diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index cfbee4d..d34ff40 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -147,7 +147,8 @@
 		return;
 
 	if (request->request.dma == DMA_ADDR_INVALID) {
-		DBG(20, "not unmapping a never mapped buffer\n");
+		dev_vdbg(musb->controller,
+				"not unmapping a never mapped buffer\n");
 		return;
 	}
 	if (request->map_state == MUSB_MAPPED) {
@@ -198,11 +199,11 @@
 	spin_unlock(&musb->lock);
 	unmap_dma_buffer(req, musb);
 	if (request->status == 0)
-		DBG(5, "%s done request %p,  %d/%d\n",
+		dev_dbg(musb->controller, "%s done request %p,  %d/%d\n",
 				ep->end_point.name, request,
 				req->request.actual, req->request.length);
 	else
-		DBG(2, "%s request %p, %d/%d fault %d\n",
+		dev_dbg(musb->controller, "%s request %p, %d/%d fault %d\n",
 				ep->end_point.name, request,
 				req->request.actual, req->request.length,
 				request->status);
@@ -219,6 +220,7 @@
  */
 static void nuke(struct musb_ep *ep, const int status)
 {
+	struct musb		*musb = ep->musb;
 	struct musb_request	*req = NULL;
 	void __iomem *epio = ep->musb->endpoints[ep->current_epnum].regs;
 
@@ -246,7 +248,8 @@
 		}
 
 		value = c->channel_abort(ep->dma);
-		DBG(value ? 1 : 6, "%s: abort DMA --> %d\n", ep->name, value);
+		dev_dbg(musb->controller, "%s: abort DMA --> %d\n",
+				ep->name, value);
 		c->channel_release(ep->dma);
 		ep->dma = NULL;
 	}
@@ -329,7 +332,7 @@
 
 	/* we shouldn't get here while DMA is active ... but we do ... */
 	if (dma_channel_status(musb_ep->dma) == MUSB_DMA_STATUS_BUSY) {
-		DBG(4, "dma pending...\n");
+		dev_dbg(musb->controller, "dma pending...\n");
 		return;
 	}
 
@@ -341,18 +344,18 @@
 			(int)(request->length - request->actual));
 
 	if (csr & MUSB_TXCSR_TXPKTRDY) {
-		DBG(5, "%s old packet still ready , txcsr %03x\n",
+		dev_dbg(musb->controller, "%s old packet still ready , txcsr %03x\n",
 				musb_ep->end_point.name, csr);
 		return;
 	}
 
 	if (csr & MUSB_TXCSR_P_SENDSTALL) {
-		DBG(5, "%s stalling, txcsr %03x\n",
+		dev_dbg(musb->controller, "%s stalling, txcsr %03x\n",
 				musb_ep->end_point.name, csr);
 		return;
 	}
 
-	DBG(4, "hw_ep%d, maxpacket %d, fifo count %d, txcsr %03x\n",
+	dev_dbg(musb->controller, "hw_ep%d, maxpacket %d, fifo count %d, txcsr %03x\n",
 			epnum, musb_ep->packet_sz, fifo_count,
 			csr);
 
@@ -469,7 +472,7 @@
 	}
 
 	/* host may already have the data when this message shows... */
-	DBG(3, "%s TX/IN %s len %d/%d, txcsr %04x, fifo %d/%d\n",
+	dev_dbg(musb->controller, "%s TX/IN %s len %d/%d, txcsr %04x, fifo %d/%d\n",
 			musb_ep->end_point.name, use_dma ? "dma" : "pio",
 			request->actual, request->length,
 			musb_readw(epio, MUSB_TXCSR),
@@ -496,7 +499,7 @@
 	request = &req->request;
 
 	csr = musb_readw(epio, MUSB_TXCSR);
-	DBG(4, "<== %s, txcsr %04x\n", musb_ep->end_point.name, csr);
+	dev_dbg(musb->controller, "<== %s, txcsr %04x\n", musb_ep->end_point.name, csr);
 
 	dma = is_dma_capable() ? musb_ep->dma : NULL;
 
