Merge branch 'for-next' into omap-for-linus
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 777dc8a..4f62fcb 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -1787,6 +1787,11 @@
waiting for the ACK, so if this is set too high
interrupts *may* be lost!
+ omap_mux= [OMAP] Override bootloader pin multiplexing.
+ Format: <mux_mode0.mode_name=value>...
+ For example, to override I2C bus2:
+ omap_mux=i2c2_scl.i2c2_scl=0x100,i2c2_sda.i2c2_sda=0x100
+
opl3= [HW,OSS]
Format: <io>
diff --git a/arch/arm/configs/htcherald_defconfig b/arch/arm/configs/htcherald_defconfig
index 3382676..1b39691 100644
--- a/arch/arm/configs/htcherald_defconfig
+++ b/arch/arm/configs/htcherald_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc6
-# Sat Nov 14 10:56:01 2009
+# Linux kernel version: 2.6.32-rc8
+# Sat Dec 5 12:16:24 2009
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -198,7 +198,9 @@
# OMAP Feature Selections
#
# CONFIG_OMAP_RESET_CLOCKS is not set
-# CONFIG_OMAP_MUX is not set
+CONFIG_OMAP_MUX=y
+# CONFIG_OMAP_MUX_DEBUG is not set
+CONFIG_OMAP_MUX_WARNINGS=y
CONFIG_OMAP_MCBSP=y
# CONFIG_OMAP_MBOX_FWK is not set
CONFIG_OMAP_MPU_TIMER=y
@@ -207,6 +209,7 @@
# CONFIG_OMAP_LL_DEBUG_UART2 is not set
# CONFIG_OMAP_LL_DEBUG_UART3 is not set
# CONFIG_OMAP_LL_DEBUG_NONE is not set
+CONFIG_OMAP_SERIAL_WAKE=y
# CONFIG_OMAP_PM_NONE is not set
CONFIG_OMAP_PM_NOOP=y
diff --git a/arch/arm/configs/omap3_touchbook_defconfig b/arch/arm/configs/omap3_touchbook_defconfig
new file mode 100644
index 0000000..7c8515e
--- /dev/null
+++ b/arch/arm/configs/omap3_touchbook_defconfig
@@ -0,0 +1,2431 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.32-rc8
+# Fri Dec 4 16:02:17 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_ARCH_HAS_CPUFREQ=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_OPROFILE_ARMV7=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=15
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+# CONFIG_ELF_CORE is not set
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
+CONFIG_OPROFILE=y
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+CONFIG_SLOW_WORK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+# CONFIG_ARCH_BCMRING is not set
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+# CONFIG_ARCH_OMAP1 is not set
+# CONFIG_ARCH_OMAP2 is not set
+CONFIG_ARCH_OMAP3=y
+# CONFIG_ARCH_OMAP4 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
+# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
+CONFIG_OMAP_RESET_CLOCKS=y
+# CONFIG_OMAP_MUX is not set
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MBOX_FWK is not set
+# CONFIG_OMAP_MPU_TIMER is not set
+CONFIG_OMAP_32K_TIMER=y
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_DM_TIMER=y
+# CONFIG_OMAP_LL_DEBUG_UART1 is not set
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+CONFIG_OMAP_LL_DEBUG_UART3=y
+# CONFIG_OMAP_LL_DEBUG_NONE is not set
+# CONFIG_OMAP_PM_NONE is not set
+CONFIG_OMAP_PM_NOOP=y
+CONFIG_ARCH_OMAP34XX=y
+CONFIG_ARCH_OMAP3430=y
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP3_BEAGLE is not set
+# CONFIG_MACH_OMAP_LDP is not set
+# CONFIG_MACH_OVERO is not set
+# CONFIG_MACH_OMAP3EVM is not set
+# CONFIG_MACH_OMAP3517EVM is not set
+# CONFIG_MACH_OMAP3_PANDORA is not set
+CONFIG_MACH_OMAP3_TOUCHBOOK=y
+# CONFIG_MACH_OMAP_3430SDP is not set
+# CONFIG_MACH_NOKIA_RX51 is not set
+# CONFIG_MACH_OMAP_ZOOM2 is not set
+# CONFIG_MACH_OMAP_ZOOM3 is not set
+# CONFIG_MACH_CM_T35 is not set
+# CONFIG_MACH_IGEP0020 is not set
+# CONFIG_MACH_OMAP_3630SDP is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+CONFIG_ARM_THUMBEE=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+CONFIG_ARM_L1_CACHE_SHIFT=6
+# CONFIG_ARM_ERRATA_430973 is not set
+# CONFIG_ARM_ERRATA_458693 is not set
+# CONFIG_ARM_ERRATA_460075 is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+CONFIG_HZ=128
+# CONFIG_THUMB2_KERNEL is not set
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_LEDS=y
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=" debug "
+# CONFIG_XIP_KERNEL is not set
+CONFIG_KEXEC=y
+CONFIG_ATAGS_PROC=y
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+CONFIG_NEON=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_HAVE_AOUT=y
+CONFIG_BINFMT_AOUT=m
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+CONFIG_PM=y
+CONFIG_PM_DEBUG=y
+# CONFIG_PM_VERBOSE is not set
+CONFIG_CAN_PM_TRACE=y
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+# CONFIG_PM_TEST_SUSPEND is not set
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+# CONFIG_PM_RUNTIME is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_LRO=y
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+CONFIG_TCP_CONG_ADVANCED=y
+CONFIG_TCP_CONG_BIC=m
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_TCP_CONG_WESTWOOD=m
+CONFIG_TCP_CONG_HTCP=m
+CONFIG_TCP_CONG_HSTCP=m
+CONFIG_TCP_CONG_HYBLA=m
+CONFIG_TCP_CONG_VEGAS=m
+CONFIG_TCP_CONG_SCALABLE=m
+CONFIG_TCP_CONG_LP=m
+CONFIG_TCP_CONG_VENO=m
+CONFIG_TCP_CONG_YEAH=m
+CONFIG_TCP_CONG_ILLINOIS=m
+# CONFIG_DEFAULT_BIC is not set
+CONFIG_DEFAULT_CUBIC=y
+# CONFIG_DEFAULT_HTCP is not set
+# CONFIG_DEFAULT_VEGAS is not set
+# CONFIG_DEFAULT_WESTWOOD is not set
+# CONFIG_DEFAULT_RENO is not set
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_IPV6_TUNNEL=m
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_IPV6_SUBTREES=y
+CONFIG_IPV6_MROUTE=y
+# CONFIG_IPV6_PIMSM_V2 is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+CONFIG_BRIDGE_NETFILTER=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+CONFIG_NF_CONNTRACK_EVENTS=y
+CONFIG_NF_CT_PROTO_DCCP=m
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
+# CONFIG_NETFILTER_TPROXY is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+CONFIG_NETFILTER_XT_TARGET_HL=m
+# CONFIG_NETFILTER_XT_TARGET_LED is not set
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+# CONFIG_NETFILTER_XT_MATCH_OSF is not set
+CONFIG_IP_VS=m
+CONFIG_IP_VS_IPV6=y
+CONFIG_IP_VS_DEBUG=y
+CONFIG_IP_VS_TAB_BITS=12
+
+#
+# IPVS transport protocol load balancing support
+#
+CONFIG_IP_VS_PROTO_TCP=y
+CONFIG_IP_VS_PROTO_UDP=y
+CONFIG_IP_VS_PROTO_AH_ESP=y
+CONFIG_IP_VS_PROTO_ESP=y
+CONFIG_IP_VS_PROTO_AH=y
+
+#
+# IPVS scheduler
+#
+CONFIG_IP_VS_RR=m
+CONFIG_IP_VS_WRR=m
+CONFIG_IP_VS_LC=m
+CONFIG_IP_VS_WLC=m
+CONFIG_IP_VS_LBLC=m
+CONFIG_IP_VS_LBLCR=m
+CONFIG_IP_VS_DH=m
+CONFIG_IP_VS_SH=m
+CONFIG_IP_VS_SED=m
+CONFIG_IP_VS_NQ=m
+
+#
+# IPVS application helper
+#
+CONFIG_IP_VS_FTP=m
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV4=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_DCCP=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_RAW=m
+# CONFIG_BRIDGE_NF_EBTABLES is not set
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+
+#
+# DCCP CCIDs Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+CONFIG_IP_DCCP_CCID3=y
+# CONFIG_IP_DCCP_CCID3_DEBUG is not set
+CONFIG_IP_DCCP_CCID3_RTO=100
+CONFIG_IP_DCCP_TFRC_LIB=y
+
+#
+# DCCP Kernel Hacking
+#
+# CONFIG_IP_DCCP_DEBUG is not set
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_RDS is not set
+CONFIG_TIPC=m
+# CONFIG_TIPC_ADVANCED is not set
+# CONFIG_TIPC_DEBUG is not set
+CONFIG_ATM=m
+CONFIG_ATM_CLIP=m
+# CONFIG_ATM_CLIP_NO_ICMP is not set
+CONFIG_ATM_LANE=m
+CONFIG_ATM_MPOA=m
+CONFIG_ATM_BR2684=m
+# CONFIG_ATM_BR2684_IPFILTER is not set
+CONFIG_STP=m
+CONFIG_GARP=m
+CONFIG_BRIDGE=m
+# CONFIG_NET_DSA is not set
+CONFIG_VLAN_8021Q=m
+CONFIG_VLAN_8021Q_GVRP=y
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+CONFIG_WAN_ROUTER=m
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+CONFIG_NET_SCHED=y
+
+#
+# Queueing/Scheduling
+#
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_ATM=m
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_MULTIQ=m
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+CONFIG_NET_SCH_NETEM=m
+CONFIG_NET_SCH_DRR=m
+
+#
+# Classification
+#
+CONFIG_NET_CLS=y
+CONFIG_NET_CLS_BASIC=m
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_ROUTE=y
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+CONFIG_CLS_U32_PERF=y
+CONFIG_CLS_U32_MARK=y
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+CONFIG_NET_CLS_FLOW=m
+# CONFIG_NET_EMATCH is not set
+# CONFIG_NET_CLS_ACT is not set
+CONFIG_NET_CLS_IND=y
+CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_DROP_MONITOR is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+CONFIG_BT=y
+CONFIG_BT_L2CAP=y
+CONFIG_BT_SCO=y
+CONFIG_BT_RFCOMM=y
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=y
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=y
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIBTUSB=y
+CONFIG_BT_HCIBTSDIO=y
+CONFIG_BT_HCIUART=y
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_BT_HCIUART_LL=y
+CONFIG_BT_HCIBCM203X=y
+CONFIG_BT_HCIBPA10X=y
+CONFIG_BT_HCIBFUSB=y
+# CONFIG_BT_HCIVHCI is not set
+# CONFIG_BT_MRVL is not set
+CONFIG_AF_RXRPC=m
+# CONFIG_AF_RXRPC_DEBUG is not set
+# CONFIG_RXKAD is not set
+CONFIG_FIB_RULES=y
+CONFIG_WIRELESS=y
+CONFIG_CFG80211=m
+# CONFIG_NL80211_TESTMODE is not set
+# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
+# CONFIG_CFG80211_REG_DEBUG is not set
+CONFIG_CFG80211_DEFAULT_PS=y
+CONFIG_CFG80211_DEFAULT_PS_VALUE=1
+# CONFIG_CFG80211_DEBUGFS is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_LIB80211=y
+# CONFIG_LIB80211_DEBUG is not set
+CONFIG_MAC80211=m
+CONFIG_MAC80211_RC_PID=y
+# CONFIG_MAC80211_RC_MINSTREL is not set
+CONFIG_MAC80211_RC_DEFAULT_PID=y
+# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
+CONFIG_MAC80211_RC_DEFAULT="pid"
+# CONFIG_MAC80211_MESH is not set
+# CONFIG_MAC80211_LEDS is not set
+# CONFIG_MAC80211_DEBUGFS is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+CONFIG_WIMAX=m
+CONFIG_WIMAX_DEBUG_LEVEL=8
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_OMAP2=y
+CONFIG_MTD_NAND_OMAP_PREFETCH=y
+# CONFIG_MTD_NAND_OMAP_PREFETCH_DMA is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+CONFIG_MTD_NAND_PLATFORM=y
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+CONFIG_EEPROM_93CX6=y
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=y
+CONFIG_CHR_DEV_SCH=m
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+CONFIG_ISCSI_TCP=m
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+CONFIG_MD_RAID10=m
+CONFIG_MD_RAID456=m
+CONFIG_MD_RAID6_PQ=m
+# CONFIG_ASYNC_RAID6_TEST is not set
+CONFIG_MD_MULTIPATH=m
+CONFIG_MD_FAULTY=m
+CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+# CONFIG_DM_LOG_USERSPACE is not set
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+# CONFIG_DM_MULTIPATH_QL is not set
+# CONFIG_DM_MULTIPATH_ST is not set
+CONFIG_DM_DELAY=m
+# CONFIG_DM_UEVENT is not set
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=m
+CONFIG_BONDING=m
+CONFIG_MACVLAN=m
+CONFIG_EQUALIZER=m
+CONFIG_TUN=m
+CONFIG_VETH=m
+# CONFIG_NET_ETHERNET is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+CONFIG_WLAN=y
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN_80211=y
+# CONFIG_LIBERTAS is not set
+# CONFIG_LIBERTAS_THINFIRM is not set
+# CONFIG_AT76C50X_USB is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+# CONFIG_RTL8187 is not set
+# CONFIG_MAC80211_HWSIM is not set
+# CONFIG_P54_COMMON is not set
+# CONFIG_ATH_COMMON is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
+# CONFIG_ZD1211RW is not set
+# CONFIG_RT2X00 is not set
+# CONFIG_WL12XX is not set
+# CONFIG_IWM is not set
+
+#
+# WiMAX Wireless Broadband devices
+#
+# CONFIG_WIMAX_I2400M_USB is not set
+# CONFIG_WIMAX_I2400M_SDIO is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_ATM_DRIVERS is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
+CONFIG_PPPOE=m
+# CONFIG_PPPOATM is not set
+CONFIG_PPPOL2TP=m
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+CONFIG_NETCONSOLE=m
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_NETPOLL=y
+CONFIG_NETPOLL_TRAP=y
+CONFIG_NET_POLL_CONTROLLER=y
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=y
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_QT2160 is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_TWL4030 is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_SENTELIC is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=y
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MCS5000 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_CM109 is not set
+CONFIG_INPUT_TWL4030_PWRBUTTON=y
+CONFIG_INPUT_UINPUT=y
+# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_OMAP24XX=y
+
+#
+# SPI Protocol Masters
+#
+CONFIG_SPI_SPIDEV=y
+# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+CONFIG_GPIO_TWL4030=y
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_BATTERY_DS2760 is not set
+# CONFIG_BATTERY_DS2782 is not set
+CONFIG_BATTERY_BQ27x00=y
+# CONFIG_BATTERY_MAX17040 is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADCXX is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_MAX1111 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_SPI is not set
+CONFIG_THERMAL=y
+CONFIG_THERMAL_HWMON=y
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_OMAP_WATCHDOG=y
+# CONFIG_TWL4030_WATCHDOG is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+CONFIG_TWL4030_CORE=y
+# CONFIG_TWL4030_POWER is not set
+# CONFIG_TWL4030_CODEC is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+CONFIG_REGULATOR_TWL4030=y
+# CONFIG_REGULATOR_LP3971 is not set
+# CONFIG_REGULATOR_TPS65023 is not set
+# CONFIG_REGULATOR_TPS6507X is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_FB_OMAP is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_GENERIC=y
+
+#
+# Display device support
+#
+CONFIG_DISPLAY_SUPPORT=y
+
+#
+# Display hardware drivers
+#
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_SOUND=y
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_HWDEP=y
+CONFIG_SND_RAWMIDI=y
+CONFIG_SND_JACK=y
+CONFIG_SND_SEQUENCER=m
+# CONFIG_SND_SEQ_DUMMY is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SEQUENCER_OSS=y
+CONFIG_SND_HRTIMER=m
+CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_RAWMIDI_SEQ=m
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_VIRMIDI is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+# CONFIG_SND_ARM is not set
+CONFIG_SND_SPI=y
+CONFIG_SND_USB=y
+CONFIG_SND_USB_AUDIO=y
+CONFIG_SND_USB_CAIAQ=m
+CONFIG_SND_USB_CAIAQ_INPUT=y
+CONFIG_SND_SOC=y
+CONFIG_SND_OMAP_SOC=y
+CONFIG_SND_SOC_I2C_AND_SPI=y
+# CONFIG_SND_SOC_ALL_CODECS is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_HID_DRAGONRISE is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_TWINHAN is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_WACOM is not set
+# CONFIG_HID_ZEROPLUS is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
+CONFIG_USB_OTG=y
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_OXU210HP_HCD=y
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_SOC=y
+
+#
+# OMAP 343x high speed USB support
+#
+# CONFIG_USB_MUSB_HOST is not set
+# CONFIG_USB_MUSB_PERIPHERAL is not set
+CONFIG_USB_MUSB_OTG=y
+CONFIG_USB_GADGET_MUSB_HDRC=y
+CONFIG_USB_MUSB_HDRC_HCD=y
+# CONFIG_MUSB_PIO_ONLY is not set
+CONFIG_USB_INVENTRA_DMA=y
+# CONFIG_USB_TI_CPPI_DMA is not set
+# CONFIG_USB_MUSB_DEBUG is not set
+
+#
+# USB Device Class drivers
+#
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+CONFIG_USB_WDM=m
+CONFIG_USB_TMC=m
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+CONFIG_USB_SERIAL=m
+CONFIG_USB_EZUSB=y
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_AIRCABLE=m
+CONFIG_USB_SERIAL_ARK3116=m
+CONFIG_USB_SERIAL_BELKIN=m
+CONFIG_USB_SERIAL_CH341=m
+CONFIG_USB_SERIAL_WHITEHEAT=m
+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
+# CONFIG_USB_SERIAL_CP210X is not set
+CONFIG_USB_SERIAL_CYPRESS_M8=m
+CONFIG_USB_SERIAL_EMPEG=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_FUNSOFT=m
+CONFIG_USB_SERIAL_VISOR=m
+CONFIG_USB_SERIAL_IPAQ=m
+CONFIG_USB_SERIAL_IR=m
+CONFIG_USB_SERIAL_EDGEPORT=m
+CONFIG_USB_SERIAL_EDGEPORT_TI=m
+CONFIG_USB_SERIAL_GARMIN=m
+CONFIG_USB_SERIAL_IPW=m
+CONFIG_USB_SERIAL_IUU=m
+CONFIG_USB_SERIAL_KEYSPAN_PDA=m
+CONFIG_USB_SERIAL_KEYSPAN=m
+CONFIG_USB_SERIAL_KEYSPAN_MPR=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19=y
+CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
+CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
+CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
+CONFIG_USB_SERIAL_KLSI=m
+CONFIG_USB_SERIAL_KOBIL_SCT=m
+CONFIG_USB_SERIAL_MCT_U232=m
+CONFIG_USB_SERIAL_MOS7720=m
+CONFIG_USB_SERIAL_MOS7840=m
+CONFIG_USB_SERIAL_MOTOROLA=m
+CONFIG_USB_SERIAL_NAVMAN=m
+CONFIG_USB_SERIAL_PL2303=m
+CONFIG_USB_SERIAL_OTI6858=m
+# CONFIG_USB_SERIAL_QUALCOMM is not set
+CONFIG_USB_SERIAL_SPCP8X5=m
+CONFIG_USB_SERIAL_HP4X=m
+CONFIG_USB_SERIAL_SAFE=m
+# CONFIG_USB_SERIAL_SAFE_PADDED is not set
+CONFIG_USB_SERIAL_SIEMENS_MPI=m
+CONFIG_USB_SERIAL_SIERRAWIRELESS=m
+# CONFIG_USB_SERIAL_SYMBOL is not set
+CONFIG_USB_SERIAL_TI=m
+CONFIG_USB_SERIAL_CYBERJACK=m
+CONFIG_USB_SERIAL_XIRCOM=m
+CONFIG_USB_SERIAL_OPTION=m
+CONFIG_USB_SERIAL_OMNINET=m
+CONFIG_USB_SERIAL_OPTICON=m
+CONFIG_USB_SERIAL_DEBUG=m
+
+#
+# USB Miscellaneous drivers
+#
+CONFIG_USB_EMI62=m
+CONFIG_USB_EMI26=m
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+CONFIG_USB_SISUSBVGA=m
+CONFIG_USB_SISUSBVGA_CON=y
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+CONFIG_USB_TEST=m
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_ATM is not set
+CONFIG_USB_GADGET=m
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_DEBUG_FS=y
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+CONFIG_USB_ZERO=m
+CONFIG_USB_ZERO_HNPTEST=y
+# CONFIG_USB_AUDIO is not set
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_ETH_EEM is not set
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+CONFIG_USB_MIDI_GADGET=m
+CONFIG_USB_G_PRINTER=m
+CONFIG_USB_CDC_COMPOSITE=m
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+CONFIG_USB_GPIO_VBUS=y
+# CONFIG_ISP1301_OMAP is not set
+CONFIG_TWL4030_USB=y
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_UNSAFE_RESUME=y
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_SDIO_UART=y
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_OMAP is not set
+CONFIG_MMC_OMAP_HS=y
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
+CONFIG_MMC_SPI=m
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP3944 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_BD2802 is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=m
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_BACKLIGHT=m
+# CONFIG_LEDS_TRIGGER_GPIO is not set
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+CONFIG_RTC_DRV_TWL4030=y
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+CONFIG_UIO=m
+CONFIG_UIO_PDRV=m
+CONFIG_UIO_PDRV_GENIRQ=m
+# CONFIG_UIO_SMX is not set
+# CONFIG_UIO_SERCOS3 is not set
+
+#
+# TI VLYNQ
+#
+CONFIG_STAGING=y
+# CONFIG_STAGING_EXCLUDE_BUILD is not set
+# CONFIG_USB_IP_COMMON is not set
+# CONFIG_W35UND is not set
+# CONFIG_PRISM2_USB is not set
+# CONFIG_ECHO is not set
+# CONFIG_OTUS is not set
+# CONFIG_COMEDI is not set
+# CONFIG_ASUS_OLED is not set
+# CONFIG_INPUT_MIMIO is not set
+# CONFIG_TRANZPORT is not set
+
+#
+# Android
+#
+
+#
+# Qualcomm MSM Camera And Video
+#
+
+#
+# Camera Sensor Selection
+#
+# CONFIG_INPUT_GPIO is not set
+# CONFIG_DST is not set
+# CONFIG_POHMELFS is not set
+# CONFIG_PLAN9AUTH is not set
+# CONFIG_LINE6_USB is not set
+# CONFIG_USB_SERIAL_QUATECH2 is not set
+# CONFIG_USB_SERIAL_QUATECH_USB2 is not set
+# CONFIG_VT6656 is not set
+# CONFIG_FB_UDL is not set
+
+#
+# RAR Register Driver
+#
+# CONFIG_RAR_REGISTER is not set
+# CONFIG_IIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+CONFIG_EXT4_FS=m
+CONFIG_EXT4_FS_XATTR=y
+# CONFIG_EXT4_FS_POSIX_ACL is not set
+# CONFIG_EXT4_FS_SECURITY is not set
+# CONFIG_EXT4_DEBUG is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_JBD2=m
+# CONFIG_JBD2_DEBUG is not set
+CONFIG_FS_MBCACHE=m
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+CONFIG_REISERFS_PROC_INFO=y
+CONFIG_REISERFS_FS_XATTR=y
+# CONFIG_REISERFS_FS_POSIX_ACL is not set
+# CONFIG_REISERFS_FS_SECURITY is not set
+CONFIG_JFS_FS=m
+# CONFIG_JFS_POSIX_ACL is not set
+# CONFIG_JFS_SECURITY is not set
+# CONFIG_JFS_DEBUG is not set
+# CONFIG_JFS_STATISTICS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_XFS_FS=m
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
+CONFIG_PRINT_QUOTA_WARNING=y
+CONFIG_QUOTA_TREE=y
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=y
+# CONFIG_CUSE is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=m
+# CONFIG_NTFS_DEBUG is not set
+CONFIG_NTFS_RW=y
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=m
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_ECRYPT_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_JFFS2_FS_XATTR=y
+CONFIG_JFFS2_FS_POSIX_ACL=y
+CONFIG_JFFS2_FS_SECURITY=y
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_RTIME=y
+CONFIG_JFFS2_RUBIN=y
+# CONFIG_JFFS2_CMODE_NONE is not set
+# CONFIG_JFFS2_CMODE_PRIORITY is not set
+# CONFIG_JFFS2_CMODE_SIZE is not set
+CONFIG_JFFS2_CMODE_FAVOURLZO=y
+CONFIG_UBIFS_FS=y
+CONFIG_UBIFS_FS_XATTR=y
+CONFIG_UBIFS_FS_ADVANCED_COMPR=y
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_UBIFS_FS_DEBUG is not set
+# CONFIG_CRAMFS is not set
+CONFIG_SQUASHFS=y
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
+CONFIG_ROOT_NFS=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V2_ACL=y
+CONFIG_NFSD_V3=y
+CONFIG_NFSD_V3_ACL=y
+CONFIG_NFSD_V4=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_ACL_SUPPORT=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+CONFIG_CIFS=m
+CONFIG_CIFS_STATS=y
+CONFIG_CIFS_STATS2=y
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_UPCALL is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_DFS_UPCALL is not set
+CONFIG_CIFS_EXPERIMENTAL=y
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_UNIXWARE_DISKLABEL=y
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+CONFIG_EFI_PARTITION=y
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+CONFIG_SCHEDSTATS=y
+CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_RING_BUFFER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
+CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_RING_BUFFER_BENCHMARK is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_XOR_BLOCKS=m
+CONFIG_ASYNC_CORE=m
+CONFIG_ASYNC_MEMCPY=m
+CONFIG_ASYNC_XOR=m
+CONFIG_ASYNC_PQ=m
+CONFIG_ASYNC_RAID6_RECOV=m
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_FIPS=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_SEQIV=m
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=m
+CONFIG_CRYPTO_XCBC=m
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+CONFIG_CRYPTO_GHASH=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAMELLIA=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_ZLIB is not set
+CONFIG_CRYPTO_LZO=y
+
+#
+# Random Number Generation
+#
+CONFIG_CRYPTO_ANSI_CPRNG=m
+CONFIG_CRYPTO_HW=y
+CONFIG_BINARY_PRINTF=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=y
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC32=y
+CONFIG_CRC7=y
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/omap_4430sdp_defconfig b/arch/arm/configs/omap_4430sdp_defconfig
index a464ca3..2319113 100644
--- a/arch/arm/configs/omap_4430sdp_defconfig
+++ b/arch/arm/configs/omap_4430sdp_defconfig
@@ -1,26 +1,29 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc7
-# Tue Jun 9 12:36:23 2009
+# Linux kernel version: 2.6.32
+# Sun Dec 6 23:37:45 2009
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
+CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_LOCKBREAK=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_ARCH_HAS_CPUFREQ=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
@@ -39,11 +42,12 @@
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
@@ -52,8 +56,7 @@
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED=y is not set
-# CONFIG_SYSFS_DEPRECATED_V2=y is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
@@ -70,7 +73,6 @@
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
@@ -83,6 +85,10 @@
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
CONFIG_COMPAT_BRK=y
@@ -90,13 +96,16 @@
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
@@ -110,7 +119,7 @@
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -131,6 +140,7 @@
#
# System Type
#
+CONFIG_MMU=y
# CONFIG_ARCH_AAEC2000 is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_REALVIEW is not set
@@ -142,8 +152,10 @@
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
@@ -166,10 +178,13 @@
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
# CONFIG_ARCH_DAVINCI is not set
CONFIG_ARCH_OMAP=y
+# CONFIG_ARCH_BCMRING is not set
#
# TI OMAP Implementations
@@ -190,9 +205,12 @@
CONFIG_OMAP_32K_TIMER=y
CONFIG_OMAP_32K_TIMER_HZ=128
CONFIG_OMAP_DM_TIMER=y
-CONFIG_OMAP_LL_DEBUG_UART1=y
+# CONFIG_OMAP_LL_DEBUG_UART1 is not set
# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+CONFIG_OMAP_LL_DEBUG_UART3=y
+# CONFIG_OMAP_LL_DEBUG_NONE is not set
+# CONFIG_OMAP_PM_NONE is not set
+CONFIG_OMAP_PM_NOOP=y
#
# OMAP Board Type
@@ -207,7 +225,7 @@
CONFIG_CPU_V7=y
CONFIG_CPU_32v7=y
CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_IFAR=y
+CONFIG_CPU_PABRT_V7=y
CONFIG_CPU_CACHE_V7=y
CONFIG_CPU_CACHE_VIPT=y
CONFIG_CPU_COPY_V6=y
@@ -222,9 +240,10 @@
# CONFIG_ARM_THUMB is not set
# CONFIG_ARM_THUMBEE is not set
# CONFIG_CPU_ICACHE_DISABLE is not set
-CONFIG_CPU_DCACHE_DISABLE=y
+# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_BPREDICT_DISABLE is not set
CONFIG_HAS_TLS_REG=y
+CONFIG_ARM_L1_CACHE_SHIFT=5
# CONFIG_ARM_ERRATA_430973 is not set
# CONFIG_ARM_ERRATA_458693 is not set
# CONFIG_ARM_ERRATA_460075 is not set
@@ -245,18 +264,20 @@
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
CONFIG_HAVE_ARM_SCU=y
-CONFIG_HAVE_ARM_TWD=y
CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_NR_CPUS=2
# CONFIG_HOTPLUG_CPU is not set
-CONFIG_LOCAL_TIMERS=y
-# CONFIG_PREEMPT is not set
+# CONFIG_LOCAL_TIMERS is not set
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
CONFIG_HZ=128
+# CONFIG_THUMB2_KERNEL is not set
CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
+CONFIG_OABI_COMPAT=y
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
# CONFIG_HIGHMEM is not set
@@ -271,10 +292,13 @@
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
-# CONFIG_UNEVICTABLE_LRU is not set
CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
# CONFIG_LEDS is not set
CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
#
# Boot options
@@ -298,9 +322,11 @@
#
# At least one emulation must be selected
#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
CONFIG_VFP=y
CONFIG_VFPv3=y
-# CONFIG_NEON is not set
+CONFIG_NEON=y
#
# Userspace binary formats
@@ -325,6 +351,7 @@
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
@@ -342,6 +369,7 @@
CONFIG_BLK_DEV_RAM_SIZE=16384
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_MG_DISK is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -355,6 +383,7 @@
# CONFIG_SCSI_NETLINK is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
+# CONFIG_PHONE is not set
#
# Input device support
@@ -427,6 +456,11 @@
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
# CONFIG_DEBUG_GPIO is not set
@@ -447,11 +481,14 @@
#
# SPI GPIO expanders:
#
+
+#
+# AC97 GPIO expanders:
+#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
@@ -472,21 +509,8 @@
# CONFIG_MFD_T7L66XB is not set
# CONFIG_MFD_TC6387XB is not set
# CONFIG_MFD_TC6393XB is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
@@ -511,14 +535,17 @@
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
CONFIG_RTC_LIB=y
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
@@ -535,9 +562,12 @@
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
@@ -601,7 +631,6 @@
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
#
# Partition Types
@@ -673,23 +702,24 @@
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+# CONFIG_DETECT_SOFTLOCKUP is not set
CONFIG_DETECT_HUNG_TASK=y
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_PREEMPT is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
@@ -708,31 +738,22 @@
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_PAGE_POISONING is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
+# CONFIG_BRANCH_PROFILE_NONE is not set
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
@@ -754,7 +775,6 @@
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
@@ -796,11 +816,13 @@
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
diff --git a/arch/arm/configs/omap_zoom2_defconfig b/arch/arm/configs/omap_zoom2_defconfig
index eef9362..4b00a43 100644
--- a/arch/arm/configs/omap_zoom2_defconfig
+++ b/arch/arm/configs/omap_zoom2_defconfig
@@ -610,7 +610,8 @@
#
# Input Device Drivers
#
-# CONFIG_INPUT_KEYBOARD is not set
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_TWL4030=y
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
diff --git a/arch/arm/configs/omap_zoom3_defconfig b/arch/arm/configs/omap_zoom3_defconfig
index f0e7d0f..0d7e37a 100644
--- a/arch/arm/configs/omap_zoom3_defconfig
+++ b/arch/arm/configs/omap_zoom3_defconfig
@@ -629,7 +629,8 @@
#
# Input Device Drivers
#
-# CONFIG_INPUT_KEYBOARD is not set
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_TWL4030=y
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile
index ceced8f..9ce17f1 100644
--- a/arch/arm/mach-omap1/Makefile
+++ b/arch/arm/mach-omap1/Makefile
@@ -18,6 +18,9 @@
obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox_mach.o
mailbox_mach-objs := mailbox.o
+i2c-omap-$(CONFIG_I2C_OMAP) := i2c.o
+obj-y += $(i2c-omap-m) $(i2c-omap-y)
+
led-y := leds.o
# Specific board support
@@ -49,3 +52,7 @@
led-$(CONFIG_MACH_OMAP_PERSEUS2) += leds-h2p2-debug.o
led-$(CONFIG_MACH_OMAP_OSK) += leds-osk.o
obj-$(CONFIG_LEDS) += $(led-y)
+
+ifneq ($(CONFIG_FB_OMAP),)
+obj-y += lcd_dma.o
+endif
diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c
index f4b72c1..7e70c3c 100644
--- a/arch/arm/mach-omap1/board-fsample.c
+++ b/arch/arm/mach-omap1/board-fsample.c
@@ -19,6 +19,7 @@
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#include <linux/input.h>
+#include <linux/smc91x.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
@@ -30,7 +31,6 @@
#include <mach/gpio.h>
#include <plat/mux.h>
#include <plat/fpga.h>
-#include <plat/nand.h>
#include <plat/keypad.h>
#include <plat/common.h>
#include <plat/board.h>
@@ -100,6 +100,12 @@
0
};
+static struct smc91x_platdata smc91x_info = {
+ .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+ .leda = RPC_LED_100_10,
+ .ledb = RPC_LED_TX_RX,
+};
+
static struct resource smc91x_resources[] = {
[0] = {
.start = H2P2_DBG_FPGA_ETHR_START, /* Physical */
@@ -167,8 +173,40 @@
.resource = &nor_resource,
};
-static struct omap_nand_platform_data nand_data = {
- .options = NAND_SAMSUNG_LP_OPTIONS,
+static void nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+{
+ struct nand_chip *this = mtd->priv;
+ unsigned long mask;
+
+ if (cmd == NAND_CMD_NONE)
+ return;
+
+ mask = (ctrl & NAND_CLE) ? 0x02 : 0;
+ if (ctrl & NAND_ALE)
+ mask |= 0x04;
+ writeb(cmd, (unsigned long)this->IO_ADDR_W | mask);
+}
+
+#define FSAMPLE_NAND_RB_GPIO_PIN 62
+
+static int nand_dev_ready(struct mtd_info *mtd)
+{
+ return gpio_get_value(FSAMPLE_NAND_RB_GPIO_PIN);
+}
+
+static const char *part_probes[] = { "cmdlinepart", NULL };
+
+static struct platform_nand_data nand_data = {
+ .chip = {
+ .nr_chips = 1,
+ .chip_offset = 0,
+ .options = NAND_SAMSUNG_LP_OPTIONS,
+ .part_probe_types = part_probes,
+ },
+ .ctrl = {
+ .cmd_ctrl = nand_cmd_ctl,
+ .dev_ready = nand_dev_ready,
+ },
};
static struct resource nand_resource = {
@@ -178,7 +216,7 @@
};
static struct platform_device nand_device = {
- .name = "omapnand",
+ .name = "gen_nand",
.id = 0,
.dev = {
.platform_data = &nand_data,
@@ -190,6 +228,9 @@
static struct platform_device smc91x_device = {
.name = "smc91x",
.id = 0,
+ .dev = {
+ .platform_data = &smc91x_info,
+ },
.num_resources = ARRAY_SIZE(smc91x_resources),
.resource = smc91x_resources,
};
@@ -233,13 +274,6 @@
&lcd_device,
};
-#define P2_NAND_RB_GPIO_PIN 62
-
-static int nand_dev_ready(struct omap_nand_platform_data *data)
-{
- return gpio_get_value(P2_NAND_RB_GPIO_PIN);
-}
-
static struct omap_lcd_config fsample_lcd_config __initdata = {
.ctrl_name = "internal",
};
@@ -250,9 +284,9 @@
static void __init omap_fsample_init(void)
{
- if (gpio_request(P2_NAND_RB_GPIO_PIN, "NAND ready") < 0)
+ if (gpio_request(FSAMPLE_NAND_RB_GPIO_PIN, "NAND ready") < 0)
BUG();
- nand_data.dev_ready = nand_dev_ready;
+ gpio_direction_input(FSAMPLE_NAND_RB_GPIO_PIN);
omap_cfg_reg(L3_1610_FLASH_CS2B_OE);
omap_cfg_reg(M8_1610_FLASH_CS2B_WE);
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index 89ba8ec..fa7cece 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -28,6 +28,7 @@
#include <linux/mtd/partitions.h>
#include <linux/input.h>
#include <linux/i2c/tps65010.h>
+#include <linux/smc91x.h>
#include <mach/hardware.h>
#include <asm/gpio.h>
@@ -40,7 +41,6 @@
#include <plat/mux.h>
#include <plat/dma.h>
#include <plat/tc.h>
-#include <plat/nand.h>
#include <plat/irda.h>
#include <plat/usb.h>
#include <plat/keypad.h>
@@ -179,11 +179,43 @@
},
};
-/* dip switches control NAND chip access: 8 bit, 16 bit, or neither */
-static struct omap_nand_platform_data h2_nand_data = {
- .options = NAND_SAMSUNG_LP_OPTIONS,
- .parts = h2_nand_partitions,
- .nr_parts = ARRAY_SIZE(h2_nand_partitions),
+static void h2_nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+{
+ struct nand_chip *this = mtd->priv;
+ unsigned long mask;
+
+ if (cmd == NAND_CMD_NONE)
+ return;
+
+ mask = (ctrl & NAND_CLE) ? 0x02 : 0;
+ if (ctrl & NAND_ALE)
+ mask |= 0x04;
+ writeb(cmd, (unsigned long)this->IO_ADDR_W | mask);
+}
+
+#define H2_NAND_RB_GPIO_PIN 62
+
+static int h2_nand_dev_ready(struct mtd_info *mtd)
+{
+ return gpio_get_value(H2_NAND_RB_GPIO_PIN);
+}
+
+static const char *h2_part_probes[] = { "cmdlinepart", NULL };
+
+struct platform_nand_data h2_nand_platdata = {
+ .chip = {
+ .nr_chips = 1,
+ .chip_offset = 0,
+ .nr_partitions = ARRAY_SIZE(h2_nand_partitions),
+ .partitions = h2_nand_partitions,
+ .options = NAND_SAMSUNG_LP_OPTIONS,
+ .part_probe_types = h2_part_probes,
+ },
+ .ctrl = {
+ .cmd_ctrl = h2_nand_cmd_ctl,
+ .dev_ready = h2_nand_dev_ready,
+
+ },
};
static struct resource h2_nand_resource = {
@@ -191,15 +223,21 @@
};
static struct platform_device h2_nand_device = {
- .name = "omapnand",
+ .name = "gen_nand",
.id = 0,
.dev = {
- .platform_data = &h2_nand_data,
+ .platform_data = &h2_nand_platdata,
},
.num_resources = 1,
.resource = &h2_nand_resource,
};
+static struct smc91x_platdata h2_smc91x_info = {
+ .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+ .leda = RPC_LED_100_10,
+ .ledb = RPC_LED_TX_RX,
+};
+
static struct resource h2_smc91x_resources[] = {
[0] = {
.start = OMAP1610_ETHR_START, /* Physical */
@@ -216,6 +254,9 @@
static struct platform_device h2_smc91x_device = {
.name = "smc91x",
.id = 0,
+ .dev = {
+ .platform_data = &h2_smc91x_info,
+ },
.num_resources = ARRAY_SIZE(h2_smc91x_resources),
.resource = h2_smc91x_resources,
};
@@ -368,8 +409,6 @@
{ OMAP_TAG_LCD, &h2_lcd_config },
};
-#define H2_NAND_RB_GPIO_PIN 62
-
static void __init h2_init(void)
{
/* Here we assume the NOR boot config: NOR on CS3 (possibly swapped
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index f5cc0a7..6a7f9c3 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -28,6 +28,7 @@
#include <linux/input.h>
#include <linux/spi/spi.h>
#include <linux/i2c/tps65010.h>
+#include <linux/smc91x.h>
#include <asm/setup.h>
#include <asm/page.h>
@@ -42,7 +43,6 @@
#include <mach/irqs.h>
#include <plat/mux.h>
#include <plat/tc.h>
-#include <plat/nand.h>
#include <plat/usb.h>
#include <plat/keypad.h>
#include <plat/dma.h>
@@ -181,11 +181,43 @@
},
};
-/* dip switches control NAND chip access: 8 bit, 16 bit, or neither */
-static struct omap_nand_platform_data nand_data = {
- .options = NAND_SAMSUNG_LP_OPTIONS,
- .parts = nand_partitions,
- .nr_parts = ARRAY_SIZE(nand_partitions),
+static void nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+{
+ struct nand_chip *this = mtd->priv;
+ unsigned long mask;
+
+ if (cmd == NAND_CMD_NONE)
+ return;
+
+ mask = (ctrl & NAND_CLE) ? 0x02 : 0;
+ if (ctrl & NAND_ALE)
+ mask |= 0x04;
+ writeb(cmd, (unsigned long)this->IO_ADDR_W | mask);
+}
+
+#define H3_NAND_RB_GPIO_PIN 10
+
+static int nand_dev_ready(struct mtd_info *mtd)
+{
+ return gpio_get_value(H3_NAND_RB_GPIO_PIN);
+}
+
+static const char *part_probes[] = { "cmdlinepart", NULL };
+
+struct platform_nand_data nand_platdata = {
+ .chip = {
+ .nr_chips = 1,
+ .chip_offset = 0,
+ .nr_partitions = ARRAY_SIZE(nand_partitions),
+ .partitions = nand_partitions,
+ .options = NAND_SAMSUNG_LP_OPTIONS,
+ .part_probe_types = part_probes,
+ },
+ .ctrl = {
+ .cmd_ctrl = nand_cmd_ctl,
+ .dev_ready = nand_dev_ready,
+
+ },
};
static struct resource nand_resource = {
@@ -193,15 +225,21 @@
};
static struct platform_device nand_device = {
- .name = "omapnand",
+ .name = "gen_nand",
.id = 0,
.dev = {
- .platform_data = &nand_data,
+ .platform_data = &nand_platdata,
},
.num_resources = 1,
.resource = &nand_resource,
};
+static struct smc91x_platdata smc91x_info = {
+ .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+ .leda = RPC_LED_100_10,
+ .ledb = RPC_LED_TX_RX,
+};
+
static struct resource smc91x_resources[] = {
[0] = {
.start = OMAP1710_ETHR_START, /* Physical */
@@ -218,6 +256,9 @@
static struct platform_device smc91x_device = {
.name = "smc91x",
.id = 0,
+ .dev = {
+ .platform_data = &smc91x_info,
+ },
.num_resources = ARRAY_SIZE(smc91x_resources),
.resource = smc91x_resources,
};
@@ -332,13 +373,6 @@
},
};
-#define H3_NAND_RB_GPIO_PIN 10
-
-static int nand_dev_ready(struct omap_nand_platform_data *data)
-{
- return gpio_get_value(H3_NAND_RB_GPIO_PIN);
-}
-
static void __init h3_init(void)
{
/* Here we assume the NOR boot config: NOR on CS3 (possibly swapped
@@ -356,7 +390,7 @@
nand_resource.end += SZ_4K - 1;
if (gpio_request(H3_NAND_RB_GPIO_PIN, "NAND ready") < 0)
BUG();
- nand_data.dev_ready = nand_dev_ready;
+ gpio_direction_input(H3_NAND_RB_GPIO_PIN);
/* GPIO10 Func_MUX_CTRL reg bit 29:27, Configure V2 to mode1 as GPIO */
/* GPIO10 pullup/down register, Enable pullup on GPIO10 */
diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c
index 5f28a5c..e36639f 100644
--- a/arch/arm/mach-omap1/board-htcherald.c
+++ b/arch/arm/mach-omap1/board-htcherald.c
@@ -39,6 +39,7 @@
#include <plat/common.h>
#include <plat/board.h>
#include <plat/keypad.h>
+#include <plat/usb.h>
#include <mach/irqs.h>
@@ -140,6 +141,15 @@
.resource = kp_resources,
};
+/* USB Device */
+static struct omap_usb_config htcherald_usb_config __initdata = {
+ .otg = 0,
+ .register_host = 0,
+ .register_dev = 1,
+ .hmc_mode = 4,
+ .pins[0] = 2,
+};
+
/* LCD Device resources */
static struct platform_device lcd_device = {
.name = "lcd_htcherald",
@@ -214,6 +224,57 @@
}
}
+#define HTCHERALD_GPIO_USB_EN1 33
+#define HTCHERALD_GPIO_USB_EN2 73
+#define HTCHERALD_GPIO_USB_DM 35
+#define HTCHERALD_GPIO_USB_DP 36
+
+static void __init htcherald_usb_enable(void)
+{
+ unsigned int tries = 20;
+ unsigned int value = 0;
+
+ /* Request the GPIOs we need to control here */
+ if (gpio_request(HTCHERALD_GPIO_USB_EN1, "herald_usb") < 0)
+ goto err1;
+
+ if (gpio_request(HTCHERALD_GPIO_USB_EN2, "herald_usb") < 0)
+ goto err2;
+
+ if (gpio_request(HTCHERALD_GPIO_USB_DM, "herald_usb") < 0)
+ goto err3;
+
+ if (gpio_request(HTCHERALD_GPIO_USB_DP, "herald_usb") < 0)
+ goto err4;
+
+ /* force USB_EN GPIO to 0 */
+ do {
+ /* output low */
+ gpio_direction_output(HTCHERALD_GPIO_USB_EN1, 0);
+ } while ((value = gpio_get_value(HTCHERALD_GPIO_USB_EN1)) == 1 &&
+ --tries);
+
+ if (value == 1)
+ printk(KERN_WARNING "Unable to reset USB, trying to continue\n");
+
+ gpio_direction_output(HTCHERALD_GPIO_USB_EN2, 0); /* output low */
+ gpio_direction_input(HTCHERALD_GPIO_USB_DM); /* input */
+ gpio_direction_input(HTCHERALD_GPIO_USB_DP); /* input */
+
+ goto done;
+
+err4:
+ gpio_free(HTCHERALD_GPIO_USB_DM);
+err3:
+ gpio_free(HTCHERALD_GPIO_USB_EN2);
+err2:
+ gpio_free(HTCHERALD_GPIO_USB_EN1);
+err1:
+ printk(KERN_ERR "Unabled to request GPIO for USB\n");
+done:
+ printk(KERN_INFO "USB setup complete.\n");
+}
+
static void __init htcherald_init(void)
{
printk(KERN_INFO "HTC Herald init.\n");
@@ -225,6 +286,9 @@
platform_add_devices(devices, ARRAY_SIZE(devices));
htcherald_disable_watchdog();
+
+ htcherald_usb_enable();
+ omap_usb_init(&htcherald_usb_config);
}
static void __init htcherald_init_irq(void)
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index cf0fdb9..2133b00 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -23,6 +23,7 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/input.h>
+#include <linux/smc91x.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
@@ -142,6 +143,11 @@
.resource = innovator_kp_resources,
};
+static struct smc91x_platdata innovator_smc91x_info = {
+ .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+ .leda = RPC_LED_100_10,
+ .ledb = RPC_LED_TX_RX,
+};
#ifdef CONFIG_ARCH_OMAP15XX
@@ -175,6 +181,9 @@
static struct platform_device innovator1510_smc91x_device = {
.name = "smc91x",
.id = 0,
+ .dev = {
+ .platform_data = &innovator_smc91x_info,
+ },
.num_resources = ARRAY_SIZE(innovator1510_smc91x_resources),
.resource = innovator1510_smc91x_resources,
};
@@ -241,6 +250,9 @@
static struct platform_device innovator1610_smc91x_device = {
.name = "smc91x",
.id = 0,
+ .dev = {
+ .platform_data = &innovator_smc91x_info,
+ },
.num_resources = ARRAY_SIZE(innovator1610_smc91x_resources),
.resource = innovator1610_smc91x_resources,
};
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index 50c92c1..ccea4f4 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -33,6 +33,7 @@
#include <linux/irq.h>
#include <linux/i2c.h>
#include <linux/leds.h>
+#include <linux/smc91x.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
@@ -115,6 +116,12 @@
.resource = &osk_flash_resource,
};
+static struct smc91x_platdata osk5912_smc91x_info = {
+ .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+ .leda = RPC_LED_100_10,
+ .ledb = RPC_LED_TX_RX,
+};
+
static struct resource osk5912_smc91x_resources[] = {
[0] = {
.start = OMAP_OSK_ETHR_START, /* Physical */
@@ -131,6 +138,9 @@
static struct platform_device osk5912_smc91x_device = {
.name = "smc91x",
.id = -1,
+ .dev = {
+ .platform_data = &osk5912_smc91x_info,
+ },
.num_resources = ARRAY_SIZE(osk5912_smc91x_resources),
.resource = osk5912_smc91x_resources,
};
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
index ca7df1e..1387a4f 100644
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -19,6 +19,7 @@
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#include <linux/input.h>
+#include <linux/smc91x.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
@@ -30,7 +31,6 @@
#include <mach/gpio.h>
#include <plat/mux.h>
#include <plat/fpga.h>
-#include <plat/nand.h>
#include <plat/keypad.h>
#include <plat/common.h>
#include <plat/board.h>
@@ -67,6 +67,12 @@
0
};
+static struct smc91x_platdata smc91x_info = {
+ .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+ .leda = RPC_LED_100_10,
+ .ledb = RPC_LED_TX_RX,
+};
+
static struct resource smc91x_resources[] = {
[0] = {
.start = H2P2_DBG_FPGA_ETHR_START, /* Physical */
@@ -134,8 +140,40 @@
.resource = &nor_resource,
};
-static struct omap_nand_platform_data nand_data = {
- .options = NAND_SAMSUNG_LP_OPTIONS,
+static void nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+{
+ struct nand_chip *this = mtd->priv;
+ unsigned long mask;
+
+ if (cmd == NAND_CMD_NONE)
+ return;
+
+ mask = (ctrl & NAND_CLE) ? 0x02 : 0;
+ if (ctrl & NAND_ALE)
+ mask |= 0x04;
+ writeb(cmd, (unsigned long)this->IO_ADDR_W | mask);
+}
+
+#define P2_NAND_RB_GPIO_PIN 62
+
+static int nand_dev_ready(struct mtd_info *mtd)
+{
+ return gpio_get_value(P2_NAND_RB_GPIO_PIN);
+}
+
+static const char *part_probes[] = { "cmdlinepart", NULL };
+
+static struct platform_nand_data nand_data = {
+ .chip = {
+ .nr_chips = 1,
+ .chip_offset = 0,
+ .options = NAND_SAMSUNG_LP_OPTIONS,
+ .part_probe_types = part_probes,
+ },
+ .ctrl = {
+ .cmd_ctrl = nand_cmd_ctl,
+ .dev_ready = nand_dev_ready,
+ },
};
static struct resource nand_resource = {
@@ -145,7 +183,7 @@
};
static struct platform_device nand_device = {
- .name = "omapnand",
+ .name = "gen_nand",
.id = 0,
.dev = {
.platform_data = &nand_data,
@@ -157,6 +195,9 @@
static struct platform_device smc91x_device = {
.name = "smc91x",
.id = 0,
+ .dev = {
+ .platform_data = &smc91x_info,
+ },
.num_resources = ARRAY_SIZE(smc91x_resources),
.resource = smc91x_resources,
};
@@ -201,13 +242,6 @@
&lcd_device,
};
-#define P2_NAND_RB_GPIO_PIN 62
-
-static int nand_dev_ready(struct omap_nand_platform_data *data)
-{
- return gpio_get_value(P2_NAND_RB_GPIO_PIN);
-}
-
static struct omap_lcd_config perseus2_lcd_config __initdata = {
.ctrl_name = "internal",
};
@@ -220,7 +254,7 @@
{
if (gpio_request(P2_NAND_RB_GPIO_PIN, "NAND ready") < 0)
BUG();
- nand_data.dev_ready = nand_dev_ready;
+ gpio_direction_input(P2_NAND_RB_GPIO_PIN);
omap_cfg_reg(L3_1610_FLASH_CS2B_OE);
omap_cfg_reg(M8_1610_FLASH_CS2B_WE);
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
index 35c75c1..1691835 100644
--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -22,6 +22,7 @@
#include <linux/reboot.h>
#include <linux/serial_8250.h>
#include <linux/serial_reg.h>
+#include <linux/smc91x.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
@@ -106,6 +107,12 @@
.resource = &voiceblue_flash_resource,
};
+static struct smc91x_platdata voiceblue_smc91x_info = {
+ .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+ .leda = RPC_LED_100_10,
+ .ledb = RPC_LED_TX_RX,
+};
+
static struct resource voiceblue_smc91x_resources[] = {
[0] = {
.start = OMAP_CS2_PHYS + 0x300,
@@ -122,6 +129,9 @@
static struct platform_device voiceblue_smc91x_device = {
.name = "smc91x",
.id = 0,
+ .dev = {
+ .platform_data = &voiceblue_smc91x_info,
+ },
.num_resources = ARRAY_SIZE(voiceblue_smc91x_resources),
.resource = voiceblue_smc91x_resources,
};
diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c
index cf5f017..ab995a9 100644
--- a/arch/arm/mach-omap1/clock_data.c
+++ b/arch/arm/mach-omap1/clock_data.c
@@ -655,9 +655,9 @@
CLK("mmci-omap.1", "ick", &armper_ck.clk, CK_16XX),
/* Virtual clocks */
CLK(NULL, "mpu", &virtual_ck_mpu, CK_16XX | CK_1510 | CK_310),
- CLK("i2c_omap.1", "fck", &i2c_fck, CK_16XX | CK_1510 | CK_310),
+ CLK("i2c_omap.1", "fck", &i2c_fck, CK_16XX | CK_1510 | CK_310 | CK_7XX),
CLK("i2c_omap.1", "ick", &i2c_ick, CK_16XX),
- CLK("i2c_omap.1", "ick", &dummy_ck, CK_1510 | CK_310),
+ CLK("i2c_omap.1", "ick", &dummy_ck, CK_1510 | CK_310 | CK_7XX),
CLK("omap_uwire", "fck", &armxor_ck.clk, CK_16XX | CK_1510 | CK_310),
CLK("omap-mcbsp.1", "ick", &dspper_ck, CK_16XX),
CLK("omap-mcbsp.1", "ick", &dummy_ck, CK_1510 | CK_310),
diff --git a/arch/arm/mach-omap1/i2c.c b/arch/arm/mach-omap1/i2c.c
new file mode 100644
index 0000000..1bf4735
--- /dev/null
+++ b/arch/arm/mach-omap1/i2c.c
@@ -0,0 +1,39 @@
+/*
+ * Helper module for board specific I2C bus registration
+ *
+ * Copyright (C) 2009 Nokia Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <plat/i2c.h>
+#include <plat/mux.h>
+#include <plat/cpu.h>
+
+int __init omap_register_i2c_bus(int bus_id, u32 clkrate,
+ struct i2c_board_info const *info,
+ unsigned len)
+{
+ if (cpu_is_omap7xx()) {
+ omap_cfg_reg(I2C_7XX_SDA);
+ omap_cfg_reg(I2C_7XX_SCL);
+ } else {
+ omap_cfg_reg(I2C_SDA);
+ omap_cfg_reg(I2C_SCL);
+ }
+
+ return omap_plat_register_i2c_bus(bus_id, clkrate, info, len);
+}
diff --git a/arch/arm/mach-omap1/include/mach/lcd_dma.h b/arch/arm/mach-omap1/include/mach/lcd_dma.h
new file mode 100644
index 0000000..d7a457b
--- /dev/null
+++ b/arch/arm/mach-omap1/include/mach/lcd_dma.h
@@ -0,0 +1,78 @@
+/*
+ * arch/arm/mach-omap1/include/mach/lcd_dma.h
+ *
+ * Extracted from arch/arm/plat-omap/include/plat/dma.h
+ * Copyright (C) 2003 Nokia Corporation
+ * Author: Juha Yrjölä <juha.yrjola@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __MACH_OMAP1_LCD_DMA_H__
+#define __MACH_OMAP1_LCD_DMA_H__
+
+/* Hardware registers for LCD DMA */
+#define OMAP1510_DMA_LCD_BASE (0xfffedb00)
+#define OMAP1510_DMA_LCD_CTRL (OMAP1510_DMA_LCD_BASE + 0x00)
+#define OMAP1510_DMA_LCD_TOP_F1_L (OMAP1510_DMA_LCD_BASE + 0x02)
+#define OMAP1510_DMA_LCD_TOP_F1_U (OMAP1510_DMA_LCD_BASE + 0x04)
+#define OMAP1510_DMA_LCD_BOT_F1_L (OMAP1510_DMA_LCD_BASE + 0x06)
+#define OMAP1510_DMA_LCD_BOT_F1_U (OMAP1510_DMA_LCD_BASE + 0x08)
+
+#define OMAP1610_DMA_LCD_BASE (0xfffee300)
+#define OMAP1610_DMA_LCD_CSDP (OMAP1610_DMA_LCD_BASE + 0xc0)
+#define OMAP1610_DMA_LCD_CCR (OMAP1610_DMA_LCD_BASE + 0xc2)
+#define OMAP1610_DMA_LCD_CTRL (OMAP1610_DMA_LCD_BASE + 0xc4)
+#define OMAP1610_DMA_LCD_TOP_B1_L (OMAP1610_DMA_LCD_BASE + 0xc8)
+#define OMAP1610_DMA_LCD_TOP_B1_U (OMAP1610_DMA_LCD_BASE + 0xca)
+#define OMAP1610_DMA_LCD_BOT_B1_L (OMAP1610_DMA_LCD_BASE + 0xcc)
+#define OMAP1610_DMA_LCD_BOT_B1_U (OMAP1610_DMA_LCD_BASE + 0xce)
+#define OMAP1610_DMA_LCD_TOP_B2_L (OMAP1610_DMA_LCD_BASE + 0xd0)
+#define OMAP1610_DMA_LCD_TOP_B2_U (OMAP1610_DMA_LCD_BASE + 0xd2)
+#define OMAP1610_DMA_LCD_BOT_B2_L (OMAP1610_DMA_LCD_BASE + 0xd4)
+#define OMAP1610_DMA_LCD_BOT_B2_U (OMAP1610_DMA_LCD_BASE + 0xd6)
+#define OMAP1610_DMA_LCD_SRC_EI_B1 (OMAP1610_DMA_LCD_BASE + 0xd8)
+#define OMAP1610_DMA_LCD_SRC_FI_B1_L (OMAP1610_DMA_LCD_BASE + 0xda)
+#define OMAP1610_DMA_LCD_SRC_EN_B1 (OMAP1610_DMA_LCD_BASE + 0xe0)
+#define OMAP1610_DMA_LCD_SRC_FN_B1 (OMAP1610_DMA_LCD_BASE + 0xe4)
+#define OMAP1610_DMA_LCD_LCH_CTRL (OMAP1610_DMA_LCD_BASE + 0xea)
+#define OMAP1610_DMA_LCD_SRC_FI_B1_U (OMAP1610_DMA_LCD_BASE + 0xf4)
+
+/* LCD DMA block numbers */
+enum {
+ OMAP_LCD_DMA_B1_TOP,
+ OMAP_LCD_DMA_B1_BOTTOM,
+ OMAP_LCD_DMA_B2_TOP,
+ OMAP_LCD_DMA_B2_BOTTOM
+};
+
+/* LCD DMA functions */
+extern int omap_request_lcd_dma(void (*callback)(u16 status, void *data),
+ void *data);
+extern void omap_free_lcd_dma(void);
+extern void omap_setup_lcd_dma(void);
+extern void omap_enable_lcd_dma(void);
+extern void omap_stop_lcd_dma(void);
+extern void omap_set_lcd_dma_ext_controller(int external);
+extern void omap_set_lcd_dma_single_transfer(int single);
+extern void omap_set_lcd_dma_b1(unsigned long addr, u16 fb_xres, u16 fb_yres,
+ int data_type);
+extern void omap_set_lcd_dma_b1_rotation(int rotate);
+extern void omap_set_lcd_dma_b1_vxres(unsigned long vxres);
+extern void omap_set_lcd_dma_b1_mirror(int mirror);
+extern void omap_set_lcd_dma_b1_scale(unsigned int xscale, unsigned int yscale);
+
+extern int omap_lcd_dma_running(void);
+
+#endif /* __MACH_OMAP1_LCD_DMA_H__ */
diff --git a/arch/arm/mach-omap1/include/mach/lcdc.h b/arch/arm/mach-omap1/include/mach/lcdc.h
new file mode 100644
index 0000000..89bd703
--- /dev/null
+++ b/arch/arm/mach-omap1/include/mach/lcdc.h
@@ -0,0 +1,57 @@
+/*
+ * arch/arm/mach-omap1/include/mach/lcdc.h
+ *
+ * Extracted from drivers/video/omap/lcdc.c
+ * Copyright (C) 2004 Nokia Corporation
+ * Author: Imre Deak <imre.deak@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+#ifndef __MACH_LCDC_H__
+#define __MACH_LCDC_H__
+
+#define OMAP_LCDC_BASE 0xfffec000
+#define OMAP_LCDC_SIZE 256
+#define OMAP_LCDC_IRQ INT_LCD_CTRL
+
+#define OMAP_LCDC_CONTROL (OMAP_LCDC_BASE + 0x00)
+#define OMAP_LCDC_TIMING0 (OMAP_LCDC_BASE + 0x04)
+#define OMAP_LCDC_TIMING1 (OMAP_LCDC_BASE + 0x08)
+#define OMAP_LCDC_TIMING2 (OMAP_LCDC_BASE + 0x0c)
+#define OMAP_LCDC_STATUS (OMAP_LCDC_BASE + 0x10)
+#define OMAP_LCDC_SUBPANEL (OMAP_LCDC_BASE + 0x14)
+#define OMAP_LCDC_LINE_INT (OMAP_LCDC_BASE + 0x18)
+#define OMAP_LCDC_DISPLAY_STATUS (OMAP_LCDC_BASE + 0x1c)
+
+#define OMAP_LCDC_STAT_DONE (1 << 0)
+#define OMAP_LCDC_STAT_VSYNC (1 << 1)
+#define OMAP_LCDC_STAT_SYNC_LOST (1 << 2)
+#define OMAP_LCDC_STAT_ABC (1 << 3)
+#define OMAP_LCDC_STAT_LINE_INT (1 << 4)
+#define OMAP_LCDC_STAT_FUF (1 << 5)
+#define OMAP_LCDC_STAT_LOADED_PALETTE (1 << 6)
+
+#define OMAP_LCDC_CTRL_LCD_EN (1 << 0)
+#define OMAP_LCDC_CTRL_LCD_TFT (1 << 7)
+#define OMAP_LCDC_CTRL_LINE_IRQ_CLR_SEL (1 << 10)
+
+#define OMAP_LCDC_IRQ_VSYNC (1 << 2)
+#define OMAP_LCDC_IRQ_DONE (1 << 3)
+#define OMAP_LCDC_IRQ_LOADED_PALETTE (1 << 4)
+#define OMAP_LCDC_IRQ_LINE_NIRQ (1 << 5)
+#define OMAP_LCDC_IRQ_LINE (1 << 6)
+#define OMAP_LCDC_IRQ_MASK (((1 << 5) - 1) << 2)
+
+#endif /* __MACH_LCDC_H__ */
diff --git a/arch/arm/mach-omap1/lcd_dma.c b/arch/arm/mach-omap1/lcd_dma.c
new file mode 100644
index 0000000..3be11af
--- /dev/null
+++ b/arch/arm/mach-omap1/lcd_dma.c
@@ -0,0 +1,448 @@
+/*
+ * linux/arch/arm/mach-omap1/lcd_dma.c
+ *
+ * Extracted from arch/arm/plat-omap/dma.c
+ * Copyright (C) 2003 - 2008 Nokia Corporation
+ * Author: Juha Yrjölä <juha.yrjola@nokia.com>
+ * DMA channel linking for 1610 by Samuel Ortiz <samuel.ortiz@nokia.com>
+ * Graphics DMA and LCD DMA graphics tranformations
+ * by Imre Deak <imre.deak@nokia.com>
+ * OMAP2/3 support Copyright (C) 2004-2007 Texas Instruments, Inc.
