ide: add struct ide_dma_ops (take 3)
Add struct ide_dma_ops and convert core code + drivers to use it.
While at it:
* Drop "ide_" prefix from ->ide_dma_end and ->ide_dma_test_irq methods.
* Drop "ide_" "infixes" from DMA methods.
* au1xxx-ide.c:
- use auide_dma_{test_irq,end}() directly in auide_dma_timeout()
* pdc202xx_old.c:
- drop "old_" "infixes" from DMA methods
* siimage.c:
- add siimage_dma_test_irq() helper
- print SATA warning in siimage_init_one()
* Remove no longer needed ->init_hwif implementations.
v2:
* Changes based on review from Sergei:
- s/siimage_ide_dma_test_irq/siimage_dma_test_irq/
- s/drive->hwif/hwif/ in idefloppy_pc_intr().
- fix patch description w.r.t. au1xxx-ide changes
- fix au1xxx-ide build
- fix naming for cmd64*_dma_ops
- drop "ide_" and "old_" infixes
- s/hpt3xxx_dma_ops/hpt37x_dma_ops/
- s/hpt370x_dma_ops/hpt370_dma_ops/
- use correct DMA ops for HPT302/N, HPT371/N and HPT374
- s/it821x_smart_dma_ops/it821x_pass_through_dma_ops/
v3:
* Two bugs slipped in v2 (noticed by Sergei):
- use correct DMA ops for HPT374 (for real this time)
- handle HPT370/HPT370A properly
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
diff --git a/drivers/ide/pci/sc1200.c b/drivers/ide/pci/sc1200.c
index 0c14477..303bcfb 100644
--- a/drivers/ide/pci/sc1200.c
+++ b/drivers/ide/pci/sc1200.c
@@ -165,7 +165,7 @@
*
* returns 1 on error, 0 otherwise
*/
-static int sc1200_ide_dma_end (ide_drive_t *drive)
+static int sc1200_dma_end(ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
unsigned long dma_base = hwif->dma_base;
@@ -214,7 +214,7 @@
printk("SC1200: %s: changing (U)DMA mode\n", drive->name);
ide_dma_off_quietly(drive);
if (ide_set_dma_mode(drive, mode) == 0 && drive->using_dma)
- hwif->dma_host_set(drive, 1);
+ hwif->dma_ops->dma_host_set(drive, 1);
return;
}
@@ -286,28 +286,20 @@
}
#endif
-/*
- * This gets invoked by the IDE driver once for each channel,
- * and performs channel-specific pre-initialization before drive probing.
- */
-static void __devinit init_hwif_sc1200 (ide_hwif_t *hwif)
-{
- if (hwif->dma_base == 0)
- return;
-
- hwif->ide_dma_end = &sc1200_ide_dma_end;
-}
-
static const struct ide_port_ops sc1200_port_ops = {
.set_pio_mode = sc1200_set_pio_mode,
.set_dma_mode = sc1200_set_dma_mode,
.udma_filter = sc1200_udma_filter,
};
+static struct ide_dma_ops sc1200_dma_ops = {
+ .dma_end = sc1200_dma_end,
+};
+
static const struct ide_port_info sc1200_chipset __devinitdata = {
.name = "SC1200",
- .init_hwif = init_hwif_sc1200,
.port_ops = &sc1200_port_ops,
+ .dma_ops = &sc1200_dma_ops,
.host_flags = IDE_HFLAG_SERIALIZE |
IDE_HFLAG_POST_SET_MODE |
IDE_HFLAG_ABUSE_DMA_MODES,