diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 4516d62..e07f12a 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -2274,8 +2274,7 @@
 				ARRAY_SIZE(phba->msix_entries));
 	if (rc) {
 		lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
-				"0420 Enable MSI-X failed (%d), continuing "
-				"with MSI\n", rc);
+				"0420 PCI enable MSI-X failed (%d)\n", rc);
 		goto msi_fail_out;
 	} else
 		for (i = 0; i < LPFC_MSIX_VECTORS; i++)
@@ -2292,9 +2291,9 @@
 	rc = request_irq(phba->msix_entries[0].vector, &lpfc_sp_intr_handler,
 			 IRQF_SHARED, LPFC_SP_DRIVER_HANDLER_NAME, phba);
 	if (rc) {
-		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+		lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
 				"0421 MSI-X slow-path request_irq failed "
-				"(%d), continuing with MSI\n", rc);
+				"(%d)\n", rc);
 		goto msi_fail_out;
 	}
 
@@ -2303,9 +2302,9 @@
 			 IRQF_SHARED, LPFC_FP_DRIVER_HANDLER_NAME, phba);
 
 	if (rc) {
-		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+		lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
 				"0429 MSI-X fast-path request_irq failed "
-				"(%d), continuing with MSI\n", rc);
+				"(%d)\n", rc);
 		goto irq_fail_out;
 	}
 
@@ -2326,7 +2325,7 @@
 		goto mbx_fail_out;
 	rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL);
 	if (rc != MBX_SUCCESS) {
-		lpfc_printf_log(phba, KERN_ERR, LOG_MBOX,
+		lpfc_printf_log(phba, KERN_WARNING, LOG_MBOX,
 				"0351 Config MSI mailbox command failed, "
 				"mbxCmd x%x, mbxStatus x%x\n",
 				pmb->mb.mbxCommand, pmb->mb.mbxStatus);
@@ -2375,6 +2374,195 @@
 }
 