+ * Merged to support both OMAP1 and OMAP2 by Tony Lindgren <tony@atomide.com>
+ * Some functions based on earlier dma-omap.c Copyright (C) 2001 RidgeRun, Inc.
+ *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * Support functions for the OMAP internal DMA channels.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/lcdc.h>
+#include <plat/dma.h>
+
+int omap_lcd_dma_running(void)
+{
+ /*
+ * On OMAP1510, internal LCD controller will start the transfer
+ * when it gets enabled, so assume DMA running if LCD enabled.
+ */
+ if (cpu_is_omap1510())
+ if (omap_readw(OMAP_LCDC_CONTROL) & OMAP_LCDC_CTRL_LCD_EN)
+ return 1;
+
+ /* Check if LCD DMA is running */
+ if (cpu_is_omap16xx())
+ if (omap_readw(OMAP1610_DMA_LCD_CCR) & OMAP_DMA_CCR_EN)
+ return 1;
+
+ return 0;
+}
+
+static struct lcd_dma_info {
+ spinlock_t lock;
+ int reserved;
+ void (*callback)(u16 status, void *data);
+ void *cb_data;
+
+ int active;
+ unsigned long addr, size;
+ int rotate, data_type, xres, yres;
+ int vxres;
+ int mirror;
+ int xscale, yscale;
+ int ext_ctrl;
+ int src_port;
+ int single_transfer;
+} lcd_dma;
+
+void omap_set_lcd_dma_b1(unsigned long addr, u16 fb_xres, u16 fb_yres,
+ int data_type)
+{
+ lcd_dma.addr = addr;
+ lcd_dma.data_type = data_type;
+ lcd_dma.xres = fb_xres;
+ lcd_dma.yres = fb_yres;
+}
+EXPORT_SYMBOL(omap_set_lcd_dma_b1);
+
+void omap_set_lcd_dma_src_port(int port)
+{
+ lcd_dma.src_port = port;
+}
+
+void omap_set_lcd_dma_ext_controller(int external)
+{
+ lcd_dma.ext_ctrl = external;
+}
+EXPORT_SYMBOL(omap_set_lcd_dma_ext_controller);
+
+void omap_set_lcd_dma_single_transfer(int single)
+{
+ lcd_dma.single_transfer = single;
+}
+EXPORT_SYMBOL(omap_set_lcd_dma_single_transfer);
+
+void omap_set_lcd_dma_b1_rotation(int rotate)
+{
+ if (cpu_is_omap1510()) {
+ printk(KERN_ERR "DMA rotation is not supported in 1510 mode\n");
+ BUG();
+ return;
+ }
+ lcd_dma.rotate = rotate;
+}
+EXPORT_SYMBOL(omap_set_lcd_dma_b1_rotation);
+
+void omap_set_lcd_dma_b1_mirror(int mirror)
+{
+ if (cpu_is_omap1510()) {
+ printk(KERN_ERR "DMA mirror is not supported in 1510 mode\n");
+ BUG();
+ }
+ lcd_dma.mirror = mirror;
+}
+EXPORT_SYMBOL(omap_set_lcd_dma_b1_mirror);
+
+void omap_set_lcd_dma_b1_vxres(unsigned long vxres)
+{
+ if (cpu_is_omap1510()) {
+ printk(KERN_ERR "DMA virtual resulotion is not supported "
+ "in 1510 mode\n");
+ BUG();
+ }
+ lcd_dma.vxres = vxres;
+}
+EXPORT_SYMBOL(omap_set_lcd_dma_b1_vxres);
+
+void omap_set_lcd_dma_b1_scale(unsigned int xscale, unsigned int yscale)
+{
+ if (cpu_is_omap1510()) {
+ printk(KERN_ERR "DMA scale is not supported in 1510 mode\n");
+ BUG();
+ }
+ lcd_dma.xscale = xscale;
+ lcd_dma.yscale = yscale;
+}
+EXPORT_SYMBOL(omap_set_lcd_dma_b1_scale);
+
+static void set_b1_regs(void)
+{
+ unsigned long top, bottom;
+ int es;
+ u16 w;
+ unsigned long en, fn;
+ long ei, fi;
+ unsigned long vxres;
+ unsigned int xscale, yscale;
+
+ switch (lcd_dma.data_type) {
+ case OMAP_DMA_DATA_TYPE_S8:
+ es = 1;
+ break;
+ case OMAP_DMA_DATA_TYPE_S16:
+ es = 2;
+ break;
+ case OMAP_DMA_DATA_TYPE_S32:
+ es = 4;
+ break;
+ default:
+ BUG();
+ return;
+ }
+
+ vxres = lcd_dma.vxres ? lcd_dma.vxres : lcd_dma.xres;
+ xscale = lcd_dma.xscale ? lcd_dma.xscale : 1;
+ yscale = lcd_dma.yscale ? lcd_dma.yscale : 1;
+ BUG_ON(vxres < lcd_dma.xres);
+
+#define PIXADDR(x, y) (lcd_dma.addr + \
+ ((y) * vxres * yscale + (x) * xscale) * es)
+#define PIXSTEP(sx, sy, dx, dy) (PIXADDR(dx, dy) - PIXADDR(sx, sy) - es + 1)
+
+ switch (lcd_dma.rotate) {
+ case 0:
+ if (!lcd_dma.mirror) {
+ top = PIXADDR(0, 0);
+ bottom = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1);
+ /* 1510 DMA requires the bottom address to be 2 more
+ * than the actual last memory access location. */
+ if (cpu_is_omap1510() &&
+ lcd_dma.data_type == OMAP_DMA_DATA_TYPE_S32)
+ bottom += 2;
+ ei = PIXSTEP(0, 0, 1, 0);
+ fi = PIXSTEP(lcd_dma.xres - 1, 0, 0, 1);
+ } else {
+ top = PIXADDR(lcd_dma.xres - 1, 0);
+ bottom = PIXADDR(0, lcd_dma.yres - 1);
+ ei = PIXSTEP(1, 0, 0, 0);
+ fi = PIXSTEP(0, 0, lcd_dma.xres - 1, 1);
+ }
+ en = lcd_dma.xres;
+ fn = lcd_dma.yres;
+ break;
+ case 90:
+ if (!lcd_dma.mirror) {
+ top = PIXADDR(0, lcd_dma.yres - 1);
+ bottom = PIXADDR(lcd_dma.xres - 1, 0);
+ ei = PIXSTEP(0, 1, 0, 0);
+ fi = PIXSTEP(0, 0, 1, lcd_dma.yres - 1);
+ } else {
+ top = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1);
+ bottom = PIXADDR(0, 0);
+ ei = PIXSTEP(0, 1, 0, 0);
+ fi = PIXSTEP(1, 0, 0, lcd_dma.yres - 1);
+ }
+ en = lcd_dma.yres;
+ fn = lcd_dma.xres;
+ break;
+ case 180:
+ if (!lcd_dma.mirror) {
+ top = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1);
+ bottom = PIXADDR(0, 0);
+ ei = PIXSTEP(1, 0, 0, 0);
+ fi = PIXSTEP(0, 1, lcd_dma.xres - 1, 0);
+ } else {
+ top = PIXADDR(0, lcd_dma.yres - 1);
+ bottom = PIXADDR(lcd_dma.xres - 1, 0);
+ ei = PIXSTEP(0, 0, 1, 0);
+ fi = PIXSTEP(lcd_dma.xres - 1, 1, 0, 0);
+ }
+ en = lcd_dma.xres;
+ fn = lcd_dma.yres;
+ break;
+ case 270:
+ if (!lcd_dma.mirror) {
+ top = PIXADDR(lcd_dma.xres - 1, 0);
+ bottom = PIXADDR(0, lcd_dma.yres - 1);
+ ei = PIXSTEP(0, 0, 0, 1);
+ fi = PIXSTEP(1, lcd_dma.yres - 1, 0, 0);
+ } else {
+ top = PIXADDR(0, 0);
+ bottom = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1);
+ ei = PIXSTEP(0, 0, 0, 1);
+ fi = PIXSTEP(0, lcd_dma.yres - 1, 1, 0);
+ }
+ en = lcd_dma.yres;
+ fn = lcd_dma.xres;
+ break;
+ default:
+ BUG();
+ return; /* Suppress warning about uninitialized vars */
+ }
+
+ if (cpu_is_omap1510()) {
+ omap_writew(top >> 16, OMAP1510_DMA_LCD_TOP_F1_U);
+ omap_writew(top, OMAP1510_DMA_LCD_TOP_F1_L);
+ omap_writew(bottom >> 16, OMAP1510_DMA_LCD_BOT_F1_U);
+ omap_writew(bottom, OMAP1510_DMA_LCD_BOT_F1_L);
+
+ return;
+ }
+
+ /* 1610 regs */
+ omap_writew(top >> 16, OMAP1610_DMA_LCD_TOP_B1_U);
+ omap_writew(top, OMAP1610_DMA_LCD_TOP_B1_L);
+ omap_writew(bottom >> 16, OMAP1610_DMA_LCD_BOT_B1_U);
+ omap_writew(bottom, OMAP1610_DMA_LCD_BOT_B1_L);
+
+ omap_writew(en, OMAP1610_DMA_LCD_SRC_EN_B1);
+ omap_writew(fn, OMAP1610_DMA_LCD_SRC_FN_B1);
+
+ w = omap_readw(OMAP1610_DMA_LCD_CSDP);
+ w &= ~0x03;
+ w |= lcd_dma.data_type;
+ omap_writew(w, OMAP1610_DMA_LCD_CSDP);
+
+ w = omap_readw(OMAP1610_DMA_LCD_CTRL);
+ /* Always set the source port as SDRAM for now*/
+ w &= ~(0x03 << 6);
+ if (lcd_dma.callback != NULL)
+ w |= 1 << 1; /* Block interrupt enable */
+ else
+ w &= ~(1 << 1);
+ omap_writew(w, OMAP1610_DMA_LCD_CTRL);
+
+ if (!(lcd_dma.rotate || lcd_dma.mirror ||
+ lcd_dma.vxres || lcd_dma.xscale || lcd_dma.yscale))
+ return;
+
+ w = omap_readw(OMAP1610_DMA_LCD_CCR);
+ /* Set the double-indexed addressing mode */
+ w |= (0x03 << 12);
+ omap_writew(w, OMAP1610_DMA_LCD_CCR);
+
+ omap_writew(ei, OMAP1610_DMA_LCD_SRC_EI_B1);
+ omap_writew(fi >> 16, OMAP1610_DMA_LCD_SRC_FI_B1_U);
+ omap_writew(fi, OMAP1610_DMA_LCD_SRC_FI_B1_L);
+}
+
+static irqreturn_t lcd_dma_irq_handler(int irq, void *dev_id)
+{
+ u16 w;
+
+ w = omap_readw(OMAP1610_DMA_LCD_CTRL);
+ if (unlikely(!(w & (1 << 3)))) {
+ printk(KERN_WARNING "Spurious LCD DMA IRQ\n");
+ return IRQ_NONE;
+ }
+ /* Ack the IRQ */
+ w |= (1 << 3);
+ omap_writew(w, OMAP1610_DMA_LCD_CTRL);
+ lcd_dma.active = 0;
+ if (lcd_dma.callback != NULL)
+ lcd_dma.callback(w, lcd_dma.cb_data);
+
+ return IRQ_HANDLED;
+}
+
+int omap_request_lcd_dma(void (*callback)(u16 status, void *data),
+ void *data)
+{
+ spin_lock_irq(&lcd_dma.lock);
+ if (lcd_dma.reserved) {
+ spin_unlock_irq(&lcd_dma.lock);
+ printk(KERN_ERR "LCD DMA channel already reserved\n");
+ BUG();
+ return -EBUSY;
+ }
+ lcd_dma.reserved = 1;
+ spin_unlock_irq(&lcd_dma.lock);
+ lcd_dma.callback = callback;
+ lcd_dma.cb_data = data;
+ lcd_dma.active = 0;
+ lcd_dma.single_transfer = 0;
+ lcd_dma.rotate = 0;
+ lcd_dma.vxres = 0;
+ lcd_dma.mirror = 0;
+ lcd_dma.xscale = 0;
+ lcd_dma.yscale = 0;
+ lcd_dma.ext_ctrl = 0;
+ lcd_dma.src_port = 0;
+
+ return 0;
+}
+EXPORT_SYMBOL(omap_request_lcd_dma);
+
+void omap_free_lcd_dma(void)
+{
+ spin_lock(&lcd_dma.lock);
+ if (!lcd_dma.reserved) {
+ spin_unlock(&lcd_dma.lock);
+ printk(KERN_ERR "LCD DMA is not reserved\n");
+ BUG();
+ return;
+ }
+ if (!cpu_is_omap1510())
+ omap_writew(omap_readw(OMAP1610_DMA_LCD_CCR) & ~1,
+ OMAP1610_DMA_LCD_CCR);
+ lcd_dma.reserved = 0;
+ spin_unlock(&lcd_dma.lock);
+}
+EXPORT_SYMBOL(omap_free_lcd_dma);
+
+void omap_enable_lcd_dma(void)
+{
+ u16 w;
+
+ /*
+ * Set the Enable bit only if an external controller is
+ * connected. Otherwise the OMAP internal controller will
+ * start the transfer when it gets enabled.
+ */
+ if (cpu_is_omap1510() || !lcd_dma.ext_ctrl)
+ return;
+
+ w = omap_readw(OMAP1610_DMA_LCD_CTRL);
+ w |= 1 << 8;
+ omap_writew(w, OMAP1610_DMA_LCD_CTRL);
+
+ lcd_dma.active = 1;
+
+ w = omap_readw(OMAP1610_DMA_LCD_CCR);
+ w |= 1 << 7;
+ omap_writew(w, OMAP1610_DMA_LCD_CCR);
+}
+EXPORT_SYMBOL(omap_enable_lcd_dma);
+
+void omap_setup_lcd_dma(void)
+{
+ BUG_ON(lcd_dma.active);
+ if (!cpu_is_omap1510()) {
+ /* Set some reasonable defaults */
+ omap_writew(0x5440, OMAP1610_DMA_LCD_CCR);
+ omap_writew(0x9102, OMAP1610_DMA_LCD_CSDP);
+ omap_writew(0x0004, OMAP1610_DMA_LCD_LCH_CTRL);
+ }
+ set_b1_regs();
+ if (!cpu_is_omap1510()) {
+ u16 w;
+
+ w = omap_readw(OMAP1610_DMA_LCD_CCR);
+ /*
+ * If DMA was already active set the end_prog bit to have
+ * the programmed register set loaded into the active
+ * register set.
+ */
+ w |= 1 << 11; /* End_prog */
+ if (!lcd_dma.single_transfer)
+ w |= (3 << 8); /* Auto_init, repeat */
+ omap_writew(w, OMAP1610_DMA_LCD_CCR);
+ }
+}
+EXPORT_SYMBOL(omap_setup_lcd_dma);
+
+void omap_stop_lcd_dma(void)
+{
+ u16 w;
+
+ lcd_dma.active = 0;
+ if (cpu_is_omap1510() || !lcd_dma.ext_ctrl)
+ return;
+
+ w = omap_readw(OMAP1610_DMA_LCD_CCR);
+ w &= ~(1 << 7);
+ omap_writew(w, OMAP1610_DMA_LCD_CCR);
+
+ w = omap_readw(OMAP1610_DMA_LCD_CTRL);
+ w &= ~(1 << 8);
+ omap_writew(w, OMAP1610_DMA_LCD_CTRL);
+}
+EXPORT_SYMBOL(omap_stop_lcd_dma);
+
+static int __init omap_init_lcd_dma(void)
+{
+ int r;
+
+ if (cpu_is_omap16xx()) {
+ u16 w;
+
+ /* this would prevent OMAP sleep */
+ w = omap_readw(OMAP1610_DMA_LCD_CTRL);
+ w &= ~(1 << 8);
+ omap_writew(w, OMAP1610_DMA_LCD_CTRL);
+ }
+
+ spin_lock_init(&lcd_dma.lock);
+
+ r = request_irq(INT_DMA_LCD, lcd_dma_irq_handler, 0,
+ "LCD DMA", NULL);
+ if (r != 0)
+ printk(KERN_ERR "unable to request IRQ for LCD DMA "
+ "(error %d)\n", r);
+
+ return r;
+}
+
+arch_initcall(omap_init_lcd_dma);
+
diff --git a/arch/arm/mach-omap1/mux.c b/arch/arm/mach-omap1/mux.c
index 785371e..07212cc 100644
--- a/arch/arm/mach-omap1/mux.c
+++ b/arch/arm/mach-omap1/mux.c
@@ -50,12 +50,18 @@
MUX_CFG_7XX("AA17_7XX_USB_DM", 2, 21, 0, 20, 0, 0)
MUX_CFG_7XX("W16_7XX_USB_PU_EN", 2, 25, 0, 24, 0, 0)
-MUX_CFG_7XX("W17_7XX_USB_VBUSI", 2, 29, 0, 28, 0, 0)
+MUX_CFG_7XX("W17_7XX_USB_VBUSI", 2, 29, 6, 28, 1, 0)
+MUX_CFG_7XX("W18_7XX_USB_DMCK_OUT",3, 3, 1, 2, 0, 0)
+MUX_CFG_7XX("W19_7XX_USB_DCRST", 3, 7, 1, 6, 0, 0)
/* MMC Pins */
MUX_CFG_7XX("MMC_7XX_CMD", 2, 9, 0, 8, 1, 0)
MUX_CFG_7XX("MMC_7XX_CLK", 2, 13, 0, 12, 1, 0)
MUX_CFG_7XX("MMC_7XX_DAT0", 2, 17, 0, 16, 1, 0)
+
+/* I2C interface */
+MUX_CFG_7XX("I2C_7XX_SCL", 5, 1, 0, 0, 1, 0)
+MUX_CFG_7XX("I2C_7XX_SDA", 5, 5, 0, 0, 1, 0)
};
#define OMAP7XX_PINS_SZ ARRAY_SIZE(omap7xx_pins)
#else
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 0cd25ce..76c11ee 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -24,6 +24,18 @@
depends on ARCH_OMAP3 && ARCH_OMAP34XX
select ARCH_OMAP_OTG
+config OMAP_PACKAGE_CBC
+ bool
+
+config OMAP_PACKAGE_CBB
+ bool
+
+config OMAP_PACKAGE_CUS
+ bool
+
+config OMAP_PACKAGE_CBP
+ bool
+
comment "OMAP Board Type"
depends on ARCH_OMAP2 || ARCH_OMAP3 || ARCH_OMAP4
@@ -52,14 +64,17 @@
config MACH_OMAP3_BEAGLE
bool "OMAP3 BEAGLE board"
depends on ARCH_OMAP3 && ARCH_OMAP34XX
+ select OMAP_PACKAGE_CBB
config MACH_OMAP_LDP
bool "OMAP3 LDP board"
depends on ARCH_OMAP3 && ARCH_OMAP34XX
+ select OMAP_PACKAGE_CBB
config MACH_OVERO
bool "Gumstix Overo board"
depends on ARCH_OMAP3 && ARCH_OMAP34XX
+ select OMAP_PACKAGE_CBB
config MACH_OMAP3EVM
bool "OMAP 3530 EVM board"
@@ -68,14 +83,22 @@
config MACH_OMAP3517EVM
bool "OMAP3517/ AM3517 EVM board"
depends on ARCH_OMAP3 && ARCH_OMAP34XX
+ select OMAP_PACKAGE_CBB
config MACH_OMAP3_PANDORA
bool "OMAP3 Pandora"
depends on ARCH_OMAP3 && ARCH_OMAP34XX
+ select OMAP_PACKAGE_CBB
+
+config MACH_OMAP3_TOUCHBOOK
+ bool "OMAP3 Touch Book"
+ depends on ARCH_OMAP3 && ARCH_OMAP34XX
+ select BACKLIGHT_CLASS_DEVICE
config MACH_OMAP_3430SDP
bool "OMAP 3430 SDP board"
depends on ARCH_OMAP3 && ARCH_OMAP34XX
+ select OMAP_PACKAGE_CBB
config MACH_NOKIA_N800
bool
@@ -96,26 +119,33 @@
config MACH_NOKIA_RX51
bool "Nokia RX-51 board"
depends on ARCH_OMAP3 && ARCH_OMAP34XX
+ select OMAP_PACKAGE_CBB
config MACH_OMAP_ZOOM2
bool "OMAP3 Zoom2 board"
depends on ARCH_OMAP3 && ARCH_OMAP34XX
+ select OMAP_PACKAGE_CBB
config MACH_OMAP_ZOOM3
bool "OMAP3630 Zoom3 board"
depends on ARCH_OMAP3 && ARCH_OMAP34XX
+ select OMAP_PACKAGE_CBP
config MACH_CM_T35
bool "CompuLab CM-T35 module"
depends on ARCH_OMAP3 && ARCH_OMAP34XX
+ select OMAP_PACKAGE_CUS
+ select OMAP_MUX
config MACH_IGEP0020
bool "IGEP0020"
depends on ARCH_OMAP3 && ARCH_OMAP34XX
+ select OMAP_PACKAGE_CBB
config MACH_OMAP_3630SDP
bool "OMAP3630 SDP board"
depends on ARCH_OMAP3 && ARCH_OMAP34XX
+ select OMAP_PACKAGE_CBP
config MACH_OMAP_4430SDP
bool "OMAP 4430 SDP board"
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 10c0539..b32678b 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -26,6 +26,9 @@
obj-$(CONFIG_ARCH_OMAP2430) += sram243x.o
obj-$(CONFIG_ARCH_OMAP3) += sram34xx.o
+# Pin multiplexing
+obj-$(CONFIG_ARCH_OMAP3) += mux34xx.o
+
# SMS/SDRC
obj-$(CONFIG_ARCH_OMAP2) += sdrc2xxx.o
# obj-$(CONFIG_ARCH_OMAP3) += sdrc3xxx.o
@@ -61,6 +64,9 @@
obj-$(CONFIG_OMAP_IOMMU) += $(iommu-y)
+i2c-omap-$(CONFIG_I2C_OMAP) := i2c.o
+obj-y += $(i2c-omap-m) $(i2c-omap-y)
+
# Specific board support
obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o
obj-$(CONFIG_MACH_OMAP_H4) += board-h4.o
@@ -99,7 +105,8 @@
mmc-twl4030.o
obj-$(CONFIG_MACH_IGEP0020) += board-igep0020.o \
mmc-twl4030.o
-
+obj-$(CONFIG_MACH_OMAP3_TOUCHBOOK) += board-omap3touchbook.o \
+ mmc-twl4030.o
obj-$(CONFIG_MACH_OMAP_4430SDP) += board-4430sdp.o
obj-$(CONFIG_MACH_OMAP3517EVM) += board-am3517evm.o
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index 5bda9fd..4cfb7b6 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -31,7 +31,6 @@
#include <asm/mach/map.h>
#include <plat/mcspi.h>
-#include <plat/mux.h>
#include <plat/board.h>
#include <plat/usb.h>
#include <plat/common.h>
@@ -42,6 +41,7 @@
#include <plat/control.h>
#include <plat/gpmc-smc91x.h>
+#include "mux.h"
#include "sdram-qimonda-hyb18m512160af-6.h"
#include "mmc-twl4030.h"
@@ -625,7 +625,9 @@
static void enable_board_wakeup_source(void)
{
- omap_cfg_reg(AF26_34XX_SYS_NIRQ); /* T2 interrupt line (keypad) */
+ /* T2 interrupt line (keypad) */
+ omap_mux_init_signal("sys_nirq",
+ OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP);
}
static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
@@ -640,8 +642,17 @@
.reset_gpio_port[2] = -EINVAL
};
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+ { .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define board_mux NULL
+#endif
+
static void __init omap_3430sdp_init(void)
{
+ omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
omap3430_i2c_init();
platform_add_devices(sdp3430_devices, ARRAY_SIZE(sdp3430_devices));
if (omap_rev() > OMAP3430_REV_ES1_0)
diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c
index 348b70b..7390596 100755
--- a/arch/arm/mach-omap2/board-3630sdp.c
+++ b/arch/arm/mach-omap2/board-3630sdp.c
@@ -23,6 +23,7 @@
#include <mach/board-zoom.h>
+#include "mux.h"
#include "sdram-hynix-h8mbx00u0mer-0em.h"
#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
@@ -48,7 +49,9 @@
static void enable_board_wakeup_source(void)
{
- omap_cfg_reg(AF26_34XX_SYS_NIRQ); /* T2 interrupt line (keypad) */
+ /* T2 interrupt line (keypad) */
+ omap_mux_init_signal("sys_nirq",
+ OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP);
}
static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
@@ -82,8 +85,17 @@
omap_gpio_init();
}
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+ { .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define board_mux NULL
+#endif
+
static void __init omap_sdp_init(void)
{
+ omap3_mux_init(board_mux, OMAP_PACKAGE_CBP);
zoom_peripherals_init();
board_smc91x_init();
enable_board_wakeup_source();
diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c
index 415a13d..b4e6eca 100644
--- a/arch/arm/mach-omap2/board-am3517evm.c
+++ b/arch/arm/mach-omap2/board-am3517evm.c
@@ -30,6 +30,8 @@
#include <plat/common.h>
#include <plat/usb.h>
+#include "mux.h"
+
/*
* Board initialization
*/
@@ -60,8 +62,17 @@
.reset_gpio_port[2] = -EINVAL
};
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+ { .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define board_mux NULL
+#endif
+
static void __init am3517_evm_init(void)
{
+ omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
platform_add_devices(am3517_evm_devices,
ARRAY_SIZE(am3517_evm_devices));
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index 8a2ce77..fbbd68d 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -26,6 +26,7 @@
#include <linux/leds.h>
#include <linux/err.h>
#include <linux/clk.h>
+#include <linux/smc91x.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
@@ -120,6 +121,12 @@
apollon_flash_resource[0].end = base + SZ_128K - 1;
}
+static struct smc91x_platdata appolon_smc91x_info = {
+ .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+ .leda = RPC_LED_100_10,
+ .ledb = RPC_LED_TX_RX,
+};
+
static struct resource apollon_smc91x_resources[] = {
[0] = {
.flags = IORESOURCE_MEM,
@@ -134,6 +141,9 @@
static struct platform_device apollon_smc91x_device = {
.name = "smc91x",
.id = -1,
+ .dev = {
+ .platform_data = &appolon_smc91x_info,
+ },
.num_resources = ARRAY_SIZE(apollon_smc91x_resources),
.resource = apollon_smc91x_resources,
};
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index 22c4529..1591aae 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -38,13 +38,13 @@
#include <plat/board.h>
#include <plat/common.h>
-#include <plat/mux.h>
#include <plat/nand.h>
#include <plat/gpmc.h>
#include <plat/usb.h>
#include <mach/hardware.h>
+#include "mux.h"
#include "sdram-micron-mt46h32m32lf-6.h"
#include "mmc-twl4030.h"
@@ -482,8 +482,102 @@
omap2_map_common_io();
}
+static struct omap_board_mux board_mux[] __initdata = {
+ /* nCS and IRQ for CM-T35 ethernet */
+ OMAP3_MUX(GPMC_NCS5, OMAP_MUX_MODE0),
+ OMAP3_MUX(UART3_CTS_RCTX, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP),
+
+ /* nCS and IRQ for SB-T35 ethernet */
+ OMAP3_MUX(GPMC_NCS4, OMAP_MUX_MODE0),
+ OMAP3_MUX(GPMC_WAIT3, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP),
+
+ /* PENDOWN GPIO */
+ OMAP3_MUX(GPMC_NCS6, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
+
+ /* mUSB */
+ OMAP3_MUX(HSUSB0_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(HSUSB0_STP, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+ OMAP3_MUX(HSUSB0_DIR, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(HSUSB0_NXT, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(HSUSB0_DATA0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(HSUSB0_DATA1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(HSUSB0_DATA2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(HSUSB0_DATA3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(HSUSB0_DATA4, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(HSUSB0_DATA5, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(HSUSB0_DATA6, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(HSUSB0_DATA7, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+
+ /* MMC 2 */
+ OMAP3_MUX(SDMMC2_DAT4, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT),
+ OMAP3_MUX(SDMMC2_DAT5, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT),
+ OMAP3_MUX(SDMMC2_DAT6, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT),
+ OMAP3_MUX(SDMMC2_DAT7, OMAP_MUX_MODE1 | OMAP_PIN_INPUT),
+
+ /* McSPI 1 */
+ OMAP3_MUX(MCSPI1_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(MCSPI1_SIMO, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(MCSPI1_SOMI, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(MCSPI1_CS0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
+
+ /* McSPI 4 */
+ OMAP3_MUX(MCBSP1_CLKR, OMAP_MUX_MODE1 | OMAP_PIN_INPUT),
+ OMAP3_MUX(MCBSP1_DX, OMAP_MUX_MODE1 | OMAP_PIN_INPUT),
+ OMAP3_MUX(MCBSP1_DR, OMAP_MUX_MODE1 | OMAP_PIN_INPUT),
+ OMAP3_MUX(MCBSP1_FSX, OMAP_MUX_MODE1 | OMAP_PIN_INPUT_PULLUP),
+
+ /* McBSP 2 */
+ OMAP3_MUX(MCBSP2_FSX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(MCBSP2_CLKX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(MCBSP2_DR, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(MCBSP2_DX, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+
+ /* serial ports */
+ OMAP3_MUX(MCBSP3_CLKX, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT),
+ OMAP3_MUX(MCBSP3_FSX, OMAP_MUX_MODE1 | OMAP_PIN_INPUT),
+ OMAP3_MUX(UART1_TX, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+ OMAP3_MUX(UART1_RX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+
+ /* DSS */
+ OMAP3_MUX(DSS_PCLK, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+ OMAP3_MUX(DSS_HSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+ OMAP3_MUX(DSS_VSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+ OMAP3_MUX(DSS_ACBIAS, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+ OMAP3_MUX(DSS_DATA0, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+ OMAP3_MUX(DSS_DATA1, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+ OMAP3_MUX(DSS_DATA2, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+ OMAP3_MUX(DSS_DATA3, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+ OMAP3_MUX(DSS_DATA4, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+ OMAP3_MUX(DSS_DATA5, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+ OMAP3_MUX(DSS_DATA6, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+ OMAP3_MUX(DSS_DATA7, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+ OMAP3_MUX(DSS_DATA8, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+ OMAP3_MUX(DSS_DATA9, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+ OMAP3_MUX(DSS_DATA10, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+ OMAP3_MUX(DSS_DATA11, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+ OMAP3_MUX(DSS_DATA12, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+ OMAP3_MUX(DSS_DATA13, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+ OMAP3_MUX(DSS_DATA14, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+ OMAP3_MUX(DSS_DATA15, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+ OMAP3_MUX(DSS_DATA16, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+ OMAP3_MUX(DSS_DATA17, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+ OMAP3_MUX(DSS_DATA18, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+ OMAP3_MUX(DSS_DATA19, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+ OMAP3_MUX(DSS_DATA20, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+ OMAP3_MUX(DSS_DATA21, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+ OMAP3_MUX(DSS_DATA22, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+ OMAP3_MUX(DSS_DATA23, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+
+ /* TPS IRQ */
+ OMAP3_MUX(SYS_NIRQ, OMAP_MUX_MODE0 | OMAP_WAKEUP_EN | \
+ OMAP_PIN_INPUT_PULLUP),
+
+ { .reg_offset = OMAP_MUX_TERMINATOR },
+};
+
static void __init cm_t35_init(void)
{
+ omap3_mux_init(board_mux, OMAP_PACKAGE_CUS);
omap_serial_init();
cm_t35_init_i2c();
cm_t35_init_nand();
@@ -492,8 +586,6 @@
cm_t35_init_led();
usb_musb_init();
-
- omap_cfg_reg(AF26_34XX_SYS_NIRQ);
}
MACHINE_START(CM_T35, "Compulab CM-T35")
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index fa62e80..44239e3 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -27,9 +27,9 @@
#include <plat/board.h>
#include <plat/common.h>
#include <plat/gpmc.h>
-#include <plat/mux.h>
#include <plat/usb.h>
+#include "mux.h"
#include "mmc-twl4030.h"
#define IGEP2_SMSC911X_CS 5
@@ -203,8 +203,17 @@
return 0;
}
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+ { .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define board_mux NULL
+#endif
+
static void __init igep2_init(void)
{
+ omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
igep2_i2c_init();
omap_serial_init();
usb_musb_init();
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index c062238..3743173 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -43,6 +43,7 @@
#include <plat/control.h>
#include <plat/usb.h>
+#include "mux.h"
#include "mmc-twl4030.h"
#define LDP_SMSC911X_CS 1
@@ -374,8 +375,17 @@
&ldp_gpio_keys_device,
};
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+ { .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define board_mux NULL
+#endif
+
static void __init omap_ldp_init(void)
{
+ omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
omap_i2c_init();
platform_add_devices(ldp_devices, ARRAY_SIZE(ldp_devices));
ts_gpio = 54;
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 41480bd..6ada802 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -41,10 +41,10 @@
#include <plat/common.h>
#include <plat/gpmc.h>
#include <plat/nand.h>
-#include <plat/mux.h>
#include <plat/usb.h>
#include <plat/timer-gp.h>
+#include "mux.h"
#include "mmc-twl4030.h"
#define GPMC_CS0_BASE 0x60
@@ -140,10 +140,10 @@
unsigned gpio, unsigned ngpio)
{
if (system_rev >= 0x20 && system_rev <= 0x34301000) {
- omap_cfg_reg(AG9_34XX_GPIO23);
+ omap_mux_init_gpio(23, OMAP_PIN_INPUT);
mmc[0].gpio_wp = 23;
} else {
- omap_cfg_reg(AH8_34XX_GPIO29);
+ omap_mux_init_gpio(29, OMAP_PIN_INPUT);
}
/* gpio + 0 is "mmc0_cd" (input/IRQ) */
mmc[0].gpio_cd = gpio + 0;
@@ -422,14 +422,23 @@
.reset_gpio_port[2] = -EINVAL
};
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+ { .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define board_mux NULL
+#endif
+
static void __init omap3_beagle_init(void)
{
+ omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
omap3_beagle_i2c_init();
platform_add_devices(omap3_beagle_devices,
ARRAY_SIZE(omap3_beagle_devices));
omap_serial_init();
- omap_cfg_reg(J25_34XX_GPIO170);
+ omap_mux_init_gpio(170, OMAP_PIN_INPUT);
gpio_request(170, "DVI_nPD");
/* REVISIT leave DVI powered down until it's needed ... */
gpio_direction_output(170, true);
@@ -439,8 +448,8 @@
omap3beagle_flash_init();
/* Ensure SDRC pins are mux'd for self-refresh */
- omap_cfg_reg(H16_34XX_SDRC_CKE0);
- omap_cfg_reg(H17_34XX_SDRC_CKE1);
+ omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
+ omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
}
static void __init omap3_beagle_map_io(void)
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index 5efc2e9..18913e9 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -38,11 +38,11 @@
#include <asm/mach/map.h>
#include <plat/board.h>
-#include <plat/mux.h>
#include <plat/usb.h>
#include <plat/common.h>
#include <plat/mcspi.h>
+#include "mux.h"
#include "sdram-micron-mt46h32m32lf-6.h"
#include "mmc-twl4030.h"
@@ -223,7 +223,7 @@
unsigned gpio, unsigned ngpio)
{
/* gpio + 0 is "mmc0_cd" (input/IRQ) */
- omap_cfg_reg(L8_34XX_GPIO63);
+ omap_mux_init_gpio(63, OMAP_PIN_INPUT);
mmc[0].gpio_cd = gpio + 0;
twl4030_mmc_init(mmc);
@@ -422,9 +422,18 @@
.reset_gpio_port[2] = -EINVAL
};
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+ { .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define board_mux NULL
+#endif
+
static void __init omap3_evm_init(void)
{
omap3_evm_get_revision();
+ omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
omap3_evm_i2c_init();
@@ -440,24 +449,24 @@
#endif
if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2) {
/* enable EHCI VBUS using GPIO22 */
- omap_cfg_reg(AF9_34XX_GPIO22);
+ omap_mux_init_gpio(22, OMAP_PIN_INPUT_PULLUP);
gpio_request(OMAP3_EVM_EHCI_VBUS, "enable EHCI VBUS");
gpio_direction_output(OMAP3_EVM_EHCI_VBUS, 0);
gpio_set_value(OMAP3_EVM_EHCI_VBUS, 1);
/* Select EHCI port on main board */
- omap_cfg_reg(U3_34XX_GPIO61);
+ omap_mux_init_gpio(61, OMAP_PIN_INPUT_PULLUP);
gpio_request(OMAP3_EVM_EHCI_SELECT, "select EHCI port");
gpio_direction_output(OMAP3_EVM_EHCI_SELECT, 0);
gpio_set_value(OMAP3_EVM_EHCI_SELECT, 0);
/* setup EHCI phy reset config */
- omap_cfg_reg(AH14_34XX_GPIO21);
+ omap_mux_init_gpio(21, OMAP_PIN_INPUT_PULLUP);
ehci_pdata.reset_gpio_port[1] = 21;
} else {
/* setup EHCI phy reset on MDC */
- omap_cfg_reg(AF4_34XX_GPIO135_OUT);
+ omap_mux_init_gpio(135, OMAP_PIN_OUTPUT);
ehci_pdata.reset_gpio_port[1] = 135;
}
usb_musb_init();
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 2db5ba5..6f6c601 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -40,8 +40,8 @@
#include <mach/hardware.h>
#include <plat/mcspi.h>
#include <plat/usb.h>
-#include <plat/mux.h>
+#include "mux.h"
#include "sdram-micron-mt46h32m32lf-6.h"
#include "mmc-twl4030.h"
@@ -98,10 +98,10 @@
GPIO_BUTTON_LOW(103, KEY_DOWN, "down"),
GPIO_BUTTON_LOW(96, KEY_LEFT, "left"),
GPIO_BUTTON_LOW(98, KEY_RIGHT, "right"),
- GPIO_BUTTON_LOW(111, BTN_A, "a"),
- GPIO_BUTTON_LOW(106, BTN_B, "b"),
- GPIO_BUTTON_LOW(109, BTN_X, "x"),
- GPIO_BUTTON_LOW(101, BTN_Y, "y"),
+ GPIO_BUTTON_LOW(109, KEY_KP1, "game 1"),
+ GPIO_BUTTON_LOW(111, KEY_KP2, "game 2"),
+ GPIO_BUTTON_LOW(106, KEY_KP3, "game 3"),
+ GPIO_BUTTON_LOW(101, KEY_KP4, "game 4"),
GPIO_BUTTON_LOW(102, BTN_TL, "l"),
GPIO_BUTTON_LOW(97, BTN_TL2, "l2"),
GPIO_BUTTON_LOW(105, BTN_TR, "r"),
@@ -315,7 +315,7 @@
omap_register_i2c_bus(1, 2600, omap3pandora_i2c_boardinfo,
ARRAY_SIZE(omap3pandora_i2c_boardinfo));
/* i2c2 pins are not connected */
- omap_register_i2c_bus(3, 400, NULL, 0);
+ omap_register_i2c_bus(3, 100, NULL, 0);
return 0;
}
@@ -368,23 +368,8 @@
}
};
-static struct platform_device omap3pandora_lcd_device = {
- .name = "pandora_lcd",
- .id = -1,
-};
-
-static struct omap_lcd_config omap3pandora_lcd_config __initdata = {
- .ctrl_name = "internal",
-};
-
-static struct omap_board_config_kernel omap3pandora_config[] __initdata = {
- { OMAP_TAG_LCD, &omap3pandora_lcd_config },
-};
-
static void __init omap3pandora_init_irq(void)
{
- omap_board_config = omap3pandora_config;
- omap_board_config_size = ARRAY_SIZE(omap3pandora_config);
omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
mt46h32m32lf6_sdrc_params);
omap_init_irq();
@@ -392,7 +377,6 @@
}
static struct platform_device *omap3pandora_devices[] __initdata = {
- &omap3pandora_lcd_device,
&pandora_leds_gpio,
&pandora_keys_gpio,
};
@@ -409,8 +393,17 @@
.reset_gpio_port[2] = -EINVAL
};
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+ { .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define board_mux NULL
+#endif
+
static void __init omap3pandora_init(void)
{
+ omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
omap3pandora_i2c_init();
platform_add_devices(omap3pandora_devices,
ARRAY_SIZE(omap3pandora_devices));
@@ -423,8 +416,8 @@
usb_musb_init();
/* Ensure SDRC pins are mux'd for self-refresh */
- omap_cfg_reg(H16_34XX_SDRC_CKE0);
- omap_cfg_reg(H17_34XX_SDRC_CKE1);
+ omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
+ omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
}
static void __init omap3pandora_map_io(void)
diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c
new file mode 100644
index 0000000..c9e5ebb
--- /dev/null
+++ b/arch/arm/mach-omap2/board-omap3touchbook.c
@@ -0,0 +1,572 @@
+/*
+ * linux/arch/arm/mach-omap2/board-omap3touchbook.c
+ *
+ * Copyright (C) 2009 Always Innovating
+ *
+ * Modified from mach-omap2/board-omap3beagleboard.c
+ *
+ * Initial code: Grégoire Gentil, Tim Yamin
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/leds.h>
+#include <linux/gpio.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/nand.h>
+
+#include <plat/mcspi.h>
+#include <linux/spi/spi.h>
+
+#include <linux/spi/ads7846.h>
+
+#include <linux/regulator/machine.h>
+#include <linux/i2c/twl4030.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/flash.h>
+
+#include <plat/board.h>
+#include <plat/common.h>
+#include <plat/gpmc.h>
+#include <plat/nand.h>
+#include <plat/usb.h>
+#include <plat/timer-gp.h>
+
+#include "mux.h"
+#include "mmc-twl4030.h"
+
+#include <asm/setup.h>
+
+#define GPMC_CS0_BASE 0x60
+#define GPMC_CS_SIZE 0x30
+
+#define NAND_BLOCK_SIZE SZ_128K
+
+#define OMAP3_AC_GPIO 136
+#define OMAP3_TS_GPIO 162
+#define TB_BL_PWM_TIMER 9
+#define TB_KILL_POWER_GPIO 168
+
+unsigned long touchbook_revision;
+
+static struct mtd_partition omap3touchbook_nand_partitions[] = {
+ /* All the partition sizes are listed in terms of NAND block size */
+ {
+ .name = "X-Loader",
+ .offset = 0,
+ .size = 4 * NAND_BLOCK_SIZE,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+ {
+ .name = "U-Boot",
+ .offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */
+ .size = 15 * NAND_BLOCK_SIZE,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+ {
+ .name = "U-Boot Env",
+ .offset = MTDPART_OFS_APPEND, /* Offset = 0x260000 */
+ .size = 1 * NAND_BLOCK_SIZE,
+ },
+ {
+ .name = "Kernel",
+ .offset = MTDPART_OFS_APPEND, /* Offset = 0x280000 */
+ .size = 32 * NAND_BLOCK_SIZE,
+ },
+ {
+ .name = "File System",
+ .offset = MTDPART_OFS_APPEND, /* Offset = 0x680000 */
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct omap_nand_platform_data omap3touchbook_nand_data = {
+ .options = NAND_BUSWIDTH_16,
+ .parts = omap3touchbook_nand_partitions,
+ .nr_parts = ARRAY_SIZE(omap3touchbook_nand_partitions),
+ .dma_channel = -1, /* disable DMA in OMAP NAND driver */
+ .nand_setup = NULL,
+ .dev_ready = NULL,
+};
+
+static struct resource omap3touchbook_nand_resource = {
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device omap3touchbook_nand_device = {
+ .name = "omap2-nand",
+ .id = -1,
+ .dev = {
+ .platform_data = &omap3touchbook_nand_data,
+ },
+ .num_resources = 1,
+ .resource = &omap3touchbook_nand_resource,
+};
+
+#include "sdram-micron-mt46h32m32lf-6.h"
+
+static struct twl4030_hsmmc_info mmc[] = {
+ {
+ .mmc = 1,
+ .wires = 8,
+ .gpio_wp = 29,
+ },
+ {} /* Terminator */
+};
+
+static struct platform_device omap3_touchbook_lcd_device = {
+ .name = "omap3touchbook_lcd",
+ .id = -1,
+};
+
+static struct omap_lcd_config omap3_touchbook_lcd_config __initdata = {
+ .ctrl_name = "internal",
+};
+
+static struct regulator_consumer_supply touchbook_vmmc1_supply = {
+ .supply = "vmmc",
+};
+
+static struct regulator_consumer_supply touchbook_vsim_supply = {
+ .supply = "vmmc_aux",
+};
+
+static struct gpio_led gpio_leds[];
+
+static int touchbook_twl_gpio_setup(struct device *dev,
+ unsigned gpio, unsigned ngpio)
+{
+ if (system_rev >= 0x20 && system_rev <= 0x34301000) {
+ omap_mux_init_gpio(23, OMAP_PIN_INPUT);
+ mmc[0].gpio_wp = 23;
+ } else {
+ omap_mux_init_gpio(29, OMAP_PIN_INPUT);
+ }
+ /* gpio + 0 is "mmc0_cd" (input/IRQ) */
+ mmc[0].gpio_cd = gpio + 0;
+ twl4030_mmc_init(mmc);
+
+ /* link regulators to MMC adapters */
+ touchbook_vmmc1_supply.dev = mmc[0].dev;
+ touchbook_vsim_supply.dev = mmc[0].dev;
+
+ /* REVISIT: need ehci-omap hooks for external VBUS
+ * power switch and overcurrent detect
+ */
+
+ gpio_request(gpio + 1, "EHCI_nOC");
+ gpio_direction_input(gpio + 1);
+
+ /* TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, active low) */
+ gpio_request(gpio + TWL4030_GPIO_MAX, "nEN_USB_PWR");
+ gpio_direction_output(gpio + TWL4030_GPIO_MAX, 0);
+
+ /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
+ gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
+
+ return 0;
+}
+
+static struct twl4030_gpio_platform_data touchbook_gpio_data = {
+ .gpio_base = OMAP_MAX_GPIO_LINES,
+ .irq_base = TWL4030_GPIO_IRQ_BASE,
+ .irq_end = TWL4030_GPIO_IRQ_END,
+ .use_leds = true,
+ .pullups = BIT(1),
+ .pulldowns = BIT(2) | BIT(6) | BIT(7) | BIT(8) | BIT(13)
+ | BIT(15) | BIT(16) | BIT(17),
+ .setup = touchbook_twl_gpio_setup,
+};
+
+static struct regulator_consumer_supply touchbook_vdac_supply = {
+ .supply = "vdac",
+ .dev = &omap3_touchbook_lcd_device.dev,
+};
+
+static struct regulator_consumer_supply touchbook_vdvi_supply = {
+ .supply = "vdvi",
+ .dev = &omap3_touchbook_lcd_device.dev,
+};
+
+/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
+static struct regulator_init_data touchbook_vmmc1 = {
+ .constraints = {
+ .min_uV = 1850000,
+ .max_uV = 3150000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
+ | REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &touchbook_vmmc1_supply,
+};
+
+/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
+static struct regulator_init_data touchbook_vsim = {
+ .constraints = {
+ .min_uV = 1800000,
+ .max_uV = 3000000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
+ | REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &touchbook_vsim_supply,
+};
+
+/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */
+static struct regulator_init_data touchbook_vdac = {
+ .constraints = {
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &touchbook_vdac_supply,
+};
+
+/* VPLL2 for digital video outputs */
+static struct regulator_init_data touchbook_vpll2 = {
+ .constraints = {
+ .name = "VDVI",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &touchbook_vdvi_supply,
+};
+
+static struct twl4030_usb_data touchbook_usb_data = {
+ .usb_mode = T2_USB_MODE_ULPI,
+};
+
+static struct twl4030_codec_audio_data touchbook_audio_data = {
+ .audio_mclk = 26000000,
+};
+
+static struct twl4030_codec_data touchbook_codec_data = {
+ .audio_mclk = 26000000,
+ .audio = &touchbook_audio_data,
+};
+
+static struct twl4030_platform_data touchbook_twldata = {
+ .irq_base = TWL4030_IRQ_BASE,
+ .irq_end = TWL4030_IRQ_END,
+
+ /* platform_data for children goes here */
+ .usb = &touchbook_usb_data,
+ .gpio = &touchbook_gpio_data,
+ .codec = &touchbook_codec_data,
+ .vmmc1 = &touchbook_vmmc1,
+ .vsim = &touchbook_vsim,
+ .vdac = &touchbook_vdac,
+ .vpll2 = &touchbook_vpll2,
+};
+
+static struct i2c_board_info __initdata touchbook_i2c_boardinfo[] = {
+ {
+ I2C_BOARD_INFO("twl4030", 0x48),
+ .flags = I2C_CLIENT_WAKE,
+ .irq = INT_34XX_SYS_NIRQ,
+ .platform_data = &touchbook_twldata,
+ },
+};
+
+static struct i2c_board_info __initdata touchBook_i2c_boardinfo[] = {
+ {
+ I2C_BOARD_INFO("bq27200", 0x55),
+ },
+};
+
+static int __init omap3_touchbook_i2c_init(void)
+{
+ /* Standard TouchBook bus */
+ omap_register_i2c_bus(1, 2600, touchbook_i2c_boardinfo,
+ ARRAY_SIZE(touchbook_i2c_boardinfo));
+
+ /* Additional TouchBook bus */
+ omap_register_i2c_bus(3, 100, touchBook_i2c_boardinfo,
+ ARRAY_SIZE(touchBook_i2c_boardinfo));
+
+ return 0;
+}
+
+static void __init omap3_ads7846_init(void)
+{
+ if (gpio_request(OMAP3_TS_GPIO, "ads7846_pen_down")) {
+ printk(KERN_ERR "Failed to request GPIO %d for "
+ "ads7846 pen down IRQ\n", OMAP3_TS_GPIO);
+ return;
+ }
+
+ gpio_direction_input(OMAP3_TS_GPIO);
+ omap_set_gpio_debounce(OMAP3_TS_GPIO, 1);
+ omap_set_gpio_debounce_time(OMAP3_TS_GPIO, 0xa);
+}
+
+static struct ads7846_platform_data ads7846_config = {
+ .x_min = 100,
+ .y_min = 265,
+ .x_max = 3950,
+ .y_max = 3750,
+ .x_plate_ohms = 40,
+ .pressure_max = 255,
+ .debounce_max = 10,
+ .debounce_tol = 5,
+ .debounce_rep = 1,
+ .gpio_pendown = OMAP3_TS_GPIO,
+ .keep_vref_on = 1,
+};
+
+static struct omap2_mcspi_device_config ads7846_mcspi_config = {
+ .turbo_mode = 0,
+ .single_channel = 1, /* 0: slave, 1: master */
+};
+
+static struct spi_board_info omap3_ads7846_spi_board_info[] __initdata = {
+ {
+ .modalias = "ads7846",
+ .bus_num = 4,
+ .chip_select = 0,
+ .max_speed_hz = 1500000,
+ .controller_data = &ads7846_mcspi_config,
+ .irq = OMAP_GPIO_IRQ(OMAP3_TS_GPIO),
+ .platform_data = &ads7846_config,
+ }
+};
+
+static struct gpio_led gpio_leds[] = {
+ {
+ .name = "touchbook::usr0",
+ .default_trigger = "heartbeat",
+ .gpio = 150,
+ },
+ {
+ .name = "touchbook::usr1",
+ .default_trigger = "mmc0",
+ .gpio = 149,
+ },
+ {
+ .name = "touchbook::pmu_stat",
+ .gpio = -EINVAL, /* gets replaced */
+ .active_low = true,
+ },
+};
+
+static struct gpio_led_platform_data gpio_led_info = {
+ .leds = gpio_leds,
+ .num_leds = ARRAY_SIZE(gpio_leds),
+};
+
+static struct platform_device leds_gpio = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &gpio_led_info,
+ },
+};
+
+static struct gpio_keys_button gpio_buttons[] = {
+ {
+ .code = BTN_EXTRA,
+ .gpio = 7,
+ .desc = "user",
+ .wakeup = 1,
+ },
+ {
+ .code = KEY_POWER,
+ .gpio = 183,
+ .desc = "power",
+ .wakeup = 1,
+ },
+};
+
+static struct gpio_keys_platform_data gpio_key_info = {
+ .buttons = gpio_buttons,
+ .nbuttons = ARRAY_SIZE(gpio_buttons),
+};
+
+static struct platform_device keys_gpio = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &gpio_key_info,
+ },
+};
+
+static struct omap_board_config_kernel omap3_touchbook_config[] __initdata = {
+ { OMAP_TAG_LCD, &omap3_touchbook_lcd_config },
+};
+
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+ { .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define board_mux NULL
+#endif
+
+static void __init omap3_touchbook_init_irq(void)
+{
+ omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
+ omap_board_config = omap3_touchbook_config;
+ omap_board_config_size = ARRAY_SIZE(omap3_touchbook_config);
+ omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
+ mt46h32m32lf6_sdrc_params);
+ omap_init_irq();
+#ifdef CONFIG_OMAP_32K_TIMER
+ omap2_gp_clockevent_set_gptimer(12);
+#endif
+ omap_gpio_init();
+}
+
+static struct platform_device *omap3_touchbook_devices[] __initdata = {
+ &omap3_touchbook_lcd_device,
+ &leds_gpio,
+ &keys_gpio,
+};
+
+static void __init omap3touchbook_flash_init(void)
+{
+ u8 cs = 0;
+ u8 nandcs = GPMC_CS_NUM + 1;
+
+ u32 gpmc_base_add = OMAP34XX_GPMC_VIRT;
+
+ /* find out the chip-select on which NAND exists */
+ while (cs < GPMC_CS_NUM) {
+ u32 ret = 0;
+ ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
+
