blob: 508b645a46fa1c679e86e2cd4c228e558db3eb31 [file] [log] [blame]
/* Copyright (c) 2016-2017, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <dt-bindings/gpio/gpio.h>
#include "sdm845-camera-sensor-mtp.dtsi"
#include "smb1355.dtsi"
/ {
bluetooth: bt_wcn3990 {
compatible = "qca,wcn3990";
qca,bt-vdd-io-supply = <&pm8998_s3>;
qca,bt-vdd-xtal-supply = <&pm8998_s5>;
qca,bt-vdd-core-supply = <&pm8998_l7>;
qca,bt-vdd-pa-supply = <&pm8998_l17>;
qca,bt-vdd-ldo-supply = <&pm8998_l25>;
qca,bt-vdd-io-voltage-level = <1352000 1352000>;
qca,bt-vdd-xtal-voltage-level = <2040000 2040000>;
qca,bt-vdd-core-voltage-level = <1800000 1800000>;
qca,bt-vdd-pa-voltage-level = <1304000 1304000>;
qca,bt-vdd-ldo-voltage-level = <3312000 3312000>;
qca,bt-vdd-io-current-level = <1>; /* LPM/PFM */
qca,bt-vdd-xtal-current-level = <1>; /* LPM/PFM */
qca,bt-vdd-core-current-level = <1>; /* LPM/PFM */
qca,bt-vdd-pa-current-level = <1>; /* LPM/PFM */
qca,bt-vdd-ldo-current-level = <1>; /* LPM/PFM */
};
};
&soc {
gpio_keys {
compatible = "gpio-keys";
label = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&key_vol_up_default
&key_cam_snapshot_default
&key_cam_focus_default>;
vol_up {
label = "volume_up";
gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
linux,code = <115>;
gpio-key,wakeup;
debounce-interval = <15>;
linux,can-disable;
};
cam_snapshot {
label = "cam_snapshot";
gpios = <&pm8998_gpios 7 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
linux,code = <766>;
gpio-key,wakeup;
debounce-interval = <15>;
linux,can-disable;
};
cam_focus {
label = "cam_focus";
gpios = <&pm8998_gpios 8 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
linux,code = <528>;
gpio-key,wakeup;
debounce-interval = <15>;
linux,can-disable;
};
};
};
&labibb {
status = "ok";
qcom,qpnp-labibb-mode = "lcd";
};
&dsi_dual_nt35597_truly_video {
qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;
qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled";
qcom,mdss-dsi-bl-min-level = <1>;
qcom,mdss-dsi-bl-max-level = <4095>;
qcom,mdss-dsi-panel-mode-gpio-state = "dual_port";
qcom,panel-mode-gpio = <&tlmm 52 0>;
qcom,platform-reset-gpio = <&tlmm 6 0>;
};
&dsi_dual_nt35597_truly_cmd {
qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;
qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled";
qcom,mdss-dsi-bl-min-level = <1>;
qcom,mdss-dsi-bl-max-level = <4095>;
qcom,mdss-dsi-panel-mode-gpio-state = "dual_port";
qcom,panel-mode-gpio = <&tlmm 52 0>;
qcom,platform-reset-gpio = <&tlmm 6 0>;
};
&dsi_sim_vid {
qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;
qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled";
qcom,platform-reset-gpio = <&tlmm 6 0>;
};
&dsi_dual_sim_vid {
qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;
qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled";
qcom,platform-reset-gpio = <&tlmm 6 0>;
};
&dsi_sim_cmd {
qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;
qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled";
qcom,platform-reset-gpio = <&tlmm 6 0>;
};
&dsi_dual_sim_cmd {
qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;
qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled";
