bfin_spi_flash_partitions[] = {
+ {
+ .name = "bootloader",
+ .size = 0x00020000,
+ .offset = 0,
+ .mask_flags = MTD_CAP_ROM
+ },{
+ .name = "kernel",
+ .size = 0xe0000,
+ .offset = 0x20000
+ },{
+ .name = "file system",
+ .size = 0x700000,
+ .offset = 0x00100000,
+ }
+};
+
+static struct flash_platform_data bfin_spi_flash_data = {
+ .name = "m25p80",
+ .parts = bfin_spi_flash_partitions,
+ .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
+ .type = "m25p64",
+};
+
+/* SPI flash chip (m25p64) */
+static struct bfin5xx_spi_chip spi_flash_chip_info = {
+ .enable_dma = 0, /* use dma transfer with this chip*/
+ .bits_per_word = 8,
+};
+#endif
+
+#if defined(CONFIG_SPI_ADC_BF533) \
+ || defined(CONFIG_SPI_ADC_BF533_MODULE)
+/* SPI ADC chip */
+static struct bfin5xx_spi_chip spi_adc_chip_info = {
+ .enable_dma = 1, /* use dma transfer with this chip*/
+ .bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_SND_BLACKFIN_AD1836) \
+ || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
+ .enable_dma = 0,
+ .bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
+static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
+ .enable_dma = 0,
+ .bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+static struct bfin5xx_spi_chip spi_mmc_chip_info = {
+ .enable_dma = 1,
+ .bits_per_word = 8,
+};
+#endif
+
+#if defined(CONFIG_PBX)
+static struct bfin5xx_spi_chip spi_si3xxx_chip_info = {
+ .ctl_reg = 0x4, /* send zero */
+ .enable_dma = 0,
+ .bits_per_word = 8,
+ .cs_change_per_word = 1,
+};
+#endif
+
+
+#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
+static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
+ .cs_change_per_word = 1,
+ .enable_dma = 0,
+ .bits_per_word = 16,
+};
+
+static const struct ad7877_platform_data bfin_ad7877_ts_info = {
+ .model = 7877,
+ .vref_delay_usecs = 50, /* internal, no capacitor */
+ .x_plate_ohms = 419,
+ .y_plate_ohms = 486,
+ .pressure_max = 1000,
+ .pressure_min = 0,
+ .stopacq_polarity = 1,
+ .first_conversion_delay = 3,
+ .acquisition_time = 1,
+ .averaging = 1,
+ .pen_down_acc_interval = 1,
+};
+#endif
+
+static struct spi_board_info bfin_spi_board_info[] __initdata = {
+#if defined(CONFIG_MTD_M25P80) \
+ || defined(CONFIG_MTD_M25P80_MODULE)
+ {
+ /* the modalias must be the same as spi device driver name */
+ .modalias = "m25p80", /* Name of spi_driver for this device */
+ .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1, /* Framework bus number */
+ .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
+ .platform_data = &bfin_spi_flash_data,
+ .controller_data = &spi_flash_chip_info,
+ .mode = SPI_MODE_3,
+ },
+#endif
+
+#if defined(CONFIG_SPI_ADC_BF533) \
+ || defined(CONFIG_SPI_ADC_BF533_MODULE)
+ {
+ .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
+ .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1, /* Framework bus number */
+ .chip_select = 1, /* Framework chip select. */
+ .platform_data = NULL, /* No spi_driver specific config */
+ .controller_data = &spi_adc_chip_info,
+ },
+#endif
+
+#if defined(CONFIG_SND_BLACKFIN_AD1836) \
+ || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+ {
+ .modalias = "ad1836-spi",
+ .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1,
+ .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
+ .controller_data = &ad1836_spi_chip_info,
+ },
+#endif
+#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
+ {
+ .modalias = "ad9960-spi",
+ .max_speed_hz = 10000000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1,
+ .chip_select = 1,
+ .controller_data = &ad9960_spi_chip_info,
+ },
+#endif
+#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+ {
+ .modalias = "spi_mmc_dummy",
+ .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1,
+ .chip_select = 7,
+ .platform_data = NULL,
+ .controller_data = &spi_mmc_chip_info,
+ .mode = SPI_MODE_3,
+ },
+ {
+ .modalias = "spi_mmc",
+ .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1,
+ .chip_select = CONFIG_SPI_MMC_CS_CHAN,
+ .platform_data = NULL,
+ .controller_data = &spi_mmc_chip_info,
+ .mode = SPI_MODE_3,
+ },
+#endif
+#if defined(CONFIG_PBX)
+ {
+ .modalias = "fxs-spi",
+ .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1,
+ .chip_select = 3,
+ .controller_data= &spi_si3xxx_chip_info,
+ .mode = SPI_MODE_3,
+ },
+ {
+ .modalias = "fxo-spi",
+ .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1,
+ .chip_select = 2,
+ .controller_data= &spi_si3xxx_chip_info,
+ .mode = SPI_MODE_3,
+ },
+#endif
+#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
+{
+ .modalias = "ad7877",
+ .platform_data = &bfin_ad7877_ts_info,
+ .irq = IRQ_PF2,
+ .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1,
+ .chip_select = 5,
+ .controller_data = &spi_ad7877_chip_info,
+},
+#endif
+
+};
+
+/* SPI controller data */
+static struct bfin5xx_spi_master spi_bfin_master_info = {
+ .num_chipselect = 8,
+ .enable_dma = 1, /* master has the ability to do dma transfer */
+};
+
+static struct platform_device spi_bfin_master_device = {
+ .name = "bfin-spi-master",
+ .id = 1, /* Bus number */
+ .dev = {
+ .platform_data = &spi_bfin_master_info, /* Passed to driver */
+ },
+};
+#endif /* spi master and devices */
+
+#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
+static struct platform_device bfin_fb_device = {
+ .name = "bf537-fb",
+};
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+static struct resource bfin_uart_resources[] = {
+ {
+ .start = 0xFFC00400,
+ .end = 0xFFC004FF,
+ .flags = IORESOURCE_MEM,
+ },{
+ .start = 0xFFC02000,
+ .end = 0xFFC020FF,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device bfin_uart_device = {
+ .name = "bfin-uart",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(bfin_uart_resources),
+ .resource = bfin_uart_resources,
+};
+#endif
+
+
+static struct platform_device *stamp_devices[] __initdata = {
+#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
+ &bfin_pcmcia_cf_device,
+#endif
+
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+ &rtc_device,
+#endif
+
+#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
+ &sl811_hcd_device,
+#endif
+
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+ &isp1362_hcd_device,
+#endif
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+ &smc91x_device,
+#endif
+
+#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+ &bfin_mac_device,
+#endif
+
+#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+ &net2272_bfin_device,
+#endif
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+ &spi_bfin_master_device,
+#endif
+
+#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
+ &bfin_fb_device,
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+ &bfin_uart_device,
+#endif
+};
+
+static int __init stamp_init(void)
+{
+ printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__);
+ platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+ spi_register_board_info(bfin_spi_board_info,
+ ARRAY_SIZE(bfin_spi_board_info));
+#endif
+ return 0;
+}
+
+arch_initcall(stamp_init);
diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c
new file mode 100644
index 0000000..ba2f875
--- /dev/null
+++ b/arch/blackfin/mach-bf537/boards/stamp.c
@@ -0,0 +1,615 @@
+/*
+ * File: arch/blackfin/mach-bf537/boards/stamp.c
+ * Based on: arch/blackfin/mach-bf533/boards/ezkit.c
+ * Author: Aidan Williams <aidan@nicta.com.au>
+ *
+ * Created:
+ * Description:
+ *
+ * Modified:
+ * Copyright 2005 National ICT Australia (NICTA)
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#include <linux/usb_isp1362.h>
+#endif
+#include <asm/irq.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <asm/bfin5xx_spi.h>
+#include <linux/usb_sl811.h>
+
+#include <linux/spi/ad7877.h>
+
+/*
+ * Name the Board for the /proc/cpuinfo
+ */
+char *bfin_board_name = "ADDS-BF537-STAMP";
+
+/*
+ * Driver needs to know address, irq and flag pin.
+ */
+
+#define ISP1761_BASE 0x203C0000
+#define ISP1761_IRQ IRQ_PF7
+
+#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
+static struct resource bfin_isp1761_resources[] = {
+ [0] = {
+ .name = "isp1761-regs",
+ .start = ISP1761_BASE + 0x00000000,
+ .end = ISP1761_BASE + 0x000fffff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = ISP1761_IRQ,
+ .end = ISP1761_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device bfin_isp1761_device = {
+ .name = "isp1761",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(bfin_isp1761_resources),
+ .resource = bfin_isp1761_resources,
+};
+
+static struct platform_device *bfin_isp1761_devices[] = {
+ &bfin_isp1761_device,
+};
+
+int __init bfin_isp1761_init(void)
+{
+ unsigned int num_devices=ARRAY_SIZE(bfin_isp1761_devices);
+
+ printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__);
+ set_irq_type(ISP1761_IRQ, IRQF_TRIGGER_FALLING);
+
+ return platform_add_devices(bfin_isp1761_devices, num_devices);
+}
+
+void __exit bfin_isp1761_exit(void)
+{
+ platform_device_unregister(&bfin_isp1761_device);
+}
+
+arch_initcall(bfin_isp1761_init);
+#endif
+
+#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
+static struct resource bfin_pcmcia_cf_resources[] = {
+ {
+ .start = 0x20310000, /* IO PORT */
+ .end = 0x20312000,
+ .flags = IORESOURCE_MEM,
+ },{
+ .start = 0x20311000, /* Attribute Memeory */
+ .end = 0x20311FFF,
+ .flags = IORESOURCE_MEM,
+ },{
+ .start = IRQ_PF4,
+ .end = IRQ_PF4,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+ },{
+ .start = 6, /* Card Detect PF6 */
+ .end = 6,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device bfin_pcmcia_cf_device = {
+ .name = "bfin_cf_pcmcia",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(bfin_pcmcia_cf_resources),
+ .resource = bfin_pcmcia_cf_resources,
+};
+#endif
+
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+static struct platform_device rtc_device = {
+ .name = "rtc-bfin",
+ .id = -1,
+};
+#endif
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+static struct resource smc91x_resources[] = {
+ {
+ .name = "smc91x-regs",
+ .start = 0x20300300,
+ .end = 0x20300300 + 16,
+ .flags = IORESOURCE_MEM,
+ },{
+
+ .start = IRQ_PF7,
+ .end = IRQ_PF7,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+ },
+};
+static struct platform_device smc91x_device = {
+ .name = "smc91x",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(smc91x_resources),
+ .resource = smc91x_resources,
+};
+#endif
+
+#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
+static struct resource sl811_hcd_resources[] = {
+ {
+ .start = 0x20340000,
+ .end = 0x20340000,
+ .flags = IORESOURCE_MEM,
+ },{
+ .start = 0x20340004,
+ .end = 0x20340004,
+ .flags = IORESOURCE_MEM,
+ },{
+ .start = CONFIG_USB_SL811_BFIN_IRQ,
+ .end = CONFIG_USB_SL811_BFIN_IRQ,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+ },
+};
+
+#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
+void sl811_port_power(struct device *dev, int is_on)
+{
+ unsigned short mask = (1 << CONFIG_USB_SL811_BFIN_GPIO_VBUS);
+
+ bfin_write_PORT_FER(bfin_read_PORT_FER() & ~mask);
+ bfin_write_FIO_DIR(bfin_read_FIO_DIR() | mask);
+
+ if (is_on)
+ bfin_write_FIO_FLAG_S(mask);
+ else
+ bfin_write_FIO_FLAG_C(mask);
+}
+#endif
+
+static struct sl811_platform_data sl811_priv = {
+ .potpg = 10,
+ .power = 250, /* == 500mA */
+#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
+ .port_power = &sl811_port_power,
+#endif
+};
+
+static struct platform_device sl811_hcd_device = {
+ .name = "sl811-hcd",
+ .id = 0,
+ .dev = {
+ .platform_data = &sl811_priv,
+ },
+ .num_resources = ARRAY_SIZE(sl811_hcd_resources),
+ .resource = sl811_hcd_resources,
+};
+#endif
+
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+static struct resource isp1362_hcd_resources[] = {
+ {
+ .start = 0x20360000,
+ .end = 0x20360000,
+ .flags = IORESOURCE_MEM,
+ },{
+ .start = 0x20360004,
+ .end = 0x20360004,
+ .flags = IORESOURCE_MEM,
+ },{
+ .start = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ,
+ .end = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+ },
+};
+
+static struct isp1362_platform_data isp1362_priv = {
+ .sel15Kres = 1,
+ .clknotstop = 0,
+ .oc_enable = 0,
+ .int_act_high = 0,
+ .int_edge_triggered = 0,
+ .remote_wakeup_connected = 0,
+ .no_power_switching = 1,
+ .power_switching_mode = 0,
+};
+
+static struct platform_device isp1362_hcd_device = {
+ .name = "isp1362-hcd",
+ .id = 0,
+ .dev = {
+ .platform_data = &isp1362_priv,
+ },
+ .num_resources = ARRAY_SIZE(isp1362_hcd_resources),
+ .resource = isp1362_hcd_resources,
+};
+#endif
+
+#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+static struct platform_device bfin_mac_device = {
+ .name = "bfin_mac",
+};
+#endif
+
+#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+static struct resource net2272_bfin_resources[] = {
+ {
+ .start = 0x20300000,
+ .end = 0x20300000 + 0x100,
+ .flags = IORESOURCE_MEM,
+ },{
+ .start = IRQ_PF7,
+ .end = IRQ_PF7,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+ },
+};
+
+static struct platform_device net2272_bfin_device = {
+ .name = "net2272",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(net2272_bfin_resources),
+ .resource = net2272_bfin_resources,
+};
+#endif
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+/* all SPI peripherals info goes here */
+
+#if defined(CONFIG_MTD_M25P80) \
+ || defined(CONFIG_MTD_M25P80_MODULE)
+static struct mtd_partition bfin_spi_flash_partitions[] = {
+ {
+ .name = "bootloader",
+ .size = 0x00020000,
+ .offset = 0,
+ .mask_flags = MTD_CAP_ROM
+ },{
+ .name = "kernel",
+ .size = 0xe0000,
+ .offset = 0x20000
+ },{
+ .name = "file system",
+ .size = 0x700000,
+ .offset = 0x00100000,
+ }
+};
+
+static struct flash_platform_data bfin_spi_flash_data = {
+ .name = "m25p80",
+ .parts = bfin_spi_flash_partitions,
+ .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
+ .type = "m25p64",
+};
+
+/* SPI flash chip (m25p64) */
+static struct bfin5xx_spi_chip spi_flash_chip_info = {
+ .enable_dma = 0, /* use dma transfer with this chip*/
+ .bits_per_word = 8,
+};
+#endif
+
+#if defined(CONFIG_SPI_ADC_BF533) \
+ || defined(CONFIG_SPI_ADC_BF533_MODULE)
+/* SPI ADC chip */
+static struct bfin5xx_spi_chip spi_adc_chip_info = {
+ .enable_dma = 1, /* use dma transfer with this chip*/
+ .bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_SND_BLACKFIN_AD1836) \
+ || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
+ .enable_dma = 0,
+ .bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
+static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
+ .enable_dma = 0,
+ .bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+static struct bfin5xx_spi_chip spi_mmc_chip_info = {
+ .enable_dma = 1,
+ .bits_per_word = 8,
+};
+#endif
+
+#if defined(CONFIG_PBX)
+static struct bfin5xx_spi_chip spi_si3xxx_chip_info = {
+ .ctl_reg = 0x4, /* send zero */
+ .enable_dma = 0,
+ .bits_per_word = 8,
+ .cs_change_per_word = 1,
+};
+#endif
+
+#if defined(CONFIG_AD5304) || defined(CONFIG_AD5304_MODULE)
+static struct bfin5xx_spi_chip ad5304_chip_info = {
+ .enable_dma = 0,
+ .bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
+static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
+// .cs_change_per_word = 1,
+ .enable_dma = 0,
+ .bits_per_word = 16,
+};
+
+static const struct ad7877_platform_data bfin_ad7877_ts_info = {
+ .model = 7877,
+ .vref_delay_usecs = 50, /* internal, no capacitor */
+ .x_plate_ohms = 419,
+ .y_plate_ohms = 486,
+ .pressure_max = 1000,
+ .pressure_min = 0,
+ .stopacq_polarity = 1,
+ .first_conversion_delay = 3,
+ .acquisition_time = 1,
+ .averaging = 1,
+ .pen_down_acc_interval = 1,
+};
+#endif
+
+static struct spi_board_info bfin_spi_board_info[] __initdata = {
+#if defined(CONFIG_MTD_M25P80) \
+ || defined(CONFIG_MTD_M25P80_MODULE)
+ {
+ /* the modalias must be the same as spi device driver name */
+ .modalias = "m25p80", /* Name of spi_driver for this device */
+ .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1, /* Framework bus number */
+ .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
+ .platform_data = &bfin_spi_flash_data,
+ .controller_data = &spi_flash_chip_info,
+ .mode = SPI_MODE_3,
+ },
+#endif
+
+#if defined(CONFIG_SPI_ADC_BF533) \
+ || defined(CONFIG_SPI_ADC_BF533_MODULE)
+ {
+ .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
+ .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1, /* Framework bus number */
+ .chip_select = 1, /* Framework chip select. */
+ .platform_data = NULL, /* No spi_driver specific config */
+ .controller_data = &spi_adc_chip_info,
+ },
+#endif
+
+#if defined(CONFIG_SND_BLACKFIN_AD1836) \
+ || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+ {
+ .modalias = "ad1836-spi",
+ .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1,
+ .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
+ .controller_data = &ad1836_spi_chip_info,
+ },
+#endif
+#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
+ {
+ .modalias = "ad9960-spi",
+ .max_speed_hz = 10000000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1,
+ .chip_select = 1,
+ .controller_data = &ad9960_spi_chip_info,
+ },
+#endif
+#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+ {
+ .modalias = "spi_mmc_dummy",
+ .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1,
+ .chip_select = 0,
+ .platform_data = NULL,
+ .controller_data = &spi_mmc_chip_info,
+ .mode = SPI_MODE_3,
+ },
+ {
+ .modalias = "spi_mmc",
+ .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1,
+ .chip_select = CONFIG_SPI_MMC_CS_CHAN,
+ .platform_data = NULL,
+ .controller_data = &spi_mmc_chip_info,
+ .mode = SPI_MODE_3,
+ },
+#endif
+#if defined(CONFIG_PBX)
+ {
+ .modalias = "fxs-spi",
+ .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1,
+ .chip_select = 3,
+ .controller_data= &spi_si3xxx_chip_info,
+ .mode = SPI_MODE_3,
+ },
+ {
+ .modalias = "fxo-spi",
+ .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1,
+ .chip_select = 2,
+ .controller_data= &spi_si3xxx_chip_info,
+ .mode = SPI_MODE_3,
+ },
+#endif
+#if defined(CONFIG_AD5304) || defined(CONFIG_AD5304_MODULE)
+ {
+ .modalias = "ad5304_spi",
+ .max_speed_hz = 1250000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1,
+ .chip_select = 2,
+ .platform_data = NULL,
+ .controller_data = &ad5304_chip_info,
+ .mode = SPI_MODE_2,
+ },
+#endif
+#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
+ {
+ .modalias = "ad7877",
+ .platform_data = &bfin_ad7877_ts_info,
+ .irq = IRQ_PF6,
+ .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1,
+ .chip_select = 1,
+ .controller_data = &spi_ad7877_chip_info,
+ },
+#endif
+};
+
+/* SPI controller data */
+static struct bfin5xx_spi_master spi_bfin_master_info = {
+ .num_chipselect = 8,
+ .enable_dma = 1, /* master has the ability to do dma transfer */
+};
+
+static struct platform_device spi_bfin_master_device = {
+ .name = "bfin-spi-master",
+ .id = 1, /* Bus number */
+ .dev = {
+ .platform_data = &spi_bfin_master_info, /* Passed to driver */
+ },
+};
+#endif /* spi master and devices */
+
+#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
+static struct platform_device bfin_fb_device = {
+ .name = "bf537-fb",
+};
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+static struct resource bfin_uart_resources[] = {
+ {
+ .start = 0xFFC00400,
+ .end = 0xFFC004FF,
+ .flags = IORESOURCE_MEM,
+ },{
+ .start = 0xFFC02000,
+ .end = 0xFFC020FF,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device bfin_uart_device = {
+ .name = "bfin-uart",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(bfin_uart_resources),
+ .resource = bfin_uart_resources,
+};
+#endif
+
+#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+static struct platform_device i2c_bfin_twi_device = {
+ .name = "i2c-bfin-twi",
+ .id = 0,
+};
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+static struct platform_device bfin_sport0_uart_device = {
+ .name = "bfin-sport-uart",
+ .id = 0,
+};
+
+static struct platform_device bfin_sport1_uart_device = {
+ .name = "bfin-sport-uart",
+ .id = 1,
+};
+#endif
+
+static struct platform_device *stamp_devices[] __initdata = {
+#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
+ &bfin_pcmcia_cf_device,
+#endif
+
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+ &rtc_device,
+#endif
+
+#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
+ &sl811_hcd_device,
+#endif
+
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+ &isp1362_hcd_device,
+#endif
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+ &smc91x_device,
+#endif
+
+#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+ &bfin_mac_device,
+#endif
+
+#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+ &net2272_bfin_device,
+#endif
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+ &spi_bfin_master_device,
+#endif
+
+#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
+ &bfin_fb_device,
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+ &bfin_uart_device,
+#endif
+
+#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+ &i2c_bfin_twi_device,
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+ &bfin_sport0_uart_device,
+ &bfin_sport1_uart_device,
+#endif
+};
+
+static int __init stamp_init(void)
+{
+ printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__);
+ platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+ spi_register_board_info(bfin_spi_board_info,
+ ARRAY_SIZE(bfin_spi_board_info));
+#endif
+ return 0;
+}
+
+arch_initcall(stamp_init);
diff --git a/arch/blackfin/mach-bf537/cpu.c b/arch/blackfin/mach-bf537/cpu.c
new file mode 100644
index 0000000..2d83b7e
--- /dev/null
+++ b/arch/blackfin/mach-bf537/cpu.c
@@ -0,0 +1,161 @@
+/*
+ * File: arch/blackfin/mach-bf537/cpu.c
+ * Based on:
+ * Author: michael.kang@analog.com
+ *
+ * Created:
+ * Description: clock scaling for the bf537
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/cpufreq.h>
+#include <asm/dpmc.h>
+#include <linux/fs.h>
+#include <asm/bfin-global.h>
+
+/* CONFIG_CLKIN_HZ=11059200 */
+#define VCO5 (CONFIG_CLKIN_HZ*45) /*497664000 */
+#define VCO4 (CONFIG_CLKIN_HZ*36) /*398131200 */
+#define VCO3 (CONFIG_CLKIN_HZ*27) /*298598400 */
+#define VCO2 (CONFIG_CLKIN_HZ*18) /*199065600 */
+#define VCO1 (CONFIG_CLKIN_HZ*9) /*99532800 */
+#define VCO(x) VCO##x
+
+#define FREQ(x) {VCO(x),VCO(x)/4},{VCO(x),VCO(x)/2},{VCO(x),VCO(x)}
+/* frequency */
+static struct cpufreq_frequency_table bf537_freq_table[] = {
+ FREQ(1),
+ FREQ(3),
+ {VCO4, VCO4 / 2}, {VCO4, VCO4},
+ FREQ(5),
+ {0, CPUFREQ_TABLE_END},
+};
+
+/*
+ * dpmc_fops->ioctl()
+ * static int dpmc_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
+ */
+static int bf537_getfreq(unsigned int cpu)
+{
+ unsigned long cclk_mhz, vco_mhz;
+
+ /* The driver only support single cpu */
+ if (cpu == 0)
+ dpmc_fops.ioctl(NULL, NULL, IOCTL_GET_CORECLOCK, &cclk_mhz);
+ else
+ cclk_mhz = -1;
+ return cclk_mhz;
+}
+
+static int bf537_target(struct cpufreq_policy *policy,
+ unsigned int target_freq, unsigned int relation)
+{
+ unsigned long cclk_mhz;
+ unsigned long vco_mhz;
+ unsigned long flags;
+ unsigned int index, vco_index;
+ int i;
+
+ struct cpufreq_freqs freqs;
+ if (cpufreq_frequency_table_target
+ (policy, bf537_freq_table, target_freq, relation, &index))
+ return -EINVAL;
+ cclk_mhz = bf537_freq_table[index].frequency;
+ vco_mhz = bf537_freq_table[index].index;
+
+ dpmc_fops.ioctl(NULL, NULL, IOCTL_CHANGE_FREQUENCY, &vco_mhz);
+ freqs.old = bf537_getfreq(0);
+ freqs.new = cclk_mhz;
+ freqs.cpu = 0;
+
+ pr_debug("cclk begin change to cclk %d,vco=%d,index=%d,target=%d,oldfreq=%d\n",
+ cclk_mhz, vco_mhz, index, target_freq, freqs.old);
+
+ cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+ local_irq_save(flags);
+ dpmc_fops.ioctl(NULL, NULL, IOCTL_SET_CCLK, &cclk_mhz);
+ local_irq_restore(flags);
+ cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+
+ vco_mhz = get_vco();
+ cclk_mhz = get_cclk();
+ return 0;
+}
+
+/* make sure that only the "userspace" governor is run -- anything else wouldn't make sense on
+ * this platform, anyway.
+ */
+static int bf537_verify_speed(struct cpufreq_policy *policy)
+{
+ return cpufreq_frequency_table_verify(policy, &bf537_freq_table);
+}
+
+static int __init __bf537_cpu_init(struct cpufreq_policy *policy)
+{
+ int result;
+
+ if (policy->cpu != 0)
+ return -EINVAL;
+
+ policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
+
+ policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
+ /*Now ,only support one cpu */
+ policy->cur = bf537_getfreq(0);
+ cpufreq_frequency_table_get_attr(bf537_freq_table, policy->cpu);
+ return cpufreq_frequency_table_cpuinfo(policy, bf537_freq_table);
+}
+
+static struct freq_attr *bf537_freq_attr[] = {
+ &cpufreq_freq_attr_scaling_available_freqs,
+ NULL,
+};
+
+static struct cpufreq_driver bf537_driver = {
+ .verify = bf537_verify_speed,
+ .target = bf537_target,
+ .get = bf537_getfreq,
+ .init = __bf537_cpu_init,
+ .name = "bf537",
+ .owner = THIS_MODULE,
+ .attr = bf537_freq_attr,
+};
+
+static int __init bf537_cpu_init(void)
+{
+ return cpufreq_register_driver(&bf537_driver);
+}
+
+static void __exit bf537_cpu_exit(void)
+{
+ cpufreq_unregister_driver(&bf537_driver);
+}
+
+MODULE_AUTHOR("Mickael Kang");
+MODULE_DESCRIPTION("cpufreq driver for BF537 CPU");
+MODULE_LICENSE("GPL");
+
+module_init(bf537_cpu_init);
+module_exit(bf537_cpu_exit);
diff --git a/arch/blackfin/mach-bf537/head.S b/arch/blackfin/mach-bf537/head.S
new file mode 100644
index 0000000..d104e1d8
--- /dev/null
+++ b/arch/blackfin/mach-bf537/head.S
@@ -0,0 +1,602 @@
+/*
+ * File: arch/blackfin/mach-bf537/head.S
+ * Based on: arch/blackfin/mach-bf533/head.S
+ * Author: Jeff Dionne <jeff@uclinux.org> COPYRIGHT 1998 D. Jeff Dionne
+ *
+ * Created: 1998
+ * Description: Startup code for Blackfin BF537
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/linkage.h>
+#include <asm/blackfin.h>
+#if CONFIG_BFIN_KERNEL_CLOCK
+#include <asm/mach/mem_init.h>
+#endif
+
+.global __rambase
+.global __ramstart
+.global __ramend
+.extern ___bss_stop
+.extern ___bss_start
+.extern _bf53x_relocate_l1_mem
+
+#define INITIAL_STACK 0xFFB01000
+
+.text
+
+ENTRY(__start)
+ENTRY(__stext)
+ /* R0: argument of command line string, passed from uboot, save it */
+ R7 = R0;
+ /* Set the SYSCFG register */
+ R0 = 0x36;
+ SYSCFG = R0; /*Enable Cycle Counter and Nesting Of Interrupts(3rd Bit)*/
+ R0 = 0;
+
+ /* Clear Out All the data and pointer Registers*/
+ R1 = R0;
+ R2 = R0;
+ R3 = R0;
+ R4 = R0;
+ R5 = R0;
+ R6 = R0;
+
+ P0 = R0;
+ P1 = R0;
+ P2 = R0;
+ P3 = R0;
+ P4 = R0;
+ P5 = R0;
+
+ LC0 = r0;
+ LC1 = r0;
+ L0 = r0;
+ L1 = r0;
+ L2 = r0;
+ L3 = r0;
+
+ /* Clear Out All the DAG Registers*/
+ B0 = r0;
+ B1 = r0;
+ B2 = r0;
+ B3 = r0;
+
+ I0 = r0;
+ I1 = r0;
+ I2 = r0;
+ I3 = r0;
+
+ M0 = r0;
+ M1 = r0;
+ M2 = r0;
+ M3 = r0;
+
+ /* Turn off the icache */
+ p0.l = (IMEM_CONTROL & 0xFFFF);
+ p0.h = (IMEM_CONTROL >> 16);
+ R1 = [p0];
+ R0 = ~ENICPLB;
+ R0 = R0 & R1;
+
+ /* Anomaly 05000125 */
+#ifdef ANOMALY_05000125
+ CLI R2;
+ SSYNC;
+#endif
+ [p0] = R0;
+ SSYNC;
+#ifdef ANOMALY_05000125
+ STI R2;
+#endif
+
+ /* Turn off the dcache */
+ p0.l = (DMEM_CONTROL & 0xFFFF);
+ p0.h = (DMEM_CONTROL >> 16);
+ R1 = [p0];
+ R0 = ~ENDCPLB;
+ R0 = R0 & R1;
+
+ /* Anomaly 05000125 */
+#ifdef ANOMALY_05000125
+ CLI R2;
+ SSYNC;
+#endif
+ [p0] = R0;
+ SSYNC;
+#ifdef ANOMALY_05000125
+ STI R2;
+#endif
+
+ /* Initialise General-Purpose I/O Modules on BF537 */
+ /* Rev 0.0 Anomaly 05000212 - PORTx_FER,
+ * PORT_MUX Registers Do Not accept "writes" correctly:
+ */
+ p0.h = hi(BFIN_PORT_MUX);
+ p0.l = lo(BFIN_PORT_MUX);
+#ifdef ANOMALY_05000212
+ R0.L = W[P0]; /* Read */
+ SSYNC;
+#endif
+ R0 = (PGDE_UART | PFTE_UART)(Z);
+#ifdef ANOMALY_05000212
+ W[P0] = R0.L; /* Write */
+ SSYNC;
+#endif
+ W[P0] = R0.L; /* Enable both UARTS */
+ SSYNC;
+
+ p0.h = hi(PORTF_FER);
+ p0.l = lo(PORTF_FER);
+#ifdef ANOMALY_05000212
+ R0.L = W[P0]; /* Read */
+ SSYNC;
+#endif
+ R0 = 0x000F(Z);
+#ifdef ANOMALY_05000212
+ W[P0] = R0.L; /* Write */
+ SSYNC;
+#endif
+ /* Enable peripheral function of PORTF for UART0 and UART1 */
+ W[P0] = R0.L;
+ SSYNC;
+
+#if !defined(CONFIG_BF534)
+ p0.h = hi(EMAC_SYSTAT);
+ p0.l = lo(EMAC_SYSTAT);
+ R0.h = 0xFFFF; /* Clear EMAC Interrupt Status bits */
+ R0.l = 0xFFFF;
+ [P0] = R0;
+ SSYNC;
+#endif
+
+#ifdef CONFIG_BF537_PORT_H
+ p0.h = hi(PORTH_FER);
+ p0.l = lo(PORTH_FER);
+ R0.L = W[P0]; /* Read */
+ SSYNC;
+ R0 = 0x0000;
+ W[P0] = R0.L; /* Write */
+ SSYNC;
+ W[P0] = R0.L; /* Disable peripheral function of PORTH */
+ SSYNC;
+#endif
+
+ /*Initialise UART*/
+ p0.h = hi(UART_LCR);
+ p0.l = lo(UART_LCR);
+ r0 = 0x0(Z);
+ w[p0] = r0.L; /* To enable DLL writes */
+ ssync;
+
+ p0.h = hi(UART_DLL);
+ p0.l = lo(UART_DLL);
+ r0 = 0x00(Z);
+ w[p0] = r0.L;
+ ssync;
+
+ p0.h = hi(UART_DLH);
+ p0.l = lo(UART_DLH);
+ r0 = 0x00(Z);
+ w[p0] = r0.L;
+ ssync;
+
+ p0.h = hi(UART_GCTL);
+ p0.l = lo(UART_GCTL);
+ r0 = 0x0(Z);
+ w[p0] = r0.L; /* To enable UART clock */
+ ssync;
+
+ /* Initialize stack pointer */
+ sp.l = lo(INITIAL_STACK);
+ sp.h = hi(INITIAL_STACK);
+ fp = sp;
+ usp = sp;
+
+ /* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */
+ call _bf53x_relocate_l1_mem;
+#if CONFIG_BFIN_KERNEL_CLOCK
+ call _start_dma_code;
+#endif
+ /* Code for initializing Async memory banks */
+
+ p2.h = hi(EBIU_AMBCTL1);
+ p2.l = lo(EBIU_AMBCTL1);
+ r0.h = hi(AMBCTL1VAL);
+ r0.l = lo(AMBCTL1VAL);
+ [p2] = r0;
+ ssync;
+
+ p2.h = hi(EBIU_AMBCTL0);
+ p2.l = lo(EBIU_AMBCTL0);
+ r0.h = hi(AMBCTL0VAL);
+ r0.l = lo(AMBCTL0VAL);
+ [p2] = r0;
+ ssync;
+
+ p2.h = hi(EBIU_AMGCTL);
+ p2.l = lo(EBIU_AMGCTL);
+ r0 = AMGCTLVAL;
+ w[p2] = r0;
+ ssync;
+
+ /* This section keeps the processor in supervisor mode
+ * during kernel boot. Switches to user mode at end of boot.
+ * See page 3-9 of Hardware Reference manual for documentation.
+ */
+
+ /* EVT15 = _real_start */
+
+ p0.l = lo(EVT15);
+ p0.h = hi(EVT15);
+ p1.l = _real_start;
+ p1.h = _real_start;
+ [p0] = p1;
+ csync;
+
+ p0.l = lo(IMASK);
+ p0.h = hi(IMASK);
+ p1.l = IMASK_IVG15;
+ p1.h = 0x0;
+ [p0] = p1;
+ csync;
+
+ raise 15;
+ p0.l = .LWAIT_HERE;
+ p0.h = .LWAIT_HERE;
+ reti = p0;
+#if defined(ANOMALY_05000281)
+ nop; nop; nop;
+#endif
+ rti;
+
+.LWAIT_HERE:
+ jump .LWAIT_HERE;
+
+ENTRY(_real_start)
+ [ -- sp ] = reti;
+ p0.l = lo(WDOG_CTL);
+ p0.h = hi(WDOG_CTL);
+ r0 = 0xAD6(z);
+ w[p0] = r0; /* watchdog off for now */
+ ssync;
+
+ /* Code update for BSS size == 0
+ * Zero out the bss region.
+ */
+
+ p1.l = ___bss_start;
+ p1.h = ___bss_start;
+ p2.l = ___bss_stop;
+ p2.h = ___bss_stop;
+ r0 = 0;
+ p2 -= p1;
+ lsetup (.L_clear_bss, .L_clear_bss ) lc0 = p2;
+.L_clear_bss:
+ B[p1++] = r0;
+
+ /* In case there is a NULL pointer reference
+ * Zero out region before stext
+ */
+
+ p1.l = 0x0;
+ p1.h = 0x0;
+ r0.l = __stext;
+ r0.h = __stext;
+ r0 = r0 >> 1;
+ p2 = r0;
+ r0 = 0;
+ lsetup (.L_clear_zero, .L_clear_zero ) lc0 = p2;
+.L_clear_zero:
+ W[p1++] = r0;
+
+ /* pass the uboot arguments to the global value command line */
+ R0 = R7;
+ call _cmdline_init;
+
+ p1.l = __rambase;
+ p1.h = __rambase;
+ r0.l = __sdata;
+ r0.h = __sdata;
+ [p1] = r0;
+
+ p1.l = __ramstart;
+ p1.h = __ramstart;
+ p3.l = ___bss_stop;
+ p3.h = ___bss_stop;
+
+ r1 = p3;
+ [p1] = r1;
+
+
+ /*
+ * load the current thread pointer and stack
+ */
+ r1.l = _init_thread_union;
+ r1.h = _init_thread_union;
+
+ r2.l = 0x2000;
+ r2.h = 0x0000;
+ r1 = r1 + r2;
+ sp = r1;
+ usp = sp;
+ fp = sp;
+ call _start_kernel;
+.L_exit:
+ jump.s .L_exit;
+
+.section .l1.text
+#if CONFIG_BFIN_KERNEL_CLOCK
+ENTRY(_start_dma_code)
+
+ /* Enable PHY CLK buffer output */
+ p0.h = hi(VR_CTL);
+ p0.l = lo(VR_CTL);
+ r0.l = w[p0];
+ bitset(r0, 14);
+ w[p0] = r0.l;
+ ssync;
+
+ p0.h = hi(SIC_IWR);
+ p0.l = lo(SIC_IWR);
+ r0.l = 0x1;
+ r0.h = 0x0;
+ [p0] = r0;
+ SSYNC;
+
+ /*
+ * Set PLL_CTL
+ * - [14:09] = MSEL[5:0] : CLKIN / VCO multiplication factors
+ * - [8] = BYPASS : BYPASS the PLL, run CLKIN into CCLK/SCLK
+ * - [7] = output delay (add 200ps of delay to mem signals)
+ * - [6] = input delay (add 200ps of input delay to mem signals)
+ * - [5] = PDWN : 1=All Clocks off
+ * - [3] = STOPCK : 1=Core Clock off
+ * - [1] = PLL_OFF : 1=Disable Power to PLL
+ * - [0] = DF : 1=Pass CLKIN/2 to PLL / 0=Pass CLKIN to PLL
+ * all other bits set to zero
+ */
+
+ p0.h = hi(PLL_LOCKCNT);
+ p0.l = lo(PLL_LOCKCNT);
+ r0 = 0x300(Z);
+ w[p0] = r0.l;
+ ssync;
+
+ P2.H = hi(EBIU_SDGCTL);
+ P2.L = lo(EBIU_SDGCTL);
+ R0 = [P2];
+ BITSET (R0, 24);
+ [P2] = R0;
+ SSYNC;
+
+ r0 = CONFIG_VCO_MULT & 63; /* Load the VCO multiplier */
+ r0 = r0 << 9; /* Shift it over, */
+ r1 = CLKIN_HALF; /* Do we need to divide CLKIN by 2?*/
+ r0 = r1 | r0;
+ r1 = PLL_BYPASS; /* Bypass the PLL? */
+ r1 = r1 << 8; /* Shift it over */
+ r0 = r1 | r0; /* add them all together */
+
+ p0.h = hi(PLL_CTL);
+ p0.l = lo(PLL_CTL); /* Load the address */
+ cli r2; /* Disable interrupts */
+ ssync;
+ w[p0] = r0.l; /* Set the value */
+ idle; /* Wait for the PLL to stablize */
+ sti r2; /* Enable interrupts */
+
+.Lcheck_again:
+ p0.h = hi(PLL_STAT);
+ p0.l = lo(PLL_STAT);
+ R0 = W[P0](Z);
+ CC = BITTST(R0,5);
+ if ! CC jump .Lcheck_again;
+
+ /* Configure SCLK & CCLK Dividers */
+ r0 = (CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV);
+ p0.h = hi(PLL_DIV);
+ p0.l = lo(PLL_DIV);
+ w[p0] = r0.l;
+ ssync;
+
+ p0.l = lo(EBIU_SDRRC);
+ p0.h = hi(EBIU_SDRRC);
+ r0 = mem_SDRRC;
+ w[p0] = r0.l;
+ ssync;
+
+ p0.l = (EBIU_SDBCTL & 0xFFFF);
+ p0.h = (EBIU_SDBCTL >> 16); /* SDRAM Memory Bank Control Register */
+ r0 = mem_SDBCTL;
+ w[p0] = r0.l;
+ ssync;
+
+ P2.H = hi(EBIU_SDGCTL);
+ P2.L = lo(EBIU_SDGCTL);
+ R0 = [P2];
+ BITCLR (R0, 24);
+ p0.h = hi(EBIU_SDSTAT);
+ p0.l = lo(EBIU_SDSTAT);
+ r2.l = w[p0];
+ cc = bittst(r2,3);
+ if !cc jump .Lskip;
+ NOP;
+ BITSET (R0, 23);
+.Lskip:
+ [P2] = R0;
+ SSYNC;
+
+ R0.L = lo(mem_SDGCTL);
+ R0.H = hi(mem_SDGCTL);
+ R1 = [p2];
+ R1 = R1 | R0;
+ [P2] = R1;
+ SSYNC;
+
+ p0.h = hi(SIC_IWR);
+ p0.l = lo(SIC_IWR);
+ r0.l = lo(IWR_ENABLE_ALL);
+ r0.h = hi(IWR_ENABLE_ALL);
+ [p0] = r0;
+ SSYNC;
+
+ RTS;
+#endif /* CONFIG_BFIN_KERNEL_CLOCK */
+
+ENTRY(_bfin_reset)
+ /* No more interrupts to be handled*/
+ CLI R6;
+ SSYNC;
+
+#if defined(CONFIG_MTD_M25P80)
+/*
+ * The following code fix the SPI flash reboot issue,
+ * /CS signal of the chip which is using PF10 return to GPIO mode
+ */
+ p0.h = hi(PORTF_FER);
+ p0.l = lo(PORTF_FER);
+ r0.l = 0x0000;
+ w[p0] = r0.l;
+ SSYNC;
+
+/* /CS return to high */
+ p0.h = hi(PORTFIO);
+ p0.l = lo(PORTFIO);
+ r0.l = 0xFFFF;
+ w[p0] = r0.l;
+ SSYNC;
+
+/* Delay some time, This is necessary */
+ r1.h = 0;
+ r1.l = 0x400;
+ p1 = r1;
+ lsetup (_delay_lab1,_delay_lab1_end ) lc1 = p1;
+_delay_lab1:
+ r0.h = 0;
+ r0.l = 0x8000;
+ p0 = r0;
+ lsetup (_delay_lab0,_delay_lab0_end ) lc0 = p0;
+_delay_lab0:
+ nop;
+_delay_lab0_end:
+ nop;
+_delay_lab1_end:
+ nop;
+#endif
+
+ /* Clear the bits 13-15 in SWRST if they werent cleared */
+ p0.h = hi(SWRST);
+ p0.l = lo(SWRST);
+ csync;
+ r0.l = w[p0];
+
+ /* Clear the IMASK register */
+ p0.h = hi(IMASK);
+ p0.l = lo(IMASK);
+ r0 = 0x0;
+ [p0] = r0;
+
+ /* Clear the ILAT register */
+ p0.h = hi(ILAT);
+ p0.l = lo(ILAT);
+ r0 = [p0];
+ [p0] = r0;
+ SSYNC;
+
+ /* Disable the WDOG TIMER */
+ p0.h = hi(WDOG_CTL);
+ p0.l = lo(WDOG_CTL);
+ r0.l = 0xAD6;
+ w[p0] = r0.l;
+ SSYNC;
+
+ /* Clear the sticky bit incase it is already set */
+ p0.h = hi(WDOG_CTL);
+ p0.l = lo(WDOG_CTL);
+ r0.l = 0x8AD6;
+ w[p0] = r0.l;
+ SSYNC;
+
+ /* Program the count value */
+ R0.l = 0x100;
+ R0.h = 0x0;
+ P0.h = hi(WDOG_CNT);
+ P0.l = lo(WDOG_CNT);
+ [P0] = R0;
+ SSYNC;
+
+ /* Program WDOG_STAT if necessary */
+ P0.h = hi(WDOG_CTL);
+ P0.l = lo(WDOG_CTL);
+ R0 = W[P0](Z);
+ CC = BITTST(R0,1);
+ if !CC JUMP .LWRITESTAT;
+ CC = BITTST(R0,2);
+ if !CC JUMP .LWRITESTAT;
+ JUMP .LSKIP_WRITE;
+
+.LWRITESTAT:
+ /* When watch dog timer is enabled,
+ * a write to STAT will load the contents of CNT to STAT
+ */
+ R0 = 0x0000(z);
+ P0.h = hi(WDOG_STAT);
+ P0.l = lo(WDOG_STAT)
+ [P0] = R0;
+ SSYNC;
+
+.LSKIP_WRITE:
+ /* Enable the reset event */
+ P0.h = hi(WDOG_CTL);
+ P0.l = lo(WDOG_CTL);
+ R0 = W[P0](Z);
+ BITCLR(R0,1);
+ BITCLR(R0,2);
+ W[P0] = R0.L;
+ SSYNC;
+ NOP;
+
+ /* Enable the wdog counter */
+ R0 = W[P0](Z);
+ BITCLR(R0,4);
+ W[P0] = R0.L;
+ SSYNC;
+
+ IDLE;
+
+ RTS;
+
+.data
+
+/*
+ * Set up the usable of RAM stuff. Size of RAM is determined then
+ * an initial stack set up at the end.
+ */
+
+.align 4
+__rambase:
+.long 0
+__ramstart:
+.long 0
+__ramend:
+.long 0
diff --git a/arch/blackfin/mach-bf537/ints-priority.c b/arch/blackfin/mach-bf537/ints-priority.c
new file mode 100644
index 0000000..fd6308e
--- /dev/null
+++ b/arch/blackfin/mach-bf537/ints-priority.c
@@ -0,0 +1,74 @@
+/*
+ * File: arch/blackfin/mach-bf537/ints-priority.c
+ * Based on: arch/blackfin/mach-bf533/ints-priority.c
+ * Author: Michael Hennerich
+ *
+ * Created:
+ * Description: Set up the interupt priorities
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/module.h>
+#include <asm/blackfin.h>
+#include <asm/irq.h>
+
+void program_IAR(void)
+{
+ /* Program the IAR0 Register with the configured priority */
+ bfin_write_SIC_IAR0(((CONFIG_IRQ_PLL_WAKEUP - 7) << IRQ_PLL_WAKEUP_POS) |
+ ((CONFIG_IRQ_DMA_ERROR - 7) << IRQ_DMA_ERROR_POS) |
+ ((CONFIG_IRQ_ERROR - 7) << IRQ_ERROR_POS) |
+ ((CONFIG_IRQ_RTC - 7) << IRQ_RTC_POS) |
+ ((CONFIG_IRQ_PPI - 7) << IRQ_PPI_POS) |
+ ((CONFIG_IRQ_SPORT0_RX - 7) << IRQ_SPORT0_RX_POS) |
+ ((CONFIG_IRQ_SPORT0_TX - 7) << IRQ_SPORT0_TX_POS) |
+ ((CONFIG_IRQ_SPORT1_RX - 7) << IRQ_SPORT1_RX_POS));
+
+ bfin_write_SIC_IAR1(((CONFIG_IRQ_SPORT1_TX - 7) << IRQ_SPORT1_TX_POS) |
+ ((CONFIG_IRQ_TWI - 7) << IRQ_TWI_POS) |
+ ((CONFIG_IRQ_SPI - 7) << IRQ_SPI_POS) |
+ ((CONFIG_IRQ_UART0_RX - 7) << IRQ_UART0_RX_POS) |
+ ((CONFIG_IRQ_UART0_TX - 7) << IRQ_UART0_TX_POS) |
+ ((CONFIG_IRQ_UART1_RX - 7) << IRQ_UART1_RX_POS) |
+ ((CONFIG_IRQ_UART1_TX - 7) << IRQ_UART1_TX_POS) |
+ ((CONFIG_IRQ_CAN_RX - 7) << IRQ_CAN_RX_POS));
+
+ bfin_write_SIC_IAR2(((CONFIG_IRQ_CAN_TX - 7) << IRQ_CAN_TX_POS) |
+ ((CONFIG_IRQ_MAC_RX - 7) << IRQ_MAC_RX_POS) |
+ ((CONFIG_IRQ_MAC_TX - 7) << IRQ_MAC_TX_POS) |
+ ((CONFIG_IRQ_TMR0 - 7) << IRQ_TMR0_POS) |
+ ((CONFIG_IRQ_TMR1 - 7) << IRQ_TMR1_POS) |
+ ((CONFIG_IRQ_TMR2 - 7) << IRQ_TMR2_POS) |
+ ((CONFIG_IRQ_TMR3 - 7) << IRQ_TMR3_POS) |
+ ((CONFIG_IRQ_TMR4 - 7) << IRQ_TMR4_POS));
+
+ bfin_write_SIC_IAR3(((CONFIG_IRQ_TMR5 - 7) << IRQ_TMR5_POS) |
+ ((CONFIG_IRQ_TMR6 - 7) << IRQ_TMR6_POS) |
+ ((CONFIG_IRQ_TMR7 - 7) << IRQ_TMR7_POS) |
+ ((CONFIG_IRQ_PROG_INTA - 7) << IRQ_PROG_INTA_POS) |
+ ((CONFIG_IRQ_PORTG_INTB - 7) << IRQ_PORTG_INTB_POS) |
+ ((CONFIG_IRQ_MEM_DMA0 - 7) << IRQ_MEM_DMA0_POS) |
+ ((CONFIG_IRQ_MEM_DMA1 - 7) << IRQ_MEM_DMA1_POS) |
+ ((CONFIG_IRQ_WATCH - 7) << IRQ_WATCH_POS));
+
+ SSYNC();
+}
diff --git a/arch/blackfin/mach-bf561/Kconfig b/arch/blackfin/mach-bf561/Kconfig
new file mode 100644
index 0000000..0a17c4c
--- /dev/null
+++ b/arch/blackfin/mach-bf561/Kconfig
@@ -0,0 +1,222 @@
+if BF561
+
+menu "BF561 Specific Configuration"
+
+comment "Core B Support"
+
+menu "Core B Support"
+
+config BF561_COREB
+ bool "Enable Core B support"
+ default y
+
+config BF561_COREB_RESET
+ bool "Enable Core B reset support"
+ default n
+ help
+ This requires code in the application that is loaded
+ into Core B. In order to reset, the application needs
+ to install an interrupt handler for Supplemental
+ Interrupt 0, that sets RETI to 0xff600000 and writes
+ bit 11 of SICB_SYSCR when bit 5 of SICA_SYSCR is 0.
+ This causes Core B to stall when Supplemental Interrupt
+ 0 is set, and will reset PC to 0xff600000 when
+ COREB_SRAM_INIT is cleared.
+
+endmenu
+
+comment "Interrupt Priority Assignment"
+
+menu "Priority"
+
+config IRQ_PLL_WAKEUP
+ int "PLL Wakeup Interrupt"
+ default 7
+config IRQ_DMA1_ERROR
+ int "DMA1 Error (generic)"
+ default 7
+config IRQ_DMA2_ERROR
+ int "DMA2 Error (generic)"
+ default 7
+config IRQ_IMDMA_ERROR
+ int "IMDMA Error (generic)"
+ default 7
+config IRQ_PPI0_ERROR
+ int "PPI0 Error Interrupt"
+ default 7
+config IRQ_PPI1_ERROR
+ int "PPI1 Error Interrupt"
+ default 7
+config IRQ_SPORT0_ERROR
+ int "SPORT0 Error Interrupt"
+ default 7
+config IRQ_SPORT1_ERROR
+ int "SPORT1 Error Interrupt"
+ default 7
+config IRQ_SPI_ERROR
+ int "SPI Error Interrupt"
+ default 7
+config IRQ_UART_ERROR
+ int "UART Error Interrupt"
+ default 7
+config IRQ_RESERVED_ERROR
+ int "Reserved Interrupt"
+ default 7
+config IRQ_DMA1_0
+ int "DMA1 0 Interrupt(PPI1)"
+ default 8
+config IRQ_DMA1_1
+ int "DMA1 1 Interrupt(PPI2)"
+ default 8
+config IRQ_DMA1_2
+ int "DMA1 2 Interrupt"
+ default 8
+config IRQ_DMA1_3
+ int "DMA1 3 Interrupt"
+ default 8
+config IRQ_DMA1_4
+ int "DMA1 4 Interrupt"
+ default 8
+config IRQ_DMA1_5
+ int "DMA1 5 Interrupt"
+ default 8
+config IRQ_DMA1_6
+ int "DMA1 6 Interrupt"
+ default 8
+config IRQ_DMA1_7
+ int "DMA1 7 Interrupt"
+ default 8
+config IRQ_DMA1_8
+ int "DMA1 8 Interrupt"
+ default 8
+config IRQ_DMA1_9
+ int "DMA1 9 Interrupt"
+ default 8
+config IRQ_DMA1_10
+ int "DMA1 10 Interrupt"
+ default 8
+config IRQ_DMA1_11
+ int "DMA1 11 Interrupt"
+ default 8
+config IRQ_DMA2_0
+ int "DMA2 0 (SPORT0 RX)"
+ default 9
+config IRQ_DMA2_1
+ int "DMA2 1 (SPORT0 TX)"
+ default 9
+config IRQ_DMA2_2
+ int "DMA2 2 (SPORT1 RX)"
+ default 9
+config IRQ_DMA2_3
+ int "DMA2 3 (SPORT2 TX)"
+ default 9
+config IRQ_DMA2_4
+ int "DMA2 4 (SPI)"
+ default 9
+config IRQ_DMA2_5
+ int "DMA2 5 (UART RX)"
+ default 9
+config IRQ_DMA2_6
+ int "DMA2 6 (UART TX)"
+ default 9
+config IRQ_DMA2_7
+ int "DMA2 7 Interrupt"
+ default 9
+config IRQ_DMA2_8
+ int "DMA2 8 Interrupt"
+ default 9
+config IRQ_DMA2_9
+ int "DMA2 9 Interrupt"
+ default 9
+config IRQ_DMA2_10
+ int "DMA2 10 Interrupt"
+ default 9
+config IRQ_DMA2_11
+ int "DMA2 11 Interrupt"
+ default 9
+config IRQ_TIMER0
+ int "TIMER 0 Interrupt"
+ default 10
+config IRQ_TIMER1
+ int "TIMER 1 Interrupt"
+ default 10
+config IRQ_TIMER2
+ int "TIMER 2 Interrupt"
+ default 10
+config IRQ_TIMER3
+ int "TIMER 3 Interrupt"
+ default 10
+config IRQ_TIMER4
+ int "TIMER 4 Interrupt"
+ default 10
+config IRQ_TIMER5
+ int "TIMER 5 Interrupt"
+ default 10
+config IRQ_TIMER6
+ int "TIMER 6 Interrupt"
+ default 10
+config IRQ_TIMER7
+ int "TIMER 7 Interrupt"
+ default 10
+config IRQ_TIMER8
+ int "TIMER 8 Interrupt"
+ default 10
+config IRQ_TIMER9
+ int "TIMER 9 Interrupt"
+ default 10
+config IRQ_TIMER10
+ int "TIMER 10 Interrupt"
+ default 10
+config IRQ_TIMER11
+ int "TIMER 11 Interrupt"
+ default 10
+config IRQ_PROG0_INTA
+ int "Programmable Flags0 A (8)"
+ default 11
+config IRQ_PROG0_INTB
+ int "Programmable Flags0 B (8)"
+ default 11
+config IRQ_PROG1_INTA
+ int "Programmable Flags1 A (8)"
+ default 11
+config IRQ_PROG1_INTB
+ int "Programmable Flags1 B (8)"
+ default 11
+config IRQ_PROG2_INTA
+ int "Programmable Flags2 A (8)"
+ default 11
+config IRQ_PROG2_INTB
+ int "Programmable Flags2 B (8)"
+ default 11
+config IRQ_DMA1_WRRD0
+ int "MDMA1 0 write/read INT"
+ default 8
+config IRQ_DMA1_WRRD1
+ int "MDMA1 1 write/read INT"
+ default 8
+config IRQ_DMA2_WRRD0
+ int "MDMA2 0 write/read INT"
+ default 9
+config IRQ_DMA2_WRRD1
+ int "MDMA2 1 write/read INT"
+ default 9
+config IRQ_IMDMA_WRRD0
+ int "IMDMA 0 write/read INT"
+ default 12
+config IRQ_IMDMA_WRRD1
+ int "IMDMA 1 write/read INT"
+ default 12
+config IRQ_WDTIMER
+ int "Watch Dog Timer"
+ default 13
+
+ help
+ Enter the priority numbers between 7-13 ONLY. Others are Reserved.
+ This applies to all the above. It is not recommended to assign the
+ highest priority number 7 to UART or any other device.
+
+endmenu
+
+endmenu
+
+endif
diff --git a/arch/blackfin/mach-bf561/Makefile b/arch/blackfin/mach-bf561/Makefile
new file mode 100644
index 0000000..57f475a
--- /dev/null
+++ b/arch/blackfin/mach-bf561/Makefile
@@ -0,0 +1,9 @@
+#
+# arch/blackfin/mach-bf561/Makefile
+#
+
+extra-y := head.o
+
+obj-y := ints-priority.o
+
+obj-$(CONFIG_BF561_COREB) += coreb.o
diff --git a/arch/blackfin/mach-bf561/boards/Makefile b/arch/blackfin/mach-bf561/boards/Makefile
new file mode 100644
index 0000000..886edc7
--- /dev/null
+++ b/arch/blackfin/mach-bf561/boards/Makefile
@@ -0,0 +1,7 @@
+#
+# arch/blackfin/mach-bf561/boards/Makefile
+#
+
+obj-$(CONFIG_GENERIC_BOARD) += generic_board.o
+obj-$(CONFIG_BFIN561_EZKIT) += ezkit.o
+obj-$(CONFIG_BFIN561_BLUETECHNIX_CM) += cm_bf561.o
diff --git a/arch/blackfin/mach-bf561/boards/cm_bf561.c b/arch/blackfin/mach-bf561/boards/cm_bf561.c
new file mode 100644
index 0000000..6824e95
--- /dev/null
+++ b/arch/blackfin/mach-bf561/boards/cm_bf561.c
@@ -0,0 +1,289 @@
+/*
+ * File: arch/blackfin/mach-bf533/boards/cm_bf561.c
+ * Based on: arch/blackfin/mach-bf533/boards/ezkit.c
+ * Author: Aidan Williams <aidan@nicta.com.au> Copright 2005
+ *
+ * Created: 2006
+ * Description: Board description file
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#include <linux/usb_isp1362.h>
+#include <asm/irq.h>
+#include <asm/bfin5xx_spi.h>
+
+/*
+ * Name the Board for the /proc/cpuinfo
+ */
+char *bfin_board_name = "Bluetechnix CM BF561";
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+/* all SPI perpherals info goes here */
+
+#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+static struct mtd_partition bfin_spi_flash_partitions[] = {
+ {
+ .name = "bootloader",
+ .size = 0x00020000,
+ .offset = 0,
+ .mask_flags = MTD_CAP_ROM
+ },{
+ .name = "kernel",
+ .size = 0xe0000,
+ .offset = 0x20000
+ },{
+ .name = "file system",
+ .size = 0x700000,
+ .offset = 0x00100000,
+ }
+};
+
+static struct flash_platform_data bfin_spi_flash_data = {
+ .name = "m25p80",
+ .parts = bfin_spi_flash_partitions,
+ .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
+ .type = "m25p64",
+};
+
+/* SPI flash chip (m25p64) */
+static struct bfin5xx_spi_chip spi_flash_chip_info = {
+ .enable_dma = 0, /* use dma transfer with this chip*/
+ .bits_per_word = 8,
+};
+#endif
+
+#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+/* SPI ADC chip */
+static struct bfin5xx_spi_chip spi_adc_chip_info = {
+ .enable_dma = 1, /* use dma transfer with this chip*/
+ .bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
+ .enable_dma = 0,
+ .bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
+static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
+ .enable_dma = 0,
+ .bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+static struct bfin5xx_spi_chip spi_mmc_chip_info = {
+ .enable_dma = 1,
+ .bits_per_word = 8,
+};
+#endif
+
+static struct spi_board_info bfin_spi_board_info[] __initdata = {
+#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+ {
+ /* the modalias must be the same as spi device driver name */
+ .modalias = "m25p80", /* Name of spi_driver for this device */
+ .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1, /* Framework bus number */
+ .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
+ .platform_data = &bfin_spi_flash_data,
+ .controller_data = &spi_flash_chip_info,
+ .mode = SPI_MODE_3,
+ },
+#endif
+
+#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+ {
+ .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
+ .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1, /* Framework bus number */
+ .chip_select = 1, /* Framework chip select. */
+ .platform_data = NULL, /* No spi_driver specific config */
+ .controller_data = &spi_adc_chip_info,
+ },
+#endif
+
+#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+ {
+ .modalias = "ad1836-spi",
+ .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1,
+ .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
+ .controller_data = &ad1836_spi_chip_info,
+ },
+#endif
+#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
+ {
+ .modalias = "ad9960-spi",
+ .max_speed_hz = 10000000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1,
+ .chip_select = 1,
+ .controller_data = &ad9960_spi_chip_info,
+ },
+#endif
+#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+ {
+ .modalias = "spi_mmc",
+ .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1,
+ .chip_select = CONFIG_SPI_MMC_CS_CHAN,
+ .platform_data = NULL,
+ .controller_data = &spi_mmc_chip_info,
+ .mode = SPI_MODE_3,
+ },
+#endif
+};
+
+/* SPI controller data */
+static struct bfin5xx_spi_master spi_bfin_master_info = {
+ .num_chipselect = 8,
+ .enable_dma = 1, /* master has the ability to do dma transfer */
+};
+
+static struct platform_device spi_bfin_master_device = {
+ .name = "bfin-spi-master",
+ .id = 1, /* Bus number */
+ .dev = {
+ .platform_data = &spi_bfin_master_info, /* Passed to driver */
+ },
+};
+#endif /* spi master and devices */
+
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+
+static struct resource smc91x_resources[] = {
+ {
+ .name = "smc91x-regs",
+ .start = 0x28000300,
+ .end = 0x28000300 + 16,
+ .flags = IORESOURCE_MEM,
+ },{
+ .start = IRQ_PF0,
+ .end = IRQ_PF0,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+ },
+};
+static struct platform_device smc91x_device = {
+ .name = "smc91x",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(smc91x_resources),
+ .resource = smc91x_resources,
+};
+#endif
+
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+static struct resource isp1362_hcd_resources[] = {
+ {
+ .start = 0x24008000,
+ .end = 0x24008000,
+ .flags = IORESOURCE_MEM,
+ },{
+ .start = 0x24008004,
+ .end = 0x24008004,
+ .flags = IORESOURCE_MEM,
+ },{
+ .start = IRQ_PF47,
+ .end = IRQ_PF47,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+ },
+};
+
+static struct isp1362_platform_data isp1362_priv = {
+ .sel15Kres = 1,
+ .clknotstop = 0,
+ .oc_enable = 0,
+ .int_act_high = 0,
+ .int_edge_triggered = 0,
+ .remote_wakeup_connected = 0,
+ .no_power_switching = 1,
+ .power_switching_mode = 0,
+};
+
+static struct platform_device isp1362_hcd_device = {
+ .name = "isp1362-hcd",
+ .id = 0,
+ .dev = {
+ .platform_data = &isp1362_priv,
+ },
+ .num_resources = ARRAY_SIZE(isp1362_hcd_resources),
+ .resource = isp1362_hcd_resources,
+};
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+static struct resource bfin_uart_resources[] = {
+ {
+ .start = 0xFFC00400,
+ .end = 0xFFC004FF,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device bfin_uart_device = {
+ .name = "bfin-uart",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(bfin_uart_resources),
+ .resource = bfin_uart_resources,
+};
+#endif
+
+static struct platform_device *cm_bf561_devices[] __initdata = {
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+ &bfin_uart_device,
+#endif
+
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+ &isp1362_hcd_device,
+#endif
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+ &smc91x_device,
+#endif
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+ &spi_bfin_master_device,
+#endif
+
+};
+
+static int __init cm_bf561_init(void)
+{
+ printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__);
+ platform_add_devices(cm_bf561_devices, ARRAY_SIZE(cm_bf561_devices));
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+ spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
+#endif
+ return 0;
+}
+
+arch_initcall(cm_bf561_init);
diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c
new file mode 100644
index 0000000..14eb4f9
--- /dev/null
+++ b/arch/blackfin/mach-bf561/boards/ezkit.c
@@ -0,0 +1,147 @@
+/*
+ * File: arch/blackfin/mach-bf561/ezkit.c
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <asm/irq.h>
+#include <asm/bfin5xx_spi.h>
+
+/*
+ * Name the Board for the /proc/cpuinfo
+ */
+char *bfin_board_name = "ADDS-BF561-EZKIT";
+
+/*
+ * USB-LAN EzExtender board
+ * Driver needs to know address, irq and flag pin.
+ */
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+static struct resource smc91x_resources[] = {
+ {
+ .name = "smc91x-regs",
+ .start = 0x2C010300,
+ .end = 0x2C010300 + 16,
+ .flags = IORESOURCE_MEM,
+ },{
+
+ .start = IRQ_PF9,
+ .end = IRQ_PF9,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+ },
+};
+
+static struct platform_device smc91x_device = {
+ .name = "smc91x",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(smc91x_resources),
+ .resource = smc91x_resources,
+};
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+static struct resource bfin_uart_resources[] = {
+ {
+ .start = 0xFFC00400,
+ .end = 0xFFC004FF,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device bfin_uart_device = {
+ .name = "bfin-uart",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(bfin_uart_resources),
+ .resource = bfin_uart_resources,
+};
+#endif
+
+#ifdef CONFIG_SPI_BFIN
+#if defined(CONFIG_SND_BLACKFIN_AD1836) \
+ || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
+ .enable_dma = 0,
+ .bits_per_word = 16,
+};
+#endif
+#endif
+
+/* SPI controller data */
+static struct bfin5xx_spi_master spi_bfin_master_info = {
+ .num_chipselect = 8,
+ .enable_dma = 1, /* master has the ability to do dma transfer */
+};
+
+static struct platform_device spi_bfin_master_device = {
+ .name = "bfin-spi-master",
+ .id = 1, /* Bus number */
+ .dev = {
+ .platform_data = &spi_bfin_master_info, /* Passed to driver */
+ },
+};
+
+static struct spi_board_info bfin_spi_board_info[] __initdata = {
+#if defined(CONFIG_SND_BLACKFIN_AD1836) \
+ || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+ {
+ .modalias = "ad1836-spi",
+ .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1,
+ .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
+ .controller_data = &ad1836_spi_chip_info,
+ },
+#endif
+};
+
+static struct platform_device *ezkit_devices[] __initdata = {
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+ &smc91x_device,
+#endif
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+ &spi_bfin_master_device,
+#endif
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+ &bfin_uart_device,
+#endif
+};
+
+static int __init ezkit_init(void)
+{
+ int ret;
+
+ printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__);
+ ret = platform_add_devices(ezkit_devices,
+ ARRAY_SIZE(ezkit_devices));
+ if (ret < 0)
+ return ret;
+ return spi_register_board_info(bfin_spi_board_info,
+ ARRAY_SIZE(bfin_spi_board_info));
+}
+
+arch_initcall(ezkit_init);
diff --git a/arch/blackfin/mach-bf561/boards/generic_board.c b/arch/blackfin/mach-bf561/boards/generic_board.c
new file mode 100644
index 0000000..585ecdd
--- /dev/null
+++ b/arch/blackfin/mach-bf561/boards/generic_board.c
@@ -0,0 +1,82 @@
+/*
+ * File: arch/blackfin/mach-bf561/generic_board.c
+ * Based on: arch/blackfin/mach-bf533/ezkit.c
+ * Author: Aidan Williams <aidan@nicta.com.au>
+ *
+ * Created:
+ * Description:
+ *
+ * Modified:
+ * Copyright 2005 National ICT Australia (NICTA)
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <asm/irq.h>
+
+char *bfin_board_name = "UNKNOWN BOARD";
+
+/*
+ * Driver needs to know address, irq and flag pin.
+ */
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+static struct resource smc91x_resources[] = {
+ {
+ .start = 0x2C010300,
+ .end = 0x2C010300 + 16,
+ .flags = IORESOURCE_MEM,
+ },{
+ .start = IRQ_PROG_INTB,
+ .end = IRQ_PROG_INTB,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+ },{
+ /*
+ * denotes the flag pin and is used directly if
+ * CONFIG_IRQCHIP_DEMUX_GPIO is defined.
+ */
+ .start = IRQ_PF9,
+ .end = IRQ_PF9,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+ },
+};
+
+static struct platform_device smc91x_device = {
+ .name = "smc91x",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(smc91x_resources),
+ .resource = smc91x_resources,
+};
+#endif
+
+static struct platform_device *generic_board_devices[] __initdata = {
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+ &smc91x_device,
+#endif
+};
+
+static int __init generic_board_init(void)
+{
+ printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__);
+ return platform_add_devices(generic_board_devices,
+ ARRAY_SIZE(generic_board_devices));
+}
+
+arch_initcall(generic_board_init);
diff --git a/arch/blackfin/mach-bf561/coreb.c b/arch/blackfin/mach-bf561/coreb.c
new file mode 100644
index 0000000..b28582f
--- /dev/null
+++ b/arch/blackfin/mach-bf561/coreb.c
@@ -0,0 +1,402 @@
+/*
+ * File: arch/blackfin/mach-bf561/coreb.c
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description: Handle CoreB on a BF561
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/mm.h>
+#include <linux/miscdevice.h>
+#include <linux/device.h>
+#include <linux/ioport.h>
+#include <linux/module.h>
+#include <asm/dma.h>
+#include <asm/uaccess.h>
+
+#define MODULE_VER "v0.1"
+
+static spinlock_t coreb_lock;
+static wait_queue_head_t coreb_dma_wait;
+
+#define COREB_IS_OPEN 0x00000001
+#define COREB_IS_RUNNING 0x00000010
+
+#define CMD_COREB_INDEX 1
+#define CMD_COREB_START 2
+#define CMD_COREB_STOP 3
+#define CMD_COREB_RESET 4
+
+#define COREB_MINOR 229
+
+static unsigned long coreb_status = 0;
+static unsigned long coreb_base = 0xff600000;
+static unsigned long coreb_size = 0x4000;
+int coreb_dma_done;
+
+static loff_t coreb_lseek(struct file *file, loff_t offset, int origin);
+static ssize_t coreb_read(struct file *file, char *buf, size_t count,
+ loff_t * ppos);
+static ssize_t coreb_write(struct file *file, const char *buf, size_t count,
+ loff_t * ppos);
+static int coreb_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
+ unsigned long arg);
+static int coreb_open(struct inode *inode, struct file *file);
+static int coreb_release(struct inode *inode, struct file *file);
+
+static irqreturn_t coreb_dma_interrupt(int irq, void *dev_id)
+{
+ clear_dma_irqstat(CH_MEM_STREAM2_DEST);
+ coreb_dma_done = 1;
+ wake_up_interruptible(&coreb_dma_wait);
+ return IRQ_HANDLED;
+}
+
+static ssize_t coreb_write(struct file *file, const char *buf, size_t count,
+ loff_t * ppos)
+{
+ unsigned long p = *ppos;
+ ssize_t wrote = 0;
+
+ if (p + count > coreb_size)
+ return -EFAULT;
+
+ while (count > 0) {
+ int len = count;
+
+ if (len > PAGE_SIZE)
+ len = PAGE_SIZE;
+
+ coreb_dma_done = 0;
+
+ /* Source Channel */
+ set_dma_start_addr(CH_MEM_STREAM2_SRC, (unsigned long)buf);
+ set_dma_x_count(CH_MEM_STREAM2_SRC, len);
+ set_dma_x_modify(CH_MEM_STREAM2_SRC, sizeof(char));
+ set_dma_config(CH_MEM_STREAM2_SRC, RESTART);
+ /* Destination Channel */
+ set_dma_start_addr(CH_MEM_STREAM2_DEST, coreb_base + p);
+ set_dma_x_count(CH_MEM_STREAM2_DEST, len);
+ set_dma_x_modify(CH_MEM_STREAM2_DEST, sizeof(char));
+ set_dma_config(CH_MEM_STREAM2_DEST, WNR | RESTART | DI_EN);
+
+ enable_dma(CH_MEM_STREAM2_SRC);
+ enable_dma(CH_MEM_STREAM2_DEST);
+
+ wait_event_interruptible(coreb_dma_wait, coreb_dma_done);
+
+ disable_dma(CH_MEM_STREAM2_SRC);
+ disable_dma(CH_MEM_STREAM2_DEST);
+
+ count -= len;
+ wrote += len;
+ buf += len;
+ p += len;
+ }
+ *ppos = p;
+ return wrote;
+}
+
+static ssize_t coreb_read(struct file *file, char *buf, size_t count,
+ loff_t * ppos)
+{
+ unsigned long p = *ppos;
+ ssize_t read = 0;
+
+ if ((p + count) > coreb_size)
+ return -EFAULT;
+
+ while (count > 0) {
+ int len = count;
+
+ if (len > PAGE_SIZE)
+ len = PAGE_SIZE;
+
+ coreb_dma_done = 0;
+
+ /* Source Channel */
+ set_dma_start_addr(CH_MEM_STREAM2_SRC, coreb_base + p);
+ set_dma_x_count(CH_MEM_STREAM2_SRC, len);
+ set_dma_x_modify(CH_MEM_STREAM2_SRC, sizeof(char));
+ set_dma_config(CH_MEM_STREAM2_SRC, RESTART);
+ /* Destination Channel */
+ set_dma_start_addr(CH_MEM_STREAM2_DEST, (unsigned long)buf);
+ set_dma_x_count(CH_MEM_STREAM2_DEST, len);
+ set_dma_x_modify(CH_MEM_STREAM2_DEST, sizeof(char));
+ set_dma_config(CH_MEM_STREAM2_DEST, WNR | RESTART | DI_EN);
+
+ enable_dma(CH_MEM_STREAM2_SRC);
+ enable_dma(CH_MEM_STREAM2_DEST);
+
+ wait_event_interruptible(coreb_dma_wait, coreb_dma_done);
+
+ disable_dma(CH_MEM_STREAM2_SRC);
+ disable_dma(CH_MEM_STREAM2_DEST);
+
+ count -= len;
+ read += len;
+ buf += len;
+ p += len;
+ }
+
+ return read;
+}
+
+static loff_t coreb_lseek(struct file *file, loff_t offset, int origin)
+{
+ loff_t ret;
+
+ mutex_lock(&file->f_dentry->d_inode->i_mutex);
+
+ switch (origin) {
+ case 0 /* SEEK_SET */ :
+ if (offset < coreb_size) {
+ file->f_pos = offset;
+ ret = file->f_pos;
+ } else
+ ret = -EINVAL;
+ break;
+ case 1 /* SEEK_CUR */ :
+ if ((offset + file->f_pos) < coreb_size) {
+ file->f_pos += offset;
+ ret = file->f_pos;
+ } else
+ ret = -EINVAL;
+ default:
+ ret = -EINVAL;
+ }
+ mutex_unlock(&file->f_dentry->d_inode->i_mutex);
+ return ret;
+}
+
+static int coreb_open(struct inode *inode, struct file *file)
+{
+ spin_lock_irq(&coreb_lock);
+
+ if (coreb_status & COREB_IS_OPEN)
+ goto out_busy;
+
+ coreb_status |= COREB_IS_OPEN;
+
+ spin_unlock_irq(&coreb_lock);
+ return 0;
+
+ out_busy:
+ spin_unlock_irq(&coreb_lock);
+ return -EBUSY;
+}
+
+static int coreb_release(struct inode *inode, struct file *file)
+{
+ spin_lock_irq(&coreb_lock);
+ coreb_status &= ~COREB_IS_OPEN;
+ spin_unlock_irq(&coreb_lock);
+ return 0;
+}
+
+static int coreb_ioctl(struct inode *inode, struct file *file,
+ unsigned int cmd, unsigned long arg)
+{
+ int retval = 0;
+ int coreb_index = 0;
+
+ switch (cmd) {
+ case CMD_COREB_INDEX:
+ if (copy_from_user(&coreb_index, (int *)arg, sizeof(int))) {
+ retval = -EFAULT;
+ break;
+ }
+
+ spin_lock_irq(&coreb_lock);
+ switch (coreb_index) {
+ case 0:
+ coreb_base = 0xff600000;
+ coreb_size = 0x4000;
+ break;
+ case 1:
+ coreb_base = 0xff610000;
+ coreb_size = 0x4000;
+ break;
+ case 2:
+ coreb_base = 0xff500000;
+ coreb_size = 0x8000;
+ break;
+ case 3:
+ coreb_base = 0xff400000;
+ coreb_size = 0x8000;
+ break;
+ default:
+ retval = -EINVAL;
+ break;
+ }
+ spin_unlock_irq(&coreb_lock);
+
+ mutex_lock(&file->f_dentry->d_inode->i_mutex);
+ file->f_pos = 0;
+ mutex_unlock(&file->f_dentry->d_inode->i_mutex);
+ break;
+ case CMD_COREB_START:
+ spin_lock_irq(&coreb_lock);
+ if (coreb_status & COREB_IS_RUNNING) {
+ retval = -EBUSY;
+ break;
+ }
+ printk(KERN_INFO "Starting Core B\n");
+ coreb_status |= COREB_IS_RUNNING;
+ bfin_write_SICA_SYSCR(bfin_read_SICA_SYSCR() & ~0x0020);
+ SSYNC();
+ spin_lock_irq(&coreb_lock);
+ break;
+#if defined(CONFIG_BF561_COREB_RESET)
+ case CMD_COREB_STOP:
+ spin_lock_irq(&coreb_lock);
+ printk(KERN_INFO "Stopping Core B\n");
+ bfin_write_SICA_SYSCR(bfin_read_SICA_SYSCR() | 0x0020);
+ bfin_write_SICB_SYSCR(bfin_read_SICB_SYSCR() | 0x0080);
+ coreb_status &= ~COREB_IS_RUNNING;
+ spin_lock_irq(&coreb_lock);
+ break;
+ case CMD_COREB_RESET:
+ printk(KERN_INFO "Resetting Core B\n");
+ bfin_write_SICB_SYSCR(bfin_read_SICB_SYSCR() | 0x0080);
+ break;
+#endif
+ }
+
+ return retval;
+}
+
+static struct file_operations coreb_fops = {
+ .owner = THIS_MODULE,
+ .llseek = coreb_lseek,
+ .read = coreb_read,
+ .write = coreb_write,
+ .ioctl = coreb_ioctl,
+ .open = coreb_open,
+ .release = coreb_release
+};
+
+static struct miscdevice coreb_dev = {
+ COREB_MINOR,
+ "coreb",
+ &coreb_fops
+};
+
+static ssize_t coreb_show_status(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf,
+ "Base Address:\t0x%08lx\n"
+ "Core B is %s\n"
+ "SICA_SYSCR:\t%04x\n"
+ "SICB_SYSCR:\t%04x\n"
+ "\n"
+ "IRQ Status:\tCore A\t\tCore B\n"
+ "ISR0:\t\t%08x\t\t%08x\n"
+ "ISR1:\t\t%08x\t\t%08x\n"
+ "IMASK0:\t\t%08x\t\t%08x\n"
+ "IMASK1:\t\t%08x\t\t%08x\n",
+ coreb_base,
+ coreb_status & COREB_IS_RUNNING ? "running" : "stalled",
+ bfin_read_SICA_SYSCR(), bfin_read_SICB_SYSCR(),
+ bfin_read_SICA_ISR0(), bfin_read_SICB_ISR0(),
+ bfin_read_SICA_ISR1(), bfin_read_SICB_ISR0(),
+ bfin_read_SICA_IMASK0(), bfin_read_SICB_IMASK0(),
+ bfin_read_SICA_IMASK1(), bfin_read_SICB_IMASK1());
+}
+
+static DEVICE_ATTR(coreb_status, S_IRUGO, coreb_show_status, NULL);
+
+int __init bf561_coreb_init(void)
+{
+ init_waitqueue_head(&coreb_dma_wait);
+
+ spin_lock_init(&coreb_lock);
+ /* Request the core memory regions for Core B */
+ if (request_mem_region(0xff600000, 0x4000,
+ "Core B - Instruction SRAM") == NULL)
+ goto exit;
+
+ if (request_mem_region(0xFF610000, 0x4000,
+ "Core B - Instruction SRAM") == NULL)
+ goto release_instruction_a_sram;
+
+ if (request_mem_region(0xFF500000, 0x8000,
+ "Core B - Data Bank B SRAM") == NULL)
+ goto release_instruction_b_sram;
+
+ if (request_mem_region(0xff400000, 0x8000,
+ "Core B - Data Bank A SRAM") == NULL)
+ goto release_data_b_sram;
+
+ if (request_dma(CH_MEM_STREAM2_DEST, "Core B - DMA Destination") < 0)
+ goto release_data_a_sram;
+
+ if (request_dma(CH_MEM_STREAM2_SRC, "Core B - DMA Source") < 0)
+ goto release_dma_dest;
+
+ set_dma_callback(CH_MEM_STREAM2_DEST, coreb_dma_interrupt, NULL);
+
+ misc_register(&coreb_dev);
+
+ if (device_create_file(coreb_dev.this_device, &dev_attr_coreb_status))
+ goto release_dma_src;
+
+ printk(KERN_INFO "BF561 Core B driver %s initialized.\n", MODULE_VER);
+ return 0;
+
+ release_dma_src:
+ free_dma(CH_MEM_STREAM2_SRC);
+ release_dma_dest:
+ free_dma(CH_MEM_STREAM2_DEST);
+ release_data_a_sram:
+ release_mem_region(0xff400000, 0x8000);
+ release_data_b_sram:
+ release_mem_region(0xff500000, 0x8000);
+ release_instruction_b_sram:
+ release_mem_region(0xff610000, 0x4000);
+ release_instruction_a_sram:
+ release_mem_region(0xff600000, 0x4000);
+ exit:
+ return -ENOMEM;
+}
+
+void __exit bf561_coreb_exit(void)
+{
+ device_remove_file(coreb_dev.this_device, &dev_attr_coreb_status);
+ misc_deregister(&coreb_dev);
+
+ release_mem_region(0xff610000, 0x4000);
+ release_mem_region(0xff600000, 0x4000);
+ release_mem_region(0xff500000, 0x8000);
+ release_mem_region(0xff400000, 0x8000);
+
+ free_dma(CH_MEM_STREAM2_DEST);
+ free_dma(CH_MEM_STREAM2_SRC);
+}
+
+module_init(bf561_coreb_init);
+module_exit(bf561_coreb_exit);
+
+MODULE_AUTHOR("Bas Vermeulen <bvermeul@blackstar.xs4all.nl>");
+MODULE_DESCRIPTION("BF561 Core B Support");
diff --git a/arch/blackfin/mach-bf561/head.S b/arch/blackfin/mach-bf561/head.S
new file mode 100644
index 0000000..7bca478
--- /dev/null
+++ b/arch/blackfin/mach-bf561/head.S
@@ -0,0 +1,512 @@
+/*
+ * File: arch/blackfin/mach-bf561/head.S
+ * Based on: arch/blackfin/mach-bf533/head.S
+ * Author:
+ *
+ * Created:
+ * Description: BF561 startup file
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/linkage.h>
+#include <asm/blackfin.h>
+#if CONFIG_BFIN_KERNEL_CLOCK
+#include <asm/mach/mem_init.h>
+#endif
+
+.global __rambase
+.global __ramstart
+.global __ramend
+.extern ___bss_stop
+.extern ___bss_start
+.extern _bf53x_relocate_l1_mem
+
+#define INITIAL_STACK 0xFFB01000
+
+.text
+
+ENTRY(__start)
+ENTRY(__stext)
+ /* R0: argument of command line string, passed from uboot, save it */
+ R7 = R0;
+ /* Set the SYSCFG register */
+ R0 = 0x36;
+ SYSCFG = R0; /*Enable Cycle Counter and Nesting Of Interrupts(3rd Bit)*/
+ R0 = 0;
+
+ /*Clear Out All the data and pointer Registers*/
+ R1 = R0;
+ R2 = R0;
+ R3 = R0;
+ R4 = R0;
+ R5 = R0;
+ R6 = R0;
+
+ P0 = R0;
+ P1 = R0;
+ P2 = R0;
+ P3 = R0;
+ P4 = R0;
+ P5 = R0;
+
+ LC0 = r0;
+ LC1 = r0;
+ L0 = r0;
+ L1 = r0;
+ L2 = r0;
+ L3 = r0;
+
+ /* Clear Out All the DAG Registers*/
+ B0 = r0;
+ B1 = r0;
+ B2 = r0;
+ B3 = r0;
+
+ I0 = r0;
+ I1 = r0;
+ I2 = r0;
+ I3 = r0;
+
+ M0 = r0;
+ M1 = r0;
+ M2 = r0;
+ M3 = r0;
+
+ /* Turn off the icache */
+ p0.l = (IMEM_CONTROL & 0xFFFF);
+ p0.h = (IMEM_CONTROL >> 16);
+ R1 = [p0];
+ R0 = ~ENICPLB;
+ R0 = R0 & R1;
+
+ /* Anomaly 05000125 */
+#ifdef ANOMALY_05000125
+ CLI R2;
+ SSYNC;
+#endif
+ [p0] = R0;
+ SSYNC;
+#ifdef ANOMALY_05000125
+ STI R2;
+#endif
+
+ /* Turn off the dcache */
+ p0.l = (DMEM_CONTROL & 0xFFFF);
+ p0.h = (DMEM_CONTROL >> 16);
+ R1 = [p0];
+ R0 = ~ENDCPLB;
+ R0 = R0 & R1;
+
+ /* Anomaly 05000125 */
+#ifdef ANOMALY_05000125
+ CLI R2;
+ SSYNC;
+#endif
+ [p0] = R0;
+ SSYNC;
+#ifdef ANOMALY_05000125
+ STI R2;
+#endif
+
+ /* Initialise UART*/
+ p0.h = hi(UART_LCR);
+ p0.l = lo(UART_LCR);
+ r0 = 0x0(Z);
+ w[p0] = r0.L; /* To enable DLL writes */
+ ssync;
+
+ p0.h = hi(UART_DLL);
+ p0.l = lo(UART_DLL);
+ r0 = 0x0(Z);
+ w[p0] = r0.L;
+ ssync;
+
+ p0.h = hi(UART_DLH);
+ p0.l = lo(UART_DLH);
+ r0 = 0x00(Z);
+ w[p0] = r0.L;
+ ssync;
+
+ p0.h = hi(UART_GCTL);
+ p0.l = lo(UART_GCTL);
+ r0 = 0x0(Z);
+ w[p0] = r0.L; /* To enable UART clock */
+ ssync;
+
+ /* Initialize stack pointer */
+ sp.l = lo(INITIAL_STACK);
+ sp.h = hi(INITIAL_STACK);
+ fp = sp;
+ usp = sp;
+
+ /* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */
+ call _bf53x_relocate_l1_mem;
+#if CONFIG_BFIN_KERNEL_CLOCK
+ call _start_dma_code;
+#endif
+
+ /* Code for initializing Async memory banks */
+
+ p2.h = hi(EBIU_AMBCTL1);
+ p2.l = lo(EBIU_AMBCTL1);
+ r0.h = hi(AMBCTL1VAL);
+ r0.l = lo(AMBCTL1VAL);
+ [p2] = r0;
+ ssync;
+
+ p2.h = hi(EBIU_AMBCTL0);
+ p2.l = lo(EBIU_AMBCTL0);
+ r0.h = hi(AMBCTL0VAL);
+ r0.l = lo(AMBCTL0VAL);
+ [p2] = r0;
+ ssync;
+
+ p2.h = hi(EBIU_AMGCTL);
+ p2.l = lo(EBIU_AMGCTL);
+ r0 = AMGCTLVAL;
+ w[p2] = r0;
+ ssync;
+
+ /* This section keeps the processor in supervisor mode
+ * during kernel boot. Switches to user mode at end of boot.
+ * See page 3-9 of Hardware Reference manual for documentation.
+ */
+
+ /* EVT15 = _real_start */
+
+ p0.l = lo(EVT15);
+ p0.h = hi(EVT15);
+ p1.l = _real_start;
+ p1.h = _real_start;
+ [p0] = p1;
+ csync;
+
+ p0.l = lo(IMASK);
+ p0.h = hi(IMASK);
+ p1.l = IMASK_IVG15;
+ p1.h = 0x0;
+ [p0] = p1;
+ csync;
+
+ raise 15;
+ p0.l = .LWAIT_HERE;
+ p0.h = .LWAIT_HERE;
+ reti = p0;
+#if defined(ANOMALY_05000281)
+ nop; nop; nop;
+#endif
+ rti;
+
+.LWAIT_HERE:
+ jump .LWAIT_HERE;
+
+ENTRY(_real_start)
+ [ -- sp ] = reti;
+ p0.l = lo(WDOGA_CTL);
+ p0.h = hi(WDOGA_CTL);
+ r0 = 0xAD6(z);
+ w[p0] = r0; /* watchdog off for now */
+ ssync;
+
+ /* Code update for BSS size == 0
+ * Zero out the bss region.
+ */
+
+ p1.l = ___bss_start;
+ p1.h = ___bss_start;
+ p2.l = ___bss_stop;
+ p2.h = ___bss_stop;
+ r0 = 0;
+ p2 -= p1;
+ lsetup (.L_clear_bss, .L_clear_bss ) lc0 = p2;
+.L_clear_bss:
+ B[p1++] = r0;
+
+ /* In case there is a NULL pointer reference
+ * Zero out region before stext
+ */
+
+ p1.l = 0x0;
+ p1.h = 0x0;
+ r0.l = __stext;
+ r0.h = __stext;
+ r0 = r0 >> 1;
+ p2 = r0;
+ r0 = 0;
+ lsetup (.L_clear_zero, .L_clear_zero ) lc0 = p2;
+.L_clear_zero:
+ W[p1++] = r0;
+
+/* pass the uboot arguments to the global value command line */
+ R0 = R7;
+ call _cmdline_init;
+
+ p1.l = __rambase;
+ p1.h = __rambase;
+ r0.l = __sdata;
+ r0.h = __sdata;
+ [p1] = r0;
+
+ p1.l = __ramstart;
+ p1.h = __ramstart;
+ p3.l = ___bss_stop;
+ p3.h = ___bss_stop;
+
+ r1 = p3;
+ [p1] = r1;
+
+ /*
+ * load the current thread pointer and stack
+ */
+ r1.l = _init_thread_union;
+ r1.h = _init_thread_union;
+
+ r2.l = 0x2000;
+ r2.h = 0x0000;
+ r1 = r1 + r2;
+ sp = r1;
+ usp = sp;
+ fp = sp;
+ call _start_kernel;
+.L_exit:
+ jump.s .L_exit;
+
+.section .l1.text
+#if CONFIG_BFIN_KERNEL_CLOCK
+ENTRY(_start_dma_code)
+ p0.h = hi(SICA_IWR0);
+ p0.l = lo(SICA_IWR0);
+ r0.l = 0x1;
+ [p0] = r0;
+ SSYNC;
+
+ /*
+ * Set PLL_CTL
+ * - [14:09] = MSEL[5:0] : CLKIN / VCO multiplication factors
+ * - [8] = BYPASS : BYPASS the PLL, run CLKIN into CCLK/SCLK
+ * - [7] = output delay (add 200ps of delay to mem signals)
+ * - [6] = input delay (add 200ps of input delay to mem signals)
+ * - [5] = PDWN : 1=All Clocks off
+ * - [3] = STOPCK : 1=Core Clock off
+ * - [1] = PLL_OFF : 1=Disable Power to PLL
+ * - [0] = DF : 1=Pass CLKIN/2 to PLL / 0=Pass CLKIN to PLL
+ * all other bits set to zero
+ */
+
+ p0.h = hi(PLL_LOCKCNT);
+ p0.l = lo(PLL_LOCKCNT);
+ r0 = 0x300(Z);
+ w[p0] = r0.l;
+ ssync;
+
+ P2.H = hi(EBIU_SDGCTL);
+ P2.L = lo(EBIU_SDGCTL);
+ R0 = [P2];
+ BITSET (R0, 24);
+ [P2] = R0;
+ SSYNC;
+
+ r0 = CONFIG_VCO_MULT & 63; /* Load the VCO multiplier */
+ r0 = r0 << 9; /* Shift it over, */
+ r1 = CLKIN_HALF; /* Do we need to divide CLKIN by 2?*/
+ r0 = r1 | r0;
+ r1 = PLL_BYPASS; /* Bypass the PLL? */
+ r1 = r1 << 8; /* Shift it over */
+ r0 = r1 | r0; /* add them all together */
+
+ p0.h = hi(PLL_CTL);
+ p0.l = lo(PLL_CTL); /* Load the address */
+ cli r2; /* Disable interrupts */
+ ssync;
+ w[p0] = r0.l; /* Set the value */
+ idle; /* Wait for the PLL to stablize */
+ sti r2; /* Enable interrupts */
+
+.Lcheck_again:
+ p0.h = hi(PLL_STAT);
+ p0.l = lo(PLL_STAT);
+ R0 = W[P0](Z);
+ CC = BITTST(R0,5);
+ if ! CC jump .Lcheck_again;
+
+ /* Configure SCLK & CCLK Dividers */
+ r0 = (CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV);
+ p0.h = hi(PLL_DIV);
+ p0.l = lo(PLL_DIV);
+ w[p0] = r0.l;
+ ssync;
+
+ p0.l = lo(EBIU_SDRRC);
+ p0.h = hi(EBIU_SDRRC);
+ r0 = mem_SDRRC;
+ w[p0] = r0.l;
+ ssync;
+
+ p0.l = (EBIU_SDBCTL & 0xFFFF);
+ p0.h = (EBIU_SDBCTL >> 16); /* SDRAM Memory Bank Control Register */
+ r0 = mem_SDBCTL;
+ w[p0] = r0.l;
+ ssync;
+
+ P2.H = hi(EBIU_SDGCTL);
+ P2.L = lo(EBIU_SDGCTL);
+ R0 = [P2];
+ BITCLR (R0, 24);
+ p0.h = hi(EBIU_SDSTAT);
+ p0.l = lo(EBIU_SDSTAT);
+ r2.l = w[p0];
+ cc = bittst(r2,3);
+ if !cc jump .Lskip;
+ NOP;
+ BITSET (R0, 23);
+.Lskip:
+ [P2] = R0;
+ SSYNC;
+
+ R0.L = lo(mem_SDGCTL);
+ R0.H = hi(mem_SDGCTL);
+ R1 = [p2];
+ R1 = R1 | R0;
+ [P2] = R1;
+ SSYNC;
+
+ RTS;
+#endif /* CONFIG_BFIN_KERNEL_CLOCK */
+
+ENTRY(_bfin_reset)
+ /* No more interrupts to be handled*/
+ CLI R6;
+ SSYNC;
+
+#if defined(CONFIG_BFIN_SHARED_FLASH_ENET)
+ p0.h = hi(FIO_INEN);
+ p0.l = lo(FIO_INEN);
+ r0.l = ~(PF1 | PF0);
+ w[p0] = r0.l;
+
+ p0.h = hi(FIO_DIR);
+ p0.l = lo(FIO_DIR);
+ r0.l = (PF1 | PF0);
+ w[p0] = r0.l;
+
+ p0.h = hi(FIO_FLAG_C);
+ p0.l = lo(FIO_FLAG_C);
+ r0.l = (PF1 | PF0);
+ w[p0] = r0.l;
+#endif
+
+ /* Clear the bits 13-15 in SWRST if they werent cleared */
+ p0.h = hi(SICA_SWRST);
+ p0.l = lo(SICA_SWRST);
+ csync;
+ r0.l = w[p0];
+
+ /* Clear the IMASK register */
+ p0.h = hi(IMASK);
+ p0.l = lo(IMASK);
+ r0 = 0x0;
+ [p0] = r0;
+
+ /* Clear the ILAT register */
+ p0.h = hi(ILAT);
+ p0.l = lo(ILAT);
+ r0 = [p0];
+ [p0] = r0;
+ SSYNC;
+
+ /* Disable the WDOG TIMER */
+ p0.h = hi(WDOGA_CTL);
+ p0.l = lo(WDOGA_CTL);
+ r0.l = 0xAD6;
+ w[p0] = r0.l;
+ SSYNC;
+
+ /* Clear the sticky bit incase it is already set */
+ p0.h = hi(WDOGA_CTL);
+ p0.l = lo(WDOGA_CTL);
+ r0.l = 0x8AD6;
+ w[p0] = r0.l;
+ SSYNC;
+
+ /* Program the count value */
+ R0.l = 0x100;
+ R0.h = 0x0;
+ P0.h = hi(WDOGA_CNT);
+ P0.l = lo(WDOGA_CNT);
+ [P0] = R0;
+ SSYNC;
+
+ /* Program WDOG_STAT if necessary */
+ P0.h = hi(WDOGA_CTL);
+ P0.l = lo(WDOGA_CTL);
+ R0 = W[P0](Z);
+ CC = BITTST(R0,1);
+ if !CC JUMP .LWRITESTAT;
+ CC = BITTST(R0,2);
+ if !CC JUMP .LWRITESTAT;
+ JUMP .LSKIP_WRITE;
+
+.LWRITESTAT:
+ /* When watch dog timer is enabled,
+ * a write to STAT will load the contents of CNT to STAT
+ */
+ R0 = 0x0000(z);
+ P0.h = hi(WDOGA_STAT);
+ P0.l = lo(WDOGA_STAT)
+ [P0] = R0;
+ SSYNC;
+
+.LSKIP_WRITE:
+ /* Enable the reset event */
+ P0.h = hi(WDOGA_CTL);
+ P0.l = lo(WDOGA_CTL);
+ R0 = W[P0](Z);
+ BITCLR(R0,1);
+ BITCLR(R0,2);
+ W[P0] = R0.L;
+ SSYNC;
+ NOP;
+
+ /* Enable the wdog counter */
+ R0 = W[P0](Z);
+ BITCLR(R0,4);
+ W[P0] = R0.L;
+ SSYNC;
+
+ IDLE;
+
+ RTS;
+
+.data
+
+/*
+ * Set up the usable of RAM stuff. Size of RAM is determined then
+ * an initial stack set up at the end.
+ */
+
+.align 4
+__rambase:
+.long 0
+__ramstart:
+.long 0
+__ramend:
+.long 0
diff --git a/arch/blackfin/mach-bf561/ints-priority.c b/arch/blackfin/mach-bf561/ints-priority.c
new file mode 100644
index 0000000..89c52ff
--- /dev/null
+++ b/arch/blackfin/mach-bf561/ints-priority.c
@@ -0,0 +1,108 @@
+/*
+ * File: arch/blackfin/mach-bf561/ints-priority.c
+ * Based on: arch/blackfin/mach-bf537/ints-priority.c
+ * Author: Michael Hennerich
+ *
+ * Created:
+ * Description: Set up the interupt priorities
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/module.h>
+#include <asm/blackfin.h>
+#include <asm/irq.h>
+
+void program_IAR(void)
+{
+ /* Program the IAR0 Register with the configured priority */
+ bfin_write_SICA_IAR0(((CONFIG_IRQ_PLL_WAKEUP - 7) << IRQ_PLL_WAKEUP_POS) |
+ ((CONFIG_IRQ_DMA1_ERROR - 7) << IRQ_DMA1_ERROR_POS) |
+ ((CONFIG_IRQ_DMA2_ERROR - 7) << IRQ_DMA2_ERROR_POS) |
+ ((CONFIG_IRQ_IMDMA_ERROR - 7) << IRQ_IMDMA_ERROR_POS) |
+ ((CONFIG_IRQ_PPI0_ERROR - 7) << IRQ_PPI0_ERROR_POS) |
+ ((CONFIG_IRQ_PPI1_ERROR - 7) << IRQ_PPI1_ERROR_POS) |
+ ((CONFIG_IRQ_SPORT0_ERROR - 7) << IRQ_SPORT0_ERROR_POS) |
+ ((CONFIG_IRQ_SPORT1_ERROR - 7) << IRQ_SPORT1_ERROR_POS));
+
+ bfin_write_SICA_IAR1(((CONFIG_IRQ_SPI_ERROR - 7) << IRQ_SPI_ERROR_POS) |
+ ((CONFIG_IRQ_UART_ERROR - 7) << IRQ_UART_ERROR_POS) |
+ ((CONFIG_IRQ_RESERVED_ERROR - 7) << IRQ_RESERVED_ERROR_POS) |
+ ((CONFIG_IRQ_DMA1_0 - 7) << IRQ_DMA1_0_POS) |
+ ((CONFIG_IRQ_DMA1_1 - 7) << IRQ_DMA1_1_POS) |
+ ((CONFIG_IRQ_DMA1_2 - 7) << IRQ_DMA1_2_POS) |
+ ((CONFIG_IRQ_DMA1_3 - 7) << IRQ_DMA1_3_POS) |
+ ((CONFIG_IRQ_DMA1_4 - 7) << IRQ_DMA1_4_POS));
+
+ bfin_write_SICA_IAR2(((CONFIG_IRQ_DMA1_5 - 7) << IRQ_DMA1_5_POS) |
+ ((CONFIG_IRQ_DMA1_6 - 7) << IRQ_DMA1_6_POS) |
+ ((CONFIG_IRQ_DMA1_7 - 7) << IRQ_DMA1_7_POS) |
+ ((CONFIG_IRQ_DMA1_8 - 7) << IRQ_DMA1_8_POS) |
+ ((CONFIG_IRQ_DMA1_9 - 7) << IRQ_DMA1_9_POS) |
+ ((CONFIG_IRQ_DMA1_10 - 7) << IRQ_DMA1_10_POS) |
+ ((CONFIG_IRQ_DMA1_11 - 7) << IRQ_DMA1_11_POS) |
+ ((CONFIG_IRQ_DMA2_0 - 7) << IRQ_DMA2_0_POS));
+
+ bfin_write_SICA_IAR3(((CONFIG_IRQ_DMA2_1 - 7) << IRQ_DMA2_1_POS) |
+ ((CONFIG_IRQ_DMA2_2 - 7) << IRQ_DMA2_2_POS) |
+ ((CONFIG_IRQ_DMA2_3 - 7) << IRQ_DMA2_3_POS) |
+ ((CONFIG_IRQ_DMA2_4 - 7) << IRQ_DMA2_4_POS) |
+ ((CONFIG_IRQ_DMA2_5 - 7) << IRQ_DMA2_5_POS) |
+ ((CONFIG_IRQ_DMA2_6 - 7) << IRQ_DMA2_6_POS) |
+ ((CONFIG_IRQ_DMA2_7 - 7) << IRQ_DMA2_7_POS) |
+ ((CONFIG_IRQ_DMA2_8 - 7) << IRQ_DMA2_8_POS));
+
+ bfin_write_SICA_IAR4(((CONFIG_IRQ_DMA2_9 - 7) << IRQ_DMA2_9_POS) |
+ ((CONFIG_IRQ_DMA2_10 - 7) << IRQ_DMA2_10_POS) |
+ ((CONFIG_IRQ_DMA2_11 - 7) << IRQ_DMA2_11_POS) |
+ ((CONFIG_IRQ_TIMER0 - 7) << IRQ_TIMER0_POS) |
+ ((CONFIG_IRQ_TIMER1 - 7) << IRQ_TIMER1_POS) |
+ ((CONFIG_IRQ_TIMER2 - 7) << IRQ_TIMER2_POS) |
+ ((CONFIG_IRQ_TIMER3 - 7) << IRQ_TIMER3_POS) |
+ ((CONFIG_IRQ_TIMER4 - 7) << IRQ_TIMER4_POS));
+
+ bfin_write_SICA_IAR5(((CONFIG_IRQ_TIMER5 - 7) << IRQ_TIMER5_POS) |
+ ((CONFIG_IRQ_TIMER6 - 7) << IRQ_TIMER6_POS) |
+ ((CONFIG_IRQ_TIMER7 - 7) << IRQ_TIMER7_POS) |
+ ((CONFIG_IRQ_TIMER8 - 7) << IRQ_TIMER8_POS) |
+ ((CONFIG_IRQ_TIMER9 - 7) << IRQ_TIMER9_POS) |
+ ((CONFIG_IRQ_TIMER10 - 7) << IRQ_TIMER10_POS) |
+ ((CONFIG_IRQ_TIMER11 - 7) << IRQ_TIMER11_POS) |
+ ((CONFIG_IRQ_PROG0_INTA - 7) << IRQ_PROG0_INTA_POS));
+
+ bfin_write_SICA_IAR6(((CONFIG_IRQ_PROG0_INTB - 7) << IRQ_PROG0_INTB_POS) |
+ ((CONFIG_IRQ_PROG1_INTA - 7) << IRQ_PROG1_INTA_POS) |
+ ((CONFIG_IRQ_PROG1_INTB - 7) << IRQ_PROG1_INTB_POS) |
+ ((CONFIG_IRQ_PROG2_INTA - 7) << IRQ_PROG2_INTA_POS) |
+ ((CONFIG_IRQ_PROG2_INTB - 7) << IRQ_PROG2_INTB_POS) |
+ ((CONFIG_IRQ_DMA1_WRRD0 - 7) << IRQ_DMA1_WRRD0_POS) |
+ ((CONFIG_IRQ_DMA1_WRRD1 - 7) << IRQ_DMA1_WRRD1_POS) |
+ ((CONFIG_IRQ_DMA2_WRRD0 - 7) << IRQ_DMA2_WRRD0_POS));
+
+ bfin_write_SICA_IAR7(((CONFIG_IRQ_DMA2_WRRD1 - 7) << IRQ_DMA2_WRRD1_POS) |
+ ((CONFIG_IRQ_IMDMA_WRRD0 - 7) << IRQ_IMDMA_WRRD0_POS) |
+ ((CONFIG_IRQ_IMDMA_WRRD1 - 7) << IRQ_IMDMA_WRRD1_POS) |
+ ((CONFIG_IRQ_WDTIMER - 7) << IRQ_WDTIMER_POS) |
+ (0 << IRQ_RESERVED_1_POS) | (0 << IRQ_RESERVED_2_POS) |
+ (0 << IRQ_SUPPLE_0_POS) | (0 << IRQ_SUPPLE_1_POS));
+
+ SSYNC();
+}
diff --git a/arch/blackfin/mach-common/Makefile b/arch/blackfin/mach-common/Makefile
new file mode 100644
index 0000000..d3a4907
--- /dev/null
+++ b/arch/blackfin/mach-common/Makefile
@@ -0,0 +1,12 @@
+#
+# arch/blackfin/mach-common/Makefile
+#
+
+obj-y := \
+ cache.o cacheinit.o cplbhdlr.o cplbmgr.o entry.o \
+ interrupt.o lock.o dpmc.o irqpanic.o
+
+obj-$(CONFIG_CPLB_INFO) += cplbinfo.o
+obj-$(CONFIG_BFIN_SINGLE_CORE) += ints-priority-sc.o
+obj-$(CONFIG_BFIN_DUAL_CORE) += ints-priority-dc.o
+obj-$(CONFIG_PM) += pm.o
diff --git a/arch/blackfin/mach-common/cache.S b/arch/blackfin/mach-common/cache.S
new file mode 100644
index 0000000..bb9446e
--- /dev/null
+++ b/arch/blackfin/mach-common/cache.S
@@ -0,0 +1,253 @@
+/*
+ * File: arch/blackfin/mach-common/cache.S
+ * Based on:
+ * Author: LG Soft India
+ *
+ * Created:
+ * Description: cache control support
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/linkage.h>
+#include <asm/cplb.h>
+#include <asm/entry.h>
+#include <asm/blackfin.h>
+#include <asm/cache.h>
+
+.text
+.align 2
+ENTRY(_cache_invalidate)
+
+ /*
+ * Icache or DcacheA or DcacheB Invalidation
+ * or any combination thereof
+ * R0 has bits
+ * CPLB_ENABLE_ICACHE_P,CPLB_ENABLE_DCACHE_P,CPLB_ENABLE_DCACHE2_P
+ * set as required
+ */
+ [--SP] = R7;
+
+ R7 = R0;
+ CC = BITTST(R7,CPLB_ENABLE_ICACHE_P);
+ IF !CC JUMP .Lno_icache;
+ [--SP] = RETS;
+ CALL _icache_invalidate;
+ RETS = [SP++];
+.Lno_icache:
+ CC = BITTST(R7,CPLB_ENABLE_DCACHE_P);
+ IF !CC JUMP .Lno_dcache_a;
+ R0 = 0; /* specifies bank A */
+ [--SP] = RETS;
+ CALL _dcache_invalidate;
+ RETS = [SP++];
+.Lno_dcache_a:
+ CC = BITTST(R7,CPLB_ENABLE_DCACHE2_P);
+ IF !CC JUMP .Lno_dcache_b;
+ R0 = 0;
+ BITSET(R0, 23); /* specifies bank B */
+ [--SP] = RETS;
+ CALL _dcache_invalidate;
+ RETS = [SP++];
+.Lno_dcache_b:
+ R7 = [SP++];
+ RTS;
+
+/* Invalidate the Entire Instruction cache by
+ * disabling IMC bit
+ */
+ENTRY(_icache_invalidate)
+ENTRY(_invalidate_entire_icache)
+ [--SP] = ( R7:5);
+
+ P0.L = (IMEM_CONTROL & 0xFFFF);
+ P0.H = (IMEM_CONTROL >> 16);
+ R7 = [P0];
+
+ /* Clear the IMC bit , All valid bits in the instruction
+ * cache are set to the invalid state
+ */
+ BITCLR(R7,IMC_P);
+ CLI R6;
+ SSYNC; /* SSYNC required before invalidating cache. */
+ .align 8;
+ [P0] = R7;
+ SSYNC;
+ STI R6;
+
+ /* Configures the instruction cache agian */
+ R6 = (IMC | ENICPLB);
+ R7 = R7 | R6;
+
+ CLI R6;
+ SSYNC; /* SSYNC required before writing to IMEM_CONTROL. */
+ .align 8;
+ [P0] = R7;
+ SSYNC;
+ STI R6;
+
+ ( R7:5) = [SP++];
+ RTS;
+
+/*
+ * blackfin_cache_flush_range(start, end)
+ * Invalidate all cache lines assocoiated with this
+ * area of memory.
+ *
+ * start: Start address
+ * end: End address
+ */
+ENTRY(_blackfin_icache_flush_range)
+ R2 = -L1_CACHE_BYTES;
+ R2 = R0 & R2;
+ P0 = R2;
+ P1 = R1;
+ CSYNC;
+ IFLUSH [P0];
+1:
+ IFLUSH [P0++];
+ CC = P0 < P1 (iu);
+ IF CC JUMP 1b (bp);
+ IFLUSH [P0];
+ SSYNC;
+ RTS;
+
+/*
+ * blackfin_icache_dcache_flush_range(start, end)
+ * FLUSH all cache lines assocoiated with this
+ * area of memory.
+ *
+ * start: Start address
+ * end: End address
+ */
+
+ENTRY(_blackfin_icache_dcache_flush_range)
+ R2 = -L1_CACHE_BYTES;
+ R2 = R0 & R2;
+ P0 = R2;
+ P1 = R1;
+ CSYNC;
+ IFLUSH [P0];
+1:
+ FLUSH [P0];
+ IFLUSH [P0++];
+ CC = P0 < P1 (iu);
+ IF CC JUMP 1b (bp);
+ IFLUSH [P0];
+ FLUSH [P0];
+ SSYNC;
+ RTS;
+
+/* Throw away all D-cached data in specified region without any obligation to
+ * write them back. However, we must clean the D-cached entries around the
+ * boundaries of the start and/or end address is not cache aligned.
+ *
+ * Start: start address,
+ * end : end address.
+ */
+
+ENTRY(_blackfin_dcache_invalidate_range)
+ R2 = -L1_CACHE_BYTES;
+ R2 = R0 & R2;
+ P0 = R2;
+ P1 = R1;
+ CSYNC;
+ FLUSHINV[P0];
+1:
+ FLUSHINV[P0++];
+ CC = P0 < P1 (iu);
+ IF CC JUMP 1b (bp);
+
+ /* If the data crosses a cache line, then we'll be pointing to
+ * the last cache line, but won't have flushed/invalidated it yet,
+ * so do one more.
+ */
+ FLUSHINV[P0];
+ SSYNC;
+ RTS;
+
+/* Invalidate the Entire Data cache by
+ * clearing DMC[1:0] bits
+ */
+ENTRY(_invalidate_entire_dcache)
+ENTRY(_dcache_invalidate)
+ [--SP] = ( R7:6);
+
+ P0.L = (DMEM_CONTROL & 0xFFFF);
+ P0.H = (DMEM_CONTROL >> 16);
+ R7 = [P0];
+
+ /* Clear the DMC[1:0] bits, All valid bits in the data
+ * cache are set to the invalid state
+ */
+ BITCLR(R7,DMC0_P);
+ BITCLR(R7,DMC1_P);
+ CLI R6;
+ SSYNC; /* SSYNC required before writing to DMEM_CONTROL. */
+ .align 8;
+ [P0] = R7;
+ SSYNC;
+ STI R6;
+
+ /* Configures the data cache again */
+
+ R6 = DMEM_CNTR;
+ R7 = R7 | R6;
+
+ CLI R6;
+ SSYNC; /* SSYNC required before writing to DMEM_CONTROL. */
+ .align 8;
+ [P0] = R7;
+ SSYNC;
+ STI R6;
+
+ ( R7:6) = [SP++];
+ RTS;
+
+ENTRY(_blackfin_dcache_flush_range)
+ R2 = -L1_CACHE_BYTES;
+ R2 = R0 & R2;
+ P0 = R2;
+ P1 = R1;
+ CSYNC;
+ FLUSH[P0];
+1:
+ FLUSH[P0++];
+ CC = P0 < P1 (iu);
+ IF CC JUMP 1b (bp);
+
+ /* If the data crosses a cache line, then we'll be pointing to
+ * the last cache line, but won't have flushed it yet, so do
+ * one more.
+ */
+ FLUSH[P0];
+ SSYNC;
+ RTS;
+
+ENTRY(_blackfin_dflush_page)
+ P1 = 1 << (PAGE_SHIFT - L1_CACHE_SHIFT);
+ P0 = R0;
+ CSYNC;
+ FLUSH[P0];
+ LSETUP (.Lfl1, .Lfl1) LC0 = P1;
+.Lfl1: FLUSH [P0++];
+ SSYNC;
+ RTS;
diff --git a/arch/blackfin/mach-common/cacheinit.S b/arch/blackfin/mach-common/cacheinit.S
new file mode 100644
index 0000000..8c17f09
--- /dev/null
+++ b/arch/blackfin/mach-common/cacheinit.S
@@ -0,0 +1,137 @@
+/*
+ * File: arch/blackfin/mach-common/cacheinit.S
+ * Based on:
+ * Author: LG Soft India
+ *
+ * Created: ?
+ * Description: cache initialization
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/* This function sets up the data and instruction cache. The
+ * tables like icplb table, dcplb table and Page Descriptor table
+ * are defined in cplbtab.h. You can configure those tables for
+ * your suitable requirements
+ */
+
+#include <linux/linkage.h>
+#include <asm/blackfin.h>
+
+.text
+
+#if defined(CONFIG_BLKFIN_CACHE)
+ENTRY(_bfin_icache_init)
+
+ /* Initialize Instruction CPLBS */
+
+ I0.L = (ICPLB_ADDR0 & 0xFFFF);
+ I0.H = (ICPLB_ADDR0 >> 16);
+
+ I1.L = (ICPLB_DATA0 & 0xFFFF);
+ I1.H = (ICPLB_DATA0 >> 16);
+
+ I2.L = _icplb_table;
+ I2.H = _icplb_table;
+
+ r1 = -1; /* end point comparison */
+ r3 = 15; /* max counter */
+
+/* read entries from table */
+
+.Lread_iaddr:
+ R0 = [I2++];
+ CC = R0 == R1;
+ IF CC JUMP .Lidone;
+ [I0++] = R0;
+
+.Lread_idata:
+ R2 = [I2++];
+ [I1++] = R2;
+ R3 = R3 + R1;
+ CC = R3 == R1;
+ IF !CC JUMP .Lread_iaddr;
+
+.Lidone:
+ /* Enable Instruction Cache */
+ P0.l = (IMEM_CONTROL & 0xFFFF);
+ P0.h = (IMEM_CONTROL >> 16);
+ R1 = [P0];
+ R0 = (IMC | ENICPLB);
+ R0 = R0 | R1;
+
+ /* Anomaly 05000125 */
+ CLI R2;
+ SSYNC; /* SSYNC required before writing to IMEM_CONTROL. */
+ .align 8;
+ [P0] = R0;
+ SSYNC;
+ STI R2;
+ RTS;
+#endif
+
+#if defined(CONFIG_BLKFIN_DCACHE)
+ENTRY(_bfin_dcache_init)
+
+ /* Initialize Data CPLBS */
+
+ I0.L = (DCPLB_ADDR0 & 0xFFFF);
+ I0.H = (DCPLB_ADDR0 >> 16);
+
+ I1.L = (DCPLB_DATA0 & 0xFFFF);
+ I1.H = (DCPLB_DATA0 >> 16);
+
+ I2.L = _dcplb_table;
+ I2.H = _dcplb_table;
+
+ R1 = -1; /* end point comparison */
+ R3 = 15; /* max counter */
+
+ /* read entries from table */
+.Lread_daddr:
+ R0 = [I2++];
+ cc = R0 == R1;
+ IF CC JUMP .Lddone;
+ [I0++] = R0;
+
+.Lread_ddata:
+ R2 = [I2++];
+ [I1++] = R2;
+ R3 = R3 + R1;
+ CC = R3 == R1;
+ IF !CC JUMP .Lread_daddr;
+.Lddone:
+ P0.L = (DMEM_CONTROL & 0xFFFF);
+ P0.H = (DMEM_CONTROL >> 16);
+ R1 = [P0];
+
+ R0 = DMEM_CNTR;
+
+ R0 = R0 | R1;
+ /* Anomaly 05000125 */
+ CLI R2;
+ SSYNC; /* SSYNC required before writing to DMEM_CONTROL. */
+ .align 8;
+ [P0] = R0;
+ SSYNC;
+ STI R2;
+ RTS;
+#endif
diff --git a/arch/blackfin/mach-common/cplbhdlr.S b/arch/blackfin/mach-common/cplbhdlr.S
new file mode 100644
index 0000000..b979067
--- /dev/null
+++ b/arch/blackfin/mach-common/cplbhdlr.S
@@ -0,0 +1,130 @@
+/*
+ * File: arch/blackfin/mach-common/cplbhdlr.S
+ * Based on:
+ * Author: LG Soft India
+ *
+ * Created: ?
+ * Description: CPLB exception handler
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/linkage.h>
+#include <asm/cplb.h>
+#include <asm/entry.h>
+
+#ifdef CONFIG_EXCPT_IRQ_SYSC_L1
+.section .l1.text
+#else
+.text
+#endif
+
+.type _cplb_mgr, STT_FUNC;
+.type _panic_cplb_error, STT_FUNC;
+
+.align 2
+
+.global __cplb_hdr;
+.type __cplb_hdr, STT_FUNC;
+ENTRY(__cplb_hdr)
+ R2 = SEQSTAT;
+
+ /* Mask the contents of SEQSTAT and leave only EXCAUSE in R2 */
+ R2 <<= 26;
+ R2 >>= 26;
+
+ R1 = 0x23; /* Data access CPLB protection violation */
+ CC = R2 == R1;
+ IF !CC JUMP .Lnot_data_write;
+ R0 = 2; /* is a write to data space*/
+ JUMP .Lis_icplb_miss;
+
+.Lnot_data_write:
+ R1 = 0x2C; /* CPLB miss on an instruction fetch */
+ CC = R2 == R1;
+ R0 = 0; /* is_data_miss == False*/
+ IF CC JUMP .Lis_icplb_miss;
+
+ R1 = 0x26;
+ CC = R2 == R1;
+ IF !CC JUMP .Lunknown;
+
+ R0 = 1; /* is_data_miss == True*/
+
+.Lis_icplb_miss:
+
+#if defined(CONFIG_BLKFIN_CACHE) || defined(CONFIG_BLKFIN_DCACHE)
+# if defined(CONFIG_BLKFIN_CACHE) && !defined(CONFIG_BLKFIN_DCACHE)
+ R1 = CPLB_ENABLE_ICACHE;
+# endif
+# if !defined(CONFIG_BLKFIN_CACHE) && defined(CONFIG_BLKFIN_DCACHE)
+ R1 = CPLB_ENABLE_DCACHE;
+# endif
+# if defined(CONFIG_BLKFIN_CACHE) && defined(CONFIG_BLKFIN_DCACHE)
+ R1 = CPLB_ENABLE_DCACHE | CPLB_ENABLE_ICACHE;
+# endif
+#else
+ R1 = 0;
+#endif
+
+ [--SP] = RETS;
+ CALL _cplb_mgr;
+ RETS = [SP++];
+ CC = R0 == 0;
+ IF !CC JUMP .Lnot_replaced;
+ RTS;
+
+/*
+ * Diagnostic exception handlers
+ */
+.Lunknown:
+ R0 = CPLB_UNKNOWN_ERR;
+ JUMP .Lcplb_error;
+
+.Lnot_replaced:
+ CC = R0 == CPLB_NO_UNLOCKED;
+ IF !CC JUMP .Lnext_check;
+ R0 = CPLB_NO_UNLOCKED;
+ JUMP .Lcplb_error;
+
+.Lnext_check:
+ CC = R0 == CPLB_NO_ADDR_MATCH;
+ IF !CC JUMP .Lnext_check2;
+ R0 = CPLB_NO_ADDR_MATCH;
+ JUMP .Lcplb_error;
+
+.Lnext_check2:
+ CC = R0 == CPLB_PROT_VIOL;
+ IF !CC JUMP .Lstrange_return_from_cplb_mgr;
+ R0 = CPLB_PROT_VIOL;
+ JUMP .Lcplb_error;
+
+.Lstrange_return_from_cplb_mgr:
+ IDLE;
+ CSYNC;
+ JUMP .Lstrange_return_from_cplb_mgr;
+
+.Lcplb_error:
+ R1 = sp;
+ SP += -12;
+ call _panic_cplb_error;
+ SP += 12;
+ JUMP _handle_bad_cplb;
diff --git a/arch/blackfin/mach-common/cplbinfo.c b/arch/blackfin/mach-common/cplbinfo.c
new file mode 100644
index 0000000..d65fac3
--- /dev/null
+++ b/arch/blackfin/mach-common/cplbinfo.c
@@ -0,0 +1,211 @@
+/*
+ * File: arch/blackfin/mach-common/cplbinfo.c
+ * Based on:
+ * Author: Sonic Zhang <sonic.zhang@analog.com>
+ *
+ * Created: Jan. 2005
+ * Description: Display CPLB status
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/proc_fs.h>
+
+#include <asm/current.h>
+#include <asm/uaccess.h>
+#include <asm/system.h>
+
+#include <asm/cplb.h>
+#include <asm/blackfin.h>
+
+#define CPLB_I 1
+#define CPLB_D 2
+
+#define SYNC_SYS SSYNC()
+#define SYNC_CORE CSYNC()
+
+#define CPLB_BIT_PAGESIZE 0x30000
+
+static int page_size_table[4] = {
+ 0x00000400, /* 1K */
+ 0x00001000, /* 4K */
+ 0x00100000, /* 1M */
+ 0x00400000 /* 4M */
+};
+
+static char page_size_string_table[][4] = { "1K", "4K", "1M", "4M" };
+
+static int cplb_find_entry(unsigned long *cplb_addr,
+ unsigned long *cplb_data, unsigned long addr,
+ unsigned long data)
+{
+ int ii;
+
+ for (ii = 0; ii < 16; ii++)
+ if (addr >= cplb_addr[ii] && addr < cplb_addr[ii] +
+ page_size_table[(cplb_data[ii] & CPLB_BIT_PAGESIZE) >> 16]
+ && (cplb_data[ii] == data))
+ return ii;
+
+ return -1;
+}
+
+static char *cplb_print_entry(char *buf, int type)
+{
+ unsigned long *p_addr = dpdt_table;
+ unsigned long *p_data = dpdt_table + 1;
+ unsigned long *p_icount = dpdt_swapcount_table;
+ unsigned long *p_ocount = dpdt_swapcount_table + 1;
+ unsigned long *cplb_addr = (unsigned long *)DCPLB_ADDR0;
+ unsigned long *cplb_data = (unsigned long *)DCPLB_DATA0;
+ int entry = 0, used_cplb = 0;
+
+ if (type == CPLB_I) {
+ buf += sprintf(buf, "Instrction CPLB entry:\n");
+ p_addr = ipdt_table;
+ p_data = ipdt_table + 1;
+ p_icount = ipdt_swapcount_table;
+ p_ocount = ipdt_swapcount_table + 1;
+ cplb_addr = (unsigned long *)ICPLB_ADDR0;
+ cplb_data = (unsigned long *)ICPLB_DATA0;
+ } else
+ buf += sprintf(buf, "Data CPLB entry:\n");
+
+ buf += sprintf(buf, "Address\t\tData\tSize\tValid\tLocked\tSwapin\
+\tiCount\toCount\n");
+
+ while (*p_addr != 0xffffffff) {
+ entry = cplb_find_entry(cplb_addr, cplb_data, *p_addr, *p_data);
+ if (entry >= 0)
+ used_cplb |= 1 << entry;
+
+ buf +=
+ sprintf(buf,
+ "0x%08lx\t0x%05lx\t%s\t%c\t%c\t%2d\t%ld\t%ld\n",
+ *p_addr, *p_data,
+ page_size_string_table[(*p_data & 0x30000) >> 16],
+ (*p_data & CPLB_VALID) ? 'Y' : 'N',
+ (*p_data & CPLB_LOCK) ? 'Y' : 'N', entry, *p_icount,
+ *p_ocount);
+
+ p_addr += 2;
+ p_data += 2;
+ p_icount += 2;
+ p_ocount += 2;
+ }
+
+ if (used_cplb != 0xffff) {
+ buf += sprintf(buf, "Unused/mismatched CPLBs:\n");
+
+ for (entry = 0; entry < 16; entry++)
+ if (0 == ((1 << entry) & used_cplb)) {
+ int flags = cplb_data[entry];
+ buf +=
+ sprintf(buf,
+ "%2d: 0x%08lx\t0x%05x\t%s\t%c\t%c\n",
+ entry, cplb_addr[entry], flags,
+ page_size_string_table[(flags &
+ 0x30000) >>
+ 16],
+ (flags & CPLB_VALID) ? 'Y' : 'N',
+ (flags & CPLB_LOCK) ? 'Y' : 'N');
+ }
+ }
+
+ buf += sprintf(buf, "\n");
+
+ return buf;
+}
+
+static int cplbinfo_proc_output(char *buf)
+{
+ char *p;
+
+ p = buf;
+
+ p += sprintf(p,
+ "------------------ CPLB Information ------------------\n\n");
+
+ if (bfin_read_IMEM_CONTROL() & ENICPLB)
+ p = cplb_print_entry(p, CPLB_I);
+ else
+ p += sprintf(p, "Instruction CPLB is disabled.\n\n");
+
+ if (bfin_read_DMEM_CONTROL() & ENDCPLB)
+ p = cplb_print_entry(p, CPLB_D);
+ else
+ p += sprintf(p, "Data CPLB is disabled.\n");
+
+ return p - buf;
+}
+
+static int cplbinfo_read_proc(char *page, char **start, off_t off,
+ int count, int *eof, void *data)
+{
+ int len;
+
+ len = cplbinfo_proc_output(page);
+ if (len <= off + count)
+ *eof = 1;
+ *start = page + off;
+ len -= off;
+ if (len > count)
+ len = count;
+ if (len < 0)
+ len = 0;
+ return len;
+}
+
+static int cplbinfo_write_proc(struct file *file, const char __user *buffer,
+ unsigned long count, void *data)
+{
+ printk(KERN_INFO "Reset the CPLB swap in/out counts.\n");
+ memset(ipdt_swapcount_table, 0, MAX_SWITCH_I_CPLBS * sizeof(unsigned long));
+ memset(dpdt_swapcount_table, 0, MAX_SWITCH_D_CPLBS * sizeof(unsigned long));
+
+ return count;
+}
+
+static int __init cplbinfo_init(void)
+{
+ struct proc_dir_entry *entry;
+
+ if ((entry = create_proc_entry("cplbinfo", 0, NULL)) == NULL) {
+ return -ENOMEM;
+ }
+
+ entry->read_proc = cplbinfo_read_proc;
+ entry->write_proc = cplbinfo_write_proc;
+ entry->data = NULL;
+
+ return 0;
+}
+
+static void __exit cplbinfo_exit(void)
+{
+ remove_proc_entry("cplbinfo", NULL);
+}
+
+module_init(cplbinfo_init);
+module_exit(cplbinfo_exit);
diff --git a/arch/blackfin/mach-common/cplbmgr.S b/arch/blackfin/mach-common/cplbmgr.S
new file mode 100644
index 0000000..f5efc4b
--- /dev/null
+++ b/arch/blackfin/mach-common/cplbmgr.S
@@ -0,0 +1,607 @@
+/*
+ * File: arch/blackfin/mach-common/cplbmgtr.S
+ * Based on:
+ * Author: LG Soft India
+ *
+ * Created: ?
+ * Description: CPLB replacement routine for CPLB mismatch
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/* Usage: int _cplb_mgr(is_data_miss,int enable_cache)
+ * is_data_miss==2 => Mark as Dirty, write to the clean data page
+ * is_data_miss==1 => Replace a data CPLB.
+ * is_data_miss==0 => Replace an instruction CPLB.
+ *
+ * Returns:
+ * CPLB_RELOADED => Successfully updated CPLB table.
+ * CPLB_NO_UNLOCKED => All CPLBs are locked, so cannot be evicted.
+ * This indicates that the CPLBs in the configuration
+ * tablei are badly configured, as this should never
+ * occur.
+ * CPLB_NO_ADDR_MATCH => The address being accessed, that triggered the
+ * exception, is not covered by any of the CPLBs in
+ * the configuration table. The application is
+ * presumably misbehaving.
+ * CPLB_PROT_VIOL => The address being accessed, that triggered the
+ * exception, was not a first-write to a clean Write
+ * Back Data page, and so presumably is a genuine
+ * violation of the page's protection attributes.
+ * The application is misbehaving.
+ */
+
+#include <linux/linkage.h>
+#include <asm/blackfin.h>
+#include <asm/cplb.h>
+
+#ifdef CONFIG_EXCPT_IRQ_SYSC_L1
+.section .l1.text
+#else
+.text
+#endif
+
+.align 2;
+ENTRY(_cplb_mgr)
+
+ [--SP]=( R7:4,P5:3 );
+
+ CC = R0 == 2;
+ IF CC JUMP .Ldcplb_write;
+
+ CC = R0 == 0;
+ IF !CC JUMP .Ldcplb_miss_compare;
+
+ /* ICPLB Miss Exception. We need to choose one of the
+ * currently-installed CPLBs, and replace it with one
+ * from the configuration table.
+ */
+
+ P4.L = (ICPLB_FAULT_ADDR & 0xFFFF);
+ P4.H = (ICPLB_FAULT_ADDR >> 16);
+
+ P1 = 16;
+ P5.L = _page_size_table;
+ P5.H = _page_size_table;
+
+ P0.L = (ICPLB_DATA0 & 0xFFFF);
+ P0.H = (ICPLB_DATA0 >> 16);
+ R4 = [P4]; /* Get faulting address*/
+ R6 = 64; /* Advance past the fault address, which*/
+ R6 = R6 + R4; /* we'll use if we find a match*/
+ R3 = ((16 << 8) | 2); /* Extract mask, bits 16 and 17.*/
+
+ R5 = 0;
+.Lisearch:
+
+ R1 = [P0-0x100]; /* Address for this CPLB */
+
+ R0 = [P0++]; /* Info for this CPLB*/
+ CC = BITTST(R0,0); /* Is the CPLB valid?*/
+ IF !CC JUMP .Lnomatch; /* Skip it, if not.*/
+ CC = R4 < R1(IU); /* If fault address less than page start*/
+ IF CC JUMP .Lnomatch; /* then skip this one.*/
+ R2 = EXTRACT(R0,R3.L) (Z); /* Get page size*/
+ P1 = R2;
+ P1 = P5 + (P1<<2); /* index into page-size table*/
+ R2 = [P1]; /* Get the page size*/
+ R1 = R1 + R2; /* and add to page start, to get page end*/
+ CC = R4 < R1(IU); /* and see whether fault addr is in page.*/
+ IF !CC R4 = R6; /* If so, advance the address and finish loop.*/
+ IF !CC JUMP .Lisearch_done;
+.Lnomatch:
+ /* Go around again*/
+ R5 += 1;
+ CC = BITTST(R5, 4); /* i.e CC = R5 >= 16*/
+ IF !CC JUMP .Lisearch;
+
+.Lisearch_done:
+ I0 = R4; /* Fault address we'll search for*/
+
+ /* set up pointers */
+ P0.L = (ICPLB_DATA0 & 0xFFFF);
+ P0.H = (ICPLB_DATA0 >> 16);
+
+ /* The replacement procedure for ICPLBs */
+
+ P4.L = (IMEM_CONTROL & 0xFFFF);
+ P4.H = (IMEM_CONTROL >> 16);
+
+ /* disable cplbs */
+ R5 = [P4]; /* Control Register*/
+ BITCLR(R5,ENICPLB_P);
+ CLI R1;
+ SSYNC; /* SSYNC required before writing to IMEM_CONTROL. */
+ .align 8;
+ [P4] = R5;
+ SSYNC;
+ STI R1;
+
+ R1 = -1; /* end point comparison */
+ R3 = 16; /* counter */
+
+ /* Search through CPLBs for first non-locked entry */
+ /* Overwrite it by moving everyone else up by 1 */
+.Licheck_lock:
+ R0 = [P0++];
+ R3 = R3 + R1;
+ CC = R3 == R1;
+ IF CC JUMP .Lall_locked;
+ CC = BITTST(R0, 0); /* an invalid entry is good */
+ IF !CC JUMP .Lifound_victim;
+ CC = BITTST(R0,1); /* but a locked entry isn't */
+ IF CC JUMP .Licheck_lock;
+
+.Lifound_victim:
+#ifdef CONFIG_CPLB_INFO
+ R7 = [P0 - 0x104];
+ P2.L = _ipdt_table;
+ P2.H = _ipdt_table;
+ P3.L = _ipdt_swapcount_table;
+ P3.H = _ipdt_swapcount_table;
+ P3 += -4;
+.Licount:
+ R2 = [P2]; /* address from config table */
+ P2 += 8;
+ P3 += 8;
+ CC = R2==-1;
+ IF CC JUMP .Licount_done;
+ CC = R7==R2;
+ IF !CC JUMP .Licount;
+ R7 = [P3];
+ R7 += 1;
+ [P3] = R7;
+ CSYNC;
+.Licount_done:
+#endif
+ LC0=R3;
+ LSETUP(.Lis_move,.Lie_move) LC0;
+.Lis_move:
+ R0 = [P0];
+ [P0 - 4] = R0;
+ R0 = [P0 - 0x100];
+ [P0-0x104] = R0;
+.Lie_move:P0+=4;
+
+ /* We've made space in the ICPLB table, so that ICPLB15
+ * is now free to be overwritten. Next, we have to determine
+ * which CPLB we need to install, from the configuration
+ * table. This is a matter of getting the start-of-page
+ * addresses and page-lengths from the config table, and
+ * determining whether the fault address falls within that
+ * range.
+ */
+
+ P2.L = _ipdt_table;
+ P2.H = _ipdt_table;
+#ifdef CONFIG_CPLB_INFO
+ P3.L = _ipdt_swapcount_table;
+ P3.H = _ipdt_swapcount_table;
+ P3 += -8;
+#endif
+ P0.L = _page_size_table;
+ P0.H = _page_size_table;
+
+ /* Retrieve our fault address (which may have been advanced
+ * because the faulting instruction crossed a page boundary).
+ */
+
+ R0 = I0;
+
+ /* An extraction pattern, to get the page-size bits from
+ * the CPLB data entry. Bits 16-17, so two bits at posn 16.
+ */
+
+ R1 = ((16<<8)|2);
+.Linext: R4 = [P2++]; /* address from config table */
+ R2 = [P2++]; /* data from config table */
+#ifdef CONFIG_CPLB_INFO
+ P3 += 8;
+#endif
+
+ CC = R4 == -1; /* End of config table*/
+ IF CC JUMP .Lno_page_in_table;
+
+ /* See if failed address > start address */
+ CC = R4 <= R0(IU);
+ IF !CC JUMP .Linext;
+
+ /* extract page size (17:16)*/
+ R3 = EXTRACT(R2, R1.L) (Z);
+
+ /* add page size to addr to get range */
+
+ P5 = R3;
+ P5 = P0 + (P5 << 2); /* scaled, for int access*/
+ R3 = [P5];
+ R3 = R3 + R4;
+
+ /* See if failed address < (start address + page size) */
+ CC = R0 < R3(IU);
+ IF !CC JUMP .Linext;
+
+ /* We've found a CPLB in the config table that covers
+ * the faulting address, so install this CPLB into the
+ * last entry of the table.
+ */
+
+ P1.L = (ICPLB_DATA15 & 0xFFFF); /* ICPLB_DATA15 */
+ P1.H = (ICPLB_DATA15 >> 16);
+ [P1] = R2;
+ [P1-0x100] = R4;
+#ifdef CONFIG_CPLB_INFO
+ R3 = [P3];
+ R3 += 1;
+ [P3] = R3;
+#endif
+
+ /* P4 points to IMEM_CONTROL, and R5 contains its old
+ * value, after we disabled ICPLBS. Re-enable them.
+ */
+
+ BITSET(R5,ENICPLB_P);
+ CLI R2;
+ SSYNC; /* SSYNC required before writing to IMEM_CONTROL. */
+ .align 8;
+ [P4] = R5;
+ SSYNC;
+ STI R2;
+
+ ( R7:4,P5:3 ) = [SP++];
+ R0 = CPLB_RELOADED;
+ RTS;
+
+/* FAILED CASES*/
+.Lno_page_in_table:
+ ( R7:4,P5:3 ) = [SP++];
+ R0 = CPLB_NO_ADDR_MATCH;
+ RTS;
+.Lall_locked:
+ ( R7:4,P5:3 ) = [SP++];
+ R0 = CPLB_NO_UNLOCKED;
+ RTS;
+.Lprot_violation:
+ ( R7:4,P5:3 ) = [SP++];
+ R0 = CPLB_PROT_VIOL;
+ RTS;
+
+.Ldcplb_write:
+
+ /* if a DCPLB is marked as write-back (CPLB_WT==0), and
+ * it is clean (CPLB_DIRTY==0), then a write to the
+ * CPLB's page triggers a protection violation. We have to
+ * mark the CPLB as dirty, to indicate that there are
+ * pending writes associated with the CPLB.
+ */
+
+ P4.L = (DCPLB_STATUS & 0xFFFF);
+ P4.H = (DCPLB_STATUS >> 16);
+ P3.L = (DCPLB_DATA0 & 0xFFFF);
+ P3.H = (DCPLB_DATA0 >> 16);
+ R5 = [P4];
+
+ /* A protection violation can be caused by more than just writes
+ * to a clean WB page, so we have to ensure that:
+ * - It's a write
+ * - to a clean WB page
+ * - and is allowed in the mode the access occurred.
+ */
+
+ CC = BITTST(R5, 16); /* ensure it was a write*/
+ IF !CC JUMP .Lprot_violation;
+
+ /* to check the rest, we have to retrieve the DCPLB.*/
+
+ /* The low half of DCPLB_STATUS is a bit mask*/
+
+ R2 = R5.L (Z); /* indicating which CPLB triggered the event.*/
+ R3 = 30; /* so we can use this to determine the offset*/
+ R2.L = SIGNBITS R2;
+ R2 = R2.L (Z); /* into the DCPLB table.*/
+ R3 = R3 - R2;
+ P4 = R3;
+ P3 = P3 + (P4<<2);
+ R3 = [P3]; /* Retrieve the CPLB*/
+
+ /* Now we can check whether it's a clean WB page*/
+
+ CC = BITTST(R3, 14); /* 0==WB, 1==WT*/
+ IF CC JUMP .Lprot_violation;
+ CC = BITTST(R3, 7); /* 0 == clean, 1 == dirty*/
+ IF CC JUMP .Lprot_violation;
+
+ /* Check whether the write is allowed in the mode that was active.*/
+
+ R2 = 1<<3; /* checking write in user mode*/
+ CC = BITTST(R5, 17); /* 0==was user, 1==was super*/
+ R5 = CC;
+ R2 <<= R5; /* if was super, check write in super mode*/
+ R2 = R3 & R2;
+ CC = R2 == 0;
+ IF CC JUMP .Lprot_violation;
+
+ /* It's a genuine write-to-clean-page.*/
+
+ BITSET(R3, 7); /* mark as dirty*/
+ [P3] = R3; /* and write back.*/
+ NOP;
+ CSYNC;
+ ( R7:4,P5:3 ) = [SP++];
+ R0 = CPLB_RELOADED;
+ RTS;
+
+.Ldcplb_miss_compare:
+
+ /* Data CPLB Miss event. We need to choose a CPLB to
+ * evict, and then locate a new CPLB to install from the
+ * config table, that covers the faulting address.
+ */
+
+ P1.L = (DCPLB_DATA15 & 0xFFFF);
+ P1.H = (DCPLB_DATA15 >> 16);
+
+ P4.L = (DCPLB_FAULT_ADDR & 0xFFFF);
+ P4.H = (DCPLB_FAULT_ADDR >> 16);
+ R4 = [P4];
+ I0 = R4;
+
+ /* The replacement procedure for DCPLBs*/
+
+ R6 = R1; /* Save for later*/
+
+ /* Turn off CPLBs while we work.*/
+ P4.L = (DMEM_CONTROL & 0xFFFF);
+ P4.H = (DMEM_CONTROL >> 16);
+ R5 = [P4];
+ BITCLR(R5,ENDCPLB_P);
+ CLI R0;
+ SSYNC; /* SSYNC required before writing to DMEM_CONTROL. */
+ .align 8;
+ [P4] = R5;
+ SSYNC;
+ STI R0;
+
+ /* Start looking for a CPLB to evict. Our order of preference
+ * is: invalid CPLBs, clean CPLBs, dirty CPLBs. Locked CPLBs
+ * are no good.
+ */
+
+ I1.L = (DCPLB_DATA0 & 0xFFFF);
+ I1.H = (DCPLB_DATA0 >> 16);
+ P1 = 2;
+ P2 = 16;
+ I2.L = _dcplb_preference;
+ I2.H = _dcplb_preference;
+ LSETUP(.Lsdsearch1, .Ledsearch1) LC0 = P1;
+.Lsdsearch1:
+ R0 = [I2++]; /* Get the bits we're interested in*/
+ P0 = I1; /* Go back to start of table*/
+ LSETUP (.Lsdsearch2, .Ledsearch2) LC1 = P2;
+.Lsdsearch2:
+ R1 = [P0++]; /* Fetch each installed CPLB in turn*/
+ R2 = R1 & R0; /* and test for interesting bits.*/
+ CC = R2 == 0; /* If none are set, it'll do.*/
+ IF !CC JUMP .Lskip_stack_check;
+
+ R2 = [P0 - 0x104]; /* R2 - PageStart */
+ P3.L = _page_size_table; /* retrieve end address */
+ P3.H = _page_size_table; /* retrieve end address */
+ R3 = 0x1002; /* 16th - position, 2 bits -length */
+#ifdef ANOMALY_05000209
+ nop; /* Anomaly 05000209 */
+#endif
+ R7 = EXTRACT(R1,R3.l);
+ R7 = R7 << 2; /* Page size index offset */
+ P5 = R7;
+ P3 = P3 + P5;
+ R7 = [P3]; /* page size in bytes */
+
+ R7 = R2 + R7; /* R7 - PageEnd */
+ R4 = SP; /* Test SP is in range */
+
+ CC = R7 < R4; /* if PageEnd < SP */
+ IF CC JUMP .Ldfound_victim;
+ R3 = 0x284; /* stack length from start of trap till
+ * the point.
+ * 20 stack locations for future modifications
+ */
+ R4 = R4 + R3;
+ CC = R4 < R2; /* if SP + stacklen < PageStart */
+ IF CC JUMP .Ldfound_victim;
+.Lskip_stack_check:
+
+.Ledsearch2: NOP;
+.Ledsearch1: NOP;
+
+ /* If we got here, we didn't find a DCPLB we considered
+ * replacable, which means all of them were locked.
+ */
+
+ JUMP .Lall_locked;
+.Ldfound_victim:
+
+#ifdef CONFIG_CPLB_INFO
+ R7 = [P0 - 0x104];
+ P2.L = _dpdt_table;
+ P2.H = _dpdt_table;
+ P3.L = _dpdt_swapcount_table;
+ P3.H = _dpdt_swapcount_table;
+ P3 += -4;
+.Ldicount:
+ R2 = [P2];
+ P2 += 8;
+ P3 += 8;
+ CC = R2==-1;
+ IF CC JUMP .Ldicount_done;
+ CC = R7==R2;
+ IF !CC JUMP .Ldicount;
+ R7 = [P3];
+ R7 += 1;
+ [P3] = R7;
+.Ldicount_done:
+#endif
+
+ /* Clean down the hardware loops*/
+ R2 = 0;
+ LC1 = R2;
+ LC0 = R2;
+
+ /* There's a suitable victim in [P0-4] (because we've
+ * advanced already).
+ */
+
+.LDdoverwrite:
+
+ /* [P0-4] is a suitable victim CPLB, so we want to
+ * overwrite it by moving all the following CPLBs
+ * one space closer to the start.
+ */
+
+ R1.L = (DCPLB_DATA16 & 0xFFFF); /* DCPLB_DATA15 + 4 */
+ R1.H = (DCPLB_DATA16 >> 16);
+ R0 = P0;
+
+ /* If the victim happens to be in DCPLB15,
+ * we don't need to move anything.
+ */
+
+ CC = R1 == R0;
+ IF CC JUMP .Lde_moved;
+ R1 = R1 - R0;
+ R1 >>= 2;
+ P1 = R1;
+ LSETUP(.Lds_move, .Lde_move) LC0=P1;
+.Lds_move:
+ R0 = [P0++]; /* move data */
+ [P0 - 8] = R0;
+ R0 = [P0-0x104] /* move address */
+.Lde_move: [P0-0x108] = R0;
+
+ /* We've now made space in DCPLB15 for the new CPLB to be
+ * installed. The next stage is to locate a CPLB in the
+ * config table that covers the faulting address.
+ */
+
+.Lde_moved:NOP;
+ R0 = I0; /* Our faulting address */
+
+ P2.L = _dpdt_table;
+ P2.H = _dpdt_table;
+#ifdef CONFIG_CPLB_INFO
+ P3.L = _dpdt_swapcount_table;
+ P3.H = _dpdt_swapcount_table;
+ P3 += -8;
+#endif
+
+ P1.L = _page_size_table;
+ P1.H = _page_size_table;
+
+ /* An extraction pattern, to retrieve bits 17:16.*/
+
+ R1 = (16<<8)|2;
+.Ldnext: R4 = [P2++]; /* address */
+ R2 = [P2++]; /* data */
+#ifdef CONFIG_CPLB_INFO
+ P3 += 8;
+#endif
+
+ CC = R4 == -1;
+ IF CC JUMP .Lno_page_in_table;
+
+ /* See if failed address > start address */
+ CC = R4 <= R0(IU);
+ IF !CC JUMP .Ldnext;
+
+ /* extract page size (17:16)*/
+ R3 = EXTRACT(R2, R1.L) (Z);
+
+ /* add page size to addr to get range */
+
+ P5 = R3;
+ P5 = P1 + (P5 << 2);
+ R3 = [P5];
+ R3 = R3 + R4;
+
+ /* See if failed address < (start address + page size) */
+ CC = R0 < R3(IU);
+ IF !CC JUMP .Ldnext;
+
+ /* We've found the CPLB that should be installed, so
+ * write it into CPLB15, masking off any caching bits
+ * if necessary.
+ */
+
+ P1.L = (DCPLB_DATA15 & 0xFFFF);
+ P1.H = (DCPLB_DATA15 >> 16);
+
+ /* If the DCPLB has cache bits set, but caching hasn't
+ * been enabled, then we want to mask off the cache-in-L1
+ * bit before installing. Moreover, if caching is off, we
+ * also want to ensure that the DCPLB has WT mode set, rather
+ * than WB, since WB pages still trigger first-write exceptions
+ * even when not caching is off, and the page isn't marked as
+ * cachable. Finally, we could mark the page as clean, not dirty,
+ * but we choose to leave that decision to the user; if the user
+ * chooses to have a CPLB pre-defined as dirty, then they always
+ * pay the cost of flushing during eviction, but don't pay the
+ * cost of first-write exceptions to mark the page as dirty.
+ */
+
+#ifdef CONFIG_BLKFIN_WT
+ BITSET(R6, 14); /* Set WT*/
+#endif
+
+ [P1] = R2;
+ [P1-0x100] = R4;
+#ifdef CONFIG_CPLB_INFO
+ R3 = [P3];
+ R3 += 1;
+ [P3] = R3;
+#endif
+
+ /* We've installed the CPLB, so re-enable CPLBs. P4
+ * points to DMEM_CONTROL, and R5 is the value we
+ * last wrote to it, when we were disabling CPLBs.
+ */
+
+ BITSET(R5,ENDCPLB_P);
+ CLI R2;
+ .align 8;
+ [P4] = R5;
+ SSYNC;
+ STI R2;
+
+ ( R7:4,P5:3 ) = [SP++];
+ R0 = CPLB_RELOADED;
+ RTS;
+
+.data
+.align 4;
+_page_size_table:
+.byte4 0x00000400; /* 1K */
+.byte4 0x00001000; /* 4K */
+.byte4 0x00100000; /* 1M */
+.byte4 0x00400000; /* 4M */
+
+.align 4;
+_dcplb_preference:
+.byte4 0x00000001; /* valid bit */
+.byte4 0x00000002; /* lock bit */
diff --git a/arch/blackfin/mach-common/dpmc.S b/arch/blackfin/mach-common/dpmc.S
new file mode 100644
index 0000000..97cdcd6
--- /dev/null
+++ b/arch/blackfin/mach-common/dpmc.S
@@ -0,0 +1,418 @@
+/*
+ * File: arch/blackfin/mach-common/dpmc.S
+ * Based on:
+ * Author: LG Soft India
+ *
+ * Created: ?
+ * Description: Watchdog Timer APIs
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/linkage.h>
+#include <asm/blackfin.h>
+#include <asm/mach/irq.h>
+
+.text
+
+ENTRY(_unmask_wdog_wakeup_evt)
+ [--SP] = ( R7:0, P5:0 );
+#if defined(CONFIG_BF561)
+ P0.H = hi(SICA_IWR1);
+ P0.L = lo(SICA_IWR1);
+#else
+ P0.h = (SIC_IWR >> 16);
+ P0.l = (SIC_IWR & 0xFFFF);
+#endif
+ R7 = [P0];
+#if defined(CONFIG_BF561)
+ BITSET(R7, 27);
+#else
+ BITSET(R7,(IRQ_WATCH - IVG7));
+#endif
+ [P0] = R7;
+ SSYNC;
+
+ ( R7:0, P5:0 ) = [SP++];
+ RTS;
+
+.LWRITE_TO_STAT:
+ /* When watch dog timer is enabled, a write to STAT will load the
+ * contents of CNT to STAT
+ */
+ R7 = 0x0000(z);
+#if defined(CONFIG_BF561)
+ P0.h = (WDOGA_STAT >> 16);
+ P0.l = (WDOGA_STAT & 0xFFFF);
+#else
+ P0.h = (WDOG_STAT >> 16);
+ P0.l = (WDOG_STAT & 0xFFFF);
+#endif
+ [P0] = R7;
+ SSYNC;
+ JUMP .LSKIP_WRITE_TO_STAT;
+
+ENTRY(_program_wdog_timer)
+ [--SP] = ( R7:0, P5:0 );
+#if defined(CONFIG_BF561)
+ P0.h = (WDOGA_CNT >> 16);
+ P0.l = (WDOGA_CNT & 0xFFFF);
+#else
+ P0.h = (WDOG_CNT >> 16);
+ P0.l = (WDOG_CNT & 0xFFFF);
+#endif
+ [P0] = R0;
+ SSYNC;
+
+#if defined(CONFIG_BF561)
+ P0.h = (WDOGA_CTL >> 16);
+ P0.l = (WDOGA_CTL & 0xFFFF);
+#else
+ P0.h = (WDOG_CTL >> 16);
+ P0.l = (WDOG_CTL & 0xFFFF);
+#endif
+ R7 = W[P0](Z);
+ CC = BITTST(R7,1);
+ if !CC JUMP .LWRITE_TO_STAT;
+ CC = BITTST(R7,2);
+ if !CC JUMP .LWRITE_TO_STAT;
+
+.LSKIP_WRITE_TO_STAT:
+#if defined(CONFIG_BF561)
+ P0.h = (WDOGA_CTL >> 16);
+ P0.l = (WDOGA_CTL & 0xFFFF);
+#else
+ P0.h = (WDOG_CTL >> 16);
+ P0.l = (WDOG_CTL & 0xFFFF);
+#endif
+ R7 = W[P0](Z);
+ BITCLR(R7,1); /* Enable GP event */
+ BITSET(R7,2);
+ W[P0] = R7.L;
+ SSYNC;
+ NOP;
+
+ R7 = W[P0](Z);
+ BITCLR(R7,4); /* Enable the wdog counter */
+ W[P0] = R7.L;
+ SSYNC;
+
+ ( R7:0, P5:0 ) = [SP++];
+ RTS;
+
+ENTRY(_clear_wdog_wakeup_evt)
+ [--SP] = ( R7:0, P5:0 );
+
+#if defined(CONFIG_BF561)
+ P0.h = (WDOGA_CTL >> 16);
+ P0.l = (WDOGA_CTL & 0xFFFF);
+#else
+ P0.h = (WDOG_CTL >> 16);
+ P0.l = (WDOG_CTL & 0xFFFF);
+#endif
+ R7 = 0x0AD6(Z);
+ W[P0] = R7.L;
+ SSYNC;
+
+ R7 = W[P0](Z);
+ BITSET(R7,15);
+ W[P0] = R7.L;
+ SSYNC;
+
+ R7 = W[P0](Z);
+ BITSET(R7,1);
+ BITSET(R7,2);
+ W[P0] = R7.L;
+ SSYNC;
+
+ ( R7:0, P5:0 ) = [SP++];
+ RTS;
+
+ENTRY(_disable_wdog_timer)
+ [--SP] = ( R7:0, P5:0 );
+#if defined(CONFIG_BF561)
+ P0.h = (WDOGA_CTL >> 16);
+ P0.l = (WDOGA_CTL & 0xFFFF);
+#else
+ P0.h = (WDOG_CTL >> 16);
+ P0.l = (WDOG_CTL & 0xFFFF);
+#endif
+ R7 = 0xAD6(Z);
+ W[P0] = R7.L;
+ SSYNC;
+ ( R7:0, P5:0 ) = [SP++];
+ RTS;
+
+#if !defined(CONFIG_BF561)
+
+.section .l1.text
+
+ENTRY(_sleep_mode)
+ [--SP] = ( R7:0, P5:0 );
+ [--SP] = RETS;
+
+ call _set_sic_iwr;
+
+ R0 = 0xFFFF (Z);
+ call _set_rtc_istat
+
+ P0.H = hi(PLL_CTL);
+ P0.L = lo(PLL_CTL);
+ R1 = W[P0](z);
+ BITSET (R1, 3);
+ W[P0] = R1.L;
+
+ CLI R2;
+ SSYNC;
+ IDLE;
+ STI R2;
+
+ call _test_pll_locked;
+
+ R0 = IWR_ENABLE(0);
+ call _set_sic_iwr;
+
+ P0.H = hi(PLL_CTL);
+ P0.L = lo(PLL_CTL);
+ R7 = w[p0](z);
+ BITCLR (R7, 3);
+ BITCLR (R7, 5);
+ w[p0] = R7.L;
+ IDLE;
+ call _test_pll_locked;
+
+ RETS = [SP++];
+ ( R7:0, P5:0 ) = [SP++];
+ RTS;
+
+ENTRY(_hibernate_mode)
+ [--SP] = ( R7:0, P5:0 );
+ [--SP] = RETS;
+
+ call _set_sic_iwr;
+
+ R0 = 0xFFFF (Z);
+ call _set_rtc_istat
+
+ P0.H = hi(VR_CTL);
+ P0.L = lo(VR_CTL);
+ R1 = W[P0](z);
+ BITSET (R1, 8);
+ BITCLR (R1, 0);
+ BITCLR (R1, 1);
+ W[P0] = R1.L;
+ SSYNC;
+
+ CLI R2;
+ IDLE;
+
+ /* Actually, adding anything may not be necessary...SDRAM contents
+ * are lost
+ */
+
+ENTRY(_deep_sleep)
+ [--SP] = ( R7:0, P5:0 );
+ [--SP] = RETS;
+
+ CLI R4;
+
+ call _set_sic_iwr;
+
+ call _set_sdram_srfs;
+
+ /* Clear all the interrupts,bits sticky */
+ R0 = 0xFFFF (Z);
+ call _set_rtc_istat
+
+ P0.H = hi(PLL_CTL);
+ P0.L = lo(PLL_CTL);
+ R0 = W[P0](z);
+ BITSET (R0, 5);
+ W[P0] = R0.L;
+
+ call _test_pll_locked;
+
+ SSYNC;
+ IDLE;
+
+ call _unset_sdram_srfs;
+
+ call _test_pll_locked;
+
+ R0 = IWR_ENABLE(0);
+ call _set_sic_iwr;
+
+ P0.H = hi(PLL_CTL);
+ P0.L = lo(PLL_CTL);
+ R0 = w[p0](z);
+ BITCLR (R0, 3);
+ BITCLR (R0, 5);
+ BITCLR (R0, 8);
+ w[p0] = R0;
+ IDLE;
+ call _test_pll_locked;
+
+ STI R4;
+
+ RETS = [SP++];
+ ( R7:0, P5:0 ) = [SP++];
+ RTS;
+
+ENTRY(_sleep_deeper)
+ [--SP] = ( R7:0, P5:0 );
+ [--SP] = RETS;
+
+ CLI R4;
+
+ P3 = R0;
+ R0 = IWR_ENABLE(0);
+ call _set_sic_iwr;
+ call _set_sdram_srfs;
+
+ /* Clear all the interrupts,bits sticky */
+ R0 = 0xFFFF (Z);
+ call _set_rtc_istat
+
+ P0.H = hi(PLL_DIV);
+ P0.L = lo(PLL_DIV);
+ R6 = W[P0](z);
+ R0.L = 0xF;
+ W[P0] = R0.l;
+
+ P0.H = hi(PLL_CTL);
+ P0.L = lo(PLL_CTL);
+ R5 = W[P0](z);
+ R0.L = (MIN_VC/CONFIG_CLKIN_HZ) << 9;
+ W[P0] = R0.l;
+
+ SSYNC;
+ IDLE;
+
+ call _test_pll_locked;
+
+ P0.H = hi(VR_CTL);
+ P0.L = lo(VR_CTL);
+ R7 = W[P0](z);
+ R1 = 0x6;
+ R1 <<= 16;
+ R2 = 0x0404(Z);
+ R1 = R1|R2;
+
+ R2 = DEPOSIT(R7, R1);
+ W[P0] = R2;
+
+ SSYNC;
+ IDLE;
+
+ call _test_pll_locked;
+
+ P0.H = hi(PLL_CTL);
+ P0.L = lo(PLL_CTL);
+ R0 = W[P0](z);
+ BITSET (R0, 3);
+ W[P0] = R0.L;
+
+ R0 = P3;
+ call _set_sic_iwr;
+
+ SSYNC;
+ IDLE;
+
+ call _test_pll_locked;
+
+ R0 = IWR_ENABLE(0);
+ call _set_sic_iwr;
+
+ P0.H = hi(VR_CTL);
+ P0.L = lo(VR_CTL);
+ W[P0]= R7;
+
+ SSYNC;
+ IDLE;
+
+ call _test_pll_locked;
+
+ P0.H = hi(PLL_DIV);
+ P0.L = lo(PLL_DIV);
+ W[P0]= R6;
+
+ P0.H = hi(PLL_CTL);
+ P0.L = lo(PLL_CTL);
+ w[p0] = R5;
+ IDLE;
+ call _test_pll_locked;
+
+ call _unset_sdram_srfs;
+
+ STI R4;
+
+ RETS = [SP++];
+ ( R7:0, P5:0 ) = [SP++];
+ RTS;
+
+ENTRY(_set_sdram_srfs)
+ /* set the sdram to self refresh mode */
+ P0.H = hi(EBIU_SDGCTL);
+ P0.L = lo(EBIU_SDGCTL);
+ R2 = [P0];
+ R3.H = hi(SRFS);
+ R3.L = lo(SRFS);
+ R2 = R2|R3;
+ [P0] = R2;
+ ssync;
+ RTS;
+
+ENTRY(_unset_sdram_srfs)
+ /* set the sdram out of self refresh mode */
+ P0.H = hi(EBIU_SDGCTL);
+ P0.L = lo(EBIU_SDGCTL);
+ R2 = [P0];
+ R3.H = hi(SRFS);
+ R3.L = lo(SRFS);
+ R3 = ~R3;
+ R2 = R2&R3;
+ [P0] = R2;
+ ssync;
+ RTS;
+
+ENTRY(_set_sic_iwr)
+ P0.H = hi(SIC_IWR);
+ P0.L = lo(SIC_IWR);
+ [P0] = R0;
+ SSYNC;
+ RTS;
+
+ENTRY(_set_rtc_istat)
+ P0.H = hi(RTC_ISTAT);
+ P0.L = lo(RTC_ISTAT);
+ w[P0] = R0.L;
+ SSYNC;
+ RTS;
+
+ENTRY(_test_pll_locked)
+ P0.H = hi(PLL_STAT);
+ P0.L = lo(PLL_STAT);
+1:
+ R0 = W[P0] (Z);
+ CC = BITTST(R0,5);
+ IF !CC JUMP 1b;
+ RTS;
+#endif
diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S
new file mode 100644
index 0000000..8eb0a90
--- /dev/null
+++ b/arch/blackfin/mach-common/entry.S
@@ -0,0 +1,1207 @@
+/*
+ * File: arch/blackfin/mach-common/entry.S
+ * Based on:
+ * Author: Linus Torvalds
+ *
+ * Created: ?
+ * Description: contains the system-call and fault low-level handling routines.
+ * This also contains the timer-interrupt handler, as well as all
+ * interrupts and faults that can result in a task-switch.
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/*
+ * 25-Dec-2004 - LG Soft India
+ * 1. Fix in return_from_int, to make sure any pending
+ * system call in ILAT for this process to get
+ * executed, otherwise in case context switch happens,
+ * system call of first process (i.e in ILAT) will be
+ * carried forward to the switched process.
+ * 2. Removed Constant references for the following
+ * a. IPEND
+ * b. EXCAUSE mask
+ * c. PAGE Mask
+ */
+
+/*
+ * NOTE: This code handles signal-recognition, which happens every time
+ * after a timer-interrupt and after each system call.
+ */
+
+
+#include <linux/linkage.h>
+#include <asm/blackfin.h>
+#include <asm/unistd.h>
+#include <asm/errno.h>
+#include <asm/thread_info.h> /* TIF_NEED_RESCHED */
+#include <asm/asm-offsets.h>
+
+#include <asm/mach-common/context.S>
+
+#ifdef CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE
+ /*
+ * TODO: this should be proper save/restore, but for now
+ * we'll just cheat and use 0x1/0x13
+ */
+# define DEBUG_START_HWTRACE \
+ P5.l = LO(TBUFCTL); \
+ P5.h = HI(TBUFCTL); \
+ R7 = 0x13; \
+ [P5] = R7;
+# define DEBUG_STOP_HWTRACE \
+ P5.l = LO(TBUFCTL); \
+ P5.h = HI(TBUFCTL); \
+ R7 = 0x01; \
+ [P5] = R7;
+#else
+# define DEBUG_START_HWTRACE
+# define DEBUG_STOP_HWTRACE
+#endif
+
+#ifdef CONFIG_EXCPT_IRQ_SYSC_L1
+.section .l1.text
+#else
+.text
+#endif
+
+/* Slightly simplified and streamlined entry point for CPLB misses.
+ * This one does not lower the level to IRQ5, and thus can be used to
+ * patch up CPLB misses on the kernel stack.
+ */
+ENTRY(_ex_dcplb)
+#if defined(ANOMALY_05000261)
+ /*
+ * Work around an anomaly: if we see a new DCPLB fault, return
+ * without doing anything. Then, if we get the same fault again,
+ * handle it.
+ */
+ p5.l = _last_cplb_fault_retx;
+ p5.h = _last_cplb_fault_retx;
+ r7 = [p5];
+ r6 = retx;
+ [p5] = r6;
+ cc = r6 == r7;
+ if !cc jump _return_from_exception;
+ /* fall through */
+#endif
+
+ENTRY(_ex_icplb)
+ (R7:6,P5:4) = [sp++];
+ ASTAT = [sp++];
+ SAVE_ALL_SYS
+ call __cplb_hdr;
+ DEBUG_START_HWTRACE
+ RESTORE_ALL_SYS
+ SP = RETN;
+ rtx;
+
+ENTRY(_ex_spinlock)
+ /* Transform this into a syscall - twiddle the syscall vector. */
+ p5.l = lo(EVT15);
+ p5.h = hi(EVT15);
+ r7.l = _spinlock_bh;
+ r7.h = _spinlock_bh;
+ [p5] = r7;
+ csync;
+ /* Fall through. */
+
+ENTRY(_ex_syscall)
+ DEBUG_START_HWTRACE
+ (R7:6,P5:4) = [sp++];
+ ASTAT = [sp++];
+ raise 15; /* invoked by TRAP #0, for sys call */
+ sp = retn;
+ rtx
+
+ENTRY(_spinlock_bh)
+ SAVE_ALL_SYS
+ /* To end up here, vector 15 was changed - so we have to change it
+ * back.
+ */
+ p0.l = lo(EVT15);
+ p0.h = hi(EVT15);
+ p1.l = _evt_system_call;
+ p1.h = _evt_system_call;
+ [p0] = p1;
+ csync;
+ r0 = [sp + PT_R0];
+ sp += -12;
+ call _sys_bfin_spinlock;
+ sp += 12;
+ [SP + PT_R0] = R0;
+ RESTORE_ALL_SYS
+ rti;
+
+ENTRY(_ex_soft_bp)
+ r7 = retx;
+ r7 += -2;
+ retx = r7;
+ jump.s _ex_trap_c;
+
+ENTRY(_ex_single_step)
+ r7 = retx;
+ r6 = reti;
+ cc = r7 == r6;
+ if cc jump _return_from_exception
+ r7 = syscfg;
+ bitclr (r7, 0);
+ syscfg = R7;
+
+ p5.l = lo(IPEND);
+ p5.h = hi(IPEND);
+ r6 = [p5];
+ cc = bittst(r6, 5);
+ if !cc jump _ex_trap_c;
+ p4.l = lo(EVT5);
+ p4.h = hi(EVT5);
+ r6.h = _exception_to_level5;
+ r6.l = _exception_to_level5;
+ r7 = [p4];
+ cc = r6 == r7;
+ if !cc jump _ex_trap_c;
+
+_return_from_exception:
+ DEBUG_START_HWTRACE
+ (R7:6,P5:4) = [sp++];
+ ASTAT = [sp++];
+ sp = retn;
+ rtx;
+
+ENTRY(_handle_bad_cplb)
+ /* To get here, we just tried and failed to change a CPLB
+ * so, handle things in trap_c (C code), by lowering to
+ * IRQ5, just like we normally do. Since this is not a
+ * "normal" return path, we have a do alot of stuff to
+ * the stack to get ready so, we can fall through - we
+ * need to make a CPLB exception look like a normal exception
+ */
+
+ DEBUG_START_HWTRACE
+ RESTORE_ALL_SYS
+ [--sp] = ASTAT;
+ [--sp] = (R7:6, P5:4);
+
+ENTRY(_ex_trap_c)
+ /* Call C code (trap_c) to handle the exception, which most
+ * likely involves sending a signal to the current process.
+ * To avoid double faults, lower our priority to IRQ5 first.
+ */
+ P5.h = _exception_to_level5;
+ P5.l = _exception_to_level5;
+ p4.l = lo(EVT5);
+ p4.h = hi(EVT5);
+ [p4] = p5;
+ csync;
+
+ /* Disable all interrupts, but make sure level 5 is enabled so
+ * we can switch to that level. Save the old mask. */
+ cli r6;
+ p4.l = _excpt_saved_imask;
+ p4.h = _excpt_saved_imask;
+ [p4] = r6;
+ r6 = 0x3f;
+ sti r6;
+
+ /* Save the excause into a circular buffer, in case the instruction
+ * which caused this excecptions causes others.
+ */
+ P5.l = _in_ptr_excause;
+ P5.h = _in_ptr_excause;
+ R7 = [P5];
+ R7 += 4;
+ R6 = 0xF;
+ R7 = R7 & R6;
+ [P5] = R7;
+ R6.l = _excause_circ_buf;
+ R6.h = _excause_circ_buf;
+ R7 = R7 + R6;
+ p5 = R7;
+ R6 = SEQSTAT;
+ [P5] = R6;
+
+ DEBUG_START_HWTRACE
+ (R7:6,P5:4) = [sp++];
+ ASTAT = [sp++];
+ SP = RETN;
+ raise 5;
+ rtx;
+
+ENTRY(_exception_to_level5)
+ SAVE_ALL_SYS
+
+ /* Restore interrupt mask. We haven't pushed RETI, so this
+ * doesn't enable interrupts until we return from this handler. */
+ p4.l = _excpt_saved_imask;
+ p4.h = _excpt_saved_imask;
+ r6 = [p4];
+ sti r6;
+
+ /* Restore the hardware error vector. */
+ P5.h = _evt_ivhw;
+ P5.l = _evt_ivhw;
+ p4.l = lo(EVT5);
+ p4.h = hi(EVT5);
+ [p4] = p5;
+ csync;
+
+ p2.l = lo(IPEND);
+ p2.h = hi(IPEND);
+ csync;
+ r0 = [p2]; /* Read current IPEND */
+ [sp + PT_IPEND] = r0; /* Store IPEND */
+
+ /* Pop the excause from the circular buffer and push it on the stack
+ * (in the right place - if you change the location of SEQSTAT, you
+ * must change this offset.
+ */
+.L_excep_to_5_again:
+ P5.l = _out_ptr_excause;
+ P5.h = _out_ptr_excause;
+ R7 = [P5];
+ R7 += 4;
+ R6 = 0xF;
+ R7 = R7 & R6;
+ [P5] = R7;
+ R6.l = _excause_circ_buf;
+ R6.h = _excause_circ_buf;
+ R7 = R7 + R6;
+ P5 = R7;
+ R1 = [P5];
+ [SP + 8] = r1;
+
+ r0 = sp; /* stack frame pt_regs pointer argument ==> r0 */
+ SP += -12;
+ call _trap_c;
+ SP += 12;
+
+ /* See if anything else is in the exception buffer
+ * if there is, process it
+ */
+ P5.l = _out_ptr_excause;
+ P5.h = _out_ptr_excause;
+ P4.l = _in_ptr_excause;
+ P4.h = _in_ptr_excause;
+ R6 = [P5];
+ R7 = [P4];
+ CC = R6 == R7;
+ if ! CC JUMP .L_excep_to_5_again
+
+ call _ret_from_exception;
+ RESTORE_ALL_SYS
+ rti;
+
+ENTRY(_trap) /* Exception: 4th entry into system event table(supervisor mode)*/
+ /* Since the kernel stack can be anywhere, it's not guaranteed to be
+ * covered by a CPLB. Switch to an exception stack; use RETN as a
+ * scratch register (for want of a better option).
+ */
+ retn = sp;
+ sp.l = _exception_stack_top;
+ sp.h = _exception_stack_top;
+ /* Try to deal with syscalls quickly. */
+ [--sp] = ASTAT;
+ [--sp] = (R7:6, P5:4);
+ DEBUG_STOP_HWTRACE
+ r7 = SEQSTAT; /* reason code is in bit 5:0 */
+ r6.l = lo(SEQSTAT_EXCAUSE);
+ r6.h = hi(SEQSTAT_EXCAUSE);
+ r7 = r7 & r6;
+ p5.h = _extable;
+ p5.l = _extable;
+ p4 = r7;
+ p5 = p5 + (p4 << 2);
+ p4 = [p5];
+ jump (p4);
+
+.Lbadsys:
+ r7 = -ENOSYS; /* signextending enough */
+ [sp + PT_R0] = r7; /* return value from system call */
+ jump .Lsyscall_really_exit;
+
+ENTRY(_kernel_execve)
+ link SIZEOF_PTREGS;
+ p0 = sp;
+ r3 = SIZEOF_PTREGS / 4;
+ r4 = 0(x);
+0:
+ [p0++] = r4;
+ r3 += -1;
+ cc = r3 == 0;
+ if !cc jump 0b (bp);
+
+ p0 = sp;
+ sp += -16;
+ [sp + 12] = p0;
+ call _do_execve;
+ SP += 16;
+ cc = r0 == 0;
+ if ! cc jump 1f;
+ /* Success. Copy our temporary pt_regs to the top of the kernel
+ * stack and do a normal exception return.
+ */
+ r1 = sp;
+ r0 = (-KERNEL_STACK_SIZE) (x);
+ r1 = r1 & r0;
+ p2 = r1;
+ p3 = [p2];
+ r0 = KERNEL_STACK_SIZE - 4 (z);
+ p1 = r0;
+ p1 = p1 + p2;
+
+ p0 = fp;
+ r4 = [p0--];
+ r3 = SIZEOF_PTREGS / 4;
+0:
+ r4 = [p0--];
+ [p1--] = r4;
+ r3 += -1;
+ cc = r3 == 0;
+ if ! cc jump 0b (bp);
+
+ r0 = (KERNEL_STACK_SIZE - SIZEOF_PTREGS) (z);
+ p1 = r0;
+ p1 = p1 + p2;
+ sp = p1;
+ r0 = syscfg;
+ [SP + PT_SYSCFG] = r0;
+ [p3 + (TASK_THREAD + THREAD_KSP)] = sp;
+
+ RESTORE_CONTEXT;
+ rti;
+1:
+ unlink;
+ rts;
+
+ENTRY(_system_call)
+ /* Store IPEND */
+ p2.l = lo(IPEND);
+ p2.h = hi(IPEND);
+ csync;
+ r0 = [p2];
+ [sp + PT_IPEND] = r0;
+
+ /* Store RETS for now */
+ r0 = rets;
+ [sp + PT_RESERVED] = r0;
+ /* Set the stack for the current process */
+ r7 = sp;
+ r6.l = lo(ALIGN_PAGE_MASK);
+ r6.h = hi(ALIGN_PAGE_MASK);
+ r7 = r7 & r6; /* thread_info */
+ p2 = r7;
+ p2 = [p2];
+
+ [p2+(TASK_THREAD+THREAD_KSP)] = sp;
+
+ /* Check the System Call */
+ r7 = __NR_syscall;
+ /* System call number is passed in P0 */
+ r6 = p0;
+ cc = r6 < r7;
+ if ! cc jump .Lbadsys;
+
+ /* are we tracing syscalls?*/
+ r7 = sp;
+ r6.l = lo(ALIGN_PAGE_MASK);
+ r6.h = hi(ALIGN_PAGE_MASK);
+ r7 = r7 & r6;
+ p2 = r7;
+ r7 = [p2+TI_FLAGS];
+ CC = BITTST(r7,TIF_SYSCALL_TRACE);
+ if CC JUMP _sys_trace;
+
+ /* Execute the appropriate system call */
+
+ p4 = p0;
+ p5.l = _sys_call_table;
+ p5.h = _sys_call_table;
+ p5 = p5 + (p4 << 2);
+ r0 = [sp + PT_R0];
+ r1 = [sp + PT_R1];
+ r2 = [sp + PT_R2];
+ p5 = [p5];
+
+ [--sp] = r5;
+ [--sp] = r4;
+ [--sp] = r3;
+ SP += -12;
+ call (p5);
+ SP += 24;
+ [sp + PT_R0] = r0;
+
+.Lresume_userspace:
+ r7 = sp;
+ r4.l = lo(ALIGN_PAGE_MASK);
+ r4.h = hi(ALIGN_PAGE_MASK);
+ r7 = r7 & r4; /* thread_info->flags */
+ p5 = r7;
+.Lresume_userspace_1:
+ /* Disable interrupts. */
+ [--sp] = reti;
+ reti = [sp++];
+
+ r7 = [p5 + TI_FLAGS];
+ r4.l = lo(_TIF_WORK_MASK);
+ r4.h = hi(_TIF_WORK_MASK);
+ r7 = r7 & r4;
+
+.Lsyscall_resched:
+ cc = BITTST(r7, TIF_NEED_RESCHED);
+ if !cc jump .Lsyscall_sigpending;
+
+ /* Reenable interrupts. */
+ [--sp] = reti;
+ r0 = [sp++];
+
+ SP += -12;
+ call _schedule;
+ SP += 12;
+
+ jump .Lresume_userspace_1;
+
+.Lsyscall_sigpending:
+ cc = BITTST(r7, TIF_RESTORE_SIGMASK);
+ if cc jump .Lsyscall_do_signals;
+ cc = BITTST(r7, TIF_SIGPENDING);
+ if !cc jump .Lsyscall_really_exit;
+.Lsyscall_do_signals:
+ /* Reenable interrupts. */
+ [--sp] = reti;
+ r0 = [sp++];
+
+ r0 = sp;
+ SP += -12;
+ call _do_signal;
+ SP += 12;
+
+.Lsyscall_really_exit:
+ r5 = [sp + PT_RESERVED];
+ rets = r5;
+ rts;
+
+_sys_trace:
+ call _syscall_trace;
+
+ /* Execute the appropriate system call */
+
+ p4 = [SP + PT_P0];
+ p5.l = _sys_call_table;
+ p5.h = _sys_call_table;
+ p5 = p5 + (p4 << 2);
+ r0 = [sp + PT_R0];
+ r1 = [sp + PT_R1];
+ r2 = [sp + PT_R2];
+ r3 = [sp + PT_R3];
+ r4 = [sp + PT_R4];
+ r5 = [sp + PT_R5];
+ p5 = [p5];
+
+ [--sp] = r5;
+ [--sp] = r4;
+ [--sp] = r3;
+ SP += -12;
+ call (p5);
+ SP += 24;
+ [sp + PT_R0] = r0;
+
+ call _syscall_trace;
+ jump .Lresume_userspace;
+
+ENTRY(_resume)
+ /*
+ * Beware - when entering resume, prev (the current task) is
+ * in r0, next (the new task) is in r1.
+ */
+ p0 = r0;
+ p1 = r1;
+ [--sp] = rets;
+ [--sp] = fp;
+ [--sp] = (r7:4, p5:3);
+
+ /* save usp */
+ p2 = usp;
+ [p0+(TASK_THREAD+THREAD_USP)] = p2;
+
+ /* save current kernel stack pointer */
+ [p0+(TASK_THREAD+THREAD_KSP)] = sp;
+
+ /* save program counter */
+ r1.l = _new_old_task;
+ r1.h = _new_old_task;
+ [p0+(TASK_THREAD+THREAD_PC)] = r1;
+
+ /* restore the kernel stack pointer */
+ sp = [p1+(TASK_THREAD+THREAD_KSP)];
+
+ /* restore user stack pointer */
+ p0 = [p1+(TASK_THREAD+THREAD_USP)];
+ usp = p0;
+
+ /* restore pc */
+ p0 = [p1+(TASK_THREAD+THREAD_PC)];
+ jump (p0);
+
+ /*
+ * Following code actually lands up in a new (old) task.
+ */
+
+_new_old_task:
+ (r7:4, p5:3) = [sp++];
+ fp = [sp++];
+ rets = [sp++];
+
+ /*
+ * When we come out of resume, r0 carries "old" task, becuase we are
+ * in "new" task.
+ */
+ rts;
+
+ENTRY(_ret_from_exception)
+ p2.l = lo(IPEND);
+ p2.h = hi(IPEND);
+
+ csync;
+ r0 = [p2];
+ [sp + PT_IPEND] = r0;
+
+1:
+ r1 = 0x37(Z);
+ r2 = ~r1;
+ r2.h = 0;
+ r0 = r2 & r0;
+ cc = r0 == 0;
+ if !cc jump 4f; /* if not return to user mode, get out */
+
+ /* Make sure any pending system call or deferred exception
+ * return in ILAT for this process to get executed, otherwise
+ * in case context switch happens, system call of
+ * first process (i.e in ILAT) will be carried
+ * forward to the switched process
+ */
+
+ p2.l = lo(ILAT);
+ p2.h = hi(ILAT);
+ r0 = [p2];
+ r1 = (EVT_IVG14 | EVT_IVG15) (z);
+ r0 = r0 & r1;
+ cc = r0 == 0;
+ if !cc jump 5f;
+
+ /* Set the stack for the current process */
+ r7 = sp;
+ r4.l = lo(ALIGN_PAGE_MASK);
+ r4.h = hi(ALIGN_PAGE_MASK);
+ r7 = r7 & r4; /* thread_info->flags */
+ p5 = r7;
+ r7 = [p5 + TI_FLAGS];
+ r4.l = lo(_TIF_WORK_MASK);
+ r4.h = hi(_TIF_WORK_MASK);
+ r7 = r7 & r4;
+ cc = r7 == 0;
+ if cc jump 4f;
+
+ p0.l = lo(EVT15);
+ p0.h = hi(EVT15);
+ p1.l = _schedule_and_signal;
+ p1.h = _schedule_and_signal;
+ [p0] = p1;
+ csync;
+ raise 15; /* raise evt14 to do signal or reschedule */
+4:
+ r0 = syscfg;
+ bitclr(r0, 0);
+ syscfg = r0;
+5:
+ rts;
+
+ENTRY(_return_from_int)
+ /* If someone else already raised IRQ 15, do nothing. */
+ csync;
+ p2.l = lo(ILAT);
+ p2.h = hi(ILAT);
+ r0 = [p2];
+ cc = bittst (r0, EVT_IVG15_P);
+ if cc jump 2f;
+
+ /* if not return to user mode, get out */
+ p2.l = lo(IPEND);
+ p2.h = hi(IPEND);
+ r0 = [p2];
+ r1 = 0x17(Z);
+ r2 = ~r1;
+ r2.h = 0;
+ r0 = r2 & r0;
+ r1 = 1;
+ r1 = r0 - r1;
+ r2 = r0 & r1;
+ cc = r2 == 0;
+ if !cc jump 2f;
+
+ /* Lower the interrupt level to 15. */
+ p0.l = lo(EVT15);
+ p0.h = hi(EVT15);
+ p1.l = _schedule_and_signal_from_int;
+ p1.h = _schedule_and_signal_from_int;
+ [p0] = p1;
+ csync;
+#if defined(ANOMALY_05000281)
+ r0.l = lo(CONFIG_BOOT_LOAD);
+ r0.h = hi(CONFIG_BOOT_LOAD);
+ reti = r0;
+#endif
+ r0 = 0x801f (z);
+ STI r0;
+ raise 15; /* raise evt15 to do signal or reschedule */
+ rti;
+2:
+ rts;
+
+ENTRY(_lower_to_irq14)
+#if defined(ANOMALY_05000281)
+ r0.l = lo(CONFIG_BOOT_LOAD);
+ r0.h = hi(CONFIG_BOOT_LOAD);
+ reti = r0;
+#endif
+ r0 = 0x401f;
+ sti r0;
+ raise 14;
+ rti;
+ENTRY(_evt14_softirq)
+#ifdef CONFIG_DEBUG_HWERR
+ r0 = 0x3f;
+ sti r0;
+#else
+ cli r0;
+#endif
+ [--sp] = RETI;
+ SP += 4;
+ rts;
+
+_schedule_and_signal_from_int:
+ /* To end up here, vector 15 was changed - so we have to change it
+ * back.
+ */
+ p0.l = lo(EVT15);
+ p0.h = hi(EVT15);
+ p1.l = _evt_system_call;
+ p1.h = _evt_system_call;
+ [p0] = p1;
+ csync;
+ p1 = rets;
+ [sp + PT_RESERVED] = p1;
+
+ p0.l = _irq_flags;
+ p0.h = _irq_flags;
+ r0 = [p0];
+ sti r0;
+
+ jump.s .Lresume_userspace;
+
+_schedule_and_signal:
+ SAVE_CONTEXT_SYSCALL
+ /* To end up here, vector 15 was changed - so we have to change it
+ * back.
+ */
+ p0.l = lo(EVT15);
+ p0.h = hi(EVT15);
+ p1.l = _evt_system_call;
+ p1.h = _evt_system_call;
+ [p0] = p1;
+ csync;
+ p0.l = 1f;
+ p0.h = 1f;
+ [sp + PT_RESERVED] = P0;
+ call .Lresume_userspace;
+1:
+ RESTORE_CONTEXT
+ rti;
+
+/* Make sure when we start, that the circular buffer is initialized properly
+ * R0 and P0 are call clobbered, so we can use them here.
+ */
+ENTRY(_init_exception_buff)
+ r0 = 0;
+ p0.h = _in_ptr_excause;
+ p0.l = _in_ptr_excause;
+ [p0] = r0;
+ p0.h = _out_ptr_excause;
+ p0.l = _out_ptr_excause;
+ [p0] = r0;
+ rts;
+
+/*
+ * Put these in the kernel data section - that should always be covered by
+ * a CPLB. This is needed to ensure we don't get double fault conditions
+ */
+
+#ifdef CONFIG_SYSCALL_TAB_L1
+.section .l1.data
+#else
+.data
+#endif
+ALIGN
+_extable:
+ /* entry for each EXCAUSE[5:0]
+ * This table bmust be in sync with the table in ./kernel/traps.c
+ * EXCPT instruction can provide 4 bits of EXCAUSE, allowing 16 to be user defined
+ */
+ .long _ex_syscall; /* 0x00 - User Defined - Linux Syscall */
+ .long _ex_soft_bp /* 0x01 - User Defined - Software breakpoint */
+ .long _ex_trap_c /* 0x02 - User Defined */
+ .long _ex_trap_c /* 0x03 - User Defined - Atomic test and set service */
+ .long _ex_spinlock /* 0x04 - User Defined */
+ .long _ex_trap_c /* 0x05 - User Defined */
+ .long _ex_trap_c /* 0x06 - User Defined */
+ .long _ex_trap_c /* 0x07 - User Defined */
+ .long _ex_trap_c /* 0x08 - User Defined */
+ .long _ex_trap_c /* 0x09 - User Defined */
+ .long _ex_trap_c /* 0x0A - User Defined */
+ .long _ex_trap_c /* 0x0B - User Defined */
+ .long _ex_trap_c /* 0x0C - User Defined */
+ .long _ex_trap_c /* 0x0D - User Defined */
+ .long _ex_trap_c /* 0x0E - User Defined */
+ .long _ex_trap_c /* 0x0F - User Defined */
+ .long _ex_single_step /* 0x10 - HW Single step */
+ .long _ex_trap_c /* 0x11 - Trace Buffer Full */
+ .long _ex_trap_c /* 0x12 - Reserved */
+ .long _ex_trap_c /* 0x13 - Reserved */
+ .long _ex_trap_c /* 0x14 - Reserved */
+ .long _ex_trap_c /* 0x15 - Reserved */
+ .long _ex_trap_c /* 0x16 - Reserved */
+ .long _ex_trap_c /* 0x17 - Reserved */
+ .long _ex_trap_c /* 0x18 - Reserved */
+ .long _ex_trap_c /* 0x19 - Reserved */
+ .long _ex_trap_c /* 0x1A - Reserved */
+ .long _ex_trap_c /* 0x1B - Reserved */
+ .long _ex_trap_c /* 0x1C - Reserved */
+ .long _ex_trap_c /* 0x1D - Reserved */
+ .long _ex_trap_c /* 0x1E - Reserved */
+ .long _ex_trap_c /* 0x1F - Reserved */
+ .long _ex_trap_c /* 0x20 - Reserved */
+ .long _ex_trap_c /* 0x21 - Undefined Instruction */
+ .long _ex_trap_c /* 0x22 - Illegal Instruction Combination */
+ .long _ex_dcplb /* 0x23 - Data CPLB Protection Violation */
+ .long _ex_trap_c /* 0x24 - Data access misaligned */
+ .long _ex_trap_c /* 0x25 - Unrecoverable Event */
+ .long _ex_dcplb /* 0x26 - Data CPLB Miss */
+ .long _ex_trap_c /* 0x27 - Data CPLB Multiple Hits - Linux Trap Zero */
+ .long _ex_trap_c /* 0x28 - Emulation Watchpoint */
+ .long _ex_trap_c /* 0x29 - Instruction fetch access error (535 only) */
+ .long _ex_trap_c /* 0x2A - Instruction fetch misaligned */
+ .long _ex_icplb /* 0x2B - Instruction CPLB protection Violation */
+ .long _ex_icplb /* 0x2C - Instruction CPLB miss */
+ .long _ex_trap_c /* 0x2D - Instruction CPLB Multiple Hits */
+ .long _ex_trap_c /* 0x2E - Illegal use of Supervisor Resource */
+ .long _ex_trap_c /* 0x2E - Illegal use of Supervisor Resource */
+ .long _ex_trap_c /* 0x2F - Reserved */
+ .long _ex_trap_c /* 0x30 - Reserved */
+ .long _ex_trap_c /* 0x31 - Reserved */
+ .long _ex_trap_c /* 0x32 - Reserved */
+ .long _ex_trap_c /* 0x33 - Reserved */
+ .long _ex_trap_c /* 0x34 - Reserved */
+ .long _ex_trap_c /* 0x35 - Reserved */
+ .long _ex_trap_c /* 0x36 - Reserved */
+ .long _ex_trap_c /* 0x37 - Reserved */
+ .long _ex_trap_c /* 0x38 - Reserved */
+ .long _ex_trap_c /* 0x39 - Reserved */
+ .long _ex_trap_c /* 0x3A - Reserved */
+ .long _ex_trap_c /* 0x3B - Reserved */
+ .long _ex_trap_c /* 0x3C - Reserved */
+ .long _ex_trap_c /* 0x3D - Reserved */
+ .long _ex_trap_c /* 0x3E - Reserved */
+ .long _ex_trap_c /* 0x3F - Reserved */
+
+ALIGN
+ENTRY(_sys_call_table)
+ .long _sys_ni_syscall /* 0 - old "setup()" system call*/
+ .long _sys_exit
+ .long _sys_fork
+ .long _sys_read
+ .long _sys_write
+ .long _sys_open /* 5 */
+ .long _sys_close
+ .long _sys_ni_syscall /* old waitpid */
+ .long _sys_creat
+ .long _sys_link
+ .long _sys_unlink /* 10 */
+ .long _sys_execve
+ .long _sys_chdir
+ .long _sys_time
+ .long _sys_mknod
+ .long _sys_chmod /* 15 */
+ .long _sys_chown /* chown16 */
+ .long _sys_ni_syscall /* old break syscall holder */
+ .long _sys_ni_syscall /* old stat */
+ .long _sys_lseek
+ .long _sys_getpid /* 20 */
+ .long _sys_mount
+ .long _sys_ni_syscall /* old umount */
+ .long _sys_setuid
+ .long _sys_getuid
+ .long _sys_stime /* 25 */
+ .long _sys_ptrace
+ .long _sys_alarm
+ .long _sys_ni_syscall /* old fstat */
+ .long _sys_pause
+ .long _sys_ni_syscall /* old utime */ /* 30 */
+ .long _sys_ni_syscall /* old stty syscall holder */
+ .long _sys_ni_syscall /* old gtty syscall holder */
+ .long _sys_access
+ .long _sys_nice
+ .long _sys_ni_syscall /* 35 */ /* old ftime syscall holder */
+ .long _sys_sync
+ .long _sys_kill
+ .long _sys_rename
+ .long _sys_mkdir
+ .long _sys_rmdir /* 40 */
+ .long _sys_dup
+ .long _sys_pipe
+ .long _sys_times
+ .long _sys_ni_syscall /* old prof syscall holder */
+ .long _sys_brk /* 45 */
+ .long _sys_setgid
+ .long _sys_getgid
+ .long _sys_ni_syscall /* old sys_signal */
+ .long _sys_geteuid /* geteuid16 */
+ .long _sys_getegid /* getegid16 */ /* 50 */
+ .long _sys_acct
+ .long _sys_umount /* recycled never used phys() */
+ .long _sys_ni_syscall /* old lock syscall holder */
+ .long _sys_ioctl
+ .long _sys_fcntl /* 55 */
+ .long _sys_ni_syscall /* old mpx syscall holder */
+ .long _sys_setpgid
+ .long _sys_ni_syscall /* old ulimit syscall holder */
+ .long _sys_ni_syscall /* old old uname */
+ .long _sys_umask /* 60 */
+ .long _sys_chroot
+ .long _sys_ustat
+ .long _sys_dup2
+ .long _sys_getppid
+ .long _sys_getpgrp /* 65 */
+ .long _sys_setsid
+ .long _sys_ni_syscall /* old sys_sigaction */
+ .long _sys_sgetmask
+ .long _sys_ssetmask
+ .long _sys_setreuid /* setreuid16 */ /* 70 */
+ .long _sys_setregid /* setregid16 */
+ .long _sys_ni_syscall /* old sys_sigsuspend */
+ .long _sys_ni_syscall /* old sys_sigpending */
+ .long _sys_sethostname
+ .long _sys_setrlimit /* 75 */
+ .long _sys_ni_syscall /* old getrlimit */
+ .long _sys_getrusage
+ .long _sys_gettimeofday
+ .long _sys_settimeofday
+ .long _sys_getgroups /* getgroups16 */ /* 80 */
+ .long _sys_setgroups /* setgroups16 */
+ .long _sys_ni_syscall /* old_select */
+ .long _sys_symlink
+ .long _sys_ni_syscall /* old lstat */
+ .long _sys_readlink /* 85 */
+ .long _sys_uselib
+ .long _sys_ni_syscall /* sys_swapon */
+ .long _sys_reboot
+ .long _sys_ni_syscall /* old_readdir */
+ .long _sys_ni_syscall /* sys_mmap */ /* 90 */
+ .long _sys_munmap
+ .long _sys_truncate
+ .long _sys_ftruncate
+ .long _sys_fchmod
+ .long _sys_fchown /* fchown16 */ /* 95 */
+ .long _sys_getpriority
+ .long _sys_setpriority
+ .long _sys_ni_syscall /* old profil syscall holder */
+ .long _sys_statfs
+ .long _sys_fstatfs /* 100 */
+ .long _sys_ni_syscall
+ .long _sys_ni_syscall /* old sys_socketcall */
+ .long _sys_syslog
+ .long _sys_setitimer
+ .long _sys_getitimer /* 105 */
+ .long _sys_newstat
+ .long _sys_newlstat
+ .long _sys_newfstat
+ .long _sys_ni_syscall /* old uname */
+ .long _sys_ni_syscall /* iopl for i386 */ /* 110 */
+ .long _sys_vhangup
+ .long _sys_ni_syscall /* obsolete idle() syscall */
+ .long _sys_ni_syscall /* vm86old for i386 */
+ .long _sys_wait4
+ .long _sys_ni_syscall /* 115 */ /* sys_swapoff */
+ .long _sys_sysinfo
+ .long _sys_ni_syscall /* old sys_ipc */
+ .long _sys_fsync
+ .long _sys_ni_syscall /* old sys_sigreturn */
+ .long _sys_clone /* 120 */
+ .long _sys_setdomainname
+ .long _sys_newuname
+ .long _sys_ni_syscall /* old sys_modify_ldt */
+ .long _sys_adjtimex
+ .long _sys_ni_syscall /* 125 */ /* sys_mprotect */
+ .long _sys_ni_syscall /* old sys_sigprocmask */
+ .long _sys_ni_syscall /* old "creat_module" */
+ .long _sys_init_module
+ .long _sys_delete_module
+ .long _sys_ni_syscall /* 130: old "get_kernel_syms" */
+ .long _sys_quotactl
+ .long _sys_getpgid
+ .long _sys_fchdir
+ .long _sys_bdflush
+ .long _sys_ni_syscall /* 135 */ /* sys_sysfs */
+ .long _sys_personality
+ .long _sys_ni_syscall /* for afs_syscall */
+ .long _sys_setfsuid /* setfsuid16 */
+ .long _sys_setfsgid /* setfsgid16 */
+ .long _sys_llseek /* 140 */
+ .long _sys_getdents
+ .long _sys_ni_syscall /* sys_select */
+ .long _sys_flock
+ .long _sys_ni_syscall /* sys_msync */
+ .long _sys_readv /* 145 */
+ .long _sys_writev
+ .long _sys_getsid
+ .long _sys_fdatasync
+ .long _sys_sysctl
+ .long _sys_ni_syscall /* 150 */ /* sys_mlock */
+ .long _sys_ni_syscall /* sys_munlock */
+ .long _sys_ni_syscall /* sys_mlockall */
+ .long _sys_ni_syscall /* sys_munlockall */
+ .long _sys_sched_setparam
+ .long _sys_sched_getparam /* 155 */
+ .long _sys_sched_setscheduler
+ .long _sys_sched_getscheduler
+ .long _sys_sched_yield
+ .long _sys_sched_get_priority_max
+ .long _sys_sched_get_priority_min /* 160 */
+ .long _sys_sched_rr_get_interval
+ .long _sys_nanosleep
+ .long _sys_ni_syscall /* sys_mremap */
+ .long _sys_setresuid /* setresuid16 */
+ .long _sys_getresuid /* getresuid16 */ /* 165 */
+ .long _sys_ni_syscall /* for vm86 */
+ .long _sys_ni_syscall /* old "query_module" */
+ .long _sys_ni_syscall /* sys_poll */
+ .long _sys_ni_syscall /* sys_nfsservctl */
+ .long _sys_setresgid /* setresgid16 */ /* 170 */
+ .long _sys_getresgid /* getresgid16 */
+ .long _sys_prctl
+ .long _sys_rt_sigreturn
+ .long _sys_rt_sigaction
+ .long _sys_rt_sigprocmask /* 175 */
+ .long _sys_rt_sigpending
+ .long _sys_rt_sigtimedwait
+ .long _sys_rt_sigqueueinfo
+ .long _sys_rt_sigsuspend
+ .long _sys_pread64 /* 180 */
+ .long _sys_pwrite64
+ .long _sys_lchown /* lchown16 */
+ .long _sys_getcwd
+ .long _sys_capget
+ .long _sys_capset /* 185 */
+ .long _sys_sigaltstack
+ .long _sys_sendfile
+ .long _sys_ni_syscall /* streams1 */
+ .long _sys_ni_syscall /* streams2 */
+ .long _sys_vfork /* 190 */
+ .long _sys_getrlimit
+ .long _sys_mmap2
+ .long _sys_truncate64
+ .long _sys_ftruncate64
+ .long _sys_stat64 /* 195 */
+ .long _sys_lstat64
+ .long _sys_fstat64
+ .long _sys_chown
+ .long _sys_getuid
+ .long _sys_getgid /* 200 */
+ .long _sys_geteuid
+ .long _sys_getegid
+ .long _sys_setreuid
+ .long _sys_setregid
+ .long _sys_getgroups /* 205 */
+ .long _sys_setgroups
+ .long _sys_fchown
+ .long _sys_setresuid
+ .long _sys_getresuid
+ .long _sys_setresgid /* 210 */
+ .long _sys_getresgid
+ .long _sys_lchown
+ .long _sys_setuid
+ .long _sys_setgid
+ .long _sys_setfsuid /* 215 */
+ .long _sys_setfsgid
+ .long _sys_pivot_root
+ .long _sys_ni_syscall /* sys_mincore */
+ .long _sys_ni_syscall /* sys_madvise */
+ .long _sys_getdents64 /* 220 */
+ .long _sys_fcntl64
+ .long _sys_ni_syscall /* reserved for TUX */
+ .long _sys_ni_syscall
+ .long _sys_gettid
+ .long _sys_ni_syscall /* 225 */ /* sys_readahead */
+ .long _sys_setxattr
+ .long _sys_lsetxattr
+ .long _sys_fsetxattr
+ .long _sys_getxattr
+ .long _sys_lgetxattr /* 230 */
+ .long _sys_fgetxattr
+ .long _sys_listxattr
+ .long _sys_llistxattr
+ .long _sys_flistxattr
+ .long _sys_removexattr /* 235 */
+ .long _sys_lremovexattr
+ .long _sys_fremovexattr
+ .long _sys_tkill
+ .long _sys_sendfile64
+ .long _sys_futex /* 240 */
+ .long _sys_sched_setaffinity
+ .long _sys_sched_getaffinity
+ .long _sys_ni_syscall /* sys_set_thread_area */
+ .long _sys_ni_syscall /* sys_get_thread_area */
+ .long _sys_io_setup /* 245 */
+ .long _sys_io_destroy
+ .long _sys_io_getevents
+ .long _sys_io_submit
+ .long _sys_io_cancel
+ .long _sys_ni_syscall /* 250 */ /* sys_alloc_hugepages */
+ .long _sys_ni_syscall /* sys_freec_hugepages */
+ .long _sys_exit_group
+ .long _sys_lookup_dcookie
+ .long _sys_bfin_spinlock
+ .long _sys_epoll_create /* 255 */
+ .long _sys_epoll_ctl
+ .long _sys_epoll_wait
+ .long _sys_ni_syscall /* remap_file_pages */
+ .long _sys_set_tid_address
+ .long _sys_timer_create /* 260 */
+ .long _sys_timer_settime
+ .long _sys_timer_gettime
+ .long _sys_timer_getoverrun
+ .long _sys_timer_delete
+ .long _sys_clock_settime /* 265 */
+ .long _sys_clock_gettime
+ .long _sys_clock_getres
+ .long _sys_clock_nanosleep
+ .long _sys_statfs64
+ .long _sys_fstatfs64 /* 270 */
+ .long _sys_tgkill
+ .long _sys_utimes
+ .long _sys_fadvise64_64
+ .long _sys_ni_syscall /* vserver */
+ .long _sys_ni_syscall /* 275, mbind */
+ .long _sys_ni_syscall /* get_mempolicy */
+ .long _sys_ni_syscall /* set_mempolicy */
+ .long _sys_mq_open
+ .long _sys_mq_unlink
+ .long _sys_mq_timedsend /* 280 */
+ .long _sys_mq_timedreceive
+ .long _sys_mq_notify
+ .long _sys_mq_getsetattr
+ .long _sys_ni_syscall /* kexec_load */
+ .long _sys_waitid /* 285 */
+ .long _sys_add_key
+ .long _sys_request_key
+ .long _sys_keyctl
+ .long _sys_ioprio_set
+ .long _sys_ioprio_get /* 290 */
+ .long _sys_inotify_init
+ .long _sys_inotify_add_watch
+ .long _sys_inotify_rm_watch
+ .long _sys_ni_syscall /* migrate_pages */
+ .long _sys_openat /* 295 */
+ .long _sys_mkdirat
+ .long _sys_mknodat
+ .long _sys_fchownat
+ .long _sys_futimesat
+ .long _sys_fstatat64 /* 300 */
+ .long _sys_unlinkat
+ .long _sys_renameat
+ .long _sys_linkat
+ .long _sys_symlinkat
+ .long _sys_readlinkat /* 305 */
+ .long _sys_fchmodat
+ .long _sys_faccessat
+ .long _sys_pselect6
+ .long _sys_ppoll
+ .long _sys_unshare /* 310 */
+ .long _sys_sram_alloc
+ .long _sys_sram_free
+ .long _sys_dma_memcpy
+ .long _sys_accept
+ .long _sys_bind /* 315 */
+ .long _sys_connect
+ .long _sys_getpeername
+ .long _sys_getsockname
+ .long _sys_getsockopt
+ .long _sys_listen /* 320 */
+ .long _sys_recv
+ .long _sys_recvfrom
+ .long _sys_recvmsg
+ .long _sys_send
+ .long _sys_sendmsg /* 325 */
+ .long _sys_sendto
+ .long _sys_setsockopt
+ .long _sys_shutdown
+ .long _sys_socket
+ .long _sys_socketpair /* 330 */
+ .long _sys_semctl
+ .long _sys_semget
+ .long _sys_semop
+ .long _sys_msgctl
+ .long _sys_msgget /* 335 */
+ .long _sys_msgrcv
+ .long _sys_msgsnd
+ .long _sys_shmat
+ .long _sys_shmctl
+ .long _sys_shmdt /* 340 */
+ .long _sys_shmget
+ .rept NR_syscalls-(.-_sys_call_table)/4
+ .long _sys_ni_syscall
+ .endr
+_excpt_saved_imask:
+ .long 0;
+
+_exception_stack:
+ .rept 1024
+ .long 0;
+ .endr
+_exception_stack_top:
+
+#if defined(ANOMALY_05000261)
+/* Used by the assembly entry point to work around an anomaly. */
+_last_cplb_fault_retx:
+ .long 0;
+#endif
+/*
+ * Single instructions can have multiple faults, which need to be
+ * handled by traps.c, in irq5. We store the exception cause to ensure
+ * we don't miss a double fault condition
+ */
+ENTRY(_in_ptr_excause)
+ .long 0;
+ENTRY(_out_ptr_excause)
+ .long 0;
+ALIGN
+ENTRY(_excause_circ_buf)
+ .rept 4
+ .long 0
+ .endr
diff --git a/arch/blackfin/mach-common/interrupt.S b/arch/blackfin/mach-common/interrupt.S
new file mode 100644
index 0000000..dd45664
--- /dev/null
+++ b/arch/blackfin/mach-common/interrupt.S
@@ -0,0 +1,253 @@
+/*
+ * File: arch/blackfin/mach-common/interrupt.S
+ * Based on:
+ * Author: D. Jeff Dionne <jeff@ryeham.ee.ryerson.ca>
+ * Kenneth Albanowski <kjahds@kjahds.com>
+ *
+ * Created: ?
+ * Description: Interrupt Entries
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <asm/blackfin.h>
+#include <asm/mach/irq.h>
+#include <linux/autoconf.h>
+#include <linux/linkage.h>
+#include <asm/entry.h>
+#include <asm/asm-offsets.h>
+
+#include <asm/mach-common/context.S>
+
+#ifdef CONFIG_I_ENTRY_L1
+.section .l1.text
+#else
+.text
+#endif
+
+.align 4 /* just in case */
+
+/*
+ * initial interrupt handlers
+ */
+
+#ifndef CONFIG_KGDB
+ /* interrupt routine for emulation - 0 */
+ /* Currently used only if GDB stub is not in - invalid */
+ /* gdb-stub set the evt itself */
+ /* save registers for post-mortem only */
+ENTRY(_evt_emulation)
+ SAVE_ALL_SYS
+#ifdef CONFIG_FRAME_POINTER
+ fp = 0;
+#endif
+ r0 = IRQ_EMU;
+ r1 = sp;
+ SP += -12;
+ call _irq_panic;
+ SP += 12;
+ /* - GDB stub fills this in by itself (if defined) */
+ rte;
+#endif
+
+/* Common interrupt entry code. First we do CLI, then push
+ * RETI, to keep interrupts disabled, but to allow this state to be changed
+ * by local_bh_enable.
+ * R0 contains the interrupt number, while R1 may contain the value of IPEND,
+ * or garbage if IPEND won't be needed by the ISR. */
+__common_int_entry:
+ [--sp] = fp;
+ [--sp] = usp;
+
+ [--sp] = i0;
+ [--sp] = i1;
+ [--sp] = i2;
+ [--sp] = i3;
+
+ [--sp] = m0;
+ [--sp] = m1;
+ [--sp] = m2;
+ [--sp] = m3;
+
+ [--sp] = l0;
+ [--sp] = l1;
+ [--sp] = l2;
+ [--sp] = l3;
+
+ [--sp] = b0;
+ [--sp] = b1;
+ [--sp] = b2;
+ [--sp] = b3;
+ [--sp] = a0.x;
+ [--sp] = a0.w;
+ [--sp] = a1.x;
+ [--sp] = a1.w;
+
+ [--sp] = LC0;
+ [--sp] = LC1;
+ [--sp] = LT0;
+ [--sp] = LT1;
+ [--sp] = LB0;
+ [--sp] = LB1;
+
+ [--sp] = ASTAT;
+
+ [--sp] = r0; /* Skip reserved */
+ [--sp] = RETS;
+ r2 = RETI;
+ [--sp] = r2;
+ [--sp] = RETX;
+ [--sp] = RETN;
+ [--sp] = RETE;
+ [--sp] = SEQSTAT;
+ [--sp] = r1; /* IPEND - R1 may or may not be set up before jumping here. */
+
+ /* Switch to other method of keeping interrupts disabled. */
+#ifdef CONFIG_DEBUG_HWERR
+ r1 = 0x3f;
+ sti r1;
+#else
+ cli r1;
+#endif
+ [--sp] = RETI; /* orig_pc */
+ /* Clear all L registers. */
+ r1 = 0 (x);
+ l0 = r1;
+ l1 = r1;
+ l2 = r1;
+ l3 = r1;
+#ifdef CONFIG_FRAME_POINTER
+ fp = 0;
+#endif
+
+#ifdef ANOMALY_05000283
+ cc = r7 == r7;
+ p5.h = 0xffc0;
+ p5.l = 0x0014;
+ if cc jump 1f;
+ r7.l = W[p5];
+1:
+#endif
+ r1 = sp;
+ SP += -12;
+ call _do_irq;
+ SP += 12;
+ call _return_from_int;
+.Lcommon_restore_context:
+ RESTORE_CONTEXT
+ rti;
+
+/* interrupt routine for ivhw - 5 */
+ENTRY(_evt_ivhw)
+ SAVE_CONTEXT
+#ifdef CONFIG_FRAME_POINTER
+ fp = 0;
+#endif
+#ifdef ANOMALY_05000283
+ cc = r7 == r7;
+ p5.h = 0xffc0;
+ p5.l = 0x0014;
+ if cc jump 1f;
+ r7.l = W[p5];
+1:
+#endif
+ p0.l = lo(TBUFCTL);
+ p0.h = hi(TBUFCTL);
+ r0 = 1;
+ [p0] = r0;
+ r0 = IRQ_HWERR;
+ r1 = sp;
+
+#ifdef CONFIG_HARDWARE_PM
+ r7 = SEQSTAT;
+ r7 = r7 >>> 0xe;
+ r6 = 0x1F;
+ r7 = r7 & r6;
+ r5 = 0x12;
+ cc = r7 == r5;
+ if cc jump .Lcall_do_ovf; /* deal with performance counter overflow */
+#endif
+
+ SP += -12;
+ call _irq_panic;
+ SP += 12;
+ rti;
+#ifdef CONFIG_HARDWARE_PM
+.Lcall_do_ovf:
+
+ SP += -12;
+ call _pm_overflow;
+ SP += 12;
+
+ jump .Lcommon_restore_context;
+#endif
+
+/* interrupt routine for evt2 - 2. This is NMI. */
+ENTRY(_evt_evt2)
+ SAVE_CONTEXT
+#ifdef CONFIG_FRAME_POINTER
+ fp = 0;
+#endif
+#ifdef ANOMALY_05000283
+ cc = r7 == r7;
+ p5.h = 0xffc0;
+ p5.l = 0x0014;
+ if cc jump 1f;
+ r7.l = W[p5];
+1:
+#endif
+ r0 = IRQ_NMI;
+ r1 = sp;
+ SP += -12;
+ call _asm_do_IRQ;
+ SP += 12;
+ RESTORE_CONTEXT
+ rtn;
+
+/* interrupt routine for core timer - 6 */
+ENTRY(_evt_timer)
+ TIMER_INTERRUPT_ENTRY(EVT_IVTMR_P)
+
+/* interrupt routine for evt7 - 7 */
+ENTRY(_evt_evt7)
+ INTERRUPT_ENTRY(EVT_IVG7_P)
+ENTRY(_evt_evt8)
+ INTERRUPT_ENTRY(EVT_IVG8_P)
+ENTRY(_evt_evt9)
+ INTERRUPT_ENTRY(EVT_IVG9_P)
+ENTRY(_evt_evt10)
+ INTERRUPT_ENTRY(EVT_IVG10_P)
+ENTRY(_evt_evt11)
+ INTERRUPT_ENTRY(EVT_IVG11_P)
+ENTRY(_evt_evt12)
+ INTERRUPT_ENTRY(EVT_IVG12_P)
+ENTRY(_evt_evt13)
+ INTERRUPT_ENTRY(EVT_IVG13_P)
+
+
+ /* interrupt routine for system_call - 15 */
+ENTRY(_evt_system_call)
+ SAVE_CONTEXT_SYSCALL
+#ifdef CONFIG_FRAME_POINTER
+ fp = 0;
+#endif
+ call _system_call;
+ jump .Lcommon_restore_context;
diff --git a/arch/blackfin/mach-common/ints-priority-dc.c b/arch/blackfin/mach-common/ints-priority-dc.c
new file mode 100644
index 0000000..f3cf070
--- /dev/null
+++ b/arch/blackfin/mach-common/ints-priority-dc.c
@@ -0,0 +1,476 @@
+/*
+ * File: arch/blackfin/mach-common/ints-priority-dc.c
+ * Based on:
+ * Author:
+ *
+ * Created: ?
+ * Description: Set up the interupt priorities
+ *
+ * Modified:
+ * 1996 Roman Zippel
+ * 1999 D. Jeff Dionne <jeff@uclinux.org>
+ * 2000-2001 Lineo, Inc. D. Jefff Dionne <jeff@lineo.ca>
+ * 2002 Arcturus Networks Inc. MaTed <mated@sympatico.ca>
+ * 2003 Metrowerks/Motorola
+ * 2003 Bas Vermeulen <bas@buyways.nl>
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/module.h>
+#include <linux/kernel_stat.h>
+#include <linux/seq_file.h>
+#include <linux/irq.h>
+#ifdef CONFIG_KGDB
+#include <linux/kgdb.h>
+#endif
+#include <asm/traps.h>
+#include <asm/blackfin.h>
+#include <asm/gpio.h>
+#include <asm/irq_handler.h>
+
+/*
+ * NOTES:
+ * - we have separated the physical Hardware interrupt from the
+ * levels that the LINUX kernel sees (see the description in irq.h)
+ * -
+ */
+
+unsigned long irq_flags = 0;
+
+/* The number of spurious interrupts */
+atomic_t num_spurious;
+
+struct ivgx {
+ /* irq number for request_irq, available in mach-bf561/irq.h */
+ int irqno;
+ /* corresponding bit in the SICA_ISR0 register */
+ int isrflag0;
+ /* corresponding bit in the SICA_ISR1 register */
+ int isrflag1;
+} ivg_table[NR_PERI_INTS];
+
+struct ivg_slice {
+ /* position of first irq in ivg_table for given ivg */
+ struct ivgx *ifirst;
+ struct ivgx *istop;
+} ivg7_13[IVG13 - IVG7 + 1];
+
+static void search_IAR(void);
+
+/*
+ * Search SIC_IAR and fill tables with the irqvalues
+ * and their positions in the SIC_ISR register.
+ */
+static void __init search_IAR(void)
+{
+ unsigned ivg, irq_pos = 0;
+ for (ivg = 0; ivg <= IVG13 - IVG7; ivg++) {
+ int irqn;
+
+ ivg7_13[ivg].istop = ivg7_13[ivg].ifirst = &ivg_table[irq_pos];
+
+ for (irqn = 0; irqn < NR_PERI_INTS; irqn++) {
+ int iar_shift = (irqn & 7) * 4;
+ if (ivg ==
+ (0xf &
+ bfin_read32((unsigned long *)SICA_IAR0 +
+ (irqn >> 3)) >> iar_shift)) {
+ ivg_table[irq_pos].irqno = IVG7 + irqn;
+ ivg_table[irq_pos].isrflag0 =
+ (irqn < 32 ? (1 << irqn) : 0);
+ ivg_table[irq_pos].isrflag1 =
+ (irqn < 32 ? 0 : (1 << (irqn - 32)));
+ ivg7_13[ivg].istop++;
+ irq_pos++;
+ }
+ }
+ }
+}
+
+/*
+ * This is for BF561 internal IRQs
+ */
+
+static void ack_noop(unsigned int irq)
+{
+ /* Dummy function. */
+}
+
+static void bf561_core_mask_irq(unsigned int irq)
+{
+ irq_flags &= ~(1 << irq);
+ if (!irqs_disabled())
+ local_irq_enable();
+}
+
+static void bf561_core_unmask_irq(unsigned int irq)
+{
+ irq_flags |= 1 << irq;
+ /*
+ * If interrupts are enabled, IMASK must contain the same value
+ * as irq_flags. Make sure that invariant holds. If interrupts
+ * are currently disabled we need not do anything; one of the
+ * callers will take care of setting IMASK to the proper value
+ * when reenabling interrupts.
+ * local_irq_enable just does "STI irq_flags", so it's exactly
+ * what we need.
+ */
+ if (!irqs_disabled())
+ local_irq_enable();
+ return;
+}
+
+static void bf561_internal_mask_irq(unsigned int irq)
+{
+ unsigned long irq_mask;
+ if ((irq - (IRQ_CORETMR + 1)) < 32) {
+ irq_mask = (1 << (irq - (IRQ_CORETMR + 1)));
+ bfin_write_SICA_IMASK0(bfin_read_SICA_IMASK0() & ~irq_mask);
+ } else {
+ irq_mask = (1 << (irq - (IRQ_CORETMR + 1) - 32));
+ bfin_write_SICA_IMASK1(bfin_read_SICA_IMASK1() & ~irq_mask);
+ }
+}
+
+static void bf561_internal_unmask_irq(unsigned int irq)
+{
+ unsigned long irq_mask;
+
+ if ((irq - (IRQ_CORETMR + 1)) < 32) {
+ irq_mask = (1 << (irq - (IRQ_CORETMR + 1)));
+ bfin_write_SICA_IMASK0(bfin_read_SICA_IMASK0() | irq_mask);
+ } else {
+ irq_mask = (1 << (irq - (IRQ_CORETMR + 1) - 32));
+ bfin_write_SICA_IMASK1(bfin_read_SICA_IMASK1() | irq_mask);
+ }
+ SSYNC();
+}
+
+static struct irq_chip bf561_core_irqchip = {
+ .ack = ack_noop,
+ .mask = bf561_core_mask_irq,
+ .unmask = bf561_core_unmask_irq,
+};
+
+static struct irq_chip bf561_internal_irqchip = {
+ .ack = ack_noop,
+ .mask = bf561_internal_mask_irq,
+ .unmask = bf561_internal_unmask_irq,
+};
+
+#ifdef CONFIG_IRQCHIP_DEMUX_GPIO
+static unsigned short gpio_enabled[gpio_bank(MAX_BLACKFIN_GPIOS)];
+static unsigned short gpio_edge_triggered[gpio_bank(MAX_BLACKFIN_GPIOS)];
+
+static void bf561_gpio_ack_irq(unsigned int irq)
+{
+ u16 gpionr = irq - IRQ_PF0;
+
+ if(gpio_edge_triggered[gpio_bank(gpionr)] & gpio_bit(gpionr)) {
+ set_gpio_data(gpionr, 0);
+ SSYNC();
+ }
+}
+
+static void bf561_gpio_mask_ack_irq(unsigned int irq)
+{
+ u16 gpionr = irq - IRQ_PF0;
+
+ if(gpio_edge_triggered[gpio_bank(gpionr)] & gpio_bit(gpionr)) {
+ set_gpio_data(gpionr, 0);
+ SSYNC();
+ }
+
+ set_gpio_maska(gpionr, 0);
+ SSYNC();
+}
+
+static void bf561_gpio_mask_irq(unsigned int irq)
+{
+ set_gpio_maska(irq - IRQ_PF0, 0);
+ SSYNC();
+}
+
+static void bf561_gpio_unmask_irq(unsigned int irq)
+{
+ set_gpio_maska(irq - IRQ_PF0, 1);
+ SSYNC();
+}
+
+static unsigned int bf561_gpio_irq_startup(unsigned int irq)
+{
+ unsigned int ret;
+ u16 gpionr = irq - IRQ_PF0;
+
+ if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) {
+
+ ret = gpio_request(gpionr, NULL);
+ if(ret)
+ return ret;
+
+ }
+
+ gpio_enabled[gpio_bank(gpionr)] |= gpio_bit(gpionr);
+ bf561_gpio_unmask_irq(irq);
+
+ return ret;
+
+}
+
+static void bf561_gpio_irq_shutdown(unsigned int irq)
+{
+ bf561_gpio_mask_irq(irq);
+ gpio_free(irq - IRQ_PF0);
+ gpio_enabled[gpio_bank(irq - IRQ_PF0)] &= ~gpio_bit(irq - IRQ_PF0);
+}
+
+static int bf561_gpio_irq_type(unsigned int irq, unsigned int type)
+{
+
+ unsigned int ret;
+ u16 gpionr = irq - IRQ_PF0;
+
+
+ if (type == IRQ_TYPE_PROBE) {
+ /* only probe unenabled GPIO interrupt lines */
+ if (gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))
+ return 0;
+ type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
+
+ }
+
+ if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING |
+ IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) {
+
+ if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) {
+
+ ret = gpio_request(gpionr, NULL);
+ if(ret)
+ return ret;
+
+ }
+
+ gpio_enabled[gpio_bank(gpionr)] |= gpio_bit(gpionr);
+ } else {
+ gpio_enabled[gpio_bank(gpionr)] &= ~gpio_bit(gpionr);
+ return 0;
+ }
+
+
+ set_gpio_dir(gpionr, 0);
+ set_gpio_inen(gpionr, 1);
+
+
+ if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) {
+ gpio_edge_triggered[gpio_bank(gpionr)] |= gpio_bit(gpionr);
+ set_gpio_edge(gpionr, 1);
+ } else {
+ set_gpio_edge(gpionr, 0);
+ gpio_edge_triggered[gpio_bank(gpionr)] &= ~gpio_bit(gpionr);
+ }
+
+ if ((type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING))
+ == (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING))
+ set_gpio_both(gpionr, 1);
+ else
+ set_gpio_both(gpionr, 0);
+
+ if ((type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_LEVEL_LOW)))
+ set_gpio_polar(gpionr, 1); /* low or falling edge denoted by one */
+ else
+ set_gpio_polar(gpionr, 0); /* high or rising edge denoted by zero */
+
+ SSYNC();
+
+ if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING))
+ set_irq_handler(irq, handle_edge_irq);
+ else
+ set_irq_handler(irq, handle_level_irq);
+
+ return 0;
+}
+
+static struct irq_chip bf561_gpio_irqchip = {
+ .ack = bf561_gpio_ack_irq,
+ .mask = bf561_gpio_mask_irq,
+ .mask_ack = bf561_gpio_mask_ack_irq,
+ .unmask = bf561_gpio_unmask_irq,
+ .set_type = bf561_gpio_irq_type,
+ .startup = bf561_gpio_irq_startup,
+ .shutdown = bf561_gpio_irq_shutdown
+};
+
+static void bf561_demux_gpio_irq(unsigned int inta_irq,
+ struct irq_desc *intb_desc)
+{
+ int irq, flag_d, mask;
+ u16 gpio;
+
+ switch (inta_irq) {
+ case IRQ_PROG0_INTA:
+ irq = IRQ_PF0;
+ break;
+ case IRQ_PROG1_INTA:
+ irq = IRQ_PF16;
+ break;
+ case IRQ_PROG2_INTA:
+ irq = IRQ_PF32;
+ break;
+ default:
+ dump_stack();
+ return;
+ }
+
+ gpio = irq - IRQ_PF0;
+
+ flag_d = get_gpiop_data(gpio);
+ mask = flag_d & (gpio_enabled[gpio_bank(gpio)] &
+ get_gpiop_maska(gpio));
+
+ do {
+ if (mask & 1) {
+ struct irq_desc *desc = irq_desc + irq;
+ desc->handle_irq(irq, desc);
+ }
+ irq++;
+ mask >>= 1;
+ } while (mask);
+
+
+}
+
+#endif /* CONFIG_IRQCHIP_DEMUX_GPIO */
+
+/*
+ * This function should be called during kernel startup to initialize
+ * the BFin IRQ handling routines.
+ */
+int __init init_arch_irq(void)
+{
+ int irq;
+ unsigned long ilat = 0;
+ /* Disable all the peripheral intrs - page 4-29 HW Ref manual */
+ bfin_write_SICA_IMASK0(SIC_UNMASK_ALL);
+ bfin_write_SICA_IMASK1(SIC_UNMASK_ALL);
+ SSYNC();
+
+ local_irq_disable();
+
+ init_exception_buff();
+
+#ifndef CONFIG_KGDB
+ bfin_write_EVT0(evt_emulation);
+#endif
+ bfin_write_EVT2(evt_evt2);
+ bfin_write_EVT3(trap);
+ bfin_write_EVT5(evt_ivhw);
+ bfin_write_EVT6(evt_timer);
+ bfin_write_EVT7(evt_evt7);
+ bfin_write_EVT8(evt_evt8);
+ bfin_write_EVT9(evt_evt9);
+ bfin_write_EVT10(evt_evt10);
+ bfin_write_EVT11(evt_evt11);
+ bfin_write_EVT12(evt_evt12);
+ bfin_write_EVT13(evt_evt13);
+ bfin_write_EVT14(evt14_softirq);
+ bfin_write_EVT15(evt_system_call);
+ CSYNC();
+
+ for (irq = 0; irq < SYS_IRQS; irq++) {
+ if (irq <= IRQ_CORETMR)
+ set_irq_chip(irq, &bf561_core_irqchip);
+ else
+ set_irq_chip(irq, &bf561_internal_irqchip);
+#ifdef CONFIG_IRQCHIP_DEMUX_GPIO
+ if ((irq != IRQ_PROG0_INTA) &&
+ (irq != IRQ_PROG1_INTA) && (irq != IRQ_PROG2_INTA)) {
+#endif
+ set_irq_handler(irq, handle_simple_irq);
+#ifdef CONFIG_IRQCHIP_DEMUX_GPIO
+ } else {
+ set_irq_chained_handler(irq, bf561_demux_gpio_irq);
+ }
+#endif
+
+ }
+
+#ifdef CONFIG_IRQCHIP_DEMUX_GPIO
+ for (irq = IRQ_PF0; irq <= IRQ_PF47; irq++) {
+ set_irq_chip(irq, &bf561_gpio_irqchip);
+ /* if configured as edge, then will be changed to do_edge_IRQ */
+ set_irq_handler(irq, handle_level_irq);
+ }
+#endif
+ bfin_write_IMASK(0);
+ CSYNC();
+ ilat = bfin_read_ILAT();
+ CSYNC();
+ bfin_write_ILAT(ilat);
+ CSYNC();
+
+ printk(KERN_INFO "Configuring Blackfin Priority Driven Interrupts\n");
+ /* IMASK=xxx is equivalent to STI xx or irq_flags=xx,
+ * local_irq_enable()
+ */
+ program_IAR();
+ /* Therefore it's better to setup IARs before interrupts enabled */
+ search_IAR();
+
+ /* Enable interrupts IVG7-15 */
+ irq_flags = irq_flags | IMASK_IVG15 |
+ IMASK_IVG14 | IMASK_IVG13 | IMASK_IVG12 | IMASK_IVG11 |
+ IMASK_IVG10 | IMASK_IVG9 | IMASK_IVG8 | IMASK_IVG7 | IMASK_IVGHW;
+
+ return 0;
+}
+
+#ifdef CONFIG_DO_IRQ_L1
+void do_irq(int vec, struct pt_regs *fp)__attribute__((l1_text));
+#endif
+
+void do_irq(int vec, struct pt_regs *fp)
+{
+ if (vec == EVT_IVTMR_P) {
+ vec = IRQ_CORETMR;
+ } else {
+ struct ivgx *ivg = ivg7_13[vec - IVG7].ifirst;
+ struct ivgx *ivg_stop = ivg7_13[vec - IVG7].istop;
+ unsigned long sic_status0, sic_status1;
+
+ SSYNC();
+ sic_status0 = bfin_read_SICA_IMASK0() & bfin_read_SICA_ISR0();
+ sic_status1 = bfin_read_SICA_IMASK1() & bfin_read_SICA_ISR1();
+
+ for (;; ivg++) {
+ if (ivg >= ivg_stop) {
+ atomic_inc(&num_spurious);
+ return;
+ } else if ((sic_status0 & ivg->isrflag0) ||
+ (sic_status1 & ivg->isrflag1))
+ break;
+ }
+ vec = ivg->irqno;
+ }
+ asm_do_IRQ(vec, fp);
+
+#ifdef CONFIG_KGDB
+ kgdb_process_breakpoint();
+#endif
+}
diff --git a/arch/blackfin/mach-common/ints-priority-sc.c b/arch/blackfin/mach-common/ints-priority-sc.c
new file mode 100644
index 0000000..34b6228
--- /dev/null
+++ b/arch/blackfin/mach-common/ints-priority-sc.c
@@ -0,0 +1,577 @@
+/*
+ * File: arch/blackfin/mach-common/ints-priority-sc.c
+ * Based on:
+ * Author:
+ *
+ * Created: ?
+ * Description: Set up the interupt priorities
+ *
+ * Modified:
+ * 1996 Roman Zippel
+ * 1999 D. Jeff Dionne <jeff@uclinux.org>
+ * 2000-2001 Lineo, Inc. D. Jefff Dionne <jeff@lineo.ca>
+ * 2002 Arcturus Networks Inc. MaTed <mated@sympatico.ca>
+ * 2003 Metrowerks/Motorola
+ * 2003 Bas Vermeulen <bas@buyways.nl>
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/module.h>
+#include <linux/kernel_stat.h>
+#include <linux/seq_file.h>
+#include <linux/irq.h>
+#ifdef CONFIG_KGDB
+#include <linux/kgdb.h>
+#endif
+#include <asm/traps.h>
+#include <asm/blackfin.h>
+#include <asm/gpio.h>
+#include <asm/irq_handler.h>
+
+#ifdef BF537_FAMILY
+# define BF537_GENERIC_ERROR_INT_DEMUX
+#else
+# undef BF537_GENERIC_ERROR_INT_DEMUX
+#endif
+
+/*
+ * NOTES:
+ * - we have separated the physical Hardware interrupt from the
+ * levels that the LINUX kernel sees (see the description in irq.h)
+ * -
+ */
+
+unsigned long irq_flags = 0;
+
+/* The number of spurious interrupts */
+atomic_t num_spurious;
+
+struct ivgx {
+ /* irq number for request_irq, available in mach-bf533/irq.h */
+ int irqno;
+ /* corresponding bit in the SIC_ISR register */
+ int isrflag;
+} ivg_table[NR_PERI_INTS];
+
+struct ivg_slice {
+ /* position of first irq in ivg_table for given ivg */
+ struct ivgx *ifirst;
+ struct ivgx *istop;
+} ivg7_13[IVG13 - IVG7 + 1];
+
+static void search_IAR(void);
+
+/*
+ * Search SIC_IAR and fill tables with the irqvalues
+ * and their positions in the SIC_ISR register.
+ */
+static void __init search_IAR(void)
+{
+ unsigned ivg, irq_pos = 0;
+ for (ivg = 0; ivg <= IVG13 - IVG7; ivg++) {
+ int irqn;
+
+ ivg7_13[ivg].istop = ivg7_13[ivg].ifirst =
+ &ivg_table[irq_pos];
+
+ for (irqn = 0; irqn < NR_PERI_INTS; irqn++) {
+ int iar_shift = (irqn & 7) * 4;
+ if (ivg ==
+ (0xf &
+ bfin_read32((unsigned long *) SIC_IAR0 +
+ (irqn >> 3)) >> iar_shift)) {
+ ivg_table[irq_pos].irqno = IVG7 + irqn;
+ ivg_table[irq_pos].isrflag = 1 << irqn;
+ ivg7_13[ivg].istop++;
+ irq_pos++;
+ }
+ }
+ }
+}
+
+/*
+ * This is for BF533 internal IRQs
+ */
+
+static void ack_noop(unsigned int irq)
+{
+ /* Dummy function. */
+}
+
+static void bfin_core_mask_irq(unsigned int irq)
+{
+ irq_flags &= ~(1 << irq);
+ if (!irqs_disabled())
+ local_irq_enable();
+}
+
+static void bfin_core_unmask_irq(unsigned int irq)
+{
+ irq_flags |= 1 << irq;
+ /*
+ * If interrupts are enabled, IMASK must contain the same value
+ * as irq_flags. Make sure that invariant holds. If interrupts
+ * are currently disabled we need not do anything; one of the
+ * callers will take care of setting IMASK to the proper value
+ * when reenabling interrupts.
+ * local_irq_enable just does "STI irq_flags", so it's exactly
+ * what we need.
+ */
+ if (!irqs_disabled())
+ local_irq_enable();
+ return;
+}
+
+static void bfin_internal_mask_irq(unsigned int irq)
+{
+ bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() &
+ ~(1 << (irq - (IRQ_CORETMR + 1))));
+ SSYNC();
+}
+
+static void bfin_internal_unmask_irq(unsigned int irq)
+{
+ bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() |
+ (1 << (irq - (IRQ_CORETMR + 1))));
+ SSYNC();
+}
+
+static struct irq_chip bfin_core_irqchip = {
+ .ack = ack_noop,
+ .mask = bfin_core_mask_irq,
+ .unmask = bfin_core_unmask_irq,
+};
+
+static struct irq_chip bfin_internal_irqchip = {
+ .ack = ack_noop,
+ .mask = bfin_internal_mask_irq,
+ .unmask = bfin_internal_unmask_irq,
+};
+
+#ifdef BF537_GENERIC_ERROR_INT_DEMUX
+static int error_int_mask;
+
+static void bfin_generic_error_ack_irq(unsigned int irq)
+{
+
+}
+
+static void bfin_generic_error_mask_irq(unsigned int irq)
+{
+ error_int_mask &= ~(1L << (irq - IRQ_PPI_ERROR));
+
+ if (!error_int_mask) {
+ local_irq_disable();
+ bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() &
+ ~(1 <<
+ (IRQ_GENERIC_ERROR -
+ (IRQ_CORETMR + 1))));
+ SSYNC();
+ local_irq_enable();
+ }
+}
+
+static void bfin_generic_error_unmask_irq(unsigned int irq)
+{
+ local_irq_disable();
+ bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() | 1 <<
+ (IRQ_GENERIC_ERROR - (IRQ_CORETMR + 1)));
+ SSYNC();
+ local_irq_enable();
+
+ error_int_mask |= 1L << (irq - IRQ_PPI_ERROR);
+}
+
+static struct irq_chip bfin_generic_error_irqchip = {
+ .ack = bfin_generic_error_ack_irq,
+ .mask = bfin_generic_error_mask_irq,
+ .unmask = bfin_generic_error_unmask_irq,
+};
+
+static void bfin_demux_error_irq(unsigned int int_err_irq,
+ struct irq_desc *intb_desc)
+{
+ int irq = 0;
+
+ SSYNC();
+
+#if (defined(CONFIG_BF537) || defined(CONFIG_BF536))
+ if (bfin_read_EMAC_SYSTAT() & EMAC_ERR_MASK)
+ irq = IRQ_MAC_ERROR;
+ else
+#endif
+ if (bfin_read_SPORT0_STAT() & SPORT_ERR_MASK)
+ irq = IRQ_SPORT0_ERROR;
+ else if (bfin_read_SPORT1_STAT() & SPORT_ERR_MASK)
+ irq = IRQ_SPORT1_ERROR;
+ else if (bfin_read_PPI_STATUS() & PPI_ERR_MASK)
+ irq = IRQ_PPI_ERROR;
+ else if (bfin_read_CAN_GIF() & CAN_ERR_MASK)
+ irq = IRQ_CAN_ERROR;
+ else if (bfin_read_SPI_STAT() & SPI_ERR_MASK)
+ irq = IRQ_SPI_ERROR;
+ else if ((bfin_read_UART0_IIR() & UART_ERR_MASK_STAT1) &&
+ (bfin_read_UART0_IIR() & UART_ERR_MASK_STAT0))
+ irq = IRQ_UART0_ERROR;
+ else if ((bfin_read_UART1_IIR() & UART_ERR_MASK_STAT1) &&
+ (bfin_read_UART1_IIR() & UART_ERR_MASK_STAT0))
+ irq = IRQ_UART1_ERROR;
+
+ if (irq) {
+ if (error_int_mask & (1L << (irq - IRQ_PPI_ERROR))) {
+ struct irq_desc *desc = irq_desc + irq;
+ desc->handle_irq(irq, desc);
+ } else {
+
+ switch (irq) {
+ case IRQ_PPI_ERROR:
+ bfin_write_PPI_STATUS(PPI_ERR_MASK);
+ break;
+#if (defined(CONFIG_BF537) || defined(CONFIG_BF536))
+ case IRQ_MAC_ERROR:
+ bfin_write_EMAC_SYSTAT(EMAC_ERR_MASK);
+ break;
+#endif
+ case IRQ_SPORT0_ERROR:
+ bfin_write_SPORT0_STAT(SPORT_ERR_MASK);
+ break;
+
+ case IRQ_SPORT1_ERROR:
+ bfin_write_SPORT1_STAT(SPORT_ERR_MASK);
+ break;
+
+ case IRQ_CAN_ERROR:
+ bfin_write_CAN_GIS(CAN_ERR_MASK);
+ break;
+
+ case IRQ_SPI_ERROR:
+ bfin_write_SPI_STAT(SPI_ERR_MASK);
+ break;
+
+ default:
+ break;
+ }
+
+ pr_debug("IRQ %d:"
+ " MASKED PERIPHERAL ERROR INTERRUPT ASSERTED\n",
+ irq);
+ }
+ } else
+ printk(KERN_ERR
+ "%s : %s : LINE %d :\nIRQ ?: PERIPHERAL ERROR"
+ " INTERRUPT ASSERTED BUT NO SOURCE FOUND\n",
+ __FUNCTION__, __FILE__, __LINE__);
+
+
+}
+#endif /* BF537_GENERIC_ERROR_INT_DEMUX */
+
+#ifdef CONFIG_IRQCHIP_DEMUX_GPIO
+
+static unsigned short gpio_enabled[gpio_bank(MAX_BLACKFIN_GPIOS)];
+static unsigned short gpio_edge_triggered[gpio_bank(MAX_BLACKFIN_GPIOS)];
+
+static void bfin_gpio_ack_irq(unsigned int irq)
+{
+ u16 gpionr = irq - IRQ_PF0;
+
+ if (gpio_edge_triggered[gpio_bank(gpionr)] & gpio_bit(gpionr)) {
+ set_gpio_data(gpionr, 0);
+ SSYNC();
+ }
+}
+
+static void bfin_gpio_mask_ack_irq(unsigned int irq)
+{
+ u16 gpionr = irq - IRQ_PF0;
+
+ if (gpio_edge_triggered[gpio_bank(gpionr)] & gpio_bit(gpionr)) {
+ set_gpio_data(gpionr, 0);
+ SSYNC();
+ }
+
+ set_gpio_maska(gpionr, 0);
+ SSYNC();
+}
+
+static void bfin_gpio_mask_irq(unsigned int irq)
+{
+ set_gpio_maska(irq - IRQ_PF0, 0);
+ SSYNC();
+}
+
+static void bfin_gpio_unmask_irq(unsigned int irq)
+{
+ set_gpio_maska(irq - IRQ_PF0, 1);
+ SSYNC();
+}
+
+static unsigned int bfin_gpio_irq_startup(unsigned int irq)
+{
+ unsigned int ret;
+ u16 gpionr = irq - IRQ_PF0;
+
+ if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) {
+ ret = gpio_request(gpionr, NULL);
+ if (ret)
+ return ret;
+ }
+
+ gpio_enabled[gpio_bank(gpionr)] |= gpio_bit(gpionr);
+ bfin_gpio_unmask_irq(irq);
+
+ return ret;
+}
+
+static void bfin_gpio_irq_shutdown(unsigned int irq)
+{
+ bfin_gpio_mask_irq(irq);
+ gpio_free(irq - IRQ_PF0);
+ gpio_enabled[gpio_bank(irq - IRQ_PF0)] &= ~gpio_bit(irq - IRQ_PF0);
+}
+
+static int bfin_gpio_irq_type(unsigned int irq, unsigned int type)
+{
+
+ unsigned int ret;
+ u16 gpionr = irq - IRQ_PF0;
+
+ if (type == IRQ_TYPE_PROBE) {
+ /* only probe unenabled GPIO interrupt lines */
+ if (gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))
+ return 0;
+ type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
+ }
+
+ if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING |
+ IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW))
+ {
+ if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) {
+ ret = gpio_request(gpionr, NULL);
+ if (ret)
+ return ret;
+ }
+
+ gpio_enabled[gpio_bank(gpionr)] |= gpio_bit(gpionr);
+ } else {
+ gpio_enabled[gpio_bank(gpionr)] &= ~gpio_bit(gpionr);
+ return 0;
+ }
+
+ set_gpio_dir(gpionr, 0);
+ set_gpio_inen(gpionr, 1);
+
+ if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) {
+ gpio_edge_triggered[gpio_bank(gpionr)] |= gpio_bit(gpionr);
+ set_gpio_edge(gpionr, 1);
+ } else {
+ set_gpio_edge(gpionr, 0);
+ gpio_edge_triggered[gpio_bank(gpionr)] &= ~gpio_bit(gpionr);
+ }
+
+ if ((type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING))
+ == (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING))
+ set_gpio_both(gpionr, 1);
+ else
+ set_gpio_both(gpionr, 0);
+
+ if ((type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_LEVEL_LOW)))
+ set_gpio_polar(gpionr, 1); /* low or falling edge denoted by one */
+ else
+ set_gpio_polar(gpionr, 0); /* high or rising edge denoted by zero */
+
+ SSYNC();
+
+ if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING))
+ set_irq_handler(irq, handle_edge_irq);
+ else
+ set_irq_handler(irq, handle_level_irq);
+
+ return 0;
+}
+
+
+static struct irq_chip bfin_gpio_irqchip = {
+ .ack = bfin_gpio_ack_irq,
+ .mask = bfin_gpio_mask_irq,
+ .mask_ack = bfin_gpio_mask_ack_irq,
+ .unmask = bfin_gpio_unmask_irq,
+ .set_type = bfin_gpio_irq_type,
+ .startup = bfin_gpio_irq_startup,
+ .shutdown = bfin_gpio_irq_shutdown
+};
+
+static void bfin_demux_gpio_irq(unsigned int intb_irq,
+ struct irq_desc *intb_desc)
+{
+ u16 i;
+
+ for (i = 0; i < MAX_BLACKFIN_GPIOS; i+=16) {
+ int irq = IRQ_PF0 + i;
+ int flag_d = get_gpiop_data(i);
+ int mask =
+ flag_d & (gpio_enabled[gpio_bank(i)] &
+ get_gpiop_maska(i));
+
+ while (mask) {
+ if (mask & 1) {
+ struct irq_desc *desc = irq_desc + irq;
+ desc->handle_irq(irq, desc);
+ }
+ irq++;
+ mask >>= 1;
+ }
+ }
+}
+
+#endif /* CONFIG_IRQCHIP_DEMUX_GPIO */
+
+/*
+ * This function should be called during kernel startup to initialize
+ * the BFin IRQ handling routines.
+ */
+int __init init_arch_irq(void)
+{
+ int irq;
+ unsigned long ilat = 0;
+ /* Disable all the peripheral intrs - page 4-29 HW Ref manual */
+ bfin_write_SIC_IMASK(SIC_UNMASK_ALL);
+ SSYNC();
+
+ local_irq_disable();
+
+#ifndef CONFIG_KGDB
+ bfin_write_EVT0(evt_emulation);
+#endif
+ bfin_write_EVT2(evt_evt2);
+ bfin_write_EVT3(trap);
+ bfin_write_EVT5(evt_ivhw);
+ bfin_write_EVT6(evt_timer);
+ bfin_write_EVT7(evt_evt7);
+ bfin_write_EVT8(evt_evt8);
+ bfin_write_EVT9(evt_evt9);
+ bfin_write_EVT10(evt_evt10);
+ bfin_write_EVT11(evt_evt11);
+ bfin_write_EVT12(evt_evt12);
+ bfin_write_EVT13(evt_evt13);
+ bfin_write_EVT14(evt14_softirq);
+ bfin_write_EVT15(evt_system_call);
+ CSYNC();
+
+ for (irq = 0; irq < SYS_IRQS; irq++) {
+ if (irq <= IRQ_CORETMR)
+ set_irq_chip(irq, &bfin_core_irqchip);
+ else
+ set_irq_chip(irq, &bfin_internal_irqchip);
+#ifdef BF537_GENERIC_ERROR_INT_DEMUX
+ if (irq != IRQ_GENERIC_ERROR) {
+#endif
+
+#ifdef CONFIG_IRQCHIP_DEMUX_GPIO
+ if ((irq != IRQ_PROG_INTA) /*PORT F & G MASK_A Interrupt*/
+# if defined(BF537_FAMILY) && !(defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE))
+ && (irq != IRQ_MAC_RX) /*PORT H MASK_A Interrupt*/
+# endif
+ ) {
+#endif
+ set_irq_handler(irq, handle_simple_irq);
+#ifdef CONFIG_IRQCHIP_DEMUX_GPIO
+ } else {
+ set_irq_chained_handler(irq,
+ bfin_demux_gpio_irq);
+ }
+#endif
+
+#ifdef BF537_GENERIC_ERROR_INT_DEMUX
+ } else {
+ set_irq_handler(irq, bfin_demux_error_irq);
+ }
+#endif
+ }
+#ifdef BF537_GENERIC_ERROR_INT_DEMUX
+ for (irq = IRQ_PPI_ERROR; irq <= IRQ_UART1_ERROR; irq++) {
+ set_irq_chip(irq, &bfin_generic_error_irqchip);
+ set_irq_handler(irq, handle_level_irq);
+ }
+#endif
+
+#ifdef CONFIG_IRQCHIP_DEMUX_GPIO
+ for (irq = IRQ_PF0; irq < NR_IRQS; irq++) {
+ set_irq_chip(irq, &bfin_gpio_irqchip);
+ /* if configured as edge, then will be changed to do_edge_IRQ */
+ set_irq_handler(irq, handle_level_irq);
+ }
+#endif
+ bfin_write_IMASK(0);
+ CSYNC();
+ ilat = bfin_read_ILAT();
+ CSYNC();
+ bfin_write_ILAT(ilat);
+ CSYNC();
+
+ printk(KERN_INFO
+ "Configuring Blackfin Priority Driven Interrupts\n");
+ /* IMASK=xxx is equivalent to STI xx or irq_flags=xx,
+ * local_irq_enable()
+ */
+ program_IAR();
+ /* Therefore it's better to setup IARs before interrupts enabled */
+ search_IAR();
+
+ /* Enable interrupts IVG7-15 */
+ irq_flags = irq_flags | IMASK_IVG15 |
+ IMASK_IVG14 | IMASK_IVG13 | IMASK_IVG12 | IMASK_IVG11 |
+ IMASK_IVG10 | IMASK_IVG9 | IMASK_IVG8 | IMASK_IVG7 |
+ IMASK_IVGHW;
+
+ return 0;
+}
+
+#ifdef CONFIG_DO_IRQ_L1
+void do_irq(int vec, struct pt_regs *fp)__attribute__((l1_text));
+#endif
+
+void do_irq(int vec, struct pt_regs *fp)
+{
+ if (vec == EVT_IVTMR_P) {
+ vec = IRQ_CORETMR;
+ } else {
+ struct ivgx *ivg = ivg7_13[vec - IVG7].ifirst;
+ struct ivgx *ivg_stop = ivg7_13[vec - IVG7].istop;
+ unsigned long sic_status;
+
+ SSYNC();
+ sic_status = bfin_read_SIC_IMASK() & bfin_read_SIC_ISR();
+
+ for (;; ivg++) {
+ if (ivg >= ivg_stop) {
+ atomic_inc(&num_spurious);
+ return;
+ } else if (sic_status & ivg->isrflag)
+ break;
+ }
+ vec = ivg->irqno;
+ }
+ asm_do_IRQ(vec, fp);
+
+#ifdef CONFIG_KGDB
+ kgdb_process_breakpoint();
+#endif
+}
diff --git a/arch/blackfin/mach-common/irqpanic.c b/arch/blackfin/mach-common/irqpanic.c
new file mode 100644
index 0000000..f05e3da
--- /dev/null
+++ b/arch/blackfin/mach-common/irqpanic.c
@@ -0,0 +1,194 @@
+/*
+ * File: arch/blackfin/mach-common/irqpanic.c
+ * Based on:
+ * Author:
+ *
+ * Created: ?
+ * Description: panic kernel with dump information
+ *
+ * Modified: rgetz - added cache checking code 14Feb06
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/module.h>
+#include <linux/kernel_stat.h>
+#include <linux/sched.h>
+#include <asm/traps.h>
+#include <asm/blackfin.h>
+
+#include "../oprofile/op_blackfin.h"
+
+#ifdef CONFIG_DEBUG_ICACHE_CHECK
+#define L1_ICACHE_START 0xffa10000
+#define L1_ICACHE_END 0xffa13fff
+void irq_panic(int reason, struct pt_regs *regs) __attribute__ ((l1_text));
+#endif
+
+/*
+ * irq_panic - calls panic with string setup
+ */
+asmlinkage void irq_panic(int reason, struct pt_regs *regs)
+{
+ int sig = 0;
+ siginfo_t info;
+
+#ifdef CONFIG_DEBUG_ICACHE_CHECK
+ unsigned int cmd, tag, ca, cache_hi, cache_lo, *pa;
+ unsigned short i, j, die;
+ unsigned int bad[10][6];
+
+ /* check entire cache for coherency
+ * Since printk is in cacheable memory,
+ * don't call it until you have checked everything
+ */
+
+ die = 0;
+ i = 0;
+
+ /* check icache */
+
+ for (ca = L1_ICACHE_START; ca <= L1_ICACHE_END && i < 10; ca += 32) {
+
+ /* Grab various address bits for the itest_cmd fields */
+ cmd = (((ca & 0x3000) << 4) | /* ca[13:12] for SBNK[1:0] */
+ ((ca & 0x0c00) << 16) | /* ca[11:10] for WAYSEL[1:0] */
+ ((ca & 0x3f8)) | /* ca[09:03] for SET[4:0] and DW[1:0] */
+ 0); /* Access Tag, Read access */
+
+ SSYNC();
+ bfin_write_ITEST_COMMAND(cmd);
+ SSYNC();
+ tag = bfin_read_ITEST_DATA0();
+ SSYNC();
+
+ /* if tag is marked as valid, check it */
+ if (tag & 1) {
+ /* The icache is arranged in 4 groups of 64-bits */
+ for (j = 0; j < 32; j += 8) {
+ cmd = ((((ca + j) & 0x3000) << 4) | /* ca[13:12] for SBNK[1:0] */
+ (((ca + j) & 0x0c00) << 16) | /* ca[11:10] for WAYSEL[1:0] */
+ (((ca + j) & 0x3f8)) | /* ca[09:03] for SET[4:0] and DW[1:0] */
+ 4); /* Access Data, Read access */
+
+ SSYNC();
+ bfin_write_ITEST_COMMAND(cmd);
+ SSYNC();
+
+ cache_hi = bfin_read_ITEST_DATA1();
+ cache_lo = bfin_read_ITEST_DATA0();
+
+ pa = ((unsigned int *)((tag & 0xffffcc00) |
+ ((ca + j) & ~(0xffffcc00))));
+
+ /*
+ * Debugging this, enable
+ *
+ * printk("addr: %08x %08x%08x | %08x%08x\n",
+ * ((unsigned int *)((tag & 0xffffcc00) | ((ca+j) & ~(0xffffcc00)))),
+ * cache_hi, cache_lo, *(pa+1), *pa);
+ */
+
+ if (cache_hi != *(pa + 1) || cache_lo != *pa) {
+ /* Since icache is not working, stay out of it, by not printing */
+ die = 1;
+ bad[i][0] = (ca + j);
+ bad[i][1] = cache_hi;
+ bad[i][2] = cache_lo;
+ bad[i][3] = ((tag & 0xffffcc00) |
+ ((ca + j) & ~(0xffffcc00)));
+ bad[i][4] = *(pa + 1);
+ bad[i][5] = *(pa);
+ i++;
+ }
+ }
+ }
+ }
+ if (die) {
+ printk(KERN_EMERG "icache coherency error\n");
+ for (j = 0; j <= i; j++) {
+ printk(KERN_EMERG
+ "cache address : %08x cache value : %08x%08x\n",
+ bad[j][0], bad[j][1], bad[j][2]);
+ printk(KERN_EMERG
+ "physical address: %08x SDRAM value : %08x%08x\n",
+ bad[j][3], bad[j][4], bad[j][5]);
+ }
+ panic("icache coherency error");
+ } else {
+ printk(KERN_EMERG "icache checked, and OK\n");
+ }
+#endif
+
+ printk(KERN_EMERG "\n");
+ printk(KERN_EMERG "Exception: IRQ 0x%x entered\n", reason);
+ printk(KERN_EMERG " code=[0x%08lx], stack frame=0x%08lx, "
+ " bad PC=0x%08lx\n",
+ (unsigned long)regs->seqstat,
+ (unsigned long)regs,
+ (unsigned long)regs->pc);
+ if (reason == 0x5) {
+ printk(KERN_EMERG "----------- HARDWARE ERROR -----------\n");
+
+ /* There is only need to check for Hardware Errors, since other
+ * EXCEPTIONS are handled in TRAPS.c (MH)
+ */
+ switch (regs->seqstat & SEQSTAT_HWERRCAUSE) {
+ case (SEQSTAT_HWERRCAUSE_SYSTEM_MMR): /* System MMR Error */
+ info.si_code = BUS_ADRALN;
+ sig = SIGBUS;
+ printk(KERN_EMERG HWC_x2);
+ break;
+ case (SEQSTAT_HWERRCAUSE_EXTERN_ADDR): /* External Memory Addressing Error */
+ info.si_code = BUS_ADRERR;
+ sig = SIGBUS;
+ printk(KERN_EMERG HWC_x3);
+ break;
+ case (SEQSTAT_HWERRCAUSE_PERF_FLOW): /* Performance Monitor Overflow */
+ printk(KERN_EMERG HWC_x12);
+ break;
+ case (SEQSTAT_HWERRCAUSE_RAISE_5): /* RAISE 5 instruction */
+ printk(KERN_EMERG HWC_x18);
+ break;
+ default: /* Reserved */
+ printk(KERN_EMERG HWC_default);
+ break;
+ }
+ }
+
+ regs->ipend = bfin_read_IPEND();
+ dump_bfin_regs(regs, (void *)regs->pc);
+ if (0 == (info.si_signo = sig) || 0 == user_mode(regs)) /* in kernelspace */
+ panic("Unhandled IRQ or exceptions!\n");
+ else { /* in userspace */
+ info.si_errno = 0;
+ info.si_addr = (void *)regs->pc;
+ force_sig_info(sig, &info, current);
+ }
+}
+
+#ifdef CONFIG_HARDWARE_PM
+/*
+ * call the handler of Performance overflow
+ */
+asmlinkage void pm_overflow(int irq, struct pt_regs *regs)
+{
+ pm_overflow_handler(irq, regs);
+}
+#endif
diff --git a/arch/blackfin/mach-common/lock.S b/arch/blackfin/mach-common/lock.S
new file mode 100644
index 0000000..2cbb15b
--- /dev/null
+++ b/arch/blackfin/mach-common/lock.S
@@ -0,0 +1,204 @@
+/*
+ * File: arch/blackfin/mach-common/lock.S
+ * Based on:
+ * Author: LG Soft India
+ *
+ * Created: ?
+ * Description: kernel locks
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/linkage.h>
+#include <asm/cplb.h>
+#include <asm/blackfin.h>
+
+.text
+
+#ifdef CONFIG_BLKFIN_CACHE_LOCK
+
+/* When you come here, it is assumed that
+ * R0 - Which way to be locked
+ */
+
+ENTRY(_cache_grab_lock)
+
+ [--SP]=( R7:0,P5:0 );
+
+ P1.H = (IMEM_CONTROL >> 16);
+ P1.L = (IMEM_CONTROL & 0xFFFF);
+ P5.H = (ICPLB_ADDR0 >> 16);
+ P5.L = (ICPLB_ADDR0 & 0xFFFF);
+ P4.H = (ICPLB_DATA0 >> 16);
+ P4.L = (ICPLB_DATA0 & 0xFFFF);
+ R7 = R0;
+
+ /* If the code of interest already resides in the cache
+ * invalidate the entire cache itself.
+ * invalidate_entire_icache;
+ */
+
+ SP += -12;
+ [--SP] = RETS;
+ CALL _invalidate_entire_icache;
+ RETS = [SP++];
+ SP += 12;
+
+ /* Disable the Interrupts*/
+
+ CLI R3;
+
+.LLOCK_WAY:
+
+ /* Way0 - 0xFFA133E0
+ * Way1 - 0xFFA137E0
+ * Way2 - 0xFFA13BE0 Total Way Size = 4K
+ * Way3 - 0xFFA13FE0
+ */
+
+ /* Procedure Ex. -Set the locks for other ways by setting ILOC[3:1]
+ * Only Way0 of the instruction cache can now be
+ * replaced by a new code
+ */
+
+ R5 = R7;
+ CC = BITTST(R7,0);
+ IF CC JUMP .LCLEAR1;
+ R7 = 0;
+ BITSET(R7,0);
+ JUMP .LDONE1;
+
+.LCLEAR1:
+ R7 = 0;
+ BITCLR(R7,0);
+.LDONE1: R4 = R7 << 3;
+ R7 = [P1];
+ R7 = R7 | R4;
+ SSYNC; /* SSYNC required writing to IMEM_CONTROL. */
+ .align 8;
+ [P1] = R7;
+ SSYNC;
+
+ R7 = R5;
+ CC = BITTST(R7,1);
+ IF CC JUMP .LCLEAR2;
+ R7 = 0;
+ BITSET(R7,1);
+ JUMP .LDONE2;
+
+.LCLEAR2:
+ R7 = 0;
+ BITCLR(R7,1);
+.LDONE2: R4 = R7 << 3;
+ R7 = [P1];
+ R7 = R7 | R4;
+ SSYNC; /* SSYNC required writing to IMEM_CONTROL. */
+ .align 8;
+ [P1] = R7;
+ SSYNC;
+
+ R7 = R5;
+ CC = BITTST(R7,2);
+ IF CC JUMP .LCLEAR3;
+ R7 = 0;
+ BITSET(R7,2);
+ JUMP .LDONE3;
+.LCLEAR3:
+ R7 = 0;
+ BITCLR(R7,2);
+.LDONE3: R4 = R7 << 3;
+ R7 = [P1];
+ R7 = R7 | R4;
+ SSYNC; /* SSYNC required writing to IMEM_CONTROL. */
+ .align 8;
+ [P1] = R7;
+ SSYNC;
+
+
+ R7 = R5;
+ CC = BITTST(R7,3);
+ IF CC JUMP .LCLEAR4;
+ R7 = 0;
+ BITSET(R7,3);
+ JUMP .LDONE4;
+.LCLEAR4:
+ R7 = 0;
+ BITCLR(R7,3);
+.LDONE4: R4 = R7 << 3;
+ R7 = [P1];
+ R7 = R7 | R4;
+ SSYNC; /* SSYNC required writing to IMEM_CONTROL. */
+ .align 8;
+ [P1] = R7;
+ SSYNC;
+
+ STI R3;
+
+ ( R7:0,P5:0 ) = [SP++];
+
+ RTS;
+
+/* After the execution of critical code, the code is now locked into
+ * the cache way. Now we need to set ILOC.
+ *
+ * R0 - Which way to be locked
+ */
+
+ENTRY(_cache_lock)
+
+ [--SP]=( R7:0,P5:0 );
+
+ P1.H = (IMEM_CONTROL >> 16);
+ P1.L = (IMEM_CONTROL & 0xFFFF);
+
+ /* Disable the Interrupts*/
+ CLI R3;
+
+ R7 = [P1];
+ R2 = 0xFFFFFF87 (X);
+ R7 = R7 & R2;
+ R0 = R0 << 3;
+ R7 = R0 | R7;
+ SSYNC; /* SSYNC required writing to IMEM_CONTROL. */
+ .align 8;
+ [P1] = R7;
+ SSYNC;
+ /* Renable the Interrupts */
+ STI R3;
+
+ ( R7:0,P5:0 ) = [SP++];
+ RTS;
+
+#endif /* BLKFIN_CACHE_LOCK */
+
+/* Return the ILOC bits of IMEM_CONTROL
+ */
+
+ENTRY(_read_iloc)
+
+ P1.H = (IMEM_CONTROL >> 16);
+ P1.L = (IMEM_CONTROL & 0xFFFF);
+ R1 = 0xF;
+ R0 = [P1];
+ R0 = R0 >> 3;
+ R0 = R0 & R1;
+
+ RTS;
diff --git a/arch/blackfin/mach-common/pm.c b/arch/blackfin/mach-common/pm.c
new file mode 100644
index 0000000..deb2727
--- /dev/null
+++ b/arch/blackfin/mach-common/pm.c
@@ -0,0 +1,181 @@
+/*
+ * File: arch/blackfin/mach-common/pm.c
+ * Based on: arm/mach-omap/pm.c
+ * Author: Cliff Brake <cbrake@accelent.com> Copyright (c) 2001
+ *
+ * Created: 2001
+ * Description: Power management for the bfin
+ *
+ * Modified: Nicolas Pitre - PXA250 support
+ * Copyright (c) 2002 Monta Vista Software, Inc.
+ * David Singleton - OMAP1510
+ * Copyright (c) 2002 Monta Vista Software, Inc.
+ * Dirk Behme <dirk.behme@de.bosch.com> - OMAP1510/1610
+ * Copyright 2004
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/pm.h>
+#include <linux/sched.h>
+#include <linux/proc_fs.h>
+
+#include <asm/io.h>
+#include <asm/dpmc.h>
+#include <asm/irq.h>
+
+
+#ifdef CONFIG_PM_WAKEUP_GPIO_POLAR_H
+#define WAKEUP_TYPE PM_WAKE_HIGH
+#endif
+
+#ifdef CONFIG_PM_WAKEUP_GPIO_POLAR_L
+#define WAKEUP_TYPE PM_WAKE_LOW
+#endif
+
+#ifdef CONFIG_PM_WAKEUP_GPIO_POLAR_EDGE_F
+#define WAKEUP_TYPE PM_WAKE_FALLING
+#endif
+
+#ifdef CONFIG_PM_WAKEUP_GPIO_POLAR_EDGE_R
+#define WAKEUP_TYPE PM_WAKE_RISING
+#endif
+
+#ifdef CONFIG_PM_WAKEUP_GPIO_POLAR_EDGE_B
+#define WAKEUP_TYPE PM_WAKE_BOTH_EDGES
+#endif
+
+void bfin_pm_suspend_standby_enter(void)
+{
+#ifdef CONFIG_PM_WAKEUP_BY_GPIO
+ gpio_pm_wakeup_request(CONFIG_PM_WAKEUP_GPIO_NUMBER, WAKEUP_TYPE);
+#endif
+
+#if defined(CONFIG_PM_WAKEUP_BY_GPIO) || defined(CONFIG_PM_WAKEUP_GPIO_API)
+ {
+ u32 flags;
+
+ local_irq_save(flags);
+
+ sleep_deeper(gpio_pm_setup()); /*Goto Sleep*/
+
+ gpio_pm_restore();
+
+ bfin_write_SIC_IWR(IWR_ENABLE_ALL);
+
+ local_irq_restore(flags);
+ }
+#endif
+
+#if defined(CONFIG_PM_WAKEUP_GPIO_BY_SIC_IWR)
+ sleep_deeper(CONFIG_PM_WAKEUP_SIC_IWR);
+ bfin_write_SIC_IWR(IWR_ENABLE_ALL);
+#endif /* CONFIG_PM_WAKEUP_GPIO_BY_SIC_IWR */
+}
+
+
+/*
+ * bfin_pm_prepare - Do preliminary suspend work.
+ * @state: suspend state we're entering.
+ *
+ */
+static int bfin_pm_prepare(suspend_state_t state)
+{
+ int error = 0;
+
+ switch (state) {
+ case PM_SUSPEND_STANDBY:
+ break;
+ case PM_SUSPEND_MEM:
+ return -ENOTSUPP;
+
+ case PM_SUSPEND_DISK:
+ return -ENOTSUPP;
+
+ default:
+ return -EINVAL;
+ }
+
+ return error;
+}
+
+/*
+ * bfin_pm_enter - Actually enter a sleep state.
+ * @state: State we're entering.
+ *
+ */
+static int bfin_pm_enter(suspend_state_t state)
+{
+ switch (state) {
+ case PM_SUSPEND_STANDBY:
+ bfin_pm_suspend_standby_enter();
+ break;
+ case PM_SUSPEND_MEM:
+ return -ENOTSUPP;
+
+ case PM_SUSPEND_DISK:
+ return -ENOTSUPP;
+
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+/*
+ * bfin_pm_finish - Finish up suspend sequence.
+ * @state: State we're coming out of.
+ *
+ * This is called after we wake back up (or if entering the sleep state
+ * failed).
+ */
+static int bfin_pm_finish(suspend_state_t state)
+{
+ switch (state) {
+ case PM_SUSPEND_STANDBY:
+ break;
+
+ case PM_SUSPEND_MEM:
+ return -ENOTSUPP;
+
+ case PM_SUSPEND_DISK:
+ return -ENOTSUPP;
+
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+struct pm_ops bfin_pm_ops = {
+ .pm_disk_mode = PM_DISK_PLATFORM,
+ .prepare = bfin_pm_prepare,
+ .enter = bfin_pm_enter,
+ .finish = bfin_pm_finish,
+};
+
+static int __init bfin_pm_init(void)
+{
+ pm_set_ops(&bfin_pm_ops);
+ return 0;
+}
+
+__initcall(bfin_pm_init);
diff --git a/arch/blackfin/mm/Makefile b/arch/blackfin/mm/Makefile
new file mode 100644
index 0000000..2a7202c
--- /dev/null
+++ b/arch/blackfin/mm/Makefile
@@ -0,0 +1,5 @@
+#
+# arch/blackfin/mm/Makefile
+#
+
+obj-y := blackfin_sram.o init.o
diff --git a/arch/blackfin/mm/blackfin_sram.c b/arch/blackfin/mm/blackfin_sram.c
new file mode 100644
index 0000000..dd0c650
--- /dev/null
+++ b/arch/blackfin/mm/blackfin_sram.c
@@ -0,0 +1,540 @@
+/*
+ * File: arch/blackfin/mm/blackfin_sram.c
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description: SRAM driver for Blackfin ADSP-BF5xx
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/autoconf.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/miscdevice.h>
+#include <linux/ioport.h>
+#include <linux/fcntl.h>
+#include <linux/init.h>
+#include <linux/poll.h>
+#include <linux/proc_fs.h>
+#include <linux/spinlock.h>
+#include <linux/rtc.h>
+#include <asm/blackfin.h>
+#include "blackfin_sram.h"
+
+spinlock_t l1sram_lock, l1_data_sram_lock, l1_inst_sram_lock;
+
+#if CONFIG_L1_MAX_PIECE < 16
+#undef CONFIG_L1_MAX_PIECE
+#define CONFIG_L1_MAX_PIECE 16
+#endif
+
+#if CONFIG_L1_MAX_PIECE > 1024
+#undef CONFIG_L1_MAX_PIECE
+#define CONFIG_L1_MAX_PIECE 1024
+#endif
+
+#define SRAM_SLT_NULL 0
+#define SRAM_SLT_FREE 1
+#define SRAM_SLT_ALLOCATED 2
+
+/* the data structure for L1 scratchpad and DATA SRAM */
+struct l1_sram_piece {
+ void *paddr;
+ int size;
+ int flag;
+};
+
+static struct l1_sram_piece l1_ssram[CONFIG_L1_MAX_PIECE];
+
+#if L1_DATA_A_LENGTH != 0
+static struct l1_sram_piece l1_data_A_sram[CONFIG_L1_MAX_PIECE];
+#endif
+
+#if L1_DATA_B_LENGTH != 0
+static struct l1_sram_piece l1_data_B_sram[CONFIG_L1_MAX_PIECE];
+#endif
+
+#if L1_CODE_LENGTH != 0
+static struct l1_sram_piece l1_inst_sram[CONFIG_L1_MAX_PIECE];
+#endif
+
+/* L1 Scratchpad SRAM initialization function */
+void l1sram_init(void)
+{
+ printk(KERN_INFO "Blackfin Scratchpad data SRAM: %d KB\n",
+ L1_SCRATCH_LENGTH >> 10);
+
+ memset(&l1_ssram, 0x00, sizeof(l1_ssram));
+ l1_ssram[0].paddr = (void*)L1_SCRATCH_START;
+ l1_ssram[0].size = L1_SCRATCH_LENGTH;
+ l1_ssram[0].flag = SRAM_SLT_FREE;
+
+ /* mutex initialize */
+ spin_lock_init(&l1sram_lock);
+}
+
+void l1_data_sram_init(void)
+{
+#if L1_DATA_A_LENGTH != 0
+ printk(KERN_INFO "Blackfin DATA_A SRAM: %d KB\n",
+ L1_DATA_A_LENGTH >> 10);
+
+ memset(&l1_data_A_sram, 0x00, sizeof(l1_data_A_sram));
+ l1_data_A_sram[0].paddr = (void*)L1_DATA_A_START +
+ (_ebss_l1 - _sdata_l1);
+ l1_data_A_sram[0].size = L1_DATA_A_LENGTH - (_ebss_l1 - _sdata_l1);
+ l1_data_A_sram[0].flag = SRAM_SLT_FREE;
+#endif
+#if L1_DATA_B_LENGTH != 0
+ printk(KERN_INFO "Blackfin DATA_B SRAM: %d KB\n",
+ L1_DATA_B_LENGTH >> 10);
+
+ memset(&l1_data_B_sram, 0x00, sizeof(l1_data_B_sram));
+ l1_data_B_sram[0].paddr = (void*)L1_DATA_B_START;
+ l1_data_B_sram[0].size = L1_DATA_B_LENGTH;
+ l1_data_B_sram[0].flag = SRAM_SLT_FREE;
+#endif
+
+ /* mutex initialize */
+ spin_lock_init(&l1_data_sram_lock);
+}
+
+void l1_inst_sram_init(void)
+{
+#if L1_CODE_LENGTH != 0
+ printk(KERN_INFO "Blackfin Instruction SRAM: %d KB\n",
+ L1_CODE_LENGTH >> 10);
+
+ memset(&l1_inst_sram, 0x00, sizeof(l1_inst_sram));
+ l1_inst_sram[0].paddr = (void*)L1_CODE_START + (_etext_l1 - _stext_l1);
+ l1_inst_sram[0].size = L1_CODE_LENGTH - (_etext_l1 - _stext_l1);
+ l1_inst_sram[0].flag = SRAM_SLT_FREE;
+#endif
+
+ /* mutex initialize */
+ spin_lock_init(&l1_inst_sram_lock);
+}
+
+/* L1 memory allocate function */
+static void *_l1_sram_alloc(size_t size, struct l1_sram_piece *pfree, int count)
+{
+ int i, index = 0;
+ void *addr = NULL;
+
+ if (size <= 0)
+ return NULL;
+
+ /* Align the size */
+ size = (size + 3) & ~3;
+
+ /* not use the good method to match the best slot !!! */
+ /* search an available memeory slot */
+ for (i = 0; i < count; i++) {
+ if ((pfree[i].flag == SRAM_SLT_FREE)
+ && (pfree[i].size >= size)) {
+ addr = pfree[i].paddr;
+ pfree[i].flag = SRAM_SLT_ALLOCATED;
+ index = i;
+ break;
+ }
+ }
+ if (i >= count)
+ return NULL;
+
+ /* updated the NULL memeory slot !!! */
+ if (pfree[i].size > size) {
+ for (i = 0; i < count; i++) {
+ if (pfree[i].flag == SRAM_SLT_NULL) {
+ pfree[i].flag = SRAM_SLT_FREE;
+ pfree[i].paddr = addr + size;
+ pfree[i].size = pfree[index].size - size;
+ pfree[index].size = size;
+ break;
+ }
+ }
+ }
+
+ return addr;
+}
+
+/* Allocate the largest available block. */
+static void *_l1_sram_alloc_max(struct l1_sram_piece *pfree, int count,
+ unsigned long *psize)
+{
+ unsigned long best = 0;
+ int i, index = -1;
+ void *addr = NULL;
+
+ /* search an available memeory slot */
+ for (i = 0; i < count; i++) {
+ if (pfree[i].flag == SRAM_SLT_FREE && pfree[i].size > best) {
+ addr = pfree[i].paddr;
+ index = i;
+ best = pfree[i].size;
+ }
+ }
+ if (index < 0)
+ return NULL;
+ *psize = best;
+
+ pfree[index].flag = SRAM_SLT_ALLOCATED;
+ return addr;
+}
+
+/* L1 memory free function */
+static int _l1_sram_free(const void *addr,
+ struct l1_sram_piece *pfree, int count)
+{
+ int i, index = 0;
+
+ /* search the relevant memory slot */
+ for (i = 0; i < count; i++) {
+ if (pfree[i].paddr == addr) {
+ if (pfree[i].flag != SRAM_SLT_ALLOCATED) {
+ /* error log */
+ return -1;
+ }
+ index = i;
+ break;
+ }
+ }
+ if (i >= count)
+ return -1;
+
+ pfree[index].flag = SRAM_SLT_FREE;
+
+ /* link the next address slot */
+ for (i = 0; i < count; i++) {
+ if (((pfree[index].paddr + pfree[index].size) == pfree[i].paddr)
+ && (pfree[i].flag == SRAM_SLT_FREE)) {
+ pfree[i].flag = SRAM_SLT_NULL;
+ pfree[index].size += pfree[i].size;
+ pfree[index].flag = SRAM_SLT_FREE;
+ break;
+ }
+ }
+
+ /* link the last address slot */
+ for (i = 0; i < count; i++) {
+ if (((pfree[i].paddr + pfree[i].size) == pfree[index].paddr) &&
+ (pfree[i].flag == SRAM_SLT_FREE)) {
+ pfree[index].flag = SRAM_SLT_NULL;
+ pfree[i].size += pfree[index].size;
+ break;
+ }
+ }
+
+ return 0;
+}
+
+int sram_free(const void *addr)
+{
+ if (0) {}
+#if L1_CODE_LENGTH != 0
+ else if (addr >= (void *)L1_CODE_START
+ && addr < (void *)(L1_CODE_START + L1_CODE_LENGTH))
+ return l1_inst_sram_free(addr);
+#endif
+#if L1_DATA_A_LENGTH != 0
+ else if (addr >= (void *)L1_DATA_A_START
+ && addr < (void *)(L1_DATA_A_START + L1_DATA_A_LENGTH))
+ return l1_data_A_sram_free(addr);
+#endif
+#if L1_DATA_B_LENGTH != 0
+ else if (addr >= (void *)L1_DATA_B_START
+ && addr < (void *)(L1_DATA_B_START + L1_DATA_B_LENGTH))
+ return l1_data_B_sram_free(addr);
+#endif
+ else
+ return -1;
+}
+EXPORT_SYMBOL(sram_free);
+
+void *l1_data_A_sram_alloc(size_t size)
+{
+ unsigned flags;
+ void *addr = NULL;
+
+ /* add mutex operation */
+ spin_lock_irqsave(&l1_data_sram_lock, flags);
+
+#if L1_DATA_A_LENGTH != 0
+ addr = _l1_sram_alloc(size, l1_data_A_sram, ARRAY_SIZE(l1_data_A_sram));
+#endif
+
+ /* add mutex operation */
+ spin_unlock_irqrestore(&l1_data_sram_lock, flags);
+
+ pr_debug("Allocated address in l1_data_A_sram_alloc is 0x%lx+0x%lx\n",
+ (long unsigned int)addr, size);
+
+ return addr;
+}
+EXPORT_SYMBOL(l1_data_A_sram_alloc);
+
+int l1_data_A_sram_free(const void *addr)
+{
+ unsigned flags;
+ int ret;
+
+ /* add mutex operation */
+ spin_lock_irqsave(&l1_data_sram_lock, flags);
+
+#if L1_DATA_A_LENGTH != 0
+ ret = _l1_sram_free(addr,
+ l1_data_A_sram, ARRAY_SIZE(l1_data_A_sram));
+#else
+ ret = -1;
+#endif
+
+ /* add mutex operation */
+ spin_unlock_irqrestore(&l1_data_sram_lock, flags);
+
+ return ret;
+}
+EXPORT_SYMBOL(l1_data_A_sram_free);
+
+void *l1_data_B_sram_alloc(size_t size)
+{
+#if L1_DATA_B_LENGTH != 0
+ unsigned flags;
+ void *addr;
+
+ /* add mutex operation */
+ spin_lock_irqsave(&l1_data_sram_lock, flags);
+
+ addr = _l1_sram_alloc(size, l1_data_B_sram, ARRAY_SIZE(l1_data_B_sram));
+
+ /* add mutex operation */
+ spin_unlock_irqrestore(&l1_data_sram_lock, flags);
+
+ pr_debug("Allocated address in l1_data_B_sram_alloc is 0x%lx+0x%lx\n",
+ (long unsigned int)addr, size);
+
+ return addr;
+#else
+ return NULL;
+#endif
+}
+EXPORT_SYMBOL(l1_data_B_sram_alloc);
+
+int l1_data_B_sram_free(const void *addr)
+{
+#if L1_DATA_B_LENGTH != 0
+ unsigned flags;
+ int ret;
+
+ /* add mutex operation */
+ spin_lock_irqsave(&l1_data_sram_lock, flags);
+
+ ret = _l1_sram_free(addr, l1_data_B_sram, ARRAY_SIZE(l1_data_B_sram));
+
+ /* add mutex operation */
+ spin_unlock_irqrestore(&l1_data_sram_lock, flags);
+
+ return ret;
+#else
+ return -1;
+#endif
+}
+EXPORT_SYMBOL(l1_data_B_sram_free);
+
+void *l1_data_sram_alloc(size_t size)
+{
+ void *addr = l1_data_A_sram_alloc(size);
+
+ if (!addr)
+ addr = l1_data_B_sram_alloc(size);
+
+ return addr;
+}
+EXPORT_SYMBOL(l1_data_sram_alloc);
+
+void *l1_data_sram_zalloc(size_t size)
+{
+ void *addr = l1_data_sram_alloc(size);
+
+ if (addr)
+ memset(addr, 0x00, size);
+
+ return addr;
+}
+EXPORT_SYMBOL(l1_data_sram_zalloc);
+
+int l1_data_sram_free(const void *addr)
+{
+ int ret;
+ ret = l1_data_A_sram_free(addr);
+ if (ret == -1)
+ ret = l1_data_B_sram_free(addr);
+ return ret;
+}
+EXPORT_SYMBOL(l1_data_sram_free);
+
+void *l1_inst_sram_alloc(size_t size)
+{
+#if L1_DATA_A_LENGTH != 0
+ unsigned flags;
+ void *addr;
+
+ /* add mutex operation */
+ spin_lock_irqsave(&l1_inst_sram_lock, flags);
+
+ addr = _l1_sram_alloc(size, l1_inst_sram, ARRAY_SIZE(l1_inst_sram));
+
+ /* add mutex operation */
+ spin_unlock_irqrestore(&l1_inst_sram_lock, flags);
+
+ pr_debug("Allocated address in l1_inst_sram_alloc is 0x%lx+0x%lx\n",
+ (long unsigned int)addr, size);
+
+ return addr;
+#else
+ return NULL;
+#endif
+}
+EXPORT_SYMBOL(l1_inst_sram_alloc);
+
+int l1_inst_sram_free(const void *addr)
+{
+#if L1_CODE_LENGTH != 0
+ unsigned flags;
+ int ret;
+
+ /* add mutex operation */
+ spin_lock_irqsave(&l1_inst_sram_lock, flags);
+
+ ret = _l1_sram_free(addr, l1_inst_sram, ARRAY_SIZE(l1_inst_sram));
+
+ /* add mutex operation */
+ spin_unlock_irqrestore(&l1_inst_sram_lock, flags);
+
+ return ret;
+#else
+ return -1;
+#endif
+}
+EXPORT_SYMBOL(l1_inst_sram_free);
+
+/* L1 Scratchpad memory allocate function */
+void *l1sram_alloc(size_t size)
+{
+ unsigned flags;
+ void *addr;
+
+ /* add mutex operation */
+ spin_lock_irqsave(&l1sram_lock, flags);
+
+ addr = _l1_sram_alloc(size, l1_ssram, ARRAY_SIZE(l1_ssram));
+
+ /* add mutex operation */
+ spin_unlock_irqrestore(&l1sram_lock, flags);
+
+ return addr;
+}
+
+/* L1 Scratchpad memory allocate function */
+void *l1sram_alloc_max(size_t *psize)
+{
+ unsigned flags;
+ void *addr;
+
+ /* add mutex operation */
+ spin_lock_irqsave(&l1sram_lock, flags);
+
+ addr = _l1_sram_alloc_max(l1_ssram, ARRAY_SIZE(l1_ssram), psize);
+
+ /* add mutex operation */
+ spin_unlock_irqrestore(&l1sram_lock, flags);
+
+ return addr;
+}
+
+/* L1 Scratchpad memory free function */
+int l1sram_free(const void *addr)
+{
+ unsigned flags;
+ int ret;
+
+ /* add mutex operation */
+ spin_lock_irqsave(&l1sram_lock, flags);
+
+ ret = _l1_sram_free(addr, l1_ssram, ARRAY_SIZE(l1_ssram));
+
+ /* add mutex operation */
+ spin_unlock_irqrestore(&l1sram_lock, flags);
+
+ return ret;
+}
+
+int sram_free_with_lsl(const void *addr)
+{
+ struct sram_list_struct *lsl, **tmp;
+ struct mm_struct *mm = current->mm;
+
+ for (tmp = &mm->context.sram_list; *tmp; tmp = &(*tmp)->next)
+ if ((*tmp)->addr == addr)
+ goto found;
+ return -1;
+found:
+ lsl = *tmp;
+ sram_free(addr);
+ *tmp = lsl->next;
+ kfree(lsl);
+
+ return 0;
+}
+EXPORT_SYMBOL(sram_free_with_lsl);
+
+void *sram_alloc_with_lsl(size_t size, unsigned long flags)
+{
+ void *addr = NULL;
+ struct sram_list_struct *lsl = NULL;
+ struct mm_struct *mm = current->mm;
+
+ lsl = kmalloc(sizeof(struct sram_list_struct), GFP_KERNEL);
+ if (!lsl)
+ return NULL;
+ memset(lsl, 0, sizeof(*lsl));
+
+ if (flags & L1_INST_SRAM)
+ addr = l1_inst_sram_alloc(size);
+
+ if (addr == NULL && (flags & L1_DATA_A_SRAM))
+ addr = l1_data_A_sram_alloc(size);
+
+ if (addr == NULL && (flags & L1_DATA_B_SRAM))
+ addr = l1_data_B_sram_alloc(size);
+
+ if (addr == NULL) {
+ kfree(lsl);
+ return NULL;
+ }
+ lsl->addr = addr;
+ lsl->length = size;
+ lsl->next = mm->context.sram_list;
+ mm->context.sram_list = lsl;
+ return addr;
+}
+EXPORT_SYMBOL(sram_alloc_with_lsl);
diff --git a/arch/blackfin/mm/blackfin_sram.h b/arch/blackfin/mm/blackfin_sram.h
new file mode 100644
index 0000000..0fb73b7
--- /dev/null
+++ b/arch/blackfin/mm/blackfin_sram.h
@@ -0,0 +1,38 @@
+/*
+ * File: arch/blackfin/mm/blackfin_sram.h
+ * Based on: arch/blackfin/mm/blackfin_sram.c
+ * Author: Mike Frysinger
+ *
+ * Created: Aug 2006
+ * Description: Local prototypes meant for internal use only
+ *
+ * Modified:
+ * Copyright 2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef __BLACKFIN_SRAM_H__
+#define __BLACKFIN_SRAM_H__
+
+extern void l1sram_init(void);
+extern void l1_inst_sram_init(void);
+extern void l1_data_sram_init(void);
+extern void *l1sram_alloc(size_t);
+
+#endif
diff --git a/arch/blackfin/mm/init.c b/arch/blackfin/mm/init.c
new file mode 100644
index 0000000..73f72ab
--- /dev/null
+++ b/arch/blackfin/mm/init.c
@@ -0,0 +1,208 @@
+/*
+ * File: arch/blackfin/mm/init.c
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/swap.h>
+#include <linux/bootmem.h>
+#include <asm/bfin-global.h>
+#include <asm/uaccess.h>
+#include <asm/l1layout.h>
+#include "blackfin_sram.h"
+
+/*
+ * BAD_PAGE is the page that is used for page faults when linux
+ * is out-of-memory. Older versions of linux just did a
+ * do_exit(), but using this instead means there is less risk
+ * for a process dying in kernel mode, possibly leaving a inode
+ * unused etc..
+ *
+ * BAD_PAGETABLE is the accompanying page-table: it is initialized
+ * to point to BAD_PAGE entries.
+ *
+ * ZERO_PAGE is a special page that is used for zero-initialized
+ * data and COW.
+ */
+static unsigned long empty_bad_page_table;
+
+static unsigned long empty_bad_page;
+
+unsigned long empty_zero_page;
+
+void show_mem(void)
+{
+ unsigned long i;
+ int free = 0, total = 0, reserved = 0, shared = 0;
+
+ int cached = 0;
+ printk(KERN_INFO "Mem-info:\n");
+ show_free_areas();
+ i = max_mapnr;
+ while (i-- > 0) {
+ total++;
+ if (PageReserved(mem_map + i))
+ reserved++;
+ else if (PageSwapCache(mem_map + i))
+ cached++;
+ else if (!page_count(mem_map + i))
+ free++;
+ else
+ shared += page_count(mem_map + i) - 1;
+ }
+ printk(KERN_INFO "%d pages of RAM\n", total);
+ printk(KERN_INFO "%d free pages\n", free);
+ printk(KERN_INFO "%d reserved pages\n", reserved);
+ printk(KERN_INFO "%d pages shared\n", shared);
+ printk(KERN_INFO "%d pages swap cached\n", cached);
+}
+
+/*
+ * paging_init() continues the virtual memory environment setup which
+ * was begun by the code in arch/head.S.
+ * The parameters are pointers to where to stick the starting and ending
+ * addresses of available kernel virtual memory.
+ */
+void paging_init(void)
+{
+ /*
+ * make sure start_mem is page aligned, otherwise bootmem and
+ * page_alloc get different views og the world
+ */
+ unsigned long end_mem = memory_end & PAGE_MASK;
+
+ pr_debug("start_mem is %#lx virtual_end is %#lx\n", PAGE_ALIGN(memory_start), end_mem);
+
+ /*
+ * initialize the bad page table and bad page to point
+ * to a couple of allocated pages
+ */
+ empty_bad_page_table = (unsigned long)alloc_bootmem_pages(PAGE_SIZE);
+ empty_bad_page = (unsigned long)alloc_bootmem_pages(PAGE_SIZE);
+ empty_zero_page = (unsigned long)alloc_bootmem_pages(PAGE_SIZE);
+ memset((void *)empty_zero_page, 0, PAGE_SIZE);
+
+ /*
+ * Set up SFC/DFC registers (user data space)
+ */
+ set_fs(KERNEL_DS);
+
+ pr_debug("free_area_init -> start_mem is %#lx virtual_end is %#lx\n",
+ PAGE_ALIGN(memory_start), end_mem);
+
+ {
+ unsigned long zones_size[MAX_NR_ZONES] = { 0, };
+
+ zones_size[ZONE_NORMAL] = (end_mem - PAGE_OFFSET) >> PAGE_SHIFT;
+#ifdef CONFIG_HIGHMEM
+ zones_size[ZONE_HIGHMEM] = 0;
+#endif
+ free_area_init(zones_size);
+ }
+}
+
+void mem_init(void)
+{
+ unsigned int codek = 0, datak = 0, initk = 0;
+ unsigned long tmp;
+ unsigned int len = _ramend - _rambase;
+ unsigned long start_mem = memory_start;
+ unsigned long end_mem = memory_end;
+
+ end_mem &= PAGE_MASK;
+ high_memory = (void *)end_mem;
+
+ start_mem = PAGE_ALIGN(start_mem);
+ max_mapnr = num_physpages = MAP_NR(high_memory);
+ printk(KERN_INFO "Physical pages: %lx\n", num_physpages);
+
+ /* This will put all memory onto the freelists. */
+ totalram_pages = free_all_bootmem();
+
+ codek = (_etext - _stext) >> 10;
+ datak = (__bss_stop - __bss_start) >> 10;
+ initk = (__init_end - __init_begin) >> 10;
+
+ tmp = nr_free_pages() << PAGE_SHIFT;
+ printk(KERN_INFO
+ "Memory available: %luk/%uk RAM, (%uk init code, %uk kernel code, %uk data, %uk dma)\n",
+ tmp >> 10, len >> 10, initk, codek, datak, DMA_UNCACHED_REGION >> 10);
+
+ /* Initialize the blackfin L1 Memory. */
+ l1sram_init();
+ l1_data_sram_init();
+ l1_inst_sram_init();
+
+ /* Allocate this once; never free it. We assume this gives us a
+ pointer to the start of L1 scratchpad memory; panic if it
+ doesn't. */
+ tmp = (unsigned long)l1sram_alloc(sizeof(struct l1_scratch_task_info));
+ if (tmp != (unsigned long)L1_SCRATCH_TASK_INFO) {
+ printk(KERN_EMERG "mem_init(): Did not get the right address from l1sram_alloc: %08lx != %08lx\n",
+ tmp, (unsigned long)L1_SCRATCH_TASK_INFO);
+ panic("No L1, time to give up\n");
+ }
+}
+
+#ifdef CONFIG_BLK_DEV_INITRD
+void free_initrd_mem(unsigned long start, unsigned long end)
+{
+ int pages = 0;
+ for (; start < end; start += PAGE_SIZE) {
+ ClearPageReserved(virt_to_page(start));
+ init_page_count(virt_to_page(start));
+ free_page(start);
+ totalram_pages++;
+ pages++;
+ }
+ printk(KERN_NOTICE "Freeing initrd memory: %dk freed\n", pages);
+}
+#endif
+
+void free_initmem(void)
+{
+#ifdef CONFIG_RAMKERNEL
+ unsigned long addr;
+/*
+ * the following code should be cool even if these sections
+ * are not page aligned.
+ */
+ addr = PAGE_ALIGN((unsigned long)(__init_begin));
+ /* next to check that the page we free is not a partial page */
+ for (; addr + PAGE_SIZE < (unsigned long)(__init_end);
+ addr += PAGE_SIZE) {
+ ClearPageReserved(virt_to_page(addr));
+ init_page_count(virt_to_page(addr));
+ free_page(addr);
+ totalram_pages++;
+ }
+ printk(KERN_NOTICE
+ "Freeing unused kernel memory: %ldk freed (0x%x - 0x%x)\n",
+ (addr - PAGE_ALIGN((long)__init_begin)) >> 10,
+ (int)(PAGE_ALIGN((unsigned long)(__init_begin))),
+ (int)(addr - PAGE_SIZE));
+#endif
+}
diff --git a/arch/blackfin/oprofile/Kconfig b/arch/blackfin/oprofile/Kconfig
new file mode 100644
index 0000000..0a2fd99
--- /dev/null
+++ b/arch/blackfin/oprofile/Kconfig
@@ -0,0 +1,29 @@
+menu "Profiling support"
+depends on EXPERIMENTAL
+
+config PROFILING
+ bool "Profiling support (EXPERIMENTAL)"
+ help
+ Say Y here to enable the extended profiling support mechanisms used
+ by profilers such as OProfile.
+
+config OPROFILE
+ tristate "OProfile system profiling (EXPERIMENTAL)"
+ depends on PROFILING
+ help
+ OProfile is a profiling system capable of profiling the
+ whole system, include the kernel, kernel modules, libraries,
+ and applications.
+
+ If unsure, say N.
+
+config HARDWARE_PM
+ tristate "Hardware Performance Monitor Profiling"
+ depends on PROFILING
+ help
+ take use of hardware performance monitor to profiling the kernel
+ and application.
+
+ If unsure, say N.
+
+endmenu
diff --git a/arch/blackfin/oprofile/Makefile b/arch/blackfin/oprofile/Makefile
new file mode 100644
index 0000000..634e300
--- /dev/null
+++ b/arch/blackfin/oprofile/Makefile
@@ -0,0 +1,14 @@
+#
+# arch/blackfin/oprofile/Makefile
+#
+
+obj-$(CONFIG_OPROFILE) += oprofile.o
+
+DRIVER_OBJS := $(addprefix ../../../drivers/oprofile/, \
+ oprof.o cpu_buffer.o buffer_sync.o \
+ event_buffer.o oprofile_files.o \
+ oprofilefs.o oprofile_stats.o \
+ timer_int.o )
+
+oprofile-y := $(DRIVER_OBJS) common.o
+oprofile-$(CONFIG_HARDWARE_PM) += op_model_bf533.o
diff --git a/arch/blackfin/oprofile/common.c b/arch/blackfin/oprofile/common.c
new file mode 100644
index 0000000..009a170
--- /dev/null
+++ b/arch/blackfin/oprofile/common.c
@@ -0,0 +1,168 @@
+/*
+ * File: arch/blackfin/oprofile/common.c
+ * Based on: arch/alpha/oprofile/common.c
+ * Author: Anton Blanchard <anton@au.ibm.com>
+ *
+ * Created:
+ * Description:
+ *
+ * Modified:
+ * Copyright (C) 2004 Anton Blanchard <anton@au.ibm.com>, IBM
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/oprofile.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/errno.h>
+#include <linux/mutex.h>
+
+#include <asm/ptrace.h>
+#include <asm/system.h>
+#include <asm/blackfin.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+
+#include "op_blackfin.h"
+
+#define BFIN_533_ID 0xE5040003
+#define BFIN_537_ID 0xE5040002
+
+static int pfmon_enabled;
+static struct mutex pfmon_lock;
+
+struct op_bfin533_model *model;
+
+struct op_counter_config ctr[OP_MAX_COUNTER];
+
+static int op_bfin_setup(void)
+{
+ int ret;
+
+ /* Pre-compute the values to stuff in the hardware registers. */
+ spin_lock(&oprofilefs_lock);
+ ret = model->reg_setup(ctr);
+ spin_unlock(&oprofilefs_lock);
+
+ return ret;
+}
+
+static void op_bfin_shutdown(void)
+{
+#if 0
+ /* what is the difference between shutdown and stop? */
+#endif
+}
+
+static int op_bfin_start(void)
+{
+ int ret = -EBUSY;
+
+ printk(KERN_INFO "KSDBG:in %s\n", __FUNCTION__);
+ mutex_lock(&pfmon_lock);
+ if (!pfmon_enabled) {
+ ret = model->start(ctr);
+ pfmon_enabled = !ret;
+ }
+ mutex_unlock(&pfmon_lock);
+
+ return ret;
+}
+
+static void op_bfin_stop(void)
+{
+ mutex_lock(&pfmon_lock);
+ if (pfmon_enabled) {
+ model->stop();
+ pfmon_enabled = 0;
+ }
+ mutex_unlock(&pfmon_lock);
+}
+
+static int op_bfin_create_files(struct super_block *sb, struct dentry *root)
+{
+ int i;
+
+ for (i = 0; i < model->num_counters; ++i) {
+ struct dentry *dir;
+ char buf[3];
+ printk(KERN_INFO "Oprofile: creating files... \n");
+
+ snprintf(buf, sizeof buf, "%d", i);
+ dir = oprofilefs_mkdir(sb, root, buf);
+
+ oprofilefs_create_ulong(sb, dir, "enabled", &ctr[i].enabled);
+ oprofilefs_create_ulong(sb, dir, "event", &ctr[i].event);
+ oprofilefs_create_ulong(sb, dir, "count", &ctr[i].count);
+ /*
+ * We dont support per counter user/kernel selection, but
+ * we leave the entries because userspace expects them
+ */
+ oprofilefs_create_ulong(sb, dir, "kernel", &ctr[i].kernel);
+ oprofilefs_create_ulong(sb, dir, "user", &ctr[i].user);
+ oprofilefs_create_ulong(sb, dir, "unit_mask",
+ &ctr[i].unit_mask);
+ }
+
+ return 0;
+}
+int __init oprofile_arch_init(struct oprofile_operations *ops)
+{
+#ifdef CONFIG_HARDWARE_PM
+ unsigned int dspid;
+
+ mutex_init(&pfmon_lock);
+
+ dspid = bfin_read_DSPID();
+
+ printk(KERN_INFO "Oprofile got the cpu id is 0x%x. \n", dspid);
+
+ switch (dspid) {
+ case BFIN_533_ID:
+ model = &op_model_bfin533;
+ model->num_counters = 2;
+ break;
+ case BFIN_537_ID:
+ model = &op_model_bfin533;
+ model->num_counters = 2;
+ break;
+ default:
+ return -ENODEV;
+ }
+
+ ops->cpu_type = model->name;
+ ops->create_files = op_bfin_create_files;
+ ops->setup = op_bfin_setup;
+ ops->shutdown = op_bfin_shutdown;
+ ops->start = op_bfin_start;
+ ops->stop = op_bfin_stop;
+
+ printk(KERN_INFO "oprofile: using %s performance monitoring.\n",
+ ops->cpu_type);
+
+ return 0;
+#else
+ return -1;
+#endif
+}
+
+void oprofile_arch_exit(void)
+{
+}
diff --git a/arch/blackfin/oprofile/op_blackfin.h b/arch/blackfin/oprofile/op_blackfin.h
new file mode 100644
index 0000000..f88f446
--- /dev/null
+++ b/arch/blackfin/oprofile/op_blackfin.h
@@ -0,0 +1,98 @@
+/*
+ * File: arch/blackfin/oprofile/op_blackfin.h
+ * Based on:
+ * Author: Anton Blanchard <anton@au.ibm.com>
+ *
+ * Created:
+ * Description:
+ *
+ * Modified:
+ * Copyright (C) 2004 Anton Blanchard <anton@au.ibm.com>, IBM
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef OP_BLACKFIN_H
+#define OP_BLACKFIN_H 1
+
+#define OP_MAX_COUNTER 2
+
+#include <asm/blackfin.h>
+
+/* Per-counter configuration as set via oprofilefs. */
+struct op_counter_config {
+ unsigned long valid;
+ unsigned long enabled;
+ unsigned long event;
+ unsigned long count;
+ unsigned long kernel;
+ unsigned long user;
+ unsigned long unit_mask;
+};
+
+/* System-wide configuration as set via oprofilefs. */
+struct op_system_config {
+ unsigned long enable_kernel;
+ unsigned long enable_user;
+};
+
+/* Per-arch configuration */
+struct op_bfin533_model {
+ int (*reg_setup) (struct op_counter_config *);
+ int (*start) (struct op_counter_config *);
+ void (*stop) (void);
+ int num_counters;
+ char *name;
+};
+
+extern struct op_bfin533_model op_model_bfin533;
+
+static inline unsigned int ctr_read(void)
+{
+ unsigned int tmp;
+
+ tmp = bfin_read_PFCTL();
+ __builtin_bfin_csync();
+
+ return tmp;
+}
+
+static inline void ctr_write(unsigned int val)
+{
+ bfin_write_PFCTL(val);
+ __builtin_bfin_csync();
+}
+
+static inline void count_read(unsigned int *count)
+{
+ count[0] = bfin_read_PFCNTR0();
+ count[1] = bfin_read_PFCNTR1();
+ __builtin_bfin_csync();
+}
+
+static inline void count_write(unsigned int *count)
+{
+ bfin_write_PFCNTR0(count[0]);
+ bfin_write_PFCNTR1(count[1]);
+ __builtin_bfin_csync();
+}
+
+extern int pm_overflow_handler(int irq, struct pt_regs *regs);
+
+#endif
diff --git a/arch/blackfin/oprofile/op_model_bf533.c b/arch/blackfin/oprofile/op_model_bf533.c
new file mode 100644
index 0000000..b7a20a0
--- /dev/null
+++ b/arch/blackfin/oprofile/op_model_bf533.c
@@ -0,0 +1,161 @@
+/*
+ * File: arch/blackfin/oprofile/op_model_bf533.c
+ * Based on:
+ * Author: Anton Blanchard <anton@au.ibm.com>
+ *
+ * Created:
+ * Description:
+ *
+ * Modified:
+ * Copyright (C) 2004 Anton Blanchard <anton@au.ibm.com>, IBM
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/oprofile.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/interrupt.h>
+#include <asm/ptrace.h>
+#include <asm/system.h>
+#include <asm/processor.h>
+#include <asm/blackfin.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+
+#include "op_blackfin.h"
+
+#define PM_ENABLE 0x01;
+#define PM_CTL1_ENABLE 0x18
+#define PM_CTL0_ENABLE 0xC000
+#define COUNT_EDGE_ONLY 0x3000000
+
+static int oprofile_running;
+
+static unsigned curr_pfctl, curr_count[2];
+
+static int bfin533_reg_setup(struct op_counter_config *ctr)
+{
+ unsigned int pfctl = ctr_read();
+ unsigned int count[2];
+
+ /* set Blackfin perf monitor regs with ctr */
+ if (ctr[0].enabled) {
+ pfctl |= (PM_CTL0_ENABLE | ((char)ctr[0].event << 5));
+ count[0] = 0xFFFFFFFF - ctr[0].count;
+ curr_count[0] = count[0];
+ }
+ if (ctr[1].enabled) {
+ pfctl |= (PM_CTL1_ENABLE | ((char)ctr[1].event << 16));
+ count[1] = 0xFFFFFFFF - ctr[1].count;
+ curr_count[1] = count[1];
+ }
+
+ pr_debug("ctr[0].enabled=%d,ctr[1].enabled=%d,ctr[0].event<<5=0x%x,ctr[1].event<<16=0x%x\n", ctr[0].enabled, ctr[1].enabled, ctr[0].event << 5, ctr[1].event << 16);
+ pfctl |= COUNT_EDGE_ONLY;
+ curr_pfctl = pfctl;
+
+ pr_debug("write 0x%x to pfctl\n", pfctl);
+ ctr_write(pfctl);
+ count_write(count);
+
+ return 0;
+}
+
+static int bfin533_start(struct op_counter_config *ctr)
+{
+ unsigned int pfctl = ctr_read();
+
+ pfctl |= PM_ENABLE;
+ curr_pfctl = pfctl;
+
+ ctr_write(pfctl);
+
+ oprofile_running = 1;
+ pr_debug("start oprofile counter \n");
+
+ return 0;
+}
+
+static void bfin533_stop(void)
+{
+ int pfctl;
+
+ pfctl = ctr_read();
+ pfctl &= ~PM_ENABLE;
+ /* freeze counters */
+ ctr_write(pfctl);
+
+ oprofile_running = 0;
+ pr_debug("stop oprofile counter \n");
+}
+
+static int get_kernel(void)
+{
+ int ipend, is_kernel;
+
+ ipend = bfin_read_IPEND();
+
+ /* test bit 15 */
+ is_kernel = ((ipend & 0x8000) != 0);
+
+ return is_kernel;
+}
+
+int pm_overflow_handler(int irq, struct pt_regs *regs)
+{
+ int is_kernel;
+ int i, cpu;
+ unsigned int pc, pfctl;
+ unsigned int count[2];
+
+ pr_debug("get interrupt in %s\n", __FUNCTION__);
+ if (oprofile_running == 0) {
+ pr_debug("error: entering interrupt when oprofile is stopped.\n\r");
+ return -1;
+ }
+
+ is_kernel = get_kernel();
+ cpu = smp_processor_id();
+ pc = regs->pc;
+ pfctl = ctr_read();
+
+ /* read the two event counter regs */
+ count_read(count);
+
+ /* if the counter overflows, add sample to oprofile buffer */
+ for (i = 0; i < 2; ++i) {
+ if (oprofile_running) {
+ oprofile_add_sample(regs, i);
+ }
+ }
+
+ /* reset the perfmon counter */
+ ctr_write(curr_pfctl);
+ count_write(curr_count);
+ return 0;
+}
+
+struct op_bfin533_model op_model_bfin533 = {
+ .reg_setup = bfin533_reg_setup,
+ .start = bfin533_start,
+ .stop = bfin533_stop,
+ .num_counters = 2,
+ .name = "blackfin/bf533"
+};
diff --git a/arch/blackfin/oprofile/timer_int.c b/arch/blackfin/oprofile/timer_int.c
new file mode 100644
index 0000000..8fba16c
--- /dev/null
+++ b/arch/blackfin/oprofile/timer_int.c
@@ -0,0 +1,74 @@
+/*
+ * File: arch/blackfin/oprofile/timer_int.c
+ * Based on:
+ * Author: Michael Kang
+ *
+ * Created:
+ * Description:
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/irq.h>
+#include <linux/oprofile.h>
+
+#include <asm/ptrace.h>
+
+static void enable_sys_timer0()
+{
+}
+static void disable_sys_timer0()
+{
+}
+
+static irqreturn_t sys_timer0_int_handler(int irq, void *dev_id,
+ struct pt_regs *regs)
+{
+ oprofile_add_sample(regs, 0);
+ return IRQ_HANDLED;
+}
+
+static int sys_timer0_start(void)
+{
+ enable_sys_timer0();
+ return request_irq(IVG11, sys_timer0_int_handler, 0, "sys_timer0", NULL);
+}
+
+static void sys_timer0_stop(void)
+{
+ disable_sys_timer();
+}
+
+int __init sys_timer0_init(struct oprofile_operations *ops)
+{
+ extern int nmi_active;
+
+ if (nmi_active <= 0)
+ return -ENODEV;
+
+ ops->start = timer_start;
+ ops->stop = timer_stop;
+ ops->cpu_type = "timer";
+ printk(KERN_INFO "oprofile: using NMI timer interrupt.\n");
+ return 0;
+}
diff --git a/arch/cris/arch-v32/kernel/fasttimer.c b/arch/cris/arch-v32/kernel/fasttimer.c
index 5daeb6f..79e1e4c 100644
--- a/arch/cris/arch-v32/kernel/fasttimer.c
+++ b/arch/cris/arch-v32/kernel/fasttimer.c
@@ -603,23 +603,8 @@
#ifdef CONFIG_PROC_FS
static int proc_fasttimer_read(char *buf, char **start, off_t offset, int len
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,2,0)
- ,int *eof, void *data_unused
-#else
- ,int unused
-#endif
- );
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,2,0)
+ ,int *eof, void *data_unused);
static struct proc_dir_entry *fasttimer_proc_entry;
-#else
-static struct proc_dir_entry fasttimer_proc_entry =
-{
- 0, 9, "fasttimer",
- S_IFREG | S_IRUGO, 1, 0, 0,
- 0, NULL /* ops -- default to array */,
- &proc_fasttimer_read /* get_info */,
-};
-#endif
#endif /* CONFIG_PROC_FS */
#ifdef CONFIG_PROC_FS
@@ -628,12 +613,7 @@
#define BIG_BUF_SIZE (500 + NUM_TIMER_STATS * 300)
static int proc_fasttimer_read(char *buf, char **start, off_t offset, int len
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,2,0)
- ,int *eof, void *data_unused
-#else
- ,int unused
-#endif
- )
+ ,int *eof, void *data_unused)
{
unsigned long flags;
int i = 0;
@@ -808,9 +788,7 @@
memcpy(buf, bigbuf + offset, len);
*start = buf;
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,2,0)
*eof = 1;
-#endif
return len;
}
@@ -974,12 +952,8 @@
printk("fast_timer_init()\n");
#ifdef CONFIG_PROC_FS
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,2,0)
if ((fasttimer_proc_entry = create_proc_entry( "fasttimer", 0, 0 )))
fasttimer_proc_entry->read_proc = proc_fasttimer_read;
-#else
- proc_register_dynamic(&proc_root, &fasttimer_proc_entry);
-#endif
#endif /* PROC_FS */
if(request_irq(TIMER_INTR_VECT, timer_trig_interrupt, IRQF_DISABLED,
"fast timer int", NULL))
diff --git a/arch/cris/kernel/profile.c b/arch/cris/kernel/profile.c
index 4cfcae6..aad0a9e 100644
--- a/arch/cris/kernel/profile.c
+++ b/arch/cris/kernel/profile.c
@@ -15,39 +15,47 @@
void
cris_profile_sample(struct pt_regs* regs)
{
- if (!prof_running)
- return;
- if (user_mode(regs))
- *(unsigned int*)sample_buffer_pos = current->pid;
- else
- *(unsigned int*)sample_buffer_pos = 0;
- *(unsigned int*)(sample_buffer_pos + 4) = instruction_pointer(regs);
- sample_buffer_pos += 8;
- if (sample_buffer_pos == sample_buffer + SAMPLE_BUFFER_SIZE)
- sample_buffer_pos = sample_buffer;
+ if (!prof_running)
+ return;
+
+ if (user_mode(regs))
+ *(unsigned int*)sample_buffer_pos = current->pid;
+ else
+ *(unsigned int*)sample_buffer_pos = 0;
+
+ *(unsigned int*)(sample_buffer_pos + 4) = instruction_pointer(regs);
+ sample_buffer_pos += 8;
+
+ if (sample_buffer_pos == sample_buffer + SAMPLE_BUFFER_SIZE)
+ sample_buffer_pos = sample_buffer;
}
static ssize_t
-read_cris_profile(struct file *file, char __user *buf, size_t count, loff_t *ppos)
+read_cris_profile(struct file *file, char __user *buf,
+ size_t count, loff_t *ppos)
{
- unsigned long p = *ppos;
- if (p > SAMPLE_BUFFER_SIZE)
- return 0;
- if (p + count > SAMPLE_BUFFER_SIZE)
- count = SAMPLE_BUFFER_SIZE - p;
- if (copy_to_user(buf, sample_buffer + p,count))
+ unsigned long p = *ppos;
+
+ if (p > SAMPLE_BUFFER_SIZE)
+ return 0;
+
+ if (p + count > SAMPLE_BUFFER_SIZE)
+ count = SAMPLE_BUFFER_SIZE - p;
+ if (copy_to_user(buf, sample_buffer + p,count))
return -EFAULT;
- memset(sample_buffer + p, 0, count);
- *ppos += count;
- return count;
+
+ memset(sample_buffer + p, 0, count);
+ *ppos += count;
+
+ return count;
}
static ssize_t
write_cris_profile(struct file *file, const char __user *buf,
- size_t count, loff_t *ppos)
+ size_t count, loff_t *ppos)
{
- sample_buffer_pos = sample_buffer;
- memset(sample_buffer, 0, SAMPLE_BUFFER_SIZE);
+ sample_buffer_pos = sample_buffer;
+ memset(sample_buffer, 0, SAMPLE_BUFFER_SIZE);
}
static const struct file_operations cris_proc_profile_operations = {
@@ -58,16 +66,23 @@
static int
__init init_cris_profile(void)
{
- struct proc_dir_entry *entry;
- sample_buffer = kmalloc(SAMPLE_BUFFER_SIZE, GFP_KERNEL);
- sample_buffer_pos = sample_buffer;
- entry = create_proc_entry("system_profile", S_IWUSR | S_IRUGO, NULL);
- if (entry) {
- entry->proc_fops = &cris_proc_profile_operations;
- entry->size = SAMPLE_BUFFER_SIZE;
- }
- prof_running = 1;
- return 0;
+ struct proc_dir_entry *entry;
+
+ sample_buffer = kmalloc(SAMPLE_BUFFER_SIZE, GFP_KERNEL);
+ if (!sample_buffer) {
+ return -ENOMEM;
+ }
+
+ sample_buffer_pos = sample_buffer;
+
+ entry = create_proc_entry("system_profile", S_IWUSR | S_IRUGO, NULL);
+ if (entry) {
+ entry->proc_fops = &cris_proc_profile_operations;
+ entry->size = SAMPLE_BUFFER_SIZE;
+ }
+ prof_running = 1;
+
+ return 0;
}
__initcall(init_cris_profile);
diff --git a/arch/frv/Kconfig b/arch/frv/Kconfig
index cea2374..eed6943 100644
--- a/arch/frv/Kconfig
+++ b/arch/frv/Kconfig
@@ -53,6 +53,10 @@
bool
default y
+config ARCH_USES_SLAB_PAGE_STRUCT
+ bool
+ default y
+
mainmenu "Fujitsu FR-V Kernel Configuration"
source "init/Kconfig"
diff --git a/arch/frv/mm/elf-fdpic.c b/arch/frv/mm/elf-fdpic.c
index 9477ccc..cac2c01 100644
--- a/arch/frv/mm/elf-fdpic.c
+++ b/arch/frv/mm/elf-fdpic.c
@@ -64,6 +64,10 @@
if (len > TASK_SIZE)
return -ENOMEM;
+ /* handle MAP_FIXED */
+ if (flags & MAP_FIXED)
+ return addr;
+
/* only honour a hint if we're not going to clobber something doing so */
if (addr) {
addr = PAGE_ALIGN(addr);
diff --git a/arch/h8300/Kconfig b/arch/h8300/Kconfig
index 1734d96..618dbad 100644
--- a/arch/h8300/Kconfig
+++ b/arch/h8300/Kconfig
@@ -49,10 +49,18 @@
bool
default y
+config GENERIC_HARDIRQS
+ bool
+ default y
+
config GENERIC_CALIBRATE_DELAY
bool
default y
+config GENERIC_TIME
+ bool
+ default y
+
config TIME_LOW_RES
bool
default y
diff --git a/arch/h8300/Makefile b/arch/h8300/Makefile
index 40b3f56..b2d896a 100644
--- a/arch/h8300/Makefile
+++ b/arch/h8300/Makefile
@@ -41,7 +41,7 @@
CROSS_COMPILE = h8300-elf-
LIBGCC := $(shell $(CROSS-COMPILE)$(CC) $(CFLAGS) -print-libgcc-file-name)
-head-y := arch/$(ARCH)/platform/$(platform-y)/$(board-y)/crt0_$(model-y).o
+head-y := arch/$(ARCH)/platform/$(PLATFORM)/$(BOARD)/crt0_$(MODEL).o
core-y += arch/$(ARCH)/kernel/ \
arch/$(ARCH)/mm/
diff --git a/arch/h8300/boot/Makefile b/arch/h8300/boot/Makefile
index 65086d9..0bb62e0 100644
--- a/arch/h8300/boot/Makefile
+++ b/arch/h8300/boot/Makefile
@@ -1,12 +1,22 @@
# arch/h8300/boot/Makefile
-targets := vmlinux.srec vmlinux.bin
+targets := vmlinux.srec vmlinux.bin zImage
+subdir- := compressed
OBJCOPYFLAGS_vmlinux.srec := -Osrec
OBJCOPYFLAGS_vmlinux.bin := -Obinary
+OBJCOPYFLAGS_zImage := -O binary -R .note -R .comment -R .stab -R .stabstr -S
$(obj)/vmlinux.srec $(obj)/vmlinux.bin: vmlinux FORCE
$(call if_changed,objcopy)
@echo ' Kernel: $@ is ready'
+$(obj)/zImage: $(obj)/compressed/vmlinux FORCE
+ $(call if_changed,objcopy)
+ @echo 'Kernel: $@ is ready'
+
+$(obj)/compressed/vmlinux: FORCE
+ $(Q)$(MAKE) $(build)=$(obj)/compressed $@
+
CLEAN_FILES += arch/$(ARCH)/vmlinux.bin arch/$(ARCH)/vmlinux.srec
+
diff --git a/arch/h8300/boot/compressed/Makefile b/arch/h8300/boot/compressed/Makefile
new file mode 100644
index 0000000..71aac82
--- /dev/null
+++ b/arch/h8300/boot/compressed/Makefile
@@ -0,0 +1,37 @@
+#
+# linux/arch/sh/boot/compressed/Makefile
+#
+# create a compressed vmlinux image from the original vmlinux
+#
+
+targets := vmlinux vmlinux.bin vmlinux.bin.gz head.o misc.o piggy.o
+EXTRA_AFLAGS := -traditional
+
+OBJECTS = $(obj)/head.o $(obj)/misc.o
+
+#
+# IMAGE_OFFSET is the load offset of the compression loader
+# Assign dummy values if these 2 variables are not defined,
+# in order to suppress error message.
+#
+CONFIG_MEMORY_START ?= 0x00400000
+CONFIG_BOOT_LINK_OFFSET ?= 0x00400000
+IMAGE_OFFSET := $(shell printf "0x%08x" $$[$(CONFIG_MEMORY_START)+$(CONFIG_BOOT_LINK_OFFSET)])
+
+LDFLAGS_vmlinux := -T $(obj)/vmlinux.lds
+
+$(obj)/vmlinux: $(OBJECTS) $(obj)/piggy.o FORCE
+ $(call if_changed,ld)
+ @:
+
+$(obj)/vmlinux.bin: vmlinux FORCE
+ $(call if_changed,objcopy)
+
+$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
+ $(call if_changed,gzip)
+
+LDFLAGS_piggy.o := -r --format binary --oformat elf32-h8300 -T
+OBJCOPYFLAGS := -O binary
+
+$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.gz FORCE
+ $(call if_changed,ld)
diff --git a/arch/h8300/boot/compressed/head.S b/arch/h8300/boot/compressed/head.S
new file mode 100644
index 0000000..b8e90d1
--- /dev/null
+++ b/arch/h8300/boot/compressed/head.S
@@ -0,0 +1,47 @@
+/*
+ * linux/arch/h8300/boot/compressed/head.S
+ *
+ * Copyright (C) 2006 Yoshinori Sato
+ */
+
+.h8300h
+#include <linux/linkage.h>
+
+#define SRAM_START 0xff4000
+
+ .section .text.startup
+ .global startup
+startup:
+ mov.l #SRAM_START+0x8000, sp
+ mov.l #__sbss, er0
+ mov.l #__ebss, er1
+ sub.l er0, er1
+ shlr er1
+ shlr er1
+ sub.l er2, er2
+1:
+ mov.l er2, @er0
+ adds #4, er0
+ dec.l #1, er1
+ bne 1b
+ jsr @_decompress_kernel
+ jmp @0x400000
+
+ .align 9
+fake_headers_as_bzImage:
+ .word 0
+ .ascii "HdrS" ; header signature
+ .word 0x0202 ; header version number (>= 0x0105)
+ ; or else old loadlin-1.5 will fail)
+ .word 0 ; default_switch
+ .word 0 ; SETUPSEG
+ .word 0x1000
+ .word 0 ; pointing to kernel version string
+ .byte 0 ; = 0, old one (LILO, Loadlin,
+ ; 0xTV: T=0 for LILO
+ ; V = version
+ .byte 1 ; Load flags bzImage=1
+ .word 0x8000 ; size to move, when setup is not
+ .long 0x100000 ; 0x100000 = default for big kernel
+ .long 0 ; address of loaded ramdisk image
+ .long 0 ; its size in bytes
diff --git a/arch/h8300/boot/compressed/misc.c b/arch/h8300/boot/compressed/misc.c
new file mode 100644
index 0000000..8450745
--- /dev/null
+++ b/arch/h8300/boot/compressed/misc.c
@@ -0,0 +1,219 @@
+/*
+ * arch/h8300/boot/compressed/misc.c
+ *
+ * This is a collection of several routines from gzip-1.0.3
+ * adapted for Linux.
