| /** |
| * This file contains the major functions in WLAN |
| * driver. It includes init, exit, open, close and main |
| * thread etc.. |
| */ |
| |
| #include <linux/moduleparam.h> |
| #include <linux/delay.h> |
| #include <linux/etherdevice.h> |
| #include <linux/netdevice.h> |
| #include <linux/if_arp.h> |
| #include <linux/kthread.h> |
| |
| #include <net/iw_handler.h> |
| #include <net/ieee80211.h> |
| |
| #include "host.h" |
| #include "decl.h" |
| #include "dev.h" |
| #include "wext.h" |
| #include "debugfs.h" |
| #include "assoc.h" |
| #include "join.h" |
| #include "cmd.h" |
| |
| #define DRIVER_RELEASE_VERSION "323.p0" |
| const char lbs_driver_version[] = "COMM-USB8388-" DRIVER_RELEASE_VERSION |
| #ifdef DEBUG |
| "-dbg" |
| #endif |
| ""; |
| |
| |
| /* Module parameters */ |
| unsigned int lbs_debug; |
| EXPORT_SYMBOL_GPL(lbs_debug); |
| module_param_named(libertas_debug, lbs_debug, int, 0644); |
| |
| |
| #define LBS_TX_PWR_DEFAULT 20 /*100mW */ |
| #define LBS_TX_PWR_US_DEFAULT 20 /*100mW */ |
| #define LBS_TX_PWR_JP_DEFAULT 16 /*50mW */ |
| #define LBS_TX_PWR_FR_DEFAULT 20 /*100mW */ |
| #define LBS_TX_PWR_EMEA_DEFAULT 20 /*100mW */ |
| |
| /* Format { channel, frequency (MHz), maxtxpower } */ |
| /* band: 'B/G', region: USA FCC/Canada IC */ |
| static struct chan_freq_power channel_freq_power_US_BG[] = { |
| {1, 2412, LBS_TX_PWR_US_DEFAULT}, |
| {2, 2417, LBS_TX_PWR_US_DEFAULT}, |
| {3, 2422, LBS_TX_PWR_US_DEFAULT}, |
| {4, 2427, LBS_TX_PWR_US_DEFAULT}, |
| {5, 2432, LBS_TX_PWR_US_DEFAULT}, |
| {6, 2437, LBS_TX_PWR_US_DEFAULT}, |
| {7, 2442, LBS_TX_PWR_US_DEFAULT}, |
| {8, 2447, LBS_TX_PWR_US_DEFAULT}, |
| {9, 2452, LBS_TX_PWR_US_DEFAULT}, |
| {10, 2457, LBS_TX_PWR_US_DEFAULT}, |
| {11, 2462, LBS_TX_PWR_US_DEFAULT} |
| }; |
| |
| /* band: 'B/G', region: Europe ETSI */ |
| static struct chan_freq_power channel_freq_power_EU_BG[] = { |
| {1, 2412, LBS_TX_PWR_EMEA_DEFAULT}, |
| {2, 2417, LBS_TX_PWR_EMEA_DEFAULT}, |
| {3, 2422, LBS_TX_PWR_EMEA_DEFAULT}, |
| {4, 2427, LBS_TX_PWR_EMEA_DEFAULT}, |
| {5, 2432, LBS_TX_PWR_EMEA_DEFAULT}, |
| {6, 2437, LBS_TX_PWR_EMEA_DEFAULT}, |
| {7, 2442, LBS_TX_PWR_EMEA_DEFAULT}, |
| {8, 2447, LBS_TX_PWR_EMEA_DEFAULT}, |
| {9, 2452, LBS_TX_PWR_EMEA_DEFAULT}, |
| {10, 2457, LBS_TX_PWR_EMEA_DEFAULT}, |
| {11, 2462, LBS_TX_PWR_EMEA_DEFAULT}, |
| {12, 2467, LBS_TX_PWR_EMEA_DEFAULT}, |
| {13, 2472, LBS_TX_PWR_EMEA_DEFAULT} |
| }; |
| |
| /* band: 'B/G', region: Spain */ |
| static struct chan_freq_power channel_freq_power_SPN_BG[] = { |
| {10, 2457, LBS_TX_PWR_DEFAULT}, |
| {11, 2462, LBS_TX_PWR_DEFAULT} |
| }; |
| |
| /* band: 'B/G', region: France */ |
| static struct chan_freq_power channel_freq_power_FR_BG[] = { |
| {10, 2457, LBS_TX_PWR_FR_DEFAULT}, |
| {11, 2462, LBS_TX_PWR_FR_DEFAULT}, |
| {12, 2467, LBS_TX_PWR_FR_DEFAULT}, |
| {13, 2472, LBS_TX_PWR_FR_DEFAULT} |
| }; |
| |
| /* band: 'B/G', region: Japan */ |
| static struct chan_freq_power channel_freq_power_JPN_BG[] = { |
| {1, 2412, LBS_TX_PWR_JP_DEFAULT}, |
| {2, 2417, LBS_TX_PWR_JP_DEFAULT}, |
| {3, 2422, LBS_TX_PWR_JP_DEFAULT}, |
| {4, 2427, LBS_TX_PWR_JP_DEFAULT}, |
| {5, 2432, LBS_TX_PWR_JP_DEFAULT}, |
| {6, 2437, LBS_TX_PWR_JP_DEFAULT}, |
| {7, 2442, LBS_TX_PWR_JP_DEFAULT}, |
| {8, 2447, LBS_TX_PWR_JP_DEFAULT}, |
| {9, 2452, LBS_TX_PWR_JP_DEFAULT}, |
| {10, 2457, LBS_TX_PWR_JP_DEFAULT}, |
| {11, 2462, LBS_TX_PWR_JP_DEFAULT}, |
| {12, 2467, LBS_TX_PWR_JP_DEFAULT}, |
| {13, 2472, LBS_TX_PWR_JP_DEFAULT}, |
| {14, 2484, LBS_TX_PWR_JP_DEFAULT} |
| }; |
| |
| /** |
| * the structure for channel, frequency and power |
| */ |
| struct region_cfp_table { |
| u8 region; |
| struct chan_freq_power *cfp_BG; |
| int cfp_no_BG; |
| }; |
| |
| /** |
| * the structure for the mapping between region and CFP |
| */ |
| static struct region_cfp_table region_cfp_table[] = { |
| {0x10, /*US FCC */ |
| channel_freq_power_US_BG, |
| ARRAY_SIZE(channel_freq_power_US_BG), |
| } |
| , |
| {0x20, /*CANADA IC */ |
| channel_freq_power_US_BG, |
| ARRAY_SIZE(channel_freq_power_US_BG), |
| } |
| , |
| {0x30, /*EU*/ channel_freq_power_EU_BG, |
| ARRAY_SIZE(channel_freq_power_EU_BG), |
| } |
| , |
| {0x31, /*SPAIN*/ channel_freq_power_SPN_BG, |
| ARRAY_SIZE(channel_freq_power_SPN_BG), |
| } |
| , |
| {0x32, /*FRANCE*/ channel_freq_power_FR_BG, |
| ARRAY_SIZE(channel_freq_power_FR_BG), |
| } |
| , |
| {0x40, /*JAPAN*/ channel_freq_power_JPN_BG, |
| ARRAY_SIZE(channel_freq_power_JPN_BG), |
| } |
| , |
| /*Add new region here */ |
| }; |
| |
| /** |
| * the table to keep region code |
| */ |
| u16 lbs_region_code_to_index[MRVDRV_MAX_REGION_CODE] = |
| { 0x10, 0x20, 0x30, 0x31, 0x32, 0x40 }; |
| |
| /** |
| * 802.11b/g supported bitrates (in 500Kb/s units) |
| */ |
| u8 lbs_bg_rates[MAX_RATES] = |
| { 0x02, 0x04, 0x0b, 0x16, 0x0c, 0x12, 0x18, 0x24, 0x30, 0x48, 0x60, 0x6c, |
| 0x00, 0x00 }; |
| |
| /** |
| * FW rate table. FW refers to rates by their index in this table, not by the |
| * rate value itself. Values of 0x00 are |
| * reserved positions. |
| */ |
| static u8 fw_data_rates[MAX_RATES] = |
| { 0x02, 0x04, 0x0B, 0x16, 0x00, 0x0C, 0x12, |
| 0x18, 0x24, 0x30, 0x48, 0x60, 0x6C, 0x00 |
| }; |
| |
| /** |
| * @brief use index to get the data rate |
| * |
| * @param idx The index of data rate |
| * @return data rate or 0 |
| */ |
| u32 lbs_fw_index_to_data_rate(u8 idx) |
| { |
| if (idx >= sizeof(fw_data_rates)) |
| idx = 0; |
| return fw_data_rates[idx]; |
| } |
| |
| /** |
