drivers/scsi/aacraid/comminit.c - kernel/msm-4.9 - Gitiles

 /*
  *	Adaptec AAC series RAID controller driver
  *	(c) Copyright 2001 Red Hat Inc.	<alan@redhat.com>
  *
  * based on the old aacraid driver that is..
  * Adaptec aacraid device driver for Linux.
  *
  * Copyright (c) 2000 Adaptec, Inc. (aacraid@adaptec.com)
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2, or (at your option)
  * any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; see the file COPYING.  If not, write to
  * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
  *
  * Module Name:
  *  comminit.c
  *
  * Abstract: This supports the initialization of the host adapter commuication interface.
  *    This is a platform dependent module for the pci cyclone board.
  *
  */

 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/types.h>
 #include <linux/sched.h>
 #include <linux/pci.h>
 #include <linux/spinlock.h>
 #include <linux/slab.h>
 #include <linux/blkdev.h>
 #include <linux/completion.h>
 #include <linux/mm.h>
 #include <scsi/scsi_host.h>
 #include <asm/semaphore.h>

 #include "aacraid.h"

 struct aac_common aac_config = {
 	.irq_mod = 1
 };

 static int aac_alloc_comm(struct aac_dev *dev, void **commaddr, unsigned long commsize, unsigned long commalign)
 {
 	unsigned char *base;
 	unsigned long size, align;
 	const unsigned long fibsize = 4096;
 	const unsigned long printfbufsiz = 256;
 	struct aac_init *init;
 	dma_addr_t phys;

 	size = fibsize + sizeof(struct aac_init) + commsize + commalign + printfbufsiz;


 	base = pci_alloc_consistent(dev->pdev, size, &phys);

 	if(base == NULL)
 	{
 		printk(KERN_ERR "aacraid: unable to create mapping.\n");
 		return 0;
 	}
 	dev->comm_addr = (void *)base;
 	dev->comm_phys = phys;
 	dev->comm_size = size;

 	dev->init = (struct aac_init *)(base + fibsize);
 	dev->init_pa = phys + fibsize;

 	init = dev->init;

 	init->InitStructRevision = cpu_to_le32(ADAPTER_INIT_STRUCT_REVISION);
 	if (dev->max_fib_size != sizeof(struct hw_fib))
 		init->InitStructRevision = cpu_to_le32(ADAPTER_INIT_STRUCT_REVISION_4);
 	init->MiniPortRevision = cpu_to_le32(Sa_MINIPORT_REVISION);
 	init->fsrev = cpu_to_le32(dev->fsrev);

 	/*
 	 *	Adapter Fibs are the first thing allocated so that they
 	 *	start page aligned
 	 */
 	dev->aif_base_va = (struct hw_fib *)base;

 	init->AdapterFibsVirtualAddress = 0;
 	init->AdapterFibsPhysicalAddress = cpu_to_le32((u32)phys);
 	init->AdapterFibsSize = cpu_to_le32(fibsize);
 	init->AdapterFibAlign = cpu_to_le32(sizeof(struct hw_fib));
 	/*
 	 * number of 4k pages of host physical memory. The aacraid fw needs
 	 * this number to be less than 4gb worth of pages. num_physpages is in
 	 * system page units. New firmware doesn't have any issues with the
 	 * mapping system, but older Firmware did, and had *troubles* dealing
 	 * with the math overloading past 32 bits, thus we must limit this
 	 * field.
 	 *
 	 * This assumes the memory is mapped zero->n, which isnt
 	 * always true on real computers. It also has some slight problems
 	 * with the GART on x86-64. I've btw never tried DMA from PCI space
 	 * on this platform but don't be suprised if its problematic.
 	 */
 #ifndef CONFIG_GART_IOMMU
 	if ((num_physpages << (PAGE_SHIFT - 12)) <= AAC_MAX_HOSTPHYSMEMPAGES) {
 		init->HostPhysMemPages =
 			cpu_to_le32(num_physpages << (PAGE_SHIFT-12));
 	} else
 #endif
 	{
 		init->HostPhysMemPages = cpu_to_le32(AAC_MAX_HOSTPHYSMEMPAGES);
 	}

 	init->InitFlags = 0;
 	if (dev->new_comm_interface) {
 		init->InitFlags = cpu_to_le32(INITFLAGS_NEW_COMM_SUPPORTED);
 		dprintk((KERN_WARNING"aacraid: New Comm Interface enabled\n"));
 	}
 	init->MaxIoCommands = cpu_to_le32(dev->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB);
 	init->MaxIoSize = cpu_to_le32(dev->scsi_host_ptr->max_sectors << 9);
 	init->MaxFibSize = cpu_to_le32(dev->max_fib_size);

