pinctrl: sunxi: Fix A33 external interrupts not working
pinctrl-sun8i-a33.c (and the dts) declare only 2 interrupt banks,
where as the closely related a23 has 3 banks. This matches with the
datasheet for the A33 where only interrupt banks B and G are specified
where as the A23 has banks A, B and G.
However the A33 being the A23 derative it is means that the interrupt
configure/status io-addresses for the 2 banks it has are not changed
from the A23, iow they have the same address as if bank A was still
present. Where as the sunxi pinctrl currently tries to use the A23 bank
A addresses for bank B, since the pinctrl code does not know about the
removed bank A.
Add a irq_bank_base parameter and use this where appropriate to take
the missing bank A into account.
This fixes external interrupts not working on the A33 (tested with
an i2c touchscreen controller which uses an external interrupt).
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
diff --git a/drivers/pinctrl/sunxi/pinctrl-sunxi.c b/drivers/pinctrl/sunxi/pinctrl-sunxi.c
index 12a1dfa..3b017db 100644
--- a/drivers/pinctrl/sunxi/pinctrl-sunxi.c
+++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.c
@@ -579,7 +579,7 @@
static int sunxi_pinctrl_irq_set_type(struct irq_data *d, unsigned int type)
{
struct sunxi_pinctrl *pctl = irq_data_get_irq_chip_data(d);
- u32 reg = sunxi_irq_cfg_reg(d->hwirq);
+ u32 reg = sunxi_irq_cfg_reg(d->hwirq, pctl->desc->irq_bank_base);
u8 index = sunxi_irq_cfg_offset(d->hwirq);
unsigned long flags;
u32 regval;
@@ -626,7 +626,8 @@
static void sunxi_pinctrl_irq_ack(struct irq_data *d)
{
struct sunxi_pinctrl *pctl = irq_data_get_irq_chip_data(d);
- u32 status_reg = sunxi_irq_status_reg(d->hwirq);
+ u32 status_reg = sunxi_irq_status_reg(d->hwirq,
+ pctl->desc->irq_bank_base);
u8 status_idx = sunxi_irq_status_offset(d->hwirq);
/* Clear the IRQ */
@@ -636,7 +637,7 @@
static void sunxi_pinctrl_irq_mask(struct irq_data *d)
{
struct sunxi_pinctrl *pctl = irq_data_get_irq_chip_data(d);
- u32 reg = sunxi_irq_ctrl_reg(d->hwirq);
+ u32 reg = sunxi_irq_ctrl_reg(d->hwirq, pctl->desc->irq_bank_base);
u8 idx = sunxi_irq_ctrl_offset(d->hwirq);
unsigned long flags;
u32 val;
@@ -653,7 +654,7 @@
static void sunxi_pinctrl_irq_unmask(struct irq_data *d)
{
struct sunxi_pinctrl *pctl = irq_data_get_irq_chip_data(d);
- u32 reg = sunxi_irq_ctrl_reg(d->hwirq);
+ u32 reg = sunxi_irq_ctrl_reg(d->hwirq, pctl->desc->irq_bank_base);
u8 idx = sunxi_irq_ctrl_offset(d->hwirq);
unsigned long flags;
u32 val;
@@ -745,7 +746,7 @@
if (bank == pctl->desc->irq_banks)
return;
- reg = sunxi_irq_status_reg_from_bank(bank);
+ reg = sunxi_irq_status_reg_from_bank(bank, pctl->desc->irq_bank_base);
val = readl(pctl->membase + reg);
if (val) {
@@ -1024,9 +1025,11 @@
for (i = 0; i < pctl->desc->irq_banks; i++) {
/* Mask and clear all IRQs before registering a handler */
- writel(0, pctl->membase + sunxi_irq_ctrl_reg_from_bank(i));
+ writel(0, pctl->membase + sunxi_irq_ctrl_reg_from_bank(i,
+ pctl->desc->irq_bank_base));
writel(0xffffffff,
- pctl->membase + sunxi_irq_status_reg_from_bank(i));
+ pctl->membase + sunxi_irq_status_reg_from_bank(i,
+ pctl->desc->irq_bank_base));
irq_set_chained_handler_and_data(pctl->irq[i],
sunxi_pinctrl_irq_handler,