| * @brief use rate to get the index |
| * |
| * @param rate data rate |
| * @return index or 0 |
| */ |
| u8 lbs_data_rate_to_fw_index(u32 rate) |
| { |
| u8 i; |
| |
| if (!rate) |
| return 0; |
| |
| for (i = 0; i < sizeof(fw_data_rates); i++) { |
| if (rate == fw_data_rates[i]) |
| return i; |
| } |
| return 0; |
| } |
| |
| /** |
| * Attributes exported through sysfs |
| */ |
| |
| /** |
| * @brief Get function for sysfs attribute anycast_mask |
| */ |
| static ssize_t lbs_anycast_get(struct device *dev, |
| struct device_attribute *attr, char * buf) |
| { |
| struct lbs_private *priv = to_net_dev(dev)->priv; |
| struct cmd_ds_mesh_access mesh_access; |
| int ret; |
| |
| memset(&mesh_access, 0, sizeof(mesh_access)); |
| |
| ret = lbs_mesh_access(priv, CMD_ACT_MESH_GET_ANYCAST, &mesh_access); |
| if (ret) |
| return ret; |
| |
| return snprintf(buf, 12, "0x%X\n", le32_to_cpu(mesh_access.data[0])); |
| } |
| |
| /** |
| * @brief Set function for sysfs attribute anycast_mask |
| */ |
| static ssize_t lbs_anycast_set(struct device *dev, |
| struct device_attribute *attr, const char * buf, size_t count) |
| { |
| struct lbs_private *priv = to_net_dev(dev)->priv; |
| struct cmd_ds_mesh_access mesh_access; |
| uint32_t datum; |
| int ret; |
| |
| memset(&mesh_access, 0, sizeof(mesh_access)); |
| sscanf(buf, "%x", &datum); |
| mesh_access.data[0] = cpu_to_le32(datum); |
| |
| ret = lbs_mesh_access(priv, CMD_ACT_MESH_SET_ANYCAST, &mesh_access); |
| if (ret) |
| return ret; |
| |
| return strlen(buf); |
| } |
| |
| static int lbs_add_rtap(struct lbs_private *priv); |
| static void lbs_remove_rtap(struct lbs_private *priv); |
| static int lbs_add_mesh(struct lbs_private *priv); |
| static void lbs_remove_mesh(struct lbs_private *priv); |
| |
| |
| /** |
| * Get function for sysfs attribute rtap |
| */ |
| static ssize_t lbs_rtap_get(struct device *dev, |
| struct device_attribute *attr, char * buf) |
| { |
| struct lbs_private *priv = to_net_dev(dev)->priv; |
| return snprintf(buf, 5, "0x%X\n", priv->monitormode); |
| } |
| |
| /** |
| * Set function for sysfs attribute rtap |
| */ |
| static ssize_t lbs_rtap_set(struct device *dev, |
| struct device_attribute *attr, const char * buf, size_t count) |
| { |
| int monitor_mode; |
| struct lbs_private *priv = to_net_dev(dev)->priv; |
| |
| sscanf(buf, "%x", &monitor_mode); |
| if (monitor_mode != LBS_MONITOR_OFF) { |
| if(priv->monitormode == monitor_mode) |
| return strlen(buf); |
| if (priv->monitormode == LBS_MONITOR_OFF) { |
| if (priv->infra_open || priv->mesh_open) |
| return -EBUSY; |
| if (priv->mode == IW_MODE_INFRA) |
| lbs_send_deauthentication(priv); |
| else if (priv->mode == IW_MODE_ADHOC) |
| lbs_stop_adhoc_network(priv); |
| lbs_add_rtap(priv); |
| } |
| priv->monitormode = monitor_mode; |
| } |
| |
| else { |
| if (priv->monitormode == LBS_MONITOR_OFF) |
| return strlen(buf); |
| priv->monitormode = LBS_MONITOR_OFF; |
| lbs_remove_rtap(priv); |
| |
| if (priv->currenttxskb) { |
| dev_kfree_skb_any(priv->currenttxskb); |
| priv->currenttxskb = NULL; |
| } |
| |
| /* Wake queues, command thread, etc. */ |
| lbs_host_to_card_done(priv); |
| } |
| |
| lbs_prepare_and_send_command(priv, |
| CMD_802_11_MONITOR_MODE, CMD_ACT_SET, |
| CMD_OPTION_WAITFORRSP, 0, &priv->monitormode); |
| return strlen(buf); |
| } |
| |
| /** |
| * lbs_rtap attribute to be exported per ethX interface |
| * through sysfs (/sys/class/net/ethX/lbs_rtap) |
| */ |
| static DEVICE_ATTR(lbs_rtap, 0644, lbs_rtap_get, lbs_rtap_set ); |
| |
| /** |
| * Get function for sysfs attribute mesh |
| */ |
| static ssize_t lbs_mesh_get(struct device *dev, |
| struct device_attribute *attr, char * buf) |
| { |
| struct lbs_private *priv = to_net_dev(dev)->priv; |
| return snprintf(buf, 5, "0x%X\n", !!priv->mesh_dev); |
| } |
| |
| /** |
| * Set function for sysfs attribute mesh |
| */ |
| static ssize_t lbs_mesh_set(struct device *dev, |
| struct device_attribute *attr, const char * buf, size_t count) |
| { |
| struct lbs_private *priv = to_net_dev(dev)->priv; |
| int enable; |
| int ret; |
| |
| sscanf(buf, "%x", &enable); |
| enable = !!enable; |
| if (enable == !!priv->mesh_dev) |
| return count; |
| |
| ret = lbs_mesh_config(priv, enable, priv->curbssparams.channel); |
| if (ret) |
| return ret; |
| |
| if (enable) |
| lbs_add_mesh(priv); |
| else |
| lbs_remove_mesh(priv); |
| |
| return count; |
| } |
| |
| /** |
| * lbs_mesh attribute to be exported per ethX interface |
| * through sysfs (/sys/class/net/ethX/lbs_mesh) |
| */ |
| static DEVICE_ATTR(lbs_mesh, 0644, lbs_mesh_get, lbs_mesh_set); |
| |
| /** |
| * anycast_mask attribute to be exported per mshX interface |
| * through sysfs (/sys/class/net/mshX/anycast_mask) |
| */ |
| static DEVICE_ATTR(anycast_mask, 0644, lbs_anycast_get, lbs_anycast_set); |
| |
| static struct attribute *lbs_mesh_sysfs_entries[] = { |
| &dev_attr_anycast_mask.attr, |
| NULL, |
| }; |
| |
| static struct attribute_group lbs_mesh_attr_group = { |
| .attrs = lbs_mesh_sysfs_entries, |
| }; |
| |
| /** |
| * @brief This function opens the ethX or mshX interface |
| * |
| * @param dev A pointer to net_device structure |
| * @return 0 or -EBUSY if monitor mode active |
| */ |
| static int lbs_dev_open(struct net_device *dev) |
| { |
| struct lbs_private *priv = (struct lbs_private *) dev->priv ; |
| int ret = 0; |
| |
| lbs_deb_enter(LBS_DEB_NET); |
| |
| spin_lock_irq(&priv->driver_lock); |
| |
| if (priv->monitormode != LBS_MONITOR_OFF) { |