 	/*
 	 * Increment the base address by the amount already used
 	 */
 	base = base + fibsize + sizeof(struct aac_init);
 	phys = (dma_addr_t)((ulong)phys + fibsize + sizeof(struct aac_init));
 	/*
 	 *	Align the beginning of Headers to commalign
 	 */
 	align = (commalign - ((unsigned long)(base) & (commalign - 1)));
 	base = base + align;
 	phys = phys + align;
 	/*
 	 *	Fill in addresses of the Comm Area Headers and Queues
 	 */
 	*commaddr = base;
 	init->CommHeaderAddress = cpu_to_le32((u32)phys);
 	/*
 	 *	Increment the base address by the size of the CommArea
 	 */
 	base = base + commsize;
 	phys = phys + commsize;
 	/*
 	 *	 Place the Printf buffer area after the Fast I/O comm area.
 	 */
 	dev->printfbuf = (void *)base;
 	init->printfbuf = cpu_to_le32(phys);
 	init->printfbufsiz = cpu_to_le32(printfbufsiz);
 	memset(base, 0, printfbufsiz);
 	return 1;
 }

 static void aac_queue_init(struct aac_dev * dev, struct aac_queue * q, u32 *mem, int qsize)
 {
 	q->numpending = 0;
 	q->dev = dev;
 	init_waitqueue_head(&q->cmdready);
 	INIT_LIST_HEAD(&q->cmdq);
 	init_waitqueue_head(&q->qfull);
 	spin_lock_init(&q->lockdata);
 	q->lock = &q->lockdata;
 	q->headers.producer = (__le32 *)mem;
 	q->headers.consumer = (__le32 *)(mem+1);
 	*(q->headers.producer) = cpu_to_le32(qsize);
 	*(q->headers.consumer) = cpu_to_le32(qsize);
 	q->entries = qsize;
 }

 /**
  *	aac_send_shutdown		-	shutdown an adapter
  *	@dev: Adapter to shutdown
  *
  *	This routine will send a VM_CloseAll (shutdown) request to the adapter.
  */

 int aac_send_shutdown(struct aac_dev * dev)
 {
 	struct fib * fibctx;
 	struct aac_close *cmd;
 	int status;

 	fibctx = aac_fib_alloc(dev);
 	if (!fibctx)
 		return -ENOMEM;
 	aac_fib_init(fibctx);

 	cmd = (struct aac_close *) fib_data(fibctx);

 	cmd->command = cpu_to_le32(VM_CloseAll);
 	cmd->cid = cpu_to_le32(0xffffffff);

 	status = aac_fib_send(ContainerCommand,
 			  fibctx,
 			  sizeof(struct aac_close),
 			  FsaNormal,
 			  -2 /* Timeout silently */, 1,
 			  NULL, NULL);

 	if (status == 0)
 		aac_fib_complete(fibctx);
 	aac_fib_free(fibctx);
 	return status;
 }

 /**
  *	aac_comm_init	-	Initialise FSA data structures
  *	@dev:	Adapter to initialise
  *
  *	Initializes the data structures that are required for the FSA commuication
  *	interface to operate.
  *	Returns
  *		1 - if we were able to init the commuication interface.
  *		0 - If there were errors initing. This is a fatal error.
  */

 static int aac_comm_init(struct aac_dev * dev)
 {
 	unsigned long hdrsize = (sizeof(u32) * NUMBER_OF_COMM_QUEUES) * 2;
 	unsigned long queuesize = sizeof(struct aac_entry) * TOTAL_QUEUE_ENTRIES;
 	u32 *headers;
 	struct aac_entry * queues;
 	unsigned long size;
 	struct aac_queue_block * comm = dev->queues;
 	/*
 	 *	Now allocate and initialize the zone structures used as our
 	 *	pool of FIB context records.  The size of the zone is based
 	 *	on the system memory size.  We also initialize the mutex used
 	 *	to protect the zone.
 	 */
 	spin_lock_init(&dev->fib_lock);

