| /* Copyright (c) 2017, The Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include "smb1355.dtsi" |
| #include <dt-bindings/gpio/gpio.h> |
| |
| /{ |
| qrd_batterydata: qcom,battery-data { |
| qcom,batt-id-range-pct = <15>; |
| #include "fg-gen3-batterydata-itech-3000mah.dtsi" |
| #include "fg-gen3-batterydata-ascent-3450mah.dtsi" |
| }; |
| |
| aliases { |
| serial0 = &qupv3_se9_2uart; |
| spi0 = &qupv3_se8_spi; |
| i2c0 = &qupv3_se10_i2c; |
| i2c1 = &qupv3_se3_i2c; |
| hsuart0 = &qupv3_se6_4uart; |
| }; |
| }; |
| |
| &qupv3_se9_2uart { |
| status = "ok"; |
| }; |
| |
| &qupv3_se8_spi { |
| status = "ok"; |
| }; |
| |
| &qupv3_se3_i2c { |
| status = "ok"; |
| }; |
| |
| &qupv3_se10_i2c { |
| status = "ok"; |
| }; |
| |
| &qupv3_se6_4uart { |
| status = "ok"; |
| }; |
| |
| &pmi8998_fg { |
| qcom,battery-data = <&qrd_batterydata>; |
| }; |
| |
| &smb1355_charger { |
| status = "ok"; |
| }; |
| |
| &mdss_mdp { |
| #cooling-cells = <2>; |
| }; |
| |
| &soc { |
| sound-tavil { |
| qcom,wsa-max-devs = <1>; |
| qcom,wsa-devs = <&wsa881x_0211>, <&wsa881x_0213>; |
| qcom,wsa-aux-dev-prefix = "SpkrRight", "SpkrRight"; |
| }; |
| }; |
| |
| &ufsphy_mem { |
| compatible = "qcom,ufs-phy-qmp-v3"; |
| |
| vdda-phy-supply = <&pm8998_l1>; /* 0.88v */ |
| vdda-pll-supply = <&pm8998_l26>; /* 1.2v */ |
| vdda-phy-max-microamp = <62900>; |
| vdda-pll-max-microamp = <18300>; |
| |
| status = "ok"; |
| }; |
| |
| &ufshc_mem { |
| vdd-hba-supply = <&ufs_phy_gdsc>; |
| vdd-hba-fixed-regulator; |
| vcc-supply = <&pm8998_l20>; |
| vccq2-supply = <&pm8998_s4>; |
| vcc-max-microamp = <600000>; |
| vccq2-max-microamp = <600000>; |
| |
| qcom,vddp-ref-clk-supply = <&pm8998_l2>; |
| qcom,vddp-ref-clk-max-microamp = <100>; |
| |
| status = "ok"; |
| }; |
| |
| &ufsphy_card { |
| compatible = "qcom,ufs-phy-qmp-v3"; |
| |
| vdda-phy-supply = <&pm8998_l1>; /* 0.88v */ |
| vdda-pll-supply = <&pm8998_l26>; /* 1.2v */ |
| vdda-phy-max-microamp = <62900>; |
| vdda-pll-max-microamp = <18300>; |
| |
| status = "ok"; |
| }; |
| |
| &ufshc_card { |
| vdd-hba-supply = <&ufs_card_gdsc>; |
| vdd-hba-fixed-regulator; |
| vcc-supply = <&pm8998_l21>; |
| vccq2-supply = <&pm8998_s4>; |
| vcc-max-microamp = <300000>; |
| vccq2-max-microamp = <300000>; |
| |
| qcom,vddp-ref-clk-supply = <&pm8998_l2>; |
| qcom,vddp-ref-clk-max-microamp = <100>; |
| |
| status = "ok"; |
| }; |
| |
| &labibb { |
| status = "ok"; |
| qcom,qpnp-labibb-mode = "lcd"; |
| }; |
| |
| &pmi8998_wled { |
| status = "okay"; |
| qcom,led-strings-list = [01 02]; |
| }; |
| |
| &mdss_mdp { |
| connectors = <&sde_rscc &sde_wb &dsi_sharp_4k_dsc_video_display>; |
| }; |
| |
| &dsi_sharp_4k_dsc_video { |
| qcom,panel-supply-entries = <&dsi_panel_pwr_supply>; |
| qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled"; |
| qcom,mdss-dsi-bl-min-level = <1>; |
| qcom,mdss-dsi-bl-max-level = <4095>; |
| qcom,mdss-dsi-panel-mode-gpio-state = "dual_port"; |
| qcom,panel-mode-gpio = <&tlmm 52 0>; |
| qcom,platform-te-gpio = <&tlmm 10 0>; |
| qcom,platform-reset-gpio = <&tlmm 6 0>; |
| qcom,mdss-dsi-panel-orientation = "180"; |
| }; |
| |
| &dsi_sharp_4k_dsc_video_display { |
| qcom,dsi-display-active; |
| }; |
| |
| &wil6210 { |
| status = "ok"; |
| }; |