+ *
+ * malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994
+ *
+ * Adapted for h8300 by Yoshinori Sato 2006
+ */
+
+#include <asm/uaccess.h>
+
+/*
+ * gzip declarations
+ */
+
+#define OF(args) args
+#define STATIC static
+
+#undef memset
+#undef memcpy
+#define memzero(s, n) memset ((s), 0, (n))
+
+typedef unsigned char uch;
+typedef unsigned short ush;
+typedef unsigned long ulg;
+
+#define WSIZE 0x8000 /* Window size must be at least 32k, */
+ /* and a power of two */
+
+static uch *inbuf; /* input buffer */
+static uch window[WSIZE]; /* Sliding window buffer */
+
+static unsigned insize = 0; /* valid bytes in inbuf */
+static unsigned inptr = 0; /* index of next byte to be processed in inbuf */
+static unsigned outcnt = 0; /* bytes in output buffer */
+
+/* gzip flag byte */
+#define ASCII_FLAG 0x01 /* bit 0 set: file probably ASCII text */
+#define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gzip file */
+#define EXTRA_FIELD 0x04 /* bit 2 set: extra field present */
+#define ORIG_NAME 0x08 /* bit 3 set: original file name present */
+#define COMMENT 0x10 /* bit 4 set: file comment present */
+#define ENCRYPTED 0x20 /* bit 5 set: file is encrypted */
+#define RESERVED 0xC0 /* bit 6,7: reserved */
+
+#define get_byte() (inptr < insize ? inbuf[inptr++] : fill_inbuf())
+
+/* Diagnostic functions */
+#ifdef DEBUG
+# define Assert(cond,msg) {if(!(cond)) error(msg);}
+# define Trace(x) fprintf x
+# define Tracev(x) {if (verbose) fprintf x ;}
+# define Tracevv(x) {if (verbose>1) fprintf x ;}
+# define Tracec(c,x) {if (verbose && (c)) fprintf x ;}
+# define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;}
+#else
+# define Assert(cond,msg)
+# define Trace(x)
+# define Tracev(x)
+# define Tracevv(x)
+# define Tracec(c,x)
+# define Tracecv(c,x)
+#endif
+
+static int fill_inbuf(void);
+static void flush_window(void);
+static void error(char *m);
+static void gzip_mark(void **);
+static void gzip_release(void **);
+
+extern char input_data[];
+extern int input_len;
+
+static long bytes_out = 0;
+static uch *output_data;
+static unsigned long output_ptr = 0;
+
+static void *malloc(int size);
+static void free(void *where);
+static void error(char *m);
+static void gzip_mark(void **);
+static void gzip_release(void **);
+
+int puts(const char *);
+
+extern int _text; /* Defined in vmlinux.lds.S */
+extern int _end;
+static unsigned long free_mem_ptr;
+static unsigned long free_mem_end_ptr;
+
+#define HEAP_SIZE 0x10000
+
+#include "../../../../lib/inflate.c"
+
+#define SCR *((volatile unsigned char *)0xffff8a)
+#define TDR *((volatile unsigned char *)0xffff8b)
+#define SSR *((volatile unsigned char *)0xffff8c)
+
+static void *malloc(int size)
+{
+ void *p;
+
+ if (size <0) error("Malloc error");
+ if (free_mem_ptr == 0) error("Memory error");
+
+ free_mem_ptr = (free_mem_ptr + 3) & ~3; /* Align */
+
+ p = (void *)free_mem_ptr;
+ free_mem_ptr += size;
+
+ if (free_mem_ptr >= free_mem_end_ptr)
+ error("Out of memory");
+
+ return p;
+}
+
+static void free(void *where)
+{ /* Don't care */
+}
+
+static void gzip_mark(void **ptr)
+{
+ *ptr = (void *) free_mem_ptr;
+}
+
+static void gzip_release(void **ptr)
+{
+ free_mem_ptr = (long) *ptr;
+}
+
+int puts(const char *s)
+{
+ return 0;
+}
+
+void* memset(void* s, int c, size_t n)
+{
+ int i;
+ char *ss = (char*)s;
+
+ for (i=0;i<n;i++) ss[i] = c;
+ return s;
+}
+
+void* memcpy(void* __dest, __const void* __src,
+ size_t __n)
+{
+ int i;
+ char *d = (char *)__dest, *s = (char *)__src;
+
+ for (i=0;i<__n;i++) d[i] = s[i];
+ return __dest;
+}
+
+/* ===========================================================================
+ * Fill the input buffer. This is called only when the buffer is empty
+ * and at least one byte is really needed.
+ */
+static int fill_inbuf(void)
+{
+ if (insize != 0) {
+ error("ran out of input data");
+ }
+
+ inbuf = input_data;
+ insize = input_len;
+ inptr = 1;
+ return inbuf[0];
+}
+
+/* ===========================================================================
+ * Write the output window window[0..outcnt-1] and update crc and bytes_out.
+ * (Used for the decompressed data only.)
+ */
+static void flush_window(void)
+{
+ ulg c = crc; /* temporary variable */
+ unsigned n;
+ uch *in, *out, ch;
+
+ in = window;
+ out = &output_data[output_ptr];
+ for (n = 0; n < outcnt; n++) {
+ ch = *out++ = *in++;
+ c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
+ }
+ crc = c;
+ bytes_out += (ulg)outcnt;
+ output_ptr += (ulg)outcnt;
+ outcnt = 0;
+}
+
+static void error(char *x)
+{
+ puts("\n\n");
+ puts(x);
+ puts("\n\n -- System halted");
+
+ while(1); /* Halt */
+}
+
+#define STACK_SIZE (4096)
+long user_stack [STACK_SIZE];
+long* stack_start = &user_stack[STACK_SIZE];
+
+void decompress_kernel(void)
+{
+ output_data = 0;
+ output_ptr = (unsigned long)0x400000;
+ free_mem_ptr = (unsigned long)&_end;
+ free_mem_end_ptr = free_mem_ptr + HEAP_SIZE;
+
+ makecrc();
+ puts("Uncompressing Linux... ");
+ gunzip();
+ puts("Ok, booting the kernel.\n");
+}
diff --git a/arch/h8300/kernel/Makefile b/arch/h8300/kernel/Makefile
index 4edbc2e..ccc1a7f 100644
--- a/arch/h8300/kernel/Makefile
+++ b/arch/h8300/kernel/Makefile
@@ -4,10 +4,8 @@
extra-y := vmlinux.lds
-obj-y := process.o traps.o ptrace.o ints.o \
+obj-y := process.o traps.o ptrace.o irq.o \
sys_h8300.o time.o semaphore.o signal.o \
- setup.o gpio.o init_task.o syscalls.o devres.o
-
-devres-y = ../../../kernel/irq/devres.o
+ setup.o gpio.o init_task.o syscalls.o
obj-$(CONFIG_MODULES) += module.o h8300_ksyms.o
diff --git a/arch/h8300/kernel/irq.c b/arch/h8300/kernel/irq.c
new file mode 100644
index 0000000..43d21e9
--- /dev/null
+++ b/arch/h8300/kernel/irq.c
@@ -0,0 +1,211 @@
+/*
+ * linux/arch/h8300/kernel/irq.c
+ *
+ * Copyright 2007 Yoshinori Sato <ysato@users.sourceforge.jp>
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/kernel_stat.h>
+#include <linux/seq_file.h>
+#include <linux/init.h>
+#include <linux/random.h>
+#include <linux/bootmem.h>
+#include <linux/irq.h>
+
+#include <asm/system.h>
+#include <asm/traps.h>
+#include <asm/io.h>
+#include <asm/setup.h>
+#include <asm/errno.h>
+
+/*#define DEBUG*/
+
+extern unsigned long *interrupt_redirect_table;
+extern const int h8300_saved_vectors[];
+extern const unsigned long h8300_trap_table[];
+int h8300_enable_irq_pin(unsigned int irq);
+void h8300_disable_irq_pin(unsigned int irq);
+
+#define CPU_VECTOR ((unsigned long *)0x000000)
+#define ADDR_MASK (0xffffff)
+
+static inline int is_ext_irq(unsigned int irq)
+{
+ return (irq >= EXT_IRQ0 && irq <= (EXT_IRQ0 + EXT_IRQS));
+}
+
+static void h8300_enable_irq(unsigned int irq)
+{
+ if (is_ext_irq(irq))
+ IER_REGS |= 1 << (irq - EXT_IRQ0);
+}
+
+static void h8300_disable_irq(unsigned int irq)
+{
+ if (is_ext_irq(irq))
+ IER_REGS &= ~(1 << (irq - EXT_IRQ0));
+}
+
+static void h8300_end_irq(unsigned int irq)
+{
+}
+
+static unsigned int h8300_startup_irq(unsigned int irq)
+{
+ if (is_ext_irq(irq))
+ return h8300_enable_irq_pin(irq);
+ else
+ return 0;
+}
+
+static void h8300_shutdown_irq(unsigned int irq)
+{
+ if (is_ext_irq(irq))
+ h8300_disable_irq_pin(irq);
+}
+
+/*
+ * h8300 interrupt controler implementation
+ */
+struct irq_chip h8300irq_chip = {
+ .name = "H8300-INTC",
+ .startup = h8300_startup_irq,
+ .shutdown = h8300_shutdown_irq,
+ .enable = h8300_enable_irq,
+ .disable = h8300_disable_irq,
+ .ack = NULL,
+ .end = h8300_end_irq,
+};
+
+void ack_bad_irq(unsigned int irq)
+{
+ printk("unexpected IRQ trap at vector %02x\n", irq);
+}
+
+#if defined(CONFIG_RAMKERNEL)
+static unsigned long __init *get_vector_address(void)
+{
+ unsigned long *rom_vector = CPU_VECTOR;
+ unsigned long base,tmp;
+ int vec_no;
+
+ base = rom_vector[EXT_IRQ0] & ADDR_MASK;
+
+ /* check romvector format */
+ for (vec_no = EXT_IRQ1; vec_no <= EXT_IRQ0+EXT_IRQS; vec_no++) {
+ if ((base+(vec_no - EXT_IRQ0)*4) != (rom_vector[vec_no] & ADDR_MASK))
+ return NULL;
+ }
+
+ /* ramvector base address */
+ base -= EXT_IRQ0*4;
+
+ /* writerble check */
+ tmp = ~(*(volatile unsigned long *)base);
+ (*(volatile unsigned long *)base) = tmp;
+ if ((*(volatile unsigned long *)base) != tmp)
+ return NULL;
+ return (unsigned long *)base;
+}
+
+static void __init setup_vector(void)
+{
+ int i;
+ unsigned long *ramvec,*ramvec_p;
+ const unsigned long *trap_entry;
+ const int *saved_vector;
+
+ ramvec = get_vector_address();
+ if (ramvec == NULL)
+ panic("interrupt vector serup failed.");
+ else
+ printk(KERN_INFO "virtual vector at 0x%08lx\n",(unsigned long)ramvec);
+
+ /* create redirect table */
+ ramvec_p = ramvec;
+ trap_entry = h8300_trap_table;
+ saved_vector = h8300_saved_vectors;
+ for ( i = 0; i < NR_IRQS; i++) {
+ if (i == *saved_vector) {
+ ramvec_p++;
+ saved_vector++;
+ } else {
+ if ( i < NR_TRAPS ) {
+ if (*trap_entry)
+ *ramvec_p = VECTOR(*trap_entry);
+ ramvec_p++;
+ trap_entry++;
+ } else
+ *ramvec_p++ = REDIRECT(interrupt_entry);
+ }
+ }
+ interrupt_redirect_table = ramvec;
+#ifdef DEBUG
+ ramvec_p = ramvec;
+ for (i = 0; i < NR_IRQS; i++) {
+ if ((i % 8) == 0)
+ printk(KERN_DEBUG "\n%p: ",ramvec_p);
+ printk(KERN_DEBUG "%p ",*ramvec_p);
+ ramvec_p++;
+ }
+ printk(KERN_DEBUG "\n");
+#endif
+}
+#else
+#define setup_vector() do { } while(0)
+#endif
+
+void __init init_IRQ(void)
+{
+ int c;
+
+ setup_vector();
+
+ for (c = 0; c < NR_IRQS; c++) {
+ irq_desc[c].status = IRQ_DISABLED;
+ irq_desc[c].action = NULL;
+ irq_desc[c].depth = 1;
+ irq_desc[c].chip = &h8300irq_chip;
+ }
+}
+
+asmlinkage void do_IRQ(int irq)
+{
+ irq_enter();
+ __do_IRQ(irq);
+ irq_exit();
+}
+
+#if defined(CONFIG_PROC_FS)
+int show_interrupts(struct seq_file *p, void *v)
+{
+ int i = *(loff_t *) v, j;
+ struct irqaction * action;
+ unsigned long flags;
+
+ if (i == 0)
+ seq_puts(p, " CPU0");
+
+ if (i < NR_IRQS) {
+ spin_lock_irqsave(&irq_desc[i].lock, flags);
+ action = irq_desc[i].action;
+ if (!action)
+ goto unlock;
+ seq_printf(p, "%3d: ",i);
+ seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]);
+ seq_printf(p, " %14s", irq_desc[i].chip->name);
+ seq_printf(p, "-%-8s", irq_desc[i].name);
+ seq_printf(p, " %s", action->name);
+
+ for (action=action->next; action; action = action->next)
+ seq_printf(p, ", %s", action->name);
+ seq_putc(p, '\n');
+unlock:
+ spin_unlock_irqrestore(&irq_desc[i].lock, flags);
+ }
+ return 0;
+}
+#endif
diff --git a/arch/h8300/kernel/setup.c b/arch/h8300/kernel/setup.c
index 313cd80..b2e86d02 100644
--- a/arch/h8300/kernel/setup.c
+++ b/arch/h8300/kernel/setup.c
@@ -33,10 +33,7 @@
#include <asm/setup.h>
#include <asm/irq.h>
-
-#ifdef CONFIG_BLK_DEV_INITRD
#include <asm/pgtable.h>
-#endif
#if defined(__H8300H__)
#define CPU "H8/300H"
diff --git a/arch/h8300/kernel/time.c b/arch/h8300/kernel/time.c
index d1ef615..3306382 100644
--- a/arch/h8300/kernel/time.c
+++ b/arch/h8300/kernel/time.c
@@ -44,7 +44,7 @@
#ifndef CONFIG_SMP
update_process_times(user_mode(regs));
#endif
- profile_tick(CPU_PROFILING, regs);
+ profile_tick(CPU_PROFILING);
}
void time_init(void)
@@ -66,55 +66,3 @@
platform_timer_setup(timer_interrupt);
}
-
-/*
- * This version of gettimeofday has near microsecond resolution.
- */
-void do_gettimeofday(struct timeval *tv)
-{
- unsigned long flags;
- unsigned long usec, sec;
-
- read_lock_irqsave(&xtime_lock, flags);
- usec = 0;
- sec = xtime.tv_sec;
- usec += (xtime.tv_nsec / 1000);
- read_unlock_irqrestore(&xtime_lock, flags);
-
- while (usec >= 1000000) {
- usec -= 1000000;
- sec++;
- }
-
- tv->tv_sec = sec;
- tv->tv_usec = usec;
-}
-
-EXPORT_SYMBOL(do_gettimeofday);
-
-int do_settimeofday(struct timespec *tv)
-{
- if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC)
- return -EINVAL;
-
- write_lock_irq(&xtime_lock);
- /* This is revolting. We need to set the xtime.tv_usec
- * correctly. However, the value in this location is
- * is value at the last tick.
- * Discover what correction gettimeofday
- * would have done, and then undo it!
- */
- while (tv->tv_nsec < 0) {
- tv->tv_nsec += NSEC_PER_SEC;
- tv->tv_sec--;
- }
-
- xtime.tv_sec = tv->tv_sec;
- xtime.tv_nsec = tv->tv_nsec;
- ntp_clear();
- write_sequnlock_irq(&xtime_lock);
- clock_was_set();
- return 0;
-}
-
-EXPORT_SYMBOL(do_settimeofday);
diff --git a/arch/h8300/mm/kmap.c b/arch/h8300/mm/kmap.c
index 26ab172..5c7af09 100644
--- a/arch/h8300/mm/kmap.c
+++ b/arch/h8300/mm/kmap.c
@@ -24,12 +24,14 @@
#undef DEBUG
+#define VIRT_OFFSET (0x01000000)
+
/*
* Map some physical address range into the kernel address space.
*/
void *__ioremap(unsigned long physaddr, unsigned long size, int cacheflag)
{
- return (void *)physaddr;
+ return (void *)(physaddr + VIRT_OFFSET);
}
/*
diff --git a/arch/h8300/platform/h8300h/Makefile b/arch/h8300/platform/h8300h/Makefile
index 5d42c77..b24ea08 100644
--- a/arch/h8300/platform/h8300h/Makefile
+++ b/arch/h8300/platform/h8300h/Makefile
@@ -4,4 +4,4 @@
# Reuse any files we can from the H8/300H
#
-obj-y := entry.o ints_h8300h.o ptrace_h8300h.o
+obj-y := entry.o irq_pin.o ptrace_h8300h.o
diff --git a/arch/h8300/platform/h8300h/entry.S b/arch/h8300/platform/h8300h/entry.S
index d2dea24..f86ac3b 100644
--- a/arch/h8300/platform/h8300h/entry.S
+++ b/arch/h8300/platform/h8300h/entry.S
@@ -30,12 +30,12 @@
mov.l er0,@-sp
stc ccr,r0l /* check kernel mode */
- orc #0x10,ccr
btst #4,r0l
bne 5f
mov.l sp,@SYMBOL_NAME(sw_usp) /* user mode */
mov.l @sp,er0
+ orc #0x10,ccr
mov.l @SYMBOL_NAME(sw_ksp),sp
sub.l #(LRET-LORIG),sp /* allocate LORIG - LRET */
mov.l er0,@-sp
@@ -165,7 +165,7 @@
dec.l #1,er0
mov.l sp,er1
subs #4,er1 /* adjust ret_pc */
- jsr @SYMBOL_NAME(process_int)
+ jsr @SYMBOL_NAME(do_IRQ)
mov.l @SYMBOL_NAME(irq_stat)+CPUSTAT_SOFTIRQ_PENDING,er0
beq 1f
jsr @SYMBOL_NAME(do_softirq)
diff --git a/arch/h8300/platform/h8300h/generic/Makefile b/arch/h8300/platform/h8300h/generic/Makefile
index b6ea768..32b964a 100644
--- a/arch/h8300/platform/h8300h/generic/Makefile
+++ b/arch/h8300/platform/h8300h/generic/Makefile
@@ -2,5 +2,5 @@
# Makefile for the linux kernel.
#
+extra-y := crt0_$(MODEL).o
obj-y := timer.o
-extra-y = crt0_$(MODEL).o
diff --git a/arch/h8300/platform/h8300h/ints_h8300h.c b/arch/h8300/platform/h8300h/ints_h8300h.c
deleted file mode 100644
index f177711..0000000
--- a/arch/h8300/platform/h8300h/ints_h8300h.c
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- * linux/arch/h8300/platform/h8300h/ints_h8300h.c
- * Interrupt handling CPU variants
- *
- * Yoshinori Sato <ysato@users.sourceforge.jp>
- *
- */
-
-#include <linux/init.h>
-#include <linux/errno.h>
-
-#include <asm/ptrace.h>
-#include <asm/traps.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-#include <asm/gpio.h>
-#include <asm/regs306x.h>
-
-/* saved vector list */
-const int __initdata h8300_saved_vectors[]={
-#if defined(CONFIG_GDB_DEBUG)
- TRAP3_VEC,
-#endif
- -1
-};
-
-/* trap entry table */
-const unsigned long __initdata h8300_trap_table[NR_TRAPS]={
- 0,0,0,0,0,0,0,0,
- (unsigned long)system_call, /* TRAPA #0 */
- 0,0,
- (unsigned long)trace_break, /* TRAPA #3 */
-};
-
-int h8300_enable_irq_pin(unsigned int irq)
-{
- int bitmask;
- if (irq < EXT_IRQ0 || irq > EXT_IRQ5)
- return 0;
-
- /* initialize IRQ pin */
- bitmask = 1 << (irq - EXT_IRQ0);
- switch(irq) {
- case EXT_IRQ0:
- case EXT_IRQ1:
- case EXT_IRQ2:
- case EXT_IRQ3:
- if (H8300_GPIO_RESERVE(H8300_GPIO_P8, bitmask) == 0)
- return -EBUSY;
- H8300_GPIO_DDR(H8300_GPIO_P8, bitmask, H8300_GPIO_INPUT);
- break;
- case EXT_IRQ4:
- case EXT_IRQ5:
- if (H8300_GPIO_RESERVE(H8300_GPIO_P9, bitmask) == 0)
- return -EBUSY;
- H8300_GPIO_DDR(H8300_GPIO_P9, bitmask, H8300_GPIO_INPUT);
- break;
- }
-
- return 0;
-}
-
-void h8300_disable_irq_pin(unsigned int irq)
-{
- int bitmask;
- if (irq < EXT_IRQ0 || irq > EXT_IRQ5)
- return;
-
- /* disable interrupt & release IRQ pin */
- bitmask = 1 << (irq - EXT_IRQ0);
- switch(irq) {
- case EXT_IRQ0:
- case EXT_IRQ1:
- case EXT_IRQ2:
- case EXT_IRQ3:
- *(volatile unsigned char *)IER &= ~bitmask;
- H8300_GPIO_FREE(H8300_GPIO_P8, bitmask);
- break ;
- case EXT_IRQ4:
- case EXT_IRQ5:
- *(volatile unsigned char *)IER &= ~bitmask;
- H8300_GPIO_FREE(H8300_GPIO_P9, bitmask);
- break;
- }
-}
diff --git a/arch/h8300/platform/h8s/entry.S b/arch/h8300/platform/h8s/entry.S
index aeb2e9f..f3d6b8e 100644
--- a/arch/h8300/platform/h8s/entry.S
+++ b/arch/h8300/platform/h8s/entry.S
@@ -31,12 +31,13 @@
mov.l er0,@-sp
stc ccr,r0l /* check kernel mode */
- orc #0x10,ccr
btst #4,r0l
bne 5f
- mov.l sp,@SYMBOL_NAME(sw_usp) /* user mode */
- mov.l @sp,er0
+ /* user mode */
+ mov.l sp,@SYMBOL_NAME(sw_usp)
+ mov.l @sp,er0 /* restore saved er0 */
+ orc #0x10,ccr /* switch kernel stack */
mov.l @SYMBOL_NAME(sw_ksp),sp
sub.l #(LRET-LORIG),sp /* allocate LORIG - LRET */
stm.l er0-er3,@-sp
@@ -55,8 +56,9 @@
mov.l er0,@(LER0-LER3:16,sp) /* copy ER0 */
bra 6f
5:
- mov.l @sp,er0 /* kernel mode */
- subs #2,sp /* dummy ccr */
+ /* kernel mode */
+ mov.l @sp,er0 /* restore saved er0 */
+ subs #2,sp /* set dummy ccr */
stm.l er0-er3,@-sp
mov.w @(LRET-LER3:16,sp),r1 /* copy old ccr */
mov.b r1h,r1l
@@ -94,6 +96,7 @@
mov.l @sp+,er1
add.l #(LRET-LER1),sp /* remove LORIG - LRET */
mov.l sp,@SYMBOL_NAME(sw_ksp)
+ andc #0xef,ccr /* switch to user mode */
mov.l er0,sp
bra 8f
7:
@@ -173,9 +176,6 @@
SYMBOL_NAME_LABEL(system_call)
subs #4,sp /* dummy LVEC */
SAVE_ALL
- mov.w @(LCCR:16,sp),r1
- bset #4,r1l
- ldc r1l,ccr /* restore ccr */
mov.l er0,er4
mov.l #-ENOSYS,er0
mov.l er0,@(LER0:16,sp)
@@ -198,6 +198,7 @@
mov.l @(LER1:16,sp),er0
mov.l @(LER2:16,sp),er1
mov.l @(LER3:16,sp),er2
+ andc #0x7f,ccr
jsr @er4
mov.l er0,@(LER0:16,sp) /* save the return value */
#if defined(CONFIG_SYSCALL_PRINT)
diff --git a/arch/i386/Kconfig b/arch/i386/Kconfig
index a9af760..64ad10f 100644
--- a/arch/i386/Kconfig
+++ b/arch/i386/Kconfig
@@ -79,6 +79,10 @@
bool
default y
+config ARCH_USES_SLAB_PAGE_STRUCT
+ bool
+ default y
+
config DMI
bool
default y
diff --git a/arch/i386/kernel/alternative.c b/arch/i386/kernel/alternative.c
index e5cec66..d8cda14 100644
--- a/arch/i386/kernel/alternative.c
+++ b/arch/i386/kernel/alternative.c
@@ -390,8 +390,8 @@
_text, _etext);
}
free_init_pages("SMP alternatives",
- __pa_symbol(&__smp_locks),
- __pa_symbol(&__smp_locks_end));
+ (unsigned long)__smp_locks,
+ (unsigned long)__smp_locks_end);
} else {
alternatives_smp_module_add(NULL, "core kernel",
__smp_locks, __smp_locks_end,
diff --git a/arch/i386/mm/hugetlbpage.c b/arch/i386/mm/hugetlbpage.c
index 34728e4..6272a4f 100644
--- a/arch/i386/mm/hugetlbpage.c
+++ b/arch/i386/mm/hugetlbpage.c
@@ -367,6 +367,12 @@
if (len > TASK_SIZE)
return -ENOMEM;
+ if (flags & MAP_FIXED) {
+ if (prepare_hugepage_range(addr, len, pgoff))
+ return -EINVAL;
+ return addr;
+ }
+
if (addr) {
addr = ALIGN(addr, HPAGE_SIZE);
vma = find_vma(mm, addr);
diff --git a/arch/i386/mm/init.c b/arch/i386/mm/init.c
index dbe16f6..1a7197e 100644
--- a/arch/i386/mm/init.c
+++ b/arch/i386/mm/init.c
@@ -843,11 +843,10 @@
unsigned long addr;
for (addr = begin; addr < end; addr += PAGE_SIZE) {
- struct page *page = pfn_to_page(addr >> PAGE_SHIFT);
- ClearPageReserved(page);
- init_page_count(page);
- memset(page_address(page), POISON_FREE_INITMEM, PAGE_SIZE);
- __free_page(page);
+ ClearPageReserved(virt_to_page(addr));
+ init_page_count(virt_to_page(addr));
+ memset((void *)addr, POISON_FREE_INITMEM, PAGE_SIZE);
+ free_page(addr);
totalram_pages++;
}
printk(KERN_INFO "Freeing %s: %luk freed\n", what, (end - begin) >> 10);
@@ -856,14 +855,14 @@
void free_initmem(void)
{
free_init_pages("unused kernel memory",
- __pa_symbol(&__init_begin),
- __pa_symbol(&__init_end));
+ (unsigned long)(&__init_begin),
+ (unsigned long)(&__init_end));
}
#ifdef CONFIG_BLK_DEV_INITRD
void free_initrd_mem(unsigned long start, unsigned long end)
{
- free_init_pages("initrd memory", __pa(start), __pa(end));
+ free_init_pages("initrd memory", start, end);
}
#endif
diff --git a/arch/ia64/kernel/sys_ia64.c b/arch/ia64/kernel/sys_ia64.c
index 9ef62a3..2fcaa20 100644
--- a/arch/ia64/kernel/sys_ia64.c
+++ b/arch/ia64/kernel/sys_ia64.c
@@ -33,6 +33,13 @@
if (len > RGN_MAP_LIMIT)
return -ENOMEM;
+ /* handle fixed mapping: prevent overlap with huge pages */
+ if (flags & MAP_FIXED) {
+ if (is_hugepage_only_range(mm, addr, len))
+ return -EINVAL;
+ return addr;
+ }
+
#ifdef CONFIG_HUGETLB_PAGE
if (REGION_NUMBER(addr) == RGN_HPAGE)
addr = 0;
diff --git a/arch/ia64/mm/hugetlbpage.c b/arch/ia64/mm/hugetlbpage.c
index 0c7e94e..c7c90f4 100644
--- a/arch/ia64/mm/hugetlbpage.c
+++ b/arch/ia64/mm/hugetlbpage.c
@@ -148,6 +148,14 @@
return -ENOMEM;
if (len & ~HPAGE_MASK)
return -EINVAL;
+
+ /* Handle MAP_FIXED */
+ if (flags & MAP_FIXED) {
+ if (prepare_hugepage_range(addr, len, pgoff))
+ return -EINVAL;
+ return addr;
+ }
+
/* This code assumes that RGN_HPAGE != 0. */
if ((REGION_NUMBER(addr) != RGN_HPAGE) || (addr & (HPAGE_SIZE - 1)))
addr = HPAGE_REGION_BASE;
diff --git a/arch/ia64/mm/init.c b/arch/ia64/mm/init.c
index 4f36987..2da8411 100644
--- a/arch/ia64/mm/init.c
+++ b/arch/ia64/mm/init.c
@@ -121,7 +121,7 @@
return; /* i-cache is already coherent with d-cache */
if (PageCompound(page)) {
- order = (unsigned long) (page[1].lru.prev);
+ order = compound_order(page);
flush_icache_range(addr, addr + (1UL << order << PAGE_SHIFT));
}
else
diff --git a/arch/m68k/amiga/amiints.c b/arch/m68k/amiga/amiints.c
index 28d95cf..907a553 100644
--- a/arch/m68k/amiga/amiints.c
+++ b/arch/m68k/amiga/amiints.c
@@ -54,7 +54,7 @@
static struct irq_controller amiga_irq_controller = {
.name = "amiga",
- .lock = SPIN_LOCK_UNLOCKED,
+ .lock = __SPIN_LOCK_UNLOCKED(amiga_irq_controller.lock),
.enable = amiga_enable_irq,
.disable = amiga_disable_irq,
};
diff --git a/arch/m68k/amiga/cia.c b/arch/m68k/amiga/cia.c
index 7a20058..c4a4ffd 100644
--- a/arch/m68k/amiga/cia.c
+++ b/arch/m68k/amiga/cia.c
@@ -123,7 +123,7 @@
static struct irq_controller cia_irq_controller = {
.name = "cia",
- .lock = SPIN_LOCK_UNLOCKED,
+ .lock = __SPIN_LOCK_UNLOCKED(cia_irq_controller.lock),
.enable = cia_enable_irq,
.disable = cia_disable_irq,
};
@@ -160,7 +160,7 @@
static struct irq_controller auto_irq_controller = {
.name = "auto",
- .lock = SPIN_LOCK_UNLOCKED,
+ .lock = __SPIN_LOCK_UNLOCKED(auto_irq_controller.lock),
.enable = auto_enable_irq,
.disable = auto_disable_irq,
};
diff --git a/arch/m68k/apollo/dn_ints.c b/arch/m68k/apollo/dn_ints.c
index 4274af1..13bd41be 100644
--- a/arch/m68k/apollo/dn_ints.c
+++ b/arch/m68k/apollo/dn_ints.c
@@ -31,7 +31,7 @@
static struct irq_controller apollo_irq_controller = {
.name = "apollo",
- .lock = SPIN_LOCK_UNLOCKED,
+ .lock = __SPIN_LOCK_UNLOCKED(apollo_irq_controller.lock),
.startup = apollo_irq_startup,
.shutdown = apollo_irq_shutdown,
};
diff --git a/arch/m68k/atari/ataints.c b/arch/m68k/atari/ataints.c
index 7f81264..b85ca22 100644
--- a/arch/m68k/atari/ataints.c
+++ b/arch/m68k/atari/ataints.c
@@ -339,7 +339,7 @@
static struct irq_controller atari_irq_controller = {
.name = "atari",
- .lock = SPIN_LOCK_UNLOCKED,
+ .lock = __SPIN_LOCK_UNLOCKED(atari_irq_controller.lock),
.startup = atari_startup_irq,
.shutdown = atari_shutdown_irq,
.enable = atari_enable_irq,
diff --git a/arch/m68k/atari/atasound.h b/arch/m68k/atari/atasound.h
deleted file mode 100644
index 1362762..0000000
--- a/arch/m68k/atari/atasound.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * Minor numbers for the sound driver.
- *
- * Unfortunately Creative called the codec chip of SB as a DSP. For this
- * reason the /dev/dsp is reserved for digitized audio use. There is a
- * device for true DSP processors but it will be called something else.
- * In v3.0 it's /dev/sndproc but this could be a temporary solution.
- */
-
-#define SND_NDEVS 256 /* Number of supported devices */
-#define SND_DEV_CTL 0 /* Control port /dev/mixer */
-#define SND_DEV_SEQ 1 /* Sequencer output /dev/sequencer (FM
- synthesizer and MIDI output) */
-#define SND_DEV_MIDIN 2 /* Raw midi access */
-#define SND_DEV_DSP 3 /* Digitized voice /dev/dsp */
-#define SND_DEV_AUDIO 4 /* Sparc compatible /dev/audio */
-#define SND_DEV_DSP16 5 /* Like /dev/dsp but 16 bits/sample */
-#define SND_DEV_STATUS 6 /* /dev/sndstat */
-/* #7 not in use now. Was in 2.4. Free for use after v3.0. */
-#define SND_DEV_SEQ2 8 /* /dev/sequencer, level 2 interface */
-#define SND_DEV_SNDPROC 9 /* /dev/sndproc for programmable devices */
-#define SND_DEV_PSS SND_DEV_SNDPROC
-
-#define DSP_DEFAULT_SPEED 8000
-
-#define ON 1
-#define OFF 0
-
-#define MAX_AUDIO_DEV 5
-#define MAX_MIXER_DEV 2
-#define MAX_SYNTH_DEV 3
-#define MAX_MIDI_DEV 6
-#define MAX_TIMER_DEV 3
diff --git a/arch/m68k/kernel/ints.c b/arch/m68k/kernel/ints.c
index b66c97c..60d4d75 100644
--- a/arch/m68k/kernel/ints.c
+++ b/arch/m68k/kernel/ints.c
@@ -59,14 +59,14 @@
static struct irq_controller auto_irq_controller = {
.name = "auto",
- .lock = SPIN_LOCK_UNLOCKED,
+ .lock = __SPIN_LOCK_UNLOCKED(auto_irq_controller.lock),
.startup = m68k_irq_startup,
.shutdown = m68k_irq_shutdown,
};
static struct irq_controller user_irq_controller = {
.name = "user",
- .lock = SPIN_LOCK_UNLOCKED,
+ .lock = __SPIN_LOCK_UNLOCKED(user_irq_controller.lock),
.startup = m68k_irq_startup,
.shutdown = m68k_irq_shutdown,
};
diff --git a/arch/m68k/mac/macints.c b/arch/m68k/mac/macints.c
index f6fcd75..0fc72d8 100644
--- a/arch/m68k/mac/macints.c
+++ b/arch/m68k/mac/macints.c
@@ -219,7 +219,7 @@
static struct irq_controller mac_irq_controller = {
.name = "mac",
- .lock = SPIN_LOCK_UNLOCKED,
+ .lock = __SPIN_LOCK_UNLOCKED(mac_irq_controller.lock),
.enable = mac_enable_irq,
.disable = mac_disable_irq,
};
diff --git a/arch/m68k/q40/q40ints.c b/arch/m68k/q40/q40ints.c
index 31cc07d..2fb25ae 100644
--- a/arch/m68k/q40/q40ints.c
+++ b/arch/m68k/q40/q40ints.c
@@ -59,7 +59,7 @@
static struct irq_controller q40_irq_controller = {
.name = "q40",
- .lock = SPIN_LOCK_UNLOCKED,
+ .lock = __SPIN_LOCK_UNLOCKED(q40_irq_controller.lock),
.startup = q40_irq_startup,
.shutdown = q40_irq_shutdown,
.enable = q40_enable_irq,
diff --git a/arch/m68k/sun3/sun3ints.c b/arch/m68k/sun3/sun3ints.c
index 4232a2c..50df34b 100644
--- a/arch/m68k/sun3/sun3ints.c
+++ b/arch/m68k/sun3/sun3ints.c
@@ -90,7 +90,7 @@
static struct irq_controller sun3_irq_controller = {
.name = "sun3",
- .lock = SPIN_LOCK_UNLOCKED,
+ .lock = __SPIN_LOCK_UNLOCKED(sun3_irq_controller.lock),
.startup = m68k_irq_startup,
.shutdown = m68k_irq_shutdown,
.enable = sun3_enable_irq,
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 130d825..7441a2c 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -1042,6 +1042,9 @@
select SYS_SUPPORTS_APM_EMULATION
select SYS_SUPPORTS_KGDB
+config SERIAL_RM9000
+ bool
+
config PNX8550
bool
select SOC_PNX8550
diff --git a/arch/mips/pmc-sierra/msp71xx/msp_serial.c b/arch/mips/pmc-sierra/msp71xx/msp_serial.c
new file mode 100644
index 0000000..c41b53f
--- /dev/null
+++ b/arch/mips/pmc-sierra/msp71xx/msp_serial.c
@@ -0,0 +1,165 @@
+/*
+ * The setup file for serial related hardware on PMC-Sierra MSP processors.
+ *
+ * Copyright 2005 PMC-Sierra, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+#include <linux/serial_reg.h>
+
+#include <asm/bootinfo.h>
+#include <asm/io.h>
+#include <asm/processor.h>
+#include <asm/serial.h>
+
+#include <msp_prom.h>
+#include <msp_int.h>
+#include <msp_regs.h>
+
+#ifdef CONFIG_KGDB
+/*
+ * kgdb uses serial port 1 so the console can remain on port 0.
+ * To use port 0 change the definition to read as follows:
+ * #define DEBUG_PORT_BASE KSEG1ADDR(MSP_UART0_BASE)
+ */
+#define DEBUG_PORT_BASE KSEG1ADDR(MSP_UART1_BASE)
+
+int putDebugChar(char c)
+{
+ volatile uint32_t *uart = (volatile uint32_t *)DEBUG_PORT_BASE;
+ uint32_t val = (uint32_t)c;
+
+ local_irq_disable();
+ while( !(uart[5] & 0x20) ); /* Wait for TXRDY */
+ uart[0] = val;
+ while( !(uart[5] & 0x20) ); /* Wait for TXRDY */
+ local_irq_enable();
+
+ return 1;
+}
+
+char getDebugChar(void)
+{
+ volatile uint32_t *uart = (volatile uint32_t *)DEBUG_PORT_BASE;
+ uint32_t val;
+
+ while( !(uart[5] & 0x01) ); /* Wait for RXRDY */
+ val = uart[0];
+
+ return (char)val;
+}
+
+void initDebugPort(unsigned int uartclk, unsigned int baudrate)
+{
+ unsigned int baud_divisor = (uartclk + 8 * baudrate)/(16 * baudrate);
+
+ /* Enable FIFOs */
+ writeb(UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR |
+ UART_FCR_CLEAR_XMIT | UART_FCR_TRIGGER_4,
+ (char *)DEBUG_PORT_BASE + (UART_FCR * 4));
+
+ /* Select brtc divisor */
+ writeb(UART_LCR_DLAB, (char *)DEBUG_PORT_BASE + (UART_LCR * 4));
+
+ /* Store divisor lsb */
+ writeb(baud_divisor, (char *)DEBUG_PORT_BASE + (UART_TX * 4));
+
+ /* Store divisor msb */
+ writeb(baud_divisor >> 8, (char *)DEBUG_PORT_BASE + (UART_IER * 4));
+
+ /* Set 8N1 mode */
+ writeb(UART_LCR_WLEN8, (char *)DEBUG_PORT_BASE + (UART_LCR * 4));
+
+ /* Disable flow control */
+ writeb(0, (char *)DEBUG_PORT_BASE + (UART_MCR * 4));
+
+ /* Disable receive interrupt(!) */
+ writeb(0, (char *)DEBUG_PORT_BASE + (UART_IER * 4));
+}
+#endif
+
+void __init msp_serial_setup(void)
+{
+ char *s;
+ char *endp;
+ struct uart_port up;
+ unsigned int uartclk;
+
+ memset(&up, 0, sizeof(up));
+
+ /* Check if clock was specified in environment */
+ s = prom_getenv("uartfreqhz");
+ if(!(s && *s && (uartclk = simple_strtoul(s, &endp, 10)) && *endp == 0))
+ uartclk = MSP_BASE_BAUD;
+ ppfinit("UART clock set to %d\n", uartclk);
+
+ /* Initialize first serial port */
+ up.mapbase = MSP_UART0_BASE;
+ up.membase = ioremap_nocache(up.mapbase,MSP_UART_REG_LEN);
+ up.irq = MSP_INT_UART0;
+ up.uartclk = uartclk;
+ up.regshift = 2;
+ up.iotype = UPIO_DWAPB; /* UPIO_MEM like */
+ up.flags = STD_COM_FLAGS;
+ up.type = PORT_16550A;
+ up.line = 0;
+ up.private_data = (void*)UART0_STATUS_REG;
+ if (early_serial_setup(&up))
+ printk(KERN_ERR "Early serial init of port 0 failed\n");
+
+ /* Initialize the second serial port, if one exists */
+ switch (mips_machtype) {
+ case MACH_MSP4200_EVAL:
+ case MACH_MSP4200_GW:
+ case MACH_MSP4200_FPGA:
+ case MACH_MSP7120_EVAL:
+ case MACH_MSP7120_GW:
+ case MACH_MSP7120_FPGA:
+ /* Enable UART1 on MSP4200 and MSP7120 */
+ *GPIO_CFG2_REG = 0x00002299;
+
+#ifdef CONFIG_KGDB
+ /* Initialize UART1 for kgdb since PMON doesn't */
+ if( DEBUG_PORT_BASE == KSEG1ADDR(MSP_UART1_BASE) ) {
+ if( mips_machtype == MACH_MSP4200_FPGA
+ || mips_machtype == MACH_MSP7120_FPGA )
+ initDebugPort(uartclk,19200);
+ else
+ initDebugPort(uartclk,57600);
+ }
+#endif
+ break;
+
+ default:
+ return; /* No second serial port, good-bye. */
+ }
+
+ up.mapbase = MSP_UART1_BASE;
+ up.membase = ioremap_nocache(up.mapbase,MSP_UART_REG_LEN);
+ up.irq = MSP_INT_UART1;
+ up.line = 1;
+ up.private_data = (void*)UART1_STATUS_REG;
+ if (early_serial_setup(&up))
+ printk(KERN_ERR "Early serial init of port 1 failed\n");
+}
diff --git a/arch/parisc/kernel/sys_parisc.c b/arch/parisc/kernel/sys_parisc.c
index 512642d..6fed080 100644
--- a/arch/parisc/kernel/sys_parisc.c
+++ b/arch/parisc/kernel/sys_parisc.c
@@ -106,6 +106,11 @@
{
if (len > TASK_SIZE)
return -ENOMEM;
+ /* Might want to check for cache aliasing issues for MAP_FIXED case
+ * like ARM or MIPS ??? --BenH.
+ */
+ if (flags & MAP_FIXED)
+ return addr;
if (!addr)
addr = TASK_UNMAPPED_BASE;
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index a54a9a2e..8de5f9f 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -117,6 +117,19 @@
default y
depends on BUG
+#
+# Powerpc uses the slab allocator to manage its ptes and the
+# page structs of ptes are used for splitting the page table
+# lock for configurations supporting more than SPLIT_PTLOCK_CPUS.
+#
+# In that special configuration the page structs of slabs are modified.
+# This setting disables the selection of SLUB as a slab allocator.
+#
+config ARCH_USES_SLAB_PAGE_STRUCT
+ bool
+ default y
+ depends on SPLIT_PTLOCK_CPUS <= NR_CPUS
+
config DEFAULT_UIMAGE
bool
help
diff --git a/arch/powerpc/kernel/legacy_serial.c b/arch/powerpc/kernel/legacy_serial.c
index 63dd2c3..ae4836e 100644
--- a/arch/powerpc/kernel/legacy_serial.c
+++ b/arch/powerpc/kernel/legacy_serial.c
@@ -115,7 +115,8 @@
{
u64 addr;
const u32 *addrp;
- upf_t flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ;
+ upf_t flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ
+ | UPF_FIXED_PORT;
struct device_node *tsi = of_get_parent(np);
/* We only support ports that have a clock frequency properly
diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c
index 8508f97..1f07f70 100644
--- a/arch/powerpc/mm/hugetlbpage.c
+++ b/arch/powerpc/mm/hugetlbpage.c
@@ -566,6 +566,13 @@
if (len > TASK_SIZE)
return -ENOMEM;
+ /* handle fixed mapping: prevent overlap with huge pages */
+ if (flags & MAP_FIXED) {
+ if (is_hugepage_only_range(mm, addr, len))
+ return -EINVAL;
+ return addr;
+ }
+
if (addr) {
addr = PAGE_ALIGN(addr);
vma = find_vma(mm, addr);
@@ -641,6 +648,13 @@
if (len > TASK_SIZE)
return -ENOMEM;
+ /* handle fixed mapping: prevent overlap with huge pages */
+ if (flags & MAP_FIXED) {
+ if (is_hugepage_only_range(mm, addr, len))
+ return -EINVAL;
+ return addr;
+ }
+
/* dont allow allocations above current base */
if (mm->free_area_cache > base)
mm->free_area_cache = base;
@@ -823,6 +837,13 @@
/* Paranoia, caller should have dealt with this */
BUG_ON((addr + len) < addr);
+ /* Handle MAP_FIXED */
+ if (flags & MAP_FIXED) {
+ if (prepare_hugepage_range(addr, len, pgoff))
+ return -EINVAL;
+ return addr;
+ }
+
if (test_thread_flag(TIF_32BIT)) {
curareas = current->mm->context.low_htlb_areas;
@@ -1057,8 +1078,7 @@
huge_pgtable_cache = kmem_cache_create("hugepte_cache",
HUGEPTE_TABLE_SIZE,
HUGEPTE_TABLE_SIZE,
- SLAB_HWCACHE_ALIGN |
- SLAB_MUST_HWCACHE_ALIGN,
+ 0,
zero_ctor, NULL);
if (! huge_pgtable_cache)
panic("hugetlbpage_init(): could not create hugepte cache\n");
diff --git a/arch/powerpc/mm/init_64.c b/arch/powerpc/mm/init_64.c
index d12a87e..4416d51 100644
--- a/arch/powerpc/mm/init_64.c
+++ b/arch/powerpc/mm/init_64.c
@@ -183,8 +183,7 @@
"for size: %08x...\n", name, i, size);
pgtable_cache[i] = kmem_cache_create(name,
size, size,
- SLAB_HWCACHE_ALIGN |
- SLAB_MUST_HWCACHE_ALIGN,
+ 0,
zero_ctor,
NULL);
if (! pgtable_cache[i])
diff --git a/arch/powerpc/platforms/cell/spufs/inode.c b/arch/powerpc/platforms/cell/spufs/inode.c
index 13e4f70..a93f328 100644
--- a/arch/powerpc/platforms/cell/spufs/inode.c
+++ b/arch/powerpc/platforms/cell/spufs/inode.c
@@ -71,8 +71,7 @@
{
struct spufs_inode_info *ei = p;
- if ((flags & (SLAB_CTOR_VERIFY|SLAB_CTOR_CONSTRUCTOR)) ==
- SLAB_CTOR_CONSTRUCTOR) {
+ if (flags & SLAB_CTOR_CONSTRUCTOR) {
inode_init_once(&ei->vfs_inode);
}
}
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index e6ec418..1a84719 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -49,6 +49,9 @@
config NO_IOMEM
def_bool y
+config NO_DMA
+ def_bool y
+
mainmenu "Linux Kernel Configuration"
config S390
diff --git a/arch/sparc64/Kconfig b/arch/sparc64/Kconfig
index be9e10b..ad8d6b2 100644
--- a/arch/sparc64/Kconfig
+++ b/arch/sparc64/Kconfig
@@ -34,6 +34,10 @@
bool
default y
+config QUICKLIST
+ bool
+ default y
+
config STACKTRACE_SUPPORT
bool
default y
diff --git a/arch/sparc64/mm/hugetlbpage.c b/arch/sparc64/mm/hugetlbpage.c
index 00677b5..e224a94 100644
--- a/arch/sparc64/mm/hugetlbpage.c
+++ b/arch/sparc64/mm/hugetlbpage.c
@@ -175,6 +175,12 @@
if (len > task_size)
return -ENOMEM;
+ if (flags & MAP_FIXED) {
+ if (prepare_hugepage_range(addr, len, pgoff))
+ return -EINVAL;
+ return addr;
+ }
+
if (addr) {
addr = ALIGN(addr, HPAGE_SIZE);
vma = find_vma(mm, addr);
diff --git a/arch/sparc64/mm/init.c b/arch/sparc64/mm/init.c
index cafadcb..d7004ea 100644
--- a/arch/sparc64/mm/init.c
+++ b/arch/sparc64/mm/init.c
@@ -164,30 +164,6 @@
int bigkernel = 0;
-struct kmem_cache *pgtable_cache __read_mostly;
-
-static void zero_ctor(void *addr, struct kmem_cache *cache, unsigned long flags)
-{
- clear_page(addr);
-}
-
-extern void tsb_cache_init(void);
-
-void pgtable_cache_init(void)
-{
- pgtable_cache = kmem_cache_create("pgtable_cache",
- PAGE_SIZE, PAGE_SIZE,
- SLAB_HWCACHE_ALIGN |
- SLAB_MUST_HWCACHE_ALIGN,
- zero_ctor,
- NULL);
- if (!pgtable_cache) {
- prom_printf("Could not create pgtable_cache\n");
- prom_halt();
- }
- tsb_cache_init();
-}
-
#ifdef CONFIG_DEBUG_DCFLUSH
atomic_t dcpage_flushes = ATOMIC_INIT(0);
#ifdef CONFIG_SMP
diff --git a/arch/sparc64/mm/tsb.c b/arch/sparc64/mm/tsb.c
index 236d02f..8eb8a7c 100644
--- a/arch/sparc64/mm/tsb.c
+++ b/arch/sparc64/mm/tsb.c
@@ -252,7 +252,7 @@
"tsb_1MB",
};
-void __init tsb_cache_init(void)
+void __init pgtable_cache_init(void)
{
unsigned long i;
@@ -262,8 +262,7 @@
tsb_caches[i] = kmem_cache_create(name,
size, size,
- SLAB_HWCACHE_ALIGN |
- SLAB_MUST_HWCACHE_ALIGN,
+ 0,
NULL, NULL);
if (!tsb_caches[i]) {
prom_printf("Could not create %s cache\n", name);
diff --git a/arch/um/drivers/chan_kern.c b/arch/um/drivers/chan_kern.c
index 9fdfad6..3aa3516 100644
--- a/arch/um/drivers/chan_kern.c
+++ b/arch/um/drivers/chan_kern.c
@@ -12,7 +12,6 @@
#include <linux/tty_flip.h>
#include <asm/irq.h>
#include "chan_kern.h"
-#include "user_util.h"
#include "kern.h"
#include "irq_user.h"
#include "sigio.h"
diff --git a/arch/um/drivers/chan_user.c b/arch/um/drivers/chan_user.c
index 0cad354..13f0bf8 100644
--- a/arch/um/drivers/chan_user.c
+++ b/arch/um/drivers/chan_user.c
@@ -14,7 +14,6 @@
#include <sys/ioctl.h>
#include <sys/socket.h>
#include "kern_util.h"
-#include "user_util.h"
#include "chan_user.h"
#include "user.h"
#include "os.h"
@@ -158,7 +157,7 @@
*/
err = run_helper_thread(winch_thread, &data, CLONE_FILES, &stack, 0);
if(err < 0){
- printk("fork of winch_thread failed - errno = %d\n", errno);
+ printk("fork of winch_thread failed - errno = %d\n", -err);
goto out_close;
}
@@ -204,14 +203,3 @@
}
}
}
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
diff --git a/arch/um/drivers/cow_sys.h b/arch/um/drivers/cow_sys.h
index c6a3084..1545384 100644
--- a/arch/um/drivers/cow_sys.h
+++ b/arch/um/drivers/cow_sys.h
@@ -2,14 +2,13 @@
#define __COW_SYS_H__
#include "kern_util.h"
-#include "user_util.h"
#include "os.h"
#include "user.h"
#include "um_malloc.h"
static inline void *cow_malloc(int size)
{
- return(um_kmalloc(size));
+ return um_kmalloc(size);
}
static inline void cow_free(void *ptr)
@@ -21,29 +20,22 @@
static inline char *cow_strdup(char *str)
{
- return(uml_strdup(str));
+ return uml_strdup(str);
}
static inline int cow_seek_file(int fd, __u64 offset)
{
- return(os_seek_file(fd, offset));
+ return os_seek_file(fd, offset);
}
static inline int cow_file_size(char *file, unsigned long long *size_out)
{
- return(os_file_size(file, size_out));
+ return os_file_size(file, size_out);
}
static inline int cow_write_file(int fd, void *buf, int size)
{
- return(os_write_file(fd, buf, size));
+ return os_write_file(fd, buf, size);
}
#endif
-
-/*
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
diff --git a/arch/um/drivers/daemon_user.c b/arch/um/drivers/daemon_user.c
index 021b82c..b869e38 100644
--- a/arch/um/drivers/daemon_user.c
+++ b/arch/um/drivers/daemon_user.c
@@ -14,7 +14,6 @@
#include "net_user.h"
#include "daemon.h"
#include "kern_util.h"
-#include "user_util.h"
#include "user.h"
#include "os.h"
#include "um_malloc.h"
@@ -39,11 +38,11 @@
sun = um_kmalloc(sizeof(struct sockaddr_un));
if(sun == NULL){
printk("new_addr: allocation of sockaddr_un failed\n");
- return(NULL);
+ return NULL;
}
sun->sun_family = AF_UNIX;
memcpy(sun->sun_path, name, len);
- return(sun);
+ return sun;
}
static int connect_to_switch(struct daemon_data *pri)
@@ -112,7 +111,7 @@
}
pri->data_addr = sun;
- return(fd);
+ return fd;
out_free:
kfree(sun);
@@ -120,10 +119,10 @@
os_close_file(fd);
out:
os_close_file(pri->control);
- return(err);
+ return err;
}
-static void daemon_user_init(void *data, void *dev)
+static int daemon_user_init(void *data, void *dev)
{
struct daemon_data *pri = data;
struct timeval tv;
@@ -146,13 +145,16 @@
if(pri->fd < 0){
kfree(pri->local_addr);
pri->local_addr = NULL;
+ return pri->fd;
}
+
+ return 0;
}
static int daemon_open(void *data)
{
struct daemon_data *pri = data;
- return(pri->fd);
+ return pri->fd;
}
static void daemon_remove(void *data)
@@ -176,12 +178,12 @@
{
struct sockaddr_un *data_addr = pri->data_addr;
- return(net_sendto(fd, buf, len, data_addr, sizeof(*data_addr)));
+ return net_sendto(fd, buf, len, data_addr, sizeof(*data_addr));
}
static int daemon_set_mtu(int mtu, void *data)
{
- return(mtu);
+ return mtu;
}
const struct net_user_info daemon_user_info = {
@@ -194,14 +196,3 @@
.delete_address = NULL,
.max_packet = MAX_PACKET - ETH_HEADER_OTHER
};
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
diff --git a/arch/um/drivers/fd.c b/arch/um/drivers/fd.c
index 218aa0e..7f083ec 100644
--- a/arch/um/drivers/fd.c
+++ b/arch/um/drivers/fd.c
@@ -9,7 +9,6 @@
#include <termios.h>
#include <errno.h>
#include "user.h"
-#include "user_util.h"
#include "chan_user.h"
#include "os.h"
#include "um_malloc.h"
diff --git a/arch/um/drivers/harddog_user.c b/arch/um/drivers/harddog_user.c
index c495ecf..5eeecf89 100644
--- a/arch/um/drivers/harddog_user.c
+++ b/arch/um/drivers/harddog_user.c
@@ -6,7 +6,6 @@
#include <stdio.h>
#include <unistd.h>
#include <errno.h>
-#include "user_util.h"
#include "user.h"
#include "mconsole.h"
#include "os.h"
diff --git a/arch/um/drivers/line.c b/arch/um/drivers/line.c
index f75d7b0..ced9910 100644
--- a/arch/um/drivers/line.c
+++ b/arch/um/drivers/line.c
@@ -13,7 +13,6 @@
#include "irq_user.h"
#include "line.h"
#include "kern.h"
-#include "user_util.h"
#include "kern_util.h"
#include "os.h"
#include "irq_kern.h"
diff --git a/arch/um/drivers/mcast_user.c b/arch/um/drivers/mcast_user.c
index b827e82..d319db1 100644
--- a/arch/um/drivers/mcast_user.c
+++ b/arch/um/drivers/mcast_user.c
@@ -20,7 +20,6 @@
#include "net_user.h"
#include "mcast.h"
#include "kern_util.h"
-#include "user_util.h"
#include "user.h"
#include "os.h"
#include "um_malloc.h"
@@ -34,20 +33,21 @@
sin = um_kmalloc(sizeof(struct sockaddr_in));
if(sin == NULL){
printk("new_addr: allocation of sockaddr_in failed\n");
- return(NULL);
+ return NULL;
}
sin->sin_family = AF_INET;
sin->sin_addr.s_addr = in_aton(addr);
sin->sin_port = htons(port);
- return(sin);
+ return sin;
}
-static void mcast_user_init(void *data, void *dev)
+static int mcast_user_init(void *data, void *dev)
{
struct mcast_data *pri = data;
pri->mcast_addr = new_addr(pri->addr, pri->port);
pri->dev = dev;
+ return 0;
}
static void mcast_remove(void *data)
@@ -107,8 +107,8 @@
err = -errno;
printk("mcast_open : data bind failed, errno = %d\n", errno);
goto out_close;
- }
-
+ }
+
/* subscribe to the multicast group */
mreq.imr_multiaddr.s_addr = sin->sin_addr.s_addr;
mreq.imr_interface.s_addr = 0;
@@ -153,12 +153,12 @@
{
struct sockaddr_in *data_addr = pri->mcast_addr;
- return(net_sendto(fd, buf, len, data_addr, sizeof(*data_addr)));
+ return net_sendto(fd, buf, len, data_addr, sizeof(*data_addr));
}
static int mcast_set_mtu(int mtu, void *data)
{
- return(mtu);
+ return mtu;
}
const struct net_user_info mcast_user_info = {
diff --git a/arch/um/drivers/mconsole_kern.c b/arch/um/drivers/mconsole_kern.c
index 65ad293..542c9ef 100644
--- a/arch/um/drivers/mconsole_kern.c
+++ b/arch/um/drivers/mconsole_kern.c
@@ -25,7 +25,6 @@
#include "linux/console.h"
#include "asm/irq.h"
#include "asm/uaccess.h"
-#include "user_util.h"
#include "kern_util.h"
#include "kern.h"
#include "mconsole.h"
diff --git a/arch/um/drivers/mconsole_user.c b/arch/um/drivers/mconsole_user.c
index f02634f..62e5ad6 100644
--- a/arch/um/drivers/mconsole_user.c
+++ b/arch/um/drivers/mconsole_user.c
@@ -17,7 +17,6 @@
#include "sysdep/ptrace.h"
#include "mconsole.h"
#include "os.h"
-#include "user_util.h"
static struct mconsole_command commands[] = {
/* With uts namespaces, uts information becomes process-specific, so
diff --git a/arch/um/drivers/mmapper_kern.c b/arch/um/drivers/mmapper_kern.c
index df3516e..e41a08f0 100644
--- a/arch/um/drivers/mmapper_kern.c
+++ b/arch/um/drivers/mmapper_kern.c
@@ -15,7 +15,6 @@
#include <linux/miscdevice.h>
#include <asm/uaccess.h>
#include "mem_user.h"
-#include "user_util.h"
/* These are set in mmapper_init, which is called at boot time */
static unsigned long mmapper_size;
diff --git a/arch/um/drivers/net_kern.c b/arch/um/drivers/net_kern.c
index 8593037..baac4ad 100644
--- a/arch/um/drivers/net_kern.c
+++ b/arch/um/drivers/net_kern.c
@@ -21,7 +21,6 @@
#include "linux/ethtool.h"
#include "linux/platform_device.h"
#include "asm/uaccess.h"
-#include "user_util.h"
#include "kern_util.h"
#include "net_kern.h"
#include "net_user.h"
@@ -284,7 +283,7 @@
#endif
}
-static void setup_etheraddr(char *str, unsigned char *addr)
+static void setup_etheraddr(char *str, unsigned char *addr, char *name)
{
char *end;
int i;
@@ -303,15 +302,32 @@
}
str = end + 1;
}
- if(addr[0] & 1){
+ if (is_multicast_ether_addr(addr)) {
printk(KERN_ERR
- "Attempt to assign a broadcast ethernet address to a "
+ "Attempt to assign a multicast ethernet address to a "
"device disallowed\n");
goto random;
}
+ if (!is_valid_ether_addr(addr)) {
+ printk(KERN_ERR
+ "Attempt to assign an invalid ethernet address to a "
+ "device disallowed\n");
+ goto random;
+ }
+ if (!is_local_ether_addr(addr)) {
+ printk(KERN_WARNING
+ "Warning: attempt to assign a globally valid ethernet address to a "
+ "device\n");
+ printk(KERN_WARNING "You should better enable the 2nd rightmost bit "
+ "in the first byte of the MAC, i.e. "
+ "%02x:%02x:%02x:%02x:%02x:%02x\n",
+ addr[0] | 0x02, addr[1], addr[2], addr[3], addr[4], addr[5]);
+ }
return;
random:
+ printk(KERN_INFO
+ "Choosing a random ethernet address for device %s\n", name);
random_ether_addr(addr);
}
@@ -325,31 +341,53 @@
};
static int driver_registered;
-static int eth_configure(int n, void *init, char *mac,
- struct transport *transport)
+static void net_device_release(struct device *dev)
+{
+ struct uml_net *device = dev->driver_data;
+ struct net_device *netdev = device->dev;
+ struct uml_net_private *lp = netdev->priv;
+
+ if(lp->remove != NULL)
+ (*lp->remove)(&lp->user);
+ list_del(&device->list);
+ kfree(device);
+ free_netdev(netdev);
+}
+
+static void eth_configure(int n, void *init, char *mac,
+ struct transport *transport)
{
struct uml_net *device;
struct net_device *dev;
struct uml_net_private *lp;
- int save, err, size;
+ int err, size;
- size = transport->private_size + sizeof(struct uml_net_private) +
- sizeof(((struct uml_net_private *) 0)->user);
+ size = transport->private_size + sizeof(struct uml_net_private);
device = kzalloc(sizeof(*device), GFP_KERNEL);
if (device == NULL) {
- printk(KERN_ERR "eth_configure failed to allocate uml_net\n");
- return(1);
+ printk(KERN_ERR "eth_configure failed to allocate struct "
+ "uml_net\n");
+ return;
+ }
+
+ dev = alloc_etherdev(size);
+ if (dev == NULL) {
+ printk(KERN_ERR "eth_configure: failed to allocate struct "
+ "net_device for eth%d\n", n);
+ goto out_free_device;
}
INIT_LIST_HEAD(&device->list);
device->index = n;
- spin_lock(&devices_lock);
- list_add(&device->list, &devices);
- spin_unlock(&devices_lock);
+ /* If this name ends up conflicting with an existing registered
+ * netdevice, that is OK, register_netdev{,ice}() will notice this
+ * and fail.
+ */
+ snprintf(dev->name, sizeof(dev->name), "eth%d", n);
- setup_etheraddr(mac, device->mac);
+ setup_etheraddr(mac, device->mac, dev->name);
printk(KERN_INFO "Netdevice %d ", n);
printk("(%02x:%02x:%02x:%02x:%02x:%02x) ",
@@ -357,11 +395,6 @@
device->mac[2], device->mac[3],
device->mac[4], device->mac[5]);
printk(": ");
- dev = alloc_etherdev(size);
- if (dev == NULL) {
- printk(KERN_ERR "eth_configure: failed to allocate device\n");
- return 1;
- }
lp = dev->priv;
/* This points to the transport private data. It's still clear, but we
@@ -376,18 +409,45 @@
}
device->pdev.id = n;
device->pdev.name = DRIVER_NAME;
- platform_device_register(&device->pdev);
+ device->pdev.dev.release = net_device_release;
+ device->pdev.dev.driver_data = device;
+ if(platform_device_register(&device->pdev))
+ goto out_free_netdev;
SET_NETDEV_DEV(dev,&device->pdev.dev);
- /* If this name ends up conflicting with an existing registered
- * netdevice, that is OK, register_netdev{,ice}() will notice this
- * and fail.
- */
- snprintf(dev->name, sizeof(dev->name), "eth%d", n);
device->dev = dev;
+ /*
+ * These just fill in a data structure, so there's no failure
+ * to be worried about.
+ */
(*transport->kern->init)(dev, init);
+ *lp = ((struct uml_net_private)
+ { .list = LIST_HEAD_INIT(lp->list),
+ .dev = dev,
+ .fd = -1,
+ .mac = { 0xfe, 0xfd, 0x0, 0x0, 0x0, 0x0},
+ .protocol = transport->kern->protocol,
+ .open = transport->user->open,
+ .close = transport->user->close,
+ .remove = transport->user->remove,
+ .read = transport->kern->read,
+ .write = transport->kern->write,
+ .add_address = transport->user->add_address,
+ .delete_address = transport->user->delete_address,
+ .set_mtu = transport->user->set_mtu });
+
+ init_timer(&lp->tl);
+ spin_lock_init(&lp->lock);
+ lp->tl.function = uml_net_user_timer_expire;
+ memcpy(lp->mac, device->mac, sizeof(lp->mac));
+
+ if ((transport->user->init != NULL) &&
+ ((*transport->user->init)(&lp->user, dev) != 0))
+ goto out_unregister;
+
+ set_ether_mac(dev, device->mac);
dev->mtu = transport->user->max_packet;
dev->open = uml_net_open;
dev->hard_start_xmit = uml_net_start_xmit;
@@ -404,46 +464,24 @@
rtnl_lock();
err = register_netdevice(dev);
rtnl_unlock();
- if (err) {
- device->dev = NULL;
- /* XXX: should we call ->remove() here? */
- free_netdev(dev);
- return 1;
- }
+ if (err)
+ goto out_undo_user_init;
- /* lp.user is the first four bytes of the transport data, which
- * has already been initialized. This structure assignment will
- * overwrite that, so we make sure that .user gets overwritten with
- * what it already has.
- */
- save = lp->user[0];
- *lp = ((struct uml_net_private)
- { .list = LIST_HEAD_INIT(lp->list),
- .dev = dev,
- .fd = -1,
- .mac = { 0xfe, 0xfd, 0x0, 0x0, 0x0, 0x0},
- .protocol = transport->kern->protocol,
- .open = transport->user->open,
- .close = transport->user->close,
- .remove = transport->user->remove,
- .read = transport->kern->read,
- .write = transport->kern->write,
- .add_address = transport->user->add_address,
- .delete_address = transport->user->delete_address,
- .set_mtu = transport->user->set_mtu,
- .user = { save } });
+ spin_lock(&devices_lock);
+ list_add(&device->list, &devices);
+ spin_unlock(&devices_lock);
- init_timer(&lp->tl);
- spin_lock_init(&lp->lock);
- lp->tl.function = uml_net_user_timer_expire;
- memcpy(lp->mac, device->mac, sizeof(lp->mac));
+ return;
- if (transport->user->init)
- (*transport->user->init)(&lp->user, dev);
-
- set_ether_mac(dev, device->mac);
-
- return 0;
+out_undo_user_init:
+ if (transport->user->remove != NULL)
+ (*transport->user->remove)(&lp->user);
+out_unregister:
+ platform_device_unregister(&device->pdev);
+out_free_netdev:
+ free_netdev(dev);
+out_free_device:
+ kfree(device);
}
static struct uml_net *find_device(int n)
@@ -666,13 +704,9 @@
lp = dev->priv;
if(lp->fd > 0)
return -EBUSY;
- if(lp->remove != NULL) (*lp->remove)(&lp->user);
unregister_netdev(dev);
platform_device_unregister(&device->pdev);
- list_del(&device->list);
- kfree(device);
- free_netdev(dev);
return 0;
}
diff --git a/arch/um/drivers/net_user.c b/arch/um/drivers/net_user.c
index 0ffd7ac..3503cff 100644
--- a/arch/um/drivers/net_user.c
+++ b/arch/um/drivers/net_user.c
@@ -14,11 +14,11 @@
#include <sys/wait.h>
#include <sys/time.h>
#include "user.h"
-#include "user_util.h"
#include "kern_util.h"
#include "net_user.h"
#include "os.h"
#include "um_malloc.h"
+#include "kern_constants.h"
int tap_open_common(void *dev, char *gate_addr)
{
@@ -216,7 +216,7 @@
sprintf(netmask_buf, "%d.%d.%d.%d", netmask[0], netmask[1],
netmask[2], netmask[3]);
- output_len = page_size();
+ output_len = UM_KERN_PAGE_SIZE;
output = um_kmalloc(output_len);
if(output == NULL)
printk("change : failed to allocate output buffer\n");
diff --git a/arch/um/drivers/pcap_user.c b/arch/um/drivers/pcap_user.c
index 11921a7..dc0a903 100644
--- a/arch/um/drivers/pcap_user.c
+++ b/arch/um/drivers/pcap_user.c
@@ -18,7 +18,7 @@
#define PCAP_FD(p) (*(int *)(p))
-static void pcap_user_init(void *data, void *dev)
+static int pcap_user_init(void *data, void *dev)
{
struct pcap_data *pri = data;
pcap_t *p;
@@ -28,11 +28,12 @@
if(p == NULL){
printk("pcap_user_init : pcap_open_live failed - '%s'\n",
errors);
- return;
+ return -EINVAL;
}
pri->dev = dev;
pri->pcap = p;
+ return 0;
}
static int pcap_open(void *data)
@@ -42,39 +43,39 @@
int err;
if(pri->pcap == NULL)
- return(-ENODEV);
+ return -ENODEV;
if(pri->filter != NULL){
err = dev_netmask(pri->dev, &netmask);
if(err < 0){
printk("pcap_open : dev_netmask failed\n");
- return(-EIO);
+ return -EIO;
}
pri->compiled = um_kmalloc(sizeof(struct bpf_program));
if(pri->compiled == NULL){
printk("pcap_open : kmalloc failed\n");
- return(-ENOMEM);
+ return -ENOMEM;
}
-
+
err = pcap_compile(pri->pcap,
(struct bpf_program *) pri->compiled,
pri->filter, pri->optimize, netmask);
if(err < 0){
printk("pcap_open : pcap_compile failed - '%s'\n",
pcap_geterr(pri->pcap));
- return(-EIO);
+ return -EIO;
}
err = pcap_setfilter(pri->pcap, pri->compiled);
if(err < 0){
printk("pcap_open : pcap_setfilter failed - '%s'\n",
pcap_geterr(pri->pcap));
- return(-EIO);
+ return -EIO;
}
}
-
- return(PCAP_FD(pri->pcap));
+
+ return PCAP_FD(pri->pcap);
}
static void pcap_remove(void *data)
@@ -114,11 +115,11 @@
n = pcap_dispatch(pri->pcap, 1, handler, (u_char *) &hdata);
if(n < 0){
printk("pcap_dispatch failed - %s\n", pcap_geterr(pri->pcap));
- return(-EIO);
+ return -EIO;
}
else if(n == 0)
- return(0);
- return(hdata.len);
+ return 0;
+ return hdata.len;
}
const struct net_user_info pcap_user_info = {
@@ -131,14 +132,3 @@
.delete_address = NULL,
.max_packet = MAX_PACKET - ETH_HEADER_OTHER
};
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
diff --git a/arch/um/drivers/port_user.c b/arch/um/drivers/port_user.c
index 8050802..3f6357d 100644
--- a/arch/um/drivers/port_user.c
+++ b/arch/um/drivers/port_user.c
@@ -13,7 +13,6 @@
#include <sys/socket.h>
#include <sys/un.h>
#include <netinet/in.h>
-#include "user_util.h"
#include "kern_util.h"
#include "user.h"
#include "chan_user.h"
diff --git a/arch/um/drivers/pty.c b/arch/um/drivers/pty.c
index 829a5ec..df4976c 100644
--- a/arch/um/drivers/pty.c
+++ b/arch/um/drivers/pty.c
@@ -4,13 +4,13 @@
*/
#include <stdio.h>
+#include <stdlib.h>
#include <unistd.h>
#include <string.h>
#include <errno.h>
#include <termios.h>
#include "chan_user.h"
#include "user.h"
-#include "user_util.h"
#include "kern_util.h"
#include "os.h"
#include "um_malloc.h"
diff --git a/arch/um/drivers/slip_user.c b/arch/um/drivers/slip_user.c
index 7eddacc..78f0e51 100644
--- a/arch/um/drivers/slip_user.c
+++ b/arch/um/drivers/slip_user.c
@@ -8,7 +8,6 @@
#include <sys/termios.h>
#include <sys/wait.h>
#include <sys/signal.h>
-#include "user_util.h"
#include "kern_util.h"
#include "user.h"
#include "net_user.h"
@@ -16,12 +15,14 @@
#include "slip_common.h"
#include "os.h"
#include "um_malloc.h"
+#include "kern_constants.h"
-void slip_user_init(void *data, void *dev)
+static int slip_user_init(void *data, void *dev)
{
struct slip_data *pri = data;
pri->dev = dev;
+ return 0;
}
static int set_up_tty(int fd)
@@ -89,7 +90,7 @@
goto out_close;
pid = err;
- output_len = page_size();
+ output_len = UM_KERN_PAGE_SIZE;
output = um_kmalloc(output_len);
if(output == NULL){
printk("slip_tramp : failed to allocate output buffer\n");
diff --git a/arch/um/drivers/slirp_user.c b/arch/um/drivers/slirp_user.c
index ce5e85d..39f889f 100644
--- a/arch/um/drivers/slirp_user.c
+++ b/arch/um/drivers/slirp_user.c
@@ -7,7 +7,6 @@
#include <errno.h>
#include <sys/wait.h>
#include <sys/signal.h>
-#include "user_util.h"
#include "kern_util.h"
#include "user.h"
#include "net_user.h"
@@ -15,11 +14,12 @@
#include "slip_common.h"
#include "os.h"
-void slirp_user_init(void *data, void *dev)
+static int slirp_user_init(void *data, void *dev)
{
struct slirp_data *pri = data;
pri->dev = dev;
+ return 0;
}
struct slirp_pre_exec_data {
diff --git a/arch/um/drivers/ssl.c b/arch/um/drivers/ssl.c
index 4b382a6..fd09ad9 100644
--- a/arch/um/drivers/ssl.c
+++ b/arch/um/drivers/ssl.c
@@ -15,7 +15,6 @@
#include "line.h"
#include "ssl.h"
#include "chan_kern.h"
-#include "user_util.h"
#include "kern_util.h"
#include "kern.h"
#include "init.h"
@@ -192,12 +191,12 @@
ssl_driver = register_lines(&driver, &ssl_ops, serial_lines,
ARRAY_SIZE(serial_lines));
- lines_init(serial_lines, ARRAY_SIZE(serial_lines), &opts);
-
new_title = add_xterm_umid(opts.xterm_title);
if (new_title != NULL)
opts.xterm_title = new_title;
+ lines_init(serial_lines, ARRAY_SIZE(serial_lines), &opts);
+
ssl_init_done = 1;
register_console(&ssl_cons);
return 0;
diff --git a/arch/um/drivers/stdio_console.c b/arch/um/drivers/stdio_console.c
index 76d1f1c..2bb4193 100644
--- a/arch/um/drivers/stdio_console.c
+++ b/arch/um/drivers/stdio_console.c
@@ -22,7 +22,6 @@
#include "stdio_console.h"
#include "line.h"
#include "chan_kern.h"
-#include "user_util.h"
#include "kern_util.h"
#include "irq_user.h"
#include "mconsole_kern.h"
@@ -167,12 +166,12 @@
return -1;
printk(KERN_INFO "Initialized stdio console driver\n");
- lines_init(vts, ARRAY_SIZE(vts), &opts);
-
new_title = add_xterm_umid(opts.xterm_title);
if(new_title != NULL)
opts.xterm_title = new_title;
+ lines_init(vts, ARRAY_SIZE(vts), &opts);
+
con_init_done = 1;
register_console(&stdiocons);
return 0;
diff --git a/arch/um/drivers/tty.c b/arch/um/drivers/tty.c
index d95d643..c07d0d5 100644
--- a/arch/um/drivers/tty.c
+++ b/arch/um/drivers/tty.c
@@ -8,7 +8,6 @@
#include <errno.h>
#include <unistd.h>
#include "chan_user.h"
-#include "user_util.h"
#include "user.h"
#include "os.h"
#include "um_malloc.h"
diff --git a/arch/um/drivers/ubd_kern.c b/arch/um/drivers/ubd_kern.c
index 8bd9204..70509dd 100644
--- a/arch/um/drivers/ubd_kern.c
+++ b/arch/um/drivers/ubd_kern.c
@@ -39,7 +39,6 @@
#include "asm/irq.h"
#include "asm/types.h"
#include "asm/tlbflush.h"
-#include "user_util.h"
#include "mem_user.h"
#include "kern_util.h"
#include "kern.h"
@@ -90,7 +89,7 @@
bits = sizeof(data[0]) * 8;
n = bit / bits;
off = bit % bits;
- return((data[n] & (1 << off)) != 0);
+ return (data[n] & (1 << off)) != 0;
}
static inline void ubd_set_bit(__u64 bit, unsigned char *data)
@@ -147,10 +146,13 @@
unsigned long *bitmap;
unsigned long bitmap_len;
int bitmap_offset;
- int data_offset;
+ int data_offset;
};
+#define MAX_SG 64
+
struct ubd {
+ struct list_head restart;
/* name (and fd, below) of the file opened for writing, either the
* backing or the cow file. */
char *file;
@@ -165,15 +167,17 @@
struct platform_device pdev;
struct request_queue *queue;
spinlock_t lock;
- int active;
+ struct scatterlist sg[MAX_SG];
+ struct request *request;
+ int start_sg, end_sg;
};
#define DEFAULT_COW { \
.file = NULL, \
- .fd = -1, \
- .bitmap = NULL, \
+ .fd = -1, \
+ .bitmap = NULL, \
.bitmap_offset = 0, \
- .data_offset = 0, \
+ .data_offset = 0, \
}
#define DEFAULT_UBD { \
@@ -183,11 +187,13 @@
.size = -1, \
.boot_openflags = OPEN_FLAGS, \
.openflags = OPEN_FLAGS, \
- .no_cow = 0, \
+ .no_cow = 0, \
.shared = 0, \
- .cow = DEFAULT_COW, \
+ .cow = DEFAULT_COW, \
.lock = SPIN_LOCK_UNLOCKED, \
- .active = 0, \
+ .request = NULL, \
+ .start_sg = 0, \
+ .end_sg = 0, \
}
/* Protected by ubd_lock */
@@ -243,7 +249,7 @@
static int fake_ide_setup(char *str)
{
fake_ide = 1;
- return(1);
+ return 1;
}
__setup("fake_ide", fake_ide_setup);
@@ -261,7 +267,7 @@
if(isdigit(*str)) {
n = simple_strtoul(str, &end, 0);
if(end == str)
- return(-1);
+ return -1;
*ptr = end;
}
else if (('a' <= *str) && (*str <= 'z')) {
@@ -269,7 +275,7 @@
str++;
*ptr = str;
}
- return(n);
+ return n;
}
/* If *index_out == -1 at exit, the passed option was a general one;
@@ -436,7 +442,7 @@
{
printk("udb%s specified on command line is almost certainly a ubd -> "
"udb TYPO\n", str);
- return(1);
+ return 1;
}
__setup("udb", udb_setup);
@@ -467,66 +473,75 @@
/* Only changed by ubd_init, which is an initcall. */
int thread_fd = -1;
-/* call ubd_finish if you need to serialize */
-static void __ubd_finish(struct request *req, int error)
+static void ubd_end_request(struct request *req, int bytes, int uptodate)
{
- int nsect;
+ if (!end_that_request_first(req, uptodate, bytes >> 9)) {
+ struct ubd *dev = req->rq_disk->private_data;
+ unsigned long flags;
- if(error){
- end_request(req, 0);
- return;
+ add_disk_randomness(req->rq_disk);
+ spin_lock_irqsave(&dev->lock, flags);
+ end_that_request_last(req, uptodate);
+ spin_unlock_irqrestore(&dev->lock, flags);
}
- nsect = req->current_nr_sectors;
- req->sector += nsect;
- req->buffer += nsect << 9;
- req->errors = 0;
- req->nr_sectors -= nsect;
- req->current_nr_sectors = 0;
- end_request(req, 1);
}
/* Callable only from interrupt context - otherwise you need to do
* spin_lock_irq()/spin_lock_irqsave() */
-static inline void ubd_finish(struct request *req, int error)
+static inline void ubd_finish(struct request *req, int bytes)
{
- struct ubd *dev = req->rq_disk->private_data;
-
- spin_lock(&dev->lock);
- __ubd_finish(req, error);
- spin_unlock(&dev->lock);
+ if(bytes < 0){
+ ubd_end_request(req, 0, 0);
+ return;
+ }
+ ubd_end_request(req, bytes, 1);
}
+static LIST_HEAD(restart);
+
/* XXX - move this inside ubd_intr. */
/* Called without dev->lock held, and only in interrupt context. */
static void ubd_handler(void)
{
- struct io_thread_req req;
+ struct io_thread_req *req;
struct request *rq;
- struct ubd *dev;
+ struct ubd *ubd;
+ struct list_head *list, *next_ele;
+ unsigned long flags;
int n;
- n = os_read_file(thread_fd, &req, sizeof(req));
- if(n != sizeof(req)){
- printk(KERN_ERR "Pid %d - spurious interrupt in ubd_handler, "
- "err = %d\n", os_getpid(), -n);
- return;
+ while(1){
+ n = os_read_file(thread_fd, &req,
+ sizeof(struct io_thread_req *));
+ if(n != sizeof(req)){
+ if(n == -EAGAIN)
+ break;
+ printk(KERN_ERR "spurious interrupt in ubd_handler, "
+ "err = %d\n", -n);
+ return;
+ }
+
+ rq = req->req;
+ rq->nr_sectors -= req->length >> 9;
+ if(rq->nr_sectors == 0)
+ ubd_finish(rq, rq->hard_nr_sectors << 9);
+ kfree(req);
}
-
- rq = req.req;
- dev = rq->rq_disk->private_data;
- dev->active = 0;
-
- ubd_finish(rq, req.error);
reactivate_fd(thread_fd, UBD_IRQ);
- spin_lock(&dev->lock);
- do_ubd_request(dev->queue);
- spin_unlock(&dev->lock);
+
+ list_for_each_safe(list, next_ele, &restart){
+ ubd = container_of(list, struct ubd, restart);
+ list_del_init(&ubd->restart);
+ spin_lock_irqsave(&ubd->lock, flags);
+ do_ubd_request(ubd->queue);
+ spin_unlock_irqrestore(&ubd->lock, flags);
+ }
}
static irqreturn_t ubd_intr(int irq, void *dev)
{
ubd_handler();
- return(IRQ_HANDLED);
+ return IRQ_HANDLED;
}
/* Only changed by ubd_init, which is an initcall. */
@@ -545,7 +560,7 @@
char *file;
file = ubd_dev->cow.file ? ubd_dev->cow.file : ubd_dev->file;
- return(os_file_size(file, size_out));
+ return os_file_size(file, size_out);
}
static void ubd_close_dev(struct ubd *ubd_dev)
@@ -617,10 +632,18 @@
if(err < 0) goto error;
ubd_dev->cow.fd = err;
}
- return(0);
+ return 0;
error:
os_close_file(ubd_dev->fd);
- return(err);
+ return err;
+}
+
+static void ubd_device_release(struct device *dev)
+{
+ struct ubd *ubd_dev = dev->driver_data;
+
+ blk_cleanup_queue(ubd_dev->queue);
+ *ubd_dev = ((struct ubd) DEFAULT_UBD);
}
static int ubd_disk_register(int major, u64 size, int unit,
@@ -630,7 +653,7 @@
disk = alloc_disk(1 << UBD_SHIFT);
if(disk == NULL)
- return(-ENOMEM);
+ return -ENOMEM;
disk->major = major;
disk->first_minor = unit << UBD_SHIFT;
@@ -645,6 +668,8 @@
if (major == MAJOR_NR) {
ubd_devs[unit].pdev.id = unit;
ubd_devs[unit].pdev.name = DRIVER_NAME;
+ ubd_devs[unit].pdev.dev.release = ubd_device_release;
+ ubd_devs[unit].pdev.dev.driver_data = &ubd_devs[unit];
platform_device_register(&ubd_devs[unit].pdev);
disk->driverfs_dev = &ubd_devs[unit].pdev.dev;
}
@@ -675,6 +700,8 @@
ubd_dev->size = ROUND_BLOCK(ubd_dev->size);
+ INIT_LIST_HEAD(&ubd_dev->restart);
+
err = -ENOMEM;
ubd_dev->queue = blk_init_queue(do_ubd_request, &ubd_dev->lock);
if (ubd_dev->queue == NULL) {
@@ -683,6 +710,7 @@
}
ubd_dev->queue->queuedata = ubd_dev;
+ blk_queue_max_hw_segments(ubd_dev->queue, MAX_SG);
err = ubd_disk_register(MAJOR_NR, ubd_dev->size, n, &ubd_gendisk[n]);
if(err){
*error_out = "Failed to register device";
@@ -730,14 +758,14 @@
goto err_free;
}
- mutex_lock(&ubd_lock);
+ mutex_lock(&ubd_lock);
ret = ubd_add(n, error_out);
if (ret)
ubd_devs[n].file = NULL;
- mutex_unlock(&ubd_lock);
+ mutex_unlock(&ubd_lock);
out:
- return ret;
+ return ret;
err_free:
kfree(str);
@@ -752,7 +780,7 @@
n = parse_unit(&name);
if((n >= MAX_DEV) || (n < 0)){
*error_out = "ubd_get_config : device number out of range";
- return(-1);
+ return -1;
}
ubd_dev = &ubd_devs[n];
@@ -773,29 +801,27 @@
out:
mutex_unlock(&ubd_lock);
- return(len);
+ return len;
}
static int ubd_id(char **str, int *start_out, int *end_out)
{
- int n;
+ int n;
n = parse_unit(str);
- *start_out = 0;
- *end_out = MAX_DEV - 1;
- return n;
+ *start_out = 0;
+ *end_out = MAX_DEV - 1;
+ return n;
}
static int ubd_remove(int n, char **error_out)
{
+ struct gendisk *disk = ubd_gendisk[n];
struct ubd *ubd_dev;
int err = -ENODEV;
mutex_lock(&ubd_lock);
- if(ubd_gendisk[n] == NULL)
- goto out;
-
ubd_dev = &ubd_devs[n];
if(ubd_dev->file == NULL)
@@ -806,9 +832,11 @@
if(ubd_dev->count > 0)
goto out;
- del_gendisk(ubd_gendisk[n]);
- put_disk(ubd_gendisk[n]);
ubd_gendisk[n] = NULL;
+ if(disk != NULL){
+ del_gendisk(disk);
+ put_disk(disk);
+ }
if(fake_gendisk[n] != NULL){
del_gendisk(fake_gendisk[n]);
@@ -816,10 +844,8 @@
fake_gendisk[n] = NULL;
}
- blk_cleanup_queue(ubd_dev->queue);
- platform_device_unregister(&ubd_dev->pdev);
- *ubd_dev = ((struct ubd) DEFAULT_UBD);
err = 0;
+ platform_device_unregister(&ubd_dev->pdev);
out:
mutex_unlock(&ubd_lock);
return err;
@@ -832,7 +858,7 @@
.list = LIST_HEAD_INIT(ubd_mc.list),
.name = "ubd",
.config = ubd_config,
- .get_config = ubd_get_config,
+ .get_config = ubd_get_config,
.id = ubd_id,
.remove = ubd_remove,
};
@@ -854,7 +880,7 @@
ubd_dev->file = "root_fs";
mutex_unlock(&ubd_lock);
- return(0);
+ return 0;
}
__initcall(ubd0_init);
@@ -882,14 +908,14 @@
return -1;
}
platform_driver_register(&ubd_driver);
- mutex_lock(&ubd_lock);
+ mutex_lock(&ubd_lock);
for (i = 0; i < MAX_DEV; i++){
err = ubd_add(i, &error);
if(err)
printk(KERN_ERR "Failed to initialize ubd device %d :"
"%s\n", i, error);
}
- mutex_unlock(&ubd_lock);
+ mutex_unlock(&ubd_lock);
return 0;
}
@@ -913,7 +939,7 @@
"ubd : Failed to start I/O thread (errno = %d) - "
"falling back to synchronous I/O\n", -io_pid);
io_pid = -1;
- return(0);
+ return 0;
}
err = um_request_irq(UBD_IRQ, thread_fd, IRQ_READ, ubd_intr,
IRQF_DISABLED, "ubd", ubd_devs);
@@ -948,7 +974,7 @@
err = -EROFS;
}*/
out:
- return(err);
+ return err;
}
static int ubd_release(struct inode * inode, struct file * file)
@@ -958,7 +984,7 @@
if(--ubd_dev->count == 0)
ubd_close_dev(ubd_dev);
- return(0);
+ return 0;
}
static void cowify_bitmap(__u64 io_offset, int length, unsigned long *cow_mask,
@@ -1014,7 +1040,7 @@
if(ubd_test_bit(sector + i, (unsigned char *) bitmap))
ubd_set_bit(i, (unsigned char *)
&req->sector_mask);
- }
+ }
}
else cowify_bitmap(req->offset, req->length, &req->sector_mask,
&req->cow_offset, bitmap, bitmap_offset,
@@ -1022,26 +1048,16 @@
}
/* Called with dev->lock held */
-static int prepare_request(struct request *req, struct io_thread_req *io_req)
+static void prepare_request(struct request *req, struct io_thread_req *io_req,
+ unsigned long long offset, int page_offset,
+ int len, struct page *page)
{
struct gendisk *disk = req->rq_disk;
struct ubd *ubd_dev = disk->private_data;
- __u64 offset;
- int len;
-
- /* This should be impossible now */
- if((rq_data_dir(req) == WRITE) && !ubd_dev->openflags.w){
- printk("Write attempted on readonly ubd device %s\n",
- disk->disk_name);
- end_request(req, 0);
- return(1);
- }
-
- offset = ((__u64) req->sector) << 9;
- len = req->current_nr_sectors << 9;
io_req->req = req;
- io_req->fds[0] = (ubd_dev->cow.file != NULL) ? ubd_dev->cow.fd : ubd_dev->fd;
+ io_req->fds[0] = (ubd_dev->cow.file != NULL) ? ubd_dev->cow.fd :
+ ubd_dev->fd;
io_req->fds[1] = ubd_dev->fd;
io_req->cow_offset = -1;
io_req->offset = offset;
@@ -1052,45 +1068,66 @@
io_req->op = (rq_data_dir(req) == READ) ? UBD_READ : UBD_WRITE;
io_req->offsets[0] = 0;
io_req->offsets[1] = ubd_dev->cow.data_offset;
- io_req->buffer = req->buffer;
+ io_req->buffer = page_address(page) + page_offset;
io_req->sectorsize = 1 << 9;
if(ubd_dev->cow.file != NULL)
- cowify_req(io_req, ubd_dev->cow.bitmap, ubd_dev->cow.bitmap_offset,
- ubd_dev->cow.bitmap_len);
+ cowify_req(io_req, ubd_dev->cow.bitmap,
+ ubd_dev->cow.bitmap_offset, ubd_dev->cow.bitmap_len);
- return(0);
}
/* Called with dev->lock held */
static void do_ubd_request(request_queue_t *q)
{
- struct io_thread_req io_req;
+ struct io_thread_req *io_req;
struct request *req;
- int err, n;
+ int n;
- if(thread_fd == -1){
- while((req = elv_next_request(q)) != NULL){
- err = prepare_request(req, &io_req);
- if(!err){
- do_io(&io_req);
- __ubd_finish(req, io_req.error);
- }
- }
- }
- else {
+ while(1){
struct ubd *dev = q->queuedata;
- if(dev->active || (req = elv_next_request(q)) == NULL)
- return;
- err = prepare_request(req, &io_req);
- if(!err){
- dev->active = 1;
- n = os_write_file(thread_fd, (char *) &io_req,
- sizeof(io_req));
- if(n != sizeof(io_req))
- printk("write to io thread failed, "
- "errno = %d\n", -n);
+ if(dev->end_sg == 0){
+ struct request *req = elv_next_request(q);
+ if(req == NULL)
+ return;
+
+ dev->request = req;
+ blkdev_dequeue_request(req);
+ dev->start_sg = 0;
+ dev->end_sg = blk_rq_map_sg(q, req, dev->sg);
}
+
+ req = dev->request;
+ while(dev->start_sg < dev->end_sg){
+ struct scatterlist *sg = &dev->sg[dev->start_sg];
+
+ io_req = kmalloc(sizeof(struct io_thread_req),
+ GFP_ATOMIC);
+ if(io_req == NULL){
+ if(list_empty(&dev->restart))
+ list_add(&dev->restart, &restart);
+ return;
+ }
+ prepare_request(req, io_req,
+ (unsigned long long) req->sector << 9,
+ sg->offset, sg->length, sg->page);
+
+ n = os_write_file(thread_fd, &io_req,
+ sizeof(struct io_thread_req *));
+ if(n != sizeof(struct io_thread_req *)){
+ if(n != -EAGAIN)
+ printk("write to io thread failed, "
+ "errno = %d\n", -n);
+ else if(list_empty(&dev->restart))
+ list_add(&dev->restart, &restart);
+ return;
+ }
+
+ req->sector += sg->length >> 9;
+ dev->start_sg++;
+ }
+ dev->end_sg = 0;
+ dev->request = NULL;
}
}
@@ -1120,21 +1157,21 @@
ubd_id.cyls = ubd_dev->size / (128 * 32 * 512);
if(copy_to_user((char __user *) arg, (char *) &ubd_id,
sizeof(ubd_id)))
- return(-EFAULT);
- return(0);
+ return -EFAULT;
+ return 0;
case CDROMVOLREAD:
if(copy_from_user(&volume, (char __user *) arg, sizeof(volume)))
- return(-EFAULT);
+ return -EFAULT;
volume.channel0 = 255;
volume.channel1 = 255;
volume.channel2 = 255;
volume.channel3 = 255;
if(copy_to_user((char __user *) arg, &volume, sizeof(volume)))
- return(-EFAULT);
- return(0);
+ return -EFAULT;
+ return 0;
}
- return(-EINVAL);
+ return -EINVAL;
}
static int path_requires_switch(char *from_cmdline, char *from_cow, char *cow)
@@ -1176,29 +1213,29 @@
if(err < 0){
printk("Failed to get modification time of backing file "
"\"%s\", err = %d\n", file, -err);
- return(err);
+ return err;
}
err = os_file_size(file, &actual);
if(err < 0){
printk("Failed to get size of backing file \"%s\", "
"err = %d\n", file, -err);
- return(err);
+ return err;
}
- if(actual != size){
+ if(actual != size){
/*__u64 can be a long on AMD64 and with %lu GCC complains; so
* the typecast.*/
printk("Size mismatch (%llu vs %llu) of COW header vs backing "
"file\n", (unsigned long long) size, actual);
- return(-EINVAL);
+ return -EINVAL;
}
if(modtime != mtime){
printk("mtime mismatch (%ld vs %ld) of COW header vs backing "
"file\n", mtime, modtime);
- return(-EINVAL);
+ return -EINVAL;
}
- return(0);
+ return 0;
}
int read_cow_bitmap(int fd, void *buf, int offset, int len)
@@ -1207,13 +1244,13 @@
err = os_seek_file(fd, offset);
if(err < 0)
- return(err);
+ return err;
err = os_read_file(fd, buf, len);
if(err < 0)
- return(err);
+ return err;
- return(0);
+ return 0;
}
int open_ubd_file(char *file, struct openflags *openflags, int shared,
@@ -1231,14 +1268,14 @@
if (fd < 0) {
if ((fd == -ENOENT) && (create_cow_out != NULL))
*create_cow_out = 1;
- if (!openflags->w ||
- ((fd != -EROFS) && (fd != -EACCES)))
+ if (!openflags->w ||
+ ((fd != -EROFS) && (fd != -EACCES)))
return fd;
openflags->w = 0;
fd = os_open_file(file, *openflags, mode);
if (fd < 0)
return fd;
- }
+ }
if(shared)
printk("Not locking \"%s\" on the host\n", file);
@@ -1252,7 +1289,7 @@
/* Successful return case! */
if(backing_file_out == NULL)
- return(fd);
+ return fd;
err = read_cow_header(file_reader, &fd, &version, &backing_file, &mtime,
&size, §orsize, &align, bitmap_offset_out);
@@ -1262,7 +1299,7 @@
goto out_close;
}
if(err)
- return(fd);
+ return fd;
asked_switch = path_requires_switch(*backing_file_out, backing_file, file);
@@ -1285,7 +1322,7 @@
cow_sizes(version, size, sectorsize, align, *bitmap_offset_out,
bitmap_len_out, data_offset_out);
- return fd;
+ return fd;
out_close:
os_close_file(fd);
return err;
@@ -1310,10 +1347,10 @@
bitmap_offset_out, bitmap_len_out,
data_offset_out);
if(!err)
- return(fd);
+ return fd;
os_close_file(fd);
out:
- return(err);
+ return err;
}
static int update_bitmap(struct io_thread_req *req)
@@ -1321,23 +1358,23 @@
int n;
if(req->cow_offset == -1)
- return(0);
+ return 0;
n = os_seek_file(req->fds[1], req->cow_offset);
if(n < 0){
printk("do_io - bitmap lseek failed : err = %d\n", -n);
- return(1);
+ return 1;
}
n = os_write_file(req->fds[1], &req->bitmap_words,
- sizeof(req->bitmap_words));
+ sizeof(req->bitmap_words));
if(n != sizeof(req->bitmap_words)){
printk("do_io - bitmap update failed, err = %d fd = %d\n", -n,
req->fds[1]);
- return(1);
+ return 1;
}
- return(0);
+ return 0;
}
void do_io(struct io_thread_req *req)
@@ -1409,13 +1446,14 @@
int io_thread(void *arg)
{
- struct io_thread_req req;
+ struct io_thread_req *req;
int n;
ignore_sigwinch_sig();
while(1){
- n = os_read_file(kernel_fd, &req, sizeof(req));
- if(n != sizeof(req)){
+ n = os_read_file(kernel_fd, &req,
+ sizeof(struct io_thread_req *));
+ if(n != sizeof(struct io_thread_req *)){
if(n < 0)
printk("io_thread - read failed, fd = %d, "
"err = %d\n", kernel_fd, -n);
@@ -1426,9 +1464,10 @@
continue;
}
io_count++;
- do_io(&req);
- n = os_write_file(kernel_fd, &req, sizeof(req));
- if(n != sizeof(req))
+ do_io(req);
+ n = os_write_file(kernel_fd, &req,
+ sizeof(struct io_thread_req *));
+ if(n != sizeof(struct io_thread_req *))
printk("io_thread - write failed, fd = %d, err = %d\n",
kernel_fd, -n);
}
diff --git a/arch/um/drivers/ubd_user.c b/arch/um/drivers/ubd_user.c
index b94d2bc4f..4707b3f 100644
--- a/arch/um/drivers/ubd_user.c
+++ b/arch/um/drivers/ubd_user.c
@@ -16,7 +16,6 @@
#include <sys/mman.h>
#include <sys/param.h>
#include "asm/types.h"
-#include "user_util.h"
#include "kern_util.h"
#include "user.h"
#include "ubd_user.h"
@@ -47,8 +46,8 @@
pid = clone(io_thread, (void *) sp, CLONE_FILES | CLONE_VM | SIGCHLD,
NULL);
if(pid < 0){
- printk("start_io_thread - clone failed : errno = %d\n", errno);
err = -errno;
+ printk("start_io_thread - clone failed : errno = %d\n", errno);
goto out_close;
}
@@ -60,16 +59,5 @@
kernel_fd = -1;
*fd_out = -1;
out:
- return(err);
+ return err;
}
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
diff --git a/arch/um/drivers/xterm.c b/arch/um/drivers/xterm.c
index 850221d..571c2b3 100644
--- a/arch/um/drivers/xterm.c
+++ b/arch/um/drivers/xterm.c
@@ -14,7 +14,6 @@
#include <sys/socket.h>
#include "kern_util.h"
#include "chan_user.h"
-#include "user_util.h"
#include "user.h"
#include "os.h"
#include "xterm.h"
diff --git a/arch/um/include/arch.h b/arch/um/include/arch.h
new file mode 100644
index 0000000..10ad52d
--- /dev/null
+++ b/arch/um/include/arch.h
@@ -0,0 +1,15 @@
+/*
+ * Copyright (C) 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
+ * Licensed under the GPL
+ */
+
+#ifndef __ARCH_H__
+#define __ARCH_H__
+
+#include "sysdep/ptrace.h"
+
+extern void arch_check_bugs(void);
+extern int arch_fixup(unsigned long address, union uml_pt_regs *regs);
+extern int arch_handle_signal(int sig, union uml_pt_regs *regs);
+
+#endif
diff --git a/arch/um/include/as-layout.h b/arch/um/include/as-layout.h
new file mode 100644
index 0000000..fccf187
--- /dev/null
+++ b/arch/um/include/as-layout.h
@@ -0,0 +1,35 @@
+/*
+ * Copyright (C) 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
+ * Licensed under the GPL
+ */
+
+#ifndef __START_H__
+#define __START_H__
+
+#include "sysdep/ptrace.h"
+
+struct cpu_task {
+ int pid;
+ void *task;
+};
+
+extern struct cpu_task cpu_tasks[];
+
+extern unsigned long low_physmem;
+extern unsigned long high_physmem;
+extern unsigned long uml_physmem;
+extern unsigned long uml_reserved;
+extern unsigned long end_vm;
+extern unsigned long start_vm;
+extern unsigned long long highmem;
+
+extern unsigned long _stext, _etext, _sdata, _edata, __bss_start, _end;
+extern unsigned long _unprotected_end;
+extern unsigned long brk_start;
+
+extern int linux_main(int argc, char **argv);
+extern void set_cmdline(char *cmd);
+
+extern void (*sig_info[])(int, union uml_pt_regs *);
+
+#endif
diff --git a/arch/um/include/common-offsets.h b/arch/um/include/common-offsets.h
index 461175f..5593a80 100644
--- a/arch/um/include/common-offsets.h
+++ b/arch/um/include/common-offsets.h
@@ -24,5 +24,7 @@
DEFINE(UM_ELFCLASS32, ELFCLASS32);
DEFINE(UM_ELFCLASS64, ELFCLASS64);
+DEFINE(UM_NR_CPUS, NR_CPUS);
+
/* For crypto assembler code. */
DEFINE(crypto_tfm_ctx_offset, offsetof(struct crypto_tfm, __crt_ctx));
diff --git a/arch/um/include/kern_util.h b/arch/um/include/kern_util.h
index 173af02..50a4969 100644
--- a/arch/um/include/kern_util.h
+++ b/arch/um/include/kern_util.h
@@ -8,6 +8,7 @@
#include "sysdep/ptrace.h"
#include "sysdep/faultinfo.h"
+#include "uml-config.h"
typedef void (*kern_hndl)(int, union uml_pt_regs *);
@@ -23,7 +24,6 @@
extern const struct kern_handlers handlinfo_kern;
extern int ncpus;
-extern char *linux_prog;
extern char *gdb_init;
extern int kmalloc_ok;
extern int jail;
@@ -34,7 +34,9 @@
UML_ROUND_DOWN(((unsigned long) addr) + PAGE_SIZE - 1)
extern int kernel_fork(unsigned long flags, int (*fn)(void *), void * arg);
+#ifdef UML_CONFIG_MODE_TT
extern unsigned long stack_sp(unsigned long page);
+#endif
extern int kernel_thread_proc(void *data);
extern void syscall_segv(int sig);
extern int current_pid(void);
@@ -42,7 +44,7 @@
extern int do_signal(void);
extern int is_stack_fault(unsigned long sp);
extern unsigned long segv(struct faultinfo fi, unsigned long ip,
- int is_user, void *sc);
+ int is_user, union uml_pt_regs *regs);
extern int handle_page_fault(unsigned long address, unsigned long ip,
int is_write, int is_user, int *code_out);
extern void syscall_ready(void);
@@ -50,7 +52,6 @@
extern int is_tracing(void *task);
extern int segv_syscall(void);
extern void kern_finish_exec(void *task, int new_pid, unsigned long stack);
-extern int page_size(void);
extern unsigned long page_mask(void);
extern int need_finish_fork(void);
extern void free_stack(unsigned long stack, int order);
@@ -58,7 +59,6 @@
extern char *current_cmd(void);
extern void timer_handler(int sig, union uml_pt_regs *regs);
extern int set_signals(int enable);
-extern void force_sigbus(void);
extern int pid_to_processor_id(int pid);
extern void deliver_signals(void *t);
extern int next_trap_index(int max);
@@ -70,7 +70,6 @@
extern void syscall_trace(union uml_pt_regs *regs, int entryexit);
extern int hz(void);
extern unsigned int do_IRQ(int irq, union uml_pt_regs *regs);
-extern int external_pid(void *t);
extern void interrupt_end(void);
extern void initial_thread_cb(void (*proc)(void *), void *arg);
extern int debugger_signal(int status, int pid);
@@ -81,7 +80,6 @@
extern int singlestepping(void *t);
extern void check_stack_overflow(void *ptr);
extern void relay_signal(int sig, union uml_pt_regs *regs);
-extern void not_implemented(void);
extern int user_context(unsigned long sp);
extern void timer_irq(union uml_pt_regs *regs);
extern void unprotect_stack(unsigned long stack);
@@ -93,7 +91,6 @@
extern void unprotect_kernel_mem(void);
extern void protect_kernel_mem(void);
extern void uml_cleanup(void);
-extern void set_current(void *t);
extern void lock_signalled_task(void *t);
extern void IPI_handler(int cpu);
extern int jail_setup(char *line, int *add);
@@ -118,4 +115,6 @@
extern int __cant_sleep(void);
extern void sigio_handler(int sig, union uml_pt_regs *regs);
+extern void copy_sc(union uml_pt_regs *regs, void *from);
+
#endif
diff --git a/arch/um/include/net_kern.h b/arch/um/include/net_kern.h
index 125ab42..9237056 100644
--- a/arch/um/include/net_kern.h
+++ b/arch/um/include/net_kern.h
@@ -40,7 +40,7 @@
void (*add_address)(unsigned char *, unsigned char *, void *);
void (*delete_address)(unsigned char *, unsigned char *, void *);
int (*set_mtu)(int mtu, void *);
- int user[1];
+ char user[0];
};
struct net_kern_info {
diff --git a/arch/um/include/net_user.h b/arch/um/include/net_user.h
index 19f207c..cfe7c50 100644
--- a/arch/um/include/net_user.h
+++ b/arch/um/include/net_user.h
@@ -14,7 +14,7 @@
#define UML_NET_VERSION (4)
struct net_user_info {
- void (*init)(void *, void *);
+ int (*init)(void *, void *);
int (*open)(void *);
void (*close)(int, void *);
void (*remove)(void *);
diff --git a/arch/um/include/os.h b/arch/um/include/os.h
index 5c74da4..688d181 100644
--- a/arch/um/include/os.h
+++ b/arch/um/include/os.h
@@ -16,6 +16,8 @@
#include "sysdep/tls.h"
#include "sysdep/archsetjmp.h"
+#define CATCH_EINTR(expr) while ((errno = 0, ((expr) < 0)) && (errno == EINTR))
+
#define OS_TYPE_FILE 1
#define OS_TYPE_DIR 2
#define OS_TYPE_SYMLINK 3
@@ -273,8 +275,9 @@
extern void task_protections(unsigned long address);
extern int raw(int fd);
extern void setup_machinename(char *machine_out);
-extern void setup_hostinfo(void);
+extern void setup_hostinfo(char *buf, int len);
extern int setjmp_wrapper(void (*proc)(void *, void *), ...);
+extern void os_dump_core(void);
/* time.c */
#define BILLION (1000 * 1000 * 1000)
@@ -297,13 +300,12 @@
unsigned long *data, int data_count,
void **addr, void **stub_addr);
extern int map(struct mm_id * mm_idp, unsigned long virt,
- unsigned long len, int r, int w, int x, int phys_fd,
+ unsigned long len, int prot, int phys_fd,
unsigned long long offset, int done, void **data);
-extern int unmap(struct mm_id * mm_idp, void *addr, unsigned long len,
+extern int unmap(struct mm_id * mm_idp, unsigned long addr, unsigned long len,
int done, void **data);
extern int protect(struct mm_id * mm_idp, unsigned long addr,
- unsigned long len, int r, int w, int x, int done,
- void **data);
+ unsigned long len, unsigned int prot, int done, void **data);
/* skas/process.c */
extern int is_skas_winch(int pid, int fd, void *data);
@@ -339,8 +341,11 @@
/* skas/trap */
extern void sig_handler_common_skas(int sig, void *sc_ptr);
-extern void user_signal(int sig, union uml_pt_regs *regs, int pid);
+/* sys-x86_64/prctl.c */
extern int os_arch_prctl(int pid, int code, unsigned long *addr);
+/* tty.c */
+int get_pty(void);
+
#endif
diff --git a/arch/um/include/skas/mode_kern_skas.h b/arch/um/include/skas/mode_kern_skas.h
index 9cd9c6e..8ee6285 100644
--- a/arch/um/include/skas/mode_kern_skas.h
+++ b/arch/um/include/skas/mode_kern_skas.h
@@ -33,6 +33,8 @@
extern int start_uml_skas(void);
extern int external_pid_skas(struct task_struct *task);
extern int thread_pid_skas(struct task_struct *task);
+extern void flush_tlb_page_skas(struct vm_area_struct *vma,
+ unsigned long address);
#define kmem_end_skas (host_task_size - 1024 * 1024)
diff --git a/arch/um/include/tlb.h b/arch/um/include/tlb.h
index 8efc1e0..bcd1a4a 100644
--- a/arch/um/include/tlb.h
+++ b/arch/um/include/tlb.h
@@ -14,9 +14,7 @@
struct {
unsigned long addr;
unsigned long len;
- unsigned int r:1;
- unsigned int w:1;
- unsigned int x:1;
+ unsigned int prot;
int fd;
__u64 offset;
} mmap;
@@ -27,9 +25,7 @@
struct {
unsigned long addr;
unsigned long len;
- unsigned int r:1;
- unsigned int w:1;
- unsigned int x:1;
+ unsigned int prot;
} mprotect;
} u;
};
diff --git a/arch/um/include/tt/uaccess-tt.h b/arch/um/include/tt/uaccess-tt.h
index b19645f..13a64f6 100644
--- a/arch/um/include/tt/uaccess-tt.h
+++ b/arch/um/include/tt/uaccess-tt.h
@@ -27,8 +27,6 @@
#define access_ok_tt(type, addr, size) \
(is_stack(addr, size))
-extern unsigned long get_fault_addr(void);
-
extern int __do_copy_from_user(void *to, const void *from, int n,
void **fault_addr, void **fault_catcher);
extern int __do_strncpy_from_user(char *dst, const char *src, size_t n,
diff --git a/arch/um/include/um_malloc.h b/arch/um/include/um_malloc.h
index 0363a9b..e6d7c5a 100644
--- a/arch/um/include/um_malloc.h
+++ b/arch/um/include/um_malloc.h
@@ -11,7 +11,6 @@
extern void kfree(const void *ptr);
extern void *um_vmalloc(int size);
-extern void *um_vmalloc_atomic(int size);
extern void vfree(void *ptr);
#endif /* __UM_MALLOC_H__ */
diff --git a/arch/um/include/user.h b/arch/um/include/user.h
index acadce3..d380e6d 100644
--- a/arch/um/include/user.h
+++ b/arch/um/include/user.h
@@ -6,6 +6,19 @@
#ifndef __USER_H__
#define __USER_H__
+/*
+ * The usual definition - copied here because the kernel provides its own,
+ * fancier, type-safe, definition. Using that one would require
+ * copying too much infrastructure for my taste, so userspace files
+ * get less checking than kernel files.
+ */
+#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
+
+/*
+ * This will provide the size_t definition in both kernel and userspace builds
+ */
+#include <linux/types.h>
+
extern void panic(const char *fmt, ...)
__attribute__ ((format (printf, 1, 2)));
extern int printk(const char *fmt, ...)
@@ -13,19 +26,7 @@
extern void schedule(void);
extern int in_aton(char *str);
extern int open_gdb_chan(void);
-/* These use size_t, however unsigned long is correct on both i386 and x86_64. */
-extern unsigned long strlcpy(char *, const char *, unsigned long);
-extern unsigned long strlcat(char *, const char *, unsigned long);
+extern size_t strlcpy(char *, const char *, size_t);
+extern size_t strlcat(char *, const char *, size_t);
#endif
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
diff --git a/arch/um/include/user_util.h b/arch/um/include/user_util.h
deleted file mode 100644
index 023575f..0000000
--- a/arch/um/include/user_util.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * Copyright (C) 2000, 2001, 2002 Jeff Dike (jdike@karaya.com)
- * Licensed under the GPL
- */
-
-#ifndef __USER_UTIL_H__
-#define __USER_UTIL_H__
-
-#include "sysdep/ptrace.h"
-
-/* Copied from kernel.h */
-#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
-
-#define CATCH_EINTR(expr) while ((errno = 0, ((expr) < 0)) && (errno == EINTR))
-
-extern int mode_tt;
-
-extern int grantpt(int __fd);
-extern int unlockpt(int __fd);
-extern char *ptsname(int __fd);
-
-struct cpu_task {
- int pid;
- void *task;
-};
-
-extern struct cpu_task cpu_tasks[];
-
-extern void (*sig_info[])(int, union uml_pt_regs *);
-
-extern unsigned long low_physmem;
-extern unsigned long high_physmem;
-extern unsigned long uml_physmem;
-extern unsigned long uml_reserved;
-extern unsigned long end_vm;
-extern unsigned long start_vm;
-extern unsigned long long highmem;
-
-extern char host_info[];
-
-extern unsigned long _stext, _etext, _sdata, _edata, __bss_start, _end;
-extern unsigned long _unprotected_end;
-extern unsigned long brk_start;
-
-extern int pty_output_sigio;
-extern int pty_close_sigio;
-
-extern void *add_signal_handler(int sig, void (*handler)(int));
-extern int linux_main(int argc, char **argv);
-extern void set_cmdline(char *cmd);
-extern void input_cb(void (*proc)(void *), void *arg, int arg_len);
-extern int get_pty(void);
-extern int switcheroo(int fd, int prot, void *from, void *to, int size);
-extern void do_exec(int old_pid, int new_pid);
-extern void tracer_panic(char *msg, ...)
- __attribute__ ((format (printf, 1, 2)));
-extern int detach(int pid, int sig);
-extern int attach(int pid);
-extern void kill_child_dead(int pid);
-extern int cont(int pid);
-extern void check_sigio(void);
-extern void arch_check_bugs(void);
-extern int cpu_feature(char *what, char *buf, int len);
-extern int arch_handle_signal(int sig, union uml_pt_regs *regs);
-extern int arch_fixup(unsigned long address, void *sc_ptr);
-extern void arch_init_thread(void);
-extern int raw(int fd);
-
-#endif
diff --git a/arch/um/kernel/exec.c b/arch/um/kernel/exec.c
index 1211664..356e50f 100644
--- a/arch/um/kernel/exec.c
+++ b/arch/um/kernel/exec.c
@@ -10,8 +10,8 @@
#include "asm/pgtable.h"
#include "asm/tlbflush.h"
#include "asm/uaccess.h"
-#include "user_util.h"
#include "kern_util.h"
+#include "as-layout.h"
#include "mem_user.h"
#include "kern.h"
#include "irq_user.h"
diff --git a/arch/um/kernel/init_task.c b/arch/um/kernel/init_task.c
index 8cde431..cda91aa 100644
--- a/arch/um/kernel/init_task.c
+++ b/arch/um/kernel/init_task.c
@@ -10,7 +10,6 @@
#include "linux/mqueue.h"
#include "asm/uaccess.h"
#include "asm/pgtable.h"
-#include "user_util.h"
#include "mem_user.h"
#include "os.h"
diff --git a/arch/um/kernel/initrd.c b/arch/um/kernel/initrd.c
index 82ecf90..16dc43e 100644
--- a/arch/um/kernel/initrd.c
+++ b/arch/um/kernel/initrd.c
@@ -7,7 +7,6 @@
#include "linux/bootmem.h"
#include "linux/initrd.h"
#include "asm/types.h"
-#include "user_util.h"
#include "kern_util.h"
#include "initrd.h"
#include "init.h"
@@ -22,12 +21,20 @@
long long size;
int err;
- if(initrd == NULL) return 0;
+ if(initrd == NULL)
+ return 0;
+
err = os_file_size(initrd, &size);
- if(err) return 0;
+ if(err)
+ return 0;
+
area = alloc_bootmem(size);
- if(area == NULL) return 0;
- if(load_initrd(initrd, area, size) == -1) return 0;
+ if(area == NULL)
+ return 0;
+
+ if(load_initrd(initrd, area, size) == -1)
+ return 0;
+
initrd_start = (unsigned long) area;
initrd_end = initrd_start + size;
return 0;
@@ -54,25 +61,15 @@
fd = os_open_file(filename, of_read(OPENFLAGS()), 0);
if(fd < 0){
printk("Opening '%s' failed - err = %d\n", filename, -fd);
- return(-1);
+ return -1;
}
n = os_read_file(fd, buf, size);
if(n != size){
printk("Read of %d bytes from '%s' failed, err = %d\n", size,
filename, -n);
- return(-1);
+ return -1;
}
os_close_file(fd);
- return(0);
+ return 0;
}
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
diff --git a/arch/um/kernel/irq.c b/arch/um/kernel/irq.c
index dbf2f5b..8f2ed36 100644
--- a/arch/um/kernel/irq.c
+++ b/arch/um/kernel/irq.c
@@ -25,7 +25,6 @@
#include "asm/system.h"
#include "asm/errno.h"
#include "asm/uaccess.h"
-#include "user_util.h"
#include "kern_util.h"
#include "irq_user.h"
#include "irq_kern.h"
@@ -79,6 +78,14 @@
return 0;
}
+/*
+ * This list is accessed under irq_lock, except in sigio_handler,
+ * where it is safe from being modified. IRQ handlers won't change it -
+ * if an IRQ source has vanished, it will be freed by free_irqs just
+ * before returning from sigio_handler. That will process a separate
+ * list of irqs to free, with its own locking, coming back here to
+ * remove list elements, taking the irq_lock to do so.
+ */
static struct irq_fd *active_fds = NULL;
static struct irq_fd **last_irq_ptr = &active_fds;
@@ -244,6 +251,7 @@
free_irq_by_cb(same_fd, &fd);
}
+/* Must be called with irq_lock held */
static struct irq_fd *find_irq_by_fd(int fd, int irqnum, int *index_out)
{
struct irq_fd *irq;
@@ -309,6 +317,12 @@
ignore_sigio_fd(fd);
}
+/*
+ * Called just before shutdown in order to provide a clean exec
+ * environment in case the system is rebooting. No locking because
+ * that would cause a pointless shutdown hang if something hadn't
+ * released the lock.
+ */
int deactivate_all_fds(void)
{
struct irq_fd *irq;
diff --git a/arch/um/kernel/ksyms.c b/arch/um/kernel/ksyms.c
index 0e00cf9..7b3e53f 100644
--- a/arch/um/kernel/ksyms.c
+++ b/arch/um/kernel/ksyms.c
@@ -16,7 +16,7 @@
#include "asm/page.h"
#include "asm/tlbflush.h"
#include "kern_util.h"
-#include "user_util.h"
+#include "as-layout.h"
#include "mem_user.h"
#include "os.h"
diff --git a/arch/um/kernel/mem.c b/arch/um/kernel/mem.c
index df7d662..72ff856 100644
--- a/arch/um/kernel/mem.c
+++ b/arch/um/kernel/mem.c
@@ -13,8 +13,8 @@
#include "asm/page.h"
#include "asm/fixmap.h"
#include "asm/pgalloc.h"
-#include "user_util.h"
#include "kern_util.h"
+#include "as-layout.h"
#include "kern.h"
#include "mem_user.h"
#include "uml_uaccess.h"
@@ -216,7 +216,7 @@
#endif
}
-void paging_init(void)
+void __init paging_init(void)
{
unsigned long zones_size[MAX_NR_ZONES], vaddr;
int i;
diff --git a/arch/um/kernel/physmem.c b/arch/um/kernel/physmem.c
index 638f3b5..3ba6e4c 100644
--- a/arch/um/kernel/physmem.c
+++ b/arch/um/kernel/physmem.c
@@ -13,7 +13,7 @@
#include "asm/types.h"
#include "asm/pgtable.h"
#include "kern_util.h"
-#include "user_util.h"
+#include "as-layout.h"
#include "mode_kern.h"
#include "mem.h"
#include "mem_user.h"
@@ -21,229 +21,8 @@
#include "kern.h"
#include "init.h"
-struct phys_desc {
- struct rb_node rb;
- int fd;
- __u64 offset;
- void *virt;
- unsigned long phys;
- struct list_head list;
-};
-
-static struct rb_root phys_mappings = RB_ROOT;
-
-static struct rb_node **find_rb(void *virt)
-{
- struct rb_node **n = &phys_mappings.rb_node;
- struct phys_desc *d;
-
- while(*n != NULL){
- d = rb_entry(*n, struct phys_desc, rb);
- if(d->virt == virt)
- return n;
-
- if(d->virt > virt)
- n = &(*n)->rb_left;
- else
- n = &(*n)->rb_right;
- }
-
- return n;
-}
-
-static struct phys_desc *find_phys_mapping(void *virt)
-{
- struct rb_node **n = find_rb(virt);
-
- if(*n == NULL)
- return NULL;
-
- return rb_entry(*n, struct phys_desc, rb);
-}
-
-static void insert_phys_mapping(struct phys_desc *desc)
-{
- struct rb_node **n = find_rb(desc->virt);
-
- if(*n != NULL)
- panic("Physical remapping for %p already present",
- desc->virt);
-
- rb_link_node(&desc->rb, rb_parent(*n), n);
- rb_insert_color(&desc->rb, &phys_mappings);
-}
-
-LIST_HEAD(descriptor_mappings);
-
-struct desc_mapping {
- int fd;
- struct list_head list;
- struct list_head pages;
-};
-
-static struct desc_mapping *find_mapping(int fd)
-{
- struct desc_mapping *desc;
- struct list_head *ele;
-
- list_for_each(ele, &descriptor_mappings){
- desc = list_entry(ele, struct desc_mapping, list);
- if(desc->fd == fd)
- return desc;
- }
-
- return NULL;
-}
-
-static struct desc_mapping *descriptor_mapping(int fd)
-{
- struct desc_mapping *desc;
-
- desc = find_mapping(fd);
- if(desc != NULL)
- return desc;
-
- desc = kmalloc(sizeof(*desc), GFP_ATOMIC);
- if(desc == NULL)
- return NULL;
-
- *desc = ((struct desc_mapping)
- { .fd = fd,
- .list = LIST_HEAD_INIT(desc->list),
- .pages = LIST_HEAD_INIT(desc->pages) });
- list_add(&desc->list, &descriptor_mappings);
-
- return desc;
-}
-
-int physmem_subst_mapping(void *virt, int fd, __u64 offset, int w)
-{
- struct desc_mapping *fd_maps;
- struct phys_desc *desc;
- unsigned long phys;
- int err;
-
- fd_maps = descriptor_mapping(fd);
- if(fd_maps == NULL)
- return -ENOMEM;
-
- phys = __pa(virt);
- desc = find_phys_mapping(virt);
- if(desc != NULL)
- panic("Address 0x%p is already substituted\n", virt);
-
- err = -ENOMEM;
- desc = kmalloc(sizeof(*desc), GFP_ATOMIC);
- if(desc == NULL)
- goto out;
-
- *desc = ((struct phys_desc)
- { .fd = fd,
- .offset = offset,
- .virt = virt,
- .phys = __pa(virt),
- .list = LIST_HEAD_INIT(desc->list) });
- insert_phys_mapping(desc);
-
- list_add(&desc->list, &fd_maps->pages);
-
- virt = (void *) ((unsigned long) virt & PAGE_MASK);
- err = os_map_memory(virt, fd, offset, PAGE_SIZE, 1, w, 0);
- if(!err)
- goto out;
-
- rb_erase(&desc->rb, &phys_mappings);
- kfree(desc);
- out:
- return err;
-}
-
static int physmem_fd = -1;
-static void remove_mapping(struct phys_desc *desc)
-{
- void *virt = desc->virt;
- int err;
-
- rb_erase(&desc->rb, &phys_mappings);
- list_del(&desc->list);
- kfree(desc);
-
- err = os_map_memory(virt, physmem_fd, __pa(virt), PAGE_SIZE, 1, 1, 0);
- if(err)
- panic("Failed to unmap block device page from physical memory, "
- "errno = %d", -err);
-}
-
-int physmem_remove_mapping(void *virt)
-{
- struct phys_desc *desc;
-
- virt = (void *) ((unsigned long) virt & PAGE_MASK);
- desc = find_phys_mapping(virt);
- if(desc == NULL)
- return 0;
-
- remove_mapping(desc);
- return 1;
-}
-
-void physmem_forget_descriptor(int fd)
-{
- struct desc_mapping *desc;
- struct phys_desc *page;
- struct list_head *ele, *next;
- __u64 offset;
- void *addr;
- int err;
-
- desc = find_mapping(fd);
- if(desc == NULL)
- return;
-
- list_for_each_safe(ele, next, &desc->pages){
- page = list_entry(ele, struct phys_desc, list);
- offset = page->offset;
- addr = page->virt;
- remove_mapping(page);
- err = os_seek_file(fd, offset);
- if(err)
- panic("physmem_forget_descriptor - failed to seek "
- "to %lld in fd %d, error = %d\n",
- offset, fd, -err);
- err = os_read_file(fd, addr, PAGE_SIZE);
- if(err < 0)
- panic("physmem_forget_descriptor - failed to read "
- "from fd %d to 0x%p, error = %d\n",
- fd, addr, -err);
- }
-
- list_del(&desc->list);
- kfree(desc);
-}
-
-EXPORT_SYMBOL(physmem_forget_descriptor);
-EXPORT_SYMBOL(physmem_remove_mapping);
-EXPORT_SYMBOL(physmem_subst_mapping);
-
-void arch_free_page(struct page *page, int order)
-{
- void *virt;
- int i;
-
- for(i = 0; i < (1 << order); i++){
- virt = __va(page_to_phys(page + i));
- physmem_remove_mapping(virt);
- }
-}
-
-int is_remapped(void *virt)
-{
- struct phys_desc *desc = find_phys_mapping(virt);
-
- return desc != NULL;
-}
-
/* Changed during early boot */
unsigned long high_physmem;
@@ -350,14 +129,9 @@
int phys_mapping(unsigned long phys, __u64 *offset_out)
{
- struct phys_desc *desc = find_phys_mapping(__va(phys & PAGE_MASK));
int fd = -1;
- if(desc != NULL){
- fd = desc->fd;
- *offset_out = desc->offset;
- }
- else if(phys < physmem_size){
+ if(phys < physmem_size){
fd = physmem_fd;
*offset_out = phys;
}
diff --git a/arch/um/kernel/process.c b/arch/um/kernel/process.c
index 348b272..8d2c549 100644
--- a/arch/um/kernel/process.c
+++ b/arch/um/kernel/process.c
@@ -32,8 +32,8 @@
#include "asm/tlbflush.h"
#include "asm/uaccess.h"
#include "asm/user.h"
-#include "user_util.h"
#include "kern_util.h"
+#include "as-layout.h"
#include "kern.h"
#include "signal_kern.h"
#include "init.h"
@@ -54,11 +54,9 @@
*/
struct cpu_task cpu_tasks[NR_CPUS] = { [0 ... NR_CPUS - 1] = { -1, NULL } };
-int external_pid(void *t)
+static inline int external_pid(struct task_struct *task)
{
- struct task_struct *task = t ? t : current;
-
- return(CHOOSE_MODE_PROC(external_pid_tt, external_pid_skas, task));
+ return CHOOSE_MODE_PROC(external_pid_tt, external_pid_skas, task);
}
int pid_to_processor_id(int pid)
@@ -66,9 +64,10 @@
int i;
for(i = 0; i < ncpus; i++){
- if(cpu_tasks[i].pid == pid) return(i);
+ if(cpu_tasks[i].pid == pid)
+ return i;
}
- return(-1);
+ return -1;
}
void free_stack(unsigned long stack, int order)
@@ -85,9 +84,9 @@
flags = GFP_ATOMIC;
page = __get_free_pages(flags, order);
if(page == 0)
- return(0);
+ return 0;
stack_protections(page);
- return(page);
+ return page;
}
int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags)
@@ -98,15 +97,11 @@
current->thread.request.u.thread.arg = arg;
pid = do_fork(CLONE_VM | CLONE_UNTRACED | flags, 0,
¤t->thread.regs, 0, NULL, NULL);
- if(pid < 0)
- panic("do_fork failed in kernel_thread, errno = %d", pid);
- return(pid);
+ return pid;
}
-void set_current(void *t)
+static inline void set_current(struct task_struct *task)
{
- struct task_struct *task = t;
-
cpu_tasks[task_thread_info(task)->cpu] = ((struct cpu_task)
{ external_pid(task), task });
}
@@ -128,14 +123,16 @@
prev= current;
} while(current->thread.saved_task);
- return(current->thread.prev_sched);
+ return current->thread.prev_sched;
}
void interrupt_end(void)
{
- if(need_resched()) schedule();
- if(test_tsk_thread_flag(current, TIF_SIGPENDING)) do_signal();
+ if(need_resched())
+ schedule();
+ if(test_tsk_thread_flag(current, TIF_SIGPENDING))
+ do_signal();
}
void release_thread(struct task_struct *task)
@@ -150,7 +147,7 @@
void *get_current(void)
{
- return(current);
+ return current;
}
int copy_thread(int nr, unsigned long clone_flags, unsigned long sp,
@@ -188,15 +185,12 @@
kmalloc_ok = save_kmalloc_ok;
}
+#ifdef CONFIG_MODE_TT
unsigned long stack_sp(unsigned long page)
{
- return(page + PAGE_SIZE - sizeof(void *));
+ return page + PAGE_SIZE - sizeof(void *);
}
-
-int current_pid(void)
-{
- return(current->pid);
-}
+#endif
void default_idle(void)
{
@@ -221,11 +215,6 @@
CHOOSE_MODE(init_idle_tt(), init_idle_skas());
}
-int page_size(void)
-{
- return(PAGE_SIZE);
-}
-
void *um_virt_to_phys(struct task_struct *task, unsigned long addr,
pte_t *pte_out)
{
@@ -236,68 +225,43 @@
pte_t ptent;
if(task->mm == NULL)
- return(ERR_PTR(-EINVAL));
+ return ERR_PTR(-EINVAL);
pgd = pgd_offset(task->mm, addr);
if(!pgd_present(*pgd))
- return(ERR_PTR(-EINVAL));
+ return ERR_PTR(-EINVAL);
pud = pud_offset(pgd, addr);
if(!pud_present(*pud))
- return(ERR_PTR(-EINVAL));
+ return ERR_PTR(-EINVAL);
pmd = pmd_offset(pud, addr);
if(!pmd_present(*pmd))
- return(ERR_PTR(-EINVAL));
+ return ERR_PTR(-EINVAL);
pte = pte_offset_kernel(pmd, addr);
ptent = *pte;
if(!pte_present(ptent))
- return(ERR_PTR(-EINVAL));
+ return ERR_PTR(-EINVAL);
if(pte_out != NULL)
*pte_out = ptent;
- return((void *) (pte_val(ptent) & PAGE_MASK) + (addr & ~PAGE_MASK));
+ return (void *) (pte_val(ptent) & PAGE_MASK) + (addr & ~PAGE_MASK);
}
char *current_cmd(void)
{
#if defined(CONFIG_SMP) || defined(CONFIG_HIGHMEM)
- return("(Unknown)");
+ return "(Unknown)";
#else
void *addr = um_virt_to_phys(current, current->mm->arg_start, NULL);
return IS_ERR(addr) ? "(Unknown)": __va((unsigned long) addr);
#endif
}
-void force_sigbus(void)
-{
- printk(KERN_ERR "Killing pid %d because of a lack of memory\n",
- current->pid);
- lock_kernel();
- sigaddset(¤t->pending.signal, SIGBUS);
- recalc_sigpending();
- current->flags |= PF_SIGNALED;
- do_exit(SIGBUS | 0x80);
-}
-
void dump_thread(struct pt_regs *regs, struct user *u)
{
}
-void enable_hlt(void)
-{
- panic("enable_hlt");
-}
-
-EXPORT_SYMBOL(enable_hlt);
-
-void disable_hlt(void)
-{
- panic("disable_hlt");
-}
-
-EXPORT_SYMBOL(disable_hlt);
-
void *um_kmalloc(int size)
{
return kmalloc(size, GFP_KERNEL);
@@ -313,36 +277,17 @@
return vmalloc(size);
}
-void *um_vmalloc_atomic(int size)
-{
- return __vmalloc(size, GFP_ATOMIC | __GFP_HIGHMEM, PAGE_KERNEL);
-}
-
int __cant_sleep(void) {
return in_atomic() || irqs_disabled() || in_interrupt();
/* Is in_interrupt() really needed? */
}
-unsigned long get_fault_addr(void)
-{
- return((unsigned long) current->thread.fault_addr);
-}
-
-EXPORT_SYMBOL(get_fault_addr);
-
-void not_implemented(void)
-{
- printk(KERN_DEBUG "Something isn't implemented in here\n");
-}
-
-EXPORT_SYMBOL(not_implemented);
-
int user_context(unsigned long sp)
{
unsigned long stack;
stack = sp & (PAGE_MASK << CONFIG_KERNEL_STACK_ORDER);
- return(stack != (unsigned long) current_thread);
+ return stack != (unsigned long) current_thread;
}
extern exitcall_t __uml_exitcall_begin, __uml_exitcall_end;
@@ -363,22 +308,22 @@
int copy_to_user_proc(void __user *to, void *from, int size)
{
- return(copy_to_user(to, from, size));
+ return copy_to_user(to, from, size);
}
int copy_from_user_proc(void *to, void __user *from, int size)
{
- return(copy_from_user(to, from, size));
+ return copy_from_user(to, from, size);
}
int clear_user_proc(void __user *buf, int size)
{
- return(clear_user(buf, size));
+ return clear_user(buf, size);
}
int strlen_user_proc(char __user *str)
{
- return(strlen_user(str));
+ return strlen_user(str);
}
int smp_sigio_handler(void)
@@ -387,14 +332,14 @@
int cpu = current_thread->cpu;
IPI_handler(cpu);
if(cpu != 0)
- return(1);
+ return 1;
#endif
- return(0);
+ return 0;
}
int cpu(void)
{
- return(current_thread->cpu);
+ return current_thread->cpu;
}
static atomic_t using_sysemu = ATOMIC_INIT(0);
@@ -443,7 +388,7 @@
if (ent == NULL)
{
printk(KERN_WARNING "Failed to register /proc/sysemu\n");
- return(0);
+ return 0;
}
ent->read_proc = proc_read_sysemu;
diff --git a/arch/um/kernel/reboot.c b/arch/um/kernel/reboot.c
index f602623..7e4305a 100644
--- a/arch/um/kernel/reboot.c
+++ b/arch/um/kernel/reboot.c
@@ -6,7 +6,6 @@
#include "linux/module.h"
#include "linux/sched.h"
#include "asm/smp.h"
-#include "user_util.h"
#include "kern_util.h"
#include "kern.h"
#include "os.h"
diff --git a/arch/um/kernel/signal.c b/arch/um/kernel/signal.c
index 3c798cd..c4020c3 100644
--- a/arch/um/kernel/signal.c
+++ b/arch/um/kernel/signal.c
@@ -17,7 +17,6 @@
#include "asm/signal.h"
#include "asm/uaccess.h"
#include "asm/unistd.h"
-#include "user_util.h"
#include "asm/ucontext.h"
#include "kern_util.h"
#include "signal_kern.h"
diff --git a/arch/um/kernel/skas/exec.c b/arch/um/kernel/skas/exec.c
index 54b7959..580eb64 100644
--- a/arch/um/kernel/skas/exec.c
+++ b/arch/um/kernel/skas/exec.c
@@ -17,7 +17,17 @@
void flush_thread_skas(void)
{
- force_flush_all();
+ void *data = NULL;
+ unsigned long end = proc_mm ? task_size : CONFIG_STUB_START;
+ int ret;
+
+ ret = unmap(¤t->mm->context.skas.id, 0, end, 1, &data);
+ if(ret){
+ printk("flush_thread_skas - clearing address space failed, "
+ "err = %d\n", ret);
+ force_sig(SIGKILL, current);
+ }
+
switch_mm_skas(¤t->mm->context.skas.id);
}
diff --git a/arch/um/kernel/skas/process.c b/arch/um/kernel/skas/process.c
index ae4fa71..ef36fac 100644
--- a/arch/um/kernel/skas/process.c
+++ b/arch/um/kernel/skas/process.c
@@ -13,9 +13,9 @@
#include "asm/uaccess.h"
#include "asm/atomic.h"
#include "kern_util.h"
+#include "as-layout.h"
#include "skas.h"
#include "os.h"
-#include "user_util.h"
#include "tlb.h"
#include "kern.h"
#include "mode.h"
diff --git a/arch/um/kernel/skas/tlb.c b/arch/um/kernel/skas/tlb.c
index 27eb29c..c0f0693 100644
--- a/arch/um/kernel/skas/tlb.c
+++ b/arch/um/kernel/skas/tlb.c
@@ -10,7 +10,6 @@
#include "asm/page.h"
#include "asm/pgtable.h"
#include "asm/mmu.h"
-#include "user_util.h"
#include "mem_user.h"
#include "mem.h"
#include "skas.h"
@@ -28,19 +27,17 @@
switch(op->type){
case MMAP:
ret = map(&mmu->skas.id, op->u.mmap.addr,
- op->u.mmap.len, op->u.mmap.r, op->u.mmap.w,
- op->u.mmap.x, op->u.mmap.fd,
- op->u.mmap.offset, finished, flush);
+ op->u.mmap.len, op->u.mmap.prot,
+ op->u.mmap.fd, op->u.mmap.offset, finished,
+ flush);
break;
case MUNMAP:
- ret = unmap(&mmu->skas.id,
- (void *) op->u.munmap.addr,
+ ret = unmap(&mmu->skas.id, op->u.munmap.addr,
op->u.munmap.len, finished, flush);
break;
case MPROTECT:
ret = protect(&mmu->skas.id, op->u.mprotect.addr,
- op->u.mprotect.len, op->u.mprotect.r,
- op->u.mprotect.w, op->u.mprotect.x,
+ op->u.mprotect.len, op->u.mprotect.prot,
finished, flush);
break;
default:
@@ -92,6 +89,76 @@
void force_flush_all_skas(void)
{
- unsigned long end = proc_mm ? task_size : CONFIG_STUB_START;
- fix_range(current->mm, 0, end, 1);
+ struct mm_struct *mm = current->mm;
+ struct vm_area_struct *vma = mm->mmap;
+
+ while(vma != NULL) {
+ fix_range(mm, vma->vm_start, vma->vm_end, 1);
+ vma = vma->vm_next;
+ }
}
+
+void flush_tlb_page_skas(struct vm_area_struct *vma, unsigned long address)
+{
+ pgd_t *pgd;
+ pud_t *pud;
+ pmd_t *pmd;
+ pte_t *pte;
+ struct mm_struct *mm = vma->vm_mm;
+ void *flush = NULL;
+ int r, w, x, prot, err = 0;
+ struct mm_id *mm_id;
+
+ pgd = pgd_offset(mm, address);
+ if(!pgd_present(*pgd))
+ goto kill;
+
+ pud = pud_offset(pgd, address);
+ if(!pud_present(*pud))
+ goto kill;
+
+ pmd = pmd_offset(pud, address);
+ if(!pmd_present(*pmd))
+ goto kill;
+
+ pte = pte_offset_kernel(pmd, address);
+
+ r = pte_read(*pte);
+ w = pte_write(*pte);
+ x = pte_exec(*pte);
+ if (!pte_young(*pte)) {
+ r = 0;
+ w = 0;
+ } else if (!pte_dirty(*pte)) {
+ w = 0;
+ }
+
+ mm_id = &mm->context.skas.id;
+ prot = ((r ? UM_PROT_READ : 0) | (w ? UM_PROT_WRITE : 0) |
+ (x ? UM_PROT_EXEC : 0));
+ if(pte_newpage(*pte)){
+ if(pte_present(*pte)){
+ unsigned long long offset;
+ int fd;
+
+ fd = phys_mapping(pte_val(*pte) & PAGE_MASK, &offset);
+ err = map(mm_id, address, PAGE_SIZE, prot, fd, offset,
+ 1, &flush);
+ }
+ else err = unmap(mm_id, address, PAGE_SIZE, 1, &flush);
+ }
+ else if(pte_newprot(*pte))
+ err = protect(mm_id, address, PAGE_SIZE, prot, 1, &flush);
+
+ if(err)
+ goto kill;
+
+ *pte = pte_mkuptodate(*pte);
+
+ return;
+
+kill:
+ printk("Failed to flush page for address 0x%lx\n", address);
+ force_sig(SIGKILL, current);
+}
+
diff --git a/arch/um/kernel/smp.c b/arch/um/kernel/smp.c
index 759b070..e6a7778 100644
--- a/arch/um/kernel/smp.c
+++ b/arch/um/kernel/smp.c
@@ -21,7 +21,6 @@
#include "asm/smp.h"
#include "asm/processor.h"
#include "asm/spinlock.h"
-#include "user_util.h"
#include "kern_util.h"
#include "kern.h"
#include "irq_user.h"
@@ -90,7 +89,7 @@
cpu_set(cpu, cpu_online_map);
default_idle();
- return(0);
+ return 0;
}
static struct task_struct *idle_thread(int cpu)
@@ -98,8 +97,8 @@
struct task_struct *new_task;
unsigned char c;
- current->thread.request.u.thread.proc = idle_proc;
- current->thread.request.u.thread.arg = (void *) cpu;
+ current->thread.request.u.thread.proc = idle_proc;
+ current->thread.request.u.thread.arg = (void *) cpu;
new_task = fork_idle(cpu);
if(IS_ERR(new_task))
panic("copy_process failed in idle_thread, error = %ld",
@@ -110,9 +109,9 @@
.task = new_task } );
idle_threads[cpu] = new_task;
CHOOSE_MODE(os_write_file(new_task->thread.mode.tt.switch_pipe[1], &c,
- sizeof(c)),
+ sizeof(c)),
({ panic("skas mode doesn't support SMP"); }));
- return(new_task);
+ return new_task;
}
void smp_prepare_cpus(unsigned int maxcpus)
@@ -163,13 +162,13 @@
cpu_set(cpu, smp_commenced_mask);
while (!cpu_isset(cpu, cpu_online_map))
mb();
- return(0);
+ return 0;
}
int setup_profiling_timer(unsigned int multiplier)
{
printk(KERN_INFO "setup_profiling_timer\n");
- return(0);
+ return 0;
}
void smp_call_function_slave(int cpu);
@@ -205,7 +204,7 @@
int hard_smp_processor_id(void)
{
- return(pid_to_processor_id(os_getpid()));
+ return pid_to_processor_id(os_getpid());
}
static DEFINE_SPINLOCK(call_lock);
@@ -254,14 +253,3 @@
}
#endif
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
diff --git a/arch/um/kernel/syscall.c b/arch/um/kernel/syscall.c
index 2828c52..237c4ea 100644
--- a/arch/um/kernel/syscall.c
+++ b/arch/um/kernel/syscall.c
@@ -18,7 +18,6 @@
#include "asm/mman.h"
#include "asm/uaccess.h"
#include "kern_util.h"
-#include "user_util.h"
#include "sysdep/syscalls.h"
#include "mode_kern.h"
#include "choose-mode.h"
diff --git a/arch/um/kernel/sysrq.c b/arch/um/kernel/sysrq.c
index f9e02b3..9326357 100644
--- a/arch/um/kernel/sysrq.c
+++ b/arch/um/kernel/sysrq.c
@@ -10,7 +10,6 @@
#include "asm/page.h"
#include "asm/processor.h"
#include "sysrq.h"
-#include "user_util.h"
/* Catch non-i386 SUBARCH's. */
#if !defined(CONFIG_UML_X86) || defined(CONFIG_64BIT)
diff --git a/arch/um/kernel/time.c b/arch/um/kernel/time.c
index b1f8b07..cd7349d 100644
--- a/arch/um/kernel/time.c
+++ b/arch/um/kernel/time.c
@@ -18,7 +18,6 @@
#include "asm/param.h"
#include "asm/current.h"
#include "kern_util.h"
-#include "user_util.h"
#include "mode.h"
#include "os.h"
@@ -35,8 +34,8 @@
return (unsigned long long)jiffies_64 * (1000000000 / HZ);
}
-static unsigned long long prev_nsecs[NR_CPUS];
#ifdef CONFIG_UML_REAL_TIME_CLOCK
+static unsigned long long prev_nsecs[NR_CPUS];
static long long delta[NR_CPUS]; /* Deviation per interval */
#endif
@@ -95,7 +94,12 @@
do_timer(1);
+#ifdef CONFIG_UML_REAL_TIME_CLOCK
nsecs = get_time();
+#else
+ nsecs = (unsigned long long) xtime.tv_sec * BILLION + xtime.tv_nsec +
+ BILLION / HZ;
+#endif
xtime.tv_sec = nsecs / NSEC_PER_SEC;
xtime.tv_nsec = nsecs - xtime.tv_sec * NSEC_PER_SEC;
@@ -128,13 +132,18 @@
nsecs = os_nsecs();
set_normalized_timespec(&wall_to_monotonic, -nsecs / BILLION,
-nsecs % BILLION);
+ set_normalized_timespec(&xtime, nsecs / BILLION, nsecs % BILLION);
late_time_init = register_timer;
}
void do_gettimeofday(struct timeval *tv)
{
+#ifdef CONFIG_UML_REAL_TIME_CLOCK
unsigned long long nsecs = get_time();
-
+#else
+ unsigned long long nsecs = (unsigned long long) xtime.tv_sec * BILLION +
+ xtime.tv_nsec;
+#endif
tv->tv_sec = nsecs / NSEC_PER_SEC;
/* Careful about calculations here - this was originally done as
* (nsecs - tv->tv_sec * NSEC_PER_SEC) / NSEC_PER_USEC
diff --git a/arch/um/kernel/tlb.c b/arch/um/kernel/tlb.c
index 54a5ff2..8a8d528 100644
--- a/arch/um/kernel/tlb.c
+++ b/arch/um/kernel/tlb.c
@@ -6,17 +6,18 @@
#include "linux/mm.h"
#include "asm/page.h"
#include "asm/pgalloc.h"
+#include "asm/pgtable.h"
#include "asm/tlbflush.h"
#include "choose-mode.h"
#include "mode_kern.h"
-#include "user_util.h"
+#include "as-layout.h"
#include "tlb.h"
#include "mem.h"
#include "mem_user.h"
#include "os.h"
static int add_mmap(unsigned long virt, unsigned long phys, unsigned long len,
- int r, int w, int x, struct host_vm_op *ops, int *index,
+ unsigned int prot, struct host_vm_op *ops, int *index,
int last_filled, union mm_context *mmu, void **flush,
int (*do_ops)(union mm_context *, struct host_vm_op *,
int, int, void **))
@@ -30,8 +31,7 @@
last = &ops[*index];
if((last->type == MMAP) &&
(last->u.mmap.addr + last->u.mmap.len == virt) &&
- (last->u.mmap.r == r) && (last->u.mmap.w == w) &&
- (last->u.mmap.x == x) && (last->u.mmap.fd == fd) &&
+ (last->u.mmap.prot == prot) && (last->u.mmap.fd == fd) &&
(last->u.mmap.offset + last->u.mmap.len == offset)){
last->u.mmap.len += len;
return 0;
@@ -47,9 +47,7 @@
.u = { .mmap = {
.addr = virt,
.len = len,
- .r = r,
- .w = w,
- .x = x,
+ .prot = prot,
.fd = fd,
.offset = offset }
} });
@@ -86,8 +84,8 @@
return ret;
}
-static int add_mprotect(unsigned long addr, unsigned long len, int r, int w,
- int x, struct host_vm_op *ops, int *index,
+static int add_mprotect(unsigned long addr, unsigned long len,
+ unsigned int prot, struct host_vm_op *ops, int *index,
int last_filled, union mm_context *mmu, void **flush,
int (*do_ops)(union mm_context *, struct host_vm_op *,
int, int, void **))
@@ -99,8 +97,7 @@
last = &ops[*index];
if((last->type == MPROTECT) &&
(last->u.mprotect.addr + last->u.mprotect.len == addr) &&
- (last->u.mprotect.r == r) && (last->u.mprotect.w == w) &&
- (last->u.mprotect.x == x)){
+ (last->u.mprotect.prot == prot)){
last->u.mprotect.len += len;
return 0;
}
@@ -115,114 +112,145 @@
.u = { .mprotect = {
.addr = addr,
.len = len,
- .r = r,
- .w = w,
- .x = x } } });
+ .prot = prot } } });
return ret;
}
#define ADD_ROUND(n, inc) (((n) + (inc)) & ~((inc) - 1))
+static inline int update_pte_range(pmd_t *pmd, unsigned long addr,
+ unsigned long end, struct host_vm_op *ops,
+ int last_op, int *op_index, int force,
+ union mm_context *mmu, void **flush,
+ int (*do_ops)(union mm_context *,
+ struct host_vm_op *, int, int,
+ void **))
+{
+ pte_t *pte;
+ int r, w, x, prot, ret = 0;
+
+ pte = pte_offset_kernel(pmd, addr);
+ do {
+ r = pte_read(*pte);
+ w = pte_write(*pte);
+ x = pte_exec(*pte);
+ if (!pte_young(*pte)) {
+ r = 0;
+ w = 0;
+ } else if (!pte_dirty(*pte)) {
+ w = 0;
+ }
+ prot = ((r ? UM_PROT_READ : 0) | (w ? UM_PROT_WRITE : 0) |
+ (x ? UM_PROT_EXEC : 0));
+ if(force || pte_newpage(*pte)){
+ if(pte_present(*pte))
+ ret = add_mmap(addr, pte_val(*pte) & PAGE_MASK,
+ PAGE_SIZE, prot, ops, op_index,
+ last_op, mmu, flush, do_ops);
+ else ret = add_munmap(addr, PAGE_SIZE, ops, op_index,
+ last_op, mmu, flush, do_ops);
+ }
+ else if(pte_newprot(*pte))
+ ret = add_mprotect(addr, PAGE_SIZE, prot, ops, op_index,
+ last_op, mmu, flush, do_ops);
+ *pte = pte_mkuptodate(*pte);
+ } while (pte++, addr += PAGE_SIZE, ((addr != end) && !ret));
+ return ret;
+}
+
+static inline int update_pmd_range(pud_t *pud, unsigned long addr,
+ unsigned long end, struct host_vm_op *ops,
+ int last_op, int *op_index, int force,
+ union mm_context *mmu, void **flush,
+ int (*do_ops)(union mm_context *,
+ struct host_vm_op *, int, int,
+ void **))
+{
+ pmd_t *pmd;
+ unsigned long next;
+ int ret = 0;
+
+ pmd = pmd_offset(pud, addr);
+ do {
+ next = pmd_addr_end(addr, end);
+ if(!pmd_present(*pmd)){
+ if(force || pmd_newpage(*pmd)){
+ ret = add_munmap(addr, next - addr, ops,
+ op_index, last_op, mmu,
+ flush, do_ops);
+ pmd_mkuptodate(*pmd);
+ }
+ }
+ else ret = update_pte_range(pmd, addr, next, ops, last_op,
+ op_index, force, mmu, flush,
+ do_ops);
+ } while (pmd++, addr = next, ((addr != end) && !ret));
+ return ret;
+}
+
+static inline int update_pud_range(pgd_t *pgd, unsigned long addr,
+ unsigned long end, struct host_vm_op *ops,
+ int last_op, int *op_index, int force,
+ union mm_context *mmu, void **flush,
+ int (*do_ops)(union mm_context *,
+ struct host_vm_op *, int, int,
+ void **))
+{
+ pud_t *pud;
+ unsigned long next;
+ int ret = 0;
+
+ pud = pud_offset(pgd, addr);
+ do {
+ next = pud_addr_end(addr, end);
+ if(!pud_present(*pud)){
+ if(force || pud_newpage(*pud)){
+ ret = add_munmap(addr, next - addr, ops,
+ op_index, last_op, mmu,
+ flush, do_ops);
+ pud_mkuptodate(*pud);
+ }
+ }
+ else ret = update_pmd_range(pud, addr, next, ops, last_op,
+ op_index, force, mmu, flush,
+ do_ops);
+ } while (pud++, addr = next, ((addr != end) && !ret));
+ return ret;
+}
+
void fix_range_common(struct mm_struct *mm, unsigned long start_addr,
unsigned long end_addr, int force,
int (*do_ops)(union mm_context *, struct host_vm_op *,
int, int, void **))
{
- pgd_t *npgd;
- pud_t *npud;
- pmd_t *npmd;
- pte_t *npte;
+ pgd_t *pgd;
union mm_context *mmu = &mm->context;
- unsigned long addr, end;
- int r, w, x;
struct host_vm_op ops[1];
+ unsigned long addr = start_addr, next;
+ int ret = 0, last_op = ARRAY_SIZE(ops) - 1, op_index = -1;
void *flush = NULL;
- int op_index = -1, last_op = ARRAY_SIZE(ops) - 1;
- int ret = 0;
-
- if(mm == NULL)
- return;
ops[0].type = NONE;
- for(addr = start_addr; addr < end_addr && !ret;){
- npgd = pgd_offset(mm, addr);
- if(!pgd_present(*npgd)){
- end = ADD_ROUND(addr, PGDIR_SIZE);
- if(end > end_addr)
- end = end_addr;
- if(force || pgd_newpage(*npgd)){
- ret = add_munmap(addr, end - addr, ops,
+ pgd = pgd_offset(mm, addr);
+ do {
+ next = pgd_addr_end(addr, end_addr);
+ if(!pgd_present(*pgd)){
+ if (force || pgd_newpage(*pgd)){
+ ret = add_munmap(addr, next - addr, ops,
&op_index, last_op, mmu,
&flush, do_ops);
- pgd_mkuptodate(*npgd);
+ pgd_mkuptodate(*pgd);
}
- addr = end;
- continue;
}
+ else ret = update_pud_range(pgd, addr, next, ops, last_op,
+ &op_index, force, mmu, &flush,
+ do_ops);
+ } while (pgd++, addr = next, ((addr != end_addr) && !ret));
- npud = pud_offset(npgd, addr);
- if(!pud_present(*npud)){
- end = ADD_ROUND(addr, PUD_SIZE);
- if(end > end_addr)
- end = end_addr;
- if(force || pud_newpage(*npud)){
- ret = add_munmap(addr, end - addr, ops,
- &op_index, last_op, mmu,
- &flush, do_ops);
- pud_mkuptodate(*npud);
- }
- addr = end;
- continue;
- }
-
- npmd = pmd_offset(npud, addr);
- if(!pmd_present(*npmd)){
- end = ADD_ROUND(addr, PMD_SIZE);
- if(end > end_addr)
- end = end_addr;
- if(force || pmd_newpage(*npmd)){
- ret = add_munmap(addr, end - addr, ops,
- &op_index, last_op, mmu,
- &flush, do_ops);
- pmd_mkuptodate(*npmd);
- }
- addr = end;
- continue;
- }
-
- npte = pte_offset_kernel(npmd, addr);
- r = pte_read(*npte);
- w = pte_write(*npte);
- x = pte_exec(*npte);
- if (!pte_young(*npte)) {
- r = 0;
- w = 0;
- } else if (!pte_dirty(*npte)) {
- w = 0;
- }
- if(force || pte_newpage(*npte)){
- if(pte_present(*npte))
- ret = add_mmap(addr,
- pte_val(*npte) & PAGE_MASK,
- PAGE_SIZE, r, w, x, ops,
- &op_index, last_op, mmu,
- &flush, do_ops);
- else ret = add_munmap(addr, PAGE_SIZE, ops,
- &op_index, last_op, mmu,
- &flush, do_ops);
- }
- else if(pte_newprot(*npte))
- ret = add_mprotect(addr, PAGE_SIZE, r, w, x, ops,
- &op_index, last_op, mmu,
- &flush, do_ops);
-
- *npte = pte_mkuptodate(*npte);
- addr += PAGE_SIZE;
- }
if(!ret)
ret = (*do_ops)(mmu, ops, op_index, 1, &flush);
-/* This is not an else because ret is modified above */
+ /* This is not an else because ret is modified above */
if(ret) {
printk("fix_range_common: failed, killing current process\n");
force_sig(SIGKILL, current);
@@ -343,12 +371,6 @@
return(pte_offset_map(pmd, addr));
}
-void flush_tlb_page(struct vm_area_struct *vma, unsigned long address)
-{
- address &= PAGE_MASK;
- flush_tlb_range(vma, address, address + PAGE_SIZE);
-}
-
void flush_tlb_all(void)
{
flush_tlb_mm(current->mm);
diff --git a/arch/um/kernel/trap.c b/arch/um/kernel/trap.c
index 26f15c4..abab90c 100644
--- a/arch/um/kernel/trap.c
+++ b/arch/um/kernel/trap.c
@@ -18,8 +18,9 @@
#include "asm/current.h"
#include "asm/irq.h"
#include "sysdep/sigcontext.h"
-#include "user_util.h"
#include "kern_util.h"
+#include "as-layout.h"
+#include "arch.h"
#include "kern.h"
#include "chan_kern.h"
#include "mconsole_kern.h"
@@ -71,8 +72,8 @@
goto out;
/* Don't require VM_READ|VM_EXEC for write faults! */
- if(!is_write && !(vma->vm_flags & (VM_READ | VM_EXEC)))
- goto out;
+ if(!is_write && !(vma->vm_flags & (VM_READ | VM_EXEC)))
+ goto out;
do {
survive:
@@ -156,20 +157,23 @@
* the info in the regs. A pointer to the info then would
* give us bad data!
*/
-unsigned long segv(struct faultinfo fi, unsigned long ip, int is_user, void *sc)
+unsigned long segv(struct faultinfo fi, unsigned long ip, int is_user,
+ union uml_pt_regs *regs)
{
struct siginfo si;
void *catcher;
int err;
- int is_write = FAULT_WRITE(fi);
- unsigned long address = FAULT_ADDRESS(fi);
+ int is_write = FAULT_WRITE(fi);
+ unsigned long address = FAULT_ADDRESS(fi);
- if(!is_user && (address >= start_vm) && (address < end_vm)){
- flush_tlb_kernel_vm();
- return(0);
- }
- else if(current->mm == NULL)
- panic("Segfault with no mm");
+ if(!is_user && (address >= start_vm) && (address < end_vm)){
+ flush_tlb_kernel_vm();
+ return 0;
+ }
+ else if(current->mm == NULL) {
+ show_regs(container_of(regs, struct pt_regs, regs));
+ panic("Segfault with no mm");
+ }
if (SEGV_IS_FIXABLE(&fi) || SEGV_MAYBE_FIXABLE(&fi))
err = handle_page_fault(address, ip, is_write, is_user, &si.si_code);
@@ -182,26 +186,28 @@
catcher = current->thread.fault_catcher;
if(!err)
- return(0);
+ return 0;
else if(catcher != NULL){
current->thread.fault_addr = (void *) address;
do_longjmp(catcher, 1);
}
else if(current->thread.fault_addr != NULL)
panic("fault_addr set but no fault catcher");
- else if(!is_user && arch_fixup(ip, sc))
- return(0);
+ else if(!is_user && arch_fixup(ip, regs))
+ return 0;
- if(!is_user)
+ if(!is_user) {
+ show_regs(container_of(regs, struct pt_regs, regs));
panic("Kernel mode fault at addr 0x%lx, ip 0x%lx",
address, ip);
+ }
if (err == -EACCES) {
si.si_signo = SIGBUS;
si.si_errno = 0;
si.si_code = BUS_ADRERR;
si.si_addr = (void __user *)address;
- current->thread.arch.faultinfo = fi;
+ current->thread.arch.faultinfo = fi;
force_sig_info(SIGBUS, &si, current);
} else if (err == -ENOMEM) {
printk("VM: killing process %s\n", current->comm);
@@ -210,10 +216,10 @@
BUG_ON(err != -EFAULT);
si.si_signo = SIGSEGV;
si.si_addr = (void __user *) address;
- current->thread.arch.faultinfo = fi;
+ current->thread.arch.faultinfo = fi;
force_sig_info(SIGSEGV, &si, current);
}
- return(0);
+ return 0;
}
void relay_signal(int sig, union uml_pt_regs *regs)
@@ -223,12 +229,12 @@
if(!UPT_IS_USER(regs)){
if(sig == SIGBUS)
- printk("Bus error - the /dev/shm or /tmp mount likely "
- "just ran out of space\n");
+ printk("Bus error - the host /dev/shm or /tmp mount "
+ "likely just ran out of space\n");
panic("Kernel mode signal %d", sig);
}
- current->thread.arch.faultinfo = *UPT_FAULTINFO(regs);
+ current->thread.arch.faultinfo = *UPT_FAULTINFO(regs);
force_sig(sig, current);
}
diff --git a/arch/um/kernel/tt/exec_kern.c b/arch/um/kernel/tt/exec_kern.c
index ad66df1..98e2174 100644
--- a/arch/um/kernel/tt/exec_kern.c
+++ b/arch/um/kernel/tt/exec_kern.c
@@ -10,7 +10,6 @@
#include "asm/uaccess.h"
#include "asm/pgalloc.h"
#include "asm/tlbflush.h"
-#include "user_util.h"
#include "kern_util.h"
#include "irq_user.h"
#include "mem_user.h"
diff --git a/arch/um/kernel/tt/exec_user.c b/arch/um/kernel/tt/exec_user.c
index a92c02f..7b5f218 100644
--- a/arch/um/kernel/tt/exec_user.c
+++ b/arch/um/kernel/tt/exec_user.c
@@ -10,7 +10,6 @@
#include <errno.h>
#include <sys/wait.h>
#include <signal.h>
-#include "user_util.h"
#include "kern_util.h"
#include "user.h"
#include "ptrace_user.h"
diff --git a/arch/um/kernel/tt/gdb.c b/arch/um/kernel/tt/gdb.c
index 8eba8f7..030e465 100644
--- a/arch/um/kernel/tt/gdb.c
+++ b/arch/um/kernel/tt/gdb.c
@@ -17,7 +17,6 @@
#include "user.h"
#include "debug.h"
#include "kern_util.h"
-#include "user_util.h"
#include "tt.h"
#include "sysdep/thread.h"
#include "os.h"
@@ -115,6 +114,8 @@
int err;
};
+extern char *linux_prog;
+
static void config_gdb_cb(void *arg)
{
struct gdb_data *data = arg;
diff --git a/arch/um/kernel/tt/include/mode_kern-tt.h b/arch/um/kernel/tt/include/mode_kern-tt.h
deleted file mode 100644
index 2a35b15..0000000
--- a/arch/um/kernel/tt/include/mode_kern-tt.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * Copyright (C) 2002 Jeff Dike (jdike@karaya.com)
- * Licensed under the GPL
- */
-
-#ifndef __TT_MODE_KERN_H__
-#define __TT_MODE_KERN_H__
-
-#include "linux/sched.h"
-#include "asm/page.h"
-#include "asm/ptrace.h"
-#include "asm/uaccess.h"
-
-extern void switch_to_tt(void *prev, void *next);
-extern void flush_thread_tt(void);
-extern void start_thread_tt(struct pt_regs *regs, unsigned long eip,
- unsigned long esp);
-extern int copy_thread_tt(int nr, unsigned long clone_flags, unsigned long sp,
- unsigned long stack_top, struct task_struct *p,
- struct pt_regs *regs);
-extern void release_thread_tt(struct task_struct *task);
-extern void initial_thread_cb_tt(void (*proc)(void *), void *arg);
-extern void init_idle_tt(void);
-extern void flush_tlb_kernel_range_tt(unsigned long start, unsigned long end);
-extern void flush_tlb_kernel_vm_tt(void);
-extern void __flush_tlb_one_tt(unsigned long addr);
-extern void flush_tlb_range_tt(struct vm_area_struct *vma,
- unsigned long start, unsigned long end);
-extern void flush_tlb_mm_tt(struct mm_struct *mm);
-extern void force_flush_all_tt(void);
-extern long execute_syscall_tt(void *r);
-extern void before_mem_tt(unsigned long brk_start);
-extern unsigned long set_task_sizes_tt(int arg, unsigned long *host_size_out,
- unsigned long *task_size_out);
-extern int start_uml_tt(void);
-extern int external_pid_tt(struct task_struct *task);
-extern int thread_pid_tt(struct task_struct *task);
-
-#define kmem_end_tt (host_task_size - ABOVE_KMEM)
-
-#endif
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
diff --git a/arch/um/kernel/tt/mem.c b/arch/um/kernel/tt/mem.c
index 4d1929d..d0c3c49 100644
--- a/arch/um/kernel/tt/mem.c
+++ b/arch/um/kernel/tt/mem.c
@@ -8,7 +8,6 @@
#include "asm/uaccess.h"
#include "mem_user.h"
#include "kern_util.h"
-#include "user_util.h"
#include "kern.h"
#include "tt.h"
diff --git a/arch/um/kernel/tt/mem_user.c b/arch/um/kernel/tt/mem_user.c
index 03e5898..9774f63 100644
--- a/arch/um/kernel/tt/mem_user.c
+++ b/arch/um/kernel/tt/mem_user.c
@@ -11,7 +11,6 @@
#include <sys/mman.h>
#include "tt.h"
#include "mem_user.h"
-#include "user_util.h"
#include "os.h"
void remap_data(void *segment_start, void *segment_end, int w)
diff --git a/arch/um/kernel/tt/process_kern.c b/arch/um/kernel/tt/process_kern.c
index 1e86f0b..c631303 100644
--- a/arch/um/kernel/tt/process_kern.c
+++ b/arch/um/kernel/tt/process_kern.c
@@ -14,7 +14,6 @@
#include "asm/tlbflush.h"
#include "irq_user.h"
#include "kern_util.h"
-#include "user_util.h"
#include "os.h"
#include "kern.h"
#include "sigcontext.h"
@@ -65,7 +64,8 @@
if(from->thread.mode.tt.switch_pipe[0] == -1)
os_kill_process(os_getpid(), 0);
- err = os_read_file(from->thread.mode.tt.switch_pipe[0], &c, sizeof(c));
+ err = os_read_file(from->thread.mode.tt.switch_pipe[0], &c,
+ sizeof(c));
if(err != sizeof(c))
panic("read of switch_pipe failed, errno = %d", -err);
diff --git a/arch/um/kernel/tt/ptproxy/proxy.c b/arch/um/kernel/tt/ptproxy/proxy.c
index 58800c5..420c23f 100644
--- a/arch/um/kernel/tt/ptproxy/proxy.c
+++ b/arch/um/kernel/tt/ptproxy/proxy.c
@@ -26,7 +26,6 @@
#include "sysdep.h"
#include "wait.h"
-#include "user_util.h"
#include "user.h"
#include "os.h"
#include "tempfile.h"
@@ -339,11 +338,12 @@
"err = %d\n", -fd);
exit(1);
}
- os_write_file(fd, gdb_init_string, sizeof(gdb_init_string) - 1);
+ os_write_file(fd, gdb_init_string,
+ sizeof(gdb_init_string) - 1);
if(startup){
if(stop){
os_write_file(fd, "b start_kernel\n",
- strlen("b start_kernel\n"));
+ strlen("b start_kernel\n"));
}
os_write_file(fd, "c\n", strlen("c\n"));
}
diff --git a/arch/um/kernel/tt/ptproxy/ptrace.c b/arch/um/kernel/tt/ptproxy/ptrace.c
index 0377442..4b4f617 100644
--- a/arch/um/kernel/tt/ptproxy/ptrace.c
+++ b/arch/um/kernel/tt/ptproxy/ptrace.c
@@ -16,7 +16,6 @@
#include "ptproxy.h"
#include "debug.h"
-#include "user_util.h"
#include "kern_util.h"
#include "ptrace_user.h"
#include "tt.h"
diff --git a/arch/um/kernel/tt/ptproxy/sysdep.c b/arch/um/kernel/tt/ptproxy/sysdep.c
index 99f1783..e0e1ab0 100644
--- a/arch/um/kernel/tt/ptproxy/sysdep.c
+++ b/arch/um/kernel/tt/ptproxy/sysdep.c
@@ -13,7 +13,6 @@
#include <sys/types.h>
#include <linux/unistd.h>
#include "ptrace_user.h"
-#include "user_util.h"
#include "user.h"
#include "os.h"
diff --git a/arch/um/kernel/tt/ptproxy/wait.c b/arch/um/kernel/tt/ptproxy/wait.c
index 12f6319..bdd4af4 100644
--- a/arch/um/kernel/tt/ptproxy/wait.c
+++ b/arch/um/kernel/tt/ptproxy/wait.c
@@ -13,7 +13,6 @@
#include "ptproxy.h"
#include "sysdep.h"
#include "wait.h"
-#include "user_util.h"
#include "ptrace_user.h"
#include "sysdep/ptrace.h"
#include "sysdep/sigcontext.h"
diff --git a/arch/um/kernel/tt/syscall_user.c b/arch/um/kernel/tt/syscall_user.c
index 902987b..f52b47a 100644
--- a/arch/um/kernel/tt/syscall_user.c
+++ b/arch/um/kernel/tt/syscall_user.c
@@ -11,7 +11,6 @@
#include "sigcontext.h"
#include "ptrace_user.h"
#include "task.h"
-#include "user_util.h"
#include "kern_util.h"
#include "syscall.h"
#include "tt.h"
diff --git a/arch/um/kernel/tt/tlb.c b/arch/um/kernel/tt/tlb.c
index ae6217c..7caa24f 100644
--- a/arch/um/kernel/tt/tlb.c
+++ b/arch/um/kernel/tt/tlb.c
@@ -12,7 +12,6 @@
#include "asm/pgtable.h"
#include "asm/uaccess.h"
#include "asm/tlbflush.h"
-#include "user_util.h"
#include "mem_user.h"
#include "os.h"
#include "tlb.h"
diff --git a/arch/um/kernel/tt/tracer.c b/arch/um/kernel/tt/tracer.c
index b919535..c235883 100644
--- a/arch/um/kernel/tt/tracer.c
+++ b/arch/um/kernel/tt/tracer.c
@@ -19,7 +19,6 @@
#include "sigcontext.h"
#include "sysdep/sigcontext.h"
#include "os.h"
-#include "user_util.h"
#include "mem_user.h"
#include "process.h"
#include "kern_util.h"
diff --git a/arch/um/kernel/tt/trap_user.c b/arch/um/kernel/tt/trap_user.c
index b5d9d64..3032eb5 100644
--- a/arch/um/kernel/tt/trap_user.c
+++ b/arch/um/kernel/tt/trap_user.c
@@ -8,7 +8,6 @@
#include <signal.h>
#include "sysdep/ptrace.h"
#include "sysdep/sigcontext.h"
-#include "user_util.h"
#include "kern_util.h"
#include "task.h"
#include "tt.h"
diff --git a/arch/um/kernel/tt/uaccess_user.c b/arch/um/kernel/tt/uaccess_user.c
index ed1abcf..0e5c82c 100644
--- a/arch/um/kernel/tt/uaccess_user.c
+++ b/arch/um/kernel/tt/uaccess_user.c
@@ -5,7 +5,6 @@
*/
#include <string.h>
-#include "user_util.h"
#include "uml_uaccess.h"
#include "task.h"
#include "kern_util.h"
diff --git a/arch/um/kernel/um_arch.c b/arch/um/kernel/um_arch.c
index 89c6dba..1cf954a 100644
--- a/arch/um/kernel/um_arch.c
+++ b/arch/um/kernel/um_arch.c
@@ -17,6 +17,7 @@
#include "linux/seq_file.h"
#include "linux/delay.h"
#include "linux/module.h"
+#include "linux/utsname.h"
#include "asm/page.h"
#include "asm/pgtable.h"
#include "asm/ptrace.h"
@@ -25,8 +26,9 @@
#include "asm/setup.h"
#include "ubd_user.h"
#include "asm/current.h"
-#include "user_util.h"
#include "kern_util.h"
+#include "as-layout.h"
+#include "arch.h"
#include "kern.h"
#include "mem_user.h"
#include "mem.h"
@@ -42,7 +44,7 @@
#define DEFAULT_COMMAND_LINE "root=98:0"
-/* Changed in linux_main and setup_arch, which run before SMP is started */
+/* Changed in add_arg and setup_arch, which run before SMP is started */
static char __initdata command_line[COMMAND_LINE_SIZE] = { 0 };
static void __init add_arg(char *arg)
@@ -56,17 +58,25 @@
strcat(command_line, arg);
}
-struct cpuinfo_um boot_cpu_data = {
+/*
+ * These fields are initialized at boot time and not changed.
+ * XXX This structure is used only in the non-SMP case. Maybe this
+ * should be moved to smp.c.
+ */
+struct cpuinfo_um boot_cpu_data = {
.loops_per_jiffy = 0,
.ipi_pipe = { -1, -1 }
};
unsigned long thread_saved_pc(struct task_struct *task)
{
- return(os_process_pc(CHOOSE_MODE_PROC(thread_pid_tt, thread_pid_skas,
- task)));
+ return os_process_pc(CHOOSE_MODE_PROC(thread_pid_tt, thread_pid_skas,
+ task));
}
+/* Changed in setup_arch, which is called in early boot */
+static char host_info[(__NEW_UTS_LEN + 1) * 5];
+
static int show_cpuinfo(struct seq_file *m, void *v)
{
int index = 0;
@@ -86,7 +96,7 @@
loops_per_jiffy/(500000/HZ),
(loops_per_jiffy/(5000/HZ)) % 100);
- return(0);
+ return 0;
}
static void *c_start(struct seq_file *m, loff_t *pos)
@@ -114,14 +124,12 @@
/* Set in linux_main */
unsigned long host_task_size;
unsigned long task_size;
-
-unsigned long uml_start;
-
-/* Set in early boot */
unsigned long uml_physmem;
-unsigned long uml_reserved;
+unsigned long uml_reserved; /* Also modified in mem_init */
unsigned long start_vm;
unsigned long end_vm;
+
+/* Set in uml_ncpus_setup */
int ncpus = 1;
#ifdef CONFIG_CMDLINE_ON_HOST
@@ -135,6 +143,8 @@
/* Set in early boot */
static int have_root __initdata = 0;
+
+/* Set in uml_mem_setup and modified in linux_main */
long long physmem_size = 32 * 1024 * 1024;
void set_cmdline(char *cmd)
@@ -212,12 +222,12 @@
#ifdef CONFIG_SMP
static int __init uml_ncpus_setup(char *line, int *add)
{
- if (!sscanf(line, "%d", &ncpus)) {
- printf("Couldn't parse [%s]\n", line);
- return -1;
- }
+ if (!sscanf(line, "%d", &ncpus)) {
+ printf("Couldn't parse [%s]\n", line);
+ return -1;
+ }
- return 0;
+ return 0;
}
__uml_setup("ncpus=", uml_ncpus_setup,
@@ -234,7 +244,7 @@
static int __init mode_tt_setup(char *line, int *add)
{
force_tt = 1;
- return(0);
+ return 0;
}
#else
@@ -245,7 +255,7 @@
static int __init mode_tt_setup(char *line, int *add)
{
printf("CONFIG_MODE_TT disabled - 'mode=tt' ignored\n");
- return(0);
+ return 0;
}
#else
@@ -256,7 +266,7 @@
static int __init mode_tt_setup(char *line, int *add)
{
printf("CONFIG_MODE_SKAS disabled - 'mode=tt' redundant\n");
- return(0);
+ return 0;
}
#endif
@@ -274,16 +284,15 @@
static int __init Usage(char *line, int *add)
{
- const char **p;
+ const char **p;
printf(usage_string, init_utsname()->release);
- p = &__uml_help_start;
- while (p < &__uml_help_end) {
- printf("%s", *p);
- p++;
- }
+ p = &__uml_help_start;
+ while (p < &__uml_help_end) {
+ printf("%s", *p);
+ p++;
+ }
exit(0);
-
return 0;
}
@@ -374,13 +383,12 @@
printf("UML running in %s mode\n", mode);
- uml_start = (unsigned long) &__binary_start;
host_task_size = CHOOSE_MODE_PROC(set_task_sizes_tt,
set_task_sizes_skas, &task_size);
/*
- * Setting up handlers to 'sig_info' struct
- */
+ * Setting up handlers to 'sig_info' struct
+ */
os_fill_handlinfo(handlinfo_kern);
brk_start = (unsigned long) sbrk(0);
@@ -396,7 +404,7 @@
physmem_size += UML_ROUND_UP(brk_start) - UML_ROUND_UP(&_end);
}
- uml_physmem = uml_start & PAGE_MASK;
+ uml_physmem = (unsigned long) &__binary_start & PAGE_MASK;
/* Reserve up to 4M after the current brk */
uml_reserved = ROUND_4M(brk_start) + (1 << 22);
@@ -407,7 +415,7 @@
argv1_begin = argv[1];
argv1_end = &argv[1][strlen(argv[1])];
#endif
-
+
highmem = 0;
iomem_size = (iomem_size + PAGE_SIZE - 1) & PAGE_MASK;
max_physmem = get_kmem_end() - uml_physmem - iomem_size - MIN_VMALLOC;
@@ -449,12 +457,12 @@
printf("Kernel virtual memory size shrunk to %lu bytes\n",
virtmem_size);
- uml_postsetup();
+ uml_postsetup();
task_protections((unsigned long) &init_thread_info);
os_flush_stdout();
- return(CHOOSE_MODE(start_uml_tt(), start_uml_skas()));
+ return CHOOSE_MODE(start_uml_tt(), start_uml_skas());
}
extern int uml_exitcode;
@@ -466,8 +474,8 @@
show_regs(&(current->thread.regs));
bust_spinlocks(0);
uml_exitcode = 1;
- machine_halt();
- return(0);
+ os_dump_core();
+ return 0;
}
static struct notifier_block panic_exit_notifier = {
@@ -482,14 +490,14 @@
&panic_exit_notifier);
paging_init();
strlcpy(boot_command_line, command_line, COMMAND_LINE_SIZE);
- *cmdline_p = command_line;
- setup_hostinfo();
+ *cmdline_p = command_line;
+ setup_hostinfo(host_info, sizeof host_info);
}
void __init check_bugs(void)
{
arch_check_bugs();
- os_check_bugs();
+ os_check_bugs();
}
void apply_alternatives(struct alt_instr *start, struct alt_instr *end)
diff --git a/arch/um/os-Linux/aio.c b/arch/um/os-Linux/aio.c
index 6ff1274..9bf944f 100644
--- a/arch/um/os-Linux/aio.c
+++ b/arch/um/os-Linux/aio.c
@@ -132,10 +132,10 @@
{ .data = (void *) (long) event.data,
.err = event.res });
reply_fd = ((struct aio_context *) reply.data)->reply_fd;
- err = os_write_file(reply_fd, &reply, sizeof(reply));
+ err = write(reply_fd, &reply, sizeof(reply));
if(err != sizeof(reply))
printk("aio_thread - write failed, fd = %d, "
- "err = %d\n", reply_fd, -err);
+ "err = %d\n", reply_fd, errno);
}
}
return 0;
@@ -146,38 +146,31 @@
static int do_not_aio(struct aio_thread_req *req)
{
char c;
- int err;
+ unsigned long long actual;
+ int n;
+
+ actual = lseek64(req->io_fd, req->offset, SEEK_SET);
+ if(actual != req->offset)
+ return -errno;
switch(req->type){
case AIO_READ:
- err = os_seek_file(req->io_fd, req->offset);
- if(err)
- goto out;
-
- err = os_read_file(req->io_fd, req->buf, req->len);
+ n = read(req->io_fd, req->buf, req->len);
break;
case AIO_WRITE:
- err = os_seek_file(req->io_fd, req->offset);
- if(err)
- goto out;
-
- err = os_write_file(req->io_fd, req->buf, req->len);
+ n = write(req->io_fd, req->buf, req->len);
break;
case AIO_MMAP:
- err = os_seek_file(req->io_fd, req->offset);
- if(err)
- goto out;
-
- err = os_read_file(req->io_fd, &c, sizeof(c));
+ n = read(req->io_fd, &c, sizeof(c));
break;
default:
printk("do_not_aio - bad request type : %d\n", req->type);
- err = -EINVAL;
- break;
+ return -EINVAL;
}
-out:
- return err;
+ if(n < 0)
+ return -errno;
+ return 0;
}
/* These are initialized in initcalls and not changed */
@@ -193,12 +186,12 @@
signal(SIGWINCH, SIG_IGN);
while(1){
- err = os_read_file(aio_req_fd_r, &req, sizeof(req));
+ err = read(aio_req_fd_r, &req, sizeof(req));
if(err != sizeof(req)){
if(err < 0)
printk("not_aio_thread - read failed, "
"fd = %d, err = %d\n", aio_req_fd_r,
- -err);
+ errno);
else {
printk("not_aio_thread - short read, fd = %d, "
"length = %d\n", aio_req_fd_r, err);
@@ -207,11 +200,11 @@
}
err = do_not_aio(&req);
reply = ((struct aio_thread_reply) { .data = req.aio,
- .err = err });
- err = os_write_file(req.aio->reply_fd, &reply, sizeof(reply));
+ .err = err });
+ err = write(req.aio->reply_fd, &reply, sizeof(reply));
if(err != sizeof(reply))
printk("not_aio_thread - write failed, fd = %d, "
- "err = %d\n", req.aio->reply_fd, -err);
+ "err = %d\n", req.aio->reply_fd, errno);
}
return 0;
@@ -228,6 +221,11 @@
aio_req_fd_w = fds[0];
aio_req_fd_r = fds[1];
+
+ err = os_set_fd_block(aio_req_fd_w, 0);
+ if(err)
+ goto out_close_pipe;
+
err = run_helper_thread(not_aio_thread, NULL,
CLONE_FILES | CLONE_VM | SIGCHLD, &stack, 0);
if(err < 0)
@@ -285,10 +283,12 @@
if(err){
reply = ((struct aio_thread_reply) { .data = aio,
.err = err });
- err = os_write_file(aio->reply_fd, &reply, sizeof(reply));
- if(err != sizeof(reply))
+ err = write(aio->reply_fd, &reply, sizeof(reply));
+ if(err != sizeof(reply)){
+ err = -errno;
printk("submit_aio_26 - write failed, "
"fd = %d, err = %d\n", aio->reply_fd, -err);
+ }
else err = 0;
}
@@ -383,9 +383,10 @@
};
int err;
- err = os_write_file(aio_req_fd_w, &req, sizeof(req));
+ err = write(aio_req_fd_w, &req, sizeof(req));
if(err == sizeof(req))
err = 0;
+ else err = -errno;
return err;
}
diff --git a/arch/um/os-Linux/drivers/ethertap_user.c b/arch/um/os-Linux/drivers/ethertap_user.c
index 863981b..acba301 100644
--- a/arch/um/os-Linux/drivers/ethertap_user.c
+++ b/arch/um/os-Linux/drivers/ethertap_user.c
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2001 Lennert Buytenhek (buytenh@gnu.org) and
+ * Copyright (C) 2001 Lennert Buytenhek (buytenh@gnu.org) and
* James Leu (jleu@mindspring.net).
* Copyright (C) 2001 by various other people who didn't put their name here.
* Licensed under the GPL.
@@ -16,19 +16,20 @@
#include <net/if.h>
#include "user.h"
#include "kern_util.h"
-#include "user_util.h"
#include "net_user.h"
#include "etap.h"
#include "os.h"
#include "um_malloc.h"
+#include "kern_constants.h"
#define MAX_PACKET ETH_MAX_PACKET
-void etap_user_init(void *data, void *dev)
+static int etap_user_init(void *data, void *dev)
{
struct ethertap_data *pri = data;
pri->dev = dev;
+ return 0;
}
struct addr_change {
@@ -47,13 +48,16 @@
change.what = op;
memcpy(change.addr, addr, sizeof(change.addr));
memcpy(change.netmask, netmask, sizeof(change.netmask));
- n = os_write_file(fd, &change, sizeof(change));
- if(n != sizeof(change))
- printk("etap_change - request failed, err = %d\n", -n);
- output = um_kmalloc(page_size());
+ CATCH_EINTR(n = write(fd, &change, sizeof(change)));
+ if(n != sizeof(change)){
+ printk("etap_change - request failed, err = %d\n", errno);
+ return;
+ }
+
+ output = um_kmalloc(UM_KERN_PAGE_SIZE);
if(output == NULL)
printk("etap_change : Failed to allocate output buffer\n");
- read_output(fd, output, page_size());
+ read_output(fd, output, UM_KERN_PAGE_SIZE);
if(output != NULL){
printk("%s", output);
kfree(output);
@@ -115,13 +119,15 @@
pe_data.data_me = data_me;
pid = run_helper(etap_pre_exec, &pe_data, args, NULL);
- if(pid < 0) err = pid;
+ if(pid < 0)
+ err = pid;
os_close_file(data_remote);
os_close_file(control_remote);
- n = os_read_file(control_me, &c, sizeof(c));
+ CATCH_EINTR(n = read(control_me, &c, sizeof(c)));
if(n != sizeof(c)){
- printk("etap_tramp : read of status failed, err = %d\n", -n);
- return(-EINVAL);
+ err = -errno;
+ printk("etap_tramp : read of status failed, err = %d\n", -err);
+ return err;
}
if(c != 1){
printk("etap_tramp : uml_net failed\n");
@@ -132,7 +138,7 @@
else if(!WIFEXITED(status) || (WEXITSTATUS(status) != 1))
printk("uml_net didn't exit with status 1\n");
}
- return(err);
+ return err;
}
static int etap_open(void *data)
@@ -142,23 +148,24 @@
int data_fds[2], control_fds[2], err, output_len;
err = tap_open_common(pri->dev, pri->gate_addr);
- if(err) return(err);
+ if(err)
+ return err;
err = os_pipe(data_fds, 0, 0);
if(err < 0){
printk("data os_pipe failed - err = %d\n", -err);
- return(err);
+ return err;
}
err = os_pipe(control_fds, 1, 0);
if(err < 0){
printk("control os_pipe failed - err = %d\n", -err);
- return(err);
+ return err;
}
-
+
err = etap_tramp(pri->dev_name, pri->gate_addr, control_fds[0],
control_fds[1], data_fds[0], data_fds[1]);
- output_len = page_size();
+ output_len = UM_KERN_PAGE_SIZE;
output = um_kmalloc(output_len);
read_output(control_fds[0], output, output_len);
@@ -171,13 +178,13 @@
if(err < 0){
printk("etap_tramp failed - err = %d\n", -err);
- return(err);
+ return err;
}
pri->data_fd = data_fds[0];
pri->control_fd = control_fds[0];
iter_addresses(pri->dev, etap_open_addr, &pri->control_fd);
- return(data_fds[0]);
+ return data_fds[0];
}
static void etap_close(int fd, void *data)
@@ -195,7 +202,7 @@
static int etap_set_mtu(int mtu, void *data)
{
- return(mtu);
+ return mtu;
}
static void etap_add_addr(unsigned char *addr, unsigned char *netmask,
@@ -204,7 +211,8 @@
struct ethertap_data *pri = data;
tap_check_ips(pri->gate_addr, addr);
- if(pri->control_fd == -1) return;
+ if(pri->control_fd == -1)
+ return;
etap_open_addr(addr, netmask, &pri->control_fd);
}
@@ -213,7 +221,8 @@
{
struct ethertap_data *pri = data;
- if(pri->control_fd == -1) return;
+ if(pri->control_fd == -1)
+ return;
etap_close_addr(addr, netmask, &pri->control_fd);
}
@@ -227,14 +236,3 @@
.delete_address = etap_del_addr,
.max_packet = MAX_PACKET - ETH_HEADER_ETHERTAP
};
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
diff --git a/arch/um/os-Linux/drivers/tuntap_user.c b/arch/um/os-Linux/drivers/tuntap_user.c
index e846b23..11a9779 100644
--- a/arch/um/os-Linux/drivers/tuntap_user.c
+++ b/arch/um/os-Linux/drivers/tuntap_user.c
@@ -18,17 +18,17 @@
#include "net_user.h"
#include "tuntap.h"
#include "kern_util.h"
-#include "user_util.h"
#include "user.h"
#include "os.h"
#define MAX_PACKET ETH_MAX_PACKET
-void tuntap_user_init(void *data, void *dev)
+static int tuntap_user_init(void *data, void *dev)
{
struct tuntap_data *pri = data;
pri->dev = dev;
+ return 0;
}
static void tuntap_add_addr(unsigned char *addr, unsigned char *netmask,
@@ -37,7 +37,8 @@
struct tuntap_data *pri = data;
tap_check_ips(pri->gate_addr, addr);
- if((pri->fd == -1) || pri->fixed_config) return;
+ if((pri->fd == -1) || pri->fixed_config)
+ return;
open_addr(addr, netmask, pri->dev_name);
}
@@ -46,7 +47,8 @@
{
struct tuntap_data *pri = data;
- if((pri->fd == -1) || pri->fixed_config) return;
+ if((pri->fd == -1) || pri->fixed_config)
+ return;
close_addr(addr, netmask, pri->dev_name);
}
@@ -58,7 +60,7 @@
static void tuntap_pre_exec(void *arg)
{
struct tuntap_pre_exec_data *data = arg;
-
+
dup2(data->stdout, 1);
os_close_file(data->close_me);
}
@@ -83,7 +85,8 @@
pid = run_helper(tuntap_pre_exec, &data, argv, NULL);
- if(pid < 0) return(-pid);
+ if(pid < 0)
+ return -pid;
os_close_file(remote);
@@ -114,16 +117,16 @@
cmsg = CMSG_FIRSTHDR(&msg);
if(cmsg == NULL){
printk("tuntap_open_tramp : didn't receive a message\n");
- return(-EINVAL);
+ return -EINVAL;
}
if((cmsg->cmsg_level != SOL_SOCKET) ||
(cmsg->cmsg_type != SCM_RIGHTS)){
printk("tuntap_open_tramp : didn't receive a descriptor\n");
- return(-EINVAL);
+ return -EINVAL;
}
*fd_out = ((int *) CMSG_DATA(cmsg))[0];
os_set_exec_close(*fd_out, 1);
- return(0);
+ return 0;
}
static int tuntap_open(void *data)
@@ -135,7 +138,7 @@
err = tap_open_common(pri->dev, pri->gate_addr);
if(err < 0)
- return(err);
+ return err;
if(pri->fixed_config){
pri->fd = os_open_file("/dev/net/tun",
@@ -143,7 +146,7 @@
if(pri->fd < 0){
printk("Failed to open /dev/net/tun, err = %d\n",
-pri->fd);
- return(pri->fd);
+ return pri->fd;
}
memset(&ifr, 0, sizeof(ifr));
ifr.ifr_flags = IFF_TAP | IFF_NO_PI;
@@ -160,7 +163,7 @@
if(err < 0){
printk("tuntap_open : os_pipe failed - err = %d\n",
-err);
- return(err);
+ return err;
}
buffer = get_output_buffer(&len);
@@ -175,7 +178,7 @@
printk("%s", output);
free_output_buffer(buffer);
printk("tuntap_open_tramp failed - err = %d\n", -err);
- return(err);
+ return err;
}
pri->dev_name = uml_strdup(buffer);
@@ -187,7 +190,7 @@
iter_addresses(pri->dev, open_addr, pri->dev_name);
}
- return(pri->fd);
+ return pri->fd;
}
static void tuntap_close(int fd, void *data)
@@ -202,7 +205,7 @@
static int tuntap_set_mtu(int mtu, void *data)
{
- return(mtu);
+ return mtu;
}
const struct net_user_info tuntap_user_info = {
@@ -215,14 +218,3 @@
.delete_address = tuntap_del_addr,
.max_packet = MAX_PACKET
};
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
diff --git a/arch/um/os-Linux/file.c b/arch/um/os-Linux/file.c
index 371b433..6f92f73 100644
--- a/arch/um/os-Linux/file.c
+++ b/arch/um/os-Linux/file.c
@@ -18,7 +18,6 @@
#include "os.h"
#include "user.h"
#include "kern_util.h"
-#include "user_util.h"
static void copy_stat(struct uml_stat *dst, struct stat64 *src)
{
@@ -291,54 +290,22 @@
return 0;
}
-static int fault_buffer(void *start, int len,
- int (*copy_proc)(void *addr, void *buf, int len))
+int os_read_file(int fd, void *buf, int len)
{
- int page = getpagesize(), i;
- char c;
-
- for(i = 0; i < len; i += page){
- if((*copy_proc)(start + i, &c, sizeof(c)))
- return -EFAULT;
- }
- if((len % page) != 0){
- if((*copy_proc)(start + len - 1, &c, sizeof(c)))
- return -EFAULT;
- }
- return 0;
-}
-
-static int file_io(int fd, void *buf, int len,
- int (*io_proc)(int fd, void *buf, int len),
- int (*copy_user_proc)(void *addr, void *buf, int len))
-{
- int n, err;
-
- do {
- n = (*io_proc)(fd, buf, len);
- if((n < 0) && (errno == EFAULT)){
- err = fault_buffer(buf, len, copy_user_proc);
- if(err)
- return err;
- n = (*io_proc)(fd, buf, len);
- }
- } while((n < 0) && (errno == EINTR));
+ int n = read(fd, buf, len);
if(n < 0)
return -errno;
return n;
}
-int os_read_file(int fd, void *buf, int len)
-{
- return file_io(fd, buf, len, (int (*)(int, void *, int)) read,
- copy_from_user_proc);
-}
-
int os_write_file(int fd, const void *buf, int len)
{
- return file_io(fd, (void *) buf, len,
- (int (*)(int, void *, int)) write, copy_to_user_proc);
+ int n = write(fd, (void *) buf, len);
+
+ if(n < 0)
+ return -errno;
+ return n;
}
int os_file_size(char *file, unsigned long long *size_out)
diff --git a/arch/um/os-Linux/helper.c b/arch/um/os-Linux/helper.c
index c7ad630..97bed16 100644
--- a/arch/um/os-Linux/helper.c
+++ b/arch/um/os-Linux/helper.c
@@ -13,9 +13,9 @@
#include <sys/wait.h>
#include "user.h"
#include "kern_util.h"
-#include "user_util.h"
#include "os.h"
#include "um_malloc.h"
+#include "kern_constants.h"
struct helper_data {
void (*pre_exec)(void*);
@@ -25,28 +25,18 @@
char *buf;
};
-/* Debugging aid, changed only from gdb */
-int helper_pause = 0;
-
-static void helper_hup(int sig)
-{
-}
-
static int helper_child(void *arg)
{
struct helper_data *data = arg;
char **argv = data->argv;
int errval;
- if (helper_pause){
- signal(SIGHUP, helper_hup);
- pause();
- }
if (data->pre_exec != NULL)
(*data->pre_exec)(data->pre_data);
errval = execvp_noalloc(data->buf, argv[0], argv);
- printk("helper_child - execvp of '%s' failed - errno = %d\n", argv[0], -errval);
- os_write_file(data->fd, &errval, sizeof(errval));
+ printk("helper_child - execvp of '%s' failed - errno = %d\n", argv[0],
+ -errval);
+ write(data->fd, &errval, sizeof(errval));
kill(os_getpid(), SIGKILL);
return 0;
}
@@ -81,7 +71,7 @@
goto out_close;
}
- sp = stack + page_size() - sizeof(void *);
+ sp = stack + UM_KERN_PAGE_SIZE - sizeof(void *);
data.pre_exec = pre_exec;
data.pre_data = pre_data;
data.argv = argv;
@@ -98,13 +88,16 @@
close(fds[1]);
fds[1] = -1;
- /* Read the errno value from the child, if the exec failed, or get 0 if
- * the exec succeeded because the pipe fd was set as close-on-exec. */
- n = os_read_file(fds[0], &ret, sizeof(ret));
+ /*
+ * Read the errno value from the child, if the exec failed, or get 0 if
+ * the exec succeeded because the pipe fd was set as close-on-exec.
+ */
+ n = read(fds[0], &ret, sizeof(ret));
if (n == 0) {
ret = pid;
} else {
if (n < 0) {
+ n = -errno;
printk("run_helper : read on pipe failed, ret = %d\n",
-n);
ret = n;
@@ -135,7 +128,7 @@
if (stack == 0)
return -ENOMEM;
- sp = stack + (page_size() << stack_order) - sizeof(void *);
+ sp = stack + (UM_KERN_PAGE_SIZE << stack_order) - sizeof(void *);
pid = clone(proc, (void *) sp, flags | SIGCHLD, arg);
if (pid < 0) {
err = -errno;
diff --git a/arch/um/os-Linux/irq.c b/arch/um/os-Linux/irq.c
index d1b61d4..a633fa8 100644
--- a/arch/um/os-Linux/irq.c
+++ b/arch/um/os-Linux/irq.c
@@ -11,7 +11,6 @@
#include <sys/poll.h>
#include <sys/types.h>
#include <sys/time.h>
-#include "user_util.h"
#include "kern_util.h"
#include "user.h"
#include "process.h"
diff --git a/arch/um/os-Linux/main.c b/arch/um/os-Linux/main.c
index 685feaa..ea9a236 100644
--- a/arch/um/os-Linux/main.c
+++ b/arch/um/os-Linux/main.c
@@ -13,8 +13,8 @@
#include <sys/mman.h>
#include <sys/user.h>
#include <asm/page.h>
-#include "user_util.h"
#include "kern_util.h"
+#include "as-layout.h"
#include "mem_user.h"
#include "irq_user.h"
#include "user.h"
@@ -25,12 +25,7 @@
#include "os.h"
#include "um_malloc.h"
-/* Set in set_stklim, which is called from main and __wrap_malloc.
- * __wrap_malloc only calls it if main hasn't started.
- */
-unsigned long stacksizelim;
-
-/* Set in main */
+/* Set in main, unchanged thereafter */
char *linux_prog;
#define PGD_BOUND (4 * 1024 * 1024)
@@ -52,7 +47,6 @@
exit(1);
}
}
- stacksizelim = (lim.rlim_cur + PGD_BOUND - 1) & ~(PGD_BOUND - 1);
}
static __init void do_uml_initcalls(void)
@@ -126,7 +120,7 @@
extern void scan_elf_aux( char **envp);
-int main(int argc, char **argv, char **envp)
+int __init main(int argc, char **argv, char **envp)
{
char **new_argv;
int ret, i, err;
@@ -224,7 +218,7 @@
ret = 1;
}
printf("\n");
- return(uml_exitcode);
+ return uml_exitcode;
}
#define CAN_KMALLOC() \
@@ -237,7 +231,7 @@
void *ret;
if(!CAN_KMALLOC())
- return(__real_malloc(size));
+ return __real_malloc(size);
else if(size <= PAGE_SIZE) /* finding contiguos pages can be hard*/
ret = um_kmalloc(size);
else ret = um_vmalloc(size);
@@ -248,16 +242,17 @@
if(ret == NULL)
errno = ENOMEM;
- return(ret);
+ return ret;
}
void *__wrap_calloc(int n, int size)
{
void *ptr = __wrap_malloc(n * size);
- if(ptr == NULL) return(NULL);
+ if(ptr == NULL)
+ return NULL;
memset(ptr, 0, n * size);
- return(ptr);
+ return ptr;
}
extern void __real_free(void *);
diff --git a/arch/um/os-Linux/mem.c b/arch/um/os-Linux/mem.c
index f1ea169..c6378c6 100644
--- a/arch/um/os-Linux/mem.c
+++ b/arch/um/os-Linux/mem.c
@@ -11,7 +11,6 @@
#include <sys/statfs.h>
#include "kern_util.h"
#include "user.h"
-#include "user_util.h"
#include "mem_user.h"
#include "init.h"
#include "os.h"
@@ -165,7 +164,8 @@
* (file: kernel/tt/ptproxy/proxy.c, proc: start_debugger).
* So it isn't 'static' yet.
*/
-int make_tempfile(const char *template, char **out_tempname, int do_unlink)
+int __init make_tempfile(const char *template, char **out_tempname,
+ int do_unlink)
{
char *tempname;
int fd;
@@ -206,7 +206,7 @@
* This proc is used in start_up.c
* So it isn't 'static'.
*/
-int create_tmp_file(unsigned long long len)
+int __init create_tmp_file(unsigned long long len)
{
int fd, err;
char zero;
@@ -232,17 +232,16 @@
zero = 0;
- err = os_write_file(fd, &zero, 1);
+ err = write(fd, &zero, 1);
if(err != 1){
- errno = -err;
- perror("os_write_file");
+ perror("write");
exit(1);
}
return fd;
}
-int create_mem_file(unsigned long long len)
+int __init create_mem_file(unsigned long long len)
{
int err, fd;
@@ -257,7 +256,7 @@
}
-void check_tmpexec(void)
+void __init check_tmpexec(void)
{
void *addr;
int err, fd = create_tmp_file(UM_KERN_PAGE_SIZE);
diff --git a/arch/um/os-Linux/process.c b/arch/um/os-Linux/process.c
index 76bdd67..92a7b591 100644
--- a/arch/um/os-Linux/process.c
+++ b/arch/um/os-Linux/process.c
@@ -14,7 +14,6 @@
#include "ptrace_user.h"
#include "os.h"
#include "user.h"
-#include "user_util.h"
#include "process.h"
#include "irq_user.h"
#include "kern_util.h"
@@ -22,6 +21,7 @@
#include "skas_ptrace.h"
#include "kern_constants.h"
#include "uml-config.h"
+#include "init.h"
#define ARBITRARY_ADDR -1
#define FAILURE_PID -1
@@ -40,14 +40,14 @@
if(fd < 0){
printk("os_process_pc - couldn't open '%s', err = %d\n",
proc_stat, -fd);
- return(ARBITRARY_ADDR);
+ return ARBITRARY_ADDR;
}
- err = os_read_file(fd, buf, sizeof(buf));
+ CATCH_EINTR(err = read(fd, buf, sizeof(buf)));
if(err < 0){
printk("os_process_pc - couldn't read '%s', err = %d\n",
- proc_stat, -err);
+ proc_stat, errno);
os_close_file(fd);
- return(ARBITRARY_ADDR);
+ return ARBITRARY_ADDR;
}
os_close_file(fd);
pc = ARBITRARY_ADDR;
@@ -56,7 +56,7 @@
"%*d %*d %*d %*d %*d %lu", &pc) != 1){
printk("os_process_pc - couldn't find pc in '%s'\n", buf);
}
- return(pc);
+ return pc;
}
int os_process_parent(int pid)
@@ -65,21 +65,22 @@
char data[256];
int parent, n, fd;
- if(pid == -1) return(-1);
+ if(pid == -1)
+ return -1;
snprintf(stat, sizeof(stat), "/proc/%d/stat", pid);
fd = os_open_file(stat, of_read(OPENFLAGS()), 0);
if(fd < 0){
printk("Couldn't open '%s', err = %d\n", stat, -fd);
- return(FAILURE_PID);
+ return FAILURE_PID;
}
- n = os_read_file(fd, data, sizeof(data));
+ CATCH_EINTR(n = read(fd, data, sizeof(data)));
os_close_file(fd);
if(n < 0){
- printk("Couldn't read '%s', err = %d\n", stat, -n);
- return(FAILURE_PID);
+ printk("Couldn't read '%s', err = %d\n", stat, errno);
+ return FAILURE_PID;
}
parent = FAILURE_PID;
@@ -87,7 +88,7 @@
if(n != 1)
printk("Failed to scan '%s'\n", data);
- return(parent);
+ return parent;
}
void os_stop_process(int pid)
@@ -145,7 +146,7 @@
int os_getpid(void)
{
- return(syscall(__NR_getpid));
+ return syscall(__NR_getpid);
}
int os_getpgrp(void)
@@ -165,8 +166,8 @@
loc = mmap64((void *) virt, len, prot, MAP_SHARED | MAP_FIXED,
fd, off);
if(loc == MAP_FAILED)
- return(-errno);
- return(0);
+ return -errno;
+ return 0;
}
int os_protect_memory(void *addr, unsigned long len, int r, int w, int x)
@@ -175,8 +176,8 @@
(x ? PROT_EXEC : 0));
if(mprotect(addr, len, prot) < 0)
- return(-errno);
- return(0);
+ return -errno;
+ return 0;
}
int os_unmap_memory(void *addr, int len)
@@ -185,15 +186,15 @@
err = munmap(addr, len);
if(err < 0)
- return(-errno);
- return(0);
+ return -errno;
+ return 0;
}
#ifndef MADV_REMOVE
#define MADV_REMOVE KERNEL_MADV_REMOVE
#endif
-int os_drop_memory(void *addr, int length)
+int __init os_drop_memory(void *addr, int length)
{
int err;
@@ -203,7 +204,7 @@
return err;
}
-int can_drop_memory(void)
+int __init can_drop_memory(void)
{
void *addr;
int fd, ok = 0;
@@ -244,7 +245,7 @@
if(sig_stack != NULL){
pages = (1 << UML_CONFIG_KERNEL_STACK_ORDER);
- set_sigstack(sig_stack, pages * page_size());
+ set_sigstack(sig_stack, pages * UM_KERN_PAGE_SIZE);
flags = SA_ONSTACK;
}
if(usr1_handler){
diff --git a/arch/um/os-Linux/sigio.c b/arch/um/os-Linux/sigio.c
index 3fc43b3..8d4e0c6 100644
--- a/arch/um/os-Linux/sigio.c
+++ b/arch/um/os-Linux/sigio.c
@@ -8,6 +8,7 @@
#include <termios.h>
#include <pty.h>
#include <signal.h>
+#include <fcntl.h>
#include <errno.h>
#include <string.h>
#include <sched.h>
@@ -16,10 +17,10 @@
#include "init.h"
#include "user.h"
#include "kern_util.h"
-#include "user_util.h"
#include "sigio.h"
#include "os.h"
#include "um_malloc.h"
+#include "init.h"
/* Protected by sigio_lock(), also used by sigio_cleanup, which is an
* exitcall.
@@ -68,11 +69,12 @@
p = &fds->poll[i];
if(p->revents == 0) continue;
if(p->fd == sigio_private[1]){
- n = os_read_file(sigio_private[1], &c, sizeof(c));
+ CATCH_EINTR(n = read(sigio_private[1], &c,
+ sizeof(c)));
if(n != sizeof(c))
printk("write_sigio_thread : "
"read on socket failed, "
- "err = %d\n", -n);
+ "err = %d\n", errno);
tmp = current_poll;
current_poll = next_poll;
next_poll = tmp;
@@ -85,10 +87,10 @@
(fds->used - i) * sizeof(*fds->poll));
}
- n = os_write_file(respond_fd, &c, sizeof(c));
+ CATCH_EINTR(n = write(respond_fd, &c, sizeof(c)));
if(n != sizeof(c))
printk("write_sigio_thread : write on socket "
- "failed, err = %d\n", -n);
+ "failed, err = %d\n", errno);
}
}
@@ -126,15 +128,15 @@
char c;
flags = set_signals(0);
- n = os_write_file(sigio_private[0], &c, sizeof(c));
+ n = write(sigio_private[0], &c, sizeof(c));
if(n != sizeof(c)){
- printk("update_thread : write failed, err = %d\n", -n);
+ printk("update_thread : write failed, err = %d\n", errno);
goto fail;
}
- n = os_read_file(sigio_private[0], &c, sizeof(c));
+ CATCH_EINTR(n = read(sigio_private[0], &c, sizeof(c)));
if(n != sizeof(c)){
- printk("update_thread : read failed, err = %d\n", -n);
+ printk("update_thread : read failed, err = %d\n", errno);
goto fail;
}
@@ -320,6 +322,10 @@
close(l_write_sigio_fds[1]);
}
+/* Changed during early boot */
+static int pty_output_sigio = 0;
+static int pty_close_sigio = 0;
+
void maybe_sigio_broken(int fd, int read)
{
int err;
@@ -357,3 +363,143 @@
}
__uml_exitcall(sigio_cleanup);
+
+/* Used as a flag during SIGIO testing early in boot */
+static volatile int got_sigio = 0;
+
+static void __init handler(int sig)
+{
+ got_sigio = 1;
+}
+
+struct openpty_arg {
+ int master;
+ int slave;
+ int err;
+};
+
+static void openpty_cb(void *arg)
+{
+ struct openpty_arg *info = arg;
+
+ info->err = 0;
+ if(openpty(&info->master, &info->slave, NULL, NULL, NULL))
+ info->err = -errno;
+}
+
+static int async_pty(int master, int slave)
+{
+ int flags;
+
+ flags = fcntl(master, F_GETFL);
+ if(flags < 0)
+ return -errno;
+
+ if((fcntl(master, F_SETFL, flags | O_NONBLOCK | O_ASYNC) < 0) ||
+ (fcntl(master, F_SETOWN, os_getpid()) < 0))
+ return -errno;
+
+ if((fcntl(slave, F_SETFL, flags | O_NONBLOCK) < 0))
+ return -errno;
+
+ return(0);
+}
+
+static void __init check_one_sigio(void (*proc)(int, int))
+{
+ struct sigaction old, new;
+ struct openpty_arg pty = { .master = -1, .slave = -1 };
+ int master, slave, err;
+
+ initial_thread_cb(openpty_cb, &pty);
+ if(pty.err){
+ printk("openpty failed, errno = %d\n", -pty.err);
+ return;
+ }
+
+ master = pty.master;
+ slave = pty.slave;
+
+ if((master == -1) || (slave == -1)){
+ printk("openpty failed to allocate a pty\n");
+ return;
+ }
+
+ /* Not now, but complain so we now where we failed. */
+ err = raw(master);
+ if (err < 0)
+ panic("check_sigio : __raw failed, errno = %d\n", -err);
+
+ err = async_pty(master, slave);
+ if(err < 0)
+ panic("tty_fds : sigio_async failed, err = %d\n", -err);
+
+ if(sigaction(SIGIO, NULL, &old) < 0)
+ panic("check_sigio : sigaction 1 failed, errno = %d\n", errno);
+ new = old;
+ new.sa_handler = handler;
+ if(sigaction(SIGIO, &new, NULL) < 0)
+ panic("check_sigio : sigaction 2 failed, errno = %d\n", errno);
+
+ got_sigio = 0;
+ (*proc)(master, slave);
+
+ close(master);
+ close(slave);
+
+ if(sigaction(SIGIO, &old, NULL) < 0)
+ panic("check_sigio : sigaction 3 failed, errno = %d\n", errno);
+}
+
+static void tty_output(int master, int slave)
+{
+ int n;
+ char buf[512];
+
+ printk("Checking that host ptys support output SIGIO...");
+
+ memset(buf, 0, sizeof(buf));
+
+ while(write(master, buf, sizeof(buf)) > 0) ;
+ if(errno != EAGAIN)
+ panic("tty_output : write failed, errno = %d\n", errno);
+ while(((n = read(slave, buf, sizeof(buf))) > 0) && !got_sigio) ;
+
+ if(got_sigio){
+ printk("Yes\n");
+ pty_output_sigio = 1;
+ }
+ else if(n == -EAGAIN)
+ printk("No, enabling workaround\n");
+ else panic("tty_output : read failed, err = %d\n", n);
+}
+
+static void tty_close(int master, int slave)
+{
+ printk("Checking that host ptys support SIGIO on close...");
+
+ close(slave);
+ if(got_sigio){
+ printk("Yes\n");
+ pty_close_sigio = 1;
+ }
+ else printk("No, enabling workaround\n");
+}
+
+void __init check_sigio(void)
+{
+ if((os_access("/dev/ptmx", OS_ACC_R_OK) < 0) &&
+ (os_access("/dev/ptyp0", OS_ACC_R_OK) < 0)){
+ printk("No pseudo-terminals available - skipping pty SIGIO "
+ "check\n");
+ return;
+ }
+ check_one_sigio(tty_output);
+ check_one_sigio(tty_close);
+}
+
+/* Here because it only does the SIGIO testing for now */
+void __init os_check_bugs(void)
+{
+ check_sigio();
+}
diff --git a/arch/um/os-Linux/signal.c b/arch/um/os-Linux/signal.c
index 2667686..48d4934 100644
--- a/arch/um/os-Linux/signal.c
+++ b/arch/um/os-Linux/signal.c
@@ -11,7 +11,6 @@
#include <stdarg.h>
#include <string.h>
#include <sys/mman.h>
-#include "user_util.h"
#include "user.h"
#include "signal_kern.h"
#include "sysdep/sigcontext.h"
diff --git a/arch/um/os-Linux/skas/mem.c b/arch/um/os-Linux/skas/mem.c
index 9383e87..8e490ff 100644
--- a/arch/um/os-Linux/skas/mem.c
+++ b/arch/um/os-Linux/skas/mem.c
@@ -6,6 +6,7 @@
#include <signal.h>
#include <errno.h>
#include <string.h>
+#include <unistd.h>
#include <sys/mman.h>
#include <sys/wait.h>
#include <asm/page.h>
@@ -17,17 +18,17 @@
#include "os.h"
#include "proc_mm.h"
#include "ptrace_user.h"
-#include "user_util.h"
#include "kern_util.h"
#include "task.h"
#include "registers.h"
#include "uml-config.h"
#include "sysdep/ptrace.h"
#include "sysdep/stub.h"
+#include "init.h"
extern unsigned long batch_syscall_stub, __syscall_stub_start;
-extern void wait_stub_done(int pid, int sig, char * fname);
+extern void wait_stub_done(int pid);
static inline unsigned long *check_init_stack(struct mm_id * mm_idp,
unsigned long *stack)
@@ -39,6 +40,19 @@
return stack;
}
+static unsigned long syscall_regs[MAX_REG_NR];
+
+static int __init init_syscall_regs(void)
+{
+ get_safe_registers(syscall_regs, NULL);
+ syscall_regs[REGS_IP_INDEX] = UML_CONFIG_STUB_CODE +
+ ((unsigned long) &batch_syscall_stub -
+ (unsigned long) &__syscall_stub_start);
+ return 0;
+}
+
+__initcall(init_syscall_regs);
+
extern int proc_mm;
int single_count = 0;
@@ -47,12 +61,11 @@
static inline long do_syscall_stub(struct mm_id * mm_idp, void **addr)
{
- unsigned long regs[MAX_REG_NR];
int n, i;
long ret, offset;
unsigned long * data;
unsigned long * syscall;
- int pid = mm_idp->u.pid;
+ int err, pid = mm_idp->u.pid;
if(proc_mm)
#warning Need to look up userspace_pid by cpu
@@ -60,21 +73,21 @@
multi_count++;
- get_safe_registers(regs, NULL);
- regs[REGS_IP_INDEX] = UML_CONFIG_STUB_CODE +
- ((unsigned long) &batch_syscall_stub -
- (unsigned long) &__syscall_stub_start);
-
- n = ptrace_setregs(pid, regs);
+ n = ptrace_setregs(pid, syscall_regs);
if(n < 0){
printk("Registers - \n");
for(i = 0; i < MAX_REG_NR; i++)
- printk("\t%d\t0x%lx\n", i, regs[i]);
+ printk("\t%d\t0x%lx\n", i, syscall_regs[i]);
panic("do_syscall_stub : PTRACE_SETREGS failed, errno = %d\n",
-n);
}
- wait_stub_done(pid, 0, "do_syscall_stub");
+ err = ptrace(PTRACE_CONT, pid, 0, 0);
+ if(err)
+ panic("Failed to continue stub, pid = %d, errno = %d\n", pid,
+ errno);
+
+ wait_stub_done(pid);
/* When the stub stops, we find the following values on the
* beginning of the stack:
@@ -176,14 +189,10 @@
return 0;
}
-int map(struct mm_id * mm_idp, unsigned long virt, unsigned long len,
- int r, int w, int x, int phys_fd, unsigned long long offset,
- int done, void **data)
+int map(struct mm_id * mm_idp, unsigned long virt, unsigned long len, int prot,
+ int phys_fd, unsigned long long offset, int done, void **data)
{
- int prot, ret;
-
- prot = (r ? PROT_READ : 0) | (w ? PROT_WRITE : 0) |
- (x ? PROT_EXEC : 0);
+ int ret;
if(proc_mm){
struct proc_mm_op map;
@@ -200,9 +209,11 @@
.fd = phys_fd,
.offset= offset
} } } );
- ret = os_write_file(fd, &map, sizeof(map));
- if(ret != sizeof(map))
+ CATCH_EINTR(ret = write(fd, &map, sizeof(map)));
+ if(ret != sizeof(map)){
+ ret = -errno;
printk("map : /proc/mm map failed, err = %d\n", -ret);
+ }
else ret = 0;
}
else {
@@ -217,8 +228,8 @@
return ret;
}
-int unmap(struct mm_id * mm_idp, void *addr, unsigned long len, int done,
- void **data)
+int unmap(struct mm_id * mm_idp, unsigned long addr, unsigned long len,
+ int done, void **data)
{
int ret;
@@ -232,9 +243,11 @@
{ .addr =
(unsigned long) addr,
.len = len } } } );
- ret = os_write_file(fd, &unmap, sizeof(unmap));
- if(ret != sizeof(unmap))
+ CATCH_EINTR(ret = write(fd, &unmap, sizeof(unmap)));
+ if(ret != sizeof(unmap)){
+ ret = -errno;
printk("unmap - proc_mm write returned %d\n", ret);
+ }
else ret = 0;
}
else {
@@ -249,13 +262,11 @@
}
int protect(struct mm_id * mm_idp, unsigned long addr, unsigned long len,
- int r, int w, int x, int done, void **data)
+ unsigned int prot, int done, void **data)
{
struct proc_mm_op protect;
- int prot, ret;
+ int ret;
- prot = (r ? PROT_READ : 0) | (w ? PROT_WRITE : 0) |
- (x ? PROT_EXEC : 0);
if(proc_mm){
int fd = mm_idp->u.mm_fd;
@@ -267,9 +278,11 @@
.len = len,
.prot = prot } } } );
- ret = os_write_file(fd, &protect, sizeof(protect));
- if(ret != sizeof(protect))
+ CATCH_EINTR(ret = write(fd, &protect, sizeof(protect)));
+ if(ret != sizeof(protect)){
+ ret = -errno;
printk("protect failed, err = %d", -ret);
+ }
else ret = 0;
}
else {
diff --git a/arch/um/os-Linux/skas/process.c b/arch/um/os-Linux/skas/process.c
index 0564422..5c088a5 100644
--- a/arch/um/os-Linux/skas/process.c
+++ b/arch/um/os-Linux/skas/process.c
@@ -18,7 +18,6 @@
#include <asm/types.h>
#include "user.h"
#include "sysdep/ptrace.h"
-#include "user_util.h"
#include "kern_util.h"
#include "skas.h"
#include "stub-data.h"
@@ -34,6 +33,8 @@
#include "uml-config.h"
#include "process.h"
#include "longjmp.h"
+#include "kern_constants.h"
+#include "as-layout.h"
int is_skas_winch(int pid, int fd, void *data)
{
@@ -44,45 +45,58 @@
return(1);
}
-void wait_stub_done(int pid, int sig, char * fname)
+static int ptrace_dump_regs(int pid)
+{
+ unsigned long regs[MAX_REG_NR];
+ int i;
+
+ if(ptrace(PTRACE_GETREGS, pid, 0, regs) < 0)
+ return -errno;
+ else {
+ printk("Stub registers -\n");
+ for(i = 0; i < ARRAY_SIZE(regs); i++)
+ printk("\t%d - %lx\n", i, regs[i]);
+ }
+
+ return 0;
+}
+
+/*
+ * Signals that are OK to receive in the stub - we'll just continue it.
+ * SIGWINCH will happen when UML is inside a detached screen.
+ */
+#define STUB_SIG_MASK ((1 << SIGVTALRM) | (1 << SIGWINCH))
+
+/* Signals that the stub will finish with - anything else is an error */
+#define STUB_DONE_MASK ((1 << SIGUSR1) | (1 << SIGTRAP))
+
+void wait_stub_done(int pid)
{
int n, status, err;
- do {
- if ( sig != -1 ) {
- err = ptrace(PTRACE_CONT, pid, 0, sig);
- if(err)
- panic("%s : continue failed, errno = %d\n",
- fname, errno);
- }
- sig = 0;
-
+ while(1){
CATCH_EINTR(n = waitpid(pid, &status, WUNTRACED));
- } while((n >= 0) && WIFSTOPPED(status) &&
- ((WSTOPSIG(status) == SIGVTALRM) ||
- /* running UML inside a detached screen can cause
- * SIGWINCHes
- */
- (WSTOPSIG(status) == SIGWINCH)));
+ if((n < 0) || !WIFSTOPPED(status))
+ goto bad_wait;
- if((n < 0) || !WIFSTOPPED(status) ||
- (WSTOPSIG(status) != SIGUSR1 && WSTOPSIG(status) != SIGTRAP)){
- unsigned long regs[MAX_REG_NR];
+ if(((1 << WSTOPSIG(status)) & STUB_SIG_MASK) == 0)
+ break;
- if(ptrace(PTRACE_GETREGS, pid, 0, regs) < 0)
- printk("Failed to get registers from stub, "
- "errno = %d\n", errno);
- else {
- int i;
-
- printk("Stub registers -\n");
- for(i = 0; i < ARRAY_SIZE(regs); i++)
- printk("\t%d - %lx\n", i, regs[i]);
- }
- panic("%s : failed to wait for SIGUSR1/SIGTRAP, "
- "pid = %d, n = %d, errno = %d, status = 0x%x\n",
- fname, pid, n, errno, status);
+ err = ptrace(PTRACE_CONT, pid, 0, 0);
+ if(err)
+ panic("wait_stub_done : continue failed, errno = %d\n",
+ errno);
}
+
+ if(((1 << WSTOPSIG(status)) & STUB_DONE_MASK) != 0)
+ return;
+
+bad_wait:
+ err = ptrace_dump_regs(pid);
+ if(err)
+ printk("Failed to get registers from stub, errno = %d\n", -err);
+ panic("wait_stub_done : failed to wait for SIGUSR1/SIGTRAP, pid = %d, "
+ "n = %d, errno = %d, status = 0x%x\n", pid, n, errno, status);
}
extern unsigned long current_stub_stack(void);
@@ -104,7 +118,11 @@
sizeof(struct ptrace_faultinfo));
}
else {
- wait_stub_done(pid, SIGSEGV, "get_skas_faultinfo");
+ err = ptrace(PTRACE_CONT, pid, 0, SIGSEGV);
+ if(err)
+ panic("Failed to continue stub, pid = %d, errno = %d\n",
+ pid, errno);
+ wait_stub_done(pid);
/* faultinfo is prepared by the stub-segv-handler at start of
* the stub stack page. We just have to copy it.
@@ -142,9 +160,14 @@
CATCH_EINTR(err = waitpid(pid, &status, WUNTRACED));
if((err < 0) || !WIFSTOPPED(status) ||
- (WSTOPSIG(status) != SIGTRAP + 0x80))
+ (WSTOPSIG(status) != SIGTRAP + 0x80)){
+ err = ptrace_dump_regs(pid);
+ if(err)
+ printk("Failed to get registers from process, "
+ "errno = %d\n", -err);
panic("handle_trap - failed to wait at end of syscall, "
"errno = %d, status = %d\n", errno, status);
+ }
}
handle_syscall(regs);
@@ -172,7 +195,7 @@
int fd;
__u64 offset;
fd = phys_mapping(to_phys(&__syscall_stub_start), &offset);
- addr = mmap64((void *) UML_CONFIG_STUB_CODE, page_size(),
+ addr = mmap64((void *) UML_CONFIG_STUB_CODE, UM_KERN_PAGE_SIZE,
PROT_EXEC, MAP_FIXED | MAP_PRIVATE, fd, offset);
if(addr == MAP_FAILED){
printk("mapping mmap stub failed, errno = %d\n",
@@ -182,8 +205,8 @@
if(stack != NULL){
fd = phys_mapping(to_phys(stack), &offset);
- addr = mmap((void *) UML_CONFIG_STUB_DATA, page_size(),
- PROT_READ | PROT_WRITE,
+ addr = mmap((void *) UML_CONFIG_STUB_DATA,
+ UM_KERN_PAGE_SIZE, PROT_READ | PROT_WRITE,
MAP_FIXED | MAP_SHARED, fd, offset);
if(addr == MAP_FAILED){
printk("mapping segfault stack failed, "
@@ -199,7 +222,7 @@
(unsigned long) stub_segv_handler -
(unsigned long) &__syscall_stub_start;
- set_sigstack((void *) UML_CONFIG_STUB_DATA, page_size());
+ set_sigstack((void *) UML_CONFIG_STUB_DATA, UM_KERN_PAGE_SIZE);
sigemptyset(&sa.sa_mask);
sigaddset(&sa.sa_mask, SIGIO);
sigaddset(&sa.sa_mask, SIGWINCH);
@@ -291,10 +314,13 @@
UPT_SYSCALL_NR(regs) = -1; /* Assume: It's not a syscall */
if(WIFSTOPPED(status)){
- switch(WSTOPSIG(status)){
+ int sig = WSTOPSIG(status);
+ switch(sig){
case SIGSEGV:
- if(PTRACE_FULL_FAULTINFO || !ptrace_faultinfo)
- user_signal(SIGSEGV, regs, pid);
+ if(PTRACE_FULL_FAULTINFO || !ptrace_faultinfo){
+ get_skas_faultinfo(pid, ®s->skas.faultinfo);
+ (*sig_info[SIGSEGV])(SIGSEGV, regs);
+ }
else handle_segv(pid, regs);
break;
case SIGTRAP + 0x80:
@@ -309,11 +335,13 @@
case SIGBUS:
case SIGFPE:
case SIGWINCH:
- user_signal(WSTOPSIG(status), regs, pid);
+ block_signals();
+ (*sig_info[sig])(sig, regs);
+ unblock_signals();
break;
default:
printk("userspace - child stopped with signal "
- "%d\n", WSTOPSIG(status));
+ "%d\n", sig);
}
pid = userspace_pid[0];
interrupt_end();
@@ -325,11 +353,29 @@
}
}
+static unsigned long thread_regs[MAX_REG_NR];
+static unsigned long thread_fp_regs[HOST_FP_SIZE];
+
+static int __init init_thread_regs(void)
+{
+ get_safe_registers(thread_regs, thread_fp_regs);
+ /* Set parent's instruction pointer to start of clone-stub */
+ thread_regs[REGS_IP_INDEX] = UML_CONFIG_STUB_CODE +
+ (unsigned long) stub_clone_handler -
+ (unsigned long) &__syscall_stub_start;
+ thread_regs[REGS_SP_INDEX] = UML_CONFIG_STUB_DATA + PAGE_SIZE -
+ sizeof(void *);
+#ifdef __SIGNAL_FRAMESIZE
+ thread_regs[REGS_SP_INDEX] -= __SIGNAL_FRAMESIZE;
+#endif
+ return 0;
+}
+
+__initcall(init_thread_regs);
+
int copy_context_skas0(unsigned long new_stack, int pid)
{
int err;
- unsigned long regs[MAX_REG_NR];
- unsigned long fp_regs[HOST_FP_SIZE];
unsigned long current_stack = current_stub_stack();
struct stub_data *data = (struct stub_data *) current_stack;
struct stub_data *child_data = (struct stub_data *) new_stack;
@@ -344,23 +390,12 @@
.timer = ((struct itimerval)
{ { 0, 1000000 / hz() },
{ 0, 1000000 / hz() }})});
- get_safe_registers(regs, fp_regs);
-
- /* Set parent's instruction pointer to start of clone-stub */
- regs[REGS_IP_INDEX] = UML_CONFIG_STUB_CODE +
- (unsigned long) stub_clone_handler -
- (unsigned long) &__syscall_stub_start;
- regs[REGS_SP_INDEX] = UML_CONFIG_STUB_DATA + PAGE_SIZE -
- sizeof(void *);
-#ifdef __SIGNAL_FRAMESIZE
- regs[REGS_SP_INDEX] -= __SIGNAL_FRAMESIZE;
-#endif
- err = ptrace_setregs(pid, regs);
+ err = ptrace_setregs(pid, thread_regs);
if(err < 0)
panic("copy_context_skas0 : PTRACE_SETREGS failed, "
"pid = %d, errno = %d\n", pid, -err);
- err = ptrace_setfpregs(pid, fp_regs);
+ err = ptrace_setfpregs(pid, thread_fp_regs);
if(err < 0)
panic("copy_context_skas0 : PTRACE_SETFPREGS failed, "
"pid = %d, errno = %d\n", pid, -err);
@@ -371,7 +406,11 @@
/* Wait, until parent has finished its work: read child's pid from
* parent's stack, and check, if bad result.
*/
- wait_stub_done(pid, 0, "copy_context_skas0");
+ err = ptrace(PTRACE_CONT, pid, 0, 0);
+ if(err)
+ panic("Failed to continue new process, pid = %d, "
+ "errno = %d\n", pid, errno);
+ wait_stub_done(pid);
pid = data->err;
if(pid < 0)
@@ -381,7 +420,7 @@
/* Wait, until child has finished too: read child's result from
* child's stack and check it.
*/
- wait_stub_done(pid, -1, "copy_context_skas0");
+ wait_stub_done(pid);
if (child_data->err != UML_CONFIG_STUB_DATA)
panic("copy_context_skas0 - stub-child reports error %ld\n",
child_data->err);
@@ -396,7 +435,7 @@
/*
* This is used only, if stub pages are needed, while proc_mm is
- * availabl. Opening /proc/mm creates a new mm_context, which lacks
+ * available. Opening /proc/mm creates a new mm_context, which lacks
* the stub-pages. Thus, we map them using /proc/mm-fd
*/
void map_stub_pages(int fd, unsigned long code,
@@ -418,12 +457,13 @@
.fd = code_fd,
.offset = code_offset
} } });
- n = os_write_file(fd, &mmop, sizeof(mmop));
+ CATCH_EINTR(n = write(fd, &mmop, sizeof(mmop)));
if(n != sizeof(mmop)){
+ n = errno;
printk("mmap args - addr = 0x%lx, fd = %d, offset = %llx\n",
code, code_fd, (unsigned long long) code_offset);
panic("map_stub_pages : /proc/mm map for code failed, "
- "err = %d\n", -n);
+ "err = %d\n", n);
}
if ( stack ) {
@@ -440,10 +480,10 @@
.fd = map_fd,
.offset = map_offset
} } });
- n = os_write_file(fd, &mmop, sizeof(mmop));
+ CATCH_EINTR(n = write(fd, &mmop, sizeof(mmop)));
if(n != sizeof(mmop))
panic("map_stub_pages : /proc/mm map for data failed, "
- "err = %d\n", -n);
+ "err = %d\n", errno);
}
}
@@ -480,7 +520,15 @@
SA_ONSTACK | SA_RESTART, SIGUSR1, SIGIO, SIGALRM,
SIGVTALRM, -1);
- n = UML_SETJMP(&initial_jmpbuf);
+ /*
+ * Can't use UML_SETJMP or UML_LONGJMP here because they save
+ * and restore signals, with the possible side-effect of
+ * trying to handle any signals which came when they were
+ * blocked, which can't be done on this stack.
+ * Signals must be blocked when jumping back here and restored
+ * after returning to the jumper.
+ */
+ n = setjmp(initial_jmpbuf);
switch(n){
case INIT_JMP_NEW_THREAD:
(*switch_buf)[0].JB_IP = (unsigned long) new_thread_handler;
@@ -490,7 +538,7 @@
break;
case INIT_JMP_CALLBACK:
(*cb_proc)(cb_arg);
- UML_LONGJMP(cb_back, 1);
+ longjmp(*cb_back, 1);
break;
case INIT_JMP_HALT:
kmalloc_ok = 0;
@@ -501,7 +549,7 @@
default:
panic("Bad sigsetjmp return in start_idle_thread - %d\n", n);
}
- UML_LONGJMP(switch_buf, 1);
+ longjmp(*switch_buf, 1);
}
void initial_thread_cb_skas(void (*proc)(void *), void *arg)
diff --git a/arch/um/os-Linux/skas/trap.c b/arch/um/os-Linux/skas/trap.c
index 9ad5fbec..3b600c2 100644
--- a/arch/um/os-Linux/skas/trap.c
+++ b/arch/um/os-Linux/skas/trap.c
@@ -5,8 +5,8 @@
#include <signal.h>
#include <errno.h>
-#include "user_util.h"
#include "kern_util.h"
+#include "as-layout.h"
#include "task.h"
#include "sigcontext.h"
#include "skas.h"
@@ -15,29 +15,39 @@
#include "sysdep/ptrace_user.h"
#include "os.h"
+static union uml_pt_regs ksig_regs[UM_NR_CPUS];
+
void sig_handler_common_skas(int sig, void *sc_ptr)
{
struct sigcontext *sc = sc_ptr;
- struct skas_regs *r;
+ union uml_pt_regs *r;
void (*handler)(int, union uml_pt_regs *);
- int save_errno = errno;
- int save_user;
+ int save_user, save_errno = errno;
/* This is done because to allow SIGSEGV to be delivered inside a SEGV
* handler. This can happen in copy_user, and if SEGV is disabled,
* the process will die.
* XXX Figure out why this is better than SA_NODEFER
*/
- if(sig == SIGSEGV)
+ if(sig == SIGSEGV) {
change_sig(SIGSEGV, 1);
+ /* For segfaults, we want the data from the
+ * sigcontext. In this case, we don't want to mangle
+ * the process registers, so use a static set of
+ * registers. For other signals, the process
+ * registers are OK.
+ */
+ r = &ksig_regs[cpu()];
+ copy_sc(r, sc_ptr);
+ }
+ else r = TASK_REGS(get_current());
- r = &TASK_REGS(get_current())->skas;
- save_user = r->is_user;
- r->is_user = 0;
+ save_user = r->skas.is_user;
+ r->skas.is_user = 0;
if ( sig == SIGFPE || sig == SIGSEGV ||
sig == SIGBUS || sig == SIGILL ||
sig == SIGTRAP ) {
- GET_FAULTINFO_FROM_SC(r->faultinfo, sc);
+ GET_FAULTINFO_FROM_SC(r->skas.faultinfo, sc);
}
change_sig(SIGUSR1, 1);
@@ -49,25 +59,8 @@
sig != SIGVTALRM && sig != SIGALRM)
unblock_signals();
- handler(sig, (union uml_pt_regs *) r);
+ handler(sig, r);
errno = save_errno;
- r->is_user = save_user;
-}
-
-extern int ptrace_faultinfo;
-
-void user_signal(int sig, union uml_pt_regs *regs, int pid)
-{
- void (*handler)(int, union uml_pt_regs *);
- int segv = ((sig == SIGFPE) || (sig == SIGSEGV) || (sig == SIGBUS) ||
- (sig == SIGILL) || (sig == SIGTRAP));
-
- if (segv)
- get_skas_faultinfo(pid, ®s->skas.faultinfo);
-
- handler = sig_info[sig];
- handler(sig, (union uml_pt_regs *) regs);
-
- unblock_signals();
+ r->skas.is_user = save_user;
}
diff --git a/arch/um/os-Linux/start_up.c b/arch/um/os-Linux/start_up.c
index 5178eba..79471f8 100644
--- a/arch/um/os-Linux/start_up.c
+++ b/arch/um/os-Linux/start_up.c
@@ -17,10 +17,10 @@
#include <sys/time.h>
#include <sys/wait.h>
#include <sys/mman.h>
+#include <sys/resource.h>
#include <asm/unistd.h>
#include <asm/page.h>
#include <sys/types.h>
-#include "user_util.h"
#include "kern_util.h"
#include "user.h"
#include "signal_kern.h"
@@ -329,8 +329,32 @@
extern void check_tmpexec(void);
-void os_early_checks(void)
+static void __init check_coredump_limit(void)
{
+ struct rlimit lim;
+ int err = getrlimit(RLIMIT_CORE, &lim);
+
+ if(err){
+ perror("Getting core dump limit");
+ return;
+ }
+
+ printf("Core dump limits :\n\tsoft - ");
+ if(lim.rlim_cur == RLIM_INFINITY)
+ printf("NONE\n");
+ else printf("%lu\n", lim.rlim_cur);
+
+ printf("\thard - ");
+ if(lim.rlim_max == RLIM_INFINITY)
+ printf("NONE\n");
+ else printf("%lu\n", lim.rlim_max);
+}
+
+void __init os_early_checks(void)
+{
+ /* Print out the core dump limits early */
+ check_coredump_limit();
+
check_ptrace();
/* Need to check this early because mmapping happens before the
@@ -528,148 +552,3 @@
out:
return 1;
}
-
-
-/* Changed during early boot */
-int pty_output_sigio = 0;
-int pty_close_sigio = 0;
-
-/* Used as a flag during SIGIO testing early in boot */
-static volatile int got_sigio = 0;
-
-static void __init handler(int sig)
-{
- got_sigio = 1;
-}
-
-struct openpty_arg {
- int master;
- int slave;
- int err;
-};
-
-static void openpty_cb(void *arg)
-{
- struct openpty_arg *info = arg;
-
- info->err = 0;
- if(openpty(&info->master, &info->slave, NULL, NULL, NULL))
- info->err = -errno;
-}
-
-static int async_pty(int master, int slave)
-{
- int flags;
-
- flags = fcntl(master, F_GETFL);
- if(flags < 0)
- return -errno;
-
- if((fcntl(master, F_SETFL, flags | O_NONBLOCK | O_ASYNC) < 0) ||
- (fcntl(master, F_SETOWN, os_getpid()) < 0))
- return -errno;
-
- if((fcntl(slave, F_SETFL, flags | O_NONBLOCK) < 0))
- return -errno;
-
- return(0);
-}
-
-static void __init check_one_sigio(void (*proc)(int, int))
-{
- struct sigaction old, new;
- struct openpty_arg pty = { .master = -1, .slave = -1 };
- int master, slave, err;
-
- initial_thread_cb(openpty_cb, &pty);
- if(pty.err){
- printk("openpty failed, errno = %d\n", -pty.err);
- return;
- }
-
- master = pty.master;
- slave = pty.slave;
-
- if((master == -1) || (slave == -1)){
- printk("openpty failed to allocate a pty\n");
- return;
- }
-
- /* Not now, but complain so we now where we failed. */
- err = raw(master);
- if (err < 0)
- panic("check_sigio : __raw failed, errno = %d\n", -err);
-
- err = async_pty(master, slave);
- if(err < 0)
- panic("tty_fds : sigio_async failed, err = %d\n", -err);
-
- if(sigaction(SIGIO, NULL, &old) < 0)
- panic("check_sigio : sigaction 1 failed, errno = %d\n", errno);
- new = old;
- new.sa_handler = handler;
- if(sigaction(SIGIO, &new, NULL) < 0)
- panic("check_sigio : sigaction 2 failed, errno = %d\n", errno);
-
- got_sigio = 0;
- (*proc)(master, slave);
-
- close(master);
- close(slave);
-
- if(sigaction(SIGIO, &old, NULL) < 0)
- panic("check_sigio : sigaction 3 failed, errno = %d\n", errno);
-}
-
-static void tty_output(int master, int slave)
-{
- int n;
- char buf[512];
-
- printk("Checking that host ptys support output SIGIO...");
-
- memset(buf, 0, sizeof(buf));
-
- while(os_write_file(master, buf, sizeof(buf)) > 0) ;
- if(errno != EAGAIN)
- panic("check_sigio : write failed, errno = %d\n", errno);
- while(((n = os_read_file(slave, buf, sizeof(buf))) > 0) && !got_sigio) ;
-
- if(got_sigio){
- printk("Yes\n");
- pty_output_sigio = 1;
- }
- else if(n == -EAGAIN) printk("No, enabling workaround\n");
- else panic("check_sigio : read failed, err = %d\n", n);
-}
-
-static void tty_close(int master, int slave)
-{
- printk("Checking that host ptys support SIGIO on close...");
-
- close(slave);
- if(got_sigio){
- printk("Yes\n");
- pty_close_sigio = 1;
- }
- else printk("No, enabling workaround\n");
-}
-
-void __init check_sigio(void)
-{
- if((os_access("/dev/ptmx", OS_ACC_R_OK) < 0) &&
- (os_access("/dev/ptyp0", OS_ACC_R_OK) < 0)){
- printk("No pseudo-terminals available - skipping pty SIGIO "
- "check\n");
- return;
- }
- check_one_sigio(tty_output);
- check_one_sigio(tty_close);
-}
-
-void os_check_bugs(void)
-{
- check_ptrace();
- check_sigio();
-}
-
diff --git a/arch/um/os-Linux/sys-i386/tls.c b/arch/um/os-Linux/sys-i386/tls.c
index 2565320..32ed41e 100644
--- a/arch/um/os-Linux/sys-i386/tls.c
+++ b/arch/um/os-Linux/sys-i386/tls.c
@@ -5,7 +5,7 @@
#include <unistd.h>
#include "sysdep/tls.h"
-#include "user_util.h"
+#include "user.h"
/* Checks whether host supports TLS, and sets *tls_min according to the value
* valid on the host.
diff --git a/arch/um/os-Linux/time.c b/arch/um/os-Linux/time.c
index 2115b8b..5de169b 100644
--- a/arch/um/os-Linux/time.c
+++ b/arch/um/os-Linux/time.c
@@ -10,7 +10,6 @@
#include <sys/time.h>
#include <signal.h>
#include <errno.h>
-#include "user_util.h"
#include "kern_util.h"
#include "user.h"
#include "process.h"
diff --git a/arch/um/os-Linux/trap.c b/arch/um/os-Linux/trap.c
index d221214..295da65 100644
--- a/arch/um/os-Linux/trap.c
+++ b/arch/um/os-Linux/trap.c
@@ -6,7 +6,6 @@
#include <stdlib.h>
#include <signal.h>
#include "kern_util.h"
-#include "user_util.h"
#include "os.h"
#include "mode.h"
#include "longjmp.h"
diff --git a/arch/um/os-Linux/tt.c b/arch/um/os-Linux/tt.c
index 3dc3a02..bcf9359 100644
--- a/arch/um/os-Linux/tt.c
+++ b/arch/um/os-Linux/tt.c
@@ -18,7 +18,6 @@
#include <asm/ptrace.h>
#include <asm/unistd.h>
#include <asm/page.h>
-#include "user_util.h"
#include "kern_util.h"
#include "user.h"
#include "signal_kern.h"
@@ -32,6 +31,7 @@
#include "choose-mode.h"
#include "mode.h"
#include "tempfile.h"
+#include "kern_constants.h"
int protect_memory(unsigned long addr, unsigned long len, int r, int w, int x,
int must_succeed)
@@ -143,7 +143,7 @@
int sig = sigkill;
t = arg;
- t->pid = clone(t->tramp, (void *) t->temp_stack + page_size()/2,
+ t->pid = clone(t->tramp, (void *) t->temp_stack + UM_KERN_PAGE_SIZE/2,
t->flags, t->tramp_data);
if(t->pid > 0) wait_for_stop(t->pid, SIGSTOP, PTRACE_CONT, NULL);
kill(os_getpid(), sig);
diff --git a/arch/um/os-Linux/tty_log.c b/arch/um/os-Linux/tty_log.c
index c6ba56c..d11a55b 100644
--- a/arch/um/os-Linux/tty_log.c
+++ b/arch/um/os-Linux/tty_log.c
@@ -53,9 +53,9 @@
.direction = 0,
.sec = tv.tv_sec,
.usec = tv.tv_usec } );
- os_write_file(tty_log_fd, &data, sizeof(data));
- os_write_file(tty_log_fd, ¤t_tty, data.len);
- return(tty_log_fd);
+ write(tty_log_fd, &data, sizeof(data));
+ write(tty_log_fd, ¤t_tty, data.len);
+ return tty_log_fd;
}
sprintf(buf, "%s/%0u-%0u", tty_log_dir, (unsigned int) tv.tv_sec,
@@ -67,7 +67,7 @@
printk("open_tty_log : couldn't open '%s', errno = %d\n",
buf, -fd);
}
- return(fd);
+ return fd;
}
void close_tty_log(int fd, void *tty)
@@ -83,7 +83,7 @@
.direction = 0,
.sec = tv.tv_sec,
.usec = tv.tv_usec } );
- os_write_file(tty_log_fd, &data, sizeof(data));
+ write(tty_log_fd, &data, sizeof(data));
return;
}
os_close_file(fd);
@@ -98,21 +98,21 @@
try = (len > sizeof(chunk)) ? sizeof(chunk) : len;
missed = copy_from_user_proc(chunk, (char *) buf, try);
try -= missed;
- n = os_write_file(fd, chunk, try);
+ n = write(fd, chunk, try);
if(n != try) {
if(n < 0)
- return(n);
- return(-EIO);
+ return -errno;
+ return -EIO;
}
if(missed != 0)
- return(-EFAULT);
+ return -EFAULT;
len -= try;
total += try;
buf += try;
}
- return(total);
+ return total;
}
int write_tty_log(int fd, const char *buf, int len, void *tty, int is_read)
@@ -130,10 +130,10 @@
.direction = direction,
.sec = tv.tv_sec,
.usec = tv.tv_usec } );
- os_write_file(tty_log_fd, &data, sizeof(data));
+ write(tty_log_fd, &data, sizeof(data));
}
- return(log_chunk(fd, buf, len));
+ return log_chunk(fd, buf, len);
}
void log_exec(char **argv, void *tty)
@@ -161,7 +161,7 @@
.direction = 0,
.sec = tv.tv_sec,
.usec = tv.tv_usec } );
- os_write_file(tty_log_fd, &data, sizeof(data));
+ write(tty_log_fd, &data, sizeof(data));
for(ptr = argv; ; ptr++){
if(copy_from_user_proc(&arg, ptr, sizeof(arg)))
@@ -179,7 +179,7 @@
static int register_logger(void)
{
register_tty_logger(open_tty_log, write_tty_log, close_tty_log);
- return(0);
+ return 0;
}
__uml_initcall(register_logger);
diff --git a/arch/um/os-Linux/util.c b/arch/um/os-Linux/util.c
index 56b8a50..c307a89 100644
--- a/arch/um/os-Linux/util.c
+++ b/arch/um/os-Linux/util.c
@@ -21,7 +21,6 @@
#include <sched.h>
#include <termios.h>
#include <string.h>
-#include "user_util.h"
#include "kern_util.h"
#include "user.h"
#include "mem_user.h"
@@ -30,28 +29,29 @@
#include "uml-config.h"
#include "os.h"
#include "longjmp.h"
+#include "kern_constants.h"
void stack_protections(unsigned long address)
{
int prot = PROT_READ | PROT_WRITE | PROT_EXEC;
- if(mprotect((void *) address, page_size(), prot) < 0)
+ if(mprotect((void *) address, UM_KERN_PAGE_SIZE, prot) < 0)
panic("protecting stack failed, errno = %d", errno);
}
void task_protections(unsigned long address)
{
- unsigned long guard = address + page_size();
- unsigned long stack = guard + page_size();
+ unsigned long guard = address + UM_KERN_PAGE_SIZE;
+ unsigned long stack = guard + UM_KERN_PAGE_SIZE;
int prot = 0, pages;
#ifdef notdef
- if(mprotect((void *) stack, page_size(), prot) < 0)
+ if(mprotect((void *) stack, UM_KERN_PAGE_SIZE, prot) < 0)
panic("protecting guard page failed, errno = %d", errno);
#endif
pages = (1 << UML_CONFIG_KERNEL_STACK_ORDER) - 2;
prot = PROT_READ | PROT_WRITE | PROT_EXEC;
- if(mprotect((void *) stack, pages * page_size(), prot) < 0)
+ if(mprotect((void *) stack, pages * UM_KERN_PAGE_SIZE, prot) < 0)
panic("protecting stack failed, errno = %d", errno);
}
@@ -96,15 +96,13 @@
strcpy(machine_out, host.machine);
}
-char host_info[(_UTSNAME_LENGTH + 1) * 4 + _UTSNAME_NODENAME_LENGTH + 1];
-
-void setup_hostinfo(void)
+void setup_hostinfo(char *buf, int len)
{
struct utsname host;
uname(&host);
- sprintf(host_info, "%s %s %s %s %s", host.sysname, host.nodename,
- host.release, host.version, host.machine);
+ snprintf(buf, len, "%s %s %s %s %s", host.sysname, host.nodename,
+ host.release, host.version, host.machine);
}
int setjmp_wrapper(void (*proc)(void *, void *), ...)
@@ -121,3 +119,9 @@
va_end(args);
return n;
}
+
+void os_dump_core(void)
+{
+ signal(SIGSEGV, SIG_DFL);
+ abort();
+}
diff --git a/arch/um/sys-i386/bugs.c b/arch/um/sys-i386/bugs.c
index f1bcd39..0393e44 100644
--- a/arch/um/sys-i386/bugs.c
+++ b/arch/um/sys-i386/bugs.c
@@ -1,4 +1,4 @@
-/*
+/*
* Copyright (C) 2002 Jeff Dike (jdike@karaya.com)
* Licensed under the GPL
*/
@@ -13,7 +13,6 @@
#include "sysdep/ptrace.h"
#include "task.h"
#include "os.h"
-#include "user_util.h"
#define MAXTOKEN 64
@@ -32,21 +31,21 @@
n = os_read_file(fd, ptr, sizeof(*ptr));
c = *ptr++;
if(n != sizeof(*ptr)){
- if(n == 0) return(0);
+ if(n == 0)
+ return 0;
printk("Reading /proc/cpuinfo failed, err = %d\n", -n);
if(n < 0)
- return(n);
- else
- return(-EIO);
+ return n;
+ else return -EIO;
}
} while((c != '\n') && (c != stop) && (ptr < end));
if(ptr == end){
printk("Failed to find '%c' in /proc/cpuinfo\n", stop);
- return(-1);
+ return -1;
}
*(ptr - 1) = '\0';
- return(c);
+ return c;
}
static int find_cpuinfo_line(int fd, char *key, char *scratch, int len)
@@ -58,48 +57,25 @@
while(1){
c = token(fd, scratch, len - 1, ':');
if(c <= 0)
- return(0);
+ return 0;
else if(c != ':'){
printk("Failed to find ':' in /proc/cpuinfo\n");
- return(0);
+ return 0;
}
if(!strncmp(scratch, key, strlen(key)))
- return(1);
+ return 1;
do {
n = os_read_file(fd, &c, sizeof(c));
if(n != sizeof(c)){
printk("Failed to find newline in "
"/proc/cpuinfo, err = %d\n", -n);
- return(0);
+ return 0;
}
} while(c != '\n');
}
- return(0);
-}
-
-int cpu_feature(char *what, char *buf, int len)
-{
- int fd, ret = 0;
-
- fd = os_open_file("/proc/cpuinfo", of_read(OPENFLAGS()), 0);
- if(fd < 0){
- printk("Couldn't open /proc/cpuinfo, err = %d\n", -fd);
- return(0);
- }
-
- if(!find_cpuinfo_line(fd, what, buf, len)){
- printk("Couldn't find '%s' line in /proc/cpuinfo\n", what);
- goto out_close;
- }
-
- token(fd, buf, len, '\n');
- ret = 1;
-
- out_close:
- os_close_file(fd);
- return(ret);
+ return 0;
}
static int check_cpu_flag(char *feature, int *have_it)
@@ -119,7 +95,8 @@
goto out;
c = token(fd, buf, len - 1, ' ');
- if(c < 0) goto out;
+ if(c < 0)
+ goto out;
else if(c != ' '){
printk("Failed to find ' ' in /proc/cpuinfo\n");
goto out;
@@ -127,7 +104,8 @@
while(1){
c = token(fd, buf, len - 1, ' ');
- if(c < 0) goto out;
+ if(c < 0)
+ goto out;
else if(c == '\n') break;
if(!strcmp(buf, feature)){
@@ -136,8 +114,10 @@
}
}
out:
- if(*have_it == 0) printk("No\n");
- else if(*have_it == 1) printk("Yes\n");
+ if(*have_it == 0)
+ printk("No\n");
+ else if(*have_it == 1)
+ printk("Yes\n");
os_close_file(fd);
return 1;
}
@@ -189,12 +169,13 @@
/* This is testing for a cmov (0x0f 0x4x) instruction causing a
* SIGILL in init.
*/
- if((sig != SIGILL) || (TASK_PID(get_current()) != 1)) return(0);
+ if((sig != SIGILL) || (TASK_PID(get_current()) != 1))
+ return 0;
if (copy_from_user_proc(tmp, (void *) UPT_IP(regs), 2))
panic("SIGILL in init, could not read instructions!\n");
if((tmp[0] != 0x0f) || ((tmp[1] & 0xf0) != 0x40))
- return(0);
+ return 0;
if(host_has_cmov == 0)
panic("SIGILL caused by cmov, which this processor doesn't "
@@ -208,16 +189,5 @@
"implements it, boot a filesystem compiled for older "
"processors");
else panic("Bad value for host_has_cmov (%d)", host_has_cmov);
- return(0);
+ return 0;
}
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
diff --git a/arch/um/sys-i386/fault.c b/arch/um/sys-i386/fault.c
index d0bbcdf..745b4fd 100644
--- a/arch/um/sys-i386/fault.c
+++ b/arch/um/sys-i386/fault.c
@@ -3,9 +3,7 @@
* Licensed under the GPL
*/
-#include <signal.h>
#include "sysdep/ptrace.h"
-#include "sysdep/sigcontext.h"
/* These two are from asm-um/uaccess.h and linux/module.h, check them. */
struct exception_table_entry
@@ -17,26 +15,14 @@
const struct exception_table_entry *search_exception_tables(unsigned long add);
/* Compare this to arch/i386/mm/extable.c:fixup_exception() */
-int arch_fixup(unsigned long address, void *sc_ptr)
+int arch_fixup(unsigned long address, union uml_pt_regs *regs)
{
- struct sigcontext *sc = sc_ptr;
const struct exception_table_entry *fixup;
fixup = search_exception_tables(address);
if(fixup != 0){
- sc->eip = fixup->fixup;
+ UPT_IP(regs) = fixup->fixup;
return(1);
}
return(0);
}
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
diff --git a/arch/um/sys-i386/ptrace_user.c b/arch/um/sys-i386/ptrace_user.c
index 01212c8..40ff0c8 100644
--- a/arch/um/sys-i386/ptrace_user.c
+++ b/arch/um/sys-i386/ptrace_user.c
@@ -1,4 +1,4 @@
-/*
+/*
* Copyright (C) 2002 Jeff Dike (jdike@karaya.com)
* Licensed under the GPL
*/
@@ -15,7 +15,6 @@
#include "user.h"
#include "os.h"
#include "uml-config.h"
-#include "user_util.h"
int ptrace_getregs(long pid, unsigned long *regs_out)
{
@@ -45,7 +44,8 @@
return 0;
}
-/* All the below stuff is of interest for TT mode only */
+#ifdef UML_CONFIG_MODE_TT
+
static void write_debugregs(int pid, unsigned long *regs)
{
struct user *dummy;
@@ -128,13 +128,4 @@
}
#endif
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
+#endif
diff --git a/arch/um/sys-i386/signal.c b/arch/um/sys-i386/signal.c
index 3f6acd6..1cbf95f 100644
--- a/arch/um/sys-i386/signal.c
+++ b/arch/um/sys-i386/signal.c
@@ -18,6 +18,28 @@
#include "skas.h"
+void copy_sc(union uml_pt_regs *regs, void *from)
+{
+ struct sigcontext *sc = from;
+
+ REGS_GS(regs->skas.regs) = sc->gs;
+ REGS_FS(regs->skas.regs) = sc->fs;
+ REGS_ES(regs->skas.regs) = sc->es;
+ REGS_DS(regs->skas.regs) = sc->ds;
+ REGS_EDI(regs->skas.regs) = sc->edi;
+ REGS_ESI(regs->skas.regs) = sc->esi;
+ REGS_EBP(regs->skas.regs) = sc->ebp;
+ REGS_SP(regs->skas.regs) = sc->esp;
+ REGS_EBX(regs->skas.regs) = sc->ebx;
+ REGS_EDX(regs->skas.regs) = sc->edx;
+ REGS_ECX(regs->skas.regs) = sc->ecx;
+ REGS_EAX(regs->skas.regs) = sc->eax;
+ REGS_IP(regs->skas.regs) = sc->eip;
+ REGS_CS(regs->skas.regs) = sc->cs;
+ REGS_EFLAGS(regs->skas.regs) = sc->eflags;
+ REGS_SS(regs->skas.regs) = sc->ss;
+}
+
static int copy_sc_from_user_skas(struct pt_regs *regs,
struct sigcontext __user *from)
{
@@ -28,33 +50,18 @@
err = copy_from_user(&sc, from, sizeof(sc));
err |= copy_from_user(fpregs, sc.fpstate, sizeof(fpregs));
if(err)
- return(err);
+ return err;
- REGS_GS(regs->regs.skas.regs) = sc.gs;
- REGS_FS(regs->regs.skas.regs) = sc.fs;
- REGS_ES(regs->regs.skas.regs) = sc.es;
- REGS_DS(regs->regs.skas.regs) = sc.ds;
- REGS_EDI(regs->regs.skas.regs) = sc.edi;
- REGS_ESI(regs->regs.skas.regs) = sc.esi;
- REGS_EBP(regs->regs.skas.regs) = sc.ebp;
- REGS_SP(regs->regs.skas.regs) = sc.esp;
- REGS_EBX(regs->regs.skas.regs) = sc.ebx;
- REGS_EDX(regs->regs.skas.regs) = sc.edx;
- REGS_ECX(regs->regs.skas.regs) = sc.ecx;
- REGS_EAX(regs->regs.skas.regs) = sc.eax;
- REGS_IP(regs->regs.skas.regs) = sc.eip;
- REGS_CS(regs->regs.skas.regs) = sc.cs;
- REGS_EFLAGS(regs->regs.skas.regs) = sc.eflags;
- REGS_SS(regs->regs.skas.regs) = sc.ss;
+ copy_sc(®s->regs, &sc);
err = restore_fp_registers(userspace_pid[0], fpregs);
- if(err < 0){
+ if(err < 0) {
printk("copy_sc_from_user_skas - PTRACE_SETFPREGS failed, "
- "errno = %d\n", err);
- return(1);
+ "errno = %d\n", -err);
+ return err;
}
- return(0);
+ return 0;
}
int copy_sc_to_user_skas(struct sigcontext __user *to, struct _fpstate __user *to_fp,
@@ -90,16 +97,16 @@
if(err < 0){
printk("copy_sc_to_user_skas - PTRACE_GETFPREGS failed, "
"errno = %d\n", err);
- return(1);
+ return 1;
}
to_fp = (to_fp ? to_fp : (struct _fpstate __user *) (to + 1));
sc.fpstate = to_fp;
if(err)
- return(err);
+ return err;
- return(copy_to_user(to, &sc, sizeof(sc)) ||
- copy_to_user(to_fp, fpregs, sizeof(fpregs)));
+ return copy_to_user(to, &sc, sizeof(sc)) ||
+ copy_to_user(to_fp, fpregs, sizeof(fpregs));
}
#endif
@@ -129,7 +136,7 @@
to->fpstate = to_fp;
if(to_fp != NULL)
err |= copy_from_user(to_fp, from_fp, fpsize);
- return(err);
+ return err;
}
int copy_sc_to_user_tt(struct sigcontext __user *to, struct _fpstate __user *fp,
@@ -164,15 +171,15 @@
ret = CHOOSE_MODE(copy_sc_from_user_tt(UPT_SC(&to->regs), from,
sizeof(struct _fpstate)),
copy_sc_from_user_skas(to, from));
- return(ret);
+ return ret;
}
static int copy_sc_to_user(struct sigcontext __user *to, struct _fpstate __user *fp,
struct pt_regs *from, unsigned long sp)
{
- return(CHOOSE_MODE(copy_sc_to_user_tt(to, fp, UPT_SC(&from->regs),
+ return CHOOSE_MODE(copy_sc_to_user_tt(to, fp, UPT_SC(&from->regs),
sizeof(*fp), sp),
- copy_sc_to_user_skas(to, fp, from, sp)));
+ copy_sc_to_user_skas(to, fp, from, sp));
}
static int copy_ucontext_to_user(struct ucontext __user *uc, struct _fpstate __user *fp,
@@ -185,7 +192,7 @@
err |= put_user(current->sas_ss_size, &uc->uc_stack.ss_size);
err |= copy_sc_to_user(&uc->uc_mcontext, fp, ¤t->thread.regs, sp);
err |= copy_to_user(&uc->uc_sigmask, set, sizeof(*set));
- return(err);
+ return err;
}
struct sigframe
@@ -359,7 +366,7 @@
/* Avoid ERESTART handling */
PT_REGS_SYSCALL_NR(¤t->thread.regs) = -1;
- return(PT_REGS_SYSCALL_RET(¤t->thread.regs));
+ return PT_REGS_SYSCALL_RET(¤t->thread.regs);
segfault:
force_sig(SIGSEGV, current);
@@ -389,20 +396,9 @@
/* Avoid ERESTART handling */
PT_REGS_SYSCALL_NR(¤t->thread.regs) = -1;
- return(PT_REGS_SYSCALL_RET(¤t->thread.regs));
+ return PT_REGS_SYSCALL_RET(¤t->thread.regs);
segfault:
force_sig(SIGSEGV, current);
return 0;
}
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
diff --git a/arch/um/sys-i386/tls.c b/arch/um/sys-i386/tls.c
index 643dab5..fea8e5e 100644
--- a/arch/um/sys-i386/tls.c
+++ b/arch/um/sys-i386/tls.c
@@ -23,9 +23,13 @@
#include "skas.h"
#endif
-/* If needed we can detect when it's uninitialized. */
+/*
+ * If needed we can detect when it's uninitialized.
+ *
+ * These are initialized in an initcall and unchanged thereafter.
+ */
static int host_supports_tls = -1;
-int host_gdt_entry_tls_min = -1;
+int host_gdt_entry_tls_min;
#ifdef CONFIG_MODE_SKAS
int do_set_thread_area_skas(struct user_desc *info)
@@ -361,7 +365,8 @@
/* XXX: This part is probably common to i386 and x86-64. Don't create a common
* file for now, do that when implementing x86-64 support.*/
-static int __init __setup_host_supports_tls(void) {
+static int __init __setup_host_supports_tls(void)
+{
check_host_supports_tls(&host_supports_tls, &host_gdt_entry_tls_min);
if (host_supports_tls) {
printk(KERN_INFO "Host TLS support detected\n");
diff --git a/arch/um/sys-i386/user-offsets.c b/arch/um/sys-i386/user-offsets.c
index 447306b..29118cf 100644
--- a/arch/um/sys-i386/user-offsets.c
+++ b/arch/um/sys-i386/user-offsets.c
@@ -1,9 +1,10 @@
#include <stdio.h>
+#include <stddef.h>
#include <signal.h>
+#include <sys/poll.h>
+#include <sys/mman.h>
#include <asm/ptrace.h>
#include <asm/user.h>
-#include <stddef.h>
-#include <sys/poll.h>
#define DEFINE(sym, val) \
asm volatile("\n->" #sym " %0 " #val : : "i" (val))
@@ -47,7 +48,6 @@
OFFSET(HOST_SC_FP_ST, _fpstate, _st);
OFFSET(HOST_SC_FXSR_ENV, _fpstate, _fxsr_env);
- DEFINE(HOST_FRAME_SIZE, FRAME_SIZE);
DEFINE_LONGS(HOST_FP_SIZE, sizeof(struct user_i387_struct));
DEFINE_LONGS(HOST_XFP_SIZE, sizeof(struct user_fxsr_struct));
@@ -73,4 +73,8 @@
DEFINE(UM_POLLIN, POLLIN);
DEFINE(UM_POLLPRI, POLLPRI);
DEFINE(UM_POLLOUT, POLLOUT);
+
+ DEFINE(UM_PROT_READ, PROT_READ);
+ DEFINE(UM_PROT_WRITE, PROT_WRITE);
+ DEFINE(UM_PROT_EXEC, PROT_EXEC);
}
diff --git a/arch/um/sys-ppc/sigcontext.c b/arch/um/sys-ppc/sigcontext.c
index 5d430fc..4bdc15c 100644
--- a/arch/um/sys-ppc/sigcontext.c
+++ b/arch/um/sys-ppc/sigcontext.c
@@ -1,7 +1,6 @@
#include "asm/ptrace.h"
#include "asm/sigcontext.h"
#include "sysdep/ptrace.h"
-#include "user_util.h"
/*
* Overrides for Emacs so that we follow Linus's tabbing style.
diff --git a/arch/um/sys-x86_64/bugs.c b/arch/um/sys-x86_64/bugs.c
index fdce7ea..0954788 100644
--- a/arch/um/sys-x86_64/bugs.c
+++ b/arch/um/sys-x86_64/bugs.c
@@ -4,12 +4,7 @@
* Licensed under the GPL
*/
-#include "linux/sched.h"
-#include "linux/errno.h"
-#include "asm/system.h"
-#include "asm/pda.h"
#include "sysdep/ptrace.h"
-#include "os.h"
void arch_init_thread(void)
{
@@ -21,102 +16,5 @@
int arch_handle_signal(int sig, union uml_pt_regs *regs)
{
- return(0);
+ return 0;
}
-
-#define MAXTOKEN 64
-
-/* Set during early boot */
-int host_has_cmov = 1;
-int host_has_xmm = 0;
-
-static char token(int fd, char *buf, int len, char stop)
-{
- int n;
- char *ptr, *end, c;
-
- ptr = buf;
- end = &buf[len];
- do {
- n = os_read_file(fd, ptr, sizeof(*ptr));
- c = *ptr++;
- if(n != sizeof(*ptr)){
- if(n == 0) return(0);
- printk("Reading /proc/cpuinfo failed, err = %d\n", -n);
- if(n < 0)
- return(n);
- else
- return(-EIO);
- }
- } while((c != '\n') && (c != stop) && (ptr < end));
-
- if(ptr == end){
- printk("Failed to find '%c' in /proc/cpuinfo\n", stop);
- return(-1);
- }
- *(ptr - 1) = '\0';
- return(c);
-}
-
-static int find_cpuinfo_line(int fd, char *key, char *scratch, int len)
-{
- int n;
- char c;
-
- scratch[len - 1] = '\0';
- while(1){
- c = token(fd, scratch, len - 1, ':');
- if(c <= 0)
- return(0);
- else if(c != ':'){
- printk("Failed to find ':' in /proc/cpuinfo\n");
- return(0);
- }
-
- if(!strncmp(scratch, key, strlen(key)))
- return(1);
-
- do {
- n = os_read_file(fd, &c, sizeof(c));
- if(n != sizeof(c)){
- printk("Failed to find newline in "
- "/proc/cpuinfo, err = %d\n", -n);
- return(0);
- }
- } while(c != '\n');
- }
- return(0);
-}
-
-int cpu_feature(char *what, char *buf, int len)
-{
- int fd, ret = 0;
-
- fd = os_open_file("/proc/cpuinfo", of_read(OPENFLAGS()), 0);
- if(fd < 0){
- printk("Couldn't open /proc/cpuinfo, err = %d\n", -fd);
- return(0);
- }
-
- if(!find_cpuinfo_line(fd, what, buf, len)){
- printk("Couldn't find '%s' line in /proc/cpuinfo\n", what);
- goto out_close;
- }
-
- token(fd, buf, len, '\n');
- ret = 1;
-
- out_close:
- os_close_file(fd);
- return(ret);
-}
-
-/* Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
diff --git a/arch/um/sys-x86_64/fault.c b/arch/um/sys-x86_64/fault.c
index cee1513..4636b14 100644
--- a/arch/um/sys-x86_64/fault.c
+++ b/arch/um/sys-x86_64/fault.c
@@ -4,20 +4,24 @@
* Licensed under the GPL
*/
-#include "user.h"
+#include "sysdep/ptrace.h"
-int arch_fixup(unsigned long address, void *sc_ptr)
+/* These two are from asm-um/uaccess.h and linux/module.h, check them. */
+struct exception_table_entry
{
- /* XXX search_exception_tables() */
+ unsigned long insn;
+ unsigned long fixup;
+};
+
+const struct exception_table_entry *search_exception_tables(unsigned long add);
+int arch_fixup(unsigned long address, union uml_pt_regs *regs)
+{
+ const struct exception_table_entry *fixup;
+
+ fixup = search_exception_tables(address);
+ if(fixup != 0){
+ UPT_IP(regs) = fixup->fixup;
+ return(1);
+ }
return(0);
}
-
-/* Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
diff --git a/arch/um/sys-x86_64/signal.c b/arch/um/sys-x86_64/signal.c
index af2f017..fe8ec04 100644
--- a/arch/um/sys-x86_64/signal.c
+++ b/arch/um/sys-x86_64/signal.c
@@ -20,6 +20,36 @@
#include "skas.h"
+void copy_sc(union uml_pt_regs *regs, void *from)
+{
+ struct sigcontext *sc = from;
+
+#define GETREG(regs, regno, sc, regname) \
+ (regs)->skas.regs[(regno) / sizeof(unsigned long)] = (sc)->regname
+
+ GETREG(regs, R8, sc, r8);
+ GETREG(regs, R9, sc, r9);
+ GETREG(regs, R10, sc, r10);
+ GETREG(regs, R11, sc, r11);
+ GETREG(regs, R12, sc, r12);
+ GETREG(regs, R13, sc, r13);
+ GETREG(regs, R14, sc, r14);
+ GETREG(regs, R15, sc, r15);
+ GETREG(regs, RDI, sc, rdi);
+ GETREG(regs, RSI, sc, rsi);
+ GETREG(regs, RBP, sc, rbp);
+ GETREG(regs, RBX, sc, rbx);
+ GETREG(regs, RDX, sc, rdx);
+ GETREG(regs, RAX, sc, rax);
+ GETREG(regs, RCX, sc, rcx);
+ GETREG(regs, RSP, sc, rsp);
+ GETREG(regs, RIP, sc, rip);
+ GETREG(regs, EFLAGS, sc, eflags);
+ GETREG(regs, CS, sc, cs);
+
+#undef GETREG
+}
+
static int copy_sc_from_user_skas(struct pt_regs *regs,
struct sigcontext __user *from)
{
@@ -51,7 +81,7 @@
#undef GETREG
- return(err);
+ return err;
}
int copy_sc_to_user_skas(struct sigcontext __user *to,
diff --git a/arch/um/sys-x86_64/user-offsets.c b/arch/um/sys-x86_64/user-offsets.c
index 899cebb..0d5fd76 100644
--- a/arch/um/sys-x86_64/user-offsets.c
+++ b/arch/um/sys-x86_64/user-offsets.c
@@ -2,6 +2,7 @@
#include <stddef.h>
#include <signal.h>
#include <sys/poll.h>
+#include <sys/mman.h>
#define __FRAME_OFFSETS
#include <asm/ptrace.h>
#include <asm/types.h>
@@ -57,7 +58,6 @@
OFFSET(HOST_SC_SS, sigcontext, ss);
#endif
- DEFINE_LONGS(HOST_FRAME_SIZE, FRAME_SIZE);
DEFINE(HOST_FP_SIZE, sizeof(struct _fpstate) / sizeof(unsigned long));
DEFINE(HOST_XFP_SIZE, 0);
DEFINE_LONGS(HOST_RBX, RBX);
@@ -94,4 +94,8 @@
DEFINE(UM_POLLIN, POLLIN);
DEFINE(UM_POLLPRI, POLLPRI);
DEFINE(UM_POLLOUT, POLLOUT);
+
+ DEFINE(UM_PROT_READ, PROT_READ);
+ DEFINE(UM_PROT_WRITE, PROT_WRITE);
+ DEFINE(UM_PROT_EXEC, PROT_EXEC);
}
diff --git a/arch/v850/Kconfig b/arch/v850/Kconfig
index 50ccc7f..5f54c12 100644
--- a/arch/v850/Kconfig
+++ b/arch/v850/Kconfig
@@ -37,6 +37,10 @@
bool
default y
+config GENERIC_TIME
+ bool
+ default y
+
config TIME_LOW_RES
bool
default y
diff --git a/arch/v850/kernel/time.c b/arch/v850/kernel/time.c
index 486e3a4..f0905b0 100644
--- a/arch/v850/kernel/time.c
+++ b/arch/v850/kernel/time.c
@@ -90,81 +90,6 @@
return IRQ_HANDLED;
}
-/*
- * This version of gettimeofday has near microsecond resolution.
- */
-void do_gettimeofday (struct timeval *tv)
-{
-#if 0 /* DAVIDM later if possible */
- extern volatile unsigned long lost_ticks;
- unsigned long lost;
-#endif
- unsigned long flags;
- unsigned long usec, sec;
- unsigned long seq;
-
- do {
- seq = read_seqbegin_irqsave(&xtime_lock, flags);
-
-#if 0
- usec = mach_gettimeoffset ? mach_gettimeoffset () : 0;
-#else
- usec = 0;
-#endif
-#if 0 /* DAVIDM later if possible */
- lost = lost_ticks;
- if (lost)
- usec += lost * (1000000/HZ);
-#endif
- sec = xtime.tv_sec;
- usec += xtime.tv_nsec / 1000;
- } while (read_seqretry_irqrestore(&xtime_lock, seq, flags));
-
- while (usec >= 1000000) {
- usec -= 1000000;
- sec++;
- }
-
- tv->tv_sec = sec;
- tv->tv_usec = usec;
-}
-
-EXPORT_SYMBOL(do_gettimeofday);
-
-int do_settimeofday(struct timespec *tv)
-{
- if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC)
- return -EINVAL;
-
- write_seqlock_irq (&xtime_lock);
-
- /* This is revolting. We need to set the xtime.tv_nsec
- * correctly. However, the value in this location is
- * is value at the last tick.
- * Discover what correction gettimeofday
- * would have done, and then undo it!
- */
-#if 0
- tv->tv_nsec -= mach_gettimeoffset() * 1000;
-#endif
-
- while (tv->tv_nsec < 0) {
- tv->tv_nsec += NSEC_PER_SEC;
- tv->tv_sec--;
- }
-
- xtime.tv_sec = tv->tv_sec;
- xtime.tv_nsec = tv->tv_nsec;
-
- ntp_clear();
-
- write_sequnlock_irq (&xtime_lock);
- clock_was_set();
- return 0;
-}
-
-EXPORT_SYMBOL(do_settimeofday);
-
static int timer_dev_id;
static struct irqaction timer_irqaction = {
timer_interrupt,
diff --git a/arch/x86_64/kernel/e820.c b/arch/x86_64/kernel/e820.c
index be89654..13c6c37 100644
--- a/arch/x86_64/kernel/e820.c
+++ b/arch/x86_64/kernel/e820.c
@@ -17,6 +17,8 @@
#include <linux/kexec.h>
#include <linux/module.h>
#include <linux/mm.h>
+#include <linux/suspend.h>
+#include <linux/pfn.h>
#include <asm/pgtable.h>
#include <asm/page.h>
@@ -256,22 +258,6 @@
}
}
-/* Mark pages corresponding to given address range as nosave */
-static void __init
-e820_mark_nosave_range(unsigned long start, unsigned long end)
-{
- unsigned long pfn, max_pfn;
-
- if (start >= end)
- return;
-
- printk("Nosave address range: %016lx - %016lx\n", start, end);
- max_pfn = end >> PAGE_SHIFT;
- for (pfn = start >> PAGE_SHIFT; pfn < max_pfn; pfn++)
- if (pfn_valid(pfn))
- SetPageNosave(pfn_to_page(pfn));
-}
-
/*
* Find the ranges of physical addresses that do not correspond to
* e820 RAM areas and mark the corresponding pages as nosave for software
@@ -290,13 +276,13 @@
struct e820entry *ei = &e820.map[i];
if (paddr < ei->addr)
- e820_mark_nosave_range(paddr,
- round_up(ei->addr, PAGE_SIZE));
+ register_nosave_region(PFN_DOWN(paddr),
+ PFN_UP(ei->addr));
paddr = round_down(ei->addr + ei->size, PAGE_SIZE);
if (ei->type != E820_RAM)
- e820_mark_nosave_range(round_up(ei->addr, PAGE_SIZE),
- paddr);
+ register_nosave_region(PFN_UP(ei->addr),
+ PFN_DOWN(paddr));
if (paddr >= (end_pfn << PAGE_SHIFT))
break;
diff --git a/arch/x86_64/kernel/machine_kexec.c b/arch/x86_64/kernel/machine_kexec.c
index a8bb33c..c3a5547 100644
--- a/arch/x86_64/kernel/machine_kexec.c
+++ b/arch/x86_64/kernel/machine_kexec.c
@@ -189,21 +189,21 @@
control_page = page_address(image->control_code_page) + PAGE_SIZE;
memcpy(control_page, relocate_kernel, PAGE_SIZE);
- page_list[PA_CONTROL_PAGE] = __pa(control_page);
+ page_list[PA_CONTROL_PAGE] = virt_to_phys(control_page);
page_list[VA_CONTROL_PAGE] = (unsigned long)relocate_kernel;
- page_list[PA_PGD] = __pa_symbol(&kexec_pgd);
+ page_list[PA_PGD] = virt_to_phys(&kexec_pgd);
page_list[VA_PGD] = (unsigned long)kexec_pgd;
- page_list[PA_PUD_0] = __pa_symbol(&kexec_pud0);
+ page_list[PA_PUD_0] = virt_to_phys(&kexec_pud0);
page_list[VA_PUD_0] = (unsigned long)kexec_pud0;
- page_list[PA_PMD_0] = __pa_symbol(&kexec_pmd0);
+ page_list[PA_PMD_0] = virt_to_phys(&kexec_pmd0);
page_list[VA_PMD_0] = (unsigned long)kexec_pmd0;
- page_list[PA_PTE_0] = __pa_symbol(&kexec_pte0);
+ page_list[PA_PTE_0] = virt_to_phys(&kexec_pte0);
page_list[VA_PTE_0] = (unsigned long)kexec_pte0;
- page_list[PA_PUD_1] = __pa_symbol(&kexec_pud1);
+ page_list[PA_PUD_1] = virt_to_phys(&kexec_pud1);
page_list[VA_PUD_1] = (unsigned long)kexec_pud1;
- page_list[PA_PMD_1] = __pa_symbol(&kexec_pmd1);
+ page_list[PA_PMD_1] = virt_to_phys(&kexec_pmd1);
page_list[VA_PMD_1] = (unsigned long)kexec_pmd1;
- page_list[PA_PTE_1] = __pa_symbol(&kexec_pte1);
+ page_list[PA_PTE_1] = virt_to_phys(&kexec_pte1);
page_list[VA_PTE_1] = (unsigned long)kexec_pte1;
page_list[PA_TABLE_PAGE] =
diff --git a/arch/x86_64/kernel/setup.c b/arch/x86_64/kernel/setup.c
index db30b5b..db51577 100644
--- a/arch/x86_64/kernel/setup.c
+++ b/arch/x86_64/kernel/setup.c
@@ -245,12 +245,11 @@
init_mm.end_code = (unsigned long) &_etext;
init_mm.end_data = (unsigned long) &_edata;
init_mm.brk = (unsigned long) &_end;
- init_mm.pgd = __va(__pa_symbol(&init_level4_pgt));
- code_resource.start = __pa_symbol(&_text);
- code_resource.end = __pa_symbol(&_etext)-1;
- data_resource.start = __pa_symbol(&_etext);
- data_resource.end = __pa_symbol(&_edata)-1;
+ code_resource.start = virt_to_phys(&_text);
+ code_resource.end = virt_to_phys(&_etext)-1;
+ data_resource.start = virt_to_phys(&_etext);
+ data_resource.end = virt_to_phys(&_edata)-1;
early_identify_cpu(&boot_cpu_data);
diff --git a/arch/x86_64/kernel/smp.c b/arch/x86_64/kernel/smp.c
index 22abae4..bd1d123 100644
--- a/arch/x86_64/kernel/smp.c
+++ b/arch/x86_64/kernel/smp.c
@@ -76,7 +76,7 @@
if (read_pda(mmu_state) == TLBSTATE_OK)
BUG();
cpu_clear(cpu, read_pda(active_mm)->cpu_vm_mask);
- load_cr3(init_mm.pgd);
+ load_cr3(swapper_pg_dir);
}
/*
diff --git a/arch/x86_64/kernel/sys_x86_64.c b/arch/x86_64/kernel/sys_x86_64.c
index 76bf7c2..f891931 100644
--- a/arch/x86_64/kernel/sys_x86_64.c
+++ b/arch/x86_64/kernel/sys_x86_64.c
@@ -93,6 +93,9 @@
unsigned long start_addr;
unsigned long begin, end;
+ if (flags & MAP_FIXED)
+ return addr;
+
find_start_end(flags, &begin, &end);
if (len > end)
diff --git a/arch/x86_64/mm/init.c b/arch/x86_64/mm/init.c
index 282b0a8..c082268 100644
--- a/arch/x86_64/mm/init.c
+++ b/arch/x86_64/mm/init.c
@@ -572,13 +572,13 @@
printk(KERN_INFO "Freeing %s: %luk freed\n", what, (end - begin) >> 10);
for (addr = begin; addr < end; addr += PAGE_SIZE) {
- struct page *page = pfn_to_page(addr >> PAGE_SHIFT);
- ClearPageReserved(page);
- init_page_count(page);
- memset(page_address(page), POISON_FREE_INITMEM, PAGE_SIZE);
+ ClearPageReserved(virt_to_page(addr));
+ init_page_count(virt_to_page(addr));
+ memset((void *)(addr & ~(PAGE_SIZE-1)),
+ POISON_FREE_INITMEM, PAGE_SIZE);
if (addr >= __START_KERNEL_map)
change_page_attr_addr(addr, 1, __pgprot(0));
- __free_page(page);
+ free_page(addr);
totalram_pages++;
}
if (addr > __START_KERNEL_map)
@@ -588,26 +588,31 @@
void free_initmem(void)
{
free_init_pages("unused kernel memory",
- __pa_symbol(&__init_begin),
- __pa_symbol(&__init_end));
+ (unsigned long)(&__init_begin),
+ (unsigned long)(&__init_end));
}
#ifdef CONFIG_DEBUG_RODATA
void mark_rodata_ro(void)
{
- unsigned long start = PFN_ALIGN(__va(__pa_symbol(&_stext))), size;
+ unsigned long start = (unsigned long)_stext, end;
#ifdef CONFIG_HOTPLUG_CPU
/* It must still be possible to apply SMP alternatives. */
if (num_possible_cpus() > 1)
- start = PFN_ALIGN(__va(__pa_symbol(&_etext)));
+ start = (unsigned long)_etext;
#endif
- size = (unsigned long)__va(__pa_symbol(&__end_rodata)) - start;
- change_page_attr_addr(start, size >> PAGE_SHIFT, PAGE_KERNEL_RO);
+ end = (unsigned long)__end_rodata;
+ start = (start + PAGE_SIZE - 1) & PAGE_MASK;
+ end &= PAGE_MASK;
+ if (end <= start)
+ return;
+
+ change_page_attr_addr(start, (end - start) >> PAGE_SHIFT, PAGE_KERNEL_RO);
printk(KERN_INFO "Write protecting the kernel read-only data: %luk\n",
- size >> 10);
+ (end - start) >> 10);
/*
* change_page_attr_addr() requires a global_flush_tlb() call after it.
@@ -622,7 +627,7 @@
#ifdef CONFIG_BLK_DEV_INITRD
void free_initrd_mem(unsigned long start, unsigned long end)
{
- free_init_pages("initrd memory", __pa(start), __pa(end));
+ free_init_pages("initrd memory", start, end);
}
#endif
diff --git a/arch/x86_64/mm/ioremap.c b/arch/x86_64/mm/ioremap.c
index c6e5e8d..6cac90a 100644
--- a/arch/x86_64/mm/ioremap.c
+++ b/arch/x86_64/mm/ioremap.c
@@ -13,12 +13,21 @@
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/io.h>
+
#include <asm/pgalloc.h>
#include <asm/fixmap.h>
#include <asm/tlbflush.h>
#include <asm/cacheflush.h>
#include <asm/proto.h>
+unsigned long __phys_addr(unsigned long x)
+{
+ if (x >= __START_KERNEL_map)
+ return x - __START_KERNEL_map + phys_base;
+ return x - PAGE_OFFSET;
+}
+EXPORT_SYMBOL(__phys_addr);
+
#define ISA_START_ADDRESS 0xa0000
#define ISA_END_ADDRESS 0x100000
diff --git a/arch/x86_64/mm/pageattr.c b/arch/x86_64/mm/pageattr.c
index bf4aa8d..d653d0b 100644
--- a/arch/x86_64/mm/pageattr.c
+++ b/arch/x86_64/mm/pageattr.c
@@ -51,6 +51,7 @@
SetPagePrivate(base);
page_private(base) = 0;
+ address = __pa(address);
addr = address & LARGE_PAGE_MASK;
pbase = (pte_t *)page_address(base);
for (i = 0; i < PTRS_PER_PTE; i++, addr += PAGE_SIZE) {
@@ -100,12 +101,13 @@
* No more special protections in this 2/4MB area - revert to a
* large page again.
*/
-static void revert_page(unsigned long address, unsigned long pfn, pgprot_t ref_prot)
+static void revert_page(unsigned long address, pgprot_t ref_prot)
{
pgd_t *pgd;
pud_t *pud;
pmd_t *pmd;
pte_t large_pte;
+ unsigned long pfn;
pgd = pgd_offset_k(address);
BUG_ON(pgd_none(*pgd));
@@ -113,6 +115,7 @@
BUG_ON(pud_none(*pud));
pmd = pmd_offset(pud, address);
BUG_ON(pmd_val(*pmd) & _PAGE_PSE);
+ pfn = (__pa(address) & LARGE_PAGE_MASK) >> PAGE_SHIFT;
large_pte = pfn_pte(pfn, ref_prot);
large_pte = pte_mkhuge(large_pte);
set_pte((pte_t *)pmd, large_pte);
@@ -138,8 +141,7 @@
*/
struct page *split;
ref_prot2 = pte_pgprot(pte_clrhuge(*kpte));
- split = split_large_page(pfn << PAGE_SHIFT, prot,
- ref_prot2);
+ split = split_large_page(address, prot, ref_prot2);
if (!split)
return -ENOMEM;
set_pte(kpte, mk_pte(split, ref_prot2));
@@ -158,7 +160,7 @@
if (page_private(kpte_page) == 0) {
save_page(kpte_page);
- revert_page(address, pfn, ref_prot);
+ revert_page(address, ref_prot);
}
return 0;
}
@@ -178,7 +180,6 @@
*/
int change_page_attr_addr(unsigned long address, int numpages, pgprot_t prot)
{
- unsigned long phys_base_pfn = __pa_symbol(__START_KERNEL_map) >> PAGE_SHIFT;
int err = 0, kernel_map = 0;
int i;
@@ -199,11 +200,10 @@
}
/* Handle kernel mapping too which aliases part of the
* lowmem */
- if ((pfn >= phys_base_pfn) &&
- ((pfn - phys_base_pfn) < (KERNEL_TEXT_SIZE >> PAGE_SHIFT))) {
+ if (__pa(address) < KERNEL_TEXT_SIZE) {
unsigned long addr2;
pgprot_t prot2;
- addr2 = __START_KERNEL_map + ((pfn - phys_base_pfn) << PAGE_SHIFT);
+ addr2 = __START_KERNEL_map + __pa(address);
/* Make sure the kernel mappings stay executable */
prot2 = pte_pgprot(pte_mkexec(pfn_pte(0, prot)));
err = __change_page_attr(addr2, pfn, prot2,
diff --git a/arch/xtensa/platform-iss/network.c b/arch/xtensa/platform-iss/network.c
index ab05bff..4bfe333 100644
--- a/arch/xtensa/platform-iss/network.c
+++ b/arch/xtensa/platform-iss/network.c
@@ -251,7 +251,7 @@
memset(&ifr, 0, sizeof ifr);
ifr.ifr_flags = IFF_TAP | IFF_NO_PI;
- strlcpy(ifr.ifr_name, dev_name, sizeof ifr.ifr_name - 1);
+ strlcpy(ifr.ifr_name, dev_name, sizeof ifr.ifr_name);
if ((err = simc_ioctl(fd, TUNSETIFF, (void*) &ifr)) < 0) {
printk("Failed to set interface, returned %d "
diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c
index 64df3fa..baef5fc 100644
--- a/block/cfq-iosched.c
+++ b/block/cfq-iosched.c
@@ -2090,13 +2090,11 @@
static int __init cfq_slab_setup(void)
{
- cfq_pool = kmem_cache_create("cfq_pool", sizeof(struct cfq_queue), 0, 0,
- NULL, NULL);
+ cfq_pool = KMEM_CACHE(cfq_queue, 0);
if (!cfq_pool)
goto fail;
- cfq_ioc_pool = kmem_cache_create("cfq_ioc_pool",
- sizeof(struct cfq_io_context), 0, 0, NULL, NULL);
+ cfq_ioc_pool = KMEM_CACHE(cfq_io_context, 0);
if (!cfq_ioc_pool)
goto fail;
diff --git a/block/ioctl.c b/block/ioctl.c
index e06dbe9..f7e3e8a 100644
--- a/block/ioctl.c
+++ b/block/ioctl.c
@@ -80,7 +80,7 @@
}
/* all seems OK */
fsync_bdev(bdevp);
- invalidate_bdev(bdevp, 0);
+ invalidate_bdev(bdevp);
mutex_lock_nested(&bdev->bd_mutex, 1);
delete_partition(disk, part);
@@ -236,7 +236,7 @@
lock_kernel();
fsync_bdev(bdev);
- invalidate_bdev(bdev, 0);
+ invalidate_bdev(bdev);
unlock_kernel();
return 0;
diff --git a/drivers/acpi/sleep/proc.c b/drivers/acpi/sleep/proc.c
index 2d912b7..dcde9ddd 100644
--- a/drivers/acpi/sleep/proc.c
+++ b/drivers/acpi/sleep/proc.c
@@ -60,7 +60,7 @@
state = simple_strtoul(str, NULL, 0);
#ifdef CONFIG_SOFTWARE_SUSPEND
if (state == 4) {
- error = software_suspend();
+ error = pm_suspend(PM_SUSPEND_DISK);
goto Done;
}
#endif
diff --git a/drivers/base/Makefile b/drivers/base/Makefile
index e9eb738..b39ea3f 100644
--- a/drivers/base/Makefile
+++ b/drivers/base/Makefile
@@ -2,10 +2,10 @@
obj-y := core.o sys.o bus.o dd.o \
driver.o class.o platform.o \
- cpu.o firmware.o init.o map.o dmapool.o \
- dma-mapping.o devres.o \
+ cpu.o firmware.o init.o map.o devres.o \
attribute_container.o transport_class.o
obj-y += power/
+obj-$(CONFIG_HAS_DMA) += dma-mapping.o dmapool.o
obj-$(CONFIG_ISA) += isa.o
obj-$(CONFIG_FW_LOADER) += firmware_class.o
obj-$(CONFIG_NUMA) += node.o
diff --git a/drivers/block/amiflop.c b/drivers/block/amiflop.c
index 5d65621..27a1390 100644
--- a/drivers/block/amiflop.c
+++ b/drivers/block/amiflop.c
@@ -1480,7 +1480,7 @@
break;
case FDFMTEND:
floppy_off(drive);
- invalidate_bdev(inode->i_bdev, 0);
+ invalidate_bdev(inode->i_bdev);
break;
case FDGETPRM:
memset((void *)&getprm, 0, sizeof (getprm));
diff --git a/drivers/block/loop.c b/drivers/block/loop.c
index 6b5b642..0d4ccd4 100644
--- a/drivers/block/loop.c
+++ b/drivers/block/loop.c
@@ -833,7 +833,7 @@
lo->lo_backing_file = NULL;
lo->lo_flags = 0;
set_capacity(disks[lo->lo_number], 0);
- invalidate_bdev(bdev, 0);
+ invalidate_bdev(bdev);
bd_set_size(bdev, 0);
mapping_set_gfp_mask(mapping, lo->old_gfp_mask);
lo->lo_state = Lo_unbound;
@@ -917,7 +917,7 @@
memset(lo->lo_encrypt_key, 0, LO_KEY_SIZE);
memset(lo->lo_crypt_name, 0, LO_NAME_SIZE);
memset(lo->lo_file_name, 0, LO_NAME_SIZE);
- invalidate_bdev(bdev, 0);
+ invalidate_bdev(bdev);
set_capacity(disks[lo->lo_number], 0);
bd_set_size(bdev, 0);
mapping_set_gfp_mask(filp->f_mapping, gfp);
diff --git a/drivers/block/rd.c b/drivers/block/rd.c
index 485aa87..43d4ebc 100644
--- a/drivers/block/rd.c
+++ b/drivers/block/rd.c
@@ -403,7 +403,7 @@
struct block_device *bdev = rd_bdev[i];
rd_bdev[i] = NULL;
if (bdev) {
- invalidate_bdev(bdev, 1);
+ invalidate_bdev(bdev);
blkdev_put(bdev);
}
del_gendisk(rd_disks[i]);
diff --git a/drivers/cdrom/cdrom.c b/drivers/cdrom/cdrom.c
index b36f44d..3625a05 100644
--- a/drivers/cdrom/cdrom.c
+++ b/drivers/cdrom/cdrom.c
@@ -2384,7 +2384,7 @@
return -EACCES;
if (!CDROM_CAN(CDC_RESET))
return -ENOSYS;
- invalidate_bdev(bdev, 0);
+ invalidate_bdev(bdev);
return cdi->ops->reset(cdi);
}
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index d0c978f..a26d917 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -905,8 +905,8 @@
To compile this driver as a module, choose M here: the
module will be called sonypi.
-config TANBAC_TB0219
- tristate "TANBAC TB0219 base board support"
+config GPIO_TB0219
+ tristate "TANBAC TB0219 GPIO support"
depends on TANBAC_TB022X
select GPIO_VR41XX
diff --git a/drivers/char/Makefile b/drivers/char/Makefile
index ae8567c..2f56ecc 100644
--- a/drivers/char/Makefile
+++ b/drivers/char/Makefile
@@ -91,7 +91,7 @@
obj-$(CONFIG_NSC_GPIO) += nsc_gpio.o
obj-$(CONFIG_CS5535_GPIO) += cs5535_gpio.o
obj-$(CONFIG_GPIO_VR41XX) += vr41xx_giu.o
-obj-$(CONFIG_TANBAC_TB0219) += tb0219.o
+obj-$(CONFIG_GPIO_TB0219) += tb0219.o
obj-$(CONFIG_TELCLOCK) += tlclk.o
obj-$(CONFIG_WATCHDOG) += watchdog/
diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c
index 7a32df5..389da36 100644
--- a/drivers/char/tty_io.c
+++ b/drivers/char/tty_io.c
@@ -3720,11 +3720,10 @@
if (driver->flags & TTY_DRIVER_INSTALLED)
return 0;
- if (!(driver->flags & TTY_DRIVER_DEVPTS_MEM)) {
- p = kmalloc(driver->num * 3 * sizeof(void *), GFP_KERNEL);
+ if (!(driver->flags & TTY_DRIVER_DEVPTS_MEM) && driver->num) {
+ p = kzalloc(driver->num * 3 * sizeof(void *), GFP_KERNEL);
if (!p)
return -ENOMEM;
- memset(p, 0, driver->num * 3 * sizeof(void *));
}
if (!driver->major) {
diff --git a/drivers/i2c/chips/tps65010.c b/drivers/i2c/chips/tps65010.c
index 214fbb1..7ed92dc 100644
--- a/drivers/i2c/chips/tps65010.c
+++ b/drivers/i2c/chips/tps65010.c
@@ -351,8 +351,10 @@
#if 0
/* REVISIT: this might need its own workqueue
* plus tweaks including deadlock avoidance ...
+ * also needs to get error handling and probably
+ * an #ifdef CONFIG_SOFTWARE_SUSPEND
*/
- software_suspend();
+ pm_suspend(PM_SUSPEND_DISK);
#endif
poll = 1;
}
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 509171c..2b4315d 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -3080,7 +3080,7 @@
if (test_bit(Faulty, &rdev->flags))
continue;
sync_blockdev(rdev->bdev);
- invalidate_bdev(rdev->bdev, 0);
+ invalidate_bdev(rdev->bdev);
}
md_probe(mddev->unit, NULL, NULL);
diff --git a/drivers/media/video/cx88/cx88-alsa.c b/drivers/media/video/cx88/cx88-alsa.c
index 3956c25..2d666b5 100644
--- a/drivers/media/video/cx88/cx88-alsa.c
+++ b/drivers/media/video/cx88/cx88-alsa.c
@@ -27,6 +27,8 @@
#include <linux/init.h>
#include <linux/device.h>
#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
+
#include <asm/delay.h>
#include <sound/driver.h>
#include <sound/core.h>
diff --git a/drivers/media/video/cx88/cx88-mpeg.c b/drivers/media/video/cx88/cx88-mpeg.c
index b2eb32e..2ebde2f 100644
--- a/drivers/media/video/cx88/cx88-mpeg.c
+++ b/drivers/media/video/cx88/cx88-mpeg.c
@@ -26,6 +26,7 @@
#include <linux/moduleparam.h>
#include <linux/init.h>
#include <linux/device.h>
+#include <linux/dma-mapping.h>
#include <linux/interrupt.h>
#include <asm/delay.h>
diff --git a/drivers/media/video/cx88/cx88-video.c b/drivers/media/video/cx88/cx88-video.c
index fbce1d5..b94ef8a 100644
--- a/drivers/media/video/cx88/cx88-video.c
+++ b/drivers/media/video/cx88/cx88-video.c
@@ -1,4 +1,3 @@
-
/*
*
* device driver for Conexant 2388x based TV cards
@@ -34,6 +33,7 @@
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
#include <linux/delay.h>
#include <linux/kthread.h>
#include <asm/div64.h>
diff --git a/drivers/mtd/devices/block2mtd.c b/drivers/mtd/devices/block2mtd.c
index ce47544..fc4cc8b 100644
--- a/drivers/mtd/devices/block2mtd.c
+++ b/drivers/mtd/devices/block2mtd.c
@@ -40,13 +40,11 @@
static LIST_HEAD(blkmtd_device_list);
-static struct page* page_read(struct address_space *mapping, int index)
+static struct page *page_read(struct address_space *mapping, int index)
{
- filler_t *filler = (filler_t*)mapping->a_ops->readpage;
- return read_cache_page(mapping, index, filler, NULL);
+ return read_mapping_page(mapping, index, NULL);
}
-
/* erase a specified part of the device */
static int _block2mtd_erase(struct block2mtd_dev *dev, loff_t to, size_t len)
{
diff --git a/drivers/mtd/ubi/eba.c b/drivers/mtd/ubi/eba.c
index d847ee1..3dba573 100644
--- a/drivers/mtd/ubi/eba.c
+++ b/drivers/mtd/ubi/eba.c
@@ -940,8 +940,7 @@
{
struct ltree_entry *le = obj;
- if ((flags & (SLAB_CTOR_VERIFY | SLAB_CTOR_CONSTRUCTOR)) !=
- SLAB_CTOR_CONSTRUCTOR)
+ if (flags & SLAB_CTOR_CONSTRUCTOR)
return;
le->users = 0;
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 9e6933a..279ec625 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -822,7 +822,7 @@
tristate "SMC 91C9x/91C1xxx support"
select CRC32
select MII
- depends on NET_ETHERNET && (ARM || REDWOOD_5 || REDWOOD_6 || M32R || SUPERH || SOC_AU1X00)
+ depends on NET_ETHERNET && (ARM || REDWOOD_5 || REDWOOD_6 || M32R || SUPERH || SOC_AU1X00 || BFIN)
help
This is a driver for SMC's 91x series of Ethernet chipsets,
including the SMC91C94 and the SMC91C111. Say Y if you want it
diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h
index d2767e6..7053026 100644
--- a/drivers/net/smc91x.h
+++ b/drivers/net/smc91x.h
@@ -55,6 +55,53 @@
#define SMC_insw(a, r, p, l) readsw((a) + (r), p, l)
#define SMC_outsw(a, r, p, l) writesw((a) + (r), p, l)
+#elif defined(CONFIG_BFIN)
+
+#define SMC_IRQ_FLAGS IRQF_TRIGGER_HIGH
+
+# if defined (CONFIG_BFIN561_EZKIT)
+#define SMC_CAN_USE_8BIT 0
+#define SMC_CAN_USE_16BIT 1
+#define SMC_CAN_USE_32BIT 1
+#define SMC_IO_SHIFT 0
+#define SMC_NOWAIT 1
+#define SMC_USE_BFIN_DMA 0
+
+
+#define SMC_inw(a, r) readw((a) + (r))
+#define SMC_outw(v, a, r) writew(v, (a) + (r))
+#define SMC_inl(a, r) readl((a) + (r))
+#define SMC_outl(v, a, r) writel(v, (a) + (r))
+#define SMC_outsl(a, r, p, l) outsl((unsigned long *)((a) + (r)), p, l)
+#define SMC_insl(a, r, p, l) insl ((unsigned long *)((a) + (r)), p, l)
+# else
+#define SMC_CAN_USE_8BIT 0
+#define SMC_CAN_USE_16BIT 1
+#define SMC_CAN_USE_32BIT 0
+#define SMC_IO_SHIFT 0
+#define SMC_NOWAIT 1
+#define SMC_USE_BFIN_DMA 0
+
+
+#define SMC_inw(a, r) readw((a) + (r))
+#define SMC_outw(v, a, r) writew(v, (a) + (r))
+#define SMC_outsw(a, r, p, l) outsw((unsigned long *)((a) + (r)), p, l)
+#define SMC_insw(a, r, p, l) insw ((unsigned long *)((a) + (r)), p, l)
+# endif
+/* check if the mac in reg is valid */
+#define SMC_GET_MAC_ADDR(addr) \
+ do { \
+ unsigned int __v; \
+ __v = SMC_inw(ioaddr, ADDR0_REG); \
+ addr[0] = __v; addr[1] = __v >> 8; \
+ __v = SMC_inw(ioaddr, ADDR1_REG); \
+ addr[2] = __v; addr[3] = __v >> 8; \
+ __v = SMC_inw(ioaddr, ADDR2_REG); \
+ addr[4] = __v; addr[5] = __v >> 8; \
+ if (*(u32 *)(&addr[0]) == 0xFFFFFFFF) { \
+ random_ether_addr(addr); \
+ } \
+ } while (0)
#elif defined(CONFIG_REDWOOD_5) || defined(CONFIG_REDWOOD_6)
/* We can only do 16-bit reads and writes in the static memory space. */
diff --git a/drivers/pcmcia/at91_cf.c b/drivers/pcmcia/at91_cf.c
index 99baabc..948efc7 100644
--- a/drivers/pcmcia/at91_cf.c
+++ b/drivers/pcmcia/at91_cf.c
@@ -360,7 +360,6 @@
.name = (char *) driver_name,
.owner = THIS_MODULE,
},
- .probe = at91_cf_probe,
.remove = __exit_p(at91_cf_remove),
.suspend = at91_cf_suspend,
.resume = at91_cf_resume,
@@ -370,7 +369,7 @@
static int __init at91_cf_init(void)
{
- return platform_driver_register(&at91_cf_driver);
+ return platform_driver_probe(&at91_cf_driver, at91_cf_probe);
}
module_init(at91_cf_init);
diff --git a/drivers/pcmcia/ds.c b/drivers/pcmcia/ds.c
index 18e111e..143c6ef 100644
--- a/drivers/pcmcia/ds.c
+++ b/drivers/pcmcia/ds.c
@@ -234,6 +234,89 @@
/*======================================================================*/
+struct pcmcia_dynid {
+ struct list_head node;
+ struct pcmcia_device_id id;
+};
+
+/**
+ * pcmcia_store_new_id - add a new PCMCIA device ID to this driver and re-probe devices
+ * @driver: target device driver
+ * @buf: buffer for scanning device ID data
+ * @count: input size
+ *
+ * Adds a new dynamic PCMCIA device ID to this driver,
+ * and causes the driver to probe for all devices again.
+ */
+static ssize_t
+pcmcia_store_new_id(struct device_driver *driver, const char *buf, size_t count)
+{
+ struct pcmcia_dynid *dynid;
+ struct pcmcia_driver *pdrv = to_pcmcia_drv(driver);
+ __u16 match_flags, manf_id, card_id;
+ __u8 func_id, function, device_no;
+ __u32 prod_id_hash[4] = {0, 0, 0, 0};
+ int fields=0;
+ int retval = 0;
+
+ fields = sscanf(buf, "%hx %hx %hx %hhx %hhx %hhx %x %x %x %x",
+ &match_flags, &manf_id, &card_id, &func_id, &function, &device_no,
+ &prod_id_hash[0], &prod_id_hash[1], &prod_id_hash[2], &prod_id_hash[3]);
+ if (fields < 6)
+ return -EINVAL;
+
+ dynid = kzalloc(sizeof(struct pcmcia_dynid), GFP_KERNEL);
+ if (!dynid)
+ return -ENOMEM;
+
+ INIT_LIST_HEAD(&dynid->node);
+ dynid->id.match_flags = match_flags;
+ dynid->id.manf_id = manf_id;
+ dynid->id.card_id = card_id;
+ dynid->id.func_id = func_id;
+ dynid->id.function = function;
+ dynid->id.device_no = device_no;
+ memcpy(dynid->id.prod_id_hash, prod_id_hash, sizeof(__u32) * 4);
+
+ spin_lock(&pdrv->dynids.lock);
+ list_add_tail(&pdrv->dynids.list, &dynid->node);
+ spin_unlock(&pdrv->dynids.lock);
+
+ if (get_driver(&pdrv->drv)) {
+ retval = driver_attach(&pdrv->drv);
+ put_driver(&pdrv->drv);
+ }
+
+ if (retval)
+ return retval;
+ return count;
+}
+static DRIVER_ATTR(new_id, S_IWUSR, NULL, pcmcia_store_new_id);
+
+static void
+pcmcia_free_dynids(struct pcmcia_driver *drv)
+{
+ struct pcmcia_dynid *dynid, *n;
+
+ spin_lock(&drv->dynids.lock);
+ list_for_each_entry_safe(dynid, n, &drv->dynids.list, node) {
+ list_del(&dynid->node);
+ kfree(dynid);
+ }
+ spin_unlock(&drv->dynids.lock);
+}
+
+static int
+pcmcia_create_newid_file(struct pcmcia_driver *drv)
+{
+ int error = 0;
+ if (drv->probe != NULL)
+ error = sysfs_create_file(&drv->drv.kobj,
+ &driver_attr_new_id.attr);
+ return error;
+}
+
+
/**
* pcmcia_register_driver - register a PCMCIA driver with the bus core
*
@@ -241,6 +324,8 @@
*/
int pcmcia_register_driver(struct pcmcia_driver *driver)
{
+ int error;
+
if (!driver)
return -EINVAL;
@@ -249,10 +334,20 @@
/* initialize common fields */
driver->drv.bus = &pcmcia_bus_type;
driver->drv.owner = driver->owner;
+ spin_lock_init(&driver->dynids.lock);
+ INIT_LIST_HEAD(&driver->dynids.list);
ds_dbg(3, "registering driver %s\n", driver->drv.name);
- return driver_register(&driver->drv);
+ error = driver_register(&driver->drv);
+ if (error < 0)
+ return error;
+
+ error = pcmcia_create_newid_file(driver);
+ if (error)
+ driver_unregister(&driver->drv);
+
+ return error;
}
EXPORT_SYMBOL(pcmcia_register_driver);
@@ -263,6 +358,7 @@
{
ds_dbg(3, "unregistering driver %s\n", driver->drv.name);
driver_unregister(&driver->drv);
+ pcmcia_free_dynids(driver);
}
EXPORT_SYMBOL(pcmcia_unregister_driver);
@@ -927,6 +1023,21 @@
struct pcmcia_device * p_dev = to_pcmcia_dev(dev);
struct pcmcia_driver * p_drv = to_pcmcia_drv(drv);
struct pcmcia_device_id *did = p_drv->id_table;
+ struct pcmcia_dynid *dynid;
+
+ /* match dynamic devices first */
+ spin_lock(&p_drv->dynids.lock);
+ list_for_each_entry(dynid, &p_drv->dynids.list, node) {
+ ds_dbg(3, "trying to match %s to %s\n", dev->bus_id,
+ drv->name);
+ if (pcmcia_devmatch(p_dev, &dynid->id)) {
+ ds_dbg(0, "matched %s to %s\n", dev->bus_id,
+ drv->name);
+ spin_unlock(&p_drv->dynids.lock);
+ return 1;
+ }
+ }
+ spin_unlock(&p_drv->dynids.lock);
#ifdef CONFIG_PCMCIA_IOCTL
/* matching by cardmgr */
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 95826b9..ef1eae9 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -354,4 +354,14 @@
This driver can also be built as a module. If so, the module
will be called rtc-v3020.
+config RTC_DRV_BFIN
+ tristate "Blackfin On-Chip RTC"
+ depends on RTC_CLASS && BFIN
+ help
+ If you say yes here you will get support for the
+ Blackfin On-Chip Real Time Clock.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-bfin.
+
endmenu
diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
index 92bfe1b..9218cf2 100644
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -38,3 +38,4 @@
obj-$(CONFIG_RTC_DRV_V3020) += rtc-v3020.o
obj-$(CONFIG_RTC_DRV_AT91RM9200)+= rtc-at91rm9200.o
obj-$(CONFIG_RTC_DRV_SH) += rtc-sh.o
+obj-$(CONFIG_RTC_DRV_BFIN) += rtc-bfin.o
diff --git a/drivers/rtc/rtc-bfin.c b/drivers/rtc/rtc-bfin.c
new file mode 100644
index 0000000..260ead9
--- /dev/null
+++ b/drivers/rtc/rtc-bfin.c
@@ -0,0 +1,445 @@
+/*
+ * Blackfin On-Chip Real Time Clock Driver
+ * Supports BF531/BF532/BF533/BF534/BF536/BF537
+ *
+ * Copyright 2004-2007 Analog Devices Inc.
+ *
+ * Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+/* The biggest issue we deal with in this driver is that register writes are
+ * synced to the RTC frequency of 1Hz. So if you write to a register and
+ * attempt to write again before the first write has completed, the new write
+ * is simply discarded. This can easily be troublesome if userspace disables
+ * one event (say periodic) and then right after enables an event (say alarm).
+ * Since all events are maintained in the same interrupt mask register, if
+ * we wrote to it to disable the first event and then wrote to it again to
+ * enable the second event, that second event would not be enabled as the
+ * write would be discarded and things quickly fall apart.
+ *
+ * To keep this delay from significantly degrading performance (we, in theory,
+ * would have to sleep for up to 1 second everytime we wanted to write a
+ * register), we only check the write pending status before we start to issue
+ * a new write. We bank on the idea that it doesnt matter when the sync
+ * happens so long as we don't attempt another write before it does. The only
+ * time userspace would take this penalty is when they try and do multiple
+ * operations right after another ... but in this case, they need to take the
+ * sync penalty, so we should be OK.
+ *
+ * Also note that the RTC_ISTAT register does not suffer this penalty; its
+ * writes to clear status registers complete immediately.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/bcd.h>
+#include <linux/rtc.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/seq_file.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+
+#include <asm/blackfin.h>
+
+#define stamp(fmt, args...) pr_debug("%s:%i: " fmt "\n", __FUNCTION__, __LINE__, ## args)
+#define stampit() stamp("here i am")
+
+struct bfin_rtc {
+ struct rtc_device *rtc_dev;
+ struct rtc_time rtc_alarm;
+ spinlock_t lock;
+};
+
+/* Bit values for the ISTAT / ICTL registers */
+#define RTC_ISTAT_WRITE_COMPLETE 0x8000
+#define RTC_ISTAT_WRITE_PENDING 0x4000
+#define RTC_ISTAT_ALARM_DAY 0x0040
+#define RTC_ISTAT_24HR 0x0020
+#define RTC_ISTAT_HOUR 0x0010
+#define RTC_ISTAT_MIN 0x0008
+#define RTC_ISTAT_SEC 0x0004
+#define RTC_ISTAT_ALARM 0x0002
+#define RTC_ISTAT_STOPWATCH 0x0001
+
+/* Shift values for RTC_STAT register */
+#define DAY_BITS_OFF 17
+#define HOUR_BITS_OFF 12
+#define MIN_BITS_OFF 6
+#define SEC_BITS_OFF 0
+
+/* Some helper functions to convert between the common RTC notion of time
+ * and the internal Blackfin notion that is stored in 32bits.
+ */
+static inline u32 rtc_time_to_bfin(unsigned long now)
+{
+ u32 sec = (now % 60);
+ u32 min = (now % (60 * 60)) / 60;
+ u32 hour = (now % (60 * 60 * 24)) / (60 * 60);
+ u32 days = (now / (60 * 60 * 24));
+ return (sec << SEC_BITS_OFF) +
+ (min << MIN_BITS_OFF) +
+ (hour << HOUR_BITS_OFF) +
+ (days << DAY_BITS_OFF);
+}
+static inline unsigned long rtc_bfin_to_time(u32 rtc_bfin)
+{
+ return (((rtc_bfin >> SEC_BITS_OFF) & 0x003F)) +
+ (((rtc_bfin >> MIN_BITS_OFF) & 0x003F) * 60) +
+ (((rtc_bfin >> HOUR_BITS_OFF) & 0x001F) * 60 * 60) +
+ (((rtc_bfin >> DAY_BITS_OFF) & 0x7FFF) * 60 * 60 * 24);
+}
+static inline void rtc_bfin_to_tm(u32 rtc_bfin, struct rtc_time *tm)
+{
+ rtc_time_to_tm(rtc_bfin_to_time(rtc_bfin), tm);
+}
+
+/* Wait for the previous write to a RTC register to complete.
+ * Unfortunately, we can't sleep here as that introduces a race condition when
+ * turning on interrupt events. Consider this:
+ * - process sets alarm
+ * - process enables alarm
+ * - process sleeps while waiting for rtc write to sync
+ * - interrupt fires while process is sleeping
+ * - interrupt acks the event by writing to ISTAT
+ * - interrupt sets the WRITE PENDING bit
+ * - interrupt handler finishes
+ * - process wakes up, sees WRITE PENDING bit set, goes to sleep
+ * - interrupt fires while process is sleeping
+ * If anyone can point out the obvious solution here, i'm listening :). This
+ * shouldn't be an issue on an SMP or preempt system as this function should
+ * only be called with the rtc lock held.