| ret = -EBUSY; |
| goto out; |
| } |
| |
| if (dev == priv->mesh_dev) { |
| priv->mesh_open = 1; |
| priv->mesh_connect_status = LBS_CONNECTED; |
| netif_carrier_on(dev); |
| } else { |
| priv->infra_open = 1; |
| |
| if (priv->connect_status == LBS_CONNECTED) |
| netif_carrier_on(dev); |
| else |
| netif_carrier_off(dev); |
| } |
| |
| if (!priv->tx_pending_len) |
| netif_wake_queue(dev); |
| out: |
| |
| spin_unlock_irq(&priv->driver_lock); |
| lbs_deb_leave_args(LBS_DEB_NET, "ret %d", ret); |
| return ret; |
| } |
| |
| /** |
| * @brief This function closes the mshX interface |
| * |
| * @param dev A pointer to net_device structure |
| * @return 0 |
| */ |
| static int lbs_mesh_stop(struct net_device *dev) |
| { |
| struct lbs_private *priv = (struct lbs_private *) (dev->priv); |
| |
| lbs_deb_enter(LBS_DEB_MESH); |
| spin_lock_irq(&priv->driver_lock); |
| |
| priv->mesh_open = 0; |
| priv->mesh_connect_status = LBS_DISCONNECTED; |
| |
| netif_stop_queue(dev); |
| netif_carrier_off(dev); |
| |
| spin_unlock_irq(&priv->driver_lock); |
| |
| lbs_deb_leave(LBS_DEB_MESH); |
| return 0; |
| } |
| |
| /** |
| * @brief This function closes the ethX interface |
| * |
| * @param dev A pointer to net_device structure |
| * @return 0 |
| */ |
| static int lbs_eth_stop(struct net_device *dev) |
| { |
| struct lbs_private *priv = (struct lbs_private *) dev->priv; |
| |
| lbs_deb_enter(LBS_DEB_NET); |
| |
| spin_lock_irq(&priv->driver_lock); |
| priv->infra_open = 0; |
| netif_stop_queue(dev); |
| spin_unlock_irq(&priv->driver_lock); |
| |
| lbs_deb_leave(LBS_DEB_NET); |
| return 0; |
| } |
| |
| static void lbs_tx_timeout(struct net_device *dev) |
| { |
| struct lbs_private *priv = (struct lbs_private *) dev->priv; |
| |
| lbs_deb_enter(LBS_DEB_TX); |
| |
| lbs_pr_err("tx watch dog timeout\n"); |
| |
| dev->trans_start = jiffies; |
| |
| if (priv->currenttxskb) { |
| priv->eventcause = 0x01000000; |
| lbs_send_tx_feedback(priv); |
| } |
| /* XX: Shouldn't we also call into the hw-specific driver |
| to kick it somehow? */ |
| lbs_host_to_card_done(priv); |
| |
| /* More often than not, this actually happens because the |
| firmware has crapped itself -- rather than just a very |
| busy medium. So send a harmless command, and if/when |
| _that_ times out, we'll kick it in the head. */ |
| lbs_prepare_and_send_command(priv, CMD_802_11_RSSI, 0, |
| 0, 0, NULL); |
| |
| lbs_deb_leave(LBS_DEB_TX); |
| } |
| |
| void lbs_host_to_card_done(struct lbs_private *priv) |
| { |
| unsigned long flags; |
| |
| lbs_deb_enter(LBS_DEB_THREAD); |
| |
| spin_lock_irqsave(&priv->driver_lock, flags); |
| |
| priv->dnld_sent = DNLD_RES_RECEIVED; |
| |
| /* Wake main thread if commands are pending */ |
| if (!priv->cur_cmd || priv->tx_pending_len > 0) |
| wake_up_interruptible(&priv->waitq); |
| |
| spin_unlock_irqrestore(&priv->driver_lock, flags); |
| lbs_deb_leave(LBS_DEB_THREAD); |
| } |
| EXPORT_SYMBOL_GPL(lbs_host_to_card_done); |
| |
| /** |
| * @brief This function returns the network statistics |
| * |
| * @param dev A pointer to struct lbs_private structure |
| * @return A pointer to net_device_stats structure |
| */ |
| static struct net_device_stats *lbs_get_stats(struct net_device *dev) |
| { |
| struct lbs_private *priv = (struct lbs_private *) dev->priv; |
| |
| lbs_deb_enter(LBS_DEB_NET); |
| return &priv->stats; |
| } |
| |
| static int lbs_set_mac_address(struct net_device *dev, void *addr) |
| { |
| int ret = 0; |
| struct lbs_private *priv = (struct lbs_private *) dev->priv; |
| struct sockaddr *phwaddr = addr; |
| |
| lbs_deb_enter(LBS_DEB_NET); |
| |
| /* In case it was called from the mesh device */ |
| dev = priv->dev ; |
| |
| memset(priv->current_addr, 0, ETH_ALEN); |
| |
| /* dev->dev_addr is 8 bytes */ |
| lbs_deb_hex(LBS_DEB_NET, "dev->dev_addr", dev->dev_addr, ETH_ALEN); |
| |
| lbs_deb_hex(LBS_DEB_NET, "addr", phwaddr->sa_data, ETH_ALEN); |
| memcpy(priv->current_addr, phwaddr->sa_data, ETH_ALEN); |
| |
| ret = lbs_prepare_and_send_command(priv, CMD_802_11_MAC_ADDRESS, |
| CMD_ACT_SET, |
| CMD_OPTION_WAITFORRSP, 0, NULL); |
| |
| if (ret) { |
| lbs_deb_net("set MAC address failed\n"); |
| ret = -1; |
| goto done; |
| } |
| |
| lbs_deb_hex(LBS_DEB_NET, "priv->macaddr", priv->current_addr, ETH_ALEN); |
| memcpy(dev->dev_addr, priv->current_addr, ETH_ALEN); |
| if (priv->mesh_dev) |
| memcpy(priv->mesh_dev->dev_addr, priv->current_addr, ETH_ALEN); |
| |
| done: |
| lbs_deb_leave_args(LBS_DEB_NET, "ret %d", ret); |
| return ret; |
| } |
| |
| static int lbs_copy_multicast_address(struct lbs_private *priv, |
| struct net_device *dev) |
| { |
| int i = 0; |
| struct dev_mc_list *mcptr = dev->mc_list; |
| |
| for (i = 0; i < dev->mc_count; i++) { |
| memcpy(&priv->multicastlist[i], mcptr->dmi_addr, ETH_ALEN); |
| mcptr = mcptr->next; |
| } |
| return i; |
| } |
| |
| static void lbs_set_multicast_list(struct net_device *dev) |
| { |
| struct lbs_private *priv = dev->priv; |
| int oldpacketfilter; |
| DECLARE_MAC_BUF(mac); |
| |
| lbs_deb_enter(LBS_DEB_NET); |
| |
| oldpacketfilter = priv->currentpacketfilter; |
| |
| if (dev->flags & IFF_PROMISC) { |
| lbs_deb_net("enable promiscuous mode\n"); |
| priv->currentpacketfilter |= |
| CMD_ACT_MAC_PROMISCUOUS_ENABLE; |
| priv->currentpacketfilter &= |
| ~(CMD_ACT_MAC_ALL_MULTICAST_ENABLE | |
| CMD_ACT_MAC_MULTICAST_ENABLE); |
| } else { |
| /* Multicast */ |
| priv->currentpacketfilter &= |
| ~CMD_ACT_MAC_PROMISCUOUS_ENABLE; |