 /**
+ * lpfc_enable_msi: Enable MSI interrupt mode.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to enable the MSI interrupt mode. The kernel
+ * function pci_enable_msi() is called to enable the MSI vector. The
+ * device driver is responsible for calling the request_irq() to register
+ * MSI vector with a interrupt the handler, which is done in this function.
+ *
+ * Return codes
+ * 	0 - sucessful
+ * 	other values - error
+ */
+static int
+lpfc_enable_msi(struct lpfc_hba *phba)
+{
+	int rc;
+
+	rc = pci_enable_msi(phba->pcidev);
+	if (!rc)
+		lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+				"0462 PCI enable MSI mode success.\n");
+	else {
+		lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+				"0471 PCI enable MSI mode failed (%d)\n", rc);
+		return rc;
+	}
+
+	rc = request_irq(phba->pcidev->irq, lpfc_intr_handler,
+			 IRQF_SHARED, LPFC_DRIVER_NAME, phba);
+	if (rc) {
+		pci_disable_msi(phba->pcidev);
+		lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
+				"0478 MSI request_irq failed (%d)\n", rc);
+	}
+	return rc;
+}
+
+/**
+ * lpfc_disable_msi: Disable MSI interrupt mode.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to disable the MSI interrupt mode. The driver
+ * calls free_irq() on MSI vector it has done request_irq() on before
+ * calling pci_disable_msi(). Failure to do so results in a BUG_ON() and
+ * a device will be left with MSI enabled and leaks its vector.
+ */
+
+static void
+lpfc_disable_msi(struct lpfc_hba *phba)
+{
+	free_irq(phba->pcidev->irq, phba);
+	pci_disable_msi(phba->pcidev);
+	return;
+}
+
+/**
+ * lpfc_log_intr_mode: Log the active interrupt mode
+ * @phba: pointer to lpfc hba data structure.
+ * @intr_mode: active interrupt mode adopted.
+ *
+ * This routine it invoked to log the currently used active interrupt mode
+ * to the device.
+ */
+static void
+lpfc_log_intr_mode(struct lpfc_hba *phba, uint32_t intr_mode)
+{
+	switch (intr_mode) {
+	case 0:
+		lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+				"0470 Enable INTx interrupt mode.\n");
+		break;
+	case 1:
+		lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+				"0481 Enabled MSI interrupt mode.\n");
+		break;
+	case 2:
+		lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+				"0480 Enabled MSI-X interrupt mode.\n");
+		break;
+	default:
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0482 Illegal interrupt mode.\n");
+		break;
+	}
+	return;
+}
+
+static void
+lpfc_stop_port(struct lpfc_hba *phba)
+{
+	/* Clear all interrupt enable conditions */
+	writel(0, phba->HCregaddr);
+	readl(phba->HCregaddr); /* flush */
+	/* Clear all pending interrupts */
+	writel(0xffffffff, phba->HAregaddr);
+	readl(phba->HAregaddr); /* flush */
+
+	/* Reset some HBA SLI setup states */
+	lpfc_stop_phba_timers(phba);
+	phba->pport->work_port_events = 0;
+
+	return;
+}
+
+/**
+ * lpfc_enable_intr: Enable device interrupt.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to enable device interrupt and associate driver's
+ * interrupt handler(s) to interrupt vector(s). Depends on the interrupt
+ * mode configured to the driver, the driver will try to fallback from the
+ * configured interrupt mode to an interrupt mode which is supported by the
+ * platform, kernel, and device in the order of: MSI-X -> MSI -> IRQ.
+ *
+ * Return codes
+ *   0 - sucessful
+ *   other values - error
+ **/
+static uint32_t
+lpfc_enable_intr(struct lpfc_hba *phba, uint32_t cfg_mode)
+{
+	uint32_t intr_mode = LPFC_INTR_ERROR;
+	int retval;
+
+	if (cfg_mode == 2) {
+		/* Need to issue conf_port mbox cmd before conf_msi mbox cmd */
+		retval = lpfc_sli_config_port(phba, 3);
+		if (!retval) {
+			/* Now, try to enable MSI-X interrupt mode */
+			retval = lpfc_enable_msix(phba);
+			if (!retval) {
+				/* Indicate initialization to MSI-X mode */
+				phba->intr_type = MSIX;
+				intr_mode = 2;
+			}
+		}
+	}
+
+	/* Fallback to MSI if MSI-X initialization failed */
+	if (cfg_mode >= 1 && phba->intr_type == NONE) {
+		retval = lpfc_enable_msi(phba);
+		if (!retval) {
+			/* Indicate initialization to MSI mode */
+			phba->intr_type = MSI;
+			intr_mode = 1;
+		}
+	}
+
+	/* Fallback to INTx if both MSI-X/MSI initalization failed */
+	if (phba->intr_type == NONE) {
+		retval = request_irq(phba->pcidev->irq, lpfc_intr_handler,
+				     IRQF_SHARED, LPFC_DRIVER_NAME, phba);
+		if (!retval) {
+			/* Indicate initialization to INTx mode */
+			phba->intr_type = INTx;
+			intr_mode = 0;
+		}
+	}
+	return intr_mode;
+}
+
+/**
+ * lpfc_disable_intr: Disable device interrupt.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to disable device interrupt and disassociate the
+ * driver's interrupt handler(s) from interrupt vector(s). Depending on the
+ * interrupt mode, the driver will release the interrupt vector(s) for the
+ * message signaled interrupt.
+ **/
+static void
+lpfc_disable_intr(struct lpfc_hba *phba)
+{
+	/* Disable the currently initialized interrupt mode */
+	if (phba->intr_type == MSIX)
+		lpfc_disable_msix(phba);
+	else if (phba->intr_type == MSI)
+		lpfc_disable_msi(phba);
+	else if (phba->intr_type == INTx)
+		free_irq(phba->pcidev->irq, phba);
+
+	/* Reset interrupt management states */
+	phba->intr_type = NONE;
+	phba->sli.slistat.sli_intr = 0;
+
+	return;
+}
+
+/**
  * lpfc_pci_probe_one: lpfc PCI probe func to register device to PCI subsystem.
  * @pdev: pointer to PCI device
  * @pid: pointer to PCI device identifier
@@ -2404,6 +2592,7 @@
 	int error = -ENODEV, retval;
 	int  i, hbq_count;
 	uint16_t iotag;
+	uint32_t cfg_mode, intr_mode;
 	int bars = pci_select_bars(pdev, IORESOURCE_MEM);
 	struct lpfc_adapter_event_header adapter_event;
 
@@ -2606,7 +2795,6 @@
 	lpfc_debugfs_initialize(vport);
 
 	pci_set_drvdata(pdev, shost);
-	phba->intr_type = NONE;
 
 	phba->MBslimaddr = phba->slim_memmap_p;
 	phba->HAregaddr = phba->ctrl_regs_memmap_p + HA_REG_OFFSET;
@@ -2614,63 +2802,58 @@
 	phba->HSregaddr = phba->ctrl_regs_memmap_p + HS_REG_OFFSET;
 	phba->HCregaddr = phba->ctrl_regs_memmap_p + HC_REG_OFFSET;
 