+ */
+static void rtc_bfin_sync_pending(void)
+{
+ stampit();
+ while (!(bfin_read_RTC_ISTAT() & RTC_ISTAT_WRITE_COMPLETE)) {
+ if (!(bfin_read_RTC_ISTAT() & RTC_ISTAT_WRITE_PENDING))
+ break;
+ }
+ bfin_write_RTC_ISTAT(RTC_ISTAT_WRITE_COMPLETE);
+}
+
+static void rtc_bfin_reset(struct bfin_rtc *rtc)
+{
+ /* Initialize the RTC. Enable pre-scaler to scale RTC clock
+ * to 1Hz and clear interrupt/status registers. */
+ spin_lock_irq(&rtc->lock);
+ rtc_bfin_sync_pending();
+ bfin_write_RTC_PREN(0x1);
+ bfin_write_RTC_ICTL(0);
+ bfin_write_RTC_SWCNT(0);
+ bfin_write_RTC_ALARM(0);
+ bfin_write_RTC_ISTAT(0xFFFF);
+ spin_unlock_irq(&rtc->lock);
+}
+
+static irqreturn_t bfin_rtc_interrupt(int irq, void *dev_id)
+{
+ struct platform_device *pdev = to_platform_device(dev_id);
+ struct bfin_rtc *rtc = platform_get_drvdata(pdev);
+ unsigned long events = 0;
+ u16 rtc_istat;
+
+ stampit();
+
+ spin_lock_irq(&rtc->lock);
+
+ rtc_istat = bfin_read_RTC_ISTAT();
+
+ if (rtc_istat & (RTC_ISTAT_ALARM | RTC_ISTAT_ALARM_DAY)) {
+ bfin_write_RTC_ISTAT(RTC_ISTAT_ALARM | RTC_ISTAT_ALARM_DAY);
+ events |= RTC_AF | RTC_IRQF;
+ }
+
+ if (rtc_istat & RTC_ISTAT_STOPWATCH) {
+ bfin_write_RTC_ISTAT(RTC_ISTAT_STOPWATCH);
+ events |= RTC_PF | RTC_IRQF;
+ bfin_write_RTC_SWCNT(rtc->rtc_dev->irq_freq);
+ }
+
+ if (rtc_istat & RTC_ISTAT_SEC) {
+ bfin_write_RTC_ISTAT(RTC_ISTAT_SEC);
+ events |= RTC_UF | RTC_IRQF;
+ }
+
+ rtc_update_irq(rtc->rtc_dev, 1, events);
+
+ spin_unlock_irq(&rtc->lock);
+
+ return IRQ_HANDLED;
+}
+
+static int bfin_rtc_open(struct device *dev)
+{
+ struct bfin_rtc *rtc = dev_get_drvdata(dev);
+ int ret;
+
+ stampit();
+
+ ret = request_irq(IRQ_RTC, bfin_rtc_interrupt, IRQF_DISABLED, "rtc-bfin", dev);
+ if (unlikely(ret)) {
+ dev_err(dev, "request RTC IRQ failed with %d\n", ret);
+ return ret;
+ }
+
+ rtc_bfin_reset(rtc);
+
+ return ret;
+}
+
+static void bfin_rtc_release(struct device *dev)
+{
+ struct bfin_rtc *rtc = dev_get_drvdata(dev);
+ stampit();
+ rtc_bfin_reset(rtc);
+ free_irq(IRQ_RTC, dev);
+}
+
+static int bfin_rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
+{
+ struct bfin_rtc *rtc = dev_get_drvdata(dev);
+
+ stampit();
+
+ switch (cmd) {
+ case RTC_PIE_ON:
+ stampit();
+ spin_lock_irq(&rtc->lock);
+ rtc_bfin_sync_pending();
+ bfin_write_RTC_ISTAT(RTC_ISTAT_STOPWATCH);
+ bfin_write_RTC_SWCNT(rtc->rtc_dev->irq_freq);
+ bfin_write_RTC_ICTL(bfin_read_RTC_ICTL() | RTC_ISTAT_STOPWATCH);
+ spin_unlock_irq(&rtc->lock);
+ return 0;
+ case RTC_PIE_OFF:
+ stampit();
+ spin_lock_irq(&rtc->lock);
+ rtc_bfin_sync_pending();
+ bfin_write_RTC_SWCNT(0);
+ bfin_write_RTC_ICTL(bfin_read_RTC_ICTL() & ~RTC_ISTAT_STOPWATCH);
+ spin_unlock_irq(&rtc->lock);
+ return 0;
+
+ case RTC_UIE_ON:
+ stampit();
+ spin_lock_irq(&rtc->lock);
+ rtc_bfin_sync_pending();
+ bfin_write_RTC_ISTAT(RTC_ISTAT_SEC);
+ bfin_write_RTC_ICTL(bfin_read_RTC_ICTL() | RTC_ISTAT_SEC);
+ spin_unlock_irq(&rtc->lock);
+ return 0;
+ case RTC_UIE_OFF:
+ stampit();
+ spin_lock_irq(&rtc->lock);
+ rtc_bfin_sync_pending();
+ bfin_write_RTC_ICTL(bfin_read_RTC_ICTL() & ~RTC_ISTAT_SEC);
+ spin_unlock_irq(&rtc->lock);
+ return 0;
+
+ case RTC_AIE_ON: {
+ unsigned long rtc_alarm;
+ u16 which_alarm;
+ int ret = 0;
+
+ stampit();
+
+ spin_lock_irq(&rtc->lock);
+
+ rtc_bfin_sync_pending();
+ if (rtc->rtc_alarm.tm_yday == -1) {
+ struct rtc_time now;
+ rtc_bfin_to_tm(bfin_read_RTC_STAT(), &now);
+ now.tm_sec = rtc->rtc_alarm.tm_sec;
+ now.tm_min = rtc->rtc_alarm.tm_min;
+ now.tm_hour = rtc->rtc_alarm.tm_hour;
+ ret = rtc_tm_to_time(&now, &rtc_alarm);
+ which_alarm = RTC_ISTAT_ALARM;
+ } else {
+ ret = rtc_tm_to_time(&rtc->rtc_alarm, &rtc_alarm);
+ which_alarm = RTC_ISTAT_ALARM_DAY;
+ }
+ if (ret == 0) {
+ bfin_write_RTC_ISTAT(which_alarm);
+ bfin_write_RTC_ALARM(rtc_time_to_bfin(rtc_alarm));
+ bfin_write_RTC_ICTL(bfin_read_RTC_ICTL() | which_alarm);
+ }
+
+ spin_unlock_irq(&rtc->lock);
+
+ return ret;
+ }
+ case RTC_AIE_OFF:
+ stampit();
+ spin_lock_irq(&rtc->lock);
+ rtc_bfin_sync_pending();
+ bfin_write_RTC_ICTL(bfin_read_RTC_ICTL() & ~(RTC_ISTAT_ALARM | RTC_ISTAT_ALARM_DAY));
+ spin_unlock_irq(&rtc->lock);
+ return 0;
+ }
+
+ return -ENOIOCTLCMD;
+}
+
+static int bfin_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+ struct bfin_rtc *rtc = dev_get_drvdata(dev);
+
+ stampit();
+
+ spin_lock_irq(&rtc->lock);
+ rtc_bfin_sync_pending();
+ rtc_bfin_to_tm(bfin_read_RTC_STAT(), tm);
+ spin_unlock_irq(&rtc->lock);
+
+ return 0;
+}
+
+static int bfin_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+ struct bfin_rtc *rtc = dev_get_drvdata(dev);
+ int ret;
+ unsigned long now;
+
+ stampit();
+
+ spin_lock_irq(&rtc->lock);
+
+ ret = rtc_tm_to_time(tm, &now);
+ if (ret == 0) {
+ rtc_bfin_sync_pending();
+ bfin_write_RTC_STAT(rtc_time_to_bfin(now));
+ }
+
+ spin_unlock_irq(&rtc->lock);
+
+ return ret;
+}
+
+static int bfin_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+ struct bfin_rtc *rtc = dev_get_drvdata(dev);
+ stampit();
+ memcpy(&alrm->time, &rtc->rtc_alarm, sizeof(struct rtc_time));
+ alrm->pending = !!(bfin_read_RTC_ICTL() & (RTC_ISTAT_ALARM | RTC_ISTAT_ALARM_DAY));
+ return 0;
+}
+
+static int bfin_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+ struct bfin_rtc *rtc = dev_get_drvdata(dev);
+ stampit();
+ memcpy(&rtc->rtc_alarm, &alrm->time, sizeof(struct rtc_time));
+ return 0;
+}
+
+static int bfin_rtc_proc(struct device *dev, struct seq_file *seq)
+{
+#define yesno(x) (x ? "yes" : "no")
+ u16 ictl = bfin_read_RTC_ICTL();
+ stampit();
+ seq_printf(seq, "alarm_IRQ\t: %s\n", yesno(ictl & RTC_ISTAT_ALARM));
+ seq_printf(seq, "wkalarm_IRQ\t: %s\n", yesno(ictl & RTC_ISTAT_ALARM_DAY));
+ seq_printf(seq, "seconds_IRQ\t: %s\n", yesno(ictl & RTC_ISTAT_SEC));
+ seq_printf(seq, "periodic_IRQ\t: %s\n", yesno(ictl & RTC_ISTAT_STOPWATCH));
+#ifdef DEBUG
+ seq_printf(seq, "RTC_STAT\t: 0x%08X\n", bfin_read_RTC_STAT());
+ seq_printf(seq, "RTC_ICTL\t: 0x%04X\n", bfin_read_RTC_ICTL());
+ seq_printf(seq, "RTC_ISTAT\t: 0x%04X\n", bfin_read_RTC_ISTAT());
+ seq_printf(seq, "RTC_SWCNT\t: 0x%04X\n", bfin_read_RTC_SWCNT());
+ seq_printf(seq, "RTC_ALARM\t: 0x%08X\n", bfin_read_RTC_ALARM());
+ seq_printf(seq, "RTC_PREN\t: 0x%04X\n", bfin_read_RTC_PREN());
+#endif
+ return 0;
+}
+
+static int bfin_irq_set_freq(struct device *dev, int freq)
+{
+ struct bfin_rtc *rtc = dev_get_drvdata(dev);
+ stampit();
+ rtc->rtc_dev->irq_freq = freq;
+ return 0;
+}
+
+static struct rtc_class_ops bfin_rtc_ops = {
+ .open = bfin_rtc_open,
+ .release = bfin_rtc_release,
+ .ioctl = bfin_rtc_ioctl,
+ .read_time = bfin_rtc_read_time,
+ .set_time = bfin_rtc_set_time,
+ .read_alarm = bfin_rtc_read_alarm,
+ .set_alarm = bfin_rtc_set_alarm,
+ .proc = bfin_rtc_proc,
+ .irq_set_freq = bfin_irq_set_freq,
+};
+
+static int __devinit bfin_rtc_probe(struct platform_device *pdev)
+{
+ struct bfin_rtc *rtc;
+ int ret = 0;
+
+ stampit();
+
+ rtc = kzalloc(sizeof(*rtc), GFP_KERNEL);
+ if (unlikely(!rtc))
+ return -ENOMEM;
+
+ spin_lock_init(&rtc->lock);
+
+ rtc->rtc_dev = rtc_device_register(pdev->name, &pdev->dev, &bfin_rtc_ops, THIS_MODULE);
+ if (unlikely(IS_ERR(rtc))) {
+ ret = PTR_ERR(rtc->rtc_dev);
+ goto err;
+ }
+ rtc->rtc_dev->irq_freq = 0;
+ rtc->rtc_dev->max_user_freq = (2 << 16); /* stopwatch is an unsigned 16 bit reg */
+
+ platform_set_drvdata(pdev, rtc);
+
+ return 0;
+
+err:
+ kfree(rtc);
+ return ret;
+}
+
+static int __devexit bfin_rtc_remove(struct platform_device *pdev)
+{
+ struct bfin_rtc *rtc = platform_get_drvdata(pdev);
+
+ rtc_device_unregister(rtc->rtc_dev);
+ platform_set_drvdata(pdev, NULL);
+ kfree(rtc);
+
+ return 0;
+}
+
+static struct platform_driver bfin_rtc_driver = {
+ .driver = {
+ .name = "rtc-bfin",
+ .owner = THIS_MODULE,
+ },
+ .probe = bfin_rtc_probe,
+ .remove = __devexit_p(bfin_rtc_remove),
+};
+
+static int __init bfin_rtc_init(void)
+{
+ stampit();
+ return platform_driver_register(&bfin_rtc_driver);
+}
+
+static void __exit bfin_rtc_exit(void)
+{
+ platform_driver_unregister(&bfin_rtc_driver);
+}
+
+module_init(bfin_rtc_init);
+module_exit(bfin_rtc_exit);
+
+MODULE_DESCRIPTION("Blackfin On-Chip Real Time Clock Driver");
+MODULE_AUTHOR("Mike Frysinger <vapier@gentoo.org>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 90621c3..c9832d9 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -251,9 +251,16 @@
.fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
.flags = UART_CAP_FIFO | UART_CAP_UUE,
},
+ [PORT_RM9000] = {
+ .name = "RM9000",
+ .fifo_size = 16,
+ .tx_loadsz = 16,
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
+ .flags = UART_CAP_FIFO,
+ },
};
-#ifdef CONFIG_SERIAL_8250_AU1X00
+#if defined (CONFIG_SERIAL_8250_AU1X00)
/* Au1x00 UART hardware has a weird register layout */
static const u8 au_io_in_map[] = {
@@ -289,6 +296,44 @@
return au_io_out_map[offset];
}
+#elif defined (CONFIG_SERIAL_8250_RM9K)
+
+static const u8
+ regmap_in[8] = {
+ [UART_RX] = 0x00,
+ [UART_IER] = 0x0c,
+ [UART_IIR] = 0x14,
+ [UART_LCR] = 0x1c,
+ [UART_MCR] = 0x20,
+ [UART_LSR] = 0x24,
+ [UART_MSR] = 0x28,
+ [UART_SCR] = 0x2c
+ },
+ regmap_out[8] = {
+ [UART_TX] = 0x04,
+ [UART_IER] = 0x0c,
+ [UART_FCR] = 0x18,
+ [UART_LCR] = 0x1c,
+ [UART_MCR] = 0x20,
+ [UART_LSR] = 0x24,
+ [UART_MSR] = 0x28,
+ [UART_SCR] = 0x2c
+ };
+
+static inline int map_8250_in_reg(struct uart_8250_port *up, int offset)
+{
+ if (up->port.iotype != UPIO_RM9000)
+ return offset;
+ return regmap_in[offset];
+}
+
+static inline int map_8250_out_reg(struct uart_8250_port *up, int offset)
+{
+ if (up->port.iotype != UPIO_RM9000)
+ return offset;
+ return regmap_out[offset];
+}
+
#else
/* sane hardware needs no mapping */
@@ -308,8 +353,10 @@
return inb(up->port.iobase + 1);
case UPIO_MEM:
+ case UPIO_DWAPB:
return readb(up->port.membase + offset);
+ case UPIO_RM9000:
case UPIO_MEM32:
return readl(up->port.membase + offset);
@@ -333,6 +380,8 @@
static void
serial_out(struct uart_8250_port *up, int offset, int value)
{
+ /* Save the offset before it's remapped */
+ int save_offset = offset;
offset = map_8250_out_reg(up, offset) << up->port.regshift;
switch (up->port.iotype) {
@@ -345,6 +394,7 @@
writeb(value, up->port.membase + offset);
break;
+ case UPIO_RM9000:
case UPIO_MEM32:
writel(value, up->port.membase + offset);
break;
@@ -359,6 +409,18 @@
writeb(value, up->port.membase + offset);
break;
+ case UPIO_DWAPB:
+ /* Save the LCR value so it can be re-written when a
+ * Busy Detect interrupt occurs. */
+ if (save_offset == UART_LCR)
+ up->lcr = value;
+ writeb(value, up->port.membase + offset);
+ /* Read the IER to ensure any interrupt is cleared before
+ * returning from ISR. */
+ if (save_offset == UART_TX || save_offset == UART_IER)
+ value = serial_in(up, UART_IER);
+ break;
+
default:
outb(value, up->port.iobase + offset);
}
@@ -373,6 +435,7 @@
#ifdef CONFIG_SERIAL_8250_AU1X00
case UPIO_AU:
#endif
+ case UPIO_DWAPB:
serial_out(up, offset, value);
serial_in(up, UART_LCR); /* safe, no side-effects */
break;
@@ -403,7 +466,7 @@
serial_outp(up, UART_DLM, value >> 8 & 0xff);
}
-#ifdef CONFIG_SERIAL_8250_AU1X00
+#if defined (CONFIG_SERIAL_8250_AU1X00)
/* Au1x00 haven't got a standard divisor latch */
static int serial_dl_read(struct uart_8250_port *up)
{
@@ -420,6 +483,24 @@
else
_serial_dl_write(up, value);
}
+#elif defined (CONFIG_SERIAL_8250_RM9K)
+static int serial_dl_read(struct uart_8250_port *up)
+{
+ return (up->port.iotype == UPIO_RM9000) ?
+ (((__raw_readl(up->port.membase + 0x10) << 8) |
+ (__raw_readl(up->port.membase + 0x08) & 0xff)) & 0xffff) :
+ _serial_dl_read(up);
+}
+
+static void serial_dl_write(struct uart_8250_port *up, int value)
+{
+ if (up->port.iotype == UPIO_RM9000) {
+ __raw_writel(value, up->port.membase + 0x08);
+ __raw_writel(value >> 8, up->port.membase + 0x10);
+ } else {
+ _serial_dl_write(up, value);
+ }
+}
#else
#define serial_dl_read(up) _serial_dl_read(up)
#define serial_dl_write(up, value) _serial_dl_write(up, value)
@@ -621,7 +702,7 @@
* its clones. (We treat the broken original StarTech 16650 V1 as a
* 16550, and why not? Startech doesn't seem to even acknowledge its
* existence.)
- *
+ *
* What evil have men's minds wrought...
*/
static void autoconfig_has_efr(struct uart_8250_port *up)
@@ -674,7 +755,7 @@
up->bugs |= UART_BUG_QUOT;
return;
}
-
+
/*
* We check for a XR16C850 by setting DLL and DLM to 0, and then
* reading back DLL and DLM. The chip type depends on the DLM
@@ -817,7 +898,7 @@
status1 &= ~0xB0; /* Disable LOCK, mask out PRESL[01] */
status1 |= 0x10; /* 1.625 divisor for baud_base --> 921600 */
serial_outp(up, 0x04, status1);
-
+
serial_dl_write(up, quot);
serial_outp(up, UART_LCR, 0);
@@ -922,7 +1003,7 @@
/*
* Do a simple existence test first; if we fail this,
* there's no point trying anything else.
- *
+ *
* 0x80 is used as a nonsense port to prevent against
* false positives due to ISA bus float. The
* assumption is that 0x80 is a non-existent port;
@@ -961,7 +1042,7 @@
save_mcr = serial_in(up, UART_MCR);
save_lcr = serial_in(up, UART_LCR);
- /*
+ /*
* Check to see if a UART is really there. Certain broken
* internal modems based on the Rockwell chipset fail this
* test, because they apparently don't implement the loopback
@@ -1068,7 +1149,7 @@
else
serial_outp(up, UART_IER, 0);
- out:
+ out:
spin_unlock_irqrestore(&up->port.lock, flags);
// restore_flags(flags);
DEBUG_AUTOCONF("type=%s\n", uart_config[up->port.type].name);
@@ -1094,7 +1175,7 @@
save_mcr = serial_inp(up, UART_MCR);
save_ier = serial_inp(up, UART_IER);
serial_outp(up, UART_MCR, UART_MCR_OUT1 | UART_MCR_OUT2);
-
+
irqs = probe_irq_on();
serial_outp(up, UART_MCR, 0);
udelay (10);
@@ -1159,8 +1240,11 @@
if (up->bugs & UART_BUG_TXEN) {
unsigned char lsr, iir;
lsr = serial_in(up, UART_LSR);
- iir = serial_in(up, UART_IIR);
- if (lsr & UART_LSR_TEMT && iir & UART_IIR_NO_INT)
+ iir = serial_in(up, UART_IIR) & 0x0f;
+ if ((up->port.type == PORT_RM9000) ?
+ (lsr & UART_LSR_THRE &&
+ (iir == UART_IIR_NO_INT || iir == UART_IIR_THRI)) :
+ (lsr & UART_LSR_TEMT && iir & UART_IIR_NO_INT))
transmit_chars(up);
}
}
@@ -1389,6 +1473,19 @@
handled = 1;
end = NULL;
+ } else if (up->port.iotype == UPIO_DWAPB &&
+ (iir & UART_IIR_BUSY) == UART_IIR_BUSY) {
+ /* The DesignWare APB UART has an Busy Detect (0x07)
+ * interrupt meaning an LCR write attempt occured while the
+ * UART was busy. The interrupt must be cleared by reading
+ * the UART status register (USR) and the LCR re-written. */
+ unsigned int status;
+ status = *(volatile u32 *)up->port.private_data;
+ serial_out(up, UART_LCR, up->lcr);
+
+ handled = 1;
+
+ end = NULL;
} else if (end == NULL)
end = l;
@@ -1928,7 +2025,7 @@
/*
* Ask the core to calculate the divisor for us.
*/
- baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
+ baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
quot = serial8250_get_divisor(port, baud);
/*
@@ -2090,6 +2187,7 @@
case UPIO_TSI:
case UPIO_MEM32:
case UPIO_MEM:
+ case UPIO_DWAPB:
if (!up->port.mapbase)
break;
@@ -2127,6 +2225,7 @@
case UPIO_TSI:
case UPIO_MEM32:
case UPIO_MEM:
+ case UPIO_DWAPB:
if (!up->port.mapbase)
break;
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index ad9f321..924e9bd 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -254,6 +254,15 @@
to this option. The driver can handle 1 or 2 serial ports.
If unsure, say N.
+config SERIAL_8250_RM9K
+ bool "Support for MIPS RM9xxx integrated serial port"
+ depends on SERIAL_8250 != n && SERIAL_RM9000
+ select SERIAL_8250_SHARE_IRQ
+ help
+ Selecting this option will add support for the integrated serial
+ port hardware found on MIPS RM9122 and similar processors.
+ If unsure, say N.
+
comment "Non-8250 serial port support"
config SERIAL_AMBA_PL010
@@ -499,6 +508,100 @@
your boot loader (lilo or loadlin) about how to pass options to the
kernel at boot time.)
+config SERIAL_BFIN
+ tristate "Blackfin serial port support"
+ depends on BFIN
+ select SERIAL_CORE
+ select SERIAL_BFIN_UART0 if (BF531 || BF532 || BF533 || BF561)
+ help
+ Add support for the built-in UARTs on the Blackfin.
+
+ To compile this driver as a module, choose M here: the
+ module will be called bfin_5xx.
+
+config SERIAL_BFIN_CONSOLE
+ bool "Console on Blackfin serial port"
+ depends on SERIAL_BFIN
+ select SERIAL_CORE_CONSOLE
+
+choice
+ prompt "UART Mode"
+ depends on SERIAL_BFIN
+ default SERIAL_BFIN_DMA
+ help
+ This driver supports the built-in serial ports of the Blackfin family
+ of CPUs
+
+config SERIAL_BFIN_DMA
+ bool "DMA mode"
+ depends on DMA_UNCACHED_1M
+ help
+ This driver works under DMA mode. If this option is selected, the
+ blackfin simple dma driver is also enabled.
+
+config SERIAL_BFIN_PIO
+ bool "PIO mode"
+ help
+ This driver works under PIO mode.
+
+endchoice
+
+config SERIAL_BFIN_UART0
+ bool "Enable UART0"
+ depends on SERIAL_BFIN
+ help
+ Enable UART0
+
+config BFIN_UART0_CTSRTS
+ bool "Enable UART0 hardware flow control"
+ depends on SERIAL_BFIN_UART0
+ help
+ Enable hardware flow control in the driver. Using GPIO emulate the CTS/RTS
+ signal.
+
+config UART0_CTS_PIN
+ int "UART0 CTS pin"
+ depends on BFIN_UART0_CTSRTS
+ default 23
+ help
+ The default pin is GPIO_GP7.
+ Refer to ./include/asm-blackfin/gpio.h to see the GPIO map.
+
+config UART0_RTS_PIN
+ int "UART0 RTS pin"
+ depends on BFIN_UART0_CTSRTS
+ default 22
+ help
+ The default pin is GPIO_GP6.
+ Refer to ./include/asm-blackfin/gpio.h to see the GPIO map.
+
+config SERIAL_BFIN_UART1
+ bool "Enable UART1"
+ depends on SERIAL_BFIN && (BF534 || BF536 || BF537)
+ help
+ Enable UART1
+
+config BFIN_UART1_CTSRTS
+ bool "Enable UART1 hardware flow control"
+ depends on SERIAL_BFIN_UART1
+ help
+ Enable hardware flow control in the driver. Using GPIO emulate the CTS/RTS
+ signal.
+
+config UART1_CTS_PIN
+ int "UART1 CTS pin"
+ depends on BFIN_UART1_CTSRTS
+ default -1
+ help
+ Refer to ./include/asm-blackfin/gpio.h to see the GPIO map.
+
+config UART1_RTS_PIN
+ int "UART1 RTS pin"
+ depends on BFIN_UART1_CTSRTS
+ default -1
+ help
+ Refer to ./include/asm-blackfin/gpio.h to see the GPIO map.
+
config SERIAL_IMX
bool "IMX serial port support"
depends on ARM && ARCH_IMX
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index 6b3560c..4959bcb 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -27,6 +27,7 @@
obj-$(CONFIG_SERIAL_PXA) += pxa.o
obj-$(CONFIG_SERIAL_PNX8XXX) += pnx8xxx_uart.o
obj-$(CONFIG_SERIAL_SA1100) += sa1100.o
+obj-$(CONFIG_SERIAL_BFIN) += bfin_5xx.o
obj-$(CONFIG_SERIAL_S3C2410) += s3c2410.o
obj-$(CONFIG_SERIAL_SUNCORE) += suncore.o
obj-$(CONFIG_SERIAL_SUNHV) += sunhv.o
diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c
new file mode 100644
index 0000000..408390f
--- /dev/null
+++ b/drivers/serial/bfin_5xx.c
@@ -0,0 +1,1012 @@
+/*
+ * File: drivers/serial/bfin_5xx.c
+ * Based on: Based on drivers/serial/sa1100.c
+ * Author: Aubrey Li <aubrey.li@analog.com>
+ *
+ * Created:
+ * Description: Driver for blackfin 5xx serial ports
+ *
+ * Rev: $Id: bfin_5xx.c,v 1.19 2006/09/24 02:33:53 aubrey Exp $
+ *
+ * Modified:
+ * Copyright 2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#if defined(CONFIG_SERIAL_BFIN_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/sysrq.h>
+#include <linux/platform_device.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/serial_core.h>
+
+#include <asm/gpio.h>
+#include <asm/mach/bfin_serial_5xx.h>
+
+#ifdef CONFIG_SERIAL_BFIN_DMA
+#include <linux/dma-mapping.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/cacheflush.h>
+#endif
+
+/* UART name and device definitions */
+#define BFIN_SERIAL_NAME "ttyBF"
+#define BFIN_SERIAL_MAJOR 204
+#define BFIN_SERIAL_MINOR 64
+
+/*
+ * Setup for console. Argument comes from the menuconfig
+ */
+#define DMA_RX_XCOUNT 512
+#define DMA_RX_YCOUNT (PAGE_SIZE / DMA_RX_XCOUNT)
+
+#define DMA_RX_FLUSH_JIFFIES 5
+
+#ifdef CONFIG_SERIAL_BFIN_DMA
+static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart);
+#else
+static void bfin_serial_do_work(struct work_struct *work);
+static void bfin_serial_tx_chars(struct bfin_serial_port *uart);
+static void local_put_char(struct bfin_serial_port *uart, char ch);
+#endif
+
+static void bfin_serial_mctrl_check(struct bfin_serial_port *uart);
+
+/*
+ * interrupts are disabled on entry
+ */
+static void bfin_serial_stop_tx(struct uart_port *port)
+{
+ struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
+
+#ifdef CONFIG_SERIAL_BFIN_DMA
+ disable_dma(uart->tx_dma_channel);
+#else
+ unsigned short ier;
+
+ ier = UART_GET_IER(uart);
+ ier &= ~ETBEI;
+ UART_PUT_IER(uart, ier);
+#endif
+}
+
+/*
+ * port is locked and interrupts are disabled
+ */
+static void bfin_serial_start_tx(struct uart_port *port)
+{
+ struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
+
+#ifdef CONFIG_SERIAL_BFIN_DMA
+ bfin_serial_dma_tx_chars(uart);
+#else
+ unsigned short ier;
+ ier = UART_GET_IER(uart);
+ ier |= ETBEI;
+ UART_PUT_IER(uart, ier);
+ bfin_serial_tx_chars(uart);
+#endif
+}
+
+/*
+ * Interrupts are enabled
+ */
+static void bfin_serial_stop_rx(struct uart_port *port)
+{
+ struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
+ unsigned short ier;
+
+ ier = UART_GET_IER(uart);
+ ier &= ~ERBFI;
+ UART_PUT_IER(uart, ier);
+}
+
+/*
+ * Set the modem control timer to fire immediately.
+ */
+static void bfin_serial_enable_ms(struct uart_port *port)
+{
+}
+
+#ifdef CONFIG_SERIAL_BFIN_PIO
+static void local_put_char(struct bfin_serial_port *uart, char ch)
+{
+ unsigned short status;
+ int flags = 0;
+
+ spin_lock_irqsave(&uart->port.lock, flags);
+
+ do {
+ status = UART_GET_LSR(uart);
+ } while (!(status & THRE));
+
+ UART_PUT_CHAR(uart, ch);
+ SSYNC();
+
+ spin_unlock_irqrestore(&uart->port.lock, flags);
+}
+
+static void bfin_serial_rx_chars(struct bfin_serial_port *uart)
+{
+ struct tty_struct *tty = uart->port.info?uart->port.info->tty:0;
+ unsigned int status, ch, flg;
+#ifdef BF533_FAMILY
+ static int in_break = 0;
+#endif
+
+ status = UART_GET_LSR(uart);
+ ch = UART_GET_CHAR(uart);
+ uart->port.icount.rx++;
+
+#ifdef BF533_FAMILY
+ /* The BF533 family of processors have a nice misbehavior where
+ * they continuously generate characters for a "single" break.
+ * We have to basically ignore this flood until the "next" valid
+ * character comes across. All other Blackfin families operate
+ * properly though.
+ */
+ if (in_break) {
+ if (ch != 0) {
+ in_break = 0;
+ ch = UART_GET_CHAR(uart);
+ }
+ return;
+ }
+#endif
+
+ if (status & BI) {
+#ifdef BF533_FAMILY
+ in_break = 1;
+#endif
+ uart->port.icount.brk++;
+ if (uart_handle_break(&uart->port))
+ goto ignore_char;
+ flg = TTY_BREAK;
+ } else if (status & PE) {
+ flg = TTY_PARITY;
+ uart->port.icount.parity++;
+ } else if (status & OE) {
+ flg = TTY_OVERRUN;
+ uart->port.icount.overrun++;
+ } else if (status & FE) {
+ flg = TTY_FRAME;
+ uart->port.icount.frame++;
+ } else
+ flg = TTY_NORMAL;
+
+ if (uart_handle_sysrq_char(&uart->port, ch))
+ goto ignore_char;
+ if (tty)
+ uart_insert_char(&uart->port, status, 2, ch, flg);
+
+ignore_char:
+ if (tty)
+ tty_flip_buffer_push(tty);
+}
+
+static void bfin_serial_tx_chars(struct bfin_serial_port *uart)
+{
+ struct circ_buf *xmit = &uart->port.info->xmit;
+
+ if (uart->port.x_char) {
+ UART_PUT_CHAR(uart, uart->port.x_char);
+ uart->port.icount.tx++;
+ uart->port.x_char = 0;
+ return;
+ }
+ /*
+ * Check the modem control lines before
+ * transmitting anything.
+ */
+ bfin_serial_mctrl_check(uart);
+
+ if (uart_circ_empty(xmit) || uart_tx_stopped(&uart->port)) {
+ bfin_serial_stop_tx(&uart->port);
+ return;
+ }
+
+ local_put_char(uart, xmit->buf[xmit->tail]);
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ uart->port.icount.tx++;
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(&uart->port);
+
+ if (uart_circ_empty(xmit))
+ bfin_serial_stop_tx(&uart->port);
+}
+
+static irqreturn_t bfin_serial_int(int irq, void *dev_id)
+{
+ struct bfin_serial_port *uart = dev_id;
+ unsigned short status;
+
+ spin_lock(&uart->port.lock);
+ status = UART_GET_IIR(uart);
+ do {
+ if ((status & IIR_STATUS) == IIR_TX_READY)
+ bfin_serial_tx_chars(uart);
+ if ((status & IIR_STATUS) == IIR_RX_READY)
+ bfin_serial_rx_chars(uart);
+ status = UART_GET_IIR(uart);
+ } while (status & (IIR_TX_READY | IIR_RX_READY));
+ spin_unlock(&uart->port.lock);
+ return IRQ_HANDLED;
+}
+
+static void bfin_serial_do_work(struct work_struct *work)
+{
+ struct bfin_serial_port *uart = container_of(work, struct bfin_serial_port, cts_workqueue);
+
+ bfin_serial_mctrl_check(uart);
+}
+
+#endif
+
+#ifdef CONFIG_SERIAL_BFIN_DMA
+static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart)
+{
+ struct circ_buf *xmit = &uart->port.info->xmit;
+ unsigned short ier;
+ int flags = 0;
+
+ if (!uart->tx_done)
+ return;
+
+ uart->tx_done = 0;
+
+ if (uart->port.x_char) {
+ UART_PUT_CHAR(uart, uart->port.x_char);
+ uart->port.icount.tx++;
+ uart->port.x_char = 0;
+ uart->tx_done = 1;
+ return;
+ }
+ /*
+ * Check the modem control lines before
+ * transmitting anything.
+ */
+ bfin_serial_mctrl_check(uart);
+
+ if (uart_circ_empty(xmit) || uart_tx_stopped(&uart->port)) {
+ bfin_serial_stop_tx(&uart->port);
+ uart->tx_done = 1;
+ return;
+ }
+
+ spin_lock_irqsave(&uart->port.lock, flags);
+ uart->tx_count = CIRC_CNT(xmit->head, xmit->tail, UART_XMIT_SIZE);
+ if (uart->tx_count > (UART_XMIT_SIZE - xmit->tail))
+ uart->tx_count = UART_XMIT_SIZE - xmit->tail;
+ blackfin_dcache_flush_range((unsigned long)(xmit->buf+xmit->tail),
+ (unsigned long)(xmit->buf+xmit->tail+uart->tx_count));
+ set_dma_config(uart->tx_dma_channel,
+ set_bfin_dma_config(DIR_READ, DMA_FLOW_STOP,
+ INTR_ON_BUF,
+ DIMENSION_LINEAR,
+ DATA_SIZE_8));
+ set_dma_start_addr(uart->tx_dma_channel, (unsigned long)(xmit->buf+xmit->tail));
+ set_dma_x_count(uart->tx_dma_channel, uart->tx_count);
+ set_dma_x_modify(uart->tx_dma_channel, 1);
+ enable_dma(uart->tx_dma_channel);
+ ier = UART_GET_IER(uart);
+ ier |= ETBEI;
+ UART_PUT_IER(uart, ier);
+ spin_unlock_irqrestore(&uart->port.lock, flags);
+}
+
+static void bfin_serial_dma_rx_chars(struct bfin_serial_port * uart)
+{
+ struct tty_struct *tty = uart->port.info->tty;
+ int i, flg, status;
+
+ status = UART_GET_LSR(uart);
+ uart->port.icount.rx += CIRC_CNT(uart->rx_dma_buf.head, uart->rx_dma_buf.tail, UART_XMIT_SIZE);;
+
+ if (status & BI) {
+ uart->port.icount.brk++;
+ if (uart_handle_break(&uart->port))
+ goto dma_ignore_char;
+ flg = TTY_BREAK;
+ } else if (status & PE) {
+ flg = TTY_PARITY;
+ uart->port.icount.parity++;
+ } else if (status & OE) {
+ flg = TTY_OVERRUN;
+ uart->port.icount.overrun++;
+ } else if (status & FE) {
+ flg = TTY_FRAME;
+ uart->port.icount.frame++;
+ } else
+ flg = TTY_NORMAL;
+
+ for (i = uart->rx_dma_buf.head; i < uart->rx_dma_buf.tail; i++) {
+ if (uart_handle_sysrq_char(&uart->port, uart->rx_dma_buf.buf[i]))
+ goto dma_ignore_char;
+ uart_insert_char(&uart->port, status, 2, uart->rx_dma_buf.buf[i], flg);
+ }
+dma_ignore_char:
+ tty_flip_buffer_push(tty);
+}
+
+void bfin_serial_rx_dma_timeout(struct bfin_serial_port *uart)
+{
+ int x_pos, pos;
+ int flags = 0;
+
+ bfin_serial_dma_tx_chars(uart);
+
+ spin_lock_irqsave(&uart->port.lock, flags);
+ x_pos = DMA_RX_XCOUNT - get_dma_curr_xcount(uart->rx_dma_channel);
+ if (x_pos == DMA_RX_XCOUNT)
+ x_pos = 0;
+
+ pos = uart->rx_dma_nrows * DMA_RX_XCOUNT + x_pos;
+
+ if (pos>uart->rx_dma_buf.tail) {
+ uart->rx_dma_buf.tail = pos;
+ bfin_serial_dma_rx_chars(uart);
+ uart->rx_dma_buf.head = uart->rx_dma_buf.tail;
+ }
+ spin_unlock_irqrestore(&uart->port.lock, flags);
+ uart->rx_dma_timer.expires = jiffies + DMA_RX_FLUSH_JIFFIES;
+ add_timer(&(uart->rx_dma_timer));
+}
+
+static irqreturn_t bfin_serial_dma_tx_int(int irq, void *dev_id)
+{
+ struct bfin_serial_port *uart = dev_id;
+ struct circ_buf *xmit = &uart->port.info->xmit;
+ unsigned short ier;
+
+ spin_lock(&uart->port.lock);
+ if (!(get_dma_curr_irqstat(uart->tx_dma_channel)&DMA_RUN)) {
+ clear_dma_irqstat(uart->tx_dma_channel);
+ disable_dma(uart->tx_dma_channel);
+ ier = UART_GET_IER(uart);
+ ier &= ~ETBEI;
+ UART_PUT_IER(uart, ier);
+ xmit->tail = (xmit->tail+uart->tx_count) &(UART_XMIT_SIZE -1);
+ uart->port.icount.tx+=uart->tx_count;
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(&uart->port);
+
+ if (uart_circ_empty(xmit))
+ bfin_serial_stop_tx(&uart->port);
+ uart->tx_done = 1;
+ }
+
+ spin_unlock(&uart->port.lock);
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t bfin_serial_dma_rx_int(int irq, void *dev_id)
+{
+ struct bfin_serial_port *uart = dev_id;
+ unsigned short irqstat;
+
+ uart->rx_dma_nrows++;
+ if (uart->rx_dma_nrows == DMA_RX_YCOUNT) {
+ uart->rx_dma_nrows = 0;
+ uart->rx_dma_buf.tail = DMA_RX_XCOUNT*DMA_RX_YCOUNT;
+ bfin_serial_dma_rx_chars(uart);
+ uart->rx_dma_buf.head = uart->rx_dma_buf.tail = 0;
+ }
+ spin_lock(&uart->port.lock);
+ irqstat = get_dma_curr_irqstat(uart->rx_dma_channel);
+ clear_dma_irqstat(uart->rx_dma_channel);
+
+ spin_unlock(&uart->port.lock);
+ return IRQ_HANDLED;
+}
+#endif
+
+/*
+ * Return TIOCSER_TEMT when transmitter is not busy.
+ */
+static unsigned int bfin_serial_tx_empty(struct uart_port *port)
+{
+ struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
+ unsigned short lsr;
+
+ lsr = UART_GET_LSR(uart);
+ if (lsr & TEMT)
+ return TIOCSER_TEMT;
+ else
+ return 0;
+}
+
+static unsigned int bfin_serial_get_mctrl(struct uart_port *port)
+{
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
+ struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
+ if (uart->cts_pin < 0)
+ return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
+
+ if (gpio_get_value(uart->cts_pin))
+ return TIOCM_DSR | TIOCM_CAR;
+ else
+#endif
+ return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
+}
+
+static void bfin_serial_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
+ struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
+ if (uart->rts_pin < 0)
+ return;
+
+ if (mctrl & TIOCM_RTS)
+ gpio_set_value(uart->rts_pin, 0);
+ else
+ gpio_set_value(uart->rts_pin, 1);
+#endif
+}
+
+/*
+ * Handle any change of modem status signal since we were last called.
+ */
+static void bfin_serial_mctrl_check(struct bfin_serial_port *uart)
+{
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
+ unsigned int status;
+# ifdef CONFIG_SERIAL_BFIN_DMA
+ struct uart_info *info = uart->port.info;
+ struct tty_struct *tty = info->tty;
+
+ status = bfin_serial_get_mctrl(&uart->port);
+ if (!(status & TIOCM_CTS)) {
+ tty->hw_stopped = 1;
+ } else {
+ tty->hw_stopped = 0;
+ }
+# else
+ status = bfin_serial_get_mctrl(&uart->port);
+ uart_handle_cts_change(&uart->port, status & TIOCM_CTS);
+ if (!(status & TIOCM_CTS))
+ schedule_work(&uart->cts_workqueue);
+# endif
+#endif
+}
+
+/*
+ * Interrupts are always disabled.
+ */
+static void bfin_serial_break_ctl(struct uart_port *port, int break_state)
+{
+}
+
+static int bfin_serial_startup(struct uart_port *port)
+{
+ struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
+
+#ifdef CONFIG_SERIAL_BFIN_DMA
+ dma_addr_t dma_handle;
+
+ if (request_dma(uart->rx_dma_channel, "BFIN_UART_RX") < 0) {
+ printk(KERN_NOTICE "Unable to attach Blackfin UART RX DMA channel\n");
+ return -EBUSY;
+ }
+
+ if (request_dma(uart->tx_dma_channel, "BFIN_UART_TX") < 0) {
+ printk(KERN_NOTICE "Unable to attach Blackfin UART TX DMA channel\n");
+ free_dma(uart->rx_dma_channel);
+ return -EBUSY;
+ }
+
+ set_dma_callback(uart->rx_dma_channel, bfin_serial_dma_rx_int, uart);
+ set_dma_callback(uart->tx_dma_channel, bfin_serial_dma_tx_int, uart);
+
+ uart->rx_dma_buf.buf = (unsigned char *)dma_alloc_coherent(NULL, PAGE_SIZE, &dma_handle, GFP_DMA);
+ uart->rx_dma_buf.head = 0;
+ uart->rx_dma_buf.tail = 0;
+ uart->rx_dma_nrows = 0;
+
+ set_dma_config(uart->rx_dma_channel,
+ set_bfin_dma_config(DIR_WRITE, DMA_FLOW_AUTO,
+ INTR_ON_ROW, DIMENSION_2D,
+ DATA_SIZE_8));
+ set_dma_x_count(uart->rx_dma_channel, DMA_RX_XCOUNT);
+ set_dma_x_modify(uart->rx_dma_channel, 1);
+ set_dma_y_count(uart->rx_dma_channel, DMA_RX_YCOUNT);
+ set_dma_y_modify(uart->rx_dma_channel, 1);
+ set_dma_start_addr(uart->rx_dma_channel, (unsigned long)uart->rx_dma_buf.buf);
+ enable_dma(uart->rx_dma_channel);
+
+ uart->rx_dma_timer.data = (unsigned long)(uart);
+ uart->rx_dma_timer.function = (void *)bfin_serial_rx_dma_timeout;
+ uart->rx_dma_timer.expires = jiffies + DMA_RX_FLUSH_JIFFIES;
+ add_timer(&(uart->rx_dma_timer));
+#else
+ if (request_irq
+ (uart->port.irq, bfin_serial_int, IRQF_DISABLED,
+ "BFIN_UART_RX", uart)) {
+ printk(KERN_NOTICE "Unable to attach BlackFin UART RX interrupt\n");
+ return -EBUSY;
+ }
+
+ if (request_irq
+ (uart->port.irq+1, bfin_serial_int, IRQF_DISABLED,
+ "BFIN_UART_TX", uart)) {
+ printk(KERN_NOTICE "Unable to attach BlackFin UART TX interrupt\n");
+ free_irq(uart->port.irq, uart);
+ return -EBUSY;
+ }
+#endif
+ UART_PUT_IER(uart, UART_GET_IER(uart) | ERBFI);
+ return 0;
+}
+
+static void bfin_serial_shutdown(struct uart_port *port)
+{
+ struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
+
+#ifdef CONFIG_SERIAL_BFIN_DMA
+ disable_dma(uart->tx_dma_channel);
+ free_dma(uart->tx_dma_channel);
+ disable_dma(uart->rx_dma_channel);
+ free_dma(uart->rx_dma_channel);
+ del_timer(&(uart->rx_dma_timer));
+#else
+ free_irq(uart->port.irq, uart);
+ free_irq(uart->port.irq+1, uart);
+#endif
+}
+
+static void
+bfin_serial_set_termios(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old)
+{
+ struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
+ unsigned long flags;
+ unsigned int baud, quot;
+ unsigned short val, ier, lsr, lcr = 0;
+
+ switch (termios->c_cflag & CSIZE) {
+ case CS8:
+ lcr = WLS(8);
+ break;
+ case CS7:
+ lcr = WLS(7);
+ break;
+ case CS6:
+ lcr = WLS(6);
+ break;
+ case CS5:
+ lcr = WLS(5);
+ break;
+ default:
+ printk(KERN_ERR "%s: word lengh not supported\n",
+ __FUNCTION__);
+ }
+
+ if (termios->c_cflag & CSTOPB)
+ lcr |= STB;
+ if (termios->c_cflag & PARENB) {
+ lcr |= PEN;
+ if (!(termios->c_cflag & PARODD))
+ lcr |= EPS;
+ }
+
+ /* These controls are not implemented for this port */
+ termios->c_iflag |= INPCK | BRKINT | PARMRK;
+ termios->c_iflag &= ~(IGNPAR | IGNBRK);
+
+ /* These controls are not implemented for this port */
+ termios->c_iflag |= INPCK | BRKINT | PARMRK;
+ termios->c_iflag &= ~(IGNPAR | IGNBRK);
+
+ baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
+ quot = uart_get_divisor(port, baud);
+ spin_lock_irqsave(&uart->port.lock, flags);
+
+ do {
+ lsr = UART_GET_LSR(uart);
+ } while (!(lsr & TEMT));
+
+ /* Disable UART */
+ ier = UART_GET_IER(uart);
+ UART_PUT_IER(uart, 0);
+
+ /* Set DLAB in LCR to Access DLL and DLH */
+ val = UART_GET_LCR(uart);
+ val |= DLAB;
+ UART_PUT_LCR(uart, val);
+ SSYNC();
+
+ UART_PUT_DLL(uart, quot & 0xFF);
+ SSYNC();
+ UART_PUT_DLH(uart, (quot >> 8) & 0xFF);
+ SSYNC();
+
+ /* Clear DLAB in LCR to Access THR RBR IER */
+ val = UART_GET_LCR(uart);
+ val &= ~DLAB;
+ UART_PUT_LCR(uart, val);
+ SSYNC();
+
+ UART_PUT_LCR(uart, lcr);
+
+ /* Enable UART */
+ UART_PUT_IER(uart, ier);
+
+ val = UART_GET_GCTL(uart);
+ val |= UCEN;
+ UART_PUT_GCTL(uart, val);
+
+ spin_unlock_irqrestore(&uart->port.lock, flags);
+}
+
+static const char *bfin_serial_type(struct uart_port *port)
+{
+ struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
+
+ return uart->port.type == PORT_BFIN ? "BFIN-UART" : NULL;
+}
+
+/*
+ * Release the memory region(s) being used by 'port'.
+ */
+static void bfin_serial_release_port(struct uart_port *port)
+{
+}
+
+/*
+ * Request the memory region(s) being used by 'port'.
+ */
+static int bfin_serial_request_port(struct uart_port *port)
+{
+ return 0;
+}
+
+/*
+ * Configure/autoconfigure the port.
+ */
+static void bfin_serial_config_port(struct uart_port *port, int flags)
+{
+ struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
+
+ if (flags & UART_CONFIG_TYPE &&
+ bfin_serial_request_port(&uart->port) == 0)
+ uart->port.type = PORT_BFIN;
+}
+
+/*
+ * Verify the new serial_struct (for TIOCSSERIAL).
+ * The only change we allow are to the flags and type, and
+ * even then only between PORT_BFIN and PORT_UNKNOWN
+ */
+static int
+bfin_serial_verify_port(struct uart_port *port, struct serial_struct *ser)
+{
+ return 0;
+}
+
+static struct uart_ops bfin_serial_pops = {
+ .tx_empty = bfin_serial_tx_empty,
+ .set_mctrl = bfin_serial_set_mctrl,
+ .get_mctrl = bfin_serial_get_mctrl,
+ .stop_tx = bfin_serial_stop_tx,
+ .start_tx = bfin_serial_start_tx,
+ .stop_rx = bfin_serial_stop_rx,
+ .enable_ms = bfin_serial_enable_ms,
+ .break_ctl = bfin_serial_break_ctl,
+ .startup = bfin_serial_startup,
+ .shutdown = bfin_serial_shutdown,
+ .set_termios = bfin_serial_set_termios,
+ .type = bfin_serial_type,
+ .release_port = bfin_serial_release_port,
+ .request_port = bfin_serial_request_port,
+ .config_port = bfin_serial_config_port,
+ .verify_port = bfin_serial_verify_port,
+};
+
+static void __init bfin_serial_init_ports(void)
+{
+ static int first = 1;
+ int i;
+
+ if (!first)
+ return;
+ first = 0;
+
+ for (i = 0; i < nr_ports; i++) {
+ bfin_serial_ports[i].port.uartclk = get_sclk();
+ bfin_serial_ports[i].port.ops = &bfin_serial_pops;
+ bfin_serial_ports[i].port.line = i;
+ bfin_serial_ports[i].port.iotype = UPIO_MEM;
+ bfin_serial_ports[i].port.membase =
+ (void __iomem *)bfin_serial_resource[i].uart_base_addr;
+ bfin_serial_ports[i].port.mapbase =
+ bfin_serial_resource[i].uart_base_addr;
+ bfin_serial_ports[i].port.irq =
+ bfin_serial_resource[i].uart_irq;
+ bfin_serial_ports[i].port.flags = UPF_BOOT_AUTOCONF;
+#ifdef CONFIG_SERIAL_BFIN_DMA
+ bfin_serial_ports[i].tx_done = 1;
+ bfin_serial_ports[i].tx_count = 0;
+ bfin_serial_ports[i].tx_dma_channel =
+ bfin_serial_resource[i].uart_tx_dma_channel;
+ bfin_serial_ports[i].rx_dma_channel =
+ bfin_serial_resource[i].uart_rx_dma_channel;
+ init_timer(&(bfin_serial_ports[i].rx_dma_timer));
+#else
+ INIT_WORK(&bfin_serial_ports[i].cts_workqueue, bfin_serial_do_work);
+#endif
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
+ bfin_serial_ports[i].cts_pin =
+ bfin_serial_resource[i].uart_cts_pin;
+ bfin_serial_ports[i].rts_pin =
+ bfin_serial_resource[i].uart_rts_pin;
+#endif
+ bfin_serial_hw_init(&bfin_serial_ports[i]);
+
+ }
+}
+
+#ifdef CONFIG_SERIAL_BFIN_CONSOLE
+static void bfin_serial_console_putchar(struct uart_port *port, int ch)
+{
+ struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
+ while (!(UART_GET_LSR(uart)))
+ barrier();
+ UART_PUT_CHAR(uart, ch);
+ SSYNC();
+}
+
+/*
+ * Interrupts are disabled on entering
+ */
+static void
+bfin_serial_console_write(struct console *co, const char *s, unsigned int count)
+{
+ struct bfin_serial_port *uart = &bfin_serial_ports[co->index];
+ int flags = 0;
+
+ spin_lock_irqsave(&uart->port.lock, flags);
+ uart_console_write(&uart->port, s, count, bfin_serial_console_putchar);
+ spin_unlock_irqrestore(&uart->port.lock, flags);
+
+}
+
+/*
+ * If the port was already initialised (eg, by a boot loader),
+ * try to determine the current setup.
+ */
+static void __init
+bfin_serial_console_get_options(struct bfin_serial_port *uart, int *baud,
+ int *parity, int *bits)
+{
+ unsigned short status;
+
+ status = UART_GET_IER(uart) & (ERBFI | ETBEI);
+ if (status == (ERBFI | ETBEI)) {
+ /* ok, the port was enabled */
+ unsigned short lcr, val;
+ unsigned short dlh, dll;
+
+ lcr = UART_GET_LCR(uart);
+
+ *parity = 'n';
+ if (lcr & PEN) {
+ if (lcr & EPS)
+ *parity = 'e';
+ else
+ *parity = 'o';
+ }
+ switch (lcr & 0x03) {
+ case 0: *bits = 5; break;
+ case 1: *bits = 6; break;
+ case 2: *bits = 7; break;
+ case 3: *bits = 8; break;
+ }
+ /* Set DLAB in LCR to Access DLL and DLH */
+ val = UART_GET_LCR(uart);
+ val |= DLAB;
+ UART_PUT_LCR(uart, val);
+
+ dll = UART_GET_DLL(uart);
+ dlh = UART_GET_DLH(uart);
+
+ /* Clear DLAB in LCR to Access THR RBR IER */
+ val = UART_GET_LCR(uart);
+ val &= ~DLAB;
+ UART_PUT_LCR(uart, val);
+
+ *baud = get_sclk() / (16*(dll | dlh << 8));
+ }
+ pr_debug("%s:baud = %d, parity = %c, bits= %d\n", __FUNCTION__, *baud, *parity, *bits);
+}
+
+static int __init
+bfin_serial_console_setup(struct console *co, char *options)
+{
+ struct bfin_serial_port *uart;
+ int baud = 57600;
+ int bits = 8;
+ int parity = 'n';
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
+ int flow = 'r';
+#else
+ int flow = 'n';
+#endif
+
+ /*
+ * Check whether an invalid uart number has been specified, and
+ * if so, search for the first available port that does have
+ * console support.
+ */
+ if (co->index == -1 || co->index >= nr_ports)
+ co->index = 0;
+ uart = &bfin_serial_ports[co->index];
+
+ if (options)
+ uart_parse_options(options, &baud, &parity, &bits, &flow);
+ else
+ bfin_serial_console_get_options(uart, &baud, &parity, &bits);
+
+ return uart_set_options(&uart->port, co, baud, parity, bits, flow);
+}
+
+static struct uart_driver bfin_serial_reg;
+static struct console bfin_serial_console = {
+ .name = BFIN_SERIAL_NAME,
+ .write = bfin_serial_console_write,
+ .device = uart_console_device,
+ .setup = bfin_serial_console_setup,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+ .data = &bfin_serial_reg,
+};
+
+static int __init bfin_serial_rs_console_init(void)
+{
+ bfin_serial_init_ports();
+ register_console(&bfin_serial_console);
+ return 0;
+}
+console_initcall(bfin_serial_rs_console_init);
+
+#define BFIN_SERIAL_CONSOLE &bfin_serial_console
+#else
+#define BFIN_SERIAL_CONSOLE NULL
+#endif
+
+static struct uart_driver bfin_serial_reg = {
+ .owner = THIS_MODULE,
+ .driver_name = "bfin-uart",
+ .dev_name = BFIN_SERIAL_NAME,
+ .major = BFIN_SERIAL_MAJOR,
+ .minor = BFIN_SERIAL_MINOR,
+ .nr = NR_PORTS,
+ .cons = BFIN_SERIAL_CONSOLE,
+};
+
+static int bfin_serial_suspend(struct platform_device *dev, pm_message_t state)
+{
+ struct bfin_serial_port *uart = platform_get_drvdata(dev);
+
+ if (uart)
+ uart_suspend_port(&bfin_serial_reg, &uart->port);
+
+ return 0;
+}
+
+static int bfin_serial_resume(struct platform_device *dev)
+{
+ struct bfin_serial_port *uart = platform_get_drvdata(dev);
+
+ if (uart)
+ uart_resume_port(&bfin_serial_reg, &uart->port);
+
+ return 0;
+}
+
+static int bfin_serial_probe(struct platform_device *dev)
+{
+ struct resource *res = dev->resource;
+ int i;
+
+ for (i = 0; i < dev->num_resources; i++, res++)
+ if (res->flags & IORESOURCE_MEM)
+ break;
+
+ if (i < dev->num_resources) {
+ for (i = 0; i < nr_ports; i++, res++) {
+ if (bfin_serial_ports[i].port.mapbase != res->start)
+ continue;
+ bfin_serial_ports[i].port.dev = &dev->dev;
+ uart_add_one_port(&bfin_serial_reg, &bfin_serial_ports[i].port);
+ platform_set_drvdata(dev, &bfin_serial_ports[i]);
+ }
+ }
+
+ return 0;
+}
+
+static int bfin_serial_remove(struct platform_device *pdev)
+{
+ struct bfin_serial_port *uart = platform_get_drvdata(pdev);
+
+
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
+ gpio_free(uart->cts_pin);
+ gpio_free(uart->rts_pin);
+#endif
+
+ platform_set_drvdata(pdev, NULL);
+
+ if (uart)
+ uart_remove_one_port(&bfin_serial_reg, &uart->port);
+
+ return 0;
+}
+
+static struct platform_driver bfin_serial_driver = {
+ .probe = bfin_serial_probe,
+ .remove = bfin_serial_remove,
+ .suspend = bfin_serial_suspend,
+ .resume = bfin_serial_resume,
+ .driver = {
+ .name = "bfin-uart",
+ },
+};
+
+static int __init bfin_serial_init(void)
+{
+ int ret;
+
+ pr_info("Serial: Blackfin serial driver\n");
+
+ bfin_serial_init_ports();
+
+ ret = uart_register_driver(&bfin_serial_reg);
+ if (ret == 0) {
+ ret = platform_driver_register(&bfin_serial_driver);
+ if (ret) {
+ pr_debug("uart register failed\n");
+ uart_unregister_driver(&bfin_serial_reg);
+ }
+ }
+ return ret;
+}
+
+static void __exit bfin_serial_exit(void)
+{
+ platform_driver_unregister(&bfin_serial_driver);
+ uart_unregister_driver(&bfin_serial_reg);
+}
+
+module_init(bfin_serial_init);
+module_exit(bfin_serial_exit);
+
+MODULE_AUTHOR("Aubrey.Li <aubrey.li@analog.com>");
+MODULE_DESCRIPTION("Blackfin generic serial port driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_CHARDEV_MAJOR(BFIN_SERIAL_MAJOR);
diff --git a/drivers/serial/crisv10.h b/drivers/serial/crisv10.h
deleted file mode 100644
index 4a23340..0000000
--- a/drivers/serial/crisv10.h
+++ /dev/null
@@ -1,136 +0,0 @@
-/*
- * serial.h: Arch-dep definitions for the Etrax100 serial driver.
- *
- * Copyright (C) 1998, 1999, 2000 Axis Communications AB
- */
-
-#ifndef _ETRAX_SERIAL_H
-#define _ETRAX_SERIAL_H
-
-#include <linux/circ_buf.h>
-#include <asm/termios.h>
-
-/* Software state per channel */
-
-#ifdef __KERNEL__
-/*
- * This is our internal structure for each serial port's state.
- *
- * Many fields are paralleled by the structure used by the serial_struct
- * structure.
- *
- * For definitions of the flags field, see tty.h
- */
-
-#define SERIAL_RECV_DESCRIPTORS 8
-
-struct etrax_recv_buffer {
- struct etrax_recv_buffer *next;
- unsigned short length;
- unsigned char error;
- unsigned char pad;
-
- unsigned char buffer[0];
-};
-
-struct e100_serial {
- int baud;
- volatile u8 *port; /* R_SERIALx_CTRL */
- u32 irq; /* bitnr in R_IRQ_MASK2 for dmaX_descr */
-
- /* Output registers */
- volatile u8 *oclrintradr; /* adr to R_DMA_CHx_CLR_INTR */
- volatile u32 *ofirstadr; /* adr to R_DMA_CHx_FIRST */
- volatile u8 *ocmdadr; /* adr to R_DMA_CHx_CMD */
- const volatile u8 *ostatusadr; /* adr to R_DMA_CHx_STATUS */
-
- /* Input registers */
- volatile u8 *iclrintradr; /* adr to R_DMA_CHx_CLR_INTR */
- volatile u32 *ifirstadr; /* adr to R_DMA_CHx_FIRST */
- volatile u8 *icmdadr; /* adr to R_DMA_CHx_CMD */
- volatile u32 *idescradr; /* adr to R_DMA_CHx_DESCR */
-
- int flags; /* defined in tty.h */
-
- u8 rx_ctrl; /* shadow for R_SERIALx_REC_CTRL */
- u8 tx_ctrl; /* shadow for R_SERIALx_TR_CTRL */
- u8 iseteop; /* bit number for R_SET_EOP for the input dma */
- int enabled; /* Set to 1 if the port is enabled in HW config */
-
- u8 dma_out_enabled:1; /* Set to 1 if DMA should be used */
- u8 dma_in_enabled:1; /* Set to 1 if DMA should be used */
-
- /* end of fields defined in rs_table[] in .c-file */
- u8 uses_dma_in; /* Set to 1 if DMA is used */
- u8 uses_dma_out; /* Set to 1 if DMA is used */
- u8 forced_eop; /* a fifo eop has been forced */
- int baud_base; /* For special baudrates */
- int custom_divisor; /* For special baudrates */
- struct etrax_dma_descr tr_descr;
- struct etrax_dma_descr rec_descr[SERIAL_RECV_DESCRIPTORS];
- int cur_rec_descr;
-
- volatile int tr_running; /* 1 if output is running */
-
- struct tty_struct *tty;
- int read_status_mask;
- int ignore_status_mask;
- int x_char; /* xon/xoff character */
- int close_delay;
- unsigned short closing_wait;
- unsigned short closing_wait2;
- unsigned long event;
- unsigned long last_active;
- int line;
- int type; /* PORT_ETRAX */
- int count; /* # of fd on device */
- int blocked_open; /* # of blocked opens */
- struct circ_buf xmit;
- struct etrax_recv_buffer *first_recv_buffer;
- struct etrax_recv_buffer *last_recv_buffer;
- unsigned int recv_cnt;
- unsigned int max_recv_cnt;
-
- struct work_struct work;
- struct async_icount icount; /* error-statistics etc.*/
- struct ktermios normal_termios;
- struct ktermios callout_termios;
-#ifdef DECLARE_WAITQUEUE
- wait_queue_head_t open_wait;
- wait_queue_head_t close_wait;
-#else
- struct wait_queue *open_wait;
- struct wait_queue *close_wait;
-#endif
-
- unsigned long char_time_usec; /* The time for 1 char, in usecs */
- unsigned long flush_time_usec; /* How often we should flush */
- unsigned long last_tx_active_usec; /* Last tx usec in the jiffies */
- unsigned long last_tx_active; /* Last tx time in jiffies */
- unsigned long last_rx_active_usec; /* Last rx usec in the jiffies */
- unsigned long last_rx_active; /* Last rx time in jiffies */
-
- int break_detected_cnt;
- int errorcode;
-
-#ifdef CONFIG_ETRAX_RS485
- struct rs485_control rs485; /* RS-485 support */
-#endif
-};
-
-/* this PORT is not in the standard serial.h. it's not actually used for
- * anything since we only have one type of async serial-port anyway in this
- * system.
- */
-
-#define PORT_ETRAX 1
-
-/*
- * Events are used to schedule things to happen at timer-interrupt
- * time, instead of at rs interrupt time.
- */
-#define RS_EVENT_WRITE_WAKEUP 0
-
-#endif /* __KERNEL__ */
-
-#endif /* !_ETRAX_SERIAL_H */
diff --git a/drivers/serial/mpsc.c b/drivers/serial/mpsc.c
index 3d2fcc5..d09f209 100644
--- a/drivers/serial/mpsc.c
+++ b/drivers/serial/mpsc.c
@@ -183,6 +183,7 @@
u8 *txb_p; /* Phys addr of txb */
int txr_head; /* Where new data goes */
int txr_tail; /* Where sent data comes off */
+ spinlock_t tx_lock; /* transmit lock */
/* Mirrored values of regs we can't read (if 'mirror_regs' set) */
u32 MPSC_MPCR_m;
@@ -1212,6 +1213,9 @@
{
struct mpsc_tx_desc *txre;
int rc = 0;
+ unsigned long iflags;
+
+ spin_lock_irqsave(&pi->tx_lock, iflags);
if (!mpsc_sdma_tx_active(pi)) {
txre = (struct mpsc_tx_desc *)(pi->txr +
@@ -1248,6 +1252,7 @@
mpsc_sdma_start_tx(pi); /* start next desc if ready */
}
+ spin_unlock_irqrestore(&pi->tx_lock, iflags);
return rc;
}
@@ -1338,11 +1343,16 @@
mpsc_start_tx(struct uart_port *port)
{
struct mpsc_port_info *pi = (struct mpsc_port_info *)port;
+ unsigned long iflags;
+
+ spin_lock_irqsave(&pi->tx_lock, iflags);
mpsc_unfreeze(pi);
mpsc_copy_tx_data(pi);
mpsc_sdma_start_tx(pi);
+ spin_unlock_irqrestore(&pi->tx_lock, iflags);
+
pr_debug("mpsc_start_tx[%d]\n", port->line);
return;
}
@@ -1625,6 +1635,16 @@
struct mpsc_port_info *pi = &mpsc_ports[co->index];
u8 *bp, *dp, add_cr = 0;
int i;
+ unsigned long iflags;
+
+ spin_lock_irqsave(&pi->tx_lock, iflags);
+
+ while (pi->txr_head != pi->txr_tail) {
+ while (mpsc_sdma_tx_active(pi))
+ udelay(100);
+ mpsc_sdma_intr_ack(pi);
+ mpsc_tx_intr(pi);
+ }
while (mpsc_sdma_tx_active(pi))
udelay(100);
@@ -1668,6 +1688,7 @@
pi->txr_tail = (pi->txr_tail + 1) & (MPSC_TXR_ENTRIES - 1);
}
+ spin_unlock_irqrestore(&pi->tx_lock, iflags);
return;
}
@@ -2005,7 +2026,8 @@
if (!(rc = mpsc_drv_map_regs(pi, dev))) {
mpsc_drv_get_platform_data(pi, dev, dev->id);
- if (!(rc = mpsc_make_ready(pi)))
+ if (!(rc = mpsc_make_ready(pi))) {
+ spin_lock_init(&pi->tx_lock);
if (!(rc = uart_add_one_port(&mpsc_reg,
&pi->port)))
rc = 0;
@@ -2014,6 +2036,7 @@
(struct uart_port *)pi);
mpsc_drv_unmap_regs(pi);
}
+ }
else
mpsc_drv_unmap_regs(pi);
}
diff --git a/drivers/serial/of_serial.c b/drivers/serial/of_serial.c
index 09b0b73..336d0f4 100644
--- a/drivers/serial/of_serial.c
+++ b/drivers/serial/of_serial.c
@@ -48,7 +48,8 @@
port->iotype = UPIO_MEM;
port->type = type;
port->uartclk = *clk;
- port->flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF | UPF_IOREMAP;
+ port->flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF | UPF_IOREMAP
+ | UPF_FIXED_PORT;
port->dev = &ofdev->dev;
port->custom_divisor = *clk / (16 * (*spd));
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index 0422c0f..326020f 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -37,13 +37,6 @@
#include <asm/irq.h>
#include <asm/uaccess.h>
-#undef DEBUG
-#ifdef DEBUG
-#define DPRINTK(x...) printk(x)
-#else
-#define DPRINTK(x...) do { } while (0)
-#endif
-
/*
* This is used to lock changes in serial line configuration.
*/
@@ -552,7 +545,7 @@
return;
}
- DPRINTK("uart_flush_buffer(%d) called\n", tty->index);
+ pr_debug("uart_flush_buffer(%d) called\n", tty->index);
spin_lock_irqsave(&port->lock, flags);
uart_circ_clear(&state->info->xmit);
@@ -672,19 +665,21 @@
*/
mutex_lock(&state->mutex);
- change_irq = new_serial.irq != port->irq;
+ change_irq = !(port->flags & UPF_FIXED_PORT)
+ && new_serial.irq != port->irq;
/*
* Since changing the 'type' of the port changes its resource
* allocations, we should treat type changes the same as
* IO port changes.
*/
- change_port = new_port != port->iobase ||
- (unsigned long)new_serial.iomem_base != port->mapbase ||
- new_serial.hub6 != port->hub6 ||
- new_serial.io_type != port->iotype ||
- new_serial.iomem_reg_shift != port->regshift ||
- new_serial.type != port->type;
+ change_port = !(port->flags & UPF_FIXED_PORT)
+ && (new_port != port->iobase ||
+ (unsigned long)new_serial.iomem_base != port->mapbase ||
+ new_serial.hub6 != port->hub6 ||
+ new_serial.io_type != port->iotype ||
+ new_serial.iomem_reg_shift != port->regshift ||
+ new_serial.type != port->type);
old_flags = port->flags;
new_flags = new_serial.flags;
@@ -796,8 +791,10 @@
}
}
- port->irq = new_serial.irq;
- port->uartclk = new_serial.baud_base * 16;
+ if (change_irq)
+ port->irq = new_serial.irq;
+ if (!(port->flags & UPF_FIXED_PORT))
+ port->uartclk = new_serial.baud_base * 16;
port->flags = (port->flags & ~UPF_CHANGE_MASK) |
(new_flags & UPF_CHANGE_MASK);
port->custom_divisor = new_serial.custom_divisor;
@@ -1220,7 +1217,7 @@
port = state->port;
- DPRINTK("uart_close(%d) called\n", port->line);
+ pr_debug("uart_close(%d) called\n", port->line);
mutex_lock(&state->mutex);
@@ -1339,7 +1336,7 @@
expire = jiffies + timeout;
- DPRINTK("uart_wait_until_sent(%d), jiffies=%lu, expire=%lu...\n",
+ pr_debug("uart_wait_until_sent(%d), jiffies=%lu, expire=%lu...\n",
port->line, jiffies, expire);
/*
@@ -1368,7 +1365,7 @@
struct uart_state *state = tty->driver_data;
BUG_ON(!kernel_locked());
- DPRINTK("uart_hangup(%d)\n", state->port->line);
+ pr_debug("uart_hangup(%d)\n", state->port->line);
mutex_lock(&state->mutex);
if (state->info && state->info->flags & UIF_NORMAL_ACTIVE) {
@@ -1566,7 +1563,7 @@
int retval, line = tty->index;
BUG_ON(!kernel_locked());
- DPRINTK("uart_open(%d) called\n", line);
+ pr_debug("uart_open(%d) called\n", line);
/*
* tty->driver->num won't change, so we won't fail here with
@@ -2064,6 +2061,7 @@
case UPIO_MEM32:
case UPIO_AU:
case UPIO_TSI:
+ case UPIO_DWAPB:
snprintf(address, sizeof(address),
"MMIO 0x%lx", port->mapbase);
break;
@@ -2409,6 +2407,7 @@
case UPIO_MEM32:
case UPIO_AU:
case UPIO_TSI:
+ case UPIO_DWAPB:
return (port1->mapbase == port2->mapbase);
}
return 0;
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 7e54e48e..4a012d9a 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -58,6 +58,12 @@
This selects a driver for the Atmel SPI Controller, present on
many AT32 (AVR32) and AT91 (ARM) chips.
+config SPI_BFIN
+ tristate "SPI controller driver for ADI Blackfin5xx"
+ depends on SPI_MASTER && BFIN
+ help
+ This is the SPI controller master driver for Blackfin 5xx processor.
+
config SPI_BITBANG
tristate "Bitbanging SPI master"
depends on SPI_MASTER && EXPERIMENTAL
@@ -157,7 +163,6 @@
# Add new SPI protocol masters in alphabetical order above this line
#
-
# (slave support would go here)
endmenu # "SPI support"
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index 3c280ad..a95ade85 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -11,8 +11,9 @@
obj-$(CONFIG_SPI_MASTER) += spi.o
# SPI master controller drivers (bus)
-obj-$(CONFIG_SPI_BITBANG) += spi_bitbang.o
obj-$(CONFIG_SPI_ATMEL) += atmel_spi.o
+obj-$(CONFIG_SPI_BFIN) += spi_bfin5xx.o
+obj-$(CONFIG_SPI_BITBANG) += spi_bitbang.o
obj-$(CONFIG_SPI_BUTTERFLY) += spi_butterfly.o
obj-$(CONFIG_SPI_IMX) += spi_imx.o
obj-$(CONFIG_SPI_PXA2XX) += pxa2xx_spi.o
diff --git a/drivers/spi/spi_bfin5xx.c b/drivers/spi/spi_bfin5xx.c
new file mode 100644
index 0000000..ce3c0ce
--- /dev/null
+++ b/drivers/spi/spi_bfin5xx.c
@@ -0,0 +1,1313 @@
+/*
+ * File: drivers/spi/bfin5xx_spi.c
+ * Based on: N/A
+ * Author: Luke Yang (Analog Devices Inc.)
+ *
+ * Created: March. 10th 2006
+ * Description: SPI controller driver for Blackfin 5xx
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Modified:
+ * March 10, 2006 bfin5xx_spi.c Created. (Luke Yang)
+ * August 7, 2006 added full duplex mode (Axel Weiss & Luke Yang)
+ *
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * This program is free software ; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation ; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY ; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program ; see the file COPYING.
+ * If not, write to the Free Software Foundation,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/ioport.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/spi/spi.h>
+#include <linux/workqueue.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/delay.h>
+#include <asm/dma.h>
+
+#include <asm/bfin5xx_spi.h>
+
+MODULE_AUTHOR("Luke Yang");
+MODULE_DESCRIPTION("Blackfin 5xx SPI Contoller");
+MODULE_LICENSE("GPL");
+
+#define IS_DMA_ALIGNED(x) (((u32)(x)&0x07)==0)
+
+#define DEFINE_SPI_REG(reg, off) \
+static inline u16 read_##reg(void) \
+ { return *(volatile unsigned short*)(SPI0_REGBASE + off); } \
+static inline void write_##reg(u16 v) \
+ {*(volatile unsigned short*)(SPI0_REGBASE + off) = v;\
+ SSYNC();}
+
+DEFINE_SPI_REG(CTRL, 0x00)
+DEFINE_SPI_REG(FLAG, 0x04)
+DEFINE_SPI_REG(STAT, 0x08)
+DEFINE_SPI_REG(TDBR, 0x0C)
+DEFINE_SPI_REG(RDBR, 0x10)
+DEFINE_SPI_REG(BAUD, 0x14)
+DEFINE_SPI_REG(SHAW, 0x18)
+#define START_STATE ((void*)0)
+#define RUNNING_STATE ((void*)1)
+#define DONE_STATE ((void*)2)
+#define ERROR_STATE ((void*)-1)
+#define QUEUE_RUNNING 0
+#define QUEUE_STOPPED 1
+int dma_requested;
+
+struct driver_data {
+ /* Driver model hookup */
+ struct platform_device *pdev;
+
+ /* SPI framework hookup */
+ struct spi_master *master;
+
+ /* BFIN hookup */
+ struct bfin5xx_spi_master *master_info;
+
+ /* Driver message queue */
+ struct workqueue_struct *workqueue;
+ struct work_struct pump_messages;
+ spinlock_t lock;
+ struct list_head queue;
+ int busy;
+ int run;
+
+ /* Message Transfer pump */
+ struct tasklet_struct pump_transfers;
+
+ /* Current message transfer state info */
+ struct spi_message *cur_msg;
+ struct spi_transfer *cur_transfer;
+ struct chip_data *cur_chip;
+ size_t len_in_bytes;
+ size_t len;
+ void *tx;
+ void *tx_end;
+ void *rx;
+ void *rx_end;
+ int dma_mapped;
+ dma_addr_t rx_dma;
+ dma_addr_t tx_dma;
+ size_t rx_map_len;
+ size_t tx_map_len;
+ u8 n_bytes;
+ void (*write) (struct driver_data *);
+ void (*read) (struct driver_data *);
+ void (*duplex) (struct driver_data *);
+};
+
+struct chip_data {
+ u16 ctl_reg;
+ u16 baud;
+ u16 flag;
+
+ u8 chip_select_num;
+ u8 n_bytes;
+ u32 width; /* 0 or 1 */
+ u8 enable_dma;
+ u8 bits_per_word; /* 8 or 16 */
+ u8 cs_change_per_word;
+ u8 cs_chg_udelay;
+ void (*write) (struct driver_data *);
+ void (*read) (struct driver_data *);
+ void (*duplex) (struct driver_data *);
+};
+
+void bfin_spi_enable(struct driver_data *drv_data)
+{
+ u16 cr;
+
+ cr = read_CTRL();
+ write_CTRL(cr | BIT_CTL_ENABLE);
+ SSYNC();
+}
+
+void bfin_spi_disable(struct driver_data *drv_data)
+{
+ u16 cr;
+
+ cr = read_CTRL();
+ write_CTRL(cr & (~BIT_CTL_ENABLE));
+ SSYNC();
+}
+
+/* Caculate the SPI_BAUD register value based on input HZ */
+static u16 hz_to_spi_baud(u32 speed_hz)
+{
+ u_long sclk = get_sclk();
+ u16 spi_baud = (sclk / (2 * speed_hz));
+
+ if ((sclk % (2 * speed_hz)) > 0)
+ spi_baud++;
+
+ pr_debug("sclk = %ld, speed_hz = %d, spi_baud = %d\n", sclk, speed_hz,
+ spi_baud);
+
+ return spi_baud;
+}
+
+static int flush(struct driver_data *drv_data)
+{
+ unsigned long limit = loops_per_jiffy << 1;
+
+ /* wait for stop and clear stat */
+ while (!(read_STAT() & BIT_STAT_SPIF) && limit--)
+ continue;
+
+ write_STAT(BIT_STAT_CLR);
+
+ return limit;
+}
+
+/* stop controller and re-config current chip*/
+static void restore_state(struct driver_data *drv_data)
+{
+ struct chip_data *chip = drv_data->cur_chip;
+
+ /* Clear status and disable clock */
+ write_STAT(BIT_STAT_CLR);
+ bfin_spi_disable(drv_data);
+ pr_debug("restoring spi ctl state\n");
+
+#if defined(CONFIG_BF534) || defined(CONFIG_BF536) || defined(CONFIG_BF537)
+ pr_debug("chip select number is %d\n", chip->chip_select_num);
+
+ switch (chip->chip_select_num) {
+ case 1:
+ bfin_write_PORTF_FER(bfin_read_PORTF_FER() | 0x3c00);
+ SSYNC();
+ break;
+
+ case 2:
+ case 3:
+ bfin_write_PORT_MUX(bfin_read_PORT_MUX() | PJSE_SPI);
+ SSYNC();
+ bfin_write_PORTF_FER(bfin_read_PORTF_FER() | 0x3800);
+ SSYNC();
+ break;
+
+ case 4:
+ bfin_write_PORT_MUX(bfin_read_PORT_MUX() | PFS4E_SPI);
+ SSYNC();
+ bfin_write_PORTF_FER(bfin_read_PORTF_FER() | 0x3840);
+ SSYNC();
+ break;
+
+ case 5:
+ bfin_write_PORT_MUX(bfin_read_PORT_MUX() | PFS5E_SPI);
+ SSYNC();
+ bfin_write_PORTF_FER(bfin_read_PORTF_FER() | 0x3820);
+ SSYNC();
+ break;
+
+ case 6:
+ bfin_write_PORT_MUX(bfin_read_PORT_MUX() | PFS6E_SPI);
+ SSYNC();
+ bfin_write_PORTF_FER(bfin_read_PORTF_FER() | 0x3810);
+ SSYNC();
+ break;
+
+ case 7:
+ bfin_write_PORT_MUX(bfin_read_PORT_MUX() | PJCE_SPI);
+ SSYNC();
+ bfin_write_PORTF_FER(bfin_read_PORTF_FER() | 0x3800);
+ SSYNC();
+ break;
+ }
+#endif
+
+ /* Load the registers */
+ write_CTRL(chip->ctl_reg);
+ write_BAUD(chip->baud);
+ write_FLAG(chip->flag);
+}
+
+/* used to kick off transfer in rx mode */
+static unsigned short dummy_read(void)
+{
+ unsigned short tmp;
+ tmp = read_RDBR();
+ return tmp;
+}
+
+static void null_writer(struct driver_data *drv_data)
+{
+ u8 n_bytes = drv_data->n_bytes;
+
+ while (drv_data->tx < drv_data->tx_end) {
+ write_TDBR(0);
+ while ((read_STAT() & BIT_STAT_TXS))
+ continue;
+ drv_data->tx += n_bytes;
+ }
+}
+
+static void null_reader(struct driver_data *drv_data)
+{
+ u8 n_bytes = drv_data->n_bytes;
+ dummy_read();
+
+ while (drv_data->rx < drv_data->rx_end) {
+ while (!(read_STAT() & BIT_STAT_RXS))
+ continue;
+ dummy_read();
+ drv_data->rx += n_bytes;
+ }
+}
+
+static void u8_writer(struct driver_data *drv_data)
+{
+ pr_debug("cr8-s is 0x%x\n", read_STAT());
+ while (drv_data->tx < drv_data->tx_end) {
+ write_TDBR(*(u8 *) (drv_data->tx));
+ while (read_STAT() & BIT_STAT_TXS)
+ continue;
+ ++drv_data->tx;
+ }
+
+ /* poll for SPI completion before returning */
+ while (!(read_STAT() & BIT_STAT_SPIF))
+ continue;
+}
+
+static void u8_cs_chg_writer(struct driver_data *drv_data)
+{
+ struct chip_data *chip = drv_data->cur_chip;
+
+ while (drv_data->tx < drv_data->tx_end) {
+ write_FLAG(chip->flag);
+ SSYNC();
+
+ write_TDBR(*(u8 *) (drv_data->tx));
+ while (read_STAT() & BIT_STAT_TXS)
+ continue;
+ while (!(read_STAT() & BIT_STAT_SPIF))
+ continue;
+ write_FLAG(0xFF00 | chip->flag);
+ SSYNC();
+ if (chip->cs_chg_udelay)
+ udelay(chip->cs_chg_udelay);
+ ++drv_data->tx;
+ }
+ write_FLAG(0xFF00);
+ SSYNC();
+}
+
+static void u8_reader(struct driver_data *drv_data)
+{
+ pr_debug("cr-8 is 0x%x\n", read_STAT());
+
+ /* clear TDBR buffer before read(else it will be shifted out) */
+ write_TDBR(0xFFFF);
+
+ dummy_read();
+
+ while (drv_data->rx < drv_data->rx_end - 1) {
+ while (!(read_STAT() & BIT_STAT_RXS))
+ continue;
+ *(u8 *) (drv_data->rx) = read_RDBR();
+ ++drv_data->rx;
+ }
+
+ while (!(read_STAT() & BIT_STAT_RXS))
+ continue;
+ *(u8 *) (drv_data->rx) = read_SHAW();
+ ++drv_data->rx;
+}
+
+static void u8_cs_chg_reader(struct driver_data *drv_data)
+{
+ struct chip_data *chip = drv_data->cur_chip;
+
+ while (drv_data->rx < drv_data->rx_end) {
+ write_FLAG(chip->flag);
+ SSYNC();
+
+ read_RDBR(); /* kick off */
+ while (!(read_STAT() & BIT_STAT_RXS))
+ continue;
+ while (!(read_STAT() & BIT_STAT_SPIF))
+ continue;
+ *(u8 *) (drv_data->rx) = read_SHAW();
+ write_FLAG(0xFF00 | chip->flag);
+ SSYNC();
+ if (chip->cs_chg_udelay)
+ udelay(chip->cs_chg_udelay);
+ ++drv_data->rx;
+ }
+ write_FLAG(0xFF00);
+ SSYNC();
+}
+
+static void u8_duplex(struct driver_data *drv_data)
+{
+ /* in duplex mode, clk is triggered by writing of TDBR */
+ while (drv_data->rx < drv_data->rx_end) {
+ write_TDBR(*(u8 *) (drv_data->tx));
+ while (!(read_STAT() & BIT_STAT_SPIF))
+ continue;
+ while (!(read_STAT() & BIT_STAT_RXS))
+ continue;
+ *(u8 *) (drv_data->rx) = read_RDBR();
+ ++drv_data->rx;
+ ++drv_data->tx;
+ }
+}
+
+static void u8_cs_chg_duplex(struct driver_data *drv_data)
+{
+ struct chip_data *chip = drv_data->cur_chip;
+
+ while (drv_data->rx < drv_data->rx_end) {
+ write_FLAG(chip->flag);
+ SSYNC();
+
+ write_TDBR(*(u8 *) (drv_data->tx));
+ while (!(read_STAT() & BIT_STAT_SPIF))
+ continue;
+ while (!(read_STAT() & BIT_STAT_RXS))
+ continue;
+ *(u8 *) (drv_data->rx) = read_RDBR();
+ write_FLAG(0xFF00 | chip->flag);
+ SSYNC();
+ if (chip->cs_chg_udelay)
+ udelay(chip->cs_chg_udelay);
+ ++drv_data->rx;
+ ++drv_data->tx;
+ }
+ write_FLAG(0xFF00);
+ SSYNC();
+}
+
+static void u16_writer(struct driver_data *drv_data)
+{
+ pr_debug("cr16 is 0x%x\n", read_STAT());
+ while (drv_data->tx < drv_data->tx_end) {
+ write_TDBR(*(u16 *) (drv_data->tx));
+ while ((read_STAT() & BIT_STAT_TXS))
+ continue;
+ drv_data->tx += 2;
+ }
+
+ /* poll for SPI completion before returning */
+ while (!(read_STAT() & BIT_STAT_SPIF))
+ continue;
+}
+
+static void u16_cs_chg_writer(struct driver_data *drv_data)
+{
+ struct chip_data *chip = drv_data->cur_chip;
+
+ while (drv_data->tx < drv_data->tx_end) {
+ write_FLAG(chip->flag);
+ SSYNC();
+
+ write_TDBR(*(u16 *) (drv_data->tx));
+ while ((read_STAT() & BIT_STAT_TXS))
+ continue;
+ while (!(read_STAT() & BIT_STAT_SPIF))
+ continue;
+ write_FLAG(0xFF00 | chip->flag);
+ SSYNC();
+ if (chip->cs_chg_udelay)
+ udelay(chip->cs_chg_udelay);
+ drv_data->tx += 2;
+ }
+ write_FLAG(0xFF00);
+ SSYNC();
+}
+
+static void u16_reader(struct driver_data *drv_data)
+{
+ pr_debug("cr-16 is 0x%x\n", read_STAT());
+ dummy_read();
+
+ while (drv_data->rx < (drv_data->rx_end - 2)) {
+ while (!(read_STAT() & BIT_STAT_RXS))
+ continue;
+ *(u16 *) (drv_data->rx) = read_RDBR();
+ drv_data->rx += 2;
+ }
+
+ while (!(read_STAT() & BIT_STAT_RXS))
+ continue;
+ *(u16 *) (drv_data->rx) = read_SHAW();
+ drv_data->rx += 2;
+}
+
+static void u16_cs_chg_reader(struct driver_data *drv_data)
+{
+ struct chip_data *chip = drv_data->cur_chip;
+
+ while (drv_data->rx < drv_data->rx_end) {
+ write_FLAG(chip->flag);
+ SSYNC();
+
+ read_RDBR(); /* kick off */
+ while (!(read_STAT() & BIT_STAT_RXS))
+ continue;
+ while (!(read_STAT() & BIT_STAT_SPIF))
+ continue;
+ *(u16 *) (drv_data->rx) = read_SHAW();
+ write_FLAG(0xFF00 | chip->flag);
+ SSYNC();
+ if (chip->cs_chg_udelay)
+ udelay(chip->cs_chg_udelay);
+ drv_data->rx += 2;
+ }
+ write_FLAG(0xFF00);
+ SSYNC();
+}
+
+static void u16_duplex(struct driver_data *drv_data)
+{
+ /* in duplex mode, clk is triggered by writing of TDBR */
+ while (drv_data->tx < drv_data->tx_end) {
+ write_TDBR(*(u16 *) (drv_data->tx));
+ while (!(read_STAT() & BIT_STAT_SPIF))
+ continue;
+ while (!(read_STAT() & BIT_STAT_RXS))
+ continue;
+ *(u16 *) (drv_data->rx) = read_RDBR();
+ drv_data->rx += 2;
+ drv_data->tx += 2;
+ }
+}
+
+static void u16_cs_chg_duplex(struct driver_data *drv_data)
+{
+ struct chip_data *chip = drv_data->cur_chip;
+
+ while (drv_data->tx < drv_data->tx_end) {
+ write_FLAG(chip->flag);
+ SSYNC();
+
+ write_TDBR(*(u16 *) (drv_data->tx));
+ while (!(read_STAT() & BIT_STAT_SPIF))
+ continue;
+ while (!(read_STAT() & BIT_STAT_RXS))
+ continue;
+ *(u16 *) (drv_data->rx) = read_RDBR();
+ write_FLAG(0xFF00 | chip->flag);
+ SSYNC();
+ if (chip->cs_chg_udelay)
+ udelay(chip->cs_chg_udelay);
+ drv_data->rx += 2;
+ drv_data->tx += 2;
+ }
+ write_FLAG(0xFF00);
+ SSYNC();
+}
+
+/* test if ther is more transfer to be done */
+static void *next_transfer(struct driver_data *drv_data)
+{
+ struct spi_message *msg = drv_data->cur_msg;
+ struct spi_transfer *trans = drv_data->cur_transfer;
+
+ /* Move to next transfer */
+ if (trans->transfer_list.next != &msg->transfers) {
+ drv_data->cur_transfer =
+ list_entry(trans->transfer_list.next,
+ struct spi_transfer, transfer_list);
+ return RUNNING_STATE;
+ } else
+ return DONE_STATE;
+}
+
+/*
+ * caller already set message->status;
+ * dma and pio irqs are blocked give finished message back
+ */
+static void giveback(struct driver_data *drv_data)
+{
+ struct spi_transfer *last_transfer;
+ unsigned long flags;
+ struct spi_message *msg;
+
+ spin_lock_irqsave(&drv_data->lock, flags);
+ msg = drv_data->cur_msg;
+ drv_data->cur_msg = NULL;
+ drv_data->cur_transfer = NULL;
+ drv_data->cur_chip = NULL;
+ queue_work(drv_data->workqueue, &drv_data->pump_messages);
+ spin_unlock_irqrestore(&drv_data->lock, flags);
+
+ last_transfer = list_entry(msg->transfers.prev,
+ struct spi_transfer, transfer_list);
+
+ msg->state = NULL;
+
+ /* disable chip select signal. And not stop spi in autobuffer mode */
+ if (drv_data->tx_dma != 0xFFFF) {
+ write_FLAG(0xFF00);
+ bfin_spi_disable(drv_data);
+ }
+
+ if (msg->complete)
+ msg->complete(msg->context);
+}
+
+static irqreturn_t dma_irq_handler(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct driver_data *drv_data = (struct driver_data *)dev_id;
+ struct spi_message *msg = drv_data->cur_msg;
+
+ pr_debug("in dma_irq_handler\n");
+ clear_dma_irqstat(CH_SPI);
+
+ /*
+ * wait for the last transaction shifted out. yes, these two
+ * while loops are supposed to be the same (see the HRM).
+ */
+ if (drv_data->tx != NULL) {
+ while (bfin_read_SPI_STAT() & TXS)
+ continue;
+ while (bfin_read_SPI_STAT() & TXS)
+ continue;
+ }
+
+ while (!(bfin_read_SPI_STAT() & SPIF))
+ continue;
+
+ bfin_spi_disable(drv_data);
+
+ msg->actual_length += drv_data->len_in_bytes;
+
+ /* Move to next transfer */
+ msg->state = next_transfer(drv_data);
+
+ /* Schedule transfer tasklet */
+ tasklet_schedule(&drv_data->pump_transfers);
+
+ /* free the irq handler before next transfer */
+ pr_debug("disable dma channel irq%d\n", CH_SPI);
+ dma_disable_irq(CH_SPI);
+
+ return IRQ_HANDLED;
+}
+
+static void pump_transfers(unsigned long data)
+{
+ struct driver_data *drv_data = (struct driver_data *)data;
+ struct spi_message *message = NULL;
+ struct spi_transfer *transfer = NULL;
+ struct spi_transfer *previous = NULL;
+ struct chip_data *chip = NULL;
+ u16 cr, width, dma_width, dma_config;
+ u32 tranf_success = 1;
+
+ /* Get current state information */
+ message = drv_data->cur_msg;
+ transfer = drv_data->cur_transfer;
+ chip = drv_data->cur_chip;
+
+ /*
+ * if msg is error or done, report it back using complete() callback
+ */
+
+ /* Handle for abort */
+ if (message->state == ERROR_STATE) {
+ message->status = -EIO;
+ giveback(drv_data);
+ return;
+ }
+
+ /* Handle end of message */
+ if (message->state == DONE_STATE) {
+ message->status = 0;
+ giveback(drv_data);
+ return;
+ }
+
+ /* Delay if requested at end of transfer */
+ if (message->state == RUNNING_STATE) {
+ previous = list_entry(transfer->transfer_list.prev,
+ struct spi_transfer, transfer_list);
+ if (previous->delay_usecs)
+ udelay(previous->delay_usecs);
+ }
+
+ /* Setup the transfer state based on the type of transfer */
+ if (flush(drv_data) == 0) {
+ dev_err(&drv_data->pdev->dev, "pump_transfers: flush failed\n");
+ message->status = -EIO;
+ giveback(drv_data);
+ return;
+ }
+
+ if (transfer->tx_buf != NULL) {
+ drv_data->tx = (void *)transfer->tx_buf;
+ drv_data->tx_end = drv_data->tx + transfer->len;
+ pr_debug("tx_buf is %p, tx_end is %p\n", transfer->tx_buf,
+ drv_data->tx_end);
+ } else {
+ drv_data->tx = NULL;
+ }
+
+ if (transfer->rx_buf != NULL) {
+ drv_data->rx = transfer->rx_buf;
+ drv_data->rx_end = drv_data->rx + transfer->len;
+ pr_debug("rx_buf is %p, rx_end is %p\n", transfer->rx_buf,
+ drv_data->rx_end);
+ } else {
+ drv_data->rx = NULL;
+ }
+
+ drv_data->rx_dma = transfer->rx_dma;
+ drv_data->tx_dma = transfer->tx_dma;
+ drv_data->len_in_bytes = transfer->len;
+
+ width = chip->width;
+ if (width == CFG_SPI_WORDSIZE16) {
+ drv_data->len = (transfer->len) >> 1;
+ } else {
+ drv_data->len = transfer->len;
+ }
+ drv_data->write = drv_data->tx ? chip->write : null_writer;
+ drv_data->read = drv_data->rx ? chip->read : null_reader;
+ drv_data->duplex = chip->duplex ? chip->duplex : null_writer;
+ pr_debug
+ ("transfer: drv_data->write is %p, chip->write is %p, null_wr is %p\n",
+ drv_data->write, chip->write, null_writer);
+
+ /* speed and width has been set on per message */
+ message->state = RUNNING_STATE;
+ dma_config = 0;
+
+ /* restore spi status for each spi transfer */
+ if (transfer->speed_hz) {
+ write_BAUD(hz_to_spi_baud(transfer->speed_hz));
+ } else {
+ write_BAUD(chip->baud);
+ }
+ write_FLAG(chip->flag);
+
+ pr_debug("now pumping a transfer: width is %d, len is %d\n", width,
+ transfer->len);
+
+ /*
+ * Try to map dma buffer and do a dma transfer if
+ * successful use different way to r/w according to
+ * drv_data->cur_chip->enable_dma
+ */
+ if (drv_data->cur_chip->enable_dma && drv_data->len > 6) {
+
+ write_STAT(BIT_STAT_CLR);
+ disable_dma(CH_SPI);
+ clear_dma_irqstat(CH_SPI);
+ bfin_spi_disable(drv_data);
+
+ /* config dma channel */
+ pr_debug("doing dma transfer\n");
+ if (width == CFG_SPI_WORDSIZE16) {
+ set_dma_x_count(CH_SPI, drv_data->len);
+ set_dma_x_modify(CH_SPI, 2);
+ dma_width = WDSIZE_16;
+ } else {
+ set_dma_x_count(CH_SPI, drv_data->len);
+ set_dma_x_modify(CH_SPI, 1);
+ dma_width = WDSIZE_8;
+ }
+
+ /* set transfer width,direction. And enable spi */
+ cr = (read_CTRL() & (~BIT_CTL_TIMOD));
+
+ /* dirty hack for autobuffer DMA mode */
+ if (drv_data->tx_dma == 0xFFFF) {
+ pr_debug("doing autobuffer DMA out.\n");
+
+ /* no irq in autobuffer mode */
+ dma_config =
+ (DMAFLOW_AUTO | RESTART | dma_width | DI_EN);
+ set_dma_config(CH_SPI, dma_config);
+ set_dma_start_addr(CH_SPI, (unsigned long)drv_data->tx);
+ enable_dma(CH_SPI);
+ write_CTRL(cr | CFG_SPI_DMAWRITE | (width << 8) |
+ (CFG_SPI_ENABLE << 14));
+
+ /* just return here, there can only be one transfer in this mode */
+ message->status = 0;
+ giveback(drv_data);
+ return;
+ }
+
+ /* In dma mode, rx or tx must be NULL in one transfer */
+ if (drv_data->rx != NULL) {
+ /* set transfer mode, and enable SPI */
+ pr_debug("doing DMA in.\n");
+
+ /* disable SPI before write to TDBR */
+ write_CTRL(cr & ~BIT_CTL_ENABLE);
+
+ /* clear tx reg soformer data is not shifted out */
+ write_TDBR(0xFF);
+
+ set_dma_x_count(CH_SPI, drv_data->len);
+
+ /* start dma */
+ dma_enable_irq(CH_SPI);
+ dma_config = (WNR | RESTART | dma_width | DI_EN);
+ set_dma_config(CH_SPI, dma_config);
+ set_dma_start_addr(CH_SPI, (unsigned long)drv_data->rx);
+ enable_dma(CH_SPI);
+
+ cr |=
+ CFG_SPI_DMAREAD | (width << 8) | (CFG_SPI_ENABLE <<
+ 14);
+ /* set transfer mode, and enable SPI */
+ write_CTRL(cr);
+ } else if (drv_data->tx != NULL) {
+ pr_debug("doing DMA out.\n");
+
+ /* start dma */
+ dma_enable_irq(CH_SPI);
+ dma_config = (RESTART | dma_width | DI_EN);
+ set_dma_config(CH_SPI, dma_config);
+ set_dma_start_addr(CH_SPI, (unsigned long)drv_data->tx);
+ enable_dma(CH_SPI);
+
+ write_CTRL(cr | CFG_SPI_DMAWRITE | (width << 8) |
+ (CFG_SPI_ENABLE << 14));
+
+ }
+ } else {
+ /* IO mode write then read */
+ pr_debug("doing IO transfer\n");
+
+ write_STAT(BIT_STAT_CLR);
+
+ if (drv_data->tx != NULL && drv_data->rx != NULL) {
+ /* full duplex mode */
+ BUG_ON((drv_data->tx_end - drv_data->tx) !=
+ (drv_data->rx_end - drv_data->rx));
+ cr = (read_CTRL() & (~BIT_CTL_TIMOD)); /* clear the TIMOD bits */
+ cr |=
+ CFG_SPI_WRITE | (width << 8) | (CFG_SPI_ENABLE <<
+ 14);
+ pr_debug("IO duplex: cr is 0x%x\n", cr);
+
+ write_CTRL(cr);
+ SSYNC();
+
+ drv_data->duplex(drv_data);
+
+ if (drv_data->tx != drv_data->tx_end)
+ tranf_success = 0;
+ } else if (drv_data->tx != NULL) {
+ /* write only half duplex */
+ cr = (read_CTRL() & (~BIT_CTL_TIMOD)); /* clear the TIMOD bits */
+ cr |=
+ CFG_SPI_WRITE | (width << 8) | (CFG_SPI_ENABLE <<
+ 14);
+ pr_debug("IO write: cr is 0x%x\n", cr);
+
+ write_CTRL(cr);
+ SSYNC();
+
+ drv_data->write(drv_data);
+
+ if (drv_data->tx != drv_data->tx_end)
+ tranf_success = 0;
+ } else if (drv_data->rx != NULL) {
+ /* read only half duplex */
+ cr = (read_CTRL() & (~BIT_CTL_TIMOD)); /* cleare the TIMOD bits */
+ cr |=
+ CFG_SPI_READ | (width << 8) | (CFG_SPI_ENABLE <<
+ 14);
+ pr_debug("IO read: cr is 0x%x\n", cr);
+
+ write_CTRL(cr);
+ SSYNC();
+
+ drv_data->read(drv_data);
+ if (drv_data->rx != drv_data->rx_end)
+ tranf_success = 0;
+ }
+
+ if (!tranf_success) {
+ pr_debug("IO write error!\n");
+ message->state = ERROR_STATE;
+ } else {
+ /* Update total byte transfered */
+ message->actual_length += drv_data->len;
+
+ /* Move to next transfer of this msg */
+ message->state = next_transfer(drv_data);
+ }
+
+ /* Schedule next transfer tasklet */
+ tasklet_schedule(&drv_data->pump_transfers);
+
+ }
+}
+
+/* pop a msg from queue and kick off real transfer */
+static void pump_messages(struct work_struct *work)
+{
+ struct driver_data *drv_data = container_of(work, struct driver_data, pump_messages);
+ unsigned long flags;
+
+ /* Lock queue and check for queue work */
+ spin_lock_irqsave(&drv_data->lock, flags);
+ if (list_empty(&drv_data->queue) || drv_data->run == QUEUE_STOPPED) {
+ /* pumper kicked off but no work to do */
+ drv_data->busy = 0;
+ spin_unlock_irqrestore(&drv_data->lock, flags);
+ return;
+ }
+
+ /* Make sure we are not already running a message */
+ if (drv_data->cur_msg) {
+ spin_unlock_irqrestore(&drv_data->lock, flags);
+ return;
+ }
+
+ /* Extract head of queue */
+ drv_data->cur_msg = list_entry(drv_data->queue.next,
+ struct spi_message, queue);
+ list_del_init(&drv_data->cur_msg->queue);
+
+ /* Initial message state */
+ drv_data->cur_msg->state = START_STATE;
+ drv_data->cur_transfer = list_entry(drv_data->cur_msg->transfers.next,
+ struct spi_transfer, transfer_list);
+
+ /* Setup the SSP using the per chip configuration */
+ drv_data->cur_chip = spi_get_ctldata(drv_data->cur_msg->spi);
+ restore_state(drv_data);
+ pr_debug
+ ("got a message to pump, state is set to: baud %d, flag 0x%x, ctl 0x%x\n",
+ drv_data->cur_chip->baud, drv_data->cur_chip->flag,
+ drv_data->cur_chip->ctl_reg);
+ pr_debug("the first transfer len is %d\n", drv_data->cur_transfer->len);
+
+ /* Mark as busy and launch transfers */
+ tasklet_schedule(&drv_data->pump_transfers);
+
+ drv_data->busy = 1;
+ spin_unlock_irqrestore(&drv_data->lock, flags);
+}
+
+/*
+ * got a msg to transfer, queue it in drv_data->queue.
+ * And kick off message pumper
+ */
+static int transfer(struct spi_device *spi, struct spi_message *msg)
+{
+ struct driver_data *drv_data = spi_master_get_devdata(spi->master);
+ unsigned long flags;
+
+ spin_lock_irqsave(&drv_data->lock, flags);
+
+ if (drv_data->run == QUEUE_STOPPED) {
+ spin_unlock_irqrestore(&drv_data->lock, flags);
+ return -ESHUTDOWN;
+ }
+
+ msg->actual_length = 0;
+ msg->status = -EINPROGRESS;
+ msg->state = START_STATE;
+
+ pr_debug("adding an msg in transfer() \n");
+ list_add_tail(&msg->queue, &drv_data->queue);
+
+ if (drv_data->run == QUEUE_RUNNING && !drv_data->busy)
+ queue_work(drv_data->workqueue, &drv_data->pump_messages);
+
+ spin_unlock_irqrestore(&drv_data->lock, flags);
+
+ return 0;
+}
+
+/* first setup for new devices */
+static int setup(struct spi_device *spi)
+{
+ struct bfin5xx_spi_chip *chip_info = NULL;
+ struct chip_data *chip;
+ struct driver_data *drv_data = spi_master_get_devdata(spi->master);
+ u8 spi_flg;
+
+ /* Abort device setup if requested features are not supported */
+ if (spi->mode & ~(SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST)) {
+ dev_err(&spi->dev, "requested mode not fully supported\n");
+ return -EINVAL;
+ }
+
+ /* Zero (the default) here means 8 bits */
+ if (!spi->bits_per_word)
+ spi->bits_per_word = 8;
+
+ if (spi->bits_per_word != 8 && spi->bits_per_word != 16)
+ return -EINVAL;
+
+ /* Only alloc (or use chip_info) on first setup */
+ chip = spi_get_ctldata(spi);
+ if (chip == NULL) {
+ chip = kzalloc(sizeof(struct chip_data), GFP_KERNEL);
+ if (!chip)
+ return -ENOMEM;
+
+ chip->enable_dma = 0;
+ chip_info = spi->controller_data;
+ }
+
+ /* chip_info isn't always needed */
+ if (chip_info) {
+ chip->enable_dma = chip_info->enable_dma != 0
+ && drv_data->master_info->enable_dma;
+ chip->ctl_reg = chip_info->ctl_reg;
+ chip->bits_per_word = chip_info->bits_per_word;
+ chip->cs_change_per_word = chip_info->cs_change_per_word;
+ chip->cs_chg_udelay = chip_info->cs_chg_udelay;
+ }
+
+ /* translate common spi framework into our register */
+ if (spi->mode & SPI_CPOL)
+ chip->ctl_reg |= CPOL;
+ if (spi->mode & SPI_CPHA)
+ chip->ctl_reg |= CPHA;
+ if (spi->mode & SPI_LSB_FIRST)
+ chip->ctl_reg |= LSBF;
+ /* we dont support running in slave mode (yet?) */
+ chip->ctl_reg |= MSTR;
+
+ /*
+ * if any one SPI chip is registered and wants DMA, request the
+ * DMA channel for it
+ */
+ if (chip->enable_dma && !dma_requested) {
+ /* register dma irq handler */
+ if (request_dma(CH_SPI, "BF53x_SPI_DMA") < 0) {
+ pr_debug
+ ("Unable to request BlackFin SPI DMA channel\n");
+ return -ENODEV;
+ }
+ if (set_dma_callback(CH_SPI, (void *)dma_irq_handler, drv_data)
+ < 0) {
+ pr_debug("Unable to set dma callback\n");
+ return -EPERM;
+ }
+ dma_disable_irq(CH_SPI);
+ dma_requested = 1;
+ }
+
+ /*
+ * Notice: for blackfin, the speed_hz is the value of register
+ * SPI_BAUD, not the real baudrate
+ */
+ chip->baud = hz_to_spi_baud(spi->max_speed_hz);
+ spi_flg = ~(1 << (spi->chip_select));
+ chip->flag = ((u16) spi_flg << 8) | (1 << (spi->chip_select));
+ chip->chip_select_num = spi->chip_select;
+
+ switch (chip->bits_per_word) {
+ case 8:
+ chip->n_bytes = 1;
+ chip->width = CFG_SPI_WORDSIZE8;
+ chip->read = chip->cs_change_per_word ?
+ u8_cs_chg_reader : u8_reader;
+ chip->write = chip->cs_change_per_word ?
+ u8_cs_chg_writer : u8_writer;
+ chip->duplex = chip->cs_change_per_word ?
+ u8_cs_chg_duplex : u8_duplex;
+ break;
+
+ case 16:
+ chip->n_bytes = 2;
+ chip->width = CFG_SPI_WORDSIZE16;
+ chip->read = chip->cs_change_per_word ?
+ u16_cs_chg_reader : u16_reader;
+ chip->write = chip->cs_change_per_word ?
+ u16_cs_chg_writer : u16_writer;
+ chip->duplex = chip->cs_change_per_word ?
+ u16_cs_chg_duplex : u16_duplex;
+ break;
+
+ default:
+ dev_err(&spi->dev, "%d bits_per_word is not supported\n",
+ chip->bits_per_word);
+ kfree(chip);
+ return -ENODEV;
+ }
+
+ pr_debug("setup spi chip %s, width is %d, dma is %d,",
+ spi->modalias, chip->width, chip->enable_dma);
+ pr_debug("ctl_reg is 0x%x, flag_reg is 0x%x\n",
+ chip->ctl_reg, chip->flag);
+
+ spi_set_ctldata(spi, chip);
+
+ return 0;
+}
+
+/*
+ * callback for spi framework.
+ * clean driver specific data
+ */
+static void cleanup(const struct spi_device *spi)
+{
+ struct chip_data *chip = spi_get_ctldata((struct spi_device *)spi);
+
+ kfree(chip);
+}
+
+static inline int init_queue(struct driver_data *drv_data)
+{
+ INIT_LIST_HEAD(&drv_data->queue);
+ spin_lock_init(&drv_data->lock);
+
+ drv_data->run = QUEUE_STOPPED;
+ drv_data->busy = 0;
+
+ /* init transfer tasklet */
+ tasklet_init(&drv_data->pump_transfers,
+ pump_transfers, (unsigned long)drv_data);
+
+ /* init messages workqueue */
+ INIT_WORK(&drv_data->pump_messages, pump_messages);
+ drv_data->workqueue =
+ create_singlethread_workqueue(drv_data->master->cdev.dev->bus_id);
+ if (drv_data->workqueue == NULL)
+ return -EBUSY;
+
+ return 0;
+}
+
+static inline int start_queue(struct driver_data *drv_data)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&drv_data->lock, flags);
+
+ if (drv_data->run == QUEUE_RUNNING || drv_data->busy) {
+ spin_unlock_irqrestore(&drv_data->lock, flags);
+ return -EBUSY;
+ }
+
+ drv_data->run = QUEUE_RUNNING;
+ drv_data->cur_msg = NULL;
+ drv_data->cur_transfer = NULL;
+ drv_data->cur_chip = NULL;
+ spin_unlock_irqrestore(&drv_data->lock, flags);
+
+ queue_work(drv_data->workqueue, &drv_data->pump_messages);
+
+ return 0;
+}
+
+static inline int stop_queue(struct driver_data *drv_data)
+{
+ unsigned long flags;
+ unsigned limit = 500;
+ int status = 0;
+
+ spin_lock_irqsave(&drv_data->lock, flags);
+
+ /*
+ * This is a bit lame, but is optimized for the common execution path.
+ * A wait_queue on the drv_data->busy could be used, but then the common
+ * execution path (pump_messages) would be required to call wake_up or
+ * friends on every SPI message. Do this instead
+ */
+ drv_data->run = QUEUE_STOPPED;
+ while (!list_empty(&drv_data->queue) && drv_data->busy && limit--) {
+ spin_unlock_irqrestore(&drv_data->lock, flags);
+ msleep(10);
+ spin_lock_irqsave(&drv_data->lock, flags);
+ }
+
+ if (!list_empty(&drv_data->queue) || drv_data->busy)
+ status = -EBUSY;
+
+ spin_unlock_irqrestore(&drv_data->lock, flags);
+
+ return status;
+}
+
+static inline int destroy_queue(struct driver_data *drv_data)
+{
+ int status;
+
+ status = stop_queue(drv_data);
+ if (status != 0)
+ return status;
+
+ destroy_workqueue(drv_data->workqueue);
+
+ return 0;
+}
+
+static int __init bfin5xx_spi_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct bfin5xx_spi_master *platform_info;
+ struct spi_master *master;
+ struct driver_data *drv_data = 0;
+ int status = 0;
+
+ platform_info = dev->platform_data;
+
+ /* Allocate master with space for drv_data */
+ master = spi_alloc_master(dev, sizeof(struct driver_data) + 16);
+ if (!master) {
+ dev_err(&pdev->dev, "can not alloc spi_master\n");
+ return -ENOMEM;
+ }
+ drv_data = spi_master_get_devdata(master);
+ drv_data->master = master;
+ drv_data->master_info = platform_info;
+ drv_data->pdev = pdev;
+
+ master->bus_num = pdev->id;
+ master->num_chipselect = platform_info->num_chipselect;
+ master->cleanup = cleanup;
+ master->setup = setup;
+ master->transfer = transfer;
+
+ /* Initial and start queue */
+ status = init_queue(drv_data);
+ if (status != 0) {
+ dev_err(&pdev->dev, "problem initializing queue\n");
+ goto out_error_queue_alloc;
+ }
+ status = start_queue(drv_data);
+ if (status != 0) {
+ dev_err(&pdev->dev, "problem starting queue\n");
+ goto out_error_queue_alloc;
+ }
+
+ /* Register with the SPI framework */
+ platform_set_drvdata(pdev, drv_data);
+ status = spi_register_master(master);
+ if (status != 0) {
+ dev_err(&pdev->dev, "problem registering spi master\n");
+ goto out_error_queue_alloc;
+ }
+ pr_debug("controller probe successfully\n");
+ return status;
+
+ out_error_queue_alloc:
+ destroy_queue(drv_data);
+ spi_master_put(master);
+ return status;
+}
+
+/* stop hardware and remove the driver */
+static int __devexit bfin5xx_spi_remove(struct platform_device *pdev)
+{
+ struct driver_data *drv_data = platform_get_drvdata(pdev);
+ int status = 0;
+
+ if (!drv_data)
+ return 0;
+
+ /* Remove the queue */
+ status = destroy_queue(drv_data);
+ if (status != 0)
+ return status;
+
+ /* Disable the SSP at the peripheral and SOC level */
+ bfin_spi_disable(drv_data);
+
+ /* Release DMA */
+ if (drv_data->master_info->enable_dma) {
+ if (dma_channel_active(CH_SPI))
+ free_dma(CH_SPI);
+ }
+
+ /* Disconnect from the SPI framework */
+ spi_unregister_master(drv_data->master);
+
+ /* Prevent double remove */
+ platform_set_drvdata(pdev, NULL);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int bfin5xx_spi_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ struct driver_data *drv_data = platform_get_drvdata(pdev);
+ int status = 0;
+
+ status = stop_queue(drv_data);
+ if (status != 0)
+ return status;
+
+ /* stop hardware */
+ bfin_spi_disable(drv_data);
+
+ return 0;
+}
+
+static int bfin5xx_spi_resume(struct platform_device *pdev)
+{
+ struct driver_data *drv_data = platform_get_drvdata(pdev);
+ int status = 0;
+
+ /* Enable the SPI interface */
+ bfin_spi_enable(drv_data);
+
+ /* Start the queue running */
+ status = start_queue(drv_data);
+ if (status != 0) {
+ dev_err(&pdev->dev, "problem starting queue (%d)\n", status);
+ return status;
+ }
+
+ return 0;
+}
+#else
+#define bfin5xx_spi_suspend NULL
+#define bfin5xx_spi_resume NULL
+#endif /* CONFIG_PM */
+
+static struct platform_driver bfin5xx_spi_driver = {
+ .driver = {
+ .name = "bfin-spi-master",
+ .bus = &platform_bus_type,
+ .owner = THIS_MODULE,
+ },
+ .probe = bfin5xx_spi_probe,
+ .remove = __devexit_p(bfin5xx_spi_remove),
+ .suspend = bfin5xx_spi_suspend,
+ .resume = bfin5xx_spi_resume,
+};
+
+static int __init bfin5xx_spi_init(void)
+{
+ return platform_driver_register(&bfin5xx_spi_driver);
+}
+
+module_init(bfin5xx_spi_init);
+
+static void __exit bfin5xx_spi_exit(void)
+{
+ platform_driver_unregister(&bfin5xx_spi_driver);
+}
+
+module_exit(bfin5xx_spi_exit);
diff --git a/drivers/spi/spi_s3c24xx.c b/drivers/spi/spi_s3c24xx.c
index b10211c..d5a710f 100644
--- a/drivers/spi/spi_s3c24xx.c
+++ b/drivers/spi/spi_s3c24xx.c
@@ -342,8 +342,6 @@
goto err_register;
}
- dev_dbg(hw->dev, "shutdown=%d\n", hw->bitbang.shutdown);
-
/* register all the devices associated */
bi = &hw->pdata->board_info[0];
diff --git a/drivers/usb/host/ehci-ps3.c b/drivers/usb/host/ehci-ps3.c
index 4d781a2..9310745 100644
--- a/drivers/usb/host/ehci-ps3.c
+++ b/drivers/usb/host/ehci-ps3.c
@@ -73,13 +73,6 @@
#endif
};
-#if !defined(DEBUG)
-#undef dev_dbg
-static inline int __attribute__ ((format (printf, 2, 3))) dev_dbg(
- const struct device *_dev, const char *fmt, ...) {return 0;}
-#endif
-
-
static int ps3_ehci_sb_probe(struct ps3_system_bus_device *dev)
{
int result;
diff --git a/drivers/usb/host/ohci-ps3.c b/drivers/usb/host/ohci-ps3.c
index 62283a3..c849f72 100644
--- a/drivers/usb/host/ohci-ps3.c
+++ b/drivers/usb/host/ohci-ps3.c
@@ -75,14 +75,6 @@
#endif
};
-/* redefine dev_dbg to do a syntax check */
-
-#if !defined(DEBUG)
-#undef dev_dbg
-static inline int __attribute__ ((format (printf, 2, 3))) dev_dbg(
- const struct device *_dev, const char *fmt, ...) {return 0;}
-#endif
-
static int ps3_ohci_sb_probe(struct ps3_system_bus_device *dev)
{
int result;
diff --git a/fs/Kconfig.binfmt b/fs/Kconfig.binfmt
index f3d3d81..74c6440 100644
--- a/fs/Kconfig.binfmt
+++ b/fs/Kconfig.binfmt
@@ -26,7 +26,7 @@
config BINFMT_ELF_FDPIC
bool "Kernel support for FDPIC ELF binaries"
default y
- depends on FRV
+ depends on (FRV || BLACKFIN)
help
ELF FDPIC binaries are based on ELF, but allow the individual load
segments of a binary to be located in memory independently of each
diff --git a/fs/adfs/super.c b/fs/adfs/super.c
index 2e5f2c8..30c2965 100644
--- a/fs/adfs/super.c
+++ b/fs/adfs/super.c
@@ -232,8 +232,7 @@
{
struct adfs_inode_info *ei = (struct adfs_inode_info *) foo;
- if ((flags & (SLAB_CTOR_VERIFY|SLAB_CTOR_CONSTRUCTOR)) ==
- SLAB_CTOR_CONSTRUCTOR)
+ if (flags & SLAB_CTOR_CONSTRUCTOR)
inode_init_once(&ei->vfs_inode);
}
diff --git a/fs/affs/super.c b/fs/affs/super.c
index c3986a1..beff7d2 100644
--- a/fs/affs/super.c
+++ b/fs/affs/super.c
@@ -87,8 +87,7 @@
{
struct affs_inode_info *ei = (struct affs_inode_info *) foo;
- if ((flags & (SLAB_CTOR_VERIFY|SLAB_CTOR_CONSTRUCTOR)) ==
- SLAB_CTOR_CONSTRUCTOR) {
+ if (flags & SLAB_CTOR_CONSTRUCTOR) {
init_MUTEX(&ei->i_link_lock);
init_MUTEX(&ei->i_ext_lock);
inode_init_once(&ei->vfs_inode);
diff --git a/fs/afs/dir.c b/fs/afs/dir.c
index dac5b99..0c1e902 100644
--- a/fs/afs/dir.c
+++ b/fs/afs/dir.c
@@ -194,10 +194,7 @@
page = read_mapping_page(dir->i_mapping, index, &file);
if (!IS_ERR(page)) {
- wait_on_page_locked(page);
kmap(page);
- if (!PageUptodate(page))
- goto fail;
if (!PageChecked(page))
afs_dir_check_page(dir, page);
if (PageError(page))
diff --git a/fs/afs/mntpt.c b/fs/afs/mntpt.c
index b905ae3..034fcfd 100644
--- a/fs/afs/mntpt.c
+++ b/fs/afs/mntpt.c
@@ -68,13 +68,11 @@
}
ret = -EIO;
- wait_on_page_locked(page);
- buf = kmap(page);
- if (!PageUptodate(page))
- goto out_free;
if (PageError(page))
goto out_free;
+ buf = kmap(page);
+
/* examine the symlink's contents */
size = vnode->status.size;
_debug("symlink to %*.*s", (int) size, (int) size, buf);
@@ -91,8 +89,8 @@
ret = 0;
-out_free:
kunmap(page);
+out_free:
page_cache_release(page);
out:
_leave(" = %d", ret);
@@ -171,8 +169,7 @@
}
ret = -EIO;
- wait_on_page_locked(page);
- if (!PageUptodate(page) || PageError(page))
+ if (PageError(page))
goto error;
buf = kmap(page);
diff --git a/fs/afs/super.c b/fs/afs/super.c
index 41173f8..7030d76 100644
--- a/fs/afs/super.c
+++ b/fs/afs/super.c
@@ -453,8 +453,7 @@
{
struct afs_vnode *vnode = _vnode;
- if ((flags & (SLAB_CTOR_VERIFY|SLAB_CTOR_CONSTRUCTOR)) ==
- SLAB_CTOR_CONSTRUCTOR) {
+ if (flags & SLAB_CTOR_CONSTRUCTOR) {
memset(vnode, 0, sizeof(*vnode));
inode_init_once(&vnode->vfs_inode);
init_waitqueue_head(&vnode->update_waitq);
diff --git a/fs/aio.c b/fs/aio.c
index e4598d6..b97ab80 100644
--- a/fs/aio.c
+++ b/fs/aio.c
@@ -68,10 +68,8 @@
*/
static int __init aio_setup(void)
{
- kiocb_cachep = kmem_cache_create("kiocb", sizeof(struct kiocb),
- 0, SLAB_HWCACHE_ALIGN|SLAB_PANIC, NULL, NULL);
- kioctx_cachep = kmem_cache_create("kioctx", sizeof(struct kioctx),
- 0, SLAB_HWCACHE_ALIGN|SLAB_PANIC, NULL, NULL);
+ kiocb_cachep = KMEM_CACHE(kiocb, SLAB_HWCACHE_ALIGN|SLAB_PANIC);
+ kioctx_cachep = KMEM_CACHE(kioctx,SLAB_HWCACHE_ALIGN|SLAB_PANIC);
aio_wq = create_workqueue("aio");
diff --git a/fs/befs/linuxvfs.c b/fs/befs/linuxvfs.c
index cc6cc8e..fe96108 100644
--- a/fs/befs/linuxvfs.c
+++ b/fs/befs/linuxvfs.c
@@ -293,8 +293,7 @@
{
struct befs_inode_info *bi = (struct befs_inode_info *) foo;
- if ((flags & (SLAB_CTOR_VERIFY|SLAB_CTOR_CONSTRUCTOR)) ==
- SLAB_CTOR_CONSTRUCTOR) {
+ if (flags & SLAB_CTOR_CONSTRUCTOR) {
inode_init_once(&bi->vfs_inode);
}
}
diff --git a/fs/bfs/inode.c b/fs/bfs/inode.c
index 93d6219..edc08d8 100644
--- a/fs/bfs/inode.c
+++ b/fs/bfs/inode.c
@@ -248,8 +248,7 @@
{
struct bfs_inode_info *bi = foo;
- if ((flags & (SLAB_CTOR_VERIFY|SLAB_CTOR_CONSTRUCTOR)) ==
- SLAB_CTOR_CONSTRUCTOR)
+ if (flags & SLAB_CTOR_CONSTRUCTOR)
inode_init_once(&bi->vfs_inode);
}
diff --git a/fs/bio.c b/fs/bio.c
index 693940d..093345f 100644
--- a/fs/bio.c
+++ b/fs/bio.c
@@ -1193,8 +1193,7 @@
static int __init init_bio(void)
{
- bio_slab = kmem_cache_create("bio", sizeof(struct bio), 0,
- SLAB_HWCACHE_ALIGN|SLAB_PANIC, NULL, NULL);
+ bio_slab = KMEM_CACHE(bio, SLAB_HWCACHE_ALIGN|SLAB_PANIC);
biovec_init_slabs();
diff --git a/fs/block_dev.c b/fs/block_dev.c
index 575076c..f02b7bd 100644
--- a/fs/block_dev.c
+++ b/fs/block_dev.c
@@ -55,10 +55,12 @@
return retval;
}
-/* Kill _all_ buffers, dirty or not.. */
+/* Kill _all_ buffers and pagecache , dirty or not.. */
static void kill_bdev(struct block_device *bdev)
{
- invalidate_bdev(bdev, 1);
+ if (bdev->bd_inode->i_mapping->nrpages == 0)
+ return;
+ invalidate_bh_lrus();
truncate_inode_pages(bdev->bd_inode->i_mapping, 0);
}
@@ -455,9 +457,7 @@
struct bdev_inode *ei = (struct bdev_inode *) foo;
struct block_device *bdev = &ei->bdev;
- if ((flags & (SLAB_CTOR_VERIFY|SLAB_CTOR_CONSTRUCTOR)) ==
- SLAB_CTOR_CONSTRUCTOR)
- {
+ if (flags & SLAB_CTOR_CONSTRUCTOR) {
memset(bdev, 0, sizeof(*bdev));
mutex_init(&bdev->bd_mutex);
sema_init(&bdev->bd_mount_sem, 1);
@@ -1478,7 +1478,7 @@
res = invalidate_inodes(sb);
drop_super(sb);
}
- invalidate_bdev(bdev, 0);
+ invalidate_bdev(bdev);
return res;
}
EXPORT_SYMBOL(__invalidate_device);
diff --git a/fs/buffer.c b/fs/buffer.c
index 1d0852f..7db24b9 100644
--- a/fs/buffer.c
+++ b/fs/buffer.c
@@ -44,7 +44,6 @@
#include <linux/bit_spinlock.h>
static int fsync_buffers_list(spinlock_t *lock, struct list_head *list);
-static void invalidate_bh_lrus(void);
#define BH_ENTRY(list) list_entry((list), struct buffer_head, b_assoc_buffers)
@@ -333,7 +332,7 @@
we think the disk contains more recent information than the buffercache.
The update == 1 pass marks the buffers we need to update, the update == 2
pass does the actual I/O. */
-void invalidate_bdev(struct block_device *bdev, int destroy_dirty_buffers)
+void invalidate_bdev(struct block_device *bdev)
{
struct address_space *mapping = bdev->bd_inode->i_mapping;
@@ -341,11 +340,6 @@
return;
invalidate_bh_lrus();
- /*
- * FIXME: what about destroy_dirty_buffers?
- * We really want to use invalidate_inode_pages2() for
- * that, but not until that's cleaned up.
- */
invalidate_mapping_pages(mapping, 0, -1);
}
@@ -1408,7 +1402,7 @@
put_cpu_var(bh_lrus);
}
-static void invalidate_bh_lrus(void)
+void invalidate_bh_lrus(void)
{
on_each_cpu(invalidate_bh_lru, NULL, 1, 1);
}
@@ -1700,17 +1694,8 @@
* clean. Someone wrote them back by hand with
* ll_rw_block/submit_bh. A rare case.
*/
- int uptodate = 1;
- do {
- if (!buffer_uptodate(bh)) {
- uptodate = 0;
- break;
- }
- bh = bh->b_this_page;
- } while (bh != head);
- if (uptodate)
- SetPageUptodate(page);
end_page_writeback(page);
+
/*
* The page and buffer_heads can be released at any time from
* here on.
@@ -2968,8 +2953,7 @@
static void
init_buffer_head(void *data, struct kmem_cache *cachep, unsigned long flags)
{
- if ((flags & (SLAB_CTOR_VERIFY|SLAB_CTOR_CONSTRUCTOR)) ==
- SLAB_CTOR_CONSTRUCTOR) {
+ if (flags & SLAB_CTOR_CONSTRUCTOR) {
struct buffer_head * bh = (struct buffer_head *)data;
memset(bh, 0, sizeof(*bh));
diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c
index 5036dae..8568e10 100644
--- a/fs/cifs/cifsfs.c
+++ b/fs/cifs/cifsfs.c
@@ -701,8 +701,7 @@
{
struct cifsInodeInfo *cifsi = inode;
- if ((flags & (SLAB_CTOR_VERIFY | SLAB_CTOR_CONSTRUCTOR)) ==
- SLAB_CTOR_CONSTRUCTOR) {
+ if (flags & SLAB_CTOR_CONSTRUCTOR) {
inode_init_once(&cifsi->vfs_inode);
INIT_LIST_HEAD(&cifsi->lockList);
}
diff --git a/fs/coda/inode.c b/fs/coda/inode.c
index 614175a..0aaff36 100644
--- a/fs/coda/inode.c
+++ b/fs/coda/inode.c
@@ -62,8 +62,7 @@
{
struct coda_inode_info *ei = (struct coda_inode_info *) foo;
- if ((flags & (SLAB_CTOR_VERIFY|SLAB_CTOR_CONSTRUCTOR)) ==
- SLAB_CTOR_CONSTRUCTOR)
+ if (flags & SLAB_CTOR_CONSTRUCTOR)
inode_init_once(&ei->vfs_inode);
}
diff --git a/fs/cramfs/inode.c b/fs/cramfs/inode.c
index facd0c8..3d194a2 100644
--- a/fs/cramfs/inode.c
+++ b/fs/cramfs/inode.c
@@ -180,7 +180,8 @@
struct page *page = NULL;
if (blocknr + i < devsize) {
- page = read_mapping_page(mapping, blocknr + i, NULL);
+ page = read_mapping_page_async(mapping, blocknr + i,
+ NULL);
/* synchronous error? */
if (IS_ERR(page))
page = NULL;
diff --git a/fs/dcache.c b/fs/dcache.c
index d68631f..d1bf5d8 100644
--- a/fs/dcache.c
+++ b/fs/dcache.c
@@ -2052,12 +2052,8 @@
* but it is probably not worth it because of the cache nature
* of the dcache.
*/
- dentry_cache = kmem_cache_create("dentry_cache",
- sizeof(struct dentry),
- 0,
- (SLAB_RECLAIM_ACCOUNT|SLAB_PANIC|
- SLAB_MEM_SPREAD),
- NULL, NULL);
+ dentry_cache = KMEM_CACHE(dentry,
+ SLAB_RECLAIM_ACCOUNT|SLAB_PANIC|SLAB_MEM_SPREAD);
set_shrinker(DEFAULT_SEEKS, shrink_dcache_memory);
diff --git a/fs/dquot.c b/fs/dquot.c
index b16f991..0a5febc 100644
--- a/fs/dquot.c
+++ b/fs/dquot.c
@@ -1432,7 +1432,7 @@
mutex_unlock(&dqopt->dqonoff_mutex);
}
if (sb->s_bdev)
- invalidate_bdev(sb->s_bdev, 0);
+ invalidate_bdev(sb->s_bdev);
return 0;
}
@@ -1468,7 +1468,7 @@
* we see all the changes from userspace... */
write_inode_now(inode, 1);
/* And now flush the block cache so that kernel sees the changes */
- invalidate_bdev(sb->s_bdev, 0);
+ invalidate_bdev(sb->s_bdev);
mutex_lock(&inode->i_mutex);
mutex_lock(&dqopt->dqonoff_mutex);
if (sb_has_quota_enabled(sb, type)) {
diff --git a/fs/ecryptfs/main.c b/fs/ecryptfs/main.c
index 6acc8f4..8cbf3f6 100644
--- a/fs/ecryptfs/main.c
+++ b/fs/ecryptfs/main.c
@@ -583,8 +583,7 @@
{
struct ecryptfs_inode_info *ei = (struct ecryptfs_inode_info *)vptr;
- if ((flags & (SLAB_CTOR_VERIFY | SLAB_CTOR_CONSTRUCTOR)) ==
- SLAB_CTOR_CONSTRUCTOR)
+ if (flags & SLAB_CTOR_CONSTRUCTOR)
inode_init_once(&ei->vfs_inode);
}
diff --git a/fs/ecryptfs/mmap.c b/fs/ecryptfs/mmap.c
index b731b09..0770c4b 100644
--- a/fs/ecryptfs/mmap.c
+++ b/fs/ecryptfs/mmap.c
@@ -46,7 +46,6 @@
*/
static struct page *ecryptfs_get1page(struct file *file, int index)
{
- struct page *page;
struct dentry *dentry;
struct inode *inode;
struct address_space *mapping;
@@ -54,14 +53,7 @@
dentry = file->f_path.dentry;
inode = dentry->d_inode;
mapping = inode->i_mapping;
- page = read_cache_page(mapping, index,
- (filler_t *)mapping->a_ops->readpage,
- (void *)file);
- if (IS_ERR(page))
- goto out;
- wait_on_page_locked(page);
-out:
- return page;
+ return read_mapping_page(mapping, index, (void *)file);
}
static
@@ -233,7 +225,6 @@
ecryptfs_printk(KERN_ERR, "Error reading from page cache\n");
goto out;
}
- wait_on_page_locked(lower_page);
page_data = kmap_atomic(page, KM_USER0);
lower_page_data = kmap_atomic(lower_page, KM_USER1);
memcpy(page_data, lower_page_data, PAGE_CACHE_SIZE);
diff --git a/fs/efs/super.c b/fs/efs/super.c
index c2235e4..ba7a8b9 100644
--- a/fs/efs/super.c
+++ b/fs/efs/super.c
@@ -72,8 +72,7 @@
{
struct efs_inode_info *ei = (struct efs_inode_info *) foo;
- if ((flags & (SLAB_CTOR_VERIFY|SLAB_CTOR_CONSTRUCTOR)) ==
- SLAB_CTOR_CONSTRUCTOR)
+ if (flags & SLAB_CTOR_CONSTRUCTOR)
inode_init_once(&ei->vfs_inode);
}
diff --git a/fs/ext2/dir.c b/fs/ext2/dir.c
index e89bfc8..1d1e7e30 100644
--- a/fs/ext2/dir.c
+++ b/fs/ext2/dir.c
@@ -161,10 +161,7 @@
struct address_space *mapping = dir->i_mapping;
struct page *page = read_mapping_page(mapping, n, NULL);
if (!IS_ERR(page)) {
- wait_on_page_locked(page);
kmap(page);
- if (!PageUptodate(page))
- goto fail;
if (!PageChecked(page))
ext2_check_page(page);
if (PageError(page))
diff --git a/fs/ext2/super.c b/fs/ext2/super.c
index a046a41..685a1c2 100644
--- a/fs/ext2/super.c
+++ b/fs/ext2/super.c
@@ -160,8 +160,7 @@
{
struct ext2_inode_info *ei = (struct ext2_inode_info *) foo;
- if ((flags & (SLAB_CTOR_VERIFY|SLAB_CTOR_CONSTRUCTOR)) ==
- SLAB_CTOR_CONSTRUCTOR) {
+ if (flags & SLAB_CTOR_CONSTRUCTOR) {
rwlock_init(&ei->i_meta_lock);
#ifdef CONFIG_EXT2_FS_XATTR
init_rwsem(&ei->xattr_sem);
diff --git a/fs/ext3/super.c b/fs/ext3/super.c
index 4a4fcd6..54d3c90 100644
--- a/fs/ext3/super.c
+++ b/fs/ext3/super.c
@@ -420,7 +420,7 @@
dump_orphan_list(sb, sbi);
J_ASSERT(list_empty(&sbi->s_orphan));
- invalidate_bdev(sb->s_bdev, 0);
+ invalidate_bdev(sb->s_bdev);
if (sbi->journal_bdev && sbi->journal_bdev != sb->s_bdev) {
/*
* Invalidate the journal device's buffers. We don't want them
@@ -428,7 +428,7 @@
* hotswapped, and it breaks the `ro-after' testing code.
*/
sync_blockdev(sbi->journal_bdev);
- invalidate_bdev(sbi->journal_bdev, 0);
+ invalidate_bdev(sbi->journal_bdev);
ext3_blkdev_remove(sbi);
}
sb->s_fs_info = NULL;
@@ -466,8 +466,7 @@
{
struct ext3_inode_info *ei = (struct ext3_inode_info *) foo;
- if ((flags & (SLAB_CTOR_VERIFY|SLAB_CTOR_CONSTRUCTOR)) ==
- SLAB_CTOR_CONSTRUCTOR) {
+ if (flags & SLAB_CTOR_CONSTRUCTOR) {
INIT_LIST_HEAD(&ei->i_orphan);
#ifdef CONFIG_EXT3_FS_XATTR
init_rwsem(&ei->xattr_sem);
diff --git a/fs/ext4/super.c b/fs/ext4/super.c
index 61c4718..7191269 100644
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -470,7 +470,7 @@
dump_orphan_list(sb, sbi);
J_ASSERT(list_empty(&sbi->s_orphan));
- invalidate_bdev(sb->s_bdev, 0);
+ invalidate_bdev(sb->s_bdev);
if (sbi->journal_bdev && sbi->journal_bdev != sb->s_bdev) {
/*
* Invalidate the journal device's buffers. We don't want them
@@ -478,7 +478,7 @@
* hotswapped, and it breaks the `ro-after' testing code.
*/
sync_blockdev(sbi->journal_bdev);
- invalidate_bdev(sbi->journal_bdev, 0);
+ invalidate_bdev(sbi->journal_bdev);
ext4_blkdev_remove(sbi);
}
sb->s_fs_info = NULL;
@@ -517,8 +517,7 @@
{
struct ext4_inode_info *ei = (struct ext4_inode_info *) foo;
- if ((flags & (SLAB_CTOR_VERIFY|SLAB_CTOR_CONSTRUCTOR)) ==
- SLAB_CTOR_CONSTRUCTOR) {
+ if (flags & SLAB_CTOR_CONSTRUCTOR) {
INIT_LIST_HEAD(&ei->i_orphan);
#ifdef CONFIG_EXT4DEV_FS_XATTR
init_rwsem(&ei->xattr_sem);
diff --git a/fs/fat/cache.c b/fs/fat/cache.c
index 05c2941..1959143 100644
--- a/fs/fat/cache.c
+++ b/fs/fat/cache.c
@@ -40,8 +40,7 @@
{
struct fat_cache *cache = (struct fat_cache *)foo;
- if ((flags & (SLAB_CTOR_VERIFY|SLAB_CTOR_CONSTRUCTOR)) ==
- SLAB_CTOR_CONSTRUCTOR)
+ if (flags & SLAB_CTOR_CONSTRUCTOR)
INIT_LIST_HEAD(&cache->cache_list);
}
diff --git a/fs/fat/inode.c b/fs/fat/inode.c
index 9bfe607..65cb54b 100644
--- a/fs/fat/inode.c
+++ b/fs/fat/inode.c
@@ -499,8 +499,7 @@
{
struct msdos_inode_info *ei = (struct msdos_inode_info *)foo;
- if ((flags & (SLAB_CTOR_VERIFY|SLAB_CTOR_CONSTRUCTOR)) ==
- SLAB_CTOR_CONSTRUCTOR) {
+ if (flags & SLAB_CTOR_CONSTRUCTOR) {
spin_lock_init(&ei->cache_lru_lock);
ei->nr_caches = 0;
ei->cache_valid_id = FAT_CACHE_VALID + 1;
diff --git a/fs/freevxfs/vxfs_subr.c b/fs/freevxfs/vxfs_subr.c
index decac62..ed8f0b0 100644
--- a/fs/freevxfs/vxfs_subr.c
+++ b/fs/freevxfs/vxfs_subr.c
@@ -74,10 +74,7 @@
pp = read_mapping_page(mapping, n, NULL);
if (!IS_ERR(pp)) {
- wait_on_page_locked(pp);
kmap(pp);
- if (!PageUptodate(pp))
- goto fail;
/** if (!PageChecked(pp)) **/
/** vxfs_check_page(pp); **/
if (PageError(pp))
diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c
index bdffe0c..d8003be 100644
--- a/fs/fuse/inode.c
+++ b/fs/fuse/inode.c
@@ -685,8 +685,7 @@
{
struct inode * inode = foo;
- if ((flags & (SLAB_CTOR_VERIFY|SLAB_CTOR_CONSTRUCTOR)) ==
- SLAB_CTOR_CONSTRUCTOR)
+ if (flags & SLAB_CTOR_CONSTRUCTOR)
inode_init_once(inode);
}
diff --git a/fs/gfs2/main.c b/fs/gfs2/main.c
index 6e8a598..e2bffae 100644
--- a/fs/gfs2/main.c
+++ b/fs/gfs2/main.c
@@ -27,8 +27,7 @@
static void gfs2_init_inode_once(void *foo, struct kmem_cache *cachep, unsigned long flags)
{
struct gfs2_inode *ip = foo;
- if ((flags & (SLAB_CTOR_VERIFY|SLAB_CTOR_CONSTRUCTOR)) ==
- SLAB_CTOR_CONSTRUCTOR) {
+ if (flags & SLAB_CTOR_CONSTRUCTOR) {
inode_init_once(&ip->i_inode);
spin_lock_init(&ip->i_spin);
init_rwsem(&ip->i_rw_mutex);
@@ -39,8 +38,7 @@
static void gfs2_init_glock_once(void *foo, struct kmem_cache *cachep, unsigned long flags)
{
struct gfs2_glock *gl = foo;
- if ((flags & (SLAB_CTOR_VERIFY|SLAB_CTOR_CONSTRUCTOR)) ==
- SLAB_CTOR_CONSTRUCTOR) {
+ if (flags & SLAB_CTOR_CONSTRUCTOR) {
INIT_HLIST_NODE(&gl->gl_list);
spin_lock_init(&gl->gl_spin);
INIT_LIST_HEAD(&gl->gl_holders);
diff --git a/fs/hfs/super.c b/fs/hfs/super.c
index 623f509..4f1888f 100644
--- a/fs/hfs/super.c
+++ b/fs/hfs/super.c
@@ -434,7 +434,7 @@
{
struct hfs_inode_info *i = p;
- if ((flags & (SLAB_CTOR_VERIFY|SLAB_CTOR_CONSTRUCTOR)) == SLAB_CTOR_CONSTRUCTOR)
+ if (flags & SLAB_CTOR_CONSTRUCTOR)
inode_init_once(&i->vfs_inode);
}
diff --git a/fs/hfsplus/super.c b/fs/hfsplus/super.c
index 1a97f92..37afbec 100644
--- a/fs/hfsplus/super.c
+++ b/fs/hfsplus/super.c
@@ -470,7 +470,7 @@
{
struct hfsplus_inode_info *i = p;
- if ((flags & (SLAB_CTOR_VERIFY|SLAB_CTOR_CONSTRUCTOR)) == SLAB_CTOR_CONSTRUCTOR)
+ if (flags & SLAB_CTOR_CONSTRUCTOR)
inode_init_once(&i->vfs_inode);
}
diff --git a/fs/hpfs/super.c b/fs/hpfs/super.c
index e0174e3..1b95f39f 100644
--- a/fs/hpfs/super.c
+++ b/fs/hpfs/super.c
@@ -176,8 +176,7 @@
{
struct hpfs_inode_info *ei = (struct hpfs_inode_info *) foo;
- if ((flags & (SLAB_CTOR_VERIFY|SLAB_CTOR_CONSTRUCTOR)) ==
- SLAB_CTOR_CONSTRUCTOR) {
+ if (flags & SLAB_CTOR_CONSTRUCTOR) {
mutex_init(&ei->i_mutex);
mutex_init(&ei->i_parent_mutex);
inode_init_once(&ei->vfs_inode);
diff --git a/fs/hugetlbfs/inode.c b/fs/hugetlbfs/inode.c
index 8c718a3..98959b8 100644
--- a/fs/hugetlbfs/inode.c
+++ b/fs/hugetlbfs/inode.c
@@ -22,6 +22,7 @@
#include <linux/backing-dev.h>
#include <linux/hugetlb.h>
#include <linux/pagevec.h>
+#include <linux/mman.h>
#include <linux/quotaops.h>
#include <linux/slab.h>
#include <linux/dnotify.h>
@@ -98,10 +99,7 @@
* Called under down_write(mmap_sem).
*/
-#ifdef HAVE_ARCH_HUGETLB_UNMAPPED_AREA
-unsigned long hugetlb_get_unmapped_area(struct file *file, unsigned long addr,
- unsigned long len, unsigned long pgoff, unsigned long flags);
-#else
+#ifndef HAVE_ARCH_HUGETLB_UNMAPPED_AREA
static unsigned long
hugetlb_get_unmapped_area(struct file *file, unsigned long addr,
unsigned long len, unsigned long pgoff, unsigned long flags)
@@ -115,6 +113,12 @@
if (len > TASK_SIZE)
return -ENOMEM;
+ if (flags & MAP_FIXED) {
+ if (prepare_hugepage_range(addr, len, pgoff))
+ return -EINVAL;
+ return addr;
+ }
+
if (addr) {
addr = ALIGN(addr, HPAGE_SIZE);
vma = find_vma(mm, addr);
@@ -453,7 +457,7 @@
*/
static int hugetlbfs_set_page_dirty(struct page *page)
{
- struct page *head = (struct page *)page_private(page);
+ struct page *head = compound_head(page);
SetPageDirty(head);
return 0;
@@ -552,8 +556,7 @@
{
struct hugetlbfs_inode_info *ei = (struct hugetlbfs_inode_info *)foo;
- if ((flags & (SLAB_CTOR_VERIFY|SLAB_CTOR_CONSTRUCTOR)) ==
- SLAB_CTOR_CONSTRUCTOR)
+ if (flags & SLAB_CTOR_CONSTRUCTOR)
inode_init_once(&ei->vfs_inode);
}
@@ -744,6 +747,9 @@
char buf[16];
static atomic_t counter;
+ if (!hugetlbfs_vfsmount)
+ return ERR_PTR(-ENOENT);
+
if (!can_do_hugetlb_shm())
return ERR_PTR(-EPERM);
diff --git a/fs/inode.c b/fs/inode.c
index 5abb097..b4296bf 100644
--- a/fs/inode.c
+++ b/fs/inode.c
@@ -213,8 +213,7 @@
{
struct inode * inode = (struct inode *) foo;
- if ((flags & (SLAB_CTOR_VERIFY|SLAB_CTOR_CONSTRUCTOR)) ==
- SLAB_CTOR_CONSTRUCTOR)
+ if (flags & SLAB_CTOR_CONSTRUCTOR)
inode_init_once(inode);
}
diff --git a/fs/isofs/inode.c b/fs/isofs/inode.c
index 64a96cd..e99f7ff 100644
--- a/fs/isofs/inode.c
+++ b/fs/isofs/inode.c
@@ -77,8 +77,7 @@
{
struct iso_inode_info *ei = foo;
- if ((flags & (SLAB_CTOR_VERIFY|SLAB_CTOR_CONSTRUCTOR)) ==
- SLAB_CTOR_CONSTRUCTOR)
+ if (flags & SLAB_CTOR_CONSTRUCTOR)
inode_init_once(&ei->vfs_inode);
}
diff --git a/fs/jffs2/super.c b/fs/jffs2/super.c
index e51164a..45368f8 100644
--- a/fs/jffs2/super.c
+++ b/fs/jffs2/super.c
@@ -47,8 +47,7 @@
{
struct jffs2_inode_info *ei = (struct jffs2_inode_info *) foo;
- if ((flags & (SLAB_CTOR_VERIFY|SLAB_CTOR_CONSTRUCTOR)) ==
- SLAB_CTOR_CONSTRUCTOR) {
+ if (flags & SLAB_CTOR_CONSTRUCTOR) {
init_MUTEX(&ei->sem);
inode_init_once(&ei->vfs_inode);
}
diff --git a/fs/jfs/jfs_metapage.c b/fs/jfs/jfs_metapage.c
index 58deae0..6b3acb0 100644
--- a/fs/jfs/jfs_metapage.c
+++ b/fs/jfs/jfs_metapage.c
@@ -184,8 +184,7 @@
{
struct metapage *mp = (struct metapage *)foo;
- if ((flags & (SLAB_CTOR_VERIFY|SLAB_CTOR_CONSTRUCTOR)) ==
- SLAB_CTOR_CONSTRUCTOR) {
+ if (flags & SLAB_CTOR_CONSTRUCTOR) {
mp->lid = 0;
mp->lsn = 0;
mp->flag = 0;
diff --git a/fs/jfs/super.c b/fs/jfs/super.c
index 52d73d5..ea9dc3e 100644
--- a/fs/jfs/super.c
+++ b/fs/jfs/super.c
@@ -752,8 +752,7 @@
{
struct jfs_inode_info *jfs_ip = (struct jfs_inode_info *) foo;
- if ((flags & (SLAB_CTOR_VERIFY | SLAB_CTOR_CONSTRUCTOR)) ==
- SLAB_CTOR_CONSTRUCTOR) {
+ if (flags & SLAB_CTOR_CONSTRUCTOR) {
memset(jfs_ip, 0, sizeof(struct jfs_inode_info));
INIT_LIST_HEAD(&jfs_ip->anon_inode_list);
init_rwsem(&jfs_ip->rdwrlock);
diff --git a/fs/locks.c b/fs/locks.c
index 52a8100..3255780 100644
--- a/fs/locks.c
+++ b/fs/locks.c
@@ -203,8 +203,7 @@
{
struct file_lock *lock = (struct file_lock *) foo;
- if ((flags & (SLAB_CTOR_VERIFY|SLAB_CTOR_CONSTRUCTOR)) !=
- SLAB_CTOR_CONSTRUCTOR)
+ if (!(flags & SLAB_CTOR_CONSTRUCTOR))
return;
locks_init_lock(lock);
diff --git a/fs/minix/dir.c b/fs/minix/dir.c
index cb4cb57..e207cbe7 100644
--- a/fs/minix/dir.c
+++ b/fs/minix/dir.c
@@ -65,7 +65,6 @@
struct address_space *mapping = dir->i_mapping;
struct page *page = read_mapping_page(mapping, n, NULL);
if (!IS_ERR(page)) {
- wait_on_page_locked(page);
kmap(page);
if (!PageUptodate(page))
goto fail;
diff --git a/fs/minix/inode.c b/fs/minix/inode.c
index 92e383a..2f4d43a 100644
--- a/fs/minix/inode.c
+++ b/fs/minix/inode.c
@@ -73,8 +73,7 @@
{
struct minix_inode_info *ei = (struct minix_inode_info *) foo;
- if ((flags & (SLAB_CTOR_VERIFY|SLAB_CTOR_CONSTRUCTOR)) ==
- SLAB_CTOR_CONSTRUCTOR)
+ if (flags & SLAB_CTOR_CONSTRUCTOR)
inode_init_once(&ei->vfs_inode);
}
diff --git a/fs/namei.c b/fs/namei.c
index 880052c..94b2f60 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -2671,19 +2671,9 @@
struct address_space *mapping = dentry->d_inode->i_mapping;
page = read_mapping_page(mapping, 0, NULL);
if (IS_ERR(page))
- goto sync_fail;
- wait_on_page_locked(page);
- if (!PageUptodate(page))
- goto async_fail;
+ return (char*)page;
*ppage = page;
return kmap(page);
-
-async_fail:
- page_cache_release(page);
- return ERR_PTR(-EIO);
-
-sync_fail:
- return (char*)page;
}
int page_readlink(struct dentry *dentry, char __user *buffer, int buflen)
diff --git a/fs/ncpfs/inode.c b/fs/ncpfs/inode.c
index 7285c94..c29f00a 100644
--- a/fs/ncpfs/inode.c
+++ b/fs/ncpfs/inode.c
@@ -60,8 +60,7 @@
{
struct ncp_inode_info *ei = (struct ncp_inode_info *) foo;
- if ((flags & (SLAB_CTOR_VERIFY|SLAB_CTOR_CONSTRUCTOR)) ==
- SLAB_CTOR_CONSTRUCTOR) {
+ if (flags & SLAB_CTOR_CONSTRUCTOR) {
mutex_init(&ei->open_mutex);
inode_init_once(&ei->vfs_inode);
}
diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c
index e59fd31..625d8e5 100644
--- a/fs/nfs/dir.c
+++ b/fs/nfs/dir.c
@@ -334,8 +334,6 @@
status = PTR_ERR(page);
goto out;
}
- if (!PageUptodate(page))
- goto read_error;
/* NOTE: Someone else may have changed the READDIRPLUS flag */
desc->page = page;
@@ -349,9 +347,6 @@
out:
dfprintk(DIRCACHE, "NFS: %s: returns %d\n", __FUNCTION__, status);
return status;
- read_error:
- page_cache_release(page);
- return -EIO;
}
/*
diff --git a/fs/nfs/inode.c b/fs/nfs/inode.c
index 44aa9b7..1e9a915 100644
--- a/fs/nfs/inode.c
+++ b/fs/nfs/inode.c
@@ -1167,8 +1167,7 @@
{
struct nfs_inode *nfsi = (struct nfs_inode *) foo;
- if ((flags & (SLAB_CTOR_VERIFY|SLAB_CTOR_CONSTRUCTOR)) ==
- SLAB_CTOR_CONSTRUCTOR) {
+ if (flags & SLAB_CTOR_CONSTRUCTOR) {
inode_init_once(&nfsi->vfs_inode);
spin_lock_init(&nfsi->req_lock);
INIT_LIST_HEAD(&nfsi->dirty);
diff --git a/fs/nfs/symlink.c b/fs/nfs/symlink.c
index f4a0548..bc28213 100644
--- a/fs/nfs/symlink.c
+++ b/fs/nfs/symlink.c
@@ -61,15 +61,9 @@
err = page;
goto read_failed;
}
- if (!PageUptodate(page)) {
- err = ERR_PTR(-EIO);
- goto getlink_read_error;
- }
nd_set_link(nd, kmap(page));
return page;
-getlink_read_error:
- page_cache_release(page);
read_failed:
nd_set_link(nd, err);
return NULL;
diff --git a/fs/ntfs/aops.h b/fs/ntfs/aops.h
index 9393f4b..caecc58 100644
--- a/fs/ntfs/aops.h
+++ b/fs/ntfs/aops.h
@@ -89,9 +89,8 @@
struct page *page = read_mapping_page(mapping, index, NULL);
if (!IS_ERR(page)) {
- wait_on_page_locked(page);
kmap(page);
- if (PageUptodate(page) && !PageError(page))
+ if (!PageError(page))
return page;
ntfs_unmap_page(page);
return ERR_PTR(-EIO);
diff --git a/fs/ntfs/attrib.c b/fs/ntfs/attrib.c
index 7659cc1..1c08fef 100644
--- a/fs/ntfs/attrib.c
+++ b/fs/ntfs/attrib.c
@@ -2532,14 +2532,7 @@
page = read_mapping_page(mapping, idx, NULL);
if (IS_ERR(page)) {
ntfs_error(vol->sb, "Failed to read first partial "
- "page (sync error, index 0x%lx).", idx);
- return PTR_ERR(page);
- }
- wait_on_page_locked(page);
- if (unlikely(!PageUptodate(page))) {
- ntfs_error(vol->sb, "Failed to read first partial page "
- "(async error, index 0x%lx).", idx);
- page_cache_release(page);
+ "page (error, index 0x%lx).", idx);
return PTR_ERR(page);
}
/*
@@ -2602,14 +2595,7 @@
page = read_mapping_page(mapping, idx, NULL);
if (IS_ERR(page)) {
ntfs_error(vol->sb, "Failed to read last partial page "
- "(sync error, index 0x%lx).", idx);
- return PTR_ERR(page);
- }
- wait_on_page_locked(page);
- if (unlikely(!PageUptodate(page))) {
- ntfs_error(vol->sb, "Failed to read last partial page "
- "(async error, index 0x%lx).", idx);
- page_cache_release(page);
+ "(error, index 0x%lx).", idx);
return PTR_ERR(page);
}
kaddr = kmap_atomic(page, KM_USER0);
diff --git a/fs/ntfs/file.c b/fs/ntfs/file.c
index d69c459..dbbac55 100644
--- a/fs/ntfs/file.c
+++ b/fs/ntfs/file.c
@@ -236,8 +236,7 @@
err = PTR_ERR(page);
goto init_err_out;
}
- wait_on_page_locked(page);
- if (unlikely(!PageUptodate(page) || PageError(page))) {
+ if (unlikely(PageError(page))) {
page_cache_release(page);
err = -EIO;
goto init_err_out;
diff --git a/fs/ntfs/super.c b/fs/ntfs/super.c
index 1594c90..21d834e 100644
--- a/fs/ntfs/super.c
+++ b/fs/ntfs/super.c
@@ -2471,7 +2471,6 @@
s64 nr_free = vol->nr_clusters;
u32 *kaddr;
struct address_space *mapping = vol->lcnbmp_ino->i_mapping;
- filler_t *readpage = (filler_t*)mapping->a_ops->readpage;
struct page *page;
pgoff_t index, max_index;
@@ -2494,24 +2493,14 @@
* Read the page from page cache, getting it from backing store
* if necessary, and increment the use count.
*/
- page = read_cache_page(mapping, index, (filler_t*)readpage,
- NULL);
+ page = read_mapping_page(mapping, index, NULL);
/* Ignore pages which errored synchronously. */
if (IS_ERR(page)) {
- ntfs_debug("Sync read_cache_page() error. Skipping "
+ ntfs_debug("read_mapping_page() error. Skipping "
"page (index 0x%lx).", index);
nr_free -= PAGE_CACHE_SIZE * 8;
continue;
}
- wait_on_page_locked(page);
- /* Ignore pages which errored asynchronously. */
- if (!PageUptodate(page)) {
- ntfs_debug("Async read_cache_page() error. Skipping "
- "page (index 0x%lx).", index);
- page_cache_release(page);
- nr_free -= PAGE_CACHE_SIZE * 8;
- continue;
- }
kaddr = (u32*)kmap_atomic(page, KM_USER0);
/*
* For each 4 bytes, subtract the number of set bits. If this
@@ -2562,7 +2551,6 @@
{
u32 *kaddr;
struct address_space *mapping = vol->mftbmp_ino->i_mapping;
- filler_t *readpage = (filler_t*)mapping->a_ops->readpage;
struct page *page;
pgoff_t index;
@@ -2576,24 +2564,14 @@
* Read the page from page cache, getting it from backing store
* if necessary, and increment the use count.
*/
- page = read_cache_page(mapping, index, (filler_t*)readpage,
- NULL);
+ page = read_mapping_page(mapping, index, NULL);
/* Ignore pages which errored synchronously. */
if (IS_ERR(page)) {
- ntfs_debug("Sync read_cache_page() error. Skipping "
+ ntfs_debug("read_mapping_page() error. Skipping "
"page (index 0x%lx).", index);
nr_free -= PAGE_CACHE_SIZE * 8;
continue;
}
- wait_on_page_locked(page);
- /* Ignore pages which errored asynchronously. */
- if (!PageUptodate(page)) {
- ntfs_debug("Async read_cache_page() error. Skipping "
- "page (index 0x%lx).", index);
- page_cache_release(page);
- nr_free -= PAGE_CACHE_SIZE * 8;
- continue;
- }
kaddr = (u32*)kmap_atomic(page, KM_USER0);
/*
* For each 4 bytes, subtract the number of set bits. If this
@@ -3107,8 +3085,7 @@
{
ntfs_inode *ni = (ntfs_inode *)foo;
- if ((flags & (SLAB_CTOR_VERIFY|SLAB_CTOR_CONSTRUCTOR)) ==
- SLAB_CTOR_CONSTRUCTOR)
+ if (flags & SLAB_CTOR_CONSTRUCTOR)
inode_init_once(VFS_I(ni));
}
diff --git a/fs/ocfs2/dlm/dlmfs.c b/fs/ocfs2/dlm/dlmfs.c
index de952eb..d4e46d0 100644
--- a/fs/ocfs2/dlm/dlmfs.c
+++ b/fs/ocfs2/dlm/dlmfs.c
@@ -263,8 +263,7 @@
struct dlmfs_inode_private *ip =
(struct dlmfs_inode_private *) foo;
- if ((flags & (SLAB_CTOR_VERIFY|SLAB_CTOR_CONSTRUCTOR)) ==
- SLAB_CTOR_CONSTRUCTOR) {
+ if (flags & SLAB_CTOR_CONSTRUCTOR) {
ip->ip_dlm = NULL;
ip->ip_parent = NULL;
diff --git a/fs/ocfs2/super.c b/fs/ocfs2/super.c
index f549354..7c5e3f5 100644
--- a/fs/ocfs2/super.c
+++ b/fs/ocfs2/super.c
@@ -937,8 +937,7 @@
{
struct ocfs2_inode_info *oi = data;
- if ((flags & (SLAB_CTOR_VERIFY|SLAB_CTOR_CONSTRUCTOR)) ==
- SLAB_CTOR_CONSTRUCTOR) {
+ if (flags & SLAB_CTOR_CONSTRUCTOR) {
oi->ip_flags = 0;
oi->ip_open_count = 0;
spin_lock_init(&oi->ip_lock);
diff --git a/fs/ocfs2/symlink.c b/fs/ocfs2/symlink.c
index 40dc1a51..7134007 100644
--- a/fs/ocfs2/symlink.c
+++ b/fs/ocfs2/symlink.c
@@ -67,16 +67,9 @@
page = read_mapping_page(mapping, 0, NULL);
if (IS_ERR(page))
goto sync_fail;
- wait_on_page_locked(page);
- if (!PageUptodate(page))
- goto async_fail;
*ppage = page;
return kmap(page);
-async_fail:
- page_cache_release(page);
- return ERR_PTR(-EIO);
-
sync_fail:
return (char*)page;
}
diff --git a/fs/openpromfs/inode.c b/fs/openpromfs/inode.c
index bde1c16..731a90e 100644
--- a/fs/openpromfs/inode.c
+++ b/fs/openpromfs/inode.c
@@ -419,8 +419,7 @@
{
struct op_inode_info *oi = (struct op_inode_info *) data;
- if ((flags & (SLAB_CTOR_VERIFY|SLAB_CTOR_CONSTRUCTOR)) ==
- SLAB_CTOR_CONSTRUCTOR)
+ if (flags & SLAB_CTOR_CONSTRUCTOR)
inode_init_once(&oi->vfs_inode);
}
diff --git a/fs/partitions/acorn.c b/fs/partitions/acorn.c
index 1bc9f37..e349132 100644
--- a/fs/partitions/acorn.c
+++ b/fs/partitions/acorn.c
@@ -271,7 +271,7 @@
extern void xd_set_geometry(struct block_device *,
unsigned char, unsigned char, unsigned int);
xd_set_geometry(bdev, dr->secspertrack, heads, 1);
- invalidate_bdev(bdev, 1);
+ invalidate_bh_lrus();
truncate_inode_pages(bdev->bd_inode->i_mapping, 0);
}
#endif
diff --git a/fs/partitions/check.c b/fs/partitions/check.c
index f01572f..6b9dae3 100644
--- a/fs/partitions/check.c
+++ b/fs/partitions/check.c
@@ -569,9 +569,6 @@
page = read_mapping_page(mapping, (pgoff_t)(n >> (PAGE_CACHE_SHIFT-9)),
NULL);
if (!IS_ERR(page)) {
- wait_on_page_locked(page);
- if (!PageUptodate(page))
- goto fail;
if (PageError(page))
goto fail;
p->v = page;
diff --git a/fs/proc/base.c b/fs/proc/base.c
index 989af5e..ec158dd 100644
--- a/fs/proc/base.c
+++ b/fs/proc/base.c
@@ -715,6 +715,40 @@
.write = oom_adjust_write,
};
+static ssize_t clear_refs_write(struct file *file, const char __user *buf,
+ size_t count, loff_t *ppos)
+{
+ struct task_struct *task;
+ char buffer[PROC_NUMBUF], *end;
+ struct mm_struct *mm;
+
+ memset(buffer, 0, sizeof(buffer));
+ if (count > sizeof(buffer) - 1)
+ count = sizeof(buffer) - 1;
+ if (copy_from_user(buffer, buf, count))
+ return -EFAULT;
+ if (!simple_strtol(buffer, &end, 0))
+ return -EINVAL;
+ if (*end == '\n')
+ end++;
+ task = get_proc_task(file->f_path.dentry->d_inode);
+ if (!task)
+ return -ESRCH;
+ mm = get_task_mm(task);
+ if (mm) {
+ clear_refs_smap(mm);
+ mmput(mm);
+ }
+ put_task_struct(task);
+ if (end - buffer == 0)
+ return -EIO;
+ return end - buffer;
+}
+
+static struct file_operations proc_clear_refs_operations = {
+ .write = clear_refs_write,
+};
+
#ifdef CONFIG_AUDITSYSCALL
#define TMPBUFLEN 21
static ssize_t proc_loginuid_read(struct file * file, char __user * buf,
@@ -1851,6 +1885,7 @@
REG("mounts", S_IRUGO, mounts),
REG("mountstats", S_IRUSR, mountstats),
#ifdef CONFIG_MMU
+ REG("clear_refs", S_IWUSR, clear_refs),
REG("smaps", S_IRUGO, smaps),
#endif
#ifdef CONFIG_SECURITY
@@ -2132,6 +2167,7 @@
LNK("exe", exe),
REG("mounts", S_IRUGO, mounts),
#ifdef CONFIG_MMU
+ REG("clear_refs", S_IWUSR, clear_refs),
REG("smaps", S_IRUGO, smaps),
#endif
#ifdef CONFIG_SECURITY
diff --git a/fs/proc/inode.c b/fs/proc/inode.c
index c372eb15..22b1158 100644
--- a/fs/proc/inode.c
+++ b/fs/proc/inode.c
@@ -109,8 +109,7 @@
{
struct proc_inode *ei = (struct proc_inode *) foo;
- if ((flags & (SLAB_CTOR_VERIFY|SLAB_CTOR_CONSTRUCTOR)) ==
- SLAB_CTOR_CONSTRUCTOR)
+ if (flags & SLAB_CTOR_CONSTRUCTOR)
inode_init_once(&ei->vfs_inode);
}
diff --git a/fs/proc/proc_misc.c b/fs/proc/proc_misc.c
index e2c4c0a5..75ec652 100644
--- a/fs/proc/proc_misc.c
+++ b/fs/proc/proc_misc.c
@@ -398,8 +398,6 @@
#endif
#ifdef CONFIG_SLAB
-extern struct seq_operations slabinfo_op;
-extern ssize_t slabinfo_write(struct file *, const char __user *, size_t, loff_t *);
static int slabinfo_open(struct inode *inode, struct file *file)
{
return seq_open(file, &slabinfo_op);
diff --git a/fs/proc/task_mmu.c b/fs/proc/task_mmu.c
index 7445980..4008c06 100644
--- a/fs/proc/task_mmu.c
+++ b/fs/proc/task_mmu.c
@@ -120,6 +120,14 @@
unsigned long shared_dirty;
unsigned long private_clean;
unsigned long private_dirty;
+ unsigned long referenced;
+};
+
+struct pmd_walker {
+ struct vm_area_struct *vma;
+ void *private;
+ void (*action)(struct vm_area_struct *, pmd_t *, unsigned long,
+ unsigned long, void *);
};
static int show_map_internal(struct seq_file *m, void *v, struct mem_size_stats *mss)
@@ -181,18 +189,20 @@
if (mss)
seq_printf(m,
- "Size: %8lu kB\n"
- "Rss: %8lu kB\n"
- "Shared_Clean: %8lu kB\n"
- "Shared_Dirty: %8lu kB\n"
- "Private_Clean: %8lu kB\n"
- "Private_Dirty: %8lu kB\n",
+ "Size: %8lu kB\n"
+ "Rss: %8lu kB\n"
+ "Shared_Clean: %8lu kB\n"
+ "Shared_Dirty: %8lu kB\n"
+ "Private_Clean: %8lu kB\n"
+ "Private_Dirty: %8lu kB\n"
+ "Referenced: %8lu kB\n",
(vma->vm_end - vma->vm_start) >> 10,
mss->resident >> 10,
mss->shared_clean >> 10,
mss->shared_dirty >> 10,
mss->private_clean >> 10,
- mss->private_dirty >> 10);
+ mss->private_dirty >> 10,
+ mss->referenced >> 10);
if (m->count < m->size) /* vma is copied successfully */
m->version = (vma != get_gate_vma(task))? vma->vm_start: 0;
@@ -205,15 +215,16 @@
}
static void smaps_pte_range(struct vm_area_struct *vma, pmd_t *pmd,
- unsigned long addr, unsigned long end,
- struct mem_size_stats *mss)
+ unsigned long addr, unsigned long end,
+ void *private)
{
+ struct mem_size_stats *mss = private;
pte_t *pte, ptent;
spinlock_t *ptl;
struct page *page;
pte = pte_offset_map_lock(vma->vm_mm, pmd, addr, &ptl);
- do {
+ for (; addr != end; pte++, addr += PAGE_SIZE) {
ptent = *pte;
if (!pte_present(ptent))
continue;
@@ -224,6 +235,9 @@
if (!page)
continue;
+ /* Accumulate the size in pages that have been accessed. */
+ if (pte_young(ptent) || PageReferenced(page))
+ mss->referenced += PAGE_SIZE;
if (page_mapcount(page) >= 2) {
if (pte_dirty(ptent))
mss->shared_dirty += PAGE_SIZE;
@@ -235,57 +249,99 @@
else
mss->private_clean += PAGE_SIZE;
}
- } while (pte++, addr += PAGE_SIZE, addr != end);
+ }
pte_unmap_unlock(pte - 1, ptl);
cond_resched();
}
-static inline void smaps_pmd_range(struct vm_area_struct *vma, pud_t *pud,
- unsigned long addr, unsigned long end,
- struct mem_size_stats *mss)
+static void clear_refs_pte_range(struct vm_area_struct *vma, pmd_t *pmd,
+ unsigned long addr, unsigned long end,
+ void *private)
+{
+ pte_t *pte, ptent;
+ spinlock_t *ptl;
+ struct page *page;
+
+ pte = pte_offset_map_lock(vma->vm_mm, pmd, addr, &ptl);
+ for (; addr != end; pte++, addr += PAGE_SIZE) {
+ ptent = *pte;
+ if (!pte_present(ptent))
+ continue;
+
+ page = vm_normal_page(vma, addr, ptent);
+ if (!page)
+ continue;
+
+ /* Clear accessed and referenced bits. */
+ ptep_test_and_clear_young(vma, addr, pte);
+ ClearPageReferenced(page);
+ }
+ pte_unmap_unlock(pte - 1, ptl);
+ cond_resched();
+}
+
+static inline void walk_pmd_range(struct pmd_walker *walker, pud_t *pud,
+ unsigned long addr, unsigned long end)
{
pmd_t *pmd;
unsigned long next;
- pmd = pmd_offset(pud, addr);
- do {
+ for (pmd = pmd_offset(pud, addr); addr != end;
+ pmd++, addr = next) {
next = pmd_addr_end(addr, end);
if (pmd_none_or_clear_bad(pmd))
continue;
- smaps_pte_range(vma, pmd, addr, next, mss);
- } while (pmd++, addr = next, addr != end);
+ walker->action(walker->vma, pmd, addr, next, walker->private);
+ }
}
-static inline void smaps_pud_range(struct vm_area_struct *vma, pgd_t *pgd,
- unsigned long addr, unsigned long end,
- struct mem_size_stats *mss)
+static inline void walk_pud_range(struct pmd_walker *walker, pgd_t *pgd,
+ unsigned long addr, unsigned long end)
{
pud_t *pud;
unsigned long next;
- pud = pud_offset(pgd, addr);
- do {
+ for (pud = pud_offset(pgd, addr); addr != end;
+ pud++, addr = next) {
next = pud_addr_end(addr, end);
if (pud_none_or_clear_bad(pud))
continue;
- smaps_pmd_range(vma, pud, addr, next, mss);
- } while (pud++, addr = next, addr != end);
+ walk_pmd_range(walker, pud, addr, next);
+ }
}
-static inline void smaps_pgd_range(struct vm_area_struct *vma,
- unsigned long addr, unsigned long end,
- struct mem_size_stats *mss)
+/*
+ * walk_page_range - walk the page tables of a VMA with a callback
+ * @vma - VMA to walk
+ * @action - callback invoked for every bottom-level (PTE) page table
+ * @private - private data passed to the callback function
+ *
+ * Recursively walk the page table for the memory area in a VMA, calling
+ * a callback for every bottom-level (PTE) page table.
+ */
+static inline void walk_page_range(struct vm_area_struct *vma,
+ void (*action)(struct vm_area_struct *,
+ pmd_t *, unsigned long,
+ unsigned long, void *),
+ void *private)
{
+ unsigned long addr = vma->vm_start;
+ unsigned long end = vma->vm_end;
+ struct pmd_walker walker = {
+ .vma = vma,
+ .private = private,
+ .action = action,
+ };
pgd_t *pgd;
unsigned long next;
- pgd = pgd_offset(vma->vm_mm, addr);
- do {
+ for (pgd = pgd_offset(vma->vm_mm, addr); addr != end;
+ pgd++, addr = next) {
next = pgd_addr_end(addr, end);
if (pgd_none_or_clear_bad(pgd))
continue;
- smaps_pud_range(vma, pgd, addr, next, mss);
- } while (pgd++, addr = next, addr != end);
+ walk_pud_range(&walker, pgd, addr, next);
+ }
}
static int show_smap(struct seq_file *m, void *v)
@@ -295,10 +351,22 @@
memset(&mss, 0, sizeof mss);
if (vma->vm_mm && !is_vm_hugetlb_page(vma))
- smaps_pgd_range(vma, vma->vm_start, vma->vm_end, &mss);
+ walk_page_range(vma, smaps_pte_range, &mss);
return show_map_internal(m, v, &mss);
}
+void clear_refs_smap(struct mm_struct *mm)
+{
+ struct vm_area_struct *vma;
+
+ down_read(&mm->mmap_sem);
+ for (vma = mm->mmap; vma; vma = vma->vm_next)
+ if (vma->vm_mm && !is_vm_hugetlb_page(vma))
+ walk_page_range(vma, clear_refs_pte_range, NULL);
+ flush_tlb_mm(mm);
+ up_read(&mm->mmap_sem);
+}
+
static void *m_start(struct seq_file *m, loff_t *pos)
{
struct proc_maps_private *priv = m->private;
diff --git a/fs/qnx4/inode.c b/fs/qnx4/inode.c
index 83bc8e7..75fc849 100644
--- a/fs/qnx4/inode.c
+++ b/fs/qnx4/inode.c
@@ -536,8 +536,7 @@
{
struct qnx4_inode_info *ei = (struct qnx4_inode_info *) foo;
- if ((flags & (SLAB_CTOR_VERIFY | SLAB_CTOR_CONSTRUCTOR)) ==
- SLAB_CTOR_CONSTRUCTOR)
+ if (flags & SLAB_CTOR_CONSTRUCTOR)
inode_init_once(&ei->vfs_inode);
}
diff --git a/fs/reiserfs/super.c b/fs/reiserfs/super.c
index f13a7f1..7054aae 100644
--- a/fs/reiserfs/super.c
+++ b/fs/reiserfs/super.c
@@ -511,8 +511,7 @@
{
struct reiserfs_inode_info *ei = (struct reiserfs_inode_info *)foo;
- if ((flags & (SLAB_CTOR_VERIFY | SLAB_CTOR_CONSTRUCTOR)) ==
- SLAB_CTOR_CONSTRUCTOR) {
+ if (flags & SLAB_CTOR_CONSTRUCTOR) {
INIT_LIST_HEAD(&ei->i_prealloc_list);
inode_init_once(&ei->vfs_inode);
#ifdef CONFIG_REISERFS_FS_POSIX_ACL
diff --git a/fs/reiserfs/xattr.c b/fs/reiserfs/xattr.c
index 2cac562..bf6e582 100644
--- a/fs/reiserfs/xattr.c
+++ b/fs/reiserfs/xattr.c
@@ -410,11 +410,7 @@
mapping_set_gfp_mask(mapping, GFP_NOFS);
page = read_mapping_page(mapping, n, NULL);
if (!IS_ERR(page)) {
- wait_on_page_locked(page);
kmap(page);
- if (!PageUptodate(page))
- goto fail;
-
if (PageError(page))
goto fail;
}
diff --git a/fs/romfs/inode.c b/fs/romfs/inode.c
index fd60101..8042851 100644
--- a/fs/romfs/inode.c
+++ b/fs/romfs/inode.c
@@ -570,8 +570,7 @@
{
struct romfs_inode_info *ei = (struct romfs_inode_info *) foo;
- if ((flags & (SLAB_CTOR_VERIFY|SLAB_CTOR_CONSTRUCTOR)) ==
- SLAB_CTOR_CONSTRUCTOR)
+ if (flags & SLAB_CTOR_CONSTRUCTOR)
inode_init_once(&ei->vfs_inode);
}
diff --git a/fs/smbfs/inode.c b/fs/smbfs/inode.c
index 5faba4f..424a3dd 100644
--- a/fs/smbfs/inode.c
+++ b/fs/smbfs/inode.c
@@ -69,9 +69,8 @@
static void init_once(void * foo, struct kmem_cache * cachep, unsigned long flags)
{
struct smb_inode_info *ei = (struct smb_inode_info *) foo;
- unsigned long flagmask = SLAB_CTOR_VERIFY|SLAB_CTOR_CONSTRUCTOR;
- if ((flags & flagmask) == SLAB_CTOR_CONSTRUCTOR)
+ if (flags & SLAB_CTOR_CONSTRUCTOR)
inode_init_once(&ei->vfs_inode);
}
diff --git a/fs/sysv/dir.c b/fs/sysv/dir.c
index ebf7007..e566b38 100644
--- a/fs/sysv/dir.c
+++ b/fs/sysv/dir.c
@@ -54,17 +54,9 @@
{
struct address_space *mapping = dir->i_mapping;
struct page *page = read_mapping_page(mapping, n, NULL);
- if (!IS_ERR(page)) {
- wait_on_page_locked(page);
+ if (!IS_ERR(page))
kmap(page);
- if (!PageUptodate(page))
- goto fail;
- }
return page;
-
-fail:
- dir_put_page(page);
- return ERR_PTR(-EIO);
}
static int sysv_readdir(struct file * filp, void * dirent, filldir_t filldir)
diff --git a/fs/sysv/inode.c b/fs/sysv/inode.c
index 9311cac..3152d74 100644
--- a/fs/sysv/inode.c
+++ b/fs/sysv/inode.c
@@ -322,8 +322,7 @@
{
struct sysv_inode_info *si = (struct sysv_inode_info *)p;
- if ((flags & (SLAB_CTOR_VERIFY|SLAB_CTOR_CONSTRUCTOR)) ==
- SLAB_CTOR_CONSTRUCTOR)
+ if (flags & SLAB_CTOR_CONSTRUCTOR)
inode_init_once(&si->vfs_inode);
}
diff --git a/fs/udf/super.c b/fs/udf/super.c
index 8672b88..023b304 100644
--- a/fs/udf/super.c
+++ b/fs/udf/super.c
@@ -134,9 +134,7 @@
{
struct udf_inode_info *ei = (struct udf_inode_info *) foo;
- if ((flags & (SLAB_CTOR_VERIFY|SLAB_CTOR_CONSTRUCTOR)) ==
- SLAB_CTOR_CONSTRUCTOR)
- {
+ if (flags & SLAB_CTOR_CONSTRUCTOR) {
ei->i_ext.i_data = NULL;
inode_init_once(&ei->vfs_inode);
}
diff --git a/fs/ufs/dir.c b/fs/ufs/dir.c
index 4890ddf..4fb8b2e 100644
--- a/fs/ufs/dir.c
+++ b/fs/ufs/dir.c
@@ -180,13 +180,9 @@
static struct page *ufs_get_page(struct inode *dir, unsigned long n)
{
struct address_space *mapping = dir->i_mapping;
- struct page *page = read_cache_page(mapping, n,
- (filler_t*)mapping->a_ops->readpage, NULL);
+ struct page *page = read_mapping_page(mapping, n, NULL);
if (!IS_ERR(page)) {
- wait_on_page_locked(page);
kmap(page);
- if (!PageUptodate(page))
- goto fail;
if (!PageChecked(page))
ufs_check_page(page);
if (PageError(page))
diff --git a/fs/ufs/super.c b/fs/ufs/super.c
index b5a6461..be7c48c 100644
--- a/fs/ufs/super.c
+++ b/fs/ufs/super.c
@@ -1237,8 +1237,7 @@
{
struct ufs_inode_info *ei = (struct ufs_inode_info *) foo;
- if ((flags & (SLAB_CTOR_VERIFY|SLAB_CTOR_CONSTRUCTOR)) ==
- SLAB_CTOR_CONSTRUCTOR)
+ if (flags & SLAB_CTOR_CONSTRUCTOR)
inode_init_once(&ei->vfs_inode);
}
diff --git a/fs/ufs/util.c b/fs/ufs/util.c
index 1743757..84357f1 100644
--- a/fs/ufs/util.c
+++ b/fs/ufs/util.c
@@ -251,13 +251,11 @@
page = find_lock_page(mapping, index);
if (!page) {
- page = read_cache_page(mapping, index,
- (filler_t*)mapping->a_ops->readpage,
- NULL);
+ page = read_mapping_page(mapping, index, NULL);
if (IS_ERR(page)) {
printk(KERN_ERR "ufs_change_blocknr: "
- "read_cache_page error: ino %lu, index: %lu\n",
+ "read_mapping_page error: ino %lu, index: %lu\n",
mapping->host->i_ino, index);
goto out;
}
diff --git a/fs/xfs/linux-2.6/xfs_super.c b/fs/xfs/linux-2.6/xfs_super.c
index 2f2c40d..14e2cbe 100644
--- a/fs/xfs/linux-2.6/xfs_super.c
+++ b/fs/xfs/linux-2.6/xfs_super.c
@@ -360,8 +360,7 @@
kmem_zone_t *zonep,
unsigned long flags)
{
- if ((flags & (SLAB_CTOR_VERIFY|SLAB_CTOR_CONSTRUCTOR)) ==
- SLAB_CTOR_CONSTRUCTOR)
+ if (flags & SLAB_CTOR_CONSTRUCTOR)
inode_init_once(vn_to_inode((bhv_vnode_t *)vnode));
}
diff --git a/include/asm-alpha/thread_info.h b/include/asm-alpha/thread_info.h
index 69ffd93..eeb3bef 100644
--- a/include/asm-alpha/thread_info.h
+++ b/include/asm-alpha/thread_info.h
@@ -92,5 +92,27 @@
#define _TIF_ALLWORK_MASK (_TIF_WORK_MASK \
| _TIF_SYSCALL_TRACE)
+#define ALPHA_UAC_SHIFT 6
+#define ALPHA_UAC_MASK (1 << TIF_UAC_NOPRINT | 1 << TIF_UAC_NOFIX | \
+ 1 << TIF_UAC_SIGBUS)
+
+#define SET_UNALIGN_CTL(task,value) ({ \
+ (task)->thread_info->flags = (((task)->thread_info->flags & \
+ ~ALPHA_UAC_MASK) \
+ | (((value) << ALPHA_UAC_SHIFT) & (1<<TIF_UAC_NOPRINT))\
+ | (((value) << (ALPHA_UAC_SHIFT + 1)) & (1<<TIF_UAC_SIGBUS)) \
+ | (((value) << (ALPHA_UAC_SHIFT - 1)) & (1<<TIF_UAC_NOFIX)));\
+ 0; })
+
+#define GET_UNALIGN_CTL(task,value) ({ \
+ put_user(((task)->thread_info->flags & (1 << TIF_UAC_NOPRINT)) \
+ >> ALPHA_UAC_SHIFT \
+ | ((task)->thread_info->flags & (1 << TIF_UAC_SIGBUS)) \
+ >> (ALPHA_UAC_SHIFT + 1) \
+ | ((task)->thread_info->flags & (1 << TIF_UAC_NOFIX)) \
+ >> (ALPHA_UAC_SHIFT - 1), \
+ (int __user *)(value)); \
+ })
+
#endif /* __KERNEL__ */
#endif /* _ALPHA_THREAD_INFO_H */
diff --git a/include/asm-blackfin/Kbuild b/include/asm-blackfin/Kbuild
new file mode 100644
index 0000000..c68e168
--- /dev/null
+++ b/include/asm-blackfin/Kbuild
@@ -0,0 +1 @@
+include include/asm-generic/Kbuild.asm
diff --git a/include/asm-blackfin/a.out.h b/include/asm-blackfin/a.out.h
new file mode 100644
index 0000000..d37a684
--- /dev/null
+++ b/include/asm-blackfin/a.out.h
@@ -0,0 +1,25 @@
+#ifndef __BFIN_A_OUT_H__
+#define __BFIN_A_OUT_H__
+
+struct exec {
+ unsigned long a_info; /* Use macros N_MAGIC, etc for access */
+ unsigned a_text; /* length of text, in bytes */
+ unsigned a_data; /* length of data, in bytes */
+ unsigned a_bss; /* length of uninitialized data area for file, in bytes */
+ unsigned a_syms; /* length of symbol table data in file, in bytes */
+ unsigned a_entry; /* start address */
+ unsigned a_trsize; /* length of relocation info for text, in bytes */
+ unsigned a_drsize; /* length of relocation info for data, in bytes */
+};
+
+#define N_TRSIZE(a) ((a).a_trsize)
+#define N_DRSIZE(a) ((a).a_drsize)
+#define N_SYMSIZE(a) ((a).a_syms)
+
+#ifdef __KERNEL__
+
+#define STACK_TOP TASK_SIZE
+
+#endif
+
+#endif /* __BFIN_A_OUT_H__ */
diff --git a/include/asm-blackfin/atomic.h b/include/asm-blackfin/atomic.h
new file mode 100644
index 0000000..7cf5087
--- /dev/null
+++ b/include/asm-blackfin/atomic.h
@@ -0,0 +1,144 @@
+#ifndef __ARCH_BLACKFIN_ATOMIC__
+#define __ARCH_BLACKFIN_ATOMIC__
+
+#include <asm/system.h> /* local_irq_XXX() */
+
+/*
+ * Atomic operations that C can't guarantee us. Useful for
+ * resource counting etc..
+ *
+ * Generally we do not concern about SMP BFIN systems, so we don't have
+ * to deal with that.
+ *
+ * Tony Kou (tonyko@lineo.ca) Lineo Inc. 2001
+ */
+
+typedef struct {
+ int counter;
+} atomic_t;
+#define ATOMIC_INIT(i) { (i) }
+
+#define atomic_read(v) ((v)->counter)
+#define atomic_set(v, i) (((v)->counter) = i)
+
+static __inline__ void atomic_add(int i, atomic_t * v)
+{
+ long flags;
+
+ local_irq_save(flags);
+ v->counter += i;
+ local_irq_restore(flags);
+}
+
+static __inline__ void atomic_sub(int i, atomic_t * v)
+{
+ long flags;
+
+ local_irq_save(flags);
+ v->counter -= i;
+ local_irq_restore(flags);
+
+}
+
+static inline int atomic_add_return(int i, atomic_t * v)
+{
+ int __temp = 0;
+ long flags;
+
+ local_irq_save(flags);
+ v->counter += i;
+ __temp = v->counter;
+ local_irq_restore(flags);
+
+
+ return __temp;
+}
+
+#define atomic_add_negative(a, v) (atomic_add_return((a), (v)) < 0)
+static inline int atomic_sub_return(int i, atomic_t * v)
+{
+ int __temp = 0;
+ long flags;
+
+ local_irq_save(flags);
+ v->counter -= i;
+ __temp = v->counter;
+ local_irq_restore(flags);
+
+ return __temp;
+}
+
+static __inline__ void atomic_inc(volatile atomic_t * v)
+{
+ long flags;
+
+ local_irq_save(flags);
+ v->counter++;
+ local_irq_restore(flags);
+}
+
+#define atomic_cmpxchg(v, o, n) ((int)cmpxchg(&((v)->counter), (o), (n)))
+#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
+
+#define atomic_add_unless(v, a, u) \
+({ \
+ int c, old; \
+ c = atomic_read(v); \
+ while (c != (u) && (old = atomic_cmpxchg((v), c, c + (a))) != c) \
+ c = old; \
+ c != (u); \
+})
+#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
+
+static __inline__ void atomic_dec(volatile atomic_t * v)
+{
+ long flags;
+
+ local_irq_save(flags);
+ v->counter--;
+ local_irq_restore(flags);
+}
+
+static __inline__ void atomic_clear_mask(unsigned int mask, atomic_t * v)
+{
+ long flags;
+
+ local_irq_save(flags);
+ v->counter &= ~mask;
+ local_irq_restore(flags);
+}
+
+static __inline__ void atomic_set_mask(unsigned int mask, atomic_t * v)
+{
+ long flags;
+
+ local_irq_save(flags);
+ v->counter |= mask;
+ local_irq_restore(flags);
+}
+
+/* Atomic operations are already serializing */
+#define smp_mb__before_atomic_dec() barrier()
+#define smp_mb__after_atomic_dec() barrier()
+#define smp_mb__before_atomic_inc() barrier()
+#define smp_mb__after_atomic_inc() barrier()
+
+#define atomic_dec_return(v) atomic_sub_return(1,(v))
+#define atomic_inc_return(v) atomic_add_return(1,(v))
+
+/*
+ * atomic_inc_and_test - increment and test
+ * @v: pointer of type atomic_t
+ *
+ * Atomically increments @v by 1
+ * and returns true if the result is zero, or false for all
+ * other cases.
+ */
+#define atomic_inc_and_test(v) (atomic_inc_return(v) == 0)
+
+#define atomic_sub_and_test(i,v) (atomic_sub_return((i), (v)) == 0)
+#define atomic_dec_and_test(v) (atomic_sub_return(1, (v)) == 0)
+
+#include <asm-generic/atomic.h>
+
+#endif /* __ARCH_BLACKFIN_ATOMIC __ */
diff --git a/include/asm-blackfin/auxvec.h b/include/asm-blackfin/auxvec.h
new file mode 100644
index 0000000..215506c
--- /dev/null
+++ b/include/asm-blackfin/auxvec.h
@@ -0,0 +1,4 @@
+#ifndef __ASMBFIN_AUXVEC_H
+#define __ASMBFIN_AUXVEC_H
+
+#endif
diff --git a/include/asm-blackfin/bf5xx_timers.h b/include/asm-blackfin/bf5xx_timers.h
new file mode 100644
index 0000000..86c7703
--- /dev/null
+++ b/include/asm-blackfin/bf5xx_timers.h
@@ -0,0 +1,209 @@
+/*
+ * include/asm/bf5xx_timers.h
+ *
+ * This file contains the major Data structures and constants
+ * used for General Purpose Timer Implementation in BF5xx
+ *
+ * Copyright (C) 2005 John DeHority
+ * Copyright (C) 2006 Hella Aglaia GmbH (awe@aglaia-gmbh.de)
+ *
+ */
+
+#ifndef _BLACKFIN_TIMERS_H_
+#define _BLACKFIN_TIMERS_H_
+
+#undef MAX_BLACKFIN_GPTIMERS
+/*
+ * BF537: 8 timers:
+ */
+#if defined(CONFIG_BF537)
+# define MAX_BLACKFIN_GPTIMERS 8
+# define TIMER0_GROUP_REG TIMER_ENABLE
+#endif
+/*
+ * BF561: 12 timers:
+ */
+#if defined(CONFIG_BF561)
+# define MAX_BLACKFIN_GPTIMERS 12
+# define TIMER0_GROUP_REG TMRS8_ENABLE
+# define TIMER8_GROUP_REG TMRS4_ENABLE
+#endif
+/*
+ * All others: 3 timers:
+ */
+#if !defined(MAX_BLACKFIN_GPTIMERS)
+# define MAX_BLACKFIN_GPTIMERS 3
+# define TIMER0_GROUP_REG TIMER_ENABLE
+#endif
+
+#define BLACKFIN_GPTIMER_IDMASK ((1UL << MAX_BLACKFIN_GPTIMERS) - 1)
+#define BFIN_TIMER_OCTET(x) ((x) >> 3)
+
+/* used in masks for timer_enable() and timer_disable() */
+#define TIMER0bit 0x0001 /* 0001b */
+#define TIMER1bit 0x0002 /* 0010b */
+#define TIMER2bit 0x0004 /* 0100b */
+
+#if (MAX_BLACKFIN_GPTIMERS > 3)
+# define TIMER3bit 0x0008
+# define TIMER4bit 0x0010
+# define TIMER5bit 0x0020
+# define TIMER6bit 0x0040
+# define TIMER7bit 0x0080
+#endif
+
+#if (MAX_BLACKFIN_GPTIMERS > 8)
+# define TIMER8bit 0x0100
+# define TIMER9bit 0x0200
+# define TIMER10bit 0x0400
+# define TIMER11bit 0x0800
+#endif
+
+#define TIMER0_id 0
+#define TIMER1_id 1
+#define TIMER2_id 2
+
+#if (MAX_BLACKFIN_GPTIMERS > 3)
+# define TIMER3_id 3
+# define TIMER4_id 4
+# define TIMER5_id 5
+# define TIMER6_id 6
+# define TIMER7_id 7
+#endif
+
+#if (MAX_BLACKFIN_GPTIMERS > 8)
+# define TIMER8_id 8
+# define TIMER9_id 9
+# define TIMER10_id 10
+# define TIMER11_id 11
+#endif
+
+/* associated timers for ppi framesync: */
+
+#if defined(CONFIG_BF561)
+# define FS0_1_TIMER_ID TIMER8_id
+# define FS0_2_TIMER_ID TIMER9_id
+# define FS1_1_TIMER_ID TIMER10_id
+# define FS1_2_TIMER_ID TIMER11_id
+# define FS0_1_TIMER_BIT TIMER8bit
+# define FS0_2_TIMER_BIT TIMER9bit
+# define FS1_1_TIMER_BIT TIMER10bit
+# define FS1_2_TIMER_BIT TIMER11bit
+# undef FS1_TIMER_ID
+# undef FS2_TIMER_ID
+# undef FS1_TIMER_BIT
+# undef FS2_TIMER_BIT
+#else
+# define FS1_TIMER_ID TIMER0_id
+# define FS2_TIMER_ID TIMER1_id
+# define FS1_TIMER_BIT TIMER0bit
+# define FS2_TIMER_BIT TIMER1bit
+#endif
+
+/*
+** Timer Configuration Register Bits
+*/
+#define TIMER_ERR 0xC000
+#define TIMER_ERR_OVFL 0x4000
+#define TIMER_ERR_PROG_PER 0x8000
+#define TIMER_ERR_PROG_PW 0xC000
+#define TIMER_EMU_RUN 0x0200
+#define TIMER_TOGGLE_HI 0x0100
+#define TIMER_CLK_SEL 0x0080
+#define TIMER_OUT_DIS 0x0040
+#define TIMER_TIN_SEL 0x0020
+#define TIMER_IRQ_ENA 0x0010
+#define TIMER_PERIOD_CNT 0x0008
+#define TIMER_PULSE_HI 0x0004
+#define TIMER_MODE 0x0003
+#define TIMER_MODE_PWM 0x0001
+#define TIMER_MODE_WDTH 0x0002
+#define TIMER_MODE_EXT_CLK 0x0003
+
+/*
+** Timer Status Register Bits
+*/
+#define TIMER_STATUS_TIMIL0 0x0001
+#define TIMER_STATUS_TIMIL1 0x0002
+#define TIMER_STATUS_TIMIL2 0x0004
+#if (MAX_BLACKFIN_GPTIMERS > 3)
+# define TIMER_STATUS_TIMIL3 0x00000008
+# define TIMER_STATUS_TIMIL4 0x00010000
+# define TIMER_STATUS_TIMIL5 0x00020000
+# define TIMER_STATUS_TIMIL6 0x00040000
+# define TIMER_STATUS_TIMIL7 0x00080000
+# if (MAX_BLACKFIN_GPTIMERS > 8)
+# define TIMER_STATUS_TIMIL8 0x0001
+# define TIMER_STATUS_TIMIL9 0x0002
+# define TIMER_STATUS_TIMIL10 0x0004
+# define TIMER_STATUS_TIMIL11 0x0008
+# endif
+# define TIMER_STATUS_INTR 0x000F000F
+#else
+# define TIMER_STATUS_INTR 0x0007 /* any timer interrupt */
+#endif
+
+#define TIMER_STATUS_TOVF0 0x0010 /* timer 0 overflow error */
+#define TIMER_STATUS_TOVF1 0x0020
+#define TIMER_STATUS_TOVF2 0x0040
+#if (MAX_BLACKFIN_GPTIMERS > 3)
+# define TIMER_STATUS_TOVF3 0x00000080
+# define TIMER_STATUS_TOVF4 0x00100000
+# define TIMER_STATUS_TOVF5 0x00200000
+# define TIMER_STATUS_TOVF6 0x00400000
+# define TIMER_STATUS_TOVF7 0x00800000
+# if (MAX_BLACKFIN_GPTIMERS > 8)
+# define TIMER_STATUS_TOVF8 0x0010
+# define TIMER_STATUS_TOVF9 0x0020
+# define TIMER_STATUS_TOVF10 0x0040
+# define TIMER_STATUS_TOVF11 0x0080
+# endif
+# define TIMER_STATUS_OFLOW 0x00F000F0
+#else
+# define TIMER_STATUS_OFLOW 0x0070 /* any timer overflow */
+#endif
+
+/*
+** Timer Slave Enable Status : write 1 to clear
+*/
+#define TIMER_STATUS_TRUN0 0x1000
+#define TIMER_STATUS_TRUN1 0x2000
+#define TIMER_STATUS_TRUN2 0x4000
+#if (MAX_BLACKFIN_GPTIMERS > 3)
+# define TIMER_STATUS_TRUN3 0x00008000
+# define TIMER_STATUS_TRUN4 0x10000000
+# define TIMER_STATUS_TRUN5 0x20000000
+# define TIMER_STATUS_TRUN6 0x40000000
+# define TIMER_STATUS_TRUN7 0x80000000
+# define TIMER_STATUS_TRUN 0xF000F000
+# if (MAX_BLACKFIN_GPTIMERS > 8)
+# define TIMER_STATUS_TRUN8 0x1000
+# define TIMER_STATUS_TRUN9 0x2000
+# define TIMER_STATUS_TRUN10 0x4000
+# define TIMER_STATUS_TRUN11 0x8000
+# endif
+#else
+# define TIMER_STATUS_TRUN 0x7000
+#endif
+
+/*******************************************************************************
+* GP_TIMER API's
+*******************************************************************************/
+
+void set_gptimer_pwidth (int timer_id, int width);
+int get_gptimer_pwidth (int timer_id);
+void set_gptimer_period (int timer_id, int period);
+int get_gptimer_period (int timer_id);
+int get_gptimer_count (int timer_id);
+short get_gptimer_intr (int timer_id);
+void set_gptimer_config (int timer_id, short config);
+short get_gptimer_config (int timer_id);
+void set_gptimer_pulse_hi (int timer_id);
+void clear_gptimer_pulse_hi(int timer_id);
+void enable_gptimers (short mask);
+void disable_gptimers (short mask);
+short get_enabled_timers (void);
+int get_gptimer_status (int octet);
+void set_gptimer_status (int octet, int value);
+
+#endif
diff --git a/include/asm-blackfin/bfin-global.h b/include/asm-blackfin/bfin-global.h
new file mode 100644
index 0000000..e37f816
--- /dev/null
+++ b/include/asm-blackfin/bfin-global.h
@@ -0,0 +1,120 @@
+/*
+ * File: include/asm-blackfin/bfin-global.h
+ * Based on:
+ * Author: *
+ * Created:
+ * Description: Global extern defines for blackfin
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef _BFIN_GLOBAL_H_
+#define _BFIN_GLOBAL_H_
+
+#ifndef __ASSEMBLY__
+
+#include <asm-generic/sections.h>
+#include <asm/ptrace.h>
+#include <asm/user.h>
+#include <linux/linkage.h>
+#include <linux/types.h>
+
+#if defined(CONFIG_DMA_UNCACHED_2M)
+# define DMA_UNCACHED_REGION (2 * 1024 * 1024)
+#elif defined(CONFIG_DMA_UNCACHED_1M)
+# define DMA_UNCACHED_REGION (1024 * 1024)
+#else
+# define DMA_UNCACHED_REGION (0)
+#endif
+
+extern unsigned long get_cclk(void);
+extern unsigned long get_sclk(void);
+
+extern void dump_thread(struct pt_regs *regs, struct user *dump);
+extern void dump_bfin_regs(struct pt_regs *fp, void *retaddr);
+extern void dump_bfin_trace_buffer(void);
+
+extern int init_arch_irq(void);
+extern void bfin_reset(void);
+extern void _cplb_hdr(void);
+/* Blackfin cache functions */
+extern void bfin_icache_init(void);
+extern void bfin_dcache_init(void);
+extern int read_iloc(void);
+extern int bfin_console_init(void);
+extern asmlinkage void lower_to_irq14(void);
+extern void init_dma(void);
+extern void program_IAR(void);
+extern void evt14_softirq(void);
+extern asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs);
+extern void bfin_gpio_interrupt_setup(int irq, int irq_pfx, int type);
+
+extern void *l1_data_A_sram_alloc(size_t);
+extern void *l1_data_B_sram_alloc(size_t);
+extern void *l1_inst_sram_alloc(size_t);
+extern void *l1_data_sram_alloc(size_t);
+extern void *l1_data_sram_zalloc(size_t);
+extern int l1_data_A_sram_free(const void*);
+extern int l1_data_B_sram_free(const void*);
+extern int l1_inst_sram_free(const void*);
+extern int l1_data_sram_free(const void*);
+extern int sram_free(const void*);
+
+#define L1_INST_SRAM 0x00000001
+#define L1_DATA_A_SRAM 0x00000002
+#define L1_DATA_B_SRAM 0x00000004
+#define L1_DATA_SRAM 0x00000006
+extern void *sram_alloc_with_lsl(size_t, unsigned long);
+extern int sram_free_with_lsl(const void*);
+
+extern void led_on(int);
+extern void led_off(int);
+extern void led_toggle(int);
+extern void led_disp_num(int);
+extern void led_toggle_num(int);
+extern void init_leds(void);
+
+extern char *bfin_board_name __attribute__ ((weak));
+extern unsigned long wall_jiffies;
+extern unsigned long ipdt_table[];
+extern unsigned long dpdt_table[];
+extern unsigned long icplb_table[];
+extern unsigned long dcplb_table[];
+
+extern unsigned long ipdt_swapcount_table[];
+extern unsigned long dpdt_swapcount_table[];
+
+extern unsigned long table_start, table_end;
+
+extern struct file_operations dpmc_fops;
+extern char _start;
+extern unsigned long _ramstart, _ramend, _rambase;
+extern unsigned long memory_start, memory_end, physical_mem_end;
+extern char _stext_l1[], _etext_l1[], _sdata_l1[], _edata_l1[], _sbss_l1[],
+ _ebss_l1[], _l1_lma_start[], _sdata_b_l1[], _ebss_b_l1[];
+
+#ifdef CONFIG_MTD_UCLINUX
+extern unsigned long memory_mtd_start, memory_mtd_end, mtd_size;
+#endif
+
+#endif
+
+#endif /* _BLACKFIN_H_ */
diff --git a/include/asm-blackfin/bfin5xx_spi.h b/include/asm-blackfin/bfin5xx_spi.h
new file mode 100644
index 0000000..95c1c95
--- /dev/null
+++ b/include/asm-blackfin/bfin5xx_spi.h
@@ -0,0 +1,170 @@
+/************************************************************
+*
+* Copyright (C) 2004, Analog Devices. All Rights Reserved
+*
+* FILE bfin5xx_spi.h
+* PROGRAMMER(S): Luke Yang (Analog Devices Inc.)
+*
+*
+* DATE OF CREATION: March. 10th 2006
+*
+* SYNOPSIS:
+*
+* DESCRIPTION: header file for SPI controller driver for Blackfin5xx.
+**************************************************************
+
+* MODIFICATION HISTORY:
+* March 10, 2006 bfin5xx_spi.h Created. (Luke Yang)
+
+************************************************************/
+
+#ifndef _SPI_CHANNEL_H_
+#define _SPI_CHANNEL_H_
+
+#define SPI0_REGBASE 0xffc00500
+
+#define SPI_READ 0
+#define SPI_WRITE 1
+
+#define SPI_CTRL_OFF 0x0
+#define SPI_FLAG_OFF 0x4
+#define SPI_STAT_OFF 0x8
+#define SPI_TXBUFF_OFF 0xc
+#define SPI_RXBUFF_OFF 0x10
+#define SPI_BAUD_OFF 0x14
+#define SPI_SHAW_OFF 0x18
+
+#define CMD_SPI_OUT_ENABLE 1
+#define CMD_SPI_SET_BAUDRATE 2
+#define CMD_SPI_SET_POLAR 3
+#define CMD_SPI_SET_PHASE 4
+#define CMD_SPI_SET_MASTER 5
+#define CMD_SPI_SET_SENDOPT 6
+#define CMD_SPI_SET_RECVOPT 7
+#define CMD_SPI_SET_ORDER 8
+#define CMD_SPI_SET_LENGTH16 9
+#define CMD_SPI_GET_STAT 11
+#define CMD_SPI_GET_CFG 12
+#define CMD_SPI_SET_CSAVAIL 13
+#define CMD_SPI_SET_CSHIGH 14 /* CS unavail */
+#define CMD_SPI_SET_CSLOW 15 /* CS avail */
+#define CMD_SPI_MISO_ENABLE 16
+#define CMD_SPI_SET_CSENABLE 17
+#define CMD_SPI_SET_CSDISABLE 18
+
+#define CMD_SPI_SET_TRIGGER_MODE 19
+#define CMD_SPI_SET_TRIGGER_SENSE 20
+#define CMD_SPI_SET_TRIGGER_EDGE 21
+#define CMD_SPI_SET_TRIGGER_LEVEL 22
+
+#define CMD_SPI_SET_TIME_SPS 23
+#define CMD_SPI_SET_TIME_SAMPLES 24
+#define CMD_SPI_GET_SYSTEMCLOCK 25
+
+#define CMD_SPI_SET_WRITECONTINUOUS 26
+#define CMD_SPI_SET_SKFS 27
+
+#define CMD_SPI_GET_ALLCONFIG 32 /* For debug */
+
+#define SPI_DEFAULT_BARD 0x0100
+
+#define SPI0_IRQ_NUM IRQ_SPI
+#define SPI_ERR_TRIG -1
+
+#define BIT_CTL_ENABLE 0x4000
+#define BIT_CTL_OPENDRAIN 0x2000
+#define BIT_CTL_MASTER 0x1000
+#define BIT_CTL_POLAR 0x0800
+#define BIT_CTL_PHASE 0x0400
+#define BIT_CTL_BITORDER 0x0200
+#define BIT_CTL_WORDSIZE 0x0100
+#define BIT_CTL_MISOENABLE 0x0020
+#define BIT_CTL_RXMOD 0x0000
+#define BIT_CTL_TXMOD 0x0001
+#define BIT_CTL_TIMOD_DMA_TX 0x0003
+#define BIT_CTL_TIMOD_DMA_RX 0x0002
+#define BIT_CTL_SENDOPT 0x0004
+#define BIT_CTL_TIMOD 0x0003
+
+#define BIT_STAT_SPIF 0x0001
+#define BIT_STAT_MODF 0x0002
+#define BIT_STAT_TXE 0x0004
+#define BIT_STAT_TXS 0x0008
+#define BIT_STAT_RBSY 0x0010
+#define BIT_STAT_RXS 0x0020
+#define BIT_STAT_TXCOL 0x0040
+#define BIT_STAT_CLR 0xFFFF
+
+#define BIT_STU_SENDOVER 0x0001
+#define BIT_STU_RECVFULL 0x0020
+
+#define CFG_SPI_ENABLE 1
+#define CFG_SPI_DISABLE 0
+
+#define CFG_SPI_OUTENABLE 1
+#define CFG_SPI_OUTDISABLE 0
+
+#define CFG_SPI_ACTLOW 1
+#define CFG_SPI_ACTHIGH 0
+
+#define CFG_SPI_PHASESTART 1
+#define CFG_SPI_PHASEMID 0
+
+#define CFG_SPI_MASTER 1
+#define CFG_SPI_SLAVE 0
+
+#define CFG_SPI_SENELAST 0
+#define CFG_SPI_SENDZERO 1
+
+#define CFG_SPI_RCVFLUSH 1
+#define CFG_SPI_RCVDISCARD 0
+
+#define CFG_SPI_LSBFIRST 1
+#define CFG_SPI_MSBFIRST 0
+
+#define CFG_SPI_WORDSIZE16 1
+#define CFG_SPI_WORDSIZE8 0
+
+#define CFG_SPI_MISOENABLE 1
+#define CFG_SPI_MISODISABLE 0
+
+#define CFG_SPI_READ 0x00
+#define CFG_SPI_WRITE 0x01
+#define CFG_SPI_DMAREAD 0x02
+#define CFG_SPI_DMAWRITE 0x03
+
+#define CFG_SPI_CSCLEARALL 0
+#define CFG_SPI_CHIPSEL1 1
+#define CFG_SPI_CHIPSEL2 2
+#define CFG_SPI_CHIPSEL3 3
+#define CFG_SPI_CHIPSEL4 4
+#define CFG_SPI_CHIPSEL5 5
+#define CFG_SPI_CHIPSEL6 6
+#define CFG_SPI_CHIPSEL7 7
+
+#define CFG_SPI_CS1VALUE 1
+#define CFG_SPI_CS2VALUE 2
+#define CFG_SPI_CS3VALUE 3
+#define CFG_SPI_CS4VALUE 4
+#define CFG_SPI_CS5VALUE 5
+#define CFG_SPI_CS6VALUE 6
+#define CFG_SPI_CS7VALUE 7
+
+/* device.platform_data for SSP controller devices */
+struct bfin5xx_spi_master {
+ u16 num_chipselect;
+ u8 enable_dma;
+};
+
+/* spi_board_info.controller_data for SPI slave devices,
+ * copied to spi_device.platform_data ... mostly for dma tuning
+ */
+struct bfin5xx_spi_chip {
+ u16 ctl_reg;
+ u8 enable_dma;
+ u8 bits_per_word;
+ u8 cs_change_per_word;
+ u8 cs_chg_udelay;
+};
+
+#endif /* _SPI_CHANNEL_H_ */
diff --git a/include/asm-blackfin/bfin_simple_timer.h b/include/asm-blackfin/bfin_simple_timer.h
new file mode 100644
index 0000000..fccbb59
--- /dev/null
+++ b/include/asm-blackfin/bfin_simple_timer.h
@@ -0,0 +1,13 @@
+#ifndef _bfin_simple_timer_h_
+#define _bfin_simple_timer_h_
+
+#include <linux/ioctl.h>
+
+#define BFIN_SIMPLE_TIMER_IOCTL_MAGIC 't'
+
+#define BFIN_SIMPLE_TIMER_SET_PERIOD _IO (BFIN_SIMPLE_TIMER_IOCTL_MAGIC, 2)
+#define BFIN_SIMPLE_TIMER_START _IO (BFIN_SIMPLE_TIMER_IOCTL_MAGIC, 6)
+#define BFIN_SIMPLE_TIMER_STOP _IO (BFIN_SIMPLE_TIMER_IOCTL_MAGIC, 8)
+#define BFIN_SIMPLE_TIMER_READ _IO (BFIN_SIMPLE_TIMER_IOCTL_MAGIC, 10)
+
+#endif
diff --git a/include/asm-blackfin/bfin_sport.h b/include/asm-blackfin/bfin_sport.h
new file mode 100644
index 0000000..c76ed8d
--- /dev/null
+++ b/include/asm-blackfin/bfin_sport.h
@@ -0,0 +1,175 @@
+/*
+ * File: include/asm-blackfin/bfin_sport.h
+ * Based on:
+ * Author: Roy Huang (roy.huang@analog.com)
+ *
+ * Created: Thu Aug. 24 2006
+ * Description:
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef __BFIN_SPORT_H__
+#define __BFIN_SPORT_H__
+
+#define SPORT_MAJOR 237
+#define SPORT_NR_DEVS 2
+
+/* Sport mode: it can be set to TDM, i2s or others */
+#define NORM_MODE 0x0
+#define TDM_MODE 0x1
+#define I2S_MODE 0x2
+
+/* Data format, normal, a-law or u-law */
+#define NORM_FORMAT 0x0
+#define ALAW_FORMAT 0x2
+#define ULAW_FORMAT 0x3
+struct sport_register;
+
+/* Function driver which use sport must initialize the structure */
+struct sport_config {
+ /*TDM (multichannels), I2S or other mode */
+ unsigned int mode:3;
+
+ /* if TDM mode is selected, channels must be set */
+ int channels; /* Must be in 8 units */
+ unsigned int frame_delay:4; /* Delay between frame sync pulse and first bit */
+
+ /* I2S mode */
+ unsigned int right_first:1; /* Right stereo channel first */
+
+ /* In mormal mode, the following item need to be set */
+ unsigned int lsb_first:1; /* order of transmit or receive data */
+ unsigned int fsync:1; /* Frame sync required */
+ unsigned int data_indep:1; /* data independent frame sync generated */
+ unsigned int act_low:1; /* Active low TFS */
+ unsigned int late_fsync:1; /* Late frame sync */
+ unsigned int tckfe:1;
+ unsigned int sec_en:1; /* Secondary side enabled */
+
+ /* Choose clock source */
+ unsigned int int_clk:1; /* Internal or external clock */
+
+ /* If external clock is used, the following fields are ignored */
+ int serial_clk;
+ int fsync_clk;
+
+ unsigned int data_format:2; /*Normal, u-law or a-law */
+
+ int word_len; /* How length of the word in bits, 3-32 bits */
+ int dma_enabled;
+};
+
+struct sport_register {
+ unsigned short tcr1;
+ unsigned short reserved0;
+ unsigned short tcr2;
+ unsigned short reserved1;
+ unsigned short tclkdiv;
+ unsigned short reserved2;
+ unsigned short tfsdiv;
+ unsigned short reserved3;
+ unsigned long tx;
+ unsigned long reserved_l0;
+ unsigned long rx;
+ unsigned long reserved_l1;
+ unsigned short rcr1;
+ unsigned short reserved4;
+ unsigned short rcr2;
+ unsigned short reserved5;
+ unsigned short rclkdiv;
+ unsigned short reserved6;
+ unsigned short rfsdiv;
+ unsigned short reserved7;
+ unsigned short stat;
+ unsigned short reserved8;
+ unsigned short chnl;
+ unsigned short reserved9;
+ unsigned short mcmc1;
+ unsigned short reserved10;
+ unsigned short mcmc2;
+ unsigned short reserved11;
+ unsigned long mtcs0;
+ unsigned long mtcs1;
+ unsigned long mtcs2;
+ unsigned long mtcs3;
+ unsigned long mrcs0;
+ unsigned long mrcs1;
+ unsigned long mrcs2;
+ unsigned long mrcs3;
+};
+
+#define SPORT_IOC_MAGIC 'P'
+#define SPORT_IOC_CONFIG _IOWR('P', 0x01, struct sport_config)
+
+/* Test purpose */
+#define ENABLE_AD73311 _IOWR('P', 0x02, int)
+
+struct sport_dev {
+ struct cdev cdev; /* Char device structure */
+
+ int sport_num;
+
+ int dma_rx_chan;
+ int dma_tx_chan;
+
+ int rx_irq;
+ unsigned char *rx_buf; /* Buffer store the received data */
+ int rx_len; /* How many bytes will be received */
+ int rx_received; /* How many bytes has been received */
+
+ int tx_irq;
+ const unsigned char *tx_buf;
+ int tx_len;
+ int tx_sent;
+
+ int sport_err_irq;
+
+ struct mutex mutex; /* mutual exclusion semaphore */
+ struct task_struct *task;
+
+ wait_queue_head_t waitq;
+ int wait_con;
+ struct sport_register *regs;
+ struct sport_config config;
+};
+
+#define SPORT_TCR1 0
+#define SPORT_TCR2 1
+#define SPORT_TCLKDIV 2
+#define SPORT_TFSDIV 3
+#define SPORT_RCR1 8
+#define SPORT_RCR2 9
+#define SPORT_RCLKDIV 10
+#define SPORT_RFSDIV 11
+#define SPORT_CHANNEL 13
+#define SPORT_MCMC1 14
+#define SPORT_MCMC2 15
+#define SPORT_MTCS0 16
+#define SPORT_MTCS1 17
+#define SPORT_MTCS2 18
+#define SPORT_MTCS3 19
+#define SPORT_MRCS0 20
+#define SPORT_MRCS1 21
+#define SPORT_MRCS2 22
+#define SPORT_MRCS3 23
+
+#endif /*__BFIN_SPORT_H__*/
diff --git a/include/asm-blackfin/bitops.h b/include/asm-blackfin/bitops.h
new file mode 100644
index 0000000..27c2d0e
--- /dev/null
+++ b/include/asm-blackfin/bitops.h
@@ -0,0 +1,213 @@
+#ifndef _BLACKFIN_BITOPS_H
+#define _BLACKFIN_BITOPS_H
+
+/*
+ * Copyright 1992, Linus Torvalds.
+ */
+
+#include <linux/compiler.h>
+#include <asm/byteorder.h> /* swab32 */
+#include <asm/system.h> /* save_flags */
+
+#ifdef __KERNEL__
+
+#include <asm-generic/bitops/ffs.h>
+#include <asm-generic/bitops/__ffs.h>
+#include <asm-generic/bitops/sched.h>
+#include <asm-generic/bitops/ffz.h>
+
+static __inline__ void set_bit(int nr, volatile unsigned long *addr)
+{
+ int *a = (int *)addr;
+ int mask;
+ unsigned long flags;
+
+ a += nr >> 5;
+ mask = 1 << (nr & 0x1f);
+ local_irq_save(flags);
+ *a |= mask;
+ local_irq_restore(flags);
+}
+
+static __inline__ void __set_bit(int nr, volatile unsigned long *addr)
+{
+ int *a = (int *)addr;
+ int mask;
+
+ a += nr >> 5;
+ mask = 1 << (nr & 0x1f);
+ *a |= mask;
+}
+
+/*
+ * clear_bit() doesn't provide any barrier for the compiler.
+ */
+#define smp_mb__before_clear_bit() barrier()
+#define smp_mb__after_clear_bit() barrier()
+
+static __inline__ void clear_bit(int nr, volatile unsigned long *addr)
+{
+ int *a = (int *)addr;
+ int mask;
+ unsigned long flags;
+ a += nr >> 5;
+ mask = 1 << (nr & 0x1f);
+ local_irq_save(flags);
+ *a &= ~mask;
+ local_irq_restore(flags);
+}
+
+static __inline__ void __clear_bit(int nr, volatile unsigned long *addr)
+{
+ int *a = (int *)addr;
+ int mask;
+
+ a += nr >> 5;
+ mask = 1 << (nr & 0x1f);
+ *a &= ~mask;
+}
+
+static __inline__ void change_bit(int nr, volatile unsigned long *addr)
+{
+ int mask, flags;
+ unsigned long *ADDR = (unsigned long *)addr;
+
+ ADDR += nr >> 5;
+ mask = 1 << (nr & 31);
+ local_irq_save(flags);
+ *ADDR ^= mask;
+ local_irq_restore(flags);
+}
+
+static __inline__ void __change_bit(int nr, volatile unsigned long *addr)
+{
+ int mask;
+ unsigned long *ADDR = (unsigned long *)addr;
+
+ ADDR += nr >> 5;
+ mask = 1 << (nr & 31);
+ *ADDR ^= mask;
+}
+
+static __inline__ int test_and_set_bit(int nr, void *addr)
+{
+ int mask, retval;
+ volatile unsigned int *a = (volatile unsigned int *)addr;
+ unsigned long flags;
+
+ a += nr >> 5;
+ mask = 1 << (nr & 0x1f);
+ local_irq_save(flags);
+ retval = (mask & *a) != 0;
+ *a |= mask;
+ local_irq_restore(flags);
+
+ return retval;
+}
+
+static __inline__ int __test_and_set_bit(int nr, volatile unsigned long *addr)
+{
+ int mask, retval;
+ volatile unsigned int *a = (volatile unsigned int *)addr;
+
+ a += nr >> 5;
+ mask = 1 << (nr & 0x1f);
+ retval = (mask & *a) != 0;
+ *a |= mask;
+ return retval;
+}
+
+static __inline__ int test_and_clear_bit(int nr, volatile unsigned long *addr)
+{
+ int mask, retval;
+ volatile unsigned int *a = (volatile unsigned int *)addr;
+ unsigned long flags;
+
+ a += nr >> 5;
+ mask = 1 << (nr & 0x1f);
+ local_irq_save(flags);
+ retval = (mask & *a) != 0;
+ *a &= ~mask;
+ local_irq_restore(flags);
+
+ return retval;
+}
+
+static __inline__ int __test_and_clear_bit(int nr, volatile unsigned long *addr)
+{
+ int mask, retval;
+ volatile unsigned int *a = (volatile unsigned int *)addr;
+
+ a += nr >> 5;
+ mask = 1 << (nr & 0x1f);
+ retval = (mask & *a) != 0;
+ *a &= ~mask;
+ return retval;
+}
+
+static __inline__ int test_and_change_bit(int nr, volatile unsigned long *addr)
+{
+ int mask, retval;
+ volatile unsigned int *a = (volatile unsigned int *)addr;
+ unsigned long flags;
+
+ a += nr >> 5;
+ mask = 1 << (nr & 0x1f);
+ local_irq_save(flags);
+ retval = (mask & *a) != 0;
+ *a ^= mask;
+ local_irq_restore(flags);
+ return retval;
+}
+
+static __inline__ int __test_and_change_bit(int nr,
+ volatile unsigned long *addr)
+{
+ int mask, retval;
+ volatile unsigned int *a = (volatile unsigned int *)addr;
+
+ a += nr >> 5;
+ mask = 1 << (nr & 0x1f);
+ retval = (mask & *a) != 0;
+ *a ^= mask;
+ return retval;
+}
+
+/*
+ * This routine doesn't need to be atomic.
+ */
+static __inline__ int __constant_test_bit(int nr, const void *addr)
+{
+ return ((1UL << (nr & 31)) &
+ (((const volatile unsigned int *)addr)[nr >> 5])) != 0;
+}
+
+static __inline__ int __test_bit(int nr, const void *addr)
+{
+ int *a = (int *)addr;
+ int mask;
+
+ a += nr >> 5;
+ mask = 1 << (nr & 0x1f);
+ return ((mask & *a) != 0);
+}
+
+#define test_bit(nr,addr) \
+(__builtin_constant_p(nr) ? \
+ __constant_test_bit((nr),(addr)) : \
+ __test_bit((nr),(addr)))
+
+#include <asm-generic/bitops/find.h>
+#include <asm-generic/bitops/hweight.h>
+
+#include <asm-generic/bitops/ext2-atomic.h>
+#include <asm-generic/bitops/ext2-non-atomic.h>
+
+#include <asm-generic/bitops/minix.h>
+
+#endif /* __KERNEL__ */
+
+#include <asm-generic/bitops/fls.h>
+#include <asm-generic/bitops/fls64.h>
+
+#endif /* _BLACKFIN_BITOPS_H */
diff --git a/include/asm-blackfin/blackfin.h b/include/asm-blackfin/blackfin.h
new file mode 100644
index 0000000..14e58de
--- /dev/null
+++ b/include/asm-blackfin/blackfin.h
@@ -0,0 +1,81 @@
+/*
+ * Common header file for blackfin family of processors.
+ *
+ */
+
+#ifndef _BLACKFIN_H_
+#define _BLACKFIN_H_
+
+#include <asm/macros.h>
+#include <asm/mach/blackfin.h>
+#include <asm/bfin-global.h>
+
+#ifndef __ASSEMBLY__
+
+/* SSYNC implementation for C file */
+#if defined(ANOMALY_05000312) && defined(ANOMALY_05000244)
+static inline void SSYNC (void)
+{
+ int _tmp;
+ __asm__ __volatile__ ("cli %0;\n\t"
+ "nop;nop;\n\t"
+ "ssync;\n\t"
+ "sti %0;\n\t"
+ :"=d"(_tmp):);
+}
+#elif defined(ANOMALY_05000312) && !defined(ANOMALY_05000244)
+static inline void SSYNC (void)
+{
+ int _tmp;
+ __asm__ __volatile__ ("cli %0;\n\t"
+ "ssync;\n\t"
+ "sti %0;\n\t"
+ :"=d"(_tmp):);
+}
+#elif !defined(ANOMALY_05000312) && defined(ANOMALY_05000244)
+static inline void SSYNC (void)
+{
+ __builtin_bfin_ssync();
+}
+#elif !defined(ANOMALY_05000312) && !defined(ANOMALY_05000244)
+static inline void SSYNC (void)
+{
+ __asm__ __volatile__ ("ssync;\n\t");
+}
+#endif
+
+/* CSYNC implementation for C file */
+#if defined(ANOMALY_05000312) && defined(ANOMALY_05000244)
+static inline void CSYNC (void)
+{
+ int _tmp;
+ __asm__ __volatile__ ("cli %0;\n\t"
+ "nop;nop;\n\t"
+ "csync;\n\t"
+ "sti %0;\n\t"
+ :"=d"(_tmp):);
+}
+#elif defined(ANOMALY_05000312) && !defined(ANOMALY_05000244)
+static inline void CSYNC (void)
+{
+ int _tmp;
+ __asm__ __volatile__ ("cli %0;\n\t"
+ "csync;\n\t"
+ "sti %0;\n\t"
+ :"=d"(_tmp):);
+}
+#elif !defined(ANOMALY_05000312) && defined(ANOMALY_05000244)
+static inline void CSYNC (void)
+{
+ __builtin_bfin_csync();
+}
+#elif !defined(ANOMALY_05000312) && !defined(ANOMALY_05000244)
+static inline void CSYNC (void)
+{
+ __asm__ __volatile__ ("csync;\n\t");
+}
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _BLACKFIN_H_ */
diff --git a/include/asm-blackfin/bug.h b/include/asm-blackfin/bug.h
new file mode 100644
index 0000000..41e53b2
--- /dev/null
+++ b/include/asm-blackfin/bug.h
@@ -0,0 +1,4 @@
+#ifndef _BLACKFIN_BUG_H
+#define _BLACKFIN_BUG_H
+#include <asm-generic/bug.h>
+#endif
diff --git a/include/asm-blackfin/bugs.h b/include/asm-blackfin/bugs.h
new file mode 100644
index 0000000..9093c9c
--- /dev/null
+++ b/include/asm-blackfin/bugs.h
@@ -0,0 +1,16 @@
+/*
+ * include/asm-blackfin/bugs.h
+ *
+ * Copyright (C) 1994 Linus Torvalds
+ */
+
+/*
+ * This is included by init/main.c to check for architecture-dependent bugs.
+ *
+ * Needs:
+ * void check_bugs(void);
+ */
+
+static void check_bugs(void)
+{
+}
diff --git a/include/asm-blackfin/byteorder.h b/include/asm-blackfin/byteorder.h
new file mode 100644
index 0000000..6a673d4
--- /dev/null
+++ b/include/asm-blackfin/byteorder.h
@@ -0,0 +1,48 @@
+#ifndef _BLACKFIN_BYTEORDER_H
+#define _BLACKFIN_BYTEORDER_H
+
+#include <asm/types.h>
+#include <linux/compiler.h>
+
+#ifdef __GNUC__
+
+static __inline__ __attribute_const__ __u32 ___arch__swahb32(__u32 xx)
+{
+ __u32 tmp;
+ __asm__("%1 = %0 >> 8 (V);\n\t"
+ "%0 = %0 << 8 (V);\n\t"
+ "%0 = %0 | %1;\n\t"
+ : "+d"(xx), "=&d"(tmp));
+ return xx;
+}
+
+static __inline__ __attribute_const__ __u32 ___arch__swahw32(__u32 xx)
+{
+ __u32 rv;
+ __asm__("%0 = PACK(%1.L, %1.H);\n\t": "=d"(rv): "d"(xx));
+ return rv;
+}
+
+#define __arch__swahb32(x) ___arch__swahb32(x)
+#define __arch__swahw32(x) ___arch__swahw32(x)
+#define __arch__swab32(x) ___arch__swahb32(___arch__swahw32(x))
+
+static __inline__ __attribute_const__ __u16 ___arch__swab16(__u16 xx)
+{
+ __u32 xw = xx;
+ __asm__("%0 <<= 8;\n %0.L = %0.L + %0.H (NS);\n": "+d"(xw));
+ return (__u16)xw;
+}
+
+#define __arch__swab16(x) ___arch__swab16(x)
+
+#endif
+
+#if defined(__GNUC__) && !defined(__STRICT_ANSI__) || defined(__KERNEL__)
+# define __BYTEORDER_HAS_U64__
+# define __SWAB_64_THRU_32__
+#endif
+
+#include <linux/byteorder/little_endian.h>
+
+#endif /* _BLACKFIN_BYTEORDER_H */
diff --git a/include/asm-blackfin/cache.h b/include/asm-blackfin/cache.h
new file mode 100644
index 0000000..023d721
--- /dev/null
+++ b/include/asm-blackfin/cache.h
@@ -0,0 +1,29 @@
+/*
+ * include/asm-blackfin/cache.h
+ */
+#ifndef __ARCH_BLACKFIN_CACHE_H
+#define __ARCH_BLACKFIN_CACHE_H
+
+/*
+ * Bytes per L1 cache line
+ * Blackfin loads 32 bytes for cache
+ */
+#define L1_CACHE_SHIFT 5
+#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT)
+#define SMP_CACHE_BYTES L1_CACHE_BYTES
+
+/*
+ * Put cacheline_aliged data to L1 data memory
+ */
+#ifdef CONFIG_CACHELINE_ALIGNED_L1
+#define __cacheline_aligned \
+ __attribute__((__aligned__(L1_CACHE_BYTES), \
+ __section__(".data_l1.cacheline_aligned")))
+#endif
+
+/*
+ * largest L1 which this arch supports
+ */
+#define L1_CACHE_SHIFT_MAX 5
+
+#endif
diff --git a/include/asm-blackfin/cacheflush.h b/include/asm-blackfin/cacheflush.h
new file mode 100644
index 0000000..e5e000d
--- /dev/null
+++ b/include/asm-blackfin/cacheflush.h
@@ -0,0 +1,90 @@
+/*
+ * File: include/asm-blackfin/cacheflush.h
+ * Based on: include/asm-m68knommu/cacheflush.h
+ * Author: LG Soft India
+ * Copyright (C) 2004 Analog Devices Inc.
+ * Created: Tue Sep 21 2004
+ * Description: Blackfin low-level cache routines adapted from the i386
+ * and PPC versions by Greg Ungerer (gerg@snapgear.com)
+ *
+ * Modified:
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.
+ * If not, write to the Free Software Foundation,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef _BLACKFIN_CACHEFLUSH_H
+#define _BLACKFIN_CACHEFLUSH_H
+
+#include <asm/cplb.h>
+
+extern void blackfin_icache_dcache_flush_range(unsigned int, unsigned int);
+extern void blackfin_icache_flush_range(unsigned int, unsigned int);
+extern void blackfin_dcache_flush_range(unsigned int, unsigned int);
+extern void blackfin_dcache_invalidate_range(unsigned int, unsigned int);
+extern void blackfin_dflush_page(void *);
+
+#define flush_dcache_mmap_lock(mapping) do { } while (0)
+#define flush_dcache_mmap_unlock(mapping) do { } while (0)
+#define flush_cache_mm(mm) do { } while (0)
+#define flush_cache_range(vma, start, end) do { } while (0)
+#define flush_cache_page(vma, vmaddr) do { } while (0)
+#define flush_cache_vmap(start, end) do { } while (0)
+#define flush_cache_vunmap(start, end) do { } while (0)
+
+static inline void flush_icache_range(unsigned start, unsigned end)
+{
+#if defined(CONFIG_BLKFIN_DCACHE) && defined(CONFIG_BLKFIN_CACHE)
+
+# if defined(CONFIG_BLKFIN_WT)
+ blackfin_icache_flush_range((start), (end));
+# else
+ blackfin_icache_dcache_flush_range((start), (end));
+# endif
+
+#else
+
+# if defined(CONFIG_BLKFIN_CACHE)
+ blackfin_icache_flush_range((start), (end));
+# endif
+# if defined(CONFIG_BLKFIN_DCACHE)
+ blackfin_dcache_flush_range((start), (end));
+# endif
+
+#endif
+}
+
+#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
+do { memcpy(dst, src, len); \
+ flush_icache_range ((unsigned) (dst), (unsigned) (dst) + (len)); \
+} while (0)
+#define copy_from_user_page(vma, page, vaddr, dst, src, len) memcpy(dst, src, len)
+
+#if defined(CONFIG_BLKFIN_DCACHE)
+# define invalidate_dcache_range(start,end) blackfin_dcache_invalidate_range((start), (end))
+#else
+# define invalidate_dcache_range(start,end) do { } while (0)
+#endif
+#if defined(CONFIG_BLKFIN_DCACHE) && defined(CONFIG_BLKFIN_WB)
+# define flush_dcache_range(start,end) blackfin_dcache_flush_range((start), (end))
+# define flush_dcache_page(page) blackfin_dflush_page(page_address(page))
+#else
+# define flush_dcache_range(start,end) do { } while (0)
+# define flush_dcache_page(page) do { } while (0)
+#endif
+
+#endif /* _BLACKFIN_CACHEFLUSH_H */
diff --git a/include/asm-blackfin/checksum.h b/include/asm-blackfin/checksum.h
new file mode 100644
index 0000000..2638f25
--- /dev/null
+++ b/include/asm-blackfin/checksum.h
@@ -0,0 +1,101 @@
+#ifndef _BFIN_CHECKSUM_H
+#define _BFIN_CHECKSUM_H
+
+/*
+ * MODIFIED FOR BFIN April 30, 2001 akbar.hussain@lineo.com
+ *
+ * computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit)
+ *
+ * returns a 32-bit number suitable for feeding into itself
+ * or csum_tcpudp_magic
+ *
+ * this function must be called with even lengths, except
+ * for the last fragment, which may be odd
+ *
+ * it's best to have buff aligned on a 32-bit boundary
+ */
+unsigned int csum_partial(const unsigned char *buff, int len, unsigned int sum);
+
+/*
+ * the same as csum_partial, but copies from src while it
+ * checksums
+ *
+ * here even more important to align src and dst on a 32-bit (or even
+ * better 64-bit) boundary
+ */
+
+unsigned int csum_partial_copy(const unsigned char *src, unsigned char *dst,
+ int len, int sum);
+
+/*
+ * the same as csum_partial_copy, but copies from user space.
+ *
+ * here even more important to align src and dst on a 32-bit (or even
+ * better 64-bit) boundary
+ */
+
+extern unsigned int csum_partial_copy_from_user(const unsigned char *src,
+ unsigned char *dst, int len,
+ int sum, int *csum_err);
+
+#define csum_partial_copy_nocheck(src, dst, len, sum) \
+ csum_partial_copy((src), (dst), (len), (sum))
+
+unsigned short ip_fast_csum(unsigned char *iph, unsigned int ihl);
+
+/*
+ * Fold a partial checksum
+ */
+
+static inline unsigned int csum_fold(unsigned int sum)
+{
+ while (sum >> 16)
+ sum = (sum & 0xffff) + (sum >> 16);
+ return ((~(sum << 16)) >> 16);
+}
+
+/*
+ * computes the checksum of the TCP/UDP pseudo-header
+ * returns a 16-bit checksum, already complemented
+ */
+
+static inline unsigned int
+csum_tcpudp_nofold(unsigned long saddr, unsigned long daddr, unsigned short len,
+ unsigned short proto, unsigned int sum)
+{
+
+ __asm__ ("%0 = %0 + %1;\n\t"
+ "CC = AC0;\n\t"
+ "if !CC jump 4;\n\t"
+ "%0 = %0 + %4;\n\t"
+ "%0 = %0 + %2;\n\t"
+ "CC = AC0;\n\t"
+ "if !CC jump 4;\n\t"
+ "%0 = %0 + %4;\n\t"
+ "%0 = %0 + %3;\n\t"
+ "CC = AC0;\n\t"
+ "if !CC jump 4;\n\t"
+ "%0 = %0 + %4;\n\t"
+ "NOP;\n\t"
+ : "=d" (sum)
+ : "d" (daddr), "d" (saddr), "d" ((ntohs(len)<<16)+proto*256), "d" (1), "0"(sum));
+
+ return (sum);
+}
+
+static inline unsigned short int
+csum_tcpudp_magic(unsigned long saddr, unsigned long daddr, unsigned short len,
+ unsigned short proto, unsigned int sum)
+{
+ return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum));
+}
+
+/*
+ * this routine is used for miscellaneous IP-like checksums, mainly
+ * in icmp.c
+ */
+
+extern unsigned short ip_compute_csum(const unsigned char *buff, int len);
+
+#endif /* _BFIN_CHECKSUM_H */
diff --git a/include/asm-blackfin/cplb.h b/include/asm-blackfin/cplb.h
new file mode 100644
index 0000000..e0dd56b
--- /dev/null
+++ b/include/asm-blackfin/cplb.h
@@ -0,0 +1,51 @@
+/************************************************************************
+ *
+ * cplb.h
+ *
+ * (c) Copyright 2002-2003 Analog Devices, Inc. All rights reserved.
+ *
+ ************************************************************************/
+
+/* Defines necessary for cplb initialisation routines. */
+
+#ifndef _CPLB_H
+#define _CPLB_H
+
+# include <asm/blackfin.h>
+
+#define CPLB_ENABLE_ICACHE_P 0
+#define CPLB_ENABLE_DCACHE_P 1
+#define CPLB_ENABLE_DCACHE2_P 2
+#define CPLB_ENABLE_CPLBS_P 3 /* Deprecated! */
+#define CPLB_ENABLE_ICPLBS_P 4
+#define CPLB_ENABLE_DCPLBS_P 5
+
+#define CPLB_ENABLE_ICACHE (1<<CPLB_ENABLE_ICACHE_P)
+#define CPLB_ENABLE_DCACHE (1<<CPLB_ENABLE_DCACHE_P)
+#define CPLB_ENABLE_DCACHE2 (1<<CPLB_ENABLE_DCACHE2_P)
+#define CPLB_ENABLE_CPLBS (1<<CPLB_ENABLE_CPLBS_P)
+#define CPLB_ENABLE_ICPLBS (1<<CPLB_ENABLE_ICPLBS_P)
+#define CPLB_ENABLE_DCPLBS (1<<CPLB_ENABLE_DCPLBS_P)
+#define CPLB_ENABLE_ANY_CPLBS CPLB_ENABLE_CPLBS | \
+ CPLB_ENABLE_ICPLBS | \
+ CPLB_ENABLE_DCPLBS
+
+#define CPLB_RELOADED 0x0000
+#define CPLB_NO_UNLOCKED 0x0001
+#define CPLB_NO_ADDR_MATCH 0x0002
+#define CPLB_PROT_VIOL 0x0003
+#define CPLB_UNKNOWN_ERR 0x0004
+
+#define CPLB_DEF_CACHE CPLB_L1_CHBL | CPLB_WT
+#define CPLB_CACHE_ENABLED CPLB_L1_CHBL | CPLB_DIRTY
+
+#define CPLB_ALL_ACCESS CPLB_SUPV_WR | CPLB_USER_RD | CPLB_USER_WR
+
+#define CPLB_I_PAGE_MGMT CPLB_LOCK | CPLB_VALID
+#define CPLB_D_PAGE_MGMT CPLB_LOCK | CPLB_ALL_ACCESS | CPLB_VALID
+#define CPLB_DNOCACHE CPLB_ALL_ACCESS | CPLB_VALID
+#define CPLB_DDOCACHE CPLB_DNOCACHE | CPLB_DEF_CACHE
+#define CPLB_INOCACHE CPLB_USER_RD | CPLB_VALID
+#define CPLB_IDOCACHE CPLB_INOCACHE | CPLB_L1_CHBL
+
+#endif /* _CPLB_H */
diff --git a/include/asm-blackfin/cplbinit.h b/include/asm-blackfin/cplbinit.h
new file mode 100644
index 0000000..3bad2d1
--- /dev/null
+++ b/include/asm-blackfin/cplbinit.h
@@ -0,0 +1,203 @@
+/*
+ * File: include/asm-blackfin/cplbinit.h
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <asm/blackfin.h>
+#include <asm/cplb.h>
+
+#define INITIAL_T 0x1
+#define SWITCH_T 0x2
+#define I_CPLB 0x4
+#define D_CPLB 0x8
+
+#define IN_KERNEL 1
+
+enum
+{ZERO_P, L1I_MEM, L1D_MEM, SDRAM_KERN , SDRAM_RAM_MTD, SDRAM_DMAZ, RES_MEM, ASYNC_MEM, L2_MEM};
+
+struct cplb_desc {
+ u32 start; /* start address */
+ u32 end; /* end address */
+ u32 psize; /* prefered size if any otherwise 1MB or 4MB*/
+ u16 attr;/* attributes */
+ u16 i_conf;/* I-CPLB DATA */
+ u16 d_conf;/* D-CPLB DATA */
+ u16 valid;/* valid */
+ const s8 name[30];/* name */
+};
+
+struct cplb_tab {
+ u_long *tab;
+ u16 pos;
+ u16 size;
+};
+
+u_long icplb_table[MAX_CPLBS+1];
+u_long dcplb_table[MAX_CPLBS+1];
+
+/* Till here we are discussing about the static memory management model.
+ * However, the operating envoronments commonly define more CPLB
+ * descriptors to cover the entire addressable memory than will fit into
+ * the available on-chip 16 CPLB MMRs. When this happens, the below table
+ * will be used which will hold all the potentially required CPLB descriptors
+ *
+ * This is how Page descriptor Table is implemented in uClinux/Blackfin.
+ */
+
+#ifdef CONFIG_CPLB_SWITCH_TAB_L1
+u_long ipdt_table[MAX_SWITCH_I_CPLBS+1]__attribute__((l1_data));
+u_long dpdt_table[MAX_SWITCH_D_CPLBS+1]__attribute__((l1_data));
+
+#ifdef CONFIG_CPLB_INFO
+u_long ipdt_swapcount_table[MAX_SWITCH_I_CPLBS]__attribute__((l1_data));
+u_long dpdt_swapcount_table[MAX_SWITCH_D_CPLBS]__attribute__((l1_data));
+#endif /* CONFIG_CPLB_INFO */
+
+#else
+
+u_long ipdt_table[MAX_SWITCH_I_CPLBS+1];
+u_long dpdt_table[MAX_SWITCH_D_CPLBS+1];
+
+#ifdef CONFIG_CPLB_INFO
+u_long ipdt_swapcount_table[MAX_SWITCH_I_CPLBS];
+u_long dpdt_swapcount_table[MAX_SWITCH_D_CPLBS];
+#endif /* CONFIG_CPLB_INFO */
+
+#endif /*CONFIG_CPLB_SWITCH_TAB_L1*/
+
+struct s_cplb {
+ struct cplb_tab init_i;
+ struct cplb_tab init_d;
+ struct cplb_tab switch_i;
+ struct cplb_tab switch_d;
+};
+
+#if defined(CONFIG_BLKFIN_DCACHE) || defined(CONFIG_BLKFIN_CACHE)
+static struct cplb_desc cplb_data[] = {
+ {
+ .start = 0,
+ .end = SIZE_4K,
+ .psize = SIZE_4K,
+ .attr = INITIAL_T | SWITCH_T | I_CPLB | D_CPLB,
+ .i_conf = SDRAM_OOPS,
+ .d_conf = SDRAM_OOPS,
+#if defined(CONFIG_DEBUG_HUNT_FOR_ZERO)
+ .valid = 1,
+#else
+ .valid = 0,
+#endif
+ .name = "ZERO Pointer Saveguard",
+ },
+ {
+ .start = L1_CODE_START,
+ .end = L1_CODE_START + L1_CODE_LENGTH,
+ .psize = SIZE_4M,
+ .attr = INITIAL_T | SWITCH_T | I_CPLB,
+ .i_conf = L1_IMEMORY,
+ .d_conf = 0,
+ .valid = 1,
+ .name = "L1 I-Memory",
+ },
+ {
+ .start = L1_DATA_A_START,
+ .end = L1_DATA_B_START + L1_DATA_B_LENGTH,
+ .psize = SIZE_4M,
+ .attr = INITIAL_T | SWITCH_T | D_CPLB,
+ .i_conf = 0,
+ .d_conf = L1_DMEMORY,
+#if ((L1_DATA_A_LENGTH > 0) || (L1_DATA_B_LENGTH > 0))
+ .valid = 1,
+#else
+ .valid = 0,
+#endif
+ .name = "L1 D-Memory",
+ },
+ {
+ .start = 0,
+ .end = 0, /* dynamic */
+ .psize = 0,
+ .attr = INITIAL_T | SWITCH_T | I_CPLB | D_CPLB,
+ .i_conf = SDRAM_IGENERIC,
+ .d_conf = SDRAM_DGENERIC,
+ .valid = 1,
+ .name = "SDRAM Kernel",
+ },
+ {
+ .start = 0, /* dynamic */
+ .end = 0, /* dynamic */
+ .psize = 0,
+ .attr = INITIAL_T | SWITCH_T | D_CPLB,
+ .i_conf = SDRAM_IGENERIC,
+ .d_conf = SDRAM_DNON_CHBL,
+ .valid = 1,
+ .name = "SDRAM RAM MTD",
+ },
+ {
+ .start = 0, /* dynamic */
+ .end = 0, /* dynamic */
+ .psize = SIZE_1M,
+ .attr = INITIAL_T | SWITCH_T | D_CPLB,
+ .d_conf = SDRAM_DNON_CHBL,
+ .valid = 1,//(DMA_UNCACHED_REGION > 0),
+ .name = "SDRAM Uncached DMA ZONE",
+ },
+ {
+ .start = 0, /* dynamic */
+ .end = 0, /* dynamic */
+ .psize = 0,
+ .attr = SWITCH_T | D_CPLB,
+ .i_conf = 0, /* dynamic */
+ .d_conf = 0, /* dynamic */
+ .valid = 1,
+ .name = "SDRAM Reserved Memory",
+ },
+ {
+ .start = ASYNC_BANK0_BASE,
+ .end = ASYNC_BANK3_BASE + ASYNC_BANK3_SIZE,
+ .psize = 0,
+ .attr = SWITCH_T | D_CPLB,
+ .d_conf = SDRAM_EBIU,
+ .valid = 1,
+ .name = "ASYNC Memory",
+ },
+ {
+#if defined(CONFIG_BF561)
+ .start = L2_SRAM,
+ .end = L2_SRAM_END,
+ .psize = SIZE_1M,
+ .attr = SWITCH_T | D_CPLB,
+ .i_conf = L2_MEMORY,
+ .d_conf = L2_MEMORY,
+ .valid = 1,
+#else
+ .valid = 0,
+#endif
+ .name = "L2 Memory",
+ }
+};
+#endif
diff --git a/include/asm-blackfin/cpumask.h b/include/asm-blackfin/cpumask.h
new file mode 100644
index 0000000..b20a8e9
--- /dev/null
+++ b/include/asm-blackfin/cpumask.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_BLACKFIN_CPUMASK_H
+#define _ASM_BLACKFIN_CPUMASK_H
+
+#include <asm-generic/cpumask.h>
+
+#endif /* _ASM_BLACKFIN_CPUMASK_H */
diff --git a/include/asm-blackfin/cputime.h b/include/asm-blackfin/cputime.h
new file mode 100644
index 0000000..2b19705
--- /dev/null
+++ b/include/asm-blackfin/cputime.h
@@ -0,0 +1,6 @@
+#ifndef __BLACKFIN_CPUTIME_H
+#define __BLACKFIN_CPUTIME_H
+
+#include <asm-generic/cputime.h>
+
+#endif /* __BLACKFIN_CPUTIME_H */
diff --git a/include/asm-blackfin/current.h b/include/asm-blackfin/current.h
new file mode 100644
index 0000000..31918d2
--- /dev/null
+++ b/include/asm-blackfin/current.h
@@ -0,0 +1,23 @@
+#ifndef _BLACKFIN_CURRENT_H
+#define _BLACKFIN_CURRENT_H
+/*
+ * current.h
+ * (C) Copyright 2000, Lineo, David McCullough <davidm@lineo.com>
+ *
+ * rather than dedicate a register (as the m68k source does), we
+ * just keep a global, we should probably just change it all to be
+ * current and lose _current_task.
+ */
+#include <linux/thread_info.h>
+
+struct task_struct;
+
+static inline struct task_struct *get_current(void) __attribute__ ((__const__));
+static inline struct task_struct *get_current(void)
+{
+ return (current_thread_info()->task);
+}
+
+#define current (get_current())
+
+#endif /* _BLACKFIN_CURRENT_H */
diff --git a/include/asm-blackfin/delay.h b/include/asm-blackfin/delay.h
new file mode 100644
index 0000000..52e7a10
--- /dev/null
+++ b/include/asm-blackfin/delay.h
@@ -0,0 +1,44 @@
+#ifndef _BLACKFIN_DELAY_H
+#define _BLACKFIN_DELAY_H
+
+static inline void __delay(unsigned long loops)
+{
+
+/* FIXME: Currently the assembler doesn't recognize Loop Register Clobbers,
+ uncomment this as soon those are implemented */
+/*
+ __asm__ __volatile__ ( "\t LSETUP (1f,1f) LC0= %0\n\t"
+ "1:\t NOP;\n\t"
+ : :"a" (loops)
+ : "LT0","LB0","LC0");
+
+*/
+
+ __asm__ __volatile__("[--SP] = LC0;\n\t"
+ "[--SP] = LT0;\n\t"
+ "[--SP] = LB0;\n\t"
+ "LSETUP (1f,1f) LC0 = %0;\n\t"
+ "1:\t NOP;\n\t"
+ "LB0 = [SP++];\n\t"
+ "LT0 = [SP++];\n\t"
+ "LC0 = [SP++];\n"
+ :
+ :"a" (loops));
+}
+
+#include <linux/param.h> /* needed for HZ */
+
+/*
+ * Use only for very small delays ( < 1 msec). Should probably use a
+ * lookup table, really, as the multiplications take much too long with
+ * short delays. This is a "reasonable" implementation, though (and the
+ * first constant multiplications gets optimized away if the delay is
+ * a constant)
+ */
+static inline void udelay(unsigned long usecs)
+{
+ extern unsigned long loops_per_jiffy;
+ __delay(usecs * loops_per_jiffy / (1000000 / HZ));
+}
+
+#endif /* defined(_BLACKFIN_DELAY_H) */
diff --git a/include/asm-blackfin/device.h b/include/asm-blackfin/device.h
new file mode 100644
index 0000000..d8f9872
--- /dev/null
+++ b/include/asm-blackfin/device.h
@@ -0,0 +1,7 @@
+/*
+ * Arch specific extensions to struct device
+ *
+ * This file is released under the GPLv2
+ */
+#include <asm-generic/device.h>
+
diff --git a/include/asm-blackfin/div64.h b/include/asm-blackfin/div64.h
new file mode 100644
index 0000000..6cd978c
--- /dev/null
+++ b/include/asm-blackfin/div64.h
@@ -0,0 +1 @@
+#include <asm-generic/div64.h>
diff --git a/include/asm-blackfin/dma-mapping.h b/include/asm-blackfin/dma-mapping.h
new file mode 100644
index 0000000..7a77d7f
--- /dev/null
+++ b/include/asm-blackfin/dma-mapping.h
@@ -0,0 +1,66 @@
+#ifndef _BLACKFIN_DMA_MAPPING_H
+#define _BLACKFIN_DMA_MAPPING_H
+
+#include <asm/scatterlist.h>
+
+void dma_alloc_init(unsigned long start, unsigned long end);
+void *dma_alloc_coherent(struct device *dev, size_t size,
+ dma_addr_t *dma_handle, gfp_t gfp);
+void dma_free_coherent(struct device *dev, size_t size, void *vaddr,
+ dma_addr_t dma_handle);
+
+/*
+ * Now for the API extensions over the pci_ one
+ */
+#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
+#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
+
+/*
+ * Map a single buffer of the indicated size for DMA in streaming mode.
+ * The 32-bit bus address to use is returned.
+ *
+ * Once the device is given the dma address, the device owns this memory
+ * until either pci_unmap_single or pci_dma_sync_single is performed.
+ */
+extern dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size,
+ enum dma_data_direction direction);
+
+/*
+ * Unmap a single streaming mode DMA translation. The dma_addr and size
+ * must match what was provided for in a previous pci_map_single call. All
+ * other usages are undefined.
+ *
+ * After this call, reads by the cpu to the buffer are guarenteed to see
+ * whatever the device wrote there.
+ */
+extern void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
+ enum dma_data_direction direction);
+
+/*
+ * Map a set of buffers described by scatterlist in streaming
+ * mode for DMA. This is the scather-gather version of the
+ * above pci_map_single interface. Here the scatter gather list
+ * elements are each tagged with the appropriate dma address
+ * and length. They are obtained via sg_dma_{address,length}(SG).
+ *
+ * NOTE: An implementation may be able to use a smaller number of
+ * DMA address/length pairs than there are SG table elements.
+ * (for example via virtual mapping capabilities)
+ * The routine returns the number of addr/length pairs actually
+ * used, at most nents.
+ *
+ * Device ownership issues as mentioned above for pci_map_single are
+ * the same here.
+ */
+extern int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
+ enum dma_data_direction direction);
+
+/*
+ * Unmap a set of streaming mode DMA translations.
+ * Again, cpu read rules concerning calls here are the same as for
+ * pci_unmap_single() above.
+ */
+extern void dma_unmap_sg(struct device *dev, struct scatterlist *sg,
+ int nhwentries, enum dma_data_direction direction);
+
+#endif /* _BLACKFIN_DMA_MAPPING_H */
diff --git a/include/asm-blackfin/dma.h b/include/asm-blackfin/dma.h
new file mode 100644
index 0000000..be0d913
--- /dev/null
+++ b/include/asm-blackfin/dma.h
@@ -0,0 +1,188 @@
+/*
+ * File: include/asm-blackfin/simple_bf533_dma.h
+ * Based on: none - original work
+ * Author: LG Soft India
+ * Copyright (C) 2004-2005 Analog Devices Inc.
+ * Created: Tue Sep 21 2004
+ * Description: This file contains the major Data structures and constants
+ * used for DMA Implementation in BF533
+ * Modified:
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.
+ * If not, write to the Free Software Foundation,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef _BLACKFIN_DMA_H_
+#define _BLACKFIN_DMA_H_
+
+#include <asm/io.h>
+#include <linux/slab.h>
+#include <asm/irq.h>
+#include <asm/signal.h>
+#include <asm/semaphore.h>
+
+#include <linux/kernel.h>
+#include <asm/mach/dma.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <asm/blackfin.h>
+
+#define MAX_DMA_ADDRESS PAGE_OFFSET
+
+/*****************************************************************************
+* Generic DMA Declarations
+*
+****************************************************************************/
+enum dma_chan_status {
+ DMA_CHANNEL_FREE,
+ DMA_CHANNEL_REQUESTED,
+ DMA_CHANNEL_ENABLED,
+};
+
+/*-------------------------
+ * config reg bits value
+ *-------------------------*/
+#define DATA_SIZE_8 0
+#define DATA_SIZE_16 1
+#define DATA_SIZE_32 2
+
+#define DMA_FLOW_STOP 0
+#define DMA_FLOW_AUTO 1
+#define DMA_FLOW_ARRAY 4
+#define DMA_FLOW_SMALL 6
+#define DMA_FLOW_LARGE 7
+
+#define DIMENSION_LINEAR 0
+#define DIMENSION_2D 1
+
+#define DIR_READ 0
+#define DIR_WRITE 1
+
+#define INTR_DISABLE 0
+#define INTR_ON_BUF 2
+#define INTR_ON_ROW 3
+
+struct dmasg {
+ unsigned long next_desc_addr;
+ unsigned long start_addr;
+ unsigned short cfg;
+ unsigned short x_count;
+ short x_modify;
+ unsigned short y_count;
+ short y_modify;
+} __attribute__((packed));
+
+struct dma_register {
+ unsigned long next_desc_ptr; /* DMA Next Descriptor Pointer register */
+ unsigned long start_addr; /* DMA Start address register */
+
+ unsigned short cfg; /* DMA Configuration register */
+ unsigned short dummy1; /* DMA Configuration register */
+
+ unsigned long reserved;
+
+ unsigned short x_count; /* DMA x_count register */
+ unsigned short dummy2;
+
+ short x_modify; /* DMA x_modify register */
+ unsigned short dummy3;
+
+ unsigned short y_count; /* DMA y_count register */
+ unsigned short dummy4;
+
+ short y_modify; /* DMA y_modify register */
+ unsigned short dummy5;
+
+ unsigned long curr_desc_ptr; /* DMA Current Descriptor Pointer
+ register */
+ unsigned short curr_addr_ptr_lo; /* DMA Current Address Pointer
+ register */
+ unsigned short curr_addr_ptr_hi; /* DMA Current Address Pointer
+ register */
+ unsigned short irq_status; /* DMA irq status register */
+ unsigned short dummy6;
+
+ unsigned short peripheral_map; /* DMA peripheral map register */
+ unsigned short dummy7;
+
+ unsigned short curr_x_count; /* DMA Current x-count register */
+ unsigned short dummy8;
+
+ unsigned long reserved2;
+
+ unsigned short curr_y_count; /* DMA Current y-count register */
+ unsigned short dummy9;
+
+ unsigned long reserved3;
+
+};
+
+typedef irqreturn_t(*dma_interrupt_t) (int irq, void *dev_id);
+
+struct dma_channel {
+ struct mutex dmalock;
+ char *device_id;
+ enum dma_chan_status chan_status;
+ struct dma_register *regs;
+ struct dmasg *sg; /* large mode descriptor */
+ unsigned int ctrl_num; /* controller number */
+ dma_interrupt_t irq_callback;
+ void *data;
+ unsigned int dma_enable_flag;
+ unsigned int loopback_flag;
+};
+
+/*******************************************************************************
+* DMA API's
+*******************************************************************************/
+/* functions to set register mode */
+void set_dma_start_addr(unsigned int channel, unsigned long addr);
+void set_dma_next_desc_addr(unsigned int channel, unsigned long addr);
+void set_dma_x_count(unsigned int channel, unsigned short x_count);
+void set_dma_x_modify(unsigned int channel, short x_modify);
+void set_dma_y_count(unsigned int channel, unsigned short y_count);
+void set_dma_y_modify(unsigned int channel, short y_modify);
+void set_dma_config(unsigned int channel, unsigned short config);
+unsigned short set_bfin_dma_config(char direction, char flow_mode,
+ char intr_mode, char dma_mode, char width);
+
+/* get curr status for polling */
+unsigned short get_dma_curr_irqstat(unsigned int channel);
+unsigned short get_dma_curr_xcount(unsigned int channel);
+unsigned short get_dma_curr_ycount(unsigned int channel);
+
+/* set large DMA mode descriptor */
+void set_dma_sg(unsigned int channel, struct dmasg *sg, int nr_sg);
+
+/* check if current channel is in use */
+int dma_channel_active(unsigned int channel);
+
+/* common functions must be called in any mode */
+void free_dma(unsigned int channel);
+int dma_channel_active(unsigned int channel); /* check if a channel is in use */
+void disable_dma(unsigned int channel);
+void enable_dma(unsigned int channel);
+int request_dma(unsigned int channel, char *device_id);
+int set_dma_callback(unsigned int channel, dma_interrupt_t callback,
+ void *data);
+void dma_disable_irq(unsigned int channel);
+void dma_enable_irq(unsigned int channel);
+void clear_dma_irqstat(unsigned int channel);
+void *dma_memcpy(void *dest, const void *src, size_t count);
+void *safe_dma_memcpy(void *dest, const void *src, size_t count);
+
+#endif
diff --git a/include/asm-blackfin/dpmc.h b/include/asm-blackfin/dpmc.h
new file mode 100644
index 0000000..f162edb
--- /dev/null
+++ b/include/asm-blackfin/dpmc.h
@@ -0,0 +1,70 @@
+/*
+ * include/asm-blackfin/dpmc.h - Miscellaneous IOCTL commands for Dynamic Power
+ * Management Controller Driver.
+ * Copyright (C) 2004 Analog Device Inc.
+ *
+ */
+#ifndef _BLACKFIN_DPMC_H_
+#define _BLACKFIN_DPMC_H_
+
+#define SLEEP_MODE 1
+#define DEEP_SLEEP_MODE 2
+#define ACTIVE_PLL_DISABLED 3
+#define FULLON_MODE 4
+#define ACTIVE_PLL_ENABLED 5
+#define HIBERNATE_MODE 6
+
+#define IOCTL_FULL_ON_MODE _IO('s', 0xA0)
+#define IOCTL_ACTIVE_MODE _IO('s', 0xA1)
+#define IOCTL_SLEEP_MODE _IO('s', 0xA2)
+#define IOCTL_DEEP_SLEEP_MODE _IO('s', 0xA3)
+#define IOCTL_HIBERNATE_MODE _IO('s', 0xA4)
+#define IOCTL_CHANGE_FREQUENCY _IOW('s', 0xA5, unsigned long)
+#define IOCTL_CHANGE_VOLTAGE _IOW('s', 0xA6, unsigned long)
+#define IOCTL_SET_CCLK _IOW('s', 0xA7, unsigned long)
+#define IOCTL_SET_SCLK _IOW('s', 0xA8, unsigned long)
+#define IOCTL_GET_PLLSTATUS _IOW('s', 0xA9, unsigned long)
+#define IOCTL_GET_CORECLOCK _IOW('s', 0xAA, unsigned long)
+#define IOCTL_GET_SYSTEMCLOCK _IOW('s', 0xAB, unsigned long)
+#define IOCTL_GET_VCO _IOW('s', 0xAC, unsigned long)
+#define IOCTL_DISABLE_WDOG_TIMER _IO('s', 0xAD)
+#define IOCTL_UNMASK_WDOG_WAKEUP_EVENT _IO('s',0xAE)
+#define IOCTL_PROGRAM_WDOG_TIMER _IOW('s',0xAF,unsigned long)
+#define IOCTL_CLEAR_WDOG_WAKEUP_EVENT _IO('s',0xB0)
+#define IOCTL_SLEEP_DEEPER_MODE _IO('s',0xB1)
+
+#define DPMC_MINOR 254
+
+#define ON 0
+#define OFF 1
+
+#ifdef __KERNEL__
+
+unsigned long calc_volt(void);
+int calc_vlev(int vlt);
+unsigned long change_voltage(unsigned long volt);
+int calc_msel(int vco_hz);
+unsigned long change_frequency(unsigned long vco_mhz);
+int set_pll_div(unsigned short sel, unsigned char flag);
+int get_vco(void);
+unsigned long change_system_clock(unsigned long clock);
+unsigned long change_core_clock(unsigned long clock);
+unsigned long get_pll_status(void);
+void change_baud(int baud);
+void fullon_mode(void);
+void active_mode(void);
+void sleep_mode(u32 sic_iwr);
+void deep_sleep(u32 sic_iwr);
+void hibernate_mode(u32 sic_iwr);
+void sleep_deeper(u32 sic_iwr);
+void program_wdog_timer(unsigned long);
+void unmask_wdog_wakeup_evt(void);
+void clear_wdog_wakeup_evt(void);
+void disable_wdog_timer(void);
+
+extern unsigned long get_cclk(void);
+extern unsigned long get_sclk(void);
+
+#endif /* __KERNEL__ */
+
+#endif /*_BLACKFIN_DPMC_H_*/
diff --git a/include/asm-blackfin/elf.h b/include/asm-blackfin/elf.h
new file mode 100644
index 0000000..5264b55
--- /dev/null
+++ b/include/asm-blackfin/elf.h
@@ -0,0 +1,127 @@
+/* Changes made by LG Soft Oct 2004*/
+
+#ifndef __ASMBFIN_ELF_H
+#define __ASMBFIN_ELF_H
+
+/*
+ * ELF register definitions..
+ */
+
+#include <asm/ptrace.h>
+#include <asm/user.h>
+
+/* Processor specific flags for the ELF header e_flags field. */
+#define EF_BFIN_PIC 0x00000001 /* -fpic */
+#define EF_BFIN_FDPIC 0x00000002 /* -mfdpic */
+#define EF_BFIN_CODE_IN_L1 0x00000010 /* --code-in-l1 */
+#define EF_BFIN_DATA_IN_L1 0x00000020 /* --data-in-l1 */
+
+typedef unsigned long elf_greg_t;
+
+#define ELF_NGREG (sizeof(struct user_regs_struct) / sizeof(elf_greg_t))
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+typedef struct user_bfinfp_struct elf_fpregset_t;
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch(x) ((x)->e_machine == EM_BLACKFIN)
+
+#define elf_check_fdpic(x) ((x)->e_flags & EF_BFIN_FDPIC /* && !((x)->e_flags & EF_FRV_NON_PIC_RELOCS) */)
+#define elf_check_const_displacement(x) ((x)->e_flags & EF_BFIN_PIC)
+
+/* EM_BLACKFIN defined in linux/elf.h */
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_CLASS ELFCLASS32
+#define ELF_DATA ELFDATA2LSB
+#define ELF_ARCH EM_BLACKFIN
+
+#define ELF_PLAT_INIT(_r) _r->p1 = 0
+
+#define ELF_FDPIC_PLAT_INIT(_regs, _exec_map_addr, _interp_map_addr, _dynamic_addr) \
+do { \
+ _regs->r7 = 0; \
+ _regs->p0 = _exec_map_addr; \
+ _regs->p1 = _interp_map_addr; \
+ _regs->p2 = _dynamic_addr; \
+} while(0)
+
+#define USE_ELF_CORE_DUMP
+#define ELF_FDPIC_CORE_EFLAGS EF_BFIN_FDPIC
+#define ELF_EXEC_PAGESIZE 4096
+
+#define R_unused0 0 /* relocation type 0 is not defined */
+#define R_pcrel5m2 1 /*LSETUP part a */
+#define R_unused1 2 /* relocation type 2 is not defined */
+#define R_pcrel10 3 /* type 3, if cc jump <target> */
+#define R_pcrel12_jump 4 /* type 4, jump <target> */
+#define R_rimm16 5 /* type 0x5, rN = <target> */
+#define R_luimm16 6 /* # 0x6, preg.l=<target> Load imm 16 to lower half */
+#define R_huimm16 7 /* # 0x7, preg.h=<target> Load imm 16 to upper half */
+#define R_pcrel12_jump_s 8 /* # 0x8 jump.s <target> */
+#define R_pcrel24_jump_x 9 /* # 0x9 jump.x <target> */
+#define R_pcrel24 10 /* # 0xa call <target> , not expandable */
+#define R_unusedb 11 /* # 0xb not generated */
+#define R_unusedc 12 /* # 0xc not used */
+#define R_pcrel24_jump_l 13 /*0xd jump.l <target> */
+#define R_pcrel24_call_x 14 /* 0xE, call.x <target> if <target> is above 24 bit limit call through P1 */
+#define R_var_eq_symb 15 /* 0xf, linker should treat it same as 0x12 */
+#define R_byte_data 16 /* 0x10, .byte var = symbol */
+#define R_byte2_data 17 /* 0x11, .byte2 var = symbol */
+#define R_byte4_data 18 /* 0x12, .byte4 var = symbol and .var var=symbol */
+#define R_pcrel11 19 /* 0x13, lsetup part b */
+#define R_unused14 20 /* 0x14, undefined */
+#define R_unused15 21 /* not generated by VDSP 3.5 */
+
+/* arithmetic relocations */
+#define R_push 0xE0
+#define R_const 0xE1
+#define R_add 0xE2
+#define R_sub 0xE3
+#define R_mult 0xE4
+#define R_div 0xE5
+#define R_mod 0xE6
+#define R_lshift 0xE7
+#define R_rshift 0xE8
+#define R_and 0xE9
+#define R_or 0xEA
+#define R_xor 0xEB
+#define R_land 0xEC
+#define R_lor 0xED
+#define R_len 0xEE
+#define R_neg 0xEF
+#define R_comp 0xF0
+#define R_page 0xF1
+#define R_hwpage 0xF2
+#define R_addr 0xF3
+
+/* This is the location that an ET_DYN program is loaded if exec'ed. Typical
+ use of this is to invoke "./ld.so someprog" to test out a new version of
+ the loader. We need to make sure that it is out of the way of the program
+ that it will "exec", and that there is sufficient room for the brk. */
+
+#define ELF_ET_DYN_BASE 0xD0000000UL
+
+#define ELF_CORE_COPY_REGS(pr_reg, regs) \
+ memcpy((char *) &pr_reg, (char *)regs, \
+ sizeof(struct pt_regs));
+
+/* This yields a mask that user programs can use to figure out what
+ instruction set this cpu supports. */
+
+#define ELF_HWCAP (0)
+
+/* This yields a string that ld.so will use to load implementation
+ specific libraries for optimization. This is more specific in
+ intent than poking at uname or /proc/cpuinfo. */
+
+#define ELF_PLATFORM (NULL)
+
+#ifdef __KERNEL__
+#define SET_PERSONALITY(ex, ibcs2) set_personality((ibcs2)?PER_SVR4:PER_LINUX)
+#endif
+
+#endif
diff --git a/include/asm-blackfin/emergency-restart.h b/include/asm-blackfin/emergency-restart.h
new file mode 100644
index 0000000..27f6c78
--- /dev/null
+++ b/include/asm-blackfin/emergency-restart.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_EMERGENCY_RESTART_H
+#define _ASM_EMERGENCY_RESTART_H
+
+#include <asm-generic/emergency-restart.h>
+
+#endif /* _ASM_EMERGENCY_RESTART_H */
diff --git a/include/asm-blackfin/entry.h b/include/asm-blackfin/entry.h
new file mode 100644
index 0000000..562c6d3
--- /dev/null
+++ b/include/asm-blackfin/entry.h
@@ -0,0 +1,56 @@
+#ifndef __BFIN_ENTRY_H
+#define __BFIN_ENTRY_H
+
+#include <asm/setup.h>
+#include <asm/page.h>
+
+#ifdef __ASSEMBLY__
+
+#define LFLUSH_I_AND_D 0x00000808
+#define LSIGTRAP 5
+
+/* process bits for task_struct.flags */
+#define PF_TRACESYS_OFF 3
+#define PF_TRACESYS_BIT 5
+#define PF_PTRACED_OFF 3
+#define PF_PTRACED_BIT 4
+#define PF_DTRACE_OFF 1
+#define PF_DTRACE_BIT 5
+
+/* This one is used for exceptions, emulation, and NMI. It doesn't push
+ RETI and doesn't do cli. */
+#define SAVE_ALL_SYS save_context_no_interrupts
+/* This is used for all normal interrupts. It saves a minimum of registers
+ to the stack, loads the IRQ number, and jumps to common code. */
+#define INTERRUPT_ENTRY(N) \
+ [--sp] = SYSCFG; \
+ \
+ [--sp] = P0; /*orig_p0*/ \
+ [--sp] = R0; /*orig_r0*/ \
+ [--sp] = (R7:0,P5:0); \
+ R0 = (N); \
+ jump __common_int_entry;
+
+/* For timer interrupts, we need to save IPEND, since the user_mode
+ macro accesses it to determine where to account time. */
+#define TIMER_INTERRUPT_ENTRY(N) \
+ [--sp] = SYSCFG; \
+ \
+ [--sp] = P0; /*orig_p0*/ \
+ [--sp] = R0; /*orig_r0*/ \
+ [--sp] = (R7:0,P5:0); \
+ p0.l = lo(IPEND); \
+ p0.h = hi(IPEND); \
+ r1 = [p0]; \
+ R0 = (N); \
+ jump __common_int_entry;
+
+/* This one pushes RETI without using CLI. Interrupts are enabled. */
+#define SAVE_CONTEXT_SYSCALL save_context_syscall
+#define SAVE_CONTEXT save_context_with_interrupts
+
+#define RESTORE_ALL_SYS restore_context_no_interrupts
+#define RESTORE_CONTEXT restore_context_with_interrupts
+
+#endif /* __ASSEMBLY__ */
+#endif /* __BFIN_ENTRY_H */
diff --git a/include/asm-blackfin/errno.h b/include/asm-blackfin/errno.h
new file mode 100644
index 0000000..164e4f3
--- /dev/null
+++ b/include/asm-blackfin/errno.h
@@ -0,0 +1,6 @@
+#ifndef _BFIN_ERRNO_H
+#define _BFIN_ERRNO_H
+
+#include<asm-generic/errno.h>
+
+#endif /* _BFIN_ERRNO_H */
diff --git a/include/asm-blackfin/fcntl.h b/include/asm-blackfin/fcntl.h
new file mode 100644
index 0000000..9c40371
--- /dev/null
+++ b/include/asm-blackfin/fcntl.h
@@ -0,0 +1,13 @@
+#ifndef _BFIN_FCNTL_H
+#define _BFIN_FCNTL_H
+
+/* open/fcntl - O_SYNC is only implemented on blocks devices and on files
+ located on an ext2 file system */
+#define O_DIRECTORY 040000 /* must be a directory */
+#define O_NOFOLLOW 0100000 /* don't follow links */
+#define O_DIRECT 0200000 /* direct disk access hint - currently ignored */
+#define O_LARGEFILE 0400000
+
+#include <asm-generic/fcntl.h>
+
+#endif
diff --git a/include/asm-blackfin/flat.h b/include/asm-blackfin/flat.h
new file mode 100644
index 0000000..e70074e
--- /dev/null
+++ b/include/asm-blackfin/flat.h
@@ -0,0 +1,58 @@
+/*
+ * include/asm-blackfin/flat.h -- uClinux flat-format executables
+ *
+ * Copyright (C) 2003,
+ *
+ */
+
+#ifndef __BLACKFIN_FLAT_H__
+#define __BLACKFIN_FLAT_H__
+
+#include <asm/unaligned.h>
+
+#define flat_stack_align(sp) /* nothing needed */
+#define flat_argvp_envp_on_stack() 0
+#define flat_old_ram_flag(flags) (flags)
+
+extern unsigned long bfin_get_addr_from_rp (unsigned long *ptr,
+ unsigned long relval,
+ unsigned long flags,
+ unsigned long *persistent);
+
+extern void bfin_put_addr_at_rp(unsigned long *ptr, unsigned long addr,
+ unsigned long relval);
+
+/* The amount by which a relocation can exceed the program image limits
+ without being regarded as an error. */
+
+#define flat_reloc_valid(reloc, size) ((reloc) <= (size))
+
+#define flat_get_addr_from_rp(rp, relval, flags, persistent) \
+ bfin_get_addr_from_rp(rp, relval, flags, persistent)
+#define flat_put_addr_at_rp(rp, val, relval) \
+ bfin_put_addr_at_rp(rp, val, relval)
+
+/* Convert a relocation entry into an address. */
+static inline unsigned long
+flat_get_relocate_addr (unsigned long relval)
+{
+ return relval & 0x03ffffff; /* Mask out top 6 bits */
+}
+
+static inline int flat_set_persistent(unsigned long relval,
+ unsigned long *persistent)
+{
+ int type = (relval >> 26) & 7;
+ if (type == 3) {
+ *persistent = relval << 16;
+ return 1;
+ }
+ return 0;
+}
+
+static inline int flat_addr_absolute(unsigned long relval)
+{
+ return (relval & (1 << 29)) != 0;
+}
+
+#endif /* __BLACKFIN_FLAT_H__ */
diff --git a/include/asm-blackfin/futex.h b/include/asm-blackfin/futex.h
new file mode 100644
index 0000000..6a332a9
--- /dev/null
+++ b/include/asm-blackfin/futex.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_FUTEX_H
+#define _ASM_FUTEX_H
+
+#include <asm-generic/futex.h>
+
+#endif
diff --git a/include/asm-blackfin/gpio.h b/include/asm-blackfin/gpio.h
new file mode 100644
index 0000000..d16fe3c
--- /dev/null
+++ b/include/asm-blackfin/gpio.h
@@ -0,0 +1,367 @@
+/*
+ * File: arch/blackfin/kernel/bfin_gpio.h
+ * Based on:
+ * Author: Michael Hennerich (hennerich@blackfin.uclinux.org)
+ *
+ * Created:
+ * Description:
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/*
+* Number BF537/6/4 BF561 BF533/2/1
+*
+* GPIO_0 PF0 PF0 PF0
+* GPIO_1 PF1 PF1 PF1
+* GPIO_2 PF2 PF2 PF2
+* GPIO_3 PF3 PF3 PF3
+* GPIO_4 PF4 PF4 PF4
+* GPIO_5 PF5 PF5 PF5
+* GPIO_6 PF6 PF6 PF6
+* GPIO_7 PF7 PF7 PF7
+* GPIO_8 PF8 PF8 PF8
+* GPIO_9 PF9 PF9 PF9
+* GPIO_10 PF10 PF10 PF10
+* GPIO_11 PF11 PF11 PF11
+* GPIO_12 PF12 PF12 PF12
+* GPIO_13 PF13 PF13 PF13
+* GPIO_14 PF14 PF14 PF14
+* GPIO_15 PF15 PF15 PF15
+* GPIO_16 PG0 PF16
+* GPIO_17 PG1 PF17
+* GPIO_18 PG2 PF18
+* GPIO_19 PG3 PF19
+* GPIO_20 PG4 PF20
+* GPIO_21 PG5 PF21
+* GPIO_22 PG6 PF22
+* GPIO_23 PG7 PF23
+* GPIO_24 PG8 PF24
+* GPIO_25 PG9 PF25
+* GPIO_26 PG10 PF26
+* GPIO_27 PG11 PF27
+* GPIO_28 PG12 PF28
+* GPIO_29 PG13 PF29
+* GPIO_30 PG14 PF30
+* GPIO_31 PG15 PF31
+* GPIO_32 PH0 PF32
+* GPIO_33 PH1 PF33
+* GPIO_34 PH2 PF34
+* GPIO_35 PH3 PF35
+* GPIO_36 PH4 PF36
+* GPIO_37 PH5 PF37
+* GPIO_38 PH6 PF38
+* GPIO_39 PH7 PF39
+* GPIO_40 PH8 PF40
+* GPIO_41 PH9 PF41
+* GPIO_42 PH10 PF42
+* GPIO_43 PH11 PF43
+* GPIO_44 PH12 PF44
+* GPIO_45 PH13 PF45
+* GPIO_46 PH14 PF46
+* GPIO_47 PH15 PF47
+*/
+
+#ifndef __ARCH_BLACKFIN_GPIO_H__
+#define __ARCH_BLACKFIN_GPIO_H__
+
+#define gpio_bank(x) ((x) >> 4)
+#define gpio_bit(x) (1<<((x) & 0xF))
+#define gpio_sub_n(x) ((x) & 0xF)
+
+#define GPIO_BANKSIZE 16
+
+#define GPIO_0 0
+#define GPIO_1 1
+#define GPIO_2 2
+#define GPIO_3 3
+#define GPIO_4 4
+#define GPIO_5 5
+#define GPIO_6 6
+#define GPIO_7 7
+#define GPIO_8 8
+#define GPIO_9 9
+#define GPIO_10 10
+#define GPIO_11 11
+#define GPIO_12 12
+#define GPIO_13 13
+#define GPIO_14 14
+#define GPIO_15 15
+#define GPIO_16 16
+#define GPIO_17 17
+#define GPIO_18 18
+#define GPIO_19 19
+#define GPIO_20 20
+#define GPIO_21 21
+#define GPIO_22 22
+#define GPIO_23 23
+#define GPIO_24 24
+#define GPIO_25 25
+#define GPIO_26 26
+#define GPIO_27 27
+#define GPIO_28 28
+#define GPIO_29 29
+#define GPIO_30 30
+#define GPIO_31 31
+#define GPIO_32 32
+#define GPIO_33 33
+#define GPIO_34 34
+#define GPIO_35 35
+#define GPIO_36 36
+#define GPIO_37 37
+#define GPIO_38 38
+#define GPIO_39 39
+#define GPIO_40 40
+#define GPIO_41 41
+#define GPIO_42 42
+#define GPIO_43 43
+#define GPIO_44 44
+#define GPIO_45 45
+#define GPIO_46 46
+#define GPIO_47 47
+
+
+#define PERIPHERAL_USAGE 1
+#define GPIO_USAGE 0
+
+#ifdef BF533_FAMILY
+#define MAX_BLACKFIN_GPIOS 16
+#endif
+
+#ifdef BF537_FAMILY
+#define MAX_BLACKFIN_GPIOS 48
+#define PORT_F 0
+#define PORT_G 1
+#define PORT_H 2
+#define PORT_J 3
+
+#define GPIO_PF0 0
+#define GPIO_PF1 1
+#define GPIO_PF2 2
+#define GPIO_PF3 3
+#define GPIO_PF4 4
+#define GPIO_PF5 5
+#define GPIO_PF6 6
+#define GPIO_PF7 7
+#define GPIO_PF8 8
+#define GPIO_PF9 9
+#define GPIO_PF10 10
+#define GPIO_PF11 11
+#define GPIO_PF12 12
+#define GPIO_PF13 13
+#define GPIO_PF14 14
+#define GPIO_PF15 15
+#define GPIO_PG0 16
+#define GPIO_PG1 17
+#define GPIO_PG2 18
+#define GPIO_PG3 19
+#define GPIO_PG4 20
+#define GPIO_PG5 21
+#define GPIO_PG6 22
+#define GPIO_PG7 23
+#define GPIO_PG8 24
+#define GPIO_PG9 25
+#define GPIO_PG10 26
+#define GPIO_PG11 27
+#define GPIO_PG12 28
+#define GPIO_PG13 29
+#define GPIO_PG14 30
+#define GPIO_PG15 31
+#define GPIO_PH0 32
+#define GPIO_PH1 33
+#define GPIO_PH2 34
+#define GPIO_PH3 35
+#define GPIO_PH4 36
+#define GPIO_PH5 37
+#define GPIO_PH6 38
+#define GPIO_PH7 39
+#define GPIO_PH8 40
+#define GPIO_PH9 41
+#define GPIO_PH10 42
+#define GPIO_PH11 43
+#define GPIO_PH12 44
+#define GPIO_PH13 45
+#define GPIO_PH14 46
+#define GPIO_PH15 47
+
+#endif
+
+#ifdef BF561_FAMILY
+#define MAX_BLACKFIN_GPIOS 48
+#define PORT_FIO0 0
+#define PORT_FIO1 1
+#define PORT_FIO2 2
+#endif
+
+#ifndef __ASSEMBLY__
+
+/***********************************************************
+*
+* FUNCTIONS: Blackfin General Purpose Ports Access Functions
+*
+* INPUTS/OUTPUTS:
+* gpio - GPIO Number between 0 and MAX_BLACKFIN_GPIOS
+*
+*
+* DESCRIPTION: These functions abstract direct register access
+* to Blackfin processor General Purpose
+* Ports Regsiters
+*
+* CAUTION: These functions do not belong to the GPIO Driver API
+*************************************************************
+* MODIFICATION HISTORY :
+**************************************************************/
+
+void set_gpio_dir(unsigned short, unsigned short);
+void set_gpio_inen(unsigned short, unsigned short);
+void set_gpio_polar(unsigned short, unsigned short);
+void set_gpio_edge(unsigned short, unsigned short);
+void set_gpio_both(unsigned short, unsigned short);
+void set_gpio_data(unsigned short, unsigned short);
+void set_gpio_maska(unsigned short, unsigned short);
+void set_gpio_maskb(unsigned short, unsigned short);
+void set_gpio_toggle(unsigned short);
+void set_gpiop_dir(unsigned short, unsigned short);
+void set_gpiop_inen(unsigned short, unsigned short);
+void set_gpiop_polar(unsigned short, unsigned short);
+void set_gpiop_edge(unsigned short, unsigned short);
+void set_gpiop_both(unsigned short, unsigned short);
+void set_gpiop_data(unsigned short, unsigned short);
+void set_gpiop_maska(unsigned short, unsigned short);
+void set_gpiop_maskb(unsigned short, unsigned short);
+unsigned short get_gpio_dir(unsigned short);
+unsigned short get_gpio_inen(unsigned short);
+unsigned short get_gpio_polar(unsigned short);
+unsigned short get_gpio_edge(unsigned short);
+unsigned short get_gpio_both(unsigned short);
+unsigned short get_gpio_maska(unsigned short);
+unsigned short get_gpio_maskb(unsigned short);
+unsigned short get_gpio_data(unsigned short);
+unsigned short get_gpiop_dir(unsigned short);
+unsigned short get_gpiop_inen(unsigned short);
+unsigned short get_gpiop_polar(unsigned short);
+unsigned short get_gpiop_edge(unsigned short);
+unsigned short get_gpiop_both(unsigned short);
+unsigned short get_gpiop_maska(unsigned short);
+unsigned short get_gpiop_maskb(unsigned short);
+unsigned short get_gpiop_data(unsigned short);
+
+struct gpio_port_t {
+ unsigned short data;
+ unsigned short dummy1;
+ unsigned short data_clear;
+ unsigned short dummy2;
+ unsigned short data_set;
+ unsigned short dummy3;
+ unsigned short toggle;
+ unsigned short dummy4;
+ unsigned short maska;
+ unsigned short dummy5;
+ unsigned short maska_clear;
+ unsigned short dummy6;
+ unsigned short maska_set;
+ unsigned short dummy7;
+ unsigned short maska_toggle;
+ unsigned short dummy8;
+ unsigned short maskb;
+ unsigned short dummy9;
+ unsigned short maskb_clear;
+ unsigned short dummy10;
+ unsigned short maskb_set;
+ unsigned short dummy11;
+ unsigned short maskb_toggle;
+ unsigned short dummy12;
+ unsigned short dir;
+ unsigned short dummy13;
+ unsigned short polar;
+ unsigned short dummy14;
+ unsigned short edge;
+ unsigned short dummy15;
+ unsigned short both;
+ unsigned short dummy16;
+ unsigned short inen;
+};
+
+#ifdef CONFIG_PM
+#define PM_WAKE_RISING 0x1
+#define PM_WAKE_FALLING 0x2
+#define PM_WAKE_HIGH 0x4
+#define PM_WAKE_LOW 0x8
+#define PM_WAKE_BOTH_EDGES (PM_WAKE_RISING | PM_WAKE_FALLING)
+
+int gpio_pm_wakeup_request(unsigned short gpio, unsigned char type);
+void gpio_pm_wakeup_free(unsigned short gpio);
+unsigned int gpio_pm_setup(void);
+void gpio_pm_restore(void);
+
+struct gpio_port_s {
+ unsigned short data;
+ unsigned short data_clear;
+ unsigned short data_set;
+ unsigned short toggle;
+ unsigned short maska;
+ unsigned short maska_clear;
+ unsigned short maska_set;
+ unsigned short maska_toggle;
+ unsigned short maskb;
+ unsigned short maskb_clear;
+ unsigned short maskb_set;
+ unsigned short maskb_toggle;
+ unsigned short dir;
+ unsigned short polar;
+ unsigned short edge;
+ unsigned short both;
+ unsigned short inen;
+
+ unsigned short fer;
+};
+#endif /*CONFIG_PM*/
+
+/***********************************************************
+*
+* FUNCTIONS: Blackfin GPIO Driver
+*
+* INPUTS/OUTPUTS:
+* gpio - GPIO Number between 0 and MAX_BLACKFIN_GPIOS
+*
+*
+* DESCRIPTION: Blackfin GPIO Driver API
+*
+* CAUTION:
+*************************************************************
+* MODIFICATION HISTORY :
+**************************************************************/
+
+int gpio_request(unsigned short, const char *);
+void gpio_free(unsigned short);
+
+void gpio_set_value(unsigned short gpio, unsigned short arg);
+unsigned short gpio_get_value(unsigned short gpio);
+
+#define gpio_get_value(gpio) get_gpio_data(gpio)
+#define gpio_set_value(gpio, value) set_gpio_data(gpio, value)
+
+void gpio_direction_input(unsigned short gpio);
+void gpio_direction_output(unsigned short gpio);
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __ARCH_BLACKFIN_GPIO_H__ */
diff --git a/include/asm-blackfin/hardirq.h b/include/asm-blackfin/hardirq.h
new file mode 100644
index 0000000..0cab0d3
--- /dev/null
+++ b/include/asm-blackfin/hardirq.h
@@ -0,0 +1,41 @@
+#ifndef __BFIN_HARDIRQ_H
+#define __BFIN_HARDIRQ_H
+
+#include <linux/cache.h>
+#include <linux/threads.h>
+#include <asm/irq.h>
+
+typedef struct {
+ unsigned int __softirq_pending;
+ unsigned int __syscall_count;
+ struct task_struct *__ksoftirqd_task;
+} ____cacheline_aligned irq_cpustat_t;
+
+#include <linux/irq_cpustat.h> /* Standard mappings for irq_cpustat_t above */
+
+/*
+ * We put the hardirq and softirq counter into the preemption
+ * counter. The bitmask has the following meaning:
+ *
+ * - bits 0-7 are the preemption count (max preemption depth: 256)
+ * - bits 8-15 are the softirq count (max # of softirqs: 256)
+ * - bits 16-23 are the hardirq count (max # of hardirqs: 256)
+ *
+ * - ( bit 26 is the PREEMPT_ACTIVE flag. )
+ *
+ * PREEMPT_MASK: 0x000000ff
+ * HARDIRQ_MASK: 0x0000ff00
+ * SOFTIRQ_MASK: 0x00ff0000
+ */
+
+#define HARDIRQ_BITS 8
+
+#ifdef NR_IRQS
+# if (1 << HARDIRQ_BITS) < NR_IRQS
+# error HARDIRQ_BITS is too low!
+# endif
+#endif
+
+#define __ARCH_IRQ_EXIT_IRQS_DISABLED 1
+
+#endif
diff --git a/include/asm-blackfin/hw_irq.h b/include/asm-blackfin/hw_irq.h
new file mode 100644
index 0000000..5b51eae
--- /dev/null
+++ b/include/asm-blackfin/hw_irq.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_BFIN_HW_IRQ_H
+#define __ASM_BFIN_HW_IRQ_H
+
+/* Dummy include. */
+
+#endif
diff --git a/include/asm-blackfin/ide.h b/include/asm-blackfin/ide.h
new file mode 100644
index 0000000..41b2db4
--- /dev/null
+++ b/include/asm-blackfin/ide.h
@@ -0,0 +1,32 @@
+/****************************************************************************/
+
+/*
+ * linux/include/asm-blackfin/ide.h
+ *
+ * Copyright (C) 1994-1996 Linus Torvalds & authors
+ * Copyright (C) 2001 Lineo Inc., davidm@snapgear.com
+ * Copyright (C) 2002 Greg Ungerer (gerg@snapgear.com)
+ * Copyright (C) 2002 Yoshinori Sato (ysato@users.sourceforge.jp)
+ * Copyright (C) 2005 Hennerich Michael (hennerich@blackfin.uclinux.org)
+ */
+
+/****************************************************************************/
+#ifndef _BLACKFIN_IDE_H
+#define _BLACKFIN_IDE_H
+/****************************************************************************/
+#ifdef __KERNEL__
+/****************************************************************************/
+
+#define MAX_HWIFS 1
+
+/* Legacy ... BLK_DEV_IDECS */
+#define IDE_ARCH_OBSOLETE_INIT
+#define ide_default_io_ctl(base) ((base) + 0x206) /* obsolete */
+
+
+#include <asm-generic/ide_iops.h>
+
+/****************************************************************************/
+#endif /* __KERNEL__ */
+#endif /* _BLACKFIN_IDE_H */
+/****************************************************************************/
diff --git a/include/asm-blackfin/io.h b/include/asm-blackfin/io.h
new file mode 100644
index 0000000..7e6995e8
--- /dev/null
+++ b/include/asm-blackfin/io.h
@@ -0,0 +1,207 @@
+#ifndef _BFIN_IO_H
+#define _BFIN_IO_H
+
+#ifdef __KERNEL__
+
+#ifndef __ASSEMBLY__
+#include <linux/types.h>
+#endif
+#include <linux/compiler.h>
+
+/*
+ * These are for ISA/PCI shared memory _only_ and should never be used
+ * on any other type of memory, including Zorro memory. They are meant to
+ * access the bus in the bus byte order which is little-endian!.
+ *
+ * readX/writeX() are used to access memory mapped devices. On some
+ * architectures the memory mapped IO stuff needs to be accessed
+ * differently. On the bfin architecture, we just read/write the
+ * memory location directly.
+ */
+#ifndef __ASSEMBLY__
+
+static inline unsigned char readb(void __iomem *addr)
+{
+ unsigned int val;
+ int tmp;
+
+ __asm__ __volatile__ ("cli %1;\n\t"
+ "NOP; NOP; SSYNC;\n\t"
+ "%0 = b [%2] (z);\n\t"
+ "sti %1;\n\t"
+ : "=d"(val), "=d"(tmp): "a"(addr)
+ );
+
+ return (unsigned char) val;
+}
+
+static inline unsigned short readw(void __iomem *addr)
+{
+ unsigned int val;
+ int tmp;
+
+ __asm__ __volatile__ ("cli %1;\n\t"
+ "NOP; NOP; SSYNC;\n\t"
+ "%0 = w [%2] (z);\n\t"
+ "sti %1;\n\t"
+ : "=d"(val), "=d"(tmp): "a"(addr)
+ );
+
+ return (unsigned short) val;
+}
+
+static inline unsigned int readl(void __iomem *addr)
+{
+ unsigned int val;
+ int tmp;
+
+ __asm__ __volatile__ ("cli %1;\n\t"
+ "NOP; NOP; SSYNC;\n\t"
+ "%0 = [%2];\n\t"
+ "sti %1;\n\t"
+ : "=d"(val), "=d"(tmp): "a"(addr)
+ );
+ return val;
+}
+
+#endif /* __ASSEMBLY__ */
+
+#define writeb(b,addr) (void)((*(volatile unsigned char *) (addr)) = (b))
+#define writew(b,addr) (void)((*(volatile unsigned short *) (addr)) = (b))
+#define writel(b,addr) (void)((*(volatile unsigned int *) (addr)) = (b))
+
+#define __raw_readb readb
+#define __raw_readw readw
+#define __raw_readl readl
+#define __raw_writeb writeb
+#define __raw_writew writew
+#define __raw_writel writel
+#define memset_io(a,b,c) memset((void *)(a),(b),(c))
+#define memcpy_fromio(a,b,c) memcpy((a),(void *)(b),(c))
+#define memcpy_toio(a,b,c) memcpy((void *)(a),(b),(c))
+
+#define inb(addr) readb(addr)
+#define inw(addr) readw(addr)
+#define inl(addr) readl(addr)
+#define outb(x,addr) ((void) writeb(x,addr))
+#define outw(x,addr) ((void) writew(x,addr))
+#define outl(x,addr) ((void) writel(x,addr))
+
+#define inb_p(addr) inb(addr)
+#define inw_p(addr) inw(addr)
+#define inl_p(addr) inl(addr)
+#define outb_p(x,addr) outb(x,addr)
+#define outw_p(x,addr) outw(x,addr)
+#define outl_p(x,addr) outl(x,addr)
+
+#define ioread8_rep(a,d,c) insb(a,d,c)
+#define ioread16_rep(a,d,c) insw(a,d,c)
+#define ioread32_rep(a,d,c) insl(a,d,c)
+#define iowrite8_rep(a,s,c) outsb(a,s,c)
+#define iowrite16_rep(a,s,c) outsw(a,s,c)
+#define iowrite32_rep(a,s,c) outsl(a,s,c)
+
+#define ioread8(X) readb(X)
+#define ioread16(X) readw(X)
+#define ioread32(X) readl(X)
+#define iowrite8(val,X) writeb(val,X)
+#define iowrite16(val,X) writew(val,X)
+#define iowrite32(val,X) writel(val,X)
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/* Values for nocacheflag and cmode */
+#define IOMAP_NOCACHE_SER 1
+
+#ifndef __ASSEMBLY__
+
+extern void outsb(void __iomem *port, const void *addr, unsigned long count);
+extern void outsw(void __iomem *port, const void *addr, unsigned long count);
+extern void outsl(void __iomem *port, const void *addr, unsigned long count);
+
+extern void insb(const void __iomem *port, void *addr, unsigned long count);
+extern void insw(const void __iomem *port, void *addr, unsigned long count);
+extern void insl(const void __iomem *port, void *addr, unsigned long count);
+
+/*
+ * Map some physical address range into the kernel address space.
+ */
+static inline void __iomem *__ioremap(unsigned long physaddr, unsigned long size,
+ int cacheflag)
+{
+ return (void __iomem *)physaddr;
+}
+
+/*
+ * Unmap a ioremap()ed region again
+ */
+static inline void iounmap(void *addr)
+{
+}
+
+/*
+ * __iounmap unmaps nearly everything, so be careful
+ * it doesn't free currently pointer/page tables anymore but it
+ * wans't used anyway and might be added later.
+ */
+static inline void __iounmap(void *addr, unsigned long size)
+{
+}
+
+/*
+ * Set new cache mode for some kernel address space.
+ * The caller must push data for that range itself, if such data may already
+ * be in the cache.
+ */
+static inline void kernel_set_cachemode(void *addr, unsigned long size,
+ int cmode)
+{
+}
+
+static inline void __iomem *ioremap(unsigned long physaddr, unsigned long size)
+{
+ return __ioremap(physaddr, size, IOMAP_NOCACHE_SER);
+}
+static inline void __iomem *ioremap_nocache(unsigned long physaddr,
+ unsigned long size)
+{
+ return __ioremap(physaddr, size, IOMAP_NOCACHE_SER);
+}
+
+extern void blkfin_inv_cache_all(void);
+
+#endif
+
+#define ioport_map(port, nr) ((void __iomem*)(port))
+#define ioport_unmap(addr)
+
+#define dma_cache_inv(_start,_size) do { blkfin_inv_cache_all();} while (0)
+#define dma_cache_wback(_start,_size) do { } while (0)
+#define dma_cache_wback_inv(_start,_size) do { blkfin_inv_cache_all();} while (0)
+
+/* Pages to physical address... */
+#define page_to_phys(page) ((page - mem_map) << PAGE_SHIFT)
+#define page_to_bus(page) ((page - mem_map) << PAGE_SHIFT)
+
+#define mm_ptov(vaddr) ((void *) (vaddr))
+#define mm_vtop(vaddr) ((unsigned long) (vaddr))
+#define phys_to_virt(vaddr) ((void *) (vaddr))
+#define virt_to_phys(vaddr) ((unsigned long) (vaddr))
+
+#define virt_to_bus virt_to_phys
+#define bus_to_virt phys_to_virt
+
+/*
+ * Convert a physical pointer to a virtual kernel pointer for /dev/mem
+ * access
+ */
+#define xlate_dev_mem_ptr(p) __va(p)
+
+/*
+ * Convert a virtual cached pointer to an uncached pointer
+ */
+#define xlate_dev_kmem_ptr(p) p
+
+#endif /* __KERNEL__ */
+
+#endif /* _BFIN_IO_H */
diff --git a/include/asm-blackfin/ioctl.h b/include/asm-blackfin/ioctl.h
new file mode 100644
index 0000000..b279fe0
--- /dev/null
+++ b/include/asm-blackfin/ioctl.h
@@ -0,0 +1 @@
+#include <asm-generic/ioctl.h>
diff --git a/include/asm-blackfin/ioctls.h b/include/asm-blackfin/ioctls.h
new file mode 100644
index 0000000..8356204
--- /dev/null
+++ b/include/asm-blackfin/ioctls.h
@@ -0,0 +1,82 @@
+#ifndef __ARCH_BFIN_IOCTLS_H__
+#define __ARCH_BFIN_IOCTLS_H__
+
+#include <asm/ioctl.h>
+
+/* 0x54 is just a magic number to make these relatively unique ('T') */
+
+#define TCGETS 0x5401
+#define TCSETS 0x5402
+#define TCSETSW 0x5403
+#define TCSETSF 0x5404
+#define TCGETA 0x5405
+#define TCSETA 0x5406
+#define TCSETAW 0x5407
+#define TCSETAF 0x5408
+#define TCSBRK 0x5409
+#define TCXONC 0x540A
+#define TCFLSH 0x540B
+#define TIOCEXCL 0x540C
+#define TIOCNXCL 0x540D
+#define TIOCSCTTY 0x540E
+#define TIOCGPGRP 0x540F
+#define TIOCSPGRP 0x5410
+#define TIOCOUTQ 0x5411
+#define TIOCSTI 0x5412
+#define TIOCGWINSZ 0x5413
+#define TIOCSWINSZ 0x5414
+#define TIOCMGET 0x5415
+#define TIOCMBIS 0x5416
+#define TIOCMBIC 0x5417
+#define TIOCMSET 0x5418
+#define TIOCGSOFTCAR 0x5419
+#define TIOCSSOFTCAR 0x541A
+#define FIONREAD 0x541B
+#define TIOCINQ FIONREAD
+#define TIOCLINUX 0x541C
+#define TIOCCONS 0x541D
+#define TIOCGSERIAL 0x541E
+#define TIOCSSERIAL 0x541F
+#define TIOCPKT 0x5420
+#define FIONBIO 0x5421
+#define TIOCNOTTY 0x5422
+#define TIOCSETD 0x5423
+#define TIOCGETD 0x5424
+#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */
+#define TIOCTTYGSTRUCT 0x5426 /* For debugging only */
+#define TIOCSBRK 0x5427 /* BSD compatibility */
+#define TIOCCBRK 0x5428 /* BSD compatibility */
+#define TIOCGSID 0x5429 /* Return the session ID of FD */
+#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
+#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
+
+#define FIONCLEX 0x5450 /* these numbers need to be adjusted. */
+#define FIOCLEX 0x5451
+#define FIOASYNC 0x5452
+#define TIOCSERCONFIG 0x5453
+#define TIOCSERGWILD 0x5454
+#define TIOCSERSWILD 0x5455
+#define TIOCGLCKTRMIOS 0x5456
+#define TIOCSLCKTRMIOS 0x5457
+#define TIOCSERGSTRUCT 0x5458 /* For debugging only */
+#define TIOCSERGETLSR 0x5459 /* Get line status register */
+#define TIOCSERGETMULTI 0x545A /* Get multiport config */
+#define TIOCSERSETMULTI 0x545B /* Set multiport config */
+
+#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */
+#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */
+
+#define FIOQSIZE 0x545E
+
+/* Used for packet mode */
+#define TIOCPKT_DATA 0
+#define TIOCPKT_FLUSHREAD 1
+#define TIOCPKT_FLUSHWRITE 2
+#define TIOCPKT_STOP 4
+#define TIOCPKT_START 8
+#define TIOCPKT_NOSTOP 16
+#define TIOCPKT_DOSTOP 32
+
+#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */
+
+#endif /* __ARCH_BFIN_IOCTLS_H__ */
diff --git a/include/asm-blackfin/ipc.h b/include/asm-blackfin/ipc.h
new file mode 100644
index 0000000..a46e3d9
--- /dev/null
+++ b/include/asm-blackfin/ipc.h
@@ -0,0 +1 @@
+#include <asm-generic/ipc.h>
diff --git a/include/asm-blackfin/ipcbuf.h b/include/asm-blackfin/ipcbuf.h
new file mode 100644
index 0000000..8f0899c
--- /dev/null
+++ b/include/asm-blackfin/ipcbuf.h
@@ -0,0 +1,30 @@
+/* Changes origined from m68k version. Lineo Inc. May 2001 */
+
+#ifndef __BFIN_IPCBUF_H__
+#define __BFIN_IPCBUF_H__
+
+/*
+ * The user_ipc_perm structure for m68k architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 32-bit mode_t and seq
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct ipc64_perm {
+ __kernel_key_t key;
+ __kernel_uid32_t uid;
+ __kernel_gid32_t gid;
+ __kernel_uid32_t cuid;
+ __kernel_gid32_t cgid;
+ __kernel_mode_t mode;
+ unsigned short __pad1;
+ unsigned short seq;
+ unsigned short __pad2;
+ unsigned long __unused1;
+ unsigned long __unused2;
+};
+
+#endif /* __BFIN_IPCBUF_H__ */
diff --git a/include/asm-blackfin/irq.h b/include/asm-blackfin/irq.h
new file mode 100644
index 0000000..65480da
--- /dev/null
+++ b/include/asm-blackfin/irq.h
@@ -0,0 +1,70 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive
+ * for more details.
+ *
+ * Changed by HuTao Apr18, 2003
+ *
+ * Copyright was missing when I got the code so took from MIPS arch ...MaTed---
+ * Copyright (C) 1994 by Waldorf GMBH, written by Ralf Baechle
+ * Copyright (C) 1995, 96, 97, 98, 99, 2000, 2001 by Ralf Baechle
+ *
+ * Adapted for BlackFin (ADI) by Ted Ma <mated@sympatico.ca>
+ * Copyright (c) 2002 Arcturus Networks Inc. (www.arcturusnetworks.com)
+ * Copyright (c) 2002 Lineo, Inc. <mattw@lineo.com>
+ */
+
+#ifndef _BFIN_IRQ_H_
+#define _BFIN_IRQ_H_
+
+#include <asm/mach/irq.h>
+#include <asm/ptrace.h>
+
+/*******************************************************************************
+ ***** INTRODUCTION ***********
+ * On the Blackfin, the interrupt structure allows remmapping of the hardware
+ * levels.
+ * - I'm going to assume that the H/W level is going to stay at the default
+ * settings. If someone wants to go through and abstart this out, feel free
+ * to mod the interrupt numbering scheme.
+ * - I'm abstracting the interrupts so that uClinux does not know anything
+ * about the H/W levels. If you want to change the H/W AND keep the abstracted
+ * levels that uClinux sees, you should be able to do most of it here.
+ * - I've left the "abstract" numbering sparce in case someone wants to pull the
+ * interrupts apart (just the TX/RX for the various devices)
+ *******************************************************************************/
+
+/* SYS_IRQS and NR_IRQS are defined in <asm/mach-bf5xx/irq.h>*/
+
+/*
+ * Machine specific interrupt sources.
+ *
+ * Adding an interrupt service routine for a source with this bit
+ * set indicates a special machine specific interrupt source.
+ * The machine specific files define these sources.
+ *
+ * The IRQ_MACHSPEC bit is now gone - the only thing it did was to
+ * introduce unnecessary overhead.
+ *
+ * All interrupt handling is actually machine specific so it is better
+ * to use function pointers, as used by the Sparc port, and select the
+ * interrupt handling functions when initializing the kernel. This way
+ * we save some unnecessary overhead at run-time.
+ * 01/11/97 - Jes
+ */
+
+extern void ack_bad_irq(unsigned int irq);
+
+static __inline__ int irq_canonicalize(int irq)
+{
+ return irq;
+}
+
+/* count of spurious interrupts */
+/* extern volatile unsigned int num_spurious; */
+
+#ifndef NO_IRQ
+#define NO_IRQ ((unsigned int)(-1))
+#endif
+
+#endif /* _BFIN_IRQ_H_ */
diff --git a/include/asm-blackfin/irq_handler.h b/include/asm-blackfin/irq_handler.h
new file mode 100644
index 0000000..d830f0a
--- /dev/null
+++ b/include/asm-blackfin/irq_handler.h
@@ -0,0 +1,22 @@
+#ifndef _IRQ_HANDLER_H
+#define _IRQ_HANDLER_H
+
+/* BASE LEVEL interrupt handler routines */
+asmlinkage void evt_emulation(void);
+asmlinkage void evt_exception(void);
+asmlinkage void trap(void);
+asmlinkage void evt_ivhw(void);
+asmlinkage void evt_timer(void);
+asmlinkage void evt_evt2(void);
+asmlinkage void evt_evt7(void);
+asmlinkage void evt_evt8(void);
+asmlinkage void evt_evt9(void);
+asmlinkage void evt_evt10(void);
+asmlinkage void evt_evt11(void);
+asmlinkage void evt_evt12(void);
+asmlinkage void evt_evt13(void);
+asmlinkage void evt_soft_int1(void);
+asmlinkage void evt_system_call(void);
+asmlinkage void init_exception_buff(void);
+
+#endif
diff --git a/include/asm-blackfin/irq_regs.h b/include/asm-blackfin/irq_regs.h
new file mode 100644
index 0000000..3dd9c0b
--- /dev/null
+++ b/include/asm-blackfin/irq_regs.h
@@ -0,0 +1 @@
+#include <asm-generic/irq_regs.h>
diff --git a/include/asm-blackfin/kdebug.h b/include/asm-blackfin/kdebug.h
new file mode 100644
index 0000000..6ece1b0
--- /dev/null
+++ b/include/asm-blackfin/kdebug.h
@@ -0,0 +1 @@
+#include <asm-generic/kdebug.h>
diff --git a/include/asm-blackfin/kmap_types.h b/include/asm-blackfin/kmap_types.h
new file mode 100644
index 0000000..e215f71
--- /dev/null
+++ b/include/asm-blackfin/kmap_types.h
@@ -0,0 +1,21 @@
+#ifndef _ASM_KMAP_TYPES_H
+#define _ASM_KMAP_TYPES_H
+
+enum km_type {
+ KM_BOUNCE_READ,
+ KM_SKB_SUNRPC_DATA,
+ KM_SKB_DATA_SOFTIRQ,
+ KM_USER0,
+ KM_USER1,
+ KM_BIO_SRC_IRQ,
+ KM_BIO_DST_IRQ,
+ KM_PTE0,
+ KM_PTE1,
+ KM_IRQ0,
+ KM_IRQ1,
+ KM_SOFTIRQ0,
+ KM_SOFTIRQ1,
+ KM_TYPE_NR
+};
+
+#endif
diff --git a/include/asm-blackfin/l1layout.h b/include/asm-blackfin/l1layout.h
new file mode 100644
index 0000000..c13ded7
--- /dev/null
+++ b/include/asm-blackfin/l1layout.h
@@ -0,0 +1,31 @@
+/*
+ * l1layout.h
+ * Defines a layout of L1 scratchpad memory that userspace can rely on.
+ */
+
+#ifndef _L1LAYOUT_H_
+#define _L1LAYOUT_H_
+
+#include <asm/blackfin.h>
+
+#ifndef __ASSEMBLY__
+
+/* Data that is "mapped" into the process VM at the start of the L1 scratch
+ memory, so that each process can access it at a fixed address. Used for
+ stack checking. */
+struct l1_scratch_task_info
+{
+ /* Points to the start of the stack. */
+ void *stack_start;
+ /* Not updated by the kernel; a user process can modify this to
+ keep track of the lowest address of the stack pointer during its
+ runtime. */
+ void *lowest_sp;
+};
+
+/* A pointer to the structure in memory. */
+#define L1_SCRATCH_TASK_INFO ((struct l1_scratch_task_info *)L1_SCRATCH_START)
+
+#endif
+
+#endif
diff --git a/include/asm-blackfin/linkage.h b/include/asm-blackfin/linkage.h
new file mode 100644
index 0000000..5a822bb
--- /dev/null
+++ b/include/asm-blackfin/linkage.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_LINKAGE_H
+#define __ASM_LINKAGE_H
+
+#define __ALIGN .align 4
+#define __ALIGN_STR ".align 4"
+
+#endif
diff --git a/include/asm-blackfin/local.h b/include/asm-blackfin/local.h
new file mode 100644
index 0000000..75afffb
--- /dev/null
+++ b/include/asm-blackfin/local.h
@@ -0,0 +1,6 @@
+#ifndef __BLACKFIN_LOCAL_H
+#define __BLACKFIN_LOCAL_H
+
+#include <asm-generic/local.h>
+
+#endif /* __BLACKFIN_LOCAL_H */
diff --git a/include/asm-blackfin/mach-bf533/anomaly.h b/include/asm-blackfin/mach-bf533/anomaly.h
new file mode 100644
index 0000000..a84d390
--- /dev/null
+++ b/include/asm-blackfin/mach-bf533/anomaly.h
@@ -0,0 +1,175 @@
+/*
+ * File: include/asm-blackfin/mach-bf533/anomaly.h
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Rev:
+ *
+ * Modified:
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.
