ARM: do away with ARCH_[WANT_OPTIONAL|REQUIRE]_GPIOLIB
This replaces:
- "select ARCH_REQUIRE_GPIOLIB" with "select GPIOLIB" as this can
now be selected directly.
- "select ARCH_WANT_OPTIONAL_GPIOLIB" with no dependency: GPIOLIB
is now selectable by everyone, so we need not declare our
intent to select it.
When ordering the symbols the following rationale was used:
if the selects were in alphabetical order, I moved select GPIOLIB
to be in alphabetical order, but if the selects were not
maintained in alphabetical order, I just replaced
"select ARCH_REQUIRE_GPIOLIB" with "select GPIOLIB".
Cc: Michael Büsch <m@bues.ch>
Cc: arm@kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 90542db..a0af11b 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -327,7 +327,6 @@
config ARCH_MULTIPLATFORM
bool "Allow multiple platforms to be selected"
depends on MMU
- select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_HAS_SG_CHAIN
select ARM_PATCH_PHYS_VIRT
select AUTO_ZRELADDR
@@ -342,7 +341,6 @@
config ARM_SINGLE_ARMV7M
bool "ARMv7-M based platforms (Cortex-M0/M3/M4)"
depends on !MMU
- select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_NVIC
select AUTO_ZRELADDR
select CLKSRC_OF
@@ -356,12 +354,12 @@
config ARCH_CLPS711X
bool "Cirrus Logic CLPS711x/EP721x/EP731x-based"
- select ARCH_REQUIRE_GPIOLIB
select AUTO_ZRELADDR
select CLKSRC_MMIO
select COMMON_CLK
select CPU_ARM720T
select GENERIC_CLOCKEVENTS
+ select GPIOLIB
select MFD_SYSCON
select SOC_BUS
help
@@ -369,10 +367,10 @@
config ARCH_GEMINI
bool "Cortina Systems Gemini"
- select ARCH_REQUIRE_GPIOLIB
select CLKSRC_MMIO
select CPU_FA526
select GENERIC_CLOCKEVENTS
+ select GPIOLIB
help
Support for the Cortina Systems Gemini family SoCs
@@ -393,7 +391,6 @@
config ARCH_EP93XX
bool "EP93xx-based"
select ARCH_HAS_HOLES_MEMORYMODEL
- select ARCH_REQUIRE_GPIOLIB
select ARM_AMBA
select ARM_PATCH_PHYS_VIRT
select ARM_VIC
@@ -402,6 +399,7 @@
select CLKSRC_MMIO
select CPU_ARM920T
select GENERIC_CLOCKEVENTS
+ select GPIOLIB
help
This enables support for the Cirrus EP93xx series of CPUs.
@@ -442,9 +440,9 @@
config ARCH_IOP32X
bool "IOP32x-based"
depends on MMU
- select ARCH_REQUIRE_GPIOLIB
select CPU_XSCALE
select GPIO_IOP
+ select GPIOLIB
select NEED_RET_TO_USER
select PCI
select PLAT_IOP
@@ -455,9 +453,9 @@
config ARCH_IOP33X
bool "IOP33x-based"
depends on MMU
- select ARCH_REQUIRE_GPIOLIB
select CPU_XSCALE
select GPIO_IOP
+ select GPIOLIB
select NEED_RET_TO_USER
select PCI
select PLAT_IOP
@@ -468,12 +466,12 @@
bool "IXP4xx-based"
depends on MMU
select ARCH_HAS_DMA_SET_COHERENT_MASK
- select ARCH_REQUIRE_GPIOLIB
select ARCH_SUPPORTS_BIG_ENDIAN
select CLKSRC_MMIO
select CPU_XSCALE
select DMABOUNCE if PCI
select GENERIC_CLOCKEVENTS
+ select GPIOLIB
select MIGHT_HAVE_PCI
select NEED_MACH_IO_H
select USB_EHCI_BIG_ENDIAN_DESC
@@ -483,9 +481,9 @@
config ARCH_DOVE
bool "Marvell Dove"