| |
| if (dev->flags & IFF_ALLMULTI || dev->mc_count > |
| MRVDRV_MAX_MULTICAST_LIST_SIZE) { |
| lbs_deb_net( "enabling all multicast\n"); |
| priv->currentpacketfilter |= |
| CMD_ACT_MAC_ALL_MULTICAST_ENABLE; |
| priv->currentpacketfilter &= |
| ~CMD_ACT_MAC_MULTICAST_ENABLE; |
| } else { |
| priv->currentpacketfilter &= |
| ~CMD_ACT_MAC_ALL_MULTICAST_ENABLE; |
| |
| if (!dev->mc_count) { |
| lbs_deb_net("no multicast addresses, " |
| "disabling multicast\n"); |
| priv->currentpacketfilter &= |
| ~CMD_ACT_MAC_MULTICAST_ENABLE; |
| } else { |
| int i; |
| |
| priv->currentpacketfilter |= |
| CMD_ACT_MAC_MULTICAST_ENABLE; |
| |
| priv->nr_of_multicastmacaddr = |
| lbs_copy_multicast_address(priv, dev); |
| |
| lbs_deb_net("multicast addresses: %d\n", |
| dev->mc_count); |
| |
| for (i = 0; i < dev->mc_count; i++) { |
| lbs_deb_net("Multicast address %d: %s\n", |
| i, print_mac(mac, |
| priv->multicastlist[i])); |
| } |
| /* send multicast addresses to firmware */ |
| lbs_prepare_and_send_command(priv, |
| CMD_MAC_MULTICAST_ADR, |
| CMD_ACT_SET, 0, 0, |
| NULL); |
| } |
| } |
| } |
| |
| if (priv->currentpacketfilter != oldpacketfilter) { |
| lbs_set_mac_packet_filter(priv); |
| } |
| |
| lbs_deb_leave(LBS_DEB_NET); |
| } |
| |
| /** |
| * @brief This function handles the major jobs in the LBS driver. |
| * It handles all events generated by firmware, RX data received |
| * from firmware and TX data sent from kernel. |
| * |
| * @param data A pointer to lbs_thread structure |
| * @return 0 |
| */ |
| static int lbs_thread(void *data) |
| { |
| struct net_device *dev = data; |
| struct lbs_private *priv = dev->priv; |
| wait_queue_t wait; |
| u8 ireg = 0; |
| |
| lbs_deb_enter(LBS_DEB_THREAD); |
| |
| init_waitqueue_entry(&wait, current); |
| |
| for (;;) { |
| int shouldsleep; |
| |
| lbs_deb_thread( "main-thread 111: intcounter=%d currenttxskb=%p dnld_sent=%d\n", |
| priv->intcounter, priv->currenttxskb, priv->dnld_sent); |
| |
| add_wait_queue(&priv->waitq, &wait); |
| set_current_state(TASK_INTERRUPTIBLE); |
| spin_lock_irq(&priv->driver_lock); |
| |
| if (kthread_should_stop()) |
| shouldsleep = 0; /* Bye */ |
| else if (priv->surpriseremoved) |
| shouldsleep = 1; /* We need to wait until we're _told_ to die */ |
| else if (priv->psstate == PS_STATE_SLEEP) |
| shouldsleep = 1; /* Sleep mode. Nothing we can do till it wakes */ |
| else if (priv->intcounter) |
| shouldsleep = 0; /* Interrupt pending. Deal with it now */ |
| else if (priv->cmd_timed_out) |
| shouldsleep = 0; /* Command timed out. Recover */ |
| else if (!priv->fw_ready) |
| shouldsleep = 1; /* Firmware not ready. We're waiting for it */ |
| else if (priv->dnld_sent) |
| shouldsleep = 1; /* Something is en route to the device already */ |
| else if (priv->tx_pending_len > 0) |
| shouldsleep = 0; /* We've a packet to send */ |
| else if (priv->cur_cmd) |
| shouldsleep = 1; /* Can't send a command; one already running */ |
| else if (!list_empty(&priv->cmdpendingq)) |
| shouldsleep = 0; /* We have a command to send */ |
| else |
| shouldsleep = 1; /* No command */ |
| |
| if (shouldsleep) { |
| lbs_deb_thread("main-thread sleeping... Conn=%d IntC=%d PS_mode=%d PS_State=%d\n", |
| priv->connect_status, priv->intcounter, |
| priv->psmode, priv->psstate); |
| spin_unlock_irq(&priv->driver_lock); |
| schedule(); |
| } else |
| spin_unlock_irq(&priv->driver_lock); |
| |
| lbs_deb_thread("main-thread 222 (waking up): intcounter=%d currenttxskb=%p dnld_sent=%d\n", |
| priv->intcounter, priv->currenttxskb, priv->dnld_sent); |
| |
| set_current_state(TASK_RUNNING); |
| remove_wait_queue(&priv->waitq, &wait); |
| |
| lbs_deb_thread("main-thread 333: intcounter=%d currenttxskb=%p dnld_sent=%d\n", |
| priv->intcounter, priv->currenttxskb, priv->dnld_sent); |
| |
| if (kthread_should_stop()) { |
| lbs_deb_thread("main-thread: break from main thread\n"); |
| break; |
| } |
| |
| if (priv->surpriseremoved) { |
| lbs_deb_thread("adapter removed; waiting to die...\n"); |
| continue; |
| } |
| |
| spin_lock_irq(&priv->driver_lock); |
| |
| if (priv->intcounter) { |
| u8 int_status; |
| |
| priv->intcounter = 0; |
| int_status = priv->hw_get_int_status(priv, &ireg); |
| |
| if (int_status) { |
| lbs_deb_thread("main-thread: reading HOST_INT_STATUS_REG failed\n"); |
| spin_unlock_irq(&priv->driver_lock); |
| continue; |
| } |
| priv->hisregcpy |= ireg; |
| } |
| |
| lbs_deb_thread("main-thread 444: intcounter=%d currenttxskb=%p dnld_sent=%d\n", |
| priv->intcounter, priv->currenttxskb, priv->dnld_sent); |
| |
| /* command response? */ |
| if (priv->hisregcpy & MRVDRV_CMD_UPLD_RDY) { |
| lbs_deb_thread("main-thread: cmd response ready\n"); |
| |
| priv->hisregcpy &= ~MRVDRV_CMD_UPLD_RDY; |
| spin_unlock_irq(&priv->driver_lock); |
| lbs_process_rx_command(priv); |
| spin_lock_irq(&priv->driver_lock); |
| } |
| |
| if (priv->cmd_timed_out && priv->cur_cmd) { |
| struct cmd_ctrl_node *cmdnode = priv->cur_cmd; |
| |
| if (++priv->nr_retries > 10) { |
| lbs_pr_info("Excessive timeouts submitting command %x\n", |
| le16_to_cpu(cmdnode->cmdbuf->command)); |
| lbs_complete_command(priv, cmdnode, -ETIMEDOUT); |
| priv->nr_retries = 0; |
| } else { |
| priv->cur_cmd = NULL; |
| lbs_pr_info("requeueing command %x due to timeout (#%d)\n", |
| le16_to_cpu(cmdnode->cmdbuf->command), priv->nr_retries); |
| |
| /* Stick it back at the _top_ of the pending queue |
| for immediate resubmission */ |
