V4L/DVB (11312): tuner: remove V4L1 code from this driver.
No i2c modules are called with the V4L1 API anymore, so this can be removed.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
diff --git a/drivers/media/video/tuner-core.c b/drivers/media/video/tuner-core.c
index bbf1f48..72d4103 100644
--- a/drivers/media/video/tuner-core.c
+++ b/drivers/media/video/tuner-core.c
@@ -800,132 +800,6 @@
return 0;
}
-#ifdef CONFIG_VIDEO_ALLOW_V4L1
-static long tuner_ioctl(struct v4l2_subdev *sd, unsigned int cmd, void *arg)
-{
- struct tuner *t = to_tuner(sd);
- struct i2c_client *client = v4l2_get_subdevdata(sd);
- struct analog_demod_ops *analog_ops = &t->fe.ops.analog_ops;
- struct dvb_tuner_ops *fe_tuner_ops = &t->fe.ops.tuner_ops;
-
- switch (cmd) {
- case VIDIOCSAUDIO:
- if (check_mode(t, "VIDIOCSAUDIO") == -EINVAL)
- return 0;
- if (check_v4l2(t) == -EINVAL)
- return 0;
-
- /* Should be implemented, since bttv calls it */
- tuner_dbg("VIDIOCSAUDIO not implemented.\n");
- break;
- case VIDIOCSCHAN:
- {
- static const v4l2_std_id map[] = {
- [VIDEO_MODE_PAL] = V4L2_STD_PAL,
- [VIDEO_MODE_NTSC] = V4L2_STD_NTSC_M,
- [VIDEO_MODE_SECAM] = V4L2_STD_SECAM,
- [4 /* bttv */ ] = V4L2_STD_PAL_M,
- [5 /* bttv */ ] = V4L2_STD_PAL_N,
- [6 /* bttv */ ] = V4L2_STD_NTSC_M_JP,
- };
- struct video_channel *vc = arg;
-
- if (check_v4l2(t) == -EINVAL)
- return 0;
-
- if (set_mode(client,t,V4L2_TUNER_ANALOG_TV, "VIDIOCSCHAN")==-EINVAL)
- return 0;
-
- if (vc->norm < ARRAY_SIZE(map))
- t->std = map[vc->norm];
- tuner_fixup_std(t);
- if (t->tv_freq)
- set_tv_freq(client, t->tv_freq);
- return 0;
- }
- case VIDIOCSFREQ:
- {
- unsigned long *v = arg;
-
- if (check_mode(t, "VIDIOCSFREQ") == -EINVAL)
- return 0;
- if (check_v4l2(t) == -EINVAL)
- return 0;
-
- set_freq(client, *v);
- return 0;
- }
- case VIDIOCGTUNER:
- {
- struct video_tuner *vt = arg;
-
- if (check_mode(t, "VIDIOCGTUNER") == -EINVAL)
- return 0;
- if (check_v4l2(t) == -EINVAL)
- return 0;
-
- if (V4L2_TUNER_RADIO == t->mode) {
- if (fe_tuner_ops->get_status) {
- u32 tuner_status;
-
- fe_tuner_ops->get_status(&t->fe, &tuner_status);
- if (tuner_status & TUNER_STATUS_STEREO)
- vt->flags |= VIDEO_TUNER_STEREO_ON;
- else
- vt->flags &= ~VIDEO_TUNER_STEREO_ON;
- } else {
- if (analog_ops->is_stereo) {
- if (analog_ops->is_stereo(&t->fe))
- vt->flags |=
- VIDEO_TUNER_STEREO_ON;
- else
- vt->flags &=
- ~VIDEO_TUNER_STEREO_ON;
- }
- }
- if (analog_ops->has_signal)
- vt->signal =
- analog_ops->has_signal(&t->fe);
-
- vt->flags |= VIDEO_TUNER_LOW; /* Allow freqs at 62.5 Hz */
-
- vt->rangelow = radio_range[0] * 16000;
- vt->rangehigh = radio_range[1] * 16000;
-
- } else {
- vt->rangelow = tv_range[0] * 16;
- vt->rangehigh = tv_range[1] * 16;
- }
-
- return 0;
- }
- case VIDIOCGAUDIO:
- {
- struct video_audio *va = arg;
-
- if (check_mode(t, "VIDIOCGAUDIO") == -EINVAL)
- return 0;
- if (check_v4l2(t) == -EINVAL)
- return 0;
-
- if (V4L2_TUNER_RADIO == t->mode) {
- if (fe_tuner_ops->get_status) {
- u32 tuner_status;
-
- fe_tuner_ops->get_status(&t->fe, &tuner_status);
- va->mode = (tuner_status & TUNER_STATUS_STEREO)
- ? VIDEO_SOUND_STEREO : VIDEO_SOUND_MONO;
- } else if (analog_ops->is_stereo)
- va->mode = analog_ops->is_stereo(&t->fe)
- ? VIDEO_SOUND_STEREO : VIDEO_SOUND_MONO;
- }
- return 0;
- }
- }
- return -ENOIOCTLCMD;
-}
-#endif
-
static int tuner_s_config(struct v4l2_subdev *sd, const struct v4l2_priv_tun_config *cfg)
{
struct tuner *t = to_tuner(sd);
@@ -1111,9 +985,6 @@
static const struct v4l2_subdev_core_ops tuner_core_ops = {
.log_status = tuner_log_status,
.s_standby = tuner_s_standby,
-#ifdef CONFIG_VIDEO_ALLOW_V4L1
- .ioctl = tuner_ioctl,
-#endif
};
static const struct v4l2_subdev_tuner_ops tuner_tuner_ops = {