+ if ((ret & 0xC00) == 0x800) {
+ printk(KERN_INFO "Found NAND on CS%d\n", cs);
+ if (nandcs > GPMC_CS_NUM)
+ nandcs = cs;
+ }
+ cs++;
+ }
+
+ if (nandcs > GPMC_CS_NUM) {
+ printk(KERN_INFO "NAND: Unable to find configuration "
+ "in GPMC\n ");
+ return;
+ }
+
+ if (nandcs < GPMC_CS_NUM) {
+ omap3touchbook_nand_data.cs = nandcs;
+ omap3touchbook_nand_data.gpmc_cs_baseaddr = (void *)
+ (gpmc_base_add + GPMC_CS0_BASE + nandcs * GPMC_CS_SIZE);
+ omap3touchbook_nand_data.gpmc_baseaddr =
+ (void *) (gpmc_base_add);
+
+ printk(KERN_INFO "Registering NAND on CS%d\n", nandcs);
+ if (platform_device_register(&omap3touchbook_nand_device) < 0)
+ printk(KERN_ERR "Unable to register NAND device\n");
+ }
+}
+
+static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+
+ .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
+ .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
+ .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+
+ .phy_reset = true,
+ .reset_gpio_port[0] = -EINVAL,
+ .reset_gpio_port[1] = 147,
+ .reset_gpio_port[2] = -EINVAL
+};
+
+static void omap3_touchbook_poweroff(void)
+{
+ int r;
+
+ r = gpio_request(TB_KILL_POWER_GPIO, "DVI reset");
+ if (r < 0) {
+ printk(KERN_ERR "Unable to get kill power GPIO\n");
+ return;
+ }
+
+ gpio_direction_output(TB_KILL_POWER_GPIO, 0);
+}
+
+static void __init early_touchbook_revision(char **p)
+{
+ if (!*p)
+ return;
+
+ strict_strtoul(*p, 10, &touchbook_revision);
+}
+__early_param("tbr=", early_touchbook_revision);
+
+static void __init omap3_touchbook_init(void)
+{
+ pm_power_off = omap3_touchbook_poweroff;
+
+ omap3_touchbook_i2c_init();
+ platform_add_devices(omap3_touchbook_devices,
+ ARRAY_SIZE(omap3_touchbook_devices));
+ omap_serial_init();
+
+ omap_mux_init_gpio(170, OMAP_PIN_INPUT);
+ gpio_request(176, "DVI_nPD");
+ /* REVISIT leave DVI powered down until it's needed ... */
+ gpio_direction_output(176, true);
+
+ /* Touchscreen and accelerometer */
+ spi_register_board_info(omap3_ads7846_spi_board_info,
+ ARRAY_SIZE(omap3_ads7846_spi_board_info));
+ omap3_ads7846_init();
+ usb_musb_init();
+ usb_ehci_init(&ehci_pdata);
+ omap3touchbook_flash_init();
+
+ /* Ensure SDRC pins are mux'd for self-refresh */
+ omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
+ omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
+}
+
+static void __init omap3_touchbook_map_io(void)
+{
+ omap2_set_globals_343x();
+ omap2_map_common_io();
+}
+
+MACHINE_START(TOUCHBOOK, "OMAP3 touchbook Board")
+ /* Maintainer: Gregoire Gentil - http://www.alwaysinnovating.com */
+ .phys_io = 0x48000000,
+ .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
+ .boot_params = 0x80000100,
+ .map_io = omap3_touchbook_map_io,
+ .init_irq = omap3_touchbook_init_irq,
+ .init_machine = omap3_touchbook_init,
+ .timer = &omap_timer,
+MACHINE_END
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index 52dfd51..5b78a87 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -44,9 +44,9 @@
#include <plat/gpmc.h>
#include <mach/hardware.h>
#include <plat/nand.h>
-#include <plat/mux.h>
#include <plat/usb.h>
+#include "mux.h"
#include "sdram-micron-mt46h32m32lf-6.h"
#include "mmc-twl4030.h"
@@ -405,9 +405,17 @@
.reset_gpio_port[2] = -EINVAL
};
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+ { .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define board_mux NULL
+#endif
static void __init overo_init(void)
{
+ omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
overo_i2c_init();
platform_add_devices(overo_devices, ARRAY_SIZE(overo_devices));
omap_serial_init();
@@ -418,8 +426,8 @@
overo_init_smsc911x();
/* Ensure SDRC pins are mux'd for self-refresh */
- omap_cfg_reg(H16_34XX_SDRC_CKE0);
- omap_cfg_reg(H17_34XX_SDRC_CKE1);
+ omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
+ omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
if ((gpio_request(OVERO_GPIO_W2W_NRESET,
"OVERO_GPIO_W2W_NRESET") == 0) &&
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index 15ce651..bf26ad3 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -33,6 +33,7 @@
#include <plat/onenand.h>
#include <plat/gpmc-smc91x.h>
+#include "mux.h"
#include "mmc-twl4030.h"
#define SYSTEM_REV_B_USES_VAUX3 0x1699
@@ -59,7 +60,7 @@
.bus_num = 4,
.chip_select = 0,
.max_speed_hz = 48000000,
- .mode = SPI_MODE_2,
+ .mode = SPI_MODE_3,
.controller_data = &wl1251_mcspi_config,
.platform_data = &wl1251_pdata,
},
@@ -630,9 +631,9 @@
static void __init board_smc91x_init(void)
{
- omap_cfg_reg(U8_34XX_GPIO54_DOWN);
- omap_cfg_reg(G25_34XX_GPIO86_OUT);
- omap_cfg_reg(H19_34XX_GPIO164_OUT);
+ omap_mux_init_gpio(54, OMAP_PIN_INPUT_PULLDOWN);
+ omap_mux_init_gpio(86, OMAP_PIN_OUTPUT);
+ omap_mux_init_gpio(164, OMAP_PIN_OUTPUT);
gpmc_smc91x_init(&board_smc91x_data);
}
diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c
index 1bb1de2..67bb347 100644
--- a/arch/arm/mach-omap2/board-rx51.c
+++ b/arch/arm/mach-omap2/board-rx51.c
@@ -23,13 +23,14 @@
#include <asm/mach/map.h>
#include <plat/mcspi.h>
-#include <plat/mux.h>
#include <plat/board.h>
#include <plat/common.h>
#include <plat/dma.h>
#include <plat/gpmc.h>
#include <plat/usb.h>
+#include "mux.h"
+
struct omap_sdrc_params *rx51_get_sdram_timings(void);
static struct omap_lcd_config rx51_lcd_config = {
@@ -69,15 +70,24 @@
extern void __init rx51_peripherals_init(void);
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+ { .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define board_mux NULL
+#endif
+
static void __init rx51_init(void)
{
+ omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
omap_serial_init();
usb_musb_init();
rx51_peripherals_init();
/* Ensure SDRC pins are mux'd for self-refresh */
- omap_cfg_reg(H16_34XX_SDRC_CKE0);
- omap_cfg_reg(H17_34XX_SDRC_CKE1);
+ omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
+ omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
}
static void __init rx51_map_io(void)
diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c
index f14baa3..258794d 100755
--- a/arch/arm/mach-omap2/board-zoom-peripherals.c
+++ b/arch/arm/mach-omap2/board-zoom-peripherals.c
@@ -152,14 +152,20 @@
static struct twl4030_hsmmc_info mmc[] __initdata = {
{
+ .name = "external",
.mmc = 1,
.wires = 4,
.gpio_wp = -EINVAL,
+ .power_saving = true,
},
{
+ .name = "internal",
.mmc = 2,
- .wires = 4,
+ .wires = 8,
+ .gpio_cd = -EINVAL,
.gpio_wp = -EINVAL,
+ .nonremovable = true,
+ .power_saving = true,
},
{} /* Terminator */
};
@@ -167,11 +173,8 @@
static int zoom_twl_gpio_setup(struct device *dev,
unsigned gpio, unsigned ngpio)
{
- /* gpio + 0 is "mmc0_cd" (input/IRQ),
- * gpio + 1 is "mmc1_cd" (input/IRQ)
- */
+ /* gpio + 0 is "mmc0_cd" (input/IRQ) */
mmc[0].gpio_cd = gpio + 0;
- mmc[1].gpio_cd = gpio + 1;
twl4030_mmc_init(mmc);
/* link regulators to MMC adapters ... we "know" the
@@ -236,6 +239,7 @@
.gpio = &zoom_gpio_data,
.keypad = &zoom_kp_twl4030_data,
.codec = &zoom_codec_data,
+ .vmmc1 = &zoom_vmmc1,
.vmmc2 = &zoom_vmmc2,
.vsim = &zoom_vsim,
diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c
index d94d047..bb87cf7 100644
--- a/arch/arm/mach-omap2/board-zoom2.c
+++ b/arch/arm/mach-omap2/board-zoom2.c
@@ -23,6 +23,7 @@
#include <mach/board-zoom.h>
+#include "mux.h"
#include "sdram-micron-mt46h32m32lf-6.h"
static void __init omap_zoom2_init_irq(void)
@@ -68,8 +69,17 @@
#endif
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+ { .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define board_mux NULL
+#endif
+
static void __init omap_zoom2_init(void)
{
+ omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
zoom_peripherals_init();
zoom_debugboard_init();
}
diff --git a/arch/arm/mach-omap2/board-zoom3.c b/arch/arm/mach-omap2/board-zoom3.c
index 8d965a6..a9fe918 100644
--- a/arch/arm/mach-omap2/board-zoom3.c
+++ b/arch/arm/mach-omap2/board-zoom3.c
@@ -21,6 +21,7 @@
#include <plat/common.h>
#include <plat/board.h>
+#include "mux.h"
#include "sdram-hynix-h8mbx00u0mer-0em.h"
static void __init omap_zoom_map_io(void)
@@ -42,8 +43,17 @@
omap_gpio_init();
}
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+ { .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define board_mux NULL
+#endif
+
static void __init omap_zoom_init(void)
{
+ omap3_mux_init(board_mux, OMAP_PACKAGE_CBP);
zoom_peripherals_init();
zoom_debugboard_init();
}
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 733d3dc..18ad9316 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -27,6 +27,8 @@
#include <mach/gpio.h>
#include <plat/mmc.h>
+#include "mux.h"
+
#if defined(CONFIG_VIDEO_OMAP2) || defined(CONFIG_VIDEO_OMAP2_MODULE)
static struct resource cam_resources[] = {
@@ -595,27 +597,40 @@
if (cpu_is_omap34xx()) {
if (controller_nr == 0) {
- omap_cfg_reg(N28_3430_MMC1_CLK);
- omap_cfg_reg(M27_3430_MMC1_CMD);
- omap_cfg_reg(N27_3430_MMC1_DAT0);
+ omap_mux_init_signal("sdmmc1_clk",
+ OMAP_PIN_INPUT_PULLUP);
+ omap_mux_init_signal("sdmmc1_cmd",
+ OMAP_PIN_INPUT_PULLUP);
+ omap_mux_init_signal("sdmmc1_dat0",
+ OMAP_PIN_INPUT_PULLUP);
if (mmc_controller->slots[0].wires == 4 ||
mmc_controller->slots[0].wires == 8) {
- omap_cfg_reg(N26_3430_MMC1_DAT1);
- omap_cfg_reg(N25_3430_MMC1_DAT2);
- omap_cfg_reg(P28_3430_MMC1_DAT3);
+ omap_mux_init_signal("sdmmc1_dat1",
+ OMAP_PIN_INPUT_PULLUP);
+ omap_mux_init_signal("sdmmc1_dat2",
+ OMAP_PIN_INPUT_PULLUP);
+ omap_mux_init_signal("sdmmc1_dat3",
+ OMAP_PIN_INPUT_PULLUP);
}
if (mmc_controller->slots[0].wires == 8) {
- omap_cfg_reg(P27_3430_MMC1_DAT4);
- omap_cfg_reg(P26_3430_MMC1_DAT5);
- omap_cfg_reg(R27_3430_MMC1_DAT6);
- omap_cfg_reg(R25_3430_MMC1_DAT7);
+ omap_mux_init_signal("sdmmc1_dat4",
+ OMAP_PIN_INPUT_PULLUP);
+ omap_mux_init_signal("sdmmc1_dat5",
+ OMAP_PIN_INPUT_PULLUP);
+ omap_mux_init_signal("sdmmc1_dat6",
+ OMAP_PIN_INPUT_PULLUP);
+ omap_mux_init_signal("sdmmc1_dat7",
+ OMAP_PIN_INPUT_PULLUP);
}
}
if (controller_nr == 1) {
/* MMC2 */
- omap_cfg_reg(AE2_3430_MMC2_CLK);
- omap_cfg_reg(AG5_3430_MMC2_CMD);
- omap_cfg_reg(AH5_3430_MMC2_DAT0);
+ omap_mux_init_signal("sdmmc2_clk",
+ OMAP_PIN_INPUT_PULLUP);
+ omap_mux_init_signal("sdmmc2_cmd",
+ OMAP_PIN_INPUT_PULLUP);
+ omap_mux_init_signal("sdmmc2_dat0",
+ OMAP_PIN_INPUT_PULLUP);
/*
* For 8 wire configurations, Lines DAT4, 5, 6 and 7 need to be muxed
@@ -623,15 +638,22 @@
*/
if (mmc_controller->slots[0].wires == 4 ||
mmc_controller->slots[0].wires == 8) {
- omap_cfg_reg(AH4_3430_MMC2_DAT1);
- omap_cfg_reg(AG4_3430_MMC2_DAT2);
- omap_cfg_reg(AF4_3430_MMC2_DAT3);
+ omap_mux_init_signal("sdmmc2_dat1",
+ OMAP_PIN_INPUT_PULLUP);
+ omap_mux_init_signal("sdmmc2_dat2",
+ OMAP_PIN_INPUT_PULLUP);
+ omap_mux_init_signal("sdmmc2_dat3",
+ OMAP_PIN_INPUT_PULLUP);
}
if (mmc_controller->slots[0].wires == 8) {
- omap_cfg_reg(AE4_3430_MMC2_DAT4);
- omap_cfg_reg(AH3_3430_MMC2_DAT5);
- omap_cfg_reg(AF3_3430_MMC2_DAT6);
- omap_cfg_reg(AE3_3430_MMC2_DAT7);
+ omap_mux_init_signal("sdmmc2_dat4.sdmmc2_dat4",
+ OMAP_PIN_INPUT_PULLUP);
+ omap_mux_init_signal("sdmmc2_dat5.sdmmc2_dat5",
+ OMAP_PIN_INPUT_PULLUP);
+ omap_mux_init_signal("sdmmc2_dat6.sdmmc2_dat6",
+ OMAP_PIN_INPUT_PULLUP);
+ omap_mux_init_signal("sdmmc2_dat7.sdmmc2_dat7",
+ OMAP_PIN_INPUT_PULLUP);
}
}
diff --git a/arch/arm/mach-omap2/gpmc-smc91x.c b/arch/arm/mach-omap2/gpmc-smc91x.c
index 6083e21..877c6f5 100644
--- a/arch/arm/mach-omap2/gpmc-smc91x.c
+++ b/arch/arm/mach-omap2/gpmc-smc91x.c
@@ -33,17 +33,19 @@
};
static struct smc91x_platdata gpmc_smc91x_info = {
- .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT | SMC91X_IO_SHIFT_0,
+ .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT | SMC91X_IO_SHIFT_0,
+ .leda = RPC_LED_100_10,
+ .ledb = RPC_LED_TX_RX,
};
static struct platform_device gpmc_smc91x_device = {
.name = "smc91x",
.id = -1,
- .num_resources = ARRAY_SIZE(gpmc_smc91x_resources),
- .resource = gpmc_smc91x_resources,
.dev = {
.platform_data = &gpmc_smc91x_info,
},
+ .num_resources = ARRAY_SIZE(gpmc_smc91x_resources),
+ .resource = gpmc_smc91x_resources,
};
/*
diff --git a/arch/arm/mach-omap2/i2c.c b/arch/arm/mach-omap2/i2c.c
new file mode 100644
index 0000000..789ca8c
--- /dev/null
+++ b/arch/arm/mach-omap2/i2c.c
@@ -0,0 +1,56 @@
+/*
+ * Helper module for board specific I2C bus registration
+ *
+ * Copyright (C) 2009 Nokia Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <plat/cpu.h>
+#include <plat/i2c.h>
+#include <plat/mux.h>
+
+#include "mux.h"
+
+int __init omap_register_i2c_bus(int bus_id, u32 clkrate,
+ struct i2c_board_info const *info,
+ unsigned len)
+{
+ if (cpu_is_omap24xx()) {
+ const int omap24xx_pins[][2] = {
+ { M19_24XX_I2C1_SCL, L15_24XX_I2C1_SDA },
+ { J15_24XX_I2C2_SCL, H19_24XX_I2C2_SDA },
+ };
+ int scl, sda;
+
+ scl = omap24xx_pins[bus_id - 1][0];
+ sda = omap24xx_pins[bus_id - 1][1];
+ omap_cfg_reg(sda);
+ omap_cfg_reg(scl);
+ }
+
+ /* First I2C bus is not muxable */
+ if (cpu_is_omap34xx() && bus_id > 1) {
+ char mux_name[sizeof("i2c2_scl.i2c2_scl")];
+
+ sprintf(mux_name, "i2c%i_scl.i2c%i_scl", bus_id, bus_id);
+ omap_mux_init_signal(mux_name, OMAP_PIN_INPUT);
+ sprintf(mux_name, "i2c%i_sda.i2c%i_sda", bus_id, bus_id);
+ omap_mux_init_signal(mux_name, OMAP_PIN_INPUT);
+ }
+
+ return omap_plat_register_i2c_bus(bus_id, clkrate, info, len);
+}
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index f48a4b2..a091b53 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -246,6 +246,31 @@
}
}
+void __init omap4_check_revision(void)
+{
+ u32 idcode;
+ u16 hawkeye;
+ u8 rev;
+ char *rev_name = "ES1.0";
+
+ /*
+ * The IC rev detection is done with hawkeye and rev.
+ * Note that rev does not map directly to defined processor
+ * revision numbers as ES1.0 uses value 0.
+ */
+ idcode = read_tap_reg(OMAP_TAP_IDCODE);
+ hawkeye = (idcode >> 12) & 0xffff;
+ rev = (idcode >> 28) & 0xff;
+
+ if ((hawkeye == 0xb852) && (rev == 0x0)) {
+ omap_revision = OMAP4430_REV_ES1_0;
+ pr_info("OMAP%04x %s\n", omap_rev() >> 16, rev_name);
+ return;
+ }
+
+ pr_err("Unknown OMAP4 CPU id\n");
+}
+
#define OMAP3_SHOW_FEATURE(feat) \
if (omap3_has_ ##feat()) \
printk(#feat" ");
@@ -277,10 +302,10 @@
} else if (omap3_has_iva() && omap3_has_sgx()) {
/* OMAP3430, OMAP3525, OMAP3515, OMAP3503 devices */
strcpy(cpu_name, "OMAP3430/3530");
- } else if (omap3_has_sgx()) {
+ } else if (omap3_has_iva()) {
omap_revision = OMAP3525_REV(rev);
strcpy(cpu_name, "OMAP3525");
- } else if (omap3_has_iva()) {
+ } else if (omap3_has_sgx()) {
omap_revision = OMAP3515_REV(rev);
strcpy(cpu_name, "OMAP3515");
} else {
@@ -336,7 +361,7 @@
omap3_check_features();
omap3_cpuinfo();
} else if (cpu_is_omap44xx()) {
- printk(KERN_INFO "FIXME: CPU revision = OMAP4430\n");
+ omap4_check_revision();
return;
} else {
pr_err("OMAP revision unknown, please fix!\n");
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index ac9ea60..a8749e8 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -33,6 +33,7 @@
#include <plat/sdrc.h>
#include <plat/gpmc.h>
#include <plat/serial.h>
+#include <plat/mux.h>
#include <plat/vram.h>
#include "clock.h"
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index c18a94e..e071b3f 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -27,19 +27,52 @@
#include <linux/init.h>
#include <linux/io.h>
#include <linux/spinlock.h>
+#include <linux/list.h>
+#include <linux/ctype.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/uaccess.h>
#include <asm/system.h>
#include <plat/control.h>
#include <plat/mux.h>
-#ifdef CONFIG_OMAP_MUX
+#include "mux.h"
+
+#define OMAP_MUX_BASE_OFFSET 0x30 /* Offset from CTRL_BASE */
+#define OMAP_MUX_BASE_SZ 0x5ca
+
+struct omap_mux_entry {
+ struct omap_mux mux;
+ struct list_head node;
+};
+
+static unsigned long mux_phys;
+static void __iomem *mux_base;
+
+static inline u16 omap_mux_read(u16 reg)
+{
+ if (cpu_is_omap24xx())
+ return __raw_readb(mux_base + reg);
+ else
+ return __raw_readw(mux_base + reg);
+}
+
+static inline void omap_mux_write(u16 val, u16 reg)
+{
+ if (cpu_is_omap24xx())
+ __raw_writeb(val, mux_base + reg);
+ else
+ __raw_writew(val, mux_base + reg);
+}
+
+#if defined(CONFIG_ARCH_OMAP24XX) && defined(CONFIG_OMAP_MUX)
static struct omap_mux_cfg arch_mux_cfg;
/* NOTE: See mux.h for the enumeration */
-#ifdef CONFIG_ARCH_OMAP24XX
static struct pin_config __initdata_or_module omap24xx_pins[] = {
/*
* description mux mux pull pull debug
@@ -249,342 +282,14 @@
#define OMAP24XX_PINS_SZ ARRAY_SIZE(omap24xx_pins)
-#else
-#define omap24xx_pins NULL
-#define OMAP24XX_PINS_SZ 0
-#endif /* CONFIG_ARCH_OMAP24XX */
-
-#ifdef CONFIG_ARCH_OMAP34XX
-static struct pin_config __initdata_or_module omap34xx_pins[] = {
-/*
- * Name, reg-offset,
- * mux-mode | [active-mode | off-mode]
- */
-
-/* 34xx I2C */
-MUX_CFG_34XX("K21_34XX_I2C1_SCL", 0x1ba,
- OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("J21_34XX_I2C1_SDA", 0x1bc,
- OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("AF15_34XX_I2C2_SCL", 0x1be,
- OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("AE15_34XX_I2C2_SDA", 0x1c0,
- OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("AF14_34XX_I2C3_SCL", 0x1c2,
- OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("AG14_34XX_I2C3_SDA", 0x1c4,
- OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("AD26_34XX_I2C4_SCL", 0xa00,
- OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("AE26_34XX_I2C4_SDA", 0xa02,
- OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
-
-/* PHY - HSUSB: 12-pin ULPI PHY: Port 1*/
-MUX_CFG_34XX("Y8_3430_USB1HS_PHY_CLK", 0x5da,
- OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_OUTPUT)
-MUX_CFG_34XX("Y9_3430_USB1HS_PHY_STP", 0x5d8,
- OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_OUTPUT)
-MUX_CFG_34XX("AA14_3430_USB1HS_PHY_DIR", 0x5ec,
- OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("AA11_3430_USB1HS_PHY_NXT", 0x5ee,
- OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("W13_3430_USB1HS_PHY_D0", 0x5dc,
- OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("W12_3430_USB1HS_PHY_D1", 0x5de,
- OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("W11_3430_USB1HS_PHY_D2", 0x5e0,
- OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("Y11_3430_USB1HS_PHY_D3", 0x5ea,
- OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("W9_3430_USB1HS_PHY_D4", 0x5e4,
- OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("Y12_3430_USB1HS_PHY_D5", 0x5e6,
- OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("W8_3430_USB1HS_PHY_D6", 0x5e8,
- OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("Y13_3430_USB1HS_PHY_D7", 0x5e2,
- OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
-
-/* PHY - HSUSB: 12-pin ULPI PHY: Port 2*/
-MUX_CFG_34XX("AA8_3430_USB2HS_PHY_CLK", 0x5f0,
- OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_OUTPUT)
-MUX_CFG_34XX("AA10_3430_USB2HS_PHY_STP", 0x5f2,
- OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_OUTPUT)
-MUX_CFG_34XX("AA9_3430_USB2HS_PHY_DIR", 0x5f4,
- OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("AB11_3430_USB2HS_PHY_NXT", 0x5f6,
- OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("AB10_3430_USB2HS_PHY_D0", 0x5f8,
- OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("AB9_3430_USB2HS_PHY_D1", 0x5fa,
- OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("W3_3430_USB2HS_PHY_D2", 0x1d4,
- OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("T4_3430_USB2HS_PHY_D3", 0x1de,
- OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("T3_3430_USB2HS_PHY_D4", 0x1d8,
- OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("R3_3430_USB2HS_PHY_D5", 0x1da,
- OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("R4_3430_USB2HS_PHY_D6", 0x1dc,
- OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("T2_3430_USB2HS_PHY_D7", 0x1d6,
- OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
-
-/* TLL - HSUSB: 12-pin TLL Port 1*/
-MUX_CFG_34XX("Y8_3430_USB1HS_TLL_CLK", 0x5da,
- OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("Y9_3430_USB1HS_TLL_STP", 0x5d8,
- OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("AA14_3430_USB1HS_TLL_DIR", 0x5ec,
- OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("AA11_3430_USB1HS_TLL_NXT", 0x5ee,
- OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("W13_3430_USB1HS_TLL_D0", 0x5dc,
- OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("W12_3430_USB1HS_TLL_D1", 0x5de,
- OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("W11_3430_USB1HS_TLL_D2", 0x5e0,
- OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("Y11_3430_USB1HS_TLL_D3", 0x5ea,
- OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("W9_3430_USB1HS_TLL_D4", 0x5e4,
- OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("Y12_3430_USB1HS_TLL_D5", 0x5e6,
- OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("W8_3430_USB1HS_TLL_D6", 0x5e8,
- OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("Y13_3430_USB1HS_TLL_D7", 0x5e2,
- OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
-
-/* TLL - HSUSB: 12-pin TLL Port 2*/
-MUX_CFG_34XX("AA8_3430_USB2HS_TLL_CLK", 0x5f0,
- OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("AA10_3430_USB2HS_TLL_STP", 0x5f2,
- OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("AA9_3430_USB2HS_TLL_DIR", 0x5f4,
- OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("AB11_3430_USB2HS_TLL_NXT", 0x5f6,
- OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("AB10_3430_USB2HS_TLL_D0", 0x5f8,
- OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("AB9_3430_USB2HS_TLL_D1", 0x5fa,
- OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("W3_3430_USB2HS_TLL_D2", 0x1d4,
- OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("T4_3430_USB2HS_TLL_D3", 0x1de,
- OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("T3_3430_USB2HS_TLL_D4", 0x1d8,
- OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("R3_3430_USB2HS_TLL_D5", 0x1da,
- OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("R4_3430_USB2HS_TLL_D6", 0x1dc,
- OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("T2_3430_USB2HS_TLL_D7", 0x1d6,
- OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLDOWN)
-
-/* TLL - HSUSB: 12-pin TLL Port 3*/
-MUX_CFG_34XX("AA6_3430_USB3HS_TLL_CLK", 0x180,
- OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("AB3_3430_USB3HS_TLL_STP", 0x166,
- OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("AA3_3430_USB3HS_TLL_DIR", 0x168,
- OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("Y3_3430_USB3HS_TLL_NXT", 0x16a,
- OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("AA5_3430_USB3HS_TLL_D0", 0x186,
- OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("Y4_3430_USB3HS_TLL_D1", 0x184,
- OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("Y5_3430_USB3HS_TLL_D2", 0x188,
- OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("W5_3430_USB3HS_TLL_D3", 0x18a,
- OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("AB12_3430_USB3HS_TLL_D4", 0x16c,
- OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("AB13_3430_USB3HS_TLL_D5", 0x16e,
- OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("AA13_3430_USB3HS_TLL_D6", 0x170,
- OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("AA12_3430_USB3HS_TLL_D7", 0x172,
- OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
-
-/* PHY FSUSB: FS Serial for Port 1 (multiple PHY modes supported) */
-MUX_CFG_34XX("AF10_3430_USB1FS_PHY_MM1_RXDP", 0x5d8,
- OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("AG9_3430_USB1FS_PHY_MM1_RXDM", 0x5ee,
- OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("W13_3430_USB1FS_PHY_MM1_RXRCV", 0x5dc,
- OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("W12_3430_USB1FS_PHY_MM1_TXSE0", 0x5de,
- OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("W11_3430_USB1FS_PHY_MM1_TXDAT", 0x5e0,
- OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("Y11_3430_USB1FS_PHY_MM1_TXEN_N", 0x5ea,
- OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_OUTPUT)
-
-/* PHY FSUSB: FS Serial for Port 2 (multiple PHY modes supported) */
-MUX_CFG_34XX("AF7_3430_USB2FS_PHY_MM2_RXDP", 0x5f2,
- OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("AH7_3430_USB2FS_PHY_MM2_RXDM", 0x5f6,
- OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("AB10_3430_USB2FS_PHY_MM2_RXRCV", 0x5f8,
- OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("AB9_3430_USB2FS_PHY_MM2_TXSE0", 0x5fa,
- OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("W3_3430_USB2FS_PHY_MM2_TXDAT", 0x1d4,
- OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("T4_3430_USB2FS_PHY_MM2_TXEN_N", 0x1de,
- OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_OUTPUT)
-
-/* PHY FSUSB: FS Serial for Port 3 (multiple PHY modes supported) */
-MUX_CFG_34XX("AH3_3430_USB3FS_PHY_MM3_RXDP", 0x166,
- OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("AE3_3430_USB3FS_PHY_MM3_RXDM", 0x16a,
- OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("AD1_3430_USB3FS_PHY_MM3_RXRCV", 0x186,
- OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("AE1_3430_USB3FS_PHY_MM3_TXSE0", 0x184,
- OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("AD2_3430_USB3FS_PHY_MM3_TXDAT", 0x188,
- OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("AC1_3430_USB3FS_PHY_MM3_TXEN_N", 0x18a,
- OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_OUTPUT)
-
-
-/* 34XX GPIO - bidirectional, unless the name has an "_OUT" suffix.
- * (Always specify PIN_INPUT, except for names suffixed by "_OUT".)
- * No internal pullup/pulldown without "_UP" or "_DOWN" suffix.
- */
-MUX_CFG_34XX("AF26_34XX_GPIO0", 0x1e0,
- OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
-MUX_CFG_34XX("AF22_34XX_GPIO9", 0xa18,
- OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
-MUX_CFG_34XX("AG9_34XX_GPIO23", 0x5ee,
- OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
-MUX_CFG_34XX("AH8_34XX_GPIO29", 0x5fa,
- OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
-MUX_CFG_34XX("U8_34XX_GPIO54_OUT", 0x0b4,
- OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT)
-MUX_CFG_34XX("U8_34XX_GPIO54_DOWN", 0x0b4,
- OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("L8_34XX_GPIO63", 0x0ce,
- OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
-MUX_CFG_34XX("G25_34XX_GPIO86_OUT", 0x0fc,
- OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT)
-MUX_CFG_34XX("AG4_34XX_GPIO134_OUT", 0x160,
- OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT)
-MUX_CFG_34XX("AF4_34XX_GPIO135_OUT", 0x162,
- OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT)
-MUX_CFG_34XX("AE4_34XX_GPIO136_OUT", 0x164,
- OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT)
-MUX_CFG_34XX("AF6_34XX_GPIO140_UP", 0x16c,
- OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("AE6_34XX_GPIO141", 0x16e,
- OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
-MUX_CFG_34XX("AF5_34XX_GPIO142", 0x170,
- OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
-MUX_CFG_34XX("AE5_34XX_GPIO143", 0x172,
- OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
-MUX_CFG_34XX("H19_34XX_GPIO164_OUT", 0x19c,
- OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT)
-MUX_CFG_34XX("J25_34XX_GPIO170", 0x1c6,
- OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
-
-/* OMAP3 SDRC CKE signals to SDR/DDR ram chips */
-MUX_CFG_34XX("H16_34XX_SDRC_CKE0", 0x262,
- OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT)
-MUX_CFG_34XX("H17_34XX_SDRC_CKE1", 0x264,
- OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT)
-
-/* MMC1 */
-MUX_CFG_34XX("N28_3430_MMC1_CLK", 0x144,
- OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("M27_3430_MMC1_CMD", 0x146,
- OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("N27_3430_MMC1_DAT0", 0x148,
- OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("N26_3430_MMC1_DAT1", 0x14a,
- OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("N25_3430_MMC1_DAT2", 0x14c,
- OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("P28_3430_MMC1_DAT3", 0x14e,
- OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("P27_3430_MMC1_DAT4", 0x150,
- OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("P26_3430_MMC1_DAT5", 0x152,
- OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("R27_3430_MMC1_DAT6", 0x154,
- OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("R25_3430_MMC1_DAT7", 0x156,
- OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
-
-/* MMC2 */
-MUX_CFG_34XX("AE2_3430_MMC2_CLK", 0x158,
- OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("AG5_3430_MMC2_CMD", 0x15A,
- OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("AH5_3430_MMC2_DAT0", 0x15c,
- OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("AH4_3430_MMC2_DAT1", 0x15e,
- OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("AG4_3430_MMC2_DAT2", 0x160,
- OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("AF4_3430_MMC2_DAT3", 0x162,
- OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("AE4_3430_MMC2_DAT4", 0x164,
- OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("AH3_3430_MMC2_DAT5", 0x166,
- OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("AF3_3430_MMC2_DAT6", 0x168,
- OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("AE3_3430_MMC2_DAT7", 0x16A,
- OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
-
-/* MMC3 */
-MUX_CFG_34XX("AF10_3430_MMC3_CLK", 0x5d8,
- OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("AC3_3430_MMC3_CMD", 0x1d0,
- OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("AE11_3430_MMC3_DAT0", 0x5e4,
- OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("AH9_3430_MMC3_DAT1", 0x5e6,
- OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("AF13_3430_MMC3_DAT2", 0x5e8,
- OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("AF13_3430_MMC3_DAT3", 0x5e2,
- OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLUP)
-
-/* SYS_NIRQ T2 INT1 */
-MUX_CFG_34XX("AF26_34XX_SYS_NIRQ", 0x1E0,
- OMAP3_WAKEUP_EN | OMAP34XX_PIN_INPUT_PULLUP |
- OMAP34XX_MUX_MODE0)
-/* EHCI GPIO's on OMAP3EVM (Rev >= E) */
-MUX_CFG_34XX("AH14_34XX_GPIO21", 0x5ea,
- OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("AF9_34XX_GPIO22", 0x5ec,
- OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("U3_34XX_GPIO61", 0x0c8,
- OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT_PULLUP)
-};
-
-#define OMAP34XX_PINS_SZ ARRAY_SIZE(omap34xx_pins)
-
-#else
-#define omap34xx_pins NULL
-#define OMAP34XX_PINS_SZ 0
-#endif /* CONFIG_ARCH_OMAP34XX */
-
#if defined(CONFIG_OMAP_MUX_DEBUG) || defined(CONFIG_OMAP_MUX_WARNINGS)
+
static void __init_or_module omap2_cfg_debug(const struct pin_config *cfg, u16 reg)
{
u16 orig;
u8 warn = 0, debug = 0;
- if (cpu_is_omap24xx())
- orig = omap_ctrl_readb(cfg->mux_reg);
- else
- orig = omap_ctrl_readw(cfg->mux_reg);
+ orig = omap_mux_read(cfg->mux_reg - OMAP_MUX_BASE_OFFSET);
#ifdef CONFIG_OMAP_MUX_DEBUG
debug = cfg->debug;
@@ -600,7 +305,6 @@
#define omap2_cfg_debug(x, y) do {} while (0)
#endif
-#ifdef CONFIG_ARCH_OMAP24XX
static int __init_or_module omap24xx_cfg_reg(const struct pin_config *cfg)
{
static DEFINE_SPINLOCK(mux_spin_lock);
@@ -614,47 +318,692 @@
if (cfg->pu_pd_val)
reg |= OMAP2_PULL_UP;
omap2_cfg_debug(cfg, reg);
- omap_ctrl_writeb(reg, cfg->mux_reg);
+ omap_mux_write(reg, cfg->mux_reg - OMAP_MUX_BASE_OFFSET);
spin_unlock_irqrestore(&mux_spin_lock, flags);
return 0;
}
-#else
-#define omap24xx_cfg_reg NULL
-#endif
-
-#ifdef CONFIG_ARCH_OMAP34XX
-static int __init_or_module omap34xx_cfg_reg(const struct pin_config *cfg)
-{
- static DEFINE_SPINLOCK(mux_spin_lock);
- unsigned long flags;
- u16 reg = 0;
-
- spin_lock_irqsave(&mux_spin_lock, flags);
- reg |= cfg->mux_val;
- omap2_cfg_debug(cfg, reg);
- omap_ctrl_writew(reg, cfg->mux_reg);
- spin_unlock_irqrestore(&mux_spin_lock, flags);
-
- return 0;
-}
-#else
-#define omap34xx_cfg_reg NULL
-#endif
int __init omap2_mux_init(void)
{
+ u32 mux_pbase;
+
+ if (cpu_is_omap2420())
+ mux_pbase = OMAP2420_CTRL_BASE + OMAP_MUX_BASE_OFFSET;
+ else if (cpu_is_omap2430())
+ mux_pbase = OMAP243X_CTRL_BASE + OMAP_MUX_BASE_OFFSET;
+ else
+ return -ENODEV;
+
+ mux_base = ioremap(mux_pbase, OMAP_MUX_BASE_SZ);
+ if (!mux_base) {
+ printk(KERN_ERR "mux: Could not ioremap\n");
+ return -ENODEV;
+ }
+
if (cpu_is_omap24xx()) {
arch_mux_cfg.pins = omap24xx_pins;
arch_mux_cfg.size = OMAP24XX_PINS_SZ;
arch_mux_cfg.cfg_reg = omap24xx_cfg_reg;
- } else if (cpu_is_omap34xx()) {
- arch_mux_cfg.pins = omap34xx_pins;
- arch_mux_cfg.size = OMAP34XX_PINS_SZ;
- arch_mux_cfg.cfg_reg = omap34xx_cfg_reg;
+
+ return omap_mux_register(&arch_mux_cfg);
}
- return omap_mux_register(&arch_mux_cfg);
+ return 0;
}
+#else
+int __init omap2_mux_init(void)
+{
+ return 0;
+}
+#endif /* CONFIG_OMAP_MUX */
+
+/*----------------------------------------------------------------------------*/
+
+#ifdef CONFIG_ARCH_OMAP34XX
+static LIST_HEAD(muxmodes);
+static DEFINE_MUTEX(muxmode_mutex);
+
+#ifdef CONFIG_OMAP_MUX
+
+static char *omap_mux_options;
+
+int __init omap_mux_init_gpio(int gpio, int val)
+{
+ struct omap_mux_entry *e;
+ int found = 0;
+
+ if (!gpio)
+ return -EINVAL;
+
+ list_for_each_entry(e, &muxmodes, node) {
+ struct omap_mux *m = &e->mux;
+ if (gpio == m->gpio) {
+ u16 old_mode;
+ u16 mux_mode;
+
+ old_mode = omap_mux_read(m->reg_offset);
+ mux_mode = val & ~(OMAP_MUX_NR_MODES - 1);
+ mux_mode |= OMAP_MUX_MODE4;
+ printk(KERN_DEBUG "mux: Setting signal "
+ "%s.gpio%i 0x%04x -> 0x%04x\n",
+ m->muxnames[0], gpio, old_mode, mux_mode);
+ omap_mux_write(mux_mode, m->reg_offset);
+ found++;
+ }
+ }
+
+ if (found == 1)
+ return 0;
+
+ if (found > 1) {
+ printk(KERN_ERR "mux: Multiple gpio paths for gpio%i\n", gpio);
+ return -EINVAL;
+ }
+
+ printk(KERN_ERR "mux: Could not set gpio%i\n", gpio);
+
+ return -ENODEV;
+}
+
+int __init omap_mux_init_signal(char *muxname, int val)
+{
+ struct omap_mux_entry *e;
+ char *m0_name = NULL, *mode_name = NULL;
+ int found = 0;
+
+ mode_name = strchr(muxname, '.');
+ if (mode_name) {
+ *mode_name = '\0';
+ mode_name++;
+ m0_name = muxname;
+ } else {
+ mode_name = muxname;
+ }
+
+ list_for_each_entry(e, &muxmodes, node) {
+ struct omap_mux *m = &e->mux;
+ char *m0_entry = m->muxnames[0];
+ int i;
+
+ if (m0_name && strcmp(m0_name, m0_entry))
+ continue;
+
+ for (i = 0; i < OMAP_MUX_NR_MODES; i++) {
+ char *mode_cur = m->muxnames[i];
+
+ if (!mode_cur)
+ continue;
+
+ if (!strcmp(mode_name, mode_cur)) {
+ u16 old_mode;
+ u16 mux_mode;
+
+ old_mode = omap_mux_read(m->reg_offset);
+ mux_mode = val | i;
+ printk(KERN_DEBUG "mux: Setting signal "
+ "%s.%s 0x%04x -> 0x%04x\n",
+ m0_entry, muxname, old_mode, mux_mode);
+ omap_mux_write(mux_mode, m->reg_offset);
+ found++;
+ }
+ }
+ }
+
+ if (found == 1)
+ return 0;
+
+ if (found > 1) {
+ printk(KERN_ERR "mux: Multiple signal paths (%i) for %s\n",
+ found, muxname);
+ return -EINVAL;
+ }
+
+ printk(KERN_ERR "mux: Could not set signal %s\n", muxname);
+
+ return -ENODEV;
+}
+
+#ifdef CONFIG_DEBUG_FS
+
+#define OMAP_MUX_MAX_NR_FLAGS 10
+#define OMAP_MUX_TEST_FLAG(val, mask) \
+ if (((val) & (mask)) == (mask)) { \
+ i++; \
+ flags[i] = #mask; \
+ }
+
+/* REVISIT: Add checking for non-optimal mux settings */
+static inline void omap_mux_decode(struct seq_file *s, u16 val)
+{
+ char *flags[OMAP_MUX_MAX_NR_FLAGS];
+ char mode[14];
+ int i = -1;
+
+ sprintf(mode, "OMAP_MUX_MODE%d", val & 0x7);
+ i++;
+ flags[i] = mode;
+
+ OMAP_MUX_TEST_FLAG(val, OMAP_PIN_OFF_WAKEUPENABLE);
+ if (val & OMAP_OFF_EN) {
+ if (!(val & OMAP_OFFOUT_EN)) {
+ if (!(val & OMAP_OFF_PULL_UP)) {
+ OMAP_MUX_TEST_FLAG(val,
+ OMAP_PIN_OFF_INPUT_PULLDOWN);
+ } else {
+ OMAP_MUX_TEST_FLAG(val,
+ OMAP_PIN_OFF_INPUT_PULLUP);
+ }
+ } else {
+ if (!(val & OMAP_OFFOUT_VAL)) {
+ OMAP_MUX_TEST_FLAG(val,
+ OMAP_PIN_OFF_OUTPUT_LOW);
+ } else {
+ OMAP_MUX_TEST_FLAG(val,
+ OMAP_PIN_OFF_OUTPUT_HIGH);
+ }
+ }
+ }
+
+ if (val & OMAP_INPUT_EN) {
+ if (val & OMAP_PULL_ENA) {
+ if (!(val & OMAP_PULL_UP)) {
+ OMAP_MUX_TEST_FLAG(val,
+ OMAP_PIN_INPUT_PULLDOWN);
+ } else {
+ OMAP_MUX_TEST_FLAG(val, OMAP_PIN_INPUT_PULLUP);
+ }
+ } else {
+ OMAP_MUX_TEST_FLAG(val, OMAP_PIN_INPUT);
+ }
+ } else {
+ i++;
+ flags[i] = "OMAP_PIN_OUTPUT";
+ }
+
+ do {
+ seq_printf(s, "%s", flags[i]);
+ if (i > 0)
+ seq_printf(s, " | ");
+ } while (i-- > 0);
+}
+
+#define OMAP_MUX_DEFNAME_LEN 16
+
+static int omap_mux_dbg_board_show(struct seq_file *s, void *unused)
+{
+ struct omap_mux_entry *e;
+
+ list_for_each_entry(e, &muxmodes, node) {
+ struct omap_mux *m = &e->mux;
+ char m0_def[OMAP_MUX_DEFNAME_LEN];
+ char *m0_name = m->muxnames[0];
+ u16 val;
+ int i, mode;
+
+ if (!m0_name)
+ continue;
+
+ for (i = 0; i < OMAP_MUX_DEFNAME_LEN; i++) {
+ if (m0_name[i] == '\0') {
+ m0_def[i] = m0_name[i];
+ break;
+ }
+ m0_def[i] = toupper(m0_name[i]);
+ }
+ val = omap_mux_read(m->reg_offset);
+ mode = val & OMAP_MUX_MODE7;
+
+ seq_printf(s, "OMAP%i_MUX(%s, ",
+ cpu_is_omap34xx() ? 3 : 0, m0_def);
+ omap_mux_decode(s, val);
+ seq_printf(s, "),\n");
+ }
+
+ return 0;
+}
+
+static int omap_mux_dbg_board_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, omap_mux_dbg_board_show, &inode->i_private);
+}
+
+static const struct file_operations omap_mux_dbg_board_fops = {
+ .open = omap_mux_dbg_board_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static int omap_mux_dbg_signal_show(struct seq_file *s, void *unused)
+{
+ struct omap_mux *m = s->private;
+ const char *none = "NA";
+ u16 val;
+ int mode;
+
+ val = omap_mux_read(m->reg_offset);
+ mode = val & OMAP_MUX_MODE7;
+
+ seq_printf(s, "name: %s.%s (0x%08lx/0x%03x = 0x%04x), b %s, t %s\n",
+ m->muxnames[0], m->muxnames[mode],
+ mux_phys + m->reg_offset, m->reg_offset, val,
+ m->balls[0] ? m->balls[0] : none,
+ m->balls[1] ? m->balls[1] : none);
+ seq_printf(s, "mode: ");
+ omap_mux_decode(s, val);
+ seq_printf(s, "\n");
+ seq_printf(s, "signals: %s | %s | %s | %s | %s | %s | %s | %s\n",
+ m->muxnames[0] ? m->muxnames[0] : none,
+ m->muxnames[1] ? m->muxnames[1] : none,
+ m->muxnames[2] ? m->muxnames[2] : none,
+ m->muxnames[3] ? m->muxnames[3] : none,
+ m->muxnames[4] ? m->muxnames[4] : none,
+ m->muxnames[5] ? m->muxnames[5] : none,
+ m->muxnames[6] ? m->muxnames[6] : none,
+ m->muxnames[7] ? m->muxnames[7] : none);
+
+ return 0;
+}
+
+#define OMAP_MUX_MAX_ARG_CHAR 7
+
+static ssize_t omap_mux_dbg_signal_write(struct file *file,
+ const char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ char buf[OMAP_MUX_MAX_ARG_CHAR];
+ struct seq_file *seqf;
+ struct omap_mux *m;
+ unsigned long val;
+ int buf_size, ret;
+
+ if (count > OMAP_MUX_MAX_ARG_CHAR)
+ return -EINVAL;
+
+ memset(buf, 0, sizeof(buf));
+ buf_size = min(count, sizeof(buf) - 1);
+
+ if (copy_from_user(buf, user_buf, buf_size))
+ return -EFAULT;
+
+ ret = strict_strtoul(buf, 0x10, &val);
+ if (ret < 0)
+ return ret;
+
+ if (val > 0xffff)
+ return -EINVAL;
+
+ seqf = file->private_data;
+ m = seqf->private;
+
+ omap_mux_write((u16)val, m->reg_offset);
+ *ppos += count;
+
+ return count;
+}
+
+static int omap_mux_dbg_signal_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, omap_mux_dbg_signal_show, inode->i_private);
+}
+
+static const struct file_operations omap_mux_dbg_signal_fops = {
+ .open = omap_mux_dbg_signal_open,
+ .read = seq_read,
+ .write = omap_mux_dbg_signal_write,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static struct dentry *mux_dbg_dir;
+
+static void __init omap_mux_dbg_init(void)
+{
+ struct omap_mux_entry *e;
+
+ mux_dbg_dir = debugfs_create_dir("omap_mux", NULL);
+ if (!mux_dbg_dir)
+ return;
+
+ (void)debugfs_create_file("board", S_IRUGO, mux_dbg_dir,
+ NULL, &omap_mux_dbg_board_fops);
+
+ list_for_each_entry(e, &muxmodes, node) {
+ struct omap_mux *m = &e->mux;
+
+ (void)debugfs_create_file(m->muxnames[0], S_IWUGO, mux_dbg_dir,
+ m, &omap_mux_dbg_signal_fops);
+ }
+}
+
+#else
+static inline void omap_mux_dbg_init(void)
+{
+}
+#endif /* CONFIG_DEBUG_FS */
+
+static void __init omap_mux_free_names(struct omap_mux *m)
+{
+ int i;
+
+ for (i = 0; i < OMAP_MUX_NR_MODES; i++)
+ kfree(m->muxnames[i]);
+
+#ifdef CONFIG_DEBUG_FS
+ for (i = 0; i < OMAP_MUX_NR_SIDES; i++)
+ kfree(m->balls[i]);
#endif
+
+}
+
+/* Free all data except for GPIO pins unless CONFIG_DEBUG_FS is set */
+static int __init omap_mux_late_init(void)
+{
+ struct omap_mux_entry *e, *tmp;
+
+ list_for_each_entry_safe(e, tmp, &muxmodes, node) {
+ struct omap_mux *m = &e->mux;
+ u16 mode = omap_mux_read(m->reg_offset);
+
+ if (OMAP_MODE_GPIO(mode))
+ continue;
+
+#ifndef CONFIG_DEBUG_FS
+ mutex_lock(&muxmode_mutex);
+ list_del(&e->node);
+ mutex_unlock(&muxmode_mutex);
+ omap_mux_free_names(m);
+ kfree(m);
+#endif
+
+ }
+
+ omap_mux_dbg_init();
+
+ return 0;
+}
+late_initcall(omap_mux_late_init);
+
+static void __init omap_mux_package_fixup(struct omap_mux *p,
+ struct omap_mux *superset)
+{
+ while (p->reg_offset != OMAP_MUX_TERMINATOR) {
+ struct omap_mux *s = superset;
+ int found = 0;
+
+ while (s->reg_offset != OMAP_MUX_TERMINATOR) {
+ if (s->reg_offset == p->reg_offset) {
+ *s = *p;
+ found++;
+ break;
+ }
+ s++;
+ }
+ if (!found)
+ printk(KERN_ERR "mux: Unknown entry offset 0x%x\n",
+ p->reg_offset);
+ p++;
+ }
+}
+
+#ifdef CONFIG_DEBUG_FS
+
+static void __init omap_mux_package_init_balls(struct omap_ball *b,
+ struct omap_mux *superset)
+{
+ while (b->reg_offset != OMAP_MUX_TERMINATOR) {
+ struct omap_mux *s = superset;
+ int found = 0;
+
+ while (s->reg_offset != OMAP_MUX_TERMINATOR) {
+ if (s->reg_offset == b->reg_offset) {
+ s->balls[0] = b->balls[0];
+ s->balls[1] = b->balls[1];
+ found++;
+ break;
+ }
+ s++;
+ }
+ if (!found)
+ printk(KERN_ERR "mux: Unknown ball offset 0x%x\n",
+ b->reg_offset);
+ b++;
+ }
+}
+
+#else /* CONFIG_DEBUG_FS */
+
+static inline void omap_mux_package_init_balls(struct omap_ball *b,
+ struct omap_mux *superset)
+{
+}
+
+#endif /* CONFIG_DEBUG_FS */
+
+static int __init omap_mux_setup(char *options)
+{
+ if (!options)
+ return 0;
+
+ omap_mux_options = options;
+
+ return 1;
+}
+__setup("omap_mux=", omap_mux_setup);
+
+/*
+ * Note that the omap_mux=some.signal1=0x1234,some.signal2=0x1234
+ * cmdline options only override the bootloader values.
