[ARM] 3490/1: i.MX: move uart resources to board files
Patch from Sascha Hauer
This patch moves the i.MX uart resources and the gpio pin setup to the
board files. This allows the boards to decide how many internal uarts
are connected to the outside world and whether they use rts/cts or
not.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
diff --git a/arch/arm/mach-imx/mx1ads.c b/arch/arm/mach-imx/mx1ads.c
index e34d0df..e1f6c0b 100644
--- a/arch/arm/mach-imx/mx1ads.c
+++ b/arch/arm/mach-imx/mx1ads.c
@@ -26,6 +26,7 @@
#include <asm/mach/arch.h>
#include <asm/arch/mmc.h>
+#include <asm/arch/imx-uart.h>
#include <linux/interrupt.h>
#include "generic.h"
@@ -48,8 +49,70 @@
.resource = cs89x0_resources,
};
+static struct imxuart_platform_data uart_pdata = {
+ .flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct resource imx_uart1_resources[] = {
+ [0] = {
+ .start = 0x00206000,
+ .end = 0x002060FF,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = (UART1_MINT_RX),
+ .end = (UART1_MINT_RX),
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .start = (UART1_MINT_TX),
+ .end = (UART1_MINT_TX),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device imx_uart1_device = {
+ .name = "imx-uart",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(imx_uart1_resources),
+ .resource = imx_uart1_resources,
+ .dev = {
+ .platform_data = &uart_pdata,
+ }
+};
+
+static struct resource imx_uart2_resources[] = {
+ [0] = {
+ .start = 0x00207000,
+ .end = 0x002070FF,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = (UART2_MINT_RX),
+ .end = (UART2_MINT_RX),
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .start = (UART2_MINT_TX),
+ .end = (UART2_MINT_TX),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device imx_uart2_device = {
+ .name = "imx-uart",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(imx_uart2_resources),
+ .resource = imx_uart2_resources,
+ .dev = {
+ .platform_data = &uart_pdata,
+ }
+};
+
static struct platform_device *devices[] __initdata = {
&cs89x0_device,
+ &imx_uart1_device,
+ &imx_uart2_device,
};
#ifdef CONFIG_MMC_IMX
@@ -75,6 +138,17 @@
imx_gpio_mode(GPIO_PORTB | GPIO_GIUS | GPIO_IN | 20);
imx_set_mmc_info(&mx1ads_mmc_info);
#endif
+
+ imx_gpio_mode(PC9_PF_UART1_CTS);
+ imx_gpio_mode(PC10_PF_UART1_RTS);
+ imx_gpio_mode(PC11_PF_UART1_TXD);
+ imx_gpio_mode(PC12_PF_UART1_RXD);
+
+ imx_gpio_mode(PB28_PF_UART2_CTS);
+ imx_gpio_mode(PB29_PF_UART2_RTS);
+ imx_gpio_mode(PB30_PF_UART2_TXD);
+ imx_gpio_mode(PB31_PF_UART2_RXD);
+
platform_add_devices(devices, ARRAY_SIZE(devices));
}