bnx2x: Utilize Link Flap Avoidance
Change various flows in the bnx2x driver which up until now flapped
the link - these flows now benefit from the link flap avoidance mechanism.
This includes the removal of the link reset made upon nic init, as it is
possible the link is already active at that time.
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Yaniv Rosner <yaniv.rosner@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index 2105498..dfc5b60 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -2171,7 +2171,6 @@
{
if (!BP_NOMCP(bp)) {
bnx2x_acquire_phy_lock(bp);
- bnx2x_link_reset(&bp->link_params, &bp->link_vars, 1);
bnx2x_phy_init(&bp->link_params, &bp->link_vars);
bnx2x_release_phy_lock(bp);
@@ -2184,12 +2183,19 @@
{
if (!BP_NOMCP(bp)) {
bnx2x_acquire_phy_lock(bp);
- bnx2x_link_reset(&bp->link_params, &bp->link_vars, 1);
+ bnx2x_lfa_reset(&bp->link_params, &bp->link_vars);
bnx2x_release_phy_lock(bp);
} else
BNX2X_ERR("Bootcode is missing - can not reset link\n");
}
+void bnx2x_force_link_reset(struct bnx2x *bp)
+{
+ bnx2x_acquire_phy_lock(bp);
+ bnx2x_link_reset(&bp->link_params, &bp->link_vars, 1);
+ bnx2x_release_phy_lock(bp);
+}
+
u8 bnx2x_link_test(struct bnx2x *bp, u8 is_serdes)
{
u8 rc = 0;
@@ -6757,7 +6763,6 @@
u32 low, high;
u32 val;
- bnx2x__link_reset(bp);
DP(NETIF_MSG_HW, "starting port init port %d\n", port);
@@ -8244,12 +8249,15 @@
* bnx2x_send_unload_done - send UNLOAD_DONE command to the MCP.
*
* @bp: driver handle
+ * @keep_link: true iff link should be kept up
*/
-void bnx2x_send_unload_done(struct bnx2x *bp)
+void bnx2x_send_unload_done(struct bnx2x *bp, bool keep_link)
{
+ u32 reset_param = keep_link ? DRV_MSG_CODE_UNLOAD_SKIP_LINK_RESET : 0;
+
/* Report UNLOAD_DONE to MCP */
if (!BP_NOMCP(bp))
- bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_DONE, 0);
+ bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_DONE, reset_param);
}
static int bnx2x_func_wait_started(struct bnx2x *bp)
@@ -8318,7 +8326,7 @@
return 0;
}
-void bnx2x_chip_cleanup(struct bnx2x *bp, int unload_mode)
+void bnx2x_chip_cleanup(struct bnx2x *bp, int unload_mode, bool keep_link)
{
int port = BP_PORT(bp);
int i, rc = 0;
@@ -8440,7 +8448,7 @@
/* Report UNLOAD_DONE to MCP */
- bnx2x_send_unload_done(bp);
+ bnx2x_send_unload_done(bp, keep_link);
}
void bnx2x_disable_close_the_gate(struct bnx2x *bp)
@@ -8852,7 +8860,8 @@
* driver is owner of the HW
*/
if (!global && !BP_NOMCP(bp)) {
- load_code = bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_REQ, 0);
+ load_code = bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_REQ,
+ DRV_MSG_CODE_LOAD_REQ_WITH_LFA);
if (!load_code) {
BNX2X_ERR("MCP response failure, aborting\n");
rc = -EAGAIN;
@@ -8958,7 +8967,7 @@
/* Stop the driver */
/* If interface has been removed - break */
- if (bnx2x_nic_unload(bp, UNLOAD_RECOVERY))
+ if (bnx2x_nic_unload(bp, UNLOAD_RECOVERY, false))
return;
bp->recovery_state = BNX2X_RECOVERY_WAIT;
@@ -9124,7 +9133,7 @@
bp->sp_rtnl_state = 0;
smp_mb();
- bnx2x_nic_unload(bp, UNLOAD_NORMAL);
+ bnx2x_nic_unload(bp, UNLOAD_NORMAL, true);
bnx2x_nic_load(bp, LOAD_NORMAL);
goto sp_rtnl_exit;
@@ -9310,7 +9319,8 @@
static int __devinit bnx2x_prev_mcp_done(struct bnx2x *bp)
{
- u32 rc = bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_DONE, 0);
+ u32 rc = bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_DONE,
+ DRV_MSG_CODE_UNLOAD_SKIP_LINK_RESET);
if (!rc) {
BNX2X_ERR("MCP response failure, aborting\n");
return -EBUSY;
@@ -11005,7 +11015,7 @@
struct bnx2x *bp = netdev_priv(dev);
/* Unload the driver, release IRQs */
- bnx2x_nic_unload(bp, UNLOAD_CLOSE);
+ bnx2x_nic_unload(bp, UNLOAD_CLOSE, false);
/* Power off */
bnx2x_set_power_state(bp, PCI_D3hot);