- select ARCH_REQUIRE_GPIOLIB
select CPU_PJ4
select GENERIC_CLOCKEVENTS
+ select GPIOLIB
select MIGHT_HAVE_PCI
select MULTI_IRQ_HANDLER
select MVEBU_MBUS
@@ -499,10 +497,10 @@
config ARCH_KS8695
bool "Micrel/Kendin KS8695"
- select ARCH_REQUIRE_GPIOLIB
select CLKSRC_MMIO
select CPU_ARM922T
select GENERIC_CLOCKEVENTS
+ select GPIOLIB
select NEED_MACH_MEMORY_H
help
Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based
@@ -510,11 +508,11 @@
config ARCH_W90X900
bool "Nuvoton W90X900 CPU"
- select ARCH_REQUIRE_GPIOLIB
select CLKDEV_LOOKUP
select CLKSRC_MMIO
select CPU_ARM926T
select GENERIC_CLOCKEVENTS
+ select GPIOLIB
help
Support for Nuvoton (Winbond logic dept.) ARM9 processor,
At present, the w90x900 has been renamed nuc900, regarding
@@ -526,13 +524,13 @@
config ARCH_LPC32XX
bool "NXP LPC32XX"
- select ARCH_REQUIRE_GPIOLIB
select ARM_AMBA
select CLKDEV_LOOKUP
select CLKSRC_LPC32XX
select COMMON_CLK
select CPU_ARM926T
select GENERIC_CLOCKEVENTS
+ select GPIOLIB
select MULTI_IRQ_HANDLER
select SPARSE_IRQ
select USE_OF
@@ -543,7 +541,6 @@
bool "PXA2xx/PXA3xx-based"
depends on MMU
select ARCH_MTD_XIP
- select ARCH_REQUIRE_GPIOLIB
select ARM_CPU_SUSPEND if PM
select AUTO_ZRELADDR
select COMMON_CLK
@@ -554,6 +551,7 @@
select CPU_XSCALE if !CPU_XSC3
select GENERIC_CLOCKEVENTS
select GPIO_PXA
+ select GPIOLIB
select HAVE_IDE
select IRQ_DOMAIN
select MULTI_IRQ_HANDLER
@@ -584,7 +582,6 @@
config ARCH_SA1100
bool "SA1100-based"
select ARCH_MTD_XIP
- select ARCH_REQUIRE_GPIOLIB
select ARCH_SPARSEMEM_ENABLE
select CLKDEV_LOOKUP
select CLKSRC_MMIO
@@ -593,6 +590,7 @@
select CPU_FREQ
select CPU_SA1100
select GENERIC_CLOCKEVENTS
+ select GPIOLIB
select HAVE_IDE
select IRQ_DOMAIN
select ISA
@@ -604,12 +602,12 @@
config ARCH_S3C24XX
bool "Samsung S3C24XX SoCs"
- select ARCH_REQUIRE_GPIOLIB
select ATAGS
select CLKDEV_LOOKUP
select CLKSRC_SAMSUNG_PWM
select GENERIC_CLOCKEVENTS
select GPIO_SAMSUNG
+ select GPIOLIB
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C2410_WATCHDOG if WATCHDOG
select HAVE_S3C_RTC if RTC_CLASS
@@ -625,12 +623,12 @@
config ARCH_DAVINCI
bool "TI DaVinci"
select ARCH_HAS_HOLES_MEMORYMODEL
- select ARCH_REQUIRE_GPIOLIB
select CLKDEV_LOOKUP
select CPU_ARM926T
select GENERIC_ALLOCATOR
select GENERIC_CLOCKEVENTS
select GENERIC_IRQ_CHIP
+ select GPIOLIB
select HAVE_IDE
select USE_OF
select ZONE_DMA
@@ -642,11 +640,11 @@
depends on MMU
select ARCH_HAS_HOLES_MEMORYMODEL
select ARCH_OMAP
- select ARCH_REQUIRE_GPIOLIB
select CLKDEV_LOOKUP
select CLKSRC_MMIO
select GENERIC_CLOCKEVENTS
select GENERIC_IRQ_CHIP
+ select GPIOLIB
select HAVE_IDE
select IRQ_DOMAIN
select MULTI_IRQ_HANDLER
@@ -868,7 +866,7 @@
config ARCH_EFM32
bool "Energy Micro efm32"
depends on ARM_SINGLE_ARMV7M
- select ARCH_REQUIRE_GPIOLIB
+ select GPIOLIB
help
Support for Energy Micro's (now Silicon Labs) efm32 Giant Gecko
processors.