| # |
| # DMA engine configuration |
| # |
| |
| menuconfig DMADEVICES |
| bool "DMA Engine support" |
| depends on HAS_DMA |
| help |
| DMA engines can do asynchronous data transfers without |
| involving the host CPU. Currently, this framework can be |
| used to offload memory copies in the network stack and |
| RAID operations in the MD driver. This menu only presents |
| DMA Device drivers supported by the configured arch, it may |
| be empty in some cases. |
| |
| config DMADEVICES_DEBUG |
| bool "DMA Engine debugging" |
| depends on DMADEVICES != n |
| help |
| This is an option for use by developers; most people should |
| say N here. This enables DMA engine core and driver debugging. |
| |
| config DMADEVICES_VDEBUG |
| bool "DMA Engine verbose debugging" |
| depends on DMADEVICES_DEBUG != n |
| help |
| This is an option for use by developers; most people should |
| say N here. This enables deeper (more verbose) debugging of |
| the DMA engine core and drivers. |
| |
| |
| if DMADEVICES |
| |
| comment "DMA Devices" |
| |
| config INTEL_MID_DMAC |
| tristate "Intel MID DMA support for Peripheral DMA controllers" |
| depends on PCI && X86 |
| select DMA_ENGINE |
| default n |
| help |
| Enable support for the Intel(R) MID DMA engine present |
| in Intel MID chipsets. |
| |
| Say Y here if you have such a chipset. |
| |
| If unsure, say N. |
| |
| config ASYNC_TX_ENABLE_CHANNEL_SWITCH |
| bool |
| |
| config AMBA_PL08X |
| bool "ARM PrimeCell PL080 or PL081 support" |
| depends on ARM_AMBA |
| select DMA_ENGINE |
| select DMA_VIRTUAL_CHANNELS |
| help |
| Platform has a PL08x DMAC device |
| which can provide DMA engine support |
| |
| config INTEL_IOATDMA |
| tristate "Intel I/OAT DMA support" |
| depends on PCI && X86 |
| select DMA_ENGINE |
| select DMA_ENGINE_RAID |
| select DCA |
| help |
| Enable support for the Intel(R) I/OAT DMA engine present |
| in recent Intel Xeon chipsets. |
| |
| Say Y here if you have such a chipset. |
| |
| If unsure, say N. |
| |
| config INTEL_IOP_ADMA |
| tristate "Intel IOP ADMA support" |
| depends on ARCH_IOP32X || ARCH_IOP33X || ARCH_IOP13XX |
| select DMA_ENGINE |
| select ASYNC_TX_ENABLE_CHANNEL_SWITCH |
| help |
| Enable support for the Intel(R) IOP Series RAID engines. |
| |
| source "drivers/dma/dw/Kconfig" |
| |
| config AT_HDMAC |
| tristate "Atmel AHB DMA support" |
| depends on ARCH_AT91 |
| select DMA_ENGINE |
| help |
| Support the Atmel AHB DMA controller. |
| |
| config FSL_DMA |
| tristate "Freescale Elo series DMA support" |
| depends on FSL_SOC |
| select DMA_ENGINE |
| select ASYNC_TX_ENABLE_CHANNEL_SWITCH |
| ---help--- |
| Enable support for the Freescale Elo series DMA controllers. |
| The Elo is the DMA controller on some mpc82xx and mpc83xx parts, the |
| EloPlus is on mpc85xx and mpc86xx and Pxxx parts, and the Elo3 is on |
| some Txxx and Bxxx parts. |
| |
| config MPC512X_DMA |
| tristate "Freescale MPC512x built-in DMA engine support" |
| depends on PPC_MPC512x || PPC_MPC831x |
| select DMA_ENGINE |
| ---help--- |
| Enable support for the Freescale MPC512x built-in DMA engine. |
| |
| source "drivers/dma/bestcomm/Kconfig" |
| |
| config MV_XOR |
| bool "Marvell XOR engine support" |
| depends on PLAT_ORION |
| select DMA_ENGINE |
| select DMA_ENGINE_RAID |
| select ASYNC_TX_ENABLE_CHANNEL_SWITCH |
| ---help--- |
| Enable support for the Marvell XOR engine. |
| |
| config MX3_IPU |
| bool "MX3x Image Processing Unit support" |
| depends on ARCH_MXC |
| select DMA_ENGINE |
| default y |
| help |
| If you plan to use the Image Processing unit in the i.MX3x, say |
| Y here. If unsure, select Y. |
| |
| config MX3_IPU_IRQS |
| int "Number of dynamically mapped interrupts for IPU" |
| depends on MX3_IPU |
| range 2 137 |
| default 4 |
| help |
| Out of 137 interrupt sources on i.MX31 IPU only very few are used. |
| To avoid bloating the irq_desc[] array we allocate a sufficient |
