[libata] pata_ixp4xx: convert to new EH
Signed-off-by: Jeff Garzik <jeff@garzik.org>
diff --git a/drivers/ata/pata_ixp4xx_cf.c b/drivers/ata/pata_ixp4xx_cf.c
index 887bbaa..7633210 100644
--- a/drivers/ata/pata_ixp4xx_cf.c
+++ b/drivers/ata/pata_ixp4xx_cf.c
@@ -1,13 +1,14 @@
/*
* ixp4xx PATA/Compact Flash driver
- * Copyright (c) 2006 Tower Technologies
+ * Copyright (C) 2006-07 Tower Technologies
* Author: Alessandro Zummo <a.zummo@towertech.it>
*
* An ATA driver to handle a Compact Flash connected
* to the ixp4xx expansion bus in TrueIDE mode. The CF
* must have it chip selects connected to two CS lines
- * on the ixp4xx. The interrupt line is optional, if not
- * specified the driver will run in polling mode.
+ * on the ixp4xx. In the irq is not available, you might
+ * want to modify both this driver and libata to run in
+ * polling mode.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -23,7 +24,7 @@
#include <scsi/scsi_host.h>
#define DRV_NAME "pata_ixp4xx_cf"
-#define DRV_VERSION "0.1.3"
+#define DRV_VERSION "0.2"
static int ixp4xx_set_mode(struct ata_port *ap, struct ata_device **error)
{
@@ -42,13 +43,6 @@
return 0;
}
-static void ixp4xx_phy_reset(struct ata_port *ap)
-{
- ap->cbl = ATA_CBL_PATA40;
- ata_port_probe(ap);
- ata_bus_reset(ap);
-}
-
static void ixp4xx_mmio_data_xfer(struct ata_device *adev, unsigned char *buf,
unsigned int buflen, int write_data)
{
@@ -92,10 +86,6 @@
*data->cs0_cfg |= 0x01;
}
-static void ixp4xx_irq_clear(struct ata_port *ap)
-{
-}
-
static struct scsi_host_template ixp4xx_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
@@ -115,29 +105,32 @@
};
static struct ata_port_operations ixp4xx_port_ops = {
- .set_mode = ixp4xx_set_mode,
- .mode_filter = ata_pci_default_filter,
+ .set_mode = ixp4xx_set_mode,
+ .mode_filter = ata_pci_default_filter,
- .port_disable = ata_port_disable,
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
+ .port_disable = ata_port_disable,
+ .tf_load = ata_tf_load,
+ .tf_read = ata_tf_read,
+ .exec_command = ata_exec_command,
+ .check_status = ata_check_status,
+ .dev_select = ata_std_dev_select,
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
- .eng_timeout = ata_eng_timeout,
- .data_xfer = ixp4xx_mmio_data_xfer,
- .cable_detect = ata_cable_40wire,
+ .freeze = ata_bmdma_freeze,
+ .thaw = ata_bmdma_thaw,
+ .error_handler = ata_bmdma_error_handler,
+ .post_internal_cmd = ata_bmdma_post_internal_cmd,
- .irq_clear = ixp4xx_irq_clear,
- .irq_on = ata_irq_on,
- .irq_ack = ata_irq_ack,
+ .qc_prep = ata_qc_prep,
+ .qc_issue = ata_qc_issue_prot,
+ .data_xfer = ixp4xx_mmio_data_xfer,
+ .cable_detect = ata_cable_40wire,
- .port_start = ata_port_start,
+ .irq_handler = ata_interrupt,
+ .irq_clear = ata_bmdma_irq_clear,
+ .irq_on = ata_irq_on,
+ .irq_ack = ata_dummy_irq_ack,
- .phy_reset = ixp4xx_phy_reset,
+ .port_start = ata_port_start,
};
static void ixp4xx_setup_port(struct ata_ioports *ioaddr,
@@ -211,10 +204,6 @@
ap->pio_mask = 0x1f; /* PIO4 */
ap->flags |= ATA_FLAG_MMIO | ATA_FLAG_NO_LEGACY | ATA_FLAG_NO_ATAPI;
- /* run in polling mode if no irq has been assigned */
- if (!irq)
- ap->flags |= ATA_FLAG_PIO_POLLING;
-
ixp4xx_setup_port(&ap->ioaddr, data);
dev_printk(KERN_INFO, &pdev->dev, "version " DRV_VERSION "\n");