-	/* Configure and enable interrupt */
-	if (phba->cfg_use_msi == 2) {
-		/* Need to issue conf_port mbox cmd before conf_msi mbox cmd */
-		error = lpfc_sli_config_port(phba, 3);
-		if (error)
-			lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
-				"0427 Firmware not capable of SLI 3 mode.\n");
-		else {
-			lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
-				"0426 Firmware capable of SLI 3 mode.\n");
-			/* Now, try to enable MSI-X interrupt mode */
-			error = lpfc_enable_msix(phba);
-			if (!error) {
-				phba->intr_type = MSIX;
-				lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
-						"0430 enable MSI-X mode.\n");
-			}
-		}
-	}
-
-	/* Fallback to MSI if MSI-X initialization failed */
-	if (phba->cfg_use_msi >= 1 && phba->intr_type == NONE) {
-		retval = pci_enable_msi(phba->pcidev);
-		if (!retval) {
-			phba->intr_type = MSI;
-			lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
-					"0473 enable MSI mode.\n");
-		} else
-			lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
-					"0452 enable IRQ mode.\n");
-	}
-
-	/* MSI-X is the only case the doesn't need to call request_irq */
-	if (phba->intr_type != MSIX) {
-		retval = request_irq(phba->pcidev->irq, lpfc_intr_handler,
-				     IRQF_SHARED, LPFC_DRIVER_NAME, phba);
-		if (retval) {
-			lpfc_printf_log(phba, KERN_ERR, LOG_INIT, "0451 Enable "
-					"interrupt handler failed\n");
-			error = retval;
-			goto out_disable_msi;
-		} else if (phba->intr_type != MSI)
-			phba->intr_type = INTx;
-	}
-
+	/* Configure sysfs attributes */
 	if (lpfc_alloc_sysfs_attr(vport)) {
 		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
 				"1476 Failed to allocate sysfs attr\n");
 		error = -ENOMEM;
-		goto out_free_irq;
+		goto out_destroy_port;
 	}
 
-	if (lpfc_sli_hba_setup(phba)) {
-		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
-				"1477 Failed to set up hba\n");
-		error = -ENODEV;
-		goto out_remove_device;
+	cfg_mode = phba->cfg_use_msi;
+	while (true) {
+		/* Configure and enable interrupt */
+		intr_mode = lpfc_enable_intr(phba, cfg_mode);
+		if (intr_mode == LPFC_INTR_ERROR) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+					"0426 Failed to enable interrupt.\n");
+			goto out_free_sysfs_attr;
+		}
+		/* HBA SLI setup */
+		if (lpfc_sli_hba_setup(phba)) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+					"1477 Failed to set up hba\n");
+			error = -ENODEV;
+			goto out_remove_device;
+		}
+
+		/* Wait 50ms for the interrupts of previous mailbox commands */
+		msleep(50);
+		/* Check active interrupts received */
+		if (phba->sli.slistat.sli_intr > LPFC_MSIX_VECTORS) {
+			/* Log the current active interrupt mode */
+			phba->intr_mode = intr_mode;
+			lpfc_log_intr_mode(phba, intr_mode);
+			break;
+		} else {
+			lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+					"0451 Configure interrupt mode (%d) "
+					"failed active interrupt test.\n",
+					intr_mode);
+			if (intr_mode == 0) {
+				lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+						"0479 Failed to enable "
+						"interrupt.\n");
+				error = -ENODEV;
+				goto out_remove_device;
+			}
+			/* Stop HBA SLI setups */
+			lpfc_stop_port(phba);
+			/* Disable the current interrupt mode */
+			lpfc_disable_intr(phba);
+			/* Try next level of interrupt mode */
+			cfg_mode = --intr_mode;
+		}
 	}
 
 	/*
@@ -2700,22 +2883,15 @@
 	return 0;
 
 out_remove_device:
-	lpfc_free_sysfs_attr(vport);
 	spin_lock_irq(shost->host_lock);
 	vport->load_flag |= FC_UNLOADING;
 	spin_unlock_irq(shost->host_lock);
-out_free_irq:
 	lpfc_stop_phba_timers(phba);
 	phba->pport->work_port_events = 0;
-
-	if (phba->intr_type == MSIX)
-		lpfc_disable_msix(phba);
-	else
-		free_irq(phba->pcidev->irq, phba);
-
-out_disable_msi:
-	if (phba->intr_type == MSI)
-		pci_disable_msi(phba->pcidev);
+	lpfc_disable_intr(phba);
+out_free_sysfs_attr:
+	lpfc_free_sysfs_attr(vport);
+out_destroy_port:
 	destroy_port(vport);
 out_kthread_stop:
 	kthread_stop(phba->worker_thread);
@@ -2804,13 +2980,8 @@
 
 	lpfc_debugfs_terminate(vport);
 
