pwm: Add the pwm_is_enabled() helper
Some PWM drivers are testing the PWMF_ENABLED flag. Create a helper
function to hide the logic behind enabled test. This will allow us to
smoothly move from the current approach to an atomic PWM update
approach.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
diff --git a/drivers/pwm/core.c b/drivers/pwm/core.c
index 3a7769f..f7c11d2 100644
--- a/drivers/pwm/core.c
+++ b/drivers/pwm/core.c
@@ -455,7 +455,7 @@
if (!pwm->chip->ops->set_polarity)
return -ENOSYS;
- if (test_bit(PWMF_ENABLED, &pwm->flags))
+ if (pwm_is_enabled(pwm))
return -EBUSY;
err = pwm->chip->ops->set_polarity(pwm->chip, pwm, polarity);
@@ -853,7 +853,7 @@
if (test_bit(PWMF_REQUESTED, &pwm->flags))
seq_puts(s, " requested");
- if (test_bit(PWMF_ENABLED, &pwm->flags))
+ if (pwm_is_enabled(pwm))
seq_puts(s, " enabled");
seq_puts(s, "\n");
diff --git a/drivers/pwm/pwm-atmel-tcb.c b/drivers/pwm/pwm-atmel-tcb.c
index d14e067..6da01b3 100644
--- a/drivers/pwm/pwm-atmel-tcb.c
+++ b/drivers/pwm/pwm-atmel-tcb.c
@@ -347,7 +347,7 @@
tcbpwm->duty = duty;
/* If the PWM is enabled, call enable to apply the new conf */
- if (test_bit(PWMF_ENABLED, &pwm->flags))
+ if (pwm_is_enabled(pwm))
atmel_tcb_pwm_enable(chip, pwm);
return 0;
diff --git a/drivers/pwm/pwm-atmel.c b/drivers/pwm/pwm-atmel.c
index a947c90..b3b294d 100644
--- a/drivers/pwm/pwm-atmel.c
+++ b/drivers/pwm/pwm-atmel.c
@@ -114,7 +114,7 @@
u32 val;
int ret;
- if (test_bit(PWMF_ENABLED, &pwm->flags) && (period_ns != pwm->period)) {
+ if (pwm_is_enabled(pwm) && (period_ns != pwm->period)) {
dev_err(chip->dev, "cannot change PWM period while enabled\n");
return -EBUSY;
}
@@ -176,7 +176,7 @@
* If the PWM channel is enabled, only update CDTY by using the update
* register, it needs to set bit 10 of CMR to 0
*/
- if (test_bit(PWMF_ENABLED, &pwm->flags))
+ if (pwm_is_enabled(pwm))
return;
/*
* If the PWM channel is disabled, write value to duty and period
@@ -191,7 +191,7 @@
{
struct atmel_pwm_chip *atmel_pwm = to_atmel_pwm_chip(chip);
- if (test_bit(PWMF_ENABLED, &pwm->flags)) {
+ if (pwm_is_enabled(pwm)) {
/*
* If the PWM channel is enabled, using the duty update register
* to update the value.
diff --git a/drivers/pwm/pwm-bcm-kona.c b/drivers/pwm/pwm-bcm-kona.c
index 7af8fea..dfdcf88 100644
--- a/drivers/pwm/pwm-bcm-kona.c
+++ b/drivers/pwm/pwm-bcm-kona.c
@@ -134,7 +134,7 @@
}
/* If the PWM channel is enabled, write the settings to the HW */
- if (test_bit(PWMF_ENABLED, &pwm->flags)) {
+ if (pwm_is_enabled(pwm)) {
value = readl(kp->base + PRESCALE_OFFSET);
value &= ~PRESCALE_MASK(chan);
value |= prescale << PRESCALE_SHIFT(chan);
@@ -287,7 +287,7 @@
unsigned int chan;
for (chan = 0; chan < kp->chip.npwm; chan++)
- if (test_bit(PWMF_ENABLED, &kp->chip.pwms[chan].flags))
+ if (pwm_is_enabled(&kp->chip.pwms[chan]))
clk_disable_unprepare(kp->clk);
return pwmchip_remove(&kp->chip);
diff --git a/drivers/pwm/pwm-ep93xx.c b/drivers/pwm/pwm-ep93xx.c
index e593e9c..bbf10ae 100644
--- a/drivers/pwm/pwm-ep93xx.c
+++ b/drivers/pwm/pwm-ep93xx.c
@@ -82,7 +82,7 @@
* The clock needs to be enabled to access the PWM registers.