qcom,platform-reset-gpio = <&tlmm 6 0>;
};
&dsi_dual_nt35597_truly_cmd_display {
qcom,dsi-display-active;
};
&pmi8998_wled {
status = "okay";
qcom,led-strings-list = [01 02];
};
&mdss_mdp {
#cooling-cells = <2>;
};
&ufsphy_mem {
compatible = "qcom,ufs-phy-qmp-v3";
vdda-phy-supply = <&pm8998_l1>; /* 0.88v */
vdda-pll-supply = <&pm8998_l26>; /* 1.2v */
vdda-phy-max-microamp = <62900>;
vdda-pll-max-microamp = <18300>;
status = "ok";
};
&ufshc_mem {
vdd-hba-supply = <&ufs_phy_gdsc>;
vdd-hba-fixed-regulator;
vcc-supply = <&pm8998_l20>;
vccq2-supply = <&pm8998_s4>;
vcc-max-microamp = <600000>;
vccq2-max-microamp = <600000>;
qcom,vddp-ref-clk-supply = <&pm8998_l2>;
qcom,vddp-ref-clk-max-microamp = <100>;
status = "ok";
};
&ufsphy_card {
compatible = "qcom,ufs-phy-qmp-v3";
vdda-phy-supply = <&pm8998_l1>; /* 0.88v */
vdda-pll-supply = <&pm8998_l26>; /* 1.2v */
vdda-phy-max-microamp = <62900>;
vdda-pll-max-microamp = <18300>;
status = "ok";
};
&ufshc_card {
vdd-hba-supply = <&ufs_card_gdsc>;
vdd-hba-fixed-regulator;
vcc-supply = <&pm8998_l21>;
vccq2-supply = <&pm8998_s4>;
vcc-max-microamp = <300000>;
vccq2-max-microamp = <300000>;
qcom,vddp-ref-clk-supply = <&pm8998_l2>;
qcom,vddp-ref-clk-max-microamp = <100>;
status = "ok";
};
&sdhc_2 {
vdd-supply = <&pm8998_l21>;
qcom,vdd-voltage-level = <2950000 2960000>;
qcom,vdd-current-level = <200 800000>;
vdd-io-supply = <&pm8998_l13>;
qcom,vdd-io-voltage-level = <1808000 2960000>;
qcom,vdd-io-current-level = <200 22000>;
pinctrl-names = "active", "sleep";
pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>;
pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>;
qcom,clk-rates = <400000 20000000 25000000
50000000 100000000 200000000>;
qcom,bus-speed-mode = "SDR12", "SDR25", "SDR50", "DDR50", "SDR104";
status = "ok";
};
&pmi8998_switch1 {
pinctrl-names = "led_enable", "led_disable";
pinctrl-0 = <&flash_led3_front_en>;
pinctrl-1 = <&flash_led3_front_dis>;
};
/{
mtp_batterydata: qcom,battery-data {
qcom,batt-id-range-pct = <15>;
#include "fg-gen3-batterydata-itech-3000mah.dtsi"
#include "fg-gen3-batterydata-ascent-3450mah.dtsi"
#include "fg-gen3-batterydata-demo-6000mah.dtsi"
};
extcon_usb1: extcon_usb1 {
compatible = "linux,extcon-usb-gpio";
vbus-gpio = <&pmi8998_gpios 8 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&usb2_vbus_det_default>;
};
};
&pmi8998_fg {
qcom,battery-data = <&mtp_batterydata>;
};
&smb1355_charger {
status = "ok";
};
/ {
aliases {
serial0 = &qupv3_se9_2uart;
spi0 = &qupv3_se8_spi;
i2c0 = &qupv3_se10_i2c;
i2c1 = &qupv3_se3_i2c;
hsuart0 = &qupv3_se6_4uart;
};
};
&qupv3_se9_2uart {
status = "ok";
};
&qupv3_se8_spi {
status = "ok";
};
&qupv3_se3_i2c {
status = "ok";
};
&qupv3_se10_i2c {
status = "ok";
};
&qupv3_se6_4uart {
status = "ok";
};
&usb1 {
status = "okay";
extcon = <&extcon_usb1>;
};
&qusb_phy1 {
status = "okay";
};
&usb_qmp_phy {
status = "okay";
};
&pm8998_vadc {
chan@83 {
label = "vph_pwr";
reg = <0x83>;
qcom,decimation = <2>;
qcom,pre-div-channel-scaling = <1>;
qcom,calibration-type = "absolute";
qcom,scale-function = <0>;
qcom,hw-settle-time = <0>;
qcom,fast-avg-setup = <0>;
};
chan@85 {
label = "vcoin";
reg = <0x85>;