@@ -516,7 +519,8 @@
 		csr |=	 MUSB_TXCSR_P_WZC_BITS;
 		csr &= ~(MUSB_TXCSR_P_UNDERRUN | MUSB_TXCSR_TXPKTRDY);
 		musb_writew(epio, MUSB_TXCSR, csr);
-		DBG(20, "underrun on ep%d, req %p\n", epnum, request);
+		dev_vdbg(musb->controller, "underrun on ep%d, req %p\n",
+				epnum, request);
 	}
 
 	if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) {
@@ -524,7 +528,7 @@
 		 * SHOULD NOT HAPPEN... has with CPPI though, after
 		 * changing SENDSTALL (and other cases); harmless?
 		 */
-		DBG(5, "%s dma still busy?\n", musb_ep->end_point.name);
+		dev_dbg(musb->controller, "%s dma still busy?\n", musb_ep->end_point.name);
 		return;
 	}
 
@@ -540,7 +544,7 @@
 			/* Ensure writebuffer is empty. */
 			csr = musb_readw(epio, MUSB_TXCSR);
 			request->actual += musb_ep->dma->actual_len;
-			DBG(4, "TXCSR%d %04x, DMA off, len %zu, req %p\n",
+			dev_dbg(musb->controller, "TXCSR%d %04x, DMA off, len %zu, req %p\n",
 				epnum, csr, musb_ep->dma->actual_len, request);
 		}
 
@@ -564,7 +568,7 @@
 			if (csr & MUSB_TXCSR_TXPKTRDY)
 				return;
 
-			DBG(4, "sending zero pkt\n");
+			dev_dbg(musb->controller, "sending zero pkt\n");
 			musb_writew(epio, MUSB_TXCSR, MUSB_TXCSR_MODE
 					| MUSB_TXCSR_TXPKTRDY);
 			request->zero = 0;
@@ -574,7 +578,7 @@
 			musb_g_giveback(musb_ep, request, 0);
 			req = musb_ep->desc ? next_request(musb_ep) : NULL;
 			if (!req) {
-				DBG(4, "%s idle now\n",
+				dev_dbg(musb->controller, "%s idle now\n",
 					musb_ep->end_point.name);
 				return;
 			}
@@ -640,12 +644,12 @@
 
 	/* We shouldn't get here while DMA is active, but we do... */
 	if (dma_channel_status(musb_ep->dma) == MUSB_DMA_STATUS_BUSY) {
-		DBG(4, "DMA pending...\n");
+		dev_dbg(musb->controller, "DMA pending...\n");
 		return;
 	}
 
 	if (csr & MUSB_RXCSR_P_SENDSTALL) {
-		DBG(5, "%s stalling, RXCSR %04x\n",
+		dev_dbg(musb->controller, "%s stalling, RXCSR %04x\n",
 		    musb_ep->end_point.name, csr);
 		return;
 	}
@@ -757,7 +761,7 @@
 #endif	/* Mentor's DMA */
 
 			fifo_count = request->length - request->actual;
-			DBG(3, "%s OUT/RX pio fifo %d/%d, maxpacket %d\n",
+			dev_dbg(musb->controller, "%s OUT/RX pio fifo %d/%d, maxpacket %d\n",
 					musb_ep->end_point.name,
 					len, fifo_count,
 					musb_ep->packet_sz);
@@ -846,7 +850,7 @@
 	csr = musb_readw(epio, MUSB_RXCSR);
 	dma = is_dma_capable() ? musb_ep->dma : NULL;
 
-	DBG(4, "<== %s, rxcsr %04x%s %p\n", musb_ep->end_point.name,
+	dev_dbg(musb->controller, "<== %s, rxcsr %04x%s %p\n", musb_ep->end_point.name,
 			csr, dma ? " (dma)" : "", request);
 
 	if (csr & MUSB_RXCSR_P_SENTSTALL) {
@@ -861,19 +865,18 @@
 		csr &= ~MUSB_RXCSR_P_OVERRUN;
 		musb_writew(epio, MUSB_RXCSR, csr);
 