-	if (phba->intr_type == MSIX)
-		lpfc_disable_msix(phba);
-	else {
-		free_irq(phba->pcidev->irq, phba);
-		if (phba->intr_type == MSI)
-			pci_disable_msi(phba->pcidev);
-	}
+	/* Disable interrupt */
+	lpfc_disable_intr(phba);
 
 	pci_set_drvdata(pdev, NULL);
 	scsi_host_put(shost);
@@ -2908,6 +3079,7 @@
 {
 	struct Scsi_Host *shost = pci_get_drvdata(pdev);
 	struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
+	uint32_t intr_mode;
 	int error;
 
 	lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
@@ -2930,19 +3102,22 @@
 		return error;
 	}
 
-	/* Enable interrupt from device */
-	error = lpfc_enable_intr(phba);
-	if (error) {
+	/* Configure and enable interrupt */
+	intr_mode = lpfc_enable_intr(phba, phba->intr_mode);
+	if (intr_mode == LPFC_INTR_ERROR) {
 		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
-				"0430 PM resume Failed to enable interrupt: "
-				"error=x%x.\n", error);
-		return error;
-	}
+				"0430 PM resume Failed to enable interrupt\n");
+		return -EIO;
+	} else
+		phba->intr_mode = intr_mode;
 
 	/* Restart HBA and bring it online */
 	lpfc_sli_brdrestart(phba);
 	lpfc_online(phba);
 
+	/* Log the current active interrupt mode */
+	lpfc_log_intr_mode(phba, phba->intr_mode);
+
 	return 0;
 }
 
@@ -2989,13 +3164,8 @@
 	pring = &psli->ring[psli->fcp_ring];
 	lpfc_sli_abort_iocb_ring(phba, pring);
 
-	if (phba->intr_type == MSIX)
-		lpfc_disable_msix(phba);
-	else {
-		free_irq(phba->pcidev->irq, phba);
-		if (phba->intr_type == MSI)
-			pci_disable_msi(phba->pcidev);
-	}
+	/* Disable interrupt */
+	lpfc_disable_intr(phba);
 
 	/* Request a slot reset. */
 	return PCI_ERS_RESULT_NEED_RESET;
@@ -3023,7 +3193,7 @@
 	struct Scsi_Host *shost = pci_get_drvdata(pdev);
 	struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
 	struct lpfc_sli *psli = &phba->sli;
-	int error, retval;
+	uint32_t intr_mode;
 
 	dev_printk(KERN_INFO, &pdev->dev, "recovering from a slot reset.\n");
 	if (pci_enable_device_mem(pdev)) {
@@ -3040,55 +3210,23 @@
 	psli->sli_flag &= ~LPFC_SLI2_ACTIVE;
 	spin_unlock_irq(&phba->hbalock);
 
-	/* Enable configured interrupt method */
-	phba->intr_type = NONE;
-	if (phba->cfg_use_msi == 2) {
-		/* Need to issue conf_port mbox cmd before conf_msi mbox cmd */
-		error = lpfc_sli_config_port(phba, 3);
-		if (error)
-			lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
-				"0478 Firmware not capable of SLI 3 mode.\n");
-		else {
-			lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
-				"0479 Firmware capable of SLI 3 mode.\n");
-			/* Now, try to enable MSI-X interrupt mode */
-			error = lpfc_enable_msix(phba);
-			if (!error) {
-				phba->intr_type = MSIX;
-				lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
-						"0480 enable MSI-X mode.\n");
-			}
-		}
-	}
-
-	/* Fallback to MSI if MSI-X initialization failed */
-	if (phba->cfg_use_msi >= 1 && phba->intr_type == NONE) {
-		retval = pci_enable_msi(phba->pcidev);
-		if (!retval) {
-			phba->intr_type = MSI;
-			lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
-					"0481 enable MSI mode.\n");
-		} else
-			lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
-					"0470 enable IRQ mode.\n");
-	}
-
-	/* MSI-X is the only case the doesn't need to call request_irq */
-	if (phba->intr_type != MSIX) {
-		retval = request_irq(phba->pcidev->irq, lpfc_intr_handler,
-				     IRQF_SHARED, LPFC_DRIVER_NAME, phba);
-		if (retval) {
-			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
-					"0471 Enable interrupt handler "
-					"failed\n");
-		} else if (phba->intr_type != MSI)
-			phba->intr_type = INTx;
-	}
+	/* Configure and enable interrupt */
+	intr_mode = lpfc_enable_intr(phba, phba->intr_mode);
+	if (intr_mode == LPFC_INTR_ERROR) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"0427 Cannot re-enable interrupt after "
+				"slot reset.\n");
+		return PCI_ERS_RESULT_DISCONNECT;
+	} else
+		phba->intr_mode = intr_mode;
 
 	/* Take device offline; this will perform cleanup */
 	lpfc_offline(phba);
 	lpfc_sli_brdrestart(phba);
 
+	/* Log the current active interrupt mode */
+	lpfc_log_intr_mode(phba, phba->intr_mode);
+
 	return PCI_ERS_RESULT_RECOVERED;
 }