| number of IRQ slots and map them dynamically to specific sources. |
| |
| config TXX9_DMAC |
| tristate "Toshiba TXx9 SoC DMA support" |
| depends on MACH_TX49XX || MACH_TX39XX |
| select DMA_ENGINE |
| help |
| Support the TXx9 SoC internal DMA controller. This can be |
| integrated in chips such as the Toshiba TX4927/38/39. |
| |
| config TEGRA20_APB_DMA |
| bool "NVIDIA Tegra20 APB DMA support" |
| depends on ARCH_TEGRA |
| select DMA_ENGINE |
| help |
| Support for the NVIDIA Tegra20 APB DMA controller driver. The |
| DMA controller is having multiple DMA channel which can be |
| configured for different peripherals like audio, UART, SPI, |
| I2C etc which is in APB bus. |
| This DMA controller transfers data from memory to peripheral fifo |
| or vice versa. It does not support memory to memory data transfer. |
| |
| config S3C24XX_DMAC |
| tristate "Samsung S3C24XX DMA support" |
| depends on ARCH_S3C24XX && !S3C24XX_DMA |
| select DMA_ENGINE |
| select DMA_VIRTUAL_CHANNELS |
| help |
| Support for the Samsung S3C24XX DMA controller driver. The |
| DMA controller is having multiple DMA channels which can be |
| configured for different peripherals like audio, UART, SPI. |
| The DMA controller can transfer data from memory to peripheral, |
| periphal to memory, periphal to periphal and memory to memory. |
| |
| source "drivers/dma/sh/Kconfig" |
| |
| config COH901318 |
| bool "ST-Ericsson COH901318 DMA support" |
| select DMA_ENGINE |
| depends on ARCH_U300 |
| help |
| Enable support for ST-Ericsson COH 901 318 DMA. |
| |
| config STE_DMA40 |
| bool "ST-Ericsson DMA40 support" |
| depends on ARCH_U8500 |
| select DMA_ENGINE |
| help |
| Support for ST-Ericsson DMA40 controller |
| |
| config AMCC_PPC440SPE_ADMA |
| tristate "AMCC PPC440SPe ADMA support" |
| depends on 440SPe || 440SP |
| select DMA_ENGINE |
| select DMA_ENGINE_RAID |
| select ARCH_HAS_ASYNC_TX_FIND_CHANNEL |
| select ASYNC_TX_ENABLE_CHANNEL_SWITCH |
| help |
| Enable support for the AMCC PPC440SPe RAID engines. |
| |
| config TIMB_DMA |
| tristate "Timberdale FPGA DMA support" |
| depends on MFD_TIMBERDALE || HAS_IOMEM |
| select DMA_ENGINE |
| help |
| Enable support for the Timberdale FPGA DMA engine. |
| |
| config SIRF_DMA |
| tristate "CSR SiRFprimaII/SiRFmarco DMA support" |
| depends on ARCH_SIRF |
| select DMA_ENGINE |
| help |
| Enable support for the CSR SiRFprimaII DMA engine. |
| |
| config TI_EDMA |
| bool "TI EDMA support" |
| depends on ARCH_DAVINCI || ARCH_OMAP || ARCH_KEYSTONE |
| select DMA_ENGINE |
| select DMA_VIRTUAL_CHANNELS |
| select TI_PRIV_EDMA |
| default n |
| help |
| Enable support for the TI EDMA controller. This DMA |
| engine is found on TI DaVinci and AM33xx parts. |
| |
| config ARCH_HAS_ASYNC_TX_FIND_CHANNEL |
| bool |
| |
| config PL330_DMA |
| tristate "DMA API Driver for PL330" |
| select DMA_ENGINE |
| depends on ARM_AMBA |
| help |
| Select if your platform has one or more PL330 DMACs. |
| You need to provide platform specific settings via |
| platform_data for a dma-pl330 device. |
| |
| config PCH_DMA |
| tristate "Intel EG20T PCH / LAPIS Semicon IOH(ML7213/ML7223/ML7831) DMA" |
| depends on PCI && X86 |
| select DMA_ENGINE |
| help |
| Enable support for Intel EG20T PCH DMA engine. |
| |
| This driver also can be used for LAPIS Semiconductor IOH(Input/ |
| Output Hub), ML7213, ML7223 and ML7831. |
| ML7213 IOH is for IVI(In-Vehicle Infotainment) use, ML7223 IOH is |
| for MP(Media Phone) use and ML7831 IOH is for general purpose use. |
| ML7213/ML7223/ML7831 is companion chip for Intel Atom E6xx series. |
| ML7213/ML7223/ML7831 is completely compatible for Intel EG20T PCH. |
| |
| config IMX_SDMA |
| tristate "i.MX SDMA support" |
| depends on ARCH_MXC |
| select DMA_ENGINE |
| help |
| Support the i.MX SDMA engine. This engine is integrated into |