+ * During development, please enable CONFIG_DEBUG_FS, and use the
+ * signal specific entries under debugfs.
+ */
+static void __init omap_mux_set_cmdline_signals(void)
+{
+ char *options, *next_opt, *token;
+
+ if (!omap_mux_options)
+ return;
+
+ options = kmalloc(strlen(omap_mux_options) + 1, GFP_KERNEL);
+ if (!options)
+ return;
+
+ strcpy(options, omap_mux_options);
+ next_opt = options;
+
+ while ((token = strsep(&next_opt, ",")) != NULL) {
+ char *keyval, *name;
+ unsigned long val;
+
+ keyval = token;
+ name = strsep(&keyval, "=");
+ if (name) {
+ int res;
+
+ res = strict_strtoul(keyval, 0x10, &val);
+ if (res < 0)
+ continue;
+
+ omap_mux_init_signal(name, (u16)val);
+ }
+ }
+
+ kfree(options);
+}
+
+static void __init omap_mux_set_board_signals(struct omap_board_mux *board_mux)
+{
+ while (board_mux->reg_offset != OMAP_MUX_TERMINATOR) {
+ omap_mux_write(board_mux->value, board_mux->reg_offset);
+ board_mux++;
+ }
+}
+
+static int __init omap_mux_copy_names(struct omap_mux *src,
+ struct omap_mux *dst)
+{
+ int i;
+
+ for (i = 0; i < OMAP_MUX_NR_MODES; i++) {
+ if (src->muxnames[i]) {
+ dst->muxnames[i] =
+ kmalloc(strlen(src->muxnames[i]) + 1,
+ GFP_KERNEL);
+ if (!dst->muxnames[i])
+ goto free;
+ strcpy(dst->muxnames[i], src->muxnames[i]);
+ }
+ }
+
+#ifdef CONFIG_DEBUG_FS
+ for (i = 0; i < OMAP_MUX_NR_SIDES; i++) {
+ if (src->balls[i]) {
+ dst->balls[i] =
+ kmalloc(strlen(src->balls[i]) + 1,
+ GFP_KERNEL);
+ if (!dst->balls[i])
+ goto free;
+ strcpy(dst->balls[i], src->balls[i]);
+ }
+ }
+#endif
+
+ return 0;
+
+free:
+ omap_mux_free_names(dst);
+ return -ENOMEM;
+
+}
+
+#endif /* CONFIG_OMAP_MUX */
+
+static u16 omap_mux_get_by_gpio(int gpio)
+{
+ struct omap_mux_entry *e;
+ u16 offset = OMAP_MUX_TERMINATOR;
+
+ list_for_each_entry(e, &muxmodes, node) {
+ struct omap_mux *m = &e->mux;
+ if (m->gpio == gpio) {
+ offset = m->reg_offset;
+ break;
+ }
+ }
+
+ return offset;
+}
+
+/* Needed for dynamic muxing of GPIO pins for off-idle */
+u16 omap_mux_get_gpio(int gpio)
+{
+ u16 offset;
+
+ offset = omap_mux_get_by_gpio(gpio);
+ if (offset == OMAP_MUX_TERMINATOR) {
+ printk(KERN_ERR "mux: Could not get gpio%i\n", gpio);
+ return offset;
+ }
+
+ return omap_mux_read(offset);
+}
+
+/* Needed for dynamic muxing of GPIO pins for off-idle */
+void omap_mux_set_gpio(u16 val, int gpio)
+{
+ u16 offset;
+
+ offset = omap_mux_get_by_gpio(gpio);
+ if (offset == OMAP_MUX_TERMINATOR) {
+ printk(KERN_ERR "mux: Could not set gpio%i\n", gpio);
+ return;
+ }
+
+ omap_mux_write(val, offset);
+}
+
+static struct omap_mux * __init omap_mux_list_add(struct omap_mux *src)
+{
+ struct omap_mux_entry *entry;
+ struct omap_mux *m;
+
+ entry = kzalloc(sizeof(struct omap_mux_entry), GFP_KERNEL);
+ if (!entry)
+ return NULL;
+
+ m = &entry->mux;
+ memcpy(m, src, sizeof(struct omap_mux_entry));
+
+#ifdef CONFIG_OMAP_MUX
+ if (omap_mux_copy_names(src, m)) {
+ kfree(entry);
+ return NULL;
+ }
+#endif
+
+ mutex_lock(&muxmode_mutex);
+ list_add_tail(&entry->node, &muxmodes);
+ mutex_unlock(&muxmode_mutex);
+
+ return m;
+}
+
+/*
+ * Note if CONFIG_OMAP_MUX is not selected, we will only initialize
+ * the GPIO to mux offset mapping that is needed for dynamic muxing
+ * of GPIO pins for off-idle.
+ */
+static void __init omap_mux_init_list(struct omap_mux *superset)
+{
+ while (superset->reg_offset != OMAP_MUX_TERMINATOR) {
+ struct omap_mux *entry;
+
+#ifndef CONFIG_OMAP_MUX
+ /* Skip pins that are not muxed as GPIO by bootloader */
+ if (!OMAP_MODE_GPIO(omap_mux_read(superset->reg_offset))) {
+ superset++;
+ continue;
+ }
+#endif
+
+ entry = omap_mux_list_add(superset);
+ if (!entry) {
+ printk(KERN_ERR "mux: Could not add entry\n");
+ return;
+ }
+ superset++;
+ }
+}
+
+int __init omap_mux_init(u32 mux_pbase, u32 mux_size,
+ struct omap_mux *superset,
+ struct omap_mux *package_subset,
+ struct omap_board_mux *board_mux,
+ struct omap_ball *package_balls)
+{
+ if (mux_base)
+ return -EBUSY;
+
+ mux_phys = mux_pbase;
+ mux_base = ioremap(mux_pbase, mux_size);
+ if (!mux_base) {
+ printk(KERN_ERR "mux: Could not ioremap\n");
+ return -ENODEV;
+ }
+
+#ifdef CONFIG_OMAP_MUX
+ omap_mux_package_fixup(package_subset, superset);
+ omap_mux_package_init_balls(package_balls, superset);
+ omap_mux_set_cmdline_signals();
+ omap_mux_set_board_signals(board_mux);
+#endif
+
+ omap_mux_init_list(superset);
+
+ return 0;
+}
+
+#endif /* CONFIG_ARCH_OMAP34XX */
+
diff --git a/arch/arm/mach-omap2/mux.h b/arch/arm/mach-omap2/mux.h
new file mode 100644
index 0000000..d8b4d5a
--- /dev/null
+++ b/arch/arm/mach-omap2/mux.h
@@ -0,0 +1,163 @@
+/*
+ * Copyright (C) 2009 Nokia
+ * Copyright (C) 2009 Texas Instruments
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "mux34xx.h"
+
+#define OMAP_MUX_TERMINATOR 0xffff
+
+/* 34xx mux mode options for each pin. See TRM for options */
+#define OMAP_MUX_MODE0 0
+#define OMAP_MUX_MODE1 1
+#define OMAP_MUX_MODE2 2
+#define OMAP_MUX_MODE3 3
+#define OMAP_MUX_MODE4 4
+#define OMAP_MUX_MODE5 5
+#define OMAP_MUX_MODE6 6
+#define OMAP_MUX_MODE7 7
+
+/* 24xx/34xx mux bit defines */
+#define OMAP_PULL_ENA (1 << 3)
+#define OMAP_PULL_UP (1 << 4)
+#define OMAP_ALTELECTRICALSEL (1 << 5)
+
+/* 34xx specific mux bit defines */
+#define OMAP_INPUT_EN (1 << 8)
+#define OMAP_OFF_EN (1 << 9)
+#define OMAP_OFFOUT_EN (1 << 10)
+#define OMAP_OFFOUT_VAL (1 << 11)
+#define OMAP_OFF_PULL_EN (1 << 12)
+#define OMAP_OFF_PULL_UP (1 << 13)
+#define OMAP_WAKEUP_EN (1 << 14)
+
+/* Active pin states */
+#define OMAP_PIN_OUTPUT 0
+#define OMAP_PIN_INPUT OMAP_INPUT_EN
+#define OMAP_PIN_INPUT_PULLUP (OMAP_PULL_ENA | OMAP_INPUT_EN \
+ | OMAP_PULL_UP)
+#define OMAP_PIN_INPUT_PULLDOWN (OMAP_PULL_ENA | OMAP_INPUT_EN)
+
+/* Off mode states */
+#define OMAP_PIN_OFF_NONE 0
+#define OMAP_PIN_OFF_OUTPUT_HIGH (OMAP_OFF_EN | OMAP_OFFOUT_EN \
+ | OMAP_OFFOUT_VAL)
+#define OMAP_PIN_OFF_OUTPUT_LOW (OMAP_OFF_EN | OMAP_OFFOUT_EN)
+#define OMAP_PIN_OFF_INPUT_PULLUP (OMAP_OFF_EN | OMAP_OFF_PULL_EN \
+ | OMAP_OFF_PULL_UP)
+#define OMAP_PIN_OFF_INPUT_PULLDOWN (OMAP_OFF_EN | OMAP_OFF_PULL_EN)
+#define OMAP_PIN_OFF_WAKEUPENABLE OMAP_WAKEUP_EN
+
+#define OMAP_MODE_GPIO(x) (((x) & OMAP_MUX_MODE7) == OMAP_MUX_MODE4)
+
+/* Flags for omap_mux_init */
+#define OMAP_PACKAGE_MASK 0xffff
+#define OMAP_PACKAGE_CBP 4 /* 515-pin 0.40 0.50 */
+#define OMAP_PACKAGE_CUS 3 /* 423-pin 0.65 */
+#define OMAP_PACKAGE_CBB 2 /* 515-pin 0.40 0.50 */
+#define OMAP_PACKAGE_CBC 1 /* 515-pin 0.50 0.65 */
+
+
+#define OMAP_MUX_NR_MODES 8 /* Available modes */
+#define OMAP_MUX_NR_SIDES 2 /* Bottom & top */
+
+/**
+ * struct omap_mux - data for omap mux register offset and it's value
+ * @reg_offset: mux register offset from the mux base
+ * @gpio: GPIO number
+ * @muxnames: available signal modes for a ball
+ */
+struct omap_mux {
+ u16 reg_offset;
+ u16 gpio;
+#ifdef CONFIG_OMAP_MUX
+ char *muxnames[OMAP_MUX_NR_MODES];
+#ifdef CONFIG_DEBUG_FS
+ char *balls[OMAP_MUX_NR_SIDES];
+#endif
+#endif
+};
+
+/**
+ * struct omap_ball - data for balls on omap package
+ * @reg_offset: mux register offset from the mux base
+ * @balls: available balls on the package
+ */
+struct omap_ball {
+ u16 reg_offset;
+ char *balls[OMAP_MUX_NR_SIDES];
+};
+
+/**
+ * struct omap_board_mux - data for initializing mux registers
+ * @reg_offset: mux register offset from the mux base
+ * @mux_value: desired mux value to set
+ */
+struct omap_board_mux {
+ u16 reg_offset;
+ u16 value;
+};
+
+#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_ARCH_OMAP34XX)
+
+/**
+ * omap_mux_init_gpio - initialize a signal based on the GPIO number
+ * @gpio: GPIO number
+ * @val: Options for the mux register value
+ */
+int omap_mux_init_gpio(int gpio, int val);
+
+/**
+ * omap_mux_init_signal - initialize a signal based on the signal name
+ * @muxname: Mux name in mode0_name.signal_name format
+ * @val: Options for the mux register value
+ */
+int omap_mux_init_signal(char *muxname, int val);
+
+#else
+
+static inline int omap_mux_init_gpio(int gpio, int val)
+{
+ return 0;
+}
+static inline int omap_mux_init_signal(char *muxname, int val)
+{
+ return 0;
+}
+
+#endif
+
+/**
+ * omap_mux_get_gpio() - get mux register value based on GPIO number
+ * @gpio: GPIO number
+ *
+ */
+u16 omap_mux_get_gpio(int gpio);
+
+/**
+ * omap_mux_set_gpio() - set mux register value based on GPIO number
+ * @val: New mux register value
+ * @gpio: GPIO number
+ *
+ */
+void omap_mux_set_gpio(u16 val, int gpio);
+
+/**
+ * omap3_mux_init() - initialize mux system with board specific set
+ * @board_mux: Board specific mux table
+ * @flags: OMAP package type used for the board
+ */
+int omap3_mux_init(struct omap_board_mux *board_mux, int flags);
+
+/**
+ * omap_mux_init - private mux init function, do not call
+ */
+int omap_mux_init(u32 mux_pbase, u32 mux_size,
+ struct omap_mux *superset,
+ struct omap_mux *package_subset,
+ struct omap_board_mux *board_mux,
+ struct omap_ball *package_balls);
diff --git a/arch/arm/mach-omap2/mux34xx.c b/arch/arm/mach-omap2/mux34xx.c
new file mode 100644
index 0000000..68e0a59
--- /dev/null
+++ b/arch/arm/mach-omap2/mux34xx.c
@@ -0,0 +1,2099 @@
+/*
+ * Copyright (C) 2009 Nokia
+ * Copyright (C) 2009 Texas Instruments
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+
+#include "mux.h"
+
+#ifdef CONFIG_OMAP_MUX
+
+#define _OMAP3_MUXENTRY(M0, g, m0, m1, m2, m3, m4, m5, m6, m7) \
+{ \
+ .reg_offset = (OMAP3_CONTROL_PADCONF_##M0##_OFFSET), \
+ .gpio = (g), \
+ .muxnames = { m0, m1, m2, m3, m4, m5, m6, m7 }, \
+}
+
+#else
+
+#define _OMAP3_MUXENTRY(M0, g, m0, m1, m2, m3, m4, m5, m6, m7) \
+{ \
+ .reg_offset = (OMAP3_CONTROL_PADCONF_##M0##_OFFSET), \
+ .gpio = (g), \
+}
+
+#endif
+
+#define _OMAP3_BALLENTRY(M0, bb, bt) \
+{ \
+ .reg_offset = (OMAP3_CONTROL_PADCONF_##M0##_OFFSET), \
+ .balls = { bb, bt }, \
+}
+
+/*
+ * Superset of all mux modes for omap3
+ */
+static struct omap_mux __initdata omap3_muxmodes[] = {
+ _OMAP3_MUXENTRY(CAM_D0, 99,
+ "cam_d0", NULL, NULL, NULL,
+ "gpio_99", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CAM_D1, 100,
+ "cam_d1", NULL, NULL, NULL,
+ "gpio_100", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CAM_D10, 109,
+ "cam_d10", NULL, NULL, NULL,
+ "gpio_109", "hw_dbg8", NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CAM_D11, 110,
+ "cam_d11", NULL, NULL, NULL,
+ "gpio_110", "hw_dbg9", NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CAM_D2, 101,
+ "cam_d2", NULL, NULL, NULL,
+ "gpio_101", "hw_dbg4", NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CAM_D3, 102,
+ "cam_d3", NULL, NULL, NULL,
+ "gpio_102", "hw_dbg5", NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CAM_D4, 103,
+ "cam_d4", NULL, NULL, NULL,
+ "gpio_103", "hw_dbg6", NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CAM_D5, 104,
+ "cam_d5", NULL, NULL, NULL,
+ "gpio_104", "hw_dbg7", NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CAM_D6, 105,
+ "cam_d6", NULL, NULL, NULL,
+ "gpio_105", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CAM_D7, 106,
+ "cam_d7", NULL, NULL, NULL,
+ "gpio_106", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CAM_D8, 107,
+ "cam_d8", NULL, NULL, NULL,
+ "gpio_107", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CAM_D9, 108,
+ "cam_d9", NULL, NULL, NULL,
+ "gpio_108", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CAM_FLD, 98,
+ "cam_fld", NULL, "cam_global_reset", NULL,
+ "gpio_98", "hw_dbg3", NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CAM_HS, 94,
+ "cam_hs", NULL, NULL, NULL,
+ "gpio_94", "hw_dbg0", NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CAM_PCLK, 97,
+ "cam_pclk", NULL, NULL, NULL,
+ "gpio_97", "hw_dbg2", NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CAM_STROBE, 126,
+ "cam_strobe", NULL, NULL, NULL,
+ "gpio_126", "hw_dbg11", NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CAM_VS, 95,
+ "cam_vs", NULL, NULL, NULL,
+ "gpio_95", "hw_dbg1", NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CAM_WEN, 167,
+ "cam_wen", NULL, "cam_shutter", NULL,
+ "gpio_167", "hw_dbg10", NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CAM_XCLKA, 96,
+ "cam_xclka", NULL, NULL, NULL,
+ "gpio_96", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CAM_XCLKB, 111,
+ "cam_xclkb", NULL, NULL, NULL,
+ "gpio_111", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CSI2_DX0, 112,
+ "csi2_dx0", NULL, NULL, NULL,
+ "gpio_112", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CSI2_DX1, 114,
+ "csi2_dx1", NULL, NULL, NULL,
+ "gpio_114", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CSI2_DY0, 113,
+ "csi2_dy0", NULL, NULL, NULL,
+ "gpio_113", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CSI2_DY1, 115,
+ "csi2_dy1", NULL, NULL, NULL,
+ "gpio_115", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(DSS_ACBIAS, 69,
+ "dss_acbias", NULL, NULL, NULL,
+ "gpio_69", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(DSS_DATA0, 70,
+ "dss_data0", NULL, "uart1_cts", NULL,
+ "gpio_70", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(DSS_DATA1, 71,
+ "dss_data1", NULL, "uart1_rts", NULL,
+ "gpio_71", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(DSS_DATA10, 80,
+ "dss_data10", NULL, NULL, NULL,
+ "gpio_80", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(DSS_DATA11, 81,
+ "dss_data11", NULL, NULL, NULL,
+ "gpio_81", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(DSS_DATA12, 82,
+ "dss_data12", NULL, NULL, NULL,
+ "gpio_82", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(DSS_DATA13, 83,
+ "dss_data13", NULL, NULL, NULL,
+ "gpio_83", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(DSS_DATA14, 84,
+ "dss_data14", NULL, NULL, NULL,
+ "gpio_84", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(DSS_DATA15, 85,
+ "dss_data15", NULL, NULL, NULL,
+ "gpio_85", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(DSS_DATA16, 86,
+ "dss_data16", NULL, NULL, NULL,
+ "gpio_86", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(DSS_DATA17, 87,
+ "dss_data17", NULL, NULL, NULL,
+ "gpio_87", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(DSS_DATA18, 88,
+ "dss_data18", NULL, "mcspi3_clk", "dss_data0",
+ "gpio_88", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(DSS_DATA19, 89,
+ "dss_data19", NULL, "mcspi3_simo", "dss_data1",
+ "gpio_89", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(DSS_DATA20, 90,
+ "dss_data20", NULL, "mcspi3_somi", "dss_data2",
+ "gpio_90", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(DSS_DATA21, 91,
+ "dss_data21", NULL, "mcspi3_cs0", "dss_data3",
+ "gpio_91", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(DSS_DATA22, 92,
+ "dss_data22", NULL, "mcspi3_cs1", "dss_data4",
+ "gpio_92", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(DSS_DATA23, 93,
+ "dss_data23", NULL, NULL, "dss_data5",
+ "gpio_93", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(DSS_DATA2, 72,
+ "dss_data2", NULL, NULL, NULL,
+ "gpio_72", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(DSS_DATA3, 73,
+ "dss_data3", NULL, NULL, NULL,
+ "gpio_73", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(DSS_DATA4, 74,
+ "dss_data4", NULL, "uart3_rx_irrx", NULL,
+ "gpio_74", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(DSS_DATA5, 75,
+ "dss_data5", NULL, "uart3_tx_irtx", NULL,
+ "gpio_75", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(DSS_DATA6, 76,
+ "dss_data6", NULL, "uart1_tx", NULL,
+ "gpio_76", "hw_dbg14", NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(DSS_DATA7, 77,
+ "dss_data7", NULL, "uart1_rx", NULL,
+ "gpio_77", "hw_dbg15", NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(DSS_DATA8, 78,
+ "dss_data8", NULL, NULL, NULL,
+ "gpio_78", "hw_dbg16", NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(DSS_DATA9, 79,
+ "dss_data9", NULL, NULL, NULL,
+ "gpio_79", "hw_dbg17", NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(DSS_HSYNC, 67,
+ "dss_hsync", NULL, NULL, NULL,
+ "gpio_67", "hw_dbg13", NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(DSS_PCLK, 66,
+ "dss_pclk", NULL, NULL, NULL,
+ "gpio_66", "hw_dbg12", NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(DSS_VSYNC, 68,
+ "dss_vsync", NULL, NULL, NULL,
+ "gpio_68", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(ETK_CLK, 12,
+ "etk_clk", "mcbsp5_clkx", "sdmmc3_clk", "hsusb1_stp",
+ "gpio_12", "mm1_rxdp", "hsusb1_tll_stp", "hw_dbg0"),
+ _OMAP3_MUXENTRY(ETK_CTL, 13,
+ "etk_ctl", NULL, "sdmmc3_cmd", "hsusb1_clk",
+ "gpio_13", NULL, "hsusb1_tll_clk", "hw_dbg1"),
+ _OMAP3_MUXENTRY(ETK_D0, 14,
+ "etk_d0", "mcspi3_simo", "sdmmc3_dat4", "hsusb1_data0",
+ "gpio_14", "mm1_rxrcv", "hsusb1_tll_data0", "hw_dbg2"),
+ _OMAP3_MUXENTRY(ETK_D1, 15,
+ "etk_d1", "mcspi3_somi", NULL, "hsusb1_data1",
+ "gpio_15", "mm1_txse0", "hsusb1_tll_data1", "hw_dbg3"),
+ _OMAP3_MUXENTRY(ETK_D10, 24,
+ "etk_d10", NULL, "uart1_rx", "hsusb2_clk",
+ "gpio_24", NULL, "hsusb2_tll_clk", "hw_dbg12"),
+ _OMAP3_MUXENTRY(ETK_D11, 25,
+ "etk_d11", NULL, NULL, "hsusb2_stp",
+ "gpio_25", "mm2_rxdp", "hsusb2_tll_stp", "hw_dbg13"),
+ _OMAP3_MUXENTRY(ETK_D12, 26,
+ "etk_d12", NULL, NULL, "hsusb2_dir",
+ "gpio_26", NULL, "hsusb2_tll_dir", "hw_dbg14"),
+ _OMAP3_MUXENTRY(ETK_D13, 27,
+ "etk_d13", NULL, NULL, "hsusb2_nxt",
+ "gpio_27", "mm2_rxdm", "hsusb2_tll_nxt", "hw_dbg15"),
+ _OMAP3_MUXENTRY(ETK_D14, 28,
+ "etk_d14", NULL, NULL, "hsusb2_data0",
+ "gpio_28", "mm2_rxrcv", "hsusb2_tll_data0", "hw_dbg16"),
+ _OMAP3_MUXENTRY(ETK_D15, 29,
+ "etk_d15", NULL, NULL, "hsusb2_data1",
+ "gpio_29", "mm2_txse0", "hsusb2_tll_data1", "hw_dbg17"),
+ _OMAP3_MUXENTRY(ETK_D2, 16,
+ "etk_d2", "mcspi3_cs0", NULL, "hsusb1_data2",
+ "gpio_16", "mm1_txdat", "hsusb1_tll_data2", "hw_dbg4"),
+ _OMAP3_MUXENTRY(ETK_D3, 17,
+ "etk_d3", "mcspi3_clk", "sdmmc3_dat3", "hsusb1_data7",
+ "gpio_17", NULL, "hsusb1_tll_data7", "hw_dbg5"),
+ _OMAP3_MUXENTRY(ETK_D4, 18,
+ "etk_d4", "mcbsp5_dr", "sdmmc3_dat0", "hsusb1_data4",
+ "gpio_18", NULL, "hsusb1_tll_data4", "hw_dbg6"),
+ _OMAP3_MUXENTRY(ETK_D5, 19,
+ "etk_d5", "mcbsp5_fsx", "sdmmc3_dat1", "hsusb1_data5",
+ "gpio_19", NULL, "hsusb1_tll_data5", "hw_dbg7"),
+ _OMAP3_MUXENTRY(ETK_D6, 20,
+ "etk_d6", "mcbsp5_dx", "sdmmc3_dat2", "hsusb1_data6",
+ "gpio_20", NULL, "hsusb1_tll_data6", "hw_dbg8"),
+ _OMAP3_MUXENTRY(ETK_D7, 21,
+ "etk_d7", "mcspi3_cs1", "sdmmc3_dat7", "hsusb1_data3",
+ "gpio_21", "mm1_txen_n", "hsusb1_tll_data3", "hw_dbg9"),
+ _OMAP3_MUXENTRY(ETK_D8, 22,
+ "etk_d8", "sys_drm_msecure", "sdmmc3_dat6", "hsusb1_dir",
+ "gpio_22", NULL, "hsusb1_tll_dir", "hw_dbg10"),
+ _OMAP3_MUXENTRY(ETK_D9, 23,
+ "etk_d9", "sys_secure_indicator", "sdmmc3_dat5", "hsusb1_nxt",
+ "gpio_23", "mm1_rxdm", "hsusb1_tll_nxt", "hw_dbg11"),
+ _OMAP3_MUXENTRY(GPMC_A1, 34,
+ "gpmc_a1", NULL, NULL, NULL,
+ "gpio_34", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(GPMC_A10, 43,
+ "gpmc_a10", "sys_ndmareq3", NULL, NULL,
+ "gpio_43", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(GPMC_A2, 35,
+ "gpmc_a2", NULL, NULL, NULL,
+ "gpio_35", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(GPMC_A3, 36,
+ "gpmc_a3", NULL, NULL, NULL,
+ "gpio_36", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(GPMC_A4, 37,
+ "gpmc_a4", NULL, NULL, NULL,
+ "gpio_37", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(GPMC_A5, 38,
+ "gpmc_a5", NULL, NULL, NULL,
+ "gpio_38", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(GPMC_A6, 39,
+ "gpmc_a6", NULL, NULL, NULL,
+ "gpio_39", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(GPMC_A7, 40,
+ "gpmc_a7", NULL, NULL, NULL,
+ "gpio_40", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(GPMC_A8, 41,
+ "gpmc_a8", NULL, NULL, NULL,
+ "gpio_41", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(GPMC_A9, 42,
+ "gpmc_a9", "sys_ndmareq2", NULL, NULL,
+ "gpio_42", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(GPMC_CLK, 59,
+ "gpmc_clk", NULL, NULL, NULL,
+ "gpio_59", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(GPMC_D10, 46,
+ "gpmc_d10", NULL, NULL, NULL,
+ "gpio_46", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(GPMC_D11, 47,
+ "gpmc_d11", NULL, NULL, NULL,
+ "gpio_47", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(GPMC_D12, 48,
+ "gpmc_d12", NULL, NULL, NULL,
+ "gpio_48", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(GPMC_D13, 49,
+ "gpmc_d13", NULL, NULL, NULL,
+ "gpio_49", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(GPMC_D14, 50,
+ "gpmc_d14", NULL, NULL, NULL,
+ "gpio_50", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(GPMC_D15, 51,
+ "gpmc_d15", NULL, NULL, NULL,
+ "gpio_51", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(GPMC_D8, 44,
+ "gpmc_d8", NULL, NULL, NULL,
+ "gpio_44", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(GPMC_D9, 45,
+ "gpmc_d9", NULL, NULL, NULL,
+ "gpio_45", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(GPMC_NBE0_CLE, 60,
+ "gpmc_nbe0_cle", NULL, NULL, NULL,
+ "gpio_60", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(GPMC_NBE1, 61,
+ "gpmc_nbe1", NULL, NULL, NULL,
+ "gpio_61", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(GPMC_NCS1, 52,
+ "gpmc_ncs1", NULL, NULL, NULL,
+ "gpio_52", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(GPMC_NCS2, 53,
+ "gpmc_ncs2", NULL, NULL, NULL,
+ "gpio_53", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(GPMC_NCS3, 54,
+ "gpmc_ncs3", "sys_ndmareq0", NULL, NULL,
+ "gpio_54", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(GPMC_NCS4, 55,
+ "gpmc_ncs4", "sys_ndmareq1", "mcbsp4_clkx", "gpt9_pwm_evt",
+ "gpio_55", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(GPMC_NCS5, 56,
+ "gpmc_ncs5", "sys_ndmareq2", "mcbsp4_dr", "gpt10_pwm_evt",
+ "gpio_56", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(GPMC_NCS6, 57,
+ "gpmc_ncs6", "sys_ndmareq3", "mcbsp4_dx", "gpt11_pwm_evt",
+ "gpio_57", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(GPMC_NCS7, 58,
+ "gpmc_ncs7", "gpmc_io_dir", "mcbsp4_fsx", "gpt8_pwm_evt",
+ "gpio_58", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(GPMC_NWP, 62,
+ "gpmc_nwp", NULL, NULL, NULL,
+ "gpio_62", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(GPMC_WAIT1, 63,
+ "gpmc_wait1", NULL, NULL, NULL,
+ "gpio_63", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(GPMC_WAIT2, 64,
+ "gpmc_wait2", NULL, NULL, NULL,
+ "gpio_64", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(GPMC_WAIT3, 65,
+ "gpmc_wait3", "sys_ndmareq1", NULL, NULL,
+ "gpio_65", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(HDQ_SIO, 170,
+ "hdq_sio", "sys_altclk", "i2c2_sccbe", "i2c3_sccbe",
+ "gpio_170", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(HSUSB0_CLK, 120,
+ "hsusb0_clk", NULL, NULL, NULL,
+ "gpio_120", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(HSUSB0_DATA0, 125,
+ "hsusb0_data0", NULL, "uart3_tx_irtx", NULL,
+ "gpio_125", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(HSUSB0_DATA1, 130,
+ "hsusb0_data1", NULL, "uart3_rx_irrx", NULL,
+ "gpio_130", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(HSUSB0_DATA2, 131,
+ "hsusb0_data2", NULL, "uart3_rts_sd", NULL,
+ "gpio_131", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(HSUSB0_DATA3, 169,
+ "hsusb0_data3", NULL, "uart3_cts_rctx", NULL,
+ "gpio_169", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(HSUSB0_DATA4, 188,
+ "hsusb0_data4", NULL, NULL, NULL,
+ "gpio_188", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(HSUSB0_DATA5, 189,
+ "hsusb0_data5", NULL, NULL, NULL,
+ "gpio_189", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(HSUSB0_DATA6, 190,
+ "hsusb0_data6", NULL, NULL, NULL,
+ "gpio_190", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(HSUSB0_DATA7, 191,
+ "hsusb0_data7", NULL, NULL, NULL,
+ "gpio_191", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(HSUSB0_DIR, 122,
+ "hsusb0_dir", NULL, NULL, NULL,
+ "gpio_122", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(HSUSB0_NXT, 124,
+ "hsusb0_nxt", NULL, NULL, NULL,
+ "gpio_124", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(HSUSB0_STP, 121,
+ "hsusb0_stp", NULL, NULL, NULL,
+ "gpio_121", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(I2C2_SCL, 168,
+ "i2c2_scl", NULL, NULL, NULL,
+ "gpio_168", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(I2C2_SDA, 183,
+ "i2c2_sda", NULL, NULL, NULL,
+ "gpio_183", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(I2C3_SCL, 184,
+ "i2c3_scl", NULL, NULL, NULL,
+ "gpio_184", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(I2C3_SDA, 185,
+ "i2c3_sda", NULL, NULL, NULL,
+ "gpio_185", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(I2C4_SCL, 0,
+ "i2c4_scl", "sys_nvmode1", NULL, NULL,
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(I2C4_SDA, 0,
+ "i2c4_sda", "sys_nvmode2", NULL, NULL,
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(JTAG_EMU0, 11,
+ "jtag_emu0", NULL, NULL, NULL,
+ "gpio_11", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(JTAG_EMU1, 31,
+ "jtag_emu1", NULL, NULL, NULL,
+ "gpio_31", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(MCBSP1_CLKR, 156,
+ "mcbsp1_clkr", "mcspi4_clk", NULL, NULL,
+ "gpio_156", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(MCBSP1_CLKX, 162,
+ "mcbsp1_clkx", NULL, "mcbsp3_clkx", NULL,
+ "gpio_162", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(MCBSP1_DR, 159,
+ "mcbsp1_dr", "mcspi4_somi", "mcbsp3_dr", NULL,
+ "gpio_159", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(MCBSP1_DX, 158,
+ "mcbsp1_dx", "mcspi4_simo", "mcbsp3_dx", NULL,
+ "gpio_158", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(MCBSP1_FSR, 157,
+ "mcbsp1_fsr", NULL, "cam_global_reset", NULL,
+ "gpio_157", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(MCBSP1_FSX, 161,
+ "mcbsp1_fsx", "mcspi4_cs0", "mcbsp3_fsx", NULL,
+ "gpio_161", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(MCBSP2_CLKX, 117,
+ "mcbsp2_clkx", NULL, NULL, NULL,
+ "gpio_117", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(MCBSP2_DR, 118,
+ "mcbsp2_dr", NULL, NULL, NULL,
+ "gpio_118", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(MCBSP2_DX, 119,
+ "mcbsp2_dx", NULL, NULL, NULL,
+ "gpio_119", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(MCBSP2_FSX, 116,
+ "mcbsp2_fsx", NULL, NULL, NULL,
+ "gpio_116", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(MCBSP3_CLKX, 142,
+ "mcbsp3_clkx", "uart2_tx", NULL, NULL,
+ "gpio_142", "hsusb3_tll_data6", NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(MCBSP3_DR, 141,
+ "mcbsp3_dr", "uart2_rts", NULL, NULL,
+ "gpio_141", "hsusb3_tll_data5", NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(MCBSP3_DX, 140,
+ "mcbsp3_dx", "uart2_cts", NULL, NULL,
+ "gpio_140", "hsusb3_tll_data4", NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(MCBSP3_FSX, 143,
+ "mcbsp3_fsx", "uart2_rx", NULL, NULL,
+ "gpio_143", "hsusb3_tll_data7", NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(MCBSP4_CLKX, 152,
+ "mcbsp4_clkx", NULL, NULL, NULL,
+ "gpio_152", "hsusb3_tll_data1", "mm3_txse0", "safe_mode"),
+ _OMAP3_MUXENTRY(MCBSP4_DR, 153,
+ "mcbsp4_dr", NULL, NULL, NULL,
+ "gpio_153", "hsusb3_tll_data0", "mm3_rxrcv", "safe_mode"),
+ _OMAP3_MUXENTRY(MCBSP4_DX, 154,
+ "mcbsp4_dx", NULL, NULL, NULL,
+ "gpio_154", "hsusb3_tll_data2", "mm3_txdat", "safe_mode"),
+ _OMAP3_MUXENTRY(MCBSP4_FSX, 155,
+ "mcbsp4_fsx", NULL, NULL, NULL,
+ "gpio_155", "hsusb3_tll_data3", "mm3_txen_n", "safe_mode"),
+ _OMAP3_MUXENTRY(MCBSP_CLKS, 160,
+ "mcbsp_clks", NULL, "cam_shutter", NULL,
+ "gpio_160", "uart1_cts", NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(MCSPI1_CLK, 171,
+ "mcspi1_clk", "sdmmc2_dat4", NULL, NULL,
+ "gpio_171", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(MCSPI1_CS0, 174,
+ "mcspi1_cs0", "sdmmc2_dat7", NULL, NULL,
+ "gpio_174", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(MCSPI1_CS1, 175,
+ "mcspi1_cs1", NULL, NULL, "sdmmc3_cmd",
+ "gpio_175", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(MCSPI1_CS2, 176,
+ "mcspi1_cs2", NULL, NULL, "sdmmc3_clk",
+ "gpio_176", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(MCSPI1_CS3, 177,
+ "mcspi1_cs3", NULL, "hsusb2_tll_data2", "hsusb2_data2",
+ "gpio_177", "mm2_txdat", NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(MCSPI1_SIMO, 172,
+ "mcspi1_simo", "sdmmc2_dat5", NULL, NULL,
+ "gpio_172", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(MCSPI1_SOMI, 173,
+ "mcspi1_somi", "sdmmc2_dat6", NULL, NULL,
+ "gpio_173", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(MCSPI2_CLK, 178,
+ "mcspi2_clk", NULL, "hsusb2_tll_data7", "hsusb2_data7",
+ "gpio_178", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(MCSPI2_CS0, 181,
+ "mcspi2_cs0", "gpt11_pwm_evt",
+ "hsusb2_tll_data6", "hsusb2_data6",
+ "gpio_181", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(MCSPI2_CS1, 182,
+ "mcspi2_cs1", "gpt8_pwm_evt",
+ "hsusb2_tll_data3", "hsusb2_data3",
+ "gpio_182", "mm2_txen_n", NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(MCSPI2_SIMO, 179,
+ "mcspi2_simo", "gpt9_pwm_evt",
+ "hsusb2_tll_data4", "hsusb2_data4",
+ "gpio_179", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(MCSPI2_SOMI, 180,
+ "mcspi2_somi", "gpt10_pwm_evt",
+ "hsusb2_tll_data5", "hsusb2_data5",
+ "gpio_180", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(SDMMC1_CLK, 120,
+ "sdmmc1_clk", NULL, NULL, NULL,
+ "gpio_120", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(SDMMC1_CMD, 121,
+ "sdmmc1_cmd", NULL, NULL, NULL,
+ "gpio_121", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(SDMMC1_DAT0, 122,
+ "sdmmc1_dat0", NULL, NULL, NULL,
+ "gpio_122", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(SDMMC1_DAT1, 123,
+ "sdmmc1_dat1", NULL, NULL, NULL,
+ "gpio_123", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(SDMMC1_DAT2, 124,
+ "sdmmc1_dat2", NULL, NULL, NULL,
+ "gpio_124", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(SDMMC1_DAT3, 125,
+ "sdmmc1_dat3", NULL, NULL, NULL,
+ "gpio_125", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(SDMMC1_DAT4, 126,
+ "sdmmc1_dat4", NULL, "sim_io", NULL,
+ "gpio_126", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(SDMMC1_DAT5, 127,
+ "sdmmc1_dat5", NULL, "sim_clk", NULL,
+ "gpio_127", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(SDMMC1_DAT6, 128,
+ "sdmmc1_dat6", NULL, "sim_pwrctrl", NULL,
+ "gpio_128", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(SDMMC1_DAT7, 129,
+ "sdmmc1_dat7", NULL, "sim_rst", NULL,
+ "gpio_129", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(SDMMC2_CLK, 130,
+ "sdmmc2_clk", "mcspi3_clk", NULL, NULL,
+ "gpio_130", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(SDMMC2_CMD, 131,
+ "sdmmc2_cmd", "mcspi3_simo", NULL, NULL,
+ "gpio_131", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(SDMMC2_DAT0, 132,
+ "sdmmc2_dat0", "mcspi3_somi", NULL, NULL,
+ "gpio_132", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(SDMMC2_DAT1, 133,
+ "sdmmc2_dat1", NULL, NULL, NULL,
+ "gpio_133", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(SDMMC2_DAT2, 134,
+ "sdmmc2_dat2", "mcspi3_cs1", NULL, NULL,
+ "gpio_134", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(SDMMC2_DAT3, 135,
+ "sdmmc2_dat3", "mcspi3_cs0", NULL, NULL,
+ "gpio_135", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(SDMMC2_DAT4, 136,
+ "sdmmc2_dat4", "sdmmc2_dir_dat0", NULL, "sdmmc3_dat0",
+ "gpio_136", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(SDMMC2_DAT5, 137,
+ "sdmmc2_dat5", "sdmmc2_dir_dat1",
+ "cam_global_reset", "sdmmc3_dat1",
+ "gpio_137", "hsusb3_tll_stp", "mm3_rxdp", "safe_mode"),
+ _OMAP3_MUXENTRY(SDMMC2_DAT6, 138,
+ "sdmmc2_dat6", "sdmmc2_dir_cmd", "cam_shutter", "sdmmc3_dat2",
+ "gpio_138", "hsusb3_tll_dir", NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(SDMMC2_DAT7, 139,
+ "sdmmc2_dat7", "sdmmc2_clkin", NULL, "sdmmc3_dat3",
+ "gpio_139", "hsusb3_tll_nxt", "mm3_rxdm", "safe_mode"),
+ _OMAP3_MUXENTRY(SDRC_CKE0, 0,
+ "sdrc_cke0", NULL, NULL, NULL,
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(SDRC_CKE1, 0,
+ "sdrc_cke1", NULL, NULL, NULL,
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(SYS_BOOT0, 2,
+ "sys_boot0", NULL, NULL, NULL,
+ "gpio_2", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(SYS_BOOT1, 3,
+ "sys_boot1", NULL, NULL, NULL,
+ "gpio_3", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(SYS_BOOT2, 4,
+ "sys_boot2", NULL, NULL, NULL,
+ "gpio_4", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(SYS_BOOT3, 5,
+ "sys_boot3", NULL, NULL, NULL,
+ "gpio_5", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(SYS_BOOT4, 6,
+ "sys_boot4", "sdmmc2_dir_dat2", NULL, NULL,
+ "gpio_6", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(SYS_BOOT5, 7,
+ "sys_boot5", "sdmmc2_dir_dat3", NULL, NULL,
+ "gpio_7", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(SYS_BOOT6, 8,