 	/*
 	 *	Allocate the physically contigous space for the commuication
 	 *	queue headers.
 	 */

 	size = hdrsize + queuesize;

 	if (!aac_alloc_comm(dev, (void * *)&headers, size, QUEUE_ALIGNMENT))
 		return -ENOMEM;

 	queues = (struct aac_entry *)(((ulong)headers) + hdrsize);

 	/* Adapter to Host normal priority Command queue */
 	comm->queue[HostNormCmdQueue].base = queues;
 	aac_queue_init(dev, &comm->queue[HostNormCmdQueue], headers, HOST_NORM_CMD_ENTRIES);
 	queues += HOST_NORM_CMD_ENTRIES;
 	headers += 2;

 	/* Adapter to Host high priority command queue */
 	comm->queue[HostHighCmdQueue].base = queues;
 	aac_queue_init(dev, &comm->queue[HostHighCmdQueue], headers, HOST_HIGH_CMD_ENTRIES);

 	queues += HOST_HIGH_CMD_ENTRIES;
 	headers +=2;

 	/* Host to adapter normal priority command queue */
 	comm->queue[AdapNormCmdQueue].base = queues;
 	aac_queue_init(dev, &comm->queue[AdapNormCmdQueue], headers, ADAP_NORM_CMD_ENTRIES);

 	queues += ADAP_NORM_CMD_ENTRIES;
 	headers += 2;

 	/* host to adapter high priority command queue */
 	comm->queue[AdapHighCmdQueue].base = queues;
 	aac_queue_init(dev, &comm->queue[AdapHighCmdQueue], headers, ADAP_HIGH_CMD_ENTRIES);

 	queues += ADAP_HIGH_CMD_ENTRIES;
 	headers += 2;

 	/* adapter to host normal priority response queue */
 	comm->queue[HostNormRespQueue].base = queues;
 	aac_queue_init(dev, &comm->queue[HostNormRespQueue], headers, HOST_NORM_RESP_ENTRIES);
 	queues += HOST_NORM_RESP_ENTRIES;
 	headers += 2;

 	/* adapter to host high priority response queue */
 	comm->queue[HostHighRespQueue].base = queues;
 	aac_queue_init(dev, &comm->queue[HostHighRespQueue], headers, HOST_HIGH_RESP_ENTRIES);

 	queues += HOST_HIGH_RESP_ENTRIES;
 	headers += 2;

 	/* host to adapter normal priority response queue */
 	comm->queue[AdapNormRespQueue].base = queues;
 	aac_queue_init(dev, &comm->queue[AdapNormRespQueue], headers, ADAP_NORM_RESP_ENTRIES);

 	queues += ADAP_NORM_RESP_ENTRIES;
 	headers += 2;

 	/* host to adapter high priority response queue */
 	comm->queue[AdapHighRespQueue].base = queues;
 	aac_queue_init(dev, &comm->queue[AdapHighRespQueue], headers, ADAP_HIGH_RESP_ENTRIES);

 	comm->queue[AdapNormCmdQueue].lock = comm->queue[HostNormRespQueue].lock;
 	comm->queue[AdapHighCmdQueue].lock = comm->queue[HostHighRespQueue].lock;
 	comm->queue[AdapNormRespQueue].lock = comm->queue[HostNormCmdQueue].lock;
 	comm->queue[AdapHighRespQueue].lock = comm->queue[HostHighCmdQueue].lock;

 	return 0;
 }

 struct aac_dev *aac_init_adapter(struct aac_dev *dev)
 {
 	u32 status[5];
 	struct Scsi_Host * host = dev->scsi_host_ptr;