-		DBG(3, "%s iso overrun on %p\n", musb_ep->name, request);
+		dev_dbg(musb->controller, "%s iso overrun on %p\n", musb_ep->name, request);
 		if (request->status == -EINPROGRESS)
 			request->status = -EOVERFLOW;
 	}
 	if (csr & MUSB_RXCSR_INCOMPRX) {
 		/* REVISIT not necessarily an error */
-		DBG(4, "%s, incomprx\n", musb_ep->end_point.name);
+		dev_dbg(musb->controller, "%s, incomprx\n", musb_ep->end_point.name);
 	}
 
 	if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) {
 		/* "should not happen"; likely RXPKTRDY pending for DMA */
-		DBG((csr & MUSB_RXCSR_DMAENAB) ? 4 : 1,
-			"%s busy, csr %04x\n",
+		dev_dbg(musb->controller, "%s busy, csr %04x\n",
 			musb_ep->end_point.name, csr);
 		return;
 	}
@@ -887,7 +890,7 @@
 
 		request->actual += musb_ep->dma->actual_len;
 
-		DBG(4, "RXCSR%d %04x, dma off, %04x, len %zu, req %p\n",
+		dev_dbg(musb->controller, "RXCSR%d %04x, dma off, %04x, len %zu, req %p\n",
 			epnum, csr,
 			musb_readw(epio, MUSB_RXCSR),
 			musb_ep->dma->actual_len, request);
@@ -978,7 +981,7 @@
 			ok = musb->hb_iso_rx;
 
 		if (!ok) {
-			DBG(4, "no support for high bandwidth ISO\n");
+			dev_dbg(musb->controller, "no support for high bandwidth ISO\n");
 			goto fail;
 		}
 		musb_ep->hb_mult = (tmp >> 11) & 3;
@@ -1002,7 +1005,7 @@
 			goto fail;
 
 		if (tmp > hw_ep->max_packet_sz_tx) {
-			DBG(4, "packet size beyond hardware FIFO size\n");
+			dev_dbg(musb->controller, "packet size beyond hardware FIFO size\n");
 			goto fail;
 		}
 
@@ -1042,7 +1045,7 @@
 			goto fail;
 
 		if (tmp > hw_ep->max_packet_sz_rx) {
-			DBG(4, "packet size beyond hardware FIFO size\n");
+			dev_dbg(musb->controller, "packet size beyond hardware FIFO size\n");
 			goto fail;
 		}
 
@@ -1155,7 +1158,7 @@
 
 	spin_unlock_irqrestore(&(musb->lock), flags);
 
-	DBG(2, "%s\n", musb_ep->end_point.name);
+	dev_dbg(musb->controller, "%s\n", musb_ep->end_point.name);
 
 	return status;
 }
@@ -1167,11 +1170,12 @@
 struct usb_request *musb_alloc_request(struct usb_ep *ep, gfp_t gfp_flags)
 {
 	struct musb_ep		*musb_ep = to_musb_ep(ep);
+	struct musb		*musb = musb_ep->musb;
 	struct musb_request	*request = NULL;
 
 	request = kzalloc(sizeof *request, gfp_flags);
 	if (!request) {
-		DBG(4, "not enough memory\n");
+		dev_dbg(musb->controller, "not enough memory\n");
 		return NULL;
 	}
 
@@ -1205,7 +1209,7 @@
  */
 void musb_ep_restart(struct musb *musb, struct musb_request *req)
 {
-	DBG(3, "<== %s request %p len %u on hw_ep%d\n",
+	dev_dbg(musb->controller, "<== %s request %p len %u on hw_ep%d\n",
 		req->tx ? "TX/IN" : "RX/OUT",
 		&req->request, req->request.length, req->epnum);
 
@@ -1239,7 +1243,7 @@
 	if (request->ep != musb_ep)
 		return -EINVAL;
 
-	DBG(4, "<== to %s request=%p\n", ep->name, req);
+	dev_dbg(musb->controller, "<== to %s request=%p\n", ep->name, req);
 
 	/* request is mine now... */
 	request->request.actual = 0;
@@ -1253,7 +1257,7 @@
 