+ "sys_boot6", NULL, NULL, NULL,
+ "gpio_8", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(SYS_CLKOUT1, 10,
+ "sys_clkout1", NULL, NULL, NULL,
+ "gpio_10", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(SYS_CLKOUT2, 186,
+ "sys_clkout2", NULL, NULL, NULL,
+ "gpio_186", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(SYS_CLKREQ, 1,
+ "sys_clkreq", NULL, NULL, NULL,
+ "gpio_1", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(SYS_NIRQ, 0,
+ "sys_nirq", NULL, NULL, NULL,
+ "gpio_0", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(SYS_NRESWARM, 30,
+ "sys_nreswarm", NULL, NULL, NULL,
+ "gpio_30", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(SYS_OFF_MODE, 9,
+ "sys_off_mode", NULL, NULL, NULL,
+ "gpio_9", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(UART1_CTS, 150,
+ "uart1_cts", NULL, NULL, NULL,
+ "gpio_150", "hsusb3_tll_clk", NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(UART1_RTS, 149,
+ "uart1_rts", NULL, NULL, NULL,
+ "gpio_149", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(UART1_RX, 151,
+ "uart1_rx", NULL, "mcbsp1_clkr", "mcspi4_clk",
+ "gpio_151", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(UART1_TX, 148,
+ "uart1_tx", NULL, NULL, NULL,
+ "gpio_148", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(UART2_CTS, 144,
+ "uart2_cts", "mcbsp3_dx", "gpt9_pwm_evt", NULL,
+ "gpio_144", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(UART2_RTS, 145,
+ "uart2_rts", "mcbsp3_dr", "gpt10_pwm_evt", NULL,
+ "gpio_145", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(UART2_RX, 147,
+ "uart2_rx", "mcbsp3_fsx", "gpt8_pwm_evt", NULL,
+ "gpio_147", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(UART2_TX, 146,
+ "uart2_tx", "mcbsp3_clkx", "gpt11_pwm_evt", NULL,
+ "gpio_146", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(UART3_CTS_RCTX, 163,
+ "uart3_cts_rctx", NULL, NULL, NULL,
+ "gpio_163", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(UART3_RTS_SD, 164,
+ "uart3_rts_sd", NULL, NULL, NULL,
+ "gpio_164", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(UART3_RX_IRRX, 165,
+ "uart3_rx_irrx", NULL, NULL, NULL,
+ "gpio_165", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(UART3_TX_IRTX, 166,
+ "uart3_tx_irtx", NULL, NULL, NULL,
+ "gpio_166", NULL, NULL, "safe_mode"),
+ { .reg_offset = OMAP_MUX_TERMINATOR },
+};
+
+/*
+ * Signals different on CBC package compared to the superset
+ */
+#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_OMAP_PACKAGE_CBC)
+struct omap_mux __initdata omap3_cbc_subset[] = {
+ { .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define omap3_cbc_subset NULL
+#endif
+
+/*
+ * Balls for CBC package
+ * 515-pin s-PBGA Package, 0.65mm Ball Pitch (Top), 0.50mm Ball Pitch (Bottom)
+ *
+ * FIXME: What's up with the outdated TI documentation? See:
+ *
+ * http://wiki.davincidsp.com/index.php/Datasheet_Errata_for_OMAP35x_CBC_Package
+ * http://community.ti.com/forums/t/10982.aspx
+ */
+#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_DEBUG_FS) \
+ && defined(CONFIG_OMAP_PACKAGE_CBC)
+struct omap_ball __initdata omap3_cbc_ball[] = {
+ _OMAP3_BALLENTRY(CAM_D0, "ae16", NULL),
+ _OMAP3_BALLENTRY(CAM_D1, "ae15", NULL),
+ _OMAP3_BALLENTRY(CAM_D10, "d25", NULL),
+ _OMAP3_BALLENTRY(CAM_D11, "e26", NULL),
+ _OMAP3_BALLENTRY(CAM_D2, "a24", NULL),
+ _OMAP3_BALLENTRY(CAM_D3, "b24", NULL),
+ _OMAP3_BALLENTRY(CAM_D4, "d24", NULL),
+ _OMAP3_BALLENTRY(CAM_D5, "c24", NULL),
+ _OMAP3_BALLENTRY(CAM_D6, "p25", NULL),
+ _OMAP3_BALLENTRY(CAM_D7, "p26", NULL),
+ _OMAP3_BALLENTRY(CAM_D8, "n25", NULL),
+ _OMAP3_BALLENTRY(CAM_D9, "n26", NULL),
+ _OMAP3_BALLENTRY(CAM_FLD, "b23", NULL),
+ _OMAP3_BALLENTRY(CAM_HS, "c23", NULL),
+ _OMAP3_BALLENTRY(CAM_PCLK, "c26", NULL),
+ _OMAP3_BALLENTRY(CAM_STROBE, "d26", NULL),
+ _OMAP3_BALLENTRY(CAM_VS, "d23", NULL),
+ _OMAP3_BALLENTRY(CAM_WEN, "a23", NULL),
+ _OMAP3_BALLENTRY(CAM_XCLKA, "c25", NULL),
+ _OMAP3_BALLENTRY(CAM_XCLKB, "e25", NULL),
+ _OMAP3_BALLENTRY(CSI2_DX0, "ad17", NULL),
+ _OMAP3_BALLENTRY(CSI2_DX1, "ae18", NULL),
+ _OMAP3_BALLENTRY(CSI2_DY0, "ad16", NULL),
+ _OMAP3_BALLENTRY(CSI2_DY1, "ae17", NULL),
+ _OMAP3_BALLENTRY(DSS_ACBIAS, "f26", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA0, "ae21", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA1, "ae22", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA10, "ac26", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA11, "ad26", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA12, "aa25", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA13, "y25", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA14, "aa26", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA15, "ab26", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA16, "l25", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA17, "l26", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA18, "m24", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA19, "m26", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA2, "ae23", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA20, "f25", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA21, "n24", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA22, "ac25", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA23, "ab25", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA3, "ae24", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA4, "ad23", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA5, "ad24", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA6, "g26", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA7, "h25", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA8, "h26", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA9, "j26", NULL),
+ _OMAP3_BALLENTRY(DSS_HSYNC, "k24", NULL),
+ _OMAP3_BALLENTRY(DSS_PCLK, "g25", NULL),
+ _OMAP3_BALLENTRY(DSS_VSYNC, "m25", NULL),
+ _OMAP3_BALLENTRY(ETK_CLK, "ab2", NULL),
+ _OMAP3_BALLENTRY(ETK_CTL, "ab3", NULL),
+ _OMAP3_BALLENTRY(ETK_D0, "ac3", NULL),
+ _OMAP3_BALLENTRY(ETK_D1, "ad4", NULL),
+ _OMAP3_BALLENTRY(ETK_D10, "ae4", NULL),
+ _OMAP3_BALLENTRY(ETK_D11, "af6", NULL),
+ _OMAP3_BALLENTRY(ETK_D12, "ae6", NULL),
+ _OMAP3_BALLENTRY(ETK_D13, "af7", NULL),
+ _OMAP3_BALLENTRY(ETK_D14, "af9", NULL),
+ _OMAP3_BALLENTRY(ETK_D15, "ae9", NULL),
+ _OMAP3_BALLENTRY(ETK_D2, "ad3", NULL),
+ _OMAP3_BALLENTRY(ETK_D3, "aa3", NULL),
+ _OMAP3_BALLENTRY(ETK_D4, "y3", NULL),
+ _OMAP3_BALLENTRY(ETK_D5, "ab1", NULL),
+ _OMAP3_BALLENTRY(ETK_D6, "ae3", NULL),
+ _OMAP3_BALLENTRY(ETK_D7, "ad2", NULL),
+ _OMAP3_BALLENTRY(ETK_D8, "aa4", NULL),
+ _OMAP3_BALLENTRY(ETK_D9, "v2", NULL),
+ _OMAP3_BALLENTRY(GPMC_A1, "j2", NULL),
+ _OMAP3_BALLENTRY(GPMC_A10, "d2", NULL),
+ _OMAP3_BALLENTRY(GPMC_A2, "h1", NULL),
+ _OMAP3_BALLENTRY(GPMC_A3, "h2", NULL),
+ _OMAP3_BALLENTRY(GPMC_A4, "g2", NULL),
+ _OMAP3_BALLENTRY(GPMC_A5, "f1", NULL),
+ _OMAP3_BALLENTRY(GPMC_A6, "f2", NULL),
+ _OMAP3_BALLENTRY(GPMC_A7, "e1", NULL),
+ _OMAP3_BALLENTRY(GPMC_A8, "e2", NULL),
+ _OMAP3_BALLENTRY(GPMC_A9, "d1", NULL),
+ _OMAP3_BALLENTRY(GPMC_CLK, "n1", "l1"),
+ _OMAP3_BALLENTRY(GPMC_D10, "t1", "n1"),
+ _OMAP3_BALLENTRY(GPMC_D11, "u2", "p2"),
+ _OMAP3_BALLENTRY(GPMC_D12, "u1", "p1"),
+ _OMAP3_BALLENTRY(GPMC_D13, "p1", "m1"),
+ _OMAP3_BALLENTRY(GPMC_D14, "l2", "j2"),
+ _OMAP3_BALLENTRY(GPMC_D15, "m2", "k2"),
+ _OMAP3_BALLENTRY(GPMC_D8, "v1", "r1"),
+ _OMAP3_BALLENTRY(GPMC_D9, "y1", "t1"),
+ _OMAP3_BALLENTRY(GPMC_NBE0_CLE, "k2", NULL),
+ _OMAP3_BALLENTRY(GPMC_NBE1, "j1", NULL),
+ _OMAP3_BALLENTRY(GPMC_NCS1, "ad1", "w1"),
+ _OMAP3_BALLENTRY(GPMC_NCS2, "a3", NULL),
+ _OMAP3_BALLENTRY(GPMC_NCS3, "b6", NULL),
+ _OMAP3_BALLENTRY(GPMC_NCS4, "b4", NULL),
+ _OMAP3_BALLENTRY(GPMC_NCS5, "c4", NULL),
+ _OMAP3_BALLENTRY(GPMC_NCS6, "b5", NULL),
+ _OMAP3_BALLENTRY(GPMC_NCS7, "c5", NULL),
+ _OMAP3_BALLENTRY(GPMC_NWP, "ac6", "y5"),
+ _OMAP3_BALLENTRY(GPMC_WAIT1, "ac8", "y8"),
+ _OMAP3_BALLENTRY(GPMC_WAIT2, "b3", NULL),
+ _OMAP3_BALLENTRY(GPMC_WAIT3, "c6", NULL),
+ _OMAP3_BALLENTRY(HDQ_SIO, "j23", NULL),
+ _OMAP3_BALLENTRY(HSUSB0_CLK, "w19", NULL),
+ _OMAP3_BALLENTRY(HSUSB0_DATA0, "v20", NULL),
+ _OMAP3_BALLENTRY(HSUSB0_DATA1, "y20", NULL),
+ _OMAP3_BALLENTRY(HSUSB0_DATA2, "v18", NULL),
+ _OMAP3_BALLENTRY(HSUSB0_DATA3, "w20", NULL),
+ _OMAP3_BALLENTRY(HSUSB0_DATA4, "w17", NULL),
+ _OMAP3_BALLENTRY(HSUSB0_DATA5, "y18", NULL),
+ _OMAP3_BALLENTRY(HSUSB0_DATA6, "y19", NULL),
+ _OMAP3_BALLENTRY(HSUSB0_DATA7, "y17", NULL),
+ _OMAP3_BALLENTRY(HSUSB0_DIR, "v19", NULL),
+ _OMAP3_BALLENTRY(HSUSB0_NXT, "w18", NULL),
+ _OMAP3_BALLENTRY(HSUSB0_STP, "u20", NULL),
+ _OMAP3_BALLENTRY(I2C2_SCL, "c2", NULL),
+ _OMAP3_BALLENTRY(I2C2_SDA, "c1", NULL),
+ _OMAP3_BALLENTRY(I2C3_SCL, "ab4", NULL),
+ _OMAP3_BALLENTRY(I2C3_SDA, "ac4", NULL),
+ _OMAP3_BALLENTRY(I2C4_SCL, "ad15", NULL),
+ _OMAP3_BALLENTRY(I2C4_SDA, "w16", NULL),
+ _OMAP3_BALLENTRY(JTAG_EMU0, "y15", NULL),
+ _OMAP3_BALLENTRY(JTAG_EMU1, "y14", NULL),
+ _OMAP3_BALLENTRY(MCBSP1_CLKR, "u19", NULL),
+ _OMAP3_BALLENTRY(MCBSP1_CLKX, "t17", NULL),
+ _OMAP3_BALLENTRY(MCBSP1_DR, "t20", NULL),
+ _OMAP3_BALLENTRY(MCBSP1_DX, "u17", NULL),
+ _OMAP3_BALLENTRY(MCBSP1_FSR, "v17", NULL),
+ _OMAP3_BALLENTRY(MCBSP1_FSX, "p20", NULL),
+ _OMAP3_BALLENTRY(MCBSP2_CLKX, "r18", NULL),
+ _OMAP3_BALLENTRY(MCBSP2_DR, "t18", NULL),
+ _OMAP3_BALLENTRY(MCBSP2_DX, "r19", NULL),
+ _OMAP3_BALLENTRY(MCBSP2_FSX, "u18", NULL),
+ _OMAP3_BALLENTRY(MCBSP3_CLKX, "u3", NULL),
+ _OMAP3_BALLENTRY(MCBSP3_DR, "n3", NULL),
+ _OMAP3_BALLENTRY(MCBSP3_DX, "p3", NULL),
+ _OMAP3_BALLENTRY(MCBSP3_FSX, "w3", NULL),
+ _OMAP3_BALLENTRY(MCBSP4_CLKX, "v3", NULL),
+ _OMAP3_BALLENTRY(MCBSP4_DR, "u4", NULL),
+ _OMAP3_BALLENTRY(MCBSP4_DX, "r3", NULL),
+ _OMAP3_BALLENTRY(MCBSP4_FSX, "t3", NULL),
+ _OMAP3_BALLENTRY(MCBSP_CLKS, "t19", NULL),
+ _OMAP3_BALLENTRY(MCSPI1_CLK, "p9", NULL),
+ _OMAP3_BALLENTRY(MCSPI1_CS0, "r7", NULL),
+ _OMAP3_BALLENTRY(MCSPI1_CS1, "r8", NULL),
+ _OMAP3_BALLENTRY(MCSPI1_CS2, "r9", NULL),
+ _OMAP3_BALLENTRY(MCSPI1_CS3, "t8", NULL),
+ _OMAP3_BALLENTRY(MCSPI1_SIMO, "p8", NULL),
+ _OMAP3_BALLENTRY(MCSPI1_SOMI, "p7", NULL),
+ _OMAP3_BALLENTRY(MCSPI2_CLK, "w7", NULL),
+ _OMAP3_BALLENTRY(MCSPI2_CS0, "v8", NULL),
+ _OMAP3_BALLENTRY(MCSPI2_CS1, "v9", NULL),
+ _OMAP3_BALLENTRY(MCSPI2_SIMO, "w8", NULL),
+ _OMAP3_BALLENTRY(MCSPI2_SOMI, "u8", NULL),
+ _OMAP3_BALLENTRY(SDMMC1_CLK, "n19", NULL),
+ _OMAP3_BALLENTRY(SDMMC1_CMD, "l18", NULL),
+ _OMAP3_BALLENTRY(SDMMC1_DAT0, "m19", NULL),
+ _OMAP3_BALLENTRY(SDMMC1_DAT1, "m18", NULL),
+ _OMAP3_BALLENTRY(SDMMC1_DAT2, "k18", NULL),
+ _OMAP3_BALLENTRY(SDMMC1_DAT3, "n20", NULL),
+ _OMAP3_BALLENTRY(SDMMC1_DAT4, "m20", NULL),
+ _OMAP3_BALLENTRY(SDMMC1_DAT5, "p17", NULL),
+ _OMAP3_BALLENTRY(SDMMC1_DAT6, "p18", NULL),
+ _OMAP3_BALLENTRY(SDMMC1_DAT7, "p19", NULL),
+ _OMAP3_BALLENTRY(SDMMC2_CLK, "w10", NULL),
+ _OMAP3_BALLENTRY(SDMMC2_CMD, "r10", NULL),
+ _OMAP3_BALLENTRY(SDMMC2_DAT0, "t10", NULL),
+ _OMAP3_BALLENTRY(SDMMC2_DAT1, "t9", NULL),
+ _OMAP3_BALLENTRY(SDMMC2_DAT2, "u10", NULL),
+ _OMAP3_BALLENTRY(SDMMC2_DAT3, "u9", NULL),
+ _OMAP3_BALLENTRY(SDMMC2_DAT4, "v10", NULL),
+ _OMAP3_BALLENTRY(SDMMC2_DAT5, "m3", NULL),
+ _OMAP3_BALLENTRY(SDMMC2_DAT6, "l3", NULL),
+ _OMAP3_BALLENTRY(SDMMC2_DAT7, "k3", NULL),
+ _OMAP3_BALLENTRY(SYS_BOOT0, "f3", NULL),
+ _OMAP3_BALLENTRY(SYS_BOOT1, "d3", NULL),
+ _OMAP3_BALLENTRY(SYS_BOOT2, "c3", NULL),
+ _OMAP3_BALLENTRY(SYS_BOOT3, "e3", NULL),
+ _OMAP3_BALLENTRY(SYS_BOOT4, "e4", NULL),
+ _OMAP3_BALLENTRY(SYS_BOOT5, "g3", NULL),
+ _OMAP3_BALLENTRY(SYS_BOOT6, "d4", NULL),
+ _OMAP3_BALLENTRY(SYS_CLKOUT1, "ae14", NULL),
+ _OMAP3_BALLENTRY(SYS_CLKOUT2, "w11", NULL),
+ _OMAP3_BALLENTRY(SYS_CLKREQ, "w15", NULL),
+ _OMAP3_BALLENTRY(SYS_NIRQ, "v16", NULL),
+ _OMAP3_BALLENTRY(SYS_NRESWARM, "ad7", "aa5"),
+ _OMAP3_BALLENTRY(SYS_OFF_MODE, "v12", NULL),
+ _OMAP3_BALLENTRY(UART1_CTS, "w2", NULL),
+ _OMAP3_BALLENTRY(UART1_RTS, "r2", NULL),
+ _OMAP3_BALLENTRY(UART1_RX, "h3", NULL),
+ _OMAP3_BALLENTRY(UART1_TX, "l4", NULL),
+ _OMAP3_BALLENTRY(UART2_CTS, "y24", NULL),
+ _OMAP3_BALLENTRY(UART2_RTS, "aa24", NULL),
+ _OMAP3_BALLENTRY(UART2_RX, "ad21", NULL),
+ _OMAP3_BALLENTRY(UART2_TX, "ad22", NULL),
+ _OMAP3_BALLENTRY(UART3_CTS_RCTX, "f23", NULL),
+ _OMAP3_BALLENTRY(UART3_RTS_SD, "f24", NULL),
+ _OMAP3_BALLENTRY(UART3_RX_IRRX, "h24", NULL),
+ _OMAP3_BALLENTRY(UART3_TX_IRTX, "g24", NULL),
+ { .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define omap3_cbc_ball NULL
+#endif
+
+/*
+ * Signals different on CUS package compared to superset
+ */
+#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_OMAP_PACKAGE_CUS)
+struct omap_mux __initdata omap3_cus_subset[] = {
+ _OMAP3_MUXENTRY(CAM_D10, 109,
+ "cam_d10", NULL, NULL, NULL,
+ "gpio_109", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CAM_D11, 110,
+ "cam_d11", NULL, NULL, NULL,
+ "gpio_110", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CAM_D2, 101,
+ "cam_d2", NULL, NULL, NULL,
+ "gpio_101", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CAM_D3, 102,
+ "cam_d3", NULL, NULL, NULL,
+ "gpio_102", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CAM_D4, 103,
+ "cam_d4", NULL, NULL, NULL,
+ "gpio_103", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CAM_D5, 104,
+ "cam_d5", NULL, NULL, NULL,
+ "gpio_104", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CAM_FLD, 98,
+ "cam_fld", NULL, "cam_global_reset", NULL,
+ "gpio_98", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CAM_HS, 94,
+ "cam_hs", NULL, NULL, NULL,
+ "gpio_94", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CAM_PCLK, 97,
+ "cam_pclk", NULL, NULL, NULL,
+ "gpio_97", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CAM_STROBE, 126,
+ "cam_strobe", NULL, NULL, NULL,
+ "gpio_126", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CAM_VS, 95,
+ "cam_vs", NULL, NULL, NULL,
+ "gpio_95", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CAM_WEN, 167,
+ "cam_wen", NULL, "cam_shutter", NULL,
+ "gpio_167", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(DSS_DATA6, 76,
+ "dss_data6", NULL, "uart1_tx", NULL,
+ "gpio_76", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(DSS_DATA7, 77,
+ "dss_data7", NULL, "uart1_rx", NULL,
+ "gpio_77", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(DSS_DATA8, 78,
+ "dss_data8", NULL, NULL, NULL,
+ "gpio_78", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(DSS_DATA9, 79,
+ "dss_data9", NULL, NULL, NULL,
+ "gpio_79", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(DSS_HSYNC, 67,
+ "dss_hsync", NULL, NULL, NULL,
+ "gpio_67", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(DSS_PCLK, 66,
+ "dss_pclk", NULL, NULL, NULL,
+ "gpio_66", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(ETK_CLK, 12,
+ "etk_clk", "mcbsp5_clkx", "sdmmc3_clk", "hsusb1_stp",
+ "gpio_12", "mm1_rxdp", "hsusb1_tll_stp", NULL),
+ _OMAP3_MUXENTRY(ETK_CTL, 13,
+ "etk_ctl", NULL, "sdmmc3_cmd", "hsusb1_clk",
+ "gpio_13", NULL, "hsusb1_tll_clk", NULL),
+ _OMAP3_MUXENTRY(ETK_D0, 14,
+ "etk_d0", "mcspi3_simo", "sdmmc3_dat4", "hsusb1_data0",
+ "gpio_14", "mm1_rxrcv", "hsusb1_tll_data0", NULL),
+ _OMAP3_MUXENTRY(ETK_D1, 15,
+ "etk_d1", "mcspi3_somi", NULL, "hsusb1_data1",
+ "gpio_15", "mm1_txse0", "hsusb1_tll_data1", NULL),
+ _OMAP3_MUXENTRY(ETK_D10, 24,
+ "etk_d10", NULL, "uart1_rx", "hsusb2_clk",
+ "gpio_24", NULL, "hsusb2_tll_clk", NULL),
+ _OMAP3_MUXENTRY(ETK_D11, 25,
+ "etk_d11", NULL, NULL, "hsusb2_stp",
+ "gpio_25", "mm2_rxdp", "hsusb2_tll_stp", NULL),
+ _OMAP3_MUXENTRY(ETK_D12, 26,
+ "etk_d12", NULL, NULL, "hsusb2_dir",
+ "gpio_26", NULL, "hsusb2_tll_dir", NULL),
+ _OMAP3_MUXENTRY(ETK_D13, 27,
+ "etk_d13", NULL, NULL, "hsusb2_nxt",
+ "gpio_27", "mm2_rxdm", "hsusb2_tll_nxt", NULL),
+ _OMAP3_MUXENTRY(ETK_D14, 28,
+ "etk_d14", NULL, NULL, "hsusb2_data0",
+ "gpio_28", "mm2_rxrcv", "hsusb2_tll_data0", NULL),
+ _OMAP3_MUXENTRY(ETK_D15, 29,
+ "etk_d15", NULL, NULL, "hsusb2_data1",
+ "gpio_29", "mm2_txse0", "hsusb2_tll_data1", NULL),
+ _OMAP3_MUXENTRY(ETK_D2, 16,
+ "etk_d2", "mcspi3_cs0", NULL, "hsusb1_data2",
+ "gpio_16", "mm1_txdat", "hsusb1_tll_data2", NULL),
+ _OMAP3_MUXENTRY(ETK_D3, 17,
+ "etk_d3", "mcspi3_clk", "sdmmc3_dat3", "hsusb1_data7",
+ "gpio_17", NULL, "hsusb1_tll_data7", NULL),
+ _OMAP3_MUXENTRY(ETK_D4, 18,
+ "etk_d4", "mcbsp5_dr", "sdmmc3_dat0", "hsusb1_data4",
+ "gpio_18", NULL, "hsusb1_tll_data4", NULL),
+ _OMAP3_MUXENTRY(ETK_D5, 19,
+ "etk_d5", "mcbsp5_fsx", "sdmmc3_dat1", "hsusb1_data5",
+ "gpio_19", NULL, "hsusb1_tll_data5", NULL),
+ _OMAP3_MUXENTRY(ETK_D6, 20,
+ "etk_d6", "mcbsp5_dx", "sdmmc3_dat2", "hsusb1_data6",
+ "gpio_20", NULL, "hsusb1_tll_data6", NULL),
+ _OMAP3_MUXENTRY(ETK_D7, 21,
+ "etk_d7", "mcspi3_cs1", "sdmmc3_dat7", "hsusb1_data3",
+ "gpio_21", "mm1_txen_n", "hsusb1_tll_data3", NULL),
+ _OMAP3_MUXENTRY(ETK_D8, 22,
+ "etk_d8", "sys_drm_msecure", "sdmmc3_dat6", "hsusb1_dir",
+ "gpio_22", NULL, "hsusb1_tll_dir", NULL),
+ _OMAP3_MUXENTRY(ETK_D9, 23,
+ "etk_d9", "sys_secure_indicator", "sdmmc3_dat5", "hsusb1_nxt",
+ "gpio_23", "mm1_rxdm", "hsusb1_tll_nxt", NULL),
+ _OMAP3_MUXENTRY(MCBSP3_CLKX, 142,
+ "mcbsp3_clkx", "uart2_tx", NULL, NULL,
+ "gpio_142", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(MCBSP3_DR, 141,
+ "mcbsp3_dr", "uart2_rts", NULL, NULL,
+ "gpio_141", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(MCBSP3_DX, 140,
+ "mcbsp3_dx", "uart2_cts", NULL, NULL,
+ "gpio_140", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(MCBSP3_FSX, 143,
+ "mcbsp3_fsx", "uart2_rx", NULL, NULL,
+ "gpio_143", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(SDMMC2_DAT5, 137,
+ "sdmmc2_dat5", "sdmmc2_dir_dat1",
+ "cam_global_reset", "sdmmc3_dat1",
+ "gpio_137", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(SDMMC2_DAT6, 138,
+ "sdmmc2_dat6", "sdmmc2_dir_cmd", "cam_shutter", "sdmmc3_dat2",
+ "gpio_138", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(SDMMC2_DAT7, 139,
+ "sdmmc2_dat7", "sdmmc2_clkin", NULL, "sdmmc3_dat3",
+ "gpio_139", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(UART1_CTS, 150,
+ "uart1_cts", NULL, NULL, NULL,
+ "gpio_150", NULL, NULL, "safe_mode"),
+ { .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define omap3_cus_subset NULL
+#endif
+
+/*
+ * Balls for CUS package
+ * 423-pin s-PBGA Package, 0.65mm Ball Pitch (Bottom)
+ */
+#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_DEBUG_FS) \
+ && defined(CONFIG_OMAP_PACKAGE_CUS)
+struct omap_ball __initdata omap3_cus_ball[] = {
+ _OMAP3_BALLENTRY(CAM_D0, "ab18", NULL),
+ _OMAP3_BALLENTRY(CAM_D1, "ac18", NULL),
+ _OMAP3_BALLENTRY(CAM_D10, "f21", NULL),
+ _OMAP3_BALLENTRY(CAM_D11, "g21", NULL),
+ _OMAP3_BALLENTRY(CAM_D2, "g19", NULL),
+ _OMAP3_BALLENTRY(CAM_D3, "f19", NULL),
+ _OMAP3_BALLENTRY(CAM_D4, "g20", NULL),
+ _OMAP3_BALLENTRY(CAM_D5, "b21", NULL),
+ _OMAP3_BALLENTRY(CAM_D6, "l24", NULL),
+ _OMAP3_BALLENTRY(CAM_D7, "k24", NULL),
+ _OMAP3_BALLENTRY(CAM_D8, "j23", NULL),
+ _OMAP3_BALLENTRY(CAM_D9, "k23", NULL),
+ _OMAP3_BALLENTRY(CAM_FLD, "h24", NULL),
+ _OMAP3_BALLENTRY(CAM_HS, "a22", NULL),
+ _OMAP3_BALLENTRY(CAM_PCLK, "j19", NULL),
+ _OMAP3_BALLENTRY(CAM_STROBE, "j20", NULL),
+ _OMAP3_BALLENTRY(CAM_VS, "e18", NULL),
+ _OMAP3_BALLENTRY(CAM_WEN, "f18", NULL),
+ _OMAP3_BALLENTRY(CAM_XCLKA, "b22", NULL),
+ _OMAP3_BALLENTRY(CAM_XCLKB, "c22", NULL),
+ _OMAP3_BALLENTRY(DSS_ACBIAS, "j21", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA0, "ac19", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA1, "ab19", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA10, "ac22", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA11, "ac23", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA12, "ab22", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA13, "y22", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA14, "w22", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA15, "v22", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA16, "j22", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA17, "g23", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA18, "g24", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA19, "h23", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA2, "ad20", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA20, "d23", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA21, "k22", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA22, "v21", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA23, "w21", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA3, "ac20", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA4, "ad21", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA5, "ac21", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA6, "d24", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA7, "e23", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA8, "e24", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA9, "f23", NULL),
+ _OMAP3_BALLENTRY(DSS_HSYNC, "e22", NULL),
+ _OMAP3_BALLENTRY(DSS_PCLK, "g22", NULL),
+ _OMAP3_BALLENTRY(DSS_VSYNC, "f22", NULL),
+ _OMAP3_BALLENTRY(ETK_CLK, "ac1", NULL),
+ _OMAP3_BALLENTRY(ETK_CTL, "ad3", NULL),
+ _OMAP3_BALLENTRY(ETK_D0, "ad6", NULL),
+ _OMAP3_BALLENTRY(ETK_D1, "ac6", NULL),
+ _OMAP3_BALLENTRY(ETK_D10, "ac3", NULL),
+ _OMAP3_BALLENTRY(ETK_D11, "ac9", NULL),
+ _OMAP3_BALLENTRY(ETK_D12, "ac10", NULL),
+ _OMAP3_BALLENTRY(ETK_D13, "ad11", NULL),
+ _OMAP3_BALLENTRY(ETK_D14, "ac11", NULL),
+ _OMAP3_BALLENTRY(ETK_D15, "ad12", NULL),
+ _OMAP3_BALLENTRY(ETK_D2, "ac7", NULL),
+ _OMAP3_BALLENTRY(ETK_D3, "ad8", NULL),
+ _OMAP3_BALLENTRY(ETK_D4, "ac5", NULL),
+ _OMAP3_BALLENTRY(ETK_D5, "ad2", NULL),
+ _OMAP3_BALLENTRY(ETK_D6, "ac8", NULL),
+ _OMAP3_BALLENTRY(ETK_D7, "ad9", NULL),
+ _OMAP3_BALLENTRY(ETK_D8, "ac4", NULL),
+ _OMAP3_BALLENTRY(ETK_D9, "ad5", NULL),
+ _OMAP3_BALLENTRY(GPMC_A1, "k4", NULL),
+ _OMAP3_BALLENTRY(GPMC_A10, "g2", NULL),
+ _OMAP3_BALLENTRY(GPMC_A2, "k3", NULL),
+ _OMAP3_BALLENTRY(GPMC_A3, "k2", NULL),
+ _OMAP3_BALLENTRY(GPMC_A4, "j4", NULL),
+ _OMAP3_BALLENTRY(GPMC_A5, "j3", NULL),
+ _OMAP3_BALLENTRY(GPMC_A6, "j2", NULL),
+ _OMAP3_BALLENTRY(GPMC_A7, "j1", NULL),
+ _OMAP3_BALLENTRY(GPMC_A8, "h1", NULL),
+ _OMAP3_BALLENTRY(GPMC_A9, "h2", NULL),
+ _OMAP3_BALLENTRY(GPMC_CLK, "w2", NULL),
+ _OMAP3_BALLENTRY(GPMC_D10, "u1", NULL),
+ _OMAP3_BALLENTRY(GPMC_D11, "r3", NULL),
+ _OMAP3_BALLENTRY(GPMC_D12, "t3", NULL),
+ _OMAP3_BALLENTRY(GPMC_D13, "u2", NULL),
+ _OMAP3_BALLENTRY(GPMC_D14, "v1", NULL),
+ _OMAP3_BALLENTRY(GPMC_D15, "v2", NULL),
+ _OMAP3_BALLENTRY(GPMC_D8, "r2", NULL),
+ _OMAP3_BALLENTRY(GPMC_D9, "t2", NULL),
+ _OMAP3_BALLENTRY(GPMC_NBE0_CLE, "k5", NULL),
+ _OMAP3_BALLENTRY(GPMC_NBE1, "l1", NULL),
+ _OMAP3_BALLENTRY(GPMC_NCS3, "d2", NULL),
+ _OMAP3_BALLENTRY(GPMC_NCS4, "f4", NULL),
+ _OMAP3_BALLENTRY(GPMC_NCS5, "g5", NULL),
+ _OMAP3_BALLENTRY(GPMC_NCS6, "f3", NULL),
+ _OMAP3_BALLENTRY(GPMC_NCS7, "g4", NULL),
+ _OMAP3_BALLENTRY(GPMC_NWP, "e1", NULL),
+ _OMAP3_BALLENTRY(GPMC_WAIT3, "c2", NULL),
+ _OMAP3_BALLENTRY(HDQ_SIO, "a24", NULL),
+ _OMAP3_BALLENTRY(HSUSB0_CLK, "r21", NULL),
+ _OMAP3_BALLENTRY(HSUSB0_DATA0, "t24", NULL),
+ _OMAP3_BALLENTRY(HSUSB0_DATA1, "t23", NULL),
+ _OMAP3_BALLENTRY(HSUSB0_DATA2, "u24", NULL),
+ _OMAP3_BALLENTRY(HSUSB0_DATA3, "u23", NULL),
+ _OMAP3_BALLENTRY(HSUSB0_DATA4, "w24", NULL),
+ _OMAP3_BALLENTRY(HSUSB0_DATA5, "v23", NULL),
+ _OMAP3_BALLENTRY(HSUSB0_DATA6, "w23", NULL),
+ _OMAP3_BALLENTRY(HSUSB0_DATA7, "t22", NULL),
+ _OMAP3_BALLENTRY(HSUSB0_DIR, "p23", NULL),
+ _OMAP3_BALLENTRY(HSUSB0_NXT, "r22", NULL),
+ _OMAP3_BALLENTRY(HSUSB0_STP, "r23", NULL),
+ _OMAP3_BALLENTRY(I2C2_SCL, "ac15", NULL),
+ _OMAP3_BALLENTRY(I2C2_SDA, "ac14", NULL),
+ _OMAP3_BALLENTRY(I2C3_SCL, "ac13", NULL),
+ _OMAP3_BALLENTRY(I2C3_SDA, "ac12", NULL),
+ _OMAP3_BALLENTRY(I2C4_SCL, "y16", NULL),
+ _OMAP3_BALLENTRY(I2C4_SDA, "y15", NULL),
+ _OMAP3_BALLENTRY(JTAG_EMU0, "ac24", NULL),
+ _OMAP3_BALLENTRY(JTAG_EMU1, "ad24", NULL),
+ _OMAP3_BALLENTRY(MCBSP1_CLKR, "w19", NULL),
+ _OMAP3_BALLENTRY(MCBSP1_CLKX, "v18", NULL),
+ _OMAP3_BALLENTRY(MCBSP1_DR, "y18", NULL),
+ _OMAP3_BALLENTRY(MCBSP1_DX, "w18", NULL),
+ _OMAP3_BALLENTRY(MCBSP1_FSR, "ab20", NULL),
+ _OMAP3_BALLENTRY(MCBSP1_FSX, "aa19", NULL),
+ _OMAP3_BALLENTRY(MCBSP2_CLKX, "t21", NULL),
+ _OMAP3_BALLENTRY(MCBSP2_DR, "v19", NULL),
+ _OMAP3_BALLENTRY(MCBSP2_DX, "r20", NULL),
+ _OMAP3_BALLENTRY(MCBSP2_FSX, "v20", NULL),
+ _OMAP3_BALLENTRY(MCBSP3_CLKX, "w4", NULL),
+ _OMAP3_BALLENTRY(MCBSP3_DR, "v5", NULL),
+ _OMAP3_BALLENTRY(MCBSP3_DX, "v6", NULL),
+ _OMAP3_BALLENTRY(MCBSP3_FSX, "v4", NULL),
+ _OMAP3_BALLENTRY(MCBSP_CLKS, "aa18", NULL),
+ _OMAP3_BALLENTRY(MCSPI1_CLK, "t5", NULL),
+ _OMAP3_BALLENTRY(MCSPI1_CS0, "t6", NULL),
+ _OMAP3_BALLENTRY(MCSPI1_CS3, "r5", NULL),
+ _OMAP3_BALLENTRY(MCSPI1_SIMO, "r4", NULL),
+ _OMAP3_BALLENTRY(MCSPI1_SOMI, "t4", NULL),
+ _OMAP3_BALLENTRY(MCSPI2_CLK, "n5", NULL),
+ _OMAP3_BALLENTRY(MCSPI2_CS0, "m5", NULL),
+ _OMAP3_BALLENTRY(MCSPI2_CS1, "m4", NULL),
+ _OMAP3_BALLENTRY(MCSPI2_SIMO, "n4", NULL),
+ _OMAP3_BALLENTRY(MCSPI2_SOMI, "n3", NULL),
+ _OMAP3_BALLENTRY(SDMMC1_CLK, "m23", NULL),
+ _OMAP3_BALLENTRY(SDMMC1_CMD, "l23", NULL),
+ _OMAP3_BALLENTRY(SDMMC1_DAT0, "m22", NULL),
+ _OMAP3_BALLENTRY(SDMMC1_DAT1, "m21", NULL),
+ _OMAP3_BALLENTRY(SDMMC1_DAT2, "m20", NULL),
+ _OMAP3_BALLENTRY(SDMMC1_DAT3, "n23", NULL),
+ _OMAP3_BALLENTRY(SDMMC1_DAT4, "n22", NULL),
+ _OMAP3_BALLENTRY(SDMMC1_DAT5, "n21", NULL),
+ _OMAP3_BALLENTRY(SDMMC1_DAT6, "n20", NULL),
+ _OMAP3_BALLENTRY(SDMMC1_DAT7, "p24", NULL),
+ _OMAP3_BALLENTRY(SDMMC2_CLK, "y1", NULL),
+ _OMAP3_BALLENTRY(SDMMC2_CMD, "ab5", NULL),
+ _OMAP3_BALLENTRY(SDMMC2_DAT0, "ab3", NULL),
+ _OMAP3_BALLENTRY(SDMMC2_DAT1, "y3", NULL),
+ _OMAP3_BALLENTRY(SDMMC2_DAT2, "w3", NULL),
+ _OMAP3_BALLENTRY(SDMMC2_DAT3, "v3", NULL),
+ _OMAP3_BALLENTRY(SDMMC2_DAT4, "ab2", NULL),
+ _OMAP3_BALLENTRY(SDMMC2_DAT5, "aa2", NULL),
+ _OMAP3_BALLENTRY(SDMMC2_DAT6, "y2", NULL),
+ _OMAP3_BALLENTRY(SDMMC2_DAT7, "aa1", NULL),
+ _OMAP3_BALLENTRY(SYS_BOOT0, "ab12", NULL),
+ _OMAP3_BALLENTRY(SYS_BOOT1, "ac16", NULL),
+ _OMAP3_BALLENTRY(SYS_BOOT2, "ad17", NULL),
+ _OMAP3_BALLENTRY(SYS_BOOT3, "ad18", NULL),
+ _OMAP3_BALLENTRY(SYS_BOOT4, "ac17", NULL),
+ _OMAP3_BALLENTRY(SYS_BOOT5, "ab16", NULL),
+ _OMAP3_BALLENTRY(SYS_BOOT6, "aa15", NULL),
+ _OMAP3_BALLENTRY(SYS_CLKOUT1, "y7", NULL),
+ _OMAP3_BALLENTRY(SYS_CLKOUT2, "aa6", NULL),
+ _OMAP3_BALLENTRY(SYS_CLKREQ, "y13", NULL),
+ _OMAP3_BALLENTRY(SYS_NIRQ, "w16", NULL),
+ _OMAP3_BALLENTRY(SYS_NRESWARM, "y10", NULL),
+ _OMAP3_BALLENTRY(SYS_OFF_MODE, "ad23", NULL),
+ _OMAP3_BALLENTRY(UART1_CTS, "ac2", NULL),
+ _OMAP3_BALLENTRY(UART1_RTS, "w6", NULL),
+ _OMAP3_BALLENTRY(UART1_RX, "v7", NULL),
+ _OMAP3_BALLENTRY(UART1_TX, "w7", NULL),
+ _OMAP3_BALLENTRY(UART3_CTS_RCTX, "a23", NULL),
+ _OMAP3_BALLENTRY(UART3_RTS_SD, "b23", NULL),
+ _OMAP3_BALLENTRY(UART3_RX_IRRX, "b24", NULL),
+ _OMAP3_BALLENTRY(UART3_TX_IRTX, "c23", NULL),
+ { .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define omap3_cus_ball NULL
+#endif
+
+/*
+ * Signals different on CBB package comapared to superset
+ */
+#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_OMAP_PACKAGE_CBB)
+struct omap_mux __initdata omap3_cbb_subset[] = {
+ _OMAP3_MUXENTRY(CAM_D10, 109,
+ "cam_d10", NULL, NULL, NULL,
+ "gpio_109", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CAM_D11, 110,
+ "cam_d11", NULL, NULL, NULL,
+ "gpio_110", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CAM_D2, 101,
+ "cam_d2", NULL, NULL, NULL,
+ "gpio_101", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CAM_D3, 102,
+ "cam_d3", NULL, NULL, NULL,
+ "gpio_102", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CAM_D4, 103,
+ "cam_d4", NULL, NULL, NULL,
+ "gpio_103", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CAM_D5, 104,
+ "cam_d5", NULL, NULL, NULL,
+ "gpio_104", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CAM_FLD, 98,
+ "cam_fld", NULL, "cam_global_reset", NULL,
+ "gpio_98", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CAM_HS, 94,
+ "cam_hs", NULL, NULL, NULL,
+ "gpio_94", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CAM_PCLK, 97,
+ "cam_pclk", NULL, NULL, NULL,
+ "gpio_97", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CAM_STROBE, 126,
+ "cam_strobe", NULL, NULL, NULL,
+ "gpio_126", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CAM_VS, 95,
+ "cam_vs", NULL, NULL, NULL,
+ "gpio_95", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CAM_WEN, 167,
+ "cam_wen", NULL, "cam_shutter", NULL,
+ "gpio_167", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(DSS_DATA6, 76,
+ "dss_data6", NULL, "uart1_tx", NULL,
+ "gpio_76", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(DSS_DATA7, 77,
+ "dss_data7", NULL, "uart1_rx", NULL,
+ "gpio_77", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(DSS_DATA8, 78,
+ "dss_data8", NULL, NULL, NULL,
+ "gpio_78", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(DSS_DATA9, 79,
+ "dss_data9", NULL, NULL, NULL,
+ "gpio_79", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(DSS_HSYNC, 67,
+ "dss_hsync", NULL, NULL, NULL,
+ "gpio_67", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(DSS_PCLK, 66,
+ "dss_pclk", NULL, NULL, NULL,
+ "gpio_66", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(ETK_CLK, 12,
+ "etk_clk", "mcbsp5_clkx", "sdmmc3_clk", "hsusb1_stp",
+ "gpio_12", "mm1_rxdp", "hsusb1_tll_stp", NULL),
+ _OMAP3_MUXENTRY(ETK_CTL, 13,
+ "etk_ctl", NULL, "sdmmc3_cmd", "hsusb1_clk",
+ "gpio_13", NULL, "hsusb1_tll_clk", NULL),
+ _OMAP3_MUXENTRY(ETK_D0, 14,
+ "etk_d0", "mcspi3_simo", "sdmmc3_dat4", "hsusb1_data0",
+ "gpio_14", "mm1_rxrcv", "hsusb1_tll_data0", NULL),
+ _OMAP3_MUXENTRY(ETK_D1, 15,
+ "etk_d1", "mcspi3_somi", NULL, "hsusb1_data1",
+ "gpio_15", "mm1_txse0", "hsusb1_tll_data1", NULL),
+ _OMAP3_MUXENTRY(ETK_D10, 24,
+ "etk_d10", NULL, "uart1_rx", "hsusb2_clk",
+ "gpio_24", NULL, "hsusb2_tll_clk", NULL),
+ _OMAP3_MUXENTRY(ETK_D11, 25,
+ "etk_d11", NULL, NULL, "hsusb2_stp",
+ "gpio_25", "mm2_rxdp", "hsusb2_tll_stp", NULL),
+ _OMAP3_MUXENTRY(ETK_D12, 26,
+ "etk_d12", NULL, NULL, "hsusb2_dir",
+ "gpio_26", NULL, "hsusb2_tll_dir", NULL),
+ _OMAP3_MUXENTRY(ETK_D13, 27,
+ "etk_d13", NULL, NULL, "hsusb2_nxt",
+ "gpio_27", "mm2_rxdm", "hsusb2_tll_nxt", NULL),
+ _OMAP3_MUXENTRY(ETK_D14, 28,
+ "etk_d14", NULL, NULL, "hsusb2_data0",
+ "gpio_28", "mm2_rxrcv", "hsusb2_tll_data0", NULL),
+ _OMAP3_MUXENTRY(ETK_D15, 29,
+ "etk_d15", NULL, NULL, "hsusb2_data1",
+ "gpio_29", "mm2_txse0", "hsusb2_tll_data1", NULL),
+ _OMAP3_MUXENTRY(ETK_D2, 16,
+ "etk_d2", "mcspi3_cs0", NULL, "hsusb1_data2",
+ "gpio_16", "mm1_txdat", "hsusb1_tll_data2", NULL),
+ _OMAP3_MUXENTRY(ETK_D3, 17,
+ "etk_d3", "mcspi3_clk", "sdmmc3_dat3", "hsusb1_data7",
+ "gpio_17", NULL, "hsusb1_tll_data7", NULL),
+ _OMAP3_MUXENTRY(ETK_D4, 18,
+ "etk_d4", "mcbsp5_dr", "sdmmc3_dat0", "hsusb1_data4",
+ "gpio_18", NULL, "hsusb1_tll_data4", NULL),
+ _OMAP3_MUXENTRY(ETK_D5, 19,
+ "etk_d5", "mcbsp5_fsx", "sdmmc3_dat1", "hsusb1_data5",
+ "gpio_19", NULL, "hsusb1_tll_data5", NULL),
+ _OMAP3_MUXENTRY(ETK_D6, 20,
+ "etk_d6", "mcbsp5_dx", "sdmmc3_dat2", "hsusb1_data6",
+ "gpio_20", NULL, "hsusb1_tll_data6", NULL),
+ _OMAP3_MUXENTRY(ETK_D7, 21,
+ "etk_d7", "mcspi3_cs1", "sdmmc3_dat7", "hsusb1_data3",
+ "gpio_21", "mm1_txen_n", "hsusb1_tll_data3", NULL),
+ _OMAP3_MUXENTRY(ETK_D8, 22,
+ "etk_d8", "sys_drm_msecure", "sdmmc3_dat6", "hsusb1_dir",
+ "gpio_22", NULL, "hsusb1_tll_dir", NULL),
+ _OMAP3_MUXENTRY(ETK_D9, 23,
+ "etk_d9", "sys_secure_indicator", "sdmmc3_dat5", "hsusb1_nxt",
+ "gpio_23", "mm1_rxdm", "hsusb1_tll_nxt", NULL),
+ { .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define omap3_cbb_subset NULL
+#endif
+
+/*
+ * Balls for CBB package
+ * 515-pin s-PBGA Package, 0.50mm Ball Pitch (Top), 0.40mm Ball Pitch (Bottom)
+ */
+#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_DEBUG_FS) \
+ && defined(CONFIG_OMAP_PACKAGE_CBB)
+struct omap_ball __initdata omap3_cbb_ball[] = {
+ _OMAP3_BALLENTRY(CAM_D0, "ag17", NULL),
+ _OMAP3_BALLENTRY(CAM_D1, "ah17", NULL),
+ _OMAP3_BALLENTRY(CAM_D10, "b25", NULL),
+ _OMAP3_BALLENTRY(CAM_D11, "c26", NULL),
+ _OMAP3_BALLENTRY(CAM_D2, "b24", NULL),
+ _OMAP3_BALLENTRY(CAM_D3, "c24", NULL),
+ _OMAP3_BALLENTRY(CAM_D4, "d24", NULL),
+ _OMAP3_BALLENTRY(CAM_D5, "a25", NULL),
+ _OMAP3_BALLENTRY(CAM_D6, "k28", NULL),
+ _OMAP3_BALLENTRY(CAM_D7, "l28", NULL),
+ _OMAP3_BALLENTRY(CAM_D8, "k27", NULL),
+ _OMAP3_BALLENTRY(CAM_D9, "l27", NULL),
+ _OMAP3_BALLENTRY(CAM_FLD, "c23", NULL),
+ _OMAP3_BALLENTRY(CAM_HS, "a24", NULL),
+ _OMAP3_BALLENTRY(CAM_PCLK, "c27", NULL),
+ _OMAP3_BALLENTRY(CAM_STROBE, "d25", NULL),
+ _OMAP3_BALLENTRY(CAM_VS, "a23", NULL),
+ _OMAP3_BALLENTRY(CAM_WEN, "b23", NULL),
+ _OMAP3_BALLENTRY(CAM_XCLKA, "c25", NULL),
