ASoC: omap-mcbsp - add support for upto 16 channels.

This patch increases the number of supported audio channels from 4
to 16 and has been sponsored by Shotspotter Inc. It also fixes a
FSYNC rate calculation bug when McBSP is FSYNC master.

Signed-off-by: Graeme Gregory <gg@slimlogic.co.uk>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Tested-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Acked-by: Jarkko Nikula <jhnikula@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
diff --git a/sound/soc/omap/omap-mcbsp.c b/sound/soc/omap/omap-mcbsp.c
index 3341f49..45be942 100644
--- a/sound/soc/omap/omap-mcbsp.c
+++ b/sound/soc/omap/omap-mcbsp.c
@@ -49,6 +49,8 @@
 	 */
 	int				active;
 	int				configured;
+	unsigned int			in_freq;
+	int				clk_div;
 };
 
 #define to_mcbsp(priv)	container_of((priv), struct omap_mcbsp_data, bus_id)
@@ -257,7 +259,7 @@
 	int dma, bus_id = mcbsp_data->bus_id, id = cpu_dai->id;
 	int wlen, channels, wpf, sync_mode = OMAP_DMA_SYNC_ELEMENT;
 	unsigned long port;
-	unsigned int format;
+	unsigned int format, div, framesize, master;
 
 	if (cpu_class_is_omap1()) {
 		dma = omap1_dma_reqs[bus_id][substream->stream];
@@ -294,28 +296,19 @@
 
 	format = mcbsp_data->fmt & SND_SOC_DAIFMT_FORMAT_MASK;
 	wpf = channels = params_channels(params);
-	switch (channels) {
-	case 2:
-		if (format == SND_SOC_DAIFMT_I2S) {
-			/* Use dual-phase frames */
-			regs->rcr2	|= RPHASE;
-			regs->xcr2	|= XPHASE;
-			/* Set 1 word per (McBSP) frame for phase1 and phase2 */
-			wpf--;
-			regs->rcr2	|= RFRLEN2(wpf - 1);
-			regs->xcr2	|= XFRLEN2(wpf - 1);
-		}
-	case 1:
-	case 4:
-		/* Set word per (McBSP) frame for phase1 */
-		regs->rcr1	|= RFRLEN1(wpf - 1);
-		regs->xcr1	|= XFRLEN1(wpf - 1);
-		break;
-	default:
-		/* Unsupported number of channels */
-		return -EINVAL;
+	if (channels == 2 && format == SND_SOC_DAIFMT_I2S) {
+		/* Use dual-phase frames */
+		regs->rcr2	|= RPHASE;
+		regs->xcr2	|= XPHASE;
+		/* Set 1 word per (McBSP) frame for phase1 and phase2 */
+		wpf--;
+		regs->rcr2	|= RFRLEN2(wpf - 1);
+		regs->xcr2	|= XFRLEN2(wpf - 1);
 	}
 
+	regs->rcr1	|= RFRLEN1(wpf - 1);
+	regs->xcr1	|= XFRLEN1(wpf - 1);
+
 	switch (params_format(params)) {
 	case SNDRV_PCM_FORMAT_S16_LE:
 		/* Set word lengths */
@@ -330,15 +323,30 @@
 		return -EINVAL;
 	}
 
+	/* In McBSP master modes, FRAME (i.e. sample rate) is generated
+	 * by _counting_ BCLKs. Calculate frame size in BCLKs */
+	master = mcbsp_data->fmt & SND_SOC_DAIFMT_MASTER_MASK;
+	if (master ==	SND_SOC_DAIFMT_CBS_CFS) {
+		div = mcbsp_data->clk_div ? mcbsp_data->clk_div : 1;
+		framesize = (mcbsp_data->in_freq / div) / params_rate(params);
+
+		if (framesize < wlen * channels) {
+			printk(KERN_ERR "%s: not enough bandwidth for desired rate and "
+					"channels\n", __func__);
+			return -EINVAL;
+		}
+	} else
+		framesize = wlen * channels;
+
 	/* Set FS period and length in terms of bit clock periods */
 	switch (format) {
 	case SND_SOC_DAIFMT_I2S:
-		regs->srgr2	|= FPER(wlen * channels - 1);
-		regs->srgr1	|= FWID(wlen - 1);
+		regs->srgr2	|= FPER(framesize - 1);
+		regs->srgr1	|= FWID((framesize >> 1) - 1);
 		break;
 	case SND_SOC_DAIFMT_DSP_A:
 	case SND_SOC_DAIFMT_DSP_B:
-		regs->srgr2	|= FPER(wlen * channels - 1);
+		regs->srgr2	|= FPER(framesize - 1);
 		regs->srgr1	|= FWID(0);
 		break;
 	}
@@ -454,6 +462,7 @@
 	if (div_id != OMAP_MCBSP_CLKGDV)
 		return -ENODEV;
 
+	mcbsp_data->clk_div = div;
 	regs->srgr1	|= CLKGDV(div - 1);
 
 	return 0;
@@ -554,6 +563,8 @@
 	struct omap_mcbsp_reg_cfg *regs = &mcbsp_data->regs;
 	int err = 0;
 
+	mcbsp_data->in_freq = freq;
+
 	switch (clk_id) {
 	case OMAP_MCBSP_SYSCLK_CLK:
 		regs->srgr2	|= CLKSM;
@@ -598,13 +609,13 @@
 	.id = (link_id),					\
 	.playback = {						\
 		.channels_min = 1,				\
-		.channels_max = 4,				\
+		.channels_max = 16,				\
 		.rates = OMAP_MCBSP_RATES,			\
 		.formats = SNDRV_PCM_FMTBIT_S16_LE,		\
 	},							\
 	.capture = {						\
 		.channels_min = 1,				\
-		.channels_max = 4,				\
+		.channels_max = 16,				\
 		.rates = OMAP_MCBSP_RATES,			\
 		.formats = SNDRV_PCM_FMTBIT_S16_LE,		\
 	},							\