 	/*
 	 *	Check the preferred comm settings, defaults from template.
 	 */
 	dev->max_fib_size = sizeof(struct hw_fib);
 	dev->sg_tablesize = host->sg_tablesize = (dev->max_fib_size
 		- sizeof(struct aac_fibhdr)
 		- sizeof(struct aac_write) + sizeof(struct sgentry))
 			/ sizeof(struct sgentry);
 	dev->new_comm_interface = 0;
 	dev->raw_io_64 = 0;
 	if ((!aac_adapter_sync_cmd(dev, GET_ADAPTER_PROPERTIES,
 		0, 0, 0, 0, 0, 0, status+0, status+1, status+2, NULL, NULL)) &&
 	 		(status[0] == 0x00000001)) {
 		if (status[1] & AAC_OPT_NEW_COMM_64)
 			dev->raw_io_64 = 1;
 		if (status[1] & AAC_OPT_NEW_COMM)
 			dev->new_comm_interface = dev->a_ops.adapter_send != 0;
 		if (dev->new_comm_interface && (status[2] > dev->base_size)) {
 			iounmap(dev->regs.sa);
 			dev->base_size = status[2];
 			dprintk((KERN_DEBUG "ioremap(%lx,%d)\n",
 			  host->base, status[2]));
 			dev->regs.sa = ioremap(host->base, status[2]);
 			if (dev->regs.sa == NULL) {
 				/* remap failed, go back ... */
 				dev->new_comm_interface = 0;
 				dev->regs.sa = ioremap(host->base,
 						AAC_MIN_FOOTPRINT_SIZE);
 				if (dev->regs.sa == NULL) {
 					printk(KERN_WARNING
 					  "aacraid: unable to map adapter.\n");
 					return NULL;
 				}
 			}
 		}
 	}
 	if ((!aac_adapter_sync_cmd(dev, GET_COMM_PREFERRED_SETTINGS,
 	  0, 0, 0, 0, 0, 0,
 	  status+0, status+1, status+2, status+3, status+4))
 	 && (status[0] == 0x00000001)) {
 		/*
 		 *	status[1] >> 16		maximum command size in KB
 		 *	status[1] & 0xFFFF	maximum FIB size
 		 *	status[2] >> 16		maximum SG elements to driver
 		 *	status[2] & 0xFFFF	maximum SG elements from driver
 		 *	status[3] & 0xFFFF	maximum number FIBs outstanding
 		 */
 		host->max_sectors = (status[1] >> 16) << 1;
 		dev->max_fib_size = status[1] & 0xFFFF;
 		host->sg_tablesize = status[2] >> 16;
 		dev->sg_tablesize = status[2] & 0xFFFF;
 		host->can_queue = (status[3] & 0xFFFF) - AAC_NUM_MGT_FIB;
 		/*
 		 *	NOTE:
 		 *	All these overrides are based on a fixed internal
 		 *	knowledge and understanding of existing adapters,
 		 *	acbsize should be set with caution.
 		 */
 		if (acbsize == 512) {
 			host->max_sectors = AAC_MAX_32BIT_SGBCOUNT;
 			dev->max_fib_size = 512;
 			dev->sg_tablesize = host->sg_tablesize
 			  = (512 - sizeof(struct aac_fibhdr)
 			    - sizeof(struct aac_write) + sizeof(struct sgentry))
 			     / sizeof(struct sgentry);
 			host->can_queue = AAC_NUM_IO_FIB;
 		} else if (acbsize == 2048) {
 			host->max_sectors = 512;
 			dev->max_fib_size = 2048;
 			host->sg_tablesize = 65;
 			dev->sg_tablesize = 81;
 			host->can_queue = 512 - AAC_NUM_MGT_FIB;
 		} else if (acbsize == 4096) {
 			host->max_sectors = 1024;
 			dev->max_fib_size = 4096;
 			host->sg_tablesize = 129;
 			dev->sg_tablesize = 166;
 			host->can_queue = 256 - AAC_NUM_MGT_FIB;
 		} else if (acbsize == 8192) {
 			host->max_sectors = 2048;
 			dev->max_fib_size = 8192;
 			host->sg_tablesize = 257;
 			dev->sg_tablesize = 337;
 			host->can_queue = 128 - AAC_NUM_MGT_FIB;
 		} else if (acbsize > 0) {
 			printk("Illegal acbsize=%d ignored\n", acbsize);
 		}
 	}
 	{

 		if (numacb > 0) {
 			if (numacb < host->can_queue)
 				host->can_queue = numacb;
 			else
 				printk("numacb=%d ignored\n", numacb);
 		}
 	}