+ * If not, write to the Free Software Foundation,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+/* This file shoule be up to date with:
+ * - Revision U, May 17, 2006; ADSP-BF533 Blackfin Processor Anomaly List
+ * - Revision Y, May 17, 2006; ADSP-BF532 Blackfin Processor Anomaly List
+ * - Revision T, May 17, 2006; ADSP-BF531 Blackfin Processor Anomaly List
+ */
+
+#ifndef _MACH_ANOMALY_H_
+#define _MACH_ANOMALY_H_
+
+/* We do not support 0.1 or 0.2 silicon - sorry */
+#if (defined(CONFIG_BF_REV_0_1) || defined(CONFIG_BF_REV_0_2))
+#error Kernel will not work on BF533 Version 0.1 or 0.2
+#endif
+
+/* Issues that are common to 0.5, 0.4, and 0.3 silicon */
+#if (defined(CONFIG_BF_REV_0_5) || defined(CONFIG_BF_REV_0_4) || defined(CONFIG_BF_REV_0_3))
+#define ANOMALY_05000074 /* A multi issue instruction with dsp32shiftimm in
+ slot1 and store of a P register in slot 2 is not
+ supported */
+#define ANOMALY_05000105 /* Watchpoint Status Register (WPSTAT) bits are set on
+ every corresponding match */
+#define ANOMALY_05000119 /* DMA_RUN bit is not valid after a Peripheral Receive
+ Channel DMA stops */
+#define ANOMALY_05000122 /* Rx.H can not be used to access 16-bit System MMR
+ registers. */
+#define ANOMALY_05000166 /* PPI Data Lengths Between 8 and 16 do not zero out
+ upper bits*/
+#define ANOMALY_05000167 /* Turning Serial Ports on With External Frame Syncs */
+#define ANOMALY_05000180 /* PPI_DELAY not functional in PPI modes with 0 frame
+ syncs */
+#define ANOMALY_05000208 /* VSTAT status bit in PLL_STAT register is not
+ functional */
+#define ANOMALY_05000219 /* NMI event at boot time results in unpredictable
+ state */
+#define ANOMALY_05000229 /* SPI Slave Boot Mode modifies registers */
+#define ANOMALY_05000272 /* Certain data cache write through modes fail for
+ VDDint <=0.9V */
+#define ANOMALY_05000273 /* Writes to Synchronous SDRAM memory may be lost */
+#define ANOMALY_05000277 /* Writes to a flag data register one SCLK cycle after
+ an edge is detected may clear interrupt */
+#define ANOMALY_05000278 /* Disabling Peripherals with DMA running may cause
+ DMA system instability */
+#define ANOMALY_05000281 /* False Hardware Error Exception when ISR context is
+ not restored */
+#define ANOMALY_05000282 /* Memory DMA corruption with 32-bit data and traffic
+ control */
+#define ANOMALY_05000283 /* A system MMR write is stalled indefinitely when
+ killed in a particular stage*/
+#define ANOMALY_05000312 /* Errors when SSYNC, CSYNC, or loads to LT, LB and LC
+ registers are interrupted */
+#define ANOMALY_05000311 /* Erroneous flag pin operations under specific sequences*/
+
+#endif
+
+/* These issues only occur on 0.3 or 0.4 BF533 */
+#if (defined(CONFIG_BF_REV_0_4) || defined(CONFIG_BF_REV_0_3))
+#define ANOMALY_05000099 /* UART Line Status Register (UART_LSR) bits are not
+ updated at the same time. */
+#define ANOMALY_05000158 /* Boot fails when data cache enabled: Data from a Data
+ Cache Fill can be corrupted after or during
+ Instruction DMA if certain core stalls exist */
+#define ANOMALY_05000179 /* PPI_COUNT cannot be programmed to 0 in General
+ Purpose TX or RX modes */
+#define ANOMALY_05000198 /* Failing SYSTEM MMR accesses when stalled by
+ preceding memory read */
+#define ANOMALY_05000200 /* SPORT TFS and DT are incorrectly driven during
+ inactive channels in certain conditions */
+#define ANOMALY_05000202 /* Possible infinite stall with specific dual dag
+ situation */
+#define ANOMALY_05000215 /* UART TX Interrupt masked erroneously */
+#define ANOMALY_05000225 /* Incorrect pulse-width of UART start-bit */
+#define ANOMALY_05000227 /* Scratchpad memory bank reads may return incorrect
+ data*/
+#define ANOMALY_05000230 /* UART Receiver is less robust against Baudrate
+ Differences in certain Conditions */
+#define ANOMALY_05000231 /* UART STB bit incorrectly affects receiver setting */
+#define ANOMALY_05000242 /* DF bit in PLL_CTL register does not respond to
+ hardware reset */
+#define ANOMALY_05000244 /* With instruction cache enabled, a CSYNC or SSYNC or
+ IDLE around a Change of Control causes
+ unpredictable results */
+#define ANOMALY_05000245 /* Spurious Hardware Error from an access in the
+ shadow of a conditional branch */
+#define ANOMALY_05000246 /* Data CPLB's should prevent spurious hardware
+ errors */
+#define ANOMALY_05000253 /* Maximum external clock speed for Timers */
+#define ANOMALY_05000255 /* Entering Hibernate Mode with RTC Seconds event
+ interrupt not functional */
+#define ANOMALY_05000257 /* An interrupt or exception during short Hardware
+ loops may cause the instruction fetch unit to
+ malfunction */
+#define ANOMALY_05000258 /* Instruction Cache is corrupted when bit 9 and 12 of
+ the ICPLB Data registers differ */
+#define ANOMALY_05000260 /* ICPLB_STATUS MMR register may be corrupted */
+#define ANOMALY_05000261 /* DCPLB_FAULT_ADDR MMR register may be corrupted */
+#define ANOMALY_05000262 /* Stores to data cache may be lost */
+#define ANOMALY_05000263 /* Hardware loop corrupted when taking an ICPLB exception */
+#define ANOMALY_05000264 /* A Sync instruction (CSYNC, SSYNC) or an IDLE
+ instruction will cause an infinite stall in the
+ second to last instruction in a hardware loop */
+#define ANOMALY_05000265 /* Sensitivity to noise with slow input edge rates on
+ SPORT external receive and transmit clocks. */
+#define ANOMALY_05000269 /* High I/O activity causes the output voltage of the
+ internal voltage regulator (VDDint) to increase. */
+#define ANOMALY_05000270 /* High I/O activity causes the output voltage of the
+ internal voltage regulator (VDDint) to decrease */
+#endif
+
+/* These issues are only on 0.4 silicon */
+#if (defined(CONFIG_BF_REV_0_4))
+#define ANOMALY_05000234 /* Incorrect Revision Number in DSPID Register */
+#define ANOMALY_05000250 /* Incorrect Bit-Shift of Data Word in Multichannel
+ (TDM) */
+#endif
+
+/* These issues are only on 0.3 silicon */
+#if defined(CONFIG_BF_REV_0_3)
+#define ANOMALY_05000183 /* Timer Pin limitations for PPI TX Modes with
+ External Frame Syncs */
+#define ANOMALY_05000189 /* False Protection Exceptions caused by Speculative
+ Instruction or Data Fetches, or by Fetches at the
+ boundary of reserved memory space */
+#define ANOMALY_05000193 /* False Flag Pin Interrupts on Edge Sensitive Inputs
+ when polarity setting is changed */
+#define ANOMALY_05000194 /* Sport Restarting in specific modes may cause data
+ corruption */
+#define ANOMALY_05000199 /* DMA current address shows wrong value during carry
+ fix */
+#define ANOMALY_05000201 /* Receive frame sync not ignored during active
+ frames in sport MCM */
+#define ANOMALY_05000203 /* Specific sequence that can cause DMA error or DMA
+ stopping */
+#if defined(CONFIG_BF533)
+#define ANOMALY_05000204 /* Incorrect data read with write-through cache and
+ allocate cache lines on reads only mode */
+#endif /* CONFIG_BF533 */
+#define ANOMALY_05000207 /* Recovery from "brown-out" condition */
+#define ANOMALY_05000209 /* Speed-Path in computational unit affects certain
+ instructions */
+#define ANOMALY_05000233 /* PPI_FS3 is not driven in 2 or 3 internal Frame
+ Sync Transmit Mode */
+#define ANOMALY_05000271 /* Spontaneous reset of Internal Voltage Regulator */
+#endif
+
+#endif /* _MACH_ANOMALY_H_ */
diff --git a/include/asm-blackfin/mach-bf533/bf533.h b/include/asm-blackfin/mach-bf533/bf533.h
new file mode 100644
index 0000000..185fc12
--- /dev/null
+++ b/include/asm-blackfin/mach-bf533/bf533.h
@@ -0,0 +1,306 @@
+/*
+ * File: include/asm-blackfin/mach-bf533/bf533.h
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description: SYSTEM MMR REGISTER AND MEMORY MAP FOR ADSP-BF561
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef __MACH_BF533_H__
+#define __MACH_BF533_H__
+
+#define SUPPORTED_REVID 2
+
+#define OFFSET_(x) ((x) & 0x0000FFFF)
+
+/*some misc defines*/
+#define IMASK_IVG15 0x8000
+#define IMASK_IVG14 0x4000
+#define IMASK_IVG13 0x2000
+#define IMASK_IVG12 0x1000
+
+#define IMASK_IVG11 0x0800
+#define IMASK_IVG10 0x0400
+#define IMASK_IVG9 0x0200
+#define IMASK_IVG8 0x0100
+
+#define IMASK_IVG7 0x0080
+#define IMASK_IVGTMR 0x0040
+#define IMASK_IVGHW 0x0020
+
+/***************************/
+
+
+#define BLKFIN_DSUBBANKS 4
+#define BLKFIN_DWAYS 2
+#define BLKFIN_DLINES 64
+#define BLKFIN_ISUBBANKS 4
+#define BLKFIN_IWAYS 4
+#define BLKFIN_ILINES 32
+
+#define WAY0_L 0x1
+#define WAY1_L 0x2
+#define WAY01_L 0x3
+#define WAY2_L 0x4
+#define WAY02_L 0x5
+#define WAY12_L 0x6
+#define WAY012_L 0x7
+
+#define WAY3_L 0x8
+#define WAY03_L 0x9
+#define WAY13_L 0xA
+#define WAY013_L 0xB
+
+#define WAY32_L 0xC
+#define WAY320_L 0xD
+#define WAY321_L 0xE
+#define WAYALL_L 0xF
+
+#define DMC_ENABLE (2<<2) /*yes, 2, not 1 */
+
+/* IAR0 BIT FIELDS*/
+#define RTC_ERROR_BIT 0x0FFFFFFF
+#define UART_ERROR_BIT 0xF0FFFFFF
+#define SPORT1_ERROR_BIT 0xFF0FFFFF
+#define SPI_ERROR_BIT 0xFFF0FFFF
+#define SPORT0_ERROR_BIT 0xFFFF0FFF
+#define PPI_ERROR_BIT 0xFFFFF0FF
+#define DMA_ERROR_BIT 0xFFFFFF0F
+#define PLLWAKE_ERROR_BIT 0xFFFFFFFF
+
+/* IAR1 BIT FIELDS*/
+#define DMA7_UARTTX_BIT 0x0FFFFFFF
+#define DMA6_UARTRX_BIT 0xF0FFFFFF
+#define DMA5_SPI_BIT 0xFF0FFFFF
+#define DMA4_SPORT1TX_BIT 0xFFF0FFFF
+#define DMA3_SPORT1RX_BIT 0xFFFF0FFF
+#define DMA2_SPORT0TX_BIT 0xFFFFF0FF
+#define DMA1_SPORT0RX_BIT 0xFFFFFF0F
+#define DMA0_PPI_BIT 0xFFFFFFFF
+
+/* IAR2 BIT FIELDS*/
+#define WDTIMER_BIT 0x0FFFFFFF
+#define MEMDMA1_BIT 0xF0FFFFFF
+#define MEMDMA0_BIT 0xFF0FFFFF
+#define PFB_BIT 0xFFF0FFFF
+#define PFA_BIT 0xFFFF0FFF
+#define TIMER2_BIT 0xFFFFF0FF
+#define TIMER1_BIT 0xFFFFFF0F
+#define TIMER0_BIT 0xFFFFFFFF
+
+/********************************* EBIU Settings ************************************/
+#define AMBCTL0VAL ((CONFIG_BANK_1 << 16) | CONFIG_BANK_0)
+#define AMBCTL1VAL ((CONFIG_BANK_3 << 16) | CONFIG_BANK_2)
+
+#ifdef CONFIG_C_AMBEN_ALL
+#define V_AMBEN AMBEN_ALL
+#endif
+#ifdef CONFIG_C_AMBEN
+#define V_AMBEN 0x0
+#endif
+#ifdef CONFIG_C_AMBEN_B0
+#define V_AMBEN AMBEN_B0
+#endif
+#ifdef CONFIG_C_AMBEN_B0_B1
+#define V_AMBEN AMBEN_B0_B1
+#endif
+#ifdef CONFIG_C_AMBEN_B0_B1_B2
+#define V_AMBEN AMBEN_B0_B1_B2
+#endif
+#ifdef CONFIG_C_AMCKEN
+#define V_AMCKEN AMCKEN
+#else
+#define V_AMCKEN 0x0
+#endif
+#ifdef CONFIG_C_CDPRIO
+#define V_CDPRIO 0x100
+#else
+#define V_CDPRIO 0x0
+#endif
+
+#define AMGCTLVAL (V_AMBEN | V_AMCKEN | V_CDPRIO)
+
+#define MAX_VC 650000000
+#define MIN_VC 50000000
+
+#ifdef CONFIG_BFIN_KERNEL_CLOCK
+/********************************PLL Settings **************************************/
+#if (CONFIG_VCO_MULT < 0)
+#error "VCO Multiplier is less than 0. Please select a different value"
+#endif
+
+#if (CONFIG_VCO_MULT == 0)
+#error "VCO Multiplier should be greater than 0. Please select a different value"
+#endif
+
+#if (CONFIG_VCO_MULT > 64)
+#error "VCO Multiplier is more than 64. Please select a different value"
+#endif
+
+#ifndef CONFIG_CLKIN_HALF
+#define CONFIG_VCO_HZ (CONFIG_CLKIN_HZ * CONFIG_VCO_MULT)
+#else
+#define CONFIG_VCO_HZ ((CONFIG_CLKIN_HZ * CONFIG_VCO_MULT)/2)
+#endif
+
+#ifndef CONFIG_PLL_BYPASS
+#define CONFIG_CCLK_HZ (CONFIG_VCO_HZ/CONFIG_CCLK_DIV)
+#define CONFIG_SCLK_HZ (CONFIG_VCO_HZ/CONFIG_SCLK_DIV)
+#else
+#define CONFIG_CCLK_HZ CONFIG_CLKIN_HZ
+#define CONFIG_SCLK_HZ CONFIG_CLKIN_HZ
+#endif
+
+#if (CONFIG_SCLK_DIV < 1)
+#error "SCLK DIV cannot be less than 1 or more than 15. Please select a proper value"
+#endif
+
+#if (CONFIG_SCLK_DIV > 15)
+#error "SCLK DIV cannot be less than 1 or more than 15. Please select a proper value"
+#endif
+
+#if (CONFIG_CCLK_DIV != 1)
+#if (CONFIG_CCLK_DIV != 2)
+#if (CONFIG_CCLK_DIV != 4)
+#if (CONFIG_CCLK_DIV != 8)
+#error "CCLK DIV can be 1,2,4 or 8 only. Please select a proper value"
+#endif
+#endif
+#endif
+#endif
+
+#if (CONFIG_VCO_HZ > MAX_VC)
+#error "VCO selected is more than maximum value. Please change the VCO multipler"
+#endif
+
+#if (CONFIG_SCLK_HZ > 133000000)
+#error "Sclk value selected is more than maximum. Please select a proper value for SCLK multiplier"
+#endif
+
+#if (CONFIG_SCLK_HZ < 27000000)
+#error "Sclk value selected is less than minimum. Please select a proper value for SCLK multiplier"
+#endif
+
+#if (CONFIG_SCLK_HZ > CONFIG_CCLK_HZ)
+#if (CONFIG_SCLK_HZ != CONFIG_CLKIN_HZ)
+#if (CONFIG_CCLK_HZ != CONFIG_CLKIN_HZ)
+#error "Please select sclk less than cclk"
+#endif
+#endif
+#endif
+
+#if (CONFIG_CCLK_DIV == 1)
+#define CONFIG_CCLK_ACT_DIV CCLK_DIV1
+#endif
+#if (CONFIG_CCLK_DIV == 2)
+#define CONFIG_CCLK_ACT_DIV CCLK_DIV2
+#endif
+#if (CONFIG_CCLK_DIV == 4)
+#define CONFIG_CCLK_ACT_DIV CCLK_DIV4
+#endif
+#if (CONFIG_CCLK_DIV == 8)
+#define CONFIG_CCLK_ACT_DIV CCLK_DIV8
+#endif
+#ifndef CONFIG_CCLK_ACT_DIV
+#define CONFIG_CCLK_ACT_DIV CONFIG_CCLK_DIV_not_defined_properly
+#endif
+
+#if defined(ANOMALY_05000273) && (CONFIG_CCLK_DIV == 1)
+#error ANOMALY 05000273, please make sure CCLK is at least 2x SCLK
+#endif
+
+#endif /* CONFIG_BFIN_KERNEL_CLOCK */
+
+#ifdef CONFIG_BF533
+#define CPU "BF533"
+#define CPUID 0x027a5000
+#endif
+#ifdef CONFIG_BF532
+#define CPU "BF532"
+#define CPUID 0x0275A000
+#endif
+#ifdef CONFIG_BF531
+#define CPU "BF531"
+#define CPUID 0x027a5000
+#endif
+#ifndef CPU
+#define CPU "UNKNOWN"
+#define CPUID 0x0
+#endif
+
+#if (CONFIG_MEM_SIZE % 4)
+#error "SDRAM mem size must be multible of 4MB"
+#endif
+
+#define SDRAM_IGENERIC (CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID | CPLB_PORTPRIO)
+#define SDRAM_IKERNEL (SDRAM_IGENERIC | CPLB_LOCK)
+#define L1_IMEMORY ( CPLB_USER_RD | CPLB_VALID | CPLB_LOCK)
+#define SDRAM_INON_CHBL ( CPLB_USER_RD | CPLB_VALID)
+
+/*Use the menuconfig cache policy here - CONFIG_BLKFIN_WT/CONFIG_BLKFIN_WB*/
+
+#define ANOMALY_05000158_WORKAROUND 0x200
+#ifdef CONFIG_BLKFIN_WB /*Write Back Policy */
+#define SDRAM_DGENERIC (CPLB_L1_CHBL | CPLB_DIRTY \
+ | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND)
+#else /*Write Through */
+#define SDRAM_DGENERIC (CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW | CPLB_DIRTY \
+ | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND)
+#endif
+
+#define L1_DMEMORY (CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_LOCK | CPLB_DIRTY)
+#define SDRAM_DNON_CHBL (CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_DIRTY)
+#define SDRAM_EBIU (CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_DIRTY)
+#define SDRAM_OOPS (CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_LOCK | CPLB_DIRTY)
+
+#define SIZE_1K 0x00000400 /* 1K */
+#define SIZE_4K 0x00001000 /* 4K */
+#define SIZE_1M 0x00100000 /* 1M */
+#define SIZE_4M 0x00400000 /* 4M */
+
+#define MAX_CPLBS (16 * 2)
+
+/*
+* Number of required data CPLB switchtable entries
+* MEMSIZE / 4 (we mostly install 4M page size CPLBs
+* approx 16 for smaller 1MB page size CPLBs for allignment purposes
+* 1 for L1 Data Memory
+* 1 for CONFIG_DEBUG_HUNT_FOR_ZERO
+* 1 for ASYNC Memory
+*/
+
+
+#define MAX_SWITCH_D_CPLBS (((CONFIG_MEM_SIZE / 4) + 16 + 1 + 1 + 1) * 2)
+
+/*
+* Number of required instruction CPLB switchtable entries
+* MEMSIZE / 4 (we mostly install 4M page size CPLBs
+* approx 12 for smaller 1MB page size CPLBs for allignment purposes
+* 1 for L1 Instruction Memory
+* 1 for CONFIG_DEBUG_HUNT_FOR_ZERO
+*/
+
+#define MAX_SWITCH_I_CPLBS (((CONFIG_MEM_SIZE / 4) + 12 + 1 + 1) * 2)
+
+#endif /* __MACH_BF533_H__ */
diff --git a/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h
new file mode 100644
index 0000000..23bf76a
--- /dev/null
+++ b/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h
@@ -0,0 +1,108 @@
+#include <linux/serial.h>
+#include <asm/dma.h>
+
+#define NR_PORTS 1
+
+#define OFFSET_THR 0x00 /* Transmit Holding register */
+#define OFFSET_RBR 0x00 /* Receive Buffer register */
+#define OFFSET_DLL 0x00 /* Divisor Latch (Low-Byte) */
+#define OFFSET_IER 0x04 /* Interrupt Enable Register */
+#define OFFSET_DLH 0x04 /* Divisor Latch (High-Byte) */
+#define OFFSET_IIR 0x08 /* Interrupt Identification Register */
+#define OFFSET_LCR 0x0C /* Line Control Register */
+#define OFFSET_MCR 0x10 /* Modem Control Register */
+#define OFFSET_LSR 0x14 /* Line Status Register */
+#define OFFSET_MSR 0x18 /* Modem Status Register */
+#define OFFSET_SCR 0x1C /* SCR Scratch Register */
+#define OFFSET_GCTL 0x24 /* Global Control Register */
+
+#define UART_GET_CHAR(uart) bfin_read16(((uart)->port.membase + OFFSET_RBR))
+#define UART_GET_DLL(uart) bfin_read16(((uart)->port.membase + OFFSET_DLL))
+#define UART_GET_IER(uart) bfin_read16(((uart)->port.membase + OFFSET_IER))
+#define UART_GET_DLH(uart) bfin_read16(((uart)->port.membase + OFFSET_DLH))
+#define UART_GET_IIR(uart) bfin_read16(((uart)->port.membase + OFFSET_IIR))
+#define UART_GET_LCR(uart) bfin_read16(((uart)->port.membase + OFFSET_LCR))
+#define UART_GET_LSR(uart) bfin_read16(((uart)->port.membase + OFFSET_LSR))
+#define UART_GET_GCTL(uart) bfin_read16(((uart)->port.membase + OFFSET_GCTL))
+
+#define UART_PUT_CHAR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_THR),v)
+#define UART_PUT_DLL(uart,v) bfin_write16(((uart)->port.membase + OFFSET_DLL),v)
+#define UART_PUT_IER(uart,v) bfin_write16(((uart)->port.membase + OFFSET_IER),v)
+#define UART_PUT_DLH(uart,v) bfin_write16(((uart)->port.membase + OFFSET_DLH),v)
+#define UART_PUT_LCR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_LCR),v)
+#define UART_PUT_GCTL(uart,v) bfin_write16(((uart)->port.membase + OFFSET_GCTL),v)
+
+#ifdef CONFIG_BFIN_UART0_CTSRTS
+# define CONFIG_SERIAL_BFIN_CTSRTS
+# ifndef CONFIG_UART0_CTS_PIN
+# define CONFIG_UART0_CTS_PIN -1
+# endif
+# ifndef CONFIG_UART0_RTS_PIN
+# define CONFIG_UART0_RTS_PIN -1
+# endif
+#endif
+
+struct bfin_serial_port {
+ struct uart_port port;
+ unsigned int old_status;
+#ifdef CONFIG_SERIAL_BFIN_DMA
+ int tx_done;
+ int tx_count;
+ struct circ_buf rx_dma_buf;
+ struct timer_list rx_dma_timer;
+ int rx_dma_nrows;
+ unsigned int tx_dma_channel;
+ unsigned int rx_dma_channel;
+ struct work_struct tx_dma_workqueue;
+#else
+ struct work_struct cts_workqueue;
+#endif
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
+ int cts_pin;
+ int rts_pin;
+#endif
+};
+
+struct bfin_serial_port bfin_serial_ports[NR_PORTS];
+struct bfin_serial_res {
+ unsigned long uart_base_addr;
+ int uart_irq;
+#ifdef CONFIG_SERIAL_BFIN_DMA
+ unsigned int uart_tx_dma_channel;
+ unsigned int uart_rx_dma_channel;
+#endif
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
+ int uart_cts_pin;
+ int uart_rts_pin;
+#endif
+};
+
+struct bfin_serial_res bfin_serial_resource[] = {
+ 0xFFC00400,
+ IRQ_UART_RX,
+#ifdef CONFIG_SERIAL_BFIN_DMA
+ CH_UART_TX,
+ CH_UART_RX,
+#endif
+#ifdef CONFIG_BFIN_UART0_CTSRTS
+ CONFIG_UART0_CTS_PIN,
+ CONFIG_UART0_RTS_PIN,
+#endif
+};
+
+
+int nr_ports = NR_PORTS;
+static void bfin_serial_hw_init(struct bfin_serial_port *uart)
+{
+
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
+ if (uart->cts_pin >= 0) {
+ gpio_request(uart->cts_pin, NULL);
+ gpio_direction_input(uart->cts_pin);
+ }
+ if (uart->rts_pin >= 0) {
+ gpio_request(uart->rts_pin, NULL);
+ gpio_direction_input(uart->rts_pin);
+ }
+#endif
+}
diff --git a/include/asm-blackfin/mach-bf533/blackfin.h b/include/asm-blackfin/mach-bf533/blackfin.h
new file mode 100644
index 0000000..e438449
--- /dev/null
+++ b/include/asm-blackfin/mach-bf533/blackfin.h
@@ -0,0 +1,45 @@
+/*
+ * File: include/asm-blackfin/mach-bf533/blackfin.h
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Rev:
+ *
+ * Modified:
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.
+ * If not, write to the Free Software Foundation,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef _MACH_BLACKFIN_H_
+#define _MACH_BLACKFIN_H_
+
+#define BF533_FAMILY
+
+#include "bf533.h"
+#include "mem_map.h"
+#include "defBF532.h"
+#include "anomaly.h"
+
+#if !(defined(__ASSEMBLY__) || defined(ASSEMBLY))
+#include "cdefBF532.h"
+#endif
+
+#endif /* _MACH_BLACKFIN_H_ */
diff --git a/include/asm-blackfin/mach-bf533/cdefBF532.h b/include/asm-blackfin/mach-bf533/cdefBF532.h
new file mode 100644
index 0000000..1d7c494
--- /dev/null
+++ b/include/asm-blackfin/mach-bf533/cdefBF532.h
@@ -0,0 +1,706 @@
+/*
+ * File: include/asm-blackfin/mach-bf533/cdefBF532.h
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Rev:
+ *
+ * Modified:
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.
+ * If not, write to the Free Software Foundation,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef _CDEF_BF532_H
+#define _CDEF_BF532_H
+/*
+#if !defined(__ADSPLPBLACKFIN__)
+#warning cdefBF532.h should only be included for 532 compatible chips.
+#endif
+*/
+/*include all Core registers and bit definitions*/
+#include "defBF532.h"
+
+/*include core specific register pointer definitions*/
+#include <asm/mach-common/cdef_LPBlackfin.h>
+
+#include <asm/system.h>
+
+/* Clock and System Control (0xFFC0 0400-0xFFC0 07FF) */
+#define bfin_read_PLL_CTL() bfin_read16(PLL_CTL)
+#define bfin_write_PLL_CTL(val) bfin_write16(PLL_CTL,val)
+#define bfin_read_PLL_STAT() bfin_read16(PLL_STAT)
+#define bfin_write_PLL_STAT(val) bfin_write16(PLL_STAT,val)
+#define bfin_read_PLL_LOCKCNT() bfin_read16(PLL_LOCKCNT)
+#define bfin_write_PLL_LOCKCNT(val) bfin_write16(PLL_LOCKCNT,val)
+#define bfin_read_CHIPID() bfin_read32(CHIPID)
+#define bfin_read_SWRST() bfin_read16(SWRST)
+#define bfin_write_SWRST(val) bfin_write16(SWRST,val)
+#define bfin_read_SYSCR() bfin_read16(SYSCR)
+#define bfin_write_SYSCR(val) bfin_write16(SYSCR,val)
+#define bfin_read_PLL_DIV() bfin_read16(PLL_DIV)
+#define bfin_write_PLL_DIV(val) bfin_write16(PLL_DIV,val)
+#define bfin_read_VR_CTL() bfin_read16(VR_CTL)
+/* Writing to VR_CTL initiates a PLL relock sequence. */
+static __inline__ void bfin_write_VR_CTL(unsigned int val)
+{
+ unsigned long flags, iwr;
+
+ bfin_write16(VR_CTL, val);
+ __builtin_bfin_ssync();
+ /* Enable the PLL Wakeup bit in SIC IWR */
+ iwr = bfin_read32(SIC_IWR);
+ /* Only allow PPL Wakeup) */
+ bfin_write32(SIC_IWR, IWR_ENABLE(0));
+ local_irq_save(flags);
+ asm("IDLE;");
+ local_irq_restore(flags);
+ bfin_write32(SIC_IWR, iwr);
+}
+
+/* System Interrupt Controller (0xFFC0 0C00-0xFFC0 0FFF) */
+#define bfin_read_SIC_IAR0() bfin_read32(SIC_IAR0)
+#define bfin_write_SIC_IAR0(val) bfin_write32(SIC_IAR0,val)
+#define bfin_read_SIC_IAR1() bfin_read32(SIC_IAR1)
+#define bfin_write_SIC_IAR1(val) bfin_write32(SIC_IAR1,val)
+#define bfin_read_SIC_IAR2() bfin_read32(SIC_IAR2)
+#define bfin_write_SIC_IAR2(val) bfin_write32(SIC_IAR2,val)
+#define bfin_read_SIC_IAR3() bfin_read32(SIC_IAR3)
+#define bfin_write_SIC_IAR3(val) bfin_write32(SIC_IAR3,val)
+#define bfin_read_SIC_IMASK() bfin_read32(SIC_IMASK)
+#define bfin_write_SIC_IMASK(val) bfin_write32(SIC_IMASK,val)
+#define bfin_read_SIC_ISR() bfin_read32(SIC_ISR)
+#define bfin_write_SIC_ISR(val) bfin_write32(SIC_ISR,val)
+#define bfin_read_SIC_IWR() bfin_read32(SIC_IWR)
+#define bfin_write_SIC_IWR(val) bfin_write32(SIC_IWR,val)
+
+/* Watchdog Timer (0xFFC0 1000-0xFFC0 13FF) */
+#define bfin_read_WDOG_CTL() bfin_read16(WDOG_CTL)
+#define bfin_write_WDOG_CTL(val) bfin_write16(WDOG_CTL,val)
+#define bfin_read_WDOG_CNT() bfin_read32(WDOG_CNT)
+#define bfin_write_WDOG_CNT(val) bfin_write32(WDOG_CNT,val)
+#define bfin_read_WDOG_STAT() bfin_read32(WDOG_STAT)
+#define bfin_write_WDOG_STAT(val) bfin_write32(WDOG_STAT,val)
+
+/* Real Time Clock (0xFFC0 1400-0xFFC0 17FF) */
+#define bfin_read_RTC_STAT() bfin_read32(RTC_STAT)
+#define bfin_write_RTC_STAT(val) bfin_write32(RTC_STAT,val)
+#define bfin_read_RTC_ICTL() bfin_read16(RTC_ICTL)
+#define bfin_write_RTC_ICTL(val) bfin_write16(RTC_ICTL,val)
+#define bfin_read_RTC_ISTAT() bfin_read16(RTC_ISTAT)
+#define bfin_write_RTC_ISTAT(val) bfin_write16(RTC_ISTAT,val)
+#define bfin_read_RTC_SWCNT() bfin_read16(RTC_SWCNT)
+#define bfin_write_RTC_SWCNT(val) bfin_write16(RTC_SWCNT,val)
+#define bfin_read_RTC_ALARM() bfin_read32(RTC_ALARM)
+#define bfin_write_RTC_ALARM(val) bfin_write32(RTC_ALARM,val)
+#define bfin_read_RTC_FAST() bfin_read16(RTC_FAST)
+#define bfin_write_RTC_FAST(val) bfin_write16(RTC_FAST,val)
+#define bfin_read_RTC_PREN() bfin_read16(RTC_PREN)
+#define bfin_write_RTC_PREN(val) bfin_write16(RTC_PREN,val)
+
+/* General Purpose IO (0xFFC0 2400-0xFFC0 27FF) */
+#define bfin_read_FIO_DIR() bfin_read16(FIO_DIR)
+#define bfin_write_FIO_DIR(val) bfin_write16(FIO_DIR,val)
+#define bfin_read_FIO_FLAG_C() bfin_read16(FIO_FLAG_C)
+#define bfin_write_FIO_FLAG_C(val) bfin_write16(FIO_FLAG_C,val)
+#define bfin_read_FIO_FLAG_S() bfin_read16(FIO_FLAG_S)
+#define bfin_write_FIO_FLAG_S(val) bfin_write16(FIO_FLAG_S,val)
+#define bfin_read_FIO_MASKA_C() bfin_read16(FIO_MASKA_C)
+#define bfin_write_FIO_MASKA_C(val) bfin_write16(FIO_MASKA_C,val)
+#define bfin_read_FIO_MASKA_S() bfin_read16(FIO_MASKA_S)
+#define bfin_write_FIO_MASKA_S(val) bfin_write16(FIO_MASKA_S,val)
+#define bfin_read_FIO_MASKB_C() bfin_read16(FIO_MASKB_C)
+#define bfin_write_FIO_MASKB_C(val) bfin_write16(FIO_MASKB_C,val)
+#define bfin_read_FIO_MASKB_S() bfin_read16(FIO_MASKB_S)
+#define bfin_write_FIO_MASKB_S(val) bfin_write16(FIO_MASKB_S,val)
+#define bfin_read_FIO_POLAR() bfin_read16(FIO_POLAR)
+#define bfin_write_FIO_POLAR(val) bfin_write16(FIO_POLAR,val)
+#define bfin_read_FIO_EDGE() bfin_read16(FIO_EDGE)
+#define bfin_write_FIO_EDGE(val) bfin_write16(FIO_EDGE,val)
+#define bfin_read_FIO_BOTH() bfin_read16(FIO_BOTH)
+#define bfin_write_FIO_BOTH(val) bfin_write16(FIO_BOTH,val)
+#define bfin_read_FIO_INEN() bfin_read16(FIO_INEN)
+#define bfin_write_FIO_INEN(val) bfin_write16(FIO_INEN,val)
+#define bfin_read_FIO_FLAG_D() bfin_read16(FIO_FLAG_D)
+#define bfin_write_FIO_FLAG_D(val) bfin_write16(FIO_FLAG_D,val)
+#define bfin_read_FIO_FLAG_T() bfin_read16(FIO_FLAG_T)
+#define bfin_write_FIO_FLAG_T(val) bfin_write16(FIO_FLAG_T,val)
+#define bfin_read_FIO_MASKA_D() bfin_read16(FIO_MASKA_D)
+#define bfin_write_FIO_MASKA_D(val) bfin_write16(FIO_MASKA_D,val)
+#define bfin_read_FIO_MASKA_T() bfin_read16(FIO_MASKA_T)
+#define bfin_write_FIO_MASKA_T(val) bfin_write16(FIO_MASKA_T,val)
+#define bfin_read_FIO_MASKB_D() bfin_read16(FIO_MASKB_D)
+#define bfin_write_FIO_MASKB_D(val) bfin_write16(FIO_MASKB_D,val)
+#define bfin_read_FIO_MASKB_T() bfin_read16(FIO_MASKB_T)
+#define bfin_write_FIO_MASKB_T(val) bfin_write16(FIO_MASKB_T,val)
+
+/* DMA Traffic controls */
+#define bfin_read_DMA_TCPER() bfin_read16(DMA_TCPER)
+#define bfin_write_DMA_TCPER(val) bfin_write16(DMA_TCPER,val)
+#define bfin_read_DMA_TCCNT() bfin_read16(DMA_TCCNT)
+#define bfin_write_DMA_TCCNT(val) bfin_write16(DMA_TCCNT,val)
+#define bfin_read_DMA_TC_PER() bfin_read16(DMA_TC_PER)
+#define bfin_write_DMA_TC_PER(val) bfin_write16(DMA_TC_PER,val)
+#define bfin_read_DMA_TC_CNT() bfin_read16(DMA_TC_CNT)
+#define bfin_write_DMA_TC_CNT(val) bfin_write16(DMA_TC_CNT,val)
+
+/* DMA Controller */
+#define bfin_read_DMA0_CONFIG() bfin_read16(DMA0_CONFIG)
+#define bfin_write_DMA0_CONFIG(val) bfin_write16(DMA0_CONFIG,val)
+#define bfin_read_DMA0_NEXT_DESC_PTR() bfin_read32(DMA0_NEXT_DESC_PTR)
+#define bfin_write_DMA0_NEXT_DESC_PTR(val) bfin_write32(DMA0_NEXT_DESC_PTR,val)
+#define bfin_read_DMA0_START_ADDR() bfin_read32(DMA0_START_ADDR)
+#define bfin_write_DMA0_START_ADDR(val) bfin_write32(DMA0_START_ADDR,val)
+#define bfin_read_DMA0_X_COUNT() bfin_read16(DMA0_X_COUNT)
+#define bfin_write_DMA0_X_COUNT(val) bfin_write16(DMA0_X_COUNT,val)
+#define bfin_read_DMA0_Y_COUNT() bfin_read16(DMA0_Y_COUNT)
+#define bfin_write_DMA0_Y_COUNT(val) bfin_write16(DMA0_Y_COUNT,val)
+#define bfin_read_DMA0_X_MODIFY() bfin_read16(DMA0_X_MODIFY)
+#define bfin_write_DMA0_X_MODIFY(val) bfin_write16(DMA0_X_MODIFY,val)
+#define bfin_read_DMA0_Y_MODIFY() bfin_read16(DMA0_Y_MODIFY)
+#define bfin_write_DMA0_Y_MODIFY(val) bfin_write16(DMA0_Y_MODIFY,val)
+#define bfin_read_DMA0_CURR_DESC_PTR() bfin_read32(DMA0_CURR_DESC_PTR)
+#define bfin_write_DMA0_CURR_DESC_PTR(val) bfin_write32(DMA0_CURR_DESC_PTR,val)
+#define bfin_read_DMA0_CURR_ADDR() bfin_read32(DMA0_CURR_ADDR)
+#define bfin_write_DMA0_CURR_ADDR(val) bfin_write32(DMA0_CURR_ADDR,val)
+#define bfin_read_DMA0_CURR_X_COUNT() bfin_read16(DMA0_CURR_X_COUNT)
+#define bfin_write_DMA0_CURR_X_COUNT(val) bfin_write16(DMA0_CURR_X_COUNT,val)
+#define bfin_read_DMA0_CURR_Y_COUNT() bfin_read16(DMA0_CURR_Y_COUNT)
+#define bfin_write_DMA0_CURR_Y_COUNT(val) bfin_write16(DMA0_CURR_Y_COUNT,val)
+#define bfin_read_DMA0_IRQ_STATUS() bfin_read16(DMA0_IRQ_STATUS)
+#define bfin_write_DMA0_IRQ_STATUS(val) bfin_write16(DMA0_IRQ_STATUS,val)
+#define bfin_read_DMA0_PERIPHERAL_MAP() bfin_read16(DMA0_PERIPHERAL_MAP)
+#define bfin_write_DMA0_PERIPHERAL_MAP(val) bfin_write16(DMA0_PERIPHERAL_MAP,val)
+
+#define bfin_read_DMA1_CONFIG() bfin_read16(DMA1_CONFIG)
+#define bfin_write_DMA1_CONFIG(val) bfin_write16(DMA1_CONFIG,val)
+#define bfin_read_DMA1_NEXT_DESC_PTR() bfin_read32(DMA1_NEXT_DESC_PTR)
+#define bfin_write_DMA1_NEXT_DESC_PTR(val) bfin_write32(DMA1_NEXT_DESC_PTR,val)
+#define bfin_read_DMA1_START_ADDR() bfin_read32(DMA1_START_ADDR)
+#define bfin_write_DMA1_START_ADDR(val) bfin_write32(DMA1_START_ADDR,val)
+#define bfin_read_DMA1_X_COUNT() bfin_read16(DMA1_X_COUNT)
+#define bfin_write_DMA1_X_COUNT(val) bfin_write16(DMA1_X_COUNT,val)
+#define bfin_read_DMA1_Y_COUNT() bfin_read16(DMA1_Y_COUNT)
+#define bfin_write_DMA1_Y_COUNT(val) bfin_write16(DMA1_Y_COUNT,val)
+#define bfin_read_DMA1_X_MODIFY() bfin_read16(DMA1_X_MODIFY)
+#define bfin_write_DMA1_X_MODIFY(val) bfin_write16(DMA1_X_MODIFY,val)
+#define bfin_read_DMA1_Y_MODIFY() bfin_read16(DMA1_Y_MODIFY)
+#define bfin_write_DMA1_Y_MODIFY(val) bfin_write16(DMA1_Y_MODIFY,val)
+#define bfin_read_DMA1_CURR_DESC_PTR() bfin_read32(DMA1_CURR_DESC_PTR)
+#define bfin_write_DMA1_CURR_DESC_PTR(val) bfin_write32(DMA1_CURR_DESC_PTR,val)
+#define bfin_read_DMA1_CURR_ADDR() bfin_read32(DMA1_CURR_ADDR)
+#define bfin_write_DMA1_CURR_ADDR(val) bfin_write32(DMA1_CURR_ADDR,val)
+#define bfin_read_DMA1_CURR_X_COUNT() bfin_read16(DMA1_CURR_X_COUNT)
+#define bfin_write_DMA1_CURR_X_COUNT(val) bfin_write16(DMA1_CURR_X_COUNT,val)
+#define bfin_read_DMA1_CURR_Y_COUNT() bfin_read16(DMA1_CURR_Y_COUNT)
+#define bfin_write_DMA1_CURR_Y_COUNT(val) bfin_write16(DMA1_CURR_Y_COUNT,val)
+#define bfin_read_DMA1_IRQ_STATUS() bfin_read16(DMA1_IRQ_STATUS)
+#define bfin_write_DMA1_IRQ_STATUS(val) bfin_write16(DMA1_IRQ_STATUS,val)
+#define bfin_read_DMA1_PERIPHERAL_MAP() bfin_read16(DMA1_PERIPHERAL_MAP)
+#define bfin_write_DMA1_PERIPHERAL_MAP(val) bfin_write16(DMA1_PERIPHERAL_MAP,val)
+
+#define bfin_read_DMA2_CONFIG() bfin_read16(DMA2_CONFIG)
+#define bfin_write_DMA2_CONFIG(val) bfin_write16(DMA2_CONFIG,val)
+#define bfin_read_DMA2_NEXT_DESC_PTR() bfin_read32(DMA2_NEXT_DESC_PTR)
+#define bfin_write_DMA2_NEXT_DESC_PTR(val) bfin_write32(DMA2_NEXT_DESC_PTR,val)
+#define bfin_read_DMA2_START_ADDR() bfin_read32(DMA2_START_ADDR)
+#define bfin_write_DMA2_START_ADDR(val) bfin_write32(DMA2_START_ADDR,val)
+#define bfin_read_DMA2_X_COUNT() bfin_read16(DMA2_X_COUNT)
+#define bfin_write_DMA2_X_COUNT(val) bfin_write16(DMA2_X_COUNT,val)
+#define bfin_read_DMA2_Y_COUNT() bfin_read16(DMA2_Y_COUNT)
+#define bfin_write_DMA2_Y_COUNT(val) bfin_write16(DMA2_Y_COUNT,val)
+#define bfin_read_DMA2_X_MODIFY() bfin_read16(DMA2_X_MODIFY)
+#define bfin_write_DMA2_X_MODIFY(val) bfin_write16(DMA2_X_MODIFY,val)
+#define bfin_read_DMA2_Y_MODIFY() bfin_read16(DMA2_Y_MODIFY)
+#define bfin_write_DMA2_Y_MODIFY(val) bfin_write16(DMA2_Y_MODIFY,val)
+#define bfin_read_DMA2_CURR_DESC_PTR() bfin_read32(DMA2_CURR_DESC_PTR)
+#define bfin_write_DMA2_CURR_DESC_PTR(val) bfin_write32(DMA2_CURR_DESC_PTR,val)
+#define bfin_read_DMA2_CURR_ADDR() bfin_read32(DMA2_CURR_ADDR)
+#define bfin_write_DMA2_CURR_ADDR(val) bfin_write32(DMA2_CURR_ADDR,val)
+#define bfin_read_DMA2_CURR_X_COUNT() bfin_read16(DMA2_CURR_X_COUNT)
+#define bfin_write_DMA2_CURR_X_COUNT(val) bfin_write16(DMA2_CURR_X_COUNT,val)
+#define bfin_read_DMA2_CURR_Y_COUNT() bfin_read16(DMA2_CURR_Y_COUNT)
+#define bfin_write_DMA2_CURR_Y_COUNT(val) bfin_write16(DMA2_CURR_Y_COUNT,val)
+#define bfin_read_DMA2_IRQ_STATUS() bfin_read16(DMA2_IRQ_STATUS)
+#define bfin_write_DMA2_IRQ_STATUS(val) bfin_write16(DMA2_IRQ_STATUS,val)
+#define bfin_read_DMA2_PERIPHERAL_MAP() bfin_read16(DMA2_PERIPHERAL_MAP)
+#define bfin_write_DMA2_PERIPHERAL_MAP(val) bfin_write16(DMA2_PERIPHERAL_MAP,val)
+
+#define bfin_read_DMA3_CONFIG() bfin_read16(DMA3_CONFIG)
+#define bfin_write_DMA3_CONFIG(val) bfin_write16(DMA3_CONFIG,val)
+#define bfin_read_DMA3_NEXT_DESC_PTR() bfin_read32(DMA3_NEXT_DESC_PTR)
+#define bfin_write_DMA3_NEXT_DESC_PTR(val) bfin_write32(DMA3_NEXT_DESC_PTR,val)
+#define bfin_read_DMA3_START_ADDR() bfin_read32(DMA3_START_ADDR)
+#define bfin_write_DMA3_START_ADDR(val) bfin_write32(DMA3_START_ADDR,val)
+#define bfin_read_DMA3_X_COUNT() bfin_read16(DMA3_X_COUNT)
+#define bfin_write_DMA3_X_COUNT(val) bfin_write16(DMA3_X_COUNT,val)
+#define bfin_read_DMA3_Y_COUNT() bfin_read16(DMA3_Y_COUNT)
+#define bfin_write_DMA3_Y_COUNT(val) bfin_write16(DMA3_Y_COUNT,val)
+#define bfin_read_DMA3_X_MODIFY() bfin_read16(DMA3_X_MODIFY)
+#define bfin_write_DMA3_X_MODIFY(val) bfin_write16(DMA3_X_MODIFY,val)
+#define bfin_read_DMA3_Y_MODIFY() bfin_read16(DMA3_Y_MODIFY)
+#define bfin_write_DMA3_Y_MODIFY(val) bfin_write16(DMA3_Y_MODIFY,val)
+#define bfin_read_DMA3_CURR_DESC_PTR() bfin_read32(DMA3_CURR_DESC_PTR)
+#define bfin_write_DMA3_CURR_DESC_PTR(val) bfin_write32(DMA3_CURR_DESC_PTR,val)
+#define bfin_read_DMA3_CURR_ADDR() bfin_read32(DMA3_CURR_ADDR)
+#define bfin_write_DMA3_CURR_ADDR(val) bfin_write32(DMA3_CURR_ADDR,val)
+#define bfin_read_DMA3_CURR_X_COUNT() bfin_read16(DMA3_CURR_X_COUNT)
+#define bfin_write_DMA3_CURR_X_COUNT(val) bfin_write16(DMA3_CURR_X_COUNT,val)
+#define bfin_read_DMA3_CURR_Y_COUNT() bfin_read16(DMA3_CURR_Y_COUNT)
+#define bfin_write_DMA3_CURR_Y_COUNT(val) bfin_write16(DMA3_CURR_Y_COUNT,val)
+#define bfin_read_DMA3_IRQ_STATUS() bfin_read16(DMA3_IRQ_STATUS)
+#define bfin_write_DMA3_IRQ_STATUS(val) bfin_write16(DMA3_IRQ_STATUS,val)
+#define bfin_read_DMA3_PERIPHERAL_MAP() bfin_read16(DMA3_PERIPHERAL_MAP)
+#define bfin_write_DMA3_PERIPHERAL_MAP(val) bfin_write16(DMA3_PERIPHERAL_MAP,val)
+
+#define bfin_read_DMA4_CONFIG() bfin_read16(DMA4_CONFIG)
+#define bfin_write_DMA4_CONFIG(val) bfin_write16(DMA4_CONFIG,val)
+#define bfin_read_DMA4_NEXT_DESC_PTR() bfin_read32(DMA4_NEXT_DESC_PTR)
+#define bfin_write_DMA4_NEXT_DESC_PTR(val) bfin_write32(DMA4_NEXT_DESC_PTR,val)
+#define bfin_read_DMA4_START_ADDR() bfin_read32(DMA4_START_ADDR)
+#define bfin_write_DMA4_START_ADDR(val) bfin_write32(DMA4_START_ADDR,val)
+#define bfin_read_DMA4_X_COUNT() bfin_read16(DMA4_X_COUNT)
+#define bfin_write_DMA4_X_COUNT(val) bfin_write16(DMA4_X_COUNT,val)
+#define bfin_read_DMA4_Y_COUNT() bfin_read16(DMA4_Y_COUNT)
+#define bfin_write_DMA4_Y_COUNT(val) bfin_write16(DMA4_Y_COUNT,val)
+#define bfin_read_DMA4_X_MODIFY() bfin_read16(DMA4_X_MODIFY)
+#define bfin_write_DMA4_X_MODIFY(val) bfin_write16(DMA4_X_MODIFY,val)
+#define bfin_read_DMA4_Y_MODIFY() bfin_read16(DMA4_Y_MODIFY)
+#define bfin_write_DMA4_Y_MODIFY(val) bfin_write16(DMA4_Y_MODIFY,val)
+#define bfin_read_DMA4_CURR_DESC_PTR() bfin_read32(DMA4_CURR_DESC_PTR)
+#define bfin_write_DMA4_CURR_DESC_PTR(val) bfin_write32(DMA4_CURR_DESC_PTR,val)
+#define bfin_read_DMA4_CURR_ADDR() bfin_read32(DMA4_CURR_ADDR)
+#define bfin_write_DMA4_CURR_ADDR(val) bfin_write32(DMA4_CURR_ADDR,val)
+#define bfin_read_DMA4_CURR_X_COUNT() bfin_read16(DMA4_CURR_X_COUNT)
+#define bfin_write_DMA4_CURR_X_COUNT(val) bfin_write16(DMA4_CURR_X_COUNT,val)
+#define bfin_read_DMA4_CURR_Y_COUNT() bfin_read16(DMA4_CURR_Y_COUNT)
+#define bfin_write_DMA4_CURR_Y_COUNT(val) bfin_write16(DMA4_CURR_Y_COUNT,val)
+#define bfin_read_DMA4_IRQ_STATUS() bfin_read16(DMA4_IRQ_STATUS)
+#define bfin_write_DMA4_IRQ_STATUS(val) bfin_write16(DMA4_IRQ_STATUS,val)
+#define bfin_read_DMA4_PERIPHERAL_MAP() bfin_read16(DMA4_PERIPHERAL_MAP)
+#define bfin_write_DMA4_PERIPHERAL_MAP(val) bfin_write16(DMA4_PERIPHERAL_MAP,val)
+
+#define bfin_read_DMA5_CONFIG() bfin_read16(DMA5_CONFIG)
+#define bfin_write_DMA5_CONFIG(val) bfin_write16(DMA5_CONFIG,val)
+#define bfin_read_DMA5_NEXT_DESC_PTR() bfin_read32(DMA5_NEXT_DESC_PTR)
+#define bfin_write_DMA5_NEXT_DESC_PTR(val) bfin_write32(DMA5_NEXT_DESC_PTR,val)
+#define bfin_read_DMA5_START_ADDR() bfin_read32(DMA5_START_ADDR)
+#define bfin_write_DMA5_START_ADDR(val) bfin_write32(DMA5_START_ADDR,val)
+#define bfin_read_DMA5_X_COUNT() bfin_read16(DMA5_X_COUNT)
+#define bfin_write_DMA5_X_COUNT(val) bfin_write16(DMA5_X_COUNT,val)
+#define bfin_read_DMA5_Y_COUNT() bfin_read16(DMA5_Y_COUNT)
+#define bfin_write_DMA5_Y_COUNT(val) bfin_write16(DMA5_Y_COUNT,val)
+#define bfin_read_DMA5_X_MODIFY() bfin_read16(DMA5_X_MODIFY)
+#define bfin_write_DMA5_X_MODIFY(val) bfin_write16(DMA5_X_MODIFY,val)
+#define bfin_read_DMA5_Y_MODIFY() bfin_read16(DMA5_Y_MODIFY)
+#define bfin_write_DMA5_Y_MODIFY(val) bfin_write16(DMA5_Y_MODIFY,val)
+#define bfin_read_DMA5_CURR_DESC_PTR() bfin_read32(DMA5_CURR_DESC_PTR)
+#define bfin_write_DMA5_CURR_DESC_PTR(val) bfin_write32(DMA5_CURR_DESC_PTR,val)
+#define bfin_read_DMA5_CURR_ADDR() bfin_read32(DMA5_CURR_ADDR)
+#define bfin_write_DMA5_CURR_ADDR(val) bfin_write32(DMA5_CURR_ADDR,val)
+#define bfin_read_DMA5_CURR_X_COUNT() bfin_read16(DMA5_CURR_X_COUNT)
+#define bfin_write_DMA5_CURR_X_COUNT(val) bfin_write16(DMA5_CURR_X_COUNT,val)
+#define bfin_read_DMA5_CURR_Y_COUNT() bfin_read16(DMA5_CURR_Y_COUNT)
+#define bfin_write_DMA5_CURR_Y_COUNT(val) bfin_write16(DMA5_CURR_Y_COUNT,val)
+#define bfin_read_DMA5_IRQ_STATUS() bfin_read16(DMA5_IRQ_STATUS)
+#define bfin_write_DMA5_IRQ_STATUS(val) bfin_write16(DMA5_IRQ_STATUS,val)
+#define bfin_read_DMA5_PERIPHERAL_MAP() bfin_read16(DMA5_PERIPHERAL_MAP)
+#define bfin_write_DMA5_PERIPHERAL_MAP(val) bfin_write16(DMA5_PERIPHERAL_MAP,val)
+
+#define bfin_read_DMA6_CONFIG() bfin_read16(DMA6_CONFIG)
+#define bfin_write_DMA6_CONFIG(val) bfin_write16(DMA6_CONFIG,val)
+#define bfin_read_DMA6_NEXT_DESC_PTR() bfin_read32(DMA6_NEXT_DESC_PTR)
+#define bfin_write_DMA6_NEXT_DESC_PTR(val) bfin_write32(DMA6_NEXT_DESC_PTR,val)
+#define bfin_read_DMA6_START_ADDR() bfin_read32(DMA6_START_ADDR)
+#define bfin_write_DMA6_START_ADDR(val) bfin_write32(DMA6_START_ADDR,val)
+#define bfin_read_DMA6_X_COUNT() bfin_read16(DMA6_X_COUNT)
+#define bfin_write_DMA6_X_COUNT(val) bfin_write16(DMA6_X_COUNT,val)
+#define bfin_read_DMA6_Y_COUNT() bfin_read16(DMA6_Y_COUNT)
+#define bfin_write_DMA6_Y_COUNT(val) bfin_write16(DMA6_Y_COUNT,val)
+#define bfin_read_DMA6_X_MODIFY() bfin_read16(DMA6_X_MODIFY)
+#define bfin_write_DMA6_X_MODIFY(val) bfin_write16(DMA6_X_MODIFY,val)
+#define bfin_read_DMA6_Y_MODIFY() bfin_read16(DMA6_Y_MODIFY)
+#define bfin_write_DMA6_Y_MODIFY(val) bfin_write16(DMA6_Y_MODIFY,val)
+#define bfin_read_DMA6_CURR_DESC_PTR() bfin_read32(DMA6_CURR_DESC_PTR)
+#define bfin_write_DMA6_CURR_DESC_PTR(val) bfin_write32(DMA6_CURR_DESC_PTR,val)
+#define bfin_read_DMA6_CURR_ADDR() bfin_read32(DMA6_CURR_ADDR)
+#define bfin_write_DMA6_CURR_ADDR(val) bfin_write32(DMA6_CURR_ADDR,val)
+#define bfin_read_DMA6_CURR_X_COUNT() bfin_read16(DMA6_CURR_X_COUNT)
+#define bfin_write_DMA6_CURR_X_COUNT(val) bfin_write16(DMA6_CURR_X_COUNT,val)
+#define bfin_read_DMA6_CURR_Y_COUNT() bfin_read16(DMA6_CURR_Y_COUNT)
+#define bfin_write_DMA6_CURR_Y_COUNT(val) bfin_write16(DMA6_CURR_Y_COUNT,val)
+#define bfin_read_DMA6_IRQ_STATUS() bfin_read16(DMA6_IRQ_STATUS)
+#define bfin_write_DMA6_IRQ_STATUS(val) bfin_write16(DMA6_IRQ_STATUS,val)
+#define bfin_read_DMA6_PERIPHERAL_MAP() bfin_read16(DMA6_PERIPHERAL_MAP)
+#define bfin_write_DMA6_PERIPHERAL_MAP(val) bfin_write16(DMA6_PERIPHERAL_MAP,val)
+
+#define bfin_read_DMA7_CONFIG() bfin_read16(DMA7_CONFIG)
+#define bfin_write_DMA7_CONFIG(val) bfin_write16(DMA7_CONFIG,val)
+#define bfin_read_DMA7_NEXT_DESC_PTR() bfin_read32(DMA7_NEXT_DESC_PTR)
+#define bfin_write_DMA7_NEXT_DESC_PTR(val) bfin_write32(DMA7_NEXT_DESC_PTR,val)
+#define bfin_read_DMA7_START_ADDR() bfin_read32(DMA7_START_ADDR)
+#define bfin_write_DMA7_START_ADDR(val) bfin_write32(DMA7_START_ADDR,val)
+#define bfin_read_DMA7_X_COUNT() bfin_read16(DMA7_X_COUNT)
+#define bfin_write_DMA7_X_COUNT(val) bfin_write16(DMA7_X_COUNT,val)
+#define bfin_read_DMA7_Y_COUNT() bfin_read16(DMA7_Y_COUNT)
+#define bfin_write_DMA7_Y_COUNT(val) bfin_write16(DMA7_Y_COUNT,val)
+#define bfin_read_DMA7_X_MODIFY() bfin_read16(DMA7_X_MODIFY)
+#define bfin_write_DMA7_X_MODIFY(val) bfin_write16(DMA7_X_MODIFY,val)
+#define bfin_read_DMA7_Y_MODIFY() bfin_read16(DMA7_Y_MODIFY)
+#define bfin_write_DMA7_Y_MODIFY(val) bfin_write16(DMA7_Y_MODIFY,val)
+#define bfin_read_DMA7_CURR_DESC_PTR() bfin_read32(DMA7_CURR_DESC_PTR)
+#define bfin_write_DMA7_CURR_DESC_PTR(val) bfin_write32(DMA7_CURR_DESC_PTR,val)
+#define bfin_read_DMA7_CURR_ADDR() bfin_read32(DMA7_CURR_ADDR)
+#define bfin_write_DMA7_CURR_ADDR(val) bfin_write32(DMA7_CURR_ADDR,val)
+#define bfin_read_DMA7_CURR_X_COUNT() bfin_read16(DMA7_CURR_X_COUNT)
+#define bfin_write_DMA7_CURR_X_COUNT(val) bfin_write16(DMA7_CURR_X_COUNT,val)
+#define bfin_read_DMA7_CURR_Y_COUNT() bfin_read16(DMA7_CURR_Y_COUNT)
+#define bfin_write_DMA7_CURR_Y_COUNT(val) bfin_write16(DMA7_CURR_Y_COUNT,val)
+#define bfin_read_DMA7_IRQ_STATUS() bfin_read16(DMA7_IRQ_STATUS)
+#define bfin_write_DMA7_IRQ_STATUS(val) bfin_write16(DMA7_IRQ_STATUS,val)
+#define bfin_read_DMA7_PERIPHERAL_MAP() bfin_read16(DMA7_PERIPHERAL_MAP)
+#define bfin_write_DMA7_PERIPHERAL_MAP(val) bfin_write16(DMA7_PERIPHERAL_MAP,val)
+
+#define bfin_read_MDMA_D1_CONFIG() bfin_read16(MDMA_D1_CONFIG)
+#define bfin_write_MDMA_D1_CONFIG(val) bfin_write16(MDMA_D1_CONFIG,val)
+#define bfin_read_MDMA_D1_NEXT_DESC_PTR() bfin_read32(MDMA_D1_NEXT_DESC_PTR)
+#define bfin_write_MDMA_D1_NEXT_DESC_PTR(val) bfin_write32(MDMA_D1_NEXT_DESC_PTR,val)
+#define bfin_read_MDMA_D1_START_ADDR() bfin_read32(MDMA_D1_START_ADDR)
+#define bfin_write_MDMA_D1_START_ADDR(val) bfin_write32(MDMA_D1_START_ADDR,val)
+#define bfin_read_MDMA_D1_X_COUNT() bfin_read16(MDMA_D1_X_COUNT)
+#define bfin_write_MDMA_D1_X_COUNT(val) bfin_write16(MDMA_D1_X_COUNT,val)
+#define bfin_read_MDMA_D1_Y_COUNT() bfin_read16(MDMA_D1_Y_COUNT)
+#define bfin_write_MDMA_D1_Y_COUNT(val) bfin_write16(MDMA_D1_Y_COUNT,val)
+#define bfin_read_MDMA_D1_X_MODIFY() bfin_read16(MDMA_D1_X_MODIFY)
+#define bfin_write_MDMA_D1_X_MODIFY(val) bfin_write16(MDMA_D1_X_MODIFY,val)
+#define bfin_read_MDMA_D1_Y_MODIFY() bfin_read16(MDMA_D1_Y_MODIFY)
+#define bfin_write_MDMA_D1_Y_MODIFY(val) bfin_write16(MDMA_D1_Y_MODIFY,val)
+#define bfin_read_MDMA_D1_CURR_DESC_PTR() bfin_read32(MDMA_D1_CURR_DESC_PTR)
+#define bfin_write_MDMA_D1_CURR_DESC_PTR(val) bfin_write32(MDMA_D1_CURR_DESC_PTR,val)
+#define bfin_read_MDMA_D1_CURR_ADDR() bfin_read32(MDMA_D1_CURR_ADDR)
+#define bfin_write_MDMA_D1_CURR_ADDR(val) bfin_write32(MDMA_D1_CURR_ADDR,val)
+#define bfin_read_MDMA_D1_CURR_X_COUNT() bfin_read16(MDMA_D1_CURR_X_COUNT)
+#define bfin_write_MDMA_D1_CURR_X_COUNT(val) bfin_write16(MDMA_D1_CURR_X_COUNT,val)
+#define bfin_read_MDMA_D1_CURR_Y_COUNT() bfin_read16(MDMA_D1_CURR_Y_COUNT)
+#define bfin_write_MDMA_D1_CURR_Y_COUNT(val) bfin_write16(MDMA_D1_CURR_Y_COUNT,val)
+#define bfin_read_MDMA_D1_IRQ_STATUS() bfin_read16(MDMA_D1_IRQ_STATUS)
+#define bfin_write_MDMA_D1_IRQ_STATUS(val) bfin_write16(MDMA_D1_IRQ_STATUS,val)
+#define bfin_read_MDMA_D1_PERIPHERAL_MAP() bfin_read16(MDMA_D1_PERIPHERAL_MAP)
+#define bfin_write_MDMA_D1_PERIPHERAL_MAP(val) bfin_write16(MDMA_D1_PERIPHERAL_MAP,val)
+
+#define bfin_read_MDMA_S1_CONFIG() bfin_read16(MDMA_S1_CONFIG)
+#define bfin_write_MDMA_S1_CONFIG(val) bfin_write16(MDMA_S1_CONFIG,val)
+#define bfin_read_MDMA_S1_NEXT_DESC_PTR() bfin_read32(MDMA_S1_NEXT_DESC_PTR)
+#define bfin_write_MDMA_S1_NEXT_DESC_PTR(val) bfin_write32(MDMA_S1_NEXT_DESC_PTR,val)
+#define bfin_read_MDMA_S1_START_ADDR() bfin_read32(MDMA_S1_START_ADDR)
+#define bfin_write_MDMA_S1_START_ADDR(val) bfin_write32(MDMA_S1_START_ADDR,val)
+#define bfin_read_MDMA_S1_X_COUNT() bfin_read16(MDMA_S1_X_COUNT)
+#define bfin_write_MDMA_S1_X_COUNT(val) bfin_write16(MDMA_S1_X_COUNT,val)
+#define bfin_read_MDMA_S1_Y_COUNT() bfin_read16(MDMA_S1_Y_COUNT)
+#define bfin_write_MDMA_S1_Y_COUNT(val) bfin_write16(MDMA_S1_Y_COUNT,val)
+#define bfin_read_MDMA_S1_X_MODIFY() bfin_read16(MDMA_S1_X_MODIFY)
+#define bfin_write_MDMA_S1_X_MODIFY(val) bfin_write16(MDMA_S1_X_MODIFY,val)
+#define bfin_read_MDMA_S1_Y_MODIFY() bfin_read16(MDMA_S1_Y_MODIFY)
+#define bfin_write_MDMA_S1_Y_MODIFY(val) bfin_write16(MDMA_S1_Y_MODIFY,val)
+#define bfin_read_MDMA_S1_CURR_DESC_PTR() bfin_read32(MDMA_S1_CURR_DESC_PTR)
+#define bfin_write_MDMA_S1_CURR_DESC_PTR(val) bfin_write32(MDMA_S1_CURR_DESC_PTR,val)
+#define bfin_read_MDMA_S1_CURR_ADDR() bfin_read32(MDMA_S1_CURR_ADDR)
+#define bfin_write_MDMA_S1_CURR_ADDR(val) bfin_write32(MDMA_S1_CURR_ADDR,val)
+#define bfin_read_MDMA_S1_CURR_X_COUNT() bfin_read16(MDMA_S1_CURR_X_COUNT)
+#define bfin_write_MDMA_S1_CURR_X_COUNT(val) bfin_write16(MDMA_S1_CURR_X_COUNT,val)
+#define bfin_read_MDMA_S1_CURR_Y_COUNT() bfin_read16(MDMA_S1_CURR_Y_COUNT)
+#define bfin_write_MDMA_S1_CURR_Y_COUNT(val) bfin_write16(MDMA_S1_CURR_Y_COUNT,val)
+#define bfin_read_MDMA_S1_IRQ_STATUS() bfin_read16(MDMA_S1_IRQ_STATUS)
+#define bfin_write_MDMA_S1_IRQ_STATUS(val) bfin_write16(MDMA_S1_IRQ_STATUS,val)
+#define bfin_read_MDMA_S1_PERIPHERAL_MAP() bfin_read16(MDMA_S1_PERIPHERAL_MAP)
+#define bfin_write_MDMA_S1_PERIPHERAL_MAP(val) bfin_write16(MDMA_S1_PERIPHERAL_MAP,val)
+
+#define bfin_read_MDMA_D0_CONFIG() bfin_read16(MDMA_D0_CONFIG)
+#define bfin_write_MDMA_D0_CONFIG(val) bfin_write16(MDMA_D0_CONFIG,val)
+#define bfin_read_MDMA_D0_NEXT_DESC_PTR() bfin_read32(MDMA_D0_NEXT_DESC_PTR)
+#define bfin_write_MDMA_D0_NEXT_DESC_PTR(val) bfin_write32(MDMA_D0_NEXT_DESC_PTR,val)
+#define bfin_read_MDMA_D0_START_ADDR() bfin_read32(MDMA_D0_START_ADDR)
+#define bfin_write_MDMA_D0_START_ADDR(val) bfin_write32(MDMA_D0_START_ADDR,val)
+#define bfin_read_MDMA_D0_X_COUNT() bfin_read16(MDMA_D0_X_COUNT)
+#define bfin_write_MDMA_D0_X_COUNT(val) bfin_write16(MDMA_D0_X_COUNT,val)
+#define bfin_read_MDMA_D0_Y_COUNT() bfin_read16(MDMA_D0_Y_COUNT)
+#define bfin_write_MDMA_D0_Y_COUNT(val) bfin_write16(MDMA_D0_Y_COUNT,val)
+#define bfin_read_MDMA_D0_X_MODIFY() bfin_read16(MDMA_D0_X_MODIFY)
+#define bfin_write_MDMA_D0_X_MODIFY(val) bfin_write16(MDMA_D0_X_MODIFY,val)
+#define bfin_read_MDMA_D0_Y_MODIFY() bfin_read16(MDMA_D0_Y_MODIFY)
+#define bfin_write_MDMA_D0_Y_MODIFY(val) bfin_write16(MDMA_D0_Y_MODIFY,val)
+#define bfin_read_MDMA_D0_CURR_DESC_PTR() bfin_read32(MDMA_D0_CURR_DESC_PTR)
+#define bfin_write_MDMA_D0_CURR_DESC_PTR(val) bfin_write32(MDMA_D0_CURR_DESC_PTR,val)
+#define bfin_read_MDMA_D0_CURR_ADDR() bfin_read32(MDMA_D0_CURR_ADDR)
+#define bfin_write_MDMA_D0_CURR_ADDR(val) bfin_write32(MDMA_D0_CURR_ADDR,val)
+#define bfin_read_MDMA_D0_CURR_X_COUNT() bfin_read16(MDMA_D0_CURR_X_COUNT)
+#define bfin_write_MDMA_D0_CURR_X_COUNT(val) bfin_write16(MDMA_D0_CURR_X_COUNT,val)
+#define bfin_read_MDMA_D0_CURR_Y_COUNT() bfin_read16(MDMA_D0_CURR_Y_COUNT)
+#define bfin_write_MDMA_D0_CURR_Y_COUNT(val) bfin_write16(MDMA_D0_CURR_Y_COUNT,val)
+#define bfin_read_MDMA_D0_IRQ_STATUS() bfin_read16(MDMA_D0_IRQ_STATUS)
+#define bfin_write_MDMA_D0_IRQ_STATUS(val) bfin_write16(MDMA_D0_IRQ_STATUS,val)
+#define bfin_read_MDMA_D0_PERIPHERAL_MAP() bfin_read16(MDMA_D0_PERIPHERAL_MAP)
+#define bfin_write_MDMA_D0_PERIPHERAL_MAP(val) bfin_write16(MDMA_D0_PERIPHERAL_MAP,val)
+
+#define bfin_read_MDMA_S0_CONFIG() bfin_read16(MDMA_S0_CONFIG)
+#define bfin_write_MDMA_S0_CONFIG(val) bfin_write16(MDMA_S0_CONFIG,val)
+#define bfin_read_MDMA_S0_NEXT_DESC_PTR() bfin_read32(MDMA_S0_NEXT_DESC_PTR)
+#define bfin_write_MDMA_S0_NEXT_DESC_PTR(val) bfin_write32(MDMA_S0_NEXT_DESC_PTR,val)
+#define bfin_read_MDMA_S0_START_ADDR() bfin_read32(MDMA_S0_START_ADDR)
+#define bfin_write_MDMA_S0_START_ADDR(val) bfin_write32(MDMA_S0_START_ADDR,val)
+#define bfin_read_MDMA_S0_X_COUNT() bfin_read16(MDMA_S0_X_COUNT)
+#define bfin_write_MDMA_S0_X_COUNT(val) bfin_write16(MDMA_S0_X_COUNT,val)
+#define bfin_read_MDMA_S0_Y_COUNT() bfin_read16(MDMA_S0_Y_COUNT)
+#define bfin_write_MDMA_S0_Y_COUNT(val) bfin_write16(MDMA_S0_Y_COUNT,val)
+#define bfin_read_MDMA_S0_X_MODIFY() bfin_read16(MDMA_S0_X_MODIFY)
+#define bfin_write_MDMA_S0_X_MODIFY(val) bfin_write16(MDMA_S0_X_MODIFY,val)
+#define bfin_read_MDMA_S0_Y_MODIFY() bfin_read16(MDMA_S0_Y_MODIFY)
+#define bfin_write_MDMA_S0_Y_MODIFY(val) bfin_write16(MDMA_S0_Y_MODIFY,val)
+#define bfin_read_MDMA_S0_CURR_DESC_PTR() bfin_read32(MDMA_S0_CURR_DESC_PTR)
+#define bfin_write_MDMA_S0_CURR_DESC_PTR(val) bfin_write32(MDMA_S0_CURR_DESC_PTR,val)
+#define bfin_read_MDMA_S0_CURR_ADDR() bfin_read32(MDMA_S0_CURR_ADDR)
+#define bfin_write_MDMA_S0_CURR_ADDR(val) bfin_write32(MDMA_S0_CURR_ADDR,val)
+#define bfin_read_MDMA_S0_CURR_X_COUNT() bfin_read16(MDMA_S0_CURR_X_COUNT)
+#define bfin_write_MDMA_S0_CURR_X_COUNT(val) bfin_write16(MDMA_S0_CURR_X_COUNT,val)
+#define bfin_read_MDMA_S0_CURR_Y_COUNT() bfin_read16(MDMA_S0_CURR_Y_COUNT)
+#define bfin_write_MDMA_S0_CURR_Y_COUNT(val) bfin_write16(MDMA_S0_CURR_Y_COUNT,val)
+#define bfin_read_MDMA_S0_IRQ_STATUS() bfin_read16(MDMA_S0_IRQ_STATUS)
+#define bfin_write_MDMA_S0_IRQ_STATUS(val) bfin_write16(MDMA_S0_IRQ_STATUS,val)
+#define bfin_read_MDMA_S0_PERIPHERAL_MAP() bfin_read16(MDMA_S0_PERIPHERAL_MAP)
+#define bfin_write_MDMA_S0_PERIPHERAL_MAP(val) bfin_write16(MDMA_S0_PERIPHERAL_MAP,val)
+
+/* Aysnchronous Memory Controller - External Bus Interface Unit (0xFFC0 3C00-0xFFC0 3FFF) */
+#define bfin_read_EBIU_AMGCTL() bfin_read16(EBIU_AMGCTL)
+#define bfin_write_EBIU_AMGCTL(val) bfin_write16(EBIU_AMGCTL,val)
+#define bfin_read_EBIU_AMBCTL0() bfin_read32(EBIU_AMBCTL0)
+#define bfin_write_EBIU_AMBCTL0(val) bfin_write32(EBIU_AMBCTL0,val)
+#define bfin_read_EBIU_AMBCTL1() bfin_read32(EBIU_AMBCTL1)
+#define bfin_write_EBIU_AMBCTL1(val) bfin_write32(EBIU_AMBCTL1,val)
+
+/* SDRAM Controller External Bus Interface Unit (0xFFC0 4C00-0xFFC0 4FFF) */
+#define bfin_read_EBIU_SDGCTL() bfin_read32(EBIU_SDGCTL)
+#define bfin_write_EBIU_SDGCTL(val) bfin_write32(EBIU_SDGCTL,val)
+#define bfin_read_EBIU_SDRRC() bfin_read16(EBIU_SDRRC)
+#define bfin_write_EBIU_SDRRC(val) bfin_write16(EBIU_SDRRC,val)
+#define bfin_read_EBIU_SDSTAT() bfin_read16(EBIU_SDSTAT)
+#define bfin_write_EBIU_SDSTAT(val) bfin_write16(EBIU_SDSTAT,val)
+#define bfin_read_EBIU_SDBCTL() bfin_read16(EBIU_SDBCTL)
+#define bfin_write_EBIU_SDBCTL(val) bfin_write16(EBIU_SDBCTL,val)
+
+/* UART Controller */
+#define bfin_read_UART_THR() bfin_read16(UART_THR)
+#define bfin_write_UART_THR(val) bfin_write16(UART_THR,val)
+#define bfin_read_UART_RBR() bfin_read16(UART_RBR)
+#define bfin_write_UART_RBR(val) bfin_write16(UART_RBR,val)
+#define bfin_read_UART_DLL() bfin_read16(UART_DLL)
+#define bfin_write_UART_DLL(val) bfin_write16(UART_DLL,val)
+#define bfin_read_UART_IER() bfin_read16(UART_IER)
+#define bfin_write_UART_IER(val) bfin_write16(UART_IER,val)
+#define bfin_read_UART_DLH() bfin_read16(UART_DLH)
+#define bfin_write_UART_DLH(val) bfin_write16(UART_DLH,val)
+#define bfin_read_UART_IIR() bfin_read16(UART_IIR)
+#define bfin_write_UART_IIR(val) bfin_write16(UART_IIR,val)
+#define bfin_read_UART_LCR() bfin_read16(UART_LCR)
+#define bfin_write_UART_LCR(val) bfin_write16(UART_LCR,val)
+#define bfin_read_UART_MCR() bfin_read16(UART_MCR)
+#define bfin_write_UART_MCR(val) bfin_write16(UART_MCR,val)
+#define bfin_read_UART_LSR() bfin_read16(UART_LSR)
+#define bfin_write_UART_LSR(val) bfin_write16(UART_LSR,val)
+/*
+#define UART_MSR
+*/
+#define bfin_read_UART_SCR() bfin_read16(UART_SCR)
+#define bfin_write_UART_SCR(val) bfin_write16(UART_SCR,val)
+#define bfin_read_UART_GCTL() bfin_read16(UART_GCTL)
+#define bfin_write_UART_GCTL(val) bfin_write16(UART_GCTL,val)
+
+/* SPI Controller */
+#define bfin_read_SPI_CTL() bfin_read16(SPI_CTL)
+#define bfin_write_SPI_CTL(val) bfin_write16(SPI_CTL,val)
+#define bfin_read_SPI_FLG() bfin_read16(SPI_FLG)
+#define bfin_write_SPI_FLG(val) bfin_write16(SPI_FLG,val)
+#define bfin_read_SPI_STAT() bfin_read16(SPI_STAT)
+#define bfin_write_SPI_STAT(val) bfin_write16(SPI_STAT,val)
+#define bfin_read_SPI_TDBR() bfin_read16(SPI_TDBR)
+#define bfin_write_SPI_TDBR(val) bfin_write16(SPI_TDBR,val)
+#define bfin_read_SPI_RDBR() bfin_read16(SPI_RDBR)
+#define bfin_write_SPI_RDBR(val) bfin_write16(SPI_RDBR,val)
+#define bfin_read_SPI_BAUD() bfin_read16(SPI_BAUD)
+#define bfin_write_SPI_BAUD(val) bfin_write16(SPI_BAUD,val)
+#define bfin_read_SPI_SHADOW() bfin_read16(SPI_SHADOW)
+#define bfin_write_SPI_SHADOW(val) bfin_write16(SPI_SHADOW,val)
+
+/* TIMER 0, 1, 2 Registers */
+#define bfin_read_TIMER0_CONFIG() bfin_read16(TIMER0_CONFIG)
+#define bfin_write_TIMER0_CONFIG(val) bfin_write16(TIMER0_CONFIG,val)
+#define bfin_read_TIMER0_COUNTER() bfin_read32(TIMER0_COUNTER)
+#define bfin_write_TIMER0_COUNTER(val) bfin_write32(TIMER0_COUNTER,val)
+#define bfin_read_TIMER0_PERIOD() bfin_read32(TIMER0_PERIOD)
+#define bfin_write_TIMER0_PERIOD(val) bfin_write32(TIMER0_PERIOD,val)
+#define bfin_read_TIMER0_WIDTH() bfin_read32(TIMER0_WIDTH)
+#define bfin_write_TIMER0_WIDTH(val) bfin_write32(TIMER0_WIDTH,val)
+
+#define bfin_read_TIMER1_CONFIG() bfin_read16(TIMER1_CONFIG)
+#define bfin_write_TIMER1_CONFIG(val) bfin_write16(TIMER1_CONFIG,val)
+#define bfin_read_TIMER1_COUNTER() bfin_read32(TIMER1_COUNTER)
+#define bfin_write_TIMER1_COUNTER(val) bfin_write32(TIMER1_COUNTER,val)
+#define bfin_read_TIMER1_PERIOD() bfin_read32(TIMER1_PERIOD)
+#define bfin_write_TIMER1_PERIOD(val) bfin_write32(TIMER1_PERIOD,val)
+#define bfin_read_TIMER1_WIDTH() bfin_read32(TIMER1_WIDTH)
+#define bfin_write_TIMER1_WIDTH(val) bfin_write32(TIMER1_WIDTH,val)
+
+#define bfin_read_TIMER2_CONFIG() bfin_read16(TIMER2_CONFIG)
+#define bfin_write_TIMER2_CONFIG(val) bfin_write16(TIMER2_CONFIG,val)
+#define bfin_read_TIMER2_COUNTER() bfin_read32(TIMER2_COUNTER)
+#define bfin_write_TIMER2_COUNTER(val) bfin_write32(TIMER2_COUNTER,val)
+#define bfin_read_TIMER2_PERIOD() bfin_read32(TIMER2_PERIOD)
+#define bfin_write_TIMER2_PERIOD(val) bfin_write32(TIMER2_PERIOD,val)
+#define bfin_read_TIMER2_WIDTH() bfin_read32(TIMER2_WIDTH)
+#define bfin_write_TIMER2_WIDTH(val) bfin_write32(TIMER2_WIDTH,val)
+
+#define bfin_read_TIMER_ENABLE() bfin_read16(TIMER_ENABLE)
+#define bfin_write_TIMER_ENABLE(val) bfin_write16(TIMER_ENABLE,val)
+#define bfin_read_TIMER_DISABLE() bfin_read16(TIMER_DISABLE)
+#define bfin_write_TIMER_DISABLE(val) bfin_write16(TIMER_DISABLE,val)
+#define bfin_read_TIMER_STATUS() bfin_read16(TIMER_STATUS)
+#define bfin_write_TIMER_STATUS(val) bfin_write16(TIMER_STATUS,val)
+
+/* SPORT0 Controller */
+#define bfin_read_SPORT0_TCR1() bfin_read16(SPORT0_TCR1)
+#define bfin_write_SPORT0_TCR1(val) bfin_write16(SPORT0_TCR1,val)
+#define bfin_read_SPORT0_TCR2() bfin_read16(SPORT0_TCR2)
+#define bfin_write_SPORT0_TCR2(val) bfin_write16(SPORT0_TCR2,val)
+#define bfin_read_SPORT0_TCLKDIV() bfin_read16(SPORT0_TCLKDIV)
+#define bfin_write_SPORT0_TCLKDIV(val) bfin_write16(SPORT0_TCLKDIV,val)
+#define bfin_read_SPORT0_TFSDIV() bfin_read16(SPORT0_TFSDIV)
+#define bfin_write_SPORT0_TFSDIV(val) bfin_write16(SPORT0_TFSDIV,val)
+#define bfin_read_SPORT0_TX() bfin_read32(SPORT0_TX)
+#define bfin_write_SPORT0_TX(val) bfin_write32(SPORT0_TX,val)
+#define bfin_read_SPORT0_RX() bfin_read32(SPORT0_RX)
+#define bfin_write_SPORT0_RX(val) bfin_write32(SPORT0_RX,val)
+#define bfin_read_SPORT0_TX32() bfin_read32(SPORT0_TX)
+#define bfin_write_SPORT0_TX32(val) bfin_write32(SPORT0_TX,val)
+#define bfin_read_SPORT0_RX32() bfin_read32(SPORT0_RX)
+#define bfin_write_SPORT0_RX32(val) bfin_write32(SPORT0_RX,val)
+#define bfin_read_SPORT0_TX16() bfin_read16(SPORT0_TX)
+#define bfin_write_SPORT0_TX16(val) bfin_write16(SPORT0_TX,val)
+#define bfin_read_SPORT0_RX16() bfin_read16(SPORT0_RX)
+#define bfin_write_SPORT0_RX16(val) bfin_write16(SPORT0_RX,val)
+#define bfin_read_SPORT0_RCR1() bfin_read16(SPORT0_RCR1)
+#define bfin_write_SPORT0_RCR1(val) bfin_write16(SPORT0_RCR1,val)
+#define bfin_read_SPORT0_RCR2() bfin_read16(SPORT0_RCR2)
+#define bfin_write_SPORT0_RCR2(val) bfin_write16(SPORT0_RCR2,val)
+#define bfin_read_SPORT0_RCLKDIV() bfin_read16(SPORT0_RCLKDIV)
+#define bfin_write_SPORT0_RCLKDIV(val) bfin_write16(SPORT0_RCLKDIV,val)
+#define bfin_read_SPORT0_RFSDIV() bfin_read16(SPORT0_RFSDIV)
+#define bfin_write_SPORT0_RFSDIV(val) bfin_write16(SPORT0_RFSDIV,val)
+#define bfin_read_SPORT0_STAT() bfin_read16(SPORT0_STAT)
+#define bfin_write_SPORT0_STAT(val) bfin_write16(SPORT0_STAT,val)
+#define bfin_read_SPORT0_CHNL() bfin_read16(SPORT0_CHNL)
+#define bfin_write_SPORT0_CHNL(val) bfin_write16(SPORT0_CHNL,val)
+#define bfin_read_SPORT0_MCMC1() bfin_read16(SPORT0_MCMC1)
+#define bfin_write_SPORT0_MCMC1(val) bfin_write16(SPORT0_MCMC1,val)
+#define bfin_read_SPORT0_MCMC2() bfin_read16(SPORT0_MCMC2)
+#define bfin_write_SPORT0_MCMC2(val) bfin_write16(SPORT0_MCMC2,val)
+#define bfin_read_SPORT0_MTCS0() bfin_read32(SPORT0_MTCS0)
+#define bfin_write_SPORT0_MTCS0(val) bfin_write32(SPORT0_MTCS0,val)
+#define bfin_read_SPORT0_MTCS1() bfin_read32(SPORT0_MTCS1)
+#define bfin_write_SPORT0_MTCS1(val) bfin_write32(SPORT0_MTCS1,val)
+#define bfin_read_SPORT0_MTCS2() bfin_read32(SPORT0_MTCS2)
+#define bfin_write_SPORT0_MTCS2(val) bfin_write32(SPORT0_MTCS2,val)
+#define bfin_read_SPORT0_MTCS3() bfin_read32(SPORT0_MTCS3)
+#define bfin_write_SPORT0_MTCS3(val) bfin_write32(SPORT0_MTCS3,val)
+#define bfin_read_SPORT0_MRCS0() bfin_read32(SPORT0_MRCS0)
+#define bfin_write_SPORT0_MRCS0(val) bfin_write32(SPORT0_MRCS0,val)
+#define bfin_read_SPORT0_MRCS1() bfin_read32(SPORT0_MRCS1)
+#define bfin_write_SPORT0_MRCS1(val) bfin_write32(SPORT0_MRCS1,val)
+#define bfin_read_SPORT0_MRCS2() bfin_read32(SPORT0_MRCS2)
+#define bfin_write_SPORT0_MRCS2(val) bfin_write32(SPORT0_MRCS2,val)
+#define bfin_read_SPORT0_MRCS3() bfin_read32(SPORT0_MRCS3)
+#define bfin_write_SPORT0_MRCS3(val) bfin_write32(SPORT0_MRCS3,val)
+
+/* SPORT1 Controller */
+#define bfin_read_SPORT1_TCR1() bfin_read16(SPORT1_TCR1)
+#define bfin_write_SPORT1_TCR1(val) bfin_write16(SPORT1_TCR1,val)
+#define bfin_read_SPORT1_TCR2() bfin_read16(SPORT1_TCR2)
+#define bfin_write_SPORT1_TCR2(val) bfin_write16(SPORT1_TCR2,val)
+#define bfin_read_SPORT1_TCLKDIV() bfin_read16(SPORT1_TCLKDIV)
+#define bfin_write_SPORT1_TCLKDIV(val) bfin_write16(SPORT1_TCLKDIV,val)
+#define bfin_read_SPORT1_TFSDIV() bfin_read16(SPORT1_TFSDIV)
+#define bfin_write_SPORT1_TFSDIV(val) bfin_write16(SPORT1_TFSDIV,val)
+#define bfin_read_SPORT1_TX() bfin_read32(SPORT1_TX)
+#define bfin_write_SPORT1_TX(val) bfin_write32(SPORT1_TX,val)
+#define bfin_read_SPORT1_RX() bfin_read32(SPORT1_RX)
+#define bfin_write_SPORT1_RX(val) bfin_write32(SPORT1_RX,val)
+#define bfin_read_SPORT1_TX32() bfin_read32(SPORT1_TX)
+#define bfin_write_SPORT1_TX32(val) bfin_write32(SPORT1_TX,val)
+#define bfin_read_SPORT1_RX32() bfin_read32(SPORT1_RX)
+#define bfin_write_SPORT1_RX32(val) bfin_write32(SPORT1_RX,val)
+#define bfin_read_SPORT1_TX16() bfin_read16(SPORT1_TX)
+#define bfin_write_SPORT1_TX16(val) bfin_write16(SPORT1_TX,val)
+#define bfin_read_SPORT1_RX16() bfin_read16(SPORT1_RX)
+#define bfin_write_SPORT1_RX16(val) bfin_write16(SPORT1_RX,val)
+#define bfin_read_SPORT1_RCR1() bfin_read16(SPORT1_RCR1)
+#define bfin_write_SPORT1_RCR1(val) bfin_write16(SPORT1_RCR1,val)
+#define bfin_read_SPORT1_RCR2() bfin_read16(SPORT1_RCR2)
+#define bfin_write_SPORT1_RCR2(val) bfin_write16(SPORT1_RCR2,val)
+#define bfin_read_SPORT1_RCLKDIV() bfin_read16(SPORT1_RCLKDIV)
+#define bfin_write_SPORT1_RCLKDIV(val) bfin_write16(SPORT1_RCLKDIV,val)
+#define bfin_read_SPORT1_RFSDIV() bfin_read16(SPORT1_RFSDIV)
+#define bfin_write_SPORT1_RFSDIV(val) bfin_write16(SPORT1_RFSDIV,val)
+#define bfin_read_SPORT1_STAT() bfin_read16(SPORT1_STAT)
+#define bfin_write_SPORT1_STAT(val) bfin_write16(SPORT1_STAT,val)
+#define bfin_read_SPORT1_CHNL() bfin_read16(SPORT1_CHNL)
+#define bfin_write_SPORT1_CHNL(val) bfin_write16(SPORT1_CHNL,val)
+#define bfin_read_SPORT1_MCMC1() bfin_read16(SPORT1_MCMC1)
+#define bfin_write_SPORT1_MCMC1(val) bfin_write16(SPORT1_MCMC1,val)
+#define bfin_read_SPORT1_MCMC2() bfin_read16(SPORT1_MCMC2)
+#define bfin_write_SPORT1_MCMC2(val) bfin_write16(SPORT1_MCMC2,val)
+#define bfin_read_SPORT1_MTCS0() bfin_read32(SPORT1_MTCS0)
+#define bfin_write_SPORT1_MTCS0(val) bfin_write32(SPORT1_MTCS0,val)
+#define bfin_read_SPORT1_MTCS1() bfin_read32(SPORT1_MTCS1)
+#define bfin_write_SPORT1_MTCS1(val) bfin_write32(SPORT1_MTCS1,val)
+#define bfin_read_SPORT1_MTCS2() bfin_read32(SPORT1_MTCS2)
+#define bfin_write_SPORT1_MTCS2(val) bfin_write32(SPORT1_MTCS2,val)
+#define bfin_read_SPORT1_MTCS3() bfin_read32(SPORT1_MTCS3)
+#define bfin_write_SPORT1_MTCS3(val) bfin_write32(SPORT1_MTCS3,val)
+#define bfin_read_SPORT1_MRCS0() bfin_read32(SPORT1_MRCS0)
+#define bfin_write_SPORT1_MRCS0(val) bfin_write32(SPORT1_MRCS0,val)
+#define bfin_read_SPORT1_MRCS1() bfin_read32(SPORT1_MRCS1)
+#define bfin_write_SPORT1_MRCS1(val) bfin_write32(SPORT1_MRCS1,val)
+#define bfin_read_SPORT1_MRCS2() bfin_read32(SPORT1_MRCS2)
+#define bfin_write_SPORT1_MRCS2(val) bfin_write32(SPORT1_MRCS2,val)
+#define bfin_read_SPORT1_MRCS3() bfin_read32(SPORT1_MRCS3)
+#define bfin_write_SPORT1_MRCS3(val) bfin_write32(SPORT1_MRCS3,val)
+
+/* Parallel Peripheral Interface (PPI) */
+#define bfin_read_PPI_CONTROL() bfin_read16(PPI_CONTROL)
+#define bfin_write_PPI_CONTROL(val) bfin_write16(PPI_CONTROL,val)
+#define bfin_read_PPI_STATUS() bfin_read16(PPI_STATUS)
+#define bfin_write_PPI_STATUS(val) bfin_write16(PPI_STATUS,val)
+#define bfin_clear_PPI_STATUS() bfin_read_PPI_STATUS()
+#define bfin_read_PPI_DELAY() bfin_read16(PPI_DELAY)
+#define bfin_write_PPI_DELAY(val) bfin_write16(PPI_DELAY,val)
+#define bfin_read_PPI_COUNT() bfin_read16(PPI_COUNT)
+#define bfin_write_PPI_COUNT(val) bfin_write16(PPI_COUNT,val)
+#define bfin_read_PPI_FRAME() bfin_read16(PPI_FRAME)
+#define bfin_write_PPI_FRAME(val) bfin_write16(PPI_FRAME,val)
+
+#endif /* _CDEF_BF532_H */
diff --git a/include/asm-blackfin/mach-bf533/defBF532.h b/include/asm-blackfin/mach-bf533/defBF532.h
new file mode 100644
index 0000000..b240a08
--- /dev/null
+++ b/include/asm-blackfin/mach-bf533/defBF532.h
@@ -0,0 +1,1175 @@
+/************************************************************************
+ *
+ * This file is subject to the terms and conditions of the GNU Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Non-GPL License also available as part of VisualDSP++
+ * http://www.analog.com/processors/resources/crosscore/visualDspDevSoftware.html
+ *
+ * (c) Copyright 2001-2005 Analog Devices, Inc. All rights reserved
+ *
+ * This file under source code control, please send bugs or changes to:
+ * dsptools.support@analog.com
+ *
+ ************************************************************************/
+/*
+ * File: include/asm-blackfin/mach-bf533/defBF532.h
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Rev:
+ *
+ * Modified:
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.
+ * If not, write to the Free Software Foundation,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+/* SYSTEM & MM REGISTER BIT & ADDRESS DEFINITIONS FOR ADSP-BF532 */
+
+#ifndef _DEF_BF532_H
+#define _DEF_BF532_H
+/*
+#if !defined(__ADSPLPBLACKFIN__)
+#warning defBF532.h should only be included for 532 compatible chips
+#endif
+*/
+/* include all Core registers and bit definitions */
+#include <asm/mach-common/def_LPBlackfin.h>
+
+/*********************************************************************************** */
+/* System MMR Register Map */
+/*********************************************************************************** */
+/* Clock and System Control (0xFFC00000 - 0xFFC000FF) */
+
+#define PLL_CTL 0xFFC00000 /* PLL Control register (16-bit) */
+#define PLL_DIV 0xFFC00004 /* PLL Divide Register (16-bit) */
+#define VR_CTL 0xFFC00008 /* Voltage Regulator Control Register (16-bit) */
+#define PLL_STAT 0xFFC0000C /* PLL Status register (16-bit) */
+#define PLL_LOCKCNT 0xFFC00010 /* PLL Lock Count register (16-bit) */
+#define CHIPID 0xFFC00014 /* Chip ID Register */
+#define SWRST 0xFFC00100 /* Software Reset Register (16-bit) */
+#define SYSCR 0xFFC00104 /* System Configuration registe */
+
+/* System Interrupt Controller (0xFFC00100 - 0xFFC001FF) */
+#define SIC_RVECT 0xFFC00108 /* Interrupt Reset Vector Address Register */
+#define SIC_IMASK 0xFFC0010C /* Interrupt Mask Register */
+#define SIC_IAR0 0xFFC00110 /* Interrupt Assignment Register 0 */
+#define SIC_IAR1 0xFFC00114 /* Interrupt Assignment Register 1 */
+#define SIC_IAR2 0xFFC00118 /* Interrupt Assignment Register 2 */
+#define SIC_ISR 0xFFC00120 /* Interrupt Status Register */
+#define SIC_IWR 0xFFC00124 /* Interrupt Wakeup Register */
+
+/* Watchdog Timer (0xFFC00200 - 0xFFC002FF) */
+#define WDOG_CTL 0xFFC00200 /* Watchdog Control Register */
+#define WDOG_CNT 0xFFC00204 /* Watchdog Count Register */
+#define WDOG_STAT 0xFFC00208 /* Watchdog Status Register */
+
+/* Real Time Clock (0xFFC00300 - 0xFFC003FF) */
+#define RTC_STAT 0xFFC00300 /* RTC Status Register */
+#define RTC_ICTL 0xFFC00304 /* RTC Interrupt Control Register */
+#define RTC_ISTAT 0xFFC00308 /* RTC Interrupt Status Register */
+#define RTC_SWCNT 0xFFC0030C /* RTC Stopwatch Count Register */
+#define RTC_ALARM 0xFFC00310 /* RTC Alarm Time Register */
+#define RTC_FAST 0xFFC00314 /* RTC Prescaler Enable Register */
+#define RTC_PREN 0xFFC00314 /* RTC Prescaler Enable Register (alternate macro) */
+
+/* UART Controller (0xFFC00400 - 0xFFC004FF) */
+#define UART_THR 0xFFC00400 /* Transmit Holding register */
+#define UART_RBR 0xFFC00400 /* Receive Buffer register */
+#define UART_DLL 0xFFC00400 /* Divisor Latch (Low-Byte) */
+#define UART_IER 0xFFC00404 /* Interrupt Enable Register */
+#define UART_DLH 0xFFC00404 /* Divisor Latch (High-Byte) */
+#define UART_IIR 0xFFC00408 /* Interrupt Identification Register */
+#define UART_LCR 0xFFC0040C /* Line Control Register */
+#define UART_MCR 0xFFC00410 /* Modem Control Register */
+#define UART_LSR 0xFFC00414 /* Line Status Register */
+#if 0
+#define UART_MSR 0xFFC00418 /* Modem Status Register (UNUSED in ADSP-BF532) */
+#endif
+#define UART_SCR 0xFFC0041C /* SCR Scratch Register */
+#define UART_GCTL 0xFFC00424 /* Global Control Register */
+
+/* SPI Controller (0xFFC00500 - 0xFFC005FF) */
+#define SPI_CTL 0xFFC00500 /* SPI Control Register */
+#define SPI_FLG 0xFFC00504 /* SPI Flag register */
+#define SPI_STAT 0xFFC00508 /* SPI Status register */
+#define SPI_TDBR 0xFFC0050C /* SPI Transmit Data Buffer Register */
+#define SPI_RDBR 0xFFC00510 /* SPI Receive Data Buffer Register */
+#define SPI_BAUD 0xFFC00514 /* SPI Baud rate Register */
+#define SPI_SHADOW 0xFFC00518 /* SPI_RDBR Shadow Register */
+
+/* TIMER 0, 1, 2 Registers (0xFFC00600 - 0xFFC006FF) */
+
+#define TIMER0_CONFIG 0xFFC00600 /* Timer 0 Configuration Register */
+#define TIMER0_COUNTER 0xFFC00604 /* Timer 0 Counter Register */
+#define TIMER0_PERIOD 0xFFC00608 /* Timer 0 Period Register */
+#define TIMER0_WIDTH 0xFFC0060C /* Timer 0 Width Register */
+
+#define TIMER1_CONFIG 0xFFC00610 /* Timer 1 Configuration Register */
+#define TIMER1_COUNTER 0xFFC00614 /* Timer 1 Counter Register */
+#define TIMER1_PERIOD 0xFFC00618 /* Timer 1 Period Register */
+#define TIMER1_WIDTH 0xFFC0061C /* Timer 1 Width Register */
+
+#define TIMER2_CONFIG 0xFFC00620 /* Timer 2 Configuration Register */
+#define TIMER2_COUNTER 0xFFC00624 /* Timer 2 Counter Register */
+#define TIMER2_PERIOD 0xFFC00628 /* Timer 2 Period Register */
+#define TIMER2_WIDTH 0xFFC0062C /* Timer 2 Width Register */
+
+#define TIMER_ENABLE 0xFFC00640 /* Timer Enable Register */
+#define TIMER_DISABLE 0xFFC00644 /* Timer Disable Register */
+#define TIMER_STATUS 0xFFC00648 /* Timer Status Register */
+
+/* General Purpose IO (0xFFC00700 - 0xFFC007FF) */
+
+#define FIO_FLAG_D 0xFFC00700 /* Flag Mask to directly specify state of pins */
+#define FIO_FLAG_C 0xFFC00704 /* Peripheral Interrupt Flag Register (clear) */
+#define FIO_FLAG_S 0xFFC00708 /* Peripheral Interrupt Flag Register (set) */
+#define FIO_FLAG_T 0xFFC0070C /* Flag Mask to directly toggle state of pins */
+#define FIO_MASKA_D 0xFFC00710 /* Flag Mask Interrupt A Register (set directly) */
+#define FIO_MASKA_C 0xFFC00714 /* Flag Mask Interrupt A Register (clear) */
+#define FIO_MASKA_S 0xFFC00718 /* Flag Mask Interrupt A Register (set) */
+#define FIO_MASKA_T 0xFFC0071C /* Flag Mask Interrupt A Register (toggle) */
+#define FIO_MASKB_D 0xFFC00720 /* Flag Mask Interrupt B Register (set directly) */
+#define FIO_MASKB_C 0xFFC00724 /* Flag Mask Interrupt B Register (clear) */
+#define FIO_MASKB_S 0xFFC00728 /* Flag Mask Interrupt B Register (set) */
+#define FIO_MASKB_T 0xFFC0072C /* Flag Mask Interrupt B Register (toggle) */
+#define FIO_DIR 0xFFC00730 /* Peripheral Flag Direction Register */
+#define FIO_POLAR 0xFFC00734 /* Flag Source Polarity Register */
+#define FIO_EDGE 0xFFC00738 /* Flag Source Sensitivity Register */
+#define FIO_BOTH 0xFFC0073C /* Flag Set on BOTH Edges Register */
+#define FIO_INEN 0xFFC00740 /* Flag Input Enable Register */
+
+/* SPORT0 Controller (0xFFC00800 - 0xFFC008FF) */
+#define SPORT0_TCR1 0xFFC00800 /* SPORT0 Transmit Configuration 1 Register */
+#define SPORT0_TCR2 0xFFC00804 /* SPORT0 Transmit Configuration 2 Register */
+#define SPORT0_TCLKDIV 0xFFC00808 /* SPORT0 Transmit Clock Divider */
+#define SPORT0_TFSDIV 0xFFC0080C /* SPORT0 Transmit Frame Sync Divider */
+#define SPORT0_TX 0xFFC00810 /* SPORT0 TX Data Register */
+#define SPORT0_RX 0xFFC00818 /* SPORT0 RX Data Register */
+#define SPORT0_RCR1 0xFFC00820 /* SPORT0 Transmit Configuration 1 Register */
+#define SPORT0_RCR2 0xFFC00824 /* SPORT0 Transmit Configuration 2 Register */
+#define SPORT0_RCLKDIV 0xFFC00828 /* SPORT0 Receive Clock Divider */
+#define SPORT0_RFSDIV 0xFFC0082C /* SPORT0 Receive Frame Sync Divider */
+#define SPORT0_STAT 0xFFC00830 /* SPORT0 Status Register */
+#define SPORT0_CHNL 0xFFC00834 /* SPORT0 Current Channel Register */
+#define SPORT0_MCMC1 0xFFC00838 /* SPORT0 Multi-Channel Configuration Register 1 */
+#define SPORT0_MCMC2 0xFFC0083C /* SPORT0 Multi-Channel Configuration Register 2 */
+#define SPORT0_MTCS0 0xFFC00840 /* SPORT0 Multi-Channel Transmit Select Register 0 */
+#define SPORT0_MTCS1 0xFFC00844 /* SPORT0 Multi-Channel Transmit Select Register 1 */
+#define SPORT0_MTCS2 0xFFC00848 /* SPORT0 Multi-Channel Transmit Select Register 2 */
+#define SPORT0_MTCS3 0xFFC0084C /* SPORT0 Multi-Channel Transmit Select Register 3 */
+#define SPORT0_MRCS0 0xFFC00850 /* SPORT0 Multi-Channel Receive Select Register 0 */
+#define SPORT0_MRCS1 0xFFC00854 /* SPORT0 Multi-Channel Receive Select Register 1 */
+#define SPORT0_MRCS2 0xFFC00858 /* SPORT0 Multi-Channel Receive Select Register 2 */
+#define SPORT0_MRCS3 0xFFC0085C /* SPORT0 Multi-Channel Receive Select Register 3 */
+
+/* SPORT1 Controller (0xFFC00900 - 0xFFC009FF) */
+#define SPORT1_TCR1 0xFFC00900 /* SPORT1 Transmit Configuration 1 Register */
+#define SPORT1_TCR2 0xFFC00904 /* SPORT1 Transmit Configuration 2 Register */
+#define SPORT1_TCLKDIV 0xFFC00908 /* SPORT1 Transmit Clock Divider */
+#define SPORT1_TFSDIV 0xFFC0090C /* SPORT1 Transmit Frame Sync Divider */
+#define SPORT1_TX 0xFFC00910 /* SPORT1 TX Data Register */
+#define SPORT1_RX 0xFFC00918 /* SPORT1 RX Data Register */
+#define SPORT1_RCR1 0xFFC00920 /* SPORT1 Transmit Configuration 1 Register */
+#define SPORT1_RCR2 0xFFC00924 /* SPORT1 Transmit Configuration 2 Register */
+#define SPORT1_RCLKDIV 0xFFC00928 /* SPORT1 Receive Clock Divider */
+#define SPORT1_RFSDIV 0xFFC0092C /* SPORT1 Receive Frame Sync Divider */
+#define SPORT1_STAT 0xFFC00930 /* SPORT1 Status Register */
+#define SPORT1_CHNL 0xFFC00934 /* SPORT1 Current Channel Register */
+#define SPORT1_MCMC1 0xFFC00938 /* SPORT1 Multi-Channel Configuration Register 1 */
+#define SPORT1_MCMC2 0xFFC0093C /* SPORT1 Multi-Channel Configuration Register 2 */
+#define SPORT1_MTCS0 0xFFC00940 /* SPORT1 Multi-Channel Transmit Select Register 0 */
+#define SPORT1_MTCS1 0xFFC00944 /* SPORT1 Multi-Channel Transmit Select Register 1 */
+#define SPORT1_MTCS2 0xFFC00948 /* SPORT1 Multi-Channel Transmit Select Register 2 */
+#define SPORT1_MTCS3 0xFFC0094C /* SPORT1 Multi-Channel Transmit Select Register 3 */
+#define SPORT1_MRCS0 0xFFC00950 /* SPORT1 Multi-Channel Receive Select Register 0 */
+#define SPORT1_MRCS1 0xFFC00954 /* SPORT1 Multi-Channel Receive Select Register 1 */
+#define SPORT1_MRCS2 0xFFC00958 /* SPORT1 Multi-Channel Receive Select Register 2 */
+#define SPORT1_MRCS3 0xFFC0095C /* SPORT1 Multi-Channel Receive Select Register 3 */
+
+/* Asynchronous Memory Controller - External Bus Interface Unit */
+#define EBIU_AMGCTL 0xFFC00A00 /* Asynchronous Memory Global Control Register */
+#define EBIU_AMBCTL0 0xFFC00A04 /* Asynchronous Memory Bank Control Register 0 */
+#define EBIU_AMBCTL1 0xFFC00A08 /* Asynchronous Memory Bank Control Register 1 */
+
+/* SDRAM Controller External Bus Interface Unit (0xFFC00A00 - 0xFFC00AFF) */
+
+#define EBIU_SDGCTL 0xFFC00A10 /* SDRAM Global Control Register */
+#define EBIU_SDBCTL 0xFFC00A14 /* SDRAM Bank Control Register */
+#define EBIU_SDRRC 0xFFC00A18 /* SDRAM Refresh Rate Control Register */
+#define EBIU_SDSTAT 0xFFC00A1C /* SDRAM Status Register */
+
+/* DMA Traffic controls */
+#define DMA_TCPER 0xFFC00B0C /* Traffic Control Periods Register */
+#define DMA_TCCNT 0xFFC00B10 /* Traffic Control Current Counts Register */
+#define DMA_TC_PER 0xFFC00B0C /* Traffic Control Periods Register */
+#define DMA_TC_CNT 0xFFC00B10 /* Traffic Control Current Counts Register */
+
+/* DMA Controller (0xFFC00C00 - 0xFFC00FFF) */
+#define DMA0_CONFIG 0xFFC00C08 /* DMA Channel 0 Configuration Register */
+#define DMA0_NEXT_DESC_PTR 0xFFC00C00 /* DMA Channel 0 Next Descriptor Pointer Register */
+#define DMA0_START_ADDR 0xFFC00C04 /* DMA Channel 0 Start Address Register */
+#define DMA0_X_COUNT 0xFFC00C10 /* DMA Channel 0 X Count Register */
+#define DMA0_Y_COUNT 0xFFC00C18 /* DMA Channel 0 Y Count Register */
+#define DMA0_X_MODIFY 0xFFC00C14 /* DMA Channel 0 X Modify Register */
+#define DMA0_Y_MODIFY 0xFFC00C1C /* DMA Channel 0 Y Modify Register */
+#define DMA0_CURR_DESC_PTR 0xFFC00C20 /* DMA Channel 0 Current Descriptor Pointer Register */
+#define DMA0_CURR_ADDR 0xFFC00C24 /* DMA Channel 0 Current Address Register */
+#define DMA0_CURR_X_COUNT 0xFFC00C30 /* DMA Channel 0 Current X Count Register */
+#define DMA0_CURR_Y_COUNT 0xFFC00C38 /* DMA Channel 0 Current Y Count Register */
+#define DMA0_IRQ_STATUS 0xFFC00C28 /* DMA Channel 0 Interrupt/Status Register */
+#define DMA0_PERIPHERAL_MAP 0xFFC00C2C /* DMA Channel 0 Peripheral Map Register */
+
+#define DMA1_CONFIG 0xFFC00C48 /* DMA Channel 1 Configuration Register */
+#define DMA1_NEXT_DESC_PTR 0xFFC00C40 /* DMA Channel 1 Next Descriptor Pointer Register */
+#define DMA1_START_ADDR 0xFFC00C44 /* DMA Channel 1 Start Address Register */
+#define DMA1_X_COUNT 0xFFC00C50 /* DMA Channel 1 X Count Register */
+#define DMA1_Y_COUNT 0xFFC00C58 /* DMA Channel 1 Y Count Register */
+#define DMA1_X_MODIFY 0xFFC00C54 /* DMA Channel 1 X Modify Register */
+#define DMA1_Y_MODIFY 0xFFC00C5C /* DMA Channel 1 Y Modify Register */
+#define DMA1_CURR_DESC_PTR 0xFFC00C60 /* DMA Channel 1 Current Descriptor Pointer Register */
+#define DMA1_CURR_ADDR 0xFFC00C64 /* DMA Channel 1 Current Address Register */
+#define DMA1_CURR_X_COUNT 0xFFC00C70 /* DMA Channel 1 Current X Count Register */
+#define DMA1_CURR_Y_COUNT 0xFFC00C78 /* DMA Channel 1 Current Y Count Register */
+#define DMA1_IRQ_STATUS 0xFFC00C68 /* DMA Channel 1 Interrupt/Status Register */
+#define DMA1_PERIPHERAL_MAP 0xFFC00C6C /* DMA Channel 1 Peripheral Map Register */
+
+#define DMA2_CONFIG 0xFFC00C88 /* DMA Channel 2 Configuration Register */
+#define DMA2_NEXT_DESC_PTR 0xFFC00C80 /* DMA Channel 2 Next Descriptor Pointer Register */
+#define DMA2_START_ADDR 0xFFC00C84 /* DMA Channel 2 Start Address Register */
+#define DMA2_X_COUNT 0xFFC00C90 /* DMA Channel 2 X Count Register */
+#define DMA2_Y_COUNT 0xFFC00C98 /* DMA Channel 2 Y Count Register */
+#define DMA2_X_MODIFY 0xFFC00C94 /* DMA Channel 2 X Modify Register */
+#define DMA2_Y_MODIFY 0xFFC00C9C /* DMA Channel 2 Y Modify Register */
+#define DMA2_CURR_DESC_PTR 0xFFC00CA0 /* DMA Channel 2 Current Descriptor Pointer Register */
+#define DMA2_CURR_ADDR 0xFFC00CA4 /* DMA Channel 2 Current Address Register */
+#define DMA2_CURR_X_COUNT 0xFFC00CB0 /* DMA Channel 2 Current X Count Register */
+#define DMA2_CURR_Y_COUNT 0xFFC00CB8 /* DMA Channel 2 Current Y Count Register */
+#define DMA2_IRQ_STATUS 0xFFC00CA8 /* DMA Channel 2 Interrupt/Status Register */
+#define DMA2_PERIPHERAL_MAP 0xFFC00CAC /* DMA Channel 2 Peripheral Map Register */
+
+#define DMA3_CONFIG 0xFFC00CC8 /* DMA Channel 3 Configuration Register */
+#define DMA3_NEXT_DESC_PTR 0xFFC00CC0 /* DMA Channel 3 Next Descriptor Pointer Register */
+#define DMA3_START_ADDR 0xFFC00CC4 /* DMA Channel 3 Start Address Register */
+#define DMA3_X_COUNT 0xFFC00CD0 /* DMA Channel 3 X Count Register */
+#define DMA3_Y_COUNT 0xFFC00CD8 /* DMA Channel 3 Y Count Register */
+#define DMA3_X_MODIFY 0xFFC00CD4 /* DMA Channel 3 X Modify Register */
+#define DMA3_Y_MODIFY 0xFFC00CDC /* DMA Channel 3 Y Modify Register */
+#define DMA3_CURR_DESC_PTR 0xFFC00CE0 /* DMA Channel 3 Current Descriptor Pointer Register */
+#define DMA3_CURR_ADDR 0xFFC00CE4 /* DMA Channel 3 Current Address Register */
+#define DMA3_CURR_X_COUNT 0xFFC00CF0 /* DMA Channel 3 Current X Count Register */
+#define DMA3_CURR_Y_COUNT 0xFFC00CF8 /* DMA Channel 3 Current Y Count Register */
+#define DMA3_IRQ_STATUS 0xFFC00CE8 /* DMA Channel 3 Interrupt/Status Register */
+#define DMA3_PERIPHERAL_MAP 0xFFC00CEC /* DMA Channel 3 Peripheral Map Register */
+
+#define DMA4_CONFIG 0xFFC00D08 /* DMA Channel 4 Configuration Register */
+#define DMA4_NEXT_DESC_PTR 0xFFC00D00 /* DMA Channel 4 Next Descriptor Pointer Register */
+#define DMA4_START_ADDR 0xFFC00D04 /* DMA Channel 4 Start Address Register */
+#define DMA4_X_COUNT 0xFFC00D10 /* DMA Channel 4 X Count Register */
+#define DMA4_Y_COUNT 0xFFC00D18 /* DMA Channel 4 Y Count Register */
+#define DMA4_X_MODIFY 0xFFC00D14 /* DMA Channel 4 X Modify Register */
+#define DMA4_Y_MODIFY 0xFFC00D1C /* DMA Channel 4 Y Modify Register */
+#define DMA4_CURR_DESC_PTR 0xFFC00D20 /* DMA Channel 4 Current Descriptor Pointer Register */
+#define DMA4_CURR_ADDR 0xFFC00D24 /* DMA Channel 4 Current Address Register */
+#define DMA4_CURR_X_COUNT 0xFFC00D30 /* DMA Channel 4 Current X Count Register */
+#define DMA4_CURR_Y_COUNT 0xFFC00D38 /* DMA Channel 4 Current Y Count Register */
+#define DMA4_IRQ_STATUS 0xFFC00D28 /* DMA Channel 4 Interrupt/Status Register */
+#define DMA4_PERIPHERAL_MAP 0xFFC00D2C /* DMA Channel 4 Peripheral Map Register */
+
+#define DMA5_CONFIG 0xFFC00D48 /* DMA Channel 5 Configuration Register */
+#define DMA5_NEXT_DESC_PTR 0xFFC00D40 /* DMA Channel 5 Next Descriptor Pointer Register */
+#define DMA5_START_ADDR 0xFFC00D44 /* DMA Channel 5 Start Address Register */
+#define DMA5_X_COUNT 0xFFC00D50 /* DMA Channel 5 X Count Register */
+#define DMA5_Y_COUNT 0xFFC00D58 /* DMA Channel 5 Y Count Register */
+#define DMA5_X_MODIFY 0xFFC00D54 /* DMA Channel 5 X Modify Register */
+#define DMA5_Y_MODIFY 0xFFC00D5C /* DMA Channel 5 Y Modify Register */
+#define DMA5_CURR_DESC_PTR 0xFFC00D60 /* DMA Channel 5 Current Descriptor Pointer Register */
+#define DMA5_CURR_ADDR 0xFFC00D64 /* DMA Channel 5 Current Address Register */
+#define DMA5_CURR_X_COUNT 0xFFC00D70 /* DMA Channel 5 Current X Count Register */
+#define DMA5_CURR_Y_COUNT 0xFFC00D78 /* DMA Channel 5 Current Y Count Register */
+#define DMA5_IRQ_STATUS 0xFFC00D68 /* DMA Channel 5 Interrupt/Status Register */
+#define DMA5_PERIPHERAL_MAP 0xFFC00D6C /* DMA Channel 5 Peripheral Map Register */
+
+#define DMA6_CONFIG 0xFFC00D88 /* DMA Channel 6 Configuration Register */
+#define DMA6_NEXT_DESC_PTR 0xFFC00D80 /* DMA Channel 6 Next Descriptor Pointer Register */
+#define DMA6_START_ADDR 0xFFC00D84 /* DMA Channel 6 Start Address Register */
+#define DMA6_X_COUNT 0xFFC00D90 /* DMA Channel 6 X Count Register */
+#define DMA6_Y_COUNT 0xFFC00D98 /* DMA Channel 6 Y Count Register */
+#define DMA6_X_MODIFY 0xFFC00D94 /* DMA Channel 6 X Modify Register */
+#define DMA6_Y_MODIFY 0xFFC00D9C /* DMA Channel 6 Y Modify Register */
+#define DMA6_CURR_DESC_PTR 0xFFC00DA0 /* DMA Channel 6 Current Descriptor Pointer Register */
+#define DMA6_CURR_ADDR 0xFFC00DA4 /* DMA Channel 6 Current Address Register */
+#define DMA6_CURR_X_COUNT 0xFFC00DB0 /* DMA Channel 6 Current X Count Register */
+#define DMA6_CURR_Y_COUNT 0xFFC00DB8 /* DMA Channel 6 Current Y Count Register */
+#define DMA6_IRQ_STATUS 0xFFC00DA8 /* DMA Channel 6 Interrupt/Status Register */
+#define DMA6_PERIPHERAL_MAP 0xFFC00DAC /* DMA Channel 6 Peripheral Map Register */
+
+#define DMA7_CONFIG 0xFFC00DC8 /* DMA Channel 7 Configuration Register */
+#define DMA7_NEXT_DESC_PTR 0xFFC00DC0 /* DMA Channel 7 Next Descriptor Pointer Register */
+#define DMA7_START_ADDR 0xFFC00DC4 /* DMA Channel 7 Start Address Register */
+#define DMA7_X_COUNT 0xFFC00DD0 /* DMA Channel 7 X Count Register */
+#define DMA7_Y_COUNT 0xFFC00DD8 /* DMA Channel 7 Y Count Register */
+#define DMA7_X_MODIFY 0xFFC00DD4 /* DMA Channel 7 X Modify Register */
+#define DMA7_Y_MODIFY 0xFFC00DDC /* DMA Channel 7 Y Modify Register */
+#define DMA7_CURR_DESC_PTR 0xFFC00DE0 /* DMA Channel 7 Current Descriptor Pointer Register */
+#define DMA7_CURR_ADDR 0xFFC00DE4 /* DMA Channel 7 Current Address Register */
+#define DMA7_CURR_X_COUNT 0xFFC00DF0 /* DMA Channel 7 Current X Count Register */
+#define DMA7_CURR_Y_COUNT 0xFFC00DF8 /* DMA Channel 7 Current Y Count Register */
+#define DMA7_IRQ_STATUS 0xFFC00DE8 /* DMA Channel 7 Interrupt/Status Register */
+#define DMA7_PERIPHERAL_MAP 0xFFC00DEC /* DMA Channel 7 Peripheral Map Register */
+
+#define MDMA_D1_CONFIG 0xFFC00E88 /* MemDMA Stream 1 Destination Configuration Register */
+#define MDMA_D1_NEXT_DESC_PTR 0xFFC00E80 /* MemDMA Stream 1 Destination Next Descriptor Pointer Register */
+#define MDMA_D1_START_ADDR 0xFFC00E84 /* MemDMA Stream 1 Destination Start Address Register */
+#define MDMA_D1_X_COUNT 0xFFC00E90 /* MemDMA Stream 1 Destination X Count Register */
+#define MDMA_D1_Y_COUNT 0xFFC00E98 /* MemDMA Stream 1 Destination Y Count Register */
+#define MDMA_D1_X_MODIFY 0xFFC00E94 /* MemDMA Stream 1 Destination X Modify Register */
+#define MDMA_D1_Y_MODIFY 0xFFC00E9C /* MemDMA Stream 1 Destination Y Modify Register */
+#define MDMA_D1_CURR_DESC_PTR 0xFFC00EA0 /* MemDMA Stream 1 Destination Current Descriptor Pointer Register */
+#define MDMA_D1_CURR_ADDR 0xFFC00EA4 /* MemDMA Stream 1 Destination Current Address Register */
+#define MDMA_D1_CURR_X_COUNT 0xFFC00EB0 /* MemDMA Stream 1 Destination Current X Count Register */
+#define MDMA_D1_CURR_Y_COUNT 0xFFC00EB8 /* MemDMA Stream 1 Destination Current Y Count Register */
+#define MDMA_D1_IRQ_STATUS 0xFFC00EA8 /* MemDMA Stream 1 Destination Interrupt/Status Register */
+#define MDMA_D1_PERIPHERAL_MAP 0xFFC00EAC /* MemDMA Stream 1 Destination Peripheral Map Register */
+
+#define MDMA_S1_CONFIG 0xFFC00EC8 /* MemDMA Stream 1 Source Configuration Register */
+#define MDMA_S1_NEXT_DESC_PTR 0xFFC00EC0 /* MemDMA Stream 1 Source Next Descriptor Pointer Register */
+#define MDMA_S1_START_ADDR 0xFFC00EC4 /* MemDMA Stream 1 Source Start Address Register */
+#define MDMA_S1_X_COUNT 0xFFC00ED0 /* MemDMA Stream 1 Source X Count Register */
+#define MDMA_S1_Y_COUNT 0xFFC00ED8 /* MemDMA Stream 1 Source Y Count Register */
+#define MDMA_S1_X_MODIFY 0xFFC00ED4 /* MemDMA Stream 1 Source X Modify Register */
+#define MDMA_S1_Y_MODIFY 0xFFC00EDC /* MemDMA Stream 1 Source Y Modify Register */
+#define MDMA_S1_CURR_DESC_PTR 0xFFC00EE0 /* MemDMA Stream 1 Source Current Descriptor Pointer Register */
+#define MDMA_S1_CURR_ADDR 0xFFC00EE4 /* MemDMA Stream 1 Source Current Address Register */
+#define MDMA_S1_CURR_X_COUNT 0xFFC00EF0 /* MemDMA Stream 1 Source Current X Count Register */
+#define MDMA_S1_CURR_Y_COUNT 0xFFC00EF8 /* MemDMA Stream 1 Source Current Y Count Register */
+#define MDMA_S1_IRQ_STATUS 0xFFC00EE8 /* MemDMA Stream 1 Source Interrupt/Status Register */
+#define MDMA_S1_PERIPHERAL_MAP 0xFFC00EEC /* MemDMA Stream 1 Source Peripheral Map Register */
+
+#define MDMA_D0_CONFIG 0xFFC00E08 /* MemDMA Stream 0 Destination Configuration Register */
+#define MDMA_D0_NEXT_DESC_PTR 0xFFC00E00 /* MemDMA Stream 0 Destination Next Descriptor Pointer Register */
+#define MDMA_D0_START_ADDR 0xFFC00E04 /* MemDMA Stream 0 Destination Start Address Register */
+#define MDMA_D0_X_COUNT 0xFFC00E10 /* MemDMA Stream 0 Destination X Count Register */
+#define MDMA_D0_Y_COUNT 0xFFC00E18 /* MemDMA Stream 0 Destination Y Count Register */
+#define MDMA_D0_X_MODIFY 0xFFC00E14 /* MemDMA Stream 0 Destination X Modify Register */
+#define MDMA_D0_Y_MODIFY 0xFFC00E1C /* MemDMA Stream 0 Destination Y Modify Register */
+#define MDMA_D0_CURR_DESC_PTR 0xFFC00E20 /* MemDMA Stream 0 Destination Current Descriptor Pointer Register */
+#define MDMA_D0_CURR_ADDR 0xFFC00E24 /* MemDMA Stream 0 Destination Current Address Register */
+#define MDMA_D0_CURR_X_COUNT 0xFFC00E30 /* MemDMA Stream 0 Destination Current X Count Register */
+#define MDMA_D0_CURR_Y_COUNT 0xFFC00E38 /* MemDMA Stream 0 Destination Current Y Count Register */
+#define MDMA_D0_IRQ_STATUS 0xFFC00E28 /* MemDMA Stream 0 Destination Interrupt/Status Register */
+#define MDMA_D0_PERIPHERAL_MAP 0xFFC00E2C /* MemDMA Stream 0 Destination Peripheral Map Register */
+
+#define MDMA_S0_CONFIG 0xFFC00E48 /* MemDMA Stream 0 Source Configuration Register */
+#define MDMA_S0_NEXT_DESC_PTR 0xFFC00E40 /* MemDMA Stream 0 Source Next Descriptor Pointer Register */
+#define MDMA_S0_START_ADDR 0xFFC00E44 /* MemDMA Stream 0 Source Start Address Register */
+#define MDMA_S0_X_COUNT 0xFFC00E50 /* MemDMA Stream 0 Source X Count Register */
+#define MDMA_S0_Y_COUNT 0xFFC00E58 /* MemDMA Stream 0 Source Y Count Register */
+#define MDMA_S0_X_MODIFY 0xFFC00E54 /* MemDMA Stream 0 Source X Modify Register */
+#define MDMA_S0_Y_MODIFY 0xFFC00E5C /* MemDMA Stream 0 Source Y Modify Register */
+#define MDMA_S0_CURR_DESC_PTR 0xFFC00E60 /* MemDMA Stream 0 Source Current Descriptor Pointer Register */
+#define MDMA_S0_CURR_ADDR 0xFFC00E64 /* MemDMA Stream 0 Source Current Address Register */
+#define MDMA_S0_CURR_X_COUNT 0xFFC00E70 /* MemDMA Stream 0 Source Current X Count Register */
+#define MDMA_S0_CURR_Y_COUNT 0xFFC00E78 /* MemDMA Stream 0 Source Current Y Count Register */
+#define MDMA_S0_IRQ_STATUS 0xFFC00E68 /* MemDMA Stream 0 Source Interrupt/Status Register */
+#define MDMA_S0_PERIPHERAL_MAP 0xFFC00E6C /* MemDMA Stream 0 Source Peripheral Map Register */
+
+/* Parallel Peripheral Interface (PPI) (0xFFC01000 - 0xFFC010FF) */
+
+#define PPI_CONTROL 0xFFC01000 /* PPI Control Register */
+#define PPI_STATUS 0xFFC01004 /* PPI Status Register */
+#define PPI_COUNT 0xFFC01008 /* PPI Transfer Count Register */
+#define PPI_DELAY 0xFFC0100C /* PPI Delay Count Register */
+#define PPI_FRAME 0xFFC01010 /* PPI Frame Length Register */
+
+/*********************************************************************************** */
+/* System MMR Register Bits */
+/******************************************************************************* */
+
+/* ********************* PLL AND RESET MASKS ************************ */
+
+/* PLL_CTL Masks */
+#define PLL_CLKIN 0x00000000 /* Pass CLKIN to PLL */
+#define PLL_CLKIN_DIV2 0x00000001 /* Pass CLKIN/2 to PLL */
+#define PLL_OFF 0x00000002 /* Shut off PLL clocks */
+#define STOPCK_OFF 0x00000008 /* Core clock off */
+#define PDWN 0x00000020 /* Put the PLL in a Deep Sleep state */
+#define BYPASS 0x00000100 /* Bypass the PLL */
+
+/* PLL_DIV Masks */
+
+#define SCLK_DIV(x) (x) /* SCLK = VCO / x */
+
+#define CCLK_DIV1 0x00000000 /* CCLK = VCO / 1 */
+#define CCLK_DIV2 0x00000010 /* CCLK = VCO / 2 */
+#define CCLK_DIV4 0x00000020 /* CCLK = VCO / 4 */
+#define CCLK_DIV8 0x00000030 /* CCLK = VCO / 8 */
+
+/* PLL_STAT Masks */
+#define ACTIVE_PLLENABLED 0x0001 /* Processor In Active Mode With PLL Enabled */
+#define FULL_ON 0x0002 /* Processor In Full On Mode */
+#define ACTIVE_PLLDISABLED 0x0004 /* Processor In Active Mode With PLL Disabled */
+#define PLL_LOCKED 0x0020 /* PLL_LOCKCNT Has Been Reached */
+
+/* CHIPID Masks */
+#define CHIPID_VERSION 0xF0000000
+#define CHIPID_FAMILY 0x0FFFF000
+#define CHIPID_MANUFACTURE 0x00000FFE
+
+/* SWRST Mask */
+#define SYSTEM_RESET 0x00000007 /* Initiates a system software reset */
+
+/* ************* SYSTEM INTERRUPT CONTROLLER MASKS ***************** */
+
+ /* SIC_IAR0 Masks */
+
+#define P0_IVG(x) ((x)-7) /* Peripheral #0 assigned IVG #x */
+#define P1_IVG(x) ((x)-7) << 0x4 /* Peripheral #1 assigned IVG #x */
+#define P2_IVG(x) ((x)-7) << 0x8 /* Peripheral #2 assigned IVG #x */
+#define P3_IVG(x) ((x)-7) << 0xC /* Peripheral #3 assigned IVG #x */
+#define P4_IVG(x) ((x)-7) << 0x10 /* Peripheral #4 assigned IVG #x */
+#define P5_IVG(x) ((x)-7) << 0x14 /* Peripheral #5 assigned IVG #x */
+#define P6_IVG(x) ((x)-7) << 0x18 /* Peripheral #6 assigned IVG #x */
+#define P7_IVG(x) ((x)-7) << 0x1C /* Peripheral #7 assigned IVG #x */
+
+/* SIC_IAR1 Masks */
+
+#define P8_IVG(x) ((x)-7) /* Peripheral #8 assigned IVG #x */
+#define P9_IVG(x) ((x)-7) << 0x4 /* Peripheral #9 assigned IVG #x */
+#define P10_IVG(x) ((x)-7) << 0x8 /* Peripheral #10 assigned IVG #x */
+#define P11_IVG(x) ((x)-7) << 0xC /* Peripheral #11 assigned IVG #x */
+#define P12_IVG(x) ((x)-7) << 0x10 /* Peripheral #12 assigned IVG #x */
+#define P13_IVG(x) ((x)-7) << 0x14 /* Peripheral #13 assigned IVG #x */
+#define P14_IVG(x) ((x)-7) << 0x18 /* Peripheral #14 assigned IVG #x */
+#define P15_IVG(x) ((x)-7) << 0x1C /* Peripheral #15 assigned IVG #x */
+
+/* SIC_IAR2 Masks */
+#define P16_IVG(x) ((x)-7) /* Peripheral #16 assigned IVG #x */
+#define P17_IVG(x) ((x)-7) << 0x4 /* Peripheral #17 assigned IVG #x */
+#define P18_IVG(x) ((x)-7) << 0x8 /* Peripheral #18 assigned IVG #x */
+#define P19_IVG(x) ((x)-7) << 0xC /* Peripheral #19 assigned IVG #x */
+#define P20_IVG(x) ((x)-7) << 0x10 /* Peripheral #20 assigned IVG #x */
+#define P21_IVG(x) ((x)-7) << 0x14 /* Peripheral #21 assigned IVG #x */
+#define P22_IVG(x) ((x)-7) << 0x18 /* Peripheral #22 assigned IVG #x */
+#define P23_IVG(x) ((x)-7) << 0x1C /* Peripheral #23 assigned IVG #x */
+
+/* SIC_IMASK Masks */
+#define SIC_UNMASK_ALL 0x00000000 /* Unmask all peripheral interrupts */
+#define SIC_MASK_ALL 0xFFFFFFFF /* Mask all peripheral interrupts */
+#define SIC_MASK(x) (1 << (x)) /* Mask Peripheral #x interrupt */
+#define SIC_UNMASK(x) (0xFFFFFFFF ^ (1 << (x))) /* Unmask Peripheral #x interrupt */
+
+/* SIC_IWR Masks */
+#define IWR_DISABLE_ALL 0x00000000 /* Wakeup Disable all peripherals */
+#define IWR_ENABLE_ALL 0xFFFFFFFF /* Wakeup Enable all peripherals */
+#define IWR_ENABLE(x) (1 << (x)) /* Wakeup Enable Peripheral #x */
+#define IWR_DISABLE(x) (0xFFFFFFFF ^ (1 << (x))) /* Wakeup Disable Peripheral #x */
+
+/* ********* WATCHDOG TIMER MASKS ********************8 */
+
+/* Watchdog Timer WDOG_CTL Register */
+#define ICTL(x) ((x<<1) & 0x0006)
+#define ENABLE_RESET 0x00000000 /* Set Watchdog Timer to generate reset */
+#define ENABLE_NMI 0x00000002 /* Set Watchdog Timer to generate non-maskable interrupt */
+#define ENABLE_GPI 0x00000004 /* Set Watchdog Timer to generate general-purpose interrupt */
+#define DISABLE_EVT 0x00000006 /* Disable Watchdog Timer interrupts */
+
+#define TMR_EN 0x0000
+#define TMR_DIS 0x0AD0
+#define TRO 0x8000
+
+#define ICTL_P0 0x01
+#define ICTL_P1 0x02
+#define TRO_P 0x0F
+
+/* ***************************** UART CONTROLLER MASKS ********************** */
+
+/* UART_LCR Register */
+
+#define DLAB 0x80
+#define SB 0x40
+#define STP 0x20
+#define EPS 0x10
+#define PEN 0x08
+#define STB 0x04
+#define WLS(x) ((x-5) & 0x03)
+
+#define DLAB_P 0x07
+#define SB_P 0x06
+#define STP_P 0x05
+#define EPS_P 0x04
+#define PEN_P 0x03
+#define STB_P 0x02
+#define WLS_P1 0x01
+#define WLS_P0 0x00
+
+/* UART_MCR Register */
+#define LOOP_ENA 0x10
+#define LOOP_ENA_P 0x04
+
+/* UART_LSR Register */
+#define TEMT 0x40
+#define THRE 0x20
+#define BI 0x10
+#define FE 0x08
+#define PE 0x04
+#define OE 0x02
+#define DR 0x01
+
+#define TEMP_P 0x06
+#define THRE_P 0x05
+#define BI_P 0x04
+#define FE_P 0x03
+#define PE_P 0x02
+#define OE_P 0x01
+#define DR_P 0x00
+
+/* UART_IER Register */
+#define ELSI 0x04
+#define ETBEI 0x02
+#define ERBFI 0x01
+
+#define ELSI_P 0x02
+#define ETBEI_P 0x01
+#define ERBFI_P 0x00
+
+/* UART_IIR Register */
+#define STATUS(x) ((x << 1) & 0x06)
+#define NINT 0x01
+#define STATUS_P1 0x02
+#define STATUS_P0 0x01
+#define NINT_P 0x00
+#define IIR_TX_READY 0x02 /* UART_THR empty */
+#define IIR_RX_READY 0x04 /* Receive data ready */
+#define IIR_LINE_CHANGE 0x06 /* Receive line status */
+#define IIR_STATUS 0x06
+
+/* UART_GCTL Register */
+#define FFE 0x20
+#define FPE 0x10
+#define RPOLC 0x08
+#define TPOLC 0x04
+#define IREN 0x02
+#define UCEN 0x01
+
+#define FFE_P 0x05
+#define FPE_P 0x04
+#define RPOLC_P 0x03
+#define TPOLC_P 0x02
+#define IREN_P 0x01
+#define UCEN_P 0x00
+
+/* ********** SERIAL PORT MASKS ********************** */
+
+/* SPORTx_TCR1 Masks */
+#define TSPEN 0x0001 /* TX enable */
+#define ITCLK 0x0002 /* Internal TX Clock Select */
+#define TDTYPE 0x000C /* TX Data Formatting Select */
+#define TLSBIT 0x0010 /* TX Bit Order */
+#define ITFS 0x0200 /* Internal TX Frame Sync Select */
+#define TFSR 0x0400 /* TX Frame Sync Required Select */
+#define DITFS 0x0800 /* Data Independent TX Frame Sync Select */
+#define LTFS 0x1000 /* Low TX Frame Sync Select */
+#define LATFS 0x2000 /* Late TX Frame Sync Select */
+#define TCKFE 0x4000 /* TX Clock Falling Edge Select */
+
+/* SPORTx_TCR2 Masks */
+#define SLEN 0x001F /*TX Word Length */
+#define TXSE 0x0100 /*TX Secondary Enable */
+#define TSFSE 0x0200 /*TX Stereo Frame Sync Enable */
+#define TRFST 0x0400 /*TX Right-First Data Order */
+
+/* SPORTx_RCR1 Masks */
+#define RSPEN 0x0001 /* RX enable */
+#define IRCLK 0x0002 /* Internal RX Clock Select */
+#define RDTYPE 0x000C /* RX Data Formatting Select */
+#define RULAW 0x0008 /* u-Law enable */
+#define RALAW 0x000C /* A-Law enable */
+#define RLSBIT 0x0010 /* RX Bit Order */
+#define IRFS 0x0200 /* Internal RX Frame Sync Select */
+#define RFSR 0x0400 /* RX Frame Sync Required Select */
+#define LRFS 0x1000 /* Low RX Frame Sync Select */
+#define LARFS 0x2000 /* Late RX Frame Sync Select */
+#define RCKFE 0x4000 /* RX Clock Falling Edge Select */
+
+/* SPORTx_RCR2 Masks */
+#define SLEN 0x001F /*RX Word Length */
+#define RXSE 0x0100 /*RX Secondary Enable */
+#define RSFSE 0x0200 /*RX Stereo Frame Sync Enable */
+#define RRFST 0x0400 /*Right-First Data Order */
+
+/*SPORTx_STAT Masks */
+#define RXNE 0x0001 /*RX FIFO Not Empty Status */
+#define RUVF 0x0002 /*RX Underflow Status */
+#define ROVF 0x0004 /*RX Overflow Status */
+#define TXF 0x0008 /*TX FIFO Full Status */
+#define TUVF 0x0010 /*TX Underflow Status */
+#define TOVF 0x0020 /*TX Overflow Status */
+#define TXHRE 0x0040 /*TX Hold Register Empty */
+
+/*SPORTx_MCMC1 Masks */
+#define SP_WSIZE 0x0000F000 /*Multichannel Window Size Field */
+#define SP_WOFF 0x000003FF /*Multichannel Window Offset Field */
+
+/*SPORTx_MCMC2 Masks */
+#define MCCRM 0x00000003 /*Multichannel Clock Recovery Mode */
+#define MCDTXPE 0x00000004 /*Multichannel DMA Transmit Packing */
+#define MCDRXPE 0x00000008 /*Multichannel DMA Receive Packing */
+#define MCMEN 0x00000010 /*Multichannel Frame Mode Enable */
+#define FSDR 0x00000080 /*Multichannel Frame Sync to Data Relationship */
+#define MFD 0x0000F000 /*Multichannel Frame Delay */
+
+/* ********* PARALLEL PERIPHERAL INTERFACE (PPI) MASKS **************** */
+
+/* PPI_CONTROL Masks */
+#define PORT_EN 0x00000001 /* PPI Port Enable */
+#define PORT_DIR 0x00000002 /* PPI Port Direction */
+#define XFR_TYPE 0x0000000C /* PPI Transfer Type */
+#define PORT_CFG 0x00000030 /* PPI Port Configuration */
+#define FLD_SEL 0x00000040 /* PPI Active Field Select */
+#define PACK_EN 0x00000080 /* PPI Packing Mode */
+#define DMA32 0x00000100 /* PPI 32-bit DMA Enable */
+#define SKIP_EN 0x00000200 /* PPI Skip Element Enable */
+#define SKIP_EO 0x00000400 /* PPI Skip Even/Odd Elements */
+#define DLENGTH 0x00003800 /* PPI Data Length */
+#define DLEN_8 0x0000 /* Data Length = 8 Bits */
+#define DLEN_10 0x0800 /* Data Length = 10 Bits */
+#define DLEN_11 0x1000 /* Data Length = 11 Bits */
+#define DLEN_12 0x1800 /* Data Length = 12 Bits */
+#define DLEN_13 0x2000 /* Data Length = 13 Bits */
+#define DLEN_14 0x2800 /* Data Length = 14 Bits */
+#define DLEN_15 0x3000 /* Data Length = 15 Bits */
+#define DLEN_16 0x3800 /* Data Length = 16 Bits */
+#define DLEN(x) (((x-9) & 0x07) << 11) /* PPI Data Length (only works for x=10-->x=16) */
+#define POL 0x0000C000 /* PPI Signal Polarities */
+
+/* PPI_STATUS Masks */
+#define FLD 0x00000400 /* Field Indicator */
+#define FT_ERR 0x00000800 /* Frame Track Error */
+#define OVR 0x00001000 /* FIFO Overflow Error */
+#define UNDR 0x00002000 /* FIFO Underrun Error */
+#define ERR_DET 0x00004000 /* Error Detected Indicator */
+#define ERR_NCOR 0x00008000 /* Error Not Corrected Indicator */
+
+/* ********** DMA CONTROLLER MASKS *********************8 */
+
+/*DMAx_CONFIG, MDMA_yy_CONFIG Masks */
+#define DMAEN 0x00000001 /* Channel Enable */
+#define WNR 0x00000002 /* Channel Direction (W/R*) */
+#define WDSIZE_8 0x00000000 /* Word Size 8 bits */
+#define WDSIZE_16 0x00000004 /* Word Size 16 bits */
+#define WDSIZE_32 0x00000008 /* Word Size 32 bits */
+#define DMA2D 0x00000010 /* 2D/1D* Mode */
+#define RESTART 0x00000020 /* Restart */
+#define DI_SEL 0x00000040 /* Data Interrupt Select */
+#define DI_EN 0x00000080 /* Data Interrupt Enable */
+#define NDSIZE_0 0x0000 /* Next Descriptor Size = 0 (Stop/Autobuffer) */
+#define NDSIZE_1 0x0100 /* Next Descriptor Size = 1 */
+#define NDSIZE_2 0x0200 /* Next Descriptor Size = 2 */
+#define NDSIZE_3 0x0300 /* Next Descriptor Size = 3 */
+#define NDSIZE_4 0x0400 /* Next Descriptor Size = 4 */
+#define NDSIZE_5 0x0500 /* Next Descriptor Size = 5 */
+#define NDSIZE_6 0x0600 /* Next Descriptor Size = 6 */
+#define NDSIZE_7 0x0700 /* Next Descriptor Size = 7 */
+#define NDSIZE_8 0x0800 /* Next Descriptor Size = 8 */
+#define NDSIZE_9 0x0900 /* Next Descriptor Size = 9 */
+#define NDSIZE 0x00000900 /* Next Descriptor Size */
+#define DMAFLOW 0x00007000 /* Flow Control */
+#define DMAFLOW_STOP 0x0000 /* Stop Mode */
+#define DMAFLOW_AUTO 0x1000 /* Autobuffer Mode */
+#define DMAFLOW_ARRAY 0x4000 /* Descriptor Array Mode */
+#define DMAFLOW_SMALL 0x6000 /* Small Model Descriptor List Mode */
+#define DMAFLOW_LARGE 0x7000 /* Large Model Descriptor List Mode */
+
+#define DMAEN_P 0 /* Channel Enable */
+#define WNR_P 1 /* Channel Direction (W/R*) */
+#define DMA2D_P 4 /* 2D/1D* Mode */
+#define RESTART_P 5 /* Restart */
+#define DI_SEL_P 6 /* Data Interrupt Select */
+#define DI_EN_P 7 /* Data Interrupt Enable */
+
+/*DMAx_IRQ_STATUS, MDMA_yy_IRQ_STATUS Masks */
+
+#define DMA_DONE 0x00000001 /* DMA Done Indicator */
+#define DMA_ERR 0x00000002 /* DMA Error Indicator */
+#define DFETCH 0x00000004 /* Descriptor Fetch Indicator */
+#define DMA_RUN 0x00000008 /* DMA Running Indicator */
+
+#define DMA_DONE_P 0 /* DMA Done Indicator */
+#define DMA_ERR_P 1 /* DMA Error Indicator */
+#define DFETCH_P 2 /* Descriptor Fetch Indicator */
+#define DMA_RUN_P 3 /* DMA Running Indicator */
+
+/*DMAx_PERIPHERAL_MAP, MDMA_yy_PERIPHERAL_MAP Masks */
+
+#define CTYPE 0x00000040 /* DMA Channel Type Indicator */
+#define CTYPE_P 6 /* DMA Channel Type Indicator BIT POSITION */
+#define PCAP8 0x00000080 /* DMA 8-bit Operation Indicator */
+#define PCAP16 0x00000100 /* DMA 16-bit Operation Indicator */
+#define PCAP32 0x00000200 /* DMA 32-bit Operation Indicator */
+#define PCAPWR 0x00000400 /* DMA Write Operation Indicator */
+#define PCAPRD 0x00000800 /* DMA Read Operation Indicator */
+#define PMAP 0x00007000 /* DMA Peripheral Map Field */
+
+/* ************* GENERAL PURPOSE TIMER MASKS ******************** */
+
+/* PWM Timer bit definitions */
+
+/* TIMER_ENABLE Register */
+#define TIMEN0 0x0001
+#define TIMEN1 0x0002
+#define TIMEN2 0x0004
+
+#define TIMEN0_P 0x00
+#define TIMEN1_P 0x01
+#define TIMEN2_P 0x02
+
+/* TIMER_DISABLE Register */
+#define TIMDIS0 0x0001
+#define TIMDIS1 0x0002
+#define TIMDIS2 0x0004
+
+#define TIMDIS0_P 0x00
+#define TIMDIS1_P 0x01
+#define TIMDIS2_P 0x02
+
+/* TIMER_STATUS Register */
+#define TIMIL0 0x0001
+#define TIMIL1 0x0002
+#define TIMIL2 0x0004
+#define TOVL_ERR0 0x0010
+#define TOVL_ERR1 0x0020
+#define TOVL_ERR2 0x0040
+#define TRUN0 0x1000
+#define TRUN1 0x2000
+#define TRUN2 0x4000
+
+#define TIMIL0_P 0x00
+#define TIMIL1_P 0x01
+#define TIMIL2_P 0x02
+#define TOVL_ERR0_P 0x04
+#define TOVL_ERR1_P 0x05
+#define TOVL_ERR2_P 0x06
+#define TRUN0_P 0x0C
+#define TRUN1_P 0x0D
+#define TRUN2_P 0x0E
+
+/* TIMERx_CONFIG Registers */
+#define PWM_OUT 0x0001
+#define WDTH_CAP 0x0002
+#define EXT_CLK 0x0003
+#define PULSE_HI 0x0004
+#define PERIOD_CNT 0x0008
+#define IRQ_ENA 0x0010
+#define TIN_SEL 0x0020
+#define OUT_DIS 0x0040
+#define CLK_SEL 0x0080
+#define TOGGLE_HI 0x0100
+#define EMU_RUN 0x0200
+#define ERR_TYP(x) ((x & 0x03) << 14)
+
+#define TMODE_P0 0x00
+#define TMODE_P1 0x01
+#define PULSE_HI_P 0x02
+#define PERIOD_CNT_P 0x03
+#define IRQ_ENA_P 0x04
+#define TIN_SEL_P 0x05
+#define OUT_DIS_P 0x06
+#define CLK_SEL_P 0x07
+#define TOGGLE_HI_P 0x08
+#define EMU_RUN_P 0x09
+#define ERR_TYP_P0 0x0E
+#define ERR_TYP_P1 0x0F
+
+/*/ ****************** PROGRAMMABLE FLAG MASKS ********************* */
+
+/* General Purpose IO (0xFFC00700 - 0xFFC007FF) Masks */
+#define PF0 0x0001
+#define PF1 0x0002
+#define PF2 0x0004
+#define PF3 0x0008
+#define PF4 0x0010
+#define PF5 0x0020
+#define PF6 0x0040
+#define PF7 0x0080
+#define PF8 0x0100
+#define PF9 0x0200
+#define PF10 0x0400
+#define PF11 0x0800
+#define PF12 0x1000
+#define PF13 0x2000
+#define PF14 0x4000
+#define PF15 0x8000
+
+/* General Purpose IO (0xFFC00700 - 0xFFC007FF) BIT POSITIONS */
+#define PF0_P 0
+#define PF1_P 1
+#define PF2_P 2
+#define PF3_P 3
+#define PF4_P 4
+#define PF5_P 5
+#define PF6_P 6
+#define PF7_P 7
+#define PF8_P 8
+#define PF9_P 9
+#define PF10_P 10
+#define PF11_P 11
+#define PF12_P 12
+#define PF13_P 13
+#define PF14_P 14
+#define PF15_P 15
+
+/* *********** SERIAL PERIPHERAL INTERFACE (SPI) MASKS **************** */
+
+/* SPI_CTL Masks */
+#define TIMOD 0x00000003 /* Transfer initiation mode and interrupt generation */
+#define SZ 0x00000004 /* Send Zero (=0) or last (=1) word when TDBR empty. */
+#define GM 0x00000008 /* When RDBR full, get more (=1) data or discard (=0) incoming Data */
+#define PSSE 0x00000010 /* Enable (=1) Slave-Select input for Master. */
+#define EMISO 0x00000020 /* Enable (=1) MISO pin as an output. */
+#define SPI_LEN 0x00000100 /* Word length (0 => 8 bits, 1 => 16 bits) */
+#define LSBF 0x00000200 /* Data format (0 => MSB sent/received first 1 => LSB sent/received first) */
+#define CPHA 0x00000400 /* Clock phase (0 => SPICLK starts toggling in middle of xfer, 1 => SPICLK toggles at the beginning of xfer. */
+#define CPOL 0x00000800 /* Clock polarity (0 => active-high, 1 => active-low) */
+#define MSTR 0x00001000 /* Configures SPI as master (=1) or slave (=0) */
+#define WOM 0x00002000 /* Open drain (=1) data output enable (for MOSI and MISO) */
+#define SPE 0x00004000 /* SPI module enable (=1), disable (=0) */
+
+/* SPI_FLG Masks */
+#define FLS1 0x00000002 /* Enables (=1) SPI_FLOUT1 as flag output for SPI Slave-select */
+#define FLS2 0x00000004 /* Enables (=1) SPI_FLOUT2 as flag output for SPI Slave-select */
+#define FLS3 0x00000008 /* Enables (=1) SPI_FLOUT3 as flag output for SPI Slave-select */
+#define FLS4 0x00000010 /* Enables (=1) SPI_FLOUT4 as flag output for SPI Slave-select */
+#define FLS5 0x00000020 /* Enables (=1) SPI_FLOUT5 as flag output for SPI Slave-select */
+#define FLS6 0x00000040 /* Enables (=1) SPI_FLOUT6 as flag output for SPI Slave-select */
+#define FLS7 0x00000080 /* Enables (=1) SPI_FLOUT7 as flag output for SPI Slave-select */
+#define FLG1 0x00000200 /* Activates (=0) SPI_FLOUT1 as flag output for SPI Slave-select */
+#define FLG2 0x00000400 /* Activates (=0) SPI_FLOUT2 as flag output for SPI Slave-select */
+#define FLG3 0x00000800 /* Activates (=0) SPI_FLOUT3 as flag output for SPI Slave-select */
+#define FLG4 0x00001000 /* Activates (=0) SPI_FLOUT4 as flag output for SPI Slave-select */
+#define FLG5 0x00002000 /* Activates (=0) SPI_FLOUT5 as flag output for SPI Slave-select */
+#define FLG6 0x00004000 /* Activates (=0) SPI_FLOUT6 as flag output for SPI Slave-select */
+#define FLG7 0x00008000 /* Activates (=0) SPI_FLOUT7 as flag output for SPI Slave-select */
+
+/* SPI_FLG Bit Positions */
+#define FLS1_P 0x00000001 /* Enables (=1) SPI_FLOUT1 as flag output for SPI Slave-select */
+#define FLS2_P 0x00000002 /* Enables (=1) SPI_FLOUT2 as flag output for SPI Slave-select */
+#define FLS3_P 0x00000003 /* Enables (=1) SPI_FLOUT3 as flag output for SPI Slave-select */
+#define FLS4_P 0x00000004 /* Enables (=1) SPI_FLOUT4 as flag output for SPI Slave-select */
+#define FLS5_P 0x00000005 /* Enables (=1) SPI_FLOUT5 as flag output for SPI Slave-select */
+#define FLS6_P 0x00000006 /* Enables (=1) SPI_FLOUT6 as flag output for SPI Slave-select */
+#define FLS7_P 0x00000007 /* Enables (=1) SPI_FLOUT7 as flag output for SPI Slave-select */
+#define FLG1_P 0x00000009 /* Activates (=0) SPI_FLOUT1 as flag output for SPI Slave-select */
+#define FLG2_P 0x0000000A /* Activates (=0) SPI_FLOUT2 as flag output for SPI Slave-select */
+#define FLG3_P 0x0000000B /* Activates (=0) SPI_FLOUT3 as flag output for SPI Slave-select */
+#define FLG4_P 0x0000000C /* Activates (=0) SPI_FLOUT4 as flag output for SPI Slave-select */
+#define FLG5_P 0x0000000D /* Activates (=0) SPI_FLOUT5 as flag output for SPI Slave-select */
+#define FLG6_P 0x0000000E /* Activates (=0) SPI_FLOUT6 as flag output for SPI Slave-select */
+#define FLG7_P 0x0000000F /* Activates (=0) SPI_FLOUT7 as flag output for SPI Slave-select */
+
+/* SPI_STAT Masks */
+#define SPIF 0x00000001 /* Set (=1) when SPI single-word transfer complete */
+#define MODF 0x00000002 /* Set (=1) in a master device when some other device tries to become master */
+#define TXE 0x00000004 /* Set (=1) when transmission occurs with no new data in SPI_TDBR */
+#define TXS 0x00000008 /* SPI_TDBR Data Buffer Status (0=Empty, 1=Full) */
+#define RBSY 0x00000010 /* Set (=1) when data is received with RDBR full */
+#define RXS 0x00000020 /* SPI_RDBR Data Buffer Status (0=Empty, 1=Full) */
+#define TXCOL 0x00000040 /* When set (=1), corrupt data may have been transmitted */
+
+/* ********************* ASYNCHRONOUS MEMORY CONTROLLER MASKS ************* */
+
+/* AMGCTL Masks */
+#define AMCKEN 0x00000001 /* Enable CLKOUT */
+#define AMBEN_B0 0x00000002 /* Enable Asynchronous Memory Bank 0 only */
+#define AMBEN_B0_B1 0x00000004 /* Enable Asynchronous Memory Banks 0 & 1 only */
+#define AMBEN_B0_B1_B2 0x00000006 /* Enable Asynchronous Memory Banks 0, 1, and 2 */
+#define AMBEN_ALL 0x00000008 /* Enable Asynchronous Memory Banks (all) 0, 1, 2, and 3 */
+
+/* AMGCTL Bit Positions */
+#define AMCKEN_P 0x00000000 /* Enable CLKOUT */
+#define AMBEN_P0 0x00000001 /* Asynchronous Memory Enable, 000 - banks 0-3 disabled, 001 - Bank 0 enabled */
+#define AMBEN_P1 0x00000002 /* Asynchronous Memory Enable, 010 - banks 0&1 enabled, 011 - banks 0-3 enabled */
+#define AMBEN_P2 0x00000003 /* Asynchronous Memory Enable, 1xx - All banks (bank 0, 1, 2, and 3) enabled */
+
+/* AMBCTL0 Masks */
+#define B0RDYEN 0x00000001 /* Bank 0 RDY Enable, 0=disable, 1=enable */
+#define B0RDYPOL 0x00000002 /* Bank 0 RDY Active high, 0=active low, 1=active high */
+#define B0TT_1 0x00000004 /* Bank 0 Transition Time from Read to Write = 1 cycle */
+#define B0TT_2 0x00000008 /* Bank 0 Transition Time from Read to Write = 2 cycles */
+#define B0TT_3 0x0000000C /* Bank 0 Transition Time from Read to Write = 3 cycles */
+#define B0TT_4 0x00000000 /* Bank 0 Transition Time from Read to Write = 4 cycles */
+#define B0ST_1 0x00000010 /* Bank 0 Setup Time from AOE asserted to Read/Write asserted=1 cycle */
+#define B0ST_2 0x00000020 /* Bank 0 Setup Time from AOE asserted to Read/Write asserted=2 cycles */
+#define B0ST_3 0x00000030 /* Bank 0 Setup Time from AOE asserted to Read/Write asserted=3 cycles */
+#define B0ST_4 0x00000000 /* Bank 0 Setup Time from AOE asserted to Read/Write asserted=4 cycles */
+#define B0HT_1 0x00000040 /* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 1 cycle */
+#define B0HT_2 0x00000080 /* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 2 cycles */
+#define B0HT_3 0x000000C0 /* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 3 cycles */
+#define B0HT_0 0x00000000 /* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 0 cycles */
+#define B0RAT_1 0x00000100 /* Bank 0 Read Access Time = 1 cycle */
+#define B0RAT_2 0x00000200 /* Bank 0 Read Access Time = 2 cycles */
+#define B0RAT_3 0x00000300 /* Bank 0 Read Access Time = 3 cycles */
+#define B0RAT_4 0x00000400 /* Bank 0 Read Access Time = 4 cycles */
+#define B0RAT_5 0x00000500 /* Bank 0 Read Access Time = 5 cycles */
+#define B0RAT_6 0x00000600 /* Bank 0 Read Access Time = 6 cycles */
+#define B0RAT_7 0x00000700 /* Bank 0 Read Access Time = 7 cycles */
+#define B0RAT_8 0x00000800 /* Bank 0 Read Access Time = 8 cycles */
+#define B0RAT_9 0x00000900 /* Bank 0 Read Access Time = 9 cycles */
+#define B0RAT_10 0x00000A00 /* Bank 0 Read Access Time = 10 cycles */
+#define B0RAT_11 0x00000B00 /* Bank 0 Read Access Time = 11 cycles */
+#define B0RAT_12 0x00000C00 /* Bank 0 Read Access Time = 12 cycles */
+#define B0RAT_13 0x00000D00 /* Bank 0 Read Access Time = 13 cycles */
+#define B0RAT_14 0x00000E00 /* Bank 0 Read Access Time = 14 cycles */
+#define B0RAT_15 0x00000F00 /* Bank 0 Read Access Time = 15 cycles */
+#define B0WAT_1 0x00001000 /* Bank 0 Write Access Time = 1 cycle */
+#define B0WAT_2 0x00002000 /* Bank 0 Write Access Time = 2 cycles */
+#define B0WAT_3 0x00003000 /* Bank 0 Write Access Time = 3 cycles */
+#define B0WAT_4 0x00004000 /* Bank 0 Write Access Time = 4 cycles */
+#define B0WAT_5 0x00005000 /* Bank 0 Write Access Time = 5 cycles */
+#define B0WAT_6 0x00006000 /* Bank 0 Write Access Time = 6 cycles */
+#define B0WAT_7 0x00007000 /* Bank 0 Write Access Time = 7 cycles */
+#define B0WAT_8 0x00008000 /* Bank 0 Write Access Time = 8 cycles */
+#define B0WAT_9 0x00009000 /* Bank 0 Write Access Time = 9 cycles */
+#define B0WAT_10 0x0000A000 /* Bank 0 Write Access Time = 10 cycles */
+#define B0WAT_11 0x0000B000 /* Bank 0 Write Access Time = 11 cycles */
+#define B0WAT_12 0x0000C000 /* Bank 0 Write Access Time = 12 cycles */
+#define B0WAT_13 0x0000D000 /* Bank 0 Write Access Time = 13 cycles */
+#define B0WAT_14 0x0000E000 /* Bank 0 Write Access Time = 14 cycles */
+#define B0WAT_15 0x0000F000 /* Bank 0 Write Access Time = 15 cycles */
+#define B1RDYEN 0x00010000 /* Bank 1 RDY enable, 0=disable, 1=enable */
+#define B1RDYPOL 0x00020000 /* Bank 1 RDY Active high, 0=active low, 1=active high */
+#define B1TT_1 0x00040000 /* Bank 1 Transition Time from Read to Write = 1 cycle */
+#define B1TT_2 0x00080000 /* Bank 1 Transition Time from Read to Write = 2 cycles */
+#define B1TT_3 0x000C0000 /* Bank 1 Transition Time from Read to Write = 3 cycles */
+#define B1TT_4 0x00000000 /* Bank 1 Transition Time from Read to Write = 4 cycles */
+#define B1ST_1 0x00100000 /* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 1 cycle */
+#define B1ST_2 0x00200000 /* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 2 cycles */
+#define B1ST_3 0x00300000 /* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 3 cycles */
+#define B1ST_4 0x00000000 /* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 4 cycles */
+#define B1HT_1 0x00400000 /* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 1 cycle */
+#define B1HT_2 0x00800000 /* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 2 cycles */
+#define B1HT_3 0x00C00000 /* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 3 cycles */
+#define B1HT_0 0x00000000 /* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 0 cycles */
+#define B1RAT_1 0x01000000 /* Bank 1 Read Access Time = 1 cycle */
+#define B1RAT_2 0x02000000 /* Bank 1 Read Access Time = 2 cycles */
+#define B1RAT_3 0x03000000 /* Bank 1 Read Access Time = 3 cycles */
+#define B1RAT_4 0x04000000 /* Bank 1 Read Access Time = 4 cycles */
+#define B1RAT_5 0x05000000 /* Bank 1 Read Access Time = 5 cycles */
+#define B1RAT_6 0x06000000 /* Bank 1 Read Access Time = 6 cycles */
+#define B1RAT_7 0x07000000 /* Bank 1 Read Access Time = 7 cycles */
+#define B1RAT_8 0x08000000 /* Bank 1 Read Access Time = 8 cycles */
+#define B1RAT_9 0x09000000 /* Bank 1 Read Access Time = 9 cycles */
+#define B1RAT_10 0x0A000000 /* Bank 1 Read Access Time = 10 cycles */
+#define B1RAT_11 0x0B000000 /* Bank 1 Read Access Time = 11 cycles */
+#define B1RAT_12 0x0C000000 /* Bank 1 Read Access Time = 12 cycles */
+#define B1RAT_13 0x0D000000 /* Bank 1 Read Access Time = 13 cycles */
+#define B1RAT_14 0x0E000000 /* Bank 1 Read Access Time = 14 cycles */
+#define B1RAT_15 0x0F000000 /* Bank 1 Read Access Time = 15 cycles */
+#define B1WAT_1 0x10000000 /* Bank 1 Write Access Time = 1 cycle */
+#define B1WAT_2 0x20000000 /* Bank 1 Write Access Time = 2 cycles */
+#define B1WAT_3 0x30000000 /* Bank 1 Write Access Time = 3 cycles */
+#define B1WAT_4 0x40000000 /* Bank 1 Write Access Time = 4 cycles */
+#define B1WAT_5 0x50000000 /* Bank 1 Write Access Time = 5 cycles */
+#define B1WAT_6 0x60000000 /* Bank 1 Write Access Time = 6 cycles */
+#define B1WAT_7 0x70000000 /* Bank 1 Write Access Time = 7 cycles */
+#define B1WAT_8 0x80000000 /* Bank 1 Write Access Time = 8 cycles */
+#define B1WAT_9 0x90000000 /* Bank 1 Write Access Time = 9 cycles */
+#define B1WAT_10 0xA0000000 /* Bank 1 Write Access Time = 10 cycles */
+#define B1WAT_11 0xB0000000 /* Bank 1 Write Access Time = 11 cycles */
+#define B1WAT_12 0xC0000000 /* Bank 1 Write Access Time = 12 cycles */
+#define B1WAT_13 0xD0000000 /* Bank 1 Write Access Time = 13 cycles */
+#define B1WAT_14 0xE0000000 /* Bank 1 Write Access Time = 14 cycles */
+#define B1WAT_15 0xF0000000 /* Bank 1 Write Access Time = 15 cycles */
+
+/* AMBCTL1 Masks */
+#define B2RDYEN 0x00000001 /* Bank 2 RDY Enable, 0=disable, 1=enable */
+#define B2RDYPOL 0x00000002 /* Bank 2 RDY Active high, 0=active low, 1=active high */
+#define B2TT_1 0x00000004 /* Bank 2 Transition Time from Read to Write = 1 cycle */
+#define B2TT_2 0x00000008 /* Bank 2 Transition Time from Read to Write = 2 cycles */
+#define B2TT_3 0x0000000C /* Bank 2 Transition Time from Read to Write = 3 cycles */
+#define B2TT_4 0x00000000 /* Bank 2 Transition Time from Read to Write = 4 cycles */
+#define B2ST_1 0x00000010 /* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 1 cycle */
+#define B2ST_2 0x00000020 /* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 2 cycles */
+#define B2ST_3 0x00000030 /* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 3 cycles */
+#define B2ST_4 0x00000000 /* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 4 cycles */
+#define B2HT_1 0x00000040 /* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 1 cycle */
+#define B2HT_2 0x00000080 /* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 2 cycles */
+#define B2HT_3 0x000000C0 /* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 3 cycles */
+#define B2HT_0 0x00000000 /* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 0 cycles */
+#define B2RAT_1 0x00000100 /* Bank 2 Read Access Time = 1 cycle */
+#define B2RAT_2 0x00000200 /* Bank 2 Read Access Time = 2 cycles */
+#define B2RAT_3 0x00000300 /* Bank 2 Read Access Time = 3 cycles */
+#define B2RAT_4 0x00000400 /* Bank 2 Read Access Time = 4 cycles */
+#define B2RAT_5 0x00000500 /* Bank 2 Read Access Time = 5 cycles */
+#define B2RAT_6 0x00000600 /* Bank 2 Read Access Time = 6 cycles */
+#define B2RAT_7 0x00000700 /* Bank 2 Read Access Time = 7 cycles */
+#define B2RAT_8 0x00000800 /* Bank 2 Read Access Time = 8 cycles */
+#define B2RAT_9 0x00000900 /* Bank 2 Read Access Time = 9 cycles */
+#define B2RAT_10 0x00000A00 /* Bank 2 Read Access Time = 10 cycles */
+#define B2RAT_11 0x00000B00 /* Bank 2 Read Access Time = 11 cycles */
+#define B2RAT_12 0x00000C00 /* Bank 2 Read Access Time = 12 cycles */
+#define B2RAT_13 0x00000D00 /* Bank 2 Read Access Time = 13 cycles */
+#define B2RAT_14 0x00000E00 /* Bank 2 Read Access Time = 14 cycles */
+#define B2RAT_15 0x00000F00 /* Bank 2 Read Access Time = 15 cycles */
+#define B2WAT_1 0x00001000 /* Bank 2 Write Access Time = 1 cycle */
+#define B2WAT_2 0x00002000 /* Bank 2 Write Access Time = 2 cycles */
+#define B2WAT_3 0x00003000 /* Bank 2 Write Access Time = 3 cycles */
+#define B2WAT_4 0x00004000 /* Bank 2 Write Access Time = 4 cycles */
+#define B2WAT_5 0x00005000 /* Bank 2 Write Access Time = 5 cycles */
+#define B2WAT_6 0x00006000 /* Bank 2 Write Access Time = 6 cycles */
+#define B2WAT_7 0x00007000 /* Bank 2 Write Access Time = 7 cycles */
+#define B2WAT_8 0x00008000 /* Bank 2 Write Access Time = 8 cycles */
+#define B2WAT_9 0x00009000 /* Bank 2 Write Access Time = 9 cycles */
+#define B2WAT_10 0x0000A000 /* Bank 2 Write Access Time = 10 cycles */
+#define B2WAT_11 0x0000B000 /* Bank 2 Write Access Time = 11 cycles */
+#define B2WAT_12 0x0000C000 /* Bank 2 Write Access Time = 12 cycles */
+#define B2WAT_13 0x0000D000 /* Bank 2 Write Access Time = 13 cycles */
+#define B2WAT_14 0x0000E000 /* Bank 2 Write Access Time = 14 cycles */
+#define B2WAT_15 0x0000F000 /* Bank 2 Write Access Time = 15 cycles */
+#define B3RDYEN 0x00010000 /* Bank 3 RDY enable, 0=disable, 1=enable */
+#define B3RDYPOL 0x00020000 /* Bank 3 RDY Active high, 0=active low, 1=active high */
+#define B3TT_1 0x00040000 /* Bank 3 Transition Time from Read to Write = 1 cycle */
+#define B3TT_2 0x00080000 /* Bank 3 Transition Time from Read to Write = 2 cycles */
+#define B3TT_3 0x000C0000 /* Bank 3 Transition Time from Read to Write = 3 cycles */
+#define B3TT_4 0x00000000 /* Bank 3 Transition Time from Read to Write = 4 cycles */
+#define B3ST_1 0x00100000 /* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 1 cycle */
+#define B3ST_2 0x00200000 /* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 2 cycles */
+#define B3ST_3 0x00300000 /* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 3 cycles */
+#define B3ST_4 0x00000000 /* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 4 cycles */
+#define B3HT_1 0x00400000 /* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 1 cycle */
+#define B3HT_2 0x00800000 /* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 2 cycles */
+#define B3HT_3 0x00C00000 /* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 3 cycles */
+#define B3HT_0 0x00000000 /* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 0 cycles */
+#define B3RAT_1 0x01000000 /* Bank 3 Read Access Time = 1 cycle */
+#define B3RAT_2 0x02000000 /* Bank 3 Read Access Time = 2 cycles */
+#define B3RAT_3 0x03000000 /* Bank 3 Read Access Time = 3 cycles */
+#define B3RAT_4 0x04000000 /* Bank 3 Read Access Time = 4 cycles */
+#define B3RAT_5 0x05000000 /* Bank 3 Read Access Time = 5 cycles */
+#define B3RAT_6 0x06000000 /* Bank 3 Read Access Time = 6 cycles */
+#define B3RAT_7 0x07000000 /* Bank 3 Read Access Time = 7 cycles */
+#define B3RAT_8 0x08000000 /* Bank 3 Read Access Time = 8 cycles */
+#define B3RAT_9 0x09000000 /* Bank 3 Read Access Time = 9 cycles */
+#define B3RAT_10 0x0A000000 /* Bank 3 Read Access Time = 10 cycles */
+#define B3RAT_11 0x0B000000 /* Bank 3 Read Access Time = 11 cycles */
+#define B3RAT_12 0x0C000000 /* Bank 3 Read Access Time = 12 cycles */
+#define B3RAT_13 0x0D000000 /* Bank 3 Read Access Time = 13 cycles */
+#define B3RAT_14 0x0E000000 /* Bank 3 Read Access Time = 14 cycles */
+#define B3RAT_15 0x0F000000 /* Bank 3 Read Access Time = 15 cycles */
+#define B3WAT_1 0x10000000 /* Bank 3 Write Access Time = 1 cycle */
+#define B3WAT_2 0x20000000 /* Bank 3 Write Access Time = 2 cycles */
+#define B3WAT_3 0x30000000 /* Bank 3 Write Access Time = 3 cycles */
+#define B3WAT_4 0x40000000 /* Bank 3 Write Access Time = 4 cycles */
+#define B3WAT_5 0x50000000 /* Bank 3 Write Access Time = 5 cycles */
+#define B3WAT_6 0x60000000 /* Bank 3 Write Access Time = 6 cycles */
+#define B3WAT_7 0x70000000 /* Bank 3 Write Access Time = 7 cycles */
+#define B3WAT_8 0x80000000 /* Bank 3 Write Access Time = 8 cycles */
+#define B3WAT_9 0x90000000 /* Bank 3 Write Access Time = 9 cycles */
+#define B3WAT_10 0xA0000000 /* Bank 3 Write Access Time = 10 cycles */
+#define B3WAT_11 0xB0000000 /* Bank 3 Write Access Time = 11 cycles */
+#define B3WAT_12 0xC0000000 /* Bank 3 Write Access Time = 12 cycles */
+#define B3WAT_13 0xD0000000 /* Bank 3 Write Access Time = 13 cycles */
+#define B3WAT_14 0xE0000000 /* Bank 3 Write Access Time = 14 cycles */
+#define B3WAT_15 0xF0000000 /* Bank 3 Write Access Time = 15 cycles */
+
+/* ********************** SDRAM CONTROLLER MASKS *************************** */
+
+/* SDGCTL Masks */
+#define SCTLE 0x00000001 /* Enable SCLK[0], /SRAS, /SCAS, /SWE, SDQM[3:0] */
+#define CL_2 0x00000008 /* SDRAM CAS latency = 2 cycles */
+#define CL_3 0x0000000C /* SDRAM CAS latency = 3 cycles */
+#define PFE 0x00000010 /* Enable SDRAM prefetch */
+#define PFP 0x00000020 /* Prefetch has priority over AMC requests */
+#define TRAS_1 0x00000040 /* SDRAM tRAS = 1 cycle */
+#define TRAS_2 0x00000080 /* SDRAM tRAS = 2 cycles */
+#define TRAS_3 0x000000C0 /* SDRAM tRAS = 3 cycles */
+#define TRAS_4 0x00000100 /* SDRAM tRAS = 4 cycles */
+#define TRAS_5 0x00000140 /* SDRAM tRAS = 5 cycles */
+#define TRAS_6 0x00000180 /* SDRAM tRAS = 6 cycles */
+#define TRAS_7 0x000001C0 /* SDRAM tRAS = 7 cycles */
+#define TRAS_8 0x00000200 /* SDRAM tRAS = 8 cycles */
+#define TRAS_9 0x00000240 /* SDRAM tRAS = 9 cycles */
+#define TRAS_10 0x00000280 /* SDRAM tRAS = 10 cycles */
+#define TRAS_11 0x000002C0 /* SDRAM tRAS = 11 cycles */
+#define TRAS_12 0x00000300 /* SDRAM tRAS = 12 cycles */
+#define TRAS_13 0x00000340 /* SDRAM tRAS = 13 cycles */
+#define TRAS_14 0x00000380 /* SDRAM tRAS = 14 cycles */
+#define TRAS_15 0x000003C0 /* SDRAM tRAS = 15 cycles */
+#define TRP_1 0x00000800 /* SDRAM tRP = 1 cycle */
+#define TRP_2 0x00001000 /* SDRAM tRP = 2 cycles */
+#define TRP_3 0x00001800 /* SDRAM tRP = 3 cycles */
+#define TRP_4 0x00002000 /* SDRAM tRP = 4 cycles */
+#define TRP_5 0x00002800 /* SDRAM tRP = 5 cycles */
+#define TRP_6 0x00003000 /* SDRAM tRP = 6 cycles */
+#define TRP_7 0x00003800 /* SDRAM tRP = 7 cycles */
+#define TRCD_1 0x00008000 /* SDRAM tRCD = 1 cycle */
+#define TRCD_2 0x00010000 /* SDRAM tRCD = 2 cycles */
+#define TRCD_3 0x00018000 /* SDRAM tRCD = 3 cycles */
+#define TRCD_4 0x00020000 /* SDRAM tRCD = 4 cycles */
+#define TRCD_5 0x00028000 /* SDRAM tRCD = 5 cycles */
+#define TRCD_6 0x00030000 /* SDRAM tRCD = 6 cycles */
+#define TRCD_7 0x00038000 /* SDRAM tRCD = 7 cycles */
+#define TWR_1 0x00080000 /* SDRAM tWR = 1 cycle */
+#define TWR_2 0x00100000 /* SDRAM tWR = 2 cycles */
+#define TWR_3 0x00180000 /* SDRAM tWR = 3 cycles */
+#define PUPSD 0x00200000 /*Power-up start delay */
+#define PSM 0x00400000 /* SDRAM power-up sequence = Precharge, mode register set, 8 CBR refresh cycles */
+#define PSS 0x00800000 /* enable SDRAM power-up sequence on next SDRAM access */
+#define SRFS 0x01000000 /* Start SDRAM self-refresh mode */
+#define EBUFE 0x02000000 /* Enable external buffering timing */
+#define FBBRW 0x04000000 /* Fast back-to-back read write enable */
+#define EMREN 0x10000000 /* Extended mode register enable */
+#define TCSR 0x20000000 /* Temp compensated self refresh value 85 deg C */
+#define CDDBG 0x40000000 /* Tristate SDRAM controls during bus grant */
+
+/* EBIU_SDBCTL Masks */
+#define EBE 0x00000001 /* Enable SDRAM external bank */
+#define EBSZ_16 0x00000000 /* SDRAM external bank size = 16MB */
+#define EBSZ_32 0x00000002 /* SDRAM external bank size = 32MB */
+#define EBSZ_64 0x00000004 /* SDRAM external bank size = 64MB */
+#define EBSZ_128 0x00000006 /* SDRAM external bank size = 128MB */
+#define EBCAW_8 0x00000000 /* SDRAM external bank column address width = 8 bits */
+#define EBCAW_9 0x00000010 /* SDRAM external bank column address width = 9 bits */
+#define EBCAW_10 0x00000020 /* SDRAM external bank column address width = 9 bits */
+#define EBCAW_11 0x00000030 /* SDRAM external bank column address width = 9 bits */
+
+/* EBIU_SDSTAT Masks */
+#define SDCI 0x00000001 /* SDRAM controller is idle */
+#define SDSRA 0x00000002 /* SDRAM SDRAM self refresh is active */
+#define SDPUA 0x00000004 /* SDRAM power up active */
+#define SDRS 0x00000008 /* SDRAM is in reset state */
+#define SDEASE 0x00000010 /* SDRAM EAB sticky error status - W1C */
+#define BGSTAT 0x00000020 /* Bus granted */
+
+/*VR_CTL Masks*/
+#define WAKE 0x100
+#define VLEV_6 0x60
+#define VLEV_7 0x70
+#define VLEV_8 0x80
+#define VLEV_9 0x90
+#define VLEV_10 0xA0
+#define VLEV_11 0xB0
+#define VLEV_12 0xC0
+#define VLEV_13 0xD0
+#define VLEV_14 0xE0
+#define VLEV_15 0xF0
+#define FREQ_3 0x03
+
+#endif /* _DEF_BF532_H */
diff --git a/include/asm-blackfin/mach-bf533/dma.h b/include/asm-blackfin/mach-bf533/dma.h
new file mode 100644
index 0000000..bd9d5e9
--- /dev/null
+++ b/include/asm-blackfin/mach-bf533/dma.h
@@ -0,0 +1,54 @@
+/*****************************************************************************
+*
+* BF-533/2/1 Specific Declarations
+*
+****************************************************************************/
+/*
+ * File: include/asm-blackfin/mach-bf533/dma.h
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Rev:
+ *
+ * Modified:
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.
+ * If not, write to the Free Software Foundation,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef _MACH_DMA_H_
+#define _MACH_DMA_H_
+
+#define MAX_BLACKFIN_DMA_CHANNEL 12
+
+#define CH_PPI 0
+#define CH_SPORT0_RX 1
+#define CH_SPORT0_TX 2
+#define CH_SPORT1_RX 3
+#define CH_SPORT1_TX 4
+#define CH_SPI 5
+#define CH_UART_RX 6
+#define CH_UART_TX 7
+#define CH_MEM_STREAM0_DEST 8 /* TX */
+#define CH_MEM_STREAM0_SRC 9 /* RX */
+#define CH_MEM_STREAM1_DEST 10 /* TX */
+#define CH_MEM_STREAM1_SRC 11 /* RX */
+
+#endif
diff --git a/include/asm-blackfin/mach-bf533/irq.h b/include/asm-blackfin/mach-bf533/irq.h
new file mode 100644
index 0000000..9879e68
--- /dev/null
+++ b/include/asm-blackfin/mach-bf533/irq.h
@@ -0,0 +1,177 @@
+/*
+ * File: include/asm-blackfin/mach-bf533/defBF532.h
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Rev:
+ *
+ * Modified:
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.
+ * If not, write to the Free Software Foundation,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef _BF533_IRQ_H_
+#define _BF533_IRQ_H_
+
+/*
+ * Interrupt source definitions
+ Event Source Core Event Name
+Core Emulation **
+ Events (highest priority) EMU 0
+ Reset RST 1
+ NMI NMI 2
+ Exception EVX 3
+ Reserved -- 4
+ Hardware Error IVHW 5
+ Core Timer IVTMR 6 *
+ PLL Wakeup Interrupt IVG7 7
+ DMA Error (generic) IVG7 8
+ PPI Error Interrupt IVG7 9
+ SPORT0 Error Interrupt IVG7 10
+ SPORT1 Error Interrupt IVG7 11
+ SPI Error Interrupt IVG7 12
+ UART Error Interrupt IVG7 13
+ RTC Interrupt IVG8 14
+ DMA0 Interrupt (PPI) IVG8 15
+ DMA1 (SPORT0 RX) IVG9 16
+ DMA2 (SPORT0 TX) IVG9 17
+ DMA3 (SPORT1 RX) IVG9 18
+ DMA4 (SPORT1 TX) IVG9 19
+ DMA5 (PPI) IVG10 20
+ DMA6 (UART RX) IVG10 21
+ DMA7 (UART TX) IVG10 22
+ Timer0 IVG11 23
+ Timer1 IVG11 24
+ Timer2 IVG11 25
+ PF Interrupt A IVG12 26
+ PF Interrupt B IVG12 27
+ DMA8/9 Interrupt IVG13 28
+ DMA10/11 Interrupt IVG13 29
+ Watchdog Timer IVG13 30
+ Software Interrupt 1 IVG14 31
+ Software Interrupt 2 --
+ (lowest priority) IVG15 32 *
+ */
+#define SYS_IRQS 32
+#define NR_PERI_INTS 24
+
+/* The ABSTRACT IRQ definitions */
+/** the first seven of the following are fixed, the rest you change if you need to **/
+#define IRQ_EMU 0 /*Emulation */
+#define IRQ_RST 1 /*reset */
+#define IRQ_NMI 2 /*Non Maskable */
+#define IRQ_EVX 3 /*Exception */
+#define IRQ_UNUSED 4 /*- unused interrupt*/
+#define IRQ_HWERR 5 /*Hardware Error */
+#define IRQ_CORETMR 6 /*Core timer */
+
+#define IRQ_PLL_WAKEUP 7 /*PLL Wakeup Interrupt */
+#define IRQ_DMA_ERROR 8 /*DMA Error (general) */
+#define IRQ_PPI_ERROR 9 /*PPI Error Interrupt */
+#define IRQ_SPORT0_ERROR 10 /*SPORT0 Error Interrupt */
+#define IRQ_SPORT1_ERROR 11 /*SPORT1 Error Interrupt */
+#define IRQ_SPI_ERROR 12 /*SPI Error Interrupt */
+#define IRQ_UART_ERROR 13 /*UART Error Interrupt */
+#define IRQ_RTC 14 /*RTC Interrupt */
+#define IRQ_PPI 15 /*DMA0 Interrupt (PPI) */
+#define IRQ_SPORT0_RX 16 /*DMA1 Interrupt (SPORT0 RX) */
+#define IRQ_SPORT0_TX 17 /*DMA2 Interrupt (SPORT0 TX) */
+#define IRQ_SPORT1_RX 18 /*DMA3 Interrupt (SPORT1 RX) */
+#define IRQ_SPORT1_TX 19 /*DMA4 Interrupt (SPORT1 TX) */
+#define IRQ_SPI 20 /*DMA5 Interrupt (SPI) */
+#define IRQ_UART_RX 21 /*DMA6 Interrupt (UART RX) */
+#define IRQ_UART_TX 22 /*DMA7 Interrupt (UART TX) */
+#define IRQ_TMR0 23 /*Timer 0 */
+#define IRQ_TMR1 24 /*Timer 1 */
+#define IRQ_TMR2 25 /*Timer 2 */
+#define IRQ_PROG_INTA 26 /*Programmable Flags A (8) */
+#define IRQ_PROG_INTB 27 /*Programmable Flags B (8) */
+#define IRQ_MEM_DMA0 28 /*DMA8/9 Interrupt (Memory DMA Stream 0) */
+#define IRQ_MEM_DMA1 29 /*DMA10/11 Interrupt (Memory DMA Stream 1) */
+#define IRQ_WATCH 30 /*Watch Dog Timer */
+
+#define IRQ_SW_INT1 31 /*Software Int 1 */
+#define IRQ_SW_INT2 32 /*Software Int 2 (reserved for SYSCALL) */
+
+#define IRQ_PF0 33
+#define IRQ_PF1 34
+#define IRQ_PF2 35
+#define IRQ_PF3 36
+#define IRQ_PF4 37
+#define IRQ_PF5 38
+#define IRQ_PF6 39
+#define IRQ_PF7 40
+#define IRQ_PF8 41
+#define IRQ_PF9 42
+#define IRQ_PF10 43
+#define IRQ_PF11 44
+#define IRQ_PF12 45
+#define IRQ_PF13 46
+#define IRQ_PF14 47
+#define IRQ_PF15 48
+
+#ifdef CONFIG_IRQCHIP_DEMUX_GPIO
+#define NR_IRQS (IRQ_PF15+1)
+#else
+#define NR_IRQS SYS_IRQS
+#endif
+
+#define IVG7 7
+#define IVG8 8
+#define IVG9 9
+#define IVG10 10
+#define IVG11 11
+#define IVG12 12
+#define IVG13 13
+#define IVG14 14
+#define IVG15 15
+
+/* IAR0 BIT FIELDS*/
+#define RTC_ERROR_POS 28
+#define UART_ERROR_POS 24
+#define SPORT1_ERROR_POS 20
+#define SPI_ERROR_POS 16
+#define SPORT0_ERROR_POS 12
+#define PPI_ERROR_POS 8
+#define DMA_ERROR_POS 4
+#define PLLWAKE_ERROR_POS 0
+
+/* IAR1 BIT FIELDS*/
+#define DMA7_UARTTX_POS 28
+#define DMA6_UARTRX_POS 24
+#define DMA5_SPI_POS 20
+#define DMA4_SPORT1TX_POS 16
+#define DMA3_SPORT1RX_POS 12
+#define DMA2_SPORT0TX_POS 8
+#define DMA1_SPORT0RX_POS 4
+#define DMA0_PPI_POS 0
+
+/* IAR2 BIT FIELDS*/
+#define WDTIMER_POS 28
+#define MEMDMA1_POS 24
+#define MEMDMA0_POS 20
+#define PFB_POS 16
+#define PFA_POS 12
+#define TIMER2_POS 8
+#define TIMER1_POS 4
+#define TIMER0_POS 0
+
+#endif /* _BF533_IRQ_H_ */
diff --git a/include/asm-blackfin/mach-bf533/mem_init.h b/include/asm-blackfin/mach-bf533/mem_init.h
new file mode 100644
index 0000000..1620dae
--- /dev/null
+++ b/include/asm-blackfin/mach-bf533/mem_init.h
@@ -0,0 +1,316 @@
+/*
+ * File: include/asm-blackfin/mach-bf533/mem_init.h
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Rev:
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.
+ * If not, write to the Free Software Foundation,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#if (CONFIG_MEM_MT48LC16M16A2TG_75 || CONFIG_MEM_MT48LC64M4A2FB_7E || CONFIG_MEM_GENERIC_BOARD)
+#if (CONFIG_SCLK_HZ > 119402985)
+#define SDRAM_tRP TRP_2
+#define SDRAM_tRP_num 2
+#define SDRAM_tRAS TRAS_7
+#define SDRAM_tRAS_num 7
+#define SDRAM_tRCD TRCD_2
+#define SDRAM_tWR TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 104477612) && (CONFIG_SCLK_HZ <= 119402985)
+#define SDRAM_tRP TRP_2
+#define SDRAM_tRP_num 2
+#define SDRAM_tRAS TRAS_6
+#define SDRAM_tRAS_num 6
+#define SDRAM_tRCD TRCD_2
+#define SDRAM_tWR TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 8955223) && (CONFIG_SCLK_HZ <= 104477612)
+#define SDRAM_tRP TRP_2
+#define SDRAM_tRP_num 2
+#define SDRAM_tRAS TRAS_5
+#define SDRAM_tRAS_num 5
+#define SDRAM_tRCD TRCD_2
+#define SDRAM_tWR TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 74626866) && (CONFIG_SCLK_HZ <= 89552239)
+#define SDRAM_tRP TRP_2
+#define SDRAM_tRP_num 2
+#define SDRAM_tRAS TRAS_4
+#define SDRAM_tRAS_num 4
+#define SDRAM_tRCD TRCD_2
+#define SDRAM_tWR TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 66666667) && (CONFIG_SCLK_HZ <= 74626866)
+#define SDRAM_tRP TRP_2
+#define SDRAM_tRP_num 2
+#define SDRAM_tRAS TRAS_3
+#define SDRAM_tRAS_num 3
+#define SDRAM_tRCD TRCD_2
+#define SDRAM_tWR TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 59701493) && (CONFIG_SCLK_HZ <= 66666667)
+#define SDRAM_tRP TRP_1
+#define SDRAM_tRP_num 1
+#define SDRAM_tRAS TRAS_4
+#define SDRAM_tRAS_num 3
+#define SDRAM_tRCD TRCD_1
+#define SDRAM_tWR TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 44776119) && (CONFIG_SCLK_HZ <= 59701493)
+#define SDRAM_tRP TRP_1
+#define SDRAM_tRP_num 1
+#define SDRAM_tRAS TRAS_3
+#define SDRAM_tRAS_num 3
+#define SDRAM_tRCD TRCD_1
+#define SDRAM_tWR TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 29850746) && (CONFIG_SCLK_HZ <= 44776119)
+#define SDRAM_tRP TRP_1
+#define SDRAM_tRP_num 1
+#define SDRAM_tRAS TRAS_2
+#define SDRAM_tRAS_num 2
+#define SDRAM_tRCD TRCD_1
+#define SDRAM_tWR TWR_2
+#endif
+#if (CONFIG_SCLK_HZ <= 29850746)
+#define SDRAM_tRP TRP_1
+#define SDRAM_tRP_num 1
+#define SDRAM_tRAS TRAS_1
+#define SDRAM_tRAS_num 1
+#define SDRAM_tRCD TRCD_1
+#define SDRAM_tWR TWR_2
+#endif
+#endif
+
+#if (CONFIG_MEM_MT48LC16M16A2TG_75)
+ /*SDRAM INFORMATION: */
+#define SDRAM_Tref 64 /* Refresh period in milliseconds */
+#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */
+#define SDRAM_CL CL_3
+#endif
+
+#if (CONFIG_MEM_MT48LC64M4A2FB_7E)
+ /*SDRAM INFORMATION: */
+#define SDRAM_Tref 64 /* Refresh period in milliseconds */
+#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */
+#define SDRAM_CL CL_3
+#endif
+
+#if (CONFIG_MEM_GENERIC_BOARD)
+ /*SDRAM INFORMATION: Modify this for your board */
+#define SDRAM_Tref 64 /* Refresh period in milliseconds */
+#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */
+#define SDRAM_CL CL_3
+#endif
+
+#if (CONFIG_MEM_SIZE == 128)
+#define SDRAM_SIZE EBSZ_128
+#endif
+#if (CONFIG_MEM_SIZE == 64)
+#define SDRAM_SIZE EBSZ_64
+#endif
+#if (CONFIG_MEM_SIZE == 32)
+#define SDRAM_SIZE EBSZ_32
+#endif
+#if (CONFIG_MEM_SIZE == 16)
+#define SDRAM_SIZE EBSZ_16
+#endif
+#if (CONFIG_MEM_ADD_WIDTH == 11)
+#define SDRAM_WIDTH EBCAW_11
+#endif
+#if (CONFIG_MEM_ADD_WIDTH == 10)
+#define SDRAM_WIDTH EBCAW_10
+#endif
+#if (CONFIG_MEM_ADD_WIDTH == 9)
+#define SDRAM_WIDTH EBCAW_9
+#endif
+#if (CONFIG_MEM_ADD_WIDTH == 8)
+#define SDRAM_WIDTH EBCAW_8
+#endif
+
+#define mem_SDBCTL (SDRAM_WIDTH | SDRAM_SIZE | EBE)
+
+/* Equation from section 17 (p17-46) of BF533 HRM */
+#define mem_SDRRC (((CONFIG_SCLK_HZ / 1000) * SDRAM_Tref) / SDRAM_NRA) - (SDRAM_tRAS_num + SDRAM_tRP_num)
+
+/* Enable SCLK Out */
+#define mem_SDGCTL (SCTLE | SDRAM_CL | SDRAM_tRAS | SDRAM_tRP | SDRAM_tRCD | SDRAM_tWR | PSS)
+
+#if defined CONFIG_CLKIN_HALF
+#define CLKIN_HALF 1
+#else
+#define CLKIN_HALF 0
+#endif
+
+#if defined CONFIG_PLL_BYPASS
+#define PLL_BYPASS 1
+#else
+#define PLL_BYPASS 0
+#endif
+
+/***************************************Currently Not Being Used *********************************/
+#define flash_EBIU_AMBCTL_WAT ((CONFIG_FLASH_SPEED_BWAT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
+#define flash_EBIU_AMBCTL_RAT ((CONFIG_FLASH_SPEED_BRAT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
+#define flash_EBIU_AMBCTL_HT ((CONFIG_FLASH_SPEED_BHT * 4) / (4000000000 / CONFIG_SCLK_HZ))
+#define flash_EBIU_AMBCTL_ST ((CONFIG_FLASH_SPEED_BST * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
+#define flash_EBIU_AMBCTL_TT ((CONFIG_FLASH_SPEED_BTT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
+
+#if (flash_EBIU_AMBCTL_TT > 3)
+#define flash_EBIU_AMBCTL0_TT B0TT_4
+#endif
+#if (flash_EBIU_AMBCTL_TT == 3)
+#define flash_EBIU_AMBCTL0_TT B0TT_3
+#endif
+#if (flash_EBIU_AMBCTL_TT == 2)
+#define flash_EBIU_AMBCTL0_TT B0TT_2
+#endif
+#if (flash_EBIU_AMBCTL_TT < 2)
+#define flash_EBIU_AMBCTL0_TT B0TT_1
+#endif
+
+#if (flash_EBIU_AMBCTL_ST > 3)
+#define flash_EBIU_AMBCTL0_ST B0ST_4
+#endif
+#if (flash_EBIU_AMBCTL_ST == 3)
+#define flash_EBIU_AMBCTL0_ST B0ST_3
+#endif
+#if (flash_EBIU_AMBCTL_ST == 2)
+#define flash_EBIU_AMBCTL0_ST B0ST_2
+#endif
+#if (flash_EBIU_AMBCTL_ST < 2)
+#define flash_EBIU_AMBCTL0_ST B0ST_1
+#endif
+
+#if (flash_EBIU_AMBCTL_HT > 2)
+#define flash_EBIU_AMBCTL0_HT B0HT_3
+#endif
+#if (flash_EBIU_AMBCTL_HT == 2)
+#define flash_EBIU_AMBCTL0_HT B0HT_2
+#endif
+#if (flash_EBIU_AMBCTL_HT == 1)
+#define flash_EBIU_AMBCTL0_HT B0HT_1
+#endif
+#if (flash_EBIU_AMBCTL_HT == 0 && CONFIG_FLASH_SPEED_BHT == 0)
+#define flash_EBIU_AMBCTL0_HT B0HT_0
+#endif
+#if (flash_EBIU_AMBCTL_HT == 0 && CONFIG_FLASH_SPEED_BHT != 0)
+#define flash_EBIU_AMBCTL0_HT B0HT_1
+#endif
+
+#if (flash_EBIU_AMBCTL_WAT > 14)
+#define flash_EBIU_AMBCTL0_WAT B0WAT_15
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 14)
+#define flash_EBIU_AMBCTL0_WAT B0WAT_14
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 13)
+#define flash_EBIU_AMBCTL0_WAT B0WAT_13
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 12)
+#define flash_EBIU_AMBCTL0_WAT B0WAT_12
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 11)
+#define flash_EBIU_AMBCTL0_WAT B0WAT_11
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 10)
+#define flash_EBIU_AMBCTL0_WAT B0WAT_10
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 9)
+#define flash_EBIU_AMBCTL0_WAT B0WAT_9
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 8)
+#define flash_EBIU_AMBCTL0_WAT B0WAT_8
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 7)
+#define flash_EBIU_AMBCTL0_WAT B0WAT_7
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 6)
+#define flash_EBIU_AMBCTL0_WAT B0WAT_6
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 5)
+#define flash_EBIU_AMBCTL0_WAT B0WAT_5
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 4)
+#define flash_EBIU_AMBCTL0_WAT B0WAT_4
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 3)
+#define flash_EBIU_AMBCTL0_WAT B0WAT_3
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 2)
+#define flash_EBIU_AMBCTL0_WAT B0WAT_2
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 1)
+#define flash_EBIU_AMBCTL0_WAT B0WAT_1
+#endif
+
+#if (flash_EBIU_AMBCTL_RAT > 14)
+#define flash_EBIU_AMBCTL0_RAT B0RAT_15
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 14)
+#define flash_EBIU_AMBCTL0_RAT B0RAT_14
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 13)
+#define flash_EBIU_AMBCTL0_RAT B0RAT_13
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 12)
+#define flash_EBIU_AMBCTL0_RAT B0RAT_12
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 11)
+#define flash_EBIU_AMBCTL0_RAT B0RAT_11
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 10)
+#define flash_EBIU_AMBCTL0_RAT B0RAT_10
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 9)
+#define flash_EBIU_AMBCTL0_RAT B0RAT_9
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 8)
+#define flash_EBIU_AMBCTL0_RAT B0RAT_8
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 7)
+#define flash_EBIU_AMBCTL0_RAT B0RAT_7
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 6)
+#define flash_EBIU_AMBCTL0_RAT B0RAT_6
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 5)
+#define flash_EBIU_AMBCTL0_RAT B0RAT_5
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 4)
+#define flash_EBIU_AMBCTL0_RAT B0RAT_4
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 3)
+#define flash_EBIU_AMBCTL0_RAT B0RAT_3
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 2)
+#define flash_EBIU_AMBCTL0_RAT B0RAT_2
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 1)
+#define flash_EBIU_AMBCTL0_RAT B0RAT_1
+#endif
+
+#define flash_EBIU_AMBCTL0 \
+ (flash_EBIU_AMBCTL0_WAT | flash_EBIU_AMBCTL0_RAT | flash_EBIU_AMBCTL0_HT | \
+ flash_EBIU_AMBCTL0_ST | flash_EBIU_AMBCTL0_TT | CONFIG_FLASH_SPEED_RDYEN)
diff --git a/include/asm-blackfin/mach-bf533/mem_map.h b/include/asm-blackfin/mach-bf533/mem_map.h
new file mode 100644
index 0000000..e84baa3
--- /dev/null
+++ b/include/asm-blackfin/mach-bf533/mem_map.h
@@ -0,0 +1,168 @@
+
+/*
+ * File: include/asm-blackfin/mach-bf533/mem_map.h
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Rev:
+ *
+ * Modified:
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.
+ * If not, write to the Free Software Foundation,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef _MEM_MAP_533_H_
+#define _MEM_MAP_533_H_
+
+#define COREMMR_BASE 0xFFE00000 /* Core MMRs */
+#define SYSMMR_BASE 0xFFC00000 /* System MMRs */
+
+/* Async Memory Banks */
+#define ASYNC_BANK3_BASE 0x20300000 /* Async Bank 3 */
+#define ASYNC_BANK3_SIZE 0x00100000 /* 1M */
+#define ASYNC_BANK2_BASE 0x20200000 /* Async Bank 2 */
+#define ASYNC_BANK2_SIZE 0x00100000 /* 1M */
+#define ASYNC_BANK1_BASE 0x20100000 /* Async Bank 1 */
+#define ASYNC_BANK1_SIZE 0x00100000 /* 1M */
+#define ASYNC_BANK0_BASE 0x20000000 /* Async Bank 0 */
+#define ASYNC_BANK0_SIZE 0x00100000 /* 1M */
+
+/* Boot ROM Memory */
+
+#define BOOT_ROM_START 0xEF000000
+
+/* Level 1 Memory */
+
+#ifdef CONFIG_BLKFIN_CACHE
+#define BLKFIN_ICACHESIZE (16*1024)
+#else
+#define BLKFIN_ICACHESIZE (0*1024)
+#endif
+
+/* Memory Map for ADSP-BF533 processors */
+
+#ifdef CONFIG_BF533
+#define L1_CODE_START 0xFFA00000
+#define L1_DATA_A_START 0xFF800000
+#define L1_DATA_B_START 0xFF900000
+
+#ifdef CONFIG_BLKFIN_CACHE
+#define L1_CODE_LENGTH (0x14000 - 0x4000)
+#else
+#define L1_CODE_LENGTH 0x14000
+#endif
+
+#ifdef CONFIG_BLKFIN_DCACHE
+
+#ifdef CONFIG_BLKFIN_DCACHE_BANKA
+#define DMEM_CNTR (ACACHE_BSRAM | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH (0x8000 - 0x4000)
+#define L1_DATA_B_LENGTH 0x8000
+#define BLKFIN_DCACHESIZE (16*1024)
+#define BLKFIN_DSUPBANKS 1
+#else
+#define DMEM_CNTR (ACACHE_BCACHE | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH (0x8000 - 0x4000)
+#define L1_DATA_B_LENGTH (0x8000 - 0x4000)
+#define BLKFIN_DCACHESIZE (32*1024)
+#define BLKFIN_DSUPBANKS 2
+#endif
+
+#else
+#define DMEM_CNTR (ASRAM_BSRAM | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH 0x8000
+#define L1_DATA_B_LENGTH 0x8000
+#define BLKFIN_DCACHESIZE (0*1024)
+#define BLKFIN_DSUPBANKS 0
+#endif /*CONFIG_BLKFIN_DCACHE*/
+#endif
+
+/* Memory Map for ADSP-BF532 processors */
+
+#ifdef CONFIG_BF532
+#define L1_CODE_START 0xFFA08000
+#define L1_DATA_A_START 0xFF804000
+#define L1_DATA_B_START 0xFF904000
+
+#ifdef CONFIG_BLKFIN_CACHE
+#define L1_CODE_LENGTH (0xC000 - 0x4000)
+#else
+#define L1_CODE_LENGTH 0xC000
+#endif
+
+#ifdef CONFIG_BLKFIN_DCACHE
+
+#ifdef CONFIG_BLKFIN_DCACHE_BANKA
+#define DMEM_CNTR (ACACHE_BSRAM | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH (0x4000 - 0x4000)
+#define L1_DATA_B_LENGTH 0x4000
+#define BLKFIN_DCACHESIZE (16*1024)
+#define BLKFIN_DSUPBANKS 1
+
+#else
+#define DMEM_CNTR (ACACHE_BCACHE | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH (0x4000 - 0x4000)
+#define L1_DATA_B_LENGTH (0x4000 - 0x4000)
+#define BLKFIN_DCACHESIZE (32*1024)
+#define BLKFIN_DSUPBANKS 2
+#endif
+
+#else
+#define DMEM_CNTR (ASRAM_BSRAM | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH 0x4000
+#define L1_DATA_B_LENGTH 0x4000
+#define BLKFIN_DCACHESIZE (0*1024)
+#define BLKFIN_DSUPBANKS 0
+#endif /*CONFIG_BLKFIN_DCACHE*/
+#endif
+
+/* Memory Map for ADSP-BF531 processors */
+
+#ifdef CONFIG_BF531
+#define L1_CODE_START 0xFFA08000
+#define L1_DATA_A_START 0xFF804000
+#define L1_DATA_B_START 0xFF904000
+#define L1_CODE_LENGTH 0x4000
+#define L1_DATA_B_LENGTH 0x0000
+
+
+#ifdef CONFIG_BLKFIN_DCACHE
+#define DMEM_CNTR (ACACHE_BSRAM | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH (0x4000 - 0x4000)
+#define BLKFIN_DCACHESIZE (16*1024)
+#define BLKFIN_DSUPBANKS 1
+#else
+#define DMEM_CNTR (ASRAM_BSRAM | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH 0x4000
+#define BLKFIN_DCACHESIZE (0*1024)
+#define BLKFIN_DSUPBANKS 0
+#endif
+
+#endif
+
+/* Scratch Pad Memory */
+
+#if defined(CONFIG_BF533) || defined(CONFIG_BF532) || defined(CONFIG_BF531)
+#define L1_SCRATCH_START 0xFFB00000
+#define L1_SCRATCH_LENGTH 0x1000
+#endif
+
+#endif /* _MEM_MAP_533_H_ */
diff --git a/include/asm-blackfin/mach-bf537/anomaly.h b/include/asm-blackfin/mach-bf537/anomaly.h
new file mode 100644
index 0000000..7f040f5
--- /dev/null
+++ b/include/asm-blackfin/mach-bf537/anomaly.h
@@ -0,0 +1,120 @@
+
+/*
+ * File: include/asm-blackfin/mach-bf537/anomaly.h
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Rev:
+ *
+ * Modified:
+ *
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.
+ * If not, write to the Free Software Foundation,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+/* This file shoule be up to date with:
+ * - Revision J, June 1, 2006; ADSP-BF537 Blackfin Processor Anomaly List
+ * - Revision I, June 1, 2006; ADSP-BF536 Blackfin Processor Anomaly List
+ * - Revision J, June 1, 2006; ADSP-BF534 Blackfin Processor Anomaly List
+ */
+
+#ifndef _MACH_ANOMALY_H_
+#define _MACH_ANOMALY_H_
+
+/* We do not support 0.1 silicon - sorry */
+#if (defined(CONFIG_BF_REV_0_1))
+#error Kernel will not work on BF537/6/4 Version 0.1
+#endif
+
+#if (defined(CONFIG_BF_REV_0_3) || defined(CONFIG_BF_REV_0_2))
+#define ANOMALY_05000074 /* A multi issue instruction with dsp32shiftimm in
+ slot1 and store of a P register in slot 2 is not
+ supported */
+#define ANOMALY_05000119 /* DMA_RUN bit is not valid after a Peripheral Receive
+ Channel DMA stops */
+#define ANOMALY_05000122 /* Rx.H can not be used to access 16-bit System MMR
+ registers. */
+#define ANOMALY_05000166 /* PPI Data Lengths Between 8 and 16 do not zero out
+ upper bits*/
+#define ANOMALY_05000180 /* PPI_DELAY not functional in PPI modes with 0 frame
+ syncs */
+#if (defined(CONFIG_BF537) || defined(CONFIG_BF536))
+#define ANOMALY_05000247 /* CLKIN Buffer Output Enable Reset Behavior Is
+ Changed */
+#endif
+#define ANOMALY_05000265 /* Sensitivity to noise with slow input edge rates on
+ SPORT external receive and transmit clocks. */
+#define ANOMALY_05000272 /* Certain data cache write through modes fail for
+ VDDint <=0.9V */
+#define ANOMALY_05000273 /* Writes to Synchronous SDRAM memory may be lost */
+#define ANOMALY_05000277 /* Writes to a flag data register one SCLK cycle after
+ an edge is detected may clear interrupt */
+#define ANOMALY_05000281 /* False Hardware Error Exception when ISR context is
+ not restored */
+#define ANOMALY_05000282 /* Memory DMA corruption with 32-bit data and traffic
+ control */
+#define ANOMALY_05000283 /* A system MMR write is stalled indefinitely when
+ killed in a particular stage*/
+#define ANOMALY_05000312 /* Errors when SSYNC, CSYNC, or loads to LT, LB and LC
+ registers are interrupted */
+#endif
+
+#if defined(CONFIG_BF_REV_0_2)
+#define ANOMALY_05000244 /* With instruction cache enabled, a CSYNC or SSYNC or
+ IDLE around a Change of Control causes
+ unpredictable results */
+#define ANOMALY_05000250 /* Incorrect Bit-Shift of Data Word in Multichannel
+ (TDM) */
+#if (defined(CONFIG_BF537) || defined(CONFIG_BF536))
+#define ANOMALY_05000252 /* EMAC Tx DMA error after an early frame abort */
+#endif
+#define ANOMALY_05000253 /* Maximum external clock speed for Timers */
+#define ANOMALY_05000255 /* Entering Hibernate Mode with RTC Seconds event
+ interrupt not functional */
+#if (defined(CONFIG_BF537) || defined(CONFIG_BF536))
+#define ANOMALY_05000256 /* EMAC MDIO input latched on wrong MDC edge */
+#endif
+#define ANOMALY_05000257 /* An interrupt or exception during short Hardware
+ loops may cause the instruction fetch unit to
+ malfunction */
+#define ANOMALY_05000258 /* Instruction Cache is corrupted when bit 9 and 12 of
+ the ICPLB Data registers differ */
+#define ANOMALY_05000260 /* ICPLB_STATUS MMR register may be corrupted */
+#define ANOMALY_05000261 /* DCPLB_FAULT_ADDR MMR register may be corrupted */
+#define ANOMALY_05000262 /* Stores to data cache may be lost */
+#define ANOMALY_05000263 /* Hardware loop corrupted when taking an ICPLB exception */
+#define ANOMALY_05000264 /* A Sync instruction (CSYNC, SSYNC) or an IDLE
+ instruction will cause an infinite stall in the
+ second to last instruction in a hardware loop */
+#define ANOMALY_05000268 /* Memory DMA error when peripheral DMA is running
+ and non-zero DEB_TRAFFIC_PERIOD value */
+#define ANOMALY_05000270 /* High I/O activity causes the output voltage of the
+ internal voltage regulator (VDDint) to decrease */
+#define ANOMALY_05000277 /* Writes to a flag data register one SCLK cycle after
+ an edge is detected may clear interrupt */
+#define ANOMALY_05000278 /* Disabling Peripherals with DMA running may cause
+ DMA system instability */
+#define ANOMALY_05000280 /* SPI Master boot mode does not work well with
+ Atmel Dataflash devices */
+
+#endif /* CONFIG_BF_REV_0_2 */
+
+#endif /* _MACH_ANOMALY_H_ */
diff --git a/include/asm-blackfin/mach-bf537/bf537.h b/include/asm-blackfin/mach-bf537/bf537.h
new file mode 100644
index 0000000..b8924cd
--- /dev/null
+++ b/include/asm-blackfin/mach-bf537/bf537.h
@@ -0,0 +1,287 @@
+/*
+ * File: include/asm-blackfin/mach-bf537/bf537.h
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description: SYSTEM MMR REGISTER AND MEMORY MAP FOR ADSP-BF537
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef __MACH_BF537_H__
+#define __MACH_BF537_H__
+
+#define SUPPORTED_REVID 2
+
+/* Masks for generic ERROR IRQ demultiplexing used in int-priority-sc.c */
+
+#define SPI_ERR_MASK (TXCOL | RBSY | MODF | TXE) /* SPI_STAT */
+#define SPORT_ERR_MASK (ROVF | RUVF | TOVF | TUVF) /* SPORTx_STAT */
+#define PPI_ERR_MASK (0xFFFF & ~FLD) /* PPI_STATUS */
+#define EMAC_ERR_MASK (PHYINT | MMCINT | RXFSINT | TXFSINT | WAKEDET | RXDMAERR | TXDMAERR | STMDONE) /* EMAC_SYSTAT */
+#define UART_ERR_MASK_STAT1 (0x4) /* UARTx_IIR */
+#define UART_ERR_MASK_STAT0 (0x2) /* UARTx_IIR */
+#define CAN_ERR_MASK (EWTIF | EWRIF | EPIF | BOIF | WUIF | UIAIF | AAIF | RMLIF | UCEIF | EXTIF | ADIF) /* CAN_GIF */
+
+#define OFFSET_(x) ((x) & 0x0000FFFF)
+
+/*some misc defines*/
+#define IMASK_IVG15 0x8000
+#define IMASK_IVG14 0x4000
+#define IMASK_IVG13 0x2000
+#define IMASK_IVG12 0x1000
+
+#define IMASK_IVG11 0x0800
+#define IMASK_IVG10 0x0400
+#define IMASK_IVG9 0x0200
+#define IMASK_IVG8 0x0100
+
+#define IMASK_IVG7 0x0080
+#define IMASK_IVGTMR 0x0040
+#define IMASK_IVGHW 0x0020
+
+/***************************/
+
+
+#define BLKFIN_DSUBBANKS 4
+#define BLKFIN_DWAYS 2
+#define BLKFIN_DLINES 64
+#define BLKFIN_ISUBBANKS 4
+#define BLKFIN_IWAYS 4
+#define BLKFIN_ILINES 32
+
+#define WAY0_L 0x1
+#define WAY1_L 0x2
+#define WAY01_L 0x3
+#define WAY2_L 0x4
+#define WAY02_L 0x5
+#define WAY12_L 0x6
+#define WAY012_L 0x7
+
+#define WAY3_L 0x8
+#define WAY03_L 0x9
+#define WAY13_L 0xA
+#define WAY013_L 0xB
+
+#define WAY32_L 0xC
+#define WAY320_L 0xD
+#define WAY321_L 0xE
+#define WAYALL_L 0xF
+
+#define DMC_ENABLE (2<<2) /*yes, 2, not 1 */
+
+/********************************* EBIU Settings ************************************/
+#define AMBCTL0VAL ((CONFIG_BANK_1 << 16) | CONFIG_BANK_0)
+#define AMBCTL1VAL ((CONFIG_BANK_3 << 16) | CONFIG_BANK_2)
+
+#ifdef CONFIG_C_AMBEN_ALL
+#define V_AMBEN AMBEN_ALL
+#endif
+#ifdef CONFIG_C_AMBEN
+#define V_AMBEN 0x0
+#endif
+#ifdef CONFIG_C_AMBEN_B0
+#define V_AMBEN AMBEN_B0
+#endif
+#ifdef CONFIG_C_AMBEN_B0_B1
+#define V_AMBEN AMBEN_B0_B1
+#endif
+#ifdef CONFIG_C_AMBEN_B0_B1_B2
+#define V_AMBEN AMBEN_B0_B1_B2
+#endif
+#ifdef CONFIG_C_AMCKEN
+#define V_AMCKEN AMCKEN
+#else
+#define V_AMCKEN 0x0
+#endif
+#ifdef CONFIG_C_CDPRIO
+#define V_CDPRIO 0x100
+#else
+#define V_CDPRIO 0x0
+#endif
+
+#define AMGCTLVAL (V_AMBEN | V_AMCKEN | V_CDPRIO)
+
+#define MAX_VC 650000000
+#define MIN_VC 50000000
+
+/********************************PLL Settings **************************************/
+#ifdef CONFIG_BFIN_KERNEL_CLOCK
+#if (CONFIG_VCO_MULT < 0)
+#error "VCO Multiplier is less than 0. Please select a different value"
+#endif
+
+#if (CONFIG_VCO_MULT == 0)
+#error "VCO Multiplier should be greater than 0. Please select a different value"
+#endif
+
+#if (CONFIG_VCO_MULT > 64)
+#error "VCO Multiplier is more than 64. Please select a different value"
+#endif
+
+#ifndef CONFIG_CLKIN_HALF
+#define CONFIG_VCO_HZ (CONFIG_CLKIN_HZ * CONFIG_VCO_MULT)
+#else
+#define CONFIG_VCO_HZ ((CONFIG_CLKIN_HZ * CONFIG_VCO_MULT)/2)
+#endif
+
+#ifndef CONFIG_PLL_BYPASS
+#define CONFIG_CCLK_HZ (CONFIG_VCO_HZ/CONFIG_CCLK_DIV)
+#define CONFIG_SCLK_HZ (CONFIG_VCO_HZ/CONFIG_SCLK_DIV)
+#else
+#define CONFIG_CCLK_HZ CONFIG_CLKIN_HZ
+#define CONFIG_SCLK_HZ CONFIG_CLKIN_HZ
+#endif
+
+#if (CONFIG_SCLK_DIV < 1)
+#error "SCLK DIV cannot be less than 1 or more than 15. Please select a proper value"
+#endif
+
+#if (CONFIG_SCLK_DIV > 15)
+#error "SCLK DIV cannot be less than 1 or more than 15. Please select a proper value"
+#endif
+
+#if (CONFIG_CCLK_DIV != 1)
+#if (CONFIG_CCLK_DIV != 2)
+#if (CONFIG_CCLK_DIV != 4)
+#if (CONFIG_CCLK_DIV != 8)
+#error "CCLK DIV can be 1,2,4 or 8 only. Please select a proper value"
+#endif
+#endif
+#endif
+#endif
+
+#if (CONFIG_VCO_HZ > MAX_VC)
+#error "VCO selected is more than maximum value. Please change the VCO multipler"
+#endif
+
+#if (CONFIG_SCLK_HZ > 133000000)
+#error "Sclk value selected is more than maximum. Please select a proper value for SCLK multiplier"
+#endif
+
+#if (CONFIG_SCLK_HZ < 27000000)
+#error "Sclk value selected is less than minimum. Please select a proper value for SCLK multiplier"
+#endif
+
+#if (CONFIG_SCLK_HZ >= CONFIG_CCLK_HZ)
+#if (CONFIG_SCLK_HZ != CONFIG_CLKIN_HZ)
+#if (CONFIG_CCLK_HZ != CONFIG_CLKIN_HZ)
+#error "Please select sclk less than cclk"
+#endif
+#endif
+#endif
+
+#if (CONFIG_CCLK_DIV == 1)
+#define CONFIG_CCLK_ACT_DIV CCLK_DIV1
+#endif
+#if (CONFIG_CCLK_DIV == 2)
+#define CONFIG_CCLK_ACT_DIV CCLK_DIV2
+#endif
+#if (CONFIG_CCLK_DIV == 4)
+#define CONFIG_CCLK_ACT_DIV CCLK_DIV4
+#endif
+#if (CONFIG_CCLK_DIV == 8)
+#define CONFIG_CCLK_ACT_DIV CCLK_DIV8
+#endif
+#ifndef CONFIG_CCLK_ACT_DIV
+#define CONFIG_CCLK_ACT_DIV CONFIG_CCLK_DIV_not_defined_properly
+#endif
+
+#if defined(ANOMALY_05000273) && (CONFIG_CCLK_DIV == 1)
+#error ANOMALY 05000273, please make sure CCLK is at least 2x SCLK
+#endif
+
+#endif /* CONFIG_BFIN_KERNEL_CLOCK */
+
+#ifdef CONFIG_BF537
+#define CPU "BF537"
+#define CPUID 0x027c8000
+#endif
+#ifdef CONFIG_BF536
+#define CPU "BF536"
+#define CPUID 0x027c8000
+#endif
+#ifdef CONFIG_BF534
+#define CPU "BF534"
+#define CPUID 0x027c6000
+#endif
+#ifndef CPU
+#define CPU "UNKNOWN"
+#define CPUID 0x0
+#endif
+
+#if (CONFIG_MEM_SIZE % 4)
+#error "SDRAM mem size must be multible of 4MB"
+#endif
+
+#define SDRAM_IGENERIC (CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID | CPLB_PORTPRIO)
+#define SDRAM_IKERNEL (SDRAM_IGENERIC | CPLB_LOCK)
+#define L1_IMEMORY ( CPLB_USER_RD | CPLB_VALID | CPLB_LOCK)
+#define SDRAM_INON_CHBL ( CPLB_USER_RD | CPLB_VALID)
+
+/*Use the menuconfig cache policy here - CONFIG_BLKFIN_WT/CONFIG_BLKFIN_WB*/
+
+#define ANOMALY_05000158_WORKAROUND 0x200
+#ifdef CONFIG_BLKFIN_WB /*Write Back Policy */
+#define SDRAM_DGENERIC (CPLB_L1_CHBL | CPLB_DIRTY \
+ | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND)
+#else /*Write Through */
+#define SDRAM_DGENERIC (CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW \
+ | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_DIRTY )
+#endif
+
+
+#define L1_DMEMORY (CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_LOCK | CPLB_DIRTY )
+#define SDRAM_DNON_CHBL (CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_DIRTY )
+#define SDRAM_EBIU (CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_DIRTY )
+#define SDRAM_OOPS (CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_LOCK | CPLB_DIRTY )
+
+#define SIZE_1K 0x00000400 /* 1K */
+#define SIZE_4K 0x00001000 /* 4K */
+#define SIZE_1M 0x00100000 /* 1M */
+#define SIZE_4M 0x00400000 /* 4M */
+
+#define MAX_CPLBS (16 * 2)
+
+/*
+* Number of required data CPLB switchtable entries
+* MEMSIZE / 4 (we mostly install 4M page size CPLBs
+* approx 16 for smaller 1MB page size CPLBs for allignment purposes
+* 1 for L1 Data Memory
+* 1 for CONFIG_DEBUG_HUNT_FOR_ZERO
+* 1 for ASYNC Memory
+*/
+
+
+#define MAX_SWITCH_D_CPLBS (((CONFIG_MEM_SIZE / 4) + 16 + 1 + 1 + 1) * 2)
+
+/*
+* Number of required instruction CPLB switchtable entries
+* MEMSIZE / 4 (we mostly install 4M page size CPLBs
+* approx 12 for smaller 1MB page size CPLBs for allignment purposes
+* 1 for L1 Instruction Memory
+* 1 for CONFIG_DEBUG_HUNT_FOR_ZERO
+*/
+
+#define MAX_SWITCH_I_CPLBS (((CONFIG_MEM_SIZE / 4) + 12 + 1 + 1) * 2)
+
+#endif /* __MACH_BF537_H__ */
diff --git a/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h
new file mode 100644
index 0000000..8f5d9c4
--- /dev/null
+++ b/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h
@@ -0,0 +1,147 @@
+#include <linux/serial.h>
+#include <asm/dma.h>
+
+#define NR_PORTS 2
+
+#define OFFSET_THR 0x00 /* Transmit Holding register */
+#define OFFSET_RBR 0x00 /* Receive Buffer register */
+#define OFFSET_DLL 0x00 /* Divisor Latch (Low-Byte) */
+#define OFFSET_IER 0x04 /* Interrupt Enable Register */
+#define OFFSET_DLH 0x04 /* Divisor Latch (High-Byte) */
+#define OFFSET_IIR 0x08 /* Interrupt Identification Register */
+#define OFFSET_LCR 0x0C /* Line Control Register */
+#define OFFSET_MCR 0x10 /* Modem Control Register */
+#define OFFSET_LSR 0x14 /* Line Status Register */
+#define OFFSET_MSR 0x18 /* Modem Status Register */
+#define OFFSET_SCR 0x1C /* SCR Scratch Register */
+#define OFFSET_GCTL 0x24 /* Global Control Register */
+
+#define UART_GET_CHAR(uart) bfin_read16(((uart)->port.membase + OFFSET_RBR))
+#define UART_GET_DLL(uart) bfin_read16(((uart)->port.membase + OFFSET_DLL))
+#define UART_GET_IER(uart) bfin_read16(((uart)->port.membase + OFFSET_IER))
+#define UART_GET_DLH(uart) bfin_read16(((uart)->port.membase + OFFSET_DLH))
+#define UART_GET_IIR(uart) bfin_read16(((uart)->port.membase + OFFSET_IIR))
+#define UART_GET_LCR(uart) bfin_read16(((uart)->port.membase + OFFSET_LCR))
+#define UART_GET_LSR(uart) bfin_read16(((uart)->port.membase + OFFSET_LSR))
+#define UART_GET_GCTL(uart) bfin_read16(((uart)->port.membase + OFFSET_GCTL))
+
+#define UART_PUT_CHAR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_THR),v)
+#define UART_PUT_DLL(uart,v) bfin_write16(((uart)->port.membase + OFFSET_DLL),v)
+#define UART_PUT_IER(uart,v) bfin_write16(((uart)->port.membase + OFFSET_IER),v)
+#define UART_PUT_DLH(uart,v) bfin_write16(((uart)->port.membase + OFFSET_DLH),v)
+#define UART_PUT_LCR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_LCR),v)
+#define UART_PUT_GCTL(uart,v) bfin_write16(((uart)->port.membase + OFFSET_GCTL),v)
+
+#if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS)
+# define CONFIG_SERIAL_BFIN_CTSRTS
+
+# ifndef CONFIG_UART0_CTS_PIN
+# define CONFIG_UART0_CTS_PIN -1
+# endif
+
+# ifndef CONFIG_UART0_RTS_PIN
+# define CONFIG_UART0_RTS_PIN -1
+# endif
+
+# ifndef CONFIG_UART1_CTS_PIN
+# define CONFIG_UART1_CTS_PIN -1
+# endif
+
+# ifndef CONFIG_UART1_RTS_PIN
+# define CONFIG_UART1_RTS_PIN -1
+# endif
+#endif
+/*
+ * The pin configuration is different from schematic
+ */
+struct bfin_serial_port {
+ struct uart_port port;
+ unsigned int old_status;
+#ifdef CONFIG_SERIAL_BFIN_DMA
+ int tx_done;
+ int tx_count;
+ struct circ_buf rx_dma_buf;
+ struct timer_list rx_dma_timer;
+ int rx_dma_nrows;
+ unsigned int tx_dma_channel;
+ unsigned int rx_dma_channel;
+ struct work_struct tx_dma_workqueue;
+#else
+ struct work_struct cts_workqueue;
+#endif
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
+ int cts_pin;
+ int rts_pin;
+#endif
+};
+
+struct bfin_serial_port bfin_serial_ports[NR_PORTS];
+struct bfin_serial_res {
+ unsigned long uart_base_addr;
+ int uart_irq;
+#ifdef CONFIG_SERIAL_BFIN_DMA
+ unsigned int uart_tx_dma_channel;
+ unsigned int uart_rx_dma_channel;
+#endif
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
+ int uart_cts_pin;
+ int uart_rts_pin;
+#endif
+};
+
+struct bfin_serial_res bfin_serial_resource[] = {
+#ifdef CONFIG_SERIAL_BFIN_UART0
+ {
+ 0xFFC00400,
+ IRQ_UART0_RX,
+#ifdef CONFIG_SERIAL_BFIN_DMA
+ CH_UART0_TX,
+ CH_UART0_RX,
+#endif
+#ifdef CONFIG_BFIN_UART0_CTSRTS
+ CONFIG_UART0_CTS_PIN,
+ CONFIG_UART0_RTS_PIN,
+#endif
+ },
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+ {
+ 0xFFC02000,
+ IRQ_UART1_RX,
+#ifdef CONFIG_SERIAL_BFIN_DMA
+ CH_UART1_TX,
+ CH_UART1_RX,
+#endif
+#ifdef CONFIG_BFIN_UART1_CTSRTS
+ CONFIG_UART1_CTS_PIN,
+ CONFIG_UART1_RTS_PIN,
+#endif
+ },
+#endif
+};
+
+int nr_ports = ARRAY_SIZE(bfin_serial_resource);
+
+static void bfin_serial_hw_init(struct bfin_serial_port *uart)
+{
+ unsigned short val;
+ val = bfin_read16(BFIN_PORT_MUX);
+ val &= ~(PFDE | PFTE);
+ bfin_write16(BFIN_PORT_MUX, val);
+
+ val = bfin_read16(PORTF_FER);
+ val |= 0xF;
+ bfin_write16(PORTF_FER, val);
+
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
+ if (uart->cts_pin >= 0) {
+ gpio_request(uart->cts_pin, NULL);
+ gpio_direction_input(uart->cts_pin);
+ }
+
+ if (uart->rts_pin >= 0) {
+ gpio_request(uart->rts_pin, NULL);
+ gpio_direction_output(uart->rts_pin);
+ }
+#endif
+}
diff --git a/include/asm-blackfin/mach-bf537/blackfin.h b/include/asm-blackfin/mach-bf537/blackfin.h
new file mode 100644
index 0000000..bbd9705
--- /dev/null
+++ b/include/asm-blackfin/mach-bf537/blackfin.h
@@ -0,0 +1,430 @@
+/*
+ * File: include/asm-blackfin/mach-bf537/blackfin.h
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Rev:
+ *
+ * Modified:
+ *
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.
+ * If not, write to the Free Software Foundation,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef _MACH_BLACKFIN_H_
+#define _MACH_BLACKFIN_H_
+
+#define BF537_FAMILY
+
+#include "bf537.h"
+#include "mem_map.h"
+#include "defBF534.h"
+#include "anomaly.h"
+
+#if defined(CONFIG_BF537) || defined(CONFIG_BF536)
+#include "defBF537.h"
+#endif
+
+#if !(defined(__ASSEMBLY__) || defined(ASSEMBLY))
+#include "cdefBF534.h"
+
+/* UART 0*/
+#define bfin_read_UART_THR() bfin_read_UART0_THR()
+#define bfin_write_UART_THR(val) bfin_write_UART0_THR(val)
+#define bfin_read_UART_RBR() bfin_read_UART0_RBR()
+#define bfin_write_UART_RBR(val) bfin_write_UART0_RBR(val)
+#define bfin_read_UART_DLL() bfin_read_UART0_DLL()
+#define bfin_write_UART_DLL(val) bfin_write_UART0_DLL(val)
+#define bfin_read_UART_IER() bfin_read_UART0_IER()
+#define bfin_write_UART_IER(val) bfin_write_UART0_IER(val)
+#define bfin_read_UART_DLH() bfin_read_UART0_DLH()
+#define bfin_write_UART_DLH(val) bfin_write_UART0_DLH(val)
+#define bfin_read_UART_IIR() bfin_read_UART0_IIR()
+#define bfin_write_UART_IIR(val) bfin_write_UART0_IIR(val)
+#define bfin_read_UART_LCR() bfin_read_UART0_LCR()
+#define bfin_write_UART_LCR(val) bfin_write_UART0_LCR(val)
+#define bfin_read_UART_MCR() bfin_read_UART0_MCR()
+#define bfin_write_UART_MCR(val) bfin_write_UART0_MCR(val)
+#define bfin_read_UART_LSR() bfin_read_UART0_LSR()
+#define bfin_write_UART_LSR(val) bfin_write_UART0_LSR(val)
+#define bfin_read_UART_SCR() bfin_read_UART0_SCR()
+#define bfin_write_UART_SCR(val) bfin_write_UART0_SCR(val)
+#define bfin_read_UART_GCTL() bfin_read_UART0_GCTL()
+#define bfin_write_UART_GCTL(val) bfin_write_UART0_GCTL(val)
+
+#if defined(CONFIG_BF537) || defined(CONFIG_BF536)
+#include "cdefBF537.h"
+#endif
+#endif
+
+/* MAP used DEFINES from BF533 to BF537 - so we don't need to change them in the driver, kernel, etc. */
+
+/* UART_IIR Register */
+#define STATUS(x) ((x << 1) & 0x06)
+#define STATUS_P1 0x02
+#define STATUS_P0 0x01
+
+/* UART 0*/
+
+/* DMA Channnel */
+#define bfin_read_CH_UART_RX() bfin_read_CH_UART0_RX()
+#define bfin_write_CH_UART_RX(val) bfin_write_CH_UART0_RX(val)
+#define CH_UART_RX CH_UART0_RX
+#define bfin_read_CH_UART_TX() bfin_read_CH_UART0_TX()
+#define bfin_write_CH_UART_TX(val) bfin_write_CH_UART0_TX(val)
+#define CH_UART_TX CH_UART0_TX
+
+/* System Interrupt Controller */
+#define bfin_read_IRQ_UART_RX() bfin_read_IRQ_UART0_RX()
+#define bfin_write_IRQ_UART_RX(val) bfin_write_IRQ_UART0_RX(val)
+#define IRQ_UART_RX IRQ_UART0_RX
+#define bfin_read_IRQ_UART_TX() bfin_read_IRQ_UART0_TX()
+#define bfin_write_IRQ_UART_TX(val) bfin_write_IRQ_UART0_TX(val)
+#define IRQ_UART_TX IRQ_UART0_TX
+#define bfin_read_IRQ_UART_ERROR() bfin_read_IRQ_UART0_ERROR()
+#define bfin_write_IRQ_UART_ERROR(val) bfin_write_IRQ_UART0_ERROR(val)
+#define IRQ_UART_ERROR IRQ_UART0_ERROR
+
+/* MMR Registers*/
+#define bfin_read_UART_THR() bfin_read_UART0_THR()
+#define bfin_write_UART_THR(val) bfin_write_UART0_THR(val)
+#define UART_THR UART0_THR
+#define bfin_read_UART_RBR() bfin_read_UART0_RBR()
+#define bfin_write_UART_RBR(val) bfin_write_UART0_RBR(val)
+#define UART_RBR UART0_RBR
+#define bfin_read_UART_DLL() bfin_read_UART0_DLL()
+#define bfin_write_UART_DLL(val) bfin_write_UART0_DLL(val)
+#define UART_DLL UART0_DLL
+#define bfin_read_UART_IER() bfin_read_UART0_IER()
+#define bfin_write_UART_IER(val) bfin_write_UART0_IER(val)
+#define UART_IER UART0_IER
+#define bfin_read_UART_DLH() bfin_read_UART0_DLH()
+#define bfin_write_UART_DLH(val) bfin_write_UART0_DLH(val)
+#define UART_DLH UART0_DLH
+#define bfin_read_UART_IIR() bfin_read_UART0_IIR()
+#define bfin_write_UART_IIR(val) bfin_write_UART0_IIR(val)
+#define UART_IIR UART0_IIR
+#define bfin_read_UART_LCR() bfin_read_UART0_LCR()
+#define bfin_write_UART_LCR(val) bfin_write_UART0_LCR(val)
+#define UART_LCR UART0_LCR
+#define bfin_read_UART_MCR() bfin_read_UART0_MCR()
+#define bfin_write_UART_MCR(val) bfin_write_UART0_MCR(val)
+#define UART_MCR UART0_MCR
+#define bfin_read_UART_LSR() bfin_read_UART0_LSR()
+#define bfin_write_UART_LSR(val) bfin_write_UART0_LSR(val)
+#define UART_LSR UART0_LSR
+#define bfin_read_UART_SCR() bfin_read_UART0_SCR()
+#define bfin_write_UART_SCR(val) bfin_write_UART0_SCR(val)
+#define UART_SCR UART0_SCR
+#define bfin_read_UART_GCTL() bfin_read_UART0_GCTL()
+#define bfin_write_UART_GCTL(val) bfin_write_UART0_GCTL(val)
+#define UART_GCTL UART0_GCTL
+
+/* DPMC*/
+#define bfin_read_STOPCK_OFF() bfin_read_STOPCK()
+#define bfin_write_STOPCK_OFF(val) bfin_write_STOPCK(val)
+#define STOPCK_OFF STOPCK
+
+/* FIO USE PORT F*/
+#ifdef CONFIG_BF537_PORT_F
+#define bfin_read_PORT_FER() bfin_read_PORTF_FER()
+#define bfin_write_PORT_FER(val) bfin_write_PORTF_FER(val)
+#define bfin_read_FIO_FLAG_D() bfin_read_PORTFIO()
+#define bfin_write_FIO_FLAG_D(val) bfin_write_PORTFIO(val)
+#define bfin_read_FIO_FLAG_C() bfin_read_PORTFIO_CLEAR()
+#define bfin_write_FIO_FLAG_C(val) bfin_write_PORTFIO_CLEAR(val)
+#define bfin_read_FIO_FLAG_S() bfin_read_PORTFIO_SET()
+#define bfin_write_FIO_FLAG_S(val) bfin_write_PORTFIO_SET(val)
+#define bfin_read_FIO_FLAG_T() bfin_read_PORTFIO_TOGGLE()
+#define bfin_write_FIO_FLAG_T(val) bfin_write_PORTFIO_TOGGLE(val)
+#define bfin_read_FIO_MASKA_D() bfin_read_PORTFIO_MASKA()
+#define bfin_write_FIO_MASKA_D(val) bfin_write_PORTFIO_MASKA(val)
+#define bfin_read_FIO_MASKA_C() bfin_read_PORTFIO_MASKA_CLEAR()
+#define bfin_write_FIO_MASKA_C(val) bfin_write_PORTFIO_MASKA_CLEAR(val)
+#define bfin_read_FIO_MASKA_S() bfin_read_PORTFIO_MASKA_SET()
+#define bfin_write_FIO_MASKA_S(val) bfin_write_PORTFIO_MASKA_SET(val)
+#define bfin_read_FIO_MASKA_T() bfin_read_PORTFIO_MASKA_TOGGLE()
+#define bfin_write_FIO_MASKA_T(val) bfin_write_PORTFIO_MASKA_TOGGLE(val)
+#define bfin_read_FIO_MASKB_D() bfin_read_PORTFIO_MASKB()
+#define bfin_write_FIO_MASKB_D(val) bfin_write_PORTFIO_MASKB(val)
+#define bfin_read_FIO_MASKB_C() bfin_read_PORTFIO_MASKB_CLEAR()
+#define bfin_write_FIO_MASKB_C(val) bfin_write_PORTFIO_MASKB_CLEAR(val)
+#define bfin_read_FIO_MASKB_S() bfin_read_PORTFIO_MASKB_SET()
+#define bfin_write_FIO_MASKB_S(val) bfin_write_PORTFIO_MASKB_SET(val)
+#define bfin_read_FIO_MASKB_T() bfin_read_PORTFIO_MASKB_TOGGLE()
+#define bfin_write_FIO_MASKB_T(val) bfin_write_PORTFIO_MASKB_TOGGLE(val)
+#define bfin_read_FIO_DIR() bfin_read_PORTFIO_DIR()
+#define bfin_write_FIO_DIR(val) bfin_write_PORTFIO_DIR(val)
+#define bfin_read_FIO_POLAR() bfin_read_PORTFIO_POLAR()
+#define bfin_write_FIO_POLAR(val) bfin_write_PORTFIO_POLAR(val)
+#define bfin_read_FIO_EDGE() bfin_read_PORTFIO_EDGE()
+#define bfin_write_FIO_EDGE(val) bfin_write_PORTFIO_EDGE(val)
+#define bfin_read_FIO_BOTH() bfin_read_PORTFIO_BOTH()
+#define bfin_write_FIO_BOTH(val) bfin_write_PORTFIO_BOTH(val)
+#define bfin_read_FIO_INEN() bfin_read_PORTFIO_INEN()
+#define bfin_write_FIO_INEN(val) bfin_write_PORTFIO_INEN(val)
+
+#define bfin_read_FIO_FLAG_D() bfin_read_PORTFIO()
+#define bfin_write_FIO_FLAG_D(val) bfin_write_PORTFIO(val)
+#define FIO_FLAG_D PORTFIO
+#define bfin_read_FIO_FLAG_C() bfin_read_PORTFIO_CLEAR()
+#define bfin_write_FIO_FLAG_C(val) bfin_write_PORTFIO_CLEAR(val)
+#define FIO_FLAG_C PORTFIO_CLEAR
+#define bfin_read_FIO_FLAG_S() bfin_read_PORTFIO_SET()
+#define bfin_write_FIO_FLAG_S(val) bfin_write_PORTFIO_SET(val)
+#define FIO_FLAG_S PORTFIO_SET
+#define bfin_read_FIO_FLAG_T() bfin_read_PORTFIO_TOGGLE()
+#define bfin_write_FIO_FLAG_T(val) bfin_write_PORTFIO_TOGGLE(val)
+#define FIO_FLAG_T PORTFIO_TOGGLE
+#define bfin_read_FIO_MASKA_D() bfin_read_PORTFIO_MASKA()
+#define bfin_write_FIO_MASKA_D(val) bfin_write_PORTFIO_MASKA(val)
+#define FIO_MASKA_D PORTFIO_MASKA
+#define bfin_read_FIO_MASKA_C() bfin_read_PORTFIO_MASKA_CLEAR()
+#define bfin_write_FIO_MASKA_C(val) bfin_write_PORTFIO_MASKA_CLEAR(val)
+#define FIO_MASKA_C PORTFIO_MASKA_CLEAR
+#define bfin_read_FIO_MASKA_S() bfin_read_PORTFIO_MASKA_SET()
+#define bfin_write_FIO_MASKA_S(val) bfin_write_PORTFIO_MASKA_SET(val)
+#define FIO_MASKA_S PORTFIO_MASKA_SET
+#define bfin_read_FIO_MASKA_T() bfin_read_PORTFIO_MASKA_TOGGLE()
+#define bfin_write_FIO_MASKA_T(val) bfin_write_PORTFIO_MASKA_TOGGLE(val)
+#define FIO_MASKA_T PORTFIO_MASKA_TOGGLE
+#define bfin_read_FIO_MASKB_D() bfin_read_PORTFIO_MASKB()
+#define bfin_write_FIO_MASKB_D(val) bfin_write_PORTFIO_MASKB(val)
+#define FIO_MASKB_D PORTFIO_MASKB
+#define bfin_read_FIO_MASKB_C() bfin_read_PORTFIO_MASKB_CLEAR()
+#define bfin_write_FIO_MASKB_C(val) bfin_write_PORTFIO_MASKB_CLEAR(val)
+#define FIO_MASKB_C PORTFIO_MASKB_CLEAR
+#define bfin_read_FIO_MASKB_S() bfin_read_PORTFIO_MASKB_SET()
+#define bfin_write_FIO_MASKB_S(val) bfin_write_PORTFIO_MASKB_SET(val)
+#define FIO_MASKB_S PORTFIO_MASKB_SET
+#define bfin_read_FIO_MASKB_T() bfin_read_PORTFIO_MASKB_TOGGLE()
+#define bfin_write_FIO_MASKB_T(val) bfin_write_PORTFIO_MASKB_TOGGLE(val)
+#define FIO_MASKB_T PORTFIO_MASKB_TOGGLE
+#define bfin_read_FIO_DIR() bfin_read_PORTFIO_DIR()
+#define bfin_write_FIO_DIR(val) bfin_write_PORTFIO_DIR(val)
+#define FIO_DIR PORTFIO_DIR
+#define bfin_read_FIO_POLAR() bfin_read_PORTFIO_POLAR()
+#define bfin_write_FIO_POLAR(val) bfin_write_PORTFIO_POLAR(val)
+#define FIO_POLAR PORTFIO_POLAR
+#define bfin_read_FIO_EDGE() bfin_read_PORTFIO_EDGE()
+#define bfin_write_FIO_EDGE(val) bfin_write_PORTFIO_EDGE(val)
+#define FIO_EDGE PORTFIO_EDGE
+#define bfin_read_FIO_BOTH() bfin_read_PORTFIO_BOTH()
+#define bfin_write_FIO_BOTH(val) bfin_write_PORTFIO_BOTH(val)
+#define FIO_BOTH PORTFIO_BOTH
+#define bfin_read_FIO_INEN() bfin_read_PORTFIO_INEN()
+#define bfin_write_FIO_INEN(val) bfin_write_PORTFIO_INEN(val)
+#define FIO_INEN PORTFIO_INEN
+#endif
+
+/* FIO USE PORT G*/
+#ifdef CONFIG_BF537_PORT_G
+#define bfin_read_PORT_FER() bfin_read_PORTG_FER()
+#define bfin_write_PORT_FER(val) bfin_write_PORTG_FER(val)
+#define bfin_read_FIO_FLAG_D() bfin_read_PORTGIO()
+#define bfin_write_FIO_FLAG_D(val) bfin_write_PORTGIO(val)
+#define bfin_read_FIO_FLAG_C() bfin_read_PORTGIO_CLEAR()
+#define bfin_write_FIO_FLAG_C(val) bfin_write_PORTGIO_CLEAR(val)
+#define bfin_read_FIO_FLAG_S() bfin_read_PORTGIO_SET()
+#define bfin_write_FIO_FLAG_S(val) bfin_write_PORTGIO_SET(val)
+#define bfin_read_FIO_FLAG_T() bfin_read_PORTGIO_TOGGLE()
+#define bfin_write_FIO_FLAG_T(val) bfin_write_PORTGIO_TOGGLE(val)
+#define bfin_read_FIO_MASKA_D() bfin_read_PORTGIO_MASKA()
+#define bfin_write_FIO_MASKA_D(val) bfin_write_PORTGIO_MASKA(val)
+#define bfin_read_FIO_MASKA_C() bfin_read_PORTGIO_MASKA_CLEAR()
+#define bfin_write_FIO_MASKA_C(val) bfin_write_PORTGIO_MASKA_CLEAR(val)
+#define bfin_read_FIO_MASKA_S() bfin_read_PORTGIO_MASKA_SET()
+#define bfin_write_FIO_MASKA_S(val) bfin_write_PORTGIO_MASKA_SET(val)
+#define bfin_read_FIO_MASKA_T() bfin_read_PORTGIO_MASKA_TOGGLE()
+#define bfin_write_FIO_MASKA_T(val) bfin_write_PORTGIO_MASKA_TOGGLE(val)
+#define bfin_read_FIO_MASKB_D() bfin_read_PORTGIO_MASKB()
+#define bfin_write_FIO_MASKB_D(val) bfin_write_PORTGIO_MASKB(val)
+#define bfin_read_FIO_MASKB_C() bfin_read_PORTGIO_MASKB_CLEAR()
+#define bfin_write_FIO_MASKB_C(val) bfin_write_PORTGIO_MASKB_CLEAR(val)
+#define bfin_read_FIO_MASKB_S() bfin_read_PORTGIO_MASKB_SET()
+#define bfin_write_FIO_MASKB_S(val) bfin_write_PORTGIO_MASKB_SET(val)
+#define bfin_read_FIO_MASKB_T() bfin_read_PORTGIO_MASKB_TOGGLE()
+#define bfin_write_FIO_MASKB_T(val) bfin_write_PORTGIO_MASKB_TOGGLE(val)
+#define bfin_read_FIO_DIR() bfin_read_PORTGIO_DIR()
+#define bfin_write_FIO_DIR(val) bfin_write_PORTGIO_DIR(val)
+#define bfin_read_FIO_POLAR() bfin_read_PORTGIO_POLAR()
+#define bfin_write_FIO_POLAR(val) bfin_write_PORTGIO_POLAR(val)
+#define bfin_read_FIO_EDGE() bfin_read_PORTGIO_EDGE()
+#define bfin_write_FIO_EDGE(val) bfin_write_PORTGIO_EDGE(val)
+#define bfin_read_FIO_BOTH() bfin_read_PORTGIO_BOTH()
+#define bfin_write_FIO_BOTH(val) bfin_write_PORTGIO_BOTH(val)
+#define bfin_read_FIO_INEN() bfin_read_PORTGIO_INEN()
+#define bfin_write_FIO_INEN(val) bfin_write_PORTGIO_INEN(val)
+
+#define bfin_read_FIO_FLAG_D() bfin_read_PORTGIO()
+#define bfin_write_FIO_FLAG_D(val) bfin_write_PORTGIO(val)
+#define FIO_FLAG_D PORTGIO
+#define bfin_read_FIO_FLAG_C() bfin_read_PORTGIO_CLEAR()
+#define bfin_write_FIO_FLAG_C(val) bfin_write_PORTGIO_CLEAR(val)
+#define FIO_FLAG_C PORTGIO_CLEAR
+#define bfin_read_FIO_FLAG_S() bfin_read_PORTGIO_SET()
+#define bfin_write_FIO_FLAG_S(val) bfin_write_PORTGIO_SET(val)
+#define FIO_FLAG_S PORTGIO_SET
+#define bfin_read_FIO_FLAG_T() bfin_read_PORTGIO_TOGGLE()
+#define bfin_write_FIO_FLAG_T(val) bfin_write_PORTGIO_TOGGLE(val)
+#define FIO_FLAG_T PORTGIO_TOGGLE
+#define bfin_read_FIO_MASKA_D() bfin_read_PORTGIO_MASKA()
+#define bfin_write_FIO_MASKA_D(val) bfin_write_PORTGIO_MASKA(val)
+#define FIO_MASKA_D PORTGIO_MASKA
+#define bfin_read_FIO_MASKA_C() bfin_read_PORTGIO_MASKA_CLEAR()
+#define bfin_write_FIO_MASKA_C(val) bfin_write_PORTGIO_MASKA_CLEAR(val)
+#define FIO_MASKA_C PORTGIO_MASKA_CLEAR
+#define bfin_read_FIO_MASKA_S() bfin_read_PORTGIO_MASKA_SET()
+#define bfin_write_FIO_MASKA_S(val) bfin_write_PORTGIO_MASKA_SET(val)
+#define FIO_MASKA_S PORTGIO_MASKA_SET
+#define bfin_read_FIO_MASKA_T() bfin_read_PORTGIO_MASKA_TOGGLE()
+#define bfin_write_FIO_MASKA_T(val) bfin_write_PORTGIO_MASKA_TOGGLE(val)
+#define FIO_MASKA_T PORTGIO_MASKA_TOGGLE
+#define bfin_read_FIO_MASKB_D() bfin_read_PORTGIO_MASKB()
+#define bfin_write_FIO_MASKB_D(val) bfin_write_PORTGIO_MASKB(val)
+#define FIO_MASKB_D PORTGIO_MASKB
+#define bfin_read_FIO_MASKB_C() bfin_read_PORTGIO_MASKB_CLEAR()
+#define bfin_write_FIO_MASKB_C(val) bfin_write_PORTGIO_MASKB_CLEAR(val)
+#define FIO_MASKB_C PORTGIO_MASKB_CLEAR
+#define bfin_read_FIO_MASKB_S() bfin_read_PORTGIO_MASKB_SET()
+#define bfin_write_FIO_MASKB_S(val) bfin_write_PORTGIO_MASKB_SET(val)
+#define FIO_MASKB_S PORTGIO_MASKB_SET
+#define bfin_read_FIO_MASKB_T() bfin_read_PORTGIO_MASKB_TOGGLE()
+#define bfin_write_FIO_MASKB_T(val) bfin_write_PORTGIO_MASKB_TOGGLE(val)
+#define FIO_MASKB_T PORTGIO_MASKB_TOGGLE
+#define bfin_read_FIO_DIR() bfin_read_PORTGIO_DIR()
+#define bfin_write_FIO_DIR(val) bfin_write_PORTGIO_DIR(val)
+#define FIO_DIR PORTGIO_DIR
+#define bfin_read_FIO_POLAR() bfin_read_PORTGIO_POLAR()
+#define bfin_write_FIO_POLAR(val) bfin_write_PORTGIO_POLAR(val)
+#define FIO_POLAR PORTGIO_POLAR
+#define bfin_read_FIO_EDGE() bfin_read_PORTGIO_EDGE()
+#define bfin_write_FIO_EDGE(val) bfin_write_PORTGIO_EDGE(val)
+#define FIO_EDGE PORTGIO_EDGE
+#define bfin_read_FIO_BOTH() bfin_read_PORTGIO_BOTH()
+#define bfin_write_FIO_BOTH(val) bfin_write_PORTGIO_BOTH(val)
+#define FIO_BOTH PORTGIO_BOTH
+#define bfin_read_FIO_INEN() bfin_read_PORTGIO_INEN()
+#define bfin_write_FIO_INEN(val) bfin_write_PORTGIO_INEN(val)
+#define FIO_INEN PORTGIO_INEN
+
+#endif
+
+/* FIO USE PORT H*/
+#ifdef CONFIG_BF537_PORT_H
+#define bfin_read_PORT_FER() bfin_read_PORTH_FER()
+#define bfin_write_PORT_FER(val) bfin_write_PORTH_FER(val)
+#define bfin_read_FIO_FLAG_D() bfin_read_PORTHIO()
+#define bfin_write_FIO_FLAG_D(val) bfin_write_PORTHIO(val)
+#define bfin_read_FIO_FLAG_C() bfin_read_PORTHIO_CLEAR()
+#define bfin_write_FIO_FLAG_C(val) bfin_write_PORTHIO_CLEAR(val)
+#define bfin_read_FIO_FLAG_S() bfin_read_PORTHIO_SET()
+#define bfin_write_FIO_FLAG_S(val) bfin_write_PORTHIO_SET(val)
+#define bfin_read_FIO_FLAG_T() bfin_read_PORTHIO_TOGGLE()
+#define bfin_write_FIO_FLAG_T(val) bfin_write_PORTHIO_TOGGLE(val)
+#define bfin_read_FIO_MASKA_D() bfin_read_PORTHIO_MASKA()
+#define bfin_write_FIO_MASKA_D(val) bfin_write_PORTHIO_MASKA(val)
+#define bfin_read_FIO_MASKA_C() bfin_read_PORTHIO_MASKA_CLEAR()
+#define bfin_write_FIO_MASKA_C(val) bfin_write_PORTHIO_MASKA_CLEAR(val)
+#define bfin_read_FIO_MASKA_S() bfin_read_PORTHIO_MASKA_SET()
+#define bfin_write_FIO_MASKA_S(val) bfin_write_PORTHIO_MASKA_SET(val)
+#define bfin_read_FIO_MASKA_T() bfin_read_PORTHIO_MASKA_TOGGLE()
+#define bfin_write_FIO_MASKA_T(val) bfin_write_PORTHIO_MASKA_TOGGLE(val)
+#define bfin_read_FIO_MASKB_D() bfin_read_PORTHIO_MASKB()
+#define bfin_write_FIO_MASKB_D(val) bfin_write_PORTHIO_MASKB(val)
+#define bfin_read_FIO_MASKB_C() bfin_read_PORTHIO_MASKB_CLEAR()
+#define bfin_write_FIO_MASKB_C(val) bfin_write_PORTHIO_MASKB_CLEAR(val)
+#define bfin_read_FIO_MASKB_S() bfin_read_PORTHIO_MASKB_SET()
+#define bfin_write_FIO_MASKB_S(val) bfin_write_PORTHIO_MASKB_SET(val)
+#define bfin_read_FIO_MASKB_T() bfin_read_PORTHIO_MASKB_TOGGLE()
+#define bfin_write_FIO_MASKB_T(val) bfin_write_PORTHIO_MASKB_TOGGLE(val)
+#define bfin_read_FIO_DIR() bfin_read_PORTHIO_DIR()
+#define bfin_write_FIO_DIR(val) bfin_write_PORTHIO_DIR(val)
+#define bfin_read_FIO_POLAR() bfin_read_PORTHIO_POLAR()
+#define bfin_write_FIO_POLAR(val) bfin_write_PORTHIO_POLAR(val)
+#define bfin_read_FIO_EDGE() bfin_read_PORTHIO_EDGE()
+#define bfin_write_FIO_EDGE(val) bfin_write_PORTHIO_EDGE(val)
+#define bfin_read_FIO_BOTH() bfin_read_PORTHIO_BOTH()
+#define bfin_write_FIO_BOTH(val) bfin_write_PORTHIO_BOTH(val)
+#define bfin_read_FIO_INEN() bfin_read_PORTHIO_INEN()
+#define bfin_write_FIO_INEN(val) bfin_write_PORTHIO_INEN(val)
+
+#define bfin_read_FIO_FLAG_D() bfin_read_PORTHIO()
+#define bfin_write_FIO_FLAG_D(val) bfin_write_PORTHIO(val)
+#define FIO_FLAG_D PORTHIO
+#define bfin_read_FIO_FLAG_C() bfin_read_PORTHIO_CLEAR()
+#define bfin_write_FIO_FLAG_C(val) bfin_write_PORTHIO_CLEAR(val)
+#define FIO_FLAG_C PORTHIO_CLEAR
+#define bfin_read_FIO_FLAG_S() bfin_read_PORTHIO_SET()
+#define bfin_write_FIO_FLAG_S(val) bfin_write_PORTHIO_SET(val)
+#define FIO_FLAG_S PORTHIO_SET
+#define bfin_read_FIO_FLAG_T() bfin_read_PORTHIO_TOGGLE()
+#define bfin_write_FIO_FLAG_T(val) bfin_write_PORTHIO_TOGGLE(val)
+#define FIO_FLAG_T PORTHIO_TOGGLE
+#define bfin_read_FIO_MASKA_D() bfin_read_PORTHIO_MASKA()
+#define bfin_write_FIO_MASKA_D(val) bfin_write_PORTHIO_MASKA(val)
+#define FIO_MASKA_D PORTHIO_MASKA
+#define bfin_read_FIO_MASKA_C() bfin_read_PORTHIO_MASKA_CLEAR()
+#define bfin_write_FIO_MASKA_C(val) bfin_write_PORTHIO_MASKA_CLEAR(val)
+#define FIO_MASKA_C PORTHIO_MASKA_CLEAR
+#define bfin_read_FIO_MASKA_S() bfin_read_PORTHIO_MASKA_SET()
+#define bfin_write_FIO_MASKA_S(val) bfin_write_PORTHIO_MASKA_SET(val)
+#define FIO_MASKA_S PORTHIO_MASKA_SET
+#define bfin_read_FIO_MASKA_T() bfin_read_PORTHIO_MASKA_TOGGLE()
+#define bfin_write_FIO_MASKA_T(val) bfin_write_PORTHIO_MASKA_TOGGLE(val)
+#define FIO_MASKA_T PORTHIO_MASKA_TOGGLE
+#define bfin_read_FIO_MASKB_D() bfin_read_PORTHIO_MASKB()
+#define bfin_write_FIO_MASKB_D(val) bfin_write_PORTHIO_MASKB(val)
+#define FIO_MASKB_D PORTHIO_MASKB
+#define bfin_read_FIO_MASKB_C() bfin_read_PORTHIO_MASKB_CLEAR()
+#define bfin_write_FIO_MASKB_C(val) bfin_write_PORTHIO_MASKB_CLEAR(val)
+#define FIO_MASKB_C PORTHIO_MASKB_CLEAR
+#define bfin_read_FIO_MASKB_S() bfin_read_PORTHIO_MASKB_SET()
+#define bfin_write_FIO_MASKB_S(val) bfin_write_PORTHIO_MASKB_SET(val)
+#define FIO_MASKB_S PORTHIO_MASKB_SET
+#define bfin_read_FIO_MASKB_T() bfin_read_PORTHIO_MASKB_TOGGLE()
+#define bfin_write_FIO_MASKB_T(val) bfin_write_PORTHIO_MASKB_TOGGLE(val)
+#define FIO_MASKB_T PORTHIO_MASKB_TOGGLE
+#define bfin_read_FIO_DIR() bfin_read_PORTHIO_DIR()
+#define bfin_write_FIO_DIR(val) bfin_write_PORTHIO_DIR(val)
+#define FIO_DIR PORTHIO_DIR
+#define bfin_read_FIO_POLAR() bfin_read_PORTHIO_POLAR()
+#define bfin_write_FIO_POLAR(val) bfin_write_PORTHIO_POLAR(val)
+#define FIO_POLAR PORTHIO_POLAR
+#define bfin_read_FIO_EDGE() bfin_read_PORTHIO_EDGE()
+#define bfin_write_FIO_EDGE(val) bfin_write_PORTHIO_EDGE(val)
+#define FIO_EDGE PORTHIO_EDGE
+#define bfin_read_FIO_BOTH() bfin_read_PORTHIO_BOTH()
+#define bfin_write_FIO_BOTH(val) bfin_write_PORTHIO_BOTH(val)
+#define FIO_BOTH PORTHIO_BOTH
+#define bfin_read_FIO_INEN() bfin_read_PORTHIO_INEN()
+#define bfin_write_FIO_INEN(val) bfin_write_PORTHIO_INEN(val)
+#define FIO_INEN PORTHIO_INEN
+
+#endif
+
+/* PLL_DIV Masks */
+#define CCLK_DIV1 CSEL_DIV1 /* CCLK = VCO / 1 */
+#define CCLK_DIV2 CSEL_DIV2 /* CCLK = VCO / 2 */
+#define CCLK_DIV4 CSEL_DIV4 /* CCLK = VCO / 4 */
+#define CCLK_DIV8 CSEL_DIV8 /* CCLK = VCO / 8 */
+
+#endif
diff --git a/include/asm-blackfin/mach-bf537/cdefBF534.h b/include/asm-blackfin/mach-bf537/cdefBF534.h
new file mode 100644
index 0000000..7b658c1
--- /dev/null
+++ b/include/asm-blackfin/mach-bf537/cdefBF534.h
@@ -0,0 +1,1823 @@
+/*
+ * File: include/asm-blackfin/mach-bf537/cdefbf534.h
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description: system mmr register map
+ *
+ * Rev:
+ *
+ * Modified:
+ *
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.
