drm/i915: add VGA hotplug support for 945+
Add VGA port hotplug detection to the i915 driver. When KMS is enabled,
plugging in or removing a VGA cable from the VGA connector will
generate a uevent, which indicates to userspace that it should re-probe
outputs on this device (to determine modes, etc.).
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
[anholt: dropped extra PORT_HOTPLUG_STAT clear with ack from jbarnes]
Signed-off-by: Eric Anholt <eric@anholt.net>
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 87b6b60..ee7ce7b 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -48,10 +48,6 @@
/** Interrupts that we mask and unmask at runtime. */
#define I915_INTERRUPT_ENABLE_VAR (I915_USER_INTERRUPT)
-/** These are all of the interrupts used by the driver */
-#define I915_INTERRUPT_ENABLE_MASK (I915_INTERRUPT_ENABLE_FIX | \
- I915_INTERRUPT_ENABLE_VAR)
-
#define I915_PIPE_VBLANK_STATUS (PIPE_START_VBLANK_INTERRUPT_STATUS |\
PIPE_VBLANK_INTERRUPT_STATUS)
@@ -187,6 +183,19 @@
return I915_READ(reg);
}
+/*
+ * Handle hotplug events outside the interrupt handler proper.
+ */
+static void i915_hotplug_work_func(struct work_struct *work)
+{
+ drm_i915_private_t *dev_priv = container_of(work, drm_i915_private_t,
+ hotplug_work);
+ struct drm_device *dev = dev_priv->dev;
+
+ /* Just fire off a uevent and let userspace tell us what to do */
+ drm_sysfs_hotplug_event(dev);
+}
+
irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS)
{
struct drm_device *dev = (struct drm_device *) arg;
@@ -244,6 +253,20 @@
ret = IRQ_HANDLED;
+ /* Consume port. Then clear IIR or we'll miss events */
+ if ((I915_HAS_HOTPLUG(dev)) &&
+ (iir & I915_DISPLAY_PORT_INTERRUPT)) {
+ u32 hotplug_status = I915_READ(PORT_HOTPLUG_STAT);
+
+ DRM_DEBUG("hotplug event received, stat 0x%08x\n",
+ hotplug_status);
+ if (hotplug_status & dev_priv->hotplug_supported_mask)
+ schedule_work(&dev_priv->hotplug_work);
+
+ I915_WRITE(PORT_HOTPLUG_STAT, hotplug_status);
+ I915_READ(PORT_HOTPLUG_STAT);
+ }
+
I915_WRITE(IIR, iir);
new_iir = I915_READ(IIR); /* Flush posted writes */
@@ -528,17 +551,24 @@
atomic_set(&dev_priv->irq_received, 0);
+ if (I915_HAS_HOTPLUG(dev)) {
+ I915_WRITE(PORT_HOTPLUG_EN, 0);
+ I915_WRITE(PORT_HOTPLUG_STAT, I915_READ(PORT_HOTPLUG_STAT));
+ }
+
I915_WRITE(HWSTAM, 0xeffe);
I915_WRITE(PIPEASTAT, 0);
I915_WRITE(PIPEBSTAT, 0);
I915_WRITE(IMR, 0xffffffff);
I915_WRITE(IER, 0x0);
(void) I915_READ(IER);
+ INIT_WORK(&dev_priv->hotplug_work, i915_hotplug_work_func);
}
int i915_driver_irq_postinstall(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
+ u32 enable_mask = I915_INTERRUPT_ENABLE_FIX | I915_INTERRUPT_ENABLE_VAR;
dev_priv->vblank_pipe = DRM_I915_VBLANK_PIPE_A | DRM_I915_VBLANK_PIPE_B;
@@ -550,13 +580,35 @@
dev_priv->pipestat[0] = 0;
dev_priv->pipestat[1] = 0;
+ if (I915_HAS_HOTPLUG(dev)) {
+ u32 hotplug_en = I915_READ(PORT_HOTPLUG_EN);
+
+ /* Leave other bits alone */
+ hotplug_en |= HOTPLUG_EN_MASK;
+ I915_WRITE(PORT_HOTPLUG_EN, hotplug_en);
+
+ dev_priv->hotplug_supported_mask = CRT_HOTPLUG_INT_STATUS |
+ TV_HOTPLUG_INT_STATUS | SDVOC_HOTPLUG_INT_STATUS |
+ SDVOB_HOTPLUG_INT_STATUS;
+ if (IS_G4X(dev)) {
+ dev_priv->hotplug_supported_mask |=
+ HDMIB_HOTPLUG_INT_STATUS |
+ HDMIC_HOTPLUG_INT_STATUS |
+ HDMID_HOTPLUG_INT_STATUS;
+ }
+ /* Enable in IER... */
+ enable_mask |= I915_DISPLAY_PORT_INTERRUPT;
+ /* and unmask in IMR */
+ i915_enable_irq(dev_priv, I915_DISPLAY_PORT_INTERRUPT);
+ }
+
/* Disable pipe interrupt enables, clear pending pipe status */
I915_WRITE(PIPEASTAT, I915_READ(PIPEASTAT) & 0x8000ffff);
I915_WRITE(PIPEBSTAT, I915_READ(PIPEBSTAT) & 0x8000ffff);
/* Clear pending interrupt status */
I915_WRITE(IIR, I915_READ(IIR));
- I915_WRITE(IER, I915_INTERRUPT_ENABLE_MASK);
+ I915_WRITE(IER, enable_mask);
I915_WRITE(IMR, dev_priv->irq_mask_reg);
(void) I915_READ(IER);
@@ -575,6 +627,11 @@
dev_priv->vblank_pipe = 0;
+ if (I915_HAS_HOTPLUG(dev)) {
+ I915_WRITE(PORT_HOTPLUG_EN, 0);
+ I915_WRITE(PORT_HOTPLUG_STAT, I915_READ(PORT_HOTPLUG_STAT));
+ }
+
I915_WRITE(HWSTAM, 0xffffffff);
I915_WRITE(PIPEASTAT, 0);
I915_WRITE(PIPEBSTAT, 0);