staging: brcm80211: Move sdiod strength init to dhd_sdio.c
Move si_sdiod_drive_strength_init to dhd_sdio and rename to
dhdsdio_sdiod_drive_strength_init for dhd_pmu.c removal
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
diff --git a/drivers/staging/brcm80211/brcmfmac/dhd_sdio.c b/drivers/staging/brcm80211/brcmfmac/dhd_sdio.c
index 2827af2..e2d5aa5 100644
--- a/drivers/staging/brcm80211/brcmfmac/dhd_sdio.c
+++ b/drivers/staging/brcm80211/brcmfmac/dhd_sdio.c
@@ -485,6 +485,8 @@
static void dhdsdio_chip_disablecore(bcmsdh_info_t *sdh, u32 corebase);
static int dhdsdio_chip_attach(struct dhd_bus *bus, void *regs);
static void dhdsdio_chip_resetcore(bcmsdh_info_t *sdh, u32 corebase);
+static void dhdsdio_sdiod_drive_strength_init(struct dhd_bus *bus,
+ u32 drivestrength);
static void dhd_dongle_setmemsize(struct dhd_bus *bus, int mem_size)
{
@@ -2292,7 +2294,7 @@
case IOV_SVAL(IOV_SDIOD_DRIVE):
dhd_sdiod_drive_strength = int_val;
- si_sdiod_drive_strength_init(bus->sih,
+ dhdsdio_sdiod_drive_strength_init(bus,
dhd_sdiod_drive_strength);
break;
@@ -5270,7 +5272,7 @@
goto fail;
}
- si_sdiod_drive_strength_init(bus->sih, dhd_sdiod_drive_strength);
+ dhdsdio_sdiod_drive_strength_init(bus, dhd_sdiod_drive_strength);
/* Get info on the ARM and SOCRAM cores... */
if (!DHD_NOPMU(bus)) {
@@ -6316,3 +6318,111 @@
(SICF_CLOCK_EN << SBTML_SICF_SHIFT));
udelay(1);
}
+
+/* SDIO Pad drive strength to select value mappings */
+struct sdiod_drive_str {
+ u8 strength; /* Pad Drive Strength in mA */
+ u8 sel; /* Chip-specific select value */
+};
+
+/* SDIO Drive Strength to sel value table for PMU Rev 1 */
+static const struct sdiod_drive_str sdiod_drive_strength_tab1[] = {
+ {
+ 4, 0x2}, {
+ 2, 0x3}, {
+ 1, 0x0}, {
+ 0, 0x0}
+ };
+
+/* SDIO Drive Strength to sel value table for PMU Rev 2, 3 */
+static const struct sdiod_drive_str sdiod_drive_strength_tab2[] = {
+ {
+ 12, 0x7}, {
+ 10, 0x6}, {
+ 8, 0x5}, {
+ 6, 0x4}, {
+ 4, 0x2}, {
+ 2, 0x1}, {
+ 0, 0x0}
+ };
+
+/* SDIO Drive Strength to sel value table for PMU Rev 8 (1.8V) */
+static const struct sdiod_drive_str sdiod_drive_strength_tab3[] = {
+ {
+ 32, 0x7}, {
+ 26, 0x6}, {
+ 22, 0x5}, {
+ 16, 0x4}, {
+ 12, 0x3}, {
+ 8, 0x2}, {
+ 4, 0x1}, {
+ 0, 0x0}
+ };
+
+#define SDIOD_DRVSTR_KEY(chip, pmu) (((chip) << 16) | (pmu))
+
+static void
+dhdsdio_sdiod_drive_strength_init(struct dhd_bus *bus, u32 drivestrength) {
+ struct sdiod_drive_str *str_tab = NULL;
+ u32 str_mask = 0;
+ u32 str_shift = 0;
+#ifdef BCMDBG
+ char chn[8];
+#endif
+
+ if (!(bus->ci->cccaps & CC_CAP_PMU))
+ return;
+
+ switch (SDIOD_DRVSTR_KEY(bus->ci->chip, bus->ci->pmurev)) {
+ case SDIOD_DRVSTR_KEY(BCM4325_CHIP_ID, 1):
+ str_tab = (struct sdiod_drive_str *)&sdiod_drive_strength_tab1;
+ str_mask = 0x30000000;
+ str_shift = 28;
+ break;
+ case SDIOD_DRVSTR_KEY(BCM4325_CHIP_ID, 2):
+ case SDIOD_DRVSTR_KEY(BCM4325_CHIP_ID, 3):
+ str_tab = (struct sdiod_drive_str *)&sdiod_drive_strength_tab2;
+ str_mask = 0x00003800;
+ str_shift = 11;
+ break;
+ case SDIOD_DRVSTR_KEY(BCM4336_CHIP_ID, 8):
+ str_tab = (struct sdiod_drive_str *)&sdiod_drive_strength_tab3;
+ str_mask = 0x00003800;
+ str_shift = 11;
+ break;
+ default:
+ DHD_ERROR(("No SDIO Drive strength init"
+ "done for chip %s rev %d pmurev %d\n",
+ bcm_chipname(bus->ci->chip, chn, 8),
+ bus->ci->chiprev, bus->ci->pmurev));
+ break;
+ }
+
+ if (str_tab != NULL) {
+ u32 drivestrength_sel = 0;
+ u32 cc_data_temp;
+ int i;
+
+ for (i = 0; str_tab[i].strength != 0; i++) {
+ if (drivestrength >= str_tab[i].strength) {
+ drivestrength_sel = str_tab[i].sel;
+ break;
+ }
+ }
+
+ bcmsdh_reg_write(bus->sdh,
+ CORE_CC_REG(bus->ci->cccorebase, chipcontrol_addr),
+ 4, 1);
+ cc_data_temp = bcmsdh_reg_read(bus->sdh,
+ CORE_CC_REG(bus->ci->cccorebase, chipcontrol_addr), 4);
+ cc_data_temp &= ~str_mask;
+ drivestrength_sel <<= str_shift;
+ cc_data_temp |= drivestrength_sel;
+ bcmsdh_reg_write(bus->sdh,
+ CORE_CC_REG(bus->ci->cccorebase, chipcontrol_addr),
+ 4, cc_data_temp);
+
+ DHD_INFO(("SDIO: %dmA drive strength selected, set to 0x%08x\n",
+ drivestrength, cc_data_temp));
+ }
+}