+ _OMAP3_BALLENTRY(CAM_XCLKB, "b26", NULL),
+ _OMAP3_BALLENTRY(CSI2_DX0, "ag19", NULL),
+ _OMAP3_BALLENTRY(CSI2_DX1, "ag18", NULL),
+ _OMAP3_BALLENTRY(CSI2_DY0, "ah19", NULL),
+ _OMAP3_BALLENTRY(CSI2_DY1, "ah18", NULL),
+ _OMAP3_BALLENTRY(DSS_ACBIAS, "e27", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA0, "ag22", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA1, "ah22", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA10, "ad28", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA11, "ad27", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA12, "ab28", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA13, "ab27", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA14, "aa28", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA15, "aa27", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA16, "g25", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA17, "h27", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA18, "h26", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA19, "h25", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA2, "ag23", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA20, "e28", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA21, "j26", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA22, "ac27", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA23, "ac28", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA3, "ah23", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA4, "ag24", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA5, "ah24", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA6, "e26", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA7, "f28", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA8, "f27", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA9, "g26", NULL),
+ _OMAP3_BALLENTRY(DSS_HSYNC, "d26", NULL),
+ _OMAP3_BALLENTRY(DSS_PCLK, "d28", NULL),
+ _OMAP3_BALLENTRY(DSS_VSYNC, "d27", NULL),
+ _OMAP3_BALLENTRY(ETK_CLK, "af10", NULL),
+ _OMAP3_BALLENTRY(ETK_CTL, "ae10", NULL),
+ _OMAP3_BALLENTRY(ETK_D0, "af11", NULL),
+ _OMAP3_BALLENTRY(ETK_D1, "ag12", NULL),
+ _OMAP3_BALLENTRY(ETK_D10, "ae7", NULL),
+ _OMAP3_BALLENTRY(ETK_D11, "af7", NULL),
+ _OMAP3_BALLENTRY(ETK_D12, "ag7", NULL),
+ _OMAP3_BALLENTRY(ETK_D13, "ah7", NULL),
+ _OMAP3_BALLENTRY(ETK_D14, "ag8", NULL),
+ _OMAP3_BALLENTRY(ETK_D15, "ah8", NULL),
+ _OMAP3_BALLENTRY(ETK_D2, "ah12", NULL),
+ _OMAP3_BALLENTRY(ETK_D3, "ae13", NULL),
+ _OMAP3_BALLENTRY(ETK_D4, "ae11", NULL),
+ _OMAP3_BALLENTRY(ETK_D5, "ah9", NULL),
+ _OMAP3_BALLENTRY(ETK_D6, "af13", NULL),
+ _OMAP3_BALLENTRY(ETK_D7, "ah14", NULL),
+ _OMAP3_BALLENTRY(ETK_D8, "af9", NULL),
+ _OMAP3_BALLENTRY(ETK_D9, "ag9", NULL),
+ _OMAP3_BALLENTRY(GPMC_A1, "n4", "ac15"),
+ _OMAP3_BALLENTRY(GPMC_A10, "k3", "ab19"),
+ _OMAP3_BALLENTRY(GPMC_A2, "m4", "ab15"),
+ _OMAP3_BALLENTRY(GPMC_A3, "l4", "ac16"),
+ _OMAP3_BALLENTRY(GPMC_A4, "k4", "ab16"),
+ _OMAP3_BALLENTRY(GPMC_A5, "t3", "ac17"),
+ _OMAP3_BALLENTRY(GPMC_A6, "r3", "ab17"),
+ _OMAP3_BALLENTRY(GPMC_A7, "n3", "ac18"),
+ _OMAP3_BALLENTRY(GPMC_A8, "m3", "ab18"),
+ _OMAP3_BALLENTRY(GPMC_A9, "l3", "ac19"),
+ _OMAP3_BALLENTRY(GPMC_CLK, "t4", "w2"),
+ _OMAP3_BALLENTRY(GPMC_D10, "p1", "ab4"),
+ _OMAP3_BALLENTRY(GPMC_D11, "r1", "ac4"),
+ _OMAP3_BALLENTRY(GPMC_D12, "r2", "ab6"),
+ _OMAP3_BALLENTRY(GPMC_D13, "t2", "ac6"),
+ _OMAP3_BALLENTRY(GPMC_D14, "w1", "ab7"),
+ _OMAP3_BALLENTRY(GPMC_D15, "y1", "ac7"),
+ _OMAP3_BALLENTRY(GPMC_D8, "h2", "ab3"),
+ _OMAP3_BALLENTRY(GPMC_D9, "k2", "ac3"),
+ _OMAP3_BALLENTRY(GPMC_NBE0_CLE, "g3", "ac12"),
+ _OMAP3_BALLENTRY(GPMC_NBE1, "u3", NULL),
+ _OMAP3_BALLENTRY(GPMC_NCS1, "h3", "y1"),
+ _OMAP3_BALLENTRY(GPMC_NCS2, "v8", NULL),
+ _OMAP3_BALLENTRY(GPMC_NCS3, "u8", NULL),
+ _OMAP3_BALLENTRY(GPMC_NCS4, "t8", NULL),
+ _OMAP3_BALLENTRY(GPMC_NCS5, "r8", NULL),
+ _OMAP3_BALLENTRY(GPMC_NCS6, "p8", NULL),
+ _OMAP3_BALLENTRY(GPMC_NCS7, "n8", NULL),
+ _OMAP3_BALLENTRY(GPMC_NWP, "h1", "ab10"),
+ _OMAP3_BALLENTRY(GPMC_WAIT1, "l8", "ac10"),
+ _OMAP3_BALLENTRY(GPMC_WAIT2, "k8", NULL),
+ _OMAP3_BALLENTRY(GPMC_WAIT3, "j8", NULL),
+ _OMAP3_BALLENTRY(HDQ_SIO, "j25", NULL),
+ _OMAP3_BALLENTRY(HSUSB0_CLK, "t28", NULL),
+ _OMAP3_BALLENTRY(HSUSB0_DATA0, "t27", NULL),
+ _OMAP3_BALLENTRY(HSUSB0_DATA1, "u28", NULL),
+ _OMAP3_BALLENTRY(HSUSB0_DATA2, "u27", NULL),
+ _OMAP3_BALLENTRY(HSUSB0_DATA3, "u26", NULL),
+ _OMAP3_BALLENTRY(HSUSB0_DATA4, "u25", NULL),
+ _OMAP3_BALLENTRY(HSUSB0_DATA5, "v28", NULL),
+ _OMAP3_BALLENTRY(HSUSB0_DATA6, "v27", NULL),
+ _OMAP3_BALLENTRY(HSUSB0_DATA7, "v26", NULL),
+ _OMAP3_BALLENTRY(HSUSB0_DIR, "r28", NULL),
+ _OMAP3_BALLENTRY(HSUSB0_NXT, "t26", NULL),
+ _OMAP3_BALLENTRY(HSUSB0_STP, "t25", NULL),
+ _OMAP3_BALLENTRY(I2C2_SCL, "af15", NULL),
+ _OMAP3_BALLENTRY(I2C2_SDA, "ae15", NULL),
+ _OMAP3_BALLENTRY(I2C3_SCL, "af14", NULL),
+ _OMAP3_BALLENTRY(I2C3_SDA, "ag14", NULL),
+ _OMAP3_BALLENTRY(I2C4_SCL, "ad26", NULL),
+ _OMAP3_BALLENTRY(I2C4_SDA, "ae26", NULL),
+ _OMAP3_BALLENTRY(JTAG_EMU0, "aa11", NULL),
+ _OMAP3_BALLENTRY(JTAG_EMU1, "aa10", NULL),
+ _OMAP3_BALLENTRY(MCBSP1_CLKR, "y21", NULL),
+ _OMAP3_BALLENTRY(MCBSP1_CLKX, "w21", NULL),
+ _OMAP3_BALLENTRY(MCBSP1_DR, "u21", NULL),
+ _OMAP3_BALLENTRY(MCBSP1_DX, "v21", NULL),
+ _OMAP3_BALLENTRY(MCBSP1_FSR, "aa21", NULL),
+ _OMAP3_BALLENTRY(MCBSP1_FSX, "k26", NULL),
+ _OMAP3_BALLENTRY(MCBSP2_CLKX, "n21", NULL),
+ _OMAP3_BALLENTRY(MCBSP2_DR, "r21", NULL),
+ _OMAP3_BALLENTRY(MCBSP2_DX, "m21", NULL),
+ _OMAP3_BALLENTRY(MCBSP2_FSX, "p21", NULL),
+ _OMAP3_BALLENTRY(MCBSP3_CLKX, "af5", NULL),
+ _OMAP3_BALLENTRY(MCBSP3_DR, "ae6", NULL),
+ _OMAP3_BALLENTRY(MCBSP3_DX, "af6", NULL),
+ _OMAP3_BALLENTRY(MCBSP3_FSX, "ae5", NULL),
+ _OMAP3_BALLENTRY(MCBSP4_CLKX, "ae1", NULL),
+ _OMAP3_BALLENTRY(MCBSP4_DR, "ad1", NULL),
+ _OMAP3_BALLENTRY(MCBSP4_DX, "ad2", NULL),
+ _OMAP3_BALLENTRY(MCBSP4_FSX, "ac1", NULL),
+ _OMAP3_BALLENTRY(MCBSP_CLKS, "t21", NULL),
+ _OMAP3_BALLENTRY(MCSPI1_CLK, "ab3", NULL),
+ _OMAP3_BALLENTRY(MCSPI1_CS0, "ac2", NULL),
+ _OMAP3_BALLENTRY(MCSPI1_CS1, "ac3", NULL),
+ _OMAP3_BALLENTRY(MCSPI1_CS2, "ab1", NULL),
+ _OMAP3_BALLENTRY(MCSPI1_CS3, "ab2", NULL),
+ _OMAP3_BALLENTRY(MCSPI1_SIMO, "ab4", NULL),
+ _OMAP3_BALLENTRY(MCSPI1_SOMI, "aa4", NULL),
+ _OMAP3_BALLENTRY(MCSPI2_CLK, "aa3", NULL),
+ _OMAP3_BALLENTRY(MCSPI2_CS0, "y4", NULL),
+ _OMAP3_BALLENTRY(MCSPI2_CS1, "v3", NULL),
+ _OMAP3_BALLENTRY(MCSPI2_SIMO, "y2", NULL),
+ _OMAP3_BALLENTRY(MCSPI2_SOMI, "y3", NULL),
+ _OMAP3_BALLENTRY(SDMMC1_CLK, "n28", NULL),
+ _OMAP3_BALLENTRY(SDMMC1_CMD, "m27", NULL),
+ _OMAP3_BALLENTRY(SDMMC1_DAT0, "n27", NULL),
+ _OMAP3_BALLENTRY(SDMMC1_DAT1, "n26", NULL),
+ _OMAP3_BALLENTRY(SDMMC1_DAT2, "n25", NULL),
+ _OMAP3_BALLENTRY(SDMMC1_DAT3, "p28", NULL),
+ _OMAP3_BALLENTRY(SDMMC1_DAT4, "p27", NULL),
+ _OMAP3_BALLENTRY(SDMMC1_DAT5, "p26", NULL),
+ _OMAP3_BALLENTRY(SDMMC1_DAT6, "r27", NULL),
+ _OMAP3_BALLENTRY(SDMMC1_DAT7, "r25", NULL),
+ _OMAP3_BALLENTRY(SDMMC2_CLK, "ae2", NULL),
+ _OMAP3_BALLENTRY(SDMMC2_CMD, "ag5", NULL),
+ _OMAP3_BALLENTRY(SDMMC2_DAT0, "ah5", NULL),
+ _OMAP3_BALLENTRY(SDMMC2_DAT1, "ah4", NULL),
+ _OMAP3_BALLENTRY(SDMMC2_DAT2, "ag4", NULL),
+ _OMAP3_BALLENTRY(SDMMC2_DAT3, "af4", NULL),
+ _OMAP3_BALLENTRY(SDMMC2_DAT4, "ae4", NULL),
+ _OMAP3_BALLENTRY(SDMMC2_DAT5, "ah3", NULL),
+ _OMAP3_BALLENTRY(SDMMC2_DAT6, "af3", NULL),
+ _OMAP3_BALLENTRY(SDMMC2_DAT7, "ae3", NULL),
+ _OMAP3_BALLENTRY(SYS_BOOT0, "ah26", NULL),
+ _OMAP3_BALLENTRY(SYS_BOOT1, "ag26", NULL),
+ _OMAP3_BALLENTRY(SYS_BOOT2, "ae14", NULL),
+ _OMAP3_BALLENTRY(SYS_BOOT3, "af18", NULL),
+ _OMAP3_BALLENTRY(SYS_BOOT4, "af19", NULL),
+ _OMAP3_BALLENTRY(SYS_BOOT5, "ae21", NULL),
+ _OMAP3_BALLENTRY(SYS_BOOT6, "af21", NULL),
+ _OMAP3_BALLENTRY(SYS_CLKOUT1, "ag25", NULL),
+ _OMAP3_BALLENTRY(SYS_CLKOUT2, "ae22", NULL),
+ _OMAP3_BALLENTRY(SYS_CLKREQ, "af25", NULL),
+ _OMAP3_BALLENTRY(SYS_NIRQ, "af26", NULL),
+ _OMAP3_BALLENTRY(SYS_NRESWARM, "af24", NULL),
+ _OMAP3_BALLENTRY(SYS_OFF_MODE, "af22", NULL),
+ _OMAP3_BALLENTRY(UART1_CTS, "w8", NULL),
+ _OMAP3_BALLENTRY(UART1_RTS, "aa9", NULL),
+ _OMAP3_BALLENTRY(UART1_RX, "y8", NULL),
+ _OMAP3_BALLENTRY(UART1_TX, "aa8", NULL),
+ _OMAP3_BALLENTRY(UART2_CTS, "ab26", NULL),
+ _OMAP3_BALLENTRY(UART2_RTS, "ab25", NULL),
+ _OMAP3_BALLENTRY(UART2_RX, "ad25", NULL),
+ _OMAP3_BALLENTRY(UART2_TX, "aa25", NULL),
+ _OMAP3_BALLENTRY(UART3_CTS_RCTX, "h18", NULL),
+ _OMAP3_BALLENTRY(UART3_RTS_SD, "h19", NULL),
+ _OMAP3_BALLENTRY(UART3_RX_IRRX, "h20", NULL),
+ _OMAP3_BALLENTRY(UART3_TX_IRTX, "h21", NULL),
+ { .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define omap3_cbb_ball NULL
+#endif
+
+/*
+ * Signals different on 36XX CBP package comapared to 34XX CBC package
+ */
+#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_OMAP_PACKAGE_CBP)
+struct omap_mux __initdata omap36xx_cbp_subset[] = {
+ _OMAP3_MUXENTRY(CAM_D0, 99,
+ "cam_d0", NULL, "csi2_dx2", NULL,
+ "gpio_99", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CAM_D1, 100,
+ "cam_d1", NULL, "csi2_dy2", NULL,
+ "gpio_100", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CAM_D10, 109,
+ "cam_d10", "ssi2_wake", NULL, NULL,
+ "gpio_109", "hw_dbg8", NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CAM_D2, 101,
+ "cam_d2", "ssi2_rdy_tx", NULL, NULL,
+ "gpio_101", "hw_dbg4", NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CAM_D3, 102,
+ "cam_d3", "ssi2_dat_rx", NULL, NULL,
+ "gpio_102", "hw_dbg5", NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CAM_D4, 103,
+ "cam_d4", "ssi2_flag_rx", NULL, NULL,
+ "gpio_103", "hw_dbg6", NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CAM_D5, 104,
+ "cam_d5", "ssi2_rdy_rx", NULL, NULL,
+ "gpio_104", "hw_dbg7", NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CAM_HS, 94,
+ "cam_hs", "ssi2_dat_tx", NULL, NULL,
+ "gpio_94", "hw_dbg0", NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(CAM_VS, 95,
+ "cam_vs", "ssi2_flag_tx", NULL, NULL,
+ "gpio_95", "hw_dbg1", NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(DSS_DATA0, 70,
+ "dss_data0", "dsi_dx0", "uart1_cts", NULL,
+ "gpio_70", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(DSS_DATA1, 71,
+ "dss_data1", "dsi_dy0", "uart1_rts", NULL,
+ "gpio_71", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(DSS_DATA2, 72,
+ "dss_data2", "dsi_dx1", NULL, NULL,
+ "gpio_72", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(DSS_DATA3, 73,
+ "dss_data3", "dsi_dy1", NULL, NULL,
+ "gpio_73", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(DSS_DATA4, 74,
+ "dss_data4", "dsi_dx2", "uart3_rx_irrx", NULL,
+ "gpio_74", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(DSS_DATA5, 75,
+ "dss_data5", "dsi_dy2", "uart3_tx_irtx", NULL,
+ "gpio_75", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(DSS_DATA6, 76,
+ "dss_data6", NULL, "uart1_tx", "dssvenc656_data6",
+ "gpio_76", "hw_dbg14", NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(DSS_DATA7, 77,
+ "dss_data7", NULL, "uart1_rx", "dssvenc656_data7",
+ "gpio_77", "hw_dbg15", NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(DSS_DATA8, 78,
+ "dss_data8", NULL, "uart3_rx_irrx", NULL,
+ "gpio_78", "hw_dbg16", NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(DSS_DATA9, 79,
+ "dss_data9", NULL, "uart3_tx_irtx", NULL,
+ "gpio_79", "hw_dbg17", NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(ETK_D12, 26,
+ "etk_d12", "sys_drm_msecure", NULL, "hsusb2_dir",
+ "gpio_26", NULL, "hsusb2_tll_dir", "hw_dbg14"),
+ _OMAP3_MUXENTRY(GPMC_A11, 0,
+ "gpmc_a11", NULL, NULL, NULL,
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(GPMC_WAIT2, 64,
+ "gpmc_wait2", NULL, "uart4_tx", NULL,
+ "gpio_64", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(GPMC_WAIT3, 65,
+ "gpmc_wait3", "sys_ndmareq1", "uart4_rx", NULL,
+ "gpio_65", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(HSUSB0_DATA0, 125,
+ "hsusb0_data0", NULL, "uart3_tx_irtx", NULL,
+ "gpio_125", "uart2_tx", NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(HSUSB0_DATA1, 130,
+ "hsusb0_data1", NULL, "uart3_rx_irrx", NULL,
+ "gpio_130", "uart2_rx", NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(HSUSB0_DATA2, 131,
+ "hsusb0_data2", NULL, "uart3_rts_sd", NULL,
+ "gpio_131", "uart2_rts", NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(HSUSB0_DATA3, 169,
+ "hsusb0_data3", NULL, "uart3_cts_rctx", NULL,
+ "gpio_169", "uart2_cts", NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(MCBSP1_CLKR, 156,
+ "mcbsp1_clkr", "mcspi4_clk", "sim_cd", NULL,
+ "gpio_156", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(MCBSP1_FSR, 157,
+ "mcbsp1_fsr", "adpllv2d_dithering_en1",
+ "cam_global_reset", NULL,
+ "gpio_157", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(MCBSP4_CLKX, 152,
+ "mcbsp4_clkx", "ssi1_dat_rx", NULL, NULL,
+ "gpio_152", "hsusb3_tll_data1", "mm3_txse0", "safe_mode"),
+ _OMAP3_MUXENTRY(MCBSP4_DR, 153,
+ "mcbsp4_dr", "ssi1_flag_rx", NULL, NULL,
+ "gpio_153", "hsusb3_tll_data0", "mm3_rxrcv", "safe_mode"),
+ _OMAP3_MUXENTRY(MCBSP4_DX, 154,
+ "mcbsp4_dx", "ssi1_rdy_rx", NULL, NULL,
+ "gpio_154", "hsusb3_tll_data2", "mm3_txdat", "safe_mode"),
+ _OMAP3_MUXENTRY(MCBSP4_FSX, 155,
+ "mcbsp4_fsx", "ssi1_wake", NULL, NULL,
+ "gpio_155", "hsusb3_tll_data3", "mm3_txen_n", "safe_mode"),
+ _OMAP3_MUXENTRY(MCSPI1_CS1, 175,
+ "mcspi1_cs1", "adpllv2d_dithering_en2", NULL, "sdmmc3_cmd",
+ "gpio_175", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(SAD2D_MBUSFLAG, 0,
+ "sad2d_mbusflag", "mad2d_sbusflag", NULL, NULL,
+ NULL, NULL, NULL, NULL),
+ _OMAP3_MUXENTRY(SAD2D_MCAD28, 0,
+ "sad2d_mcad28", "mad2d_mcad28", NULL, NULL,
+ NULL, NULL, NULL, NULL),
+ _OMAP3_MUXENTRY(SAD2D_MCAD29, 0,
+ "sad2d_mcad29", "mad2d_mcad29", NULL, NULL,
+ NULL, NULL, NULL, NULL),
+ _OMAP3_MUXENTRY(SAD2D_MCAD32, 0,
+ "sad2d_mcad32", "mad2d_mcad32", NULL, NULL,
+ NULL, NULL, NULL, NULL),
+ _OMAP3_MUXENTRY(SAD2D_MCAD33, 0,
+ "sad2d_mcad33", "mad2d_mcad33", NULL, NULL,
+ NULL, NULL, NULL, NULL),
+ _OMAP3_MUXENTRY(SAD2D_MCAD34, 0,
+ "sad2d_mcad34", "mad2d_mcad34", NULL, NULL,
+ NULL, NULL, NULL, NULL),
+ _OMAP3_MUXENTRY(SAD2D_MCAD35, 0,
+ "sad2d_mcad35", "mad2d_mcad35", NULL, NULL,
+ NULL, NULL, NULL, NULL),
+ _OMAP3_MUXENTRY(SAD2D_MCAD36, 0,
+ "sad2d_mcad36", "mad2d_mcad36", NULL, NULL,
+ NULL, NULL, NULL, NULL),
+ _OMAP3_MUXENTRY(SAD2D_MREAD, 0,
+ "sad2d_mread", "mad2d_sread", NULL, NULL,
+ NULL, NULL, NULL, NULL),
+ _OMAP3_MUXENTRY(SAD2D_MWRITE, 0,
+ "sad2d_mwrite", "mad2d_swrite", NULL, NULL,
+ NULL, NULL, NULL, NULL),
+ _OMAP3_MUXENTRY(SAD2D_SBUSFLAG, 0,
+ "sad2d_sbusflag", "mad2d_mbusflag", NULL, NULL,
+ NULL, NULL, NULL, NULL),
+ _OMAP3_MUXENTRY(SAD2D_SREAD, 0,
+ "sad2d_sread", "mad2d_mread", NULL, NULL,
+ NULL, NULL, NULL, NULL),
+ _OMAP3_MUXENTRY(SAD2D_SWRITE, 0,
+ "sad2d_swrite", "mad2d_mwrite", NULL, NULL,
+ NULL, NULL, NULL, NULL),
+ _OMAP3_MUXENTRY(SDMMC1_CLK, 120,
+ "sdmmc1_clk", "ms_clk", NULL, NULL,
+ "gpio_120", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(SDMMC1_CMD, 121,
+ "sdmmc1_cmd", "ms_bs", NULL, NULL,
+ "gpio_121", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(SDMMC1_DAT0, 122,
+ "sdmmc1_dat0", "ms_dat0", NULL, NULL,
+ "gpio_122", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(SDMMC1_DAT1, 123,
+ "sdmmc1_dat1", "ms_dat1", NULL, NULL,
+ "gpio_123", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(SDMMC1_DAT2, 124,
+ "sdmmc1_dat2", "ms_dat2", NULL, NULL,
+ "gpio_124", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(SDMMC1_DAT3, 125,
+ "sdmmc1_dat3", "ms_dat3", NULL, NULL,
+ "gpio_125", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(SDRC_CKE0, 0,
+ "sdrc_cke0", NULL, NULL, NULL,
+ NULL, NULL, NULL, "safe_mode_out1"),
+ _OMAP3_MUXENTRY(SDRC_CKE1, 0,
+ "sdrc_cke1", NULL, NULL, NULL,
+ NULL, NULL, NULL, "safe_mode_out1"),
+ _OMAP3_MUXENTRY(SIM_IO, 126,
+ "sim_io", "sim_io_low_impedance", NULL, NULL,
+ "gpio_126", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(SIM_CLK, 127,
+ "sim_clk", NULL, NULL, NULL,
+ "gpio_127", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(SIM_PWRCTRL, 128,
+ "sim_pwrctrl", NULL, NULL, NULL,
+ "gpio_128", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(SIM_RST, 129,
+ "sim_rst", NULL, NULL, NULL,
+ "gpio_129", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(SYS_BOOT0, 2,
+ "sys_boot0", NULL, NULL, "dss_data18",
+ "gpio_2", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(SYS_BOOT1, 3,
+ "sys_boot1", NULL, NULL, "dss_data19",
+ "gpio_3", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(SYS_BOOT3, 5,
+ "sys_boot3", NULL, NULL, "dss_data20",
+ "gpio_5", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(SYS_BOOT4, 6,
+ "sys_boot4", "sdmmc2_dir_dat2", NULL, "dss_data21",
+ "gpio_6", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(SYS_BOOT5, 7,
+ "sys_boot5", "sdmmc2_dir_dat3", NULL, "dss_data22",
+ "gpio_7", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(SYS_BOOT6, 8,
+ "sys_boot6", NULL, NULL, "dss_data23",
+ "gpio_8", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(UART1_CTS, 150,
+ "uart1_cts", "ssi1_rdy_tx", NULL, NULL,
+ "gpio_150", "hsusb3_tll_clk", NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(UART1_RTS, 149,
+ "uart1_rts", "ssi1_flag_tx", NULL, NULL,
+ "gpio_149", NULL, NULL, "safe_mode"),
+ _OMAP3_MUXENTRY(UART1_TX, 148,
+ "uart1_tx", "ssi1_dat_tx", NULL, NULL,
+ "gpio_148", NULL, NULL, "safe_mode"),
+ { .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define omap36xx_cbp_subset NULL
+#endif
+
+/*
+ * Balls for 36XX CBP package
+ * 515-pin s-PBGA Package, 0.50mm Ball Pitch (Top), 0.40mm Ball Pitch (Bottom)
+ */
+#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_DEBUG_FS) \
+ && defined (CONFIG_OMAP_PACKAGE_CBP)
+struct omap_ball __initdata omap36xx_cbp_ball[] = {
+ _OMAP3_BALLENTRY(CAM_D0, "ag17", NULL),
+ _OMAP3_BALLENTRY(CAM_D1, "ah17", NULL),
+ _OMAP3_BALLENTRY(CAM_D10, "b25", NULL),
+ _OMAP3_BALLENTRY(CAM_D11, "c26", NULL),
+ _OMAP3_BALLENTRY(CAM_D2, "b24", NULL),
+ _OMAP3_BALLENTRY(CAM_D3, "c24", NULL),
+ _OMAP3_BALLENTRY(CAM_D4, "d24", NULL),
+ _OMAP3_BALLENTRY(CAM_D5, "a25", NULL),
+ _OMAP3_BALLENTRY(CAM_D6, "k28", NULL),
+ _OMAP3_BALLENTRY(CAM_D7, "l28", NULL),
+ _OMAP3_BALLENTRY(CAM_D8, "k27", NULL),
+ _OMAP3_BALLENTRY(CAM_D9, "l27", NULL),
+ _OMAP3_BALLENTRY(CAM_FLD, "c23", NULL),
+ _OMAP3_BALLENTRY(CAM_HS, "a24", NULL),
+ _OMAP3_BALLENTRY(CAM_PCLK, "c27", NULL),
+ _OMAP3_BALLENTRY(CAM_STROBE, "d25", NULL),
+ _OMAP3_BALLENTRY(CAM_VS, "a23", NULL),
+ _OMAP3_BALLENTRY(CAM_WEN, "b23", NULL),
+ _OMAP3_BALLENTRY(CAM_XCLKA, "c25", NULL),
+ _OMAP3_BALLENTRY(CAM_XCLKB, "b26", NULL),
+ _OMAP3_BALLENTRY(CSI2_DX0, "ag19", NULL),
+ _OMAP3_BALLENTRY(CSI2_DX1, "ag18", NULL),
+ _OMAP3_BALLENTRY(CSI2_DY0, "ah19", NULL),
+ _OMAP3_BALLENTRY(CSI2_DY1, "ah18", NULL),
+ _OMAP3_BALLENTRY(DSS_ACBIAS, "e27", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA0, "ag22", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA1, "ah22", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA10, "ad28", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA11, "ad27", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA12, "ab28", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA13, "ab27", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA14, "aa28", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA15, "aa27", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA16, "g25", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA17, "h27", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA18, "h26", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA19, "h25", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA2, "ag23", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA20, "e28", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA21, "j26", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA22, "ac27", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA23, "ac28", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA3, "ah23", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA4, "ag24", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA5, "ah24", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA6, "e26", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA7, "f28", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA8, "f27", NULL),
+ _OMAP3_BALLENTRY(DSS_DATA9, "g26", NULL),
+ _OMAP3_BALLENTRY(DSS_HSYNC, "d26", NULL),
+ _OMAP3_BALLENTRY(DSS_PCLK, "d28", NULL),
+ _OMAP3_BALLENTRY(DSS_VSYNC, "d27", NULL),
+ _OMAP3_BALLENTRY(ETK_CLK, "af10", NULL),
+ _OMAP3_BALLENTRY(ETK_CTL, "ae10", NULL),
+ _OMAP3_BALLENTRY(ETK_D0, "af11", NULL),
+ _OMAP3_BALLENTRY(ETK_D1, "ag12", NULL),
+ _OMAP3_BALLENTRY(ETK_D10, "ae7", NULL),
+ _OMAP3_BALLENTRY(ETK_D11, "af7", NULL),
+ _OMAP3_BALLENTRY(ETK_D12, "ag7", NULL),
+ _OMAP3_BALLENTRY(ETK_D13, "ah7", NULL),
+ _OMAP3_BALLENTRY(ETK_D14, "ag8", NULL),
+ _OMAP3_BALLENTRY(ETK_D15, "ah8", NULL),
+ _OMAP3_BALLENTRY(ETK_D2, "ah12", NULL),
+ _OMAP3_BALLENTRY(ETK_D3, "ae13", NULL),
+ _OMAP3_BALLENTRY(ETK_D4, "ae11", NULL),
+ _OMAP3_BALLENTRY(ETK_D5, "ah9", NULL),
+ _OMAP3_BALLENTRY(ETK_D6, "af13", NULL),
+ _OMAP3_BALLENTRY(ETK_D7, "ah14", NULL),
+ _OMAP3_BALLENTRY(ETK_D8, "af9", NULL),
+ _OMAP3_BALLENTRY(ETK_D9, "ag9", NULL),
+ _OMAP3_BALLENTRY(GPMC_A1, "n4", "ac15"),
+ _OMAP3_BALLENTRY(GPMC_A10, "k3", "ab19"),
+ _OMAP3_BALLENTRY(GPMC_A11, NULL, "ac20"),
+ _OMAP3_BALLENTRY(GPMC_A2, "m4", "ab15"),
+ _OMAP3_BALLENTRY(GPMC_A3, "l4", "ac16"),
+ _OMAP3_BALLENTRY(GPMC_A4, "k4", "ab16"),
+ _OMAP3_BALLENTRY(GPMC_A5, "t3", "ac17"),
+ _OMAP3_BALLENTRY(GPMC_A6, "r3", "ab17"),
+ _OMAP3_BALLENTRY(GPMC_A7, "n3", "ac18"),
+ _OMAP3_BALLENTRY(GPMC_A8, "m3", "ab18"),
+ _OMAP3_BALLENTRY(GPMC_A9, "l3", "ac19"),
+ _OMAP3_BALLENTRY(GPMC_CLK, "t4", "w2"),
+ _OMAP3_BALLENTRY(GPMC_D0, "k1", "m2"),
+ _OMAP3_BALLENTRY(GPMC_D1, "l1", "m1"),
+ _OMAP3_BALLENTRY(GPMC_D10, "p1", "ab4"),
+ _OMAP3_BALLENTRY(GPMC_D11, "r1", "ac4"),
+ _OMAP3_BALLENTRY(GPMC_D12, "r2", "ab6"),
+ _OMAP3_BALLENTRY(GPMC_D13, "t2", "ac6"),
+ _OMAP3_BALLENTRY(GPMC_D14, "w1", "ab7"),
+ _OMAP3_BALLENTRY(GPMC_D15, "y1", "ac7"),
+ _OMAP3_BALLENTRY(GPMC_D2, "l2", "n2"),
+ _OMAP3_BALLENTRY(GPMC_D3, "p2", "n1"),
+ _OMAP3_BALLENTRY(GPMC_D4, "t1", "r2"),
+ _OMAP3_BALLENTRY(GPMC_D5, "v1", "r1"),
+ _OMAP3_BALLENTRY(GPMC_D6, "v2", "t2"),
+ _OMAP3_BALLENTRY(GPMC_D7, "w2", "t1"),
+ _OMAP3_BALLENTRY(GPMC_D8, "h2", "ab3"),
+ _OMAP3_BALLENTRY(GPMC_D9, "k2", "ac3"),
+ _OMAP3_BALLENTRY(GPMC_NADV_ALE, "f3", "w1"),
+ _OMAP3_BALLENTRY(GPMC_NBE0_CLE, "g3", "ac12"),
+ _OMAP3_BALLENTRY(GPMC_NBE1, "u3", NULL),
+ _OMAP3_BALLENTRY(GPMC_NCS0, "g4", "y2"),
+ _OMAP3_BALLENTRY(GPMC_NCS1, "h3", "y1"),
+ _OMAP3_BALLENTRY(GPMC_NCS2, "v8", NULL),
+ _OMAP3_BALLENTRY(GPMC_NCS3, "u8", NULL),
+ _OMAP3_BALLENTRY(GPMC_NCS4, "t8", NULL),
+ _OMAP3_BALLENTRY(GPMC_NCS5, "r8", NULL),
+ _OMAP3_BALLENTRY(GPMC_NCS6, "p8", NULL),
+ _OMAP3_BALLENTRY(GPMC_NCS7, "n8", NULL),
+ _OMAP3_BALLENTRY(GPMC_NOE, "g2", "v2"),
+ _OMAP3_BALLENTRY(GPMC_NWE, "f4", "v1"),
+ _OMAP3_BALLENTRY(GPMC_NWP, "h1", "ab10"),
+ _OMAP3_BALLENTRY(GPMC_WAIT0, "m8", "ab12"),
+ _OMAP3_BALLENTRY(GPMC_WAIT1, "l8", "ac10"),
+ _OMAP3_BALLENTRY(GPMC_WAIT2, "k8", NULL),
+ _OMAP3_BALLENTRY(GPMC_WAIT3, "j8", NULL),
+ _OMAP3_BALLENTRY(HDQ_SIO, "j25", NULL),
+ _OMAP3_BALLENTRY(HSUSB0_CLK, "t28", NULL),
+ _OMAP3_BALLENTRY(HSUSB0_DATA0, "t27", NULL),
+ _OMAP3_BALLENTRY(HSUSB0_DATA1, "u28", NULL),
+ _OMAP3_BALLENTRY(HSUSB0_DATA2, "u27", NULL),
+ _OMAP3_BALLENTRY(HSUSB0_DATA3, "u26", NULL),
+ _OMAP3_BALLENTRY(HSUSB0_DATA4, "u25", NULL),
+ _OMAP3_BALLENTRY(HSUSB0_DATA5, "v28", NULL),
+ _OMAP3_BALLENTRY(HSUSB0_DATA6, "v27", NULL),
+ _OMAP3_BALLENTRY(HSUSB0_DATA7, "v26", NULL),
+ _OMAP3_BALLENTRY(HSUSB0_DIR, "r28", NULL),
+ _OMAP3_BALLENTRY(HSUSB0_NXT, "t26", NULL),
+ _OMAP3_BALLENTRY(HSUSB0_STP, "t25", NULL),
+ _OMAP3_BALLENTRY(I2C1_SCL, "k21", NULL),
+ _OMAP3_BALLENTRY(I2C1_SDA, "j21", NULL),
+ _OMAP3_BALLENTRY(I2C2_SCL, "af15", NULL),
+ _OMAP3_BALLENTRY(I2C2_SDA, "ae15", NULL),
+ _OMAP3_BALLENTRY(I2C3_SCL, "af14", NULL),
+ _OMAP3_BALLENTRY(I2C3_SDA, "ag14", NULL),
+ _OMAP3_BALLENTRY(I2C4_SCL, "ad26", NULL),
+ _OMAP3_BALLENTRY(I2C4_SDA, "ae26", NULL),
+ _OMAP3_BALLENTRY(JTAG_EMU0, "aa11", NULL),
+ _OMAP3_BALLENTRY(JTAG_EMU1, "aa10", NULL),
+ _OMAP3_BALLENTRY(JTAG_RTCK, "aa12", NULL),
+ _OMAP3_BALLENTRY(JTAG_TCK, "aa13", NULL),
+ _OMAP3_BALLENTRY(JTAG_TDI, "aa20", NULL),
+ _OMAP3_BALLENTRY(JTAG_TDO, "aa19", NULL),
+ _OMAP3_BALLENTRY(JTAG_TMS_TMSC, "aa18", NULL),
+ _OMAP3_BALLENTRY(MCBSP1_CLKR, "y21", NULL),
+ _OMAP3_BALLENTRY(MCBSP1_CLKX, "w21", NULL),
+ _OMAP3_BALLENTRY(MCBSP1_DR, "u21", NULL),
+ _OMAP3_BALLENTRY(MCBSP1_DX, "v21", NULL),
+ _OMAP3_BALLENTRY(MCBSP1_FSR, "aa21", NULL),
+ _OMAP3_BALLENTRY(MCBSP1_FSX, "k26", NULL),
+ _OMAP3_BALLENTRY(MCBSP2_CLKX, "n21", NULL),
+ _OMAP3_BALLENTRY(MCBSP2_DR, "r21", NULL),
+ _OMAP3_BALLENTRY(MCBSP2_DX, "m21", NULL),
+ _OMAP3_BALLENTRY(MCBSP2_FSX, "p21", NULL),
+ _OMAP3_BALLENTRY(MCBSP3_CLKX, "af5", NULL),
+ _OMAP3_BALLENTRY(MCBSP3_DR, "ae6", NULL),
+ _OMAP3_BALLENTRY(MCBSP3_DX, "af6", NULL),
+ _OMAP3_BALLENTRY(MCBSP3_FSX, "ae5", NULL),
+ _OMAP3_BALLENTRY(MCBSP4_CLKX, "ae1", NULL),
+ _OMAP3_BALLENTRY(MCBSP4_DR, "ad1", NULL),
+ _OMAP3_BALLENTRY(MCBSP4_DX, "ad2", NULL),
+ _OMAP3_BALLENTRY(MCBSP4_FSX, "ac1", NULL),
+ _OMAP3_BALLENTRY(MCBSP_CLKS, "t21", NULL),
+ _OMAP3_BALLENTRY(MCSPI1_CLK, "ab3", NULL),
+ _OMAP3_BALLENTRY(MCSPI1_CS0, "ac2", NULL),
+ _OMAP3_BALLENTRY(MCSPI1_CS1, "ac3", NULL),
+ _OMAP3_BALLENTRY(MCSPI1_CS2, "ab1", NULL),
+ _OMAP3_BALLENTRY(MCSPI1_CS3, "ab2", NULL),
+ _OMAP3_BALLENTRY(MCSPI1_SIMO, "ab4", NULL),
+ _OMAP3_BALLENTRY(MCSPI1_SOMI, "aa4", NULL),
+ _OMAP3_BALLENTRY(MCSPI2_CLK, "aa3", NULL),
+ _OMAP3_BALLENTRY(MCSPI2_CS0, "y4", NULL),
+ _OMAP3_BALLENTRY(MCSPI2_CS1, "v3", NULL),
+ _OMAP3_BALLENTRY(MCSPI2_SIMO, "y2", NULL),
+ _OMAP3_BALLENTRY(MCSPI2_SOMI, "y3", NULL),
+ _OMAP3_BALLENTRY(SDMMC1_CLK, "n28", NULL),
+ _OMAP3_BALLENTRY(SDMMC1_CMD, "m27", NULL),
+ _OMAP3_BALLENTRY(SDMMC1_DAT0, "n27", NULL),
+ _OMAP3_BALLENTRY(SDMMC1_DAT1, "n26", NULL),
+ _OMAP3_BALLENTRY(SDMMC1_DAT2, "n25", NULL),
+ _OMAP3_BALLENTRY(SDMMC1_DAT3, "p28", NULL),
+ _OMAP3_BALLENTRY(SDMMC2_CLK, "ae2", NULL),
+ _OMAP3_BALLENTRY(SDMMC2_CMD, "ag5", NULL),
+ _OMAP3_BALLENTRY(SDMMC2_DAT0, "ah5", NULL),
+ _OMAP3_BALLENTRY(SDMMC2_DAT1, "ah4", NULL),
+ _OMAP3_BALLENTRY(SDMMC2_DAT2, "ag4", NULL),
+ _OMAP3_BALLENTRY(SDMMC2_DAT3, "af4", NULL),
+ _OMAP3_BALLENTRY(SDMMC2_DAT4, "ae4", NULL),
+ _OMAP3_BALLENTRY(SDMMC2_DAT5, "ah3", NULL),
+ _OMAP3_BALLENTRY(SDMMC2_DAT6, "af3", NULL),
+ _OMAP3_BALLENTRY(SDMMC2_DAT7, "ae3", NULL),
+ _OMAP3_BALLENTRY(SDRC_A0, NULL, "n22"),
+ _OMAP3_BALLENTRY(SDRC_A1, NULL, "n23"),
+ _OMAP3_BALLENTRY(SDRC_A10, NULL, "v22"),
+ _OMAP3_BALLENTRY(SDRC_A11, NULL, "v23"),
+ _OMAP3_BALLENTRY(SDRC_A12, NULL, "w22"),
+ _OMAP3_BALLENTRY(SDRC_A13, NULL, "w23"),
+ _OMAP3_BALLENTRY(SDRC_A14, NULL, "y22"),
+ _OMAP3_BALLENTRY(SDRC_A2, NULL, "p22"),
+ _OMAP3_BALLENTRY(SDRC_A3, NULL, "p23"),
+ _OMAP3_BALLENTRY(SDRC_A4, NULL, "r22"),
+ _OMAP3_BALLENTRY(SDRC_A5, NULL, "r23"),
+ _OMAP3_BALLENTRY(SDRC_A6, NULL, "t22"),
+ _OMAP3_BALLENTRY(SDRC_A7, NULL, "t23"),
+ _OMAP3_BALLENTRY(SDRC_A8, NULL, "u22"),
+ _OMAP3_BALLENTRY(SDRC_A9, NULL, "u23"),
+ _OMAP3_BALLENTRY(SDRC_BA0, "h9", "ab21"),
+ _OMAP3_BALLENTRY(SDRC_BA1, "h10", "ac21"),
+ _OMAP3_BALLENTRY(SDRC_CKE0, "h16", "j22"),
+ _OMAP3_BALLENTRY(SDRC_CKE1, "h17", "j23"),
+ _OMAP3_BALLENTRY(SDRC_CLK, "a13", "a11"),
+ _OMAP3_BALLENTRY(SDRC_D0, NULL, "j2"),
+ _OMAP3_BALLENTRY(SDRC_D1, NULL, "j1"),
+ _OMAP3_BALLENTRY(SDRC_D10, "c15", "b14"),
+ _OMAP3_BALLENTRY(SDRC_D11, "b16", "a14"),
+ _OMAP3_BALLENTRY(SDRC_D12, "d17", "b16"),
+ _OMAP3_BALLENTRY(SDRC_D13, "c17", "a16"),
+ _OMAP3_BALLENTRY(SDRC_D14, "b17", "b19"),
+ _OMAP3_BALLENTRY(SDRC_D15, "d18", "a19"),
+ _OMAP3_BALLENTRY(SDRC_D16, NULL, "b3"),
+ _OMAP3_BALLENTRY(SDRC_D17, NULL, "a3"),
+ _OMAP3_BALLENTRY(SDRC_D18, NULL, "b5"),
+ _OMAP3_BALLENTRY(SDRC_D19, NULL, "a5"),
+ _OMAP3_BALLENTRY(SDRC_D2, NULL, "g2"),
+ _OMAP3_BALLENTRY(SDRC_D20, NULL, "b8"),
+ _OMAP3_BALLENTRY(SDRC_D21, NULL, "a8"),
+ _OMAP3_BALLENTRY(SDRC_D22, NULL, "b9"),
+ _OMAP3_BALLENTRY(SDRC_D23, NULL, "a9"),
+ _OMAP3_BALLENTRY(SDRC_D24, NULL, "b21"),
+ _OMAP3_BALLENTRY(SDRC_D25, NULL, "a21"),
+ _OMAP3_BALLENTRY(SDRC_D26, NULL, "d22"),
+ _OMAP3_BALLENTRY(SDRC_D27, NULL, "d23"),
+ _OMAP3_BALLENTRY(SDRC_D28, NULL, "e22"),
+ _OMAP3_BALLENTRY(SDRC_D29, NULL, "e23"),
+ _OMAP3_BALLENTRY(SDRC_D3, NULL, "g1"),
+ _OMAP3_BALLENTRY(SDRC_D30, NULL, "g22"),
+ _OMAP3_BALLENTRY(SDRC_D31, NULL, "g23"),
+ _OMAP3_BALLENTRY(SDRC_D4, NULL, "f2"),
+ _OMAP3_BALLENTRY(SDRC_D5, NULL, "f1"),
+ _OMAP3_BALLENTRY(SDRC_D6, NULL, "d2"),
+ _OMAP3_BALLENTRY(SDRC_D7, NULL, "d1"),
+ _OMAP3_BALLENTRY(SDRC_D8, "c14", "b13"),
+ _OMAP3_BALLENTRY(SDRC_D9, "b14", "a13"),
+ _OMAP3_BALLENTRY(SDRC_DM0, NULL, "c1"),
+ _OMAP3_BALLENTRY(SDRC_DM1, "a16", "a17"),
+ _OMAP3_BALLENTRY(SDRC_DM2, NULL, "a6"),
+ _OMAP3_BALLENTRY(SDRC_DM3, NULL, "a20"),
+ _OMAP3_BALLENTRY(SDRC_DQS0, NULL, "c2"),
+ _OMAP3_BALLENTRY(SDRC_DQS1, "a17", "b17"),
+ _OMAP3_BALLENTRY(SDRC_DQS2, NULL, "b6"),
+ _OMAP3_BALLENTRY(SDRC_DQS3, NULL, "b20"),
+ _OMAP3_BALLENTRY(SDRC_NCAS, "h13", "l22"),
+ _OMAP3_BALLENTRY(SDRC_NCLK, "a14", "b11"),
+ _OMAP3_BALLENTRY(SDRC_NCS0, "h11", "m22"),
+ _OMAP3_BALLENTRY(SDRC_NCS1, "h12", "m23"),
+ _OMAP3_BALLENTRY(SDRC_NRAS, "h14", "l23"),
+ _OMAP3_BALLENTRY(SDRC_NWE, "h15", "k23"),
+ _OMAP3_BALLENTRY(SIM_CLK, "p26", NULL),
+ _OMAP3_BALLENTRY(SIM_IO, "p27", NULL),
+ _OMAP3_BALLENTRY(SIM_PWRCTRL, "r27", NULL),
+ _OMAP3_BALLENTRY(SIM_RST, "r25", NULL),
+ _OMAP3_BALLENTRY(SYS_32K, "ae25", NULL),
+ _OMAP3_BALLENTRY(SYS_BOOT0, "ah26", NULL),
+ _OMAP3_BALLENTRY(SYS_BOOT1, "ag26", NULL),
+ _OMAP3_BALLENTRY(SYS_BOOT2, "ae14", NULL),
+ _OMAP3_BALLENTRY(SYS_BOOT3, "af18", NULL),
+ _OMAP3_BALLENTRY(SYS_BOOT4, "af19", NULL),
+ _OMAP3_BALLENTRY(SYS_BOOT5, "ae21", NULL),
+ _OMAP3_BALLENTRY(SYS_BOOT6, "af21", NULL),
+ _OMAP3_BALLENTRY(SYS_CLKOUT1, "ag25", NULL),
+ _OMAP3_BALLENTRY(SYS_CLKOUT2, "ae22", NULL),
+ _OMAP3_BALLENTRY(SYS_CLKREQ, "af25", NULL),
+ _OMAP3_BALLENTRY(SYS_NIRQ, "af26", NULL),
+ _OMAP3_BALLENTRY(SYS_NRESWARM, "af24", NULL),
+ _OMAP3_BALLENTRY(SYS_OFF_MODE, "af22", NULL),
+ _OMAP3_BALLENTRY(UART1_CTS, "w8", NULL),
+ _OMAP3_BALLENTRY(UART1_RTS, "aa9", NULL),
+ _OMAP3_BALLENTRY(UART1_RX, "y8", NULL),
+ _OMAP3_BALLENTRY(UART1_TX, "aa8", NULL),
+ _OMAP3_BALLENTRY(UART2_CTS, "ab26", NULL),
+ _OMAP3_BALLENTRY(UART2_RTS, "ab25", NULL),
+ _OMAP3_BALLENTRY(UART2_RX, "ad25", NULL),
+ _OMAP3_BALLENTRY(UART2_TX, "aa25", NULL),
+ _OMAP3_BALLENTRY(UART3_CTS_RCTX, "h18", NULL),
+ _OMAP3_BALLENTRY(UART3_RTS_SD, "h19", NULL),
+ _OMAP3_BALLENTRY(UART3_RX_IRRX, "h20", NULL),
+ _OMAP3_BALLENTRY(UART3_TX_IRTX, "h21", NULL),
+ { .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define omap36xx_cbp_ball NULL
+#endif
+
+int __init omap3_mux_init(struct omap_board_mux *board_subset, int flags)
+{
+ struct omap_mux *package_subset;
+ struct omap_ball *package_balls;
+
+ switch (flags & OMAP_PACKAGE_MASK) {
+ case (OMAP_PACKAGE_CBC):
+ package_subset = omap3_cbc_subset;
+ package_balls = omap3_cbc_ball;
+ break;
+ case (OMAP_PACKAGE_CBB):
+ package_subset = omap3_cbb_subset;
+ package_balls = omap3_cbb_ball;
+ break;
+ case (OMAP_PACKAGE_CUS):
+ package_subset = omap3_cus_subset;
+ package_balls = omap3_cus_ball;
+ break;
+ case (OMAP_PACKAGE_CBP):
+ package_subset = omap36xx_cbp_subset;
+ package_balls = omap36xx_cbp_ball;
+ break;
+ default:
+ printk(KERN_ERR "mux: Unknown omap package, mux disabled\n");
+ return -EINVAL;
+ }
+
+ return omap_mux_init(OMAP3_CONTROL_PADCONF_MUX_PBASE,
+ OMAP3_CONTROL_PADCONF_MUX_SIZE,
+ omap3_muxmodes, package_subset, board_subset,
+ package_balls);
+}
diff --git a/arch/arm/mach-omap2/mux34xx.h b/arch/arm/mach-omap2/mux34xx.h
new file mode 100644
index 0000000..6543ebf
--- /dev/null
+++ b/arch/arm/mach-omap2/mux34xx.h
@@ -0,0 +1,398 @@
+/*
+ * Copyright (C) 2009 Nokia
+ * Copyright (C) 2009 Texas Instruments
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define OMAP3_CONTROL_PADCONF_MUX_PBASE 0x48002030LU
+
+#define OMAP3_MUX(mode0, mux_value) \
+{ \
+ .reg_offset = (OMAP3_CONTROL_PADCONF_##mode0##_OFFSET), \
+ .value = (mux_value), \
+}
+
+/*
+ * OMAP3 CONTROL_PADCONF* register offsets for pin-muxing
+ *
+ * Extracted from the TRM. Add 0x48002030 to these values to get the
+ * absolute addresses. The name in the macro is the mode-0 name of
+ * the pin. NOTE: These registers are 16-bits wide.
+ *
+ * Note that 34XX TRM uses MMC instead of SDMMC and SAD2D instead
+ * of CHASSIS for some registers. For the defines, we follow the
+ * 36XX naming, and use SDMMC and CHASSIS.
