staging: winbond: Fix line over 80 characters.
Fix checkpatch.pl issues with line over 80 characters in localpara.h
Signed-off-by: Gulsah Kose <gulsah.1004@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/drivers/staging/winbond/localpara.h b/drivers/staging/winbond/localpara.h
index 84effc4..8ca80dd 100644
--- a/drivers/staging/winbond/localpara.h
+++ b/drivers/staging/winbond/localpara.h
@@ -58,9 +58,13 @@
#define LOCAL_11B_BASIC_RATE_BITMAP 0x826
#define LOCAL_11B_OPERATION_RATE_BITMAP 0x826
#define LOCAL_11G_BASIC_RATE_BITMAP 0x826 /* 1, 2, 5.5, 11 */
-#define LOCAL_11G_OPERATION_RATE_BITMAP 0x130c1240 /* 6, 9, 12, 18, 24, 36, 48, 54 */
+#define LOCAL_11G_OPERATION_RATE_BITMAP 0x130c1240 /* 6, 9, 12, 18,
+ * 24, 36, 48, 54
+ */
#define LOCAL_11A_BASIC_RATE_BITMAP 0x01001040 /* 6, 12, 24 */
-#define LOCAL_11A_OPERATION_RATE_BITMAP 0x120c0200 /* 9, 18, 36, 48, 54 */
+#define LOCAL_11A_OPERATION_RATE_BITMAP 0x120c0200 /* 9, 18, 36,
+ * 48, 54
+ */
#define PWR_ACTIVE 0
@@ -140,7 +144,9 @@
/* Unit time count for the decision to enter PS mode */
u16 CheckCountForPS;
u8 boHasTxActivity;/* tx activity has occurred */
- u8 boMacPsValid; /* Power save mode obtained from H/W is valid or not */
+ u8 boMacPsValid; /* Power save mode obtained
+ * from H/W is valid or not
+ */
/* Rate */
u8 TxRateMode; /*
@@ -162,35 +168,57 @@
u8 NumOfBRate;
u8 NumOfSRate;
- u8 NumOfDsssRateInSRate; /* number of DSSS rates in supported rate set */
+ u8 NumOfDsssRateInSRate; /* number of DSSS rates in
+ * supported rate set
+ */
u8 reserved1;
u32 dwBasicRateBitmap; /* bit map of basic rates */
- u32 dwSupportRateBitmap; /* bit map of all support rates including basic and operational rates */
+ u32 dwSupportRateBitmap; /* bit map of all support rates
+ * including basic and operational
+ * rates
+ */
/* For SME/MLME handler */
- u16 wOldSTAindex; /* valid when boHandover=TRUE, store old connected STA index */
- u16 wConnectedSTAindex; /* Index of peerly connected AP or IBSS in the descriptionset. */
- u16 Association_ID; /* The Association ID in the (Re)Association Response frame. */
- u16 ListenInterval; /* The listen interval when SME invoking MLME_ (Re)Associate_Request(). */
+ u16 wOldSTAindex; /* valid when boHandover=TRUE,
+ * store old connected STA index
+ */
+ u16 wConnectedSTAindex; /* Index of peerly connected AP or
+ * IBSS in the descriptionset.
+ */
+ u16 Association_ID; /* The Association ID in the
+ * (Re)Association Response frame.
+ */
+ u16 ListenInterval; /* The listen interval when SME invoking
+ * MLME_ (Re)Associate_Request().
+ */
struct radio_off RadioOffStatus;
u8 Reserved0[2];
- u8 boMsRadioOff; /* Ndis demands to be true when set Disassoc. OID and be false when set SSID OID. */
+ u8 boMsRadioOff; /* Ndis demands to be true when set
+ * Disassoc. OID and be false when
+ * set SSID OID.
+ */
u8 bAntennaNo; /* which antenna */
- u8 bConnectFlag; /* the connect status flag for roaming task */
+ u8 bConnectFlag; /* the connect status flag for
+ * roaming task
+ */
u8 RoamStatus;
u8 reserved7[3];
- struct chan_info CurrentChan; /* Current channel no. and channel band. It may be changed by scanning. */
+ struct chan_info CurrentChan; /* Current channel no. and channel band.
+ * It may be changed by scanning.
+ */
u8 boHandover; /* Roaming, Handover to other AP. */
u8 boCCAbusy;
- u16 CWMax; /* It may not be the real value that H/W used */
+ u16 CWMax; /* It may not be the real value
+ * that H/W used
+ */
u8 CWMin; /* 255: set according to 802.11 spec. */
u8 reserved2;
@@ -200,7 +228,9 @@
u8 bPreambleMode; /* AUTO, s32 */
u8 boNonERPpresent;
- u8 boProtectMechanism; /* H/W will take the necessary action based on this variable */
+ u8 boProtectMechanism; /* H/W will take the necessary action
+ * based on this variable
+ */
u8 boShortPreamble; /* Same here */
u8 boShortSlotTime; /* Same here */
u8 reserved_3;
@@ -213,8 +243,12 @@
u32 HwBssidValid;
/* For scan list */
- u8 BssListCount; /* Total count of valid descriptor indexes */
- u8 boReceiveUncorrectInfo; /* important settings in beacon/probe resp. have been changed */
+ u8 BssListCount; /* Total count of valid
+ * descriptor indexes
+ */
+ u8 boReceiveUncorrectInfo; /* important settings in beacon/probe
+ * resp. have been changed
+ */
u8 NoOfJoinerInIbss;
u8 reserved_4;
@@ -228,7 +262,9 @@
*/
u8 JoinerInIbss[(MAX_BSS_DESCRIPT_ELEMENT + 3) & ~0x03];
- /* General Statistics, count at Rx_handler or Tx_callback interrupt handler */
+ /* General Statistics, count at Rx_handler or
+ * Tx_callback interrupt handler
+ */
u64 GS_XMIT_OK; /* Good Frames Transmitted */
u64 GS_RCV_OK; /* Good Frames Received */
u32 GS_RCV_ERROR; /* Frames received with crc error */
@@ -248,10 +284,18 @@
u32 _dot11WEPUndecryptableCount;
u32 _dot11FrameDuplicateCount;
- struct chan_info IbssChanSetting; /* 2B. Start IBSS Channel setting by registry or WWU. */
- u8 reserved_5[2]; /* It may not be used after considering RF type, region and modulation type. */
+ struct chan_info IbssChanSetting; /* 2B. Start IBSS Channel
+ * setting by registry or
+ * WWU.
+ */
+ u8 reserved_5[2]; /* It may not be used after
+ * considering RF type, region
+ * and modulation type.
+ */
- u8 reserved_6[2]; /* two variables are for wep key error detection */
+ u8 reserved_6[2]; /* two variables are for wep
+ * key error detection
+ */
u32 bWepKeyError;
u32 bToSelfPacketReceived;
u32 WepKeyDetectTimerCount;