| Freescale i.MX25/31/35/51/53 chips. |
| |
| config IMX_DMA |
| tristate "i.MX DMA support" |
| depends on ARCH_MXC |
| select DMA_ENGINE |
| help |
| Support the i.MX DMA engine. This engine is integrated into |
| Freescale i.MX1/21/27 chips. |
| |
| config MXS_DMA |
| bool "MXS DMA support" |
| depends on SOC_IMX23 || SOC_IMX28 || SOC_IMX6Q |
| select STMP_DEVICE |
| select DMA_ENGINE |
| help |
| Support the MXS DMA engine. This engine including APBH-DMA |
| and APBX-DMA is integrated into Freescale i.MX23/28 chips. |
| |
| config EP93XX_DMA |
| bool "Cirrus Logic EP93xx DMA support" |
| depends on ARCH_EP93XX |
| select DMA_ENGINE |
| help |
| Enable support for the Cirrus Logic EP93xx M2P/M2M DMA controller. |
| |
| config DMA_SA11X0 |
| tristate "SA-11x0 DMA support" |
| depends on ARCH_SA1100 |
| select DMA_ENGINE |
| select DMA_VIRTUAL_CHANNELS |
| help |
| Support the DMA engine found on Intel StrongARM SA-1100 and |
| SA-1110 SoCs. This DMA engine can only be used with on-chip |
| devices. |
| |
| config MMP_TDMA |
| bool "MMP Two-Channel DMA support" |
| depends on ARCH_MMP |
| select DMA_ENGINE |
| select MMP_SRAM |
| help |
| Support the MMP Two-Channel DMA engine. |
| This engine used for MMP Audio DMA and pxa910 SQU. |
| It needs sram driver under mach-mmp. |
| |
| Say Y here if you enabled MMP ADMA, otherwise say N. |
| |
| config DMA_OMAP |
| tristate "OMAP DMA support" |
| depends on ARCH_OMAP |
| select DMA_ENGINE |
| select DMA_VIRTUAL_CHANNELS |
| |
| config DMA_BCM2835 |
| tristate "BCM2835 DMA engine support" |
| depends on (ARCH_BCM2835 || MACH_BCM2708) |
| select DMA_ENGINE |
| select DMA_VIRTUAL_CHANNELS |
| |
| config TI_CPPI41 |
| tristate "AM33xx CPPI41 DMA support" |
| depends on ARCH_OMAP |
| select DMA_ENGINE |
| help |
| The Communications Port Programming Interface (CPPI) 4.1 DMA engine |
| is currently used by the USB driver on AM335x platforms. |
| |
| config MMP_PDMA |
| bool "MMP PDMA support" |
| depends on (ARCH_MMP || ARCH_PXA) |
| select DMA_ENGINE |
| help |
| Support the MMP PDMA engine for PXA and MMP platform. |
| |
| config DMA_JZ4740 |
| tristate "JZ4740 DMA support" |
| depends on MACH_JZ4740 |
| select DMA_ENGINE |
| select DMA_VIRTUAL_CHANNELS |
| |
| config K3_DMA |
| tristate "Hisilicon K3 DMA support" |
| depends on ARCH_HI3xxx |
| select DMA_ENGINE |
| select DMA_VIRTUAL_CHANNELS |
| help |
| Support the DMA engine for Hisilicon K3 platform |
| devices. |
| |
| config MOXART_DMA |
| tristate "MOXART DMA support" |
| depends on ARCH_MOXART |
| select DMA_ENGINE |
| select DMA_VIRTUAL_CHANNELS |
| help |
| Enable support for the MOXA ART SoC DMA controller. |
| |
| config DMA_ENGINE |
| bool |
| |
| config DMA_VIRTUAL_CHANNELS |
| tristate |
| |
| config DMA_ACPI |
| def_bool y |
| depends on ACPI |
| |
| config DMA_OF |
| def_bool y |
| depends on OF |
| |
| comment "DMA Clients" |
| depends on DMA_ENGINE |
| |
| config NET_DMA |
| bool "Network: TCP receive copy offload" |
| depends on DMA_ENGINE && NET |
| default (INTEL_IOATDMA || FSL_DMA) |
| depends on BROKEN |
| help |
| This enables the use of DMA engines in the network stack to |
| offload receive copy-to-user operations, freeing CPU cycles. |
| |
| Say Y here if you enabled INTEL_IOATDMA or FSL_DMA, otherwise |
| say N. |
| |
| config ASYNC_TX_DMA |
| bool "Async_tx: Offload support for the async_tx api" |
| depends on DMA_ENGINE |
| help |
| This allows the async_tx api to take advantage of offload engines for |
| memcpy, memset, xor, and raid6 p+q operations. If your platform has |
| a dma engine that can perform raid operations and you have enabled |
| MD_RAID456 say Y. |
| |
| If unsure, say N. |
| |
| config DMATEST |
| tristate "DMA Test client" |
| depends on DMA_ENGINE |
| help |
| Simple DMA test client. Say N unless you're debugging a |
| DMA Device driver. |
| |
| config DMA_ENGINE_RAID |
| bool |
| |
| endif |