+ */
+#define OMAP3_CONTROL_PADCONF_SDRC_D0_OFFSET 0x000
+#define OMAP3_CONTROL_PADCONF_SDRC_D1_OFFSET 0x002
+#define OMAP3_CONTROL_PADCONF_SDRC_D2_OFFSET 0x004
+#define OMAP3_CONTROL_PADCONF_SDRC_D3_OFFSET 0x006
+#define OMAP3_CONTROL_PADCONF_SDRC_D4_OFFSET 0x008
+#define OMAP3_CONTROL_PADCONF_SDRC_D5_OFFSET 0x00a
+#define OMAP3_CONTROL_PADCONF_SDRC_D6_OFFSET 0x00c
+#define OMAP3_CONTROL_PADCONF_SDRC_D7_OFFSET 0x00e
+#define OMAP3_CONTROL_PADCONF_SDRC_D8_OFFSET 0x010
+#define OMAP3_CONTROL_PADCONF_SDRC_D9_OFFSET 0x012
+#define OMAP3_CONTROL_PADCONF_SDRC_D10_OFFSET 0x014
+#define OMAP3_CONTROL_PADCONF_SDRC_D11_OFFSET 0x016
+#define OMAP3_CONTROL_PADCONF_SDRC_D12_OFFSET 0x018
+#define OMAP3_CONTROL_PADCONF_SDRC_D13_OFFSET 0x01a
+#define OMAP3_CONTROL_PADCONF_SDRC_D14_OFFSET 0x01c
+#define OMAP3_CONTROL_PADCONF_SDRC_D15_OFFSET 0x01e
+#define OMAP3_CONTROL_PADCONF_SDRC_D16_OFFSET 0x020
+#define OMAP3_CONTROL_PADCONF_SDRC_D17_OFFSET 0x022
+#define OMAP3_CONTROL_PADCONF_SDRC_D18_OFFSET 0x024
+#define OMAP3_CONTROL_PADCONF_SDRC_D19_OFFSET 0x026
+#define OMAP3_CONTROL_PADCONF_SDRC_D20_OFFSET 0x028
+#define OMAP3_CONTROL_PADCONF_SDRC_D21_OFFSET 0x02a
+#define OMAP3_CONTROL_PADCONF_SDRC_D22_OFFSET 0x02c
+#define OMAP3_CONTROL_PADCONF_SDRC_D23_OFFSET 0x02e
+#define OMAP3_CONTROL_PADCONF_SDRC_D24_OFFSET 0x030
+#define OMAP3_CONTROL_PADCONF_SDRC_D25_OFFSET 0x032
+#define OMAP3_CONTROL_PADCONF_SDRC_D26_OFFSET 0x034
+#define OMAP3_CONTROL_PADCONF_SDRC_D27_OFFSET 0x036
+#define OMAP3_CONTROL_PADCONF_SDRC_D28_OFFSET 0x038
+#define OMAP3_CONTROL_PADCONF_SDRC_D29_OFFSET 0x03a
+#define OMAP3_CONTROL_PADCONF_SDRC_D30_OFFSET 0x03c
+#define OMAP3_CONTROL_PADCONF_SDRC_D31_OFFSET 0x03e
+#define OMAP3_CONTROL_PADCONF_SDRC_CLK_OFFSET 0x040
+#define OMAP3_CONTROL_PADCONF_SDRC_DQS0_OFFSET 0x042
+#define OMAP3_CONTROL_PADCONF_SDRC_DQS1_OFFSET 0x044
+#define OMAP3_CONTROL_PADCONF_SDRC_DQS2_OFFSET 0x046
+#define OMAP3_CONTROL_PADCONF_SDRC_DQS3_OFFSET 0x048
+#define OMAP3_CONTROL_PADCONF_GPMC_A1_OFFSET 0x04a
+#define OMAP3_CONTROL_PADCONF_GPMC_A2_OFFSET 0x04c
+#define OMAP3_CONTROL_PADCONF_GPMC_A3_OFFSET 0x04e
+#define OMAP3_CONTROL_PADCONF_GPMC_A4_OFFSET 0x050
+#define OMAP3_CONTROL_PADCONF_GPMC_A5_OFFSET 0x052
+#define OMAP3_CONTROL_PADCONF_GPMC_A6_OFFSET 0x054
+#define OMAP3_CONTROL_PADCONF_GPMC_A7_OFFSET 0x056
+#define OMAP3_CONTROL_PADCONF_GPMC_A8_OFFSET 0x058
+#define OMAP3_CONTROL_PADCONF_GPMC_A9_OFFSET 0x05a
+#define OMAP3_CONTROL_PADCONF_GPMC_A10_OFFSET 0x05c
+#define OMAP3_CONTROL_PADCONF_GPMC_D0_OFFSET 0x05e
+#define OMAP3_CONTROL_PADCONF_GPMC_D1_OFFSET 0x060
+#define OMAP3_CONTROL_PADCONF_GPMC_D2_OFFSET 0x062
+#define OMAP3_CONTROL_PADCONF_GPMC_D3_OFFSET 0x064
+#define OMAP3_CONTROL_PADCONF_GPMC_D4_OFFSET 0x066
+#define OMAP3_CONTROL_PADCONF_GPMC_D5_OFFSET 0x068
+#define OMAP3_CONTROL_PADCONF_GPMC_D6_OFFSET 0x06a
+#define OMAP3_CONTROL_PADCONF_GPMC_D7_OFFSET 0x06c
+#define OMAP3_CONTROL_PADCONF_GPMC_D8_OFFSET 0x06e
+#define OMAP3_CONTROL_PADCONF_GPMC_D9_OFFSET 0x070
+#define OMAP3_CONTROL_PADCONF_GPMC_D10_OFFSET 0x072
+#define OMAP3_CONTROL_PADCONF_GPMC_D11_OFFSET 0x074
+#define OMAP3_CONTROL_PADCONF_GPMC_D12_OFFSET 0x076
+#define OMAP3_CONTROL_PADCONF_GPMC_D13_OFFSET 0x078
+#define OMAP3_CONTROL_PADCONF_GPMC_D14_OFFSET 0x07a
+#define OMAP3_CONTROL_PADCONF_GPMC_D15_OFFSET 0x07c
+#define OMAP3_CONTROL_PADCONF_GPMC_NCS0_OFFSET 0x07e
+#define OMAP3_CONTROL_PADCONF_GPMC_NCS1_OFFSET 0x080
+#define OMAP3_CONTROL_PADCONF_GPMC_NCS2_OFFSET 0x082
+#define OMAP3_CONTROL_PADCONF_GPMC_NCS3_OFFSET 0x084
+#define OMAP3_CONTROL_PADCONF_GPMC_NCS4_OFFSET 0x086
+#define OMAP3_CONTROL_PADCONF_GPMC_NCS5_OFFSET 0x088
+#define OMAP3_CONTROL_PADCONF_GPMC_NCS6_OFFSET 0x08a
+#define OMAP3_CONTROL_PADCONF_GPMC_NCS7_OFFSET 0x08c
+#define OMAP3_CONTROL_PADCONF_GPMC_CLK_OFFSET 0x08e
+#define OMAP3_CONTROL_PADCONF_GPMC_NADV_ALE_OFFSET 0x090
+#define OMAP3_CONTROL_PADCONF_GPMC_NOE_OFFSET 0x092
+#define OMAP3_CONTROL_PADCONF_GPMC_NWE_OFFSET 0x094
+#define OMAP3_CONTROL_PADCONF_GPMC_NBE0_CLE_OFFSET 0x096
+#define OMAP3_CONTROL_PADCONF_GPMC_NBE1_OFFSET 0x098
+#define OMAP3_CONTROL_PADCONF_GPMC_NWP_OFFSET 0x09a
+#define OMAP3_CONTROL_PADCONF_GPMC_WAIT0_OFFSET 0x09c
+#define OMAP3_CONTROL_PADCONF_GPMC_WAIT1_OFFSET 0x09e
+#define OMAP3_CONTROL_PADCONF_GPMC_WAIT2_OFFSET 0x0a0
+#define OMAP3_CONTROL_PADCONF_GPMC_WAIT3_OFFSET 0x0a2
+#define OMAP3_CONTROL_PADCONF_DSS_PCLK_OFFSET 0x0a4
+#define OMAP3_CONTROL_PADCONF_DSS_HSYNC_OFFSET 0x0a6
+#define OMAP3_CONTROL_PADCONF_DSS_VSYNC_OFFSET 0x0a8
+#define OMAP3_CONTROL_PADCONF_DSS_ACBIAS_OFFSET 0x0aa
+#define OMAP3_CONTROL_PADCONF_DSS_DATA0_OFFSET 0x0ac
+#define OMAP3_CONTROL_PADCONF_DSS_DATA1_OFFSET 0x0ae
+#define OMAP3_CONTROL_PADCONF_DSS_DATA2_OFFSET 0x0b0
+#define OMAP3_CONTROL_PADCONF_DSS_DATA3_OFFSET 0x0b2
+#define OMAP3_CONTROL_PADCONF_DSS_DATA4_OFFSET 0x0b4
+#define OMAP3_CONTROL_PADCONF_DSS_DATA5_OFFSET 0x0b6
+#define OMAP3_CONTROL_PADCONF_DSS_DATA6_OFFSET 0x0b8
+#define OMAP3_CONTROL_PADCONF_DSS_DATA7_OFFSET 0x0ba
+#define OMAP3_CONTROL_PADCONF_DSS_DATA8_OFFSET 0x0bc
+#define OMAP3_CONTROL_PADCONF_DSS_DATA9_OFFSET 0x0be
+#define OMAP3_CONTROL_PADCONF_DSS_DATA10_OFFSET 0x0c0
+#define OMAP3_CONTROL_PADCONF_DSS_DATA11_OFFSET 0x0c2
+#define OMAP3_CONTROL_PADCONF_DSS_DATA12_OFFSET 0x0c4
+#define OMAP3_CONTROL_PADCONF_DSS_DATA13_OFFSET 0x0c6
+#define OMAP3_CONTROL_PADCONF_DSS_DATA14_OFFSET 0x0c8
+#define OMAP3_CONTROL_PADCONF_DSS_DATA15_OFFSET 0x0ca
+#define OMAP3_CONTROL_PADCONF_DSS_DATA16_OFFSET 0x0cc
+#define OMAP3_CONTROL_PADCONF_DSS_DATA17_OFFSET 0x0ce
+#define OMAP3_CONTROL_PADCONF_DSS_DATA18_OFFSET 0x0d0
+#define OMAP3_CONTROL_PADCONF_DSS_DATA19_OFFSET 0x0d2
+#define OMAP3_CONTROL_PADCONF_DSS_DATA20_OFFSET 0x0d4
+#define OMAP3_CONTROL_PADCONF_DSS_DATA21_OFFSET 0x0d6
+#define OMAP3_CONTROL_PADCONF_DSS_DATA22_OFFSET 0x0d8
+#define OMAP3_CONTROL_PADCONF_DSS_DATA23_OFFSET 0x0da
+#define OMAP3_CONTROL_PADCONF_CAM_HS_OFFSET 0x0dc
+#define OMAP3_CONTROL_PADCONF_CAM_VS_OFFSET 0x0de
+#define OMAP3_CONTROL_PADCONF_CAM_XCLKA_OFFSET 0x0e0
+#define OMAP3_CONTROL_PADCONF_CAM_PCLK_OFFSET 0x0e2
+#define OMAP3_CONTROL_PADCONF_CAM_FLD_OFFSET 0x0e4
+#define OMAP3_CONTROL_PADCONF_CAM_D0_OFFSET 0x0e6
+#define OMAP3_CONTROL_PADCONF_CAM_D1_OFFSET 0x0e8
+#define OMAP3_CONTROL_PADCONF_CAM_D2_OFFSET 0x0ea
+#define OMAP3_CONTROL_PADCONF_CAM_D3_OFFSET 0x0ec
+#define OMAP3_CONTROL_PADCONF_CAM_D4_OFFSET 0x0ee
+#define OMAP3_CONTROL_PADCONF_CAM_D5_OFFSET 0x0f0
+#define OMAP3_CONTROL_PADCONF_CAM_D6_OFFSET 0x0f2
+#define OMAP3_CONTROL_PADCONF_CAM_D7_OFFSET 0x0f4
+#define OMAP3_CONTROL_PADCONF_CAM_D8_OFFSET 0x0f6
+#define OMAP3_CONTROL_PADCONF_CAM_D9_OFFSET 0x0f8
+#define OMAP3_CONTROL_PADCONF_CAM_D10_OFFSET 0x0fa
+#define OMAP3_CONTROL_PADCONF_CAM_D11_OFFSET 0x0fc
+#define OMAP3_CONTROL_PADCONF_CAM_XCLKB_OFFSET 0x0fe
+#define OMAP3_CONTROL_PADCONF_CAM_WEN_OFFSET 0x100
+#define OMAP3_CONTROL_PADCONF_CAM_STROBE_OFFSET 0x102
+#define OMAP3_CONTROL_PADCONF_CSI2_DX0_OFFSET 0x104
+#define OMAP3_CONTROL_PADCONF_CSI2_DY0_OFFSET 0x106
+#define OMAP3_CONTROL_PADCONF_CSI2_DX1_OFFSET 0x108
+#define OMAP3_CONTROL_PADCONF_CSI2_DY1_OFFSET 0x10a
+#define OMAP3_CONTROL_PADCONF_MCBSP2_FSX_OFFSET 0x10c
+#define OMAP3_CONTROL_PADCONF_MCBSP2_CLKX_OFFSET 0x10e
+#define OMAP3_CONTROL_PADCONF_MCBSP2_DR_OFFSET 0x110
+#define OMAP3_CONTROL_PADCONF_MCBSP2_DX_OFFSET 0x112
+#define OMAP3_CONTROL_PADCONF_SDMMC1_CLK_OFFSET 0x114
+#define OMAP3_CONTROL_PADCONF_SDMMC1_CMD_OFFSET 0x116
+#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT0_OFFSET 0x118
+#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT1_OFFSET 0x11a
+#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT2_OFFSET 0x11c
+#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT3_OFFSET 0x11e
+
+/* SDMMC1_DAT4 - DAT7 are SIM_IO SIM_CLK SIM_PWRCTRL and SIM_RST on 36xx */
+#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT4_OFFSET 0x120
+#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT5_OFFSET 0x122
+#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT6_OFFSET 0x124
+#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT7_OFFSET 0x126
+
+#define OMAP3_CONTROL_PADCONF_SDMMC2_CLK_OFFSET 0x128
+#define OMAP3_CONTROL_PADCONF_SDMMC2_CMD_OFFSET 0x12a
+#define OMAP3_CONTROL_PADCONF_SDMMC2_DAT0_OFFSET 0x12c
+#define OMAP3_CONTROL_PADCONF_SDMMC2_DAT1_OFFSET 0x12e
+#define OMAP3_CONTROL_PADCONF_SDMMC2_DAT2_OFFSET 0x130
+#define OMAP3_CONTROL_PADCONF_SDMMC2_DAT3_OFFSET 0x132
+#define OMAP3_CONTROL_PADCONF_SDMMC2_DAT4_OFFSET 0x134
+#define OMAP3_CONTROL_PADCONF_SDMMC2_DAT5_OFFSET 0x136
+#define OMAP3_CONTROL_PADCONF_SDMMC2_DAT6_OFFSET 0x138
+#define OMAP3_CONTROL_PADCONF_SDMMC2_DAT7_OFFSET 0x13a
+#define OMAP3_CONTROL_PADCONF_MCBSP3_DX_OFFSET 0x13c
+#define OMAP3_CONTROL_PADCONF_MCBSP3_DR_OFFSET 0x13e
+#define OMAP3_CONTROL_PADCONF_MCBSP3_CLKX_OFFSET 0x140
+#define OMAP3_CONTROL_PADCONF_MCBSP3_FSX_OFFSET 0x142
+#define OMAP3_CONTROL_PADCONF_UART2_CTS_OFFSET 0x144
+#define OMAP3_CONTROL_PADCONF_UART2_RTS_OFFSET 0x146
+#define OMAP3_CONTROL_PADCONF_UART2_TX_OFFSET 0x148
+#define OMAP3_CONTROL_PADCONF_UART2_RX_OFFSET 0x14a
+#define OMAP3_CONTROL_PADCONF_UART1_TX_OFFSET 0x14c
+#define OMAP3_CONTROL_PADCONF_UART1_RTS_OFFSET 0x14e
+#define OMAP3_CONTROL_PADCONF_UART1_CTS_OFFSET 0x150
+#define OMAP3_CONTROL_PADCONF_UART1_RX_OFFSET 0x152
+#define OMAP3_CONTROL_PADCONF_MCBSP4_CLKX_OFFSET 0x154
+#define OMAP3_CONTROL_PADCONF_MCBSP4_DR_OFFSET 0x156
+#define OMAP3_CONTROL_PADCONF_MCBSP4_DX_OFFSET 0x158
+#define OMAP3_CONTROL_PADCONF_MCBSP4_FSX_OFFSET 0x15a
+#define OMAP3_CONTROL_PADCONF_MCBSP1_CLKR_OFFSET 0x15c
+#define OMAP3_CONTROL_PADCONF_MCBSP1_FSR_OFFSET 0x15e
+#define OMAP3_CONTROL_PADCONF_MCBSP1_DX_OFFSET 0x160
+#define OMAP3_CONTROL_PADCONF_MCBSP1_DR_OFFSET 0x162
+#define OMAP3_CONTROL_PADCONF_MCBSP_CLKS_OFFSET 0x164
+#define OMAP3_CONTROL_PADCONF_MCBSP1_FSX_OFFSET 0x166
+#define OMAP3_CONTROL_PADCONF_MCBSP1_CLKX_OFFSET 0x168
+#define OMAP3_CONTROL_PADCONF_UART3_CTS_RCTX_OFFSET 0x16a
+#define OMAP3_CONTROL_PADCONF_UART3_RTS_SD_OFFSET 0x16c
+#define OMAP3_CONTROL_PADCONF_UART3_RX_IRRX_OFFSET 0x16e
+#define OMAP3_CONTROL_PADCONF_UART3_TX_IRTX_OFFSET 0x170
+#define OMAP3_CONTROL_PADCONF_HSUSB0_CLK_OFFSET 0x172
+#define OMAP3_CONTROL_PADCONF_HSUSB0_STP_OFFSET 0x174
+#define OMAP3_CONTROL_PADCONF_HSUSB0_DIR_OFFSET 0x176
+#define OMAP3_CONTROL_PADCONF_HSUSB0_NXT_OFFSET 0x178
+#define OMAP3_CONTROL_PADCONF_HSUSB0_DATA0_OFFSET 0x17a
+#define OMAP3_CONTROL_PADCONF_HSUSB0_DATA1_OFFSET 0x17c
+#define OMAP3_CONTROL_PADCONF_HSUSB0_DATA2_OFFSET 0x17e
+#define OMAP3_CONTROL_PADCONF_HSUSB0_DATA3_OFFSET 0x180
+#define OMAP3_CONTROL_PADCONF_HSUSB0_DATA4_OFFSET 0x182
+#define OMAP3_CONTROL_PADCONF_HSUSB0_DATA5_OFFSET 0x184
+#define OMAP3_CONTROL_PADCONF_HSUSB0_DATA6_OFFSET 0x186
+#define OMAP3_CONTROL_PADCONF_HSUSB0_DATA7_OFFSET 0x188
+#define OMAP3_CONTROL_PADCONF_I2C1_SCL_OFFSET 0x18a
+#define OMAP3_CONTROL_PADCONF_I2C1_SDA_OFFSET 0x18c
+#define OMAP3_CONTROL_PADCONF_I2C2_SCL_OFFSET 0x18e
+#define OMAP3_CONTROL_PADCONF_I2C2_SDA_OFFSET 0x190
+#define OMAP3_CONTROL_PADCONF_I2C3_SCL_OFFSET 0x192
+#define OMAP3_CONTROL_PADCONF_I2C3_SDA_OFFSET 0x194
+#define OMAP3_CONTROL_PADCONF_HDQ_SIO_OFFSET 0x196
+#define OMAP3_CONTROL_PADCONF_MCSPI1_CLK_OFFSET 0x198
+#define OMAP3_CONTROL_PADCONF_MCSPI1_SIMO_OFFSET 0x19a
+#define OMAP3_CONTROL_PADCONF_MCSPI1_SOMI_OFFSET 0x19c
+#define OMAP3_CONTROL_PADCONF_MCSPI1_CS0_OFFSET 0x19e
+#define OMAP3_CONTROL_PADCONF_MCSPI1_CS1_OFFSET 0x1a0
+#define OMAP3_CONTROL_PADCONF_MCSPI1_CS2_OFFSET 0x1a2
+#define OMAP3_CONTROL_PADCONF_MCSPI1_CS3_OFFSET 0x1a4
+#define OMAP3_CONTROL_PADCONF_MCSPI2_CLK_OFFSET 0x1a6
+#define OMAP3_CONTROL_PADCONF_MCSPI2_SIMO_OFFSET 0x1a8
+#define OMAP3_CONTROL_PADCONF_MCSPI2_SOMI_OFFSET 0x1aa
+#define OMAP3_CONTROL_PADCONF_MCSPI2_CS0_OFFSET 0x1ac
+#define OMAP3_CONTROL_PADCONF_MCSPI2_CS1_OFFSET 0x1ae
+#define OMAP3_CONTROL_PADCONF_SYS_NIRQ_OFFSET 0x1b0
+#define OMAP3_CONTROL_PADCONF_SYS_CLKOUT2_OFFSET 0x1b2
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD0_OFFSET 0x1b4
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD1_OFFSET 0x1b6
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD2_OFFSET 0x1b8
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD3_OFFSET 0x1ba
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD4_OFFSET 0x1bc
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD5_OFFSET 0x1be
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD6_OFFSET 0x1c0
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD7_OFFSET 0x1c2
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD8_OFFSET 0x1c4
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD9_OFFSET 0x1c6
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD10_OFFSET 0x1c8
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD11_OFFSET 0x1ca
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD12_OFFSET 0x1cc
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD13_OFFSET 0x1ce
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD14_OFFSET 0x1d0
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD15_OFFSET 0x1d2
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD16_OFFSET 0x1d4
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD17_OFFSET 0x1d6
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD18_OFFSET 0x1d8
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD19_OFFSET 0x1da
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD20_OFFSET 0x1dc
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD21_OFFSET 0x1de
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD22_OFFSET 0x1e0
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD23_OFFSET 0x1e2
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD24_OFFSET 0x1e4
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD25_OFFSET 0x1e6
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD26_OFFSET 0x1e8
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD27_OFFSET 0x1ea
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD28_OFFSET 0x1ec
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD29_OFFSET 0x1ee
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD30_OFFSET 0x1f0
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD31_OFFSET 0x1f2
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD32_OFFSET 0x1f4
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD33_OFFSET 0x1f6
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD34_OFFSET 0x1f8
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD35_OFFSET 0x1fa
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD36_OFFSET 0x1fc
+
+/* Note that 34xx TRM has SAD2D instead of CHASSIS for these */
+#define OMAP3_CONTROL_PADCONF_CHASSIS_CLK26MI_OFFSET 0x1fe
+#define OMAP3_CONTROL_PADCONF_CHASSIS_NRESPWRON_OFFSET 0x200
+#define OMAP3_CONTROL_PADCONF_CHASSIS_NRESWARW_OFFSET 0x202
+#define OMAP3_CONTROL_PADCONF_CHASSIS_NIRQ_OFFSET 0x204
+#define OMAP3_CONTROL_PADCONF_CHASSIS_FIQ_OFFSET 0x206
+#define OMAP3_CONTROL_PADCONF_CHASSIS_ARMIRQ_OFFSET 0x208
+#define OMAP3_CONTROL_PADCONF_CHASSIS_IVAIRQ_OFFSET 0x20a
+#define OMAP3_CONTROL_PADCONF_CHASSIS_DMAREQ0_OFFSET 0x20c
+#define OMAP3_CONTROL_PADCONF_CHASSIS_DMAREQ1_OFFSET 0x20e
+#define OMAP3_CONTROL_PADCONF_CHASSIS_DMAREQ2_OFFSET 0x210
+#define OMAP3_CONTROL_PADCONF_CHASSIS_DMAREQ3_OFFSET 0x212
+#define OMAP3_CONTROL_PADCONF_CHASSIS_NTRST_OFFSET 0x214
+#define OMAP3_CONTROL_PADCONF_CHASSIS_TDI_OFFSET 0x216
+#define OMAP3_CONTROL_PADCONF_CHASSIS_TDO_OFFSET 0x218
+#define OMAP3_CONTROL_PADCONF_CHASSIS_TMS_OFFSET 0x21a
+#define OMAP3_CONTROL_PADCONF_CHASSIS_TCK_OFFSET 0x21c
+#define OMAP3_CONTROL_PADCONF_CHASSIS_RTCK_OFFSET 0x21e
+#define OMAP3_CONTROL_PADCONF_CHASSIS_MSTDBY_OFFSET 0x220
+#define OMAP3_CONTROL_PADCONF_CHASSIS_IDLEREQ_OFFSET 0x222
+#define OMAP3_CONTROL_PADCONF_CHASSIS_IDLEACK_OFFSET 0x224
+
+#define OMAP3_CONTROL_PADCONF_SAD2D_MWRITE_OFFSET 0x226
+#define OMAP3_CONTROL_PADCONF_SAD2D_SWRITE_OFFSET 0x228
+#define OMAP3_CONTROL_PADCONF_SAD2D_MREAD_OFFSET 0x22a
+#define OMAP3_CONTROL_PADCONF_SAD2D_SREAD_OFFSET 0x22c
+#define OMAP3_CONTROL_PADCONF_SAD2D_MBUSFLAG_OFFSET 0x22e
+#define OMAP3_CONTROL_PADCONF_SAD2D_SBUSFLAG_OFFSET 0x230
+#define OMAP3_CONTROL_PADCONF_SDRC_CKE0_OFFSET 0x232
+#define OMAP3_CONTROL_PADCONF_SDRC_CKE1_OFFSET 0x234
+
+/* 36xx only */
+#define OMAP3_CONTROL_PADCONF_GPMC_A11_OFFSET 0x236
+#define OMAP3_CONTROL_PADCONF_SDRC_BA0_OFFSET 0x570
+#define OMAP3_CONTROL_PADCONF_SDRC_BA1_OFFSET 0x572
+#define OMAP3_CONTROL_PADCONF_SDRC_A0_OFFSET 0x574
+#define OMAP3_CONTROL_PADCONF_SDRC_A1_OFFSET 0x576
+#define OMAP3_CONTROL_PADCONF_SDRC_A2_OFFSET 0x578
+#define OMAP3_CONTROL_PADCONF_SDRC_A3_OFFSET 0x57a
+#define OMAP3_CONTROL_PADCONF_SDRC_A4_OFFSET 0x57c
+#define OMAP3_CONTROL_PADCONF_SDRC_A5_OFFSET 0x57e
+#define OMAP3_CONTROL_PADCONF_SDRC_A6_OFFSET 0x580
+#define OMAP3_CONTROL_PADCONF_SDRC_A7_OFFSET 0x582
+#define OMAP3_CONTROL_PADCONF_SDRC_A8_OFFSET 0x584
+#define OMAP3_CONTROL_PADCONF_SDRC_A9_OFFSET 0x586
+#define OMAP3_CONTROL_PADCONF_SDRC_A10_OFFSET 0x588
+#define OMAP3_CONTROL_PADCONF_SDRC_A11_OFFSET 0x58a
+#define OMAP3_CONTROL_PADCONF_SDRC_A12_OFFSET 0x58c
+#define OMAP3_CONTROL_PADCONF_SDRC_A13_OFFSET 0x58e
+#define OMAP3_CONTROL_PADCONF_SDRC_A14_OFFSET 0x590
+#define OMAP3_CONTROL_PADCONF_SDRC_NCS0_OFFSET 0x592
+#define OMAP3_CONTROL_PADCONF_SDRC_NCS1_OFFSET 0x594
+#define OMAP3_CONTROL_PADCONF_SDRC_NCLK_OFFSET 0x596
+#define OMAP3_CONTROL_PADCONF_SDRC_NRAS_OFFSET 0x598
+#define OMAP3_CONTROL_PADCONF_SDRC_NCAS_OFFSET 0x59a
+#define OMAP3_CONTROL_PADCONF_SDRC_NWE_OFFSET 0x59c
+#define OMAP3_CONTROL_PADCONF_SDRC_DM0_OFFSET 0x59e
+#define OMAP3_CONTROL_PADCONF_SDRC_DM1_OFFSET 0x5a0
+#define OMAP3_CONTROL_PADCONF_SDRC_DM2_OFFSET 0x5a2
+#define OMAP3_CONTROL_PADCONF_SDRC_DM3_OFFSET 0x5a4
+
+/* 36xx only, these are SDMMC1_DAT4 - DAT7 on 34xx */
+#define OMAP3_CONTROL_PADCONF_SIM_IO_OFFSET 0x120
+#define OMAP3_CONTROL_PADCONF_SIM_CLK_OFFSET 0x122
+#define OMAP3_CONTROL_PADCONF_SIM_PWRCTRL_OFFSET 0x124
+#define OMAP3_CONTROL_PADCONF_SIM_RST_OFFSET 0x126
+
+#define OMAP3_CONTROL_PADCONF_ETK_CLK_OFFSET 0x5a8
+#define OMAP3_CONTROL_PADCONF_ETK_CTL_OFFSET 0x5aa
+#define OMAP3_CONTROL_PADCONF_ETK_D0_OFFSET 0x5ac
+#define OMAP3_CONTROL_PADCONF_ETK_D1_OFFSET 0x5ae
+#define OMAP3_CONTROL_PADCONF_ETK_D2_OFFSET 0x5b0
+#define OMAP3_CONTROL_PADCONF_ETK_D3_OFFSET 0x5b2
+#define OMAP3_CONTROL_PADCONF_ETK_D4_OFFSET 0x5b4
+#define OMAP3_CONTROL_PADCONF_ETK_D5_OFFSET 0x5b6
+#define OMAP3_CONTROL_PADCONF_ETK_D6_OFFSET 0x5b8
+#define OMAP3_CONTROL_PADCONF_ETK_D7_OFFSET 0x5ba
+#define OMAP3_CONTROL_PADCONF_ETK_D8_OFFSET 0x5bc
+#define OMAP3_CONTROL_PADCONF_ETK_D9_OFFSET 0x5be
+#define OMAP3_CONTROL_PADCONF_ETK_D10_OFFSET 0x5c0
+#define OMAP3_CONTROL_PADCONF_ETK_D11_OFFSET 0x5c2
+#define OMAP3_CONTROL_PADCONF_ETK_D12_OFFSET 0x5c4
+#define OMAP3_CONTROL_PADCONF_ETK_D13_OFFSET 0x5c6
+#define OMAP3_CONTROL_PADCONF_ETK_D14_OFFSET 0x5c8
+#define OMAP3_CONTROL_PADCONF_ETK_D15_OFFSET 0x5ca
+#define OMAP3_CONTROL_PADCONF_I2C4_SCL_OFFSET 0x9d0
+#define OMAP3_CONTROL_PADCONF_I2C4_SDA_OFFSET 0x9d2
+#define OMAP3_CONTROL_PADCONF_SYS_32K_OFFSET 0x9d4
+#define OMAP3_CONTROL_PADCONF_SYS_CLKREQ_OFFSET 0x9d6
+#define OMAP3_CONTROL_PADCONF_SYS_NRESWARM_OFFSET 0x9d8
+#define OMAP3_CONTROL_PADCONF_SYS_BOOT0_OFFSET 0x9da
+#define OMAP3_CONTROL_PADCONF_SYS_BOOT1_OFFSET 0x9dc
+#define OMAP3_CONTROL_PADCONF_SYS_BOOT2_OFFSET 0x9de
+#define OMAP3_CONTROL_PADCONF_SYS_BOOT3_OFFSET 0x9e0
+#define OMAP3_CONTROL_PADCONF_SYS_BOOT4_OFFSET 0x9e2
+#define OMAP3_CONTROL_PADCONF_SYS_BOOT5_OFFSET 0x9e4
+#define OMAP3_CONTROL_PADCONF_SYS_BOOT6_OFFSET 0x9e6
+#define OMAP3_CONTROL_PADCONF_SYS_OFF_MODE_OFFSET 0x9e8
+#define OMAP3_CONTROL_PADCONF_SYS_CLKOUT1_OFFSET 0x9ea
+#define OMAP3_CONTROL_PADCONF_JTAG_NTRST_OFFSET 0x9ec
+#define OMAP3_CONTROL_PADCONF_JTAG_TCK_OFFSET 0x9ee
+#define OMAP3_CONTROL_PADCONF_JTAG_TMS_TMSC_OFFSET 0x9f0
+#define OMAP3_CONTROL_PADCONF_JTAG_TDI_OFFSET 0x9f2
+#define OMAP3_CONTROL_PADCONF_JTAG_EMU0_OFFSET 0x9f4
+#define OMAP3_CONTROL_PADCONF_JTAG_EMU1_OFFSET 0x9f6
+#define OMAP3_CONTROL_PADCONF_SAD2D_SWAKEUP_OFFSET 0xa1c
+#define OMAP3_CONTROL_PADCONF_JTAG_RTCK_OFFSET 0xa1e
+#define OMAP3_CONTROL_PADCONF_JTAG_TDO_OFFSET 0xa20
+
+#define OMAP3_CONTROL_PADCONF_MUX_SIZE \
+ (OMAP3_CONTROL_PADCONF_JTAG_TDO_OFFSET + 0x2)
diff --git a/arch/arm/mach-omap2/omap-headsmp.S b/arch/arm/mach-omap2/omap-headsmp.S
index 4afadba..aa3f65c 100644
--- a/arch/arm/mach-omap2/omap-headsmp.S
+++ b/arch/arm/mach-omap2/omap-headsmp.S
@@ -27,20 +27,39 @@
* OMAP4 specific entry point for secondary CPU to jump from ROM
* code. This routine also provides a holding flag into which
* secondary core is held until we're ready for it to initialise.
- * The primary core will update the this flag using a hardware
- * register AuxCoreBoot1.
+ * The primary core will update this flag using a hardware
+ * register AuxCoreBoot0.
*/
ENTRY(omap_secondary_startup)
- mrc p15, 0, r0, c0, c0, 5
- and r0, r0, #0x0f
-hold: ldr r1, =OMAP4_AUX_CORE_BOOT1_PA @ read from AuxCoreBoot1
- ldr r2, [r1]
- cmp r2, r0
+hold: ldr r12,=0x103
+ dsb
+ smc @ read from AuxCoreBoot0
+ mov r0, r0, lsr #9
+ mrc p15, 0, r4, c0, c0, 5
+ and r4, r4, #0x0f
+ cmp r0, r4
bne hold
/*
- * we've been released from the cpu_release,secondary_stack
+ * we've been released from the wait loop,secondary_stack
* should now contain the SVC stack for this core
*/
b secondary_startup
+END(omap_secondary_startup)
+
+ENTRY(omap_modify_auxcoreboot0)
+ stmfd sp!, {r1-r12, lr}
+ ldr r12, =0x104
+ dsb
+ smc
+ ldmfd sp!, {r1-r12, pc}
+END(omap_modify_auxcoreboot0)
+
+ENTRY(omap_auxcoreboot_addr)
+ stmfd sp!, {r2-r12, lr}
+ ldr r12, =0x105
+ dsb
+ smc
+ ldmfd sp!, {r2-r12, pc}
+END(omap_auxcoreboot_addr)
diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c
index 4890bcf..38153e5 100644
--- a/arch/arm/mach-omap2/omap-smp.c
+++ b/arch/arm/mach-omap2/omap-smp.c
@@ -17,19 +17,15 @@
*/
#include <linux/init.h>
#include <linux/device.h>
-#include <linux/jiffies.h>
#include <linux/smp.h>
#include <linux/io.h>
+#include <asm/cacheflush.h>
#include <asm/localtimer.h>
#include <asm/smp_scu.h>
#include <mach/hardware.h>
#include <plat/common.h>
-/* Registers used for communicating startup information */
-static void __iomem *omap4_auxcoreboot_reg0;
-static void __iomem *omap4_auxcoreboot_reg1;
-
/* SCU base address */
static void __iomem *scu_base;
@@ -65,8 +61,6 @@
int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
{
- unsigned long timeout;
-
/*
* Set synchronisation state between this boot processor
* and the secondary one
@@ -74,18 +68,15 @@
spin_lock(&boot_lock);
/*
- * Update the AuxCoreBoot1 with boot state for secondary core.
+ * Update the AuxCoreBoot0 with boot state for secondary core.
* omap_secondary_startup() routine will hold the secondary core till
* the AuxCoreBoot1 register is updated with cpu state
* A barrier is added to ensure that write buffer is drained
*/
- __raw_writel(cpu, omap4_auxcoreboot_reg1);
+ omap_modify_auxcoreboot0(0x200, 0x0);
+ flush_cache_all();
smp_wmb();
- timeout = jiffies + (1 * HZ);
- while (time_before(jiffies, timeout))
- ;
-
/*
* Now the secondary core is starting up let it run its
* calibrations, then wait for it to finish
@@ -99,17 +90,18 @@
{
/*
* Write the address of secondary startup routine into the
- * AuxCoreBoot0 where ROM code will jump and start executing
+ * AuxCoreBoot1 where ROM code will jump and start executing
* on secondary core once out of WFE
* A barrier is added to ensure that write buffer is drained
*/
- __raw_writel(virt_to_phys(omap_secondary_startup), \
- omap4_auxcoreboot_reg0);
+ omap_auxcoreboot_addr(virt_to_phys(omap_secondary_startup));
smp_wmb();
/*
* Send a 'sev' to wake the secondary core from WFE.
+ * Drain the outstanding writes to memory
*/
+ dsb();
set_event();
mb();
}
@@ -136,7 +128,6 @@
{
unsigned int ncores = get_core_count();
unsigned int cpu = smp_processor_id();
- void __iomem *omap4_wkupgen_base;
int i;
/* sanity check */
@@ -168,12 +159,6 @@
for (i = 0; i < max_cpus; i++)
set_cpu_present(i, true);
- /* Never released */
- omap4_wkupgen_base = ioremap(OMAP44XX_WKUPGEN_BASE, SZ_4K);
- BUG_ON(!omap4_wkupgen_base);
- omap4_auxcoreboot_reg0 = omap4_wkupgen_base + 0x800;
- omap4_auxcoreboot_reg1 = omap4_wkupgen_base + 0x804;
-
if (max_cpus > 1) {
/*
* Enable the local timer or broadcast device for the
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index 2e17b57..39b797b 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -33,6 +33,7 @@
#include "pm.h"
#include "prm-regbits-34xx.h"
+#define UART_OMAP_NO_EMPTY_FIFO_READ_IP_REV 0x52
#define UART_OMAP_WER 0x17 /* Wake-up enable register */
#define DEFAULT_TIMEOUT (5 * HZ)
@@ -572,6 +573,23 @@
#endif
};
+/*
+ * Override the default 8250 read handler: mem_serial_in()
+ * Empty RX fifo read causes an abort on omap3630 and omap4
+ * This function makes sure that an empty rx fifo is not read on these silicons
+ * (OMAP1/2/3430 are not affected)
+ */
+static unsigned int serial_in_override(struct uart_port *up, int offset)
+{
+ if (UART_RX == offset) {
+ unsigned int lsr;
+ lsr = serial_read_reg(omap_uart[up->line].p, UART_LSR);
+ if (!(lsr & UART_LSR_DR))
+ return -EPERM;
+ }
+ return serial_read_reg(omap_uart[up->line].p, offset);
+}
+
void __init omap_serial_early_init(void)
{
int i;
@@ -631,24 +649,64 @@
}
}
+/**
+ * omap_serial_init_port() - initialize single serial port
+ * @port: serial port number (0-3)
+ *
+ * This function initialies serial driver for given @port only.
+ * Platforms can call this function instead of omap_serial_init()
+ * if they don't plan to use all available UARTs as serial ports.
+ *
+ * Don't mix calls to omap_serial_init_port() and omap_serial_init(),
+ * use only one of the two.
+ */
+void __init omap_serial_init_port(int port)
+{
+ struct omap_uart_state *uart;
+ struct platform_device *pdev;
+ struct device *dev;
+
+ BUG_ON(port < 0);
+ BUG_ON(port >= ARRAY_SIZE(omap_uart));
+
+ uart = &omap_uart[port];
+ pdev = &uart->pdev;
+ dev = &pdev->dev;
+
+ omap_uart_reset(uart);
+ omap_uart_idle_init(uart);
+
+ if (WARN_ON(platform_device_register(pdev)))
+ return;
+
+ if ((cpu_is_omap34xx() && uart->padconf) ||
+ (uart->wk_en && uart->wk_mask)) {
+ device_init_wakeup(dev, true);
+ DEV_CREATE_FILE(dev, &dev_attr_sleep_timeout);
+ }
+
+ /* omap44xx: Never read empty UART fifo
+ * omap3xxx: Never read empty UART fifo on UARTs
+ * with IP rev >=0x52
+ */
+ if (cpu_is_omap44xx())
+ uart->p->serial_in = serial_in_override;
+ else if ((serial_read_reg(uart->p, UART_OMAP_MVER) & 0xFF)
+ >= UART_OMAP_NO_EMPTY_FIFO_READ_IP_REV)
+ uart->p->serial_in = serial_in_override;
+}
+
+/**
+ * omap_serial_init() - intialize all supported serial ports
+ *
+ * Initializes all available UARTs as serial ports. Platforms
+ * can call this function when they want to have default behaviour
+ * for serial ports (e.g initialize them all as serial ports).
+ */
void __init omap_serial_init(void)
{
int i;
- for (i = 0; i < ARRAY_SIZE(omap_uart); i++) {
- struct omap_uart_state *uart = &omap_uart[i];
- struct platform_device *pdev = &uart->pdev;
- struct device *dev = &pdev->dev;
-
- omap_uart_reset(uart);
- omap_uart_idle_init(uart);
-
- if (WARN_ON(platform_device_register(pdev)))
- continue;
- if ((cpu_is_omap34xx() && uart->padconf) ||
- (uart->wk_en && uart->wk_mask)) {
- device_init_wakeup(dev, true);
- DEV_CREATE_FILE(dev, &dev_attr_sleep_timeout);
- }
- }
+ for (i = 0; i < ARRAY_SIZE(omap_uart); i++)
+ omap_serial_init_port(i);
}
diff --git a/arch/arm/mach-omap2/usb-ehci.c b/arch/arm/mach-omap2/usb-ehci.c
index e448abd..f1df873 100644
--- a/arch/arm/mach-omap2/usb-ehci.c
+++ b/arch/arm/mach-omap2/usb-ehci.c
@@ -27,6 +27,8 @@
#include <mach/irqs.h>
#include <plat/usb.h>
+#include "mux.h"
+
#if defined(CONFIG_USB_EHCI_HCD) || defined(CONFIG_USB_EHCI_HCD_MODULE)
static struct resource ehci_resources[] = {
@@ -72,32 +74,44 @@
{
switch (port_mode[0]) {
case EHCI_HCD_OMAP_MODE_PHY:
- omap_cfg_reg(Y9_3430_USB1HS_PHY_STP);
- omap_cfg_reg(Y8_3430_USB1HS_PHY_CLK);
- omap_cfg_reg(AA14_3430_USB1HS_PHY_DIR);
- omap_cfg_reg(AA11_3430_USB1HS_PHY_NXT);
- omap_cfg_reg(W13_3430_USB1HS_PHY_DATA0);
- omap_cfg_reg(W12_3430_USB1HS_PHY_DATA1);
- omap_cfg_reg(W11_3430_USB1HS_PHY_DATA2);
- omap_cfg_reg(Y11_3430_USB1HS_PHY_DATA3);
- omap_cfg_reg(W9_3430_USB1HS_PHY_DATA4);
- omap_cfg_reg(Y12_3430_USB1HS_PHY_DATA5);
- omap_cfg_reg(W8_3430_USB1HS_PHY_DATA6);
- omap_cfg_reg(Y13_3430_USB1HS_PHY_DATA7);
+ omap_mux_init_signal("hsusb1_stp", OMAP_PIN_OUTPUT);
+ omap_mux_init_signal("hsusb1_clk", OMAP_PIN_OUTPUT);
+ omap_mux_init_signal("hsusb1_dir", OMAP_PIN_INPUT_PULLDOWN);
+ omap_mux_init_signal("hsusb1_nxt", OMAP_PIN_INPUT_PULLDOWN);
+ omap_mux_init_signal("hsusb1_data0", OMAP_PIN_INPUT_PULLDOWN);
+ omap_mux_init_signal("hsusb1_data1", OMAP_PIN_INPUT_PULLDOWN);
+ omap_mux_init_signal("hsusb1_data2", OMAP_PIN_INPUT_PULLDOWN);
+ omap_mux_init_signal("hsusb1_data3", OMAP_PIN_INPUT_PULLDOWN);
+ omap_mux_init_signal("hsusb1_data4", OMAP_PIN_INPUT_PULLDOWN);
+ omap_mux_init_signal("hsusb1_data5", OMAP_PIN_INPUT_PULLDOWN);
+ omap_mux_init_signal("hsusb1_data6", OMAP_PIN_INPUT_PULLDOWN);
+ omap_mux_init_signal("hsusb1_data7", OMAP_PIN_INPUT_PULLDOWN);
break;
case EHCI_HCD_OMAP_MODE_TLL:
- omap_cfg_reg(Y9_3430_USB1HS_TLL_STP);
- omap_cfg_reg(Y8_3430_USB1HS_TLL_CLK);
- omap_cfg_reg(AA14_3430_USB1HS_TLL_DIR);
- omap_cfg_reg(AA11_3430_USB1HS_TLL_NXT);
- omap_cfg_reg(W13_3430_USB1HS_TLL_DATA0);
- omap_cfg_reg(W12_3430_USB1HS_TLL_DATA1);
- omap_cfg_reg(W11_3430_USB1HS_TLL_DATA2);
- omap_cfg_reg(Y11_3430_USB1HS_TLL_DATA3);
- omap_cfg_reg(W9_3430_USB1HS_TLL_DATA4);
- omap_cfg_reg(Y12_3430_USB1HS_TLL_DATA5);
- omap_cfg_reg(W8_3430_USB1HS_TLL_DATA6);
- omap_cfg_reg(Y13_3430_USB1HS_TLL_DATA7);
+ omap_mux_init_signal("hsusb1_tll_stp",
+ OMAP_PIN_INPUT_PULLUP);
+ omap_mux_init_signal("hsusb1_tll_clk",
+ OMAP_PIN_INPUT_PULLDOWN);
+ omap_mux_init_signal("hsusb1_tll_dir",
+ OMAP_PIN_INPUT_PULLDOWN);
+ omap_mux_init_signal("hsusb1_tll_nxt",
+ OMAP_PIN_INPUT_PULLDOWN);
+ omap_mux_init_signal("hsusb1_tll_data0",
+ OMAP_PIN_INPUT_PULLDOWN);
+ omap_mux_init_signal("hsusb1_tll_data1",
+ OMAP_PIN_INPUT_PULLDOWN);
+ omap_mux_init_signal("hsusb1_tll_data2",
+ OMAP_PIN_INPUT_PULLDOWN);
+ omap_mux_init_signal("hsusb1_tll_data3",
+ OMAP_PIN_INPUT_PULLDOWN);
+ omap_mux_init_signal("hsusb1_tll_data4",
+ OMAP_PIN_INPUT_PULLDOWN);
+ omap_mux_init_signal("hsusb1_tll_data5",
+ OMAP_PIN_INPUT_PULLDOWN);
+ omap_mux_init_signal("hsusb1_tll_data6",
+ OMAP_PIN_INPUT_PULLDOWN);
+ omap_mux_init_signal("hsusb1_tll_data7",
+ OMAP_PIN_INPUT_PULLDOWN);
break;
case EHCI_HCD_OMAP_MODE_UNKNOWN:
/* FALLTHROUGH */
@@ -107,32 +121,52 @@
switch (port_mode[1]) {
case EHCI_HCD_OMAP_MODE_PHY:
- omap_cfg_reg(AA10_3430_USB2HS_PHY_STP);
- omap_cfg_reg(AA8_3430_USB2HS_PHY_CLK);
- omap_cfg_reg(AA9_3430_USB2HS_PHY_DIR);
- omap_cfg_reg(AB11_3430_USB2HS_PHY_NXT);
- omap_cfg_reg(AB10_3430_USB2HS_PHY_DATA0);
- omap_cfg_reg(AB9_3430_USB2HS_PHY_DATA1);
- omap_cfg_reg(W3_3430_USB2HS_PHY_DATA2);
- omap_cfg_reg(T4_3430_USB2HS_PHY_DATA3);
- omap_cfg_reg(T3_3430_USB2HS_PHY_DATA4);
- omap_cfg_reg(R3_3430_USB2HS_PHY_DATA5);
- omap_cfg_reg(R4_3430_USB2HS_PHY_DATA6);
- omap_cfg_reg(T2_3430_USB2HS_PHY_DATA7);
+ omap_mux_init_signal("hsusb2_stp", OMAP_PIN_OUTPUT);
+ omap_mux_init_signal("hsusb2_clk", OMAP_PIN_OUTPUT);
+ omap_mux_init_signal("hsusb2_dir", OMAP_PIN_INPUT_PULLDOWN);
+ omap_mux_init_signal("hsusb2_nxt", OMAP_PIN_INPUT_PULLDOWN);
+ omap_mux_init_signal("hsusb2_data0",
+ OMAP_PIN_INPUT_PULLDOWN);
+ omap_mux_init_signal("hsusb2_data1",
+ OMAP_PIN_INPUT_PULLDOWN);
+ omap_mux_init_signal("hsusb2_data2",
+ OMAP_PIN_INPUT_PULLDOWN);
+ omap_mux_init_signal("hsusb2_data3",
+ OMAP_PIN_INPUT_PULLDOWN);
+ omap_mux_init_signal("hsusb2_data4",
+ OMAP_PIN_INPUT_PULLDOWN);
+ omap_mux_init_signal("hsusb2_data5",
+ OMAP_PIN_INPUT_PULLDOWN);
+ omap_mux_init_signal("hsusb2_data6",
+ OMAP_PIN_INPUT_PULLDOWN);
+ omap_mux_init_signal("hsusb2_data7",
+ OMAP_PIN_INPUT_PULLDOWN);
break;
case EHCI_HCD_OMAP_MODE_TLL:
- omap_cfg_reg(AA10_3430_USB2HS_TLL_STP);
- omap_cfg_reg(AA8_3430_USB2HS_TLL_CLK);
- omap_cfg_reg(AA9_3430_USB2HS_TLL_DIR);
- omap_cfg_reg(AB11_3430_USB2HS_TLL_NXT);
- omap_cfg_reg(AB10_3430_USB2HS_TLL_DATA0);
- omap_cfg_reg(AB9_3430_USB2HS_TLL_DATA1);
- omap_cfg_reg(W3_3430_USB2HS_TLL_DATA2);
- omap_cfg_reg(T4_3430_USB2HS_TLL_DATA3);
- omap_cfg_reg(T3_3430_USB2HS_TLL_DATA4);
- omap_cfg_reg(R3_3430_USB2HS_TLL_DATA5);
- omap_cfg_reg(R4_3430_USB2HS_TLL_DATA6);
- omap_cfg_reg(T2_3430_USB2HS_TLL_DATA7);
+ omap_mux_init_signal("hsusb2_tll_stp",
+ OMAP_PIN_INPUT_PULLUP);
+ omap_mux_init_signal("hsusb2_tll_clk",
+ OMAP_PIN_INPUT_PULLDOWN);
+ omap_mux_init_signal("hsusb2_tll_dir",
+ OMAP_PIN_INPUT_PULLDOWN);
+ omap_mux_init_signal("hsusb2_tll_nxt",
+ OMAP_PIN_INPUT_PULLDOWN);
+ omap_mux_init_signal("hsusb2_tll_data0",
+ OMAP_PIN_INPUT_PULLDOWN);
+ omap_mux_init_signal("hsusb2_tll_data1",
+ OMAP_PIN_INPUT_PULLDOWN);
+ omap_mux_init_signal("hsusb2_tll_data2",
+ OMAP_PIN_INPUT_PULLDOWN);
+ omap_mux_init_signal("hsusb2_tll_data3",
+ OMAP_PIN_INPUT_PULLDOWN);
+ omap_mux_init_signal("hsusb2_tll_data4",
+ OMAP_PIN_INPUT_PULLDOWN);
+ omap_mux_init_signal("hsusb2_tll_data5",
+ OMAP_PIN_INPUT_PULLDOWN);
+ omap_mux_init_signal("hsusb2_tll_data6",
+ OMAP_PIN_INPUT_PULLDOWN);
+ omap_mux_init_signal("hsusb2_tll_data7",
+ OMAP_PIN_INPUT_PULLDOWN);
break;
case EHCI_HCD_OMAP_MODE_UNKNOWN:
/* FALLTHROUGH */
@@ -145,18 +179,30 @@
printk(KERN_WARNING "Port3 can't be used in PHY mode\n");
break;
case EHCI_HCD_OMAP_MODE_TLL:
- omap_cfg_reg(AB3_3430_USB3HS_TLL_STP);
- omap_cfg_reg(AA6_3430_USB3HS_TLL_CLK);
- omap_cfg_reg(AA3_3430_USB3HS_TLL_DIR);
- omap_cfg_reg(Y3_3430_USB3HS_TLL_NXT);
- omap_cfg_reg(AA5_3430_USB3HS_TLL_DATA0);
- omap_cfg_reg(Y4_3430_USB3HS_TLL_DATA1);
- omap_cfg_reg(Y5_3430_USB3HS_TLL_DATA2);
- omap_cfg_reg(W5_3430_USB3HS_TLL_DATA3);
- omap_cfg_reg(AB12_3430_USB3HS_TLL_DATA4);
- omap_cfg_reg(AB13_3430_USB3HS_TLL_DATA5);
- omap_cfg_reg(AA13_3430_USB3HS_TLL_DATA6);
- omap_cfg_reg(AA12_3430_USB3HS_TLL_DATA7);
+ omap_mux_init_signal("hsusb3_tll_stp",
+ OMAP_PIN_INPUT_PULLUP);
+ omap_mux_init_signal("hsusb3_tll_clk",
+ OMAP_PIN_INPUT_PULLDOWN);
+ omap_mux_init_signal("hsusb3_tll_dir",
+ OMAP_PIN_INPUT_PULLDOWN);
+ omap_mux_init_signal("hsusb3_tll_nxt",
+ OMAP_PIN_INPUT_PULLDOWN);
+ omap_mux_init_signal("hsusb3_tll_data0",
+ OMAP_PIN_INPUT_PULLDOWN);
+ omap_mux_init_signal("hsusb3_tll_data1",
+ OMAP_PIN_INPUT_PULLDOWN);
+ omap_mux_init_signal("hsusb3_tll_data2",
+ OMAP_PIN_INPUT_PULLDOWN);
+ omap_mux_init_signal("hsusb3_tll_data3",
+ OMAP_PIN_INPUT_PULLDOWN);
+ omap_mux_init_signal("hsusb3_tll_data4",
+ OMAP_PIN_INPUT_PULLDOWN);
+ omap_mux_init_signal("hsusb3_tll_data5",
+ OMAP_PIN_INPUT_PULLDOWN);
+ omap_mux_init_signal("hsusb3_tll_data6",
+ OMAP_PIN_INPUT_PULLDOWN);
+ omap_mux_init_signal("hsusb3_tll_data7",
+ OMAP_PIN_INPUT_PULLDOWN);
break;
case EHCI_HCD_OMAP_MODE_UNKNOWN:
/* FALLTHROUGH */
diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c
index 01ab1e5..bf1eaf3 100644
--- a/arch/arm/plat-omap/common.c
+++ b/arch/arm/plat-omap/common.c
@@ -280,7 +280,7 @@
#if defined(CONFIG_ARCH_OMAP4)
static struct omap_globals omap4_globals = {
.class = OMAP443X_CLASS,
- .tap = OMAP2_L4_IO_ADDRESS(0x4830a000),
+ .tap = OMAP2_L4_IO_ADDRESS(OMAP443X_SCM_BASE),
.ctrl = OMAP2_L4_IO_ADDRESS(OMAP443X_CTRL_BASE),
.prm = OMAP2_L4_IO_ADDRESS(OMAP4430_PRM_BASE),
.cm = OMAP2_L4_IO_ADDRESS(OMAP4430_CM_BASE),
diff --git a/arch/arm/plat-omap/debug-devices.c b/arch/arm/plat-omap/debug-devices.c
index 09c1107..923c962 100644
--- a/arch/arm/plat-omap/debug-devices.c
+++ b/arch/arm/plat-omap/debug-devices.c
@@ -13,6 +13,7 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/io.h>
+#include <linux/smc91x.h>
#include <mach/hardware.h>
@@ -24,6 +25,12 @@
* platforms include H2, H3, H4, and Perseus2.
*/
+static struct smc91x_platdata smc91x_info = {
+ .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+ .leda = RPC_LED_100_10,
+ .ledb = RPC_LED_TX_RX,
+};
+
static struct resource smc91x_resources[] = {
[0] = {
.flags = IORESOURCE_MEM,
@@ -36,6 +43,9 @@
static struct platform_device smc91x_device = {
.name = "smc91x",
.id = -1,
+ .dev = {
+ .platform_data = &smc91x_info,
+ },
.num_resources = ARRAY_SIZE(smc91x_resources),
.resource = smc91x_resources,
};
diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c
index f866178..30b5db7 100644
--- a/arch/arm/plat-omap/devices.c
+++ b/arch/arm/plat-omap/devices.c
@@ -242,6 +242,39 @@
/*-------------------------------------------------------------------------*/
+#if defined(CONFIG_HW_RANDOM_OMAP) || defined(CONFIG_HW_RANDOM_OMAP_MODULE)
+
+#ifdef CONFIG_ARCH_OMAP24XX
+#define OMAP_RNG_BASE 0x480A0000
+#else
+#define OMAP_RNG_BASE 0xfffe5000
+#endif
+
+static struct resource rng_resources[] = {
+ {
+ .start = OMAP_RNG_BASE,
+ .end = OMAP_RNG_BASE + 0x4f,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device omap_rng_device = {
+ .name = "omap_rng",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(rng_resources),
+ .resource = rng_resources,
+};
+
+static void omap_init_rng(void)
+{
+ (void) platform_device_register(&omap_rng_device);
+}
+#else
+static inline void omap_init_rng(void) {}
+#endif
+
+/*-------------------------------------------------------------------------*/
+
/* Numbering for the SPI-capable controllers when used for SPI:
* spi = 1
* uwire = 2
@@ -324,39 +357,6 @@
static inline void omap_init_wdt(void) {}
#endif
-/*-------------------------------------------------------------------------*/
-
-#if defined(CONFIG_HW_RANDOM_OMAP) || defined(CONFIG_HW_RANDOM_OMAP_MODULE)
-
-#ifdef CONFIG_ARCH_OMAP24XX
-#define OMAP_RNG_BASE 0x480A0000
-#else
-#define OMAP_RNG_BASE 0xfffe5000
-#endif
-
-static struct resource rng_resources[] = {
- {
- .start = OMAP_RNG_BASE,
- .end = OMAP_RNG_BASE + 0x4f,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device omap_rng_device = {
- .name = "omap_rng",
- .id = -1,
- .num_resources = ARRAY_SIZE(rng_resources),
- .resource = rng_resources,
-};
-
-static void omap_init_rng(void)
-{
- (void) platform_device_register(&omap_rng_device);
-}
-#else
-static inline void omap_init_rng(void) {}
-#endif
-
/*
* This gets called after board-specific INIT_MACHINE, and initializes most
* on-chip peripherals accessible on this board (except for few like USB):
@@ -384,9 +384,9 @@
*/
omap_init_dsp();
omap_init_kp();
+ omap_init_rng();
omap_init_uwire();
omap_init_wdt();
- omap_init_rng();
return 0;
}
arch_initcall(omap_init_devices);
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index d17375e..09d82b3 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -47,7 +47,6 @@
#endif
#define OMAP_DMA_ACTIVE 0x01
-#define OMAP_DMA_CCR_EN (1 << 7)
#define OMAP2_DMA_CSR_CLEAR_MASK 0xffe
#define OMAP_FUNC_MUX_ARM_BASE (0xfffe1000 + 0xec)
@@ -1120,17 +1119,8 @@
{
int lch;
- /*
- * On OMAP1510, internal LCD controller will start the transfer
- * when it gets enabled, so assume DMA running if LCD enabled.
