| #include <linux/module.h> |
| #include <linux/sched.h> |
| #include <linux/ctype.h> |
| #include <linux/fd.h> |
| #include <linux/tty.h> |
| #include <linux/suspend.h> |
| #include <linux/root_dev.h> |
| #include <linux/security.h> |
| #include <linux/delay.h> |
| #include <linux/genhd.h> |
| #include <linux/mount.h> |
| #include <linux/device.h> |
| #include <linux/init.h> |
| #include <linux/fs.h> |
| #include <linux/initrd.h> |
| #include <linux/async.h> |
| #include <linux/fs_struct.h> |
| #include <linux/slab.h> |
| |
| #include <linux/nfs_fs.h> |
| #include <linux/nfs_fs_sb.h> |
| #include <linux/nfs_mount.h> |
| |
| #include "do_mounts.h" |
| |
| int __initdata rd_doload; /* 1 = load RAM disk, 0 = don't load */ |
| |
| int root_mountflags = MS_RDONLY | MS_SILENT; |
| static char * __initdata root_device_name; |
| static char __initdata saved_root_name[64]; |
| static int __initdata root_wait; |
| |
| dev_t ROOT_DEV; |
| |
| static int __init load_ramdisk(char *str) |
| { |
| rd_doload = simple_strtol(str,NULL,0) & 3; |
| return 1; |
| } |
| __setup("load_ramdisk=", load_ramdisk); |
| |
| static int __init readonly(char *str) |
| { |
| if (*str) |
| return 0; |
| root_mountflags |= MS_RDONLY; |
| return 1; |
| } |
| |
| static int __init readwrite(char *str) |
| { |
| if (*str) |
| return 0; |
| root_mountflags &= ~MS_RDONLY; |
| return 1; |
| } |
| |
| __setup("ro", readonly); |
| __setup("rw", readwrite); |
| |
| /* |
| * Convert a name into device number. We accept the following variants: |
| * |
| * 1) device number in hexadecimal represents itself |
| * 2) /dev/nfs represents Root_NFS (0xff) |
| * 3) /dev/<disk_name> represents the device number of disk |
| * 4) /dev/<disk_name><decimal> represents the device number |
| * of partition - device number of disk plus the partition number |
| * 5) /dev/<disk_name>p<decimal> - same as the above, that form is |
| * used when disk name of partitioned disk ends on a digit. |
| * |
| * If name doesn't have fall into the categories above, we return (0,0). |
| * block_class is used to check if something is a disk name. If the disk |
| * name contains slashes, the device name has them replaced with |
| * bangs. |
| */ |
| |
| dev_t name_to_dev_t(char *name) |
| { |
| char s[32]; |
| char *p; |
| dev_t res = 0; |
| int part; |
| |
| if (strncmp(name, "/dev/", 5) != 0) { |
| unsigned maj, min; |
| |
| if (sscanf(name, "%u:%u", &maj, &min) == 2) { |
| res = MKDEV(maj, min); |
| if (maj != MAJOR(res) || min != MINOR(res)) |
| goto fail; |
| } else { |
| res = new_decode_dev(simple_strtoul(name, &p, 16)); |
| if (*p) |
| goto fail; |
| } |
| goto done; |
| } |
| |
| name += 5; |
| res = Root_NFS; |
| if (strcmp(name, "nfs") == 0) |
| goto done; |
| res = Root_RAM0; |
| if (strcmp(name, "ram") == 0) |
| goto done; |
| |
| if (strlen(name) > 31) |
| goto fail; |
| strcpy(s, name); |
| for (p = s; *p; p++) |
| if (*p == '/') |
| *p = '!'; |
| res = blk_lookup_devt(s, 0); |
| if (res) |
| goto done; |
| |
| /* |
| * try non-existant, but valid partition, which may only exist |
| * after revalidating the disk, like partitioned md devices |
| */ |
| while (p > s && isdigit(p[-1])) |
| p--; |
| if (p == s || !*p || *p == '0') |
| goto fail; |
| |
| /* try disk name without <part number> */ |
| part = simple_strtoul(p, NULL, 10); |
| *p = '\0'; |
| res = blk_lookup_devt(s, part); |
| if (res) |
| goto done; |
| |
| /* try disk name without p<part number> */ |
| if (p < s + 2 || !isdigit(p[-2]) || p[-1] != 'p') |
| goto fail; |
| p[-1] = '\0'; |