* Configuration can be changed at any time.
*/
- if (!test_bit(PWMF_ENABLED, &pwm->flags)) {
+ if (!pwm_is_enabled(pwm)) {
ret = clk_enable(ep93xx_pwm->clk);
if (ret)
return ret;
@@ -113,7 +113,7 @@
ret = -EINVAL;
}
- if (!test_bit(PWMF_ENABLED, &pwm->flags))
+ if (!pwm_is_enabled(pwm))
clk_disable(ep93xx_pwm->clk);
return ret;
diff --git a/drivers/pwm/pwm-imx.c b/drivers/pwm/pwm-imx.c
index 66d6f0c..008dc64 100644
--- a/drivers/pwm/pwm-imx.c
+++ b/drivers/pwm/pwm-imx.c
@@ -114,7 +114,7 @@
unsigned long long c;
unsigned long period_cycles, duty_cycles, prescale;
unsigned int period_ms;
- bool enable = test_bit(PWMF_ENABLED, &pwm->flags);
+ bool enable = pwm_is_enabled(pwm);
int wait_count = 0, fifoav;
u32 cr, sr;
diff --git a/drivers/pwm/pwm-mxs.c b/drivers/pwm/pwm-mxs.c
index b430811..9a59632 100644
--- a/drivers/pwm/pwm-mxs.c
+++ b/drivers/pwm/pwm-mxs.c
@@ -77,7 +77,7 @@
* If the PWM channel is disabled, make sure to turn on the clock
* before writing the register. Otherwise, keep it enabled.
*/
- if (!test_bit(PWMF_ENABLED, &pwm->flags)) {
+ if (!pwm_is_enabled(pwm)) {
ret = clk_prepare_enable(mxs->clk);
if (ret)
return ret;
@@ -92,7 +92,7 @@
/*
* If the PWM is not enabled, turn the clock off again to save power.
*/
- if (!test_bit(PWMF_ENABLED, &pwm->flags))
+ if (!pwm_is_enabled(pwm))
clk_disable_unprepare(mxs->clk);
return 0;
diff --git a/drivers/pwm/pwm-renesas-tpu.c b/drivers/pwm/pwm-renesas-tpu.c
index ee63f9e..075c1a76 100644
--- a/drivers/pwm/pwm-renesas-tpu.c
+++ b/drivers/pwm/pwm-renesas-tpu.c
@@ -301,7 +301,7 @@
pwm->duty = duty;
/* If the channel is disabled we're done. */
- if (!test_bit(PWMF_ENABLED, &_pwm->flags))
+ if (!pwm_is_enabled(_pwm))
return 0;
if (duty_only && pwm->timer_on) {
diff --git a/drivers/pwm/pwm-tegra.c b/drivers/pwm/pwm-tegra.c
index cabd7d8..d4de060 100644
--- a/drivers/pwm/pwm-tegra.c
+++ b/drivers/pwm/pwm-tegra.c
@@ -112,7 +112,7 @@
* If the PWM channel is disabled, make sure to turn on the clock
* before writing the register. Otherwise, keep it enabled.
*/
- if (!test_bit(PWMF_ENABLED, &pwm->flags)) {
+ if (!pwm_is_enabled(pwm)) {
err = clk_prepare_enable(pc->clk);
if (err < 0)
return err;
@@ -124,7 +124,7 @@
/*
* If the PWM is not enabled, turn the clock off again to save power.