| list_add(&cmdnode->list, &priv->cmdpendingq); |
| } |
| } |
| priv->cmd_timed_out = 0; |
| |
| /* Any Card Event */ |
| if (priv->hisregcpy & MRVDRV_CARDEVENT) { |
| lbs_deb_thread("main-thread: Card Event Activity\n"); |
| |
| priv->hisregcpy &= ~MRVDRV_CARDEVENT; |
| |
| if (priv->hw_read_event_cause(priv)) { |
| lbs_pr_alert("main-thread: hw_read_event_cause failed\n"); |
| spin_unlock_irq(&priv->driver_lock); |
| continue; |
| } |
| spin_unlock_irq(&priv->driver_lock); |
| lbs_process_event(priv); |
| } else |
| spin_unlock_irq(&priv->driver_lock); |
| |
| if (!priv->fw_ready) |
| continue; |
| |
| /* Check if we need to confirm Sleep Request received previously */ |
| if (priv->psstate == PS_STATE_PRE_SLEEP && |
| !priv->dnld_sent && !priv->cur_cmd) { |
| if (priv->connect_status == LBS_CONNECTED) { |
| lbs_deb_thread("main_thread: PRE_SLEEP--intcounter=%d currenttxskb=%p dnld_sent=%d cur_cmd=%p, confirm now\n", |
| priv->intcounter, priv->currenttxskb, priv->dnld_sent, priv->cur_cmd); |
| |
| lbs_ps_confirm_sleep(priv, (u16) priv->psmode); |
| } else { |
| /* workaround for firmware sending |
| * deauth/linkloss event immediately |
| * after sleep request; remove this |
| * after firmware fixes it |
| */ |
| priv->psstate = PS_STATE_AWAKE; |
| lbs_pr_alert("main-thread: ignore PS_SleepConfirm in non-connected state\n"); |
| } |
| } |
| |
| /* The PS state is changed during processing of Sleep Request |
| * event above |
| */ |
| if ((priv->psstate == PS_STATE_SLEEP) || |
| (priv->psstate == PS_STATE_PRE_SLEEP)) |
| continue; |
| |
| /* Execute the next command */ |
| if (!priv->dnld_sent && !priv->cur_cmd) |
| lbs_execute_next_command(priv); |
| |
| /* Wake-up command waiters which can't sleep in |
| * lbs_prepare_and_send_command |
| */ |
| if (!list_empty(&priv->cmdpendingq)) |
| wake_up_all(&priv->cmd_pending); |
| |
| spin_lock_irq(&priv->driver_lock); |
| if (!priv->dnld_sent && priv->tx_pending_len > 0) { |
| int ret = priv->hw_host_to_card(priv, MVMS_DAT, |
| priv->tx_pending_buf, |
| priv->tx_pending_len); |
| if (ret) { |
| lbs_deb_tx("host_to_card failed %d\n", ret); |
| priv->dnld_sent = DNLD_RES_RECEIVED; |
| } |
| priv->tx_pending_len = 0; |
| if (!priv->currenttxskb) { |
| /* We can wake the queues immediately if we aren't |
| waiting for TX feedback */ |
| if (priv->connect_status == LBS_CONNECTED) |
| netif_wake_queue(priv->dev); |
| if (priv->mesh_dev && |
| priv->mesh_connect_status == LBS_CONNECTED) |
| netif_wake_queue(priv->mesh_dev); |
| } |
| } |
| spin_unlock_irq(&priv->driver_lock); |
| } |
| |
| del_timer(&priv->command_timer); |
| wake_up_all(&priv->cmd_pending); |
| |
| lbs_deb_leave(LBS_DEB_THREAD); |
| return 0; |
| } |
| |
| static int lbs_suspend_callback(struct lbs_private *priv, unsigned long dummy, |
| struct cmd_header *cmd) |
| { |
| lbs_deb_enter(LBS_DEB_FW); |
| |
| netif_device_detach(priv->dev); |
| if (priv->mesh_dev) |
| netif_device_detach(priv->mesh_dev); |
| |
| priv->fw_ready = 0; |
| lbs_deb_leave(LBS_DEB_FW); |
| return 0; |
| } |
| |
| int lbs_suspend(struct lbs_private *priv) |
| { |
| struct cmd_header cmd; |
| int ret; |
| |
| lbs_deb_enter(LBS_DEB_FW); |
| |
| if (priv->wol_criteria == 0xffffffff) { |
| lbs_pr_info("Suspend attempt without configuring wake params!\n"); |
| return -EINVAL; |
| } |
| |
| memset(&cmd, 0, sizeof(cmd)); |
| |
| ret = __lbs_cmd(priv, CMD_802_11_HOST_SLEEP_ACTIVATE, &cmd, |
| sizeof(cmd), lbs_suspend_callback, 0); |
| if (ret) |
| lbs_pr_info("HOST_SLEEP_ACTIVATE failed: %d\n", ret); |
| |
| lbs_deb_leave_args(LBS_DEB_FW, "ret %d", ret); |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(lbs_suspend); |
| |
| int lbs_resume(struct lbs_private *priv) |
| { |
| lbs_deb_enter(LBS_DEB_FW); |
| |
| priv->fw_ready = 1; |
| |
| /* Firmware doesn't seem to give us RX packets any more |
| until we send it some command. Might as well update */ |
| lbs_prepare_and_send_command(priv, CMD_802_11_RSSI, 0, |
| 0, 0, NULL); |
| |
| netif_device_attach(priv->dev); |
| if (priv->mesh_dev) |
| netif_device_attach(priv->mesh_dev); |
| |
| lbs_deb_leave(LBS_DEB_FW); |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(lbs_resume); |
| |
| /** |
| * @brief This function downloads firmware image, gets |
| * HW spec from firmware and set basic parameters to |
| * firmware. |
| * |
| * @param priv A pointer to struct lbs_private structure |
| * @return 0 or -1 |
| */ |
| static int lbs_setup_firmware(struct lbs_private *priv) |
| { |
| int ret = -1; |
| |
| lbs_deb_enter(LBS_DEB_FW); |
| |
| /* |
| * Read MAC address from HW |
| */ |
| memset(priv->current_addr, 0xff, ETH_ALEN); |
| ret = lbs_update_hw_spec(priv); |
| if (ret) { |
| ret = -1; |
| goto done; |
| } |
| |
| lbs_set_mac_packet_filter(priv); |
| |
| ret = lbs_get_data_rate(priv); |
| if (ret < 0) { |
| ret = -1; |
| goto done; |
| } |
| |
| ret = 0; |
| done: |
| lbs_deb_leave_args(LBS_DEB_FW, "ret %d", ret); |
| return ret; |
| } |
| |
| /** |
| * This function handles the timeout of command sending. |
| * It will re-send the same command again. |
| */ |
| static void command_timer_fn(unsigned long data) |
| { |
| struct lbs_private *priv = (struct lbs_private *)data; |
| unsigned long flags; |
| |
| lbs_deb_enter(LBS_DEB_CMD); |
| spin_lock_irqsave(&priv->driver_lock, flags); |
| |
| if (!priv->cur_cmd) { |
| lbs_pr_info("Command timer expired; no pending command\n"); |
| goto out; |
| } |
| |
| lbs_pr_info("Command %x timed out\n", le16_to_cpu(priv->cur_cmd->cmdbuf->command)); |