qcom,decimation = <2>;
qcom,pre-div-channel-scaling = <1>;
qcom,calibration-type = "absolute";
qcom,scale-function = <0>;
qcom,hw-settle-time = <0>;
qcom,fast-avg-setup = <0>;
};
chan@4c {
label = "xo_therm";
reg = <0x4c>;
qcom,decimation = <2>;
qcom,pre-div-channel-scaling = <0>;
qcom,calibration-type = "ratiometric";
qcom,scale-function = <4>;
qcom,hw-settle-time = <2>;
qcom,fast-avg-setup = <0>;
};
chan@4d {
label = "msm_therm";
reg = <0x4d>;
qcom,decimation = <2>;
qcom,pre-div-channel-scaling = <0>;
qcom,calibration-type = "ratiometric";
qcom,scale-function = <2>;
qcom,hw-settle-time = <2>;
qcom,fast-avg-setup = <0>;
};
chan@4f {
label = "pa_therm1";
reg = <0x4f>;
qcom,decimation = <2>;
qcom,pre-div-channel-scaling = <0>;
qcom,calibration-type = "ratiometric";
qcom,scale-function = <2>;
qcom,hw-settle-time = <2>;
qcom,fast-avg-setup = <0>;
};
chan@51 {
label = "quiet_therm";
reg = <0x51>;
qcom,decimation = <2>;
qcom,pre-div-channel-scaling = <0>;
qcom,calibration-type = "ratiometric";
qcom,scale-function = <2>;
qcom,hw-settle-time = <2>;
qcom,fast-avg-setup = <0>;
};
};
&pm8998_adc_tm {
chan@83 {
label = "vph_pwr";
reg = <0x83>;
qcom,pre-div-channel-scaling = <1>;
qcom,calibration-type = "absolute";
qcom,scale-function = <0>;
qcom,hw-settle-time = <0>;
qcom,btm-channel-number = <0x60>;
};
chan@4c {
label = "xo_therm";
reg = <0x4c>;
qcom,pre-div-channel-scaling = <0>;
qcom,calibration-type = "ratiometric";
qcom,scale-function = <4>;
qcom,hw-settle-time = <2>;
qcom,btm-channel-number = <0x68>;
qcom,thermal-node;
};
chan@4d {
label = "msm_therm";
reg = <0x4d>;
qcom,pre-div-channel-scaling = <0>;
qcom,calibration-type = "ratiometric";
qcom,scale-function = <2>;
qcom,hw-settle-time = <2>;
qcom,btm-channel-number = <0x70>;
qcom,thermal-node;
};
chan@4f {
label = "pa_therm1";
reg = <0x4f>;
qcom,pre-div-channel-scaling = <0>;
qcom,calibration-type = "ratiometric";
qcom,scale-function = <2>;
qcom,hw-settle-time = <2>;
qcom,btm-channel-number = <0x78>;
qcom,thermal-node;
};
chan@51 {
label = "quiet_therm";
reg = <0x51>;
qcom,pre-div-channel-scaling = <0>;
qcom,calibration-type = "ratiometric";
qcom,scale-function = <2>;
qcom,hw-settle-time = <2>;
qcom,btm-channel-number = <0x80>;
qcom,thermal-node;
};
};
&thermal_zones {
xo-therm-adc {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&pm8998_adc_tm 0x4c>;
thermal-governor = "user_space";
trips {
active-config0 {
temperature = <65000>;
hysteresis = <1000>;
type = "passive";
};
};
};
msm-therm-adc {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&pm8998_adc_tm 0x4d>;
thermal-governor = "user_space";
trips {
active-config0 {
temperature = <65000>;
hysteresis = <1000>;
type = "passive";
};
};
};
pa-therm1-adc {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&pm8998_adc_tm 0x4f>;
thermal-governor = "user_space";
trips {
active-config0 {
temperature = <65000>;
hysteresis = <1000>;
type = "passive";
};
};
};
quiet-therm-adc {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&pm8998_adc_tm 0x51>;
thermal-governor = "user_space";
trips {
active-config0 {
temperature = <65000>;
hysteresis = <1000>;
type = "passive";
};
};
};
};
&wil6210 {
status = "ok";
};