+ * If not, write to the Free Software Foundation,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef _CDEF_BF534_H
+#define _CDEF_BF534_H
+
+/* Include all Core registers and bit definitions */
+#include "defBF534.h"
+
+/* Include core specific register pointer definitions */
+#include <asm/mach-common/cdef_LPBlackfin.h>
+
+#include <asm/system.h>
+
+/* Clock and System Control (0xFFC00000 - 0xFFC000FF) */
+#define bfin_read_PLL_CTL() bfin_read16(PLL_CTL)
+#define bfin_write_PLL_CTL(val) bfin_write16(PLL_CTL,val)
+#define bfin_read_PLL_DIV() bfin_read16(PLL_DIV)
+#define bfin_write_PLL_DIV(val) bfin_write16(PLL_DIV,val)
+#define bfin_read_VR_CTL() bfin_read16(VR_CTL)
+/* Writing to VR_CTL initiates a PLL relock sequence. */
+static __inline__ void bfin_write_VR_CTL(unsigned int val)
+{
+ unsigned long flags, iwr;
+
+ bfin_write16(VR_CTL, val);
+ __builtin_bfin_ssync();
+ /* Enable the PLL Wakeup bit in SIC IWR */
+ iwr = bfin_read32(SIC_IWR);
+ /* Only allow PPL Wakeup) */
+ bfin_write32(SIC_IWR, IWR_ENABLE(0));
+ local_irq_save(flags);
+ asm("IDLE;");
+ local_irq_restore(flags);
+ bfin_write32(SIC_IWR, iwr);
+}
+#define bfin_read_PLL_STAT() bfin_read16(PLL_STAT)
+#define bfin_write_PLL_STAT(val) bfin_write16(PLL_STAT,val)
+#define bfin_read_PLL_LOCKCNT() bfin_read16(PLL_LOCKCNT)
+#define bfin_write_PLL_LOCKCNT(val) bfin_write16(PLL_LOCKCNT,val)
+#define bfin_read_CHIPID() bfin_read32(CHIPID)
+
+/* System Interrupt Controller (0xFFC00100 - 0xFFC001FF) */
+#define bfin_read_SWRST() bfin_read16(SWRST)
+#define bfin_write_SWRST(val) bfin_write16(SWRST,val)
+#define bfin_read_SYSCR() bfin_read16(SYSCR)
+#define bfin_write_SYSCR(val) bfin_write16(SYSCR,val)
+#define pSIC_RVECT ((void * volatile *)SIC_RVECT)
+#define bfin_read_SIC_RVECT() bfin_read32(SIC_RVECT)
+#define bfin_write_SIC_RVECT(val) bfin_write32(SIC_RVECT,val)
+#define bfin_read_SIC_IMASK() bfin_read32(SIC_IMASK)
+#define bfin_write_SIC_IMASK(val) bfin_write32(SIC_IMASK,val)
+#define bfin_read_SIC_IAR0() bfin_read32(SIC_IAR0)
+#define bfin_write_SIC_IAR0(val) bfin_write32(SIC_IAR0,val)
+#define bfin_read_SIC_IAR1() bfin_read32(SIC_IAR1)
+#define bfin_write_SIC_IAR1(val) bfin_write32(SIC_IAR1,val)
+#define bfin_read_SIC_IAR2() bfin_read32(SIC_IAR2)
+#define bfin_write_SIC_IAR2(val) bfin_write32(SIC_IAR2,val)
+#define bfin_read_SIC_IAR3() bfin_read32(SIC_IAR3)
+#define bfin_write_SIC_IAR3(val) bfin_write32(SIC_IAR3,val)
+#define bfin_read_SIC_ISR() bfin_read32(SIC_ISR)
+#define bfin_write_SIC_ISR(val) bfin_write32(SIC_ISR,val)
+#define bfin_read_SIC_IWR() bfin_read32(SIC_IWR)
+#define bfin_write_SIC_IWR(val) bfin_write32(SIC_IWR,val)
+
+/* Watchdog Timer (0xFFC00200 - 0xFFC002FF) */
+#define bfin_read_WDOG_CTL() bfin_read16(WDOG_CTL)
+#define bfin_write_WDOG_CTL(val) bfin_write16(WDOG_CTL,val)
+#define bfin_read_WDOG_CNT() bfin_read32(WDOG_CNT)
+#define bfin_write_WDOG_CNT(val) bfin_write32(WDOG_CNT,val)
+#define bfin_read_WDOG_STAT() bfin_read32(WDOG_STAT)
+#define bfin_write_WDOG_STAT(val) bfin_write32(WDOG_STAT,val)
+
+/* Real Time Clock (0xFFC00300 - 0xFFC003FF) */
+#define bfin_read_RTC_STAT() bfin_read32(RTC_STAT)
+#define bfin_write_RTC_STAT(val) bfin_write32(RTC_STAT,val)
+#define bfin_read_RTC_ICTL() bfin_read16(RTC_ICTL)
+#define bfin_write_RTC_ICTL(val) bfin_write16(RTC_ICTL,val)
+#define bfin_read_RTC_ISTAT() bfin_read16(RTC_ISTAT)
+#define bfin_write_RTC_ISTAT(val) bfin_write16(RTC_ISTAT,val)
+#define bfin_read_RTC_SWCNT() bfin_read16(RTC_SWCNT)
+#define bfin_write_RTC_SWCNT(val) bfin_write16(RTC_SWCNT,val)
+#define bfin_read_RTC_ALARM() bfin_read32(RTC_ALARM)
+#define bfin_write_RTC_ALARM(val) bfin_write32(RTC_ALARM,val)
+#define bfin_read_RTC_FAST() bfin_read16(RTC_FAST)
+#define bfin_write_RTC_FAST(val) bfin_write16(RTC_FAST,val)
+#define bfin_read_RTC_PREN() bfin_read16(RTC_PREN)
+#define bfin_write_RTC_PREN(val) bfin_write16(RTC_PREN,val)
+
+/* UART0 Controller (0xFFC00400 - 0xFFC004FF) */
+#define bfin_read_UART0_THR() bfin_read16(UART0_THR)
+#define bfin_write_UART0_THR(val) bfin_write16(UART0_THR,val)
+#define bfin_read_UART0_RBR() bfin_read16(UART0_RBR)
+#define bfin_write_UART0_RBR(val) bfin_write16(UART0_RBR,val)
+#define bfin_read_UART0_DLL() bfin_read16(UART0_DLL)
+#define bfin_write_UART0_DLL(val) bfin_write16(UART0_DLL,val)
+#define bfin_read_UART0_IER() bfin_read16(UART0_IER)
+#define bfin_write_UART0_IER(val) bfin_write16(UART0_IER,val)
+#define bfin_read_UART0_DLH() bfin_read16(UART0_DLH)
+#define bfin_write_UART0_DLH(val) bfin_write16(UART0_DLH,val)
+#define bfin_read_UART0_IIR() bfin_read16(UART0_IIR)
+#define bfin_write_UART0_IIR(val) bfin_write16(UART0_IIR,val)
+#define bfin_read_UART0_LCR() bfin_read16(UART0_LCR)
+#define bfin_write_UART0_LCR(val) bfin_write16(UART0_LCR,val)
+#define bfin_read_UART0_MCR() bfin_read16(UART0_MCR)
+#define bfin_write_UART0_MCR(val) bfin_write16(UART0_MCR,val)
+#define bfin_read_UART0_LSR() bfin_read16(UART0_LSR)
+#define bfin_write_UART0_LSR(val) bfin_write16(UART0_LSR,val)
+#define bfin_read_UART0_MSR() bfin_read16(UART0_MSR)
+#define bfin_write_UART0_MSR(val) bfin_write16(UART0_MSR,val)
+#define bfin_read_UART0_SCR() bfin_read16(UART0_SCR)
+#define bfin_write_UART0_SCR(val) bfin_write16(UART0_SCR,val)
+#define bfin_read_UART0_GCTL() bfin_read16(UART0_GCTL)
+#define bfin_write_UART0_GCTL(val) bfin_write16(UART0_GCTL,val)
+
+/* SPI Controller (0xFFC00500 - 0xFFC005FF) */
+#define bfin_read_SPI_CTL() bfin_read16(SPI_CTL)
+#define bfin_write_SPI_CTL(val) bfin_write16(SPI_CTL,val)
+#define bfin_read_SPI_FLG() bfin_read16(SPI_FLG)
+#define bfin_write_SPI_FLG(val) bfin_write16(SPI_FLG,val)
+#define bfin_read_SPI_STAT() bfin_read16(SPI_STAT)
+#define bfin_write_SPI_STAT(val) bfin_write16(SPI_STAT,val)
+#define bfin_read_SPI_TDBR() bfin_read16(SPI_TDBR)
+#define bfin_write_SPI_TDBR(val) bfin_write16(SPI_TDBR,val)
+#define bfin_read_SPI_RDBR() bfin_read16(SPI_RDBR)
+#define bfin_write_SPI_RDBR(val) bfin_write16(SPI_RDBR,val)
+#define bfin_read_SPI_BAUD() bfin_read16(SPI_BAUD)
+#define bfin_write_SPI_BAUD(val) bfin_write16(SPI_BAUD,val)
+#define bfin_read_SPI_SHADOW() bfin_read16(SPI_SHADOW)
+#define bfin_write_SPI_SHADOW(val) bfin_write16(SPI_SHADOW,val)
+
+/* TIMER0-7 Registers (0xFFC00600 - 0xFFC006FF) */
+#define bfin_read_TIMER0_CONFIG() bfin_read16(TIMER0_CONFIG)
+#define bfin_write_TIMER0_CONFIG(val) bfin_write16(TIMER0_CONFIG,val)
+#define bfin_read_TIMER0_COUNTER() bfin_read32(TIMER0_COUNTER)
+#define bfin_write_TIMER0_COUNTER(val) bfin_write32(TIMER0_COUNTER,val)
+#define bfin_read_TIMER0_PERIOD() bfin_read32(TIMER0_PERIOD)
+#define bfin_write_TIMER0_PERIOD(val) bfin_write32(TIMER0_PERIOD,val)
+#define bfin_read_TIMER0_WIDTH() bfin_read32(TIMER0_WIDTH)
+#define bfin_write_TIMER0_WIDTH(val) bfin_write32(TIMER0_WIDTH,val)
+
+#define bfin_read_TIMER1_CONFIG() bfin_read16(TIMER1_CONFIG)
+#define bfin_write_TIMER1_CONFIG(val) bfin_write16(TIMER1_CONFIG,val)
+#define bfin_read_TIMER1_COUNTER() bfin_read32(TIMER1_COUNTER)
+#define bfin_write_TIMER1_COUNTER(val) bfin_write32(TIMER1_COUNTER,val)
+#define bfin_read_TIMER1_PERIOD() bfin_read32(TIMER1_PERIOD)
+#define bfin_write_TIMER1_PERIOD(val) bfin_write32(TIMER1_PERIOD,val)
+#define bfin_read_TIMER1_WIDTH() bfin_read32(TIMER1_WIDTH)
+#define bfin_write_TIMER1_WIDTH(val) bfin_write32(TIMER1_WIDTH,val)
+
+#define bfin_read_TIMER2_CONFIG() bfin_read16(TIMER2_CONFIG)
+#define bfin_write_TIMER2_CONFIG(val) bfin_write16(TIMER2_CONFIG,val)
+#define bfin_read_TIMER2_COUNTER() bfin_read32(TIMER2_COUNTER)
+#define bfin_write_TIMER2_COUNTER(val) bfin_write32(TIMER2_COUNTER,val)
+#define bfin_read_TIMER2_PERIOD() bfin_read32(TIMER2_PERIOD)
+#define bfin_write_TIMER2_PERIOD(val) bfin_write32(TIMER2_PERIOD,val)
+#define bfin_read_TIMER2_WIDTH() bfin_read32(TIMER2_WIDTH)
+#define bfin_write_TIMER2_WIDTH(val) bfin_write32(TIMER2_WIDTH,val)
+
+#define bfin_read_TIMER3_CONFIG() bfin_read16(TIMER3_CONFIG)
+#define bfin_write_TIMER3_CONFIG(val) bfin_write16(TIMER3_CONFIG,val)
+#define bfin_read_TIMER3_COUNTER() bfin_read32(TIMER3_COUNTER)
+#define bfin_write_TIMER3_COUNTER(val) bfin_write32(TIMER3_COUNTER,val)
+#define bfin_read_TIMER3_PERIOD() bfin_read32(TIMER3_PERIOD)
+#define bfin_write_TIMER3_PERIOD(val) bfin_write32(TIMER3_PERIOD,val)
+#define bfin_read_TIMER3_WIDTH() bfin_read32(TIMER3_WIDTH)
+#define bfin_write_TIMER3_WIDTH(val) bfin_write32(TIMER3_WIDTH,val)
+
+#define bfin_read_TIMER4_CONFIG() bfin_read16(TIMER4_CONFIG)
+#define bfin_write_TIMER4_CONFIG(val) bfin_write16(TIMER4_CONFIG,val)
+#define bfin_read_TIMER4_COUNTER() bfin_read32(TIMER4_COUNTER)
+#define bfin_write_TIMER4_COUNTER(val) bfin_write32(TIMER4_COUNTER,val)
+#define bfin_read_TIMER4_PERIOD() bfin_read32(TIMER4_PERIOD)
+#define bfin_write_TIMER4_PERIOD(val) bfin_write32(TIMER4_PERIOD,val)
+#define bfin_read_TIMER4_WIDTH() bfin_read32(TIMER4_WIDTH)
+#define bfin_write_TIMER4_WIDTH(val) bfin_write32(TIMER4_WIDTH,val)
+
+#define bfin_read_TIMER5_CONFIG() bfin_read16(TIMER5_CONFIG)
+#define bfin_write_TIMER5_CONFIG(val) bfin_write16(TIMER5_CONFIG,val)
+#define bfin_read_TIMER5_COUNTER() bfin_read32(TIMER5_COUNTER)
+#define bfin_write_TIMER5_COUNTER(val) bfin_write32(TIMER5_COUNTER,val)
+#define bfin_read_TIMER5_PERIOD() bfin_read32(TIMER5_PERIOD)
+#define bfin_write_TIMER5_PERIOD(val) bfin_write32(TIMER5_PERIOD,val)
+#define bfin_read_TIMER5_WIDTH() bfin_read32(TIMER5_WIDTH)
+#define bfin_write_TIMER5_WIDTH(val) bfin_write32(TIMER5_WIDTH,val)
+
+#define bfin_read_TIMER6_CONFIG() bfin_read16(TIMER6_CONFIG)
+#define bfin_write_TIMER6_CONFIG(val) bfin_write16(TIMER6_CONFIG,val)
+#define bfin_read_TIMER6_COUNTER() bfin_read32(TIMER6_COUNTER)
+#define bfin_write_TIMER6_COUNTER(val) bfin_write32(TIMER6_COUNTER,val)
+#define bfin_read_TIMER6_PERIOD() bfin_read32(TIMER6_PERIOD)
+#define bfin_write_TIMER6_PERIOD(val) bfin_write32(TIMER6_PERIOD,val)
+#define bfin_read_TIMER6_WIDTH() bfin_read32(TIMER6_WIDTH)
+#define bfin_write_TIMER6_WIDTH(val) bfin_write32(TIMER6_WIDTH,val)
+
+#define bfin_read_TIMER7_CONFIG() bfin_read16(TIMER7_CONFIG)
+#define bfin_write_TIMER7_CONFIG(val) bfin_write16(TIMER7_CONFIG,val)
+#define bfin_read_TIMER7_COUNTER() bfin_read32(TIMER7_COUNTER)
+#define bfin_write_TIMER7_COUNTER(val) bfin_write32(TIMER7_COUNTER,val)
+#define bfin_read_TIMER7_PERIOD() bfin_read32(TIMER7_PERIOD)
+#define bfin_write_TIMER7_PERIOD(val) bfin_write32(TIMER7_PERIOD,val)
+#define bfin_read_TIMER7_WIDTH() bfin_read32(TIMER7_WIDTH)
+#define bfin_write_TIMER7_WIDTH(val) bfin_write32(TIMER7_WIDTH,val)
+
+#define bfin_read_TIMER_ENABLE() bfin_read16(TIMER_ENABLE)
+#define bfin_write_TIMER_ENABLE(val) bfin_write16(TIMER_ENABLE,val)
+#define bfin_read_TIMER_DISABLE() bfin_read16(TIMER_DISABLE)
+#define bfin_write_TIMER_DISABLE(val) bfin_write16(TIMER_DISABLE,val)
+#define bfin_read_TIMER_STATUS() bfin_read32(TIMER_STATUS)
+#define bfin_write_TIMER_STATUS(val) bfin_write32(TIMER_STATUS,val)
+
+/* General Purpose I/O Port F (0xFFC00700 - 0xFFC007FF) */
+#define bfin_read_PORTFIO() bfin_read16(PORTFIO)
+#define bfin_write_PORTFIO(val) bfin_write16(PORTFIO,val)
+#define bfin_read_PORTFIO_CLEAR() bfin_read16(PORTFIO_CLEAR)
+#define bfin_write_PORTFIO_CLEAR(val) bfin_write16(PORTFIO_CLEAR,val)
+#define bfin_read_PORTFIO_SET() bfin_read16(PORTFIO_SET)
+#define bfin_write_PORTFIO_SET(val) bfin_write16(PORTFIO_SET,val)
+#define bfin_read_PORTFIO_TOGGLE() bfin_read16(PORTFIO_TOGGLE)
+#define bfin_write_PORTFIO_TOGGLE(val) bfin_write16(PORTFIO_TOGGLE,val)
+#define bfin_read_PORTFIO_MASKA() bfin_read16(PORTFIO_MASKA)
+#define bfin_write_PORTFIO_MASKA(val) bfin_write16(PORTFIO_MASKA,val)
+#define bfin_read_PORTFIO_MASKA_CLEAR() bfin_read16(PORTFIO_MASKA_CLEAR)
+#define bfin_write_PORTFIO_MASKA_CLEAR(val) bfin_write16(PORTFIO_MASKA_CLEAR,val)
+#define bfin_read_PORTFIO_MASKA_SET() bfin_read16(PORTFIO_MASKA_SET)
+#define bfin_write_PORTFIO_MASKA_SET(val) bfin_write16(PORTFIO_MASKA_SET,val)
+#define bfin_read_PORTFIO_MASKA_TOGGLE() bfin_read16(PORTFIO_MASKA_TOGGLE)
+#define bfin_write_PORTFIO_MASKA_TOGGLE(val) bfin_write16(PORTFIO_MASKA_TOGGLE,val)
+#define bfin_read_PORTFIO_MASKB() bfin_read16(PORTFIO_MASKB)
+#define bfin_write_PORTFIO_MASKB(val) bfin_write16(PORTFIO_MASKB,val)
+#define bfin_read_PORTFIO_MASKB_CLEAR() bfin_read16(PORTFIO_MASKB_CLEAR)
+#define bfin_write_PORTFIO_MASKB_CLEAR(val) bfin_write16(PORTFIO_MASKB_CLEAR,val)
+#define bfin_read_PORTFIO_MASKB_SET() bfin_read16(PORTFIO_MASKB_SET)
+#define bfin_write_PORTFIO_MASKB_SET(val) bfin_write16(PORTFIO_MASKB_SET,val)
+#define bfin_read_PORTFIO_MASKB_TOGGLE() bfin_read16(PORTFIO_MASKB_TOGGLE)
+#define bfin_write_PORTFIO_MASKB_TOGGLE(val) bfin_write16(PORTFIO_MASKB_TOGGLE,val)
+#define bfin_read_PORTFIO_DIR() bfin_read16(PORTFIO_DIR)
+#define bfin_write_PORTFIO_DIR(val) bfin_write16(PORTFIO_DIR,val)
+#define bfin_read_PORTFIO_POLAR() bfin_read16(PORTFIO_POLAR)
+#define bfin_write_PORTFIO_POLAR(val) bfin_write16(PORTFIO_POLAR,val)
+#define bfin_read_PORTFIO_EDGE() bfin_read16(PORTFIO_EDGE)
+#define bfin_write_PORTFIO_EDGE(val) bfin_write16(PORTFIO_EDGE,val)
+#define bfin_read_PORTFIO_BOTH() bfin_read16(PORTFIO_BOTH)
+#define bfin_write_PORTFIO_BOTH(val) bfin_write16(PORTFIO_BOTH,val)
+#define bfin_read_PORTFIO_INEN() bfin_read16(PORTFIO_INEN)
+#define bfin_write_PORTFIO_INEN(val) bfin_write16(PORTFIO_INEN,val)
+
+/* SPORT0 Controller (0xFFC00800 - 0xFFC008FF) */
+#define bfin_read_SPORT0_TCR1() bfin_read16(SPORT0_TCR1)
+#define bfin_write_SPORT0_TCR1(val) bfin_write16(SPORT0_TCR1,val)
+#define bfin_read_SPORT0_TCR2() bfin_read16(SPORT0_TCR2)
+#define bfin_write_SPORT0_TCR2(val) bfin_write16(SPORT0_TCR2,val)
+#define bfin_read_SPORT0_TCLKDIV() bfin_read16(SPORT0_TCLKDIV)
+#define bfin_write_SPORT0_TCLKDIV(val) bfin_write16(SPORT0_TCLKDIV,val)
+#define bfin_read_SPORT0_TFSDIV() bfin_read16(SPORT0_TFSDIV)
+#define bfin_write_SPORT0_TFSDIV(val) bfin_write16(SPORT0_TFSDIV,val)
+#define bfin_read_SPORT0_TX() bfin_read32(SPORT0_TX)
+#define bfin_write_SPORT0_TX(val) bfin_write32(SPORT0_TX,val)
+#define bfin_read_SPORT0_RX() bfin_read32(SPORT0_RX)
+#define bfin_write_SPORT0_RX(val) bfin_write32(SPORT0_RX,val)
+#define bfin_read_SPORT0_TX32() bfin_read32(SPORT0_TX)
+#define bfin_write_SPORT0_TX32(val) bfin_write32(SPORT0_TX,val)
+#define bfin_read_SPORT0_RX32() bfin_read32(SPORT0_RX)
+#define bfin_write_SPORT0_RX32(val) bfin_write32(SPORT0_RX,val)
+#define bfin_read_SPORT0_TX16() bfin_read16(SPORT0_TX)
+#define bfin_write_SPORT0_TX16(val) bfin_write16(SPORT0_TX,val)
+#define bfin_read_SPORT0_RX16() bfin_read16(SPORT0_RX)
+#define bfin_write_SPORT0_RX16(val) bfin_write16(SPORT0_RX,val)
+#define bfin_read_SPORT0_RCR1() bfin_read16(SPORT0_RCR1)
+#define bfin_write_SPORT0_RCR1(val) bfin_write16(SPORT0_RCR1,val)
+#define bfin_read_SPORT0_RCR2() bfin_read16(SPORT0_RCR2)
+#define bfin_write_SPORT0_RCR2(val) bfin_write16(SPORT0_RCR2,val)
+#define bfin_read_SPORT0_RCLKDIV() bfin_read16(SPORT0_RCLKDIV)
+#define bfin_write_SPORT0_RCLKDIV(val) bfin_write16(SPORT0_RCLKDIV,val)
+#define bfin_read_SPORT0_RFSDIV() bfin_read16(SPORT0_RFSDIV)
+#define bfin_write_SPORT0_RFSDIV(val) bfin_write16(SPORT0_RFSDIV,val)
+#define bfin_read_SPORT0_STAT() bfin_read16(SPORT0_STAT)
+#define bfin_write_SPORT0_STAT(val) bfin_write16(SPORT0_STAT,val)
+#define bfin_read_SPORT0_CHNL() bfin_read16(SPORT0_CHNL)
+#define bfin_write_SPORT0_CHNL(val) bfin_write16(SPORT0_CHNL,val)
+#define bfin_read_SPORT0_MCMC1() bfin_read16(SPORT0_MCMC1)
+#define bfin_write_SPORT0_MCMC1(val) bfin_write16(SPORT0_MCMC1,val)
+#define bfin_read_SPORT0_MCMC2() bfin_read16(SPORT0_MCMC2)
+#define bfin_write_SPORT0_MCMC2(val) bfin_write16(SPORT0_MCMC2,val)
+#define bfin_read_SPORT0_MTCS0() bfin_read32(SPORT0_MTCS0)
+#define bfin_write_SPORT0_MTCS0(val) bfin_write32(SPORT0_MTCS0,val)
+#define bfin_read_SPORT0_MTCS1() bfin_read32(SPORT0_MTCS1)
+#define bfin_write_SPORT0_MTCS1(val) bfin_write32(SPORT0_MTCS1,val)
+#define bfin_read_SPORT0_MTCS2() bfin_read32(SPORT0_MTCS2)
+#define bfin_write_SPORT0_MTCS2(val) bfin_write32(SPORT0_MTCS2,val)
+#define bfin_read_SPORT0_MTCS3() bfin_read32(SPORT0_MTCS3)
+#define bfin_write_SPORT0_MTCS3(val) bfin_write32(SPORT0_MTCS3,val)
+#define bfin_read_SPORT0_MRCS0() bfin_read32(SPORT0_MRCS0)
+#define bfin_write_SPORT0_MRCS0(val) bfin_write32(SPORT0_MRCS0,val)
+#define bfin_read_SPORT0_MRCS1() bfin_read32(SPORT0_MRCS1)
+#define bfin_write_SPORT0_MRCS1(val) bfin_write32(SPORT0_MRCS1,val)
+#define bfin_read_SPORT0_MRCS2() bfin_read32(SPORT0_MRCS2)
+#define bfin_write_SPORT0_MRCS2(val) bfin_write32(SPORT0_MRCS2,val)
+#define bfin_read_SPORT0_MRCS3() bfin_read32(SPORT0_MRCS3)
+#define bfin_write_SPORT0_MRCS3(val) bfin_write32(SPORT0_MRCS3,val)
+
+/* SPORT1 Controller (0xFFC00900 - 0xFFC009FF) */
+#define bfin_read_SPORT1_TCR1() bfin_read16(SPORT1_TCR1)
+#define bfin_write_SPORT1_TCR1(val) bfin_write16(SPORT1_TCR1,val)
+#define bfin_read_SPORT1_TCR2() bfin_read16(SPORT1_TCR2)
+#define bfin_write_SPORT1_TCR2(val) bfin_write16(SPORT1_TCR2,val)
+#define bfin_read_SPORT1_TCLKDIV() bfin_read16(SPORT1_TCLKDIV)
+#define bfin_write_SPORT1_TCLKDIV(val) bfin_write16(SPORT1_TCLKDIV,val)
+#define bfin_read_SPORT1_TFSDIV() bfin_read16(SPORT1_TFSDIV)
+#define bfin_write_SPORT1_TFSDIV(val) bfin_write16(SPORT1_TFSDIV,val)
+#define bfin_read_SPORT1_TX() bfin_read32(SPORT1_TX)
+#define bfin_write_SPORT1_TX(val) bfin_write32(SPORT1_TX,val)
+#define bfin_read_SPORT1_RX() bfin_read32(SPORT1_RX)
+#define bfin_write_SPORT1_RX(val) bfin_write32(SPORT1_RX,val)
+#define bfin_read_SPORT1_TX32() bfin_read32(SPORT1_TX)
+#define bfin_write_SPORT1_TX32(val) bfin_write32(SPORT1_TX,val)
+#define bfin_read_SPORT1_RX32() bfin_read32(SPORT1_RX)
+#define bfin_write_SPORT1_RX32(val) bfin_write32(SPORT1_RX,val)
+#define bfin_read_SPORT1_TX16() bfin_read16(SPORT1_TX)
+#define bfin_write_SPORT1_TX16(val) bfin_write16(SPORT1_TX,val)
+#define bfin_read_SPORT1_RX16() bfin_read16(SPORT1_RX)
+#define bfin_write_SPORT1_RX16(val) bfin_write16(SPORT1_RX,val)
+#define bfin_read_SPORT1_RCR1() bfin_read16(SPORT1_RCR1)
+#define bfin_write_SPORT1_RCR1(val) bfin_write16(SPORT1_RCR1,val)
+#define bfin_read_SPORT1_RCR2() bfin_read16(SPORT1_RCR2)
+#define bfin_write_SPORT1_RCR2(val) bfin_write16(SPORT1_RCR2,val)
+#define bfin_read_SPORT1_RCLKDIV() bfin_read16(SPORT1_RCLKDIV)
+#define bfin_write_SPORT1_RCLKDIV(val) bfin_write16(SPORT1_RCLKDIV,val)
+#define bfin_read_SPORT1_RFSDIV() bfin_read16(SPORT1_RFSDIV)
+#define bfin_write_SPORT1_RFSDIV(val) bfin_write16(SPORT1_RFSDIV,val)
+#define bfin_read_SPORT1_STAT() bfin_read16(SPORT1_STAT)
+#define bfin_write_SPORT1_STAT(val) bfin_write16(SPORT1_STAT,val)
+#define bfin_read_SPORT1_CHNL() bfin_read16(SPORT1_CHNL)
+#define bfin_write_SPORT1_CHNL(val) bfin_write16(SPORT1_CHNL,val)
+#define bfin_read_SPORT1_MCMC1() bfin_read16(SPORT1_MCMC1)
+#define bfin_write_SPORT1_MCMC1(val) bfin_write16(SPORT1_MCMC1,val)
+#define bfin_read_SPORT1_MCMC2() bfin_read16(SPORT1_MCMC2)
+#define bfin_write_SPORT1_MCMC2(val) bfin_write16(SPORT1_MCMC2,val)
+#define bfin_read_SPORT1_MTCS0() bfin_read32(SPORT1_MTCS0)
+#define bfin_write_SPORT1_MTCS0(val) bfin_write32(SPORT1_MTCS0,val)
+#define bfin_read_SPORT1_MTCS1() bfin_read32(SPORT1_MTCS1)
+#define bfin_write_SPORT1_MTCS1(val) bfin_write32(SPORT1_MTCS1,val)
+#define bfin_read_SPORT1_MTCS2() bfin_read32(SPORT1_MTCS2)
+#define bfin_write_SPORT1_MTCS2(val) bfin_write32(SPORT1_MTCS2,val)
+#define bfin_read_SPORT1_MTCS3() bfin_read32(SPORT1_MTCS3)
+#define bfin_write_SPORT1_MTCS3(val) bfin_write32(SPORT1_MTCS3,val)
+#define bfin_read_SPORT1_MRCS0() bfin_read32(SPORT1_MRCS0)
+#define bfin_write_SPORT1_MRCS0(val) bfin_write32(SPORT1_MRCS0,val)
+#define bfin_read_SPORT1_MRCS1() bfin_read32(SPORT1_MRCS1)
+#define bfin_write_SPORT1_MRCS1(val) bfin_write32(SPORT1_MRCS1,val)
+#define bfin_read_SPORT1_MRCS2() bfin_read32(SPORT1_MRCS2)
+#define bfin_write_SPORT1_MRCS2(val) bfin_write32(SPORT1_MRCS2,val)
+#define bfin_read_SPORT1_MRCS3() bfin_read32(SPORT1_MRCS3)
+#define bfin_write_SPORT1_MRCS3(val) bfin_write32(SPORT1_MRCS3,val)
+
+/* External Bus Interface Unit (0xFFC00A00 - 0xFFC00AFF) */
+#define bfin_read_EBIU_AMGCTL() bfin_read16(EBIU_AMGCTL)
+#define bfin_write_EBIU_AMGCTL(val) bfin_write16(EBIU_AMGCTL,val)
+#define bfin_read_EBIU_AMBCTL0() bfin_read32(EBIU_AMBCTL0)
+#define bfin_write_EBIU_AMBCTL0(val) bfin_write32(EBIU_AMBCTL0,val)
+#define bfin_read_EBIU_AMBCTL1() bfin_read32(EBIU_AMBCTL1)
+#define bfin_write_EBIU_AMBCTL1(val) bfin_write32(EBIU_AMBCTL1,val)
+#define bfin_read_EBIU_SDGCTL() bfin_read32(EBIU_SDGCTL)
+#define bfin_write_EBIU_SDGCTL(val) bfin_write32(EBIU_SDGCTL,val)
+#define bfin_read_EBIU_SDBCTL() bfin_read16(EBIU_SDBCTL)
+#define bfin_write_EBIU_SDBCTL(val) bfin_write16(EBIU_SDBCTL,val)
+#define bfin_read_EBIU_SDRRC() bfin_read16(EBIU_SDRRC)
+#define bfin_write_EBIU_SDRRC(val) bfin_write16(EBIU_SDRRC,val)
+#define bfin_read_EBIU_SDSTAT() bfin_read16(EBIU_SDSTAT)
+#define bfin_write_EBIU_SDSTAT(val) bfin_write16(EBIU_SDSTAT,val)
+
+/* DMA Traffic Control Registers */
+#define pDMA_TCPER ((volatile unsigned short *)DMA_TCPER)
+#define bfin_read_DMA_TCPER() bfin_read16(DMA_TCPER)
+#define bfin_write_DMA_TCPER(val) bfin_write16(DMA_TCPER,val)
+#define pDMA_TCCNT ((volatile unsigned short *)DMA_TCCNT)
+#define bfin_read_DMA_TCCNT() bfin_read16(DMA_TCCNT)
+#define bfin_write_DMA_TCCNT(val) bfin_write16(DMA_TCCNT,val)
+
+/* DMA Controller */
+#define bfin_read_DMA0_CONFIG() bfin_read16(DMA0_CONFIG)
+#define bfin_write_DMA0_CONFIG(val) bfin_write16(DMA0_CONFIG,val)
+#define bfin_read_DMA0_NEXT_DESC_PTR() bfin_read32(DMA0_NEXT_DESC_PTR)
+#define bfin_write_DMA0_NEXT_DESC_PTR(val) bfin_write32(DMA0_NEXT_DESC_PTR,val)
+#define bfin_read_DMA0_START_ADDR() bfin_read32(DMA0_START_ADDR)
+#define bfin_write_DMA0_START_ADDR(val) bfin_write32(DMA0_START_ADDR,val)
+#define bfin_read_DMA0_X_COUNT() bfin_read16(DMA0_X_COUNT)
+#define bfin_write_DMA0_X_COUNT(val) bfin_write16(DMA0_X_COUNT,val)
+#define bfin_read_DMA0_Y_COUNT() bfin_read16(DMA0_Y_COUNT)
+#define bfin_write_DMA0_Y_COUNT(val) bfin_write16(DMA0_Y_COUNT,val)
+#define bfin_read_DMA0_X_MODIFY() bfin_read16(DMA0_X_MODIFY)
+#define bfin_write_DMA0_X_MODIFY(val) bfin_write16(DMA0_X_MODIFY,val)
+#define bfin_read_DMA0_Y_MODIFY() bfin_read16(DMA0_Y_MODIFY)
+#define bfin_write_DMA0_Y_MODIFY(val) bfin_write16(DMA0_Y_MODIFY,val)
+#define bfin_read_DMA0_CURR_DESC_PTR() bfin_read32(DMA0_CURR_DESC_PTR)
+#define bfin_write_DMA0_CURR_DESC_PTR(val) bfin_write32(DMA0_CURR_DESC_PTR,val)
+#define bfin_read_DMA0_CURR_ADDR() bfin_read32(DMA0_CURR_ADDR)
+#define bfin_write_DMA0_CURR_ADDR(val) bfin_write32(DMA0_CURR_ADDR,val)
+#define bfin_read_DMA0_CURR_X_COUNT() bfin_read16(DMA0_CURR_X_COUNT)
+#define bfin_write_DMA0_CURR_X_COUNT(val) bfin_write16(DMA0_CURR_X_COUNT,val)
+#define bfin_read_DMA0_CURR_Y_COUNT() bfin_read16(DMA0_CURR_Y_COUNT)
+#define bfin_write_DMA0_CURR_Y_COUNT(val) bfin_write16(DMA0_CURR_Y_COUNT,val)
+#define bfin_read_DMA0_IRQ_STATUS() bfin_read16(DMA0_IRQ_STATUS)
+#define bfin_write_DMA0_IRQ_STATUS(val) bfin_write16(DMA0_IRQ_STATUS,val)
+#define bfin_read_DMA0_PERIPHERAL_MAP() bfin_read16(DMA0_PERIPHERAL_MAP)
+#define bfin_write_DMA0_PERIPHERAL_MAP(val) bfin_write16(DMA0_PERIPHERAL_MAP,val)
+
+#define bfin_read_DMA1_CONFIG() bfin_read16(DMA1_CONFIG)
+#define bfin_write_DMA1_CONFIG(val) bfin_write16(DMA1_CONFIG,val)
+#define bfin_read_DMA1_NEXT_DESC_PTR() bfin_read32(DMA1_NEXT_DESC_PTR)
+#define bfin_write_DMA1_NEXT_DESC_PTR(val) bfin_write32(DMA1_NEXT_DESC_PTR,val)
+#define bfin_read_DMA1_START_ADDR() bfin_read32(DMA1_START_ADDR)
+#define bfin_write_DMA1_START_ADDR(val) bfin_write32(DMA1_START_ADDR,val)
+#define bfin_read_DMA1_X_COUNT() bfin_read16(DMA1_X_COUNT)
+#define bfin_write_DMA1_X_COUNT(val) bfin_write16(DMA1_X_COUNT,val)
+#define bfin_read_DMA1_Y_COUNT() bfin_read16(DMA1_Y_COUNT)
+#define bfin_write_DMA1_Y_COUNT(val) bfin_write16(DMA1_Y_COUNT,val)
+#define bfin_read_DMA1_X_MODIFY() bfin_read16(DMA1_X_MODIFY)
+#define bfin_write_DMA1_X_MODIFY(val) bfin_write16(DMA1_X_MODIFY,val)
+#define bfin_read_DMA1_Y_MODIFY() bfin_read16(DMA1_Y_MODIFY)
+#define bfin_write_DMA1_Y_MODIFY(val) bfin_write16(DMA1_Y_MODIFY,val)
+#define bfin_read_DMA1_CURR_DESC_PTR() bfin_read32(DMA1_CURR_DESC_PTR)
+#define bfin_write_DMA1_CURR_DESC_PTR(val) bfin_write32(DMA1_CURR_DESC_PTR,val)
+#define bfin_read_DMA1_CURR_ADDR() bfin_read32(DMA1_CURR_ADDR)
+#define bfin_write_DMA1_CURR_ADDR(val) bfin_write32(DMA1_CURR_ADDR,val)
+#define bfin_read_DMA1_CURR_X_COUNT() bfin_read16(DMA1_CURR_X_COUNT)
+#define bfin_write_DMA1_CURR_X_COUNT(val) bfin_write16(DMA1_CURR_X_COUNT,val)
+#define bfin_read_DMA1_CURR_Y_COUNT() bfin_read16(DMA1_CURR_Y_COUNT)
+#define bfin_write_DMA1_CURR_Y_COUNT(val) bfin_write16(DMA1_CURR_Y_COUNT,val)
+#define bfin_read_DMA1_IRQ_STATUS() bfin_read16(DMA1_IRQ_STATUS)
+#define bfin_write_DMA1_IRQ_STATUS(val) bfin_write16(DMA1_IRQ_STATUS,val)
+#define bfin_read_DMA1_PERIPHERAL_MAP() bfin_read16(DMA1_PERIPHERAL_MAP)
+#define bfin_write_DMA1_PERIPHERAL_MAP(val) bfin_write16(DMA1_PERIPHERAL_MAP,val)
+
+#define bfin_read_DMA2_CONFIG() bfin_read16(DMA2_CONFIG)
+#define bfin_write_DMA2_CONFIG(val) bfin_write16(DMA2_CONFIG,val)
+#define bfin_read_DMA2_NEXT_DESC_PTR() bfin_read32(DMA2_NEXT_DESC_PTR)
+#define bfin_write_DMA2_NEXT_DESC_PTR(val) bfin_write32(DMA2_NEXT_DESC_PTR,val)
+#define bfin_read_DMA2_START_ADDR() bfin_read32(DMA2_START_ADDR)
+#define bfin_write_DMA2_START_ADDR(val) bfin_write32(DMA2_START_ADDR,val)
+#define bfin_read_DMA2_X_COUNT() bfin_read16(DMA2_X_COUNT)
+#define bfin_write_DMA2_X_COUNT(val) bfin_write16(DMA2_X_COUNT,val)
+#define bfin_read_DMA2_Y_COUNT() bfin_read16(DMA2_Y_COUNT)
+#define bfin_write_DMA2_Y_COUNT(val) bfin_write16(DMA2_Y_COUNT,val)
+#define bfin_read_DMA2_X_MODIFY() bfin_read16(DMA2_X_MODIFY)
+#define bfin_write_DMA2_X_MODIFY(val) bfin_write16(DMA2_X_MODIFY,val)
+#define bfin_read_DMA2_Y_MODIFY() bfin_read16(DMA2_Y_MODIFY)
+#define bfin_write_DMA2_Y_MODIFY(val) bfin_write16(DMA2_Y_MODIFY,val)
+#define bfin_read_DMA2_CURR_DESC_PTR() bfin_read32(DMA2_CURR_DESC_PTR)
+#define bfin_write_DMA2_CURR_DESC_PTR(val) bfin_write32(DMA2_CURR_DESC_PTR,val)
+#define bfin_read_DMA2_CURR_ADDR() bfin_read32(DMA2_CURR_ADDR)
+#define bfin_write_DMA2_CURR_ADDR(val) bfin_write32(DMA2_CURR_ADDR,val)
+#define bfin_read_DMA2_CURR_X_COUNT() bfin_read16(DMA2_CURR_X_COUNT)
+#define bfin_write_DMA2_CURR_X_COUNT(val) bfin_write16(DMA2_CURR_X_COUNT,val)
+#define bfin_read_DMA2_CURR_Y_COUNT() bfin_read16(DMA2_CURR_Y_COUNT)
+#define bfin_write_DMA2_CURR_Y_COUNT(val) bfin_write16(DMA2_CURR_Y_COUNT,val)
+#define bfin_read_DMA2_IRQ_STATUS() bfin_read16(DMA2_IRQ_STATUS)
+#define bfin_write_DMA2_IRQ_STATUS(val) bfin_write16(DMA2_IRQ_STATUS,val)
+#define bfin_read_DMA2_PERIPHERAL_MAP() bfin_read16(DMA2_PERIPHERAL_MAP)
+#define bfin_write_DMA2_PERIPHERAL_MAP(val) bfin_write16(DMA2_PERIPHERAL_MAP,val)
+
+#define bfin_read_DMA3_CONFIG() bfin_read16(DMA3_CONFIG)
+#define bfin_write_DMA3_CONFIG(val) bfin_write16(DMA3_CONFIG,val)
+#define bfin_read_DMA3_NEXT_DESC_PTR() bfin_read32(DMA3_NEXT_DESC_PTR)
+#define bfin_write_DMA3_NEXT_DESC_PTR(val) bfin_write32(DMA3_NEXT_DESC_PTR,val)
+#define bfin_read_DMA3_START_ADDR() bfin_read32(DMA3_START_ADDR)
+#define bfin_write_DMA3_START_ADDR(val) bfin_write32(DMA3_START_ADDR,val)
+#define bfin_read_DMA3_X_COUNT() bfin_read16(DMA3_X_COUNT)
+#define bfin_write_DMA3_X_COUNT(val) bfin_write16(DMA3_X_COUNT,val)
+#define bfin_read_DMA3_Y_COUNT() bfin_read16(DMA3_Y_COUNT)
+#define bfin_write_DMA3_Y_COUNT(val) bfin_write16(DMA3_Y_COUNT,val)
+#define bfin_read_DMA3_X_MODIFY() bfin_read16(DMA3_X_MODIFY)
+#define bfin_write_DMA3_X_MODIFY(val) bfin_write16(DMA3_X_MODIFY,val)
+#define bfin_read_DMA3_Y_MODIFY() bfin_read16(DMA3_Y_MODIFY)
+#define bfin_write_DMA3_Y_MODIFY(val) bfin_write16(DMA3_Y_MODIFY,val)
+#define bfin_read_DMA3_CURR_DESC_PTR() bfin_read32(DMA3_CURR_DESC_PTR)
+#define bfin_write_DMA3_CURR_DESC_PTR(val) bfin_write32(DMA3_CURR_DESC_PTR,val)
+#define bfin_read_DMA3_CURR_ADDR() bfin_read32(DMA3_CURR_ADDR)
+#define bfin_write_DMA3_CURR_ADDR(val) bfin_write32(DMA3_CURR_ADDR,val)
+#define bfin_read_DMA3_CURR_X_COUNT() bfin_read16(DMA3_CURR_X_COUNT)
+#define bfin_write_DMA3_CURR_X_COUNT(val) bfin_write16(DMA3_CURR_X_COUNT,val)
+#define bfin_read_DMA3_CURR_Y_COUNT() bfin_read16(DMA3_CURR_Y_COUNT)
+#define bfin_write_DMA3_CURR_Y_COUNT(val) bfin_write16(DMA3_CURR_Y_COUNT,val)
+#define bfin_read_DMA3_IRQ_STATUS() bfin_read16(DMA3_IRQ_STATUS)
+#define bfin_write_DMA3_IRQ_STATUS(val) bfin_write16(DMA3_IRQ_STATUS,val)
+#define bfin_read_DMA3_PERIPHERAL_MAP() bfin_read16(DMA3_PERIPHERAL_MAP)
+#define bfin_write_DMA3_PERIPHERAL_MAP(val) bfin_write16(DMA3_PERIPHERAL_MAP,val)
+
+#define bfin_read_DMA4_CONFIG() bfin_read16(DMA4_CONFIG)
+#define bfin_write_DMA4_CONFIG(val) bfin_write16(DMA4_CONFIG,val)
+#define bfin_read_DMA4_NEXT_DESC_PTR() bfin_read32(DMA4_NEXT_DESC_PTR)
+#define bfin_write_DMA4_NEXT_DESC_PTR(val) bfin_write32(DMA4_NEXT_DESC_PTR,val)
+#define bfin_read_DMA4_START_ADDR() bfin_read32(DMA4_START_ADDR)
+#define bfin_write_DMA4_START_ADDR(val) bfin_write32(DMA4_START_ADDR,val)
+#define bfin_read_DMA4_X_COUNT() bfin_read16(DMA4_X_COUNT)
+#define bfin_write_DMA4_X_COUNT(val) bfin_write16(DMA4_X_COUNT,val)
+#define bfin_read_DMA4_Y_COUNT() bfin_read16(DMA4_Y_COUNT)
+#define bfin_write_DMA4_Y_COUNT(val) bfin_write16(DMA4_Y_COUNT,val)
+#define bfin_read_DMA4_X_MODIFY() bfin_read16(DMA4_X_MODIFY)
+#define bfin_write_DMA4_X_MODIFY(val) bfin_write16(DMA4_X_MODIFY,val)
+#define bfin_read_DMA4_Y_MODIFY() bfin_read16(DMA4_Y_MODIFY)
+#define bfin_write_DMA4_Y_MODIFY(val) bfin_write16(DMA4_Y_MODIFY,val)
+#define bfin_read_DMA4_CURR_DESC_PTR() bfin_read32(DMA4_CURR_DESC_PTR)
+#define bfin_write_DMA4_CURR_DESC_PTR(val) bfin_write32(DMA4_CURR_DESC_PTR,val)
+#define bfin_read_DMA4_CURR_ADDR() bfin_read32(DMA4_CURR_ADDR)
+#define bfin_write_DMA4_CURR_ADDR(val) bfin_write32(DMA4_CURR_ADDR,val)
+#define bfin_read_DMA4_CURR_X_COUNT() bfin_read16(DMA4_CURR_X_COUNT)
+#define bfin_write_DMA4_CURR_X_COUNT(val) bfin_write16(DMA4_CURR_X_COUNT,val)
+#define bfin_read_DMA4_CURR_Y_COUNT() bfin_read16(DMA4_CURR_Y_COUNT)
+#define bfin_write_DMA4_CURR_Y_COUNT(val) bfin_write16(DMA4_CURR_Y_COUNT,val)
+#define bfin_read_DMA4_IRQ_STATUS() bfin_read16(DMA4_IRQ_STATUS)
+#define bfin_write_DMA4_IRQ_STATUS(val) bfin_write16(DMA4_IRQ_STATUS,val)
+#define bfin_read_DMA4_PERIPHERAL_MAP() bfin_read16(DMA4_PERIPHERAL_MAP)
+#define bfin_write_DMA4_PERIPHERAL_MAP(val) bfin_write16(DMA4_PERIPHERAL_MAP,val)
+
+#define bfin_read_DMA5_CONFIG() bfin_read16(DMA5_CONFIG)
+#define bfin_write_DMA5_CONFIG(val) bfin_write16(DMA5_CONFIG,val)
+#define bfin_read_DMA5_NEXT_DESC_PTR() bfin_read32(DMA5_NEXT_DESC_PTR)
+#define bfin_write_DMA5_NEXT_DESC_PTR(val) bfin_write32(DMA5_NEXT_DESC_PTR,val)
+#define bfin_read_DMA5_START_ADDR() bfin_read32(DMA5_START_ADDR)
+#define bfin_write_DMA5_START_ADDR(val) bfin_write32(DMA5_START_ADDR,val)
+#define bfin_read_DMA5_X_COUNT() bfin_read16(DMA5_X_COUNT)
+#define bfin_write_DMA5_X_COUNT(val) bfin_write16(DMA5_X_COUNT,val)
+#define bfin_read_DMA5_Y_COUNT() bfin_read16(DMA5_Y_COUNT)
+#define bfin_write_DMA5_Y_COUNT(val) bfin_write16(DMA5_Y_COUNT,val)
+#define bfin_read_DMA5_X_MODIFY() bfin_read16(DMA5_X_MODIFY)
+#define bfin_write_DMA5_X_MODIFY(val) bfin_write16(DMA5_X_MODIFY,val)
+#define bfin_read_DMA5_Y_MODIFY() bfin_read16(DMA5_Y_MODIFY)
+#define bfin_write_DMA5_Y_MODIFY(val) bfin_write16(DMA5_Y_MODIFY,val)
+#define bfin_read_DMA5_CURR_DESC_PTR() bfin_read32(DMA5_CURR_DESC_PTR)
+#define bfin_write_DMA5_CURR_DESC_PTR(val) bfin_write32(DMA5_CURR_DESC_PTR,val)
+#define bfin_read_DMA5_CURR_ADDR() bfin_read32(DMA5_CURR_ADDR)
+#define bfin_write_DMA5_CURR_ADDR(val) bfin_write32(DMA5_CURR_ADDR,val)
+#define bfin_read_DMA5_CURR_X_COUNT() bfin_read16(DMA5_CURR_X_COUNT)
+#define bfin_write_DMA5_CURR_X_COUNT(val) bfin_write16(DMA5_CURR_X_COUNT,val)
+#define bfin_read_DMA5_CURR_Y_COUNT() bfin_read16(DMA5_CURR_Y_COUNT)
+#define bfin_write_DMA5_CURR_Y_COUNT(val) bfin_write16(DMA5_CURR_Y_COUNT,val)
+#define bfin_read_DMA5_IRQ_STATUS() bfin_read16(DMA5_IRQ_STATUS)
+#define bfin_write_DMA5_IRQ_STATUS(val) bfin_write16(DMA5_IRQ_STATUS,val)
+#define bfin_read_DMA5_PERIPHERAL_MAP() bfin_read16(DMA5_PERIPHERAL_MAP)
+#define bfin_write_DMA5_PERIPHERAL_MAP(val) bfin_write16(DMA5_PERIPHERAL_MAP,val)
+
+#define bfin_read_DMA6_CONFIG() bfin_read16(DMA6_CONFIG)
+#define bfin_write_DMA6_CONFIG(val) bfin_write16(DMA6_CONFIG,val)
+#define bfin_read_DMA6_NEXT_DESC_PTR() bfin_read32(DMA6_NEXT_DESC_PTR)
+#define bfin_write_DMA6_NEXT_DESC_PTR(val) bfin_write32(DMA6_NEXT_DESC_PTR,val)
+#define bfin_read_DMA6_START_ADDR() bfin_read32(DMA6_START_ADDR)
+#define bfin_write_DMA6_START_ADDR(val) bfin_write32(DMA6_START_ADDR,val)
+#define bfin_read_DMA6_X_COUNT() bfin_read16(DMA6_X_COUNT)
+#define bfin_write_DMA6_X_COUNT(val) bfin_write16(DMA6_X_COUNT,val)
+#define bfin_read_DMA6_Y_COUNT() bfin_read16(DMA6_Y_COUNT)
+#define bfin_write_DMA6_Y_COUNT(val) bfin_write16(DMA6_Y_COUNT,val)
+#define bfin_read_DMA6_X_MODIFY() bfin_read16(DMA6_X_MODIFY)
+#define bfin_write_DMA6_X_MODIFY(val) bfin_write16(DMA6_X_MODIFY,val)
+#define bfin_read_DMA6_Y_MODIFY() bfin_read16(DMA6_Y_MODIFY)
+#define bfin_write_DMA6_Y_MODIFY(val) bfin_write16(DMA6_Y_MODIFY,val)
+#define bfin_read_DMA6_CURR_DESC_PTR() bfin_read32(DMA6_CURR_DESC_PTR)
+#define bfin_write_DMA6_CURR_DESC_PTR(val) bfin_write32(DMA6_CURR_DESC_PTR,val)
+#define bfin_read_DMA6_CURR_ADDR() bfin_read32(DMA6_CURR_ADDR)
+#define bfin_write_DMA6_CURR_ADDR(val) bfin_write32(DMA6_CURR_ADDR,val)
+#define bfin_read_DMA6_CURR_X_COUNT() bfin_read16(DMA6_CURR_X_COUNT)
+#define bfin_write_DMA6_CURR_X_COUNT(val) bfin_write16(DMA6_CURR_X_COUNT,val)
+#define bfin_read_DMA6_CURR_Y_COUNT() bfin_read16(DMA6_CURR_Y_COUNT)
+#define bfin_write_DMA6_CURR_Y_COUNT(val) bfin_write16(DMA6_CURR_Y_COUNT,val)
+#define bfin_read_DMA6_IRQ_STATUS() bfin_read16(DMA6_IRQ_STATUS)
+#define bfin_write_DMA6_IRQ_STATUS(val) bfin_write16(DMA6_IRQ_STATUS,val)
+#define bfin_read_DMA6_PERIPHERAL_MAP() bfin_read16(DMA6_PERIPHERAL_MAP)
+#define bfin_write_DMA6_PERIPHERAL_MAP(val) bfin_write16(DMA6_PERIPHERAL_MAP,val)
+
+#define bfin_read_DMA7_CONFIG() bfin_read16(DMA7_CONFIG)
+#define bfin_write_DMA7_CONFIG(val) bfin_write16(DMA7_CONFIG,val)
+#define bfin_read_DMA7_NEXT_DESC_PTR() bfin_read32(DMA7_NEXT_DESC_PTR)
+#define bfin_write_DMA7_NEXT_DESC_PTR(val) bfin_write32(DMA7_NEXT_DESC_PTR,val)
+#define bfin_read_DMA7_START_ADDR() bfin_read32(DMA7_START_ADDR)
+#define bfin_write_DMA7_START_ADDR(val) bfin_write32(DMA7_START_ADDR,val)
+#define bfin_read_DMA7_X_COUNT() bfin_read16(DMA7_X_COUNT)
+#define bfin_write_DMA7_X_COUNT(val) bfin_write16(DMA7_X_COUNT,val)
+#define bfin_read_DMA7_Y_COUNT() bfin_read16(DMA7_Y_COUNT)
+#define bfin_write_DMA7_Y_COUNT(val) bfin_write16(DMA7_Y_COUNT,val)
+#define bfin_read_DMA7_X_MODIFY() bfin_read16(DMA7_X_MODIFY)
+#define bfin_write_DMA7_X_MODIFY(val) bfin_write16(DMA7_X_MODIFY,val)
+#define bfin_read_DMA7_Y_MODIFY() bfin_read16(DMA7_Y_MODIFY)
+#define bfin_write_DMA7_Y_MODIFY(val) bfin_write16(DMA7_Y_MODIFY,val)
+#define bfin_read_DMA7_CURR_DESC_PTR() bfin_read32(DMA7_CURR_DESC_PTR)
+#define bfin_write_DMA7_CURR_DESC_PTR(val) bfin_write32(DMA7_CURR_DESC_PTR,val)
+#define bfin_read_DMA7_CURR_ADDR() bfin_read32(DMA7_CURR_ADDR)
+#define bfin_write_DMA7_CURR_ADDR(val) bfin_write32(DMA7_CURR_ADDR,val)
+#define bfin_read_DMA7_CURR_X_COUNT() bfin_read16(DMA7_CURR_X_COUNT)
+#define bfin_write_DMA7_CURR_X_COUNT(val) bfin_write16(DMA7_CURR_X_COUNT,val)
+#define bfin_read_DMA7_CURR_Y_COUNT() bfin_read16(DMA7_CURR_Y_COUNT)
+#define bfin_write_DMA7_CURR_Y_COUNT(val) bfin_write16(DMA7_CURR_Y_COUNT,val)
+#define bfin_read_DMA7_IRQ_STATUS() bfin_read16(DMA7_IRQ_STATUS)
+#define bfin_write_DMA7_IRQ_STATUS(val) bfin_write16(DMA7_IRQ_STATUS,val)
+#define bfin_read_DMA7_PERIPHERAL_MAP() bfin_read16(DMA7_PERIPHERAL_MAP)
+#define bfin_write_DMA7_PERIPHERAL_MAP(val) bfin_write16(DMA7_PERIPHERAL_MAP,val)
+
+#define bfin_read_DMA8_CONFIG() bfin_read16(DMA8_CONFIG)
+#define bfin_write_DMA8_CONFIG(val) bfin_write16(DMA8_CONFIG,val)
+#define bfin_read_DMA8_NEXT_DESC_PTR() bfin_read32(DMA8_NEXT_DESC_PTR)
+#define bfin_write_DMA8_NEXT_DESC_PTR(val) bfin_write32(DMA8_NEXT_DESC_PTR,val)
+#define bfin_read_DMA8_START_ADDR() bfin_read32(DMA8_START_ADDR)
+#define bfin_write_DMA8_START_ADDR(val) bfin_write32(DMA8_START_ADDR,val)
+#define bfin_read_DMA8_X_COUNT() bfin_read16(DMA8_X_COUNT)
+#define bfin_write_DMA8_X_COUNT(val) bfin_write16(DMA8_X_COUNT,val)
+#define bfin_read_DMA8_Y_COUNT() bfin_read16(DMA8_Y_COUNT)
+#define bfin_write_DMA8_Y_COUNT(val) bfin_write16(DMA8_Y_COUNT,val)
+#define bfin_read_DMA8_X_MODIFY() bfin_read16(DMA8_X_MODIFY)
+#define bfin_write_DMA8_X_MODIFY(val) bfin_write16(DMA8_X_MODIFY,val)
+#define bfin_read_DMA8_Y_MODIFY() bfin_read16(DMA8_Y_MODIFY)
+#define bfin_write_DMA8_Y_MODIFY(val) bfin_write16(DMA8_Y_MODIFY,val)
+#define bfin_read_DMA8_CURR_DESC_PTR() bfin_read32(DMA8_CURR_DESC_PTR)
+#define bfin_write_DMA8_CURR_DESC_PTR(val) bfin_write32(DMA8_CURR_DESC_PTR,val)
+#define bfin_read_DMA8_CURR_ADDR() bfin_read32(DMA8_CURR_ADDR)
+#define bfin_write_DMA8_CURR_ADDR(val) bfin_write32(DMA8_CURR_ADDR,val)
+#define bfin_read_DMA8_CURR_X_COUNT() bfin_read16(DMA8_CURR_X_COUNT)
+#define bfin_write_DMA8_CURR_X_COUNT(val) bfin_write16(DMA8_CURR_X_COUNT,val)
+#define bfin_read_DMA8_CURR_Y_COUNT() bfin_read16(DMA8_CURR_Y_COUNT)
+#define bfin_write_DMA8_CURR_Y_COUNT(val) bfin_write16(DMA8_CURR_Y_COUNT,val)
+#define bfin_read_DMA8_IRQ_STATUS() bfin_read16(DMA8_IRQ_STATUS)
+#define bfin_write_DMA8_IRQ_STATUS(val) bfin_write16(DMA8_IRQ_STATUS,val)
+#define bfin_read_DMA8_PERIPHERAL_MAP() bfin_read16(DMA8_PERIPHERAL_MAP)
+#define bfin_write_DMA8_PERIPHERAL_MAP(val) bfin_write16(DMA8_PERIPHERAL_MAP,val)
+
+#define bfin_read_DMA9_CONFIG() bfin_read16(DMA9_CONFIG)
+#define bfin_write_DMA9_CONFIG(val) bfin_write16(DMA9_CONFIG,val)
+#define bfin_read_DMA9_NEXT_DESC_PTR() bfin_read32(DMA9_NEXT_DESC_PTR)
+#define bfin_write_DMA9_NEXT_DESC_PTR(val) bfin_write32(DMA9_NEXT_DESC_PTR,val)
+#define bfin_read_DMA9_START_ADDR() bfin_read32(DMA9_START_ADDR)
+#define bfin_write_DMA9_START_ADDR(val) bfin_write32(DMA9_START_ADDR,val)
+#define bfin_read_DMA9_X_COUNT() bfin_read16(DMA9_X_COUNT)
+#define bfin_write_DMA9_X_COUNT(val) bfin_write16(DMA9_X_COUNT,val)
+#define bfin_read_DMA9_Y_COUNT() bfin_read16(DMA9_Y_COUNT)
+#define bfin_write_DMA9_Y_COUNT(val) bfin_write16(DMA9_Y_COUNT,val)
+#define bfin_read_DMA9_X_MODIFY() bfin_read16(DMA9_X_MODIFY)
+#define bfin_write_DMA9_X_MODIFY(val) bfin_write16(DMA9_X_MODIFY,val)
+#define bfin_read_DMA9_Y_MODIFY() bfin_read16(DMA9_Y_MODIFY)
+#define bfin_write_DMA9_Y_MODIFY(val) bfin_write16(DMA9_Y_MODIFY,val)
+#define bfin_read_DMA9_CURR_DESC_PTR() bfin_read32(DMA9_CURR_DESC_PTR)
+#define bfin_write_DMA9_CURR_DESC_PTR(val) bfin_write32(DMA9_CURR_DESC_PTR,val)
+#define bfin_read_DMA9_CURR_ADDR() bfin_read32(DMA9_CURR_ADDR)
+#define bfin_write_DMA9_CURR_ADDR(val) bfin_write32(DMA9_CURR_ADDR,val)
+#define bfin_read_DMA9_CURR_X_COUNT() bfin_read16(DMA9_CURR_X_COUNT)
+#define bfin_write_DMA9_CURR_X_COUNT(val) bfin_write16(DMA9_CURR_X_COUNT,val)
+#define bfin_read_DMA9_CURR_Y_COUNT() bfin_read16(DMA9_CURR_Y_COUNT)
+#define bfin_write_DMA9_CURR_Y_COUNT(val) bfin_write16(DMA9_CURR_Y_COUNT,val)
+#define bfin_read_DMA9_IRQ_STATUS() bfin_read16(DMA9_IRQ_STATUS)
+#define bfin_write_DMA9_IRQ_STATUS(val) bfin_write16(DMA9_IRQ_STATUS,val)
+#define bfin_read_DMA9_PERIPHERAL_MAP() bfin_read16(DMA9_PERIPHERAL_MAP)
+#define bfin_write_DMA9_PERIPHERAL_MAP(val) bfin_write16(DMA9_PERIPHERAL_MAP,val)
+
+#define bfin_read_DMA10_CONFIG() bfin_read16(DMA10_CONFIG)
+#define bfin_write_DMA10_CONFIG(val) bfin_write16(DMA10_CONFIG,val)
+#define bfin_read_DMA10_NEXT_DESC_PTR() bfin_read32(DMA10_NEXT_DESC_PTR)
+#define bfin_write_DMA10_NEXT_DESC_PTR(val) bfin_write32(DMA10_NEXT_DESC_PTR,val)
+#define bfin_read_DMA10_START_ADDR() bfin_read32(DMA10_START_ADDR)
+#define bfin_write_DMA10_START_ADDR(val) bfin_write32(DMA10_START_ADDR,val)
+#define bfin_read_DMA10_X_COUNT() bfin_read16(DMA10_X_COUNT)
+#define bfin_write_DMA10_X_COUNT(val) bfin_write16(DMA10_X_COUNT,val)
+#define bfin_read_DMA10_Y_COUNT() bfin_read16(DMA10_Y_COUNT)
+#define bfin_write_DMA10_Y_COUNT(val) bfin_write16(DMA10_Y_COUNT,val)
+#define bfin_read_DMA10_X_MODIFY() bfin_read16(DMA10_X_MODIFY)
+#define bfin_write_DMA10_X_MODIFY(val) bfin_write16(DMA10_X_MODIFY,val)
+#define bfin_read_DMA10_Y_MODIFY() bfin_read16(DMA10_Y_MODIFY)
+#define bfin_write_DMA10_Y_MODIFY(val) bfin_write16(DMA10_Y_MODIFY,val)
+#define bfin_read_DMA10_CURR_DESC_PTR() bfin_read32(DMA10_CURR_DESC_PTR)
+#define bfin_write_DMA10_CURR_DESC_PTR(val) bfin_write32(DMA10_CURR_DESC_PTR,val)
+#define bfin_read_DMA10_CURR_ADDR() bfin_read32(DMA10_CURR_ADDR)
+#define bfin_write_DMA10_CURR_ADDR(val) bfin_write32(DMA10_CURR_ADDR,val)
+#define bfin_read_DMA10_CURR_X_COUNT() bfin_read16(DMA10_CURR_X_COUNT)
+#define bfin_write_DMA10_CURR_X_COUNT(val) bfin_write16(DMA10_CURR_X_COUNT,val)
+#define bfin_read_DMA10_CURR_Y_COUNT() bfin_read16(DMA10_CURR_Y_COUNT)
+#define bfin_write_DMA10_CURR_Y_COUNT(val) bfin_write16(DMA10_CURR_Y_COUNT,val)
+#define bfin_read_DMA10_IRQ_STATUS() bfin_read16(DMA10_IRQ_STATUS)
+#define bfin_write_DMA10_IRQ_STATUS(val) bfin_write16(DMA10_IRQ_STATUS,val)
+#define bfin_read_DMA10_PERIPHERAL_MAP() bfin_read16(DMA10_PERIPHERAL_MAP)
+#define bfin_write_DMA10_PERIPHERAL_MAP(val) bfin_write16(DMA10_PERIPHERAL_MAP,val)
+
+#define bfin_read_DMA11_CONFIG() bfin_read16(DMA11_CONFIG)
+#define bfin_write_DMA11_CONFIG(val) bfin_write16(DMA11_CONFIG,val)
+#define bfin_read_DMA11_NEXT_DESC_PTR() bfin_read32(DMA11_NEXT_DESC_PTR)
+#define bfin_write_DMA11_NEXT_DESC_PTR(val) bfin_write32(DMA11_NEXT_DESC_PTR,val)
+#define bfin_read_DMA11_START_ADDR() bfin_read32(DMA11_START_ADDR)
+#define bfin_write_DMA11_START_ADDR(val) bfin_write32(DMA11_START_ADDR,val)
+#define bfin_read_DMA11_X_COUNT() bfin_read16(DMA11_X_COUNT)
+#define bfin_write_DMA11_X_COUNT(val) bfin_write16(DMA11_X_COUNT,val)
+#define bfin_read_DMA11_Y_COUNT() bfin_read16(DMA11_Y_COUNT)
+#define bfin_write_DMA11_Y_COUNT(val) bfin_write16(DMA11_Y_COUNT,val)
+#define bfin_read_DMA11_X_MODIFY() bfin_read16(DMA11_X_MODIFY)
+#define bfin_write_DMA11_X_MODIFY(val) bfin_write16(DMA11_X_MODIFY,val)
+#define bfin_read_DMA11_Y_MODIFY() bfin_read16(DMA11_Y_MODIFY)
+#define bfin_write_DMA11_Y_MODIFY(val) bfin_write16(DMA11_Y_MODIFY,val)
+#define bfin_read_DMA11_CURR_DESC_PTR() bfin_read32(DMA11_CURR_DESC_PTR)
+#define bfin_write_DMA11_CURR_DESC_PTR(val) bfin_write32(DMA11_CURR_DESC_PTR,val)
+#define bfin_read_DMA11_CURR_ADDR() bfin_read32(DMA11_CURR_ADDR)
+#define bfin_write_DMA11_CURR_ADDR(val) bfin_write32(DMA11_CURR_ADDR,val)
+#define bfin_read_DMA11_CURR_X_COUNT() bfin_read16(DMA11_CURR_X_COUNT)
+#define bfin_write_DMA11_CURR_X_COUNT(val) bfin_write16(DMA11_CURR_X_COUNT,val)
+#define bfin_read_DMA11_CURR_Y_COUNT() bfin_read16(DMA11_CURR_Y_COUNT)
+#define bfin_write_DMA11_CURR_Y_COUNT(val) bfin_write16(DMA11_CURR_Y_COUNT,val)
+#define bfin_read_DMA11_IRQ_STATUS() bfin_read16(DMA11_IRQ_STATUS)
+#define bfin_write_DMA11_IRQ_STATUS(val) bfin_write16(DMA11_IRQ_STATUS,val)
+#define bfin_read_DMA11_PERIPHERAL_MAP() bfin_read16(DMA11_PERIPHERAL_MAP)
+#define bfin_write_DMA11_PERIPHERAL_MAP(val) bfin_write16(DMA11_PERIPHERAL_MAP,val)
+
+#define bfin_read_MDMA_D0_CONFIG() bfin_read16(MDMA_D0_CONFIG)
+#define bfin_write_MDMA_D0_CONFIG(val) bfin_write16(MDMA_D0_CONFIG,val)
+#define bfin_read_MDMA_D0_NEXT_DESC_PTR() bfin_read32(MDMA_D0_NEXT_DESC_PTR)
+#define bfin_write_MDMA_D0_NEXT_DESC_PTR(val) bfin_write32(MDMA_D0_NEXT_DESC_PTR,val)
+#define bfin_read_MDMA_D0_START_ADDR() bfin_read32(MDMA_D0_START_ADDR)
+#define bfin_write_MDMA_D0_START_ADDR(val) bfin_write32(MDMA_D0_START_ADDR,val)
+#define bfin_read_MDMA_D0_X_COUNT() bfin_read16(MDMA_D0_X_COUNT)
+#define bfin_write_MDMA_D0_X_COUNT(val) bfin_write16(MDMA_D0_X_COUNT,val)
+#define bfin_read_MDMA_D0_Y_COUNT() bfin_read16(MDMA_D0_Y_COUNT)
+#define bfin_write_MDMA_D0_Y_COUNT(val) bfin_write16(MDMA_D0_Y_COUNT,val)
+#define bfin_read_MDMA_D0_X_MODIFY() bfin_read16(MDMA_D0_X_MODIFY)
+#define bfin_write_MDMA_D0_X_MODIFY(val) bfin_write16(MDMA_D0_X_MODIFY,val)
+#define bfin_read_MDMA_D0_Y_MODIFY() bfin_read16(MDMA_D0_Y_MODIFY)
+#define bfin_write_MDMA_D0_Y_MODIFY(val) bfin_write16(MDMA_D0_Y_MODIFY,val)
+#define bfin_read_MDMA_D0_CURR_DESC_PTR() bfin_read32(MDMA_D0_CURR_DESC_PTR)
+#define bfin_write_MDMA_D0_CURR_DESC_PTR(val) bfin_write32(MDMA_D0_CURR_DESC_PTR,val)
+#define bfin_read_MDMA_D0_CURR_ADDR() bfin_read32(MDMA_D0_CURR_ADDR)
+#define bfin_write_MDMA_D0_CURR_ADDR(val) bfin_write32(MDMA_D0_CURR_ADDR,val)
+#define bfin_read_MDMA_D0_CURR_X_COUNT() bfin_read16(MDMA_D0_CURR_X_COUNT)
+#define bfin_write_MDMA_D0_CURR_X_COUNT(val) bfin_write16(MDMA_D0_CURR_X_COUNT,val)
+#define bfin_read_MDMA_D0_CURR_Y_COUNT() bfin_read16(MDMA_D0_CURR_Y_COUNT)
+#define bfin_write_MDMA_D0_CURR_Y_COUNT(val) bfin_write16(MDMA_D0_CURR_Y_COUNT,val)
+#define bfin_read_MDMA_D0_IRQ_STATUS() bfin_read16(MDMA_D0_IRQ_STATUS)
+#define bfin_write_MDMA_D0_IRQ_STATUS(val) bfin_write16(MDMA_D0_IRQ_STATUS,val)
+#define bfin_read_MDMA_D0_PERIPHERAL_MAP() bfin_read16(MDMA_D0_PERIPHERAL_MAP)
+#define bfin_write_MDMA_D0_PERIPHERAL_MAP(val) bfin_write16(MDMA_D0_PERIPHERAL_MAP,val)
+
+#define bfin_read_MDMA_S0_CONFIG() bfin_read16(MDMA_S0_CONFIG)
+#define bfin_write_MDMA_S0_CONFIG(val) bfin_write16(MDMA_S0_CONFIG,val)
+#define bfin_read_MDMA_S0_NEXT_DESC_PTR() bfin_read32(MDMA_S0_NEXT_DESC_PTR)
+#define bfin_write_MDMA_S0_NEXT_DESC_PTR(val) bfin_write32(MDMA_S0_NEXT_DESC_PTR,val)
+#define bfin_read_MDMA_S0_START_ADDR() bfin_read32(MDMA_S0_START_ADDR)
+#define bfin_write_MDMA_S0_START_ADDR(val) bfin_write32(MDMA_S0_START_ADDR,val)
+#define bfin_read_MDMA_S0_X_COUNT() bfin_read16(MDMA_S0_X_COUNT)
+#define bfin_write_MDMA_S0_X_COUNT(val) bfin_write16(MDMA_S0_X_COUNT,val)
+#define bfin_read_MDMA_S0_Y_COUNT() bfin_read16(MDMA_S0_Y_COUNT)
+#define bfin_write_MDMA_S0_Y_COUNT(val) bfin_write16(MDMA_S0_Y_COUNT,val)
+#define bfin_read_MDMA_S0_X_MODIFY() bfin_read16(MDMA_S0_X_MODIFY)
+#define bfin_write_MDMA_S0_X_MODIFY(val) bfin_write16(MDMA_S0_X_MODIFY,val)
+#define bfin_read_MDMA_S0_Y_MODIFY() bfin_read16(MDMA_S0_Y_MODIFY)
+#define bfin_write_MDMA_S0_Y_MODIFY(val) bfin_write16(MDMA_S0_Y_MODIFY,val)
+#define bfin_read_MDMA_S0_CURR_DESC_PTR() bfin_read32(MDMA_S0_CURR_DESC_PTR)
+#define bfin_write_MDMA_S0_CURR_DESC_PTR(val) bfin_write32(MDMA_S0_CURR_DESC_PTR,val)
+#define bfin_read_MDMA_S0_CURR_ADDR() bfin_read32(MDMA_S0_CURR_ADDR)
+#define bfin_write_MDMA_S0_CURR_ADDR(val) bfin_write32(MDMA_S0_CURR_ADDR,val)
+#define bfin_read_MDMA_S0_CURR_X_COUNT() bfin_read16(MDMA_S0_CURR_X_COUNT)
+#define bfin_write_MDMA_S0_CURR_X_COUNT(val) bfin_write16(MDMA_S0_CURR_X_COUNT,val)
+#define bfin_read_MDMA_S0_CURR_Y_COUNT() bfin_read16(MDMA_S0_CURR_Y_COUNT)
+#define bfin_write_MDMA_S0_CURR_Y_COUNT(val) bfin_write16(MDMA_S0_CURR_Y_COUNT,val)
+#define bfin_read_MDMA_S0_IRQ_STATUS() bfin_read16(MDMA_S0_IRQ_STATUS)
+#define bfin_write_MDMA_S0_IRQ_STATUS(val) bfin_write16(MDMA_S0_IRQ_STATUS,val)
+#define bfin_read_MDMA_S0_PERIPHERAL_MAP() bfin_read16(MDMA_S0_PERIPHERAL_MAP)
+#define bfin_write_MDMA_S0_PERIPHERAL_MAP(val) bfin_write16(MDMA_S0_PERIPHERAL_MAP,val)
+
+#define bfin_read_MDMA_D1_CONFIG() bfin_read16(MDMA_D1_CONFIG)
+#define bfin_write_MDMA_D1_CONFIG(val) bfin_write16(MDMA_D1_CONFIG,val)
+#define bfin_read_MDMA_D1_NEXT_DESC_PTR() bfin_read32(MDMA_D1_NEXT_DESC_PTR)
+#define bfin_write_MDMA_D1_NEXT_DESC_PTR(val) bfin_write32(MDMA_D1_NEXT_DESC_PTR,val)
+#define bfin_read_MDMA_D1_START_ADDR() bfin_read32(MDMA_D1_START_ADDR)
+#define bfin_write_MDMA_D1_START_ADDR(val) bfin_write32(MDMA_D1_START_ADDR,val)
+#define bfin_read_MDMA_D1_X_COUNT() bfin_read16(MDMA_D1_X_COUNT)
+#define bfin_write_MDMA_D1_X_COUNT(val) bfin_write16(MDMA_D1_X_COUNT,val)
+#define bfin_read_MDMA_D1_Y_COUNT() bfin_read16(MDMA_D1_Y_COUNT)
+#define bfin_write_MDMA_D1_Y_COUNT(val) bfin_write16(MDMA_D1_Y_COUNT,val)
+#define bfin_read_MDMA_D1_X_MODIFY() bfin_read16(MDMA_D1_X_MODIFY)
+#define bfin_write_MDMA_D1_X_MODIFY(val) bfin_write16(MDMA_D1_X_MODIFY,val)
+#define bfin_read_MDMA_D1_Y_MODIFY() bfin_read16(MDMA_D1_Y_MODIFY)
+#define bfin_write_MDMA_D1_Y_MODIFY(val) bfin_write16(MDMA_D1_Y_MODIFY,val)
+#define bfin_read_MDMA_D1_CURR_DESC_PTR() bfin_read32(MDMA_D1_CURR_DESC_PTR)
+#define bfin_write_MDMA_D1_CURR_DESC_PTR(val) bfin_write32(MDMA_D1_CURR_DESC_PTR,val)
+#define bfin_read_MDMA_D1_CURR_ADDR() bfin_read32(MDMA_D1_CURR_ADDR)
+#define bfin_write_MDMA_D1_CURR_ADDR(val) bfin_write32(MDMA_D1_CURR_ADDR,val)
+#define bfin_read_MDMA_D1_CURR_X_COUNT() bfin_read16(MDMA_D1_CURR_X_COUNT)
+#define bfin_write_MDMA_D1_CURR_X_COUNT(val) bfin_write16(MDMA_D1_CURR_X_COUNT,val)
+#define bfin_read_MDMA_D1_CURR_Y_COUNT() bfin_read16(MDMA_D1_CURR_Y_COUNT)
+#define bfin_write_MDMA_D1_CURR_Y_COUNT(val) bfin_write16(MDMA_D1_CURR_Y_COUNT,val)
+#define bfin_read_MDMA_D1_IRQ_STATUS() bfin_read16(MDMA_D1_IRQ_STATUS)
+#define bfin_write_MDMA_D1_IRQ_STATUS(val) bfin_write16(MDMA_D1_IRQ_STATUS,val)
+#define bfin_read_MDMA_D1_PERIPHERAL_MAP() bfin_read16(MDMA_D1_PERIPHERAL_MAP)
+#define bfin_write_MDMA_D1_PERIPHERAL_MAP(val) bfin_write16(MDMA_D1_PERIPHERAL_MAP,val)
+
+#define bfin_read_MDMA_S1_CONFIG() bfin_read16(MDMA_S1_CONFIG)
+#define bfin_write_MDMA_S1_CONFIG(val) bfin_write16(MDMA_S1_CONFIG,val)
+#define bfin_read_MDMA_S1_NEXT_DESC_PTR() bfin_read32(MDMA_S1_NEXT_DESC_PTR)
+#define bfin_write_MDMA_S1_NEXT_DESC_PTR(val) bfin_write32(MDMA_S1_NEXT_DESC_PTR,val)
+#define bfin_read_MDMA_S1_START_ADDR() bfin_read32(MDMA_S1_START_ADDR)
+#define bfin_write_MDMA_S1_START_ADDR(val) bfin_write32(MDMA_S1_START_ADDR,val)
+#define bfin_read_MDMA_S1_X_COUNT() bfin_read16(MDMA_S1_X_COUNT)
+#define bfin_write_MDMA_S1_X_COUNT(val) bfin_write16(MDMA_S1_X_COUNT,val)
+#define bfin_read_MDMA_S1_Y_COUNT() bfin_read16(MDMA_S1_Y_COUNT)
+#define bfin_write_MDMA_S1_Y_COUNT(val) bfin_write16(MDMA_S1_Y_COUNT,val)
+#define bfin_read_MDMA_S1_X_MODIFY() bfin_read16(MDMA_S1_X_MODIFY)
+#define bfin_write_MDMA_S1_X_MODIFY(val) bfin_write16(MDMA_S1_X_MODIFY,val)
+#define bfin_read_MDMA_S1_Y_MODIFY() bfin_read16(MDMA_S1_Y_MODIFY)
+#define bfin_write_MDMA_S1_Y_MODIFY(val) bfin_write16(MDMA_S1_Y_MODIFY,val)
+#define bfin_read_MDMA_S1_CURR_DESC_PTR() bfin_read32(MDMA_S1_CURR_DESC_PTR)
+#define bfin_write_MDMA_S1_CURR_DESC_PTR(val) bfin_write32(MDMA_S1_CURR_DESC_PTR,val)
+#define bfin_read_MDMA_S1_CURR_ADDR() bfin_read32(MDMA_S1_CURR_ADDR)
+#define bfin_write_MDMA_S1_CURR_ADDR(val) bfin_write32(MDMA_S1_CURR_ADDR,val)
+#define bfin_read_MDMA_S1_CURR_X_COUNT() bfin_read16(MDMA_S1_CURR_X_COUNT)
+#define bfin_write_MDMA_S1_CURR_X_COUNT(val) bfin_write16(MDMA_S1_CURR_X_COUNT,val)
+#define bfin_read_MDMA_S1_CURR_Y_COUNT() bfin_read16(MDMA_S1_CURR_Y_COUNT)
+#define bfin_write_MDMA_S1_CURR_Y_COUNT(val) bfin_write16(MDMA_S1_CURR_Y_COUNT,val)
+#define bfin_read_MDMA_S1_IRQ_STATUS() bfin_read16(MDMA_S1_IRQ_STATUS)
+#define bfin_write_MDMA_S1_IRQ_STATUS(val) bfin_write16(MDMA_S1_IRQ_STATUS,val)
+#define bfin_read_MDMA_S1_PERIPHERAL_MAP() bfin_read16(MDMA_S1_PERIPHERAL_MAP)
+#define bfin_write_MDMA_S1_PERIPHERAL_MAP(val) bfin_write16(MDMA_S1_PERIPHERAL_MAP,val)
+
+/* Parallel Peripheral Interface (0xFFC01000 - 0xFFC010FF) */
+#define bfin_read_PPI_CONTROL() bfin_read16(PPI_CONTROL)
+#define bfin_write_PPI_CONTROL(val) bfin_write16(PPI_CONTROL,val)
+#define bfin_read_PPI_STATUS() bfin_read16(PPI_STATUS)
+#define bfin_write_PPI_STATUS(val) bfin_write16(PPI_STATUS,val)
+#define bfin_clear_PPI_STATUS() bfin_write_PPI_STATUS(0xFFFF)
+#define bfin_read_PPI_DELAY() bfin_read16(PPI_DELAY)
+#define bfin_write_PPI_DELAY(val) bfin_write16(PPI_DELAY,val)
+#define bfin_read_PPI_COUNT() bfin_read16(PPI_COUNT)
+#define bfin_write_PPI_COUNT(val) bfin_write16(PPI_COUNT,val)
+#define bfin_read_PPI_FRAME() bfin_read16(PPI_FRAME)
+#define bfin_write_PPI_FRAME(val) bfin_write16(PPI_FRAME,val)
+
+/* Two-Wire Interface (0xFFC01400 - 0xFFC014FF) */
+#define bfin_read_TWI_CLKDIV() bfin_read16(TWI_CLKDIV)
+#define bfin_write_TWI_CLKDIV(val) bfin_write16(TWI_CLKDIV,val)
+#define bfin_read_TWI_CONTROL() bfin_read16(TWI_CONTROL)
+#define bfin_write_TWI_CONTROL(val) bfin_write16(TWI_CONTROL,val)
+#define bfin_read_TWI_SLAVE_CTL() bfin_read16(TWI_SLAVE_CTL)
+#define bfin_write_TWI_SLAVE_CTL(val) bfin_write16(TWI_SLAVE_CTL,val)
+#define bfin_read_TWI_SLAVE_STAT() bfin_read16(TWI_SLAVE_STAT)
+#define bfin_write_TWI_SLAVE_STAT(val) bfin_write16(TWI_SLAVE_STAT,val)
+#define bfin_read_TWI_SLAVE_ADDR() bfin_read16(TWI_SLAVE_ADDR)
+#define bfin_write_TWI_SLAVE_ADDR(val) bfin_write16(TWI_SLAVE_ADDR,val)
+#define bfin_read_TWI_MASTER_CTL() bfin_read16(TWI_MASTER_CTL)
+#define bfin_write_TWI_MASTER_CTL(val) bfin_write16(TWI_MASTER_CTL,val)
+#define bfin_read_TWI_MASTER_STAT() bfin_read16(TWI_MASTER_STAT)
+#define bfin_write_TWI_MASTER_STAT(val) bfin_write16(TWI_MASTER_STAT,val)
+#define bfin_read_TWI_MASTER_ADDR() bfin_read16(TWI_MASTER_ADDR)
+#define bfin_write_TWI_MASTER_ADDR(val) bfin_write16(TWI_MASTER_ADDR,val)
+#define bfin_read_TWI_INT_STAT() bfin_read16(TWI_INT_STAT)
+#define bfin_write_TWI_INT_STAT(val) bfin_write16(TWI_INT_STAT,val)
+#define bfin_read_TWI_INT_MASK() bfin_read16(TWI_INT_MASK)
+#define bfin_write_TWI_INT_MASK(val) bfin_write16(TWI_INT_MASK,val)
+#define bfin_read_TWI_FIFO_CTL() bfin_read16(TWI_FIFO_CTL)
+#define bfin_write_TWI_FIFO_CTL(val) bfin_write16(TWI_FIFO_CTL,val)
+#define bfin_read_TWI_FIFO_STAT() bfin_read16(TWI_FIFO_STAT)
+#define bfin_write_TWI_FIFO_STAT(val) bfin_write16(TWI_FIFO_STAT,val)
+#define bfin_read_TWI_XMT_DATA8() bfin_read16(TWI_XMT_DATA8)
+#define bfin_write_TWI_XMT_DATA8(val) bfin_write16(TWI_XMT_DATA8,val)
+#define bfin_read_TWI_XMT_DATA16() bfin_read16(TWI_XMT_DATA16)
+#define bfin_write_TWI_XMT_DATA16(val) bfin_write16(TWI_XMT_DATA16,val)
+#define bfin_read_TWI_RCV_DATA8() bfin_read16(TWI_RCV_DATA8)
+#define bfin_write_TWI_RCV_DATA8(val) bfin_write16(TWI_RCV_DATA8,val)
+#define bfin_read_TWI_RCV_DATA16() bfin_read16(TWI_RCV_DATA16)
+#define bfin_write_TWI_RCV_DATA16(val) bfin_write16(TWI_RCV_DATA16,val)
+
+/* General Purpose I/O Port G (0xFFC01500 - 0xFFC015FF) */
+#define bfin_read_PORTGIO() bfin_read16(PORTGIO)
+#define bfin_write_PORTGIO(val) bfin_write16(PORTGIO,val)
+#define bfin_read_PORTGIO_CLEAR() bfin_read16(PORTGIO_CLEAR)
+#define bfin_write_PORTGIO_CLEAR(val) bfin_write16(PORTGIO_CLEAR,val)
+#define bfin_read_PORTGIO_SET() bfin_read16(PORTGIO_SET)
+#define bfin_write_PORTGIO_SET(val) bfin_write16(PORTGIO_SET,val)
+#define bfin_read_PORTGIO_TOGGLE() bfin_read16(PORTGIO_TOGGLE)
+#define bfin_write_PORTGIO_TOGGLE(val) bfin_write16(PORTGIO_TOGGLE,val)
+#define bfin_read_PORTGIO_MASKA() bfin_read16(PORTGIO_MASKA)
+#define bfin_write_PORTGIO_MASKA(val) bfin_write16(PORTGIO_MASKA,val)
+#define bfin_read_PORTGIO_MASKA_CLEAR() bfin_read16(PORTGIO_MASKA_CLEAR)
+#define bfin_write_PORTGIO_MASKA_CLEAR(val) bfin_write16(PORTGIO_MASKA_CLEAR,val)
+#define bfin_read_PORTGIO_MASKA_SET() bfin_read16(PORTGIO_MASKA_SET)
+#define bfin_write_PORTGIO_MASKA_SET(val) bfin_write16(PORTGIO_MASKA_SET,val)
+#define bfin_read_PORTGIO_MASKA_TOGGLE() bfin_read16(PORTGIO_MASKA_TOGGLE)
+#define bfin_write_PORTGIO_MASKA_TOGGLE(val) bfin_write16(PORTGIO_MASKA_TOGGLE,val)
+#define bfin_read_PORTGIO_MASKB() bfin_read16(PORTGIO_MASKB)
+#define bfin_write_PORTGIO_MASKB(val) bfin_write16(PORTGIO_MASKB,val)
+#define bfin_read_PORTGIO_MASKB_CLEAR() bfin_read16(PORTGIO_MASKB_CLEAR)
+#define bfin_write_PORTGIO_MASKB_CLEAR(val) bfin_write16(PORTGIO_MASKB_CLEAR,val)
+#define bfin_read_PORTGIO_MASKB_SET() bfin_read16(PORTGIO_MASKB_SET)
+#define bfin_write_PORTGIO_MASKB_SET(val) bfin_write16(PORTGIO_MASKB_SET,val)
+#define bfin_read_PORTGIO_MASKB_TOGGLE() bfin_read16(PORTGIO_MASKB_TOGGLE)
+#define bfin_write_PORTGIO_MASKB_TOGGLE(val) bfin_write16(PORTGIO_MASKB_TOGGLE,val)
+#define bfin_read_PORTGIO_DIR() bfin_read16(PORTGIO_DIR)
+#define bfin_write_PORTGIO_DIR(val) bfin_write16(PORTGIO_DIR,val)
+#define bfin_read_PORTGIO_POLAR() bfin_read16(PORTGIO_POLAR)
+#define bfin_write_PORTGIO_POLAR(val) bfin_write16(PORTGIO_POLAR,val)
+#define bfin_read_PORTGIO_EDGE() bfin_read16(PORTGIO_EDGE)
+#define bfin_write_PORTGIO_EDGE(val) bfin_write16(PORTGIO_EDGE,val)
+#define bfin_read_PORTGIO_BOTH() bfin_read16(PORTGIO_BOTH)
+#define bfin_write_PORTGIO_BOTH(val) bfin_write16(PORTGIO_BOTH,val)
+#define bfin_read_PORTGIO_INEN() bfin_read16(PORTGIO_INEN)
+#define bfin_write_PORTGIO_INEN(val) bfin_write16(PORTGIO_INEN,val)
+
+/* General Purpose I/O Port H (0xFFC01700 - 0xFFC017FF) */
+#define bfin_read_PORTHIO() bfin_read16(PORTHIO)
+#define bfin_write_PORTHIO(val) bfin_write16(PORTHIO,val)
+#define bfin_read_PORTHIO_CLEAR() bfin_read16(PORTHIO_CLEAR)
+#define bfin_write_PORTHIO_CLEAR(val) bfin_write16(PORTHIO_CLEAR,val)
+#define bfin_read_PORTHIO_SET() bfin_read16(PORTHIO_SET)
+#define bfin_write_PORTHIO_SET(val) bfin_write16(PORTHIO_SET,val)
+#define bfin_read_PORTHIO_TOGGLE() bfin_read16(PORTHIO_TOGGLE)
+#define bfin_write_PORTHIO_TOGGLE(val) bfin_write16(PORTHIO_TOGGLE,val)
+#define bfin_read_PORTHIO_MASKA() bfin_read16(PORTHIO_MASKA)
+#define bfin_write_PORTHIO_MASKA(val) bfin_write16(PORTHIO_MASKA,val)
+#define bfin_read_PORTHIO_MASKA_CLEAR() bfin_read16(PORTHIO_MASKA_CLEAR)
+#define bfin_write_PORTHIO_MASKA_CLEAR(val) bfin_write16(PORTHIO_MASKA_CLEAR,val)
+#define bfin_read_PORTHIO_MASKA_SET() bfin_read16(PORTHIO_MASKA_SET)
+#define bfin_write_PORTHIO_MASKA_SET(val) bfin_write16(PORTHIO_MASKA_SET,val)
+#define bfin_read_PORTHIO_MASKA_TOGGLE() bfin_read16(PORTHIO_MASKA_TOGGLE)
+#define bfin_write_PORTHIO_MASKA_TOGGLE(val) bfin_write16(PORTHIO_MASKA_TOGGLE,val)
+#define bfin_read_PORTHIO_MASKB() bfin_read16(PORTHIO_MASKB)
+#define bfin_write_PORTHIO_MASKB(val) bfin_write16(PORTHIO_MASKB,val)
+#define bfin_read_PORTHIO_MASKB_CLEAR() bfin_read16(PORTHIO_MASKB_CLEAR)
+#define bfin_write_PORTHIO_MASKB_CLEAR(val) bfin_write16(PORTHIO_MASKB_CLEAR,val)
+#define bfin_read_PORTHIO_MASKB_SET() bfin_read16(PORTHIO_MASKB_SET)
+#define bfin_write_PORTHIO_MASKB_SET(val) bfin_write16(PORTHIO_MASKB_SET,val)
+#define bfin_read_PORTHIO_MASKB_TOGGLE() bfin_read16(PORTHIO_MASKB_TOGGLE)
+#define bfin_write_PORTHIO_MASKB_TOGGLE(val) bfin_write16(PORTHIO_MASKB_TOGGLE,val)
+#define bfin_read_PORTHIO_DIR() bfin_read16(PORTHIO_DIR)
+#define bfin_write_PORTHIO_DIR(val) bfin_write16(PORTHIO_DIR,val)
+#define bfin_read_PORTHIO_POLAR() bfin_read16(PORTHIO_POLAR)
+#define bfin_write_PORTHIO_POLAR(val) bfin_write16(PORTHIO_POLAR,val)
+#define bfin_read_PORTHIO_EDGE() bfin_read16(PORTHIO_EDGE)
+#define bfin_write_PORTHIO_EDGE(val) bfin_write16(PORTHIO_EDGE,val)
+#define bfin_read_PORTHIO_BOTH() bfin_read16(PORTHIO_BOTH)
+#define bfin_write_PORTHIO_BOTH(val) bfin_write16(PORTHIO_BOTH,val)
+#define bfin_read_PORTHIO_INEN() bfin_read16(PORTHIO_INEN)
+#define bfin_write_PORTHIO_INEN(val) bfin_write16(PORTHIO_INEN,val)
+
+/* UART1 Controller (0xFFC02000 - 0xFFC020FF) */
+#define bfin_read_UART1_THR() bfin_read16(UART1_THR)
+#define bfin_write_UART1_THR(val) bfin_write16(UART1_THR,val)
+#define bfin_read_UART1_RBR() bfin_read16(UART1_RBR)
+#define bfin_write_UART1_RBR(val) bfin_write16(UART1_RBR,val)
+#define bfin_read_UART1_DLL() bfin_read16(UART1_DLL)
+#define bfin_write_UART1_DLL(val) bfin_write16(UART1_DLL,val)
+#define bfin_read_UART1_IER() bfin_read16(UART1_IER)
+#define bfin_write_UART1_IER(val) bfin_write16(UART1_IER,val)
+#define bfin_read_UART1_DLH() bfin_read16(UART1_DLH)
+#define bfin_write_UART1_DLH(val) bfin_write16(UART1_DLH,val)
+#define bfin_read_UART1_IIR() bfin_read16(UART1_IIR)
+#define bfin_write_UART1_IIR(val) bfin_write16(UART1_IIR,val)
+#define bfin_read_UART1_LCR() bfin_read16(UART1_LCR)
+#define bfin_write_UART1_LCR(val) bfin_write16(UART1_LCR,val)
+#define bfin_read_UART1_MCR() bfin_read16(UART1_MCR)
+#define bfin_write_UART1_MCR(val) bfin_write16(UART1_MCR,val)
+#define bfin_read_UART1_LSR() bfin_read16(UART1_LSR)
+#define bfin_write_UART1_LSR(val) bfin_write16(UART1_LSR,val)
+#define bfin_read_UART1_MSR() bfin_read16(UART1_MSR)
+#define bfin_write_UART1_MSR(val) bfin_write16(UART1_MSR,val)
+#define bfin_read_UART1_SCR() bfin_read16(UART1_SCR)
+#define bfin_write_UART1_SCR(val) bfin_write16(UART1_SCR,val)
+#define bfin_read_UART1_GCTL() bfin_read16(UART1_GCTL)
+#define bfin_write_UART1_GCTL(val) bfin_write16(UART1_GCTL,val)
+
+/* CAN Controller (0xFFC02A00 - 0xFFC02FFF) */
+/* For Mailboxes 0-15 */
+#define bfin_read_CAN_MC1() bfin_read16(CAN_MC1)
+#define bfin_write_CAN_MC1(val) bfin_write16(CAN_MC1,val)
+#define bfin_read_CAN_MD1() bfin_read16(CAN_MD1)
+#define bfin_write_CAN_MD1(val) bfin_write16(CAN_MD1,val)
+#define bfin_read_CAN_TRS1() bfin_read16(CAN_TRS1)
+#define bfin_write_CAN_TRS1(val) bfin_write16(CAN_TRS1,val)
+#define bfin_read_CAN_TRR1() bfin_read16(CAN_TRR1)
+#define bfin_write_CAN_TRR1(val) bfin_write16(CAN_TRR1,val)
+#define bfin_read_CAN_TA1() bfin_read16(CAN_TA1)
+#define bfin_write_CAN_TA1(val) bfin_write16(CAN_TA1,val)
+#define bfin_read_CAN_AA1() bfin_read16(CAN_AA1)
+#define bfin_write_CAN_AA1(val) bfin_write16(CAN_AA1,val)
+#define bfin_read_CAN_RMP1() bfin_read16(CAN_RMP1)
+#define bfin_write_CAN_RMP1(val) bfin_write16(CAN_RMP1,val)
+#define bfin_read_CAN_RML1() bfin_read16(CAN_RML1)
+#define bfin_write_CAN_RML1(val) bfin_write16(CAN_RML1,val)
+#define bfin_read_CAN_MBTIF1() bfin_read16(CAN_MBTIF1)
+#define bfin_write_CAN_MBTIF1(val) bfin_write16(CAN_MBTIF1,val)
+#define bfin_read_CAN_MBRIF1() bfin_read16(CAN_MBRIF1)
+#define bfin_write_CAN_MBRIF1(val) bfin_write16(CAN_MBRIF1,val)
+#define bfin_read_CAN_MBIM1() bfin_read16(CAN_MBIM1)
+#define bfin_write_CAN_MBIM1(val) bfin_write16(CAN_MBIM1,val)
+#define bfin_read_CAN_RFH1() bfin_read16(CAN_RFH1)
+#define bfin_write_CAN_RFH1(val) bfin_write16(CAN_RFH1,val)
+#define bfin_read_CAN_OPSS1() bfin_read16(CAN_OPSS1)
+#define bfin_write_CAN_OPSS1(val) bfin_write16(CAN_OPSS1,val)
+
+/* For Mailboxes 16-31 */
+#define bfin_read_CAN_MC2() bfin_read16(CAN_MC2)
+#define bfin_write_CAN_MC2(val) bfin_write16(CAN_MC2,val)
+#define bfin_read_CAN_MD2() bfin_read16(CAN_MD2)
+#define bfin_write_CAN_MD2(val) bfin_write16(CAN_MD2,val)
+#define bfin_read_CAN_TRS2() bfin_read16(CAN_TRS2)
+#define bfin_write_CAN_TRS2(val) bfin_write16(CAN_TRS2,val)
+#define bfin_read_CAN_TRR2() bfin_read16(CAN_TRR2)
+#define bfin_write_CAN_TRR2(val) bfin_write16(CAN_TRR2,val)
+#define bfin_read_CAN_TA2() bfin_read16(CAN_TA2)
+#define bfin_write_CAN_TA2(val) bfin_write16(CAN_TA2,val)
+#define bfin_read_CAN_AA2() bfin_read16(CAN_AA2)
+#define bfin_write_CAN_AA2(val) bfin_write16(CAN_AA2,val)
+#define bfin_read_CAN_RMP2() bfin_read16(CAN_RMP2)
+#define bfin_write_CAN_RMP2(val) bfin_write16(CAN_RMP2,val)
+#define bfin_read_CAN_RML2() bfin_read16(CAN_RML2)
+#define bfin_write_CAN_RML2(val) bfin_write16(CAN_RML2,val)
+#define bfin_read_CAN_MBTIF2() bfin_read16(CAN_MBTIF2)
+#define bfin_write_CAN_MBTIF2(val) bfin_write16(CAN_MBTIF2,val)
+#define bfin_read_CAN_MBRIF2() bfin_read16(CAN_MBRIF2)
+#define bfin_write_CAN_MBRIF2(val) bfin_write16(CAN_MBRIF2,val)
+#define bfin_read_CAN_MBIM2() bfin_read16(CAN_MBIM2)
+#define bfin_write_CAN_MBIM2(val) bfin_write16(CAN_MBIM2,val)
+#define bfin_read_CAN_RFH2() bfin_read16(CAN_RFH2)
+#define bfin_write_CAN_RFH2(val) bfin_write16(CAN_RFH2,val)
+#define bfin_read_CAN_OPSS2() bfin_read16(CAN_OPSS2)
+#define bfin_write_CAN_OPSS2(val) bfin_write16(CAN_OPSS2,val)
+
+#define bfin_read_CAN_CLOCK() bfin_read16(CAN_CLOCK)
+#define bfin_write_CAN_CLOCK(val) bfin_write16(CAN_CLOCK,val)
+#define bfin_read_CAN_TIMING() bfin_read16(CAN_TIMING)
+#define bfin_write_CAN_TIMING(val) bfin_write16(CAN_TIMING,val)
+#define bfin_read_CAN_DEBUG() bfin_read16(CAN_DEBUG)
+#define bfin_write_CAN_DEBUG(val) bfin_write16(CAN_DEBUG,val)
+#define bfin_read_CAN_STATUS() bfin_read16(CAN_STATUS)
+#define bfin_write_CAN_STATUS(val) bfin_write16(CAN_STATUS,val)
+#define bfin_read_CAN_CEC() bfin_read16(CAN_CEC)
+#define bfin_write_CAN_CEC(val) bfin_write16(CAN_CEC,val)
+#define bfin_read_CAN_GIS() bfin_read16(CAN_GIS)
+#define bfin_write_CAN_GIS(val) bfin_write16(CAN_GIS,val)
+#define bfin_read_CAN_GIM() bfin_read16(CAN_GIM)
+#define bfin_write_CAN_GIM(val) bfin_write16(CAN_GIM,val)
+#define bfin_read_CAN_GIF() bfin_read16(CAN_GIF)
+#define bfin_write_CAN_GIF(val) bfin_write16(CAN_GIF,val)
+#define bfin_read_CAN_CONTROL() bfin_read16(CAN_CONTROL)
+#define bfin_write_CAN_CONTROL(val) bfin_write16(CAN_CONTROL,val)
+#define bfin_read_CAN_INTR() bfin_read16(CAN_INTR)
+#define bfin_write_CAN_INTR(val) bfin_write16(CAN_INTR,val)
+#define bfin_read_CAN_SFCMVER() bfin_read16(CAN_SFCMVER)
+#define bfin_write_CAN_SFCMVER(val) bfin_write16(CAN_SFCMVER,val)
+#define bfin_read_CAN_MBTD() bfin_read16(CAN_MBTD)
+#define bfin_write_CAN_MBTD(val) bfin_write16(CAN_MBTD,val)
+#define bfin_read_CAN_EWR() bfin_read16(CAN_EWR)
+#define bfin_write_CAN_EWR(val) bfin_write16(CAN_EWR,val)
+#define bfin_read_CAN_ESR() bfin_read16(CAN_ESR)
+#define bfin_write_CAN_ESR(val) bfin_write16(CAN_ESR,val)
+#define bfin_read_CAN_UCREG() bfin_read16(CAN_UCREG)
+#define bfin_write_CAN_UCREG(val) bfin_write16(CAN_UCREG,val)
+#define bfin_read_CAN_UCCNT() bfin_read16(CAN_UCCNT)
+#define bfin_write_CAN_UCCNT(val) bfin_write16(CAN_UCCNT,val)
+#define bfin_read_CAN_UCRC() bfin_read16(CAN_UCRC)
+#define bfin_write_CAN_UCRC(val) bfin_write16(CAN_UCRC,val)
+#define bfin_read_CAN_UCCNF() bfin_read16(CAN_UCCNF)
+#define bfin_write_CAN_UCCNF(val) bfin_write16(CAN_UCCNF,val)
+#define bfin_read_CAN_SFCMVER2() bfin_read16(CAN_SFCMVER2)
+#define bfin_write_CAN_SFCMVER2(val) bfin_write16(CAN_SFCMVER2,val)
+
+/* Mailbox Acceptance Masks */
+#define bfin_read_CAN_AM00L() bfin_read16(CAN_AM00L)
+#define bfin_write_CAN_AM00L(val) bfin_write16(CAN_AM00L,val)
+#define bfin_read_CAN_AM00H() bfin_read16(CAN_AM00H)
+#define bfin_write_CAN_AM00H(val) bfin_write16(CAN_AM00H,val)
+#define bfin_read_CAN_AM01L() bfin_read16(CAN_AM01L)
+#define bfin_write_CAN_AM01L(val) bfin_write16(CAN_AM01L,val)
+#define bfin_read_CAN_AM01H() bfin_read16(CAN_AM01H)
+#define bfin_write_CAN_AM01H(val) bfin_write16(CAN_AM01H,val)
+#define bfin_read_CAN_AM02L() bfin_read16(CAN_AM02L)
+#define bfin_write_CAN_AM02L(val) bfin_write16(CAN_AM02L,val)
+#define bfin_read_CAN_AM02H() bfin_read16(CAN_AM02H)
+#define bfin_write_CAN_AM02H(val) bfin_write16(CAN_AM02H,val)
+#define bfin_read_CAN_AM03L() bfin_read16(CAN_AM03L)
+#define bfin_write_CAN_AM03L(val) bfin_write16(CAN_AM03L,val)
+#define bfin_read_CAN_AM03H() bfin_read16(CAN_AM03H)
+#define bfin_write_CAN_AM03H(val) bfin_write16(CAN_AM03H,val)
+#define bfin_read_CAN_AM04L() bfin_read16(CAN_AM04L)
+#define bfin_write_CAN_AM04L(val) bfin_write16(CAN_AM04L,val)
+#define bfin_read_CAN_AM04H() bfin_read16(CAN_AM04H)
+#define bfin_write_CAN_AM04H(val) bfin_write16(CAN_AM04H,val)
+#define bfin_read_CAN_AM05L() bfin_read16(CAN_AM05L)
+#define bfin_write_CAN_AM05L(val) bfin_write16(CAN_AM05L,val)
+#define bfin_read_CAN_AM05H() bfin_read16(CAN_AM05H)
+#define bfin_write_CAN_AM05H(val) bfin_write16(CAN_AM05H,val)
+#define bfin_read_CAN_AM06L() bfin_read16(CAN_AM06L)
+#define bfin_write_CAN_AM06L(val) bfin_write16(CAN_AM06L,val)
+#define bfin_read_CAN_AM06H() bfin_read16(CAN_AM06H)
+#define bfin_write_CAN_AM06H(val) bfin_write16(CAN_AM06H,val)
+#define bfin_read_CAN_AM07L() bfin_read16(CAN_AM07L)
+#define bfin_write_CAN_AM07L(val) bfin_write16(CAN_AM07L,val)
+#define bfin_read_CAN_AM07H() bfin_read16(CAN_AM07H)
+#define bfin_write_CAN_AM07H(val) bfin_write16(CAN_AM07H,val)
+#define bfin_read_CAN_AM08L() bfin_read16(CAN_AM08L)
+#define bfin_write_CAN_AM08L(val) bfin_write16(CAN_AM08L,val)
+#define bfin_read_CAN_AM08H() bfin_read16(CAN_AM08H)
+#define bfin_write_CAN_AM08H(val) bfin_write16(CAN_AM08H,val)
+#define bfin_read_CAN_AM09L() bfin_read16(CAN_AM09L)
+#define bfin_write_CAN_AM09L(val) bfin_write16(CAN_AM09L,val)
+#define bfin_read_CAN_AM09H() bfin_read16(CAN_AM09H)
+#define bfin_write_CAN_AM09H(val) bfin_write16(CAN_AM09H,val)
+#define bfin_read_CAN_AM10L() bfin_read16(CAN_AM10L)
+#define bfin_write_CAN_AM10L(val) bfin_write16(CAN_AM10L,val)
+#define bfin_read_CAN_AM10H() bfin_read16(CAN_AM10H)
+#define bfin_write_CAN_AM10H(val) bfin_write16(CAN_AM10H,val)
+#define bfin_read_CAN_AM11L() bfin_read16(CAN_AM11L)
+#define bfin_write_CAN_AM11L(val) bfin_write16(CAN_AM11L,val)
+#define bfin_read_CAN_AM11H() bfin_read16(CAN_AM11H)
+#define bfin_write_CAN_AM11H(val) bfin_write16(CAN_AM11H,val)
+#define bfin_read_CAN_AM12L() bfin_read16(CAN_AM12L)
+#define bfin_write_CAN_AM12L(val) bfin_write16(CAN_AM12L,val)
+#define bfin_read_CAN_AM12H() bfin_read16(CAN_AM12H)
+#define bfin_write_CAN_AM12H(val) bfin_write16(CAN_AM12H,val)
+#define bfin_read_CAN_AM13L() bfin_read16(CAN_AM13L)
+#define bfin_write_CAN_AM13L(val) bfin_write16(CAN_AM13L,val)
+#define bfin_read_CAN_AM13H() bfin_read16(CAN_AM13H)
+#define bfin_write_CAN_AM13H(val) bfin_write16(CAN_AM13H,val)
+#define bfin_read_CAN_AM14L() bfin_read16(CAN_AM14L)
+#define bfin_write_CAN_AM14L(val) bfin_write16(CAN_AM14L,val)
+#define bfin_read_CAN_AM14H() bfin_read16(CAN_AM14H)
+#define bfin_write_CAN_AM14H(val) bfin_write16(CAN_AM14H,val)
+#define bfin_read_CAN_AM15L() bfin_read16(CAN_AM15L)
+#define bfin_write_CAN_AM15L(val) bfin_write16(CAN_AM15L,val)
+#define bfin_read_CAN_AM15H() bfin_read16(CAN_AM15H)
+#define bfin_write_CAN_AM15H(val) bfin_write16(CAN_AM15H,val)
+
+#define bfin_read_CAN_AM16L() bfin_read16(CAN_AM16L)
+#define bfin_write_CAN_AM16L(val) bfin_write16(CAN_AM16L,val)
+#define bfin_read_CAN_AM16H() bfin_read16(CAN_AM16H)
+#define bfin_write_CAN_AM16H(val) bfin_write16(CAN_AM16H,val)
+#define bfin_read_CAN_AM17L() bfin_read16(CAN_AM17L)
+#define bfin_write_CAN_AM17L(val) bfin_write16(CAN_AM17L,val)
+#define bfin_read_CAN_AM17H() bfin_read16(CAN_AM17H)
+#define bfin_write_CAN_AM17H(val) bfin_write16(CAN_AM17H,val)
+#define bfin_read_CAN_AM18L() bfin_read16(CAN_AM18L)
+#define bfin_write_CAN_AM18L(val) bfin_write16(CAN_AM18L,val)
+#define bfin_read_CAN_AM18H() bfin_read16(CAN_AM18H)
+#define bfin_write_CAN_AM18H(val) bfin_write16(CAN_AM18H,val)
+#define bfin_read_CAN_AM19L() bfin_read16(CAN_AM19L)
+#define bfin_write_CAN_AM19L(val) bfin_write16(CAN_AM19L,val)
+#define bfin_read_CAN_AM19H() bfin_read16(CAN_AM19H)
+#define bfin_write_CAN_AM19H(val) bfin_write16(CAN_AM19H,val)
+#define bfin_read_CAN_AM20L() bfin_read16(CAN_AM20L)
+#define bfin_write_CAN_AM20L(val) bfin_write16(CAN_AM20L,val)
+#define bfin_read_CAN_AM20H() bfin_read16(CAN_AM20H)
+#define bfin_write_CAN_AM20H(val) bfin_write16(CAN_AM20H,val)
+#define bfin_read_CAN_AM21L() bfin_read16(CAN_AM21L)
+#define bfin_write_CAN_AM21L(val) bfin_write16(CAN_AM21L,val)
+#define bfin_read_CAN_AM21H() bfin_read16(CAN_AM21H)
+#define bfin_write_CAN_AM21H(val) bfin_write16(CAN_AM21H,val)
+#define bfin_read_CAN_AM22L() bfin_read16(CAN_AM22L)
+#define bfin_write_CAN_AM22L(val) bfin_write16(CAN_AM22L,val)
+#define bfin_read_CAN_AM22H() bfin_read16(CAN_AM22H)
+#define bfin_write_CAN_AM22H(val) bfin_write16(CAN_AM22H,val)
+#define bfin_read_CAN_AM23L() bfin_read16(CAN_AM23L)
+#define bfin_write_CAN_AM23L(val) bfin_write16(CAN_AM23L,val)
+#define bfin_read_CAN_AM23H() bfin_read16(CAN_AM23H)
+#define bfin_write_CAN_AM23H(val) bfin_write16(CAN_AM23H,val)
+#define bfin_read_CAN_AM24L() bfin_read16(CAN_AM24L)
+#define bfin_write_CAN_AM24L(val) bfin_write16(CAN_AM24L,val)
+#define bfin_read_CAN_AM24H() bfin_read16(CAN_AM24H)
+#define bfin_write_CAN_AM24H(val) bfin_write16(CAN_AM24H,val)
+#define bfin_read_CAN_AM25L() bfin_read16(CAN_AM25L)
+#define bfin_write_CAN_AM25L(val) bfin_write16(CAN_AM25L,val)
+#define bfin_read_CAN_AM25H() bfin_read16(CAN_AM25H)
+#define bfin_write_CAN_AM25H(val) bfin_write16(CAN_AM25H,val)
+#define bfin_read_CAN_AM26L() bfin_read16(CAN_AM26L)
+#define bfin_write_CAN_AM26L(val) bfin_write16(CAN_AM26L,val)
+#define bfin_read_CAN_AM26H() bfin_read16(CAN_AM26H)
+#define bfin_write_CAN_AM26H(val) bfin_write16(CAN_AM26H,val)
+#define bfin_read_CAN_AM27L() bfin_read16(CAN_AM27L)
+#define bfin_write_CAN_AM27L(val) bfin_write16(CAN_AM27L,val)
+#define bfin_read_CAN_AM27H() bfin_read16(CAN_AM27H)
+#define bfin_write_CAN_AM27H(val) bfin_write16(CAN_AM27H,val)
+#define bfin_read_CAN_AM28L() bfin_read16(CAN_AM28L)
+#define bfin_write_CAN_AM28L(val) bfin_write16(CAN_AM28L,val)
+#define bfin_read_CAN_AM28H() bfin_read16(CAN_AM28H)
+#define bfin_write_CAN_AM28H(val) bfin_write16(CAN_AM28H,val)
+#define bfin_read_CAN_AM29L() bfin_read16(CAN_AM29L)
+#define bfin_write_CAN_AM29L(val) bfin_write16(CAN_AM29L,val)
+#define bfin_read_CAN_AM29H() bfin_read16(CAN_AM29H)
+#define bfin_write_CAN_AM29H(val) bfin_write16(CAN_AM29H,val)
+#define bfin_read_CAN_AM30L() bfin_read16(CAN_AM30L)
+#define bfin_write_CAN_AM30L(val) bfin_write16(CAN_AM30L,val)
+#define bfin_read_CAN_AM30H() bfin_read16(CAN_AM30H)
+#define bfin_write_CAN_AM30H(val) bfin_write16(CAN_AM30H,val)
+#define bfin_read_CAN_AM31L() bfin_read16(CAN_AM31L)
+#define bfin_write_CAN_AM31L(val) bfin_write16(CAN_AM31L,val)
+#define bfin_read_CAN_AM31H() bfin_read16(CAN_AM31H)
+#define bfin_write_CAN_AM31H(val) bfin_write16(CAN_AM31H,val)
+
+/* CAN Acceptance Mask Area Macros */
+#define bfin_read_CAN_AM_L(x)() bfin_read16(CAN_AM_L(x))
+#define bfin_write_CAN_AM_L(x)(val) bfin_write16(CAN_AM_L(x),val)
+#define bfin_read_CAN_AM_H(x)() bfin_read16(CAN_AM_H(x))
+#define bfin_write_CAN_AM_H(x)(val) bfin_write16(CAN_AM_H(x),val)
+
+/* Mailbox Registers */
+#define bfin_read_CAN_MB00_ID1() bfin_read16(CAN_MB00_ID1)
+#define bfin_write_CAN_MB00_ID1(val) bfin_write16(CAN_MB00_ID1,val)
+#define bfin_read_CAN_MB00_ID0() bfin_read16(CAN_MB00_ID0)
+#define bfin_write_CAN_MB00_ID0(val) bfin_write16(CAN_MB00_ID0,val)
+#define bfin_read_CAN_MB00_TIMESTAMP() bfin_read16(CAN_MB00_TIMESTAMP)
+#define bfin_write_CAN_MB00_TIMESTAMP(val) bfin_write16(CAN_MB00_TIMESTAMP,val)
+#define bfin_read_CAN_MB00_LENGTH() bfin_read16(CAN_MB00_LENGTH)
+#define bfin_write_CAN_MB00_LENGTH(val) bfin_write16(CAN_MB00_LENGTH,val)
+#define bfin_read_CAN_MB00_DATA3() bfin_read16(CAN_MB00_DATA3)
+#define bfin_write_CAN_MB00_DATA3(val) bfin_write16(CAN_MB00_DATA3,val)
+#define bfin_read_CAN_MB00_DATA2() bfin_read16(CAN_MB00_DATA2)
+#define bfin_write_CAN_MB00_DATA2(val) bfin_write16(CAN_MB00_DATA2,val)
+#define bfin_read_CAN_MB00_DATA1() bfin_read16(CAN_MB00_DATA1)
+#define bfin_write_CAN_MB00_DATA1(val) bfin_write16(CAN_MB00_DATA1,val)
+#define bfin_read_CAN_MB00_DATA0() bfin_read16(CAN_MB00_DATA0)
+#define bfin_write_CAN_MB00_DATA0(val) bfin_write16(CAN_MB00_DATA0,val)
+
+#define bfin_read_CAN_MB01_ID1() bfin_read16(CAN_MB01_ID1)
+#define bfin_write_CAN_MB01_ID1(val) bfin_write16(CAN_MB01_ID1,val)
+#define bfin_read_CAN_MB01_ID0() bfin_read16(CAN_MB01_ID0)
+#define bfin_write_CAN_MB01_ID0(val) bfin_write16(CAN_MB01_ID0,val)
+#define bfin_read_CAN_MB01_TIMESTAMP() bfin_read16(CAN_MB01_TIMESTAMP)
+#define bfin_write_CAN_MB01_TIMESTAMP(val) bfin_write16(CAN_MB01_TIMESTAMP,val)
+#define bfin_read_CAN_MB01_LENGTH() bfin_read16(CAN_MB01_LENGTH)
+#define bfin_write_CAN_MB01_LENGTH(val) bfin_write16(CAN_MB01_LENGTH,val)
+#define bfin_read_CAN_MB01_DATA3() bfin_read16(CAN_MB01_DATA3)
+#define bfin_write_CAN_MB01_DATA3(val) bfin_write16(CAN_MB01_DATA3,val)
+#define bfin_read_CAN_MB01_DATA2() bfin_read16(CAN_MB01_DATA2)
+#define bfin_write_CAN_MB01_DATA2(val) bfin_write16(CAN_MB01_DATA2,val)
+#define bfin_read_CAN_MB01_DATA1() bfin_read16(CAN_MB01_DATA1)
+#define bfin_write_CAN_MB01_DATA1(val) bfin_write16(CAN_MB01_DATA1,val)
+#define bfin_read_CAN_MB01_DATA0() bfin_read16(CAN_MB01_DATA0)
+#define bfin_write_CAN_MB01_DATA0(val) bfin_write16(CAN_MB01_DATA0,val)
+
+#define bfin_read_CAN_MB02_ID1() bfin_read16(CAN_MB02_ID1)
+#define bfin_write_CAN_MB02_ID1(val) bfin_write16(CAN_MB02_ID1,val)
+#define bfin_read_CAN_MB02_ID0() bfin_read16(CAN_MB02_ID0)
+#define bfin_write_CAN_MB02_ID0(val) bfin_write16(CAN_MB02_ID0,val)
+#define bfin_read_CAN_MB02_TIMESTAMP() bfin_read16(CAN_MB02_TIMESTAMP)
+#define bfin_write_CAN_MB02_TIMESTAMP(val) bfin_write16(CAN_MB02_TIMESTAMP,val)
+#define bfin_read_CAN_MB02_LENGTH() bfin_read16(CAN_MB02_LENGTH)
+#define bfin_write_CAN_MB02_LENGTH(val) bfin_write16(CAN_MB02_LENGTH,val)
+#define bfin_read_CAN_MB02_DATA3() bfin_read16(CAN_MB02_DATA3)
+#define bfin_write_CAN_MB02_DATA3(val) bfin_write16(CAN_MB02_DATA3,val)
+#define bfin_read_CAN_MB02_DATA2() bfin_read16(CAN_MB02_DATA2)
+#define bfin_write_CAN_MB02_DATA2(val) bfin_write16(CAN_MB02_DATA2,val)
+#define bfin_read_CAN_MB02_DATA1() bfin_read16(CAN_MB02_DATA1)
+#define bfin_write_CAN_MB02_DATA1(val) bfin_write16(CAN_MB02_DATA1,val)
+#define bfin_read_CAN_MB02_DATA0() bfin_read16(CAN_MB02_DATA0)
+#define bfin_write_CAN_MB02_DATA0(val) bfin_write16(CAN_MB02_DATA0,val)
+
+#define bfin_read_CAN_MB03_ID1() bfin_read16(CAN_MB03_ID1)
+#define bfin_write_CAN_MB03_ID1(val) bfin_write16(CAN_MB03_ID1,val)
+#define bfin_read_CAN_MB03_ID0() bfin_read16(CAN_MB03_ID0)
+#define bfin_write_CAN_MB03_ID0(val) bfin_write16(CAN_MB03_ID0,val)
+#define bfin_read_CAN_MB03_TIMESTAMP() bfin_read16(CAN_MB03_TIMESTAMP)
+#define bfin_write_CAN_MB03_TIMESTAMP(val) bfin_write16(CAN_MB03_TIMESTAMP,val)
+#define bfin_read_CAN_MB03_LENGTH() bfin_read16(CAN_MB03_LENGTH)
+#define bfin_write_CAN_MB03_LENGTH(val) bfin_write16(CAN_MB03_LENGTH,val)
+#define bfin_read_CAN_MB03_DATA3() bfin_read16(CAN_MB03_DATA3)
+#define bfin_write_CAN_MB03_DATA3(val) bfin_write16(CAN_MB03_DATA3,val)
+#define bfin_read_CAN_MB03_DATA2() bfin_read16(CAN_MB03_DATA2)
+#define bfin_write_CAN_MB03_DATA2(val) bfin_write16(CAN_MB03_DATA2,val)
+#define bfin_read_CAN_MB03_DATA1() bfin_read16(CAN_MB03_DATA1)
+#define bfin_write_CAN_MB03_DATA1(val) bfin_write16(CAN_MB03_DATA1,val)
+#define bfin_read_CAN_MB03_DATA0() bfin_read16(CAN_MB03_DATA0)
+#define bfin_write_CAN_MB03_DATA0(val) bfin_write16(CAN_MB03_DATA0,val)
+
+#define bfin_read_CAN_MB04_ID1() bfin_read16(CAN_MB04_ID1)
+#define bfin_write_CAN_MB04_ID1(val) bfin_write16(CAN_MB04_ID1,val)
+#define bfin_read_CAN_MB04_ID0() bfin_read16(CAN_MB04_ID0)
+#define bfin_write_CAN_MB04_ID0(val) bfin_write16(CAN_MB04_ID0,val)
+#define bfin_read_CAN_MB04_TIMESTAMP() bfin_read16(CAN_MB04_TIMESTAMP)
+#define bfin_write_CAN_MB04_TIMESTAMP(val) bfin_write16(CAN_MB04_TIMESTAMP,val)
+#define bfin_read_CAN_MB04_LENGTH() bfin_read16(CAN_MB04_LENGTH)
+#define bfin_write_CAN_MB04_LENGTH(val) bfin_write16(CAN_MB04_LENGTH,val)
+#define bfin_read_CAN_MB04_DATA3() bfin_read16(CAN_MB04_DATA3)
+#define bfin_write_CAN_MB04_DATA3(val) bfin_write16(CAN_MB04_DATA3,val)
+#define bfin_read_CAN_MB04_DATA2() bfin_read16(CAN_MB04_DATA2)
+#define bfin_write_CAN_MB04_DATA2(val) bfin_write16(CAN_MB04_DATA2,val)
+#define bfin_read_CAN_MB04_DATA1() bfin_read16(CAN_MB04_DATA1)
+#define bfin_write_CAN_MB04_DATA1(val) bfin_write16(CAN_MB04_DATA1,val)
+#define bfin_read_CAN_MB04_DATA0() bfin_read16(CAN_MB04_DATA0)
+#define bfin_write_CAN_MB04_DATA0(val) bfin_write16(CAN_MB04_DATA0,val)
+
+#define bfin_read_CAN_MB05_ID1() bfin_read16(CAN_MB05_ID1)
+#define bfin_write_CAN_MB05_ID1(val) bfin_write16(CAN_MB05_ID1,val)
+#define bfin_read_CAN_MB05_ID0() bfin_read16(CAN_MB05_ID0)
+#define bfin_write_CAN_MB05_ID0(val) bfin_write16(CAN_MB05_ID0,val)
+#define bfin_read_CAN_MB05_TIMESTAMP() bfin_read16(CAN_MB05_TIMESTAMP)
+#define bfin_write_CAN_MB05_TIMESTAMP(val) bfin_write16(CAN_MB05_TIMESTAMP,val)
+#define bfin_read_CAN_MB05_LENGTH() bfin_read16(CAN_MB05_LENGTH)
+#define bfin_write_CAN_MB05_LENGTH(val) bfin_write16(CAN_MB05_LENGTH,val)
+#define bfin_read_CAN_MB05_DATA3() bfin_read16(CAN_MB05_DATA3)
+#define bfin_write_CAN_MB05_DATA3(val) bfin_write16(CAN_MB05_DATA3,val)
+#define bfin_read_CAN_MB05_DATA2() bfin_read16(CAN_MB05_DATA2)
+#define bfin_write_CAN_MB05_DATA2(val) bfin_write16(CAN_MB05_DATA2,val)
+#define bfin_read_CAN_MB05_DATA1() bfin_read16(CAN_MB05_DATA1)
+#define bfin_write_CAN_MB05_DATA1(val) bfin_write16(CAN_MB05_DATA1,val)
+#define bfin_read_CAN_MB05_DATA0() bfin_read16(CAN_MB05_DATA0)
+#define bfin_write_CAN_MB05_DATA0(val) bfin_write16(CAN_MB05_DATA0,val)
+
+#define bfin_read_CAN_MB06_ID1() bfin_read16(CAN_MB06_ID1)
+#define bfin_write_CAN_MB06_ID1(val) bfin_write16(CAN_MB06_ID1,val)
+#define bfin_read_CAN_MB06_ID0() bfin_read16(CAN_MB06_ID0)
+#define bfin_write_CAN_MB06_ID0(val) bfin_write16(CAN_MB06_ID0,val)
+#define bfin_read_CAN_MB06_TIMESTAMP() bfin_read16(CAN_MB06_TIMESTAMP)
+#define bfin_write_CAN_MB06_TIMESTAMP(val) bfin_write16(CAN_MB06_TIMESTAMP,val)
+#define bfin_read_CAN_MB06_LENGTH() bfin_read16(CAN_MB06_LENGTH)
+#define bfin_write_CAN_MB06_LENGTH(val) bfin_write16(CAN_MB06_LENGTH,val)
+#define bfin_read_CAN_MB06_DATA3() bfin_read16(CAN_MB06_DATA3)
+#define bfin_write_CAN_MB06_DATA3(val) bfin_write16(CAN_MB06_DATA3,val)
+#define bfin_read_CAN_MB06_DATA2() bfin_read16(CAN_MB06_DATA2)
+#define bfin_write_CAN_MB06_DATA2(val) bfin_write16(CAN_MB06_DATA2,val)
+#define bfin_read_CAN_MB06_DATA1() bfin_read16(CAN_MB06_DATA1)
+#define bfin_write_CAN_MB06_DATA1(val) bfin_write16(CAN_MB06_DATA1,val)
+#define bfin_read_CAN_MB06_DATA0() bfin_read16(CAN_MB06_DATA0)
+#define bfin_write_CAN_MB06_DATA0(val) bfin_write16(CAN_MB06_DATA0,val)
+
+#define bfin_read_CAN_MB07_ID1() bfin_read16(CAN_MB07_ID1)
+#define bfin_write_CAN_MB07_ID1(val) bfin_write16(CAN_MB07_ID1,val)
+#define bfin_read_CAN_MB07_ID0() bfin_read16(CAN_MB07_ID0)
+#define bfin_write_CAN_MB07_ID0(val) bfin_write16(CAN_MB07_ID0,val)
+#define bfin_read_CAN_MB07_TIMESTAMP() bfin_read16(CAN_MB07_TIMESTAMP)
+#define bfin_write_CAN_MB07_TIMESTAMP(val) bfin_write16(CAN_MB07_TIMESTAMP,val)
+#define bfin_read_CAN_MB07_LENGTH() bfin_read16(CAN_MB07_LENGTH)
+#define bfin_write_CAN_MB07_LENGTH(val) bfin_write16(CAN_MB07_LENGTH,val)
+#define bfin_read_CAN_MB07_DATA3() bfin_read16(CAN_MB07_DATA3)
+#define bfin_write_CAN_MB07_DATA3(val) bfin_write16(CAN_MB07_DATA3,val)
+#define bfin_read_CAN_MB07_DATA2() bfin_read16(CAN_MB07_DATA2)
+#define bfin_write_CAN_MB07_DATA2(val) bfin_write16(CAN_MB07_DATA2,val)
+#define bfin_read_CAN_MB07_DATA1() bfin_read16(CAN_MB07_DATA1)
+#define bfin_write_CAN_MB07_DATA1(val) bfin_write16(CAN_MB07_DATA1,val)
+#define bfin_read_CAN_MB07_DATA0() bfin_read16(CAN_MB07_DATA0)
+#define bfin_write_CAN_MB07_DATA0(val) bfin_write16(CAN_MB07_DATA0,val)
+
+#define bfin_read_CAN_MB08_ID1() bfin_read16(CAN_MB08_ID1)
+#define bfin_write_CAN_MB08_ID1(val) bfin_write16(CAN_MB08_ID1,val)
+#define bfin_read_CAN_MB08_ID0() bfin_read16(CAN_MB08_ID0)
+#define bfin_write_CAN_MB08_ID0(val) bfin_write16(CAN_MB08_ID0,val)
+#define bfin_read_CAN_MB08_TIMESTAMP() bfin_read16(CAN_MB08_TIMESTAMP)
+#define bfin_write_CAN_MB08_TIMESTAMP(val) bfin_write16(CAN_MB08_TIMESTAMP,val)
+#define bfin_read_CAN_MB08_LENGTH() bfin_read16(CAN_MB08_LENGTH)
+#define bfin_write_CAN_MB08_LENGTH(val) bfin_write16(CAN_MB08_LENGTH,val)
+#define bfin_read_CAN_MB08_DATA3() bfin_read16(CAN_MB08_DATA3)
+#define bfin_write_CAN_MB08_DATA3(val) bfin_write16(CAN_MB08_DATA3,val)
+#define bfin_read_CAN_MB08_DATA2() bfin_read16(CAN_MB08_DATA2)
+#define bfin_write_CAN_MB08_DATA2(val) bfin_write16(CAN_MB08_DATA2,val)
+#define bfin_read_CAN_MB08_DATA1() bfin_read16(CAN_MB08_DATA1)
+#define bfin_write_CAN_MB08_DATA1(val) bfin_write16(CAN_MB08_DATA1,val)
+#define bfin_read_CAN_MB08_DATA0() bfin_read16(CAN_MB08_DATA0)
+#define bfin_write_CAN_MB08_DATA0(val) bfin_write16(CAN_MB08_DATA0,val)
+
+#define bfin_read_CAN_MB09_ID1() bfin_read16(CAN_MB09_ID1)
+#define bfin_write_CAN_MB09_ID1(val) bfin_write16(CAN_MB09_ID1,val)
+#define bfin_read_CAN_MB09_ID0() bfin_read16(CAN_MB09_ID0)
+#define bfin_write_CAN_MB09_ID0(val) bfin_write16(CAN_MB09_ID0,val)
+#define bfin_read_CAN_MB09_TIMESTAMP() bfin_read16(CAN_MB09_TIMESTAMP)
+#define bfin_write_CAN_MB09_TIMESTAMP(val) bfin_write16(CAN_MB09_TIMESTAMP,val)
+#define bfin_read_CAN_MB09_LENGTH() bfin_read16(CAN_MB09_LENGTH)
+#define bfin_write_CAN_MB09_LENGTH(val) bfin_write16(CAN_MB09_LENGTH,val)
+#define bfin_read_CAN_MB09_DATA3() bfin_read16(CAN_MB09_DATA3)
+#define bfin_write_CAN_MB09_DATA3(val) bfin_write16(CAN_MB09_DATA3,val)
+#define bfin_read_CAN_MB09_DATA2() bfin_read16(CAN_MB09_DATA2)
+#define bfin_write_CAN_MB09_DATA2(val) bfin_write16(CAN_MB09_DATA2,val)
+#define bfin_read_CAN_MB09_DATA1() bfin_read16(CAN_MB09_DATA1)
+#define bfin_write_CAN_MB09_DATA1(val) bfin_write16(CAN_MB09_DATA1,val)
+#define bfin_read_CAN_MB09_DATA0() bfin_read16(CAN_MB09_DATA0)
+#define bfin_write_CAN_MB09_DATA0(val) bfin_write16(CAN_MB09_DATA0,val)
+
+#define bfin_read_CAN_MB10_ID1() bfin_read16(CAN_MB10_ID1)
+#define bfin_write_CAN_MB10_ID1(val) bfin_write16(CAN_MB10_ID1,val)
+#define bfin_read_CAN_MB10_ID0() bfin_read16(CAN_MB10_ID0)
+#define bfin_write_CAN_MB10_ID0(val) bfin_write16(CAN_MB10_ID0,val)
+#define bfin_read_CAN_MB10_TIMESTAMP() bfin_read16(CAN_MB10_TIMESTAMP)
+#define bfin_write_CAN_MB10_TIMESTAMP(val) bfin_write16(CAN_MB10_TIMESTAMP,val)
+#define bfin_read_CAN_MB10_LENGTH() bfin_read16(CAN_MB10_LENGTH)
+#define bfin_write_CAN_MB10_LENGTH(val) bfin_write16(CAN_MB10_LENGTH,val)
+#define bfin_read_CAN_MB10_DATA3() bfin_read16(CAN_MB10_DATA3)
+#define bfin_write_CAN_MB10_DATA3(val) bfin_write16(CAN_MB10_DATA3,val)
+#define bfin_read_CAN_MB10_DATA2() bfin_read16(CAN_MB10_DATA2)
+#define bfin_write_CAN_MB10_DATA2(val) bfin_write16(CAN_MB10_DATA2,val)
+#define bfin_read_CAN_MB10_DATA1() bfin_read16(CAN_MB10_DATA1)
+#define bfin_write_CAN_MB10_DATA1(val) bfin_write16(CAN_MB10_DATA1,val)
+#define bfin_read_CAN_MB10_DATA0() bfin_read16(CAN_MB10_DATA0)
+#define bfin_write_CAN_MB10_DATA0(val) bfin_write16(CAN_MB10_DATA0,val)
+
+#define bfin_read_CAN_MB11_ID1() bfin_read16(CAN_MB11_ID1)
+#define bfin_write_CAN_MB11_ID1(val) bfin_write16(CAN_MB11_ID1,val)
+#define bfin_read_CAN_MB11_ID0() bfin_read16(CAN_MB11_ID0)
+#define bfin_write_CAN_MB11_ID0(val) bfin_write16(CAN_MB11_ID0,val)
+#define bfin_read_CAN_MB11_TIMESTAMP() bfin_read16(CAN_MB11_TIMESTAMP)
+#define bfin_write_CAN_MB11_TIMESTAMP(val) bfin_write16(CAN_MB11_TIMESTAMP,val)
+#define bfin_read_CAN_MB11_LENGTH() bfin_read16(CAN_MB11_LENGTH)
+#define bfin_write_CAN_MB11_LENGTH(val) bfin_write16(CAN_MB11_LENGTH,val)
+#define bfin_read_CAN_MB11_DATA3() bfin_read16(CAN_MB11_DATA3)
+#define bfin_write_CAN_MB11_DATA3(val) bfin_write16(CAN_MB11_DATA3,val)
+#define bfin_read_CAN_MB11_DATA2() bfin_read16(CAN_MB11_DATA2)
+#define bfin_write_CAN_MB11_DATA2(val) bfin_write16(CAN_MB11_DATA2,val)
+#define bfin_read_CAN_MB11_DATA1() bfin_read16(CAN_MB11_DATA1)
+#define bfin_write_CAN_MB11_DATA1(val) bfin_write16(CAN_MB11_DATA1,val)
+#define bfin_read_CAN_MB11_DATA0() bfin_read16(CAN_MB11_DATA0)
+#define bfin_write_CAN_MB11_DATA0(val) bfin_write16(CAN_MB11_DATA0,val)
+
+#define bfin_read_CAN_MB12_ID1() bfin_read16(CAN_MB12_ID1)
+#define bfin_write_CAN_MB12_ID1(val) bfin_write16(CAN_MB12_ID1,val)
+#define bfin_read_CAN_MB12_ID0() bfin_read16(CAN_MB12_ID0)
+#define bfin_write_CAN_MB12_ID0(val) bfin_write16(CAN_MB12_ID0,val)
+#define bfin_read_CAN_MB12_TIMESTAMP() bfin_read16(CAN_MB12_TIMESTAMP)
+#define bfin_write_CAN_MB12_TIMESTAMP(val) bfin_write16(CAN_MB12_TIMESTAMP,val)
+#define bfin_read_CAN_MB12_LENGTH() bfin_read16(CAN_MB12_LENGTH)
+#define bfin_write_CAN_MB12_LENGTH(val) bfin_write16(CAN_MB12_LENGTH,val)
+#define bfin_read_CAN_MB12_DATA3() bfin_read16(CAN_MB12_DATA3)
+#define bfin_write_CAN_MB12_DATA3(val) bfin_write16(CAN_MB12_DATA3,val)
+#define bfin_read_CAN_MB12_DATA2() bfin_read16(CAN_MB12_DATA2)
+#define bfin_write_CAN_MB12_DATA2(val) bfin_write16(CAN_MB12_DATA2,val)
+#define bfin_read_CAN_MB12_DATA1() bfin_read16(CAN_MB12_DATA1)
+#define bfin_write_CAN_MB12_DATA1(val) bfin_write16(CAN_MB12_DATA1,val)
+#define bfin_read_CAN_MB12_DATA0() bfin_read16(CAN_MB12_DATA0)
+#define bfin_write_CAN_MB12_DATA0(val) bfin_write16(CAN_MB12_DATA0,val)
+
+#define bfin_read_CAN_MB13_ID1() bfin_read16(CAN_MB13_ID1)
+#define bfin_write_CAN_MB13_ID1(val) bfin_write16(CAN_MB13_ID1,val)
+#define bfin_read_CAN_MB13_ID0() bfin_read16(CAN_MB13_ID0)
+#define bfin_write_CAN_MB13_ID0(val) bfin_write16(CAN_MB13_ID0,val)
+#define bfin_read_CAN_MB13_TIMESTAMP() bfin_read16(CAN_MB13_TIMESTAMP)
+#define bfin_write_CAN_MB13_TIMESTAMP(val) bfin_write16(CAN_MB13_TIMESTAMP,val)
+#define bfin_read_CAN_MB13_LENGTH() bfin_read16(CAN_MB13_LENGTH)
+#define bfin_write_CAN_MB13_LENGTH(val) bfin_write16(CAN_MB13_LENGTH,val)
+#define bfin_read_CAN_MB13_DATA3() bfin_read16(CAN_MB13_DATA3)
+#define bfin_write_CAN_MB13_DATA3(val) bfin_write16(CAN_MB13_DATA3,val)
+#define bfin_read_CAN_MB13_DATA2() bfin_read16(CAN_MB13_DATA2)
+#define bfin_write_CAN_MB13_DATA2(val) bfin_write16(CAN_MB13_DATA2,val)
+#define bfin_read_CAN_MB13_DATA1() bfin_read16(CAN_MB13_DATA1)
+#define bfin_write_CAN_MB13_DATA1(val) bfin_write16(CAN_MB13_DATA1,val)
+#define bfin_read_CAN_MB13_DATA0() bfin_read16(CAN_MB13_DATA0)
+#define bfin_write_CAN_MB13_DATA0(val) bfin_write16(CAN_MB13_DATA0,val)
+
+#define bfin_read_CAN_MB14_ID1() bfin_read16(CAN_MB14_ID1)
+#define bfin_write_CAN_MB14_ID1(val) bfin_write16(CAN_MB14_ID1,val)
+#define bfin_read_CAN_MB14_ID0() bfin_read16(CAN_MB14_ID0)
+#define bfin_write_CAN_MB14_ID0(val) bfin_write16(CAN_MB14_ID0,val)
+#define bfin_read_CAN_MB14_TIMESTAMP() bfin_read16(CAN_MB14_TIMESTAMP)
+#define bfin_write_CAN_MB14_TIMESTAMP(val) bfin_write16(CAN_MB14_TIMESTAMP,val)
+#define bfin_read_CAN_MB14_LENGTH() bfin_read16(CAN_MB14_LENGTH)
+#define bfin_write_CAN_MB14_LENGTH(val) bfin_write16(CAN_MB14_LENGTH,val)
+#define bfin_read_CAN_MB14_DATA3() bfin_read16(CAN_MB14_DATA3)
+#define bfin_write_CAN_MB14_DATA3(val) bfin_write16(CAN_MB14_DATA3,val)
+#define bfin_read_CAN_MB14_DATA2() bfin_read16(CAN_MB14_DATA2)
+#define bfin_write_CAN_MB14_DATA2(val) bfin_write16(CAN_MB14_DATA2,val)
+#define bfin_read_CAN_MB14_DATA1() bfin_read16(CAN_MB14_DATA1)
+#define bfin_write_CAN_MB14_DATA1(val) bfin_write16(CAN_MB14_DATA1,val)
+#define bfin_read_CAN_MB14_DATA0() bfin_read16(CAN_MB14_DATA0)
+#define bfin_write_CAN_MB14_DATA0(val) bfin_write16(CAN_MB14_DATA0,val)
+
+#define bfin_read_CAN_MB15_ID1() bfin_read16(CAN_MB15_ID1)
+#define bfin_write_CAN_MB15_ID1(val) bfin_write16(CAN_MB15_ID1,val)
+#define bfin_read_CAN_MB15_ID0() bfin_read16(CAN_MB15_ID0)
+#define bfin_write_CAN_MB15_ID0(val) bfin_write16(CAN_MB15_ID0,val)
+#define bfin_read_CAN_MB15_TIMESTAMP() bfin_read16(CAN_MB15_TIMESTAMP)
+#define bfin_write_CAN_MB15_TIMESTAMP(val) bfin_write16(CAN_MB15_TIMESTAMP,val)
+#define bfin_read_CAN_MB15_LENGTH() bfin_read16(CAN_MB15_LENGTH)
+#define bfin_write_CAN_MB15_LENGTH(val) bfin_write16(CAN_MB15_LENGTH,val)
+#define bfin_read_CAN_MB15_DATA3() bfin_read16(CAN_MB15_DATA3)
+#define bfin_write_CAN_MB15_DATA3(val) bfin_write16(CAN_MB15_DATA3,val)
+#define bfin_read_CAN_MB15_DATA2() bfin_read16(CAN_MB15_DATA2)
+#define bfin_write_CAN_MB15_DATA2(val) bfin_write16(CAN_MB15_DATA2,val)
+#define bfin_read_CAN_MB15_DATA1() bfin_read16(CAN_MB15_DATA1)
+#define bfin_write_CAN_MB15_DATA1(val) bfin_write16(CAN_MB15_DATA1,val)
+#define bfin_read_CAN_MB15_DATA0() bfin_read16(CAN_MB15_DATA0)
+#define bfin_write_CAN_MB15_DATA0(val) bfin_write16(CAN_MB15_DATA0,val)
+
+#define bfin_read_CAN_MB16_ID1() bfin_read16(CAN_MB16_ID1)
+#define bfin_write_CAN_MB16_ID1(val) bfin_write16(CAN_MB16_ID1,val)
+#define bfin_read_CAN_MB16_ID0() bfin_read16(CAN_MB16_ID0)
+#define bfin_write_CAN_MB16_ID0(val) bfin_write16(CAN_MB16_ID0,val)
+#define bfin_read_CAN_MB16_TIMESTAMP() bfin_read16(CAN_MB16_TIMESTAMP)
+#define bfin_write_CAN_MB16_TIMESTAMP(val) bfin_write16(CAN_MB16_TIMESTAMP,val)
+#define bfin_read_CAN_MB16_LENGTH() bfin_read16(CAN_MB16_LENGTH)
+#define bfin_write_CAN_MB16_LENGTH(val) bfin_write16(CAN_MB16_LENGTH,val)
+#define bfin_read_CAN_MB16_DATA3() bfin_read16(CAN_MB16_DATA3)
+#define bfin_write_CAN_MB16_DATA3(val) bfin_write16(CAN_MB16_DATA3,val)
+#define bfin_read_CAN_MB16_DATA2() bfin_read16(CAN_MB16_DATA2)
+#define bfin_write_CAN_MB16_DATA2(val) bfin_write16(CAN_MB16_DATA2,val)
+#define bfin_read_CAN_MB16_DATA1() bfin_read16(CAN_MB16_DATA1)
+#define bfin_write_CAN_MB16_DATA1(val) bfin_write16(CAN_MB16_DATA1,val)
+#define bfin_read_CAN_MB16_DATA0() bfin_read16(CAN_MB16_DATA0)
+#define bfin_write_CAN_MB16_DATA0(val) bfin_write16(CAN_MB16_DATA0,val)
+
+#define bfin_read_CAN_MB17_ID1() bfin_read16(CAN_MB17_ID1)
+#define bfin_write_CAN_MB17_ID1(val) bfin_write16(CAN_MB17_ID1,val)
+#define bfin_read_CAN_MB17_ID0() bfin_read16(CAN_MB17_ID0)
+#define bfin_write_CAN_MB17_ID0(val) bfin_write16(CAN_MB17_ID0,val)
+#define bfin_read_CAN_MB17_TIMESTAMP() bfin_read16(CAN_MB17_TIMESTAMP)
+#define bfin_write_CAN_MB17_TIMESTAMP(val) bfin_write16(CAN_MB17_TIMESTAMP,val)
+#define bfin_read_CAN_MB17_LENGTH() bfin_read16(CAN_MB17_LENGTH)
+#define bfin_write_CAN_MB17_LENGTH(val) bfin_write16(CAN_MB17_LENGTH,val)
+#define bfin_read_CAN_MB17_DATA3() bfin_read16(CAN_MB17_DATA3)
+#define bfin_write_CAN_MB17_DATA3(val) bfin_write16(CAN_MB17_DATA3,val)
+#define bfin_read_CAN_MB17_DATA2() bfin_read16(CAN_MB17_DATA2)
+#define bfin_write_CAN_MB17_DATA2(val) bfin_write16(CAN_MB17_DATA2,val)
+#define bfin_read_CAN_MB17_DATA1() bfin_read16(CAN_MB17_DATA1)
+#define bfin_write_CAN_MB17_DATA1(val) bfin_write16(CAN_MB17_DATA1,val)
+#define bfin_read_CAN_MB17_DATA0() bfin_read16(CAN_MB17_DATA0)
+#define bfin_write_CAN_MB17_DATA0(val) bfin_write16(CAN_MB17_DATA0,val)
+
+#define bfin_read_CAN_MB18_ID1() bfin_read16(CAN_MB18_ID1)
+#define bfin_write_CAN_MB18_ID1(val) bfin_write16(CAN_MB18_ID1,val)
+#define bfin_read_CAN_MB18_ID0() bfin_read16(CAN_MB18_ID0)
+#define bfin_write_CAN_MB18_ID0(val) bfin_write16(CAN_MB18_ID0,val)
+#define bfin_read_CAN_MB18_TIMESTAMP() bfin_read16(CAN_MB18_TIMESTAMP)
+#define bfin_write_CAN_MB18_TIMESTAMP(val) bfin_write16(CAN_MB18_TIMESTAMP,val)
+#define bfin_read_CAN_MB18_LENGTH() bfin_read16(CAN_MB18_LENGTH)
+#define bfin_write_CAN_MB18_LENGTH(val) bfin_write16(CAN_MB18_LENGTH,val)
+#define bfin_read_CAN_MB18_DATA3() bfin_read16(CAN_MB18_DATA3)
+#define bfin_write_CAN_MB18_DATA3(val) bfin_write16(CAN_MB18_DATA3,val)
+#define bfin_read_CAN_MB18_DATA2() bfin_read16(CAN_MB18_DATA2)
+#define bfin_write_CAN_MB18_DATA2(val) bfin_write16(CAN_MB18_DATA2,val)
+#define bfin_read_CAN_MB18_DATA1() bfin_read16(CAN_MB18_DATA1)
+#define bfin_write_CAN_MB18_DATA1(val) bfin_write16(CAN_MB18_DATA1,val)
+#define bfin_read_CAN_MB18_DATA0() bfin_read16(CAN_MB18_DATA0)
+#define bfin_write_CAN_MB18_DATA0(val) bfin_write16(CAN_MB18_DATA0,val)
+
+#define bfin_read_CAN_MB19_ID1() bfin_read16(CAN_MB19_ID1)
+#define bfin_write_CAN_MB19_ID1(val) bfin_write16(CAN_MB19_ID1,val)
+#define bfin_read_CAN_MB19_ID0() bfin_read16(CAN_MB19_ID0)
+#define bfin_write_CAN_MB19_ID0(val) bfin_write16(CAN_MB19_ID0,val)
+#define bfin_read_CAN_MB19_TIMESTAMP() bfin_read16(CAN_MB19_TIMESTAMP)
+#define bfin_write_CAN_MB19_TIMESTAMP(val) bfin_write16(CAN_MB19_TIMESTAMP,val)
+#define bfin_read_CAN_MB19_LENGTH() bfin_read16(CAN_MB19_LENGTH)
+#define bfin_write_CAN_MB19_LENGTH(val) bfin_write16(CAN_MB19_LENGTH,val)
+#define bfin_read_CAN_MB19_DATA3() bfin_read16(CAN_MB19_DATA3)
+#define bfin_write_CAN_MB19_DATA3(val) bfin_write16(CAN_MB19_DATA3,val)
+#define bfin_read_CAN_MB19_DATA2() bfin_read16(CAN_MB19_DATA2)
+#define bfin_write_CAN_MB19_DATA2(val) bfin_write16(CAN_MB19_DATA2,val)
+#define bfin_read_CAN_MB19_DATA1() bfin_read16(CAN_MB19_DATA1)
+#define bfin_write_CAN_MB19_DATA1(val) bfin_write16(CAN_MB19_DATA1,val)
+#define bfin_read_CAN_MB19_DATA0() bfin_read16(CAN_MB19_DATA0)
+#define bfin_write_CAN_MB19_DATA0(val) bfin_write16(CAN_MB19_DATA0,val)
+
+#define bfin_read_CAN_MB20_ID1() bfin_read16(CAN_MB20_ID1)
+#define bfin_write_CAN_MB20_ID1(val) bfin_write16(CAN_MB20_ID1,val)
+#define bfin_read_CAN_MB20_ID0() bfin_read16(CAN_MB20_ID0)
+#define bfin_write_CAN_MB20_ID0(val) bfin_write16(CAN_MB20_ID0,val)
+#define bfin_read_CAN_MB20_TIMESTAMP() bfin_read16(CAN_MB20_TIMESTAMP)
+#define bfin_write_CAN_MB20_TIMESTAMP(val) bfin_write16(CAN_MB20_TIMESTAMP,val)
+#define bfin_read_CAN_MB20_LENGTH() bfin_read16(CAN_MB20_LENGTH)
+#define bfin_write_CAN_MB20_LENGTH(val) bfin_write16(CAN_MB20_LENGTH,val)
+#define bfin_read_CAN_MB20_DATA3() bfin_read16(CAN_MB20_DATA3)
+#define bfin_write_CAN_MB20_DATA3(val) bfin_write16(CAN_MB20_DATA3,val)
+#define bfin_read_CAN_MB20_DATA2() bfin_read16(CAN_MB20_DATA2)
+#define bfin_write_CAN_MB20_DATA2(val) bfin_write16(CAN_MB20_DATA2,val)
+#define bfin_read_CAN_MB20_DATA1() bfin_read16(CAN_MB20_DATA1)
+#define bfin_write_CAN_MB20_DATA1(val) bfin_write16(CAN_MB20_DATA1,val)
+#define bfin_read_CAN_MB20_DATA0() bfin_read16(CAN_MB20_DATA0)
+#define bfin_write_CAN_MB20_DATA0(val) bfin_write16(CAN_MB20_DATA0,val)
+
+#define bfin_read_CAN_MB21_ID1() bfin_read16(CAN_MB21_ID1)
+#define bfin_write_CAN_MB21_ID1(val) bfin_write16(CAN_MB21_ID1,val)
+#define bfin_read_CAN_MB21_ID0() bfin_read16(CAN_MB21_ID0)
+#define bfin_write_CAN_MB21_ID0(val) bfin_write16(CAN_MB21_ID0,val)
+#define bfin_read_CAN_MB21_TIMESTAMP() bfin_read16(CAN_MB21_TIMESTAMP)
+#define bfin_write_CAN_MB21_TIMESTAMP(val) bfin_write16(CAN_MB21_TIMESTAMP,val)
+#define bfin_read_CAN_MB21_LENGTH() bfin_read16(CAN_MB21_LENGTH)
+#define bfin_write_CAN_MB21_LENGTH(val) bfin_write16(CAN_MB21_LENGTH,val)
+#define bfin_read_CAN_MB21_DATA3() bfin_read16(CAN_MB21_DATA3)
+#define bfin_write_CAN_MB21_DATA3(val) bfin_write16(CAN_MB21_DATA3,val)
+#define bfin_read_CAN_MB21_DATA2() bfin_read16(CAN_MB21_DATA2)
+#define bfin_write_CAN_MB21_DATA2(val) bfin_write16(CAN_MB21_DATA2,val)
+#define bfin_read_CAN_MB21_DATA1() bfin_read16(CAN_MB21_DATA1)
+#define bfin_write_CAN_MB21_DATA1(val) bfin_write16(CAN_MB21_DATA1,val)
+#define bfin_read_CAN_MB21_DATA0() bfin_read16(CAN_MB21_DATA0)
+#define bfin_write_CAN_MB21_DATA0(val) bfin_write16(CAN_MB21_DATA0,val)
+
+#define bfin_read_CAN_MB22_ID1() bfin_read16(CAN_MB22_ID1)
+#define bfin_write_CAN_MB22_ID1(val) bfin_write16(CAN_MB22_ID1,val)
+#define bfin_read_CAN_MB22_ID0() bfin_read16(CAN_MB22_ID0)
+#define bfin_write_CAN_MB22_ID0(val) bfin_write16(CAN_MB22_ID0,val)
+#define bfin_read_CAN_MB22_TIMESTAMP() bfin_read16(CAN_MB22_TIMESTAMP)
+#define bfin_write_CAN_MB22_TIMESTAMP(val) bfin_write16(CAN_MB22_TIMESTAMP,val)
+#define bfin_read_CAN_MB22_LENGTH() bfin_read16(CAN_MB22_LENGTH)
+#define bfin_write_CAN_MB22_LENGTH(val) bfin_write16(CAN_MB22_LENGTH,val)
+#define bfin_read_CAN_MB22_DATA3() bfin_read16(CAN_MB22_DATA3)
+#define bfin_write_CAN_MB22_DATA3(val) bfin_write16(CAN_MB22_DATA3,val)
+#define bfin_read_CAN_MB22_DATA2() bfin_read16(CAN_MB22_DATA2)
+#define bfin_write_CAN_MB22_DATA2(val) bfin_write16(CAN_MB22_DATA2,val)
+#define bfin_read_CAN_MB22_DATA1() bfin_read16(CAN_MB22_DATA1)
+#define bfin_write_CAN_MB22_DATA1(val) bfin_write16(CAN_MB22_DATA1,val)
+#define bfin_read_CAN_MB22_DATA0() bfin_read16(CAN_MB22_DATA0)
+#define bfin_write_CAN_MB22_DATA0(val) bfin_write16(CAN_MB22_DATA0,val)
+
+#define bfin_read_CAN_MB23_ID1() bfin_read16(CAN_MB23_ID1)
+#define bfin_write_CAN_MB23_ID1(val) bfin_write16(CAN_MB23_ID1,val)
+#define bfin_read_CAN_MB23_ID0() bfin_read16(CAN_MB23_ID0)
+#define bfin_write_CAN_MB23_ID0(val) bfin_write16(CAN_MB23_ID0,val)
+#define bfin_read_CAN_MB23_TIMESTAMP() bfin_read16(CAN_MB23_TIMESTAMP)
+#define bfin_write_CAN_MB23_TIMESTAMP(val) bfin_write16(CAN_MB23_TIMESTAMP,val)
+#define bfin_read_CAN_MB23_LENGTH() bfin_read16(CAN_MB23_LENGTH)
+#define bfin_write_CAN_MB23_LENGTH(val) bfin_write16(CAN_MB23_LENGTH,val)
+#define bfin_read_CAN_MB23_DATA3() bfin_read16(CAN_MB23_DATA3)
+#define bfin_write_CAN_MB23_DATA3(val) bfin_write16(CAN_MB23_DATA3,val)
+#define bfin_read_CAN_MB23_DATA2() bfin_read16(CAN_MB23_DATA2)
+#define bfin_write_CAN_MB23_DATA2(val) bfin_write16(CAN_MB23_DATA2,val)
+#define bfin_read_CAN_MB23_DATA1() bfin_read16(CAN_MB23_DATA1)
+#define bfin_write_CAN_MB23_DATA1(val) bfin_write16(CAN_MB23_DATA1,val)
+#define bfin_read_CAN_MB23_DATA0() bfin_read16(CAN_MB23_DATA0)
+#define bfin_write_CAN_MB23_DATA0(val) bfin_write16(CAN_MB23_DATA0,val)
+
+#define bfin_read_CAN_MB24_ID1() bfin_read16(CAN_MB24_ID1)
+#define bfin_write_CAN_MB24_ID1(val) bfin_write16(CAN_MB24_ID1,val)
+#define bfin_read_CAN_MB24_ID0() bfin_read16(CAN_MB24_ID0)
+#define bfin_write_CAN_MB24_ID0(val) bfin_write16(CAN_MB24_ID0,val)
+#define bfin_read_CAN_MB24_TIMESTAMP() bfin_read16(CAN_MB24_TIMESTAMP)
+#define bfin_write_CAN_MB24_TIMESTAMP(val) bfin_write16(CAN_MB24_TIMESTAMP,val)
+#define bfin_read_CAN_MB24_LENGTH() bfin_read16(CAN_MB24_LENGTH)
+#define bfin_write_CAN_MB24_LENGTH(val) bfin_write16(CAN_MB24_LENGTH,val)
+#define bfin_read_CAN_MB24_DATA3() bfin_read16(CAN_MB24_DATA3)
+#define bfin_write_CAN_MB24_DATA3(val) bfin_write16(CAN_MB24_DATA3,val)
+#define bfin_read_CAN_MB24_DATA2() bfin_read16(CAN_MB24_DATA2)
+#define bfin_write_CAN_MB24_DATA2(val) bfin_write16(CAN_MB24_DATA2,val)
+#define bfin_read_CAN_MB24_DATA1() bfin_read16(CAN_MB24_DATA1)
+#define bfin_write_CAN_MB24_DATA1(val) bfin_write16(CAN_MB24_DATA1,val)
+#define bfin_read_CAN_MB24_DATA0() bfin_read16(CAN_MB24_DATA0)
+#define bfin_write_CAN_MB24_DATA0(val) bfin_write16(CAN_MB24_DATA0,val)
+
+#define bfin_read_CAN_MB25_ID1() bfin_read16(CAN_MB25_ID1)
+#define bfin_write_CAN_MB25_ID1(val) bfin_write16(CAN_MB25_ID1,val)
+#define bfin_read_CAN_MB25_ID0() bfin_read16(CAN_MB25_ID0)
+#define bfin_write_CAN_MB25_ID0(val) bfin_write16(CAN_MB25_ID0,val)
+#define bfin_read_CAN_MB25_TIMESTAMP() bfin_read16(CAN_MB25_TIMESTAMP)
+#define bfin_write_CAN_MB25_TIMESTAMP(val) bfin_write16(CAN_MB25_TIMESTAMP,val)
+#define bfin_read_CAN_MB25_LENGTH() bfin_read16(CAN_MB25_LENGTH)
+#define bfin_write_CAN_MB25_LENGTH(val) bfin_write16(CAN_MB25_LENGTH,val)
+#define bfin_read_CAN_MB25_DATA3() bfin_read16(CAN_MB25_DATA3)
+#define bfin_write_CAN_MB25_DATA3(val) bfin_write16(CAN_MB25_DATA3,val)
+#define bfin_read_CAN_MB25_DATA2() bfin_read16(CAN_MB25_DATA2)
+#define bfin_write_CAN_MB25_DATA2(val) bfin_write16(CAN_MB25_DATA2,val)
+#define bfin_read_CAN_MB25_DATA1() bfin_read16(CAN_MB25_DATA1)
+#define bfin_write_CAN_MB25_DATA1(val) bfin_write16(CAN_MB25_DATA1,val)
+#define bfin_read_CAN_MB25_DATA0() bfin_read16(CAN_MB25_DATA0)
+#define bfin_write_CAN_MB25_DATA0(val) bfin_write16(CAN_MB25_DATA0,val)
+
+#define bfin_read_CAN_MB26_ID1() bfin_read16(CAN_MB26_ID1)
+#define bfin_write_CAN_MB26_ID1(val) bfin_write16(CAN_MB26_ID1,val)
+#define bfin_read_CAN_MB26_ID0() bfin_read16(CAN_MB26_ID0)
+#define bfin_write_CAN_MB26_ID0(val) bfin_write16(CAN_MB26_ID0,val)
+#define bfin_read_CAN_MB26_TIMESTAMP() bfin_read16(CAN_MB26_TIMESTAMP)
+#define bfin_write_CAN_MB26_TIMESTAMP(val) bfin_write16(CAN_MB26_TIMESTAMP,val)
+#define bfin_read_CAN_MB26_LENGTH() bfin_read16(CAN_MB26_LENGTH)
+#define bfin_write_CAN_MB26_LENGTH(val) bfin_write16(CAN_MB26_LENGTH,val)
+#define bfin_read_CAN_MB26_DATA3() bfin_read16(CAN_MB26_DATA3)
+#define bfin_write_CAN_MB26_DATA3(val) bfin_write16(CAN_MB26_DATA3,val)
+#define bfin_read_CAN_MB26_DATA2() bfin_read16(CAN_MB26_DATA2)
+#define bfin_write_CAN_MB26_DATA2(val) bfin_write16(CAN_MB26_DATA2,val)
+#define bfin_read_CAN_MB26_DATA1() bfin_read16(CAN_MB26_DATA1)
+#define bfin_write_CAN_MB26_DATA1(val) bfin_write16(CAN_MB26_DATA1,val)
+#define bfin_read_CAN_MB26_DATA0() bfin_read16(CAN_MB26_DATA0)
+#define bfin_write_CAN_MB26_DATA0(val) bfin_write16(CAN_MB26_DATA0,val)
+
+#define bfin_read_CAN_MB27_ID1() bfin_read16(CAN_MB27_ID1)
+#define bfin_write_CAN_MB27_ID1(val) bfin_write16(CAN_MB27_ID1,val)
+#define bfin_read_CAN_MB27_ID0() bfin_read16(CAN_MB27_ID0)
+#define bfin_write_CAN_MB27_ID0(val) bfin_write16(CAN_MB27_ID0,val)
+#define bfin_read_CAN_MB27_TIMESTAMP() bfin_read16(CAN_MB27_TIMESTAMP)
+#define bfin_write_CAN_MB27_TIMESTAMP(val) bfin_write16(CAN_MB27_TIMESTAMP,val)
+#define bfin_read_CAN_MB27_LENGTH() bfin_read16(CAN_MB27_LENGTH)
+#define bfin_write_CAN_MB27_LENGTH(val) bfin_write16(CAN_MB27_LENGTH,val)
+#define bfin_read_CAN_MB27_DATA3() bfin_read16(CAN_MB27_DATA3)
+#define bfin_write_CAN_MB27_DATA3(val) bfin_write16(CAN_MB27_DATA3,val)
+#define bfin_read_CAN_MB27_DATA2() bfin_read16(CAN_MB27_DATA2)
+#define bfin_write_CAN_MB27_DATA2(val) bfin_write16(CAN_MB27_DATA2,val)
+#define bfin_read_CAN_MB27_DATA1() bfin_read16(CAN_MB27_DATA1)
+#define bfin_write_CAN_MB27_DATA1(val) bfin_write16(CAN_MB27_DATA1,val)
+#define bfin_read_CAN_MB27_DATA0() bfin_read16(CAN_MB27_DATA0)
+#define bfin_write_CAN_MB27_DATA0(val) bfin_write16(CAN_MB27_DATA0,val)
+
+#define bfin_read_CAN_MB28_ID1() bfin_read16(CAN_MB28_ID1)
+#define bfin_write_CAN_MB28_ID1(val) bfin_write16(CAN_MB28_ID1,val)
+#define bfin_read_CAN_MB28_ID0() bfin_read16(CAN_MB28_ID0)
+#define bfin_write_CAN_MB28_ID0(val) bfin_write16(CAN_MB28_ID0,val)
+#define bfin_read_CAN_MB28_TIMESTAMP() bfin_read16(CAN_MB28_TIMESTAMP)
+#define bfin_write_CAN_MB28_TIMESTAMP(val) bfin_write16(CAN_MB28_TIMESTAMP,val)
+#define bfin_read_CAN_MB28_LENGTH() bfin_read16(CAN_MB28_LENGTH)
+#define bfin_write_CAN_MB28_LENGTH(val) bfin_write16(CAN_MB28_LENGTH,val)
+#define bfin_read_CAN_MB28_DATA3() bfin_read16(CAN_MB28_DATA3)
+#define bfin_write_CAN_MB28_DATA3(val) bfin_write16(CAN_MB28_DATA3,val)
+#define bfin_read_CAN_MB28_DATA2() bfin_read16(CAN_MB28_DATA2)
+#define bfin_write_CAN_MB28_DATA2(val) bfin_write16(CAN_MB28_DATA2,val)
+#define bfin_read_CAN_MB28_DATA1() bfin_read16(CAN_MB28_DATA1)
+#define bfin_write_CAN_MB28_DATA1(val) bfin_write16(CAN_MB28_DATA1,val)
+#define bfin_read_CAN_MB28_DATA0() bfin_read16(CAN_MB28_DATA0)
+#define bfin_write_CAN_MB28_DATA0(val) bfin_write16(CAN_MB28_DATA0,val)
+
+#define bfin_read_CAN_MB29_ID1() bfin_read16(CAN_MB29_ID1)
+#define bfin_write_CAN_MB29_ID1(val) bfin_write16(CAN_MB29_ID1,val)
+#define bfin_read_CAN_MB29_ID0() bfin_read16(CAN_MB29_ID0)
+#define bfin_write_CAN_MB29_ID0(val) bfin_write16(CAN_MB29_ID0,val)
+#define bfin_read_CAN_MB29_TIMESTAMP() bfin_read16(CAN_MB29_TIMESTAMP)
+#define bfin_write_CAN_MB29_TIMESTAMP(val) bfin_write16(CAN_MB29_TIMESTAMP,val)
+#define bfin_read_CAN_MB29_LENGTH() bfin_read16(CAN_MB29_LENGTH)
+#define bfin_write_CAN_MB29_LENGTH(val) bfin_write16(CAN_MB29_LENGTH,val)
+#define bfin_read_CAN_MB29_DATA3() bfin_read16(CAN_MB29_DATA3)
+#define bfin_write_CAN_MB29_DATA3(val) bfin_write16(CAN_MB29_DATA3,val)
+#define bfin_read_CAN_MB29_DATA2() bfin_read16(CAN_MB29_DATA2)
+#define bfin_write_CAN_MB29_DATA2(val) bfin_write16(CAN_MB29_DATA2,val)
+#define bfin_read_CAN_MB29_DATA1() bfin_read16(CAN_MB29_DATA1)
+#define bfin_write_CAN_MB29_DATA1(val) bfin_write16(CAN_MB29_DATA1,val)
+#define bfin_read_CAN_MB29_DATA0() bfin_read16(CAN_MB29_DATA0)
+#define bfin_write_CAN_MB29_DATA0(val) bfin_write16(CAN_MB29_DATA0,val)
+
+#define bfin_read_CAN_MB30_ID1() bfin_read16(CAN_MB30_ID1)
+#define bfin_write_CAN_MB30_ID1(val) bfin_write16(CAN_MB30_ID1,val)
+#define bfin_read_CAN_MB30_ID0() bfin_read16(CAN_MB30_ID0)
+#define bfin_write_CAN_MB30_ID0(val) bfin_write16(CAN_MB30_ID0,val)
+#define bfin_read_CAN_MB30_TIMESTAMP() bfin_read16(CAN_MB30_TIMESTAMP)
+#define bfin_write_CAN_MB30_TIMESTAMP(val) bfin_write16(CAN_MB30_TIMESTAMP,val)
+#define bfin_read_CAN_MB30_LENGTH() bfin_read16(CAN_MB30_LENGTH)
+#define bfin_write_CAN_MB30_LENGTH(val) bfin_write16(CAN_MB30_LENGTH,val)
+#define bfin_read_CAN_MB30_DATA3() bfin_read16(CAN_MB30_DATA3)
+#define bfin_write_CAN_MB30_DATA3(val) bfin_write16(CAN_MB30_DATA3,val)
+#define bfin_read_CAN_MB30_DATA2() bfin_read16(CAN_MB30_DATA2)
+#define bfin_write_CAN_MB30_DATA2(val) bfin_write16(CAN_MB30_DATA2,val)
+#define bfin_read_CAN_MB30_DATA1() bfin_read16(CAN_MB30_DATA1)
+#define bfin_write_CAN_MB30_DATA1(val) bfin_write16(CAN_MB30_DATA1,val)
+#define bfin_read_CAN_MB30_DATA0() bfin_read16(CAN_MB30_DATA0)
+#define bfin_write_CAN_MB30_DATA0(val) bfin_write16(CAN_MB30_DATA0,val)
+
+#define bfin_read_CAN_MB31_ID1() bfin_read16(CAN_MB31_ID1)
+#define bfin_write_CAN_MB31_ID1(val) bfin_write16(CAN_MB31_ID1,val)
+#define bfin_read_CAN_MB31_ID0() bfin_read16(CAN_MB31_ID0)
+#define bfin_write_CAN_MB31_ID0(val) bfin_write16(CAN_MB31_ID0,val)
+#define bfin_read_CAN_MB31_TIMESTAMP() bfin_read16(CAN_MB31_TIMESTAMP)
+#define bfin_write_CAN_MB31_TIMESTAMP(val) bfin_write16(CAN_MB31_TIMESTAMP,val)
+#define bfin_read_CAN_MB31_LENGTH() bfin_read16(CAN_MB31_LENGTH)
+#define bfin_write_CAN_MB31_LENGTH(val) bfin_write16(CAN_MB31_LENGTH,val)
+#define bfin_read_CAN_MB31_DATA3() bfin_read16(CAN_MB31_DATA3)
+#define bfin_write_CAN_MB31_DATA3(val) bfin_write16(CAN_MB31_DATA3,val)
+#define bfin_read_CAN_MB31_DATA2() bfin_read16(CAN_MB31_DATA2)
+#define bfin_write_CAN_MB31_DATA2(val) bfin_write16(CAN_MB31_DATA2,val)
+#define bfin_read_CAN_MB31_DATA1() bfin_read16(CAN_MB31_DATA1)
+#define bfin_write_CAN_MB31_DATA1(val) bfin_write16(CAN_MB31_DATA1,val)
+#define bfin_read_CAN_MB31_DATA0() bfin_read16(CAN_MB31_DATA0)
+#define bfin_write_CAN_MB31_DATA0(val) bfin_write16(CAN_MB31_DATA0,val)
+
+/* CAN Mailbox Area Macros */
+#define bfin_read_CAN_MB_ID1(x)() bfin_read16(CAN_MB_ID1(x))
+#define bfin_write_CAN_MB_ID1(x)(val) bfin_write16(CAN_MB_ID1(x),val)
+#define bfin_read_CAN_MB_ID0(x)() bfin_read16(CAN_MB_ID0(x))
+#define bfin_write_CAN_MB_ID0(x)(val) bfin_write16(CAN_MB_ID0(x),val)
+#define bfin_read_CAN_MB_TIMESTAMP(x)() bfin_read16(CAN_MB_TIMESTAMP(x))
+#define bfin_write_CAN_MB_TIMESTAMP(x)(val) bfin_write16(CAN_MB_TIMESTAMP(x),val)
+#define bfin_read_CAN_MB_LENGTH(x)() bfin_read16(CAN_MB_LENGTH(x))
+#define bfin_write_CAN_MB_LENGTH(x)(val) bfin_write16(CAN_MB_LENGTH(x),val)
+#define bfin_read_CAN_MB_DATA3(x)() bfin_read16(CAN_MB_DATA3(x))
+#define bfin_write_CAN_MB_DATA3(x)(val) bfin_write16(CAN_MB_DATA3(x),val)
+#define bfin_read_CAN_MB_DATA2(x)() bfin_read16(CAN_MB_DATA2(x))
+#define bfin_write_CAN_MB_DATA2(x)(val) bfin_write16(CAN_MB_DATA2(x),val)
+#define bfin_read_CAN_MB_DATA1(x)() bfin_read16(CAN_MB_DATA1(x))
+#define bfin_write_CAN_MB_DATA1(x)(val) bfin_write16(CAN_MB_DATA1(x),val)
+#define bfin_read_CAN_MB_DATA0(x)() bfin_read16(CAN_MB_DATA0(x))
+#define bfin_write_CAN_MB_DATA0(x)(val) bfin_write16(CAN_MB_DATA0(x),val)
+
+/* Pin Control Registers (0xFFC03200 - 0xFFC032FF) */
+#define bfin_read_PORTF_FER() bfin_read16(PORTF_FER)
+#define bfin_write_PORTF_FER(val) bfin_write16(PORTF_FER,val)
+#define bfin_read_PORTG_FER() bfin_read16(PORTG_FER)
+#define bfin_write_PORTG_FER(val) bfin_write16(PORTG_FER,val)
+#define bfin_read_PORTH_FER() bfin_read16(PORTH_FER)
+#define bfin_write_PORTH_FER(val) bfin_write16(PORTH_FER,val)
+#define bfin_read_PORT_MUX() bfin_read16(BFIN_PORT_MUX)
+#define bfin_write_PORT_MUX(val) bfin_write16(BFIN_PORT_MUX,val)
+
+/* Handshake MDMA Registers (0xFFC03300 - 0xFFC033FF) */
+#define bfin_read_HMDMA0_CONTROL() bfin_read16(HMDMA0_CONTROL)
+#define bfin_write_HMDMA0_CONTROL(val) bfin_write16(HMDMA0_CONTROL,val)
+#define bfin_read_HMDMA0_ECINIT() bfin_read16(HMDMA0_ECINIT)
+#define bfin_write_HMDMA0_ECINIT(val) bfin_write16(HMDMA0_ECINIT,val)
+#define bfin_read_HMDMA0_BCINIT() bfin_read16(HMDMA0_BCINIT)
+#define bfin_write_HMDMA0_BCINIT(val) bfin_write16(HMDMA0_BCINIT,val)
+#define bfin_read_HMDMA0_ECURGENT() bfin_read16(HMDMA0_ECURGENT)
+#define bfin_write_HMDMA0_ECURGENT(val) bfin_write16(HMDMA0_ECURGENT,val)
+#define bfin_read_HMDMA0_ECOVERFLOW() bfin_read16(HMDMA0_ECOVERFLOW)
+#define bfin_write_HMDMA0_ECOVERFLOW(val) bfin_write16(HMDMA0_ECOVERFLOW,val)
+#define bfin_read_HMDMA0_ECOUNT() bfin_read16(HMDMA0_ECOUNT)
+#define bfin_write_HMDMA0_ECOUNT(val) bfin_write16(HMDMA0_ECOUNT,val)
+#define bfin_read_HMDMA0_BCOUNT() bfin_read16(HMDMA0_BCOUNT)
+#define bfin_write_HMDMA0_BCOUNT(val) bfin_write16(HMDMA0_BCOUNT,val)
+
+#define bfin_read_HMDMA1_CONTROL() bfin_read16(HMDMA1_CONTROL)
+#define bfin_write_HMDMA1_CONTROL(val) bfin_write16(HMDMA1_CONTROL,val)
+#define bfin_read_HMDMA1_ECINIT() bfin_read16(HMDMA1_ECINIT)
+#define bfin_write_HMDMA1_ECINIT(val) bfin_write16(HMDMA1_ECINIT,val)
+#define bfin_read_HMDMA1_BCINIT() bfin_read16(HMDMA1_BCINIT)
+#define bfin_write_HMDMA1_BCINIT(val) bfin_write16(HMDMA1_BCINIT,val)
+#define bfin_read_HMDMA1_ECURGENT() bfin_read16(HMDMA1_ECURGENT)
+#define bfin_write_HMDMA1_ECURGENT(val) bfin_write16(HMDMA1_ECURGENT,val)
+#define bfin_read_HMDMA1_ECOVERFLOW() bfin_read16(HMDMA1_ECOVERFLOW)
+#define bfin_write_HMDMA1_ECOVERFLOW(val) bfin_write16(HMDMA1_ECOVERFLOW,val)
+#define bfin_read_HMDMA1_ECOUNT() bfin_read16(HMDMA1_ECOUNT)
+#define bfin_write_HMDMA1_ECOUNT(val) bfin_write16(HMDMA1_ECOUNT,val)
+#define bfin_read_HMDMA1_BCOUNT() bfin_read16(HMDMA1_BCOUNT)
+#define bfin_write_HMDMA1_BCOUNT(val) bfin_write16(HMDMA1_BCOUNT,val)
+
+#endif /* _CDEF_BF534_H */
diff --git a/include/asm-blackfin/mach-bf537/cdefBF537.h b/include/asm-blackfin/mach-bf537/cdefBF537.h
new file mode 100644
index 0000000..932a1b6
--- /dev/null
+++ b/include/asm-blackfin/mach-bf537/cdefBF537.h
@@ -0,0 +1,209 @@
+/*
+ * File: include/asm-blackfin/mach-bf537/cdefBF537.h
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ * System MMR Register Map
+ * Rev:
+ *
+ * Modified:
+ *
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.
+ * If not, write to the Free Software Foundation,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef _CDEF_BF537_H
+#define _CDEF_BF537_H
+
+/* Include MMRs Common to BF534 */
+#include "cdefBF534.h"
+
+/* Include all Core registers and bit definitions */
+#include "defBF537.h"
+
+/* Include Macro "Defines" For EMAC (Unique to BF536/BF537 */
+/* 10/100 Ethernet Controller (0xFFC03000 - 0xFFC031FF) */
+#define pEMAC_OPMODE ((volatile unsigned long *)EMAC_OPMODE)
+#define bfin_read_EMAC_OPMODE() bfin_read32(EMAC_OPMODE)
+#define bfin_write_EMAC_OPMODE(val) bfin_write32(EMAC_OPMODE,val)
+#define bfin_read_EMAC_ADDRLO() bfin_read32(EMAC_ADDRLO)
+#define bfin_write_EMAC_ADDRLO(val) bfin_write32(EMAC_ADDRLO,val)
+#define bfin_read_EMAC_ADDRHI() bfin_read32(EMAC_ADDRHI)
+#define bfin_write_EMAC_ADDRHI(val) bfin_write32(EMAC_ADDRHI,val)
+#define bfin_read_EMAC_HASHLO() bfin_read32(EMAC_HASHLO)
+#define bfin_write_EMAC_HASHLO(val) bfin_write32(EMAC_HASHLO,val)
+#define bfin_read_EMAC_HASHHI() bfin_read32(EMAC_HASHHI)
+#define bfin_write_EMAC_HASHHI(val) bfin_write32(EMAC_HASHHI,val)
+#define bfin_read_EMAC_STAADD() bfin_read32(EMAC_STAADD)
+#define bfin_write_EMAC_STAADD(val) bfin_write32(EMAC_STAADD,val)
+#define bfin_read_EMAC_STADAT() bfin_read32(EMAC_STADAT)
+#define bfin_write_EMAC_STADAT(val) bfin_write32(EMAC_STADAT,val)
+#define bfin_read_EMAC_FLC() bfin_read32(EMAC_FLC)
+#define bfin_write_EMAC_FLC(val) bfin_write32(EMAC_FLC,val)
+#define bfin_read_EMAC_VLAN1() bfin_read32(EMAC_VLAN1)
+#define bfin_write_EMAC_VLAN1(val) bfin_write32(EMAC_VLAN1,val)
+#define bfin_read_EMAC_VLAN2() bfin_read32(EMAC_VLAN2)
+#define bfin_write_EMAC_VLAN2(val) bfin_write32(EMAC_VLAN2,val)
+#define bfin_read_EMAC_WKUP_CTL() bfin_read32(EMAC_WKUP_CTL)
+#define bfin_write_EMAC_WKUP_CTL(val) bfin_write32(EMAC_WKUP_CTL,val)
+#define bfin_read_EMAC_WKUP_FFMSK0() bfin_read32(EMAC_WKUP_FFMSK0)
+#define bfin_write_EMAC_WKUP_FFMSK0(val) bfin_write32(EMAC_WKUP_FFMSK0,val)
+#define bfin_read_EMAC_WKUP_FFMSK1() bfin_read32(EMAC_WKUP_FFMSK1)
+#define bfin_write_EMAC_WKUP_FFMSK1(val) bfin_write32(EMAC_WKUP_FFMSK1,val)
+#define bfin_read_EMAC_WKUP_FFMSK2() bfin_read32(EMAC_WKUP_FFMSK2)
+#define bfin_write_EMAC_WKUP_FFMSK2(val) bfin_write32(EMAC_WKUP_FFMSK2,val)
+#define bfin_read_EMAC_WKUP_FFMSK3() bfin_read32(EMAC_WKUP_FFMSK3)
+#define bfin_write_EMAC_WKUP_FFMSK3(val) bfin_write32(EMAC_WKUP_FFMSK3,val)
+#define bfin_read_EMAC_WKUP_FFCMD() bfin_read32(EMAC_WKUP_FFCMD)
+#define bfin_write_EMAC_WKUP_FFCMD(val) bfin_write32(EMAC_WKUP_FFCMD,val)
+#define bfin_read_EMAC_WKUP_FFOFF() bfin_read32(EMAC_WKUP_FFOFF)
+#define bfin_write_EMAC_WKUP_FFOFF(val) bfin_write32(EMAC_WKUP_FFOFF,val)
+#define bfin_read_EMAC_WKUP_FFCRC0() bfin_read32(EMAC_WKUP_FFCRC0)
+#define bfin_write_EMAC_WKUP_FFCRC0(val) bfin_write32(EMAC_WKUP_FFCRC0,val)
+#define bfin_read_EMAC_WKUP_FFCRC1() bfin_read32(EMAC_WKUP_FFCRC1)
+#define bfin_write_EMAC_WKUP_FFCRC1(val) bfin_write32(EMAC_WKUP_FFCRC1,val)
+
+#define pEMAC_SYSCTL ((volatile unsigned long *)EMAC_SYSCTL)
+#define bfin_read_EMAC_SYSCTL() bfin_read32(EMAC_SYSCTL)
+#define bfin_write_EMAC_SYSCTL(val) bfin_write32(EMAC_SYSCTL,val)
+#define bfin_read_EMAC_SYSTAT() bfin_read32(EMAC_SYSTAT)
+#define bfin_write_EMAC_SYSTAT(val) bfin_write32(EMAC_SYSTAT,val)
+#define bfin_read_EMAC_RX_STAT() bfin_read32(EMAC_RX_STAT)
+#define bfin_write_EMAC_RX_STAT(val) bfin_write32(EMAC_RX_STAT,val)
+#define bfin_read_EMAC_RX_STKY() bfin_read32(EMAC_RX_STKY)
+#define bfin_write_EMAC_RX_STKY(val) bfin_write32(EMAC_RX_STKY,val)
+#define bfin_read_EMAC_RX_IRQE() bfin_read32(EMAC_RX_IRQE)
+#define bfin_write_EMAC_RX_IRQE(val) bfin_write32(EMAC_RX_IRQE,val)
+#define bfin_read_EMAC_TX_STAT() bfin_read32(EMAC_TX_STAT)
+#define bfin_write_EMAC_TX_STAT(val) bfin_write32(EMAC_TX_STAT,val)
+#define bfin_read_EMAC_TX_STKY() bfin_read32(EMAC_TX_STKY)
+#define bfin_write_EMAC_TX_STKY(val) bfin_write32(EMAC_TX_STKY,val)
+#define bfin_read_EMAC_TX_IRQE() bfin_read32(EMAC_TX_IRQE)
+#define bfin_write_EMAC_TX_IRQE(val) bfin_write32(EMAC_TX_IRQE,val)
+
+#define bfin_read_EMAC_MMC_CTL() bfin_read32(EMAC_MMC_CTL)
+#define bfin_write_EMAC_MMC_CTL(val) bfin_write32(EMAC_MMC_CTL,val)
+#define bfin_read_EMAC_MMC_RIRQS() bfin_read32(EMAC_MMC_RIRQS)
+#define bfin_write_EMAC_MMC_RIRQS(val) bfin_write32(EMAC_MMC_RIRQS,val)
+#define bfin_read_EMAC_MMC_RIRQE() bfin_read32(EMAC_MMC_RIRQE)
+#define bfin_write_EMAC_MMC_RIRQE(val) bfin_write32(EMAC_MMC_RIRQE,val)
+#define bfin_read_EMAC_MMC_TIRQS() bfin_read32(EMAC_MMC_TIRQS)
+#define bfin_write_EMAC_MMC_TIRQS(val) bfin_write32(EMAC_MMC_TIRQS,val)
+#define bfin_read_EMAC_MMC_TIRQE() bfin_read32(EMAC_MMC_TIRQE)
+#define bfin_write_EMAC_MMC_TIRQE(val) bfin_write32(EMAC_MMC_TIRQE,val)
+
+#define bfin_read_EMAC_RXC_OK() bfin_read32(EMAC_RXC_OK)
+#define bfin_write_EMAC_RXC_OK(val) bfin_write32(EMAC_RXC_OK,val)
+#define bfin_read_EMAC_RXC_FCS() bfin_read32(EMAC_RXC_FCS)
+#define bfin_write_EMAC_RXC_FCS(val) bfin_write32(EMAC_RXC_FCS,val)
+#define bfin_read_EMAC_RXC_ALIGN() bfin_read32(EMAC_RXC_ALIGN)
+#define bfin_write_EMAC_RXC_ALIGN(val) bfin_write32(EMAC_RXC_ALIGN,val)
+#define bfin_read_EMAC_RXC_OCTET() bfin_read32(EMAC_RXC_OCTET)
+#define bfin_write_EMAC_RXC_OCTET(val) bfin_write32(EMAC_RXC_OCTET,val)
+#define bfin_read_EMAC_RXC_DMAOVF() bfin_read32(EMAC_RXC_DMAOVF)
+#define bfin_write_EMAC_RXC_DMAOVF(val) bfin_write32(EMAC_RXC_DMAOVF,val)
+#define bfin_read_EMAC_RXC_UNICST() bfin_read32(EMAC_RXC_UNICST)
+#define bfin_write_EMAC_RXC_UNICST(val) bfin_write32(EMAC_RXC_UNICST,val)
+#define bfin_read_EMAC_RXC_MULTI() bfin_read32(EMAC_RXC_MULTI)
+#define bfin_write_EMAC_RXC_MULTI(val) bfin_write32(EMAC_RXC_MULTI,val)
+#define bfin_read_EMAC_RXC_BROAD() bfin_read32(EMAC_RXC_BROAD)
+#define bfin_write_EMAC_RXC_BROAD(val) bfin_write32(EMAC_RXC_BROAD,val)
+#define bfin_read_EMAC_RXC_LNERRI() bfin_read32(EMAC_RXC_LNERRI)
+#define bfin_write_EMAC_RXC_LNERRI(val) bfin_write32(EMAC_RXC_LNERRI,val)
+#define bfin_read_EMAC_RXC_LNERRO() bfin_read32(EMAC_RXC_LNERRO)
+#define bfin_write_EMAC_RXC_LNERRO(val) bfin_write32(EMAC_RXC_LNERRO,val)
+#define bfin_read_EMAC_RXC_LONG() bfin_read32(EMAC_RXC_LONG)
+#define bfin_write_EMAC_RXC_LONG(val) bfin_write32(EMAC_RXC_LONG,val)
+#define bfin_read_EMAC_RXC_MACCTL() bfin_read32(EMAC_RXC_MACCTL)
+#define bfin_write_EMAC_RXC_MACCTL(val) bfin_write32(EMAC_RXC_MACCTL,val)
+#define bfin_read_EMAC_RXC_OPCODE() bfin_read32(EMAC_RXC_OPCODE)
+#define bfin_write_EMAC_RXC_OPCODE(val) bfin_write32(EMAC_RXC_OPCODE,val)
+#define bfin_read_EMAC_RXC_PAUSE() bfin_read32(EMAC_RXC_PAUSE)
+#define bfin_write_EMAC_RXC_PAUSE(val) bfin_write32(EMAC_RXC_PAUSE,val)
+#define bfin_read_EMAC_RXC_ALLFRM() bfin_read32(EMAC_RXC_ALLFRM)
+#define bfin_write_EMAC_RXC_ALLFRM(val) bfin_write32(EMAC_RXC_ALLFRM,val)
+#define bfin_read_EMAC_RXC_ALLOCT() bfin_read32(EMAC_RXC_ALLOCT)
+#define bfin_write_EMAC_RXC_ALLOCT(val) bfin_write32(EMAC_RXC_ALLOCT,val)
+#define bfin_read_EMAC_RXC_TYPED() bfin_read32(EMAC_RXC_TYPED)
+#define bfin_write_EMAC_RXC_TYPED(val) bfin_write32(EMAC_RXC_TYPED,val)
+#define bfin_read_EMAC_RXC_SHORT() bfin_read32(EMAC_RXC_SHORT)
+#define bfin_write_EMAC_RXC_SHORT(val) bfin_write32(EMAC_RXC_SHORT,val)
+#define bfin_read_EMAC_RXC_EQ64() bfin_read32(EMAC_RXC_EQ64)
+#define bfin_write_EMAC_RXC_EQ64(val) bfin_write32(EMAC_RXC_EQ64,val)
+#define pEMAC_RXC_LT128 ((volatile unsigned long *)EMAC_RXC_LT128)
+#define bfin_read_EMAC_RXC_LT128() bfin_read32(EMAC_RXC_LT128)
+#define bfin_write_EMAC_RXC_LT128(val) bfin_write32(EMAC_RXC_LT128,val)
+#define bfin_read_EMAC_RXC_LT256() bfin_read32(EMAC_RXC_LT256)
+#define bfin_write_EMAC_RXC_LT256(val) bfin_write32(EMAC_RXC_LT256,val)
+#define bfin_read_EMAC_RXC_LT512() bfin_read32(EMAC_RXC_LT512)
+#define bfin_write_EMAC_RXC_LT512(val) bfin_write32(EMAC_RXC_LT512,val)
+#define bfin_read_EMAC_RXC_LT1024() bfin_read32(EMAC_RXC_LT1024)
+#define bfin_write_EMAC_RXC_LT1024(val) bfin_write32(EMAC_RXC_LT1024,val)
+#define bfin_read_EMAC_RXC_GE1024() bfin_read32(EMAC_RXC_GE1024)
+#define bfin_write_EMAC_RXC_GE1024(val) bfin_write32(EMAC_RXC_GE1024,val)
+
+#define bfin_read_EMAC_TXC_OK() bfin_read32(EMAC_TXC_OK)
+#define bfin_write_EMAC_TXC_OK(val) bfin_write32(EMAC_TXC_OK,val)
+#define bfin_read_EMAC_TXC_1COL() bfin_read32(EMAC_TXC_1COL)
+#define bfin_write_EMAC_TXC_1COL(val) bfin_write32(EMAC_TXC_1COL,val)
+#define bfin_read_EMAC_TXC_GT1COL() bfin_read32(EMAC_TXC_GT1COL)
+#define bfin_write_EMAC_TXC_GT1COL(val) bfin_write32(EMAC_TXC_GT1COL,val)
+#define bfin_read_EMAC_TXC_OCTET() bfin_read32(EMAC_TXC_OCTET)
+#define bfin_write_EMAC_TXC_OCTET(val) bfin_write32(EMAC_TXC_OCTET,val)
+#define bfin_read_EMAC_TXC_DEFER() bfin_read32(EMAC_TXC_DEFER)
+#define bfin_write_EMAC_TXC_DEFER(val) bfin_write32(EMAC_TXC_DEFER,val)
+#define bfin_read_EMAC_TXC_LATECL() bfin_read32(EMAC_TXC_LATECL)
+#define bfin_write_EMAC_TXC_LATECL(val) bfin_write32(EMAC_TXC_LATECL,val)
+#define bfin_read_EMAC_TXC_XS_COL() bfin_read32(EMAC_TXC_XS_COL)
+#define bfin_write_EMAC_TXC_XS_COL(val) bfin_write32(EMAC_TXC_XS_COL,val)
+#define bfin_read_EMAC_TXC_DMAUND() bfin_read32(EMAC_TXC_DMAUND)
+#define bfin_write_EMAC_TXC_DMAUND(val) bfin_write32(EMAC_TXC_DMAUND,val)
+#define bfin_read_EMAC_TXC_CRSERR() bfin_read32(EMAC_TXC_CRSERR)
+#define bfin_write_EMAC_TXC_CRSERR(val) bfin_write32(EMAC_TXC_CRSERR,val)
+#define bfin_read_EMAC_TXC_UNICST() bfin_read32(EMAC_TXC_UNICST)
+#define bfin_write_EMAC_TXC_UNICST(val) bfin_write32(EMAC_TXC_UNICST,val)
+#define bfin_read_EMAC_TXC_MULTI() bfin_read32(EMAC_TXC_MULTI)
+#define bfin_write_EMAC_TXC_MULTI(val) bfin_write32(EMAC_TXC_MULTI,val)
+#define bfin_read_EMAC_TXC_BROAD() bfin_read32(EMAC_TXC_BROAD)
+#define bfin_write_EMAC_TXC_BROAD(val) bfin_write32(EMAC_TXC_BROAD,val)
+#define bfin_read_EMAC_TXC_XS_DFR() bfin_read32(EMAC_TXC_XS_DFR)
+#define bfin_write_EMAC_TXC_XS_DFR(val) bfin_write32(EMAC_TXC_XS_DFR,val)
+#define bfin_read_EMAC_TXC_MACCTL() bfin_read32(EMAC_TXC_MACCTL)
+#define bfin_write_EMAC_TXC_MACCTL(val) bfin_write32(EMAC_TXC_MACCTL,val)
+#define bfin_read_EMAC_TXC_ALLFRM() bfin_read32(EMAC_TXC_ALLFRM)
+#define bfin_write_EMAC_TXC_ALLFRM(val) bfin_write32(EMAC_TXC_ALLFRM,val)
+#define bfin_read_EMAC_TXC_ALLOCT() bfin_read32(EMAC_TXC_ALLOCT)
+#define bfin_write_EMAC_TXC_ALLOCT(val) bfin_write32(EMAC_TXC_ALLOCT,val)
+#define bfin_read_EMAC_TXC_EQ64() bfin_read32(EMAC_TXC_EQ64)
+#define bfin_write_EMAC_TXC_EQ64(val) bfin_write32(EMAC_TXC_EQ64,val)
+#define bfin_read_EMAC_TXC_LT128() bfin_read32(EMAC_TXC_LT128)
+#define bfin_write_EMAC_TXC_LT128(val) bfin_write32(EMAC_TXC_LT128,val)
+#define bfin_read_EMAC_TXC_LT256() bfin_read32(EMAC_TXC_LT256)
+#define bfin_write_EMAC_TXC_LT256(val) bfin_write32(EMAC_TXC_LT256,val)
+#define bfin_read_EMAC_TXC_LT512() bfin_read32(EMAC_TXC_LT512)
+#define bfin_write_EMAC_TXC_LT512(val) bfin_write32(EMAC_TXC_LT512,val)
+#define bfin_read_EMAC_TXC_LT1024() bfin_read32(EMAC_TXC_LT1024)
+#define bfin_write_EMAC_TXC_LT1024(val) bfin_write32(EMAC_TXC_LT1024,val)
+#define bfin_read_EMAC_TXC_GE1024() bfin_read32(EMAC_TXC_GE1024)
+#define bfin_write_EMAC_TXC_GE1024(val) bfin_write32(EMAC_TXC_GE1024,val)
+#define bfin_read_EMAC_TXC_ABORT() bfin_read32(EMAC_TXC_ABORT)
+#define bfin_write_EMAC_TXC_ABORT(val) bfin_write32(EMAC_TXC_ABORT,val)
+
+#endif /* _CDEF_BF537_H */
diff --git a/include/asm-blackfin/mach-bf537/defBF534.h b/include/asm-blackfin/mach-bf537/defBF534.h
new file mode 100644
index 0000000..e605e970
--- /dev/null
+++ b/include/asm-blackfin/mach-bf537/defBF534.h
@@ -0,0 +1,2501 @@
+/*
+ * File: include/asm-blackfin/mach-bf537/cdefBF537.h
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Rev:
+ *
+ * Modified:
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.
+ * If not, write to the Free Software Foundation,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef _DEF_BF534_H
+#define _DEF_BF534_H
+
+/* Include all Core registers and bit definitions */
+#include <asm/mach-common/def_LPBlackfin.h>
+
+/************************************************************************************
+** System MMR Register Map
+*************************************************************************************/
+/* Clock and System Control (0xFFC00000 - 0xFFC000FF) */
+#define PLL_CTL 0xFFC00000 /* PLL Control Register */
+#define PLL_DIV 0xFFC00004 /* PLL Divide Register */
+#define VR_CTL 0xFFC00008 /* Voltage Regulator Control Register */
+#define PLL_STAT 0xFFC0000C /* PLL Status Register */
+#define PLL_LOCKCNT 0xFFC00010 /* PLL Lock Count Register */
+#define CHIPID 0xFFC00014 /* Chip ID Register */
+
+/* System Interrupt Controller (0xFFC00100 - 0xFFC001FF) */
+#define SWRST 0xFFC00100 /* Software Reset Register */
+#define SYSCR 0xFFC00104 /* System Configuration Register */
+#define SIC_RVECT 0xFFC00108 /* Interrupt Reset Vector Address Register */
+#define SIC_IMASK 0xFFC0010C /* Interrupt Mask Register */
+#define SIC_IAR0 0xFFC00110 /* Interrupt Assignment Register 0 */
+#define SIC_IAR1 0xFFC00114 /* Interrupt Assignment Register 1 */
+#define SIC_IAR2 0xFFC00118 /* Interrupt Assignment Register 2 */
+#define SIC_IAR3 0xFFC0011C /* Interrupt Assignment Register 3 */
+#define SIC_ISR 0xFFC00120 /* Interrupt Status Register */
+#define SIC_IWR 0xFFC00124 /* Interrupt Wakeup Register */
+
+/* Watchdog Timer (0xFFC00200 - 0xFFC002FF) */
+#define WDOG_CTL 0xFFC00200 /* Watchdog Control Register */
+#define WDOG_CNT 0xFFC00204 /* Watchdog Count Register */
+#define WDOG_STAT 0xFFC00208 /* Watchdog Status Register */
+
+/* Real Time Clock (0xFFC00300 - 0xFFC003FF) */
+#define RTC_STAT 0xFFC00300 /* RTC Status Register */
+#define RTC_ICTL 0xFFC00304 /* RTC Interrupt Control Register */
+#define RTC_ISTAT 0xFFC00308 /* RTC Interrupt Status Register */
+#define RTC_SWCNT 0xFFC0030C /* RTC Stopwatch Count Register */
+#define RTC_ALARM 0xFFC00310 /* RTC Alarm Time Register */
+#define RTC_FAST 0xFFC00314 /* RTC Prescaler Enable Register */
+#define RTC_PREN 0xFFC00314 /* RTC Prescaler Enable Alternate Macro */
+
+/* UART0 Controller (0xFFC00400 - 0xFFC004FF) */
+#define UART0_THR 0xFFC00400 /* Transmit Holding register */
+#define UART0_RBR 0xFFC00400 /* Receive Buffer register */
+#define UART0_DLL 0xFFC00400 /* Divisor Latch (Low-Byte) */
+#define UART0_IER 0xFFC00404 /* Interrupt Enable Register */
+#define UART0_DLH 0xFFC00404 /* Divisor Latch (High-Byte) */
+#define UART0_IIR 0xFFC00408 /* Interrupt Identification Register */
+#define UART0_LCR 0xFFC0040C /* Line Control Register */
+#define UART0_MCR 0xFFC00410 /* Modem Control Register */
+#define UART0_LSR 0xFFC00414 /* Line Status Register */
+#define UART0_MSR 0xFFC00418 /* Modem Status Register */
+#define UART0_SCR 0xFFC0041C /* SCR Scratch Register */
+#define UART0_GCTL 0xFFC00424 /* Global Control Register */
+
+/* SPI Controller (0xFFC00500 - 0xFFC005FF) */
+#define SPI_CTL 0xFFC00500 /* SPI Control Register */
+#define SPI_FLG 0xFFC00504 /* SPI Flag register */
+#define SPI_STAT 0xFFC00508 /* SPI Status register */
+#define SPI_TDBR 0xFFC0050C /* SPI Transmit Data Buffer Register */
+#define SPI_RDBR 0xFFC00510 /* SPI Receive Data Buffer Register */
+#define SPI_BAUD 0xFFC00514 /* SPI Baud rate Register */
+#define SPI_SHADOW 0xFFC00518 /* SPI_RDBR Shadow Register */
+
+/* TIMER0-7 Registers (0xFFC00600 - 0xFFC006FF) */
+#define TIMER0_CONFIG 0xFFC00600 /* Timer 0 Configuration Register */
+#define TIMER0_COUNTER 0xFFC00604 /* Timer 0 Counter Register */
+#define TIMER0_PERIOD 0xFFC00608 /* Timer 0 Period Register */
+#define TIMER0_WIDTH 0xFFC0060C /* Timer 0 Width Register */
+
+#define TIMER1_CONFIG 0xFFC00610 /* Timer 1 Configuration Register */
+#define TIMER1_COUNTER 0xFFC00614 /* Timer 1 Counter Register */
+#define TIMER1_PERIOD 0xFFC00618 /* Timer 1 Period Register */
+#define TIMER1_WIDTH 0xFFC0061C /* Timer 1 Width Register */
+
+#define TIMER2_CONFIG 0xFFC00620 /* Timer 2 Configuration Register */
+#define TIMER2_COUNTER 0xFFC00624 /* Timer 2 Counter Register */
+#define TIMER2_PERIOD 0xFFC00628 /* Timer 2 Period Register */
+#define TIMER2_WIDTH 0xFFC0062C /* Timer 2 Width Register */
+
+#define TIMER3_CONFIG 0xFFC00630 /* Timer 3 Configuration Register */
+#define TIMER3_COUNTER 0xFFC00634 /* Timer 3 Counter Register */
+#define TIMER3_PERIOD 0xFFC00638 /* Timer 3 Period Register */
+#define TIMER3_WIDTH 0xFFC0063C /* Timer 3 Width Register */
+
+#define TIMER4_CONFIG 0xFFC00640 /* Timer 4 Configuration Register */
+#define TIMER4_COUNTER 0xFFC00644 /* Timer 4 Counter Register */
+#define TIMER4_PERIOD 0xFFC00648 /* Timer 4 Period Register */
+#define TIMER4_WIDTH 0xFFC0064C /* Timer 4 Width Register */
+
+#define TIMER5_CONFIG 0xFFC00650 /* Timer 5 Configuration Register */
+#define TIMER5_COUNTER 0xFFC00654 /* Timer 5 Counter Register */
+#define TIMER5_PERIOD 0xFFC00658 /* Timer 5 Period Register */
+#define TIMER5_WIDTH 0xFFC0065C /* Timer 5 Width Register */
+
+#define TIMER6_CONFIG 0xFFC00660 /* Timer 6 Configuration Register */
+#define TIMER6_COUNTER 0xFFC00664 /* Timer 6 Counter Register */
+#define TIMER6_PERIOD 0xFFC00668 /* Timer 6 Period Register */
+#define TIMER6_WIDTH 0xFFC0066C /* Timer 6 Width Register */
+
+#define TIMER7_CONFIG 0xFFC00670 /* Timer 7 Configuration Register */
+#define TIMER7_COUNTER 0xFFC00674 /* Timer 7 Counter Register */
+#define TIMER7_PERIOD 0xFFC00678 /* Timer 7 Period Register */
+#define TIMER7_WIDTH 0xFFC0067C /* Timer 7 Width Register */
+
+#define TIMER_ENABLE 0xFFC00680 /* Timer Enable Register */
+#define TIMER_DISABLE 0xFFC00684 /* Timer Disable Register */
+#define TIMER_STATUS 0xFFC00688 /* Timer Status Register */
+
+/* General Purpose I/O Port F (0xFFC00700 - 0xFFC007FF) */
+#define PORTFIO 0xFFC00700 /* Port F I/O Pin State Specify Register */
+#define PORTFIO_CLEAR 0xFFC00704 /* Port F I/O Peripheral Interrupt Clear Register */
+#define PORTFIO_SET 0xFFC00708 /* Port F I/O Peripheral Interrupt Set Register */
+#define PORTFIO_TOGGLE 0xFFC0070C /* Port F I/O Pin State Toggle Register */
+#define PORTFIO_MASKA 0xFFC00710 /* Port F I/O Mask State Specify Interrupt A Register */
+#define PORTFIO_MASKA_CLEAR 0xFFC00714 /* Port F I/O Mask Disable Interrupt A Register */
+#define PORTFIO_MASKA_SET 0xFFC00718 /* Port F I/O Mask Enable Interrupt A Register */
+#define PORTFIO_MASKA_TOGGLE 0xFFC0071C /* Port F I/O Mask Toggle Enable Interrupt A Register */
+#define PORTFIO_MASKB 0xFFC00720 /* Port F I/O Mask State Specify Interrupt B Register */
+#define PORTFIO_MASKB_CLEAR 0xFFC00724 /* Port F I/O Mask Disable Interrupt B Register */
+#define PORTFIO_MASKB_SET 0xFFC00728 /* Port F I/O Mask Enable Interrupt B Register */
+#define PORTFIO_MASKB_TOGGLE 0xFFC0072C /* Port F I/O Mask Toggle Enable Interrupt B Register */
+#define PORTFIO_DIR 0xFFC00730 /* Port F I/O Direction Register */
+#define PORTFIO_POLAR 0xFFC00734 /* Port F I/O Source Polarity Register */
+#define PORTFIO_EDGE 0xFFC00738 /* Port F I/O Source Sensitivity Register */
+#define PORTFIO_BOTH 0xFFC0073C /* Port F I/O Set on BOTH Edges Register */
+#define PORTFIO_INEN 0xFFC00740 /* Port F I/O Input Enable Register */
+
+/* SPORT0 Controller (0xFFC00800 - 0xFFC008FF) */
+#define SPORT0_TCR1 0xFFC00800 /* SPORT0 Transmit Configuration 1 Register */
+#define SPORT0_TCR2 0xFFC00804 /* SPORT0 Transmit Configuration 2 Register */
+#define SPORT0_TCLKDIV 0xFFC00808 /* SPORT0 Transmit Clock Divider */
+#define SPORT0_TFSDIV 0xFFC0080C /* SPORT0 Transmit Frame Sync Divider */
+#define SPORT0_TX 0xFFC00810 /* SPORT0 TX Data Register */
+#define SPORT0_RX 0xFFC00818 /* SPORT0 RX Data Register */
+#define SPORT0_RCR1 0xFFC00820 /* SPORT0 Transmit Configuration 1 Register */
+#define SPORT0_RCR2 0xFFC00824 /* SPORT0 Transmit Configuration 2 Register */
+#define SPORT0_RCLKDIV 0xFFC00828 /* SPORT0 Receive Clock Divider */
+#define SPORT0_RFSDIV 0xFFC0082C /* SPORT0 Receive Frame Sync Divider */
+#define SPORT0_STAT 0xFFC00830 /* SPORT0 Status Register */
+#define SPORT0_CHNL 0xFFC00834 /* SPORT0 Current Channel Register */
+#define SPORT0_MCMC1 0xFFC00838 /* SPORT0 Multi-Channel Configuration Register 1 */
+#define SPORT0_MCMC2 0xFFC0083C /* SPORT0 Multi-Channel Configuration Register 2 */
+#define SPORT0_MTCS0 0xFFC00840 /* SPORT0 Multi-Channel Transmit Select Register 0 */
+#define SPORT0_MTCS1 0xFFC00844 /* SPORT0 Multi-Channel Transmit Select Register 1 */
+#define SPORT0_MTCS2 0xFFC00848 /* SPORT0 Multi-Channel Transmit Select Register 2 */
+#define SPORT0_MTCS3 0xFFC0084C /* SPORT0 Multi-Channel Transmit Select Register 3 */
+#define SPORT0_MRCS0 0xFFC00850 /* SPORT0 Multi-Channel Receive Select Register 0 */
+#define SPORT0_MRCS1 0xFFC00854 /* SPORT0 Multi-Channel Receive Select Register 1 */
+#define SPORT0_MRCS2 0xFFC00858 /* SPORT0 Multi-Channel Receive Select Register 2 */
+#define SPORT0_MRCS3 0xFFC0085C /* SPORT0 Multi-Channel Receive Select Register 3 */
+
+/* SPORT1 Controller (0xFFC00900 - 0xFFC009FF) */
+#define SPORT1_TCR1 0xFFC00900 /* SPORT1 Transmit Configuration 1 Register */
+#define SPORT1_TCR2 0xFFC00904 /* SPORT1 Transmit Configuration 2 Register */
+#define SPORT1_TCLKDIV 0xFFC00908 /* SPORT1 Transmit Clock Divider */
+#define SPORT1_TFSDIV 0xFFC0090C /* SPORT1 Transmit Frame Sync Divider */
+#define SPORT1_TX 0xFFC00910 /* SPORT1 TX Data Register */
+#define SPORT1_RX 0xFFC00918 /* SPORT1 RX Data Register */
+#define SPORT1_RCR1 0xFFC00920 /* SPORT1 Transmit Configuration 1 Register */
+#define SPORT1_RCR2 0xFFC00924 /* SPORT1 Transmit Configuration 2 Register */
+#define SPORT1_RCLKDIV 0xFFC00928 /* SPORT1 Receive Clock Divider */
+#define SPORT1_RFSDIV 0xFFC0092C /* SPORT1 Receive Frame Sync Divider */
+#define SPORT1_STAT 0xFFC00930 /* SPORT1 Status Register */
+#define SPORT1_CHNL 0xFFC00934 /* SPORT1 Current Channel Register */
+#define SPORT1_MCMC1 0xFFC00938 /* SPORT1 Multi-Channel Configuration Register 1 */
+#define SPORT1_MCMC2 0xFFC0093C /* SPORT1 Multi-Channel Configuration Register 2 */
+#define SPORT1_MTCS0 0xFFC00940 /* SPORT1 Multi-Channel Transmit Select Register 0 */
+#define SPORT1_MTCS1 0xFFC00944 /* SPORT1 Multi-Channel Transmit Select Register 1 */
+#define SPORT1_MTCS2 0xFFC00948 /* SPORT1 Multi-Channel Transmit Select Register 2 */
+#define SPORT1_MTCS3 0xFFC0094C /* SPORT1 Multi-Channel Transmit Select Register 3 */
+#define SPORT1_MRCS0 0xFFC00950 /* SPORT1 Multi-Channel Receive Select Register 0 */
+#define SPORT1_MRCS1 0xFFC00954 /* SPORT1 Multi-Channel Receive Select Register 1 */
+#define SPORT1_MRCS2 0xFFC00958 /* SPORT1 Multi-Channel Receive Select Register 2 */
+#define SPORT1_MRCS3 0xFFC0095C /* SPORT1 Multi-Channel Receive Select Register 3 */
+
+/* External Bus Interface Unit (0xFFC00A00 - 0xFFC00AFF) */
+#define EBIU_AMGCTL 0xFFC00A00 /* Asynchronous Memory Global Control Register */
+#define EBIU_AMBCTL0 0xFFC00A04 /* Asynchronous Memory Bank Control Register 0 */
+#define EBIU_AMBCTL1 0xFFC00A08 /* Asynchronous Memory Bank Control Register 1 */
+#define EBIU_SDGCTL 0xFFC00A10 /* SDRAM Global Control Register */
+#define EBIU_SDBCTL 0xFFC00A14 /* SDRAM Bank Control Register */
+#define EBIU_SDRRC 0xFFC00A18 /* SDRAM Refresh Rate Control Register */
+#define EBIU_SDSTAT 0xFFC00A1C /* SDRAM Status Register */
+
+/* DMA Traffic Control Registers */
+#define DMA_TCPER 0xFFC00B0C /* Traffic Control Periods Register */
+#define DMA_TCCNT 0xFFC00B10 /* Traffic Control Current Counts Register */
+
+/* DMA Controller (0xFFC00C00 - 0xFFC00FFF) */
+#define DMA0_NEXT_DESC_PTR 0xFFC00C00 /* DMA Channel 0 Next Descriptor Pointer Register */
+#define DMA0_START_ADDR 0xFFC00C04 /* DMA Channel 0 Start Address Register */
+#define DMA0_CONFIG 0xFFC00C08 /* DMA Channel 0 Configuration Register */
+#define DMA0_X_COUNT 0xFFC00C10 /* DMA Channel 0 X Count Register */
+#define DMA0_X_MODIFY 0xFFC00C14 /* DMA Channel 0 X Modify Register */
+#define DMA0_Y_COUNT 0xFFC00C18 /* DMA Channel 0 Y Count Register */
+#define DMA0_Y_MODIFY 0xFFC00C1C /* DMA Channel 0 Y Modify Register */
+#define DMA0_CURR_DESC_PTR 0xFFC00C20 /* DMA Channel 0 Current Descriptor Pointer Register */
+#define DMA0_CURR_ADDR 0xFFC00C24 /* DMA Channel 0 Current Address Register */
+#define DMA0_IRQ_STATUS 0xFFC00C28 /* DMA Channel 0 Interrupt/Status Register */
+#define DMA0_PERIPHERAL_MAP 0xFFC00C2C /* DMA Channel 0 Peripheral Map Register */
+#define DMA0_CURR_X_COUNT 0xFFC00C30 /* DMA Channel 0 Current X Count Register */
+#define DMA0_CURR_Y_COUNT 0xFFC00C38 /* DMA Channel 0 Current Y Count Register */
+
+#define DMA1_NEXT_DESC_PTR 0xFFC00C40 /* DMA Channel 1 Next Descriptor Pointer Register */
+#define DMA1_START_ADDR 0xFFC00C44 /* DMA Channel 1 Start Address Register */
+#define DMA1_CONFIG 0xFFC00C48 /* DMA Channel 1 Configuration Register */
+#define DMA1_X_COUNT 0xFFC00C50 /* DMA Channel 1 X Count Register */
+#define DMA1_X_MODIFY 0xFFC00C54 /* DMA Channel 1 X Modify Register */
+#define DMA1_Y_COUNT 0xFFC00C58 /* DMA Channel 1 Y Count Register */
+#define DMA1_Y_MODIFY 0xFFC00C5C /* DMA Channel 1 Y Modify Register */
+#define DMA1_CURR_DESC_PTR 0xFFC00C60 /* DMA Channel 1 Current Descriptor Pointer Register */
+#define DMA1_CURR_ADDR 0xFFC00C64 /* DMA Channel 1 Current Address Register */
+#define DMA1_IRQ_STATUS 0xFFC00C68 /* DMA Channel 1 Interrupt/Status Register */
+#define DMA1_PERIPHERAL_MAP 0xFFC00C6C /* DMA Channel 1 Peripheral Map Register */
+#define DMA1_CURR_X_COUNT 0xFFC00C70 /* DMA Channel 1 Current X Count Register */
+#define DMA1_CURR_Y_COUNT 0xFFC00C78 /* DMA Channel 1 Current Y Count Register */
+
+#define DMA2_NEXT_DESC_PTR 0xFFC00C80 /* DMA Channel 2 Next Descriptor Pointer Register */
+#define DMA2_START_ADDR 0xFFC00C84 /* DMA Channel 2 Start Address Register */
+#define DMA2_CONFIG 0xFFC00C88 /* DMA Channel 2 Configuration Register */
+#define DMA2_X_COUNT 0xFFC00C90 /* DMA Channel 2 X Count Register */
+#define DMA2_X_MODIFY 0xFFC00C94 /* DMA Channel 2 X Modify Register */
+#define DMA2_Y_COUNT 0xFFC00C98 /* DMA Channel 2 Y Count Register */
+#define DMA2_Y_MODIFY 0xFFC00C9C /* DMA Channel 2 Y Modify Register */
+#define DMA2_CURR_DESC_PTR 0xFFC00CA0 /* DMA Channel 2 Current Descriptor Pointer Register */
+#define DMA2_CURR_ADDR 0xFFC00CA4 /* DMA Channel 2 Current Address Register */
+#define DMA2_IRQ_STATUS 0xFFC00CA8 /* DMA Channel 2 Interrupt/Status Register */
+#define DMA2_PERIPHERAL_MAP 0xFFC00CAC /* DMA Channel 2 Peripheral Map Register */
+#define DMA2_CURR_X_COUNT 0xFFC00CB0 /* DMA Channel 2 Current X Count Register */
+#define DMA2_CURR_Y_COUNT 0xFFC00CB8 /* DMA Channel 2 Current Y Count Register */
+
+#define DMA3_NEXT_DESC_PTR 0xFFC00CC0 /* DMA Channel 3 Next Descriptor Pointer Register */
+#define DMA3_START_ADDR 0xFFC00CC4 /* DMA Channel 3 Start Address Register */
+#define DMA3_CONFIG 0xFFC00CC8 /* DMA Channel 3 Configuration Register */
+#define DMA3_X_COUNT 0xFFC00CD0 /* DMA Channel 3 X Count Register */
+#define DMA3_X_MODIFY 0xFFC00CD4 /* DMA Channel 3 X Modify Register */
+#define DMA3_Y_COUNT 0xFFC00CD8 /* DMA Channel 3 Y Count Register */
+#define DMA3_Y_MODIFY 0xFFC00CDC /* DMA Channel 3 Y Modify Register */
+#define DMA3_CURR_DESC_PTR 0xFFC00CE0 /* DMA Channel 3 Current Descriptor Pointer Register */
+#define DMA3_CURR_ADDR 0xFFC00CE4 /* DMA Channel 3 Current Address Register */
+#define DMA3_IRQ_STATUS 0xFFC00CE8 /* DMA Channel 3 Interrupt/Status Register */
+#define DMA3_PERIPHERAL_MAP 0xFFC00CEC /* DMA Channel 3 Peripheral Map Register */
+#define DMA3_CURR_X_COUNT 0xFFC00CF0 /* DMA Channel 3 Current X Count Register */
+#define DMA3_CURR_Y_COUNT 0xFFC00CF8 /* DMA Channel 3 Current Y Count Register */
+
+#define DMA4_NEXT_DESC_PTR 0xFFC00D00 /* DMA Channel 4 Next Descriptor Pointer Register */
+#define DMA4_START_ADDR 0xFFC00D04 /* DMA Channel 4 Start Address Register */
+#define DMA4_CONFIG 0xFFC00D08 /* DMA Channel 4 Configuration Register */
+#define DMA4_X_COUNT 0xFFC00D10 /* DMA Channel 4 X Count Register */
+#define DMA4_X_MODIFY 0xFFC00D14 /* DMA Channel 4 X Modify Register */
+#define DMA4_Y_COUNT 0xFFC00D18 /* DMA Channel 4 Y Count Register */
+#define DMA4_Y_MODIFY 0xFFC00D1C /* DMA Channel 4 Y Modify Register */
+#define DMA4_CURR_DESC_PTR 0xFFC00D20 /* DMA Channel 4 Current Descriptor Pointer Register */
+#define DMA4_CURR_ADDR 0xFFC00D24 /* DMA Channel 4 Current Address Register */
+#define DMA4_IRQ_STATUS 0xFFC00D28 /* DMA Channel 4 Interrupt/Status Register */
+#define DMA4_PERIPHERAL_MAP 0xFFC00D2C /* DMA Channel 4 Peripheral Map Register */
+#define DMA4_CURR_X_COUNT 0xFFC00D30 /* DMA Channel 4 Current X Count Register */
+#define DMA4_CURR_Y_COUNT 0xFFC00D38 /* DMA Channel 4 Current Y Count Register */
+
+#define DMA5_NEXT_DESC_PTR 0xFFC00D40 /* DMA Channel 5 Next Descriptor Pointer Register */
+#define DMA5_START_ADDR 0xFFC00D44 /* DMA Channel 5 Start Address Register */
+#define DMA5_CONFIG 0xFFC00D48 /* DMA Channel 5 Configuration Register */
+#define DMA5_X_COUNT 0xFFC00D50 /* DMA Channel 5 X Count Register */
+#define DMA5_X_MODIFY 0xFFC00D54 /* DMA Channel 5 X Modify Register */
+#define DMA5_Y_COUNT 0xFFC00D58 /* DMA Channel 5 Y Count Register */
+#define DMA5_Y_MODIFY 0xFFC00D5C /* DMA Channel 5 Y Modify Register */
+#define DMA5_CURR_DESC_PTR 0xFFC00D60 /* DMA Channel 5 Current Descriptor Pointer Register */
+#define DMA5_CURR_ADDR 0xFFC00D64 /* DMA Channel 5 Current Address Register */
+#define DMA5_IRQ_STATUS 0xFFC00D68 /* DMA Channel 5 Interrupt/Status Register */
+#define DMA5_PERIPHERAL_MAP 0xFFC00D6C /* DMA Channel 5 Peripheral Map Register */
+#define DMA5_CURR_X_COUNT 0xFFC00D70 /* DMA Channel 5 Current X Count Register */
+#define DMA5_CURR_Y_COUNT 0xFFC00D78 /* DMA Channel 5 Current Y Count Register */
+
+#define DMA6_NEXT_DESC_PTR 0xFFC00D80 /* DMA Channel 6 Next Descriptor Pointer Register */
+#define DMA6_START_ADDR 0xFFC00D84 /* DMA Channel 6 Start Address Register */
+#define DMA6_CONFIG 0xFFC00D88 /* DMA Channel 6 Configuration Register */
+#define DMA6_X_COUNT 0xFFC00D90 /* DMA Channel 6 X Count Register */
+#define DMA6_X_MODIFY 0xFFC00D94 /* DMA Channel 6 X Modify Register */
+#define DMA6_Y_COUNT 0xFFC00D98 /* DMA Channel 6 Y Count Register */
+#define DMA6_Y_MODIFY 0xFFC00D9C /* DMA Channel 6 Y Modify Register */
+#define DMA6_CURR_DESC_PTR 0xFFC00DA0 /* DMA Channel 6 Current Descriptor Pointer Register */
+#define DMA6_CURR_ADDR 0xFFC00DA4 /* DMA Channel 6 Current Address Register */
+#define DMA6_IRQ_STATUS 0xFFC00DA8 /* DMA Channel 6 Interrupt/Status Register */
+#define DMA6_PERIPHERAL_MAP 0xFFC00DAC /* DMA Channel 6 Peripheral Map Register */
+#define DMA6_CURR_X_COUNT 0xFFC00DB0 /* DMA Channel 6 Current X Count Register */
+#define DMA6_CURR_Y_COUNT 0xFFC00DB8 /* DMA Channel 6 Current Y Count Register */
+
+#define DMA7_NEXT_DESC_PTR 0xFFC00DC0 /* DMA Channel 7 Next Descriptor Pointer Register */
+#define DMA7_START_ADDR 0xFFC00DC4 /* DMA Channel 7 Start Address Register */
+#define DMA7_CONFIG 0xFFC00DC8 /* DMA Channel 7 Configuration Register */
+#define DMA7_X_COUNT 0xFFC00DD0 /* DMA Channel 7 X Count Register */
+#define DMA7_X_MODIFY 0xFFC00DD4 /* DMA Channel 7 X Modify Register */
+#define DMA7_Y_COUNT 0xFFC00DD8 /* DMA Channel 7 Y Count Register */
+#define DMA7_Y_MODIFY 0xFFC00DDC /* DMA Channel 7 Y Modify Register */
+#define DMA7_CURR_DESC_PTR 0xFFC00DE0 /* DMA Channel 7 Current Descriptor Pointer Register */
+#define DMA7_CURR_ADDR 0xFFC00DE4 /* DMA Channel 7 Current Address Register */
+#define DMA7_IRQ_STATUS 0xFFC00DE8 /* DMA Channel 7 Interrupt/Status Register */
+#define DMA7_PERIPHERAL_MAP 0xFFC00DEC /* DMA Channel 7 Peripheral Map Register */
+#define DMA7_CURR_X_COUNT 0xFFC00DF0 /* DMA Channel 7 Current X Count Register */
+#define DMA7_CURR_Y_COUNT 0xFFC00DF8 /* DMA Channel 7 Current Y Count Register */
+
+#define DMA8_NEXT_DESC_PTR 0xFFC00E00 /* DMA Channel 8 Next Descriptor Pointer Register */
+#define DMA8_START_ADDR 0xFFC00E04 /* DMA Channel 8 Start Address Register */
+#define DMA8_CONFIG 0xFFC00E08 /* DMA Channel 8 Configuration Register */
+#define DMA8_X_COUNT 0xFFC00E10 /* DMA Channel 8 X Count Register */
+#define DMA8_X_MODIFY 0xFFC00E14 /* DMA Channel 8 X Modify Register */
+#define DMA8_Y_COUNT 0xFFC00E18 /* DMA Channel 8 Y Count Register */
+#define DMA8_Y_MODIFY 0xFFC00E1C /* DMA Channel 8 Y Modify Register */
+#define DMA8_CURR_DESC_PTR 0xFFC00E20 /* DMA Channel 8 Current Descriptor Pointer Register */
+#define DMA8_CURR_ADDR 0xFFC00E24 /* DMA Channel 8 Current Address Register */
+#define DMA8_IRQ_STATUS 0xFFC00E28 /* DMA Channel 8 Interrupt/Status Register */
+#define DMA8_PERIPHERAL_MAP 0xFFC00E2C /* DMA Channel 8 Peripheral Map Register */
+#define DMA8_CURR_X_COUNT 0xFFC00E30 /* DMA Channel 8 Current X Count Register */
+#define DMA8_CURR_Y_COUNT 0xFFC00E38 /* DMA Channel 8 Current Y Count Register */
+
+#define DMA9_NEXT_DESC_PTR 0xFFC00E40 /* DMA Channel 9 Next Descriptor Pointer Register */
+#define DMA9_START_ADDR 0xFFC00E44 /* DMA Channel 9 Start Address Register */
+#define DMA9_CONFIG 0xFFC00E48 /* DMA Channel 9 Configuration Register */
+#define DMA9_X_COUNT 0xFFC00E50 /* DMA Channel 9 X Count Register */
+#define DMA9_X_MODIFY 0xFFC00E54 /* DMA Channel 9 X Modify Register */
+#define DMA9_Y_COUNT 0xFFC00E58 /* DMA Channel 9 Y Count Register */
+#define DMA9_Y_MODIFY 0xFFC00E5C /* DMA Channel 9 Y Modify Register */
+#define DMA9_CURR_DESC_PTR 0xFFC00E60 /* DMA Channel 9 Current Descriptor Pointer Register */
+#define DMA9_CURR_ADDR 0xFFC00E64 /* DMA Channel 9 Current Address Register */
+#define DMA9_IRQ_STATUS 0xFFC00E68 /* DMA Channel 9 Interrupt/Status Register */
+#define DMA9_PERIPHERAL_MAP 0xFFC00E6C /* DMA Channel 9 Peripheral Map Register */
+#define DMA9_CURR_X_COUNT 0xFFC00E70 /* DMA Channel 9 Current X Count Register */
+#define DMA9_CURR_Y_COUNT 0xFFC00E78 /* DMA Channel 9 Current Y Count Register */
+
+#define DMA10_NEXT_DESC_PTR 0xFFC00E80 /* DMA Channel 10 Next Descriptor Pointer Register */
+#define DMA10_START_ADDR 0xFFC00E84 /* DMA Channel 10 Start Address Register */
+#define DMA10_CONFIG 0xFFC00E88 /* DMA Channel 10 Configuration Register */
+#define DMA10_X_COUNT 0xFFC00E90 /* DMA Channel 10 X Count Register */
+#define DMA10_X_MODIFY 0xFFC00E94 /* DMA Channel 10 X Modify Register */
+#define DMA10_Y_COUNT 0xFFC00E98 /* DMA Channel 10 Y Count Register */
+#define DMA10_Y_MODIFY 0xFFC00E9C /* DMA Channel 10 Y Modify Register */
+#define DMA10_CURR_DESC_PTR 0xFFC00EA0 /* DMA Channel 10 Current Descriptor Pointer Register */
+#define DMA10_CURR_ADDR 0xFFC00EA4 /* DMA Channel 10 Current Address Register */
+#define DMA10_IRQ_STATUS 0xFFC00EA8 /* DMA Channel 10 Interrupt/Status Register */
+#define DMA10_PERIPHERAL_MAP 0xFFC00EAC /* DMA Channel 10 Peripheral Map Register */
+#define DMA10_CURR_X_COUNT 0xFFC00EB0 /* DMA Channel 10 Current X Count Register */
+#define DMA10_CURR_Y_COUNT 0xFFC00EB8 /* DMA Channel 10 Current Y Count Register */
+
+#define DMA11_NEXT_DESC_PTR 0xFFC00EC0 /* DMA Channel 11 Next Descriptor Pointer Register */
+#define DMA11_START_ADDR 0xFFC00EC4 /* DMA Channel 11 Start Address Register */
+#define DMA11_CONFIG 0xFFC00EC8 /* DMA Channel 11 Configuration Register */
+#define DMA11_X_COUNT 0xFFC00ED0 /* DMA Channel 11 X Count Register */
+#define DMA11_X_MODIFY 0xFFC00ED4 /* DMA Channel 11 X Modify Register */
+#define DMA11_Y_COUNT 0xFFC00ED8 /* DMA Channel 11 Y Count Register */
+#define DMA11_Y_MODIFY 0xFFC00EDC /* DMA Channel 11 Y Modify Register */
+#define DMA11_CURR_DESC_PTR 0xFFC00EE0 /* DMA Channel 11 Current Descriptor Pointer Register */
+#define DMA11_CURR_ADDR 0xFFC00EE4 /* DMA Channel 11 Current Address Register */
+#define DMA11_IRQ_STATUS 0xFFC00EE8 /* DMA Channel 11 Interrupt/Status Register */
+#define DMA11_PERIPHERAL_MAP 0xFFC00EEC /* DMA Channel 11 Peripheral Map Register */
+#define DMA11_CURR_X_COUNT 0xFFC00EF0 /* DMA Channel 11 Current X Count Register */
+#define DMA11_CURR_Y_COUNT 0xFFC00EF8 /* DMA Channel 11 Current Y Count Register */
+
+#define MDMA_D0_NEXT_DESC_PTR 0xFFC00F00 /* MemDMA Stream 0 Destination Next Descriptor Pointer Register */
+#define MDMA_D0_START_ADDR 0xFFC00F04 /* MemDMA Stream 0 Destination Start Address Register */
+#define MDMA_D0_CONFIG 0xFFC00F08 /* MemDMA Stream 0 Destination Configuration Register */
+#define MDMA_D0_X_COUNT 0xFFC00F10 /* MemDMA Stream 0 Destination X Count Register */
+#define MDMA_D0_X_MODIFY 0xFFC00F14 /* MemDMA Stream 0 Destination X Modify Register */
+#define MDMA_D0_Y_COUNT 0xFFC00F18 /* MemDMA Stream 0 Destination Y Count Register */
+#define MDMA_D0_Y_MODIFY 0xFFC00F1C /* MemDMA Stream 0 Destination Y Modify Register */
+#define MDMA_D0_CURR_DESC_PTR 0xFFC00F20 /* MemDMA Stream 0 Destination Current Descriptor Pointer Register */
+#define MDMA_D0_CURR_ADDR 0xFFC00F24 /* MemDMA Stream 0 Destination Current Address Register */
+#define MDMA_D0_IRQ_STATUS 0xFFC00F28 /* MemDMA Stream 0 Destination Interrupt/Status Register */
+#define MDMA_D0_PERIPHERAL_MAP 0xFFC00F2C /* MemDMA Stream 0 Destination Peripheral Map Register */
+#define MDMA_D0_CURR_X_COUNT 0xFFC00F30 /* MemDMA Stream 0 Destination Current X Count Register */
+#define MDMA_D0_CURR_Y_COUNT 0xFFC00F38 /* MemDMA Stream 0 Destination Current Y Count Register */
+
+#define MDMA_S0_NEXT_DESC_PTR 0xFFC00F40 /* MemDMA Stream 0 Source Next Descriptor Pointer Register */
+#define MDMA_S0_START_ADDR 0xFFC00F44 /* MemDMA Stream 0 Source Start Address Register */
+#define MDMA_S0_CONFIG 0xFFC00F48 /* MemDMA Stream 0 Source Configuration Register */
+#define MDMA_S0_X_COUNT 0xFFC00F50 /* MemDMA Stream 0 Source X Count Register */
+#define MDMA_S0_X_MODIFY 0xFFC00F54 /* MemDMA Stream 0 Source X Modify Register */
+#define MDMA_S0_Y_COUNT 0xFFC00F58 /* MemDMA Stream 0 Source Y Count Register */
+#define MDMA_S0_Y_MODIFY 0xFFC00F5C /* MemDMA Stream 0 Source Y Modify Register */
+#define MDMA_S0_CURR_DESC_PTR 0xFFC00F60 /* MemDMA Stream 0 Source Current Descriptor Pointer Register */
+#define MDMA_S0_CURR_ADDR 0xFFC00F64 /* MemDMA Stream 0 Source Current Address Register */
+#define MDMA_S0_IRQ_STATUS 0xFFC00F68 /* MemDMA Stream 0 Source Interrupt/Status Register */
+#define MDMA_S0_PERIPHERAL_MAP 0xFFC00F6C /* MemDMA Stream 0 Source Peripheral Map Register */
+#define MDMA_S0_CURR_X_COUNT 0xFFC00F70 /* MemDMA Stream 0 Source Current X Count Register */
+#define MDMA_S0_CURR_Y_COUNT 0xFFC00F78 /* MemDMA Stream 0 Source Current Y Count Register */
+
+#define MDMA_D1_NEXT_DESC_PTR 0xFFC00F80 /* MemDMA Stream 1 Destination Next Descriptor Pointer Register */
+#define MDMA_D1_START_ADDR 0xFFC00F84 /* MemDMA Stream 1 Destination Start Address Register */
+#define MDMA_D1_CONFIG 0xFFC00F88 /* MemDMA Stream 1 Destination Configuration Register */
+#define MDMA_D1_X_COUNT 0xFFC00F90 /* MemDMA Stream 1 Destination X Count Register */
+#define MDMA_D1_X_MODIFY 0xFFC00F94 /* MemDMA Stream 1 Destination X Modify Register */
+#define MDMA_D1_Y_COUNT 0xFFC00F98 /* MemDMA Stream 1 Destination Y Count Register */
+#define MDMA_D1_Y_MODIFY 0xFFC00F9C /* MemDMA Stream 1 Destination Y Modify Register */
+#define MDMA_D1_CURR_DESC_PTR 0xFFC00FA0 /* MemDMA Stream 1 Destination Current Descriptor Pointer Register */
+#define MDMA_D1_CURR_ADDR 0xFFC00FA4 /* MemDMA Stream 1 Destination Current Address Register */
+#define MDMA_D1_IRQ_STATUS 0xFFC00FA8 /* MemDMA Stream 1 Destination Interrupt/Status Register */
+#define MDMA_D1_PERIPHERAL_MAP 0xFFC00FAC /* MemDMA Stream 1 Destination Peripheral Map Register */
+#define MDMA_D1_CURR_X_COUNT 0xFFC00FB0 /* MemDMA Stream 1 Destination Current X Count Register */
+#define MDMA_D1_CURR_Y_COUNT 0xFFC00FB8 /* MemDMA Stream 1 Destination Current Y Count Register */
+
+#define MDMA_S1_NEXT_DESC_PTR 0xFFC00FC0 /* MemDMA Stream 1 Source Next Descriptor Pointer Register */
+#define MDMA_S1_START_ADDR 0xFFC00FC4 /* MemDMA Stream 1 Source Start Address Register */
+#define MDMA_S1_CONFIG 0xFFC00FC8 /* MemDMA Stream 1 Source Configuration Register */
+#define MDMA_S1_X_COUNT 0xFFC00FD0 /* MemDMA Stream 1 Source X Count Register */
+#define MDMA_S1_X_MODIFY 0xFFC00FD4 /* MemDMA Stream 1 Source X Modify Register */
+#define MDMA_S1_Y_COUNT 0xFFC00FD8 /* MemDMA Stream 1 Source Y Count Register */
+#define MDMA_S1_Y_MODIFY 0xFFC00FDC /* MemDMA Stream 1 Source Y Modify Register */
+#define MDMA_S1_CURR_DESC_PTR 0xFFC00FE0 /* MemDMA Stream 1 Source Current Descriptor Pointer Register */
+#define MDMA_S1_CURR_ADDR 0xFFC00FE4 /* MemDMA Stream 1 Source Current Address Register */
+#define MDMA_S1_IRQ_STATUS 0xFFC00FE8 /* MemDMA Stream 1 Source Interrupt/Status Register */
+#define MDMA_S1_PERIPHERAL_MAP 0xFFC00FEC /* MemDMA Stream 1 Source Peripheral Map Register */
+#define MDMA_S1_CURR_X_COUNT 0xFFC00FF0 /* MemDMA Stream 1 Source Current X Count Register */
+#define MDMA_S1_CURR_Y_COUNT 0xFFC00FF8 /* MemDMA Stream 1 Source Current Y Count Register */
+
+/* Parallel Peripheral Interface (0xFFC01000 - 0xFFC010FF) */
+#define PPI_CONTROL 0xFFC01000 /* PPI Control Register */
+#define PPI_STATUS 0xFFC01004 /* PPI Status Register */
+#define PPI_COUNT 0xFFC01008 /* PPI Transfer Count Register */
+#define PPI_DELAY 0xFFC0100C /* PPI Delay Count Register */
+#define PPI_FRAME 0xFFC01010 /* PPI Frame Length Register */
+
+/* Two-Wire Interface (0xFFC01400 - 0xFFC014FF) */
+#define TWI_CLKDIV 0xFFC01400 /* Serial Clock Divider Register */
+#define TWI_CONTROL 0xFFC01404 /* TWI Control Register */
+#define TWI_SLAVE_CTL 0xFFC01408 /* Slave Mode Control Register */
+#define TWI_SLAVE_STAT 0xFFC0140C /* Slave Mode Status Register */
+#define TWI_SLAVE_ADDR 0xFFC01410 /* Slave Mode Address Register */
+#define TWI_MASTER_CTL 0xFFC01414 /* Master Mode Control Register */
+#define TWI_MASTER_STAT 0xFFC01418 /* Master Mode Status Register */
+#define TWI_MASTER_ADDR 0xFFC0141C /* Master Mode Address Register */
+#define TWI_INT_STAT 0xFFC01420 /* TWI Interrupt Status Register */
+#define TWI_INT_MASK 0xFFC01424 /* TWI Master Interrupt Mask Register */
+#define TWI_FIFO_CTL 0xFFC01428 /* FIFO Control Register */
+#define TWI_FIFO_STAT 0xFFC0142C /* FIFO Status Register */
+#define TWI_XMT_DATA8 0xFFC01480 /* FIFO Transmit Data Single Byte Register */
+#define TWI_XMT_DATA16 0xFFC01484 /* FIFO Transmit Data Double Byte Register */
+#define TWI_RCV_DATA8 0xFFC01488 /* FIFO Receive Data Single Byte Register */
+#define TWI_RCV_DATA16 0xFFC0148C /* FIFO Receive Data Double Byte Register */
+
+/* General Purpose I/O Port G (0xFFC01500 - 0xFFC015FF) */
+#define PORTGIO 0xFFC01500 /* Port G I/O Pin State Specify Register */
+#define PORTGIO_CLEAR 0xFFC01504 /* Port G I/O Peripheral Interrupt Clear Register */
+#define PORTGIO_SET 0xFFC01508 /* Port G I/O Peripheral Interrupt Set Register */
+#define PORTGIO_TOGGLE 0xFFC0150C /* Port G I/O Pin State Toggle Register */
+#define PORTGIO_MASKA 0xFFC01510 /* Port G I/O Mask State Specify Interrupt A Register */
+#define PORTGIO_MASKA_CLEAR 0xFFC01514 /* Port G I/O Mask Disable Interrupt A Register */
+#define PORTGIO_MASKA_SET 0xFFC01518 /* Port G I/O Mask Enable Interrupt A Register */
+#define PORTGIO_MASKA_TOGGLE 0xFFC0151C /* Port G I/O Mask Toggle Enable Interrupt A Register */
+#define PORTGIO_MASKB 0xFFC01520 /* Port G I/O Mask State Specify Interrupt B Register */
+#define PORTGIO_MASKB_CLEAR 0xFFC01524 /* Port G I/O Mask Disable Interrupt B Register */
+#define PORTGIO_MASKB_SET 0xFFC01528 /* Port G I/O Mask Enable Interrupt B Register */
+#define PORTGIO_MASKB_TOGGLE 0xFFC0152C /* Port G I/O Mask Toggle Enable Interrupt B Register */
+#define PORTGIO_DIR 0xFFC01530 /* Port G I/O Direction Register */
+#define PORTGIO_POLAR 0xFFC01534 /* Port G I/O Source Polarity Register */
+#define PORTGIO_EDGE 0xFFC01538 /* Port G I/O Source Sensitivity Register */
+#define PORTGIO_BOTH 0xFFC0153C /* Port G I/O Set on BOTH Edges Register */
+#define PORTGIO_INEN 0xFFC01540 /* Port G I/O Input Enable Register */
+
+/* General Purpose I/O Port H (0xFFC01700 - 0xFFC017FF) */
+#define PORTHIO 0xFFC01700 /* Port H I/O Pin State Specify Register */
+#define PORTHIO_CLEAR 0xFFC01704 /* Port H I/O Peripheral Interrupt Clear Register */
+#define PORTHIO_SET 0xFFC01708 /* Port H I/O Peripheral Interrupt Set Register */
+#define PORTHIO_TOGGLE 0xFFC0170C /* Port H I/O Pin State Toggle Register */
+#define PORTHIO_MASKA 0xFFC01710 /* Port H I/O Mask State Specify Interrupt A Register */
+#define PORTHIO_MASKA_CLEAR 0xFFC01714 /* Port H I/O Mask Disable Interrupt A Register */
+#define PORTHIO_MASKA_SET 0xFFC01718 /* Port H I/O Mask Enable Interrupt A Register */
+#define PORTHIO_MASKA_TOGGLE 0xFFC0171C /* Port H I/O Mask Toggle Enable Interrupt A Register */
+#define PORTHIO_MASKB 0xFFC01720 /* Port H I/O Mask State Specify Interrupt B Register */
+#define PORTHIO_MASKB_CLEAR 0xFFC01724 /* Port H I/O Mask Disable Interrupt B Register */
+#define PORTHIO_MASKB_SET 0xFFC01728 /* Port H I/O Mask Enable Interrupt B Register */
+#define PORTHIO_MASKB_TOGGLE 0xFFC0172C /* Port H I/O Mask Toggle Enable Interrupt B Register */
+#define PORTHIO_DIR 0xFFC01730 /* Port H I/O Direction Register */
+#define PORTHIO_POLAR 0xFFC01734 /* Port H I/O Source Polarity Register */
+#define PORTHIO_EDGE 0xFFC01738 /* Port H I/O Source Sensitivity Register */
+#define PORTHIO_BOTH 0xFFC0173C /* Port H I/O Set on BOTH Edges Register */
+#define PORTHIO_INEN 0xFFC01740 /* Port H I/O Input Enable Register */
+
+/* UART1 Controller (0xFFC02000 - 0xFFC020FF) */
+#define UART1_THR 0xFFC02000 /* Transmit Holding register */
+#define UART1_RBR 0xFFC02000 /* Receive Buffer register */
+#define UART1_DLL 0xFFC02000 /* Divisor Latch (Low-Byte) */
+#define UART1_IER 0xFFC02004 /* Interrupt Enable Register */
+#define UART1_DLH 0xFFC02004 /* Divisor Latch (High-Byte) */
+#define UART1_IIR 0xFFC02008 /* Interrupt Identification Register */
+#define UART1_LCR 0xFFC0200C /* Line Control Register */
+#define UART1_MCR 0xFFC02010 /* Modem Control Register */
+#define UART1_LSR 0xFFC02014 /* Line Status Register */
+#define UART1_MSR 0xFFC02018 /* Modem Status Register */
+#define UART1_SCR 0xFFC0201C /* SCR Scratch Register */
+#define UART1_GCTL 0xFFC02024 /* Global Control Register */
+
+/* CAN Controller (0xFFC02A00 - 0xFFC02FFF) */
+/* For Mailboxes 0-15 */
+#define CAN_MC1 0xFFC02A00 /* Mailbox config reg 1 */
+#define CAN_MD1 0xFFC02A04 /* Mailbox direction reg 1 */
+#define CAN_TRS1 0xFFC02A08 /* Transmit Request Set reg 1 */
+#define CAN_TRR1 0xFFC02A0C /* Transmit Request Reset reg 1 */
+#define CAN_TA1 0xFFC02A10 /* Transmit Acknowledge reg 1 */
+#define CAN_AA1 0xFFC02A14 /* Transmit Abort Acknowledge reg 1 */
+#define CAN_RMP1 0xFFC02A18 /* Receive Message Pending reg 1 */
+#define CAN_RML1 0xFFC02A1C /* Receive Message Lost reg 1 */
+#define CAN_MBTIF1 0xFFC02A20 /* Mailbox Transmit Interrupt Flag reg 1 */
+#define CAN_MBRIF1 0xFFC02A24 /* Mailbox Receive Interrupt Flag reg 1 */
+#define CAN_MBIM1 0xFFC02A28 /* Mailbox Interrupt Mask reg 1 */
+#define CAN_RFH1 0xFFC02A2C /* Remote Frame Handling reg 1 */
+#define CAN_OPSS1 0xFFC02A30 /* Overwrite Protection Single Shot Xmit reg 1 */
+
+/* For Mailboxes 16-31 */
+#define CAN_MC2 0xFFC02A40 /* Mailbox config reg 2 */
+#define CAN_MD2 0xFFC02A44 /* Mailbox direction reg 2 */
+#define CAN_TRS2 0xFFC02A48 /* Transmit Request Set reg 2 */
+#define CAN_TRR2 0xFFC02A4C /* Transmit Request Reset reg 2 */
+#define CAN_TA2 0xFFC02A50 /* Transmit Acknowledge reg 2 */
+#define CAN_AA2 0xFFC02A54 /* Transmit Abort Acknowledge reg 2 */
+#define CAN_RMP2 0xFFC02A58 /* Receive Message Pending reg 2 */
+#define CAN_RML2 0xFFC02A5C /* Receive Message Lost reg 2 */
+#define CAN_MBTIF2 0xFFC02A60 /* Mailbox Transmit Interrupt Flag reg 2 */
+#define CAN_MBRIF2 0xFFC02A64 /* Mailbox Receive Interrupt Flag reg 2 */
+#define CAN_MBIM2 0xFFC02A68 /* Mailbox Interrupt Mask reg 2 */
+#define CAN_RFH2 0xFFC02A6C /* Remote Frame Handling reg 2 */
+#define CAN_OPSS2 0xFFC02A70 /* Overwrite Protection Single Shot Xmit reg 2 */
+
+/* CAN Configuration, Control, and Status Registers */
+#define CAN_CLOCK 0xFFC02A80 /* Bit Timing Configuration register 0 */
+#define CAN_TIMING 0xFFC02A84 /* Bit Timing Configuration register 1 */
+#define CAN_DEBUG 0xFFC02A88 /* Debug Register */
+#define CAN_STATUS 0xFFC02A8C /* Global Status Register */
+#define CAN_CEC 0xFFC02A90 /* Error Counter Register */
+#define CAN_GIS 0xFFC02A94 /* Global Interrupt Status Register */
+#define CAN_GIM 0xFFC02A98 /* Global Interrupt Mask Register */
+#define CAN_GIF 0xFFC02A9C /* Global Interrupt Flag Register */
+#define CAN_CONTROL 0xFFC02AA0 /* Master Control Register */
+#define CAN_INTR 0xFFC02AA4 /* Interrupt Pending Register */
+#define CAN_SFCMVER 0xFFC02AA8 /* Version Code Register */
+#define CAN_MBTD 0xFFC02AAC /* Mailbox Temporary Disable Feature */
+#define CAN_EWR 0xFFC02AB0 /* Programmable Warning Level */
+#define CAN_ESR 0xFFC02AB4 /* Error Status Register */
+#define CAN_UCREG 0xFFC02AC0 /* Universal Counter Register/Capture Register */
+#define CAN_UCCNT 0xFFC02AC4 /* Universal Counter */
+#define CAN_UCRC 0xFFC02AC8 /* Universal Counter Force Reload Register */
+#define CAN_UCCNF 0xFFC02ACC /* Universal Counter Configuration Register */
+
+/* Mailbox Acceptance Masks */
+#define CAN_AM00L 0xFFC02B00 /* Mailbox 0 Low Acceptance Mask */
+#define CAN_AM00H 0xFFC02B04 /* Mailbox 0 High Acceptance Mask */
+#define CAN_AM01L 0xFFC02B08 /* Mailbox 1 Low Acceptance Mask */
+#define CAN_AM01H 0xFFC02B0C /* Mailbox 1 High Acceptance Mask */
+#define CAN_AM02L 0xFFC02B10 /* Mailbox 2 Low Acceptance Mask */
+#define CAN_AM02H 0xFFC02B14 /* Mailbox 2 High Acceptance Mask */
+#define CAN_AM03L 0xFFC02B18 /* Mailbox 3 Low Acceptance Mask */
+#define CAN_AM03H 0xFFC02B1C /* Mailbox 3 High Acceptance Mask */
+#define CAN_AM04L 0xFFC02B20 /* Mailbox 4 Low Acceptance Mask */
+#define CAN_AM04H 0xFFC02B24 /* Mailbox 4 High Acceptance Mask */
+#define CAN_AM05L 0xFFC02B28 /* Mailbox 5 Low Acceptance Mask */
+#define CAN_AM05H 0xFFC02B2C /* Mailbox 5 High Acceptance Mask */
+#define CAN_AM06L 0xFFC02B30 /* Mailbox 6 Low Acceptance Mask */
+#define CAN_AM06H 0xFFC02B34 /* Mailbox 6 High Acceptance Mask */
+#define CAN_AM07L 0xFFC02B38 /* Mailbox 7 Low Acceptance Mask */
+#define CAN_AM07H 0xFFC02B3C /* Mailbox 7 High Acceptance Mask */
+#define CAN_AM08L 0xFFC02B40 /* Mailbox 8 Low Acceptance Mask */
+#define CAN_AM08H 0xFFC02B44 /* Mailbox 8 High Acceptance Mask */
+#define CAN_AM09L 0xFFC02B48 /* Mailbox 9 Low Acceptance Mask */
+#define CAN_AM09H 0xFFC02B4C /* Mailbox 9 High Acceptance Mask */
+#define CAN_AM10L 0xFFC02B50 /* Mailbox 10 Low Acceptance Mask */
+#define CAN_AM10H 0xFFC02B54 /* Mailbox 10 High Acceptance Mask */
+#define CAN_AM11L 0xFFC02B58 /* Mailbox 11 Low Acceptance Mask */
+#define CAN_AM11H 0xFFC02B5C /* Mailbox 11 High Acceptance Mask */
+#define CAN_AM12L 0xFFC02B60 /* Mailbox 12 Low Acceptance Mask */
+#define CAN_AM12H 0xFFC02B64 /* Mailbox 12 High Acceptance Mask */
+#define CAN_AM13L 0xFFC02B68 /* Mailbox 13 Low Acceptance Mask */
+#define CAN_AM13H 0xFFC02B6C /* Mailbox 13 High Acceptance Mask */
+#define CAN_AM14L 0xFFC02B70 /* Mailbox 14 Low Acceptance Mask */
+#define CAN_AM14H 0xFFC02B74 /* Mailbox 14 High Acceptance Mask */
+#define CAN_AM15L 0xFFC02B78 /* Mailbox 15 Low Acceptance Mask */
+#define CAN_AM15H 0xFFC02B7C /* Mailbox 15 High Acceptance Mask */
+
+#define CAN_AM16L 0xFFC02B80 /* Mailbox 16 Low Acceptance Mask */
+#define CAN_AM16H 0xFFC02B84 /* Mailbox 16 High Acceptance Mask */
+#define CAN_AM17L 0xFFC02B88 /* Mailbox 17 Low Acceptance Mask */
+#define CAN_AM17H 0xFFC02B8C /* Mailbox 17 High Acceptance Mask */
+#define CAN_AM18L 0xFFC02B90 /* Mailbox 18 Low Acceptance Mask */
+#define CAN_AM18H 0xFFC02B94 /* Mailbox 18 High Acceptance Mask */
+#define CAN_AM19L 0xFFC02B98 /* Mailbox 19 Low Acceptance Mask */
+#define CAN_AM19H 0xFFC02B9C /* Mailbox 19 High Acceptance Mask */
+#define CAN_AM20L 0xFFC02BA0 /* Mailbox 20 Low Acceptance Mask */
+#define CAN_AM20H 0xFFC02BA4 /* Mailbox 20 High Acceptance Mask */
+#define CAN_AM21L 0xFFC02BA8 /* Mailbox 21 Low Acceptance Mask */
+#define CAN_AM21H 0xFFC02BAC /* Mailbox 21 High Acceptance Mask */
+#define CAN_AM22L 0xFFC02BB0 /* Mailbox 22 Low Acceptance Mask */
+#define CAN_AM22H 0xFFC02BB4 /* Mailbox 22 High Acceptance Mask */
+#define CAN_AM23L 0xFFC02BB8 /* Mailbox 23 Low Acceptance Mask */
+#define CAN_AM23H 0xFFC02BBC /* Mailbox 23 High Acceptance Mask */
+#define CAN_AM24L 0xFFC02BC0 /* Mailbox 24 Low Acceptance Mask */
+#define CAN_AM24H 0xFFC02BC4 /* Mailbox 24 High Acceptance Mask */
+#define CAN_AM25L 0xFFC02BC8 /* Mailbox 25 Low Acceptance Mask */
+#define CAN_AM25H 0xFFC02BCC /* Mailbox 25 High Acceptance Mask */
+#define CAN_AM26L 0xFFC02BD0 /* Mailbox 26 Low Acceptance Mask */
+#define CAN_AM26H 0xFFC02BD4 /* Mailbox 26 High Acceptance Mask */
+#define CAN_AM27L 0xFFC02BD8 /* Mailbox 27 Low Acceptance Mask */
+#define CAN_AM27H 0xFFC02BDC /* Mailbox 27 High Acceptance Mask */
+#define CAN_AM28L 0xFFC02BE0 /* Mailbox 28 Low Acceptance Mask */
+#define CAN_AM28H 0xFFC02BE4 /* Mailbox 28 High Acceptance Mask */
+#define CAN_AM29L 0xFFC02BE8 /* Mailbox 29 Low Acceptance Mask */
+#define CAN_AM29H 0xFFC02BEC /* Mailbox 29 High Acceptance Mask */
+#define CAN_AM30L 0xFFC02BF0 /* Mailbox 30 Low Acceptance Mask */
+#define CAN_AM30H 0xFFC02BF4 /* Mailbox 30 High Acceptance Mask */
+#define CAN_AM31L 0xFFC02BF8 /* Mailbox 31 Low Acceptance Mask */
+#define CAN_AM31H 0xFFC02BFC /* Mailbox 31 High Acceptance Mask */
+
+/* CAN Acceptance Mask Macros */
+#define CAN_AM_L(x) (CAN_AM00L+((x)*0x8))
+#define CAN_AM_H(x) (CAN_AM00H+((x)*0x8))
+
+/* Mailbox Registers */
+#define CAN_MB00_DATA0 0xFFC02C00 /* Mailbox 0 Data Word 0 [15:0] Register */
+#define CAN_MB00_DATA1 0xFFC02C04 /* Mailbox 0 Data Word 1 [31:16] Register */
+#define CAN_MB00_DATA2 0xFFC02C08 /* Mailbox 0 Data Word 2 [47:32] Register */
+#define CAN_MB00_DATA3 0xFFC02C0C /* Mailbox 0 Data Word 3 [63:48] Register */
+#define CAN_MB00_LENGTH 0xFFC02C10 /* Mailbox 0 Data Length Code Register */
+#define CAN_MB00_TIMESTAMP 0xFFC02C14 /* Mailbox 0 Time Stamp Value Register */
+#define CAN_MB00_ID0 0xFFC02C18 /* Mailbox 0 Identifier Low Register */
+#define CAN_MB00_ID1 0xFFC02C1C /* Mailbox 0 Identifier High Register */
+
+#define CAN_MB01_DATA0 0xFFC02C20 /* Mailbox 1 Data Word 0 [15:0] Register */
+#define CAN_MB01_DATA1 0xFFC02C24 /* Mailbox 1 Data Word 1 [31:16] Register */
+#define CAN_MB01_DATA2 0xFFC02C28 /* Mailbox 1 Data Word 2 [47:32] Register */
+#define CAN_MB01_DATA3 0xFFC02C2C /* Mailbox 1 Data Word 3 [63:48] Register */
+#define CAN_MB01_LENGTH 0xFFC02C30 /* Mailbox 1 Data Length Code Register */
+#define CAN_MB01_TIMESTAMP 0xFFC02C34 /* Mailbox 1 Time Stamp Value Register */
+#define CAN_MB01_ID0 0xFFC02C38 /* Mailbox 1 Identifier Low Register */
+#define CAN_MB01_ID1 0xFFC02C3C /* Mailbox 1 Identifier High Register */
+
+#define CAN_MB02_DATA0 0xFFC02C40 /* Mailbox 2 Data Word 0 [15:0] Register */
+#define CAN_MB02_DATA1 0xFFC02C44 /* Mailbox 2 Data Word 1 [31:16] Register */
+#define CAN_MB02_DATA2 0xFFC02C48 /* Mailbox 2 Data Word 2 [47:32] Register */
+#define CAN_MB02_DATA3 0xFFC02C4C /* Mailbox 2 Data Word 3 [63:48] Register */
+#define CAN_MB02_LENGTH 0xFFC02C50 /* Mailbox 2 Data Length Code Register */
+#define CAN_MB02_TIMESTAMP 0xFFC02C54 /* Mailbox 2 Time Stamp Value Register */
+#define CAN_MB02_ID0 0xFFC02C58 /* Mailbox 2 Identifier Low Register */
+#define CAN_MB02_ID1 0xFFC02C5C /* Mailbox 2 Identifier High Register */
+
+#define CAN_MB03_DATA0 0xFFC02C60 /* Mailbox 3 Data Word 0 [15:0] Register */
+#define CAN_MB03_DATA1 0xFFC02C64 /* Mailbox 3 Data Word 1 [31:16] Register */
+#define CAN_MB03_DATA2 0xFFC02C68 /* Mailbox 3 Data Word 2 [47:32] Register */
+#define CAN_MB03_DATA3 0xFFC02C6C /* Mailbox 3 Data Word 3 [63:48] Register */
+#define CAN_MB03_LENGTH 0xFFC02C70 /* Mailbox 3 Data Length Code Register */
+#define CAN_MB03_TIMESTAMP 0xFFC02C74 /* Mailbox 3 Time Stamp Value Register */
+#define CAN_MB03_ID0 0xFFC02C78 /* Mailbox 3 Identifier Low Register */
+#define CAN_MB03_ID1 0xFFC02C7C /* Mailbox 3 Identifier High Register */
+
+#define CAN_MB04_DATA0 0xFFC02C80 /* Mailbox 4 Data Word 0 [15:0] Register */
+#define CAN_MB04_DATA1 0xFFC02C84 /* Mailbox 4 Data Word 1 [31:16] Register */
+#define CAN_MB04_DATA2 0xFFC02C88 /* Mailbox 4 Data Word 2 [47:32] Register */
+#define CAN_MB04_DATA3 0xFFC02C8C /* Mailbox 4 Data Word 3 [63:48] Register */
+#define CAN_MB04_LENGTH 0xFFC02C90 /* Mailbox 4 Data Length Code Register */
+#define CAN_MB04_TIMESTAMP 0xFFC02C94 /* Mailbox 4 Time Stamp Value Register */
+#define CAN_MB04_ID0 0xFFC02C98 /* Mailbox 4 Identifier Low Register */
+#define CAN_MB04_ID1 0xFFC02C9C /* Mailbox 4 Identifier High Register */
+
+#define CAN_MB05_DATA0 0xFFC02CA0 /* Mailbox 5 Data Word 0 [15:0] Register */
+#define CAN_MB05_DATA1 0xFFC02CA4 /* Mailbox 5 Data Word 1 [31:16] Register */
+#define CAN_MB05_DATA2 0xFFC02CA8 /* Mailbox 5 Data Word 2 [47:32] Register */
+#define CAN_MB05_DATA3 0xFFC02CAC /* Mailbox 5 Data Word 3 [63:48] Register */
+#define CAN_MB05_LENGTH 0xFFC02CB0 /* Mailbox 5 Data Length Code Register */
+#define CAN_MB05_TIMESTAMP 0xFFC02CB4 /* Mailbox 5 Time Stamp Value Register */
+#define CAN_MB05_ID0 0xFFC02CB8 /* Mailbox 5 Identifier Low Register */
+#define CAN_MB05_ID1 0xFFC02CBC /* Mailbox 5 Identifier High Register */
+
+#define CAN_MB06_DATA0 0xFFC02CC0 /* Mailbox 6 Data Word 0 [15:0] Register */
+#define CAN_MB06_DATA1 0xFFC02CC4 /* Mailbox 6 Data Word 1 [31:16] Register */
+#define CAN_MB06_DATA2 0xFFC02CC8 /* Mailbox 6 Data Word 2 [47:32] Register */
+#define CAN_MB06_DATA3 0xFFC02CCC /* Mailbox 6 Data Word 3 [63:48] Register */
+#define CAN_MB06_LENGTH 0xFFC02CD0 /* Mailbox 6 Data Length Code Register */
+#define CAN_MB06_TIMESTAMP 0xFFC02CD4 /* Mailbox 6 Time Stamp Value Register */
+#define CAN_MB06_ID0 0xFFC02CD8 /* Mailbox 6 Identifier Low Register */
+#define CAN_MB06_ID1 0xFFC02CDC /* Mailbox 6 Identifier High Register */
+
+#define CAN_MB07_DATA0 0xFFC02CE0 /* Mailbox 7 Data Word 0 [15:0] Register */
+#define CAN_MB07_DATA1 0xFFC02CE4 /* Mailbox 7 Data Word 1 [31:16] Register */
+#define CAN_MB07_DATA2 0xFFC02CE8 /* Mailbox 7 Data Word 2 [47:32] Register */
+#define CAN_MB07_DATA3 0xFFC02CEC /* Mailbox 7 Data Word 3 [63:48] Register */
+#define CAN_MB07_LENGTH 0xFFC02CF0 /* Mailbox 7 Data Length Code Register */
+#define CAN_MB07_TIMESTAMP 0xFFC02CF4 /* Mailbox 7 Time Stamp Value Register */
+#define CAN_MB07_ID0 0xFFC02CF8 /* Mailbox 7 Identifier Low Register */
+#define CAN_MB07_ID1 0xFFC02CFC /* Mailbox 7 Identifier High Register */
+
+#define CAN_MB08_DATA0 0xFFC02D00 /* Mailbox 8 Data Word 0 [15:0] Register */
+#define CAN_MB08_DATA1 0xFFC02D04 /* Mailbox 8 Data Word 1 [31:16] Register */
+#define CAN_MB08_DATA2 0xFFC02D08 /* Mailbox 8 Data Word 2 [47:32] Register */
+#define CAN_MB08_DATA3 0xFFC02D0C /* Mailbox 8 Data Word 3 [63:48] Register */
+#define CAN_MB08_LENGTH 0xFFC02D10 /* Mailbox 8 Data Length Code Register */
+#define CAN_MB08_TIMESTAMP 0xFFC02D14 /* Mailbox 8 Time Stamp Value Register */
+#define CAN_MB08_ID0 0xFFC02D18 /* Mailbox 8 Identifier Low Register */
+#define CAN_MB08_ID1 0xFFC02D1C /* Mailbox 8 Identifier High Register */
+
+#define CAN_MB09_DATA0 0xFFC02D20 /* Mailbox 9 Data Word 0 [15:0] Register */
+#define CAN_MB09_DATA1 0xFFC02D24 /* Mailbox 9 Data Word 1 [31:16] Register */
+#define CAN_MB09_DATA2 0xFFC02D28 /* Mailbox 9 Data Word 2 [47:32] Register */
+#define CAN_MB09_DATA3 0xFFC02D2C /* Mailbox 9 Data Word 3 [63:48] Register */
+#define CAN_MB09_LENGTH 0xFFC02D30 /* Mailbox 9 Data Length Code Register */
+#define CAN_MB09_TIMESTAMP 0xFFC02D34 /* Mailbox 9 Time Stamp Value Register */
+#define CAN_MB09_ID0 0xFFC02D38 /* Mailbox 9 Identifier Low Register */
+#define CAN_MB09_ID1 0xFFC02D3C /* Mailbox 9 Identifier High Register */
+
+#define CAN_MB10_DATA0 0xFFC02D40 /* Mailbox 10 Data Word 0 [15:0] Register */
+#define CAN_MB10_DATA1 0xFFC02D44 /* Mailbox 10 Data Word 1 [31:16] Register */
+#define CAN_MB10_DATA2 0xFFC02D48 /* Mailbox 10 Data Word 2 [47:32] Register */
+#define CAN_MB10_DATA3 0xFFC02D4C /* Mailbox 10 Data Word 3 [63:48] Register */
+#define CAN_MB10_LENGTH 0xFFC02D50 /* Mailbox 10 Data Length Code Register */
+#define CAN_MB10_TIMESTAMP 0xFFC02D54 /* Mailbox 10 Time Stamp Value Register */
+#define CAN_MB10_ID0 0xFFC02D58 /* Mailbox 10 Identifier Low Register */
+#define CAN_MB10_ID1 0xFFC02D5C /* Mailbox 10 Identifier High Register */
+
+#define CAN_MB11_DATA0 0xFFC02D60 /* Mailbox 11 Data Word 0 [15:0] Register */
+#define CAN_MB11_DATA1 0xFFC02D64 /* Mailbox 11 Data Word 1 [31:16] Register */
+#define CAN_MB11_DATA2 0xFFC02D68 /* Mailbox 11 Data Word 2 [47:32] Register */
+#define CAN_MB11_DATA3 0xFFC02D6C /* Mailbox 11 Data Word 3 [63:48] Register */
+#define CAN_MB11_LENGTH 0xFFC02D70 /* Mailbox 11 Data Length Code Register */
+#define CAN_MB11_TIMESTAMP 0xFFC02D74 /* Mailbox 11 Time Stamp Value Register */
+#define CAN_MB11_ID0 0xFFC02D78 /* Mailbox 11 Identifier Low Register */
+#define CAN_MB11_ID1 0xFFC02D7C /* Mailbox 11 Identifier High Register */
+
+#define CAN_MB12_DATA0 0xFFC02D80 /* Mailbox 12 Data Word 0 [15:0] Register */
+#define CAN_MB12_DATA1 0xFFC02D84 /* Mailbox 12 Data Word 1 [31:16] Register */
+#define CAN_MB12_DATA2 0xFFC02D88 /* Mailbox 12 Data Word 2 [47:32] Register */
+#define CAN_MB12_DATA3 0xFFC02D8C /* Mailbox 12 Data Word 3 [63:48] Register */
+#define CAN_MB12_LENGTH 0xFFC02D90 /* Mailbox 12 Data Length Code Register */
+#define CAN_MB12_TIMESTAMP 0xFFC02D94 /* Mailbox 12 Time Stamp Value Register */
+#define CAN_MB12_ID0 0xFFC02D98 /* Mailbox 12 Identifier Low Register */
+#define CAN_MB12_ID1 0xFFC02D9C /* Mailbox 12 Identifier High Register */
+
+#define CAN_MB13_DATA0 0xFFC02DA0 /* Mailbox 13 Data Word 0 [15:0] Register */
+#define CAN_MB13_DATA1 0xFFC02DA4 /* Mailbox 13 Data Word 1 [31:16] Register */
+#define CAN_MB13_DATA2 0xFFC02DA8 /* Mailbox 13 Data Word 2 [47:32] Register */
+#define CAN_MB13_DATA3 0xFFC02DAC /* Mailbox 13 Data Word 3 [63:48] Register */
+#define CAN_MB13_LENGTH 0xFFC02DB0 /* Mailbox 13 Data Length Code Register */
+#define CAN_MB13_TIMESTAMP 0xFFC02DB4 /* Mailbox 13 Time Stamp Value Register */
+#define CAN_MB13_ID0 0xFFC02DB8 /* Mailbox 13 Identifier Low Register */
+#define CAN_MB13_ID1 0xFFC02DBC /* Mailbox 13 Identifier High Register */
+
+#define CAN_MB14_DATA0 0xFFC02DC0 /* Mailbox 14 Data Word 0 [15:0] Register */
+#define CAN_MB14_DATA1 0xFFC02DC4 /* Mailbox 14 Data Word 1 [31:16] Register */
+#define CAN_MB14_DATA2 0xFFC02DC8 /* Mailbox 14 Data Word 2 [47:32] Register */
+#define CAN_MB14_DATA3 0xFFC02DCC /* Mailbox 14 Data Word 3 [63:48] Register */
+#define CAN_MB14_LENGTH 0xFFC02DD0 /* Mailbox 14 Data Length Code Register */
+#define CAN_MB14_TIMESTAMP 0xFFC02DD4 /* Mailbox 14 Time Stamp Value Register */
+#define CAN_MB14_ID0 0xFFC02DD8 /* Mailbox 14 Identifier Low Register */
+#define CAN_MB14_ID1 0xFFC02DDC /* Mailbox 14 Identifier High Register */
+
+#define CAN_MB15_DATA0 0xFFC02DE0 /* Mailbox 15 Data Word 0 [15:0] Register */
+#define CAN_MB15_DATA1 0xFFC02DE4 /* Mailbox 15 Data Word 1 [31:16] Register */
+#define CAN_MB15_DATA2 0xFFC02DE8 /* Mailbox 15 Data Word 2 [47:32] Register */
+#define CAN_MB15_DATA3 0xFFC02DEC /* Mailbox 15 Data Word 3 [63:48] Register */
+#define CAN_MB15_LENGTH 0xFFC02DF0 /* Mailbox 15 Data Length Code Register */
+#define CAN_MB15_TIMESTAMP 0xFFC02DF4 /* Mailbox 15 Time Stamp Value Register */
+#define CAN_MB15_ID0 0xFFC02DF8 /* Mailbox 15 Identifier Low Register */
+#define CAN_MB15_ID1 0xFFC02DFC /* Mailbox 15 Identifier High Register */
+
+#define CAN_MB16_DATA0 0xFFC02E00 /* Mailbox 16 Data Word 0 [15:0] Register */
+#define CAN_MB16_DATA1 0xFFC02E04 /* Mailbox 16 Data Word 1 [31:16] Register */
+#define CAN_MB16_DATA2 0xFFC02E08 /* Mailbox 16 Data Word 2 [47:32] Register */
+#define CAN_MB16_DATA3 0xFFC02E0C /* Mailbox 16 Data Word 3 [63:48] Register */
+#define CAN_MB16_LENGTH 0xFFC02E10 /* Mailbox 16 Data Length Code Register */
+#define CAN_MB16_TIMESTAMP 0xFFC02E14 /* Mailbox 16 Time Stamp Value Register */
+#define CAN_MB16_ID0 0xFFC02E18 /* Mailbox 16 Identifier Low Register */
+#define CAN_MB16_ID1 0xFFC02E1C /* Mailbox 16 Identifier High Register */
+
+#define CAN_MB17_DATA0 0xFFC02E20 /* Mailbox 17 Data Word 0 [15:0] Register */
+#define CAN_MB17_DATA1 0xFFC02E24 /* Mailbox 17 Data Word 1 [31:16] Register */
+#define CAN_MB17_DATA2 0xFFC02E28 /* Mailbox 17 Data Word 2 [47:32] Register */
+#define CAN_MB17_DATA3 0xFFC02E2C /* Mailbox 17 Data Word 3 [63:48] Register */
+#define CAN_MB17_LENGTH 0xFFC02E30 /* Mailbox 17 Data Length Code Register */
+#define CAN_MB17_TIMESTAMP 0xFFC02E34 /* Mailbox 17 Time Stamp Value Register */
+#define CAN_MB17_ID0 0xFFC02E38 /* Mailbox 17 Identifier Low Register */
+#define CAN_MB17_ID1 0xFFC02E3C /* Mailbox 17 Identifier High Register */
+
+#define CAN_MB18_DATA0 0xFFC02E40 /* Mailbox 18 Data Word 0 [15:0] Register */
+#define CAN_MB18_DATA1 0xFFC02E44 /* Mailbox 18 Data Word 1 [31:16] Register */
+#define CAN_MB18_DATA2 0xFFC02E48 /* Mailbox 18 Data Word 2 [47:32] Register */
+#define CAN_MB18_DATA3 0xFFC02E4C /* Mailbox 18 Data Word 3 [63:48] Register */
+#define CAN_MB18_LENGTH 0xFFC02E50 /* Mailbox 18 Data Length Code Register */
+#define CAN_MB18_TIMESTAMP 0xFFC02E54 /* Mailbox 18 Time Stamp Value Register */
+#define CAN_MB18_ID0 0xFFC02E58 /* Mailbox 18 Identifier Low Register */
+#define CAN_MB18_ID1 0xFFC02E5C /* Mailbox 18 Identifier High Register */
+
+#define CAN_MB19_DATA0 0xFFC02E60 /* Mailbox 19 Data Word 0 [15:0] Register */
+#define CAN_MB19_DATA1 0xFFC02E64 /* Mailbox 19 Data Word 1 [31:16] Register */
+#define CAN_MB19_DATA2 0xFFC02E68 /* Mailbox 19 Data Word 2 [47:32] Register */
+#define CAN_MB19_DATA3 0xFFC02E6C /* Mailbox 19 Data Word 3 [63:48] Register */
+#define CAN_MB19_LENGTH 0xFFC02E70 /* Mailbox 19 Data Length Code Register */
+#define CAN_MB19_TIMESTAMP 0xFFC02E74 /* Mailbox 19 Time Stamp Value Register */
+#define CAN_MB19_ID0 0xFFC02E78 /* Mailbox 19 Identifier Low Register */
+#define CAN_MB19_ID1 0xFFC02E7C /* Mailbox 19 Identifier High Register */
+
+#define CAN_MB20_DATA0 0xFFC02E80 /* Mailbox 20 Data Word 0 [15:0] Register */
+#define CAN_MB20_DATA1 0xFFC02E84 /* Mailbox 20 Data Word 1 [31:16] Register */
+#define CAN_MB20_DATA2 0xFFC02E88 /* Mailbox 20 Data Word 2 [47:32] Register */
+#define CAN_MB20_DATA3 0xFFC02E8C /* Mailbox 20 Data Word 3 [63:48] Register */
+#define CAN_MB20_LENGTH 0xFFC02E90 /* Mailbox 20 Data Length Code Register */
+#define CAN_MB20_TIMESTAMP 0xFFC02E94 /* Mailbox 20 Time Stamp Value Register */
+#define CAN_MB20_ID0 0xFFC02E98 /* Mailbox 20 Identifier Low Register */
+#define CAN_MB20_ID1 0xFFC02E9C /* Mailbox 20 Identifier High Register */
+
+#define CAN_MB21_DATA0 0xFFC02EA0 /* Mailbox 21 Data Word 0 [15:0] Register */
+#define CAN_MB21_DATA1 0xFFC02EA4 /* Mailbox 21 Data Word 1 [31:16] Register */
+#define CAN_MB21_DATA2 0xFFC02EA8 /* Mailbox 21 Data Word 2 [47:32] Register */
+#define CAN_MB21_DATA3 0xFFC02EAC /* Mailbox 21 Data Word 3 [63:48] Register */
+#define CAN_MB21_LENGTH 0xFFC02EB0 /* Mailbox 21 Data Length Code Register */
+#define CAN_MB21_TIMESTAMP 0xFFC02EB4 /* Mailbox 21 Time Stamp Value Register */
+#define CAN_MB21_ID0 0xFFC02EB8 /* Mailbox 21 Identifier Low Register */
+#define CAN_MB21_ID1 0xFFC02EBC /* Mailbox 21 Identifier High Register */
+
+#define CAN_MB22_DATA0 0xFFC02EC0 /* Mailbox 22 Data Word 0 [15:0] Register */
+#define CAN_MB22_DATA1 0xFFC02EC4 /* Mailbox 22 Data Word 1 [31:16] Register */
+#define CAN_MB22_DATA2 0xFFC02EC8 /* Mailbox 22 Data Word 2 [47:32] Register */
+#define CAN_MB22_DATA3 0xFFC02ECC /* Mailbox 22 Data Word 3 [63:48] Register */
+#define CAN_MB22_LENGTH 0xFFC02ED0 /* Mailbox 22 Data Length Code Register */
+#define CAN_MB22_TIMESTAMP 0xFFC02ED4 /* Mailbox 22 Time Stamp Value Register */
+#define CAN_MB22_ID0 0xFFC02ED8 /* Mailbox 22 Identifier Low Register */
+#define CAN_MB22_ID1 0xFFC02EDC /* Mailbox 22 Identifier High Register */
+
+#define CAN_MB23_DATA0 0xFFC02EE0 /* Mailbox 23 Data Word 0 [15:0] Register */
+#define CAN_MB23_DATA1 0xFFC02EE4 /* Mailbox 23 Data Word 1 [31:16] Register */
+#define CAN_MB23_DATA2 0xFFC02EE8 /* Mailbox 23 Data Word 2 [47:32] Register */
+#define CAN_MB23_DATA3 0xFFC02EEC /* Mailbox 23 Data Word 3 [63:48] Register */
+#define CAN_MB23_LENGTH 0xFFC02EF0 /* Mailbox 23 Data Length Code Register */
+#define CAN_MB23_TIMESTAMP 0xFFC02EF4 /* Mailbox 23 Time Stamp Value Register */
+#define CAN_MB23_ID0 0xFFC02EF8 /* Mailbox 23 Identifier Low Register */
+#define CAN_MB23_ID1 0xFFC02EFC /* Mailbox 23 Identifier High Register */
+
+#define CAN_MB24_DATA0 0xFFC02F00 /* Mailbox 24 Data Word 0 [15:0] Register */
+#define CAN_MB24_DATA1 0xFFC02F04 /* Mailbox 24 Data Word 1 [31:16] Register */
+#define CAN_MB24_DATA2 0xFFC02F08 /* Mailbox 24 Data Word 2 [47:32] Register */
+#define CAN_MB24_DATA3 0xFFC02F0C /* Mailbox 24 Data Word 3 [63:48] Register */
+#define CAN_MB24_LENGTH 0xFFC02F10 /* Mailbox 24 Data Length Code Register */
+#define CAN_MB24_TIMESTAMP 0xFFC02F14 /* Mailbox 24 Time Stamp Value Register */
+#define CAN_MB24_ID0 0xFFC02F18 /* Mailbox 24 Identifier Low Register */
+#define CAN_MB24_ID1 0xFFC02F1C /* Mailbox 24 Identifier High Register */
+
+#define CAN_MB25_DATA0 0xFFC02F20 /* Mailbox 25 Data Word 0 [15:0] Register */
+#define CAN_MB25_DATA1 0xFFC02F24 /* Mailbox 25 Data Word 1 [31:16] Register */
+#define CAN_MB25_DATA2 0xFFC02F28 /* Mailbox 25 Data Word 2 [47:32] Register */
+#define CAN_MB25_DATA3 0xFFC02F2C /* Mailbox 25 Data Word 3 [63:48] Register */
+#define CAN_MB25_LENGTH 0xFFC02F30 /* Mailbox 25 Data Length Code Register */
+#define CAN_MB25_TIMESTAMP 0xFFC02F34 /* Mailbox 25 Time Stamp Value Register */
+#define CAN_MB25_ID0 0xFFC02F38 /* Mailbox 25 Identifier Low Register */
+#define CAN_MB25_ID1 0xFFC02F3C /* Mailbox 25 Identifier High Register */
+
+#define CAN_MB26_DATA0 0xFFC02F40 /* Mailbox 26 Data Word 0 [15:0] Register */
+#define CAN_MB26_DATA1 0xFFC02F44 /* Mailbox 26 Data Word 1 [31:16] Register */
+#define CAN_MB26_DATA2 0xFFC02F48 /* Mailbox 26 Data Word 2 [47:32] Register */
+#define CAN_MB26_DATA3 0xFFC02F4C /* Mailbox 26 Data Word 3 [63:48] Register */
+#define CAN_MB26_LENGTH 0xFFC02F50 /* Mailbox 26 Data Length Code Register */
+#define CAN_MB26_TIMESTAMP 0xFFC02F54 /* Mailbox 26 Time Stamp Value Register */
+#define CAN_MB26_ID0 0xFFC02F58 /* Mailbox 26 Identifier Low Register */
+#define CAN_MB26_ID1 0xFFC02F5C /* Mailbox 26 Identifier High Register */
+
+#define CAN_MB27_DATA0 0xFFC02F60 /* Mailbox 27 Data Word 0 [15:0] Register */
+#define CAN_MB27_DATA1 0xFFC02F64 /* Mailbox 27 Data Word 1 [31:16] Register */
+#define CAN_MB27_DATA2 0xFFC02F68 /* Mailbox 27 Data Word 2 [47:32] Register */
+#define CAN_MB27_DATA3 0xFFC02F6C /* Mailbox 27 Data Word 3 [63:48] Register */
+#define CAN_MB27_LENGTH 0xFFC02F70 /* Mailbox 27 Data Length Code Register */
+#define CAN_MB27_TIMESTAMP 0xFFC02F74 /* Mailbox 27 Time Stamp Value Register */
+#define CAN_MB27_ID0 0xFFC02F78 /* Mailbox 27 Identifier Low Register */
+#define CAN_MB27_ID1 0xFFC02F7C /* Mailbox 27 Identifier High Register */
+
+#define CAN_MB28_DATA0 0xFFC02F80 /* Mailbox 28 Data Word 0 [15:0] Register */
+#define CAN_MB28_DATA1 0xFFC02F84 /* Mailbox 28 Data Word 1 [31:16] Register */
+#define CAN_MB28_DATA2 0xFFC02F88 /* Mailbox 28 Data Word 2 [47:32] Register */
+#define CAN_MB28_DATA3 0xFFC02F8C /* Mailbox 28 Data Word 3 [63:48] Register */
+#define CAN_MB28_LENGTH 0xFFC02F90 /* Mailbox 28 Data Length Code Register */
+#define CAN_MB28_TIMESTAMP 0xFFC02F94 /* Mailbox 28 Time Stamp Value Register */
+#define CAN_MB28_ID0 0xFFC02F98 /* Mailbox 28 Identifier Low Register */
+#define CAN_MB28_ID1 0xFFC02F9C /* Mailbox 28 Identifier High Register */
+
+#define CAN_MB29_DATA0 0xFFC02FA0 /* Mailbox 29 Data Word 0 [15:0] Register */
+#define CAN_MB29_DATA1 0xFFC02FA4 /* Mailbox 29 Data Word 1 [31:16] Register */
+#define CAN_MB29_DATA2 0xFFC02FA8 /* Mailbox 29 Data Word 2 [47:32] Register */
+#define CAN_MB29_DATA3 0xFFC02FAC /* Mailbox 29 Data Word 3 [63:48] Register */
+#define CAN_MB29_LENGTH 0xFFC02FB0 /* Mailbox 29 Data Length Code Register */
+#define CAN_MB29_TIMESTAMP 0xFFC02FB4 /* Mailbox 29 Time Stamp Value Register */
+#define CAN_MB29_ID0 0xFFC02FB8 /* Mailbox 29 Identifier Low Register */
+#define CAN_MB29_ID1 0xFFC02FBC /* Mailbox 29 Identifier High Register */
+
+#define CAN_MB30_DATA0 0xFFC02FC0 /* Mailbox 30 Data Word 0 [15:0] Register */
+#define CAN_MB30_DATA1 0xFFC02FC4 /* Mailbox 30 Data Word 1 [31:16] Register */
+#define CAN_MB30_DATA2 0xFFC02FC8 /* Mailbox 30 Data Word 2 [47:32] Register */
+#define CAN_MB30_DATA3 0xFFC02FCC /* Mailbox 30 Data Word 3 [63:48] Register */
+#define CAN_MB30_LENGTH 0xFFC02FD0 /* Mailbox 30 Data Length Code Register */
+#define CAN_MB30_TIMESTAMP 0xFFC02FD4 /* Mailbox 30 Time Stamp Value Register */
+#define CAN_MB30_ID0 0xFFC02FD8 /* Mailbox 30 Identifier Low Register */
+#define CAN_MB30_ID1 0xFFC02FDC /* Mailbox 30 Identifier High Register */
+
+#define CAN_MB31_DATA0 0xFFC02FE0 /* Mailbox 31 Data Word 0 [15:0] Register */
+#define CAN_MB31_DATA1 0xFFC02FE4 /* Mailbox 31 Data Word 1 [31:16] Register */
+#define CAN_MB31_DATA2 0xFFC02FE8 /* Mailbox 31 Data Word 2 [47:32] Register */
+#define CAN_MB31_DATA3 0xFFC02FEC /* Mailbox 31 Data Word 3 [63:48] Register */
+#define CAN_MB31_LENGTH 0xFFC02FF0 /* Mailbox 31 Data Length Code Register */
+#define CAN_MB31_TIMESTAMP 0xFFC02FF4 /* Mailbox 31 Time Stamp Value Register */
+#define CAN_MB31_ID0 0xFFC02FF8 /* Mailbox 31 Identifier Low Register */
+#define CAN_MB31_ID1 0xFFC02FFC /* Mailbox 31 Identifier High Register */
+
+/* CAN Mailbox Area Macros */
+#define CAN_MB_ID1(x) (CAN_MB00_ID1+((x)*0x20))
+#define CAN_MB_ID0(x) (CAN_MB00_ID0+((x)*0x20))
+#define CAN_MB_TIMESTAMP(x) (CAN_MB00_TIMESTAMP+((x)*0x20))
+#define CAN_MB_LENGTH(x) (CAN_MB00_LENGTH+((x)*0x20))
+#define CAN_MB_DATA3(x) (CAN_MB00_DATA3+((x)*0x20))
+#define CAN_MB_DATA2(x) (CAN_MB00_DATA2+((x)*0x20))
+#define CAN_MB_DATA1(x) (CAN_MB00_DATA1+((x)*0x20))
+#define CAN_MB_DATA0(x) (CAN_MB00_DATA0+((x)*0x20))
+
+/* Pin Control Registers (0xFFC03200 - 0xFFC032FF) */
+#define PORTF_FER 0xFFC03200 /* Port F Function Enable Register (Alternate/Flag*) */
+#define PORTG_FER 0xFFC03204 /* Port G Function Enable Register (Alternate/Flag*) */
+#define PORTH_FER 0xFFC03208 /* Port H Function Enable Register (Alternate/Flag*) */
+#define BFIN_PORT_MUX 0xFFC0320C /* Port Multiplexer Control Register */
+
+/* Handshake MDMA Registers (0xFFC03300 - 0xFFC033FF) */
+#define HMDMA0_CONTROL 0xFFC03300 /* Handshake MDMA0 Control Register */
+#define HMDMA0_ECINIT 0xFFC03304 /* HMDMA0 Initial Edge Count Register */
+#define HMDMA0_BCINIT 0xFFC03308 /* HMDMA0 Initial Block Count Register */
+#define HMDMA0_ECURGENT 0xFFC0330C /* HMDMA0 Urgent Edge Count Threshhold Register */
+#define HMDMA0_ECOVERFLOW 0xFFC03310 /* HMDMA0 Edge Count Overflow Interrupt Register */
+#define HMDMA0_ECOUNT 0xFFC03314 /* HMDMA0 Current Edge Count Register */
+#define HMDMA0_BCOUNT 0xFFC03318 /* HMDMA0 Current Block Count Register */
+
+#define HMDMA1_CONTROL 0xFFC03340 /* Handshake MDMA1 Control Register */
+#define HMDMA1_ECINIT 0xFFC03344 /* HMDMA1 Initial Edge Count Register */
+#define HMDMA1_BCINIT 0xFFC03348 /* HMDMA1 Initial Block Count Register */
+#define HMDMA1_ECURGENT 0xFFC0334C /* HMDMA1 Urgent Edge Count Threshhold Register */
+#define HMDMA1_ECOVERFLOW 0xFFC03350 /* HMDMA1 Edge Count Overflow Interrupt Register */
+#define HMDMA1_ECOUNT 0xFFC03354 /* HMDMA1 Current Edge Count Register */
+#define HMDMA1_BCOUNT 0xFFC03358 /* HMDMA1 Current Block Count Register */
+
+/***********************************************************************************
+** System MMR Register Bits And Macros
+**
+** Disclaimer: All macros are intended to make C and Assembly code more readable.
+** Use these macros carefully, as any that do left shifts for field
+** depositing will result in the lower order bits being destroyed. Any
+** macro that shifts left to properly position the bit-field should be
+** used as part of an OR to initialize a register and NOT as a dynamic
+** modifier UNLESS the lower order bits are saved and ORed back in when
+** the macro is used.
+*************************************************************************************/
+/*
+** ********************* PLL AND RESET MASKS ****************************************/
+/* PLL_CTL Masks */
+#define DF 0x0001 /* 0: PLL = CLKIN, 1: PLL = CLKIN/2 */
+#define PLL_OFF 0x0002 /* PLL Not Powered */
+#define STOPCK 0x0008 /* Core Clock Off */
+#define PDWN 0x0020 /* Enter Deep Sleep Mode */
+#define IN_DELAY 0x0040 /* Add 200ps Delay To EBIU Input Latches */
+#define OUT_DELAY 0x0080 /* Add 200ps Delay To EBIU Output Signals */
+#define BYPASS 0x0100 /* Bypass the PLL */
+#define MSEL 0x7E00 /* Multiplier Select For CCLK/VCO Factors */
+/* PLL_CTL Macros (Only Use With Logic OR While Setting Lower Order Bits) */
+#define SET_MSEL(x) (((x)&0x3F) << 0x9) /* Set MSEL = 0-63 --> VCO = CLKIN*MSEL */
+
+/* PLL_DIV Masks */
+#define SSEL 0x000F /* System Select */
+#define CSEL 0x0030 /* Core Select */
+#define CSEL_DIV1 0x0000 /* CCLK = VCO / 1 */
+#define CSEL_DIV2 0x0010 /* CCLK = VCO / 2 */
+#define CSEL_DIV4 0x0020 /* CCLK = VCO / 4 */
+#define CSEL_DIV8 0x0030 /* CCLK = VCO / 8 */
+/* PLL_DIV Macros */
+#define SET_SSEL(x) ((x)&0xF) /* Set SSEL = 0-15 --> SCLK = VCO/SSEL */
+
+/* VR_CTL Masks */
+#define FREQ 0x0003 /* Switching Oscillator Frequency For Regulator */
+#define HIBERNATE 0x0000 /* Powerdown/Bypass On-Board Regulation */
+#define FREQ_333 0x0001 /* Switching Frequency Is 333 kHz */
+#define FREQ_667 0x0002 /* Switching Frequency Is 667 kHz */
+#define FREQ_1000 0x0003 /* Switching Frequency Is 1 MHz */
+
+#define GAIN 0x000C /* Voltage Level Gain */
+#define GAIN_5 0x0000 /* GAIN = 5 */
+#define GAIN_10 0x0004 /* GAIN = 10 */
+#define GAIN_20 0x0008 /* GAIN = 20 */
+#define GAIN_50 0x000C /* GAIN = 50 */
+
+#define VLEV 0x00F0 /* Internal Voltage Level */
+#define VLEV_085 0x0060 /* VLEV = 0.85 V (-5% - +10% Accuracy) */
+#define VLEV_090 0x0070 /* VLEV = 0.90 V (-5% - +10% Accuracy) */
+#define VLEV_095 0x0080 /* VLEV = 0.95 V (-5% - +10% Accuracy) */
+#define VLEV_100 0x0090 /* VLEV = 1.00 V (-5% - +10% Accuracy) */
+#define VLEV_105 0x00A0 /* VLEV = 1.05 V (-5% - +10% Accuracy) */
+#define VLEV_110 0x00B0 /* VLEV = 1.10 V (-5% - +10% Accuracy) */
+#define VLEV_115 0x00C0 /* VLEV = 1.15 V (-5% - +10% Accuracy) */
+#define VLEV_120 0x00D0 /* VLEV = 1.20 V (-5% - +10% Accuracy) */
+#define VLEV_125 0x00E0 /* VLEV = 1.25 V (-5% - +10% Accuracy) */
+#define VLEV_130 0x00F0 /* VLEV = 1.30 V (-5% - +10% Accuracy) */
+
+#define WAKE 0x0100 /* Enable RTC/Reset Wakeup From Hibernate */
+#define PHYWE 0x0200 /* Enable PHY Wakeup From Hibernate */
+#define CANWE 0x0400 /* Enable CAN Wakeup From Hibernate */
+#define PHYCLKOE 0x4000 /* PHY Clock Output Enable */
+#define CKELOW 0x8000 /* Enable Drive CKE Low During Reset */
+
+/* PLL_STAT Masks */
+#define ACTIVE_PLLENABLED 0x0001 /* Processor In Active Mode With PLL Enabled */
+#define FULL_ON 0x0002 /* Processor In Full On Mode */
+#define ACTIVE_PLLDISABLED 0x0004 /* Processor In Active Mode With PLL Disabled */
+#define PLL_LOCKED 0x0020 /* PLL_LOCKCNT Has Been Reached */
+
+/* CHIPID Masks */
+#define CHIPID_VERSION 0xF0000000
+#define CHIPID_FAMILY 0x0FFFF000
+#define CHIPID_MANUFACTURE 0x00000FFE
+
+/* SWRST Masks */
+#define SYSTEM_RESET 0x0007 /* Initiates A System Software Reset */
+#define DOUBLE_FAULT 0x0008 /* Core Double Fault Causes Reset */
+#define RESET_DOUBLE 0x2000 /* SW Reset Generated By Core Double-Fault */
+#define RESET_WDOG 0x4000 /* SW Reset Generated By Watchdog Timer */
+#define RESET_SOFTWARE 0x8000 /* SW Reset Occurred Since Last Read Of SWRST */
+
+/* SYSCR Masks */
+#define BMODE 0x0006 /* Boot Mode - Latched During HW Reset From Mode Pins */
+#define NOBOOT 0x0010 /* Execute From L1 or ASYNC Bank 0 When BMODE = 0 */
+
+/* ************* SYSTEM INTERRUPT CONTROLLER MASKS *************************************/
+
+/* SIC_IAR0 Macros */
+#define P0_IVG(x) (((x)&0xF)-7) /* Peripheral #0 assigned IVG #x */
+#define P1_IVG(x) (((x)&0xF)-7) << 0x4 /* Peripheral #1 assigned IVG #x */
+#define P2_IVG(x) (((x)&0xF)-7) << 0x8 /* Peripheral #2 assigned IVG #x */
+#define P3_IVG(x) (((x)&0xF)-7) << 0xC /* Peripheral #3 assigned IVG #x */
+#define P4_IVG(x) (((x)&0xF)-7) << 0x10 /* Peripheral #4 assigned IVG #x */
+#define P5_IVG(x) (((x)&0xF)-7) << 0x14 /* Peripheral #5 assigned IVG #x */
+#define P6_IVG(x) (((x)&0xF)-7) << 0x18 /* Peripheral #6 assigned IVG #x */
+#define P7_IVG(x) (((x)&0xF)-7) << 0x1C /* Peripheral #7 assigned IVG #x */
+
+/* SIC_IAR1 Macros */
+#define P8_IVG(x) (((x)&0xF)-7) /* Peripheral #8 assigned IVG #x */
+#define P9_IVG(x) (((x)&0xF)-7) << 0x4 /* Peripheral #9 assigned IVG #x */
+#define P10_IVG(x) (((x)&0xF)-7) << 0x8 /* Peripheral #10 assigned IVG #x */
+#define P11_IVG(x) (((x)&0xF)-7) << 0xC /* Peripheral #11 assigned IVG #x */
+#define P12_IVG(x) (((x)&0xF)-7) << 0x10 /* Peripheral #12 assigned IVG #x */
+#define P13_IVG(x) (((x)&0xF)-7) << 0x14 /* Peripheral #13 assigned IVG #x */
+#define P14_IVG(x) (((x)&0xF)-7) << 0x18 /* Peripheral #14 assigned IVG #x */
+#define P15_IVG(x) (((x)&0xF)-7) << 0x1C /* Peripheral #15 assigned IVG #x */
+
+/* SIC_IAR2 Macros */
+#define P16_IVG(x) (((x)&0xF)-7) /* Peripheral #16 assigned IVG #x */
+#define P17_IVG(x) (((x)&0xF)-7) << 0x4 /* Peripheral #17 assigned IVG #x */
+#define P18_IVG(x) (((x)&0xF)-7) << 0x8 /* Peripheral #18 assigned IVG #x */
+#define P19_IVG(x) (((x)&0xF)-7) << 0xC /* Peripheral #19 assigned IVG #x */
+#define P20_IVG(x) (((x)&0xF)-7) << 0x10 /* Peripheral #20 assigned IVG #x */
+#define P21_IVG(x) (((x)&0xF)-7) << 0x14 /* Peripheral #21 assigned IVG #x */
+#define P22_IVG(x) (((x)&0xF)-7) << 0x18 /* Peripheral #22 assigned IVG #x */
+#define P23_IVG(x) (((x)&0xF)-7) << 0x1C /* Peripheral #23 assigned IVG #x */
+
+/* SIC_IAR3 Macros */
+#define P24_IVG(x) (((x)&0xF)-7) /* Peripheral #24 assigned IVG #x */
+#define P25_IVG(x) (((x)&0xF)-7) << 0x4 /* Peripheral #25 assigned IVG #x */
+#define P26_IVG(x) (((x)&0xF)-7) << 0x8 /* Peripheral #26 assigned IVG #x */
+#define P27_IVG(x) (((x)&0xF)-7) << 0xC /* Peripheral #27 assigned IVG #x */
+#define P28_IVG(x) (((x)&0xF)-7) << 0x10 /* Peripheral #28 assigned IVG #x */
+#define P29_IVG(x) (((x)&0xF)-7) << 0x14 /* Peripheral #29 assigned IVG #x */
+#define P30_IVG(x) (((x)&0xF)-7) << 0x18 /* Peripheral #30 assigned IVG #x */
+#define P31_IVG(x) (((x)&0xF)-7) << 0x1C /* Peripheral #31 assigned IVG #x */
+
+/* SIC_IMASK Masks */
+#define SIC_UNMASK_ALL 0x00000000 /* Unmask all peripheral interrupts */
+#define SIC_MASK_ALL 0xFFFFFFFF /* Mask all peripheral interrupts */
+#define SIC_MASK(x) (1 << ((x)&0x1F)) /* Mask Peripheral #x interrupt */
+#define SIC_UNMASK(x) (0xFFFFFFFF ^ (1 << ((x)&0x1F))) /* Unmask Peripheral #x interrupt */
+
+/* SIC_IWR Masks */
+#define IWR_DISABLE_ALL 0x00000000 /* Wakeup Disable all peripherals */
+#define IWR_ENABLE_ALL 0xFFFFFFFF /* Wakeup Enable all peripherals */
+#define IWR_ENABLE(x) (1 << ((x)&0x1F)) /* Wakeup Enable Peripheral #x */
+#define IWR_DISABLE(x) (0xFFFFFFFF ^ (1 << ((x)&0x1F))) /* Wakeup Disable Peripheral #x */
+
+/* *************** WATCHDOG TIMER MASKS *******************************************/
+/* WDOG_CTL Masks */
+#define WDOG_RESET 0x0000 /* Generate Reset Event */
+#define WDOG_NMI 0x0002 /* Generate Non-Maskable Interrupt (NMI) Event */
+#define WDOG_GPI 0x0004 /* Generate General Purpose (GP) Interrupt */
+#define WDOG_NONE 0x0006 /* Disable Watchdog Timer Interrupts */
+#define TMR_EN 0x0FF0 /* Watchdog Counter Enable */
+#define TMR_DIS 0x0AD0 /* Watchdog Counter Disable */
+#define TRO 0x8000 /* Watchdog Expired */
+
+/* ************** UART CONTROLLER MASKS *************************/
+/* UARTx_LCR Masks */
+#define WLS(x) ((((x)&0x3)-5) & 0x03) /* Word Length Select */
+#define STB 0x04 /* Stop Bits */
+#define PEN 0x08 /* Parity Enable */
+#define EPS 0x10 /* Even Parity Select */
+#define STP 0x20 /* Stick Parity */
+#define SB 0x40 /* Set Break */
+#define DLAB 0x80 /* Divisor Latch Access */
+
+/* UARTx_MCR Mask */
+#define LOOP 0x10 /* Loopback Mode Enable */
+
+/* UARTx_LSR Masks */
+#define DR 0x01 /* Data Ready */
+#define OE 0x02 /* Overrun Error */
+#define PE 0x04 /* Parity Error */
+#define FE 0x08 /* Framing Error */
+#define BI 0x10 /* Break Interrupt */
+#define THRE 0x20 /* THR Empty */
+#define TEMT 0x40 /* TSR and UART_THR Empty */
+
+/* UARTx_IER Masks */
+#define ERBFI 0x01 /* Enable Receive Buffer Full Interrupt */
+#define ETBEI 0x02 /* Enable Transmit Buffer Empty Interrupt */
+#define ELSI 0x04 /* Enable RX Status Interrupt */
+
+/* UARTx_IIR Masks */
+#define NINT 0x01 /* Pending Interrupt */
+#define IIR_TX_READY 0x02 /* UART_THR empty */
+#define IIR_RX_READY 0x04 /* Receive data ready */
+#define IIR_LINE_CHANGE 0x06 /* Receive line status */
+#define IIR_STATUS 0x06
+
+/* UARTx_GCTL Masks */
+#define UCEN 0x01 /* Enable UARTx Clocks */
+#define IREN 0x02 /* Enable IrDA Mode */
+#define TPOLC 0x04 /* IrDA TX Polarity Change */
+#define RPOLC 0x08 /* IrDA RX Polarity Change */
+#define FPE 0x10 /* Force Parity Error On Transmit */
+#define FFE 0x20 /* Force Framing Error On Transmit */
+
+/* *********** SERIAL PERIPHERAL INTERFACE (SPI) MASKS ****************************/
+/* SPI_CTL Masks */
+#define TIMOD 0x0003 /* Transfer Initiate Mode */
+#define RDBR_CORE 0x0000 /* RDBR Read Initiates, IRQ When RDBR Full */
+#define TDBR_CORE 0x0001 /* TDBR Write Initiates, IRQ When TDBR Empty */
+#define RDBR_DMA 0x0002 /* DMA Read, DMA Until FIFO Empty */
+#define TDBR_DMA 0x0003 /* DMA Write, DMA Until FIFO Full */
+#define SZ 0x0004 /* Send Zero (When TDBR Empty, Send Zero/Last*) */
+#define GM 0x0008 /* Get More (When RDBR Full, Overwrite/Discard*) */
+#define PSSE 0x0010 /* Slave-Select Input Enable */
+#define EMISO 0x0020 /* Enable MISO As Output */
+#define SPI_SIZE 0x0100 /* Size of Words (16/8* Bits) */
+#define LSBF 0x0200 /* LSB First */
+#define CPHA 0x0400 /* Clock Phase */
+#define CPOL 0x0800 /* Clock Polarity */
+#define MSTR 0x1000 /* Master/Slave* */
+#define WOM 0x2000 /* Write Open Drain Master */
+#define SPE 0x4000 /* SPI Enable */
+
+/* SPI_FLG Masks */
+#define FLS1 0x0002 /* Enables SPI_FLOUT1 as SPI Slave-Select Output */
+#define FLS2 0x0004 /* Enables SPI_FLOUT2 as SPI Slave-Select Output */
+#define FLS3 0x0008 /* Enables SPI_FLOUT3 as SPI Slave-Select Output */
+#define FLS4 0x0010 /* Enables SPI_FLOUT4 as SPI Slave-Select Output */
+#define FLS5 0x0020 /* Enables SPI_FLOUT5 as SPI Slave-Select Output */
+#define FLS6 0x0040 /* Enables SPI_FLOUT6 as SPI Slave-Select Output */
+#define FLS7 0x0080 /* Enables SPI_FLOUT7 as SPI Slave-Select Output */
+#define FLG1 0xFDFF /* Activates SPI_FLOUT1 */
+#define FLG2 0xFBFF /* Activates SPI_FLOUT2 */
+#define FLG3 0xF7FF /* Activates SPI_FLOUT3 */
+#define FLG4 0xEFFF /* Activates SPI_FLOUT4 */
+#define FLG5 0xDFFF /* Activates SPI_FLOUT5 */
+#define FLG6 0xBFFF /* Activates SPI_FLOUT6 */
+#define FLG7 0x7FFF /* Activates SPI_FLOUT7 */
+
+/* SPI_STAT Masks */
+#define SPIF 0x0001 /* SPI Finished (Single-Word Transfer Complete) */
+#define MODF 0x0002 /* Mode Fault Error (Another Device Tried To Become Master) */
+#define TXE 0x0004 /* Transmission Error (Data Sent With No New Data In TDBR) */
+#define TXS 0x0008 /* SPI_TDBR Data Buffer Status (Full/Empty*) */
+#define RBSY 0x0010 /* Receive Error (Data Received With RDBR Full) */
+#define RXS 0x0020 /* SPI_RDBR Data Buffer Status (Full/Empty*) */
+#define TXCOL 0x0040 /* Transmit Collision Error (Corrupt Data May Have Been Sent) */
+
+/* **************** GENERAL PURPOSE TIMER MASKS **********************/
+/* TIMER_ENABLE Masks */
+#define TIMEN0 0x0001 /* Enable Timer 0 */
+#define TIMEN1 0x0002 /* Enable Timer 1 */
+#define TIMEN2 0x0004 /* Enable Timer 2 */
+#define TIMEN3 0x0008 /* Enable Timer 3 */
+#define TIMEN4 0x0010 /* Enable Timer 4 */
+#define TIMEN5 0x0020 /* Enable Timer 5 */
+#define TIMEN6 0x0040 /* Enable Timer 6 */
+#define TIMEN7 0x0080 /* Enable Timer 7 */
+
+/* TIMER_DISABLE Masks */
+#define TIMDIS0 TIMEN0 /* Disable Timer 0 */
+#define TIMDIS1 TIMEN1 /* Disable Timer 1 */
+#define TIMDIS2 TIMEN2 /* Disable Timer 2 */
+#define TIMDIS3 TIMEN3 /* Disable Timer 3 */
+#define TIMDIS4 TIMEN4 /* Disable Timer 4 */
+#define TIMDIS5 TIMEN5 /* Disable Timer 5 */
+#define TIMDIS6 TIMEN6 /* Disable Timer 6 */
+#define TIMDIS7 TIMEN7 /* Disable Timer 7 */
+
+/* TIMER_STATUS Masks */
+#define TIMIL0 0x00000001 /* Timer 0 Interrupt */
+#define TIMIL1 0x00000002 /* Timer 1 Interrupt */
+#define TIMIL2 0x00000004 /* Timer 2 Interrupt */
+#define TIMIL3 0x00000008 /* Timer 3 Interrupt */
+#define TOVL_ERR0 0x00000010 /* Timer 0 Counter Overflow */
+#define TOVL_ERR1 0x00000020 /* Timer 1 Counter Overflow */
+#define TOVL_ERR2 0x00000040 /* Timer 2 Counter Overflow */
+#define TOVL_ERR3 0x00000080 /* Timer 3 Counter Overflow */
+#define TRUN0 0x00001000 /* Timer 0 Slave Enable Status */
+#define TRUN1 0x00002000 /* Timer 1 Slave Enable Status */
+#define TRUN2 0x00004000 /* Timer 2 Slave Enable Status */
+#define TRUN3 0x00008000 /* Timer 3 Slave Enable Status */
+#define TIMIL4 0x00010000 /* Timer 4 Interrupt */
+#define TIMIL5 0x00020000 /* Timer 5 Interrupt */
+#define TIMIL6 0x00040000 /* Timer 6 Interrupt */
+#define TIMIL7 0x00080000 /* Timer 7 Interrupt */
+#define TOVL_ERR4 0x00100000 /* Timer 4 Counter Overflow */
+#define TOVL_ERR5 0x00200000 /* Timer 5 Counter Overflow */
+#define TOVL_ERR6 0x00400000 /* Timer 6 Counter Overflow */
+#define TOVL_ERR7 0x00800000 /* Timer 7 Counter Overflow */
+#define TRUN4 0x10000000 /* Timer 4 Slave Enable Status */
+#define TRUN5 0x20000000 /* Timer 5 Slave Enable Status */
+#define TRUN6 0x40000000 /* Timer 6 Slave Enable Status */
+#define TRUN7 0x80000000 /* Timer 7 Slave Enable Status */
+
+/* TIMERx_CONFIG Masks */
+#define PWM_OUT 0x0001 /* Pulse-Width Modulation Output Mode */
+#define WDTH_CAP 0x0002 /* Width Capture Input Mode */
+#define EXT_CLK 0x0003 /* External Clock Mode */
+#define PULSE_HI 0x0004 /* Action Pulse (Positive/Negative*) */
+#define PERIOD_CNT 0x0008 /* Period Count */
+#define IRQ_ENA 0x0010 /* Interrupt Request Enable */
+#define TIN_SEL 0x0020 /* Timer Input Select */
+#define OUT_DIS 0x0040 /* Output Pad Disable */
+#define CLK_SEL 0x0080 /* Timer Clock Select */
+#define TOGGLE_HI 0x0100 /* PWM_OUT PULSE_HI Toggle Mode */
+#define EMU_RUN 0x0200 /* Emulation Behavior Select */
+#define ERR_TYP 0xC000 /* Error Type */
+
+/* ****************** GPIO PORTS F, G, H MASKS ***********************/
+/* General Purpose IO (0xFFC00700 - 0xFFC007FF) Masks */
+/* Port F Masks */
+#define PF0 0x0001
+#define PF1 0x0002
+#define PF2 0x0004
+#define PF3 0x0008
+#define PF4 0x0010
+#define PF5 0x0020
+#define PF6 0x0040
+#define PF7 0x0080
+#define PF8 0x0100
+#define PF9 0x0200
+#define PF10 0x0400
+#define PF11 0x0800
+#define PF12 0x1000
+#define PF13 0x2000
+#define PF14 0x4000
+#define PF15 0x8000
+
+/* Port G Masks */
+#define PG0 0x0001
+#define PG1 0x0002
+#define PG2 0x0004
+#define PG3 0x0008
+#define PG4 0x0010
+#define PG5 0x0020
+#define PG6 0x0040
+#define PG7 0x0080
+#define PG8 0x0100
+#define PG9 0x0200
+#define PG10 0x0400
+#define PG11 0x0800
+#define PG12 0x1000
+#define PG13 0x2000
+#define PG14 0x4000
+#define PG15 0x8000
+
+/* Port H Masks */
+#define PH0 0x0001
+#define PH1 0x0002
+#define PH2 0x0004
+#define PH3 0x0008
+#define PH4 0x0010
+#define PH5 0x0020
+#define PH6 0x0040
+#define PH7 0x0080
+#define PH8 0x0100
+#define PH9 0x0200
+#define PH10 0x0400
+#define PH11 0x0800
+#define PH12 0x1000
+#define PH13 0x2000
+#define PH14 0x4000
+#define PH15 0x8000
+
+/* ******************* SERIAL PORT MASKS **************************************/
+/* SPORTx_TCR1 Masks */
+#define TSPEN 0x0001 /* Transmit Enable */
+#define ITCLK 0x0002 /* Internal Transmit Clock Select */
+#define DTYPE_NORM 0x0004 /* Data Format Normal */
+#define DTYPE_ULAW 0x0008 /* Compand Using u-Law */
+#define DTYPE_ALAW 0x000C /* Compand Using A-Law */
+#define TLSBIT 0x0010 /* Transmit Bit Order */
+#define ITFS 0x0200 /* Internal Transmit Frame Sync Select */
+#define TFSR 0x0400 /* Transmit Frame Sync Required Select */
+#define DITFS 0x0800 /* Data-Independent Transmit Frame Sync Select */
+#define LTFS 0x1000 /* Low Transmit Frame Sync Select */
+#define LATFS 0x2000 /* Late Transmit Frame Sync Select */
+#define TCKFE 0x4000 /* Clock Falling Edge Select */
+
+/* SPORTx_TCR2 Masks and Macro */
+#define SLEN(x) ((x)&0x1F) /* SPORT TX Word Length (2 - 31) */
+#define TXSE 0x0100 /* TX Secondary Enable */
+#define TSFSE 0x0200 /* Transmit Stereo Frame Sync Enable */
+#define TRFST 0x0400 /* Left/Right Order (1 = Right Channel 1st) */
+
+/* SPORTx_RCR1 Masks */
+#define RSPEN 0x0001 /* Receive Enable */
+#define IRCLK 0x0002 /* Internal Receive Clock Select */
+#define DTYPE_NORM 0x0004 /* Data Format Normal */
+#define DTYPE_ULAW 0x0008 /* Compand Using u-Law */
+#define DTYPE_ALAW 0x000C /* Compand Using A-Law */
+#define RLSBIT 0x0010 /* Receive Bit Order */
+#define IRFS 0x0200 /* Internal Receive Frame Sync Select */
+#define RFSR 0x0400 /* Receive Frame Sync Required Select */
+#define LRFS 0x1000 /* Low Receive Frame Sync Select */
+#define LARFS 0x2000 /* Late Receive Frame Sync Select */
+#define RCKFE 0x4000 /* Clock Falling Edge Select */
+
+/* SPORTx_RCR2 Masks */
+#define SLEN(x) ((x)&0x1F) /* SPORT RX Word Length (2 - 31) */
+#define RXSE 0x0100 /* RX Secondary Enable */
+#define RSFSE 0x0200 /* RX Stereo Frame Sync Enable */
+#define RRFST 0x0400 /* Right-First Data Order */
+
+/* SPORTx_STAT Masks */
+#define RXNE 0x0001 /* Receive FIFO Not Empty Status */
+#define RUVF 0x0002 /* Sticky Receive Underflow Status */
+#define ROVF 0x0004 /* Sticky Receive Overflow Status */
+#define TXF 0x0008 /* Transmit FIFO Full Status */
+#define TUVF 0x0010 /* Sticky Transmit Underflow Status */
+#define TOVF 0x0020 /* Sticky Transmit Overflow Status */
+#define TXHRE 0x0040 /* Transmit Hold Register Empty */
+
+/* SPORTx_MCMC1 Macros */
+#define SP_WOFF(x) ((x) & 0x3FF) /* Multichannel Window Offset Field */
+
+/* Only use WSIZE Macro With Logic OR While Setting Lower Order Bits */
+#define SP_WSIZE(x) (((((x)>>0x3)-1)&0xF) << 0xC) /* Multichannel Window Size = (x/8)-1 */
+
+/* SPORTx_MCMC2 Masks */
+#define REC_BYPASS 0x0000 /* Bypass Mode (No Clock Recovery) */
+#define REC_2FROM4 0x0002 /* Recover 2 MHz Clock from 4 MHz Clock */
+#define REC_8FROM16 0x0003 /* Recover 8 MHz Clock from 16 MHz Clock */
+#define MCDTXPE 0x0004 /* Multichannel DMA Transmit Packing */
+#define MCDRXPE 0x0008 /* Multichannel DMA Receive Packing */
+#define MCMEN 0x0010 /* Multichannel Frame Mode Enable */
+#define FSDR 0x0080 /* Multichannel Frame Sync to Data Relationship */
+#define MFD_0 0x0000 /* Multichannel Frame Delay = 0 */
+#define MFD_1 0x1000 /* Multichannel Frame Delay = 1 */
+#define MFD_2 0x2000 /* Multichannel Frame Delay = 2 */
+#define MFD_3 0x3000 /* Multichannel Frame Delay = 3 */
+#define MFD_4 0x4000 /* Multichannel Frame Delay = 4 */
+#define MFD_5 0x5000 /* Multichannel Frame Delay = 5 */
+#define MFD_6 0x6000 /* Multichannel Frame Delay = 6 */
+#define MFD_7 0x7000 /* Multichannel Frame Delay = 7 */
+#define MFD_8 0x8000 /* Multichannel Frame Delay = 8 */
+#define MFD_9 0x9000 /* Multichannel Frame Delay = 9 */
+#define MFD_10 0xA000 /* Multichannel Frame Delay = 10 */
+#define MFD_11 0xB000 /* Multichannel Frame Delay = 11 */
+#define MFD_12 0xC000 /* Multichannel Frame Delay = 12 */
+#define MFD_13 0xD000 /* Multichannel Frame Delay = 13 */
+#define MFD_14 0xE000 /* Multichannel Frame Delay = 14 */
+#define MFD_15 0xF000 /* Multichannel Frame Delay = 15 */
+
+/* ********************* ASYNCHRONOUS MEMORY CONTROLLER MASKS *************************/
+/* EBIU_AMGCTL Masks */
+#define AMCKEN 0x0001 /* Enable CLKOUT */
+#define AMBEN_NONE 0x0000 /* All Banks Disabled */
+#define AMBEN_B0 0x0002 /* Enable Async Memory Bank 0 only */
+#define AMBEN_B0_B1 0x0004 /* Enable Async Memory Banks 0 & 1 only */
+#define AMBEN_B0_B1_B2 0x0006 /* Enable Async Memory Banks 0, 1, and 2 */
+#define AMBEN_ALL 0x0008 /* Enable Async Memory Banks (all) 0, 1, 2, and 3 */
+
+/* EBIU_AMBCTL0 Masks */
+#define B0RDYEN 0x00000001 /* Bank 0 (B0) RDY Enable */
+#define B0RDYPOL 0x00000002 /* B0 RDY Active High */
+#define B0TT_1 0x00000004 /* B0 Transition Time (Read to Write) = 1 cycle */
+#define B0TT_2 0x00000008 /* B0 Transition Time (Read to Write) = 2 cycles */
+#define B0TT_3 0x0000000C /* B0 Transition Time (Read to Write) = 3 cycles */
+#define B0TT_4 0x00000000 /* B0 Transition Time (Read to Write) = 4 cycles */
+#define B0ST_1 0x00000010 /* B0 Setup Time (AOE to Read/Write) = 1 cycle */
+#define B0ST_2 0x00000020 /* B0 Setup Time (AOE to Read/Write) = 2 cycles */
+#define B0ST_3 0x00000030 /* B0 Setup Time (AOE to Read/Write) = 3 cycles */
+#define B0ST_4 0x00000000 /* B0 Setup Time (AOE to Read/Write) = 4 cycles */
+#define B0HT_1 0x00000040 /* B0 Hold Time (~Read/Write to ~AOE) = 1 cycle */
+#define B0HT_2 0x00000080 /* B0 Hold Time (~Read/Write to ~AOE) = 2 cycles */
+#define B0HT_3 0x000000C0 /* B0 Hold Time (~Read/Write to ~AOE) = 3 cycles */
+#define B0HT_0 0x00000000 /* B0 Hold Time (~Read/Write to ~AOE) = 0 cycles */
+#define B0RAT_1 0x00000100 /* B0 Read Access Time = 1 cycle */
+#define B0RAT_2 0x00000200 /* B0 Read Access Time = 2 cycles */
+#define B0RAT_3 0x00000300 /* B0 Read Access Time = 3 cycles */
+#define B0RAT_4 0x00000400 /* B0 Read Access Time = 4 cycles */
+#define B0RAT_5 0x00000500 /* B0 Read Access Time = 5 cycles */
+#define B0RAT_6 0x00000600 /* B0 Read Access Time = 6 cycles */
+#define B0RAT_7 0x00000700 /* B0 Read Access Time = 7 cycles */
+#define B0RAT_8 0x00000800 /* B0 Read Access Time = 8 cycles */
+#define B0RAT_9 0x00000900 /* B0 Read Access Time = 9 cycles */
+#define B0RAT_10 0x00000A00 /* B0 Read Access Time = 10 cycles */
+#define B0RAT_11 0x00000B00 /* B0 Read Access Time = 11 cycles */
+#define B0RAT_12 0x00000C00 /* B0 Read Access Time = 12 cycles */
+#define B0RAT_13 0x00000D00 /* B0 Read Access Time = 13 cycles */
+#define B0RAT_14 0x00000E00 /* B0 Read Access Time = 14 cycles */
+#define B0RAT_15 0x00000F00 /* B0 Read Access Time = 15 cycles */
+#define B0WAT_1 0x00001000 /* B0 Write Access Time = 1 cycle */
+#define B0WAT_2 0x00002000 /* B0 Write Access Time = 2 cycles */
+#define B0WAT_3 0x00003000 /* B0 Write Access Time = 3 cycles */
+#define B0WAT_4 0x00004000 /* B0 Write Access Time = 4 cycles */
+#define B0WAT_5 0x00005000 /* B0 Write Access Time = 5 cycles */
+#define B0WAT_6 0x00006000 /* B0 Write Access Time = 6 cycles */
+#define B0WAT_7 0x00007000 /* B0 Write Access Time = 7 cycles */
+#define B0WAT_8 0x00008000 /* B0 Write Access Time = 8 cycles */
+#define B0WAT_9 0x00009000 /* B0 Write Access Time = 9 cycles */
+#define B0WAT_10 0x0000A000 /* B0 Write Access Time = 10 cycles */
+#define B0WAT_11 0x0000B000 /* B0 Write Access Time = 11 cycles */
+#define B0WAT_12 0x0000C000 /* B0 Write Access Time = 12 cycles */
+#define B0WAT_13 0x0000D000 /* B0 Write Access Time = 13 cycles */
+#define B0WAT_14 0x0000E000 /* B0 Write Access Time = 14 cycles */
+#define B0WAT_15 0x0000F000 /* B0 Write Access Time = 15 cycles */
+
+#define B1RDYEN 0x00010000 /* Bank 1 (B1) RDY Enable */
+#define B1RDYPOL 0x00020000 /* B1 RDY Active High */
+#define B1TT_1 0x00040000 /* B1 Transition Time (Read to Write) = 1 cycle */
+#define B1TT_2 0x00080000 /* B1 Transition Time (Read to Write) = 2 cycles */
+#define B1TT_3 0x000C0000 /* B1 Transition Time (Read to Write) = 3 cycles */
+#define B1TT_4 0x00000000 /* B1 Transition Time (Read to Write) = 4 cycles */
+#define B1ST_1 0x00100000 /* B1 Setup Time (AOE to Read/Write) = 1 cycle */
+#define B1ST_2 0x00200000 /* B1 Setup Time (AOE to Read/Write) = 2 cycles */
+#define B1ST_3 0x00300000 /* B1 Setup Time (AOE to Read/Write) = 3 cycles */
+#define B1ST_4 0x00000000 /* B1 Setup Time (AOE to Read/Write) = 4 cycles */
+#define B1HT_1 0x00400000 /* B1 Hold Time (~Read/Write to ~AOE) = 1 cycle */
+#define B1HT_2 0x00800000 /* B1 Hold Time (~Read/Write to ~AOE) = 2 cycles */
+#define B1HT_3 0x00C00000 /* B1 Hold Time (~Read/Write to ~AOE) = 3 cycles */
+#define B1HT_0 0x00000000 /* B1 Hold Time (~Read/Write to ~AOE) = 0 cycles */
+#define B1RAT_1 0x01000000 /* B1 Read Access Time = 1 cycle */
+#define B1RAT_2 0x02000000 /* B1 Read Access Time = 2 cycles */
+#define B1RAT_3 0x03000000 /* B1 Read Access Time = 3 cycles */
+#define B1RAT_4 0x04000000 /* B1 Read Access Time = 4 cycles */
+#define B1RAT_5 0x05000000 /* B1 Read Access Time = 5 cycles */
+#define B1RAT_6 0x06000000 /* B1 Read Access Time = 6 cycles */
+#define B1RAT_7 0x07000000 /* B1 Read Access Time = 7 cycles */
+#define B1RAT_8 0x08000000 /* B1 Read Access Time = 8 cycles */
+#define B1RAT_9 0x09000000 /* B1 Read Access Time = 9 cycles */
+#define B1RAT_10 0x0A000000 /* B1 Read Access Time = 10 cycles */
+#define B1RAT_11 0x0B000000 /* B1 Read Access Time = 11 cycles */
+#define B1RAT_12 0x0C000000 /* B1 Read Access Time = 12 cycles */
+#define B1RAT_13 0x0D000000 /* B1 Read Access Time = 13 cycles */
+#define B1RAT_14 0x0E000000 /* B1 Read Access Time = 14 cycles */
+#define B1RAT_15 0x0F000000 /* B1 Read Access Time = 15 cycles */
+#define B1WAT_1 0x10000000 /* B1 Write Access Time = 1 cycle */
+#define B1WAT_2 0x20000000 /* B1 Write Access Time = 2 cycles */
+#define B1WAT_3 0x30000000 /* B1 Write Access Time = 3 cycles */
+#define B1WAT_4 0x40000000 /* B1 Write Access Time = 4 cycles */
+#define B1WAT_5 0x50000000 /* B1 Write Access Time = 5 cycles */
+#define B1WAT_6 0x60000000 /* B1 Write Access Time = 6 cycles */
+#define B1WAT_7 0x70000000 /* B1 Write Access Time = 7 cycles */
+#define B1WAT_8 0x80000000 /* B1 Write Access Time = 8 cycles */
+#define B1WAT_9 0x90000000 /* B1 Write Access Time = 9 cycles */
+#define B1WAT_10 0xA0000000 /* B1 Write Access Time = 10 cycles */
+#define B1WAT_11 0xB0000000 /* B1 Write Access Time = 11 cycles */
+#define B1WAT_12 0xC0000000 /* B1 Write Access Time = 12 cycles */
+#define B1WAT_13 0xD0000000 /* B1 Write Access Time = 13 cycles */
+#define B1WAT_14 0xE0000000 /* B1 Write Access Time = 14 cycles */
+#define B1WAT_15 0xF0000000 /* B1 Write Access Time = 15 cycles */
+
+/* EBIU_AMBCTL1 Masks */
+#define B2RDYEN 0x00000001 /* Bank 2 (B2) RDY Enable */
+#define B2RDYPOL 0x00000002 /* B2 RDY Active High */
+#define B2TT_1 0x00000004 /* B2 Transition Time (Read to Write) = 1 cycle */
+#define B2TT_2 0x00000008 /* B2 Transition Time (Read to Write) = 2 cycles */
+#define B2TT_3 0x0000000C /* B2 Transition Time (Read to Write) = 3 cycles */
+#define B2TT_4 0x00000000 /* B2 Transition Time (Read to Write) = 4 cycles */
+#define B2ST_1 0x00000010 /* B2 Setup Time (AOE to Read/Write) = 1 cycle */
+#define B2ST_2 0x00000020 /* B2 Setup Time (AOE to Read/Write) = 2 cycles */
+#define B2ST_3 0x00000030 /* B2 Setup Time (AOE to Read/Write) = 3 cycles */
+#define B2ST_4 0x00000000 /* B2 Setup Time (AOE to Read/Write) = 4 cycles */
+#define B2HT_1 0x00000040 /* B2 Hold Time (~Read/Write to ~AOE) = 1 cycle */
+#define B2HT_2 0x00000080 /* B2 Hold Time (~Read/Write to ~AOE) = 2 cycles */
+#define B2HT_3 0x000000C0 /* B2 Hold Time (~Read/Write to ~AOE) = 3 cycles */
+#define B2HT_0 0x00000000 /* B2 Hold Time (~Read/Write to ~AOE) = 0 cycles */
+#define B2RAT_1 0x00000100 /* B2 Read Access Time = 1 cycle */
+#define B2RAT_2 0x00000200 /* B2 Read Access Time = 2 cycles */
+#define B2RAT_3 0x00000300 /* B2 Read Access Time = 3 cycles */
+#define B2RAT_4 0x00000400 /* B2 Read Access Time = 4 cycles */
+#define B2RAT_5 0x00000500 /* B2 Read Access Time = 5 cycles */
+#define B2RAT_6 0x00000600 /* B2 Read Access Time = 6 cycles */
+#define B2RAT_7 0x00000700 /* B2 Read Access Time = 7 cycles */
+#define B2RAT_8 0x00000800 /* B2 Read Access Time = 8 cycles */
+#define B2RAT_9 0x00000900 /* B2 Read Access Time = 9 cycles */
+#define B2RAT_10 0x00000A00 /* B2 Read Access Time = 10 cycles */
+#define B2RAT_11 0x00000B00 /* B2 Read Access Time = 11 cycles */
+#define B2RAT_12 0x00000C00 /* B2 Read Access Time = 12 cycles */
+#define B2RAT_13 0x00000D00 /* B2 Read Access Time = 13 cycles */
+#define B2RAT_14 0x00000E00 /* B2 Read Access Time = 14 cycles */
+#define B2RAT_15 0x00000F00 /* B2 Read Access Time = 15 cycles */
+#define B2WAT_1 0x00001000 /* B2 Write Access Time = 1 cycle */
+#define B2WAT_2 0x00002000 /* B2 Write Access Time = 2 cycles */
+#define B2WAT_3 0x00003000 /* B2 Write Access Time = 3 cycles */
+#define B2WAT_4 0x00004000 /* B2 Write Access Time = 4 cycles */
+#define B2WAT_5 0x00005000 /* B2 Write Access Time = 5 cycles */
+#define B2WAT_6 0x00006000 /* B2 Write Access Time = 6 cycles */
+#define B2WAT_7 0x00007000 /* B2 Write Access Time = 7 cycles */
+#define B2WAT_8 0x00008000 /* B2 Write Access Time = 8 cycles */
+#define B2WAT_9 0x00009000 /* B2 Write Access Time = 9 cycles */
+#define B2WAT_10 0x0000A000 /* B2 Write Access Time = 10 cycles */
+#define B2WAT_11 0x0000B000 /* B2 Write Access Time = 11 cycles */
+#define B2WAT_12 0x0000C000 /* B2 Write Access Time = 12 cycles */
+#define B2WAT_13 0x0000D000 /* B2 Write Access Time = 13 cycles */
+#define B2WAT_14 0x0000E000 /* B2 Write Access Time = 14 cycles */
+#define B2WAT_15 0x0000F000 /* B2 Write Access Time = 15 cycles */
+
+#define B3RDYEN 0x00010000 /* Bank 3 (B3) RDY Enable */
+#define B3RDYPOL 0x00020000 /* B3 RDY Active High */
+#define B3TT_1 0x00040000 /* B3 Transition Time (Read to Write) = 1 cycle */
+#define B3TT_2 0x00080000 /* B3 Transition Time (Read to Write) = 2 cycles */
+#define B3TT_3 0x000C0000 /* B3 Transition Time (Read to Write) = 3 cycles */
+#define B3TT_4 0x00000000 /* B3 Transition Time (Read to Write) = 4 cycles */
+#define B3ST_1 0x00100000 /* B3 Setup Time (AOE to Read/Write) = 1 cycle */
+#define B3ST_2 0x00200000 /* B3 Setup Time (AOE to Read/Write) = 2 cycles */
+#define B3ST_3 0x00300000 /* B3 Setup Time (AOE to Read/Write) = 3 cycles */
+#define B3ST_4 0x00000000 /* B3 Setup Time (AOE to Read/Write) = 4 cycles */
+#define B3HT_1 0x00400000 /* B3 Hold Time (~Read/Write to ~AOE) = 1 cycle */
+#define B3HT_2 0x00800000 /* B3 Hold Time (~Read/Write to ~AOE) = 2 cycles */
+#define B3HT_3 0x00C00000 /* B3 Hold Time (~Read/Write to ~AOE) = 3 cycles */
+#define B3HT_0 0x00000000 /* B3 Hold Time (~Read/Write to ~AOE) = 0 cycles */
+#define B3RAT_1 0x01000000 /* B3 Read Access Time = 1 cycle */
+#define B3RAT_2 0x02000000 /* B3 Read Access Time = 2 cycles */
+#define B3RAT_3 0x03000000 /* B3 Read Access Time = 3 cycles */
+#define B3RAT_4 0x04000000 /* B3 Read Access Time = 4 cycles */
+#define B3RAT_5 0x05000000 /* B3 Read Access Time = 5 cycles */
+#define B3RAT_6 0x06000000 /* B3 Read Access Time = 6 cycles */
+#define B3RAT_7 0x07000000 /* B3 Read Access Time = 7 cycles */
+#define B3RAT_8 0x08000000 /* B3 Read Access Time = 8 cycles */
+#define B3RAT_9 0x09000000 /* B3 Read Access Time = 9 cycles */
+#define B3RAT_10 0x0A000000 /* B3 Read Access Time = 10 cycles */
+#define B3RAT_11 0x0B000000 /* B3 Read Access Time = 11 cycles */
+#define B3RAT_12 0x0C000000 /* B3 Read Access Time = 12 cycles */
+#define B3RAT_13 0x0D000000 /* B3 Read Access Time = 13 cycles */
+#define B3RAT_14 0x0E000000 /* B3 Read Access Time = 14 cycles */
+#define B3RAT_15 0x0F000000 /* B3 Read Access Time = 15 cycles */
+#define B3WAT_1 0x10000000 /* B3 Write Access Time = 1 cycle */
+#define B3WAT_2 0x20000000 /* B3 Write Access Time = 2 cycles */
+#define B3WAT_3 0x30000000 /* B3 Write Access Time = 3 cycles */
+#define B3WAT_4 0x40000000 /* B3 Write Access Time = 4 cycles */
+#define B3WAT_5 0x50000000 /* B3 Write Access Time = 5 cycles */
+#define B3WAT_6 0x60000000 /* B3 Write Access Time = 6 cycles */
+#define B3WAT_7 0x70000000 /* B3 Write Access Time = 7 cycles */
+#define B3WAT_8 0x80000000 /* B3 Write Access Time = 8 cycles */
+#define B3WAT_9 0x90000000 /* B3 Write Access Time = 9 cycles */
+#define B3WAT_10 0xA0000000 /* B3 Write Access Time = 10 cycles */
+#define B3WAT_11 0xB0000000 /* B3 Write Access Time = 11 cycles */
+#define B3WAT_12 0xC0000000 /* B3 Write Access Time = 12 cycles */
+#define B3WAT_13 0xD0000000 /* B3 Write Access Time = 13 cycles */
+#define B3WAT_14 0xE0000000 /* B3 Write Access Time = 14 cycles */
+#define B3WAT_15 0xF0000000 /* B3 Write Access Time = 15 cycles */
+
+/* ********************** SDRAM CONTROLLER MASKS **********************************************/
+/* EBIU_SDGCTL Masks */
+#define SCTLE 0x00000001 /* Enable SDRAM Signals */
+#define CL_2 0x00000008 /* SDRAM CAS Latency = 2 cycles */
+#define CL_3 0x0000000C /* SDRAM CAS Latency = 3 cycles */
+#define PASR_ALL 0x00000000 /* All 4 SDRAM Banks Refreshed In Self-Refresh */
+#define PASR_B0_B1 0x00000010 /* SDRAM Banks 0 and 1 Are Refreshed In Self-Refresh */
+#define PASR_B0 0x00000020 /* Only SDRAM Bank 0 Is Refreshed In Self-Refresh */
+#define TRAS_1 0x00000040 /* SDRAM tRAS = 1 cycle */
+#define TRAS_2 0x00000080 /* SDRAM tRAS = 2 cycles */
+#define TRAS_3 0x000000C0 /* SDRAM tRAS = 3 cycles */
+#define TRAS_4 0x00000100 /* SDRAM tRAS = 4 cycles */
+#define TRAS_5 0x00000140 /* SDRAM tRAS = 5 cycles */
+#define TRAS_6 0x00000180 /* SDRAM tRAS = 6 cycles */
+#define TRAS_7 0x000001C0 /* SDRAM tRAS = 7 cycles */
+#define TRAS_8 0x00000200 /* SDRAM tRAS = 8 cycles */
+#define TRAS_9 0x00000240 /* SDRAM tRAS = 9 cycles */
+#define TRAS_10 0x00000280 /* SDRAM tRAS = 10 cycles */
+#define TRAS_11 0x000002C0 /* SDRAM tRAS = 11 cycles */
+#define TRAS_12 0x00000300 /* SDRAM tRAS = 12 cycles */
+#define TRAS_13 0x00000340 /* SDRAM tRAS = 13 cycles */
+#define TRAS_14 0x00000380 /* SDRAM tRAS = 14 cycles */
+#define TRAS_15 0x000003C0 /* SDRAM tRAS = 15 cycles */
+#define TRP_1 0x00000800 /* SDRAM tRP = 1 cycle */
+#define TRP_2 0x00001000 /* SDRAM tRP = 2 cycles */
+#define TRP_3 0x00001800 /* SDRAM tRP = 3 cycles */
+#define TRP_4 0x00002000 /* SDRAM tRP = 4 cycles */
+#define TRP_5 0x00002800 /* SDRAM tRP = 5 cycles */
+#define TRP_6 0x00003000 /* SDRAM tRP = 6 cycles */
+#define TRP_7 0x00003800 /* SDRAM tRP = 7 cycles */
+#define TRCD_1 0x00008000 /* SDRAM tRCD = 1 cycle */
+#define TRCD_2 0x00010000 /* SDRAM tRCD = 2 cycles */
+#define TRCD_3 0x00018000 /* SDRAM tRCD = 3 cycles */
+#define TRCD_4 0x00020000 /* SDRAM tRCD = 4 cycles */
+#define TRCD_5 0x00028000 /* SDRAM tRCD = 5 cycles */
+#define TRCD_6 0x00030000 /* SDRAM tRCD = 6 cycles */
+#define TRCD_7 0x00038000 /* SDRAM tRCD = 7 cycles */
+#define TWR_1 0x00080000 /* SDRAM tWR = 1 cycle */
+#define TWR_2 0x00100000 /* SDRAM tWR = 2 cycles */
+#define TWR_3 0x00180000 /* SDRAM tWR = 3 cycles */
+#define PUPSD 0x00200000 /* Power-Up Start Delay (15 SCLK Cycles Delay) */
+#define PSM 0x00400000 /* Power-Up Sequence (Mode Register Before/After* Refresh) */
+#define PSS 0x00800000 /* Enable Power-Up Sequence on Next SDRAM Access */
+#define SRFS 0x01000000 /* Enable SDRAM Self-Refresh Mode */
+#define EBUFE 0x02000000 /* Enable External Buffering Timing */
+#define FBBRW 0x04000000 /* Enable Fast Back-To-Back Read To Write */
+#define EMREN 0x10000000 /* Extended Mode Register Enable */
+#define TCSR 0x20000000 /* Temp-Compensated Self-Refresh Value (85/45* Deg C) */
+#define CDDBG 0x40000000 /* Tristate SDRAM Controls During Bus Grant */
+
+/* EBIU_SDBCTL Masks */
+#define EBE 0x0001 /* Enable SDRAM External Bank */
+#define EBSZ_16 0x0000 /* SDRAM External Bank Size = 16MB */
+#define EBSZ_32 0x0002 /* SDRAM External Bank Size = 32MB */
+#define EBSZ_64 0x0004 /* SDRAM External Bank Size = 64MB */
+#define EBSZ_128 0x0006 /* SDRAM External Bank Size = 128MB */
+#define EBCAW_8 0x0000 /* SDRAM External Bank Column Address Width = 8 Bits */
+#define EBCAW_9 0x0010 /* SDRAM External Bank Column Address Width = 9 Bits */
+#define EBCAW_10 0x0020 /* SDRAM External Bank Column Address Width = 10 Bits */
+#define EBCAW_11 0x0030 /* SDRAM External Bank Column Address Width = 11 Bits */
+
+/* EBIU_SDSTAT Masks */
+#define SDCI 0x0001 /* SDRAM Controller Idle */
+#define SDSRA 0x0002 /* SDRAM Self-Refresh Active */
+#define SDPUA 0x0004 /* SDRAM Power-Up Active */
+#define SDRS 0x0008 /* SDRAM Will Power-Up On Next Access */
+#define SDEASE 0x0010 /* SDRAM EAB Sticky Error Status */
+#define BGSTAT 0x0020 /* Bus Grant Status */
+
+/* ************************** DMA CONTROLLER MASKS ********************************/
+/* DMAx_CONFIG, MDMA_yy_CONFIG Masks */
+#define DMAEN 0x0001 /* DMA Channel Enable */
+#define WNR 0x0002 /* Channel Direction (W/R*) */
+#define WDSIZE_8 0x0000 /* Transfer Word Size = 8 */
+#define WDSIZE_16 0x0004 /* Transfer Word Size = 16 */
+#define WDSIZE_32 0x0008 /* Transfer Word Size = 32 */
+#define DMA2D 0x0010 /* DMA Mode (2D/1D*) */
+#define RESTART 0x0020 /* DMA Buffer Clear */
+#define DI_SEL 0x0040 /* Data Interrupt Timing Select */
+#define DI_EN 0x0080 /* Data Interrupt Enable */
+#define NDSIZE_0 0x0000 /* Next Descriptor Size = 0 (Stop/Autobuffer) */
+#define NDSIZE_1 0x0100 /* Next Descriptor Size = 1 */
+#define NDSIZE_2 0x0200 /* Next Descriptor Size = 2 */
+#define NDSIZE_3 0x0300 /* Next Descriptor Size = 3 */
+#define NDSIZE_4 0x0400 /* Next Descriptor Size = 4 */
+#define NDSIZE_5 0x0500 /* Next Descriptor Size = 5 */
+#define NDSIZE_6 0x0600 /* Next Descriptor Size = 6 */
+#define NDSIZE_7 0x0700 /* Next Descriptor Size = 7 */
+#define NDSIZE_8 0x0800 /* Next Descriptor Size = 8 */
+#define NDSIZE_9 0x0900 /* Next Descriptor Size = 9 */
+#define NDSIZE 0x0900 /* Next Descriptor Size */
+
+#define DMAFLOW 0x7000 /* Flow Control */
+#define DMAFLOW_STOP 0x0000 /* Stop Mode */
+#define DMAFLOW_AUTO 0x1000 /* Autobuffer Mode */
+#define DMAFLOW_ARRAY 0x4000 /* Descriptor Array Mode */
+#define DMAFLOW_SMALL 0x6000 /* Small Model Descriptor List Mode */
+#define DMAFLOW_LARGE 0x7000 /* Large Model Descriptor List Mode */
+
+/* DMAx_PERIPHERAL_MAP, MDMA_yy_PERIPHERAL_MAP Masks */
+#define CTYPE 0x0040 /* DMA Channel Type Indicator (Memory/Peripheral*) */
+#define PMAP 0xF000 /* Peripheral Mapped To This Channel */
+#define PMAP_PPI 0x0000 /* PPI Port DMA */
+#define PMAP_EMACRX 0x1000 /* Ethernet Receive DMA */
+#define PMAP_EMACTX 0x2000 /* Ethernet Transmit DMA */
+#define PMAP_SPORT0RX 0x3000 /* SPORT0 Receive DMA */
+#define PMAP_SPORT0TX 0x4000 /* SPORT0 Transmit DMA */
+#define PMAP_SPORT1RX 0x5000 /* SPORT1 Receive DMA */
+#define PMAP_SPORT1TX 0x6000 /* SPORT1 Transmit DMA */
+#define PMAP_SPI 0x7000 /* SPI Port DMA */
+#define PMAP_UART0RX 0x8000 /* UART0 Port Receive DMA */
+#define PMAP_UART0TX 0x9000 /* UART0 Port Transmit DMA */
+#define PMAP_UART1RX 0xA000 /* UART1 Port Receive DMA */
+#define PMAP_UART1TX 0xB000 /* UART1 Port Transmit DMA */
+
+/* DMAx_IRQ_STATUS, MDMA_yy_IRQ_STATUS Masks */
+#define DMA_DONE 0x0001 /* DMA Completion Interrupt Status */
+#define DMA_ERR 0x0002 /* DMA Error Interrupt Status */
+#define DFETCH 0x0004 /* DMA Descriptor Fetch Indicator */
+#define DMA_RUN 0x0008 /* DMA Channel Running Indicator */
+
+/* ************ PARALLEL PERIPHERAL INTERFACE (PPI) MASKS *************/
+/* PPI_CONTROL Masks */
+#define PORT_EN 0x0001 /* PPI Port Enable */
+#define PORT_DIR 0x0002 /* PPI Port Direction */
+#define XFR_TYPE 0x000C /* PPI Transfer Type */
+#define PORT_CFG 0x0030 /* PPI Port Configuration */
+#define FLD_SEL 0x0040 /* PPI Active Field Select */
+#define PACK_EN 0x0080 /* PPI Packing Mode */
+#define DMA32 0x0100 /* PPI 32-bit DMA Enable */
+#define SKIP_EN 0x0200 /* PPI Skip Element Enable */
+#define SKIP_EO 0x0400 /* PPI Skip Even/Odd Elements */
+#define DLENGTH 0x3800 /* PPI Data Length */
+#define DLEN_8 0x0000 /* Data Length = 8 Bits */
+#define DLEN_10 0x0800 /* Data Length = 10 Bits */
+#define DLEN_11 0x1000 /* Data Length = 11 Bits */
+#define DLEN_12 0x1800 /* Data Length = 12 Bits */
+#define DLEN_13 0x2000 /* Data Length = 13 Bits */
+#define DLEN_14 0x2800 /* Data Length = 14 Bits */
+#define DLEN_15 0x3000 /* Data Length = 15 Bits */
+#define DLEN_16 0x3800 /* Data Length = 16 Bits */
+#define POLC 0x4000 /* PPI Clock Polarity */
+#define POLS 0x8000 /* PPI Frame Sync Polarity */
+
+/* PPI_STATUS Masks */
+#define FLD 0x0400 /* Field Indicator */
+#define FT_ERR 0x0800 /* Frame Track Error */
+#define OVR 0x1000 /* FIFO Overflow Error */
+#define UNDR 0x2000 /* FIFO Underrun Error */
+#define ERR_DET 0x4000 /* Error Detected Indicator */
+#define ERR_NCOR 0x8000 /* Error Not Corrected Indicator */
+
+/* ******************** TWO-WIRE INTERFACE (TWI) MASKS ***********************/
+/* TWI_CLKDIV Macros (Use: *pTWI_CLKDIV = CLKLOW(x)|CLKHI(y); ) */
+#define CLKLOW(x) ((x) & 0xFF) /* Periods Clock Is Held Low */
+#define CLKHI(y) (((y)&0xFF)<<0x8) /* Periods Before New Clock Low */
+
+/* TWI_PRESCALE Masks */
+#define PRESCALE 0x007F /* SCLKs Per Internal Time Reference (10MHz) */
+#define TWI_ENA 0x0080 /* TWI Enable */
+#define SCCB 0x0200 /* SCCB Compatibility Enable */
+
+/* TWI_SLAVE_CTRL Masks */
+#define SEN 0x0001 /* Slave Enable */
+#define SADD_LEN 0x0002 /* Slave Address Length */
+#define STDVAL 0x0004 /* Slave Transmit Data Valid */
+#define NAK 0x0008 /* NAK/ACK* Generated At Conclusion Of Transfer */
+#define GEN 0x0010 /* General Call Adrress Matching Enabled */
+
+/* TWI_SLAVE_STAT Masks */
+#define SDIR 0x0001 /* Slave Transfer Direction (Transmit/Receive*) */
+#define GCALL 0x0002 /* General Call Indicator */
+
+/* TWI_MASTER_CTRL Masks */
+#define MEN 0x0001 /* Master Mode Enable */
+#define MADD_LEN 0x0002 /* Master Address Length */
+#define MDIR 0x0004 /* Master Transmit Direction (RX/TX*) */
+#define FAST 0x0008 /* Use Fast Mode Timing Specs */
+#define STOP 0x0010 /* Issue Stop Condition */
+#define RSTART 0x0020 /* Repeat Start or Stop* At End Of Transfer */
+#define DCNT 0x3FC0 /* Data Bytes To Transfer */
+#define SDAOVR 0x4000 /* Serial Data Override */
+#define SCLOVR 0x8000 /* Serial Clock Override */
+
+/* TWI_MASTER_STAT Masks */
+#define MPROG 0x0001 /* Master Transfer In Progress */
+#define LOSTARB 0x0002 /* Lost Arbitration Indicator (Xfer Aborted) */
+#define ANAK 0x0004 /* Address Not Acknowledged */
+#define DNAK 0x0008 /* Data Not Acknowledged */
+#define BUFRDERR 0x0010 /* Buffer Read Error */
+#define BUFWRERR 0x0020 /* Buffer Write Error */
+#define SDASEN 0x0040 /* Serial Data Sense */
+#define SCLSEN 0x0080 /* Serial Clock Sense */
+#define BUSBUSY 0x0100 /* Bus Busy Indicator */
+
+/* TWI_INT_SRC and TWI_INT_ENABLE Masks */
+#define SINIT 0x0001 /* Slave Transfer Initiated */
+#define SCOMP 0x0002 /* Slave Transfer Complete */
+#define SERR 0x0004 /* Slave Transfer Error */
+#define SOVF 0x0008 /* Slave Overflow */
+#define MCOMP 0x0010 /* Master Transfer Complete */
+#define MERR 0x0020 /* Master Transfer Error */
+#define XMTSERV 0x0040 /* Transmit FIFO Service */
+#define RCVSERV 0x0080 /* Receive FIFO Service */
+
+/* TWI_FIFO_CTRL Masks */
+#define XMTFLUSH 0x0001 /* Transmit Buffer Flush */
+#define RCVFLUSH 0x0002 /* Receive Buffer Flush */
+#define XMTINTLEN 0x0004 /* Transmit Buffer Interrupt Length */
+#define RCVINTLEN 0x0008 /* Receive Buffer Interrupt Length */
+
+/* TWI_FIFO_STAT Masks */
+#define XMTSTAT 0x0003 /* Transmit FIFO Status */
+#define XMT_EMPTY 0x0000 /* Transmit FIFO Empty */
+#define XMT_HALF 0x0001 /* Transmit FIFO Has 1 Byte To Write */
+#define XMT_FULL 0x0003 /* Transmit FIFO Full (2 Bytes To Write) */
+
+#define RCVSTAT 0x000C /* Receive FIFO Status */
+#define RCV_EMPTY 0x0000 /* Receive FIFO Empty */
+#define RCV_HALF 0x0004 /* Receive FIFO Has 1 Byte To Read */
+#define RCV_FULL 0x000C /* Receive FIFO Full (2 Bytes To Read) */
+
+/* ************ CONTROLLER AREA NETWORK (CAN) MASKS ***************/
+/* CAN_CONTROL Masks */
+#define SRS 0x0001 /* Software Reset */
+#define DNM 0x0002 /* Device Net Mode */
+#define ABO 0x0004 /* Auto-Bus On Enable */
+#define TXPRIO 0x0008 /* TX Priority (Priority/Mailbox*) */
+#define WBA 0x0010 /* Wake-Up On CAN Bus Activity Enable */
+#define SMR 0x0020 /* Sleep Mode Request */
+#define CSR 0x0040 /* CAN Suspend Mode Request */
+#define CCR 0x0080 /* CAN Configuration Mode Request */
+
+/* CAN_STATUS Masks */
+#define WT 0x0001 /* TX Warning Flag */
+#define WR 0x0002 /* RX Warning Flag */
+#define EP 0x0004 /* Error Passive Mode */
+#define EBO 0x0008 /* Error Bus Off Mode */
+#define SMA 0x0020 /* Sleep Mode Acknowledge */
+#define CSA 0x0040 /* Suspend Mode Acknowledge */
+#define CCA 0x0080 /* Configuration Mode Acknowledge */
+#define MBPTR 0x1F00 /* Mailbox Pointer */
+#define TRM 0x4000 /* Transmit Mode */
+#define REC 0x8000 /* Receive Mode */
+
+/* CAN_CLOCK Masks */
+#define BRP 0x03FF /* Bit-Rate Pre-Scaler */
+
+/* CAN_TIMING Masks */
+#define TSEG1 0x000F /* Time Segment 1 */
+#define TSEG2 0x0070 /* Time Segment 2 */
+#define SAM 0x0080 /* Sampling */
+#define SJW 0x0300 /* Synchronization Jump Width */
+
+/* CAN_DEBUG Masks */
+#define DEC 0x0001 /* Disable CAN Error Counters */
+#define DRI 0x0002 /* Disable CAN RX Input */
+#define DTO 0x0004 /* Disable CAN TX Output */
+#define DIL 0x0008 /* Disable CAN Internal Loop */
+#define MAA 0x0010 /* Mode Auto-Acknowledge Enable */
+#define MRB 0x0020 /* Mode Read Back Enable */
+#define CDE 0x8000 /* CAN Debug Enable */
+
+/* CAN_CEC Masks */
+#define RXECNT 0x00FF /* Receive Error Counter */
+#define TXECNT 0xFF00 /* Transmit Error Counter */
+
+/* CAN_INTR Masks */
+#define MBRIF 0x0001 /* Mailbox Receive Interrupt */
+#define MBTIF 0x0002 /* Mailbox Transmit Interrupt */
+#define GIRQ 0x0004 /* Global Interrupt */
+#define SMACK 0x0008 /* Sleep Mode Acknowledge */
+#define CANTX 0x0040 /* CAN TX Bus Value */
+#define CANRX 0x0080 /* CAN RX Bus Value */
+
+/* CAN_MBxx_ID1 and CAN_MBxx_ID0 Masks */
+#define DFC 0xFFFF /* Data Filtering Code (If Enabled) (ID0) */
+#define EXTID_LO 0xFFFF /* Lower 16 Bits of Extended Identifier (ID0) */
+#define EXTID_HI 0x0003 /* Upper 2 Bits of Extended Identifier (ID1) */
+#define BASEID 0x1FFC /* Base Identifier */
+#define IDE 0x2000 /* Identifier Extension */
+#define RTR 0x4000 /* Remote Frame Transmission Request */
+#define AME 0x8000 /* Acceptance Mask Enable */
+
+/* CAN_MBxx_TIMESTAMP Masks */
+#define TSV 0xFFFF /* Timestamp */
+
+/* CAN_MBxx_LENGTH Masks */
+#define DLC 0x000F /* Data Length Code */
+
+/* CAN_AMxxH and CAN_AMxxL Masks */
+#define DFM 0xFFFF /* Data Field Mask (If Enabled) (CAN_AMxxL) */
+#define EXTID_LO 0xFFFF /* Lower 16 Bits of Extended Identifier (CAN_AMxxL) */
+#define EXTID_HI 0x0003 /* Upper 2 Bits of Extended Identifier (CAN_AMxxH) */
+#define BASEID 0x1FFC /* Base Identifier */
+#define AMIDE 0x2000 /* Acceptance Mask ID Extension Enable */
+#define FMD 0x4000 /* Full Mask Data Field Enable */
+#define FDF 0x8000 /* Filter On Data Field Enable */
+
+/* CAN_MC1 Masks */
+#define MC0 0x0001 /* Enable Mailbox 0 */
+#define MC1 0x0002 /* Enable Mailbox 1 */
+#define MC2 0x0004 /* Enable Mailbox 2 */
+#define MC3 0x0008 /* Enable Mailbox 3 */
+#define MC4 0x0010 /* Enable Mailbox 4 */
+#define MC5 0x0020 /* Enable Mailbox 5 */
+#define MC6 0x0040 /* Enable Mailbox 6 */
+#define MC7 0x0080 /* Enable Mailbox 7 */
+#define MC8 0x0100 /* Enable Mailbox 8 */
+#define MC9 0x0200 /* Enable Mailbox 9 */
+#define MC10 0x0400 /* Enable Mailbox 10 */
+#define MC11 0x0800 /* Enable Mailbox 11 */
+#define MC12 0x1000 /* Enable Mailbox 12 */
+#define MC13 0x2000 /* Enable Mailbox 13 */
+#define MC14 0x4000 /* Enable Mailbox 14 */
+#define MC15 0x8000 /* Enable Mailbox 15 */
+
+/* CAN_MC2 Masks */
+#define MC16 0x0001 /* Enable Mailbox 16 */
+#define MC17 0x0002 /* Enable Mailbox 17 */
+#define MC18 0x0004 /* Enable Mailbox 18 */
+#define MC19 0x0008 /* Enable Mailbox 19 */
+#define MC20 0x0010 /* Enable Mailbox 20 */
+#define MC21 0x0020 /* Enable Mailbox 21 */
+#define MC22 0x0040 /* Enable Mailbox 22 */
+#define MC23 0x0080 /* Enable Mailbox 23 */
+#define MC24 0x0100 /* Enable Mailbox 24 */
+#define MC25 0x0200 /* Enable Mailbox 25 */
+#define MC26 0x0400 /* Enable Mailbox 26 */
+#define MC27 0x0800 /* Enable Mailbox 27 */
+#define MC28 0x1000 /* Enable Mailbox 28 */
+#define MC29 0x2000 /* Enable Mailbox 29 */
+#define MC30 0x4000 /* Enable Mailbox 30 */
+#define MC31 0x8000 /* Enable Mailbox 31 */
+
+/* CAN_MD1 Masks */
+#define MD0 0x0001 /* Enable Mailbox 0 For Receive */
+#define MD1 0x0002 /* Enable Mailbox 1 For Receive */
+#define MD2 0x0004 /* Enable Mailbox 2 For Receive */
+#define MD3 0x0008 /* Enable Mailbox 3 For Receive */
+#define MD4 0x0010 /* Enable Mailbox 4 For Receive */
+#define MD5 0x0020 /* Enable Mailbox 5 For Receive */
+#define MD6 0x0040 /* Enable Mailbox 6 For Receive */
+#define MD7 0x0080 /* Enable Mailbox 7 For Receive */
+#define MD8 0x0100 /* Enable Mailbox 8 For Receive */
+#define MD9 0x0200 /* Enable Mailbox 9 For Receive */
+#define MD10 0x0400 /* Enable Mailbox 10 For Receive */
+#define MD11 0x0800 /* Enable Mailbox 11 For Receive */
+#define MD12 0x1000 /* Enable Mailbox 12 For Receive */
+#define MD13 0x2000 /* Enable Mailbox 13 For Receive */
+#define MD14 0x4000 /* Enable Mailbox 14 For Receive */
+#define MD15 0x8000 /* Enable Mailbox 15 For Receive */
+
+/* CAN_MD2 Masks */
+#define MD16 0x0001 /* Enable Mailbox 16 For Receive */
+#define MD17 0x0002 /* Enable Mailbox 17 For Receive */
+#define MD18 0x0004 /* Enable Mailbox 18 For Receive */
+#define MD19 0x0008 /* Enable Mailbox 19 For Receive */
+#define MD20 0x0010 /* Enable Mailbox 20 For Receive */
+#define MD21 0x0020 /* Enable Mailbox 21 For Receive */
+#define MD22 0x0040 /* Enable Mailbox 22 For Receive */
+#define MD23 0x0080 /* Enable Mailbox 23 For Receive */
+#define MD24 0x0100 /* Enable Mailbox 24 For Receive */
+#define MD25 0x0200 /* Enable Mailbox 25 For Receive */
+#define MD26 0x0400 /* Enable Mailbox 26 For Receive */
+#define MD27 0x0800 /* Enable Mailbox 27 For Receive */
+#define MD28 0x1000 /* Enable Mailbox 28 For Receive */
+#define MD29 0x2000 /* Enable Mailbox 29 For Receive */
+#define MD30 0x4000 /* Enable Mailbox 30 For Receive */
+#define MD31 0x8000 /* Enable Mailbox 31 For Receive */
+
+/* CAN_RMP1 Masks */
+#define RMP0 0x0001 /* RX Message Pending In Mailbox 0 */
+#define RMP1 0x0002 /* RX Message Pending In Mailbox 1 */
+#define RMP2 0x0004 /* RX Message Pending In Mailbox 2 */
+#define RMP3 0x0008 /* RX Message Pending In Mailbox 3 */
+#define RMP4 0x0010 /* RX Message Pending In Mailbox 4 */
+#define RMP5 0x0020 /* RX Message Pending In Mailbox 5 */
+#define RMP6 0x0040 /* RX Message Pending In Mailbox 6 */
+#define RMP7 0x0080 /* RX Message Pending In Mailbox 7 */
+#define RMP8 0x0100 /* RX Message Pending In Mailbox 8 */
+#define RMP9 0x0200 /* RX Message Pending In Mailbox 9 */
+#define RMP10 0x0400 /* RX Message Pending In Mailbox 10 */
+#define RMP11 0x0800 /* RX Message Pending In Mailbox 11 */
+#define RMP12 0x1000 /* RX Message Pending In Mailbox 12 */
+#define RMP13 0x2000 /* RX Message Pending In Mailbox 13 */
+#define RMP14 0x4000 /* RX Message Pending In Mailbox 14 */
+#define RMP15 0x8000 /* RX Message Pending In Mailbox 15 */
+
+/* CAN_RMP2 Masks */
+#define RMP16 0x0001 /* RX Message Pending In Mailbox 16 */
+#define RMP17 0x0002 /* RX Message Pending In Mailbox 17 */
+#define RMP18 0x0004 /* RX Message Pending In Mailbox 18 */
+#define RMP19 0x0008 /* RX Message Pending In Mailbox 19 */
+#define RMP20 0x0010 /* RX Message Pending In Mailbox 20 */
+#define RMP21 0x0020 /* RX Message Pending In Mailbox 21 */
+#define RMP22 0x0040 /* RX Message Pending In Mailbox 22 */
+#define RMP23 0x0080 /* RX Message Pending In Mailbox 23 */
+#define RMP24 0x0100 /* RX Message Pending In Mailbox 24 */
+#define RMP25 0x0200 /* RX Message Pending In Mailbox 25 */
+#define RMP26 0x0400 /* RX Message Pending In Mailbox 26 */
+#define RMP27 0x0800 /* RX Message Pending In Mailbox 27 */
+#define RMP28 0x1000 /* RX Message Pending In Mailbox 28 */
+#define RMP29 0x2000 /* RX Message Pending In Mailbox 29 */
+#define RMP30 0x4000 /* RX Message Pending In Mailbox 30 */
+#define RMP31 0x8000 /* RX Message Pending In Mailbox 31 */
+
+/* CAN_RML1 Masks */
+#define RML0 0x0001 /* RX Message Lost In Mailbox 0 */
+#define RML1 0x0002 /* RX Message Lost In Mailbox 1 */
+#define RML2 0x0004 /* RX Message Lost In Mailbox 2 */
+#define RML3 0x0008 /* RX Message Lost In Mailbox 3 */
+#define RML4 0x0010 /* RX Message Lost In Mailbox 4 */
+#define RML5 0x0020 /* RX Message Lost In Mailbox 5 */
+#define RML6 0x0040 /* RX Message Lost In Mailbox 6 */
+#define RML7 0x0080 /* RX Message Lost In Mailbox 7 */
+#define RML8 0x0100 /* RX Message Lost In Mailbox 8 */
+#define RML9 0x0200 /* RX Message Lost In Mailbox 9 */
+#define RML10 0x0400 /* RX Message Lost In Mailbox 10 */
+#define RML11 0x0800 /* RX Message Lost In Mailbox 11 */
+#define RML12 0x1000 /* RX Message Lost In Mailbox 12 */
+#define RML13 0x2000 /* RX Message Lost In Mailbox 13 */
+#define RML14 0x4000 /* RX Message Lost In Mailbox 14 */
+#define RML15 0x8000 /* RX Message Lost In Mailbox 15 */
+
+/* CAN_RML2 Masks */
+#define RML16 0x0001 /* RX Message Lost In Mailbox 16 */
+#define RML17 0x0002 /* RX Message Lost In Mailbox 17 */
+#define RML18 0x0004 /* RX Message Lost In Mailbox 18 */
+#define RML19 0x0008 /* RX Message Lost In Mailbox 19 */
+#define RML20 0x0010 /* RX Message Lost In Mailbox 20 */
+#define RML21 0x0020 /* RX Message Lost In Mailbox 21 */
+#define RML22 0x0040 /* RX Message Lost In Mailbox 22 */
+#define RML23 0x0080 /* RX Message Lost In Mailbox 23 */
+#define RML24 0x0100 /* RX Message Lost In Mailbox 24 */
+#define RML25 0x0200 /* RX Message Lost In Mailbox 25 */
+#define RML26 0x0400 /* RX Message Lost In Mailbox 26 */
+#define RML27 0x0800 /* RX Message Lost In Mailbox 27 */
+#define RML28 0x1000 /* RX Message Lost In Mailbox 28 */
+#define RML29 0x2000 /* RX Message Lost In Mailbox 29 */
+#define RML30 0x4000 /* RX Message Lost In Mailbox 30 */
+#define RML31 0x8000 /* RX Message Lost In Mailbox 31 */
+
+/* CAN_OPSS1 Masks */
+#define OPSS0 0x0001 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 0 */
+#define OPSS1 0x0002 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 1 */
+#define OPSS2 0x0004 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 2 */
+#define OPSS3 0x0008 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 3 */
+#define OPSS4 0x0010 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 4 */
+#define OPSS5 0x0020 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 5 */
+#define OPSS6 0x0040 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 6 */
+#define OPSS7 0x0080 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 7 */
+#define OPSS8 0x0100 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 8 */
+#define OPSS9 0x0200 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 9 */
+#define OPSS10 0x0400 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 10 */
+#define OPSS11 0x0800 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 11 */
+#define OPSS12 0x1000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 12 */
+#define OPSS13 0x2000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 13 */
+#define OPSS14 0x4000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 14 */
+#define OPSS15 0x8000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 15 */
+
+/* CAN_OPSS2 Masks */
+#define OPSS16 0x0001 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 16 */
+#define OPSS17 0x0002 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 17 */
+#define OPSS18 0x0004 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 18 */
+#define OPSS19 0x0008 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 19 */
+#define OPSS20 0x0010 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 20 */
+#define OPSS21 0x0020 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 21 */
+#define OPSS22 0x0040 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 22 */
+#define OPSS23 0x0080 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 23 */
+#define OPSS24 0x0100 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 24 */
+#define OPSS25 0x0200 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 25 */
+#define OPSS26 0x0400 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 26 */
+#define OPSS27 0x0800 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 27 */
+#define OPSS28 0x1000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 28 */
+#define OPSS29 0x2000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 29 */
+#define OPSS30 0x4000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 30 */
+#define OPSS31 0x8000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 31 */
+
+/* CAN_TRR1 Masks */
+#define TRR0 0x0001 /* Deny But Don't Lock Access To Mailbox 0 */
+#define TRR1 0x0002 /* Deny But Don't Lock Access To Mailbox 1 */
+#define TRR2 0x0004 /* Deny But Don't Lock Access To Mailbox 2 */
+#define TRR3 0x0008 /* Deny But Don't Lock Access To Mailbox 3 */
+#define TRR4 0x0010 /* Deny But Don't Lock Access To Mailbox 4 */
+#define TRR5 0x0020 /* Deny But Don't Lock Access To Mailbox 5 */
+#define TRR6 0x0040 /* Deny But Don't Lock Access To Mailbox 6 */
+#define TRR7 0x0080 /* Deny But Don't Lock Access To Mailbox 7 */
+#define TRR8 0x0100 /* Deny But Don't Lock Access To Mailbox 8 */
+#define TRR9 0x0200 /* Deny But Don't Lock Access To Mailbox 9 */
+#define TRR10 0x0400 /* Deny But Don't Lock Access To Mailbox 10 */
+#define TRR11 0x0800 /* Deny But Don't Lock Access To Mailbox 11 */
+#define TRR12 0x1000 /* Deny But Don't Lock Access To Mailbox 12 */
+#define TRR13 0x2000 /* Deny But Don't Lock Access To Mailbox 13 */
+#define TRR14 0x4000 /* Deny But Don't Lock Access To Mailbox 14 */
+#define TRR15 0x8000 /* Deny But Don't Lock Access To Mailbox 15 */
+
+/* CAN_TRR2 Masks */
+#define TRR16 0x0001 /* Deny But Don't Lock Access To Mailbox 16 */
+#define TRR17 0x0002 /* Deny But Don't Lock Access To Mailbox 17 */
+#define TRR18 0x0004 /* Deny But Don't Lock Access To Mailbox 18 */
+#define TRR19 0x0008 /* Deny But Don't Lock Access To Mailbox 19 */
+#define TRR20 0x0010 /* Deny But Don't Lock Access To Mailbox 20 */
+#define TRR21 0x0020 /* Deny But Don't Lock Access To Mailbox 21 */
+#define TRR22 0x0040 /* Deny But Don't Lock Access To Mailbox 22 */
+#define TRR23 0x0080 /* Deny But Don't Lock Access To Mailbox 23 */
+#define TRR24 0x0100 /* Deny But Don't Lock Access To Mailbox 24 */
+#define TRR25 0x0200 /* Deny But Don't Lock Access To Mailbox 25 */
+#define TRR26 0x0400 /* Deny But Don't Lock Access To Mailbox 26 */
+#define TRR27 0x0800 /* Deny But Don't Lock Access To Mailbox 27 */
+#define TRR28 0x1000 /* Deny But Don't Lock Access To Mailbox 28 */
+#define TRR29 0x2000 /* Deny But Don't Lock Access To Mailbox 29 */
+#define TRR30 0x4000 /* Deny But Don't Lock Access To Mailbox 30 */
+#define TRR31 0x8000 /* Deny But Don't Lock Access To Mailbox 31 */
+
+/* CAN_TRS1 Masks */
+#define TRS0 0x0001 /* Remote Frame Request For Mailbox 0 */
+#define TRS1 0x0002 /* Remote Frame Request For Mailbox 1 */
+#define TRS2 0x0004 /* Remote Frame Request For Mailbox 2 */
+#define TRS3 0x0008 /* Remote Frame Request For Mailbox 3 */
+#define TRS4 0x0010 /* Remote Frame Request For Mailbox 4 */
+#define TRS5 0x0020 /* Remote Frame Request For Mailbox 5 */
+#define TRS6 0x0040 /* Remote Frame Request For Mailbox 6 */
+#define TRS7 0x0080 /* Remote Frame Request For Mailbox 7 */
+#define TRS8 0x0100 /* Remote Frame Request For Mailbox 8 */
+#define TRS9 0x0200 /* Remote Frame Request For Mailbox 9 */
+#define TRS10 0x0400 /* Remote Frame Request For Mailbox 10 */
+#define TRS11 0x0800 /* Remote Frame Request For Mailbox 11 */
+#define TRS12 0x1000 /* Remote Frame Request For Mailbox 12 */
+#define TRS13 0x2000 /* Remote Frame Request For Mailbox 13 */
+#define TRS14 0x4000 /* Remote Frame Request For Mailbox 14 */
+#define TRS15 0x8000 /* Remote Frame Request For Mailbox 15 */
+
+/* CAN_TRS2 Masks */
+#define TRS16 0x0001 /* Remote Frame Request For Mailbox 16 */
+#define TRS17 0x0002 /* Remote Frame Request For Mailbox 17 */
+#define TRS18 0x0004 /* Remote Frame Request For Mailbox 18 */
+#define TRS19 0x0008 /* Remote Frame Request For Mailbox 19 */
+#define TRS20 0x0010 /* Remote Frame Request For Mailbox 20 */
+#define TRS21 0x0020 /* Remote Frame Request For Mailbox 21 */
+#define TRS22 0x0040 /* Remote Frame Request For Mailbox 22 */
+#define TRS23 0x0080 /* Remote Frame Request For Mailbox 23 */
+#define TRS24 0x0100 /* Remote Frame Request For Mailbox 24 */
+#define TRS25 0x0200 /* Remote Frame Request For Mailbox 25 */
+#define TRS26 0x0400 /* Remote Frame Request For Mailbox 26 */
+#define TRS27 0x0800 /* Remote Frame Request For Mailbox 27 */
+#define TRS28 0x1000 /* Remote Frame Request For Mailbox 28 */
+#define TRS29 0x2000 /* Remote Frame Request For Mailbox 29 */
+#define TRS30 0x4000 /* Remote Frame Request For Mailbox 30 */
+#define TRS31 0x8000 /* Remote Frame Request For Mailbox 31 */
+
+/* CAN_AA1 Masks */
+#define AA0 0x0001 /* Aborted Message In Mailbox 0 */
+#define AA1 0x0002 /* Aborted Message In Mailbox 1 */
+#define AA2 0x0004 /* Aborted Message In Mailbox 2 */
+#define AA3 0x0008 /* Aborted Message In Mailbox 3 */
+#define AA4 0x0010 /* Aborted Message In Mailbox 4 */
+#define AA5 0x0020 /* Aborted Message In Mailbox 5 */
+#define AA6 0x0040 /* Aborted Message In Mailbox 6 */
+#define AA7 0x0080 /* Aborted Message In Mailbox 7 */
+#define AA8 0x0100 /* Aborted Message In Mailbox 8 */
+#define AA9 0x0200 /* Aborted Message In Mailbox 9 */
+#define AA10 0x0400 /* Aborted Message In Mailbox 10 */
+#define AA11 0x0800 /* Aborted Message In Mailbox 11 */
+#define AA12 0x1000 /* Aborted Message In Mailbox 12 */
+#define AA13 0x2000 /* Aborted Message In Mailbox 13 */
+#define AA14 0x4000 /* Aborted Message In Mailbox 14 */
+#define AA15 0x8000 /* Aborted Message In Mailbox 15 */
+
+/* CAN_AA2 Masks */
+#define AA16 0x0001 /* Aborted Message In Mailbox 16 */
+#define AA17 0x0002 /* Aborted Message In Mailbox 17 */
+#define AA18 0x0004 /* Aborted Message In Mailbox 18 */
+#define AA19 0x0008 /* Aborted Message In Mailbox 19 */
+#define AA20 0x0010 /* Aborted Message In Mailbox 20 */
+#define AA21 0x0020 /* Aborted Message In Mailbox 21 */
+#define AA22 0x0040 /* Aborted Message In Mailbox 22 */
+#define AA23 0x0080 /* Aborted Message In Mailbox 23 */
+#define AA24 0x0100 /* Aborted Message In Mailbox 24 */
+#define AA25 0x0200 /* Aborted Message In Mailbox 25 */
+#define AA26 0x0400 /* Aborted Message In Mailbox 26 */
+#define AA27 0x0800 /* Aborted Message In Mailbox 27 */
+#define AA28 0x1000 /* Aborted Message In Mailbox 28 */
+#define AA29 0x2000 /* Aborted Message In Mailbox 29 */
+#define AA30 0x4000 /* Aborted Message In Mailbox 30 */
+#define AA31 0x8000 /* Aborted Message In Mailbox 31 */
+
+/* CAN_TA1 Masks */
+#define TA0 0x0001 /* Transmit Successful From Mailbox 0 */
+#define TA1 0x0002 /* Transmit Successful From Mailbox 1 */
+#define TA2 0x0004 /* Transmit Successful From Mailbox 2 */
+#define TA3 0x0008 /* Transmit Successful From Mailbox 3 */
+#define TA4 0x0010 /* Transmit Successful From Mailbox 4 */
+#define TA5 0x0020 /* Transmit Successful From Mailbox 5 */
+#define TA6 0x0040 /* Transmit Successful From Mailbox 6 */
+#define TA7 0x0080 /* Transmit Successful From Mailbox 7 */
+#define TA8 0x0100 /* Transmit Successful From Mailbox 8 */
+#define TA9 0x0200 /* Transmit Successful From Mailbox 9 */
+#define TA10 0x0400 /* Transmit Successful From Mailbox 10 */
+#define TA11 0x0800 /* Transmit Successful From Mailbox 11 */
+#define TA12 0x1000 /* Transmit Successful From Mailbox 12 */
+#define TA13 0x2000 /* Transmit Successful From Mailbox 13 */
+#define TA14 0x4000 /* Transmit Successful From Mailbox 14 */
+#define TA15 0x8000 /* Transmit Successful From Mailbox 15 */
+
+/* CAN_TA2 Masks */
+#define TA16 0x0001 /* Transmit Successful From Mailbox 16 */
+#define TA17 0x0002 /* Transmit Successful From Mailbox 17 */
+#define TA18 0x0004 /* Transmit Successful From Mailbox 18 */
+#define TA19 0x0008 /* Transmit Successful From Mailbox 19 */
+#define TA20 0x0010 /* Transmit Successful From Mailbox 20 */
+#define TA21 0x0020 /* Transmit Successful From Mailbox 21 */
+#define TA22 0x0040 /* Transmit Successful From Mailbox 22 */
+#define TA23 0x0080 /* Transmit Successful From Mailbox 23 */
+#define TA24 0x0100 /* Transmit Successful From Mailbox 24 */
+#define TA25 0x0200 /* Transmit Successful From Mailbox 25 */
+#define TA26 0x0400 /* Transmit Successful From Mailbox 26 */
+#define TA27 0x0800 /* Transmit Successful From Mailbox 27 */
+#define TA28 0x1000 /* Transmit Successful From Mailbox 28 */
+#define TA29 0x2000 /* Transmit Successful From Mailbox 29 */
+#define TA30 0x4000 /* Transmit Successful From Mailbox 30 */
+#define TA31 0x8000 /* Transmit Successful From Mailbox 31 */
+
+/* CAN_MBTD Masks */
+#define TDPTR 0x001F /* Mailbox To Temporarily Disable */
+#define TDA 0x0040 /* Temporary Disable Acknowledge */
+#define TDR 0x0080 /* Temporary Disable Request */
+
+/* CAN_RFH1 Masks */
+#define RFH0 0x0001 /* Enable Automatic Remote Frame Handling For Mailbox 0 */
+#define RFH1 0x0002 /* Enable Automatic Remote Frame Handling For Mailbox 1 */
+#define RFH2 0x0004 /* Enable Automatic Remote Frame Handling For Mailbox 2 */
+#define RFH3 0x0008 /* Enable Automatic Remote Frame Handling For Mailbox 3 */
+#define RFH4 0x0010 /* Enable Automatic Remote Frame Handling For Mailbox 4 */
+#define RFH5 0x0020 /* Enable Automatic Remote Frame Handling For Mailbox 5 */
+#define RFH6 0x0040 /* Enable Automatic Remote Frame Handling For Mailbox 6 */
+#define RFH7 0x0080 /* Enable Automatic Remote Frame Handling For Mailbox 7 */
+#define RFH8 0x0100 /* Enable Automatic Remote Frame Handling For Mailbox 8 */
+#define RFH9 0x0200 /* Enable Automatic Remote Frame Handling For Mailbox 9 */
+#define RFH10 0x0400 /* Enable Automatic Remote Frame Handling For Mailbox 10 */
+#define RFH11 0x0800 /* Enable Automatic Remote Frame Handling For Mailbox 11 */
+#define RFH12 0x1000 /* Enable Automatic Remote Frame Handling For Mailbox 12 */
+#define RFH13 0x2000 /* Enable Automatic Remote Frame Handling For Mailbox 13 */
+#define RFH14 0x4000 /* Enable Automatic Remote Frame Handling For Mailbox 14 */
+#define RFH15 0x8000 /* Enable Automatic Remote Frame Handling For Mailbox 15 */
+
+/* CAN_RFH2 Masks */
+#define RFH16 0x0001 /* Enable Automatic Remote Frame Handling For Mailbox 16 */
+#define RFH17 0x0002 /* Enable Automatic Remote Frame Handling For Mailbox 17 */
+#define RFH18 0x0004 /* Enable Automatic Remote Frame Handling For Mailbox 18 */
+#define RFH19 0x0008 /* Enable Automatic Remote Frame Handling For Mailbox 19 */
+#define RFH20 0x0010 /* Enable Automatic Remote Frame Handling For Mailbox 20 */
+#define RFH21 0x0020 /* Enable Automatic Remote Frame Handling For Mailbox 21 */
+#define RFH22 0x0040 /* Enable Automatic Remote Frame Handling For Mailbox 22 */
+#define RFH23 0x0080 /* Enable Automatic Remote Frame Handling For Mailbox 23 */
+#define RFH24 0x0100 /* Enable Automatic Remote Frame Handling For Mailbox 24 */
+#define RFH25 0x0200 /* Enable Automatic Remote Frame Handling For Mailbox 25 */
+#define RFH26 0x0400 /* Enable Automatic Remote Frame Handling For Mailbox 26 */
+#define RFH27 0x0800 /* Enable Automatic Remote Frame Handling For Mailbox 27 */
+#define RFH28 0x1000 /* Enable Automatic Remote Frame Handling For Mailbox 28 */
+#define RFH29 0x2000 /* Enable Automatic Remote Frame Handling For Mailbox 29 */
+#define RFH30 0x4000 /* Enable Automatic Remote Frame Handling For Mailbox 30 */
+#define RFH31 0x8000 /* Enable Automatic Remote Frame Handling For Mailbox 31 */
+
+/* CAN_MBTIF1 Masks */
+#define MBTIF0 0x0001 /* TX Interrupt Active In Mailbox 0 */
+#define MBTIF1 0x0002 /* TX Interrupt Active In Mailbox 1 */
+#define MBTIF2 0x0004 /* TX Interrupt Active In Mailbox 2 */
+#define MBTIF3 0x0008 /* TX Interrupt Active In Mailbox 3 */
+#define MBTIF4 0x0010 /* TX Interrupt Active In Mailbox 4 */
+#define MBTIF5 0x0020 /* TX Interrupt Active In Mailbox 5 */
+#define MBTIF6 0x0040 /* TX Interrupt Active In Mailbox 6 */
+#define MBTIF7 0x0080 /* TX Interrupt Active In Mailbox 7 */
+#define MBTIF8 0x0100 /* TX Interrupt Active In Mailbox 8 */
+#define MBTIF9 0x0200 /* TX Interrupt Active In Mailbox 9 */
+#define MBTIF10 0x0400 /* TX Interrupt Active In Mailbox 10 */
+#define MBTIF11 0x0800 /* TX Interrupt Active In Mailbox 11 */
+#define MBTIF12 0x1000 /* TX Interrupt Active In Mailbox 12 */
+#define MBTIF13 0x2000 /* TX Interrupt Active In Mailbox 13 */
+#define MBTIF14 0x4000 /* TX Interrupt Active In Mailbox 14 */
+#define MBTIF15 0x8000 /* TX Interrupt Active In Mailbox 15 */
+
+/* CAN_MBTIF2 Masks */
+#define MBTIF16 0x0001 /* TX Interrupt Active In Mailbox 16 */
+#define MBTIF17 0x0002 /* TX Interrupt Active In Mailbox 17 */
+#define MBTIF18 0x0004 /* TX Interrupt Active In Mailbox 18 */
+#define MBTIF19 0x0008 /* TX Interrupt Active In Mailbox 19 */
+#define MBTIF20 0x0010 /* TX Interrupt Active In Mailbox 20 */
+#define MBTIF21 0x0020 /* TX Interrupt Active In Mailbox 21 */
+#define MBTIF22 0x0040 /* TX Interrupt Active In Mailbox 22 */
+#define MBTIF23 0x0080 /* TX Interrupt Active In Mailbox 23 */
+#define MBTIF24 0x0100 /* TX Interrupt Active In Mailbox 24 */
+#define MBTIF25 0x0200 /* TX Interrupt Active In Mailbox 25 */
+#define MBTIF26 0x0400 /* TX Interrupt Active In Mailbox 26 */
+#define MBTIF27 0x0800 /* TX Interrupt Active In Mailbox 27 */
+#define MBTIF28 0x1000 /* TX Interrupt Active In Mailbox 28 */
+#define MBTIF29 0x2000 /* TX Interrupt Active In Mailbox 29 */
+#define MBTIF30 0x4000 /* TX Interrupt Active In Mailbox 30 */
+#define MBTIF31 0x8000 /* TX Interrupt Active In Mailbox 31 */
+
+/* CAN_MBRIF1 Masks */
+#define MBRIF0 0x0001 /* RX Interrupt Active In Mailbox 0 */
+#define MBRIF1 0x0002 /* RX Interrupt Active In Mailbox 1 */
+#define MBRIF2 0x0004 /* RX Interrupt Active In Mailbox 2 */
+#define MBRIF3 0x0008 /* RX Interrupt Active In Mailbox 3 */
+#define MBRIF4 0x0010 /* RX Interrupt Active In Mailbox 4 */
+#define MBRIF5 0x0020 /* RX Interrupt Active In Mailbox 5 */
+#define MBRIF6 0x0040 /* RX Interrupt Active In Mailbox 6 */
+#define MBRIF7 0x0080 /* RX Interrupt Active In Mailbox 7 */
+#define MBRIF8 0x0100 /* RX Interrupt Active In Mailbox 8 */
+#define MBRIF9 0x0200 /* RX Interrupt Active In Mailbox 9 */
+#define MBRIF10 0x0400 /* RX Interrupt Active In Mailbox 10 */
+#define MBRIF11 0x0800 /* RX Interrupt Active In Mailbox 11 */
+#define MBRIF12 0x1000 /* RX Interrupt Active In Mailbox 12 */
+#define MBRIF13 0x2000 /* RX Interrupt Active In Mailbox 13 */
+#define MBRIF14 0x4000 /* RX Interrupt Active In Mailbox 14 */
+#define MBRIF15 0x8000 /* RX Interrupt Active In Mailbox 15 */
+
+/* CAN_MBRIF2 Masks */
+#define MBRIF16 0x0001 /* RX Interrupt Active In Mailbox 16 */
+#define MBRIF17 0x0002 /* RX Interrupt Active In Mailbox 17 */
+#define MBRIF18 0x0004 /* RX Interrupt Active In Mailbox 18 */
+#define MBRIF19 0x0008 /* RX Interrupt Active In Mailbox 19 */
+#define MBRIF20 0x0010 /* RX Interrupt Active In Mailbox 20 */
+#define MBRIF21 0x0020 /* RX Interrupt Active In Mailbox 21 */
+#define MBRIF22 0x0040 /* RX Interrupt Active In Mailbox 22 */
+#define MBRIF23 0x0080 /* RX Interrupt Active In Mailbox 23 */
+#define MBRIF24 0x0100 /* RX Interrupt Active In Mailbox 24 */
+#define MBRIF25 0x0200 /* RX Interrupt Active In Mailbox 25 */
+#define MBRIF26 0x0400 /* RX Interrupt Active In Mailbox 26 */
+#define MBRIF27 0x0800 /* RX Interrupt Active In Mailbox 27 */
+#define MBRIF28 0x1000 /* RX Interrupt Active In Mailbox 28 */
+#define MBRIF29 0x2000 /* RX Interrupt Active In Mailbox 29 */
+#define MBRIF30 0x4000 /* RX Interrupt Active In Mailbox 30 */
+#define MBRIF31 0x8000 /* RX Interrupt Active In Mailbox 31 */
+
+/* CAN_MBIM1 Masks */
+#define MBIM0 0x0001 /* Enable Interrupt For Mailbox 0 */
+#define MBIM1 0x0002 /* Enable Interrupt For Mailbox 1 */
+#define MBIM2 0x0004 /* Enable Interrupt For Mailbox 2 */
+#define MBIM3 0x0008 /* Enable Interrupt For Mailbox 3 */
+#define MBIM4 0x0010 /* Enable Interrupt For Mailbox 4 */
+#define MBIM5 0x0020 /* Enable Interrupt For Mailbox 5 */
+#define MBIM6 0x0040 /* Enable Interrupt For Mailbox 6 */
+#define MBIM7 0x0080 /* Enable Interrupt For Mailbox 7 */
+#define MBIM8 0x0100 /* Enable Interrupt For Mailbox 8 */
+#define MBIM9 0x0200 /* Enable Interrupt For Mailbox 9 */
+#define MBIM10 0x0400 /* Enable Interrupt For Mailbox 10 */
+#define MBIM11 0x0800 /* Enable Interrupt For Mailbox 11 */
+#define MBIM12 0x1000 /* Enable Interrupt For Mailbox 12 */
+#define MBIM13 0x2000 /* Enable Interrupt For Mailbox 13 */
+#define MBIM14 0x4000 /* Enable Interrupt For Mailbox 14 */
+#define MBIM15 0x8000 /* Enable Interrupt For Mailbox 15 */
+
+/* CAN_MBIM2 Masks */
+#define MBIM16 0x0001 /* Enable Interrupt For Mailbox 16 */
+#define MBIM17 0x0002 /* Enable Interrupt For Mailbox 17 */
+#define MBIM18 0x0004 /* Enable Interrupt For Mailbox 18 */
+#define MBIM19 0x0008 /* Enable Interrupt For Mailbox 19 */
+#define MBIM20 0x0010 /* Enable Interrupt For Mailbox 20 */
+#define MBIM21 0x0020 /* Enable Interrupt For Mailbox 21 */
+#define MBIM22 0x0040 /* Enable Interrupt For Mailbox 22 */
+#define MBIM23 0x0080 /* Enable Interrupt For Mailbox 23 */
+#define MBIM24 0x0100 /* Enable Interrupt For Mailbox 24 */
+#define MBIM25 0x0200 /* Enable Interrupt For Mailbox 25 */
+#define MBIM26 0x0400 /* Enable Interrupt For Mailbox 26 */
+#define MBIM27 0x0800 /* Enable Interrupt For Mailbox 27 */
+#define MBIM28 0x1000 /* Enable Interrupt For Mailbox 28 */
+#define MBIM29 0x2000 /* Enable Interrupt For Mailbox 29 */
+#define MBIM30 0x4000 /* Enable Interrupt For Mailbox 30 */
+#define MBIM31 0x8000 /* Enable Interrupt For Mailbox 31 */
+
+/* CAN_GIM Masks */
+#define EWTIM 0x0001 /* Enable TX Error Count Interrupt */
+#define EWRIM 0x0002 /* Enable RX Error Count Interrupt */
+#define EPIM 0x0004 /* Enable Error-Passive Mode Interrupt */
+#define BOIM 0x0008 /* Enable Bus Off Interrupt */
+#define WUIM 0x0010 /* Enable Wake-Up Interrupt */
+#define UIAIM 0x0020 /* Enable Access To Unimplemented Address Interrupt */
+#define AAIM 0x0040 /* Enable Abort Acknowledge Interrupt */
+#define RMLIM 0x0080 /* Enable RX Message Lost Interrupt */
+#define UCEIM 0x0100 /* Enable Universal Counter Overflow Interrupt */
+#define EXTIM 0x0200 /* Enable External Trigger Output Interrupt */
+#define ADIM 0x0400 /* Enable Access Denied Interrupt */
+
+/* CAN_GIS Masks */
+#define EWTIS 0x0001 /* TX Error Count IRQ Status */
+#define EWRIS 0x0002 /* RX Error Count IRQ Status */
+#define EPIS 0x0004 /* Error-Passive Mode IRQ Status */
+#define BOIS 0x0008 /* Bus Off IRQ Status */
+#define WUIS 0x0010 /* Wake-Up IRQ Status */
+#define UIAIS 0x0020 /* Access To Unimplemented Address IRQ Status */
+#define AAIS 0x0040 /* Abort Acknowledge IRQ Status */
+#define RMLIS 0x0080 /* RX Message Lost IRQ Status */
+#define UCEIS 0x0100 /* Universal Counter Overflow IRQ Status */
+#define EXTIS 0x0200 /* External Trigger Output IRQ Status */
+#define ADIS 0x0400 /* Access Denied IRQ Status */
+
+/* CAN_GIF Masks */
+#define EWTIF 0x0001 /* TX Error Count IRQ Flag */
+#define EWRIF 0x0002 /* RX Error Count IRQ Flag */
+#define EPIF 0x0004 /* Error-Passive Mode IRQ Flag */
+#define BOIF 0x0008 /* Bus Off IRQ Flag */
+#define WUIF 0x0010 /* Wake-Up IRQ Flag */
+#define UIAIF 0x0020 /* Access To Unimplemented Address IRQ Flag */
+#define AAIF 0x0040 /* Abort Acknowledge IRQ Flag */
+#define RMLIF 0x0080 /* RX Message Lost IRQ Flag */
+#define UCEIF 0x0100 /* Universal Counter Overflow IRQ Flag */
+#define EXTIF 0x0200 /* External Trigger Output IRQ Flag */
+#define ADIF 0x0400 /* Access Denied IRQ Flag */
+
+/* CAN_UCCNF Masks */
+#define UCCNF 0x000F /* Universal Counter Mode */
+#define UC_STAMP 0x0001 /* Timestamp Mode */
+#define UC_WDOG 0x0002 /* Watchdog Mode */
+#define UC_AUTOTX 0x0003 /* Auto-Transmit Mode */
+#define UC_ERROR 0x0006 /* CAN Error Frame Count */
+#define UC_OVER 0x0007 /* CAN Overload Frame Count */
+#define UC_LOST 0x0008 /* Arbitration Lost During TX Count */
+#define UC_AA 0x0009 /* TX Abort Count */
+#define UC_TA 0x000A /* TX Successful Count */
+#define UC_REJECT 0x000B /* RX Message Rejected Count */
+#define UC_RML 0x000C /* RX Message Lost Count */
+#define UC_RX 0x000D /* Total Successful RX Messages Count */
+#define UC_RMP 0x000E /* Successful RX W/Matching ID Count */
+#define UC_ALL 0x000F /* Correct Message On CAN Bus Line Count */
+#define UCRC 0x0020 /* Universal Counter Reload/Clear */
+#define UCCT 0x0040 /* Universal Counter CAN Trigger */
+#define UCE 0x0080 /* Universal Counter Enable */
+
+/* CAN_ESR Masks */
+#define ACKE 0x0004 /* Acknowledge Error */
+#define SER 0x0008 /* Stuff Error */
+#define CRCE 0x0010 /* CRC Error */
+#define SA0 0x0020 /* Stuck At Dominant Error */
+#define BEF 0x0040 /* Bit Error Flag */
+#define FER 0x0080 /* Form Error Flag */
+
+/* CAN_EWR Masks */
+#define EWLREC 0x00FF /* RX Error Count Limit (For EWRIS) */
+#define EWLTEC 0xFF00 /* TX Error Count Limit (For EWTIS) */
+
+/* ******************* PIN CONTROL REGISTER MASKS ************************/
+/* PORT_MUX Masks */
+#define PJSE 0x0001 /* Port J SPI/SPORT Enable */
+#define PJSE_SPORT 0x0000 /* Enable TFS0/DT0PRI */
+#define PJSE_SPI 0x0001 /* Enable SPI_SSEL3:2 */
+
+#define PJCE(x) (((x)&0x3)<<1) /* Port J CAN/SPI/SPORT Enable */
+#define PJCE_SPORT 0x0000 /* Enable DR0SEC/DT0SEC */
+#define PJCE_CAN 0x0002 /* Enable CAN RX/TX */
+#define PJCE_SPI 0x0004 /* Enable SPI_SSEL7 */
+
+#define PFDE 0x0008 /* Port F DMA Request Enable */
+#define PGDE_UART 0x0000 /* Enable UART0 RX/TX */
+#define PGDE_DMA 0x0008 /* Enable DMAR1:0 */
+
+#define PFTE 0x0010 /* Port F Timer Enable */
+#define PFTE_UART 0x0000 /* Enable UART1 RX/TX */
+#define PFTE_TIMER 0x0010 /* Enable TMR7:6 */
+
+#define PFS6E 0x0020 /* Port F SPI SSEL 6 Enable */
+#define PFS6E_TIMER 0x0000 /* Enable TMR5 */
+#define PFS6E_SPI 0x0020 /* Enable SPI_SSEL6 */
+
+#define PFS5E 0x0040 /* Port F SPI SSEL 5 Enable */
+#define PFS5E_TIMER 0x0000 /* Enable TMR4 */
+#define PFS5E_SPI 0x0040 /* Enable SPI_SSEL5 */
+
+#define PFS4E 0x0080 /* Port F SPI SSEL 4 Enable */
+#define PFS4E_TIMER 0x0000 /* Enable TMR3 */
+#define PFS4E_SPI 0x0080 /* Enable SPI_SSEL4 */
+
+#define PFFE 0x0100 /* Port F PPI Frame Sync Enable */
+#define PFFE_TIMER 0x0000 /* Enable TMR2 */
+#define PFFE_PPI 0x0100 /* Enable PPI FS3 */
+
+#define PGSE 0x0200 /* Port G SPORT1 Secondary Enable */
+#define PGSE_PPI 0x0000 /* Enable PPI D9:8 */
+#define PGSE_SPORT 0x0200 /* Enable DR1SEC/DT1SEC */
+
+#define PGRE 0x0400 /* Port G SPORT1 Receive Enable */
+#define PGRE_PPI 0x0000 /* Enable PPI D12:10 */
+#define PGRE_SPORT 0x0400 /* Enable DR1PRI/RFS1/RSCLK1 */
+
+#define PGTE 0x0800 /* Port G SPORT1 Transmit Enable */
+#define PGTE_PPI 0x0000 /* Enable PPI D15:13 */
+#define PGTE_SPORT 0x0800 /* Enable DT1PRI/TFS1/TSCLK1 */
+
+/* ****************** HANDSHAKE DMA (HDMA) MASKS *********************/
+/* HDMAx_CTL Masks */
+#define HMDMAEN 0x0001 /* Enable Handshake DMA 0/1 */
+#define REP 0x0002 /* HDMA Request Polarity */
+#define UTE 0x0004 /* Urgency Threshold Enable */
+#define OIE 0x0010 /* Overflow Interrupt Enable */
+#define BDIE 0x0020 /* Block Done Interrupt Enable */
+#define MBDI 0x0040 /* Mask Block Done IRQ If Pending ECNT */
+#define DRQ 0x0300 /* HDMA Request Type */
+#define DRQ_NONE 0x0000 /* No Request */
+#define DRQ_SINGLE 0x0100 /* Channels Request Single */
+#define DRQ_MULTI 0x0200 /* Channels Request Multi (Default) */
+#define DRQ_URGENT 0x0300 /* Channels Request Multi Urgent */
+#define RBC 0x1000 /* Reload BCNT With IBCNT */
+#define PS 0x2000 /* HDMA Pin Status */
+#define OI 0x4000 /* Overflow Interrupt Generated */
+#define BDI 0x8000 /* Block Done Interrupt Generated */
+
+#endif /* _DEF_BF534_H */
diff --git a/include/asm-blackfin/mach-bf537/defBF537.h b/include/asm-blackfin/mach-bf537/defBF537.h
new file mode 100644
index 0000000..26f9c02
--- /dev/null
+++ b/include/asm-blackfin/mach-bf537/defBF537.h
@@ -0,0 +1,404 @@
+/*
+ * file: include/asm-blackfin/mach-bf537/defbf537.h
+ * based on:
+ * author:
+ *
+ * created:
+ * description:
+ * system mmr register map
+ * rev:
+ *
+ * modified:
+ *
+ *
+ * bugs: enter bugs at http://blackfin.uclinux.org/
+ *
+ * this program is free software; you can redistribute it and/or modify
+ * it under the terms of the gnu general public license as published by
+ * the free software foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * this program is distributed in the hope that it will be useful,
+ * but without any warranty; without even the implied warranty of
+ * merchantability or fitness for a particular purpose. see the
+ * gnu general public license for more details.