| res = blk_lookup_devt(s, part); |
| if (res) |
| goto done; |
| |
| fail: |
| return 0; |
| done: |
| return res; |
| } |
| |
| static int __init root_dev_setup(char *line) |
| { |
| strlcpy(saved_root_name, line, sizeof(saved_root_name)); |
| return 1; |
| } |
| |
| __setup("root=", root_dev_setup); |
| |
| static int __init rootwait_setup(char *str) |
| { |
| if (*str) |
| return 0; |
| root_wait = 1; |
| return 1; |
| } |
| |
| __setup("rootwait", rootwait_setup); |
| |
| static char * __initdata root_mount_data; |
| static int __init root_data_setup(char *str) |
| { |
| root_mount_data = str; |
| return 1; |
| } |
| |
| static char * __initdata root_fs_names; |
| static int __init fs_names_setup(char *str) |
| { |
| root_fs_names = str; |
| return 1; |
| } |
| |
| static unsigned int __initdata root_delay; |
| static int __init root_delay_setup(char *str) |
| { |
| root_delay = simple_strtoul(str, NULL, 0); |
| return 1; |
| } |
| |
| __setup("rootflags=", root_data_setup); |
| __setup("rootfstype=", fs_names_setup); |
| __setup("rootdelay=", root_delay_setup); |
| |
| static void __init get_fs_names(char *page) |
| { |
| char *s = page; |
| |
| if (root_fs_names) { |
| strcpy(page, root_fs_names); |
| while (*s++) { |
| if (s[-1] == ',') |
| s[-1] = '\0'; |
| } |
| } else { |
| int len = get_filesystem_list(page); |
| char *p, *next; |
| |
| page[len] = '\0'; |
| for (p = page-1; p; p = next) { |
| next = strchr(++p, '\n'); |
| if (*p++ != '\t') |
| continue; |
| while ((*s++ = *p++) != '\n') |
| ; |
| s[-1] = '\0'; |
| } |
| } |
| *s = '\0'; |
| } |
| |
| static int __init do_mount_root(char *name, char *fs, int flags, void *data) |
| { |
| int err = sys_mount(name, "/root", fs, flags, data); |
| if (err) |
| return err; |
| |
| sys_chdir("/root"); |
| ROOT_DEV = current->fs->pwd.mnt->mnt_sb->s_dev; |
| printk("VFS: Mounted root (%s filesystem)%s on device %u:%u.\n", |
| current->fs->pwd.mnt->mnt_sb->s_type->name, |
| current->fs->pwd.mnt->mnt_sb->s_flags & MS_RDONLY ? |
| " readonly" : "", MAJOR(ROOT_DEV), MINOR(ROOT_DEV)); |
| return 0; |
| } |
| |
| void __init mount_block_root(char *name, int flags) |
| { |
| char *fs_names = __getname_gfp(GFP_KERNEL |
| | __GFP_NOTRACK_FALSE_POSITIVE); |
| char *p; |
| #ifdef CONFIG_BLOCK |
| char b[BDEVNAME_SIZE]; |
| #else |
| const char *b = name; |
| #endif |
| |
| get_fs_names(fs_names); |
| retry: |
| for (p = fs_names; *p; p += strlen(p)+1) { |
| int err = do_mount_root(name, p, flags, root_mount_data); |
| switch (err) { |
| case 0: |
| goto out; |
| case -EACCES: |
| flags |= MS_RDONLY; |
| goto retry; |
| case -EINVAL: |
| continue; |
| } |
| /* |
| * Allow the user to distinguish between failed sys_open |
| * and bad superblock on root device. |
| * and give them a list of the available devices |
| */ |
| #ifdef CONFIG_BLOCK |
| __bdevname(ROOT_DEV, b); |
| #endif |
| printk("VFS: Cannot open root device \"%s\" or %s\n", |
| root_device_name, b); |
| printk("Please append a correct \"root=\" boot option; here are the available partitions:\n"); |
| |
| printk_all_partitions(); |
| #ifdef CONFIG_DEBUG_BLOCK_EXT_DEVT |
| printk("DEBUG_BLOCK_EXT_DEVT is enabled, you need to specify " |
| "explicit textual name for \"root=\" boot option.\n"); |
| #endif |
| panic("VFS: Unable to mount root fs on %s", b); |
| } |
| |
| printk("List of all partitions:\n"); |
| printk_all_partitions(); |
| printk("No filesystem could mount root, tried: "); |
| for (p = fs_names; *p; p += strlen(p)+1) |
| printk(" %s", p); |
| printk("\n"); |
| #ifdef CONFIG_BLOCK |