 	/*
 	 *	Ok now init the communication subsystem
 	 */

 	dev->queues = (struct aac_queue_block *) kmalloc(sizeof(struct aac_queue_block), GFP_KERNEL);
 	if (dev->queues == NULL) {
 		printk(KERN_ERR "Error could not allocate comm region.\n");
 		return NULL;
 	}
 	memset(dev->queues, 0, sizeof(struct aac_queue_block));

 	if (aac_comm_init(dev)<0){
 		kfree(dev->queues);
 		return NULL;
 	}
 	/*
 	 *	Initialize the list of fibs
 	 */
 	if (aac_fib_setup(dev) < 0) {
 		kfree(dev->queues);
 		return NULL;
 	}

 	INIT_LIST_HEAD(&dev->fib_list);

 	return dev;
 }
	/*
	* Adaptec AAC series RAID controller driver
	* (c) Copyright 2001 Red Hat Inc. <alan@redhat.com>
	*
	* based on the old aacraid driver that is..
	* Adaptec aacraid device driver for Linux.
	*
	* Copyright (c) 2000 Adaptec, Inc. (aacraid@adaptec.com)
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License as published by
	* the Free Software Foundation; either version 2, or (at your option)
	* any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; see the file COPYING. If not, write to
	* the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
	*
	* Module Name:
	* comminit.c
	*
	* Abstract: This supports the initialization of the host adapter commuication interface.
	* This is a platform dependent module for the pci cyclone board.
	*
	*/

	#include <linux/kernel.h>
	#include <linux/init.h>
	#include <linux/types.h>
	#include <linux/sched.h>
	#include <linux/pci.h>
	#include <linux/spinlock.h>
	#include <linux/slab.h>
	#include <linux/blkdev.h>
	#include <linux/completion.h>
	#include <linux/mm.h>
	#include <scsi/scsi_host.h>
	#include <asm/semaphore.h>

	#include "aacraid.h"

	struct aac_common aac_config = {
	.irq_mod = 1
	};

	static int aac_alloc_comm(struct aac_dev dev, void *commaddr, unsigned long commsize, unsigned long commalign)
	{
	unsigned char *base;
	unsigned long size, align;
	const unsigned long fibsize = 4096;
	const unsigned long printfbufsiz = 256;
	struct aac_init *init;
	dma_addr_t phys;

	size = fibsize + sizeof(struct aac_init) + commsize + commalign + printfbufsiz;


	base = pci_alloc_consistent(dev->pdev, size, &phys);

	if(base == NULL)
	{
	printk(KERN_ERR "aacraid: unable to create mapping.\n");
	return 0;
	}
	dev->comm_addr = (void *)base;
	dev->comm_phys = phys;
	dev->comm_size = size;

	dev->init = (struct aac_init *)(base + fibsize);
	dev->init_pa = phys + fibsize;

	init = dev->init;

	init->InitStructRevision = cpu_to_le32(ADAPTER_INIT_STRUCT_REVISION);
	if (dev->max_fib_size != sizeof(struct hw_fib))
	init->InitStructRevision = cpu_to_le32(ADAPTER_INIT_STRUCT_REVISION_4);
	init->MiniPortRevision = cpu_to_le32(Sa_MINIPORT_REVISION);
	init->fsrev = cpu_to_le32(dev->fsrev);

	/*
	* Adapter Fibs are the first thing allocated so that they
	* start page aligned
	*/
	dev->aif_base_va = (struct hw_fib *)base;

	init->AdapterFibsVirtualAddress = 0;
	init->AdapterFibsPhysicalAddress = cpu_to_le32((u32)phys);
	init->AdapterFibsSize = cpu_to_le32(fibsize);
	init->AdapterFibAlign = cpu_to_le32(sizeof(struct hw_fib));
	/*
	* number of 4k pages of host physical memory. The aacraid fw needs
	* this number to be less than 4gb worth of pages. num_physpages is in
	* system page units. New firmware doesn't have any issues with the
	* mapping system, but older Firmware did, and had troubles dealing
	* with the math overloading past 32 bits, thus we must limit this
	* field.
	*
	* This assumes the memory is mapped zero->n, which isnt
	* always true on real computers. It also has some slight problems
	* with the GART on x86-64. I've btw never tried DMA from PCI space
	* on this platform but don't be suprised if its problematic.
	*/
	#ifndef CONFIG_GART_IOMMU
	if ((num_physpages << (PAGE_SHIFT - 12)) <= AAC_MAX_HOSTPHYSMEMPAGES) {
	init->HostPhysMemPages =
	cpu_to_le32(num_physpages << (PAGE_SHIFT-12));
	} else
	#endif
	{
	init->HostPhysMemPages = cpu_to_le32(AAC_MAX_HOSTPHYSMEMPAGES);
	}