+ *
+ * you should have received a copy of the gnu general public license
+ * along with this program; see the file copying.
+ * if not, write to the free software foundation,
+ * 59 temple place - suite 330, boston, ma 02111-1307, usa.
+ */
+
+#ifndef _DEF_BF537_H
+#define _DEF_BF537_H
+
+/*include all Core registers and bit definitions*/
+#include "defBF537.h"
+
+/*include core specific register pointer definitions*/
+#include <asm/mach-common/cdef_LPBlackfin.h>
+
+/************************************************************************************
+** Define EMAC Section Unique to BF536/BF537
+*************************************************************************************/
+
+/* 10/100 Ethernet Controller (0xFFC03000 - 0xFFC031FF) */
+#define EMAC_OPMODE 0xFFC03000 /* Operating Mode Register */
+#define EMAC_ADDRLO 0xFFC03004 /* Address Low (32 LSBs) Register */
+#define EMAC_ADDRHI 0xFFC03008 /* Address High (16 MSBs) Register */
+#define EMAC_HASHLO 0xFFC0300C /* Multicast Hash Table Low (Bins 31-0) Register */
+#define EMAC_HASHHI 0xFFC03010 /* Multicast Hash Table High (Bins 63-32) Register */
+#define EMAC_STAADD 0xFFC03014 /* Station Management Address Register */
+#define EMAC_STADAT 0xFFC03018 /* Station Management Data Register */
+#define EMAC_FLC 0xFFC0301C /* Flow Control Register */
+#define EMAC_VLAN1 0xFFC03020 /* VLAN1 Tag Register */
+#define EMAC_VLAN2 0xFFC03024 /* VLAN2 Tag Register */
+#define EMAC_WKUP_CTL 0xFFC0302C /* Wake-Up Control/Status Register */
+#define EMAC_WKUP_FFMSK0 0xFFC03030 /* Wake-Up Frame Filter 0 Byte Mask Register */
+#define EMAC_WKUP_FFMSK1 0xFFC03034 /* Wake-Up Frame Filter 1 Byte Mask Register */
+#define EMAC_WKUP_FFMSK2 0xFFC03038 /* Wake-Up Frame Filter 2 Byte Mask Register */
+#define EMAC_WKUP_FFMSK3 0xFFC0303C /* Wake-Up Frame Filter 3 Byte Mask Register */
+#define EMAC_WKUP_FFCMD 0xFFC03040 /* Wake-Up Frame Filter Commands Register */
+#define EMAC_WKUP_FFOFF 0xFFC03044 /* Wake-Up Frame Filter Offsets Register */
+#define EMAC_WKUP_FFCRC0 0xFFC03048 /* Wake-Up Frame Filter 0,1 CRC-16 Register */
+#define EMAC_WKUP_FFCRC1 0xFFC0304C /* Wake-Up Frame Filter 2,3 CRC-16 Register */
+
+#define EMAC_SYSCTL 0xFFC03060 /* EMAC System Control Register */
+#define EMAC_SYSTAT 0xFFC03064 /* EMAC System Status Register */
+#define EMAC_RX_STAT 0xFFC03068 /* RX Current Frame Status Register */
+#define EMAC_RX_STKY 0xFFC0306C /* RX Sticky Frame Status Register */
+#define EMAC_RX_IRQE 0xFFC03070 /* RX Frame Status Interrupt Enables Register */
+#define EMAC_TX_STAT 0xFFC03074 /* TX Current Frame Status Register */
+#define EMAC_TX_STKY 0xFFC03078 /* TX Sticky Frame Status Register */
+#define EMAC_TX_IRQE 0xFFC0307C /* TX Frame Status Interrupt Enables Register */
+
+#define EMAC_MMC_CTL 0xFFC03080 /* MMC Counter Control Register */
+#define EMAC_MMC_RIRQS 0xFFC03084 /* MMC RX Interrupt Status Register */
+#define EMAC_MMC_RIRQE 0xFFC03088 /* MMC RX Interrupt Enables Register */
+#define EMAC_MMC_TIRQS 0xFFC0308C /* MMC TX Interrupt Status Register */
+#define EMAC_MMC_TIRQE 0xFFC03090 /* MMC TX Interrupt Enables Register */
+
+#define EMAC_RXC_OK 0xFFC03100 /* RX Frame Successful Count */
+#define EMAC_RXC_FCS 0xFFC03104 /* RX Frame FCS Failure Count */
+#define EMAC_RXC_ALIGN 0xFFC03108 /* RX Alignment Error Count */
+#define EMAC_RXC_OCTET 0xFFC0310C /* RX Octets Successfully Received Count */
+#define EMAC_RXC_DMAOVF 0xFFC03110 /* Internal MAC Sublayer Error RX Frame Count */
+#define EMAC_RXC_UNICST 0xFFC03114 /* Unicast RX Frame Count */
+#define EMAC_RXC_MULTI 0xFFC03118 /* Multicast RX Frame Count */
+#define EMAC_RXC_BROAD 0xFFC0311C /* Broadcast RX Frame Count */
+#define EMAC_RXC_LNERRI 0xFFC03120 /* RX Frame In Range Error Count */
+#define EMAC_RXC_LNERRO 0xFFC03124 /* RX Frame Out Of Range Error Count */
+#define EMAC_RXC_LONG 0xFFC03128 /* RX Frame Too Long Count */
+#define EMAC_RXC_MACCTL 0xFFC0312C /* MAC Control RX Frame Count */
+#define EMAC_RXC_OPCODE 0xFFC03130 /* Unsupported Op-Code RX Frame Count */
+#define EMAC_RXC_PAUSE 0xFFC03134 /* MAC Control Pause RX Frame Count */
+#define EMAC_RXC_ALLFRM 0xFFC03138 /* Overall RX Frame Count */
+#define EMAC_RXC_ALLOCT 0xFFC0313C /* Overall RX Octet Count */
+#define EMAC_RXC_TYPED 0xFFC03140 /* Type/Length Consistent RX Frame Count */
+#define EMAC_RXC_SHORT 0xFFC03144 /* RX Frame Fragment Count - Byte Count x < 64 */
+#define EMAC_RXC_EQ64 0xFFC03148 /* Good RX Frame Count - Byte Count x = 64 */
+#define EMAC_RXC_LT128 0xFFC0314C /* Good RX Frame Count - Byte Count 64 <= x < 128 */
+#define EMAC_RXC_LT256 0xFFC03150 /* Good RX Frame Count - Byte Count 128 <= x < 256 */
+#define EMAC_RXC_LT512 0xFFC03154 /* Good RX Frame Count - Byte Count 256 <= x < 512 */
+#define EMAC_RXC_LT1024 0xFFC03158 /* Good RX Frame Count - Byte Count 512 <= x < 1024 */
+#define EMAC_RXC_GE1024 0xFFC0315C /* Good RX Frame Count - Byte Count x >= 1024 */
+
+#define EMAC_TXC_OK 0xFFC03180 /* TX Frame Successful Count */
+#define EMAC_TXC_1COL 0xFFC03184 /* TX Frames Successful After Single Collision Count */
+#define EMAC_TXC_GT1COL 0xFFC03188 /* TX Frames Successful After Multiple Collisions Count */
+#define EMAC_TXC_OCTET 0xFFC0318C /* TX Octets Successfully Received Count */
+#define EMAC_TXC_DEFER 0xFFC03190 /* TX Frame Delayed Due To Busy Count */
+#define EMAC_TXC_LATECL 0xFFC03194 /* Late TX Collisions Count */
+#define EMAC_TXC_XS_COL 0xFFC03198 /* TX Frame Failed Due To Excessive Collisions Count */
+#define EMAC_TXC_DMAUND 0xFFC0319C /* Internal MAC Sublayer Error TX Frame Count */
+#define EMAC_TXC_CRSERR 0xFFC031A0 /* Carrier Sense Deasserted During TX Frame Count */
+#define EMAC_TXC_UNICST 0xFFC031A4 /* Unicast TX Frame Count */
+#define EMAC_TXC_MULTI 0xFFC031A8 /* Multicast TX Frame Count */
+#define EMAC_TXC_BROAD 0xFFC031AC /* Broadcast TX Frame Count */
+#define EMAC_TXC_XS_DFR 0xFFC031B0 /* TX Frames With Excessive Deferral Count */
+#define EMAC_TXC_MACCTL 0xFFC031B4 /* MAC Control TX Frame Count */
+#define EMAC_TXC_ALLFRM 0xFFC031B8 /* Overall TX Frame Count */
+#define EMAC_TXC_ALLOCT 0xFFC031BC /* Overall TX Octet Count */
+#define EMAC_TXC_EQ64 0xFFC031C0 /* Good TX Frame Count - Byte Count x = 64 */
+#define EMAC_TXC_LT128 0xFFC031C4 /* Good TX Frame Count - Byte Count 64 <= x < 128 */
+#define EMAC_TXC_LT256 0xFFC031C8 /* Good TX Frame Count - Byte Count 128 <= x < 256 */
+#define EMAC_TXC_LT512 0xFFC031CC /* Good TX Frame Count - Byte Count 256 <= x < 512 */
+#define EMAC_TXC_LT1024 0xFFC031D0 /* Good TX Frame Count - Byte Count 512 <= x < 1024 */
+#define EMAC_TXC_GE1024 0xFFC031D4 /* Good TX Frame Count - Byte Count x >= 1024 */
+#define EMAC_TXC_ABORT 0xFFC031D8 /* Total TX Frames Aborted Count */
+
+/* Listing for IEEE-Supported Count Registers */
+#define FramesReceivedOK EMAC_RXC_OK /* RX Frame Successful Count */
+#define FrameCheckSequenceErrors EMAC_RXC_FCS /* RX Frame FCS Failure Count */
+#define AlignmentErrors EMAC_RXC_ALIGN /* RX Alignment Error Count */
+#define OctetsReceivedOK EMAC_RXC_OCTET /* RX Octets Successfully Received Count */
+#define FramesLostDueToIntMACRcvError EMAC_RXC_DMAOVF /* Internal MAC Sublayer Error RX Frame Count */
+#define UnicastFramesReceivedOK EMAC_RXC_UNICST /* Unicast RX Frame Count */
+#define MulticastFramesReceivedOK EMAC_RXC_MULTI /* Multicast RX Frame Count */
+#define BroadcastFramesReceivedOK EMAC_RXC_BROAD /* Broadcast RX Frame Count */
+#define InRangeLengthErrors EMAC_RXC_LNERRI /* RX Frame In Range Error Count */
+#define OutOfRangeLengthField EMAC_RXC_LNERRO /* RX Frame Out Of Range Error Count */
+#define FrameTooLongErrors EMAC_RXC_LONG /* RX Frame Too Long Count */
+#define MACControlFramesReceived EMAC_RXC_MACCTL /* MAC Control RX Frame Count */
+#define UnsupportedOpcodesReceived EMAC_RXC_OPCODE /* Unsupported Op-Code RX Frame Count */
+#define PAUSEMACCtrlFramesReceived EMAC_RXC_PAUSE /* MAC Control Pause RX Frame Count */
+#define FramesReceivedAll EMAC_RXC_ALLFRM /* Overall RX Frame Count */
+#define OctetsReceivedAll EMAC_RXC_ALLOCT /* Overall RX Octet Count */
+#define TypedFramesReceived EMAC_RXC_TYPED /* Type/Length Consistent RX Frame Count */
+#define FramesLenLt64Received EMAC_RXC_SHORT /* RX Frame Fragment Count - Byte Count x < 64 */
+#define FramesLenEq64Received EMAC_RXC_EQ64 /* Good RX Frame Count - Byte Count x = 64 */
+#define FramesLen65_127Received EMAC_RXC_LT128 /* Good RX Frame Count - Byte Count 64 <= x < 128 */
+#define FramesLen128_255Received EMAC_RXC_LT256 /* Good RX Frame Count - Byte Count 128 <= x < 256 */
+#define FramesLen256_511Received EMAC_RXC_LT512 /* Good RX Frame Count - Byte Count 256 <= x < 512 */
+#define FramesLen512_1023Received EMAC_RXC_LT1024 /* Good RX Frame Count - Byte Count 512 <= x < 1024 */
+#define FramesLen1024_MaxReceived EMAC_RXC_GE1024 /* Good RX Frame Count - Byte Count x >= 1024 */
+
+#define FramesTransmittedOK EMAC_TXC_OK /* TX Frame Successful Count */
+#define SingleCollisionFrames EMAC_TXC_1COL /* TX Frames Successful After Single Collision Count */
+#define MultipleCollisionFrames EMAC_TXC_GT1COL /* TX Frames Successful After Multiple Collisions Count */
+#define OctetsTransmittedOK EMAC_TXC_OCTET /* TX Octets Successfully Received Count */
+#define FramesWithDeferredXmissions EMAC_TXC_DEFER /* TX Frame Delayed Due To Busy Count */
+#define LateCollisions EMAC_TXC_LATECL /* Late TX Collisions Count */
+#define FramesAbortedDueToXSColls EMAC_TXC_XS_COL /* TX Frame Failed Due To Excessive Collisions Count */
+#define FramesLostDueToIntMacXmitError EMAC_TXC_DMAUND /* Internal MAC Sublayer Error TX Frame Count */
+#define CarrierSenseErrors EMAC_TXC_CRSERR /* Carrier Sense Deasserted During TX Frame Count */
+#define UnicastFramesXmittedOK EMAC_TXC_UNICST /* Unicast TX Frame Count */
+#define MulticastFramesXmittedOK EMAC_TXC_MULTI /* Multicast TX Frame Count */
+#define BroadcastFramesXmittedOK EMAC_TXC_BROAD /* Broadcast TX Frame Count */
+#define FramesWithExcessiveDeferral EMAC_TXC_XS_DFR /* TX Frames With Excessive Deferral Count */
+#define MACControlFramesTransmitted EMAC_TXC_MACCTL /* MAC Control TX Frame Count */
+#define FramesTransmittedAll EMAC_TXC_ALLFRM /* Overall TX Frame Count */
+#define OctetsTransmittedAll EMAC_TXC_ALLOCT /* Overall TX Octet Count */
+#define FramesLenEq64Transmitted EMAC_TXC_EQ64 /* Good TX Frame Count - Byte Count x = 64 */
+#define FramesLen65_127Transmitted EMAC_TXC_LT128 /* Good TX Frame Count - Byte Count 64 <= x < 128 */
+#define FramesLen128_255Transmitted EMAC_TXC_LT256 /* Good TX Frame Count - Byte Count 128 <= x < 256 */
+#define FramesLen256_511Transmitted EMAC_TXC_LT512 /* Good TX Frame Count - Byte Count 256 <= x < 512 */
+#define FramesLen512_1023Transmitted EMAC_TXC_LT1024 /* Good TX Frame Count - Byte Count 512 <= x < 1024 */
+#define FramesLen1024_MaxTransmitted EMAC_TXC_GE1024 /* Good TX Frame Count - Byte Count x >= 1024 */
+#define TxAbortedFrames EMAC_TXC_ABORT /* Total TX Frames Aborted Count */
+
+/***********************************************************************************
+** System MMR Register Bits And Macros
+**
+** Disclaimer: All macros are intended to make C and Assembly code more readable.
+** Use these macros carefully, as any that do left shifts for field
+** depositing will result in the lower order bits being destroyed. Any
+** macro that shifts left to properly position the bit-field should be
+** used as part of an OR to initialize a register and NOT as a dynamic
+** modifier UNLESS the lower order bits are saved and ORed back in when
+** the macro is used.
+*************************************************************************************/
+/************************ ETHERNET 10/100 CONTROLLER MASKS ************************/
+/* EMAC_OPMODE Masks */
+#define RE 0x00000001 /* Receiver Enable */
+#define ASTP 0x00000002 /* Enable Automatic Pad Stripping On RX Frames */
+#define HU 0x00000010 /* Hash Filter Unicast Address */
+#define HM 0x00000020 /* Hash Filter Multicast Address */
+#define PAM 0x00000040 /* Pass-All-Multicast Mode Enable */
+#define PR 0x00000080 /* Promiscuous Mode Enable */
+#define IFE 0x00000100 /* Inverse Filtering Enable */
+#define DBF 0x00000200 /* Disable Broadcast Frame Reception */
+#define PBF 0x00000400 /* Pass Bad Frames Enable */
+#define PSF 0x00000800 /* Pass Short Frames Enable */
+#define RAF 0x00001000 /* Receive-All Mode */
+#define TE 0x00010000 /* Transmitter Enable */
+#define DTXPAD 0x00020000 /* Disable Automatic TX Padding */
+#define DTXCRC 0x00040000 /* Disable Automatic TX CRC Generation */
+#define DC 0x00080000 /* Deferral Check */
+#define BOLMT 0x00300000 /* Back-Off Limit */
+#define BOLMT_10 0x00000000 /* 10-bit range */
+#define BOLMT_8 0x00100000 /* 8-bit range */
+#define BOLMT_4 0x00200000 /* 4-bit range */
+#define BOLMT_1 0x00300000 /* 1-bit range */
+#define DRTY 0x00400000 /* Disable TX Retry On Collision */
+#define LCTRE 0x00800000 /* Enable TX Retry On Late Collision */
+#define RMII 0x01000000 /* RMII/MII* Mode */
+#define RMII_10 0x02000000 /* Speed Select for RMII Port (10MBit/100MBit*) */
+#define FDMODE 0x04000000 /* Duplex Mode Enable (Full/Half*) */
+#define LB 0x08000000 /* Internal Loopback Enable */
+#define DRO 0x10000000 /* Disable Receive Own Frames (Half-Duplex Mode) */
+
+/* EMAC_STAADD Masks */
+#define STABUSY 0x00000001 /* Initiate Station Mgt Reg Access / STA Busy Stat */
+#define STAOP 0x00000002 /* Station Management Operation Code (Write/Read*) */
+#define STADISPRE 0x00000004 /* Disable Preamble Generation */
+#define STAIE 0x00000008 /* Station Mgt. Transfer Done Interrupt Enable */
+#define REGAD 0x000007C0 /* STA Register Address */
+#define PHYAD 0x0000F800 /* PHY Device Address */
+
+#define SET_REGAD(x) (((x)&0x1F)<< 6 ) /* Set STA Register Address */
+#define SET_PHYAD(x) (((x)&0x1F)<< 11 ) /* Set PHY Device Address */
+
+/* EMAC_STADAT Mask */
+#define STADATA 0x0000FFFF /* Station Management Data */
+
+/* EMAC_FLC Masks */
+#define FLCBUSY 0x00000001 /* Send Flow Ctrl Frame / Flow Ctrl Busy Status */
+#define FLCE 0x00000002 /* Flow Control Enable */
+#define PCF 0x00000004 /* Pass Control Frames */
+#define BKPRSEN 0x00000008 /* Enable Backpressure */
+#define FLCPAUSE 0xFFFF0000 /* Pause Time */
+
+#define SET_FLCPAUSE(x) (((x)&0xFFFF)<< 16) /* Set Pause Time */
+
+/* EMAC_WKUP_CTL Masks */
+#define CAPWKFRM 0x00000001 /* Capture Wake-Up Frames */
+#define MPKE 0x00000002 /* Magic Packet Enable */
+#define RWKE 0x00000004 /* Remote Wake-Up Frame Enable */
+#define GUWKE 0x00000008 /* Global Unicast Wake Enable */
+#define MPKS 0x00000020 /* Magic Packet Received Status */
+#define RWKS 0x00000F00 /* Wake-Up Frame Received Status, Filters 3:0 */
+
+/* EMAC_WKUP_FFCMD Masks */
+#define WF0_E 0x00000001 /* Enable Wake-Up Filter 0 */
+#define WF0_T 0x00000008 /* Wake-Up Filter 0 Addr Type (Multicast/Unicast*) */
+#define WF1_E 0x00000100 /* Enable Wake-Up Filter 1 */
+#define WF1_T 0x00000800 /* Wake-Up Filter 1 Addr Type (Multicast/Unicast*) */
+#define WF2_E 0x00010000 /* Enable Wake-Up Filter 2 */
+#define WF2_T 0x00080000 /* Wake-Up Filter 2 Addr Type (Multicast/Unicast*) */
+#define WF3_E 0x01000000 /* Enable Wake-Up Filter 3 */
+#define WF3_T 0x08000000 /* Wake-Up Filter 3 Addr Type (Multicast/Unicast*) */
+
+/* EMAC_WKUP_FFOFF Masks */
+#define WF0_OFF 0x000000FF /* Wake-Up Filter 0 Pattern Offset */
+#define WF1_OFF 0x0000FF00 /* Wake-Up Filter 1 Pattern Offset */
+#define WF2_OFF 0x00FF0000 /* Wake-Up Filter 2 Pattern Offset */
+#define WF3_OFF 0xFF000000 /* Wake-Up Filter 3 Pattern Offset */
+
+#define SET_WF0_OFF(x) (((x)&0xFF)<< 0 ) /* Set Wake-Up Filter 0 Byte Offset */
+#define SET_WF1_OFF(x) (((x)&0xFF)<< 8 ) /* Set Wake-Up Filter 1 Byte Offset */
+#define SET_WF2_OFF(x) (((x)&0xFF)<< 16 ) /* Set Wake-Up Filter 2 Byte Offset */
+#define SET_WF3_OFF(x) (((x)&0xFF)<< 24 ) /* Set Wake-Up Filter 3 Byte Offset */
+/* Set ALL Offsets */
+#define SET_WF_OFFS(x0,x1,x2,x3) (SET_WF0_OFF((x0))|SET_WF1_OFF((x1))|SET_WF2_OFF((x2))|SET_WF3_OFF((x3)))
+
+/* EMAC_WKUP_FFCRC0 Masks */
+#define WF0_CRC 0x0000FFFF /* Wake-Up Filter 0 Pattern CRC */
+#define WF1_CRC 0xFFFF0000 /* Wake-Up Filter 1 Pattern CRC */
+
+#define SET_WF0_CRC(x) (((x)&0xFFFF)<< 0 ) /* Set Wake-Up Filter 0 Target CRC */
+#define SET_WF1_CRC(x) (((x)&0xFFFF)<< 16 ) /* Set Wake-Up Filter 1 Target CRC */
+
+/* EMAC_WKUP_FFCRC1 Masks */
+#define WF2_CRC 0x0000FFFF /* Wake-Up Filter 2 Pattern CRC */
+#define WF3_CRC 0xFFFF0000 /* Wake-Up Filter 3 Pattern CRC */
+
+#define SET_WF2_CRC(x) (((x)&0xFFFF)<< 0 ) /* Set Wake-Up Filter 2 Target CRC */
+#define SET_WF3_CRC(x) (((x)&0xFFFF)<< 16 ) /* Set Wake-Up Filter 3 Target CRC */
+
+/* EMAC_SYSCTL Masks */
+#define PHYIE 0x00000001 /* PHY_INT Interrupt Enable */
+#define RXDWA 0x00000002 /* Receive Frame DMA Word Alignment (Odd/Even*) */
+#define RXCKS 0x00000004 /* Enable RX Frame TCP/UDP Checksum Computation */
+#define MDCDIV 0x00003F00 /* SCLK:MDC Clock Divisor [MDC=SCLK/(2*(N+1))] */
+
+#define SET_MDCDIV(x) (((x)&0x3F)<< 8) /* Set MDC Clock Divisor */
+
+/* EMAC_SYSTAT Masks */
+#define PHYINT 0x00000001 /* PHY_INT Interrupt Status */
+#define MMCINT 0x00000002 /* MMC Counter Interrupt Status */
+#define RXFSINT 0x00000004 /* RX Frame-Status Interrupt Status */
+#define TXFSINT 0x00000008 /* TX Frame-Status Interrupt Status */
+#define WAKEDET 0x00000010 /* Wake-Up Detected Status */
+#define RXDMAERR 0x00000020 /* RX DMA Direction Error Status */
+#define TXDMAERR 0x00000040 /* TX DMA Direction Error Status */
+#define STMDONE 0x00000080 /* Station Mgt. Transfer Done Interrupt Status */
+
+/* EMAC_RX_STAT, EMAC_RX_STKY, and EMAC_RX_IRQE Masks */
+#define RX_FRLEN 0x000007FF /* Frame Length In Bytes */
+#define RX_COMP 0x00001000 /* RX Frame Complete */
+#define RX_OK 0x00002000 /* RX Frame Received With No Errors */
+#define RX_LONG 0x00004000 /* RX Frame Too Long Error */
+#define RX_ALIGN 0x00008000 /* RX Frame Alignment Error */
+#define RX_CRC 0x00010000 /* RX Frame CRC Error */
+#define RX_LEN 0x00020000 /* RX Frame Length Error */
+#define RX_FRAG 0x00040000 /* RX Frame Fragment Error */
+#define RX_ADDR 0x00080000 /* RX Frame Address Filter Failed Error */
+#define RX_DMAO 0x00100000 /* RX Frame DMA Overrun Error */
+#define RX_PHY 0x00200000 /* RX Frame PHY Error */
+#define RX_LATE 0x00400000 /* RX Frame Late Collision Error */
+#define RX_RANGE 0x00800000 /* RX Frame Length Field Out of Range Error */
+#define RX_MULTI 0x01000000 /* RX Multicast Frame Indicator */
+#define RX_BROAD 0x02000000 /* RX Broadcast Frame Indicator */
+#define RX_CTL 0x04000000 /* RX Control Frame Indicator */
+#define RX_UCTL 0x08000000 /* Unsupported RX Control Frame Indicator */
+#define RX_TYPE 0x10000000 /* RX Typed Frame Indicator */
+#define RX_VLAN1 0x20000000 /* RX VLAN1 Frame Indicator */
+#define RX_VLAN2 0x40000000 /* RX VLAN2 Frame Indicator */
+#define RX_ACCEPT 0x80000000 /* RX Frame Accepted Indicator */
+
+/* EMAC_TX_STAT, EMAC_TX_STKY, and EMAC_TX_IRQE Masks */
+#define TX_COMP 0x00000001 /* TX Frame Complete */
+#define TX_OK 0x00000002 /* TX Frame Sent With No Errors */
+#define TX_ECOLL 0x00000004 /* TX Frame Excessive Collision Error */
+#define TX_LATE 0x00000008 /* TX Frame Late Collision Error */
+#define TX_DMAU 0x00000010 /* TX Frame DMA Underrun Error (STAT) */
+#define TX_MACE 0x00000010 /* Internal MAC Error Detected (STKY and IRQE) */
+#define TX_EDEFER 0x00000020 /* TX Frame Excessive Deferral Error */
+#define TX_BROAD 0x00000040 /* TX Broadcast Frame Indicator */
+#define TX_MULTI 0x00000080 /* TX Multicast Frame Indicator */
+#define TX_CCNT 0x00000F00 /* TX Frame Collision Count */
+#define TX_DEFER 0x00001000 /* TX Frame Deferred Indicator */
+#define TX_CRS 0x00002000 /* TX Frame Carrier Sense Not Asserted Error */
+#define TX_LOSS 0x00004000 /* TX Frame Carrier Lost During TX Error */
+#define TX_RETRY 0x00008000 /* TX Frame Successful After Retry */
+#define TX_FRLEN 0x07FF0000 /* TX Frame Length (Bytes) */
+
+/* EMAC_MMC_CTL Masks */
+#define RSTC 0x00000001 /* Reset All Counters */
+#define CROLL 0x00000002 /* Counter Roll-Over Enable */
+#define CCOR 0x00000004 /* Counter Clear-On-Read Mode Enable */
+#define MMCE 0x00000008 /* Enable MMC Counter Operation */
+
+/* EMAC_MMC_RIRQS and EMAC_MMC_RIRQE Masks */
+#define RX_OK_CNT 0x00000001 /* RX Frames Received With No Errors */
+#define RX_FCS_CNT 0x00000002 /* RX Frames W/Frame Check Sequence Errors */
+#define RX_ALIGN_CNT 0x00000004 /* RX Frames With Alignment Errors */
+#define RX_OCTET_CNT 0x00000008 /* RX Octets Received OK */
+#define RX_LOST_CNT 0x00000010 /* RX Frames Lost Due To Internal MAC RX Error */
+#define RX_UNI_CNT 0x00000020 /* Unicast RX Frames Received OK */
+#define RX_MULTI_CNT 0x00000040 /* Multicast RX Frames Received OK */
+#define RX_BROAD_CNT 0x00000080 /* Broadcast RX Frames Received OK */
+#define RX_IRL_CNT 0x00000100 /* RX Frames With In-Range Length Errors */
+#define RX_ORL_CNT 0x00000200 /* RX Frames With Out-Of-Range Length Errors */
+#define RX_LONG_CNT 0x00000400 /* RX Frames With Frame Too Long Errors */
+#define RX_MACCTL_CNT 0x00000800 /* MAC Control RX Frames Received */
+#define RX_OPCODE_CTL 0x00001000 /* Unsupported Op-Code RX Frames Received */
+#define RX_PAUSE_CNT 0x00002000 /* PAUSEMAC Control RX Frames Received */
+#define RX_ALLF_CNT 0x00004000 /* All RX Frames Received */
+#define RX_ALLO_CNT 0x00008000 /* All RX Octets Received */
+#define RX_TYPED_CNT 0x00010000 /* Typed RX Frames Received */
+#define RX_SHORT_CNT 0x00020000 /* RX Frame Fragments (< 64 Bytes) Received */
+#define RX_EQ64_CNT 0x00040000 /* 64-Byte RX Frames Received */
+#define RX_LT128_CNT 0x00080000 /* 65-127-Byte RX Frames Received */
+#define RX_LT256_CNT 0x00100000 /* 128-255-Byte RX Frames Received */
+#define RX_LT512_CNT 0x00200000 /* 256-511-Byte RX Frames Received */
+#define RX_LT1024_CNT 0x00400000 /* 512-1023-Byte RX Frames Received */
+#define RX_GE1024_CNT 0x00800000 /* 1024-Max-Byte RX Frames Received */
+
+/* EMAC_MMC_TIRQS and EMAC_MMC_TIRQE Masks */
+#define TX_OK_CNT 0x00000001 /* TX Frames Sent OK */
+#define TX_SCOLL_CNT 0x00000002 /* TX Frames With Single Collisions */
+#define TX_MCOLL_CNT 0x00000004 /* TX Frames With Multiple Collisions */
+#define TX_OCTET_CNT 0x00000008 /* TX Octets Sent OK */
+#define TX_DEFER_CNT 0x00000010 /* TX Frames With Deferred Transmission */
+#define TX_LATE_CNT 0x00000020 /* TX Frames With Late Collisions */
+#define TX_ABORTC_CNT 0x00000040 /* TX Frames Aborted Due To Excess Collisions */
+#define TX_LOST_CNT 0x00000080 /* TX Frames Lost Due To Internal MAC TX Error */
+#define TX_CRS_CNT 0x00000100 /* TX Frames With Carrier Sense Errors */
+#define TX_UNI_CNT 0x00000200 /* Unicast TX Frames Sent */
+#define TX_MULTI_CNT 0x00000400 /* Multicast TX Frames Sent */
+#define TX_BROAD_CNT 0x00000800 /* Broadcast TX Frames Sent */
+#define TX_EXDEF_CTL 0x00001000 /* TX Frames With Excessive Deferral */
+#define TX_MACCTL_CNT 0x00002000 /* MAC Control TX Frames Sent */
+#define TX_ALLF_CNT 0x00004000 /* All TX Frames Sent */
+#define TX_ALLO_CNT 0x00008000 /* All TX Octets Sent */
+#define TX_EQ64_CNT 0x00010000 /* 64-Byte TX Frames Sent */
+#define TX_LT128_CNT 0x00020000 /* 65-127-Byte TX Frames Sent */
+#define TX_LT256_CNT 0x00040000 /* 128-255-Byte TX Frames Sent */
+#define TX_LT512_CNT 0x00080000 /* 256-511-Byte TX Frames Sent */
+#define TX_LT1024_CNT 0x00100000 /* 512-1023-Byte TX Frames Sent */
+#define TX_GE1024_CNT 0x00200000 /* 1024-Max-Byte TX Frames Sent */
+#define TX_ABORT_CNT 0x00400000 /* TX Frames Aborted */
+
+#endif /* _DEF_BF537_H */
diff --git a/include/asm-blackfin/mach-bf537/dma.h b/include/asm-blackfin/mach-bf537/dma.h
new file mode 100644
index 0000000..7a96404
--- /dev/null
+++ b/include/asm-blackfin/mach-bf537/dma.h
@@ -0,0 +1,55 @@
+/*
+ * file: include/asm-blackfin/mach-bf537/dma.h
+ * based on:
+ * author:
+ *
+ * created:
+ * description:
+ * system mmr register map
+ * rev:
+ *
+ * modified:
+ *
+ *
+ * bugs: enter bugs at http://blackfin.uclinux.org/
+ *
+ * this program is free software; you can redistribute it and/or modify
+ * it under the terms of the gnu general public license as published by
+ * the free software foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * this program is distributed in the hope that it will be useful,
+ * but without any warranty; without even the implied warranty of
+ * merchantability or fitness for a particular purpose. see the
+ * gnu general public license for more details.
+ *
+ * you should have received a copy of the gnu general public license
+ * along with this program; see the file copying.
+ * if not, write to the free software foundation,
+ * 59 temple place - suite 330, boston, ma 02111-1307, usa.
+ */
+
+#ifndef _MACH_DMA_H_
+#define _MACH_DMA_H_
+
+#define MAX_BLACKFIN_DMA_CHANNEL 16
+
+#define CH_PPI 0
+#define CH_EMAC_RX 1
+#define CH_EMAC_TX 2
+#define CH_SPORT0_RX 3
+#define CH_SPORT0_TX 4
+#define CH_SPORT1_RX 5
+#define CH_SPORT1_TX 6
+#define CH_SPI 7
+#define CH_UART0_RX 8
+#define CH_UART0_TX 9
+#define CH_UART1_RX 10
+#define CH_UART1_TX 11
+
+#define CH_MEM_STREAM0_DEST 12 /* TX */
+#define CH_MEM_STREAM0_SRC 13 /* RX */
+#define CH_MEM_STREAM1_DEST 14 /* TX */
+#define CH_MEM_STREAM1_SRC 15 /* RX */
+
+#endif
diff --git a/include/asm-blackfin/mach-bf537/irq.h b/include/asm-blackfin/mach-bf537/irq.h
new file mode 100644
index 0000000..8af2a83
--- /dev/null
+++ b/include/asm-blackfin/mach-bf537/irq.h
@@ -0,0 +1,219 @@
+/*
+ * file: include/asm-blackfin/mach-bf537/irq.h
+ * based on:
+ * author:
+ *
+ * created:
+ * description:
+ * system mmr register map
+ * rev:
+ *
+ * modified:
+ *
+ *
+ * bugs: enter bugs at http://blackfin.uclinux.org/
+ *
+ * this program is free software; you can redistribute it and/or modify
+ * it under the terms of the gnu general public license as published by
+ * the free software foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * this program is distributed in the hope that it will be useful,
+ * but without any warranty; without even the implied warranty of
+ * merchantability or fitness for a particular purpose. see the
+ * gnu general public license for more details.
+ *
+ * you should have received a copy of the gnu general public license
+ * along with this program; see the file copying.
+ * if not, write to the free software foundation,
+ * 59 temple place - suite 330, boston, ma 02111-1307, usa.
+ */
+
+#ifndef _BF537_IRQ_H_
+#define _BF537_IRQ_H_
+
+/*
+ * Interrupt source definitions
+ Event Source Core Event Name
+Core Emulation **
+ Events (highest priority) EMU 0
+ Reset RST 1
+ NMI NMI 2
+ Exception EVX 3
+ Reserved -- 4
+ Hardware Error IVHW 5
+ Core Timer IVTMR 6 *
+
+.....
+
+ Software Interrupt 1 IVG14 31
+ Software Interrupt 2 --
+ (lowest priority) IVG15 32 *
+ */
+
+#define SYS_IRQS 41
+#define NR_PERI_INTS 32
+
+/* The ABSTRACT IRQ definitions */
+/** the first seven of the following are fixed, the rest you change if you need to **/
+#define IRQ_EMU 0 /*Emulation */
+#define IRQ_RST 1 /*reset */
+#define IRQ_NMI 2 /*Non Maskable */
+#define IRQ_EVX 3 /*Exception */
+#define IRQ_UNUSED 4 /*- unused interrupt*/
+#define IRQ_HWERR 5 /*Hardware Error */
+#define IRQ_CORETMR 6 /*Core timer */
+
+#define IRQ_PLL_WAKEUP 7 /*PLL Wakeup Interrupt */
+#define IRQ_DMA_ERROR 8 /*DMA Error (general) */
+#define IRQ_GENERIC_ERROR 9 /*GENERIC Error Interrupt */
+#define IRQ_RTC 10 /*RTC Interrupt */
+#define IRQ_PPI 11 /*DMA0 Interrupt (PPI) */
+#define IRQ_SPORT0_RX 12 /*DMA3 Interrupt (SPORT0 RX) */
+#define IRQ_SPORT0_TX 13 /*DMA4 Interrupt (SPORT0 TX) */
+#define IRQ_SPORT1_RX 14 /*DMA5 Interrupt (SPORT1 RX) */
+#define IRQ_SPORT1_TX 15 /*DMA6 Interrupt (SPORT1 TX) */
+#define IRQ_TWI 16 /*TWI Interrupt */
+#define IRQ_SPI 17 /*DMA7 Interrupt (SPI) */
+#define IRQ_UART0_RX 18 /*DMA8 Interrupt (UART0 RX) */
+#define IRQ_UART0_TX 19 /*DMA9 Interrupt (UART0 TX) */
+#define IRQ_UART1_RX 20 /*DMA10 Interrupt (UART1 RX) */
+#define IRQ_UART1_TX 21 /*DMA11 Interrupt (UART1 TX) */
+#define IRQ_CAN_RX 22 /*CAN Receive Interrupt */
+#define IRQ_CAN_TX 23 /*CAN Transmit Interrupt */
+#define IRQ_MAC_RX 24 /*DMA1 (Ethernet RX) Interrupt */
+#define IRQ_MAC_TX 25 /*DMA2 (Ethernet TX) Interrupt */
+#define IRQ_TMR0 26 /*Timer 0 */
+#define IRQ_TMR1 27 /*Timer 1 */
+#define IRQ_TMR2 28 /*Timer 2 */
+#define IRQ_TMR3 29 /*Timer 3 */
+#define IRQ_TMR4 30 /*Timer 4 */
+#define IRQ_TMR5 31 /*Timer 5 */
+#define IRQ_TMR6 32 /*Timer 6 */
+#define IRQ_TMR7 33 /*Timer 7 */
+#define IRQ_PROG_INTA 34 /* PF Ports F&G (PF15:0) Interrupt A */
+#define IRQ_PORTG_INTB 35 /* PF Port G (PF15:0) Interrupt B */
+#define IRQ_MEM_DMA0 36 /*(Memory DMA Stream 0) */
+#define IRQ_MEM_DMA1 37 /*(Memory DMA Stream 1) */
+#define IRQ_PROG_INTB 38 /* PF Ports F (PF15:0) Interrupt B */
+#define IRQ_WATCH 38 /*Watch Dog Timer */
+#define IRQ_SW_INT1 40 /*Software Int 1 */
+#define IRQ_SW_INT2 41 /*Software Int 2 (reserved for SYSCALL) */
+
+#define IRQ_PPI_ERROR 42 /*PPI Error Interrupt */
+#define IRQ_CAN_ERROR 43 /*CAN Error Interrupt */
+#define IRQ_MAC_ERROR 44 /*PPI Error Interrupt */
+#define IRQ_SPORT0_ERROR 45 /*SPORT0 Error Interrupt */
+#define IRQ_SPORT1_ERROR 46 /*SPORT1 Error Interrupt */
+#define IRQ_SPI_ERROR 47 /*SPI Error Interrupt */
+#define IRQ_UART0_ERROR 48 /*UART Error Interrupt */
+#define IRQ_UART1_ERROR 49 /*UART Error Interrupt */
+
+#define IRQ_PF0 50
+#define IRQ_PF1 51
+#define IRQ_PF2 52
+#define IRQ_PF3 53
+#define IRQ_PF4 54
+#define IRQ_PF5 55
+#define IRQ_PF6 56
+#define IRQ_PF7 57
+#define IRQ_PF8 58
+#define IRQ_PF9 59
+#define IRQ_PF10 60
+#define IRQ_PF11 61
+#define IRQ_PF12 62
+#define IRQ_PF13 63
+#define IRQ_PF14 64
+#define IRQ_PF15 65
+
+#define IRQ_PG0 66
+#define IRQ_PG1 67
+#define IRQ_PG2 68
+#define IRQ_PG3 69
+#define IRQ_PG4 70
+#define IRQ_PG5 71
+#define IRQ_PG6 72
+#define IRQ_PG7 73
+#define IRQ_PG8 74
+#define IRQ_PG9 75
+#define IRQ_PG10 76
+#define IRQ_PG11 77
+#define IRQ_PG12 78
+#define IRQ_PG13 79
+#define IRQ_PG14 80
+#define IRQ_PG15 81
+
+#define IRQ_PH0 82
+#define IRQ_PH1 83
+#define IRQ_PH2 84
+#define IRQ_PH3 85
+#define IRQ_PH4 86
+#define IRQ_PH5 87
+#define IRQ_PH6 88
+#define IRQ_PH7 89
+#define IRQ_PH8 90
+#define IRQ_PH9 91
+#define IRQ_PH10 92
+#define IRQ_PH11 93
+#define IRQ_PH12 94
+#define IRQ_PH13 95
+#define IRQ_PH14 96
+#define IRQ_PH15 97
+
+#ifdef CONFIG_IRQCHIP_DEMUX_GPIO
+#define NR_IRQS (IRQ_PH15+1)
+#else
+#define NR_IRQS (IRQ_UART1_ERROR+1)
+#endif
+
+#define IVG7 7
+#define IVG8 8
+#define IVG9 9
+#define IVG10 10
+#define IVG11 11
+#define IVG12 12
+#define IVG13 13
+#define IVG14 14
+#define IVG15 15
+
+/* IAR0 BIT FIELDS*/
+#define IRQ_PLL_WAKEUP_POS 0
+#define IRQ_DMA_ERROR_POS 4
+#define IRQ_ERROR_POS 8
+#define IRQ_RTC_POS 12
+#define IRQ_PPI_POS 16
+#define IRQ_SPORT0_RX_POS 20
+#define IRQ_SPORT0_TX_POS 24
+#define IRQ_SPORT1_RX_POS 28
+
+/* IAR1 BIT FIELDS*/
+#define IRQ_SPORT1_TX_POS 0
+#define IRQ_TWI_POS 4
+#define IRQ_SPI_POS 8
+#define IRQ_UART0_RX_POS 12
+#define IRQ_UART0_TX_POS 16
+#define IRQ_UART1_RX_POS 20
+#define IRQ_UART1_TX_POS 24
+#define IRQ_CAN_RX_POS 28
+
+/* IAR2 BIT FIELDS*/
+#define IRQ_CAN_TX_POS 0
+#define IRQ_MAC_RX_POS 4
+#define IRQ_MAC_TX_POS 8
+#define IRQ_TMR0_POS 12
+#define IRQ_TMR1_POS 16
+#define IRQ_TMR2_POS 20
+#define IRQ_TMR3_POS 24
+#define IRQ_TMR4_POS 28
+
+/* IAR3 BIT FIELDS*/
+#define IRQ_TMR5_POS 0
+#define IRQ_TMR6_POS 4
+#define IRQ_TMR7_POS 8
+#define IRQ_PROG_INTA_POS 12
+#define IRQ_PORTG_INTB_POS 16
+#define IRQ_MEM_DMA0_POS 20
+#define IRQ_MEM_DMA1_POS 24
+#define IRQ_WATCH_POS 28
+
+#endif /* _BF537_IRQ_H_ */
diff --git a/include/asm-blackfin/mach-bf537/mem_init.h b/include/asm-blackfin/mach-bf537/mem_init.h
new file mode 100644
index 0000000..9ad979d
--- /dev/null
+++ b/include/asm-blackfin/mach-bf537/mem_init.h
@@ -0,0 +1,330 @@
+/*
+ * File: include/asm-blackfin/mach-bf537/mem_init.h
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Rev:
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.
+ * If not, write to the Free Software Foundation,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#if (CONFIG_MEM_MT48LC16M16A2TG_75 || CONFIG_MEM_MT48LC64M4A2FB_7E || CONFIG_MEM_MT48LC16M8A2TG_75 || CONFIG_MEM_GENERIC_BOARD || CONFIG_MEM_MT48LC32M8A2_75)
+#if (CONFIG_SCLK_HZ > 119402985)
+#define SDRAM_tRP TRP_2
+#define SDRAM_tRP_num 2
+#define SDRAM_tRAS TRAS_7
+#define SDRAM_tRAS_num 7
+#define SDRAM_tRCD TRCD_2
+#define SDRAM_tWR TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 104477612) && (CONFIG_SCLK_HZ <= 119402985)
+#define SDRAM_tRP TRP_2
+#define SDRAM_tRP_num 2
+#define SDRAM_tRAS TRAS_6
+#define SDRAM_tRAS_num 6
+#define SDRAM_tRCD TRCD_2
+#define SDRAM_tWR TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 89552239) && (CONFIG_SCLK_HZ <= 104477612)
+#define SDRAM_tRP TRP_2
+#define SDRAM_tRP_num 2
+#define SDRAM_tRAS TRAS_5
+#define SDRAM_tRAS_num 5
+#define SDRAM_tRCD TRCD_2
+#define SDRAM_tWR TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 74626866) && (CONFIG_SCLK_HZ <= 89552239)
+#define SDRAM_tRP TRP_2
+#define SDRAM_tRP_num 2
+#define SDRAM_tRAS TRAS_4
+#define SDRAM_tRAS_num 4
+#define SDRAM_tRCD TRCD_2
+#define SDRAM_tWR TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 66666667) && (CONFIG_SCLK_HZ <= 74626866)
+#define SDRAM_tRP TRP_2
+#define SDRAM_tRP_num 2
+#define SDRAM_tRAS TRAS_3
+#define SDRAM_tRAS_num 3
+#define SDRAM_tRCD TRCD_2
+#define SDRAM_tWR TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 59701493) && (CONFIG_SCLK_HZ <= 66666667)
+#define SDRAM_tRP TRP_1
+#define SDRAM_tRP_num 1
+#define SDRAM_tRAS TRAS_4
+#define SDRAM_tRAS_num 3
+#define SDRAM_tRCD TRCD_1
+#define SDRAM_tWR TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 44776119) && (CONFIG_SCLK_HZ <= 59701493)
+#define SDRAM_tRP TRP_1
+#define SDRAM_tRP_num 1
+#define SDRAM_tRAS TRAS_3
+#define SDRAM_tRAS_num 3
+#define SDRAM_tRCD TRCD_1
+#define SDRAM_tWR TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 29850746) && (CONFIG_SCLK_HZ <= 44776119)
+#define SDRAM_tRP TRP_1
+#define SDRAM_tRP_num 1
+#define SDRAM_tRAS TRAS_2
+#define SDRAM_tRAS_num 2
+#define SDRAM_tRCD TRCD_1
+#define SDRAM_tWR TWR_2
+#endif
+#if (CONFIG_SCLK_HZ <= 29850746)
+#define SDRAM_tRP TRP_1
+#define SDRAM_tRP_num 1
+#define SDRAM_tRAS TRAS_1
+#define SDRAM_tRAS_num 1
+#define SDRAM_tRCD TRCD_1
+#define SDRAM_tWR TWR_2
+#endif
+#endif
+
+#if (CONFIG_MEM_MT48LC16M16A2TG_75)
+ /*SDRAM INFORMATION: */
+#define SDRAM_Tref 64 /* Refresh period in milliseconds */
+#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */
+#define SDRAM_CL CL_3
+#endif
+
+#if (CONFIG_MEM_MT48LC16M8A2TG_75)
+ /*SDRAM INFORMATION: */
+#define SDRAM_Tref 64 /* Refresh period in milliseconds */
+#define SDRAM_NRA 4096 /* Number of row addresses in SDRAM */
+#define SDRAM_CL CL_3
+#endif
+
+#if (CONFIG_MEM_MT48LC32M8A2_75)
+ /*SDRAM INFORMATION: */
+#define SDRAM_Tref 64 /* Refresh period in milliseconds */
+#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */
+#define SDRAM_CL CL_3
+#endif
+
+#if (CONFIG_MEM_MT48LC64M4A2FB_7E)
+ /*SDRAM INFORMATION: */
+#define SDRAM_Tref 64 /* Refresh period in milliseconds */
+#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */
+#define SDRAM_CL CL_3
+#endif
+
+#if (CONFIG_MEM_GENERIC_BOARD)
+ /*SDRAM INFORMATION: Modify this for your board */
+#define SDRAM_Tref 64 /* Refresh period in milliseconds */
+#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */
+#define SDRAM_CL CL_3
+#endif
+
+#if (CONFIG_MEM_SIZE == 128)
+#define SDRAM_SIZE EBSZ_128
+#endif
+#if (CONFIG_MEM_SIZE == 64)
+#define SDRAM_SIZE EBSZ_64
+#endif
+#if (CONFIG_MEM_SIZE == 32)
+#define SDRAM_SIZE EBSZ_32
+#endif
+#if (CONFIG_MEM_SIZE == 16)
+#define SDRAM_SIZE EBSZ_16
+#endif
+#if (CONFIG_MEM_ADD_WIDTH == 11)
+#define SDRAM_WIDTH EBCAW_11
+#endif
+#if (CONFIG_MEM_ADD_WIDTH == 10)
+#define SDRAM_WIDTH EBCAW_10
+#endif
+#if (CONFIG_MEM_ADD_WIDTH == 9)
+#define SDRAM_WIDTH EBCAW_9
+#endif
+#if (CONFIG_MEM_ADD_WIDTH == 8)
+#define SDRAM_WIDTH EBCAW_8
+#endif
+
+#define mem_SDBCTL (SDRAM_WIDTH | SDRAM_SIZE | EBE)
+
+/* Equation from section 17 (p17-46) of BF533 HRM */
+#define mem_SDRRC (((CONFIG_SCLK_HZ / 1000) * SDRAM_Tref) / SDRAM_NRA) - (SDRAM_tRAS_num + SDRAM_tRP_num)
+
+/* Enable SCLK Out */
+#define mem_SDGCTL (SCTLE | SDRAM_CL | SDRAM_tRAS | SDRAM_tRP | SDRAM_tRCD | SDRAM_tWR | PSS)
+
+#if defined CONFIG_CLKIN_HALF
+#define CLKIN_HALF 1
+#else
+#define CLKIN_HALF 0
+#endif
+
+#if defined CONFIG_PLL_BYPASS
+#define PLL_BYPASS 1
+#else
+#define PLL_BYPASS 0
+#endif
+
+/***************************************Currently Not Being Used *********************************/
+#define flash_EBIU_AMBCTL_WAT ((CONFIG_FLASH_SPEED_BWAT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
+#define flash_EBIU_AMBCTL_RAT ((CONFIG_FLASH_SPEED_BRAT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
+#define flash_EBIU_AMBCTL_HT ((CONFIG_FLASH_SPEED_BHT * 4) / (4000000000 / CONFIG_SCLK_HZ))
+#define flash_EBIU_AMBCTL_ST ((CONFIG_FLASH_SPEED_BST * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
+#define flash_EBIU_AMBCTL_TT ((CONFIG_FLASH_SPEED_BTT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
+
+#if (flash_EBIU_AMBCTL_TT > 3)
+#define flash_EBIU_AMBCTL0_TT B0TT_4
+#endif
+#if (flash_EBIU_AMBCTL_TT == 3)
+#define flash_EBIU_AMBCTL0_TT B0TT_3
+#endif
+#if (flash_EBIU_AMBCTL_TT == 2)
+#define flash_EBIU_AMBCTL0_TT B0TT_2
+#endif
+#if (flash_EBIU_AMBCTL_TT < 2)
+#define flash_EBIU_AMBCTL0_TT B0TT_1
+#endif
+
+#if (flash_EBIU_AMBCTL_ST > 3)
+#define flash_EBIU_AMBCTL0_ST B0ST_4
+#endif
+#if (flash_EBIU_AMBCTL_ST == 3)
+#define flash_EBIU_AMBCTL0_ST B0ST_3
+#endif
+#if (flash_EBIU_AMBCTL_ST == 2)
+#define flash_EBIU_AMBCTL0_ST B0ST_2
+#endif
+#if (flash_EBIU_AMBCTL_ST < 2)
+#define flash_EBIU_AMBCTL0_ST B0ST_1
+#endif
+
+#if (flash_EBIU_AMBCTL_HT > 2)
+#define flash_EBIU_AMBCTL0_HT B0HT_3
+#endif
+#if (flash_EBIU_AMBCTL_HT == 2)
+#define flash_EBIU_AMBCTL0_HT B0HT_2
+#endif
+#if (flash_EBIU_AMBCTL_HT == 1)
+#define flash_EBIU_AMBCTL0_HT B0HT_1
+#endif
+#if (flash_EBIU_AMBCTL_HT == 0 && CONFIG_FLASH_SPEED_BHT == 0)
+#define flash_EBIU_AMBCTL0_HT B0HT_0
+#endif
+#if (flash_EBIU_AMBCTL_HT == 0 && CONFIG_FLASH_SPEED_BHT != 0)
+#define flash_EBIU_AMBCTL0_HT B0HT_1
+#endif
+
+#if (flash_EBIU_AMBCTL_WAT > 14)
+#define flash_EBIU_AMBCTL0_WAT B0WAT_15
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 14)
+#define flash_EBIU_AMBCTL0_WAT B0WAT_14
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 13)
+#define flash_EBIU_AMBCTL0_WAT B0WAT_13
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 12)
+#define flash_EBIU_AMBCTL0_WAT B0WAT_12
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 11)
+#define flash_EBIU_AMBCTL0_WAT B0WAT_11
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 10)
+#define flash_EBIU_AMBCTL0_WAT B0WAT_10
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 9)
+#define flash_EBIU_AMBCTL0_WAT B0WAT_9
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 8)
+#define flash_EBIU_AMBCTL0_WAT B0WAT_8
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 7)
+#define flash_EBIU_AMBCTL0_WAT B0WAT_7
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 6)
+#define flash_EBIU_AMBCTL0_WAT B0WAT_6
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 5)
+#define flash_EBIU_AMBCTL0_WAT B0WAT_5
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 4)
+#define flash_EBIU_AMBCTL0_WAT B0WAT_4
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 3)
+#define flash_EBIU_AMBCTL0_WAT B0WAT_3
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 2)
+#define flash_EBIU_AMBCTL0_WAT B0WAT_2
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 1)
+#define flash_EBIU_AMBCTL0_WAT B0WAT_1
+#endif
+
+#if (flash_EBIU_AMBCTL_RAT > 14)
+#define flash_EBIU_AMBCTL0_RAT B0RAT_15
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 14)
+#define flash_EBIU_AMBCTL0_RAT B0RAT_14
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 13)
+#define flash_EBIU_AMBCTL0_RAT B0RAT_13
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 12)
+#define flash_EBIU_AMBCTL0_RAT B0RAT_12
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 11)
+#define flash_EBIU_AMBCTL0_RAT B0RAT_11
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 10)
+#define flash_EBIU_AMBCTL0_RAT B0RAT_10
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 9)
+#define flash_EBIU_AMBCTL0_RAT B0RAT_9
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 8)
+#define flash_EBIU_AMBCTL0_RAT B0RAT_8
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 7)
+#define flash_EBIU_AMBCTL0_RAT B0RAT_7
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 6)
+#define flash_EBIU_AMBCTL0_RAT B0RAT_6
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 5)
+#define flash_EBIU_AMBCTL0_RAT B0RAT_5
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 4)
+#define flash_EBIU_AMBCTL0_RAT B0RAT_4
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 3)
+#define flash_EBIU_AMBCTL0_RAT B0RAT_3
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 2)
+#define flash_EBIU_AMBCTL0_RAT B0RAT_2
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 1)
+#define flash_EBIU_AMBCTL0_RAT B0RAT_1
+#endif
+
+#define flash_EBIU_AMBCTL0 \
+ (flash_EBIU_AMBCTL0_WAT | flash_EBIU_AMBCTL0_RAT | flash_EBIU_AMBCTL0_HT | \
+ flash_EBIU_AMBCTL0_ST | flash_EBIU_AMBCTL0_TT | CONFIG_FLASH_SPEED_RDYEN)
diff --git a/include/asm-blackfin/mach-bf537/mem_map.h b/include/asm-blackfin/mach-bf537/mem_map.h
new file mode 100644
index 0000000..2a808c1
--- /dev/null
+++ b/include/asm-blackfin/mach-bf537/mem_map.h
@@ -0,0 +1,175 @@
+/*
+ * file: include/asm-blackfin/mach-bf537/mem_map.h
+ * based on:
+ * author:
+ *
+ * created:
+ * description:
+ * Memory MAP Common header file for blackfin BF537/6/4 of processors.
+ * rev:
+ *
+ * modified:
+ *
+ * bugs: enter bugs at http://blackfin.uclinux.org/
+ *
+ * this program is free software; you can redistribute it and/or modify
+ * it under the terms of the gnu general public license as published by
+ * the free software foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * this program is distributed in the hope that it will be useful,
+ * but without any warranty; without even the implied warranty of
+ * merchantability or fitness for a particular purpose. see the
+ * gnu general public license for more details.
+ *
+ * you should have received a copy of the gnu general public license
+ * along with this program; see the file copying.
+ * if not, write to the free software foundation,
+ * 59 temple place - suite 330, boston, ma 02111-1307, usa.
+ */
+
+#ifndef _MEM_MAP_537_H_
+#define _MEM_MAP_537_H_
+
+#define COREMMR_BASE 0xFFE00000 /* Core MMRs */
+#define SYSMMR_BASE 0xFFC00000 /* System MMRs */
+
+/* Async Memory Banks */
+#define ASYNC_BANK3_BASE 0x20300000 /* Async Bank 3 */
+#define ASYNC_BANK3_SIZE 0x00100000 /* 1M */
+#define ASYNC_BANK2_BASE 0x20200000 /* Async Bank 2 */
+#define ASYNC_BANK2_SIZE 0x00100000 /* 1M */
+#define ASYNC_BANK1_BASE 0x20100000 /* Async Bank 1 */
+#define ASYNC_BANK1_SIZE 0x00100000 /* 1M */
+#define ASYNC_BANK0_BASE 0x20000000 /* Async Bank 0 */
+#define ASYNC_BANK0_SIZE 0x00100000 /* 1M */
+
+/* Boot ROM Memory */
+
+#define BOOT_ROM_START 0xEF000000
+
+/* Level 1 Memory */
+
+/* Memory Map for ADSP-BF537 processors */
+
+#ifdef CONFIG_BLKFIN_CACHE
+#define BLKFIN_ICACHESIZE (16*1024)
+#else
+#define BLKFIN_ICACHESIZE (0*1024)
+#endif
+
+
+#ifdef CONFIG_BF537
+#define L1_CODE_START 0xFFA00000
+#define L1_DATA_A_START 0xFF800000
+#define L1_DATA_B_START 0xFF900000
+
+#define L1_CODE_LENGTH 0xC000
+
+#ifdef CONFIG_BLKFIN_DCACHE
+
+#ifdef CONFIG_BLKFIN_DCACHE_BANKA
+#define DMEM_CNTR (ACACHE_BSRAM | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH (0x8000 - 0x4000)
+#define L1_DATA_B_LENGTH 0x8000
+#define BLKFIN_DCACHESIZE (16*1024)
+#define BLKFIN_DSUPBANKS 1
+#else
+#define DMEM_CNTR (ACACHE_BCACHE | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH (0x8000 - 0x4000)
+#define L1_DATA_B_LENGTH (0x8000 - 0x4000)
+#define BLKFIN_DCACHESIZE (32*1024)
+#define BLKFIN_DSUPBANKS 2
+#endif
+
+#else
+#define DMEM_CNTR (ASRAM_BSRAM | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH 0x8000
+#define L1_DATA_B_LENGTH 0x8000
+#define BLKFIN_DCACHESIZE (0*1024)
+#define BLKFIN_DSUPBANKS 0
+#endif /*CONFIG_BLKFIN_DCACHE*/
+
+#endif /*CONFIG_BF537*/
+
+/* Memory Map for ADSP-BF536 processors */
+
+#ifdef CONFIG_BF536
+#define L1_CODE_START 0xFFA00000
+#define L1_DATA_A_START 0xFF804000
+#define L1_DATA_B_START 0xFF904000
+
+#define L1_CODE_LENGTH 0xC000
+
+
+#ifdef CONFIG_BLKFIN_DCACHE
+
+#ifdef CONFIG_BLKFIN_DCACHE_BANKA
+#define DMEM_CNTR (ACACHE_BSRAM | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH (0x4000 - 0x4000)
+#define L1_DATA_B_LENGTH 0x4000
+#define BLKFIN_DCACHESIZE (16*1024)
+#define BLKFIN_DSUPBANKS 1
+
+#else
+#define DMEM_CNTR (ACACHE_BCACHE | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH (0x4000 - 0x4000)
+#define L1_DATA_B_LENGTH (0x4000 - 0x4000)
+#define BLKFIN_DCACHESIZE (32*1024)
+#define BLKFIN_DSUPBANKS 2
+#endif
+
+#else
+#define DMEM_CNTR (ASRAM_BSRAM | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH 0x4000
+#define L1_DATA_B_LENGTH 0x4000
+#define BLKFIN_DCACHESIZE (0*1024)
+#define BLKFIN_DSUPBANKS 0
+#endif /*CONFIG_BLKFIN_DCACHE*/
+
+#endif
+
+/* Memory Map for ADSP-BF534 processors */
+
+#ifdef CONFIG_BF534
+#define L1_CODE_START 0xFFA00000
+#define L1_DATA_A_START 0xFF800000
+#define L1_DATA_B_START 0xFF900000
+
+#define L1_CODE_LENGTH 0xC000
+
+#ifdef CONFIG_BLKFIN_DCACHE
+
+#ifdef CONFIG_BLKFIN_DCACHE_BANKA
+#define DMEM_CNTR (ACACHE_BSRAM | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH (0x8000 - 0x4000)
+#define L1_DATA_B_LENGTH 0x8000
+#define BLKFIN_DCACHESIZE (16*1024)
+#define BLKFIN_DSUPBANKS 1
+
+#else
+#define DMEM_CNTR (ACACHE_BCACHE | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH (0x8000 - 0x4000)
+#define L1_DATA_B_LENGTH (0x8000 - 0x4000)
+#define BLKFIN_DCACHESIZE (32*1024)
+#define BLKFIN_DSUPBANKS 2
+#endif
+
+#else
+#define DMEM_CNTR (ASRAM_BSRAM | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH 0x8000
+#define L1_DATA_B_LENGTH 0x8000
+#define BLKFIN_DCACHESIZE (0*1024)
+#define BLKFIN_DSUPBANKS 0
+#endif /*CONFIG_BLKFIN_DCACHE*/
+
+#endif
+
+/* Scratch Pad Memory */
+
+#if defined(CONFIG_BF537) || defined(CONFIG_BF536) || defined(CONFIG_BF534)
+#define L1_SCRATCH_START 0xFFB00000
+#define L1_SCRATCH_LENGTH 0x1000
+#endif
+
+#endif /* _MEM_MAP_537_H_ */
diff --git a/include/asm-blackfin/mach-bf561/anomaly.h b/include/asm-blackfin/mach-bf561/anomaly.h
new file mode 100644
index 0000000..f5b32d6
--- /dev/null
+++ b/include/asm-blackfin/mach-bf561/anomaly.h
@@ -0,0 +1,184 @@
+
+/*
+ * File: include/asm-blackfin/mach-bf561/anomaly.h
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Rev:
+ *
+ * Modified:
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.
+ * If not, write to the Free Software Foundation,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+/* This file shoule be up to date with:
+ * - Revision L, 10Aug2006; ADSP-BF561 Silicon Anomaly List
+ */
+
+#ifndef _MACH_ANOMALY_H_
+#define _MACH_ANOMALY_H_
+
+/* We do not support 0.1 or 0.4 silicon - sorry */
+#if (defined(CONFIG_BF_REV_0_1) || defined(CONFIG_BF_REV_0_2) || defined(CONFIG_BF_REV_0_4))
+#error Kernel will not work on BF561 Version 0.1, 0.2, or 0.4
+#endif
+
+/* Issues that are common to 0.5 and 0.3 silicon */
+#if (defined(CONFIG_BF_REV_0_5) || defined(CONFIG_BF_REV_0_3))
+#define ANOMALY_05000074 /* A multi issue instruction with dsp32shiftimm in
+ slot1 and store of a P register in slot 2 is not
+ supported */
+#define ANOMALY_05000099 /* UART Line Status Register (UART_LSR) bits are not
+ updated at the same time. */
+#define ANOMALY_05000120 /* Testset instructions restricted to 32-bit aligned
+ memory locations */
+#define ANOMALY_05000122 /* Rx.H cannot be used to access 16-bit System MMR
+ registers */
+#define ANOMALY_05000127 /* Signbits instruction not functional under certain
+ conditions */
+#define ANOMALY_05000149 /* IMDMA S1/D1 channel may stall */
+#define ANOMALY_05000166 /* PPI Data Lengths Between 8 and 16 do not zero out
+ upper bits */
+#define ANOMALY_05000167 /* Turning Serial Ports on With External Frame Syncs */
+#define ANOMALY_05000180 /* PPI_DELAY not functional in PPI modes with 0 frame
+ syncs */
+#define ANOMALY_05000182 /* IMDMA does not operate to full speed for 600MHz
+ and higher devices */
+#define ANOMALY_05000187 /* IMDMA Corrupted Data after a Halt */
+#define ANOMALY_05000190 /* PPI not functional at core voltage < 1Volt */
+#define ANOMALY_05000208 /* VSTAT status bit in PLL_STAT register is not
+ functional */
+#define ANOMALY_05000245 /* Spurious Hardware Error from an access in the
+ shadow of a conditional branch */
+#define ANOMALY_05000257 /* Interrupt/Exception during short hardware loop
+ may cause bad instruction fetches */
+#define ANOMALY_05000265 /* Sensitivity to noise with slow input edge rates on
+ external SPORT TX and RX clocks */
+#define ANOMALY_05000267 /* IMDMA may corrupt data under certain conditions */
+#define ANOMALY_05000269 /* High I/O activity causes output voltage of internal
+ voltage regulator (VDDint) to increase */
+#define ANOMALY_05000270 /* High I/O activity causes output voltage of internal
+ voltage regulator (VDDint) to decrease */
+#define ANOMALY_05000272 /* Certain data cache write through modes fail for
+ VDDint <=0.9V */
+#define ANOMALY_05000274 /* Data cache write back to external synchronous memory
+ may be lost */
+#define ANOMALY_05000275 /* PPI Timing and sampling informaton updates */
+#define ANOMALY_05000312 /* Errors when SSYNC, CSYNC, or loads to LT, LB and LC
+ registers are interrupted */
+
+#endif /* (defined(CONFIG_BF_REV_0_5) || defined(CONFIG_BF_REV_0_3)) */
+
+#if (defined(CONFIG_BF_REV_0_5))
+#define ANOMALY_05000254 /* Incorrect Timer Pulse Width in Single-Shot PWM_OUT
+ mode with external clock */
+#define ANOMALY_05000266 /* IMDMA destination IRQ status must be read prior to
+ using IMDMA */
+#endif
+
+#if (defined(CONFIG_BF_REV_0_3))
+#define ANOMALY_05000156 /* Timers in PWM-Out Mode with PPI GP Receive (Input)
+ Mode with 0 Frame Syncs */
+#define ANOMALY_05000168 /* SDRAM auto-refresh and subsequent Power Ups */
+#define ANOMALY_05000169 /* DATA CPLB page miss can result in lost write-through
+ cache data writes */
+#define ANOMALY_05000171 /* Boot-ROM code modifies SICA_IWRx wakeup registers */
+#define ANOMALY_05000174 /* Cache Fill Buffer Data lost */
+#define ANOMALY_05000175 /* Overlapping Sequencer and Memory Stalls */
+#define ANOMALY_05000176 /* Multiplication of (-1) by (-1) followed by an
+ accumulator saturation */
+#define ANOMALY_05000179 /* PPI_COUNT cannot be programmed to 0 in General
+ Purpose TX or RX modes */
+#define ANOMALY_05000181 /* Disabling the PPI resets the PPI configuration
+ registers */
+#define ANOMALY_05000184 /* Timer Pin limitations for PPI TX Modes with
+ External Frame Syncs */
+#define ANOMALY_05000185 /* PPI TX Mode with 2 External Frame Syncs */
+#define ANOMALY_05000186 /* PPI packing with Data Length greater than 8 bits
+ (not a meaningful mode) */
+#define ANOMALY_05000188 /* IMDMA Restrictions on Descriptor and Buffer
+ Placement in Memory */
+#define ANOMALY_05000189 /* False Protection Exception */
+#define ANOMALY_05000193 /* False Flag Pin Interrupts on Edge Sensitive Inputs
+ when polarity setting is changed */
+#define ANOMALY_05000194 /* Restarting SPORT in specific modes may cause data
+ corruption */
+#define ANOMALY_05000198 /* Failing MMR accesses when stalled by preceding
+ memory read */
+#define ANOMALY_05000199 /* DMA current address shows wrong value during carry
+ fix */
+#define ANOMALY_05000200 /* SPORT TFS and DT are incorrectly driven during
+ inactive channels in certain conditions */
+#define ANOMALY_05000202 /* Possible infinite stall with specific dual-DAG
+ situation */
+#define ANOMALY_05000204 /* Incorrect data read with write-through cache and
+ allocate cache lines on reads only mode */
+#define ANOMALY_05000205 /* Specific sequence that can cause DMA error or DMA
+ stopping */
+#define ANOMALY_05000207 /* Recovery from "brown-out" condition */
+#define ANOMALY_05000209 /* Speed-Path in computational unit affects certain
+ instructions */
+#define ANOMALY_05000215 /* UART TX Interrupt masked erroneously */
+#define ANOMALY_05000219 /* NMI event at boot time results in unpredictable
+ state */
+#define ANOMALY_05000220 /* Data Corruption with Cached External Memory and
+ Non-Cached On-Chip L2 Memory */
+#define ANOMALY_05000225 /* Incorrect pulse-width of UART start-bit */
+#define ANOMALY_05000227 /* Scratchpad memory bank reads may return incorrect
+ data */
+#define ANOMALY_05000230 /* UART Receiver is less robust against Baudrate
+ Differences in certain Conditions */
+#define ANOMALY_05000231 /* UART STB bit incorrectly affects receiver setting */
+#define ANOMALY_05000232 /* SPORT data transmit lines are incorrectly driven in
+ multichannel mode */
+#define ANOMALY_05000242 /* DF bit in PLL_CTL register does not respond to
+ hardware reset */
+#define ANOMALY_05000244 /* If i-cache is on, CSYNC/SSYNC/IDLE around Change of
+ Control causes failures */
+#define ANOMALY_05000248 /* TESTSET operation forces stall on the other core */
+#define ANOMALY_05000250 /* Incorrect Bit-Shift of Data Word in Multichannel
+ (TDM) mode in certain conditions */
+#define ANOMALY_05000251 /* Exception not generated for MMR accesses in
+ reserved region */
+#define ANOMALY_05000253 /* Maximum external clock speed for Timers */
+#define ANOMALY_05000258 /* Instruction Cache is corrupted when bits 9 and 12
+ of the ICPLB Data registers differ */
+#define ANOMALY_05000260 /* ICPLB_STATUS MMR register may be corrupted */
+#define ANOMALY_05000261 /* DCPLB_FAULT_ADDR MMR register may be corrupted */
+#define ANOMALY_05000262 /* Stores to data cache may be lost */
+#define ANOMALY_05000263 /* Hardware loop corrupted when taking an ICPLB
+ exception */
+#define ANOMALY_05000264 /* CSYNC/SSYNC/IDLE causes infinite stall in second
+ to last instruction in hardware loop */
+#define ANOMALY_05000276 /* Timing requirements change for External Frame
+ Sync PPI Modes with non-zero PPI_DELAY */
+#define ANOMALY_05000278 /* Disabling Peripherals with DMA running may cause
+ DMA system instability */
+#define ANOMALY_05000281 /* False Hardware Error Exception when ISR context is
+ not restored */
+#define ANOMALY_05000283 /* An MMR write is stalled indefinitely when killed
+ in a particular stage */
+#define ANOMALY_05000287 /* A read will receive incorrect data under certain
+ conditions */
+#define ANOMALY_05000288 /* SPORTs may receive bad data if FIFOs fill up */
+#endif
+
+#endif /* _MACH_ANOMALY_H_ */
diff --git a/include/asm-blackfin/mach-bf561/bf561.h b/include/asm-blackfin/mach-bf561/bf561.h
new file mode 100644
index 0000000..96a5d3a
--- /dev/null
+++ b/include/asm-blackfin/mach-bf561/bf561.h
@@ -0,0 +1,408 @@
+/*
+ * File: include/asm-blackfin/mach-bf561/bf561.h
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description: SYSTEM MMR REGISTER AND MEMORY MAP FOR ADSP-BF561
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef __MACH_BF561_H__
+#define __MACH_BF561_H__
+
+#define SUPPORTED_REVID 0x3
+
+#define OFFSET_(x) ((x) & 0x0000FFFF)
+#define L1_ISRAM 0xFFA00000
+#define L1_ISRAM_END 0xFFA04000
+#define DATA_BANKA_SRAM 0xFF800000
+#define DATA_BANKA_SRAM_END 0xFF804000
+#define DATA_BANKB_SRAM 0xFF900000
+#define DATA_BANKB_SRAM_END 0xFF904000
+#define L1_DSRAMA 0xFF800000
+#define L1_DSRAMA_END 0xFF804000
+#define L1_DSRAMB 0xFF900000
+#define L1_DSRAMB_END 0xFF904000
+#define L2_SRAM 0xFEB00000
+#define L2_SRAM_END 0xFEB20000
+#define AMB_FLASH 0x20000000
+#define AMB_FLASH_END 0x21000000
+#define AMB_FLASH_LENGTH 0x01000000
+#define L1_ISRAM_LENGTH 0x4000
+#define L1_DSRAMA_LENGTH 0x4000
+#define L1_DSRAMB_LENGTH 0x4000
+#define L2_SRAM_LENGTH 0x20000
+
+/*some misc defines*/
+#define IMASK_IVG15 0x8000
+#define IMASK_IVG14 0x4000
+#define IMASK_IVG13 0x2000
+#define IMASK_IVG12 0x1000
+
+#define IMASK_IVG11 0x0800
+#define IMASK_IVG10 0x0400
+#define IMASK_IVG9 0x0200
+#define IMASK_IVG8 0x0100
+
+#define IMASK_IVG7 0x0080
+#define IMASK_IVGTMR 0x0040
+#define IMASK_IVGHW 0x0020
+
+/***************************
+ * Blackfin Cache setup
+ */
+
+
+#define BLKFIN_ISUBBANKS 4
+#define BLKFIN_IWAYS 4
+#define BLKFIN_ILINES 32
+
+#define BLKFIN_DSUBBANKS 4
+#define BLKFIN_DWAYS 2
+#define BLKFIN_DLINES 64
+
+#define WAY0_L 0x1
+#define WAY1_L 0x2
+#define WAY01_L 0x3
+#define WAY2_L 0x4
+#define WAY02_L 0x5
+#define WAY12_L 0x6
+#define WAY012_L 0x7
+
+#define WAY3_L 0x8
+#define WAY03_L 0x9
+#define WAY13_L 0xA
+#define WAY013_L 0xB
+
+#define WAY32_L 0xC
+#define WAY320_L 0xD
+#define WAY321_L 0xE
+#define WAYALL_L 0xF
+
+#define DMC_ENABLE (2<<2) /*yes, 2, not 1 */
+
+/* IAR0 BIT FIELDS */
+#define PLL_WAKEUP_BIT 0xFFFFFFFF
+#define DMA1_ERROR_BIT 0xFFFFFF0F
+#define DMA2_ERROR_BIT 0xFFFFF0FF
+#define IMDMA_ERROR_BIT 0xFFFF0FFF
+#define PPI1_ERROR_BIT 0xFFF0FFFF
+#define PPI2_ERROR_BIT 0xFF0FFFFF
+#define SPORT0_ERROR_BIT 0xF0FFFFFF
+#define SPORT1_ERROR_BIT 0x0FFFFFFF
+/* IAR1 BIT FIELDS */
+#define SPI_ERROR_BIT 0xFFFFFFFF
+#define UART_ERROR_BIT 0xFFFFFF0F
+#define RESERVED_ERROR_BIT 0xFFFFF0FF
+#define DMA1_0_BIT 0xFFFF0FFF
+#define DMA1_1_BIT 0xFFF0FFFF
+#define DMA1_2_BIT 0xFF0FFFFF
+#define DMA1_3_BIT 0xF0FFFFFF
+#define DMA1_4_BIT 0x0FFFFFFF
+/* IAR2 BIT FIELDS */
+#define DMA1_5_BIT 0xFFFFFFFF
+#define DMA1_6_BIT 0xFFFFFF0F
+#define DMA1_7_BIT 0xFFFFF0FF
+#define DMA1_8_BIT 0xFFFF0FFF
+#define DMA1_9_BIT 0xFFF0FFFF
+#define DMA1_10_BIT 0xFF0FFFFF
+#define DMA1_11_BIT 0xF0FFFFFF
+#define DMA2_0_BIT 0x0FFFFFFF
+/* IAR3 BIT FIELDS */
+#define DMA2_1_BIT 0xFFFFFFFF
+#define DMA2_2_BIT 0xFFFFFF0F
+#define DMA2_3_BIT 0xFFFFF0FF
+#define DMA2_4_BIT 0xFFFF0FFF
+#define DMA2_5_BIT 0xFFF0FFFF
+#define DMA2_6_BIT 0xFF0FFFFF
+#define DMA2_7_BIT 0xF0FFFFFF
+#define DMA2_8_BIT 0x0FFFFFFF
+/* IAR4 BIT FIELDS */
+#define DMA2_9_BIT 0xFFFFFFFF
+#define DMA2_10_BIT 0xFFFFFF0F
+#define DMA2_11_BIT 0xFFFFF0FF
+#define TIMER0_BIT 0xFFFF0FFF
+#define TIMER1_BIT 0xFFF0FFFF
+#define TIMER2_BIT 0xFF0FFFFF
+#define TIMER3_BIT 0xF0FFFFFF
+#define TIMER4_BIT 0x0FFFFFFF
+/* IAR5 BIT FIELDS */
+#define TIMER5_BIT 0xFFFFFFFF
+#define TIMER6_BIT 0xFFFFFF0F
+#define TIMER7_BIT 0xFFFFF0FF
+#define TIMER8_BIT 0xFFFF0FFF
+#define TIMER9_BIT 0xFFF0FFFF
+#define TIMER10_BIT 0xFF0FFFFF
+#define TIMER11_BIT 0xF0FFFFFF
+#define PROG0_INTA_BIT 0x0FFFFFFF
+/* IAR6 BIT FIELDS */
+#define PROG0_INTB_BIT 0xFFFFFFFF
+#define PROG1_INTA_BIT 0xFFFFFF0F
+#define PROG1_INTB_BIT 0xFFFFF0FF
+#define PROG2_INTA_BIT 0xFFFF0FFF
+#define PROG2_INTB_BIT 0xFFF0FFFF
+#define DMA1_WRRD0_BIT 0xFF0FFFFF
+#define DMA1_WRRD1_BIT 0xF0FFFFFF
+#define DMA2_WRRD0_BIT 0x0FFFFFFF
+/* IAR7 BIT FIELDS */
+#define DMA2_WRRD1_BIT 0xFFFFFFFF
+#define IMDMA_WRRD0_BIT 0xFFFFFF0F
+#define IMDMA_WRRD1_BIT 0xFFFFF0FF
+#define WATCH_BIT 0xFFFF0FFF
+#define RESERVED_1_BIT 0xFFF0FFFF
+#define RESERVED_2_BIT 0xFF0FFFFF
+#define SUPPLE_0_BIT 0xF0FFFFFF
+#define SUPPLE_1_BIT 0x0FFFFFFF
+
+/* Miscellaneous Values */
+
+/****************************** EBIU Settings ********************************/
+#define AMBCTL0VAL ((CONFIG_BANK_1 << 16) | CONFIG_BANK_0)
+#define AMBCTL1VAL ((CONFIG_BANK_3 << 16) | CONFIG_BANK_2)
+
+#if defined(CONFIG_C_AMBEN_ALL)
+#define V_AMBEN AMBEN_ALL
+#elif defined(CONFIG_C_AMBEN)
+#define V_AMBEN 0x0
+#elif defined(CONFIG_C_AMBEN_B0)
+#define V_AMBEN AMBEN_B0
+#elif defined(CONFIG_C_AMBEN_B0_B1)
+#define V_AMBEN AMBEN_B0_B1
+#elif defined(CONFIG_C_AMBEN_B0_B1_B2)
+#define V_AMBEN AMBEN_B0_B1_B2
+#endif
+
+#ifdef CONFIG_C_AMCKEN
+#define V_AMCKEN AMCKEN
+#else
+#define V_AMCKEN 0x0
+#endif
+
+#ifdef CONFIG_C_B0PEN
+#define V_B0PEN 0x10
+#else
+#define V_B0PEN 0x00
+#endif
+
+#ifdef CONFIG_C_B1PEN
+#define V_B1PEN 0x20
+#else
+#define V_B1PEN 0x00
+#endif
+
+#ifdef CONFIG_C_B2PEN
+#define V_B2PEN 0x40
+#else
+#define V_B2PEN 0x00
+#endif
+
+#ifdef CONFIG_C_B3PEN
+#define V_B3PEN 0x80
+#else
+#define V_B3PEN 0x00
+#endif
+
+#ifdef CONFIG_C_CDPRIO
+#define V_CDPRIO 0x100
+#else
+#define V_CDPRIO 0x0
+#endif
+
+#define AMGCTLVAL (V_AMBEN | V_AMCKEN | V_CDPRIO | V_B0PEN | V_B1PEN | V_B2PEN | V_B3PEN | 0x0002)
+
+#define MAX_VC 600000000
+#define MIN_VC 50000000
+
+/******************************* PLL Settings ********************************/
+#ifdef CONFIG_BFIN_KERNEL_CLOCK
+#if (CONFIG_VCO_MULT < 0)
+#error "VCO Multiplier is less than 0. Please select a different value"
+#endif
+
+#if (CONFIG_VCO_MULT == 0)
+#error "VCO Multiplier should be greater than 0. Please select a different value"
+#endif
+
+#ifndef CONFIG_CLKIN_HALF
+#define CONFIG_VCO_HZ (CONFIG_CLKIN_HZ * CONFIG_VCO_MULT)
+#else
+#define CONFIG_VCO_HZ ((CONFIG_CLKIN_HZ * CONFIG_VCO_MULT)/2)
+#endif
+
+#ifndef CONFIG_PLL_BYPASS
+#define CONFIG_CCLK_HZ (CONFIG_VCO_HZ/CONFIG_CCLK_DIV)
+#define CONFIG_SCLK_HZ (CONFIG_VCO_HZ/CONFIG_SCLK_DIV)
+#else
+#define CONFIG_CCLK_HZ CONFIG_CLKIN_HZ
+#define CONFIG_SCLK_HZ CONFIG_CLKIN_HZ
+#endif
+
+#if (CONFIG_SCLK_DIV < 1)
+#error "SCLK DIV cannot be less than 1 or more than 15. Please select a proper value"
+#endif
+
+#if (CONFIG_SCLK_DIV > 15)
+#error "SCLK DIV cannot be less than 1 or more than 15. Please select a proper value"
+#endif
+
+#if (CONFIG_CCLK_DIV != 1)
+#if (CONFIG_CCLK_DIV != 2)
+#if (CONFIG_CCLK_DIV != 4)
+#if (CONFIG_CCLK_DIV != 8)
+#error "CCLK DIV can be 1,2,4 or 8 only. Please select a proper value"
+#endif
+#endif
+#endif
+#endif
+
+#if (CONFIG_VCO_HZ > MAX_VC)
+#error "VCO selected is more than maximum value. Please change the VCO multipler"
+#endif
+
+#if (CONFIG_SCLK_HZ > 133000000)
+#error "Sclk value selected is more than maximum. Please select a proper value for SCLK multiplier"
+#endif
+
+#if (CONFIG_SCLK_HZ < 27000000)
+#error "Sclk value selected is less than minimum. Please select a proper value for SCLK multiplier"
+#endif
+
+#if (CONFIG_SCLK_HZ >= CONFIG_CCLK_HZ)
+#if (CONFIG_SCLK_HZ != CONFIG_CLKIN_HZ)
+#if (CONFIG_CCLK_HZ != CONFIG_CLKIN_HZ)
+#error "Please select sclk less than cclk"
+#endif
+#endif
+#endif
+
+#if (CONFIG_CCLK_DIV == 1)
+#define CONFIG_CCLK_ACT_DIV CCLK_DIV1
+#endif
+#if (CONFIG_CCLK_DIV == 2)
+#define CONFIG_CCLK_ACT_DIV CCLK_DIV2
+#endif
+#if (CONFIG_CCLK_DIV == 4)
+#define CONFIG_CCLK_ACT_DIV CCLK_DIV4
+#endif
+#if (CONFIG_CCLK_DIV == 8)
+#define CONFIG_CCLK_ACT_DIV CCLK_DIV8
+#endif
+#ifndef CONFIG_CCLK_ACT_DIV
+#define CONFIG_CCLK_ACT_DIV CONFIG_CCLK_DIV_not_defined_properly
+#endif
+
+#if defined(ANOMALY_05000273) && (CONFIG_CCLK_DIV == 1)
+#error ANOMALY 05000273, please make sure CCLK is at least 2x SCLK
+#endif
+
+#endif /* CONFIG_BFIN_KERNEL_CLOCK */
+
+#ifdef CONFIG_BF561
+#define CPU "BF561"
+#define CPUID 0x027bb000
+#endif
+#ifndef CPU
+#define CPU "UNKNOWN"
+#define CPUID 0x0
+#endif
+
+#if (CONFIG_MEM_SIZE % 4)
+#error "SDRAM memory size must be a multiple of 4MB!"
+#endif
+#define SDRAM_IGENERIC (CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID | CPLB_PORTPRIO)
+#define SDRAM_IKERNEL (SDRAM_IGENERIC | CPLB_LOCK)
+#define L1_IMEMORY ( CPLB_USER_RD | CPLB_VALID | CPLB_LOCK)
+#define SDRAM_INON_CHBL ( CPLB_USER_RD | CPLB_VALID)
+
+/*Use the menuconfig cache policy here - CONFIG_BLKFIN_WT/CONFIG_BLKFIN_WB*/
+
+#define ANOMALY_05000158_WORKAROUND 0x200
+#ifdef CONFIG_BLKFIN_WB /*Write Back Policy */
+#define SDRAM_DGENERIC (CPLB_L1_CHBL | CPLB_DIRTY \
+ | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND)
+#else /*Write Through */
+#define SDRAM_DGENERIC (CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW | CPLB_DIRTY \
+ | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND)
+#endif
+
+
+#define L1_DMEMORY (CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_LOCK | CPLB_DIRTY)
+#define SDRAM_DNON_CHBL (CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_DIRTY)
+#define SDRAM_EBIU (CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_DIRTY)
+#define SDRAM_OOPS (CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_LOCK | CPLB_DIRTY)
+
+#define L2_MEMORY (CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_DIRTY)
+
+#define SIZE_1K 0x00000400 /* 1K */
+#define SIZE_4K 0x00001000 /* 4K */
+#define SIZE_1M 0x00100000 /* 1M */
+#define SIZE_4M 0x00400000 /* 4M */
+
+#define MAX_CPLBS (16 * 2)
+
+/*
+* Number of required data CPLB switchtable entries
+* MEMSIZE / 4 (we mostly install 4M page size CPLBs
+* approx 16 for smaller 1MB page size CPLBs for allignment purposes
+* 1 for L1 Data Memory
+* 1 for L2 Data Memory
+* 1 for CONFIG_DEBUG_HUNT_FOR_ZERO
+* 64 for ASYNC Memory
+*/
+
+
+#define MAX_SWITCH_D_CPLBS (((CONFIG_MEM_SIZE / 4) + 16 + 1 + 1 + 1 + 64) * 2)
+
+/*
+* Number of required instruction CPLB switchtable entries
+* MEMSIZE / 4 (we mostly install 4M page size CPLBs
+* approx 12 for smaller 1MB page size CPLBs for allignment purposes
+* 1 for L1 Instruction Memory
+* 1 for L2 Instruction Memory
+* 1 for CONFIG_DEBUG_HUNT_FOR_ZERO
+*/
+
+#define MAX_SWITCH_I_CPLBS (((CONFIG_MEM_SIZE / 4) + 12 + 1 + 1 + 1) * 2)
+
+#if 0 /* comment by mhfan */
+/* Event Vector Table Address */
+#define EVT_EMULATION_ADDR 0xffe02000
+#define EVT_RESET_ADDR 0xffe02004
+#define EVT_NMI_ADDR 0xffe02008
+#define EVT_EXCEPTION_ADDR 0xffe0200c
+#define EVT_GLOBAL_INT_ENB_ADDR 0xffe02010
+#define EVT_HARDWARE_ERROR_ADDR 0xffe02014
+#define EVT_TIMER_ADDR 0xffe02018
+#define EVT_IVG7_ADDR 0xffe0201c
+#define EVT_IVG8_ADDR 0xffe02020
+#define EVT_IVG9_ADDR 0xffe02024
+#define EVT_IVG10_ADDR 0xffe02028
+#define EVT_IVG11_ADDR 0xffe0202c
+#define EVT_IVG12_ADDR 0xffe02030
+#define EVT_IVG13_ADDR 0xffe02034
+#define EVT_IVG14_ADDR 0xffe02038
+#define EVT_IVG15_ADDR 0xffe0203c
+#define EVT_OVERRIDE_ADDR 0xffe02100
+#endif /* comment by mhfan */
+
+#endif /* __MACH_BF561_H__ */
diff --git a/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h
new file mode 100644
index 0000000..23bf76a
--- /dev/null
+++ b/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h
@@ -0,0 +1,108 @@
+#include <linux/serial.h>
+#include <asm/dma.h>
+
+#define NR_PORTS 1
+
+#define OFFSET_THR 0x00 /* Transmit Holding register */
+#define OFFSET_RBR 0x00 /* Receive Buffer register */
+#define OFFSET_DLL 0x00 /* Divisor Latch (Low-Byte) */
+#define OFFSET_IER 0x04 /* Interrupt Enable Register */
+#define OFFSET_DLH 0x04 /* Divisor Latch (High-Byte) */
+#define OFFSET_IIR 0x08 /* Interrupt Identification Register */
+#define OFFSET_LCR 0x0C /* Line Control Register */
+#define OFFSET_MCR 0x10 /* Modem Control Register */
+#define OFFSET_LSR 0x14 /* Line Status Register */
+#define OFFSET_MSR 0x18 /* Modem Status Register */
+#define OFFSET_SCR 0x1C /* SCR Scratch Register */
+#define OFFSET_GCTL 0x24 /* Global Control Register */
+
+#define UART_GET_CHAR(uart) bfin_read16(((uart)->port.membase + OFFSET_RBR))
+#define UART_GET_DLL(uart) bfin_read16(((uart)->port.membase + OFFSET_DLL))
+#define UART_GET_IER(uart) bfin_read16(((uart)->port.membase + OFFSET_IER))
+#define UART_GET_DLH(uart) bfin_read16(((uart)->port.membase + OFFSET_DLH))
+#define UART_GET_IIR(uart) bfin_read16(((uart)->port.membase + OFFSET_IIR))
+#define UART_GET_LCR(uart) bfin_read16(((uart)->port.membase + OFFSET_LCR))
+#define UART_GET_LSR(uart) bfin_read16(((uart)->port.membase + OFFSET_LSR))
+#define UART_GET_GCTL(uart) bfin_read16(((uart)->port.membase + OFFSET_GCTL))
+
+#define UART_PUT_CHAR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_THR),v)
+#define UART_PUT_DLL(uart,v) bfin_write16(((uart)->port.membase + OFFSET_DLL),v)
+#define UART_PUT_IER(uart,v) bfin_write16(((uart)->port.membase + OFFSET_IER),v)
+#define UART_PUT_DLH(uart,v) bfin_write16(((uart)->port.membase + OFFSET_DLH),v)
+#define UART_PUT_LCR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_LCR),v)
+#define UART_PUT_GCTL(uart,v) bfin_write16(((uart)->port.membase + OFFSET_GCTL),v)
+
+#ifdef CONFIG_BFIN_UART0_CTSRTS
+# define CONFIG_SERIAL_BFIN_CTSRTS
+# ifndef CONFIG_UART0_CTS_PIN
+# define CONFIG_UART0_CTS_PIN -1
+# endif
+# ifndef CONFIG_UART0_RTS_PIN
+# define CONFIG_UART0_RTS_PIN -1
+# endif
+#endif
+
+struct bfin_serial_port {
+ struct uart_port port;
+ unsigned int old_status;
+#ifdef CONFIG_SERIAL_BFIN_DMA
+ int tx_done;
+ int tx_count;
+ struct circ_buf rx_dma_buf;
+ struct timer_list rx_dma_timer;
+ int rx_dma_nrows;
+ unsigned int tx_dma_channel;
+ unsigned int rx_dma_channel;
+ struct work_struct tx_dma_workqueue;
+#else
+ struct work_struct cts_workqueue;
+#endif
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
+ int cts_pin;
+ int rts_pin;
+#endif
+};
+
+struct bfin_serial_port bfin_serial_ports[NR_PORTS];
+struct bfin_serial_res {
+ unsigned long uart_base_addr;
+ int uart_irq;
+#ifdef CONFIG_SERIAL_BFIN_DMA
+ unsigned int uart_tx_dma_channel;
+ unsigned int uart_rx_dma_channel;
+#endif
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
+ int uart_cts_pin;
+ int uart_rts_pin;
+#endif
+};
+
+struct bfin_serial_res bfin_serial_resource[] = {
+ 0xFFC00400,
+ IRQ_UART_RX,
+#ifdef CONFIG_SERIAL_BFIN_DMA
+ CH_UART_TX,
+ CH_UART_RX,
+#endif
+#ifdef CONFIG_BFIN_UART0_CTSRTS
+ CONFIG_UART0_CTS_PIN,
+ CONFIG_UART0_RTS_PIN,
+#endif
+};
+
+
+int nr_ports = NR_PORTS;
+static void bfin_serial_hw_init(struct bfin_serial_port *uart)
+{
+
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
+ if (uart->cts_pin >= 0) {
+ gpio_request(uart->cts_pin, NULL);
+ gpio_direction_input(uart->cts_pin);
+ }
+ if (uart->rts_pin >= 0) {
+ gpio_request(uart->rts_pin, NULL);
+ gpio_direction_input(uart->rts_pin);
+ }
+#endif
+}
diff --git a/include/asm-blackfin/mach-bf561/blackfin.h b/include/asm-blackfin/mach-bf561/blackfin.h
new file mode 100644
index 0000000..2537c84
--- /dev/null
+++ b/include/asm-blackfin/mach-bf561/blackfin.h
@@ -0,0 +1,52 @@
+/*
+ * File: include/asm-blackfin/mach-bf561/blackfin.h
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Rev:
+ *
+ * Modified:
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.
+ * If not, write to the Free Software Foundation,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef _MACH_BLACKFIN_H_
+#define _MACH_BLACKFIN_H_
+
+#define BF561_FAMILY
+
+#include "bf561.h"
+#include "mem_map.h"
+#include "defBF561.h"
+#include "anomaly.h"
+
+#if !(defined(__ASSEMBLY__) || defined(ASSEMBLY))
+#include "cdefBF561.h"
+#endif
+
+#define bfin_read_FIO_FLAG_D() bfin_read_FIO0_FLAG_D()
+#define bfin_write_FIO_FLAG_D(val) bfin_write_FIO0_FLAG_D(val)
+#define bfin_read_FIO_DIR() bfin_read_FIO0_DIR()
+#define bfin_write_FIO_DIR(val) bfin_write_FIO0_DIR(val)
+#define bfin_read_FIO_INEN() bfin_read_FIO0_INEN()
+#define bfin_write_FIO_INEN(val) bfin_write_FIO0_INEN(val)
+
+#endif /* _MACH_BLACKFIN_H_ */
diff --git a/include/asm-blackfin/mach-bf561/cdefBF561.h b/include/asm-blackfin/mach-bf561/cdefBF561.h
new file mode 100644
index 0000000..5dc0ed8
--- /dev/null
+++ b/include/asm-blackfin/mach-bf561/cdefBF561.h
@@ -0,0 +1,1543 @@
+/*
+ * File: include/asm-blackfin/mach-bf561/cdefBF561.h
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description: C POINTERS TO SYSTEM MMR REGISTER AND MEMORY MAP FOR ADSP-BF561
+ *
+ * Rev:
+ *
+ * Modified:
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.
+ * If not, write to the Free Software Foundation,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef _CDEF_BF561_H
+#define _CDEF_BF561_H
+
+/*
+#if !defined(__ADSPBF561__)
+#warning cdefBF561.h should only be included for BF561 chip.
+#endif
+*/
+/* include all Core registers and bit definitions */
+#include "defBF561.h"
+
+/*include core specific register pointer definitions*/
+#include <asm/mach-common/cdef_LPBlackfin.h>
+
+#include <asm/system.h>
+
+/*********************************************************************************** */
+/* System MMR Register Map */
+/*********************************************************************************** */
+
+/* Clock and System Control (0xFFC00000 - 0xFFC000FF) */
+#define bfin_read_PLL_CTL() bfin_read16(PLL_CTL)
+#define bfin_write_PLL_CTL(val) bfin_write16(PLL_CTL,val)
+#define bfin_read_PLL_DIV() bfin_read16(PLL_DIV)
+#define bfin_write_PLL_DIV(val) bfin_write16(PLL_DIV,val)
+#define bfin_read_VR_CTL() bfin_read16(VR_CTL)
+/* Writing to VR_CTL initiates a PLL relock sequence. */
+static __inline__ void bfin_write_VR_CTL(unsigned int val)
+{
+ unsigned long flags, iwr;
+
+ bfin_write16(VR_CTL, val);
+ __builtin_bfin_ssync();
+ /* Enable the PLL Wakeup bit in SIC IWR */
+ iwr = bfin_read32(SICA_IWR0);
+ /* Only allow PPL Wakeup) */
+ bfin_write32(SICA_IWR0, IWR_ENABLE(0));
+ local_irq_save(flags);
+ asm("IDLE;");
+ local_irq_restore(flags);
+ bfin_write32(SICA_IWR0, iwr);
+}
+#define bfin_read_PLL_STAT() bfin_read16(PLL_STAT)
+#define bfin_write_PLL_STAT(val) bfin_write16(PLL_STAT,val)
+#define bfin_read_PLL_LOCKCNT() bfin_read16(PLL_LOCKCNT)
+#define bfin_write_PLL_LOCKCNT(val) bfin_write16(PLL_LOCKCNT,val)
+#define bfin_read_CHIPID() bfin_read32(CHIPID)
+
+/* System Reset and Interrupt Controller registers for core A (0xFFC0 0100-0xFFC0 01FF) */
+#define bfin_read_SICA_SWRST() bfin_read16(SICA_SWRST)
+#define bfin_write_SICA_SWRST(val) bfin_write16(SICA_SWRST,val)
+#define bfin_read_SICA_SYSCR() bfin_read16(SICA_SYSCR)
+#define bfin_write_SICA_SYSCR(val) bfin_write16(SICA_SYSCR,val)
+#define bfin_read_SICA_RVECT() bfin_read16(SICA_RVECT)
+#define bfin_write_SICA_RVECT(val) bfin_write16(SICA_RVECT,val)
+#define bfin_read_SICA_IMASK() bfin_read32(SICA_IMASK)
+#define bfin_write_SICA_IMASK(val) bfin_write32(SICA_IMASK,val)
+#define bfin_read_SICA_IMASK0() bfin_read32(SICA_IMASK0)
+#define bfin_write_SICA_IMASK0(val) bfin_write32(SICA_IMASK0,val)
+#define bfin_read_SICA_IMASK1() bfin_read32(SICA_IMASK1)
+#define bfin_write_SICA_IMASK1(val) bfin_write32(SICA_IMASK1,val)
+#define bfin_read_SICA_IAR0() bfin_read32(SICA_IAR0)
+#define bfin_write_SICA_IAR0(val) bfin_write32(SICA_IAR0,val)
+#define bfin_read_SICA_IAR1() bfin_read32(SICA_IAR1)
+#define bfin_write_SICA_IAR1(val) bfin_write32(SICA_IAR1,val)
+#define bfin_read_SICA_IAR2() bfin_read32(SICA_IAR2)
+#define bfin_write_SICA_IAR2(val) bfin_write32(SICA_IAR2,val)
+#define bfin_read_SICA_IAR3() bfin_read32(SICA_IAR3)
+#define bfin_write_SICA_IAR3(val) bfin_write32(SICA_IAR3,val)
+#define bfin_read_SICA_IAR4() bfin_read32(SICA_IAR4)
+#define bfin_write_SICA_IAR4(val) bfin_write32(SICA_IAR4,val)
+#define bfin_read_SICA_IAR5() bfin_read32(SICA_IAR5)
+#define bfin_write_SICA_IAR5(val) bfin_write32(SICA_IAR5,val)
+#define bfin_read_SICA_IAR6() bfin_read32(SICA_IAR6)
+#define bfin_write_SICA_IAR6(val) bfin_write32(SICA_IAR6,val)
+#define bfin_read_SICA_IAR7() bfin_read32(SICA_IAR7)
+#define bfin_write_SICA_IAR7(val) bfin_write32(SICA_IAR7,val)
+#define bfin_read_SICA_ISR0() bfin_read32(SICA_ISR0)
+#define bfin_write_SICA_ISR0(val) bfin_write32(SICA_ISR0,val)
+#define bfin_read_SICA_ISR1() bfin_read32(SICA_ISR1)
+#define bfin_write_SICA_ISR1(val) bfin_write32(SICA_ISR1,val)
+#define bfin_read_SICA_IWR0() bfin_read32(SICA_IWR0)
+#define bfin_write_SICA_IWR0(val) bfin_write32(SICA_IWR0,val)
+#define bfin_read_SICA_IWR1() bfin_read32(SICA_IWR1)
+#define bfin_write_SICA_IWR1(val) bfin_write32(SICA_IWR1,val)
+
+/* System Reset and Interrupt Controller registers for Core B (0xFFC0 1100-0xFFC0 11FF) */
+#define bfin_read_SICB_SWRST() bfin_read16(SICB_SWRST)
+#define bfin_write_SICB_SWRST(val) bfin_write16(SICB_SWRST,val)
+#define bfin_read_SICB_SYSCR() bfin_read16(SICB_SYSCR)
+#define bfin_write_SICB_SYSCR(val) bfin_write16(SICB_SYSCR,val)
+#define bfin_read_SICB_RVECT() bfin_read16(SICB_RVECT)
+#define bfin_write_SICB_RVECT(val) bfin_write16(SICB_RVECT,val)
+#define bfin_read_SICB_IMASK0() bfin_read32(SICB_IMASK0)
+#define bfin_write_SICB_IMASK0(val) bfin_write32(SICB_IMASK0,val)
+#define bfin_read_SICB_IMASK1() bfin_read32(SICB_IMASK1)
+#define bfin_write_SICB_IMASK1(val) bfin_write32(SICB_IMASK1,val)
+#define bfin_read_SICB_IAR0() bfin_read32(SICB_IAR0)
+#define bfin_write_SICB_IAR0(val) bfin_write32(SICB_IAR0,val)
+#define bfin_read_SICB_IAR1() bfin_read32(SICB_IAR1)
+#define bfin_write_SICB_IAR1(val) bfin_write32(SICB_IAR1,val)
+#define bfin_read_SICB_IAR2() bfin_read32(SICB_IAR2)
+#define bfin_write_SICB_IAR2(val) bfin_write32(SICB_IAR2,val)
+#define bfin_read_SICB_IAR3() bfin_read32(SICB_IAR3)
+#define bfin_write_SICB_IAR3(val) bfin_write32(SICB_IAR3,val)
+#define bfin_read_SICB_IAR4() bfin_read32(SICB_IAR4)
+#define bfin_write_SICB_IAR4(val) bfin_write32(SICB_IAR4,val)
+#define bfin_read_SICB_IAR5() bfin_read32(SICB_IAR5)
+#define bfin_write_SICB_IAR5(val) bfin_write32(SICB_IAR5,val)
+#define bfin_read_SICB_IAR6() bfin_read32(SICB_IAR6)
+#define bfin_write_SICB_IAR6(val) bfin_write32(SICB_IAR6,val)
+#define bfin_read_SICB_IAR7() bfin_read32(SICB_IAR7)
+#define bfin_write_SICB_IAR7(val) bfin_write32(SICB_IAR7,val)
+#define bfin_read_SICB_ISR0() bfin_read32(SICB_ISR0)
+#define bfin_write_SICB_ISR0(val) bfin_write32(SICB_ISR0,val)
+#define bfin_read_SICB_ISR1() bfin_read32(SICB_ISR1)
+#define bfin_write_SICB_ISR1(val) bfin_write32(SICB_ISR1,val)
+#define bfin_read_SICB_IWR0() bfin_read32(SICB_IWR0)
+#define bfin_write_SICB_IWR0(val) bfin_write32(SICB_IWR0,val)
+#define bfin_read_SICB_IWR1() bfin_read32(SICB_IWR1)
+#define bfin_write_SICB_IWR1(val) bfin_write32(SICB_IWR1,val)
+/* Watchdog Timer registers for Core A (0xFFC0 0200-0xFFC0 02FF) */
+#define bfin_read_WDOGA_CTL() bfin_read16(WDOGA_CTL)
+#define bfin_write_WDOGA_CTL(val) bfin_write16(WDOGA_CTL,val)
+#define bfin_read_WDOGA_CNT() bfin_read32(WDOGA_CNT)
+#define bfin_write_WDOGA_CNT(val) bfin_write32(WDOGA_CNT,val)
+#define bfin_read_WDOGA_STAT() bfin_read32(WDOGA_STAT)
+#define bfin_write_WDOGA_STAT(val) bfin_write32(WDOGA_STAT,val)
+
+/* Watchdog Timer registers for Core B (0xFFC0 1200-0xFFC0 12FF) */
+#define bfin_read_WDOGB_CTL() bfin_read16(WDOGB_CTL)
+#define bfin_write_WDOGB_CTL(val) bfin_write16(WDOGB_CTL,val)
+#define bfin_read_WDOGB_CNT() bfin_read32(WDOGB_CNT)
+#define bfin_write_WDOGB_CNT(val) bfin_write32(WDOGB_CNT,val)
+#define bfin_read_WDOGB_STAT() bfin_read32(WDOGB_STAT)
+#define bfin_write_WDOGB_STAT(val) bfin_write32(WDOGB_STAT,val)
+
+/* UART Controller (0xFFC00400 - 0xFFC004FF) */
+#define bfin_read_UART_THR() bfin_read16(UART_THR)
+#define bfin_write_UART_THR(val) bfin_write16(UART_THR,val)
+#define bfin_read_UART_RBR() bfin_read16(UART_RBR)
+#define bfin_write_UART_RBR(val) bfin_write16(UART_RBR,val)
+#define bfin_read_UART_DLL() bfin_read16(UART_DLL)
+#define bfin_write_UART_DLL(val) bfin_write16(UART_DLL,val)
+#define bfin_read_UART_IER() bfin_read16(UART_IER)
+#define bfin_write_UART_IER(val) bfin_write16(UART_IER,val)
+#define bfin_read_UART_DLH() bfin_read16(UART_DLH)
+#define bfin_write_UART_DLH(val) bfin_write16(UART_DLH,val)
+#define bfin_read_UART_IIR() bfin_read16(UART_IIR)
+#define bfin_write_UART_IIR(val) bfin_write16(UART_IIR,val)
+#define bfin_read_UART_LCR() bfin_read16(UART_LCR)
+#define bfin_write_UART_LCR(val) bfin_write16(UART_LCR,val)
+#define bfin_read_UART_MCR() bfin_read16(UART_MCR)
+#define bfin_write_UART_MCR(val) bfin_write16(UART_MCR,val)
+#define bfin_read_UART_LSR() bfin_read16(UART_LSR)
+#define bfin_write_UART_LSR(val) bfin_write16(UART_LSR,val)
+#define bfin_read_UART_MSR() bfin_read16(UART_MSR)
+#define bfin_write_UART_MSR(val) bfin_write16(UART_MSR,val)
+#define bfin_read_UART_SCR() bfin_read16(UART_SCR)
+#define bfin_write_UART_SCR(val) bfin_write16(UART_SCR,val)
+#define bfin_read_UART_GCTL() bfin_read16(UART_GCTL)
+#define bfin_write_UART_GCTL(val) bfin_write16(UART_GCTL,val)
+
+/* SPI Controller (0xFFC00500 - 0xFFC005FF) */
+#define bfin_read_SPI_CTL() bfin_read16(SPI_CTL)
+#define bfin_write_SPI_CTL(val) bfin_write16(SPI_CTL,val)
+#define bfin_read_SPI_FLG() bfin_read16(SPI_FLG)
+#define bfin_write_SPI_FLG(val) bfin_write16(SPI_FLG,val)
+#define bfin_read_SPI_STAT() bfin_read16(SPI_STAT)
+#define bfin_write_SPI_STAT(val) bfin_write16(SPI_STAT,val)
+#define bfin_read_SPI_TDBR() bfin_read16(SPI_TDBR)
+#define bfin_write_SPI_TDBR(val) bfin_write16(SPI_TDBR,val)
+#define bfin_read_SPI_RDBR() bfin_read16(SPI_RDBR)
+#define bfin_write_SPI_RDBR(val) bfin_write16(SPI_RDBR,val)
+#define bfin_read_SPI_BAUD() bfin_read16(SPI_BAUD)
+#define bfin_write_SPI_BAUD(val) bfin_write16(SPI_BAUD,val)
+#define bfin_read_SPI_SHADOW() bfin_read16(SPI_SHADOW)
+#define bfin_write_SPI_SHADOW(val) bfin_write16(SPI_SHADOW,val)
+
+/* Timer 0-7 registers (0xFFC0 0600-0xFFC0 06FF) */
+#define bfin_read_TIMER0_CONFIG() bfin_read16(TIMER0_CONFIG)
+#define bfin_write_TIMER0_CONFIG(val) bfin_write16(TIMER0_CONFIG,val)
+#define bfin_read_TIMER0_COUNTER() bfin_read32(TIMER0_COUNTER)
+#define bfin_write_TIMER0_COUNTER(val) bfin_write32(TIMER0_COUNTER,val)
+#define bfin_read_TIMER0_PERIOD() bfin_read32(TIMER0_PERIOD)
+#define bfin_write_TIMER0_PERIOD(val) bfin_write32(TIMER0_PERIOD,val)
+#define bfin_read_TIMER0_WIDTH() bfin_read32(TIMER0_WIDTH)
+#define bfin_write_TIMER0_WIDTH(val) bfin_write32(TIMER0_WIDTH,val)
+#define bfin_read_TIMER1_CONFIG() bfin_read16(TIMER1_CONFIG)
+#define bfin_write_TIMER1_CONFIG(val) bfin_write16(TIMER1_CONFIG,val)
+#define bfin_read_TIMER1_COUNTER() bfin_read32(TIMER1_COUNTER)
+#define bfin_write_TIMER1_COUNTER(val) bfin_write32(TIMER1_COUNTER,val)
+#define bfin_read_TIMER1_PERIOD() bfin_read32(TIMER1_PERIOD)
+#define bfin_write_TIMER1_PERIOD(val) bfin_write32(TIMER1_PERIOD,val)
+#define bfin_read_TIMER1_WIDTH() bfin_read32(TIMER1_WIDTH)
+#define bfin_write_TIMER1_WIDTH(val) bfin_write32(TIMER1_WIDTH,val)
+#define bfin_read_TIMER2_CONFIG() bfin_read16(TIMER2_CONFIG)
+#define bfin_write_TIMER2_CONFIG(val) bfin_write16(TIMER2_CONFIG,val)
+#define bfin_read_TIMER2_COUNTER() bfin_read32(TIMER2_COUNTER)
+#define bfin_write_TIMER2_COUNTER(val) bfin_write32(TIMER2_COUNTER,val)
+#define bfin_read_TIMER2_PERIOD() bfin_read32(TIMER2_PERIOD)
+#define bfin_write_TIMER2_PERIOD(val) bfin_write32(TIMER2_PERIOD,val)
+#define bfin_read_TIMER2_WIDTH() bfin_read32(TIMER2_WIDTH)
+#define bfin_write_TIMER2_WIDTH(val) bfin_write32(TIMER2_WIDTH,val)
+#define bfin_read_TIMER3_CONFIG() bfin_read16(TIMER3_CONFIG)
+#define bfin_write_TIMER3_CONFIG(val) bfin_write16(TIMER3_CONFIG,val)
+#define bfin_read_TIMER3_COUNTER() bfin_read32(TIMER3_COUNTER)
+#define bfin_write_TIMER3_COUNTER(val) bfin_write32(TIMER3_COUNTER,val)
+#define bfin_read_TIMER3_PERIOD() bfin_read32(TIMER3_PERIOD)
+#define bfin_write_TIMER3_PERIOD(val) bfin_write32(TIMER3_PERIOD,val)
+#define bfin_read_TIMER3_WIDTH() bfin_read32(TIMER3_WIDTH)
+#define bfin_write_TIMER3_WIDTH(val) bfin_write32(TIMER3_WIDTH,val)
+#define bfin_read_TIMER4_CONFIG() bfin_read16(TIMER4_CONFIG)
+#define bfin_write_TIMER4_CONFIG(val) bfin_write16(TIMER4_CONFIG,val)
+#define bfin_read_TIMER4_COUNTER() bfin_read32(TIMER4_COUNTER)
+#define bfin_write_TIMER4_COUNTER(val) bfin_write32(TIMER4_COUNTER,val)
+#define bfin_read_TIMER4_PERIOD() bfin_read32(TIMER4_PERIOD)
+#define bfin_write_TIMER4_PERIOD(val) bfin_write32(TIMER4_PERIOD,val)
+#define bfin_read_TIMER4_WIDTH() bfin_read32(TIMER4_WIDTH)
+#define bfin_write_TIMER4_WIDTH(val) bfin_write32(TIMER4_WIDTH,val)
+#define bfin_read_TIMER5_CONFIG() bfin_read16(TIMER5_CONFIG)
+#define bfin_write_TIMER5_CONFIG(val) bfin_write16(TIMER5_CONFIG,val)
+#define bfin_read_TIMER5_COUNTER() bfin_read32(TIMER5_COUNTER)
+#define bfin_write_TIMER5_COUNTER(val) bfin_write32(TIMER5_COUNTER,val)
+#define bfin_read_TIMER5_PERIOD() bfin_read32(TIMER5_PERIOD)
+#define bfin_write_TIMER5_PERIOD(val) bfin_write32(TIMER5_PERIOD,val)
+#define bfin_read_TIMER5_WIDTH() bfin_read32(TIMER5_WIDTH)
+#define bfin_write_TIMER5_WIDTH(val) bfin_write32(TIMER5_WIDTH,val)
+#define bfin_read_TIMER6_CONFIG() bfin_read16(TIMER6_CONFIG)
+#define bfin_write_TIMER6_CONFIG(val) bfin_write16(TIMER6_CONFIG,val)
+#define bfin_read_TIMER6_COUNTER() bfin_read32(TIMER6_COUNTER)
+#define bfin_write_TIMER6_COUNTER(val) bfin_write32(TIMER6_COUNTER,val)
+#define bfin_read_TIMER6_PERIOD() bfin_read32(TIMER6_PERIOD)
+#define bfin_write_TIMER6_PERIOD(val) bfin_write32(TIMER6_PERIOD,val)
+#define bfin_read_TIMER6_WIDTH() bfin_read32(TIMER6_WIDTH)
+#define bfin_write_TIMER6_WIDTH(val) bfin_write32(TIMER6_WIDTH,val)
+#define bfin_read_TIMER7_CONFIG() bfin_read16(TIMER7_CONFIG)
+#define bfin_write_TIMER7_CONFIG(val) bfin_write16(TIMER7_CONFIG,val)
+#define bfin_read_TIMER7_COUNTER() bfin_read32(TIMER7_COUNTER)
+#define bfin_write_TIMER7_COUNTER(val) bfin_write32(TIMER7_COUNTER,val)
+#define bfin_read_TIMER7_PERIOD() bfin_read32(TIMER7_PERIOD)
+#define bfin_write_TIMER7_PERIOD(val) bfin_write32(TIMER7_PERIOD,val)
+#define bfin_read_TIMER7_WIDTH() bfin_read32(TIMER7_WIDTH)
+#define bfin_write_TIMER7_WIDTH(val) bfin_write32(TIMER7_WIDTH,val)
+
+/* Timer registers 8-11 (0xFFC0 1600-0xFFC0 16FF) */
+#define bfin_read_TMRS8_ENABLE() bfin_read16(TMRS8_ENABLE)
+#define bfin_write_TMRS8_ENABLE(val) bfin_write16(TMRS8_ENABLE,val)
+#define bfin_read_TMRS8_DISABLE() bfin_read16(TMRS8_DISABLE)
+#define bfin_write_TMRS8_DISABLE(val) bfin_write16(TMRS8_DISABLE,val)
+#define bfin_read_TMRS8_STATUS() bfin_read32(TMRS8_STATUS)
+#define bfin_write_TMRS8_STATUS(val) bfin_write32(TMRS8_STATUS,val)
+#define bfin_read_TIMER8_CONFIG() bfin_read16(TIMER8_CONFIG)
+#define bfin_write_TIMER8_CONFIG(val) bfin_write16(TIMER8_CONFIG,val)
+#define bfin_read_TIMER8_COUNTER() bfin_read32(TIMER8_COUNTER)
+#define bfin_write_TIMER8_COUNTER(val) bfin_write32(TIMER8_COUNTER,val)
+#define bfin_read_TIMER8_PERIOD() bfin_read32(TIMER8_PERIOD)
+#define bfin_write_TIMER8_PERIOD(val) bfin_write32(TIMER8_PERIOD,val)
+#define bfin_read_TIMER8_WIDTH() bfin_read32(TIMER8_WIDTH)
+#define bfin_write_TIMER8_WIDTH(val) bfin_write32(TIMER8_WIDTH,val)
+#define bfin_read_TIMER9_CONFIG() bfin_read16(TIMER9_CONFIG)
+#define bfin_write_TIMER9_CONFIG(val) bfin_write16(TIMER9_CONFIG,val)
+#define bfin_read_TIMER9_COUNTER() bfin_read32(TIMER9_COUNTER)
+#define bfin_write_TIMER9_COUNTER(val) bfin_write32(TIMER9_COUNTER,val)
+#define bfin_read_TIMER9_PERIOD() bfin_read32(TIMER9_PERIOD)
+#define bfin_write_TIMER9_PERIOD(val) bfin_write32(TIMER9_PERIOD,val)
+#define bfin_read_TIMER9_WIDTH() bfin_read32(TIMER9_WIDTH)
+#define bfin_write_TIMER9_WIDTH(val) bfin_write32(TIMER9_WIDTH,val)
+#define bfin_read_TIMER10_CONFIG() bfin_read16(TIMER10_CONFIG)
+#define bfin_write_TIMER10_CONFIG(val) bfin_write16(TIMER10_CONFIG,val)
+#define bfin_read_TIMER10_COUNTER() bfin_read32(TIMER10_COUNTER)
+#define bfin_write_TIMER10_COUNTER(val) bfin_write32(TIMER10_COUNTER,val)
+#define bfin_read_TIMER10_PERIOD() bfin_read32(TIMER10_PERIOD)
+#define bfin_write_TIMER10_PERIOD(val) bfin_write32(TIMER10_PERIOD,val)
+#define bfin_read_TIMER10_WIDTH() bfin_read32(TIMER10_WIDTH)
+#define bfin_write_TIMER10_WIDTH(val) bfin_write32(TIMER10_WIDTH,val)
+#define bfin_read_TIMER11_CONFIG() bfin_read16(TIMER11_CONFIG)
+#define bfin_write_TIMER11_CONFIG(val) bfin_write16(TIMER11_CONFIG,val)
+#define bfin_read_TIMER11_COUNTER() bfin_read32(TIMER11_COUNTER)
+#define bfin_write_TIMER11_COUNTER(val) bfin_write32(TIMER11_COUNTER,val)
+#define bfin_read_TIMER11_PERIOD() bfin_read32(TIMER11_PERIOD)
+#define bfin_write_TIMER11_PERIOD(val) bfin_write32(TIMER11_PERIOD,val)
+#define bfin_read_TIMER11_WIDTH() bfin_read32(TIMER11_WIDTH)
+#define bfin_write_TIMER11_WIDTH(val) bfin_write32(TIMER11_WIDTH,val)
+#define bfin_read_TMRS4_ENABLE() bfin_read16(TMRS4_ENABLE)
+#define bfin_write_TMRS4_ENABLE(val) bfin_write16(TMRS4_ENABLE,val)
+#define bfin_read_TMRS4_DISABLE() bfin_read16(TMRS4_DISABLE)
+#define bfin_write_TMRS4_DISABLE(val) bfin_write16(TMRS4_DISABLE,val)
+#define bfin_read_TMRS4_STATUS() bfin_read32(TMRS4_STATUS)
+#define bfin_write_TMRS4_STATUS(val) bfin_write32(TMRS4_STATUS,val)
+
+/* Programmable Flag 0 registers (0xFFC0 0700-0xFFC0 07FF) */
+#define bfin_read_FIO0_FLAG_D() bfin_read16(FIO0_FLAG_D)
+#define bfin_write_FIO0_FLAG_D(val) bfin_write16(FIO0_FLAG_D,val)
+#define bfin_read_FIO0_FLAG_C() bfin_read16(FIO0_FLAG_C)
+#define bfin_write_FIO0_FLAG_C(val) bfin_write16(FIO0_FLAG_C,val)
+#define bfin_read_FIO0_FLAG_S() bfin_read16(FIO0_FLAG_S)
+#define bfin_write_FIO0_FLAG_S(val) bfin_write16(FIO0_FLAG_S,val)
+#define bfin_read_FIO0_FLAG_T() bfin_read16(FIO0_FLAG_T)
+#define bfin_write_FIO0_FLAG_T(val) bfin_write16(FIO0_FLAG_T,val)
+#define bfin_read_FIO0_MASKA_D() bfin_read16(FIO0_MASKA_D)
+#define bfin_write_FIO0_MASKA_D(val) bfin_write16(FIO0_MASKA_D,val)
+#define bfin_read_FIO0_MASKA_C() bfin_read16(FIO0_MASKA_C)
+#define bfin_write_FIO0_MASKA_C(val) bfin_write16(FIO0_MASKA_C,val)
+#define bfin_read_FIO0_MASKA_S() bfin_read16(FIO0_MASKA_S)
+#define bfin_write_FIO0_MASKA_S(val) bfin_write16(FIO0_MASKA_S,val)
+#define bfin_read_FIO0_MASKA_T() bfin_read16(FIO0_MASKA_T)
+#define bfin_write_FIO0_MASKA_T(val) bfin_write16(FIO0_MASKA_T,val)
+#define bfin_read_FIO0_MASKB_D() bfin_read16(FIO0_MASKB_D)
+#define bfin_write_FIO0_MASKB_D(val) bfin_write16(FIO0_MASKB_D,val)
+#define bfin_read_FIO0_MASKB_C() bfin_read16(FIO0_MASKB_C)
+#define bfin_write_FIO0_MASKB_C(val) bfin_write16(FIO0_MASKB_C,val)
+#define bfin_read_FIO0_MASKB_S() bfin_read16(FIO0_MASKB_S)
+#define bfin_write_FIO0_MASKB_S(val) bfin_write16(FIO0_MASKB_S,val)
+#define bfin_read_FIO0_MASKB_T() bfin_read16(FIO0_MASKB_T)
+#define bfin_write_FIO0_MASKB_T(val) bfin_write16(FIO0_MASKB_T,val)
+#define bfin_read_FIO0_DIR() bfin_read16(FIO0_DIR)
+#define bfin_write_FIO0_DIR(val) bfin_write16(FIO0_DIR,val)
+#define bfin_read_FIO0_POLAR() bfin_read16(FIO0_POLAR)
+#define bfin_write_FIO0_POLAR(val) bfin_write16(FIO0_POLAR,val)
+#define bfin_read_FIO0_EDGE() bfin_read16(FIO0_EDGE)
+#define bfin_write_FIO0_EDGE(val) bfin_write16(FIO0_EDGE,val)
+#define bfin_read_FIO0_BOTH() bfin_read16(FIO0_BOTH)
+#define bfin_write_FIO0_BOTH(val) bfin_write16(FIO0_BOTH,val)
+#define bfin_read_FIO0_INEN() bfin_read16(FIO0_INEN)
+#define bfin_write_FIO0_INEN(val) bfin_write16(FIO0_INEN,val)
+/* Programmable Flag 1 registers (0xFFC0 1500-0xFFC0 15FF) */
+#define bfin_read_FIO1_FLAG_D() bfin_read16(FIO1_FLAG_D)
+#define bfin_write_FIO1_FLAG_D(val) bfin_write16(FIO1_FLAG_D,val)
+#define bfin_read_FIO1_FLAG_C() bfin_read16(FIO1_FLAG_C)
+#define bfin_write_FIO1_FLAG_C(val) bfin_write16(FIO1_FLAG_C,val)
+#define bfin_read_FIO1_FLAG_S() bfin_read16(FIO1_FLAG_S)
+#define bfin_write_FIO1_FLAG_S(val) bfin_write16(FIO1_FLAG_S,val)
+#define bfin_read_FIO1_FLAG_T() bfin_read16(FIO1_FLAG_T)
+#define bfin_write_FIO1_FLAG_T(val) bfin_write16(FIO1_FLAG_T,val)
+#define bfin_read_FIO1_MASKA_D() bfin_read16(FIO1_MASKA_D)
+#define bfin_write_FIO1_MASKA_D(val) bfin_write16(FIO1_MASKA_D,val)
+#define bfin_read_FIO1_MASKA_C() bfin_read16(FIO1_MASKA_C)
+#define bfin_write_FIO1_MASKA_C(val) bfin_write16(FIO1_MASKA_C,val)
+#define bfin_read_FIO1_MASKA_S() bfin_read16(FIO1_MASKA_S)
+#define bfin_write_FIO1_MASKA_S(val) bfin_write16(FIO1_MASKA_S,val)
+#define bfin_read_FIO1_MASKA_T() bfin_read16(FIO1_MASKA_T)
+#define bfin_write_FIO1_MASKA_T(val) bfin_write16(FIO1_MASKA_T,val)
+#define bfin_read_FIO1_MASKB_D() bfin_read16(FIO1_MASKB_D)
+#define bfin_write_FIO1_MASKB_D(val) bfin_write16(FIO1_MASKB_D,val)
+#define bfin_read_FIO1_MASKB_C() bfin_read16(FIO1_MASKB_C)
+#define bfin_write_FIO1_MASKB_C(val) bfin_write16(FIO1_MASKB_C,val)
+#define bfin_read_FIO1_MASKB_S() bfin_read16(FIO1_MASKB_S)
+#define bfin_write_FIO1_MASKB_S(val) bfin_write16(FIO1_MASKB_S,val)
+#define bfin_read_FIO1_MASKB_T() bfin_read16(FIO1_MASKB_T)
+#define bfin_write_FIO1_MASKB_T(val) bfin_write16(FIO1_MASKB_T,val)
+#define bfin_read_FIO1_DIR() bfin_read16(FIO1_DIR)
+#define bfin_write_FIO1_DIR(val) bfin_write16(FIO1_DIR,val)
+#define bfin_read_FIO1_POLAR() bfin_read16(FIO1_POLAR)
+#define bfin_write_FIO1_POLAR(val) bfin_write16(FIO1_POLAR,val)
+#define bfin_read_FIO1_EDGE() bfin_read16(FIO1_EDGE)
+#define bfin_write_FIO1_EDGE(val) bfin_write16(FIO1_EDGE,val)
+#define bfin_read_FIO1_BOTH() bfin_read16(FIO1_BOTH)
+#define bfin_write_FIO1_BOTH(val) bfin_write16(FIO1_BOTH,val)
+#define bfin_read_FIO1_INEN() bfin_read16(FIO1_INEN)
+#define bfin_write_FIO1_INEN(val) bfin_write16(FIO1_INEN,val)
+/* Programmable Flag registers (0xFFC0 1700-0xFFC0 17FF) */
+#define bfin_read_FIO2_FLAG_D() bfin_read16(FIO2_FLAG_D)
+#define bfin_write_FIO2_FLAG_D(val) bfin_write16(FIO2_FLAG_D,val)
+#define bfin_read_FIO2_FLAG_C() bfin_read16(FIO2_FLAG_C)
+#define bfin_write_FIO2_FLAG_C(val) bfin_write16(FIO2_FLAG_C,val)
+#define bfin_read_FIO2_FLAG_S() bfin_read16(FIO2_FLAG_S)
+#define bfin_write_FIO2_FLAG_S(val) bfin_write16(FIO2_FLAG_S,val)
+#define bfin_read_FIO2_FLAG_T() bfin_read16(FIO2_FLAG_T)
+#define bfin_write_FIO2_FLAG_T(val) bfin_write16(FIO2_FLAG_T,val)
+#define bfin_read_FIO2_MASKA_D() bfin_read16(FIO2_MASKA_D)
+#define bfin_write_FIO2_MASKA_D(val) bfin_write16(FIO2_MASKA_D,val)
+#define bfin_read_FIO2_MASKA_C() bfin_read16(FIO2_MASKA_C)
+#define bfin_write_FIO2_MASKA_C(val) bfin_write16(FIO2_MASKA_C,val)
+#define bfin_read_FIO2_MASKA_S() bfin_read16(FIO2_MASKA_S)
+#define bfin_write_FIO2_MASKA_S(val) bfin_write16(FIO2_MASKA_S,val)
+#define bfin_read_FIO2_MASKA_T() bfin_read16(FIO2_MASKA_T)
+#define bfin_write_FIO2_MASKA_T(val) bfin_write16(FIO2_MASKA_T,val)
+#define bfin_read_FIO2_MASKB_D() bfin_read16(FIO2_MASKB_D)
+#define bfin_write_FIO2_MASKB_D(val) bfin_write16(FIO2_MASKB_D,val)
+#define bfin_read_FIO2_MASKB_C() bfin_read16(FIO2_MASKB_C)
+#define bfin_write_FIO2_MASKB_C(val) bfin_write16(FIO2_MASKB_C,val)
+#define bfin_read_FIO2_MASKB_S() bfin_read16(FIO2_MASKB_S)
+#define bfin_write_FIO2_MASKB_S(val) bfin_write16(FIO2_MASKB_S,val)
+#define bfin_read_FIO2_MASKB_T() bfin_read16(FIO2_MASKB_T)
+#define bfin_write_FIO2_MASKB_T(val) bfin_write16(FIO2_MASKB_T,val)
+#define bfin_read_FIO2_DIR() bfin_read16(FIO2_DIR)
+#define bfin_write_FIO2_DIR(val) bfin_write16(FIO2_DIR,val)
+#define bfin_read_FIO2_POLAR() bfin_read16(FIO2_POLAR)
+#define bfin_write_FIO2_POLAR(val) bfin_write16(FIO2_POLAR,val)
+#define bfin_read_FIO2_EDGE() bfin_read16(FIO2_EDGE)
+#define bfin_write_FIO2_EDGE(val) bfin_write16(FIO2_EDGE,val)
+#define bfin_read_FIO2_BOTH() bfin_read16(FIO2_BOTH)
+#define bfin_write_FIO2_BOTH(val) bfin_write16(FIO2_BOTH,val)
+#define bfin_read_FIO2_INEN() bfin_read16(FIO2_INEN)
+#define bfin_write_FIO2_INEN(val) bfin_write16(FIO2_INEN,val)
+/* SPORT0 Controller (0xFFC00800 - 0xFFC008FF) */
+#define bfin_read_SPORT0_TCR1() bfin_read16(SPORT0_TCR1)
+#define bfin_write_SPORT0_TCR1(val) bfin_write16(SPORT0_TCR1,val)
+#define bfin_read_SPORT0_TCR2() bfin_read16(SPORT0_TCR2)
+#define bfin_write_SPORT0_TCR2(val) bfin_write16(SPORT0_TCR2,val)
+#define bfin_read_SPORT0_TCLKDIV() bfin_read16(SPORT0_TCLKDIV)
+#define bfin_write_SPORT0_TCLKDIV(val) bfin_write16(SPORT0_TCLKDIV,val)
+#define bfin_read_SPORT0_TFSDIV() bfin_read16(SPORT0_TFSDIV)
+#define bfin_write_SPORT0_TFSDIV(val) bfin_write16(SPORT0_TFSDIV,val)
+#define bfin_read_SPORT0_TX() bfin_read32(SPORT0_TX)
+#define bfin_write_SPORT0_TX(val) bfin_write32(SPORT0_TX,val)
+#define bfin_read_SPORT0_RX() bfin_read32(SPORT0_RX)
+#define bfin_write_SPORT0_RX(val) bfin_write32(SPORT0_RX,val)
+#define bfin_read_SPORT0_TX32() bfin_read32(SPORT0_TX)
+#define bfin_write_SPORT0_TX32(val) bfin_write32(SPORT0_TX,val)
+#define bfin_read_SPORT0_RX32() bfin_read32(SPORT0_RX)
+#define bfin_write_SPORT0_RX32(val) bfin_write32(SPORT0_RX,val)
+#define bfin_read_SPORT0_TX16() bfin_read16(SPORT0_TX)
+#define bfin_write_SPORT0_TX16(val) bfin_write16(SPORT0_TX,val)
+#define bfin_read_SPORT0_RX16() bfin_read16(SPORT0_RX)
+#define bfin_write_SPORT0_RX16(val) bfin_write16(SPORT0_RX,val)
+#define bfin_read_SPORT0_RCR1() bfin_read16(SPORT0_RCR1)
+#define bfin_write_SPORT0_RCR1(val) bfin_write16(SPORT0_RCR1,val)
+#define bfin_read_SPORT0_RCR2() bfin_read16(SPORT0_RCR2)
+#define bfin_write_SPORT0_RCR2(val) bfin_write16(SPORT0_RCR2,val)
+#define bfin_read_SPORT0_RCLKDIV() bfin_read16(SPORT0_RCLKDIV)
+#define bfin_write_SPORT0_RCLKDIV(val) bfin_write16(SPORT0_RCLKDIV,val)
+#define bfin_read_SPORT0_RFSDIV() bfin_read16(SPORT0_RFSDIV)
+#define bfin_write_SPORT0_RFSDIV(val) bfin_write16(SPORT0_RFSDIV,val)
+#define bfin_read_SPORT0_STAT() bfin_read16(SPORT0_STAT)
+#define bfin_write_SPORT0_STAT(val) bfin_write16(SPORT0_STAT,val)
+#define bfin_read_SPORT0_CHNL() bfin_read16(SPORT0_CHNL)
+#define bfin_write_SPORT0_CHNL(val) bfin_write16(SPORT0_CHNL,val)
+#define bfin_read_SPORT0_MCMC1() bfin_read16(SPORT0_MCMC1)
+#define bfin_write_SPORT0_MCMC1(val) bfin_write16(SPORT0_MCMC1,val)
+#define bfin_read_SPORT0_MCMC2() bfin_read16(SPORT0_MCMC2)
+#define bfin_write_SPORT0_MCMC2(val) bfin_write16(SPORT0_MCMC2,val)
+#define bfin_read_SPORT0_MTCS0() bfin_read32(SPORT0_MTCS0)
+#define bfin_write_SPORT0_MTCS0(val) bfin_write32(SPORT0_MTCS0,val)
+#define bfin_read_SPORT0_MTCS1() bfin_read32(SPORT0_MTCS1)
+#define bfin_write_SPORT0_MTCS1(val) bfin_write32(SPORT0_MTCS1,val)
+#define bfin_read_SPORT0_MTCS2() bfin_read32(SPORT0_MTCS2)
+#define bfin_write_SPORT0_MTCS2(val) bfin_write32(SPORT0_MTCS2,val)
+#define bfin_read_SPORT0_MTCS3() bfin_read32(SPORT0_MTCS3)
+#define bfin_write_SPORT0_MTCS3(val) bfin_write32(SPORT0_MTCS3,val)
+#define bfin_read_SPORT0_MRCS0() bfin_read32(SPORT0_MRCS0)
+#define bfin_write_SPORT0_MRCS0(val) bfin_write32(SPORT0_MRCS0,val)
+#define bfin_read_SPORT0_MRCS1() bfin_read32(SPORT0_MRCS1)
+#define bfin_write_SPORT0_MRCS1(val) bfin_write32(SPORT0_MRCS1,val)
+#define bfin_read_SPORT0_MRCS2() bfin_read32(SPORT0_MRCS2)
+#define bfin_write_SPORT0_MRCS2(val) bfin_write32(SPORT0_MRCS2,val)
+#define bfin_read_SPORT0_MRCS3() bfin_read32(SPORT0_MRCS3)
+#define bfin_write_SPORT0_MRCS3(val) bfin_write32(SPORT0_MRCS3,val)
+/* SPORT1 Controller (0xFFC00900 - 0xFFC009FF) */
+#define bfin_read_SPORT1_TCR1() bfin_read16(SPORT1_TCR1)
+#define bfin_write_SPORT1_TCR1(val) bfin_write16(SPORT1_TCR1,val)
+#define bfin_read_SPORT1_TCR2() bfin_read16(SPORT1_TCR2)
+#define bfin_write_SPORT1_TCR2(val) bfin_write16(SPORT1_TCR2,val)
+#define bfin_read_SPORT1_TCLKDIV() bfin_read16(SPORT1_TCLKDIV)
+#define bfin_write_SPORT1_TCLKDIV(val) bfin_write16(SPORT1_TCLKDIV,val)
+#define bfin_read_SPORT1_TFSDIV() bfin_read16(SPORT1_TFSDIV)
+#define bfin_write_SPORT1_TFSDIV(val) bfin_write16(SPORT1_TFSDIV,val)
+#define bfin_read_SPORT1_TX() bfin_read32(SPORT1_TX)
+#define bfin_write_SPORT1_TX(val) bfin_write32(SPORT1_TX,val)
+#define bfin_read_SPORT1_RX() bfin_read32(SPORT1_RX)
+#define bfin_write_SPORT1_RX(val) bfin_write32(SPORT1_RX,val)
+#define bfin_read_SPORT1_TX32() bfin_read32(SPORT1_TX)
+#define bfin_write_SPORT1_TX32(val) bfin_write32(SPORT1_TX,val)
+#define bfin_read_SPORT1_RX32() bfin_read32(SPORT1_RX)
+#define bfin_write_SPORT1_RX32(val) bfin_write32(SPORT1_RX,val)
+#define bfin_read_SPORT1_TX16() bfin_read16(SPORT1_TX)
+#define bfin_write_SPORT1_TX16(val) bfin_write16(SPORT1_TX,val)
+#define bfin_read_SPORT1_RX16() bfin_read16(SPORT1_RX)
+#define bfin_write_SPORT1_RX16(val) bfin_write16(SPORT1_RX,val)
+#define bfin_read_SPORT1_RCR1() bfin_read16(SPORT1_RCR1)
+#define bfin_write_SPORT1_RCR1(val) bfin_write16(SPORT1_RCR1,val)
+#define bfin_read_SPORT1_RCR2() bfin_read16(SPORT1_RCR2)
+#define bfin_write_SPORT1_RCR2(val) bfin_write16(SPORT1_RCR2,val)
+#define bfin_read_SPORT1_RCLKDIV() bfin_read16(SPORT1_RCLKDIV)
+#define bfin_write_SPORT1_RCLKDIV(val) bfin_write16(SPORT1_RCLKDIV,val)
+#define bfin_read_SPORT1_RFSDIV() bfin_read16(SPORT1_RFSDIV)
+#define bfin_write_SPORT1_RFSDIV(val) bfin_write16(SPORT1_RFSDIV,val)
+#define bfin_read_SPORT1_STAT() bfin_read16(SPORT1_STAT)
+#define bfin_write_SPORT1_STAT(val) bfin_write16(SPORT1_STAT,val)
+#define bfin_read_SPORT1_CHNL() bfin_read16(SPORT1_CHNL)
+#define bfin_write_SPORT1_CHNL(val) bfin_write16(SPORT1_CHNL,val)
+#define bfin_read_SPORT1_MCMC1() bfin_read16(SPORT1_MCMC1)
+#define bfin_write_SPORT1_MCMC1(val) bfin_write16(SPORT1_MCMC1,val)
+#define bfin_read_SPORT1_MCMC2() bfin_read16(SPORT1_MCMC2)
+#define bfin_write_SPORT1_MCMC2(val) bfin_write16(SPORT1_MCMC2,val)
+#define bfin_read_SPORT1_MTCS0() bfin_read32(SPORT1_MTCS0)
+#define bfin_write_SPORT1_MTCS0(val) bfin_write32(SPORT1_MTCS0,val)
+#define bfin_read_SPORT1_MTCS1() bfin_read32(SPORT1_MTCS1)
+#define bfin_write_SPORT1_MTCS1(val) bfin_write32(SPORT1_MTCS1,val)
+#define bfin_read_SPORT1_MTCS2() bfin_read32(SPORT1_MTCS2)
+#define bfin_write_SPORT1_MTCS2(val) bfin_write32(SPORT1_MTCS2,val)
+#define bfin_read_SPORT1_MTCS3() bfin_read32(SPORT1_MTCS3)
+#define bfin_write_SPORT1_MTCS3(val) bfin_write32(SPORT1_MTCS3,val)
+#define bfin_read_SPORT1_MRCS0() bfin_read32(SPORT1_MRCS0)
+#define bfin_write_SPORT1_MRCS0(val) bfin_write32(SPORT1_MRCS0,val)
+#define bfin_read_SPORT1_MRCS1() bfin_read32(SPORT1_MRCS1)
+#define bfin_write_SPORT1_MRCS1(val) bfin_write32(SPORT1_MRCS1,val)
+#define bfin_read_SPORT1_MRCS2() bfin_read32(SPORT1_MRCS2)
+#define bfin_write_SPORT1_MRCS2(val) bfin_write32(SPORT1_MRCS2,val)
+#define bfin_read_SPORT1_MRCS3() bfin_read32(SPORT1_MRCS3)
+#define bfin_write_SPORT1_MRCS3(val) bfin_write32(SPORT1_MRCS3,val)
+/* Asynchronous Memory Controller - External Bus Interface Unit */
+#define bfin_read_EBIU_AMGCTL() bfin_read16(EBIU_AMGCTL)
+#define bfin_write_EBIU_AMGCTL(val) bfin_write16(EBIU_AMGCTL,val)
+#define bfin_read_EBIU_AMBCTL0() bfin_read32(EBIU_AMBCTL0)
+#define bfin_write_EBIU_AMBCTL0(val) bfin_write32(EBIU_AMBCTL0,val)
+#define bfin_read_EBIU_AMBCTL1() bfin_read32(EBIU_AMBCTL1)
+#define bfin_write_EBIU_AMBCTL1(val) bfin_write32(EBIU_AMBCTL1,val)
+/* SDRAM Controller External Bus Interface Unit (0xFFC00A00 - 0xFFC00AFF) */
+#define bfin_read_EBIU_SDGCTL() bfin_read32(EBIU_SDGCTL)
+#define bfin_write_EBIU_SDGCTL(val) bfin_write32(EBIU_SDGCTL,val)
+#define bfin_read_EBIU_SDBCTL() bfin_read32(EBIU_SDBCTL)
+#define bfin_write_EBIU_SDBCTL(val) bfin_write32(EBIU_SDBCTL,val)
+#define bfin_read_EBIU_SDRRC() bfin_read16(EBIU_SDRRC)
+#define bfin_write_EBIU_SDRRC(val) bfin_write16(EBIU_SDRRC,val)
+#define bfin_read_EBIU_SDSTAT() bfin_read16(EBIU_SDSTAT)
+#define bfin_write_EBIU_SDSTAT(val) bfin_write16(EBIU_SDSTAT,val)
+/* Parallel Peripheral Interface (PPI) 0 registers (0xFFC0 1000-0xFFC0 10FF) */
+#define bfin_read_PPI0_CONTROL() bfin_read16(PPI0_CONTROL)
+#define bfin_write_PPI0_CONTROL(val) bfin_write16(PPI0_CONTROL,val)
+#define bfin_read_PPI0_STATUS() bfin_read16(PPI0_STATUS)
+#define bfin_write_PPI0_STATUS(val) bfin_write16(PPI0_STATUS,val)
+#define bfin_read_PPI0_COUNT() bfin_read16(PPI0_COUNT)
+#define bfin_write_PPI0_COUNT(val) bfin_write16(PPI0_COUNT,val)
+#define bfin_read_PPI0_DELAY() bfin_read16(PPI0_DELAY)
+#define bfin_write_PPI0_DELAY(val) bfin_write16(PPI0_DELAY,val)
+#define bfin_read_PPI0_FRAME() bfin_read16(PPI0_FRAME)
+#define bfin_write_PPI0_FRAME(val) bfin_write16(PPI0_FRAME,val)
+/* Parallel Peripheral Interface (PPI) 1 registers (0xFFC0 1300-0xFFC0 13FF) */
+#define bfin_read_PPI1_CONTROL() bfin_read16(PPI1_CONTROL)
+#define bfin_write_PPI1_CONTROL(val) bfin_write16(PPI1_CONTROL,val)
+#define bfin_read_PPI1_STATUS() bfin_read16(PPI1_STATUS)
+#define bfin_write_PPI1_STATUS(val) bfin_write16(PPI1_STATUS,val)
+#define bfin_read_PPI1_COUNT() bfin_read16(PPI1_COUNT)
+#define bfin_write_PPI1_COUNT(val) bfin_write16(PPI1_COUNT,val)
+#define bfin_read_PPI1_DELAY() bfin_read16(PPI1_DELAY)
+#define bfin_write_PPI1_DELAY(val) bfin_write16(PPI1_DELAY,val)
+#define bfin_read_PPI1_FRAME() bfin_read16(PPI1_FRAME)
+#define bfin_write_PPI1_FRAME(val) bfin_write16(PPI1_FRAME,val)
+/*DMA traffic control registers */
+#define bfin_read_DMA1_TC_PER() bfin_read16(DMA1_TC_PER)
+#define bfin_write_DMA1_TC_PER(val) bfin_write16(DMA1_TC_PER,val)
+#define bfin_read_DMA1_TC_CNT() bfin_read16(DMA1_TC_CNT)
+#define bfin_write_DMA1_TC_CNT(val) bfin_write16(DMA1_TC_CNT,val)
+#define bfin_read_DMA2_TC_PER() bfin_read16(DMA2_TC_PER)
+#define bfin_write_DMA2_TC_PER(val) bfin_write16(DMA2_TC_PER,val)
+#define bfin_read_DMA2_TC_CNT() bfin_read16(DMA2_TC_CNT)
+#define bfin_write_DMA2_TC_CNT(val) bfin_write16(DMA2_TC_CNT,val)
+/* DMA1 Controller registers (0xFFC0 1C00-0xFFC0 1FFF) */
+#define bfin_read_DMA1_0_CONFIG() bfin_read16(DMA1_0_CONFIG)
+#define bfin_write_DMA1_0_CONFIG(val) bfin_write16(DMA1_0_CONFIG,val)
+#define bfin_read_DMA1_0_NEXT_DESC_PTR() bfin_read32(DMA1_0_NEXT_DESC_PTR)
+#define bfin_write_DMA1_0_NEXT_DESC_PTR(val) bfin_write32(DMA1_0_NEXT_DESC_PTR,val)
+#define bfin_read_DMA1_0_START_ADDR() bfin_read32(DMA1_0_START_ADDR)
+#define bfin_write_DMA1_0_START_ADDR(val) bfin_write32(DMA1_0_START_ADDR,val)
+#define bfin_read_DMA1_0_X_COUNT() bfin_read16(DMA1_0_X_COUNT)
+#define bfin_write_DMA1_0_X_COUNT(val) bfin_write16(DMA1_0_X_COUNT,val)
+#define bfin_read_DMA1_0_Y_COUNT() bfin_read16(DMA1_0_Y_COUNT)
+#define bfin_write_DMA1_0_Y_COUNT(val) bfin_write16(DMA1_0_Y_COUNT,val)
+#define bfin_read_DMA1_0_X_MODIFY() bfin_read16(DMA1_0_X_MODIFY)
+#define bfin_write_DMA1_0_X_MODIFY(val) bfin_write16(DMA1_0_X_MODIFY,val)
+#define bfin_read_DMA1_0_Y_MODIFY() bfin_read16(DMA1_0_Y_MODIFY)
+#define bfin_write_DMA1_0_Y_MODIFY(val) bfin_write16(DMA1_0_Y_MODIFY,val)
+#define bfin_read_DMA1_0_CURR_DESC_PTR() bfin_read32(DMA1_0_CURR_DESC_PTR)
+#define bfin_write_DMA1_0_CURR_DESC_PTR(val) bfin_write32(DMA1_0_CURR_DESC_PTR,val)
+#define bfin_read_DMA1_0_CURR_ADDR() bfin_read32(DMA1_0_CURR_ADDR)
+#define bfin_write_DMA1_0_CURR_ADDR(val) bfin_write32(DMA1_0_CURR_ADDR,val)
+#define bfin_read_DMA1_0_CURR_X_COUNT() bfin_read16(DMA1_0_CURR_X_COUNT)
+#define bfin_write_DMA1_0_CURR_X_COUNT(val) bfin_write16(DMA1_0_CURR_X_COUNT,val)
+#define bfin_read_DMA1_0_CURR_Y_COUNT() bfin_read16(DMA1_0_CURR_Y_COUNT)
+#define bfin_write_DMA1_0_CURR_Y_COUNT(val) bfin_write16(DMA1_0_CURR_Y_COUNT,val)
+#define bfin_read_DMA1_0_IRQ_STATUS() bfin_read16(DMA1_0_IRQ_STATUS)
+#define bfin_write_DMA1_0_IRQ_STATUS(val) bfin_write16(DMA1_0_IRQ_STATUS,val)
+#define bfin_read_DMA1_0_PERIPHERAL_MAP() bfin_read16(DMA1_0_PERIPHERAL_MAP)
+#define bfin_write_DMA1_0_PERIPHERAL_MAP(val) bfin_write16(DMA1_0_PERIPHERAL_MAP,val)
+#define bfin_read_DMA1_1_CONFIG() bfin_read16(DMA1_1_CONFIG)
+#define bfin_write_DMA1_1_CONFIG(val) bfin_write16(DMA1_1_CONFIG,val)
+#define bfin_read_DMA1_1_NEXT_DESC_PTR() bfin_read32(DMA1_1_NEXT_DESC_PTR)
+#define bfin_write_DMA1_1_NEXT_DESC_PTR(val) bfin_write32(DMA1_1_NEXT_DESC_PTR,val)
+#define bfin_read_DMA1_1_START_ADDR() bfin_read32(DMA1_1_START_ADDR)
+#define bfin_write_DMA1_1_START_ADDR(val) bfin_write32(DMA1_1_START_ADDR,val)
+#define bfin_read_DMA1_1_X_COUNT() bfin_read16(DMA1_1_X_COUNT)
+#define bfin_write_DMA1_1_X_COUNT(val) bfin_write16(DMA1_1_X_COUNT,val)
+#define bfin_read_DMA1_1_Y_COUNT() bfin_read16(DMA1_1_Y_COUNT)
+#define bfin_write_DMA1_1_Y_COUNT(val) bfin_write16(DMA1_1_Y_COUNT,val)
+#define bfin_read_DMA1_1_X_MODIFY() bfin_read16(DMA1_1_X_MODIFY)
+#define bfin_write_DMA1_1_X_MODIFY(val) bfin_write16(DMA1_1_X_MODIFY,val)
+#define bfin_read_DMA1_1_Y_MODIFY() bfin_read16(DMA1_1_Y_MODIFY)
+#define bfin_write_DMA1_1_Y_MODIFY(val) bfin_write16(DMA1_1_Y_MODIFY,val)
+#define bfin_read_DMA1_1_CURR_DESC_PTR() bfin_read32(DMA1_1_CURR_DESC_PTR)
+#define bfin_write_DMA1_1_CURR_DESC_PTR(val) bfin_write32(DMA1_1_CURR_DESC_PTR,val)
+#define bfin_read_DMA1_1_CURR_ADDR() bfin_read32(DMA1_1_CURR_ADDR)
+#define bfin_write_DMA1_1_CURR_ADDR(val) bfin_write32(DMA1_1_CURR_ADDR,val)
+#define bfin_read_DMA1_1_CURR_X_COUNT() bfin_read16(DMA1_1_CURR_X_COUNT)
+#define bfin_write_DMA1_1_CURR_X_COUNT(val) bfin_write16(DMA1_1_CURR_X_COUNT,val)
+#define bfin_read_DMA1_1_CURR_Y_COUNT() bfin_read16(DMA1_1_CURR_Y_COUNT)
+#define bfin_write_DMA1_1_CURR_Y_COUNT(val) bfin_write16(DMA1_1_CURR_Y_COUNT,val)
+#define bfin_read_DMA1_1_IRQ_STATUS() bfin_read16(DMA1_1_IRQ_STATUS)
+#define bfin_write_DMA1_1_IRQ_STATUS(val) bfin_write16(DMA1_1_IRQ_STATUS,val)
+#define bfin_read_DMA1_1_PERIPHERAL_MAP() bfin_read16(DMA1_1_PERIPHERAL_MAP)
+#define bfin_write_DMA1_1_PERIPHERAL_MAP(val) bfin_write16(DMA1_1_PERIPHERAL_MAP,val)
+#define bfin_read_DMA1_2_CONFIG() bfin_read16(DMA1_2_CONFIG)
+#define bfin_write_DMA1_2_CONFIG(val) bfin_write16(DMA1_2_CONFIG,val)
+#define bfin_read_DMA1_2_NEXT_DESC_PTR() bfin_read32(DMA1_2_NEXT_DESC_PTR)
+#define bfin_write_DMA1_2_NEXT_DESC_PTR(val) bfin_write32(DMA1_2_NEXT_DESC_PTR,val)
+#define bfin_read_DMA1_2_START_ADDR() bfin_read32(DMA1_2_START_ADDR)
+#define bfin_write_DMA1_2_START_ADDR(val) bfin_write32(DMA1_2_START_ADDR,val)
+#define bfin_read_DMA1_2_X_COUNT() bfin_read16(DMA1_2_X_COUNT)
+#define bfin_write_DMA1_2_X_COUNT(val) bfin_write16(DMA1_2_X_COUNT,val)
+#define bfin_read_DMA1_2_Y_COUNT() bfin_read16(DMA1_2_Y_COUNT)
+#define bfin_write_DMA1_2_Y_COUNT(val) bfin_write16(DMA1_2_Y_COUNT,val)
+#define bfin_read_DMA1_2_X_MODIFY() bfin_read16(DMA1_2_X_MODIFY)
+#define bfin_write_DMA1_2_X_MODIFY(val) bfin_write16(DMA1_2_X_MODIFY,val)
+#define bfin_read_DMA1_2_Y_MODIFY() bfin_read16(DMA1_2_Y_MODIFY)
+#define bfin_write_DMA1_2_Y_MODIFY(val) bfin_write16(DMA1_2_Y_MODIFY,val)
+#define bfin_read_DMA1_2_CURR_DESC_PTR() bfin_read32(DMA1_2_CURR_DESC_PTR)
+#define bfin_write_DMA1_2_CURR_DESC_PTR(val) bfin_write32(DMA1_2_CURR_DESC_PTR,val)
+#define bfin_read_DMA1_2_CURR_ADDR() bfin_read32(DMA1_2_CURR_ADDR)
+#define bfin_write_DMA1_2_CURR_ADDR(val) bfin_write32(DMA1_2_CURR_ADDR,val)
+#define bfin_read_DMA1_2_CURR_X_COUNT() bfin_read16(DMA1_2_CURR_X_COUNT)
+#define bfin_write_DMA1_2_CURR_X_COUNT(val) bfin_write16(DMA1_2_CURR_X_COUNT,val)
+#define bfin_read_DMA1_2_CURR_Y_COUNT() bfin_read16(DMA1_2_CURR_Y_COUNT)
+#define bfin_write_DMA1_2_CURR_Y_COUNT(val) bfin_write16(DMA1_2_CURR_Y_COUNT,val)
+#define bfin_read_DMA1_2_IRQ_STATUS() bfin_read16(DMA1_2_IRQ_STATUS)
+#define bfin_write_DMA1_2_IRQ_STATUS(val) bfin_write16(DMA1_2_IRQ_STATUS,val)
+#define bfin_read_DMA1_2_PERIPHERAL_MAP() bfin_read16(DMA1_2_PERIPHERAL_MAP)
+#define bfin_write_DMA1_2_PERIPHERAL_MAP(val) bfin_write16(DMA1_2_PERIPHERAL_MAP,val)
+#define bfin_read_DMA1_3_CONFIG() bfin_read16(DMA1_3_CONFIG)
+#define bfin_write_DMA1_3_CONFIG(val) bfin_write16(DMA1_3_CONFIG,val)
+#define bfin_read_DMA1_3_NEXT_DESC_PTR() bfin_read32(DMA1_3_NEXT_DESC_PTR)
+#define bfin_write_DMA1_3_NEXT_DESC_PTR(val) bfin_write32(DMA1_3_NEXT_DESC_PTR,val)
+#define bfin_read_DMA1_3_START_ADDR() bfin_read32(DMA1_3_START_ADDR)
+#define bfin_write_DMA1_3_START_ADDR(val) bfin_write32(DMA1_3_START_ADDR,val)
+#define bfin_read_DMA1_3_X_COUNT() bfin_read16(DMA1_3_X_COUNT)
+#define bfin_write_DMA1_3_X_COUNT(val) bfin_write16(DMA1_3_X_COUNT,val)
+#define bfin_read_DMA1_3_Y_COUNT() bfin_read16(DMA1_3_Y_COUNT)
+#define bfin_write_DMA1_3_Y_COUNT(val) bfin_write16(DMA1_3_Y_COUNT,val)
+#define bfin_read_DMA1_3_X_MODIFY() bfin_read16(DMA1_3_X_MODIFY)
+#define bfin_write_DMA1_3_X_MODIFY(val) bfin_write16(DMA1_3_X_MODIFY,val)
+#define bfin_read_DMA1_3_Y_MODIFY() bfin_read16(DMA1_3_Y_MODIFY)
+#define bfin_write_DMA1_3_Y_MODIFY(val) bfin_write16(DMA1_3_Y_MODIFY,val)
+#define bfin_read_DMA1_3_CURR_DESC_PTR() bfin_read32(DMA1_3_CURR_DESC_PTR)
+#define bfin_write_DMA1_3_CURR_DESC_PTR(val) bfin_write32(DMA1_3_CURR_DESC_PTR,val)
+#define bfin_read_DMA1_3_CURR_ADDR() bfin_read32(DMA1_3_CURR_ADDR)
+#define bfin_write_DMA1_3_CURR_ADDR(val) bfin_write32(DMA1_3_CURR_ADDR,val)
+#define bfin_read_DMA1_3_CURR_X_COUNT() bfin_read16(DMA1_3_CURR_X_COUNT)
+#define bfin_write_DMA1_3_CURR_X_COUNT(val) bfin_write16(DMA1_3_CURR_X_COUNT,val)
+#define bfin_read_DMA1_3_CURR_Y_COUNT() bfin_read16(DMA1_3_CURR_Y_COUNT)
+#define bfin_write_DMA1_3_CURR_Y_COUNT(val) bfin_write16(DMA1_3_CURR_Y_COUNT,val)
+#define bfin_read_DMA1_3_IRQ_STATUS() bfin_read16(DMA1_3_IRQ_STATUS)
+#define bfin_write_DMA1_3_IRQ_STATUS(val) bfin_write16(DMA1_3_IRQ_STATUS,val)
+#define bfin_read_DMA1_3_PERIPHERAL_MAP() bfin_read16(DMA1_3_PERIPHERAL_MAP)
+#define bfin_write_DMA1_3_PERIPHERAL_MAP(val) bfin_write16(DMA1_3_PERIPHERAL_MAP,val)
+#define bfin_read_DMA1_4_CONFIG() bfin_read16(DMA1_4_CONFIG)
+#define bfin_write_DMA1_4_CONFIG(val) bfin_write16(DMA1_4_CONFIG,val)
+#define bfin_read_DMA1_4_NEXT_DESC_PTR() bfin_read32(DMA1_4_NEXT_DESC_PTR)
+#define bfin_write_DMA1_4_NEXT_DESC_PTR(val) bfin_write32(DMA1_4_NEXT_DESC_PTR,val)
+#define bfin_read_DMA1_4_START_ADDR() bfin_read32(DMA1_4_START_ADDR)
+#define bfin_write_DMA1_4_START_ADDR(val) bfin_write32(DMA1_4_START_ADDR,val)
+#define bfin_read_DMA1_4_X_COUNT() bfin_read16(DMA1_4_X_COUNT)
+#define bfin_write_DMA1_4_X_COUNT(val) bfin_write16(DMA1_4_X_COUNT,val)
+#define bfin_read_DMA1_4_Y_COUNT() bfin_read16(DMA1_4_Y_COUNT)
+#define bfin_write_DMA1_4_Y_COUNT(val) bfin_write16(DMA1_4_Y_COUNT,val)
+#define bfin_read_DMA1_4_X_MODIFY() bfin_read16(DMA1_4_X_MODIFY)
+#define bfin_write_DMA1_4_X_MODIFY(val) bfin_write16(DMA1_4_X_MODIFY,val)
+#define bfin_read_DMA1_4_Y_MODIFY() bfin_read16(DMA1_4_Y_MODIFY)
+#define bfin_write_DMA1_4_Y_MODIFY(val) bfin_write16(DMA1_4_Y_MODIFY,val)
+#define bfin_read_DMA1_4_CURR_DESC_PTR() bfin_read32(DMA1_4_CURR_DESC_PTR)
+#define bfin_write_DMA1_4_CURR_DESC_PTR(val) bfin_write32(DMA1_4_CURR_DESC_PTR,val)
+#define bfin_read_DMA1_4_CURR_ADDR() bfin_read32(DMA1_4_CURR_ADDR)
+#define bfin_write_DMA1_4_CURR_ADDR(val) bfin_write32(DMA1_4_CURR_ADDR,val)
+#define bfin_read_DMA1_4_CURR_X_COUNT() bfin_read16(DMA1_4_CURR_X_COUNT)
+#define bfin_write_DMA1_4_CURR_X_COUNT(val) bfin_write16(DMA1_4_CURR_X_COUNT,val)
+#define bfin_read_DMA1_4_CURR_Y_COUNT() bfin_read16(DMA1_4_CURR_Y_COUNT)
+#define bfin_write_DMA1_4_CURR_Y_COUNT(val) bfin_write16(DMA1_4_CURR_Y_COUNT,val)
+#define bfin_read_DMA1_4_IRQ_STATUS() bfin_read16(DMA1_4_IRQ_STATUS)
+#define bfin_write_DMA1_4_IRQ_STATUS(val) bfin_write16(DMA1_4_IRQ_STATUS,val)
+#define bfin_read_DMA1_4_PERIPHERAL_MAP() bfin_read16(DMA1_4_PERIPHERAL_MAP)
+#define bfin_write_DMA1_4_PERIPHERAL_MAP(val) bfin_write16(DMA1_4_PERIPHERAL_MAP,val)
+#define bfin_read_DMA1_5_CONFIG() bfin_read16(DMA1_5_CONFIG)
+#define bfin_write_DMA1_5_CONFIG(val) bfin_write16(DMA1_5_CONFIG,val)
+#define bfin_read_DMA1_5_NEXT_DESC_PTR() bfin_read32(DMA1_5_NEXT_DESC_PTR)
+#define bfin_write_DMA1_5_NEXT_DESC_PTR(val) bfin_write32(DMA1_5_NEXT_DESC_PTR,val)
+#define bfin_read_DMA1_5_START_ADDR() bfin_read32(DMA1_5_START_ADDR)
+#define bfin_write_DMA1_5_START_ADDR(val) bfin_write32(DMA1_5_START_ADDR,val)
+#define bfin_read_DMA1_5_X_COUNT() bfin_read16(DMA1_5_X_COUNT)
+#define bfin_write_DMA1_5_X_COUNT(val) bfin_write16(DMA1_5_X_COUNT,val)
+#define bfin_read_DMA1_5_Y_COUNT() bfin_read16(DMA1_5_Y_COUNT)
+#define bfin_write_DMA1_5_Y_COUNT(val) bfin_write16(DMA1_5_Y_COUNT,val)
+#define bfin_read_DMA1_5_X_MODIFY() bfin_read16(DMA1_5_X_MODIFY)
+#define bfin_write_DMA1_5_X_MODIFY(val) bfin_write16(DMA1_5_X_MODIFY,val)
+#define bfin_read_DMA1_5_Y_MODIFY() bfin_read16(DMA1_5_Y_MODIFY)
+#define bfin_write_DMA1_5_Y_MODIFY(val) bfin_write16(DMA1_5_Y_MODIFY,val)
+#define bfin_read_DMA1_5_CURR_DESC_PTR() bfin_read32(DMA1_5_CURR_DESC_PTR)
+#define bfin_write_DMA1_5_CURR_DESC_PTR(val) bfin_write32(DMA1_5_CURR_DESC_PTR,val)
+#define bfin_read_DMA1_5_CURR_ADDR() bfin_read32(DMA1_5_CURR_ADDR)
+#define bfin_write_DMA1_5_CURR_ADDR(val) bfin_write32(DMA1_5_CURR_ADDR,val)
+#define bfin_read_DMA1_5_CURR_X_COUNT() bfin_read16(DMA1_5_CURR_X_COUNT)
+#define bfin_write_DMA1_5_CURR_X_COUNT(val) bfin_write16(DMA1_5_CURR_X_COUNT,val)
+#define bfin_read_DMA1_5_CURR_Y_COUNT() bfin_read16(DMA1_5_CURR_Y_COUNT)
+#define bfin_write_DMA1_5_CURR_Y_COUNT(val) bfin_write16(DMA1_5_CURR_Y_COUNT,val)
+#define bfin_read_DMA1_5_IRQ_STATUS() bfin_read16(DMA1_5_IRQ_STATUS)
+#define bfin_write_DMA1_5_IRQ_STATUS(val) bfin_write16(DMA1_5_IRQ_STATUS,val)
+#define bfin_read_DMA1_5_PERIPHERAL_MAP() bfin_read16(DMA1_5_PERIPHERAL_MAP)
+#define bfin_write_DMA1_5_PERIPHERAL_MAP(val) bfin_write16(DMA1_5_PERIPHERAL_MAP,val)
+#define bfin_read_DMA1_6_CONFIG() bfin_read16(DMA1_6_CONFIG)
+#define bfin_write_DMA1_6_CONFIG(val) bfin_write16(DMA1_6_CONFIG,val)
+#define bfin_read_DMA1_6_NEXT_DESC_PTR() bfin_read32(DMA1_6_NEXT_DESC_PTR)
+#define bfin_write_DMA1_6_NEXT_DESC_PTR(val) bfin_write32(DMA1_6_NEXT_DESC_PTR,val)
+#define bfin_read_DMA1_6_START_ADDR() bfin_read32(DMA1_6_START_ADDR)
+#define bfin_write_DMA1_6_START_ADDR(val) bfin_write32(DMA1_6_START_ADDR,val)
+#define bfin_read_DMA1_6_X_COUNT() bfin_read16(DMA1_6_X_COUNT)
+#define bfin_write_DMA1_6_X_COUNT(val) bfin_write16(DMA1_6_X_COUNT,val)
+#define bfin_read_DMA1_6_Y_COUNT() bfin_read16(DMA1_6_Y_COUNT)
+#define bfin_write_DMA1_6_Y_COUNT(val) bfin_write16(DMA1_6_Y_COUNT,val)
+#define bfin_read_DMA1_6_X_MODIFY() bfin_read16(DMA1_6_X_MODIFY)
+#define bfin_write_DMA1_6_X_MODIFY(val) bfin_write16(DMA1_6_X_MODIFY,val)
+#define bfin_read_DMA1_6_Y_MODIFY() bfin_read16(DMA1_6_Y_MODIFY)
+#define bfin_write_DMA1_6_Y_MODIFY(val) bfin_write16(DMA1_6_Y_MODIFY,val)
+#define bfin_read_DMA1_6_CURR_DESC_PTR() bfin_read32(DMA1_6_CURR_DESC_PTR)
+#define bfin_write_DMA1_6_CURR_DESC_PTR(val) bfin_write32(DMA1_6_CURR_DESC_PTR,val)
+#define bfin_read_DMA1_6_CURR_ADDR() bfin_read32(DMA1_6_CURR_ADDR)
+#define bfin_write_DMA1_6_CURR_ADDR(val) bfin_write32(DMA1_6_CURR_ADDR,val)
+#define bfin_read_DMA1_6_CURR_X_COUNT() bfin_read16(DMA1_6_CURR_X_COUNT)
+#define bfin_write_DMA1_6_CURR_X_COUNT(val) bfin_write16(DMA1_6_CURR_X_COUNT,val)
+#define bfin_read_DMA1_6_CURR_Y_COUNT() bfin_read16(DMA1_6_CURR_Y_COUNT)
+#define bfin_write_DMA1_6_CURR_Y_COUNT(val) bfin_write16(DMA1_6_CURR_Y_COUNT,val)
+#define bfin_read_DMA1_6_IRQ_STATUS() bfin_read16(DMA1_6_IRQ_STATUS)
+#define bfin_write_DMA1_6_IRQ_STATUS(val) bfin_write16(DMA1_6_IRQ_STATUS,val)
+#define bfin_read_DMA1_6_PERIPHERAL_MAP() bfin_read16(DMA1_6_PERIPHERAL_MAP)
+#define bfin_write_DMA1_6_PERIPHERAL_MAP(val) bfin_write16(DMA1_6_PERIPHERAL_MAP,val)
+#define bfin_read_DMA1_7_CONFIG() bfin_read16(DMA1_7_CONFIG)
+#define bfin_write_DMA1_7_CONFIG(val) bfin_write16(DMA1_7_CONFIG,val)
+#define bfin_read_DMA1_7_NEXT_DESC_PTR() bfin_read32(DMA1_7_NEXT_DESC_PTR)
+#define bfin_write_DMA1_7_NEXT_DESC_PTR(val) bfin_write32(DMA1_7_NEXT_DESC_PTR,val)
+#define bfin_read_DMA1_7_START_ADDR() bfin_read32(DMA1_7_START_ADDR)
+#define bfin_write_DMA1_7_START_ADDR(val) bfin_write32(DMA1_7_START_ADDR,val)
+#define bfin_read_DMA1_7_X_COUNT() bfin_read16(DMA1_7_X_COUNT)
+#define bfin_write_DMA1_7_X_COUNT(val) bfin_write16(DMA1_7_X_COUNT,val)
+#define bfin_read_DMA1_7_Y_COUNT() bfin_read16(DMA1_7_Y_COUNT)
+#define bfin_write_DMA1_7_Y_COUNT(val) bfin_write16(DMA1_7_Y_COUNT,val)
+#define bfin_read_DMA1_7_X_MODIFY() bfin_read16(DMA1_7_X_MODIFY)
+#define bfin_write_DMA1_7_X_MODIFY(val) bfin_write16(DMA1_7_X_MODIFY,val)
+#define bfin_read_DMA1_7_Y_MODIFY() bfin_read16(DMA1_7_Y_MODIFY)
+#define bfin_write_DMA1_7_Y_MODIFY(val) bfin_write16(DMA1_7_Y_MODIFY,val)
+#define bfin_read_DMA1_7_CURR_DESC_PTR() bfin_read32(DMA1_7_CURR_DESC_PTR)
+#define bfin_write_DMA1_7_CURR_DESC_PTR(val) bfin_write32(DMA1_7_CURR_DESC_PTR,val)
+#define bfin_read_DMA1_7_CURR_ADDR() bfin_read32(DMA1_7_CURR_ADDR)
+#define bfin_write_DMA1_7_CURR_ADDR(val) bfin_write32(DMA1_7_CURR_ADDR,val)
+#define bfin_read_DMA1_7_CURR_X_COUNT() bfin_read16(DMA1_7_CURR_X_COUNT)
+#define bfin_write_DMA1_7_CURR_X_COUNT(val) bfin_write16(DMA1_7_CURR_X_COUNT,val)
+#define bfin_read_DMA1_7_CURR_Y_COUNT() bfin_read16(DMA1_7_CURR_Y_COUNT)
+#define bfin_write_DMA1_7_CURR_Y_COUNT(val) bfin_write16(DMA1_7_CURR_Y_COUNT,val)
+#define bfin_read_DMA1_7_IRQ_STATUS() bfin_read16(DMA1_7_IRQ_STATUS)
+#define bfin_write_DMA1_7_IRQ_STATUS(val) bfin_write16(DMA1_7_IRQ_STATUS,val)
+#define bfin_read_DMA1_7_PERIPHERAL_MAP() bfin_read16(DMA1_7_PERIPHERAL_MAP)
+#define bfin_write_DMA1_7_PERIPHERAL_MAP(val) bfin_write16(DMA1_7_PERIPHERAL_MAP,val)
+#define bfin_read_DMA1_8_CONFIG() bfin_read16(DMA1_8_CONFIG)
+#define bfin_write_DMA1_8_CONFIG(val) bfin_write16(DMA1_8_CONFIG,val)
+#define bfin_read_DMA1_8_NEXT_DESC_PTR() bfin_read32(DMA1_8_NEXT_DESC_PTR)
+#define bfin_write_DMA1_8_NEXT_DESC_PTR(val) bfin_write32(DMA1_8_NEXT_DESC_PTR,val)
+#define bfin_read_DMA1_8_START_ADDR() bfin_read32(DMA1_8_START_ADDR)
+#define bfin_write_DMA1_8_START_ADDR(val) bfin_write32(DMA1_8_START_ADDR,val)
+#define bfin_read_DMA1_8_X_COUNT() bfin_read16(DMA1_8_X_COUNT)
+#define bfin_write_DMA1_8_X_COUNT(val) bfin_write16(DMA1_8_X_COUNT,val)
+#define bfin_read_DMA1_8_Y_COUNT() bfin_read16(DMA1_8_Y_COUNT)
+#define bfin_write_DMA1_8_Y_COUNT(val) bfin_write16(DMA1_8_Y_COUNT,val)
+#define bfin_read_DMA1_8_X_MODIFY() bfin_read16(DMA1_8_X_MODIFY)
+#define bfin_write_DMA1_8_X_MODIFY(val) bfin_write16(DMA1_8_X_MODIFY,val)
+#define bfin_read_DMA1_8_Y_MODIFY() bfin_read16(DMA1_8_Y_MODIFY)
+#define bfin_write_DMA1_8_Y_MODIFY(val) bfin_write16(DMA1_8_Y_MODIFY,val)
+#define bfin_read_DMA1_8_CURR_DESC_PTR() bfin_read32(DMA1_8_CURR_DESC_PTR)
+#define bfin_write_DMA1_8_CURR_DESC_PTR(val) bfin_write32(DMA1_8_CURR_DESC_PTR,val)
+#define bfin_read_DMA1_8_CURR_ADDR() bfin_read32(DMA1_8_CURR_ADDR)
+#define bfin_write_DMA1_8_CURR_ADDR(val) bfin_write32(DMA1_8_CURR_ADDR,val)
+#define bfin_read_DMA1_8_CURR_X_COUNT() bfin_read16(DMA1_8_CURR_X_COUNT)
+#define bfin_write_DMA1_8_CURR_X_COUNT(val) bfin_write16(DMA1_8_CURR_X_COUNT,val)
+#define bfin_read_DMA1_8_CURR_Y_COUNT() bfin_read16(DMA1_8_CURR_Y_COUNT)
+#define bfin_write_DMA1_8_CURR_Y_COUNT(val) bfin_write16(DMA1_8_CURR_Y_COUNT,val)
+#define bfin_read_DMA1_8_IRQ_STATUS() bfin_read16(DMA1_8_IRQ_STATUS)
+#define bfin_write_DMA1_8_IRQ_STATUS(val) bfin_write16(DMA1_8_IRQ_STATUS,val)
+#define bfin_read_DMA1_8_PERIPHERAL_MAP() bfin_read16(DMA1_8_PERIPHERAL_MAP)
+#define bfin_write_DMA1_8_PERIPHERAL_MAP(val) bfin_write16(DMA1_8_PERIPHERAL_MAP,val)
+#define bfin_read_DMA1_9_CONFIG() bfin_read16(DMA1_9_CONFIG)
+#define bfin_write_DMA1_9_CONFIG(val) bfin_write16(DMA1_9_CONFIG,val)
+#define bfin_read_DMA1_9_NEXT_DESC_PTR() bfin_read32(DMA1_9_NEXT_DESC_PTR)
+#define bfin_write_DMA1_9_NEXT_DESC_PTR(val) bfin_write32(DMA1_9_NEXT_DESC_PTR,val)
+#define bfin_read_DMA1_9_START_ADDR() bfin_read32(DMA1_9_START_ADDR)
+#define bfin_write_DMA1_9_START_ADDR(val) bfin_write32(DMA1_9_START_ADDR,val)
+#define bfin_read_DMA1_9_X_COUNT() bfin_read16(DMA1_9_X_COUNT)
+#define bfin_write_DMA1_9_X_COUNT(val) bfin_write16(DMA1_9_X_COUNT,val)
+#define bfin_read_DMA1_9_Y_COUNT() bfin_read16(DMA1_9_Y_COUNT)
+#define bfin_write_DMA1_9_Y_COUNT(val) bfin_write16(DMA1_9_Y_COUNT,val)
+#define bfin_read_DMA1_9_X_MODIFY() bfin_read16(DMA1_9_X_MODIFY)
+#define bfin_write_DMA1_9_X_MODIFY(val) bfin_write16(DMA1_9_X_MODIFY,val)
+#define bfin_read_DMA1_9_Y_MODIFY() bfin_read16(DMA1_9_Y_MODIFY)
+#define bfin_write_DMA1_9_Y_MODIFY(val) bfin_write16(DMA1_9_Y_MODIFY,val)
+#define bfin_read_DMA1_9_CURR_DESC_PTR() bfin_read32(DMA1_9_CURR_DESC_PTR)
+#define bfin_write_DMA1_9_CURR_DESC_PTR(val) bfin_write32(DMA1_9_CURR_DESC_PTR,val)
+#define bfin_read_DMA1_9_CURR_ADDR() bfin_read32(DMA1_9_CURR_ADDR)
+#define bfin_write_DMA1_9_CURR_ADDR(val) bfin_write32(DMA1_9_CURR_ADDR,val)
+#define bfin_read_DMA1_9_CURR_X_COUNT() bfin_read16(DMA1_9_CURR_X_COUNT)
+#define bfin_write_DMA1_9_CURR_X_COUNT(val) bfin_write16(DMA1_9_CURR_X_COUNT,val)
+#define bfin_read_DMA1_9_CURR_Y_COUNT() bfin_read16(DMA1_9_CURR_Y_COUNT)
+#define bfin_write_DMA1_9_CURR_Y_COUNT(val) bfin_write16(DMA1_9_CURR_Y_COUNT,val)
+#define bfin_read_DMA1_9_IRQ_STATUS() bfin_read16(DMA1_9_IRQ_STATUS)
+#define bfin_write_DMA1_9_IRQ_STATUS(val) bfin_write16(DMA1_9_IRQ_STATUS,val)
+#define bfin_read_DMA1_9_PERIPHERAL_MAP() bfin_read16(DMA1_9_PERIPHERAL_MAP)
+#define bfin_write_DMA1_9_PERIPHERAL_MAP(val) bfin_write16(DMA1_9_PERIPHERAL_MAP,val)
+#define bfin_read_DMA1_10_CONFIG() bfin_read16(DMA1_10_CONFIG)
+#define bfin_write_DMA1_10_CONFIG(val) bfin_write16(DMA1_10_CONFIG,val)
+#define bfin_read_DMA1_10_NEXT_DESC_PTR() bfin_read32(DMA1_10_NEXT_DESC_PTR)
+#define bfin_write_DMA1_10_NEXT_DESC_PTR(val) bfin_write32(DMA1_10_NEXT_DESC_PTR,val)
+#define bfin_read_DMA1_10_START_ADDR() bfin_read32(DMA1_10_START_ADDR)
+#define bfin_write_DMA1_10_START_ADDR(val) bfin_write32(DMA1_10_START_ADDR,val)
+#define bfin_read_DMA1_10_X_COUNT() bfin_read16(DMA1_10_X_COUNT)
+#define bfin_write_DMA1_10_X_COUNT(val) bfin_write16(DMA1_10_X_COUNT,val)
+#define bfin_read_DMA1_10_Y_COUNT() bfin_read16(DMA1_10_Y_COUNT)
+#define bfin_write_DMA1_10_Y_COUNT(val) bfin_write16(DMA1_10_Y_COUNT,val)
+#define bfin_read_DMA1_10_X_MODIFY() bfin_read16(DMA1_10_X_MODIFY)
+#define bfin_write_DMA1_10_X_MODIFY(val) bfin_write16(DMA1_10_X_MODIFY,val)
+#define bfin_read_DMA1_10_Y_MODIFY() bfin_read16(DMA1_10_Y_MODIFY)
+#define bfin_write_DMA1_10_Y_MODIFY(val) bfin_write16(DMA1_10_Y_MODIFY,val)
+#define bfin_read_DMA1_10_CURR_DESC_PTR() bfin_read32(DMA1_10_CURR_DESC_PTR)
+#define bfin_write_DMA1_10_CURR_DESC_PTR(val) bfin_write32(DMA1_10_CURR_DESC_PTR,val)
+#define bfin_read_DMA1_10_CURR_ADDR() bfin_read32(DMA1_10_CURR_ADDR)
+#define bfin_write_DMA1_10_CURR_ADDR(val) bfin_write32(DMA1_10_CURR_ADDR,val)
+#define bfin_read_DMA1_10_CURR_X_COUNT() bfin_read16(DMA1_10_CURR_X_COUNT)
+#define bfin_write_DMA1_10_CURR_X_COUNT(val) bfin_write16(DMA1_10_CURR_X_COUNT,val)
+#define bfin_read_DMA1_10_CURR_Y_COUNT() bfin_read16(DMA1_10_CURR_Y_COUNT)
+#define bfin_write_DMA1_10_CURR_Y_COUNT(val) bfin_write16(DMA1_10_CURR_Y_COUNT,val)
+#define bfin_read_DMA1_10_IRQ_STATUS() bfin_read16(DMA1_10_IRQ_STATUS)
+#define bfin_write_DMA1_10_IRQ_STATUS(val) bfin_write16(DMA1_10_IRQ_STATUS,val)
+#define bfin_read_DMA1_10_PERIPHERAL_MAP() bfin_read16(DMA1_10_PERIPHERAL_MAP)
+#define bfin_write_DMA1_10_PERIPHERAL_MAP(val) bfin_write16(DMA1_10_PERIPHERAL_MAP,val)
+#define bfin_read_DMA1_11_CONFIG() bfin_read16(DMA1_11_CONFIG)
+#define bfin_write_DMA1_11_CONFIG(val) bfin_write16(DMA1_11_CONFIG,val)
+#define bfin_read_DMA1_11_NEXT_DESC_PTR() bfin_read32(DMA1_11_NEXT_DESC_PTR)
+#define bfin_write_DMA1_11_NEXT_DESC_PTR(val) bfin_write32(DMA1_11_NEXT_DESC_PTR,val)
+#define bfin_read_DMA1_11_START_ADDR() bfin_read32(DMA1_11_START_ADDR)
+#define bfin_write_DMA1_11_START_ADDR(val) bfin_write32(DMA1_11_START_ADDR,val)
+#define bfin_read_DMA1_11_X_COUNT() bfin_read16(DMA1_11_X_COUNT)
+#define bfin_write_DMA1_11_X_COUNT(val) bfin_write16(DMA1_11_X_COUNT,val)
+#define bfin_read_DMA1_11_Y_COUNT() bfin_read16(DMA1_11_Y_COUNT)
+#define bfin_write_DMA1_11_Y_COUNT(val) bfin_write16(DMA1_11_Y_COUNT,val)
+#define bfin_read_DMA1_11_X_MODIFY() bfin_read16(DMA1_11_X_MODIFY)
+#define bfin_write_DMA1_11_X_MODIFY(val) bfin_write16(DMA1_11_X_MODIFY,val)
+#define bfin_read_DMA1_11_Y_MODIFY() bfin_read16(DMA1_11_Y_MODIFY)
+#define bfin_write_DMA1_11_Y_MODIFY(val) bfin_write16(DMA1_11_Y_MODIFY,val)
+#define bfin_read_DMA1_11_CURR_DESC_PTR() bfin_read32(DMA1_11_CURR_DESC_PTR)
+#define bfin_write_DMA1_11_CURR_DESC_PTR(val) bfin_write32(DMA1_11_CURR_DESC_PTR,val)
+#define bfin_read_DMA1_11_CURR_ADDR() bfin_read32(DMA1_11_CURR_ADDR)
+#define bfin_write_DMA1_11_CURR_ADDR(val) bfin_write32(DMA1_11_CURR_ADDR,val)
+#define bfin_read_DMA1_11_CURR_X_COUNT() bfin_read16(DMA1_11_CURR_X_COUNT)
+#define bfin_write_DMA1_11_CURR_X_COUNT(val) bfin_write16(DMA1_11_CURR_X_COUNT,val)
+#define bfin_read_DMA1_11_CURR_Y_COUNT() bfin_read16(DMA1_11_CURR_Y_COUNT)
+#define bfin_write_DMA1_11_CURR_Y_COUNT(val) bfin_write16(DMA1_11_CURR_Y_COUNT,val)
+#define bfin_read_DMA1_11_IRQ_STATUS() bfin_read16(DMA1_11_IRQ_STATUS)
+#define bfin_write_DMA1_11_IRQ_STATUS(val) bfin_write16(DMA1_11_IRQ_STATUS,val)
+#define bfin_read_DMA1_11_PERIPHERAL_MAP() bfin_read16(DMA1_11_PERIPHERAL_MAP)
+#define bfin_write_DMA1_11_PERIPHERAL_MAP(val) bfin_write16(DMA1_11_PERIPHERAL_MAP,val)
+/* Memory DMA1 Controller registers (0xFFC0 1E80-0xFFC0 1FFF) */
+#define bfin_read_MDMA1_D0_CONFIG() bfin_read16(MDMA1_D0_CONFIG)
+#define bfin_write_MDMA1_D0_CONFIG(val) bfin_write16(MDMA1_D0_CONFIG,val)
+#define bfin_read_MDMA1_D0_NEXT_DESC_PTR() bfin_read32(MDMA1_D0_NEXT_DESC_PTR)
+#define bfin_write_MDMA1_D0_NEXT_DESC_PTR(val) bfin_write32(MDMA1_D0_NEXT_DESC_PTR,val)
+#define bfin_read_MDMA1_D0_START_ADDR() bfin_read32(MDMA1_D0_START_ADDR)
+#define bfin_write_MDMA1_D0_START_ADDR(val) bfin_write32(MDMA1_D0_START_ADDR,val)
+#define bfin_read_MDMA1_D0_X_COUNT() bfin_read16(MDMA1_D0_X_COUNT)
+#define bfin_write_MDMA1_D0_X_COUNT(val) bfin_write16(MDMA1_D0_X_COUNT,val)
+#define bfin_read_MDMA1_D0_Y_COUNT() bfin_read16(MDMA1_D0_Y_COUNT)
+#define bfin_write_MDMA1_D0_Y_COUNT(val) bfin_write16(MDMA1_D0_Y_COUNT,val)
+#define bfin_read_MDMA1_D0_X_MODIFY() bfin_read16(MDMA1_D0_X_MODIFY)
+#define bfin_write_MDMA1_D0_X_MODIFY(val) bfin_write16(MDMA1_D0_X_MODIFY,val)
+#define bfin_read_MDMA1_D0_Y_MODIFY() bfin_read16(MDMA1_D0_Y_MODIFY)
+#define bfin_write_MDMA1_D0_Y_MODIFY(val) bfin_write16(MDMA1_D0_Y_MODIFY,val)
+#define bfin_read_MDMA1_D0_CURR_DESC_PTR() bfin_read32(MDMA1_D0_CURR_DESC_PTR)
+#define bfin_write_MDMA1_D0_CURR_DESC_PTR(val) bfin_write32(MDMA1_D0_CURR_DESC_PTR,val)
+#define bfin_read_MDMA1_D0_CURR_ADDR() bfin_read32(MDMA1_D0_CURR_ADDR)
+#define bfin_write_MDMA1_D0_CURR_ADDR(val) bfin_write32(MDMA1_D0_CURR_ADDR,val)
+#define bfin_read_MDMA1_D0_CURR_X_COUNT() bfin_read16(MDMA1_D0_CURR_X_COUNT)
+#define bfin_write_MDMA1_D0_CURR_X_COUNT(val) bfin_write16(MDMA1_D0_CURR_X_COUNT,val)
+#define bfin_read_MDMA1_D0_CURR_Y_COUNT() bfin_read16(MDMA1_D0_CURR_Y_COUNT)
+#define bfin_write_MDMA1_D0_CURR_Y_COUNT(val) bfin_write16(MDMA1_D0_CURR_Y_COUNT,val)
+#define bfin_read_MDMA1_D0_IRQ_STATUS() bfin_read16(MDMA1_D0_IRQ_STATUS)
+#define bfin_write_MDMA1_D0_IRQ_STATUS(val) bfin_write16(MDMA1_D0_IRQ_STATUS,val)
+#define bfin_read_MDMA1_D0_PERIPHERAL_MAP() bfin_read16(MDMA1_D0_PERIPHERAL_MAP)
+#define bfin_write_MDMA1_D0_PERIPHERAL_MAP(val) bfin_write16(MDMA1_D0_PERIPHERAL_MAP,val)
+#define bfin_read_MDMA1_S0_CONFIG() bfin_read16(MDMA1_S0_CONFIG)
+#define bfin_write_MDMA1_S0_CONFIG(val) bfin_write16(MDMA1_S0_CONFIG,val)
+#define bfin_read_MDMA1_S0_NEXT_DESC_PTR() bfin_read32(MDMA1_S0_NEXT_DESC_PTR)
+#define bfin_write_MDMA1_S0_NEXT_DESC_PTR(val) bfin_write32(MDMA1_S0_NEXT_DESC_PTR,val)
+#define bfin_read_MDMA1_S0_START_ADDR() bfin_read32(MDMA1_S0_START_ADDR)
+#define bfin_write_MDMA1_S0_START_ADDR(val) bfin_write32(MDMA1_S0_START_ADDR,val)
+#define bfin_read_MDMA1_S0_X_COUNT() bfin_read16(MDMA1_S0_X_COUNT)
+#define bfin_write_MDMA1_S0_X_COUNT(val) bfin_write16(MDMA1_S0_X_COUNT,val)
+#define bfin_read_MDMA1_S0_Y_COUNT() bfin_read16(MDMA1_S0_Y_COUNT)
+#define bfin_write_MDMA1_S0_Y_COUNT(val) bfin_write16(MDMA1_S0_Y_COUNT,val)
+#define bfin_read_MDMA1_S0_X_MODIFY() bfin_read16(MDMA1_S0_X_MODIFY)
+#define bfin_write_MDMA1_S0_X_MODIFY(val) bfin_write16(MDMA1_S0_X_MODIFY,val)
+#define bfin_read_MDMA1_S0_Y_MODIFY() bfin_read16(MDMA1_S0_Y_MODIFY)
+#define bfin_write_MDMA1_S0_Y_MODIFY(val) bfin_write16(MDMA1_S0_Y_MODIFY,val)
+#define bfin_read_MDMA1_S0_CURR_DESC_PTR() bfin_read32(MDMA1_S0_CURR_DESC_PTR)
+#define bfin_write_MDMA1_S0_CURR_DESC_PTR(val) bfin_write32(MDMA1_S0_CURR_DESC_PTR,val)
+#define bfin_read_MDMA1_S0_CURR_ADDR() bfin_read32(MDMA1_S0_CURR_ADDR)
+#define bfin_write_MDMA1_S0_CURR_ADDR(val) bfin_write32(MDMA1_S0_CURR_ADDR,val)
+#define bfin_read_MDMA1_S0_CURR_X_COUNT() bfin_read16(MDMA1_S0_CURR_X_COUNT)
+#define bfin_write_MDMA1_S0_CURR_X_COUNT(val) bfin_write16(MDMA1_S0_CURR_X_COUNT,val)
+#define bfin_read_MDMA1_S0_CURR_Y_COUNT() bfin_read16(MDMA1_S0_CURR_Y_COUNT)
+#define bfin_write_MDMA1_S0_CURR_Y_COUNT(val) bfin_write16(MDMA1_S0_CURR_Y_COUNT,val)
+#define bfin_read_MDMA1_S0_IRQ_STATUS() bfin_read16(MDMA1_S0_IRQ_STATUS)
+#define bfin_write_MDMA1_S0_IRQ_STATUS(val) bfin_write16(MDMA1_S0_IRQ_STATUS,val)
+#define bfin_read_MDMA1_S0_PERIPHERAL_MAP() bfin_read16(MDMA1_S0_PERIPHERAL_MAP)
+#define bfin_write_MDMA1_S0_PERIPHERAL_MAP(val) bfin_write16(MDMA1_S0_PERIPHERAL_MAP,val)
+#define bfin_read_MDMA1_D1_CONFIG() bfin_read16(MDMA1_D1_CONFIG)
+#define bfin_write_MDMA1_D1_CONFIG(val) bfin_write16(MDMA1_D1_CONFIG,val)
+#define bfin_read_MDMA1_D1_NEXT_DESC_PTR() bfin_read32(MDMA1_D1_NEXT_DESC_PTR)
+#define bfin_write_MDMA1_D1_NEXT_DESC_PTR(val) bfin_write32(MDMA1_D1_NEXT_DESC_PTR,val)
+#define bfin_read_MDMA1_D1_START_ADDR() bfin_read32(MDMA1_D1_START_ADDR)
+#define bfin_write_MDMA1_D1_START_ADDR(val) bfin_write32(MDMA1_D1_START_ADDR,val)
+#define bfin_read_MDMA1_D1_X_COUNT() bfin_read16(MDMA1_D1_X_COUNT)
+#define bfin_write_MDMA1_D1_X_COUNT(val) bfin_write16(MDMA1_D1_X_COUNT,val)
+#define bfin_read_MDMA1_D1_Y_COUNT() bfin_read16(MDMA1_D1_Y_COUNT)
+#define bfin_write_MDMA1_D1_Y_COUNT(val) bfin_write16(MDMA1_D1_Y_COUNT,val)
+#define bfin_read_MDMA1_D1_X_MODIFY() bfin_read16(MDMA1_D1_X_MODIFY)
+#define bfin_write_MDMA1_D1_X_MODIFY(val) bfin_write16(MDMA1_D1_X_MODIFY,val)
+#define bfin_read_MDMA1_D1_Y_MODIFY() bfin_read16(MDMA1_D1_Y_MODIFY)
+#define bfin_write_MDMA1_D1_Y_MODIFY(val) bfin_write16(MDMA1_D1_Y_MODIFY,val)
+#define bfin_read_MDMA1_D1_CURR_DESC_PTR() bfin_read32(MDMA1_D1_CURR_DESC_PTR)
+#define bfin_write_MDMA1_D1_CURR_DESC_PTR(val) bfin_write32(MDMA1_D1_CURR_DESC_PTR,val)
+#define bfin_read_MDMA1_D1_CURR_ADDR() bfin_read32(MDMA1_D1_CURR_ADDR)
+#define bfin_write_MDMA1_D1_CURR_ADDR(val) bfin_write32(MDMA1_D1_CURR_ADDR,val)
+#define bfin_read_MDMA1_D1_CURR_X_COUNT() bfin_read16(MDMA1_D1_CURR_X_COUNT)
+#define bfin_write_MDMA1_D1_CURR_X_COUNT(val) bfin_write16(MDMA1_D1_CURR_X_COUNT,val)
+#define bfin_read_MDMA1_D1_CURR_Y_COUNT() bfin_read16(MDMA1_D1_CURR_Y_COUNT)
+#define bfin_write_MDMA1_D1_CURR_Y_COUNT(val) bfin_write16(MDMA1_D1_CURR_Y_COUNT,val)
+#define bfin_read_MDMA1_D1_IRQ_STATUS() bfin_read16(MDMA1_D1_IRQ_STATUS)
+#define bfin_write_MDMA1_D1_IRQ_STATUS(val) bfin_write16(MDMA1_D1_IRQ_STATUS,val)
+#define bfin_read_MDMA1_D1_PERIPHERAL_MAP() bfin_read16(MDMA1_D1_PERIPHERAL_MAP)
+#define bfin_write_MDMA1_D1_PERIPHERAL_MAP(val) bfin_write16(MDMA1_D1_PERIPHERAL_MAP,val)
+#define bfin_read_MDMA1_S1_CONFIG() bfin_read16(MDMA1_S1_CONFIG)
+#define bfin_write_MDMA1_S1_CONFIG(val) bfin_write16(MDMA1_S1_CONFIG,val)
+#define bfin_read_MDMA1_S1_NEXT_DESC_PTR() bfin_read32(MDMA1_S1_NEXT_DESC_PTR)
+#define bfin_write_MDMA1_S1_NEXT_DESC_PTR(val) bfin_write32(MDMA1_S1_NEXT_DESC_PTR,val)
+#define bfin_read_MDMA1_S1_START_ADDR() bfin_read32(MDMA1_S1_START_ADDR)
+#define bfin_write_MDMA1_S1_START_ADDR(val) bfin_write32(MDMA1_S1_START_ADDR,val)
+#define bfin_read_MDMA1_S1_X_COUNT() bfin_read16(MDMA1_S1_X_COUNT)
+#define bfin_write_MDMA1_S1_X_COUNT(val) bfin_write16(MDMA1_S1_X_COUNT,val)
+#define bfin_read_MDMA1_S1_Y_COUNT() bfin_read16(MDMA1_S1_Y_COUNT)
+#define bfin_write_MDMA1_S1_Y_COUNT(val) bfin_write16(MDMA1_S1_Y_COUNT,val)
+#define bfin_read_MDMA1_S1_X_MODIFY() bfin_read16(MDMA1_S1_X_MODIFY)
+#define bfin_write_MDMA1_S1_X_MODIFY(val) bfin_write16(MDMA1_S1_X_MODIFY,val)
+#define bfin_read_MDMA1_S1_Y_MODIFY() bfin_read16(MDMA1_S1_Y_MODIFY)
+#define bfin_write_MDMA1_S1_Y_MODIFY(val) bfin_write16(MDMA1_S1_Y_MODIFY,val)
+#define bfin_read_MDMA1_S1_CURR_DESC_PTR() bfin_read32(MDMA1_S1_CURR_DESC_PTR)
+#define bfin_write_MDMA1_S1_CURR_DESC_PTR(val) bfin_write32(MDMA1_S1_CURR_DESC_PTR,val)
+#define bfin_read_MDMA1_S1_CURR_ADDR() bfin_read32(MDMA1_S1_CURR_ADDR)
+#define bfin_write_MDMA1_S1_CURR_ADDR(val) bfin_write32(MDMA1_S1_CURR_ADDR,val)
+#define bfin_read_MDMA1_S1_CURR_X_COUNT() bfin_read16(MDMA1_S1_CURR_X_COUNT)
+#define bfin_write_MDMA1_S1_CURR_X_COUNT(val) bfin_write16(MDMA1_S1_CURR_X_COUNT,val)
+#define bfin_read_MDMA1_S1_CURR_Y_COUNT() bfin_read16(MDMA1_S1_CURR_Y_COUNT)
+#define bfin_write_MDMA1_S1_CURR_Y_COUNT(val) bfin_write16(MDMA1_S1_CURR_Y_COUNT,val)
+#define bfin_read_MDMA1_S1_IRQ_STATUS() bfin_read16(MDMA1_S1_IRQ_STATUS)
+#define bfin_write_MDMA1_S1_IRQ_STATUS(val) bfin_write16(MDMA1_S1_IRQ_STATUS,val)
+#define bfin_read_MDMA1_S1_PERIPHERAL_MAP() bfin_read16(MDMA1_S1_PERIPHERAL_MAP)
+#define bfin_write_MDMA1_S1_PERIPHERAL_MAP(val) bfin_write16(MDMA1_S1_PERIPHERAL_MAP,val)
+/* DMA2 Controller registers (0xFFC0 0C00-0xFFC0 0DFF) */
+#define bfin_read_DMA2_0_CONFIG() bfin_read16(DMA2_0_CONFIG)
+#define bfin_write_DMA2_0_CONFIG(val) bfin_write16(DMA2_0_CONFIG,val)
+#define bfin_read_DMA2_0_NEXT_DESC_PTR() bfin_read32(DMA2_0_NEXT_DESC_PTR)
+#define bfin_write_DMA2_0_NEXT_DESC_PTR(val) bfin_write32(DMA2_0_NEXT_DESC_PTR,val)
+#define bfin_read_DMA2_0_START_ADDR() bfin_read32(DMA2_0_START_ADDR)
+#define bfin_write_DMA2_0_START_ADDR(val) bfin_write32(DMA2_0_START_ADDR,val)
+#define bfin_read_DMA2_0_X_COUNT() bfin_read16(DMA2_0_X_COUNT)
+#define bfin_write_DMA2_0_X_COUNT(val) bfin_write16(DMA2_0_X_COUNT,val)
+#define bfin_read_DMA2_0_Y_COUNT() bfin_read16(DMA2_0_Y_COUNT)
+#define bfin_write_DMA2_0_Y_COUNT(val) bfin_write16(DMA2_0_Y_COUNT,val)
+#define bfin_read_DMA2_0_X_MODIFY() bfin_read16(DMA2_0_X_MODIFY)
+#define bfin_write_DMA2_0_X_MODIFY(val) bfin_write16(DMA2_0_X_MODIFY,val)
+#define bfin_read_DMA2_0_Y_MODIFY() bfin_read16(DMA2_0_Y_MODIFY)
+#define bfin_write_DMA2_0_Y_MODIFY(val) bfin_write16(DMA2_0_Y_MODIFY,val)
+#define bfin_read_DMA2_0_CURR_DESC_PTR() bfin_read32(DMA2_0_CURR_DESC_PTR)
+#define bfin_write_DMA2_0_CURR_DESC_PTR(val) bfin_write32(DMA2_0_CURR_DESC_PTR,val)
+#define bfin_read_DMA2_0_CURR_ADDR() bfin_read32(DMA2_0_CURR_ADDR)
+#define bfin_write_DMA2_0_CURR_ADDR(val) bfin_write32(DMA2_0_CURR_ADDR,val)
+#define bfin_read_DMA2_0_CURR_X_COUNT() bfin_read16(DMA2_0_CURR_X_COUNT)
+#define bfin_write_DMA2_0_CURR_X_COUNT(val) bfin_write16(DMA2_0_CURR_X_COUNT,val)
+#define bfin_read_DMA2_0_CURR_Y_COUNT() bfin_read16(DMA2_0_CURR_Y_COUNT)
+#define bfin_write_DMA2_0_CURR_Y_COUNT(val) bfin_write16(DMA2_0_CURR_Y_COUNT,val)
+#define bfin_read_DMA2_0_IRQ_STATUS() bfin_read16(DMA2_0_IRQ_STATUS)
+#define bfin_write_DMA2_0_IRQ_STATUS(val) bfin_write16(DMA2_0_IRQ_STATUS,val)
+#define bfin_read_DMA2_0_PERIPHERAL_MAP() bfin_read16(DMA2_0_PERIPHERAL_MAP)
+#define bfin_write_DMA2_0_PERIPHERAL_MAP(val) bfin_write16(DMA2_0_PERIPHERAL_MAP,val)
+#define bfin_read_DMA2_1_CONFIG() bfin_read16(DMA2_1_CONFIG)
+#define bfin_write_DMA2_1_CONFIG(val) bfin_write16(DMA2_1_CONFIG,val)
+#define bfin_read_DMA2_1_NEXT_DESC_PTR() bfin_read32(DMA2_1_NEXT_DESC_PTR)
+#define bfin_write_DMA2_1_NEXT_DESC_PTR(val) bfin_write32(DMA2_1_NEXT_DESC_PTR,val)
+#define bfin_read_DMA2_1_START_ADDR() bfin_read32(DMA2_1_START_ADDR)
+#define bfin_write_DMA2_1_START_ADDR(val) bfin_write32(DMA2_1_START_ADDR,val)
+#define bfin_read_DMA2_1_X_COUNT() bfin_read16(DMA2_1_X_COUNT)
+#define bfin_write_DMA2_1_X_COUNT(val) bfin_write16(DMA2_1_X_COUNT,val)
+#define bfin_read_DMA2_1_Y_COUNT() bfin_read16(DMA2_1_Y_COUNT)
+#define bfin_write_DMA2_1_Y_COUNT(val) bfin_write16(DMA2_1_Y_COUNT,val)
+#define bfin_read_DMA2_1_X_MODIFY() bfin_read16(DMA2_1_X_MODIFY)
+#define bfin_write_DMA2_1_X_MODIFY(val) bfin_write16(DMA2_1_X_MODIFY,val)
+#define bfin_read_DMA2_1_Y_MODIFY() bfin_read16(DMA2_1_Y_MODIFY)
+#define bfin_write_DMA2_1_Y_MODIFY(val) bfin_write16(DMA2_1_Y_MODIFY,val)
+#define bfin_read_DMA2_1_CURR_DESC_PTR() bfin_read32(DMA2_1_CURR_DESC_PTR)
+#define bfin_write_DMA2_1_CURR_DESC_PTR(val) bfin_write32(DMA2_1_CURR_DESC_PTR,val)
+#define bfin_read_DMA2_1_CURR_ADDR() bfin_read32(DMA2_1_CURR_ADDR)
+#define bfin_write_DMA2_1_CURR_ADDR(val) bfin_write32(DMA2_1_CURR_ADDR,val)
+#define bfin_read_DMA2_1_CURR_X_COUNT() bfin_read16(DMA2_1_CURR_X_COUNT)
+#define bfin_write_DMA2_1_CURR_X_COUNT(val) bfin_write16(DMA2_1_CURR_X_COUNT,val)
+#define bfin_read_DMA2_1_CURR_Y_COUNT() bfin_read16(DMA2_1_CURR_Y_COUNT)
+#define bfin_write_DMA2_1_CURR_Y_COUNT(val) bfin_write16(DMA2_1_CURR_Y_COUNT,val)
+#define bfin_read_DMA2_1_IRQ_STATUS() bfin_read16(DMA2_1_IRQ_STATUS)
+#define bfin_write_DMA2_1_IRQ_STATUS(val) bfin_write16(DMA2_1_IRQ_STATUS,val)
+#define bfin_read_DMA2_1_PERIPHERAL_MAP() bfin_read16(DMA2_1_PERIPHERAL_MAP)
+#define bfin_write_DMA2_1_PERIPHERAL_MAP(val) bfin_write16(DMA2_1_PERIPHERAL_MAP,val)
+#define bfin_read_DMA2_2_CONFIG() bfin_read16(DMA2_2_CONFIG)
+#define bfin_write_DMA2_2_CONFIG(val) bfin_write16(DMA2_2_CONFIG,val)
+#define bfin_read_DMA2_2_NEXT_DESC_PTR() bfin_read32(DMA2_2_NEXT_DESC_PTR)
+#define bfin_write_DMA2_2_NEXT_DESC_PTR(val) bfin_write32(DMA2_2_NEXT_DESC_PTR,val)
+#define bfin_read_DMA2_2_START_ADDR() bfin_read32(DMA2_2_START_ADDR)
+#define bfin_write_DMA2_2_START_ADDR(val) bfin_write32(DMA2_2_START_ADDR,val)
+#define bfin_read_DMA2_2_X_COUNT() bfin_read16(DMA2_2_X_COUNT)
+#define bfin_write_DMA2_2_X_COUNT(val) bfin_write16(DMA2_2_X_COUNT,val)
+#define bfin_read_DMA2_2_Y_COUNT() bfin_read16(DMA2_2_Y_COUNT)
+#define bfin_write_DMA2_2_Y_COUNT(val) bfin_write16(DMA2_2_Y_COUNT,val)
+#define bfin_read_DMA2_2_X_MODIFY() bfin_read16(DMA2_2_X_MODIFY)
+#define bfin_write_DMA2_2_X_MODIFY(val) bfin_write16(DMA2_2_X_MODIFY,val)
+#define bfin_read_DMA2_2_Y_MODIFY() bfin_read16(DMA2_2_Y_MODIFY)
+#define bfin_write_DMA2_2_Y_MODIFY(val) bfin_write16(DMA2_2_Y_MODIFY,val)
+#define bfin_read_DMA2_2_CURR_DESC_PTR() bfin_read32(DMA2_2_CURR_DESC_PTR)
+#define bfin_write_DMA2_2_CURR_DESC_PTR(val) bfin_write32(DMA2_2_CURR_DESC_PTR,val)
+#define bfin_read_DMA2_2_CURR_ADDR() bfin_read32(DMA2_2_CURR_ADDR)
+#define bfin_write_DMA2_2_CURR_ADDR(val) bfin_write32(DMA2_2_CURR_ADDR,val)
+#define bfin_read_DMA2_2_CURR_X_COUNT() bfin_read16(DMA2_2_CURR_X_COUNT)
+#define bfin_write_DMA2_2_CURR_X_COUNT(val) bfin_write16(DMA2_2_CURR_X_COUNT,val)
+#define bfin_read_DMA2_2_CURR_Y_COUNT() bfin_read16(DMA2_2_CURR_Y_COUNT)
+#define bfin_write_DMA2_2_CURR_Y_COUNT(val) bfin_write16(DMA2_2_CURR_Y_COUNT,val)
+#define bfin_read_DMA2_2_IRQ_STATUS() bfin_read16(DMA2_2_IRQ_STATUS)
+#define bfin_write_DMA2_2_IRQ_STATUS(val) bfin_write16(DMA2_2_IRQ_STATUS,val)
+#define bfin_read_DMA2_2_PERIPHERAL_MAP() bfin_read16(DMA2_2_PERIPHERAL_MAP)
+#define bfin_write_DMA2_2_PERIPHERAL_MAP(val) bfin_write16(DMA2_2_PERIPHERAL_MAP,val)
+#define bfin_read_DMA2_3_CONFIG() bfin_read16(DMA2_3_CONFIG)
+#define bfin_write_DMA2_3_CONFIG(val) bfin_write16(DMA2_3_CONFIG,val)
+#define bfin_read_DMA2_3_NEXT_DESC_PTR() bfin_read32(DMA2_3_NEXT_DESC_PTR)
+#define bfin_write_DMA2_3_NEXT_DESC_PTR(val) bfin_write32(DMA2_3_NEXT_DESC_PTR,val)
+#define bfin_read_DMA2_3_START_ADDR() bfin_read32(DMA2_3_START_ADDR)
+#define bfin_write_DMA2_3_START_ADDR(val) bfin_write32(DMA2_3_START_ADDR,val)
+#define bfin_read_DMA2_3_X_COUNT() bfin_read16(DMA2_3_X_COUNT)
+#define bfin_write_DMA2_3_X_COUNT(val) bfin_write16(DMA2_3_X_COUNT,val)
+#define bfin_read_DMA2_3_Y_COUNT() bfin_read16(DMA2_3_Y_COUNT)
+#define bfin_write_DMA2_3_Y_COUNT(val) bfin_write16(DMA2_3_Y_COUNT,val)
+#define bfin_read_DMA2_3_X_MODIFY() bfin_read16(DMA2_3_X_MODIFY)
+#define bfin_write_DMA2_3_X_MODIFY(val) bfin_write16(DMA2_3_X_MODIFY,val)
+#define bfin_read_DMA2_3_Y_MODIFY() bfin_read16(DMA2_3_Y_MODIFY)
+#define bfin_write_DMA2_3_Y_MODIFY(val) bfin_write16(DMA2_3_Y_MODIFY,val)
+#define bfin_read_DMA2_3_CURR_DESC_PTR() bfin_read32(DMA2_3_CURR_DESC_PTR)
+#define bfin_write_DMA2_3_CURR_DESC_PTR(val) bfin_write32(DMA2_3_CURR_DESC_PTR,val)
+#define bfin_read_DMA2_3_CURR_ADDR() bfin_read32(DMA2_3_CURR_ADDR)
+#define bfin_write_DMA2_3_CURR_ADDR(val) bfin_write32(DMA2_3_CURR_ADDR,val)
+#define bfin_read_DMA2_3_CURR_X_COUNT() bfin_read16(DMA2_3_CURR_X_COUNT)
+#define bfin_write_DMA2_3_CURR_X_COUNT(val) bfin_write16(DMA2_3_CURR_X_COUNT,val)
+#define bfin_read_DMA2_3_CURR_Y_COUNT() bfin_read16(DMA2_3_CURR_Y_COUNT)
+#define bfin_write_DMA2_3_CURR_Y_COUNT(val) bfin_write16(DMA2_3_CURR_Y_COUNT,val)
+#define bfin_read_DMA2_3_IRQ_STATUS() bfin_read16(DMA2_3_IRQ_STATUS)
+#define bfin_write_DMA2_3_IRQ_STATUS(val) bfin_write16(DMA2_3_IRQ_STATUS,val)
+#define bfin_read_DMA2_3_PERIPHERAL_MAP() bfin_read16(DMA2_3_PERIPHERAL_MAP)
+#define bfin_write_DMA2_3_PERIPHERAL_MAP(val) bfin_write16(DMA2_3_PERIPHERAL_MAP,val)
+#define bfin_read_DMA2_4_CONFIG() bfin_read16(DMA2_4_CONFIG)
+#define bfin_write_DMA2_4_CONFIG(val) bfin_write16(DMA2_4_CONFIG,val)
+#define bfin_read_DMA2_4_NEXT_DESC_PTR() bfin_read32(DMA2_4_NEXT_DESC_PTR)
+#define bfin_write_DMA2_4_NEXT_DESC_PTR(val) bfin_write32(DMA2_4_NEXT_DESC_PTR,val)
+#define bfin_read_DMA2_4_START_ADDR() bfin_read32(DMA2_4_START_ADDR)
+#define bfin_write_DMA2_4_START_ADDR(val) bfin_write32(DMA2_4_START_ADDR,val)
+#define bfin_read_DMA2_4_X_COUNT() bfin_read16(DMA2_4_X_COUNT)
+#define bfin_write_DMA2_4_X_COUNT(val) bfin_write16(DMA2_4_X_COUNT,val)
+#define bfin_read_DMA2_4_Y_COUNT() bfin_read16(DMA2_4_Y_COUNT)
+#define bfin_write_DMA2_4_Y_COUNT(val) bfin_write16(DMA2_4_Y_COUNT,val)
+#define bfin_read_DMA2_4_X_MODIFY() bfin_read16(DMA2_4_X_MODIFY)
+#define bfin_write_DMA2_4_X_MODIFY(val) bfin_write16(DMA2_4_X_MODIFY,val)
+#define bfin_read_DMA2_4_Y_MODIFY() bfin_read16(DMA2_4_Y_MODIFY)
+#define bfin_write_DMA2_4_Y_MODIFY(val) bfin_write16(DMA2_4_Y_MODIFY,val)
+#define bfin_read_DMA2_4_CURR_DESC_PTR() bfin_read32(DMA2_4_CURR_DESC_PTR)
+#define bfin_write_DMA2_4_CURR_DESC_PTR(val) bfin_write32(DMA2_4_CURR_DESC_PTR,val)
+#define bfin_read_DMA2_4_CURR_ADDR() bfin_read32(DMA2_4_CURR_ADDR)
+#define bfin_write_DMA2_4_CURR_ADDR(val) bfin_write32(DMA2_4_CURR_ADDR,val)
+#define bfin_read_DMA2_4_CURR_X_COUNT() bfin_read16(DMA2_4_CURR_X_COUNT)
+#define bfin_write_DMA2_4_CURR_X_COUNT(val) bfin_write16(DMA2_4_CURR_X_COUNT,val)
+#define bfin_read_DMA2_4_CURR_Y_COUNT() bfin_read16(DMA2_4_CURR_Y_COUNT)
+#define bfin_write_DMA2_4_CURR_Y_COUNT(val) bfin_write16(DMA2_4_CURR_Y_COUNT,val)
+#define bfin_read_DMA2_4_IRQ_STATUS() bfin_read16(DMA2_4_IRQ_STATUS)
+#define bfin_write_DMA2_4_IRQ_STATUS(val) bfin_write16(DMA2_4_IRQ_STATUS,val)
+#define bfin_read_DMA2_4_PERIPHERAL_MAP() bfin_read16(DMA2_4_PERIPHERAL_MAP)
+#define bfin_write_DMA2_4_PERIPHERAL_MAP(val) bfin_write16(DMA2_4_PERIPHERAL_MAP,val)
+#define bfin_read_DMA2_5_CONFIG() bfin_read16(DMA2_5_CONFIG)
+#define bfin_write_DMA2_5_CONFIG(val) bfin_write16(DMA2_5_CONFIG,val)
+#define bfin_read_DMA2_5_NEXT_DESC_PTR() bfin_read32(DMA2_5_NEXT_DESC_PTR)
+#define bfin_write_DMA2_5_NEXT_DESC_PTR(val) bfin_write32(DMA2_5_NEXT_DESC_PTR,val)
+#define bfin_read_DMA2_5_START_ADDR() bfin_read32(DMA2_5_START_ADDR)
+#define bfin_write_DMA2_5_START_ADDR(val) bfin_write32(DMA2_5_START_ADDR,val)
+#define bfin_read_DMA2_5_X_COUNT() bfin_read16(DMA2_5_X_COUNT)
+#define bfin_write_DMA2_5_X_COUNT(val) bfin_write16(DMA2_5_X_COUNT,val)
+#define bfin_read_DMA2_5_Y_COUNT() bfin_read16(DMA2_5_Y_COUNT)
+#define bfin_write_DMA2_5_Y_COUNT(val) bfin_write16(DMA2_5_Y_COUNT,val)
+#define bfin_read_DMA2_5_X_MODIFY() bfin_read16(DMA2_5_X_MODIFY)
+#define bfin_write_DMA2_5_X_MODIFY(val) bfin_write16(DMA2_5_X_MODIFY,val)
+#define bfin_read_DMA2_5_Y_MODIFY() bfin_read16(DMA2_5_Y_MODIFY)
+#define bfin_write_DMA2_5_Y_MODIFY(val) bfin_write16(DMA2_5_Y_MODIFY,val)
+#define bfin_read_DMA2_5_CURR_DESC_PTR() bfin_read32(DMA2_5_CURR_DESC_PTR)
+#define bfin_write_DMA2_5_CURR_DESC_PTR(val) bfin_write32(DMA2_5_CURR_DESC_PTR,val)
+#define bfin_read_DMA2_5_CURR_ADDR() bfin_read32(DMA2_5_CURR_ADDR)
+#define bfin_write_DMA2_5_CURR_ADDR(val) bfin_write32(DMA2_5_CURR_ADDR,val)
+#define bfin_read_DMA2_5_CURR_X_COUNT() bfin_read16(DMA2_5_CURR_X_COUNT)
+#define bfin_write_DMA2_5_CURR_X_COUNT(val) bfin_write16(DMA2_5_CURR_X_COUNT,val)
+#define bfin_read_DMA2_5_CURR_Y_COUNT() bfin_read16(DMA2_5_CURR_Y_COUNT)
+#define bfin_write_DMA2_5_CURR_Y_COUNT(val) bfin_write16(DMA2_5_CURR_Y_COUNT,val)
+#define bfin_read_DMA2_5_IRQ_STATUS() bfin_read16(DMA2_5_IRQ_STATUS)
+#define bfin_write_DMA2_5_IRQ_STATUS(val) bfin_write16(DMA2_5_IRQ_STATUS,val)
+#define bfin_read_DMA2_5_PERIPHERAL_MAP() bfin_read16(DMA2_5_PERIPHERAL_MAP)
+#define bfin_write_DMA2_5_PERIPHERAL_MAP(val) bfin_write16(DMA2_5_PERIPHERAL_MAP,val)
+#define bfin_read_DMA2_6_CONFIG() bfin_read16(DMA2_6_CONFIG)
+#define bfin_write_DMA2_6_CONFIG(val) bfin_write16(DMA2_6_CONFIG,val)
+#define bfin_read_DMA2_6_NEXT_DESC_PTR() bfin_read32(DMA2_6_NEXT_DESC_PTR)
+#define bfin_write_DMA2_6_NEXT_DESC_PTR(val) bfin_write32(DMA2_6_NEXT_DESC_PTR,val)
+#define bfin_read_DMA2_6_START_ADDR() bfin_read32(DMA2_6_START_ADDR)
+#define bfin_write_DMA2_6_START_ADDR(val) bfin_write32(DMA2_6_START_ADDR,val)
+#define bfin_read_DMA2_6_X_COUNT() bfin_read16(DMA2_6_X_COUNT)
+#define bfin_write_DMA2_6_X_COUNT(val) bfin_write16(DMA2_6_X_COUNT,val)
+#define bfin_read_DMA2_6_Y_COUNT() bfin_read16(DMA2_6_Y_COUNT)
+#define bfin_write_DMA2_6_Y_COUNT(val) bfin_write16(DMA2_6_Y_COUNT,val)
+#define bfin_read_DMA2_6_X_MODIFY() bfin_read16(DMA2_6_X_MODIFY)
+#define bfin_write_DMA2_6_X_MODIFY(val) bfin_write16(DMA2_6_X_MODIFY,val)
+#define bfin_read_DMA2_6_Y_MODIFY() bfin_read16(DMA2_6_Y_MODIFY)
+#define bfin_write_DMA2_6_Y_MODIFY(val) bfin_write16(DMA2_6_Y_MODIFY,val)
+#define bfin_read_DMA2_6_CURR_DESC_PTR() bfin_read32(DMA2_6_CURR_DESC_PTR)
+#define bfin_write_DMA2_6_CURR_DESC_PTR(val) bfin_write32(DMA2_6_CURR_DESC_PTR,val)
+#define bfin_read_DMA2_6_CURR_ADDR() bfin_read32(DMA2_6_CURR_ADDR)
+#define bfin_write_DMA2_6_CURR_ADDR(val) bfin_write32(DMA2_6_CURR_ADDR,val)
+#define bfin_read_DMA2_6_CURR_X_COUNT() bfin_read16(DMA2_6_CURR_X_COUNT)
+#define bfin_write_DMA2_6_CURR_X_COUNT(val) bfin_write16(DMA2_6_CURR_X_COUNT,val)
+#define bfin_read_DMA2_6_CURR_Y_COUNT() bfin_read16(DMA2_6_CURR_Y_COUNT)
+#define bfin_write_DMA2_6_CURR_Y_COUNT(val) bfin_write16(DMA2_6_CURR_Y_COUNT,val)
+#define bfin_read_DMA2_6_IRQ_STATUS() bfin_read16(DMA2_6_IRQ_STATUS)
+#define bfin_write_DMA2_6_IRQ_STATUS(val) bfin_write16(DMA2_6_IRQ_STATUS,val)
+#define bfin_read_DMA2_6_PERIPHERAL_MAP() bfin_read16(DMA2_6_PERIPHERAL_MAP)
+#define bfin_write_DMA2_6_PERIPHERAL_MAP(val) bfin_write16(DMA2_6_PERIPHERAL_MAP,val)
+#define bfin_read_DMA2_7_CONFIG() bfin_read16(DMA2_7_CONFIG)
+#define bfin_write_DMA2_7_CONFIG(val) bfin_write16(DMA2_7_CONFIG,val)
+#define bfin_read_DMA2_7_NEXT_DESC_PTR() bfin_read32(DMA2_7_NEXT_DESC_PTR)
+#define bfin_write_DMA2_7_NEXT_DESC_PTR(val) bfin_write32(DMA2_7_NEXT_DESC_PTR,val)
+#define bfin_read_DMA2_7_START_ADDR() bfin_read32(DMA2_7_START_ADDR)
+#define bfin_write_DMA2_7_START_ADDR(val) bfin_write32(DMA2_7_START_ADDR,val)
+#define bfin_read_DMA2_7_X_COUNT() bfin_read16(DMA2_7_X_COUNT)
+#define bfin_write_DMA2_7_X_COUNT(val) bfin_write16(DMA2_7_X_COUNT,val)
+#define bfin_read_DMA2_7_Y_COUNT() bfin_read16(DMA2_7_Y_COUNT)
+#define bfin_write_DMA2_7_Y_COUNT(val) bfin_write16(DMA2_7_Y_COUNT,val)
+#define bfin_read_DMA2_7_X_MODIFY() bfin_read16(DMA2_7_X_MODIFY)
+#define bfin_write_DMA2_7_X_MODIFY(val) bfin_write16(DMA2_7_X_MODIFY,val)
+#define bfin_read_DMA2_7_Y_MODIFY() bfin_read16(DMA2_7_Y_MODIFY)
+#define bfin_write_DMA2_7_Y_MODIFY(val) bfin_write16(DMA2_7_Y_MODIFY,val)
+#define bfin_read_DMA2_7_CURR_DESC_PTR() bfin_read32(DMA2_7_CURR_DESC_PTR)
+#define bfin_write_DMA2_7_CURR_DESC_PTR(val) bfin_write32(DMA2_7_CURR_DESC_PTR,val)
+#define bfin_read_DMA2_7_CURR_ADDR() bfin_read32(DMA2_7_CURR_ADDR)
+#define bfin_write_DMA2_7_CURR_ADDR(val) bfin_write32(DMA2_7_CURR_ADDR,val)
+#define bfin_read_DMA2_7_CURR_X_COUNT() bfin_read16(DMA2_7_CURR_X_COUNT)
+#define bfin_write_DMA2_7_CURR_X_COUNT(val) bfin_write16(DMA2_7_CURR_X_COUNT,val)
+#define bfin_read_DMA2_7_CURR_Y_COUNT() bfin_read16(DMA2_7_CURR_Y_COUNT)
+#define bfin_write_DMA2_7_CURR_Y_COUNT(val) bfin_write16(DMA2_7_CURR_Y_COUNT,val)
+#define bfin_read_DMA2_7_IRQ_STATUS() bfin_read16(DMA2_7_IRQ_STATUS)
+#define bfin_write_DMA2_7_IRQ_STATUS(val) bfin_write16(DMA2_7_IRQ_STATUS,val)
+#define bfin_read_DMA2_7_PERIPHERAL_MAP() bfin_read16(DMA2_7_PERIPHERAL_MAP)
+#define bfin_write_DMA2_7_PERIPHERAL_MAP(val) bfin_write16(DMA2_7_PERIPHERAL_MAP,val)
+#define bfin_read_DMA2_8_CONFIG() bfin_read16(DMA2_8_CONFIG)
+#define bfin_write_DMA2_8_CONFIG(val) bfin_write16(DMA2_8_CONFIG,val)
+#define bfin_read_DMA2_8_NEXT_DESC_PTR() bfin_read32(DMA2_8_NEXT_DESC_PTR)
+#define bfin_write_DMA2_8_NEXT_DESC_PTR(val) bfin_write32(DMA2_8_NEXT_DESC_PTR,val)
+#define bfin_read_DMA2_8_START_ADDR() bfin_read32(DMA2_8_START_ADDR)
+#define bfin_write_DMA2_8_START_ADDR(val) bfin_write32(DMA2_8_START_ADDR,val)
+#define bfin_read_DMA2_8_X_COUNT() bfin_read16(DMA2_8_X_COUNT)
+#define bfin_write_DMA2_8_X_COUNT(val) bfin_write16(DMA2_8_X_COUNT,val)
+#define bfin_read_DMA2_8_Y_COUNT() bfin_read16(DMA2_8_Y_COUNT)
+#define bfin_write_DMA2_8_Y_COUNT(val) bfin_write16(DMA2_8_Y_COUNT,val)
+#define bfin_read_DMA2_8_X_MODIFY() bfin_read16(DMA2_8_X_MODIFY)
+#define bfin_write_DMA2_8_X_MODIFY(val) bfin_write16(DMA2_8_X_MODIFY,val)
+#define bfin_read_DMA2_8_Y_MODIFY() bfin_read16(DMA2_8_Y_MODIFY)
+#define bfin_write_DMA2_8_Y_MODIFY(val) bfin_write16(DMA2_8_Y_MODIFY,val)
+#define bfin_read_DMA2_8_CURR_DESC_PTR() bfin_read32(DMA2_8_CURR_DESC_PTR)
+#define bfin_write_DMA2_8_CURR_DESC_PTR(val) bfin_write32(DMA2_8_CURR_DESC_PTR,val)
+#define bfin_read_DMA2_8_CURR_ADDR() bfin_read32(DMA2_8_CURR_ADDR)
+#define bfin_write_DMA2_8_CURR_ADDR(val) bfin_write32(DMA2_8_CURR_ADDR,val)
+#define bfin_read_DMA2_8_CURR_X_COUNT() bfin_read16(DMA2_8_CURR_X_COUNT)
+#define bfin_write_DMA2_8_CURR_X_COUNT(val) bfin_write16(DMA2_8_CURR_X_COUNT,val)
+#define bfin_read_DMA2_8_CURR_Y_COUNT() bfin_read16(DMA2_8_CURR_Y_COUNT)
+#define bfin_write_DMA2_8_CURR_Y_COUNT(val) bfin_write16(DMA2_8_CURR_Y_COUNT,val)
+#define bfin_read_DMA2_8_IRQ_STATUS() bfin_read16(DMA2_8_IRQ_STATUS)
+#define bfin_write_DMA2_8_IRQ_STATUS(val) bfin_write16(DMA2_8_IRQ_STATUS,val)
+#define bfin_read_DMA2_8_PERIPHERAL_MAP() bfin_read16(DMA2_8_PERIPHERAL_MAP)
+#define bfin_write_DMA2_8_PERIPHERAL_MAP(val) bfin_write16(DMA2_8_PERIPHERAL_MAP,val)
+#define bfin_read_DMA2_9_CONFIG() bfin_read16(DMA2_9_CONFIG)
+#define bfin_write_DMA2_9_CONFIG(val) bfin_write16(DMA2_9_CONFIG,val)
+#define bfin_read_DMA2_9_NEXT_DESC_PTR() bfin_read32(DMA2_9_NEXT_DESC_PTR)
+#define bfin_write_DMA2_9_NEXT_DESC_PTR(val) bfin_write32(DMA2_9_NEXT_DESC_PTR,val)
+#define bfin_read_DMA2_9_START_ADDR() bfin_read32(DMA2_9_START_ADDR)
+#define bfin_write_DMA2_9_START_ADDR(val) bfin_write32(DMA2_9_START_ADDR,val)
+#define bfin_read_DMA2_9_X_COUNT() bfin_read16(DMA2_9_X_COUNT)
+#define bfin_write_DMA2_9_X_COUNT(val) bfin_write16(DMA2_9_X_COUNT,val)
+#define bfin_read_DMA2_9_Y_COUNT() bfin_read16(DMA2_9_Y_COUNT)
+#define bfin_write_DMA2_9_Y_COUNT(val) bfin_write16(DMA2_9_Y_COUNT,val)
+#define bfin_read_DMA2_9_X_MODIFY() bfin_read16(DMA2_9_X_MODIFY)
+#define bfin_write_DMA2_9_X_MODIFY(val) bfin_write16(DMA2_9_X_MODIFY,val)
+#define bfin_read_DMA2_9_Y_MODIFY() bfin_read16(DMA2_9_Y_MODIFY)
+#define bfin_write_DMA2_9_Y_MODIFY(val) bfin_write16(DMA2_9_Y_MODIFY,val)
+#define bfin_read_DMA2_9_CURR_DESC_PTR() bfin_read32(DMA2_9_CURR_DESC_PTR)
+#define bfin_write_DMA2_9_CURR_DESC_PTR(val) bfin_write32(DMA2_9_CURR_DESC_PTR,val)
+#define bfin_read_DMA2_9_CURR_ADDR() bfin_read32(DMA2_9_CURR_ADDR)
+#define bfin_write_DMA2_9_CURR_ADDR(val) bfin_write32(DMA2_9_CURR_ADDR,val)
+#define bfin_read_DMA2_9_CURR_X_COUNT() bfin_read16(DMA2_9_CURR_X_COUNT)
+#define bfin_write_DMA2_9_CURR_X_COUNT(val) bfin_write16(DMA2_9_CURR_X_COUNT,val)
+#define bfin_read_DMA2_9_CURR_Y_COUNT() bfin_read16(DMA2_9_CURR_Y_COUNT)
+#define bfin_write_DMA2_9_CURR_Y_COUNT(val) bfin_write16(DMA2_9_CURR_Y_COUNT,val)
+#define bfin_read_DMA2_9_IRQ_STATUS() bfin_read16(DMA2_9_IRQ_STATUS)
+#define bfin_write_DMA2_9_IRQ_STATUS(val) bfin_write16(DMA2_9_IRQ_STATUS,val)
+#define bfin_read_DMA2_9_PERIPHERAL_MAP() bfin_read16(DMA2_9_PERIPHERAL_MAP)
+#define bfin_write_DMA2_9_PERIPHERAL_MAP(val) bfin_write16(DMA2_9_PERIPHERAL_MAP,val)
+#define bfin_read_DMA2_10_CONFIG() bfin_read16(DMA2_10_CONFIG)
+#define bfin_write_DMA2_10_CONFIG(val) bfin_write16(DMA2_10_CONFIG,val)
+#define bfin_read_DMA2_10_NEXT_DESC_PTR() bfin_read32(DMA2_10_NEXT_DESC_PTR)
+#define bfin_write_DMA2_10_NEXT_DESC_PTR(val) bfin_write32(DMA2_10_NEXT_DESC_PTR,val)
+#define bfin_read_DMA2_10_START_ADDR() bfin_read32(DMA2_10_START_ADDR)
+#define bfin_write_DMA2_10_START_ADDR(val) bfin_write32(DMA2_10_START_ADDR,val)
+#define bfin_read_DMA2_10_X_COUNT() bfin_read16(DMA2_10_X_COUNT)
+#define bfin_write_DMA2_10_X_COUNT(val) bfin_write16(DMA2_10_X_COUNT,val)
+#define bfin_read_DMA2_10_Y_COUNT() bfin_read16(DMA2_10_Y_COUNT)
+#define bfin_write_DMA2_10_Y_COUNT(val) bfin_write16(DMA2_10_Y_COUNT,val)
+#define bfin_read_DMA2_10_X_MODIFY() bfin_read16(DMA2_10_X_MODIFY)
+#define bfin_write_DMA2_10_X_MODIFY(val) bfin_write16(DMA2_10_X_MODIFY,val)
+#define bfin_read_DMA2_10_Y_MODIFY() bfin_read16(DMA2_10_Y_MODIFY)
+#define bfin_write_DMA2_10_Y_MODIFY(val) bfin_write16(DMA2_10_Y_MODIFY,val)
+#define bfin_read_DMA2_10_CURR_DESC_PTR() bfin_read32(DMA2_10_CURR_DESC_PTR)
+#define bfin_write_DMA2_10_CURR_DESC_PTR(val) bfin_write32(DMA2_10_CURR_DESC_PTR,val)
+#define bfin_read_DMA2_10_CURR_ADDR() bfin_read32(DMA2_10_CURR_ADDR)
+#define bfin_write_DMA2_10_CURR_ADDR(val) bfin_write32(DMA2_10_CURR_ADDR,val)
+#define bfin_read_DMA2_10_CURR_X_COUNT() bfin_read16(DMA2_10_CURR_X_COUNT)
+#define bfin_write_DMA2_10_CURR_X_COUNT(val) bfin_write16(DMA2_10_CURR_X_COUNT,val)
+#define bfin_read_DMA2_10_CURR_Y_COUNT() bfin_read16(DMA2_10_CURR_Y_COUNT)
+#define bfin_write_DMA2_10_CURR_Y_COUNT(val) bfin_write16(DMA2_10_CURR_Y_COUNT,val)
+#define bfin_read_DMA2_10_IRQ_STATUS() bfin_read16(DMA2_10_IRQ_STATUS)
+#define bfin_write_DMA2_10_IRQ_STATUS(val) bfin_write16(DMA2_10_IRQ_STATUS,val)
+#define bfin_read_DMA2_10_PERIPHERAL_MAP() bfin_read16(DMA2_10_PERIPHERAL_MAP)
+#define bfin_write_DMA2_10_PERIPHERAL_MAP(val) bfin_write16(DMA2_10_PERIPHERAL_MAP,val)
+#define bfin_read_DMA2_11_CONFIG() bfin_read16(DMA2_11_CONFIG)
+#define bfin_write_DMA2_11_CONFIG(val) bfin_write16(DMA2_11_CONFIG,val)
+#define bfin_read_DMA2_11_NEXT_DESC_PTR() bfin_read32(DMA2_11_NEXT_DESC_PTR)
+#define bfin_write_DMA2_11_NEXT_DESC_PTR(val) bfin_write32(DMA2_11_NEXT_DESC_PTR,val)
+#define bfin_read_DMA2_11_START_ADDR() bfin_read32(DMA2_11_START_ADDR)
+#define bfin_write_DMA2_11_START_ADDR(val) bfin_write32(DMA2_11_START_ADDR,val)
+#define bfin_read_DMA2_11_X_COUNT() bfin_read16(DMA2_11_X_COUNT)
+#define bfin_write_DMA2_11_X_COUNT(val) bfin_write16(DMA2_11_X_COUNT,val)
+#define bfin_read_DMA2_11_Y_COUNT() bfin_read16(DMA2_11_Y_COUNT)
+#define bfin_write_DMA2_11_Y_COUNT(val) bfin_write16(DMA2_11_Y_COUNT,val)
+#define bfin_read_DMA2_11_X_MODIFY() bfin_read16(DMA2_11_X_MODIFY)
+#define bfin_write_DMA2_11_X_MODIFY(val) bfin_write16(DMA2_11_X_MODIFY,val)
+#define bfin_read_DMA2_11_Y_MODIFY() bfin_read16(DMA2_11_Y_MODIFY)
+#define bfin_write_DMA2_11_Y_MODIFY(val) bfin_write16(DMA2_11_Y_MODIFY,val)
+#define bfin_read_DMA2_11_CURR_DESC_PTR() bfin_read32(DMA2_11_CURR_DESC_PTR)
+#define bfin_write_DMA2_11_CURR_DESC_PTR(val) bfin_write32(DMA2_11_CURR_DESC_PTR,val)
+#define bfin_read_DMA2_11_CURR_ADDR() bfin_read32(DMA2_11_CURR_ADDR)
+#define bfin_write_DMA2_11_CURR_ADDR(val) bfin_write32(DMA2_11_CURR_ADDR,val)
+#define bfin_read_DMA2_11_CURR_X_COUNT() bfin_read16(DMA2_11_CURR_X_COUNT)
+#define bfin_write_DMA2_11_CURR_X_COUNT(val) bfin_write16(DMA2_11_CURR_X_COUNT,val)
+#define bfin_read_DMA2_11_CURR_Y_COUNT() bfin_read16(DMA2_11_CURR_Y_COUNT)
+#define bfin_write_DMA2_11_CURR_Y_COUNT(val) bfin_write16(DMA2_11_CURR_Y_COUNT,val)
+#define bfin_read_DMA2_11_IRQ_STATUS() bfin_read16(DMA2_11_IRQ_STATUS)
+#define bfin_write_DMA2_11_IRQ_STATUS(val) bfin_write16(DMA2_11_IRQ_STATUS,val)
+#define bfin_read_DMA2_11_PERIPHERAL_MAP() bfin_read16(DMA2_11_PERIPHERAL_MAP)
+#define bfin_write_DMA2_11_PERIPHERAL_MAP(val) bfin_write16(DMA2_11_PERIPHERAL_MAP,val)
+/* Memory DMA2 Controller registers (0xFFC0 0E80-0xFFC0 0FFF) */
+#define bfin_read_MDMA2_D0_CONFIG() bfin_read16(MDMA2_D0_CONFIG)
+#define bfin_write_MDMA2_D0_CONFIG(val) bfin_write16(MDMA2_D0_CONFIG,val)
+#define bfin_read_MDMA2_D0_NEXT_DESC_PTR() bfin_read32(MDMA2_D0_NEXT_DESC_PTR)
+#define bfin_write_MDMA2_D0_NEXT_DESC_PTR(val) bfin_write32(MDMA2_D0_NEXT_DESC_PTR,val)
+#define bfin_read_MDMA2_D0_START_ADDR() bfin_read32(MDMA2_D0_START_ADDR)
+#define bfin_write_MDMA2_D0_START_ADDR(val) bfin_write32(MDMA2_D0_START_ADDR,val)
+#define bfin_read_MDMA2_D0_X_COUNT() bfin_read16(MDMA2_D0_X_COUNT)
+#define bfin_write_MDMA2_D0_X_COUNT(val) bfin_write16(MDMA2_D0_X_COUNT,val)
+#define bfin_read_MDMA2_D0_Y_COUNT() bfin_read16(MDMA2_D0_Y_COUNT)
+#define bfin_write_MDMA2_D0_Y_COUNT(val) bfin_write16(MDMA2_D0_Y_COUNT,val)
+#define bfin_read_MDMA2_D0_X_MODIFY() bfin_read16(MDMA2_D0_X_MODIFY)
+#define bfin_write_MDMA2_D0_X_MODIFY(val) bfin_write16(MDMA2_D0_X_MODIFY,val)
+#define bfin_read_MDMA2_D0_Y_MODIFY() bfin_read16(MDMA2_D0_Y_MODIFY)
+#define bfin_write_MDMA2_D0_Y_MODIFY(val) bfin_write16(MDMA2_D0_Y_MODIFY,val)
+#define bfin_read_MDMA2_D0_CURR_DESC_PTR() bfin_read32(MDMA2_D0_CURR_DESC_PTR)
+#define bfin_write_MDMA2_D0_CURR_DESC_PTR(val) bfin_write32(MDMA2_D0_CURR_DESC_PTR,val)
+#define bfin_read_MDMA2_D0_CURR_ADDR() bfin_read32(MDMA2_D0_CURR_ADDR)
+#define bfin_write_MDMA2_D0_CURR_ADDR(val) bfin_write32(MDMA2_D0_CURR_ADDR,val)
+#define bfin_read_MDMA2_D0_CURR_X_COUNT() bfin_read16(MDMA2_D0_CURR_X_COUNT)
+#define bfin_write_MDMA2_D0_CURR_X_COUNT(val) bfin_write16(MDMA2_D0_CURR_X_COUNT,val)
+#define bfin_read_MDMA2_D0_CURR_Y_COUNT() bfin_read16(MDMA2_D0_CURR_Y_COUNT)
+#define bfin_write_MDMA2_D0_CURR_Y_COUNT(val) bfin_write16(MDMA2_D0_CURR_Y_COUNT,val)
+#define bfin_read_MDMA2_D0_IRQ_STATUS() bfin_read16(MDMA2_D0_IRQ_STATUS)
+#define bfin_write_MDMA2_D0_IRQ_STATUS(val) bfin_write16(MDMA2_D0_IRQ_STATUS,val)
+#define bfin_read_MDMA2_D0_PERIPHERAL_MAP() bfin_read16(MDMA2_D0_PERIPHERAL_MAP)
+#define bfin_write_MDMA2_D0_PERIPHERAL_MAP(val) bfin_write16(MDMA2_D0_PERIPHERAL_MAP,val)
+#define bfin_read_MDMA2_S0_CONFIG() bfin_read16(MDMA2_S0_CONFIG)
+#define bfin_write_MDMA2_S0_CONFIG(val) bfin_write16(MDMA2_S0_CONFIG,val)
+#define bfin_read_MDMA2_S0_NEXT_DESC_PTR() bfin_read32(MDMA2_S0_NEXT_DESC_PTR)
+#define bfin_write_MDMA2_S0_NEXT_DESC_PTR(val) bfin_write32(MDMA2_S0_NEXT_DESC_PTR,val)
+#define bfin_read_MDMA2_S0_START_ADDR() bfin_read32(MDMA2_S0_START_ADDR)
+#define bfin_write_MDMA2_S0_START_ADDR(val) bfin_write32(MDMA2_S0_START_ADDR,val)
+#define bfin_read_MDMA2_S0_X_COUNT() bfin_read16(MDMA2_S0_X_COUNT)
+#define bfin_write_MDMA2_S0_X_COUNT(val) bfin_write16(MDMA2_S0_X_COUNT,val)
+#define bfin_read_MDMA2_S0_Y_COUNT() bfin_read16(MDMA2_S0_Y_COUNT)
+#define bfin_write_MDMA2_S0_Y_COUNT(val) bfin_write16(MDMA2_S0_Y_COUNT,val)
+#define bfin_read_MDMA2_S0_X_MODIFY() bfin_read16(MDMA2_S0_X_MODIFY)
+#define bfin_write_MDMA2_S0_X_MODIFY(val) bfin_write16(MDMA2_S0_X_MODIFY,val)
+#define bfin_read_MDMA2_S0_Y_MODIFY() bfin_read16(MDMA2_S0_Y_MODIFY)
+#define bfin_write_MDMA2_S0_Y_MODIFY(val) bfin_write16(MDMA2_S0_Y_MODIFY,val)
+#define bfin_read_MDMA2_S0_CURR_DESC_PTR() bfin_read32(MDMA2_S0_CURR_DESC_PTR)
+#define bfin_write_MDMA2_S0_CURR_DESC_PTR(val) bfin_write32(MDMA2_S0_CURR_DESC_PTR,val)
+#define bfin_read_MDMA2_S0_CURR_ADDR() bfin_read32(MDMA2_S0_CURR_ADDR)
+#define bfin_write_MDMA2_S0_CURR_ADDR(val) bfin_write32(MDMA2_S0_CURR_ADDR,val)
+#define bfin_read_MDMA2_S0_CURR_X_COUNT() bfin_read16(MDMA2_S0_CURR_X_COUNT)
+#define bfin_write_MDMA2_S0_CURR_X_COUNT(val) bfin_write16(MDMA2_S0_CURR_X_COUNT,val)
+#define bfin_read_MDMA2_S0_CURR_Y_COUNT() bfin_read16(MDMA2_S0_CURR_Y_COUNT)
+#define bfin_write_MDMA2_S0_CURR_Y_COUNT(val) bfin_write16(MDMA2_S0_CURR_Y_COUNT,val)
+#define bfin_read_MDMA2_S0_IRQ_STATUS() bfin_read16(MDMA2_S0_IRQ_STATUS)
+#define bfin_write_MDMA2_S0_IRQ_STATUS(val) bfin_write16(MDMA2_S0_IRQ_STATUS,val)
+#define bfin_read_MDMA2_S0_PERIPHERAL_MAP() bfin_read16(MDMA2_S0_PERIPHERAL_MAP)
+#define bfin_write_MDMA2_S0_PERIPHERAL_MAP(val) bfin_write16(MDMA2_S0_PERIPHERAL_MAP,val)
+#define bfin_read_MDMA2_D1_CONFIG() bfin_read16(MDMA2_D1_CONFIG)
+#define bfin_write_MDMA2_D1_CONFIG(val) bfin_write16(MDMA2_D1_CONFIG,val)
+#define bfin_read_MDMA2_D1_NEXT_DESC_PTR() bfin_read32(MDMA2_D1_NEXT_DESC_PTR)
+#define bfin_write_MDMA2_D1_NEXT_DESC_PTR(val) bfin_write32(MDMA2_D1_NEXT_DESC_PTR,val)
+#define bfin_read_MDMA2_D1_START_ADDR() bfin_read32(MDMA2_D1_START_ADDR)
+#define bfin_write_MDMA2_D1_START_ADDR(val) bfin_write32(MDMA2_D1_START_ADDR,val)
+#define bfin_read_MDMA2_D1_X_COUNT() bfin_read16(MDMA2_D1_X_COUNT)
+#define bfin_write_MDMA2_D1_X_COUNT(val) bfin_write16(MDMA2_D1_X_COUNT,val)
+#define bfin_read_MDMA2_D1_Y_COUNT() bfin_read16(MDMA2_D1_Y_COUNT)
+#define bfin_write_MDMA2_D1_Y_COUNT(val) bfin_write16(MDMA2_D1_Y_COUNT,val)
+#define bfin_read_MDMA2_D1_X_MODIFY() bfin_read16(MDMA2_D1_X_MODIFY)
+#define bfin_write_MDMA2_D1_X_MODIFY(val) bfin_write16(MDMA2_D1_X_MODIFY,val)
+#define bfin_read_MDMA2_D1_Y_MODIFY() bfin_read16(MDMA2_D1_Y_MODIFY)
+#define bfin_write_MDMA2_D1_Y_MODIFY(val) bfin_write16(MDMA2_D1_Y_MODIFY,val)
+#define bfin_read_MDMA2_D1_CURR_DESC_PTR() bfin_read32(MDMA2_D1_CURR_DESC_PTR)
+#define bfin_write_MDMA2_D1_CURR_DESC_PTR(val) bfin_write32(MDMA2_D1_CURR_DESC_PTR,val)
+#define bfin_read_MDMA2_D1_CURR_ADDR() bfin_read32(MDMA2_D1_CURR_ADDR)
+#define bfin_write_MDMA2_D1_CURR_ADDR(val) bfin_write32(MDMA2_D1_CURR_ADDR,val)
+#define bfin_read_MDMA2_D1_CURR_X_COUNT() bfin_read16(MDMA2_D1_CURR_X_COUNT)
+#define bfin_write_MDMA2_D1_CURR_X_COUNT(val) bfin_write16(MDMA2_D1_CURR_X_COUNT,val)
+#define bfin_read_MDMA2_D1_CURR_Y_COUNT() bfin_read16(MDMA2_D1_CURR_Y_COUNT)
+#define bfin_write_MDMA2_D1_CURR_Y_COUNT(val) bfin_write16(MDMA2_D1_CURR_Y_COUNT,val)
+#define bfin_read_MDMA2_D1_IRQ_STATUS() bfin_read16(MDMA2_D1_IRQ_STATUS)
+#define bfin_write_MDMA2_D1_IRQ_STATUS(val) bfin_write16(MDMA2_D1_IRQ_STATUS,val)
+#define bfin_read_MDMA2_D1_PERIPHERAL_MAP() bfin_read16(MDMA2_D1_PERIPHERAL_MAP)
+#define bfin_write_MDMA2_D1_PERIPHERAL_MAP(val) bfin_write16(MDMA2_D1_PERIPHERAL_MAP,val)
+#define bfin_read_MDMA2_S1_CONFIG() bfin_read16(MDMA2_S1_CONFIG)
+#define bfin_write_MDMA2_S1_CONFIG(val) bfin_write16(MDMA2_S1_CONFIG,val)
+#define bfin_read_MDMA2_S1_NEXT_DESC_PTR() bfin_read32(MDMA2_S1_NEXT_DESC_PTR)
+#define bfin_write_MDMA2_S1_NEXT_DESC_PTR(val) bfin_write32(MDMA2_S1_NEXT_DESC_PTR,val)
+#define bfin_read_MDMA2_S1_START_ADDR() bfin_read32(MDMA2_S1_START_ADDR)
+#define bfin_write_MDMA2_S1_START_ADDR(val) bfin_write32(MDMA2_S1_START_ADDR,val)
+#define bfin_read_MDMA2_S1_X_COUNT() bfin_read16(MDMA2_S1_X_COUNT)
+#define bfin_write_MDMA2_S1_X_COUNT(val) bfin_write16(MDMA2_S1_X_COUNT,val)
+#define bfin_read_MDMA2_S1_Y_COUNT() bfin_read16(MDMA2_S1_Y_COUNT)
+#define bfin_write_MDMA2_S1_Y_COUNT(val) bfin_write16(MDMA2_S1_Y_COUNT,val)
+#define bfin_read_MDMA2_S1_X_MODIFY() bfin_read16(MDMA2_S1_X_MODIFY)
+#define bfin_write_MDMA2_S1_X_MODIFY(val) bfin_write16(MDMA2_S1_X_MODIFY,val)
+#define bfin_read_MDMA2_S1_Y_MODIFY() bfin_read16(MDMA2_S1_Y_MODIFY)
+#define bfin_write_MDMA2_S1_Y_MODIFY(val) bfin_write16(MDMA2_S1_Y_MODIFY,val)
+#define bfin_read_MDMA2_S1_CURR_DESC_PTR() bfin_read32(MDMA2_S1_CURR_DESC_PTR)
+#define bfin_write_MDMA2_S1_CURR_DESC_PTR(val) bfin_write32(MDMA2_S1_CURR_DESC_PTR,val)
+#define bfin_read_MDMA2_S1_CURR_ADDR() bfin_read32(MDMA2_S1_CURR_ADDR)
+#define bfin_write_MDMA2_S1_CURR_ADDR(val) bfin_write32(MDMA2_S1_CURR_ADDR,val)
+#define bfin_read_MDMA2_S1_CURR_X_COUNT() bfin_read16(MDMA2_S1_CURR_X_COUNT)
+#define bfin_write_MDMA2_S1_CURR_X_COUNT(val) bfin_write16(MDMA2_S1_CURR_X_COUNT,val)
+#define bfin_read_MDMA2_S1_CURR_Y_COUNT() bfin_read16(MDMA2_S1_CURR_Y_COUNT)
+#define bfin_write_MDMA2_S1_CURR_Y_COUNT(val) bfin_write16(MDMA2_S1_CURR_Y_COUNT,val)
+#define bfin_read_MDMA2_S1_IRQ_STATUS() bfin_read16(MDMA2_S1_IRQ_STATUS)
+#define bfin_write_MDMA2_S1_IRQ_STATUS(val) bfin_write16(MDMA2_S1_IRQ_STATUS,val)
+#define bfin_read_MDMA2_S1_PERIPHERAL_MAP() bfin_read16(MDMA2_S1_PERIPHERAL_MAP)
+#define bfin_write_MDMA2_S1_PERIPHERAL_MAP(val) bfin_write16(MDMA2_S1_PERIPHERAL_MAP,val)
+/* Internal Memory DMA Registers (0xFFC0_1800 - 0xFFC0_19FF) */
+#define bfin_read_IMDMA_D0_CONFIG() bfin_read16(IMDMA_D0_CONFIG)
+#define bfin_write_IMDMA_D0_CONFIG(val) bfin_write16(IMDMA_D0_CONFIG,val)
+#define bfin_read_IMDMA_D0_NEXT_DESC_PTR() bfin_read32(IMDMA_D0_NEXT_DESC_PTR)
+#define bfin_write_IMDMA_D0_NEXT_DESC_PTR(val) bfin_write32(IMDMA_D0_NEXT_DESC_PTR,val)
+#define bfin_read_IMDMA_D0_START_ADDR() bfin_read32(IMDMA_D0_START_ADDR)
+#define bfin_write_IMDMA_D0_START_ADDR(val) bfin_write32(IMDMA_D0_START_ADDR,val)
+#define bfin_read_IMDMA_D0_X_COUNT() bfin_read16(IMDMA_D0_X_COUNT)
+#define bfin_write_IMDMA_D0_X_COUNT(val) bfin_write16(IMDMA_D0_X_COUNT,val)
+#define bfin_read_IMDMA_D0_Y_COUNT() bfin_read16(IMDMA_D0_Y_COUNT)
+#define bfin_write_IMDMA_D0_Y_COUNT(val) bfin_write16(IMDMA_D0_Y_COUNT,val)
+#define bfin_read_IMDMA_D0_X_MODIFY() bfin_read16(IMDMA_D0_X_MODIFY)
+#define bfin_write_IMDMA_D0_X_MODIFY(val) bfin_write16(IMDMA_D0_X_MODIFY,val)
+#define bfin_read_IMDMA_D0_Y_MODIFY() bfin_read16(IMDMA_D0_Y_MODIFY)
+#define bfin_write_IMDMA_D0_Y_MODIFY(val) bfin_write16(IMDMA_D0_Y_MODIFY,val)
+#define bfin_read_IMDMA_D0_CURR_DESC_PTR() bfin_read32(IMDMA_D0_CURR_DESC_PTR)
+#define bfin_write_IMDMA_D0_CURR_DESC_PTR(val) bfin_write32(IMDMA_D0_CURR_DESC_PTR,val)
+#define bfin_read_IMDMA_D0_CURR_ADDR() bfin_read32(IMDMA_D0_CURR_ADDR)
+#define bfin_write_IMDMA_D0_CURR_ADDR(val) bfin_write32(IMDMA_D0_CURR_ADDR,val)
+#define bfin_read_IMDMA_D0_CURR_X_COUNT() bfin_read16(IMDMA_D0_CURR_X_COUNT)
+#define bfin_write_IMDMA_D0_CURR_X_COUNT(val) bfin_write16(IMDMA_D0_CURR_X_COUNT,val)
+#define bfin_read_IMDMA_D0_CURR_Y_COUNT() bfin_read16(IMDMA_D0_CURR_Y_COUNT)
+#define bfin_write_IMDMA_D0_CURR_Y_COUNT(val) bfin_write16(IMDMA_D0_CURR_Y_COUNT,val)
+#define bfin_read_IMDMA_D0_IRQ_STATUS() bfin_read16(IMDMA_D0_IRQ_STATUS)
+#define bfin_write_IMDMA_D0_IRQ_STATUS(val) bfin_write16(IMDMA_D0_IRQ_STATUS,val)
+#define bfin_read_IMDMA_S0_CONFIG() bfin_read16(IMDMA_S0_CONFIG)
+#define bfin_write_IMDMA_S0_CONFIG(val) bfin_write16(IMDMA_S0_CONFIG,val)
+#define bfin_read_IMDMA_S0_NEXT_DESC_PTR() bfin_read32(IMDMA_S0_NEXT_DESC_PTR)
+#define bfin_write_IMDMA_S0_NEXT_DESC_PTR(val) bfin_write32(IMDMA_S0_NEXT_DESC_PTR,val)
+#define bfin_read_IMDMA_S0_START_ADDR() bfin_read32(IMDMA_S0_START_ADDR)
+#define bfin_write_IMDMA_S0_START_ADDR(val) bfin_write32(IMDMA_S0_START_ADDR,val)
+#define bfin_read_IMDMA_S0_X_COUNT() bfin_read16(IMDMA_S0_X_COUNT)
+#define bfin_write_IMDMA_S0_X_COUNT(val) bfin_write16(IMDMA_S0_X_COUNT,val)
+#define bfin_read_IMDMA_S0_Y_COUNT() bfin_read16(IMDMA_S0_Y_COUNT)
+#define bfin_write_IMDMA_S0_Y_COUNT(val) bfin_write16(IMDMA_S0_Y_COUNT,val)
+#define bfin_read_IMDMA_S0_X_MODIFY() bfin_read16(IMDMA_S0_X_MODIFY)
+#define bfin_write_IMDMA_S0_X_MODIFY(val) bfin_write16(IMDMA_S0_X_MODIFY,val)
+#define bfin_read_IMDMA_S0_Y_MODIFY() bfin_read16(IMDMA_S0_Y_MODIFY)
+#define bfin_write_IMDMA_S0_Y_MODIFY(val) bfin_write16(IMDMA_S0_Y_MODIFY,val)
+#define bfin_read_IMDMA_S0_CURR_DESC_PTR() bfin_read32(IMDMA_S0_CURR_DESC_PTR)
+#define bfin_write_IMDMA_S0_CURR_DESC_PTR(val) bfin_write32(IMDMA_S0_CURR_DESC_PTR,val)
+#define bfin_read_IMDMA_S0_CURR_ADDR() bfin_read32(IMDMA_S0_CURR_ADDR)
+#define bfin_write_IMDMA_S0_CURR_ADDR(val) bfin_write32(IMDMA_S0_CURR_ADDR,val)
+#define bfin_read_IMDMA_S0_CURR_X_COUNT() bfin_read16(IMDMA_S0_CURR_X_COUNT)
+#define bfin_write_IMDMA_S0_CURR_X_COUNT(val) bfin_write16(IMDMA_S0_CURR_X_COUNT,val)
+#define bfin_read_IMDMA_S0_CURR_Y_COUNT() bfin_read16(IMDMA_S0_CURR_Y_COUNT)
+#define bfin_write_IMDMA_S0_CURR_Y_COUNT(val) bfin_write16(IMDMA_S0_CURR_Y_COUNT,val)
+#define bfin_read_IMDMA_S0_IRQ_STATUS() bfin_read16(IMDMA_S0_IRQ_STATUS)
+#define bfin_write_IMDMA_S0_IRQ_STATUS(val) bfin_write16(IMDMA_S0_IRQ_STATUS,val)
+#define bfin_read_IMDMA_D1_CONFIG() bfin_read16(IMDMA_D1_CONFIG)
+#define bfin_write_IMDMA_D1_CONFIG(val) bfin_write16(IMDMA_D1_CONFIG,val)
+#define bfin_read_IMDMA_D1_NEXT_DESC_PTR() bfin_read32(IMDMA_D1_NEXT_DESC_PTR)
+#define bfin_write_IMDMA_D1_NEXT_DESC_PTR(val) bfin_write32(IMDMA_D1_NEXT_DESC_PTR,val)
+#define bfin_read_IMDMA_D1_START_ADDR() bfin_read32(IMDMA_D1_START_ADDR)
+#define bfin_write_IMDMA_D1_START_ADDR(val) bfin_write32(IMDMA_D1_START_ADDR,val)
+#define bfin_read_IMDMA_D1_X_COUNT() bfin_read16(IMDMA_D1_X_COUNT)
+#define bfin_write_IMDMA_D1_X_COUNT(val) bfin_write16(IMDMA_D1_X_COUNT,val)
+#define bfin_read_IMDMA_D1_Y_COUNT() bfin_read16(IMDMA_D1_Y_COUNT)
+#define bfin_write_IMDMA_D1_Y_COUNT(val) bfin_write16(IMDMA_D1_Y_COUNT,val)
+#define bfin_read_IMDMA_D1_X_MODIFY() bfin_read16(IMDMA_D1_X_MODIFY)
+#define bfin_write_IMDMA_D1_X_MODIFY(val) bfin_write16(IMDMA_D1_X_MODIFY,val)
+#define bfin_read_IMDMA_D1_Y_MODIFY() bfin_read16(IMDMA_D1_Y_MODIFY)
+#define bfin_write_IMDMA_D1_Y_MODIFY(val) bfin_write16(IMDMA_D1_Y_MODIFY,val)
+#define bfin_read_IMDMA_D1_CURR_DESC_PTR() bfin_read32(IMDMA_D1_CURR_DESC_PTR)
+#define bfin_write_IMDMA_D1_CURR_DESC_PTR(val) bfin_write32(IMDMA_D1_CURR_DESC_PTR,val)
+#define bfin_read_IMDMA_D1_CURR_ADDR() bfin_read32(IMDMA_D1_CURR_ADDR)
+#define bfin_write_IMDMA_D1_CURR_ADDR(val) bfin_write32(IMDMA_D1_CURR_ADDR,val)
+#define bfin_read_IMDMA_D1_CURR_X_COUNT() bfin_read16(IMDMA_D1_CURR_X_COUNT)
+#define bfin_write_IMDMA_D1_CURR_X_COUNT(val) bfin_write16(IMDMA_D1_CURR_X_COUNT,val)
+#define bfin_read_IMDMA_D1_CURR_Y_COUNT() bfin_read16(IMDMA_D1_CURR_Y_COUNT)
+#define bfin_write_IMDMA_D1_CURR_Y_COUNT(val) bfin_write16(IMDMA_D1_CURR_Y_COUNT,val)
+#define bfin_read_IMDMA_D1_IRQ_STATUS() bfin_read16(IMDMA_D1_IRQ_STATUS)
+#define bfin_write_IMDMA_D1_IRQ_STATUS(val) bfin_write16(IMDMA_D1_IRQ_STATUS,val)
+#define bfin_read_IMDMA_S1_CONFIG() bfin_read16(IMDMA_S1_CONFIG)
+#define bfin_write_IMDMA_S1_CONFIG(val) bfin_write16(IMDMA_S1_CONFIG,val)
+#define bfin_read_IMDMA_S1_NEXT_DESC_PTR() bfin_read32(IMDMA_S1_NEXT_DESC_PTR)
+#define bfin_write_IMDMA_S1_NEXT_DESC_PTR(val) bfin_write32(IMDMA_S1_NEXT_DESC_PTR,val)
+#define bfin_read_IMDMA_S1_START_ADDR() bfin_read32(IMDMA_S1_START_ADDR)
+#define bfin_write_IMDMA_S1_START_ADDR(val) bfin_write32(IMDMA_S1_START_ADDR,val)
+#define bfin_read_IMDMA_S1_X_COUNT() bfin_read16(IMDMA_S1_X_COUNT)
+#define bfin_write_IMDMA_S1_X_COUNT(val) bfin_write16(IMDMA_S1_X_COUNT,val)
+#define bfin_read_IMDMA_S1_Y_COUNT() bfin_read16(IMDMA_S1_Y_COUNT)
+#define bfin_write_IMDMA_S1_Y_COUNT(val) bfin_write16(IMDMA_S1_Y_COUNT,val)
+#define bfin_read_IMDMA_S1_X_MODIFY() bfin_read16(IMDMA_S1_X_MODIFY)
+#define bfin_write_IMDMA_S1_X_MODIFY(val) bfin_write16(IMDMA_S1_X_MODIFY,val)
+#define bfin_read_IMDMA_S1_Y_MODIFY() bfin_read16(IMDMA_S1_Y_MODIFY)
+#define bfin_write_IMDMA_S1_Y_MODIFY(val) bfin_write16(IMDMA_S1_Y_MODIFY,val)
+#define bfin_read_IMDMA_S1_CURR_DESC_PTR() bfin_read32(IMDMA_S1_CURR_DESC_PTR)
+#define bfin_write_IMDMA_S1_CURR_DESC_PTR(val) bfin_write32(IMDMA_S1_CURR_DESC_PTR,val)
+#define bfin_read_IMDMA_S1_CURR_ADDR() bfin_read32(IMDMA_S1_CURR_ADDR)
+#define bfin_write_IMDMA_S1_CURR_ADDR(val) bfin_write32(IMDMA_S1_CURR_ADDR,val)
+#define bfin_read_IMDMA_S1_CURR_X_COUNT() bfin_read16(IMDMA_S1_CURR_X_COUNT)
+#define bfin_write_IMDMA_S1_CURR_X_COUNT(val) bfin_write16(IMDMA_S1_CURR_X_COUNT,val)
+#define bfin_read_IMDMA_S1_CURR_Y_COUNT() bfin_read16(IMDMA_S1_CURR_Y_COUNT)
+#define bfin_write_IMDMA_S1_CURR_Y_COUNT(val) bfin_write16(IMDMA_S1_CURR_Y_COUNT,val)
+#define bfin_read_IMDMA_S1_IRQ_STATUS() bfin_read16(IMDMA_S1_IRQ_STATUS)
+#define bfin_write_IMDMA_S1_IRQ_STATUS(val) bfin_write16(IMDMA_S1_IRQ_STATUS,val)
+
+#define bfin_read_MDMA_S0_CONFIG() bfin_read_MDMA1_S0_CONFIG()
+#define bfin_write_MDMA_S0_CONFIG(val) bfin_write_MDMA1_S0_CONFIG(val)
+#define bfin_read_MDMA_S0_IRQ_STATUS() bfin_read_MDMA1_S0_IRQ_STATUS()
+#define bfin_write_MDMA_S0_IRQ_STATUS(val) bfin_write_MDMA1_S0_IRQ_STATUS(val)
+#define bfin_read_MDMA_S0_X_MODIFY() bfin_read_MDMA1_S0_X_MODIFY()
+#define bfin_write_MDMA_S0_X_MODIFY(val) bfin_write_MDMA1_S0_X_MODIFY(val)
+#define bfin_read_MDMA_S0_Y_MODIFY() bfin_read_MDMA1_S0_Y_MODIFY()
+#define bfin_write_MDMA_S0_Y_MODIFY(val) bfin_write_MDMA1_S0_Y_MODIFY(val)
+#define bfin_read_MDMA_S0_X_COUNT() bfin_read_MDMA1_S0_X_COUNT()
+#define bfin_write_MDMA_S0_X_COUNT(val) bfin_write_MDMA1_S0_X_COUNT(val)
+#define bfin_read_MDMA_S0_Y_COUNT() bfin_read_MDMA1_S0_Y_COUNT()
+#define bfin_write_MDMA_S0_Y_COUNT(val) bfin_write_MDMA1_S0_Y_COUNT(val)
+#define bfin_read_MDMA_S0_START_ADDR() bfin_read_MDMA1_S0_START_ADDR()
+#define bfin_write_MDMA_S0_START_ADDR(val) bfin_write_MDMA1_S0_START_ADDR(val)
+#define bfin_read_MDMA_D0_CONFIG() bfin_read_MDMA1_D0_CONFIG()
+#define bfin_write_MDMA_D0_CONFIG(val) bfin_write_MDMA1_D0_CONFIG(val)
+#define bfin_read_MDMA_D0_IRQ_STATUS() bfin_read_MDMA1_D0_IRQ_STATUS()
+#define bfin_write_MDMA_D0_IRQ_STATUS(val) bfin_write_MDMA1_D0_IRQ_STATUS(val)
+#define bfin_read_MDMA_D0_X_MODIFY() bfin_read_MDMA1_D0_X_MODIFY()
+#define bfin_write_MDMA_D0_X_MODIFY(val) bfin_write_MDMA1_D0_X_MODIFY(val)
+#define bfin_read_MDMA_D0_Y_MODIFY() bfin_read_MDMA1_D0_Y_MODIFY()
+#define bfin_write_MDMA_D0_Y_MODIFY(val) bfin_write_MDMA1_D0_Y_MODIFY(val)
+#define bfin_read_MDMA_D0_X_COUNT() bfin_read_MDMA1_D0_X_COUNT()
+#define bfin_write_MDMA_D0_X_COUNT(val) bfin_write_MDMA1_D0_X_COUNT(val)
+#define bfin_read_MDMA_D0_Y_COUNT() bfin_read_MDMA1_D0_Y_COUNT()
+#define bfin_write_MDMA_D0_Y_COUNT(val) bfin_write_MDMA1_D0_Y_COUNT(val)
+#define bfin_read_MDMA_D0_START_ADDR() bfin_read_MDMA1_D0_START_ADDR()
+#define bfin_write_MDMA_D0_START_ADDR(val) bfin_write_MDMA1_D0_START_ADDR(val)
+
+#endif /* _CDEF_BF561_H */
diff --git a/include/asm-blackfin/mach-bf561/defBF561.h b/include/asm-blackfin/mach-bf561/defBF561.h
new file mode 100644
index 0000000..a6de4c6
--- /dev/null
+++ b/include/asm-blackfin/mach-bf561/defBF561.h
@@ -0,0 +1,1717 @@
+
+/*
+ * File: include/asm-blackfin/mach-bf561/defBF561.h
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ * SYSTEM MMR REGISTER AND MEMORY MAP FOR ADSP-BF561
+ * Rev:
+ *
+ * Modified:
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.
+ * If not, write to the Free Software Foundation,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef _DEF_BF561_H
+#define _DEF_BF561_H
+/*
+#if !defined(__ADSPBF561__)
+#warning defBF561.h should only be included for BF561 chip.
