[SCSI] remove cmd->serial_number litter
Stop using cmd->serial_number in printks.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
diff --git a/drivers/scsi/in2000.c b/drivers/scsi/in2000.c
index 6568aab..92109b1 100644
--- a/drivers/scsi/in2000.c
+++ b/drivers/scsi/in2000.c
@@ -343,7 +343,7 @@
instance = cmd->device->host;
hostdata = (struct IN2000_hostdata *) instance->hostdata;
- DB(DB_QUEUE_COMMAND, scmd_printk(KERN_DEBUG, cmd, "Q-%02x-%ld(", cmd->cmnd[0], cmd->serial_number))
+ DB(DB_QUEUE_COMMAND, scmd_printk(KERN_DEBUG, cmd, "Q-%02x(", cmd->cmnd[0]))
/* Set up a few fields in the Scsi_Cmnd structure for our own use:
* - host_scribble is the pointer to the next cmd in the input queue
@@ -427,7 +427,7 @@
in2000_execute(cmd->device->host);
- DB(DB_QUEUE_COMMAND, printk(")Q-%ld ", cmd->serial_number))
+ DB(DB_QUEUE_COMMAND, printk(")Q "))
return 0;
}
@@ -705,7 +705,7 @@
* to search the input_Q again...
*/
- DB(DB_EXECUTE, printk("%s%ld)EX-2 ", (cmd->SCp.phase) ? "d:" : "", cmd->serial_number))
+ DB(DB_EXECUTE, printk("%s)EX-2 ", (cmd->SCp.phase) ? "d:" : ""))
}
@@ -1149,7 +1149,7 @@
case CSR_XFER_DONE | PHS_COMMAND:
case CSR_UNEXP | PHS_COMMAND:
case CSR_SRV_REQ | PHS_COMMAND:
- DB(DB_INTR, printk("CMND-%02x,%ld", cmd->cmnd[0], cmd->serial_number))
+ DB(DB_INTR, printk("CMND-%02x", cmd->cmnd[0]))
transfer_pio(cmd->cmnd, cmd->cmd_len, DATA_OUT_DIR, hostdata);
hostdata->state = S_CONNECTED;
break;
@@ -1191,7 +1191,7 @@
switch (msg) {
case COMMAND_COMPLETE:
- DB(DB_INTR, printk("CCMP-%ld", cmd->serial_number))
+ DB(DB_INTR, printk("CCMP"))
write_3393_cmd(hostdata, WD_CMD_NEGATE_ACK);
hostdata->state = S_PRE_CMP_DISC;
break;
@@ -1329,7 +1329,7 @@
write_3393(hostdata, WD_SOURCE_ID, SRCID_ER);
if (phs == 0x60) {
- DB(DB_INTR, printk("SX-DONE-%ld", cmd->serial_number))
+ DB(DB_INTR, printk("SX-DONE"))
cmd->SCp.Message = COMMAND_COMPLETE;
lun = read_3393(hostdata, WD_TARGET_LUN);
DB(DB_INTR, printk(":%d.%d", cmd->SCp.Status, lun))
@@ -1350,7 +1350,7 @@
in2000_execute(instance);
} else {
- printk("%02x:%02x:%02x-%ld: Unknown SEL_XFER_DONE phase!!---", asr, sr, phs, cmd->serial_number);
+ printk("%02x:%02x:%02x: Unknown SEL_XFER_DONE phase!!---", asr, sr, phs);
}
break;
@@ -1417,7 +1417,7 @@
spin_unlock_irqrestore(instance->host_lock, flags);
return IRQ_HANDLED;
}
- DB(DB_INTR, printk("UNEXP_DISC-%ld", cmd->serial_number))
+ DB(DB_INTR, printk("UNEXP_DISC"))
hostdata->connected = NULL;
hostdata->busy[cmd->device->id] &= ~(1 << cmd->device->lun);
hostdata->state = S_UNCONNECTED;
@@ -1442,7 +1442,7 @@
*/
write_3393(hostdata, WD_SOURCE_ID, SRCID_ER);
- DB(DB_INTR, printk("DISC-%ld", cmd->serial_number))
+ DB(DB_INTR, printk("DISC"))
if (cmd == NULL) {
printk(" - Already disconnected! ");
hostdata->state = S_UNCONNECTED;
@@ -1575,7 +1575,6 @@
} else
hostdata->state = S_CONNECTED;
- DB(DB_INTR, printk("-%ld", cmd->serial_number))
break;
default:
@@ -1704,7 +1703,7 @@
prev->host_scribble = cmd->host_scribble;
cmd->host_scribble = NULL;
cmd->result = DID_ABORT << 16;
- printk(KERN_WARNING "scsi%d: Abort - removing command %ld from input_Q. ", instance->host_no, cmd->serial_number);
+ printk(KERN_WARNING "scsi%d: Abort - removing command from input_Q. ", instance->host_no);
cmd->scsi_done(cmd);
return SUCCESS;
}
@@ -1725,7 +1724,7 @@
if (hostdata->connected == cmd) {
- printk(KERN_WARNING "scsi%d: Aborting connected command %ld - ", instance->host_no, cmd->serial_number);
+ printk(KERN_WARNING "scsi%d: Aborting connected command - ", instance->host_no);
printk("sending wd33c93 ABORT command - ");
write_3393(hostdata, WD_CONTROL, CTRL_IDI | CTRL_EDI | CTRL_POLLED);
@@ -2270,7 +2269,7 @@
strcat(bp, "\nconnected: ");
if (hd->connected) {
cmd = (Scsi_Cmnd *) hd->connected;
- sprintf(tbuf, " %ld-%d:%d(%02x)", cmd->serial_number, cmd->device->id, cmd->device->lun, cmd->cmnd[0]);
+ sprintf(tbuf, " %d:%d(%02x)", cmd->device->id, cmd->device->lun, cmd->cmnd[0]);
strcat(bp, tbuf);
}
}
@@ -2278,7 +2277,7 @@
strcat(bp, "\ninput_Q: ");
cmd = (Scsi_Cmnd *) hd->input_Q;
while (cmd) {
- sprintf(tbuf, " %ld-%d:%d(%02x)", cmd->serial_number, cmd->device->id, cmd->device->lun, cmd->cmnd[0]);
+ sprintf(tbuf, " %d:%d(%02x)", cmd->device->id, cmd->device->lun, cmd->cmnd[0]);
strcat(bp, tbuf);
cmd = (Scsi_Cmnd *) cmd->host_scribble;
}
@@ -2287,7 +2286,7 @@
strcat(bp, "\ndisconnected_Q:");
cmd = (Scsi_Cmnd *) hd->disconnected_Q;
while (cmd) {
- sprintf(tbuf, " %ld-%d:%d(%02x)", cmd->serial_number, cmd->device->id, cmd->device->lun, cmd->cmnd[0]);
+ sprintf(tbuf, " %d:%d(%02x)", cmd->device->id, cmd->device->lun, cmd->cmnd[0]);
strcat(bp, tbuf);
cmd = (Scsi_Cmnd *) cmd->host_scribble;
}