	init->InitFlags = 0;
	if (dev->new_comm_interface) {
	init->InitFlags = cpu_to_le32(INITFLAGS_NEW_COMM_SUPPORTED);
	dprintk((KERN_WARNING"aacraid: New Comm Interface enabled\n"));
	}
	init->MaxIoCommands = cpu_to_le32(dev->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB);
	init->MaxIoSize = cpu_to_le32(dev->scsi_host_ptr->max_sectors << 9);
	init->MaxFibSize = cpu_to_le32(dev->max_fib_size);

	/*
	* Increment the base address by the amount already used
	*/
	base = base + fibsize + sizeof(struct aac_init);
	phys = (dma_addr_t)((ulong)phys + fibsize + sizeof(struct aac_init));
	/*
	* Align the beginning of Headers to commalign
	*/
	align = (commalign - ((unsigned long)(base) & (commalign - 1)));
	base = base + align;
	phys = phys + align;
	/*
	* Fill in addresses of the Comm Area Headers and Queues
	*/
	*commaddr = base;
	init->CommHeaderAddress = cpu_to_le32((u32)phys);
	/*
	* Increment the base address by the size of the CommArea
	*/
	base = base + commsize;
	phys = phys + commsize;
	/*
	* Place the Printf buffer area after the Fast I/O comm area.
	*/
	dev->printfbuf = (void *)base;
	init->printfbuf = cpu_to_le32(phys);
	init->printfbufsiz = cpu_to_le32(printfbufsiz);
	memset(base, 0, printfbufsiz);
	return 1;
	}

	static void aac_queue_init(struct aac_dev * dev, struct aac_queue * q, u32 *mem, int qsize)
	{
	q->numpending = 0;
	q->dev = dev;
	init_waitqueue_head(&q->cmdready);
	INIT_LIST_HEAD(&q->cmdq);
	init_waitqueue_head(&q->qfull);
	spin_lock_init(&q->lockdata);
	q->lock = &q->lockdata;
	q->headers.producer = (__le32 *)mem;
	q->headers.consumer = (__le32 *)(mem+1);
	*(q->headers.producer) = cpu_to_le32(qsize);
	*(q->headers.consumer) = cpu_to_le32(qsize);
	q->entries = qsize;
	}

	/**
	* aac_send_shutdown - shutdown an adapter
	* @dev: Adapter to shutdown
	*
	* This routine will send a VM_CloseAll (shutdown) request to the adapter.
	*/

	int aac_send_shutdown(struct aac_dev * dev)
	{
	struct fib * fibctx;
	struct aac_close *cmd;
	int status;

	fibctx = aac_fib_alloc(dev);
	if (!fibctx)
	return -ENOMEM;
	aac_fib_init(fibctx);

	cmd = (struct aac_close *) fib_data(fibctx);

	cmd->command = cpu_to_le32(VM_CloseAll);
	cmd->cid = cpu_to_le32(0xffffffff);

	status = aac_fib_send(ContainerCommand,
	fibctx,
	sizeof(struct aac_close),
	FsaNormal,
	-2 /* Timeout silently */, 1,
	NULL, NULL);

	if (status == 0)
	aac_fib_complete(fibctx);
	aac_fib_free(fibctx);
	return status;
	}

	/**
	* aac_comm_init - Initialise FSA data structures
	* @dev: Adapter to initialise
	*
	* Initializes the data structures that are required for the FSA commuication
	* interface to operate.
	* Returns
	* 1 - if we were able to init the commuication interface.
	* 0 - If there were errors initing. This is a fatal error.
	*/

	static int aac_comm_init(struct aac_dev * dev)
	{
	unsigned long hdrsize = (sizeof(u32) * NUMBER_OF_COMM_QUEUES) * 2;
	unsigned long queuesize = sizeof(struct aac_entry) * TOTAL_QUEUE_ENTRIES;
	u32 *headers;
	struct aac_entry * queues;
	unsigned long size;
	struct aac_queue_block * comm = dev->queues;
	/*
	* Now allocate and initialize the zone structures used as our
	* pool of FIB context records. The size of the zone is based
	* on the system memory size. We also initialize the mutex used
	* to protect the zone.
	*/
	spin_lock_init(&dev->fib_lock);

