pata_efar: fix PIO2 underclocking
Fix the PIO mode 2 using mode 0 timings -- this driver should enable the
fast timing bank starting with PIO2, just like the PIIX/ICH drivers do.
Also, fix/rephrase some comments while at it.
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
diff --git a/drivers/ata/pata_efar.c b/drivers/ata/pata_efar.c
index 2085e0a..2a6412f 100644
--- a/drivers/ata/pata_efar.c
+++ b/drivers/ata/pata_efar.c
@@ -22,7 +22,7 @@
#include <linux/ata.h>
#define DRV_NAME "pata_efar"
-#define DRV_VERSION "0.4.4"
+#define DRV_VERSION "0.4.5"
/**
* efar_pre_reset - Enable bits
@@ -98,18 +98,17 @@
{ 2, 1 },
{ 2, 3 }, };
- if (pio > 2)
- control |= 1; /* TIME1 enable */
+ if (pio > 1)
+ control |= 1; /* TIME */
if (ata_pio_need_iordy(adev)) /* PIO 3/4 require IORDY */
- control |= 2; /* IE enable */
- /* Intel specifies that the PPE functionality is for disk only */
+ control |= 2; /* IE */
+ /* Intel specifies that the prefetch/posting is for disk only */
if (adev->class == ATA_DEV_ATA)
- control |= 4; /* PPE enable */
+ control |= 4; /* PPE */
pci_read_config_word(dev, idetm_port, &idetm_data);
- /* Enable PPE, IE and TIME as appropriate */
-
+ /* Set PPE, IE, and TIME as appropriate */
if (adev->devno == 0) {
idetm_data &= 0xCCF0;
idetm_data |= control;
@@ -129,7 +128,7 @@
pci_write_config_byte(dev, 0x44, slave_data);
}
- idetm_data |= 0x4000; /* Ensure SITRE is enabled */
+ idetm_data |= 0x4000; /* Ensure SITRE is set */
pci_write_config_word(dev, idetm_port, idetm_data);
}