 	/* don't queue if the ep is down */
 	if (!musb_ep->desc) {
-		DBG(4, "req %p queued to %s while ep %s\n",
+		dev_dbg(musb->controller, "req %p queued to %s while ep %s\n",
 				req, ep->name, "disabled");
 		status = -ESHUTDOWN;
 		goto cleanup;
@@ -1290,7 +1294,7 @@
 			break;
 	}
 	if (r != req) {
-		DBG(3, "request %p not queued to %s\n", request, ep->name);
+		dev_dbg(musb->controller, "request %p not queued to %s\n", request, ep->name);
 		status = -EINVAL;
 		goto done;
 	}
@@ -1356,7 +1360,7 @@
 	request = next_request(musb_ep);
 	if (value) {
 		if (request) {
-			DBG(3, "request in progress, cannot halt %s\n",
+			dev_dbg(musb->controller, "request in progress, cannot halt %s\n",
 			    ep->name);
 			status = -EAGAIN;
 			goto done;
@@ -1365,7 +1369,7 @@
 		if (musb_ep->is_in) {
 			csr = musb_readw(epio, MUSB_TXCSR);
 			if (csr & MUSB_TXCSR_FIFONOTEMPTY) {
-				DBG(3, "FIFO busy, cannot halt %s\n", ep->name);
+				dev_dbg(musb->controller, "FIFO busy, cannot halt %s\n", ep->name);
 				status = -EAGAIN;
 				goto done;
 			}
@@ -1374,7 +1378,7 @@
 		musb_ep->wedged = 0;
 
 	/* set/clear the stall and toggle bits */
-	DBG(2, "%s: %s stall\n", ep->name, value ? "set" : "clear");
+	dev_dbg(musb->controller, "%s: %s stall\n", ep->name, value ? "set" : "clear");
 	if (musb_ep->is_in) {
 		csr = musb_readw(epio, MUSB_TXCSR);
 		csr |= MUSB_TXCSR_P_WZC_BITS
@@ -1401,7 +1405,7 @@
 
 	/* maybe start the first request in the queue */
 	if (!musb_ep->busy && !value && request) {
-		DBG(3, "restarting the request\n");
+		dev_dbg(musb->controller, "restarting the request\n");
 		musb_ep_restart(musb, request);
 	}
 
@@ -1532,7 +1536,7 @@
 	case OTG_STATE_B_IDLE:
 		/* Start SRP ... OTG not required. */
 		devctl = musb_readb(mregs, MUSB_DEVCTL);
-		DBG(2, "Sending SRP: devctl: %02x\n", devctl);
+		dev_dbg(musb->controller, "Sending SRP: devctl: %02x\n", devctl);
 		devctl |= MUSB_DEVCTL_SESSION;
 		musb_writeb(mregs, MUSB_DEVCTL, devctl);
 		devctl = musb_readb(mregs, MUSB_DEVCTL);
@@ -1556,7 +1560,7 @@
 		status = 0;
 		goto done;
 	default:
-		DBG(2, "Unhandled wake: %s\n",
+		dev_dbg(musb->controller, "Unhandled wake: %s\n",
 			otg_state_string(musb->xceiv->state));
 		goto done;
 	}
@@ -1566,7 +1570,7 @@
 	power = musb_readb(mregs, MUSB_POWER);
 	power |= MUSB_POWER_RESUME;
 	musb_writeb(mregs, MUSB_POWER, power);
-	DBG(2, "issue wakeup\n");
+	dev_dbg(musb->controller, "issue wakeup\n");
 
 	/* FIXME do this next chunk in a timer callback, no udelay */
 	mdelay(2);
@@ -1600,7 +1604,7 @@
 
 	/* FIXME if on, HdrcStart; if off, HdrcStop */
 
-	DBG(3, "gadget %s D+ pullup %s\n",
+	dev_dbg(musb->controller, "gadget %s D+ pullup %s\n",
 		musb->gadget_driver->function, is_on ? "on" : "off");
 	musb_writeb(musb->mregs, MUSB_POWER, power);
 }
@@ -1608,7 +1612,7 @@
 #if 0
 static int musb_gadget_vbus_session(struct usb_gadget *gadget, int is_active)
 {
-	DBG(2, "<= %s =>\n", __func__);
+	dev_dbg(musb->controller, "<= %s =>\n", __func__);
 