+#endif
+*/
+/* include all Core registers and bit definitions */
+#include <asm/mach-common/def_LPBlackfin.h>
+
+/*********************************************************************************** */
+/* System MMR Register Map */
+/*********************************************************************************** */
+
+/* Clock and System Control (0xFFC00000 - 0xFFC000FF) */
+
+#define PLL_CTL 0xFFC00000 /* PLL Control register (16-bit) */
+#define PLL_DIV 0xFFC00004 /* PLL Divide Register (16-bit) */
+#define VR_CTL 0xFFC00008 /* Voltage Regulator Control Register (16-bit) */
+#define PLL_STAT 0xFFC0000C /* PLL Status register (16-bit) */
+#define PLL_LOCKCNT 0xFFC00010 /* PLL Lock Count register (16-bit) */
+#define CHIPID 0xFFC00014 /* Chip ID Register */
+
+/* System Reset and Interrupt Controller registers for core A (0xFFC0 0100-0xFFC0 01FF) */
+#define SICA_SWRST 0xFFC00100 /* Software Reset register */
+#define SICA_SYSCR 0xFFC00104 /* System Reset Configuration register */
+#define SICA_RVECT 0xFFC00108 /* SIC Reset Vector Address Register */
+#define SICA_IMASK 0xFFC0010C /* SIC Interrupt Mask register 0 - hack to fix old tests */
+#define SICA_IMASK0 0xFFC0010C /* SIC Interrupt Mask register 0 */
+#define SICA_IMASK1 0xFFC00110 /* SIC Interrupt Mask register 1 */
+#define SICA_IAR0 0xFFC00124 /* SIC Interrupt Assignment Register 0 */
+#define SICA_IAR1 0xFFC00128 /* SIC Interrupt Assignment Register 1 */
+#define SICA_IAR2 0xFFC0012C /* SIC Interrupt Assignment Register 2 */
+#define SICA_IAR3 0xFFC00130 /* SIC Interrupt Assignment Register 3 */
+#define SICA_IAR4 0xFFC00134 /* SIC Interrupt Assignment Register 4 */
+#define SICA_IAR5 0xFFC00138 /* SIC Interrupt Assignment Register 5 */
+#define SICA_IAR6 0xFFC0013C /* SIC Interrupt Assignment Register 6 */
+#define SICA_IAR7 0xFFC00140 /* SIC Interrupt Assignment Register 7 */
+#define SICA_ISR0 0xFFC00114 /* SIC Interrupt Status register 0 */
+#define SICA_ISR1 0xFFC00118 /* SIC Interrupt Status register 1 */
+#define SICA_IWR0 0xFFC0011C /* SIC Interrupt Wakeup-Enable register 0 */
+#define SICA_IWR1 0xFFC00120 /* SIC Interrupt Wakeup-Enable register 1 */
+
+/* System Reset and Interrupt Controller registers for Core B (0xFFC0 1100-0xFFC0 11FF) */
+#define SICB_SWRST 0xFFC01100 /* reserved */
+#define SICB_SYSCR 0xFFC01104 /* reserved */
+#define SICB_RVECT 0xFFC01108 /* SIC Reset Vector Address Register */
+#define SICB_IMASK0 0xFFC0110C /* SIC Interrupt Mask register 0 */
+#define SICB_IMASK1 0xFFC01110 /* SIC Interrupt Mask register 1 */
+#define SICB_IAR0 0xFFC01124 /* SIC Interrupt Assignment Register 0 */
+#define SICB_IAR1 0xFFC01128 /* SIC Interrupt Assignment Register 1 */
+#define SICB_IAR2 0xFFC0112C /* SIC Interrupt Assignment Register 2 */
+#define SICB_IAR3 0xFFC01130 /* SIC Interrupt Assignment Register 3 */
+#define SICB_IAR4 0xFFC01134 /* SIC Interrupt Assignment Register 4 */
+#define SICB_IAR5 0xFFC01138 /* SIC Interrupt Assignment Register 5 */
+#define SICB_IAR6 0xFFC0113C /* SIC Interrupt Assignment Register 6 */
+#define SICB_IAR7 0xFFC01140 /* SIC Interrupt Assignment Register 7 */
+#define SICB_ISR0 0xFFC01114 /* SIC Interrupt Status register 0 */
+#define SICB_ISR1 0xFFC01118 /* SIC Interrupt Status register 1 */
+#define SICB_IWR0 0xFFC0111C /* SIC Interrupt Wakeup-Enable register 0 */
+#define SICB_IWR1 0xFFC01120 /* SIC Interrupt Wakeup-Enable register 1 */
+
+/* Watchdog Timer registers for Core A (0xFFC0 0200-0xFFC0 02FF) */
+#define WDOGA_CTL 0xFFC00200 /* Watchdog Control register */
+#define WDOGA_CNT 0xFFC00204 /* Watchdog Count register */
+#define WDOGA_STAT 0xFFC00208 /* Watchdog Status register */
+
+/* Watchdog Timer registers for Core B (0xFFC0 1200-0xFFC0 12FF) */
+#define WDOGB_CTL 0xFFC01200 /* Watchdog Control register */
+#define WDOGB_CNT 0xFFC01204 /* Watchdog Count register */
+#define WDOGB_STAT 0xFFC01208 /* Watchdog Status register */
+
+/* UART Controller (0xFFC00400 - 0xFFC004FF) */
+#define UART_THR 0xFFC00400 /* Transmit Holding register */
+#define UART_RBR 0xFFC00400 /* Receive Buffer register */
+#define UART_DLL 0xFFC00400 /* Divisor Latch (Low-Byte) */
+#define UART_IER 0xFFC00404 /* Interrupt Enable Register */
+#define UART_DLH 0xFFC00404 /* Divisor Latch (High-Byte) */
+#define UART_IIR 0xFFC00408 /* Interrupt Identification Register */
+#define UART_LCR 0xFFC0040C /* Line Control Register */
+#define UART_MCR 0xFFC00410 /* Modem Control Register */
+#define UART_LSR 0xFFC00414 /* Line Status Register */
+#define UART_MSR 0xFFC00418 /* Modem Status Register */
+#define UART_SCR 0xFFC0041C /* SCR Scratch Register */
+#define UART_GCTL 0xFFC00424 /* Global Control Register */
+
+/* SPI Controller (0xFFC00500 - 0xFFC005FF) */
+#define SPI_CTL 0xFFC00500 /* SPI Control Register */
+#define SPI_FLG 0xFFC00504 /* SPI Flag register */
+#define SPI_STAT 0xFFC00508 /* SPI Status register */
+#define SPI_TDBR 0xFFC0050C /* SPI Transmit Data Buffer Register */
+#define SPI_RDBR 0xFFC00510 /* SPI Receive Data Buffer Register */
+#define SPI_BAUD 0xFFC00514 /* SPI Baud rate Register */
+#define SPI_SHADOW 0xFFC00518 /* SPI_RDBR Shadow Register */
+
+/* Timer 0-7 registers (0xFFC0 0600-0xFFC0 06FF) */
+#define TIMER0_CONFIG 0xFFC00600 /* Timer0 Configuration register */
+#define TIMER0_COUNTER 0xFFC00604 /* Timer0 Counter register */
+#define TIMER0_PERIOD 0xFFC00608 /* Timer0 Period register */
+#define TIMER0_WIDTH 0xFFC0060C /* Timer0 Width register */
+
+#define TIMER1_CONFIG 0xFFC00610 /* Timer1 Configuration register */
+#define TIMER1_COUNTER 0xFFC00614 /* Timer1 Counter register */
+#define TIMER1_PERIOD 0xFFC00618 /* Timer1 Period register */
+#define TIMER1_WIDTH 0xFFC0061C /* Timer1 Width register */
+
+#define TIMER2_CONFIG 0xFFC00620 /* Timer2 Configuration register */
+#define TIMER2_COUNTER 0xFFC00624 /* Timer2 Counter register */
+#define TIMER2_PERIOD 0xFFC00628 /* Timer2 Period register */
+#define TIMER2_WIDTH 0xFFC0062C /* Timer2 Width register */
+
+#define TIMER3_CONFIG 0xFFC00630 /* Timer3 Configuration register */
+#define TIMER3_COUNTER 0xFFC00634 /* Timer3 Counter register */
+#define TIMER3_PERIOD 0xFFC00638 /* Timer3 Period register */
+#define TIMER3_WIDTH 0xFFC0063C /* Timer3 Width register */
+
+#define TIMER4_CONFIG 0xFFC00640 /* Timer4 Configuration register */
+#define TIMER4_COUNTER 0xFFC00644 /* Timer4 Counter register */
+#define TIMER4_PERIOD 0xFFC00648 /* Timer4 Period register */
+#define TIMER4_WIDTH 0xFFC0064C /* Timer4 Width register */
+
+#define TIMER5_CONFIG 0xFFC00650 /* Timer5 Configuration register */
+#define TIMER5_COUNTER 0xFFC00654 /* Timer5 Counter register */
+#define TIMER5_PERIOD 0xFFC00658 /* Timer5 Period register */
+#define TIMER5_WIDTH 0xFFC0065C /* Timer5 Width register */
+
+#define TIMER6_CONFIG 0xFFC00660 /* Timer6 Configuration register */
+#define TIMER6_COUNTER 0xFFC00664 /* Timer6 Counter register */
+#define TIMER6_PERIOD 0xFFC00668 /* Timer6 Period register */
+#define TIMER6_WIDTH 0xFFC0066C /* Timer6 Width register */
+
+#define TIMER7_CONFIG 0xFFC00670 /* Timer7 Configuration register */
+#define TIMER7_COUNTER 0xFFC00674 /* Timer7 Counter register */
+#define TIMER7_PERIOD 0xFFC00678 /* Timer7 Period register */
+#define TIMER7_WIDTH 0xFFC0067C /* Timer7 Width register */
+
+#define TMRS8_ENABLE 0xFFC00680 /* Timer Enable Register */
+#define TMRS8_DISABLE 0xFFC00684 /* Timer Disable register */
+#define TMRS8_STATUS 0xFFC00688 /* Timer Status register */
+
+/* Timer registers 8-11 (0xFFC0 1600-0xFFC0 16FF) */
+#define TIMER8_CONFIG 0xFFC01600 /* Timer8 Configuration register */
+#define TIMER8_COUNTER 0xFFC01604 /* Timer8 Counter register */
+#define TIMER8_PERIOD 0xFFC01608 /* Timer8 Period register */
+#define TIMER8_WIDTH 0xFFC0160C /* Timer8 Width register */
+
+#define TIMER9_CONFIG 0xFFC01610 /* Timer9 Configuration register */
+#define TIMER9_COUNTER 0xFFC01614 /* Timer9 Counter register */
+#define TIMER9_PERIOD 0xFFC01618 /* Timer9 Period register */
+#define TIMER9_WIDTH 0xFFC0161C /* Timer9 Width register */
+
+#define TIMER10_CONFIG 0xFFC01620 /* Timer10 Configuration register */
+#define TIMER10_COUNTER 0xFFC01624 /* Timer10 Counter register */
+#define TIMER10_PERIOD 0xFFC01628 /* Timer10 Period register */
+#define TIMER10_WIDTH 0xFFC0162C /* Timer10 Width register */
+
+#define TIMER11_CONFIG 0xFFC01630 /* Timer11 Configuration register */
+#define TIMER11_COUNTER 0xFFC01634 /* Timer11 Counter register */
+#define TIMER11_PERIOD 0xFFC01638 /* Timer11 Period register */
+#define TIMER11_WIDTH 0xFFC0163C /* Timer11 Width register */
+
+#define TMRS4_ENABLE 0xFFC01640 /* Timer Enable Register */
+#define TMRS4_DISABLE 0xFFC01644 /* Timer Disable register */
+#define TMRS4_STATUS 0xFFC01648 /* Timer Status register */
+
+/* Programmable Flag 0 registers (0xFFC0 0700-0xFFC0 07FF) */
+#define FIO0_FLAG_D 0xFFC00700 /* Flag Data register */
+#define FIO0_FLAG_C 0xFFC00704 /* Flag Clear register */
+#define FIO0_FLAG_S 0xFFC00708 /* Flag Set register */
+#define FIO0_FLAG_T 0xFFC0070C /* Flag Toggle register */
+#define FIO0_MASKA_D 0xFFC00710 /* Flag Mask Interrupt A Data register */
+#define FIO0_MASKA_C 0xFFC00714 /* Flag Mask Interrupt A Clear register */
+#define FIO0_MASKA_S 0xFFC00718 /* Flag Mask Interrupt A Set register */
+#define FIO0_MASKA_T 0xFFC0071C /* Flag Mask Interrupt A Toggle register */
+#define FIO0_MASKB_D 0xFFC00720 /* Flag Mask Interrupt B Data register */
+#define FIO0_MASKB_C 0xFFC00724 /* Flag Mask Interrupt B Clear register */
+#define FIO0_MASKB_S 0xFFC00728 /* Flag Mask Interrupt B Set register */
+#define FIO0_MASKB_T 0xFFC0072C /* Flag Mask Interrupt B Toggle register */
+#define FIO0_DIR 0xFFC00730 /* Flag Direction register */
+#define FIO0_POLAR 0xFFC00734 /* Flag Polarity register */
+#define FIO0_EDGE 0xFFC00738 /* Flag Interrupt Sensitivity register */
+#define FIO0_BOTH 0xFFC0073C /* Flag Set on Both Edges register */
+#define FIO0_INEN 0xFFC00740 /* Flag Input Enable register */
+
+/* Programmable Flag 1 registers (0xFFC0 1500-0xFFC0 15FF) */
+#define FIO1_FLAG_D 0xFFC01500 /* Flag Data register (mask used to directly */
+#define FIO1_FLAG_C 0xFFC01504 /* Flag Clear register */
+#define FIO1_FLAG_S 0xFFC01508 /* Flag Set register */
+#define FIO1_FLAG_T 0xFFC0150C /* Flag Toggle register (mask used to */
+#define FIO1_MASKA_D 0xFFC01510 /* Flag Mask Interrupt A Data register */
+#define FIO1_MASKA_C 0xFFC01514 /* Flag Mask Interrupt A Clear register */
+#define FIO1_MASKA_S 0xFFC01518 /* Flag Mask Interrupt A Set register */
+#define FIO1_MASKA_T 0xFFC0151C /* Flag Mask Interrupt A Toggle register */
+#define FIO1_MASKB_D 0xFFC01520 /* Flag Mask Interrupt B Data register */
+#define FIO1_MASKB_C 0xFFC01524 /* Flag Mask Interrupt B Clear register */
+#define FIO1_MASKB_S 0xFFC01528 /* Flag Mask Interrupt B Set register */
+#define FIO1_MASKB_T 0xFFC0152C /* Flag Mask Interrupt B Toggle register */
+#define FIO1_DIR 0xFFC01530 /* Flag Direction register */
+#define FIO1_POLAR 0xFFC01534 /* Flag Polarity register */
+#define FIO1_EDGE 0xFFC01538 /* Flag Interrupt Sensitivity register */
+#define FIO1_BOTH 0xFFC0153C /* Flag Set on Both Edges register */
+#define FIO1_INEN 0xFFC01540 /* Flag Input Enable register */
+
+/* Programmable Flag registers (0xFFC0 1700-0xFFC0 17FF) */
+#define FIO2_FLAG_D 0xFFC01700 /* Flag Data register (mask used to directly */
+#define FIO2_FLAG_C 0xFFC01704 /* Flag Clear register */
+#define FIO2_FLAG_S 0xFFC01708 /* Flag Set register */
+#define FIO2_FLAG_T 0xFFC0170C /* Flag Toggle register (mask used to */
+#define FIO2_MASKA_D 0xFFC01710 /* Flag Mask Interrupt A Data register */
+#define FIO2_MASKA_C 0xFFC01714 /* Flag Mask Interrupt A Clear register */
+#define FIO2_MASKA_S 0xFFC01718 /* Flag Mask Interrupt A Set register */
+#define FIO2_MASKA_T 0xFFC0171C /* Flag Mask Interrupt A Toggle register */
+#define FIO2_MASKB_D 0xFFC01720 /* Flag Mask Interrupt B Data register */
+#define FIO2_MASKB_C 0xFFC01724 /* Flag Mask Interrupt B Clear register */
+#define FIO2_MASKB_S 0xFFC01728 /* Flag Mask Interrupt B Set register */
+#define FIO2_MASKB_T 0xFFC0172C /* Flag Mask Interrupt B Toggle register */
+#define FIO2_DIR 0xFFC01730 /* Flag Direction register */
+#define FIO2_POLAR 0xFFC01734 /* Flag Polarity register */
+#define FIO2_EDGE 0xFFC01738 /* Flag Interrupt Sensitivity register */
+#define FIO2_BOTH 0xFFC0173C /* Flag Set on Both Edges register */
+#define FIO2_INEN 0xFFC01740 /* Flag Input Enable register */
+
+/* SPORT0 Controller (0xFFC00800 - 0xFFC008FF) */
+#define SPORT0_TCR1 0xFFC00800 /* SPORT0 Transmit Configuration 1 Register */
+#define SPORT0_TCR2 0xFFC00804 /* SPORT0 Transmit Configuration 2 Register */
+#define SPORT0_TCLKDIV 0xFFC00808 /* SPORT0 Transmit Clock Divider */
+#define SPORT0_TFSDIV 0xFFC0080C /* SPORT0 Transmit Frame Sync Divider */
+#define SPORT0_TX 0xFFC00810 /* SPORT0 TX Data Register */
+#define SPORT0_RX 0xFFC00818 /* SPORT0 RX Data Register */
+#define SPORT0_RCR1 0xFFC00820 /* SPORT0 Transmit Configuration 1 Register */
+#define SPORT0_RCR2 0xFFC00824 /* SPORT0 Transmit Configuration 2 Register */
+#define SPORT0_RCLKDIV 0xFFC00828 /* SPORT0 Receive Clock Divider */
+#define SPORT0_RFSDIV 0xFFC0082C /* SPORT0 Receive Frame Sync Divider */
+#define SPORT0_STAT 0xFFC00830 /* SPORT0 Status Register */
+#define SPORT0_CHNL 0xFFC00834 /* SPORT0 Current Channel Register */
+#define SPORT0_MCMC1 0xFFC00838 /* SPORT0 Multi-Channel Configuration Register 1 */
+#define SPORT0_MCMC2 0xFFC0083C /* SPORT0 Multi-Channel Configuration Register 2 */
+#define SPORT0_MTCS0 0xFFC00840 /* SPORT0 Multi-Channel Transmit Select Register 0 */
+#define SPORT0_MTCS1 0xFFC00844 /* SPORT0 Multi-Channel Transmit Select Register 1 */
+#define SPORT0_MTCS2 0xFFC00848 /* SPORT0 Multi-Channel Transmit Select Register 2 */
+#define SPORT0_MTCS3 0xFFC0084C /* SPORT0 Multi-Channel Transmit Select Register 3 */
+#define SPORT0_MRCS0 0xFFC00850 /* SPORT0 Multi-Channel Receive Select Register 0 */
+#define SPORT0_MRCS1 0xFFC00854 /* SPORT0 Multi-Channel Receive Select Register 1 */
+#define SPORT0_MRCS2 0xFFC00858 /* SPORT0 Multi-Channel Receive Select Register 2 */
+#define SPORT0_MRCS3 0xFFC0085C /* SPORT0 Multi-Channel Receive Select Register 3 */
+
+/* SPORT1 Controller (0xFFC00900 - 0xFFC009FF) */
+#define SPORT1_TCR1 0xFFC00900 /* SPORT1 Transmit Configuration 1 Register */
+#define SPORT1_TCR2 0xFFC00904 /* SPORT1 Transmit Configuration 2 Register */
+#define SPORT1_TCLKDIV 0xFFC00908 /* SPORT1 Transmit Clock Divider */
+#define SPORT1_TFSDIV 0xFFC0090C /* SPORT1 Transmit Frame Sync Divider */
+#define SPORT1_TX 0xFFC00910 /* SPORT1 TX Data Register */
+#define SPORT1_RX 0xFFC00918 /* SPORT1 RX Data Register */
+#define SPORT1_RCR1 0xFFC00920 /* SPORT1 Transmit Configuration 1 Register */
+#define SPORT1_RCR2 0xFFC00924 /* SPORT1 Transmit Configuration 2 Register */
+#define SPORT1_RCLKDIV 0xFFC00928 /* SPORT1 Receive Clock Divider */
+#define SPORT1_RFSDIV 0xFFC0092C /* SPORT1 Receive Frame Sync Divider */
+#define SPORT1_STAT 0xFFC00930 /* SPORT1 Status Register */
+#define SPORT1_CHNL 0xFFC00934 /* SPORT1 Current Channel Register */
+#define SPORT1_MCMC1 0xFFC00938 /* SPORT1 Multi-Channel Configuration Register 1 */
+#define SPORT1_MCMC2 0xFFC0093C /* SPORT1 Multi-Channel Configuration Register 2 */
+#define SPORT1_MTCS0 0xFFC00940 /* SPORT1 Multi-Channel Transmit Select Register 0 */
+#define SPORT1_MTCS1 0xFFC00944 /* SPORT1 Multi-Channel Transmit Select Register 1 */
+#define SPORT1_MTCS2 0xFFC00948 /* SPORT1 Multi-Channel Transmit Select Register 2 */
+#define SPORT1_MTCS3 0xFFC0094C /* SPORT1 Multi-Channel Transmit Select Register 3 */
+#define SPORT1_MRCS0 0xFFC00950 /* SPORT1 Multi-Channel Receive Select Register 0 */
+#define SPORT1_MRCS1 0xFFC00954 /* SPORT1 Multi-Channel Receive Select Register 1 */
+#define SPORT1_MRCS2 0xFFC00958 /* SPORT1 Multi-Channel Receive Select Register 2 */
+#define SPORT1_MRCS3 0xFFC0095C /* SPORT1 Multi-Channel Receive Select Register 3 */
+
+/* Asynchronous Memory Controller - External Bus Interface Unit */
+#define EBIU_AMGCTL 0xFFC00A00 /* Asynchronous Memory Global Control Register */
+#define EBIU_AMBCTL0 0xFFC00A04 /* Asynchronous Memory Bank Control Register 0 */
+#define EBIU_AMBCTL1 0xFFC00A08 /* Asynchronous Memory Bank Control Register 1 */
+
+/* SDRAM Controller External Bus Interface Unit (0xFFC00A00 - 0xFFC00AFF) */
+#define EBIU_SDGCTL 0xFFC00A10 /* SDRAM Global Control Register */
+#define EBIU_SDBCTL 0xFFC00A14 /* SDRAM Bank Control Register */
+#define EBIU_SDRRC 0xFFC00A18 /* SDRAM Refresh Rate Control Register */
+#define EBIU_SDSTAT 0xFFC00A1C /* SDRAM Status Register */
+
+/* Parallel Peripheral Interface (PPI) 0 registers (0xFFC0 1000-0xFFC0 10FF) */
+#define PPI0_CONTROL 0xFFC01000 /* PPI0 Control register */
+#define PPI0_STATUS 0xFFC01004 /* PPI0 Status register */
+#define PPI0_COUNT 0xFFC01008 /* PPI0 Transfer Count register */
+#define PPI0_DELAY 0xFFC0100C /* PPI0 Delay Count register */
+#define PPI0_FRAME 0xFFC01010 /* PPI0 Frame Length register */
+
+/*Parallel Peripheral Interface (PPI) 1 registers (0xFFC0 1300-0xFFC0 13FF) */
+#define PPI1_CONTROL 0xFFC01300 /* PPI1 Control register */
+#define PPI1_STATUS 0xFFC01304 /* PPI1 Status register */
+#define PPI1_COUNT 0xFFC01308 /* PPI1 Transfer Count register */
+#define PPI1_DELAY 0xFFC0130C /* PPI1 Delay Count register */
+#define PPI1_FRAME 0xFFC01310 /* PPI1 Frame Length register */
+
+/*DMA traffic control registers */
+#define DMA1_TC_PER 0xFFC01B0C /* Traffic control periods */
+#define DMA1_TC_CNT 0xFFC01B10 /* Traffic control current counts */
+#define DMA2_TC_PER 0xFFC00B0C /* Traffic control periods */
+#define DMA2_TC_CNT 0xFFC00B10 /* Traffic control current counts */
+
+/* DMA1 Controller registers (0xFFC0 1C00-0xFFC0 1FFF) */
+#define DMA1_0_CONFIG 0xFFC01C08 /* DMA1 Channel 0 Configuration register */
+#define DMA1_0_NEXT_DESC_PTR 0xFFC01C00 /* DMA1 Channel 0 Next Descripter Ptr Reg */
+#define DMA1_0_START_ADDR 0xFFC01C04 /* DMA1 Channel 0 Start Address */
+#define DMA1_0_X_COUNT 0xFFC01C10 /* DMA1 Channel 0 Inner Loop Count */
+#define DMA1_0_Y_COUNT 0xFFC01C18 /* DMA1 Channel 0 Outer Loop Count */
+#define DMA1_0_X_MODIFY 0xFFC01C14 /* DMA1 Channel 0 Inner Loop Addr Increment */
+#define DMA1_0_Y_MODIFY 0xFFC01C1C /* DMA1 Channel 0 Outer Loop Addr Increment */
+#define DMA1_0_CURR_DESC_PTR 0xFFC01C20 /* DMA1 Channel 0 Current Descriptor Pointer */
+#define DMA1_0_CURR_ADDR 0xFFC01C24 /* DMA1 Channel 0 Current Address Pointer */
+#define DMA1_0_CURR_X_COUNT 0xFFC01C30 /* DMA1 Channel 0 Current Inner Loop Count */
+#define DMA1_0_CURR_Y_COUNT 0xFFC01C38 /* DMA1 Channel 0 Current Outer Loop Count */
+#define DMA1_0_IRQ_STATUS 0xFFC01C28 /* DMA1 Channel 0 Interrupt/Status Register */
+#define DMA1_0_PERIPHERAL_MAP 0xFFC01C2C /* DMA1 Channel 0 Peripheral Map Register */
+
+#define DMA1_1_CONFIG 0xFFC01C48 /* DMA1 Channel 1 Configuration register */
+#define DMA1_1_NEXT_DESC_PTR 0xFFC01C40 /* DMA1 Channel 1 Next Descripter Ptr Reg */
+#define DMA1_1_START_ADDR 0xFFC01C44 /* DMA1 Channel 1 Start Address */
+#define DMA1_1_X_COUNT 0xFFC01C50 /* DMA1 Channel 1 Inner Loop Count */
+#define DMA1_1_Y_COUNT 0xFFC01C58 /* DMA1 Channel 1 Outer Loop Count */
+#define DMA1_1_X_MODIFY 0xFFC01C54 /* DMA1 Channel 1 Inner Loop Addr Increment */
+#define DMA1_1_Y_MODIFY 0xFFC01C5C /* DMA1 Channel 1 Outer Loop Addr Increment */
+#define DMA1_1_CURR_DESC_PTR 0xFFC01C60 /* DMA1 Channel 1 Current Descriptor Pointer */
+#define DMA1_1_CURR_ADDR 0xFFC01C64 /* DMA1 Channel 1 Current Address Pointer */
+#define DMA1_1_CURR_X_COUNT 0xFFC01C70 /* DMA1 Channel 1 Current Inner Loop Count */
+#define DMA1_1_CURR_Y_COUNT 0xFFC01C78 /* DMA1 Channel 1 Current Outer Loop Count */
+#define DMA1_1_IRQ_STATUS 0xFFC01C68 /* DMA1 Channel 1 Interrupt/Status Register */
+#define DMA1_1_PERIPHERAL_MAP 0xFFC01C6C /* DMA1 Channel 1 Peripheral Map Register */
+
+#define DMA1_2_CONFIG 0xFFC01C88 /* DMA1 Channel 2 Configuration register */
+#define DMA1_2_NEXT_DESC_PTR 0xFFC01C80 /* DMA1 Channel 2 Next Descripter Ptr Reg */
+#define DMA1_2_START_ADDR 0xFFC01C84 /* DMA1 Channel 2 Start Address */
+#define DMA1_2_X_COUNT 0xFFC01C90 /* DMA1 Channel 2 Inner Loop Count */
+#define DMA1_2_Y_COUNT 0xFFC01C98 /* DMA1 Channel 2 Outer Loop Count */
+#define DMA1_2_X_MODIFY 0xFFC01C94 /* DMA1 Channel 2 Inner Loop Addr Increment */
+#define DMA1_2_Y_MODIFY 0xFFC01C9C /* DMA1 Channel 2 Outer Loop Addr Increment */
+#define DMA1_2_CURR_DESC_PTR 0xFFC01CA0 /* DMA1 Channel 2 Current Descriptor Pointer */
+#define DMA1_2_CURR_ADDR 0xFFC01CA4 /* DMA1 Channel 2 Current Address Pointer */
+#define DMA1_2_CURR_X_COUNT 0xFFC01CB0 /* DMA1 Channel 2 Current Inner Loop Count */
+#define DMA1_2_CURR_Y_COUNT 0xFFC01CB8 /* DMA1 Channel 2 Current Outer Loop Count */
+#define DMA1_2_IRQ_STATUS 0xFFC01CA8 /* DMA1 Channel 2 Interrupt/Status Register */
+#define DMA1_2_PERIPHERAL_MAP 0xFFC01CAC /* DMA1 Channel 2 Peripheral Map Register */
+
+#define DMA1_3_CONFIG 0xFFC01CC8 /* DMA1 Channel 3 Configuration register */
+#define DMA1_3_NEXT_DESC_PTR 0xFFC01CC0 /* DMA1 Channel 3 Next Descripter Ptr Reg */
+#define DMA1_3_START_ADDR 0xFFC01CC4 /* DMA1 Channel 3 Start Address */
+#define DMA1_3_X_COUNT 0xFFC01CD0 /* DMA1 Channel 3 Inner Loop Count */
+#define DMA1_3_Y_COUNT 0xFFC01CD8 /* DMA1 Channel 3 Outer Loop Count */
+#define DMA1_3_X_MODIFY 0xFFC01CD4 /* DMA1 Channel 3 Inner Loop Addr Increment */
+#define DMA1_3_Y_MODIFY 0xFFC01CDC /* DMA1 Channel 3 Outer Loop Addr Increment */
+#define DMA1_3_CURR_DESC_PTR 0xFFC01CE0 /* DMA1 Channel 3 Current Descriptor Pointer */
+#define DMA1_3_CURR_ADDR 0xFFC01CE4 /* DMA1 Channel 3 Current Address Pointer */
+#define DMA1_3_CURR_X_COUNT 0xFFC01CF0 /* DMA1 Channel 3 Current Inner Loop Count */
+#define DMA1_3_CURR_Y_COUNT 0xFFC01CF8 /* DMA1 Channel 3 Current Outer Loop Count */
+#define DMA1_3_IRQ_STATUS 0xFFC01CE8 /* DMA1 Channel 3 Interrupt/Status Register */
+#define DMA1_3_PERIPHERAL_MAP 0xFFC01CEC /* DMA1 Channel 3 Peripheral Map Register */
+
+#define DMA1_4_CONFIG 0xFFC01D08 /* DMA1 Channel 4 Configuration register */
+#define DMA1_4_NEXT_DESC_PTR 0xFFC01D00 /* DMA1 Channel 4 Next Descripter Ptr Reg */
+#define DMA1_4_START_ADDR 0xFFC01D04 /* DMA1 Channel 4 Start Address */
+#define DMA1_4_X_COUNT 0xFFC01D10 /* DMA1 Channel 4 Inner Loop Count */
+#define DMA1_4_Y_COUNT 0xFFC01D18 /* DMA1 Channel 4 Outer Loop Count */
+#define DMA1_4_X_MODIFY 0xFFC01D14 /* DMA1 Channel 4 Inner Loop Addr Increment */
+#define DMA1_4_Y_MODIFY 0xFFC01D1C /* DMA1 Channel 4 Outer Loop Addr Increment */
+#define DMA1_4_CURR_DESC_PTR 0xFFC01D20 /* DMA1 Channel 4 Current Descriptor Pointer */
+#define DMA1_4_CURR_ADDR 0xFFC01D24 /* DMA1 Channel 4 Current Address Pointer */
+#define DMA1_4_CURR_X_COUNT 0xFFC01D30 /* DMA1 Channel 4 Current Inner Loop Count */
+#define DMA1_4_CURR_Y_COUNT 0xFFC01D38 /* DMA1 Channel 4 Current Outer Loop Count */
+#define DMA1_4_IRQ_STATUS 0xFFC01D28 /* DMA1 Channel 4 Interrupt/Status Register */
+#define DMA1_4_PERIPHERAL_MAP 0xFFC01D2C /* DMA1 Channel 4 Peripheral Map Register */
+
+#define DMA1_5_CONFIG 0xFFC01D48 /* DMA1 Channel 5 Configuration register */
+#define DMA1_5_NEXT_DESC_PTR 0xFFC01D40 /* DMA1 Channel 5 Next Descripter Ptr Reg */
+#define DMA1_5_START_ADDR 0xFFC01D44 /* DMA1 Channel 5 Start Address */
+#define DMA1_5_X_COUNT 0xFFC01D50 /* DMA1 Channel 5 Inner Loop Count */
+#define DMA1_5_Y_COUNT 0xFFC01D58 /* DMA1 Channel 5 Outer Loop Count */
+#define DMA1_5_X_MODIFY 0xFFC01D54 /* DMA1 Channel 5 Inner Loop Addr Increment */
+#define DMA1_5_Y_MODIFY 0xFFC01D5C /* DMA1 Channel 5 Outer Loop Addr Increment */
+#define DMA1_5_CURR_DESC_PTR 0xFFC01D60 /* DMA1 Channel 5 Current Descriptor Pointer */
+#define DMA1_5_CURR_ADDR 0xFFC01D64 /* DMA1 Channel 5 Current Address Pointer */
+#define DMA1_5_CURR_X_COUNT 0xFFC01D70 /* DMA1 Channel 5 Current Inner Loop Count */
+#define DMA1_5_CURR_Y_COUNT 0xFFC01D78 /* DMA1 Channel 5 Current Outer Loop Count */
+#define DMA1_5_IRQ_STATUS 0xFFC01D68 /* DMA1 Channel 5 Interrupt/Status Register */
+#define DMA1_5_PERIPHERAL_MAP 0xFFC01D6C /* DMA1 Channel 5 Peripheral Map Register */
+
+#define DMA1_6_CONFIG 0xFFC01D88 /* DMA1 Channel 6 Configuration register */
+#define DMA1_6_NEXT_DESC_PTR 0xFFC01D80 /* DMA1 Channel 6 Next Descripter Ptr Reg */
+#define DMA1_6_START_ADDR 0xFFC01D84 /* DMA1 Channel 6 Start Address */
+#define DMA1_6_X_COUNT 0xFFC01D90 /* DMA1 Channel 6 Inner Loop Count */
+#define DMA1_6_Y_COUNT 0xFFC01D98 /* DMA1 Channel 6 Outer Loop Count */
+#define DMA1_6_X_MODIFY 0xFFC01D94 /* DMA1 Channel 6 Inner Loop Addr Increment */
+#define DMA1_6_Y_MODIFY 0xFFC01D9C /* DMA1 Channel 6 Outer Loop Addr Increment */
+#define DMA1_6_CURR_DESC_PTR 0xFFC01DA0 /* DMA1 Channel 6 Current Descriptor Pointer */
+#define DMA1_6_CURR_ADDR 0xFFC01DA4 /* DMA1 Channel 6 Current Address Pointer */
+#define DMA1_6_CURR_X_COUNT 0xFFC01DB0 /* DMA1 Channel 6 Current Inner Loop Count */
+#define DMA1_6_CURR_Y_COUNT 0xFFC01DB8 /* DMA1 Channel 6 Current Outer Loop Count */
+#define DMA1_6_IRQ_STATUS 0xFFC01DA8 /* DMA1 Channel 6 Interrupt/Status Register */
+#define DMA1_6_PERIPHERAL_MAP 0xFFC01DAC /* DMA1 Channel 6 Peripheral Map Register */
+
+#define DMA1_7_CONFIG 0xFFC01DC8 /* DMA1 Channel 7 Configuration register */
+#define DMA1_7_NEXT_DESC_PTR 0xFFC01DC0 /* DMA1 Channel 7 Next Descripter Ptr Reg */
+#define DMA1_7_START_ADDR 0xFFC01DC4 /* DMA1 Channel 7 Start Address */
+#define DMA1_7_X_COUNT 0xFFC01DD0 /* DMA1 Channel 7 Inner Loop Count */
+#define DMA1_7_Y_COUNT 0xFFC01DD8 /* DMA1 Channel 7 Outer Loop Count */
+#define DMA1_7_X_MODIFY 0xFFC01DD4 /* DMA1 Channel 7 Inner Loop Addr Increment */
+#define DMA1_7_Y_MODIFY 0xFFC01DDC /* DMA1 Channel 7 Outer Loop Addr Increment */
+#define DMA1_7_CURR_DESC_PTR 0xFFC01DE0 /* DMA1 Channel 7 Current Descriptor Pointer */
+#define DMA1_7_CURR_ADDR 0xFFC01DE4 /* DMA1 Channel 7 Current Address Pointer */
+#define DMA1_7_CURR_X_COUNT 0xFFC01DF0 /* DMA1 Channel 7 Current Inner Loop Count */
+#define DMA1_7_CURR_Y_COUNT 0xFFC01DF8 /* DMA1 Channel 7 Current Outer Loop Count */
+#define DMA1_7_IRQ_STATUS 0xFFC01DE8 /* DMA1 Channel 7 Interrupt/Status Register */
+#define DMA1_7_PERIPHERAL_MAP 0xFFC01DEC /* DMA1 Channel 7 Peripheral Map Register */
+
+#define DMA1_8_CONFIG 0xFFC01E08 /* DMA1 Channel 8 Configuration register */
+#define DMA1_8_NEXT_DESC_PTR 0xFFC01E00 /* DMA1 Channel 8 Next Descripter Ptr Reg */
+#define DMA1_8_START_ADDR 0xFFC01E04 /* DMA1 Channel 8 Start Address */
+#define DMA1_8_X_COUNT 0xFFC01E10 /* DMA1 Channel 8 Inner Loop Count */
+#define DMA1_8_Y_COUNT 0xFFC01E18 /* DMA1 Channel 8 Outer Loop Count */
+#define DMA1_8_X_MODIFY 0xFFC01E14 /* DMA1 Channel 8 Inner Loop Addr Increment */
+#define DMA1_8_Y_MODIFY 0xFFC01E1C /* DMA1 Channel 8 Outer Loop Addr Increment */
+#define DMA1_8_CURR_DESC_PTR 0xFFC01E20 /* DMA1 Channel 8 Current Descriptor Pointer */
+#define DMA1_8_CURR_ADDR 0xFFC01E24 /* DMA1 Channel 8 Current Address Pointer */
+#define DMA1_8_CURR_X_COUNT 0xFFC01E30 /* DMA1 Channel 8 Current Inner Loop Count */
+#define DMA1_8_CURR_Y_COUNT 0xFFC01E38 /* DMA1 Channel 8 Current Outer Loop Count */
+#define DMA1_8_IRQ_STATUS 0xFFC01E28 /* DMA1 Channel 8 Interrupt/Status Register */
+#define DMA1_8_PERIPHERAL_MAP 0xFFC01E2C /* DMA1 Channel 8 Peripheral Map Register */
+
+#define DMA1_9_CONFIG 0xFFC01E48 /* DMA1 Channel 9 Configuration register */
+#define DMA1_9_NEXT_DESC_PTR 0xFFC01E40 /* DMA1 Channel 9 Next Descripter Ptr Reg */
+#define DMA1_9_START_ADDR 0xFFC01E44 /* DMA1 Channel 9 Start Address */
+#define DMA1_9_X_COUNT 0xFFC01E50 /* DMA1 Channel 9 Inner Loop Count */
+#define DMA1_9_Y_COUNT 0xFFC01E58 /* DMA1 Channel 9 Outer Loop Count */
+#define DMA1_9_X_MODIFY 0xFFC01E54 /* DMA1 Channel 9 Inner Loop Addr Increment */
+#define DMA1_9_Y_MODIFY 0xFFC01E5C /* DMA1 Channel 9 Outer Loop Addr Increment */
+#define DMA1_9_CURR_DESC_PTR 0xFFC01E60 /* DMA1 Channel 9 Current Descriptor Pointer */
+#define DMA1_9_CURR_ADDR 0xFFC01E64 /* DMA1 Channel 9 Current Address Pointer */
+#define DMA1_9_CURR_X_COUNT 0xFFC01E70 /* DMA1 Channel 9 Current Inner Loop Count */
+#define DMA1_9_CURR_Y_COUNT 0xFFC01E78 /* DMA1 Channel 9 Current Outer Loop Count */
+#define DMA1_9_IRQ_STATUS 0xFFC01E68 /* DMA1 Channel 9 Interrupt/Status Register */
+#define DMA1_9_PERIPHERAL_MAP 0xFFC01E6C /* DMA1 Channel 9 Peripheral Map Register */
+
+#define DMA1_10_CONFIG 0xFFC01E88 /* DMA1 Channel 10 Configuration register */
+#define DMA1_10_NEXT_DESC_PTR 0xFFC01E80 /* DMA1 Channel 10 Next Descripter Ptr Reg */
+#define DMA1_10_START_ADDR 0xFFC01E84 /* DMA1 Channel 10 Start Address */
+#define DMA1_10_X_COUNT 0xFFC01E90 /* DMA1 Channel 10 Inner Loop Count */
+#define DMA1_10_Y_COUNT 0xFFC01E98 /* DMA1 Channel 10 Outer Loop Count */
+#define DMA1_10_X_MODIFY 0xFFC01E94 /* DMA1 Channel 10 Inner Loop Addr Increment */
+#define DMA1_10_Y_MODIFY 0xFFC01E9C /* DMA1 Channel 10 Outer Loop Addr Increment */
+#define DMA1_10_CURR_DESC_PTR 0xFFC01EA0 /* DMA1 Channel 10 Current Descriptor Pointer */
+#define DMA1_10_CURR_ADDR 0xFFC01EA4 /* DMA1 Channel 10 Current Address Pointer */
+#define DMA1_10_CURR_X_COUNT 0xFFC01EB0 /* DMA1 Channel 10 Current Inner Loop Count */
+#define DMA1_10_CURR_Y_COUNT 0xFFC01EB8 /* DMA1 Channel 10 Current Outer Loop Count */
+#define DMA1_10_IRQ_STATUS 0xFFC01EA8 /* DMA1 Channel 10 Interrupt/Status Register */
+#define DMA1_10_PERIPHERAL_MAP 0xFFC01EAC /* DMA1 Channel 10 Peripheral Map Register */
+
+#define DMA1_11_CONFIG 0xFFC01EC8 /* DMA1 Channel 11 Configuration register */
+#define DMA1_11_NEXT_DESC_PTR 0xFFC01EC0 /* DMA1 Channel 11 Next Descripter Ptr Reg */
+#define DMA1_11_START_ADDR 0xFFC01EC4 /* DMA1 Channel 11 Start Address */
+#define DMA1_11_X_COUNT 0xFFC01ED0 /* DMA1 Channel 11 Inner Loop Count */
+#define DMA1_11_Y_COUNT 0xFFC01ED8 /* DMA1 Channel 11 Outer Loop Count */
+#define DMA1_11_X_MODIFY 0xFFC01ED4 /* DMA1 Channel 11 Inner Loop Addr Increment */
+#define DMA1_11_Y_MODIFY 0xFFC01EDC /* DMA1 Channel 11 Outer Loop Addr Increment */
+#define DMA1_11_CURR_DESC_PTR 0xFFC01EE0 /* DMA1 Channel 11 Current Descriptor Pointer */
+#define DMA1_11_CURR_ADDR 0xFFC01EE4 /* DMA1 Channel 11 Current Address Pointer */
+#define DMA1_11_CURR_X_COUNT 0xFFC01EF0 /* DMA1 Channel 11 Current Inner Loop Count */
+#define DMA1_11_CURR_Y_COUNT 0xFFC01EF8 /* DMA1 Channel 11 Current Outer Loop Count */
+#define DMA1_11_IRQ_STATUS 0xFFC01EE8 /* DMA1 Channel 11 Interrupt/Status Register */
+#define DMA1_11_PERIPHERAL_MAP 0xFFC01EEC /* DMA1 Channel 11 Peripheral Map Register */
+
+/* Memory DMA1 Controller registers (0xFFC0 1E80-0xFFC0 1FFF) */
+#define MDMA1_D0_CONFIG 0xFFC01F08 /*MemDMA1 Stream 0 Destination Configuration */
+#define MDMA1_D0_NEXT_DESC_PTR 0xFFC01F00 /*MemDMA1 Stream 0 Destination Next Descriptor Ptr Reg */
+#define MDMA1_D0_START_ADDR 0xFFC01F04 /*MemDMA1 Stream 0 Destination Start Address */
+#define MDMA1_D0_X_COUNT 0xFFC01F10 /*MemDMA1 Stream 0 Destination Inner-Loop Count */
+#define MDMA1_D0_Y_COUNT 0xFFC01F18 /*MemDMA1 Stream 0 Destination Outer-Loop Count */
+#define MDMA1_D0_X_MODIFY 0xFFC01F14 /*MemDMA1 Stream 0 Dest Inner-Loop Address-Increment */
+#define MDMA1_D0_Y_MODIFY 0xFFC01F1C /*MemDMA1 Stream 0 Dest Outer-Loop Address-Increment */
+#define MDMA1_D0_CURR_DESC_PTR 0xFFC01F20 /*MemDMA1 Stream 0 Dest Current Descriptor Ptr reg */
+#define MDMA1_D0_CURR_ADDR 0xFFC01F24 /*MemDMA1 Stream 0 Destination Current Address */
+#define MDMA1_D0_CURR_X_COUNT 0xFFC01F30 /*MemDMA1 Stream 0 Dest Current Inner-Loop Count */
+#define MDMA1_D0_CURR_Y_COUNT 0xFFC01F38 /*MemDMA1 Stream 0 Dest Current Outer-Loop Count */
+#define MDMA1_D0_IRQ_STATUS 0xFFC01F28 /*MemDMA1 Stream 0 Destination Interrupt/Status */
+#define MDMA1_D0_PERIPHERAL_MAP 0xFFC01F2C /*MemDMA1 Stream 0 Destination Peripheral Map */
+
+#define MDMA1_S0_CONFIG 0xFFC01F48 /*MemDMA1 Stream 0 Source Configuration */
+#define MDMA1_S0_NEXT_DESC_PTR 0xFFC01F40 /*MemDMA1 Stream 0 Source Next Descriptor Ptr Reg */
+#define MDMA1_S0_START_ADDR 0xFFC01F44 /*MemDMA1 Stream 0 Source Start Address */
+#define MDMA1_S0_X_COUNT 0xFFC01F50 /*MemDMA1 Stream 0 Source Inner-Loop Count */
+#define MDMA1_S0_Y_COUNT 0xFFC01F58 /*MemDMA1 Stream 0 Source Outer-Loop Count */
+#define MDMA1_S0_X_MODIFY 0xFFC01F54 /*MemDMA1 Stream 0 Source Inner-Loop Address-Increment */
+#define MDMA1_S0_Y_MODIFY 0xFFC01F5C /*MemDMA1 Stream 0 Source Outer-Loop Address-Increment */
+#define MDMA1_S0_CURR_DESC_PTR 0xFFC01F60 /*MemDMA1 Stream 0 Source Current Descriptor Ptr reg */
+#define MDMA1_S0_CURR_ADDR 0xFFC01F64 /*MemDMA1 Stream 0 Source Current Address */
+#define MDMA1_S0_CURR_X_COUNT 0xFFC01F70 /*MemDMA1 Stream 0 Source Current Inner-Loop Count */
+#define MDMA1_S0_CURR_Y_COUNT 0xFFC01F78 /*MemDMA1 Stream 0 Source Current Outer-Loop Count */
+#define MDMA1_S0_IRQ_STATUS 0xFFC01F68 /*MemDMA1 Stream 0 Source Interrupt/Status */
+#define MDMA1_S0_PERIPHERAL_MAP 0xFFC01F6C /*MemDMA1 Stream 0 Source Peripheral Map */
+
+#define MDMA1_D1_CONFIG 0xFFC01F88 /*MemDMA1 Stream 1 Destination Configuration */
+#define MDMA1_D1_NEXT_DESC_PTR 0xFFC01F80 /*MemDMA1 Stream 1 Destination Next Descriptor Ptr Reg */
+#define MDMA1_D1_START_ADDR 0xFFC01F84 /*MemDMA1 Stream 1 Destination Start Address */
+#define MDMA1_D1_X_COUNT 0xFFC01F90 /*MemDMA1 Stream 1 Destination Inner-Loop Count */
+#define MDMA1_D1_Y_COUNT 0xFFC01F98 /*MemDMA1 Stream 1 Destination Outer-Loop Count */
+#define MDMA1_D1_X_MODIFY 0xFFC01F94 /*MemDMA1 Stream 1 Dest Inner-Loop Address-Increment */
+#define MDMA1_D1_Y_MODIFY 0xFFC01F9C /*MemDMA1 Stream 1 Dest Outer-Loop Address-Increment */
+#define MDMA1_D1_CURR_DESC_PTR 0xFFC01FA0 /*MemDMA1 Stream 1 Dest Current Descriptor Ptr reg */
+#define MDMA1_D1_CURR_ADDR 0xFFC01FA4 /*MemDMA1 Stream 1 Dest Current Address */
+#define MDMA1_D1_CURR_X_COUNT 0xFFC01FB0 /*MemDMA1 Stream 1 Dest Current Inner-Loop Count */
+#define MDMA1_D1_CURR_Y_COUNT 0xFFC01FB8 /*MemDMA1 Stream 1 Dest Current Outer-Loop Count */
+#define MDMA1_D1_IRQ_STATUS 0xFFC01FA8 /*MemDMA1 Stream 1 Dest Interrupt/Status */
+#define MDMA1_D1_PERIPHERAL_MAP 0xFFC01FAC /*MemDMA1 Stream 1 Dest Peripheral Map */
+
+#define MDMA1_S1_CONFIG 0xFFC01FC8 /*MemDMA1 Stream 1 Source Configuration */
+#define MDMA1_S1_NEXT_DESC_PTR 0xFFC01FC0 /*MemDMA1 Stream 1 Source Next Descriptor Ptr Reg */
+#define MDMA1_S1_START_ADDR 0xFFC01FC4 /*MemDMA1 Stream 1 Source Start Address */
+#define MDMA1_S1_X_COUNT 0xFFC01FD0 /*MemDMA1 Stream 1 Source Inner-Loop Count */
+#define MDMA1_S1_Y_COUNT 0xFFC01FD8 /*MemDMA1 Stream 1 Source Outer-Loop Count */
+#define MDMA1_S1_X_MODIFY 0xFFC01FD4 /*MemDMA1 Stream 1 Source Inner-Loop Address-Increment */
+#define MDMA1_S1_Y_MODIFY 0xFFC01FDC /*MemDMA1 Stream 1 Source Outer-Loop Address-Increment */
+#define MDMA1_S1_CURR_DESC_PTR 0xFFC01FE0 /*MemDMA1 Stream 1 Source Current Descriptor Ptr reg */
+#define MDMA1_S1_CURR_ADDR 0xFFC01FE4 /*MemDMA1 Stream 1 Source Current Address */
+#define MDMA1_S1_CURR_X_COUNT 0xFFC01FF0 /*MemDMA1 Stream 1 Source Current Inner-Loop Count */
+#define MDMA1_S1_CURR_Y_COUNT 0xFFC01FF8 /*MemDMA1 Stream 1 Source Current Outer-Loop Count */
+#define MDMA1_S1_IRQ_STATUS 0xFFC01FE8 /*MemDMA1 Stream 1 Source Interrupt/Status */
+#define MDMA1_S1_PERIPHERAL_MAP 0xFFC01FEC /*MemDMA1 Stream 1 Source Peripheral Map */
+
+/* DMA2 Controller registers (0xFFC0 0C00-0xFFC0 0DFF) */
+#define DMA2_0_CONFIG 0xFFC00C08 /* DMA2 Channel 0 Configuration register */
+#define DMA2_0_NEXT_DESC_PTR 0xFFC00C00 /* DMA2 Channel 0 Next Descripter Ptr Reg */
+#define DMA2_0_START_ADDR 0xFFC00C04 /* DMA2 Channel 0 Start Address */
+#define DMA2_0_X_COUNT 0xFFC00C10 /* DMA2 Channel 0 Inner Loop Count */
+#define DMA2_0_Y_COUNT 0xFFC00C18 /* DMA2 Channel 0 Outer Loop Count */
+#define DMA2_0_X_MODIFY 0xFFC00C14 /* DMA2 Channel 0 Inner Loop Addr Increment */
+#define DMA2_0_Y_MODIFY 0xFFC00C1C /* DMA2 Channel 0 Outer Loop Addr Increment */
+#define DMA2_0_CURR_DESC_PTR 0xFFC00C20 /* DMA2 Channel 0 Current Descriptor Pointer */
+#define DMA2_0_CURR_ADDR 0xFFC00C24 /* DMA2 Channel 0 Current Address Pointer */
+#define DMA2_0_CURR_X_COUNT 0xFFC00C30 /* DMA2 Channel 0 Current Inner Loop Count */
+#define DMA2_0_CURR_Y_COUNT 0xFFC00C38 /* DMA2 Channel 0 Current Outer Loop Count */
+#define DMA2_0_IRQ_STATUS 0xFFC00C28 /* DMA2 Channel 0 Interrupt/Status Register */
+#define DMA2_0_PERIPHERAL_MAP 0xFFC00C2C /* DMA2 Channel 0 Peripheral Map Register */
+
+#define DMA2_1_CONFIG 0xFFC00C48 /* DMA2 Channel 1 Configuration register */
+#define DMA2_1_NEXT_DESC_PTR 0xFFC00C40 /* DMA2 Channel 1 Next Descripter Ptr Reg */
+#define DMA2_1_START_ADDR 0xFFC00C44 /* DMA2 Channel 1 Start Address */
+#define DMA2_1_X_COUNT 0xFFC00C50 /* DMA2 Channel 1 Inner Loop Count */
+#define DMA2_1_Y_COUNT 0xFFC00C58 /* DMA2 Channel 1 Outer Loop Count */
+#define DMA2_1_X_MODIFY 0xFFC00C54 /* DMA2 Channel 1 Inner Loop Addr Increment */
+#define DMA2_1_Y_MODIFY 0xFFC00C5C /* DMA2 Channel 1 Outer Loop Addr Increment */
+#define DMA2_1_CURR_DESC_PTR 0xFFC00C60 /* DMA2 Channel 1 Current Descriptor Pointer */
+#define DMA2_1_CURR_ADDR 0xFFC00C64 /* DMA2 Channel 1 Current Address Pointer */
+#define DMA2_1_CURR_X_COUNT 0xFFC00C70 /* DMA2 Channel 1 Current Inner Loop Count */
+#define DMA2_1_CURR_Y_COUNT 0xFFC00C78 /* DMA2 Channel 1 Current Outer Loop Count */
+#define DMA2_1_IRQ_STATUS 0xFFC00C68 /* DMA2 Channel 1 Interrupt/Status Register */
+#define DMA2_1_PERIPHERAL_MAP 0xFFC00C6C /* DMA2 Channel 1 Peripheral Map Register */
+
+#define DMA2_2_CONFIG 0xFFC00C88 /* DMA2 Channel 2 Configuration register */
+#define DMA2_2_NEXT_DESC_PTR 0xFFC00C80 /* DMA2 Channel 2 Next Descripter Ptr Reg */
+#define DMA2_2_START_ADDR 0xFFC00C84 /* DMA2 Channel 2 Start Address */
+#define DMA2_2_X_COUNT 0xFFC00C90 /* DMA2 Channel 2 Inner Loop Count */
+#define DMA2_2_Y_COUNT 0xFFC00C98 /* DMA2 Channel 2 Outer Loop Count */
+#define DMA2_2_X_MODIFY 0xFFC00C94 /* DMA2 Channel 2 Inner Loop Addr Increment */
+#define DMA2_2_Y_MODIFY 0xFFC00C9C /* DMA2 Channel 2 Outer Loop Addr Increment */
+#define DMA2_2_CURR_DESC_PTR 0xFFC00CA0 /* DMA2 Channel 2 Current Descriptor Pointer */
+#define DMA2_2_CURR_ADDR 0xFFC00CA4 /* DMA2 Channel 2 Current Address Pointer */
+#define DMA2_2_CURR_X_COUNT 0xFFC00CB0 /* DMA2 Channel 2 Current Inner Loop Count */
+#define DMA2_2_CURR_Y_COUNT 0xFFC00CB8 /* DMA2 Channel 2 Current Outer Loop Count */
+#define DMA2_2_IRQ_STATUS 0xFFC00CA8 /* DMA2 Channel 2 Interrupt/Status Register */
+#define DMA2_2_PERIPHERAL_MAP 0xFFC00CAC /* DMA2 Channel 2 Peripheral Map Register */
+
+#define DMA2_3_CONFIG 0xFFC00CC8 /* DMA2 Channel 3 Configuration register */
+#define DMA2_3_NEXT_DESC_PTR 0xFFC00CC0 /* DMA2 Channel 3 Next Descripter Ptr Reg */
+#define DMA2_3_START_ADDR 0xFFC00CC4 /* DMA2 Channel 3 Start Address */
+#define DMA2_3_X_COUNT 0xFFC00CD0 /* DMA2 Channel 3 Inner Loop Count */
+#define DMA2_3_Y_COUNT 0xFFC00CD8 /* DMA2 Channel 3 Outer Loop Count */
+#define DMA2_3_X_MODIFY 0xFFC00CD4 /* DMA2 Channel 3 Inner Loop Addr Increment */
+#define DMA2_3_Y_MODIFY 0xFFC00CDC /* DMA2 Channel 3 Outer Loop Addr Increment */
+#define DMA2_3_CURR_DESC_PTR 0xFFC00CE0 /* DMA2 Channel 3 Current Descriptor Pointer */
+#define DMA2_3_CURR_ADDR 0xFFC00CE4 /* DMA2 Channel 3 Current Address Pointer */
+#define DMA2_3_CURR_X_COUNT 0xFFC00CF0 /* DMA2 Channel 3 Current Inner Loop Count */
+#define DMA2_3_CURR_Y_COUNT 0xFFC00CF8 /* DMA2 Channel 3 Current Outer Loop Count */
+#define DMA2_3_IRQ_STATUS 0xFFC00CE8 /* DMA2 Channel 3 Interrupt/Status Register */
+#define DMA2_3_PERIPHERAL_MAP 0xFFC00CEC /* DMA2 Channel 3 Peripheral Map Register */
+
+#define DMA2_4_CONFIG 0xFFC00D08 /* DMA2 Channel 4 Configuration register */
+#define DMA2_4_NEXT_DESC_PTR 0xFFC00D00 /* DMA2 Channel 4 Next Descripter Ptr Reg */
+#define DMA2_4_START_ADDR 0xFFC00D04 /* DMA2 Channel 4 Start Address */
+#define DMA2_4_X_COUNT 0xFFC00D10 /* DMA2 Channel 4 Inner Loop Count */
+#define DMA2_4_Y_COUNT 0xFFC00D18 /* DMA2 Channel 4 Outer Loop Count */
+#define DMA2_4_X_MODIFY 0xFFC00D14 /* DMA2 Channel 4 Inner Loop Addr Increment */
+#define DMA2_4_Y_MODIFY 0xFFC00D1C /* DMA2 Channel 4 Outer Loop Addr Increment */
+#define DMA2_4_CURR_DESC_PTR 0xFFC00D20 /* DMA2 Channel 4 Current Descriptor Pointer */
+#define DMA2_4_CURR_ADDR 0xFFC00D24 /* DMA2 Channel 4 Current Address Pointer */
+#define DMA2_4_CURR_X_COUNT 0xFFC00D30 /* DMA2 Channel 4 Current Inner Loop Count */
+#define DMA2_4_CURR_Y_COUNT 0xFFC00D38 /* DMA2 Channel 4 Current Outer Loop Count */
+#define DMA2_4_IRQ_STATUS 0xFFC00D28 /* DMA2 Channel 4 Interrupt/Status Register */
+#define DMA2_4_PERIPHERAL_MAP 0xFFC00D2C /* DMA2 Channel 4 Peripheral Map Register */
+
+#define DMA2_5_CONFIG 0xFFC00D48 /* DMA2 Channel 5 Configuration register */
+#define DMA2_5_NEXT_DESC_PTR 0xFFC00D40 /* DMA2 Channel 5 Next Descripter Ptr Reg */
+#define DMA2_5_START_ADDR 0xFFC00D44 /* DMA2 Channel 5 Start Address */
+#define DMA2_5_X_COUNT 0xFFC00D50 /* DMA2 Channel 5 Inner Loop Count */
+#define DMA2_5_Y_COUNT 0xFFC00D58 /* DMA2 Channel 5 Outer Loop Count */
+#define DMA2_5_X_MODIFY 0xFFC00D54 /* DMA2 Channel 5 Inner Loop Addr Increment */
+#define DMA2_5_Y_MODIFY 0xFFC00D5C /* DMA2 Channel 5 Outer Loop Addr Increment */
+#define DMA2_5_CURR_DESC_PTR 0xFFC00D60 /* DMA2 Channel 5 Current Descriptor Pointer */
+#define DMA2_5_CURR_ADDR 0xFFC00D64 /* DMA2 Channel 5 Current Address Pointer */
+#define DMA2_5_CURR_X_COUNT 0xFFC00D70 /* DMA2 Channel 5 Current Inner Loop Count */
+#define DMA2_5_CURR_Y_COUNT 0xFFC00D78 /* DMA2 Channel 5 Current Outer Loop Count */
+#define DMA2_5_IRQ_STATUS 0xFFC00D68 /* DMA2 Channel 5 Interrupt/Status Register */
+#define DMA2_5_PERIPHERAL_MAP 0xFFC00D6C /* DMA2 Channel 5 Peripheral Map Register */
+
+#define DMA2_6_CONFIG 0xFFC00D88 /* DMA2 Channel 6 Configuration register */
+#define DMA2_6_NEXT_DESC_PTR 0xFFC00D80 /* DMA2 Channel 6 Next Descripter Ptr Reg */
+#define DMA2_6_START_ADDR 0xFFC00D84 /* DMA2 Channel 6 Start Address */
+#define DMA2_6_X_COUNT 0xFFC00D90 /* DMA2 Channel 6 Inner Loop Count */
+#define DMA2_6_Y_COUNT 0xFFC00D98 /* DMA2 Channel 6 Outer Loop Count */
+#define DMA2_6_X_MODIFY 0xFFC00D94 /* DMA2 Channel 6 Inner Loop Addr Increment */
+#define DMA2_6_Y_MODIFY 0xFFC00D9C /* DMA2 Channel 6 Outer Loop Addr Increment */
+#define DMA2_6_CURR_DESC_PTR 0xFFC00DA0 /* DMA2 Channel 6 Current Descriptor Pointer */
+#define DMA2_6_CURR_ADDR 0xFFC00DA4 /* DMA2 Channel 6 Current Address Pointer */
+#define DMA2_6_CURR_X_COUNT 0xFFC00DB0 /* DMA2 Channel 6 Current Inner Loop Count */
+#define DMA2_6_CURR_Y_COUNT 0xFFC00DB8 /* DMA2 Channel 6 Current Outer Loop Count */
+#define DMA2_6_IRQ_STATUS 0xFFC00DA8 /* DMA2 Channel 6 Interrupt/Status Register */
+#define DMA2_6_PERIPHERAL_MAP 0xFFC00DAC /* DMA2 Channel 6 Peripheral Map Register */
+
+#define DMA2_7_CONFIG 0xFFC00DC8 /* DMA2 Channel 7 Configuration register */
+#define DMA2_7_NEXT_DESC_PTR 0xFFC00DC0 /* DMA2 Channel 7 Next Descripter Ptr Reg */
+#define DMA2_7_START_ADDR 0xFFC00DC4 /* DMA2 Channel 7 Start Address */
+#define DMA2_7_X_COUNT 0xFFC00DD0 /* DMA2 Channel 7 Inner Loop Count */
+#define DMA2_7_Y_COUNT 0xFFC00DD8 /* DMA2 Channel 7 Outer Loop Count */
+#define DMA2_7_X_MODIFY 0xFFC00DD4 /* DMA2 Channel 7 Inner Loop Addr Increment */
+#define DMA2_7_Y_MODIFY 0xFFC00DDC /* DMA2 Channel 7 Outer Loop Addr Increment */
+#define DMA2_7_CURR_DESC_PTR 0xFFC00DE0 /* DMA2 Channel 7 Current Descriptor Pointer */
+#define DMA2_7_CURR_ADDR 0xFFC00DE4 /* DMA2 Channel 7 Current Address Pointer */
+#define DMA2_7_CURR_X_COUNT 0xFFC00DF0 /* DMA2 Channel 7 Current Inner Loop Count */
+#define DMA2_7_CURR_Y_COUNT 0xFFC00DF8 /* DMA2 Channel 7 Current Outer Loop Count */
+#define DMA2_7_IRQ_STATUS 0xFFC00DE8 /* DMA2 Channel 7 Interrupt/Status Register */
+#define DMA2_7_PERIPHERAL_MAP 0xFFC00DEC /* DMA2 Channel 7 Peripheral Map Register */
+
+#define DMA2_8_CONFIG 0xFFC00E08 /* DMA2 Channel 8 Configuration register */
+#define DMA2_8_NEXT_DESC_PTR 0xFFC00E00 /* DMA2 Channel 8 Next Descripter Ptr Reg */
+#define DMA2_8_START_ADDR 0xFFC00E04 /* DMA2 Channel 8 Start Address */
+#define DMA2_8_X_COUNT 0xFFC00E10 /* DMA2 Channel 8 Inner Loop Count */
+#define DMA2_8_Y_COUNT 0xFFC00E18 /* DMA2 Channel 8 Outer Loop Count */
+#define DMA2_8_X_MODIFY 0xFFC00E14 /* DMA2 Channel 8 Inner Loop Addr Increment */
+#define DMA2_8_Y_MODIFY 0xFFC00E1C /* DMA2 Channel 8 Outer Loop Addr Increment */
+#define DMA2_8_CURR_DESC_PTR 0xFFC00E20 /* DMA2 Channel 8 Current Descriptor Pointer */
+#define DMA2_8_CURR_ADDR 0xFFC00E24 /* DMA2 Channel 8 Current Address Pointer */
+#define DMA2_8_CURR_X_COUNT 0xFFC00E30 /* DMA2 Channel 8 Current Inner Loop Count */
+#define DMA2_8_CURR_Y_COUNT 0xFFC00E38 /* DMA2 Channel 8 Current Outer Loop Count */
+#define DMA2_8_IRQ_STATUS 0xFFC00E28 /* DMA2 Channel 8 Interrupt/Status Register */
+#define DMA2_8_PERIPHERAL_MAP 0xFFC00E2C /* DMA2 Channel 8 Peripheral Map Register */
+
+#define DMA2_9_CONFIG 0xFFC00E48 /* DMA2 Channel 9 Configuration register */
+#define DMA2_9_NEXT_DESC_PTR 0xFFC00E40 /* DMA2 Channel 9 Next Descripter Ptr Reg */
+#define DMA2_9_START_ADDR 0xFFC00E44 /* DMA2 Channel 9 Start Address */
+#define DMA2_9_X_COUNT 0xFFC00E50 /* DMA2 Channel 9 Inner Loop Count */
+#define DMA2_9_Y_COUNT 0xFFC00E58 /* DMA2 Channel 9 Outer Loop Count */
+#define DMA2_9_X_MODIFY 0xFFC00E54 /* DMA2 Channel 9 Inner Loop Addr Increment */
+#define DMA2_9_Y_MODIFY 0xFFC00E5C /* DMA2 Channel 9 Outer Loop Addr Increment */
+#define DMA2_9_CURR_DESC_PTR 0xFFC00E60 /* DMA2 Channel 9 Current Descriptor Pointer */
+#define DMA2_9_CURR_ADDR 0xFFC00E64 /* DMA2 Channel 9 Current Address Pointer */
+#define DMA2_9_CURR_X_COUNT 0xFFC00E70 /* DMA2 Channel 9 Current Inner Loop Count */
+#define DMA2_9_CURR_Y_COUNT 0xFFC00E78 /* DMA2 Channel 9 Current Outer Loop Count */
+#define DMA2_9_IRQ_STATUS 0xFFC00E68 /* DMA2 Channel 9 Interrupt/Status Register */
+#define DMA2_9_PERIPHERAL_MAP 0xFFC00E6C /* DMA2 Channel 9 Peripheral Map Register */
+
+#define DMA2_10_CONFIG 0xFFC00E88 /* DMA2 Channel 10 Configuration register */
+#define DMA2_10_NEXT_DESC_PTR 0xFFC00E80 /* DMA2 Channel 10 Next Descripter Ptr Reg */
+#define DMA2_10_START_ADDR 0xFFC00E84 /* DMA2 Channel 10 Start Address */
+#define DMA2_10_X_COUNT 0xFFC00E90 /* DMA2 Channel 10 Inner Loop Count */
+#define DMA2_10_Y_COUNT 0xFFC00E98 /* DMA2 Channel 10 Outer Loop Count */
+#define DMA2_10_X_MODIFY 0xFFC00E94 /* DMA2 Channel 10 Inner Loop Addr Increment */
+#define DMA2_10_Y_MODIFY 0xFFC00E9C /* DMA2 Channel 10 Outer Loop Addr Increment */
+#define DMA2_10_CURR_DESC_PTR 0xFFC00EA0 /* DMA2 Channel 10 Current Descriptor Pointer */
+#define DMA2_10_CURR_ADDR 0xFFC00EA4 /* DMA2 Channel 10 Current Address Pointer */
+#define DMA2_10_CURR_X_COUNT 0xFFC00EB0 /* DMA2 Channel 10 Current Inner Loop Count */
+#define DMA2_10_CURR_Y_COUNT 0xFFC00EB8 /* DMA2 Channel 10 Current Outer Loop Count */
+#define DMA2_10_IRQ_STATUS 0xFFC00EA8 /* DMA2 Channel 10 Interrupt/Status Register */
+#define DMA2_10_PERIPHERAL_MAP 0xFFC00EAC /* DMA2 Channel 10 Peripheral Map Register */
+
+#define DMA2_11_CONFIG 0xFFC00EC8 /* DMA2 Channel 11 Configuration register */
+#define DMA2_11_NEXT_DESC_PTR 0xFFC00EC0 /* DMA2 Channel 11 Next Descripter Ptr Reg */
+#define DMA2_11_START_ADDR 0xFFC00EC4 /* DMA2 Channel 11 Start Address */
+#define DMA2_11_X_COUNT 0xFFC00ED0 /* DMA2 Channel 11 Inner Loop Count */
+#define DMA2_11_Y_COUNT 0xFFC00ED8 /* DMA2 Channel 11 Outer Loop Count */
+#define DMA2_11_X_MODIFY 0xFFC00ED4 /* DMA2 Channel 11 Inner Loop Addr Increment */
+#define DMA2_11_Y_MODIFY 0xFFC00EDC /* DMA2 Channel 11 Outer Loop Addr Increment */
+#define DMA2_11_CURR_DESC_PTR 0xFFC00EE0 /* DMA2 Channel 11 Current Descriptor Pointer */
+#define DMA2_11_CURR_ADDR 0xFFC00EE4 /* DMA2 Channel 11 Current Address Pointer */
+#define DMA2_11_CURR_X_COUNT 0xFFC00EF0 /* DMA2 Channel 11 Current Inner Loop Count */
+#define DMA2_11_CURR_Y_COUNT 0xFFC00EF8 /* DMA2 Channel 11 Current Outer Loop Count */
+#define DMA2_11_IRQ_STATUS 0xFFC00EE8 /* DMA2 Channel 11 Interrupt/Status Register */
+#define DMA2_11_PERIPHERAL_MAP 0xFFC00EEC /* DMA2 Channel 11 Peripheral Map Register */
+
+/* Memory DMA2 Controller registers (0xFFC0 0E80-0xFFC0 0FFF) */
+#define MDMA2_D0_CONFIG 0xFFC00F08 /*MemDMA2 Stream 0 Destination Configuration register */
+#define MDMA2_D0_NEXT_DESC_PTR 0xFFC00F00 /*MemDMA2 Stream 0 Destination Next Descriptor Ptr Reg */
+#define MDMA2_D0_START_ADDR 0xFFC00F04 /*MemDMA2 Stream 0 Destination Start Address */
+#define MDMA2_D0_X_COUNT 0xFFC00F10 /*MemDMA2 Stream 0 Dest Inner-Loop Count register */
+#define MDMA2_D0_Y_COUNT 0xFFC00F18 /*MemDMA2 Stream 0 Dest Outer-Loop Count register */
+#define MDMA2_D0_X_MODIFY 0xFFC00F14 /*MemDMA2 Stream 0 Dest Inner-Loop Address-Increment */
+#define MDMA2_D0_Y_MODIFY 0xFFC00F1C /*MemDMA2 Stream 0 Dest Outer-Loop Address-Increment */
+#define MDMA2_D0_CURR_DESC_PTR 0xFFC00F20 /*MemDMA2 Stream 0 Dest Current Descriptor Ptr reg */
+#define MDMA2_D0_CURR_ADDR 0xFFC00F24 /*MemDMA2 Stream 0 Destination Current Address */
+#define MDMA2_D0_CURR_X_COUNT 0xFFC00F30 /*MemDMA2 Stream 0 Dest Current Inner-Loop Count reg */
+#define MDMA2_D0_CURR_Y_COUNT 0xFFC00F38 /*MemDMA2 Stream 0 Dest Current Outer-Loop Count reg */
+#define MDMA2_D0_IRQ_STATUS 0xFFC00F28 /*MemDMA2 Stream 0 Dest Interrupt/Status Register */
+#define MDMA2_D0_PERIPHERAL_MAP 0xFFC00F2C /*MemDMA2 Stream 0 Destination Peripheral Map register */
+
+#define MDMA2_S0_CONFIG 0xFFC00F48 /*MemDMA2 Stream 0 Source Configuration register */
+#define MDMA2_S0_NEXT_DESC_PTR 0xFFC00F40 /*MemDMA2 Stream 0 Source Next Descriptor Ptr Reg */
+#define MDMA2_S0_START_ADDR 0xFFC00F44 /*MemDMA2 Stream 0 Source Start Address */
+#define MDMA2_S0_X_COUNT 0xFFC00F50 /*MemDMA2 Stream 0 Source Inner-Loop Count register */
+#define MDMA2_S0_Y_COUNT 0xFFC00F58 /*MemDMA2 Stream 0 Source Outer-Loop Count register */
+#define MDMA2_S0_X_MODIFY 0xFFC00F54 /*MemDMA2 Stream 0 Src Inner-Loop Addr-Increment reg */
+#define MDMA2_S0_Y_MODIFY 0xFFC00F5C /*MemDMA2 Stream 0 Src Outer-Loop Addr-Increment reg */
+#define MDMA2_S0_CURR_DESC_PTR 0xFFC00F60 /*MemDMA2 Stream 0 Source Current Descriptor Ptr reg */
+#define MDMA2_S0_CURR_ADDR 0xFFC00F64 /*MemDMA2 Stream 0 Source Current Address */
+#define MDMA2_S0_CURR_X_COUNT 0xFFC00F70 /*MemDMA2 Stream 0 Src Current Inner-Loop Count reg */
+#define MDMA2_S0_CURR_Y_COUNT 0xFFC00F78 /*MemDMA2 Stream 0 Src Current Outer-Loop Count reg */
+#define MDMA2_S0_IRQ_STATUS 0xFFC00F68 /*MemDMA2 Stream 0 Source Interrupt/Status Register */
+#define MDMA2_S0_PERIPHERAL_MAP 0xFFC00F6C /*MemDMA2 Stream 0 Source Peripheral Map register */
+
+#define MDMA2_D1_CONFIG 0xFFC00F88 /*MemDMA2 Stream 1 Destination Configuration register */
+#define MDMA2_D1_NEXT_DESC_PTR 0xFFC00F80 /*MemDMA2 Stream 1 Destination Next Descriptor Ptr Reg */
+#define MDMA2_D1_START_ADDR 0xFFC00F84 /*MemDMA2 Stream 1 Destination Start Address */
+#define MDMA2_D1_X_COUNT 0xFFC00F90 /*MemDMA2 Stream 1 Dest Inner-Loop Count register */
+#define MDMA2_D1_Y_COUNT 0xFFC00F98 /*MemDMA2 Stream 1 Dest Outer-Loop Count register */
+#define MDMA2_D1_X_MODIFY 0xFFC00F94 /*MemDMA2 Stream 1 Dest Inner-Loop Address-Increment */
+#define MDMA2_D1_Y_MODIFY 0xFFC00F9C /*MemDMA2 Stream 1 Dest Outer-Loop Address-Increment */
+#define MDMA2_D1_CURR_DESC_PTR 0xFFC00FA0 /*MemDMA2 Stream 1 Destination Current Descriptor Ptr */
+#define MDMA2_D1_CURR_ADDR 0xFFC00FA4 /*MemDMA2 Stream 1 Destination Current Address reg */
+#define MDMA2_D1_CURR_X_COUNT 0xFFC00FB0 /*MemDMA2 Stream 1 Dest Current Inner-Loop Count reg */
+#define MDMA2_D1_CURR_Y_COUNT 0xFFC00FB8 /*MemDMA2 Stream 1 Dest Current Outer-Loop Count reg */
+#define MDMA2_D1_IRQ_STATUS 0xFFC00FA8 /*MemDMA2 Stream 1 Destination Interrupt/Status Reg */
+#define MDMA2_D1_PERIPHERAL_MAP 0xFFC00FAC /*MemDMA2 Stream 1 Destination Peripheral Map register */
+
+#define MDMA2_S1_CONFIG 0xFFC00FC8 /*MemDMA2 Stream 1 Source Configuration register */
+#define MDMA2_S1_NEXT_DESC_PTR 0xFFC00FC0 /*MemDMA2 Stream 1 Source Next Descriptor Ptr Reg */
+#define MDMA2_S1_START_ADDR 0xFFC00FC4 /*MemDMA2 Stream 1 Source Start Address */
+#define MDMA2_S1_X_COUNT 0xFFC00FD0 /*MemDMA2 Stream 1 Source Inner-Loop Count register */
+#define MDMA2_S1_Y_COUNT 0xFFC00FD8 /*MemDMA2 Stream 1 Source Outer-Loop Count register */
+#define MDMA2_S1_X_MODIFY 0xFFC00FD4 /*MemDMA2 Stream 1 Src Inner-Loop Address-Increment */
+#define MDMA2_S1_Y_MODIFY 0xFFC00FDC /*MemDMA2 Stream 1 Source Outer-Loop Address-Increment */
+#define MDMA2_S1_CURR_DESC_PTR 0xFFC00FE0 /*MemDMA2 Stream 1 Source Current Descriptor Ptr reg */
+#define MDMA2_S1_CURR_ADDR 0xFFC00FE4 /*MemDMA2 Stream 1 Source Current Address */
+#define MDMA2_S1_CURR_X_COUNT 0xFFC00FF0 /*MemDMA2 Stream 1 Source Current Inner-Loop Count */
+#define MDMA2_S1_CURR_Y_COUNT 0xFFC00FF8 /*MemDMA2 Stream 1 Source Current Outer-Loop Count */
+#define MDMA2_S1_IRQ_STATUS 0xFFC00FE8 /*MemDMA2 Stream 1 Source Interrupt/Status Register */
+#define MDMA2_S1_PERIPHERAL_MAP 0xFFC00FEC /*MemDMA2 Stream 1 Source Peripheral Map register */
+
+/* Internal Memory DMA Registers (0xFFC0_1800 - 0xFFC0_19FF) */
+#define IMDMA_D0_CONFIG 0xFFC01808 /*IMDMA Stream 0 Destination Configuration */
+#define IMDMA_D0_NEXT_DESC_PTR 0xFFC01800 /*IMDMA Stream 0 Destination Next Descriptor Ptr Reg */
+#define IMDMA_D0_START_ADDR 0xFFC01804 /*IMDMA Stream 0 Destination Start Address */
+#define IMDMA_D0_X_COUNT 0xFFC01810 /*IMDMA Stream 0 Destination Inner-Loop Count */
+#define IMDMA_D0_Y_COUNT 0xFFC01818 /*IMDMA Stream 0 Destination Outer-Loop Count */
+#define IMDMA_D0_X_MODIFY 0xFFC01814 /*IMDMA Stream 0 Dest Inner-Loop Address-Increment */
+#define IMDMA_D0_Y_MODIFY 0xFFC0181C /*IMDMA Stream 0 Dest Outer-Loop Address-Increment */
+#define IMDMA_D0_CURR_DESC_PTR 0xFFC01820 /*IMDMA Stream 0 Destination Current Descriptor Ptr */
+#define IMDMA_D0_CURR_ADDR 0xFFC01824 /*IMDMA Stream 0 Destination Current Address */
+#define IMDMA_D0_CURR_X_COUNT 0xFFC01830 /*IMDMA Stream 0 Destination Current Inner-Loop Count */
+#define IMDMA_D0_CURR_Y_COUNT 0xFFC01838 /*IMDMA Stream 0 Destination Current Outer-Loop Count */
+#define IMDMA_D0_IRQ_STATUS 0xFFC01828 /*IMDMA Stream 0 Destination Interrupt/Status */
+
+#define IMDMA_S0_CONFIG 0xFFC01848 /*IMDMA Stream 0 Source Configuration */
+#define IMDMA_S0_NEXT_DESC_PTR 0xFFC01840 /*IMDMA Stream 0 Source Next Descriptor Ptr Reg */
+#define IMDMA_S0_START_ADDR 0xFFC01844 /*IMDMA Stream 0 Source Start Address */
+#define IMDMA_S0_X_COUNT 0xFFC01850 /*IMDMA Stream 0 Source Inner-Loop Count */
+#define IMDMA_S0_Y_COUNT 0xFFC01858 /*IMDMA Stream 0 Source Outer-Loop Count */
+#define IMDMA_S0_X_MODIFY 0xFFC01854 /*IMDMA Stream 0 Source Inner-Loop Address-Increment */
+#define IMDMA_S0_Y_MODIFY 0xFFC0185C /*IMDMA Stream 0 Source Outer-Loop Address-Increment */
+#define IMDMA_S0_CURR_DESC_PTR 0xFFC01860 /*IMDMA Stream 0 Source Current Descriptor Ptr reg */
+#define IMDMA_S0_CURR_ADDR 0xFFC01864 /*IMDMA Stream 0 Source Current Address */
+#define IMDMA_S0_CURR_X_COUNT 0xFFC01870 /*IMDMA Stream 0 Source Current Inner-Loop Count */
+#define IMDMA_S0_CURR_Y_COUNT 0xFFC01878 /*IMDMA Stream 0 Source Current Outer-Loop Count */
+#define IMDMA_S0_IRQ_STATUS 0xFFC01868 /*IMDMA Stream 0 Source Interrupt/Status */
+
+#define IMDMA_D1_CONFIG 0xFFC01888 /*IMDMA Stream 1 Destination Configuration */
+#define IMDMA_D1_NEXT_DESC_PTR 0xFFC01880 /*IMDMA Stream 1 Destination Next Descriptor Ptr Reg */
+#define IMDMA_D1_START_ADDR 0xFFC01884 /*IMDMA Stream 1 Destination Start Address */
+#define IMDMA_D1_X_COUNT 0xFFC01890 /*IMDMA Stream 1 Destination Inner-Loop Count */
+#define IMDMA_D1_Y_COUNT 0xFFC01898 /*IMDMA Stream 1 Destination Outer-Loop Count */
+#define IMDMA_D1_X_MODIFY 0xFFC01894 /*IMDMA Stream 1 Dest Inner-Loop Address-Increment */
+#define IMDMA_D1_Y_MODIFY 0xFFC0189C /*IMDMA Stream 1 Dest Outer-Loop Address-Increment */
+#define IMDMA_D1_CURR_DESC_PTR 0xFFC018A0 /*IMDMA Stream 1 Destination Current Descriptor Ptr */
+#define IMDMA_D1_CURR_ADDR 0xFFC018A4 /*IMDMA Stream 1 Destination Current Address */
+#define IMDMA_D1_CURR_X_COUNT 0xFFC018B0 /*IMDMA Stream 1 Destination Current Inner-Loop Count */
+#define IMDMA_D1_CURR_Y_COUNT 0xFFC018B8 /*IMDMA Stream 1 Destination Current Outer-Loop Count */
+#define IMDMA_D1_IRQ_STATUS 0xFFC018A8 /*IMDMA Stream 1 Destination Interrupt/Status */
+
+#define IMDMA_S1_CONFIG 0xFFC018C8 /*IMDMA Stream 1 Source Configuration */
+#define IMDMA_S1_NEXT_DESC_PTR 0xFFC018C0 /*IMDMA Stream 1 Source Next Descriptor Ptr Reg */
+#define IMDMA_S1_START_ADDR 0xFFC018C4 /*IMDMA Stream 1 Source Start Address */
+#define IMDMA_S1_X_COUNT 0xFFC018D0 /*IMDMA Stream 1 Source Inner-Loop Count */
+#define IMDMA_S1_Y_COUNT 0xFFC018D8 /*IMDMA Stream 1 Source Outer-Loop Count */
+#define IMDMA_S1_X_MODIFY 0xFFC018D4 /*IMDMA Stream 1 Source Inner-Loop Address-Increment */
+#define IMDMA_S1_Y_MODIFY 0xFFC018DC /*IMDMA Stream 1 Source Outer-Loop Address-Increment */
+#define IMDMA_S1_CURR_DESC_PTR 0xFFC018E0 /*IMDMA Stream 1 Source Current Descriptor Ptr reg */
+#define IMDMA_S1_CURR_ADDR 0xFFC018E4 /*IMDMA Stream 1 Source Current Address */
+#define IMDMA_S1_CURR_X_COUNT 0xFFC018F0 /*IMDMA Stream 1 Source Current Inner-Loop Count */
+#define IMDMA_S1_CURR_Y_COUNT 0xFFC018F8 /*IMDMA Stream 1 Source Current Outer-Loop Count */
+#define IMDMA_S1_IRQ_STATUS 0xFFC018E8 /*IMDMA Stream 1 Source Interrupt/Status */
+
+/*********************************************************************************** */
+/* System MMR Register Bits */
+/******************************************************************************* */
+
+/* ********************* PLL AND RESET MASKS ************************ */
+
+/* PLL_CTL Masks */
+#define PLL_CLKIN 0x00000000 /* Pass CLKIN to PLL */
+#define PLL_CLKIN_DIV2 0x00000001 /* Pass CLKIN/2 to PLL */
+#define PLL_OFF 0x00000002 /* Shut off PLL clocks */
+#define STOPCK_OFF 0x00000008 /* Core clock off */
+#define PDWN 0x00000020 /* Put the PLL in a Deep Sleep state */
+#define BYPASS 0x00000100 /* Bypass the PLL */
+
+/* CHIPID Masks */
+#define CHIPID_VERSION 0xF0000000
+#define CHIPID_FAMILY 0x0FFFF000
+#define CHIPID_MANUFACTURE 0x00000FFE
+
+/* PLL_DIV Masks */
+#define SCLK_DIV(x) (x) /* SCLK = VCO / x */
+
+#define CCLK_DIV1 0x00000000 /* CCLK = VCO / 1 */
+#define CCLK_DIV2 0x00000010 /* CCLK = VCO / 2 */
+#define CCLK_DIV4 0x00000020 /* CCLK = VCO / 4 */
+#define CCLK_DIV8 0x00000030 /* CCLK = VCO / 8 */
+
+/* PLL_STAT Masks */
+#define ACTIVE_PLLENABLED 0x0001 /* Processor In Active Mode With PLL Enabled */
+#define FULL_ON 0x0002 /* Processor In Full On Mode */
+#define ACTIVE_PLLDISABLED 0x0004 /* Processor In Active Mode With PLL Disabled */
+#define PLL_LOCKED 0x0020 /* PLL_LOCKCNT Has Been Reached */
+
+/* SWRST Mask */
+#define SYSTEM_RESET 0x00000007 /* Initiates a system software reset */
+#define SWRST_DBL_FAULT_B 0x00000800 /* SWRST Core B Double Fault */
+#define SWRST_DBL_FAULT_A 0x00001000 /* SWRST Core A Double Fault */
+#define SWRST_WDT_B 0x00002000 /* SWRST Watchdog B */
+#define SWRST_WDT_A 0x00004000 /* SWRST Watchdog A */
+#define SWRST_OCCURRED 0x00008000 /* SWRST Status */
+
+/* ************* SYSTEM INTERRUPT CONTROLLER MASKS ***************** */
+
+/* SICu_IARv Masks */
+/* u = A or B */
+/* v = 0 to 7 */
+/* w = 0 or 1 */
+
+/* Per_number = 0 to 63 */
+/* IVG_number = 7 to 15 */
+#define Peripheral_IVG(Per_number, IVG_number) \
+ ((IVG_number) - 7) << (((Per_number) % 8) * 4) /* Peripheral #Per_number assigned IVG #IVG_number */
+ /* Usage: r0.l = lo(Peripheral_IVG(62, 10)); */
+ /* r0.h = hi(Peripheral_IVG(62, 10)); */
+
+/* SICx_IMASKw Masks */
+/* masks are 32 bit wide, so two writes reguired for "64 bit" wide registers */
+#define SIC_UNMASK_ALL 0x00000000 /* Unmask all peripheral interrupts */
+#define SIC_MASK_ALL 0xFFFFFFFF /* Mask all peripheral interrupts */
+#define SIC_MASK(x) (1 << (x)) /* Mask Peripheral #x interrupt */
+#define SIC_UNMASK(x) (0xFFFFFFFF ^ (1 << (x))) /* Unmask Peripheral #x interrupt */
+
+/* SIC_IWR Masks */
+#define IWR_DISABLE_ALL 0x00000000 /* Wakeup Disable all peripherals */
+#define IWR_ENABLE_ALL 0xFFFFFFFF /* Wakeup Enable all peripherals */
+/* x = pos 0 to 31, for 32-63 use value-32 */
+#define IWR_ENABLE(x) (1 << (x)) /* Wakeup Enable Peripheral #x */
+#define IWR_DISABLE(x) (0xFFFFFFFF ^ (1 << (x))) /* Wakeup Disable Peripheral #x */
+
+/* ********* WATCHDOG TIMER MASKS ********************8 */
+
+/* Watchdog Timer WDOG_CTL Register */
+#define ICTL(x) ((x<<1) & 0x0006)
+#define ENABLE_RESET 0x00000000 /* Set Watchdog Timer to generate reset */
+#define ENABLE_NMI 0x00000002 /* Set Watchdog Timer to generate non-maskable interrupt */
+#define ENABLE_GPI 0x00000004 /* Set Watchdog Timer to generate general-purpose interrupt */
+#define DISABLE_EVT 0x00000006 /* Disable Watchdog Timer interrupts */
+
+#define TMR_EN 0x0000
+#define TMR_DIS 0x0AD0
+#define TRO 0x8000
+
+#define ICTL_P0 0x01
+#define ICTL_P1 0x02
+#define TRO_P 0x0F
+
+/* ***************************** UART CONTROLLER MASKS ********************** */
+
+/* UART_LCR Register */
+
+#define DLAB 0x80
+#define SB 0x40
+#define STP 0x20
+#define EPS 0x10
+#define PEN 0x08
+#define STB 0x04
+#define WLS(x) ((x-5) & 0x03)
+
+#define DLAB_P 0x07
+#define SB_P 0x06
+#define STP_P 0x05
+#define EPS_P 0x04
+#define PEN_P 0x03
+#define STB_P 0x02
+#define WLS_P1 0x01
+#define WLS_P0 0x00
+
+/* UART_MCR Register */
+#define LOOP_ENA 0x10
+#define LOOP_ENA_P 0x04
+
+/* UART_LSR Register */
+#define TEMT 0x40
+#define THRE 0x20
+#define BI 0x10
+#define FE 0x08
+#define PE 0x04
+#define OE 0x02
+#define DR 0x01
+
+#define TEMP_P 0x06
+#define THRE_P 0x05
+#define BI_P 0x04
+#define FE_P 0x03
+#define PE_P 0x02
+#define OE_P 0x01
+#define DR_P 0x00
+
+/* UART_IER Register */
+#define ELSI 0x04
+#define ETBEI 0x02
+#define ERBFI 0x01
+
+#define ELSI_P 0x02
+#define ETBEI_P 0x01
+#define ERBFI_P 0x00
+
+/* UART_IIR Register */
+#define STATUS(x) ((x << 1) & 0x06)
+#define NINT 0x01
+#define STATUS_P1 0x02
+#define STATUS_P0 0x01
+#define NINT_P 0x00
+#define IIR_TX_READY 0x02 /* UART_THR empty */
+#define IIR_RX_READY 0x04 /* Receive data ready */
+#define IIR_LINE_CHANGE 0x06 /* Receive line status */
+#define IIR_STATUS 0x06
+
+/* UART_GCTL Register */
+#define FFE 0x20
+#define FPE 0x10
+#define RPOLC 0x08
+#define TPOLC 0x04
+#define IREN 0x02
+#define UCEN 0x01
+
+#define FFE_P 0x05
+#define FPE_P 0x04
+#define RPOLC_P 0x03
+#define TPOLC_P 0x02
+#define IREN_P 0x01
+#define UCEN_P 0x00
+
+/* ********** SERIAL PORT MASKS ********************** */
+
+/* SPORTx_TCR1 Masks */
+#define TSPEN 0x0001 /* TX enable */
+#define ITCLK 0x0002 /* Internal TX Clock Select */
+#define TDTYPE 0x000C /* TX Data Formatting Select */
+#define TLSBIT 0x0010 /* TX Bit Order */
+#define ITFS 0x0200 /* Internal TX Frame Sync Select */
+#define TFSR 0x0400 /* TX Frame Sync Required Select */
+#define DITFS 0x0800 /* Data Independent TX Frame Sync Select */
+#define LTFS 0x1000 /* Low TX Frame Sync Select */
+#define LATFS 0x2000 /* Late TX Frame Sync Select */
+#define TCKFE 0x4000 /* TX Clock Falling Edge Select */
+
+/* SPORTx_TCR2 Masks */
+#define SLEN 0x001F /*TX Word Length */
+#define TXSE 0x0100 /*TX Secondary Enable */
+#define TSFSE 0x0200 /*TX Stereo Frame Sync Enable */
+#define TRFST 0x0400 /*TX Right-First Data Order */
+
+/* SPORTx_RCR1 Masks */
+#define RSPEN 0x0001 /* RX enable */
+#define IRCLK 0x0002 /* Internal RX Clock Select */
+#define RDTYPE 0x000C /* RX Data Formatting Select */
+#define RULAW 0x0008 /* u-Law enable */
+#define RALAW 0x000C /* A-Law enable */
+#define RLSBIT 0x0010 /* RX Bit Order */
+#define IRFS 0x0200 /* Internal RX Frame Sync Select */
+#define RFSR 0x0400 /* RX Frame Sync Required Select */
+#define LRFS 0x1000 /* Low RX Frame Sync Select */
+#define LARFS 0x2000 /* Late RX Frame Sync Select */
+#define RCKFE 0x4000 /* RX Clock Falling Edge Select */
+
+/* SPORTx_RCR2 Masks */
+#define SLEN 0x001F /*RX Word Length */
+#define RXSE 0x0100 /*RX Secondary Enable */
+#define RSFSE 0x0200 /*RX Stereo Frame Sync Enable */
+#define RRFST 0x0400 /*Right-First Data Order */
+
+/*SPORTx_STAT Masks */
+#define RXNE 0x0001 /*RX FIFO Not Empty Status */
+#define RUVF 0x0002 /*RX Underflow Status */
+#define ROVF 0x0004 /*RX Overflow Status */
+#define TXF 0x0008 /*TX FIFO Full Status */
+#define TUVF 0x0010 /*TX Underflow Status */
+#define TOVF 0x0020 /*TX Overflow Status */
+#define TXHRE 0x0040 /*TX Hold Register Empty */
+
+/*SPORTx_MCMC1 Masks */
+#define SP_WSIZE 0x0000F000 /*Multichannel Window Size Field */
+#define SP_WOFF 0x000003FF /*Multichannel Window Offset Field */
+
+/*SPORTx_MCMC2 Masks */
+#define MCCRM 0x00000003 /*Multichannel Clock Recovery Mode */
+#define MCDTXPE 0x00000004 /*Multichannel DMA Transmit Packing */
+#define MCDRXPE 0x00000008 /*Multichannel DMA Receive Packing */
+#define MCMEN 0x00000010 /*Multichannel Frame Mode Enable */
+#define FSDR 0x00000080 /*Multichannel Frame Sync to Data Relationship */
+#define MFD 0x0000F000 /*Multichannel Frame Delay */
+
+/* ********* PARALLEL PERIPHERAL INTERFACE (PPI) MASKS **************** */
+
+/* PPI_CONTROL Masks */
+#define PORT_EN 0x00000001 /* PPI Port Enable */
+#define PORT_DIR 0x00000002 /* PPI Port Direction */
+#define XFR_TYPE 0x0000000C /* PPI Transfer Type */
+#define PORT_CFG 0x00000030 /* PPI Port Configuration */
+#define FLD_SEL 0x00000040 /* PPI Active Field Select */
+#define PACK_EN 0x00000080 /* PPI Packing Mode */
+#define DMA32 0x00000100 /* PPI 32-bit DMA Enable */
+#define SKIP_EN 0x00000200 /* PPI Skip Element Enable */
+#define SKIP_EO 0x00000400 /* PPI Skip Even/Odd Elements */
+#define DLENGTH 0x00003800 /* PPI Data Length */
+#define DLEN_8 0x0 /* PPI Data Length mask for DLEN=8 */
+#define DLEN(x) (((x-9) & 0x07) << 11) /* PPI Data Length (only works for x=10-->x=16) */
+#define POL 0x0000C000 /* PPI Signal Polarities */
+
+/* PPI_STATUS Masks */
+#define FLD 0x00000400 /* Field Indicator */
+#define FT_ERR 0x00000800 /* Frame Track Error */
+#define OVR 0x00001000 /* FIFO Overflow Error */
+#define UNDR 0x00002000 /* FIFO Underrun Error */
+#define ERR_DET 0x00004000 /* Error Detected Indicator */
+#define ERR_NCOR 0x00008000 /* Error Not Corrected Indicator */
+
+/* ********** DMA CONTROLLER MASKS *********************8 */
+
+/* DMAx_CONFIG, MDMA_yy_CONFIG, IMDMA_yy_CONFIG Masks */
+#define DMAEN 0x00000001 /* Channel Enable */
+#define WNR 0x00000002 /* Channel Direction (W/R*) */
+#define WDSIZE_8 0x00000000 /* Word Size 8 bits */
+#define WDSIZE_16 0x00000004 /* Word Size 16 bits */
+#define WDSIZE_32 0x00000008 /* Word Size 32 bits */
+#define DMA2D 0x00000010 /* 2D/1D* Mode */
+#define RESTART 0x00000020 /* Restart */
+#define DI_SEL 0x00000040 /* Data Interrupt Select */
+#define DI_EN 0x00000080 /* Data Interrupt Enable */
+#define NDSIZE_0 0x0000 /* Next Descriptor Size = 0 (Stop/Autobuffer) */
+#define NDSIZE_1 0x0100 /* Next Descriptor Size = 1 */
+#define NDSIZE_2 0x0200 /* Next Descriptor Size = 2 */
+#define NDSIZE_3 0x0300 /* Next Descriptor Size = 3 */
+#define NDSIZE_4 0x0400 /* Next Descriptor Size = 4 */
+#define NDSIZE_5 0x0500 /* Next Descriptor Size = 5 */
+#define NDSIZE_6 0x0600 /* Next Descriptor Size = 6 */
+#define NDSIZE_7 0x0700 /* Next Descriptor Size = 7 */
+#define NDSIZE_8 0x0800 /* Next Descriptor Size = 8 */
+#define NDSIZE_9 0x0900 /* Next Descriptor Size = 9 */
+#define NDSIZE 0x00000900 /* Next Descriptor Size */
+#define DMAFLOW 0x00007000 /* Flow Control */
+#define DMAFLOW_STOP 0x0000 /* Stop Mode */
+#define DMAFLOW_AUTO 0x1000 /* Autobuffer Mode */
+#define DMAFLOW_ARRAY 0x4000 /* Descriptor Array Mode */
+#define DMAFLOW_SMALL 0x6000 /* Small Model Descriptor List Mode */
+#define DMAFLOW_LARGE 0x7000 /* Large Model Descriptor List Mode */
+
+#define DMAEN_P 0 /* Channel Enable */
+#define WNR_P 1 /* Channel Direction (W/R*) */
+#define DMA2D_P 4 /* 2D/1D* Mode */
+#define RESTART_P 5 /* Restart */
+#define DI_SEL_P 6 /* Data Interrupt Select */
+#define DI_EN_P 7 /* Data Interrupt Enable */
+
+/* DMAx_IRQ_STATUS, MDMA_yy_IRQ_STATUS, IMDMA_yy_IRQ_STATUS Masks */
+
+#define DMA_DONE 0x00000001 /* DMA Done Indicator */
+#define DMA_ERR 0x00000002 /* DMA Error Indicator */
+#define DFETCH 0x00000004 /* Descriptor Fetch Indicator */
+#define DMA_RUN 0x00000008 /* DMA Running Indicator */
+
+#define DMA_DONE_P 0 /* DMA Done Indicator */
+#define DMA_ERR_P 1 /* DMA Error Indicator */
+#define DFETCH_P 2 /* Descriptor Fetch Indicator */
+#define DMA_RUN_P 3 /* DMA Running Indicator */
+
+/* DMAx_PERIPHERAL_MAP, MDMA_yy_PERIPHERAL_MAP, IMDMA_yy_PERIPHERAL_MAP Masks */
+
+#define CTYPE 0x00000040 /* DMA Channel Type Indicator */
+#define CTYPE_P 6 /* DMA Channel Type Indicator BIT POSITION */
+#define PCAP8 0x00000080 /* DMA 8-bit Operation Indicator */
+#define PCAP16 0x00000100 /* DMA 16-bit Operation Indicator */
+#define PCAP32 0x00000200 /* DMA 32-bit Operation Indicator */
+#define PCAPWR 0x00000400 /* DMA Write Operation Indicator */
+#define PCAPRD 0x00000800 /* DMA Read Operation Indicator */
+#define PMAP 0x00007000 /* DMA Peripheral Map Field */
+
+/* ************* GENERAL PURPOSE TIMER MASKS ******************** */
+
+/* PWM Timer bit definitions */
+
+/* TIMER_ENABLE Register */
+#define TIMEN0 0x0001
+#define TIMEN1 0x0002
+#define TIMEN2 0x0004
+#define TIMEN3 0x0008
+#define TIMEN4 0x0010
+#define TIMEN5 0x0020
+#define TIMEN6 0x0040
+#define TIMEN7 0x0080
+#define TIMEN8 0x0001
+#define TIMEN9 0x0002
+#define TIMEN10 0x0004
+#define TIMEN11 0x0008
+
+#define TIMEN0_P 0x00
+#define TIMEN1_P 0x01
+#define TIMEN2_P 0x02
+#define TIMEN3_P 0x03
+#define TIMEN4_P 0x04
+#define TIMEN5_P 0x05
+#define TIMEN6_P 0x06
+#define TIMEN7_P 0x07
+#define TIMEN8_P 0x00
+#define TIMEN9_P 0x01
+#define TIMEN10_P 0x02
+#define TIMEN11_P 0x03
+
+/* TIMER_DISABLE Register */
+#define TIMDIS0 0x0001
+#define TIMDIS1 0x0002
+#define TIMDIS2 0x0004
+#define TIMDIS3 0x0008
+#define TIMDIS4 0x0010
+#define TIMDIS5 0x0020
+#define TIMDIS6 0x0040
+#define TIMDIS7 0x0080
+#define TIMDIS8 0x0001
+#define TIMDIS9 0x0002
+#define TIMDIS10 0x0004
+#define TIMDIS11 0x0008
+
+#define TIMDIS0_P 0x00
+#define TIMDIS1_P 0x01
+#define TIMDIS2_P 0x02
+#define TIMDIS3_P 0x03
+#define TIMDIS4_P 0x04
+#define TIMDIS5_P 0x05
+#define TIMDIS6_P 0x06
+#define TIMDIS7_P 0x07
+#define TIMDIS8_P 0x00
+#define TIMDIS9_P 0x01
+#define TIMDIS10_P 0x02
+#define TIMDIS11_P 0x03
+
+/* TIMER_STATUS Register */
+#define TIMIL0 0x00000001
+#define TIMIL1 0x00000002
+#define TIMIL2 0x00000004
+#define TIMIL3 0x00000008
+#define TIMIL4 0x00010000
+#define TIMIL5 0x00020000
+#define TIMIL6 0x00040000
+#define TIMIL7 0x00080000
+#define TIMIL8 0x0001
+#define TIMIL9 0x0002
+#define TIMIL10 0x0004
+#define TIMIL11 0x0008
+#define TOVL_ERR0 0x00000010
+#define TOVL_ERR1 0x00000020
+#define TOVL_ERR2 0x00000040
+#define TOVL_ERR3 0x00000080
+#define TOVL_ERR4 0x00100000
+#define TOVL_ERR5 0x00200000
+#define TOVL_ERR6 0x00400000
+#define TOVL_ERR7 0x00800000
+#define TOVL_ERR8 0x0010
+#define TOVL_ERR9 0x0020
+#define TOVL_ERR10 0x0040
+#define TOVL_ERR11 0x0080
+#define TRUN0 0x00001000
+#define TRUN1 0x00002000
+#define TRUN2 0x00004000
+#define TRUN3 0x00008000
+#define TRUN4 0x10000000
+#define TRUN5 0x20000000
+#define TRUN6 0x40000000
+#define TRUN7 0x80000000
+#define TRUN8 0x1000
+#define TRUN9 0x2000
+#define TRUN10 0x4000
+#define TRUN11 0x8000
+
+#define TIMIL0_P 0x00
+#define TIMIL1_P 0x01
+#define TIMIL2_P 0x02
+#define TIMIL3_P 0x03
+#define TIMIL4_P 0x10
+#define TIMIL5_P 0x11
+#define TIMIL6_P 0x12
+#define TIMIL7_P 0x13
+#define TIMIL8_P 0x00
+#define TIMIL9_P 0x01
+#define TIMIL10_P 0x02
+#define TIMIL11_P 0x03
+#define TOVL_ERR0_P 0x04
+#define TOVL_ERR1_P 0x05
+#define TOVL_ERR2_P 0x06
+#define TOVL_ERR3_P 0x07
+#define TOVL_ERR4_P 0x14
+#define TOVL_ERR5_P 0x15
+#define TOVL_ERR6_P 0x16
+#define TOVL_ERR7_P 0x17
+#define TOVL_ERR8_P 0x04
+#define TOVL_ERR9_P 0x05
+#define TOVL_ERR10_P 0x06
+#define TOVL_ERR11_P 0x07
+#define TRUN0_P 0x0C
+#define TRUN1_P 0x0D
+#define TRUN2_P 0x0E
+#define TRUN3_P 0x0F
+#define TRUN4_P 0x1C
+#define TRUN5_P 0x1D
+#define TRUN6_P 0x1E
+#define TRUN7_P 0x1F
+#define TRUN8_P 0x0C
+#define TRUN9_P 0x0D
+#define TRUN10_P 0x0E
+#define TRUN11_P 0x0F
+
+/* TIMERx_CONFIG Registers */
+#define PWM_OUT 0x0001
+#define WDTH_CAP 0x0002
+#define EXT_CLK 0x0003
+#define PULSE_HI 0x0004
+#define PERIOD_CNT 0x0008
+#define IRQ_ENA 0x0010
+#define TIN_SEL 0x0020
+#define OUT_DIS 0x0040
+#define CLK_SEL 0x0080
+#define TOGGLE_HI 0x0100
+#define EMU_RUN 0x0200
+#define ERR_TYP(x) ((x & 0x03) << 14)
+
+#define TMODE_P0 0x00
+#define TMODE_P1 0x01
+#define PULSE_HI_P 0x02
+#define PERIOD_CNT_P 0x03
+#define IRQ_ENA_P 0x04
+#define TIN_SEL_P 0x05
+#define OUT_DIS_P 0x06
+#define CLK_SEL_P 0x07
+#define TOGGLE_HI_P 0x08
+#define EMU_RUN_P 0x09
+#define ERR_TYP_P0 0x0E
+#define ERR_TYP_P1 0x0F
+
+/*/ ****************** PROGRAMMABLE FLAG MASKS ********************* */
+
+/* General Purpose IO (0xFFC00700 - 0xFFC007FF) Masks */
+#define PF0 0x0001
+#define PF1 0x0002
+#define PF2 0x0004
+#define PF3 0x0008
+#define PF4 0x0010
+#define PF5 0x0020
+#define PF6 0x0040
+#define PF7 0x0080
+#define PF8 0x0100
+#define PF9 0x0200
+#define PF10 0x0400
+#define PF11 0x0800
+#define PF12 0x1000
+#define PF13 0x2000
+#define PF14 0x4000
+#define PF15 0x8000
+
+/* General Purpose IO (0xFFC00700 - 0xFFC007FF) BIT POSITIONS */
+#define PF0_P 0
+#define PF1_P 1
+#define PF2_P 2
+#define PF3_P 3
+#define PF4_P 4
+#define PF5_P 5
+#define PF6_P 6
+#define PF7_P 7
+#define PF8_P 8
+#define PF9_P 9
+#define PF10_P 10
+#define PF11_P 11
+#define PF12_P 12
+#define PF13_P 13
+#define PF14_P 14
+#define PF15_P 15
+
+/* *********** SERIAL PERIPHERAL INTERFACE (SPI) MASKS **************** */
+
+/* SPI_CTL Masks */
+#define TIMOD 0x00000003 /* Transfer initiation mode and interrupt generation */
+#define SZ 0x00000004 /* Send Zero (=0) or last (=1) word when TDBR empty. */
+#define GM 0x00000008 /* When RDBR full, get more (=1) data or discard (=0) incoming Data */
+#define PSSE 0x00000010 /* Enable (=1) Slave-Select input for Master. */
+#define EMISO 0x00000020 /* Enable (=1) MISO pin as an output. */
+#define SIZE 0x00000100 /* Word length (0 => 8 bits, 1 => 16 bits) */
+#define LSBF 0x00000200 /* Data format (0 => MSB sent/received first 1 => LSB sent/received first) */
+#define CPHA 0x00000400 /* Clock phase (0 => SPICLK starts toggling in middle of xfer, 1 => SPICLK toggles at the beginning of xfer. */
+#define CPOL 0x00000800 /* Clock polarity (0 => active-high, 1 => active-low) */
+#define MSTR 0x00001000 /* Configures SPI as master (=1) or slave (=0) */
+#define WOM 0x00002000 /* Open drain (=1) data output enable (for MOSI and MISO) */
+#define SPE 0x00004000 /* SPI module enable (=1), disable (=0) */
+
+/* SPI_FLG Masks */
+#define FLS1 0x00000002 /* Enables (=1) SPI_FLOUT1 as flag output for SPI Slave-select */
+#define FLS2 0x00000004 /* Enables (=1) SPI_FLOUT2 as flag output for SPI Slave-select */
+#define FLS3 0x00000008 /* Enables (=1) SPI_FLOUT3 as flag output for SPI Slave-select */
+#define FLS4 0x00000010 /* Enables (=1) SPI_FLOUT4 as flag output for SPI Slave-select */
+#define FLS5 0x00000020 /* Enables (=1) SPI_FLOUT5 as flag output for SPI Slave-select */
+#define FLS6 0x00000040 /* Enables (=1) SPI_FLOUT6 as flag output for SPI Slave-select */
+#define FLS7 0x00000080 /* Enables (=1) SPI_FLOUT7 as flag output for SPI Slave-select */
+#define FLG1 0x00000200 /* Activates (=0) SPI_FLOUT1 as flag output for SPI Slave-select */
+#define FLG2 0x00000400 /* Activates (=0) SPI_FLOUT2 as flag output for SPI Slave-select */
+#define FLG3 0x00000800 /* Activates (=0) SPI_FLOUT3 as flag output for SPI Slave-select */
+#define FLG4 0x00001000 /* Activates (=0) SPI_FLOUT4 as flag output for SPI Slave-select */
+#define FLG5 0x00002000 /* Activates (=0) SPI_FLOUT5 as flag output for SPI Slave-select */
+#define FLG6 0x00004000 /* Activates (=0) SPI_FLOUT6 as flag output for SPI Slave-select */
+#define FLG7 0x00008000 /* Activates (=0) SPI_FLOUT7 as flag output for SPI Slave-select */
+
+/* SPI_FLG Bit Positions */
+#define FLS1_P 0x00000001 /* Enables (=1) SPI_FLOUT1 as flag output for SPI Slave-select */
+#define FLS2_P 0x00000002 /* Enables (=1) SPI_FLOUT2 as flag output for SPI Slave-select */
+#define FLS3_P 0x00000003 /* Enables (=1) SPI_FLOUT3 as flag output for SPI Slave-select */
+#define FLS4_P 0x00000004 /* Enables (=1) SPI_FLOUT4 as flag output for SPI Slave-select */
+#define FLS5_P 0x00000005 /* Enables (=1) SPI_FLOUT5 as flag output for SPI Slave-select */
+#define FLS6_P 0x00000006 /* Enables (=1) SPI_FLOUT6 as flag output for SPI Slave-select */
+#define FLS7_P 0x00000007 /* Enables (=1) SPI_FLOUT7 as flag output for SPI Slave-select */
+#define FLG1_P 0x00000009 /* Activates (=0) SPI_FLOUT1 as flag output for SPI Slave-select */
+#define FLG2_P 0x0000000A /* Activates (=0) SPI_FLOUT2 as flag output for SPI Slave-select */
+#define FLG3_P 0x0000000B /* Activates (=0) SPI_FLOUT3 as flag output for SPI Slave-select */
+#define FLG4_P 0x0000000C /* Activates (=0) SPI_FLOUT4 as flag output for SPI Slave-select */
+#define FLG5_P 0x0000000D /* Activates (=0) SPI_FLOUT5 as flag output for SPI Slave-select */
+#define FLG6_P 0x0000000E /* Activates (=0) SPI_FLOUT6 as flag output for SPI Slave-select */
+#define FLG7_P 0x0000000F /* Activates (=0) SPI_FLOUT7 as flag output for SPI Slave-select */
+
+/* SPI_STAT Masks */
+#define SPIF 0x00000001 /* Set (=1) when SPI single-word transfer complete */
+#define MODF 0x00000002 /* Set (=1) in a master device when some other device tries to become master */
+#define TXE 0x00000004 /* Set (=1) when transmission occurs with no new data in SPI_TDBR */
+#define TXS 0x00000008 /* SPI_TDBR Data Buffer Status (0=Empty, 1=Full) */
+#define RBSY 0x00000010 /* Set (=1) when data is received with RDBR full */
+#define RXS 0x00000020 /* SPI_RDBR Data Buffer Status (0=Empty, 1=Full) */
+#define TXCOL 0x00000040 /* When set (=1), corrupt data may have been transmitted */
+
+/* ********************* ASYNCHRONOUS MEMORY CONTROLLER MASKS ************* */
+
+/* AMGCTL Masks */
+#define AMCKEN 0x0001 /* Enable CLKOUT */
+#define AMBEN_B0 0x0002 /* Enable Asynchronous Memory Bank 0 only */
+#define AMBEN_B0_B1 0x0004 /* Enable Asynchronous Memory Banks 0 & 1 only */
+#define AMBEN_B0_B1_B2 0x0006 /* Enable Asynchronous Memory Banks 0, 1, and 2 */
+#define AMBEN_ALL 0x0008 /* Enable Asynchronous Memory Banks (all) 0, 1, 2, and 3 */
+#define B0_PEN 0x0010 /* Enable 16-bit packing Bank 0 */
+#define B1_PEN 0x0020 /* Enable 16-bit packing Bank 1 */
+#define B2_PEN 0x0040 /* Enable 16-bit packing Bank 2 */
+#define B3_PEN 0x0080 /* Enable 16-bit packing Bank 3 */
+
+/* AMGCTL Bit Positions */
+#define AMCKEN_P 0x00000000 /* Enable CLKOUT */
+#define AMBEN_P0 0x00000001 /* Asynchronous Memory Enable, 000 - banks 0-3 disabled, 001 - Bank 0 enabled */
+#define AMBEN_P1 0x00000002 /* Asynchronous Memory Enable, 010 - banks 0&1 enabled, 011 - banks 0-3 enabled */
+#define AMBEN_P2 0x00000003 /* Asynchronous Memory Enable, 1xx - All banks (bank 0, 1, 2, and 3) enabled */
+#define B0_PEN_P 0x004 /* Enable 16-bit packing Bank 0 */
+#define B1_PEN_P 0x005 /* Enable 16-bit packing Bank 1 */
+#define B2_PEN_P 0x006 /* Enable 16-bit packing Bank 2 */
+#define B3_PEN_P 0x007 /* Enable 16-bit packing Bank 3 */
+
+/* AMBCTL0 Masks */
+#define B0RDYEN 0x00000001 /* Bank 0 RDY Enable, 0=disable, 1=enable */
+#define B0RDYPOL 0x00000002 /* Bank 0 RDY Active high, 0=active low, 1=active high */
+#define B0TT_1 0x00000004 /* Bank 0 Transition Time from Read to Write = 1 cycle */
+#define B0TT_2 0x00000008 /* Bank 0 Transition Time from Read to Write = 2 cycles */
+#define B0TT_3 0x0000000C /* Bank 0 Transition Time from Read to Write = 3 cycles */
+#define B0TT_4 0x00000000 /* Bank 0 Transition Time from Read to Write = 4 cycles */
+#define B0ST_1 0x00000010 /* Bank 0 Setup Time from AOE asserted to Read/Write asserted=1 cycle */
+#define B0ST_2 0x00000020 /* Bank 0 Setup Time from AOE asserted to Read/Write asserted=2 cycles */
+#define B0ST_3 0x00000030 /* Bank 0 Setup Time from AOE asserted to Read/Write asserted=3 cycles */
+#define B0ST_4 0x00000000 /* Bank 0 Setup Time from AOE asserted to Read/Write asserted=4 cycles */
+#define B0HT_1 0x00000040 /* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 1 cycle */
+#define B0HT_2 0x00000080 /* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 2 cycles */
+#define B0HT_3 0x000000C0 /* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 3 cycles */
+#define B0HT_0 0x00000000 /* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 0 cycles */
+#define B0RAT_1 0x00000100 /* Bank 0 Read Access Time = 1 cycle */
+#define B0RAT_2 0x00000200 /* Bank 0 Read Access Time = 2 cycles */
+#define B0RAT_3 0x00000300 /* Bank 0 Read Access Time = 3 cycles */
+#define B0RAT_4 0x00000400 /* Bank 0 Read Access Time = 4 cycles */
+#define B0RAT_5 0x00000500 /* Bank 0 Read Access Time = 5 cycles */
+#define B0RAT_6 0x00000600 /* Bank 0 Read Access Time = 6 cycles */
+#define B0RAT_7 0x00000700 /* Bank 0 Read Access Time = 7 cycles */
+#define B0RAT_8 0x00000800 /* Bank 0 Read Access Time = 8 cycles */
+#define B0RAT_9 0x00000900 /* Bank 0 Read Access Time = 9 cycles */
+#define B0RAT_10 0x00000A00 /* Bank 0 Read Access Time = 10 cycles */
+#define B0RAT_11 0x00000B00 /* Bank 0 Read Access Time = 11 cycles */
+#define B0RAT_12 0x00000C00 /* Bank 0 Read Access Time = 12 cycles */
+#define B0RAT_13 0x00000D00 /* Bank 0 Read Access Time = 13 cycles */
+#define B0RAT_14 0x00000E00 /* Bank 0 Read Access Time = 14 cycles */
+#define B0RAT_15 0x00000F00 /* Bank 0 Read Access Time = 15 cycles */
+#define B0WAT_1 0x00001000 /* Bank 0 Write Access Time = 1 cycle */
+#define B0WAT_2 0x00002000 /* Bank 0 Write Access Time = 2 cycles */
+#define B0WAT_3 0x00003000 /* Bank 0 Write Access Time = 3 cycles */
+#define B0WAT_4 0x00004000 /* Bank 0 Write Access Time = 4 cycles */
+#define B0WAT_5 0x00005000 /* Bank 0 Write Access Time = 5 cycles */
+#define B0WAT_6 0x00006000 /* Bank 0 Write Access Time = 6 cycles */
+#define B0WAT_7 0x00007000 /* Bank 0 Write Access Time = 7 cycles */
+#define B0WAT_8 0x00008000 /* Bank 0 Write Access Time = 8 cycles */
+#define B0WAT_9 0x00009000 /* Bank 0 Write Access Time = 9 cycles */
+#define B0WAT_10 0x0000A000 /* Bank 0 Write Access Time = 10 cycles */
+#define B0WAT_11 0x0000B000 /* Bank 0 Write Access Time = 11 cycles */
+#define B0WAT_12 0x0000C000 /* Bank 0 Write Access Time = 12 cycles */
+#define B0WAT_13 0x0000D000 /* Bank 0 Write Access Time = 13 cycles */
+#define B0WAT_14 0x0000E000 /* Bank 0 Write Access Time = 14 cycles */
+#define B0WAT_15 0x0000F000 /* Bank 0 Write Access Time = 15 cycles */
+#define B1RDYEN 0x00010000 /* Bank 1 RDY enable, 0=disable, 1=enable */
+#define B1RDYPOL 0x00020000 /* Bank 1 RDY Active high, 0=active low, 1=active high */
+#define B1TT_1 0x00040000 /* Bank 1 Transition Time from Read to Write = 1 cycle */
+#define B1TT_2 0x00080000 /* Bank 1 Transition Time from Read to Write = 2 cycles */
+#define B1TT_3 0x000C0000 /* Bank 1 Transition Time from Read to Write = 3 cycles */
+#define B1TT_4 0x00000000 /* Bank 1 Transition Time from Read to Write = 4 cycles */
+#define B1ST_1 0x00100000 /* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 1 cycle */
+#define B1ST_2 0x00200000 /* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 2 cycles */
+#define B1ST_3 0x00300000 /* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 3 cycles */
+#define B1ST_4 0x00000000 /* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 4 cycles */
+#define B1HT_1 0x00400000 /* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 1 cycle */
+#define B1HT_2 0x00800000 /* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 2 cycles */
+#define B1HT_3 0x00C00000 /* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 3 cycles */
+#define B1HT_0 0x00000000 /* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 0 cycles */
+#define B1RAT_1 0x01000000 /* Bank 1 Read Access Time = 1 cycle */
+#define B1RAT_2 0x02000000 /* Bank 1 Read Access Time = 2 cycles */
+#define B1RAT_3 0x03000000 /* Bank 1 Read Access Time = 3 cycles */
+#define B1RAT_4 0x04000000 /* Bank 1 Read Access Time = 4 cycles */
+#define B1RAT_5 0x05000000 /* Bank 1 Read Access Time = 5 cycles */
+#define B1RAT_6 0x06000000 /* Bank 1 Read Access Time = 6 cycles */
+#define B1RAT_7 0x07000000 /* Bank 1 Read Access Time = 7 cycles */
+#define B1RAT_8 0x08000000 /* Bank 1 Read Access Time = 8 cycles */
+#define B1RAT_9 0x09000000 /* Bank 1 Read Access Time = 9 cycles */
+#define B1RAT_10 0x0A000000 /* Bank 1 Read Access Time = 10 cycles */
+#define B1RAT_11 0x0B000000 /* Bank 1 Read Access Time = 11 cycles */
+#define B1RAT_12 0x0C000000 /* Bank 1 Read Access Time = 12 cycles */
+#define B1RAT_13 0x0D000000 /* Bank 1 Read Access Time = 13 cycles */
+#define B1RAT_14 0x0E000000 /* Bank 1 Read Access Time = 14 cycles */
+#define B1RAT_15 0x0F000000 /* Bank 1 Read Access Time = 15 cycles */
+#define B1WAT_1 0x10000000 /* Bank 1 Write Access Time = 1 cycle */
+#define B1WAT_2 0x20000000 /* Bank 1 Write Access Time = 2 cycles */
+#define B1WAT_3 0x30000000 /* Bank 1 Write Access Time = 3 cycles */
+#define B1WAT_4 0x40000000 /* Bank 1 Write Access Time = 4 cycles */
+#define B1WAT_5 0x50000000 /* Bank 1 Write Access Time = 5 cycles */
+#define B1WAT_6 0x60000000 /* Bank 1 Write Access Time = 6 cycles */
+#define B1WAT_7 0x70000000 /* Bank 1 Write Access Time = 7 cycles */
+#define B1WAT_8 0x80000000 /* Bank 1 Write Access Time = 8 cycles */
+#define B1WAT_9 0x90000000 /* Bank 1 Write Access Time = 9 cycles */
+#define B1WAT_10 0xA0000000 /* Bank 1 Write Access Time = 10 cycles */
+#define B1WAT_11 0xB0000000 /* Bank 1 Write Access Time = 11 cycles */
+#define B1WAT_12 0xC0000000 /* Bank 1 Write Access Time = 12 cycles */
+#define B1WAT_13 0xD0000000 /* Bank 1 Write Access Time = 13 cycles */
+#define B1WAT_14 0xE0000000 /* Bank 1 Write Access Time = 14 cycles */
+#define B1WAT_15 0xF0000000 /* Bank 1 Write Access Time = 15 cycles */
+
+/* AMBCTL1 Masks */
+#define B2RDYEN 0x00000001 /* Bank 2 RDY Enable, 0=disable, 1=enable */
+#define B2RDYPOL 0x00000002 /* Bank 2 RDY Active high, 0=active low, 1=active high */
+#define B2TT_1 0x00000004 /* Bank 2 Transition Time from Read to Write = 1 cycle */
+#define B2TT_2 0x00000008 /* Bank 2 Transition Time from Read to Write = 2 cycles */
+#define B2TT_3 0x0000000C /* Bank 2 Transition Time from Read to Write = 3 cycles */
+#define B2TT_4 0x00000000 /* Bank 2 Transition Time from Read to Write = 4 cycles */
+#define B2ST_1 0x00000010 /* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 1 cycle */
+#define B2ST_2 0x00000020 /* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 2 cycles */
+#define B2ST_3 0x00000030 /* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 3 cycles */
+#define B2ST_4 0x00000000 /* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 4 cycles */
+#define B2HT_1 0x00000040 /* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 1 cycle */
+#define B2HT_2 0x00000080 /* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 2 cycles */
+#define B2HT_3 0x000000C0 /* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 3 cycles */
+#define B2HT_0 0x00000000 /* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 0 cycles */
+#define B2RAT_1 0x00000100 /* Bank 2 Read Access Time = 1 cycle */
+#define B2RAT_2 0x00000200 /* Bank 2 Read Access Time = 2 cycles */
+#define B2RAT_3 0x00000300 /* Bank 2 Read Access Time = 3 cycles */
+#define B2RAT_4 0x00000400 /* Bank 2 Read Access Time = 4 cycles */
+#define B2RAT_5 0x00000500 /* Bank 2 Read Access Time = 5 cycles */
+#define B2RAT_6 0x00000600 /* Bank 2 Read Access Time = 6 cycles */
+#define B2RAT_7 0x00000700 /* Bank 2 Read Access Time = 7 cycles */
+#define B2RAT_8 0x00000800 /* Bank 2 Read Access Time = 8 cycles */
+#define B2RAT_9 0x00000900 /* Bank 2 Read Access Time = 9 cycles */
+#define B2RAT_10 0x00000A00 /* Bank 2 Read Access Time = 10 cycles */
+#define B2RAT_11 0x00000B00 /* Bank 2 Read Access Time = 11 cycles */
+#define B2RAT_12 0x00000C00 /* Bank 2 Read Access Time = 12 cycles */
+#define B2RAT_13 0x00000D00 /* Bank 2 Read Access Time = 13 cycles */
+#define B2RAT_14 0x00000E00 /* Bank 2 Read Access Time = 14 cycles */
+#define B2RAT_15 0x00000F00 /* Bank 2 Read Access Time = 15 cycles */
+#define B2WAT_1 0x00001000 /* Bank 2 Write Access Time = 1 cycle */
+#define B2WAT_2 0x00002000 /* Bank 2 Write Access Time = 2 cycles */
+#define B2WAT_3 0x00003000 /* Bank 2 Write Access Time = 3 cycles */
+#define B2WAT_4 0x00004000 /* Bank 2 Write Access Time = 4 cycles */
+#define B2WAT_5 0x00005000 /* Bank 2 Write Access Time = 5 cycles */
+#define B2WAT_6 0x00006000 /* Bank 2 Write Access Time = 6 cycles */
+#define B2WAT_7 0x00007000 /* Bank 2 Write Access Time = 7 cycles */
+#define B2WAT_8 0x00008000 /* Bank 2 Write Access Time = 8 cycles */
+#define B2WAT_9 0x00009000 /* Bank 2 Write Access Time = 9 cycles */
+#define B2WAT_10 0x0000A000 /* Bank 2 Write Access Time = 10 cycles */
+#define B2WAT_11 0x0000B000 /* Bank 2 Write Access Time = 11 cycles */
+#define B2WAT_12 0x0000C000 /* Bank 2 Write Access Time = 12 cycles */
+#define B2WAT_13 0x0000D000 /* Bank 2 Write Access Time = 13 cycles */
+#define B2WAT_14 0x0000E000 /* Bank 2 Write Access Time = 14 cycles */
+#define B2WAT_15 0x0000F000 /* Bank 2 Write Access Time = 15 cycles */
+#define B3RDYEN 0x00010000 /* Bank 3 RDY enable, 0=disable, 1=enable */
+#define B3RDYPOL 0x00020000 /* Bank 3 RDY Active high, 0=active low, 1=active high */
+#define B3TT_1 0x00040000 /* Bank 3 Transition Time from Read to Write = 1 cycle */
+#define B3TT_2 0x00080000 /* Bank 3 Transition Time from Read to Write = 2 cycles */
+#define B3TT_3 0x000C0000 /* Bank 3 Transition Time from Read to Write = 3 cycles */
+#define B3TT_4 0x00000000 /* Bank 3 Transition Time from Read to Write = 4 cycles */
+#define B3ST_1 0x00100000 /* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 1 cycle */
+#define B3ST_2 0x00200000 /* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 2 cycles */
+#define B3ST_3 0x00300000 /* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 3 cycles */
+#define B3ST_4 0x00000000 /* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 4 cycles */
+#define B3HT_1 0x00400000 /* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 1 cycle */
+#define B3HT_2 0x00800000 /* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 2 cycles */
+#define B3HT_3 0x00C00000 /* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 3 cycles */
+#define B3HT_0 0x00000000 /* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 0 cycles */
+#define B3RAT_1 0x01000000 /* Bank 3 Read Access Time = 1 cycle */
+#define B3RAT_2 0x02000000 /* Bank 3 Read Access Time = 2 cycles */
+#define B3RAT_3 0x03000000 /* Bank 3 Read Access Time = 3 cycles */
+#define B3RAT_4 0x04000000 /* Bank 3 Read Access Time = 4 cycles */
+#define B3RAT_5 0x05000000 /* Bank 3 Read Access Time = 5 cycles */
+#define B3RAT_6 0x06000000 /* Bank 3 Read Access Time = 6 cycles */
+#define B3RAT_7 0x07000000 /* Bank 3 Read Access Time = 7 cycles */
+#define B3RAT_8 0x08000000 /* Bank 3 Read Access Time = 8 cycles */
+#define B3RAT_9 0x09000000 /* Bank 3 Read Access Time = 9 cycles */
+#define B3RAT_10 0x0A000000 /* Bank 3 Read Access Time = 10 cycles */
+#define B3RAT_11 0x0B000000 /* Bank 3 Read Access Time = 11 cycles */
+#define B3RAT_12 0x0C000000 /* Bank 3 Read Access Time = 12 cycles */
+#define B3RAT_13 0x0D000000 /* Bank 3 Read Access Time = 13 cycles */
+#define B3RAT_14 0x0E000000 /* Bank 3 Read Access Time = 14 cycles */
+#define B3RAT_15 0x0F000000 /* Bank 3 Read Access Time = 15 cycles */
+#define B3WAT_1 0x10000000 /* Bank 3 Write Access Time = 1 cycle */
+#define B3WAT_2 0x20000000 /* Bank 3 Write Access Time = 2 cycles */
+#define B3WAT_3 0x30000000 /* Bank 3 Write Access Time = 3 cycles */
+#define B3WAT_4 0x40000000 /* Bank 3 Write Access Time = 4 cycles */
+#define B3WAT_5 0x50000000 /* Bank 3 Write Access Time = 5 cycles */
+#define B3WAT_6 0x60000000 /* Bank 3 Write Access Time = 6 cycles */
+#define B3WAT_7 0x70000000 /* Bank 3 Write Access Time = 7 cycles */
+#define B3WAT_8 0x80000000 /* Bank 3 Write Access Time = 8 cycles */
+#define B3WAT_9 0x90000000 /* Bank 3 Write Access Time = 9 cycles */
+#define B3WAT_10 0xA0000000 /* Bank 3 Write Access Time = 10 cycles */
+#define B3WAT_11 0xB0000000 /* Bank 3 Write Access Time = 11 cycles */
+#define B3WAT_12 0xC0000000 /* Bank 3 Write Access Time = 12 cycles */
+#define B3WAT_13 0xD0000000 /* Bank 3 Write Access Time = 13 cycles */
+#define B3WAT_14 0xE0000000 /* Bank 3 Write Access Time = 14 cycles */
+#define B3WAT_15 0xF0000000 /* Bank 3 Write Access Time = 15 cycles */
+
+/* ********************** SDRAM CONTROLLER MASKS *************************** */
+
+/* EBIU_SDGCTL Masks */
+#define SCTLE 0x00000001 /* Enable SCLK[0], /SRAS, /SCAS, /SWE, SDQM[3:0] */
+#define CL_2 0x00000008 /* SDRAM CAS latency = 2 cycles */
+#define CL_3 0x0000000C /* SDRAM CAS latency = 3 cycles */
+#define PFE 0x00000010 /* Enable SDRAM prefetch */
+#define PFP 0x00000020 /* Prefetch has priority over AMC requests */
+#define TRAS_1 0x00000040 /* SDRAM tRAS = 1 cycle */
+#define TRAS_2 0x00000080 /* SDRAM tRAS = 2 cycles */
+#define TRAS_3 0x000000C0 /* SDRAM tRAS = 3 cycles */
+#define TRAS_4 0x00000100 /* SDRAM tRAS = 4 cycles */
+#define TRAS_5 0x00000140 /* SDRAM tRAS = 5 cycles */
+#define TRAS_6 0x00000180 /* SDRAM tRAS = 6 cycles */
+#define TRAS_7 0x000001C0 /* SDRAM tRAS = 7 cycles */
+#define TRAS_8 0x00000200 /* SDRAM tRAS = 8 cycles */
+#define TRAS_9 0x00000240 /* SDRAM tRAS = 9 cycles */
+#define TRAS_10 0x00000280 /* SDRAM tRAS = 10 cycles */
+#define TRAS_11 0x000002C0 /* SDRAM tRAS = 11 cycles */
+#define TRAS_12 0x00000300 /* SDRAM tRAS = 12 cycles */
+#define TRAS_13 0x00000340 /* SDRAM tRAS = 13 cycles */
+#define TRAS_14 0x00000380 /* SDRAM tRAS = 14 cycles */
+#define TRAS_15 0x000003C0 /* SDRAM tRAS = 15 cycles */
+#define TRP_1 0x00000800 /* SDRAM tRP = 1 cycle */
+#define TRP_2 0x00001000 /* SDRAM tRP = 2 cycles */
+#define TRP_3 0x00001800 /* SDRAM tRP = 3 cycles */
+#define TRP_4 0x00002000 /* SDRAM tRP = 4 cycles */
+#define TRP_5 0x00002800 /* SDRAM tRP = 5 cycles */
+#define TRP_6 0x00003000 /* SDRAM tRP = 6 cycles */
+#define TRP_7 0x00003800 /* SDRAM tRP = 7 cycles */
+#define TRCD_1 0x00008000 /* SDRAM tRCD = 1 cycle */
+#define TRCD_2 0x00010000 /* SDRAM tRCD = 2 cycles */
+#define TRCD_3 0x00018000 /* SDRAM tRCD = 3 cycles */
+#define TRCD_4 0x00020000 /* SDRAM tRCD = 4 cycles */
+#define TRCD_5 0x00028000 /* SDRAM tRCD = 5 cycles */
+#define TRCD_6 0x00030000 /* SDRAM tRCD = 6 cycles */
+#define TRCD_7 0x00038000 /* SDRAM tRCD = 7 cycles */
+#define TWR_1 0x00080000 /* SDRAM tWR = 1 cycle */
+#define TWR_2 0x00100000 /* SDRAM tWR = 2 cycles */
+#define TWR_3 0x00180000 /* SDRAM tWR = 3 cycles */
+#define PUPSD 0x00200000 /*Power-up start delay */
+#define PSM 0x00400000 /* SDRAM power-up sequence = Precharge, mode register set, 8 CBR refresh cycles */
+#define PSS 0x00800000 /* enable SDRAM power-up sequence on next SDRAM access */
+#define SRFS 0x01000000 /* Start SDRAM self-refresh mode */
+#define EBUFE 0x02000000 /* Enable external buffering timing */
+#define FBBRW 0x04000000 /* Fast back-to-back read write enable */
+#define EMREN 0x10000000 /* Extended mode register enable */
+#define TCSR 0x20000000 /* Temp compensated self refresh value 85 deg C */
+#define CDDBG 0x40000000 /* Tristate SDRAM controls during bus grant */
+
+/* EBIU_SDBCTL Masks */
+#define EB0_E 0x00000001 /* Enable SDRAM external bank 0 */
+#define EB0_SZ_16 0x00000000 /* SDRAM external bank size = 16MB */
+#define EB0_SZ_32 0x00000002 /* SDRAM external bank size = 32MB */
+#define EB0_SZ_64 0x00000004 /* SDRAM external bank size = 64MB */
+#define EB0_SZ_128 0x00000006 /* SDRAM external bank size = 128MB */
+#define EB0_CAW_8 0x00000000 /* SDRAM external bank column address width = 8 bits */
+#define EB0_CAW_9 0x00000010 /* SDRAM external bank column address width = 9 bits */
+#define EB0_CAW_10 0x00000020 /* SDRAM external bank column address width = 9 bits */
+#define EB0_CAW_11 0x00000030 /* SDRAM external bank column address width = 9 bits */
+
+#define EB1_E 0x00000100 /* Enable SDRAM external bank 1 */
+#define EB1__SZ_16 0x00000000 /* SDRAM external bank size = 16MB */
+#define EB1__SZ_32 0x00000200 /* SDRAM external bank size = 32MB */
+#define EB1__SZ_64 0x00000400 /* SDRAM external bank size = 64MB */
+#define EB1__SZ_128 0x00000600 /* SDRAM external bank size = 128MB */
+#define EB1__CAW_8 0x00000000 /* SDRAM external bank column address width = 8 bits */
+#define EB1__CAW_9 0x00001000 /* SDRAM external bank column address width = 9 bits */
+#define EB1__CAW_10 0x00002000 /* SDRAM external bank column address width = 9 bits */
+#define EB1__CAW_11 0x00003000 /* SDRAM external bank column address width = 9 bits */
+
+#define EB2__E 0x00010000 /* Enable SDRAM external bank 2 */
+#define EB2__SZ_16 0x00000000 /* SDRAM external bank size = 16MB */
+#define EB2__SZ_32 0x00020000 /* SDRAM external bank size = 32MB */
+#define EB2__SZ_64 0x00040000 /* SDRAM external bank size = 64MB */
+#define EB2__SZ_128 0x00060000 /* SDRAM external bank size = 128MB */
+#define EB2__CAW_8 0x00000000 /* SDRAM external bank column address width = 8 bits */
+#define EB2__CAW_9 0x00100000 /* SDRAM external bank column address width = 9 bits */
+#define EB2__CAW_10 0x00200000 /* SDRAM external bank column address width = 9 bits */
+#define EB2__CAW_11 0x00300000 /* SDRAM external bank column address width = 9 bits */
+
+#define EB3__E 0x01000000 /* Enable SDRAM external bank 3 */
+#define EB3__SZ_16 0x00000000 /* SDRAM external bank size = 16MB */
+#define EB3__SZ_32 0x02000000 /* SDRAM external bank size = 32MB */
+#define EB3__SZ_64 0x04000000 /* SDRAM external bank size = 64MB */
+#define EB3__SZ_128 0x06000000 /* SDRAM external bank size = 128MB */
+#define EB3__CAW_8 0x00000000 /* SDRAM external bank column address width = 8 bits */
+#define EB3__CAW_9 0x10000000 /* SDRAM external bank column address width = 9 bits */
+#define EB3__CAW_10 0x20000000 /* SDRAM external bank column address width = 9 bits */
+#define EB3__CAW_11 0x30000000 /* SDRAM external bank column address width = 9 bits */
+
+/* EBIU_SDSTAT Masks */
+#define SDCI 0x00000001 /* SDRAM controller is idle */
+#define SDSRA 0x00000002 /* SDRAM SDRAM self refresh is active */
+#define SDPUA 0x00000004 /* SDRAM power up active */
+#define SDRS 0x00000008 /* SDRAM is in reset state */
+#define SDEASE 0x00000010 /* SDRAM EAB sticky error status - W1C */
+#define BGSTAT 0x00000020 /* Bus granted */
+
+/*VR_CTL Masks*/
+#define WAKE 0x100
+#define VLEV_6 0x60
+#define VLEV_7 0x70
+#define VLEV_8 0x80
+#define VLEV_9 0x90
+#define VLEV_10 0xA0
+#define VLEV_11 0xB0
+#define VLEV_12 0xC0
+#define VLEV_13 0xD0
+#define VLEV_14 0xE0
+#define VLEV_15 0xF0
+#define FREQ_3 0x03
+
+#endif /* _DEF_BF561_H */
diff --git a/include/asm-blackfin/mach-bf561/dma.h b/include/asm-blackfin/mach-bf561/dma.h
new file mode 100644
index 0000000..21d9820
--- /dev/null
+++ b/include/asm-blackfin/mach-bf561/dma.h
@@ -0,0 +1,35 @@
+/*****************************************************************************
+*
+* BF-533/2/1 Specific Declarations
+*
+****************************************************************************/
+
+#ifndef _MACH_DMA_H_
+#define _MACH_DMA_H_
+
+#define MAX_BLACKFIN_DMA_CHANNEL 36
+
+#define CH_PPI0 0
+#define CH_PPI (CH_PPI0)
+#define CH_PPI1 1
+#define CH_SPORT0_RX 12
+#define CH_SPORT0_TX 13
+#define CH_SPORT1_RX 14
+#define CH_SPORT1_TX 15
+#define CH_SPI 16
+#define CH_UART_RX 17
+#define CH_UART_TX 18
+#define CH_MEM_STREAM0_DEST 24 /* TX */
+#define CH_MEM_STREAM0_SRC 25 /* RX */
+#define CH_MEM_STREAM1_DEST 26 /* TX */
+#define CH_MEM_STREAM1_SRC 27 /* RX */
+#define CH_MEM_STREAM2_DEST 28
+#define CH_MEM_STREAM2_SRC 29
+#define CH_MEM_STREAM3_SRC 30
+#define CH_MEM_STREAM3_DEST 31
+#define CH_IMEM_STREAM0_DEST 32
+#define CH_IMEM_STREAM0_SRC 33
+#define CH_IMEM_STREAM1_SRC 34
+#define CH_IMEM_STREAM1_DEST 35
+
+#endif
diff --git a/include/asm-blackfin/mach-bf561/irq.h b/include/asm-blackfin/mach-bf561/irq.h
new file mode 100644
index 0000000..a753ce7
--- /dev/null
+++ b/include/asm-blackfin/mach-bf561/irq.h
@@ -0,0 +1,450 @@
+
+/*
+ * File: include/asm-blackfin/mach-bf561/irq.h
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Rev:
+ *
+ * Modified:
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.
+ * If not, write to the Free Software Foundation,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef _BF561_IRQ_H_
+#define _BF561_IRQ_H_
+
+/***********************************************************************
+ * Interrupt source definitions:
+ Event Source Core Event Name IRQ No
+ (highest priority)
+ Emulation Events EMU 0
+ Reset RST 1
+ NMI NMI 2
+ Exception EVX 3
+ Reserved -- 4
+ Hardware Error IVHW 5
+ Core Timer IVTMR 6 *
+
+ PLL Wakeup Interrupt IVG7 7
+ DMA1 Error (generic) IVG7 8
+ DMA2 Error (generic) IVG7 9
+ IMDMA Error (generic) IVG7 10
+ PPI1 Error Interrupt IVG7 11
+ PPI2 Error Interrupt IVG7 12
+ SPORT0 Error Interrupt IVG7 13
+ SPORT1 Error Interrupt IVG7 14
+ SPI Error Interrupt IVG7 15
+ UART Error Interrupt IVG7 16
+ Reserved Interrupt IVG7 17
+
+ DMA1 0 Interrupt(PPI1) IVG8 18
+ DMA1 1 Interrupt(PPI2) IVG8 19
+ DMA1 2 Interrupt IVG8 20
+ DMA1 3 Interrupt IVG8 21
+ DMA1 4 Interrupt IVG8 22
+ DMA1 5 Interrupt IVG8 23
+ DMA1 6 Interrupt IVG8 24
+ DMA1 7 Interrupt IVG8 25
+ DMA1 8 Interrupt IVG8 26
+ DMA1 9 Interrupt IVG8 27
+ DMA1 10 Interrupt IVG8 28
+ DMA1 11 Interrupt IVG8 29
+
+ DMA2 0 (SPORT0 RX) IVG9 30
+ DMA2 1 (SPORT0 TX) IVG9 31
+ DMA2 2 (SPORT1 RX) IVG9 32
+ DMA2 3 (SPORT2 TX) IVG9 33
+ DMA2 4 (SPI) IVG9 34
+ DMA2 5 (UART RX) IVG9 35
+ DMA2 6 (UART TX) IVG9 36
+ DMA2 7 Interrupt IVG9 37
+ DMA2 8 Interrupt IVG9 38
+ DMA2 9 Interrupt IVG9 39
+ DMA2 10 Interrupt IVG9 40
+ DMA2 11 Interrupt IVG9 41
+
+ TIMER 0 Interrupt IVG10 42
+ TIMER 1 Interrupt IVG10 43
+ TIMER 2 Interrupt IVG10 44
+ TIMER 3 Interrupt IVG10 45
+ TIMER 4 Interrupt IVG10 46
+ TIMER 5 Interrupt IVG10 47
+ TIMER 6 Interrupt IVG10 48
+ TIMER 7 Interrupt IVG10 49
+ TIMER 8 Interrupt IVG10 50
+ TIMER 9 Interrupt IVG10 51
+ TIMER 10 Interrupt IVG10 52
+ TIMER 11 Interrupt IVG10 53
+
+ Programmable Flags0 A (8) IVG11 54
+ Programmable Flags0 B (8) IVG11 55
+ Programmable Flags1 A (8) IVG11 56
+ Programmable Flags1 B (8) IVG11 57
+ Programmable Flags2 A (8) IVG11 58
+ Programmable Flags2 B (8) IVG11 59
+
+ MDMA1 0 write/read INT IVG8 60
+ MDMA1 1 write/read INT IVG8 61
+
+ MDMA2 0 write/read INT IVG9 62
+ MDMA2 1 write/read INT IVG9 63
+
+ IMDMA 0 write/read INT IVG12 64
+ IMDMA 1 write/read INT IVG12 65
+
+ Watch Dog Timer IVG13 66
+
+ Reserved interrupt IVG7 67
+ Reserved interrupt IVG7 68
+ Supplemental interrupt 0 IVG7 69
+ supplemental interrupt 1 IVG7 70
+
+ Software Interrupt 1 IVG14 71
+ Software Interrupt 2 IVG15 72 *
+ (lowest priority)
+ **********************************************************************/
+
+#define SYS_IRQS 72
+#define NR_PERI_INTS 64
+
+/*
+ * The ABSTRACT IRQ definitions
+ * the first seven of the following are fixed,
+ * the rest you change if you need to.
+ */
+/* IVG 0-6*/
+#define IRQ_EMU 0 /* Emulation */
+#define IRQ_RST 1 /* Reset */
+#define IRQ_NMI 2 /* Non Maskable Interrupt */
+#define IRQ_EVX 3 /* Exception */
+#define IRQ_UNUSED 4 /* Reserved interrupt */
+#define IRQ_HWERR 5 /* Hardware Error */
+#define IRQ_CORETMR 6 /* Core timer */
+
+#define IVG_BASE 7
+/* IVG 7 */
+#define IRQ_PLL_WAKEUP (IVG_BASE + 0) /* PLL Wakeup Interrupt */
+#define IRQ_DMA1_ERROR (IVG_BASE + 1) /* DMA1 Error (general) */
+#define IRQ_DMA_ERROR IRQ_DMA1_ERROR /* DMA1 Error (general) */
+#define IRQ_DMA2_ERROR (IVG_BASE + 2) /* DMA2 Error (general) */
+#define IRQ_IMDMA_ERROR (IVG_BASE + 3) /* IMDMA Error Interrupt */
+#define IRQ_PPI1_ERROR (IVG_BASE + 4) /* PPI1 Error Interrupt */
+#define IRQ_PPI_ERROR IRQ_PPI1_ERROR /* PPI1 Error Interrupt */
+#define IRQ_PPI2_ERROR (IVG_BASE + 5) /* PPI2 Error Interrupt */
+#define IRQ_SPORT0_ERROR (IVG_BASE + 6) /* SPORT0 Error Interrupt */
+#define IRQ_SPORT1_ERROR (IVG_BASE + 7) /* SPORT1 Error Interrupt */
+#define IRQ_SPI_ERROR (IVG_BASE + 8) /* SPI Error Interrupt */
+#define IRQ_UART_ERROR (IVG_BASE + 9) /* UART Error Interrupt */
+#define IRQ_RESERVED_ERROR (IVG_BASE + 10) /* Reversed Interrupt */
+/* IVG 8 */
+#define IRQ_DMA1_0 (IVG_BASE + 11) /* DMA1 0 Interrupt(PPI1) */
+#define IRQ_PPI IRQ_DMA1_0 /* DMA1 0 Interrupt(PPI1) */
+#define IRQ_PPI0 IRQ_DMA1_0 /* DMA1 0 Interrupt(PPI1) */
+#define IRQ_DMA1_1 (IVG_BASE + 12) /* DMA1 1 Interrupt(PPI2) */
+#define IRQ_PPI1 IRQ_DMA1_1 /* DMA1 1 Interrupt(PPI2) */
+#define IRQ_DMA1_2 (IVG_BASE + 13) /* DMA1 2 Interrupt */
+#define IRQ_DMA1_3 (IVG_BASE + 14) /* DMA1 3 Interrupt */
+#define IRQ_DMA1_4 (IVG_BASE + 15) /* DMA1 4 Interrupt */
+#define IRQ_DMA1_5 (IVG_BASE + 16) /* DMA1 5 Interrupt */
+#define IRQ_DMA1_6 (IVG_BASE + 17) /* DMA1 6 Interrupt */
+#define IRQ_DMA1_7 (IVG_BASE + 18) /* DMA1 7 Interrupt */
+#define IRQ_DMA1_8 (IVG_BASE + 19) /* DMA1 8 Interrupt */
+#define IRQ_DMA1_9 (IVG_BASE + 20) /* DMA1 9 Interrupt */
+#define IRQ_DMA1_10 (IVG_BASE + 21) /* DMA1 10 Interrupt */
+#define IRQ_DMA1_11 (IVG_BASE + 22) /* DMA1 11 Interrupt */
+/* IVG 9 */
+#define IRQ_DMA2_0 (IVG_BASE + 23) /* DMA2 0 (SPORT0 RX) */
+#define IRQ_SPORT0_RX IRQ_DMA2_0 /* DMA2 0 (SPORT0 RX) */
+#define IRQ_DMA2_1 (IVG_BASE + 24) /* DMA2 1 (SPORT0 TX) */
+#define IRQ_SPORT0_TX IRQ_DMA2_1 /* DMA2 1 (SPORT0 TX) */
+#define IRQ_DMA2_2 (IVG_BASE + 25) /* DMA2 2 (SPORT1 RX) */
+#define IRQ_SPORT1_RX IRQ_DMA2_2 /* DMA2 2 (SPORT1 RX) */
+#define IRQ_DMA2_3 (IVG_BASE + 26) /* DMA2 3 (SPORT2 TX) */
+#define IRQ_SPORT1_TX IRQ_DMA2_3 /* DMA2 3 (SPORT2 TX) */
+#define IRQ_DMA2_4 (IVG_BASE + 27) /* DMA2 4 (SPI) */
+#define IRQ_SPI IRQ_DMA2_4 /* DMA2 4 (SPI) */
+#define IRQ_DMA2_5 (IVG_BASE + 28) /* DMA2 5 (UART RX) */
+#define IRQ_UART_RX IRQ_DMA2_5 /* DMA2 5 (UART RX) */
+#define IRQ_DMA2_6 (IVG_BASE + 29) /* DMA2 6 (UART TX) */
+#define IRQ_UART_TX IRQ_DMA2_6 /* DMA2 6 (UART TX) */
+#define IRQ_DMA2_7 (IVG_BASE + 30) /* DMA2 7 Interrupt */
+#define IRQ_DMA2_8 (IVG_BASE + 31) /* DMA2 8 Interrupt */
+#define IRQ_DMA2_9 (IVG_BASE + 32) /* DMA2 9 Interrupt */
+#define IRQ_DMA2_10 (IVG_BASE + 33) /* DMA2 10 Interrupt */
+#define IRQ_DMA2_11 (IVG_BASE + 34) /* DMA2 11 Interrupt */
+/* IVG 10 */
+#define IRQ_TIMER0 (IVG_BASE + 35) /* TIMER 0 Interrupt */
+#define IRQ_TIMER1 (IVG_BASE + 36) /* TIMER 1 Interrupt */
+#define IRQ_TIMER2 (IVG_BASE + 37) /* TIMER 2 Interrupt */
+#define IRQ_TIMER3 (IVG_BASE + 38) /* TIMER 3 Interrupt */
+#define IRQ_TIMER4 (IVG_BASE + 39) /* TIMER 4 Interrupt */
+#define IRQ_TIMER5 (IVG_BASE + 40) /* TIMER 5 Interrupt */
+#define IRQ_TIMER6 (IVG_BASE + 41) /* TIMER 6 Interrupt */
+#define IRQ_TIMER7 (IVG_BASE + 42) /* TIMER 7 Interrupt */
+#define IRQ_TIMER8 (IVG_BASE + 43) /* TIMER 8 Interrupt */
+#define IRQ_TIMER9 (IVG_BASE + 44) /* TIMER 9 Interrupt */
+#define IRQ_TIMER10 (IVG_BASE + 45) /* TIMER 10 Interrupt */
+#define IRQ_TIMER11 (IVG_BASE + 46) /* TIMER 11 Interrupt */
+/* IVG 11 */
+#define IRQ_PROG0_INTA (IVG_BASE + 47) /* Programmable Flags0 A (8) */
+#define IRQ_PROG_INTA IRQ_PROG0_INTA /* Programmable Flags0 A (8) */
+#define IRQ_PROG0_INTB (IVG_BASE + 48) /* Programmable Flags0 B (8) */
+#define IRQ_PROG_INTB IRQ_PROG0_INTB /* Programmable Flags0 B (8) */
+#define IRQ_PROG1_INTA (IVG_BASE + 49) /* Programmable Flags1 A (8) */
+#define IRQ_PROG1_INTB (IVG_BASE + 50) /* Programmable Flags1 B (8) */
+#define IRQ_PROG2_INTA (IVG_BASE + 51) /* Programmable Flags2 A (8) */
+#define IRQ_PROG2_INTB (IVG_BASE + 52) /* Programmable Flags2 B (8) */
+/* IVG 8 */
+#define IRQ_DMA1_WRRD0 (IVG_BASE + 53) /* MDMA1 0 write/read INT */
+#define IRQ_DMA_WRRD0 IRQ_DMA1_WRRD0 /* MDMA1 0 write/read INT */
+#define IRQ_MEM_DMA0 IRQ_DMA1_WRRD0
+#define IRQ_DMA1_WRRD1 (IVG_BASE + 54) /* MDMA1 1 write/read INT */
+#define IRQ_DMA_WRRD1 IRQ_DMA1_WRRD1 /* MDMA1 1 write/read INT */
+#define IRQ_MEM_DMA1 IRQ_DMA1_WRRD1
+/* IVG 9 */
+#define IRQ_DMA2_WRRD0 (IVG_BASE + 55) /* MDMA2 0 write/read INT */
+#define IRQ_MEM_DMA2 IRQ_DMA2_WRRD0
+#define IRQ_DMA2_WRRD1 (IVG_BASE + 56) /* MDMA2 1 write/read INT */
+#define IRQ_MEM_DMA3 IRQ_DMA2_WRRD1
+/* IVG 12 */
+#define IRQ_IMDMA_WRRD0 (IVG_BASE + 57) /* IMDMA 0 write/read INT */
+#define IRQ_IMEM_DMA0 IRQ_IMDMA_WRRD0
+#define IRQ_IMDMA_WRRD1 (IVG_BASE + 58) /* IMDMA 1 write/read INT */
+#define IRQ_IMEM_DMA1 IRQ_IMDMA_WRRD1
+/* IVG 13 */
+#define IRQ_WATCH (IVG_BASE + 59) /* Watch Dog Timer */
+/* IVG 7 */
+#define IRQ_RESERVED_1 (IVG_BASE + 60) /* Reserved interrupt */
+#define IRQ_RESERVED_2 (IVG_BASE + 61) /* Reserved interrupt */
+#define IRQ_SUPPLE_0 (IVG_BASE + 62) /* Supplemental interrupt 0 */
+#define IRQ_SUPPLE_1 (IVG_BASE + 63) /* supplemental interrupt 1 */
+#define IRQ_SW_INT1 71 /* Software Interrupt 1 */
+#define IRQ_SW_INT2 72 /* Software Interrupt 2 */
+ /* reserved for SYSCALL */
+#define IRQ_PF0 73
+#define IRQ_PF1 74
+#define IRQ_PF2 75
+#define IRQ_PF3 76
+#define IRQ_PF4 77
+#define IRQ_PF5 78
+#define IRQ_PF6 79
+#define IRQ_PF7 80
+#define IRQ_PF8 81
+#define IRQ_PF9 82
+#define IRQ_PF10 83
+#define IRQ_PF11 84
+#define IRQ_PF12 85
+#define IRQ_PF13 86
+#define IRQ_PF14 87
+#define IRQ_PF15 88
+#define IRQ_PF16 89
+#define IRQ_PF17 90
+#define IRQ_PF18 91
+#define IRQ_PF19 92
+#define IRQ_PF20 93
+#define IRQ_PF21 94
+#define IRQ_PF22 95
+#define IRQ_PF23 96
+#define IRQ_PF24 97
+#define IRQ_PF25 98
+#define IRQ_PF26 99
+#define IRQ_PF27 100
+#define IRQ_PF28 101
+#define IRQ_PF29 102
+#define IRQ_PF30 103
+#define IRQ_PF31 104
+#define IRQ_PF32 105
+#define IRQ_PF33 106
+#define IRQ_PF34 107
+#define IRQ_PF35 108
+#define IRQ_PF36 109
+#define IRQ_PF37 110
+#define IRQ_PF38 111
+#define IRQ_PF39 112
+#define IRQ_PF40 113
+#define IRQ_PF41 114
+#define IRQ_PF42 115
+#define IRQ_PF43 116
+#define IRQ_PF44 117
+#define IRQ_PF45 118
+#define IRQ_PF46 119
+#define IRQ_PF47 120
+
+#ifdef CONFIG_IRQCHIP_DEMUX_GPIO
+#define NR_IRQS (IRQ_PF47 + 1)
+#else
+#define NR_IRQS SYS_IRQS
+#endif
+
+#define IVG7 7
+#define IVG8 8
+#define IVG9 9
+#define IVG10 10
+#define IVG11 11
+#define IVG12 12
+#define IVG13 13
+#define IVG14 14
+#define IVG15 15
+
+/*
+ * DEFAULT PRIORITIES:
+ */
+
+#define CONFIG_DEF_PLL_WAKEUP 7
+#define CONFIG_DEF_DMA1_ERROR 7
+#define CONFIG_DEF_DMA2_ERROR 7
+#define CONFIG_DEF_IMDMA_ERROR 7
+#define CONFIG_DEF_PPI1_ERROR 7
+#define CONFIG_DEF_PPI2_ERROR 7
+#define CONFIG_DEF_SPORT0_ERROR 7
+#define CONFIG_DEF_SPORT1_ERROR 7
+#define CONFIG_DEF_SPI_ERROR 7
+#define CONFIG_DEF_UART_ERROR 7
+#define CONFIG_DEF_RESERVED_ERROR 7
+#define CONFIG_DEF_DMA1_0 8
+#define CONFIG_DEF_DMA1_1 8
+#define CONFIG_DEF_DMA1_2 8
+#define CONFIG_DEF_DMA1_3 8
+#define CONFIG_DEF_DMA1_4 8
+#define CONFIG_DEF_DMA1_5 8
+#define CONFIG_DEF_DMA1_6 8
+#define CONFIG_DEF_DMA1_7 8
+#define CONFIG_DEF_DMA1_8 8
+#define CONFIG_DEF_DMA1_9 8
+#define CONFIG_DEF_DMA1_10 8
+#define CONFIG_DEF_DMA1_11 8
+#define CONFIG_DEF_DMA2_0 9
+#define CONFIG_DEF_DMA2_1 9
+#define CONFIG_DEF_DMA2_2 9
+#define CONFIG_DEF_DMA2_3 9
+#define CONFIG_DEF_DMA2_4 9
+#define CONFIG_DEF_DMA2_5 9
+#define CONFIG_DEF_DMA2_6 9
+#define CONFIG_DEF_DMA2_7 9
+#define CONFIG_DEF_DMA2_8 9
+#define CONFIG_DEF_DMA2_9 9
+#define CONFIG_DEF_DMA2_10 9
+#define CONFIG_DEF_DMA2_11 9
+#define CONFIG_DEF_TIMER0 10
+#define CONFIG_DEF_TIMER1 10
+#define CONFIG_DEF_TIMER2 10
+#define CONFIG_DEF_TIMER3 10
+#define CONFIG_DEF_TIMER4 10
+#define CONFIG_DEF_TIMER5 10
+#define CONFIG_DEF_TIMER6 10
+#define CONFIG_DEF_TIMER7 10
+#define CONFIG_DEF_TIMER8 10
+#define CONFIG_DEF_TIMER9 10
+#define CONFIG_DEF_TIMER10 10
+#define CONFIG_DEF_TIMER11 10
+#define CONFIG_DEF_PROG0_INTA 11
+#define CONFIG_DEF_PROG0_INTB 11
+#define CONFIG_DEF_PROG1_INTA 11
+#define CONFIG_DEF_PROG1_INTB 11
+#define CONFIG_DEF_PROG2_INTA 11
+#define CONFIG_DEF_PROG2_INTB 11
+#define CONFIG_DEF_DMA1_WRRD0 8
+#define CONFIG_DEF_DMA1_WRRD1 8
+#define CONFIG_DEF_DMA2_WRRD0 9
+#define CONFIG_DEF_DMA2_WRRD1 9
+#define CONFIG_DEF_IMDMA_WRRD0 12
+#define CONFIG_DEF_IMDMA_WRRD1 12
+#define CONFIG_DEF_WATCH 13
+#define CONFIG_DEF_RESERVED_1 7
+#define CONFIG_DEF_RESERVED_2 7
+#define CONFIG_DEF_SUPPLE_0 7
+#define CONFIG_DEF_SUPPLE_1 7
+
+/* IAR0 BIT FIELDS */
+#define IRQ_PLL_WAKEUP_POS 0
+#define IRQ_DMA1_ERROR_POS 4
+#define IRQ_DMA2_ERROR_POS 8
+#define IRQ_IMDMA_ERROR_POS 12
+#define IRQ_PPI0_ERROR_POS 16
+#define IRQ_PPI1_ERROR_POS 20
+#define IRQ_SPORT0_ERROR_POS 24
+#define IRQ_SPORT1_ERROR_POS 28
+/* IAR1 BIT FIELDS */
+#define IRQ_SPI_ERROR_POS 0
+#define IRQ_UART_ERROR_POS 4
+#define IRQ_RESERVED_ERROR_POS 8
+#define IRQ_DMA1_0_POS 12
+#define IRQ_DMA1_1_POS 16
+#define IRQ_DMA1_2_POS 20
+#define IRQ_DMA1_3_POS 24
+#define IRQ_DMA1_4_POS 28
+/* IAR2 BIT FIELDS */
+#define IRQ_DMA1_5_POS 0
+#define IRQ_DMA1_6_POS 4
+#define IRQ_DMA1_7_POS 8
+#define IRQ_DMA1_8_POS 12
+#define IRQ_DMA1_9_POS 16
+#define IRQ_DMA1_10_POS 20
+#define IRQ_DMA1_11_POS 24
+#define IRQ_DMA2_0_POS 28
+/* IAR3 BIT FIELDS */
+#define IRQ_DMA2_1_POS 0
+#define IRQ_DMA2_2_POS 4
+#define IRQ_DMA2_3_POS 8
+#define IRQ_DMA2_4_POS 12
+#define IRQ_DMA2_5_POS 16
+#define IRQ_DMA2_6_POS 20
+#define IRQ_DMA2_7_POS 24
+#define IRQ_DMA2_8_POS 28
+/* IAR4 BIT FIELDS */
+#define IRQ_DMA2_9_POS 0
+#define IRQ_DMA2_10_POS 4
+#define IRQ_DMA2_11_POS 8
+#define IRQ_TIMER0_POS 12
+#define IRQ_TIMER1_POS 16
+#define IRQ_TIMER2_POS 20
+#define IRQ_TIMER3_POS 24
+#define IRQ_TIMER4_POS 28
+/* IAR5 BIT FIELDS */
+#define IRQ_TIMER5_POS 0
+#define IRQ_TIMER6_POS 4
+#define IRQ_TIMER7_POS 8
+#define IRQ_TIMER8_POS 12
+#define IRQ_TIMER9_POS 16
+#define IRQ_TIMER10_POS 20
+#define IRQ_TIMER11_POS 24
+#define IRQ_PROG0_INTA_POS 28
+/* IAR6 BIT FIELDS */
+#define IRQ_PROG0_INTB_POS 0
+#define IRQ_PROG1_INTA_POS 4
+#define IRQ_PROG1_INTB_POS 8
+#define IRQ_PROG2_INTA_POS 12
+#define IRQ_PROG2_INTB_POS 16
+#define IRQ_DMA1_WRRD0_POS 20
+#define IRQ_DMA1_WRRD1_POS 24
+#define IRQ_DMA2_WRRD0_POS 28
+/* IAR7 BIT FIELDS */
+#define IRQ_DMA2_WRRD1_POS 0
+#define IRQ_IMDMA_WRRD0_POS 4
+#define IRQ_IMDMA_WRRD1_POS 8
+#define IRQ_WDTIMER_POS 12
+#define IRQ_RESERVED_1_POS 16
+#define IRQ_RESERVED_2_POS 20
+#define IRQ_SUPPLE_0_POS 24
+#define IRQ_SUPPLE_1_POS 28
+
+#endif /* _BF561_IRQ_H_ */
diff --git a/include/asm-blackfin/mach-bf561/mem_init.h b/include/asm-blackfin/mach-bf561/mem_init.h
new file mode 100644
index 0000000..439a589
--- /dev/null
+++ b/include/asm-blackfin/mach-bf561/mem_init.h
@@ -0,0 +1,322 @@
+/*
+ * File: include/asm-blackfin/mach-bf561/mem_init.h
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Rev:
+ *
+ * Modified:
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.
+ * If not, write to the Free Software Foundation,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#if (CONFIG_MEM_MT48LC16M16A2TG_75 || CONFIG_MEM_MT48LC64M4A2FB_7E || CONFIG_MEM_GENERIC_BOARD || CONFIG_MEM_MT48LC8M32B2B5_7)
+#if (CONFIG_SCLK_HZ > 119402985)
+#define SDRAM_tRP TRP_2
+#define SDRAM_tRP_num 2
+#define SDRAM_tRAS TRAS_7
+#define SDRAM_tRAS_num 7
+#define SDRAM_tRCD TRCD_2
+#define SDRAM_tWR TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 104477612) && (CONFIG_SCLK_HZ <= 119402985)
+#define SDRAM_tRP TRP_2
+#define SDRAM_tRP_num 2
+#define SDRAM_tRAS TRAS_6
+#define SDRAM_tRAS_num 6
+#define SDRAM_tRCD TRCD_2
+#define SDRAM_tWR TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 89552239) && (CONFIG_SCLK_HZ <= 104477612)
+#define SDRAM_tRP TRP_2
+#define SDRAM_tRP_num 2
+#define SDRAM_tRAS TRAS_5
+#define SDRAM_tRAS_num 5
+#define SDRAM_tRCD TRCD_2
+#define SDRAM_tWR TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 74626866) && (CONFIG_SCLK_HZ <= 89552239)
+#define SDRAM_tRP TRP_2
+#define SDRAM_tRP_num 2
+#define SDRAM_tRAS TRAS_4
+#define SDRAM_tRAS_num 4
+#define SDRAM_tRCD TRCD_2
+#define SDRAM_tWR TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 66666667) && (CONFIG_SCLK_HZ <= 74626866)
+#define SDRAM_tRP TRP_2
+#define SDRAM_tRP_num 2
+#define SDRAM_tRAS TRAS_3
+#define SDRAM_tRAS_num 3
+#define SDRAM_tRCD TRCD_2
+#define SDRAM_tWR TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 59701493) && (CONFIG_SCLK_HZ <= 66666667)
+#define SDRAM_tRP TRP_1
+#define SDRAM_tRP_num 1
+#define SDRAM_tRAS TRAS_4
+#define SDRAM_tRAS_num 3
+#define SDRAM_tRCD TRCD_1
+#define SDRAM_tWR TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 44776119) && (CONFIG_SCLK_HZ <= 59701493)
+#define SDRAM_tRP TRP_1
+#define SDRAM_tRP_num 1
+#define SDRAM_tRAS TRAS_3
+#define SDRAM_tRAS_num 3
+#define SDRAM_tRCD TRCD_1
+#define SDRAM_tWR TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 29850746) && (CONFIG_SCLK_HZ <= 44776119)
+#define SDRAM_tRP TRP_1
+#define SDRAM_tRP_num 1
+#define SDRAM_tRAS TRAS_2
+#define SDRAM_tRAS_num 2
+#define SDRAM_tRCD TRCD_1
+#define SDRAM_tWR TWR_2
+#endif
+#if (CONFIG_SCLK_HZ <= 29850746)
+#define SDRAM_tRP TRP_1
+#define SDRAM_tRP_num 1
+#define SDRAM_tRAS TRAS_1
+#define SDRAM_tRAS_num 1
+#define SDRAM_tRCD TRCD_1
+#define SDRAM_tWR TWR_2
+#endif
+#endif
+
+#if (CONFIG_MEM_MT48LC16M16A2TG_75)
+ /*SDRAM INFORMATION: */
+#define SDRAM_Tref 64 /* Refresh period in milliseconds */
+#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */
+#define SDRAM_CL CL_3
+#endif
+
+#if (CONFIG_MEM_MT48LC64M4A2FB_7E)
+ /*SDRAM INFORMATION: */
+#define SDRAM_Tref 64 /* Refresh period in milliseconds */
+#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */
+#define SDRAM_CL CL_3
+#endif
+
+#if (CONFIG_MEM_MT48LC8M32B2B5_7)
+ /*SDRAM INFORMATION: */
+#define SDRAM_Tref 64 /* Refresh period in milliseconds */
+#define SDRAM_NRA 4096 /* Number of row addresses in SDRAM */
+#define SDRAM_CL CL_3
+#endif
+
+#if (CONFIG_MEM_GENERIC_BOARD)
+ /*SDRAM INFORMATION: Modify this for your board */
+#define SDRAM_Tref 64 /* Refresh period in milliseconds */
+#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */
+#define SDRAM_CL CL_3
+#endif
+
+#if (CONFIG_MEM_SIZE == 128)
+#define SDRAM_SIZE EB0_SZ_128
+#endif
+#if (CONFIG_MEM_SIZE == 64)
+#define SDRAM_SIZE EB0_SZ_64
+#endif
+#if ( CONFIG_MEM_SIZE == 32)
+#define SDRAM_SIZE EB0_SZ_32
+#endif
+#if (CONFIG_MEM_SIZE == 16)
+#define SDRAM_SIZE EB0_SZ_16
+#endif
+#if (CONFIG_MEM_ADD_WIDTH == 11)
+#define SDRAM_WIDTH EB0_CAW_11
+#endif
+#if (CONFIG_MEM_ADD_WIDTH == 10)
+#define SDRAM_WIDTH EB0_CAW_10
+#endif
+#if (CONFIG_MEM_ADD_WIDTH == 9)
+#define SDRAM_WIDTH EB0_CAW_9
+#endif
+#if (CONFIG_MEM_ADD_WIDTH == 8)
+#define SDRAM_WIDTH EB0_CAW_8
+#endif
+
+#define mem_SDBCTL (SDRAM_WIDTH | SDRAM_SIZE | EB0_E)
+
+/* Equation from section 17 (p17-46) of BF533 HRM */
+#define mem_SDRRC (((CONFIG_SCLK_HZ / 1000) * SDRAM_Tref) / SDRAM_NRA) - (SDRAM_tRAS_num + SDRAM_tRP_num)
+
+/* Enable SCLK Out */
+#define mem_SDGCTL (SCTLE | SDRAM_CL | SDRAM_tRAS | SDRAM_tRP | SDRAM_tRCD | SDRAM_tWR | PSS)
+
+#if defined CONFIG_CLKIN_HALF
+#define CLKIN_HALF 1
+#else
+#define CLKIN_HALF 0
+#endif
+
+#if defined CONFIG_PLL_BYPASS
+#define PLL_BYPASS 1
+#else
+#define PLL_BYPASS 0
+#endif
+
+/***************************************Currently Not Being Used *********************************/
+#define flash_EBIU_AMBCTL_WAT ((CONFIG_FLASH_SPEED_BWAT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
+#define flash_EBIU_AMBCTL_RAT ((CONFIG_FLASH_SPEED_BRAT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
+#define flash_EBIU_AMBCTL_HT ((CONFIG_FLASH_SPEED_BHT * 4) / (4000000000 / CONFIG_SCLK_HZ))
+#define flash_EBIU_AMBCTL_ST ((CONFIG_FLASH_SPEED_BST * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
+#define flash_EBIU_AMBCTL_TT ((CONFIG_FLASH_SPEED_BTT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
+
+#if (flash_EBIU_AMBCTL_TT > 3)
+#define flash_EBIU_AMBCTL0_TT B0TT_4
+#endif
+#if (flash_EBIU_AMBCTL_TT == 3)
+#define flash_EBIU_AMBCTL0_TT B0TT_3
+#endif
+#if (flash_EBIU_AMBCTL_TT == 2)
+#define flash_EBIU_AMBCTL0_TT B0TT_2
+#endif
+#if (flash_EBIU_AMBCTL_TT < 2)
+#define flash_EBIU_AMBCTL0_TT B0TT_1
+#endif
+
+#if (flash_EBIU_AMBCTL_ST > 3)
+#define flash_EBIU_AMBCTL0_ST B0ST_4
+#endif
+#if (flash_EBIU_AMBCTL_ST == 3)
+#define flash_EBIU_AMBCTL0_ST B0ST_3
+#endif
+#if (flash_EBIU_AMBCTL_ST == 2)
+#define flash_EBIU_AMBCTL0_ST B0ST_2
+#endif
+#if (flash_EBIU_AMBCTL_ST < 2)
+#define flash_EBIU_AMBCTL0_ST B0ST_1
+#endif
+
+#if (flash_EBIU_AMBCTL_HT > 2)
+#define flash_EBIU_AMBCTL0_HT B0HT_3
+#endif
+#if (flash_EBIU_AMBCTL_HT == 2)
+#define flash_EBIU_AMBCTL0_HT B0HT_2
+#endif
+#if (flash_EBIU_AMBCTL_HT == 1)
+#define flash_EBIU_AMBCTL0_HT B0HT_1
+#endif
+#if (flash_EBIU_AMBCTL_HT == 0 && CONFIG_FLASH_SPEED_BHT == 0)
+#define flash_EBIU_AMBCTL0_HT B0HT_0
+#endif
+#if (flash_EBIU_AMBCTL_HT == 0 && CONFIG_FLASH_SPEED_BHT != 0)
+#define flash_EBIU_AMBCTL0_HT B0HT_1
+#endif
+
+#if (flash_EBIU_AMBCTL_WAT > 14)
+#define flash_EBIU_AMBCTL0_WAT B0WAT_15
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 14)
+#define flash_EBIU_AMBCTL0_WAT B0WAT_14
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 13)
+#define flash_EBIU_AMBCTL0_WAT B0WAT_13
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 12)
+#define flash_EBIU_AMBCTL0_WAT B0WAT_12
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 11)
+#define flash_EBIU_AMBCTL0_WAT B0WAT_11
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 10)
+#define flash_EBIU_AMBCTL0_WAT B0WAT_10
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 9)
+#define flash_EBIU_AMBCTL0_WAT B0WAT_9
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 8)
+#define flash_EBIU_AMBCTL0_WAT B0WAT_8
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 7)
+#define flash_EBIU_AMBCTL0_WAT B0WAT_7
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 6)
+#define flash_EBIU_AMBCTL0_WAT B0WAT_6
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 5)
+#define flash_EBIU_AMBCTL0_WAT B0WAT_5
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 4)
+#define flash_EBIU_AMBCTL0_WAT B0WAT_4
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 3)
+#define flash_EBIU_AMBCTL0_WAT B0WAT_3
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 2)
+#define flash_EBIU_AMBCTL0_WAT B0WAT_2
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 1)
+#define flash_EBIU_AMBCTL0_WAT B0WAT_1
+#endif
+
+#if (flash_EBIU_AMBCTL_RAT > 14)
+#define flash_EBIU_AMBCTL0_RAT B0RAT_15
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 14)
+#define flash_EBIU_AMBCTL0_RAT B0RAT_14
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 13)
+#define flash_EBIU_AMBCTL0_RAT B0RAT_13
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 12)
+#define flash_EBIU_AMBCTL0_RAT B0RAT_12
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 11)
+#define flash_EBIU_AMBCTL0_RAT B0RAT_11
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 10)
+#define flash_EBIU_AMBCTL0_RAT B0RAT_10
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 9)
+#define flash_EBIU_AMBCTL0_RAT B0RAT_9
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 8)
+#define flash_EBIU_AMBCTL0_RAT B0RAT_8
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 7)
+#define flash_EBIU_AMBCTL0_RAT B0RAT_7
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 6)
+#define flash_EBIU_AMBCTL0_RAT B0RAT_6
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 5)
+#define flash_EBIU_AMBCTL0_RAT B0RAT_5
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 4)
+#define flash_EBIU_AMBCTL0_RAT B0RAT_4
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 3)
+#define flash_EBIU_AMBCTL0_RAT B0RAT_3
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 2)
+#define flash_EBIU_AMBCTL0_RAT B0RAT_2
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 1)
+#define flash_EBIU_AMBCTL0_RAT B0RAT_1
+#endif
+
+#define flash_EBIU_AMBCTL0 \
+ (flash_EBIU_AMBCTL0_WAT | flash_EBIU_AMBCTL0_RAT | flash_EBIU_AMBCTL0_HT | \
+ flash_EBIU_AMBCTL0_ST | flash_EBIU_AMBCTL0_TT | CONFIG_FLASH_SPEED_RDYEN)
diff --git a/include/asm-blackfin/mach-bf561/mem_map.h b/include/asm-blackfin/mach-bf561/mem_map.h
new file mode 100644
index 0000000..ebac9a8
--- /dev/null
+++ b/include/asm-blackfin/mach-bf561/mem_map.h
@@ -0,0 +1,75 @@
+/*
+ * Memory MAP
+ * Common header file for blackfin BF561 of processors.
+ */
+
+#ifndef _MEM_MAP_561_H_
+#define _MEM_MAP_561_H_
+
+#define COREMMR_BASE 0xFFE00000 /* Core MMRs */
+#define SYSMMR_BASE 0xFFC00000 /* System MMRs */
+
+/* Async Memory Banks */
+#define ASYNC_BANK3_BASE 0x2C000000 /* Async Bank 3 */
+#define ASYNC_BANK3_SIZE 0x04000000 /* 64M */
+#define ASYNC_BANK2_BASE 0x28000000 /* Async Bank 2 */
+#define ASYNC_BANK2_SIZE 0x04000000 /* 64M */
+#define ASYNC_BANK1_BASE 0x24000000 /* Async Bank 1 */
+#define ASYNC_BANK1_SIZE 0x04000000 /* 64M */
+#define ASYNC_BANK0_BASE 0x20000000 /* Async Bank 0 */
+#define ASYNC_BANK0_SIZE 0x04000000 /* 64M */
+
+/* Level 1 Memory */
+
+#ifdef CONFIG_BLKFIN_CACHE
+#define BLKFIN_ICACHESIZE (16*1024)
+#else
+#define BLKFIN_ICACHESIZE (0*1024)
+#endif
+
+/* Memory Map for ADSP-BF561 processors */
+
+#ifdef CONFIG_BF561
+#define L1_CODE_START 0xFFA00000
+#define L1_DATA_A_START 0xFF800000
+#define L1_DATA_B_START 0xFF900000
+
+#define L1_CODE_LENGTH 0x4000
+
+#ifdef CONFIG_BLKFIN_DCACHE
+
+#ifdef CONFIG_BLKFIN_DCACHE_BANKA
+#define DMEM_CNTR (ACACHE_BSRAM | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH (0x8000 - 0x4000)
+#define L1_DATA_B_LENGTH 0x8000
+#define BLKFIN_DCACHESIZE (16*1024)
+#define BLKFIN_DSUPBANKS 1
+#else
+#define DMEM_CNTR (ACACHE_BCACHE | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH (0x8000 - 0x4000)
+#define L1_DATA_B_LENGTH (0x8000 - 0x4000)
+#define BLKFIN_DCACHESIZE (32*1024)
+#define BLKFIN_DSUPBANKS 2
+#endif
+
+#else
+#define DMEM_CNTR (ASRAM_BSRAM | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH 0x8000
+#define L1_DATA_B_LENGTH 0x8000
+#define BLKFIN_DCACHESIZE (0*1024)
+#define BLKFIN_DSUPBANKS 0
+#endif /*CONFIG_BLKFIN_DCACHE*/
+#endif
+
+/* Level 2 Memory */
+#define L2_START 0xFEB00000
+#define L2_LENGTH 0x20000
+
+/* Scratch Pad Memory */
+
+#if defined(CONFIG_BF561)
+#define L1_SCRATCH_START 0xFFB00000
+#define L1_SCRATCH_LENGTH 0x1000
+#endif
+
+#endif /* _MEM_MAP_533_H_ */
diff --git a/include/asm-blackfin/mach-common/cdef_LPBlackfin.h b/include/asm-blackfin/mach-common/cdef_LPBlackfin.h
new file mode 100644
index 0000000..22aa5e6
--- /dev/null
+++ b/include/asm-blackfin/mach-common/cdef_LPBlackfin.h
@@ -0,0 +1,471 @@
+ /*
+ * File: include/asm-blackfin/mach-common/cdef_LPBlackfin.h
+ * Based on:
+ * Author: unknown
+ * COPYRIGHT 2005 Analog Devices
+ * Created: ?
+ * Description:
+ *
+ * Modified:
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.
+ * If not, write to the Free Software Foundation,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef _CDEF_LPBLACKFIN_H
+#define _CDEF_LPBLACKFIN_H
+
+/*#if !defined(__ADSPLPBLACKFIN__)
+#warning cdef_LPBlackfin.h should only be included for 532 compatible chips.
+#endif
+*/
+#include <asm/mach-common/def_LPBlackfin.h>
+
+/*Cache & SRAM Memory*/
+#define pSRAM_BASE_ADDRESS ((volatile void **)SRAM_BASE_ADDRESS)
+#define bfin_read_SRAM_BASE_ADDRESS() bfin_read32(SRAM_BASE_ADDRESS)
+#define bfin_write_SRAM_BASE_ADDRESS(val) bfin_write32(SRAM_BASE_ADDRESS,val)
+#define pDMEM_CONTROL ((volatile unsigned long *)DMEM_CONTROL)
+#define bfin_read_DMEM_CONTROL() bfin_read32(DMEM_CONTROL)
+#define bfin_write_DMEM_CONTROL(val) bfin_write32(DMEM_CONTROL,val)
+#define pDCPLB_STATUS ((volatile unsigned long *)DCPLB_STATUS)
+#define bfin_read_DCPLB_STATUS() bfin_read32(DCPLB_STATUS)
+#define bfin_write_DCPLB_STATUS(val) bfin_write32(DCPLB_STATUS,val)
+#define pDCPLB_FAULT_ADDR ((volatile void **)DCPLB_FAULT_ADDR)
+#define bfin_read_DCPLB_FAULT_ADDR() bfin_read32(DCPLB_FAULT_ADDR)
+#define bfin_write_DCPLB_FAULT_ADDR(val) bfin_write32(DCPLB_FAULT_ADDR,val)
+/*
+#define MMR_TIMEOUT 0xFFE00010
+*/
+#define pDCPLB_ADDR0 ((volatile void **)DCPLB_ADDR0)
+#define bfin_read_DCPLB_ADDR0() bfin_read32(DCPLB_ADDR0)
+#define bfin_write_DCPLB_ADDR0(val) bfin_write32(DCPLB_ADDR0,val)
+#define pDCPLB_ADDR1 ((volatile void **)DCPLB_ADDR1)
+#define bfin_read_DCPLB_ADDR1() bfin_read32(DCPLB_ADDR1)
+#define bfin_write_DCPLB_ADDR1(val) bfin_write32(DCPLB_ADDR1,val)
+#define pDCPLB_ADDR2 ((volatile void **)DCPLB_ADDR2)
+#define bfin_read_DCPLB_ADDR2() bfin_read32(DCPLB_ADDR2)
+#define bfin_write_DCPLB_ADDR2(val) bfin_write32(DCPLB_ADDR2,val)
+#define pDCPLB_ADDR3 ((volatile void **)DCPLB_ADDR3)
+#define bfin_read_DCPLB_ADDR3() bfin_read32(DCPLB_ADDR3)
+#define bfin_write_DCPLB_ADDR3(val) bfin_write32(DCPLB_ADDR3,val)
+#define pDCPLB_ADDR4 ((volatile void **)DCPLB_ADDR4)
+#define bfin_read_DCPLB_ADDR4() bfin_read32(DCPLB_ADDR4)
+#define bfin_write_DCPLB_ADDR4(val) bfin_write32(DCPLB_ADDR4,val)
+#define pDCPLB_ADDR5 ((volatile void **)DCPLB_ADDR5)
+#define bfin_read_DCPLB_ADDR5() bfin_read32(DCPLB_ADDR5)
+#define bfin_write_DCPLB_ADDR5(val) bfin_write32(DCPLB_ADDR5,val)
+#define pDCPLB_ADDR6 ((volatile void **)DCPLB_ADDR6)
+#define bfin_read_DCPLB_ADDR6() bfin_read32(DCPLB_ADDR6)
+#define bfin_write_DCPLB_ADDR6(val) bfin_write32(DCPLB_ADDR6,val)
+#define pDCPLB_ADDR7 ((volatile void **)DCPLB_ADDR7)
+#define bfin_read_DCPLB_ADDR7() bfin_read32(DCPLB_ADDR7)
+#define bfin_write_DCPLB_ADDR7(val) bfin_write32(DCPLB_ADDR7,val)
+#define pDCPLB_ADDR8 ((volatile void **)DCPLB_ADDR8)
+#define bfin_read_DCPLB_ADDR8() bfin_read32(DCPLB_ADDR8)
+#define bfin_write_DCPLB_ADDR8(val) bfin_write32(DCPLB_ADDR8,val)
+#define pDCPLB_ADDR9 ((volatile void **)DCPLB_ADDR9)
+#define bfin_read_DCPLB_ADDR9() bfin_read32(DCPLB_ADDR9)
+#define bfin_write_DCPLB_ADDR9(val) bfin_write32(DCPLB_ADDR9,val)
+#define pDCPLB_ADDR10 ((volatile void **)DCPLB_ADDR10)
+#define bfin_read_DCPLB_ADDR10() bfin_read32(DCPLB_ADDR10)
+#define bfin_write_DCPLB_ADDR10(val) bfin_write32(DCPLB_ADDR10,val)
+#define pDCPLB_ADDR11 ((volatile void **)DCPLB_ADDR11)
+#define bfin_read_DCPLB_ADDR11() bfin_read32(DCPLB_ADDR11)
+#define bfin_write_DCPLB_ADDR11(val) bfin_write32(DCPLB_ADDR11,val)
+#define pDCPLB_ADDR12 ((volatile void **)DCPLB_ADDR12)
+#define bfin_read_DCPLB_ADDR12() bfin_read32(DCPLB_ADDR12)
+#define bfin_write_DCPLB_ADDR12(val) bfin_write32(DCPLB_ADDR12,val)
+#define pDCPLB_ADDR13 ((volatile void **)DCPLB_ADDR13)
+#define bfin_read_DCPLB_ADDR13() bfin_read32(DCPLB_ADDR13)
+#define bfin_write_DCPLB_ADDR13(val) bfin_write32(DCPLB_ADDR13,val)
+#define pDCPLB_ADDR14 ((volatile void **)DCPLB_ADDR14)
+#define bfin_read_DCPLB_ADDR14() bfin_read32(DCPLB_ADDR14)
+#define bfin_write_DCPLB_ADDR14(val) bfin_write32(DCPLB_ADDR14,val)
+#define pDCPLB_ADDR15 ((volatile void **)DCPLB_ADDR15)
+#define bfin_read_DCPLB_ADDR15() bfin_read32(DCPLB_ADDR15)
+#define bfin_write_DCPLB_ADDR15(val) bfin_write32(DCPLB_ADDR15,val)
+#define pDCPLB_DATA0 ((volatile unsigned long *)DCPLB_DATA0)
+#define bfin_read_DCPLB_DATA0() bfin_read32(DCPLB_DATA0)
+#define bfin_write_DCPLB_DATA0(val) bfin_write32(DCPLB_DATA0,val)
+#define pDCPLB_DATA1 ((volatile unsigned long *)DCPLB_DATA1)
+#define bfin_read_DCPLB_DATA1() bfin_read32(DCPLB_DATA1)
+#define bfin_write_DCPLB_DATA1(val) bfin_write32(DCPLB_DATA1,val)
+#define pDCPLB_DATA2 ((volatile unsigned long *)DCPLB_DATA2)
+#define bfin_read_DCPLB_DATA2() bfin_read32(DCPLB_DATA2)
+#define bfin_write_DCPLB_DATA2(val) bfin_write32(DCPLB_DATA2,val)
+#define pDCPLB_DATA3 ((volatile unsigned long *)DCPLB_DATA3)
+#define bfin_read_DCPLB_DATA3() bfin_read32(DCPLB_DATA3)
+#define bfin_write_DCPLB_DATA3(val) bfin_write32(DCPLB_DATA3,val)
+#define pDCPLB_DATA4 ((volatile unsigned long *)DCPLB_DATA4)
+#define bfin_read_DCPLB_DATA4() bfin_read32(DCPLB_DATA4)
+#define bfin_write_DCPLB_DATA4(val) bfin_write32(DCPLB_DATA4,val)
+#define pDCPLB_DATA5 ((volatile unsigned long *)DCPLB_DATA5)
+#define bfin_read_DCPLB_DATA5() bfin_read32(DCPLB_DATA5)
+#define bfin_write_DCPLB_DATA5(val) bfin_write32(DCPLB_DATA5,val)
+#define pDCPLB_DATA6 ((volatile unsigned long *)DCPLB_DATA6)
+#define bfin_read_DCPLB_DATA6() bfin_read32(DCPLB_DATA6)
+#define bfin_write_DCPLB_DATA6(val) bfin_write32(DCPLB_DATA6,val)
+#define pDCPLB_DATA7 ((volatile unsigned long *)DCPLB_DATA7)
+#define bfin_read_DCPLB_DATA7() bfin_read32(DCPLB_DATA7)
+#define bfin_write_DCPLB_DATA7(val) bfin_write32(DCPLB_DATA7,val)
+#define pDCPLB_DATA8 ((volatile unsigned long *)DCPLB_DATA8)
+#define bfin_read_DCPLB_DATA8() bfin_read32(DCPLB_DATA8)
+#define bfin_write_DCPLB_DATA8(val) bfin_write32(DCPLB_DATA8,val)
+#define pDCPLB_DATA9 ((volatile unsigned long *)DCPLB_DATA9)
+#define bfin_read_DCPLB_DATA9() bfin_read32(DCPLB_DATA9)
+#define bfin_write_DCPLB_DATA9(val) bfin_write32(DCPLB_DATA9,val)
+#define pDCPLB_DATA10 ((volatile unsigned long *)DCPLB_DATA10)
+#define bfin_read_DCPLB_DATA10() bfin_read32(DCPLB_DATA10)
+#define bfin_write_DCPLB_DATA10(val) bfin_write32(DCPLB_DATA10,val)
+#define pDCPLB_DATA11 ((volatile unsigned long *)DCPLB_DATA11)
+#define bfin_read_DCPLB_DATA11() bfin_read32(DCPLB_DATA11)
+#define bfin_write_DCPLB_DATA11(val) bfin_write32(DCPLB_DATA11,val)
+#define pDCPLB_DATA12 ((volatile unsigned long *)DCPLB_DATA12)
+#define bfin_read_DCPLB_DATA12() bfin_read32(DCPLB_DATA12)
+#define bfin_write_DCPLB_DATA12(val) bfin_write32(DCPLB_DATA12,val)
+#define pDCPLB_DATA13 ((volatile unsigned long *)DCPLB_DATA13)
+#define bfin_read_DCPLB_DATA13() bfin_read32(DCPLB_DATA13)
+#define bfin_write_DCPLB_DATA13(val) bfin_write32(DCPLB_DATA13,val)
+#define pDCPLB_DATA14 ((volatile unsigned long *)DCPLB_DATA14)
+#define bfin_read_DCPLB_DATA14() bfin_read32(DCPLB_DATA14)
+#define bfin_write_DCPLB_DATA14(val) bfin_write32(DCPLB_DATA14,val)
+#define pDCPLB_DATA15 ((volatile unsigned long *)DCPLB_DATA15)
+#define bfin_read_DCPLB_DATA15() bfin_read32(DCPLB_DATA15)
+#define bfin_write_DCPLB_DATA15(val) bfin_write32(DCPLB_DATA15,val)
+#define pDTEST_COMMAND ((volatile unsigned long *)DTEST_COMMAND)
+#define bfin_read_DTEST_COMMAND() bfin_read32(DTEST_COMMAND)
+#define bfin_write_DTEST_COMMAND(val) bfin_write32(DTEST_COMMAND,val)
+/*
+#define DTEST_INDEX 0xFFE00304
+*/
+#define pDTEST_DATA0 ((volatile unsigned long *)DTEST_DATA0)
+#define bfin_read_DTEST_DATA0() bfin_read32(DTEST_DATA0)
+#define bfin_write_DTEST_DATA0(val) bfin_write32(DTEST_DATA0,val)
+#define pDTEST_DATA1 ((volatile unsigned long *)DTEST_DATA1)
+#define bfin_read_DTEST_DATA1() bfin_read32(DTEST_DATA1)
+#define bfin_write_DTEST_DATA1(val) bfin_write32(DTEST_DATA1,val)
+/*
+#define DTEST_DATA2 0xFFE00408
+#define DTEST_DATA3 0xFFE0040C
+*/
+#define pIMEM_CONTROL ((volatile unsigned long *)IMEM_CONTROL)
+#define bfin_read_IMEM_CONTROL() bfin_read32(IMEM_CONTROL)
+#define bfin_write_IMEM_CONTROL(val) bfin_write32(IMEM_CONTROL,val)
+#define pICPLB_STATUS ((volatile unsigned long *)ICPLB_STATUS)
+#define bfin_read_ICPLB_STATUS() bfin_read32(ICPLB_STATUS)
+#define bfin_write_ICPLB_STATUS(val) bfin_write32(ICPLB_STATUS,val)
+#define pICPLB_FAULT_ADDR ((volatile void **)ICPLB_FAULT_ADDR)
+#define bfin_read_ICPLB_FAULT_ADDR() bfin_read32(ICPLB_FAULT_ADDR)
+#define bfin_write_ICPLB_FAULT_ADDR(val) bfin_write32(ICPLB_FAULT_ADDR,val)
+#define pICPLB_ADDR0 ((volatile void **)ICPLB_ADDR0)
+#define bfin_read_ICPLB_ADDR0() bfin_read32(ICPLB_ADDR0)
+#define bfin_write_ICPLB_ADDR0(val) bfin_write32(ICPLB_ADDR0,val)
+#define pICPLB_ADDR1 ((volatile void **)ICPLB_ADDR1)
+#define bfin_read_ICPLB_ADDR1() bfin_read32(ICPLB_ADDR1)
+#define bfin_write_ICPLB_ADDR1(val) bfin_write32(ICPLB_ADDR1,val)
+#define pICPLB_ADDR2 ((volatile void **)ICPLB_ADDR2)
+#define bfin_read_ICPLB_ADDR2() bfin_read32(ICPLB_ADDR2)
+#define bfin_write_ICPLB_ADDR2(val) bfin_write32(ICPLB_ADDR2,val)
+#define pICPLB_ADDR3 ((volatile void **)ICPLB_ADDR3)
+#define bfin_read_ICPLB_ADDR3() bfin_read32(ICPLB_ADDR3)
+#define bfin_write_ICPLB_ADDR3(val) bfin_write32(ICPLB_ADDR3,val)
+#define pICPLB_ADDR4 ((volatile void **)ICPLB_ADDR4)
+#define bfin_read_ICPLB_ADDR4() bfin_read32(ICPLB_ADDR4)
+#define bfin_write_ICPLB_ADDR4(val) bfin_write32(ICPLB_ADDR4,val)
+#define pICPLB_ADDR5 ((volatile void **)ICPLB_ADDR5)
+#define bfin_read_ICPLB_ADDR5() bfin_read32(ICPLB_ADDR5)
+#define bfin_write_ICPLB_ADDR5(val) bfin_write32(ICPLB_ADDR5,val)
+#define pICPLB_ADDR6 ((volatile void **)ICPLB_ADDR6)
+#define bfin_read_ICPLB_ADDR6() bfin_read32(ICPLB_ADDR6)
+#define bfin_write_ICPLB_ADDR6(val) bfin_write32(ICPLB_ADDR6,val)
+#define pICPLB_ADDR7 ((volatile void **)ICPLB_ADDR7)
+#define bfin_read_ICPLB_ADDR7() bfin_read32(ICPLB_ADDR7)
+#define bfin_write_ICPLB_ADDR7(val) bfin_write32(ICPLB_ADDR7,val)
+#define pICPLB_ADDR8 ((volatile void **)ICPLB_ADDR8)
+#define bfin_read_ICPLB_ADDR8() bfin_read32(ICPLB_ADDR8)
+#define bfin_write_ICPLB_ADDR8(val) bfin_write32(ICPLB_ADDR8,val)
+#define pICPLB_ADDR9 ((volatile void **)ICPLB_ADDR9)
+#define bfin_read_ICPLB_ADDR9() bfin_read32(ICPLB_ADDR9)
+#define bfin_write_ICPLB_ADDR9(val) bfin_write32(ICPLB_ADDR9,val)
+#define pICPLB_ADDR10 ((volatile void **)ICPLB_ADDR10)
+#define bfin_read_ICPLB_ADDR10() bfin_read32(ICPLB_ADDR10)
+#define bfin_write_ICPLB_ADDR10(val) bfin_write32(ICPLB_ADDR10,val)
+#define pICPLB_ADDR11 ((volatile void **)ICPLB_ADDR11)
+#define bfin_read_ICPLB_ADDR11() bfin_read32(ICPLB_ADDR11)
+#define bfin_write_ICPLB_ADDR11(val) bfin_write32(ICPLB_ADDR11,val)
+#define pICPLB_ADDR12 ((volatile void **)ICPLB_ADDR12)
+#define bfin_read_ICPLB_ADDR12() bfin_read32(ICPLB_ADDR12)
+#define bfin_write_ICPLB_ADDR12(val) bfin_write32(ICPLB_ADDR12,val)
+#define pICPLB_ADDR13 ((volatile void **)ICPLB_ADDR13)
+#define bfin_read_ICPLB_ADDR13() bfin_read32(ICPLB_ADDR13)
+#define bfin_write_ICPLB_ADDR13(val) bfin_write32(ICPLB_ADDR13,val)
+#define pICPLB_ADDR14 ((volatile void **)ICPLB_ADDR14)
+#define bfin_read_ICPLB_ADDR14() bfin_read32(ICPLB_ADDR14)
+#define bfin_write_ICPLB_ADDR14(val) bfin_write32(ICPLB_ADDR14,val)
+#define pICPLB_ADDR15 ((volatile void **)ICPLB_ADDR15)
+#define bfin_read_ICPLB_ADDR15() bfin_read32(ICPLB_ADDR15)
+#define bfin_write_ICPLB_ADDR15(val) bfin_write32(ICPLB_ADDR15,val)
+#define pICPLB_DATA0 ((volatile unsigned long *)ICPLB_DATA0)
+#define bfin_read_ICPLB_DATA0() bfin_read32(ICPLB_DATA0)
+#define bfin_write_ICPLB_DATA0(val) bfin_write32(ICPLB_DATA0,val)
+#define pICPLB_DATA1 ((volatile unsigned long *)ICPLB_DATA1)
+#define bfin_read_ICPLB_DATA1() bfin_read32(ICPLB_DATA1)
+#define bfin_write_ICPLB_DATA1(val) bfin_write32(ICPLB_DATA1,val)
+#define pICPLB_DATA2 ((volatile unsigned long *)ICPLB_DATA2)
+#define bfin_read_ICPLB_DATA2() bfin_read32(ICPLB_DATA2)
+#define bfin_write_ICPLB_DATA2(val) bfin_write32(ICPLB_DATA2,val)
+#define pICPLB_DATA3 ((volatile unsigned long *)ICPLB_DATA3)
+#define bfin_read_ICPLB_DATA3() bfin_read32(ICPLB_DATA3)
+#define bfin_write_ICPLB_DATA3(val) bfin_write32(ICPLB_DATA3,val)
+#define pICPLB_DATA4 ((volatile unsigned long *)ICPLB_DATA4)
+#define bfin_read_ICPLB_DATA4() bfin_read32(ICPLB_DATA4)
+#define bfin_write_ICPLB_DATA4(val) bfin_write32(ICPLB_DATA4,val)
+#define pICPLB_DATA5 ((volatile unsigned long *)ICPLB_DATA5)
+#define bfin_read_ICPLB_DATA5() bfin_read32(ICPLB_DATA5)
+#define bfin_write_ICPLB_DATA5(val) bfin_write32(ICPLB_DATA5,val)
+#define pICPLB_DATA6 ((volatile unsigned long *)ICPLB_DATA6)
+#define bfin_read_ICPLB_DATA6() bfin_read32(ICPLB_DATA6)
+#define bfin_write_ICPLB_DATA6(val) bfin_write32(ICPLB_DATA6,val)
+#define pICPLB_DATA7 ((volatile unsigned long *)ICPLB_DATA7)
+#define bfin_read_ICPLB_DATA7() bfin_read32(ICPLB_DATA7)
+#define bfin_write_ICPLB_DATA7(val) bfin_write32(ICPLB_DATA7,val)
+#define pICPLB_DATA8 ((volatile unsigned long *)ICPLB_DATA8)
+#define bfin_read_ICPLB_DATA8() bfin_read32(ICPLB_DATA8)
+#define bfin_write_ICPLB_DATA8(val) bfin_write32(ICPLB_DATA8,val)
+#define pICPLB_DATA9 ((volatile unsigned long *)ICPLB_DATA9)
+#define bfin_read_ICPLB_DATA9() bfin_read32(ICPLB_DATA9)
+#define bfin_write_ICPLB_DATA9(val) bfin_write32(ICPLB_DATA9,val)
+#define pICPLB_DATA10 ((volatile unsigned long *)ICPLB_DATA10)
+#define bfin_read_ICPLB_DATA10() bfin_read32(ICPLB_DATA10)
+#define bfin_write_ICPLB_DATA10(val) bfin_write32(ICPLB_DATA10,val)
+#define pICPLB_DATA11 ((volatile unsigned long *)ICPLB_DATA11)
+#define bfin_read_ICPLB_DATA11() bfin_read32(ICPLB_DATA11)
+#define bfin_write_ICPLB_DATA11(val) bfin_write32(ICPLB_DATA11,val)
+#define pICPLB_DATA12 ((volatile unsigned long *)ICPLB_DATA12)
+#define bfin_read_ICPLB_DATA12() bfin_read32(ICPLB_DATA12)
+#define bfin_write_ICPLB_DATA12(val) bfin_write32(ICPLB_DATA12,val)
+#define pICPLB_DATA13 ((volatile unsigned long *)ICPLB_DATA13)
+#define bfin_read_ICPLB_DATA13() bfin_read32(ICPLB_DATA13)
+#define bfin_write_ICPLB_DATA13(val) bfin_write32(ICPLB_DATA13,val)
+#define pICPLB_DATA14 ((volatile unsigned long *)ICPLB_DATA14)
+#define bfin_read_ICPLB_DATA14() bfin_read32(ICPLB_DATA14)
+#define bfin_write_ICPLB_DATA14(val) bfin_write32(ICPLB_DATA14,val)
+#define pICPLB_DATA15 ((volatile unsigned long *)ICPLB_DATA15)
+#define bfin_read_ICPLB_DATA15() bfin_read32(ICPLB_DATA15)
+#define bfin_write_ICPLB_DATA15(val) bfin_write32(ICPLB_DATA15,val)
+#define pITEST_COMMAND ((volatile unsigned long *)ITEST_COMMAND)
+#define bfin_read_ITEST_COMMAND() bfin_read32(ITEST_COMMAND)
+#define bfin_write_ITEST_COMMAND(val) bfin_write32(ITEST_COMMAND,val)
+#if 0
+#define ITEST_INDEX 0xFFE01304 /* Instruction Test Index Register */
+#endif
+#define pITEST_DATA0 ((volatile unsigned long *)ITEST_DATA0)
+#define bfin_read_ITEST_DATA0() bfin_read32(ITEST_DATA0)
+#define bfin_write_ITEST_DATA0(val) bfin_write32(ITEST_DATA0,val)
+#define pITEST_DATA1 ((volatile unsigned long *)ITEST_DATA1)
+#define bfin_read_ITEST_DATA1() bfin_read32(ITEST_DATA1)
+#define bfin_write_ITEST_DATA1(val) bfin_write32(ITEST_DATA1,val)
+
+/* Event/Interrupt Registers*/
+
+#define pEVT0 ((volatile void **)EVT0)
+#define bfin_read_EVT0() bfin_read32(EVT0)
+#define bfin_write_EVT0(val) bfin_write32(EVT0,val)
+#define pEVT1 ((volatile void **)EVT1)
+#define bfin_read_EVT1() bfin_read32(EVT1)
+#define bfin_write_EVT1(val) bfin_write32(EVT1,val)
+#define pEVT2 ((volatile void **)EVT2)
+#define bfin_read_EVT2() bfin_read32(EVT2)
+#define bfin_write_EVT2(val) bfin_write32(EVT2,val)
+#define pEVT3 ((volatile void **)EVT3)
+#define bfin_read_EVT3() bfin_read32(EVT3)
+#define bfin_write_EVT3(val) bfin_write32(EVT3,val)
+#define pEVT4 ((volatile void **)EVT4)
+#define bfin_read_EVT4() bfin_read32(EVT4)
+#define bfin_write_EVT4(val) bfin_write32(EVT4,val)
+#define pEVT5 ((volatile void **)EVT5)
+#define bfin_read_EVT5() bfin_read32(EVT5)
+#define bfin_write_EVT5(val) bfin_write32(EVT5,val)
+#define pEVT6 ((volatile void **)EVT6)
+#define bfin_read_EVT6() bfin_read32(EVT6)
+#define bfin_write_EVT6(val) bfin_write32(EVT6,val)
+#define pEVT7 ((volatile void **)EVT7)
+#define bfin_read_EVT7() bfin_read32(EVT7)
+#define bfin_write_EVT7(val) bfin_write32(EVT7,val)
+#define pEVT8 ((volatile void **)EVT8)
+#define bfin_read_EVT8() bfin_read32(EVT8)
+#define bfin_write_EVT8(val) bfin_write32(EVT8,val)
+#define pEVT9 ((volatile void **)EVT9)
+#define bfin_read_EVT9() bfin_read32(EVT9)
+#define bfin_write_EVT9(val) bfin_write32(EVT9,val)
+#define pEVT10 ((volatile void **)EVT10)
+#define bfin_read_EVT10() bfin_read32(EVT10)
+#define bfin_write_EVT10(val) bfin_write32(EVT10,val)
+#define pEVT11 ((volatile void **)EVT11)
+#define bfin_read_EVT11() bfin_read32(EVT11)
+#define bfin_write_EVT11(val) bfin_write32(EVT11,val)
+#define pEVT12 ((volatile void **)EVT12)
+#define bfin_read_EVT12() bfin_read32(EVT12)
+#define bfin_write_EVT12(val) bfin_write32(EVT12,val)
+#define pEVT13 ((volatile void **)EVT13)
+#define bfin_read_EVT13() bfin_read32(EVT13)
+#define bfin_write_EVT13(val) bfin_write32(EVT13,val)
+#define pEVT14 ((volatile void **)EVT14)
+#define bfin_read_EVT14() bfin_read32(EVT14)
+#define bfin_write_EVT14(val) bfin_write32(EVT14,val)
+#define pEVT15 ((volatile void **)EVT15)
+#define bfin_read_EVT15() bfin_read32(EVT15)
+#define bfin_write_EVT15(val) bfin_write32(EVT15,val)
+#define pIMASK ((volatile unsigned long *)IMASK)
+#define bfin_read_IMASK() bfin_read32(IMASK)
+#define bfin_write_IMASK(val) bfin_write32(IMASK,val)
+#define pIPEND ((volatile unsigned long *)IPEND)
+#define bfin_read_IPEND() bfin_read32(IPEND)
+#define bfin_write_IPEND(val) bfin_write32(IPEND,val)
+#define pILAT ((volatile unsigned long *)ILAT)
+#define bfin_read_ILAT() bfin_read32(ILAT)
+#define bfin_write_ILAT(val) bfin_write32(ILAT,val)
+
+/*Core Timer Registers*/
+#define pTCNTL ((volatile unsigned long *)TCNTL)
+#define bfin_read_TCNTL() bfin_read32(TCNTL)
+#define bfin_write_TCNTL(val) bfin_write32(TCNTL,val)
+#define pTPERIOD ((volatile unsigned long *)TPERIOD)
+#define bfin_read_TPERIOD() bfin_read32(TPERIOD)
+#define bfin_write_TPERIOD(val) bfin_write32(TPERIOD,val)
+#define pTSCALE ((volatile unsigned long *)TSCALE)
+#define bfin_read_TSCALE() bfin_read32(TSCALE)
+#define bfin_write_TSCALE(val) bfin_write32(TSCALE,val)
+#define pTCOUNT ((volatile unsigned long *)TCOUNT)
+#define bfin_read_TCOUNT() bfin_read32(TCOUNT)
+#define bfin_write_TCOUNT(val) bfin_write32(TCOUNT,val)
+
+/*Debug/MP/Emulation Registers*/
+#define pDSPID ((volatile unsigned long *)DSPID)
+#define bfin_read_DSPID() bfin_read32(DSPID)
+#define bfin_write_DSPID(val) bfin_write32(DSPID,val)
+#define pDBGCTL ((volatile unsigned long *)DBGCTL)
+#define bfin_read_DBGCTL() bfin_read32(DBGCTL)
+#define bfin_write_DBGCTL(val) bfin_write32(DBGCTL,val)
+#define pDBGSTAT ((volatile unsigned long *)DBGSTAT)
+#define bfin_read_DBGSTAT() bfin_read32(DBGSTAT)
+#define bfin_write_DBGSTAT(val) bfin_write32(DBGSTAT,val)
+#define pEMUDAT ((volatile unsigned long *)EMUDAT)
+#define bfin_read_EMUDAT() bfin_read32(EMUDAT)
+#define bfin_write_EMUDAT(val) bfin_write32(EMUDAT,val)
+
+/*Trace Buffer Registers*/
+#define pTBUFCTL ((volatile unsigned long *)TBUFCTL)
+#define bfin_read_TBUFCTL() bfin_read32(TBUFCTL)
+#define bfin_write_TBUFCTL(val) bfin_write32(TBUFCTL,val)
+#define pTBUFSTAT ((volatile unsigned long *)TBUFSTAT)
+#define bfin_read_TBUFSTAT() bfin_read32(TBUFSTAT)
+#define bfin_write_TBUFSTAT(val) bfin_write32(TBUFSTAT,val)
+#define pTBUF ((volatile void **)TBUF)
+#define bfin_read_TBUF() bfin_read32(TBUF)
+#define bfin_write_TBUF(val) bfin_write32(TBUF,val)
+
+/*Watch Point Control Registers*/
+#define pWPIACTL ((volatile unsigned long *)WPIACTL)
+#define bfin_read_WPIACTL() bfin_read32(WPIACTL)
+#define bfin_write_WPIACTL(val) bfin_write32(WPIACTL,val)
+#define pWPIA0 ((volatile void **)WPIA0)
+#define bfin_read_WPIA0() bfin_read32(WPIA0)
+#define bfin_write_WPIA0(val) bfin_write32(WPIA0,val)
+#define pWPIA1 ((volatile void **)WPIA1)
+#define bfin_read_WPIA1() bfin_read32(WPIA1)
+#define bfin_write_WPIA1(val) bfin_write32(WPIA1,val)
+#define pWPIA2 ((volatile void **)WPIA2)
+#define bfin_read_WPIA2() bfin_read32(WPIA2)
+#define bfin_write_WPIA2(val) bfin_write32(WPIA2,val)
+#define pWPIA3 ((volatile void **)WPIA3)
+#define bfin_read_WPIA3() bfin_read32(WPIA3)
+#define bfin_write_WPIA3(val) bfin_write32(WPIA3,val)
+#define pWPIA4 ((volatile void **)WPIA4)
+#define bfin_read_WPIA4() bfin_read32(WPIA4)
+#define bfin_write_WPIA4(val) bfin_write32(WPIA4,val)
+#define pWPIA5 ((volatile void **)WPIA5)
+#define bfin_read_WPIA5() bfin_read32(WPIA5)
+#define bfin_write_WPIA5(val) bfin_write32(WPIA5,val)
+#define pWPIACNT0 ((volatile unsigned long *)WPIACNT0)
+#define bfin_read_WPIACNT0() bfin_read32(WPIACNT0)
+#define bfin_write_WPIACNT0(val) bfin_write32(WPIACNT0,val)
+#define pWPIACNT1 ((volatile unsigned long *)WPIACNT1)
+#define bfin_read_WPIACNT1() bfin_read32(WPIACNT1)
+#define bfin_write_WPIACNT1(val) bfin_write32(WPIACNT1,val)
+#define pWPIACNT2 ((volatile unsigned long *)WPIACNT2)
+#define bfin_read_WPIACNT2() bfin_read32(WPIACNT2)
+#define bfin_write_WPIACNT2(val) bfin_write32(WPIACNT2,val)
+#define pWPIACNT3 ((volatile unsigned long *)WPIACNT3)
+#define bfin_read_WPIACNT3() bfin_read32(WPIACNT3)
+#define bfin_write_WPIACNT3(val) bfin_write32(WPIACNT3,val)
+#define pWPIACNT4 ((volatile unsigned long *)WPIACNT4)
+#define bfin_read_WPIACNT4() bfin_read32(WPIACNT4)
+#define bfin_write_WPIACNT4(val) bfin_write32(WPIACNT4,val)
+#define pWPIACNT5 ((volatile unsigned long *)WPIACNT5)
+#define bfin_read_WPIACNT5() bfin_read32(WPIACNT5)
+#define bfin_write_WPIACNT5(val) bfin_write32(WPIACNT5,val)
+#define pWPDACTL ((volatile unsigned long *)WPDACTL)
+#define bfin_read_WPDACTL() bfin_read32(WPDACTL)
+#define bfin_write_WPDACTL(val) bfin_write32(WPDACTL,val)
+#define pWPDA0 ((volatile void **)WPDA0)
+#define bfin_read_WPDA0() bfin_read32(WPDA0)
+#define bfin_write_WPDA0(val) bfin_write32(WPDA0,val)
+#define pWPDA1 ((volatile void **)WPDA1)
+#define bfin_read_WPDA1() bfin_read32(WPDA1)
+#define bfin_write_WPDA1(val) bfin_write32(WPDA1,val)
+#define pWPDACNT0 ((volatile unsigned long *)WPDACNT0)
+#define bfin_read_WPDACNT0() bfin_read32(WPDACNT0)
+#define bfin_write_WPDACNT0(val) bfin_write32(WPDACNT0,val)
+#define pWPDACNT1 ((volatile unsigned long *)WPDACNT1)
+#define bfin_read_WPDACNT1() bfin_read32(WPDACNT1)
+#define bfin_write_WPDACNT1(val) bfin_write32(WPDACNT1,val)
+#define pWPSTAT ((volatile unsigned long *)WPSTAT)
+#define bfin_read_WPSTAT() bfin_read32(WPSTAT)
+#define bfin_write_WPSTAT(val) bfin_write32(WPSTAT,val)
+
+/*Performance Monitor Registers*/
+#define pPFCTL ((volatile unsigned long *)PFCTL)
+#define bfin_read_PFCTL() bfin_read32(PFCTL)
+#define bfin_write_PFCTL(val) bfin_write32(PFCTL,val)
+#define pPFCNTR0 ((volatile unsigned long *)PFCNTR0)
+#define bfin_read_PFCNTR0() bfin_read32(PFCNTR0)
+#define bfin_write_PFCNTR0(val) bfin_write32(PFCNTR0,val)
+#define pPFCNTR1 ((volatile unsigned long *)PFCNTR1)
+#define bfin_read_PFCNTR1() bfin_read32(PFCNTR1)
+#define bfin_write_PFCNTR1(val) bfin_write32(PFCNTR1,val)
+
+/*
+#define IPRIO 0xFFE02110
+*/
+
+#if defined(CONFIG_BFIN_ALIVE_LED)
+#define pCONFIG_BFIN_ALIVE_LED_DPORT \
+ (volatile unsigned short *)CONFIG_BFIN_ALIVE_LED_DPORT
+#define pCONFIG_BFIN_ALIVE_LED_PORT \
+ (volatile unsigned short *)CONFIG_BFIN_ALIVE_LED_PORT
+#endif
+
+#if defined(CONFIG_BFIN_IDLE_LED)
+#define pCONFIG_BFIN_IDLE_LED_DPORT \
+ (volatile unsigned short *)CONFIG_BFIN_IDLE_LED_DPORT
+#define pCONFIG_BFIN_IDLE_LED_PORT \
+ (volatile unsigned short *)CONFIG_BFIN_IDLE_LED_PORT
+#endif
+
+#endif /* _CDEF_LPBLACKFIN_H */
diff --git a/include/asm-blackfin/mach-common/context.S b/include/asm-blackfin/mach-common/context.S
new file mode 100644
index 0000000..fd0ebe1
--- /dev/null
+++ b/include/asm-blackfin/mach-common/context.S
@@ -0,0 +1,350 @@
+/*
+ * File: arch/blackfin/kernel/context.S
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Modified:
+ * Copyright 2004-2007 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/*
+ * Code to save processor context.
+ * We even save the register which are preserved by a function call
+ * - r4, r5, r6, r7, p3, p4, p5
+ */
+.macro save_context_with_interrupts
+ [--sp] = SYSCFG;
+
+ [--sp] = P0; /*orig_p0*/
+ [--sp] = R0; /*orig_r0*/
+
+ [--sp] = ( R7:0, P5:0 );
+ [--sp] = fp;
+ [--sp] = usp;
+
+ [--sp] = i0;
+ [--sp] = i1;
+ [--sp] = i2;
+ [--sp] = i3;
+
+ [--sp] = m0;
+ [--sp] = m1;
+ [--sp] = m2;
+ [--sp] = m3;
+
+ [--sp] = l0;
+ [--sp] = l1;
+ [--sp] = l2;
+ [--sp] = l3;
+
+ [--sp] = b0;
+ [--sp] = b1;
+ [--sp] = b2;
+ [--sp] = b3;
+ [--sp] = a0.x;
+ [--sp] = a0.w;
+ [--sp] = a1.x;
+ [--sp] = a1.w;
+
+ [--sp] = LC0;
+ [--sp] = LC1;
+ [--sp] = LT0;
+ [--sp] = LT1;
+ [--sp] = LB0;
+ [--sp] = LB1;
+
+ [--sp] = ASTAT;
+
+ [--sp] = r0; /* Skip reserved */
+ [--sp] = RETS;
+ r0 = RETI;
+ [--sp] = r0;
+ [--sp] = RETX;
+ [--sp] = RETN;
+ [--sp] = RETE;
+ [--sp] = SEQSTAT;
+ [--sp] = r0; /* Skip IPEND as well. */
+ /* Switch to other method of keeping interrupts disabled. */
+#ifdef CONFIG_DEBUG_HWERR
+ r0 = 0x3f;
+ sti r0;
+#else
+ cli r0;
+#endif
+ [--sp] = RETI; /*orig_pc*/
+ /* Clear all L registers. */
+ r0 = 0 (x);
+ l0 = r0;
+ l1 = r0;
+ l2 = r0;
+ l3 = r0;
+.endm
+
+.macro save_context_syscall
+ [--sp] = SYSCFG;
+
+ [--sp] = P0; /*orig_p0*/
+ [--sp] = R0; /*orig_r0*/
+ [--sp] = ( R7:0, P5:0 );
+ [--sp] = fp;
+ [--sp] = usp;
+
+ [--sp] = i0;
+ [--sp] = i1;
+ [--sp] = i2;
+ [--sp] = i3;
+
+ [--sp] = m0;
+ [--sp] = m1;
+ [--sp] = m2;
+ [--sp] = m3;
+
+ [--sp] = l0;
+ [--sp] = l1;
+ [--sp] = l2;
+ [--sp] = l3;
+
+ [--sp] = b0;
+ [--sp] = b1;
+ [--sp] = b2;
+ [--sp] = b3;
+ [--sp] = a0.x;
+ [--sp] = a0.w;
+ [--sp] = a1.x;
+ [--sp] = a1.w;
+
+ [--sp] = LC0;
+ [--sp] = LC1;
+ [--sp] = LT0;
+ [--sp] = LT1;
+ [--sp] = LB0;
+ [--sp] = LB1;
+
+ [--sp] = ASTAT;
+
+ [--sp] = r0; /* Skip reserved */
+ [--sp] = RETS;
+ r0 = RETI;
+ [--sp] = r0;
+ [--sp] = RETX;
+ [--sp] = RETN;
+ [--sp] = RETE;
+ [--sp] = SEQSTAT;
+ [--sp] = r0; /* Skip IPEND as well. */
+ [--sp] = RETI; /*orig_pc*/
+ /* Clear all L registers. */
+ r0 = 0 (x);
+ l0 = r0;
+ l1 = r0;
+ l2 = r0;
+ l3 = r0;
+.endm
+
+.macro save_context_no_interrupts
+ [--sp] = SYSCFG;
+ [--sp] = P0; /* orig_p0 */
+ [--sp] = R0; /* orig_r0 */
+ [--sp] = ( R7:0, P5:0 );
+ [--sp] = fp;
+ [--sp] = usp;
+
+ [--sp] = i0;
+ [--sp] = i1;
+ [--sp] = i2;
+ [--sp] = i3;
+
+ [--sp] = m0;
+ [--sp] = m1;
+ [--sp] = m2;
+ [--sp] = m3;
+
+ [--sp] = l0;
+ [--sp] = l1;
+ [--sp] = l2;
+ [--sp] = l3;
+
+ [--sp] = b0;
+ [--sp] = b1;
+ [--sp] = b2;
+ [--sp] = b3;
+ [--sp] = a0.x;
+ [--sp] = a0.w;
+ [--sp] = a1.x;
+ [--sp] = a1.w;
+
+ [--sp] = LC0;
+ [--sp] = LC1;
+ [--sp] = LT0;
+ [--sp] = LT1;
+ [--sp] = LB0;
+ [--sp] = LB1;
+
+ [--sp] = ASTAT;
+
+#ifdef CONFIG_KGDB
+ fp = 0(Z);
+ r1 = sp;
+ r1 += 60;
+ r1 += 60;
+ r1 += 60;
+ [--sp] = r1;
+#else
+ [--sp] = r0; /* Skip reserved */
+#endif
+ [--sp] = RETS;
+ r0 = RETI;
+ [--sp] = r0;
+ [--sp] = RETX;
+ [--sp] = RETN;
+ [--sp] = RETE;
+ [--sp] = SEQSTAT;
+#ifdef CONFIG_KGDB
+ r1.l = lo(IPEND);
+ r1.h = hi(IPEND);
+ [--sp] = r1;
+#else
+ [--sp] = r0; /* Skip IPEND as well. */
+#endif
+ [--sp] = r0; /*orig_pc*/
+ /* Clear all L registers. */
+ r0 = 0 (x);
+ l0 = r0;
+ l1 = r0;
+ l2 = r0;
+ l3 = r0;
+.endm
+
+.macro restore_context_no_interrupts
+ sp += 4; /* Skip orig_pc */
+ sp += 4; /* Skip IPEND */
+ SEQSTAT = [sp++];
+ RETE = [sp++];
+ RETN = [sp++];
+ RETX = [sp++];
+ r0 = [sp++];
+ RETI = r0; /* Restore RETI indirectly when in exception */
+ RETS = [sp++];
+
+ sp += 4; /* Skip Reserved */
+
+ ASTAT = [sp++];
+
+ LB1 = [sp++];
+ LB0 = [sp++];
+ LT1 = [sp++];
+ LT0 = [sp++];
+ LC1 = [sp++];
+ LC0 = [sp++];
+
+ a1.w = [sp++];
+ a1.x = [sp++];
+ a0.w = [sp++];
+ a0.x = [sp++];
+ b3 = [sp++];
+ b2 = [sp++];
+ b1 = [sp++];
+ b0 = [sp++];
+
+ l3 = [sp++];
+ l2 = [sp++];
+ l1 = [sp++];
+ l0 = [sp++];
+
+ m3 = [sp++];
+ m2 = [sp++];
+ m1 = [sp++];
+ m0 = [sp++];
+
+ i3 = [sp++];
+ i2 = [sp++];
+ i1 = [sp++];
+ i0 = [sp++];
+
+ sp += 4;
+ fp = [sp++];
+
+ ( R7 : 0, P5 : 0) = [ SP ++ ];
+ sp += 8; /* Skip orig_r0/orig_p0 */
+ SYSCFG = [sp++];
+.endm
+
+.macro restore_context_with_interrupts
+ sp += 4; /* Skip orig_pc */
+ sp += 4; /* Skip IPEND */
+ SEQSTAT = [sp++];
+ RETE = [sp++];
+ RETN = [sp++];
+ RETX = [sp++];
+ RETI = [sp++];
+ RETS = [sp++];
+
+ p0.h = _irq_flags;
+ p0.l = _irq_flags;
+ r0 = [p0];
+ sti r0;
+
+ sp += 4; /* Skip Reserved */
+
+ ASTAT = [sp++];
+
+ LB1 = [sp++];
+ LB0 = [sp++];
+ LT1 = [sp++];
+ LT0 = [sp++];
+ LC1 = [sp++];
+ LC0 = [sp++];
+
+ a1.w = [sp++];
+ a1.x = [sp++];
+ a0.w = [sp++];
+ a0.x = [sp++];
+ b3 = [sp++];
+ b2 = [sp++];
+ b1 = [sp++];
+ b0 = [sp++];
+
+ l3 = [sp++];
+ l2 = [sp++];
+ l1 = [sp++];
+ l0 = [sp++];
+
+ m3 = [sp++];
+ m2 = [sp++];
+ m1 = [sp++];
+ m0 = [sp++];
+
+ i3 = [sp++];
+ i2 = [sp++];
+ i1 = [sp++];
+ i0 = [sp++];
+
+ sp += 4;
+ fp = [sp++];
+
+ ( R7 : 0, P5 : 0) = [ SP ++ ];
+ sp += 8; /* Skip orig_r0/orig_p0 */
+ csync;
+ SYSCFG = [sp++];
+ csync;
+.endm
+
diff --git a/include/asm-blackfin/mach-common/def_LPBlackfin.h b/include/asm-blackfin/mach-common/def_LPBlackfin.h
new file mode 100644
index 0000000..7610352
--- /dev/null
+++ b/include/asm-blackfin/mach-common/def_LPBlackfin.h
@@ -0,0 +1,691 @@
+ /*
+ * File: include/asm-blackfin/mach-common/def_LPBlackfin.h
+ * Based on:
+ * Author: unknown
+ * COPYRIGHT 2005 Analog Devices
+ * Created: ?
+ * Description:
+ *
+ * Modified:
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.
+ * If not, write to the Free Software Foundation,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+/* LP Blackfin CORE REGISTER BIT & ADDRESS DEFINITIONS FOR ADSP-BF532/33 */
+
+#ifndef _DEF_LPBLACKFIN_H
+#define _DEF_LPBLACKFIN_H
+
+#include <asm/mach/anomaly.h>
+
+/*#if !defined(__ADSPLPBLACKFIN__)
+#warning def_LPBlackfin.h should only be included for 532 compatible chips.
+#endif
+*/
+
+#define MK_BMSK_(x) (1<<x)
+
+#if defined(ANOMALY_05000198)
+
+#define bfin_read16(addr) ({ unsigned __v; \
+ __asm__ __volatile__ ("NOP;\n\t"\
+ "%0 = w[%1] (z);\n\t"\
+ : "=d"(__v) : "a"(addr)); (unsigned short)__v; })
+
+#define bfin_read32(addr) ({ unsigned __v; \
+ __asm__ __volatile__ ("NOP;\n\t"\
+ "%0 = [%1];\n\t"\
+ : "=d"(__v) : "a"(addr)); __v; })
+
+#define bfin_write16(addr,val) ({\
+ __asm__ __volatile__ ("NOP;\n\t"\
+ "w[%0] = %1;\n\t"\
+ : : "a"(addr) , "d"(val) : "memory");})
+
+#define bfin_write32(addr,val) ({\
+ __asm__ __volatile__ ("NOP;\n\t"\
+ "[%0] = %1;\n\t"\
+ : : "a"(addr) , "d"(val) : "memory");})
+
+#else
+
+#define bfin_read16(addr) ({ unsigned __v; \
+ __asm__ __volatile__ (\
+ "%0 = w[%1] (z);\n\t"\
+ : "=d"(__v) : "a"(addr)); (unsigned short)__v; })
+
+#define bfin_read32(addr) ({ unsigned __v; \
+ __asm__ __volatile__ (\
+ "%0 = [%1];\n\t"\
+ : "=d"(__v) : "a"(addr)); __v; })
+
+#define bfin_write16(addr,val) ({\
+ __asm__ __volatile__ (\
+ "w[%0] = %1;\n\t"\
+ : : "a"(addr) , "d"(val) : "memory");})
+
+#define bfin_write32(addr,val) ({\
+ __asm__ __volatile__ (\
+ "[%0] = %1;\n\t"\
+ : : "a"(addr) , "d"(val) : "memory");})
+
+#endif
+
+/**************************************************
+ * System Register Bits
+ **************************************************/
+
+/**************************************************
+ * ASTAT register
+ **************************************************/
+
+/* definitions of ASTAT bit positions*/
+
+/*Result of last ALU0 or shifter operation is zero*/
+#define ASTAT_AZ_P 0x00000000
+/*Result of last ALU0 or shifter operation is negative*/
+#define ASTAT_AN_P 0x00000001
+/*Condition Code, used for holding comparison results*/
+#define ASTAT_CC_P 0x00000005
+/*Quotient Bit*/
+#define ASTAT_AQ_P 0x00000006
+/*Rounding mode, set for biased, clear for unbiased*/
+#define ASTAT_RND_MOD_P 0x00000008
+/*Result of last ALU0 operation generated a carry*/
+#define ASTAT_AC0_P 0x0000000C
+/*Result of last ALU0 operation generated a carry*/
+#define ASTAT_AC0_COPY_P 0x00000002
+/*Result of last ALU1 operation generated a carry*/
+#define ASTAT_AC1_P 0x0000000D
+/*Result of last ALU0 or MAC0 operation overflowed, sticky for MAC*/
+#define ASTAT_AV0_P 0x00000010
+/*Sticky version of ASTAT_AV0 */
+#define ASTAT_AV0S_P 0x00000011
+/*Result of last MAC1 operation overflowed, sticky for MAC*/
+#define ASTAT_AV1_P 0x00000012
+/*Sticky version of ASTAT_AV1 */
+#define ASTAT_AV1S_P 0x00000013
+/*Result of last ALU0 or MAC0 operation overflowed*/
+#define ASTAT_V_P 0x00000018
+/*Result of last ALU0 or MAC0 operation overflowed*/
+#define ASTAT_V_COPY_P 0x00000003
+/*Sticky version of ASTAT_V*/
+#define ASTAT_VS_P 0x00000019
+
+/* Masks */
+
+/*Result of last ALU0 or shifter operation is zero*/
+#define ASTAT_AZ MK_BMSK_(ASTAT_AZ_P)
+/*Result of last ALU0 or shifter operation is negative*/
+#define ASTAT_AN MK_BMSK_(ASTAT_AN_P)
+/*Result of last ALU0 operation generated a carry*/
+#define ASTAT_AC0 MK_BMSK_(ASTAT_AC0_P)
+/*Result of last ALU0 operation generated a carry*/
+#define ASTAT_AC0_COPY MK_BMSK_(ASTAT_AC0_COPY_P)
+/*Result of last ALU0 operation generated a carry*/
+#define ASTAT_AC1 MK_BMSK_(ASTAT_AC1_P)
+/*Result of last ALU0 or MAC0 operation overflowed, sticky for MAC*/
+#define ASTAT_AV0 MK_BMSK_(ASTAT_AV0_P)
+/*Result of last MAC1 operation overflowed, sticky for MAC*/
+#define ASTAT_AV1 MK_BMSK_(ASTAT_AV1_P)
+/*Condition Code, used for holding comparison results*/
+#define ASTAT_CC MK_BMSK_(ASTAT_CC_P)
+/*Quotient Bit*/
+#define ASTAT_AQ MK_BMSK_(ASTAT_AQ_P)
+/*Rounding mode, set for biased, clear for unbiased*/
+#define ASTAT_RND_MOD MK_BMSK_(ASTAT_RND_MOD_P)
+/*Overflow Bit*/
+#define ASTAT_V MK_BMSK_(ASTAT_V_P)
+/*Overflow Bit*/
+#define ASTAT_V_COPY MK_BMSK_(ASTAT_V_COPY_P)
+
+/**************************************************
+ * SEQSTAT register
+ **************************************************/
+
+/* Bit Positions */
+#define SEQSTAT_EXCAUSE0_P 0x00000000 /* Last exception cause bit 0 */
+#define SEQSTAT_EXCAUSE1_P 0x00000001 /* Last exception cause bit 1 */
+#define SEQSTAT_EXCAUSE2_P 0x00000002 /* Last exception cause bit 2 */
+#define SEQSTAT_EXCAUSE3_P 0x00000003 /* Last exception cause bit 3 */
+#define SEQSTAT_EXCAUSE4_P 0x00000004 /* Last exception cause bit 4 */
+#define SEQSTAT_EXCAUSE5_P 0x00000005 /* Last exception cause bit 5 */
+#define SEQSTAT_IDLE_REQ_P 0x0000000C /* Pending idle mode request,
+ * set by IDLE instruction.
+ */
+#define SEQSTAT_SFTRESET_P 0x0000000D /* Indicates whether the last
+ * reset was a software reset
+ * (=1)
+ */
+#define SEQSTAT_HWERRCAUSE0_P 0x0000000E /* Last hw error cause bit 0 */
+#define SEQSTAT_HWERRCAUSE1_P 0x0000000F /* Last hw error cause bit 1 */
+#define SEQSTAT_HWERRCAUSE2_P 0x00000010 /* Last hw error cause bit 2 */
+#define SEQSTAT_HWERRCAUSE3_P 0x00000011 /* Last hw error cause bit 3 */
+#define SEQSTAT_HWERRCAUSE4_P 0x00000012 /* Last hw error cause bit 4 */
+/* Masks */
+/* Exception cause */
+#define SEQSTAT_EXCAUSE (MK_BMSK_(SEQSTAT_EXCAUSE0_P) | \
+ MK_BMSK_(SEQSTAT_EXCAUSE1_P) | \
+ MK_BMSK_(SEQSTAT_EXCAUSE2_P) | \
+ MK_BMSK_(SEQSTAT_EXCAUSE3_P) | \
+ MK_BMSK_(SEQSTAT_EXCAUSE4_P) | \
+ MK_BMSK_(SEQSTAT_EXCAUSE5_P) | \
+ 0)
+
+/* Indicates whether the last reset was a software reset (=1) */
+#define SEQSTAT_SFTRESET (MK_BMSK_(SEQSTAT_SFTRESET_P))
+
+/* Last hw error cause */
+#define SEQSTAT_HWERRCAUSE (MK_BMSK_(SEQSTAT_HWERRCAUSE0_P) | \
+ MK_BMSK_(SEQSTAT_HWERRCAUSE1_P) | \
+ MK_BMSK_(SEQSTAT_HWERRCAUSE2_P) | \
+ MK_BMSK_(SEQSTAT_HWERRCAUSE3_P) | \
+ MK_BMSK_(SEQSTAT_HWERRCAUSE4_P) | \
+ 0)
+
+/* Translate bits to something useful */
+
+/* Last hw error cause */
+#define SEQSTAT_HWERRCAUSE_SHIFT (14)
+#define SEQSTAT_HWERRCAUSE_SYSTEM_MMR (0x02 << SEQSTAT_HWERRCAUSE_SHIFT)
+#define SEQSTAT_HWERRCAUSE_EXTERN_ADDR (0x03 << SEQSTAT_HWERRCAUSE_SHIFT)
+#define SEQSTAT_HWERRCAUSE_PERF_FLOW (0x12 << SEQSTAT_HWERRCAUSE_SHIFT)
+#define SEQSTAT_HWERRCAUSE_RAISE_5 (0x18 << SEQSTAT_HWERRCAUSE_SHIFT)
+
+/**************************************************
+ * SYSCFG register
+ **************************************************/
+
+/* Bit Positions */
+#define SYSCFG_SSSTEP_P 0x00000000 /* Supervisor single step, when
+ * set it forces an exception
+ * for each instruction executed
+ */
+#define SYSCFG_CCEN_P 0x00000001 /* Enable cycle counter (=1) */
+#define SYSCFG_SNEN_P 0x00000002 /* Self nesting Interrupt Enable */
+
+/* Masks */
+
+/* Supervisor single step, when set it forces an exception for each
+ *instruction executed
+ */
+#define SYSCFG_SSSTEP MK_BMSK_(SYSCFG_SSSTEP_P )
+/* Enable cycle counter (=1) */
+#define SYSCFG_CCEN MK_BMSK_(SYSCFG_CCEN_P )
+/* Self Nesting Interrupt Enable */
+#define SYSCFG_SNEN MK_BMSK_(SYSCFG_SNEN_P)
+/* Backward-compatibility for typos in prior releases */
+#define SYSCFG_SSSSTEP SYSCFG_SSSTEP
+#define SYSCFG_CCCEN SYSCFG_CCEN
+
+/****************************************************
+ * Core MMR Register Map
+ ****************************************************/
+
+/* Data Cache & SRAM Memory (0xFFE00000 - 0xFFE00404) */
+
+#define SRAM_BASE_ADDRESS 0xFFE00000 /* SRAM Base Address Register */
+#define DMEM_CONTROL 0xFFE00004 /* Data memory control */
+#define DCPLB_STATUS 0xFFE00008 /* Data Cache Programmable Look-Aside
+ * Buffer Status
+ */
+#define DCPLB_FAULT_STATUS 0xFFE00008 /* "" (older define) */
+#define DCPLB_FAULT_ADDR 0xFFE0000C /* Data Cache Programmable Look-Aside
+ * Buffer Fault Address
+ */
+#define DCPLB_ADDR0 0xFFE00100 /* Data Cache Protection Lookaside
+ * Buffer 0
+ */
+#define DCPLB_ADDR1 0xFFE00104 /* Data Cache Protection Lookaside
+ * Buffer 1
+ */
+#define DCPLB_ADDR2 0xFFE00108 /* Data Cache Protection Lookaside
+ * Buffer 2
+ */
+#define DCPLB_ADDR3 0xFFE0010C /* Data Cacheability Protection
+ * Lookaside Buffer 3
+ */
+#define DCPLB_ADDR4 0xFFE00110 /* Data Cacheability Protection
+ * Lookaside Buffer 4
+ */
+#define DCPLB_ADDR5 0xFFE00114 /* Data Cacheability Protection
+ * Lookaside Buffer 5
+ */
+#define DCPLB_ADDR6 0xFFE00118 /* Data Cacheability Protection
+ * Lookaside Buffer 6
+ */
+#define DCPLB_ADDR7 0xFFE0011C /* Data Cacheability Protection
+ * Lookaside Buffer 7
+ */
+#define DCPLB_ADDR8 0xFFE00120 /* Data Cacheability Protection
+ * Lookaside Buffer 8
+ */
+#define DCPLB_ADDR9 0xFFE00124 /* Data Cacheability Protection
+ * Lookaside Buffer 9
+ */
+#define DCPLB_ADDR10 0xFFE00128 /* Data Cacheability Protection
+ * Lookaside Buffer 10
+ */
+#define DCPLB_ADDR11 0xFFE0012C /* Data Cacheability Protection
+ * Lookaside Buffer 11
+ */
+#define DCPLB_ADDR12 0xFFE00130 /* Data Cacheability Protection
+ * Lookaside Buffer 12
+ */
+#define DCPLB_ADDR13 0xFFE00134 /* Data Cacheability Protection
+ * Lookaside Buffer 13
+ */
+#define DCPLB_ADDR14 0xFFE00138 /* Data Cacheability Protection
+ * Lookaside Buffer 14
+ */
+#define DCPLB_ADDR15 0xFFE0013C /* Data Cacheability Protection
+ * Lookaside Buffer 15
+ */
+#define DCPLB_DATA0 0xFFE00200 /* Data Cache 0 Status */
+#define DCPLB_DATA1 0xFFE00204 /* Data Cache 1 Status */
+#define DCPLB_DATA2 0xFFE00208 /* Data Cache 2 Status */
+#define DCPLB_DATA3 0xFFE0020C /* Data Cache 3 Status */
+#define DCPLB_DATA4 0xFFE00210 /* Data Cache 4 Status */
+#define DCPLB_DATA5 0xFFE00214 /* Data Cache 5 Status */
+#define DCPLB_DATA6 0xFFE00218 /* Data Cache 6 Status */
+#define DCPLB_DATA7 0xFFE0021C /* Data Cache 7 Status */
+#define DCPLB_DATA8 0xFFE00220 /* Data Cache 8 Status */
+#define DCPLB_DATA9 0xFFE00224 /* Data Cache 9 Status */
+#define DCPLB_DATA10 0xFFE00228 /* Data Cache 10 Status */
+#define DCPLB_DATA11 0xFFE0022C /* Data Cache 11 Status */
+#define DCPLB_DATA12 0xFFE00230 /* Data Cache 12 Status */
+#define DCPLB_DATA13 0xFFE00234 /* Data Cache 13 Status */
+#define DCPLB_DATA14 0xFFE00238 /* Data Cache 14 Status */
+#define DCPLB_DATA15 0xFFE0023C /* Data Cache 15 Status */
+#define DCPLB_DATA16 0xFFE00240 /* Extra Dummy entry */
+
+#define DTEST_COMMAND 0xFFE00300 /* Data Test Command Register */
+#define DTEST_DATA0 0xFFE00400 /* Data Test Data Register */
+#define DTEST_DATA1 0xFFE00404 /* Data Test Data Register */
+
+/* Instruction Cache & SRAM Memory (0xFFE01004 - 0xFFE01404) */
+
+#define IMEM_CONTROL 0xFFE01004 /* Instruction Memory Control */
+#define ICPLB_STATUS 0xFFE01008 /* Instruction Cache miss status */
+#define CODE_FAULT_STATUS 0xFFE01008 /* "" (older define) */
+#define ICPLB_FAULT_ADDR 0xFFE0100C /* Instruction Cache miss address */
+#define CODE_FAULT_ADDR 0xFFE0100C /* "" (older define) */
+#define ICPLB_ADDR0 0xFFE01100 /* Instruction Cacheability
+ * Protection Lookaside Buffer 0
+ */
+#define ICPLB_ADDR1 0xFFE01104 /* Instruction Cacheability
+ * Protection Lookaside Buffer 1
+ */
+#define ICPLB_ADDR2 0xFFE01108 /* Instruction Cacheability
+ * Protection Lookaside Buffer 2
+ */
+#define ICPLB_ADDR3 0xFFE0110C /* Instruction Cacheability
+ * Protection Lookaside Buffer 3
+ */
+#define ICPLB_ADDR4 0xFFE01110 /* Instruction Cacheability
+ * Protection Lookaside Buffer 4
+ */
+#define ICPLB_ADDR5 0xFFE01114 /* Instruction Cacheability
+ * Protection Lookaside Buffer 5
+ */
+#define ICPLB_ADDR6 0xFFE01118 /* Instruction Cacheability
+ * Protection Lookaside Buffer 6
+ */
+#define ICPLB_ADDR7 0xFFE0111C /* Instruction Cacheability
+ * Protection Lookaside Buffer 7
+ */
+#define ICPLB_ADDR8 0xFFE01120 /* Instruction Cacheability
+ * Protection Lookaside Buffer 8
+ */
+#define ICPLB_ADDR9 0xFFE01124 /* Instruction Cacheability
+ * Protection Lookaside Buffer 9
+ */
+#define ICPLB_ADDR10 0xFFE01128 /* Instruction Cacheability
+ * Protection Lookaside Buffer 10
+ */
+#define ICPLB_ADDR11 0xFFE0112C /* Instruction Cacheability
+ * Protection Lookaside Buffer 11
+ */
+#define ICPLB_ADDR12 0xFFE01130 /* Instruction Cacheability
+ * Protection Lookaside Buffer 12
+ */
+#define ICPLB_ADDR13 0xFFE01134 /* Instruction Cacheability
+ * Protection Lookaside Buffer 13
+ */
+#define ICPLB_ADDR14 0xFFE01138 /* Instruction Cacheability
+ * Protection Lookaside Buffer 14
+ */
+#define ICPLB_ADDR15 0xFFE0113C /* Instruction Cacheability
+ * Protection Lookaside Buffer 15
+ */
+#define ICPLB_DATA0 0xFFE01200 /* Instruction Cache 0 Status */
+#define ICPLB_DATA1 0xFFE01204 /* Instruction Cache 1 Status */
+#define ICPLB_DATA2 0xFFE01208 /* Instruction Cache 2 Status */
+#define ICPLB_DATA3 0xFFE0120C /* Instruction Cache 3 Status */
+#define ICPLB_DATA4 0xFFE01210 /* Instruction Cache 4 Status */
+#define ICPLB_DATA5 0xFFE01214 /* Instruction Cache 5 Status */
+#define ICPLB_DATA6 0xFFE01218 /* Instruction Cache 6 Status */
+#define ICPLB_DATA7 0xFFE0121C /* Instruction Cache 7 Status */
+#define ICPLB_DATA8 0xFFE01220 /* Instruction Cache 8 Status */
+#define ICPLB_DATA9 0xFFE01224 /* Instruction Cache 9 Status */
+#define ICPLB_DATA10 0xFFE01228 /* Instruction Cache 10 Status */
+#define ICPLB_DATA11 0xFFE0122C /* Instruction Cache 11 Status */
+#define ICPLB_DATA12 0xFFE01230 /* Instruction Cache 12 Status */
+#define ICPLB_DATA13 0xFFE01234 /* Instruction Cache 13 Status */
+#define ICPLB_DATA14 0xFFE01238 /* Instruction Cache 14 Status */
+#define ICPLB_DATA15 0xFFE0123C /* Instruction Cache 15 Status */
+#define ITEST_COMMAND 0xFFE01300 /* Instruction Test Command Register */
+#define ITEST_DATA0 0xFFE01400 /* Instruction Test Data Register */
+#define ITEST_DATA1 0xFFE01404 /* Instruction Test Data Register */
+
+/* Event/Interrupt Controller Registers (0xFFE02000 - 0xFFE02110) */
+
+#define EVT0 0xFFE02000 /* Event Vector 0 ESR Address */
+#define EVT1 0xFFE02004 /* Event Vector 1 ESR Address */
+#define EVT2 0xFFE02008 /* Event Vector 2 ESR Address */
+#define EVT3 0xFFE0200C /* Event Vector 3 ESR Address */
+#define EVT4 0xFFE02010 /* Event Vector 4 ESR Address */
+#define EVT5 0xFFE02014 /* Event Vector 5 ESR Address */
+#define EVT6 0xFFE02018 /* Event Vector 6 ESR Address */
+#define EVT7 0xFFE0201C /* Event Vector 7 ESR Address */
+#define EVT8 0xFFE02020 /* Event Vector 8 ESR Address */
+#define EVT9 0xFFE02024 /* Event Vector 9 ESR Address */
+#define EVT10 0xFFE02028 /* Event Vector 10 ESR Address */
+#define EVT11 0xFFE0202C /* Event Vector 11 ESR Address */
+#define EVT12 0xFFE02030 /* Event Vector 12 ESR Address */
+#define EVT13 0xFFE02034 /* Event Vector 13 ESR Address */
+#define EVT14 0xFFE02038 /* Event Vector 14 ESR Address */
+#define EVT15 0xFFE0203C /* Event Vector 15 ESR Address */
+#define IMASK 0xFFE02104 /* Interrupt Mask Register */
+#define IPEND 0xFFE02108 /* Interrupt Pending Register */
+#define ILAT 0xFFE0210C /* Interrupt Latch Register */
+#define IPRIO 0xFFE02110 /* Core Interrupt Priority Register */
+
+/* Core Timer Registers (0xFFE03000 - 0xFFE0300C) */
+
+#define TCNTL 0xFFE03000 /* Core Timer Control Register */
+#define TPERIOD 0xFFE03004 /* Core Timer Period Register */
+#define TSCALE 0xFFE03008 /* Core Timer Scale Register */
+#define TCOUNT 0xFFE0300C /* Core Timer Count Register */
+
+/* Debug/MP/Emulation Registers (0xFFE05000 - 0xFFE05008) */
+#define DSPID 0xFFE05000 /* DSP Processor ID Register for
+ * MP implementations
+ */
+
+#define DBGSTAT 0xFFE05008 /* Debug Status Register */
+
+/* Trace Buffer Registers (0xFFE06000 - 0xFFE06100) */
+
+#define TBUFCTL 0xFFE06000 /* Trace Buffer Control Register */
+#define TBUFSTAT 0xFFE06004 /* Trace Buffer Status Register */
+#define TBUF 0xFFE06100 /* Trace Buffer */
+
+/* Watchpoint Control Registers (0xFFE07000 - 0xFFE07200) */
+
+/* Watchpoint Instruction Address Control Register */
+#define WPIACTL 0xFFE07000
+/* Watchpoint Instruction Address Register 0 */
+#define WPIA0 0xFFE07040
+/* Watchpoint Instruction Address Register 1 */
+#define WPIA1 0xFFE07044
+/* Watchpoint Instruction Address Register 2 */
+#define WPIA2 0xFFE07048
+/* Watchpoint Instruction Address Register 3 */
+#define WPIA3 0xFFE0704C
+/* Watchpoint Instruction Address Register 4 */
+#define WPIA4 0xFFE07050
+/* Watchpoint Instruction Address Register 5 */
+#define WPIA5 0xFFE07054
+/* Watchpoint Instruction Address Count Register 0 */
+#define WPIACNT0 0xFFE07080
+/* Watchpoint Instruction Address Count Register 1 */
+#define WPIACNT1 0xFFE07084
+/* Watchpoint Instruction Address Count Register 2 */
+#define WPIACNT2 0xFFE07088
+/* Watchpoint Instruction Address Count Register 3 */
+#define WPIACNT3 0xFFE0708C
+/* Watchpoint Instruction Address Count Register 4 */
+#define WPIACNT4 0xFFE07090
+/* Watchpoint Instruction Address Count Register 5 */
+#define WPIACNT5 0xFFE07094
+/* Watchpoint Data Address Control Register */
+#define WPDACTL 0xFFE07100
+/* Watchpoint Data Address Register 0 */
+#define WPDA0 0xFFE07140
+/* Watchpoint Data Address Register 1 */
+#define WPDA1 0xFFE07144
+/* Watchpoint Data Address Count Value Register 0 */
+#define WPDACNT0 0xFFE07180
+/* Watchpoint Data Address Count Value Register 1 */
+#define WPDACNT1 0xFFE07184
+/* Watchpoint Status Register */
+#define WPSTAT 0xFFE07200
+
+/* Performance Monitor Registers (0xFFE08000 - 0xFFE08104) */
+
+/* Performance Monitor Control Register */
+#define PFCTL 0xFFE08000
+/* Performance Monitor Counter Register 0 */
+#define PFCNTR0 0xFFE08100
+/* Performance Monitor Counter Register 1 */
+#define PFCNTR1 0xFFE08104
+
+/****************************************************
+ * Core MMR Register Bits
+ ****************************************************/
+
+/**************************************************
+ * EVT registers (ILAT, IMASK, and IPEND).
+ **************************************************/
+
+/* Bit Positions */
+#define EVT_EMU_P 0x00000000 /* Emulator interrupt bit position */
+#define EVT_RST_P 0x00000001 /* Reset interrupt bit position */
+#define EVT_NMI_P 0x00000002 /* Non Maskable interrupt bit position */
+#define EVT_EVX_P 0x00000003 /* Exception bit position */
+#define EVT_IRPTEN_P 0x00000004 /* Global interrupt enable bit position */
+#define EVT_IVHW_P 0x00000005 /* Hardware Error interrupt bit position */
+#define EVT_IVTMR_P 0x00000006 /* Timer interrupt bit position */
+#define EVT_IVG7_P 0x00000007 /* IVG7 interrupt bit position */
+#define EVT_IVG8_P 0x00000008 /* IVG8 interrupt bit position */
+#define EVT_IVG9_P 0x00000009 /* IVG9 interrupt bit position */
+#define EVT_IVG10_P 0x0000000a /* IVG10 interrupt bit position */
+#define EVT_IVG11_P 0x0000000b /* IVG11 interrupt bit position */
+#define EVT_IVG12_P 0x0000000c /* IVG12 interrupt bit position */
+#define EVT_IVG13_P 0x0000000d /* IVG13 interrupt bit position */
+#define EVT_IVG14_P 0x0000000e /* IVG14 interrupt bit position */
+#define EVT_IVG15_P 0x0000000f /* IVG15 interrupt bit position */
+
+/* Masks */
+#define EVT_EMU MK_BMSK_(EVT_EMU_P ) /* Emulator interrupt mask */
+#define EVT_RST MK_BMSK_(EVT_RST_P ) /* Reset interrupt mask */
+#define EVT_NMI MK_BMSK_(EVT_NMI_P ) /* Non Maskable interrupt mask */
+#define EVT_EVX MK_BMSK_(EVT_EVX_P ) /* Exception mask */
+#define EVT_IRPTEN MK_BMSK_(EVT_IRPTEN_P) /* Global interrupt enable mask */
+#define EVT_IVHW MK_BMSK_(EVT_IVHW_P ) /* Hardware Error interrupt mask */
+#define EVT_IVTMR MK_BMSK_(EVT_IVTMR_P ) /* Timer interrupt mask */
+#define EVT_IVG7 MK_BMSK_(EVT_IVG7_P ) /* IVG7 interrupt mask */
+#define EVT_IVG8 MK_BMSK_(EVT_IVG8_P ) /* IVG8 interrupt mask */
+#define EVT_IVG9 MK_BMSK_(EVT_IVG9_P ) /* IVG9 interrupt mask */
+#define EVT_IVG10 MK_BMSK_(EVT_IVG10_P ) /* IVG10 interrupt mask */
+#define EVT_IVG11 MK_BMSK_(EVT_IVG11_P ) /* IVG11 interrupt mask */
+#define EVT_IVG12 MK_BMSK_(EVT_IVG12_P ) /* IVG12 interrupt mask */
+#define EVT_IVG13 MK_BMSK_(EVT_IVG13_P ) /* IVG13 interrupt mask */
+#define EVT_IVG14 MK_BMSK_(EVT_IVG14_P ) /* IVG14 interrupt mask */
+#define EVT_IVG15 MK_BMSK_(EVT_IVG15_P ) /* IVG15 interrupt mask */
+
+/**************************************************
+ * DMEM_CONTROL Register
+ **************************************************/
+/* Bit Positions */
+#define ENDM_P 0x00 /* (doesn't really exist) Enable
+ *Data Memory L1
+ */
+#define DMCTL_ENDM_P ENDM_P /* "" (older define) */
+
+#define ENDCPLB_P 0x01 /* Enable DCPLBS */
+#define DMCTL_ENDCPLB_P ENDCPLB_P /* "" (older define) */
+#define DMC0_P 0x02 /* L1 Data Memory Configure bit 0 */
+#define DMCTL_DMC0_P DMC0_P /* "" (older define) */
+#define DMC1_P 0x03 /* L1 Data Memory Configure bit 1 */
+#define DMCTL_DMC1_P DMC1_P /* "" (older define) */
+#define DCBS_P 0x04 /* L1 Data Cache Bank Select */
+#define PORT_PREF0_P 0x12 /* DAG0 Port Preference */
+#define PORT_PREF1_P 0x13 /* DAG1 Port Preference */
+
+/* Masks */
+#define ENDM 0x00000001 /* (doesn't really exist) Enable
+ * Data Memory L1
+ */
+#define ENDCPLB 0x00000002 /* Enable DCPLB */
+#define ASRAM_BSRAM 0x00000000
+#define ACACHE_BSRAM 0x00000008
+#define ACACHE_BCACHE 0x0000000C
+#define DCBS 0x00000010 /* L1 Data Cache Bank Select */
+#define PORT_PREF0 0x00001000 /* DAG0 Port Preference */
+#define PORT_PREF1 0x00002000 /* DAG1 Port Preference */
+
+/* IMEM_CONTROL Register */
+/* Bit Positions */
+#define ENIM_P 0x00 /* Enable L1 Code Memory */
+#define IMCTL_ENIM_P 0x00 /* "" (older define) */
+#define ENICPLB_P 0x01 /* Enable ICPLB */
+#define IMCTL_ENICPLB_P 0x01 /* "" (older define) */
+#define IMC_P 0x02 /* Enable */
+#define IMCTL_IMC_P 0x02 /* Configure L1 code memory as
+ * cache (0=SRAM)
+ */
+#define ILOC0_P 0x03 /* Lock Way 0 */
+#define ILOC1_P 0x04 /* Lock Way 1 */
+#define ILOC2_P 0x05 /* Lock Way 2 */
+#define ILOC3_P 0x06 /* Lock Way 3 */
+#define LRUPRIORST_P 0x0D /* Least Recently Used Replacement
+ * Priority
+ */
+/* Masks */
+#define ENIM 0x00000001 /* Enable L1 Code Memory */
+#define ENICPLB 0x00000002 /* Enable ICPLB */
+#define IMC 0x00000004 /* Configure L1 code memory as
+ * cache (0=SRAM)
+ */
+#define ILOC0 0x00000008 /* Lock Way 0 */
+#define ILOC1 0x00000010 /* Lock Way 1 */
+#define ILOC2 0x00000020 /* Lock Way 2 */
+#define ILOC3 0x00000040 /* Lock Way 3 */
+#define LRUPRIORST 0x00002000 /* Least Recently Used Replacement
+ * Priority
+ */
+
+/* TCNTL Masks */
+#define TMPWR 0x00000001 /* Timer Low Power Control,
+ * 0=low power mode, 1=active state
+ */
+#define TMREN 0x00000002 /* Timer enable, 0=disable, 1=enable */
+#define TAUTORLD 0x00000004 /* Timer auto reload */
+#define TINT 0x00000008 /* Timer generated interrupt 0=no
+ * interrupt has been generated,
+ * 1=interrupt has been generated
+ * (sticky)
+ */
+
+/* DCPLB_DATA and ICPLB_DATA Registers */
+/* Bit Positions */
+#define CPLB_VALID_P 0x00000000 /* 0=invalid entry, 1=valid entry */
+#define CPLB_LOCK_P 0x00000001 /* 0=entry may be replaced, 1=entry
+ * locked
+ */
+#define CPLB_USER_RD_P 0x00000002 /* 0=no read access, 1=read access
+ * allowed (user mode)
+ */
+/* Masks */
+#define CPLB_VALID 0x00000001 /* 0=invalid entry, 1=valid entry */
+#define CPLB_LOCK 0x00000002 /* 0=entry may be replaced, 1=entry
+ * locked
+ */
+#define CPLB_USER_RD 0x00000004 /* 0=no read access, 1=read access
+ * allowed (user mode)
+ */
+#define PAGE_SIZE_1KB 0x00000000 /* 1 KB page size */
+#define PAGE_SIZE_4KB 0x00010000 /* 4 KB page size */
+#define PAGE_SIZE_1MB 0x00020000 /* 1 MB page size */
+#define PAGE_SIZE_4MB 0x00030000 /* 4 MB page size */
+#define CPLB_L1SRAM 0x00000020 /* 0=SRAM mapped in L1, 0=SRAM not
+ * mapped to L1
+ */
+#define CPLB_PORTPRIO 0x00000200 /* 0=low priority port, 1= high
+ * priority port
+ */
+#define CPLB_L1_CHBL 0x00001000 /* 0=non-cacheable in L1, 1=cacheable
+ * in L1
+ */
+/* ICPLB_DATA only */
+#define CPLB_LRUPRIO 0x00000100 /* 0=can be replaced by any line,
+ * 1=priority for non-replacement
+ */
+/* DCPLB_DATA only */
+#define CPLB_USER_WR 0x00000008 /* 0=no write access, 0=write
+ * access allowed (user mode)
+ */
+#define CPLB_SUPV_WR 0x00000010 /* 0=no write access, 0=write
+ * access allowed (supervisor mode)
+ */
+#define CPLB_DIRTY 0x00000080 /* 1=dirty, 0=clean */
+#define CPLB_L1_AOW 0x00008000 /* 0=do not allocate cache lines on
+ * write-through writes,
+ * 1= allocate cache lines on
+ * write-through writes.
+ */
+#define CPLB_WT 0x00004000 /* 0=write-back, 1=write-through */
+
+/* TBUFCTL Masks */
+#define TBUFPWR 0x0001
+#define TBUFEN 0x0002
+#define TBUFOVF 0x0004
+#define TBUFCMPLP_SINGLE 0x0008
+#define TBUFCMPLP_DOUBLE 0x0010
+#define TBUFCMPLP (TBUFCMPLP_SINGLE | TBUFCMPLP_DOUBLE)
+
+/* TBUFSTAT Masks */
+#define TBUFCNT 0x001F
+
+/* ITEST_COMMAND and DTEST_COMMAND Registers */
+/* Masks */
+#define TEST_READ 0x00000000 /* Read Access */
+#define TEST_WRITE 0x00000002 /* Write Access */
+#define TEST_TAG 0x00000000 /* Access TAG */
+#define TEST_DATA 0x00000004 /* Access DATA */
+#define TEST_DW0 0x00000000 /* Select Double Word 0 */
+#define TEST_DW1 0x00000008 /* Select Double Word 1 */
+#define TEST_DW2 0x00000010 /* Select Double Word 2 */
+#define TEST_DW3 0x00000018 /* Select Double Word 3 */
+#define TEST_MB0 0x00000000 /* Select Mini-Bank 0 */
+#define TEST_MB1 0x00010000 /* Select Mini-Bank 1 */
+#define TEST_MB2 0x00020000 /* Select Mini-Bank 2 */
+#define TEST_MB3 0x00030000 /* Select Mini-Bank 3 */
+#define TEST_SET(x) ((x << 5) & 0x03E0) /* Set Index 0->31 */
+#define TEST_WAY0 0x00000000 /* Access Way0 */
+#define TEST_WAY1 0x04000000 /* Access Way1 */
+/* ITEST_COMMAND only */
+#define TEST_WAY2 0x08000000 /* Access Way2 */
+#define TEST_WAY3 0x0C000000 /* Access Way3 */
+/* DTEST_COMMAND only */
+#define TEST_BNKSELA 0x00000000 /* Access SuperBank A */
+#define TEST_BNKSELB 0x00800000 /* Access SuperBank B */
+
+#endif /* _DEF_LPBLACKFIN_H */
diff --git a/include/asm-blackfin/macros.h b/include/asm-blackfin/macros.h
new file mode 100644
index 0000000..c0c04a2
--- /dev/null
+++ b/include/asm-blackfin/macros.h
@@ -0,0 +1,95 @@
+/************************************************************************
+ *
+ * macros.h
+ *
+ * (c) Copyright 2001-2003 Analog Devices, Inc. All rights reserved.
+ *
+ ************************************************************************/
+
+/* Defines various assembly macros. */
+
+#ifndef _MACROS_H
+#define _MACROS_H
+
+#define LO(con32) ((con32) & 0xFFFF)
+#define lo(con32) ((con32) & 0xFFFF)
+#define HI(con32) (((con32) >> 16) & 0xFFFF)
+#define hi(con32) (((con32) >> 16) & 0xFFFF)
+
+/*
+ * Set the corresponding bits in a System Register (SR);
+ * All bits set in "mask" will be set in the system register
+ * specified by "sys_reg" bitset_SR(sys_reg, mask), where
+ * sys_reg is the system register and mask are the bits to be set.
+ */
+#define bitset_SR(sys_reg, mask)\
+ [--SP] = (R7:6);\
+ r7 = sys_reg;\
+ r6.l = (mask) & 0xffff;\
+ r6.h = (mask) >> 16;\
+ r7 = r7 | r6;\
+ sys_reg = r7;\
+ csync;\
+ (R7:6) = [SP++]
+
+/*
+ * Clear the corresponding bits in a System Register (SR);
+ * All bits set in "mask" will be cleared in the SR
+ * specified by "sys_reg" bitclr_SR(sys_reg, mask), where
+ * sys_reg is the SR and mask are the bits to be cleared.
+ */
+#define bitclr_SR(sys_reg, mask)\
+ [--SP] = (R7:6);\
+ r7 = sys_reg;\
+ r7 =~ r7;\
+ r6.l = (mask) & 0xffff;\
+ r6.h = (mask) >> 16;\
+ r7 = r7 | r6;\
+ r7 =~ r7;\
+ sys_reg = r7;\
+ csync;\
+ (R7:6) = [SP++]
+
+/*
+ * Set the corresponding bits in a Memory Mapped Register (MMR);
+ * All bits set in "mask" will be set in the MMR specified by "mmr_reg"
+ * bitset_MMR(mmr_reg, mask), where mmr_reg is the MMR and mask are
+ * the bits to be set.
+ */
+#define bitset_MMR(mmr_reg, mask)\
+ [--SP] = (R7:6);\
+ [--SP] = P5;\
+ p5.l = mmr_reg & 0xffff;\
+ p5.h = mmr_reg >> 16;\
+ r7 = [p5];\
+ r6.l = (mask) & 0xffff;\
+ r6.h = (mask) >> 16;\
+ r7 = r7 | r6;\
+ [p5] = r7;\
+ csync;\
+ p5 = [SP++];\
+ (R7:6) = [SP++]
+
+/*
+ * Clear the corresponding bits in a Memory Mapped Register (MMR);
+ * All bits set in "mask" will be cleared in the MMR specified by "mmr_reg"
+ * bitclr_MMRreg(mmr_reg, mask), where sys_reg is the MMR and mask are
+ * the bits to be cleared.
+ */
+#define bitclr_MMR(mmr_reg, mask)\
+ [--SP] = (R7:6);\
+ [--SP] = P5;\
+ p5.l = mmr_reg & 0xffff;\
+ p5.h = mmr_reg >> 16;\
+ r7 = [p5];\
+ r7 =~ r7;\
+ r6.l = (mask) & 0xffff;\
+ r6.h = (mask) >> 16;\
+ r7 = r7 | r6;\
+ r7 =~ r7;\
+ [p5] = r7;\
+ csync;\
+ p5 = [SP++];\
+ (R7:6) = [SP++]
+
+#endif /* _MACROS_H */
diff --git a/include/asm-blackfin/mem_map.h b/include/asm-blackfin/mem_map.h
new file mode 100644
index 0000000..42d1f37
--- /dev/null
+++ b/include/asm-blackfin/mem_map.h
@@ -0,0 +1,12 @@
+/*
+ * mem_map.h
+ * Common header file for blackfin family of processors.
+ *
+ */
+
+#ifndef _MEM_MAP_H_
+#define _MEM_MAP_H_
+
+#include <asm/mach/mem_map.h>
+
+#endif /* _MEM_MAP_H_ */
diff --git a/include/asm-blackfin/mman.h b/include/asm-blackfin/mman.h
new file mode 100644
index 0000000..4d504f9
--- /dev/null
+++ b/include/asm-blackfin/mman.h
@@ -0,0 +1,45 @@
+#ifndef __BFIN_MMAN_H__
+#define __BFIN_MMAN_H__
+
+#define PROT_READ 0x1 /* page can be read */
+#define PROT_WRITE 0x2 /* page can be written */
+#define PROT_EXEC 0x4 /* page can be executed */
+#define PROT_SEM 0x8 /* page may be used for atomic ops */
+#define PROT_NONE 0x0 /* page can not be accessed */
+#define PROT_GROWSDOWN 0x01000000 /* mprotect flag: extend change to start of growsdown vma */
+#define PROT_GROWSUP 0x02000000 /* mprotect flag: extend change to end of growsup vma */
+
+#define MAP_SHARED 0x01 /* Share changes */
+#define MAP_PRIVATE 0x02 /* Changes are private */
+#define MAP_TYPE 0x0f /* Mask for type of mapping */
+#define MAP_FIXED 0x10 /* Interpret addr exactly */
+#define MAP_ANONYMOUS 0x20 /* don't use a file */
+
+#define MAP_GROWSDOWN 0x0100 /* stack-like segment */
+#define MAP_DENYWRITE 0x0800 /* ETXTBSY */
+#define MAP_EXECUTABLE 0x1000 /* mark it as an executable */
+#define MAP_LOCKED 0x2000 /* pages are locked */
+#define MAP_NORESERVE 0x4000 /* don't check for reservations */
+#define MAP_POPULATE 0x8000 /* populate (prefault) pagetables */
+#define MAP_NONBLOCK 0x10000 /* do not block on IO */
+#define MAP_UNINITIALIZE 0x4000000 /* For anonymous mmap, memory could
+ be uninitialized. */
+
+#define MS_ASYNC 1 /* sync memory asynchronously */
+#define MS_INVALIDATE 2 /* invalidate the caches */
+#define MS_SYNC 4 /* synchronous memory sync */
+
+#define MCL_CURRENT 1 /* lock all current mappings */
+#define MCL_FUTURE 2 /* lock all future mappings */
+
+#define MADV_NORMAL 0x0 /* default page-in behavior */
+#define MADV_RANDOM 0x1 /* page-in minimum required */
+#define MADV_SEQUENTIAL 0x2 /* read-ahead aggressively */
+#define MADV_WILLNEED 0x3 /* pre-fault pages */
+#define MADV_DONTNEED 0x4 /* discard these pages */
+
+/* compatibility flags */
+#define MAP_ANON MAP_ANONYMOUS
+#define MAP_FILE 0
+
+#endif /* __BFIN_MMAN_H__ */
diff --git a/include/asm-blackfin/mmu.h b/include/asm-blackfin/mmu.h
new file mode 100644
index 0000000..11d52f1
--- /dev/null
+++ b/include/asm-blackfin/mmu.h
@@ -0,0 +1,30 @@
+#ifndef __MMU_H
+#define __MMU_H
+
+/* Copyright (C) 2002, David McCullough <davidm@snapgear.com> */
+
+struct sram_list_struct {
+ struct sram_list_struct *next;
+ void *addr;
+ size_t length;
+};
+
+typedef struct {
+ struct vm_list_struct *vmlist;
+ unsigned long end_brk;
+ unsigned long stack_start;
+
+ /* Points to the location in SDRAM where the L1 stack is normally
+ saved, or NULL if the stack is always in SDRAM. */
+ void *l1_stack_save;
+
+ struct sram_list_struct *sram_list;
+
+#ifdef CONFIG_BINFMT_ELF_FDPIC
+ unsigned long exec_fdpic_loadmap;
+ unsigned long interp_fdpic_loadmap;
+#endif
+
+} mm_context_t;
+
+#endif
diff --git a/include/asm-blackfin/mmu_context.h b/include/asm-blackfin/mmu_context.h
new file mode 100644
index 0000000..c5c71a6
--- /dev/null
+++ b/include/asm-blackfin/mmu_context.h
@@ -0,0 +1,129 @@
+/*
+ * File: include/asm-blackfin/mmu_context.h
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef __BLACKFIN_MMU_CONTEXT_H__
+#define __BLACKFIN_MMU_CONTEXT_H__
+
+#include <asm/setup.h>
+#include <asm/page.h>
+#include <asm/pgalloc.h>
+
+extern void *current_l1_stack_save;
+extern int nr_l1stack_tasks;
+extern void *l1_stack_base;
+extern unsigned long l1_stack_len;
+
+extern int l1sram_free(const void*);
+extern void *l1sram_alloc_max(void*);
+
+static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
+{
+}
+
+/* Called when creating a new context during fork() or execve(). */
+static inline int
+init_new_context(struct task_struct *tsk, struct mm_struct *mm)
+{
+ return 0;
+}
+
+static inline void free_l1stack(void)
+{
+ nr_l1stack_tasks--;
+ if (nr_l1stack_tasks == 0)
+ l1sram_free(l1_stack_base);
+}
+static inline void destroy_context(struct mm_struct *mm)
+{
+ struct sram_list_struct *tmp;
+
+ if (current_l1_stack_save == mm->context.l1_stack_save)
+ current_l1_stack_save = 0;
+ if (mm->context.l1_stack_save)
+ free_l1stack();
+
+ while ((tmp = mm->context.sram_list)) {
+ mm->context.sram_list = tmp->next;
+ sram_free(tmp->addr);
+ kfree(tmp);
+ }
+}
+
+static inline unsigned long
+alloc_l1stack(unsigned long length, unsigned long *stack_base)
+{
+ if (nr_l1stack_tasks == 0) {
+ l1_stack_base = l1sram_alloc_max(&l1_stack_len);
+ if (!l1_stack_base)
+ return 0;
+ }
+
+ if (l1_stack_len < length) {
+ if (nr_l1stack_tasks == 0)
+ l1sram_free(l1_stack_base);
+ return 0;
+ }
+ *stack_base = (unsigned long)l1_stack_base;
+ nr_l1stack_tasks++;
+ return l1_stack_len;
+}
+
+static inline int
+activate_l1stack(struct mm_struct *mm, unsigned long sp_base)
+{
+ if (current_l1_stack_save)
+ memcpy(current_l1_stack_save, l1_stack_base, l1_stack_len);
+ mm->context.l1_stack_save = current_l1_stack_save = (void*)sp_base;
+ memcpy(l1_stack_base, current_l1_stack_save, l1_stack_len);
+ return 1;
+}
+
+#define deactivate_mm(tsk,mm) do { } while (0)
+
+static inline void activate_mm(struct mm_struct *prev_mm,
+ struct mm_struct *next_mm)
+{
+ if (!next_mm->context.l1_stack_save)
+ return;
+ if (next_mm->context.l1_stack_save == current_l1_stack_save)
+ return;
+ if (current_l1_stack_save) {
+ memcpy(current_l1_stack_save, l1_stack_base, l1_stack_len);
+ }
+ current_l1_stack_save = next_mm->context.l1_stack_save;
+ memcpy(l1_stack_base, current_l1_stack_save, l1_stack_len);
+}
+
+static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
+ struct task_struct *tsk)
+{
+ activate_mm(prev, next);
+}
+
+#endif
diff --git a/include/asm-blackfin/module.h b/include/asm-blackfin/module.h
new file mode 100644
index 0000000..3c7ce16
--- /dev/null
+++ b/include/asm-blackfin/module.h
@@ -0,0 +1,19 @@
+#ifndef _ASM_BFIN_MODULE_H
+#define _ASM_BFIN_MODULE_H
+
+#define MODULE_SYMBOL_PREFIX "_"
+
+#define Elf_Shdr Elf32_Shdr
+#define Elf_Sym Elf32_Sym
+#define Elf_Ehdr Elf32_Ehdr
+#define FLG_CODE_IN_L1 0x10
+#define FLG_DATA_IN_L1 0x20
+
+struct mod_arch_specific {
+ Elf_Shdr *text_l1;
+ Elf_Shdr *data_a_l1;
+ Elf_Shdr *bss_a_l1;
+ Elf_Shdr *data_b_l1;
+ Elf_Shdr *bss_b_l1;
+};
+#endif /* _ASM_BFIN_MODULE_H */
diff --git a/include/asm-blackfin/msgbuf.h b/include/asm-blackfin/msgbuf.h
new file mode 100644
index 0000000..6fcbe8c
--- /dev/null
+++ b/include/asm-blackfin/msgbuf.h
@@ -0,0 +1,31 @@
+#ifndef _BFIN_MSGBUF_H
+#define _BFIN_MSGBUF_H
+
+/*
+ * The msqid64_ds structure for bfin architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct msqid64_ds {
+ struct ipc64_perm msg_perm;
+ __kernel_time_t msg_stime; /* last msgsnd time */
+ unsigned long __unused1;
+ __kernel_time_t msg_rtime; /* last msgrcv time */
+ unsigned long __unused2;
+ __kernel_time_t msg_ctime; /* last change time */
+ unsigned long __unused3;
+ unsigned long msg_cbytes; /* current number of bytes on queue */
+ unsigned long msg_qnum; /* number of messages in queue */
+ unsigned long msg_qbytes; /* max number of bytes on queue */
+ __kernel_pid_t msg_lspid; /* pid of last msgsnd */
+ __kernel_pid_t msg_lrpid; /* last receive pid */
+ unsigned long __unused4;
+ unsigned long __unused5;
+};
+
+#endif /* _BFIN_MSGBUF_H */
diff --git a/include/asm-blackfin/mutex.h b/include/asm-blackfin/mutex.h
new file mode 100644
index 0000000..458c1f7
--- /dev/null
+++ b/include/asm-blackfin/mutex.h
@@ -0,0 +1,9 @@
+/*
+ * Pull in the generic implementation for the mutex fastpath.
+ *
+ * TODO: implement optimized primitives instead, or leave the generic
+ * implementation in place, or pick the atomic_xchg() based generic
+ * implementation. (see asm-generic/mutex-xchg.h for details)
+ */
+
+#include <asm-generic/mutex-dec.h>
diff --git a/include/asm-blackfin/namei.h b/include/asm-blackfin/namei.h
new file mode 100644
index 0000000..8b89a2d
--- /dev/null
+++ b/include/asm-blackfin/namei.h
@@ -0,0 +1,19 @@
+/*
+ * linux/include/asm/namei.h
+ *
+ * Included from linux/fs/namei.c
+ *
+ * Changes made by Lineo Inc. May 2001
+ */
+
+#ifndef __BFIN_NAMEI_H
+#define __BFIN_NAMEI_H
+
+/* This dummy routine maybe changed to something useful
+ * for /usr/gnemul/ emulation stuff.
+ * Look at asm-sparc/namei.h for details.
+ */
+
+#define __emul_prefix() NULL
+
+#endif
diff --git a/include/asm-blackfin/page.h b/include/asm-blackfin/page.h
new file mode 100644
index 0000000..ffad947
--- /dev/null
+++ b/include/asm-blackfin/page.h
@@ -0,0 +1,89 @@
+#ifndef _BLACKFIN_PAGE_H
+#define _BLACKFIN_PAGE_H
+
+/* PAGE_SHIFT determines the page size */
+
+#define PAGE_SHIFT 12
+#define PAGE_SIZE (1UL << PAGE_SHIFT)
+#define PAGE_MASK (~(PAGE_SIZE-1))
+
+#ifdef __KERNEL__
+
+#include <asm/setup.h>
+
+#ifndef __ASSEMBLY__
+
+#define get_user_page(vaddr) __get_free_page(GFP_KERNEL)
+#define free_user_page(page, addr) free_page(addr)
+
+#define clear_page(page) memset((page), 0, PAGE_SIZE)
+#define copy_page(to,from) memcpy((to), (from), PAGE_SIZE)
+
+#define clear_user_page(page, vaddr,pg) clear_page(page)
+#define copy_user_page(to, from, vaddr,pg) copy_page(to, from)
+
+/*
+ * These are used to make use of C type-checking..
+ */
+typedef struct {
+ unsigned long pte;
+} pte_t;
+typedef struct {
+ unsigned long pmd[16];
+} pmd_t;
+typedef struct {
+ unsigned long pgd;
+} pgd_t;
+typedef struct {
+ unsigned long pgprot;
+} pgprot_t;
+
+#define pte_val(x) ((x).pte)
+#define pmd_val(x) ((&x)->pmd[0])
+#define pgd_val(x) ((x).pgd)
+#define pgprot_val(x) ((x).pgprot)
+
+#define __pte(x) ((pte_t) { (x) } )
+#define __pmd(x) ((pmd_t) { (x) } )
+#define __pgd(x) ((pgd_t) { (x) } )
+#define __pgprot(x) ((pgprot_t) { (x) } )
+
+/* to align the pointer to the (next) page boundary */
+#define PAGE_ALIGN(addr) (((addr)+PAGE_SIZE-1)&PAGE_MASK)
+
+extern unsigned long memory_start;
+extern unsigned long memory_end;
+
+#endif /* !__ASSEMBLY__ */
+
+#include <asm/page_offset.h>
+#include <asm/io.h>
+
+#define PAGE_OFFSET (PAGE_OFFSET_RAW)
+
+#ifndef __ASSEMBLY__
+
+#define __pa(vaddr) virt_to_phys((void *)(vaddr))
+#define __va(paddr) phys_to_virt((unsigned long)(paddr))
+
+#define MAP_NR(addr) (((unsigned long)(addr)-PAGE_OFFSET) >> PAGE_SHIFT)
+
+#define virt_to_pfn(kaddr) (__pa(kaddr) >> PAGE_SHIFT)
+#define pfn_to_virt(pfn) __va((pfn) << PAGE_SHIFT)
+#define virt_to_page(addr) (mem_map + (((unsigned long)(addr)-PAGE_OFFSET) >> PAGE_SHIFT))
+#define page_to_virt(page) ((((page) - mem_map) << PAGE_SHIFT) + PAGE_OFFSET)
+#define VALID_PAGE(page) ((page - mem_map) < max_mapnr)
+
+#define pfn_to_page(pfn) virt_to_page(pfn_to_virt(pfn))
+#define page_to_pfn(page) virt_to_pfn(page_to_virt(page))
+#define pfn_valid(pfn) ((pfn) < max_mapnr)
+
+#define virt_addr_valid(kaddr) (((void *)(kaddr) >= (void *)PAGE_OFFSET) && \
+ ((void *)(kaddr) < (void *)memory_end))
+
+#include <asm-generic/page.h>
+
+#endif /* __ASSEMBLY__ */
+#endif /* __KERNEL__ */
+
+#endif /* _BLACKFIN_PAGE_H */
diff --git a/include/asm-blackfin/page_offset.h b/include/asm-blackfin/page_offset.h
new file mode 100644
index 0000000..3b671d5
--- /dev/null
+++ b/include/asm-blackfin/page_offset.h
@@ -0,0 +1,6 @@
+
+/* This handles the memory map.. */
+
+#ifdef CONFIG_BFIN
+#define PAGE_OFFSET_RAW 0x00000000
+#endif
diff --git a/include/asm-blackfin/param.h b/include/asm-blackfin/param.h
new file mode 100644
index 0000000..41564a6
--- /dev/null
+++ b/include/asm-blackfin/param.h
@@ -0,0 +1,22 @@
+#ifndef _BLACKFIN_PARAM_H
+#define _BLACKFIN_PARAM_H
+
+#ifdef __KERNEL__
+#define HZ CONFIG_HZ
+#define USER_HZ 100
+#define CLOCKS_PER_SEC (USER_HZ)
+#endif
+
+#ifndef HZ
+#define HZ 100
+#endif
+
+#define EXEC_PAGESIZE 4096
+
+#ifndef NOGROUP
+#define NOGROUP (-1)
+#endif
+
+#define MAXHOSTNAMELEN 64 /* max length of hostname */
+
+#endif /* _BLACKFIN_PARAM_H */
diff --git a/include/asm-blackfin/pci.h b/include/asm-blackfin/pci.h
new file mode 100644
index 0000000..6127735
--- /dev/null
+++ b/include/asm-blackfin/pci.h
@@ -0,0 +1,148 @@
+/* Changed from asm-m68k version, Lineo Inc. May 2001 */
+
+#ifndef _ASM_BFIN_PCI_H
+#define _ASM_BFIN_PCI_H
+
+#include <asm/scatterlist.h>
+
+/*
+ *
+ * Written by Wout Klaren.
+ */
+
+/* Added by Chang Junxiao */
+#define PCIBIOS_MIN_IO 0x00001000
+#define PCIBIOS_MIN_MEM 0x10000000
+
+#define PCI_DMA_BUS_IS_PHYS (1)
+struct pci_ops;
+
+/*
+ * Structure with hardware dependent information and functions of the
+ * PCI bus.
+ */
+struct pci_bus_info {
+
+ /*
+ * Resources of the PCI bus.
+ */
+ struct resource mem_space;
+ struct resource io_space;
+
+ /*
+ * System dependent functions.
+ */
+ struct pci_ops *bfin_pci_ops;
+ void (*fixup) (int pci_modify);
+ void (*conf_device) (unsigned char bus, unsigned char device_fn);
+};
+
+#define pcibios_assign_all_busses() 0
+static inline void pcibios_set_master(struct pci_dev *dev)
+{
+
+ /* No special bus mastering setup handling */
+}
+static inline void pcibios_penalize_isa_irq(int irq)
+{
+
+ /* We don't do dynamic PCI IRQ allocation */
+}
+static inline dma_addr_t pci_map_single(struct pci_dev *hwdev, void *ptr,
+ size_t size, int direction)
+{
+ if (direction == PCI_DMA_NONE)
+ BUG();
+
+ /* return virt_to_bus(ptr); */
+ return (dma_addr_t) ptr;
+}
+
+/* Unmap a single streaming mode DMA translation. The dma_addr and size
+ * must match what was provided for in a previous pci_map_single call. All
+ * other usages are undefined.
+ *
+ * After this call, reads by the cpu to the buffer are guarenteed to see
+ * whatever the device wrote there.
+ */
+static inline void pci_unmap_single(struct pci_dev *hwdev, dma_addr_t dma_addr,
+ size_t size, int direction)
+{
+ if (direction == PCI_DMA_NONE)
+ BUG();
+
+ /* Nothing to do */
+}
+
+/* Map a set of buffers described by scatterlist in streaming
+ * mode for DMA. This is the scather-gather version of the
+ * above pci_map_single interface. Here the scatter gather list
+ * elements are each tagged with the appropriate dma address
+ * and length. They are obtained via sg_dma_{address,length}(SG).
+ *
+ * NOTE: An implementation may be able to use a smaller number of
+ * DMA address/length pairs than there are SG table elements.
+ * (for example via virtual mapping capabilities)
+ * The routine returns the number of addr/length pairs actually
+ * used, at most nents.
+ *
+ * Device ownership issues as mentioned above for pci_map_single are
+ * the same here.
+ */
+static inline int pci_map_sg(struct pci_dev *hwdev, struct scatterlist *sg,
+ int nents, int direction)
+{
+ if (direction == PCI_DMA_NONE)
+ BUG();
+ return nents;
+}
+
+/* Unmap a set of streaming mode DMA translations.
+ * Again, cpu read rules concerning calls here are the same as for
+ * pci_unmap_single() above.
+ */
+static inline void pci_unmap_sg(struct pci_dev *hwdev, struct scatterlist *sg,
+ int nents, int direction)
+{
+ if (direction == PCI_DMA_NONE)
+ BUG();
+
+ /* Nothing to do */
+}
+
+/* Make physical memory consistent for a single
+ * streaming mode DMA translation after a transfer.
+ *
+ * If you perform a pci_map_single() but wish to interrogate the
+ * buffer using the cpu, yet do not wish to teardown the PCI dma
+ * mapping, you must call this function before doing so. At the
+ * next point you give the PCI dma address back to the card, the
+ * device again owns the buffer.
+ */
+static inline void pci_dma_sync_single(struct pci_dev *hwdev,
+ dma_addr_t dma_handle, size_t size,
+ int direction)
+{
+ if (direction == PCI_DMA_NONE)
+ BUG();
+
+ /* Nothing to do */
+}
+
+/* Make physical memory consistent for a set of streaming
+ * mode DMA translations after a transfer.
+ *
+ * The same as pci_dma_sync_single but for a scatter-gather list,
+ * same rules and usage.
+ */
+static inline void pci_dma_sync_sg(struct pci_dev *hwdev,
+ struct scatterlist *sg, int nelems,
+ int direction)
+{
+ if (direction == PCI_DMA_NONE)
+ BUG();
+
+ /* Nothing to do */
+}
+
+#endif /* _ASM_BFIN_PCI_H */
diff --git a/include/asm-blackfin/percpu.h b/include/asm-blackfin/percpu.h
new file mode 100644
index 0000000..78dd61f
--- /dev/null
+++ b/include/asm-blackfin/percpu.h
@@ -0,0 +1,6 @@
+#ifndef __ARCH_BLACKFIN_PERCPU__
+#define __ARCH_BLACKFIN_PERCPU__
+
+#include <asm-generic/percpu.h>
+
+#endif /* __ARCH_BLACKFIN_PERCPU__ */
diff --git a/include/asm-blackfin/pgalloc.h b/include/asm-blackfin/pgalloc.h
new file mode 100644
index 0000000..c686e05
--- /dev/null
+++ b/include/asm-blackfin/pgalloc.h
@@ -0,0 +1,8 @@
+#ifndef _BLACKFIN_PGALLOC_H
+#define _BLACKFIN_PGALLOC_H
+
+#include <asm/setup.h>
+
+#define check_pgt_cache() do { } while (0)
+
+#endif /* _BLACKFIN_PGALLOC_H */
diff --git a/include/asm-blackfin/pgtable.h b/include/asm-blackfin/pgtable.h
new file mode 100644
index 0000000..5a8f9e4
--- /dev/null
+++ b/include/asm-blackfin/pgtable.h
@@ -0,0 +1,96 @@
+#ifndef _BLACKFIN_PGTABLE_H
+#define _BLACKFIN_PGTABLE_H
+
+#include <asm-generic/4level-fixup.h>
+
+#include <asm/page.h>
+#include <asm/cplb.h>
+
+typedef pte_t *pte_addr_t;
+/*
+* Trivial page table functions.
+*/
+#define pgd_present(pgd) (1)
+#define pgd_none(pgd) (0)
+#define pgd_bad(pgd) (0)
+#define pgd_clear(pgdp)
+#define kern_addr_valid(addr) (1)
+
+#define pmd_offset(a, b) ((void *)0)
+#define pmd_none(x) (!pmd_val(x))
+#define pmd_present(x) (pmd_val(x))
+#define pmd_clear(xp) do { set_pmd(xp, __pmd(0)); } while (0)
+#define pmd_bad(x) (pmd_val(x) & ~PAGE_MASK)
+
+#define kern_addr_valid(addr) (1)
+
+#define PAGE_NONE __pgprot(0) /* these mean nothing to NO_MM */
+#define PAGE_SHARED __pgprot(0) /* these mean nothing to NO_MM */
+#define PAGE_COPY __pgprot(0) /* these mean nothing to NO_MM */
+#define PAGE_READONLY __pgprot(0) /* these mean nothing to NO_MM */
+#define PAGE_KERNEL __pgprot(0) /* these mean nothing to NO_MM */
+
+extern void paging_init(void);
+
+#define __swp_type(x) (0)
+#define __swp_offset(x) (0)
+#define __swp_entry(typ,off) ((swp_entry_t) { ((typ) | ((off) << 7)) })
+#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(x) ((pte_t) { (x).val })
+
+static inline int pte_file(pte_t pte)
+{
+ return 0;
+}
+
+#define set_pte(pteptr, pteval) (*(pteptr) = pteval)
+#define set_pte_at(mm, addr, ptep, pteval) set_pte(ptep, pteval)
+
+/*
+ * Page assess control based on Blackfin CPLB management
+ */
+#define _PAGE_RD (CPLB_USER_RD)
+#define _PAGE_WR (CPLB_USER_WR)
+#define _PAGE_USER (CPLB_USER_RD | CPLB_USER_WR)
+#define _PAGE_ACCESSED CPLB_ALL_ACCESS
+#define _PAGE_DIRTY (CPLB_DIRTY)
+
+#define PTE_BIT_FUNC(fn, op) \
+ static inline pte_t pte_##fn(pte_t _pte) { _pte.pte op; return _pte; }
+
+PTE_BIT_FUNC(rdprotect, &= ~_PAGE_RD);
+PTE_BIT_FUNC(mkread, |= _PAGE_RD);
+PTE_BIT_FUNC(wrprotect, &= ~_PAGE_WR);
+PTE_BIT_FUNC(mkwrite, |= _PAGE_WR);
+PTE_BIT_FUNC(exprotect, &= ~_PAGE_USER);
+PTE_BIT_FUNC(mkexec, |= _PAGE_USER);
+PTE_BIT_FUNC(mkclean, &= ~_PAGE_DIRTY);
+PTE_BIT_FUNC(mkdirty, |= _PAGE_DIRTY);
+PTE_BIT_FUNC(mkold, &= ~_PAGE_ACCESSED);
+PTE_BIT_FUNC(mkyoung, |= _PAGE_ACCESSED);
+
+/*
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc..
+ */
+#define ZERO_PAGE(vaddr) (virt_to_page(0))
+
+extern unsigned int kobjsize(const void *objp);
+
+#define swapper_pg_dir ((pgd_t *) 0)
+/*
+ * No page table caches to initialise.
+ */
+#define pgtable_cache_init() do { } while (0)
+#define io_remap_pfn_range remap_pfn_range
+
+/*
+ * All 32bit addresses are effectively valid for vmalloc...
+ * Sort of meaningless for non-VM targets.
+ */
+#define VMALLOC_START 0
+#define VMALLOC_END 0xffffffff
+
+#include <asm-generic/pgtable.h>
+
+#endif /* _BLACKFIN_PGTABLE_H */
diff --git a/include/asm-blackfin/poll.h b/include/asm-blackfin/poll.h
new file mode 100644
index 0000000..94cc263
--- /dev/null
+++ b/include/asm-blackfin/poll.h
@@ -0,0 +1,24 @@
+#ifndef __BFIN_POLL_H
+#define __BFIN_POLL_H
+
+#define POLLIN 1
+#define POLLPRI 2
+#define POLLOUT 4
+#define POLLERR 8
+#define POLLHUP 16
+#define POLLNVAL 32
+#define POLLRDNORM 64
+#define POLLWRNORM POLLOUT
+#define POLLRDBAND 128
+#define POLLWRBAND 256
+#define POLLMSG 0x0400
+#define POLLREMOVE 0x1000
+#define POLLRDHUP 0x2000
+
+struct pollfd {
+ int fd;
+ short events;
+ short revents;
+};
+
+#endif /* __BFIN_POLL_H */
diff --git a/include/asm-blackfin/posix_types.h b/include/asm-blackfin/posix_types.h
new file mode 100644
index 0000000..c3fa50f
--- /dev/null
+++ b/include/asm-blackfin/posix_types.h
@@ -0,0 +1,65 @@
+#ifndef __ARCH_BFIN_POSIX_TYPES_H
+#define __ARCH_BFIN_POSIX_TYPES_H
+
+/*
+ * This file is generally used by user-level software, so you need to
+ * be a little careful about namespace pollution etc. Also, we cannot
+ * assume GCC is being used.
+ */
+
+typedef unsigned long __kernel_ino_t;
+typedef unsigned short __kernel_mode_t;
+typedef unsigned short __kernel_nlink_t;
+typedef long __kernel_off_t;
+typedef int __kernel_pid_t;
+typedef unsigned int __kernel_ipc_pid_t;
+typedef unsigned int __kernel_uid_t;
+typedef unsigned int __kernel_gid_t;
+typedef unsigned long __kernel_size_t;
+typedef long __kernel_ssize_t;
+typedef int __kernel_ptrdiff_t;
+typedef long __kernel_time_t;
+typedef long __kernel_suseconds_t;
+typedef long __kernel_clock_t;
+typedef int __kernel_timer_t;
+typedef int __kernel_clockid_t;
+typedef int __kernel_daddr_t;
+typedef char *__kernel_caddr_t;
+typedef unsigned short __kernel_uid16_t;
+typedef unsigned short __kernel_gid16_t;
+typedef unsigned int __kernel_uid32_t;
+typedef unsigned int __kernel_gid32_t;
+
+typedef unsigned short __kernel_old_uid_t;
+typedef unsigned short __kernel_old_gid_t;
+typedef unsigned short __kernel_old_dev_t;
+
+#ifdef __GNUC__
+typedef long long __kernel_loff_t;
+#endif
+
+typedef struct {
+#if defined(__KERNEL__) || defined(__USE_ALL)
+ int val[2];
+#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */
+ int __val[2];
+#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */
+} __kernel_fsid_t;
+
+#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
+
+#undef __FD_SET
+#define __FD_SET(d, set) ((set)->fds_bits[__FDELT(d)] |= __FDMASK(d))
+
+#undef __FD_CLR
+#define __FD_CLR(d, set) ((set)->fds_bits[__FDELT(d)] &= ~__FDMASK(d))
+
+#undef __FD_ISSET
+#define __FD_ISSET(d, set) ((set)->fds_bits[__FDELT(d)] & __FDMASK(d))
+
+#undef __FD_ZERO
+#define __FD_ZERO(fdsetp) (memset (fdsetp, 0, sizeof(*(fd_set *)fdsetp)))
+
+#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */
+
+#endif
diff --git a/include/asm-blackfin/processor.h b/include/asm-blackfin/processor.h
new file mode 100644
index 0000000..997465c
--- /dev/null
+++ b/include/asm-blackfin/processor.h
@@ -0,0 +1,130 @@
+#ifndef __ASM_BFIN_PROCESSOR_H
+#define __ASM_BFIN_PROCESSOR_H
+
+/*
+ * Default implementation of macro that returns current
+ * instruction pointer ("program counter").
+ */
+#define current_text_addr() ({ __label__ _l; _l: &&_l;})
+
+#include <asm/blackfin.h>
+#include <asm/segment.h>
+#include <linux/compiler.h>
+
+static inline unsigned long rdusp(void)
+{
+ unsigned long usp;
+
+ __asm__ __volatile__("%0 = usp;\n\t":"=da"(usp));
+ return usp;
+}
+
+static inline void wrusp(unsigned long usp)
+{
+ __asm__ __volatile__("usp = %0;\n\t"::"da"(usp));
+}
+
+/*
+ * User space process size: 1st byte beyond user address space.
+ */
+extern unsigned long memory_end;
+#define TASK_SIZE (memory_end)
+
+#define TASK_UNMAPPED_BASE 0
+
+struct thread_struct {
+ unsigned long ksp; /* kernel stack pointer */
+ unsigned long usp; /* user stack pointer */
+ unsigned short seqstat; /* saved status register */
+ unsigned long esp0; /* points to SR of stack frame pt_regs */
+ unsigned long pc; /* instruction pointer */
+ void * debuggerinfo;
+};
+
+#define INIT_THREAD { \
+ sizeof(init_stack) + (unsigned long) init_stack, 0, \
+ PS_S, 0, 0 \
+}
+
+/*
+ * Do necessary setup to start up a newly executed thread.
+ *
+ * pass the data segment into user programs if it exists,
+ * it can't hurt anything as far as I can tell
+ */
+#define start_thread(_regs, _pc, _usp) \
+do { \
+ set_fs(USER_DS); \
+ (_regs)->pc = (_pc); \
+ if (current->mm) \
+ (_regs)->p5 = current->mm->start_data; \
+ current->thread_info->l1_task_info.stack_start \
+ = (void *)current->mm->context.stack_start; \
+ current->thread_info->l1_task_info.lowest_sp = (void *)(_usp); \
+ memcpy(L1_SCRATCH_TASK_INFO, ¤t->thread_info->l1_task_info, \
+ sizeof(*L1_SCRATCH_TASK_INFO)); \
+ wrusp(_usp); \
+} while(0)
+
+/* Forward declaration, a strange C thing */
+struct task_struct;
+
+/* Free all resources held by a thread. */
+static inline void release_thread(struct task_struct *dead_task)
+{
+}
+
+#define prepare_to_copy(tsk) do { } while (0)
+
+extern int kernel_thread(int (*fn) (void *), void *arg, unsigned long flags);
+
+/*
+ * Free current thread data structures etc..
+ */
+static inline void exit_thread(void)
+{
+}
+
+/*
+ * Return saved PC of a blocked thread.
+ */
+#define thread_saved_pc(tsk) (tsk->thread.pc)
+
+unsigned long get_wchan(struct task_struct *p);
+
+#define KSTK_EIP(tsk) \
+ ({ \
+ unsigned long eip = 0; \
+ if ((tsk)->thread.esp0 > PAGE_SIZE && \
+ MAP_NR((tsk)->thread.esp0) < max_mapnr) \
+ eip = ((struct pt_regs *) (tsk)->thread.esp0)->pc; \
+ eip; })
+#define KSTK_ESP(tsk) ((tsk) == current ? rdusp() : (tsk)->thread.usp)
+
+#define cpu_relax() barrier()
+
+/* Get the Silicon Revision of the chip */
+static inline uint32_t bfin_revid(void)
+{
+ /* stored in the upper 4 bits */
+ return bfin_read_CHIPID() >> 28;
+}
+
+static inline uint32_t bfin_compiled_revid(void)
+{
+#if defined(CONFIG_BF_REV_0_0)
+ return 0;
+#elif defined(CONFIG_BF_REV_0_1)
+ return 1;
+#elif defined(CONFIG_BF_REV_0_2)
+ return 2;
+#elif defined(CONFIG_BF_REV_0_3)
+ return 3;
+#elif defined(CONFIG_BF_REV_0_4)
+ return 4;
+#elif defined(CONFIG_BF_REV_0_5)
+ return 5;
+#endif
+}
+
+#endif
diff --git a/include/asm-blackfin/ptrace.h b/include/asm-blackfin/ptrace.h
new file mode 100644
index 0000000..b8346cd
--- /dev/null
+++ b/include/asm-blackfin/ptrace.h
@@ -0,0 +1,166 @@
+#ifndef _BFIN_PTRACE_H
+#define _BFIN_PTRACE_H
+
+/*
+ * GCC defines register number like this:
+ * -----------------------------
+ * 0 - 7 are data registers R0-R7
+ * 8 - 15 are address registers P0-P7
+ * 16 - 31 dsp registers I/B/L0 -- I/B/L3 & M0--M3
+ * 32 - 33 A registers A0 & A1
+ * 34 - status register
+ * -----------------------------
+ *
+ * We follows above, except:
+ * 32-33 --- Low 32-bit of A0&1
+ * 34-35 --- High 8-bit of A0&1
+ */
+
+#ifndef __ASSEMBLY__
+
+/* this struct defines the way the registers are stored on the
+ stack during a system call. */
+
+struct pt_regs {
+ long orig_pc;
+ long ipend;
+ long seqstat;
+ long rete;
+ long retn;
+ long retx;
+ long pc; /* PC == RETI */
+ long rets;
+ long reserved; /* Used as scratch during system calls */
+ long astat;
+ long lb1;
+ long lb0;
+ long lt1;
+ long lt0;
+ long lc1;
+ long lc0;
+ long a1w;
+ long a1x;
+ long a0w;
+ long a0x;
+ long b3;
+ long b2;
+ long b1;
+ long b0;
+ long l3;
+ long l2;
+ long l1;
+ long l0;
+ long m3;
+ long m2;
+ long m1;
+ long m0;
+ long i3;
+ long i2;
+ long i1;
+ long i0;
+ long usp;
+ long fp;
+ long p5;
+ long p4;
+ long p3;
+ long p2;
+ long p1;
+ long p0;
+ long r7;
+ long r6;
+ long r5;
+ long r4;
+ long r3;
+ long r2;
+ long r1;
+ long r0;
+ long orig_r0;
+ long orig_p0;
+ long syscfg;
+};
+
+/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
+#define PTRACE_GETREGS 12
+#define PTRACE_SETREGS 13 /* ptrace signal */
+
+#ifdef CONFIG_BINFMT_ELF_FDPIC
+#define PTRACE_GETFDPIC 31
+#define PTRACE_GETFDPIC_EXEC 0
+#define PTRACE_GETFDPIC_INTERP 1
+#endif
+
+#define PS_S (0x0002)
+
+/* user_mode returns true if only one bit is set in IPEND, other than the
+ master interrupt enable. */
+#define user_mode(regs) (!(((regs)->ipend & ~0x10) & (((regs)->ipend & ~0x10) - 1)))
+#define instruction_pointer(regs) ((regs)->pc)
+#define profile_pc(regs) instruction_pointer(regs)
+extern void show_regs(struct pt_regs *);
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * Offsets used by 'ptrace' system call interface.
+ */
+
+#define PT_R0 204
+#define PT_R1 200
+#define PT_R2 196
+#define PT_R3 192
+#define PT_R4 188
+#define PT_R5 184
+#define PT_R6 180
+#define PT_R7 176
+#define PT_P0 172
+#define PT_P1 168
+#define PT_P2 164
+#define PT_P3 160
+#define PT_P4 156
+#define PT_P5 152
+#define PT_FP 148
+#define PT_USP 144
+#define PT_I0 140
+#define PT_I1 136
+#define PT_I2 132
+#define PT_I3 128
+#define PT_M0 124
+#define PT_M1 120
+#define PT_M2 116
+#define PT_M3 112
+#define PT_L0 108
+#define PT_L1 104
+#define PT_L2 100
+#define PT_L3 96
+#define PT_B0 92
+#define PT_B1 88
+#define PT_B2 84
+#define PT_B3 80
+#define PT_A0X 76
+#define PT_A0W 72
+#define PT_A1X 68
+#define PT_A1W 64
+#define PT_LC0 60
+#define PT_LC1 56
+#define PT_LT0 52
+#define PT_LT1 48
+#define PT_LB0 44
+#define PT_LB1 40
+#define PT_ASTAT 36
+#define PT_RESERVED 32
+#define PT_RETS 28
+#define PT_PC 24
+#define PT_RETX 20
+#define PT_RETN 16
+#define PT_RETE 12
+#define PT_SEQSTAT 8
+#define PT_IPEND 4
+
+#define PT_SYSCFG 216
+#define PT_TEXT_ADDR 220
+#define PT_TEXT_END_ADDR 224
+#define PT_DATA_ADDR 228
+#define PT_FDPIC_EXEC 232
+#define PT_FDPIC_INTERP 236
+
+#endif /* _BFIN_PTRACE_H */
diff --git a/include/asm-blackfin/resource.h b/include/asm-blackfin/resource.h
new file mode 100644
index 0000000..091355a
--- /dev/null
+++ b/include/asm-blackfin/resource.h
@@ -0,0 +1,6 @@
+#ifndef _BFIN_RESOURCE_H
+#define _BFIN_RESOURCE_H
+
+#include <asm-generic/resource.h>
+
+#endif /* _BFIN_RESOURCE_H */
diff --git a/include/asm-blackfin/scatterlist.h b/include/asm-blackfin/scatterlist.h
new file mode 100644
index 0000000..60e07b9
--- /dev/null
+++ b/include/asm-blackfin/scatterlist.h
@@ -0,0 +1,26 @@
+#ifndef _BLACKFIN_SCATTERLIST_H
+#define _BLACKFIN_SCATTERLIST_H
+
+#include <linux/mm.h>
+
+struct scatterlist {
+ struct page *page;
+ unsigned int offset;
+ dma_addr_t dma_address;
+ unsigned int length;
+};
+
+/*
+ * These macros should be used after a pci_map_sg call has been done
+ * to get bus addresses of each of the SG entries and their lengths.
+ * You should only work with the number of sg entries pci_map_sg
+ * returns, or alternatively stop on the first sg_dma_len(sg) which
+ * is 0.
+ */
+#define sg_address(sg) (page_address((sg)->page) + (sg)->offset)
+#define sg_dma_address(sg) ((sg)->dma_address)
+#define sg_dma_len(sg) ((sg)->length)
+
+#define ISA_DMA_THRESHOLD (0xffffffff)
+
+#endif /* !(_BLACKFIN_SCATTERLIST_H) */
diff --git a/include/asm-blackfin/sections.h b/include/asm-blackfin/sections.h
new file mode 100644
index 0000000..1443c33
--- /dev/null
+++ b/include/asm-blackfin/sections.h
@@ -0,0 +1,7 @@
+#ifndef _BLACKFIN_SECTIONS_H
+#define _BLACKFIN_SECTIONS_H
+
+/* nothing to see, move along */
+#include <asm-generic/sections.h>
+
+#endif
diff --git a/include/asm-blackfin/segment.h b/include/asm-blackfin/segment.h
new file mode 100644
index 0000000..02cfd09
--- /dev/null
+++ b/include/asm-blackfin/segment.h
@@ -0,0 +1,7 @@
+#ifndef _BFIN_SEGMENT_H
+#define _BFIN_SEGMENT_H
+
+#define KERNEL_DS (0x5)
+#define USER_DS (0x1)
+
+#endif /* _BFIN_SEGMENT_H */
diff --git a/include/asm-blackfin/semaphore-helper.h b/include/asm-blackfin/semaphore-helper.h
new file mode 100644
index 0000000..9082b0d
--- /dev/null
+++ b/include/asm-blackfin/semaphore-helper.h
@@ -0,0 +1,82 @@
+/* Based on M68K version, Lineo Inc. May 2001 */
+
+#ifndef _BFIN_SEMAPHORE_HELPER_H
+#define _BFIN_SEMAPHORE_HELPER_H
+
+/*
+ * SMP- and interrupt-safe semaphores helper functions.
+ *
+ * (C) Copyright 1996 Linus Torvalds
+ *
+ */
+
+#include <asm/errno.h>
+
+/*
+ * These two _must_ execute atomically wrt each other.
+ */
+static inline void wake_one_more(struct semaphore *sem)
+{
+ atomic_inc(&sem->waking);
+}
+
+static inline int waking_non_zero(struct semaphore *sem)
+{
+ int ret;
+ unsigned long flags = 0;
+
+ spin_lock_irqsave(&semaphore_wake_lock, flags);
+ ret = 0;
+ if (atomic_read(&sem->waking) > 0) {
+ atomic_dec(&sem->waking);
+ ret = 1;
+ }
+ spin_unlock_irqrestore(&semaphore_wake_lock, flags);
+ return ret;
+}
+
+/*
+ * waking_non_zero_interruptible:
+ * 1 got the lock
+ * 0 go to sleep
+ * -EINTR interrupted
+ */
+static inline int waking_non_zero_interruptible(struct semaphore *sem,
+ struct task_struct *tsk)
+{
+ int ret = 0;
+ unsigned long flags = 0;
+
+ spin_lock_irqsave(&semaphore_wake_lock, flags);
+ if (atomic_read(&sem->waking) > 0) {
+ atomic_dec(&sem->waking);
+ ret = 1;
+ } else if (signal_pending(tsk)) {
+ atomic_inc(&sem->count);
+ ret = -EINTR;
+ }
+ spin_unlock_irqrestore(&semaphore_wake_lock, flags);
+ return ret;
+}
+
+/*
+ * waking_non_zero_trylock:
+ * 1 failed to lock
+ * 0 got the lock
+ */
+static inline int waking_non_zero_trylock(struct semaphore *sem)
+{
+ int ret = 1;
+ unsigned long flags = 0;
+
+ spin_lock_irqsave(&semaphore_wake_lock, flags);
+ if (atomic_read(&sem->waking) > 0) {
+ atomic_dec(&sem->waking);
+ ret = 0;
+ } else
+ atomic_inc(&sem->count);
+ spin_unlock_irqrestore(&semaphore_wake_lock, flags);
+ return ret;
+}
+
+#endif /* _BFIN_SEMAPHORE_HELPER_H */
diff --git a/include/asm-blackfin/semaphore.h b/include/asm-blackfin/semaphore.h
new file mode 100644
index 0000000..94c04d7
--- /dev/null
+++ b/include/asm-blackfin/semaphore.h
@@ -0,0 +1,106 @@
+#ifndef _BFIN_SEMAPHORE_H
+#define _BFIN_SEMAPHORE_H
+
+#ifndef __ASSEMBLY__
+
+#include <linux/linkage.h>
+#include <linux/wait.h>
+#include <linux/spinlock.h>
+#include <linux/rwsem.h>
+#include <asm/atomic.h>
+
+/*
+ * Interrupt-safe semaphores..
+ *
+ * (C) Copyright 1996 Linus Torvalds
+ *
+ * BFIN version by akbar hussain Lineo Inc April 2001
+ *
+ */
+
+struct semaphore {
+ atomic_t count;
+ int sleepers;
+ wait_queue_head_t wait;
+};
+
+#define __SEMAPHORE_INITIALIZER(name, n) \
+{ \
+ .count = ATOMIC_INIT(n), \
+ .sleepers = 0, \
+ .wait = __WAIT_QUEUE_HEAD_INITIALIZER((name).wait) \
+}
+
+#define __DECLARE_SEMAPHORE_GENERIC(name,count) \
+ struct semaphore name = __SEMAPHORE_INITIALIZER(name,count)
+
+#define DECLARE_MUTEX(name) __DECLARE_SEMAPHORE_GENERIC(name,1)
+#define DECLARE_MUTEX_LOCKED(name) __DECLARE_SEMAPHORE_GENERIC(name,0)
+
+static inline void sema_init(struct semaphore *sem, int val)
+{
+ *sem = (struct semaphore)__SEMAPHORE_INITIALIZER(*sem, val);
+}
+
+static inline void init_MUTEX(struct semaphore *sem)
+{
+ sema_init(sem, 1);
+}
+
+static inline void init_MUTEX_LOCKED(struct semaphore *sem)
+{
+ sema_init(sem, 0);
+}
+
+asmlinkage void __down(struct semaphore *sem);
+asmlinkage int __down_interruptible(struct semaphore *sem);
+asmlinkage int __down_trylock(struct semaphore *sem);
+asmlinkage void __up(struct semaphore *sem);
+
+extern spinlock_t semaphore_wake_lock;
+
+/*
+ * This is ugly, but we want the default case to fall through.
+ * "down_failed" is a special asm handler that calls the C
+ * routine that actually waits.
+ */
+static inline void down(struct semaphore *sem)
+{
+ might_sleep();
+ if (atomic_dec_return(&sem->count) < 0)
+ __down(sem);
+}
+
+static inline int down_interruptible(struct semaphore *sem)
+{
+ int ret = 0;
+
+ might_sleep();
+ if (atomic_dec_return(&sem->count) < 0)
+ ret = __down_interruptible(sem);
+ return (ret);
+}
+
+static inline int down_trylock(struct semaphore *sem)
+{
+ int ret = 0;
+
+ if (atomic_dec_return(&sem->count) < 0)
+ ret = __down_trylock(sem);
+ return ret;
+}
+
+/*
+ * Note! This is subtle. We jump to wake people up only if
+ * the semaphore was negative (== somebody was waiting on it).
+ * The default case (no contention) will result in NO
+ * jumps for both down() and up().
+ */
+static inline void up(struct semaphore *sem)
+{
+ if (atomic_inc_return(&sem->count) <= 0)
+ __up(sem);
+}
+
+#endif /* __ASSEMBLY__ */
+#endif /* _BFIN_SEMAPHORE_H */
diff --git a/include/asm-blackfin/sembuf.h b/include/asm-blackfin/sembuf.h
new file mode 100644
index 0000000..18deb5c
--- /dev/null
+++ b/include/asm-blackfin/sembuf.h
@@ -0,0 +1,25 @@
+#ifndef _BFIN_SEMBUF_H
+#define _BFIN_SEMBUF_H
+
+/*
+ * The semid64_ds structure for bfin architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct semid64_ds {
+ struct ipc64_perm sem_perm; /* permissions .. see ipc.h */
+ __kernel_time_t sem_otime; /* last semop time */
+ unsigned long __unused1;
+ __kernel_time_t sem_ctime; /* last change time */
+ unsigned long __unused2;
+ unsigned long sem_nsems; /* no. of semaphores in array */
+ unsigned long __unused3;
+ unsigned long __unused4;
+};
+
+#endif /* _BFIN_SEMBUF_H */
diff --git a/include/asm-blackfin/setup.h b/include/asm-blackfin/setup.h
new file mode 100644
index 0000000..01c8c6c
--- /dev/null
+++ b/include/asm-blackfin/setup.h
@@ -0,0 +1,17 @@
+/*
+** asm/setup.h -- Definition of the Linux/bfin setup information
+**
+** This file is subject to the terms and conditions of the GNU General Public
+** License. See the file COPYING in the main directory of this archive
+** for more details.
+**
+** Copyright Lineo, Inc 2001 Tony Kou
+**
+*/
+
+#ifndef _BFIN_SETUP_H
+#define _BFIN_SETUP_H
+
+#define COMMAND_LINE_SIZE 512
+
+#endif /* _BFIN_SETUP_H */
diff --git a/include/asm-blackfin/shmbuf.h b/include/asm-blackfin/shmbuf.h
new file mode 100644
index 0000000..6124363
--- /dev/null
+++ b/include/asm-blackfin/shmbuf.h
@@ -0,0 +1,42 @@
+#ifndef _BFIN_SHMBUF_H
+#define _BFIN_SHMBUF_H
+
+/*
+ * The shmid64_ds structure for bfin architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct shmid64_ds {
+ struct ipc64_perm shm_perm; /* operation perms */
+ size_t shm_segsz; /* size of segment (bytes) */
+ __kernel_time_t shm_atime; /* last attach time */
+ unsigned long __unused1;
+ __kernel_time_t shm_dtime; /* last detach time */
+ unsigned long __unused2;
+ __kernel_time_t shm_ctime; /* last change time */
+ unsigned long __unused3;
+ __kernel_pid_t shm_cpid; /* pid of creator */
+ __kernel_pid_t shm_lpid; /* pid of last operator */
+ unsigned long shm_nattch; /* no. of current attaches */
+ unsigned long __unused4;
+ unsigned long __unused5;
+};
+
+struct shminfo64 {
+ unsigned long shmmax;
+ unsigned long shmmin;
+ unsigned long shmmni;
+ unsigned long shmseg;
+ unsigned long shmall;
+ unsigned long __unused1;
+ unsigned long __unused2;
+ unsigned long __unused3;
+ unsigned long __unused4;
+};
+
+#endif /* _BFIN_SHMBUF_H */
diff --git a/include/asm-blackfin/shmparam.h b/include/asm-blackfin/shmparam.h
new file mode 100644
index 0000000..3c03906
--- /dev/null
+++ b/include/asm-blackfin/shmparam.h
@@ -0,0 +1,6 @@
+#ifndef _BFIN_SHMPARAM_H
+#define _BFIN_SHMPARAM_H
+
+#define SHMLBA PAGE_SIZE /* attach addr a multiple of this */
+
+#endif /* _BFIN_SHMPARAM_H */
diff --git a/include/asm-blackfin/sigcontext.h b/include/asm-blackfin/sigcontext.h
new file mode 100644
index 0000000..ce00b03
--- /dev/null
+++ b/include/asm-blackfin/sigcontext.h
@@ -0,0 +1,55 @@
+#ifndef _ASM_BLACKFIN_SIGCONTEXT_H
+#define _ASM_BLACKFIN_SIGCONTEXT_H
+
+/* Add new entries at the end of the structure only. */
+struct sigcontext {
+ unsigned long sc_r0;
+ unsigned long sc_r1;
+ unsigned long sc_r2;
+ unsigned long sc_r3;
+ unsigned long sc_r4;
+ unsigned long sc_r5;
+ unsigned long sc_r6;
+ unsigned long sc_r7;
+ unsigned long sc_p0;
+ unsigned long sc_p1;
+ unsigned long sc_p2;
+ unsigned long sc_p3;
+ unsigned long sc_p4;
+ unsigned long sc_p5;
+ unsigned long sc_usp;
+ unsigned long sc_a0w;
+ unsigned long sc_a1w;
+ unsigned long sc_a0x;
+ unsigned long sc_a1x;
+ unsigned long sc_astat;
+ unsigned long sc_rets;
+ unsigned long sc_pc;
+ unsigned long sc_retx;
+ unsigned long sc_fp;
+ unsigned long sc_i0;
+ unsigned long sc_i1;
+ unsigned long sc_i2;
+ unsigned long sc_i3;
+ unsigned long sc_m0;
+ unsigned long sc_m1;
+ unsigned long sc_m2;
+ unsigned long sc_m3;
+ unsigned long sc_l0;
+ unsigned long sc_l1;
+ unsigned long sc_l2;
+ unsigned long sc_l3;
+ unsigned long sc_b0;
+ unsigned long sc_b1;
+ unsigned long sc_b2;
+ unsigned long sc_b3;
+ unsigned long sc_lc0;
+ unsigned long sc_lc1;
+ unsigned long sc_lt0;
+ unsigned long sc_lt1;
+ unsigned long sc_lb0;
+ unsigned long sc_lb1;
+ unsigned long sc_seqstat;
+};
+
+#endif
diff --git a/include/asm-blackfin/siginfo.h b/include/asm-blackfin/siginfo.h
new file mode 100644
index 0000000..eca4565
--- /dev/null
+++ b/include/asm-blackfin/siginfo.h
@@ -0,0 +1,35 @@
+#ifndef _BFIN_SIGINFO_H
+#define _BFIN_SIGINFO_H
+
+#include <linux/types.h>
+#include <asm-generic/siginfo.h>
+
+#define UID16_SIGINFO_COMPAT_NEEDED
+
+#define si_uid16 _sifields._kill._uid
+
+#define ILL_ILLPARAOP (__SI_FAULT|2) /* illegal opcode combine ********** */
+#define ILL_ILLEXCPT (__SI_FAULT|4) /* unrecoverable exception ********** */
+#define ILL_CPLB_VI (__SI_FAULT|9) /* D/I CPLB protect violation ******** */
+#define ILL_CPLB_MISS (__SI_FAULT|10) /* D/I CPLB miss ******** */
+#define ILL_CPLB_MULHIT (__SI_FAULT|11) /* D/I CPLB multiple hit ******** */
+
+/*
+ * SIGBUS si_codes
+ */
+#define BUS_OPFETCH (__SI_FAULT|4) /* error from instruction fetch ******** */
+
+/*
+ * SIGTRAP si_codes
+ */
+#define TRAP_STEP (__SI_FAULT|1) /* single-step breakpoint************* */
+#define TRAP_TRACEFLOW (__SI_FAULT|2) /* trace buffer overflow ************* */
+#define TRAP_WATCHPT (__SI_FAULT|3) /* watchpoint match ************* */
+#define TRAP_ILLTRAP (__SI_FAULT|4) /* illegal trap ************* */
+
+/*
+ * SIGSEGV si_codes
+ */
+#define SEGV_STACKFLOW (__SI_FAULT|3) /* stack overflow */
+
+#endif
diff --git a/include/asm-blackfin/signal.h b/include/asm-blackfin/signal.h
new file mode 100644
index 0000000..0250429
--- /dev/null
+++ b/include/asm-blackfin/signal.h
@@ -0,0 +1,160 @@
+#ifndef _BLACKFIN_SIGNAL_H
+#define _BLACKFIN_SIGNAL_H
+
+#include <linux/types.h>
+
+/* Avoid too many header ordering problems. */
+struct siginfo;
+
+#ifdef __KERNEL__
+/* Most things should be clean enough to redefine this at will, if care
+ is taken to make libc match. */
+
+#define _NSIG 64
+#define _NSIG_BPW 32
+#define _NSIG_WORDS (_NSIG / _NSIG_BPW)
+
+typedef unsigned long old_sigset_t; /* at least 32 bits */
+
+typedef struct {
+ unsigned long sig[_NSIG_WORDS];
+} sigset_t;
+
+#else
+/* Here we must cater to libcs that poke about in kernel headers. */
+
+#define NSIG 32
+typedef unsigned long sigset_t;
+
+#endif /* __KERNEL__ */
+
+#define SIGHUP 1
+#define SIGINT 2
+#define SIGQUIT 3
+#define SIGILL 4
+#define SIGTRAP 5
+#define SIGABRT 6
+#define SIGIOT 6
+#define SIGBUS 7
+#define SIGFPE 8
+#define SIGKILL 9
+#define SIGUSR1 10
+#define SIGSEGV 11
+#define SIGUSR2 12
+#define SIGPIPE 13
+#define SIGALRM 14
+#define SIGTERM 15
+#define SIGSTKFLT 16
+#define SIGCHLD 17
+#define SIGCONT 18
+#define SIGSTOP 19
+#define SIGTSTP 20
+#define SIGTTIN 21
+#define SIGTTOU 22
+#define SIGURG 23
+#define SIGXCPU 24
+#define SIGXFSZ 25
+#define SIGVTALRM 26
+#define SIGPROF 27
+#define SIGWINCH 28
+#define SIGIO 29
+#define SIGPOLL SIGIO
+/*
+#define SIGLOST 29
+*/
+#define SIGPWR 30
+#define SIGSYS 31
+#define SIGUNUSED 31
+
+/* These should not be considered constants from userland. */
+#define SIGRTMIN 32
+#define SIGRTMAX _NSIG
+
+/*
+ * SA_FLAGS values:
+ *
+ * SA_ONSTACK indicates that a registered stack_t will be used.
+ * SA_INTERRUPT is a no-op, but left due to historical reasons. Use the
+ * SA_RESTART flag to get restarting signals (which were the default long ago)
+ * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
+ * SA_RESETHAND clears the handler when the signal is delivered.
+ * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
+ * SA_NODEFER prevents the current signal from being masked in the handler.
+ *
+ * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
+ * Unix names RESETHAND and NODEFER respectively.
+ */
+#define SA_NOCLDSTOP 0x00000001
+#define SA_NOCLDWAIT 0x00000002 /* not supported yet */
+#define SA_SIGINFO 0x00000004
+#define SA_ONSTACK 0x08000000
+#define SA_RESTART 0x10000000
+#define SA_NODEFER 0x40000000
+#define SA_RESETHAND 0x80000000
+
+#define SA_NOMASK SA_NODEFER
+#define SA_ONESHOT SA_RESETHAND
+
+/*
+ * sigaltstack controls
+ */
+#define SS_ONSTACK 1
+#define SS_DISABLE 2
+
+#define MINSIGSTKSZ 2048
+#define SIGSTKSZ 8192
+
+#include <asm-generic/signal.h>
+
+#ifdef __KERNEL__
+struct old_sigaction {
+ __sighandler_t sa_handler;
+ old_sigset_t sa_mask;
+ unsigned long sa_flags;
+ void (*sa_restorer) (void);
+};
+
+struct sigaction {
+ __sighandler_t sa_handler;
+ unsigned long sa_flags;
+ void (*sa_restorer) (void);
+ sigset_t sa_mask; /* mask last for extensibility */
+};
+
+struct k_sigaction {
+ struct sigaction sa;
+};
+#else
+/* Here we must cater to libcs that poke about in kernel headers. */
+
+struct sigaction {
+ union {
+ __sighandler_t _sa_handler;
+ void (*_sa_sigaction) (int, struct siginfo *, void *);
+ } _u;
+ sigset_t sa_mask;
+ unsigned long sa_flags;
+ void (*sa_restorer) (void);
+};
+
+#define sa_handler _u._sa_handler
+#define sa_sigaction _u._sa_sigaction
+
+#endif /* __KERNEL__ */
+
+typedef struct sigaltstack {
+ void *ss_sp;
+ int ss_flags;
+ size_t ss_size;
+} stack_t;
+
+#ifdef __KERNEL__
+
+#include <asm/sigcontext.h>
+#undef __HAVE_ARCH_SIG_BITOPS
+
+#define ptrace_signal_deliver(regs, cookie) do { } while (0)
+
+#endif /* __KERNEL__ */
+
+#endif /* _BLACKFIN_SIGNAL_H */
diff --git a/include/asm-blackfin/socket.h b/include/asm-blackfin/socket.h
new file mode 100644
index 0000000..5213c96
--- /dev/null
+++ b/include/asm-blackfin/socket.h
@@ -0,0 +1,53 @@
+#ifndef _ASM_SOCKET_H
+#define _ASM_SOCKET_H
+
+#include <asm/sockios.h>
+
+/* For setsockoptions(2) */
+#define SOL_SOCKET 1
+
+#define SO_DEBUG 1
+#define SO_REUSEADDR 2
+#define SO_TYPE 3
+#define SO_ERROR 4
+#define SO_DONTROUTE 5
+#define SO_BROADCAST 6
+#define SO_SNDBUF 7
+#define SO_RCVBUF 8
+#define SO_SNDBUFFORCE 32
+#define SO_RCVBUFFORCE 33
+#define SO_KEEPALIVE 9
+#define SO_OOBINLINE 10
+#define SO_NO_CHECK 11
+#define SO_PRIORITY 12
+#define SO_LINGER 13
+#define SO_BSDCOMPAT 14
+/* To add :#define SO_REUSEPORT 15 */
+#define SO_PASSCRED 16
+#define SO_PEERCRED 17
+#define SO_RCVLOWAT 18
+#define SO_SNDLOWAT 19
+#define SO_RCVTIMEO 20
+#define SO_SNDTIMEO 21
+
+/* Security levels - as per NRL IPv6 - don't actually do anything */
+#define SO_SECURITY_AUTHENTICATION 22
+#define SO_SECURITY_ENCRYPTION_TRANSPORT 23
+#define SO_SECURITY_ENCRYPTION_NETWORK 24
+
+#define SO_BINDTODEVICE 25
+
+/* Socket filtering */
+#define SO_ATTACH_FILTER 26
+#define SO_DETACH_FILTER 27
+
+#define SO_PEERNAME 28
+#define SO_TIMESTAMP 29
+#define SCM_TIMESTAMP SO_TIMESTAMP
+
+#define SO_ACCEPTCONN 30
+#define SO_PEERSEC 31
+#define SO_PASSSEC 34
+#define SO_TIMESTAMPNS 35
+#define SCM_TIMESTAMPNS SO_TIMESTAMPNS
+#endif /* _ASM_SOCKET_H */
diff --git a/include/asm-blackfin/sockios.h b/include/asm-blackfin/sockios.h
new file mode 100644
index 0000000..426b89b
--- /dev/null
+++ b/include/asm-blackfin/sockios.h
@@ -0,0 +1,13 @@
+#ifndef __ARCH_BFIN_SOCKIOS__
+#define __ARCH_BFIN_SOCKIOS__
+
+/* Socket-level I/O control calls. */
+#define FIOSETOWN 0x8901
+#define SIOCSPGRP 0x8902
+#define FIOGETOWN 0x8903
+#define SIOCGPGRP 0x8904
+#define SIOCATMARK 0x8905
+#define SIOCGSTAMP 0x8906 /* Get stamp (timeval) */
+#define SIOCGSTAMPNS 0x8907 /* Get stamp (timespec) */
+
+#endif /* __ARCH_BFIN_SOCKIOS__ */
diff --git a/include/asm-blackfin/spinlock.h b/include/asm-blackfin/spinlock.h
new file mode 100644
index 0000000..64e908a
--- /dev/null
+++ b/include/asm-blackfin/spinlock.h
@@ -0,0 +1,6 @@
+#ifndef __BFIN_SPINLOCK_H
+#define __BFIN_SPINLOCK_H
+
+#error blackfin architecture does not support SMP spin lock yet
+
+#endif
diff --git a/include/asm-blackfin/stat.h b/include/asm-blackfin/stat.h
new file mode 100644
index 0000000..d2b6f11
--- /dev/null
+++ b/include/asm-blackfin/stat.h
@@ -0,0 +1,63 @@
+#ifndef _BFIN_STAT_H
+#define _BFIN_STAT_H
+
+struct stat {
+ unsigned short st_dev;
+ unsigned short __pad1;
+ unsigned long st_ino;
+ unsigned short st_mode;
+ unsigned short st_nlink;
+ unsigned short st_uid;
+ unsigned short st_gid;
+ unsigned short st_rdev;
+ unsigned short __pad2;
+ unsigned long st_size;
+ unsigned long st_blksize;
+ unsigned long st_blocks;
+ unsigned long st_atime;
+ unsigned long __unused1;
+ unsigned long st_mtime;
+ unsigned long __unused2;
+ unsigned long st_ctime;
+ unsigned long __unused3;
+ unsigned long __unused4;
+ unsigned long __unused5;
+};
+
+/* This matches struct stat64 in glibc2.1, hence the absolutely
+ * insane amounts of padding around dev_t's.
+ */
+struct stat64 {
+ unsigned long long st_dev;
+ unsigned char __pad1[4];
+
+#define STAT64_HAS_BROKEN_ST_INO 1
+ unsigned long __st_ino;
+
+ unsigned int st_mode;
+ unsigned int st_nlink;
+
+ unsigned long st_uid;
+ unsigned long st_gid;
+
+ unsigned long long st_rdev;
+ unsigned char __pad2[4];
+
+ long long st_size;
+ unsigned long st_blksize;
+
+ long long st_blocks; /* Number 512-byte blocks allocated. */
+
+ unsigned long st_atime;
+ unsigned long st_atime_nsec;
+
+ unsigned long st_mtime;
+ unsigned long st_mtime_nsec;
+
+ unsigned long st_ctime;
+ unsigned long st_ctime_nsec;
+
+ unsigned long long st_ino;
+};
+
+#endif /* _BFIN_STAT_H */
diff --git a/include/asm-blackfin/statfs.h b/include/asm-blackfin/statfs.h
new file mode 100644
index 0000000..3506720
--- /dev/null
+++ b/include/asm-blackfin/statfs.h
@@ -0,0 +1,6 @@
+#ifndef _BFIN_STATFS_H
+#define _BFIN_STATFS_H
+
+#include <asm-generic/statfs.h>
+
+#endif /* _BFIN_STATFS_H */
diff --git a/include/asm-blackfin/string.h b/include/asm-blackfin/string.h
new file mode 100644
index 0000000..6f1eb7d
--- /dev/null
+++ b/include/asm-blackfin/string.h
@@ -0,0 +1,104 @@
+#ifndef _BLACKFIN_STRING_H_
+#define _BLACKFIN_STRING_H_
+
+#ifdef __KERNEL__ /* only set these up for kernel code */
+
+#define __HAVE_ARCH_STRCPY
+extern inline char *strcpy(char *dest, const char *src)
+{
+ char *xdest = dest;
+ char temp = 0;
+
+ __asm__ __volatile__
+ ("1:\t%2 = B [%1++] (Z);\n\t"
+ "B [%0++] = %2;\n\t"
+ "CC = %2;\n\t"
+ "if cc jump 1b (bp);\n"
+ : "+&a" (dest), "+&a" (src), "=&d" (temp)
+ ::"memory", "CC");
+ return xdest;
+}
+
+#define __HAVE_ARCH_STRNCPY
+extern inline char *strncpy(char *dest, const char *src, size_t n)
+{
+ char *xdest = dest;
+ char temp = 0;
+
+ if (n == 0)
+ return xdest;
+
+ __asm__ __volatile__
+ ("1:\t%3 = B [%1++] (Z);\n\t"
+ "B [%0++] = %3;\n\t"
+ "CC = %3;\n\t"
+ "if ! cc jump 2f;\n\t"
+ "%2 += -1;\n\t"
+ "CC = %2 == 0;\n\t"
+ "if ! cc jump 1b (bp);\n"
+ "2:\n"
+ : "+&a" (dest), "+&a" (src), "+&da" (n), "=&d" (temp)
+ ::"memory", "CC");
+ return xdest;
+}
+
+#define __HAVE_ARCH_STRCMP
+extern inline int strcmp(const char *cs, const char *ct)
+{
+ char __res1, __res2;
+
+ __asm__
+ ("1:\t%2 = B[%0++] (Z);\n\t" /* get *cs */
+ "%3 = B[%1++] (Z);\n\t" /* get *ct */
+ "CC = %2 == %3;\n\t" /* compare a byte */
+ "if ! cc jump 2f;\n\t" /* not equal, break out */
+ "CC = %2;\n\t" /* at end of cs? */
+ "if cc jump 1b (bp);\n\t" /* no, keep going */
+ "jump.s 3f;\n" /* strings are equal */
+ "2:\t%2 = %2 - %3;\n" /* *cs - *ct */
+ "3:\n"
+ : "+&a" (cs), "+&a" (ct), "=&d" (__res1), "=&d" (__res2)
+ : : "CC");
+
+ return __res1;
+}
+
+#define __HAVE_ARCH_STRNCMP
+extern inline int strncmp(const char *cs, const char *ct, size_t count)
+{
+ char __res1, __res2;
+
+ if (!count)
+ return 0;
+ __asm__
+ ("1:\t%3 = B[%0++] (Z);\n\t" /* get *cs */
+ "%4 = B[%1++] (Z);\n\t" /* get *ct */
+ "CC = %3 == %4;\n\t" /* compare a byte */
+ "if ! cc jump 3f;\n\t" /* not equal, break out */
+ "CC = %3;\n\t" /* at end of cs? */
+ "if ! cc jump 4f;\n\t" /* yes, all done */
+ "%2 += -1;\n\t" /* no, adjust count */
+ "CC = %2 == 0;\n\t"
+ "if ! cc jump 1b;\n" /* more to do, keep going */
+ "2:\t%3 = 0;\n\t" /* strings are equal */
+ "jump.s 4f;\n"
+ "3:\t%3 = %3 - %4;\n" /* *cs - *ct */
+ "4:"
+ : "+&a" (cs), "+&a" (ct), "+&da" (count), "=&d" (__res1), "=&d" (__res2)
+ : : "CC");
+ return __res1;
+}
+
+#define __HAVE_ARCH_MEMSET
+extern void *memset(void *s, int c, size_t count);
+#define __HAVE_ARCH_MEMCPY
+extern void *memcpy(void *d, const void *s, size_t count);
+#define __HAVE_ARCH_MEMCMP
+extern int memcmp(const void *, const void *, __kernel_size_t);
+#define __HAVE_ARCH_MEMCHR
+extern void *memchr(const void *s, int c, size_t n);
+#define __HAVE_ARCH_MEMMOVE
+extern void *memmove(void *dest, const void *src, size_t count);
+
+#endif /*__KERNEL__*/
+#endif /* _BLACKFIN_STRING_H_ */
diff --git a/include/asm-blackfin/system.h b/include/asm-blackfin/system.h
new file mode 100644
index 0000000..758bac7
--- /dev/null
+++ b/include/asm-blackfin/system.h
@@ -0,0 +1,250 @@
+/*
+ * File: include/asm/system.h
+ * Based on:
+ * Author: Tony Kou (tonyko@lineo.ca)
+ * Copyright (c) 2002 Arcturus Networks Inc.
+ * (www.arcturusnetworks.com)
+ * Copyright (c) 2003 Metrowerks (www.metrowerks.com)
+ * Copyright (c) 2004 Analog Device Inc.
+ * Created: 25Jan2001 - Tony Kou
+ * Description: system.h include file
+ *
+ * Modified: 22Sep2006 - Robin Getz
+ * - move include blackfin.h down, so I can get access to
+ * irq functions in other include files.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.
+ * If not, write to the Free Software Foundation,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef _BLACKFIN_SYSTEM_H
+#define _BLACKFIN_SYSTEM_H
+
+#include <linux/linkage.h>
+#include <linux/compiler.h>
+
+/*
+ * Interrupt configuring macros.
+ */
+
+extern unsigned long irq_flags;
+
+#define local_irq_enable() do { \
+ __asm__ __volatile__ ( \
+ "sti %0;" \
+ ::"d"(irq_flags)); \
+} while (0)
+
+#define local_irq_disable() do { \
+ int _tmp_dummy; \
+ __asm__ __volatile__ ( \
+ "cli %0;" \
+ :"=d" (_tmp_dummy):); \
+} while (0)
+
+#if defined(ANOMALY_05000244) && defined (CONFIG_BLKFIN_CACHE)
+#define idle_with_irq_disabled() do { \
+ __asm__ __volatile__ ( \
+ "nop; nop;\n" \
+ ".align 8;\n" \
+ "sti %0; idle;\n" \
+ ::"d" (irq_flags)); \
+} while (0)
+#else
+#define idle_with_irq_disabled() do { \
+ __asm__ __volatile__ ( \
+ ".align 8;\n" \
+ "sti %0; idle;\n" \
+ ::"d" (irq_flags)); \
+} while (0)
+#endif
+
+#ifdef CONFIG_DEBUG_HWERR
+#define __save_and_cli(x) do { \
+ __asm__ __volatile__ ( \
+ "cli %0;\n\tsti %1;" \
+ :"=&d"(x): "d" (0x3F)); \
+} while (0)
+#else
+#define __save_and_cli(x) do { \
+ __asm__ __volatile__ ( \
+ "cli %0;" \
+ :"=&d"(x):); \
+} while (0)
+#endif
+
+#define local_save_flags(x) asm volatile ("cli %0;" \
+ "sti %0;" \
+ :"=d"(x):);
+
+#ifdef CONFIG_DEBUG_HWERR
+#define irqs_enabled_from_flags(x) (((x) & ~0x3f) != 0)
+#else
+#define irqs_enabled_from_flags(x) ((x) != 0x1f)
+#endif
+
+#define local_irq_restore(x) do { \
+ if (irqs_enabled_from_flags(x)) \
+ local_irq_enable (); \
+} while (0)
+
+/* For spinlocks etc */
+#define local_irq_save(x) __save_and_cli(x)
+
+#define irqs_disabled() \
+({ \
+ unsigned long flags; \
+ local_save_flags(flags); \
+ !irqs_enabled_from_flags(flags); \
+})
+
+/*
+ * Force strict CPU ordering.
+ */
+#define nop() asm volatile ("nop;\n\t"::)
+#define mb() asm volatile ("" : : :"memory")
+#define rmb() asm volatile ("" : : :"memory")
+#define wmb() asm volatile ("" : : :"memory")
+#define set_rmb(var, value) do { (void) xchg(&var, value); } while (0)
+#define set_mb(var, value) set_rmb(var, value)
+#define set_wmb(var, value) do { var = value; wmb(); } while (0)
+
+#define read_barrier_depends() do { } while(0)
+
+#ifdef CONFIG_SMP
+#define smp_mb() mb()
+#define smp_rmb() rmb()
+#define smp_wmb() wmb()
+#define smp_read_barrier_depends() read_barrier_depends()
+#else
+#define smp_mb() barrier()
+#define smp_rmb() barrier()
+#define smp_wmb() barrier()
+#define smp_read_barrier_depends() do { } while(0)
+#endif
+
+#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
+#define tas(ptr) ((void)xchg((ptr),1))
+
+struct __xchg_dummy {
+ unsigned long a[100];
+};
+#define __xg(x) ((volatile struct __xchg_dummy *)(x))
+
+static inline unsigned long __xchg(unsigned long x, volatile void *ptr,
+ int size)
+{
+ unsigned long tmp = 0;
+ unsigned long flags = 0;
+
+ local_irq_save(flags);
+
+ switch (size) {
+ case 1:
+ __asm__ __volatile__
+ ("%0 = b%2 (z);\n\t"
+ "b%2 = %1;\n\t"
+ : "=&d" (tmp) : "d" (x), "m" (*__xg(ptr)) : "memory");
+ break;
+ case 2:
+ __asm__ __volatile__
+ ("%0 = w%2 (z);\n\t"
+ "w%2 = %1;\n\t"
+ : "=&d" (tmp) : "d" (x), "m" (*__xg(ptr)) : "memory");
+ break;
+ case 4:
+ __asm__ __volatile__
+ ("%0 = %2;\n\t"
+ "%2 = %1;\n\t"
+ : "=&d" (tmp) : "d" (x), "m" (*__xg(ptr)) : "memory");
+ break;
+ }
+ local_irq_restore(flags);
+ return tmp;
+}
+
+/*
+ * Atomic compare and exchange. Compare OLD with MEM, if identical,
+ * store NEW in MEM. Return the initial value in MEM. Success is
+ * indicated by comparing RETURN with OLD.
+ */
+static inline unsigned long __cmpxchg(volatile void *ptr, unsigned long old,
+ unsigned long new, int size)
+{
+ unsigned long tmp = 0;
+ unsigned long flags = 0;
+
+ local_irq_save(flags);
+
+ switch (size) {
+ case 1:
+ __asm__ __volatile__
+ ("%0 = b%3 (z);\n\t"
+ "CC = %1 == %0;\n\t"
+ "IF !CC JUMP 1f;\n\t"
+ "b%3 = %2;\n\t"
+ "1:\n\t"
+ : "=&d" (tmp) : "d" (old), "d" (new), "m" (*__xg(ptr)) : "memory");
+ break;
+ case 2:
+ __asm__ __volatile__
+ ("%0 = w%3 (z);\n\t"
+ "CC = %1 == %0;\n\t"
+ "IF !CC JUMP 1f;\n\t"
+ "w%3 = %2;\n\t"
+ "1:\n\t"
+ : "=&d" (tmp) : "d" (old), "d" (new), "m" (*__xg(ptr)) : "memory");
+ break;
+ case 4:
+ __asm__ __volatile__
+ ("%0 = %3;\n\t"
+ "CC = %1 == %0;\n\t"
+ "IF !CC JUMP 1f;\n\t"
+ "%3 = %2;\n\t"
+ "1:\n\t"
+ : "=&d" (tmp) : "d" (old), "d" (new), "m" (*__xg(ptr)) : "memory");
+ break;
+ }
+ local_irq_restore(flags);
+ return tmp;
+}
+
+#define cmpxchg(ptr,o,n)\
+ ((__typeof__(*(ptr)))__cmpxchg((ptr),(unsigned long)(o),\
+ (unsigned long)(n),sizeof(*(ptr))))
+
+#define prepare_to_switch() do { } while(0)
+
+/*
+ * switch_to(n) should switch tasks to task ptr, first checking that
+ * ptr isn't the current task, in which case it does nothing.