| |
| priv->cmd_timed_out = 1; |
| wake_up_interruptible(&priv->waitq); |
| out: |
| spin_unlock_irqrestore(&priv->driver_lock, flags); |
| lbs_deb_leave(LBS_DEB_CMD); |
| } |
| |
| static int lbs_init_adapter(struct lbs_private *priv) |
| { |
| size_t bufsize; |
| int i, ret = 0; |
| |
| lbs_deb_enter(LBS_DEB_MAIN); |
| |
| /* Allocate buffer to store the BSSID list */ |
| bufsize = MAX_NETWORK_COUNT * sizeof(struct bss_descriptor); |
| priv->networks = kzalloc(bufsize, GFP_KERNEL); |
| if (!priv->networks) { |
| lbs_pr_err("Out of memory allocating beacons\n"); |
| ret = -1; |
| goto out; |
| } |
| |
| /* Initialize scan result lists */ |
| INIT_LIST_HEAD(&priv->network_free_list); |
| INIT_LIST_HEAD(&priv->network_list); |
| for (i = 0; i < MAX_NETWORK_COUNT; i++) { |
| list_add_tail(&priv->networks[i].list, |
| &priv->network_free_list); |
| } |
| |
| priv->lbs_ps_confirm_sleep.seqnum = cpu_to_le16(++priv->seqnum); |
| priv->lbs_ps_confirm_sleep.command = |
| cpu_to_le16(CMD_802_11_PS_MODE); |
| priv->lbs_ps_confirm_sleep.size = |
| cpu_to_le16(sizeof(struct PS_CMD_ConfirmSleep)); |
| priv->lbs_ps_confirm_sleep.action = |
| cpu_to_le16(CMD_SUBCMD_SLEEP_CONFIRMED); |
| |
| memset(priv->current_addr, 0xff, ETH_ALEN); |
| |
| priv->connect_status = LBS_DISCONNECTED; |
| priv->mesh_connect_status = LBS_DISCONNECTED; |
| priv->secinfo.auth_mode = IW_AUTH_ALG_OPEN_SYSTEM; |
| priv->mode = IW_MODE_INFRA; |
| priv->curbssparams.channel = DEFAULT_AD_HOC_CHANNEL; |
| priv->currentpacketfilter = CMD_ACT_MAC_RX_ON | CMD_ACT_MAC_TX_ON; |
| priv->radioon = RADIO_ON; |
| priv->auto_rate = 1; |
| priv->capability = WLAN_CAPABILITY_SHORT_PREAMBLE; |
| priv->psmode = LBS802_11POWERMODECAM; |
| priv->psstate = PS_STATE_FULL_POWER; |
| |
| mutex_init(&priv->lock); |
| |
| setup_timer(&priv->command_timer, command_timer_fn, |
| (unsigned long)priv); |
| |
| INIT_LIST_HEAD(&priv->cmdfreeq); |
| INIT_LIST_HEAD(&priv->cmdpendingq); |
| |
| spin_lock_init(&priv->driver_lock); |
| init_waitqueue_head(&priv->cmd_pending); |
| |
| /* Allocate the command buffers */ |
| if (lbs_allocate_cmd_buffer(priv)) { |
| lbs_pr_err("Out of memory allocating command buffers\n"); |
| ret = -1; |
| } |
| |
| out: |
| lbs_deb_leave_args(LBS_DEB_MAIN, "ret %d", ret); |
| |
| return ret; |
| } |
| |
| static void lbs_free_adapter(struct lbs_private *priv) |
| { |
| lbs_deb_enter(LBS_DEB_MAIN); |
| |
| lbs_free_cmd_buffer(priv); |
| del_timer(&priv->command_timer); |
| kfree(priv->networks); |
| priv->networks = NULL; |
| |
| lbs_deb_leave(LBS_DEB_MAIN); |
| } |
| |
| /** |
| * @brief This function adds the card. it will probe the |
| * card, allocate the lbs_priv and initialize the device. |
| * |
| * @param card A pointer to card |
| * @return A pointer to struct lbs_private structure |
| */ |
| struct lbs_private *lbs_add_card(void *card, struct device *dmdev) |
| { |
| struct net_device *dev = NULL; |
| struct lbs_private *priv = NULL; |
| |
| lbs_deb_enter(LBS_DEB_MAIN); |
| |
| /* Allocate an Ethernet device and register it */ |
| dev = alloc_etherdev(sizeof(struct lbs_private)); |
| if (!dev) { |
| lbs_pr_err("init ethX device failed\n"); |
| goto done; |
| } |
| priv = dev->priv; |
| |
| if (lbs_init_adapter(priv)) { |
| lbs_pr_err("failed to initialize adapter structure.\n"); |
| goto err_init_adapter; |
| } |
| |
| priv->dev = dev; |
| priv->card = card; |
| priv->mesh_open = 0; |
| priv->infra_open = 0; |
| |
| /* Setup the OS Interface to our functions */ |
| dev->open = lbs_dev_open; |
| dev->hard_start_xmit = lbs_hard_start_xmit; |
| dev->stop = lbs_eth_stop; |
| dev->set_mac_address = lbs_set_mac_address; |
| dev->tx_timeout = lbs_tx_timeout; |
| dev->get_stats = lbs_get_stats; |
| dev->watchdog_timeo = 5 * HZ; |
| dev->ethtool_ops = &lbs_ethtool_ops; |
| #ifdef WIRELESS_EXT |
| dev->wireless_handlers = (struct iw_handler_def *)&lbs_handler_def; |
| #endif |
| dev->flags |= IFF_BROADCAST | IFF_MULTICAST; |
| dev->set_multicast_list = lbs_set_multicast_list; |
| |
| SET_NETDEV_DEV(dev, dmdev); |
| |
| priv->rtap_net_dev = NULL; |
| |
| lbs_deb_thread("Starting main thread...\n"); |
| init_waitqueue_head(&priv->waitq); |
| priv->main_thread = kthread_run(lbs_thread, dev, "lbs_main"); |
| if (IS_ERR(priv->main_thread)) { |
| lbs_deb_thread("Error creating main thread.\n"); |
| goto err_init_adapter; |
| } |
| |
| priv->work_thread = create_singlethread_workqueue("lbs_worker"); |
| INIT_DELAYED_WORK(&priv->assoc_work, lbs_association_worker); |
| INIT_DELAYED_WORK(&priv->scan_work, lbs_scan_worker); |
| INIT_WORK(&priv->sync_channel, lbs_sync_channel); |
| |
| sprintf(priv->mesh_ssid, "mesh"); |
| priv->mesh_ssid_len = 4; |
| |
| priv->wol_criteria = 0xffffffff; |
| priv->wol_gpio = 0xff; |
| |
| goto done; |
| |
| err_init_adapter: |
| lbs_free_adapter(priv); |
| free_netdev(dev); |
| priv = NULL; |
| |
| done: |
| lbs_deb_leave_args(LBS_DEB_MAIN, "priv %p", priv); |
| return priv; |
| } |
| EXPORT_SYMBOL_GPL(lbs_add_card); |
| |
| |
| int lbs_remove_card(struct lbs_private *priv) |
| { |
| struct net_device *dev = priv->dev; |
| union iwreq_data wrqu; |
| |
| lbs_deb_enter(LBS_DEB_MAIN); |
| |
| lbs_remove_mesh(priv); |
| lbs_remove_rtap(priv); |
| |
| dev = priv->dev; |
| |
| cancel_delayed_work(&priv->scan_work); |
| cancel_delayed_work(&priv->assoc_work); |
| destroy_workqueue(priv->work_thread); |
| |
| if (priv->psmode == LBS802_11POWERMODEMAX_PSP) { |