| __bdevname(ROOT_DEV, b); |
| #endif |
| panic("VFS: Unable to mount root fs on %s", b); |
| out: |
| putname(fs_names); |
| } |
| |
| #ifdef CONFIG_ROOT_NFS |
| static int __init mount_nfs_root(void) |
| { |
| char *root_dev, *root_data; |
| |
| if (nfs_root_data(&root_dev, &root_data) != 0) |
| return 0; |
| if (do_mount_root(root_dev, "nfs", root_mountflags, root_data) != 0) |
| return 0; |
| return 1; |
| } |
| #endif |
| |
| #if defined(CONFIG_BLK_DEV_RAM) || defined(CONFIG_BLK_DEV_FD) |
| void __init change_floppy(char *fmt, ...) |
| { |
| struct termios termios; |
| char buf[80]; |
| char c; |
| int fd; |
| va_list args; |
| va_start(args, fmt); |
| vsprintf(buf, fmt, args); |
| va_end(args); |
| fd = sys_open("/dev/root", O_RDWR | O_NDELAY, 0); |
| if (fd >= 0) { |
| sys_ioctl(fd, FDEJECT, 0); |
| sys_close(fd); |
| } |
| printk(KERN_NOTICE "VFS: Insert %s and press ENTER\n", buf); |
| fd = sys_open("/dev/console", O_RDWR, 0); |
| if (fd >= 0) { |
| sys_ioctl(fd, TCGETS, (long)&termios); |
| termios.c_lflag &= ~ICANON; |
| sys_ioctl(fd, TCSETSF, (long)&termios); |
| sys_read(fd, &c, 1); |
| termios.c_lflag |= ICANON; |
| sys_ioctl(fd, TCSETSF, (long)&termios); |
| sys_close(fd); |
| } |
| } |
| #endif |
| |
| void __init mount_root(void) |
| { |
| #ifdef CONFIG_ROOT_NFS |
| if (MAJOR(ROOT_DEV) == UNNAMED_MAJOR) { |
| if (mount_nfs_root()) |
| return; |
| |
| printk(KERN_ERR "VFS: Unable to mount root fs via NFS, trying floppy.\n"); |
| ROOT_DEV = Root_FD0; |
| } |
| #endif |
| #ifdef CONFIG_BLK_DEV_FD |
| if (MAJOR(ROOT_DEV) == FLOPPY_MAJOR) { |
| /* rd_doload is 2 for a dual initrd/ramload setup */ |
| if (rd_doload==2) { |
| if (rd_load_disk(1)) { |
| ROOT_DEV = Root_RAM1; |
| root_device_name = NULL; |
| } |
| } else |
| change_floppy("root floppy"); |
| } |
| #endif |
| #ifdef CONFIG_BLOCK |
| create_dev("/dev/root", ROOT_DEV); |
| mount_block_root("/dev/root", root_mountflags); |
| #endif |
| } |
| |
| /* |
| * Prepare the namespace - decide what/where to mount, load ramdisks, etc. |
| */ |
| void __init prepare_namespace(void) |
| { |
| int is_floppy; |
| |
| if (root_delay) { |
| printk(KERN_INFO "Waiting %dsec before mounting root device...\n", |
| root_delay); |
| ssleep(root_delay); |
| } |
| |
| /* |
| * wait for the known devices to complete their probing |
| * |
| * Note: this is a potential source of long boot delays. |
| * For example, it is not atypical to wait 5 seconds here |
| * for the touchpad of a laptop to initialize. |
| */ |
| wait_for_device_probe(); |
| |
| md_run_setup(); |
| |
| if (saved_root_name[0]) { |
| root_device_name = saved_root_name; |
| if (!strncmp(root_device_name, "mtd", 3) || |
| !strncmp(root_device_name, "ubi", 3)) { |
| mount_block_root(root_device_name, root_mountflags); |
| goto out; |
| } |
| ROOT_DEV = name_to_dev_t(root_device_name); |
| if (strncmp(root_device_name, "/dev/", 5) == 0) |
| root_device_name += 5; |
| } |
| |
| if (initrd_load()) |
| goto out; |
| |
| /* wait for any asynchronous scanning to complete */ |
| if ((ROOT_DEV == 0) && root_wait) { |
| printk(KERN_INFO "Waiting for root device %s...\n", |
| saved_root_name); |
| while (driver_probe_done() != 0 || |
| (ROOT_DEV = name_to_dev_t(saved_root_name)) == 0) |
| msleep(100); |
| async_synchronize_full(); |
| } |
| |
| is_floppy = MAJOR(ROOT_DEV) == FLOPPY_MAJOR; |
| |
| if (is_floppy && rd_doload && rd_load_disk(0)) |
| ROOT_DEV = Root_RAM0; |
| |
| mount_root(); |
| out: |
| devtmpfs_mount("dev"); |
| sys_mount(".", "/", NULL, MS_MOVE, NULL); |
| sys_chroot("."); |
| } |