+ */
+
+#include <asm/blackfin.h>
+
+asmlinkage struct task_struct *resume(struct task_struct *prev, struct task_struct *next);
+
+#define switch_to(prev,next,last) \
+do { \
+ memcpy (&prev->thread_info->l1_task_info, L1_SCRATCH_TASK_INFO, \
+ sizeof *L1_SCRATCH_TASK_INFO); \
+ memcpy (L1_SCRATCH_TASK_INFO, &next->thread_info->l1_task_info, \
+ sizeof *L1_SCRATCH_TASK_INFO); \
+ (last) = resume (prev, next); \
+} while (0)
+
+#endif /* _BLACKFIN_SYSTEM_H */
diff --git a/include/asm-blackfin/termbits.h b/include/asm-blackfin/termbits.h
new file mode 100644
index 0000000..2fd9dab
--- /dev/null
+++ b/include/asm-blackfin/termbits.h
@@ -0,0 +1,184 @@
+#ifndef __ARCH_BFIN_TERMBITS_H__
+#define __ARCH_BFIN_TERMBITS_H__
+
+#include <linux/posix_types.h>
+
+typedef unsigned char cc_t;
+typedef unsigned int speed_t;
+typedef unsigned int tcflag_t;
+
+#define NCCS 19
+struct termios {
+ tcflag_t c_iflag; /* input mode flags */
+ tcflag_t c_oflag; /* output mode flags */
+ tcflag_t c_cflag; /* control mode flags */
+ tcflag_t c_lflag; /* local mode flags */
+ cc_t c_line; /* line discipline */
+ cc_t c_cc[NCCS]; /* control characters */
+};
+
+struct ktermios {
+ tcflag_t c_iflag; /* input mode flags */
+ tcflag_t c_oflag; /* output mode flags */
+ tcflag_t c_cflag; /* control mode flags */
+ tcflag_t c_lflag; /* local mode flags */
+ cc_t c_line; /* line discipline */
+ cc_t c_cc[NCCS]; /* control characters */
+ speed_t c_ispeed; /* input speed */
+ speed_t c_ospeed; /* output speed */
+};
+
+/* c_cc characters */
+#define VINTR 0
+#define VQUIT 1
+#define VERASE 2
+#define VKILL 3
+#define VEOF 4
+#define VTIME 5
+#define VMIN 6
+#define VSWTC 7
+#define VSTART 8
+#define VSTOP 9
+#define VSUSP 10
+#define VEOL 11
+#define VREPRINT 12
+#define VDISCARD 13
+#define VWERASE 14
+#define VLNEXT 15
+#define VEOL2 16
+
+/* c_iflag bits */
+#define IGNBRK 0000001
+#define BRKINT 0000002
+#define IGNPAR 0000004
+#define PARMRK 0000010
+#define INPCK 0000020
+#define ISTRIP 0000040
+#define INLCR 0000100
+#define IGNCR 0000200
+#define ICRNL 0000400
+#define IUCLC 0001000
+#define IXON 0002000
+#define IXANY 0004000
+#define IXOFF 0010000
+#define IMAXBEL 0020000
+#define IUTF8 0040000
+
+/* c_oflag bits */
+#define OPOST 0000001
+#define OLCUC 0000002
+#define ONLCR 0000004
+#define OCRNL 0000010
+#define ONOCR 0000020
+#define ONLRET 0000040
+#define OFILL 0000100
+#define OFDEL 0000200
+#define NLDLY 0000400
+#define NL0 0000000
+#define NL1 0000400
+#define CRDLY 0003000
+#define CR0 0000000
+#define CR1 0001000
+#define CR2 0002000
+#define CR3 0003000
+#define TABDLY 0014000
+#define TAB0 0000000
+#define TAB1 0004000
+#define TAB2 0010000
+#define TAB3 0014000
+#define XTABS 0014000
+#define BSDLY 0020000
+#define BS0 0000000
+#define BS1 0020000
+#define VTDLY 0040000
+#define VT0 0000000
+#define VT1 0040000
+#define FFDLY 0100000
+#define FF0 0000000
+#define FF1 0100000
+
+/* c_cflag bit meaning */
+#define CBAUD 0010017
+#define B0 0000000 /* hang up */
+#define B50 0000001
+#define B75 0000002
+#define B110 0000003
+#define B134 0000004
+#define B150 0000005
+#define B200 0000006
+#define B300 0000007
+#define B600 0000010
+#define B1200 0000011
+#define B1800 0000012
+#define B2400 0000013
+#define B4800 0000014
+#define B9600 0000015
+#define B19200 0000016
+#define B38400 0000017
+#define EXTA B19200
+#define EXTB B38400
+#define CSIZE 0000060
+#define CS5 0000000
+#define CS6 0000020
+#define CS7 0000040
+#define CS8 0000060
+#define CSTOPB 0000100
+#define CREAD 0000200
+#define PARENB 0000400
+#define PARODD 0001000
+#define HUPCL 0002000
+#define CLOCAL 0004000
+#define CBAUDEX 0010000
+#define B57600 0010001
+#define B115200 0010002
+#define B230400 0010003
+#define B460800 0010004
+#define B500000 0010005
+#define B576000 0010006
+#define B921600 0010007
+#define B1000000 0010010
+#define B1152000 0010011
+#define B1500000 0010012
+#define B2000000 0010013
+#define B2500000 0010014
+#define B3000000 0010015
+#define B3500000 0010016
+#define B4000000 0010017
+#define CIBAUD 002003600000 /* input baud rate (not used) */
+#define CMSPAR 010000000000 /* mark or space (stick) parity */
+#define CRTSCTS 020000000000 /* flow control */
+
+/* c_lflag bits */
+#define ISIG 0000001
+#define ICANON 0000002
+#define XCASE 0000004
+#define ECHO 0000010
+#define ECHOE 0000020
+#define ECHOK 0000040
+#define ECHONL 0000100
+#define NOFLSH 0000200
+#define TOSTOP 0000400
+#define ECHOCTL 0001000
+#define ECHOPRT 0002000
+#define ECHOKE 0004000
+#define FLUSHO 0010000
+#define PENDIN 0040000
+#define IEXTEN 0100000
+
+/* tcflow() and TCXONC use these */
+#define TCOOFF 0
+#define TCOON 1
+#define TCIOFF 2
+#define TCION 3
+
+/* tcflush() and TCFLSH use these */
+#define TCIFLUSH 0
+#define TCOFLUSH 1
+#define TCIOFLUSH 2
+
+/* tcsetattr uses these */
+#define TCSANOW 0
+#define TCSADRAIN 1
+#define TCSAFLUSH 2
+
+#endif /* __ARCH_BFIN_TERMBITS_H__ */
diff --git a/include/asm-blackfin/termios.h b/include/asm-blackfin/termios.h
new file mode 100644
index 0000000..5c41478
--- /dev/null
+++ b/include/asm-blackfin/termios.h
@@ -0,0 +1,106 @@
+#ifndef __BFIN_TERMIOS_H__
+#define __BFIN_TERMIOS_H__
+
+#include <asm/termbits.h>
+#include <asm/ioctls.h>
+
+struct winsize {
+ unsigned short ws_row;
+ unsigned short ws_col;
+ unsigned short ws_xpixel;
+ unsigned short ws_ypixel;
+};
+
+#define NCC 8
+struct termio {
+ unsigned short c_iflag; /* input mode flags */
+ unsigned short c_oflag; /* output mode flags */
+ unsigned short c_cflag; /* control mode flags */
+ unsigned short c_lflag; /* local mode flags */
+ unsigned char c_line; /* line discipline */
+ unsigned char c_cc[NCC]; /* control characters */
+};
+
+/* modem lines */
+#define TIOCM_LE 0x001
+#define TIOCM_DTR 0x002
+#define TIOCM_RTS 0x004
+#define TIOCM_ST 0x008
+#define TIOCM_SR 0x010
+#define TIOCM_CTS 0x020
+#define TIOCM_CAR 0x040
+#define TIOCM_RNG 0x080
+#define TIOCM_DSR 0x100
+#define TIOCM_CD TIOCM_CAR
+#define TIOCM_RI TIOCM_RNG
+#define TIOCM_OUT1 0x2000
+#define TIOCM_OUT2 0x4000
+#define TIOCM_LOOP 0x8000
+
+/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
+
+/* line disciplines */
+#define N_TTY 0
+#define N_SLIP 1
+#define N_MOUSE 2
+#define N_PPP 3
+#define N_STRIP 4
+#define N_AX25 5
+#define N_X25 6 /* X.25 async */
+#define N_6PACK 7
+#define N_MASC 8 /* Reserved for Mobitex module <kaz@cafe.net> */
+#define N_R3964 9 /* Reserved for Simatic R3964 module */
+#define N_PROFIBUS_FDL 10 /* Reserved for Profibus <Dave@mvhi.com> */
+#define N_IRDA 11 /* Linux IR - http://irda.sourceforge.net/ */
+#define N_SMSBLOCK 12 /* SMS block mode - for talking to GSM data cards about SMS messages */
+#define N_HDLC 13 /* synchronous HDLC */
+#define N_SYNC_PPP 14 /* synchronous PPP */
+#define N_HCI 15 /* Bluetooth HCI UART */
+
+#ifdef __KERNEL__
+
+/* intr=^C quit=^\ erase=del kill=^U
+ eof=^D vtime=\0 vmin=\1 sxtc=\0
+ start=^Q stop=^S susp=^Z eol=\0
+ reprint=^R discard=^U werase=^W lnext=^V
+ eol2=\0
+*/
+#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
+
+/*
+ * Translate a "termio" structure into a "termios". Ugh.
+ */
+#define SET_LOW_TERMIOS_BITS(termios, termio, x) { \
+ unsigned short __tmp; \
+ get_user(__tmp,&(termio)->x); \
+ *(unsigned short *) &(termios)->x = __tmp; \
+}
+
+#define user_termio_to_kernel_termios(termios, termio) \
+({ \
+ SET_LOW_TERMIOS_BITS(termios, termio, c_iflag); \
+ SET_LOW_TERMIOS_BITS(termios, termio, c_oflag); \
+ SET_LOW_TERMIOS_BITS(termios, termio, c_cflag); \
+ SET_LOW_TERMIOS_BITS(termios, termio, c_lflag); \
+ copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \
+})
+
+/*
+ * Translate a "termios" structure into a "termio". Ugh.
+ */
+#define kernel_termios_to_user_termio(termio, termios) \
+({ \
+ put_user((termios)->c_iflag, &(termio)->c_iflag); \
+ put_user((termios)->c_oflag, &(termio)->c_oflag); \
+ put_user((termios)->c_cflag, &(termio)->c_cflag); \
+ put_user((termios)->c_lflag, &(termio)->c_lflag); \
+ put_user((termios)->c_line, &(termio)->c_line); \
+ copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \
+})
+
+#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios))
+#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios))
+
+#endif /* __KERNEL__ */
+
+#endif /* __BFIN_TERMIOS_H__ */
diff --git a/include/asm-blackfin/thread_info.h b/include/asm-blackfin/thread_info.h
new file mode 100644
index 0000000..fa8f08c
--- /dev/null
+++ b/include/asm-blackfin/thread_info.h
@@ -0,0 +1,143 @@
+/*
+ * File: include/asm-blackfin/thread_info.h
+ * Based on: include/asm-m68knommu/thread_info.h
+ * Author: LG Soft India
+ * Copyright (C) 2004-2005 Analog Devices Inc.
+ * Created: Tue Sep 21 2004
+ * Description: Blackfin low-level thread information
+ * Modified:
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.
+ * If not, write to the Free Software Foundation,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef _ASM_THREAD_INFO_H
+#define _ASM_THREAD_INFO_H
+
+#include <asm/page.h>
+#include <asm/entry.h>
+#include <asm/l1layout.h>
+#include <linux/compiler.h>
+
+#ifdef __KERNEL__
+
+/* Thread Align Mask to reach to the top of the stack
+ * for any process
+ */
+#define ALIGN_PAGE_MASK 0xffffe000
+
+#ifndef __ASSEMBLY__
+
+typedef unsigned long mm_segment_t;
+
+/*
+ * low level task data.
+ * If you change this, change the TI_* offsets below to match.
+ */
+
+struct thread_info {
+ struct task_struct *task; /* main task structure */
+ struct exec_domain *exec_domain; /* execution domain */
+ unsigned long flags; /* low level flags */
+ int cpu; /* cpu we're on */
+ int preempt_count; /* 0 => preemptable, <0 => BUG */
+ mm_segment_t addr_limit; /* address limit */
+ struct restart_block restart_block;
+ struct l1_scratch_task_info l1_task_info;
+};
+
+/*
+ * macros/functions for gaining access to the thread information structure
+ */
+#define INIT_THREAD_INFO(tsk) \
+{ \
+ .task = &tsk, \
+ .exec_domain = &default_exec_domain, \
+ .flags = 0, \
+ .cpu = 0, \
+ .preempt_count = 1, \
+ .restart_block = { \
+ .fn = do_no_restart_syscall, \
+ }, \
+}
+#define init_thread_info (init_thread_union.thread_info)
+#define init_stack (init_thread_union.stack)
+
+/*
+ * Size of kernel stack for each process. This must be a power of 2...
+ */
+#define THREAD_SIZE 8192 /* 2 pages */
+
+/* How to get the thread information struct from C */
+
+static inline struct thread_info *current_thread_info(void)
+ __attribute__ ((__const__));
+
+/* Given a task stack pointer, you can find it's task structure
+ * just by masking it to the 8K boundary.
+ */
+static inline struct thread_info *current_thread_info(void)
+{
+ struct thread_info *ti;
+ __asm__("%0 = sp;": "=&d"(ti):
+ );
+ return (struct thread_info *)((long)ti & ~8191UL);
+}
+
+/* thread information allocation */
+#define alloc_thread_info(tsk) ((struct thread_info *) \
+ __get_free_pages(GFP_KERNEL, 1))
+#define free_thread_info(ti) free_pages((unsigned long) (ti), 1)
+#endif /* __ASSEMBLY__ */
+
+/*
+ * Offsets in thread_info structure, used in assembly code
+ */
+#define TI_TASK 0
+#define TI_EXECDOMAIN 4
+#define TI_FLAGS 8
+#define TI_CPU 12
+#define TI_PREEMPT 16
+
+#define PREEMPT_ACTIVE 0x4000000
+
+/*
+ * thread information flag bit numbers
+ */
+#define TIF_SYSCALL_TRACE 0 /* syscall trace active */
+#define TIF_NOTIFY_RESUME 1 /* resumption notification requested */
+#define TIF_SIGPENDING 2 /* signal pending */
+#define TIF_NEED_RESCHED 3 /* rescheduling necessary */
+#define TIF_POLLING_NRFLAG 4 /* true if poll_idle() is polling
+ TIF_NEED_RESCHED */
+#define TIF_MEMDIE 5
+#define TIF_RESTORE_SIGMASK 6 /* restore signal mask in do_signal() */
+#define TIF_FREEZE 7 /* is freezing for suspend */
+
+/* as above, but as bit values */
+#define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE)
+#define _TIF_NOTIFY_RESUME (1<<TIF_NOTIFY_RESUME)
+#define _TIF_SIGPENDING (1<<TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED (1<<TIF_NEED_RESCHED)
+#define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG)
+#define _TIF_RESTORE_SIGMASK (1<<TIF_RESTORE_SIGMASK)
+#define _TIF_FREEZE (1<<TIF_FREEZE)
+
+#define _TIF_WORK_MASK 0x0000FFFE /* work to do on interrupt/exception return */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_THREAD_INFO_H */
diff --git a/include/asm-blackfin/timex.h b/include/asm-blackfin/timex.h
new file mode 100644
index 0000000..8285901
--- /dev/null
+++ b/include/asm-blackfin/timex.h
@@ -0,0 +1,18 @@
+/* blackfin architecture timex specifications: Lineo Inc. 2001
+ *
+ * Based on: include/asm-m68knommu/timex.h
+ */
+
+#ifndef _ASMBLACKFIN_TIMEX_H
+#define _ASMBLACKFIN_TIMEX_H
+
+#define CLOCK_TICK_RATE 1000000 /* Underlying HZ */
+
+typedef unsigned long cycles_t;
+
+static inline cycles_t get_cycles(void)
+{
+ return 0;
+}
+
+#endif
diff --git a/include/asm-blackfin/tlb.h b/include/asm-blackfin/tlb.h
new file mode 100644
index 0000000..89a12ee
--- /dev/null
+++ b/include/asm-blackfin/tlb.h
@@ -0,0 +1,16 @@
+#ifndef _BLACKFIN_TLB_H
+#define _BLACKFIN_TLB_H
+
+#define tlb_start_vma(tlb, vma) do { } while (0)
+#define tlb_end_vma(tlb, vma) do { } while (0)
+#define __tlb_remove_tlb_entry(tlb, ptep, address) do { } while (0)
+
+/*
+ * .. because we flush the whole mm when it
+ * fills up.
+ */
+#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm)
+
+#include <asm-generic/tlb.h>
+
+#endif /* _BLACKFIN_TLB_H */
diff --git a/include/asm-blackfin/tlbflush.h b/include/asm-blackfin/tlbflush.h
new file mode 100644
index 0000000..10a07ba
--- /dev/null
+++ b/include/asm-blackfin/tlbflush.h
@@ -0,0 +1,62 @@
+#ifndef _BLACKFIN_TLBFLUSH_H
+#define _BLACKFIN_TLBFLUSH_H
+
+/*
+ * Copyright (C) 2000 Lineo, David McCullough <davidm@uclinux.org>
+ * Copyright (C) 2000-2002, Greg Ungerer <gerg@snapgear.com>
+ */
+
+#include <asm/setup.h>
+
+/*
+ * flush all user-space atc entries.
+ */
+static inline void __flush_tlb(void)
+{
+ BUG();
+}
+
+static inline void __flush_tlb_one(unsigned long addr)
+{
+ BUG();
+}
+
+#define flush_tlb() __flush_tlb()
+
+/*
+ * flush all atc entries (both kernel and user-space entries).
+ */
+static inline void flush_tlb_all(void)
+{
+ BUG();
+}
+
+static inline void flush_tlb_mm(struct mm_struct *mm)
+{
+ BUG();
+}
+
+static inline void flush_tlb_page(struct vm_area_struct *vma,
+ unsigned long addr)
+{
+ BUG();
+}
+
+static inline void flush_tlb_range(struct mm_struct *mm,
+ unsigned long start, unsigned long end)
+{
+ BUG();
+}
+
+static inline void flush_tlb_kernel_page(unsigned long addr)
+{
+ BUG();
+}
+
+static inline void flush_tlb_pgtables(struct mm_struct *mm,
+ unsigned long start, unsigned long end)
+{
+ BUG();
+}
+
+#endif
diff --git a/include/asm-blackfin/topology.h b/include/asm-blackfin/topology.h
new file mode 100644
index 0000000..acee239
--- /dev/null
+++ b/include/asm-blackfin/topology.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_BLACKFIN_TOPOLOGY_H
+#define _ASM_BLACKFIN_TOPOLOGY_H
+
+#include <asm-generic/topology.h>
+
+#endif /* _ASM_BLACKFIN_TOPOLOGY_H */
diff --git a/include/asm-blackfin/traps.h b/include/asm-blackfin/traps.h
new file mode 100644
index 0000000..fe365b1
--- /dev/null
+++ b/include/asm-blackfin/traps.h
@@ -0,0 +1,75 @@
+/*
+ * linux/include/asm/traps.h
+ *
+ * Copyright (C) 1993 Hamish Macdonald
+ *
+ * Lineo, Inc Jul 2001 Tony Kou
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _BFIN_TRAPS_H
+#define _BFIN_TRAPS_H
+
+#define VEC_SYS (0)
+#define VEC_EXCPT01 (1)
+#define VEC_EXCPT02 (2)
+#define VEC_EXCPT03 (3)
+#define VEC_EXCPT04 (4)
+#define VEC_EXCPT05 (5)
+#define VEC_EXCPT06 (6)
+#define VEC_EXCPT07 (7)
+#define VEC_EXCPT08 (8)
+#define VEC_EXCPT09 (9)
+#define VEC_EXCPT10 (10)
+#define VEC_EXCPT11 (11)
+#define VEC_EXCPT12 (12)
+#define VEC_EXCPT13 (13)
+#define VEC_EXCPT14 (14)
+#define VEC_EXCPT15 (15)
+#define VEC_STEP (16)
+#define VEC_OVFLOW (17)
+#define VEC_UNDEF_I (33)
+#define VEC_ILGAL_I (34)
+#define VEC_CPLB_VL (35)
+#define VEC_MISALI_D (36)
+#define VEC_UNCOV (37)
+#define VEC_CPLB_M (38)
+#define VEC_CPLB_MHIT (39)
+#define VEC_WATCH (40)
+#define VEC_ISTRU_VL (41) /*ADSP-BF535 only (MH) */
+#define VEC_MISALI_I (42)
+#define VEC_CPLB_I_VL (43)
+#define VEC_CPLB_I_M (44)
+#define VEC_CPLB_I_MHIT (45)
+#define VEC_ILL_RES (46) /* including unvalid supervisor mode insn */
+
+#ifndef __ASSEMBLY__
+
+#define HWC_x2 "System MMR Error\nAn error occurred due to an invalid access to an System MMR location\nPossible reason: a 32-bit register is accessed with a 16-bit instruction,\nor a 16-bit register is accessed with a 32-bit instruction.\n"
+#define HWC_x3 "External Memory Addressing Error\n"
+#define HWC_x12 "Performance Monitor Overflow\n"
+#define HWC_x18 "RAISE 5 instruction\n Software issued a RAISE 5 instruction to invoke the Hardware\n"
+#define HWC_default "Reserved\n"
+
+#define EXC_0x03 "Application stack overflow\n - Please increase the stack size of the application using elf2flt -s option,\n and/or reduce the stack use of the application.\n"
+#define EXC_0x10 "Single step\n - When the processor is in single step mode, every instruction\n generates an exception. Primarily used for debugging.\n"
+#define EXC_0x11 "Exception caused by a trace buffer full condition\n - The processor takes this exception when the trace\n buffer overflows (only when enabled by the Trace Unit Control register).\n"
+#define EXC_0x21 "Undefined instruction\n - May be used to emulate instructions that are not defined for\n a particular processor implementation.\n"
+#define EXC_0x22 "Illegal instruction combination\n - See section for multi-issue rules in the ADSP-BF53x Blackfin\n Processor Instruction Set Reference.\n"
+#define EXC_0x23 "Data access CPLB protection violation\n - Attempted read or write to Supervisor resource,\n or illegal data memory access. \n"
+#define EXC_0x24 "Data access misaligned address violation\n - Attempted misaligned data memory or data cache access.\n"
+#define EXC_0x25 "Unrecoverable event\n - For example, an exception generated while processing a previous exception.\n"
+#define EXC_0x26 "Data access CPLB miss\n - Used by the MMU to signal a CPLB miss on a data access.\n"
+#define EXC_0x27 "Data access multiple CPLB hits\n - More than one CPLB entry matches data fetch address.\n"
+#define EXC_0x28 "Program Sequencer Exception caused by an emulation watchpoint match\n - There is a watchpoint match, and one of the EMUSW\n bits in the Watchpoint Instruction Address Control register (WPIACTL) is set.\n"
+#define EXC_0x2A "Instruction fetch misaligned address violation\n - Attempted misaligned instruction cache fetch. On a misaligned instruction fetch exception,\n the return address provided in RETX is the destination address which is misaligned, rather than the address of the offending instruction.\n"
+#define EXC_0x2B "CPLB protection violation\n - Illegal instruction fetch access (memory protection violation).\n"
+#define EXC_0x2C "Instruction fetch CPLB miss\n - CPLB miss on an instruction fetch.\n"
+#define EXC_0x2D "Instruction fetch multiple CPLB hits\n - More than one CPLB entry matches instruction fetch address.\n"
+#define EXC_0x2E "Illegal use of supervisor resource\n - Attempted to use a Supervisor register or instruction from User mode.\n Supervisor resources are registers and instructions that are reserved\n for Supervisor use: Supervisor only registers, all MMRs, and Supervisor\n only instructions.\n"
+
+#endif /* __ASSEMBLY__ */
+#endif /* _BFIN_TRAPS_H */
diff --git a/include/asm-blackfin/types.h b/include/asm-blackfin/types.h
new file mode 100644
index 0000000..36f8dc8
--- /dev/null
+++ b/include/asm-blackfin/types.h
@@ -0,0 +1,66 @@
+#ifndef _BFIN_TYPES_H
+#define _BFIN_TYPES_H
+
+/*
+ * This file is never included by application software unless
+ * explicitly requested (e.g., via linux/types.h) in which case the
+ * application is Linux specific so (user-) name space pollution is
+ * not a major issue. However, for interoperability, libraries still
+ * need to be careful to avoid a name clashes.
+ */
+#ifndef __ASSEMBLY__
+
+typedef unsigned short umode_t;
+
+/*
+ * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the
+ * header files exported to user space
+ */
+
+typedef __signed__ char __s8;
+typedef unsigned char __u8;
+
+typedef __signed__ short __s16;
+typedef unsigned short __u16;
+
+typedef __signed__ int __s32;
+typedef unsigned int __u32;
+
+/* HK0617 -- Changes to unsigned long temporarily */
+#if defined(__GNUC__) && !defined(__STRICT_ANSI__)
+typedef __signed__ long long __s64;
+typedef unsigned long long __u64;
+#endif
+
+#endif /* __ASSEMBLY__ */
+/*
+ * These aren't exported outside the kernel to avoid name space clashes
+ */
+#ifdef __KERNEL__
+
+#define BITS_PER_LONG 32
+
+#ifndef __ASSEMBLY__
+
+typedef signed char s8;
+typedef unsigned char u8;
+
+typedef signed short s16;
+typedef unsigned short u16;
+
+typedef signed int s32;
+typedef unsigned int u32;
+
+typedef signed long long s64;
+typedef unsigned long long u64;
+
+/* Dma addresses are 32-bits wide. */
+
+typedef u32 dma_addr_t;
+typedef u64 dma64_addr_t;
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+#endif /* _BFIN_TYPES_H */
diff --git a/include/asm-blackfin/uaccess.h b/include/asm-blackfin/uaccess.h
new file mode 100644
index 0000000..bfcb679
--- /dev/null
+++ b/include/asm-blackfin/uaccess.h
@@ -0,0 +1,271 @@
+/* Changes made by Lineo Inc. May 2001
+ *
+ * Based on: include/asm-m68knommu/uaccess.h
+ */
+
+#ifndef __BLACKFIN_UACCESS_H
+#define __BLACKFIN_UACCESS_H
+
+/*
+ * User space memory access functions
+ */
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/string.h>
+
+#include <asm/segment.h>
+#ifndef CONFIG_NO_ACCESS_CHECK
+# include <asm/bfin-global.h>
+#endif
+
+#define get_ds() (KERNEL_DS)
+#define get_fs() (current_thread_info()->addr_limit)
+
+static inline void set_fs(mm_segment_t fs)
+{
+ current_thread_info()->addr_limit = fs;
+}
+
+#define segment_eq(a,b) ((a) == (b))
+
+#define VERIFY_READ 0
+#define VERIFY_WRITE 1
+
+#define access_ok(type,addr,size) _access_ok((unsigned long)(addr),(size))
+
+static inline int is_in_rom(unsigned long addr)
+{
+ /*
+ * What we are really trying to do is determine if addr is
+ * in an allocated kernel memory region. If not then assume
+ * we cannot free it or otherwise de-allocate it. Ideally
+ * we could restrict this to really being in a ROM or flash,
+ * but that would need to be done on a board by board basis,
+ * not globally.
+ */
+ if ((addr < _ramstart) || (addr >= _ramend))
+ return (1);
+
+ /* Default case, not in ROM */
+ return (0);
+}
+
+/*
+ * The fs value determines whether argument validity checking should be
+ * performed or not. If get_fs() == USER_DS, checking is performed, with
+ * get_fs() == KERNEL_DS, checking is bypassed.
+ */
+
+#ifdef CONFIG_NO_ACCESS_CHECK
+static inline int _access_ok(unsigned long addr, unsigned long size) { return 1; }
+#else
+#ifdef CONFIG_ACCESS_OK_L1
+extern int _access_ok(unsigned long addr, unsigned long size)__attribute__((l1_text));
+#else
+extern int _access_ok(unsigned long addr, unsigned long size);
+#endif
+#endif
+
+/*
+ * The exception table consists of pairs of addresses: the first is the
+ * address of an instruction that is allowed to fault, and the second is
+ * the address at which the program should continue. No registers are
+ * modified, so it is entirely up to the continuation code to figure out
+ * what to do.
+ *
+ * All the routines below use bits of fixup code that are out of line
+ * with the main instruction path. This means when everything is well,
+ * we don't even have to jump over them. Further, they do not intrude
+ * on our cache or tlb entries.
+ */
+
+struct exception_table_entry {
+ unsigned long insn, fixup;
+};
+
+/* Returns 0 if exception not found and fixup otherwise. */
+extern unsigned long search_exception_table(unsigned long);
+
+/*
+ * These are the main single-value transfer routines. They automatically
+ * use the right size if we just have the right pointer type.
+ */
+
+#define put_user(x,p) \
+ ({ \
+ int _err = 0; \
+ typeof(*(p)) _x = (x); \
+ typeof(*(p)) *_p = (p); \
+ if (!access_ok(VERIFY_WRITE, _p, sizeof(*(_p)))) {\
+ _err = -EFAULT; \
+ } \
+ else { \
+ switch (sizeof (*(_p))) { \
+ case 1: \
+ __put_user_asm(_x, _p, B); \
+ break; \
+ case 2: \
+ __put_user_asm(_x, _p, W); \
+ break; \
+ case 4: \
+ __put_user_asm(_x, _p, ); \
+ break; \
+ case 8: { \
+ long _xl, _xh; \
+ _xl = ((long *)&_x)[0]; \
+ _xh = ((long *)&_x)[1]; \
+ __put_user_asm(_xl, ((long *)_p)+0, ); \
+ __put_user_asm(_xh, ((long *)_p)+1, ); \
+ } break; \
+ default: \
+ _err = __put_user_bad(); \
+ break; \
+ } \
+ } \
+ _err; \
+ })
+
+#define __put_user(x,p) put_user(x,p)
+static inline int bad_user_access_length(void)
+{
+ panic("bad_user_access_length");
+ return -1;
+}
+
+#define __put_user_bad() (printk(KERN_INFO "put_user_bad %s:%d %s\n",\
+ __FILE__, __LINE__, __FUNCTION__),\
+ bad_user_access_length(), (-EFAULT))
+
+/*
+ * Tell gcc we read from memory instead of writing: this is because
+ * we do not write to any memory gcc knows about, so there are no
+ * aliasing issues.
+ */
+
+#define __ptr(x) ((unsigned long *)(x))
+
+#define __put_user_asm(x,p,bhw) \
+ __asm__ (#bhw"[%1] = %0;\n\t" \
+ : /* no outputs */ \
+ :"d" (x),"a" (__ptr(p)) : "memory")
+
+#define get_user(x,p) \
+ ({ \
+ int _err = 0; \
+ typeof(*(p)) *_p = (p); \
+ if (!access_ok(VERIFY_READ, _p, sizeof(*(_p)))) { \
+ _err = -EFAULT; \
+ } \
+ else { \
+ switch (sizeof(*(_p))) { \
+ case 1: \
+ __get_user_asm(x, _p, B,(Z)); \
+ break; \
+ case 2: \
+ __get_user_asm(x, _p, W,(Z)); \
+ break; \
+ case 4: \
+ __get_user_asm(x, _p, , ); \
+ break; \
+ case 8: { \
+ unsigned long _xl, _xh; \
+ __get_user_asm(_xl, ((unsigned long *)_p)+0, , ); \
+ __get_user_asm(_xh, ((unsigned long *)_p)+1, , ); \
+ ((unsigned long *)&x)[0] = _xl; \
+ ((unsigned long *)&x)[1] = _xh; \
+ } break; \
+ default: \
+ x = 0; \
+ printk(KERN_INFO "get_user_bad: %s:%d %s\n", \
+ __FILE__, __LINE__, __FUNCTION__); \
+ _err = __get_user_bad(); \
+ break; \
+ } \
+ } \
+ _err; \
+ })
+
+#define __get_user(x,p) get_user(x,p)
+
+#define __get_user_bad() (bad_user_access_length(), (-EFAULT))
+
+#define __get_user_asm(x,p,bhw,option) \
+ { \
+ unsigned long _tmp; \
+ __asm__ ("%0 =" #bhw "[%1]"#option";\n\t" \
+ : "=d" (_tmp) \
+ : "a" (__ptr(p))); \
+ (x) = (__typeof__(*(p))) _tmp; \
+ }
+
+#define __copy_from_user(to, from, n) copy_from_user(to, from, n)
+#define __copy_to_user(to, from, n) copy_to_user(to, from, n)
+#define __copy_to_user_inatomic __copy_to_user
+#define __copy_from_user_inatomic __copy_from_user
+
+#define copy_to_user_ret(to,from,n,retval) ({ if (copy_to_user(to,from,n))\
+ return retval; })
+
+#define copy_from_user_ret(to,from,n,retval) ({ if (copy_from_user(to,from,n))\
+ return retval; })
+
+static inline long copy_from_user(void *to,
+ const void __user * from, unsigned long n)
+{
+ if (access_ok(VERIFY_READ, from, n))
+ memcpy(to, from, n);
+ else
+ return n;
+ return 0;
+}
+
+static inline long copy_to_user(void *to,
+ const void __user * from, unsigned long n)
+{
+ if (access_ok(VERIFY_WRITE, to, n))
+ memcpy(to, from, n);
+ else
+ return n;
+ return 0;
+}
+
+/*
+ * Copy a null terminated string from userspace.
+ */
+
+static inline long strncpy_from_user(char *dst,
+ const char *src, long count)
+{
+ char *tmp;
+ if (!access_ok(VERIFY_READ, src, 1))
+ return -EFAULT;
+ strncpy(dst, src, count);
+ for (tmp = dst; *tmp && count > 0; tmp++, count--) ;
+ return (tmp - dst);
+}
+
+/*
+ * Return the size of a string (including the ending 0)
+ *
+ * Return 0 on exception, a value greater than N if too long
+ */
+static inline long strnlen_user(const char *src, long n)
+{
+ return (strlen(src) + 1);
+}
+
+#define strlen_user(str) strnlen_user(str, 32767)
+
+/*
+ * Zero Userspace
+ */
+
+static inline unsigned long __clear_user(void *to, unsigned long n)
+{
+ memset(to, 0, n);
+ return 0;
+}
+
+#define clear_user(to, n) __clear_user(to, n)
+
+#endif /* _BLACKFIN_UACCESS_H */
diff --git a/include/asm-blackfin/ucontext.h b/include/asm-blackfin/ucontext.h
new file mode 100644
index 0000000..4a4e385
--- /dev/null
+++ b/include/asm-blackfin/ucontext.h
@@ -0,0 +1,17 @@
+/** Changes made by Tony Kou Lineo Inc. May 2001
+ *
+ * Based on: include/m68knommu/ucontext.h
+ */
+
+#ifndef _BLACKFIN_UCONTEXT_H
+#define _BLACKFIN_UCONTEXT_H
+
+struct ucontext {
+ unsigned long uc_flags; /* the others are necessary */
+ struct ucontext *uc_link;
+ stack_t uc_stack;
+ struct sigcontext uc_mcontext;
+ sigset_t uc_sigmask; /* mask last for extensibility */
+};
+
+#endif /* _BLACKFIN_UCONTEXT_H */
diff --git a/include/asm-blackfin/unaligned.h b/include/asm-blackfin/unaligned.h
new file mode 100644
index 0000000..10081dc
--- /dev/null
+++ b/include/asm-blackfin/unaligned.h
@@ -0,0 +1,6 @@
+#ifndef __BFIN_UNALIGNED_H
+#define __BFIN_UNALIGNED_H
+
+#include <asm-generic/unaligned.h>
+
+#endif /* __BFIN_UNALIGNED_H */
diff --git a/include/asm-blackfin/unistd.h b/include/asm-blackfin/unistd.h
new file mode 100644
index 0000000..4df8790
--- /dev/null
+++ b/include/asm-blackfin/unistd.h
@@ -0,0 +1,382 @@
+#ifndef __ASM_BFIN_UNISTD_H
+#define __ASM_BFIN_UNISTD_H
+/*
+ * This file contains the system call numbers.
+ */
+#define __NR_exit 1
+#define __NR_fork 2
+#define __NR_read 3
+#define __NR_write 4
+#define __NR_open 5
+#define __NR_close 6
+ /* 7 __NR_waitpid obsolete */
+#define __NR_creat 8
+#define __NR_link 9
+#define __NR_unlink 10
+#define __NR_execve 11
+#define __NR_chdir 12
+#define __NR_time 13
+#define __NR_mknod 14
+#define __NR_chmod 15
+#define __NR_chown 16
+ /* 17 __NR_break obsolete */
+ /* 18 __NR_oldstat obsolete */
+#define __NR_lseek 19
+#define __NR_getpid 20
+#define __NR_mount 21
+ /* 22 __NR_umount obsolete */
+#define __NR_setuid 23
+#define __NR_getuid 24
+#define __NR_stime 25
+#define __NR_ptrace 26
+#define __NR_alarm 27
+ /* 28 __NR_oldfstat obsolete */
+#define __NR_pause 29
+ /* 30 __NR_utime obsolete */
+ /* 31 __NR_stty obsolete */
+ /* 32 __NR_gtty obsolete */
+#define __NR_access 33
+#define __NR_nice 34
+ /* 35 __NR_ftime obsolete */
+#define __NR_sync 36
+#define __NR_kill 37
+#define __NR_rename 38
+#define __NR_mkdir 39
+#define __NR_rmdir 40
+#define __NR_dup 41
+#define __NR_pipe 42
+#define __NR_times 43
+ /* 44 __NR_prof obsolete */
+#define __NR_brk 45
+#define __NR_setgid 46
+#define __NR_getgid 47
+ /* 48 __NR_signal obsolete */
+#define __NR_geteuid 49
+#define __NR_getegid 50
+#define __NR_acct 51
+#define __NR_umount2 52
+ /* 53 __NR_lock obsolete */
+#define __NR_ioctl 54
+#define __NR_fcntl 55
+ /* 56 __NR_mpx obsolete */
+#define __NR_setpgid 57
+ /* 58 __NR_ulimit obsolete */
+ /* 59 __NR_oldolduname obsolete */
+#define __NR_umask 60
+#define __NR_chroot 61
+#define __NR_ustat 62
+#define __NR_dup2 63
+#define __NR_getppid 64
+#define __NR_getpgrp 65
+#define __NR_setsid 66
+ /* 67 __NR_sigaction obsolete */
+#define __NR_sgetmask 68
+#define __NR_ssetmask 69
+#define __NR_setreuid 70
+#define __NR_setregid 71
+ /* 72 __NR_sigsuspend obsolete */
+ /* 73 __NR_sigpending obsolete */
+#define __NR_sethostname 74
+#define __NR_setrlimit 75
+ /* 76 __NR_old_getrlimit obsolete */
+#define __NR_getrusage 77
+#define __NR_gettimeofday 78
+#define __NR_settimeofday 79
+#define __NR_getgroups 80
+#define __NR_setgroups 81
+ /* 82 __NR_select obsolete */
+#define __NR_symlink 83
+ /* 84 __NR_oldlstat obsolete */
+#define __NR_readlink 85
+ /* 86 __NR_uselib obsolete */
+ /* 87 __NR_swapon obsolete */
+#define __NR_reboot 88
+ /* 89 __NR_readdir obsolete */
+ /* 90 __NR_mmap obsolete */
+#define __NR_munmap 91
+#define __NR_truncate 92
+#define __NR_ftruncate 93
+#define __NR_fchmod 94
+#define __NR_fchown 95
+#define __NR_getpriority 96
+#define __NR_setpriority 97
+ /* 98 __NR_profil obsolete */
+#define __NR_statfs 99
+#define __NR_fstatfs 100
+ /* 101 __NR_ioperm */
+ /* 102 __NR_socketcall obsolete */
+#define __NR_syslog 103
+#define __NR_setitimer 104
+#define __NR_getitimer 105
+#define __NR_stat 106
+#define __NR_lstat 107
+#define __NR_fstat 108
+ /* 109 __NR_olduname obsolete */
+ /* 110 __NR_iopl obsolete */
+#define __NR_vhangup 111
+ /* 112 __NR_idle obsolete */
+ /* 113 __NR_vm86old */
+#define __NR_wait4 114
+ /* 115 __NR_swapoff obsolete */
+#define __NR_sysinfo 116
+ /* 117 __NR_ipc oboslete */
+#define __NR_fsync 118
+ /* 119 __NR_sigreturn obsolete */
+#define __NR_clone 120
+#define __NR_setdomainname 121
+#define __NR_uname 122
+ /* 123 __NR_modify_ldt obsolete */
+#define __NR_adjtimex 124
+#define __NR_mprotect 125
+ /* 126 __NR_sigprocmask obsolete */
+ /* 127 __NR_create_module obsolete */
+#define __NR_init_module 128
+#define __NR_delete_module 129
+ /* 130 __NR_get_kernel_syms obsolete */
+#define __NR_quotactl 131
+#define __NR_getpgid 132
+#define __NR_fchdir 133
+#define __NR_bdflush 134
+ /* 135 was sysfs */
+#define __NR_personality 136
+ /* 137 __NR_afs_syscall */
+#define __NR_setfsuid 138
+#define __NR_setfsgid 139
+#define __NR__llseek 140
+#define __NR_getdents 141
+ /* 142 __NR__newselect obsolete */
+#define __NR_flock 143
+ /* 144 __NR_msync obsolete */
+#define __NR_readv 145
+#define __NR_writev 146
+#define __NR_getsid 147
+#define __NR_fdatasync 148
+#define __NR__sysctl 149
+ /* 150 __NR_mlock */
+ /* 151 __NR_munlock */
+ /* 152 __NR_mlockall */
+ /* 153 __NR_munlockall */
+#define __NR_sched_setparam 154
+#define __NR_sched_getparam 155
+#define __NR_sched_setscheduler 156
+#define __NR_sched_getscheduler 157
+#define __NR_sched_yield 158
+#define __NR_sched_get_priority_max 159
+#define __NR_sched_get_priority_min 160
+#define __NR_sched_rr_get_interval 161
+#define __NR_nanosleep 162
+ /* 163 __NR_mremap */
+#define __NR_setresuid 164
+#define __NR_getresuid 165
+ /* 166 __NR_vm86 */
+ /* 167 __NR_query_module */
+ /* 168 __NR_poll */
+ /* 169 __NR_nfsservctl */
+#define __NR_setresgid 170
+#define __NR_getresgid 171
+#define __NR_prctl 172
+#define __NR_rt_sigreturn 173
+#define __NR_rt_sigaction 174
+#define __NR_rt_sigprocmask 175
+#define __NR_rt_sigpending 176
+#define __NR_rt_sigtimedwait 177
+#define __NR_rt_sigqueueinfo 178
+#define __NR_rt_sigsuspend 179
+#define __NR_pread 180
+#define __NR_pwrite 181
+#define __NR_lchown 182
+#define __NR_getcwd 183
+#define __NR_capget 184
+#define __NR_capset 185
+#define __NR_sigaltstack 186
+#define __NR_sendfile 187
+ /* 188 __NR_getpmsg */
+ /* 189 __NR_putpmsg */
+#define __NR_vfork 190
+#define __NR_getrlimit 191
+#define __NR_mmap2 192
+#define __NR_truncate64 193
+#define __NR_ftruncate64 194
+#define __NR_stat64 195
+#define __NR_lstat64 196
+#define __NR_fstat64 197
+#define __NR_chown32 198
+#define __NR_getuid32 199
+#define __NR_getgid32 200
+#define __NR_geteuid32 201
+#define __NR_getegid32 202
+#define __NR_setreuid32 203
+#define __NR_setregid32 204
+#define __NR_getgroups32 205
+#define __NR_setgroups32 206
+#define __NR_fchown32 207
+#define __NR_setresuid32 208
+#define __NR_getresuid32 209
+#define __NR_setresgid32 210
+#define __NR_getresgid32 211
+#define __NR_lchown32 212
+#define __NR_setuid32 213
+#define __NR_setgid32 214
+#define __NR_setfsuid32 215
+#define __NR_setfsgid32 216
+#define __NR_pivot_root 217
+ /* 218 __NR_mincore */
+ /* 219 __NR_madvise */
+#define __NR_getdents64 220
+#define __NR_fcntl64 221
+ /* 222 reserved for TUX */
+ /* 223 reserved for TUX */
+#define __NR_gettid 224
+ /* 225 __NR_readahead */
+#define __NR_setxattr 226
+#define __NR_lsetxattr 227
+#define __NR_fsetxattr 228
+#define __NR_getxattr 229
+#define __NR_lgetxattr 230
+#define __NR_fgetxattr 231
+#define __NR_listxattr 232
+#define __NR_llistxattr 233
+#define __NR_flistxattr 234
+#define __NR_removexattr 235
+#define __NR_lremovexattr 236
+#define __NR_fremovexattr 237
+#define __NR_tkill 238
+#define __NR_sendfile64 239
+#define __NR_futex 240
+#define __NR_sched_setaffinity 241
+#define __NR_sched_getaffinity 242
+ /* 243 __NR_set_thread_area */
+ /* 244 __NR_get_thread_area */
+#define __NR_io_setup 245
+#define __NR_io_destroy 246
+#define __NR_io_getevents 247
+#define __NR_io_submit 248
+#define __NR_io_cancel 249
+ /* 250 __NR_alloc_hugepages */
+ /* 251 __NR_free_hugepages */
+#define __NR_exit_group 252
+#define __NR_lookup_dcookie 253
+#define __NR_bfin_spinlock 254
+
+#define __NR_epoll_create 255
+#define __NR_epoll_ctl 256
+#define __NR_epoll_wait 257
+ /* 258 __NR_remap_file_pages */
+#define __NR_set_tid_address 259
+#define __NR_timer_create 260
+#define __NR_timer_settime (__NR_timer_create+1)
+#define __NR_timer_gettime (__NR_timer_create+2)
+#define __NR_timer_getoverrun (__NR_timer_create+3)
+#define __NR_timer_delete (__NR_timer_create+4)
+#define __NR_clock_settime (__NR_timer_create+5)
+#define __NR_clock_gettime (__NR_timer_create+6)
+#define __NR_clock_getres (__NR_timer_create+7)
+#define __NR_clock_nanosleep (__NR_timer_create+8)
+#define __NR_statfs64 269
+#define __NR_fstatfs64 270
+#define __NR_tgkill 271
+#define __NR_utimes 272
+#define __NR_fadvise64_64 273
+ /* 274 __NR_vserver */
+ /* 275 __NR_mbind */
+ /* 276 __NR_get_mempolicy */
+ /* 277 __NR_set_mempolicy */
+#define __NR_mq_open 278
+#define __NR_mq_unlink (__NR_mq_open+1)
+#define __NR_mq_timedsend (__NR_mq_open+2)
+#define __NR_mq_timedreceive (__NR_mq_open+3)
+#define __NR_mq_notify (__NR_mq_open+4)
+#define __NR_mq_getsetattr (__NR_mq_open+5)
+ /* 284 __NR_sys_kexec_load */
+#define __NR_waitid 285
+#define __NR_add_key 286
+#define __NR_request_key 287
+#define __NR_keyctl 288
+#define __NR_ioprio_set 289
+#define __NR_ioprio_get 290
+#define __NR_inotify_init 291
+#define __NR_inotify_add_watch 292
+#define __NR_inotify_rm_watch 293
+ /* 294 __NR_migrate_pages */
+#define __NR_openat 295
+#define __NR_mkdirat 296
+#define __NR_mknodat 297
+#define __NR_fchownat 298
+#define __NR_futimesat 299
+#define __NR_fstatat64 300
+#define __NR_unlinkat 301
+#define __NR_renameat 302
+#define __NR_linkat 303
+#define __NR_symlinkat 304
+#define __NR_readlinkat 305
+#define __NR_fchmodat 306
+#define __NR_faccessat 307
+#define __NR_pselect6 308
+#define __NR_ppoll 309
+#define __NR_unshare 310
+
+/* Blackfin private syscalls */
+#define __NR_sram_alloc 311
+#define __NR_sram_free 312
+#define __NR_dma_memcpy 313
+
+/* socket syscalls */
+#define __NR_accept 314
+#define __NR_bind 315
+#define __NR_connect 316
+#define __NR_getpeername 317
+#define __NR_getsockname 318
+#define __NR_getsockopt 319
+#define __NR_listen 320
+#define __NR_recv 321
+#define __NR_recvfrom 322
+#define __NR_recvmsg 323
+#define __NR_send 324
+#define __NR_sendmsg 325
+#define __NR_sendto 326
+#define __NR_setsockopt 327
+#define __NR_shutdown 328
+#define __NR_socket 329
+#define __NR_socketpair 330
+
+/* sysv ipc syscalls */
+#define __NR_semctl 331
+#define __NR_semget 332
+#define __NR_semop 333
+#define __NR_msgctl 334
+#define __NR_msgget 335
+#define __NR_msgrcv 336
+#define __NR_msgsnd 337
+#define __NR_shmat 338
+#define __NR_shmctl 339
+#define __NR_shmdt 340
+#define __NR_shmget 341
+
+#define __NR_syscall 342
+#define NR_syscalls __NR_syscall
+
+#ifdef __KERNEL__
+#define __ARCH_WANT_IPC_PARSE_VERSION
+#define __ARCH_WANT_STAT64
+#define __ARCH_WANT_SYS_ALARM
+#define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_PAUSE
+#define __ARCH_WANT_SYS_SGETMASK
+#define __ARCH_WANT_SYS_TIME
+#define __ARCH_WANT_SYS_FADVISE64
+#define __ARCH_WANT_SYS_GETPGRP
+#define __ARCH_WANT_SYS_LLSEEK
+#define __ARCH_WANT_SYS_NICE
+#define __ARCH_WANT_SYS_RT_SIGACTION
+#define __ARCH_WANT_SYS_RT_SIGSUSPEND
+#endif
+
+/*
+ * "Conditional" syscalls
+ *
+ * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
+ * but it doesn't work on all toolchains, so we just do it by hand
+ */
+#define cond_syscall(x) asm(".weak\t_" #x "\n\t.set\t_" #x ",_sys_ni_syscall");
+
+#endif /* __ASM_BFIN_UNISTD_H */
diff --git a/include/asm-blackfin/user.h b/include/asm-blackfin/user.h
new file mode 100644
index 0000000..abc3462
--- /dev/null
+++ b/include/asm-blackfin/user.h
@@ -0,0 +1,89 @@
+#ifndef _BFIN_USER_H
+#define _BFIN_USER_H
+
+/* Changes by Tony Kou Lineo, Inc. July, 2001
+ *
+ * Based include/asm-m68knommu/user.h
+ *
+ */
+
+/* Core file format: The core file is written in such a way that gdb
+ can understand it and provide useful information to the user (under
+ linux we use the 'trad-core' bfd). There are quite a number of
+ obstacles to being able to view the contents of the floating point
+ registers, and until these are solved you will not be able to view the
+ contents of them. Actually, you can read in the core file and look at
+ the contents of the user struct to find out what the floating point
+ registers contain.
+ The actual file contents are as follows:
+ UPAGE: 1 page consisting of a user struct that tells gdb what is present
+ in the file. Directly after this is a copy of the task_struct, which
+ is currently not used by gdb, but it may come in useful at some point.
+ All of the registers are stored as part of the upage. The upage should
+ always be only one page.
+ DATA: The data area is stored. We use current->end_text to
+ current->brk to pick up all of the user variables, plus any memory
+ that may have been malloced. No attempt is made to determine if a page
+ is demand-zero or if a page is totally unused, we just cover the entire
+ range. All of the addresses are rounded in such a way that an integral
+ number of pages is written.
+ STACK: We need the stack information in order to get a meaningful
+ backtrace. We need to write the data from (esp) to
+ current->start_stack, so we round each of these off in order to be able
+ to write an integer number of pages.
+ The minimum core file size is 3 pages, or 12288 bytes.
+*/
+struct user_bfinfp_struct {
+};
+
+/* This is the old layout of "struct pt_regs" as of Linux 1.x, and
+ is still the layout used by user (the new pt_regs doesn't have
+ all registers). */
+struct user_regs_struct {
+ long r0, r1, r2, r3, r4, r5, r6, r7;
+ long p0, p1, p2, p3, p4, p5, usp, fp;
+ long i0, i1, i2, i3;
+ long l0, l1, l2, l3;
+ long b0, b1, b2, b3;
+ long m0, m1, m2, m3;
+ long a0w, a1w;
+ long a0x, a1x;
+ unsigned long rets;
+ unsigned long astat;
+ unsigned long pc;
+ unsigned long orig_p0;
+};
+
+/* When the kernel dumps core, it starts by dumping the user struct -
+ this will be used by gdb to figure out where the data and stack segments
+ are within the file, and what virtual addresses to use. */
+
+struct user {
+/* We start with the registers, to mimic the way that "memory" is returned
+ from the ptrace(3,...) function. */
+
+ struct user_regs_struct regs; /* Where the registers are actually stored */
+
+/* The rest of this junk is to help gdb figure out what goes where */
+ unsigned long int u_tsize; /* Text segment size (pages). */
+ unsigned long int u_dsize; /* Data segment size (pages). */
+ unsigned long int u_ssize; /* Stack segment size (pages). */
+ unsigned long start_code; /* Starting virtual address of text. */
+ unsigned long start_stack; /* Starting virtual address of stack area.
+ This is actually the bottom of the stack,
+ the top of the stack is always found in the
+ esp register. */
+ long int signal; /* Signal that caused the core dump. */
+ int reserved; /* No longer used */
+ struct user_regs_struct *u_ar0;
+ /* Used by gdb to help find the values for */
+ /* the registers. */
+ unsigned long magic; /* To uniquely identify a core file */
+ char u_comm[32]; /* User command that was responsible */
+};
+#define NBPG PAGE_SIZE
+#define UPAGES 1
+#define HOST_TEXT_START_ADDR (u.start_code)
+#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG)
+
+#endif
diff --git a/include/asm-h8300/irq.h b/include/asm-h8300/irq.h
index 42a3ac4..41be646 100644
--- a/include/asm-h8300/irq.h
+++ b/include/asm-h8300/irq.h
@@ -61,6 +61,5 @@
extern void enable_irq(unsigned int);
extern void disable_irq(unsigned int);
-#define disable_irq_nosync(x) disable_irq(x)
#endif /* _H8300_IRQ_H_ */
diff --git a/include/asm-h8300/irq_regs.h b/include/asm-h8300/irq_regs.h
new file mode 100644
index 0000000..3dd9c0b
--- /dev/null
+++ b/include/asm-h8300/irq_regs.h
@@ -0,0 +1 @@
+#include <asm-generic/irq_regs.h>
diff --git a/include/asm-h8300/pgtable.h b/include/asm-h8300/pgtable.h
index 8b7c685..ddd07f4 100644
--- a/include/asm-h8300/pgtable.h
+++ b/include/asm-h8300/pgtable.h
@@ -73,4 +73,5 @@
#define VMALLOC_START 0
#define VMALLOC_END 0xffffffff
+#define arch_enter_lazy_cpu_mode() do {} while (0)
#endif /* _H8300_PGTABLE_H */
diff --git a/include/asm-i386/pgtable.h b/include/asm-i386/pgtable.h
index c6b8b94..e16359f 100644
--- a/include/asm-i386/pgtable.h
+++ b/include/asm-i386/pgtable.h
@@ -296,12 +296,25 @@
} \
} while (0)
-/*
- * We don't actually have these, but we want to advertise them so that
- * we can encompass the flush here.
- */
#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_DIRTY
+#define ptep_test_and_clear_dirty(vma, addr, ptep) ({ \
+ int ret = 0; \
+ if (pte_dirty(*ptep)) \
+ ret = test_and_clear_bit(_PAGE_BIT_DIRTY, &ptep->pte_low); \
+ if (ret) \
+ pte_update_defer(vma->vm_mm, addr, ptep); \
+ ret; \
+})
+
#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
+#define ptep_test_and_clear_young(vma, addr, ptep) ({ \
+ int ret = 0; \
+ if (pte_young(*ptep)) \
+ ret = test_and_clear_bit(_PAGE_BIT_ACCESSED, &ptep->pte_low); \
+ if (ret) \
+ pte_update_defer(vma->vm_mm, addr, ptep); \
+ ret; \
+})
/*
* Rules for using ptep_establish: the pte MUST be a user pte, and
@@ -318,12 +331,9 @@
#define ptep_clear_flush_dirty(vma, address, ptep) \
({ \
int __dirty; \
- __dirty = pte_dirty(*(ptep)); \
- if (__dirty) { \
- clear_bit(_PAGE_BIT_DIRTY, &(ptep)->pte_low); \
- pte_update_defer((vma)->vm_mm, (address), (ptep)); \
+ __dirty = ptep_test_and_clear_dirty((vma), (address), (ptep)); \
+ if (__dirty) \
flush_tlb_page(vma, address); \
- } \
__dirty; \
})
@@ -331,12 +341,9 @@
#define ptep_clear_flush_young(vma, address, ptep) \
({ \
int __young; \
- __young = pte_young(*(ptep)); \
- if (__young) { \
- clear_bit(_PAGE_BIT_ACCESSED, &(ptep)->pte_low); \
- pte_update_defer((vma)->vm_mm, (address), (ptep)); \
+ __young = ptep_test_and_clear_young((vma), (address), (ptep)); \
+ if (__young) \
flush_tlb_page(vma, address); \
- } \
__young; \
})
diff --git a/include/asm-i386/thread_info.h b/include/asm-i386/thread_info.h
index 4b187bb..bf01d4b 100644
--- a/include/asm-i386/thread_info.h
+++ b/include/asm-i386/thread_info.h
@@ -95,12 +95,14 @@
/* thread information allocation */
#ifdef CONFIG_DEBUG_STACK_USAGE
-#define alloc_thread_info(tsk) kzalloc(THREAD_SIZE, GFP_KERNEL)
+#define alloc_thread_info(tsk) ((struct thread_info *) \
+ __get_free_pages(GFP_KERNEL| __GFP_ZERO, get_order(THREAD_SIZE)))
#else
-#define alloc_thread_info(tsk) kmalloc(THREAD_SIZE, GFP_KERNEL)
+#define alloc_thread_info(tsk) ((struct thread_info *) \
+ __get_free_pages(GFP_KERNEL, get_order(THREAD_SIZE)))
#endif
-#define free_thread_info(info) kfree(info)
+#define free_thread_info(info) free_pages((unsigned long)(info), get_order(THREAD_SIZE))
#else /* !__ASSEMBLY__ */
diff --git a/include/asm-s390/dma-mapping.h b/include/asm-s390/dma-mapping.h
index 09bb7b0..3f8c12f 100644
--- a/include/asm-s390/dma-mapping.h
+++ b/include/asm-s390/dma-mapping.h
@@ -9,6 +9,4 @@
#ifndef _ASM_DMA_MAPPING_H
#define _ASM_DMA_MAPPING_H
-#include <asm-generic/dma-mapping-broken.h>
-
#endif /* _ASM_DMA_MAPPING_H */
diff --git a/include/asm-sparc64/pgalloc.h b/include/asm-sparc64/pgalloc.h
index 5891ff7..5d66b85 100644
--- a/include/asm-sparc64/pgalloc.h
+++ b/include/asm-sparc64/pgalloc.h
@@ -6,6 +6,7 @@
#include <linux/sched.h>
#include <linux/mm.h>
#include <linux/slab.h>
+#include <linux/quicklist.h>
#include <asm/spitfire.h>
#include <asm/cpudata.h>
@@ -13,52 +14,50 @@
#include <asm/page.h>
/* Page table allocation/freeing. */
-extern struct kmem_cache *pgtable_cache;
static inline pgd_t *pgd_alloc(struct mm_struct *mm)
{
- return kmem_cache_alloc(pgtable_cache, GFP_KERNEL);
+ return quicklist_alloc(0, GFP_KERNEL, NULL);
}
static inline void pgd_free(pgd_t *pgd)
{
- kmem_cache_free(pgtable_cache, pgd);
+ quicklist_free(0, NULL, pgd);
}
#define pud_populate(MM, PUD, PMD) pud_set(PUD, PMD)
static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long addr)
{
- return kmem_cache_alloc(pgtable_cache,
- GFP_KERNEL|__GFP_REPEAT);
+ return quicklist_alloc(0, GFP_KERNEL, NULL);
}
static inline void pmd_free(pmd_t *pmd)
{
- kmem_cache_free(pgtable_cache, pmd);
+ quicklist_free(0, NULL, pmd);
}
static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm,
unsigned long address)
{
- return kmem_cache_alloc(pgtable_cache,
- GFP_KERNEL|__GFP_REPEAT);
+ return quicklist_alloc(0, GFP_KERNEL, NULL);
}
static inline struct page *pte_alloc_one(struct mm_struct *mm,
unsigned long address)
{
- return virt_to_page(pte_alloc_one_kernel(mm, address));
+ void *pg = quicklist_alloc(0, GFP_KERNEL, NULL);
+ return pg ? virt_to_page(pg) : NULL;
}
static inline void pte_free_kernel(pte_t *pte)
{
- kmem_cache_free(pgtable_cache, pte);
+ quicklist_free(0, NULL, pte);
}
static inline void pte_free(struct page *ptepage)
{
- pte_free_kernel(page_address(ptepage));
+ quicklist_free_page(0, NULL, ptepage);
}
@@ -66,6 +65,9 @@
#define pmd_populate(MM,PMD,PTE_PAGE) \
pmd_populate_kernel(MM,PMD,page_address(PTE_PAGE))
-#define check_pgt_cache() do { } while (0)
+static inline void check_pgt_cache(void)
+{
+ quicklist_trim(0, NULL, 25, 16);
+}
#endif /* _SPARC64_PGALLOC_H */
diff --git a/include/asm-um/page.h b/include/asm-um/page.h
index 4296d31..8e310d8 100644
--- a/include/asm-um/page.h
+++ b/include/asm-um/page.h
@@ -114,9 +114,6 @@
extern struct page *arch_validate(struct page *page, gfp_t mask, int order);
#define HAVE_ARCH_VALIDATE
-extern void arch_free_page(struct page *page, int order);
-#define HAVE_ARCH_FREE_PAGE
-
#include <asm-generic/memory_model.h>
#include <asm-generic/page.h>
diff --git a/include/asm-um/tlbflush.h b/include/asm-um/tlbflush.h
index 522aa30..e78c28c 100644
--- a/include/asm-um/tlbflush.h
+++ b/include/asm-um/tlbflush.h
@@ -7,6 +7,7 @@
#define __UM_TLBFLUSH_H
#include <linux/mm.h>
+#include "choose-mode.h"
/*
* TLB flushing:
@@ -24,6 +25,18 @@
extern void flush_tlb_mm(struct mm_struct *mm);
extern void flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
unsigned long end);
+extern void flush_tlb_page_skas(struct vm_area_struct *vma,
+ unsigned long address);
+
+static inline void flush_tlb_page(struct vm_area_struct *vma,
+ unsigned long address)
+{
+ address &= PAGE_MASK;
+
+ CHOOSE_MODE(flush_tlb_range(vma, address, address + PAGE_SIZE),
+ flush_tlb_page_skas(vma, address));
+}
+
extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr);
extern void flush_tlb_kernel_vm(void);
extern void flush_tlb_kernel_range(unsigned long start, unsigned long end);
@@ -35,14 +48,3 @@
}
#endif
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
diff --git a/include/asm-x86_64/page.h b/include/asm-x86_64/page.h
index b17fc16..4d04e24 100644
--- a/include/asm-x86_64/page.h
+++ b/include/asm-x86_64/page.h
@@ -94,26 +94,22 @@
#define KERNEL_TEXT_SIZE (40*1024*1024)
#define KERNEL_TEXT_START 0xffffffff80000000
+#define PAGE_OFFSET __PAGE_OFFSET
#ifndef __ASSEMBLY__
#include <asm/bug.h>
+extern unsigned long __phys_addr(unsigned long);
+
#endif /* __ASSEMBLY__ */
-#define PAGE_OFFSET __PAGE_OFFSET
-
-/* Note: __pa(&symbol_visible_to_c) should be always replaced with __pa_symbol.
- Otherwise you risk miscompilation. */
-#define __pa(x) ((unsigned long)(x) - PAGE_OFFSET)
-/* __pa_symbol should be used for C visible symbols.
- This seems to be the official gcc blessed way to do such arithmetic. */
-#define __pa_symbol(x) \
- ({unsigned long v; \
- asm("" : "=r" (v) : "0" (x)); \
- ((v - __START_KERNEL_map) + phys_base); })
+#define __pa(x) __phys_addr((unsigned long)(x))
+#define __pa_symbol(x) __phys_addr((unsigned long)(x))
#define __va(x) ((void *)((unsigned long)(x)+PAGE_OFFSET))
+#define __boot_va(x) __va(x)
+#define __boot_pa(x) __pa(x)
#ifdef CONFIG_FLATMEM
#define pfn_valid(pfn) ((pfn) < end_pfn)
#endif
diff --git a/include/asm-x86_64/pgtable.h b/include/asm-x86_64/pgtable.h
index 599993f..da3390f 100644
--- a/include/asm-x86_64/pgtable.h
+++ b/include/asm-x86_64/pgtable.h
@@ -19,7 +19,7 @@
extern pgd_t init_level4_pgt[];
extern unsigned long __supported_pte_mask;
-#define swapper_pg_dir ((pgd_t *)NULL)
+#define swapper_pg_dir init_level4_pgt
extern void paging_init(void);
extern void clear_kernel_mapping(unsigned long addr, unsigned long size);
@@ -29,7 +29,7 @@
* for zero-mapped memory areas etc..
*/
extern unsigned long empty_zero_page[PAGE_SIZE/sizeof(unsigned long)];
-#define ZERO_PAGE(vaddr) (pfn_to_page(__pa_symbol(&empty_zero_page) >> PAGE_SHIFT))
+#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page))
#endif /* !__ASSEMBLY__ */
diff --git a/include/linux/buffer_head.h b/include/linux/buffer_head.h
index dd27b1c..5c6e128 100644
--- a/include/linux/buffer_head.h
+++ b/include/linux/buffer_head.h
@@ -165,7 +165,7 @@
void unmap_underlying_metadata(struct block_device *bdev, sector_t block);
void mark_buffer_async_write(struct buffer_head *bh);
-void invalidate_bdev(struct block_device *, int);
+void invalidate_bdev(struct block_device *);
int sync_blockdev(struct block_device *bdev);
void __wait_on_buffer(struct buffer_head *);
wait_queue_head_t *bh_waitq_head(struct buffer_head *bh);
@@ -182,6 +182,7 @@
void __bforget(struct buffer_head *);
void __breadahead(struct block_device *, sector_t block, unsigned int size);
struct buffer_head *__bread(struct block_device *, sector_t block, unsigned size);
+void invalidate_bh_lrus(void);
struct buffer_head *alloc_buffer_head(gfp_t gfp_flags);
void free_buffer_head(struct buffer_head * bh);
void FASTCALL(unlock_buffer(struct buffer_head *bh));
@@ -319,7 +320,7 @@
static inline void invalidate_inode_buffers(struct inode *inode) {}
static inline int remove_inode_buffers(struct inode *inode) { return 1; }
static inline int sync_mapping_buffers(struct address_space *mapping) { return 0; }
-static inline void invalidate_bdev(struct block_device *bdev, int destroy_dirty_buffers) {}
+static inline void invalidate_bdev(struct block_device *bdev) {}
#endif /* CONFIG_BLOCK */
diff --git a/include/linux/compiler-gcc.h b/include/linux/compiler-gcc.h
index 9008eab..a9f7947 100644
--- a/include/linux/compiler-gcc.h
+++ b/include/linux/compiler-gcc.h
@@ -22,6 +22,9 @@
__asm__ ("" : "=r"(__ptr) : "0"(ptr)); \
(typeof(ptr)) (__ptr + (off)); })
+/* &a[0] degrades to a pointer: a different type from an array */
+#define __must_be_array(a) \
+ BUILD_BUG_ON_ZERO(__builtin_types_compatible_p(typeof(a), typeof(&a[0])))
#define inline inline __attribute__((always_inline))
#define __inline__ __inline__ __attribute__((always_inline))
diff --git a/include/linux/compiler-gcc3.h b/include/linux/compiler-gcc3.h
index 1698b84..ecd621f 100644
--- a/include/linux/compiler-gcc3.h
+++ b/include/linux/compiler-gcc3.h
@@ -13,4 +13,10 @@
#define __must_check __attribute__((warn_unused_result))
#endif
+/*
+ * A trick to suppress uninitialized variable warning without generating any
+ * code
+ */
+#define uninitialized_var(x) x = x
+
#define __always_inline inline __attribute__((always_inline))
diff --git a/include/linux/compiler-gcc4.h b/include/linux/compiler-gcc4.h
index 6f5cc6f..fd0cc7c 100644
--- a/include/linux/compiler-gcc4.h
+++ b/include/linux/compiler-gcc4.h
@@ -16,3 +16,9 @@
#define __must_check __attribute__((warn_unused_result))
#define __compiler_offsetof(a,b) __builtin_offsetof(a,b)
#define __always_inline inline __attribute__((always_inline))
+
+/*
+ * A trick to suppress uninitialized variable warning without generating any
+ * code
+ */
+#define uninitialized_var(x) x = x
diff --git a/include/linux/compiler-intel.h b/include/linux/compiler-intel.h
index 1d1c3ce..b769961 100644
--- a/include/linux/compiler-intel.h
+++ b/include/linux/compiler-intel.h
@@ -21,4 +21,9 @@
__ptr = (unsigned long) (ptr); \
(typeof(ptr)) (__ptr + (off)); })
+/* Intel ECC compiler doesn't support __builtin_types_compatible_p() */
+#define __must_be_array(a) 0
+
#endif
+
+#define uninitialized_var(x) x
diff --git a/include/linux/elf-em.h b/include/linux/elf-em.h
index 666e0a5..0311bad 100644
--- a/include/linux/elf-em.h
+++ b/include/linux/elf-em.h
@@ -30,6 +30,7 @@
#define EM_V850 87 /* NEC v850 */
#define EM_M32R 88 /* Renesas M32R */
#define EM_H8_300 46 /* Renesas H8/300,300H,H8S */
+#define EM_BLACKFIN 106 /* ADI Blackfin Processor */
#define EM_FRV 0x5441 /* Fujitsu FR-V */
#define EM_AVR32 0x18ad /* Atmel AVR32 */
diff --git a/include/linux/etherdevice.h b/include/linux/etherdevice.h
index 745c988..071c67a 100644
--- a/include/linux/etherdevice.h
+++ b/include/linux/etherdevice.h
@@ -71,6 +71,18 @@
}
/**
+ * is_local_ether_addr - Determine if the Ethernet address is locally-assigned
+ * one (IEEE 802).
+ * @addr: Pointer to a six-byte array containing the Ethernet address
+ *
+ * Return true if the address is a local address.
+ */
+static inline int is_local_ether_addr(const u8 *addr)
+{
+ return (0x02 & addr[0]);
+}
+
+/**
* is_broadcast_ether_addr - Determine if the Ethernet address is broadcast
* @addr: Pointer to a six-byte array containing the Ethernet address
*
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 7c0077f..55a74ff 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -696,12 +696,13 @@
unsigned long size;
unsigned long flags; /* ra flags RA_FLAG_xxx*/
unsigned long cache_hit; /* cache hit count*/
- unsigned long prev_page; /* Cache last read() position */
+ unsigned long prev_index; /* Cache last read() position */
unsigned long ahead_start; /* Ahead window */
unsigned long ahead_size;
unsigned long ra_pages; /* Maximum readahead window */
unsigned long mmap_hit; /* Cache hit stat for mmap accesses */
unsigned long mmap_miss; /* Cache miss stat for mmap accesses */
+ unsigned int prev_offset; /* Offset where last read() ended in a page */
};
#define RA_FLAG_MISS 0x01 /* a cache miss occured against this file */
#define RA_FLAG_INCACHE 0x02 /* file is already in cache */
diff --git a/include/linux/gfp.h b/include/linux/gfp.h
index 2a7d15b..97a36c3 100644
--- a/include/linux/gfp.h
+++ b/include/linux/gfp.h
@@ -40,7 +40,6 @@
#define __GFP_REPEAT ((__force gfp_t)0x400u) /* Retry the allocation. Might fail */
#define __GFP_NOFAIL ((__force gfp_t)0x800u) /* Retry for ever. Cannot fail */
#define __GFP_NORETRY ((__force gfp_t)0x1000u)/* Do not retry. Might fail */
-#define __GFP_NO_GROW ((__force gfp_t)0x2000u)/* Slab internal usage */
#define __GFP_COMP ((__force gfp_t)0x4000u)/* Add compound page metadata */
#define __GFP_ZERO ((__force gfp_t)0x8000u)/* Return zeroed page on success */
#define __GFP_NOMEMALLOC ((__force gfp_t)0x10000u) /* Don't use emergency reserves */
@@ -53,7 +52,7 @@
/* if you forget to add the bitmask here kernel will crash, period */
#define GFP_LEVEL_MASK (__GFP_WAIT|__GFP_HIGH|__GFP_IO|__GFP_FS| \
__GFP_COLD|__GFP_NOWARN|__GFP_REPEAT| \
- __GFP_NOFAIL|__GFP_NORETRY|__GFP_NO_GROW|__GFP_COMP| \
+ __GFP_NOFAIL|__GFP_NORETRY|__GFP_COMP| \
__GFP_NOMEMALLOC|__GFP_HARDWALL|__GFP_THISNODE)
/* This equals 0, but use constants in case they ever change */
diff --git a/include/linux/hugetlb.h b/include/linux/hugetlb.h
index 3f3e7a6..b4570b6 100644
--- a/include/linux/hugetlb.h
+++ b/include/linux/hugetlb.h
@@ -189,4 +189,10 @@
#endif /* !CONFIG_HUGETLBFS */
+#ifdef HAVE_ARCH_HUGETLB_UNMAPPED_AREA
+unsigned long hugetlb_get_unmapped_area(struct file *file, unsigned long addr,
+ unsigned long len, unsigned long pgoff,
+ unsigned long flags);
+#endif /* HAVE_ARCH_HUGETLB_UNMAPPED_AREA */
+
#endif /* _LINUX_HUGETLB_H */
diff --git a/include/linux/init.h b/include/linux/init.h
index 9abf120..dbbdbd1 100644
--- a/include/linux/init.h
+++ b/include/linux/init.h
@@ -233,7 +233,7 @@
#define __obsolete_setup(str) /* nothing */
#endif
-/* Data marked not to be saved by software_suspend() */
+/* Data marked not to be saved by software suspend */
#define __nosavedata __attribute__ ((__section__ (".data.nosave")))
/* This means "can be init if no module support, otherwise module load
diff --git a/include/linux/kernel.h b/include/linux/kernel.h
index e2f41b0..144b615 100644
--- a/include/linux/kernel.h
+++ b/include/linux/kernel.h
@@ -35,7 +35,8 @@
#define ALIGN(x,a) __ALIGN_MASK(x,(typeof(x))(a)-1)
#define __ALIGN_MASK(x,mask) (((x)+(mask))&~(mask))
-#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
+#define ARRAY_SIZE(arr) (sizeof(arr) / sizeof((arr)[0]) + __must_be_array(arr))
+
#define FIELD_SIZEOF(t, f) (sizeof(((t*)0)->f))
#define DIV_ROUND_UP(n,d) (((n) + (d) - 1) / (d))
#define roundup(x, y) ((((x) + ((y) - 1)) / (y)) * (y))
diff --git a/include/linux/migrate.h b/include/linux/migrate.h
index 75e55dc..e10a90a 100644
--- a/include/linux/migrate.h
+++ b/include/linux/migrate.h
@@ -2,18 +2,29 @@
#define _LINUX_MIGRATE_H
#include <linux/mm.h>
+#include <linux/mempolicy.h>
+#include <linux/pagemap.h>
typedef struct page *new_page_t(struct page *, unsigned long private, int **);
+#ifdef CONFIG_MIGRATION
/* Check if a vma is migratable */
static inline int vma_migratable(struct vm_area_struct *vma)
{
if (vma->vm_flags & (VM_IO|VM_HUGETLB|VM_PFNMAP|VM_RESERVED))
return 0;
+ /*
+ * Migration allocates pages in the highest zone. If we cannot
+ * do so then migration (at least from node to node) is not
+ * possible.
+ */
+ if (vma->vm_file &&
+ gfp_zone(mapping_gfp_mask(vma->vm_file->f_mapping))
+ < policy_zone)
+ return 0;
return 1;
}
-#ifdef CONFIG_MIGRATION
extern int isolate_lru_page(struct page *p, struct list_head *pagelist);
extern int putback_lru_pages(struct list_head *l);
extern int migrate_page(struct address_space *,
@@ -28,6 +39,8 @@
const nodemask_t *from, const nodemask_t *to,
unsigned long flags);
#else
+static inline int vma_migratable(struct vm_area_struct *vma)
+ { return 0; }
static inline int isolate_lru_page(struct page *p, struct list_head *list)
{ return -ENOSYS; }
diff --git a/include/linux/mm.h b/include/linux/mm.h
index 60e0e4a..4670ebd 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -267,21 +267,31 @@
return atomic_inc_not_zero(&page->_count);
}
+static inline struct page *compound_head(struct page *page)
+{
+ if (unlikely(PageTail(page)))
+ return page->first_page;
+ return page;
+}
+
static inline int page_count(struct page *page)
{
- if (unlikely(PageCompound(page)))
- page = (struct page *)page_private(page);
- return atomic_read(&page->_count);
+ return atomic_read(&compound_head(page)->_count);
}
static inline void get_page(struct page *page)
{
- if (unlikely(PageCompound(page)))
- page = (struct page *)page_private(page);
+ page = compound_head(page);
VM_BUG_ON(atomic_read(&page->_count) == 0);
atomic_inc(&page->_count);
}
+static inline struct page *virt_to_head_page(const void *x)
+{
+ struct page *page = virt_to_page(x);
+ return compound_head(page);
+}
+
/*
* Setup the page count before being freed into the page allocator for
* the first time (boot or memory hotplug)
@@ -314,6 +324,18 @@
return (compound_page_dtor *)page[1].lru.next;
}
+static inline int compound_order(struct page *page)
+{
+ if (!PageHead(page))
+ return 0;
+ return (unsigned long)page[1].lru.prev;
+}
+
+static inline void set_compound_order(struct page *page, unsigned long order)
+{
+ page[1].lru.prev = (void *)order;
+}
+
/*
* Multiple processes may "see" the same page. E.g. for untouched
* mappings of /dev/null, all processes see the same page full of
@@ -850,8 +872,26 @@
extern pte_t *FASTCALL(get_locked_pte(struct mm_struct *mm, unsigned long addr, spinlock_t **ptl));
+#ifdef __PAGETABLE_PUD_FOLDED
+static inline int __pud_alloc(struct mm_struct *mm, pgd_t *pgd,
+ unsigned long address)
+{
+ return 0;
+}
+#else
int __pud_alloc(struct mm_struct *mm, pgd_t *pgd, unsigned long address);
+#endif
+
+#ifdef __PAGETABLE_PMD_FOLDED
+static inline int __pmd_alloc(struct mm_struct *mm, pud_t *pud,
+ unsigned long address)
+{
+ return 0;
+}
+#else
int __pmd_alloc(struct mm_struct *mm, pud_t *pud, unsigned long address);
+#endif
+
int __pte_alloc(struct mm_struct *mm, pmd_t *pmd, unsigned long address);
int __pte_alloc_kernel(pmd_t *pmd, unsigned long address);
@@ -1130,6 +1170,11 @@
#define FOLL_GET 0x04 /* do get_page on page */
#define FOLL_ANON 0x08 /* give ZERO_PAGE if no pgtable */
+typedef int (*pte_fn_t)(pte_t *pte, struct page *pmd_page, unsigned long addr,
+ void *data);
+extern int apply_to_page_range(struct mm_struct *mm, unsigned long address,
+ unsigned long size, pte_fn_t fn, void *data);
+
#ifdef CONFIG_PROC_FS
void vm_stat_account(struct mm_struct *, unsigned long, struct file *, long);
#else
diff --git a/include/linux/mm_types.h b/include/linux/mm_types.h
index c3852fd..e30687b 100644
--- a/include/linux/mm_types.h
+++ b/include/linux/mm_types.h
@@ -19,10 +19,16 @@
unsigned long flags; /* Atomic flags, some possibly
* updated asynchronously */
atomic_t _count; /* Usage count, see below. */
- atomic_t _mapcount; /* Count of ptes mapped in mms,
+ union {
+ atomic_t _mapcount; /* Count of ptes mapped in mms,
* to show when page is mapped
* & limit reverse map searches.
*/
+ struct { /* SLUB uses */
+ short unsigned int inuse;
+ short unsigned int offset;
+ };
+ };
union {
struct {
unsigned long private; /* Mapping-private opaque data:
@@ -43,8 +49,15 @@
#if NR_CPUS >= CONFIG_SPLIT_PTLOCK_CPUS
spinlock_t ptl;
#endif
+ struct { /* SLUB uses */
+ struct page *first_page; /* Compound pages */
+ struct kmem_cache *slab; /* Pointer to slab */
+ };
};
- pgoff_t index; /* Our offset within mapping. */
+ union {
+ pgoff_t index; /* Our offset within mapping. */
+ void *freelist; /* SLUB: pointer to free object */
+ };
struct list_head lru; /* Pageout list, eg. active_list
* protected by zone->lru_lock !
*/
diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h
index ee9e314..2f1544e 100644
--- a/include/linux/mmzone.h
+++ b/include/linux/mmzone.h
@@ -784,6 +784,18 @@
void memory_present(int nid, unsigned long start, unsigned long end);
unsigned long __init node_memmap_size_bytes(int, unsigned long, unsigned long);
+/*
+ * If it is possible to have holes within a MAX_ORDER_NR_PAGES, then we
+ * need to check pfn validility within that MAX_ORDER_NR_PAGES block.
+ * pfn_valid_within() should be used in this case; we optimise this away
+ * when we have no holes within a MAX_ORDER_NR_PAGES block.
+ */
+#ifdef CONFIG_HOLES_IN_ZONE
+#define pfn_valid_within(pfn) pfn_valid(pfn)
+#else
+#define pfn_valid_within(pfn) (1)
+#endif
+
#endif /* !__ASSEMBLY__ */
#endif /* __KERNEL__ */
#endif /* _LINUX_MMZONE_H */
diff --git a/include/linux/page-flags.h b/include/linux/page-flags.h
index 9632659..ae2d79f 100644
--- a/include/linux/page-flags.h
+++ b/include/linux/page-flags.h
@@ -6,6 +6,7 @@
#define PAGE_FLAGS_H
#include <linux/types.h>
+#include <linux/mm_types.h>
/*
* Various page->flags bits:
@@ -82,13 +83,11 @@
#define PG_private 11 /* If pagecache, has fs-private data */
#define PG_writeback 12 /* Page is under writeback */
-#define PG_nosave 13 /* Used for system suspend/resume */
#define PG_compound 14 /* Part of a compound page */
#define PG_swapcache 15 /* Swap page: swp_entry_t in private */
#define PG_mappedtodisk 16 /* Has blocks allocated on-disk */
#define PG_reclaim 17 /* To be reclaimed asap */
-#define PG_nosave_free 18 /* Used for system suspend/resume */
#define PG_buddy 19 /* Page is free, on buddy lists */
/* PG_owner_priv_1 users should have descriptive aliases */
@@ -214,16 +213,6 @@
ret; \
})
-#define PageNosave(page) test_bit(PG_nosave, &(page)->flags)
-#define SetPageNosave(page) set_bit(PG_nosave, &(page)->flags)
-#define TestSetPageNosave(page) test_and_set_bit(PG_nosave, &(page)->flags)
-#define ClearPageNosave(page) clear_bit(PG_nosave, &(page)->flags)
-#define TestClearPageNosave(page) test_and_clear_bit(PG_nosave, &(page)->flags)
-
-#define PageNosaveFree(page) test_bit(PG_nosave_free, &(page)->flags)
-#define SetPageNosaveFree(page) set_bit(PG_nosave_free, &(page)->flags)
-#define ClearPageNosaveFree(page) clear_bit(PG_nosave_free, &(page)->flags)
-
#define PageBuddy(page) test_bit(PG_buddy, &(page)->flags)
#define __SetPageBuddy(page) __set_bit(PG_buddy, &(page)->flags)
#define __ClearPageBuddy(page) __clear_bit(PG_buddy, &(page)->flags)
@@ -241,6 +230,34 @@
#define __SetPageCompound(page) __set_bit(PG_compound, &(page)->flags)
#define __ClearPageCompound(page) __clear_bit(PG_compound, &(page)->flags)
+/*
+ * PG_reclaim is used in combination with PG_compound to mark the
+ * head and tail of a compound page
+ *
+ * PG_compound & PG_reclaim => Tail page
+ * PG_compound & ~PG_reclaim => Head page
+ */
+
+#define PG_head_tail_mask ((1L << PG_compound) | (1L << PG_reclaim))
+
+#define PageTail(page) ((page->flags & PG_head_tail_mask) \
+ == PG_head_tail_mask)
+
+static inline void __SetPageTail(struct page *page)
+{
+ page->flags |= PG_head_tail_mask;
+}
+
+static inline void __ClearPageTail(struct page *page)
+{
+ page->flags &= ~PG_head_tail_mask;
+}
+
+#define PageHead(page) ((page->flags & PG_head_tail_mask) \
+ == (1L << PG_compound))
+#define __SetPageHead(page) __SetPageCompound(page)
+#define __ClearPageHead(page) __ClearPageCompound(page)
+
#ifdef CONFIG_SWAP
#define PageSwapCache(page) test_bit(PG_swapcache, &(page)->flags)
#define SetPageSwapCache(page) set_bit(PG_swapcache, &(page)->flags)
diff --git a/include/linux/pagemap.h b/include/linux/pagemap.h
index 7a8dcb8..b4def5e 100644
--- a/include/linux/pagemap.h
+++ b/include/linux/pagemap.h
@@ -95,12 +95,23 @@
extern struct page * grab_cache_page_nowait(struct address_space *mapping,
unsigned long index);
+extern struct page * read_cache_page_async(struct address_space *mapping,
+ unsigned long index, filler_t *filler,
+ void *data);
extern struct page * read_cache_page(struct address_space *mapping,
unsigned long index, filler_t *filler,
void *data);
extern int read_cache_pages(struct address_space *mapping,
struct list_head *pages, filler_t *filler, void *data);
+static inline struct page *read_mapping_page_async(
+ struct address_space *mapping,
+ unsigned long index, void *data)
+{
+ filler_t *filler = (filler_t *)mapping->a_ops->readpage;
+ return read_cache_page_async(mapping, index, filler, data);
+}
+
static inline struct page *read_mapping_page(struct address_space *mapping,
unsigned long index, void *data)
{
diff --git a/include/linux/poison.h b/include/linux/poison.h
index 89580b7..95f518b 100644
--- a/include/linux/poison.h
+++ b/include/linux/poison.h
@@ -18,6 +18,9 @@
#define RED_INACTIVE 0x5A2CF071UL /* when obj is inactive */
#define RED_ACTIVE 0x170FC2A5UL /* when obj is active */
+#define SLUB_RED_INACTIVE 0xbb
+#define SLUB_RED_ACTIVE 0xcc
+
/* ...and for poisoning */
#define POISON_INUSE 0x5a /* for use-uninitialised poisoning */
#define POISON_FREE 0x6b /* for use-after-free poisoning */
diff --git a/include/linux/proc_fs.h b/include/linux/proc_fs.h
index be4652a..f4f7a63 100644
--- a/include/linux/proc_fs.h
+++ b/include/linux/proc_fs.h
@@ -104,6 +104,7 @@
unsigned long task_vsize(struct mm_struct *);
int task_statm(struct mm_struct *, int *, int *, int *, int *);
char *task_mem(struct mm_struct *, char *);
+void clear_refs_smap(struct mm_struct *mm);
extern struct proc_dir_entry *create_proc_entry(const char *name, mode_t mode,
struct proc_dir_entry *parent);
diff --git a/include/linux/quicklist.h b/include/linux/quicklist.h
new file mode 100644
index 0000000..9371c61
--- /dev/null
+++ b/include/linux/quicklist.h
@@ -0,0 +1,94 @@
+#ifndef LINUX_QUICKLIST_H
+#define LINUX_QUICKLIST_H
+/*
+ * Fast allocations and disposal of pages. Pages must be in the condition
+ * as needed after allocation when they are freed. Per cpu lists of pages
+ * are kept that only contain node local pages.
+ *
+ * (C) 2007, SGI. Christoph Lameter <clameter@sgi.com>
+ */
+#include <linux/kernel.h>
+#include <linux/gfp.h>
+#include <linux/percpu.h>
+
+#ifdef CONFIG_QUICKLIST
+
+struct quicklist {
+ void *page;
+ int nr_pages;
+};
+
+DECLARE_PER_CPU(struct quicklist, quicklist)[CONFIG_NR_QUICK];
+
+/*
+ * The two key functions quicklist_alloc and quicklist_free are inline so
+ * that they may be custom compiled for the platform.
+ * Specifying a NULL ctor can remove constructor support. Specifying
+ * a constant quicklist allows the determination of the exact address
+ * in the per cpu area.
+ *
+ * The fast patch in quicklist_alloc touched only a per cpu cacheline and
+ * the first cacheline of the page itself. There is minmal overhead involved.
+ */
+static inline void *quicklist_alloc(int nr, gfp_t flags, void (*ctor)(void *))
+{
+ struct quicklist *q;
+ void **p = NULL;
+
+ q =&get_cpu_var(quicklist)[nr];
+ p = q->page;
+ if (likely(p)) {
+ q->page = p[0];
+ p[0] = NULL;
+ q->nr_pages--;
+ }
+ put_cpu_var(quicklist);
+ if (likely(p))
+ return p;
+
+ p = (void *)__get_free_page(flags | __GFP_ZERO);
+ if (ctor && p)
+ ctor(p);
+ return p;
+}
+
+static inline void __quicklist_free(int nr, void (*dtor)(void *), void *p,
+ struct page *page)
+{
+ struct quicklist *q;
+ int nid = page_to_nid(page);
+
+ if (unlikely(nid != numa_node_id())) {
+ if (dtor)
+ dtor(p);
+ __free_page(page);
+ return;
+ }
+
+ q = &get_cpu_var(quicklist)[nr];
+ *(void **)p = q->page;
+ q->page = p;
+ q->nr_pages++;
+ put_cpu_var(quicklist);
+}
+
+static inline void quicklist_free(int nr, void (*dtor)(void *), void *pp)
+{
+ __quicklist_free(nr, dtor, pp, virt_to_page(pp));
+}
+
+static inline void quicklist_free_page(int nr, void (*dtor)(void *),
+ struct page *page)
+{
+ __quicklist_free(nr, dtor, page_address(page), page);
+}
+
+void quicklist_trim(int nr, void (*dtor)(void *),
+ unsigned long min_pages, unsigned long max_free);
+
+unsigned long quicklist_total_size(void);
+
+#endif
+
+#endif /* LINUX_QUICKLIST_H */
+
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index 586aaba..aa2653a 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -39,7 +39,8 @@
#define PORT_RSA 13
#define PORT_NS16550A 14
#define PORT_XSCALE 15
-#define PORT_MAX_8250 15 /* max port ID */
+#define PORT_RM9000 16 /* PMC-Sierra RM9xxx internal UART */
+#define PORT_MAX_8250 16 /* max port ID */
/*
* ARM specific type numbers. These are not currently guaranteed
@@ -135,6 +136,9 @@
/* Xilinx uartlite */
#define PORT_UARTLITE 74
+/* Blackfin bf5xx */
+#define PORT_BFIN 75
+
#ifdef __KERNEL__
#include <linux/compiler.h>
@@ -230,6 +234,8 @@
#define UPIO_MEM32 (3)
#define UPIO_AU (4) /* Au1x00 type IO */
#define UPIO_TSI (5) /* Tsi108/109 type IO */
+#define UPIO_DWAPB (6) /* DesignWare APB UART */
+#define UPIO_RM9000 (7) /* RM9000 type IO */
unsigned int read_status_mask; /* driver specific */
unsigned int ignore_status_mask; /* driver specific */
@@ -260,6 +266,7 @@
#define UPF_CONS_FLOW ((__force upf_t) (1 << 23))
#define UPF_SHARE_IRQ ((__force upf_t) (1 << 24))
#define UPF_BOOT_AUTOCONF ((__force upf_t) (1 << 28))
+#define UPF_FIXED_PORT ((__force upf_t) (1 << 29))
#define UPF_DEAD ((__force upf_t) (1 << 30))
#define UPF_IOREMAP ((__force upf_t) (1 << 31))
@@ -276,6 +283,7 @@
struct device *dev; /* parent device */
unsigned char hub6; /* this should be in the 8250 driver */
unsigned char unused[3];
+ void *private_data; /* generic platform data pointer */
};
/*
diff --git a/include/linux/serial_reg.h b/include/linux/serial_reg.h
index 3c8a6aa..1c5ed7d 100644
--- a/include/linux/serial_reg.h
+++ b/include/linux/serial_reg.h
@@ -38,6 +38,8 @@
#define UART_IIR_RDI 0x04 /* Receiver data interrupt */
#define UART_IIR_RLSI 0x06 /* Receiver line status interrupt */
+#define UART_IIR_BUSY 0x07 /* DesignWare APB Busy Detect */
+
#define UART_FCR 2 /* Out: FIFO Control Register */
#define UART_FCR_ENABLE_FIFO 0x01 /* Enable the FIFO */
#define UART_FCR_CLEAR_RCVR 0x02 /* Clear the RCVR FIFO */
diff --git a/include/linux/slab.h b/include/linux/slab.h
index 1ef822e..71829ef 100644
--- a/include/linux/slab.h
+++ b/include/linux/slab.h
@@ -21,28 +21,25 @@
* The ones marked DEBUG are only valid if CONFIG_SLAB_DEBUG is set.
*/
#define SLAB_DEBUG_FREE 0x00000100UL /* DEBUG: Perform (expensive) checks on free */
-#define SLAB_DEBUG_INITIAL 0x00000200UL /* DEBUG: Call constructor (as verifier) */
#define SLAB_RED_ZONE 0x00000400UL /* DEBUG: Red zone objs in a cache */
#define SLAB_POISON 0x00000800UL /* DEBUG: Poison objects */
#define SLAB_HWCACHE_ALIGN 0x00002000UL /* Align objs on cache lines */
#define SLAB_CACHE_DMA 0x00004000UL /* Use GFP_DMA memory */
-#define SLAB_MUST_HWCACHE_ALIGN 0x00008000UL /* Force alignment even if debuggin is active */
#define SLAB_STORE_USER 0x00010000UL /* DEBUG: Store the last owner for bug hunting */
#define SLAB_RECLAIM_ACCOUNT 0x00020000UL /* Objects are reclaimable */
#define SLAB_PANIC 0x00040000UL /* Panic if kmem_cache_create() fails */
#define SLAB_DESTROY_BY_RCU 0x00080000UL /* Defer freeing slabs to RCU */
#define SLAB_MEM_SPREAD 0x00100000UL /* Spread some memory over cpuset */
+#define SLAB_TRACE 0x00200000UL /* Trace allocations and frees */
/* Flags passed to a constructor functions */
#define SLAB_CTOR_CONSTRUCTOR 0x001UL /* If not set, then deconstructor */
-#define SLAB_CTOR_ATOMIC 0x002UL /* Tell constructor it can't sleep */
-#define SLAB_CTOR_VERIFY 0x004UL /* Tell constructor it's a verify call */
/*
* struct kmem_cache related prototypes
*/
void __init kmem_cache_init(void);
-extern int slab_is_available(void);
+int slab_is_available(void);
struct kmem_cache *kmem_cache_create(const char *, size_t, size_t,
unsigned long,
@@ -57,6 +54,18 @@
const char *kmem_cache_name(struct kmem_cache *);
int kmem_ptr_validate(struct kmem_cache *cachep, const void *ptr);
+/*
+ * Please use this macro to create slab caches. Simply specify the
+ * name of the structure and maybe some flags that are listed above.
+ *
+ * The alignment of the struct determines object alignment. If you
+ * f.e. add ____cacheline_aligned_in_smp to the struct declaration
+ * then the objects will be properly aligned in SMP configurations.
+ */
+#define KMEM_CACHE(__struct, __flags) kmem_cache_create(#__struct,\
+ sizeof(struct __struct), __alignof__(struct __struct),\
+ (__flags), NULL, NULL)
+
#ifdef CONFIG_NUMA
extern void *kmem_cache_alloc_node(struct kmem_cache *, gfp_t flags, int node);
#else
@@ -72,8 +81,9 @@
*/
void *__kmalloc(size_t, gfp_t);
void *__kzalloc(size_t, gfp_t);
+void * __must_check krealloc(const void *, size_t, gfp_t);
void kfree(const void *);
-unsigned int ksize(const void *);
+size_t ksize(const void *);
/**
* kcalloc - allocate memory for an array. The memory is set to zero.
@@ -94,9 +104,14 @@
* the appropriate general cache at compile time.
*/
-#ifdef CONFIG_SLAB
-#include <linux/slab_def.h>
+#if defined(CONFIG_SLAB) || defined(CONFIG_SLUB)
+#ifdef CONFIG_SLUB
+#include <linux/slub_def.h>
#else
+#include <linux/slab_def.h>
+#endif /* !CONFIG_SLUB */
+#else
+
/*
* Fallback definitions for an allocator not wanting to provide
* its own optimized kmalloc definitions (like SLOB).
@@ -183,7 +198,7 @@
* allocator where we care about the real place the memory allocation
* request comes from.
*/
-#ifdef CONFIG_DEBUG_SLAB
+#if defined(CONFIG_DEBUG_SLAB) || defined(CONFIG_SLUB)
extern void *__kmalloc_track_caller(size_t, gfp_t, void*);
#define kmalloc_track_caller(size, flags) \
__kmalloc_track_caller(size, flags, __builtin_return_address(0))
@@ -201,7 +216,7 @@
* standard allocator where we care about the real place the memory
* allocation request comes from.
*/
-#ifdef CONFIG_DEBUG_SLAB
+#if defined(CONFIG_DEBUG_SLAB) || defined(CONFIG_SLUB)
extern void *__kmalloc_node_track_caller(size_t, gfp_t, int, void *);
#define kmalloc_node_track_caller(size, flags, node) \
__kmalloc_node_track_caller(size, flags, node, \
@@ -218,6 +233,9 @@
#endif /* DEBUG_SLAB */
+extern const struct seq_operations slabinfo_op;
+ssize_t slabinfo_write(struct file *, const char __user *, size_t, loff_t *);
+
#endif /* __KERNEL__ */
#endif /* _LINUX_SLAB_H */
diff --git a/include/linux/slub_def.h b/include/linux/slub_def.h
new file mode 100644
index 0000000..ea27065
--- /dev/null
+++ b/include/linux/slub_def.h
@@ -0,0 +1,206 @@
+#ifndef _LINUX_SLUB_DEF_H
+#define _LINUX_SLUB_DEF_H
+
+/*
+ * SLUB : A Slab allocator without object queues.
+ *
+ * (C) 2007 SGI, Christoph Lameter <clameter@sgi.com>
+ */
+#include <linux/types.h>
+#include <linux/gfp.h>
+#include <linux/workqueue.h>
+#include <linux/kobject.h>
+
+struct kmem_cache_node {
+ spinlock_t list_lock; /* Protect partial list and nr_partial */
+ unsigned long nr_partial;
+ atomic_long_t nr_slabs;
+ struct list_head partial;
+ struct list_head full;
+};
+
+/*
+ * Slab cache management.
+ */
+struct kmem_cache {
+ /* Used for retriving partial slabs etc */
+ unsigned long flags;
+ int size; /* The size of an object including meta data */
+ int objsize; /* The size of an object without meta data */
+ int offset; /* Free pointer offset. */
+ unsigned int order;
+
+ /*
+ * Avoid an extra cache line for UP, SMP and for the node local to
+ * struct kmem_cache.
+ */
+ struct kmem_cache_node local_node;
+
+ /* Allocation and freeing of slabs */
+ int objects; /* Number of objects in slab */
+ int refcount; /* Refcount for slab cache destroy */
+ void (*ctor)(void *, struct kmem_cache *, unsigned long);
+ void (*dtor)(void *, struct kmem_cache *, unsigned long);
+ int inuse; /* Offset to metadata */
+ int align; /* Alignment */
+ const char *name; /* Name (only for display!) */
+ struct list_head list; /* List of slab caches */
+ struct kobject kobj; /* For sysfs */
+
+#ifdef CONFIG_NUMA
+ int defrag_ratio;
+ struct kmem_cache_node *node[MAX_NUMNODES];
+#endif
+ struct page *cpu_slab[NR_CPUS];
+};
+
+/*
+ * Kmalloc subsystem.
+ */
+#define KMALLOC_SHIFT_LOW 3
+
+#ifdef CONFIG_LARGE_ALLOCS
+#define KMALLOC_SHIFT_HIGH 25
+#else
+#if !defined(CONFIG_MMU) || NR_CPUS > 512 || MAX_NUMNODES > 256
+#define KMALLOC_SHIFT_HIGH 20
+#else
+#define KMALLOC_SHIFT_HIGH 18
+#endif
+#endif
+
+/*
+ * We keep the general caches in an array of slab caches that are used for
+ * 2^x bytes of allocations.
+ */
+extern struct kmem_cache kmalloc_caches[KMALLOC_SHIFT_HIGH + 1];
+
+/*
+ * Sorry that the following has to be that ugly but some versions of GCC
+ * have trouble with constant propagation and loops.
+ */
+static inline int kmalloc_index(int size)
+{
+ /*
+ * We should return 0 if size == 0 but we use the smallest object
+ * here for SLAB legacy reasons.
+ */
+ WARN_ON_ONCE(size == 0);
+
+ if (size > 64 && size <= 96)
+ return 1;
+ if (size > 128 && size <= 192)
+ return 2;
+ if (size <= 8) return 3;
+ if (size <= 16) return 4;
+ if (size <= 32) return 5;
+ if (size <= 64) return 6;
+ if (size <= 128) return 7;
+ if (size <= 256) return 8;
+ if (size <= 512) return 9;
+ if (size <= 1024) return 10;
+ if (size <= 2 * 1024) return 11;
+ if (size <= 4 * 1024) return 12;
+ if (size <= 8 * 1024) return 13;
+ if (size <= 16 * 1024) return 14;
+ if (size <= 32 * 1024) return 15;
+ if (size <= 64 * 1024) return 16;
+ if (size <= 128 * 1024) return 17;
+ if (size <= 256 * 1024) return 18;
+#if KMALLOC_SHIFT_HIGH > 18
+ if (size <= 512 * 1024) return 19;
+ if (size <= 1024 * 1024) return 20;
+#endif
+#if KMALLOC_SHIFT_HIGH > 20
+ if (size <= 2 * 1024 * 1024) return 21;
+ if (size <= 4 * 1024 * 1024) return 22;
+ if (size <= 8 * 1024 * 1024) return 23;
+ if (size <= 16 * 1024 * 1024) return 24;
+ if (size <= 32 * 1024 * 1024) return 25;
+#endif
+ return -1;
+
+/*
+ * What we really wanted to do and cannot do because of compiler issues is:
+ * int i;
+ * for (i = KMALLOC_SHIFT_LOW; i <= KMALLOC_SHIFT_HIGH; i++)
+ * if (size <= (1 << i))
+ * return i;
+ */
+}
+
+/*
+ * Find the slab cache for a given combination of allocation flags and size.
+ *
+ * This ought to end up with a global pointer to the right cache
+ * in kmalloc_caches.
+ */
+static inline struct kmem_cache *kmalloc_slab(size_t size)
+{
+ int index = kmalloc_index(size);
+
+ if (index == 0)
+ return NULL;
+
+ if (index < 0) {
+ /*
+ * Generate a link failure. Would be great if we could
+ * do something to stop the compile here.
+ */
+ extern void __kmalloc_size_too_large(void);
+ __kmalloc_size_too_large();
+ }
+ return &kmalloc_caches[index];
+}
+
+#ifdef CONFIG_ZONE_DMA
+#define SLUB_DMA __GFP_DMA
+#else
+/* Disable DMA functionality */
+#define SLUB_DMA 0
+#endif
+
+static inline void *kmalloc(size_t size, gfp_t flags)
+{
+ if (__builtin_constant_p(size) && !(flags & SLUB_DMA)) {
+ struct kmem_cache *s = kmalloc_slab(size);
+
+ if (!s)
+ return NULL;
+
+ return kmem_cache_alloc(s, flags);
+ } else
+ return __kmalloc(size, flags);
+}
+
+static inline void *kzalloc(size_t size, gfp_t flags)
+{
+ if (__builtin_constant_p(size) && !(flags & SLUB_DMA)) {
+ struct kmem_cache *s = kmalloc_slab(size);
+
+ if (!s)
+ return NULL;
+
+ return kmem_cache_zalloc(s, flags);
+ } else
+ return __kzalloc(size, flags);
+}
+
+#ifdef CONFIG_NUMA
+extern void *__kmalloc_node(size_t size, gfp_t flags, int node);
+
+static inline void *kmalloc_node(size_t size, gfp_t flags, int node)
+{
+ if (__builtin_constant_p(size) && !(flags & SLUB_DMA)) {
+ struct kmem_cache *s = kmalloc_slab(size);
+
+ if (!s)
+ return NULL;
+
+ return kmem_cache_alloc_node(s, flags, node);
+ } else
+ return __kmalloc_node(size, flags, node);
+}
+#endif
+
+#endif /* _LINUX_SLUB_DEF_H */
diff --git a/include/linux/spi/ad7877.h b/include/linux/spi/ad7877.h
new file mode 100644
index 0000000..cdbed81
--- /dev/null
+++ b/include/linux/spi/ad7877.h
@@ -0,0 +1,24 @@
+/* linux/spi/ad7877.h */
+
+/* Touchscreen characteristics vary between boards and models. The
+ * platform_data for the device's "struct device" holds this information.
+ *
+ * It's OK if the min/max values are zero.
+ */
+struct ad7877_platform_data {
+ u16 model; /* 7877 */
+ u16 vref_delay_usecs; /* 0 for external vref; etc */
+ u16 x_plate_ohms;
+ u16 y_plate_ohms;
+
+ u16 x_min, x_max;
+ u16 y_min, y_max;
+ u16 pressure_min, pressure_max;
+
+ u8 stopacq_polarity; /* 1 = Active HIGH, 0 = Active LOW */
+ u8 first_conversion_delay; /* 0 = 0.5us, 1 = 128us, 2 = 1ms, 3 = 8ms */
+ u8 acquisition_time; /* 0 = 2us, 1 = 4us, 2 = 8us, 3 = 16us */
+ u8 averaging; /* 0 = 1, 1 = 4, 2 = 8, 3 = 16 */
+ u8 pen_down_acc_interval; /* 0 = covert once, 1 = every 0.5 ms,
+ 2 = ever 1 ms, 3 = every 8 ms,*/
+};
diff --git a/include/linux/suspend.h b/include/linux/suspend.h
index bf99bd4..96868be 100644
--- a/include/linux/suspend.h
+++ b/include/linux/suspend.h
@@ -8,6 +8,7 @@
#include <linux/notifier.h>
#include <linux/init.h>
#include <linux/pm.h>
+#include <linux/mm.h>
/* struct pbe is used for creating lists of pages that should be restored
* atomically during the resume from disk, because the page frames they have
@@ -23,36 +24,32 @@
extern void drain_local_pages(void);
extern void mark_free_pages(struct zone *zone);
-#ifdef CONFIG_PM
-/* kernel/power/swsusp.c */
-extern int software_suspend(void);
-
-#if defined(CONFIG_VT) && defined(CONFIG_VT_CONSOLE)
+#if defined(CONFIG_PM) && defined(CONFIG_VT) && defined(CONFIG_VT_CONSOLE)
extern int pm_prepare_console(void);
extern void pm_restore_console(void);
#else
static inline int pm_prepare_console(void) { return 0; }
static inline void pm_restore_console(void) {}
-#endif /* defined(CONFIG_VT) && defined(CONFIG_VT_CONSOLE) */
+#endif
+
+#if defined(CONFIG_PM) && defined(CONFIG_SOFTWARE_SUSPEND)
+/* kernel/power/snapshot.c */
+extern void __init register_nosave_region(unsigned long, unsigned long);
+extern int swsusp_page_is_forbidden(struct page *);
+extern void swsusp_set_page_free(struct page *);
+extern void swsusp_unset_page_free(struct page *);
+extern unsigned long get_safe_page(gfp_t gfp_mask);
#else
-static inline int software_suspend(void)
-{
- printk("Warning: fake suspend called\n");
- return -ENOSYS;
-}
-#endif /* CONFIG_PM */
+static inline void register_nosave_region(unsigned long b, unsigned long e) {}
+static inline int swsusp_page_is_forbidden(struct page *p) { return 0; }
+static inline void swsusp_set_page_free(struct page *p) {}
+static inline void swsusp_unset_page_free(struct page *p) {}
+#endif /* defined(CONFIG_PM) && defined(CONFIG_SOFTWARE_SUSPEND) */
void save_processor_state(void);
void restore_processor_state(void);
struct saved_context;
void __save_processor_state(struct saved_context *ctxt);
void __restore_processor_state(struct saved_context *ctxt);
-unsigned long get_safe_page(gfp_t gfp_mask);
-
-/*
- * XXX: We try to keep some more pages free so that I/O operations succeed
- * without paging. Might this be more?
- */
-#define PAGES_FOR_IO 1024
#endif /* _LINUX_SWSUSP_H */
diff --git a/include/linux/usb_sl811.h b/include/linux/usb_sl811.h
new file mode 100644
index 0000000..4f2d012
--- /dev/null
+++ b/include/linux/usb_sl811.h
@@ -0,0 +1,26 @@
+
+/*
+ * board initialization should put one of these into dev->platform_data
+ * and place the sl811hs onto platform_bus named "sl811-hcd".
+ */
+
+struct sl811_platform_data {
+ unsigned can_wakeup:1;
+
+ /* given port_power, msec/2 after power on till power good */
+ u8 potpg;
+
+ /* mA/2 power supplied on this port (max = default = 250) */
+ u8 power;
+
+ /* sl811 relies on an external source of VBUS current */
+ void (*port_power)(struct device *dev, int is_on);
+
+ /* pulse sl811 nRST (probably with a GPIO) */
+ void (*reset)(struct device *dev);
+
+ // some boards need something like these:
+ // int (*check_overcurrent)(struct device *dev);
+ // void (*clock_enable)(struct device *dev, int is_on);
+};
+
diff --git a/include/pcmcia/ds.h b/include/pcmcia/ds.h
index 8c339f5..90ef552 100644
--- a/include/pcmcia/ds.h
+++ b/include/pcmcia/ds.h
@@ -108,6 +108,11 @@
struct pcmcia_socket;
struct config_t;
+struct pcmcia_dynids {
+ spinlock_t lock;
+ struct list_head list;
+};
+
struct pcmcia_driver {
int (*probe) (struct pcmcia_device *dev);
void (*remove) (struct pcmcia_device *dev);
@@ -118,6 +123,7 @@
struct module *owner;
struct pcmcia_device_id *id_table;
struct device_driver drv;
+ struct pcmcia_dynids dynids;
};
/* driver registration */
diff --git a/init/Kconfig b/init/Kconfig
index 29d9e47..ebe04f5 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -356,7 +356,7 @@
config UID16
bool "Enable 16-bit UID system calls" if EMBEDDED
- depends on ARM || CRIS || FRV || H8300 || X86_32 || M68K || (S390 && !64BIT) || SUPERH || SPARC32 || (SPARC64 && SPARC32_COMPAT) || UML || (X86_64 && IA32_EMULATION)
+ depends on ARM || BFIN || CRIS || FRV || H8300 || X86_32 || M68K || (S390 && !64BIT) || SUPERH || SPARC32 || (SPARC64 && SPARC32_COMPAT) || UML || (X86_64 && IA32_EMULATION)
default y
help
This enables the legacy 16-bit UID syscall wrappers.
@@ -478,15 +478,6 @@
option replaces shmem and tmpfs with the much simpler ramfs code,
which may be appropriate on small systems without swap.
-config SLAB
- default y
- bool "Use full SLAB allocator" if (EMBEDDED && !SMP && !SPARSEMEM)
- help
- Disabling this replaces the advanced SLAB allocator and
- kmalloc support with the drastically simpler SLOB allocator.
- SLOB is more space efficient but does not scale well and is
- more susceptible to fragmentation.
-
config VM_EVENT_COUNTERS
default y
bool "Enable VM event counters for /proc/vmstat" if EMBEDDED
@@ -496,6 +487,46 @@
on EMBEDDED systems. /proc/vmstat will only show page counts
if VM event counters are disabled.
+choice
+ prompt "Choose SLAB allocator"
+ default SLAB
+ help
+ This option allows to select a slab allocator.
+
+config SLAB
+ bool "SLAB"
+ help
+ The regular slab allocator that is established and known to work
+ well in all environments. It organizes chache hot objects in
+ per cpu and per node queues. SLAB is the default choice for
+ slab allocator.
+
+config SLUB
+ depends on EXPERIMENTAL && !ARCH_USES_SLAB_PAGE_STRUCT
+ bool "SLUB (Unqueued Allocator)"
+ help
+ SLUB is a slab allocator that minimizes cache line usage
+ instead of managing queues of cached objects (SLAB approach).
+ Per cpu caching is realized using slabs of objects instead
+ of queues of objects. SLUB can use memory efficiently
+ way and has enhanced diagnostics.
+
+config SLOB
+#
+# SLOB cannot support SMP because SLAB_DESTROY_BY_RCU does not work
+# properly.
+#
+ depends on EMBEDDED && !SMP && !SPARSEMEM
+ bool "SLOB (Simple Allocator)"
+ help
+ SLOB replaces the SLAB allocator with a drastically simpler
+ allocator. SLOB is more space efficient that SLAB but does not
+ scale well (single lock for all operations) and is more susceptible
+ to fragmentation. SLOB it is a great choice to reduce
+ memory usage and code size for embedded systems.
+
+endchoice
+
endmenu # General setup
config RT_MUTEXES
@@ -511,10 +542,6 @@
default 0 if BASE_FULL
default 1 if !BASE_FULL
-config SLOB
- default !SLAB
- bool
-
menu "Loadable module support"
config MODULES
diff --git a/init/do_mounts_initrd.c b/init/do_mounts_initrd.c
index 2cfd7cb..b222ce9 100644
--- a/init/do_mounts_initrd.c
+++ b/init/do_mounts_initrd.c
@@ -55,11 +55,12 @@
sys_mount(".", "/", NULL, MS_MOVE, NULL);
sys_chroot(".");
- current->flags |= PF_NOFREEZE;
pid = kernel_thread(do_linuxrc, "/linuxrc", SIGCHLD);
if (pid > 0) {
- while (pid != sys_wait4(-1, NULL, 0, NULL))
+ while (pid != sys_wait4(-1, NULL, 0, NULL)) {
+ try_to_freeze();
yield();
+ }
}
/* move initrd to rootfs' /old */
diff --git a/init/main.c b/init/main.c
index df982ff..0e22f40 100644
--- a/init/main.c
+++ b/init/main.c
@@ -384,11 +384,6 @@
static void __init smp_init(void)
{
unsigned int cpu;
- unsigned highest = 0;
-
- for_each_cpu_mask(cpu, cpu_possible_map)
- highest = cpu;
- nr_cpu_ids = highest + 1;
/* FIXME: This should be done in userspace --RR */
for_each_present_cpu(cpu) {
diff --git a/ipc/mqueue.c b/ipc/mqueue.c
index 554ac36..d17821d 100644
--- a/ipc/mqueue.c
+++ b/ipc/mqueue.c
@@ -215,8 +215,7 @@
{
struct mqueue_inode_info *p = (struct mqueue_inode_info *) foo;
- if ((flags & (SLAB_CTOR_VERIFY | SLAB_CTOR_CONSTRUCTOR)) ==
- SLAB_CTOR_CONSTRUCTOR)
+ if (flags & SLAB_CTOR_CONSTRUCTOR)
inode_init_once(&p->vfs_inode);
}
diff --git a/kernel/cpuset.c b/kernel/cpuset.c
index f382b0f..d240349 100644
--- a/kernel/cpuset.c
+++ b/kernel/cpuset.c
@@ -2351,6 +2351,8 @@
* z's node is in our tasks mems_allowed, yes. If it's not a
* __GFP_HARDWALL request and this zone's nodes is in the nearest
* mem_exclusive cpuset ancestor to this tasks cpuset, yes.
+ * If the task has been OOM killed and has access to memory reserves
+ * as specified by the TIF_MEMDIE flag, yes.
* Otherwise, no.
*
* If __GFP_HARDWALL is set, cpuset_zone_allowed_softwall()
@@ -2368,7 +2370,8 @@
* calls get to this routine, we should just shut up and say 'yes'.
*
* GFP_USER allocations are marked with the __GFP_HARDWALL bit,
- * and do not allow allocations outside the current tasks cpuset.
+ * and do not allow allocations outside the current tasks cpuset
+ * unless the task has been OOM killed as is marked TIF_MEMDIE.
* GFP_KERNEL allocations are not so marked, so can escape to the
* nearest enclosing mem_exclusive ancestor cpuset.
*
@@ -2392,6 +2395,7 @@
* affect that:
* in_interrupt - any node ok (current task context irrelevant)
* GFP_ATOMIC - any node ok
+ * TIF_MEMDIE - any node ok
* GFP_KERNEL - any node in enclosing mem_exclusive cpuset ok
* GFP_USER - only nodes in current tasks mems allowed ok.
*
@@ -2413,6 +2417,12 @@
might_sleep_if(!(gfp_mask & __GFP_HARDWALL));
if (node_isset(node, current->mems_allowed))
return 1;
+ /*
+ * Allow tasks that have access to memory reserves because they have
+ * been OOM killed to get memory anywhere.
+ */
+ if (unlikely(test_thread_flag(TIF_MEMDIE)))
+ return 1;
if (gfp_mask & __GFP_HARDWALL) /* If hardwall request, stop here */
return 0;
@@ -2438,7 +2448,9 @@
*
* If we're in interrupt, yes, we can always allocate.
* If __GFP_THISNODE is set, yes, we can always allocate. If zone
- * z's node is in our tasks mems_allowed, yes. Otherwise, no.
+ * z's node is in our tasks mems_allowed, yes. If the task has been
+ * OOM killed and has access to memory reserves as specified by the
+ * TIF_MEMDIE flag, yes. Otherwise, no.
*
* The __GFP_THISNODE placement logic is really handled elsewhere,
* by forcibly using a zonelist starting at a specified node, and by
@@ -2462,6 +2474,12 @@
node = zone_to_nid(z);
if (node_isset(node, current->mems_allowed))
return 1;
+ /*
+ * Allow tasks that have access to memory reserves because they have
+ * been OOM killed to get memory anywhere.
+ */
+ if (unlikely(test_thread_flag(TIF_MEMDIE)))
+ return 1;
return 0;
}
diff --git a/kernel/delayacct.c b/kernel/delayacct.c
index 766d591..c0148ae 100644
--- a/kernel/delayacct.c
+++ b/kernel/delayacct.c
@@ -31,11 +31,7 @@
void delayacct_init(void)
{
- delayacct_cache = kmem_cache_create("delayacct_cache",
- sizeof(struct task_delay_info),
- 0,
- SLAB_PANIC,
- NULL, NULL);
+ delayacct_cache = KMEM_CACHE(task_delay_info, SLAB_PANIC);
delayacct_tsk_init(&init_task);
}
diff --git a/kernel/exit.c b/kernel/exit.c
index b55ed4c..9236924 100644
--- a/kernel/exit.c
+++ b/kernel/exit.c
@@ -1033,6 +1033,8 @@
static int eligible_child(pid_t pid, int options, struct task_struct *p)
{
+ int err;
+
if (pid > 0) {
if (p->pid != pid)
return 0;
@@ -1066,8 +1068,9 @@
if (delay_group_leader(p))
return 2;
- if (security_task_wait(p))
- return 0;
+ err = security_task_wait(p);
+ if (err)
+ return err;
return 1;
}
@@ -1449,6 +1452,7 @@
DECLARE_WAITQUEUE(wait, current);
struct task_struct *tsk;
int flag, retval;
+ int allowed, denied;
add_wait_queue(¤t->signal->wait_chldexit,&wait);
repeat:
@@ -1457,6 +1461,7 @@
* match our criteria, even if we are not able to reap it yet.
*/
flag = 0;
+ allowed = denied = 0;
current->state = TASK_INTERRUPTIBLE;
read_lock(&tasklist_lock);
tsk = current;
@@ -1472,6 +1477,12 @@
if (!ret)
continue;
+ if (unlikely(ret < 0)) {
+ denied = ret;
+ continue;
+ }
+ allowed = 1;
+
switch (p->state) {
case TASK_TRACED:
/*
@@ -1570,6 +1581,8 @@
goto repeat;
}
retval = -ECHILD;
+ if (unlikely(denied) && !allowed)
+ retval = denied;
end:
current->state = TASK_RUNNING;
remove_wait_queue(¤t->signal->wait_chldexit,&wait);
diff --git a/kernel/fork.c b/kernel/fork.c
index ffccefb..b7d169d 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -1425,8 +1425,7 @@
{
struct sighand_struct *sighand = data;
- if ((flags & (SLAB_CTOR_VERIFY | SLAB_CTOR_CONSTRUCTOR)) ==
- SLAB_CTOR_CONSTRUCTOR)
+ if (flags & SLAB_CTOR_CONSTRUCTOR)
spin_lock_init(&sighand->siglock);
}
diff --git a/kernel/pid.c b/kernel/pid.c
index 78f2aee..9c80bc2 100644
--- a/kernel/pid.c
+++ b/kernel/pid.c
@@ -412,7 +412,5 @@
set_bit(0, init_pid_ns.pidmap[0].page);
atomic_dec(&init_pid_ns.pidmap[0].nr_free);
- pid_cachep = kmem_cache_create("pid", sizeof(struct pid),
- __alignof__(struct pid),
- SLAB_PANIC, NULL, NULL);
+ pid_cachep = KMEM_CACHE(pid, SLAB_PANIC);
}
diff --git a/kernel/power/Kconfig b/kernel/power/Kconfig
index 51a4dd0..8777217 100644
--- a/kernel/power/Kconfig
+++ b/kernel/power/Kconfig
@@ -78,17 +78,22 @@
are likely to be bus or driver specific.
config SOFTWARE_SUSPEND
- bool "Software Suspend"
+ bool "Software Suspend (Hibernation)"
depends on PM && SWAP && ((X86 && (!SMP || SUSPEND_SMP)) || ((FRV || PPC32) && !SMP))
---help---
- Enable the suspend to disk (STD) functionality.
+ Enable the suspend to disk (STD) functionality, which is usually
+ called "hibernation" in user interfaces. STD checkpoints the
+ system and powers it off; and restores that checkpoint on reboot.
You can suspend your machine with 'echo disk > /sys/power/state'.
Alternatively, you can use the additional userland tools available
from <http://suspend.sf.net>.
In principle it does not require ACPI or APM, although for example
- ACPI will be used if available.
+ ACPI will be used for the final steps when it is available. One
+ of the reasons to use software suspend is that the firmware hooks
+ for suspend states like suspend-to-RAM (STR) often don't work very
+ well with Linux.
It creates an image which is saved in your active swap. Upon the next
boot, pass the 'resume=/dev/swappartition' argument to the kernel to
diff --git a/kernel/power/disk.c b/kernel/power/disk.c
index 8df51c2..0633137 100644
--- a/kernel/power/disk.c
+++ b/kernel/power/disk.c
@@ -130,15 +130,25 @@
{
int error;
+ /* The snapshot device should not be opened while we're running */
+ if (!atomic_add_unless(&snapshot_device_available, -1, 0))
+ return -EBUSY;
+
+ /* Allocate memory management structures */
+ error = create_basic_memory_bitmaps();
+ if (error)
+ goto Exit;
+
error = prepare_processes();
if (error)
- return error;
+ goto Finish;
if (pm_disk_mode == PM_DISK_TESTPROC) {
printk("swsusp debug: Waiting for 5 seconds.\n");
mdelay(5000);
goto Thaw;
}
+
/* Free memory before shutting down devices. */
error = swsusp_shrink_memory();
if (error)
@@ -196,6 +206,10 @@
resume_console();
Thaw:
unprepare_processes();
+ Finish:
+ free_basic_memory_bitmaps();
+ Exit:
+ atomic_inc(&snapshot_device_available);
return error;
}
@@ -239,13 +253,21 @@
}
pr_debug("PM: Checking swsusp image.\n");
-
error = swsusp_check();
if (error)
- goto Done;
+ goto Unlock;
+
+ /* The snapshot device should not be opened while we're running */
+ if (!atomic_add_unless(&snapshot_device_available, -1, 0)) {
+ error = -EBUSY;
+ goto Unlock;
+ }
+
+ error = create_basic_memory_bitmaps();
+ if (error)
+ goto Finish;
pr_debug("PM: Preparing processes for restore.\n");
-
error = prepare_processes();
if (error) {
swsusp_close();
@@ -280,7 +302,11 @@
printk(KERN_ERR "PM: Restore failed, recovering.\n");
unprepare_processes();
Done:
+ free_basic_memory_bitmaps();
+ Finish:
+ atomic_inc(&snapshot_device_available);
/* For success case, the suspend path will release the lock */
+ Unlock:
mutex_unlock(&pm_mutex);
pr_debug("PM: Resume from disk failed.\n");
return 0;
@@ -324,7 +350,34 @@
static ssize_t disk_show(struct kset *kset, char *buf)
{
- return sprintf(buf, "%s\n", pm_disk_modes[pm_disk_mode]);
+ int i;
+ char *start = buf;
+
+ for (i = PM_DISK_PLATFORM; i < PM_DISK_MAX; i++) {
+ if (!pm_disk_modes[i])
+ continue;
+ switch (i) {
+ case PM_DISK_SHUTDOWN:
+ case PM_DISK_REBOOT:
+ case PM_DISK_TEST:
+ case PM_DISK_TESTPROC:
+ break;
+ default:
+ if (pm_ops && pm_ops->enter &&
+ (i == pm_ops->pm_disk_mode))
+ break;
+ /* not a valid mode, continue with loop */
+ continue;
+ }
+ if (i == pm_disk_mode)
+ buf += sprintf(buf, "[%s]", pm_disk_modes[i]);
+ else
+ buf += sprintf(buf, "%s", pm_disk_modes[i]);
+ if (i+1 != PM_DISK_MAX)
+ buf += sprintf(buf, " ");
+ }
+ buf += sprintf(buf, "\n");
+ return buf-start;
}
diff --git a/kernel/power/main.c b/kernel/power/main.c
index b21c2a5..f6dda68 100644
--- a/kernel/power/main.c
+++ b/kernel/power/main.c
@@ -184,17 +184,21 @@
static const char * const pm_states[PM_SUSPEND_MAX] = {
[PM_SUSPEND_STANDBY] = "standby",
[PM_SUSPEND_MEM] = "mem",
-#ifdef CONFIG_SOFTWARE_SUSPEND
[PM_SUSPEND_DISK] = "disk",
-#endif
};
static inline int valid_state(suspend_state_t state)
{
/* Suspend-to-disk does not really need low-level support.
- * It can work with reboot if needed. */
+ * It can work with shutdown/reboot if needed. If it isn't
+ * configured, then it cannot be supported.
+ */
if (state == PM_SUSPEND_DISK)
+#ifdef CONFIG_SOFTWARE_SUSPEND
return 1;
+#else
+ return 0;
+#endif
/* all other states need lowlevel support and need to be
* valid to the lowlevel implementation, no valid callback
@@ -244,15 +248,6 @@
return error;
}
-/*
- * This is main interface to the outside world. It needs to be
- * called from process context.
- */
-int software_suspend(void)
-{
- return enter_state(PM_SUSPEND_DISK);
-}
-
/**
* pm_suspend - Externally visible function for suspending system.
diff --git a/kernel/power/power.h b/kernel/power/power.h
index 33bd94c..34b4354 100644
--- a/kernel/power/power.h
+++ b/kernel/power/power.h
@@ -14,8 +14,18 @@
#ifdef CONFIG_SOFTWARE_SUSPEND
-extern int pm_suspend_disk(void);
+/*
+ * Keep some memory free so that I/O operations can succeed without paging
+ * [Might this be more than 4 MB?]
+ */
+#define PAGES_FOR_IO ((4096 * 1024) >> PAGE_SHIFT)
+/*
+ * Keep 1 MB of memory free so that device drivers can allocate some pages in
+ * their .suspend() routines without breaking the suspend to disk.
+ */
+#define SPARE_PAGES ((1024 * 1024) >> PAGE_SHIFT)
+extern int pm_suspend_disk(void);
#else
static inline int pm_suspend_disk(void)
{
@@ -48,6 +58,8 @@
extern asmlinkage int swsusp_arch_suspend(void);
extern asmlinkage int swsusp_arch_resume(void);
+extern int create_basic_memory_bitmaps(void);
+extern void free_basic_memory_bitmaps(void);
extern unsigned int count_data_pages(void);
/**
@@ -138,30 +150,12 @@
#define PMOPS_ENTER 2
#define PMOPS_FINISH 3
-/**
- * The bitmap is used for tracing allocated swap pages
- *
- * The entire bitmap consists of a number of bitmap_page
- * structures linked with the help of the .next member.
- * Thus each page can be allocated individually, so we only
- * need to make 0-order memory allocations to create
- * the bitmap.
- */
+/* If unset, the snapshot device cannot be open. */
+extern atomic_t snapshot_device_available;
-#define BITMAP_PAGE_SIZE (PAGE_SIZE - sizeof(void *))
-#define BITMAP_PAGE_CHUNKS (BITMAP_PAGE_SIZE / sizeof(long))
-#define BITS_PER_CHUNK (sizeof(long) * 8)
-#define BITMAP_PAGE_BITS (BITMAP_PAGE_CHUNKS * BITS_PER_CHUNK)
-
-struct bitmap_page {
- unsigned long chunks[BITMAP_PAGE_CHUNKS];
- struct bitmap_page *next;
-};
-
-extern void free_bitmap(struct bitmap_page *bitmap);
-extern struct bitmap_page *alloc_bitmap(unsigned int nr_bits);
-extern sector_t alloc_swapdev_block(int swap, struct bitmap_page *bitmap);
-extern void free_all_swap_pages(int swap, struct bitmap_page *bitmap);
+extern sector_t alloc_swapdev_block(int swap);
+extern void free_all_swap_pages(int swap);
+extern int swsusp_swap_in_use(void);
extern int swsusp_check(void);
extern int swsusp_shrink_memory(void);
diff --git a/kernel/power/process.c b/kernel/power/process.c
index 6d566bf..0eb5c42 100644
--- a/kernel/power/process.c
+++ b/kernel/power/process.c
@@ -47,8 +47,10 @@
recalc_sigpending(); /* We sent fake signal, clean it up */
spin_unlock_irq(¤t->sighand->siglock);
- while (frozen(current)) {
- current->state = TASK_UNINTERRUPTIBLE;
+ for (;;) {
+ set_current_state(TASK_UNINTERRUPTIBLE);
+ if (!frozen(current))
+ break;
schedule();
}
pr_debug("%s left refrigerator\n", current->comm);
diff --git a/kernel/power/snapshot.c b/kernel/power/snapshot.c
index 704c25a..128da11 100644
--- a/kernel/power/snapshot.c
+++ b/kernel/power/snapshot.c
@@ -21,6 +21,7 @@
#include <linux/kernel.h>
#include <linux/pm.h>
#include <linux/device.h>
+#include <linux/init.h>
#include <linux/bootmem.h>
#include <linux/syscalls.h>
#include <linux/console.h>
@@ -34,6 +35,10 @@
#include "power.h"
+static int swsusp_page_is_free(struct page *);
+static void swsusp_set_page_forbidden(struct page *);
+static void swsusp_unset_page_forbidden(struct page *);
+
/* List of PBEs needed for restoring the pages that were allocated before
* the suspend and included in the suspend image, but have also been
* allocated by the "resume" kernel, so their contents cannot be written
@@ -67,15 +72,15 @@
res = (void *)get_zeroed_page(gfp_mask);
if (safe_needed)
- while (res && PageNosaveFree(virt_to_page(res))) {
+ while (res && swsusp_page_is_free(virt_to_page(res))) {
/* The page is unsafe, mark it for swsusp_free() */
- SetPageNosave(virt_to_page(res));
+ swsusp_set_page_forbidden(virt_to_page(res));
allocated_unsafe_pages++;
res = (void *)get_zeroed_page(gfp_mask);
}
if (res) {
- SetPageNosave(virt_to_page(res));
- SetPageNosaveFree(virt_to_page(res));
+ swsusp_set_page_forbidden(virt_to_page(res));
+ swsusp_set_page_free(virt_to_page(res));
}
return res;
}
@@ -91,8 +96,8 @@
page = alloc_page(gfp_mask);
if (page) {
- SetPageNosave(page);
- SetPageNosaveFree(page);
+ swsusp_set_page_forbidden(page);
+ swsusp_set_page_free(page);
}
return page;
}
@@ -110,9 +115,9 @@
page = virt_to_page(addr);
- ClearPageNosave(page);
+ swsusp_unset_page_forbidden(page);
if (clear_nosave_free)
- ClearPageNosaveFree(page);
+ swsusp_unset_page_free(page);
__free_page(page);
}
@@ -224,11 +229,6 @@
* of type unsigned long each). It also contains the pfns that
* correspond to the start and end of the represented memory area and
* the number of bit chunks in the block.
- *
- * NOTE: Memory bitmaps are used for two types of operations only:
- * "set a bit" and "find the next bit set". Moreover, the searching
- * is always carried out after all of the "set a bit" operations
- * on given bitmap.
*/
#define BM_END_OF_MAP (~0UL)
@@ -443,15 +443,13 @@
}
/**
- * memory_bm_set_bit - set the bit in the bitmap @bm that corresponds
+ * memory_bm_find_bit - find the bit in the bitmap @bm that corresponds
* to given pfn. The cur_zone_bm member of @bm and the cur_block member
* of @bm->cur_zone_bm are updated.
- *
- * If the bit cannot be set, the function returns -EINVAL .
*/
-static int
-memory_bm_set_bit(struct memory_bitmap *bm, unsigned long pfn)
+static void memory_bm_find_bit(struct memory_bitmap *bm, unsigned long pfn,
+ void **addr, unsigned int *bit_nr)
{
struct zone_bitmap *zone_bm;
struct bm_block *bb;
@@ -463,8 +461,8 @@
/* We don't assume that the zones are sorted by pfns */
while (pfn < zone_bm->start_pfn || pfn >= zone_bm->end_pfn) {
zone_bm = zone_bm->next;
- if (unlikely(!zone_bm))
- return -EINVAL;
+
+ BUG_ON(!zone_bm);
}
bm->cur.zone_bm = zone_bm;
}
@@ -475,13 +473,40 @@
while (pfn >= bb->end_pfn) {
bb = bb->next;
- if (unlikely(!bb))
- return -EINVAL;
+
+ BUG_ON(!bb);
}
zone_bm->cur_block = bb;
pfn -= bb->start_pfn;
- set_bit(pfn % BM_BITS_PER_CHUNK, bb->data + pfn / BM_BITS_PER_CHUNK);
- return 0;
+ *bit_nr = pfn % BM_BITS_PER_CHUNK;
+ *addr = bb->data + pfn / BM_BITS_PER_CHUNK;
+}
+
+static void memory_bm_set_bit(struct memory_bitmap *bm, unsigned long pfn)
+{
+ void *addr;
+ unsigned int bit;
+
+ memory_bm_find_bit(bm, pfn, &addr, &bit);
+ set_bit(bit, addr);
+}
+
+static void memory_bm_clear_bit(struct memory_bitmap *bm, unsigned long pfn)
+{
+ void *addr;
+ unsigned int bit;
+
+ memory_bm_find_bit(bm, pfn, &addr, &bit);
+ clear_bit(bit, addr);
+}
+
+static int memory_bm_test_bit(struct memory_bitmap *bm, unsigned long pfn)
+{
+ void *addr;
+ unsigned int bit;
+
+ memory_bm_find_bit(bm, pfn, &addr, &bit);
+ return test_bit(bit, addr);
}
/* Two auxiliary functions for memory_bm_next_pfn */
@@ -564,6 +589,199 @@
}
/**
+ * This structure represents a range of page frames the contents of which
+ * should not be saved during the suspend.
+ */
+
+struct nosave_region {
+ struct list_head list;
+ unsigned long start_pfn;
+ unsigned long end_pfn;
+};
+
+static LIST_HEAD(nosave_regions);
+
+/**
+ * register_nosave_region - register a range of page frames the contents
+ * of which should not be saved during the suspend (to be used in the early
+ * initialization code)
+ */
+
+void __init
+register_nosave_region(unsigned long start_pfn, unsigned long end_pfn)
+{
+ struct nosave_region *region;
+
+ if (start_pfn >= end_pfn)
+ return;
+
+ if (!list_empty(&nosave_regions)) {
+ /* Try to extend the previous region (they should be sorted) */
+ region = list_entry(nosave_regions.prev,
+ struct nosave_region, list);
+ if (region->end_pfn == start_pfn) {
+ region->end_pfn = end_pfn;
+ goto Report;
+ }
+ }
+ /* This allocation cannot fail */
+ region = alloc_bootmem_low(sizeof(struct nosave_region));
+ region->start_pfn = start_pfn;
+ region->end_pfn = end_pfn;
+ list_add_tail(®ion->list, &nosave_regions);
+ Report:
+ printk("swsusp: Registered nosave memory region: %016lx - %016lx\n",
+ start_pfn << PAGE_SHIFT, end_pfn << PAGE_SHIFT);
+}
+
+/*
+ * Set bits in this map correspond to the page frames the contents of which
+ * should not be saved during the suspend.
+ */
+static struct memory_bitmap *forbidden_pages_map;
+
+/* Set bits in this map correspond to free page frames. */
+static struct memory_bitmap *free_pages_map;
+
+/*
+ * Each page frame allocated for creating the image is marked by setting the
+ * corresponding bits in forbidden_pages_map and free_pages_map simultaneously
+ */
+
+void swsusp_set_page_free(struct page *page)
+{
+ if (free_pages_map)
+ memory_bm_set_bit(free_pages_map, page_to_pfn(page));
+}
+
+static int swsusp_page_is_free(struct page *page)
+{
+ return free_pages_map ?
+ memory_bm_test_bit(free_pages_map, page_to_pfn(page)) : 0;
+}
+
+void swsusp_unset_page_free(struct page *page)
+{
+ if (free_pages_map)
+ memory_bm_clear_bit(free_pages_map, page_to_pfn(page));
+}
+
+static void swsusp_set_page_forbidden(struct page *page)
+{
+ if (forbidden_pages_map)
+ memory_bm_set_bit(forbidden_pages_map, page_to_pfn(page));
+}
+
+int swsusp_page_is_forbidden(struct page *page)
+{
+ return forbidden_pages_map ?
+ memory_bm_test_bit(forbidden_pages_map, page_to_pfn(page)) : 0;
+}
+
+static void swsusp_unset_page_forbidden(struct page *page)
+{
+ if (forbidden_pages_map)
+ memory_bm_clear_bit(forbidden_pages_map, page_to_pfn(page));
+}
+
+/**
+ * mark_nosave_pages - set bits corresponding to the page frames the
+ * contents of which should not be saved in a given bitmap.
+ */
+
+static void mark_nosave_pages(struct memory_bitmap *bm)
+{
+ struct nosave_region *region;
+
+ if (list_empty(&nosave_regions))
+ return;
+
+ list_for_each_entry(region, &nosave_regions, list) {
+ unsigned long pfn;
+
+ printk("swsusp: Marking nosave pages: %016lx - %016lx\n",
+ region->start_pfn << PAGE_SHIFT,
+ region->end_pfn << PAGE_SHIFT);
+
+ for (pfn = region->start_pfn; pfn < region->end_pfn; pfn++)
+ memory_bm_set_bit(bm, pfn);
+ }
+}
+
+/**
+ * create_basic_memory_bitmaps - create bitmaps needed for marking page
+ * frames that should not be saved and free page frames. The pointers
+ * forbidden_pages_map and free_pages_map are only modified if everything
+ * goes well, because we don't want the bits to be used before both bitmaps
+ * are set up.
+ */
+
+int create_basic_memory_bitmaps(void)
+{
+ struct memory_bitmap *bm1, *bm2;
+ int error = 0;
+
+ BUG_ON(forbidden_pages_map || free_pages_map);
+
+ bm1 = kzalloc(sizeof(struct memory_bitmap), GFP_KERNEL);
+ if (!bm1)
+ return -ENOMEM;
+
+ error = memory_bm_create(bm1, GFP_KERNEL, PG_ANY);
+ if (error)
+ goto Free_first_object;
+
+ bm2 = kzalloc(sizeof(struct memory_bitmap), GFP_KERNEL);
+ if (!bm2)
+ goto Free_first_bitmap;
+
+ error = memory_bm_create(bm2, GFP_KERNEL, PG_ANY);
+ if (error)
+ goto Free_second_object;
+
+ forbidden_pages_map = bm1;
+ free_pages_map = bm2;
+ mark_nosave_pages(forbidden_pages_map);
+
+ printk("swsusp: Basic memory bitmaps created\n");
+
+ return 0;
+
+ Free_second_object:
+ kfree(bm2);
+ Free_first_bitmap:
+ memory_bm_free(bm1, PG_UNSAFE_CLEAR);
+ Free_first_object:
+ kfree(bm1);
+ return -ENOMEM;
+}
+
+/**
+ * free_basic_memory_bitmaps - free memory bitmaps allocated by
+ * create_basic_memory_bitmaps(). The auxiliary pointers are necessary
+ * so that the bitmaps themselves are not referred to while they are being
+ * freed.
+ */
+
+void free_basic_memory_bitmaps(void)
+{
+ struct memory_bitmap *bm1, *bm2;
+
+ BUG_ON(!(forbidden_pages_map && free_pages_map));
+
+ bm1 = forbidden_pages_map;
+ bm2 = free_pages_map;
+ forbidden_pages_map = NULL;
+ free_pages_map = NULL;
+ memory_bm_free(bm1, PG_UNSAFE_CLEAR);
+ kfree(bm1);
+ memory_bm_free(bm2, PG_UNSAFE_CLEAR);
+ kfree(bm2);
+
+ printk("swsusp: Basic memory bitmaps freed\n");
+}
+
+/**
* snapshot_additional_pages - estimate the number of additional pages
* be needed for setting up the suspend image data structures for given
* zone (usually the returned value is greater than the exact number)
@@ -615,7 +833,8 @@
BUG_ON(!PageHighMem(page));
- if (PageNosave(page) || PageReserved(page) || PageNosaveFree(page))
+ if (swsusp_page_is_forbidden(page) || swsusp_page_is_free(page) ||
+ PageReserved(page))
return NULL;
return page;
@@ -670,7 +889,7 @@
BUG_ON(PageHighMem(page));
- if (PageNosave(page) || PageNosaveFree(page))
+ if (swsusp_page_is_forbidden(page) || swsusp_page_is_free(page))
return NULL;
if (PageReserved(page) && pfn_is_nosave(pfn))
@@ -810,9 +1029,10 @@
if (pfn_valid(pfn)) {
struct page *page = pfn_to_page(pfn);
- if (PageNosave(page) && PageNosaveFree(page)) {
- ClearPageNosave(page);
- ClearPageNosaveFree(page);
+ if (swsusp_page_is_forbidden(page) &&
+ swsusp_page_is_free(page)) {
+ swsusp_unset_page_forbidden(page);
+ swsusp_unset_page_free(page);
__free_page(page);
}
}
@@ -1135,7 +1355,7 @@
max_zone_pfn = zone->zone_start_pfn + zone->spanned_pages;
for (pfn = zone->zone_start_pfn; pfn < max_zone_pfn; pfn++)
if (pfn_valid(pfn))
- ClearPageNosaveFree(pfn_to_page(pfn));
+ swsusp_unset_page_free(pfn_to_page(pfn));
}
/* Mark pages that correspond to the "original" pfns as "unsafe" */
@@ -1144,7 +1364,7 @@
pfn = memory_bm_next_pfn(bm);
if (likely(pfn != BM_END_OF_MAP)) {
if (likely(pfn_valid(pfn)))
- SetPageNosaveFree(pfn_to_page(pfn));
+ swsusp_set_page_free(pfn_to_page(pfn));
else
return -EFAULT;
}
@@ -1310,14 +1530,14 @@
struct page *page;
page = alloc_page(__GFP_HIGHMEM);
- if (!PageNosaveFree(page)) {
+ if (!swsusp_page_is_free(page)) {
/* The page is "safe", set its bit the bitmap */
memory_bm_set_bit(bm, page_to_pfn(page));
safe_highmem_pages++;
}
/* Mark the page as allocated */
- SetPageNosave(page);
- SetPageNosaveFree(page);
+ swsusp_set_page_forbidden(page);
+ swsusp_set_page_free(page);
}
memory_bm_position_reset(bm);
safe_highmem_bm = bm;
@@ -1349,7 +1569,7 @@
struct highmem_pbe *pbe;
void *kaddr;
- if (PageNosave(page) && PageNosaveFree(page)) {
+ if (swsusp_page_is_forbidden(page) && swsusp_page_is_free(page)) {
/* We have allocated the "original" page frame and we can
* use it directly to store the loaded page.
*/
@@ -1511,14 +1731,14 @@
error = -ENOMEM;
goto Free;
}
- if (!PageNosaveFree(virt_to_page(lp))) {
+ if (!swsusp_page_is_free(virt_to_page(lp))) {
/* The page is "safe", add it to the list */
lp->next = safe_pages_list;
safe_pages_list = lp;
}
/* Mark the page as allocated */
- SetPageNosave(virt_to_page(lp));
- SetPageNosaveFree(virt_to_page(lp));
+ swsusp_set_page_forbidden(virt_to_page(lp));
+ swsusp_set_page_free(virt_to_page(lp));
nr_pages--;
}
/* Free the reserved safe pages so that chain_alloc() can use them */
@@ -1547,7 +1767,7 @@
if (PageHighMem(page))
return get_highmem_page_buffer(page, ca);
- if (PageNosave(page) && PageNosaveFree(page))
+ if (swsusp_page_is_forbidden(page) && swsusp_page_is_free(page))
/* We have allocated the "original" page frame and we can
* use it directly to store the loaded page.
*/
diff --git a/kernel/power/swap.c b/kernel/power/swap.c
index b18c155..e83ed99 100644
--- a/kernel/power/swap.c
+++ b/kernel/power/swap.c
@@ -243,7 +243,6 @@
struct swap_map_handle {
struct swap_map_page *cur;
sector_t cur_swap;
- struct bitmap_page *bitmap;
unsigned int k;
};
@@ -252,9 +251,6 @@
if (handle->cur)
free_page((unsigned long)handle->cur);
handle->cur = NULL;
- if (handle->bitmap)
- free_bitmap(handle->bitmap);
- handle->bitmap = NULL;
}
static int get_swap_writer(struct swap_map_handle *handle)
@@ -262,12 +258,7 @@
handle->cur = (struct swap_map_page *)get_zeroed_page(GFP_KERNEL);
if (!handle->cur)
return -ENOMEM;
- handle->bitmap = alloc_bitmap(count_swap_pages(root_swap, 0));
- if (!handle->bitmap) {
- release_swap_writer(handle);
- return -ENOMEM;
- }
- handle->cur_swap = alloc_swapdev_block(root_swap, handle->bitmap);
+ handle->cur_swap = alloc_swapdev_block(root_swap);
if (!handle->cur_swap) {
release_swap_writer(handle);
return -ENOSPC;
@@ -284,7 +275,7 @@
if (!handle->cur)
return -EINVAL;
- offset = alloc_swapdev_block(root_swap, handle->bitmap);
+ offset = alloc_swapdev_block(root_swap);
error = write_page(buf, offset, bio_chain);
if (error)
return error;
@@ -293,7 +284,7 @@
error = wait_on_bio_chain(bio_chain);
if (error)
goto out;
- offset = alloc_swapdev_block(root_swap, handle->bitmap);
+ offset = alloc_swapdev_block(root_swap);
if (!offset)
return -ENOSPC;
handle->cur->next_swap = offset;
@@ -430,7 +421,8 @@
}
}
if (error)
- free_all_swap_pages(root_swap, handle.bitmap);
+ free_all_swap_pages(root_swap);
+
release_swap_writer(&handle);
out:
swsusp_close();
diff --git a/kernel/power/swsusp.c b/kernel/power/swsusp.c
index 1753708..5da304c 100644
--- a/kernel/power/swsusp.c
+++ b/kernel/power/swsusp.c
@@ -50,6 +50,7 @@
#include <linux/syscalls.h>
#include <linux/highmem.h>
#include <linux/time.h>
+#include <linux/rbtree.h>
#include "power.h"
@@ -74,72 +75,69 @@
/**
* The following functions are used for tracing the allocated
* swap pages, so that they can be freed in case of an error.
- *
- * The functions operate on a linked bitmap structure defined
- * in power.h
*/
-void free_bitmap(struct bitmap_page *bitmap)
+struct swsusp_extent {
+ struct rb_node node;
+ unsigned long start;
+ unsigned long end;
+};
+
+static struct rb_root swsusp_extents = RB_ROOT;
+
+static int swsusp_extents_insert(unsigned long swap_offset)
{
- struct bitmap_page *bp;
+ struct rb_node **new = &(swsusp_extents.rb_node);
+ struct rb_node *parent = NULL;
+ struct swsusp_extent *ext;
- while (bitmap) {
- bp = bitmap->next;
- free_page((unsigned long)bitmap);
- bitmap = bp;
- }
-}
-
-struct bitmap_page *alloc_bitmap(unsigned int nr_bits)
-{
- struct bitmap_page *bitmap, *bp;
- unsigned int n;
-
- if (!nr_bits)
- return NULL;
-
- bitmap = (struct bitmap_page *)get_zeroed_page(GFP_KERNEL);
- bp = bitmap;
- for (n = BITMAP_PAGE_BITS; n < nr_bits; n += BITMAP_PAGE_BITS) {
- bp->next = (struct bitmap_page *)get_zeroed_page(GFP_KERNEL);
- bp = bp->next;
- if (!bp) {
- free_bitmap(bitmap);
- return NULL;
+ /* Figure out where to put the new node */
+ while (*new) {
+ ext = container_of(*new, struct swsusp_extent, node);
+ parent = *new;
+ if (swap_offset < ext->start) {
+ /* Try to merge */
+ if (swap_offset == ext->start - 1) {
+ ext->start--;
+ return 0;
+ }
+ new = &((*new)->rb_left);
+ } else if (swap_offset > ext->end) {
+ /* Try to merge */
+ if (swap_offset == ext->end + 1) {
+ ext->end++;
+ return 0;
+ }
+ new = &((*new)->rb_right);
+ } else {
+ /* It already is in the tree */
+ return -EINVAL;
}
}
- return bitmap;
-}
+ /* Add the new node and rebalance the tree. */
+ ext = kzalloc(sizeof(struct swsusp_extent), GFP_KERNEL);
+ if (!ext)
+ return -ENOMEM;
-static int bitmap_set(struct bitmap_page *bitmap, unsigned long bit)
-{
- unsigned int n;
-
- n = BITMAP_PAGE_BITS;
- while (bitmap && n <= bit) {
- n += BITMAP_PAGE_BITS;
- bitmap = bitmap->next;
- }
- if (!bitmap)
- return -EINVAL;
- n -= BITMAP_PAGE_BITS;
- bit -= n;
- n = 0;
- while (bit >= BITS_PER_CHUNK) {
- bit -= BITS_PER_CHUNK;
- n++;
- }
- bitmap->chunks[n] |= (1UL << bit);
+ ext->start = swap_offset;
+ ext->end = swap_offset;
+ rb_link_node(&ext->node, parent, new);
+ rb_insert_color(&ext->node, &swsusp_extents);
return 0;
}
-sector_t alloc_swapdev_block(int swap, struct bitmap_page *bitmap)
+/**
+ * alloc_swapdev_block - allocate a swap page and register that it has
+ * been allocated, so that it can be freed in case of an error.
+ */
+
+sector_t alloc_swapdev_block(int swap)
{
unsigned long offset;
offset = swp_offset(get_swap_page_of_type(swap));
if (offset) {
- if (bitmap_set(bitmap, offset))
+ if (swsusp_extents_insert(offset))
swap_free(swp_entry(swap, offset));
else
return swapdev_block(swap, offset);
@@ -147,23 +145,34 @@
return 0;
}
-void free_all_swap_pages(int swap, struct bitmap_page *bitmap)
-{
- unsigned int bit, n;
- unsigned long test;
+/**
+ * free_all_swap_pages - free swap pages allocated for saving image data.
+ * It also frees the extents used to register which swap entres had been
+ * allocated.
+ */
- bit = 0;
- while (bitmap) {
- for (n = 0; n < BITMAP_PAGE_CHUNKS; n++)
- for (test = 1UL; test; test <<= 1) {
- if (bitmap->chunks[n] & test)
- swap_free(swp_entry(swap, bit));
- bit++;
- }
- bitmap = bitmap->next;
+void free_all_swap_pages(int swap)
+{
+ struct rb_node *node;
+
+ while ((node = swsusp_extents.rb_node)) {
+ struct swsusp_extent *ext;
+ unsigned long offset;
+
+ ext = container_of(node, struct swsusp_extent, node);
+ rb_erase(node, &swsusp_extents);
+ for (offset = ext->start; offset <= ext->end; offset++)
+ swap_free(swp_entry(swap, offset));
+
+ kfree(ext);
}
}
+int swsusp_swap_in_use(void)
+{
+ return (swsusp_extents.rb_node != NULL);
+}
+
/**
* swsusp_show_speed - print the time elapsed between two events represented by
* @start and @stop
@@ -224,7 +233,7 @@
long size, highmem_size;
highmem_size = count_highmem_pages();
- size = count_data_pages() + PAGES_FOR_IO;
+ size = count_data_pages() + PAGES_FOR_IO + SPARE_PAGES;
tmp = size;
size += highmem_size;
for_each_zone (zone)
diff --git a/kernel/power/user.c b/kernel/power/user.c
index 7cf6713..040560d 100644
--- a/kernel/power/user.c
+++ b/kernel/power/user.c
@@ -33,25 +33,29 @@
static struct snapshot_data {
struct snapshot_handle handle;
int swap;
- struct bitmap_page *bitmap;
int mode;
char frozen;
char ready;
char platform_suspend;
} snapshot_state;
-static atomic_t device_available = ATOMIC_INIT(1);
+atomic_t snapshot_device_available = ATOMIC_INIT(1);
static int snapshot_open(struct inode *inode, struct file *filp)
{
struct snapshot_data *data;
- if (!atomic_add_unless(&device_available, -1, 0))
+ if (!atomic_add_unless(&snapshot_device_available, -1, 0))
return -EBUSY;
- if ((filp->f_flags & O_ACCMODE) == O_RDWR)
+ if ((filp->f_flags & O_ACCMODE) == O_RDWR) {
+ atomic_inc(&snapshot_device_available);
return -ENOSYS;
-
+ }
+ if(create_basic_memory_bitmaps()) {
+ atomic_inc(&snapshot_device_available);
+ return -ENOMEM;
+ }
nonseekable_open(inode, filp);
data = &snapshot_state;
filp->private_data = data;
@@ -64,7 +68,6 @@
data->swap = -1;
data->mode = O_WRONLY;
}
- data->bitmap = NULL;
data->frozen = 0;
data->ready = 0;
data->platform_suspend = 0;
@@ -77,16 +80,15 @@
struct snapshot_data *data;
swsusp_free();
+ free_basic_memory_bitmaps();
data = filp->private_data;
- free_all_swap_pages(data->swap, data->bitmap);
- free_bitmap(data->bitmap);
+ free_all_swap_pages(data->swap);
if (data->frozen) {
mutex_lock(&pm_mutex);
thaw_processes();
- enable_nonboot_cpus();
mutex_unlock(&pm_mutex);
}
- atomic_inc(&device_available);
+ atomic_inc(&snapshot_device_available);
return 0;
}
@@ -294,14 +296,7 @@
error = -ENODEV;
break;
}
- if (!data->bitmap) {
- data->bitmap = alloc_bitmap(count_swap_pages(data->swap, 0));
- if (!data->bitmap) {
- error = -ENOMEM;
- break;
- }
- }
- offset = alloc_swapdev_block(data->swap, data->bitmap);
+ offset = alloc_swapdev_block(data->swap);
if (offset) {
offset <<= PAGE_SHIFT;
error = put_user(offset, (sector_t __user *)arg);
@@ -315,13 +310,11 @@
error = -ENODEV;
break;
}
- free_all_swap_pages(data->swap, data->bitmap);
- free_bitmap(data->bitmap);
- data->bitmap = NULL;
+ free_all_swap_pages(data->swap);
break;
case SNAPSHOT_SET_SWAP_FILE:
- if (!data->bitmap) {
+ if (!swsusp_swap_in_use()) {
/*
* User space encodes device types as two-byte values,
* so we need to recode them
@@ -420,7 +413,7 @@
break;
case SNAPSHOT_SET_SWAP_AREA:
- if (data->bitmap) {
+ if (swsusp_swap_in_use()) {
error = -EPERM;
} else {
struct resume_swap_area swap_area;
diff --git a/kernel/sched.c b/kernel/sched.c
index 960d7c5..0227f16 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -5244,6 +5244,11 @@
#endif
#ifdef CONFIG_SMP
+
+/* Number of possible processor ids */
+int nr_cpu_ids __read_mostly = NR_CPUS;
+EXPORT_SYMBOL(nr_cpu_ids);
+
#undef SCHED_DOMAIN_DEBUG
#ifdef SCHED_DOMAIN_DEBUG
static void sched_domain_debug(struct sched_domain *sd, int cpu)
@@ -6726,6 +6731,7 @@
void __init sched_init(void)
{
int i, j, k;
+ int highest_cpu = 0;
for_each_possible_cpu(i) {
struct prio_array *array;
@@ -6760,11 +6766,13 @@
// delimiter for bitsearch
__set_bit(MAX_PRIO, array->bitmap);
}
+ highest_cpu = i;
}
set_load_weight(&init_task);
#ifdef CONFIG_SMP
+ nr_cpu_ids = highest_cpu + 1;
open_softirq(SCHED_SOFTIRQ, run_rebalance_domains, NULL);
#endif
diff --git a/kernel/signal.c b/kernel/signal.c
index 3670225..2b4087d 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -2636,9 +2636,5 @@
void __init signals_init(void)
{
- sigqueue_cachep =
- kmem_cache_create("sigqueue",
- sizeof(struct sigqueue),
- __alignof__(struct sigqueue),
- SLAB_PANIC, NULL, NULL);
+ sigqueue_cachep = KMEM_CACHE(sigqueue, SLAB_PANIC);
}
diff --git a/kernel/sys.c b/kernel/sys.c
index 123b165..fe1f3ab 100644
--- a/kernel/sys.c
+++ b/kernel/sys.c
@@ -881,7 +881,7 @@
#ifdef CONFIG_SOFTWARE_SUSPEND
case LINUX_REBOOT_CMD_SW_SUSPEND:
{
- int ret = software_suspend();
+ int ret = pm_suspend(PM_SUSPEND_DISK);
unlock_kernel();
return ret;
}
diff --git a/kernel/taskstats.c b/kernel/taskstats.c
index ad7d239..906cae7 100644
--- a/kernel/taskstats.c
+++ b/kernel/taskstats.c
@@ -524,9 +524,7 @@
{
unsigned int i;
- taskstats_cache = kmem_cache_create("taskstats_cache",
- sizeof(struct taskstats),
- 0, SLAB_PANIC, NULL, NULL);
+ taskstats_cache = KMEM_CACHE(taskstats, SLAB_PANIC);
for_each_possible_cpu(i) {
INIT_LIST_HEAD(&(per_cpu(listener_array, i).list));
init_rwsem(&(per_cpu(listener_array, i).sem));
diff --git a/lib/Kconfig b/lib/Kconfig
index 3842499..96d6e8c 100644
--- a/lib/Kconfig
+++ b/lib/Kconfig
@@ -111,4 +111,9 @@
depends on HAS_IOMEM && !NO_IOPORT
default y
+config HAS_DMA
+ boolean
+ depends on !NO_DMA
+ default y
+
endmenu
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index bdbf3fe..9a28779 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -320,7 +320,7 @@
config DEBUG_BUGVERBOSE
bool "Verbose BUG() reporting (adds 70K)" if DEBUG_KERNEL && EMBEDDED
depends on BUG
- depends on ARM || ARM26 || AVR32 || M32R || M68K || SPARC32 || SPARC64 || FRV || SUPERH || GENERIC_BUG
+ depends on ARM || ARM26 || AVR32 || M32R || M68K || SPARC32 || SPARC64 || FRV || SUPERH || GENERIC_BUG || BFIN
default !EMBEDDED
help
Say Y here to make BUG() panics output the file name and line number
@@ -360,7 +360,7 @@
config FRAME_POINTER
bool "Compile the kernel with frame pointers"
- depends on DEBUG_KERNEL && (X86 || CRIS || M68K || M68KNOMMU || FRV || UML || S390 || AVR32 || SUPERH)
+ depends on DEBUG_KERNEL && (X86 || CRIS || M68K || M68KNOMMU || FRV || UML || S390 || AVR32 || SUPERH || BFIN)
default y if DEBUG_INFO && UML
help
If you say Y here the resulting kernel image will be slightly larger
diff --git a/lib/cpumask.c b/lib/cpumask.c
index 1ea2c18..bb4f76d 100644
--- a/lib/cpumask.c
+++ b/lib/cpumask.c
@@ -15,9 +15,6 @@
}
EXPORT_SYMBOL(__next_cpu);
-int nr_cpu_ids;
-EXPORT_SYMBOL(nr_cpu_ids);
-
int __any_online_cpu(const cpumask_t *mask)
{
int cpu;
diff --git a/lib/zlib_inflate/inflate.c b/lib/zlib_inflate/inflate.c
index fceb97c..7e1e311 100644
--- a/lib/zlib_inflate/inflate.c
+++ b/lib/zlib_inflate/inflate.c
@@ -743,12 +743,14 @@
strm->data_type = state->bits + (state->last ? 64 : 0) +
(state->mode == TYPE ? 128 : 0);
+
+ if (flush == Z_PACKET_FLUSH && ret == Z_OK &&
+ strm->avail_out != 0 && strm->avail_in == 0)
+ return zlib_inflateSyncPacket(strm);
+
if (((in == 0 && out == 0) || flush == Z_FINISH) && ret == Z_OK)
ret = Z_BUF_ERROR;
- if (flush == Z_PACKET_FLUSH && ret == Z_OK &&
- (strm->avail_out != 0 || strm->avail_in == 0))
- return zlib_inflateSyncPacket(strm);
return ret;
}
diff --git a/mm/Kconfig b/mm/Kconfig
index 7942b33..1ac718f 100644
--- a/mm/Kconfig
+++ b/mm/Kconfig
@@ -163,3 +163,8 @@
default "0" if !ZONE_DMA
default "1"
+config NR_QUICK
+ int
+ depends on QUICKLIST
+ default "1"
+
diff --git a/mm/Makefile b/mm/Makefile
index f3c077e..a9148ea 100644
--- a/mm/Makefile
+++ b/mm/Makefile
@@ -25,7 +25,10 @@
obj-$(CONFIG_TINY_SHMEM) += tiny-shmem.o
obj-$(CONFIG_SLOB) += slob.o
obj-$(CONFIG_SLAB) += slab.o
+obj-$(CONFIG_SLUB) += slub.o
obj-$(CONFIG_MEMORY_HOTPLUG) += memory_hotplug.o
obj-$(CONFIG_FS_XIP) += filemap_xip.o
obj-$(CONFIG_MIGRATION) += migrate.o
obj-$(CONFIG_SMP) += allocpercpu.o
+obj-$(CONFIG_QUICKLIST) += quicklist.o
+
diff --git a/mm/filemap.c b/mm/filemap.c
index 5dfc093..5631d6b 100644
--- a/mm/filemap.c
+++ b/mm/filemap.c
@@ -868,6 +868,7 @@
unsigned long last_index;
unsigned long next_index;
unsigned long prev_index;
+ unsigned int prev_offset;
loff_t isize;
struct page *cached_page;
int error;
@@ -876,7 +877,8 @@
cached_page = NULL;
index = *ppos >> PAGE_CACHE_SHIFT;
next_index = index;
- prev_index = ra.prev_page;
+ prev_index = ra.prev_index;
+ prev_offset = ra.prev_offset;
last_index = (*ppos + desc->count + PAGE_CACHE_SIZE-1) >> PAGE_CACHE_SHIFT;
offset = *ppos & ~PAGE_CACHE_MASK;
@@ -924,10 +926,10 @@
flush_dcache_page(page);
/*
- * When (part of) the same page is read multiple times
- * in succession, only mark it as accessed the first time.
+ * When a sequential read accesses a page several times,
+ * only mark it as accessed the first time.
*/
- if (prev_index != index)
+ if (prev_index != index || offset != prev_offset)
mark_page_accessed(page);
prev_index = index;
@@ -945,6 +947,8 @@
offset += ret;
index += offset >> PAGE_CACHE_SHIFT;
offset &= ~PAGE_CACHE_MASK;
+ prev_offset = offset;
+ ra.prev_offset = offset;
page_cache_release(page);
if (ret == nr && desc->count)
@@ -1446,30 +1450,6 @@
majmin = VM_FAULT_MAJOR;
count_vm_event(PGMAJFAULT);
}
- lock_page(page);
-
- /* Did it get unhashed while we waited for it? */
- if (!page->mapping) {
- unlock_page(page);
- page_cache_release(page);
- goto retry_all;
- }
-
- /* Did somebody else get it up-to-date? */
- if (PageUptodate(page)) {
- unlock_page(page);
- goto success;
- }
-
- error = mapping->a_ops->readpage(file, page);
- if (!error) {
- wait_on_page_locked(page);
- if (PageUptodate(page))
- goto success;
- } else if (error == AOP_TRUNCATED_PAGE) {
- page_cache_release(page);
- goto retry_find;
- }
/*
* Umm, take care of errors if the page isn't up-to-date.
@@ -1726,7 +1706,7 @@
EXPORT_SYMBOL(generic_file_mmap);
EXPORT_SYMBOL(generic_file_readonly_mmap);
-static inline struct page *__read_cache_page(struct address_space *mapping,
+static struct page *__read_cache_page(struct address_space *mapping,
unsigned long index,
int (*filler)(void *,struct page*),
void *data)
@@ -1763,17 +1743,11 @@
return page;
}
-/**
- * read_cache_page - read into page cache, fill it if needed
- * @mapping: the page's address_space
- * @index: the page index
- * @filler: function to perform the read
- * @data: destination for read data
- *
- * Read into the page cache. If a page already exists,
- * and PageUptodate() is not set, try to fill the page.
+/*
+ * Same as read_cache_page, but don't wait for page to become unlocked
+ * after submitting it to the filler.
*/
-struct page *read_cache_page(struct address_space *mapping,
+struct page *read_cache_page_async(struct address_space *mapping,
unsigned long index,
int (*filler)(void *,struct page*),
void *data)
@@ -1805,6 +1779,39 @@
page = ERR_PTR(err);
}
out:
+ mark_page_accessed(page);
+ return page;
+}
+EXPORT_SYMBOL(read_cache_page_async);
+
+/**
+ * read_cache_page - read into page cache, fill it if needed
+ * @mapping: the page's address_space
+ * @index: the page index
+ * @filler: function to perform the read
+ * @data: destination for read data
+ *
+ * Read into the page cache. If a page already exists, and PageUptodate() is
+ * not set, try to fill the page then wait for it to become unlocked.
+ *
+ * If the page does not get brought uptodate, return -EIO.
+ */
+struct page *read_cache_page(struct address_space *mapping,
+ unsigned long index,
+ int (*filler)(void *,struct page*),
+ void *data)
+{
+ struct page *page;
+
+ page = read_cache_page_async(mapping, index, filler, data);
+ if (IS_ERR(page))
+ goto out;
+ wait_on_page_locked(page);
+ if (!PageUptodate(page)) {
+ page_cache_release(page);
+ page = ERR_PTR(-EIO);
+ }
+ out:
return page;
}
EXPORT_SYMBOL(read_cache_page);
diff --git a/mm/internal.h b/mm/internal.h
index d527b80..a3110c0 100644
--- a/mm/internal.h
+++ b/mm/internal.h
@@ -24,7 +24,7 @@
*/
static inline void set_page_refcounted(struct page *page)
{
- VM_BUG_ON(PageCompound(page) && page_private(page) != (unsigned long)page);
+ VM_BUG_ON(PageCompound(page) && PageTail(page));
VM_BUG_ON(atomic_read(&page->_count));
set_page_count(page, 1);
}
diff --git a/mm/madvise.c b/mm/madvise.c
index 603c525..e75096b 100644
--- a/mm/madvise.c
+++ b/mm/madvise.c
@@ -12,6 +12,24 @@
#include <linux/hugetlb.h>
/*
+ * Any behaviour which results in changes to the vma->vm_flags needs to
+ * take mmap_sem for writing. Others, which simply traverse vmas, need
+ * to only take it for reading.
+ */
+static int madvise_need_mmap_write(int behavior)
+{
+ switch (behavior) {
+ case MADV_REMOVE:
+ case MADV_WILLNEED:
+ case MADV_DONTNEED:
+ return 0;
+ default:
+ /* be safe, default to 1. list exceptions explicitly */
+ return 1;
+ }
+}
+
+/*
* We can potentially split a vm area into separate
* areas, each area with its own behavior.
*/
@@ -183,9 +201,9 @@
+ ((loff_t)vma->vm_pgoff << PAGE_SHIFT);
/* vmtruncate_range needs to take i_mutex and i_alloc_sem */
- up_write(¤t->mm->mmap_sem);
+ up_read(¤t->mm->mmap_sem);
error = vmtruncate_range(mapping->host, offset, endoff);
- down_write(¤t->mm->mmap_sem);
+ down_read(¤t->mm->mmap_sem);
return error;
}
@@ -270,7 +288,10 @@
int error = -EINVAL;
size_t len;
- down_write(¤t->mm->mmap_sem);
+ if (madvise_need_mmap_write(behavior))
+ down_write(¤t->mm->mmap_sem);
+ else
+ down_read(¤t->mm->mmap_sem);
if (start & ~PAGE_MASK)
goto out;
@@ -332,6 +353,10 @@
vma = find_vma(current->mm, start);
}
out:
- up_write(¤t->mm->mmap_sem);
+ if (madvise_need_mmap_write(behavior))
+ up_write(¤t->mm->mmap_sem);
+ else
+ up_read(¤t->mm->mmap_sem);
+
return error;
}
diff --git a/mm/memory.c b/mm/memory.c
index e7066e7..1d647ab 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -1448,6 +1448,100 @@
}
EXPORT_SYMBOL(remap_pfn_range);
+static int apply_to_pte_range(struct mm_struct *mm, pmd_t *pmd,
+ unsigned long addr, unsigned long end,
+ pte_fn_t fn, void *data)
+{
+ pte_t *pte;
+ int err;
+ struct page *pmd_page;
+ spinlock_t *uninitialized_var(ptl);
+
+ pte = (mm == &init_mm) ?
+ pte_alloc_kernel(pmd, addr) :
+ pte_alloc_map_lock(mm, pmd, addr, &ptl);
+ if (!pte)
+ return -ENOMEM;
+
+ BUG_ON(pmd_huge(*pmd));
+
+ pmd_page = pmd_page(*pmd);
+
+ do {
+ err = fn(pte, pmd_page, addr, data);
+ if (err)
+ break;
+ } while (pte++, addr += PAGE_SIZE, addr != end);
+
+ if (mm != &init_mm)
+ pte_unmap_unlock(pte-1, ptl);
+ return err;
+}
+
+static int apply_to_pmd_range(struct mm_struct *mm, pud_t *pud,
+ unsigned long addr, unsigned long end,
+ pte_fn_t fn, void *data)
+{
+ pmd_t *pmd;
+ unsigned long next;
+ int err;
+
+ pmd = pmd_alloc(mm, pud, addr);
+ if (!pmd)
+ return -ENOMEM;
+ do {
+ next = pmd_addr_end(addr, end);
+ err = apply_to_pte_range(mm, pmd, addr, next, fn, data);
+ if (err)
+ break;
+ } while (pmd++, addr = next, addr != end);
+ return err;
+}
+
+static int apply_to_pud_range(struct mm_struct *mm, pgd_t *pgd,
+ unsigned long addr, unsigned long end,
+ pte_fn_t fn, void *data)
+{
+ pud_t *pud;
+ unsigned long next;
+ int err;
+
+ pud = pud_alloc(mm, pgd, addr);
+ if (!pud)
+ return -ENOMEM;
+ do {
+ next = pud_addr_end(addr, end);
+ err = apply_to_pmd_range(mm, pud, addr, next, fn, data);
+ if (err)
+ break;
+ } while (pud++, addr = next, addr != end);
+ return err;
+}
+
+/*
+ * Scan a region of virtual memory, filling in page tables as necessary
+ * and calling a provided function on each leaf page table.
+ */
+int apply_to_page_range(struct mm_struct *mm, unsigned long addr,
+ unsigned long size, pte_fn_t fn, void *data)
+{
+ pgd_t *pgd;
+ unsigned long next;
+ unsigned long end = addr + size;
+ int err;
+
+ BUG_ON(addr >= end);
+ pgd = pgd_offset(mm, addr);
+ do {
+ next = pgd_addr_end(addr, end);
+ err = apply_to_pud_range(mm, pgd, addr, next, fn, data);
+ if (err)
+ break;
+ } while (pgd++, addr = next, addr != end);
+ return err;
+}
+EXPORT_SYMBOL_GPL(apply_to_page_range);
+
/*
* handle_pte_fault chooses page fault handler according to an entry
* which was read non-atomically. Before making any commitment, on
@@ -2539,12 +2633,6 @@
spin_unlock(&mm->page_table_lock);
return 0;
}
-#else
-/* Workaround for gcc 2.96 */
-int __pud_alloc(struct mm_struct *mm, pgd_t *pgd, unsigned long address)
-{
- return 0;
-}
#endif /* __PAGETABLE_PUD_FOLDED */
#ifndef __PAGETABLE_PMD_FOLDED
@@ -2573,12 +2661,6 @@
spin_unlock(&mm->page_table_lock);
return 0;
}
-#else
-/* Workaround for gcc 2.96 */
-int __pmd_alloc(struct mm_struct *mm, pud_t *pud, unsigned long address)
-{
- return 0;
-}
#endif /* __PAGETABLE_PMD_FOLDED */
int make_pages_present(unsigned long addr, unsigned long end)
diff --git a/mm/mmap.c b/mm/mmap.c
index 88da687..52646d6 100644
--- a/mm/mmap.c
+++ b/mm/mmap.c
@@ -1200,6 +1200,9 @@
if (len > TASK_SIZE)
return -ENOMEM;
+ if (flags & MAP_FIXED)
+ return addr;
+
if (addr) {
addr = PAGE_ALIGN(addr);
vma = find_vma(mm, addr);
@@ -1273,6 +1276,9 @@
if (len > TASK_SIZE)
return -ENOMEM;
+ if (flags & MAP_FIXED)
+ return addr;
+
/* requesting a specific address */
if (addr) {
addr = PAGE_ALIGN(addr);
@@ -1361,38 +1367,21 @@
unsigned long pgoff, unsigned long flags)
{
unsigned long ret;
+ unsigned long (*get_area)(struct file *, unsigned long,
+ unsigned long, unsigned long, unsigned long);
- if (!(flags & MAP_FIXED)) {
- unsigned long (*get_area)(struct file *, unsigned long, unsigned long, unsigned long, unsigned long);
-
- get_area = current->mm->get_unmapped_area;
- if (file && file->f_op && file->f_op->get_unmapped_area)
- get_area = file->f_op->get_unmapped_area;
- addr = get_area(file, addr, len, pgoff, flags);
- if (IS_ERR_VALUE(addr))
- return addr;
- }
+ get_area = current->mm->get_unmapped_area;
+ if (file && file->f_op && file->f_op->get_unmapped_area)
+ get_area = file->f_op->get_unmapped_area;
+ addr = get_area(file, addr, len, pgoff, flags);
+ if (IS_ERR_VALUE(addr))
+ return addr;
if (addr > TASK_SIZE - len)
return -ENOMEM;
if (addr & ~PAGE_MASK)
return -EINVAL;
- if (file && is_file_hugepages(file)) {
- /*
- * Check if the given range is hugepage aligned, and
- * can be made suitable for hugepages.
- */
- ret = prepare_hugepage_range(addr, len, pgoff);
- } else {
- /*
- * Ensure that a normal request is not falling in a
- * reserved hugepage range. For some archs like IA-64,
- * there is a separate region for hugepages.
- */
- ret = is_hugepage_only_range(current->mm, addr, len);
- }
- if (ret)
- return -EINVAL;
+
return addr;
}
diff --git a/mm/oom_kill.c b/mm/oom_kill.c
index 3791edf..a700141 100644
--- a/mm/oom_kill.c
+++ b/mm/oom_kill.c
@@ -147,9 +147,11 @@
* Adjust the score by oomkilladj.
*/
if (p->oomkilladj) {
- if (p->oomkilladj > 0)
+ if (p->oomkilladj > 0) {
+ if (!points)
+ points = 1;
points <<= p->oomkilladj;
- else
+ } else
points >>= -(p->oomkilladj);
}
@@ -397,6 +399,7 @@
struct task_struct *p;
unsigned long points = 0;
unsigned long freed = 0;
+ int constraint;
blocking_notifier_call_chain(&oom_notify_list, 0, &freed);
if (freed > 0)
@@ -411,14 +414,18 @@
show_mem();
}
- cpuset_lock();
- read_lock(&tasklist_lock);
+ if (sysctl_panic_on_oom == 2)
+ panic("out of memory. Compulsory panic_on_oom is selected.\n");
/*
* Check if there were limitations on the allocation (only relevant for
* NUMA) that may require different handling.
*/
- switch (constrained_alloc(zonelist, gfp_mask)) {
+ constraint = constrained_alloc(zonelist, gfp_mask);
+ cpuset_lock();
+ read_lock(&tasklist_lock);
+
+ switch (constraint) {
case CONSTRAINT_MEMORY_POLICY:
oom_kill_process(current, points,
"No available memory (MPOL_BIND)");
diff --git a/mm/page-writeback.c b/mm/page-writeback.c
index a794945..029dfad 100644
--- a/mm/page-writeback.c
+++ b/mm/page-writeback.c
@@ -119,6 +119,44 @@
* We make sure that the background writeout level is below the adjusted
* clamping level.
*/
+
+static unsigned long highmem_dirtyable_memory(unsigned long total)
+{
+#ifdef CONFIG_HIGHMEM
+ int node;
+ unsigned long x = 0;
+
+ for_each_online_node(node) {
+ struct zone *z =
+ &NODE_DATA(node)->node_zones[ZONE_HIGHMEM];
+
+ x += zone_page_state(z, NR_FREE_PAGES)
+ + zone_page_state(z, NR_INACTIVE)
+ + zone_page_state(z, NR_ACTIVE);
+ }
+ /*
+ * Make sure that the number of highmem pages is never larger
+ * than the number of the total dirtyable memory. This can only
+ * occur in very strange VM situations but we want to make sure
+ * that this does not occur.
+ */
+ return min(x, total);
+#else
+ return 0;
+#endif
+}
+
+static unsigned long determine_dirtyable_memory(void)
+{
+ unsigned long x;
+
+ x = global_page_state(NR_FREE_PAGES)
+ + global_page_state(NR_INACTIVE)
+ + global_page_state(NR_ACTIVE);
+ x -= highmem_dirtyable_memory(x);
+ return x + 1; /* Ensure that we never return 0 */
+}
+
static void
get_dirty_limits(long *pbackground, long *pdirty,
struct address_space *mapping)
@@ -128,20 +166,12 @@
int unmapped_ratio;
long background;
long dirty;
- unsigned long available_memory = vm_total_pages;
+ unsigned long available_memory = determine_dirtyable_memory();
struct task_struct *tsk;
-#ifdef CONFIG_HIGHMEM
- /*
- * We always exclude high memory from our count.
- */
- available_memory -= totalhigh_pages;
-#endif
-
-
unmapped_ratio = 100 - ((global_page_state(NR_FILE_MAPPED) +
global_page_state(NR_ANON_PAGES)) * 100) /
- vm_total_pages;
+ available_memory;
dirty_ratio = vm_dirty_ratio;
if (dirty_ratio > unmapped_ratio / 2)
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 353ce90..5916431 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -156,10 +156,8 @@
static int page_is_consistent(struct zone *zone, struct page *page)
{
-#ifdef CONFIG_HOLES_IN_ZONE
- if (!pfn_valid(page_to_pfn(page)))
+ if (!pfn_valid_within(page_to_pfn(page)))
return 0;
-#endif
if (zone != page_zone(page))
return 0;
@@ -227,7 +225,7 @@
static void free_compound_page(struct page *page)
{
- __free_pages_ok(page, (unsigned long)page[1].lru.prev);
+ __free_pages_ok(page, compound_order(page));
}
static void prep_compound_page(struct page *page, unsigned long order)
@@ -236,12 +234,13 @@
int nr_pages = 1 << order;
set_compound_page_dtor(page, free_compound_page);
- page[1].lru.prev = (void *)order;
- for (i = 0; i < nr_pages; i++) {
+ set_compound_order(page, order);
+ __SetPageHead(page);
+ for (i = 1; i < nr_pages; i++) {
struct page *p = page + i;
- __SetPageCompound(p);
- set_page_private(p, (unsigned long)page);
+ __SetPageTail(p);
+ p->first_page = page;
}
}
@@ -250,16 +249,19 @@
int i;
int nr_pages = 1 << order;
- if (unlikely((unsigned long)page[1].lru.prev != order))
+ if (unlikely(compound_order(page) != order))
bad_page(page);
- for (i = 0; i < nr_pages; i++) {
+ if (unlikely(!PageHead(page)))
+ bad_page(page);
+ __ClearPageHead(page);
+ for (i = 1; i < nr_pages; i++) {
struct page *p = page + i;
- if (unlikely(!PageCompound(p) |
- (page_private(p) != (unsigned long)page)))
+ if (unlikely(!PageTail(p) |
+ (p->first_page != page)))
bad_page(page);
- __ClearPageCompound(p);
+ __ClearPageTail(p);
}
}
@@ -346,10 +348,8 @@
static inline int page_is_buddy(struct page *page, struct page *buddy,
int order)
{
-#ifdef CONFIG_HOLES_IN_ZONE
- if (!pfn_valid(page_to_pfn(buddy)))
+ if (!pfn_valid_within(page_to_pfn(buddy)))
return 0;
-#endif
if (page_zone_id(page) != page_zone_id(buddy))
return 0;
@@ -433,13 +433,18 @@
1 << PG_private |
1 << PG_locked |
1 << PG_active |
- 1 << PG_reclaim |
1 << PG_slab |
1 << PG_swapcache |
1 << PG_writeback |
1 << PG_reserved |
1 << PG_buddy ))))
bad_page(page);
+ /*
+ * PageReclaim == PageTail. It is only an error
+ * for PageReclaim to be set if PageCompound is clear.
+ */
+ if (unlikely(!PageCompound(page) && PageReclaim(page)))
+ bad_page(page);
if (PageDirty(page))
__ClearPageDirty(page);
/*
@@ -665,7 +670,7 @@
}
#if MAX_NUMNODES > 1
-int nr_node_ids __read_mostly;
+int nr_node_ids __read_mostly = MAX_NUMNODES;
EXPORT_SYMBOL(nr_node_ids);
/*
@@ -770,8 +775,8 @@
if (pfn_valid(pfn)) {
struct page *page = pfn_to_page(pfn);
- if (!PageNosave(page))
- ClearPageNosaveFree(page);
+ if (!swsusp_page_is_forbidden(page))
+ swsusp_unset_page_free(page);
}
for (order = MAX_ORDER - 1; order >= 0; --order)
@@ -780,7 +785,7 @@
pfn = page_to_pfn(list_entry(curr, struct page, lru));
for (i = 0; i < (1UL << order); i++)
- SetPageNosaveFree(pfn_to_page(pfn + i));
+ swsusp_set_page_free(pfn_to_page(pfn + i));
}
spin_unlock_irqrestore(&zone->lock, flags);
@@ -3203,7 +3208,8 @@
struct file *file, void __user *buffer, size_t *length, loff_t *ppos)
{
proc_dointvec(table, write, file, buffer, length, ppos);
- setup_per_zone_pages_min();
+ if (write)
+ setup_per_zone_pages_min();
return 0;
}
diff --git a/mm/quicklist.c b/mm/quicklist.c
new file mode 100644
index 0000000..ae8189c
--- /dev/null
+++ b/mm/quicklist.c
@@ -0,0 +1,88 @@
+/*
+ * Quicklist support.
+ *
+ * Quicklists are light weight lists of pages that have a defined state
+ * on alloc and free. Pages must be in the quicklist specific defined state
+ * (zero by default) when the page is freed. It seems that the initial idea
+ * for such lists first came from Dave Miller and then various other people
+ * improved on it.
+ *
+ * Copyright (C) 2007 SGI,
+ * Christoph Lameter <clameter@sgi.com>
+ * Generalized, added support for multiple lists and
+ * constructors / destructors.
+ */
+#include <linux/kernel.h>
+
+#include <linux/mm.h>
+#include <linux/mmzone.h>
+#include <linux/module.h>
+#include <linux/quicklist.h>
+
+DEFINE_PER_CPU(struct quicklist, quicklist)[CONFIG_NR_QUICK];
+
+#define FRACTION_OF_NODE_MEM 16
+
+static unsigned long max_pages(unsigned long min_pages)
+{
+ unsigned long node_free_pages, max;
+
+ node_free_pages = node_page_state(numa_node_id(),
+ NR_FREE_PAGES);
+ max = node_free_pages / FRACTION_OF_NODE_MEM;
+ return max(max, min_pages);
+}
+
+static long min_pages_to_free(struct quicklist *q,
+ unsigned long min_pages, long max_free)
+{
+ long pages_to_free;
+
+ pages_to_free = q->nr_pages - max_pages(min_pages);
+
+ return min(pages_to_free, max_free);
+}
+
+/*
+ * Trim down the number of pages in the quicklist
+ */
+void quicklist_trim(int nr, void (*dtor)(void *),
+ unsigned long min_pages, unsigned long max_free)
+{
+ long pages_to_free;
+ struct quicklist *q;
+
+ q = &get_cpu_var(quicklist)[nr];
+ if (q->nr_pages > min_pages) {
+ pages_to_free = min_pages_to_free(q, min_pages, max_free);
+
+ while (pages_to_free > 0) {
+ /*
+ * We pass a gfp_t of 0 to quicklist_alloc here
+ * because we will never call into the page allocator.
+ */
+ void *p = quicklist_alloc(nr, 0, NULL);
+
+ if (dtor)
+ dtor(p);
+ free_page((unsigned long)p);
+ pages_to_free--;
+ }
+ }
+ put_cpu_var(quicklist);
+}
+
+unsigned long quicklist_total_size(void)
+{
+ unsigned long count = 0;
+ int cpu;
+ struct quicklist *ql, *q;
+
+ for_each_online_cpu(cpu) {
+ ql = per_cpu(quicklist, cpu);
+ for (q = ql; q < ql + CONFIG_NR_QUICK; q++)
+ count += q->nr_pages;
+ }
+ return count;
+}
+
diff --git a/mm/readahead.c b/mm/readahead.c
index 93d9ee6..9861e88 100644
--- a/mm/readahead.c
+++ b/mm/readahead.c
@@ -37,7 +37,7 @@
file_ra_state_init(struct file_ra_state *ra, struct address_space *mapping)
{
ra->ra_pages = mapping->backing_dev_info->ra_pages;
- ra->prev_page = -1;
+ ra->prev_index = -1;
}
EXPORT_SYMBOL_GPL(file_ra_state_init);
@@ -202,17 +202,19 @@
* size: Number of pages in that read
* Together, these form the "current window".
* Together, start and size represent the `readahead window'.
- * prev_page: The page which the readahead algorithm most-recently inspected.
+ * prev_index: The page which the readahead algorithm most-recently inspected.
* It is mainly used to detect sequential file reading.
* If page_cache_readahead sees that it is again being called for
* a page which it just looked at, it can return immediately without
* making any state changes.
+ * offset: Offset in the prev_index where the last read ended - used for
+ * detection of sequential file reading.
* ahead_start,
* ahead_size: Together, these form the "ahead window".
* ra_pages: The externally controlled max readahead for this fd.
*
* When readahead is in the off state (size == 0), readahead is disabled.
- * In this state, prev_page is used to detect the resumption of sequential I/O.
+ * In this state, prev_index is used to detect the resumption of sequential I/O.
*
* The readahead code manages two windows - the "current" and the "ahead"
* windows. The intent is that while the application is walking the pages
@@ -415,7 +417,7 @@
ra->ahead_size = get_next_ra_size(ra);
ra->ahead_start = ra->start + ra->size;
- block = force || (ra->prev_page >= ra->ahead_start);
+ block = force || (ra->prev_index >= ra->ahead_start);
ret = blockable_page_cache_readahead(mapping, filp,
ra->ahead_start, ra->ahead_size, ra, block);
@@ -467,12 +469,13 @@
* We avoid doing extra work and bogusly perturbing the readahead
* window expansion logic.
*/
- if (offset == ra->prev_page && --req_size)
+ if (offset == ra->prev_index && --req_size)
++offset;
- /* Note that prev_page == -1 if it is a first read */
- sequential = (offset == ra->prev_page + 1);
- ra->prev_page = offset;
+ /* Note that prev_index == -1 if it is a first read */
+ sequential = (offset == ra->prev_index + 1);
+ ra->prev_index = offset;
+ ra->prev_offset = 0;
max = get_max_readahead(ra);
newsize = min(req_size, max);
@@ -481,7 +484,7 @@
if (newsize == 0 || (ra->flags & RA_FLAG_INCACHE))
goto out;
- ra->prev_page += newsize - 1;
+ ra->prev_index += newsize - 1;
/*
* Special case - first read at start of file. We'll assume it's
@@ -537,18 +540,18 @@
* we get called back on the first page of the ahead window which
* will allow us to submit more IO.
*/
- if (ra->prev_page >= ra->ahead_start) {
+ if (ra->prev_index >= ra->ahead_start) {
ra->start = ra->ahead_start;
ra->size = ra->ahead_size;
make_ahead_window(mapping, filp, ra, 0);
recheck:
- /* prev_page shouldn't overrun the ahead window */
- ra->prev_page = min(ra->prev_page,
+ /* prev_index shouldn't overrun the ahead window */
+ ra->prev_index = min(ra->prev_index,
ra->ahead_start + ra->ahead_size - 1);
}
out:
- return ra->prev_page + 1;
+ return ra->prev_index + 1;
}
EXPORT_SYMBOL_GPL(page_cache_readahead);
diff --git a/mm/rmap.c b/mm/rmap.c
index 59da5b7..75a32be 100644
--- a/mm/rmap.c
+++ b/mm/rmap.c
@@ -162,8 +162,7 @@
static void anon_vma_ctor(void *data, struct kmem_cache *cachep,
unsigned long flags)
{
- if ((flags & (SLAB_CTOR_VERIFY|SLAB_CTOR_CONSTRUCTOR)) ==
- SLAB_CTOR_CONSTRUCTOR) {
+ if (flags & SLAB_CTOR_CONSTRUCTOR) {
struct anon_vma *anon_vma = data;
spin_lock_init(&anon_vma->lock);
diff --git a/mm/shmem.c b/mm/shmem.c
index b2a35eb..f01e8de 100644
--- a/mm/shmem.c
+++ b/mm/shmem.c
@@ -2358,8 +2358,7 @@
{
struct shmem_inode_info *p = (struct shmem_inode_info *) foo;
- if ((flags & (SLAB_CTOR_VERIFY|SLAB_CTOR_CONSTRUCTOR)) ==
- SLAB_CTOR_CONSTRUCTOR) {
+ if (flags & SLAB_CTOR_CONSTRUCTOR) {
inode_init_once(&p->vfs_inode);
#ifdef CONFIG_TMPFS_POSIX_ACL
p->i_acl = NULL;
diff --git a/mm/slab.c b/mm/slab.c
index 168bfe9..5920a41 100644
--- a/mm/slab.c
+++ b/mm/slab.c
@@ -116,8 +116,7 @@
#include <asm/page.h>
/*
- * DEBUG - 1 for kmem_cache_create() to honour; SLAB_DEBUG_INITIAL,
- * SLAB_RED_ZONE & SLAB_POISON.
+ * DEBUG - 1 for kmem_cache_create() to honour; SLAB_RED_ZONE & SLAB_POISON.
* 0 for faster, smaller code (especially in the critical paths).
*
* STATS - 1 to collect stats for /proc/slabinfo.
@@ -172,15 +171,15 @@
/* Legal flag mask for kmem_cache_create(). */
#if DEBUG
-# define CREATE_MASK (SLAB_DEBUG_INITIAL | SLAB_RED_ZONE | \
+# define CREATE_MASK (SLAB_RED_ZONE | \
SLAB_POISON | SLAB_HWCACHE_ALIGN | \
SLAB_CACHE_DMA | \
- SLAB_MUST_HWCACHE_ALIGN | SLAB_STORE_USER | \
+ SLAB_STORE_USER | \
SLAB_RECLAIM_ACCOUNT | SLAB_PANIC | \
SLAB_DESTROY_BY_RCU | SLAB_MEM_SPREAD)
#else
# define CREATE_MASK (SLAB_HWCACHE_ALIGN | \
- SLAB_CACHE_DMA | SLAB_MUST_HWCACHE_ALIGN | \
+ SLAB_CACHE_DMA | \
SLAB_RECLAIM_ACCOUNT | SLAB_PANIC | \
SLAB_DESTROY_BY_RCU | SLAB_MEM_SPREAD)
#endif
@@ -389,7 +388,6 @@
unsigned int buffer_size;
u32 reciprocal_buffer_size;
/* 3) touched by every alloc & free from the backend */
- struct kmem_list3 *nodelists[MAX_NUMNODES];
unsigned int flags; /* constant flags */
unsigned int num; /* # of objs per slab */
@@ -444,6 +442,17 @@
int obj_offset;
int obj_size;
#endif
+ /*
+ * We put nodelists[] at the end of kmem_cache, because we want to size
+ * this array to nr_node_ids slots instead of MAX_NUMNODES
+ * (see kmem_cache_init())
+ * We still use [MAX_NUMNODES] and not [1] or [0] because cache_cache
+ * is statically defined, so we reserve the max number of nodes.
+ */
+ struct kmem_list3 *nodelists[MAX_NUMNODES];
+ /*
+ * Do not add fields after nodelists[]
+ */
};
#define CFLGS_OFF_SLAB (0x80000000UL)
@@ -592,8 +601,7 @@
static inline struct kmem_cache *page_get_cache(struct page *page)
{
- if (unlikely(PageCompound(page)))
- page = (struct page *)page_private(page);
+ page = compound_head(page);
BUG_ON(!PageSlab(page));
return (struct kmem_cache *)page->lru.next;
}
@@ -605,21 +613,19 @@
static inline struct slab *page_get_slab(struct page *page)
{
- if (unlikely(PageCompound(page)))
- page = (struct page *)page_private(page);
BUG_ON(!PageSlab(page));
return (struct slab *)page->lru.prev;
}
static inline struct kmem_cache *virt_to_cache(const void *obj)
{
- struct page *page = virt_to_page(obj);
+ struct page *page = virt_to_head_page(obj);
return page_get_cache(page);
}
static inline struct slab *virt_to_slab(const void *obj)
{
- struct page *page = virt_to_page(obj);
+ struct page *page = virt_to_head_page(obj);
return page_get_slab(page);
}
@@ -678,9 +684,6 @@
.shared = 1,
.buffer_size = sizeof(struct kmem_cache),
.name = "kmem_cache",
-#if DEBUG
- .obj_size = sizeof(struct kmem_cache),
-#endif
};
#define BAD_ALIEN_MAGIC 0x01020304ul
@@ -1223,19 +1226,20 @@
*/
list_for_each_entry(cachep, &cache_chain, next) {
struct array_cache *nc;
- struct array_cache *shared;
+ struct array_cache *shared = NULL;
struct array_cache **alien = NULL;
nc = alloc_arraycache(node, cachep->limit,
cachep->batchcount);
if (!nc)
goto bad;
- shared = alloc_arraycache(node,
+ if (cachep->shared) {
+ shared = alloc_arraycache(node,
cachep->shared * cachep->batchcount,
0xbaadf00d);
- if (!shared)
- goto bad;
-
+ if (!shared)
+ goto bad;
+ }
if (use_alien_caches) {
alien = alloc_alien_cache(node, cachep->limit);
if (!alien)
@@ -1317,8 +1321,8 @@
shared = l3->shared;
if (shared) {
- free_block(cachep, l3->shared->entry,
- l3->shared->avail, node);
+ free_block(cachep, shared->entry,
+ shared->avail, node);
l3->shared = NULL;
}
@@ -1439,6 +1443,15 @@
cache_cache.array[smp_processor_id()] = &initarray_cache.cache;
cache_cache.nodelists[node] = &initkmem_list3[CACHE_CACHE];
+ /*
+ * struct kmem_cache size depends on nr_node_ids, which
+ * can be less than MAX_NUMNODES.
+ */
+ cache_cache.buffer_size = offsetof(struct kmem_cache, nodelists) +
+ nr_node_ids * sizeof(struct kmem_list3 *);
+#if DEBUG
+ cache_cache.obj_size = cache_cache.buffer_size;
+#endif
cache_cache.buffer_size = ALIGN(cache_cache.buffer_size,
cache_line_size());
cache_cache.reciprocal_buffer_size =
@@ -1932,7 +1945,7 @@
* For setting up all the kmem_list3s for cache whose buffer_size is same as
* size of kmem_list3.
*/
-static void set_up_list3s(struct kmem_cache *cachep, int index)
+static void __init set_up_list3s(struct kmem_cache *cachep, int index)
{
int node;
@@ -2154,13 +2167,15 @@
*/
res = probe_kernel_address(pc->name, tmp);
if (res) {
- printk("SLAB: cache with size %d has lost its name\n",
+ printk(KERN_ERR
+ "SLAB: cache with size %d has lost its name\n",
pc->buffer_size);
continue;
}
if (!strcmp(pc->name, name)) {
- printk("kmem_cache_create: duplicate cache %s\n", name);
+ printk(KERN_ERR
+ "kmem_cache_create: duplicate cache %s\n", name);
dump_stack();
goto oops;
}
@@ -2168,12 +2183,6 @@
#if DEBUG
WARN_ON(strchr(name, ' ')); /* It confuses parsers */
- if ((flags & SLAB_DEBUG_INITIAL) && !ctor) {
- /* No constructor, but inital state check requested */
- printk(KERN_ERR "%s: No con, but init state check "
- "requested - %s\n", __FUNCTION__, name);
- flags &= ~SLAB_DEBUG_INITIAL;
- }
#if FORCED_DEBUG
/*
* Enable redzoning and last user accounting, except for caches with
@@ -2297,7 +2306,8 @@
left_over = calculate_slab_order(cachep, size, align, flags);
if (!cachep->num) {
- printk("kmem_cache_create: couldn't create cache %s.\n", name);
+ printk(KERN_ERR
+ "kmem_cache_create: couldn't create cache %s.\n", name);
kmem_cache_free(&cache_cache, cachep);
cachep = NULL;
goto oops;
@@ -2736,19 +2746,10 @@
* Be lazy and only check for valid flags here, keeping it out of the
* critical path in kmem_cache_alloc().
*/
- BUG_ON(flags & ~(GFP_DMA | GFP_LEVEL_MASK | __GFP_NO_GROW));
- if (flags & __GFP_NO_GROW)
- return 0;
+ BUG_ON(flags & ~(GFP_DMA | GFP_LEVEL_MASK));
ctor_flags = SLAB_CTOR_CONSTRUCTOR;
local_flags = (flags & GFP_LEVEL_MASK);
- if (!(local_flags & __GFP_WAIT))
- /*
- * Not allowed to sleep. Need to tell a constructor about
- * this - it might need to know...
- */
- ctor_flags |= SLAB_CTOR_ATOMIC;
-
/* Take the l3 list lock to change the colour_next on this node */
check_irq_off();
l3 = cachep->nodelists[nodeid];
@@ -2861,7 +2862,7 @@
objp -= obj_offset(cachep);
kfree_debugcheck(objp);
- page = virt_to_page(objp);
+ page = virt_to_head_page(objp);
slabp = page_get_slab(page);
@@ -2878,15 +2879,6 @@
BUG_ON(objnr >= cachep->num);
BUG_ON(objp != index_to_obj(cachep, slabp, objnr));
- if (cachep->flags & SLAB_DEBUG_INITIAL) {
- /*
- * Need to call the slab's constructor so the caller can
- * perform a verify of its state (debugging). Called without
- * the cache-lock held.
- */
- cachep->ctor(objp + obj_offset(cachep),
- cachep, SLAB_CTOR_CONSTRUCTOR | SLAB_CTOR_VERIFY);
- }
if (cachep->flags & SLAB_POISON && cachep->dtor) {
/* we want to cache poison the object,
* call the destruction callback
@@ -2990,6 +2982,14 @@
slabp = list_entry(entry, struct slab, list);
check_slabp(cachep, slabp);
check_spinlock_acquired(cachep);
+
+ /*
+ * The slab was either on partial or free list so
+ * there must be at least one object available for
+ * allocation.
+ */
+ BUG_ON(slabp->inuse < 0 || slabp->inuse >= cachep->num);
+
while (slabp->inuse < cachep->num && batchcount--) {
STATS_INC_ALLOCED(cachep);
STATS_INC_ACTIVE(cachep);
@@ -3077,20 +3077,14 @@
struct slab *slabp;
unsigned objnr;
- slabp = page_get_slab(virt_to_page(objp));
+ slabp = page_get_slab(virt_to_head_page(objp));
objnr = (unsigned)(objp - slabp->s_mem) / cachep->buffer_size;
slab_bufctl(slabp)[objnr] = BUFCTL_ACTIVE;
}
#endif
objp += obj_offset(cachep);
- if (cachep->ctor && cachep->flags & SLAB_POISON) {
- unsigned long ctor_flags = SLAB_CTOR_CONSTRUCTOR;
-
- if (!(flags & __GFP_WAIT))
- ctor_flags |= SLAB_CTOR_ATOMIC;
-
- cachep->ctor(objp, cachep, ctor_flags);
- }
+ if (cachep->ctor && cachep->flags & SLAB_POISON)
+ cachep->ctor(objp, cachep, SLAB_CTOR_CONSTRUCTOR);
#if ARCH_SLAB_MINALIGN
if ((u32)objp & (ARCH_SLAB_MINALIGN-1)) {
printk(KERN_ERR "0x%p: not aligned to ARCH_SLAB_MINALIGN=%d\n",
@@ -3145,7 +3139,7 @@
struct dentry *dir;
int err;
- err = init_fault_attr_dentries(&failslab.attr, "failslab");
+ err = init_fault_attr_dentries(&failslab.attr, "failslab");
if (err)
return err;
dir = failslab.attr.dentries.dir;
@@ -3183,9 +3177,6 @@
check_irq_off();
- if (should_failslab(cachep, flags))
- return NULL;
-
ac = cpu_cache_get(cachep);
if (likely(ac->avail)) {
STATS_INC_ALLOCHIT(cachep);
@@ -3259,7 +3250,7 @@
flags | GFP_THISNODE, nid);
}
- if (!obj && !(flags & __GFP_NO_GROW)) {
+ if (!obj) {
/*
* This allocation will be performed within the constraints
* of the current cpuset / memory policy requirements.
@@ -3377,6 +3368,9 @@
unsigned long save_flags;
void *ptr;
+ if (should_failslab(cachep, flags))
+ return NULL;
+
cache_alloc_debugcheck_before(cachep, flags);
local_irq_save(save_flags);
@@ -3447,6 +3441,9 @@
unsigned long save_flags;
void *objp;
+ if (should_failslab(cachep, flags))
+ return NULL;
+
cache_alloc_debugcheck_before(cachep, flags);
local_irq_save(save_flags);
objp = __do_cache_alloc(cachep, flags);
@@ -3740,6 +3737,53 @@
#endif
/**
+ * krealloc - reallocate memory. The contents will remain unchanged.
+ *
+ * @p: object to reallocate memory for.
+ * @new_size: how many bytes of memory are required.
+ * @flags: the type of memory to allocate.
+ *
+ * The contents of the object pointed to are preserved up to the
+ * lesser of the new and old sizes. If @p is %NULL, krealloc()
+ * behaves exactly like kmalloc(). If @size is 0 and @p is not a
+ * %NULL pointer, the object pointed to is freed.
+ */
+void *krealloc(const void *p, size_t new_size, gfp_t flags)
+{
+ struct kmem_cache *cache, *new_cache;
+ void *ret;
+
+ if (unlikely(!p))
+ return kmalloc_track_caller(new_size, flags);
+
+ if (unlikely(!new_size)) {
+ kfree(p);
+ return NULL;
+ }
+
+ cache = virt_to_cache(p);
+ new_cache = __find_general_cachep(new_size, flags);
+
+ /*
+ * If new size fits in the current cache, bail out.
+ */
+ if (likely(cache == new_cache))
+ return (void *)p;
+
+ /*
+ * We are on the slow-path here so do not use __cache_alloc
+ * because it bloats kernel text.
+ */
+ ret = kmalloc_track_caller(new_size, flags);
+ if (ret) {
+ memcpy(ret, p, min(new_size, ksize(p)));
+ kfree(p);
+ }
+ return ret;
+}
+EXPORT_SYMBOL(krealloc);
+
+/**
* kmem_cache_free - Deallocate an object
* @cachep: The cache the allocation was from.
* @objp: The previously allocated object.
@@ -3815,12 +3859,15 @@
goto fail;
}
- new_shared = alloc_arraycache(node,
+ new_shared = NULL;
+ if (cachep->shared) {
+ new_shared = alloc_arraycache(node,
cachep->shared*cachep->batchcount,
0xbaadf00d);
- if (!new_shared) {
- free_alien_cache(new_alien);
- goto fail;
+ if (!new_shared) {
+ free_alien_cache(new_alien);
+ goto fail;
+ }
}
l3 = cachep->nodelists[node];
@@ -3978,10 +4025,8 @@
* to a larger limit. Thus disabled by default.
*/
shared = 0;
-#ifdef CONFIG_SMP
- if (cachep->buffer_size <= PAGE_SIZE)
+ if (cachep->buffer_size <= PAGE_SIZE && num_possible_cpus() > 1)
shared = 8;
-#endif
#if DEBUG
/*
@@ -4481,7 +4526,7 @@
* allocated with either kmalloc() or kmem_cache_alloc(). The object
* must not be freed during the duration of the call.
*/
-unsigned int ksize(const void *objp)
+size_t ksize(const void *objp)
{
if (unlikely(objp == NULL))
return 0;
diff --git a/mm/slob.c b/mm/slob.c
index 5adc29c..c6933bc 100644
--- a/mm/slob.c
+++ b/mm/slob.c
@@ -21,7 +21,7 @@
*
* SLAB is emulated on top of SLOB by simply calling constructors and
* destructors for every SLAB allocation. Objects are returned with
- * the 8-byte alignment unless the SLAB_MUST_HWCACHE_ALIGN flag is
+ * the 8-byte alignment unless the SLAB_HWCACHE_ALIGN flag is
* set, in which case the low-level allocator will fragment blocks to
* create the proper alignment. Again, objects of page-size or greater
* are allocated by calling __get_free_pages. As SLAB objects know
@@ -150,15 +150,6 @@
spin_unlock_irqrestore(&slob_lock, flags);
}
-static int FASTCALL(find_order(int size));
-static int fastcall find_order(int size)
-{
- int order = 0;
- for ( ; size > 4096 ; size >>=1)
- order++;
- return order;
-}
-
void *__kmalloc(size_t size, gfp_t gfp)
{
slob_t *m;
@@ -174,7 +165,7 @@
if (!bb)
return 0;
- bb->order = find_order(size);
+ bb->order = get_order(size);
bb->pages = (void *)__get_free_pages(gfp, bb->order);
if (bb->pages) {
@@ -190,6 +181,39 @@
}
EXPORT_SYMBOL(__kmalloc);
+/**
+ * krealloc - reallocate memory. The contents will remain unchanged.
+ *
+ * @p: object to reallocate memory for.
+ * @new_size: how many bytes of memory are required.
+ * @flags: the type of memory to allocate.
+ *
+ * The contents of the object pointed to are preserved up to the
+ * lesser of the new and old sizes. If @p is %NULL, krealloc()
+ * behaves exactly like kmalloc(). If @size is 0 and @p is not a
+ * %NULL pointer, the object pointed to is freed.
+ */
+void *krealloc(const void *p, size_t new_size, gfp_t flags)
+{
+ void *ret;
+
+ if (unlikely(!p))
+ return kmalloc_track_caller(new_size, flags);
+
+ if (unlikely(!new_size)) {
+ kfree(p);
+ return NULL;
+ }
+
+ ret = kmalloc_track_caller(new_size, flags);
+ if (ret) {
+ memcpy(ret, p, min(new_size, ksize(p)));
+ kfree(p);
+ }
+ return ret;
+}
+EXPORT_SYMBOL(krealloc);
+
void kfree(const void *block)
{
bigblock_t *bb, **last = &bigblocks;
@@ -219,7 +243,7 @@
EXPORT_SYMBOL(kfree);
-unsigned int ksize(const void *block)
+size_t ksize(const void *block)
{
bigblock_t *bb;
unsigned long flags;
@@ -262,10 +286,11 @@
c->ctor = ctor;
c->dtor = dtor;
/* ignore alignment unless it's forced */
- c->align = (flags & SLAB_MUST_HWCACHE_ALIGN) ? SLOB_ALIGN : 0;
+ c->align = (flags & SLAB_HWCACHE_ALIGN) ? SLOB_ALIGN : 0;
if (c->align < align)
c->align = align;
- }
+ } else if (flags & SLAB_PANIC)
+ panic("Cannot create slab cache %s\n", name);
return c;
}
@@ -284,7 +309,7 @@
if (c->size < PAGE_SIZE)
b = slob_alloc(c->size, flags, c->align);
else
- b = (void *)__get_free_pages(flags, find_order(c->size));
+ b = (void *)__get_free_pages(flags, get_order(c->size));
if (c->ctor)
c->ctor(b, c, SLAB_CTOR_CONSTRUCTOR);
@@ -311,7 +336,7 @@
if (c->size < PAGE_SIZE)
slob_free(b, c->size);
else
- free_pages((unsigned long)b, find_order(c->size));
+ free_pages((unsigned long)b, get_order(c->size));
}
EXPORT_SYMBOL(kmem_cache_free);
diff --git a/mm/slub.c b/mm/slub.c
new file mode 100644
index 0000000..a632348
--- /dev/null
+++ b/mm/slub.c
@@ -0,0 +1,3520 @@
+/*
+ * SLUB: A slab allocator that limits cache line use instead of queuing
+ * objects in per cpu and per node lists.
+ *
+ * The allocator synchronizes using per slab locks and only
+ * uses a centralized lock to manage a pool of partial slabs.
+ *
+ * (C) 2007 SGI, Christoph Lameter <clameter@sgi.com>
+ */
+
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/bit_spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/bitops.h>
+#include <linux/slab.h>
+#include <linux/seq_file.h>
+#include <linux/cpu.h>
+#include <linux/cpuset.h>
+#include <linux/mempolicy.h>
+#include <linux/ctype.h>
+#include <linux/kallsyms.h>
+
+/*
+ * Lock order:
+ * 1. slab_lock(page)
+ * 2. slab->list_lock
+ *
+ * The slab_lock protects operations on the object of a particular
+ * slab and its metadata in the page struct. If the slab lock
+ * has been taken then no allocations nor frees can be performed
+ * on the objects in the slab nor can the slab be added or removed
+ * from the partial or full lists since this would mean modifying
+ * the page_struct of the slab.
+ *
+ * The list_lock protects the partial and full list on each node and
+ * the partial slab counter. If taken then no new slabs may be added or
+ * removed from the lists nor make the number of partial slabs be modified.
+ * (Note that the total number of slabs is an atomic value that may be
+ * modified without taking the list lock).
+ *
+ * The list_lock is a centralized lock and thus we avoid taking it as
+ * much as possible. As long as SLUB does not have to handle partial
+ * slabs, operations can continue without any centralized lock. F.e.
+ * allocating a long series of objects that fill up slabs does not require
+ * the list lock.
+ *
+ * The lock order is sometimes inverted when we are trying to get a slab
+ * off a list. We take the list_lock and then look for a page on the list
+ * to use. While we do that objects in the slabs may be freed. We can
+ * only operate on the slab if we have also taken the slab_lock. So we use
+ * a slab_trylock() on the slab. If trylock was successful then no frees
+ * can occur anymore and we can use the slab for allocations etc. If the
+ * slab_trylock() does not succeed then frees are in progress in the slab and
+ * we must stay away from it for a while since we may cause a bouncing
+ * cacheline if we try to acquire the lock. So go onto the next slab.
+ * If all pages are busy then we may allocate a new slab instead of reusing
+ * a partial slab. A new slab has noone operating on it and thus there is
+ * no danger of cacheline contention.
+ *
+ * Interrupts are disabled during allocation and deallocation in order to
+ * make the slab allocator safe to use in the context of an irq. In addition
+ * interrupts are disabled to ensure that the processor does not change
+ * while handling per_cpu slabs, due to kernel preemption.
+ *
+ * SLUB assigns one slab for allocation to each processor.
+ * Allocations only occur from these slabs called cpu slabs.
+ *
+ * Slabs with free elements are kept on a partial list.
+ * There is no list for full slabs. If an object in a full slab is
+ * freed then the slab will show up again on the partial lists.
+ * Otherwise there is no need to track full slabs unless we have to
+ * track full slabs for debugging purposes.
+ *
+ * Slabs are freed when they become empty. Teardown and setup is
+ * minimal so we rely on the page allocators per cpu caches for
+ * fast frees and allocs.
+ *
+ * Overloading of page flags that are otherwise used for LRU management.
+ *
+ * PageActive The slab is used as a cpu cache. Allocations
+ * may be performed from the slab. The slab is not
+ * on any slab list and cannot be moved onto one.
+ *
+ * PageError Slab requires special handling due to debug
+ * options set. This moves slab handling out of
+ * the fast path.
+ */
+
+/*
+ * Issues still to be resolved:
+ *
+ * - The per cpu array is updated for each new slab and and is a remote
+ * cacheline for most nodes. This could become a bouncing cacheline given
+ * enough frequent updates. There are 16 pointers in a cacheline.so at
+ * max 16 cpus could compete. Likely okay.
+ *
+ * - Support PAGE_ALLOC_DEBUG. Should be easy to do.
+ *
+ * - Variable sizing of the per node arrays
+ */
+
+/* Enable to test recovery from slab corruption on boot */
+#undef SLUB_RESILIENCY_TEST
+
+#if PAGE_SHIFT <= 12
+
+/*
+ * Small page size. Make sure that we do not fragment memory
+ */
+#define DEFAULT_MAX_ORDER 1
+#define DEFAULT_MIN_OBJECTS 4
+
+#else
+
+/*
+ * Large page machines are customarily able to handle larger
+ * page orders.
+ */
+#define DEFAULT_MAX_ORDER 2
+#define DEFAULT_MIN_OBJECTS 8
+
+#endif
+
+/*
+ * Mininum number of partial slabs. These will be left on the partial
+ * lists even if they are empty. kmem_cache_shrink may reclaim them.
+ */
+#define MIN_PARTIAL 2
+
+/*
+ * Maximum number of desirable partial slabs.
+ * The existence of more partial slabs makes kmem_cache_shrink
+ * sort the partial list by the number of objects in the.
+ */
+#define MAX_PARTIAL 10
+
+#define DEBUG_DEFAULT_FLAGS (SLAB_DEBUG_FREE | SLAB_RED_ZONE | \
+ SLAB_POISON | SLAB_STORE_USER)
+/*
+ * Set of flags that will prevent slab merging
+ */
+#define SLUB_NEVER_MERGE (SLAB_RED_ZONE | SLAB_POISON | SLAB_STORE_USER | \
+ SLAB_TRACE | SLAB_DESTROY_BY_RCU)
+
+#define SLUB_MERGE_SAME (SLAB_DEBUG_FREE | SLAB_RECLAIM_ACCOUNT | \
+ SLAB_CACHE_DMA)
+
+#ifndef ARCH_KMALLOC_MINALIGN
+#define ARCH_KMALLOC_MINALIGN __alignof__(unsigned long long)
+#endif
+
+#ifndef ARCH_SLAB_MINALIGN
+#define ARCH_SLAB_MINALIGN __alignof__(unsigned long long)
+#endif
+
+/* Internal SLUB flags */
+#define __OBJECT_POISON 0x80000000 /* Poison object */
+
+static int kmem_size = sizeof(struct kmem_cache);
+
+#ifdef CONFIG_SMP
+static struct notifier_block slab_notifier;
+#endif
+
+static enum {
+ DOWN, /* No slab functionality available */
+ PARTIAL, /* kmem_cache_open() works but kmalloc does not */
+ UP, /* Everything works */
+ SYSFS /* Sysfs up */
+} slab_state = DOWN;
+
+/* A list of all slab caches on the system */
+static DECLARE_RWSEM(slub_lock);
+LIST_HEAD(slab_caches);
+
+#ifdef CONFIG_SYSFS
+static int sysfs_slab_add(struct kmem_cache *);
+static int sysfs_slab_alias(struct kmem_cache *, const char *);
+static void sysfs_slab_remove(struct kmem_cache *);
+#else
+static int sysfs_slab_add(struct kmem_cache *s) { return 0; }
+static int sysfs_slab_alias(struct kmem_cache *s, const char *p) { return 0; }
+static void sysfs_slab_remove(struct kmem_cache *s) {}
+#endif
+
+/********************************************************************
+ * Core slab cache functions
+ *******************************************************************/
+
+int slab_is_available(void)
+{
+ return slab_state >= UP;
+}
+
+static inline struct kmem_cache_node *get_node(struct kmem_cache *s, int node)
+{
+#ifdef CONFIG_NUMA
+ return s->node[node];
+#else
+ return &s->local_node;
+#endif
+}
+
+/*
+ * Object debugging
+ */
+static void print_section(char *text, u8 *addr, unsigned int length)
+{
+ int i, offset;
+ int newline = 1;
+ char ascii[17];
+
+ ascii[16] = 0;
+
+ for (i = 0; i < length; i++) {
+ if (newline) {
+ printk(KERN_ERR "%10s 0x%p: ", text, addr + i);
+ newline = 0;
+ }
+ printk(" %02x", addr[i]);
+ offset = i % 16;
+ ascii[offset] = isgraph(addr[i]) ? addr[i] : '.';
+ if (offset == 15) {
+ printk(" %s\n",ascii);
+ newline = 1;
+ }
+ }
+ if (!newline) {
+ i %= 16;
+ while (i < 16) {
+ printk(" ");
+ ascii[i] = ' ';
+ i++;
+ }
+ printk(" %s\n", ascii);
+ }
+}
+
+/*
+ * Slow version of get and set free pointer.
+ *
+ * This requires touching the cache lines of kmem_cache.
+ * The offset can also be obtained from the page. In that
+ * case it is in the cacheline that we already need to touch.
+ */
+static void *get_freepointer(struct kmem_cache *s, void *object)
+{
+ return *(void **)(object + s->offset);
+}
+
+static void set_freepointer(struct kmem_cache *s, void *object, void *fp)
+{
+ *(void **)(object + s->offset) = fp;
+}
+
+/*
+ * Tracking user of a slab.
+ */
+struct track {
+ void *addr; /* Called from address */
+ int cpu; /* Was running on cpu */
+ int pid; /* Pid context */
+ unsigned long when; /* When did the operation occur */
+};
+
+enum track_item { TRACK_ALLOC, TRACK_FREE };
+
+static struct track *get_track(struct kmem_cache *s, void *object,
+ enum track_item alloc)
+{
+ struct track *p;
+
+ if (s->offset)
+ p = object + s->offset + sizeof(void *);
+ else
+ p = object + s->inuse;
+
+ return p + alloc;
+}
+
+static void set_track(struct kmem_cache *s, void *object,
+ enum track_item alloc, void *addr)
+{
+ struct track *p;
+
+ if (s->offset)
+ p = object + s->offset + sizeof(void *);
+ else
+ p = object + s->inuse;
+
+ p += alloc;
+ if (addr) {
+ p->addr = addr;
+ p->cpu = smp_processor_id();
+ p->pid = current ? current->pid : -1;
+ p->when = jiffies;
+ } else
+ memset(p, 0, sizeof(struct track));
+}
+
+static void init_tracking(struct kmem_cache *s, void *object)
+{
+ if (s->flags & SLAB_STORE_USER) {
+ set_track(s, object, TRACK_FREE, NULL);
+ set_track(s, object, TRACK_ALLOC, NULL);
+ }
+}
+
+static void print_track(const char *s, struct track *t)
+{
+ if (!t->addr)
+ return;
+
+ printk(KERN_ERR "%s: ", s);
+ __print_symbol("%s", (unsigned long)t->addr);
+ printk(" jiffies_ago=%lu cpu=%u pid=%d\n", jiffies - t->when, t->cpu, t->pid);
+}
+
+static void print_trailer(struct kmem_cache *s, u8 *p)
+{
+ unsigned int off; /* Offset of last byte */
+
+ if (s->flags & SLAB_RED_ZONE)
+ print_section("Redzone", p + s->objsize,
+ s->inuse - s->objsize);
+
+ printk(KERN_ERR "FreePointer 0x%p -> 0x%p\n",
+ p + s->offset,
+ get_freepointer(s, p));
+
+ if (s->offset)
+ off = s->offset + sizeof(void *);
+ else
+ off = s->inuse;
+
+ if (s->flags & SLAB_STORE_USER) {
+ print_track("Last alloc", get_track(s, p, TRACK_ALLOC));
+ print_track("Last free ", get_track(s, p, TRACK_FREE));
+ off += 2 * sizeof(struct track);
+ }
+
+ if (off != s->size)
+ /* Beginning of the filler is the free pointer */
+ print_section("Filler", p + off, s->size - off);
+}
+
+static void object_err(struct kmem_cache *s, struct page *page,
+ u8 *object, char *reason)
+{
+ u8 *addr = page_address(page);
+
+ printk(KERN_ERR "*** SLUB %s: %s@0x%p slab 0x%p\n",
+ s->name, reason, object, page);
+ printk(KERN_ERR " offset=%tu flags=0x%04lx inuse=%u freelist=0x%p\n",
+ object - addr, page->flags, page->inuse, page->freelist);
+ if (object > addr + 16)
+ print_section("Bytes b4", object - 16, 16);
+ print_section("Object", object, min(s->objsize, 128));
+ print_trailer(s, object);
+ dump_stack();
+}
+
+static void slab_err(struct kmem_cache *s, struct page *page, char *reason, ...)
+{
+ va_list args;
+ char buf[100];
+
+ va_start(args, reason);
+ vsnprintf(buf, sizeof(buf), reason, args);
+ va_end(args);
+ printk(KERN_ERR "*** SLUB %s: %s in slab @0x%p\n", s->name, buf,
+ page);
+ dump_stack();
+}
+
+static void init_object(struct kmem_cache *s, void *object, int active)
+{
+ u8 *p = object;
+
+ if (s->flags & __OBJECT_POISON) {
+ memset(p, POISON_FREE, s->objsize - 1);
+ p[s->objsize -1] = POISON_END;
+ }
+
+ if (s->flags & SLAB_RED_ZONE)
+ memset(p + s->objsize,
+ active ? SLUB_RED_ACTIVE : SLUB_RED_INACTIVE,
+ s->inuse - s->objsize);
+}
+
+static int check_bytes(u8 *start, unsigned int value, unsigned int bytes)
+{
+ while (bytes) {
+ if (*start != (u8)value)
+ return 0;
+ start++;
+ bytes--;
+ }
+ return 1;
+}
+
+
+static int check_valid_pointer(struct kmem_cache *s, struct page *page,
+ void *object)
+{
+ void *base;
+
+ if (!object)
+ return 1;
+
+ base = page_address(page);
+ if (object < base || object >= base + s->objects * s->size ||
+ (object - base) % s->size) {
+ return 0;
+ }
+
+ return 1;
+}
+
+/*
+ * Object layout:
+ *
+ * object address
+ * Bytes of the object to be managed.
+ * If the freepointer may overlay the object then the free
+ * pointer is the first word of the object.
+ * Poisoning uses 0x6b (POISON_FREE) and the last byte is
+ * 0xa5 (POISON_END)
+ *
+ * object + s->objsize
+ * Padding to reach word boundary. This is also used for Redzoning.
+ * Padding is extended to word size if Redzoning is enabled
+ * and objsize == inuse.
+ * We fill with 0xbb (RED_INACTIVE) for inactive objects and with
+ * 0xcc (RED_ACTIVE) for objects in use.
+ *
+ * object + s->inuse
+ * A. Free pointer (if we cannot overwrite object on free)
+ * B. Tracking data for SLAB_STORE_USER
+ * C. Padding to reach required alignment boundary
+ * Padding is done using 0x5a (POISON_INUSE)
+ *
+ * object + s->size
+ *
+ * If slabcaches are merged then the objsize and inuse boundaries are to
+ * be ignored. And therefore no slab options that rely on these boundaries
+ * may be used with merged slabcaches.
+ */
+
+static void restore_bytes(struct kmem_cache *s, char *message, u8 data,
+ void *from, void *to)
+{
+ printk(KERN_ERR "@@@ SLUB %s: Restoring %s (0x%x) from 0x%p-0x%p\n",
+ s->name, message, data, from, to - 1);
+ memset(from, data, to - from);
+}
+
+static int check_pad_bytes(struct kmem_cache *s, struct page *page, u8 *p)
+{
+ unsigned long off = s->inuse; /* The end of info */
+
+ if (s->offset)
+ /* Freepointer is placed after the object. */
+ off += sizeof(void *);
+
+ if (s->flags & SLAB_STORE_USER)
+ /* We also have user information there */
+ off += 2 * sizeof(struct track);
+
+ if (s->size == off)
+ return 1;
+
+ if (check_bytes(p + off, POISON_INUSE, s->size - off))
+ return 1;
+
+ object_err(s, page, p, "Object padding check fails");
+
+ /*
+ * Restore padding
+ */
+ restore_bytes(s, "object padding", POISON_INUSE, p + off, p + s->size);
+ return 0;
+}
+
+static int slab_pad_check(struct kmem_cache *s, struct page *page)
+{
+ u8 *p;
+ int length, remainder;
+
+ if (!(s->flags & SLAB_POISON))
+ return 1;
+
+ p = page_address(page);
+ length = s->objects * s->size;
+ remainder = (PAGE_SIZE << s->order) - length;
+ if (!remainder)
+ return 1;
+
+ if (!check_bytes(p + length, POISON_INUSE, remainder)) {
+ slab_err(s, page, "Padding check failed");
+ restore_bytes(s, "slab padding", POISON_INUSE, p + length,
+ p + length + remainder);
+ return 0;
+ }
+ return 1;
+}
+
+static int check_object(struct kmem_cache *s, struct page *page,
+ void *object, int active)
+{
+ u8 *p = object;
+ u8 *endobject = object + s->objsize;
+
+ if (s->flags & SLAB_RED_ZONE) {
+ unsigned int red =
+ active ? SLUB_RED_ACTIVE : SLUB_RED_INACTIVE;
+
+ if (!check_bytes(endobject, red, s->inuse - s->objsize)) {
+ object_err(s, page, object,
+ active ? "Redzone Active" : "Redzone Inactive");
+ restore_bytes(s, "redzone", red,
+ endobject, object + s->inuse);
+ return 0;
+ }
+ } else {
+ if ((s->flags & SLAB_POISON) && s->objsize < s->inuse &&
+ !check_bytes(endobject, POISON_INUSE,
+ s->inuse - s->objsize)) {
+ object_err(s, page, p, "Alignment padding check fails");
+ /*
+ * Fix it so that there will not be another report.
+ *
+ * Hmmm... We may be corrupting an object that now expects
+ * to be longer than allowed.
+ */
+ restore_bytes(s, "alignment padding", POISON_INUSE,
+ endobject, object + s->inuse);
+ }
+ }
+
+ if (s->flags & SLAB_POISON) {
+ if (!active && (s->flags & __OBJECT_POISON) &&
+ (!check_bytes(p, POISON_FREE, s->objsize - 1) ||
+ p[s->objsize - 1] != POISON_END)) {
+
+ object_err(s, page, p, "Poison check failed");
+ restore_bytes(s, "Poison", POISON_FREE,
+ p, p + s->objsize -1);
+ restore_bytes(s, "Poison", POISON_END,
+ p + s->objsize - 1, p + s->objsize);
+ return 0;
+ }
+ /*
+ * check_pad_bytes cleans up on its own.
+ */
+ check_pad_bytes(s, page, p);
+ }
+
+ if (!s->offset && active)
+ /*
+ * Object and freepointer overlap. Cannot check
+ * freepointer while object is allocated.
+ */
+ return 1;
+
+ /* Check free pointer validity */
+ if (!check_valid_pointer(s, page, get_freepointer(s, p))) {
+ object_err(s, page, p, "Freepointer corrupt");
+ /*
+ * No choice but to zap it and thus loose the remainder
+ * of the free objects in this slab. May cause
+ * another error because the object count maybe
+ * wrong now.
+ */
+ set_freepointer(s, p, NULL);
+ return 0;
+ }
+ return 1;
+}
+
+static int check_slab(struct kmem_cache *s, struct page *page)
+{
+ VM_BUG_ON(!irqs_disabled());
+
+ if (!PageSlab(page)) {
+ slab_err(s, page, "Not a valid slab page flags=%lx "
+ "mapping=0x%p count=%d", page->flags, page->mapping,
+ page_count(page));
+ return 0;
+ }
+ if (page->offset * sizeof(void *) != s->offset) {
+ slab_err(s, page, "Corrupted offset %lu flags=0x%lx "
+ "mapping=0x%p count=%d",
+ (unsigned long)(page->offset * sizeof(void *)),
+ page->flags,
+ page->mapping,
+ page_count(page));
+ return 0;
+ }
+ if (page->inuse > s->objects) {
+ slab_err(s, page, "inuse %u > max %u @0x%p flags=%lx "
+ "mapping=0x%p count=%d",
+ s->name, page->inuse, s->objects, page->flags,
+ page->mapping, page_count(page));
+ return 0;
+ }
+ /* Slab_pad_check fixes things up after itself */
+ slab_pad_check(s, page);
+ return 1;
+}
+
+/*
+ * Determine if a certain object on a page is on the freelist and
+ * therefore free. Must hold the slab lock for cpu slabs to
+ * guarantee that the chains are consistent.
+ */
+static int on_freelist(struct kmem_cache *s, struct page *page, void *search)
+{
+ int nr = 0;
+ void *fp = page->freelist;
+ void *object = NULL;
+
+ while (fp && nr <= s->objects) {
+ if (fp == search)
+ return 1;
+ if (!check_valid_pointer(s, page, fp)) {
+ if (object) {
+ object_err(s, page, object,
+ "Freechain corrupt");
+ set_freepointer(s, object, NULL);
+ break;
+ } else {
+ slab_err(s, page, "Freepointer 0x%p corrupt",
+ fp);
+ page->freelist = NULL;
+ page->inuse = s->objects;
+ printk(KERN_ERR "@@@ SLUB %s: Freelist "
+ "cleared. Slab 0x%p\n",
+ s->name, page);
+ return 0;
+ }
+ break;
+ }
+ object = fp;
+ fp = get_freepointer(s, object);
+ nr++;
+ }
+
+ if (page->inuse != s->objects - nr) {
+ slab_err(s, page, "Wrong object count. Counter is %d but "
+ "counted were %d", s, page, page->inuse,
+ s->objects - nr);
+ page->inuse = s->objects - nr;
+ printk(KERN_ERR "@@@ SLUB %s: Object count adjusted. "
+ "Slab @0x%p\n", s->name, page);
+ }
+ return search == NULL;
+}
+
+/*
+ * Tracking of fully allocated slabs for debugging
+ */
+static void add_full(struct kmem_cache_node *n, struct page *page)
+{
+ spin_lock(&n->list_lock);
+ list_add(&page->lru, &n->full);
+ spin_unlock(&n->list_lock);
+}
+
+static void remove_full(struct kmem_cache *s, struct page *page)
+{
+ struct kmem_cache_node *n;
+
+ if (!(s->flags & SLAB_STORE_USER))
+ return;
+
+ n = get_node(s, page_to_nid(page));
+
+ spin_lock(&n->list_lock);
+ list_del(&page->lru);
+ spin_unlock(&n->list_lock);
+}
+
+static int alloc_object_checks(struct kmem_cache *s, struct page *page,
+ void *object)
+{
+ if (!check_slab(s, page))
+ goto bad;
+
+ if (object && !on_freelist(s, page, object)) {
+ slab_err(s, page, "Object 0x%p already allocated", object);
+ goto bad;
+ }
+
+ if (!check_valid_pointer(s, page, object)) {
+ object_err(s, page, object, "Freelist Pointer check fails");
+ goto bad;
+ }
+
+ if (!object)
+ return 1;
+
+ if (!check_object(s, page, object, 0))
+ goto bad;
+
+ return 1;
+bad:
+ if (PageSlab(page)) {
+ /*
+ * If this is a slab page then lets do the best we can
+ * to avoid issues in the future. Marking all objects
+ * as used avoids touching the remainder.
+ */
+ printk(KERN_ERR "@@@ SLUB: %s slab 0x%p. Marking all objects used.\n",
+ s->name, page);
+ page->inuse = s->objects;
+ page->freelist = NULL;
+ /* Fix up fields that may be corrupted */
+ page->offset = s->offset / sizeof(void *);
+ }
+ return 0;
+}
+
+static int free_object_checks(struct kmem_cache *s, struct page *page,
+ void *object)
+{
+ if (!check_slab(s, page))
+ goto fail;
+
+ if (!check_valid_pointer(s, page, object)) {
+ slab_err(s, page, "Invalid object pointer 0x%p", object);
+ goto fail;
+ }
+
+ if (on_freelist(s, page, object)) {
+ slab_err(s, page, "Object 0x%p already free", object);
+ goto fail;
+ }
+
+ if (!check_object(s, page, object, 1))
+ return 0;
+
+ if (unlikely(s != page->slab)) {
+ if (!PageSlab(page))
+ slab_err(s, page, "Attempt to free object(0x%p) "
+ "outside of slab", object);
+ else
+ if (!page->slab) {
+ printk(KERN_ERR
+ "SLUB <none>: no slab for object 0x%p.\n",
+ object);
+ dump_stack();
+ }
+ else
+ slab_err(s, page, "object at 0x%p belongs "
+ "to slab %s", object, page->slab->name);
+ goto fail;
+ }
+ return 1;
+fail:
+ printk(KERN_ERR "@@@ SLUB: %s slab 0x%p object at 0x%p not freed.\n",
+ s->name, page, object);
+ return 0;
+}
+
+/*
+ * Slab allocation and freeing
+ */
+static struct page *allocate_slab(struct kmem_cache *s, gfp_t flags, int node)
+{
+ struct page * page;
+ int pages = 1 << s->order;
+
+ if (s->order)
+ flags |= __GFP_COMP;
+
+ if (s->flags & SLAB_CACHE_DMA)
+ flags |= SLUB_DMA;
+
+ if (node == -1)
+ page = alloc_pages(flags, s->order);
+ else
+ page = alloc_pages_node(node, flags, s->order);
+
+ if (!page)
+ return NULL;
+
+ mod_zone_page_state(page_zone(page),
+ (s->flags & SLAB_RECLAIM_ACCOUNT) ?
+ NR_SLAB_RECLAIMABLE : NR_SLAB_UNRECLAIMABLE,
+ pages);
+
+ return page;
+}
+
+static void setup_object(struct kmem_cache *s, struct page *page,
+ void *object)
+{
+ if (PageError(page)) {
+ init_object(s, object, 0);
+ init_tracking(s, object);
+ }
+
+ if (unlikely(s->ctor))
+ s->ctor(object, s, SLAB_CTOR_CONSTRUCTOR);
+}
+
+static struct page *new_slab(struct kmem_cache *s, gfp_t flags, int node)
+{
+ struct page *page;
+ struct kmem_cache_node *n;
+ void *start;
+ void *end;
+ void *last;
+ void *p;
+
+ BUG_ON(flags & ~(GFP_DMA | GFP_LEVEL_MASK));
+
+ if (flags & __GFP_WAIT)
+ local_irq_enable();
+
+ page = allocate_slab(s, flags & GFP_LEVEL_MASK, node);
+ if (!page)
+ goto out;
+
+ n = get_node(s, page_to_nid(page));
+ if (n)
+ atomic_long_inc(&n->nr_slabs);
+ page->offset = s->offset / sizeof(void *);
+ page->slab = s;
+ page->flags |= 1 << PG_slab;
+ if (s->flags & (SLAB_DEBUG_FREE | SLAB_RED_ZONE | SLAB_POISON |
+ SLAB_STORE_USER | SLAB_TRACE))
+ page->flags |= 1 << PG_error;
+
+ start = page_address(page);
+ end = start + s->objects * s->size;
+
+ if (unlikely(s->flags & SLAB_POISON))
+ memset(start, POISON_INUSE, PAGE_SIZE << s->order);
+
+ last = start;
+ for (p = start + s->size; p < end; p += s->size) {
+ setup_object(s, page, last);
+ set_freepointer(s, last, p);
+ last = p;
+ }
+ setup_object(s, page, last);
+ set_freepointer(s, last, NULL);
+
+ page->freelist = start;
+ page->inuse = 0;
+out:
+ if (flags & __GFP_WAIT)
+ local_irq_disable();
+ return page;
+}
+
+static void __free_slab(struct kmem_cache *s, struct page *page)
+{
+ int pages = 1 << s->order;
+
+ if (unlikely(PageError(page) || s->dtor)) {
+ void *start = page_address(page);
+ void *end = start + (pages << PAGE_SHIFT);
+ void *p;
+
+ slab_pad_check(s, page);
+ for (p = start; p <= end - s->size; p += s->size) {
+ if (s->dtor)
+ s->dtor(p, s, 0);
+ check_object(s, page, p, 0);
+ }
+ }
+
+ mod_zone_page_state(page_zone(page),
+ (s->flags & SLAB_RECLAIM_ACCOUNT) ?
+ NR_SLAB_RECLAIMABLE : NR_SLAB_UNRECLAIMABLE,
+ - pages);
+
+ page->mapping = NULL;
+ __free_pages(page, s->order);
+}
+
+static void rcu_free_slab(struct rcu_head *h)
+{
+ struct page *page;
+
+ page = container_of((struct list_head *)h, struct page, lru);
+ __free_slab(page->slab, page);
+}
+
+static void free_slab(struct kmem_cache *s, struct page *page)
+{
+ if (unlikely(s->flags & SLAB_DESTROY_BY_RCU)) {
+ /*
+ * RCU free overloads the RCU head over the LRU
+ */
+ struct rcu_head *head = (void *)&page->lru;
+
+ call_rcu(head, rcu_free_slab);
+ } else
+ __free_slab(s, page);
+}
+
+static void discard_slab(struct kmem_cache *s, struct page *page)
+{
+ struct kmem_cache_node *n = get_node(s, page_to_nid(page));
+
+ atomic_long_dec(&n->nr_slabs);
+ reset_page_mapcount(page);
+ page->flags &= ~(1 << PG_slab | 1 << PG_error);
+ free_slab(s, page);
+}
+
+/*
+ * Per slab locking using the pagelock
+ */
+static __always_inline void slab_lock(struct page *page)
+{
+ bit_spin_lock(PG_locked, &page->flags);
+}
+
+static __always_inline void slab_unlock(struct page *page)
+{
+ bit_spin_unlock(PG_locked, &page->flags);
+}
+
+static __always_inline int slab_trylock(struct page *page)
+{
+ int rc = 1;
+
+ rc = bit_spin_trylock(PG_locked, &page->flags);
+ return rc;
+}
+
+/*
+ * Management of partially allocated slabs
+ */
+static void add_partial_tail(struct kmem_cache_node *n, struct page *page)
+{
+ spin_lock(&n->list_lock);
+ n->nr_partial++;
+ list_add_tail(&page->lru, &n->partial);
+ spin_unlock(&n->list_lock);
+}
+
+static void add_partial(struct kmem_cache_node *n, struct page *page)
+{
+ spin_lock(&n->list_lock);
+ n->nr_partial++;
+ list_add(&page->lru, &n->partial);
+ spin_unlock(&n->list_lock);
+}
+
+static void remove_partial(struct kmem_cache *s,
+ struct page *page)
+{
+ struct kmem_cache_node *n = get_node(s, page_to_nid(page));
+
+ spin_lock(&n->list_lock);
+ list_del(&page->lru);
+ n->nr_partial--;
+ spin_unlock(&n->list_lock);
+}
+
+/*
+ * Lock page and remove it from the partial list
+ *
+ * Must hold list_lock
+ */
+static int lock_and_del_slab(struct kmem_cache_node *n, struct page *page)
+{
+ if (slab_trylock(page)) {
+ list_del(&page->lru);
+ n->nr_partial--;
+ return 1;
+ }
+ return 0;
+}
+
+/*
+ * Try to get a partial slab from a specific node
+ */
+static struct page *get_partial_node(struct kmem_cache_node *n)
+{
+ struct page *page;
+
+ /*
+ * Racy check. If we mistakenly see no partial slabs then we
+ * just allocate an empty slab. If we mistakenly try to get a
+ * partial slab then get_partials() will return NULL.
+ */
+ if (!n || !n->nr_partial)
+ return NULL;
+
+ spin_lock(&n->list_lock);
+ list_for_each_entry(page, &n->partial, lru)
+ if (lock_and_del_slab(n, page))
+ goto out;
+ page = NULL;
+out:
+ spin_unlock(&n->list_lock);
+ return page;
+}
+
+/*
+ * Get a page from somewhere. Search in increasing NUMA
+ * distances.
+ */
+static struct page *get_any_partial(struct kmem_cache *s, gfp_t flags)
+{
+#ifdef CONFIG_NUMA
+ struct zonelist *zonelist;
+ struct zone **z;
+ struct page *page;
+
+ /*
+ * The defrag ratio allows to configure the tradeoffs between
+ * inter node defragmentation and node local allocations.
+ * A lower defrag_ratio increases the tendency to do local
+ * allocations instead of scanning throught the partial
+ * lists on other nodes.
+ *
+ * If defrag_ratio is set to 0 then kmalloc() always
+ * returns node local objects. If its higher then kmalloc()
+ * may return off node objects in order to avoid fragmentation.
+ *
+ * A higher ratio means slabs may be taken from other nodes
+ * thus reducing the number of partial slabs on those nodes.
+ *
+ * If /sys/slab/xx/defrag_ratio is set to 100 (which makes
+ * defrag_ratio = 1000) then every (well almost) allocation
+ * will first attempt to defrag slab caches on other nodes. This
+ * means scanning over all nodes to look for partial slabs which
+ * may be a bit expensive to do on every slab allocation.
+ */
+ if (!s->defrag_ratio || get_cycles() % 1024 > s->defrag_ratio)
+ return NULL;
+
+ zonelist = &NODE_DATA(slab_node(current->mempolicy))
+ ->node_zonelists[gfp_zone(flags)];
+ for (z = zonelist->zones; *z; z++) {
+ struct kmem_cache_node *n;
+
+ n = get_node(s, zone_to_nid(*z));
+
+ if (n && cpuset_zone_allowed_hardwall(*z, flags) &&
+ n->nr_partial > MIN_PARTIAL) {
+ page = get_partial_node(n);
+ if (page)
+ return page;
+ }
+ }
+#endif
+ return NULL;
+}
+
+/*
+ * Get a partial page, lock it and return it.
+ */
+static struct page *get_partial(struct kmem_cache *s, gfp_t flags, int node)
+{
+ struct page *page;
+ int searchnode = (node == -1) ? numa_node_id() : node;
+
+ page = get_partial_node(get_node(s, searchnode));
+ if (page || (flags & __GFP_THISNODE))
+ return page;
+
+ return get_any_partial(s, flags);
+}
+
+/*
+ * Move a page back to the lists.
+ *
+ * Must be called with the slab lock held.
+ *
+ * On exit the slab lock will have been dropped.
+ */
+static void putback_slab(struct kmem_cache *s, struct page *page)
+{
+ struct kmem_cache_node *n = get_node(s, page_to_nid(page));
+
+ if (page->inuse) {
+
+ if (page->freelist)
+ add_partial(n, page);
+ else if (PageError(page) && (s->flags & SLAB_STORE_USER))
+ add_full(n, page);
+ slab_unlock(page);
+
+ } else {
+ if (n->nr_partial < MIN_PARTIAL) {
+ /*
+ * Adding an empty page to the partial slabs in order
+ * to avoid page allocator overhead. This page needs to
+ * come after all the others that are not fully empty
+ * in order to make sure that we do maximum
+ * defragmentation.
+ */
+ add_partial_tail(n, page);
+ slab_unlock(page);
+ } else {
+ slab_unlock(page);
+ discard_slab(s, page);
+ }
+ }
+}
+
+/*
+ * Remove the cpu slab
+ */
+static void deactivate_slab(struct kmem_cache *s, struct page *page, int cpu)
+{
+ s->cpu_slab[cpu] = NULL;
+ ClearPageActive(page);
+
+ putback_slab(s, page);
+}
+
+static void flush_slab(struct kmem_cache *s, struct page *page, int cpu)
+{
+ slab_lock(page);
+ deactivate_slab(s, page, cpu);
+}
+
+/*
+ * Flush cpu slab.
+ * Called from IPI handler with interrupts disabled.
+ */
+static void __flush_cpu_slab(struct kmem_cache *s, int cpu)
+{
+ struct page *page = s->cpu_slab[cpu];
+
+ if (likely(page))
+ flush_slab(s, page, cpu);
+}
+
+static void flush_cpu_slab(void *d)
+{
+ struct kmem_cache *s = d;
+ int cpu = smp_processor_id();
+
+ __flush_cpu_slab(s, cpu);
+}
+
+static void flush_all(struct kmem_cache *s)
+{
+#ifdef CONFIG_SMP
+ on_each_cpu(flush_cpu_slab, s, 1, 1);
+#else
+ unsigned long flags;
+
+ local_irq_save(flags);
+ flush_cpu_slab(s);
+ local_irq_restore(flags);
+#endif
+}
+
+/*
+ * slab_alloc is optimized to only modify two cachelines on the fast path
+ * (aside from the stack):
+ *
+ * 1. The page struct
+ * 2. The first cacheline of the object to be allocated.
+ *
+ * The only cache lines that are read (apart from code) is the
+ * per cpu array in the kmem_cache struct.
+ *
+ * Fastpath is not possible if we need to get a new slab or have
+ * debugging enabled (which means all slabs are marked with PageError)
+ */
+static void *slab_alloc(struct kmem_cache *s,
+ gfp_t gfpflags, int node, void *addr)
+{
+ struct page *page;
+ void **object;
+ unsigned long flags;
+ int cpu;
+
+ local_irq_save(flags);
+ cpu = smp_processor_id();
+ page = s->cpu_slab[cpu];
+ if (!page)
+ goto new_slab;
+
+ slab_lock(page);
+ if (unlikely(node != -1 && page_to_nid(page) != node))
+ goto another_slab;
+redo:
+ object = page->freelist;
+ if (unlikely(!object))
+ goto another_slab;
+ if (unlikely(PageError(page)))
+ goto debug;
+
+have_object:
+ page->inuse++;
+ page->freelist = object[page->offset];
+ slab_unlock(page);
+ local_irq_restore(flags);
+ return object;
+
+another_slab:
+ deactivate_slab(s, page, cpu);
+
+new_slab:
+ page = get_partial(s, gfpflags, node);
+ if (likely(page)) {
+have_slab:
+ s->cpu_slab[cpu] = page;
+ SetPageActive(page);
+ goto redo;
+ }
+
+ page = new_slab(s, gfpflags, node);
+ if (page) {
+ cpu = smp_processor_id();
+ if (s->cpu_slab[cpu]) {
+ /*
+ * Someone else populated the cpu_slab while we enabled
+ * interrupts, or we have got scheduled on another cpu.
+ * The page may not be on the requested node.
+ */
+ if (node == -1 ||
+ page_to_nid(s->cpu_slab[cpu]) == node) {
+ /*
+ * Current cpuslab is acceptable and we
+ * want the current one since its cache hot
+ */
+ discard_slab(s, page);
+ page = s->cpu_slab[cpu];
+ slab_lock(page);
+ goto redo;
+ }
+ /* Dump the current slab */
+ flush_slab(s, s->cpu_slab[cpu], cpu);
+ }
+ slab_lock(page);
+ goto have_slab;
+ }
+ local_irq_restore(flags);
+ return NULL;
+debug:
+ if (!alloc_object_checks(s, page, object))
+ goto another_slab;
+ if (s->flags & SLAB_STORE_USER)
+ set_track(s, object, TRACK_ALLOC, addr);
+ if (s->flags & SLAB_TRACE) {
+ printk(KERN_INFO "TRACE %s alloc 0x%p inuse=%d fp=0x%p\n",
+ s->name, object, page->inuse,
+ page->freelist);
+ dump_stack();
+ }
+ init_object(s, object, 1);
+ goto have_object;
+}
+
+void *kmem_cache_alloc(struct kmem_cache *s, gfp_t gfpflags)
+{
+ return slab_alloc(s, gfpflags, -1, __builtin_return_address(0));
+}
+EXPORT_SYMBOL(kmem_cache_alloc);
+
+#ifdef CONFIG_NUMA
+void *kmem_cache_alloc_node(struct kmem_cache *s, gfp_t gfpflags, int node)
+{
+ return slab_alloc(s, gfpflags, node, __builtin_return_address(0));
+}
+EXPORT_SYMBOL(kmem_cache_alloc_node);
+#endif
+
+/*
+ * The fastpath only writes the cacheline of the page struct and the first
+ * cacheline of the object.
+ *
+ * No special cachelines need to be read
+ */
+static void slab_free(struct kmem_cache *s, struct page *page,
+ void *x, void *addr)
+{
+ void *prior;
+ void **object = (void *)x;
+ unsigned long flags;
+
+ local_irq_save(flags);
+ slab_lock(page);
+
+ if (unlikely(PageError(page)))
+ goto debug;
+checks_ok:
+ prior = object[page->offset] = page->freelist;
+ page->freelist = object;
+ page->inuse--;
+
+ if (unlikely(PageActive(page)))
+ /*
+ * Cpu slabs are never on partial lists and are
+ * never freed.
+ */
+ goto out_unlock;
+
+ if (unlikely(!page->inuse))
+ goto slab_empty;
+
+ /*
+ * Objects left in the slab. If it
+ * was not on the partial list before
+ * then add it.
+ */
+ if (unlikely(!prior))
+ add_partial(get_node(s, page_to_nid(page)), page);
+
+out_unlock:
+ slab_unlock(page);
+ local_irq_restore(flags);
+ return;
+
+slab_empty:
+ if (prior)
+ /*
+ * Slab on the partial list.
+ */
+ remove_partial(s, page);
+
+ slab_unlock(page);
+ discard_slab(s, page);
+ local_irq_restore(flags);
+ return;
+
+debug:
+ if (!free_object_checks(s, page, x))
+ goto out_unlock;
+ if (!PageActive(page) && !page->freelist)
+ remove_full(s, page);
+ if (s->flags & SLAB_STORE_USER)
+ set_track(s, x, TRACK_FREE, addr);
+ if (s->flags & SLAB_TRACE) {
+ printk(KERN_INFO "TRACE %s free 0x%p inuse=%d fp=0x%p\n",
+ s->name, object, page->inuse,
+ page->freelist);
+ print_section("Object", (void *)object, s->objsize);
+ dump_stack();
+ }
+ init_object(s, object, 0);
+ goto checks_ok;
+}
+
+void kmem_cache_free(struct kmem_cache *s, void *x)
+{
+ struct page *page;
+
+ page = virt_to_head_page(x);
+
+ slab_free(s, page, x, __builtin_return_address(0));
+}
+EXPORT_SYMBOL(kmem_cache_free);
+
+/* Figure out on which slab object the object resides */
+static struct page *get_object_page(const void *x)
+{
+ struct page *page = virt_to_head_page(x);
+
+ if (!PageSlab(page))
+ return NULL;
+
+ return page;
+}
+
+/*
+ * kmem_cache_open produces objects aligned at "size" and the first object
+ * is placed at offset 0 in the slab (We have no metainformation on the
+ * slab, all slabs are in essence "off slab").
+ *
+ * In order to get the desired alignment one just needs to align the
+ * size.
+ *
+ * Notice that the allocation order determines the sizes of the per cpu
+ * caches. Each processor has always one slab available for allocations.
+ * Increasing the allocation order reduces the number of times that slabs
+ * must be moved on and off the partial lists and therefore may influence
+ * locking overhead.
+ *
+ * The offset is used to relocate the free list link in each object. It is
+ * therefore possible to move the free list link behind the object. This
+ * is necessary for RCU to work properly and also useful for debugging.
+ */
+
+/*
+ * Mininum / Maximum order of slab pages. This influences locking overhead
+ * and slab fragmentation. A higher order reduces the number of partial slabs
+ * and increases the number of allocations possible without having to
+ * take the list_lock.
+ */
+static int slub_min_order;
+static int slub_max_order = DEFAULT_MAX_ORDER;
+
+/*
+ * Minimum number of objects per slab. This is necessary in order to
+ * reduce locking overhead. Similar to the queue size in SLAB.
+ */
+static int slub_min_objects = DEFAULT_MIN_OBJECTS;
+
+/*
+ * Merge control. If this is set then no merging of slab caches will occur.
+ */
+static int slub_nomerge;
+
+/*
+ * Debug settings:
+ */
+static int slub_debug;
+
+static char *slub_debug_slabs;
+
+/*
+ * Calculate the order of allocation given an slab object size.
+ *
+ * The order of allocation has significant impact on other elements
+ * of the system. Generally order 0 allocations should be preferred
+ * since they do not cause fragmentation in the page allocator. Larger
+ * objects may have problems with order 0 because there may be too much
+ * space left unused in a slab. We go to a higher order if more than 1/8th
+ * of the slab would be wasted.
+ *
+ * In order to reach satisfactory performance we must ensure that
+ * a minimum number of objects is in one slab. Otherwise we may
+ * generate too much activity on the partial lists. This is less a
+ * concern for large slabs though. slub_max_order specifies the order
+ * where we begin to stop considering the number of objects in a slab.
+ *
+ * Higher order allocations also allow the placement of more objects
+ * in a slab and thereby reduce object handling overhead. If the user
+ * has requested a higher mininum order then we start with that one
+ * instead of zero.
+ */
+static int calculate_order(int size)
+{
+ int order;
+ int rem;
+
+ for (order = max(slub_min_order, fls(size - 1) - PAGE_SHIFT);
+ order < MAX_ORDER; order++) {
+ unsigned long slab_size = PAGE_SIZE << order;
+
+ if (slub_max_order > order &&
+ slab_size < slub_min_objects * size)
+ continue;
+
+ if (slab_size < size)
+ continue;
+
+ rem = slab_size % size;
+
+ if (rem <= (PAGE_SIZE << order) / 8)
+ break;
+
+ }
+ if (order >= MAX_ORDER)
+ return -E2BIG;
+ return order;
+}
+
+/*
+ * Function to figure out which alignment to use from the
+ * various ways of specifying it.
+ */
+static unsigned long calculate_alignment(unsigned long flags,
+ unsigned long align, unsigned long size)
+{
+ /*
+ * If the user wants hardware cache aligned objects then
+ * follow that suggestion if the object is sufficiently
+ * large.
+ *
+ * The hardware cache alignment cannot override the
+ * specified alignment though. If that is greater
+ * then use it.
+ */
+ if ((flags & SLAB_HWCACHE_ALIGN) &&
+ size > L1_CACHE_BYTES / 2)
+ return max_t(unsigned long, align, L1_CACHE_BYTES);
+
+ if (align < ARCH_SLAB_MINALIGN)
+ return ARCH_SLAB_MINALIGN;
+
+ return ALIGN(align, sizeof(void *));
+}
+
+static void init_kmem_cache_node(struct kmem_cache_node *n)
+{
+ n->nr_partial = 0;
+ atomic_long_set(&n->nr_slabs, 0);
+ spin_lock_init(&n->list_lock);
+ INIT_LIST_HEAD(&n->partial);
+ INIT_LIST_HEAD(&n->full);
+}
+
+#ifdef CONFIG_NUMA
+/*
+ * No kmalloc_node yet so do it by hand. We know that this is the first
+ * slab on the node for this slabcache. There are no concurrent accesses
+ * possible.
+ *
+ * Note that this function only works on the kmalloc_node_cache
+ * when allocating for the kmalloc_node_cache.
+ */
+static struct kmem_cache_node * __init early_kmem_cache_node_alloc(gfp_t gfpflags,
+ int node)
+{
+ struct page *page;
+ struct kmem_cache_node *n;
+
+ BUG_ON(kmalloc_caches->size < sizeof(struct kmem_cache_node));
+
+ page = new_slab(kmalloc_caches, gfpflags | GFP_THISNODE, node);
+ /* new_slab() disables interupts */
+ local_irq_enable();
+
+ BUG_ON(!page);
+ n = page->freelist;
+ BUG_ON(!n);
+ page->freelist = get_freepointer(kmalloc_caches, n);
+ page->inuse++;
+ kmalloc_caches->node[node] = n;
+ init_object(kmalloc_caches, n, 1);
+ init_kmem_cache_node(n);
+ atomic_long_inc(&n->nr_slabs);
+ add_partial(n, page);
+ return n;
+}
+
+static void free_kmem_cache_nodes(struct kmem_cache *s)
+{
+ int node;
+
+ for_each_online_node(node) {
+ struct kmem_cache_node *n = s->node[node];
+ if (n && n != &s->local_node)
+ kmem_cache_free(kmalloc_caches, n);
+ s->node[node] = NULL;
+ }
+}
+
+static int init_kmem_cache_nodes(struct kmem_cache *s, gfp_t gfpflags)
+{
+ int node;
+ int local_node;
+
+ if (slab_state >= UP)
+ local_node = page_to_nid(virt_to_page(s));
+ else
+ local_node = 0;
+
+ for_each_online_node(node) {
+ struct kmem_cache_node *n;
+
+ if (local_node == node)
+ n = &s->local_node;
+ else {
+ if (slab_state == DOWN) {
+ n = early_kmem_cache_node_alloc(gfpflags,
+ node);
+ continue;
+ }
+ n = kmem_cache_alloc_node(kmalloc_caches,
+ gfpflags, node);
+
+ if (!n) {
+ free_kmem_cache_nodes(s);
+ return 0;
+ }
+
+ }
+ s->node[node] = n;
+ init_kmem_cache_node(n);
+ }
+ return 1;
+}
+#else
+static void free_kmem_cache_nodes(struct kmem_cache *s)
+{
+}
+
+static int init_kmem_cache_nodes(struct kmem_cache *s, gfp_t gfpflags)
+{
+ init_kmem_cache_node(&s->local_node);
+ return 1;
+}
+#endif
+
+/*
+ * calculate_sizes() determines the order and the distribution of data within
+ * a slab object.
+ */
+static int calculate_sizes(struct kmem_cache *s)
+{
+ unsigned long flags = s->flags;
+ unsigned long size = s->objsize;
+ unsigned long align = s->align;
+
+ /*
+ * Determine if we can poison the object itself. If the user of
+ * the slab may touch the object after free or before allocation
+ * then we should never poison the object itself.
+ */
+ if ((flags & SLAB_POISON) && !(flags & SLAB_DESTROY_BY_RCU) &&
+ !s->ctor && !s->dtor)
+ s->flags |= __OBJECT_POISON;
+ else
+ s->flags &= ~__OBJECT_POISON;
+
+ /*
+ * Round up object size to the next word boundary. We can only
+ * place the free pointer at word boundaries and this determines
+ * the possible location of the free pointer.
+ */
+ size = ALIGN(size, sizeof(void *));
+
+ /*
+ * If we are redzoning then check if there is some space between the
+ * end of the object and the free pointer. If not then add an
+ * additional word, so that we can establish a redzone between
+ * the object and the freepointer to be able to check for overwrites.
+ */
+ if ((flags & SLAB_RED_ZONE) && size == s->objsize)
+ size += sizeof(void *);
+
+ /*
+ * With that we have determined how much of the slab is in actual
+ * use by the object. This is the potential offset to the free
+ * pointer.
+ */
+ s->inuse = size;
+
+ if (((flags & (SLAB_DESTROY_BY_RCU | SLAB_POISON)) ||
+ s->ctor || s->dtor)) {
+ /*
+ * Relocate free pointer after the object if it is not
+ * permitted to overwrite the first word of the object on
+ * kmem_cache_free.
+ *
+ * This is the case if we do RCU, have a constructor or
+ * destructor or are poisoning the objects.
+ */
+ s->offset = size;
+ size += sizeof(void *);
+ }
+
+ if (flags & SLAB_STORE_USER)
+ /*
+ * Need to store information about allocs and frees after
+ * the object.
+ */
+ size += 2 * sizeof(struct track);
+
+ if (flags & DEBUG_DEFAULT_FLAGS)
+ /*
+ * Add some empty padding so that we can catch
+ * overwrites from earlier objects rather than let
+ * tracking information or the free pointer be
+ * corrupted if an user writes before the start
+ * of the object.
+ */
+ size += sizeof(void *);
+ /*
+ * Determine the alignment based on various parameters that the
+ * user specified (this is unecessarily complex due to the attempt
+ * to be compatible with SLAB. Should be cleaned up some day).
+ */
+ align = calculate_alignment(flags, align, s->objsize);
+
+ /*
+ * SLUB stores one object immediately after another beginning from
+ * offset 0. In order to align the objects we have to simply size
+ * each object to conform to the alignment.
+ */
+ size = ALIGN(size, align);
+ s->size = size;
+
+ s->order = calculate_order(size);
+ if (s->order < 0)
+ return 0;
+
+ /*
+ * Determine the number of objects per slab
+ */
+ s->objects = (PAGE_SIZE << s->order) / size;
+
+ /*
+ * Verify that the number of objects is within permitted limits.
+ * The page->inuse field is only 16 bit wide! So we cannot have
+ * more than 64k objects per slab.
+ */
+ if (!s->objects || s->objects > 65535)
+ return 0;
+ return 1;
+
+}
+
+static int __init finish_bootstrap(void)
+{
+ struct list_head *h;
+ int err;
+
+ slab_state = SYSFS;
+
+ list_for_each(h, &slab_caches) {
+ struct kmem_cache *s =
+ container_of(h, struct kmem_cache, list);
+
+ err = sysfs_slab_add(s);
+ BUG_ON(err);
+ }
+ return 0;
+}
+
+static int kmem_cache_open(struct kmem_cache *s, gfp_t gfpflags,
+ const char *name, size_t size,
+ size_t align, unsigned long flags,
+ void (*ctor)(void *, struct kmem_cache *, unsigned long),
+ void (*dtor)(void *, struct kmem_cache *, unsigned long))
+{
+ memset(s, 0, kmem_size);
+ s->name = name;
+ s->ctor = ctor;
+ s->dtor = dtor;
+ s->objsize = size;
+ s->flags = flags;
+ s->align = align;
+
+ /*
+ * The page->offset field is only 16 bit wide. This is an offset
+ * in units of words from the beginning of an object. If the slab
+ * size is bigger then we cannot move the free pointer behind the
+ * object anymore.
+ *
+ * On 32 bit platforms the limit is 256k. On 64bit platforms
+ * the limit is 512k.
+ *
+ * Debugging or ctor/dtors may create a need to move the free
+ * pointer. Fail if this happens.
+ */
+ if (s->size >= 65535 * sizeof(void *)) {
+ BUG_ON(flags & (SLAB_RED_ZONE | SLAB_POISON |
+ SLAB_STORE_USER | SLAB_DESTROY_BY_RCU));
+ BUG_ON(ctor || dtor);
+ }
+ else
+ /*
+ * Enable debugging if selected on the kernel commandline.
+ */
+ if (slub_debug && (!slub_debug_slabs ||
+ strncmp(slub_debug_slabs, name,
+ strlen(slub_debug_slabs)) == 0))
+ s->flags |= slub_debug;
+
+ if (!calculate_sizes(s))
+ goto error;
+
+ s->refcount = 1;
+#ifdef CONFIG_NUMA
+ s->defrag_ratio = 100;
+#endif
+
+ if (init_kmem_cache_nodes(s, gfpflags & ~SLUB_DMA))
+ return 1;
+error:
+ if (flags & SLAB_PANIC)
+ panic("Cannot create slab %s size=%lu realsize=%u "
+ "order=%u offset=%u flags=%lx\n",
+ s->name, (unsigned long)size, s->size, s->order,
+ s->offset, flags);
+ return 0;
+}
+EXPORT_SYMBOL(kmem_cache_open);
+
+/*
+ * Check if a given pointer is valid
+ */
+int kmem_ptr_validate(struct kmem_cache *s, const void *object)
+{
+ struct page * page;
+ void *addr;
+
+ page = get_object_page(object);
+
+ if (!page || s != page->slab)
+ /* No slab or wrong slab */
+ return 0;
+
+ addr = page_address(page);
+ if (object < addr || object >= addr + s->objects * s->size)
+ /* Out of bounds */
+ return 0;
+
+ if ((object - addr) % s->size)
+ /* Improperly aligned */
+ return 0;
+
+ /*
+ * We could also check if the object is on the slabs freelist.
+ * But this would be too expensive and it seems that the main
+ * purpose of kmem_ptr_valid is to check if the object belongs
+ * to a certain slab.
+ */
+ return 1;
+}
+EXPORT_SYMBOL(kmem_ptr_validate);
+
+/*
+ * Determine the size of a slab object
+ */
+unsigned int kmem_cache_size(struct kmem_cache *s)
+{
+ return s->objsize;
+}
+EXPORT_SYMBOL(kmem_cache_size);
+
+const char *kmem_cache_name(struct kmem_cache *s)
+{
+ return s->name;
+}
+EXPORT_SYMBOL(kmem_cache_name);
+
+/*
+ * Attempt to free all slabs on a node
+ */
+static int free_list(struct kmem_cache *s, struct kmem_cache_node *n,
+ struct list_head *list)
+{
+ int slabs_inuse = 0;
+ unsigned long flags;
+ struct page *page, *h;
+
+ spin_lock_irqsave(&n->list_lock, flags);
+ list_for_each_entry_safe(page, h, list, lru)
+ if (!page->inuse) {
+ list_del(&page->lru);
+ discard_slab(s, page);
+ } else
+ slabs_inuse++;
+ spin_unlock_irqrestore(&n->list_lock, flags);
+ return slabs_inuse;
+}
+
+/*
+ * Release all resources used by slab cache
+ */
+static int kmem_cache_close(struct kmem_cache *s)
+{
+ int node;
+
+ flush_all(s);
+
+ /* Attempt to free all objects */
+ for_each_online_node(node) {
+ struct kmem_cache_node *n = get_node(s, node);
+
+ n->nr_partial -= free_list(s, n, &n->partial);
+ if (atomic_long_read(&n->nr_slabs))
+ return 1;
+ }
+ free_kmem_cache_nodes(s);
+ return 0;
+}
+
+/*
+ * Close a cache and release the kmem_cache structure
+ * (must be used for caches created using kmem_cache_create)
+ */
+void kmem_cache_destroy(struct kmem_cache *s)
+{
+ down_write(&slub_lock);
+ s->refcount--;
+ if (!s->refcount) {
+ list_del(&s->list);
+ if (kmem_cache_close(s))
+ WARN_ON(1);
+ sysfs_slab_remove(s);
+ kfree(s);
+ }
+ up_write(&slub_lock);
+}
+EXPORT_SYMBOL(kmem_cache_destroy);
+
+/********************************************************************
+ * Kmalloc subsystem
+ *******************************************************************/
+
+struct kmem_cache kmalloc_caches[KMALLOC_SHIFT_HIGH + 1] __cacheline_aligned;
+EXPORT_SYMBOL(kmalloc_caches);
+
+#ifdef CONFIG_ZONE_DMA
+static struct kmem_cache *kmalloc_caches_dma[KMALLOC_SHIFT_HIGH + 1];
+#endif
+
+static int __init setup_slub_min_order(char *str)
+{
+ get_option (&str, &slub_min_order);
+
+ return 1;
+}
+
+__setup("slub_min_order=", setup_slub_min_order);
+
+static int __init setup_slub_max_order(char *str)
+{
+ get_option (&str, &slub_max_order);
+
+ return 1;
+}
+
+__setup("slub_max_order=", setup_slub_max_order);
+
+static int __init setup_slub_min_objects(char *str)
+{
+ get_option (&str, &slub_min_objects);
+
+ return 1;
+}
+
+__setup("slub_min_objects=", setup_slub_min_objects);
+
+static int __init setup_slub_nomerge(char *str)
+{
+ slub_nomerge = 1;
+ return 1;
+}
+
+__setup("slub_nomerge", setup_slub_nomerge);
+
+static int __init setup_slub_debug(char *str)
+{
+ if (!str || *str != '=')
+ slub_debug = DEBUG_DEFAULT_FLAGS;
+ else {
+ str++;
+ if (*str == 0 || *str == ',')
+ slub_debug = DEBUG_DEFAULT_FLAGS;
+ else
+ for( ;*str && *str != ','; str++)
+ switch (*str) {
+ case 'f' : case 'F' :
+ slub_debug |= SLAB_DEBUG_FREE;
+ break;
+ case 'z' : case 'Z' :
+ slub_debug |= SLAB_RED_ZONE;
+ break;
+ case 'p' : case 'P' :
+ slub_debug |= SLAB_POISON;
+ break;
+ case 'u' : case 'U' :
+ slub_debug |= SLAB_STORE_USER;
+ break;
+ case 't' : case 'T' :
+ slub_debug |= SLAB_TRACE;
+ break;
+ default:
+ printk(KERN_ERR "slub_debug option '%c' "
+ "unknown. skipped\n",*str);
+ }
+ }
+
+ if (*str == ',')
+ slub_debug_slabs = str + 1;
+ return 1;
+}
+
+__setup("slub_debug", setup_slub_debug);
+
+static struct kmem_cache *create_kmalloc_cache(struct kmem_cache *s,
+ const char *name, int size, gfp_t gfp_flags)
+{
+ unsigned int flags = 0;
+
+ if (gfp_flags & SLUB_DMA)
+ flags = SLAB_CACHE_DMA;
+
+ down_write(&slub_lock);
+ if (!kmem_cache_open(s, gfp_flags, name, size, ARCH_KMALLOC_MINALIGN,
+ flags, NULL, NULL))
+ goto panic;
+
+ list_add(&s->list, &slab_caches);
+ up_write(&slub_lock);
+ if (sysfs_slab_add(s))
+ goto panic;
+ return s;
+
+panic:
+ panic("Creation of kmalloc slab %s size=%d failed.\n", name, size);
+}
+
+static struct kmem_cache *get_slab(size_t size, gfp_t flags)
+{
+ int index = kmalloc_index(size);
+
+ if (!index)
+ return NULL;
+
+ /* Allocation too large? */
+ BUG_ON(index < 0);
+
+#ifdef CONFIG_ZONE_DMA
+ if ((flags & SLUB_DMA)) {
+ struct kmem_cache *s;
+ struct kmem_cache *x;
+ char *text;
+ size_t realsize;
+
+ s = kmalloc_caches_dma[index];
+ if (s)
+ return s;
+
+ /* Dynamically create dma cache */
+ x = kmalloc(kmem_size, flags & ~SLUB_DMA);
+ if (!x)
+ panic("Unable to allocate memory for dma cache\n");
+
+ if (index <= KMALLOC_SHIFT_HIGH)
+ realsize = 1 << index;
+ else {
+ if (index == 1)
+ realsize = 96;
+ else
+ realsize = 192;
+ }
+
+ text = kasprintf(flags & ~SLUB_DMA, "kmalloc_dma-%d",
+ (unsigned int)realsize);
+ s = create_kmalloc_cache(x, text, realsize, flags);
+ kmalloc_caches_dma[index] = s;
+ return s;
+ }
+#endif
+ return &kmalloc_caches[index];
+}
+
+void *__kmalloc(size_t size, gfp_t flags)
+{
+ struct kmem_cache *s = get_slab(size, flags);
+
+ if (s)
+ return slab_alloc(s, flags, -1, __builtin_return_address(0));
+ return NULL;
+}
+EXPORT_SYMBOL(__kmalloc);
+
+#ifdef CONFIG_NUMA
+void *__kmalloc_node(size_t size, gfp_t flags, int node)
+{
+ struct kmem_cache *s = get_slab(size, flags);
+
+ if (s)
+ return slab_alloc(s, flags, node, __builtin_return_address(0));
+ return NULL;
+}
+EXPORT_SYMBOL(__kmalloc_node);
+#endif
+
+size_t ksize(const void *object)
+{
+ struct page *page = get_object_page(object);
+ struct kmem_cache *s;
+
+ BUG_ON(!page);
+ s = page->slab;
+ BUG_ON(!s);
+
+ /*
+ * Debugging requires use of the padding between object
+ * and whatever may come after it.
+ */
+ if (s->flags & (SLAB_RED_ZONE | SLAB_POISON))
+ return s->objsize;
+
+ /*
+ * If we have the need to store the freelist pointer
+ * back there or track user information then we can
+ * only use the space before that information.
+ */
+ if (s->flags & (SLAB_DESTROY_BY_RCU | SLAB_STORE_USER))
+ return s->inuse;
+
+ /*
+ * Else we can use all the padding etc for the allocation
+ */
+ return s->size;
+}
+EXPORT_SYMBOL(ksize);
+
+void kfree(const void *x)
+{
+ struct kmem_cache *s;
+ struct page *page;
+
+ if (!x)
+ return;
+
+ page = virt_to_head_page(x);
+ s = page->slab;
+
+ slab_free(s, page, (void *)x, __builtin_return_address(0));
+}
+EXPORT_SYMBOL(kfree);
+
+/*
+ * kmem_cache_shrink removes empty slabs from the partial lists
+ * and then sorts the partially allocated slabs by the number
+ * of items in use. The slabs with the most items in use
+ * come first. New allocations will remove these from the
+ * partial list because they are full. The slabs with the
+ * least items are placed last. If it happens that the objects
+ * are freed then the page can be returned to the page allocator.
+ */
+int kmem_cache_shrink(struct kmem_cache *s)
+{
+ int node;
+ int i;
+ struct kmem_cache_node *n;
+ struct page *page;
+ struct page *t;
+ struct list_head *slabs_by_inuse =
+ kmalloc(sizeof(struct list_head) * s->objects, GFP_KERNEL);
+ unsigned long flags;
+
+ if (!slabs_by_inuse)
+ return -ENOMEM;
+
+ flush_all(s);
+ for_each_online_node(node) {
+ n = get_node(s, node);
+
+ if (!n->nr_partial)
+ continue;
+
+ for (i = 0; i < s->objects; i++)
+ INIT_LIST_HEAD(slabs_by_inuse + i);
+
+ spin_lock_irqsave(&n->list_lock, flags);
+
+ /*
+ * Build lists indexed by the items in use in
+ * each slab or free slabs if empty.
+ *
+ * Note that concurrent frees may occur while
+ * we hold the list_lock. page->inuse here is
+ * the upper limit.
+ */
+ list_for_each_entry_safe(page, t, &n->partial, lru) {
+ if (!page->inuse && slab_trylock(page)) {
+ /*
+ * Must hold slab lock here because slab_free
+ * may have freed the last object and be
+ * waiting to release the slab.
+ */
+ list_del(&page->lru);
+ n->nr_partial--;
+ slab_unlock(page);
+ discard_slab(s, page);
+ } else {
+ if (n->nr_partial > MAX_PARTIAL)
+ list_move(&page->lru,
+ slabs_by_inuse + page->inuse);
+ }
+ }
+
+ if (n->nr_partial <= MAX_PARTIAL)
+ goto out;
+
+ /*
+ * Rebuild the partial list with the slabs filled up
+ * most first and the least used slabs at the end.
+ */
+ for (i = s->objects - 1; i >= 0; i--)
+ list_splice(slabs_by_inuse + i, n->partial.prev);
+
+ out:
+ spin_unlock_irqrestore(&n->list_lock, flags);
+ }
+
+ kfree(slabs_by_inuse);
+ return 0;
+}
+EXPORT_SYMBOL(kmem_cache_shrink);
+
+/**
+ * krealloc - reallocate memory. The contents will remain unchanged.
+ *
+ * @p: object to reallocate memory for.
+ * @new_size: how many bytes of memory are required.
+ * @flags: the type of memory to allocate.
+ *
+ * The contents of the object pointed to are preserved up to the
+ * lesser of the new and old sizes. If @p is %NULL, krealloc()
+ * behaves exactly like kmalloc(). If @size is 0 and @p is not a
+ * %NULL pointer, the object pointed to is freed.
+ */
+void *krealloc(const void *p, size_t new_size, gfp_t flags)
+{
+ struct kmem_cache *new_cache;
+ void *ret;
+ struct page *page;
+
+ if (unlikely(!p))
+ return kmalloc(new_size, flags);
+
+ if (unlikely(!new_size)) {
+ kfree(p);
+ return NULL;
+ }
+
+ page = virt_to_head_page(p);
+
+ new_cache = get_slab(new_size, flags);
+
+ /*
+ * If new size fits in the current cache, bail out.
+ */
+ if (likely(page->slab == new_cache))
+ return (void *)p;
+
+ ret = kmalloc(new_size, flags);
+ if (ret) {
+ memcpy(ret, p, min(new_size, ksize(p)));
+ kfree(p);
+ }
+ return ret;
+}
+EXPORT_SYMBOL(krealloc);
+
+/********************************************************************
+ * Basic setup of slabs
+ *******************************************************************/
+
+void __init kmem_cache_init(void)
+{
+ int i;
+
+#ifdef CONFIG_NUMA
+ /*
+ * Must first have the slab cache available for the allocations of the
+ * struct kmalloc_cache_node's. There is special bootstrap code in
+ * kmem_cache_open for slab_state == DOWN.
+ */
+ create_kmalloc_cache(&kmalloc_caches[0], "kmem_cache_node",
+ sizeof(struct kmem_cache_node), GFP_KERNEL);
+#endif
+
+ /* Able to allocate the per node structures */
+ slab_state = PARTIAL;
+
+ /* Caches that are not of the two-to-the-power-of size */
+ create_kmalloc_cache(&kmalloc_caches[1],
+ "kmalloc-96", 96, GFP_KERNEL);
+ create_kmalloc_cache(&kmalloc_caches[2],
+ "kmalloc-192", 192, GFP_KERNEL);
+
+ for (i = KMALLOC_SHIFT_LOW; i <= KMALLOC_SHIFT_HIGH; i++)
+ create_kmalloc_cache(&kmalloc_caches[i],
+ "kmalloc", 1 << i, GFP_KERNEL);
+
+ slab_state = UP;
+
+ /* Provide the correct kmalloc names now that the caches are up */
+ for (i = KMALLOC_SHIFT_LOW; i <= KMALLOC_SHIFT_HIGH; i++)
+ kmalloc_caches[i]. name =
+ kasprintf(GFP_KERNEL, "kmalloc-%d", 1 << i);
+
+#ifdef CONFIG_SMP
+ register_cpu_notifier(&slab_notifier);
+#endif
+
+ if (nr_cpu_ids) /* Remove when nr_cpu_ids is fixed upstream ! */
+ kmem_size = offsetof(struct kmem_cache, cpu_slab)
+ + nr_cpu_ids * sizeof(struct page *);
+
+ printk(KERN_INFO "SLUB: Genslabs=%d, HWalign=%d, Order=%d-%d, MinObjects=%d,"
+ " Processors=%d, Nodes=%d\n",
+ KMALLOC_SHIFT_HIGH, L1_CACHE_BYTES,
+ slub_min_order, slub_max_order, slub_min_objects,
+ nr_cpu_ids, nr_node_ids);
+}
+
+/*
+ * Find a mergeable slab cache
+ */
+static int slab_unmergeable(struct kmem_cache *s)
+{
+ if (slub_nomerge || (s->flags & SLUB_NEVER_MERGE))
+ return 1;
+
+ if (s->ctor || s->dtor)
+ return 1;
+
+ return 0;
+}
+
+static struct kmem_cache *find_mergeable(size_t size,
+ size_t align, unsigned long flags,
+ void (*ctor)(void *, struct kmem_cache *, unsigned long),
+ void (*dtor)(void *, struct kmem_cache *, unsigned long))
+{
+ struct list_head *h;
+
+ if (slub_nomerge || (flags & SLUB_NEVER_MERGE))
+ return NULL;
+
+ if (ctor || dtor)
+ return NULL;
+
+ size = ALIGN(size, sizeof(void *));
+ align = calculate_alignment(flags, align, size);
+ size = ALIGN(size, align);
+
+ list_for_each(h, &slab_caches) {
+ struct kmem_cache *s =
+ container_of(h, struct kmem_cache, list);
+
+ if (slab_unmergeable(s))
+ continue;
+
+ if (size > s->size)
+ continue;
+
+ if (((flags | slub_debug) & SLUB_MERGE_SAME) !=
+ (s->flags & SLUB_MERGE_SAME))
+ continue;
+ /*
+ * Check if alignment is compatible.
+ * Courtesy of Adrian Drzewiecki
+ */
+ if ((s->size & ~(align -1)) != s->size)
+ continue;
+
+ if (s->size - size >= sizeof(void *))
+ continue;
+
+ return s;
+ }
+ return NULL;
+}
+
+struct kmem_cache *kmem_cache_create(const char *name, size_t size,
+ size_t align, unsigned long flags,
+ void (*ctor)(void *, struct kmem_cache *, unsigned long),
+ void (*dtor)(void *, struct kmem_cache *, unsigned long))
+{
+ struct kmem_cache *s;
+
+ down_write(&slub_lock);
+ s = find_mergeable(size, align, flags, dtor, ctor);
+ if (s) {
+ s->refcount++;
+ /*
+ * Adjust the object sizes so that we clear
+ * the complete object on kzalloc.
+ */
+ s->objsize = max(s->objsize, (int)size);
+ s->inuse = max_t(int, s->inuse, ALIGN(size, sizeof(void *)));
+ if (sysfs_slab_alias(s, name))
+ goto err;
+ } else {
+ s = kmalloc(kmem_size, GFP_KERNEL);
+ if (s && kmem_cache_open(s, GFP_KERNEL, name,
+ size, align, flags, ctor, dtor)) {
+ if (sysfs_slab_add(s)) {
+ kfree(s);
+ goto err;
+ }
+ list_add(&s->list, &slab_caches);
+ } else
+ kfree(s);
+ }
+ up_write(&slub_lock);
+ return s;
+
+err:
+ up_write(&slub_lock);
+ if (flags & SLAB_PANIC)
+ panic("Cannot create slabcache %s\n", name);
+ else
+ s = NULL;
+ return s;
+}
+EXPORT_SYMBOL(kmem_cache_create);
+
+void *kmem_cache_zalloc(struct kmem_cache *s, gfp_t flags)
+{
+ void *x;
+
+ x = slab_alloc(s, flags, -1, __builtin_return_address(0));
+ if (x)
+ memset(x, 0, s->objsize);
+ return x;
+}
+EXPORT_SYMBOL(kmem_cache_zalloc);
+
+#ifdef CONFIG_SMP
+static void for_all_slabs(void (*func)(struct kmem_cache *, int), int cpu)
+{
+ struct list_head *h;
+
+ down_read(&slub_lock);
+ list_for_each(h, &slab_caches) {
+ struct kmem_cache *s =
+ container_of(h, struct kmem_cache, list);
+
+ func(s, cpu);
+ }
+ up_read(&slub_lock);
+}
+
+/*
+ * Use the cpu notifier to insure that the slab are flushed
+ * when necessary.
+ */
+static int __cpuinit slab_cpuup_callback(struct notifier_block *nfb,
+ unsigned long action, void *hcpu)
+{
+ long cpu = (long)hcpu;
+
+ switch (action) {
+ case CPU_UP_CANCELED:
+ case CPU_DEAD:
+ for_all_slabs(__flush_cpu_slab, cpu);
+ break;
+ default:
+ break;
+ }
+ return NOTIFY_OK;
+}
+
+static struct notifier_block __cpuinitdata slab_notifier =
+ { &slab_cpuup_callback, NULL, 0 };
+
+#endif
+
+#ifdef CONFIG_NUMA
+
+/*****************************************************************
+ * Generic reaper used to support the page allocator
+ * (the cpu slabs are reaped by a per slab workqueue).
+ *
+ * Maybe move this to the page allocator?
+ ****************************************************************/
+
+static DEFINE_PER_CPU(unsigned long, reap_node);
+
+static void init_reap_node(int cpu)
+{
+ int node;
+
+ node = next_node(cpu_to_node(cpu), node_online_map);
+ if (node == MAX_NUMNODES)
+ node = first_node(node_online_map);
+
+ __get_cpu_var(reap_node) = node;
+}
+
+static void next_reap_node(void)
+{
+ int node = __get_cpu_var(reap_node);
+
+ /*
+ * Also drain per cpu pages on remote zones
+ */
+ if (node != numa_node_id())
+ drain_node_pages(node);
+
+ node = next_node(node, node_online_map);
+ if (unlikely(node >= MAX_NUMNODES))
+ node = first_node(node_online_map);
+ __get_cpu_var(reap_node) = node;
+}
+#else
+#define init_reap_node(cpu) do { } while (0)
+#define next_reap_node(void) do { } while (0)
+#endif
+
+#define REAPTIMEOUT_CPUC (2*HZ)
+
+#ifdef CONFIG_SMP
+static DEFINE_PER_CPU(struct delayed_work, reap_work);
+
+static void cache_reap(struct work_struct *unused)
+{
+ next_reap_node();
+ refresh_cpu_vm_stats(smp_processor_id());
+ schedule_delayed_work(&__get_cpu_var(reap_work),
+ REAPTIMEOUT_CPUC);
+}
+
+static void __devinit start_cpu_timer(int cpu)
+{
+ struct delayed_work *reap_work = &per_cpu(reap_work, cpu);
+
+ /*
+ * When this gets called from do_initcalls via cpucache_init(),
+ * init_workqueues() has already run, so keventd will be setup
+ * at that time.
+ */
+ if (keventd_up() && reap_work->work.func == NULL) {
+ init_reap_node(cpu);
+ INIT_DELAYED_WORK(reap_work, cache_reap);
+ schedule_delayed_work_on(cpu, reap_work, HZ + 3 * cpu);
+ }
+}
+
+static int __init cpucache_init(void)
+{
+ int cpu;
+
+ /*
+ * Register the timers that drain pcp pages and update vm statistics
+ */
+ for_each_online_cpu(cpu)
+ start_cpu_timer(cpu);
+ return 0;
+}
+__initcall(cpucache_init);
+#endif
+
+#ifdef SLUB_RESILIENCY_TEST
+static unsigned long validate_slab_cache(struct kmem_cache *s);
+
+static void resiliency_test(void)
+{
+ u8 *p;
+
+ printk(KERN_ERR "SLUB resiliency testing\n");
+ printk(KERN_ERR "-----------------------\n");
+ printk(KERN_ERR "A. Corruption after allocation\n");
+
+ p = kzalloc(16, GFP_KERNEL);
+ p[16] = 0x12;
+ printk(KERN_ERR "\n1. kmalloc-16: Clobber Redzone/next pointer"
+ " 0x12->0x%p\n\n", p + 16);
+
+ validate_slab_cache(kmalloc_caches + 4);
+
+ /* Hmmm... The next two are dangerous */
+ p = kzalloc(32, GFP_KERNEL);
+ p[32 + sizeof(void *)] = 0x34;
+ printk(KERN_ERR "\n2. kmalloc-32: Clobber next pointer/next slab"
+ " 0x34 -> -0x%p\n", p);
+ printk(KERN_ERR "If allocated object is overwritten then not detectable\n\n");
+
+ validate_slab_cache(kmalloc_caches + 5);
+ p = kzalloc(64, GFP_KERNEL);
+ p += 64 + (get_cycles() & 0xff) * sizeof(void *);
+ *p = 0x56;
+ printk(KERN_ERR "\n3. kmalloc-64: corrupting random byte 0x56->0x%p\n",
+ p);
+ printk(KERN_ERR "If allocated object is overwritten then not detectable\n\n");
+ validate_slab_cache(kmalloc_caches + 6);
+
+ printk(KERN_ERR "\nB. Corruption after free\n");
+ p = kzalloc(128, GFP_KERNEL);
+ kfree(p);
+ *p = 0x78;
+ printk(KERN_ERR "1. kmalloc-128: Clobber first word 0x78->0x%p\n\n", p);
+ validate_slab_cache(kmalloc_caches + 7);
+
+ p = kzalloc(256, GFP_KERNEL);
+ kfree(p);
+ p[50] = 0x9a;
+ printk(KERN_ERR "\n2. kmalloc-256: Clobber 50th byte 0x9a->0x%p\n\n", p);
+ validate_slab_cache(kmalloc_caches + 8);
+
+ p = kzalloc(512, GFP_KERNEL);
+ kfree(p);
+ p[512] = 0xab;
+ printk(KERN_ERR "\n3. kmalloc-512: Clobber redzone 0xab->0x%p\n\n", p);
+ validate_slab_cache(kmalloc_caches + 9);
+}
+#else
+static void resiliency_test(void) {};
+#endif
+
+/*
+ * These are not as efficient as kmalloc for the non debug case.
+ * We do not have the page struct available so we have to touch one
+ * cacheline in struct kmem_cache to check slab flags.
+ */
+void *__kmalloc_track_caller(size_t size, gfp_t gfpflags, void *caller)
+{
+ struct kmem_cache *s = get_slab(size, gfpflags);
+
+ if (!s)
+ return NULL;
+
+ return slab_alloc(s, gfpflags, -1, caller);
+}
+
+void *__kmalloc_node_track_caller(size_t size, gfp_t gfpflags,
+ int node, void *caller)
+{
+ struct kmem_cache *s = get_slab(size, gfpflags);
+
+ if (!s)
+ return NULL;
+
+ return slab_alloc(s, gfpflags, node, caller);
+}
+
+#ifdef CONFIG_SYSFS
+
+static int validate_slab(struct kmem_cache *s, struct page *page)
+{
+ void *p;
+ void *addr = page_address(page);
+ unsigned long map[BITS_TO_LONGS(s->objects)];
+
+ if (!check_slab(s, page) ||
+ !on_freelist(s, page, NULL))
+ return 0;
+
+ /* Now we know that a valid freelist exists */
+ bitmap_zero(map, s->objects);
+
+ for(p = page->freelist; p; p = get_freepointer(s, p)) {
+ set_bit((p - addr) / s->size, map);
+ if (!check_object(s, page, p, 0))
+ return 0;
+ }
+
+ for(p = addr; p < addr + s->objects * s->size; p += s->size)
+ if (!test_bit((p - addr) / s->size, map))
+ if (!check_object(s, page, p, 1))
+ return 0;
+ return 1;
+}
+
+static void validate_slab_slab(struct kmem_cache *s, struct page *page)
+{
+ if (slab_trylock(page)) {
+ validate_slab(s, page);
+ slab_unlock(page);
+ } else
+ printk(KERN_INFO "SLUB %s: Skipped busy slab 0x%p\n",
+ s->name, page);
+
+ if (s->flags & DEBUG_DEFAULT_FLAGS) {
+ if (!PageError(page))
+ printk(KERN_ERR "SLUB %s: PageError not set "
+ "on slab 0x%p\n", s->name, page);
+ } else {
+ if (PageError(page))
+ printk(KERN_ERR "SLUB %s: PageError set on "
+ "slab 0x%p\n", s->name, page);
+ }
+}
+
+static int validate_slab_node(struct kmem_cache *s, struct kmem_cache_node *n)
+{
+ unsigned long count = 0;
+ struct page *page;
+ unsigned long flags;
+
+ spin_lock_irqsave(&n->list_lock, flags);
+
+ list_for_each_entry(page, &n->partial, lru) {
+ validate_slab_slab(s, page);
+ count++;
+ }
+ if (count != n->nr_partial)
+ printk(KERN_ERR "SLUB %s: %ld partial slabs counted but "
+ "counter=%ld\n", s->name, count, n->nr_partial);
+
+ if (!(s->flags & SLAB_STORE_USER))
+ goto out;
+
+ list_for_each_entry(page, &n->full, lru) {
+ validate_slab_slab(s, page);
+ count++;
+ }
+ if (count != atomic_long_read(&n->nr_slabs))
+ printk(KERN_ERR "SLUB: %s %ld slabs counted but "
+ "counter=%ld\n", s->name, count,
+ atomic_long_read(&n->nr_slabs));
+
+out:
+ spin_unlock_irqrestore(&n->list_lock, flags);
+ return count;
+}
+
+static unsigned long validate_slab_cache(struct kmem_cache *s)
+{
+ int node;
+ unsigned long count = 0;
+
+ flush_all(s);
+ for_each_online_node(node) {
+ struct kmem_cache_node *n = get_node(s, node);
+
+ count += validate_slab_node(s, n);
+ }
+ return count;
+}
+
+/*
+ * Generate lists of locations where slabcache objects are allocated
+ * and freed.
+ */
+
+struct location {
+ unsigned long count;
+ void *addr;
+};
+
+struct loc_track {
+ unsigned long max;
+ unsigned long count;
+ struct location *loc;
+};
+
+static void free_loc_track(struct loc_track *t)
+{
+ if (t->max)
+ free_pages((unsigned long)t->loc,
+ get_order(sizeof(struct location) * t->max));
+}
+
+static int alloc_loc_track(struct loc_track *t, unsigned long max)
+{
+ struct location *l;
+ int order;
+
+ if (!max)
+ max = PAGE_SIZE / sizeof(struct location);
+
+ order = get_order(sizeof(struct location) * max);
+
+ l = (void *)__get_free_pages(GFP_KERNEL, order);
+
+ if (!l)
+ return 0;
+
+ if (t->count) {
+ memcpy(l, t->loc, sizeof(struct location) * t->count);
+ free_loc_track(t);
+ }
+ t->max = max;
+ t->loc = l;
+ return 1;
+}
+
+static int add_location(struct loc_track *t, struct kmem_cache *s,
+ void *addr)
+{
+ long start, end, pos;
+ struct location *l;
+ void *caddr;
+
+ start = -1;
+ end = t->count;
+
+ for ( ; ; ) {
+ pos = start + (end - start + 1) / 2;
+
+ /*
+ * There is nothing at "end". If we end up there
+ * we need to add something to before end.
+ */
+ if (pos == end)
+ break;
+
+ caddr = t->loc[pos].addr;
+ if (addr == caddr) {
+ t->loc[pos].count++;
+ return 1;
+ }
+
+ if (addr < caddr)
+ end = pos;
+ else
+ start = pos;
+ }
+
+ /*
+ * Not found. Insert new tracking element
+ */
+ if (t->count >= t->max && !alloc_loc_track(t, 2 * t->max))
+ return 0;
+
+ l = t->loc + pos;
+ if (pos < t->count)
+ memmove(l + 1, l,
+ (t->count - pos) * sizeof(struct location));
+ t->count++;
+ l->count = 1;
+ l->addr = addr;
+ return 1;
+}
+
+static void process_slab(struct loc_track *t, struct kmem_cache *s,
+ struct page *page, enum track_item alloc)
+{
+ void *addr = page_address(page);
+ unsigned long map[BITS_TO_LONGS(s->objects)];
+ void *p;
+
+ bitmap_zero(map, s->objects);
+ for (p = page->freelist; p; p = get_freepointer(s, p))
+ set_bit((p - addr) / s->size, map);
+
+ for (p = addr; p < addr + s->objects * s->size; p += s->size)
+ if (!test_bit((p - addr) / s->size, map)) {
+ void *addr = get_track(s, p, alloc)->addr;
+
+ add_location(t, s, addr);
+ }
+}
+
+static int list_locations(struct kmem_cache *s, char *buf,
+ enum track_item alloc)
+{
+ int n = 0;
+ unsigned long i;
+ struct loc_track t;
+ int node;
+
+ t.count = 0;
+ t.max = 0;
+
+ /* Push back cpu slabs */
+ flush_all(s);
+
+ for_each_online_node(node) {
+ struct kmem_cache_node *n = get_node(s, node);
+ unsigned long flags;
+ struct page *page;
+
+ if (!atomic_read(&n->nr_slabs))
+ continue;
+
+ spin_lock_irqsave(&n->list_lock, flags);
+ list_for_each_entry(page, &n->partial, lru)
+ process_slab(&t, s, page, alloc);
+ list_for_each_entry(page, &n->full, lru)
+ process_slab(&t, s, page, alloc);
+ spin_unlock_irqrestore(&n->list_lock, flags);
+ }
+
+ for (i = 0; i < t.count; i++) {
+ void *addr = t.loc[i].addr;
+
+ if (n > PAGE_SIZE - 100)
+ break;
+ n += sprintf(buf + n, "%7ld ", t.loc[i].count);
+ if (addr)
+ n += sprint_symbol(buf + n, (unsigned long)t.loc[i].addr);
+ else
+ n += sprintf(buf + n, "<not-available>");
+ n += sprintf(buf + n, "\n");
+ }
+
+ free_loc_track(&t);
+ if (!t.count)
+ n += sprintf(buf, "No data\n");
+ return n;
+}
+
+static unsigned long count_partial(struct kmem_cache_node *n)
+{
+ unsigned long flags;
+ unsigned long x = 0;
+ struct page *page;
+
+ spin_lock_irqsave(&n->list_lock, flags);
+ list_for_each_entry(page, &n->partial, lru)
+ x += page->inuse;
+ spin_unlock_irqrestore(&n->list_lock, flags);
+ return x;
+}
+
+enum slab_stat_type {
+ SL_FULL,
+ SL_PARTIAL,
+ SL_CPU,
+ SL_OBJECTS
+};
+
+#define SO_FULL (1 << SL_FULL)
+#define SO_PARTIAL (1 << SL_PARTIAL)
+#define SO_CPU (1 << SL_CPU)
+#define SO_OBJECTS (1 << SL_OBJECTS)
+
+static unsigned long slab_objects(struct kmem_cache *s,
+ char *buf, unsigned long flags)
+{
+ unsigned long total = 0;
+ int cpu;
+ int node;
+ int x;
+ unsigned long *nodes;
+ unsigned long *per_cpu;
+
+ nodes = kzalloc(2 * sizeof(unsigned long) * nr_node_ids, GFP_KERNEL);
+ per_cpu = nodes + nr_node_ids;
+
+ for_each_possible_cpu(cpu) {
+ struct page *page = s->cpu_slab[cpu];
+ int node;
+
+ if (page) {
+ node = page_to_nid(page);
+ if (flags & SO_CPU) {
+ int x = 0;
+
+ if (flags & SO_OBJECTS)
+ x = page->inuse;
+ else
+ x = 1;
+ total += x;
+ nodes[node] += x;
+ }
+ per_cpu[node]++;
+ }
+ }
+
+ for_each_online_node(node) {
+ struct kmem_cache_node *n = get_node(s, node);
+
+ if (flags & SO_PARTIAL) {
+ if (flags & SO_OBJECTS)
+ x = count_partial(n);
+ else
+ x = n->nr_partial;
+ total += x;
+ nodes[node] += x;
+ }
+
+ if (flags & SO_FULL) {
+ int full_slabs = atomic_read(&n->nr_slabs)
+ - per_cpu[node]
+ - n->nr_partial;
+
+ if (flags & SO_OBJECTS)
+ x = full_slabs * s->objects;
+ else
+ x = full_slabs;
+ total += x;
+ nodes[node] += x;
+ }
+ }
+
+ x = sprintf(buf, "%lu", total);
+#ifdef CONFIG_NUMA
+ for_each_online_node(node)
+ if (nodes[node])
+ x += sprintf(buf + x, " N%d=%lu",
+ node, nodes[node]);
+#endif
+ kfree(nodes);
+ return x + sprintf(buf + x, "\n");
+}
+
+static int any_slab_objects(struct kmem_cache *s)
+{
+ int node;
+ int cpu;
+
+ for_each_possible_cpu(cpu)
+ if (s->cpu_slab[cpu])
+ return 1;
+
+ for_each_node(node) {
+ struct kmem_cache_node *n = get_node(s, node);
+
+ if (n->nr_partial || atomic_read(&n->nr_slabs))
+ return 1;
+ }
+ return 0;
+}
+
+#define to_slab_attr(n) container_of(n, struct slab_attribute, attr)
+#define to_slab(n) container_of(n, struct kmem_cache, kobj);
+
+struct slab_attribute {
+ struct attribute attr;
+ ssize_t (*show)(struct kmem_cache *s, char *buf);
+ ssize_t (*store)(struct kmem_cache *s, const char *x, size_t count);
+};
+
+#define SLAB_ATTR_RO(_name) \
+ static struct slab_attribute _name##_attr = __ATTR_RO(_name)
+
+#define SLAB_ATTR(_name) \
+ static struct slab_attribute _name##_attr = \
+ __ATTR(_name, 0644, _name##_show, _name##_store)
+
+static ssize_t slab_size_show(struct kmem_cache *s, char *buf)
+{
+ return sprintf(buf, "%d\n", s->size);
+}
+SLAB_ATTR_RO(slab_size);
+
+static ssize_t align_show(struct kmem_cache *s, char *buf)
+{
+ return sprintf(buf, "%d\n", s->align);
+}
+SLAB_ATTR_RO(align);
+
+static ssize_t object_size_show(struct kmem_cache *s, char *buf)
+{
+ return sprintf(buf, "%d\n", s->objsize);
+}
+SLAB_ATTR_RO(object_size);
+
+static ssize_t objs_per_slab_show(struct kmem_cache *s, char *buf)
+{
+ return sprintf(buf, "%d\n", s->objects);
+}
+SLAB_ATTR_RO(objs_per_slab);
+
+static ssize_t order_show(struct kmem_cache *s, char *buf)
+{
+ return sprintf(buf, "%d\n", s->order);
+}
+SLAB_ATTR_RO(order);
+
+static ssize_t ctor_show(struct kmem_cache *s, char *buf)
+{
+ if (s->ctor) {
+ int n = sprint_symbol(buf, (unsigned long)s->ctor);
+
+ return n + sprintf(buf + n, "\n");
+ }
+ return 0;
+}
+SLAB_ATTR_RO(ctor);
+
+static ssize_t dtor_show(struct kmem_cache *s, char *buf)
+{
+ if (s->dtor) {
+ int n = sprint_symbol(buf, (unsigned long)s->dtor);
+
+ return n + sprintf(buf + n, "\n");
+ }
+ return 0;
+}
+SLAB_ATTR_RO(dtor);
+
+static ssize_t aliases_show(struct kmem_cache *s, char *buf)
+{
+ return sprintf(buf, "%d\n", s->refcount - 1);
+}
+SLAB_ATTR_RO(aliases);
+
+static ssize_t slabs_show(struct kmem_cache *s, char *buf)
+{
+ return slab_objects(s, buf, SO_FULL|SO_PARTIAL|SO_CPU);
+}
+SLAB_ATTR_RO(slabs);
+
+static ssize_t partial_show(struct kmem_cache *s, char *buf)
+{
+ return slab_objects(s, buf, SO_PARTIAL);
+}
+SLAB_ATTR_RO(partial);
+
+static ssize_t cpu_slabs_show(struct kmem_cache *s, char *buf)
+{
+ return slab_objects(s, buf, SO_CPU);
+}
+SLAB_ATTR_RO(cpu_slabs);
+
+static ssize_t objects_show(struct kmem_cache *s, char *buf)
+{
+ return slab_objects(s, buf, SO_FULL|SO_PARTIAL|SO_CPU|SO_OBJECTS);
+}
+SLAB_ATTR_RO(objects);
+
+static ssize_t sanity_checks_show(struct kmem_cache *s, char *buf)
+{
+ return sprintf(buf, "%d\n", !!(s->flags & SLAB_DEBUG_FREE));
+}
+
+static ssize_t sanity_checks_store(struct kmem_cache *s,
+ const char *buf, size_t length)
+{
+ s->flags &= ~SLAB_DEBUG_FREE;
+ if (buf[0] == '1')
+ s->flags |= SLAB_DEBUG_FREE;
+ return length;
+}
+SLAB_ATTR(sanity_checks);
+
+static ssize_t trace_show(struct kmem_cache *s, char *buf)
+{
+ return sprintf(buf, "%d\n", !!(s->flags & SLAB_TRACE));
+}
+
+static ssize_t trace_store(struct kmem_cache *s, const char *buf,
+ size_t length)
+{
+ s->flags &= ~SLAB_TRACE;
+ if (buf[0] == '1')
+ s->flags |= SLAB_TRACE;
+ return length;
+}
+SLAB_ATTR(trace);
+
+static ssize_t reclaim_account_show(struct kmem_cache *s, char *buf)
+{
+ return sprintf(buf, "%d\n", !!(s->flags & SLAB_RECLAIM_ACCOUNT));
+}
+
+static ssize_t reclaim_account_store(struct kmem_cache *s,
+ const char *buf, size_t length)
+{
+ s->flags &= ~SLAB_RECLAIM_ACCOUNT;
+ if (buf[0] == '1')
+ s->flags |= SLAB_RECLAIM_ACCOUNT;
+ return length;
+}
+SLAB_ATTR(reclaim_account);
+
+static ssize_t hwcache_align_show(struct kmem_cache *s, char *buf)
+{
+ return sprintf(buf, "%d\n", !!(s->flags & SLAB_HWCACHE_ALIGN));
+}
+SLAB_ATTR_RO(hwcache_align);
+
+#ifdef CONFIG_ZONE_DMA
+static ssize_t cache_dma_show(struct kmem_cache *s, char *buf)
+{
+ return sprintf(buf, "%d\n", !!(s->flags & SLAB_CACHE_DMA));
+}
+SLAB_ATTR_RO(cache_dma);
+#endif
+
+static ssize_t destroy_by_rcu_show(struct kmem_cache *s, char *buf)
+{
+ return sprintf(buf, "%d\n", !!(s->flags & SLAB_DESTROY_BY_RCU));
+}
+SLAB_ATTR_RO(destroy_by_rcu);
+
+static ssize_t red_zone_show(struct kmem_cache *s, char *buf)
+{
+ return sprintf(buf, "%d\n", !!(s->flags & SLAB_RED_ZONE));
+}
+
+static ssize_t red_zone_store(struct kmem_cache *s,
+ const char *buf, size_t length)
+{
+ if (any_slab_objects(s))
+ return -EBUSY;
+
+ s->flags &= ~SLAB_RED_ZONE;
+ if (buf[0] == '1')
+ s->flags |= SLAB_RED_ZONE;
+ calculate_sizes(s);
+ return length;
+}
+SLAB_ATTR(red_zone);
+
+static ssize_t poison_show(struct kmem_cache *s, char *buf)
+{
+ return sprintf(buf, "%d\n", !!(s->flags & SLAB_POISON));
+}
+
+static ssize_t poison_store(struct kmem_cache *s,
+ const char *buf, size_t length)
+{
+ if (any_slab_objects(s))
+ return -EBUSY;
+
+ s->flags &= ~SLAB_POISON;
+ if (buf[0] == '1')
+ s->flags |= SLAB_POISON;
+ calculate_sizes(s);
+ return length;
+}
+SLAB_ATTR(poison);
+
+static ssize_t store_user_show(struct kmem_cache *s, char *buf)
+{
+ return sprintf(buf, "%d\n", !!(s->flags & SLAB_STORE_USER));
+}
+
+static ssize_t store_user_store(struct kmem_cache *s,
+ const char *buf, size_t length)
+{
+ if (any_slab_objects(s))
+ return -EBUSY;
+
+ s->flags &= ~SLAB_STORE_USER;
+ if (buf[0] == '1')
+ s->flags |= SLAB_STORE_USER;
+ calculate_sizes(s);
+ return length;
+}
+SLAB_ATTR(store_user);
+
+static ssize_t validate_show(struct kmem_cache *s, char *buf)
+{
+ return 0;
+}
+
+static ssize_t validate_store(struct kmem_cache *s,
+ const char *buf, size_t length)
+{
+ if (buf[0] == '1')
+ validate_slab_cache(s);
+ else
+ return -EINVAL;
+ return length;
+}
+SLAB_ATTR(validate);
+
+static ssize_t shrink_show(struct kmem_cache *s, char *buf)
+{
+ return 0;
+}
+
+static ssize_t shrink_store(struct kmem_cache *s,
+ const char *buf, size_t length)
+{
+ if (buf[0] == '1') {
+ int rc = kmem_cache_shrink(s);
+
+ if (rc)
+ return rc;
+ } else
+ return -EINVAL;
+ return length;
+}
+SLAB_ATTR(shrink);
+
+static ssize_t alloc_calls_show(struct kmem_cache *s, char *buf)
+{
+ if (!(s->flags & SLAB_STORE_USER))
+ return -ENOSYS;
+ return list_locations(s, buf, TRACK_ALLOC);
+}
+SLAB_ATTR_RO(alloc_calls);
+
+static ssize_t free_calls_show(struct kmem_cache *s, char *buf)
+{
+ if (!(s->flags & SLAB_STORE_USER))
+ return -ENOSYS;
+ return list_locations(s, buf, TRACK_FREE);
+}
+SLAB_ATTR_RO(free_calls);
+
+#ifdef CONFIG_NUMA
+static ssize_t defrag_ratio_show(struct kmem_cache *s, char *buf)
+{
+ return sprintf(buf, "%d\n", s->defrag_ratio / 10);
+}
+
+static ssize_t defrag_ratio_store(struct kmem_cache *s,
+ const char *buf, size_t length)
+{
+ int n = simple_strtoul(buf, NULL, 10);
+
+ if (n < 100)
+ s->defrag_ratio = n * 10;
+ return length;
+}
+SLAB_ATTR(defrag_ratio);
+#endif
+
+static struct attribute * slab_attrs[] = {
+ &slab_size_attr.attr,
+ &object_size_attr.attr,
+ &objs_per_slab_attr.attr,
+ &order_attr.attr,
+ &objects_attr.attr,
+ &slabs_attr.attr,
+ &partial_attr.attr,
+ &cpu_slabs_attr.attr,
+ &ctor_attr.attr,
+ &dtor_attr.attr,
+ &aliases_attr.attr,
+ &align_attr.attr,
+ &sanity_checks_attr.attr,
+ &trace_attr.attr,
+ &hwcache_align_attr.attr,
+ &reclaim_account_attr.attr,
+ &destroy_by_rcu_attr.attr,
+ &red_zone_attr.attr,
+ &poison_attr.attr,
+ &store_user_attr.attr,
+ &validate_attr.attr,
+ &shrink_attr.attr,
+ &alloc_calls_attr.attr,
+ &free_calls_attr.attr,
+#ifdef CONFIG_ZONE_DMA
+ &cache_dma_attr.attr,
+#endif
+#ifdef CONFIG_NUMA
+ &defrag_ratio_attr.attr,
+#endif
+ NULL
+};
+
+static struct attribute_group slab_attr_group = {
+ .attrs = slab_attrs,
+};
+
+static ssize_t slab_attr_show(struct kobject *kobj,
+ struct attribute *attr,
+ char *buf)
+{
+ struct slab_attribute *attribute;
+ struct kmem_cache *s;
+ int err;
+
+ attribute = to_slab_attr(attr);
+ s = to_slab(kobj);
+
+ if (!attribute->show)
+ return -EIO;
+
+ err = attribute->show(s, buf);
+
+ return err;
+}
+
+static ssize_t slab_attr_store(struct kobject *kobj,
+ struct attribute *attr,
+ const char *buf, size_t len)
+{
+ struct slab_attribute *attribute;
+ struct kmem_cache *s;
+ int err;
+
+ attribute = to_slab_attr(attr);
+ s = to_slab(kobj);
+
+ if (!attribute->store)
+ return -EIO;
+
+ err = attribute->store(s, buf, len);
+
+ return err;
+}
+
+static struct sysfs_ops slab_sysfs_ops = {
+ .show = slab_attr_show,
+ .store = slab_attr_store,
+};
+
+static struct kobj_type slab_ktype = {
+ .sysfs_ops = &slab_sysfs_ops,
+};
+
+static int uevent_filter(struct kset *kset, struct kobject *kobj)
+{
+ struct kobj_type *ktype = get_ktype(kobj);
+
+ if (ktype == &slab_ktype)
+ return 1;
+ return 0;
+}
+
+static struct kset_uevent_ops slab_uevent_ops = {
+ .filter = uevent_filter,
+};
+
+decl_subsys(slab, &slab_ktype, &slab_uevent_ops);
+
+#define ID_STR_LENGTH 64
+
+/* Create a unique string id for a slab cache:
+ * format
+ * :[flags-]size:[memory address of kmemcache]
+ */
+static char *create_unique_id(struct kmem_cache *s)
+{
+ char *name = kmalloc(ID_STR_LENGTH, GFP_KERNEL);
+ char *p = name;
+
+ BUG_ON(!name);
+
+ *p++ = ':';
+ /*
+ * First flags affecting slabcache operations. We will only
+ * get here for aliasable slabs so we do not need to support
+ * too many flags. The flags here must cover all flags that
+ * are matched during merging to guarantee that the id is
+ * unique.
+ */
+ if (s->flags & SLAB_CACHE_DMA)
+ *p++ = 'd';
+ if (s->flags & SLAB_RECLAIM_ACCOUNT)
+ *p++ = 'a';
+ if (s->flags & SLAB_DEBUG_FREE)
+ *p++ = 'F';
+ if (p != name + 1)
+ *p++ = '-';
+ p += sprintf(p, "%07d", s->size);
+ BUG_ON(p > name + ID_STR_LENGTH - 1);
+ return name;
+}
+
+static int sysfs_slab_add(struct kmem_cache *s)
+{
+ int err;
+ const char *name;
+ int unmergeable;
+
+ if (slab_state < SYSFS)
+ /* Defer until later */
+ return 0;
+
+ unmergeable = slab_unmergeable(s);
+ if (unmergeable) {
+ /*
+ * Slabcache can never be merged so we can use the name proper.
+ * This is typically the case for debug situations. In that
+ * case we can catch duplicate names easily.
+ */
+ sysfs_remove_link(&slab_subsys.kset.kobj, s->name);
+ name = s->name;
+ } else {
+ /*
+ * Create a unique name for the slab as a target
+ * for the symlinks.
+ */
+ name = create_unique_id(s);
+ }
+
+ kobj_set_kset_s(s, slab_subsys);
+ kobject_set_name(&s->kobj, name);
+ kobject_init(&s->kobj);
+ err = kobject_add(&s->kobj);
+ if (err)
+ return err;
+
+ err = sysfs_create_group(&s->kobj, &slab_attr_group);
+ if (err)
+ return err;
+ kobject_uevent(&s->kobj, KOBJ_ADD);
+ if (!unmergeable) {
+ /* Setup first alias */
+ sysfs_slab_alias(s, s->name);
+ kfree(name);
+ }
+ return 0;
+}
+
+static void sysfs_slab_remove(struct kmem_cache *s)
+{
+ kobject_uevent(&s->kobj, KOBJ_REMOVE);
+ kobject_del(&s->kobj);
+}
+
+/*
+ * Need to buffer aliases during bootup until sysfs becomes
+ * available lest we loose that information.
+ */
+struct saved_alias {
+ struct kmem_cache *s;
+ const char *name;
+ struct saved_alias *next;
+};
+
+struct saved_alias *alias_list;
+
+static int sysfs_slab_alias(struct kmem_cache *s, const char *name)
+{
+ struct saved_alias *al;
+
+ if (slab_state == SYSFS) {
+ /*
+ * If we have a leftover link then remove it.
+ */
+ sysfs_remove_link(&slab_subsys.kset.kobj, name);
+ return sysfs_create_link(&slab_subsys.kset.kobj,
+ &s->kobj, name);
+ }
+
+ al = kmalloc(sizeof(struct saved_alias), GFP_KERNEL);
+ if (!al)
+ return -ENOMEM;
+
+ al->s = s;
+ al->name = name;
+ al->next = alias_list;
+ alias_list = al;
+ return 0;
+}
+
+static int __init slab_sysfs_init(void)
+{
+ int err;
+
+ err = subsystem_register(&slab_subsys);
+ if (err) {
+ printk(KERN_ERR "Cannot register slab subsystem.\n");
+ return -ENOSYS;
+ }
+
+ finish_bootstrap();
+
+ while (alias_list) {
+ struct saved_alias *al = alias_list;
+
+ alias_list = alias_list->next;
+ err = sysfs_slab_alias(al->s, al->name);
+ BUG_ON(err);
+ kfree(al);
+ }
+
+ resiliency_test();
+ return 0;
+}
+
+__initcall(slab_sysfs_init);
+#else
+__initcall(finish_bootstrap);
+#endif
diff --git a/mm/swap.c b/mm/swap.c
index 2ed7be3..218c52a 100644
--- a/mm/swap.c
+++ b/mm/swap.c
@@ -55,7 +55,7 @@
static void put_compound_page(struct page *page)
{
- page = (struct page *)page_private(page);
+ page = compound_head(page);
if (put_page_testzero(page)) {
compound_page_dtor *dtor;
diff --git a/mm/swapfile.c b/mm/swapfile.c
index a2d9bb4..acc172c 100644
--- a/mm/swapfile.c
+++ b/mm/swapfile.c
@@ -1531,9 +1531,6 @@
error = PTR_ERR(page);
goto bad_swap;
}
- wait_on_page_locked(page);
- if (!PageUptodate(page))
- goto bad_swap;
kmap(page);
swap_header = page_address(page);
diff --git a/mm/vmscan.c b/mm/vmscan.c
index db023e2..56651a1 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -1323,8 +1323,6 @@
for ( ; ; ) {
unsigned long new_order;
- try_to_freeze();
-
prepare_to_wait(&pgdat->kswapd_wait, &wait, TASK_INTERRUPTIBLE);
new_order = pgdat->kswapd_max_order;
pgdat->kswapd_max_order = 0;
@@ -1335,12 +1333,19 @@
*/
order = new_order;
} else {
- schedule();
+ if (!freezing(current))
+ schedule();
+
order = pgdat->kswapd_max_order;
}
finish_wait(&pgdat->kswapd_wait, &wait);
- balance_pgdat(pgdat, order);
+ if (!try_to_freeze()) {
+ /* We can speed up thawing tasks if we don't call
+ * balance_pgdat after returning from the refrigerator
+ */
+ balance_pgdat(pgdat, order);
+ }
}
return 0;
}
diff --git a/net/socket.c b/net/socket.c
index 1ad62c0..759825b 100644
--- a/net/socket.c
+++ b/net/socket.c
@@ -261,8 +261,7 @@
{
struct socket_alloc *ei = (struct socket_alloc *)foo;
- if ((flags & (SLAB_CTOR_VERIFY|SLAB_CTOR_CONSTRUCTOR))
- == SLAB_CTOR_CONSTRUCTOR)
+ if (flags & SLAB_CTOR_CONSTRUCTOR)
inode_init_once(&ei->vfs_inode);
}
diff --git a/net/sunrpc/rpc_pipe.c b/net/sunrpc/rpc_pipe.c
index 9b9ea50..ad39b47 100644
--- a/net/sunrpc/rpc_pipe.c
+++ b/net/sunrpc/rpc_pipe.c
@@ -828,8 +828,7 @@
{
struct rpc_inode *rpci = (struct rpc_inode *) foo;
- if ((flags & (SLAB_CTOR_VERIFY|SLAB_CTOR_CONSTRUCTOR)) ==
- SLAB_CTOR_CONSTRUCTOR) {
+ if (flags & SLAB_CTOR_CONSTRUCTOR) {
inode_init_once(&rpci->vfs_inode);
rpci->private = NULL;
rpci->nreaders = 0;
diff --git a/scripts/genksyms/genksyms.c b/scripts/genksyms/genksyms.c
index b038182..511023b 100644
--- a/scripts/genksyms/genksyms.c
+++ b/scripts/genksyms/genksyms.c
@@ -516,7 +516,8 @@
genksyms_usage();
return 1;
}
- if ((strcmp(arch, "v850") == 0) || (strcmp(arch, "h8300") == 0))
+ if ((strcmp(arch, "v850") == 0) || (strcmp(arch, "h8300") == 0)
+ || (strcmp(arch, "blackfin") == 0))
mod_prefix = "_";
{
extern int yydebug;
diff --git a/scripts/mod/mk_elfconfig.c b/scripts/mod/mk_elfconfig.c
index 725d61c..db3881f 100644
--- a/scripts/mod/mk_elfconfig.c
+++ b/scripts/mod/mk_elfconfig.c
@@ -55,7 +55,8 @@
else
exit(1);
- if ((strcmp(argv[1], "v850") == 0) || (strcmp(argv[1], "h8300") == 0))
+ if ((strcmp(argv[1], "v850") == 0) || (strcmp(argv[1], "h8300") == 0)
+ || (strcmp(argv[1], "blackfin") == 0))
printf("#define MODULE_SYMBOL_PREFIX \"_\"\n");
else
printf("#define MODULE_SYMBOL_PREFIX \"\"\n");