	/*
	* Allocate the physically contigous space for the commuication
	* queue headers.
	*/

	size = hdrsize + queuesize;

	if (!aac_alloc_comm(dev, (void * *)&headers, size, QUEUE_ALIGNMENT))
	return -ENOMEM;

	queues = (struct aac_entry *)(((ulong)headers) + hdrsize);

	/* Adapter to Host normal priority Command queue */
	comm->queue[HostNormCmdQueue].base = queues;
	aac_queue_init(dev, &comm->queue[HostNormCmdQueue], headers, HOST_NORM_CMD_ENTRIES);
	queues += HOST_NORM_CMD_ENTRIES;
	headers += 2;

	/* Adapter to Host high priority command queue */
	comm->queue[HostHighCmdQueue].base = queues;
	aac_queue_init(dev, &comm->queue[HostHighCmdQueue], headers, HOST_HIGH_CMD_ENTRIES);

	queues += HOST_HIGH_CMD_ENTRIES;
	headers +=2;

	/* Host to adapter normal priority command queue */
	comm->queue[AdapNormCmdQueue].base = queues;
	aac_queue_init(dev, &comm->queue[AdapNormCmdQueue], headers, ADAP_NORM_CMD_ENTRIES);

	queues += ADAP_NORM_CMD_ENTRIES;
	headers += 2;

	/* host to adapter high priority command queue */
	comm->queue[AdapHighCmdQueue].base = queues;
	aac_queue_init(dev, &comm->queue[AdapHighCmdQueue], headers, ADAP_HIGH_CMD_ENTRIES);

	queues += ADAP_HIGH_CMD_ENTRIES;
	headers += 2;

	/* adapter to host normal priority response queue */
	comm->queue[HostNormRespQueue].base = queues;
	aac_queue_init(dev, &comm->queue[HostNormRespQueue], headers, HOST_NORM_RESP_ENTRIES);
	queues += HOST_NORM_RESP_ENTRIES;
	headers += 2;

	/* adapter to host high priority response queue */
	comm->queue[HostHighRespQueue].base = queues;
	aac_queue_init(dev, &comm->queue[HostHighRespQueue], headers, HOST_HIGH_RESP_ENTRIES);

	queues += HOST_HIGH_RESP_ENTRIES;
	headers += 2;

	/* host to adapter normal priority response queue */
	comm->queue[AdapNormRespQueue].base = queues;
	aac_queue_init(dev, &comm->queue[AdapNormRespQueue], headers, ADAP_NORM_RESP_ENTRIES);

	queues += ADAP_NORM_RESP_ENTRIES;
	headers += 2;

	/* host to adapter high priority response queue */
	comm->queue[AdapHighRespQueue].base = queues;
	aac_queue_init(dev, &comm->queue[AdapHighRespQueue], headers, ADAP_HIGH_RESP_ENTRIES);

	comm->queue[AdapNormCmdQueue].lock = comm->queue[HostNormRespQueue].lock;
	comm->queue[AdapHighCmdQueue].lock = comm->queue[HostHighRespQueue].lock;
	comm->queue[AdapNormRespQueue].lock = comm->queue[HostNormCmdQueue].lock;
	comm->queue[AdapHighRespQueue].lock = comm->queue[HostHighCmdQueue].lock;

	return 0;
	}

	struct aac_dev aac_init_adapter(struct aac_dev dev)
	{
	u32 status[5];
	struct Scsi_Host * host = dev->scsi_host_ptr;