| priv->psmode = LBS802_11POWERMODECAM; |
| lbs_ps_wakeup(priv, CMD_OPTION_WAITFORRSP); |
| } |
| |
| memset(wrqu.ap_addr.sa_data, 0xaa, ETH_ALEN); |
| wrqu.ap_addr.sa_family = ARPHRD_ETHER; |
| wireless_send_event(priv->dev, SIOCGIWAP, &wrqu, NULL); |
| |
| /* Stop the thread servicing the interrupts */ |
| priv->surpriseremoved = 1; |
| kthread_stop(priv->main_thread); |
| |
| lbs_free_adapter(priv); |
| |
| priv->dev = NULL; |
| free_netdev(dev); |
| |
| lbs_deb_leave(LBS_DEB_MAIN); |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(lbs_remove_card); |
| |
| |
| int lbs_start_card(struct lbs_private *priv) |
| { |
| struct net_device *dev = priv->dev; |
| int ret = -1; |
| |
| lbs_deb_enter(LBS_DEB_MAIN); |
| |
| /* poke the firmware */ |
| ret = lbs_setup_firmware(priv); |
| if (ret) |
| goto done; |
| |
| /* init 802.11d */ |
| lbs_init_11d(priv); |
| |
| if (register_netdev(dev)) { |
| lbs_pr_err("cannot register ethX device\n"); |
| goto done; |
| } |
| if (device_create_file(&dev->dev, &dev_attr_lbs_rtap)) |
| lbs_pr_err("cannot register lbs_rtap attribute\n"); |
| |
| lbs_update_channel(priv); |
| |
| /* 5.0.16p0 is known to NOT support any mesh */ |
| if (priv->fwrelease > 0x05001000) { |
| /* Enable mesh, if supported, and work out which TLV it uses. |
| 0x100 + 291 is an unofficial value used in 5.110.20.pXX |
| 0x100 + 37 is the official value used in 5.110.21.pXX |
| but we check them in that order because 20.pXX doesn't |
| give an error -- it just silently fails. */ |
| |
| /* 5.110.20.pXX firmware will fail the command if the channel |
| doesn't match the existing channel. But only if the TLV |
| is correct. If the channel is wrong, _BOTH_ versions will |
| give an error to 0x100+291, and allow 0x100+37 to succeed. |
| It's just that 5.110.20.pXX will not have done anything |
| useful */ |
| |
| priv->mesh_tlv = 0x100 + 291; |
| if (lbs_mesh_config(priv, 1, priv->curbssparams.channel)) { |
| priv->mesh_tlv = 0x100 + 37; |
| if (lbs_mesh_config(priv, 1, priv->curbssparams.channel)) |
| priv->mesh_tlv = 0; |
| } |
| if (priv->mesh_tlv) { |
| lbs_add_mesh(priv); |
| |
| if (device_create_file(&dev->dev, &dev_attr_lbs_mesh)) |
| lbs_pr_err("cannot register lbs_mesh attribute\n"); |
| } |
| } |
| |
| lbs_debugfs_init_one(priv, dev); |
| |
| lbs_pr_info("%s: Marvell WLAN 802.11 adapter\n", dev->name); |
| |
| ret = 0; |
| |
| done: |
| lbs_deb_leave_args(LBS_DEB_MAIN, "ret %d", ret); |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(lbs_start_card); |
| |
| |
| int lbs_stop_card(struct lbs_private *priv) |
| { |
| struct net_device *dev = priv->dev; |
| int ret = -1; |
| struct cmd_ctrl_node *cmdnode; |
| unsigned long flags; |
| |
| lbs_deb_enter(LBS_DEB_MAIN); |
| |
| netif_stop_queue(priv->dev); |
| netif_carrier_off(priv->dev); |
| |
| lbs_debugfs_remove_one(priv); |
| device_remove_file(&dev->dev, &dev_attr_lbs_rtap); |
| if (priv->mesh_tlv) |
| device_remove_file(&dev->dev, &dev_attr_lbs_mesh); |
| |
| /* Flush pending command nodes */ |
| spin_lock_irqsave(&priv->driver_lock, flags); |
| list_for_each_entry(cmdnode, &priv->cmdpendingq, list) { |
| cmdnode->result = -ENOENT; |
| cmdnode->cmdwaitqwoken = 1; |
| wake_up_interruptible(&cmdnode->cmdwait_q); |
| } |
| spin_unlock_irqrestore(&priv->driver_lock, flags); |
| |
| unregister_netdev(dev); |
| |
| lbs_deb_leave_args(LBS_DEB_MAIN, "ret %d", ret); |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(lbs_stop_card); |
| |
| |
| /** |
| * @brief This function adds mshX interface |
| * |
| * @param priv A pointer to the struct lbs_private structure |
| * @return 0 if successful, -X otherwise |
| */ |
| static int lbs_add_mesh(struct lbs_private *priv) |
| { |
| struct net_device *mesh_dev = NULL; |
| int ret = 0; |
| |
| lbs_deb_enter(LBS_DEB_MESH); |
| |
| /* Allocate a virtual mesh device */ |
| if (!(mesh_dev = alloc_netdev(0, "msh%d", ether_setup))) { |
| lbs_deb_mesh("init mshX device failed\n"); |
| ret = -ENOMEM; |
| goto done; |
| } |
| mesh_dev->priv = priv; |
| priv->mesh_dev = mesh_dev; |
| |
| mesh_dev->open = lbs_dev_open; |
| mesh_dev->hard_start_xmit = lbs_hard_start_xmit; |
| mesh_dev->stop = lbs_mesh_stop; |
| mesh_dev->get_stats = lbs_get_stats; |
| mesh_dev->set_mac_address = lbs_set_mac_address; |
| mesh_dev->ethtool_ops = &lbs_ethtool_ops; |
| memcpy(mesh_dev->dev_addr, priv->dev->dev_addr, |
| sizeof(priv->dev->dev_addr)); |
| |
| SET_NETDEV_DEV(priv->mesh_dev, priv->dev->dev.parent); |
| |
| #ifdef WIRELESS_EXT |
| mesh_dev->wireless_handlers = (struct iw_handler_def *)&mesh_handler_def; |
| #endif |
| /* Register virtual mesh interface */ |
| ret = register_netdev(mesh_dev); |
| if (ret) { |
| lbs_pr_err("cannot register mshX virtual interface\n"); |
| goto err_free; |
| } |
| |
| ret = sysfs_create_group(&(mesh_dev->dev.kobj), &lbs_mesh_attr_group); |
| if (ret) |
| goto err_unregister; |
| |
| /* Everything successful */ |
| ret = 0; |
| goto done; |
| |
| err_unregister: |
| unregister_netdev(mesh_dev); |
| |
| err_free: |
| free_netdev(mesh_dev); |
| |
| done: |
| lbs_deb_leave_args(LBS_DEB_MESH, "ret %d", ret); |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(lbs_add_mesh); |
| |
| |
| static void lbs_remove_mesh(struct lbs_private *priv) |
| { |
| struct net_device *mesh_dev; |
| |
| |
| mesh_dev = priv->mesh_dev; |
| if (!mesh_dev) |
| return; |
| |
| lbs_deb_enter(LBS_DEB_MESH); |
| netif_stop_queue(mesh_dev); |
| netif_carrier_off(priv->mesh_dev); |