- */
- if (cpu_is_omap1510())
- if (omap_readw(0xfffec000 + 0x00) & (1 << 0))
- return 1;
-
- /* Check if LCD DMA is running */
- if (cpu_is_omap16xx())
- if (omap_readw(OMAP1610_DMA_LCD_CCR) & OMAP_DMA_CCR_EN)
+ if (cpu_class_is_omap1())
+ if (omap_lcd_dma_running())
return 1;
for (lch = 0; lch < dma_chan_count; lch++)
@@ -1990,377 +1980,6 @@
/*----------------------------------------------------------------------------*/
-static struct lcd_dma_info {
- spinlock_t lock;
- int reserved;
- void (*callback)(u16 status, void *data);
- void *cb_data;
-
- int active;
- unsigned long addr, size;
- int rotate, data_type, xres, yres;
- int vxres;
- int mirror;
- int xscale, yscale;
- int ext_ctrl;
- int src_port;
- int single_transfer;
-} lcd_dma;
-
-void omap_set_lcd_dma_b1(unsigned long addr, u16 fb_xres, u16 fb_yres,
- int data_type)
-{
- lcd_dma.addr = addr;
- lcd_dma.data_type = data_type;
- lcd_dma.xres = fb_xres;
- lcd_dma.yres = fb_yres;
-}
-EXPORT_SYMBOL(omap_set_lcd_dma_b1);
-
-void omap_set_lcd_dma_src_port(int port)
-{
- lcd_dma.src_port = port;
-}
-
-void omap_set_lcd_dma_ext_controller(int external)
-{
- lcd_dma.ext_ctrl = external;
-}
-EXPORT_SYMBOL(omap_set_lcd_dma_ext_controller);
-
-void omap_set_lcd_dma_single_transfer(int single)
-{
- lcd_dma.single_transfer = single;
-}
-EXPORT_SYMBOL(omap_set_lcd_dma_single_transfer);
-
-void omap_set_lcd_dma_b1_rotation(int rotate)
-{
- if (omap_dma_in_1510_mode()) {
- printk(KERN_ERR "DMA rotation is not supported in 1510 mode\n");
- BUG();
- return;
- }
- lcd_dma.rotate = rotate;
-}
-EXPORT_SYMBOL(omap_set_lcd_dma_b1_rotation);
-
-void omap_set_lcd_dma_b1_mirror(int mirror)
-{
- if (omap_dma_in_1510_mode()) {
- printk(KERN_ERR "DMA mirror is not supported in 1510 mode\n");
- BUG();
- }
- lcd_dma.mirror = mirror;
-}
-EXPORT_SYMBOL(omap_set_lcd_dma_b1_mirror);
-
-void omap_set_lcd_dma_b1_vxres(unsigned long vxres)
-{
- if (omap_dma_in_1510_mode()) {
- printk(KERN_ERR "DMA virtual resulotion is not supported "
- "in 1510 mode\n");
- BUG();
- }
- lcd_dma.vxres = vxres;
-}
-EXPORT_SYMBOL(omap_set_lcd_dma_b1_vxres);
-
-void omap_set_lcd_dma_b1_scale(unsigned int xscale, unsigned int yscale)
-{
- if (omap_dma_in_1510_mode()) {
- printk(KERN_ERR "DMA scale is not supported in 1510 mode\n");
- BUG();
- }
- lcd_dma.xscale = xscale;
- lcd_dma.yscale = yscale;
-}
-EXPORT_SYMBOL(omap_set_lcd_dma_b1_scale);
-
-static void set_b1_regs(void)
-{
- unsigned long top, bottom;
- int es;
- u16 w;
- unsigned long en, fn;
- long ei, fi;
- unsigned long vxres;
- unsigned int xscale, yscale;
-
- switch (lcd_dma.data_type) {
- case OMAP_DMA_DATA_TYPE_S8:
- es = 1;
- break;
- case OMAP_DMA_DATA_TYPE_S16:
- es = 2;
- break;
- case OMAP_DMA_DATA_TYPE_S32:
- es = 4;
- break;
- default:
- BUG();
- return;
- }
-
- vxres = lcd_dma.vxres ? lcd_dma.vxres : lcd_dma.xres;
- xscale = lcd_dma.xscale ? lcd_dma.xscale : 1;
- yscale = lcd_dma.yscale ? lcd_dma.yscale : 1;
- BUG_ON(vxres < lcd_dma.xres);
-
-#define PIXADDR(x, y) (lcd_dma.addr + \
- ((y) * vxres * yscale + (x) * xscale) * es)
-#define PIXSTEP(sx, sy, dx, dy) (PIXADDR(dx, dy) - PIXADDR(sx, sy) - es + 1)
-
- switch (lcd_dma.rotate) {
- case 0:
- if (!lcd_dma.mirror) {
- top = PIXADDR(0, 0);
- bottom = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1);
- /* 1510 DMA requires the bottom address to be 2 more
- * than the actual last memory access location. */
- if (omap_dma_in_1510_mode() &&
- lcd_dma.data_type == OMAP_DMA_DATA_TYPE_S32)
- bottom += 2;
- ei = PIXSTEP(0, 0, 1, 0);
- fi = PIXSTEP(lcd_dma.xres - 1, 0, 0, 1);
- } else {
- top = PIXADDR(lcd_dma.xres - 1, 0);
- bottom = PIXADDR(0, lcd_dma.yres - 1);
- ei = PIXSTEP(1, 0, 0, 0);
- fi = PIXSTEP(0, 0, lcd_dma.xres - 1, 1);
- }
- en = lcd_dma.xres;
- fn = lcd_dma.yres;
- break;
- case 90:
- if (!lcd_dma.mirror) {
- top = PIXADDR(0, lcd_dma.yres - 1);
- bottom = PIXADDR(lcd_dma.xres - 1, 0);
- ei = PIXSTEP(0, 1, 0, 0);
- fi = PIXSTEP(0, 0, 1, lcd_dma.yres - 1);
- } else {
- top = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1);
- bottom = PIXADDR(0, 0);
- ei = PIXSTEP(0, 1, 0, 0);
- fi = PIXSTEP(1, 0, 0, lcd_dma.yres - 1);
- }
- en = lcd_dma.yres;
- fn = lcd_dma.xres;
- break;
- case 180:
- if (!lcd_dma.mirror) {
- top = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1);
- bottom = PIXADDR(0, 0);
- ei = PIXSTEP(1, 0, 0, 0);
- fi = PIXSTEP(0, 1, lcd_dma.xres - 1, 0);
- } else {
- top = PIXADDR(0, lcd_dma.yres - 1);
- bottom = PIXADDR(lcd_dma.xres - 1, 0);
- ei = PIXSTEP(0, 0, 1, 0);
- fi = PIXSTEP(lcd_dma.xres - 1, 1, 0, 0);
- }
- en = lcd_dma.xres;
- fn = lcd_dma.yres;
- break;
- case 270:
- if (!lcd_dma.mirror) {
- top = PIXADDR(lcd_dma.xres - 1, 0);
- bottom = PIXADDR(0, lcd_dma.yres - 1);
- ei = PIXSTEP(0, 0, 0, 1);
- fi = PIXSTEP(1, lcd_dma.yres - 1, 0, 0);
- } else {
- top = PIXADDR(0, 0);
- bottom = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1);
- ei = PIXSTEP(0, 0, 0, 1);
- fi = PIXSTEP(0, lcd_dma.yres - 1, 1, 0);
- }
- en = lcd_dma.yres;
- fn = lcd_dma.xres;
- break;
- default:
- BUG();
- return; /* Suppress warning about uninitialized vars */
- }
-
- if (omap_dma_in_1510_mode()) {
- omap_writew(top >> 16, OMAP1510_DMA_LCD_TOP_F1_U);
- omap_writew(top, OMAP1510_DMA_LCD_TOP_F1_L);
- omap_writew(bottom >> 16, OMAP1510_DMA_LCD_BOT_F1_U);
- omap_writew(bottom, OMAP1510_DMA_LCD_BOT_F1_L);
-
- return;
- }
-
- /* 1610 regs */
- omap_writew(top >> 16, OMAP1610_DMA_LCD_TOP_B1_U);
- omap_writew(top, OMAP1610_DMA_LCD_TOP_B1_L);
- omap_writew(bottom >> 16, OMAP1610_DMA_LCD_BOT_B1_U);
- omap_writew(bottom, OMAP1610_DMA_LCD_BOT_B1_L);
-
- omap_writew(en, OMAP1610_DMA_LCD_SRC_EN_B1);
- omap_writew(fn, OMAP1610_DMA_LCD_SRC_FN_B1);
-
- w = omap_readw(OMAP1610_DMA_LCD_CSDP);
- w &= ~0x03;
- w |= lcd_dma.data_type;
- omap_writew(w, OMAP1610_DMA_LCD_CSDP);
-
- w = omap_readw(OMAP1610_DMA_LCD_CTRL);
- /* Always set the source port as SDRAM for now*/
- w &= ~(0x03 << 6);
- if (lcd_dma.callback != NULL)
- w |= 1 << 1; /* Block interrupt enable */
- else
- w &= ~(1 << 1);
- omap_writew(w, OMAP1610_DMA_LCD_CTRL);
-
- if (!(lcd_dma.rotate || lcd_dma.mirror ||
- lcd_dma.vxres || lcd_dma.xscale || lcd_dma.yscale))
- return;
-
- w = omap_readw(OMAP1610_DMA_LCD_CCR);
- /* Set the double-indexed addressing mode */
- w |= (0x03 << 12);
- omap_writew(w, OMAP1610_DMA_LCD_CCR);
-
- omap_writew(ei, OMAP1610_DMA_LCD_SRC_EI_B1);
- omap_writew(fi >> 16, OMAP1610_DMA_LCD_SRC_FI_B1_U);
- omap_writew(fi, OMAP1610_DMA_LCD_SRC_FI_B1_L);
-}
-
-static irqreturn_t lcd_dma_irq_handler(int irq, void *dev_id)
-{
- u16 w;
-
- w = omap_readw(OMAP1610_DMA_LCD_CTRL);
- if (unlikely(!(w & (1 << 3)))) {
- printk(KERN_WARNING "Spurious LCD DMA IRQ\n");
- return IRQ_NONE;
- }
- /* Ack the IRQ */
- w |= (1 << 3);
- omap_writew(w, OMAP1610_DMA_LCD_CTRL);
- lcd_dma.active = 0;
- if (lcd_dma.callback != NULL)
- lcd_dma.callback(w, lcd_dma.cb_data);
-
- return IRQ_HANDLED;
-}
-
-int omap_request_lcd_dma(void (*callback)(u16 status, void *data),
- void *data)
-{
- spin_lock_irq(&lcd_dma.lock);
- if (lcd_dma.reserved) {
- spin_unlock_irq(&lcd_dma.lock);
- printk(KERN_ERR "LCD DMA channel already reserved\n");
- BUG();
- return -EBUSY;
- }
- lcd_dma.reserved = 1;
- spin_unlock_irq(&lcd_dma.lock);
- lcd_dma.callback = callback;
- lcd_dma.cb_data = data;
- lcd_dma.active = 0;
- lcd_dma.single_transfer = 0;
- lcd_dma.rotate = 0;
- lcd_dma.vxres = 0;
- lcd_dma.mirror = 0;
- lcd_dma.xscale = 0;
- lcd_dma.yscale = 0;
- lcd_dma.ext_ctrl = 0;
- lcd_dma.src_port = 0;
-
- return 0;
-}
-EXPORT_SYMBOL(omap_request_lcd_dma);
-
-void omap_free_lcd_dma(void)
-{
- spin_lock(&lcd_dma.lock);
- if (!lcd_dma.reserved) {
- spin_unlock(&lcd_dma.lock);
- printk(KERN_ERR "LCD DMA is not reserved\n");
- BUG();
- return;
- }
- if (!enable_1510_mode)
- omap_writew(omap_readw(OMAP1610_DMA_LCD_CCR) & ~1,
- OMAP1610_DMA_LCD_CCR);
- lcd_dma.reserved = 0;
- spin_unlock(&lcd_dma.lock);
-}
-EXPORT_SYMBOL(omap_free_lcd_dma);
-
-void omap_enable_lcd_dma(void)
-{
- u16 w;
-
- /*
- * Set the Enable bit only if an external controller is
- * connected. Otherwise the OMAP internal controller will
- * start the transfer when it gets enabled.
- */
- if (enable_1510_mode || !lcd_dma.ext_ctrl)
- return;
-
- w = omap_readw(OMAP1610_DMA_LCD_CTRL);
- w |= 1 << 8;
- omap_writew(w, OMAP1610_DMA_LCD_CTRL);
-
- lcd_dma.active = 1;
-
- w = omap_readw(OMAP1610_DMA_LCD_CCR);
- w |= 1 << 7;
- omap_writew(w, OMAP1610_DMA_LCD_CCR);
-}
-EXPORT_SYMBOL(omap_enable_lcd_dma);
-
-void omap_setup_lcd_dma(void)
-{
- BUG_ON(lcd_dma.active);
- if (!enable_1510_mode) {
- /* Set some reasonable defaults */
- omap_writew(0x5440, OMAP1610_DMA_LCD_CCR);
- omap_writew(0x9102, OMAP1610_DMA_LCD_CSDP);
- omap_writew(0x0004, OMAP1610_DMA_LCD_LCH_CTRL);
- }
- set_b1_regs();
- if (!enable_1510_mode) {
- u16 w;
-
- w = omap_readw(OMAP1610_DMA_LCD_CCR);
- /*
- * If DMA was already active set the end_prog bit to have
- * the programmed register set loaded into the active
- * register set.
- */
- w |= 1 << 11; /* End_prog */
- if (!lcd_dma.single_transfer)
- w |= (3 << 8); /* Auto_init, repeat */
- omap_writew(w, OMAP1610_DMA_LCD_CCR);
- }
-}
-EXPORT_SYMBOL(omap_setup_lcd_dma);
-
-void omap_stop_lcd_dma(void)
-{
- u16 w;
-
- lcd_dma.active = 0;
- if (enable_1510_mode || !lcd_dma.ext_ctrl)
- return;
-
- w = omap_readw(OMAP1610_DMA_LCD_CCR);
- w &= ~(1 << 7);
- omap_writew(w, OMAP1610_DMA_LCD_CCR);
-
- w = omap_readw(OMAP1610_DMA_LCD_CTRL);
- w &= ~(1 << 8);
- omap_writew(w, OMAP1610_DMA_LCD_CTRL);
-}
-EXPORT_SYMBOL(omap_stop_lcd_dma);
-
void omap_dma_global_context_save(void)
{
omap_dma_global_context.dma_irqenable_l0 =
@@ -2465,14 +2084,6 @@
dma_chan_count = 16;
} else
dma_chan_count = 9;
- if (cpu_is_omap16xx()) {
- u16 w;
-
- /* this would prevent OMAP sleep */
- w = omap_readw(OMAP1610_DMA_LCD_CTRL);
- w &= ~(1 << 8);
- omap_writew(w, OMAP1610_DMA_LCD_CTRL);
- }
} else if (cpu_class_is_omap2()) {
u8 revision = dma_read(REVISION) & 0xff;
printk(KERN_INFO "OMAP DMA hardware revision %d.%d\n",
@@ -2483,7 +2094,6 @@
return 0;
}
- spin_lock_init(&lcd_dma.lock);
spin_lock_init(&dma_chan_lock);
for (ch = 0; ch < dma_chan_count; ch++) {
@@ -2548,22 +2158,6 @@
}
}
-
- /* FIXME: Update LCD DMA to work on 24xx */
- if (cpu_class_is_omap1()) {
- r = request_irq(INT_DMA_LCD, lcd_dma_irq_handler, 0,
- "LCD DMA", NULL);
- if (r != 0) {
- int i;
-
- printk(KERN_ERR "unable to request IRQ for LCD DMA "
- "(error %d)\n", r);
- for (i = 0; i < dma_chan_count; i++)
- free_irq(omap1_dma_irq[i], (void *) (i + 1));
- goto out_free;
- }
- }
-
return 0;
out_free:
diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c
index c08362d..33fff4e 100644
--- a/arch/arm/plat-omap/i2c.c
+++ b/arch/arm/plat-omap/i2c.c
@@ -80,47 +80,8 @@
#endif
};
-#if defined(CONFIG_ARCH_OMAP24XX)
-static const int omap24xx_pins[][2] = {
- { M19_24XX_I2C1_SCL, L15_24XX_I2C1_SDA },
- { J15_24XX_I2C2_SCL, H19_24XX_I2C2_SDA },
-};
-#else
-static const int omap24xx_pins[][2] = {};
-#endif
-#if defined(CONFIG_ARCH_OMAP34XX)
-static const int omap34xx_pins[][2] = {
- { K21_34XX_I2C1_SCL, J21_34XX_I2C1_SDA},
- { AF15_34XX_I2C2_SCL, AE15_34XX_I2C2_SDA},
- { AF14_34XX_I2C3_SCL, AG14_34XX_I2C3_SDA},
-};
-#else
-static const int omap34xx_pins[][2] = {};
-#endif
-
#define OMAP_I2C_CMDLINE_SETUP (BIT(31))
-static void __init omap_i2c_mux_pins(int bus)
-{
- int scl, sda;
-
- if (cpu_class_is_omap1()) {
- scl = I2C_SCL;
- sda = I2C_SDA;
- } else if (cpu_is_omap24xx()) {
- scl = omap24xx_pins[bus][0];
- sda = omap24xx_pins[bus][1];
- } else if (cpu_is_omap34xx()) {
- scl = omap34xx_pins[bus][0];
- sda = omap34xx_pins[bus][1];
- } else {
- return;
- }
-
- omap_cfg_reg(sda);
- omap_cfg_reg(scl);
-}
-
static int __init omap_i2c_nr_ports(void)
{
int ports = 0;
@@ -156,7 +117,6 @@
res[1].start = irq;
}
- omap_i2c_mux_pins(bus_id - 1);
return platform_device_register(pdev);
}
@@ -209,7 +169,7 @@
subsys_initcall(omap_register_i2c_bus_cmdline);
/**
- * omap_register_i2c_bus - register I2C bus with device descriptors
+ * omap_plat_register_i2c_bus - register I2C bus with device descriptors
* @bus_id: bus id counting from number 1
* @clkrate: clock rate of the bus in kHz
* @info: pointer into I2C device descriptor table or NULL
@@ -217,7 +177,7 @@
*
* Returns 0 on success or an error code.
*/
-int __init omap_register_i2c_bus(int bus_id, u32 clkrate,
+int __init omap_plat_register_i2c_bus(int bus_id, u32 clkrate,
struct i2c_board_info const *info,
unsigned len)
{
diff --git a/arch/arm/plat-omap/include/plat/board.h b/arch/arm/plat-omap/include/plat/board.h
index abb17b6..376ce18 100644
--- a/arch/arm/plat-omap/include/plat/board.h
+++ b/arch/arm/plat-omap/include/plat/board.h
@@ -114,15 +114,6 @@
void (*set_power)(struct omap_pwm_led_platform_data *self, int on_off);
};
-/* See arch/arm/plat-omap/include/mach/gpio-switch.h for definitions */
-struct omap_gpio_switch_config {
- char name[12];
- u16 gpio;
- int flags:4;
- int type:4;
- int key_code:24; /* Linux key code */
-};
-
struct omap_uart_config {
/* Bit field of UARTs present; bit 0 --> UART1 */
unsigned int enabled_uarts;
diff --git a/arch/arm/plat-omap/include/plat/common.h b/arch/arm/plat-omap/include/plat/common.h
index 2f816fe..32c2227 100644
--- a/arch/arm/plat-omap/include/plat/common.h
+++ b/arch/arm/plat-omap/include/plat/common.h
@@ -27,7 +27,7 @@
#ifndef __ARCH_ARM_MACH_OMAP_COMMON_H
#define __ARCH_ARM_MACH_OMAP_COMMON_H
-#include <linux/i2c.h>
+#include <plat/i2c.h>
struct sys_timer;
@@ -36,18 +36,6 @@
extern void omap_map_common_io(void);
extern struct sys_timer omap_timer;
-#if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE)
-extern int omap_register_i2c_bus(int bus_id, u32 clkrate,
- struct i2c_board_info const *info,
- unsigned len);
-#else
-static inline int omap_register_i2c_bus(int bus_id, u32 clkrate,
- struct i2c_board_info const *info,
- unsigned len)
-{
- return 0;
-}
-#endif
/* IO bases for various OMAP processors */
struct omap_globals {
diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h
index 2e17890..9a028bd 100644
--- a/arch/arm/plat-omap/include/plat/cpu.h
+++ b/arch/arm/plat-omap/include/plat/cpu.h
@@ -176,11 +176,13 @@
IS_OMAP_CLASS(16xx, 0x16)
IS_OMAP_CLASS(24xx, 0x24)
IS_OMAP_CLASS(34xx, 0x34)
+IS_OMAP_CLASS(44xx, 0x44)
IS_OMAP_SUBCLASS(242x, 0x242)
IS_OMAP_SUBCLASS(243x, 0x243)
IS_OMAP_SUBCLASS(343x, 0x343)
IS_OMAP_SUBCLASS(363x, 0x363)
+IS_OMAP_SUBCLASS(443x, 0x443)
#define cpu_is_omap7xx() 0
#define cpu_is_omap15xx() 0
@@ -393,11 +395,11 @@
(!omap3_has_iva()) && \
(!omap3_has_sgx()))
# define cpu_is_omap3515() (cpu_is_omap3430() && \
- (omap3_has_iva()) && \
- (!omap3_has_sgx()))
+ (!omap3_has_iva()) && \
+ (omap3_has_sgx()))
# define cpu_is_omap3525() (cpu_is_omap3430() && \
- (omap3_has_sgx()) && \
- (!omap3_has_iva()))
+ (!omap3_has_sgx()) && \
+ (omap3_has_iva()))
# define cpu_is_omap3530() (cpu_is_omap3430())
# define cpu_is_omap3505() is_omap3505()
# define cpu_is_omap3517() is_omap3517()
@@ -408,8 +410,8 @@
# if defined(CONFIG_ARCH_OMAP4)
# undef cpu_is_omap44xx
# undef cpu_is_omap443x
-# define cpu_is_omap44xx() 1
-# define cpu_is_omap443x() 1
+# define cpu_is_omap44xx() is_omap44xx()
+# define cpu_is_omap443x() is_omap443x()
# endif
/* Macros to detect if we have OMAP1 or OMAP2 */
@@ -436,14 +438,15 @@
#define OMAP3630_REV_ES1_0 0x36300034
#define OMAP35XX_CLASS 0x35000034
-#define OMAP3503_REV(v) (OMAP35XX_CLASS | (0x3503 << 16) | (v << 12))
-#define OMAP3515_REV(v) (OMAP35XX_CLASS | (0x3515 << 16) | (v << 12))
-#define OMAP3525_REV(v) (OMAP35XX_CLASS | (0x3525 << 16) | (v << 12))
-#define OMAP3530_REV(v) (OMAP35XX_CLASS | (0x3530 << 16) | (v << 12))
-#define OMAP3505_REV(v) (OMAP35XX_CLASS | (0x3505 << 16) | (v << 12))
-#define OMAP3517_REV(v) (OMAP35XX_CLASS | (0x3517 << 16) | (v << 12))
+#define OMAP3503_REV(v) (OMAP35XX_CLASS | (0x3503 << 16) | (v << 8))
+#define OMAP3515_REV(v) (OMAP35XX_CLASS | (0x3515 << 16) | (v << 8))
+#define OMAP3525_REV(v) (OMAP35XX_CLASS | (0x3525 << 16) | (v << 8))
+#define OMAP3530_REV(v) (OMAP35XX_CLASS | (0x3530 << 16) | (v << 8))
+#define OMAP3505_REV(v) (OMAP35XX_CLASS | (0x3505 << 16) | (v << 8))
+#define OMAP3517_REV(v) (OMAP35XX_CLASS | (0x3517 << 16) | (v << 8))
-#define OMAP443X_CLASS 0x44300034
+#define OMAP443X_CLASS 0x44300044
+#define OMAP4430_REV_ES1_0 0x44300044
/*
* omap_chip bits
diff --git a/arch/arm/plat-omap/include/plat/dma.h b/arch/arm/plat-omap/include/plat/dma.h
index 1c017b2..4ede9e1 100644
--- a/arch/arm/plat-omap/include/plat/dma.h
+++ b/arch/arm/plat-omap/include/plat/dma.h
@@ -401,33 +401,6 @@
/*----------------------------------------------------------------------------*/
-/* Hardware registers for LCD DMA */
-#define OMAP1510_DMA_LCD_BASE (0xfffedb00)
-#define OMAP1510_DMA_LCD_CTRL (OMAP1510_DMA_LCD_BASE + 0x00)
-#define OMAP1510_DMA_LCD_TOP_F1_L (OMAP1510_DMA_LCD_BASE + 0x02)
-#define OMAP1510_DMA_LCD_TOP_F1_U (OMAP1510_DMA_LCD_BASE + 0x04)
-#define OMAP1510_DMA_LCD_BOT_F1_L (OMAP1510_DMA_LCD_BASE + 0x06)
-#define OMAP1510_DMA_LCD_BOT_F1_U (OMAP1510_DMA_LCD_BASE + 0x08)
-
-#define OMAP1610_DMA_LCD_BASE (0xfffee300)
-#define OMAP1610_DMA_LCD_CSDP (OMAP1610_DMA_LCD_BASE + 0xc0)
-#define OMAP1610_DMA_LCD_CCR (OMAP1610_DMA_LCD_BASE + 0xc2)
-#define OMAP1610_DMA_LCD_CTRL (OMAP1610_DMA_LCD_BASE + 0xc4)
-#define OMAP1610_DMA_LCD_TOP_B1_L (OMAP1610_DMA_LCD_BASE + 0xc8)
-#define OMAP1610_DMA_LCD_TOP_B1_U (OMAP1610_DMA_LCD_BASE + 0xca)
-#define OMAP1610_DMA_LCD_BOT_B1_L (OMAP1610_DMA_LCD_BASE + 0xcc)
-#define OMAP1610_DMA_LCD_BOT_B1_U (OMAP1610_DMA_LCD_BASE + 0xce)
-#define OMAP1610_DMA_LCD_TOP_B2_L (OMAP1610_DMA_LCD_BASE + 0xd0)
-#define OMAP1610_DMA_LCD_TOP_B2_U (OMAP1610_DMA_LCD_BASE + 0xd2)
-#define OMAP1610_DMA_LCD_BOT_B2_L (OMAP1610_DMA_LCD_BASE + 0xd4)
-#define OMAP1610_DMA_LCD_BOT_B2_U (OMAP1610_DMA_LCD_BASE + 0xd6)
-#define OMAP1610_DMA_LCD_SRC_EI_B1 (OMAP1610_DMA_LCD_BASE + 0xd8)
-#define OMAP1610_DMA_LCD_SRC_FI_B1_L (OMAP1610_DMA_LCD_BASE + 0xda)
-#define OMAP1610_DMA_LCD_SRC_EN_B1 (OMAP1610_DMA_LCD_BASE + 0xe0)
-#define OMAP1610_DMA_LCD_SRC_FN_B1 (OMAP1610_DMA_LCD_BASE + 0xe4)
-#define OMAP1610_DMA_LCD_LCH_CTRL (OMAP1610_DMA_LCD_BASE + 0xea)
-#define OMAP1610_DMA_LCD_SRC_FI_B1_U (OMAP1610_DMA_LCD_BASE + 0xf4)
-
#define OMAP1_DMA_TOUT_IRQ (1 << 0)
#define OMAP_DMA_DROP_IRQ (1 << 1)
#define OMAP_DMA_HALF_IRQ (1 << 2)
@@ -441,6 +414,8 @@
#define OMAP2_DMA_SUPERVISOR_ERR_IRQ (1 << 10)
#define OMAP2_DMA_MISALIGNED_ERR_IRQ (1 << 11)
+#define OMAP_DMA_CCR_EN (1 << 7)
+
#define OMAP_DMA_DATA_TYPE_S8 0x00
#define OMAP_DMA_DATA_TYPE_S16 0x01
#define OMAP_DMA_DATA_TYPE_S32 0x02
@@ -503,14 +478,6 @@
#define DMA_CH_PRIO_HIGH 0x1
#define DMA_CH_PRIO_LOW 0x0 /* Def */
-/* LCD DMA block numbers */
-enum {
- OMAP_LCD_DMA_B1_TOP,
- OMAP_LCD_DMA_B1_BOTTOM,
- OMAP_LCD_DMA_B2_TOP,
- OMAP_LCD_DMA_B2_BOTTOM
-};
-
enum omap_dma_burst_mode {
OMAP_DMA_DATA_BURST_DIS = 0,
OMAP_DMA_DATA_BURST_4,
@@ -661,20 +628,13 @@
extern int omap_dma_chain_status(int chain_id);
#endif
-/* LCD DMA functions */
-extern int omap_request_lcd_dma(void (*callback)(u16 status, void *data),
- void *data);
-extern void omap_free_lcd_dma(void);
-extern void omap_setup_lcd_dma(void);
-extern void omap_enable_lcd_dma(void);
-extern void omap_stop_lcd_dma(void);
-extern void omap_set_lcd_dma_ext_controller(int external);
-extern void omap_set_lcd_dma_single_transfer(int single);
-extern void omap_set_lcd_dma_b1(unsigned long addr, u16 fb_xres, u16 fb_yres,
- int data_type);
-extern void omap_set_lcd_dma_b1_rotation(int rotate);
-extern void omap_set_lcd_dma_b1_vxres(unsigned long vxres);
-extern void omap_set_lcd_dma_b1_mirror(int mirror);
-extern void omap_set_lcd_dma_b1_scale(unsigned int xscale, unsigned int yscale);
+#if defined(CONFIG_ARCH_OMAP1) && defined(CONFIG_FB_OMAP)
+#include <mach/lcd_dma.h>
+#else
+static inline int omap_lcd_dma_running(void)
+{
+ return 0;
+}
+#endif
#endif /* __ASM_ARCH_DMA_H */
diff --git a/arch/arm/plat-omap/include/plat/gpmc.h b/arch/arm/plat-omap/include/plat/gpmc.h
index 696e0ca..e081338 100644
--- a/arch/arm/plat-omap/include/plat/gpmc.h
+++ b/arch/arm/plat-omap/include/plat/gpmc.h
@@ -45,7 +45,7 @@
#define GPMC_CONFIG1_DEVICESIZE_16 GPMC_CONFIG1_DEVICESIZE(1)
#define GPMC_CONFIG1_DEVICETYPE(val) ((val & 3) << 10)
#define GPMC_CONFIG1_DEVICETYPE_NOR GPMC_CONFIG1_DEVICETYPE(0)
-#define GPMC_CONFIG1_DEVICETYPE_NAND GPMC_CONFIG1_DEVICETYPE(1)
+#define GPMC_CONFIG1_DEVICETYPE_NAND GPMC_CONFIG1_DEVICETYPE(2)
#define GPMC_CONFIG1_MUXADDDATA (1 << 9)
#define GPMC_CONFIG1_TIME_PARA_GRAN (1 << 4)
#define GPMC_CONFIG1_FCLK_DIV(val) (val & 3)
diff --git a/arch/arm/plat-omap/include/plat/i2c.h b/arch/arm/plat-omap/include/plat/i2c.h
new file mode 100644
index 0000000..585d9ca
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/i2c.h
@@ -0,0 +1,39 @@
+/*
+ * Helper module for board specific I2C bus registration
+ *
+ * Copyright (C) 2009 Nokia Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/i2c.h>
+
+#if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE)
+extern int omap_register_i2c_bus(int bus_id, u32 clkrate,
+ struct i2c_board_info const *info,
+ unsigned len);
+#else
+static inline int omap_register_i2c_bus(int bus_id, u32 clkrate,
+ struct i2c_board_info const *info,
+ unsigned len)
+{
+ return 0;
+}
+#endif
+
+int omap_plat_register_i2c_bus(int bus_id, u32 clkrate,
+ struct i2c_board_info const *info,
+ unsigned len);
diff --git a/arch/arm/plat-omap/include/plat/mux.h b/arch/arm/plat-omap/include/plat/mux.h
index ba77de6..8f069cc 100644
--- a/arch/arm/plat-omap/include/plat/mux.h
+++ b/arch/arm/plat-omap/include/plat/mux.h
@@ -130,58 +130,11 @@
#define OMAP2_PULL_UP (1 << 4)
#define OMAP2_ALTELECTRICALSEL (1 << 5)
-/* 34xx specific mux bit defines */
-#define OMAP3_INPUT_EN (1 << 8)
-#define OMAP3_OFF_EN (1 << 9)
-#define OMAP3_OFFOUT_EN (1 << 10)
-#define OMAP3_OFFOUT_VAL (1 << 11)
-#define OMAP3_OFF_PULL_EN (1 << 12)
-#define OMAP3_OFF_PULL_UP (1 << 13)
-#define OMAP3_WAKEUP_EN (1 << 14)
-
-/* 34xx mux mode options for each pin. See TRM for options */
-#define OMAP34XX_MUX_MODE0 0
-#define OMAP34XX_MUX_MODE1 1
-#define OMAP34XX_MUX_MODE2 2
-#define OMAP34XX_MUX_MODE3 3
-#define OMAP34XX_MUX_MODE4 4
-#define OMAP34XX_MUX_MODE5 5
-#define OMAP34XX_MUX_MODE6 6
-#define OMAP34XX_MUX_MODE7 7
-
-/* 34xx active pin states */
-#define OMAP34XX_PIN_OUTPUT 0
-#define OMAP34XX_PIN_INPUT OMAP3_INPUT_EN
-#define OMAP34XX_PIN_INPUT_PULLUP (OMAP2_PULL_ENA | OMAP3_INPUT_EN \
- | OMAP2_PULL_UP)
-#define OMAP34XX_PIN_INPUT_PULLDOWN (OMAP2_PULL_ENA | OMAP3_INPUT_EN)
-
-/* 34xx off mode states */
-#define OMAP34XX_PIN_OFF_NONE 0
-#define OMAP34XX_PIN_OFF_OUTPUT_HIGH (OMAP3_OFF_EN | OMAP3_OFFOUT_EN \
- | OMAP3_OFFOUT_VAL)
-#define OMAP34XX_PIN_OFF_OUTPUT_LOW (OMAP3_OFF_EN | OMAP3_OFFOUT_EN)
-#define OMAP34XX_PIN_OFF_INPUT_PULLUP (OMAP3_OFF_EN | OMAP3_OFF_PULL_EN \
- | OMAP3_OFF_PULL_UP)
-#define OMAP34XX_PIN_OFF_INPUT_PULLDOWN (OMAP3_OFF_EN | OMAP3_OFF_PULL_EN)
-#define OMAP34XX_PIN_OFF_WAKEUPENABLE OMAP3_WAKEUP_EN
-
-#define MUX_CFG_34XX(desc, reg_offset, mux_value) { \
- .name = desc, \
- .debug = 0, \
- .mux_reg = reg_offset, \
- .mux_val = mux_value \
-},
-
struct pin_config {
char *name;
const unsigned int mux_reg;
unsigned char debug;
-#if defined(CONFIG_ARCH_OMAP34XX)
- u16 mux_val; /* Wake-up, off mode, pull, mux mode */
-#endif
-
#if defined(CONFIG_ARCH_OMAP1) || defined(CONFIG_ARCH_OMAP24XX)
const unsigned char mask_offset;
const unsigned char mask;
@@ -219,11 +172,17 @@
AA17_7XX_USB_DM,
W16_7XX_USB_PU_EN,
W17_7XX_USB_VBUSI,
+ W18_7XX_USB_DMCK_OUT,
+ W19_7XX_USB_DCRST,
/* MMC */
MMC_7XX_CMD,
MMC_7XX_CLK,
MMC_7XX_DAT0,
+
+ /* I2C */
+ I2C_7XX_SCL,
+ I2C_7XX_SDA,
};
enum omap1xxx_index {
@@ -681,181 +640,6 @@
};
-enum omap34xx_index {
- /* 34xx I2C */
- K21_34XX_I2C1_SCL,
- J21_34XX_I2C1_SDA,
- AF15_34XX_I2C2_SCL,
- AE15_34XX_I2C2_SDA,
- AF14_34XX_I2C3_SCL,
- AG14_34XX_I2C3_SDA,
- AD26_34XX_I2C4_SCL,
- AE26_34XX_I2C4_SDA,
-
- /* PHY - HSUSB: 12-pin ULPI PHY: Port 1*/
- Y8_3430_USB1HS_PHY_CLK,
- Y9_3430_USB1HS_PHY_STP,
- AA14_3430_USB1HS_PHY_DIR,
- AA11_3430_USB1HS_PHY_NXT,
- W13_3430_USB1HS_PHY_DATA0,
- W12_3430_USB1HS_PHY_DATA1,
- W11_3430_USB1HS_PHY_DATA2,
- Y11_3430_USB1HS_PHY_DATA3,
- W9_3430_USB1HS_PHY_DATA4,
- Y12_3430_USB1HS_PHY_DATA5,
- W8_3430_USB1HS_PHY_DATA6,
- Y13_3430_USB1HS_PHY_DATA7,
-
- /* PHY - HSUSB: 12-pin ULPI PHY: Port 2*/
- AA8_3430_USB2HS_PHY_CLK,
- AA10_3430_USB2HS_PHY_STP,
- AA9_3430_USB2HS_PHY_DIR,
- AB11_3430_USB2HS_PHY_NXT,
- AB10_3430_USB2HS_PHY_DATA0,
- AB9_3430_USB2HS_PHY_DATA1,
- W3_3430_USB2HS_PHY_DATA2,
- T4_3430_USB2HS_PHY_DATA3,
- T3_3430_USB2HS_PHY_DATA4,
- R3_3430_USB2HS_PHY_DATA5,
- R4_3430_USB2HS_PHY_DATA6,
- T2_3430_USB2HS_PHY_DATA7,
-
-
- /* TLL - HSUSB: 12-pin TLL Port 1*/
- Y8_3430_USB1HS_TLL_CLK,
- Y9_3430_USB1HS_TLL_STP,
- AA14_3430_USB1HS_TLL_DIR,
- AA11_3430_USB1HS_TLL_NXT,
- W13_3430_USB1HS_TLL_DATA0,
- W12_3430_USB1HS_TLL_DATA1,
- W11_3430_USB1HS_TLL_DATA2,
- Y11_3430_USB1HS_TLL_DATA3,
- W9_3430_USB1HS_TLL_DATA4,
- Y12_3430_USB1HS_TLL_DATA5,
- W8_3430_USB1HS_TLL_DATA6,
- Y13_3430_USB1HS_TLL_DATA7,
-
- /* TLL - HSUSB: 12-pin TLL Port 2*/
- AA8_3430_USB2HS_TLL_CLK,
- AA10_3430_USB2HS_TLL_STP,
- AA9_3430_USB2HS_TLL_DIR,
- AB11_3430_USB2HS_TLL_NXT,
- AB10_3430_USB2HS_TLL_DATA0,
- AB9_3430_USB2HS_TLL_DATA1,
- W3_3430_USB2HS_TLL_DATA2,
- T4_3430_USB2HS_TLL_DATA3,
- T3_3430_USB2HS_TLL_DATA4,
- R3_3430_USB2HS_TLL_DATA5,
- R4_3430_USB2HS_TLL_DATA6,
- T2_3430_USB2HS_TLL_DATA7,
-
- /* TLL - HSUSB: 12-pin TLL Port 3*/
- AA6_3430_USB3HS_TLL_CLK,
- AB3_3430_USB3HS_TLL_STP,
- AA3_3430_USB3HS_TLL_DIR,
- Y3_3430_USB3HS_TLL_NXT,
- AA5_3430_USB3HS_TLL_DATA0,
- Y4_3430_USB3HS_TLL_DATA1,
- Y5_3430_USB3HS_TLL_DATA2,
- W5_3430_USB3HS_TLL_DATA3,
- AB12_3430_USB3HS_TLL_DATA4,
- AB13_3430_USB3HS_TLL_DATA5,
- AA13_3430_USB3HS_TLL_DATA6,
- AA12_3430_USB3HS_TLL_DATA7,
-
- /* PHY FSUSB: FS Serial for Port 1 (multiple PHY modes supported) */
- AF10_3430_USB1FS_PHY_MM1_RXDP,
- AG9_3430_USB1FS_PHY_MM1_RXDM,
- W13_3430_USB1FS_PHY_MM1_RXRCV,
- W12_3430_USB1FS_PHY_MM1_TXSE0,
- W11_3430_USB1FS_PHY_MM1_TXDAT,
- Y11_3430_USB1FS_PHY_MM1_TXEN_N,
-
- /* PHY FSUSB: FS Serial for Port 2 (multiple PHY modes supported) */
- AF7_3430_USB2FS_PHY_MM2_RXDP,
- AH7_3430_USB2FS_PHY_MM2_RXDM,
- AB10_3430_USB2FS_PHY_MM2_RXRCV,
- AB9_3430_USB2FS_PHY_MM2_TXSE0,
- W3_3430_USB2FS_PHY_MM2_TXDAT,
- T4_3430_USB2FS_PHY_MM2_TXEN_N,
-
- /* PHY FSUSB: FS Serial for Port 3 (multiple PHY modes supported) */
- AH3_3430_USB3FS_PHY_MM3_RXDP,
- AE3_3430_USB3FS_PHY_MM3_RXDM,
- AD1_3430_USB3FS_PHY_MM3_RXRCV,
- AE1_3430_USB3FS_PHY_MM3_TXSE0,
- AD2_3430_USB3FS_PHY_MM3_TXDAT,
- AC1_3430_USB3FS_PHY_MM3_TXEN_N,
-
- /* 34xx GPIO
- * - normally these are bidirectional, no internal pullup/pulldown
- * - "_UP" suffix (GPIO3_UP) if internal pullup is configured
- * - "_DOWN" suffix (GPIO3_DOWN) with internal pulldown
- * - "_OUT" suffix (GPIO3_OUT) for output-only pins (unlike 24xx)
- */
- AF26_34XX_GPIO0,
- AF22_34XX_GPIO9,
- AG9_34XX_GPIO23,
- AH8_34XX_GPIO29,
- U8_34XX_GPIO54_OUT,
- U8_34XX_GPIO54_DOWN,
- L8_34XX_GPIO63,
- G25_34XX_GPIO86_OUT,
- AG4_34XX_GPIO134_OUT,
- AF4_34XX_GPIO135_OUT,
- AE4_34XX_GPIO136_OUT,
- AF6_34XX_GPIO140_UP,
- AE6_34XX_GPIO141,
- AF5_34XX_GPIO142,
- AE5_34XX_GPIO143,
- H19_34XX_GPIO164_OUT,
- J25_34XX_GPIO170,
-
- /* OMAP3 SDRC CKE signals to SDR/DDR ram chips */
- H16_34XX_SDRC_CKE0,
- H17_34XX_SDRC_CKE1,
-
- /* MMC1 */
- N28_3430_MMC1_CLK,
- M27_3430_MMC1_CMD,
- N27_3430_MMC1_DAT0,
- N26_3430_MMC1_DAT1,
- N25_3430_MMC1_DAT2,
- P28_3430_MMC1_DAT3,
- P27_3430_MMC1_DAT4,
- P26_3430_MMC1_DAT5,
- R27_3430_MMC1_DAT6,
- R25_3430_MMC1_DAT7,
-
- /* MMC2 */
- AE2_3430_MMC2_CLK,
- AG5_3430_MMC2_CMD,
- AH5_3430_MMC2_DAT0,
- AH4_3430_MMC2_DAT1,
- AG4_3430_MMC2_DAT2,
- AF4_3430_MMC2_DAT3,
- AE4_3430_MMC2_DAT4,
- AH3_3430_MMC2_DAT5,
- AF3_3430_MMC2_DAT6,
- AE3_3430_MMC2_DAT7,
-
- /* MMC3 */
- AF10_3430_MMC3_CLK,
- AC3_3430_MMC3_CMD,
- AE11_3430_MMC3_DAT0,
- AH9_3430_MMC3_DAT1,
- AF13_3430_MMC3_DAT2,
- AF13_3430_MMC3_DAT3,
-
- /* SYS_NIRQ T2 INT1 */
- AF26_34XX_SYS_NIRQ,
-
- /* EHCI GPIO's for OMAP3EVM (Rev >= E) */
- AH14_34XX_GPIO21,
- AF9_34XX_GPIO22,
- U3_34XX_GPIO61,
-};
-
struct omap_mux_cfg {
struct pin_config *pins;
unsigned long size;
@@ -865,14 +649,14 @@
#ifdef CONFIG_OMAP_MUX
/* setup pin muxing in Linux */
extern int omap1_mux_init(void);
-extern int omap2_mux_init(void);
extern int omap_mux_register(struct omap_mux_cfg *);
extern int omap_cfg_reg(unsigned long reg_cfg);
#else
/* boot loader does it all (no warnings from CONFIG_OMAP_MUX_WARNINGS) */
static inline int omap1_mux_init(void) { return 0; }
-static inline int omap2_mux_init(void) { return 0; }
static inline int omap_cfg_reg(unsigned long reg_cfg) { return 0; }
#endif
+extern int omap2_mux_init(void);
+
#endif
diff --git a/arch/arm/plat-omap/include/plat/serial.h b/arch/arm/plat-omap/include/plat/serial.h
index 9951345..f5a4a92 100644
--- a/arch/arm/plat-omap/include/plat/serial.h
+++ b/arch/arm/plat-omap/include/plat/serial.h
@@ -53,6 +53,7 @@
#ifndef __ASSEMBLER__
extern void __init omap_serial_early_init(void);
extern void omap_serial_init(void);
+extern void omap_serial_init_port(int port);
extern int omap_uart_can_sleep(void);
extern void omap_uart_check_wakeup(void);
extern void omap_uart_prepare_suspend(void);
diff --git a/arch/arm/plat-omap/include/plat/smp.h b/arch/arm/plat-omap/include/plat/smp.h
index dcaa8fd..8983d54 100644
--- a/arch/arm/plat-omap/include/plat/smp.h
+++ b/arch/arm/plat-omap/include/plat/smp.h
@@ -28,6 +28,8 @@
/* Needed for secondary core boot */
extern void omap_secondary_startup(void);
+extern u32 omap_modify_auxcoreboot0(u32 set_mask, u32 clear_mask);
+extern void omap_auxcoreboot_addr(u32 cpu_addr);
/*
* We use Soft IRQ1 as the IPI
diff --git a/arch/arm/plat-omap/mux.c b/arch/arm/plat-omap/mux.c
index 05aebca..0670363 100644
--- a/arch/arm/plat-omap/mux.c
+++ b/arch/arm/plat-omap/mux.c
@@ -54,8 +54,12 @@
{
struct pin_config *reg;
- if (cpu_is_omap44xx())
- return 0;
+ if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
+ printk(KERN_ERR "mux: Broken omap_cfg_reg(%lu) entry\n",
+ index);
+ WARN_ON(1);
+ return -EINVAL;
+ }
if (mux_cfg == NULL) {
printk(KERN_ERR "Pin mux table not initialized\n");
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index ad2bf07..d8d5094 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -48,8 +48,10 @@
#define OMAP3_SRAM_VA 0xfe400000
#define OMAP3_SRAM_PUB_PA 0x40208000
#define OMAP3_SRAM_PUB_VA (OMAP3_SRAM_VA + 0x8000)
-#define OMAP4_SRAM_PA 0x40200000 /*0x402f0000*/
-#define OMAP4_SRAM_VA 0xfe400000 /*0xfe4f0000*/
+#define OMAP4_SRAM_PA 0x40300000
+#define OMAP4_SRAM_VA 0xfe400000
+#define OMAP4_SRAM_PUB_PA (OMAP4_SRAM_PA + 0x4000)
+#define OMAP4_SRAM_PUB_VA (OMAP4_SRAM_VA + 0x4000)
#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
#define SRAM_BOOTLOADER_SZ 0x00
@@ -140,6 +142,10 @@
} else {
omap_sram_size = 0x8000; /* 32K */
}
+ } else if (cpu_is_omap44xx()) {
+ omap_sram_base = OMAP4_SRAM_PUB_VA;
+ omap_sram_start = OMAP4_SRAM_PUB_PA;
+ omap_sram_size = 0xa000; /* 40K */
} else {
omap_sram_base = OMAP2_SRAM_PUB_VA;
omap_sram_start = OMAP2_SRAM_PUB_PA;
@@ -153,7 +159,7 @@
} else if (cpu_is_omap44xx()) {
omap_sram_base = OMAP4_SRAM_VA;
omap_sram_start = OMAP4_SRAM_PA;
- omap_sram_size = 0x8000; /* 32K */
+ omap_sram_size = 0xe000; /* 56K */
} else {
omap_sram_base = OMAP2_SRAM_VA;
omap_sram_start = OMAP2_SRAM_PA;
diff --git a/arch/arm/plat-omap/usb.c b/arch/arm/plat-omap/usb.c
index 51033a4..d3bf17c 100644
--- a/arch/arm/plat-omap/usb.c
+++ b/arch/arm/plat-omap/usb.c
@@ -137,7 +137,13 @@
if (is_device) {
if (cpu_is_omap24xx())
omap_cfg_reg(J20_24XX_USB0_PUEN);
- else
+ else if (cpu_is_omap7xx()) {
+ omap_cfg_reg(AA17_7XX_USB_DM);
+ omap_cfg_reg(W16_7XX_USB_PU_EN);
+ omap_cfg_reg(W17_7XX_USB_VBUSI);
+ omap_cfg_reg(W18_7XX_USB_DMCK_OUT);
+ omap_cfg_reg(W19_7XX_USB_DCRST);
+ } else
omap_cfg_reg(W4_USB_PUEN);
}
diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h
index 7815bfc..5479954 100644
--- a/drivers/net/smc91x.h
+++ b/drivers/net/smc91x.h
@@ -206,21 +206,6 @@
}
}
-#elif defined(CONFIG_ARCH_OMAP)
-
-/* We can only do 16-bit reads and writes in the static memory space. */
-#define SMC_CAN_USE_8BIT 0
-#define SMC_CAN_USE_16BIT 1
-#define SMC_CAN_USE_32BIT 0
-#define SMC_IO_SHIFT 0
-#define SMC_NOWAIT 1
-
-#define SMC_inw(a, r) readw((a) + (r))
-#define SMC_outw(v, a, r) writew(v, (a) + (r))
-#define SMC_insw(a, r, p, l) readsw((a) + (r), p, l)
-#define SMC_outsw(a, r, p, l) writesw((a) + (r), p, l)
-#define SMC_IRQ_FLAGS (-1) /* from resource */
-
#elif defined(CONFIG_SH_SH4202_MICRODEV)
#define SMC_CAN_USE_8BIT 0
diff --git a/drivers/video/omap/lcdc.c b/drivers/video/omap/lcdc.c
index b831e1d..a334839 100644
--- a/drivers/video/omap/lcdc.c
+++ b/drivers/video/omap/lcdc.c
@@ -29,6 +29,7 @@
#include <linux/vmalloc.h>
#include <linux/clk.h>
+#include <mach/lcdc.h>
#include <plat/dma.h>
#include <asm/mach-types.h>
@@ -39,38 +40,6 @@
#define MODULE_NAME "lcdc"
-#define OMAP_LCDC_BASE 0xfffec000
-#define OMAP_LCDC_SIZE 256
-#define OMAP_LCDC_IRQ INT_LCD_CTRL
-
-#define OMAP_LCDC_CONTROL (OMAP_LCDC_BASE + 0x00)
-#define OMAP_LCDC_TIMING0 (OMAP_LCDC_BASE + 0x04)
-#define OMAP_LCDC_TIMING1 (OMAP_LCDC_BASE + 0x08)
-#define OMAP_LCDC_TIMING2 (OMAP_LCDC_BASE + 0x0c)
-#define OMAP_LCDC_STATUS (OMAP_LCDC_BASE + 0x10)
-#define OMAP_LCDC_SUBPANEL (OMAP_LCDC_BASE + 0x14)
-#define OMAP_LCDC_LINE_INT (OMAP_LCDC_BASE + 0x18)
-#define OMAP_LCDC_DISPLAY_STATUS (OMAP_LCDC_BASE + 0x1c)
-
-#define OMAP_LCDC_STAT_DONE (1 << 0)
-#define OMAP_LCDC_STAT_VSYNC (1 << 1)
-#define OMAP_LCDC_STAT_SYNC_LOST (1 << 2)
-#define OMAP_LCDC_STAT_ABC (1 << 3)
-#define OMAP_LCDC_STAT_LINE_INT (1 << 4)
-#define OMAP_LCDC_STAT_FUF (1 << 5)
-#define OMAP_LCDC_STAT_LOADED_PALETTE (1 << 6)
-
-#define OMAP_LCDC_CTRL_LCD_EN (1 << 0)
-#define OMAP_LCDC_CTRL_LCD_TFT (1 << 7)
-#define OMAP_LCDC_CTRL_LINE_IRQ_CLR_SEL (1 << 10)
-
-#define OMAP_LCDC_IRQ_VSYNC (1 << 2)
-#define OMAP_LCDC_IRQ_DONE (1 << 3)
-#define OMAP_LCDC_IRQ_LOADED_PALETTE (1 << 4)
-#define OMAP_LCDC_IRQ_LINE_NIRQ (1 << 5)
-#define OMAP_LCDC_IRQ_LINE (1 << 6)
-#define OMAP_LCDC_IRQ_MASK (((1 << 5) - 1) << 2)
-
#define MAX_PALETTE_SIZE PAGE_SIZE
enum lcdc_load_mode {