 	/*
 	 * FIXME iff driver's softconnect flag is set (as it is during probe,
@@ -1817,17 +1821,17 @@
 
 	/* driver must be initialized to support peripheral mode */
 	if (!musb) {
-		DBG(1, "no dev??\n");
+		dev_dbg(musb->controller, "no dev??\n");
 		retval = -ENODEV;
 		goto err0;
 	}
 
 	pm_runtime_get_sync(musb->controller);
 
-	DBG(3, "registering driver %s\n", driver->function);
+	dev_dbg(musb->controller, "registering driver %s\n", driver->function);
 
 	if (musb->gadget_driver) {
-		DBG(1, "%s is already bound to %s\n",
+		dev_dbg(musb->controller, "%s is already bound to %s\n",
 				musb_driver_name,
 				musb->gadget_driver->driver.name);
 		retval = -EBUSY;
@@ -1843,7 +1847,7 @@
 
 	retval = bind(&musb->g);
 	if (retval) {
-		DBG(3, "bind to driver %s failed --> %d\n",
+		dev_dbg(musb->controller, "bind to driver %s failed --> %d\n",
 				driver->driver.name, retval);
 		goto err1;
 	}
@@ -1871,7 +1875,7 @@
 	if (is_otg_enabled(musb)) {
 		struct usb_hcd	*hcd = musb_to_hcd(musb);
 
-		DBG(3, "OTG startup...\n");
+		dev_dbg(musb->controller, "OTG startup...\n");
 
 		/* REVISIT:  funcall to other code, which also
 		 * handles power budgeting ... this way also
@@ -1879,7 +1883,7 @@
 		 */
 		retval = usb_add_hcd(musb_to_hcd(musb), -1, 0);
 		if (retval < 0) {
-			DBG(1, "add_hcd failed, %d\n", retval);
+			dev_dbg(musb->controller, "add_hcd failed, %d\n", retval);
 			goto err2;
 		}
 
@@ -1986,7 +1990,7 @@
 	stop_activity(musb, driver);
 	otg_set_peripheral(musb->xceiv, NULL);
 
-	DBG(3, "unregistering driver %s\n", driver->function);
+	dev_dbg(musb->controller, "unregistering driver %s\n", driver->function);
 
 	spin_unlock_irqrestore(&musb->lock, flags);
 	driver->unbind(&musb->g);
@@ -2048,7 +2052,7 @@
 	u8	devctl;
 
 	devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
-	DBG(3, "devctl %02x\n", devctl);
+	dev_dbg(musb->controller, "devctl %02x\n", devctl);
 
 	switch (musb->xceiv->state) {
 	case OTG_STATE_B_IDLE:
@@ -2084,7 +2088,7 @@
 	void __iomem	*mregs = musb->mregs;
 	u8	devctl = musb_readb(mregs, MUSB_DEVCTL);
 
-	DBG(3, "devctl %02x\n", devctl);
+	dev_dbg(musb->controller, "devctl %02x\n", devctl);
 
 	/* clear HR */
 	musb_writeb(mregs, MUSB_DEVCTL, devctl & MUSB_DEVCTL_SESSION);
@@ -2102,7 +2106,7 @@
 	switch (musb->xceiv->state) {
 	default:
 #ifdef	CONFIG_USB_MUSB_OTG
-		DBG(2, "Unhandled disconnect %s, setting a_idle\n",
+		dev_dbg(musb->controller, "Unhandled disconnect %s, setting a_idle\n",
 			otg_state_string(musb->xceiv->state));
 		musb->xceiv->state = OTG_STATE_A_IDLE;
 		MUSB_HST_MODE(musb);
@@ -2133,7 +2137,7 @@
 	u8		devctl = musb_readb(mbase, MUSB_DEVCTL);
 	u8		power;
 
-	DBG(3, "<== %s addr=%x driver '%s'\n",
+	dev_dbg(musb->controller, "<== %s addr=%x driver '%s'\n",
 			(devctl & MUSB_DEVCTL_BDEVICE)
 				? "B-Device" : "A-Device",
 			musb_readb(mbase, MUSB_FADDR),