| sysfs_remove_group(&(mesh_dev->dev.kobj), &lbs_mesh_attr_group); |
| unregister_netdev(mesh_dev); |
| priv->mesh_dev = NULL; |
| free_netdev(mesh_dev); |
| lbs_deb_leave(LBS_DEB_MESH); |
| } |
| EXPORT_SYMBOL_GPL(lbs_remove_mesh); |
| |
| /** |
| * @brief This function finds the CFP in |
| * region_cfp_table based on region and band parameter. |
| * |
| * @param region The region code |
| * @param band The band |
| * @param cfp_no A pointer to CFP number |
| * @return A pointer to CFP |
| */ |
| struct chan_freq_power *lbs_get_region_cfp_table(u8 region, u8 band, int *cfp_no) |
| { |
| int i, end; |
| |
| lbs_deb_enter(LBS_DEB_MAIN); |
| |
| end = ARRAY_SIZE(region_cfp_table); |
| |
| for (i = 0; i < end ; i++) { |
| lbs_deb_main("region_cfp_table[i].region=%d\n", |
| region_cfp_table[i].region); |
| if (region_cfp_table[i].region == region) { |
| *cfp_no = region_cfp_table[i].cfp_no_BG; |
| lbs_deb_leave(LBS_DEB_MAIN); |
| return region_cfp_table[i].cfp_BG; |
| } |
| } |
| |
| lbs_deb_leave_args(LBS_DEB_MAIN, "ret NULL"); |
| return NULL; |
| } |
| |
| int lbs_set_regiontable(struct lbs_private *priv, u8 region, u8 band) |
| { |
| int ret = 0; |
| int i = 0; |
| |
| struct chan_freq_power *cfp; |
| int cfp_no; |
| |
| lbs_deb_enter(LBS_DEB_MAIN); |
| |
| memset(priv->region_channel, 0, sizeof(priv->region_channel)); |
| |
| cfp = lbs_get_region_cfp_table(region, band, &cfp_no); |
| if (cfp != NULL) { |
| priv->region_channel[i].nrcfp = cfp_no; |
| priv->region_channel[i].CFP = cfp; |
| } else { |
| lbs_deb_main("wrong region code %#x in band B/G\n", |
| region); |
| ret = -1; |
| goto out; |
| } |
| priv->region_channel[i].valid = 1; |
| priv->region_channel[i].region = region; |
| priv->region_channel[i].band = band; |
| i++; |
| out: |
| lbs_deb_leave_args(LBS_DEB_MAIN, "ret %d", ret); |
| return ret; |
| } |
| |
| /** |
| * @brief This function handles the interrupt. it will change PS |
| * state if applicable. it will wake up main_thread to handle |
| * the interrupt event as well. |
| * |
| * @param dev A pointer to net_device structure |
| * @return n/a |
| */ |
| void lbs_interrupt(struct lbs_private *priv) |
| { |
| lbs_deb_enter(LBS_DEB_THREAD); |
| |
| lbs_deb_thread("lbs_interrupt: intcounter=%d\n", priv->intcounter); |
| priv->intcounter++; |
| if (priv->psstate == PS_STATE_SLEEP) |
| priv->psstate = PS_STATE_AWAKE; |
| wake_up_interruptible(&priv->waitq); |
| |
| lbs_deb_leave(LBS_DEB_THREAD); |
| } |
| EXPORT_SYMBOL_GPL(lbs_interrupt); |
| |
| int lbs_reset_device(struct lbs_private *priv) |
| { |
| int ret; |
| |
| lbs_deb_enter(LBS_DEB_MAIN); |
| ret = lbs_prepare_and_send_command(priv, CMD_802_11_RESET, |
| CMD_ACT_HALT, 0, 0, NULL); |
| msleep_interruptible(10); |
| |
| lbs_deb_leave_args(LBS_DEB_MAIN, "ret %d", ret); |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(lbs_reset_device); |
| |
| static int __init lbs_init_module(void) |
| { |
| lbs_deb_enter(LBS_DEB_MAIN); |
| lbs_debugfs_init(); |
| lbs_deb_leave(LBS_DEB_MAIN); |
| return 0; |
| } |
| |
| static void __exit lbs_exit_module(void) |
| { |
| lbs_deb_enter(LBS_DEB_MAIN); |
| lbs_debugfs_remove(); |
| lbs_deb_leave(LBS_DEB_MAIN); |
| } |
| |
| /* |
| * rtap interface support fuctions |
| */ |
| |
| static int lbs_rtap_open(struct net_device *dev) |
| { |
| /* Yes, _stop_ the queue. Because we don't support injection */ |
| lbs_deb_enter(LBS_DEB_MAIN); |
| netif_carrier_off(dev); |
| netif_stop_queue(dev); |
| lbs_deb_leave(LBS_DEB_LEAVE); |
| return 0; |
| } |
| |
| static int lbs_rtap_stop(struct net_device *dev) |
| { |
| lbs_deb_enter(LBS_DEB_MAIN); |
| lbs_deb_leave(LBS_DEB_MAIN); |
| return 0; |
| } |
| |
| static int lbs_rtap_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) |
| { |
| netif_stop_queue(dev); |
| return NETDEV_TX_BUSY; |
| } |
| |
| static struct net_device_stats *lbs_rtap_get_stats(struct net_device *dev) |
| { |
| struct lbs_private *priv = dev->priv; |
| lbs_deb_enter(LBS_DEB_NET); |
| return &priv->stats; |
| } |
| |
| |
| static void lbs_remove_rtap(struct lbs_private *priv) |
| { |
| lbs_deb_enter(LBS_DEB_MAIN); |
| if (priv->rtap_net_dev == NULL) |
| return; |
| unregister_netdev(priv->rtap_net_dev); |
| free_netdev(priv->rtap_net_dev); |
| priv->rtap_net_dev = NULL; |
| lbs_deb_leave(LBS_DEB_MAIN); |
| } |
| |
| static int lbs_add_rtap(struct lbs_private *priv) |
| { |
| int ret = 0; |
| struct net_device *rtap_dev; |
| |
| lbs_deb_enter(LBS_DEB_MAIN); |
| if (priv->rtap_net_dev) { |
| ret = -EPERM; |
| goto out; |
| } |
| |
| rtap_dev = alloc_netdev(0, "rtap%d", ether_setup); |
| if (rtap_dev == NULL) { |
| ret = -ENOMEM; |
| goto out; |
| } |
| |
| memcpy(rtap_dev->dev_addr, priv->current_addr, ETH_ALEN); |
| rtap_dev->type = ARPHRD_IEEE80211_RADIOTAP; |
| rtap_dev->open = lbs_rtap_open; |
| rtap_dev->stop = lbs_rtap_stop; |
| rtap_dev->get_stats = lbs_rtap_get_stats; |
| rtap_dev->hard_start_xmit = lbs_rtap_hard_start_xmit; |
| rtap_dev->set_multicast_list = lbs_set_multicast_list; |
| rtap_dev->priv = priv; |
| |
| ret = register_netdev(rtap_dev); |
| if (ret) { |
| free_netdev(rtap_dev); |
| goto out; |
| } |
| priv->rtap_net_dev = rtap_dev; |
| |
| out: |
| lbs_deb_leave_args(LBS_DEB_MAIN, "ret %d", ret); |
| return ret; |
| } |
| |
| |
| module_init(lbs_init_module); |
| module_exit(lbs_exit_module); |
| |
| MODULE_DESCRIPTION("Libertas WLAN Driver Library"); |
| MODULE_AUTHOR("Marvell International Ltd."); |
| MODULE_LICENSE("GPL"); |