V4L/DVB (4307): Added support for the md8800 quadro board
Analog TV, CVBS, S-video and DVB-T are working,
DVB-S not yet
Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
diff --git a/Documentation/video4linux/CARDLIST.saa7134 b/Documentation/video4linux/CARDLIST.saa7134
index 9068b66..fc1752b 100644
--- a/Documentation/video4linux/CARDLIST.saa7134
+++ b/Documentation/video4linux/CARDLIST.saa7134
@@ -94,3 +94,4 @@
93 -> Medion 7134 Bridge #2 [16be:0005]
94 -> LifeView FlyDVB-T Hybrid Cardbus [5168:3306,5168:3502]
95 -> LifeView FlyVIDEO3000 (NTSC) [5169:0138]
+ 96 -> Medion Md8800 Quadro [16be:0007,16be:0008]
diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c
index 927413a..99f2e64 100644
--- a/drivers/media/video/saa7134/saa7134-cards.c
+++ b/drivers/media/video/saa7134/saa7134-cards.c
@@ -2891,6 +2891,29 @@
.gpio = 0x8000,
},
},
+ [SAA7134_BOARD_MEDION_MD8800_QUADRO] = {
+ .name = "Medion Md8800 Quadro",
+ .audio_clock = 0x00187de7,
+ .tuner_type = TUNER_PHILIPS_TDA8290,
+ .radio_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ .radio_addr = ADDR_UNSET,
+ .mpeg = SAA7134_MPEG_DVB,
+ .inputs = {{
+ .name = name_tv,
+ .vmux = 1,
+ .amux = TV,
+ .tv = 1,
+ },{
+ .name = name_comp1,
+ .vmux = 0,
+ .amux = LINE2,
+ },{
+ .name = name_svideo,
+ .vmux = 8,
+ .amux = LINE2,
+ }},
+ },
};
const unsigned int saa7134_bcount = ARRAY_SIZE(saa7134_boards);
@@ -3446,6 +3469,18 @@
.subdevice = 0x3502, /* whats the difference to 0x3306 ?*/
.driver_data = SAA7134_BOARD_FLYDVBT_HYBRID_CARDBUS,
},{
+ .vendor = PCI_VENDOR_ID_PHILIPS,
+ .device = PCI_DEVICE_ID_PHILIPS_SAA7133,
+ .subvendor = 0x16be,
+ .subdevice = 0x0007,
+ .driver_data = SAA7134_BOARD_MEDION_MD8800_QUADRO,
+ },{
+ .vendor = PCI_VENDOR_ID_PHILIPS,
+ .device = PCI_DEVICE_ID_PHILIPS_SAA7133,
+ .subvendor = 0x16be,
+ .subdevice = 0x0008,
+ .driver_data = SAA7134_BOARD_MEDION_MD8800_QUADRO,
+ },{
/* --- boards without eeprom + subsystem ID --- */
.vendor = PCI_VENDOR_ID_PHILIPS,
.device = PCI_DEVICE_ID_PHILIPS_SAA7134,
@@ -3732,6 +3767,7 @@
case SAA7134_BOARD_PHILIPS_TIGER:
case SAA7134_BOARD_TEVION_DVBT_220RF:
case SAA7134_BOARD_ASUSTeK_P7131_DUAL:
+ case SAA7134_BOARD_MEDION_MD8800_QUADRO:
/* this is a hybrid board, initialize to analog mode
* and configure firmware eeprom address
*/
diff --git a/drivers/media/video/saa7134/saa7134-dvb.c b/drivers/media/video/saa7134/saa7134-dvb.c
index 279828b..2ffa5b5 100644
--- a/drivers/media/video/saa7134/saa7134-dvb.c
+++ b/drivers/media/video/saa7134/saa7134-dvb.c
@@ -969,6 +969,51 @@
.request_firmware = NULL,
};
+/* ------------------------------------------------------------------ */
+
+static int md8800_dvbt_analog_mode(struct dvb_frontend *fe)
+{
+ struct saa7134_dev *dev = fe->dvb->priv;
+ static u8 data[] = { 0x3c, 0x33, 0x68};
+ struct i2c_msg msg = {.addr=0x08, .flags=0, .buf=data, .len = sizeof(data)};
+
+ i2c_transfer(&dev->i2c_adap, &msg, 1);
+ philips_tda827xa_tuner_sleep( 0x61, fe);
+ return 0;
+}
+
+static int md8800_dvbt_pll_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
+{
+ int ret;
+ struct saa7134_dev *dev = fe->dvb->priv;
+ static u8 tda8290_close[] = { 0x21, 0xc0};
+ static u8 tda8290_open[] = { 0x21, 0x80};
+ struct i2c_msg tda8290_msg = {.addr = 0x4b,.flags = 0, .len = 2};
+ /* close tda8290 i2c bridge */
+ tda8290_msg.buf = tda8290_close;
+ ret = i2c_transfer(&dev->i2c_adap, &tda8290_msg, 1);
+ if (ret != 1)
+ return -EIO;
+ msleep(20);
+ ret = philips_tda827xa_pll_set(0x60, fe, params);
+ if (ret != 0)
+ return ret;
+ /* open tda8290 i2c bridge */
+ tda8290_msg.buf = tda8290_open;
+ i2c_transfer(&dev->i2c_adap, &tda8290_msg, 1);
+ return ret;
+}
+
+static struct tda1004x_config md8800_dvbt_config = {
+ .demod_address = 0x08,
+ .invert = 1,
+ .invert_oclk = 0,
+ .xtal_freq = TDA10046_XTAL_16M,
+ .agc_config = TDA10046_AGC_TDA827X,
+ .if_freq = TDA10046_FREQ_045,
+ .request_firmware = NULL,
+};
+
#endif
/* ------------------------------------------------------------------ */
@@ -1153,6 +1198,15 @@
dev->dvb.frontend->ops.tuner_ops.set_params = ads_duo_tuner_set_params;
}
break;
+ case SAA7134_BOARD_MEDION_MD8800_QUADRO:
+ dev->dvb.frontend = tda10046_attach(&md8800_dvbt_config,
+ &dev->i2c_adap);
+ if (dev->dvb.frontend) {
+ dev->dvb.frontend->ops.tuner_ops.init = philips_tiger_tuner_init;
+ dev->dvb.frontend->ops.tuner_ops.sleep = md8800_dvbt_analog_mode;
+ dev->dvb.frontend->ops.tuner_ops.set_params = md8800_dvbt_pll_set;
+ }
+ break;
#endif
#ifdef HAVE_NXT200X
case SAA7134_BOARD_AVERMEDIA_AVERTVHD_A180:
diff --git a/drivers/media/video/saa7134/saa7134.h b/drivers/media/video/saa7134/saa7134.h
index c04ce61..e3739b8 100644
--- a/drivers/media/video/saa7134/saa7134.h
+++ b/drivers/media/video/saa7134/saa7134.h
@@ -223,6 +223,7 @@
#define SAA7134_BOARD_MD7134_BRIDGE_2 93
#define SAA7134_BOARD_FLYDVBT_HYBRID_CARDBUS 94
#define SAA7134_BOARD_FLYVIDEO3000_NTSC 95
+#define SAA7134_BOARD_MEDION_MD8800_QUADRO 96
#define SAA7134_MAXBOARDS 8
#define SAA7134_INPUT_MAX 8