*/
- if (!test_bit(PWMF_ENABLED, &pwm->flags))
+ if (!pwm_is_enabled(pwm))
clk_disable_unprepare(pc->clk);
return 0;
@@ -214,7 +214,7 @@
for (i = 0; i < NUM_PWM; i++) {
struct pwm_device *pwm = &pc->chip.pwms[i];
- if (!test_bit(PWMF_ENABLED, &pwm->flags))
+ if (!pwm_is_enabled(pwm))
if (clk_prepare_enable(pc->clk) < 0)
continue;
diff --git a/drivers/pwm/pwm-tiecap.c b/drivers/pwm/pwm-tiecap.c
index e557bef..616af76 100644
--- a/drivers/pwm/pwm-tiecap.c
+++ b/drivers/pwm/pwm-tiecap.c
@@ -97,7 +97,7 @@
writew(reg_val, pc->mmio_base + ECCTL2);
- if (!test_bit(PWMF_ENABLED, &pwm->flags)) {
+ if (!pwm_is_enabled(pwm)) {
/* Update active registers if not running */
writel(duty_cycles, pc->mmio_base + CAP2);
writel(period_cycles, pc->mmio_base + CAP1);
@@ -111,7 +111,7 @@
writel(period_cycles, pc->mmio_base + CAP3);
}
- if (!test_bit(PWMF_ENABLED, &pwm->flags)) {
+ if (!pwm_is_enabled(pwm)) {
reg_val = readw(pc->mmio_base + ECCTL2);
/* Disable APWM mode to put APWM output Low */
reg_val &= ~ECCTL2_APWM_MODE;
@@ -179,7 +179,7 @@
static void ecap_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
{
- if (test_bit(PWMF_ENABLED, &pwm->flags)) {
+ if (pwm_is_enabled(pwm)) {
dev_warn(chip->dev, "Removing PWM device without disabling\n");
pm_runtime_put_sync(chip->dev);
}
@@ -306,7 +306,7 @@
ecap_pwm_save_context(pc);
/* Disable explicitly if PWM is running */
- if (test_bit(PWMF_ENABLED, &pwm->flags))
+ if (pwm_is_enabled(pwm))
pm_runtime_put_sync(dev);
return 0;
@@ -318,7 +318,7 @@
struct pwm_device *pwm = pc->chip.pwms;
/* Enable explicitly if PWM was running */
- if (test_bit(PWMF_ENABLED, &pwm->flags))
+ if (pwm_is_enabled(pwm))
pm_runtime_get_sync(dev);
ecap_pwm_restore_context(pc);
diff --git a/drivers/pwm/pwm-tiehrpwm.c b/drivers/pwm/pwm-tiehrpwm.c
index 694b3cf..6a41e66 100644
--- a/drivers/pwm/pwm-tiehrpwm.c
+++ b/drivers/pwm/pwm-tiehrpwm.c
@@ -407,7 +407,7 @@
{
struct ehrpwm_pwm_chip *pc = to_ehrpwm_pwm_chip(chip);
- if (test_bit(PWMF_ENABLED, &pwm->flags)) {
+ if (pwm_is_enabled(pwm)) {
dev_warn(chip->dev, "Removing PWM device without disabling\n");
pm_runtime_put_sync(chip->dev);
}
@@ -565,7 +565,7 @@
for (i = 0; i < pc->chip.npwm; i++) {
struct pwm_device *pwm = &pc->chip.pwms[i];
- if (!test_bit(PWMF_ENABLED, &pwm->flags))
+ if (!pwm_is_enabled(pwm))
continue;
/* Disable explicitly if PWM is running */
@@ -582,7 +582,7 @@
for (i = 0; i < pc->chip.npwm; i++) {
struct pwm_device *pwm = &pc->chip.pwms[i];
- if (!test_bit(PWMF_ENABLED, &pwm->flags))
+ if (!pwm_is_enabled(pwm))
continue;
/* Enable explicitly if PWM was running */
diff --git a/drivers/pwm/sysfs.c b/drivers/pwm/sysfs.c
index 4bd0c63..eecf21d 100644
--- a/drivers/pwm/sysfs.c
+++ b/drivers/pwm/sysfs.c
@@ -97,7 +97,7 @@
char *buf)
{
const struct pwm_device *pwm = child_to_pwm_device(child);
- int enabled = test_bit(PWMF_ENABLED, &pwm->flags);
+ int enabled = pwm_is_enabled(pwm);
return sprintf(buf, "%d\n", enabled);
}