	/*
	* Check the preferred comm settings, defaults from template.
	*/
	dev->max_fib_size = sizeof(struct hw_fib);
	dev->sg_tablesize = host->sg_tablesize = (dev->max_fib_size
	- sizeof(struct aac_fibhdr)
	- sizeof(struct aac_write) + sizeof(struct sgentry))
	/ sizeof(struct sgentry);
	dev->new_comm_interface = 0;
	dev->raw_io_64 = 0;
	if ((!aac_adapter_sync_cmd(dev, GET_ADAPTER_PROPERTIES,
	0, 0, 0, 0, 0, 0, status+0, status+1, status+2, NULL, NULL)) &&
	(status[0] == 0x00000001)) {
	if (status[1] & AAC_OPT_NEW_COMM_64)
	dev->raw_io_64 = 1;
	if (status[1] & AAC_OPT_NEW_COMM)
	dev->new_comm_interface = dev->a_ops.adapter_send != 0;
	if (dev->new_comm_interface && (status[2] > dev->base_size)) {
	iounmap(dev->regs.sa);
	dev->base_size = status[2];
	dprintk((KERN_DEBUG "ioremap(%lx,%d)\n",
	host->base, status[2]));
	dev->regs.sa = ioremap(host->base, status[2]);
	if (dev->regs.sa == NULL) {
	/* remap failed, go back ... */
	dev->new_comm_interface = 0;
	dev->regs.sa = ioremap(host->base,
	AAC_MIN_FOOTPRINT_SIZE);
	if (dev->regs.sa == NULL) {
	printk(KERN_WARNING
	"aacraid: unable to map adapter.\n");
	return NULL;
	}
	}
	}
	}
	if ((!aac_adapter_sync_cmd(dev, GET_COMM_PREFERRED_SETTINGS,
	0, 0, 0, 0, 0, 0,
	status+0, status+1, status+2, status+3, status+4))
	&& (status[0] == 0x00000001)) {
	/*
	* status[1] >> 16 maximum command size in KB
	* status[1] & 0xFFFF maximum FIB size
	* status[2] >> 16 maximum SG elements to driver
	* status[2] & 0xFFFF maximum SG elements from driver
	* status[3] & 0xFFFF maximum number FIBs outstanding
	*/
	host->max_sectors = (status[1] >> 16) << 1;
	dev->max_fib_size = status[1] & 0xFFFF;
	host->sg_tablesize = status[2] >> 16;
	dev->sg_tablesize = status[2] & 0xFFFF;
	host->can_queue = (status[3] & 0xFFFF) - AAC_NUM_MGT_FIB;
	/*
	* NOTE:
	* All these overrides are based on a fixed internal
	* knowledge and understanding of existing adapters,
	* acbsize should be set with caution.
	*/
	if (acbsize == 512) {
	host->max_sectors = AAC_MAX_32BIT_SGBCOUNT;
	dev->max_fib_size = 512;
	dev->sg_tablesize = host->sg_tablesize
	= (512 - sizeof(struct aac_fibhdr)
	- sizeof(struct aac_write) + sizeof(struct sgentry))
	/ sizeof(struct sgentry);
	host->can_queue = AAC_NUM_IO_FIB;
	} else if (acbsize == 2048) {
	host->max_sectors = 512;
	dev->max_fib_size = 2048;
	host->sg_tablesize = 65;
	dev->sg_tablesize = 81;
	host->can_queue = 512 - AAC_NUM_MGT_FIB;
	} else if (acbsize == 4096) {
	host->max_sectors = 1024;
	dev->max_fib_size = 4096;
	host->sg_tablesize = 129;
	dev->sg_tablesize = 166;
	host->can_queue = 256 - AAC_NUM_MGT_FIB;
	} else if (acbsize == 8192) {
	host->max_sectors = 2048;
	dev->max_fib_size = 8192;
	host->sg_tablesize = 257;
	dev->sg_tablesize = 337;
	host->can_queue = 128 - AAC_NUM_MGT_FIB;
	} else if (acbsize > 0) {
	printk("Illegal acbsize=%d ignored\n", acbsize);
	}
	}
	{

	if (numacb > 0) {
	if (numacb < host->can_queue)
	host->can_queue = numacb;
	else
	printk("numacb=%d ignored\n", numacb);
	}
	}

	/*
	* Ok now init the communication subsystem
	*/

	dev->queues = (struct aac_queue_block *) kmalloc(sizeof(struct aac_queue_block), GFP_KERNEL);
	if (dev->queues == NULL) {
	printk(KERN_ERR "Error could not allocate comm region.\n");
	return NULL;
	}
	memset(dev->queues, 0, sizeof(struct aac_queue_block));

	if (aac_comm_init(dev)<0){
	kfree(dev->queues);
	return NULL;
	}
	/*
	* Initialize the list of fibs
	*/
	if (aac_fib_setup(dev) < 0) {
	kfree(dev->queues);
	return NULL;
	}

	INIT_LIST_HEAD(&dev->fib_list);

	return dev;
	}